WorldWideScience

Sample records for fluorosilicone acrylate rgp

  1. Advances in Research on Fluoro-silicon Modified Acrylic Resin and Coating%氟硅改性丙烯酸酯树脂及涂料的研究进展

    Institute of Scientific and Technical Information of China (English)

    张贺; 张连红; 梁红玉; 李彦琦

    2011-01-01

    随着社会的发展和人民生活水平的提高,人们对涂料的要求也越来越高.环保型涂料已日益发展成为各国研究的重点和热点.氟硅改性丙烯酸酯树脂涂料具有良好的保光保色性,附着力强,光亮丰满及优良的耐候性,耐沾污性,疏水疏油性,耐酸耐碱性和抗腐蚀性等优点.因此其具有一定的经济意义和研究价值.介绍了氟硅改性丙烯酸酯树脂的几种制备方法,同时也综述了氟硅改性丙烯酸酯树脂涂料的不同方面应用并对其发展前景进行了展望.%With the raise of living standard and social development, people's requirements in the coatings are getting higher and higher. Environ ment-friendly coatings have become the focus of research in all countries. Fluoro-silicon modified acrylic resin coating has good color and luster re tention, adhesion and glossy properties. It also has excellent weatherability, smudge resistance, hydrophobic and oleophobic performance, acid, alkali and corrosion resistance. Therefore it has certain economic significance and value for study. Several preparation methods of fluoro-silicone modified acrylic resin are introduced. The applications of fluoro-silicone modified acrylic resin in different fields and its development are also summarized.

  2. Synthetic Technology and Application of the Waterborne Fluoro-Silicon Modified Acrylic Resin and Coating%水性氟硅改性丙烯酸树脂的合成及涂膜性能研究

    Institute of Scientific and Technical Information of China (English)

    黄守成; 刘晓国

    2013-01-01

    The waterborne fluoro modified acrylic synthesized fully with fluorinated acrylate monomer will provide both hydrophobic and oleophobic properties,but cause the problems of foaming and foam stabilization at the same time.In order to avoid this problem,a cyclic siloxane prepolymer was synthesized by ring opening polymerization,which was then introduced into the fluoro-contaning acrylic resin chain acrylic by free radical polymerization,eliminating the defect of foaming and foam stabilization.In addition,the devlopment of waterbone of fluorine silicone modified acrylic resin has a significance on environmental protection.%合成具有足够疏水和疏油性能的水性含氟丙烯酸树脂,全部采用含氟丙烯酸酯单体,其在提供树脂具有疏水和疏油性能的同时,也会带来树脂容易起泡和稳泡的缺陷,为此,采用开环聚合合成环硅氧烷预聚物,将环硅氧烷预聚物引入水性含氟丙烯酸树脂分子链中,可以消除因含氟单体引入产生的起泡和稳泡缺陷.

  3. Fluorosilicone and silicone o-ring aging study.

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Robert; Gillen, Kenneth T.

    2007-10-01

    Fluorosilicone o-ring aging studies were performed. These studies examined the compressive force loss of fluorosilicone o-rings at accelerated (elevated) temperatures and were then used to make predictions about force loss at room temperature. The results were non-Arrhenius with evidence for a lowering in Arrhenius activation energies as the aging temperature was reduced. The compression set of these fluorosilicone o-rings was found to have a reasonably linear correlation with the force loss. The aging predictions based on using the observed curvature of the Arrhenius aging plots were validated by field aged o-rings that yielded degradation values reasonably close to the predictions. Compression set studies of silicone o-rings from a previous study resulted in good correlation to the force loss predictions for the fluorosilicone o-rings from this study. This resulted in a preliminary conclusion that an approximately linear correlation exists between compression set and force decay values for typical fluorosilicone and silicone materials, and that the two materials age at similar rates at low temperatures. Interestingly, because of the observed curvature of the Arrhenius plots available from longer-term, lower temperature accelerated exposures, both materials had faster force decay curves (and correspondingly faster buildup of compression set) at room temperature than anticipated from typical high-temperature exposures. A brief study on heavily filled conducting silicone o-rings resulted in data that deviated from the linear relationship, implying that a degree of caution must be exercised about any general statement relating force decay and compression set.

  4. License - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...e Database Description Download License Update History of This Database Site Policy | Contact Us License - RGP physicalmap | LSDB Archive ...

  5. Plasma graft of poly(ethylene glycol) methyl ether methacrylate (PEGMA) on RGP lens surface for reducing protein adsorption

    Science.gov (United States)

    Shiheng, Yin; Li, Ren; Yingjun, Wang

    2017-01-01

    Poly(ethylene glycol) methyl ether methacrylate (PEGMA) was grafted on fluorosilicone acrylate rigid gas permissible contact lens surface by means of argon plasma induced polymerization to improve surface hydrophilicity and reduce protein adsorption. The surface properties were characterized by contact angle measurement, x-ray photoelectron spectroscopy (XPS) and atomic force microscopy respectively. The surface protein adsorption was evaluated by lysozyme solution immersion and XPS analysis. The results indicated that a thin layer of PEGMA was successfully grafted. The surface hydrophilicity was bettered and surface free energy increased. The lysozyme adsorption on the lens surface was reduced greatly. The study was supported by National Natural Science Foundation of China (No. 51273072).

  6. Download - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...e File Simple search and download 1 README README_e.html - 2 YAC contig information rgp_physicalmap_yac_cont...igs.zip (1 KB) Simple search and download 3 YAC clone information rgp_physicalmap_yac_clones.zip (18.7 KB) S...imple search and download 4 Insert size of YAC clones rgp_physicalmap_insert_size...ase Description Download License Update History of This Database Site Policy | Contact Us Download - RGP physicalmap | LSDB Archive ...

  7. Quantification of Porphyromonas gingivalis by real time PCR : new primers targeting the rgpA and rgpB gene encoding RGP

    OpenAIRE

    KAMAGUCHI,Arihide/NAKAMURA,Reiko/WATANABE,Toshihiro/OHYAMA,Tohru/BABA,Hisae

    2003-01-01

    We designed new primers for the quantification of Porphyromonas gingivalis by real time PCR. The new primer set targeted the rgpA and rgpB genes that encode arginine specific cysteine proteinase (Arggingipain or Rgp), one of the putative pathogenic factors of P. gingivalis. The PCR product obtained using our primers showed no by-products by melting curve analysis. The PCR product sequence showed no significant matches to other sequences by BLAST searching of genetic databases except for match...

  8. Mixed Matrix Silicone and Fluorosilicone/Zeolite 4A Membranes for Ethanol Dehydration by Pervaporation

    Science.gov (United States)

    The ability of homogeneous and mixed matrix membranes prepared using standard silicone rubber, poly(dimethylsiloxane) (PDMS), and fluorosilicone rubber, poly(trifluoropropylmethylsiloxane) (PTFPMS), to dehydrate ethanol by pervaporation was evaluated. Although PDMS is generally c...

  9. Update History of This Database - RGP gmap2000 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available glish archive site is opened. 2013/04/01 The URL of RGP gmap2000 is changed to ... http://rgp.dna.affrc.go.jp/E/public...data/geneticmap2000/index.html . 2000/11/30 RGP gmap2000 (http://rgp.dna.affrc.go.jp/publicdata/genet

  10. Update History of This Database - RGP gmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available chive site is opened. 2013/04/01 The URL of RGP gmap is changed to ... http://rgp.dna.affrc.go.jp/E/publicdata/...naturegenetics/ricegmap.html . 1994/08/08 RGP gmap (http://rgp.dna.affrc.go.jp/publicdata/naturegenetics/ric

  11. Update History of This Database - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available chive site is opened. 2013/04/01 The URL of RGP caps is changed to ... http://rgp.dna.affrc.go.jp/E/publicdata/...caps/index.html . 2002/02/10 RGP caps (http://rgp.dna.affrc.go.jp/publicdata/caps/index.html) is opened. Abo

  12. Update History of This Database - RGP estmap2001 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available 1 English archive site is opened. 2013/04/01 The URL of RGP estmap2001 is changed to ... http://rgp.dna.affrc.go.jp/E/public...data/estmap2001/index.html . 2002/02/16 RGP estmap2001 (http://rgp.dna.affrc.go.jp/publicdata/e

  13. Update History of This Database - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available h archive site is opened. 2013/04/01 The URL of RGP gmap98 is changed to ... http://rgp.dna.affrc.go.jp/E/public...data/geneticmap98/geneticmap98.html . 1998/01/17 RGP gmap98 (http://rgp.dna.affrc.go.jp/publicdata/geneticm

  14. Expression and characterization of streptococcal rgp genes required for rhamnan synthesis in Escherichia coli.

    Science.gov (United States)

    Shibata, Yukie; Yamashita, Yoshihisa; Ozaki, Kazuhisa; Nakano, Yoshio; Koga, Toshihiko

    2002-06-01

    Six genes (rgpA through rgpF) that were involved in assembling the rhamnose-glucose polysaccharide (RGP) in Streptococcus mutans were previously identified (Y. Yamashita, Y. Tsukioka, K. Tomihisa, Y. Nakano, and T. Koga, J. Bacteriol. 180:5803-5807, 1998). The group-specific antigens of Lancefield group A, C, and E streptococci and the polysaccharide antigen of Streptococcus sobrinus have the same rhamnan backbone as the RGP of S. mutans. Escherichia coli harboring plasmid pRGP1 containing all six rgp genes did not synthesize complete RGP. However, E. coli carrying a plasmid with all of the rgp genes except for rgpE synthesized the rhamnan backbone of RGP without glucose side chains, suggesting that in addition to rgpE, another gene is required for glucose side-chain formation. Synthesis of the rhamnan backbone in E. coli required the initiation of transfer of N-acetylglucosamine to a lipid carrier and the expression of the rgpC and rgpD genes encoding the putative ABC transporter specific for RGP. The similarities in RGP synthesis between E. coli and S. mutans suggest common pathways for rhamnan synthesis. Therefore, we evaluated the rhamnosyl polymerization process in E. coli by high-resolution sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the lipooligosaccharide (LOS). An E. coli transformant harboring rgpA produced the LOS modified by the addition of a single rhamnose residue. Furthermore, the rgpA, rgpB, and rgpF genes of pRGP1 were independently mutated by an internal deletion, and the LOS chemotypes of their transformants were examined. The transformant with an rgpA deletion showed the same LOS profile as E. coli without a plasmid. The transformant with an rgpB deletion showed the same LOS profile as E. coli harboring rgpA alone. The transformant with an rgpF deletion showed the LOS band with the most retarded migration. On the basis of these results, we speculated that RgpA, RgpB, and RgpF, in that order, function in rhamnan polymerization.

  15. Expression and Characterization of Streptococcal rgp Genes Required for Rhamnan Synthesis in Escherichia coli†

    Science.gov (United States)

    Shibata, Yukie; Yamashita, Yoshihisa; Ozaki, Kazuhisa; Nakano, Yoshio; Koga, Toshihiko

    2002-01-01

    Six genes (rgpA through rgpF) that were involved in assembling the rhamnose-glucose polysaccharide (RGP) in Streptococcus mutans were previously identified (Y. Yamashita, Y. Tsukioka, K. Tomihisa, Y. Nakano, and T. Koga, J. Bacteriol. 180:5803-5807, 1998). The group-specific antigens of Lancefield group A, C, and E streptococci and the polysaccharide antigen of Streptococcus sobrinus have the same rhamnan backbone as the RGP of S. mutans. Escherichia coli harboring plasmid pRGP1 containing all six rgp genes did not synthesize complete RGP. However, E. coli carrying a plasmid with all of the rgp genes except for rgpE synthesized the rhamnan backbone of RGP without glucose side chains, suggesting that in addition to rgpE, another gene is required for glucose side-chain formation. Synthesis of the rhamnan backbone in E. coli required the initiation of transfer of N-acetylglucosamine to a lipid carrier and the expression of the rgpC and rgpD genes encoding the putative ABC transporter specific for RGP. The similarities in RGP synthesis between E. coli and S. mutans suggest common pathways for rhamnan synthesis. Therefore, we evaluated the rhamnosyl polymerization process in E. coli by high-resolution sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the lipooligosaccharide (LOS). An E. coli transformant harboring rgpA produced the LOS modified by the addition of a single rhamnose residue. Furthermore, the rgpA, rgpB, and rgpF genes of pRGP1 were independently mutated by an internal deletion, and the LOS chemotypes of their transformants were examined. The transformant with an rgpA deletion showed the same LOS profile as E. coli without a plasmid. The transformant with an rgpB deletion showed the same LOS profile as E. coli harboring rgpA alone. The transformant with an rgpF deletion showed the LOS band with the most retarded migration. On the basis of these results, we speculated that RgpA, RgpB, and RgpF, in that order, function in rhamnan polymerization

  16. Download - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...atabase Description Download License Update History of This Database Site Policy | Contact Us Download - RGP caps | LSDB Archive ...

  17. Insert size of YAC clones - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...a contents Insert size of YAC clones in the physical map Data file File name: rgp_physicalmap_insert_size.zi...p File URL: ftp://ftp.biosciencedbc.jp/archive/rgp-physicalmap/LATEST/rgp_physical...map_insert_size.zip File size: 3.4 KB Simple search URL http://togodb.biosciencedbc.jp/togodb/view/rgp_physical...ase Description Download License Update History of This Database Site Policy | Contact Us Insert size of YAC clones - RGP physicalmap | LSDB Archive ...

  18. Update History of This Database - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...map Update History of This Database Date Update contents 2015/07/07 RGP physicalmap English arch...ive site is opened. 2013/04/01 The URL of RGP physicalmap is changed to ... http://rgp.dna.affrc.go.jp/E/publicdata/physicalmap/physical...map.html . 1997/07/09 RGP physicalmap (http://rgp.dna.affrc.go.jp/publicdata/phys...icalmap/physicalmap.html) is opened. Joomla SEF URLs by Artio About This Database D

  19. Fluorosilicone multi-block copolymers tethering quaternary ammonium salt groups for antimicrobial purpose

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Fang; Qin, Xiaoshuai; Li, Yancai; Ren, Lixia; Zhao, Yunhui, E-mail: zhaoyunhui@tju.edu.cn; Yuan, Xiaoyan

    2015-08-30

    Highlights: • QAS-containing fluorosilicone multi-block copolymers were synthesized. • The block length of PHFBMA in the copolymers was tailored via RAFT polymerization. • Surface roughness of the copolymers decreased with the increased PHFBMA content. • A certain length of PHFBMA block enhanced C−N{sup +} percentage on the surface. - Abstract: Symmetrically structured fluorosilicone multi-block copolymers containing poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(hexafluorobutyl methacrylate) (PHFBMA) were sequentially synthesized via reversible addition–fragmentation chain transfer polymerization, using a polydimethylsiloxane (PDMS) chain transfer agent with dithiocarbonate groups at both ends. Then, the CBABC-type block copolymers were quaternized with n-octyliodide to tether quaternary ammonium salt (QAS) groups in the PDMAEMA blocks for the antimicrobial use. The obtained fluorosilicone copolymers showed clear variations in the C-N{sup +} composition and surface morphology on their films depending on the content of the PHFBMA blocks, which were characterized by X-ray photoelectron spectroscopy and atomic force microscopy, respectively. The results indicated that the symmetrical CBABC structure favored PDMS and QAS tethered blocks migrating to the film surface. With the mass percentage of the PHFBMA increased from 0 to 32.5%, the surface roughness of the copolymer film decreased gradually with a tendency to form a smooth surface. Owing to the surface properties, fluorosilicone multi-block copolymers containing a certain amount of PHFBMA with higher C-N{sup +} content and relatively smooth morphology demonstrated obvious antimicrobial activity against Gram-positive bacteria, Bacillus subtilis and Gram-negative bacteria, Escherichia coli. The functionalized multi-block copolymers based on fluorosilicone and QAS groups would have potential applications in antimicrobial coatings.

  20. Expression and Characterization of Streptococcal rgp Genes Required for Rhamnan Synthesis in Escherichia coli†

    OpenAIRE

    Shibata, Yukie; Yamashita, Yoshihisa; Ozaki, Kazuhisa; Nakano, Yoshio; Koga, Toshihiko

    2002-01-01

    Six genes (rgpA through rgpF) that were involved in assembling the rhamnose-glucose polysaccharide (RGP) in Streptococcus mutans were previously identified (Y. Yamashita, Y. Tsukioka, K. Tomihisa, Y. Nakano, and T. Koga, J. Bacteriol. 180:5803-5807, 1998). The group-specific antigens of Lancefield group A, C, and E streptococci and the polysaccharide antigen of Streptococcus sobrinus have the same rhamnan backbone as the RGP of S. mutans. Escherichia coli harboring plasmid pRGP1 containing al...

  1. Download - RGP estmap2001 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us RGP estma...ST mapping results rgp_estmap2001_main.zip (597 B) Simple search and download 3 Details of rice EST mapping results rgp_estma...p2001_detail.zip (242 KB) Simple search and download 4 The rice transcript map rgp_estmap20...t is, access [here]. About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Download - RGP estmap2001 | LSDB Archive ...

  2. YAC clone information - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...ts YAC clones selected with DNA markers Data file File name: rgp_physicalmap_yac_clones.zip File URL: ftp://...ftp.biosciencedbc.jp/archive/rgp-physicalmap/LATEST/rgp_physicalmap_yac_clones.zi...p File size: 18.7 KB Simple search URL http://togodb.biosciencedbc.jp/togodb/view/rgp_physicalmap_yac_clones...ical map image The file name of rice physical map Order Linkage order Marker Marker name Distance (cM) The g

  3. YAC contig information - RGP physicalmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP physical...ents YAC contigs on the rice chromosomes Data file File name: rgp_physicalmap_yac_contigs.zip File URL: ftp:...//ftp.biosciencedbc.jp/archive/rgp-physicalmap/LATEST/rgp_physicalmap_yac_contigs....zip File size: 1 KB Simple search URL http://togodb.biosciencedbc.jp/togodb/view/rgp_physicalmap_yac_contig...gion number Physical map image The file name of rice physical map First marker First DNA marker Distance of

  4. Download - RGP gmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ... FTP Joomla SEF URLs by Artio About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Download - RGP gmap | LSDB Archive ...

  5. Southern images - RGP gmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP gmap Southern images Data detail Data name Southern images DOI 10.18908/lsdba.nbdc00318-...01-003 Description of data contents Parents Southern hybridization image files. Data file File name: rgp_gmap_southe...rn_image.zip File URL: ftp://ftp.biosciencedbc.jp/archive/rgp-gmap/LATEST/rgp_gmap_southern_image.zi...p File size: 37.3 MB Simple search URL - Data acquisition method Southern hybridi...zation Data analysis method For genotype segregation in F2 plants, Southern hybridization was performed with DNAs digested with the

  6. Southern images - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP gmap98 Southern images Data detail Data name Southern images DOI 10.18908/lsdba.nbdc0031...8-02-006 Description of data contents Parental Southern hybridization image files. Data file File name: rgp_gmap98_southe...rn_image.zip File URL: ftp://ftp.biosciencedbc.jp/archive/rgp-gmap98/LATEST/rgp_gmap98_southern..._image.zip File size: 69.2 MB Simple search URL - Data acquisition method Souther...n hybridization Data analysis method For genotype segregation in F2 plants, Southern hybridization was perfo

  7. License - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP caps License Lice...nce with the terms and conditions of the license described below. The license specifies the license terms re...garding the use of this database and the requirements you must follow in using this database. The lice...based genetic markers on rice chromosomes © National Institute of Agrobiological Sciences lice...on-Share Alike 2.1 Japan is found here . With regard to this database, you are licensed to: freely access pa

  8. License - RGP gmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP gmap License Lice...nce with the terms and conditions of the license described below. The license specifies the license terms re...garding the use of this database and the requirements you must follow in using this database. The lice...NETIC MAP IN NATURE GENETICS © National Institute of Agrobiological Sciences lice...e 2.1 Japan is found here . With regard to this database, you are licensed to: freely access part or whole o

  9. Diagnostic evaluation of a nanobody with picomolar affinity toward the protease RgpB from Porphyromonas gingivalis

    DEFF Research Database (Denmark)

    Skottrup, Peter Durand; Leonard, Paul; Kaczmarek, Jakub Zbigniew

    2011-01-01

    to select one nanobody toward RgpB with picomolar affinity. The nanobody was used in an inhibition assay for detection of RgpB in buffer as well as in saliva. The nanobody was highly specific for RgpB given that it did not bind to the homologous gingipain HRgpA. This indicated the presence of a binding...

  10. Purification and characterisation of recombinant His-tagged RgpB gingipain from Porphymonas gingivalis.

    Science.gov (United States)

    Veillard, Florian; Potempa, Barbara; Guo, Yonghua; Ksiazek, Miroslaw; Sztukowska, Maryta N; Houston, John A; Koneru, Lahari; Nguyen, Ky-Anh; Potempa, Jan

    2015-04-01

    Gingipain proteases are important virulence factors from the periodontal pathogen Porphyromonas gingivalis and are the target of many in vitro studies. Due to their close biochemical properties, purification of individual gingipains is difficult and requires multiple chromatographic steps. In this study, we demonstrate that insertion of a hexahistidine affinity tag upstream of a C-terminal outer membrane translocation signal in RgpB gingipain leads to the secretion of a soluble, mature form of RgpB bearing the affinity tag that can easily be purified by nickel-chelating affinity chromatography. The final product obtained high yielding high purity is biochemically indistinguishable from the native RgpB enzyme.

  11. List of isozyme loci - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP gmap98 List of isozyme loci Data detail Data name List of isozyme loci DOI 10.18908/lsdb...he present high-density linkage map, and that were putatively identified as isozyme genes. Data file File name: rgp_gmap98_iso...gmap98/LATEST/rgp_gmap98_isozyme_loci.zip File size: 611 B Simple search URL http://togodb.biosciencedbc.jp/...0001 were considered as functionally identical clones. And we have selected the ones that hit the isozyme ge...his Database Database Description Download License Update History of This Database Site Policy | Contact Us List of isozyme loci - RGP gmap98 | LSDB Archive ...

  12. Download - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...tio About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Download - RGP gmap98 | LSDB Archive ...

  13. The linked list of data - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...abase Description Download License Update History of This Database Site Policy | Contact Us The linked list of data - RGP gmap98 | LSDB Archive ...

  14. Download - RGP gmap2000 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...out This Database Database Description Download License Update History of This Database Site Policy | Contact Us Download - RGP gmap2000 | LSDB Archive ...

  15. Genotype data - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available ic code by MAPMAKER About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Genotype data - RGP gmap98 | LSDB Archive ...

  16. Statistics of DNA Markers - RGP gmap | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP gmap Statistics of DNA Markers Data detail Data name Statistics of DNA Markers DOI 10.18...908/lsdba.nbdc00318-01-001 Description of data contents Statistics of DNA markers that were used to create t...iption Download License Update History of This Database Site Policy | Contact Us Statistics of DNA Markers - RGP gmap | LSDB Archive ...

  17. Statistics information of rice EST mapping results - RGP estmap2001 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP estmap2001 Statistics information of rice EST mapping results Data detail Data name Statistics...of This Database Site Policy | Contact Us Statistics information of rice EST mapping results - RGP estmap2001 | LSDB Archive ...

  18. License - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available RGP gmap98 License License to Use This Database Last updated : 2015/02/12 You may use this database in compl...regarding the use of this database and the requirements you must follow in using this database.... The license for this database is specified in the Creative Commons Attribution-Share Alike 2....1 Japan . If you use data from this database, please be sure attribute this database as follows: RGP: A HIGH....1 Japan is found here . With regard to this database, you are licensed to: freely access part or whole of this database

  19. Information of the markers in each chromosome - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available for RFLP linkage analysis, we designed unique primer pairs for the specific amplification of genome. The...List Contact us RGP caps Information of the markers in each chromosome Data detail Data name Information of the... markers in each chromosome DOI 10.18908/lsdba.nbdc00318-05-001 Description of data contents Information of the...le search URL http://togodb.biosciencedbc.jp/togodb/view/rgp_caps_main#en Data acquisition method STS markers : The... 161 STS markers have been developed using clone-specific sequences (3'end) designed from the EST seq

  20. 可聚合乳化剂对氟硅拒水剂拒水性能的影响%Effect of polymerizable emulsifier on water repellency of fluorosilicone water repellent agent

    Institute of Scientific and Technical Information of China (English)

    李智斌; 樊增禄; 李庆; 蔡信彬

    2016-01-01

    以甲基丙烯酸月桂酯(LMA)、甲基丙烯酸甲酯(MMA)、甲基丙烯酸十二氟庚酯(G-04)、乙烯基三乙氧基硅烷(KH-151)为反应单体,采用半连续乳液聚合法合成了氟硅改性丙烯酸酯无皂乳液。探讨了4种可聚合乳化剂(A、B、C、D)对所合成氟硅拒水剂拒水性能的影响,并与采用阴离子型乳化剂制得的拒水剂进行了拒水性能比较。结果表明,与采用阴离子乳化剂合成的拒水剂相比,采用可聚合乳化剂制备的无皂拒水剂的拒水效果更佳;将可聚合乳化剂A、B按质量比2∶1进行复配时,拒水剂的拒水效果最佳;纯棉织物经拒水整理后对水的接触角可达138.6°,静水压可达2.83 kPa,表现出良好的拒水效果。%The fluorosilicone modified acrylate soap- free emulsion was synthesized by semi continuous emulsion polymerization, employing lauryl methacrylate (LMA), methyl methacrylate (MMA), dodecafluorohep⁃tyl methacrylate (G- 04) and triethoxyvinylsilane (KH- 151) as monomers. The influences of four polymerizable emulsifiers (A,B,C,D) on the water repel ency of the fluorosilicone water repel ent agent were discussed, and the water repel ency were compared with another water repel ent agent prepared by anionic emulsifier. The re⁃sults showed that the soap free water repel ent agent performed better water repel ency. The properties of flu⁃orosilicone water repel ent agent were the optimum when A and B were mixed as the mass ratio of 2∶1. The cotton fabric treated by soap free water repel ent agent exhibited good water repel ent properties with 138.6° of contact angle and 2.83 kPa of hydrostatic pressure.

  1. Database Description - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available e Research Project (1998-2004) Reference(s) Article title: Author name(s): Journal: Pubmed ID: Original website...iences URL of the original website http://rgp.dna.affrc.go.jp/E/publicdata/caps/index.html Operation start d

  2. Detailed information of DNA markers - RGP gmap2000 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available iosciencedbc.jp/togodb/view/rgp_gmap2000_marker#en Data acquisition method As the source of polymorphic DNA markers for map construct...ion, we used two types of cDNA clones (callus and roots)

  3. Database Description - RGP gmap2000 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available density RFLP linkage map publication of 1998. Features and manner of utilization of database The data are sh...ional Institute of Agrobiological Sciences URL of the original website http://rgp.dna.affrc.go.jp/E/publicda

  4. Database Description - RGP estmap2001 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available intenance site National Institute of Agrobiological Sciences URL of the original website (Suspended)http://rgp.dna.affrc.go.jp/E/publ...icdata/estmap2001/index.html Operation start date 2002/02/16 Last update date 2002/

  5. Database Description - RGP gmap98 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available nomy ID: 4530 Database description According to the publication of our high-densi...stitute of Agrobiological Sciences URL of the original website (Suspended)http://rgp.dna.affrc.go.jp/E/pub...licdata/geneticmap98/geneticmap98.html Operation start date 1998/01/17 Last update

  6. Multiple surface properties of worn RGP lenses and adhesion of Pseudomonas aeruginosa

    NARCIS (Netherlands)

    Bruinsma, Gerda; Rustema-Abbing, M; de Vries, Jacob; Busscher, HJ; van der Linden, M.L.; Hooymans, JMM; van der Mei, HC

    2003-01-01

    The aim of this study is to determine rigid gas permeable (RGP) lens surface properties prior to and after wear that are influential on adhesion of Pseudomonas aeruginosa. After 10 and 50 days of wear and after end-stage use, lenses were collected for determination of physico-chemical surface proper

  7. Genotipificación de los genes rgpA y kgp que codifican para las gingipaínas de Porphyromonas gingivalis Genotyping of rgpA and kgp genes encoding Pophyromonas gingivalis gingipains

    Directory of Open Access Journals (Sweden)

    L Abusleme

    2012-12-01

    Full Text Available Porphyromonas gingivalis es un microorganismo fuertemente asociado con la etiología de la periodontitis. Esta bacteria posee varios factores de virulencia, dentro de los que destacan las gingipaínas, debido a sus múltiples acciones relacionadas con la destrucción de la matriz extracelular del tejido conectivo periodontal, la modulación del sistema inmune del hospedero y la estimulación de la expresión de citoquinas pro-inflamatorias. Estas proteinasas tienen afinidades específicas siendo Arg-gingipaínas (RgpA y RgpB, codificadas por los genes rgpA y rgpB, respectivamente y Lys-gingipaínas (Kgp, codificada por el gen kgp. Se ha descrito que existen polimorfismos en los genes que codifican para esta proteinasas. El objetivo del presente estudio fue describir la frecuencia de los genotipos identificados para los genes rgpA y kgp en aislados clínicos de P. gingivalis, obtenidos desde pacientes con periodontitis. Para ello se utilizó amplificación por PCR de los genes rgpA y kgp, seguido de análisis de restricción. De un total de 47 aislados provenientes de 4 individuos con periodontitis crónica y 2 con periodontitis agresiva, se genotipificaron 38 aislados para el gen rgpA, exhibiendo la totalidad de éstos el patrón electroforético A (100%. Para el gen kgp se genotipificaron 43 aislados, presentando 28 de ellos (65.2% el perfil electroforético kgp-I y 15 aislados (34.8% el perfil kgp-II. En los aislados provenientes de un individuo fue posible apreciar ambos genotipos descritos para el gen kgp. Los resultados indican un predominio del patrón electroforético A (rgpA y que el genotipo kgp-I fue el más frecuentemente encontrado de los genotipos kgp.Porphyromonas gingivalis is a microorganism strongly associated with the etiology of periodontitis. This periodontal bacterium possesses an array of virulence factors, among which gingipains have a key importance, being involved with extracellular matrix destruction of periodontal

  8. Images of gel electrophoresis - RGP caps | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RGP caps Images of gel... electrophoresis Data detail Data name Images of gel electrophoresis Description of da...ta contents Detailed information and images of gel electrophoresis of each marker. Data file File name: rgp_...mM KCl, and 0.001% (w/v) gelatin), and 40 mM MgCl 2 in 20.0 μL volume. Amplification was performed in GeneAm...d 72°C (2 min), and a final cycle of 72°C for 7 min. The amplified DNA products were electrophoresed on 3.0% agarose gel

  9. Acrylate Systemic Contact Dermatitis.

    Science.gov (United States)

    Sauder, Maxwell B; Pratt, Melanie D

    2015-01-01

    Acrylates, the 2012 American Contact Dermatitis Society allergen of the year, are found in a range of products including the absorbent materials within feminine hygiene pads. When fully polymerized, acrylates are nonimmunogenic; however, if not completely cured, the monomers can be potent allergens.A 28-year-old woman is presented, who had her teeth varnished with Isodan (Septodont, Saint-Maur-des-Fossés, France) containing HEMA (2-hydroxyethyl methacrylate) with no initial reaction. Approximately 1 month later, the patient developed a genital dermatitis secondary to her feminine hygiene pads. The initial reaction resolved, but 5 months later, the patient developed a systemic contact dermatitis after receiving a second varnishing.The patient was dramatically patch test positive to many acrylates. This case demonstrates a reaction to likely unpolymerized acrylates within a feminine hygiene pad, as well as broad cross-reactivity or cosensitivity to acrylates, and possibly a systemic contact dermatitis with systemic re-exposure to unpolymerized acrylates.

  10. The rice transcript map - RGP estmap2001 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us RGP estmap2001 The rice transcript map Data detail Data name The rice transcript map DOI 10.... search URL - Data acquisition method YAC screening, DNA gel blot hybridization Data analysis method Figures contain the... rice genetic and YAC physical maps with the assigned EST sites. From left to right in each YAC ...imated physical distance (kb) of YAC contigs, YAC contig and EST sites (multiple sites of an EST are indicated by alphabets after the... name) are shown. Vertical bars on the left of EST names indicate the estimated dis

  11. The short-term effects of PMMA and RGP contact lens wear on keratometric behaviour: a pilot study*

    Directory of Open Access Journals (Sweden)

    E. Chetty

    2010-12-01

    Full Text Available This article represents the preliminary findings of a larger study that included 24 subjects that were equally divided into three groups, namely, the PMMA (polymethyl methacrylate group, the RGP(rigid gas permeable group and the control group. The aim of this study was to establish the short term effects (if any of PMMA and RGP contact lens wear on keratometric behaviour. A controlsubject was also included in the study to establish a reference fornormal diurnal changes in keratometric behaviour. Fifty successive auto-keratometric measurements were taken before and immediately after three hours of rigid contact lens wear for the first subject in the PMMA group and the first subject in the RGP group (experimental samples. Fifty successive auto-keratometric measurements were also taken on the first subject of the control group before and immediately after three hours of no lens wear (control sample. Data collected were analysed using multivariate statistical methods that in the past have been used infrequently in this area of study. This investigation revealed that, at least in these two randomly selected subjects, rigid contact lens wear appears to  influence keratometric behaviour (PMMA contact lenses more so than RGP contact lenses. (S Afr Optom 2010 69(4 173-181

  12. Acrylic mechanical bond tests

    Energy Technology Data Exchange (ETDEWEB)

    Wouters, J.M.; Doe, P.J.

    1991-02-01

    The tensile strength of bonded acrylic is tested as a function of bond joint thickness. 0.125 in. thick bond joints were found to posses the maximum strength while the acceptable range of joints varied from 0.063 in. to almost 0.25 in. Such joints are used in the Sudbury Neutrino Observatory.

  13. Hyperbranched urethane-acrylates

    Directory of Open Access Journals (Sweden)

    Tasić Srba

    2004-01-01

    Full Text Available The synthesis, characterization and UV-curing of hyperbranched urethaneacrylates (HB-UA were investigated in this study. They were evaluated as oli-gomers in model UV curable coatings. HB-UAs were synthesized by reaction of an aliphatic hyperbranched polyester of the second generation (HBRG2 and an isocyanate adduct, obtained by the reaction of isophoronediisocyana-te and different hydroxy alkyl acrylates. Their thermal properties and viscosities depend on the degree of modification of HBRG2 and the type of hydroxy alkyl acrylate used. The introduction of a flexible alkoxylated spacer between the HBP core and acrylate end groups reduces steric hindrance by moving the cross linkable acrylate groups away from the HBP core and increase its reactivity. Due to the presence of abstractable H-atoms in the α-position to the ether links, HB-UAs based on poly(ethylene oxide monoacrylate are very reactive and do not show oxygen inhibition. The obtained coatings combine a high cross linking density with flexible segments between the cross links, which results in a good compromise between hardness and flexibility and have the potential to be used in different UV-curing applications.

  14. Auxin regulated OsRGP1 and OsSuS are involved in the gravitropic bending of rice shoot bases

    Science.gov (United States)

    Hu, Liwei; Cui, Dayong; Cai, Weiming

    The gravitropic bending of rice shoot in horizontal position results from differential elongation of cells between two halves of shoot bases. In our experiment, reversibly glycosylated polypeptide (OsRGP1), sucrose synthase (OsSuS) genes which related to sugar metabolism were identified by suppressive subtractive hybridization (SSH) in gravitropism in rice shoot bases. Realtime RT-PCR were used to study the expression of two genes in detail. OsRGP1 and OsSuS were differentially induced in the abaxial (lower) side of rice shoot bases during gravitropism. The OsRGP1 and OsSuS expression were regulated by auxin. The sequence analysis of their promoters was in concurrence. TIBA treatment could inhibit the asymmetrical expression of OsRGP1 and OsSuS in gravitropism in rice shoot bases. In addition, there was more hexose in the lower side of rice shoot bases in gravitropism. Our data suggested that asymmetric redistribution of auxin following gravistimulation resulted in the different localized expression of OsRGP1 and OsSuS. It is possible that asymmetrical expression of OsSuS resulted in the asymmetrical distribution of hexose and asymmetrical expression of OsRGP1 induced the synthesis of cell wall polysaccharides in the lower half of rice shoot bases. Hexose and cell wall polysaccharides accumulation in lower side of rice shoot bases might contribute to the cell expansion, thus leading to gravitropic bending.

  15. Expression of rabies glycoprotein and ricin toxin B chain (RGP-RTB) fusion protein in tomato hairy roots: a step towards oral vaccination for rabies.

    Science.gov (United States)

    Singh, Ankit; Srivastava, Subhi; Chouksey, Ankita; Panwar, Bhupendra Singh; Verma, Praveen C; Roy, Sribash; Singh, Pradhyumna K; Saxena, Gauri; Tuli, Rakesh

    2015-04-01

    Transgenic hairy roots of Solanum lycopersicum were engineered to express a recombinant protein containing a fusion of rabies glycoprotein and ricin toxin B chain (rgp-rtxB) antigen under the control of constitutive CaMV35S promoter. Asialofetuin-mediated direct ELISA of transgenic hairy root extracts was performed using polyclonal anti-rabies antibodies (Ab1) and epitope-specific peptidal anti-RGP (Ab2) antibodies which confirmed the expression of functionally viable RGP-RTB fusion protein. Direct ELISA based on asialofetuin-binding activity was used to screen crude protein extracts from five transgenic hairy root lines. Expressions of RGP-RTB fusion protein in different tomato hairy root lines varied between 1.4 and 8 µg in per gram of tissue. Immunoblotting assay of RGP-RTB fusion protein from these lines showed a protein band on monomeric size of ~84 kDa after denaturation. Tomato hairy root line H03 showed highest level of RGP-RTB protein expression (1.14 %) and was used further in bench-top bioreactor for the optimization of scale-up process to produce large quantity of recombinant protein. Partially purified RGP-RTB fusion protein was able to induce the immune response in BALB/c mice after intra-mucosal immunization. In the present investigation, we have not only successfully scaled up the hairy root culture but also established the utility of this system to produce vaccine antigen which subsequently will reduce the total production cost for implementing rabies vaccination programs in developing nations. This study in a way aims to provide consolidated base for low-cost preparation of improved oral vaccine against rabies.

  16. [Acrylic resin removable partial dentures

    NARCIS (Netherlands)

    Baat, C. de; Witter, D.J.; Creugers, N.H.J.

    2011-01-01

    An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of

  17. Acrylic Acid and Esters Will Be Oversupply

    Institute of Scientific and Technical Information of China (English)

    Zheng Chengwang

    2007-01-01

    @@ Drastic capacity growth The production capacity of acrylic acid in China has grown drastically in recent years. With the completion of the 80 thousand t/a acrylic acid and 130 thous and t/a acrylic ester project in Shenyang Paraffin Chemical Industrial Co., Ltd., (CCR2006,No. 31) the capacity of acrylic acid in China has reached 882 thousand t/a.

  18. Recombinant envelope protein (rgp90) ELISA for equine infectious anemia virus provides comparable results to the agar gel immunodiffusion.

    Science.gov (United States)

    Reis, Jenner K P; Diniz, Rejane S; Haddad, João P A; Ferraz, Isabella B F; Carvalho, Alex F; Kroon, Erna G; Ferreira, Paulo C P; Leite, Rômulo C

    2012-03-01

    Equine infectious anemia (EIA) is an important viral infection affecting horses worldwide. The course of infection is accompanied generally by three characteristic stages: acute, chronic and inapparent. There is no effective EIA vaccine or treatment, and the control of the disease is based currently on identification of EIAV inapparent carriers by laboratory tests. Recombinant envelope protein (rgp90) was expressed in Escherichia coli and evaluated via enzyme-linked immunosorbent assay (ELISA). There was an excellent agreement (95.42%) between the ELISA results using rgp90 and agar gel immunodiffusion test results. AGID is considered the "gold-standard" serologic test for equine infectious anemia (EIA). After 1160 serum samples were tested, the relative sensitivity and specificity of the ELISA were 96.1% and 96.4%, respectively. Moreover, analysis diagnostic accuracy of the ELISA was performed. The ELISA proved robust. Furthermore, good reproducibility was observed for the negative controls and, positive controls for all plates tested. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Two decades of occupational (meth)acrylate patch test results and focus on isobornyl acrylate

    NARCIS (Netherlands)

    Christoffers, Wietske A; Coenraads, Pieter Jan; Schuttelaar, Marie-Louise A

    2013-01-01

    BACKGROUND: Acrylates constitute an important cause of occupational contact dermatitis. Isobornyl acrylate sensitization has been reported in only 2 cases. We encountered an industrial process operator with occupational contact dermatitis caused by isobornyl acrylate. OBJECTIVES: (i) To investigate

  20. Bonding auto-polymerising acrylic resin to acrylic denture teeth.

    LENUS (Irish Health Repository)

    Nagle, Susan

    2009-09-01

    This study investigated the effect of surface treatments on the shear bond strength of an auto-polymerising acrylic resin cured to acrylic denture teeth. The surface treatments included a combination of grit-blasting and\\/or wetting the surface with monomer. Samples were prepared and then stored in water prior to shear testing. The results indicated that the application of monomer to the surface prior to bonding did not influence the bond strength. Grit blasting was found to significantly increase the bond strength.

  1. 硫化类型对 RTV-2氟硅密封胶性能的影响%Effects of Vulcanization Reagents on Properties of RTV-2 Fluorosilicone Sealants

    Institute of Scientific and Technical Information of China (English)

    郭琳琳; 肖雯静; 吕亚非; 齐士成

    2013-01-01

    以自制的端羟基氟硅共聚物为基础聚合物, ZnO为填料,二月桂酸二丁基锡为催化剂,分别采用正硅酸乙酯、甲基三丁酮肟基硅烷( D31)、甲基三乙酰氧基硅烷( D17)为交联剂,制得脱醇型、脱酮肟型和脱醋酸型双组分室温硫化( RTV-2)氟硅密封胶。探讨了硫化类型对氟硅密封胶表干时间、耐热空气老化性能、耐油性能、热失重性能以及动态热机械性能的影响。结果表明:脱酮肟型氟硅密封胶具有良好的综合性能:玻璃化转变温度为-114℃;热质量损失率为10%时的温度达到482.2℃;经200℃×24 h老化后,拉伸强度降低4%,拉断伸长率降低7%。%The dealcoholic , ketonic oxime and acetate RTV-2 fluorosilicone sealants were prepared by self-made hydroxyl-terminated fluorosilicone copolymer as the polymer matrix , ZnO as the filler , dibutyltin di-laurate as the catalyst , ethyl orthosilicate , trimethylbutylketoneoximesilane ( D31) and triacetoxylmethylsilane ( D17 ) as the crosslinking agents , respectively .The effect of the different vulcanization reagents on the tack free time, the thermal aging properties in air , oil resistance performance , thermogravimetric performance and dynamic thermomechanical properties of fluorosilicone sealants was discussed .Results showed that the ketonic oxime fluorosilicone sealant had better physical and thermal properties with a glass transition temperature of-114℃, a temperature of 10%weight loss at 482.2℃, and a decrease of tensile strength and elongation at break of 4%and 7%, respectively after aging for 24 hours at 200 ℃.

  2. 40 CFR 721.2805 - Acrylate ester.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Acrylate ester. 721.2805 Section 721... Acrylate ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an acrylate ester (PMN P-96-824) is subject to reporting under...

  3. Isobornyl acrylate contact allergy: Rare or underdiagnosed?

    NARCIS (Netherlands)

    Christoffers, W.A.; Coenraads, P.J.; Schuttelaar, M.L.A.

    2012-01-01

    Background: Allergic contact dermatitis to isobornyl acrylate has been reported in only two cases in literature. Therefore, isobornyl acrylate is not part of a (meth) acrylates patch test series. At our department an industrial worker presented with therapy-resistant hand eczema and sensitizations f

  4. SYNTHESIS OF SOAP-FREE ACRYLIC HYDROSOLS

    Institute of Scientific and Technical Information of China (English)

    Li Jia; Zong-hui Liu; De-qing Wei

    2002-01-01

    Poly(methyl methacrylate/ethyl acrylate/acrylic acid) hydrosols were prepared by employing soap-freepolymerization, and (acrylic acid/butyl acrylate) oligomer was used as the polymeric surfactant. The effect of reactioncondition on the morphology and particle size of the hydrosols was investigated. The minimum amount of acrylic acid in thehydrosols is 2%. The maximum weight average molecular weight (Mw) of polymer that assures soap-free emulsionconversion into hydrosol is about 1.2 × 105-1.3 × 105. The particle transforming process was investigated, and an obviouschange of particle diameter and morphology was observed.

  5. Study on preparation and properties of waterborne fluoro-siliconated polyurethane dispersion%水性含氟硅聚氨酯水分散体的制备与性能分析

    Institute of Scientific and Technical Information of China (English)

    张英强; 张园园; 潘悦佩; 黄茂松; 吴蓁

    2012-01-01

    以含氟聚醚多元醇、N210、羟基硅油、4,4’-二环己基甲烷二异氰酸酯(HMDI)为主要原料,采用自乳化法合成了水性含氟硅聚氨酯分散体.研究了影响水性含氟硅聚氨酯分散体的粒径及其分布、固含量、乳胶膜的热性能与耐酸碱性能的因素.结果表明,加入氟和硅的水性聚氨酯,其耐化学品性和耐热性能均有所提高.%Waterbome fluoro-siliconated polyurethane dispersion (FSiWPUA) was prepared from fluorine-containing polyether polyol,N210.hydroxyl silicone oil,dicyclohexylmethylmethane-4,4'-diisocyanate (HMDI) as main materials through self-emulsified method. The factors on FSiWPUA, including the particle size and distribution! Solid content,heat resistant and the acid and alkali resistant properties of coatings, were, investigated. The results indicated that the chemical resistant and heat resistant properties of fluoro-siliconated polyurethane were better than none of fluorine and silicone.

  6. 氟硅三嵌段聚合物的合成及其表面性能%Synthesis and Surface Properties of a Fluorosilicone Triblock Copolymer

    Institute of Scientific and Technical Information of China (English)

    成西涛; 李稳宏; 黄方方; 张存社; 王前进; 周魁

    2016-01-01

    以双端羟丙基聚硅氧烷与α-氯代异丁基酰氯反应得到多官能团大分子引发剂Cl-PDMS-Cl,以CuCl为催化剂、N-(2-吡啶亚甲基)-1-丙胺(PMPA)和2,2′-联吡啶(BPY)为催化剂配体,通过原子转移自由基聚合反应(AT-RP)合成了聚甲基丙烯酸六氟丁酯-聚硅氧烷-聚甲基丙烯酸六氟丁酯(PHFBMA-b-PDMS-b-PHFBMA).通过傅里叶变换红外光谱仪(IR)、核磁(NMR)对三嵌段聚合物的结构行了表征.以水/油接触角为主要指标,考察了聚合物中氟硅含量、溶剂及成膜温度对聚合物涂膜表面性能的影响,结果表明:以醋酸仲丁酯为溶剂,结构为HFBMA10-DMS88 HFBMA10的三嵌段聚合物在100℃成膜,涂膜水、油接触角可达135.50°和123.33°,涂膜性能优良.%Fluorosilicone triblock copolymers poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-block-poly (dimethylsiloxane)-block-poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)(PHFBMA-b-PDMS-b-PHFBMA)were synthesized by atom transfer radical polymerization (ATRP)from dichloro terminated polydimethylsiloxane (Cl-PDMS-Cl)and 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFBMA)in CuCl/N-(2-pyridinemthyl)-propylamine (PMPA)and 2,2′-bipyridine (BPY)catalytic effect.The structure and composition of the copolymers were analyzed and identified by infrared spectroscopy (IR),nuclear magnetic resonance (NMR).The effects of the fluorine/silicone content,solvent and film forming temperature on the hydrophobic and oleophobic properties of prepared triblock co-polymers were also investigated.The results showed that the water/oil contact angle of HFBMA10 DMS88 HFBMA10 was about 135.50°/123.33°respectively and other performances of the film were excellent.

  7. Vinyl Acetate/butyl acrylate/acrylate Research of Ternary Soap-free Emulsion Polymerization

    Directory of Open Access Journals (Sweden)

    Xiao Li-guang

    2016-01-01

    Full Text Available Through the vinyl acetate/butyl acrylate/acrylic acrylic emulsion preparation without soap vinegar, with solid content, gel, emulsion stability and film forming properties and tensile strength as the main index to study the effect of raw materials on the properties of emulsion. Through the infrared spectrometer soap-free emulsion for microscopic analysis research. Study of the ternary soap-free vinegar acrylic emulsion with good performance.

  8. 甲基丙烯酸甲酯与氟硅大单体的细乳液共聚研究%A study on miniemulsion copolymerization of methyl methacrylate with fluorosilicone macromonomer

    Institute of Scientific and Technical Information of China (English)

    袁伟; 周蔚; 徐凯; 易玲敏

    2014-01-01

    Fluorosilicone-containing comb-like graft copolymers may be obtained by the radical copolymer-ization of fluorosilicone macromonomer with vinyl monomers. By using sodium dodecyl sulfate(SDS)as the surfactant,hexadecane(HD)as the co-stabilizer,and 2,2'-azobis(isobutyronitrile)(AIBN)as the initiator,this paper studies the miniemulsion copolymerization of methyl methacrylate(MMA)with vinyl-terminated poly[methyl(3,3,3- trifluoropropyl)siloxane](V-PMTFPS). It investigates the effects of pol-ymerization temperature,amount of surfactant,co-stabilizer and the initiator on the conversion of MMA. The composition and thermal properties of the obtained copolymers are also characterized by proton-nucle-ar magnetic resonance( 1 H-NMR)analysis and differential scanning calorimetry(DSC). The results show that MMA can be copolymerized well with V-PMTFPS,leading to high yields of graft copolymers. This study may be used as a basis for the preparation of fluorosilicone-containing copolymer materials with macromonomer technique.%通过氟硅大单体与小分子乙烯基单体的自由基共聚,有望获得含氟硅的梳形接枝共聚物。以十二烷基硫酸钠(SDS)为乳化剂,正十六烷(HD)为助乳化剂,偶氮二异丁腈(AIBN)为引发剂,进行了甲基丙烯酸甲酯(MMA)与氟硅大分子单体(V - PMTFPS)的细乳液共聚反应研究。详细考察了共聚反应温度、引发剂浓度、乳化剂与助乳化剂用量等因素对 MMA 转化率的影响,并利用核磁共振氢谱(1 H - NMR)、示差扫描量热分析(DSC)等方法对共聚反应产物进行了表征。结果表明,MMA 可与 V - PMTFPS 很好地共聚,且转化率较高,获得了有机硅接枝型共聚物,可为利用大单体技术制备含氟硅共聚物材料提供依据。

  9. Study of water repellent finishing on cotton with fluorosilicon soap-free water repellent agent%氟硅无皂拒水剂在棉织物拒水整理中的应用

    Institute of Scientific and Technical Information of China (English)

    李智斌; 樊增禄; 毛宁涛; 李庆; 蔡信彬

    2016-01-01

    为提高棉织物的拒水性能,采用自制的氟硅无皂拒水剂对棉织物进行整理.通过单因素试验优化拒水整理的工艺条件,测试拒水整理棉织物的拒水性及透气性等,并与市售拒水剂进行对比.结果表明,在氟硅无皂拒水剂60g/L ,二浸二轧,100℃下预烘4min ,170℃下焙烘3min ,整理后棉织物对水的接触角达到138.6°,静水压为2.83kPa ,表现出良好的拒水效果.%In order to improve the properties of water repellency for cotton fabrics ,selfmade flu-orosilicon soap-free water repellent agent is used to finish cotton fabric .The process conditions of water repellent finishing was optimized by single factor test ,the water repellency and air permeability of the finished cotton fabric were tested ,and compared with the market-sold water repellent agents .The result shows that using 60g/L fluorosilicon soap-free water repellent a-gent ,two-padding two-rolling ,drying at 100 ℃ for 4min ,baking at 170 ℃ for 3min ,the con-tact angle and hydrostatic pressure reached 138.6° and 2.83kPa ,the cotton fabric treated ex-hibited good water-repellent properties .

  10. Research on Emulsion Formulation of Two Kinds of Fluorosilicone Oil%两种氟硅油的乳液配方研究

    Institute of Scientific and Technical Information of China (English)

    蔡露; 李战雄; 袁京; 许燕; 单良

    2012-01-01

    fluoromethylsilicone oil were that with Span 20 and SDS as emulsion, 1. 5 g/L lauryl alcohol and 10 of HLB value, the stable transparent emulsion was obtained with solid mass fraction of 10 g/L. The octafluoropentyoxapropyl aminosilicone oil with AEO -9 and SDS as e-mulsifiers whose mass fraction was 12% , with the increase of fluorine, the surface tension of octafluoroamy-loxypropyl amino silicone oil decreased, and the balance value of corresponding emulsifier decreases accordingly. The mass fraction of fluorine was 25% , 30% , 35% , respectively, when the mass fraction of amino was 1% , HLB value of the fluorosilicone oils was 23, 18 and 14, respectively.

  11. Preparation and properties of phosphate fluorosilicone surfactants%磷酸酯型氟硅表面活性剂的制备及性能研究

    Institute of Scientific and Technical Information of China (English)

    黄良仙; 李婷; 李顺琴; 杜倩; 张乐

    2016-01-01

    A novel phosphate fluorosilicone surfactants (PFSS) was synthesized through hydrosilylation and esterification reaction using the hydrogen- containing fluorine polysiloxane (FPHMS), polyethylene glycol monoal yl ether (FAE- 10) and phosphoric acid as the raw materials. The chemical structure of PFSS was char⁃acterized by IR. The properties of PFSS, such as critical micel e concentration (cmc), critical surface tension (γcmc), resistance to acid, alkali and salt, stability in hard water, as wel as the application performance of the fab⁃ric treated by PFSS solution were tested. The results showed that the cmc of PFSS solution was 0.2 g/L, γcmc of PFSS solution was 28.4 mN/m. The PFSS solution had good chemical stability in acid, alkali and salt solu⁃tion. The stability of PFSS in hard water was grade 5. Compared with the blank sample, the softness of the fabric treated by PFSS solution was enhanced significantly, and the whiteness and wettability of finished fabric was almost unchanged. With PFSS amount increasing, the softness of fabric treated by PFSS solution in⁃creased first and then declined, however the whiteness and wettability of treated fabrics changed a little. Ac⁃cording to AATCC 118, the oil- repel ency rating result of treated fabric qualified for colza oil, and the soil re⁃lease property reached level 5 for coke, tea water and ink.%以含氢氟硅油(FPHMS)、聚乙二醇单烯丙基醚(FAE-10)和磷酸等为主要原料,经硅氢加成反应、酯化反应制得一种磷酸酯型氟硅表面活性剂(PFSS)。用红外光谱(IR)对其结构进行了表征,并对PFSS的临界胶束浓度(cmc)、临界表面张力(γcmc)、耐酸碱盐性、在硬水中的稳定性以及对整理织物的应用性能等进行了测试。结果表明:PFSS水溶液的γcmc为28.4 mN/m,cmc为0.2 g/L。PFSS溶液具有很好的耐酸碱盐稳定性,在硬水中的稳定性为5级。和空白布样相比,经PFSS水乳液整理

  12. Preparation of Hydroxyl-terminated Liquid Fluorosilicone Rubber%羟基封端液体共聚氟硅橡胶的制备

    Institute of Scientific and Technical Information of China (English)

    许少华; 吕亚非; 齐士成

    2011-01-01

    采用氢氧化钾催化八甲基环四硅氧烷与三氟丙基甲基环三硅氧烷的阴离子开环共聚合反应,制备了液体共聚氟硅橡胶.讨论了加料方式(一步法和两步法)、滴加单体时间和共聚合时间对液体共聚氟硅橡胶摩尔质量和特性黏度的影响,从优化聚合条件和后处理两个途径确保液体共聚氟硅橡胶形成线性链结构.结果表明:由于三氟丙基甲基环三硅氧烷和八甲基环四硅氧烷的单体特点和共聚合机理,一步加料法难以有效控制小分子环体副产物的生成;采用两步加料法不仅可以有效控制小分子环体副产物的生成,而且可以提高液体共聚氟硅橡胶的产率;两步加料法可控制滴加时间为30 min,总聚合反应时间为70 min.采用溶剂多次萃取方法,可以有效除去小分子环体副产物.%The cationic ring-opening copolymerization of 1,3,5 - ( trifluoropropylmethyl) cyclosiloxane ( D3F) and octamethylcyclotetrasiloxane ( D4 ) was used to prepare the hydroxyl-terminated liquid fluorosilicone rubber. The reaction conditions including the feeding modes of adding monomers ( one-step and two-step methods) , monomer feeding time and polymerization time were optimized. By using the optimization of polymerization and solvent extraction post-treatment method, the side products of small cyclo-molecules could be removed. Results showed that owing to the characteristics and copolymerization mechanism of the 1,3 ,5 - ( trifluoropropylmethyl) cyclosiloxane and octamethylcyclotetrasiloxane, one-step method could not prevent the production of the annulus small molecule by-product; while two-step method could not only control the production of the annulus small molecule by-product , but also improve the yield of the liquid copolymer flurosilicone rubber. The adding time was 30 min and total polymer reaction time was 70 min. The annulus small molecule by-product might be effectively removed by multiple extract the solvents.

  13. 21 CFR 573.120 - Acrylamide-acrylic acid resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Acrylamide-acrylic acid resin. 573.120 Section 573... Food Additive Listing § 573.120 Acrylamide-acrylic acid resin. Acrylamide-acrylic acid resin... acrylamide with partial hydrolysis, or by copolymerization of acrylamide and acrylic acid with the greater...

  14. Monolithic F-16 Uniform Thickness Stretched Acrylic Canopy Transparency Program

    Science.gov (United States)

    1984-01-01

    Thermoforming Finite Strain Analysis Finite Element Modeling Mooney Formulation Tensile Testing Acrylic Material Properties F-16 Transparency Thinning Uniform...OF ACRYLIC TENSILE SPECIMEN ...... 8 MARC ANALYSIS OF ACRYLIC HEMISPHERE ............ 12 IV ACRYLIC MATERIAL PROPERTIES AT THERMOFORMING TEMPERATURES...properties (necessary for finite element stress analysis work) were generated at temperatures in the range of thermoforming . A finite element code

  15. Poly(meth)acrylate-based coatings.

    Science.gov (United States)

    Nollenberger, Kathrin; Albers, Jessica

    2013-12-05

    Poly(meth)acrylate coatings for pharmaceutical applications were introduced in 1955 with the launch of EUDRAGIT(®) L and EUDRAGIT(®) S, two types of anionic polymers. Since then, by introducing various monomers into their polymer chains and thus altering their properties, diverse forms with specific characteristics have become available. Today, poly(meth)acrylates function in different parts of the gastrointestinal tract and/or release the drug in a time-controlled manner. This article reviews the properties of various poly(meth)acrylates and discusses formulation issues as well as application possibilities.

  16. Occupational respiratory disease caused by acrylates.

    Science.gov (United States)

    Savonius, B; Keskinen, H; Tuppurainen, M; Kanerva, L

    1993-05-01

    Acrylates are compounds used in a variety of industrial fields and their use is increasing. They have many features which make them superior to formerly used chemicals, regarding both their industrial use and their possible health effects. Contact sensitization is, however, one of their well known adverse health effects but they may also cause respiratory symptoms. We report on 18 cases of respiratory disease, mainly asthma, caused by different acrylates, 10 cases caused by cyanoacrylates, four by methacrylates and two cases by other acrylates.

  17. Gel time of calcium acrylate grouting material

    Institute of Scientific and Technical Information of China (English)

    韩同春

    2004-01-01

    Calcium acrylate is a polymerized grout, and can polymerize in an aqueous solution. The polymerizationreaction utilizes ammonium persulfate as a catalyst and sodium thiosulfate as the activator. Based on the theory of reactionkinetics, this study on the relation between gel time and concentration of activator and catalyst showed that gel time ofcalcium acrylate is inversely proportional to activator and catalyst concentration. A formula of gel time is proposed, and anexample is provided to verify the proposed formula.

  18. Gel time of calcium acrylate grouting material

    Institute of Scientific and Technical Information of China (English)

    韩同春

    2004-01-01

    Calcium acrylate is a polymerized grout, and can polymerize in an aqueous solution. The polymerization reaction utilizes ammonium persulfate as a catalyst and sodium thiosulfate as the activator. Based on the theory of reaction kinetics, this study on the relation between gel time and concentration of activator and catalyst showed that gel time of calcium acrylate is inversely proportional to activator and catalyst concentration. A formula of gel time is proposed, and an example is provided to verify the proposed formula.

  19. Rapid Output Growth of Special Acrylic Esters

    Institute of Scientific and Technical Information of China (English)

    Wang Lianzhi

    2007-01-01

    @@ Acrylic esters are usually classified into general-purpose varieties and special varieties. The production and application of general-purpose varieties is already quite matured in the world and their output growth tends to be flat. Owing to the development of coatings, electronics, automobiles,textiles, printing and construction sectors, especially the application of radiation curing technology in various sectors, special acrylic esters have developed rapidly.

  20. A comparison between spectacles and RGP CL in correcting aphakic eyes%外伤或手术所致无晶状体眼透气性硬性角膜接触镜与框架眼镜矫正的比较

    Institute of Scientific and Technical Information of China (English)

    王雪; 马薇; 杨必; 刘陇黔

    2012-01-01

    Objective To evaluate the differences of the degree and corrected visual acuity between spectacles and contact lens in correcting aphakic eyes.Method 51 subjects were fitted with both RGP CL lenses and spectacles.They were first examined with corneal topography and refractometry,then were fitted with RCP CL trial lenses and lastly fitted with RGP CL lenses.Take 12 mm as mirror eye distance to calculate patients' needed diopters according to formula,then compared with the diopters of RGP CL lens.Results The differences of the degree in the two groups are not statistically significant.RGP CL lens provide a significant improvement in visual acuity.Conclusion RGP CL is safe and effective in correcting aphakics.%目的 探讨用框架眼镜和透气性硬性角膜接触镜( RGP CL)分别对无晶状体眼进行矫正后,两者在矫正视力和处方度数有无差异.方法 51例(53眼)无晶状体眼分别接受框架眼镜和RGP CL矫正,记录其矫正视力和处方度数,将框架眼镜处方度数使用12 mm镜眼距进行换算后,再对两组数据进行统计学分析.结果 发现RGP CL矫正视力明显优于框架眼镜矫正视力,差异有统计学意义;框架眼镜和RGP CL矫正无晶状体眼处方度数,差异无统计学意义.结论 用框架眼镜矫正效果可大致预估RGP CL矫正效果,但RGP CL矫正在视力舒适度及双眼视的获得较框架眼镜有不可取代的优势,并且对由于角膜不规则散光等造成的屈光矫正视力不佳,能取得更好的效果.在对无晶状体眼进行光学矫正时,应首选RGP CL.

  1. Tribological Properties of Fluorosilicone Containing Oils as Lubricant Additives%含氟硅油作为润滑油添加剂的摩擦学性能研究

    Institute of Scientific and Technical Information of China (English)

    冯欣

    2011-01-01

    用SRV摩擦磨损试验机评价了2种含氟硅油在聚α烯烃基础油中作为添加剂的摩擦学性能,用扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)观察并分析了磨斑表面形貌和主要元素的化学状态,探讨了含氟硅油的摩擦化学机制.结果表明:含氟硅油具有优良的减摩和抗磨性能;含氟硅油在摩擦作用下发生分解,在摩擦副表面生成的含氟的摩擦化学产物是提高摩擦副抗磨减摩性能的关键因素.%The friction and wear of two kinds of fluorosilicone oils as lubricant additives were evaluated on an Optimo] SRV reciprocating friction and wear tester by using AISI 52100 steel disc against AISI 52100 steel ball at applied loads of 50 and 200 N, a sliding speed of 0. 20 rn/s. The wear scar sizes of AISI 52100 steel discs and AISI 52100 steel balls were measured using an optical microscope. The morphologies of the worn surfaces of the AISI 52100 steel discs were examined using a scanning electron microscope (SEM). In addition, the elemental compositions and chemical states of several typical elements on the worn surfaces of the steel discs were examined by means of X - ray photoelectron spectroscopy ( XPS). Results indicated that the evaluated tribo - pair under lubrication of PAO base oil using fluorosilicone containing oils as lubricant additives exhibited higher wear - resistance and lower stable friction coefficients than that in pure PAO base oil. This is partly attributed to tribophysical and tribochemical reaction between the lubricant and the sliding surfaces.

  2. Photochemistry of acrylates at 222 nm

    Science.gov (United States)

    Knolle, Wolfgang; Naumov, Sergej; Madani, Mohamed; von Sonntag, Clemens

    2005-07-01

    Excimer lamps as monochromatic UV sources with an intense short-wavelength emission (especially KrCl∗, 222 nm) allow a photoinitiator-free initiation of the acrylate polymerisation. Laser photolysis (KrCl∗ excimer laser, pulse width 20 ns, up to 5 mJ per pulse) gives rise to similar transient spectra (λmax ≈ 280 nm) for all acrylates studied. As the rather unspecific spectra do not allow conclusions as to the main reaction channel, a product study has been performed by GC-MS following steady-state photolysis of acrylate solutions in acetonitrile, methanol and n-hexane. Somewhat unexpected, α-cleavage seems to be a main reaction channel, and quantum chemical calculations show that such a reaction can occur from either the excited singlet state or the unrelaxed triplet state, but not from the relaxed triplet state that is observed spectroscopically. A reaction scheme accounting for the observed products is presented.

  3. Concepts for stereoselective acrylate insertion

    KAUST Repository

    Neuwald, Boris

    2013-01-23

    Various phosphinesulfonato ligands and the corresponding palladium complexes [{((PaO)PdMeCl)-μ-M}n] ([{( X1-Cl)-μ-M}n], (PaO) = κ2- P,O-Ar2PC6H4SO2O) with symmetric (Ar = 2-MeOC6H4, 2-CF3C6H4, 2,6-(MeO)2C6H3, 2,6-(iPrO)2C 6H3, 2-(2′,6′-(MeO)2C 6H3)C6H4) and asymmetric substituted phosphorus atoms (Ar1 = 2,6-(MeO)2C6H 3, Ar2 = 2′-(2,6-(MeO)2C 6H3)C6H4; Ar1 = 2,6-(MeO)2C6H3, Ar2 = 2-cHexOC 6H4) were synthesized. Analyses of molecular motions and dynamics by variable temperature NMR studies and line shape analysis were performed for the free ligands and the complexes. The highest barriers of ΔGa = 44-64 kJ/mol were assigned to an aryl rotation process, and the flexibility of the ligand framework was found to be a key obstacle to a more effective stereocontrol. An increase of steric bulk at the aryl substituents raises the motional barriers but diminishes insertion rates and regioselectivity. The stereoselectivity of the first and the second methyl acrylate (MA) insertion into the Pd-Me bond of in situ generated complexes X1 was investigated by NMR and DFT methods. The substitution pattern of the ligand clearly affects the first MA insertion, resulting in a stereoselectivity of up to 6:1 for complexes with an asymmetric substituted phosphorus. In the consecutive insertion, the stereoselectivity is diminished in all cases. DFT analysis of the corresponding insertion transition states revealed that a selectivity for the first insertion with asymmetric (P aO) complexes is diminished in the consecutive insertions due to uncooperatively working enantiomorphic and chain end stereocontrol. From these observations, further concepts are developed. © 2012 American Chemical Society.

  4. 40 CFR 721.329 - Halogenated benzyl ester acrylate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated benzyl ester acrylate... Specific Chemical Substances § 721.329 Halogenated benzyl ester acrylate (generic). (a) Chemical substance... halogenated benzyl ester acrylate (PMN P-90-1527) is subject to reporting under this section for...

  5. 40 CFR 721.10180 - Trifunctional acrylic ester (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Trifunctional acrylic ester (generic... Specific Chemical Substances § 721.10180 Trifunctional acrylic ester (generic). (a) Chemical substance and... acrylic ester (PMN P-04-692) is subject to reporting under this section for the significant new...

  6. 21 CFR 175.210 - Acrylate ester copolymer coating.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Acrylate ester copolymer coating. 175.210 Section... COATINGS Substances for Use as Components of Coatings § 175.210 Acrylate ester copolymer coating. Acrylate ester copolymer coating may safely be used as a food-contact surface of articles intended for...

  7. SYNTHESIS OF BIOCOMPATIBLE ACRYLIC POLYMERS HAVING ASPIRIN-MOIETIES

    Institute of Scientific and Technical Information of China (English)

    LI Fumian; GU Zhongwei; FENG Xinde(S. T. Voong)

    1983-01-01

    Several new monomers, β-(acetylsalicylyloxy)ethyl methacrylate, β-(acetylsalicylyloxy)propyl methacrylate, β-(acetylsalicylyloxy)ethyl acrylate, β-hydroxy-γ-(acetylsalicylyloxy)propyl methacrylate, β-hydroxy-γ-(acetylsalicylyloxy)propyl acrylate have been synthesized from aspirin with corresponding hydroxyalkyl or glycidyl acrylates, and then polymerized by free radical initiator.

  8. 21 CFR 176.110 - Acrylamide-acrylic acid resins.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Acrylamide-acrylic acid resins. 176.110 Section 176... Substances for Use Only as Components of Paper and Paperboard § 176.110 Acrylamide-acrylic acid resins. Acrylamide-acrylic acid resins may be safely used as components of articles intended for use in producing...

  9. 40 CFR 721.324 - Alkoxylated acrylate polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxylated acrylate polymer (generic... Substances § 721.324 Alkoxylated acrylate polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkoxylated acrylate polymer...

  10. Amylase catalyzed synthesis of glycosyl acrylates and their polymerization

    NARCIS (Netherlands)

    Kloosterman, Wouter M.J.; Jovanovic, Danijela; Brouwer, Sander; Loos, Katja

    2014-01-01

    The enzymatic synthesis of novel (di)saccharide acrylates from starch and 2-hydroxyethyl acrylate, 2-hydroxyethyl methacrylate and 4-hydroxybutyl acrylate (2-HEA, 2-HEMA and 4-HBA) catalyzed by various commercially available amylase preparations is demonstrated. Both liquefaction and saccharificatio

  11. Investigation of Acrylic Acid at High Pressure using Neutron Diffraction

    DEFF Research Database (Denmark)

    Johnston, Blair F.; Marshall, William G.; Parsons, Simon

    2014-01-01

    This article details the exploration of perdeuterated acrylic acid at high pressure using neutron diffraction. The structural changes that occur in acrylic acid-d4 are followed via diffraction and rationalised using the Pixel method. Acrylic acid undergoes a reconstructive phase transition to a n...

  12. 角膜屈光手术后继发性圆锥角膜的RGP矫正疗效观察%RGP Correct Corneal Ectasia after Corneal Refractive Surgery

    Institute of Scientific and Technical Information of China (English)

    赵江浩; 吴年浪; 张惠成

    2012-01-01

    目的 评价硬性透气性角膜接触镜(rigid permeability contact lenses,RGP)矫正角膜屈光手术后圆锥角膜的疗效.方法 选择笔者医院收治的11例(21眼)角膜屈光手术后圆锥角膜患者配戴RGP,观察1年后角膜前后表明曲率,RGP和普通软性角膜接触镜的角膜地形图改变.结果 配戴RGP1年后角膜前表面最平平均曲率值和后表面曲率值没有明显变化.RGP矫正1年后角膜前表面的最陡平均曲率明显下降,角膜地形图SRI,SAI,散光减少,PVA提高.对照组佩戴普通软性角膜接触镜1年后角膜地形图无明显改善.结论 经1年的随访观察,RGP对角膜屈光手术后的圆锥角膜能明显改善患者的角膜前表面最陡平均曲率,角膜后表面和角膜前表面最平平均曲率保持稳定.是目前矫正角膜屈光手术后圆锥角膜的有效方法.%Objective To evaluate the effect of rigid permeability contact lenses (RGP) for correcting corneal ectasia after comeal refractive surgery. Methods 21 eyes from 11 patients identified as developing corneal ectasia after comeal refractive surgery were used in this study. The change of corneal curvature front surface and after the surface was observed. Also the change of corneal topography of after wearing RCP and soft contact lens after 1 year was observed. Results Front surface MIX corneal curvature value and after surface corneal curvature value did not change significantly. Front surface MAX cornea] curvature was decreased significantly after wearing RGP 1 year. SRI, SAI and stigmatism were obviously decreased, and PVA was improved after wearing RGP 1 year. At the same time corneal topography did not change significantly after wearing soft contact lens 1 year. Conclusion By 1 years of follow -up, front surface MAX corneal curvature ,stigmatism are obviously decreased after comeal refractive surgery. The patient's vision is obviously improved. Front surface MIX corneal curvature value and after surface comeal

  13. Acrylic Tanks for Stunning Chemical Demonstrations

    Science.gov (United States)

    Mirholm, Alexander; Ellervik, Ulf

    2009-01-01

    We describe the use of acrylic tanks (400 x 450 x 27 mm) for visualization of chemical demonstrations in aqueous solutions. Examples of well-suited demonstrations are oscillating reactions, pH indicators, photochemical reduction of Lauth's violet, and chemoluminiscent reactions. (Contains 1 figure.)

  14. ACRYLATE-AMIDE FOAM CARDIOVASCULAR PROSTHESES.

    Science.gov (United States)

    thoracic and abdominal aorta. The use of a composite construction utilizing acrylate-amide foam is being evaluated in prostheses for mitral valve ...bleeding. The success of the initial experimental work has led to a clinical trial in which 99 replacement , bypass, or patch-angioplasty procedures... replacement , superior vena cava patch venoplasty, and esophageal replacement . (Author)

  15. Probe Tack of Model Acrylic Adhesives

    Science.gov (United States)

    Lakrout, Hamed; Creton, Costantino; Ahn, Dongchan; Shull, Kenneth R.

    1998-03-01

    In a probe tack test, a flat punch comes in contact with a thin layer of elastomer deposited on a substrate. The punch is then removed from the substrate at a constant crosshead velocity. In these conditions, the adhesive layer is highly constrained and extensive cavitation will occur when a negative hydrostatic pressure is applied. Commercial latexes of Poly2-EthylHexyl Acrylate (PEHA) and homemade Polyn-ButylAcrylate have been tested and characterized by dynamic mechanical measurements. Tests have been performed using several temperatures and debonding rates. Stress vs. strain curves have been related to debonding mechanisms through video observation. For both of these acrylic adhesives, temperature and debonding rate have opposite effects on adhesion energy and maximum stress of debonding, behavior which is typical for a viscoelastic system. In case of the PEHA, the addition of 2.5% of acrylic acid did not affect the rheological properties. However the type of the fracture changed from cohesive to adhesive. Moreover the growth of the cavities changed from viscous fingering of few cavities to circular growth of numerous small cavities.

  16. Large Acrylic Spherical Windows In Hyperbaric Underwater Photography

    Science.gov (United States)

    Lones, Joe J.; Stachiw, Jerry D.

    1983-10-01

    Both acrylic plastic and glass are common materials for hyperbaric optical windows. Although glass continues to be used occasionally for small windows, virtually all large viewports are made of acrylic. It is easy to uderstand the wide use of acrylic when comparing design properties of this plastic with those of glass, and glass windows are relatively more difficult to fabricate and use. in addition there are published guides for the design and fabrication of acrylic windows to be used in the hyperbaric environment of hydrospace. Although these procedures for fabricating the acrylic windows are somewhat involved, the results are extremely reliable. Acrylic viewports are now fabricated to very large sizes for manned observation or optical quality instrumen tation as illustrated by the numerous acrylic submersible vehicle hulls for hu, an occupancy currently in operation and a 3600 large optical window recently developed for the Walt Disney Circle Vision under-water camera housing.

  17. METHACRYLATE AND ACRYLATE ALLERGY IN DENTAL STUDENTS.

    Directory of Open Access Journals (Sweden)

    Maya Lyapina

    2013-09-01

    Full Text Available A multitude of acrylic monomers is used in dentistry, and when dental personnel, patients or students of dental medicine become sensitized, it is of great importance to identify the dental ;acrylic preparations to which the sensitized individual can be exposed. Numerous studies confirm high incidence of sensitization to (meth acrylates in dentatal professionals, as well as in patients undergoing dental treatment and exposed to resin-based materials. Quite a few studies are available aiming to evaluate the incidence of sensitization in students of dental medicineThe purpose of the study is to evaluate the incidence of contact sensitization to some (meth acrylates in students of dental medicine at the time of their education, in dental professionals (dentists, nurses and attendants and in patients, the manifestation of co-reactivity.A total of 139 participants were included in the study, divided into four groups: occupationally exposed to (methacrylates and acrylic monomers dental professionals, 3-4 year-of-education students of dental medicine, 6th year–of-education students of dental medicine and patients with suspected or established sensitization to acrylates, without occupational exposure. All of them were patch-tested with methyl methacrylate (MMA, triethyleneglycol dimethacrylate (TREGDMA, ethyleneglycol dimethacrylate (EGDMA, 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy phenyl]propane (bis-GMA, 2-hydroxyethyl methacrylate (2-HEMA, and tetrahidrofurfuril metacrylate. The overall sensitization rates to methacrylates in the studied population are comparative high – from 25.9% for MMA to 31.7% for TREGDMA. Significantly higher incidence of sensitization in the group of 3-4 course students compared to the one in the group of dental professionals for MMA and TREGDMA was observed. Highest was the incidence of sensitization to ethyleneglycol dimethacrylate, BIS-GMA, 2-HEMA and tetrahydrofurfuryl methacrylate in the group of patients, with

  18. Clinical study of rigid gas-permeable lenses to correct astigmatism for keratoconus%硬性透气性隐形眼镜(RGP)矫正圆锥角膜的疗效分析

    Institute of Scientific and Technical Information of China (English)

    王丽强; 刘莉; 黄一飞

    2006-01-01

    AIM: To evaluate visual outcome and wearing times in eyes fitted with a rigid gas permeable contact lenses and to assess the role of these lenses in therapeutic contact lens practice.METHODS: Patients fitted with RGP from May 2004 to December 2005 were retrospectively reviewed. Ocular diagnosis,flat and steep curvatures by corneal topography. The data included initial base curve, power, and the number of changes made in parameters during the follow-up. The outcome data included visual acuity and the duration of follow-up and lens wear. Complications and complaints were also noted.RESULTS: Forty-Three eyes of 25 patients had keratoconus were reviewed. The mean age of patients was 19.88 ±3.11years. 26 (60.5%)eyes achieved 20/20 visual acuity;15(34.9%) eyes achieved 20/25 to 20/40; and 1 (2.3%) eyes achieved 20/50 to 20/70. 37 (86.0%) eyes achieved visual improvement. No infection or neovascularization was noted; a corneal abrasion occurred in one eye.CONCLUSION: RGP may be a better alternative in selected patients with keratoconus rather than penetrating keratoplasty.%目的:评价硬性透气性隐形眼镜(RGP)矫正圆锥角膜屈光异常的疗效.方法:选择我院2004-05/2005-12收治的25例(43眼)圆锥角膜患者配戴RGP,观察视力、角膜曲率、配适状况、舒适度及并发症.结果:RGP矫正视力均好于或等于框架球柱面联合镜.其中优于框架球柱面联合镜片者37眼(86.0%),二者视力相等者6眼(14.0%),矫正视力低于框架球柱面联合镜者0眼,经统计学处理,两者有显著性差异(P<0.01).配戴RGP 6mo时角膜曲率值没有明显变化.本组病例配适良好,合并症少而轻.结论:经6mo随访观察,RGP对圆锥角膜的视力矫正明显优于框架眼镜,是目前矫正圆锥角膜的非手术治疗的有效方法.

  19. Boosting with Subtype C CN54rgp140 Protein Adjuvanted with Glucopyranosyl Lipid Adjuvant after Priming with HIV-DNA and HIV-MVA Is Safe and Enhances Immune Responses: A Phase I Trial.

    Directory of Open Access Journals (Sweden)

    Agricola Joachim

    Full Text Available A vaccine against HIV is widely considered the most effective and sustainable way of reducing new infections. We evaluated the safety and impact of boosting with subtype C CN54rgp140 envelope protein adjuvanted in glucopyranosyl lipid adjuvant (GLA-AF in Tanzanian volunteers previously given three immunizations with HIV-DNA followed by two immunizations with recombinant modified vaccinia virus Ankara (HIV-MVA.Forty volunteers (35 vaccinees and five placebo recipients were given two CN54rgp140/GLA-AF immunizations 30-71 weeks after the last HIV-MVA vaccination. These immunizations were delivered intramuscularly four weeks apart.The vaccine was safe and well tolerated except for one episode of asymptomatic hypoglycaemia that was classified as severe adverse event. Two weeks after the second HIV-MVA vaccination 34 (97% of the 35 previously vaccinated developed Env-specific binding antibodies, and 79% and 84% displayed IFN-γ ELISpot responses to Gag and Env, respectively. Binding antibodies to subtype C Env (included in HIV-DNA and protein boost, subtype B Env (included only in HIV-DNA and CRF01_AE Env (included only in HIV-MVA were significantly boosted by the CN54rgp140/GLA-AF immunizations. Functional antibodies detected using an infectious molecular clone virus/peripheral blood mononuclear cell neutralization assay, a pseudovirus/TZM-bl neutralization assay or by assays for antibody-dependent cellular cytotoxicity (ADCC were not significantly boosted. In contrast, T-cell proliferative responses to subtype B MN antigen and IFN-γ ELISpot responses to Env peptides were significantly enhanced. Four volunteers not primed with HIV-DNA and HIV-MVA before the CN54rgp140/GLA-AF immunizations mounted an antibody response, while cell-mediated responses were rare. After the two Env subtype C protein immunizations, a trend towards higher median subtype C Env binding antibody titers was found in vaccinees who had received HIV-DNA and HIV-MVA prior to the

  20. Site-specific O-Glycosylation on the MUC2 Mucin Protein Inhibits Cleavage by the Porphyromonas gingivalis Secreted Cysteine Protease (RgpB)

    DEFF Research Database (Denmark)

    van der Post, Sjoerd; Subramani, Durai B; Bäckström, Malin

    2013-01-01

    The colonic epithelial surface is protected by an inner mucus layer that the commensal microflora cannot penetrate. We previously demonstrated that Entamoeba histolytica secretes a protease capable of dissolving this layer that is required for parasite penetration. Here, we asked whether there ar......The colonic epithelial surface is protected by an inner mucus layer that the commensal microflora cannot penetrate. We previously demonstrated that Entamoeba histolytica secretes a protease capable of dissolving this layer that is required for parasite penetration. Here, we asked whether...... there are bacteria that can secrete similar proteases. We screened bacterial culture supernatants for such activity using recombinant fragments of the MUC2 mucin, the major structural component, and the only gel-forming mucin in the colonic mucus. MUC2 has two central heavily O-glycosylated mucin domains...... was isolated and identified as Arg-gingipain B (RgpB). Two cleavage sites were localized to IR↓TT and NR↓QA. IR↓TT cleavage will disrupt the MUC2 polymers. Because this site has two potential O-glycosylation sites, we tested whether recombinant GalNAc-transferases (GalNAc-Ts) could glycosylate a synthetic...

  1. Pulse radiolysis of aqueous solutions of ethyl acrylate and hydroxy ethyl acrylate

    Science.gov (United States)

    Safrany, A.; Biro, A.; Wojnarovits, L.

    1993-10-01

    Ethyl- and hydroxy ethyl acrylate show high reactivities with hydrated electron and hydroxyl radical intermediates of water radiolysis. The electron adduct reversibly protonate with pK values of 5.7 and 7.3. The adducts may take part in irreversible protonation at the β carbon atom forming α-carboxyl alkyl radicals. Same type of radical forms in reaction of acrylates with OH: at low concentration the adduct mainly disappear in self termination reactions. Above 5 mmol dm -1 the signals showed the startup of oligomerization.

  2. Preparation and application of comb-like fluorosilicon copolymer/nano silica hybrid%纳米SiO2杂化梳状氟硅共聚物的合成与性能研究

    Institute of Scientific and Technical Information of China (English)

    郝丽芬; 许伟; 安秋凤

    2015-01-01

    Comb- like perfluoroalkyl ester/trifluoropropyl/ethoxy silane containing polysiloxanes (FPFAS) in-termediate was prepared through hydrosilylation and ring- opening reaction, which was reacted with silica sols via in situ condensation to produce comb- like fluorosilicon copolymer/nano silica hybrid (FPFAS- SiO2). Super-hydrophobic cotton fabric with good soft handle and air permeability was fabricated via simple dip- coating method. IR, XPS, FESEM and contact angle tester were utilized to characterize its structure, morphology and application properties. The results indicated that the product had the due structure. Superhydrophobicity of the treated fabric was influenced by the particle diameter of nano silica. While mass concentration of the FP-FAS- SiO2 in ethyl acetate solution was 0.5%, water contact angle and rol- off angle on the treated fabric sur-face were 163.5° and 7°, respectively. The treated cotton fabric possessed favorable air permeability and soft-ness. A micro/nano multiscale composite film on the fiber surface could be clearly observed by FESEM.%用硅氢化加成和开环反应先制得梳状结构的全氟酯基/三氟丙基/硅乙氧基改性聚硅氧烷(FPFAS)中间体.然后利用硅乙氧基与硅溶胶间的原位缩合反应,制得了纳米SiO2梳状氟硅共聚物(FPFAS-SiO2).并用一步浸渍法处理棉织物构筑了兼具柔软、良好透气性的超疏水织物.用IR、XPS、FESEM、接触角测量仪等对产物结构、膜形貌及应用性能进行研究.结果表明,产物具有预期结构.纳米SiO2粒径影响织物的超疏水性能,当FPFAS-SiO2溶液用量为0.5%,整理后织物表面的水静态接触角和滚动角分别为163.5°和7°,具有良好的透气性和柔软性.FESEM可明显观察到纤维表面存在一层微/纳多尺度复合膜.

  3. Comparison of Candida Albicans Adherence to Conventional Acrylic Denture Base Materials and Injection Molding Acrylic Materials

    Directory of Open Access Journals (Sweden)

    Masoomeh Aslanimehr

    2017-03-01

    Full Text Available Statement of the Problem: Candida species are believed to play an important role in initiation and progression of denture stomatitis. The type of the denture material also influences the adhesion of candida and development of stomatitis. Purpose: The aim of this study was comparing the adherence of candida albicans to the conventional and injection molding acrylic denture base materials. Materials and Method: Twenty injection molding and 20 conventional pressure pack acrylic discs (10×10×2 mm were prepared according to their manufacturer’s instructions. Immediately before the study, samples were placed in sterile water for 3 days to remove residual monomers. The samples were then sterilized using an ultraviolet light unit for 10 minutes. 1×108 Cfu/ml suspension of candida albicans ATCC-10231 was prepared from 48 h cultured organism on sabouraud dextrose agar plates incubated at 37oC. 100 μL of this suspension was placed on the surface of each disk. After being incubated at 37oC for 1 hour, the samples were washed with normal saline to remove non-adherent cells. Attached cells were counted using the colony count method after shaking at 3000 rmp for 20 seconds. Finally, each group was tested for 108 times and the data were statistically analyzed by t-test. Results: Quantitative analysis revealed that differences in colony count average of candida albicans adherence to conventional acrylic materials (8.3×103 comparing to injection molding acrylic resins (6×103 were statistically significant (p<0.001. Conclusion: Significant reduction of candida albicans adherence to the injection acrylic resin materials makes them valuable for patients with high risk of denture stomatitis.

  4. Comparison of Candida Albicans Adherence to Conventional Acrylic Denture Base Materials and Injection Molding Acrylic Materials

    Science.gov (United States)

    Aslanimehr, Masoomeh; Rezvani, Shirin; Mahmoudi, Ali; Moosavi, Najmeh

    2017-01-01

    Statement of the Problem: Candida species are believed to play an important role in initiation and progression of denture stomatitis. The type of the denture material also influences the adhesion of candida and development of stomatitis. Purpose: The aim of this study was comparing the adherence of candida albicans to the conventional and injection molding acrylic denture base materials. Materials and Method: Twenty injection molding and 20 conventional pressure pack acrylic discs (10×10×2 mm) were prepared according to their manufacturer’s instructions. Immediately before the study, samples were placed in sterile water for 3 days to remove residual monomers. The samples were then sterilized using an ultraviolet light unit for 10 minutes. 1×108 Cfu/ml suspension of candida albicans ATCC-10231 was prepared from 48 h cultured organism on sabouraud dextrose agar plates incubated at 37oC. 100 μL of this suspension was placed on the surface of each disk. After being incubated at 37oC for 1 hour, the samples were washed with normal saline to remove non-adherent cells. Attached cells were counted using the colony count method after shaking at 3000 rmp for 20 seconds. Finally, each group was tested for 108 times and the data were statistically analyzed by t-test. Results: Quantitative analysis revealed that differences in colony count average of candida albicans adherence to conventional acrylic materials (8.3×103) comparing to injection molding acrylic resins (6×103) were statistically significant (pcandida albicans adherence to the injection acrylic resin materials makes them valuable for patients with high risk of denture stomatitis. PMID:28280761

  5. Artificial saliva effect on toxic substances release from acrylic resins

    Directory of Open Access Journals (Sweden)

    Kostić Milena

    2015-01-01

    Full Text Available Background/Aim. Acrylic-based resins are intensively used in dentistry practice as restorative or denture-base materials. The purpose of this study was to analyze the surface structure of denture base resins and the amount of released potentially toxic substances (PTS immediately upon polymerization and incubation in different types of artificial saliva. Methods. Storage of acrylic samples in two models of artificial saliva were performed in a water bath at the temperature of 37 ± 1°C. Analysis of the surface structure of samples was carried out using scanning electronic microscopy analysis immediately after polymerization and after the 30-day incubation. The amounts of PTS per day, week and month extracts were measured using high-pressure liquid chromatography. Results. Surface design and amount of PTS in acrylic materials were different and depended on the types and duration of polymerization. The surfaces of tested acrylates became flatter after immersing in solutions of artificial saliva. The degree of acrylic materials release was not dependent on the applied model of artificial saliva. Conclusion. In order to improve biological features of acrylic resin materials, it was recommended that dentures lined with soft or hard coldpolymerized acrylates should be kept at least 1 to 7 days in water before being given to a patient. So, as to reach high degree of biocompatibility preparation of prosthetic restorations from heat-polymerized acrylate was unnecessary. [Projekat Ministarstva nauke Republike Srbije, br. 41017

  6. 21 CFR 177.1310 - Ethylene-acrylic acid copolymers.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as... this section are not applicable to ethylene-acrylic acid copolymers used in food-packaging adhesives... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ethylene-acrylic acid copolymers. 177.1310...

  7. 40 CFR 721.8082 - Polyester polyurethane acrylate.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyester polyurethane acrylate. 721... Substances § 721.8082 Polyester polyurethane acrylate. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as polyester polyurethane...

  8. Occupational fingertip eczema from acrylates in a manicurist

    Directory of Open Access Journals (Sweden)

    Denitza Zheleva

    2015-04-01

    Full Text Available Occupational hand eczema due to acrylates present in the workplace is a disease frequently reported among dentists, printers, and fiberglass workers. Acrylate monomers are used in the production of a great variety of polymers, including nail cosmetics. Our case report demonstrates a rare clinical presentations of allergic contact dermatitis from acrylic nails. Our patient was working as a manicurist and the diagnostic analyses revealed sensitation to some of the (meth acrylate compounds of her new nail cosmetics. Sculptured artificial acrylic and UV-hardened nails s are widely used in developed countries and they are gaining more and more popularity. We expect an increase in the number of cases of contact allergic dermatitis among manicurists and customers.

  9. Antibiotic-loaded acrylic cement: current concepts.

    Science.gov (United States)

    Buchholz, H W; Elson, R A; Heinert, K

    1984-11-01

    Antibiotic-loaded acrylic cement has been used routinely since 1972 at the authors' hospitals, where a series of some 22,000 joint arthroplasty operations was performed from 1964-1983. The current status of the material is presented with up-to-date follow-up statistics on prophylactic therapy and on established deep infections. The results of 869 exchange arthroplasties are compared with results published in 1981. In the future, results will be presented in the form of survival curves. The method by which survival tables and curves are constructed is critical. Investigators should use survival curves for ease of comparison and because of the wide range of possibilities in an analysis of covariable factors. A retrospective actuarial analysis was made of 825 one-stage reimplantations in which antibiotic-loaded acrylic cement was used for infected total hip arthroplasties. Staphylococcus aureus was the most commonly encountered organism. Failure rates of prostheses infected by S. aureus, S. species, and anaerobic corynebacteria did not differ statistically. A factor that significantly contributed to failure of this method of treatment was Pseudomonas infection. By actuarial analysis five years after operation, a success (survival) rate of 77% was calculated.

  10. Allergic contact dermatitis from acrylic nails in a flamenco guitarist.

    Science.gov (United States)

    Alcántara-Nicolás, F A; Pastor-Nieto, M A; Sánchez-Herreros, C; Pérez-Mesonero, R; Melgar-Molero, V; Ballano, A; De-Eusebio, E

    2016-12-01

    Acrylates are molecules that are well known for their strong sensitizing properties. Historically, many beauticians and individuals using store-bought artificial nail products have developed allergic contact dermatitis from acrylates. More recently, the use of acrylic nails among flamenco guitarists to strengthen their nails has become very popular. A 40-year-old non-atopic male patient working as a flamenco guitarist developed dystrophy, onycholysis and paronychia involving the first four nails of his right hand. The lesions were confined to the fingers where acrylic materials were used in order to strengthen his nails to play the guitar. He noticed improvement whenever he stopped using these materials and intense itching and worsening when he began reusing them. Patch tests were performed and positive results obtained with 2-hydroxyethyl methacrylate (2-HEMA), 2-hydroxyethyl acrylate (2-HEA), ethyleneglycol-dimethacrylate (EGDMA) and 2-hydroxypropyl methacrylate (2-HPMA). The patient was diagnosed with occupational allergic contact dermatitis likely caused by acrylic nails. Artificial nails can contain many kinds of acrylic monomers but most cases of contact dermatitis are induced by 2-HEMA, 2-HPMA and EGDMA. This is the first reported case of occupational allergic contact dermatitis from acrylates in artificial nails in a professional flamenco guitar player. Since the practice of self-applying acrylic nail products is becoming very popular within flamenco musicians, we believe that dermatology and occupational medicine specialists should be made aware of the potentially increasing risk of sensitization from acrylates in this setting. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  11. Biocompatibility of acrylic resin after being soaked in sodium hypochlorite

    Directory of Open Access Journals (Sweden)

    Nike Hendrijatini

    2009-06-01

    Full Text Available Background: Acrylic resin as basic material for denture will stay on oral mucosa for a very long time. The polymerization of acrylic resin can be performed by conventional method and microwave, both produce different residual monomer at different toxicity. Acrylic resin can absorb solution, porous and possibly absorb disinfectantt as well, that may have toxic reaction with the tissue. Sodium Hypochlorite as removable denture disinfectant can be expected to be biocompatible to human body. The problem is how biocompatible acrylic resin which has been processed by conventional method and microwave method after being soaked in sodium hypochlorite solution. Purpose: The aim of this study was to understand in vitro biocompatibility of acrylic resin which has polimerated by conventional method and microwave after being soaked in sodium hypochlorite using tissue culture. Methods: Four groups of acrylic resin plate were produced, the first group was acrylic resin plate with microwave polymeration and soaked in sodium hypochlorite, the second group was acrylic resin plate with microwave polymeration but not soaked, the thirdwas one with conventional method and soaked and the last group was one with conventional method but not soaked, and in 1 control group. Each group consists of 7 plates. Biocompatibility test was performed in-vitro on each material using fibroblast tissue culture (BHK-21 cell-line. Result: The percentage between living cells and dead cells from materials which was given acrylic plate was wounted. The data was analyzed statistically with T test. Conclusion: The average value of living cells is higher in acrylic resin poimerization using microwave method compared to conventional method, in both soaked and non soaked (by sodium hypochlorite group. This means that sodium hypochlorite 0.5% was biocompatible to the mouth mucosa as removable denture disinfectant for 10 minutes soaking and washing afterwards.

  12. Comparison of the Retinal Straylight in Pseudophakic Eyes with PMMA, Hydrophobic Acrylic, and Hydrophilic Acrylic Spherical Intraocular Lens

    Directory of Open Access Journals (Sweden)

    Ya-wen Guo

    2014-01-01

    Full Text Available Purpose. To investigate the intraocular straylight value after cataract surgery. Methods. In this study, 76 eyes from 62 patients were subdivided into three groups. A hydrophobic acrylic, a hydrophilic acrylic, and a PMMA IOL were respectively, implanted in 24 eyes, 28 eyes, and 24 eyes. Straylight was measured using C-Quant at 1 week and 1 month postoperatively in natural and dilated pupils. Results. The hydrophilic acrylic IOLs showed significantly lower straylight values than those of the hydrophobic acrylic IOLs in dilated pupils at 1 week and 1 month after surgery (P0.05. Moreover, no significant difference was found in straylight between natural and dilated pupils in each group at 1 week and 1 month postoperatively (P>0.05. Conclusions. Although the hydrophobic acrylic IOL induced more intraocular straylight, straylight differences among the 3 IOLs were minimal. Pupil size showed no effect on intraocular straylight; the intraocular straylight was stable 1 week after surgery.

  13. Hyperbranched Acrylated Aromatic Polyester Used as a Modifier in UV-Curable Epoxy Acrylate Resins

    Institute of Scientific and Technical Information of China (English)

    KOU,Hui-Guang; ASIF,Anila; SHI,Wen-Fang

    2003-01-01

    The viscosity, the shrinkage degree and the photoplymerization rate of the epoxy acrylate (EB600 ) blended with hyperbranched acrylated aromatic polyester ( HAAPE ) were investigated. The addition of HAAPE into EB600 largely reduces the viscosity of the blend formulation and the shrinkage degree. For example, EB600resin with 50% weight fraction of HAAPE has the 1250 cps of the viscosity and 2.0% of shrinkage degree, while the pure EB600 resin has 3000 cps of the viscosity and 10.5% of shrinkage degree. The photopolymerization rate of the rein is also promoted by HAAPE addition. The good miscibility between HAAPE and EB600 was also observed from the dynamic mechanical analysis. The tensile, flexural and compressive strength, and the thermal properties of the UVcured films are greatly improved.

  14. Poly(lauryl acrylate) and poly(stearyl acrylate) grafted multiwalled carbon nanotubes for polypropylene composites

    DEFF Research Database (Denmark)

    Daugaard, Anders Egede; Jankova Atanasova, Katja; Hvilsted, Søren

    2014-01-01

    in loading after 12 h of polymerization. The modified nanomaterials were melt mixed into polypropylene composites with very low filler loading (0.3 wt%), whereafter both the thermal and electrical properties were investigated by DSC and dielectric resonance spectroscopy. The electrical properties were found...... to be substantially improved, where poly(lauryl acrylate) was found to be the superior surface modification, resulting in a conductive composite....

  15. Use of Acrylic Acid Sodium Acrylate Polymer to Maintain Cocoa Seed Viability

    Directory of Open Access Journals (Sweden)

    Pudji Rahardjo

    2010-08-01

    Full Text Available The main problem of cocoa seed storage is moisture content of the seeds because cocoa seeds will germinate if cocoa seeds moisture content is high. The objective of this research is to maintain the cocoa seeds viability in storage using acrylic acid sodium acrylate polymer (AASAP. The function of AASAP is to absorb humidity in storage due to their ability to retain water and to prevent water loss. The experiment was conducted in a laboratory of Indonesian Coffee and Cocoa Research Institute and in Kaliwining Experimental Garden. This experiment was arranged by factorial randomized complete design, in wich AASAP dosages 0%; 0.1% (0.1 g/100 seeds; 0.2% (0.2 g/100 seeds, 0.3% (0.3 g/100 seeds, 0,4% (0,4g/100 seeds, combined with seeds storage period 1, 2, 3 and 4 weeks. The experiment used 3 replications and each repli cation used 100 seeds. Parameter of observation consisted of percentage of seeds germinated in storage, percentage of seeds infected by fungi in storage, seeds moisture content, percentage of seeds germination after storage, and early growth of cocoa seedlings. The results of the experiment showed that AASAP application with some dosages cocoa seeds storage cause to germinate in storage during 2 weeks. AASAP application with some dosages in cocoa seeds storage for 2 weeks would not result in infection by fungi and did not significantly affect seed germination after storage for 1, 2 and 4 weeks, and percentage of germination of cocoa seed after storage for 3 weeks decreased with increase dosage of AASAP. Higher dosage of AASAP would reduce early growth of cocoa seedling. Key words : Theobroma cacao, seed, acrylic acid sodium acrylate, seed storage, viabilty.

  16. COMPARATIVE ANALYSIS OF WATER SORPTION BY DIFFERENT ACRYLIC MATERIALS

    Directory of Open Access Journals (Sweden)

    Milena Kostić

    2014-06-01

    Full Text Available Acrylic materials are used daily for the production of mobile dental restorations and orthodontic appliances. The presence of residual monomer, as a product of incomplete polymerisation of material, results in more porous structure of the material, which greatly reduces the mechanical and physical quality of the acrylic restorations and increases the absorption of liquids. The aim of this study was to examine the water absorption of different types of resin material. In the study it was assumed that the cold polymerized acrylates show a greater potential for absorbing fluid from the environment in relation to the hot polymerized acrylic. The study included two hot and two cold polymerized acrylates, and cold polymerized acrylate impregnated with aesthetic pearls. In order to determine the degree of water absorption, the mass of the samples was measured before and after one day, seven days and thirty days of immersion in a water bath of body temperature. The tested hot and cold polymerized acrylates after immersion in water bath showed standard values of water absorption. The degree of water absorption was not significantly influenced by the type and manner of polymerisation. Water absorption values were significantly higher after seven days and thirty days of water storage relative to the observational period of one day.

  17. Electrochemical characterization of aminated acrylic conducting polymer

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, Norma Mohammad [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Lestari Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor Darul Ehsan (Malaysia); Heng, Lee Yook [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Lestari Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor Darul Ehsan (Malaysia); Southeast Asia Disaster Prevention Research Initiative, Lestari Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor Darul Ehsan (Malaysia); Ling, Tan Ling [Southeast Asia Disaster Prevention Research Initiative, Lestari Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor Darul Ehsan (Malaysia)

    2015-09-25

    New attempt has been made to synthesize aminated acrylic conducting polymer (AACP) using precursor of phenylvinylsulfoxide (PVS). The process was conducted via the integration of microemulsion and photopolymerization techniques. It has been utilized for covalent immobilization of amino groups by the adding of N-achryiloxisuccinimide (NAS). Thermal eliminating of benzene sulfenic acids from PVS has been done at 250 °C to form electroactive polyacetylene (PA) segment. Characterization of AACP has been conducted using fourier transform infrared (FTIR), scanning electron microscopy (SEM) and linear sweep cyclic voltammetry (CV). A range of 0.3-1.25μm particle size obtained from SEM characterization. A quasi-reversible system performed as shown in electrochemical study.

  18. Flexible, stretchable electroadhesives based on acrylic elastomers

    Science.gov (United States)

    Duduta, Mihai; Wood, Robert J.; Clarke, David R.

    2016-04-01

    Controllable adhesion is a requirement for a wide variety of applications including robotic manipulation, as well as locomotion including walking, crawling and perching. Electroadhesives have several advantages such as reversibility, low power consumption and controllability based on applied voltage. Most demonstrations of electroadhesive devices rely on fairly rigid materials, which cannot be stretched reversibly, as needed in some applications. We have developed a fast and reliable method for building soft, stretchable electroadhesive pads based on acrylic elastomers and electrodes made of carbon nanotubes. The devices produced were tested pre-deformation and in a stretched configuration. The adhesive force was determined to be in the 0.1 - 3.0 N/cm2 range, depending on the adhering surface. The electroadhesive devices were integrated with pre-stretched dielectric elastomer actuators to create a device in which the adhesion force could be tuned by changes in either the applied voltage or total area.

  19. Poly(amide-graft-acrylate) interfacial compounds

    Science.gov (United States)

    Zamora, Michael Perez

    Graft copolymers with segments of dissimilar chemistries have been shown to be useful in a variety of applications as surfactants, compatibilizers, impact modifiers, and surface modifiers. The most common route to well defined graft copolymers is through the use of macromonomers, polymers containing a reactive functionality and thus capable of further polymerization. However, the majority of the studies thus far have focused on the synthesis of macromonomers capable of reacting with vinyl monomers to form graft copolymers. This study focused on the synthesis of macromonomers capable of participating in condensation polymerizations. A chain transfer functionalization method was utilized. Cysteine was evaluated as a chain transfer agent for the synthesis of amino acid functionalized poly(acrylate) and poly(methacrylate) macromonomers. Low molar mass, functionalized macromonomers were produced. These macromonomers were proven to be capable of reacting with amide precursors to form poly(amide-g-acrylate) graft copolymers. Macromonomers and graft copolymers were characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) spectroscopy, elemental analysis (EA), inductively coupled plasma (ICP), and differential scanning calorimetry (DSC). The second part of this research involved poly(dimethacrylate) dental restorative materials. Volumetric shrinkage during the cure of these resins results in a poor interface between the resin and the remaining tooth structure, limiting the lifetime of these materials. Cyclic anhydrides were incorporated into common monomer compositions used in dental applications. Volume expansion from the ring opening hydrolysis of these anhydrides was shown to be feasible. The modified dental resins were characterized by swelling, extraction and ultraviolet spectroscopy (UV), and density measurements. Linear poLymers designed to model the crosslinked dental resins were

  20. Conversion of Lignocellulosic Biomass to Ethanol and Butyl Acrylate

    Energy Technology Data Exchange (ETDEWEB)

    Binder, Thomas [Archer Daniels Midland Company, Decatur, IL (United States); Erpelding, Michael [Archer Daniels Midland Company, Decatur, IL (United States); Schmid, Josef [Archer Daniels Midland Company, Decatur, IL (United States); Chin, Andrew [Archer Daniels Midland Company, Decatur, IL (United States); Sammons, Rhea [Archer Daniels Midland Company, Decatur, IL (United States); Rockafellow, Erin [Archer Daniels Midland Company, Decatur, IL (United States)

    2015-04-10

    Conversion of Lignocellulosic Biomass to Ethanol and Butyl Acrylate. The purpose of Archer Daniels Midlands Integrated Biorefinery (IBR) was to demonstrate a modified acetosolv process on corn stover. It would show the fractionation of crop residue to distinct fractions of cellulose, hemicellulose, and lignin. The cellulose and hemicellulose fractions would be further converted to ethanol as the primary product and a fraction of the sugars would be catalytically converted to acrylic acid, with butyl acrylate the final product. These primary steps have been demonstrated.

  1. Performance behavior of modified cellulosic fabrics using polyurethane acrylate copolymer.

    Science.gov (United States)

    Zuber, Mohammad; Shah, Sayyed Asim Ali; Jamil, Tahir; Asghar, Muhammad Irfan

    2014-06-01

    The surface of the cellulosic fabrics was modified using self-prepared emulsions of polyurethane acrylate copolymers (PUACs). PUACs were prepared by varying the molecular weight of polycaprolactone diol (PCL). The PCL was reacted with isophorone diisocyanate (IPDI) and chain was extended with 2-hydroxy ethyl acrylate (HEA) to form vinyl terminated polyurethane (VTPU) preploymer. The VTPU was further co-polymerized through free radical polymerization with butyl acrylate in different proportions. The FT-IR spectra of monomers, prepolymers and copolymers assured the formation of proposed PUACs structure. The various concentrations of prepared PUACs were applied onto the different fabric samples using dip-padding techniques. The results revealed that the application of polyurethane butyl acrylate copolymer showed a pronounced effect on the tear strength and pilling resistance of the treated fabrics.

  2. Rare linking hydrogels based on acrylic acid and carbohydrate esters

    Directory of Open Access Journals (Sweden)

    U. Akhmedov

    2012-09-01

    Full Text Available The process of copolymerization of acrylic acid and esters poliallil sucrose; pentaerythritol and sorbitol, some of its laws are identified. The kinetic regularities of copolymerization and the optimum conditions of synthesis was established.

  3. BARRIER PROPERTY AND STRUCTURE OF ACRYLONITRILE/ACRYLIC COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    YANG Zhenghua; LI Yuesheng

    1997-01-01

    A series of acrylonitrile (AN) copolymers with methyl acrylate (MA) or ethyl acrylate (EA) as comonomer (5-23 wt%) was prepared by free-radical copolymerization. The permeability coefficients of the copolymers to oxygen and carbon dioxide were measured at 1.0 MPa and at 30 ℃, and those to water vapor also measured at 100% relative humidity and at 30 ℃. All the AN/acrylic copolymers are semicrystalline. As the acrylate content increase, the permeability coefficients of the copolymers to oxygen and carbon dioxide are increased progressively, but those to water vapor are decreased progressively. The gas permeability coefficients of the polymers were correlated with free-volume fractions or the ratio of free volume to cohesive energy.

  4. Nucleophilic Addition of Reactive Dyes on Amidoximated Acrylic Fabrics

    OpenAIRE

    2014-01-01

    Seven reactive dyes judiciously selected based on chemical structures and fixation mechanisms were applied at 2% owf of shade on amidoximated acrylic fabrics. Amidoximated acrylic fabric has been obtained by a viable amidoximation process. The dyeability of these fabrics was evaluated with respect to the dye exhaustion, fixation, and colour strength under different conditions of temperature and dyeing time. Nucleophilic addition type reactive dyes show higher colour data compared to nucleophi...

  5. Antimicrobial activity of poly(acrylic acid) block copolymers

    Energy Technology Data Exchange (ETDEWEB)

    Gratzl, Günther, E-mail: guenther.gratzl@jku.at [Johannes Kepler University Linz, Institute for Chemical Technology of Organic Materials, Altenberger Str. 69, 4040 Linz (Austria); Paulik, Christian [Johannes Kepler University Linz, Institute for Chemical Technology of Organic Materials, Altenberger Str. 69, 4040 Linz (Austria); Hild, Sabine [Johannes Kepler University Linz, Institute of Polymer Science, Altenberger Str. 69, 4040 Linz (Austria); Guggenbichler, Josef P.; Lackner, Maximilian [AMiSTec GmbH and Co. KG, Leitweg 13, 6345 Kössen, Tirol (Austria)

    2014-05-01

    The increasing number of antibiotic-resistant bacterial strains has developed into a major health problem. In particular, biofilms are the main reason for hospital-acquired infections and diseases. Once formed, biofilms are difficult to remove as they have specific defense mechanisms against antimicrobial agents. Antimicrobial surfaces must therefore kill or repel bacteria before they can settle to form a biofilm. In this study, we describe that poly(acrylic acid) (PAA) containing diblock copolymers can kill bacteria and prevent from biofilm formation. The PAA diblock copolymers with poly(styrene) and poly(methyl methacrylate) were synthesized via anionic polymerization of tert-butyl acrylate with styrene or methyl methacrylate and subsequent acid-catalyzed hydrolysis of the tert-butyl ester. The copolymers were characterized via nuclear magnetic resonance spectroscopy (NMR), size-exclusion chromatography (SEC), Fourier transform infrared spectroscopy (FTIR), elemental analysis, and acid–base titrations. Copolymer films with a variety of acrylic acid contents were produced by solvent casting, characterized by atomic force microscopy (AFM) and tested for their antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The antimicrobial activity of the acidic diblock copolymers increased with increasing acrylic acid content, independent of the copolymer-partner, the chain length and the nanostructure. - Highlights: • Acrylic acid diblock copolymers are antimicrobially active. • The antimicrobial activity depends on the acrylic acid content in the copolymer. • No salts, metals or other antimicrobial agents are needed.

  6. Application of reactive acrylate microgels in water-base coatings

    Institute of Scientific and Technical Information of China (English)

    SA Sheng-shu; ZHANG Bao-hua; YANG Qing; WANG Xia-qin; MAO Zhi-ping

    2009-01-01

    Reactive acrylate microgels with different reactive groups such as carboxyl, hydroxide groups had excellent prop-erties such as quick-dry, low viscosity, high adhesion and hardness, which made them extensively used in preparing paints or in coating-modification. Reactive acrylate microgels were prepared by emulsion co-polymerization with zwitterions surfactant, anionic surfactant and nonionic surfactant as co-emulsifier. The water-base baking paints made from reactive acrylate micro-gels and melamine-formaldehyde resin had excellent combination properties. The aluminium powder can be well-dispersed in the paints. The influences of monomer components on the properties of the water-base baking paints were discussed in this paper. And the baking paints were also compared with the marketing solvent acrylate baking paints. It was found that the water-base acrylate amino baking paints had better combination properties than the organic solvent acrylate baking paints, which means that the water-base baking paints had a bright marketing future.

  7. Poly(meth)acrylates obtained by cascade reaction.

    Science.gov (United States)

    Popescu, Dragos; Keul, Helmut; Moeller, Martin

    2011-04-04

    Preparation, purification, and stabilization of functional (meth)acrylates with a high dipole moment are complex, laborious, and expensive processes. In order to avoid purification and stabilization of the highly reactive functional monomers, a concept of cascade reactions was developed comprising enzymatic monomer synthesis and radical polymerization. Transacylation of methyl acrylate (MA) and methyl methacrylate (MMA) with different functional alcohols, diols, and triols (1,2,6-hexanetriol and glycerol) in the presence of Novozyme 435 led to functional (meth)acrylates. After the removal of the enzyme by means of filtration, removal of excess (meth)acrylate and/or addition of a new monomer, e.g., 2-hydroxyethyl (meth)acrylate the (co)polymerization via free radical (FRP) or nitroxide mediated radical polymerization (NMP) resulted in poly[(meth)acrylate]s with predefined functionalities. Hydrophilic, hydrophobic as well as ionic repeating units were assembled within the copolymer. The transacylation of MA and MMA with diols and triols carried out under mild conditions is an easy and rapid process and is suitable for the preparation of sensitive monomers.

  8. Stabilizing effects of estertins mercaptide (methyl acrylate) for PVC degradation

    Science.gov (United States)

    Zhang, S. H.; Liu, T. M.; Li, J. L.; Wang, C. R.; Li, C.; Wang, Z. Q.

    2016-07-01

    The thermal and UV light (ultraviolet light) stability of PVC films with estertins mercaptide (methyl acrylate), methyltins mercaptide and the compound consisted of estertins mercaptide (methyl acrylate) and hydrotalcite (2:2.5) were investigated by ageing in a circulation oven at 190 °C and irradiating with 72W UV light for 96h, respectively, and then the yellowness and transmission rate were tested by Color Quest XE. Hydrotalcite was proved to have good synergies with estertins mercaptide (methyl acrylate) on improving the thermal stability and UV light stability. The retarding effects of the heat stabilizers to PVC degradation were tested by TGA from 50°C to 600°C. The results show that temperature of HCl evolution from PVC film was improved obviously by compounding with estertins mercaptide(methyl acrylate) and hydrotalcite and estertins mercaptide(methyl acrylate) was found to have a better long term stability. Sn4+ consistence of water and seawater in which films before and after UV light irradiation were soaked for 60 days was analyzed by ICP; the results indicate that the Sn4+ consistence from the films with estertins mercaptide(methyl acrylate) as thermal stabilizer was lower than that from the film with methyltins mercaptide. The crosslink moderately by UV irradiation for PVC films can hold back the dissolution of organotin heat stabilizers from PVC products into water and seawater.

  9. Advances in acrylic-alkyd hybrid synthesis and characterization

    Science.gov (United States)

    Dziczkowski, Jamie

    2008-10-01

    In situ graft acrylic-alkyd hybrid resins were formed by polymerizing acrylic and acrylic-mixed monomers in the presence of alkyds by introduction of a free radical initiator to promote graft formation. Two-dimensional NMR, specifically gradient heteronuclear multiple quantum coherence (gHMQC), was used to clarify specific graft sites of the hybrid materials. Both individual and mixed-monomer systems were produced to determine any individual monomer preferences and to model current acrylic-alkyd systems. Different classes of initiators were used to determine any initiator effects on graft location. The 2D-NMR results confirm grafting at doubly allylic hydrogens located on the fatty acid chains and the polyol segment of the alkyd backbone. The gHMQC spectra show no evidence of grafting across double bonds on either pendant fatty acid groups or THPA unsaturation sites for any of the monomer or mixed monomer systems. It was also determined that choice of initiator has no effect on graft location. In addition, a design of experiments using response surface methodology was utilized to obtain a better understanding of this commercially available class of materials and relate both the chemical and physical properties to one another. A Box-Behnkin design was used, varying the oil length of the alkyd phase, the degree of unsaturation in the polyester backbone, and acrylic to alkyd ratio. Acrylic-alkyd hybrid resins were reduced with an amine/water mixture. Hydrolytic stability was tested and viscoelastic properties were obtained to determine crosslink density. Cured films were prepared and basic coatings properties were evaluated. It was found that the oil length of the alkyd is the most dominant factor for final coatings properties of the resins. Acrylic to alkyd ratio mainly influences the resin properties such as acid number, average molecular weight, and hydrolytic stability. The degree of unsaturation in the alkyd backbone has minimal effects on resin and film

  10. 圆锥角膜患者验配RGP便捷方法探讨%Investigating a convenient method of fitting keratoconus patients for RGP

    Institute of Scientific and Technical Information of China (English)

    李秀红; 段素芳; 吕勇; 符爱存; 尚丽娜; 朱豫

    2016-01-01

    目的 通过了解硬性高透气性角膜接触镜(rigid gas permeable corneal contact lens,RGP)度数(degree of rigid gas permeable corneal contact lens,RGPD)与主觉验光等效球镜度(spherical equivalent degree,SSED)之间关系,RGP最佳矫正视力(best corrected visual acuity of rigid gas permeable corneal contact lens,RGPVA)与裸眼视力(uncorrected visual acuity,UCVA)、主觉验光最佳矫正视力(best corrected visual acuity of subjective refraction,SBCVA)之间关系,探讨圆锥角膜患者验配RGP便捷方法,观察RGP矫治圆锥角膜患者的疗效、安全性、舒适度及并发症.方法 收集2011年7月至2015年5月我院圆锥角膜患者64例(102眼),记录UCVA、主觉验光结果及其SSED、RGPVA、RGPD及定期复查情况.为探讨RGPD、RGPVA与SSED、SBCVA间大小及关系,分别把圆锥角膜102眼作为一组(A)及以散光度数2.0 CD、3.0 CD、4.0 CD、5.0 CD、6.0 CD为界分别把102眼分为两组,即(B1、B2)、(C1、C2)、(D1、D2)、(E1、E2)、(F1、F2)来研究.结果 相关性分析:除F2组外,其他各组RGPD与SSED均呈正相关(均为P<0.01);除E2、F2组外,其他各组RGPVA与SBCVA均呈正相关(均为P<0.01);所有组RGPVA与UCVA间均无相关性(均为P>0.01).差异分析:除D2、E2、F2组外,其他各组RGPD与SSED度数差异均无统计学意义(均为P>0.05).所有组RGPVA较UCVA、SBCVA均有明显提高(均为P<0.05).随访期间RGP配戴者无明显不适及严重并发症发生.结论 圆锥角膜患者其主觉验光度数和视力可为RGP验配提供重要参考,使RGP验配更快捷,但随着散光度数的增加,此参考价值减小.圆锥角膜患者配戴RGP后能达到更好的矫正视力,并有较高的舒适度和安全性.

  11. Acrylated chitosan for mucoadhesive drug delivery systems.

    Science.gov (United States)

    Shitrit, Yulia; Bianco-Peled, Havazelet

    2017-01-30

    A new mucoadhesive polymer was synthesized by conjugating chitosan to poly(ethylene glycol)diacrylate (PEGDA) via the Michael type reaction. The product was characterized using NMR. Higher PEGDA grafting efficacy was observed with low molecular weight PEGDA (0.7kDa), compared to long 10kDa PEGDA. The acrylation percentage was calculated based on the reaction of ninhydrin with chitosan, and supported the qualitative NMR findings. The adhesive properties were studied by tensile test and rotating system involving detachment of polymer tablets from a fresh intestine sample. Chitosan modified with high molecular weight PEGDA presented improvement in mucoadhesive properties compared to both non-modified and thiolated chitosan. On the molecular level, rheology measurements of polymer/mucin mixtures provided additional evidence of strong interaction between modified chitosan and mucin glycoproteins. This new polymer shows promise as a useful polymeric carrier matrix for delivery systems, which could provide prolonged residence time of the vehicle on the mucosa surface. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Clinical Aspects of Combination of Ceramic and Acrylic Occlusal Surfaces

    Directory of Open Access Journals (Sweden)

    Z. Ozhohan

    2017-03-01

    Full Text Available The objective of the research was to develop and substantiate the methods of constructing the occlusal surfaces when manufacturing aesthetic fixed restorations through the combination of different materials. Materials and methods. The study included 65 patients with ceramic and acrylic occlusal surfaces of aesthetic fixed dental prostheses. Group I included 21 patients with a combination of ceramic and acrylic occlusal surfaces. Group II included 22 patients with a combination of ceramic occlusal surfaces. Group III included 22 patients with a combination of acrylic occlusal surfaces. The patients were observed 3, 6 and 12 months after prosthetic repair. Results. The greatest increase in the occlusal contact surface area of fixed restorations was observed in Group I, that is, when combining dental prostheses with ceramic and acrylic occlusal surfaces. Considering uneven abrasion of the occlusal surfaces, we do not recommend to combine different materials when veneering the occlusal surface of the antagonistic teeth. Conclusions. This study demonstrated the important role of the correct combination of materials when veneering the occlusal surfaces. Physical and chemical properties of materials, namely the abrasion resistance play a significant role in the long-term denture functioning. The smallest increase in the occlusal contact surface area was observed in Group II when combining ceramic occlusal surfaces. It was due to a good abrasion resistance of ceramics as compared to acrylic resin as well as the presence of the glazed layer which prevents the premature abrasion of the occlusal surfaces of the antagonistic teeth due to lower surface roughness. The combination of acrylic resin and ceramics when constructing the occlusal surfaces of fixed restorations in Group I demonstrated the highest rate of the increase in the occlusal contact surface area – 9.93%. It was due to a low hardness of acrylic resin and its high surface roughness. In

  13. A clinical observation of spherical RGP on the correction of high corneal astigmatism%球面透气性硬性角膜接触镜矫正高度角膜散光

    Institute of Scientific and Technical Information of China (English)

    李军; 亢晓丽; 饶玉; 栗丽; 杨丽; 汪芳润

    2007-01-01

    目的 评价球面透气性硬性角膜接触镜(rigid gas permeable contact lens,RGP)矫正高度角膜散光(≥3.00 D)时的有效性、稳定性和患者耐受性.方法 选择高度角膜散光患者41例55眼,经角膜曲率检查、电脑验光、检影验光、综合验光仪验光,确认为总散光与角膜散光基本一致者,进行试戴片配适评估、戴片验光,给予配戴球面RGP.定期回访,记录矫正视力、镜片配适及配戴情况.结果 RGP最佳矫正视力:30眼(占54.5%)高于框架镜,22眼(占40.0%)等于框架镜,3眼(占5.5%)低于框架镜.患者均获得稳定配适.随访1~65个月(平均40.5个月),3例(4眼)患者因不能适应镜片的异物感而停戴.其余38例(51眼)仍坚持配戴,并对该矫正方法满意.结论 应用球面RGP矫正高度角膜散光,可获得良好配适和满意的视力矫正效果.多数患者能够坚持长期配戴.

  14. Large deformation micromechanics of particle filled acrylics at elevated temperatures

    Science.gov (United States)

    Gunel, Eray Mustafa

    The main aim of this study is to investigate stress whitening and associated micro-deformation mechanism in thermoformed particle filled acrylic sheets. For stress whitening quantification, a new index was developed based on image histograms in logarithmic scale of gray level. Stress whitening levels in thermoformed acrylic composites was observed to increase with increasing deformation limit, decreasing forming rate and increasing forming temperatures below glass transition. Decrease in stress whitening levels above glass transition with increasing forming temperature was attributed to change in micro-deformation behavior. Surface deformation feature investigated with scanning electron microscopy showed that source of stress whitening in thermoformed samples was a combination of particle failure and particle disintegration depending on forming rate and temperature. Stress whitening level was strongly correlated to intensity of micro-deformation features. On the other hand, thermoformed neat acrylics displayed no surface discoloration which was attributed to absence of micro-void formation on the surface of neat acrylics. Experimental damage measures (degradation in initial, secant, unloading modulus and strain energy density) have been inadequate in describing damage evolution in successive thermoforming applications on the same sample at different levels of deformation. An improved version of dual-mechanism viscoplastic material model was proposed to predict thermomechanical behavior of neat acrylics under non-isothermal conditions. Simulation results and experimental results were in good agreement and failure of neat acrylics under non-isothermal conditions ar low forming temperatures were succesfully predicted based on entropic damage model. Particle and interphase failure observed in acrylic composites was studied in a multi-particle unit cell model with different volume fractions. Damage evolution due to particle failure and interphase failure was simulated

  15. Impact Delamination and Fracture in Aluminum/Acrylic Sandwich Plates

    Science.gov (United States)

    Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

    2000-01-01

    Impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F. Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

  16. Acrylic Resin Cytotoxicity for Denture Base--Literature Review.

    Science.gov (United States)

    Goiato, Marcelo C; Freitas, Emily; dos Santos, Daniela; de Medeiros, Rodrigo; Sonego, Mariana

    2015-01-01

    Acrylic resin is a widely used material in clinical practice, and a satisfactory biocompatibility is essential. When the resin polymerization reaction is incomplete, residual monomers are released into the oral cavity. The aim of this study was to evaluate, through a literature review, the cytotoxicity caused by the denture base acrylic resin used, and its components. The selection of published studies was performed on the Pubmed database from January 2008 to July 2013. The keywords used were: "cytotoxicity and acrylic resins", "cytotoxicity and denture base resins" and "cytotoxicity and oral prosthesis". Inclusion criteria were: in vitro studies and literature reviews published in English that evaluated the acrylic resin cytotoxicity for denture base and its components. Studies with no reference to the search strategy were excluded. A total of 182 articles were found. Among these, only 13 were included for writing this review. The MTT test is the most common test used to evaluate acrylic resin cytotoxicity. Auto-polymerized resin is more cytotoxic than heat-polymerized resin because of its higher quantity of residual monomers which cause cell and tissue changes in the oral mucosa. However, more studies are necessary for the development of biocompatible materials.

  17. PHOTOINDUCED GRAFTING OF ACRYLIC AND ALLYL MONOMERS ON POLYETHYLENE SURFACE

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhenfeng; HU Xingzhou; YAN Qing

    1995-01-01

    Photoinduced grafting of acrylic and allyl monomers on polyethylene surface was generally studied by using benzophenone (BP) as a photoinitiator. The grafting process was carried out either in vapor-phase or in solution of the monomers. In the vapor-phase reaction with a filter used to cut off the short wavelength UV light, allyl amine is the most reactive of the four monomers used and acrylic amide is comparatively more reactive than acrylic acid and allyl alcohol. Acetone, as a solvent and carrier for initiator and monomers, however, shows its reactivity to participate the reaction. The solution grafting with a filter is much faster than the corresponding vapor-phase reaction, and a fully covered surface by the grafted polymer can be achieved in this way.

  18. Lightweight bonded acrylic facing at the Vitra VSL Factory

    Directory of Open Access Journals (Sweden)

    Matthias Michel

    2013-12-01

    Full Text Available Acrylic glass is omnipresent in the industrialised world; but as a building material most architects, facade planners and engineers are still unfamiliar with this material. In most cases it is applied as a substitute for glass which leads to inappropriate joints and fixtures. During the years of the path toward the digital era, the authors were in the fortunate position to be involved in several unconventional glass and acrylic glass projects.On the basis of their most recent project, the  facade of the Vitra VSL Factory by SANAA Architekten, they describe the development of a facade for which they chose acrylic glass not as a substitute for glass but rather as a conscious material choice. Since the entire facade is it was possible to apply the manufacturing technology of deep-drawing, allowing for very thin wall thicknesses.

  19. Nucleophilic Addition of Reactive Dyes on Amidoximated Acrylic Fabrics

    Directory of Open Access Journals (Sweden)

    Reda M. El-Shishtawy

    2014-01-01

    Full Text Available Seven reactive dyes judiciously selected based on chemical structures and fixation mechanisms were applied at 2% owf of shade on amidoximated acrylic fabrics. Amidoximated acrylic fabric has been obtained by a viable amidoximation process. The dyeability of these fabrics was evaluated with respect to the dye exhaustion, fixation, and colour strength under different conditions of temperature and dyeing time. Nucleophilic addition type reactive dyes show higher colour data compared to nucleophilic substitution ones. FTIR studies further implicate the binding of reactive dyes on these fabrics. A tentative mechanism is proposed to rationalize the high fixation yield obtained using nucleophilic addition type reactive dyes. Also, the levelling and fastness properties were evaluated for all dyes used. Excellent to good fastness and levelling properties were obtained for all samples irrespective of the dye used. The result of investigation offers a new method for a viable reactive dyeing of amidoximated acrylic fabrics.

  20. Nucleophilic addition of reactive dyes on amidoximated acrylic fabrics.

    Science.gov (United States)

    El-Shishtawy, Reda M; El-Zawahry, Manal M; Abdelghaffar, Fatma; Ahmed, Nahed S E

    2014-01-01

    Seven reactive dyes judiciously selected based on chemical structures and fixation mechanisms were applied at 2% of of shade on amidoximated acrylic fabrics. Amidoximated acrylic fabric has been obtained by a viable amidoximation process. The dyeability of these fabrics was evaluated with respect to the dye exhaustion, fixation, and colour strength under different conditions of temperature and dyeing time. Nucleophilic addition type reactive dyes show higher colour data compared to nucleophilic substitution ones. FTIR studies further implicate the binding of reactive dyes on these fabrics. A tentative mechanism is proposed to rationalize the high fixation yield obtained using nucleophilic addition type reactive dyes. Also, the levelling and fastness properties were evaluated for all dyes used. Excellent to good fastness and levelling properties were obtained for all samples irrespective of the dye used. The result of investigation offers a new method for a viable reactive dyeing of amidoximated acrylic fabrics.

  1. Lightweight bonded acrylic facing at the Vitra VSL Factory

    Directory of Open Access Journals (Sweden)

    Matthias

    2013-12-01

    Full Text Available Corresponding author: Matthias Michel, E-mail: michel@imagine-structure.eu Acrylic glass is omnipresent in the industrialised world; but as a building material most architects, facade planners and engineers are still unfamiliar with this material. In most cases it is applied as a substitute for glass which leads to inappropriate joints and fixtures. During the years of the path toward the digital era, the authors were in the fortunate position to be involved in several unconventional glass and acrylic glass projects. On the basis of their most recent project, the facade of the Vitra VSL Factory by SANAA Architekten, they describe the development of a facade for which they chose acrylic glass not as a substitute for glass but rather as a conscious material choice. Since the entire facade is it was possible to apply the manufacturing technology of deep-drawing, allowing for very thin wall thicknesses.

  2. Synthesis and Demulsibility of the Terpolymer Demulsifier of Acryl Resin

    Institute of Scientific and Technical Information of China (English)

    KANG,Wan-Li; MENG,Ling-Wei; ZHANG,Hong-Yan; LIU,Shu-Ren

    2008-01-01

    Terpolymer demulsifier of acryl resin has been synthesized through solution polymerization with water as a dissolvent,potassium persulfate as an initiator and the monomers of methyl methacrylate,butyl acrylate and acrylic acid as starting materials.The effects of the reaction temperature,dripping time,the amount of monomers and initiator on the dehydration rate of the demulsifier were investigated by an orthogonal experiment.It shows that the stronger influence on the dehydration rate among six factors is reaction temperature,dripping time,and amount of catalyst,while monomer has weak influence.The performance of the demulsifier was evaluated under different demulsification time,temperatures and concentrations of the screened demulsifiers.The result shows that the dehydration rate of the demulsifier can reach over 67%,which is better than that by the emulsion polymerization way.

  3. Preparation and Characterization of Acrylic Primer for Concrete Substrate Application

    Directory of Open Access Journals (Sweden)

    El-Sayed Negim

    2016-01-01

    Full Text Available This study dealt with the properties of acrylic primer for concrete substrate using acrylic syrup, made from a methyl methacrylate monomer solution of terpolymers. Terpolymer systems consisting of methyl methacrylate (MMA, 2-ethylhexyl acrylate (2-EHA, and methacrylic acid (MAA with different chemical composition ratios of MMA and 2-EHA were synthesized through bulk polymerization using azobisisobutyronitrile (AIBN as initiator. The terpolymer composition is characterized by FTIR, 1H NMR, DSC, TGA, and SEM. The glass transition temperature and the thermal stability increased with increasing amounts of MMA in the terpolymer backbone. The effect of chemical composition of terpolymers on physicomechanical properties of primer films was investigated. However, increasing the amount of MMA in terpolymer backbone increased tensile and contact angle of primer films while elongation at break, water absorption, and bond strength are decreased. In particular, the primer syrup containing 65% 2-EHA has good bonding strength with concrete substrate around 1.1 MPa.

  4. Star polymers by ATRP of styrene and acrylates employing multifunctional initiators

    DEFF Research Database (Denmark)

    Jankova, Katja Atanassova; Bednarek, Melania; Hvilsted, Søren

    2005-01-01

    weight distributions (PDI ... ligand. Under these conditions, higher conversions were possible still maintaining low PDI signaling controlled star growth. Multiarm stars of poly(n-butyl acrylate) and poly(n-hexyl acrylate) with controlled characteristics have also been prepared....

  5. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins

    Directory of Open Access Journals (Sweden)

    Nour M. Ajaj-ALKordy

    2014-01-01

    Conclusion: Within the limitations of this study, it can be concluded that the high-impact acrylic resin is a suitable denture base material for patients with clinical fracture of the acrylic denture.

  6. Positron annihilation study of acryl amide/poly (metha acrylic acid) membrane

    Science.gov (United States)

    Abdel-Hady, E. E.; Abdel-Hamed, M. O.; Eltoony, M. M.; Hammam, A. M.; Elsharkawy, M. R. M.

    2011-01-01

    Gamma irradiation posses a serious role for casting the membranes. Acryl amide /poly (methacrylic acid) membrane was synthesized under γ-radiation effect. The structure of the membrane was characterized by FTIR, thermo-gravimetric analysis and the scanning electron microscope. The properties of the membranes were also investigated in terms of proton conductivity and positron annihilation lifetime (PAL) parameters. On the basis of the values of the long-lived components in the lifetime spectra, the size of the free volume and their intensity were calculated. The positron lifetime study on these irradiated casted membranes shows that the cross-linking and degradation within the membrane matrix affect the free volume content and hence the microstructure.

  7. Ultrasonic velocities, densities, and excess molar volumes of binary mixtures of N,N-dimethyl formamide with methyl acrylate, or ethyl acrylate, or butyl acrylate, or 2-ethyl hexyl acrylate at T = 308.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Kondaiah, M. [Department of Physics, Acharya Nagarjuna University, Nagarjuna Nagar 522510, Andhra Pradesh (India); Sravana Kumar, D. [Dr. V.S. Krishna Govt. Degree College, Visakhapatnam, Andhra Pradesh (India); Sreekanth, K. [Department of Physics, Acharya Nagarjuna University, Nagarjuna Nagar 522510, Andhra Pradesh (India); Krishna Rao, D., E-mail: krdhanekula@yahoo.co.in [Department of Physics, Acharya Nagarjuna University, Nagarjuna Nagar 522510, Andhra Pradesh (India)

    2011-12-15

    Highlights: > Positive values of V{sub m}{sup E}, indicate dispersion forces between acrylic esters and DMF. > V{sub m}{sup E} values compared with Redlich-Kister polynomial. > Partial molar volumes data conclude that weak interactions exist in the systems. > Measured velocity values compared with theoretical values obtained by polynomials. - Abstract: Ultrasonic velocities, u, densities, {rho}, of binary mixtures of N,N-dimethyl formamide (DMF) with methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), and 2-ethyl hexyl acrylate (EHA), including pure liquids, over the entire composition range have been measured at T = 308.15 K. Using the experimental results, the excess molar volume, V{sub m}{sup E}, partial molar volumes, V-bar {sub m,1}, V-bar{sub m,2}, and excess partial molar volumes, V-bar{sub m,1}{sup E}, V-bar{sub m,2}{sup E} have been calculated. Molecular interactions in the systems have been studied in the light of variation of excess values of calculated properties. The excess properties have been fitted to Redlich-Kister type polynomial and the corresponding standard deviations have been calculated. The positive values of V{sub m}{sup E} indicate the presence of dispersion forces between the DMF and acrylic ester molecules. Further theoretical values of sound velocity in the mixtures have been evaluated using various theories and have been compared with experimental sound velocities to verify the applicability of such theories to the systems studied. Theoretical ultrasonic velocity data have been used to study molecular interactions in the binary systems investigated.

  8. Evaluation of Cellular Toxicity of Three Denture Base Acrylic Resins

    OpenAIRE

    Ebrahimi Saravi, M.; M. Vojdani; Bahrani, F

    2012-01-01

    Objective This study aimed to evaluate the cellular toxicity of two newly-released acrylic resins (Futura Gen and GC Reline Hard) in comparison with the conventional heat-cure resin (Meliodent). Materials and Methods: Sample discs from each acrylic resin were placed in 24-well culture plates along with L929 mouse fibroblast cell line. A mixture of the RPMI 1640 medium, antibiotics and 10% FBS was added to the plates and the specimens were incubated in a CO2 incubator. The amount of light abso...

  9. STUDY ON ACRYLAMIDE-SODIUM ACRYLATE COPOLYMER GELS

    Institute of Scientific and Technical Information of China (English)

    ZHOU Maotang; LI Qian; XU Jiping

    1990-01-01

    Acrylamide-sodium acrylate copolymer hydrogels have been obtained by radiation techniques.Two different methods have been used to introduce -COONa groups into polymer chains of the gels: (1) by partial hydrolysis of acrylamide homopolymer gel; (2) by direct copolymerization and crosslinking of acrylamide and sodium acrylate in aqueous solutions. It was found that the gels obtained in different ways had different properties, the swelling character of the gels obtained by partial hydrolysis were more sensitive to pH of swelling aqueous media. In order to explain these differences,13 C-NMR techniques were used to investigate the sequence distribution of monomer units of both gels.

  10. Triphenylphosphine-Catalyzed Michael Addition of Alcohols to Acrylic Compounds

    Institute of Scientific and Technical Information of China (English)

    LIU, Hai-Ling; JIANG, Huan-Feng; WANG, Yu-Gang

    2007-01-01

    A facile triphenylphosphine-catalyzed Michael addition of alcohols to acrylic compounds was described. The reaction was carried out in open air at refluxing temperature in the presence of 10 mol% PPh3. Michael addition of saturated and unsaturated alcohols to acrylonitrile or acrylates has been examined. The reaction gaveβ-alkoxy derivatives with isolated yields of 5%-79%. PPh3 is cheaper and more stable than those trialkylphosphines previously used for the similar reactions, and the products can be easily separated from the reaction mixture via distillation.

  11. Comparison of classical dermatoscopy and acrylic globe magnifier dermatoscopy

    DEFF Research Database (Denmark)

    Lorentzen, Henrik F; Eefsen, Rikke Løvendahl; Weismann, Kaare

    2008-01-01

    Dermatoscopic asymmetry of melanocytic skin lesion is pivotal in most algorithms assessing the probability of melanoma. Larger lesions cannot be assessed by dermatoscopy and the Dermaphot in a single field of vision, but this can be performed using the acrylic globe magnifier. We examined......% confidence interval 83-97%). Sensitivity for melanoma, benign melanocytic naevi and basal cell carcinoma was 100%, 98% and 85%, respectively. Specificity was 95%, 94% and 100% for melanoma, naevi and basal cell carcinoma. Acrylic globe dermatoscopy enables a diagnostic accuracy similar to epiluminescence...

  12. The creep behavior of acrylic denture base resins.

    Science.gov (United States)

    Sadiku, E R; Biotidara, F O

    1996-01-01

    The creep behavior of acrylic dental base resins, at room temperature and at different loading conditions, has been examined. The behaviors of these resins are similar to that of "commercial perspex" at room temperature over a period of 1000 seconds. The pseudo-elastic moduli of the blends of PMMA VC show a significant increase compared with PMMA alone. The addition of the PVC powder to the heat-cured acrylic resin increased the time-dependent elastic modulus. This increase in elastic modulus is advantageous in the production of denture based resins of improv mechanical properties.

  13. The effect of acrylic resin functionality on the curing process and properties of acrylic-hexamethoxymethylmelamine coatings

    Directory of Open Access Journals (Sweden)

    Prendžov Slobodan J.

    2002-01-01

    Full Text Available In this paper the effect of the functionality of synthesized thermosetting acrylic resins (with hydroxy and carboxy groups and the cure temperature on the process of crosslinking and properties of the coatings was investigated. Methylated melamine resin, characterized by 1H and C NMR was used as the crosslinking agent. The degree of crosslinking was studied by infrared spectroscopy by determining the conversion of functional groups and the sol fraction. On the basis of the results obtained it was found that compositions with lower functionality of the acrylic resin had a higher conversion of functional groups, during which cocondensation reactions occurred (acrylic melamine crosslinks in a wide temperature crosslinking range. Consequently better control of the coating properties was achieved. The degree of crosslinking was in good correlation to the sol fraction content and the resin hardness.

  14. 40 CFR 721.10192 - Amides, coco, N-[3-(dibutylamino)propyl], acrylates.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Amides, coco, N- , acrylates. 721... Substances § 721.10192 Amides, coco, N- , acrylates. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as amides, coco, N- , acrylates (PMN...

  15. CROSS-REACTION PATTERNS IN GUINEA-PIGS SENSITIZED TO ACRYLIC-MONOMERS

    DEFF Research Database (Denmark)

    Clemmensen, S.

    1984-01-01

    The cross-reaction patterns of selected acrylate and methacrylate esters were investigated using the guinea pig maximization test. Methacrylates were less potent sensitizers than acrylates. Cross-sensitization was found between (meth)acrylates with closely related core structures, most extensively...

  16. 40 CFR 721.9640 - Salt of an acrylic acid - acrylamide terpolymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Salt of an acrylic acid - acrylamide... Specific Chemical Substances § 721.9640 Salt of an acrylic acid - acrylamide terpolymer (generic). (a... generically as salt of an acrylic acid - acrylamide terpolymer (PMN P-99-817) is subject to reporting under...

  17. 40 CFR 180.1162 - Acrylate polymers and copolymers; exemption from the requirement of a tolerance.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Acrylate polymers and copolymers... RESIDUES IN FOOD Exemptions From Tolerances § 180.1162 Acrylate polymers and copolymers; exemption from the requirement of a tolerance. (a) Acrylate polymers and copolymers are exempt from the requirement of...

  18. Effects of Novel Structure Bonding Materials on Properties of Aeronautical Acrylic

    Directory of Open Access Journals (Sweden)

    LI Zhisheng

    2017-06-01

    Full Text Available Novel structure bonding materials, J-351 epoxy adhesive film with low curing temperature and liquid modified acrylate SY-50s adhesive were chosen and characterized. The effects of adhesives on the mechanical properties of acrylic were studied. The results reveal that both adhesives have excellent bonding properties to acrylic. The stress-solvent crazing value of J-351 is higher than that of SY-50s. With the application of adhesive on the surface, mechanical properties of acrylic are declined. Casting acrylic shows more drastic decline than that of oriented acrylic. Through the characterization of fracture surface, we find that fracture of tensile sample derives from the side with adhesive. Mechanical properties of acrylic are more sensitive to SY-50s, because the liquid adhesive presents integrate bonding interface with acrylic. The interface between J-351 and acrylic is clear, making acrylic insensitive to J-351 film. Edge attachment strength of samples bonded with J-351 are higher than that of samples bonded with SY-50s due to the effects of adhesives on acrylic. J-351 epoxy adhesive film presents preferable application performance in the structure bonding of aeronautical acrylic.

  19. Tensile bond strength between auto-polymerized acrylic resin and acrylic denture teeth treated with MF-MA solution

    Science.gov (United States)

    2016-01-01

    PURPOSE This study evaluated the effect of chemical surface treatment using methyl formate-methyl acetate (MF-MA) solution on the tensile bond strength between acrylic denture teeth and auto-polymerized acrylic resin. MATERIALS AND METHODS Seventy maxillary central incisor acrylic denture teeth for each of three different brands (Yamahachi New Ace; Major Dent; Cosmo HXL) were embedded with incisal edge downwards in auto-polymerized resin in polyethylene pipes and ground with silicone carbide paper on their ridge lap surfaces. The teeth of each brand were divided into seven groups (n=10): no surface treatment (control group), MF-MA solution at a ratio of 25:75 (v/v) for 15 seconds, 30 seconds, 60 seconds, 120 seconds, 180 seconds, and MMA for 180 seconds. Auto-polymerized acrylic resin (Unifast Trad) was applied to the ground surface and polymerized in a pressure cooker. A tensile strength test was performed with a universal testing machine. Statistical analysis of the results was performed using two-way analysis of variance (ANOVA) and post-hoc Dunnett T3 test (α=.05). RESULTS The surface treatment groups had significantly higher mean tensile bond strengths compared with the control group (P.05), except for the Yamahachi New Ace MF-MA 180-second group (P<.05). CONCLUSION 15-second MF-MA solution can be an alternative chemical surface treatment for repairing a denture base and rebonding acrylic denture teeth with auto-polymerized acrylic resin, for both conventional and cross-linked teeth. PMID:27555897

  20. 腈纶基牛奶纤维与腈纶纤维性能比较%Comparison of the performance of acrylic milk fiber and acrylic fiber

    Institute of Scientific and Technical Information of China (English)

    耿琴玉; 吴佩云

    2012-01-01

    为了比较腈纶基牛奶纤维与腈纶纤维的基本性能,对腈纶基牛奶纤维的表观形态、力学性能、摩擦性能、卷曲弹性等进行了试验.结果表明,腈纶基牛奶纤维的纵向形态有隐条纹和不规则斑点,截面近似圆形并有明显的海岛状凹凸结构和细微孔隙;红外吸收光谱具有羊毛纤维典型的酰胺吸收谱带和腈纶纤维丙烯腈特征谱带;回潮率为4.34%,干、湿态下的断裂强度是腈纶纤维的67%~69%,断裂伸长率是腈纶纤维的1.26~1.27倍;干、湿态初始模量小于腈纶纤维;静、动态摩擦因数也小于腈纶纤维,而卷曲弹性回复率和残留卷曲率均大于腈纶纤维.%In order to compare the basic performance of acrylic milk fiber and acrylic fiber, surface morphology, mechanical properties, friction properties and crimp elasticity of acrylic milk fiber were tested. The results showed that the longitudinal morphology of acrylic milk fiber had hidden stripe and irregular spots, and the section of acrylic milk fiber was nearly circular and had obvious insular concave-convex structure and fine pores. The infrared absorption spectroscopy of acrylic milk fiber had typical amide absorption bands of wool fiber and acrylonitrile absorption bands of acrylic fiber. Moisture regain of acrylic milk fiber was 4.34%, the dry and wet breaking strength of acrylic milk fiber was 67%-69% of acrylic fiber; the elongation of acrylic milk fiber was 1.26-1.27 times of acrylic fiber. Dry and wet initial modulus of acrylic milk fiber were less than those of acrylic fiber. Static and dynamic friction factor of acrylic milk fiber were less than those of acrylic fiber, and the crimp recovery rate and residual crimp rate were larger than acrylic fiber.

  1. Lipase-Catalyzed Aza-Michael Reaction on Acrylate Derivatives

    NARCIS (Netherlands)

    Steunenberg, P.; Sijm, M.; Zuilhof, H.; Sanders, J.P.M.; Scott, E.L.; Franssen, M.C.R.

    2013-01-01

    A methodology has been developed for an efficient and selective lipase-catalyzed aza-Michael reaction of various amines (primary and secondary) with a series of acrylates and alkylacrylates. Reaction parameters were tuned, and under the optimal conditions it was found that Pseudomonas stutzeri lipas

  2. Synthesis and Reactivity of Aluminized Fluorinated Acrylic (AIFA) Nanocomposites (Postprint)

    Science.gov (United States)

    2012-06-18

    REACTIVITY OF ALUMINIZED FLUORINATED ACRYLIC (ALFA) NANOCOMPOSITES (POSTPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...the nano Al throughout the material, the composite was compounded for 3 min in a DACA Instruments benchtop twin screw extruder at 150 C. The com

  3. Decarboxylation-based traceless linking with aroyl acrylic acids

    DEFF Research Database (Denmark)

    Nielsen, John

    1998-01-01

    beta-Keto carboxylic acids are known to decarboxylate readily. In our pursuit to synthesize beta-indolinyl propiophenones, we have exploited this chemistry as a mean of establishing a traceless handle. 2-Aroyl acrylic acids have been esterified to a trityl resin, after which Michael-type addition...

  4. Oil-acrylic hybrid latexes as binders for waterborne coatings

    NARCIS (Netherlands)

    Hamersveld, van E.M.S.; Es, van J.; German, A.L.; Cuperus, F.P.; Weissenborn, P.; Hellgren, A.C.

    1999-01-01

    The combination of the characteristics of oil, or alkyd, emulsions and acrylic latexes in a waterborne binder has been the object of various studies in the past. Strategies for combining the positive properties of alkyds, e.g. autoxidative curing, gloss and penetration in wood, with the fast drying

  5. Lightweight bonded acrylic facing at the Vitra VSL Factory

    NARCIS (Netherlands)

    Michel, M.T.; Techen, H.

    2013-01-01

    Acrylic glass is omnipresent in the industrialised world; but as a building material most architects, facade planners and engineers are still unfamiliar with this material. In most cases it is applied as a substitute for glass which leads to inappropriate joints and fixtures. During the years of the

  6. SYNTHESIS OF ACRYLIC ESTERS IN PTC: KINETICS AND ECOLOGICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    G.Torosyan

    2013-06-01

    Full Text Available The synthesis of esters of acrylic acids, which are applied for synthesis of polymeric materials by phase transfer catalysis were discussed (PTC, which is very useful for reduction of reaction consumption of materials and power.This method has substantial advantages including high speed of the process, soft condition of reaction and reduced pollution.

  7. Acrylic acid and electric power cogeneration in an SOFC reactor.

    Science.gov (United States)

    Ji, Baofeng; Wang, Jibo; Chu, Wenling; Yang, Weishen; Lin, Liwu

    2009-04-21

    A highly efficient catalyst, MoV(0.3)Te(0.17)Nb(0.12)O, used for acrylic acid (AA) production from propane, was used as an anodic catalyst in an SOFC reactor, from which AA and electric power were cogenerated at 400-450 degrees C.

  8. Design and Synthesis of Novel Fluorine-containing Acrylates

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A series of novel fluorine-containing acrylates 6a-6g were synthesized via the condensation of ethyl cyanoacetate and trifluoroacetic anhydride, followed by chloridization and the coupling reaction with amines. These new compounds exhibited some biological activity as preliminary bioassay indicated. A plausible reaction mechanism was outlined and discussed.

  9. Microstructure and properties of styrene acrylate polymer cement concrete

    NARCIS (Netherlands)

    Zhao Su

    1995-01-01

    The paper systematically describes the evolution of the microstructure of a styrene acrylate polymer cement concrete in relation to its mechanical properties and durability. The results presented and discussed at the present paper involve the interaction of the polymer dispersion with portland cemen

  10. 21 CFR 173.5 - Acrylate-acrylamide resins.

    Science.gov (United States)

    2010-04-01

    ... additive consists of one of the following: (1) Acrylamide-acrylic acid resin (hydrolyzed polyacrylamide) is... or cane sugar juice and liquor or corn starch hydrolyzate in an amount not to exceed 5 parts per million by weight of the juice or 10 parts per million by weight of the liquor or the corn...

  11. Sensitization capacity of acrylated prepolymers in ultraviolet curing inks tested in the guinea pig.

    Science.gov (United States)

    Björkner, B

    1981-01-01

    One commonly used prepolymer in ultraviolet (UV) curing inks is epoxy acrylate. Of 6 men with dermatitis contracted from UV-curing inks, 2 had positive patch test reaction to epoxy acrylate. None reacted to the chemically related bisphenol A dimethacrylate. The sensitization capacity of epoxy acrylate and bisphenol A dimethacrylate performed with the "Guinea pig maximization test" (GPM) shows epoxy acrylate to be an extreme sensitizer and bisphenol A dimethacrylate a moderate sensitizer. Cross-reaction between the two substances occurs. The epoxy resin oligomer MW 340 present in the epoxy acrylate also sensitized some animals.

  12. Nanopigmented Acrylic Resin Cured Indistinctively by Water Bath or Microwave Energy for Dentures

    Directory of Open Access Journals (Sweden)

    L. S. Acosta-Torres

    2014-01-01

    Full Text Available The highlight of this study was the synthesis of nanopigmented poly(methyl methacrylate nanoparticles that were further processed using a water bath and/or microwave energy for dentures. The experimental acrylic resins were physicochemically characterized, and the adherence of Candida albicans and biocompatibility were assessed. A nanopigmented acrylic resin cured by a water bath or by microwave energy was obtained. The acrylic specimens possess similar properties to commercial acrylic resins, but the transverse strength and porosity were slightly improved. The acrylic resins cured with microwave energy exhibited reduced C. albicans adherence. These results demonstrate an improved noncytotoxic material for the manufacturing of denture bases in dentistry.

  13. Effects of composition and layer thickness of a butyl acrylate/acrylic acid copolymer on the adhesion properties

    Energy Technology Data Exchange (ETDEWEB)

    Ghim, Deoukchen; Kim, Jung Hyeun [University of Seoul, Seoul (Korea, Republic of)

    2016-02-15

    Acrylic pressure-sensitive adhesives are synthesized by solution copolymerization using n-butyl acrylate and acrylic acid (AA) in ethyl acetate anhydrous. The copolymer composition is controlled for good adhesive properties by varying AA content. The monomer conversion is measured by the gravimetric method and FTIR technique. The adhesive layer thickness is measured by scanning electron microscopy, and the adhesive properties are evaluated with loop tack, 180 .deg. peel, and holding time measurements. The peel force increases with increasing the AA content up to 3 wt% and decreases at the AA content higher than 3 wt%, but the tack force decreases with increasing the AA content. The holding time increases with increasing the AA content, and it shows a similar trend with the T{sub g} of adhesives. The increase of layer thickness improves tack and peel forces, but it weakens the holding power. A tape thickness of about 20 μm shows well-balanced properties at 3 wt% AA content in the acrylic copolymer system.

  14. 硬性透气性角膜接触镜矫正复杂性无晶状体眼疗效观察%The clinical effects of ridid gas permeable contact lens (RGP) on complicated aphakic eyes

    Institute of Scientific and Technical Information of China (English)

    唐莉; 刘陇黔; 廖咏川; 周茂玉; 马薇

    2005-01-01

    目的:探讨硬性透气性角膜接触镜(rigid gaspermeab1e contactlens,RGP)矫正复杂的无晶状体眼的效果和安全性.方法:2002-07/2005-06合并眼部其他异常的复杂的无晶状体眼病例22例23眼在本院采用验配RGP作视力矫正.结果:所有患者均一次验配成功.配戴RGP的矫正视力明显好于框架眼镜矫正视力,视力稳定.除1例诉复视外,21例患者无双眼视障碍的症状,无严重并发症发生.结论:RGP矫正复杂的无晶状体眼是安全有效的.

  15. Study on Tough Blends of Polylactide and Acrylic Impact Modifier

    Directory of Open Access Journals (Sweden)

    Xiaoli Song

    2014-02-01

    Full Text Available Acrylic impact modifiers (ACRs with different soft/hard monomer ratios (mass ratios were prepared by semi-continuous seed emulsion copolymerization using the soft monomer butyl acrylate and the hard monomer methyl methacrylate, which were used to toughen polylactide (PLA. The effect of soft/hard ACR monomer ratio on the mechanical properties of PLA/ACR blends was investigated. The results showed that the impact strength and the elongation at break of PLA/ACR blends increased with increasing soft/hard ACR monomer ratio, while the tensile and flexural strengths of PLA had little change. The impact strength of PLA/ACR blends could be increased about 4 times more than that of pure PLA when the soft/hard monomer ratio of ACR was 90/10, which was the optimal ratio for good mechanical properties of PLA. Additionally, the possible mechanism of ACR toughening in PLA was discussed through impact fracture phase morphology analysis.

  16. Plant oil-based shape memory polymer using acrylic monolith

    Directory of Open Access Journals (Sweden)

    T. Tsujimoto

    2015-09-01

    Full Text Available This article deals with the synthesis of a plant oil-based material using acrylic monolith. An acrylic monolith bearing oxirane groups was prepared via simple technique that involved the dissolution of poly(glycidyl methacrylate-comethyl methacrylate (PGMA in ethanolic – aqueous solution by heating and subsequent cooling. The PGMA monolith had topologically porous structure, which was attributed to the phase separation of the polymer solution. The PGMA monolith was impregnated by epoxidized soybean oil (ESO containing thermally-latent catalyst, and the subsequent curing produced a crosslinked material with relatively good transparency. The Young’s modulus and the tensile strength of polyESO/PGMA increased compared with the ESO homopolymer. The strain at break of polyESO/PGMA was larger than that of the ESO homopolymer and crosslinked PGMA. Furthermore, polyESO/PGMA exhibited good shape memory-recovery behavior.

  17. Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

    Institute of Scientific and Technical Information of China (English)

    Li Hua LIU; Zhi Qiang LIU; Zhu Qing GONG

    2006-01-01

    The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.

  18. Polymerization of acrylic acid using atmospheric pressure DBD plasma jet

    Science.gov (United States)

    Bashir, M.; Bashir, S.

    2016-08-01

    In this paper polymerization of acrylic acid was performed using non thermal atmospheric pressure plasma jet technology. The goal of this study is to deposit organic functional coatings for biomedical applications using a low cost and rapid growth rate plasma jet technique. The monomer solution of acrylic acid was vaporized and then fed into the argon plasma for coating. The discharge was powered using a laboratory made power supply operating with sinusoidal voltage signals at a frequency of 10 kHz. The optical emission spectra were collected in order to get insight into the plasma chemistry during deposition process. The coatings were characterized using Fourier transform infrared spectroscopy, atomic force microscopy and growth rates analysis. A high retention of carboxylic functional groups of the monomer was observed at the surface deposited using this low power technique.

  19. Stronger multilayer acrylic dielectric elastomer actuators with silicone gel coatings

    Science.gov (United States)

    Lau, Gih-Keong; La, Thanh-Giang; Sheng-Wei Foong, Ervin; Shrestha, Milan

    2016-12-01

    Multilayer dielectric elastomer actuators (DEA) perform worst off than single-layer DEAs due to higher susceptibility to electro-thermal breakdown. This paper presents a hot-spot model to predict the electro-thermal breakdown field of DEAs and its dependence on thermal insulation. To inhibit the electrothermal breakdown, silicone gel coating was applied as barrier coating to multilayer acrylic DEA. The gel coating helps suppress the electro-thermally induced puncturing of DEA membrane at the hot spot. As a result, the gel-coated DEAs, in either a single layer or a multilayer stack, can produce 30% more isometric stress change as compared to those none-coated. These gel-coated acrylic DEAs show great potential to make stronger artificial muscles.

  20. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    Directory of Open Access Journals (Sweden)

    Ladan Espandar

    2011-01-01

    Full Text Available Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular lens (IOL. The hydrophilic design of the lens is optimized to address dysphotopsia while maintaining biocompatibility, optical clarity, resistance to damage, and resistance to biocontamination. Aspheric lenses decrease postoperative spherical aberration. The addition of the Softec lens provides clinicians with another option for IOL placement; however, randomized comparative studies of this lens to others already on the market remain to be completed.Keywords: hydrophilic acrylic intraocular lens, Softec HD intraocular lens, aspheric intraocular lens, IOL

  1. Rheological behavior of acrylic paint blends based on polyaniline

    Directory of Open Access Journals (Sweden)

    Alex da Silva Sirqueira

    Full Text Available Abstract The rheological properties of acrylic paints and polyaniline (PAni blends, with different contents of PAni doped by dodecyl benzene sulphonic acid (DBSA and, dispersed by mechanical stirrer and ultrasonic, were investigated by controlled shear rate testing ramps. The results showed that the commercial acrylic paint had tended to deliver the required stability on the blends, in order to avoid sedimentation process. All samples exhibited non-Newtonian flow behavior (shear thinning, increasing PAni content the flow behavior index (n decreased (0.41 to 0.11 and power law model were used to fitted the experimental curves. The results showed that the addition of PAni-DBSA affects the viscoelastic behavior of the mixtures due to the interactions between the components in the mixture. The best properties were obtained for samples 90/10 wt % dispersed by ultrasonic, indicating the feasibility of the usage as a conducting paint.

  2. Characterization of methacrylated alginate and acrylic monomers as versatile SAPs.

    Science.gov (United States)

    Mignon, Arn; Vermeulen, Jolien; Graulus, Geert-Jan; Martins, José; Dubruel, Peter; De Belie, Nele; Van Vlierberghe, Sandra

    2017-07-15

    Superabsorbent polymers (SAPs) based on polysaccharides, especially alginate, could offer a valuable solution in a plethora of applications going from drug delivery to self-healing concrete. This has already been proven with both calcium alginate and methacrylated alginate combined with acrylic acid. In this manuscript, the effect of varying the degree of methacrylation and use of a combination of acrylic acid and acrylamide is investigated to explore the effects on the relevant SAP characteristics. The materials showed high gel fractions and a strong swelling capacity up to 630gwater/gSAP, especially for superabsorbent polymers with a low degree of substitution. The SAPs also showed only a limited hydrolysis in aqueous and cement filtrate solutions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Insights on the biodegradation of acrylic reline resins

    OpenAIRE

    Neves, Maria Cristina Bettencourt, 1976-

    2012-01-01

    Tese de doutoramento, Medicina Dentária (Reabilitação Oral), Universidade de Lisboa, Faculdade de Medicina Dentária, 2012 Acrylic reline resins are extensively used in dentistry, since they readapt dentures to the continuous reabsorbed underlying tissues. Since present in the oral cavity for long periods of time, these materials are objective of the biodegradation phenomena, which represents the change on their chemical, physical and mechanical properties due to the oral environment condit...

  4. Late opacification of a hydrophilic acrylic intraocular lens

    Directory of Open Access Journals (Sweden)

    Al-Bdour Muawyah

    2008-01-01

    Full Text Available Cataract extraction and intraocular lens implantation is considered to be a safe procedure in most cases. However, the new advances in the surgical technique namely phacoemulsification and hence the increased use of foldable intraocular lenses have given rise to new complications including late opacification of intraocular lenses. In this case we report late opacification of a foldable hydrophilic acrylic intraocular lens and the surgical technique for its exchange.

  5. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    OpenAIRE

    Ladan Espandar; Shameema Sikder; Majid Moshirfar

    2011-01-01

    Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular le...

  6. Hemocompatibility of Chitosan/poly(acrylic acid) Grafted Polyurethane Tubing

    OpenAIRE

    Lee, Hyun-Su; Tomczyk, Nancy; Kandel, Judith; Composto, Russell J.; Eckmann, David M.

    2013-01-01

    The activation and adhesion of platelets or whole blood exposed to chitosan (CH) grafted surfaces is used to evaluate the hemocompatibility of biomaterials. The biomaterial surfaces are polyurethane (PU) tubes grafted with an inner poly(acrylic acid) (PAA) and an outer CH or quaternary ammonium modified CH (CH-Q) brush. The CH, CH-Q and PAA grafted layers were characterized by ellipsometry and fluorescence microscopy. Material wear tests demonstrate that CH (CH-Q) is stably grafted onto PU tu...

  7. Electrical Properties of n-Butyl Acrylate-Grafted Polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.R.; Oh, W.J.; Suh, K.S. [Korea University (Korea, Republic of)

    1997-04-01

    The electrical properties of n-butyl acrylate-grafted polyethylene (PE-g-nBA) were investigated. In PE-g-nBA, hetero charge founded in LDPE slightly increased due to the nBA grafting. Conduction currents decreased with the increase of nBA graft ratio. AC breakdown strength increased and water treeing length decreased with the increase of graft ratio in PE-g-nBA. (author). 4 refs., 6 figs.

  8. Acrylic microspheres-based optosensor for visual detection of nitrite.

    Science.gov (United States)

    Noor, Nur Syarmim Mohamed; Tan, Ling Ling; Heng, Lee Yook; Chong, Kwok Feng; Tajuddin, Saiful Nizam

    2016-09-15

    A new optosensor for visual quantitation of nitrite (NO2(-)) ion has been fabricated by physically immobilizing Safranine O (SO) reagent onto a self-adhesive poly(n-butyl acrylate) [poly(nBA)] microspheres matrix, which was synthesized via facile microemulsion UV lithography technique. Evaluation and optimization of the optical NO2(-) ion sensor was performed with a fiber optic reflectance spectrophotometer. Scanning electron micrograph showed well-shaped and smooth spherical morphology of the poly(nBA) microspheres with a narrow particles size distribution from 0.6 μm up to 1.8 μm. The uniform size distribution of the acrylic microspheres promoted homogeneity of the immobilized SO reagent molecules on the microspheres' surfaces, thereby enhanced the sensing response reproducibility (<5% RSD) with a linear range obtained from 10 to 100 ppm NO2(-) ion. The micro-sized acrylic immobilization matrix demonstrated no significant barrier for diffusion of reactant and product, and served as a good solid state ion transport medium for reflectometric nitrite determination in food samples.

  9. Synthesis and properties of acrylic copolymers for ocular implants

    Science.gov (United States)

    Reboul, Adam C.

    There is a need for flexible polymers with higher refractive index and extended UV absorbing properties for improved intraocular lenses (IOLs). This research was devoted to the synthesis of new acrylic copolymers for foldable IOLs and to studies concerning IOL polymer properties. New polymers were synthesized from phenylated acrylates copolymerized with N-vinyl carbazole derivatives using bulk free radical addition methods. The copolymers had low Tg values, high refractive index, and were flexible. The N-vinyl carbazole derivatives were characterized by NMR and copolymers were characterized by DSC, UV-Vis, and refractometry. New phenothiazine based UV absorbers with high extinction coefficients were also synthesized for incorporation into ocular materials. Patent disclosures on UV absorbers and high refractive index polymers were prepared. A so called "glistening" phenomenon that occurs in all foldable intraocular lenses currently in clinical use is poorly understood and was studied. Research on this microvoid forming behavior included studies and development of methods to inhibit glistening in low Tg acrylic based copolymers. Glistenings were characterized using SEM and optical microscopy. A novel technique for inhibiting glistening was found and a patent disclosure was prepared.

  10. Slow- Release Fertilizer Formulation Using Acrylic and Chitosan Coating

    Directory of Open Access Journals (Sweden)

    Lili Handayani

    2015-01-01

    Full Text Available The low-efficiency problem in fertilizer application can be overcome by controlling fertilizer solubility, i.e. by rendering the fertilizer to be released gradually; such material is also known as slow-release fertilizer (SRF. This research was aimed to formulate SRF by coating technique using acrylic and chitosan as the coating material, and to evaluate fertilizer resistance to too fast disintegration, and rate of nutrient release method. The results demonstrated that fertilizer formulation containing N, P, K, Fe, Cu, and Zn with granulation technique yielded 74% of granules with 2-5 mm in diameter. The SRFs (formulated fertilizer with acrylic or chitosan coating were more resistant to water pounding than non-SRF. Furthermore, shaking test with distilled water or 2% citric acid, or by percolation test with distilled water showed that the SRFs had lower nutrient solubility than the non-SRFs. The results of shaking test also specifically indicated that coating with acrylic made the fertilizer more resistant to the citric acid,suggesting that this coating material would be more suitable in acidic soils. The SRFs formulated with the addition of chitosan during blending of micronutrients prior to mixing with macronutrients, granulation, and final coating exhibited lower nutrient solubility than the SRFs without the pre-coating chitosan addition.

  11. Acrylate Functionalized Tetraalkylammonium Salts with Ionic Liquid Properties

    Directory of Open Access Journals (Sweden)

    Silvia Janietz

    2012-05-01

    Full Text Available Acrylate functionalized ionic liquids based on tetraalkylammonium salts with terminal acrylates- and methylacrylates were synthesized. Melting points and ionic conductivity of twenty compounds in six groups were determined. Within one group the effect of three different counterions was investigated and discussed. The groups differ in cationic structure elements because of their functional groups such as acrylate and methacrylate, alkyl residues at the nitrogen and number of quaternary ammonium atoms within the organic cation. The effect of these cationic structure elements has been examined concerning the compiled parameters with a view to qualifying them as components for solid state electrolytes. The newly synthesized ionic liquids were characterized by NMR and FTIR analysis. The exchange of halide ions like bromide as counter ions to weakly coordinating [PF6], [OTf] or [TFSI] reduces the melting points significantly and leads to an ion conductivity of about 10−4 S/cm at room temperature. In the case of the dicationic ionic liquid, an ion conductivity of about 10−3 S/cm was observed.

  12. Epoxy-acrylic core-shell particles by seeded emulsion polymerization.

    Science.gov (United States)

    Chen, Liang; Hong, Liang; Lin, Jui-Ching; Meyers, Greg; Harris, Joseph; Radler, Michael

    2016-07-01

    We developed a novel method for synthesizing epoxy-acrylic hybrid latexes. We first prepared an aqueous dispersion of high molecular weight solid epoxy prepolymers using a mechanical dispersion process at elevated temperatures, and we subsequently used the epoxy dispersion as a seed in the emulsion polymerization of acrylic monomers comprising methyl methacrylate (MMA) and methacrylic acid (MAA). Advanced analytical techniques, such as scanning transmission X-ray microscopy (STXM) and peak force tapping atomic force microscopy (PFT-AFM), have elucidated a unique core-shell morphology of the epoxy-acrylic hybrid particles. Moreover, the formation of the core-shell morphology in the seeded emulsion polymerization process is primarily attributed to kinetic trapping of the acrylic phase at the exterior of the epoxy particles. By this new method, we are able to design the epoxy and acrylic polymers in two separate steps, and we can potentially synthesize epoxy-acrylic hybrid latexes with a broad range of compositions.

  13. PREPARATION AND PROPERTIES OF THERMOSETTING ACRYLIC COATINGS USING TITANIUM-OXO-CLUSTER AS A CURING AGENT

    Institute of Scientific and Technical Information of China (English)

    Kun Xu; Shu-xue Zhou; Li-min Wu

    2009-01-01

    Thermosetting acrylic coatings were prepared by using carboxyl acid group-containing acrylic oligomer and curing with titanium-oxo-clusters which were first pre-hydrolyzed from titanium n-butoxide. The curing ability of the titanium-oxo-cluster was examined using a microdielectric analytical (DEA) curing monitor, Fourier transformed infrared spectroscopy (FTIR), and Soxhlet extraction experiments, and the properties of the resulted coatings were investigated with pendulum hardness tester, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA) and ultraviolet-visible spectrometer. The effect of titania-oxo-cluster in leading acrylic oligomers to form thermosetting acrylic coatings was confirmed. An increasing pendulum hardness and modulus of acrylic coatings with increasing titania content was observed, which resulted from the increment of crosslinking degree rather than of the titania content. The thermosetting acrylic/titania coatings also showed better thermal stability and higher UV-blocking properties than those coatings using organic curing agent.

  14. Waterborne hyperbranched alkyd-acrylic resin obtained by mini emulsion polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Murillo, Edwin, E-mail: edwinalbertomurillo@gmail.com [Grupo de Investigacion en Materiales Polimericos (GIMAPOL), Universidad Francisco de Paula Santander, San Jose de Cucuta (Colombia); Lopez, Betty [Grupo de Investigacion en Ciencia de los Materiales, Universidad de Antioquia, Calle, Medellin (Colombia)

    2016-10-15

    Four waterborne hyper branched alkyd-acrylic resins (HBRAA) were synthesized by mini emulsion polymerization from a hyper branched alkyd resin (HBR), methyl methacrylate (MMA), butyl acrylate (BA) and acrylic acid (AA), by using benzoyl peroxide (BPO) and ammonium persulfate (AP) as initiators. The reaction between HBR and acrylic monomers was evidenced by differential scanning calorimetric (DSC), nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The conversion percentage, glass transition temperature (T{sub g}), content of acrylic polymer (determined by soxhlet extraction) and molecular weight increased with the content of acrylic monomers used in the synthesis. The main structure formed during the synthesis was the HBRAA. The analysis by dynamic light scattering (DLS) showed that the particle size distribution of HBRAA2, HBRAA3 and HBRAA4 resins were mainly mono modal. The film properties (gloss, flexibility, adhesion and drying time) of the HBRAA were good. (author)

  15. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    Energy Technology Data Exchange (ETDEWEB)

    Tajau, Rida; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang, Selangor (Malaysia); Ibrahim, Mohammad Izzat [Faculty of Science, University of Malaya (UM), 50603 Kuala Lumpur (Malaysia); Yunus, Nurulhuda Mohd [Faculty of Science and Technology, National University Malaysia (UKM), 43600 Bangi, Selangor (Malaysia)

    2014-02-12

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough.

  16. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    Science.gov (United States)

    Tajau, Rida; Ibrahim, Mohammad Izzat; Yunus, Nurulhuda Mohd; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik

    2014-02-01

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough.

  17. Color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for non metal clasp denture

    OpenAIRE

    Jang, Dae-Eun; Lee, Ji-Young; Jang, Hyun-Seon; Lee, Jang-Jae; Son, Mee-Kyoung

    2015-01-01

    PURPOSE The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study...

  18. Studies on the hydrolysis of biocompatible acrylic polymers having aspirin-moieties.

    Science.gov (United States)

    Gu, Z W; Li, F M; Feng, X D; Voong, S T

    1983-01-01

    Both the homogeneous and heterogeneous hydrolysis of five new acrylic polymers having aspirin-moieties, i.e. polymers of beta-(acetylsalicylyloxy)ethyl methacrylate, beta-(acetylsalicylyloxy) propyl methacrylate,beta-(acetylsalicylyloxy) ethyl acrylate, beta-hydroxy-gamma-(acetylsalicylyloxy) propyl methacrylate, beta-hydroxy-gamma-(acetylsalicylyloxy) propyl acrylate were investigated in acidic or alkaline medium at 30 degrees C or 60 degrees C, respectively. It was observed that the chief hydrolyzed product is always aspirin with minor amount of salicylic acid.

  19. Influence of Zwitterions on Thermomechanical Properties and Morphology of Acrylic Copolymers: Implications for Electroactive Applications

    Science.gov (United States)

    2011-09-30

    properties of ethyl acrylate and n-butyl acrylate ( nBA )-based sulfobetaine-containing copolymers.10,11 They found that the incorporation of...ammonio]-1-propanesulfonate (SBMA), a zwitterionic mono- mer. Copolymerization of both charge-containing monomers with nBA elucidates the influence of...3-[[2-(methacryloyloxy)ethyl]- (dimethyl)ammonio]-1-propanesulfonate (SBMA), was generously provided by Raschig GmbH. n-Butyl acrylate ( nBA , Alfa

  20. Preparation of Poly(acrylic acid) Hydrogel by Radiation Crosslinking and Its Application for Mucoadhesives

    OpenAIRE

    Young-Chang Nho; Jong-Seok Park; Youn-Mook Lim

    2014-01-01

    A mucoadhesive drug delivery system can improve the effectiveness of a drug by maintaining the drug concentration and allowing targeting and localization of the drug at a specific site. Acrylic-based hydrogels have been used extensively as a mucoadhesive system owing to their flexibility and excellent bioadhesion. In this experiment, poly(acrylic acid) was selected to prepare the bioadhesive hydrogel adhering to mucosal surfaces using a radiation process. Poly(acrylic acid) was dissolved in ...

  1. Effect of Atmospheric Pressure Glow Discharge Treatment on Polymerization of Acrylic Fabric and Its Printing Behavior

    Directory of Open Access Journals (Sweden)

    D M El-Zeer

    2014-03-01

    Full Text Available Acrylic fibers have been treated by atmospheric pressure glow discharge (APGD plasma in open air to enhance surface antistatic properties. The treated surfaces are investigated by scanning electron microscopy (SEM, Fourier-Transition Infrared Spectroscopy (FTIR and Atomic Force Microscope (AFM. Plasma treatment of acrylic fabric has been found to increase the surface roughness, modify the nature and density of surface functionalities, and drastically improve the wettability and antistatic ability of acrylic fibers.

  2. Scientific Opinion on the safety evaluation of the active substance, acrylic acid, sodium salt, co-polymer with acrylic acid, methyl ester, methacrylic acid, 2 hydroxypropylester, and acrylic acid cross-linked for use in active food contact materials

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF

    2013-04-01

    Full Text Available This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety evaluation of the acrylic acid, sodium salt, co-polymer with acrylic acid, methyl ester, methacrylic acid, 2 hydroxypropylester, and acrylic acid cross-linked (CAS No. 117675-55-5, FCM Substance No 1022, to be used as liquid absorber in the form of fibres in absorbent pads for the packaging of fresh or frozen meat, poultry, and fish as well as fresh fruits and vegetables. The Panel considered that migration is not expected when the absorption capacity of the pads is not exceeded. Therefore no exposure from the consumption of the packed food is expected. The Panel also considered that none of these starting substances and the cross-linked polymer gives rise to concern for genotoxicity. Therefore the CEF Panel concluded that the use of the substance acrylic acid, sodium salt, co-polymer with acrylic acid, methyl ester, methacrylic acid, 2 hydroxypropylester, and acrylic acid cross-linked does not raise a safety concern when used as fibres in absorber pads for the packaging of fresh or frozen meat, poultry, fish, fruits and vegetables under conditions under which the absorption capacity of the pads is not exceeded and mechanical release of the fibres from the pads is excluded.

  3. Poly(styrene-acrylic acid) magnetic polymer microspheres

    Institute of Scientific and Technical Information of China (English)

    Yanling CHENG; Liuqiang MA; Ruohui LI

    2008-01-01

    Magnetic polymer microspheres have been considered as a kind of new biopolymer materials with great advantages in bioseparation engineering and biome-dicine engineering because they have not only polymer functional groups but also magnetic characteristics. Styrene-acrylic acid copolymer (p(S-AA)) magnetic microspheres were synthesized by dispersion polymeriza-tion with Fe3O4 as core and p(S-AA) as shell. The micro-spheres were characterized by SEM, size analysis, molecular weight and solid content measurement. All of them indicate that the microspheres are small in size, nar-row in distribution, stable in chemistry and rich in func-tional groups on their surface.

  4. PREPARATION AND PROPERTIES OF SILICONE-ACRYLATE COPOLYMER LATEX

    Institute of Scientific and Technical Information of China (English)

    Mu-jie Yang; Wei Zhang

    2004-01-01

    Silicone-acrylate copolymer latex was prepared through three different polymerization processes, i.e., the batch process, preemulsified monomer addition and the monomer addition process. The results revealed that the monomer addition process is a desirable approach to produce narrow particle size distribution latex with higher polymerization conversion and less amount of coagulum. The effect of silicone content on the glossiness and water absorption of latex film was investigated and the results showed that the glossiness of latex film is improved up to a silicone content of 10% of total monomers, but becomes impaired thereafter, whereas water absorption is reduced accordingly.

  5. THE IMPORTANCE OF COAGULATION BATH IN ACRYLIC FIBER PRODUCTION

    Directory of Open Access Journals (Sweden)

    İsmail TİYEK

    2005-03-01

    Full Text Available In the production of acrylic fibers using wet-spinning method, fiber formation takes places in the coagulation bath. Therefore, physical properties of the fibers, produced by the wet-spinning method, is affected by coagulation bath conditions. For this reason, coagulation bath parameters have to be checked very well. In this paper, both the physical events such as diffusion and phase transition, occured in the coagulation bath, and some coagulation bath parameters that affect these physical events are studied. Furthermore, it is tried to express their affects on the physical characteristics of the fibers.

  6. Conformational Transition of Poly (Acrylic Acid) Detected by Microcantilever Sensing

    Institute of Scientific and Technical Information of China (English)

    LI Kai; LIU Hong; ZHANG Qing-Chuan; XUE Chang-Guo; WU Xiao-Ping

    2007-01-01

    Poly (acrylic acid) (PAA) chains are grafted on one side of a microcantilever by the self-assembled method and the deflections of the microcantilever are detected as a function of medium pH from 3 to 11. It is found that when the pH varies, the microcantilever deflects because of the changing surface stress. By analysing the electrostatic repulsive effect, the surface stress change is related to the conformation transition of PAA from a collapse state to a swelling state. This method offers the interaction information among the polymer chains during the conformational transition and affords an alternative way to study conformational change of polymers.

  7. Dimensional accuracy and stability of acrylic resin denture bases.

    Science.gov (United States)

    Huggett, R; Zissis, A; Harrison, A; Dennis, A

    1992-10-01

    Proponents of injection molding systems have claimed a number of benefits over conventional press-pack dough molding systems. The aim of this study was to evaluate a recently developed injection (dry heat) procedure of processing compared with press-pack dough molding utilizing three curing cycles. The dimensional accuracy and stability of acrylic resin bases produced by the two molding procedures were compared. Dimensional changes were assessed over a period of 4 months using an optical comparator. The results demonstrate that baseplates produced by the injection molding procedure exhibit less shrinkage than those produced by the conventional press-pack procedures.

  8. SYNTHESIS AND PROPERTIES OF POLYURETHANE ACRYLATE/EPOXY RESIN INTERPENETRATING POLYMER NETWORKS

    Institute of Scientific and Technical Information of China (English)

    SHI Youheng; NIE Xuzong

    1988-01-01

    In this paper, a series of interpenetrating polymer networks (IPNs) based on polyurethane acrylate and epoxy resin was prepared by simultaneous photoinitiating by both free-radical and cationic polymerization.The effects of the polyurethane acrylate prepolymer's molecular weight, various components ratio and polymerization methods on IPN's dynamic mechanical and mechanical properties were investigated.

  9. Use of an acrylic mold for mortise view improvement in ankle fractures: a feasibility study

    NARCIS (Netherlands)

    Donken, C.C.; Verhofstad, M.H.J.; Edwards, M.J.R.; Schoemaker, M.C.; Laarhoven, C.J.H.M. van

    2011-01-01

    We investigated an acrylic mold for use in obtaining ankle radiographs in 31 consecutive patients with ankle fracture. The radiologic examination consisted of routine lateral and mortise views, with the same views procured with the use of the acrylic mold to position the ankle. Radiographic evidence

  10. 40 CFR 721.465 - Alkoxylated alkylpolyol acrylates, adduct with alkylamine (generic).

    Science.gov (United States)

    2010-07-01

    ..., adduct with alkylamine (generic). 721.465 Section 721.465 Protection of Environment ENVIRONMENTAL... Significant New Uses for Specific Chemical Substances § 721.465 Alkoxylated alkylpolyol acrylates, adduct with... substances identified generically as alkoxylated alkylpolyol acrylates, adduct with alkylamine (PMNs...

  11. Formation of Methyl Acrylate from CO 2 and Ethylene via Methylation of Nickelalactones

    KAUST Repository

    Bruckmeier, Christian

    2010-05-24

    The nickel-induced coupling of ethylene and CO2 represents a promising pathway toward acrylates. To overcome the high bond dissociation energies of the M-O moieties, we worked out an in situ methylation of nickelalactones to realize the β-hydride elimination and the liberation of the acrylate species. © 2010 American Chemical Society.

  12. 21 CFR 177.1340 - Ethylene-methyl acrylate copolymer resins.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as... no more than 25 weight percent of polymer units derived from methyl acrylate. (b) The finished food... ethylene-methyl acrylate copolymer resins used in food-packaging adhesives complying with § 175.105 of...

  13. Biocatalytic Synthesis of Maltodextrin-Based Acrylates from Starch and alpha-Cyclodextrin

    NARCIS (Netherlands)

    Kloosterman, Wouter M. J.; Spoelstra-van Dijk, Gerda; Loos, Katja

    2014-01-01

    Novel 2-(beta-maltooligooxy)-ethyl (meth) acrylate monomers are successfully synthesized by CGTase from Bacillus macerans catalyzed coupling of 2-(beta-glucosyloxy)-ethyl acrylate and methacrylate with a-cyclodextrin or starch. HPLC-UV analysis shows that the CGTase catalyzed reaction yields 2-(beta

  14. Use of an acrylic mold for mortise view improvement in ankle fractures: a feasibility study

    NARCIS (Netherlands)

    Donken, C.C.; Verhofstad, M.H.J.; Edwards, M.J.R.; Schoemaker, M.C.; Laarhoven, C.J.H.M. van

    2011-01-01

    We investigated an acrylic mold for use in obtaining ankle radiographs in 31 consecutive patients with ankle fracture. The radiologic examination consisted of routine lateral and mortise views, with the same views procured with the use of the acrylic mold to position the ankle. Radiographic evidence

  15. Neutral, anionic, cationic, and zwitterionic diblock copolymers featuring poly(2-methoxyethyl acrylate) hydrophobic segments

    DEFF Research Database (Denmark)

    Javakhishvili, Irakli; Jankova Atanasova, Katja; Hvilsted, Søren

    2013-01-01

    Amphiphilic diblock copolymers incorporating hydrophobic poly(2-methoxyethyl acrylate) (PMEA) and hydrophilic neutral poly(ethylene glycol) monomethyl ether (mPEG), anionic poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA), cationic poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), and ...

  16. Effect of Beverages on the Hardness and Tensile Bond Strength of Temporary Acrylic Soft Liners to Acrylic Resin Denture Base

    Directory of Open Access Journals (Sweden)

    Safari A.

    2013-12-01

    Full Text Available Statement of Problem: Two potential problems commonly identified with a denture base incorporating a resilient liner are failure of the bond between acrylic resin and soft liner material, and loss of resiliency of the soft liner over time. Since patients may drink different beverages, it is important to evaluate their effects on physical properties of soft lining materials.Purpose: The objective of this in vitro study was to evaluate the effect of different beverages on the hardness of two temporary acrylic-based soft lining materials and their bond strength to the denture base resin.Materials and Method: For the hardness test; a total of 80 rectangular specimens (40mm×10mm×3mm were fabricated from a heat-polymerized polymethylmethacrylate. Two commercially auto-polymerized acrylic resin-based resilient liners; Coe-Soft and Visco-gel were prepared according to the manufacturers’ instructions and applied on the specimens. For the tensile test, 160 cylindrical specimens (30mm×10mm were prepared. The liners were added between specimens with a thickness of 3 mm. The specimens of both soft liners were divided into 4 groups (n=10 and immersed in distilled water as the control group, Coca-Cola, 8% and 50% ethanol. All groups were stored in separate containers at 37oC for 12 days. All beverages were changed daily. The hardness was determined using a Shore A durometer and tensile bond strength was determined in a ZwickRoell testing machine at a cross-head speed of 5mm/min. The results were analyzed using two-way ANOVA.Results: There was no significant interaction between the soft liners and the drinks for both hardness (p= 0.748 and bond strength (p= 0.902. There were statistically signifi-cant differences between all drinks for both hardness (p< 0.001 and bond strength (p< 0.05.Conclusion: Within the limitations of this study, it seems that drinking Coca-Cola and alcoholic beverages would not be potentially causing any problems for the temporary

  17. The Influence of the Constitution of Acrylate Copolymers on Electrochromic Properties of Their Pan Composite Coatings

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Several polyacrylate matrixes were prepared with monomers such as methyl methacrylate,KH-570,acrylic acid and butyl acrylate,and the electrochromic behavior of their soluble Pan composite coatings was also studied by electrochemical analysis and spectrophotometry.It shows that the constitution of the polymer matrixes have great effects on the electrochromic process and the color change of the composite coatings.When the matrix consists of acrylic acid unit,Pan of both interior and exterior composite possesses the same electrochemical reactivity,shorter responding time and wider color-changing range.But it is contrary when matrixes contain no acrylic acid.Furthermore,the composite containing acrylic acid units has still electrochemical reactivity in distilled water instead of LiClO4-PC electrolyte.

  18. Plasma polymerization of acrylic acid onto polystyrene by cyclonic plasma at atmospheric pressure

    Science.gov (United States)

    Chang, Yi-Jan; Lin, Chin-Ho; Huang, Chun

    2016-01-01

    The cyclonic atmospheric-pressure plasma is developed for chamberless deposition of poly(acrylic acid) film from argon/acrylic acid mixtures. The photoemission plasma species in atmospheric-pressure plasma polymerization was identified by optical emission spectroscopy (OES). The OES diagnosis data and deposition results indicated that in glow discharge, the CH and C2 species resulted from low-energy electron-impact dissociation that creates deposition species, but the strong CO emission lines are related to nondeposition species. The acrylic acid flow rate is seen as the key factor affecting the film growth. The film surface analysis results indicate that a smooth, continuous, and uniform surface of poly(acrylic acid) films can be formed at a relatively low plasma power input. This study reveals the potential of chamberless film growth at atmospheric pressure for large-area deposition of poly(acrylic acid) films.

  19. Measurement of Optical Attenuation in Acrylic Light Guides for a Dark Matter Detector

    CERN Document Server

    Bodmer, M; Gold, M; Loomba, D; Matthews, J A J; Rielage, K

    2013-01-01

    Acrylic is a common material used in dark matter and neutrino detectors for light guides, transparent vessels, and neutron shielding, creating an intermediate medium between the target volume and photodetectors. Acrylic has low absorption within the visible spectrum and has a high capture cross section for neutrons. The natural radioactivity in photodetectors is a major source of background neutrons for low background detectors making the use of acrylic attractive for shielding and background reduction. To test the optical properties of acrylic we measured the transmittance and attenuation length of fourteen samples of acrylic from four different manufacturers. Samples were evaluated at five different wavelengths between 375 nm and 632 nm. We found that all samples had excellent transmittance at wavelengths greater than 550 nm. Transmittance was found to decrease below 550 nm. As expected, UV-absorbing samples showed a sharp decrease in transmittance below 425 nm compared to UV-transmitting samples. We report...

  20. UV-crosslinkable photoreactive self-adhesive hydrogels based on acrylics

    Directory of Open Access Journals (Sweden)

    Czech Zbigniew

    2016-06-01

    Full Text Available Hydrogels are a unique class of macromolecular networks that can hold a large fraction of an aqueous solvent within their structure. They are suitable for biomedical area including controlled drug delivery and for technical applications as self-adhesive materials for bonding of wet surfaces. This paper describes photoreactive self-adhesive hydrogels based on acrylics crosslinked using UV radiation. They are prepared in ethyl acetate through radical polymerization of monomers mixture containing 2-ethylhexyl acrylate (2-EHA, butyl acrylate (BA, acrylic acid (AA and copolymerizable photoinitiator 4-acryloyloxy benzophenone (ABP at presence of radical starter 2.2’-azobis-diisobutyronitrile AIBN. The synthesized acrylic copolymers were determined by viscosity and GPC analysis and later modified using ethoxylated amines. 4-acryloyloxy benzophenone (ABP was used as crosslinking monomer. After UV crosslinking the properties of these novel synthesized hydrogels, such as tack, peel adhesion, shears strength, elongation and water adsorption were also studied.

  1. UV degradation of the optical properties of acrylic for neutrino and dark matter experiments

    Energy Technology Data Exchange (ETDEWEB)

    Littlejohn, B; Heeger, K M; Wise, T [Physics Department, University of Wisconsin, Madison, WI, 53706 (United States); Gettrust, E; Lyman, M [Madison West High School, Madison, WI, 53726 (United States)], E-mail: littlejohn@wisc.edu

    2009-09-15

    UV-transmitting (UVT) acrylic is a commonly used light-propagating material in neutrino and dark matter detectors as it has low intrinsic radioactivity and exhibits low absorption in the detectors' light producing regions, from 350 nm to 500 nm. Degradation of optical transmittance in this region lowers light yields in the detector, which can affect energy reconstruction, resolution, and experimental sensitivities. We examine transmittance loss as a result of short- and long-term UV exposure for a variety of UVT acrylic samples from a number of acrylic manufacturers. Significant degradation peaking at 343 nm was observed in some UVT acrylics with as little as three hours of direct sunlight, while others exhibited softer degradation peaking at 310 nm over many days of exposure to sunlight. Based on their measured degradation results, safe time limits for indoor and outdoor UV exposure of UVT acrylic are formulated.

  2. The transverse strength of acrylic resin after Coleus amboinicus, Lour extract solution immersion

    Directory of Open Access Journals (Sweden)

    Devi Rianti

    2006-12-01

    Full Text Available A laboratoric experimental study was conducted on the transverse strength of acrylic resin after Coleus amboinicus, Lour extract solution immersion. The aim of this study is to know the difference of acrylic resin transverse strengths caused by immersion time variations in a concentrate solution. The study was carried out on unpolished acrylic resin plates with 65 × 10 × 2,5 mm dimension; solution with 15% Coleus amboinicus, Lour extract, and 30, 60, 90 days immersion times to measure the transverse strength and sterilized aquadest was used as control. Acrylic resin plates transverse strength was measured using Autograph AG-10 TE. The data was analyzed using One-Way Anova and LSD with 5% degree of significance. The result showed that longer immersion time will decrease the transverse strength of the acrylic resin plates. After 90 days immersion time, the transverse strength decrease is still above the recommended standard transverse strength.

  3. Influence of Solvent Conditons on Average Relative Molecular Weight of Polyoctadecyl Acrylate

    Institute of Scientific and Technical Information of China (English)

    JiangQingzhe; SongZhaozheng; KeMing; ZhaoMifu

    2005-01-01

    Polymerization of octodecyl acrylate is studied in four solvents -- carbon tetrachloride, chloroform,methylbenzene and tetrachloroethane. Experimental results indicate that the sequence of chain transfer constants in solvents is: carbon tetrachloride>chloroform>methylbenzene>tetrachloroethane in the polymerization of octadecyl acrylate. Influences of four solvents on solubility of polyoctadecyl acrylate prove not the same. In chloroform,polyoctadecyl acrylate shows the highest relative viscosity and the lowest chain termination rate constant. In higher conversion, the average relative molecular weight of polyoctadecyl acrylate depends mainly on the chain transfer constant of the solvent. Under the circumstance of monomer conversion higher than 30%, the viscosity effect induced by polymeric molecular shape in the solvents have a strong influence on the relative molecular weight of the polymer obtained.

  4. Comparison of Phaconit Rollable IOL with Acrylic Foldable IOL.

    Science.gov (United States)

    Parihar, Jks; Vats, D P; Gupta, R P; Bera, T R; Phooken, R; Singh, A

    2007-01-01

    Phaconit or ultra micro incision phacoemulsification cataract surgery involves phacoemulsification through a 0.9 millimetre sleeveless phaco tip and irrigating chopper followed by implantation of a rollable intraocular lens. The procedure leads to negligible astigmatism and faster visual recovery as compared to phacoemulsification with a foldable intraocular lens. This prospective study analysed 80 cases of sub millimetre phaconit surgery with implantation of rollable intraocular lenses(IOL) in 40 cases and acrylic foldable IOL in the remaining 40 cases. Evaluation of efficacy and adaptability of procedure, equipment settings, operative constraints, postoperative complications, keratometric and topographic evaluation of induced astigmatism with visual outcome and patient's rehabilitation were studied. The intraoperative complications were surge/ chamber collapse in 16 (20%), iris chaffing in one and corneal burns in two cases. All cases had an induced astigmatism of less than or equal to ± 0.25 D in four to six weeks after rollable IOL and ± 0.5 D to ± 0.75 D after acrylic IOL implantation. All patients had best-corrected visual acuity of 6/6 by third post operative day. Phaconit with rollable IOL is a perfect blend of surgical skill, application of technology and ultra thin IOL.

  5. Wet air oxidation of epoxy acrylate monomer industrial wastewater.

    Science.gov (United States)

    Yang, Shaoxia; Liu, Zhengqian; Huang, Xiaohui; Zhang, Beiping

    2010-06-15

    Epoxy acrylate monomer industrial wastewater contained highly concentrated and toxic organic compounds. The wet air oxidation (WAO) and catalytic wet air oxidation (CWAO) were used to eliminate pollutants in order to examine the feasibility of the WAO/CWAO as a pre-treatment method for the industrial wastewater. The results showed that in the WAO 63% chemical oxygen demand (COD) and 41% total organic carbon (TOC) removals were achieved and biological oxygen demand (BOD(5))/COD ratio increased from 0.13 to 0.72 after 3h reaction at 250 degrees C, 3.5MPa and the initial concentration of 100g(COD)/L. Among homogenous catalysts (Cu(2+), Fe(2+), Fe(3+) and Mn(2+) salts), Cu(2+) salt exhibited better performance. CuO catalyst was used in the CWAO of the wastewater, COD and TOC conversion were 77 and 54%, and good biodegradability was achieved. The results proved that the CWAO was an effective pre-treatment method for the epoxy acrylate monomer industrial wastewater.

  6. Graft copolymerization of acrylic acid onto polyamide fibers

    Science.gov (United States)

    Makhlouf, Chahira; Marais, Stéphane; Roudesli, Sadok

    2007-04-01

    The grafting of acrylic acid (AA) monomer (CH 2dbnd CH sbnd COOH) on polyamide 6.6 monofilaments (PA 6.6) using benzoyl peroxide (BPO) as initiator was carried out in order to enhance the hydrophilic nature of fibers. The grafting rate depends on the AA concentration, the BPO concentration, the time and the temperature of reaction. The best conditions for optimum rate of grafting were obtained with a AA concentration of 0.5 M, a BPO concentration of 0.03 M, a reaction temperature of T = 85 °C and a reaction time of 120 mn. The fiber surface has been investigated by many experimental techniques of characterization such as Fourier transform infrared spectroscopy (FTIR), calorimetric analysis (DSC), scanning electron microscopy (SEM), and contact angle measurements. The effect of grafting of acrylic acid onto PA 6.6 fibers on their moisture and mechanical resistances was analyzed from water sorption and elongation at break measurements. The analysis of the experimental data shows clearly the efficiency of the grafting reaction used, leading to a significant increase of the hydrophilic character of the PA 6.6 surface.

  7. Characteristics and mechanisms of acrylate polymer damage to maize seedlings.

    Science.gov (United States)

    Chen, Xian; Mao, Xiaoyun; Lu, Qin; Liao, Zongwen; He, Zhenli

    2016-07-01

    Superabsorbent acrylate polymers (SAPs) have been widely used to maintain soil moisture in agricultural management, but they may cause damage to plants, and the mechanisms are not well understood. In this study, seed germination, soil pot culture, hydroponic experiments, and SAPs degradation were conducted to investigate damage characteristics and mechanisms associated with SAPs application. The Results showed that SAPs inhibited maize growth and altered root morphology (irregular and loose arrangement of cells and breakage of cortex parenchyma), and the inhibitory effects were enhanced at higher SAPs rates. After 1h SAP hydrogels treatment, root malondialdehyde (MDA) content was significantly increased, while superoxide dismutase (SOD) and catalase (CAT) content were significantly decreased. Hydroponics experiment indicated that root and shoot growth was inhibited at 2.5mgL(-1) acrylic acid (AA), and the inhibition was enhanced with increasing AA rates. This effect was exacerbated by the presence of Na(+) at a high concentration in the hydrogels. Release and degradation of AA were enhanced at higher soil moisture levels. A complete degradation of AA occurred between 15 and 20 days after incubation (DAI), but it took longer for Na(+) concentration to decrease to a safe level. These results indicate that high concentration of both AA and Na(+) present in the SAPs inhibits plant growth. The finding of this study may provide a guideline for appropriate application of SAPs in agriculture.

  8. Color difference threshold determination for acrylic denture base resins.

    Science.gov (United States)

    Ren, Jiabao; Lin, Hong; Huang, Qingmei; Liang, Qifan; Zheng, Gang

    2015-01-01

    This study aimed to set evaluation indicators, i.e., perceptibility and acceptability color difference thresholds, of color stability for acrylic denture base resins for a spectrophotometric assessing method, which offered an alternative to the visual method described in ISO 20795-1:2013. A total of 291 disk specimens 50±1 mm in diameter and 0.5±0.1 mm thick were prepared (ISO 20795-1:2013) and processed through radiation tests in an accelerated aging chamber (ISO 7491:2000) for increasing times of 0 to 42 hours. Color alterations were measured with a spectrophotometer and evaluated using the CIE L*a*b* colorimetric system. Color differences were calculated through the CIEDE2000 color difference formula. Thirty-two dental professionals without color vision deficiencies completed perceptibility and acceptability assessments under controlled conditions in vitro. An S-curve fitting procedure was used to analyze the 50:50% perceptibility and acceptability thresholds. Furthermore, perceptibility and acceptability against the differences of the three color attributes, lightness, chroma, and hue, were also investigated. According to the S-curve fitting procedure, the 50:50% perceptibility threshold was 1.71ΔE00 (r(2)=0.88) and the 50:50% acceptability threshold was 4.00 ΔE00 (r(2)=0.89). Within the limitations of this study, 1.71/4.00 ΔE00 could be used as perceptibility/acceptability thresholds for acrylic denture base resins.

  9. Dissociative photoionization of ethyl acrylate: Theoretical and experimental insights

    Science.gov (United States)

    Song, Yanlin; Chen, Jun; Ding, Mengmeng; Wei, Bin; Cao, Maoqi; Shan, Xiaobin; Zhao, Yujie; Huang, Chaoqun; Sheng, Liusi; Liu, Fuyi

    2015-08-01

    The photoionization and dissociation of ethyl acrylate have been investigated by time-of-flight mass spectrometer with tunable vacuum ultraviolet (VUV) source in the range of 9.0-20.0 eV. The photoionization mass spectrum (PIMS) for ethyl acrylate and photoionization efficiency (PIE) curves for its major fragment ions: C5H7O2+, C4H5O2+, C3H5O2+, C3H4O+, C3H3O+, C2H5O+, C2H3O+, C2H5+ and C2H4+ have been obtained. The formation channels of main fragments are predicted by Gaussian 09 program at G3B3 level and examined via their dissociation energies from experimental results. Based on our analysis, nine main dissociative photoionization channels are proposed: C5H7O2+ + H, C4H5O2+ + CH3, C3H5O2+ + C2H3, C3H4O+ + C2H4O, C3H3O+ + C2H5O, C2H5O+ + C3H3O, C2H3O+ + C3H5O, C2H5+ + C3H3O2, C2H4+ + C3H4O2, respectively. The results of this work lead to a better understanding of photochemistry in the environment.

  10. Biocompatibility of alendronate-loaded acrylic cement for vertebroplasty

    Directory of Open Access Journals (Sweden)

    T Calvo-Fernández

    2010-10-01

    Full Text Available This paper reports a biological evaluation of a non-resorbable acrylic cement loaded with alendronate for the treatment of osteoporotic vertebral compression fractures. The cement formulation was based on polymethyl methacrylate and acrylic monomers; one of these had covalently linked vitamin E residues. The same cement in the absence of alendronate was used as a control. The setting of the charged cement presented a maximum polymerization temperature of 44ºC, a setting time of 24 min, a residual monomer content lower than 3 wt.%, a compressive strength of 99±10 MPa and an elastic modulus of 1.2±0.2 GPa. Cytotoxicity studies using human osteoblast cultures revealed that the leachable substances of the alendronate loaded cement collected between 1 and 7 days decreased cell viability to values lower than 80%. However, morphological changes and cellular damage in cells produced by the extracts decreased with the leak time. Cell adhesion and growth on charged cement was significantly lower than on the control. Implantation of the cement paste in the intra-femoral cavity of rabbits showed that initially the osteogenic activity was evident for the cement charged with alendronate, and the osteosynthesis process took place mainly in the trabeculae and was manifested by the presence of a non-mineralised osseous spicule. The interface between material and adjacent bone tissue was initially characterized by a variable fibrous response that in many cases it appeared reduced to thin connective tissue after a 24-week-period.

  11. Thin film of Poly(acrylic acid-co-allyl acrylate as a Sacrificial Protective Layer for Hydrophilic Self Cleaning Glass

    Directory of Open Access Journals (Sweden)

    Jānis Lejnieks

    2010-05-01

    Full Text Available Poly(acrylic acid-co-allyl acrylate statistical copolymers were synthesized in a controlled manner in two steps: first tert.butyl acrylate and allyl acrylate were polymerized via atom transfer radical polymerization (ATRP and afterwords the tert.butyl protective groups were removed via hydrolysis. Samples of self cleaning glass (SCG were coated with thin films of poly(acrylic acid-co-allyl acrylate and cross-linked afterwards by UV irradiation (in the presence of a photoinitiator and an accelerator. Solution cast thin films were transparent and homogeneous before and after UV cross-linking. The irradiated samples were found to be hydrophilic (Θ < 20° and water insoluble. The coating prevented the spontaneous hydrophobization of the SCG by residual silicon exhaled from the sealing material. The TiO2 photocatalyst that covers the glass surface was found to strip the protective coating. The rate of the photooxidation process was measured by IR spectroscopy. The real field performance of the protective coating was also tested.

  12. Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling

    NARCIS (Netherlands)

    Saavedra, Guilherme; Valandro, Luz Felipe; Leite, Fabiola Pessoa; Amaral, Regina; Oezcan, Mutlu; Bottino, Marco A.; Kimpara, Estevao T.

    2007-01-01

    This study aimed to evaluate the durability of adhesion between acrylic teeth and denture base acrylic resin. The base surfaces of 24 acrylic teeth were flatted and submitted to 4 surface treatment methods: SM1 (control): No SM; SM2: application of a methyl methacrylate-based bonding agent (Vitacol)

  13. Synthesis of Highly Porous Poly(tert-butyl acrylate)-b-polysulfone-b-poly(tert-butyl acrylate) Asymmetric Membranes

    KAUST Repository

    Xie, Yihui

    2016-03-24

    For the first time, self-assembly and non-solvent induced phase separation was applied to polysulfone-based linear block copolymers, reaching mechanical stability much higher than other block copolymers membranes used in this method, which were mainly based on polystyrene blocks. Poly(tert-butyl acrylate)-b-polysulfone-b-poly(tert-butyl acrylate) (PtBA30k-b-PSU14k-b-PtBA30k) with a low polydispersity of 1.4 was synthesized by combining step-growth condensation and RAFT polymerization. Various advanced electron microscopies revealed that PtBA30k-b-PSU14k-b-PtBA30k assembles into worm-like cylindrical micelles in DMAc and adopts a “flower-like” arrangement with the PSU central block forming the shell. Computational modeling described the mechanism of micelle formation and morphological transition. Asymmetric nanostructured membranes were obtained with a highly porous interconnected skin layer and a sublayer with finger-like macrovoids. Ultrafiltration tests confirmed a water permeance of 555 L m-2 h-1 bar-1 with molecular weight cut-off of 28 kg/mol. PtBA segments on the membrane surface were then hydrolyzed and complexed with metals, leading to cross-linking and enhancement of antibacterial capability.

  14. Comparison of Tensile Strength of Four Kind of Acrylic Artificial Teeth to Acrylic Denture Base In Vitro

    Directory of Open Access Journals (Sweden)

    Rosthamkhani F

    2012-01-01

    Full Text Available Introduction: Acrylic teeth properties in complete denture prostheses are important in prosthesis survival. In this regard, tooth tensile bond strength with denture base is very important. The purpose of this study was to compare tensile bond strength of three kind of artificial teeth to denture base manufactured in Iran with a kind manufactured in Italy. Materials & Methods: In this experimental in vitro study, four kind of artificial teeth (Italian Ivoclar, Yaghoot, Herasit plus and Acradent were used. Nine anterior and premolar teeth were selected and were prepared as Cylinders with 4mm diameter. Through flasking, toothbase was bonded to heat-cured acryl. Samples were thermocycled for 2500times (5˚C-55˚C and then were put in plastic pipes and under stretch to fracture by Zwick Z250 instrument. The data were analysed by One-Way ANOVA and Tukey test.Results: Mean tensile bond strength was 260N for Ivoclar, 195N for Herasit, 124N for yaghoot and 54N for Acradent. Adhesive fracture percentage was 100% for Acradent, 60% for Ivoclar, 50% for yaghoot and 35.7% for Herasit. The rest was for cohesive fracture.Conclusion: The highest tensile bond strength was seen with Ivoclar followed by Herasit, Yaghoot and Acradent respectively.

  15. Antimicrobial activity of a quaternary ammonium methacryloxy silicate-containing acrylic resin: a randomised clinical trial

    Science.gov (United States)

    Liu, Si-ying; Tonggu, Lige; Niu, Li-na; Gong, Shi-qiang; Fan, Bing; Wang, Liguo; Zhao, Ji-hong; Huang, Cui; Pashley, David H.; Tay, Franklin R.

    2016-01-01

    Quaternary ammonium methacryloxy silicate (QAMS)-containing acrylic resin demonstrated contact-killing antimicrobial ability in vitro after three months of water storage. The objective of the present double-blind randomised clinical trial was to determine the in vivo antimicrobial efficacy of QAMS-containing orthodontic acrylic by using custom-made removable retainers that were worn intraorally by 32 human subjects to create 48-hour multi-species plaque biofilms, using a split-mouth study design. Two control QAMS-free acrylic disks were inserted into the wells on one side of an orthodontic retainer, and two experimental QAMS-containing acrylic disks were inserted into the wells on the other side of the same retainer. After 48 hours, the disks were retrieved and examined for microbial vitality using confocal laser scanning microscopy. No harm to the oral mucosa or systemic health occurred. In the absence of carry-across effect and allocation bias (disks inserted in the left or right side of retainer), significant difference was identified between the percentage kill in the biovolume of QAMS-free control disks (3.73 ± 2.11%) and QAMS-containing experimental disks (33.94 ± 23.88%) retrieved from the subjects (P ≤ 0.001). The results validated that the QAMS-containing acrylic exhibits favourable antimicrobial activity against plaque biofilms in vivo. The QAMS-containing acrylic may also be used for fabricating removable acrylic dentures. PMID:26903314

  16. An ORMOSIL-containing orthodontic acrylic resin with concomitant improvements in antimicrobial and fracture toughness properties.

    Directory of Open Access Journals (Sweden)

    Shi-qiang Gong

    Full Text Available Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS. By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.

  17. Facile Fabrication of Gradient Surface Based on (meth)acrylate Copolymer Films

    Science.gov (United States)

    Zhang, Y.; Yang, H.; Wen, X.-F.; Cheng, J.; Xiong, J.

    2016-08-01

    This paper describes a simple and economic approach for fabrication of surface wettability gradient on poly(butyl acrylate - methyl methacrylate) [P (BA-MMA)] and poly(butyl acrylate - methyl methacrylate - 2-hydroxyethyl methacrylate) [P (BA-MMA-HEMA)] films. The (meth)acrylate copolymer [including P (BA-MMA) and P (BA-MMA-HEMA)] films are hydrolyzed in an aqueous solution of NaOH and the transformation of surface chemical composition is achieved by hydrolysis in NaOH solution. The gradient wetting properties are generated based on different functional groups on the P (BA-MMA) and P (BA-MMA-HEMA) films. The effects of both the surface chemical and surface topography on wetting of the (meth)acrylate copolymer film are discussed. Surface chemical composition along the materials length is determined by XPS, and surface topography properties of the obtained gradient surfaces are analyzed by FESEM and AFM. Water contact angle system (WCAs) results show that the P (BA-MMA-HEMA) films provide a larger slope of the gradient wetting than P (BA-MMA). Moreover, this work demonstrates that the gradient concentration of chemical composition on the poly(meth) acrylate films is owing to the hydrolysis processes of ester group, and the hydrolysis reactions that have negligible influence on the surface morphology of the poly(meth) acrylate films coated on the glass slide. The gradient wettability surfaces may find broad applications in the field of polymer coating due to the compatibility of (meth) acrylate polymer.

  18. Gel polymer electrolytes based on nanofibrous polyacrylonitrile–acrylate for lithium batteries

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dul-Sun [Department of Chemical and Biological Engineering, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Woo, Jang Chang [Department of Textile Engineering, Inha University, 100 Inharo, Nam-gu Incheon 402-751 (Korea, Republic of); Youk, Ji Ho, E-mail: youk@inha.ac.kr [Department of Textile Engineering, Inha University, 100 Inharo, Nam-gu Incheon 402-751 (Korea, Republic of); Manuel, James [Department of Chemical and Biological Engineering, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Ahn, Jou-Hyeon, E-mail: jhahn@gnu.ac.kr [Department of Chemical and Biological Engineering, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Department of Materials Engineering and Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of)

    2014-10-15

    Graphical abstract: - Highlights: • Nanofibrous polyacrylonitrile–acrylate membranes were prepared by electrospinning. • Trimethylolpropane triacrylate was used as a crosslinking agent of fibers. • The GPE based on PAN–acrylate (1/0.5) showed good electrochemical properties. - Abstract: Nanofibrous membranes for gel polymer electrolytes (GPEs) were prepared by electrospinning a mixture of polyacrylonitrile (PAN) and trimethylolpropane triacrylate (TMPTA) at weight ratios of 1/0.5 and 1/1. TMPTA is used to achieve crosslinking of fibers thereby improving mechanical strength. The average fiber diameters increased with increasing TMPTA concentration and the mechanical strength was also improved due to the enhanced crosslinking of fibers. GPEs based on electrospun membranes were prepared by soaking them in a liquid electrolyte of 1 M LiPF{sub 6} in ethylene carbonate (EC)/dimethyl carbonate (DMC) (1:1, v/v). The electrolyte uptake and ionic conductivity of GPEs based on PAN and PAN–acrylate (weight ratio; 1/1 and 1/0.5) were investigated. Ionic conductivity of GPEs based on PAN–acrylate was the highest for PAN/acrylate (1/0.5) due to the proper swelling of fibers and good affinity with liquid electrolyte. Both GPEs based on PAN and PAN–acrylate membranes show good oxidation stability, >5.0 V vs. Li/Li{sup +}. Cells with GPEs based on PAN–acrylate (1/0.5) showed remarkable cycle performance with high initial discharge capacity and low capacity fading.

  19. The photocatalytic enhancement of acrylic and PET solar water disinfection (SODIS) bottles.

    Science.gov (United States)

    Carey, J M; Perez, T M; Arsiaga, E G; Loetscher, L H; Boyd, J E

    2011-01-01

    The solar water disinfection method (SODIS) was modified by the addition of a photocatalytic layer of titania on the interior surface of polyethylene terephthalate (PET) and acrylic bottles. Titania was solvent deposited on the interior of commercially available PET bottles, as well as bottles that were constructed from acrylic. Uncoated and titania-coated acrylic bottles removed 3,000,000-5,000,000 colony forming units per milliliter of K12 E. coli from 670 mL of contaminated water in 40 min of solar irradiance. After five hours of sunlight exposure, the concentration of 10 ppm methyl orange (a representative organic water contaminant), was reduced by 61% using the titania-coated acrylic bottles. The concentration of 87 ppb microcystin-LR (a representative algal toxin) was reduced by 70% after 7 hours of sunlight exposure in the titania-coated acrylic bottles. Acrylic is an effective alternative to PET for use in the SODIS method due to its greater UV transparency. The addition of titania to PET and acrylic bottles confers the ability to remove chemical contaminants in addition to inactivating microbiological contaminants.

  20. Optimization of cellulose acrylate and grafted 4-vinylpyridine and 1-vinylimidazole synthesis

    Directory of Open Access Journals (Sweden)

    Bojanić Vaso

    2010-01-01

    Full Text Available Optimization of cellulose acrylate synthesis by reaction with sodium cellulosate and acryloyl chloride was carried out. Optimal conditions for conducting the synthesis reaction of cellulose acrylate were as follows: the molar ratio of cellulose/potassium-t-butoxide/acryloyl chloride was 1:3:10 and the optimal reaction time was 10 h. On the basis of elemental analysis with optimal conditions for conducting the reaction of cellulose acrylate, the percentage of substitution of glucose units in cellulose Y = 80.7%, and the degree of substitution of cellulose acrylate DS = 2.4 was determined. The grafting reaction of acrylate vinyl monomers onto cellulose in acetonitrile with initiator azoisobutyronitrile (AIBN in a nitrogen atmosphere was performed, by mixing for 5 h at acetonitrile boiling temperature. Radical copolymerization of synthesized cellulose acrylate and 4-vinylpyridine, 1-vinylimidazole, 1-vinyl-2-pyrrolidinone and 9-vinylcarbazole, cellulose-poly-4-vinylpyridine (Cell-PVP, cellulose-poly-1- vinylimidazole (Cell-PVIm and cellulose-poly-1-vinyl-2-pyrrolidinone (Cell-P1V2P and cellulose-poly-9-vinylcarbazole (Cell-P9VK were synthesized. Acrylate cellulose and cellulose grafted copolymers were confirmed by IR spectroscopy, based on elementary analysis and the characteristics of grafted copolymers of cellulose were determined. The mass share of grafted copolymers, X, the relationship of derivative parts/cellulose vinyl group, Z, and the degree of grafting copolymers of cellulose (mass% were determined. In reaction of methyl iodide and cellulose-poly-4-vinylpyridine (Cell-PVP the cellulose-1-methyl-poly-4-vinylpyridine iodide (Cell-1-Me-PVPJ was synthesized. Cellulose acrylate and grafted copolymers were obtained with better thermal, electrochemical and ion-emulation properties for bonding of noble metals Au, Pt, Pd from water solutions. The synthesis optimization of cellulose acrylate was applied as a model for the synthesis of grafted

  1. Acrylate Copolymers as Impact Modiifer for Epoxy Resin

    Institute of Scientific and Technical Information of China (English)

    WANG Tao; WANG Jun; CHEN Wei; DUAN Huajun; YANG Shuang; CHEN Xi; ZHANG Bin

    2015-01-01

    P(BA-GMA) (PBG), having various molecular weights, was synthesized by in situ polymerization of butyl acrylate (BA) and glycidyl methacrylate (GMA), and further used as a modifier to improve the comprehensive properties of the epoxy curing system. The copolymers were characterized by gel permeation chromatography (GPC). The effects of various molecular weights of copolymers on the mechanical properties, thermal performance, and phase behavior of the curing system were carefully evaluated. The experimental results of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) showed that glass transition temperature decreased and the tan δ peak shifted to a lower temperature with decreasing molecular weight of copolymer. Mechanical properties analysis of curing films showed that the impact strength and fracture toughness increased significantly upon the addition of PBG, indicating good toughness of the modified epoxy resins. From scanning electron microscopy (SEM) studies of the fracture surfaces of ER/PBG systems, the fracture behavior of epoxy matrix was changed from brittleness to toughness.

  2. Temperature dependence of the dielectric constant of acrylic dielectric elastomer

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Junjie; Chen, Hualing; Li, Bo; Chang, Longfei [Xi' an Jiaotong University, State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi' an (China); Xi' an Jiaotong University, School of Mechanical Engineering, Xi' an (China)

    2013-02-15

    The dielectric constant is an essential electrical parameter to the achievable voltage-induced deformation of the dielectric elastomer. This paper primarily focuses on the temperature dependence of the dielectric constant (within the range of 173 K to 373 K) for the most widely used acrylic dielectric elastomer (VHB 4910). First the dielectric constant was investigated experimentally with the broadband dielectric spectrometer (BDS). Results showed that the dielectric constant first increased with temperature up to a peak value and then dropped to a relative small value. Then by analyzing the fitted curves, the Cole-Cole dispersion equation was found better to characterize the rising process before the peak values than the Debye dispersion equation, while the decrease process afterward can be well described by the simple Debye model. Finally, a mathematical model of dielectric constant of VHB 4910 was obtained from the fitted results which can be used to further probe the electromechanical stability of the dielectric elastomers. (orig.)

  3. Mechanical performance of acrylic bone cements containing different radiopacifying agents.

    Science.gov (United States)

    Ginebra, M P; Albuixech, L; Fernández-Barragán, E; Aparicio, C; Gil, F J; San, Román J; Vázquez, B; Planell, J A

    2002-04-01

    The effect that three different radiopacifying agents, two of them inorganic (BaSO4, ZrO2) and one organic (an iodine containing monomer, IHQM) have on the static and dynamic mechanical properties of acrylic bone cements was studied. Compressive and tensile strength, fracture toughness and fatigue crack propagation were evaluated. The effect of the inorganic fillers depends on their size and morphology. In relation to the radiolucent cement, the addition of zirconium dioxide improved significantly the tensile strength, the fracture toughness and the fatigue crack propagation resistance. In contrast, the addition of barium sulphate produced a decrease of the tensile strength, but did not affect the fracture toughness and improved the crack propagation resistance. When the iodine containing monomer was used, although the tensile strength and the fracture toughness increased, the fatigue crack propagation resistance remained as low as it was for the radiolucent cement.

  4. Polymerisation by acrylamide and acrylic acid inverse suspension

    Directory of Open Access Journals (Sweden)

    Sergio Alejandro LLoreda Blanco

    2010-04-01

    Full Text Available This work describes polymerisation by inverse suspension of acrylamide monomers and acrylic acid for forming homopolymers or copolymers This type of polymersitaion's advantages are described and reasons given for why it should be studied. The article stresses the importance of these types of monomer for obtaining materials presenting great affinity for water, such as super-absorbents and controlled liberation mechanism. Important aspects are presented such as type of initiation, monomer composition and continuous phase composition; parameters are described offering an important basis for formulating a system leading to successfully obtaining the desired materials' most relevant characteristics such as particle distribution and size polymerisation kinetics, conversion and water absorption capacity respecting the system's modifiable parameters. The foregoing is important since the product can be modified, bestowing propierties on it which are suitable for its use.

  5. PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

    Institute of Scientific and Technical Information of China (English)

    Tai-jiang Gui; Hao Wei; Ying Zhao; Xiu-lin Wang; Du-jin Wang; Duan-fu Xu

    2006-01-01

    A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray (EDAX) show that the length and content ofperfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.

  6. Solubility of dense CO2 in two biocompatible acrylate copolymers

    Directory of Open Access Journals (Sweden)

    A. R. C. Duarte

    2006-06-01

    Full Text Available Biocompatible polymers and copolymers are frequently being used as part of controlled delivery systems. These systems can be prepared using a "clean and environment friendly" technology like supercritical fluids. One great advantage of this process is that compressed carbon dioxide has excellent plasticizing properties and can swell most biocompatible polymeric matrixes, thus promoting drug impregnation processes. Mass sorption of two acrylate biocompatible copolymers contact with supercritical carbon dioxide is reported. Equilibrium solubility of dense carbon dioxide in poly(methylmethacrylate-co-ethylhexylacrylate and poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacrylate was studied by a static method at 10.0 MPa and 313 K. The reticulated copolymer had Fickean behavior and its diffusion coefficient was calculated, under operating conditions.

  7. Scintillation properties of acrylate based plastic scintillator by photoploymerization method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Hwan [Dept. of Radiological Science, Cheongju University, Cheongju (Korea, Republic of); Lee, Joo Il [Dept. of of Radiology, Daegu Health College, Daegu (Korea, Republic of)

    2016-12-15

    In this study, we prepared and characterized a acrylate based UV-curable plastic scintillator. It was used co-polymers TMPTA, DHPA and Ultima GoldTM LLT organic scintillator. The emission spectrum of the plastic scintillator was located in the range of 380⁓520 nm, peaking at 423 nm. And the scintillator is more than 50% transparent in the range of 400⁓ 800 nm. The emission spectrum is well match to the quantum efficiency of photo-multiplier tube and the fast decay time of the scintillation is 12 ns, approximately. This scintillation material provides the possibility of combining 3D printing technology, and then the applications of the plastic scintillator may be expected in human dosimetry etc.

  8. Eco-friendly Crosslinking Agent for Acid Functional Acrylic Resin

    Directory of Open Access Journals (Sweden)

    Archana Shah

    2009-01-01

    Full Text Available Oil from J. multifida was extracted and it was first converted into N,N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA. HEJFA has been synthesized by reaction between Jatropha oil and diethanol amine in presence of zinc oxide as a catalyst. The reaction is relatively rapid and proceeded to high yield at 200±5 OC. The resulting HEJFA was used to formulate thermosetting coating compositions. Films were cured at ambient (air drying and elevated (stove drying temperatures using N, N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA as eco-friendly crosslinking agent for acrylic resin. The coating performance of the various compositions was tested by measurement of scratch hardness, impact strength and chemical resistance. The results show better performance of the HEJFA based compositions compared to butylated melamine formaldehyde (MF based compositions.

  9. Water absorbency of chitosan grafted acrylic acid hydrogels

    Science.gov (United States)

    Astrini, N.; Anah, L.; Haryono, A.

    2017-07-01

    Acrylic acid (AA) monomer was directly grafted onto chitosan (CTS) using potassium persulfate (KPS) as an initiator and methylenebisacrylamide (MBA) as a crosslinking agent under an inert atmosphere. One factor affecting the swelling capacity of the obtained hydrogel, KPS concentration, were studied. The hydrogel products were characterized using Fourier Transform Infrared spectroscopy (FTIR) for chemical structure and scanning electron microscopy (SEM) for morphology. Swelling of the hydrogel samples in distilled water and saline solution ( 9% NaCl ) was examined. Swelling capacity of the CTS-g-PAA hydrogels in distilled water (88.53 g/g) was higher than in NaCl solution (29.94 g/g) The highest swelling capacity value was obtained when the grafted reaction was carried out using 2.5wt% initiator

  10. Novel polymer coatings based on plasma polymerized 2-methoxyethyl acrylate

    DEFF Research Database (Denmark)

    Wu, Zhenning; Jiang, Juan; Benter, Maike

    2008-01-01

    plasma system[4]. The system named SoftPlasma™ is equipped with unique three-phase pulsed AC voltage. Low energy plasma polymerization has almost no thermal load for sensitive polymer materials[5]. Plasma polymerized coatings are highly cross-linked, pin-hole free and provide hydrophilic or hydrophobic...... properties[4-6]. We have exploited these possibilities and prepared plasma polymerized 2-methoxyethyl acrylate (PPMEA) coatings on various polymer substrates. The PPMEA coatings were optimized using various plasma polymerization conditions and characterized by X-ray photoelectron spectroscopy......, Fouriertransform infrared spectroscopy, Atomic force spectroscopy and Water contact-angle measurements. The microstructures ofPPMEA coatings with different thicknesses were also studied. For practical applications in mind, the coating stability was tested in different media (air, water, acetone, phosphate...

  11. Swelling Behaviors of Polyaniline-Poly(Acrylic Acid) Hydrogels

    Institute of Scientific and Technical Information of China (English)

    ZHANG You-wei; ZHAO Jiong-xin; LI Xiao-feng; TAO Yong; WU Cheng-xun

    2005-01-01

    Using poly(acrylic acid) (PAA) aqueous solution, NaOH aqueous solution, aniline(An) and ammonim persulfate(APS), PAn-PAA hydrogels with a semi-interpenetrating structure connected by physical interlocks, chemical ion bonds and hydrogen bonds wcre prepared. The swelling properties of the hydrogels in solutions of different pH values(adjusted by adding NaOH or HCl) were studied. All the hydrogels prepared have similar swelling curves (the curves of equilibrium swelling ratio vs. pH value) and reach their maximum swelling at pH of 8 - 10. The maximum swelling ratio of the hydrogels is dependent on composition, including molecular weight of PAA, polymer content of the hydrogel,and molar ratios of AA to An, APS to An, and NaOH to AA.And the compositional dependence of the swelling capacity of PAn-PAA hydrogels was also studied.

  12. Thermal Stability of Poly (acrylonitrile-methyl acrylate) Copolymers

    Institute of Scientific and Technical Information of China (English)

    HAN Na; ZHANG Xing-xiang; WANG Xue-chen

    2008-01-01

    Poly (acrylonitrile-methyl acrylate) copolymer was synthesized by water depositing polymerization and has a typical feed ratio of 85/15. And then 1 - 3 wt% lauryl alcohol maleic anhydride (LAM) was adopted as stabilizer to mix with the acrylonitrile based copolymer. The mixtures were characterized by using Fourier Transform Infrared Spectroscopy (FTIR), Nuclear Magnetic Resonance (1H NMR ), Gel Permeation Chromatography ( GPC ), Differential Scanning Calorimetry (DSC), optic microscope and Ubbelohde viscosimetryr etc. The melting point (Tm) and glass transition temperature (Tg) of the 85/15 AN/MA copolymer mixed with LAM all decrease with the increase of stabilizer content. The lowest Tg and Tm were 116.1 ℃ and 209. 1℃ respectively at the heating rate of 100℃/min when the content of LAM is 2 wt%. The 85°/15 AN/MA copolymer mixed with 1 - 3 w t% LAM possess good thermal stability up to 30 min at 220 ℃.

  13. Preparation of an imogolite/poly(acrylic acid) hybrid gel.

    Science.gov (United States)

    Lee, Hoik; Ryu, Jungju; Kim, Donghyun; Joo, Yongho; Lee, Sang Uck; Sohn, Daewon

    2013-09-15

    Many efforts in the field of hydrogels have been focused toward increasing the mechanical strength of the gel using inorganic materials. In this study, we synthesized a hydrogel that has excellent mechanical properties using surface-modified inorganic nanofibers composed of imogolite (Al2SiO3(OH)4), which is a hydrated aluminum silicate that has a hollow tube structure. Gamma ray radiation generates peroxide radicals on the nanofibers (imogolite), resulting in an additive free hybrid hydrogel. Structural optimization was carried out by changing the composition of imogolite and poly(acrylic acid). Chemical bonding between the nanofiber and the polymer was simulated by a cluster model and characterized by wide area Raman spectroscopy. The results indicate that imogolite embedded in a polymer matrix can align along the direction of an elongational force, as confirmed by small angle X-ray scattering (SAXS).

  14. New initiation system for polymerization of acryl acid

    Institute of Scientific and Technical Information of China (English)

    LI Hai-pu; ZHONG Hong; CHEN Qi-yuan; YIN Zhou-lan

    2005-01-01

    The redox initiation system for polyacrylate sodium of high molecular mass was designed and its effect with varying component dosage on the degree of polymerization was investigated. The results show that the proper type and amount of inorganic salt, as well as amine initiator, are conductive to the increase of degree of polymerization. The fine ingredient of the initiation system is as follows:the dosages of amine, persulphate and inorganic salt are 0.75%, 0.10% and 1.00% by mass based on acryl acid respectively, the molar ratio of sulphite to the persulphate is 1:1. Under such conditions the degree of polyacrylate can reach 7.43×107 with a acceptable polymerization time for industrial production.

  15. Flexural strength of acrylic resins polymerized by different cycles

    Directory of Open Access Journals (Sweden)

    Débora Barros Barbosa

    2007-10-01

    Full Text Available Despite the large number of studies addressing the effect of microwave polymerization on the properties of acrylic resin, this method has received limited clinical acceptance. This study evaluated the influence of microwave polymerization on the flexural strength of a denture base resin. A conventional heat-polymerized (Clássico, a microwave-polymerized (Onda-Cryl and a autopolymerizing acrylic (Jet resins were used. Five groups were established, according to polymerization cycles: A, B and C (Onda-Cryl, short cycle - 500W/3 min, long - 90W/13 min + 500W/90 sec, and manufacturing microwave cycle - 320W/3 min + 0W/3 min + 720W/3 min; T (Clássico, water bath cycle - 74ºC/9h and Q (Jet, press chamber cycle - 50ºC/15 min at 2 bar. Ten specimens (65 x 10 x 3.3mm were prepared for each cycle. The flexural strength of the five groups was measured using a three-point bending test at a cross-head speed of 5 mm/min. Flexural strength values were analyzed by one-way ANOVA and the Tukey's test was performed to identify the groups that were significantly different at 5% level. The microwave-polymerized groups showed the highest means (p<0.05 for flexural strength (MPa (A = 106.97 ± 5.31; B = 107.57 ± 3.99; C = 109.63 ± 5.19, and there were no significant differences among them. The heat-polymerized group (T showed the lowest flexural strength means (84.40 ± 1.68, and differ significantly from all groups. The specimens of a microwavable denture base resin could be polymerized by different microwave cycles without risk of decreasing the flexural strength.

  16. Synthesis and Properties of Poly (n-Octyl Acrylate) with Uniform Polystyrene Grafts

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Poly (n-octyl acrylate) with uniform polystyrene grafts (POA-g-PS) was obtained by radical copolymerization of n-octyl acrylate (OA) with PS macromer, in solution. The reactivity ratio and effects of copolymerization conditions on grafting efficiency were studied. The crude products were purified by extraction with cyclohexane and n-butanol successively. POA-g-PS exhibited a very good compatibilizing effect on the acrylic rubber/polystyrene blends. 2%-3% of the graft copolymer was enough for enhancing the tensile strength of the blends. DSC and SEM demonstrated the enhancement of compatibility in the presence of the graft copolymer.

  17. Preparation, thermal property and morphology analysis of waterborne polyurethane-acrylate

    Science.gov (United States)

    Zhao, Zhenyu; Jing, Zefeng; Qiu, Fengxian; Dai, Yuting; Xu, Jicheng; Yu, Zongping; Yang, Pengfei

    2017-01-01

    A series of waterborne polyurethane-acrylate (WPUA) dispersions were prepared with isophorone diisocyanate (IPDI), polyether polyol (NJ-210), dimethylol propionic acid (DMPA), hydroxyethyl methyl acrylate (HEMA), different proportions of methyl methacrylate (MMA) and ethyl acrylate (MMA and EA) and initiating agent by the emulsion co-polymerization. The structures, thermal properties and morphology of WPUA films were characterized with FT-IR, DSC, SEM and AFM. Performances of the dispersions and films were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The obtained WPUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.

  18. Studies on the Influence of Monomers on the Performance Properties of Epoxy Acrylate Resin

    Directory of Open Access Journals (Sweden)

    Amrita Sharma

    2008-01-01

    Full Text Available Twelve blend samples were prepared by physical mixing of epoxy acrylate resins with various monomers viz. ethoxylated phenol monoacrylate (EOPA, tripropylene glycol diacrylate (TPGDA and trimethylol propane tri acrylate(TMPTA, having weight ratio of epoxy acrylate resin and monomers are 50:50, 60:40, 70:30, 80:20. These samples were cured under UV radiation using 5% photo initiator by weight. These blends were evaluated for mechanical, chemical & thermal properties. It was found that the sample having mono & tri functional monomers shows better properties than the samples having di functional monomer.

  19. Regiospecific Addition of Uracil to Acrylates Catalyzed by Alkaline Protease from Bacillus subtilis

    Institute of Scientific and Technical Information of China (English)

    Ying CAI; Jian Yi WU; Na WANG; Xiao Feng SUN; Xian Fu LIN

    2004-01-01

    Michael addition reactions of uracil to acrylates were catalyzed by an alkaline protease from Bacillus subtilis in dimethyl sulfoxide at 55 ℃ for 72 h. The adducts were determined by TLC, IR and 1H NMR.

  20. Influence of Reactive Diluent on UV-curing of Acrylate Terminated Hyperbranched Polymers

    Institute of Scientific and Technical Information of China (English)

    TANG Li-ming; FANG Yu; YAN Liang; FU Zhi-wei

    2004-01-01

    A Aeries of hydroxylic hyperbranched polymers were derived from 2,2-bis(methylol) propionic acid and tris (methylol) propane reacted with acrylic acid to various extents. The obtained acrylated hyperbranched polymers alone or with a monofunctional diluent, isobornylene acrylate(IBOA) were further cured by UV radiation. The cured films based on the modified polymers alone all demonstrated poor mechanical properties due to their high network densities and low moving ability of polymer chains. For the composite systems, the cured films demonstrated improved mechanical properties due to the low network densities and high chain moving ability. With more IBOA included in the systems, acrylate groups can react to a higher extent during the curing process.

  1. CATALYTIC HYDROGENATION OF ACRYLATE ASMMETRIC Dd(Ⅱ)—CHELATING RESINS CONTAINING AMINO ACID LIGANDS

    Institute of Scientific and Technical Information of China (English)

    Wangying; WangHongzuo; 等

    1995-01-01

    The catalytic hydrogenation of palladium chelating resins containing chiral amino acid ligands based on lower crosslinked poly(chloroethyl acrylate) and some effects on the rate of hydrogenation were studied.

  2. Studies on LCST of poly (N-isopropylacrylamide-co-acrylic acid-co-N-diacetone acrylamide)

    Institute of Scientific and Technical Information of China (English)

    Cai Hua Ni; Xiao Xia Zhu; Qing Lan Wang; Xian Yu Zeng

    2007-01-01

    Linear copolymers from N-isopropylacrylamide (NIPA), acrylic acid (AA) and diacetone acrylamide (DAA) have been prepared.The effect of composition, ionic strength and pH on their lower critical solution temperature (LCST) has been investigated.

  3. Emulsion polymerization of polystyrene-co-acrylic acid with Cu2O incorporation

    Science.gov (United States)

    Fahmiati, Sri; Harmami, Sri Budi; Meliana, Yenny; Haryono, Agus

    2017-01-01

    In this research, poly(styrene-co-acrylic acid-Cu) was prepared via emulsion polymerization.Cu contents were varied as 10%, 15% and 20% and mol ratio of styrene to acrylic acid as 1:1 and 2:1. Structure and surface of poly(styrene-co-acrylic acid-Cu) were characterized by FTIR (Fourier Transformed Infra Red), NMR (Nuclear Magnetic Resonance), and SEM/EDX (Scanning Electron Microcope/ Energy Dispersive X-Ray) spectroscopy. The NMR spectra showed that the polymer was formed, however FTIR spectra showed that there were still unreacted monomers. SEM-EDX confirmed that copper (Cu) was dispersed uniformly on poly(styrene-co-acrylic acid-Cu) matrix.

  4. Application of the TPB Wavelength Shifter to the DEAP-3600 Spherical Acrylic Vessel Inner Surface

    Science.gov (United States)

    Broerman, B.; Boulay, M. G.; Cai, B.; Cranshaw, D.; Dering, K.; Florian, S.; Gagnon, R.; Giampa, P.; Gilmour, C.; Hearns, C.; Kezwer, J.; Kuźniak, M.; Pollmann, T.; Ward, M.

    2017-04-01

    DEAP-3600 uses liquid argon contained in a spherical acrylic vessel as a target medium to perform a sensitive spin-independent dark matter search. Argon scintillates in the vacuum ultraviolet spectrum, which requires wavelength shifting to convert the VUV photons to visible so they can be transmitted through the acrylic light guides and detected by the surrounding photomultiplier tubes. The wavelength shifter 1,1,4,4-tetraphenyl-1,3-butadiene was evaporatively deposited to the inner surface of the acrylic vessel under vacuum. Two evaporations were performed on the DEAP-3600 acrylic vessel with an estimated coating thickness of 3.00 ± 0.02 μm which is successfully wavelength shifting with liquid argon in the detector. Details on the wavelength shifter coating requirements, deposition source, testing, and final performance are presented.

  5. Synthesis and characterization of amylose grafted poly(acrylic acid) and its application in ammonia adsorption.

    Science.gov (United States)

    Chen, Qing; Yu, Haojie; Wang, Li; Abdin, Zain-Ul; Yang, Xinpeng; Wang, Junhua; Zhou, Weidong; Zhang, Hongtao; Chen, Xiao

    2016-11-20

    Amylose grafted poly(acrylic acid) (Am-g-PAA) was synthesized by graft copolymerization of amylose with acrylic acid. The structure of Am-g-PAA was confirmed by (1)H NMR and FT-IR spectra. The morphology, crystallinity and thermal properties of amylose and Am-g-PAA were investigated by SEM, XRD and TGA, respectively. The highest degree of substitution (DS) of carboxyl group was 1.96 which was obtained after reacted for 1h at 60°C. Acrylic acid to anhydroglucose mole ratio for DS was 19.81. It was found that a large number of carboxyl groups were grafted on the backbone of amylose. It was also found that ammonia adsorption capacity of amylose increased by grafting poly(acrylic acid) on the backbone of amylose.

  6. Biobased composites from thermoplastic polyurethane elastomer and cross-linked acrylated-epoxidized soybean oil

    Science.gov (United States)

    Soybean oil is an important sustainable material. Crosslinked acrylated epoxidized soybean oil (AESO) is brittle without flexibility and the incorporation of thermoplastic polyurethane improves its toughness for industrial applications. The hydrophilic functional groups from both oil and polyurethan...

  7. Water sorption of heat-polymerized acrylic resins processed in mono and bimaxillary flasks

    OpenAIRE

    Meloto, Carolina B.; Silva-Concílio,Laís R.; Machado, Cristiane; Ribeiro,Margarete C.; Joia,Fábio A.; Rizzatti-Barbosa,Célia M.

    2006-01-01

    This study evaluated water sorption in heat-polymerized acrylic resins processed in monomaxillary flasks by water bath and in bimaxillary flasks by microwave energy and water bath. Fifty heat-polymerized acrylic resin specimens were fabricated according to the 12th specification of the American Dental Association and assigned to 3 groups: group 1 was processed by water bath in monomaxillary metallic flask; group 2 was processed by microwave energy in bimaxillary PVC flask; and group 3 was pro...

  8. In vivo cytotoxicity of injection molded and conventional pressure pack acrylic resin dentures

    OpenAIRE

    Ali Riza Tunçdemir; Ahmet Koç; Serdar Polat; H Önder Gümüs; Mehmet Dalkiz

    2012-01-01

    Context: Acrylic resins are widely used in the fabrication of denture bases and have been shown to be cytotoxic as a result of substances that leach from the resin. Aim: The purpose of this study was to compare the cytotoxicity of the injectionmolded and conventional pressure-pack heat polymerized acrylic base resin systems with evaluation of the micronucleus frequency on the oral mucosa of the participants. Materials and Methods: This study was carried out by examining the 20 patients′ bucca...

  9. Effect of post-polymerization heat treatments on the cytotoxicity of two denture base acrylic resins

    OpenAIRE

    Janaina Habib Jorge; Eunice Teresinha Giampaolo; Carlos Eduardo Vergani; Ana Lúcia Machado; Ana Cláudia Pavarina; Iracilda Zeppone Carlos

    2006-01-01

    INTRODUCTION: Most denture base acrylic resins have polymethylmethacrylate in their composition. Several authors have discussed the polymerization process involved in converting monomer into polymer because adequate polymerization is a crucial factor in optimizing the physical properties and biocompatibility of denture base acrylic resins. To ensure the safety of these materials, in vitro cytotoxicity assays have been developed as preliminary screening tests to evaluate material biocompatibil...

  10. In vitro cytotoxicity of self-curing acrylic resins of different colors

    Directory of Open Access Journals (Sweden)

    Luciana Borges Retamoso

    2014-08-01

    Full Text Available OBJECTIVE: The aim of this study was to assess the in vitro cytotoxicity of acrylic resins of different colors over time. METHODS: Specimens were divided into 4 groups (n = 6 according to the color of the acrylic resin (Orto Class, Clássico, Campinas, São Paulo, Brazil: Group 1: clear acrylic resin; group 2: pink acrylic resin; group 3: blue acrylic resin and group 4: green acrylic resin. All specimens were fabricated according to the mass manipulation technique and submitted to mechanical polishing protocol. The control was performed with an amalgam specimen (C+, a glass specimen (C- and cell control (CC. Specimens were immersed in Minimum Eagle's Medium (MEM and incubated for 24 h at 37o C. The extracts from the experimental material were filtered and mixed with L929 fibroblast. Cytotoxicity was evaluated at 4 different times, 24, 48, 72 and 168 h. After contact, cells were incubated for 24 h and added to 100 µ of 0.01% neutral red dye. The cells were incubated for 3 h for pigment incorporation and fixed. Cells viability was determined by a spectroscopic (BioTek, Winooski, Vermont, USA with a 492-nm wavelength λ=492 nm. RESULTS: There were no statistical differences between the experimental groups and the CC and C- groups. CONCLUSION: Clear, pink, blue and green self-curing acrylic resins fabricated by means of the mass manipulation technique and mechanically polished are not cytotoxic. Neither the pigment added to the self-curing acrylic resin nor the factor of time influenced the cytotoxicity of the material.

  11. Preparation and Property of Acrylic Acid Rare Earth Complex and Its Hydrosilylation

    Institute of Scientific and Technical Information of China (English)

    Zhang Ming; Chen Haiyan; Chen Xiaosong; Dai Shaojun; Inoue Shinich; Okamoto Hiroshi

    2004-01-01

    Acrylic acid rare earth complex was prepared. Its chemical composition was determined by chemical and elemental analysis, and its structure as well as properties was characterized using IR, Fluorescence and UV spectrum, and its solubility was also investigated. Meanwhile a kind of elastic functional polymer with rare earth units in the side chains was produced. It is confirmed by IR spectrum that the Si-H bonds really react with acrylic acid rare earth.

  12. EFFECTS OF PHENOL RESIN ADDITIVE ON DYNAMIC MECHANICAL PROPERTIES OF ACRYLATE RUBBER AND ITS BLENDS

    Institute of Scientific and Technical Information of China (English)

    Chi-fei Wu

    2003-01-01

    The dynamic mechanical properties of a new blend system consisting of phenol resin and polar polymer (acrylate rubber and/or chlorinated polypropylene) were investigated. It was found that the addition of phenol resin to acrylate rubber and its incompatible blend can cause a remarkable improvement in the temperature dependence of the loss tangent. As a result, the present blends are very good damping materials.

  13. FT-RAMAN SPECTROSCOPY FOR MONITORING THE POLYMERIZATION OF ACRYLIC ACID IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    Jiang Yu; Hui-zhou Liu; Jia-yong Chen

    1999-01-01

    FT-Raman spectroscopy was used to monitor the polymerization of acrylic acid in aqueous solution. A simple method to avoid the noise in the background during the signal processing via Fourier transformation was used in this work. The effects of the amount of initiator used on the polymerization are studied. When the amount of the initiator in the polymerization was increased, both the rate and extent of polymerization of acrylic acid will be increased.

  14. Direct palladium/copper oxidative cross-coupling of α-methylstyrene with acrylates

    Institute of Scientific and Technical Information of China (English)

    AL-MAKSOUD; Walid; DJAKOVITCH; Laurent; JAHJAH; Mohamad; PINEL; Catherine

    2010-01-01

    Fully palladium/copper catalytic oxidative cross-coupling of acrylates with α-methylstyrene was performed in a DMSO/AcOH(1:1) mixture at 60℃ in the air.This improves previous procedures which employed stoichiometric amounts of copper and oxygen.Thus various acrylates were effectively coupled to α-methylstyrene giving the expected compounds in moderate to good yields(44%-65%) as a mixture of E and Z isomers.

  15. In vitro cytotoxicity of self-curing acrylic resins of different colors.

    Science.gov (United States)

    Retamoso, Luciana Borges; da Cunha, Taís de Morais Alves; Pithon, Matheus Melo; dos Santos, Rogério Lacerda; Martins, Fernanda Otaviano; Romanos, Maria Teresa Villela; Tanaka, Orlando Motohiro

    2014-01-01

    The aim of this study was to assess the in vitro cytotoxicity of acrylic resins of different colors over time. Specimens were divided into 4 groups (n = 6) according to the color of the acrylic resin (Orto Class, Clássico, Campinas, São Paulo, Brazil): Group 1, clear acrylic resin; Group 2, pink acrylic resin; Group 3, blue acrylic resin; and Group 4, green acrylic resin. All specimens were fabricated according to the mass manipulation technique and submitted to mechanical polishing protocol. The control was performed with an amalgam specimen (C+), a glass specimen (C-) and cell control (CC). Specimens were immersed in Minimum Eagle's Medium (MEM) and incubated for 24 h at 37ºC. The extracts from the experimental material were filtered and mixed with L929 fibroblast. Cytotoxicity was evaluated at four different times, 24, 48, 72 and 168 h. After contact, cells were incubated for 24 h and added to 100 µ of 0.01% neutral red dye. The cells were incubated for 3 h for pigment incorporation and fixed. Cells viability was determined by a spectroscopic (BioTek, Winooski, Vermont, USA) with a 492-nm wavelength λ=492 nm). There were no statistical differences between the experimental groups and the CC and C- groups. Clear, pink, blue and green self-curing acrylic resins fabricated by means of the mass manipulation technique and mechanically polished are not cytotoxic. Neither the pigment added to the self-curing acrylic resin nor the factor of time influenced the cytotoxicity of the material.

  16. APPLICATION OF DIRECT CONTACT TEST IN EVALUATION OF CYTOTOXICITY OF ACRYLIC DENTURE BASE RESINS

    OpenAIRE

    Milena Kostić; Stevo Najman; Jelena Najdanović; Nebojša Krunić; Ivan Kostić

    2012-01-01

    The use of acrylic denture base resins is widely spread in dental practice. They belong to the group of biomaterials due to their role of morphological and functional substituent in the mouth. However, clinical practice has shown that some toxic ingredients of these materials may lead to adverse local and even systemic changes. The aim of the study was to evaluate cytotoxic effect of various denture base resins on cell culture using direct contact test. The effect of four different acrylic...

  17. The Effect of Using Modified Flask on the Porosity of Processed Heat- Cure Acrylic Resin

    OpenAIRE

    Mohammed T. Al-Khafagy; Rajaa M. Al-Musawi; Abbas Taher Alaboudy

    2013-01-01

    Porosity is an important property of acrylic resin material because it affect other properties like strength, esthetic and cause bacterial or fungal growth lead to unhealthy dentures. This paper Study the possibility of reducing the porosity of heat- cure acrylic resin by making a modification in the flask of processing .The processing flask was modified by constructing a tongue like projection fixed to the upper half of the flask in order to spread the high temperature occurred in the cente...

  18. Silver hollow optical fibers with acrylic silicone resin coating as buffer layer for sturdy structure

    Science.gov (United States)

    Iwai, Katsumasa; Takaku, Hiroyuki; Miyagi, Mitsunobu; Shi, Yi-Wei; Zhu, Xiao-Song; Matsuura, Yuji

    2016-03-01

    For sturdy silver hollow optical fibers, acrylic silicone resin is newly used as a buffer layer between an inner silver layer and a silica capillary. This acrylic silicone resin film prevents the glass surface from chemical and mechanical micro damages during silver plating process, which deteriorate mechanical strength of the hollow fibers. In addition, it keeps high adhesion of the silver layer with the glass surface. We discuss improvement of mechanical strength of the hollow glass fibers without deterioration of optical properties.

  19. Synthesis and Properties of IPN Hydrogels Based on Konjac Glucomannan and Poly(acrylic acid)

    Institute of Scientific and Technical Information of China (English)

    Bing LIU; Zhi Lan LIU; Ren Xi ZHUO

    2006-01-01

    Novel interpenetrating polymer network (IPN) hydrogels based on konjac glucomannan (KGM) and poly(acrylic acid) (PAA) were prepared by polymerization and cross-linking of acrylic acid (AA) in the pre-fabricated KGM gel. The IPN gel was analyzed by FT-IR. The studies on the equilibrium swelling ratio of IPN hydrogels revealed their sensitive response to environmental pH value. The results of in vitro degradation showed that the IPN hydrogels retain the enzymatic degradation character of KGM.

  20. N-1 regioselective Michael-type addition of 5-substituted uracils to (2-hydroxyethyl acrylate

    Directory of Open Access Journals (Sweden)

    Walczak Krzysztof Z

    2007-11-01

    Full Text Available Abstract N-1 regioselective Michael-type addition of 5-substituted uracils to (2-hydroxyethyl acrylate is presented. The reactions were performed in polar aprotic solvents and with avoidance of polymerization of acrylic substrate. The obtained adducts may serve as versatile substrates for further functionalization, e.g. into (3-uracil-1-ylpropanoic acids or transformations, with participation of hydroxyl group, into ester-conjugated acyclic nucleosides.

  1. Modification of polyamide 6.6 dyeing properties by grafting with poly(acrylic acid)

    OpenAIRE

    Miranda, Teresa; Santos, Jorge Gomes; Soares, Graça M. B.

    2012-01-01

    978-972-8063-67-2 The wet chemical surface modification continues to be a growing area of research interest. This study describes preparation and characterization of poly (acrylic acid)-grafted polyamide 6.6 fabric. Poly(acrylic acid) has been grafted onto polyamide backbone using benzoyl peroxide (BPO) as catalyst in aqueous medium. The benzoyl peroxide initiator optimum concentration was 0.03 M. The best conditions for optimum grafting reaction were reaction time 120 min, grafting tem...

  2. Radiation-induced grafting of acrylic acid onto polypropylene film and its biodegradability

    Science.gov (United States)

    Mandal, Dev K.; Bhunia, Haripada; Bajpai, Pramod K.; Chaudhari, C. V.; Dubey, K. A.; Varshney, L.

    2016-06-01

    Polypropylene based commodity polyolefins are widely used in packaging, manufacturing, electrical, pharmaceutical and other applications. The aim of the present work is to study the effect of grafting of acrylic acid on the biodegradability of acrylic acid grafted polypropylene. The effect of different conditions showed that grafting percentage increased with increase in monomer concentration, radiation dose and inhibitor concentration but decreased with increase in radiation dose rate. The maximum grafting of 159.4% could be achieved at optimum conditions. The structure of grafted polypropylene films at different degree of grafting was characterized by EDS, FTIR, TGA, DSC, SEM and XRD. EDS studies showed that the increase in acrylic acid grafting percentage increased the hydrophilicity of the grafted films. FTIR studies indicated the presence of acrylic acid on the surface of polypropylene film. TGA studies revealed that thermal stability decreased with increase in grafting percentage. DSC studies showed that melting temperature and crystallinity of the grafted polypropylene films lower than polypropylene film. SEM studies indicated that increase in acrylic acid grafting percentage increased the wrinkles in the grafted films. The maximum biodegradability could be achieved to 6.85% for 90.5% grafting. This suggested that microorganisms present in the compost could biodegrade acrylic acid grafted polypropylene.

  3. Allergic contact dermatitis from sculptured acrylic nails: special presentation with an airborne pattern.

    Science.gov (United States)

    Maio, Paula; Carvalho, Rodrigo; Amaro, Cristina; Santos, Raquel; Cardoso, Jorge

    2012-01-02

    Methylmethacrylate was first reported in 1941 as a cause of contact dermatitis. Since then, occupational contact allergies to acrylates in dentistry, orthopedic surgery, printing industry and industry have been reported, but few reports are found in the literature as a consequence of the contact with sculptured artificial acrylic nails which are increasingly popular. We describe here 3 patients with contact allergy to acrylates in artificial sculptured nails. Patch tests were performed with the Portuguese baseline series of contact allergens and an extended series of acrylates were applied. In particular, we tested three female patients with allergic contact dermatitis from sculptured acrylic nails. Two of these patients were both customers and also technical nail beauticians. Two patients developed periungual eczema; one presented only with face and eyelid dermatitis had no other lesions. The tests showed positive reaction to 2-hydroxyethylmethacrylate (2-HEMA) and 2-hydroxypropylmethacrylate (2-HPMA) in all the three patients. Our cases demonstrate the variety of clinical presentations of allergic contact dermatitis from acrylic sculptured nails. They show the need to warn patients of persistent and sometimes permanent side effects of these products. They also emphasize the importance of cosmetic ingredient labeling.

  4. Allergic contact dermatitis from sculptured acrylic nails: special presentation with an airborne pattern

    Directory of Open Access Journals (Sweden)

    Paula Maio

    2012-05-01

    Full Text Available Methylmethacrylate was first reported in 1941 as a cause of contact dermatitis. Since then, occupational contact allergies to acrylates in dentistry, orthopedic surgery, printing industry and industry have been reported, but few reports are found in the literature as a consequence of the contact with sculptured artificial acrylic nails which are increasingly popular. We describe here 3 patients with contact allergy to acrylates in artificial sculptured nails. Patch tests were performed with the Portuguese baseline series of contact allergens and an extended series of acrylates were applied. In particular, we tested three female patients with allergic contact dermatitis from sculptured acrylic nails. Two of these patients were both customers and also technical nail beauticians. Two patients developed periungual eczema; one presented only with face and eyelid dermatitis had no other lesions. The tests showed positive reaction to 2-hydroxyethylmethacrylate (2-HEMA and 2-hydroxypropylmethacrylate (2-HPMA in all the three patients. Our cases demonstrate the variety of clinical presentations of allergic contact dermatitis from acrylic sculptured nails. They show the need to warn patients of persistent and sometimes permanent side effects of these products. They also emphasize the importance of cosmetic ingredient labeling.

  5. Preparation of Poly(acrylic acid Hydrogel by Radiation Crosslinking and Its Application for Mucoadhesives

    Directory of Open Access Journals (Sweden)

    Young-Chang Nho

    2014-03-01

    Full Text Available A mucoadhesive drug delivery system can improve the effectiveness of a drug by maintaining the drug concentration and allowing targeting and localization of the drug at a specific site. Acrylic-based hydrogels have been used extensively as a mucoadhesive system owing to their flexibility and excellent bioadhesion. In this experiment, poly(acrylic acid was selected to prepare the bioadhesive hydrogel adhering to mucosal surfaces using a radiation process. Poly(acrylic acid was dissolved in water to a prepare poly(acrylic acid solution, and the solution was then irradiated by an electron beam at up to 75 kGy to make hydrogels. Their physical properties, such as gel percent, swelling percent and adhesive strength to mucosal surfaces, were investigated. Triamcinolone acetonide was used as a model drug. The dried poly(acrylic acid film was dipped in a 0.1 wt% triamcinolone acetonide solution in ethanol, and then dried at 25 °C. The release of triamcinolone acetonide was determined at different time intervals, and UV (Ultraviolet-Vis spectroscopy was used to determine the released concentration of triamcinolone acetonide at 238 nm. It was shown that poly(acrylic acid-based drug carriers were successfully prepared for use in a bioadhesive drug delivery system.

  6. Dimensional change of acrylic resin plate after the reinforcement of glass fibre

    Directory of Open Access Journals (Sweden)

    Dwiyanti Feriana Ratwita

    2007-06-01

    Full Text Available The effect of fibre reinforcement of polymethyl methacrylate was investigated. Glass fibres have been studied as strengthening material added to polymethyl methacrylate. The purpose of this study was to evaluate dimensional change of acrylic resin plate after glass fibre reinforcement. As a research subject is an acrylic resin plate of 65 × 10 × 2.5 mm with the number of 32 samples were distributed randomly in 4 experimental groups. Each group consisted of 8 samples and control groups. Group 1: acrylic resin plate and 1 sheet glass fibre; group 2: acrylic resin plate and 2 sheet glass fibre; group 3: acrylic resin plate and 3 sheet glass fibre. Control group which was not given treatment. Dimensional change was measured by profile projector. The data was analyzed by One-Way ANOVA and LSD test showed that there was significant difference in dimensional change (p < 0.005. The conclusion suggested that dimensional change of the acrylic resin plates after glass fibre reinforcement minimally done 1 sheet glass fibre.

  7. In situ reactive compatibilization of natural rubber/acrylic-bentonite composites via peroxide-induced vulcanization

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Lihua; Lei, Zhiwen [Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Xu, Chuanhui, E-mail: xuhuiyee@gxu.edu.cn [Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Chen, Yukun, E-mail: cyk@scut.edu.cn [The Key Laboratory of Polymer Processing Engineering, Ministry of Education, China(South China University of Technology), Guangzhou, 510640 (China)

    2016-02-15

    To achieve good interfacial interaction between fillers and rubber matrix is always a hot topic in rubber reinforcing industry. In this paper, acid activated bentonite (Bt) was alkalified to be alkaline calcium-bentonite (ACBt), then acrylic acid (AA) was employed to modify ACBt to obtain acrylic-bentonite (ABt). The results of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) illustrated that acrylate groups were chemically boned onto the surface of Bt and the layer spacing of Bt was increased. During peroxide-induced vulcanization, in situ compatibilization of ABt was realized via the reaction between the unsaturated bonds of acrylate groups on the surface of Bt and the natural rubber (NR) chains. This resulted in an enhanced cross-linked network which contributed to the improved mechanical properties of NR/ABt composites. - Highlights: • Acrylate groups were chemically boned onto the surface of bentonite. • In situ compatibilization was realized via the reaction of acrylate group and NR. • ABt particles participated in forming the NR crosslink network. • A potential reinforcing material options for “white” rubber products.

  8. Effect of autoclave postpolymerization treatments on the fracture toughness of autopolymerizing dental acrylic resins.

    Science.gov (United States)

    Durkan, Rukiye; Gürbüz, Ayhan; Yilmaz, Burak; Özel, M Birol; Bağış, Bora

    2012-06-26

    Microwave and water bath postpolymerization have been suggested as methods to improve the mechanical properties of heat and autopolymerizing acrylic resins. However, the effects of autoclave heating on the fracture properties of autopolymerizing acrylic resins have not been investigated. The aim of this study was to assess the effectiveness of various autoclave postpolymerization methods on the fracture properties of 3 different autopolymerizing acrylic resins. Forty-two specimens of 3 different autopolymerizing acrylic resins (Orthocryl, Paladent RR and Futurajet) were fabricated (40x8x4mm), and each group was further divided into 6 subgroups (n=7). Control group specimens remained as processed (Group 1). The first test group was postpolymerized in a cassette autoclave at 135°C for 6 minutes and the other groups were postpolymerized in a conventional autoclave at 130°C using different time settings (5, 10, 20 or 30 minutes). Fracture toughness was then measured with a three-point bending test. Data were analyzed by ANOVA followed by the Duncan test (α=0.05). The fracture toughness of Orthocryl and Paladent-RR acrylic resins significantly increased following conventional autoclave postpolymerization at 130°C for 10 minutes (Pautoclave postpolymerized Futurajet was not significantly different than its control specimens (Pautoclaved at 130°C for 10 minutes. Within the limitations of this study, it can be suggested that autoclave postpolymerization is an effective method for increasing the fracture toughness of tested autoploymerized acrylic resins.

  9. Aqueous Tape Casting Process with Styrene-acrylic Latex Binder

    Institute of Scientific and Technical Information of China (English)

    CUI Xue-min; OUYANG Shi-xi; HUANG Yong; YU Zhi-yong; ZHAO Shi-ke; WANG Chang-an

    2004-01-01

    A commercial styrene-acrylic latex binder has been investigated as a good binder for aqueous Al2O3 suspensions tape-casting process. This paper focuses on the forming film mechanism of latex binder, the rheological behaviors of the suspensions, physical properties of green tapes and drying process of aqueous slurries with latex binder system. The drying process of the alumina suspensions is shown to follow a two-stage mechanism (the first stage: evaporation controlled process; and the second stage: diffusion controlled process). During the drying stage of the suspensions, the compressive force presses the latex particles and makes them be distorted, which results in cross-linking structure in contacted latex particles of the solidified tapes.A smooth-surface and high-strength green tape was fabricated by aqueous tape casting with latex binder system. The results from the SEM images of the crossing section microstructure of green tapes show that the latex is a very suitable binder for aqueous tape casting.

  10. Studies on thin film materials on acrylics for optical applications

    Indian Academy of Sciences (India)

    K Narasimha Rao

    2003-02-01

    Deposition of durable thin film coatings by vacuum evaporation on acrylic substrates for optical applications is a challenging job. Films crack upon deposition due to internal stresses and leads to performance degradation. In this investigation, we report the preparation and characterization of single and multi-layer films of TiO2, CeO2, Substance2 (E Merck, Germany), Al2O3, SiO2 and MgF2 by electron beam evaporation on both glass and PMMA substrates. Optical micrographs taken on single layer films deposited on PMMA substrates did not reveal any cracks. Cracks in films were observed on PMMA substrates when the substrate temperature exceeded 80°C. Antireflection coatings of 3 and 4 layers have been deposited and characterized. Antireflection coatings made on PMMA substrate using Substance2 (H2) and SiO2 combination showed very fine cracks when observed under microscope. Optical performance of the coatings has been explained with the help of optical micrographs.

  11. MODIFIED ULTRAVIOLET-CURABLE WATER DISPERSIBLE POLYURETHANE-ACRYLATES

    Institute of Scientific and Technical Information of China (English)

    Jian-wen Yang; Zhi-ming Wang; Zhao-hua Zeng; Hui-ya Yuan; Yong-lie Chen

    2001-01-01

    Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolvmers based on PEG having higher Mn values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.

  12. Fabricating of full denture acrylic protheses with palatine torus

    Directory of Open Access Journals (Sweden)

    Ima Hariyati

    2016-06-01

    Full Text Available Full denture acrylic protheses can substitute all maxillary or mandibulary teeth naturally. The objective of fabricating full denture protheses is to substitute the tissue lost that was occupied by teeth or connective tissue before ward. This is a case of a 43 year old female with lost of all her upper and lower teeth. At the maxilla there is a palatine torus spreading along the midline with 25 mm length, 10 mm width and 6mm height. She has never worn prothese before. The process of full denture protheses fabrication were carried out in several steps, starting from making anatomical impression  to get study model, making of individual stock tray, making functional impression to get working model, choosing the design, making of midline, making of bite rim, inserting the model on articulator, preparing artificial teeth arrangement, fitting the wax, countoring wax, flasking, boiling out, packing, curing, deflasking, finishing, polishing and inserting the protheses. The process of this full denture protheses fabrication used tin foil as reducer to prevent overpressure of the tissue around the thin torus area so the prothesis will be more comfortable for the patient. The result was the protheses can be used by the patient, nicely and comfortably.

  13. Acoustic Performance of Resilient Materials Using Acrylic Polymer Emulsion Resin

    Directory of Open Access Journals (Sweden)

    Haseog Kim

    2016-07-01

    Full Text Available There have been frequent cases of civil complaints and disputes in relation to floor impact noises over the years. To solve these issues, a substantial amount of sound resilient material is installed between the concrete slab and the foamed concrete during construction. A new place-type resilient material is made from cement, silica powder, sodium sulfate, expanded-polystyrene, anhydrite, fly ash, and acrylic polymer emulsion resin. Its physical characteristics such as density, compressive strength, dynamic stiffness, and remanent strain are analyzed to assess the acoustic performance of the material. The experimental results showed the density and the dynamic stiffness of the proposed resilient material is increased with proportional to the use of cement and silica powder due to the high contents of the raw materials. The remanent strain, related to the serviceability of a structure, is found to be inversely proportional to the density and strength. The amount of reduction in the heavyweight impact noise is significant in a material with high density, high strength, and low remanent strain. Finally, specimen no. R4, having the reduction level of 3 dB for impact ball and 1 dB for bang machine in the single number quantity level, respectively, is the best product to obtain overall acoustic performance.

  14. Icephobicity of polydimethylsiloxane-b-poly(fluorinated acrylate)

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hui [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); School of Chemistry and Chemical Engineering, Shandong Key Laboratory of Fluorine Chemistry and Chemical Engineering Materials, University of Jinan, Jinan 250022 (China); Li, Xiaohui; Luo, Chenghao; Zhao, Yunhui [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); Yuan, Xiaoyan, E-mail: yuanxy@tju.edu.cn [School of Materials Science and Engineering, Tianjin University, Tianjin 300072 (China); Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China)

    2014-12-31

    A facile process to fabricate icephobic surfaces was developed by spin-coating the polydimethylsiloxane-b-poly(fluorinated acrylate) (PDMS-b-PFA) block copolymers on the substrate. The surface microstructure and chemical composition of the block copolymer films can be adjusted by changing the PDMS content. Icephobic properties of the copolymer surface were mainly ascribed to “flexible-hard” microphase separation and the ratio of fluorine to silicon. The appropriate microphase domain size and the fluorine/silicon ratio could weaken the interaction of ice and copolymer surface and delay icing of water droplets on the copolymer surface. The copolymers containing 15 wt.% PDMS showed the most outstanding icephobicity by depressing the interaction between ice and the copolymer surface. - Highlights: • PDMS-b-PFA block copolymers with different PDMS contents were synthesized. • Surface microstructure can be adjusted by changing the content of PDMS. • The ratio of fluorine/silicon increased with the decrease of the PDMS content. • Ice adhesion and shear strength were decreased by the synergistic effect of silicon and fluorine.

  15. Synthesis of acrylates and methacrylates from coal-derived syngas

    Energy Technology Data Exchange (ETDEWEB)

    Spivey, J.J.; Gogate, M.R.; Jang, B.W.L. [Bechtel, San Francisco, CA (United States)] [and others

    1995-12-31

    Acrylates and methacrylates are among the most widely used chemical intermediates in the world. One of the key chemicals of this type is methyl methacrylate. Of the 4 billion pounds produced each year, roughly 85% is made using the acetone-cyanohydrin process, which requires handling of large quantities of hydrogen cyanide and produces ammonium sulfate wastes that pose an environmental disposal challenge. The U.S. Department of Energy and Eastman Chemical Company are sharing the cost of research to develop an alternative process for the synthesis of methyl methacrylate from syngas. Research Triangle Institute is focusing on the synthesis and testing of active catalysts for the condensation reactions, and Bechtel is analyzing the costs to determine the competitiveness of several process alternatives. Results thus far show that the catalysts for the condensation of formaldehyde and the propionate are key to selectively producing the desired product, methacrylic acid, with a high yield. These condensation catalysts have both acid and base functions and the strength and distribution of these acid-base sites controls the product selectivity and yield.

  16. Early Adhesion of Candida albicans onto Dental Acrylic Surfaces.

    Science.gov (United States)

    Aguayo, S; Marshall, H; Pratten, J; Bradshaw, D; Brown, J S; Porter, S R; Spratt, D; Bozec, L

    2017-07-01

    Denture-associated stomatitis is a common candidal infection that may give rise to painful oral symptoms, as well as be a reservoir for infection at other sites of the body. As poly (methyl methacrylate) (PMMA) remains the main material employed in the fabrication of dentures, the aim of this research was to evaluate the adhesion of Candida albicans cells onto PMMA surfaces by employing an atomic force microscopy (AFM) single-cell force spectroscopy (SCFS) technique. For experiments, tipless AFM cantilevers were functionalized with PMMA microspheres and probed against C. albicans cells immobilized onto biopolymer-coated substrates. Both a laboratory strain and a clinical isolate of C. albicans were used for SCFS experiments. Scanning electron microscopy (SEM) and AFM imaging of C. albicans confirmed the polymorphic behavior of both strains, which was dependent on growth culture conditions. AFM force-spectroscopy results showed that the adhesion of C. albicans to PMMA is morphology dependent, as hyphal tubes had increased adhesion compared with yeast cells ( P adhesion observed in the tube region. Comparison between strains demonstrated increased adhesion forces for a clinical isolate compared with the lab strain. The clinical isolate also had increased survival in blood and reduced sensitivity to complement opsonization, providing additional evidence of strain-dependent differences in Candida-host interactions that may affect virulence. In conclusion, PMMA-modified AFM probes have shown to be a reliable technique to characterize the adhesion of C. albicans to acrylic surfaces.

  17. Effect of cationic monomer on properties of fluorinated acrylate latex

    Institute of Scientific and Technical Information of China (English)

    Li Jun Chen

    2012-01-01

    Cationic fluorinated acrylate latex was prepared via semi-continuous emulsion copolymerization of cationic monomer and other monomers.The resultant latex and its film were characterized with dynamic light scattering detector and contact angle meter.Influences of amount of DMDAAC on the properties of resultant latex and its film were investigated in detail.Results show that the particle size of the latex has the minimum value and the zeta potential of the latex is increased when the amount of DMDAAC is increased.In addition,the particle size of the latex is unimodal distribution when the amount of DMDAAC is not more than 2.5%.However,the particle size of the latex is bimodal distribution when the amount of DMDAAC is more than 2.5%.The contact angle is varied slightly with the increase of amount of DMDAAC when it is not more than 2.5%.Nevertheless,the contact angle is decreased with the increase of the amount of DMDAAC when it is more than 25%.

  18. [Adaptation of acrylic resin dentures polymerized using various activation modes].

    Science.gov (United States)

    Takamata, T; Inoue, Y; Hashimoto, K; Sugitou, S; Arakawa, H; Kurasawa, I

    1989-12-01

    The purpose of this in vitro study was to compare the dimensional accuracy of maxillary dentures made using a conventional heat-activated PMMA resin, a pour resin, a visible light-activated resin, and a microwave-activated acrylic resin. Two simple methods for measuring dimensional accuracy were used: (1) weight of impression material entrapped between the base and master die and (2) measurement of the posterior border gap at five locations. The volume of space between the denture base and the master die was determined by (1) computation and (2) estimation. Statistical analysis (Bartlett, ANOVA and Tukey's Tests) supported the following conclusions: (1) all groups showed a processing contraction, most apparent from buccal flange to buccal flange, (2) the poorest fitting group was processed in a brass flask and a water bath at a temperature which rose from 70 to 100 degrees C, using a heat activated resin (Acron), (3) the visible light activated resin (Triad) produced dentures of intermediate accuracy, as did Acupac 20 when either heat or microwave activated, (4) the two best fitting groups were prepared from a chemically activated resin system using pressure at low heat (PER form), and the resin developed for microwave activation (Acron MC).

  19. Controlled Transdermal Iontophoresis by Polypyrrole/Poly(Acrylic Acid) Hydrogel

    Science.gov (United States)

    Chansai, Phithupha; Sirivat, Anuvat

    2008-03-01

    Transdermal drug delivery system delivers a drug into a body at desired site and rate. The conductive polymer-hydrogel blend between polypyrrole (PPy) doped with anionic drug and poly(acrylic acid) (PAA) were developed as a matrix/carrier of drug for the transdermal drug delivery in which the characteristic releases depend on the electrical field applied. The PAA films and their blend films were prepared by solution casting using ethylene glycol dimethacrylate (EGDMA) as a crosslinking agent. A mechanical blending of PPy particles and PAA matrix was then carried out. Drug diffusions in the blended PPy/PAA hydrogel and the non-blended one were investigated and determined by using a modified Franz-diffusion cell with an acetate buffer, pH 5.5, at 37 0C, for a period of 48 hours to determine the effects of crosslinking ratio and electric field strength. Amounts of the released drug were measured by UV-Visible spectrophotometry. The diffusion coefficient of drug was determined through the Higuchi equation via different conditions, with and without an electric field. Moreover, thermal properties and electrical conductivity of the polypyrrole and drug-loaded polypyrrole were investigated by means of the thermogravimetric analysis and by using a two-point probe meter, respectively.

  20. Interaction of photosensitive surfactant with DNA and poly acrylic acid

    Energy Technology Data Exchange (ETDEWEB)

    Zakrevskyy, Yuriy, E-mail: yuriy.zakrevskyy@fh-koeln.de; Paasche, Jens; Lomadze, Nino; Santer, Svetlana, E-mail: santer@uni-potsdam.de [Experimental Physics, Institute of Physics and Astronomy, University of Potsdam, Karl-Liebknecht-Str. 24-25, D-14476 Potsdam (Germany); Cywinski, Piotr; Cywinska, Magdalena; Reich, Oliver; Löhmannsröben, Hans-Gerd [Physical Chemistry, Institute of Chemistry, University of Potsdam, Karl-Liebknecht-Str. 24-25, D-14476 Potsdam (Germany)

    2014-01-28

    In this paper, we investigate interactions and phase transitions in polyelectrolyte-surfactant complexes formed between a cationic azobenzene-containing surfactant and two types of polyelectrolytes: natural (DNA) or synthetic (PAA: poly acrylic acid). The construction of a phase diagram allowed distancing between four major phases: extended coil conformation, colloidally stable compacted globules, colloidal instability range, and surfactant-stabilized compact state. Investigation on the complexes’ properties in different phases and under irradiation with UV light provides information about the role of the surfactant's hydrophobic trans isomers both in the formation and destruction of DNA and PAA globules as well as in their colloidal stabilization. The trans isomer shows much stronger affinity to the polyelectrolytes than the hydrophilic cis counterpart. There is no need for complete compensation of the polyelectrolyte charges to reach the complete compaction. On contrary to the findings previously reported in the literature, we demonstrate – for the first time – complete polyelectrolyte compaction which occurs already at 20% of DNA (and at 50% of PAA) charge compensation. The trans isomer plays the main role in the compaction. The aggregation between azobenzene units in the photosensitive surfactant is a driving force of this process. The decompaction can be realized during UV light irradiation and is strongly influenced by the interplay between surfactant-surfactant and surfactant-DNA interactions in the compacted globules.

  1. Interaction of photosensitive surfactant with DNA and poly acrylic acid

    Science.gov (United States)

    Zakrevskyy, Yuriy; Cywinski, Piotr; Cywinska, Magdalena; Paasche, Jens; Lomadze, Nino; Reich, Oliver; Löhmannsröben, Hans-Gerd; Santer, Svetlana

    2014-01-01

    In this paper, we investigate interactions and phase transitions in polyelectrolyte-surfactant complexes formed between a cationic azobenzene-containing surfactant and two types of polyelectrolytes: natural (DNA) or synthetic (PAA: poly acrylic acid). The construction of a phase diagram allowed distancing between four major phases: extended coil conformation, colloidally stable compacted globules, colloidal instability range, and surfactant-stabilized compact state. Investigation on the complexes' properties in different phases and under irradiation with UV light provides information about the role of the surfactant's hydrophobic trans isomers both in the formation and destruction of DNA and PAA globules as well as in their colloidal stabilization. The trans isomer shows much stronger affinity to the polyelectrolytes than the hydrophilic cis counterpart. There is no need for complete compensation of the polyelectrolyte charges to reach the complete compaction. On contrary to the findings previously reported in the literature, we demonstrate - for the first time - complete polyelectrolyte compaction which occurs already at 20% of DNA (and at 50% of PAA) charge compensation. The trans isomer plays the main role in the compaction. The aggregation between azobenzene units in the photosensitive surfactant is a driving force of this process. The decompaction can be realized during UV light irradiation and is strongly influenced by the interplay between surfactant-surfactant and surfactant-DNA interactions in the compacted globules.

  2. Rat hindlimb joint immobilization with acrylic resin orthoses

    Directory of Open Access Journals (Sweden)

    C.A. da Silva

    2006-07-01

    Full Text Available The objective of the present study was to propose an orthosis of light material that would be functional for the animal and that would maintain only the ankle joint immobilized. Male Wistar rats (3 to 4 months old, 250-300 g were divided into 2 groups (N = 6: control and immobilized for 7 days. Rats were anesthetized with sodium pentobarbital (40 mg/kg weight and the left hindlimb was immobilized with the orthoses composed of acrylic resin model, abdominal belt and lateral supports. The following analyses were performed: glycogen content of the soleus, extensor digitorum longus, white gastrocnemius, red gastrocnemius, and tibialis anterior muscles by the phenol sulfuric method, and the weight, fiber area and intramuscular connective tissue of the soleus by the planimetric system. Data were analyzed statistically by the Kolmogorov-Smirnov, Student t and Wilcoxon tests. Immobilization decreased glycogen in all muscles (P < 0.05; soleus: 31.6%, white gastrocnemius: 56.6%, red gastrocnemius: 39%, extensor digitorum longus: 41.7%, tibialis anterior: 45.2% in addition to reducing soleus weight by 34% (P < 0.05. Furthermore, immobilization promoted reduction of the fiber area (43%, P < 0.05 and increased the connective tissue (200%, P < 0.05. The orthosis model was efficient comparing with another alternative immobilization model, like plaster casts, in promoting skeletal muscle alterations, indicating that it could be used as a new model in other studies related to muscle disuse.

  3. Synthesis, characterization and antimicrobial activity of important heterocyclic acrylic copolymers

    Directory of Open Access Journals (Sweden)

    2008-10-01

    Full Text Available The acrylate monomer, 7-acryloyloxy-4-methyl coumarin (AMC has been synthesized by reacting 7-hydroxy-4-methyl coumarin, with acryloyl chloride in the presence of NaOH at 0–5°C. Copolymers of 7-acryloyloxy-4-methyl coumarin (AMC with vinyl acetate (VAc were synthesized in DMF (dimethyl formamide solution at 70±1°C using 2,2′-azobisisobutyronitrile (AIBN as an initiator with different monomer-to-monomer ratios in the feed. The copolymers were characterized by Fourier transform infra red (FTIR spectroscopy. The copolymer composition was evaluated by 1H-NMR (proton nuclear magnetic resonance and was further used to determine reactivity ratios. The monomer reactivity ratios for AMC (M1-VAc (M2 pair were determined by the application of conventional linearization methods such as Fineman-Ross (r1 = 0.6924; r2 = 0.6431, Kelen-Tüdõs (r1 = 0.6776; r2 = 0.6374 and extended Kelen-Tüdõs (r1 = 0.6657; r2 = 0.6256. Thermo gravimetric analysis showed that thermal decomposition of the copolymers occurred in single stage in the temperature range of 263–458°C. The molecular weights of the polymers were determined using gel permeation chromatography. The homo and copolymers were tested for their antimicrobial properties against selected microorganisms.

  4. Strategic design and fabrication of acrylic shape memory polymers

    Science.gov (United States)

    Park, Ju Hyuk; Kim, Hansu; Ryoun Youn, Jae; Song, Young Seok

    2017-08-01

    Modulation of thermomechanics nature is a critical issue for an optimized use of shape memory polymers (SMPs). In this study, a strategic approach was proposed to control the transition temperature of SMPs. Free radical vinyl polymerization was employed for tailoring and preparing acrylic SMPs. Transition temperatures of the shape memory tri-copolymers were tuned by changing the composition of monomers. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses were carried out to evaluate the chemical structures and compositions of the synthesized SMPs. The thermomechanical properties and shape memory performance of the SMPs were also examined by performing dynamic mechanical thermal analysis. Numerical simulation based on a finite element method provided consistent results with experimental cyclic shape memory tests of the specimens. Transient shape recovery tests were conducted and optical transparence of the samples was identified. We envision that the materials proposed in this study can help develop a new type of shape-memory devices in biomedical and aerospace engineering applications.

  5. [Comparative analysis of tissue reaction to acrylic resin materials in studies on Wistar strain rats].

    Science.gov (United States)

    Sobolewska, E

    1999-01-01

    The study takes up the issue of assessing rat tissue reaction to operatively inserted implants of different acrylic resin materials used in prosthetic dentistry. The materials subjected to analysis were polyacrylics: Vertex Soft, Vertex R.S., Vertex S.C., Superacryl and silicone material Molloplast B. The prolongation of life and the dynamic development of prosthetic treatment have caused removable dentures to be used longer and among more people. Polymerised acrylic resin material of these dentures is a potential pathogenic factor to the oral cavity mucosa which is in contact with it. As many as 20 to 70% of patients using removable acrylic dentures suffer from prosthetic stomatopathy. It is considered that the mucosa irritation may be caused by denture trauma, a mycotic infection or toxic action of some components of acrylic materials. Therefore the use of new generation acrylic materials in producing prosthetic dentures needs a precise assessment of undesirable local and systemic effects. A comparative analysis of the effect of correctly polymerised acrylic material on rat mucosa, parotid glands and lymphatic nodes was carried out. Systemic toxicity of these materials was assessed. Acrylic plates were prepared from the most often used acrylic resin materials in the Department of Prosthetic Dentistry PAM and a silicone material (these materials were polymerised precisely according to the producers instruction). Before implantation the plates underwent a thermodynamic analysis in order to ensure that the polymerisation process was carried out correctly and to determine thermal resistance of particular materials. Next sterile acrylic plates were implanted in rats under general anaesthesia. The animals were divided into 6 groups, 10 rats each. In four groups acrylic plates were implanted, in one group silicone material plates were implanted and it represented the comparative group, in one control group an incision of the buccal mucosa was made. The rats were

  6. Preparation and space charge accumulation characteristics of acrylate-grafted polyethylenes using reaction extrusion; Hanno oshidashi ni yoru acrylate polyethylene no seizo to kukan denka chikuseki tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.; Okamoto, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Suh, K. [Korea University, Seoul (Korea, Republic of)

    1998-10-01

    Space charge accumulation characteristics of chemically modified polyethylenes which were grafted with acrylates like acrylic acid and n-butylacrylate using reactive extrusion were investigated. In LDPE-g-Acrylic Acid (LDPE-g-AA), it was showed that the heterocharge found in low-density polyethylenes (LDPE) decreased with the increase of acrylic acid graft ratio and changed to the homocharge formation above 0.1 wt% due to the introduction of carbonyls. Conduction currents and charge mobilities of LDPE-g-AA decreased with the increase of AA graft ratio, while the conduction mechanism remains unchanged. However, in the LDPE-g-n-Buthylacrylate (LDPE-g-nBA), the change of space charge accumulation characteristics were not observed and charge mobilities of them not affected by the graft ratio. The differences of space charge formation between two grafted polyethylenes were closely related to the ability of trap site in monomer grafted to LDPE and the chemical structure of it. 18 refs., 11 figs.

  7. Findings of an experimental study in a rabbit model on posterior capsule opacification after implantation of hydrophobic acrylic and hydrophilic acrylic intraocular lenses

    Directory of Open Access Journals (Sweden)

    Nikolaos Trakos

    2009-01-01

    Full Text Available Nikolaos Trakos1, Elli Ioachim2, Elena Tsanou2, Miltiadis Aspiotis1, Konstantinos Psilas1, Chris Kalogeropoulos11University Eye Clinic of Ioannina, Ioannina, Greece; 2Pathology Department, University of Ioannina, Ioannina, GreecePurpose: Study on cell growth on the posterior capsule after implantation of hydrophobic acrylic (Acrysof SA 60 AT and hydrophilic acrylic (Akreos Disc intraocular lenses (IOL in a rabbit model and comparison of posterior capsule opacification (PCO.Methods: Phacoemulsification was performed in 22 rabbit eyes, and two different IOL types (Acrysof SA60 AT and Akreos Disc were implanted. These IOLs had the same optic geometry (square edged but different material and design. Central PCO (CPCO, peripheral PCO (PPCO, Sommering’s ring (SR formation, type of growth, extension of PCO, cell type, inhibition, and fibrosis were evaluated three weeks after surgery. Histological sections of each globe were prepared to document the evaluation of PCO.Results: No statistically significant difference was observed between a hydrophobic acrylic IOL and a hydrophilic acrylic IOL in relation to the CPCO, PPCO, type of growth, extension, cell type, inhibition, and fibrosis. Statistically significant difference was observed in relation to the formation of SR with Acrysof SA 60 AT group presenting more SR than Akreos Disc group.Conclusion: PCO was not influenced by the material of the IOL or the design of the haptics of the IOLs we studied.Keywords: posterior capsule opacification, intraocular lenses, rabbit model

  8. Effect of repeated immersion solution cycles on the color stability of denture tooth acrylic resins

    Directory of Open Access Journals (Sweden)

    Paulo Maurício Batista da Silva

    2011-12-01

    Full Text Available OBJECTIVE: Chemical solutions have been widely used for disinfection of dentures, but their effect on color stability of denture tooth acrylic resins after repeated procedures is still unclear. The aim of this in vitro study was to evaluate whether repeated cycles of chemical disinfectants affected the color stability of two denture tooth acrylic resins. MATERIAL AND METHODS: Sixty disc-shaped specimens (40 mm x 3 mm were fabricated from two different brands (Artiplus and Trilux of denture tooth acrylic resin. The specimens from each brand (n=30 were randomly divided into 6 groups (n=5 and immersed in the following solutions: distilled water (control group and 5 disinfecting solutions (1% sodium hypochlorite, 2% sodium hypochlorite, 5.25% sodium hypochlorite, 2% glutaraldehyde, and 4% chlorhexidine gluconate. Tooth color measurements were made by spectrophotometry. Before disinfection, the initial color of each tooth was recorded. Further color measurements were determined after subjecting the specimens to 7, 21, 30, 45, 60, and 90 immersion cycles in each tested solution. Color differences (ΔE* were determined using the CIE L*a*b* color system. Data were analyzed using two-way repeated measures analysis of variance (ANOVA followed by Tukey tests. The significance level was set at 5%. RESULTS: There were statistically significant differences in ΔE* among the 5 disinfectants and water during the 90 cycles of immersion for both denture tooth acrylic resins. Distilled water promoted the greatest color change in both denture tooth acrylic resins, nevertheless none of tested disinfectants promoted ΔE* values higher than 1.0 on these acrylic materials during the 90 cycles of disinfection. CONCLUSIONS: Repeated immersion cycles in disinfecting solutions alter ΔE* values, however these values do not compromise the color of the tested denture tooth acrylic resins because they are imperceptible to the human eye.

  9. Comparative evaluation of surface porosities in conventional heat polymerized acrylic resin cured by water bath and microwave energy with microwavable acrylic resin cured by microwave energy

    Directory of Open Access Journals (Sweden)

    Sunint Singh

    2013-01-01

    Full Text Available Background: Conventional heat cure poly methyl methacrylate (PMMA is the most commonly used denture base resin despite having some short comings. Lengthy polymerization time being one of them and in order to overcome this fact microwave curing method was recommended. Unavailability of specially designed microwavable acrylic resin made it unpopular. Therefore, in this study, conventional heat cure PMMA was polymerized by microwave energy. Aim and Objectives: This study was designed to evaluate the surface porosities in PMMA cured by conventional water bath and microwave energy and compare it with microwavable acrylic resin cured by microwave energy. Materials and Methods: Wax samples were obtained by pouring molten wax into a metal mold of 25 mm × 12 mm × 3 mm dimensions. These samples were divided into three groups namely C, CM, and M. Group C denotes conventional heat cure PMMA cured by water bath method, CM denotes conventional heat cure PMMA cured by microwave energy, M denotes specially designed microwavable acrylic denture base resin cured by microwave energy. After polymerization, each sample was scanned in three pre-marked areas for surface porosities using the optical microscope. As per the literature available, this instrument is being used for the first time to measure the porosity in acrylic resin. It is a reliable method of measuring area of surface pores. Portion of the sample being scanned is displayed on the computer and with the help of software area of each pore was measured and data were analyzed. Results: Conventional heat cure PMMA samples cured by microwave energy showed maximum porosities than the samples cured by conventional water bath method and microwavable acrylic resin cured by microwave energy. Higher percentage of porosities was statistically significant, but well within the range to be clinically acceptable. Conclusion: Within the limitations of this in-vitro study, conventional heat cure PMMA can be cured by

  10. Focal point analysis of torsional isomers of acrylic acid

    Science.gov (United States)

    Alev Çiftçioğlu, Gökçen; Trindle, Carl; Yavuz, Ilhan

    2010-10-01

    The thermochemistry of acrylic acid has presented challenges owing to its high reactivity, tendency to dimerize in the gas phase, and the existence of two very nearly equal energy conformational isomers. Well-tested thermochemical schemes including G2, G3, G4, and CBS-QB3 agree in the prediction that the s-cis syn structure is the most stable of the torsional isomers, with the s-cis anti form lying 3 kJ mol-1 or less higher in energy. Microwave spectra suggest a value of 0.63 kJ mol-1. The energy barrier between these forms is in the neighbourhood of 25 kJ mol-1 according to a MP2/cc-pVDZ calculation. We present estimates of the relative energies of all four torsional isomers and the rotational barrier based on a variant of the Focal Point Analysis developed by Császár and co-workers. These calculations, extending to the CCSD(T)/cc-pV5Z level, predict that the s-cis anti torsional isomer is the most stable form, in contrast to prior estimates. The s-cis syn form lies about 2.9 kJ mol-1 higher, while the s-trans syn and anti forms lie at about 21.7 and 23.3 kJ mol-1, respectively. We estimate the rotational barrier between the s-cis trans and s-cis anti structures to be about 23.9 kJ mol-1. Error ranges derived from the fit to extrapolation forms suggest that our estimates have an uncertainty of about 0.1 kJ mol-1.

  11. Pulse radiolysis of butyl acrylate in aqueous solution

    Science.gov (United States)

    Kujawa, P.; Mohid, N.; Zaman, K.; Manshol, W.; Ulanski, P.; Rosiak, J. M.

    1998-10-01

    The pulse radiolysis of n-butyl acrylate (nBA) in aqueous solution was studied. The rate constant of the reaction of nBA with hydroxyl radicals was calculated as 1.5×10 10 dm 3 mol -1 s -1. The absorption spectrum of the OH ·-nBA adduct appeared to have a broad maximum at 300 nm. This spectrum was attributed to the α-carbon centred radicals. It decayed with the first-order rate constant k=1.5×10 4 s -1 (pH 10.8). The rate constant of the nBA reaction with hydrated electrons was determined as k=1.6×10 10 dm 3 mol -1 s -1. The spectrum of H ·-nBA adduct was similar to that recorded for OH · adduct. It decayed with first-order kinetics at k=1.0×10 4 s -1. Spectra of the electron adduct were characterised by the band with a maximum at 285 nm (pH 10.0) or at 280 nm (pH 4.0) with ɛ=10 500 dm 3 mol -1 cm -1. In acidic solution, radical anion formed upon addition of hydrated electrons to the nBA molecule, undergoes fast, reversible protonation. The decay of the reversibly protonated electron adduct was a second-order process at k=2.5×10 9 dm 3 mol -1 s -1. This reaction took place at the carbonyl oxygen. Slow, irreversible protonation of the electron adduct at high pH takes place at the β-carbon atom at k=2.9×10 4 s -1.

  12. Supercritical water oxidation of acrylic acid production wastewater.

    Science.gov (United States)

    Gong, Y M; Wang, S Z; Tang, X Y; Xu, D H; Ma, H H

    2014-01-01

    Supercritical water oxidation (SCWO) of wastewater from an acrylic acid manufacturing plant has been studied on a continuous flow experimental system, whose reactor was made of Hastelloy C-276. Experimental conditions included a reaction temperature (T) ranging from 673 to 773K, a residence time (t) ranging from 72.7 to 339s, a constant pressure (P) of 25 MPa and a fixed oxidation coefficient (alpha) of 2.0. Experimental results indicated that reaction temperature and residence time had significant influences on the oxidation reaction, and increasing the two operation parameters could improve both degradation of chemical oxygen demand (COD) and ammonia nitrogen (NH3-N). The COD removal efficiency could reach up to 98.73% at 25 MPa, 773 K and 180.1 s, whereas the destruction efficiency of NH3-N was only 43.71%. We further carried out a kinetic analysis considering the induction period through free radical chain mechanism. It confirms that the power-law rate equation for COD removal was 345 exp(-52200/RT)[COD]1.98[O2]0.17 and for NH3-N removal was 500 exp(-64492.19/RT)[NH3-N]1.87 [O2]0.03. Moreover, the induction time formulations for COD and NH3-N were suspected to be exp(38250/RT)/173 and exp(55690/RT)/15231, respectively. Correspondingly, induction time changed from 2.22 to 5.38 s for COD and 0.38 to 1.38 s for NH3-N. Owing to the catalysis of reactor inner wall surface, more than 97% COD removal was achieved in all samples.

  13. Synthesis of Acrylate Microemulsion Modified by Alkoxy Silane

    Institute of Scientific and Technical Information of China (English)

    SUN Zhijuan; ZHANG Xinya; HUANG Hong; FU Heqing; CHEN Huanqin

    2008-01-01

    An acrylate emulsion was modified by adding vinyltriisopropoxy silane (trade name C-1706).By adding the multiple emulsifier which consists of an anionic emulsifier, sodium dodecyl benzene sulfonate(SDBS) and nonionic emulsifier, octyl phenolic divinyl oxide (OP-10), the acryiosilane microemulsiun was synthesized by seeded emulsion polymerization. The influential factors including the kind and the adding amount of emulsifiers and the monomer variety of alkoxy silane and the added methods which influence on the properties of the microemulsion were investigated. It is found that SDBS and OP-10 as multiple emulsifiers with mass ratio of hl and the adding amount of 2.5%-3.5% can act on co-effect for emulsion polymerization. The C-1706 possesses bulky isopropoxy substituent that can reduce hydrolysis reactivity during the polymerization process, So as to not only make the process smoothly but also advance the store stability of the emulsion.Moreover, the latter-addition mode of C-1706 can restrain its hydrolysis activity and polycondensation reaction during the polymerization process of the emulsion. The structure, the film cross section, the particle size and its distribution of the microemulsion were analyzed by the Fourier Transform Infrared Ray Spectrum (FT-IR), Scanning Electron Microscopy (SEM) and a particle size analyzer, respectively. The results show that the particle diameter of the modified microemulsion can be controlled between 50 and 70 nm and its film hardness is 7.3. Only adding 1.5% of C-1706 into the system of emulsion polymerization can apparently improve the weathering resistance of the microemulsion, which undergo degradation with chromatism(△E) is 1.6 after 3 600 hours of QUV-aging.

  14. Acrylic Rubber Latex in Ferrocement for Strengthening Reinforced Concrete Beams

    Directory of Open Access Journals (Sweden)

    D. R. Kumar

    2010-01-01

    Full Text Available Problem statement: In India, the early deterioration of reinforced concrete structures has become a big social problem in recent years. An essential research is needed for the development of effective repair materials and their execution systems comes to an important issue from the viewpoint of the longevity of infrastructures at present. Ferrocement laminates are introduced to enhance the overall performance of Reinforced Concrete (RC structures and these days the use of it is a promising technology for increasing the flexural strength of deficient reinforced concrete members. Approach: The repair system aims to provide quantitative repair enhancement as well as extending the life of deteriorated concrete members. This research in particular inspired the initiation of the present work which aimed to develop a material with unique properties and a very wide range of practical applications. The mechanical properties of mortar through difference in polymer content with Acrilic Latex by ferrocement among three different volume fractions of mesh reinforcement were studied. Following the encouraging progress made in the formulation and evaluation of the polymer modified repair mortar, tests were carried out involving the application of the reinforced repair material to the soffit of the reinforced concrete beams of 3 m length. Results: The levels of damage of the original beams prior to repair did not affect the ultimate load of the strengthened beams tested. The performance of the strengthened beams was compared to the control beams with respect to cracking, deflection and ultimate strength which confirm preeminent results. Conclusion: This accomplished the fact that acrylic rubber latex modified ferrocement is a doable alternative strengthening component for the rehabilitation of reinforced concrete structures. Further developments in these systems will create dramatic improvement into the field of rehabilitation of old privileged structures.

  15. Surface morphology changes of acrylic resins during finishing and polishing phases

    Directory of Open Access Journals (Sweden)

    Glaucio Serra

    2013-12-01

    Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

  16. Direct Synthesis of Hyperbranched Poly(acrylic acid-co-3-hydroxypropionate

    Directory of Open Access Journals (Sweden)

    Efkan Çatıker

    2015-01-01

    Full Text Available Hyperbranched poly(acrylic acid-co-3-hydroxypropionate (PAcHP was synthesized by base-catalyzed hydrogen transfer polymerization of acrylic acid through one step. The copolymers obtained through solution and bulk polymerization were insoluble in water and all organic solvents tried. Structural and compositional characterizations of hyperbranched PAcHP were performed by using FTIR, solid 13C-NMR, TGA, and titrimetric analysis. Acrylate fraction of the hyperbranched PAcHP obtained via bulk polymerization was determined as 60–65% by comparing TGA curves of hyperbranched PAcHP and pure poly(3-hydroxy propionate (PHP. However, analytical titration of the same sample revealed that acrylic acid units were about 47.3%. The results obtained from TGA and analytical titration were used to evaluate the chemical structure of the copolymer. Hyperbranched PAcHP exhibited hydrogel properties. Swelling behavior of the copolymer was investigated at a wide pH range and ionic strength. The dynamic swelling profiles of hyperbranched PAcHP exhibited a fast swelling behavior in the first hour and achieved the equilibrium state within 12 h in PBS. Depending on the conditions, the copolymers exhibited swelling ratios up to 2100%. As the copolymer has easily biodegradable propionate and versatile functional acrylic acid units, it can be used as not only biodegradable material in medical applications but also raw material in personal care commodities.

  17. Acrylic/CDP混纺织物染色同色性探讨

    Institute of Scientific and Technical Information of China (English)

    刘姗; 张贵; 王思捷

    2015-01-01

    采用常用的阳离子染料分别对Acrylic/CDP混纺织物进行一浴法染色,测试染色织物K/S值,同色平衡值K及色差△E,筛选出染Acrylic/CDP混纺织物同色性好的三原色染料,即TR阳离子黄、TR阳离子红和TR阳离子蓝。将筛选出的三原色在不同温度下进行染色,找出Acrylic/CDP混纺织物染色同色性好的温度。结果显示:在105~110℃之间,Acrylic/CDP混纺织物的染色同色性好;另外,匀染剂M的使用也可以有效地提高其Acrylic/CDP混纺织物染色同色性。

  18. Electrically conducting silver/guar gum/poly(acrylic acid) nanocomposite.

    Science.gov (United States)

    Abdel-Halim, E S; Al-Deyab, Salem S

    2014-08-01

    This article describes the synthesis of an electrically conducting silver/guar gum/poly(acrylic acid) nanocomposite hydrogel. The synthesis process started with grafting acrylic acid monomers onto the natural polymer guar gum by the use of ammonium persulphate as a free radical initiator in acid medium. Guar gum/poly(acrylic acid) graft copolymer was separated from the polymerization medium, purified and subjected to crosslinking treatment, using alkaline epichlorohydrin as a crosslinking agent. Silver nitrate solution was added during the crosslinking treatment in varying concentrations, that the reaction conditions affect crosslinking of guar gum/poly(acrylic acid) graft copolymer to a hydrogel, as well as reduction of silver nitrate to silver nanoparticles, giving rise to the formation of silver/guar gum/poly(acrylic acid) nanocomposite. Factors affecting the grafting reaction as well as those affecting the crosslinking/reduction treatment were optimized. The so synthesized nanocomposite hydrogel samples were fully characterized, regarding their contents of silver nanoparticles and swelling ratio. The electrical conductivity of the nanocomposite hydrogel was studied and it was found to be affected by the swelling ratio of the hydrogel as well as its content of silver nanoparticles.

  19. Synthesis by Solution Polymerization of Polybehenyl Acrylate as Pour Point Depressant for Crude Oil

    Institute of Scientific and Technical Information of China (English)

    Song Zhaozheng; Ge Jijiang

    2004-01-01

    Behenyl acrylate is a kind of highly efficient pour point depressants. In order to promote the application of the pour pint depressant in transportation of crude oils, polybehenyl acrylate was synthesized by solution polymerization. These conclusions can be drawn from the experimental results that the sequence of chain transfer constants of four solvents is arranged in the following decreasing order: carbon tetrachloride (6.0×10-5)>chloroform (2.8×10-5)>methylbenzene (2.5×10-5)>tetrachloroethane (1.6×10-5). The average molecular weight of polybehenyl acrylate mainly depends on the chain transfer constant of the solvents. However, if the monomer conversion was higher than 35%, an abnormal phenomenon occurred, resulting in higher average molecular weight of polybehenyl acrylate obtained in methylbenzene solution compared to that obtained in tetrachloroethane solution. It was attributed to the influence of gelation on the average molecular weight of polybehenyl acrylate, which was stronger than the impact of chain transfer in methylbenzene.

  20. Comparison of impact strength of acrylic resin reinforced with kevlar and polyethylene fibres.

    Science.gov (United States)

    Kamath, G; Bhargava, K

    2002-01-01

    The present study was done to evaluate the impact strengths of heat-activated acrylic resins reinforced with Kevlar fibres, polyethylene fibres and unreinforced heat activated acrylic resin. Each of three groups had 25 specimens. Brass rods of uniform length of 40 mm and diameter of 8 mm were used to prepare the moulds. A combination of long fibres (40 mm length) and short fibres (6 mm length) were used. The total amount of fibres incorporated was limited to 2% by weight of the resin matrix. Short and long fibres of equal weight were incorporated. The short fibres were mixed with polymer and monomer and packed into the mould, while, the long axis of the specimen, perpendicular to the applied force. The specimens were then processed. Impact strength testing was done on Hounsfield's impact testing machine. Kevlar fibre reinforced heat activated acrylic resin specimens recorded higher mean impact strength of 0.8464 Joules, while polyethylene fibres reinforced heat activated acrylic resin recorded mean impact strength of 0.7596 joules. The unreinforced heat activated acrylic resin recorded mean impact strength of 0.3440 Joules.

  1. The electrospinning of the copolymer of styrene and butyl acrylate for its application as oil absorbent.

    Science.gov (United States)

    Xu, Naiku; Cao, Jipeng; Lu, Yuyao

    2016-01-01

    Electrospun polystyrene materials have been employed as oil absorbents, but they have visible drawbacks such as poor strength at low temperature and unreliable integrity because of brittleness and insufficient cohesive force among fibers. Butyl acrylate can polymerize into flexible chains, and its polymer can be used as elastomer and adhesive material. Thereby it is possible to obtain the material that has better performance in comparison with electrospun polystyrene material through the electrospinning of the copolymer of styrene and butyl acrylate. In this work, a polymer was synthesized through suspension polymerization by using styrene and butyl acrylate as comonomers. The synthesis of the copolymer of styrene and butyl acrylate was verified through dissolution and hydrolysis experimental data; as well through nuclear magnetic resonance spectrometry. The viscous flow activation energy of the solution consisting of copolymer and N, N-dimethylformamide was determined via viscosity method and then adopted to establish the entanglement characteristics of butyl acrylate's chain segments. Finally, in order to electrospin the copolymer solution into fibrous membrane, the effects of monomer feed ratio and spinning parameters were investigated. The prepared fibrous membrane was found to have a potential use as oil absorbent.

  2. Synthesis of a novel acrylated abietic acid-g-bacterial cellulose hydrogel by gamma irradiation.

    Science.gov (United States)

    Abeer, Muhammad Mustafa; Amin, Mohd Cairul Iqbal Mohd; Lazim, Azwan Mat; Pandey, Manisha; Martin, Claire

    2014-09-22

    Acrylated abietic acid (acrylated AbA) and acrylated abietic acid-grafted bacterial cellulose pH sensitive hydrogel (acrylated AbA-g-BC) were prepared by a one-pot synthesis. The successful dimerization of acrylic acid (AA) and abietic acid (AbA) and grafting of the dimer onto bacterial cellulose (BC) was confirmed by 13C solid state NMR as well as FT-IR. X-ray diffraction analysis showed characteristic peaks for AbA and BC; further, there was no effect of increasing amorphous AA content on the overall crystallinity of the hydrogel. Differential scanning calorimetry revealed a glass transition temperature of 80°C. Gel fraction and swelling studies gave insight into the features of the hydrogel, suggesting that it was suitable for future applications such as drug delivery. Scanning electron microscopy observations showed an interesting interpenetrating network within the walls of hydrogel samples with the lowest levels of AA and gamma radiation doses. Cell viability test revealed that the synthesized hydrogel is safe for future use in biomedical applications.

  3. Cast Partial Denture versus Acrylic Partial Denture for Replacement of Missing Teeth in Partially Edentulous Patients

    Directory of Open Access Journals (Sweden)

    Pramita Suwal

    2017-03-01

    Full Text Available Aim: To compare the effects of cast partial denture with conventional all acrylic denture in respect to retention, stability, masticatory efficiency, comfort and periodontal health of abutments. Methods: 50 adult partially edentulous patient seeking for replacement of missing teeth having Kennedy class I and II arches with or without modification areas were selected for the study. Group-A was treated with cast partial denture and Group-B with acrylic partial denture. Data collected during follow-up visit of 3 months, 6 months, and 1 year by evaluating retention, stability, masticatory efficiency, comfort, periodontal health of abutment. Results: Chi-square test was applied to find out differences between the groups at 95% confidence interval where p = 0.05. One year comparison shows that cast partial denture maintained retention and stability better than acrylic partial denture (p< 0.05. The masticatory efficiency was significantly compromising from 3rd month to 1 year in all acrylic partial denture groups (p< 0.05. The comfort of patient with cast partial denture was maintained better during the observation period (p< 0.05. Periodontal health of abutment was gradually deteriorated in all acrylic denture group (p

  4. Effects of Chairside Polishing and Brushing on Surface Roughness of Acrylic Denture Base Resins

    Institute of Scientific and Technical Information of China (English)

    Seung-Kyun Kim; Ju-Mi Park; Min-Ho Lee; Jae-Youn Jung; Shipu Li; Xinyu Wang

    2009-01-01

    The effects of 3 chairside polishing kits and mechanical brushing on the surface roughness of 3 different acrylic denture base resins were compared. Acrylic denture base resins (auto-polymerizing, heat-polymerizing, injected heat-polymerizing resins) were examined after a tungsten carbide bur, and after chairside polishing using 3 polishing kits and pumice. The specimens were subjected to mechanical brushing using a wear tester to simulate 30 000 strokes of brushing. The surface roughness of the acrylic denture base resin specimens was measured using a contact pro-filometer. After the test, the random polished acrylic resins were evaluated by scanning electron mi-croscopy (SEM) and atomic force microscopy (AFM). Acrylic denture base resins polished using the 3 types of polishing kits had a smoother surface than those finished with the tungsten carbide bur (p <0.05). The surface of the resin polished by a TC cutter exceeded the Ra of 0.2 μm (p<0.05). The auto-polymerizing resin showed a significantly higher surface roughness than the heat-polymerizing resin and injected heat-polymerizing resin (p>0.05). In the case of polishing step wise, there was almost no change in surface roughness after brushing (p>0.05).

  5. Do flexible acrylic resin lingual flanges improve retention of mandibular complete dentures?

    Science.gov (United States)

    Ahmed Elmorsy, Ayman Elmorsy; Ahmed Ibraheem, Eman Mostafa; Ela, Alaa Aboul; Fahmy, Ahmed; Nassani, Mohammad Zakaria

    2015-01-01

    The aim of this study was to compare the retention of conventional mandibular complete dentures with that of mandibular complete dentures having lingual flanges constructed with flexible acrylic resin "Versacryl." The study sample comprised 10 completely edentulous patients. Each patient received one maxillary complete denture and two mandibular complete dentures. One mandibular denture was made of conventional heat-cured acrylic resin and the other had its lingual flanges made of flexible acrylic resin Versacryl. Digital force-meter was used to measure retention of mandibular dentures at delivery and at 2 weeks and 45 days following denture insertion. The statistical analysis showed that at baseline and follow-up appointments, retention of mandibular complete dentures with flexible lingual flanges was significantly greater than retention of conventional mandibular dentures (P dentures, retention of dentures increased significantly over the follow-up period (P complete dentures improved denture retention.

  6. In vitro release of doxycycline from bioabsorbable materials and acrylic strips

    DEFF Research Database (Denmark)

    Larsen, T

    1990-01-01

    Treatment of marginal periodontitis may include use of local antibiotics. In the present in vitro study the bioabsorbable materials Surgicel, Tissell, and CollaCote and acrylic strips were examined for release of doxycycline into liquids and residual antibacterial activity of the materials. Pieces...... high concentrations and level of residual activity. The acrylic strip and CollaCote decreased to low levels of both concentration and residual activity in a few days. Tissell was intermediate with a continuous decrease in concentration but rather high level of residual activity throughout the study....... In serum the acrylic strip was partly dissolved and Surgicel was totally dissolved after 2 days. Left undisturbed in serum Surgicel was not dissolved for 2 weeks. These results indicate that Surgicel and Tissel may be capable of prolonged release of doxycycline in vivo....

  7. Catalytic production of methyl acrylates by gold-mediated cross coupling of unsaturated aldehydes with methanol

    Science.gov (United States)

    Karakalos, Stavros; Zugic, Branko; Stowers, Kara J.; Biener, Monika M.; Biener, Juergen; Friend, Cynthia M.; Madix, Robert J.

    2016-10-01

    Modern methods of esterification, one of the most important reactions in organic synthesis, are reaching their limits, as far as waste and expense are concerned. Novel chemical approaches to ester formation are therefore of importance. Here we report a simple procedure free of caustic reagents or byproducts for the facile direct oxidative methyl esterification of aldehydes over nanoporous Au catalysts. Complementary model studies on single crystal gold surfaces establish the fundamental reactions involved. We find that methanol more readily reacts with adsorbed active oxygen than do the aldehydes, but that once the aldehydes do react, they form strongly-bound acrylates that block reactive sites and decrease the yields of acrylic esters under steady flow conditions at 420 K. Significant improvements in yield can be achieved by operating at higher temperatures, which render the site-blocking acrylates unstable.

  8. Hybrid thiol-ene network nanocomposites based on multi(meth)acrylate POSS.

    Science.gov (United States)

    Li, Liguo; Liang, Rendong; Li, Yajie; Liu, Hongzhi; Feng, Shengyu

    2013-09-15

    First, multi(meth)acrylate functionalized POSS monomers were synthesized in this paper. Secondly, FTIR was used to evaluate the homopolymerization behaviors of multi(meth)acrylate POSS and their copolymerization behaviors in the thiol-ene reactions with octa(3-mercaptopropyl) POSS in the presence of photoinitiator. Results showed that the photopolymerization rate of multimethacrylate POSS was faster than that of multiacrylate POSS. The FTIR results also showed that the copolymerizations were dominant in the thiol-ene reactions with octa(3-mercaptopropyl) POSS, different from traditional (meth)acrylate-thiol system, in which homopolymerizations were predominant. Finally, the resulted hybrid networks based on POSS were characterized by XRD, FE-SEM, DSC, and TGA. The characterization results showed that hybrid networks based on POSS were homogeneous and exhibited high thermal stability.

  9. Synthesis of urethane acrylates modified by linseed oil and study on EBC coatings

    Science.gov (United States)

    Xuecheng, Ju; Hongfei, Ha; Bo, Jiang; Yong, Zhou

    1999-11-01

    In this paper, five different structural urethane acrylates modified by linseed oil were synthesized and then properties of their electron beam cured (EBC) coatings, i.e., adhesion, gloss, flexibility, impact resistance, hardness, tensile strength and elongation were studied. It was shown that these synthesizing conditions of urethane acrylates modified by linseed oil were temperate. Effect of structure of urethane acrylates modified by linseed oil on these properties of their EBC coatings was obvious, except gloss. According to synthetical properties of EBC coatings, the optimum oligomer among these was No. A, whose main chains were formed by hexane diacid, average functionality was 2, and oil content was 25.5%. With increasing of absorbed doses, these properties of EBC coatings, except gloss, changed correspondingly. It was advisable that absorbed dose wasn't greater than 180 kGy. At higher absorbed doses, cobaltous naphthenate had obvious effect on these properties of EBC coatings, whose oil content of linseed oil was rather high.

  10. Gold Nanoparticles Protected with Thiol-Derivatized Amphiphilic Poly( -caprolactone)-b-poly(acrylic acid)

    DEFF Research Database (Denmark)

    Javakhishvili, Irakli; Hvilsted, Søren

    2008-01-01

    Amphiphilic poly(c-caprolactone)-b-poly(acrylic acid) (HS-PCL-b-PAA) bearing thiol functionality at the PCL terminal has been synthesized by a combination of ring-opening polymerization (ROP) of c-caprolactone (c-CL), esterification of hydroxy chain end with protected mercaptoacetic acid, subsequ......Amphiphilic poly(c-caprolactone)-b-poly(acrylic acid) (HS-PCL-b-PAA) bearing thiol functionality at the PCL terminal has been synthesized by a combination of ring-opening polymerization (ROP) of c-caprolactone (c-CL), esterification of hydroxy chain end with protected mercaptoacetic acid......, subsequent chain-extension by atom transfer radical polymerization (ATRP) of tert-butyl acrylate (tBA), and final deprotection steps. ROP of c-CL initiated by 2-hydroxyethyl 2-bromoisobutyrate, and catalysed by tin octoate afforded Br-PCL-OH with the degree of polymerization of 30 and narrow molecular weight...

  11. Synthesis of radiation crosslinked poly(acrylic acid) in the presence of phenyltriethoxysilane

    Science.gov (United States)

    Hassan, Safia; Yasin, Tariq

    2014-04-01

    Acrylic acid based superabsorbent hydrogel was prepared using phenyltriethoxysilane (PTES) as polyfunctional monomer. Different amounts of PTES were incorporated in acrylic acid and irradiated at different doses upto maximum of 30 kGy. The crosslinked acrylic acid showed hydrogel properties and its swelling kinetics, gel fraction and equilibrium degree of swelling (EDS) were studied. It was found that the increased PTES concentration decreased the EDS of the hydrogels. Infrared spectroscopy confirmed the crosslinking reaction between the feed components and the existence of siloxane bond. Thermogravimetric analysis showed an increase in the stability of the hydrogels having high PTES content. The swelling of the hydrogel was affected by pH, ionic strength and temperature. These hydrogels showed low swelling in acidic and basic pH range and high swelling around neutral pH. This switchable pH response of these hydrogels can be exploited in environmental and biomedical applications.

  12. Haptic Breakage after Transscleral Fixation of a Single-Piece Acrylic Intraocular Lens

    Directory of Open Access Journals (Sweden)

    Hiroki Tanaka

    2014-07-01

    Full Text Available Purpose: To report the case of a patient with a damaged haptic of an acrylic intraocular lens (IOL after transscleral IOL fixation. Methods: This is a retrospective and descriptive case report. Results: A 40-year-old man presented with sudden visual loss in the left eye. He had undergone phacoemulsification/aspiration and IOL implantation 3 years previously and IOL repositioning with transscleral fixation 2 years before the initial visit. His visual acuity was 0.3 in the left eye due to corneal edema caused by a foreign body, i.e., the severed haptic tip of the single-piece acrylic IOL, which was surgically removed. The IOL itself was tilted and therefore explanted. The surface of the tip of the haptic suggested that the monofilament suture thread had exerted continuous force across the haptic. Conclusions: The haptics of acrylic IOLs can be damaged after transscleral fixation.

  13. APPLICATION OF DIRECT CONTACT TEST IN EVALUATION OF CYTOTOXICITY OF ACRYLIC DENTURE BASE RESINS

    Directory of Open Access Journals (Sweden)

    Milena Kostić

    2012-03-01

    Full Text Available The use of acrylic denture base resins is widely spread in dental practice. They belong to the group of biomaterials due to their role of morphological and functional substituent in the mouth. However, clinical practice has shown that some toxic ingredients of these materials may lead to adverse local and even systemic changes. The aim of the study was to evaluate cytotoxic effect of various denture base resins on cell culture using direct contact test. The effect of four different acrylic materials on HeLa cell structure was evaluated. Upon light microscopy analysis, MTT test was performed without previous removal of material samples. The obtained values of MTT indicate that cell proliferation is dependant on the type of acrylic denture base resins. Cold polymerization denture base resins showed mild inhibitory effect on the cell culture growth. The signs of toxicity were not observed in heat polymerization denture base resins.

  14. Optical contouring of an acrylic surface for non-intrusive diagnostics in pipe-flow investigations

    Science.gov (United States)

    de Witt, Benjamin J.; Coronado-Diaz, Haydee; Hugo, Ronald J.

    2008-07-01

    In this work, an acrylic surface was optically contoured to correct for the optical distortion caused by a transparent pipe wall. This method can be applied to non-invasive viewing/imaging techniques for fluid flow experiments. Software tools were developed to aid in the design of an optically contoured acrylic test section for pipe-flow experiments. Numerical models were computed for a standard acrylic pipe, inner diameter 57.15 mm, with water enclosed. An optical contour prototype was machined on a 5-axis CNC machine, and polished with 1-15 μm diamond paste, alleviating any surface imperfections without significantly altering the contoured surface. Experiments were then performed to measure the emerging optical wavefront and was found to emerge planar when utilizing the optical contour. It was determined that the wavefront was corrected to within ten wavelengths of a Helium-Neon (He-Ne) laser beam.

  15. Synthesis of acrylic and allylic bifunctional cross-linking monomers derived from PET waste

    Science.gov (United States)

    Cruz-Aguilar, A.; Herrera-González, A. M.; Vázquez-García, R. A.; Navarro-Rodríguez, D.; Coreño, J.

    2013-06-01

    An acrylic and two novel allylic monomers synthesized from bis (hydroxyethyl) terephthalate, BHET, are reported. This was obtained by glycolysis of post-consumer PET with boiling ethylene glycol. The bifunctional monomer bis(2-(acryloyloxy)ethyl) terephthalate was obtained from acryloyl chloride, while the allylic monomers 2-(((allyloxi)carbonyl)oxy) ethyl (2-hydroxyethyl) terephthalate and bis(2-(((allyloxi)carbonyl)oxy)ethyl) terephthalate, from allyl chloroformate. Cross-linking was studied in bulk polymerization using two different thermal initiators. Monomers were analyzed by means of 1H NMR and the cross-linked polymers by infrared spectroscopy. Gel content higher than 90% was obtained for the acrylic monomer. In the case of the mixture of the allylic monomers, the cross-linked polymer was 80 % using BPO initiator, being this mixture 24 times less reactive than the acrylic monomer.

  16. Nitrile Hydratase and Amidase from Rhodococcus rhodochrous Hydrolyze Acrylic Fibers and Granular Polyacrylonitriles

    Science.gov (United States)

    Tauber, M. M.; Cavaco-Paulo, A.; Robra, K.-H.; Gübitz, G. M.

    2000-01-01

    Rhodococcus rhodochrous NCIMB 11216 produced nitrile hydratase (320 nkat mg of protein−1) and amidase activity (38.4 nkat mg of protein−1) when grown on a medium containing propionitrile. These enzymes were able to hydrolyze nitrile groups of both granular polyacrylonitriles (PAN) and acrylic fibers. Nitrile groups of PAN40 (molecular mass, 40 kDa) and PAN190 (molecular mass, 190 kDa) were converted into the corresponding carbonic acids to 1.8 and 1.0%, respectively. In contrast, surfacial nitrile groups of acrylic fibers were only converted to the corresponding amides. X-ray photoelectron spectroscopy analysis showed that 16% of the surfacial nitrile groups were hydrolyzed by the R. rhodochrous enzymes. Due to the enzymatic modification, the acrylic fibers became more hydrophilic and thus, adsorption of dyes was enhanced. This was indicated by a 15% increase in the staining level (K/S value) for C.I. Basic Blue 9. PMID:10742253

  17. Evaluation of the level of residual monomer in acrylic denture base materials having different polymerization properties.

    Science.gov (United States)

    Kalipçilar, B; Karaağaçlioğlu, L; Hasanreisoğlu, U

    1991-09-01

    The aim of this study was to evaluate the level of residual monomer in acrylic denture base materials having different polymerization properties. The investigation included a conventional-type acrylic cured under heat and pressure, as well as a pour-type resin polymerized by an injection-moulding technique at room temperature and under pressure. It was found that the residual monomer content ranged from 0.22-0.54% in pour-type resin, and from 0.23-0.52% in routinely used resins when the specimens were analysed by high performance liquid chromatography. These findings revealed that there were no significant differences between the two types of acrylic in terms of their residual monomer content.

  18. Microwave Characterization of Propiolic Sulfuric Anhydride and Two Conformers of Acrylic Sulfuric Anhydride

    Science.gov (United States)

    Smith, CJ; Huff, Anna; Mackenzie, Becca; Leopold, Ken

    2017-06-01

    Sulfur trioxide reacts with propiolic acid and acrylic acid to form propiolic sulfuric anhydride (HC\\equivC-COOSO_{2}OH) and acrylic sulfuric anhydride (H_{2}C=CH-COOSO_{2}OH), respectively. Both species have been observed by chirped-pulse and conventional cavity microwave spectroscopy. In the case of acrylic acid, two conformers derived from the cis and trans form of the acid have been observed. The reaction mechanism and energetics are investigated by density functional theory and CCSD calculations. These results add to a growing body of evidence that establishes carboxylic sulfuric anhydrides, RCOOSO_{2}OH, as a class of molecules formed readily from SO_{3} + RCOOH in the gas phase and which, therefore, may be of significance in the nucleation and growth of atmospheric aerosol particles.

  19. Radiation synthesis of superabsorbent poly(acrylic acid)-carrageenan hydrogels

    Energy Technology Data Exchange (ETDEWEB)

    Francis, Sanju; Kumar, Manmohan; Varshney, Lalit E-mail: lalitv@magnum.barc.ernet.in

    2004-04-01

    A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from {approx}320 to {approx}800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)-carrageenan hydrogels with high gel fraction ({approx}80%) and very high EDS ({approx}800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1-5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.

  20. Surface modification of cellulosic substrates via atmospheric pressure plasma polymerization of acrylic acid: Structure and properties

    Science.gov (United States)

    Garcia-Torres, Jose; Sylla, Dioulde; Molina, Laura; Crespo, Eulalia; Mota, Jordi; Bautista, Llorenç

    2014-06-01

    Surface chemical modification of cellulose-based substrates has been carried out by atmospheric pressure plasma enhanced chemical vapor deposition (AP-PECVD) of acrylic acid. The structure/properties relationship of the samples was studied as a function of the plasma experimental conditions. Acrylic acid monomer/helium ratio and treatment speed clearly influences the wettability properties of the paper substrate: advancing contact angle values were reduced to the half if compare to non-treated paper. Surface morphology of the films did not greatly vary at short polymerization times but fibers were covered by a poly(acrylic acid) film at longer times. FTIR and XPS techniques allowed detecting the retention of carboxylic acid groups/moieties. The possibility to quickly design architectures with tunable carboxylic functions by modifying the plasma processing parameters is shown.

  1. Effect of preparation conditions on selective oxidation of propane to acrylic acid

    Institute of Scientific and Technical Information of China (English)

    YU Zhen-xing; ZHENG Wei; XU Wen-long; ZHANG Yu-hang; FU Hong-ying; ZHANG Ping

    2009-01-01

    The effects of chemical composition and preparation conditions, especially calcination atmosphere and water content on the catalytic performances of MoVTeNbO mixed oxide catalyst system for the selective oxidation of propane to acrylic acid were investigated. Among the catalysts studied, MO_(1.0)V_(0.3)Te_(0.23)Nb_(0.12)O_x catalyst calcined in inert atmosphere at 600 ℃ shows the best performance in terms of propane conversion and selectivity to acrylic acid. The results reveal that proper chemical composition, calcination atmosphere and water content affect greatly the catalysts in many ways including structure, chemical composition, which are related to their catalytic performances; and 51.0% propane conversion and 30.5% one-pass yield to acrylic acid can be achieved at the same time.

  2. Study of Catalysts on the Synthesis of Methyl Acrylate by Hydroesterification of Methyl Formate with Acetylene

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The catalytic hydroesterification of methyl formate (MF) with acetylene to methyl acrylate (MA) over nickel-based catalysts prepared by impregnation has been comprehensively studied in a fixed bed reactor at 160~240℃ and under 4~6MPa, GHSV: 630h-1, CO:N2:C2H2= 65:28:7. In present work, we have found a catalyst of 11wt%NiO/Al2O3 (80~100 mesh) prepared by wet impregnation with NiCl2 aqueous solution, then calcined in air at 500℃ for 5 h. The selectivity to methyl acrylate and the conversion of methyl formate over 11wt%NiO/Al2O3 catalyst are higher than other catalysts studied in this paper. The optimum reaction temperature for the hydroesterification of methyl formate with acetylene to methyl acrylate is around 220℃.

  3. Radiation Induced Grafting of Acrylate onto Waste Rubber: The Effect of Monomer Type

    Directory of Open Access Journals (Sweden)

    Shirajuddin Siti Salwa M.

    2017-01-01

    Full Text Available The effect of three different acrylate group monomers, namely n-butyl acrylate, methacrylic acid and tripropylene glycol diacrylate of radiation induced grafting onto waste rubber was studied. The electron beam accelerator operated at voltage of 2MeV was used to irradiate the waste rubber at 10 kGy and 100 kGy absorbed radiation dose, respectively. The formation of grafting was observed from the increase in the grafting yield and confirmed by Transformed Infra-Red Spectroscopy results. According to the result obtained, only tripropylene glycol diacrylate was selected to graft onto waste rubber. The carbonyl bond from acrylate groups was seen at 1726 cm-1 band which confirmed the presence of TPGDA in the polymer matrix. This indicates the successful preparation of the TPGDA-grafted waste rubber via radiation induced grafting techniques.

  4. Patients' adherence to hard acrylic interocclusal appliance treatment in general dental practice in Sweden.

    Science.gov (United States)

    Lindfors, Erik; Helkimo, Martti; Magnusson, Tomas

    2011-01-01

    The aims of the present study were to investigate patient adherence to treatment with hard acrylic interocclusal appliance in general dentistry in Sweden and to see if some general factors could predict patient adherence or non-adherence. During the period January - May 2009 a postal questionnaire was sent to all adult patients (> or = 20 years of age) that had received a hard acrylic interocclusal appliance from the public dental health service in the County of Uppsala during 2007 (n=388). The same questionnaire was also sent to all adult patients that had received a hard acrylic interocclusal appliance at a specialist clinic during the same year (n=69). The response rate in general dental practice was 71% and at the specialist clinic the response rate was 91%. In general dental practice, 97% of the hard acrylic interocclusal appliances were stabilisation appliances. At the specialist clinic other types of interocclusal appliances was used to a greater extent. A vast majority of patients in both general dental practice and at the specialist clinic experienced that the interocclusal appliance had a positive treatment effect. In general dental practice, 73% of the patients still used their interocclusal appliances 1 1/2-2 years after they had received them. The corresponding figure at the specialist clinic was 54%. The main reasons for not using the interocclusal appliance, besides disappearance/reduction of TMD symptoms, were different kinds of comfort problems. From the results of this study it is concluded that the patient adherence to hard acrylic stabilisation appliances made in general dental practice in Sweden is good. It can also be concluded that a perceived good treatment effect, as well as treatment of more long-term conditions, predicted a better patient adherence to hard acrylic stabilisation appliances. More studies concerning factors affecting patient adherence in TMD therapy are warranted.

  5. High-impact strength acrylic denture base material processed by autoclave.

    Science.gov (United States)

    Abdulwahhab, Salwan Sami

    2013-10-01

    To investigate the effect of two different cycles of autoclave processing on the transverse strength, impact strength, surface hardness and the porosity of high-impact strength acrylic denture base material. High Impact Acryl was the heat-cured acrylic denture base material included in the study. A total of 120 specimens were prepared, the specimens were grouped into: control groups in which high-impact strength acrylic resins processed by conventional water-bath processing technique (74°C for 1.5 h then boil for 30 min) and experimental groups in which high-impact strength acrylic resins processed by autoclave at 121°C, 210 kPa .The experimental groups were divided into (fast) groups for 15 min, and (slow) groups for 30 min. To study the effect of the autoclave processing (Tuttnauer 2540EA), four tests were conducted transverse strength (Instron universal testing machine), impact strength (Charpy tester), surface hardness (shore D), and porosity test. The results were analyzed to ANOVA and LSD test. In ANOVA test, there were highly significant differences between the results of the processing techniques in transverse, impact, hardness, and porosity test. The LSD test showed a significant difference between control and fast groups in transverse and hardness tests and a non-significant difference in impact test and a highly significant difference in porosity test; while, there were a highly significant differences between control and slow groups in all examined tests; finally, there were a non-significant difference between fast and slow groups in transverse and porosity tests and a highly significant difference in impact and hardness tests. In the autoclave processing technique, the slow (long) curing cycle improved the tested physical and mechanical properties as compared with the fast (short) curing cycle. The autoclave processing technique improved the tested physical and mechanical properties of High Impact Acryl. Copyright © 2013 Japan Prosthodontic Society

  6. Real-time monitoring of the penetration of amphiphilic acrylate copolymer in leather using a fluorescent copolymer as tracer.

    Science.gov (United States)

    Du, Jin-Xia; Shi, Lu; Peng, Bi-Yu

    2015-12-01

    A fluorescent tracer, poly (acrylic-co-stearyl acrylate-co-3-acryloyl fluorescein) [poly (AA-co-SA-co-Ac-Flu)], used for real-time monitoring the penetration of amphiphilic acrylate copolymer, poly (acrylic-co-stearyl acrylate) [poly (AA-co-SA)], in leather was synthesized by radical polymerization of acrylic, stearyl acrylate and fluorescent monomer, 3-acryloyl fluorescein (Ac-Flu). The structure, molecular weight, introduced fluorescent group content and fluorescent characteristics of the fluorescent tracer and target copolymer, amphiphilic acrylate copolymer, were also characterized. The results show that the tracer presents the similar structural characteristics to the target and enough fluorescence intensity with 1.68 wt % of the fluorescent monomer introduced amount. The vertical section of the leather treated with the target copolymer mixing with 7% of the tracer exhibits evident fluorescence, and the change of fluorescence intensity along with the vertical section with treating time increasing can reflect the penetration depth of the target copolymer. The introduction of the fluorescent group in polymer structure through copolymerization with a limited amount of fluorescent monomer, Ac-Flu, is an effective way to make a tracer to monitor the penetration of the target in leather, which provides a new thought for the penetration research of syntans such as vinyl copolymer materials in leather manufacture.

  7. SYNTHESIS OF 2—HYDROXYETHYL ACRYLATE BY USING STRONG ACIDIC CATION ION EXCHANGE RESIN AS CATALYST

    Institute of Scientific and Technical Information of China (English)

    GAODabin

    1992-01-01

    2-Hydroxyethyl acrylate is synthesized from acrylic acid and ethylene glycol under a simple and mild condition by using strong acidic cation ion exchange resin as a catalyst,which could be recycled as long as 10 times with high activation.

  8. Electroactive behavior assessment of poly(acrylic acid)-graphene oxide composite hydrogel in the detection of cadmium

    NARCIS (Netherlands)

    Bejarano-Jimenez, A.; Escobar-Barrios, V.A.; Kleijn, J.M.; Oritz-Ledon, C.A.; Chazaro-Ruiz, L.F.

    2014-01-01

    Super absorbent polymers of acrylic acid-graphene oxide (PAA-GO) were synthesized with different percentage of chemical neutralization (0, 10, and 20%) of the acrylic acid monomer before its polymerization. The influence of their swelling and adsorption/desorption capacity of cadmium ions in aqueous

  9. Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

    NARCIS (Netherlands)

    Retsch, Markus; Walther, Andreas; Loos, Katja; Mueller, Axel H. E.; Müller, Axel H.E.

    2008-01-01

    Poly(acrylic acid) polyetectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were u

  10. Adherence of Candida albicans to denture base acrylics and silicone-based resilient liner materials with different surface finishes

    NARCIS (Netherlands)

    Nevzatoglu, Erdem U.; Ozcan, Mutlu; Kulak-Ozkan, Yasemin; Kadir, Tanju

    2007-01-01

    This study evaluated the surface roughness and Candida albicans adherence on denture base acrylic resins and silicone-based resilient liners with different surface finishes. Four commercial denture base acrylic resins ( three heat polymerized and one room temperature polymerized) and five silicone-b

  11. The role of sodium-poly(acrylates) with different weight-average molar mass in phosphate-free laundry detergent builder systems

    OpenAIRE

    Milojević, Vladimir S.; Ilić-Stojanović, Snežana; id_orcid 0000-0003-2416-8281; Nikolić, Ljubiša; Nikolić, Vesna; Stamenković, Jakov; Stojiljković, Dragan

    2013-01-01

    In this study, the synthesis of sodium-poly(acrylate) was performed by polymerization of acrylic acid in the water solution with three different contents of potassium-persulphate as an initiator. The obtained polymers were characterized by using HPLC and GPC analyses in order to define the purity and average molar mass of poly(acrylic acid). In order to investigate the influence of sodium-poly(acrylate) as a part of carbonate/zeolite detergent builder system, secondary washing characteristics...

  12. Cytocompatible antifungal acrylic resin containing silver nanoparticles for dentures

    Directory of Open Access Journals (Sweden)

    Acosta-Torres LS

    2012-09-01

    Full Text Available Laura Susana Acosta-Torres,1 Irasema Mendieta,2 Rosa Elvira Nuñez-Anita,3 Marcos Cajero-Juárez,3 Víctor M Castaño41National School of Higher Education, School of Dentistry - Leon Unit, National Autonomus University of Mexico (UNAM, Leon, Guanajuato, 2Neurobiology Institute, National Autonomus University of Mexico (UNAM, Juriquilla, Queretaro, 3Animal Biotechnology Laboratory, Faculty of Veterinary Medicine at San Nicolas de Hidalgo, Michoacán University, Michoacán, 4Molecular Materials Department, Applied Physics and Advanced Technology Center, National Autonomus University of Mexico (UNAM, Juriquilla, Queretaro, MexicoBackground: Inhibition of Candida albicans on denture resins could play a significant role in preventing the development of denture stomatitis. The safety of a new dental material with antifungal properties was analyzed in this work.Methods: Poly(methyl methacrylate [PMMA] discs and PMMA-silver nanoparticle discs were formulated, with the commercial acrylic resin, Nature-CrylTM, used as a control. Silver nanoparticles were synthesized and characterized by ultraviolet-visible spectroscopy, dispersive Raman spectroscopy, and transmission electron microscopy. The antifungal effect was assessed using a luminescent microbial cell viability assay. Biocompatibility tests were carried out using NIH-3T3 mouse embryonic fibroblasts and a Jurkat human lymphocyte cell line. Cells were cultured for 24 or 72 hours in the presence or absence of the polymer formulations and analyzed using three different tests, ie, cellular viability by 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay, and cell proliferation by enzyme-linked immunosorbent assay BrdU, and genomic DNA damage (Comet assay. Finally, the samples were evaluated mechanically, and the polymer-bearing silver nanoparticles were analyzed microscopically to evaluate dispersion of the nanoparticles.Results: The results show that PMMA-silver nanoparticle discs

  13. Miconazole activity against Candida biofilms developed on acrylic discs.

    Science.gov (United States)

    Gebremedhin, S; Dorocka-Bobkowska, B; Prylinski, M; Konopka, K; Duzgunes, N

    2014-08-01

    Oral candidiasis in the form of Candida-associated denture stomatitis (CaDS) is associated with Candida adhesion and biofilm formation on the fitting surface of poly (methyl methacrylate) (PMMA) dentures. Candida biofilms show considerable resistance to most conventional antifungal agents, a phenomenon that is considered a developmental-phase-specific event that may help explain the high recurrence rates associated with CaDS. The aim of this study was to examine the activity of miconazole towards in vitro-grown mature Candida biofilms formed on heat-cured PMMA discs as a standardized model. The effect of miconazole nitrate on Candida biofilms developed on acrylic discs was determined for C. albicans MYA-2732 (ATCC), C. glabrata MYA-275 (ATCC), and clinical isolates, C. albicans 6122/06, C. glabrata 7531/06, C. tropicalis 8122/06, and C. parapsilosis 11375/07. Candida biofilms were developed on heat-cured poly(methyl methacrylate) discs and treated with miconazole (0.5 - 96 μg/ml). The metabolic activity of the biofilms was measured by the XTT reduction assay. The minimum inhibitory concentrations (MICs) of miconazole against Candida species were determined by the microdilution method. The MICs for miconazole for the investigated strains ranged from 0.016-32 μg/ml. Treatment with miconazole resulted in a significant reduction of biofilm metabolic activity for all strains. The highest inhibition was observed at 96 μg/ml miconazole. In the case of C. glabrata MYA-275 and C. tropicalis 8122/06 this corresponded to 83.7% and 75.4% inhibition, respectively. The lowest reduction was observed for C. parapsilosis 11375/07-46.1%. For all Candida strains there was a strong correlation between MIC values and miconazole concentrations corresponding to a reduction of metabolic activity of the biofilm by 50%. Miconazole exhibits high antifungal activity against Candida biofilms developed on the surface of PMMA discs. The study provides support for the use of miconazole as an

  14. The Modification of the Acrylate Emulsion for Water-Based Coatings

    Institute of Scientific and Technical Information of China (English)

    Chen Wei-Feng; Fa-Ai Zhang

    2005-01-01

    @@ 1Introduction The developments of the environment friendly materials and technology are largely promoted recently.There also come some new kinds of coatings including water-based coating, powder coating, high-solid coating and UV-cured coating[1]. The emulsion polymerization is the main method for preparing the polymer for coatings. One of the most widely used polymers is acrylate resin which is not well in some properties, such as weather resistance, endurance and water resistance[2]. We hope to improve the various properties of the acrylic emulsion by adding silicone made from tetraethyl orthosilicate(TEOS), making it better applied in coating field.

  15. Graft Copolymerization of Acrylic Acid onto Fungal Cell Wall Structural Polysaccharide

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Acrylic acid was graft-copolymerized onto Rhi. oryzae's cell wall structural polysacchaxide directly and efficiently in aqueous solution with ceric ammonium nitrate as initiator. The maximal grafting percentage of 135.5% was obtained under the condition of [Ce4+]=5mmol.L-1, [AA]=1mol.L-1, T=60°C and t=3h. Graft copolymerization was suggested to proceed through free radical reaction mechanism. Grafting occurred primarily on chitosan. Acrylic acid was also attempted to be grafted onto Asp. niger cell wall structural polysaccharide, and only 44.2% of grafting percentage was resulted.

  16. Hydrophobically Modified Polyelectrolytes: V. Interaction of Fluorocarbon Modified Poly (acrylic acid) with Various Added Surfactants

    Institute of Scientific and Technical Information of China (English)

    ZHOU,Hui(周晖); SONG,Guo-Qaiang(宋国强); GUO,Jin-Feng(郭金峰); ZHANG,Yun-xiang (章云祥); DIEING,Reinhold; MA,Lian(马莲); HAEUSSLING,Lukas

    2001-01-01

    The interactions between fiuorocarbon-medified pol(sodium acrylate) and various kinds of added surfactant have been studied by means of viscometric measurement. Association behavior was found in both hydrogenated and fluorinated anionic, nonionic and cationic surfactants. Among them, the interactions between fluorocarbon-modified poly ( sodium acrylate) and cationic surfactants are the strongest, owing to the cooperation of both electrostatic attractions and hydrophobic associations. The anionic surfactants have the weakest effects on the solution properties because of the existence of unfavorable electrostatic repulsion. The hydrophobic interactions between copolymers and fluorinated surfactants are much stronger than those between copolymers and hydrogenated surfactants.

  17. Synthesis of poly(N-isopropylacrylamide-co-acrylic acid) model compounds for filtration experiments

    DEFF Research Database (Denmark)

    Hinge, Mogens; Christensen, Morten Lykkegaard; Scales, Peter

    2005-01-01

    these biosolid/organic systems and thereby make a basis for further theoretical development with respect to filtration.   Poly(N-isopropylacrylamide-co-acrylic acid) microgels are synthesized by free-radical surfactant free emulsion polymerization as an organic model system for biosolids. The model system...... concentrations of acrylic acid as co-monomer. The microgels have a charge density between 0.2 and 0.9 mmol/g.   Preliminary filtration experiments show that filtration properties of the microgel model system significantly differs from the properties for inorganic colloidals such as titaniumdioxid....

  18. Covalent Functionalization of Multiwalled Carbon Nanotubes with Poly(acrylic acid)

    Institute of Scientific and Technical Information of China (English)

    LIU, Yan-Xin; DU, Zhong-Jie; LI, Yan; ZHANG, Chen; LI, Hang-Quan

    2006-01-01

    Covalent functionalization of multiwalled carbon nanotubes (MWNT) with poly(acrylic acid) has been successfully achieved via grafting of poly(acryloyl chloride) on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly(acrylic acid) was covalently attached to the surface of MWNT.

  19. Application of Functionalized SWCNTs for Increase of Degradation Resistance of Acrylic Paint for Cars

    Directory of Open Access Journals (Sweden)

    Osiel Lucas Flores

    2013-01-01

    Full Text Available Physical properties of automotive acrylic paint are improved by incorporation of three different types of carbon nanotubes: single-wall carbon nanotubes (SWCNTs, OH-functionalized single-wall carbon nanotubes (OH-SWCNTs, and aniline-functionalized single-wall carbon nanotubes (aniline-SWCNTs. The formed composites are studied by electron miscroscopy methods and Raman spectrometry. It is found that the acrylic paints with addition of OH-SWCNTs and aniline-SWCNTs show better quality for their applications. In particular, the resistance against degradation by electron beam increased in ~500%.

  20. Synthesis of Acrylic Acid/Kaoline Powder Superabsorbent Composite by Inverse-suspending Polymerization

    Institute of Scientific and Technical Information of China (English)

    ZHONG Jin-feng; XUE Yi-ming; WU Ji-huai; LIN Jian-ming; WEI Yue-lin

    2004-01-01

    An acrylic acid/kaoline powder superabsorbent composite with a water absorbency of the superabsorbent composite about 1/800 was synthesized by inverse-suspending polymerization reaction between acrylic acid monomer and kaoline ultrafine powder. The influence of the dispersant agent on the configuration of the products in the inverse suspension polymerization is investigated. The influences of the kaoline powder, cross-linker, initiator, neutralization degree and the volume ratio of oil to water phase on the water absorbency of the superabsorbent composites are discussed in the paper.

  1. Chemical Fixation of CO{sub 2} to Acrylates Using Low-Valent Molybdenum Sources

    Energy Technology Data Exchange (ETDEWEB)

    Bernskoetter, Wesley

    2013-09-30

    The kinetic, mechanistic, and reactivity experiments to access the viability and possible reaction design of coupling of carbon dioxide and ethylene at a zerovalent molybdenum for the production of acrylates are described. A general model of the reaction mechanism has been outlined, including assessment of the rate limiting step in the reaction. Kinetic and computational data have valuated the influence of a range of tridentate ligand platforms on the rate of coupling. An in situ reduction and acrylate formation activity screen protocol has also been developed to aid in the technology development of this process. Portions of descriptions of the research products presented here have also been adapted with permission from journal publications.

  2. Shade Guide for the Fabrication of Acrylic Denture Based on Mucosal Colour

    Science.gov (United States)

    Da Costa, Godwin Clovis; Aras, Meena Ajay

    2017-01-01

    This article highlights the use of a simple and convenient shade guide system which not only helps in choosing the shade tab that matches with the colour of the mucosa, but, also helps in the fabrication of the precise shade of acrylic resin for making the denture. The shade guide is fabricated by mixing specified quantities of various colours of acrylic polymer in order to obtain various shade tabs. The method for fabrication of the shade guide and the clinical procedure has been discussed. PMID:28384988

  3. Synthesis and characterization of poly acrylic acid/graphite oxide nanocomposite

    Institute of Scientific and Technical Information of China (English)

    胡源; 丁溶芳; 徐加艳; 王清安; 陈祖耀; 范维澄

    2003-01-01

    Acrylic acid-intercalated graphite oxide and poly acrylic acid (PAA)-intercalated graphite oxide were prepared and characterized by X-Ray diffraction (XRD), Fourier transform infrared spectra (FTIR) and high resolution electronic microscope (HREM). Results show that the intercalation process is not only a physical diffusion process but also mainly a chemical reaction process. The high resolution electronic microscope results also reveal that the Ic value of PAA-intercalated graphite oxide (GO) could change widely from 1.6nm to 4.0nm.

  4. Acrylation of pre-irradiated polypropylene and its application for removal of organic pollutants

    Science.gov (United States)

    Said, Hossam M.; Sokker, Hesham H.; El-Hag Ali, Amr

    2010-04-01

    Reactive extrusion of pre-irradiated polypropylene (PP) at different doses of gamma radiation was studied in the presence of different concentrations of acrylic acid monomer (AAc). Preliminary investigations study the feasibility or removal of organic pollutants. The optical properties and surface morphology of the grafted polypropylene were observed by FT-IR, UV/vis and scanning electron microscopy (SEM). The affinity of this membrane to the basic dye was found to be increased with increase in the dose of gamma irradiation and the ratio of acrylic acid monomer (AAc).

  5. Glycerol oxidehydration into acrolein and acrylic acid over W/V/Nb bronzes with hexagonal structure

    Energy Technology Data Exchange (ETDEWEB)

    Basile, F.; Cavani, F.; Chieregato, A. [Bologna Univ. (Italy). Dipt. di Chimica Industriale e dei Materiali; CIRI Energia e Ambiente, Bologna (Italy); Concepcion, P.; Lopez Nieto, J.M.; Soriano, M.D. [Univ. Politecnica de Valencia (Spain). Inst. de Tecnologia Quimica; Liosi, G.; Trevisanut, C. [Bologna Univ. (Italy). Dipt. di Chimica Industriale e dei Materiali

    2012-07-01

    This paper deals with an investigation of hexagonal W-V-Nb-O and W-V-Mo-O bronzes as catalysts for the one-pot oxidehydration of glycerol into acrylic acid. In a previous work, we reported a study on a bi-component bronze W-V-O that allowed us to obtain a 25% acrylic acid selectivity; in the current work, the incorporation of either Nb or Mo in a tri-component bronze structure allowed us to tune the acid and redox properties of the catalyst, so as to study their influence on the overall reaction scheme. (orig.)

  6. Synthesis and Characterization of Waterborne Fluoropolymers Prepared by the One-Step Semi-Continuous Emulsion Polymerization of Chlorotrifluoroethylene, Vinyl Acetate, Butyl Acrylate, Veova 10 and Acrylic Acid

    Directory of Open Access Journals (Sweden)

    Hongzhu Liu

    2017-01-01

    Full Text Available Waterborne fluoropolymer emulsions were synthesized using the one-step semi-continuous seed emulsion polymerization of chlorotrifluoroethylene (CTFE, vinyl acetate (VAc, n-butyl acrylate (BA, Veova 10, and acrylic acid (AA. The main physical parameters of the polymer emulsions were tested and analyzed. Characteristics of the polymer films such as thermal stability, glass transition temperature, film-forming properties, and IR spectrum were studied. Meanwhile, the weatherability of fluoride coatings formulated by the waterborne fluoropolymer and other coatings were evaluated by the quick ultraviolet (QUV accelerated weathering test, and the results showed that the fluoropolymer with more than 12% fluoride content possessed outstanding weather resistance. Moreover, scale-up and industrial-scale experiments of waterborne fluoropolymer emulsions were also performed and investigated.

  7. Synthesis and Characterization of Waterborne Fluoropolymers Prepared by the One-Step Semi-Continuous Emulsion Polymerization of Chlorotrifluoroethylene, Vinyl Acetate, Butyl Acrylate, Veova 10 and Acrylic Acid.

    Science.gov (United States)

    Liu, Hongzhu; Bian, Jiming; Wang, Zhonggang; Hou, Chuan-Jin

    2017-01-22

    Waterborne fluoropolymer emulsions were synthesized using the one-step semi-continuous seed emulsion polymerization of chlorotrifluoroethylene (CTFE), vinyl acetate (VAc), n-butyl acrylate (BA), Veova 10, and acrylic acid (AA). The main physical parameters of the polymer emulsions were tested and analyzed. Characteristics of the polymer films such as thermal stability, glass transition temperature, film-forming properties, and IR spectrum were studied. Meanwhile, the weatherability of fluoride coatings formulated by the waterborne fluoropolymer and other coatings were evaluated by the quick ultraviolet (QUV) accelerated weathering test, and the results showed that the fluoropolymer with more than 12% fluoride content possessed outstanding weather resistance. Moreover, scale-up and industrial-scale experiments of waterborne fluoropolymer emulsions were also performed and investigated.

  8. Assembly of Hydrophobically Modified Poly(acrylic acid) with Cyclodextrins%Assembly of Hydrophobically Modified Poly(acrylic acid) with Cyclodextrins

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Hydrophobically modified poly(acrylic acid)s (HMPAA) with alkyl (C12 or C18) substitution degree ranging from 3% to 10% were synthesized. Their rheological properties in aqueous solutions can be controlled by adding native cyclodextrins (CD) and surfactant SDS. Upon addition of CD, the viscosity of HMPAA solution was reduced significantly because of the destruction of hydrophobic associations by capping the hydrophobic alkyl groups by CD due to the host-guest complexation.

  9. Evaluation of thermal conductivity of heat-cured acrylic resin mixed with A1203

    Directory of Open Access Journals (Sweden)

    Ebadian B.

    2002-08-01

    Full Text Available One of the most important characteristics of denture base is thermal conductivity. This property has a major role in secretions of salivary glands and their enzymes, taste of the food and gustatory response. Polymethyl methacrylate used in prosthodontics is relatively an insulator. Different materials such as metal fillers and ceramics have been used to solve this problem. The aim of this study was the evaluation of AI2O3 effect on thermal conductivity of heat-cured acrylic resin. Acrylic resin was mixed with AI2O3 in two different weight rates (15 and 20 % of weight. So, group 1 and 2 were divided on this basis. Samples with pure acrylic resin were considered as control group. 18 cylindrical patterns were made in 9x9 mm dimensions and thermocouple wires embedded in each sample to act as conductor. The specimens were put in water with 70±1°C thermal range for 10 minutes. Then, thermal conductivity was measured. The results were analyzed with variance analysis and Dunken test. There was significant difference between thermal conductivity of all groups in all period times. It the first seconds, thermal conductivity in groups 1 and 2 were more than control group. Therefore, for developing of thermal conductivity of acrylic resin, A1203 can be used. Certainly, other characteristic of new resin should be evaluated.

  10. Survival analysis of mandibular complete dentures with acrylic-based resilient liners.

    Science.gov (United States)

    Kimoto, Suguru; Kimoto, Katsuhiko; Murakami, Hiroshi; Gunji, Atsuko; Ito, Nana; Kawai, Yasuhiko

    2013-09-01

    The purpose of this long-term randomised controlled trial was to compare the longevity of dentures constructed using a conventional acrylic resin (CAR) to that of dentures constructed using an acrylic-based resilient liner (ARL). The follow-up study was essentially carried out by annual telephone calls to each of the 67 participants. The Kaplan-Meier method and life-table analysis were used for univariate analyses. The Cox proportional-hazards test was used as a final model for statistically adjusting predictor variables such as sex, clinician type, mandibular denture type and age at denture delivery. The denture type was likely to affect the survival time of the dentures, while the sex and clinician type were not. The group using acrylic-based resilient denture liners had twice the risk of having shorter denture-survival times than those using conventional acrylic resin dentures. Younger participants were likely to have a reduced risk of having shorter denture-survival times than older participants. We conclude that mandibular complete dentures constructed using ARL are twice as likely as dentures constructed using CAR to have shorter denture survival times, mainly because of material deterioration. © 2012 John Wiley & Sons A/S and The Gerodontology Society. Published by John Wiley & Sons Ltd.

  11. Polymer coating comprising 2-methoxyethyl acrylate units synthesized by surface-initiated atom transfer radical polymerization

    DEFF Research Database (Denmark)

    2011-01-01

    Source: US2012184029A The present invention relates to preparation of a polymer coating comprising or consisting of polymer chains comprising or consisting of units of 2-methoxyethyl acrylate synthesized by Surface-Initiated Atom Transfer Radical Polymerization (SI ATRP) such as ARGET SI ATRP...... or AGET SI ATRP and uses of said polymer coating....

  12. Selective oxidation of propane to acrylic acid over mixed metal oxide catalysts

    Institute of Scientific and Technical Information of China (English)

    Wei Zheng; Zhenxing Yu; Ping Zhang; Yuhang Zhang; Hongying Fu; Xiaoli Zhang; Qiquan Sun; Xinguo Hu

    2008-01-01

    The effects of metal atomic ratio, water content, oxygen content, and calcination temperature on the catalytic perfor-mances of MoVTeNbO mixed oxide catalyst system for the selective oxidation of propane to acrylic acid have been investigated and discussed. Among the catalysts studied, it was found that the MoVTeNbO catalyst calcined at a temperature of 600 ℃ showed the best performance in terms of propane conversion and selectivity for acrylic acid under an atmosphere of nitrogen. An effective MoVTeNbO oxide catalyst for propane selective oxidation to acrylic acid was obtained with a combination of a preferred metal atomic ratio (Mo1 V0.31Te0.23Nb0.12). The optimum reaction condition for the selective oxidation of propane was the molar ratio of C3H81 :O2 : H2O : N1 = 4.4 : 12.8 : 15.3 : 36.9. Under such conditions, the conversion of propane and the maximum yield of acrylic acid reached about 50% and 21%, respectively.

  13. Polypyrrole-coated styrene-butyl acrylate copolymer composite particles with tunable conductivity

    Institute of Scientific and Technical Information of China (English)

    HUANG Liyan; HOU Wenbo; LIU Zhengping; ZHANG Qingyue

    2005-01-01

    A series of near or monodisperse styrene-butyl acrylate (SBA) copolymer latex particles with different butyl acrylate contents were coated with polypyrrole. The structure of the SBA/PPy composites was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC) and standard four-probe method. The core-shell morphology of the SBA/PPy composite particles was confirmed. The result of DSC showed that Tg of the composite is mainly determined by the core component. The effects of the concentration of polypyrrole, the butyl acrylate content in SBA copolymer and the nature of the counter-anion on the electrical conductivity of compression-moulded samples were studied. It was first found that the electrical conductivity of the samples can be tuned by varying the butyl acrylate content in SBA copolymer and the highest conductivity of the core-shell composite was 0.17 S·cm-1.

  14. Acrylic/CDP混纺织物染色同色性探讨

    Institute of Scientific and Technical Information of China (English)

    刘姗; 张贵; 王思捷

    2015-01-01

    采用常用的阳离子染料分别对Acrylic/CDP混纺织物进行一浴法染色,测试染色织物K/S值,同色平衡值K及色差△E,筛选出染Acrylic/CDP混纺织物同色性好的三原色染料,即TR阳离子黄、TR阳离子红和TR阳离子蓝。将筛选出的三原色在不同温度下进行染色,找出Acrylic/CDP混纺织物染色同色性好的温度。结果显示:在105~110℃之间,Acrylic/CDP混纺织物的染色同色性好;另外,匀染剂M的使用也可以有效地提高其Acrylic/CDP混纺织物染色同色性。

  15. Propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Il [Kangwon National University, Chuncheon (Korea, Republic of); Choi, Bok Kyoung [Maritime Security Research Center, KIOST, Ansan (Korea, Republic of)

    2014-12-15

    The present study aims to investigate the propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom. The velocities of the guided waves in a 5-mm-thick acrylic plate were measured by using the axial transmission technique. A pure A0 Lamb mode could be successfully launched in the 5-mm-thick acrylic plate through a time reversal process of Lamb waves, consistent with the fact that the time reversal process can automatically compensate for the dispersive nature of Lamb waves. The experimental velocities of the slow guided wave (SGW) and the time-reversed Lamb wave were found to be in reasonable agreement with the theoretical group velocity of the A0 Lamb mode, suggesting that both the SGW and the time-reversed Lamb wave excited in the 5-mm-thick acrylic plate correspond to the A0 Lamb mode. These results suggest that the time reversal process of Lamb waves can be usefully applied to noninvasive characterization of long cortical bones.

  16. The influence of cyclic loading on gentamicin release from acrylic bone cements

    NARCIS (Netherlands)

    Hendriks, JGE; Neut, D; Hazenberg, JG; Verkerke, GJ; van Horn, [No Value; van der Mei, HC; Busscher, HJ

    2005-01-01

    Antibiotic-loaded acrylic bone cement is widely used in total joint replacement to reduce infections. Walking results in cyclic loading, which has been suggested to stimulate antibiotic release. The goal of this study is to compare antibiotic release from cyclically loaded bone cement with the relea

  17. Synthesis of poly(methyl urethane) acrylate oligomer using 2-isocyanatoethyl methacrylate for UV curable coating.

    Science.gov (United States)

    Park, M N; Oh, S W; Ahn, B H; Moon, M J; Kang, Y S

    2009-02-01

    The poly(methyl urethane) acrylate oligomer was obtained by the reaction of methyl acrylate oligomer and 2-isocyanatoethyl methacrylate. Synthesis of poly(methyl urethane) acrylate oligomer was done with 2-mercaptoethanol (2-MEOH), methyl acrylate, 2,2'-azobisisobutyronitrile (AIBN, initiator) and dibutyltin dilaurate as a catalyst. Then 2-MEOH was used for functional chain transfer agent. The structure and property of the synthesized oligomers were characterized by FT-IR, FT-NMR, rheometer, and DSC. In this study, by synthetic method including the addition of 2-isocyanatoethyl methacrylate, thermal behavior of synthesized material was improved more than that reported in the previous study. Poly(methyl urethane) oligomer can be used for UV curable coatings, inks and adhesives. UV curable coating have high resistance against weather, ozone, aging, frictional wear, and heat. Besides they can absorb the shock and resist rust according to the thickness of film. It is used as an adhesive, paint, optical fiber coating agent, and waterproof agent because of these advantages at the present time.

  18. Screening of Catalyst and Important Variable for The Esterification of Acrylic Acid with 2 Ethylhexanol

    Science.gov (United States)

    Ahmad, M. A. A.; Chin, S. Y.

    2017-06-01

    The global demand of 2-ethylhexyl acrylate (2EHA) market has witnessed a significant growth in the past few years and this growth is anticipated to increase in the coming years. 2EHA is one of the basic organic building blocks that mainly used in the production of coatings, adhesives, superabsorbents, thickeners and plastic additives. Homogenous acid-catalysed esterification of acrylic acid (AA) with 2-ethylhexanol (2EH) is commonly used for the production of 2EHA. The homogeneous catalysts such as sulfuric and para-toluene sulfonic acid have resulted the costly and complicated downstream process that generates acidic, corrosive and non-environmental friendly waste. Therefore, it is importance to develop a cheaper process that employing heterogeneous catalysts and alternative raw material from wastewater containing acrylic acid. In this research, the study for the esterification of AA with 2EH catalysed by ion-exchange resin was conducted. The best sulfonic acid functional cation-exchange resin among SK104, SK1B, PK208, PK216, PK228, RCP145, and RCP160 was screened. PK208 outperformed the other resins and it was used subsequently in the parametric studies. The effect of important parameters (initial concentration of acrylic acid (AA), temperature, molar ratio of reactant (AA and 2EH), catalyst loading, and polymerisation inhibitor loading) was studied using 2 factorial design to determine the significant parameters to the esterification. It was found that the initial concentration of AA and temperature were most significantly affecting the esterification of AA with 2EH.

  19. Polymorphism and polymerisation of acrylic and methacrylic acid at high pressure

    DEFF Research Database (Denmark)

    Oswald, Iain D. H.; Urquhart, Andrew J.

    2011-01-01

    The polymorphism and polymerisation of two related acids have been investigated under high pressure conditions. Acrylic acid crystallises as a new polymorph at 0.65 GPa whilst methacrylic acid crystallises in a new polymorph at a higher pressure of 1.5 GPa. Both these new polymorphs exhibit similar...

  20. PHOTORESPONSIVE BEHAVIOR OF AZOBENZENE-BASED (METH)ACRYLIC (CO)POLYMERS IN THIN-FILMS

    NARCIS (Netherlands)

    HAITJEMA, HJ; VONMORGEN, GL; TAN, YY; CHALLA, G

    1994-01-01

    The reversible photoisomerization and the thermal isomerization of azobenzene-based (Az.b.) groups covalently bound to (meth)acrylic (co)polymers were investigated in thin films. For the amorphous polymers it was found that a broad range of the thermal cis --> trans isomerization rates could be obta

  1. Synthesis and application of novel EB curable polyester urethane acrylate modified by linseed oil fatty acid

    Science.gov (United States)

    Jun, Li; Xuecheng, Ju; Min, Yi; Jinshan, Wei; Hongfei, Ha

    1999-06-01

    A novel polyester urethane acrylate resin modified by linseed oil fatty acid (LFA) was synthesized and EB curing coating was formulated in this work. When the coating cured by EB radiation on the timber, the cured coating was possessed of good performances.

  2. 21 CFR 177.1480 - Nitrile rubber modified acrylonitrile-methyl acrylate copolymers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Nitrile rubber modified acrylonitrile-methyl... Nitrile rubber modified acrylonitrile-methyl acrylate copolymers. Nitrile rubber modified acrylonitrile... this chapter, subject to the provisions of this section. (a) For the purpose of this section, nitrile...

  3. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Science.gov (United States)

    2010-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  4. The Influence of Chicken Egg Shell as Fillers on Biocomposite Acrylic Resin for Denture Based

    Science.gov (United States)

    Lubis, M.; Ginting, M. H. S.; Dalimunthe, N. F.; Hasibuan, D. M. T.; Sastrodihardjo, S.

    2017-03-01

    This research was conducted to discover the influence of the addition of chicken egg shells microparticle as filler on the mechanical properties such as modulus of elasticity, modulus of rapture and particle size analysis on biocomposite acrylic resin for denture based. The raw materials used in this research were acrylic resin, egg shell, cold mold seals, gypsum, Vaseline and wax. The process of making biocomposite acrylic resin for denture based with mix the acrylic resin in ratio 2:1 (w/w). Then added the microparticle filler 0,10,20,30 (%w) to mold and boil in 75°C for 90 minutes and increase the temperature to 90 °C for 30 minutes. Took the sample and let it dried. The results of research showed the increase of modulus elasticity and modulus of rapture. The modulus of elasticity showed a very significant increase by adding fillers 10% of 2.123 GPa, which was only 1.932 GPa without adding the filler of chicken egg shells. For modulus of rapture showed the increase by adding fillers 20% of 48,311MPa, which was only 46,865 GPa without adding the filler of chicken egg shells

  5. 21 CFR 177.1990 - Vinylidene chloride/methyl acrylate copolymers.

    Science.gov (United States)

    2010-04-01

    ... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances... producing, manufacturing, processing, preparing, treating, packaging, transporting, or holding food... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Vinylidene chloride/methyl acrylate copolymers....

  6. Deep UV patterning of acrylic masters for molding biomimetic dry adhesives

    Science.gov (United States)

    Sameoto, D.; Menon, C.

    2010-11-01

    We present a novel fabrication method for the production of biomimetic dry adhesives that allows enormous variation in fiber shapes and sizes. The technology is based on deep-UV patterning of commercial acrylic with semi-collimated light available from germicidal lamps, and combined careful processing conditions, material selection and novel developer choices to produce relatively high-aspect-ratio fibers with overhanging caps on large areas. These acrylic fibers are used as a master mold for subsequent silicone rubber negative mold casting. Because the bulk acrylic demonstrates little inherent adhesion to silicone rubbers, the master molds created in this process do not require any surface treatments to achieve high-yield demolding of interlocked structures. Multiple polymers can be cast from silicone rubber negative molds and this process could be used to structure smart materials on areas over multiple square feet. Using direct photopatterning of acrylic allows many of the desired structures for biomimetic dry adhesives to be produced with relative ease compared to silicon-based molding processes, including angled fibers and hierarchical structures. Optimized fiber shapes for a variety of polymers can be produced using this process, and adhesion measurements on a well-characterized polyurethane, ST-1060, are used to determine the effect of fiber geometry on adhesion performance.

  7. Irradiation Initiated Grafting of Poly(butyl acrylate) onto Nano-sized Calcium Carbonate Particles

    Institute of Scientific and Technical Information of China (English)

    Chuan Guo MA; Min Zhi RONG; Ming Qiu ZHANG

    2005-01-01

    The present work reports the irradiation induced grafting polymerization onto nano-sized CaCO3 particles, mainly focusing on the effects of pretreatment with silane coupling agent. It is proved that poly(butyl acrylate) can be grafted onto the nanoparticles using the technical route suggested by the authors, and the silane treatment of the nanoparticles promotes the grafting polymerization.

  8. Possible utilization of acrylic paint and copper phthalocyanine pigment sludge for vermiculture.

    Science.gov (United States)

    Majumdar, Deepanjan; Buch, Vaidehi; Macwan, Praisy; Patel, Jignesh

    2010-05-01

    Sludge generated from water treatment plants in two different paint and pigment manufacturing industries, one manufacturing CPC Green (copper phthalocyanine green) and the other acrylic (pure and styrene) washable distempers, synthetic enamels, fillers and putties, were used for culturing earthworms (Eisenia foetida Savigny). The possibility of getting a quality vermicompost was also explored. The sludges were used pure and mixed with month-old cow dung at 1:1, 1:2, 1:3, 2:1 and 3:1 ratios (sludge:cow dung). In pure sludges and in the 3:1 ratio, earthworms did not survive. Earthworms had very low survival in CPC Green sludge and its mixtures while acrylic paint sludge was very efficient in supporting worm growth and worm castings were generated quickly. Both sludges were alkaline, non-saline, but had appreciable Ca, Al, Pb, Zn, and Mn. CPC Green had high Cu (12,900 mg kg(-1)) and acrylic paint sludge had high total Cr (155 mg kg(-1)). High Ca and Al in both came from water treatment chemicals (lime and alum), while CPC Green itself is a copper-based pigment. The sludges were suitable for land application with regard to their metal contents, except for Cu in CPC Green. CPC Green did not support proper growth of plants (green gram, Vigna radiata (L). R. Wilcz.), while acrylic paint sludge supported growth in pure form and mixtures with soil.

  9. Synthesis and antibacterial properties of beta-diketone acrylate bioisosteres of pseudomonic acid A.

    Science.gov (United States)

    Bennett, I; Broom, N J; Cassels, R; Elder, J S; Masson, N D; O'Hanlon, P J

    1999-07-05

    A series of beta-diketone acrylate bioisosteres 4 of pseudomonic acid A 1 have been synthesized and evaluated for their ability to inhibit bacterial isoleucyl-tRNA synthetase and act as antibacterial agents. A number of analogues have excellent antibacterial activity. Selected examples were shown to afford good blood levels and to be effective in a murine infection model.

  10. Effect of Phyllanthus emblica Linn. on candida adhesion to oral epithelium and denture acrylic

    Institute of Scientific and Technical Information of China (English)

    Boonyanit Thaweboon; Sroisiri Thaweboon

    2011-01-01

    Objective: To investigate the effect of Phyllanthus emblica (P. emblica) Linn. ethanolic extract on the adhesion of Candida albicans (C. albicans) to human buccal epithelial cells (BECs) and denture acrylic surfaces. Methods: Human BECs and transparent acrylic strips were pretreated with ethanolic extract solution of P. emblica fruits at concentration ranged from 18.7 to 300 mg/mL. After washing BECs and the strips were inoculated with three strains of C. albicans (ATCC 10281 and two clinical isolates) (107 cells/mL). Normal saline solution (NSS) and 0.2%chlorhexidine gluconate were used as negative and positive controls, respectively. BECs were harvested on 12 μm-polycarbonate filters (Millipore, USA). The membrane filters and the strips were stained with Gram stain. Adherent yeast cells on 100 randomly selected epithelial cells and 20 randomly selected fields on each strip were counted under microscope. The statistical significance was calculated by Kruskal-Wallis and Tukey tests at a significant level of P< 0.05.Results:Significant lower numbers of all strains of yeasts adhering to BECs and acrylic strips were observed after exposure to 75-300 mg/mL of plant extract compared with NSS. Conclusions:The present study demonstrates that P. emblica ethanolic extract interferes with the adhesion of C.albicans to BECs and denture acrylic surfaces in vitro.

  11. Inhibition of candida adhesion to denture acrylic byBoesenbergia pandurata

    Institute of Scientific and Technical Information of China (English)

    Thaweboon Sroisiri; Thaweboon Boonyanit

    2010-01-01

    Objective:To investigate effect ofBoesenbergia pandurata (B. pandurata) rhizome extract on adhesion ofCandida albicans (C. albicans) to acrylic surface.Methods: Transparent acrylic strips were prepared and divided into three groups with pretreatment by extract solution ofB. pandurata rhizome at concentration of 25, 50 and 100 mg/mL, respectively. After washing, the strips were then inoculated with two strains ofC. albicans (ATCC13803 and the clinical isolate) (107cells/mL). Normal saline solution and 0.2% chlorhexidine gluconate were used as negative and positive controls, respectively. Stained the strips with modified Gram stain without counterstain. Adherent yeast cells were direct counted under microscope (Olympus-CX31, Japan) in 20 randomly selected fields on each strip. The statistical significance was calculated by Kruskal-Wallis and Mann-Whitney non-parametric tests at a significance level ofP < 0.05.Results: Pretreatment withB. pandurata extract significantly reduced the adhesion of both strains ofC. albicans to acrylic surfaces in a dose dependent manner.Conclusions:This observation indicates thatB. pandurata extract has an inhibitory effect on the ability ofC. albicans to adhere to denture acrylic and could be employed as an antifungal agent for preventing denture stomatitis.

  12. Development of nanoparticulate drug delivery systems based on thiolated poly(acrylic acid).

    Science.gov (United States)

    Thaurer, Michael H; Deutel, Britta; Schlocker, Wolfgang; Bernkop-Schnürch, Andreas

    2009-05-01

    In this study the preparation and stabilization of poly(acrylic acid)-cysteine nanoparticles and incorporation of a fluorescence marked model-compound was investigated. Nanoparticles were prepared by ionic gelation of a poly(acrylic acid)-cysteine conjugate with calcium chloride. Poly(acrylic acid)-cysteine nanoparticles display high cohesive properties due to a cross-linking process via calcium bridges in the core and the pervasive formation of disulphide bonds and were 139 ± 34 nm in size. Nanoparticles were loaded with FITC-dextrans (flourescein isothiocyanate-dextrans) of 4, 20 and 40 kDa molecular mass as model-compound via sonication method or via vibration method for 3 and 24 h. In vitro release studies showed an initial burst release followed by an extended release of model-compounds. The lower the molecular mass of the FITC-dextrans, the higher was the amount of incorporated and released model compounds. Vibration seems to be a proper method for the incorporation of hydrophilic and macromolecular drugs in poly(acrylic acid)-cysteine nanoparticles.

  13. Catalytic acetoxylation of lactic acid to 2-acetoxypropionic acid, en route to acrylic acid

    NARCIS (Netherlands)

    Beerthuis, R.; Granollers, M.; Brown, D.R.; Salavagione, H.J.; Rothenberg, G.; Shiju, N.R.

    2015-01-01

    We present an alternative synthetic route to acrylic acid, starting from the platform chemical lactic acid and using heterogeneous catalysis. To improve selectivity, we designed an indirect dehydration reaction that proceeds via acetoxylation of lactic acid to 2-acetoxypropionic acid. This

  14. Comparison of dimensional changes of two cold- cured acrylic resins: Acropars and Meliodent

    Directory of Open Access Journals (Sweden)

    Ebadian B. Assistant Professor

    2003-07-01

    Full Text Available Statement of Problem: The construction of dental materials has been developing inside the country."nCold- cured acrylic resins are of such materials which are used in removable prostheses."nPurpose: The aim of this study was to compare the dimensional changes of two types of cold-cured"nacrylic resins, Acropars and Meliodent."nMaterial and Methods: Forty acrylic discs, with diameter of 13.7 mm, were made of Acropars and"nMeliodent acrylic resins (20 samples in each group. Then, each group was randomly divided into two"nparts. The first group was kept in usual environment, whereas the samples of the second group were"nplaced in the boiling water for five minutes. The dimensional changes of the samples, at different"nintervals and seven days post curing, were measured by light microscope and recorded. Variance analysis"nwas used to analyze the results."nResults: Acropars resins, comparing to Meliodent ones, showed a considerable dimensional changes,"nwhich was statistically significant. Boiling of Acropars resins, for five minutes, lead to a significant"nshrinkage. The maximum shrinkage occured at 24 hours post curing."nConclusion: If the tray is made of Acropars acrylic resin, it is recommended to take impression, 24 hours"nafter its setting.

  15. SYNTHESIS AND CATALYTIC ACTIVITY OF PLATINUM COMPLEX OF ACRYLATE TERPOLYMER WITH Se,N BIDENTATE LIGAND

    Institute of Scientific and Technical Information of China (English)

    MengLingzhi; QiLiangwei; 等

    1998-01-01

    Acrylate terpolymer-bound Se,N bidentate ligand was synthesized from the side chain chlorine of copolymer and β-dimethylamino-β′-hydroxyl-diethyl selenoether.The polymer-supported platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.

  16. Gold Nanoparticles Protected with Thiol-Derivatized Amphiphilic Poly(epsilon-caprolactone)-b-poly(acrylic acid)

    DEFF Research Database (Denmark)

    Javakhishvili, Irakli; Hvilsted, Søren

    2009-01-01

    Amphiphilic poly(epsilon-caprolactone)-b-poly(acrylic acid) (HS-PCL-b-PAA) with a thiol functionality in the PCL terminal has been prepared in a novel synthetic cascade. Initially, living anionic ring-opening polymerization (ROP) of epsilon-caprolactone (epsilon-CL) employing the difunctional...

  17. Effect of tyrosol on adhesion of Candida albicans and Candida glabrata to acrylic surfaces.

    Science.gov (United States)

    Monteiro, Douglas Roberto; Feresin, Leonardo Perina; Arias, Laís Salomão; Barão, Valentim Adelino Ricardo; Barbosa, Debora Barros; Delbem, Alberto Carlos Botazzo

    2015-09-01

    The prevention of adhesion of Candida cells to acrylic surfaces can be regarded as an alternative to prevent denture stomatitis. The use of quorum sensing molecules, such as tyrosol, could potentially interfere with the adhesion process. Therefore, the aim of this study was to assess the effect of tyrosol on adhesion of single and mixed cultures of Candida albicans and Candida glabrata to acrylic resin surfaces. Tyrosol was diluted in each yeast inoculum (10(7) cells/ml in artificial saliva) at 25, 50, 100, and 200 mM. Then, each dilution was added to wells of 24-well plates containing the acrylic specimens, and the plates were incubated at 37°C for 2 h. After, the effect of tyrosol was determined by total biomass quantification, metabolic activity of the cells and colony-forming unit counting. Chlorhexidine gluconate (CHG) was used as a positive control. Data were analyzed using analysis of variance (ANOVA) and the Holm-Sidak post hoc test (α = 0.05). The results of total biomass quantification and metabolic activity revealed that the tyrosol promoted significant reductions (ranging from 22.32 to 86.16%) on single C. albicans and mixed cultures. Moreover, tyrosol at 200 mM and CHG significantly reduced (p tyrosol has an inhibitory effect on Candida adhesion to acrylic resin, and further investigations are warranted to clarify its potential against Candida infections.

  18. Electrochemical Impedance Spectroscopy Study on Corrosion Protection of Acrylate Nanocomposite on Mild Steel Doped Carbon Nanotubes

    Science.gov (United States)

    Mahmud, M. R.; Akhir, M. M.; Shamsudin, M. S.; Afaah, A. N.; Aadila, A.; Asib, N. A. M.; Alrokayan, Salman A. H.; Khan, Haseeb A.; Harun, M. K.; Rusop, M.; Abdullah, S.

    2015-05-01

    Acrylate:carbon nanotubes (A:CNTs) nanocomposite thin film was prepared by sol- gel technique. The corrosion coating protection of acrylate:carbon nanotubes (CNTs) nanocomposite thin film has been coated on mild steel characterised by electrochemical impedance spectrometer (EIS) measurement and equivalent circuit model are employed to analyse coating impedance for corrosion protection. In this study, 3.5 w/v % sodium chloride (NaCl) solution was immersed the acrylate:carbon nanotubes nanocomposite thin film. As the results, the surface morphology were found that there formation of carbon nanotubes with good distribution on acrylate-based coating. From EIS measurement, A:CNTs nanocomposite thin film with 0.4 w/v % contain of CNTs was exhibited the highest coating impedance from Nyquist graph after immersed in sodium chloride solution and may provide the excellent corrosion protection. The Bode plots have shown the impedance is high at the beginning from the time at high frequency and slightly decreases with value of frequency become smaller.

  19. Effect of different housing retaining materials on the flexural strength of an acrylic resin overdenture base.

    Science.gov (United States)

    Ozkir, Serhat Emre; Yilmaz, Burak

    2017-04-03

    An attachment housing inside an overdenture may weaken the acrylic resin base. The type of housing retaining material may affect the strength of the housing retaining material-acrylic resin base assembly. The effect of different housing retaining materials on the strength of acrylic resin base is unknown. The purpose of this in vitro study was to evaluate the effects of different materials used to retain the housing on the flexural strength of a poly(methyl methacrylate) (PMMA) resin base. Sixty PMMA specimens (64×10×4 mm) were prepared with a clearance inside to allow the insertion of overdenture housings. Five different materials were used for housing orientation: an autopolymerizing composite resin, an acrylic resin reline material, a heat-polymerized PMMA, an autopolymerizing PMMA (n=10), and a control group (n=10) were prepared without any preparation or housing. The specimens were thermocycled 5000 times between 5°C and 55°C. The flexural strength data were analyzed by an analysis of variance using the maximum likelihood estimation method to eliminate the needs for normality within the groups and for equality of variances between the groups. If statistically significant, resolution of the significance factor was obtained by pairwise comparisons using the Tukey adjustment (α=.05). The fracture values were statistically significantly higher (Pmaterial (26.78 ±6.72 MPa), the acrylic resin reline material (16.94 ±4.38 MPa), the Ufigel (16.07 ±3.40 MPa), and the autopolymerizing composite resin (19.37 ±3.13 MPa). Heat- and autopolymerizing PMMA groups were significantly different from acrylic resin-based hard reline materials (Pmaterial except for one of the hard reline groups, which separated from the PMMA. The tested retaining materials significantly reduced the flexural strength of PMMA denture base. The flexural strength of the resin base with housing was significantly higher when PMMA-based retaining materials were used than when acrylic resin

  20. Transdermal thiol-acrylate polyethylene glycol hydrogel synthesis using near infrared light

    Science.gov (United States)

    Chung, Solchan; Lee, Hwangjae; Kim, Hyung-Seok; Kim, Min-Gon; Lee, Luke P.; Lee, Jae Young

    2016-07-01

    Light-induced polymerization has been widely applied for hydrogel synthesis, which conventionally involves the use of ultraviolet or visible light to activate a photoinitiator for polymerization. However, with these light sources, transdermal gelation is not efficient and feasible due to their substantial interactions with biological systems, and thus a high power is required. In this study, we used biocompatible and tissue-penetrating near infrared (NIR) light to remotely trigger a thiol-acrylate reaction for efficient in vivo gelation with good controllability. Our gelation system includes gold nanorods as a photothermal agent, a thermal initiator, diacrylate polyethylene glycol (PEG), and thiolated PEG. Irradiation with a low-power NIR laser (0.3 W cm-2) could induce gelation via a mixed-mode reaction with a small increase in temperature (~5 °C) under the optimized conditions. We also achieved successful transdermal gelation via the NIR-assisted photothermal thiol-acryl reactions. This new type of NIR-assisted thiol-acrylate polymerization provides new opportunities for in situ hydrogel formation for injectable hydrogels and delivery of drugs/cells for various biomedical applications.Light-induced polymerization has been widely applied for hydrogel synthesis, which conventionally involves the use of ultraviolet or visible light to activate a photoinitiator for polymerization. However, with these light sources, transdermal gelation is not efficient and feasible due to their substantial interactions with biological systems, and thus a high power is required. In this study, we used biocompatible and tissue-penetrating near infrared (NIR) light to remotely trigger a thiol-acrylate reaction for efficient in vivo gelation with good controllability. Our gelation system includes gold nanorods as a photothermal agent, a thermal initiator, diacrylate polyethylene glycol (PEG), and thiolated PEG. Irradiation with a low-power NIR laser (0.3 W cm-2) could induce gelation

  1. The effects of surface roughness and type of denture acrylic on biofilm formation by Streptococcus oralis in a constant depth film fermentor.

    Science.gov (United States)

    Morgan, T D; Wilson, M

    2001-07-01

    To investigate the effects of surface roughness and type of denture acrylic on the early development of a Streptococcus oralis biofilm in a constant depth film fermentor (CDFF). Streptococcus oralis was incubated with acrylic of known surface roughness in the CDFF. Adherent Strep. oralis were enumerated by viable counting. Cold-cure acrylic was rougher (P effect on the number of adherent bacteria. The type of acrylic used, and its roughness, affect the early stages of biofilm formation by Strep. oralis. Choosing an appropriate type of smooth acrylic could lead to reduced biofilm formation in vivo.

  2. PMMA-based composite materials with reactive ceramic fillers: IV. Radiopacifying particles embedded in PMMA beads for acrylic bone cements.

    Science.gov (United States)

    Abboud, M; Casaubieilh, L; Morvan, F; Fontanille, M; Duguet, E

    2000-01-01

    New acrylic bone cements were prepared from alumina particles previously treated by 3-(trimethoxysilyl)propylmethacrylate (gamma-MPS) and embedded in poly(methylmethacrylate-co-ethylacrylate) beads with about 7 mol% of ethyl acrylate repeating units. The encapsulation was performed through a conventional suspension polymerization process. The influence of (i) the concentration of the dispersion stabilizer and (ii) the alumina content upon the shape, size, and size distribution of the acrylic beads was studied. Cements were prepared from each batch by hand-mixing alumina-filled acrylic beads with a liquid monomer mixture containing methyl methacrylate, n-butyl methacrylate, and N,N-dimethyl-p-toluidine. Benzoyl peroxide was previously added to the solid part. The powder-to-liquid ratio was equal to 2 for each formulation. Compressive strength of cured cement decreases with alumina content, whereas compressive modulus remains roughly constant. These results are in contradiction to those obtained for cements based on a mixture of gamma-MPS-treated alumina and unfilled acrylic beads. Nevertheless, they are interpreted in terms of alumina arrangement in the cement. In the first case, alumina particles contribute to the reinforcement of the dispersed acrylic phase, with poor benefits for the whole materials. In the second case, they allow the reinforcement of the continuous acrylic phase and, therefore, the cement's one.

  3. EFFECTS OF THERMOCYCLING AND VARIOUS DRINKS ON THE COLOR STABILITY OF HEAT-POLYMERIZED ACRYLIC RESIN

    Directory of Open Access Journals (Sweden)

    Pınar ALTINCI

    2016-10-01

    Full Text Available Purpose: The discoloration of acrylic resin denture bases may lead to significant esthetic problems. The aim of this in vitro study was to investigate the effects of frequently consumed drinks on the color changes of fresh and aged, heat-polymerized, conventional acrylic resin. Materials and Methods: Eighty-four, heat-polymerized acrylic resin specimens (4 mm x 5 mm x 30 mm were fabricated. Half of the specimens were aged by thermal cycling (between 5°C and 55°C, 60-second dwell time, 3000 cycles. The specimens were stored at 37°C in different drinks as non-aged and aged subgroups including water (control group, black tea, green tea, sour cherry juice, coke and coffee (n=7. The discoloration of each specimen after 1 and 7 days storage in the drinks were measured by a colorimeter based on CIE Lab system. The data of colour differences (ΔE were analyzed by ANOVA and Dunnet’s tests. Results: Thermal cycling and storage in water induced a slight color change. The highest ΔE values were observed in the aged groups, which was also noticeable for black tea and sour cherry juice after 7 days of storage (ΔE>1.5 (p<0.05. The ΔE values of all test groups were detected within the acceptable clinical limits (ΔE<3.5. Conclusion: These results suggest that the color stability of denture base acrylic resins is influenced by ageing. Black tea, sour cherry juice and coke can cause significant discolorations on acrylic resin denture bases.

  4. Self-initiation of UV photopolymerization reactions using tetrahalogenated bisphenol A (meth)acrylates.

    Science.gov (United States)

    Pelras, Théophile; Knolle, Wolfgang; Naumov, Sergej; Heymann, Katja; Daikos, Olesya; Scherzer, Tom

    2017-02-17

    The potential of tetrachlorinated and tetrabrominated bisphenol A diacrylates and dimethacrylates for self-initiation of a radical photopolymerization was investigated. The kinetics of the photopolymerization of an acrylic model varnish containing halogenated monomers was studied by real-time FTIR spectroscopy, whereas the formation of reactive species and secondary products was elucidated by laser flash photolysis and product analysis by GC-MS after steady-state photolysis. The interpretation of the experimental data and the analysis of possible reaction pathways were assisted by quantum chemical calculations. It was shown that all halogenated monomers lead to a significant acceleration of the photopolymerization kinetics at a minimum concentration of 5 wt%. Steady-state and laser flash photolysis measurements as well as quantum chemical calculations showed that brominated and chlorinated samples do not follow the same pathway to generate radical species. Whereas chlorinated (meth)acrylates may cleave only at the C-O bonds of the carboxyl groups resulting in acrolein and oxyl radicals for initiation, brominated monomers may cleave either at the C-O bonds or at the C-Br bonds delivering aryl and bromine radicals. The quantum yields for the photolysis of the halogenated monomers were found to be in the order of 0.1 for acrylates and 0.2 for methacrylates (with an estimated error of 25%), independently of the attached Br and Cl halogens. Finally, the trihalogenated bisphenol A di(meth)acrylate radicals and the acrolein radicals were found to show the highest efficiencies for the reaction with another acrylic double bond leading to the formation of a polymer network.

  5. Influence of ozone and paracetic acid disinfection on adhesion of resilient liners to acrylic resin

    Science.gov (United States)

    2016-01-01

    PURPOSE The aim of this study was to evaluate the effect of paracetic acid (PAA) and ozone disinfection on the tensile bond strength (TBS) of silicone-based resilient liners to acrylic resins. MATERIALS AND METHODS One hundred and twenty dumbbell shaped heat-polymerized acrylic resins were prepared. From the mid segment of the specimens, 3 mm of acrylic were grinded off and separated parts were reattached by resilient liners. The specimens were divided into 2 control (control1, control7) and 4 test groups of PAA and ozone disinfection (PAA1, PAA7, ozone1 and ozone7; n=10). While control groups were immersed in distilled water for 10 min (control1) and 7 days (control7), test groups were subjected to PAA (16 g/L) or ozone rich water (4 mg/L) for 1 cycle (10 min for PAA and 60 min for ozone) per day for 7 days prior to tensile tests. Measurements of the TBS were analyzed using 3-way ANOVA and Tukey's HSD test. RESULTS Adhesive strength of Mollosil decreased significantly by application of ozone disinfection. PAA disinfection had no negative effect on the TBS values of Mollosil and Molloplast B to acrylic resin. Single application of ozone disinfection did not have any negative effect on TBS values of Molloplast B, but prolonged exposure to ozone decreased its adhesive strength. CONCLUSION The adhesion of resilient liners to acrylic was not adversely affected by PAA disinfection. Immersion in ozonated water significantly decreased TBS of Mollosil. Prolonged exposure to ozone negatively affects adhesion of Molloplast B to denture base materials. PMID:27555898

  6. Cisplatin-incorporated nanoparticles of poly(acrylic acid-co-methyl methacrylate copolymer

    Directory of Open Access Journals (Sweden)

    Lee KD

    2013-08-01

    Full Text Available Kyung Dong Lee,1,* Young-Il Jeong,2,* Da Hye Kim,3,4 Gyun-Taek Lim,2 Ki-Choon Choi5 1Department of Oriental Medicine Materials, Dongshin University, Naju, South Korea; 2Department of Polymer Engineering, Chonnam National University, Gwangju, South Korea; 3Faculty of Life and Environmental Science, Shimane University, Matsue, Japan; 4United Graduate School of Agricultural Sciences, Tottori University, Tottori, Japan; 5Grassland and Forages Division, National Institute of Animal Science, Rural Development Administration, Cheonan, South Korea *These authors contributed equally to this work Background: Although cisplatin is extensively used in the clinical field, its intrinsic toxicity limits its clinical use. We investigated nanoparticle formations of poly(acrylic acid-co-methyl methacrylate (PAA-MMA incorporating cisplatin and their antitumor activity in vitro and in vivo. Methods: Cisplatin-incorporated nanoparticles were prepared through the ion-complex formation between acrylic acid and cisplatin. The anticancer activity of cisplatin-incorporated nanoparticles was assessed with CT26 colorectal carcinoma cells. Results: Cisplatin-incorporated nanoparticles have small particle sizes of less than 200 nm with spherical shapes. Drug content was increased according to the increase of the feeding amount of cisplatin and acrylic acid content in the copolymer. The higher acrylic acid content in the copolymer induced increase of particle size and decrease of zeta potential. Cisplatin-incorporated nanoparticles showed a similar growth-inhibitory effect against CT26 tumor cells in vitro. However, cisplatin-incorporated nanoparticles showed improved antitumor activity against an animal tumor xenograft model. Conclusion: We suggest that PAA-MMA nanoparticles incorporating cisplatin are promising carriers for an antitumor drug-delivery system. Keywords: cisplatin, nanoparticle, poly(acrylic acid-co-methyl methacrylate, ion complexes

  7. One-step routes from di- and triblock copolymer precursors to hydrophilic nanoporous poly(acrylic acid)-b-polystyrene

    DEFF Research Database (Denmark)

    Guo, Fengxiao; Jankova Atanasova, Katja; Schulte, Lars;

    2008-01-01

    Nanoporous polystyrene with hydrophilic pores was prepared from di- and triblock copolymer precursors. The precursor material was either a poly(tert-butyl acryl ate)-b-polystyrene (PtBA-b-PS) diblock copolymer synthesized by atom transfer radical polymerization (ATRP) or a polydimethylsiloxane......-b-poly(tertbutyl acrylate)-b-polystyrene (PDMS-b-PtBA-b-PS) triblock copolymer synthesized by a combination of living anionic polymerization and ATRP. In the latter copolymer, PS was the matrix and mechanically stable component, PtBA was converted by acidic deprotection to hydrophilic poly(acrylic acid) (PAA) providing...

  8. Pre-irradiation induced emulsion co-graft polymerization of acrylonitrile and acrylic acid onto a polyethylene nonwoven fabric

    Science.gov (United States)

    Liu, Hanzhou; Yu, Ming; Ma, Hongjuan; Wang, Ziqiang; Li, Linfan; Li, Jingye

    2014-01-01

    A pre-irradiation induced emulsion co-graft polymerization method was used to introduce acrylonitrile and acrylic acid onto a PE nonwoven fabric. The use of acrylic acid is meant to improve the hydrophilicity of the modified fabric. The kinetics of co-graft polymerization were studied. The existence of polyacrylonitrile (PAN) and poly(acrylic acid) (PAAc) graft chains was proven by Fourier transform infrared spectroscopy (FTIR) analysis. The existence of the nitrile groups in the graft chains indicates that they are ready for further amidoximation and adsorption of heavy metal ions.

  9. Separation of water and oil by poly (acrylic acid)-coated stainless steel mesh prepared by radiation crosslinking

    Energy Technology Data Exchange (ETDEWEB)

    Nho, Young Chang; Shin, Jung Woong; Park, Jong Seok; Lim, Young Mook; Jeun, Joon Pyo; Kang, Phil Hyun [Research Division for Industry and Environment, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2015-05-15

    The stainless steel mesh coated with poly(acrylic acid) hydrogel was fabricated and applied for the separation of water and oil. The stainless steel mesh was immersed in aqueous poly (acrylic acid) solution, and then irradiated by radiation to introduce poly(acrylic acid) hydrogel on the surface of mesh by crosslinking. It was possible to separate oil and water from mixtures of oil/water effectively using the hydrogel-coated mesh. The effect of irradiation dose, coating thickness, size of mesh on the separation efficiency was examined.

  10. Development of a novel oxirane-acrylate composite restorative resin material

    Science.gov (United States)

    Sripathi Panditaradhyula, Anuhya

    The need for resin with a long clinical life can be satiated through the novel formulation of varying concentrations of oxirane and acrylate monomers with an increase in filler loading in the sample, which will allow the creation of a resin that is less susceptible to chemical degradation along with improved mechanical properties. Various concentrations of oxirane and acrylate monomers with a three-component photoinitiation system, which is capable of both free radical (acrylate) and cationic (oxirane) initiation, are used. The resin composites were placed in the Speedmixer for 30 seconds and gravitation convection oven for one minute, repeated 5-7 times. The resin composites were used to create a 9.525 mm diameter * 1.5875 mm thick resin mold. The mold was then photocured for twenty seconds on both sides using VALO blue LED light. The Rockwell hardness and shore D durometer hardness served as relative measures of bonding between the monomers. The ideal formulation of oxirane and acrylate concentrations were used to perform the Instron 3 point bend test, as well as contact angle determination. The goal is to identify a resin with a clinical life twice that of the resins being used in practice. Potential findings include ideal oxirane and acrylate concentrations with the highest shore D durometer hardness, Rockwell hardness, contact angle values, and Instron 3 point bend test values. Ideal color, transparency and properties of the resin are taken into account. Optimization of oxirane and acrylate monomers, impact while using various filler components (salination, number of fillers), filler particle size variations and variations in using different filler concentrations are observed. Results of using micro and nano-sized monomers are also studied. Addition of fluorinated acrylate monomer to the micro and nano composite was the next goal. A comparison of all the above stated compositions to the control group 70/30 BisTEG was done. A study on the degradation behavior

  11. Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat-polymerized acrylic resin

    Directory of Open Access Journals (Sweden)

    Mahroo Vojdani

    2012-09-01

    Conclusion: Reinforcement of the conventional heat-cured acrylic resin with 2.5 wt% Al2O3 powder significantly increased its flexural strength and hardness with no adverse effects on the surface roughness.

  12. Synthesis of Novel C2-Symmetrical Bidentate Phosphoramidite Ligands for Rh-catalyzed Asymmetric Hydrogenation of β-(Acylamino)acrylates

    Institute of Scientific and Technical Information of China (English)

    Qing Heng ZENG; Xiang Ping HU; Xin Miao LIANG; Zhuo ZHENG

    2006-01-01

    Two new C2-symmetrical bidentate phosphoramidite ligands were synthesized and employed in the Rh-catalyzed asymmetric hydrogenation of β-(acylamino)acrylates, up to 89% ee with full conversions was obtained.

  13. Nail Damage (Severe Onychodystrophy) Induced by Acrylate Glue: Scanning Electron Microscopy and Energy Dispersive X-Ray Investigations

    Science.gov (United States)

    Pinteala, Tudor; Chiriac, Anca Eduard; Rosca, Irina; Larese Filon, Francesca; Pinteala, Mariana; Chiriac, Anca; Podoleanu, Cristian; Stolnicu, Simona; Coros, Marius Florin; Coroaba, Adina

    2017-01-01

    Background Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques have been used in various fields of medical research, including different pathologies of the nails; however, no studies have focused on obtaining high-resolution microscopic images and elemental analysis of disorders caused by synthetic nails and acrylic adhesives. Methods Damaged/injured fingernails caused by the use of acrylate glue and synthetic nails were investigated using SEM and EDX methods. Results SEM and EDX proved that synthetic nails, acrylic glue, and nails damaged by contact with acrylate glue have a different morphology and different composition compared to healthy human nails. Conclusions SEM and EDX analysis can give useful information about the aspects of topography (surface sample), morphology (shape and size), hardness or reflectivity, and the elemental composition of nails. PMID:28232921

  14. In Situ Monitoring of UV-Curing Kinetics of Acrylate Coatings by Combined Ultrasound Reflectometry and Near-Infrared Spectroscopy

    OpenAIRE

    Agarwal, Suman

    2011-01-01

    UV radiation curing is a novel technology in the field of organic coatings. It involves curing of reactive resin using the energy of photons in the wavelength region 200-400 nm. The most attractive feature of this method is its low space, low capital and low energy consumption. Free radical polymerizable acrylate resins are the most commonly used resins in UV curing. The UV curable acrylates are mainly used as protective and decorative coatings. In general curing displays a complex interdepen...

  15. Application of waterborne acrylic emulsions in coated controlled release fertilizer using reacted layer technology

    Institute of Scientific and Technical Information of China (English)

    Yazhen Shen; Cong Zhao; Jianmin Zhou; Changwen Du

    2015-01-01

    Waterborne acrylic emulsions modified with organic siloxanes and aziridine crosslinker were synthesized and applied as coating of controlled release fertilizer. The free films were characterized and the nutrient release pro-files of the coated fertilizers were determined. The results show that methyl silicone oil and methylsilanolate so-dium could not improve water resistance performance and glass transition temperature Tg of coatings, while the firmness is enhanced. Aziridine crosslinker improves the water resistance performance, firmness and Tg. Incorpo-ration of methyl silicone oil and aziridine crosslinker gives an excellent aqueous acrylic emulsion for coated con-trol ed release fertilizer, with the 30-day cumulative nutrient release reduced to 16%and an estimated nutrient release duration over 190 days. Therefore, this waterborne coating is promising to meet the requirements for controlled release of nutrient and environmental protection.

  16. Determination of Crosslinking and Grafting in Polyurethane-acrylic Hybrid Material and Their Theoretical Calculations

    Institute of Scientific and Technical Information of China (English)

    JIANG Xu-bao; ZHU Xiao-li; ZHANG Zhi-guo; KONG Xiang-zheng; TAN Ye-bang

    2011-01-01

    A theoretical method to calculate the mode of polyurethane(PU) prepolymers grafted to polyacrylic(PAC) was presented. Using hydroxyethyl acrylate(HEA) as coupling agent, polyurethane-acrylics(PU-AC) hybrid latexes were prepared with varying HEA level and the reaction of HEA with PU prepolymers at different temperatures, and PU grafted to PAC was experimentally determined. The results show that PU grafted to PAC regularly increased, and the non-grafted and linear free PU regularly decreased with increase in HEA/NCO(isocyanate group). The grafted PU on PAC was not proportional to HEA. More than half of linear PU prepolymers were grafted to PAC when HEA was at a low level with HEA/NCO at 0.33. While grafted PU increased to 84.80% (mass fraction), when HEA/NCO increased to 1.0. The results were interpreted based on the theoretical calculation of PU grafted to PAC by the present method.

  17. Preparation of Conductive Coating Solutions by Blending Waterborne Acrylic Polyurethane Dispersion with Carbon Nanotube

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Woo Young; Yun, Dong Gu; Song, Ki Chang [Konyang University, Nonsan (Korea, Republic of)

    2013-02-15

    Waterborne polyurethane dispersion (WPUD) was synthesized from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with an acrylate monomer, methyl methacrylate (MMA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. With increasing the amount of MMA in the AUD, the pencil hardness, abrasion resistance and chemical resistance of the coating films were improved, but the electrical conductivity of the coating films was decreased. On the other hand, the pencil hardness, abrasion resistance and chemical resistance of coating films were decreased, but the electrical conductivity was enhanced with increasing the amount of MWCNT in the conductive coating solutions.

  18. CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

    Institute of Scientific and Technical Information of China (English)

    Fei Xie; Zong-hui Liu; De-qing Wei

    2002-01-01

    A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinking properties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in the emulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transition temperature (Tg) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kinetics studied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 KJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and can be used at room temperature.

  19. Synthesis and characterization of amphiphilc block copolymer poly(methyl acrylic acid)-block-polytetrahydrofuran

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Under the specially designated condition the polymerization of both tetrahydrofuran (THF) and tert-butyl methacrylate (tBMA) is a living one. The diblock copolymer, poly(tert-butyl methacrylate)-block-polytetrahydrofuran (PtBMA-b-PTHF), was successfully synthesized by means of the coupling reaction of living cationic PTHF+, SbF6- with living anionic PtBMA-, Li+. LiCl, which has a beneficial effect on the molecular weight distribution (MWD) in the anionic polymerization of (meth)acrylates, hinders the coupling reaction of living chains and cannot be used in the preparation of tBMA precursor. The hydrolysis of the aforementioned diblock copolymer under acid condition results in the amphiphilic diblock copolymer, i.e. poly(methyl acrylic acid)-block-polytetra- hydrofuran (PMAA-b-PTHF). The diblock copolymers were characterized with GPC and IR.

  20. FTIR study of hydrogen bonding between substituted benzyl alcohols and acrylic esters

    Directory of Open Access Journals (Sweden)

    P. Sivagurunathan

    2016-11-01

    Full Text Available Hydrogen bonding between substituted benzyl alcohols (benzyl alcohol, o-aminobenzyl alcohol, o-chlorobenzyl alcohol and o-nitrobenzyl alcohol and acrylic esters (methyl methacrylate, ethyl methacrylate is studied in carbon tetrachloride by using the FTIR spectroscopic method. Utilizing the Nash method, the formation constant (K of the 1:1 complexes is calculated. Using the K value, the Gibbs free energy change (ΔG0 is also calculated. The calculated formation constant and Gibbs free energy change values vary with the substituent of benzyl alcohol and ester chain length, which suggests that the proton donating ability of substituted benzyl alcohols is in the order: o-aminobenzyl alcohol < benzyl alcohol < o-chlorobenzyl alcohol < o-nitrobenzyl alcohol, and proton accepting ability of acrylic esters is in the order: methyl methacrylate < ethyl methacrylate.

  1. Synthesis and characterization of starch-poly(methyl acrylate) graft copolymers using horseradish peroxidase.

    Science.gov (United States)

    Wang, Su; Wang, Qiang; Fan, Xuerong; Xu, Jin; Zhang, Ying; Yuan, Jiugang; Jin, Heling; Cavaco-Paulo, Artur

    2016-01-20

    Horseradish peroxidase (HRP)-mediated graft polymerization in the presence of hydrogen peroxide (H2O2) and acetylacetone (Acac) has been successfully applied to the synthesis of starch-poly(methyl acrylate) (PMA). The graft copolymer was characterized by Fourier transform infrared (FT-IR), elemental analysis, nuclear magnetic resonance ((1)H NMR and (13)C NMR), and differential scanning calorimetry (DSC). FT-IR, elemental analysis and NMR confirmed that methyl acrylate (MA) was grafted onto starch successfully. DSC results showed the graft reaction had changed the crystalline regions of the gelatinized starch. The effects of pH, MA content, HRP dosage, incubation temperature and time on grafting percentage (GP) and grafting efficiency (GE) were also investigated. The GP and GE under optimal conditions reached 30.21% and 45.13%, respectively.

  2. Double-bond-containing polyallene-based triblock copolymers via phenoxyallene and (meth)acrylate

    Science.gov (United States)

    Ding, Aishun; Lu, Guolin; Guo, Hao; Huang, Xiaoyu

    2017-03-01

    A series of ABA triblock copolymers, consisting of double-bond-containing poly(phenoxyallene) (PPOA), poly(methyl methacrylate) (PMMA), or poly(butyl acrylate) (PBA) segments, were synthesized by sequential free radical polymerization and atom transfer radical polymerization (ATRP). A new bifunctional initiator bearing azo and halogen-containing ATRP initiating groups was first prepared followed by initiating conventional free radical homopolymerization of phenoxyallene with cumulated double bond to give a PPOA-based macroinitiator with ATRP initiating groups at both ends. Next, PMMA-b-PPOA-b-PMMA and PBA-b-PPOA-b-PBA triblock copolymers were synthesized by ATRP of methyl methacrylate and n-butyl acrylate initiated by the PPOA-based macroinitiator through the site transformation strategy. These double-bond-containing triblock copolymers are stable under UV irradiation and free radical circumstances.

  3. Flexural Strength of Acrylic Resin Denture Bases Processed by Two Different Methods

    Directory of Open Access Journals (Sweden)

    Jafar Gharechahi

    2014-09-01

    Full Text Available Background and aims. The aim of this study was to compare flexural strength of specimens processed by conventional and injection-molding techniques. Materials and methods. Conventional pressure-packed PMMA was used for conventional pressure-packed and injection-molded PMMA was used for injection-molding techniques. After processing, 15 specimens were stored in distilled water at room temperature until measured. Three-point flexural strength test was carried out. Statistical analysis was carried out by SPSS using t-test. Statistical significance was defined at P<0.05. Results. Flexural strength of injection-polymerized acrylic resin specimens was higher than that of theconventional method (P=0.006. This difference was statistically significant (P=0.006. Conclusion. Within the limitations of this study, flexural strength of acrylic resin specimens was influenced by the mold-ing technique.

  4. Time-related surface modification of denture base acrylic resin treated by atmospheric pressure cold plasma.

    Science.gov (United States)

    Qian, Kun; Pan, Hong; Li, Yinglong; Wang, Guomin; Zhang, Jue; Pan, Jie

    2016-01-01

    The changes of denture base acrylic resin surface properties under cold plasma and the relationships with time were investigated. Cold plasma treated the specimens for 30 s, 60 s, 90 s, and 120 s, respectively. Water contact angles were measured immediately after the treatment, 48 h, 15 days and 30 days later. Surface roughness was measured with 3-D laser scanning microscope. Candida albicans adherence was evaluated by CFU counting. Chemical composition was monitored by X-ray photoelectron spectroscopy analysis. Water contact angle reduced after treated for 30 s. No changes were observed with time prolonged, except the durability. There were no differences in roughness among all groups. However, treatment groups showed significantly lower C. albicans adherence. XPS demonstrated a decrease in C/O, and this reduction was affected by treatment time. Cold plasma was an effective means of increasing hydrophilicity of acrylic resin and reducing C. albicans adherence without affecting physical properties.

  5. Oxidative dehydration of glycerol to acrylic acid over vanadium-impregnated zeolite beta

    Energy Technology Data Exchange (ETDEWEB)

    Pestana, Carolina F.M.; Guerra, Antonio C.O.; Turci, Cassia C. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Ferreira, Glaucio B. [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Inst. de Quimica; Mota, Claudio J.A., E-mail: cmota@iq.ufrj.br [INCT Energia e Ambiente, Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2013-01-15

    The oxidative dehydration of glycerol to acrylic acid was studied over vanadium-impregnated zeolite Beta. Catalysts were prepared by wet impregnation of ammonium metavanadate over ammonium-exchanged zeolite Beta, followed by air calcination at 823 K. Impregnation reduced the specific surface area, but did not significantly affected the acidity (Bronsted and Lewis) of the zeolites. The catalytic evaluation was carried out in a fixed bed flow reactor using air as the carrier and injecting glycerol by means of a syringe pump. Acrolein was the main product, with acetaldehyde and hydroxy-acetone (acetol) being also formed. Acrylic acid was formed with approximately 25% selectivity at 548 K over the impregnated zeolites. The result can be explained by XPS (X-ray photoelectron spectroscopy) measurements, which indicated a good dispersion of the vanadium inside the pores. (author)

  6. In Vitro Study on the Adhesion and Colonization of Candida Albicans on Metal and Acrylic Piercings

    Directory of Open Access Journals (Sweden)

    Stamenov N.

    2016-03-01

    Full Text Available Oral/perioral piercing may provide an ideal environment for adhesion and colonization of microorganisms. The aim of this study is to perform an “in vitro” research on the capabilities of adhesion of Candida albicans on oral piercings made of plastic and metal. Acrylic and metal piercings were incubated with Candida albicans and then were observed using scanning electron microscopy under different magnifications. A lot of irregularities and roughness were observed on the surface of the plastic piercing unlike the surface of the metal one, which is not so rough. Nevertheless, the number of Candida albicans colonies was considerably larger on the scanned metal surface in comparison to the plastic surface. In vitro the metal surface of the piercing creates better environment for the adhesion and colonization of microorganisms than the acrylic. This could be attributed to the electrostatic forces that most likely attract Candida albicans to the metal piercing in the early stages of biofilm formation.

  7. Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films

    Science.gov (United States)

    Mohammdi, Seyedeh Raziyeh; Ajji, Abdellah; Tabatabaei, Seyed H.

    2015-05-01

    Nowadays, the possibility to easy open a food package is of great interest both from the consumer and food producers' perspective. In this study, the peel/seal properties of poly (ethylene methyl acrylate) (EMA)/polybutene-1 (PB-1) blend films were investigated. Three blends of EMA/PB-1 with different methyl acrylate (MA) content were prepared using cast extrusion process. Differential Scanning Calorimetry (DSC) was used to investigate the thermal behavior as well as the crystalinity of the blends. The effect of polymer matrix on the crystalline structure of PB-1 was studied using Wide Angle X-ray Diffraction (WAXD) and DSC. T-peel tests were carried out on the heat sealed films at various seal temperatures. The effect of MA content and heat seal temperature on peel/seal properties (i.e. peel initiation temperature, temperature window of sealability and peel strength) of the films were studied.

  8. Flexural strength of acrylic resin denture bases processed by two different methods.

    Science.gov (United States)

    Gharechahi, Jafar; Asadzadeh, Nafiseh; Shahabian, Foad; Gharechahi, Maryam

    2014-01-01

    Background and aims. The aim of this study was to compare flexural strength of specimens processed by conventional and injection-molding techniques. Materials and methods. Conventional pressure-packed PMMA was used for conventional pressure-packed and injection-molded PMMA was used for injection-molding techniques. After processing, 15 specimens were stored in distilled water at room temperature until measured. Three-point flexural strength test was carried out. Statistical analysis was carried out by SPSS using t-test. Statistical significance was defined at P<0.05. Results. Flexural strength of injection-polymerized acrylic resin specimens was higher than that of the conventional method (P=0.006). This difference was statistically significant (P=0.006). Conclusion. Within the limitations of this study, flexural strength of acrylic resin specimens was influenced by the molding technique.

  9. Preparation of Styrene-acrylate Latex Used in Ultra-low VOC Building Internal Wall Coating

    Institute of Scientific and Technical Information of China (English)

    CHEN Lijun; WU Fengqin; ZHUANG Xinyu; YANG Jian; LI Rongxian

    2008-01-01

    Styrene-acrylate latex with high glass transition temperature(Tg),low minimum film forming temperature(MFT)and good stability was prepared via core-shell emulsion polymerization.With semicontinuous process,high conversion rate of monomer and low gel rate were achieved.The weight ratio of core monomer to shell monomer was approximately 1.35.It is found that many factors such as emulsifiers,initiators,reaction temperature,pH value and polymerization technology have influences on the permormance of styrene-acrylate latex.The prepared latex was characterized by TEM and FTIR.The obtained latex with T of20.57℃,MFT of 5.0℃,and good stability,had good stability of film forming.

  10. Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

    Institute of Scientific and Technical Information of China (English)

    NIU Zhenbin; ZHANG Xingyuan; DAI Jiabing; ZHANG Heping

    2007-01-01

    A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB),poly(propylene glycol) (PPG),isophorene diisocyanate (IPDI),2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA).2-Hydroxy- 1-[4-(2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent.Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process.Effects of relative content of HTPB and PPG on emulsion stability,resistance to water and ethanol,thermal stability,compatibility of soft and hard segment,as well as the mechanical property of the cured film were investigated.

  11. Dispersion and film-forming properties of poly(acrylic acid)-stabilized carbon nanotubes.

    Science.gov (United States)

    Saint-Aubin, Karell; Poulin, Philippe; Saadaoui, Hassan; Maugey, Maryse; Zakri, Cécile

    2009-11-17

    We present a detailed study of the influence of pH on the dispersion and film-forming properties of poly(acrylic acid)-stabilized carbon nanotubes. Poly(acrylic acid) (PAA) is a weak polyelectrolyte, with a pH-responsive behavior in aqueous solution. We obtain quantitative UV-visible measurements to show that the amount of polyelectrolyte in optimal pH conditions is weak, showing a good efficiency of the polymer as a carbon nanotube dispersing agent. The best dispersion conditions are achieved at pH 5, a value close to the pK(a) of PAA. Apart from this tenuous pH value, the PAA is not efficient at stabilizing nanotubes and atomic force microscopy allows us to explain the delicate balance between the PAA adsorption and the suspension stability. This study finally permits optimal conditions for making homogeneous and conductive composite films to be determined.

  12. Preparation of metal adsorbent from poly(methyl acrylate)-grafted-cassava starch via gamma irradiation

    Science.gov (United States)

    Suwanmala, Phiriyatorn; Hemvichian, Kasinee; Hoshina, Hiroyuki; Srinuttrakul, Wannee; Seko, Noriaki

    2012-08-01

    Metal adsorbent containing hydroxamic acid groups was successfully synthesized by radiation-induced graft copolymerization of methyl acrylate (MA) onto cassava starch. The optimum conditions for grafting were studied in terms of % degree of grafting (Dg). Conversion of the ester groups present in poly(methyl acrylate)-grafted-cassava starch copolymer into hydroxamic acid was carried out by treatment with hydroxylamine (HA) in the presence of alkaline solution. The maximum percentage conversion of the ester groups of the grafted copolymer, % Dg=191 (7.63 mmol/g of MA), into the hydroxamic groups was 70% (5.35 mmol/g of MA) at the optimum condition. The adsorbent of 191%Dg had total adsorption capacities of 2.6, 1.46, 1.36, 1.15 and 1.6 mmol/g-adsorbent for Cd2+, Al3+, UO22+, V5+ and Pb2+, respectively, in the batch mode adsorption.

  13. Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films

    Energy Technology Data Exchange (ETDEWEB)

    Mohammdi, Seyedeh Raziyeh; Ajji, Abdellah; Tabatabaei, Seyed H. [Department of Chemical Engineering, École Polytechnique de Montréal, Montréal, Québec, H3C3A7 (Canada)

    2015-05-22

    Nowadays, the possibility to easy open a food package is of great interest both from the consumer and food producers’ perspective. In this study, the peel/seal properties of poly (ethylene methyl acrylate) (EMA)/polybutene-1 (PB-1) blend films were investigated. Three blends of EMA/PB-1 with different methyl acrylate (MA) content were prepared using cast extrusion process. Differential Scanning Calorimetry (DSC) was used to investigate the thermal behavior as well as the crystalinity of the blends. The effect of polymer matrix on the crystalline structure of PB-1 was studied using Wide Angle X-ray Diffraction (WAXD) and DSC. T-peel tests were carried out on the heat sealed films at various seal temperatures. The effect of MA content and heat seal temperature on peel/seal properties (i.e. peel initiation temperature, temperature window of sealability and peel strength) of the films were studied.

  14. Spectroscopy of a Gamma Irradiated Poly(Acrylic Acid)-Clotrimazole System

    Institute of Scientific and Technical Information of China (English)

    M.Todica; C.V.Pop; Luciana Udrescu; Traian Stefan

    2011-01-01

    A poly(acrylic acid)-clotrimazole system,gamma irradiated at different doses,is investigated by Raman spectroscopy.Modifications of the spectrum of the polymeric matrix appear for doses of radiation greater than 333 Gy,whereas the spectrum of clotrimazole remains unaffected at these doses of radiation.These changes correlate with modification of the vibration modes of COOH and CH2 groups of a polymeric matrix after irradiation.%A poly(acrylic acid)-clotrimazole system, gamma irradiated at different doses, is investigated by Raman spec-troscopy. Modifications of the spectrum of the polymeric matrix appear for doses of radiation greater than 333 Gy, whereas the spectrum of clotrimazole remains unaffected at these doses of radiation. These changes correlate with modification of the vibration modes of COOH and CH2 groups of a polymeric matrix after irradiation.

  15. The transversal strength of acrylic resin plate after being immersed soaking in noni fruit (Morinda citrifolia Linn. juice

    Directory of Open Access Journals (Sweden)

    Sri Redjeki Indiani

    2008-06-01

    Full Text Available The disadvantages of acrylic resin plate are liquid absorption and porosity, allowing microorganisms to grow and multiply resulting in inflammation in the oral cavity. The juice of the noni fruit (Morinda citrifolia Linn. contains active flavonoid and atsiri oil. Flavonoid is a phenol substance that degrades acrylic resin plate in prolonged contact. The purpose of this study was to examine the transversal strength of acrylic resin plate after being immersed in noni fruit juice. An acrylic resin plate of 65 × 10 × 2.5 mm was immersed in 4%, 6%, 8%, 10%, and 12% concentrations of noni fruit juice and distilled water in a control group for 31, 46, and 61 days. The transversal strength of acrylic resin plate was tested using an autograph with a crosshead speed of 1/10mm/second; the distance for the two supporting parts was 50 mm. The data was analyzed by using a One–Way ANOVA test. There was no significant difference in the transversal strength of the plate after being soaked for 31, 46, and 61 days in 4%, 6%, 8%, 10%, and 12% concentrations of the juice. This study showed that the soaking of acrylic resin plate for 31, 46, and 61 days in 4%, 6%, 8%, 10%, and 12% concentrations of noni fruit juice does not decrease the transversal strength.

  16. The intensity of immunogold labeling of deplasticized acrylic sections compared to deplasticized epoxy sections-Theoretical deductions and experimental data.

    Science.gov (United States)

    Brorson, Sverre-Henning; Reinholt, Finn P

    2008-01-01

    The purpose of this study was to compare the level of immunogold labeling of deplasticized acrylic sections and deplasticized epoxy sections. Pure protein gels of IgG, albumin and thyroglobulin were produced by glutaraldehyde fixation and embedded in non-crosslinked acrylic resin (Technovit 9100) and epoxy resin (Epon 812), respectively. Ultrathin sections of acrylic and epoxy resin were separately deplasticized in 2-methoxyethyl acetate (MEA) and sodium ethoxide. Quantitative immunogold labeling was performed with anti-IgG, anti-albumin and anti-thyroglobulin antibodies on sections of the corresponding protein gels. For all antibodies tested, the intensity of labeling for deplasticized acrylic sections was significantly higher (two to four times) than for the corresponding deplasticized epoxy sections. The results fit with a theoretically deduced relation: the quotient of the labeling of two deplasticized sections of different resins is equivalent to the square root of the quotient of the labeling of the similar sections not exposed to any kind of pre-treatment. The practical significance of the results is that immunolabeling of deplasticized non-crosslinked acrylic resin results in more intense immunogold labeling than deplasticized epoxy sections. Deplasticizing is most useful when the requirements for ultrastructural preservation according to conventional criteria are moderate. Our theoretically deduced results also indicate that deplasticized Technovit (or other non-crosslinked acrylic resins) sections will be significantly better suited for immunolabeling at the light microscopic level than deplasticized epoxy sections.

  17. A Study on Effect of Surface Treatments on the Shear Bond Strength between Composite Resin and Acrylic Resin Denture Teeth.

    Science.gov (United States)

    Chatterjee, Nirmalya; Gupta, Tapas K; Banerjee, Ardhendu

    2011-03-01

    Visible light-cured composite resins have become popular in prosthetic dentistry for the replacement of fractured/debonded denture teeth, making composite denture teeth on partial denture metal frameworks, esthetic modification of denture teeth to harmonize with the characteristics of adjacent natural teeth, remodelling of worn occlusal surfaces of posterior denture teeth etc. However, the researches published on the bond strength between VLC composite resins and acrylic resin denture teeth is very limited. The purpose of this study is to investigate the effect of five different methods of surface treatments on acrylic resin teeth on the shear bond strength between light activated composite resin and acrylic resin denture teeth. Ninety cylindrical sticks of acrylic resin with denture teeth mounted atop were prepared. Various treatments were done upon the acrylic resin teeth surfaces. The samples were divided into six groups, containing 15 samples each. Over all the treated and untreated surfaces of all groups, light-cured composite resin was applied. The shear strengths were measured in a Universal Testing Machine using a knife-edge shear test. Data were analyzed using one way analysis of variance (ANOVA) and mean values were compared by the F test. Application of bonding agent with prior treatment of methyl methacrylate on the acrylic resin denture teeth resulted in maximum bond strength with composite resin.

  18. Tuning of thermally induced sol-to-gel transitions of moderately concentrated aqueous solutions of doubly thermosensitive hydrophilic diblock copolymers poly(methoxytri(ethylene glycol) acrylate)-b-poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid).

    Science.gov (United States)

    Jin, Naixiong; Zhang, Hao; Jin, Shi; Dadmun, Mark D; Zhao, Bin

    2012-03-15

    We report in this article a method to tune the sol-to-gel transitions of moderately concentrated aqueous solutions of doubly thermosensitive hydrophilic diblock copolymers that consist of two blocks exhibiting distinct lower critical solution temperatures (LCSTs) in water. A small amount of weak acid groups is statistically incorporated into the lower LCST block so that its LCST can be tuned by varying solution pH. Well-defined diblock copolymers, poly(methoxytri(ethylene glycol) acrylate)-b-poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid) (PTEGMA-b-P(DEGEA-co-AA)), were prepared by reversible addition-fragmentation chain transfer polymerization and postpolymerization modification. PTEGMA and PDEGEA are thermosensitive water-soluble polymers with LCSTs of 58 and 9 °C, respectively, in water. A 25 wt % aqueous solution of PTEGMA-b-P(DEGEA-co-AA) with a molar ratio of DEGEA to AA units of 100:5.2 at pH = 3.24 underwent multiple phase transitions upon heating, from a clear, free-flowing liquid (sol-to-gel transition temperature (T(sol-gel)) shifted to higher values, while the gel-to-sol transition (T(gel-sol)) and the clouding temperature (T(clouding)) of the sample remained essentially the same. These transitions and the tunability of T(sol-gel) originated from the thermosensitive properties of two blocks of the diblock copolymer and the pH dependence of the LCST of P(DEGEA-co-AA), which were confirmed by dynamic light scattering and differential scanning calorimetry studies. Using the vial inversion test method, we mapped out the C-shaped sol-gel phase diagrams of the diblock copolymer in aqueous buffers in the moderate concentration range at three different pH values (3.24, 5.58, and 5.82, all measured at ~0 °C). While the upper temperature boundaries overlapped, the lower temperature boundary shifted upward and the critical gelation concentration increased with the increase of pH. The AA content in PTEGMA-b-P(DEGEA-co-AA) was found to have a significant

  19. Biodegradation kinetic of organic compounds of acrylic fiber wastewater in biofilm

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ya-lei; ZHAO Jian-fu; GU Guo-wei

    2003-01-01

    A group function relation curve between flux (J) and bulk phase concentration of substrate ( S ) was set up. The biodegradation kinetic of organic compounds of acrylic fiber wastewater in biofilm is studied ( the treatment technology is coagulation/sedimentation-anoxic/aerobic biofilm process), and the results showed that the concentration of non-degradation pollutants in effluent is 77 mg/L. In aerobic zone,corresponds to the fact that there are some biorefractory compounds in the wastewater.

  20. Ethyl 3-(4-hydroxy-phen-oxy)-2-(4-methoxy-phen-yl)acrylate.

    Science.gov (United States)

    Hou, Jin

    2008-11-08

    In the title compound, C(18)H(18)O(5), the dihedral angle between the two benzene rings is 55.2 (3)°. The ethyl acrylate linkage is planar and forms dihedral angles of 21.3 (3) and 41.0 (3)°, respectively, with the hydroxy-phenyl and methoxy-phenyl rings. In the crystal structure, mol-ecules are linked into zigzag chains along the b axis by O-H⋯O hydrogen bonds.

  1. A temporary space maintainer using acrylic resin teeth and a composite resin.

    Science.gov (United States)

    Kochavi, D; Stern, N; Grajower, R

    1977-05-01

    A one-session technique for preparing a temporary space maintainer has been described. The technique consists of attaching an acrylic resin pontic to etched surfaces of natural adjacent teeth by means of a composite resin. The main advantages of this technique are elimination of premature tooth preparation, good esthetics, fair strength, low cost, and rapid completion of the restoration without the need of a dental laboratory.

  2. Gold Nanoparticles Protected with Thiol-Derivatized Amphiphilic Poly( -caprolactone)-b-poly(acrylic acid)

    DEFF Research Database (Denmark)

    Javakhishvili, Irakli; Hvilsted, Søren

    2008-01-01

    Amphiphilic poly(c-caprolactone)-b-poly(acrylic acid) (HS-PCL-b-PAA) bearing thiol functionality at the PCL terminal has been synthesized by a combination of ring-opening polymerization (ROP) of c-caprolactone (c-CL), esterification of hydroxy chain end with protected mercaptoacetic acid, subsequ....... As a result stable, aggregation-free nanopaticles with moderate dispersity as estimated from UV-visible spectroscopy and transmission electron microscopy (TEM) data were obtained....

  3. Evaluation of in vitro glistening formation in hydrophobic acrylic intraocular lenses

    OpenAIRE

    Thomes BE; Callaghan TA

    2013-01-01

    Brett E Thomes, Thomas A CallaghanAlcon Research Ltd (A Novartis Company), Fort Worth, TX, USAPurpose: To evaluate the impact of continuous manufacturing process improvements on glistening formation in AcrySof hydrophobic acrylic intraocular lenses (IOLs) by comparing lenses manufactured in 2003 with lenses manufactured in 2012.Methods: Glistenings were experimentally created as aqueous-filled microvacuoles utilizing an accelerated laboratory method by immersing the lens in water at 45&de...

  4. Modification of polyethylene by radiation-induced graft polymerization of acrylic acid

    Science.gov (United States)

    Sidorova, L. P.; Aliev, A. D.; Zlobin, V. B.; Aliev, R. E.; Chalykh, A. E.; Kabanov, V. Ya.

    The kinetics investigation of the radiation-induced graft polymerization of acrylic acid onto low density polyethylene by direct method in aqueous solution in the presence of Mohr's salt, was performed. The technique of the contrasting of polyacrylic acid (PAA) graft layer was worked out by Ag +-ions. The structural and morphological peculiarities of grafted copolymers of PE with PAA were determined by the method of electron probe, and X-ray microanalysis by means of the electron microscopy.

  5. Transformation of Nickelalactones to Methyl Acrylate: On the Way to a Catalytic Conversion of Carbon Dioxide

    KAUST Repository

    Lee, S. Y. Tina

    2011-08-26

    Mu-nick: The methyl iodide-mediated ring opening of nickelalactones, which can be formed by oxidative coupling of carbon dioxide and ethylene at Ni 0 complexes, induces β-H elimination, producing methyl acrylate in yields of up to 56 %. This reaction is found to be very sensitive to the ligands coordinated to the central nickel atom. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Comparative study between novel self cross-linking and conventional fluorinated acrylic latex

    Institute of Scientific and Technical Information of China (English)

    Li Jun Chen

    2011-01-01

    Novel self cross-linking fluorinated acrylic latex (SCLFAL) has been successfully prepared via starved seeded semi-batch emulsion polymerization. The resultant SCLFAL is characterized by Fourier transform infrared (FTTR) spectrometry. Contact angle (CA) and glass transition temperature (Tg) of the film are investigated. Results show that CA and Tg of the film can be improved when the moderate amount of HPMA is introduced into the mixed monomers.

  7. Synthesis and Application of a New Acrylic Ester Resin for Recycling SIPA from its Water Solution

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A new acrylic ester polymer YWB-7 resin was prepared and characterized. The properties of YWB-7 resin were compared with those of the commercial Amberlite XAD-7, Diaion HP2MG and hypercrosslinked macroporous polymer NDA-150 resins. Both surface area and micropore area of YWB-7 resin were bigger than those of XAD-7 resin and HP2MG resin. The YWB-7 resin was successfully employed to recycle 5-sodiosulfoisophthalic acids (SIPA) from its solutions with and without methanol.

  8. CHARACTERIZATION OF RADIATION GRAFTING DEGREE OF POLYSTYRENE g-ACRYLIC ACID BY XPS

    Institute of Scientific and Technical Information of China (English)

    CHE Jitai; ZHANG Wanxi

    1990-01-01

    It this work, characterization of radiation grafting degree of polystyrene-g-acrylic acid by XPS was studied. It is found that along with the main peak C1s there is a photoelectron peak at 289.0 eV that appears to be C1s of -C(=O)-OH group and shows the presence ofpolyacrylic acid grafted on the polystyrene.The grafting degree obtained by XPS is in agreement with that from the gravimetric method.

  9. Fast-Curing Epoxy and Acrylate Adhesive Development for Adverse Marine Conditions

    Science.gov (United States)

    2013-07-01

    the bulk properties of the adhesive. Water contact can reduce the glass transition temperature, induce cracks, or initiate hydrolysis in which the...bond strengths in acrylate adhesives with high solvent content (9, 10). It was noted that these adhesives repelled water from the surface of wet...Hydrophobic solvents were tested to determine their ability to repel water from the adhesive bonding area and in order to improve adhesion. An initial water

  10. Modification of hydrophobic polypeptide-based film by blending with hydrophilic poly(acrylic acid)

    OpenAIRE

    Guoquan Zhu; Fagang Wang; Qiaochun Gao; Yuying Liu

    2013-01-01

    In this study, a series of poly(γ-benzyl L-glutamate)/poly(acrylic acid) (PBLG/PAA) polymer blend films were prepared by casting the polymer blend solution in dimethylsulfoxide (DMSO). The structure and morphology of the polymer blend film were investigated by Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM). Thermal, mechanical, and chemical properties of PBLG/PAA polymer blend films were studied by Differential Scanning Calorimetry (DSC), Thermogra...

  11. Effect of different solutions on color stability of acrylic resin-based dentures

    Directory of Open Access Journals (Sweden)

    Marcelo Coelho Goiato

    2014-01-01

    Full Text Available The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beverage solutions on the color stability of four different acrylic resin-based dentures (Onda Cryl, OC; QC20, QC; Classico, CL; and Lucitone, LU. The factors evaluated were type of acrylic resin, immersion time, and solution (mouthwash or beverage. A total of 224 denture samples were fabricated. For each type of resin, eight samples were immersed in mouthwashes (Plax-Colgate, PC; Listerine, LI; and Oral-B, OB, beverages (coffee, CP; cola, C; and wine, W, and artificial saliva (AS; control. The color change (DE was evaluated before (baseline and after thermocycling (T1, and after immersion in solution for 1 h (T2, 3 h (T3, 24 h (T4, 48 h (T5, and 96 h (T6. The CIE Lab system was used to determine the color changes. The thermocycling test was performed for 5000 cycles. Data were submitted to three-way repeated-measures analysis of variance and Tukey's test (p < 0.05. When the samples were immersed in each mouthwash, all assessed factors, associated or not, significantly influenced the color change values, except there was no association between the mouthwash and acrylic resin. Similarly, when the samples were immersed in each beverage, all studied factors influenced the color change values. In general, regardless of the solution, LU exhibited the greatest DE values in the period from T1 to T5; and QC presented the greatest DE values at T6. Thus, thermocycling and immersion in the various solutions influenced the color stability of acrylic resins and QC showed the greatest color alteration.

  12. Investigation of the Pour Point Depression Ability of Polyalkyl Acrylate Additives After Sonication

    Science.gov (United States)

    Volkova, G. I.; Anufriev, R. V.; Yudina, N. V.; Tchaikovskaya, O. N.

    2016-12-01

    Effect of ultrasonic treatment on the molecular parameters of polymeric additives based on polyalkyl acrylate is investigated. The viscosity, temperature, and energy characteristics of high-wax crude oil and solutions of petroleum wax in decane and aviation fuel TS-1 in the presence of initial and ultrasonified additives are determined. Results obtained indicate that the pour point depression ability of the additives is not reduced after treatment in an ultrasonic field.

  13. Nanoparticles of Block Ionomer Complexes from Double Hydrophilic Poly(acrylic acid-b-poly(ethylene oxide-b-poly(acrylic acid Triblock Copolymer and Oppositely Charged Surfactant

    Directory of Open Access Journals (Sweden)

    Sun Yuelong

    2009-01-01

    Full Text Available Abstract The novel water-dispersible nanoparticles from the double hydrophilic poly(acrylic acid-b-poly(ethylene oxide-b-poly(acrylic acid (PAA-b-PEO-b-PAA triblock copolymer and oppositely charged surfactant dodecyltrimethyl ammonium bromide (DTAB were prepared by mixing the individual aqueous solutions. The structure of the nanoparticles was investigated as a function of the degree of neutralization (DN by turbidimetry, dynamic light scattering (DSL,ζ-potential measurement, and atomic force microscope (AFM. The neutralization of the anionic PAA blocks with cationic DTAB accompanied with the hydrophobic interaction of alkyl tails of DTAB led to formation of core–shell nanoparticles with the core of the DTAB neutralized PAA blocks and the shell of the looped PEO blocks. The water-dispersible nanoparticles with negative ζ-potential were obtained over the DN range from 0.4 to 2.0 and their sizes depended on the DN. The looped PEO blocks hindered the further neutralization of the PAA blocks with cationic DTAB, resulting in existence of some negative charged PAA-b-PEO-b-PAA backbones even when DN > 1.0. The spherical and ellipsoidal nature of these nanoparticles was observed with AFM.

  14. Properties of solvent-borne acrylic pressure-sensitive adhesives synthesized by a simple approach

    Directory of Open Access Journals (Sweden)

    2009-12-01

    Full Text Available Acrylic polymers are widely used for fabricating pressure-sensitive adhesives (PSAs with the inherent unique advantages of transparency and superior intrinsic adhesive properties over other polymer-based adhesives. In this study, we have developed and evaluated a method of obtaining by radical copolymerization PSAs for liquid crystalline (LCD applications. Various factors including the amount of monomers, amount of cross-linker, coating weight, dwell time and thermal treatment are investigated for further optimizing the properties of acrylic polymer based PSAs to meet the emerging strict requirements for practical uses related mainly to holding powder and peel strength. The results illustrate that novel crosslinking reagents coupled with the thermal treatment at 70°C can make the resultant PSAs with the improved adhesive properties. The coating weight variation from 10 to 40 g/m2 can significantly enhance the peel strength from 4.0 g/25 mm to 12.5 g/25 mm with about 310% increment. If the dwell time of PSAs with cross-linking reagent is more than 10 hrs, the peel strength can be reduced down to a suitable value to meet the criterion for use. Therefore, acrylic PSAs with peel strength less than 20 g/25 mm and holding power above 120 hrs were successfully synthesized by elaborately designing the reaction system, which are practically applicable for advanced industrial applications.

  15. Comparison of photopolymerizable thiol-ene PEG and acrylate-based PEG hydrogels for cartilage development.

    Science.gov (United States)

    Roberts, Justine J; Bryant, Stephanie J

    2013-12-01

    When designing hydrogels for tissue regeneration, differences in polymerization mechanism and network structure have the potential to impact cellular behavior. Poly(ethylene glycol) hydrogels were formed by free-radical photopolymerization of acrylates (chain-growth) or thiol-norbornenes (step-growth) to investigate the impact of hydrogel system (polymerization mechanism and network structure) on the development of engineered tissue. Bovine chondrocytes were encapsulated in hydrogels and cultured under free swelling or dynamic compressive loading. In the acrylate system immediately after encapsulation chondrocytes exhibited high levels of intracellular ROS concomitant with a reduction in hydrogel compressive modulus and higher variability in cell deformation upon compressive strain; findings that were not observed in the thiol-norbornene system. Long-term the quantity of sulfated glycosaminoglycans and total collagen was greater in the acrylate system, but the quality resembled that of hypertrophic cartilage with positive staining for aggrecan, collagens I, II, and X and collagen catabolism. The thiol-norbornene system led to hyaline-like cartilage production especially under mechanical loading with positive staining for aggrecan and collagen II and minimal staining for collagens I and X and collagen catabolism. Findings from this study confirm that the polymerization mechanism and network structure have long-term effects on the quality of engineered cartilage, especially under mechanical loading.

  16. Preparation and characterization of high salts polymer electrolyte based on poly(lithium acrylate)

    Institute of Scientific and Technical Information of China (English)

    TANG Ai-dong; HUANG Ke-long; PAN Chun-yue; LU Cui-hong

    2005-01-01

    Novel polymer electrolytes were prepared by highly mixing poly(lithium acrylate)(PPALi) with eutectic lithium salts of lithium acetate and lithium nitrate.Poly(lithium acrylate) was preparaed by inverse emulsion polymerization from crylic acid and LiOH.Phase transition temperatures were measured for all the eutectic lithium of binary system samples as a function of the concentration of Li(CH3 COO),and the mixtures exhibit the lowest phase transition temperatures of (448±2) K at about 50% (mass fraction) Li(CH3 COO).Thermogravimetry(TG)and X-ray diffraction(XRD) analysis indicate the formation of a novel polymer-salt complex.The highest conductivity(approximately 4.97 ×10-5S·cm-1) is found at room temperature with the electrolyte composition of eutectic mixture of about 80% (mass fraction),poly(lithium acrylate) 20% under quickly cooling condition,which is 150%higher than that under natural cooling condition.

  17. The Effect of Using Modified Flask on the Porosity of Processed Heat- Cure Acrylic Resin

    Directory of Open Access Journals (Sweden)

    Mohammed T. Al-Khafagy

    2013-04-01

    Full Text Available Porosity is an important property of acrylic resin material because it affect other properties like strength, esthetic and cause bacterial or fungal growth lead to unhealthy dentures. This paper Study the possibility of reducing the porosity of heat- cure acrylic resin by making a modification in the flask of processing .The processing flask was modified by constructing a tongue like projection fixed to the upper half of the flask in order to spread the high temperature occurred in the center of the muffle. In the this research; forty lower denture base with bite rim samples were prepared from heat-cure acrylic resin denture base. The study include 4 testing groups depending on the type of curing cycle and using of ordinary traditional and modified flask in curing process, each group contain 10 samples. One way ANOVA with Tukey's test between tested groups in regarding the type of flasking and curing cycle are indicated, the results revealed a significant difference at (P=0.05 when compare between group 2(I.I.O.Fand 3(S.C.M.F and between group2and 4(S.C.O.F, and also between group 3and 4. While there was a non significant differences between group 1,2 and1,3 and finally between group1and4. Less Porosity was observed in the group of samples that cured with slow curing cycle in modified flask when compare with other groups.

  18. Synthesis, characterization, swelling and dye adsorption properties of starch incorporated acrylic gels.

    Science.gov (United States)

    Mandal, Bidyadhar; Ray, Samit Kumar

    2015-11-01

    Several hydrogels were prepared by a free radical polymerization of acrylic acid (AA), sodium acrylate (SA) and AA/hydroxy ethyl methacrylate (HEMA) in the presence of starch in water. These starch incorporated acrylic gels were prepared by varying the concentration of the initiator, monomer, crosslinker and the starch. The resulting gels were characterized by FTIR, SEM, XRD, DTA-TGA, pH at point zero charge (PZC), swelling and the diffusion in water. The gels showed high adsorption and removal% of Safranine T (ST) and Brilliant Cresyl Blue (BCB) dyes from water. The swelling and the adsorption data were fitted to different kinetic models and isotherms. Amongst the three kinds of gels, the starch incorporated sodium polyacrylate gel showed the highest adsorption of 9.7-85.3mg/L (97-61% removal) of BCB dye and 9.1-83mg/L (91-60% removal) of ST dye for a feed dye concentration of 10-140mg/L.

  19. Electron beam curing of acrylated epoxy resins for anisotropic conductive film application

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Tae gyu; Lee, Inhyuk; Lee, Jungmin [Department of Physics and Institute of Nanoscience and Nanotechnology, Hanyang University, Seoul, 133-791 (Korea, Republic of); Hwang, Jinyoung; Chung, Hoeil [Department of Chemistry, Hanyang University, Seoul, 133-791 (Korea, Republic of); Shin, Kwanwoo [Department of Chemistry and Interdisciplinary Program of Integrated Biotechnology, Institute of Biological Interfaces, Sogang University, Seoul 121-742 (Korea, Republic of); Seo, Young soo [Department of Nanoscience Technology, Sejong University, Seoul, 143-747 (Korea, Republic of); Kim, Jaeyong, E-mail: kimjy@hanyang.ac.kr [Department of Physics and Institute of Nanoscience and Nanotechnology, Hanyang University, Seoul, 133-791 (Korea, Republic of)

    2013-11-29

    Radiation curable acrylated epoxy oligomer was found to be an effective resin system for application to electron beams (EB) on curing of anisotropic conducting film. To study curing degree as a function of EB dosage, we irradiated bisphenol-A type acrylate epoxy oligomer samples with doses of 5 to 600 kGy of EB. To investigate the effect of a metal barrier for potential industrial application, a 3 mm thick Al plate was placed in front of the samples, and the curing parameters were compared with the ones irradiated without an Al plate. As the dosage of the EB irradiation was increased, the glass transition temperature of the sample ranged from 46.8 to 62.2 °C for the epoxy composites without placing an Al plate, and from 46.4 to 64.1 °C for their counterparts with a 3 mm thick Al plate. These results confirm that enhancement of the curing degree with increasing EB irradiation is possible even in the presence of a metal plate. The scanning electron microscope images of the fracture surfaces are presented as evidence of the morphological changes of the EB cured epoxy samples. - Highlights: ► Acrylated epoxy oligomer was cured by irradiation of the electron beam. ► Curing degree was increased with increasing dosage of the electron beam. ► Electron beam can be used for the bonding of anisotropic conducting films.

  20. SYNTHESIS OF ACRYLIC ESTERS IN PHASE TRANSFER CATALYSIS: KINETICS AND ECOLOGICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    GAGIK TOROSYAN

    2012-06-01

    Full Text Available Phase-Transfer Catalysis (PTC technology is used in the commercial manufacture and also in pollution mitigation treatment processes. In the paper is demonstrated the synthesis of esters of acrylic and metacrylic acids, which have wide applications in the industry for the synthesis of unique polymeric materials, by phase transfer catalysis method. It is necessary to notice that the synthesis of acrylic acids in PTC medium is more important because that compounds are more sensitive at acidic and basic conditions. Here is shown that the offered method has more advantages in comparison with the traditional methods. PTC is characterized by a higher degree of conversion of raw materials into useful products, smaller material and power resources consumption. The offered method for acrylic ester synthesis in comparison with the traditional methods has more advantages: higher process rates, mild reaction conditions, allowing lower energy costs, the complete elimination of hazardous and dangerous organic solvents, all leading to a sharp reduction of air pollution, and volume of generated wastewaters.

  1. Acrylic acid polymerization and its graft copolymerization to poly(ethylene oxide) by gamma rays

    Energy Technology Data Exchange (ETDEWEB)

    Hochberg, A.

    1984-01-01

    Free radical initiated polymerization of acrylic acid was investigated in methanol-water solutions with and without poly(ethylene oxide) (PEO). The formation of poly(acrylic acid) (PAA) initiated both by gamma irradiation and water soluble azo initiators was found to follow classical free radical kinetics. A significant increase in the rate of the propagation step (together with the degree of polymerization) was observed as the water fraction of the medium increased. During homogeneous polymerization of acrylic acid in methanol-water solutions containing poly(ethylene oxide), PAA grafting efficiency was found to be 67% and independent of initiation rate and yield. A mechanism of grafting to poly(ethylene oxide) was proposed. Chain transfer to PEO (K/sub tr/ = 6.5 x 10/sup -5/) was found to be the dominant mechanism for graft formation. Drag reduction characteristics of these PEO-PAA graft copolymers were measured in dilute aqueous solutions as a function of Reynolds number and solution pH. PEO graft copolymers containing 45% by mole PAA graft had, in neutral and basic solutions, drag reduction characteristics equivalent on a mass basis to the initial PEO. However at low pH, drag reduction characteristics disappeared as the PEO-PAA coacervate formed.

  2. A liquid-film forming acrylate cream for the treatment of anal pruritus.

    Science.gov (United States)

    Tomi, Nordwig; Weiser, Rudolf; Strohal, Robert; Mittlboeck, Martina

    Pruritus ani is a hidden but frequently occurring clinical condition, with a large impact on patients' quality of life. Currently, therapeutic options are scarce, offering mainly limited success. The authors performed a prospective, open-label, two-centre pilot study to analyse the efficacy and safety of a liquid-film forming acrylate cream for the treatment of pruritus ani and peri-anal skin irritation. A total of 28 patients were included and applied the cream to the cleansed anal and peri-anal skin once daily for a study period of 3-4 weeks. The primary outcome measure was the reduction of pruritis ani, comparing day 0 to day 28 results. For this purpose, a visual analog scale (VAS) was used. Secondary parameters included the physician global assessment score (PGA) of peri-anal skin condition, assessment of patients' quality of life using a specifically designed quality of life scoring tool, and patient satisfaction with the treatment regimen. The application of the acrylate skin protection cream resulted in a fast and substantial improvement of all study parameters, with a high score for patient satisfaction. The cream was well tolerated without any adverse events noted during the study period. The authors' pilot study has generated initial evidence that the acrylate skin protection cream may be effective for the treatment of pruritus ani. However, further randomized controlled studies are needed to confirm the authors' findings.

  3. Thermal preparation of chitosan-acrylic acid superabsorbent: optimization, characteristic and water absorbency.

    Science.gov (United States)

    Ge, Huacai; Wang, Senkang

    2014-11-26

    Chitosan-acrylic acid superabsorbent polymer was successfully prepared by the thermal reaction without using initiator and crosslinker in air. The effects of some reaction variables on the water absorbency of this polymer were investigated by orthogonal tests, and the optimal conditions were described. The influences of temperature, time, ratio of the reactants and neutralization degree of acrylic acid on the reaction were further studied. These polymers were also prepared in nitrogen atmosphere and by using a radical initiator and compared against thermal reaction obtained polymers. The structures of the polymers were characterized by FT-IR, TGA, XRD, (13)C NMR and elemental analyses. The results showed that the thermal reaction product of acrylic acid with chitosan might form N-carboxyethyl grafted and amide-linked polymer and this product could absorb water 644 times its own dry weight. The possible mechanism for the thermal reaction was further suggested. The purpose of this research was to explore the friendly synthesized method of the superabsorbent.

  4. Bond Strength of Repaired Acrylic Denture Teeth Using Visible Light Cure Composite Resin.

    Science.gov (United States)

    Muhsin, Saja Ali

    2017-01-01

    Although bonding to denture teeth after surface treatment with chemical agents is desirable, there is little information on the use of Visible Light Cure composite resin (VLC) as bonding denture materials. To determine the effect of various surface treatments on shear bond strength between Visible Light Cure composite resin and the acrylic denture teeth interface. Forty cylindrical sticks of acrylic resin with denture teeth mounted atop were prepared. Various treatments were implemented upon the acrylic resin teeth surfaces. The samples were divided into four groups (n = 10). Light-cured composite resin (LC) was applied over all treated and untreated surfaces of tested groups. The shear bond was tested using a universal tensile testing apparatus with the knife-edge of a 0.8mm shear tester. Data were statistically analyzed using one-way ANOVA performed at a confidence level of 95% and significant P-value of (P ≤ 0.05). Analysis of variance (ANOVA) showed statistically significant difference (P resin denture teeth resulted in maximum bond strength with composite resin.

  5. Rehabilitation of post-traumatic total nasal defect using silicone and acrylic resin

    Science.gov (United States)

    Aggarwal, Vikas; Datta, Kusum; Kaur, Sukhjit

    2016-01-01

    Facial defects resulting from neoplasms, congenital abnormalities or trauma can affect the patient esthetically, psychologically, and even financially. Surgical reconstruction of large facial defects is sometimes not possible and frequently demands prosthetic rehabilitation. For success of such prosthesis, adequate replication of natural anatomy, color matching and blending with tissue interface are important criteria. Variety of materials and retention methods are advocated to achieve a functionally and esthetically acceptable restoration. Silicones are the most commonly used materials because of flexibility, lifelike appearance and ability to be used in combination with acrylic resin which is hard, provides body and helps in achieving retention to the prosthesis by engaging mechanical undercuts. Furthermore, the acrylic portion can be relined easily, thus helping comfortable wear and removal of the prosthesis by patient without traumatizing nasal mucosa. This case report describes time saving and cost effective prosthetic rehabilitation of a patient with total nasal defect using custom sculpted nasal prosthesis made up of silicone elastomer and acrylic resin, which is retained by engaging mechanical undercut and use of biocompatible silicone adhesive. PMID:27134434

  6. Optimization of acrylic acid grafting onto polypropylene using response surface methodology and its biodegradability

    Science.gov (United States)

    Mandal, Dev K.; Bhunia, Haripada; Bajpai, Pramod K.; Kushwaha, Jai P.; Chaudhari, Chandrasekhar V.; Dubey, Kumar A.; Varshney, Lalit

    2017-03-01

    Simultaneous radiation grafting was optimized to graft acrylic acid monomer on the polypropylene (PP) films to make them hydrophilic and enhance their biodegradability. Experiments were designed based on full factorial central composite design (response surface methodology) and influence of monomer concentration, radiation dose, inhibitor concentration, solvent concentration on degree of grafting was investigated. The extent of grafting was found to increase with increasing monomer concentration, inhibitor concentration and radiation dose. The targeted 35% grafting could be achieved at optimum condition viz. monomer concentration 12.09 wt%, radiation dose 12.40 kGy, inhibitor concentration 0.07 M and solvent concentration 0.12 M. The grafted PP films at different degrees of grafting were tested for tensile properties and characterized by swelling studies, fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Successful grafting of acrylic acid onto polypropylene films was indicated by FTIR and confirmed quantitatively by determination of carboxylic groups on the film surface. Tensile strength of grafted PP films decreased with increase in degree of grafting. The crystallinity of the grafted PP films was lower than that of PP film as indicated by DSC studies. Grafting of acrylic acid increased the roughness on the surface of PP films indicated by SEM studies. The maximum biodegradability of the 34.55% grafted film was 5.5%.

  7. Biocompatible Metal-Oxide Nanoparticles: Nanotechnology Improvement of Conventional Prosthetic Acrylic Resins

    Directory of Open Access Journals (Sweden)

    Laura S. Acosta-Torres

    2011-01-01

    Full Text Available Nowadays, most products for dental restoration are produced from acrylic resins based on heat-cured Poly(Methyl MethAcrylate (PMMA. The addition of metal nanoparticles to organic materials is known to increase the surface hydrophobicity and to reduce adherence to biomolecules. This paper describes the use of nanostructured materials, TiO2 and Fe2O3, for simultaneously coloring and/or improving the antimicrobial properties of PMMA resins. Nanoparticles of metal oxides were included during suspension polymerization to produce hybrid metal oxides-alginate-containing PMMA. Metal oxide nanoparticles were characterized by dynamic light scattering, and X-ray diffraction. Physicochemical characterization of synthesized resins was assessed by a combination of spectroscopy, scanning electron microscopy, viscometry, porosity, and mechanical tests. Adherence of Candida albicans cells and cellular compatibility assays were performed to explore biocompatibility and microbial adhesion of standard and novel materials. Our results show that introduction of biocompatible metal nanoparticles is a suitable means for the improvement of conventional acrylic dental resins.

  8. Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A novel acrylate inimer, 2-(2-chloroacetyloxy) ethyl acrylate, was prepared by the reaction of 2-hydroxyethyl acrylate with chloroacetyl chloride in the presence of triethylamine. The self-condensing vinyl living radical polymerization of the inimer was studied and the hyperbranched macromolecules containing ester linkages on their backbone were prepared. All the polymerization products were characterized by 1H NMR. The polymerization degree and the branching parameter were calculated based on the 1H NMR spectra. It has been shown that this inimer exhibits a very distinctive polymerization behavior. Similar to step-growth polymerization, the polymerization degree of the products formed increased exponentially during the early stage of the polymerization, and then the increasing rate slowed down. However, the inimer remained present throughout the polymerization consistent with conventional free radical polymerization. Also, if much longer polymerization time was used, the polymerization system would become gel due to the crosslinking reaction derived from radical-radical recombination. As a result of the unequal reactivity of -CH2Cl and >CHCl, an almost linear product was obtained at a molar ratio of bipy to inimer=0.05, while a relatively high ratio of bipy to inimer 1 favored the formation of the branched structure. The macromolecules formed at a high ratio of bipy to inimer 1 exhibited an excellent solubility in organic solvents such as acetone.

  9. Dimensional changes of acrylic resin denture bases: conventional versus injection-molding technique.

    Directory of Open Access Journals (Sweden)

    Jafar Gharechahi

    2014-08-01

    Full Text Available Acrylic resin denture bases undergo dimensional changes during polymerization. Injection molding techniques are reported to reduce these changes and thereby improve physical properties of denture bases. The aim of this study was to compare dimensional changes of specimens processed by conventional and injection-molding techniques.SR-Ivocap Triplex Hot resin was used for conventional pressure-packed and SR-Ivocap High Impact was used for injection-molding techniques. After processing, all the specimens were stored in distilled water at room temperature until measured. For dimensional accuracy evaluation, measurements were recorded at 24-hour, 48-hour and 12-day intervals using a digital caliper with an accuracy of 0.01 mm. Statistical analysis was carried out by SPSS (SPSS Inc., Chicago, IL, USA using t-test and repeated-measures ANOVA. Statistical significance was defined at P<0.05.After each water storage period, the acrylic specimens produced by injection exhibited less dimensional changes compared to those produced by the conventional technique. Curing shrinkage was compensated by water sorption with an increase in water storage time decreasing dimensional changes.Within the limitations of this study, dimensional changes of acrylic resin specimens were influenced by the molding technique used and SR-Ivocap injection procedure exhibited higher dimensional accuracy compared to conventional molding.

  10. Surface texture and some properties of acrylic resins submitted to chemical polishing.

    Science.gov (United States)

    Braun, K O; Mello, J A N; Rached, R N; Del Bel Cury, A A

    2003-01-01

    The effects of chemical polishing on dental acrylic resin properties are not well clarified. This study evaluated the effect of chemical and mechanical polishing on the residual monomer release (RM), Knoop hardness (KH), transverse strength (TS) and surface texture (ST) of a heat- and self-cured acrylic resin. Four groups were formed: GI-self-cured resin/mechanical polishing; GII-self-cured resin/chemical polishing; GIII-heat-cured resin/mechanical polishing; GIV-heat-cured resin/chemical polishing. Following the polishing procedures, specimens were stored in distilled water at 37 degrees C. The KH and RM measurements were taken after 1, 2, 8 and 32 days of storage, and TS after 2, 8 and 32 days. Surface texture was observed under SEM evaluation. Results were compared statistically at a confidence level of 95%. The following conclusions were drawn: (1) regardless of the acrylic resin and the period of analysis, chemical polishing increased RM levels, reduced KH, and did not affect TS significantly; (2) water storage increased the surface hardness of GII and GIV; (3) GII and GIV showed a smooth and wavy surface under SEM evaluation.

  11. Water Sorption and Flexural Strength of Thermoplastic and Conventional Heat-Polymerized Acrylic Resins

    Science.gov (United States)

    Hemmati, Mohammad Ali; Vafaee, Fariborz

    2015-01-01

    Objectives: The aim of this study was to assess and compare the water sorption and flexural strength of thermoplastic and conventional acrylic resins. Materials and Methods: Water sorption and flexural strength were compared between a thermoplastic modified polymethyl methacrylate (PMMA) denture base resin (group A) and a heat-polymerized PMMA acrylic resin (group B) as the control group (n=10). A three-point bending test was carried out for flexural strength testing. For water sorption test, 10 disc-shaped samples were prepared. After desiccating, the samples were weighed and immersed in distilled water for seven days. Then, they were weighed again, and desiccated for the second and third times. Differences between the mean values in the two groups were analyzed using Student’s t-test. Results: The mean value of water sorption was 14.74±1.36 μg/mm3 in group A, and 19.11±0.90 μg/mm3 in group B; this difference was statistically significant (PPMMA acrylic resins as denture base materials. PMID:26877737

  12. Adsorption of surfactants onto acrylic ester resins with different pore size distribution

    Institute of Scientific and Technical Information of China (English)

    YANG Weiben; LI Aimin; CAI Jianguo; MENG Guanhua; ZHANG Quanxing

    2006-01-01

    In this study, a series of acrylic ester resins with different pore size distribution were prepared successfully by varying the type and the amount of pore-forming agents. In order to investigate the adsorption behavior and mechanism of surfactants on acrylic ester resins, three kinds of surfactants were utilized as adsorbates that were sodium 6-dodecyl benzenesulfonate (6-NaDBS),sodium 1-dodecyl benzene sulfonate (1-NaDBS) and sodium 1-dodecyl sulfonate, respectively. It was observed that the surface area was available in a particular pore size and an appropriate pore size of resins appeared to be more important for the adsorption of surfactants. As compared to commercial acrylic ester resins XAD-7 and HP2MG, 50# and 38# resins exhibited more excellent adsorption properties toward 1-NaDBS and 6-NaDBS. The experimental equilibrium data were fitted to the Langmuir, and double-Langmuir models. Two models provided very good fittings for all resins over the temperature range studied. The investigation dicated that electrostatic attraction and hydrogen bond between resins and surfactants were the main forces and had an obvious effect on adsorption process.

  13. Hydrophobic acrylic hard coating by surface segregation of hyper-branched polymers

    Science.gov (United States)

    Haraguchi, Masayuki; Hirai, Tomoyasu; Ozawa, Masaaki; Miyaji, Katsuaki; Tanaka, Keiji

    2013-02-01

    The ability of hyperbranched polymers (HBPs) to preferentially segregate to the surface of its matrix owing to its unique structure makes it a good candidate as a surface modifier. One particular challenge in its application as an efficient surface modifier, however, is its possible elimination from the surface due to the lack of attachments between a HBP (modifier) and its host material (polymer matrix). Here, we present a novel approach to efficiently prevent the removal of HBPs from the surface of its host material by directly reacting a HBP containing fluoroalkyl segments (F-HBP) to a multi-functional acrylate monomer prior to curing. We also have characterized surface structure and wettability of the acrylic hard coating material by X-ray photoelectron spectroscopic and contact angle measurements, respectively. The results show that since F-HBP was segregated at the surface, the surface became hydrophobic and more stable. Thus, we claim that our approach results in the formation of a water-repellent acrylic hard coating material.

  14. Preparation of self-crosslinked acrylate emulsion with high elasticity and its rheological properties

    Institute of Scientific and Technical Information of China (English)

    CHEN Li-jun; WU Feng-qin; LI Dong-shuang; YANG Jian; LI Rong-xian

    2008-01-01

    Using butyl acrylate (BA), methyl methacrylate (MMA), methacrylic acid (MAA) and mixed emulsifier as raw materials, the self-crosslinked emulsion was prepared via pre-emulsified and semi-continuous seeded emulsion polymerization technology in the presence of N-hydroxymethyl acrylamide and poly solidum maleate. The influence of mass ratio of BA to MMA, amount of N-hydroxymethyl acrylamide and poly solidum maleate on the rheological properties of the self-crosslinked emulsion was studied. Possible cross-linked mechanism of self-crosslinked monomer was investigated. And the relationship between emulsion viscosity and shear rate was investigated. The results show that the self-crosslinked acrylate emulsion with high elasticity can be synthesized when the mass fractions of BA is 60%, MMA is 40%, and added amount of N-hydroxymethyl acrylamide is 2.5%-3.0% and added amount of poly solidum maleate is 0.3%-0.4%. The self-crosslinkage process of N-hydroxymethyl acrylamide involves two steps. One is copolymer zation of N-hydroxymethyl acrylamide and acrylate, the other is cross-linkage among polymer molecules via condensation reaction of methylol. The emulsion is of rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.

  15. Preparation and characterization of poly(acrylic acid)-hydroxyethyl cellulose graft copolymer.

    Science.gov (United States)

    Abdel-Halim, E S

    2012-10-01

    Poly(acrylic acid) hydroxyethyl cellulose [poly(AA)-HEC] graft copolymer was prepared by polymerizing acrylic acid (AA) with hydroxyethyl cellulose (HEC) using potassium bromate/thiourea dioxide (KBrO(3)/TUD) as redox initiation system. The polymerization reaction was carried out under a variety of conditions including concentrations of AA, KBrO(3) and TUD, material to liquor ratio and polymerization temperature. The polymerization reaction was monitored by withdrawing samples from the reaction medium and measuring the total conversion. The rheological properties of the poly(AA)-HEC graft copolymer were investigated. The total conversion and rheological properties of the graft copolymer depended on the ratio of KBrO(3) to TUD and on acrylic acid concentration as well as temperature and material to liquor ratio. Optimum conditions of the graft copolymer preparation were 30 mmol KBrO(3) and 30 mmol TUD/100g HEC, 100% AA (based on weight of HEC), duration 2h at temperature 50 °C using a material to liquor ratio of 1:10.

  16. A Potentiometric Formaldehyde Biosensor Based on Immobilization of Alcohol Oxidase on Acryloxysuccinimide-modified Acrylic Microspheres

    Directory of Open Access Journals (Sweden)

    Lee Yook Heng

    2010-11-01

    Full Text Available A new alcohol oxidase (AOX enzyme-based formaldehyde biosensor based on acrylic microspheres has been developed. Hydrophobic poly(n-butyl acrylate-N-acryloxy-succinimide [poly(nBA-NAS] microspheres, an enzyme immobilization matrix, was synthesized using photopolymerization in an emulsion form. AOX-poly(nBA-NAS microspheres were deposited on a pH transducer made from a layer of photocured and self-plasticized polyacrylate membrane with an entrapped pH ionophore coated on a Ag/AgCl screen printed electrode (SPE. Oxidation of formaldehyde by the immobilized AOX resulted in the production of protons, which can be determined via the pH transducer. Effects of buffer concentrations, pH and different amount of immobilization matrix towards the biosensor’s analytical performance were investigated. The formaldehyde biosensor exhibited a dynamic linear response range to formaldehyde from 0.3–316.2 mM and a sensitivity of 59.41 ± 0.66 mV/decade (R2 = 0.9776, n = 3. The lower detection limit of the biosensor was 0.3 mM, while reproducibility and repeatability were 3.16% RSD (relative standard deviation and 1.11% RSD, respectively (n = 3. The use of acrylic microspheres in the potentiometric formaldehyde biosensor improved the biosensor’s performance in terms of response time, linear response range and long term stability when compared with thick film immobilization methods.

  17. Thermodynamic Interactions between Polystyrene and Long-Chain Poly(n-Alkyl Acrylates) Derived from Plant Oils.

    Science.gov (United States)

    Wang, Shu; Robertson, Megan L

    2015-06-10

    Vegetable oils and their fatty acids are promising sources for the derivation of polymers. Long-chain poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) are readily derived from fatty acids through conversion of the carboxylic acid end-group to an acrylate or methacrylate group. The resulting polymers contain long alkyl side-chains with around 10-22 carbon atoms. Regardless of the monomer source, the presence of alkyl side-chains in poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) provides a convenient mechanism for tuning their physical properties. The development of structured multicomponent materials, including block copolymers and blends, containing poly(n-alkyl acrylates) and poly(n-alkyl methacrylates) requires knowledge of the thermodynamic interactions governing their self-assembly, typically described by the Flory-Huggins interaction parameter χ. We have investigated the χ parameter between polystyrene and long-chain poly(n-alkyl acrylate) homopolymers and copolymers: specifically we have included poly(stearyl acrylate), poly(lauryl acrylate), and their random copolymers. Lauryl and stearyl acrylate were chosen as model alkyl acrylates derived from vegetable oils and have alkyl side-chain lengths of 12 and 18 carbon atoms, respectively. Polystyrene is included in this study as a model petroleum-sourced polymer, which has wide applicability in commercially relevant multicomponent polymeric materials. Two independent methods were employed to measure the χ parameter: cloud point measurements on binary blends and characterization of the order-disorder transition of triblock copolymers, which were in relatively good agreement with one another. The χ parameter was found to be independent of the alkyl side-chain length (n) for large values of n (i.e., n > 10). This behavior is in stark contrast to the n-dependence of the χ parameter predicted from solubility parameter theory. Our study complements prior work investigating the interactions between

  18. Effect of Grafted Hydroquinone on the Acid-Base Properties of Poly(acrylic acid) in the Presence of Copper (II)

    OpenAIRE

    Nabila Bensacia; Saâd Moulay; François Garin; Ioana Fechete; Anne Boos

    2015-01-01

    Potentiometric titration of poly(acrylic acid) and hydroquinone-functionalized poly(acrylic acid) was conducted in the presence of copper (II). The effects of hydroquinone functionalizing and copper (II) complexing on the potentiometric titration of poly(acrylic acid) were studied in an ionic environment and in its absence. Henderson-Hasselbalch equation was applied to assess its validity for this titration. Coordination number and the stability constants of the copper- (II-)complexed polymer...

  19. An in vitro study on effect of Delmopinol application on Candida albicans adherence on heat cured denture base acrylic resin: A thorough study

    Directory of Open Access Journals (Sweden)

    Deshraj Jain

    2013-01-01

    Conclusion: Heat-cured acrylic resin shows greater reduction in adherence of Candida albicans by contamination after Delmopinol application as compared with contamination before Delmopinol application.

  20. Is the bond between acrylic resin denture teeth and denture base resin stronger if they are both made by the same manufacturer?

    Science.gov (United States)

    Patil, Reshma; Juszczyk, Andrzej S; Radford, David R; Clark, Robert K F

    2010-03-01

    A previous study suggested that a stronger bond may be achieved between acrylic resin denture base material and acrylic denture teeth when both are made by the same manufacturer. Three denture base acrylic resins from three different manufacturers were bonded to three different acrylic resin denture teeth, one of which was manufactured by each of the manufacturers of the base material. In each group there was a trend that the bond strength achieved between the teeth and base material from the same manufacturer was higher than the unmatched pairs but statistical significance was not achieved.

  1. Synthesis and Thermal Properties of Acrylonitrile/Butyl Acrylate/Fumaronitrile and Acrylonitrile/Ethyl Hexyl Acrylate/Fumaronitrile Terpolymers as a Potential Precursor for Carbon Fiber

    Directory of Open Access Journals (Sweden)

    Siti Nurul Ain Md Jamil

    2014-09-01

    Full Text Available A synthesis of acrylonitrile (AN/butyl acrylate (BA/fumaronitrile (FN and AN/EHA (ethyl hexyl acrylate/FN terpolymers was carried out by redox polymerization using sodium bisulfite (SBS and potassium persulphate (KPS as initiator at 40 °C. The effect of comonomers, BA and EHA and termonomer, FN on the glass transition temperature (Tg and stabilization temperature was studied using Differential Scanning Calorimetry (DSC. The degradation behavior and char yield were obtained by Thermogravimetric Analysis. The conversions of AN, comonomers (BA and EHA and FN were 55%–71%, 85%–91% and 76%–79%, respectively. It was found that with the same comonomer feed (10%, the Tg of AN/EHA copolymer was lower at 63 °C compared to AN/BA copolymer (70 °C. AN/EHA/FN terpolymer also exhibited a lower Tg at 63 °C when compared to that of the AN/BA/FN terpolymer (67 °C. By incorporating BA and EHA into a PAN system, the char yield was reduced to ~38.0% compared to that of AN (~47.7%. It was found that FN reduced the initial cyclization temperature of AN/BA/FN and AN/EHA/FN terpolymers to 228 and 221 °C, respectively, in comparison to that of AN/BA and AN/EHA copolymers (~260 °C. In addition, FN reduced the heat liberation per unit time during the stabilization process that consequently reduced the emission of volatile group during this process. As a result, the char yields of AN/BA/FN and AN/EHA/FN terpolymers are higher at ~45.1% and ~43.9%, respectively, as compared to those of AN/BA copolymer (37.1% and AN/EHA copolymer (38.0%.

  2. Pluronic-poly (acrylic acid)-cysteine/Pluronic L121 mixed micelles improve the oral bioavailability of paclitaxel.

    Science.gov (United States)

    Zhao, Yanli; Li, Yanli; Ge, Jianjun; Li, Na; Li, Ling-Bing

    2014-11-01

    The aim of the study is to synthesize a thiolated Pluronic copolymer, Pluronic-poly (acrylic acid)-cysteine copolymer, to construct a mixed micelle system with the Pluronic-poly (acrylic acid)-cysteine copolymer and Pluronic L121 (PL121) and to evaluate the potential of these mixed micelles as an oral drug delivery system for paclitaxel. Compared with Pluronic-poly (acrylic acid)-cysteine micelles, drug-loading capacity of Pluronic-poly (acrylic acid)-cysteine/PL121 mixed micelles was increased from 0.4 to 2.87%. In vitro release test indicated that Pluronic-poly (acrylic acid)-cysteine/PL121 mixed micelles exhibited a pH sensitivity. The permeability of drug-loaded micelles in the intestinal tract was studied with an in situ perfusion method in rats. The presence of verapamil and Pluronic both improved the intestinal permeability of paclitaxel, which further certified the inhibition effect of thiolated Pluronic on P-gp. In pharmacokinetic study, the area under the plasma concentration-time curve (AUC0→∞) of paclitaxel-loaded mixed micelles was four times greater than that of the paclitaxel solution (p cysteine/PL121 micelles were proven to be a potential oral drug delivery system for paclitaxel.

  3. Anti-fouling ultrafiltration membrane prepared from polysulfone-graft-methyl acrylate copolymers by UV-induced grafting method

    Institute of Scientific and Technical Information of China (English)

    HUA Helin; LI Na; WU Linlin; ZHONG Hui; WU Guangxia; YUAN Zonghuan; LIN Xiangwei; TANG Lianyi

    2008-01-01

    Membrane fouling is one of the most important challenges faced in membrane ultrafiltration operations. The copolymers of polysulfone-graft-methyl acrylate were synthesized by homogeneous photo-initiated graft copolymerization. The variables affecting the degree of grafting, such as the time of UV(Ultraviolet-visible)irradiation and the concentrations of the methyl acrylate and photoinitiator, were investigated. The graft copolymer membranes were prepared by the phase inversion method. The chemical and morphological changes were characterized by attenuated total reflection-Fourier transform infrared spectroscopy(ATR/FT-IR), scanning electron microscopy, and water contact angles measurements. Results revealed that methyl acrylate groups were present on the membranes and the graft degree of methyl acrylate had remarkable effect on the performance of membranes. Pure water contact allgle on the membrane surface decreases with the increase of methyl acrylate graftdegree. which indicated that the hydrophilicity of graft copolymer membranes Was improved. The permeation fluxes of pure water and bovine serum albumin solution were measured to evaluate the antifouling property of graft copolymer membranes, the results of which have shown an enhancement of antifouling property for graft copoly mermembranes.

  4. Anti-fouling ultrafiltration membrane prepared from polysulfone-graft-methyl acrylate copolymers by UV-induced grafting method.

    Science.gov (United States)

    Hua, Helin; Li, Na; Wu, Linlin; Zhong, Hui; Wu, Guangxial; Yuan, Zonghuan; Lin, Xiangwei; Tang, Lianyi

    2008-01-01

    Membrane fouling is one of the most important challenges faced in membrane ultrafiltration operations. The copolymers of polysulfone-graft-methyl acrylate were synthesized by homogeneous photo-initiated graft copolymerization. The variables affecting the degree of grafting, such as the time of UV (Ultraviolet-visible) irradiation and the concentrations of the methyl acrylate and photoinitiator, were investigated. The graft copolymer membranes were prepared by the phase inversion method. The chemical and morphological changes were characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FT-IR), scanning electron microscopy, and water contact angles measurements. Results revealed that methyl acrylate groups were present on the membranes and the graft degree of methyl acrylate had remarkable effect on the performance of membranes. Pure water contact angle on the membrane surface decreases with the increase of methyl acrylate graft degree, which indicated that the hydrophilicity of graft copolymer membranes was improved. The permeation fluxes of pure water and bovine serum albumin solution were measured to evaluate the antifouling property of graft copolymer membranes, the results of which have shown an enhancement of antifouling property for graft copolymer membranes.

  5. The effect of nail polish and acrylic nails on pulse oximetry reading using the Lifebox oximeter in Nigeria.

    Science.gov (United States)

    Desalu, I; Diakparomre, O I; Salami, A O; Abiola, A O

    2013-12-01

    AIMS AND OBJECTIVES - Pulse oximetry is mandatory during anaesthesia, sedation and transfer of critically ill patients. The effect of nail polish and acrylic nails on the accuracy of saturation reading is inconsistent. The Lifebox pulse oximeter is reliable and recommended for low and middle income countries. We investigated its accuracy in the presence of 4 nail colours and acrylic nails SUBJECTS AND METHODS Fifty non-smoking volunteers had their fingers numbered from right to left (little finger of right hand =1 and little finger of left hand =10). Alternate fingers were nails painted with clear, red, brown and black nail polish and the 5th finger had acrylic nail applied. The corresponding finger on the other hand acted as control. The oxygen saturation was determined using the Lifebox pulse oximeter. Results All fingers (100%) with clear nail polish, red nail polish and acrylic nails recorded a saturation value. Each of the mean saturation value for clear nail polish, red nail polish and acrylic nails was not significantly different from the control mean (p= 0.378, 0.427 and 0.921). Only 12% and 64% of nails polished black and brown respectively recorded a saturation value. The mean SpO- for black and brown polish were significantly different from their control mean (ppolish resulted in a significant decrease in SpO with the Lifebox oximeter. Dark coloured nail polish should be removed prior to SpO2 determination to ensure that accurate readings can be obtained.

  6. In vitro antifungal action of different substances over microwaved-cured acrylic resins

    Directory of Open Access Journals (Sweden)

    Henrique Montagner

    2009-10-01

    Full Text Available OBJECTIVE: The presence of Candida albicans on the surfaces of denture-base acrylic resins is strongly related to the development of oral stomatitis. This study evaluated the antifungal action of different agents over microwave-cured acrylic resin without polishing specimens previously contaminated with Candida albicans. MATERIAL AND METHODS: Sixty specimens were immersed in BHI broth previously inoculated with the yeast and stored for 3 h at 37ºC. They were divided into 5 experimental groups (n=10: G1: 2% chlorhexidine solution (10 min; G2: 0.5% sodium hypochlorite (10 min; G3: modified sodium hypochlorite (10 min; G4: effervescent agent (5 min; G5: hydrogen peroxide 10v (30 min. The specimens of the control group 1 (C1 were not disinfected. Ten additional specimens of the control group 2 (C2 were not infected with the yeast, aiming to check the asepsis during the experiment. The disinfection agents were neutralized and the acrylic resin specimens were immersed in BHI Broth for 24 h. Culture media turbidity was evaluated spectrophotometrically according to the transmittance degree, i.e. the higher the transmittance the stronger the antimicrobial action. Statistical analysis was performed (Kruskal-Wallis Test, p<0.05. RESULTS: The results, represented by the medians, were: G1 = 40; G2 = 100; G3 = 100; G4 = 90; G5 = 100; C1 = 40; C2 = 100. CONCLUSIONS: This in vitro study suggested that sodium hypochlorite-based substances and hydrogen peroxide are more efficient disinfectants against C. albicans than 2% chlorhexidine solution and the effervescent agent.

  7. Biocompatibility and other properties of acrylic bone cements prepared with antiseptic activators.

    Science.gov (United States)

    de la Torre, B; Fernández, M; Vázquez, B; Collía, F; de Pedro, J A; López-Bravo, A; San Román, J

    2003-08-15

    Acrylic bone cements prepared with activators of reduced toxicity have been formulated with the aim of improving the biocompatibility of the final material. The activators used were N,N-dimethylaminobenzyl alcohol (DMOH) and 4,4'-dimethylamino benzydrol (BZN). The toxicity, cytotoxicity, and antiseptic action of these activators were first studied. DMOH and BZN presented LD50 values 3-4 times higher than DMT, were less cytotoxic against polymorphonuclear leucocytes, and possessed an antimicrobial character, with a high activity against the most representative microorganisms involved in postoperative infections. The properties of the acrylic bone cements formulated with DMOH and BZN were evaluated to determine the influence of these activators on the curing process and the physicochemical characteristics of the cements. A decrease of the peak temperature was observed for the curing with DMOH or BZN with respect to that of one commercially available formulation (CMW 3). However, residual monomer content and mechanical properties in tension and compression were comparable to those of CMW 3. The biocompatibility of acrylic bone cements containing DMOH or BZN was studied and compared with CMW 3. To that end, intramuscular and intraosseous implantation procedures were carried out and the results were obtained from the histological analysis of the surrounding tissues at different periods of time. Implantation of rods of cement into the dorsal muscle of rats showed the presence of a membrane of connective tissue, which increased in collagen fibers with time of implantation, for all formulations. The intraosseous implantation of the cements in the dough state in the femur of rabbits, revealed a higher and early osseous neoformation, with the presence of osteoid material surrounding the rest of the cured material, for the cement prepared with the activator BZN in comparison with that obtained following the implantation of the cement cured with DMOH or DMT (CMW 3).

  8. Antibacterial activity of chitosan and the interpolyelectrolyte complexes of poly(acrylic acid-chitosan

    Directory of Open Access Journals (Sweden)

    Hortensia Ortega-Ortiz

    2010-06-01

    Full Text Available The antimicrobial activity of chitosan and water soluble interpolyelectrolyte complexes of poly(acrylic acid-chitosan was studied. Chitosans of two different molecular weights were tested at different concentration for 0.5 to 5 g·L-1 as antimicrobial agents against P. aeruginosa and P. oleovorans. In both cases, the best microbial inhibition was obtained with the concentration of 5 g·L-1. However, the interpolyelectrolyte complexes of poly(acrylic acid-chitosan with composition φ =2 produced higher antibacterial activity than the two chitosans at the concentration of 0.5 g·L-1. The NPEC2 complex was more effective than chitosans. This could be attributed to the number of moles of the amino groups of chitosan and the carboxylic acid groups of the interpolyelectrolyte complexes poly(acrylic acid.A atividade antimicrobiana de quitosana e complexos interpolieletrolíticos hidrossoluvéis de poli(ácido acrílico-quitosana foi estudada. Quitosanas de dois diferentes pesos moleculares foram testados em diferentes concentrações, 0,5 a 5 g • L-1, como agentes antimicrobianos nas P. aeruginosa e P. oleovorans. Em ambos os casos, obteu-se a melhor inibição microbiana com a concentração de 5 g • L-1, no entanto os complexos interpolieletrolíticos de poli (ácido acrílico-quitosana com composição φ = 2 apresentaram maior atividade antibacteriana do que os dois quitosans na concentração de 0,5 g • L-1. O complexo NPEC2 foi mais eficaz do que as quitosanas, sendo que o resultado pode ser atribuído ao número de moles dos grupos aminos da quitosana e aos grupos carboxílicos dos complexos de poli(ácido acrílico.

  9. Thermodynamic considerations of acrylic cement implant at the site of giant cell tumors of the bone.

    Science.gov (United States)

    Krishnan, E C; Nelson, C; Neff, J R

    1986-01-01

    A discussion of the thermodynamic aspects of a relatively new treatment method for giant cell tumors of the bone is presented in this paper. The advantages of implanting methylmethacrylate acrylic bone cement into a curetted tumor site are briefly discussed and placed in perspective relative to more prevalent surgical treatments. As the bone cement self-heats while curing, the possibility of heat necrosis in the bone exists. However, the damage due to heat may be beneficial in reducing the rate of tumor recurrence. A thermodynamic consideration of the treatment situation appears to be warranted. After a general introduction and a brief literature review, the theoretical thermodynamic equations are developed. Once the basic equations for the heat transfer from the cement or the bone are derived, there is then a discussion of the various characteristics of bone and methylmethacrylate crucial to the analysis, such as, thermal conductivity, specific heat, density, and heat generation parameters. Finally, in order to reduce the theory to a form which may be used practically, the equations derived are written in terms of finite-difference equations, which approximate them numerically. Different equations are written for each type of heat transfer condition encountered in the cement-bone system as spacial variances in material and geometry occur. The equations derived may be used to model the system allowing one to predict the time-dependent temperature distribution in bone during the curing of acrylic cement. Using computer techniques to reduce the equations obtained from this analysis, and knowing the temperature at which adjacent cells die, a zone of necrosis may be mapped surrounding the acrylic impact.

  10. Effect of an acrylic resin combined with an antimicrobial polymer on biofilm formation

    Directory of Open Access Journals (Sweden)

    Juliê Marra

    2012-12-01

    Full Text Available OBJECTIVES: The purpose of this study was to evaluate the antimicrobial activity of an acrylic resin combined with an antimicrobial polymer poly (2-tert-butylaminoethyl methacrylate (PTBAEMA to inhibit Staphylococcus aureus, Streptococcus mutans and Candida albicans biofilm formation. MATERIAL AND METHODS: Discs of a heat-polymerized acrylic resin were produced and divided according to PTBAEMA concentration: 0 (control, 10 and 25%. The specimens were inoculated (10(7 CFU/mL and incubated at 37ºC for 48 h. After incubation, the wells were washed and each specimen was sonicated for 20 min. Replicate aliquots of resultant suspensions were plated at dilutions at 37ºC for 48 h. The number of colony-forming units (CFU was counted and expressed as log (CFU+1/mL and analyzed statistically with α=.05. RESULTS: The results showed that 25% PTBAEMA completely inhibited S. aureus and S. mutans biofilm formation. A significant reduction of log (CFU+1/mL in count of S. aureus (control: 7.9±0.8A; 10%: 3.8±3.3B and S. mutans (control: 7.5±0.7A; 10%: 5.1±2.7B was observed for the group containing 10% PTBAEMA (Mann-Whitney, p0.05, P=0.079. CONCLUSIONS: Acrylic resin combined with 10 and 25% of PTBAEMA showed significant antimicrobial activity against S. aureus and S. mutans biofilm, but it was inactive against the C. albicans biofilm.

  11. Water Sorption and Flexural Strength of Thermoplastic and Conventional Heat-Polymerized Acrylic Resins

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Hemmati

    2016-01-01

    Full Text Available Objectives: The aim of this study was to assess and compare the water sorption and flexural strength of thermoplastic and conventional acrylic resins.Materials and Methods: Water sorption and flexural strength were compared between a thermoplastic modified polymethyl methacrylate (PMMA denture base resin (group A and a heat-polymerized PMMA acrylic resin (group B as the control group (n=10. A three-point bending test was carried out for flexural strength testing. For water sorption test, 10 disc-shaped samples were prepared. After desiccating, the samples were weighed and immersed in distilled water for seven days. Then, they were weighed again, and desiccated for the second and third times. Differences between the mean values in the two groups were analyzed using Student's t-test.Results: The mean value of water sorption was 14.74±1.36 μg/mm3 in group A, and 19.11±0.90 μg/mm3 in group B; this difference was statistically significant (P< 0.001. The mean value of flexural strength was 88.21±8.63 MPa in group A and 77.77±9.49 MPa in group B. A significant difference was observed between the two groups (P= 0.019.Conclusion: Flexural strength of group A was significantly higher than that of group B, and its water sorption was significantly lower. Thus, thermoplastic resins can be a suitable alternative to conventional PMMA acrylic resins as denture base materials.

  12. Minocycline-loaded cellulose nano whiskers/poly(sodium acrylate) composite hydrogel films as wound dressing.

    Science.gov (United States)

    Bajpai, S K; Pathak, V; Soni, Bhawna

    2015-08-01

    In this work, antibiotic drug Minocycline (Mic) loaded cellulose nano-whiskers (CNWs)/poly(sodium acrylate) hydrogel films were prepared and investigated for their drug releasing capacity in physiological buffer solution (PBS) at 37 °C. The (CNWs)/poly(sodium acrylate) film, containing 9.7% (w/w) of CNWs, demonstrated Mic release of 2500 μg/g while the plain poly(acrylate) film showed 3100 μg/g of drug release. In addition, with the increase in the concentration of cross-linker N,N'-methylene bisacrylamide (MB) from to, the drug release from the resulting films decreased from 507 to 191 μg/g. The release exponent 'n' for films with different compositions was found in the range of 0.45 to 0.89, thus indicating non-Fickian release mechanism. The Schott model was employed to interpret the kinetic drug release data successfully. The film samples poly(SA) and CNWs/poly(SA) (both not containing drug) showed thrombus formation of 0.010±0.001 g and 0.007±0.001 g, respectively, thus showing the non-thrombogenic behavior. In percent Hemolysis, both of the film samples of 1.136±0.012 and 0.5±0.020, respectively, thus indicating non-hemolytic behavior. In addition, both of the film samples demonstrated protein adsorption of 49.02±0.59μ g/μL and 51.20±0.51 μg/μL per cm(2), thus revealing a fair degree of protein adsorption. Finally, the Mic-loaded films showed fair anti-fungal and antibacterial properties.

  13. An Electrochemical DNA Microbiosensor Based on Succinimide-Modified Acrylic Microspheres

    Directory of Open Access Journals (Sweden)

    Sharina Abu Hanifah

    2012-04-01

    Full Text Available An electrochemical microbiosensor for DNA has been fabricated based on new acrylic microspheres modified with reactive N-acryloxysuccinimide (NAS functional groups. Hydrophobic poly(n-butylacrylate-N-acryloxysuccinimide microspheres were synthesized in an emulsion form with a simple one-step photopolymerization technique. Aminated DNA probe was attached to the succinimde functional group of the acrylic microspheres via covalent bonding. The hybridization of the immobilized DNA probe with the complementary DNA was studied by differential pulse voltametry using anthraquninone-2-sulfonic acid monohydrate sodium salt (AQMS as the electroactive hybridization label. The influences of many factors such as duration of DNA probe immobilization and hybridization, pH, type of ions, buffer concentrations, ionic strength, operational temperature and non-complementary DNA on the biosensor performance were evaluated. Under optimized conditions, the DNA microbiosensor demonstrated a linear response range to target DNA over a wide concentration range of 1.0 × 10−16 and 1.0 ´ 10−8 M with a lower limit of detection (LOD of 9.46 ´ 10−17 M (R2 = 0.97. This DNA microbiosensor showed good reproducibility with 2.84% RSD (relative standard deviation (n = 3. Application of the NAS-modified acrylic microspheres in the construction of DNA microbiosensor had improved the overall analytical performance of the resultant DNA microbiosensor when compared with other reported DNA biosensors using other nano-materials for membranes and microspheres as DNA immobilization matrices.

  14. Polishing of denture base acrylic resin with chairside polishing kits: an SEM and surface roughness study.

    Science.gov (United States)

    Chatzivasileiou, Konstantinos; Emmanouil, Ioannis; Kotsiomiti, Eleni; Pissiotis, Argirios

    2013-01-01

    Heat-cured acrylic resin specimens were polished using either conventional laboratory polishing, sandpaper, or three commercial chairside kits. The surface roughness of the polished specimens was measured with a contact profilometer. Scanning electron microscopy was used to obtain microphotographs of the polished surfaces. Laboratory polishing produced the smoothest surfaces in all cases, while sandpaper application produced the roughest. Use of the chairside polishing kits resulted in significantly rougher surfaces compared to those produced by laboratory polishing. Nonetheless, polishing of trimmed denture bases using chairside polishing kits is an effective alternative procedure for cases in which the laboratory procedure is not applicable.

  15. Preparation and Characterization of Ester from Rosin Acrylic Acid Adduct and Hydroxyethyl Methacrylate

    Institute of Scientific and Technical Information of China (English)

    C.L.Yu; F.A.Zhang

    2007-01-01

    1 Results Rosin is a sort of important renewable resources,which is a foremost product of our country forestry. It has very important meaning to modify the rosin based on its molecule structure and active group, to develop some deep processing products, and to endure with rosin new characteristic[1]. This work uses the rosin and acrylic acid to form rosin adduct, and then reacted with 2-hydroxyethyl methacrylate (HEMA) to form ester under the different condition. The effect of different ratios with the ...

  16. Ocean Engineering Studies Compiled 1991. Volume 6. Acrylic Windows - Typical Applications in Pressure Housings

    Science.gov (United States)

    1991-01-01

    Nostrand Inc., Princeton, New Jersey, March 1956. 20. Southwest Research Institute, Final Repo .’t SWRI 034090-001, "Finite Element Anlalysis of an... REPO " T .. OI3t ,Any other nun,,.,. that troy be Cl ~re d.1 IC’ D-vRflUJTiON STATEMENT Distribution of this document is unlimited. Naval Undersea...No. 4, 1971. 6. Maison , J. R., and Stachiw, J. D., "Acrylic Pressure Hull for Johnson-Sea-Link Sub- mersible," ASME Paper No. 71-WA/Unt-6. 7. Wilson, E

  17. Structure and properties of poly(benzyl acrylate) synthesized under microwave energy

    Energy Technology Data Exchange (ETDEWEB)

    Oberti, Tamara G. [Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA), Facultad de Ciencias Exactas, Universidad Nacional de La Plata-CONICET Casilla de Correo 16, Sucursal 4, 1900 La Plata (Argentina); Laboratorio de Estudio de Compuestos Organicos (LADECOR), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 1900 La Plata (Argentina); Schiavoni, M. Mercedes [Laboratorio de Estudio de Compuestos Organicos (LADECOR), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 1900 La Plata (Argentina); Cortizo, M. Susana [Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA), Facultad de Ciencias Exactas, Universidad Nacional de La Plata-CONICET Casilla de Correo 16, Sucursal 4, 1900 La Plata (Argentina)], E-mail: gcortizo@inifta.unlp.edu.ar

    2008-05-15

    Benzyl acrylate was polymerized under microwave irradiation using radical initiation (benzoyl peroxide, BP). The effect of the concentration of BP and power irradiation on the conversion, average molecular weights and the polydispersity index (M{sub w}/M{sub n}) were investigated. The {sup 1}H NMR and {sup 13}C NMR spectra analysis showed tendency to syndiotacticity and branched polymers were obtained at high conversion of reactions. A significant enhancement of the rates of polymerization and similar thermodynamic behavior, as compared with those obtained under thermal conditions was found.

  18. Properties of Low Surface Energy Fluorocarbon Polymers with Fluoro-acrylic Resins

    Institute of Scientific and Technical Information of China (English)

    LIU Xiusheng; WANG Can; LIU Lanxuan; LI Jian; GAO Wanzhen

    2008-01-01

    The low surface energy fluorocarbon polymer from the synthesized fluoro-acrylic resins was developed. Then the molecule orientation principle of nonpolar and polar functional groups in the polymers was analyzed. And the contact angles of pure water drops on the surfaces of various fluoro-monomer homopolymers and interpolymers were measured. So the relation of polymers' fluoro-content with the surface energy was determined. The distribution of fluoric functional groups in the polymers was investigated. And the test results show that though the total fluorine content of the fluorocarbon polymers is relative few, their surface energy is really low due to the enrichment of fluoro-chains on the polymers surface.

  19. Radiation-induced graft polymerization of acrylamide and acrylic acid onto polyethylene

    Science.gov (United States)

    Grushevskaya, L. N.; Aliev, R. E.; Kabanov, V. Ya.

    The radiation-induced grafting of acrylamide onto low-density polyethylene by the different methods and under different conditions was investigated: by the direct liquid phase method from this monomer solution in water (in neutral and acid media) and acetone, and by the pre-irradiation method from aqueous solutions as well as from its sublimated vapour. The molecular masses of polyacrylamide homopolymers were determined. The discussion and comparison of different methods of acrylamide grafting are performed. The relationship between rates of graft polymerization onto polyethylene and homopolymerization of acrylic acid in the presence of metal ions is considered.

  20. Synthesis of carboxymethylcellulose/acrylic acid hydrogels with superabsorbent properties by radiation-initiated crosslinking

    Science.gov (United States)

    Fekete, Tamás; Borsa, Judit; Takács, Erzsébet; Wojnárovits, László

    2016-07-01

    Superabsorbent hydrogels were prepared by gamma irradiation from aqueous solutions of carboxymethylcellulose (CMC) and acrylic acid (AAc) with varying CMC:AAc ratio. By partially replacing the CMC with AAc the gelation increased and led to a higher gel fraction and lower water uptake. Moreover, the gelation required significantly milder synthesis conditions. Decreasing both the dose and the solute concentration in the presence of AAc led to gels with higher gel fraction and higher degree of swelling compared to pure CMC gels. Increasing the AAc content up to 10% proved to be very effective, while very high AAc content (over 50%) hindered the gelation process.