WorldWideScience

Sample records for floating potential probe

  1. On Floating Potential of Emissive Probes in a Partially-Magnetized Plasma

    Science.gov (United States)

    Raitses, Yevgeny; Kraus, Brian

    2016-10-01

    We compare measurements of plasma potential in a cross-field Penning discharge from two probes: swept biased Langmuir probe and floating emissive probe. The plasma potential was deduced from the first derivative of the Langmuir probe characteristic. In previous studies, the emissive and swept biased probes were placed at the channel exit of a Hall thruster (HT). Measurements showed that the emissive probe floats below the plasma potential, in agreement with conventional theories. However, recent measurements in the Penning discharge indicate a floating potential of a strongly-emitting hot probe above the plasma potential. In both probe applications, xenon plasmas have magnetized electrons and non-magnetized ions with similar plasma densities (1010 - 1011 cm-3) . Though their electron temperatures differ by an order of magnitude (Penning 5 eV, HT 50 eV), this difference cannot explain the difference in measurement values of the hot floating potential because both temperatures are much higher than the emitting wire. In this work, we investigate how the ion velocity and other plasma parameters affect this discrepancy between probe measurements of the plasma potential. This work was supported by DOE contract DE-AC02-09CH11466.

  2. A comparison of inflection point and floating point emissive probe techniques for electric potential measurements in a Hall thruster plasma

    Science.gov (United States)

    Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah; Fisch, Nathaniel

    2010-11-01

    Theory suggests that when increasing the electron emission of an emissive probe the floating potential will saturate ˜Te/e below the plasma potential. This can introduce significant errors in plasma potential measurements in Hall thrusters where Te> 10 eV. The method of determining the plasma potential from the inflection point of emissive IV traces in the limit of zero emission may give a more accurate measurement of the plasma potential. The two methods are compared in a Hall thruster where ne˜10^11 cm-3, Te˜20 eV, and ion flows are significant. The results can be generalized to other types of plasmas.

  3. The theory of Langmuir probes in strong electrostatic potential structures

    Science.gov (United States)

    Borovsky, J. E.

    1986-01-01

    The operation of collecting and emitting Langmuir probes and double probes within time-stationary strong electrostatic potential structures is analyzed. The cross sections of spherical and cylindrical probes to charged particles within the structures are presented and used to obtain the current-voltage characteristics of idealized probes. The acquisition of plasma parameters from these characteristics is outlined, and the operation of idealized floating double-probe systems is analyzed. Probe surface effects are added to the idealized theory, and some surface effects pertinent to spacecraft probes are quantified. Magnetic field effects on idealized probes are examined, and the time required for floating probes to change their potentials by collecting charge and by emitting photoelectrons is discussed. Calculations on the space-charge effects of probe-perturbed beams and on the space-charge limiting of electron emission are given in an appendix.

  4. Measurement of sheath thickness at a floating potential

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hyung-Sik; Lee, Hyo-Chang; Oh, Se-Jin; Chung, Chin-Wook, E-mail: joykang@hanyang.ac.kr [Department of Electrical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of)

    2014-02-15

    In a cylindrical Langmuir probe measurement, ion current is collected from the surface of the sheath surrounded at probe tip, not at the surface of the probe tip. By using this, the sheath thickness can be obtained, if we know some unknown parameters, such as ion current, plasma density, and electron temperature. In this paper, we present a method to measure sheath thickness by using a wave cutoff method and a floating harmonic method. The measured result is in a good agreement with Allen-Boyd-Reynolds theory.

  5. Direct probing of electron and hole trapping into nano-floating-gate in organic field-effect transistor nonvolatile memories

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Ze-Qun; Wang, Shun; Chen, Jian-Mei; Gao, Xu; Dong, Bin, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn; Chi, Li-Feng, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn; Wang, Sui-Dong, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn [Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, Jiangsu 215123 (China)

    2015-03-23

    Electron and hole trapping into the nano-floating-gate of a pentacene-based organic field-effect transistor nonvolatile memory is directly probed by Kelvin probe force microscopy. The probing is straightforward and non-destructive. The measured surface potential change can quantitatively profile the charge trapping, and the surface characterization results are in good accord with the corresponding device behavior. Both electrons and holes can be trapped into the nano-floating-gate, with a preference of electron trapping than hole trapping. The trapped charge quantity has an approximately linear relation with the programming/erasing gate bias, indicating that the charge trapping in the device is a field-controlled process.

  6. A Method for Measuring Fast Time Evolutions of the Plasma Potential by Means of a Simple Emissive Probe

    DEFF Research Database (Denmark)

    Iizuka, S.; Michelsen, Poul; Juul Rasmussen, Jens;

    1981-01-01

    A method is presented for obtaining the temporal evolution of the plasma potential, which is assumed to be given by the floating potential of a simple emissive probe. The construction of the probe is also described. The method avoids the slow time response of the usual technique where the floating...... potential is measured across a high resistance. During each sweep of the probe voltage, the changing of the sign of the probe current, which is sampled at a specific time, gives rise to a negative pulse, driving the pen-lift of an X-Y recorder. Since the real floating potential is measured where the probe...

  7. DESIGN OF THE CONTACT POTENTIALS DIFFERENCE PROBES

    Directory of Open Access Journals (Sweden)

    K. U. Pantsialeyeu

    2016-01-01

    Full Text Available The contact potential difference probes distinguished by great variety and produced mostly in the laboratory for specific experimental applications. As a rule, they consist of commercially available instrumentation, and have a number of disadvantages: large dimensions, complexity and high cost, small sensitivity, operating speed, noiseproof, etc. The purpose of this paper is to describe the basic approaches to design of the small dimension, complete contact potential difference probes, providing high sensitivity, operating speed, and noise immunity. In this paper the contact potential difference probe, which is a electrometer with dynamic capacitor plate at about 0.1–5 mm2 . These probes are could be used in scanning systems, such as a Scanning Kelvin Probe, as well as for controlling system of manufacturing processes, e.g. under friction. The design of such contact potential difference probes conducted using modern electronic components, unique circuitry and design solutions described in detail at paper. The electromechanical modulator applied for mechanical vibrations of the reference sample. To provide a high amplitude and phase stability the upgraded generator with Wien bridge was used instead traditional oscillation sensor. The preamplifier made on the base of modern operational amplifiers with femtoampere current input. The power of the preamplifier designed with «floating ground». It allows keeping the relation constant potential to the probe components when changing over a wide range the compensation voltage. The phase detector-integrator based on the electronic antiphase switches with the modulation frequency of the contact potential difference and the integrator. Fullwave phase detection would greatly increase the sensitivity of the probe. In addition, the application of the phase detection allows suppressing noise and crosstalk at frequencies different from the modulation frequency. The preamplifier and the reference sample

  8. Potential of water surface-floating microalgae for biodiesel production: Floating-biomass and lipid productivities.

    Science.gov (United States)

    Muto, Masaki; Nojima, Daisuke; Yue, Liang; Kanehara, Hideyuki; Naruse, Hideaki; Ujiro, Asuka; Yoshino, Tomoko; Matsunaga, Tadashi; Tanaka, Tsuyoshi

    2017-03-01

    Microalgae have been accepted as a promising feedstock for biodiesel production owing to their capability of converting solar energy into lipids through photosynthesis. However, the high capital and operating costs, and high energy consumption, are hampering commercialization of microalgal biodiesel. In this study, the surface-floating microalga, strain AVFF007 (tentatively identified as Botryosphaerella sudetica), which naturally forms a biofilm on surfaces, was characterized for use in biodiesel production. The biofilm could be conveniently harvested from the surface of the water by adsorbing onto a polyethylene film. The lipid productivity of strain AVFF007 was 46.3 mg/L/day, allowing direct comparison to lipid productivities of other microalgal species. The moisture content of the surface-floating biomass was 86.0 ± 1.2%, which was much lower than that of the biomass harvested using centrifugation. These results reveal the potential of this surface-floating microalgal species as a biodiesel producer, employing a novel biomass harvesting and dewatering strategy.

  9. Classifying Floating Potential Measurement Unit Data Products as Science Data

    Science.gov (United States)

    Coffey, Victoria; Minow, Joseph

    2015-01-01

    We are Co-Investigators for the Floating Potential Measurement Unit (FPMU) on the International Space Station (ISS) and members of the FPMU operations and data analysis team. We are providing this memo for the purpose of classifying raw and processed FPMU data products and ancillary data as NASA science data with unrestricted, public availability in order to best support science uses of the data.

  10. RP and RQA Analysis for Floating Potential Fluctuations in a DC Magnetron Sputtering Plasma

    Science.gov (United States)

    Sabavath, Gopikishan; Banerjee, I.; Mahapatra, S. K.

    2016-04-01

    The nonlinear dynamics of a direct current magnetron sputtering plasma is visualized using recurrence plot (RP) technique. RP comprises the recurrence quantification analysis (RQA) which is an efficient method to observe critical regime transitions in dynamics. Further, RQA provides insight information about the system’s behavior. We observed the floating potential fluctuations of the plasma as a function of discharge voltage by using Langmuir probe. The system exhibits quasi-periodic-chaotic-quasi-periodic-chaotic transitions. These transitions are quantified from determinism, Lmax, and entropy of RQA. Statistical investigations like kurtosis and skewness also studied for these transitions which are in well agreement with RQA results.

  11. Floating potential of large dust grains with electron emission

    Energy Technology Data Exchange (ETDEWEB)

    Bacharis, M., E-mail: minas.bacharis03@imperial.ac.uk [Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BW (United Kingdom)

    2014-07-15

    Electron emission from the surface of solid particles plays an important role in many dusty plasma phenomena and applications. Examples of such cases include fusion plasmas and dusty plasma systems in our solar system. Electron emission complicates the physics of the plasma-dust interaction. One of the most important aspects of the physics of the dust plasma interaction is the calculation of the particle's floating potential. This is the potential a dust particle acquires when it is in contact with a plasma and it plays a very important role for determining its dynamical behaviour. The orbital motion limited (OML) approach is used in most cases in the literature to model the dust charging physics. However, this approach has severe limitations when the size of the particles is larger than the electron Debye length λ{sub De}. Addressing this shortcoming for cases without electron emission, a modified version of OML (MOML) was developed for modelling the charging physics of dust grains larger than the electron Debye length. In this work, we will focus on extending MOML in cases where the particles emit electrons. Furthermore, a general method for calculating the floating potential of dust particles with electron emission will be presented for a range of grain sizes.

  12. Sensitive Probe for Symmetry Potential

    Institute of Scientific and Technical Information of China (English)

    LIU Jian-Ye; XIAO Guo-Qing; GUO Wen-Jun; REN ZhongZhou; ZUO Wei; LEE Xi-Guo

    2007-01-01

    Based on both very obvious isospin effect of the neutron-proton number ratio of nucleon emissions (n/p)nucl on symmetry potential and (n/p)nucl's sensitive dependence on symmetry potential in the nuclear reactions induced by halo-neutron projectiles, compared to the same mass stable projectile, probing symmetry potential is investigated within the isospin-dependent quantum molecular dynamics with isospin and momentum-dependent interactions for different symmetry potentials U1sym and U2sym. It is found that the neutron-halo projectile induces very obvious increase of (n/p)nucl and strengthens the dependence of (n/p)nucl on the symmetry potential for all the beam energies and impact parameters, compared to the same mass stable projectile under the same incident channel condition. Therefore (n/p)nucl induced by the neutron-halo projectile is a more favourable probe than the normal neutron-rich and neutron-poor projectiles for extracting the symmetry potential.

  13. Magnetically insulated baffled probe for real-time monitoring of equilibrium and fluctuating values of space potentials, electron and ion temperatures, and densities.

    Science.gov (United States)

    Demidov, V I; Koepke, M E; Raitses, Y

    2010-10-01

    By restricting the electron-collection area of a cold Langmuir probe compared to the ion-collection area, the probe floating potential can become equal to the space potential, and thus conveniently monitored, rather than to a value shifted from the space potential by an electron-temperature-dependent offset, i.e., the case with an equal-collection-area probe. This design goal is achieved by combining an ambient magnetic field in the plasma with baffles, or shields, on the probe, resulting in species-selective magnetic insulation of the probe collection area. This permits the elimination of electron current to the probe by further adjustment of magnetic insulation which results in an ion-temperature-dependent offset when the probe is electrically floating. Subtracting the floating potential of two magnetically insulated baffled probes, each with a different degree of magnetic insulation, enables the electron or ion temperature to be measured in real time.

  14. Influence of the floating potential on micro-hollow cathode operation

    Energy Technology Data Exchange (ETDEWEB)

    Levko, D. [Department of Aerospace Engineering and Engineering Mechanics, The University of Texas at Austin, Austin, Texas 78712 (United States); Bliokh, Y. P.; Krasik, Ya. E. [Department of Physics, Technion, 32000 Haifa (Israel)

    2015-06-15

    The influence of a keeper electrode with a floating potential on the operation of a micro-hollow cathode is studied using the two-dimensional particle-in-cell Monte Carlo collisions model. The floating potential is determined self-consistently, taking into account the electron and ion charges collected by the keeper and the potential induced by the plasma non-compensated space charge. It is shown that the parameters of the micro-hollow cathode operation vary significantly, according to whether the keeper potential is floating or has a specified constant value.

  15. Fabrication and Microassembly of a mm-Sized Floating Probe for a Distributed Wireless Neural Interface

    Directory of Open Access Journals (Sweden)

    Pyungwoo Yeon

    2016-09-01

    Full Text Available A new class of wireless neural interfaces is under development in the form of tens to hundreds of mm-sized untethered implants, distributed across the target brain region(s. Unlike traditional interfaces that are tethered to a centralized control unit and suffer from micromotions that may damage the surrounding neural tissue, the new free-floating wireless implantable neural recording (FF-WINeR probes will be stand-alone, directly communicating with an external interrogator. Towards development of the FF-WINeR, in this paper we describe the micromachining, microassembly, and hermetic packaging of 1-mm3 passive probes, each of which consists of a thinned micromachined silicon die with a centered Ø(diameter 130 μm through-hole, an Ø81 μm sharpened tungsten electrode, a 7-turn gold wire-wound coil wrapped around the die, two 0201 surface mount capacitors on the die, and parylene-C/Polydimethylsiloxane (PDMS coating. The fabricated passive probe is tested under a 3-coil inductive link to evaluate power transfer efficiency (PTE and power delivered to a load (PDL for feasibility assessment. The minimum PTE/PDL at 137 MHz were 0.76%/240 μW and 0.6%/191 μW in the air and lamb head medium, respectively, with coil separation of 2.8 cm and 9 kΩ receiver (Rx loading. Six hermetically sealed probes went through wireless hermeticity testing, using a 2-coil inductive link under accelerated lifetime testing condition of 85 °C, 1 atm, and 100%RH. The mean-time-to-failure (MTTF of the probes at 37 °C is extrapolated to be 28.7 years, which is over their lifetime.

  16. Floating nuclear power plants: potential implications for radioactive pollution of the northern marine environment.

    Science.gov (United States)

    Standring, W J F; Dowdall, M; Amundsen, I; Strand, P

    2009-02-01

    Recent media reports as to the development, construction and possible deployment of floating nuclear power plants in the northern regions has generated significant interest in the matter. This paper presents background to the concept of floating nuclear power plants, information as to possible designs and iterations and some aspects of potential concern with respect to safety and the potential for environmental or other impacts as a result of the development and use of such systems in the northern regions.

  17. Investigation of multifractal nature of floating potential fluctuations obtained from a dc glow discharge magnetized plasma

    Science.gov (United States)

    Shaw, Pankaj Kumar; Saha, Debajyoti; Ghosh, Sabuj; Janaki, M. S.; Iyengar, A. N. Sekar

    2017-03-01

    In this paper, multifractal detrended fluctuation analysis (MF-DFA) has been used to analyze the floating potential fluctuations obtained with a Langmuir probe from a dc glow discharge magnetized plasma device. The generalized Hurst exponents (h(q)) , local fluctuation function (Fq(s)) , the Rényi exponents (τ(q)) and the multifractal spectrum F(α) have been calculated by applying the MF-DFA method. The result of the MF-DFA shows the multifractal nature of these fluctuations. We have investigated the influence of magnetic field on the multifractal nature of the fluctuations and it is seen that degree of multifractality is reduced with the increase in the magnetic field strength. The values of h(q) have been restricted between 0.7 and 1 for the magnetized fluctuations. This result is evidence of the existence of long-range correlations in the fluctuations. Furthermore, we employed shuffle and surrogate approaches to analyze the origins of multifractality. Comparing the MF-DFA results for the data set to those for shuffled and surrogate series, we have found that its multifractal nature is due to the existence of significant long-term correlation.

  18. 77 FR 16116 - Public Input on the Development and Potential Issuance of Treasury Floating Rate Notes

    Science.gov (United States)

    2012-03-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE TREASURY Public Input on the Development and Potential Issuance of Treasury Floating Rate Notes AGENCY: Office of the Assistant Secretary for Financial Markets, Treasury. ACTION: Notice and request for...

  19. Nonlinear circuit analysis of harmonic currents in a floating Langmuir probe with a capacitive load

    Science.gov (United States)

    Kim, Kyung-Hyun; Kim, Dong-Hwan; Chung, Chin-Wook

    2017-02-01

    Plasma diagnostics using the floating harmonic technique were first used to obtain the electron temperature in a tokamak plasma. In this technique, the electron temperature depends on the ratio of the harmonic currents in a resistive sheath. Because these harmonic currents are determined by a modulated sheath voltage, calculation of the exact modulated voltage across the sheath is important; in general, the voltage is calculated using a phase of the first harmonic current. However, when a series load capacitance is present, the second harmonic currents are abnormally reduced compared to those expected by the conventional floating harmonic model, resulting in an unreliable measurement of the electron temperature. To describe this phenomenon, we used a modified floating harmonic model by applying the harmonic balance technique, a method that analyzes nonlinear circuits. Theoretical prediction of the harmonic current obtained from the modified model was compared with the experimental results, and they are in good agreement. In addition, the degrees of sheath nonlinearity, defined as the ratio of the second harmonic current (or voltage) to the fundamental current (or voltage), are discussed.

  20. Floating Offshore Wind in Hawaii: Potential for Jobs and Economic Impacts from Three Future Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Tony; Keyser, David; Tegen, Suzanne

    2016-04-18

    Construction of the first offshore wind power plant in the United States began in 2015, off the coast of Rhode Island, using fixed platform structures that are appropriate for shallow seafloors, like those located off the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to be anchored to the deeper seafloor if deployed in Hawaiian waters. To analyze the employment and economic potential for floating offshore wind off Hawaii's coasts, the Bureau of Ocean Energy Management commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical deployment scenarios for Hawaii: 400 MW of offshore wind by 2050 and 800 MW of offshore wind by 2050. The results of this analysis can be used to better understand the general scale of economic opportunities that could result from offshore wind development.

  1. Floating Offshore Wind in Oregon: Potential for Jobs and Economic Impacts from Two Future Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Speer, Bethany [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    Construction of the first offshore wind power plant in the United States began in 2015, off the coast of Rhode Island, using fixed platform structures that are appropriate for shallow seafloors, like those located off of the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to anchor to the deeper seafloor if deployed off of the West Coast. To analyze the employment and economic potential for floating offshore wind along the West Coast, the Bureau of Ocean Energy Management (BOEM) commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical, large-scale deployment scenarios for Oregon: 5,500 megawatts (MW) of offshore wind deployment in Oregon by 2050 (Scenario A), and 2,900 MW of offshore wind by 2050 (Scenario B). These levels of deployment could power approximately 1,600,000 homes (Scenario A) or 870,000 homes (Scenario B). Offshore wind would contribute to economic development in Oregon in the near future, and more substantially in the long term, especially if equipment and labor are sourced from within the state. According to the analysis, over the 2020-2050 period, Oregon floating offshore wind facilities could support 65,000-97,000 job-years and add $6.8 billion-$9.9 billion to the state GDP (Scenario A).

  2. Microlens Terrestrial Parallax Mass Measurements: A Rare Probe of Isolated Brown Dwarfs and Free-Floating Planets

    CERN Document Server

    Gould, Andrew

    2012-01-01

    Terrestrial microlens parallax is one of the very few methods that can measure the mass and number density of isolated dark low-mass objects, such as old free-floating planets and brown dwarfs. Terrestrial microlens parallax can be measured whenever a microlensing event differs substantially as observed from two or more well-separated sites. If the lens also transits the source during the event, then its mass can be measured. We derive an analytic expression for the expected rate of such events and then use this to derive two important conclusions. First the rate is directly proportional to the number density of a given population, greatly favoring low-mass populations relative to their contribution to the general microlensing rate, which further scales as sqrt{M} where M is the lens mass. Second, the rate rises sharply as one probes smaller source stars, despite the fact that the probability of transit falls directly with source size. We propose modifications to current observing strategies that could yield ...

  3. Floating Offshore Wind in California: Gross Potential for Jobs and Economic Impacts from Two Future Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Speer, Bethany [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-04-18

    Construction of the first offshore wind farm in the United States began in 2015, using fixed platform structures that are appropriate for shallow seafloors, like those located off of the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to anchor to the deeper seafloor if deployed off of the West Coast. To analyze the employment and economic potential for floating offshore wind along the West Coast, the Bureau of Ocean Energy Management (BOEM) has commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical, large-scale deployment scenarios for California: 16 GW of offshore wind by 2050 (Scenario A) and 10 GW of offshore wind by 2050 (Scenario B). The results of this analysis can be used to better understand the general scales of economic opportunities that could result from offshore wind development. Results show total state gross domestic product (GDP) impacts of $16.2 billion in Scenario B or $39.7 billion in Scenario A for construction; and $3.5 billion in Scenario B or $7.9 billion in Scenario A for the operations phases.

  4. Non-toxic fluorescent phosphonium probes to detect mitochondrial potential

    Science.gov (United States)

    Šarić, Ana; Crnolatac, Ivo; Bouillaud, Frédéric; Sobočanec, Sandra; Mikecin, Ana-Matea; Mačak Šafranko, Željka; Delgeorgiev, Todor; Piantanida, Ivo; Balog, Tihomir; Petit, Patrice X.

    2017-03-01

    We evaluated our phosphonium-based fluorescent probes for selective staining of mitochondria. Currently used probes for monitoring mitochondrial membrane potential show varying degrees of interference with cell metabolism, photo-induced damage and probe binding. Here presented probes are characterised by highly efficient cellular uptake and specific accumulation in mitochondria. Fluorescent detection of the probes was accomplished using flow cytometry and confocal microscopy imaging of yeast and mammalian cells. Toxicity analysis (impedimetry—xCELLigence for the cellular proliferation and Seahorse technology for respiratory properties) confirms that these dyes exhibit no-toxicity on mitochondrial or cellular functioning even for long time incubation. The excellent chemical and photophysical stability of the dyes makes them promising leads toward improved fluorescent probes. Therefore, the probes described here offer to circumvent the problems associated with existing-probe’s limitations.

  5. Investigating the potential of floating mires as record of palaeoenvironmental changes

    Science.gov (United States)

    Zaccone, C.; Adamo, P.; Giordano, S.; Miano, T. M.

    2012-04-01

    Peat-forming floating mires could provide an exceptional resource for palaeoenvironmental and environmental monitoring studies, as much of their own history, as well as the history of their surrounds, is recorded in their peat deposits. In his Naturalis historia (AD 77-79), Pliny the Elder described floating islands on Lake Vadimonis (now Posta Fibreno Lake, Italy). Actually, a small floating island (ca. 35 m of diameter and 3 m of submerged thickness) still occurs on this calcareous lake fed by karstic springs at the base of the Apennine Mountains. Here the southernmost Italian populations of Sphagnum palustre occur on the small surface of this floating mire known as "La Rota", i.e., a cup-formed core of Sphagnum peat and rhizomes of Helophytes, erratically floating on the water-body of a submerged doline, annexed to the easternmost edge of the lake, characterised by the extension of a large reed bed. Geological evidence point out the existence in the area of a large lacustrine basin since Late Pleistocene. The progressive filling of the lake caused by changing in climatic conditions and neotectonic events, brought about the formation of peat deposits in the area, following different depositional cycles in a swampy environment. Then, a round-shaped portion of fen, originated around lake margins in waterlogged areas, was somehow isolated from the bank and started to float. Coupling data about concentrations and fluxes of several major and trace elements of different origin (i.e., dust particles, volcanic emissions, cosmogenic dusts and marine aerosols), with climate records (plant micro- and macrofossils, pollens, isotopic ratios), biomolecular records (e.g., lipids), detailed age-depth modelling (i.e., 210Pb, 137Cs, 14C), and humification indexes, the present work is hoped to identify and better understand the reliability of this particular "archive", and thus possible relationships between biogeochemical processes occurring in this floating bog and environmental

  6. A modified potential probe for induction charging risk assessment

    Science.gov (United States)

    Fast, Lars; Paasi, Jaakko

    2008-12-01

    Practical assessment of risks for Electrostatic Discharge (ESD) failures of semiconductor devices, due to charges induced on devices in a manufacturing or repair environment of electronics has been difficult, because easily measurable parameters such as the electrostatic field and the potential of a charged surface do not directly quantify the risk. In this paper a new method of assessing the risks with induction charging of a sensitive device is presented by introducing a well-defined dummy device, which is a simple modification of the probe of DC type non-contacting electrostatic voltmeter. By placing the modified potential probe (mimicking large sensitive device) in front of charged surface, risks of ESD failure for a device due to induction charging can be assessed. The electrostatic response of the probe at different distances between charged surface and the probe has been verified by numerical model calculations.

  7. Plasma Potential and Langmuir Probe Measurements in the Near-field Plume of the NASA 300M Hall Thruster

    Science.gov (United States)

    Herman, Daniel A; Shastry, Rohit; Huang, Wensheng; Soulas, George C.; KamHawi, Hani

    2012-01-01

    In order to aid in the design of high-power Hall thrusters and provide experimental validation for existing modeling efforts, plasma potential and Langmuir probe measurements were performed in the near-field plume of the NASA 300M Hall thruster. A probe array consisting of a Faraday probe, Langmuir probe, and emissive probe was used to interrogate the plume from approximately 0.1 - 2.0 DT,m downstream of the thruster exit plane at four operating conditions: 300 V, 400 V, and 500 V at 20 kW as well as 300 V at 10 kW. Results show that the acceleration zone and high-temperature region were contained within 0.3 DT,m from the exit plane at all operating conditions. Isothermal lines were shown to strongly follow magnetic field lines in the nearfield, with maximum temperatures ranging from 19 - 27 eV. The electron temperature spatial distribution created large drops in measured floating potentials in front of the magnetic pole surfaces where the plasma density was small, which suggests strong sheaths at these surfaces. The data taken have provided valuable information for future design and modeling validation, and complements ongoing internal measurement efforts on the NASA 300 M.

  8. Plasma Potential and Langmuir Probe Measurements in the Near-field Plume of the NASA-300M Hall Thruster

    Science.gov (United States)

    Herman, Daniel A.; Shastry, Rohit; Huang, Wensheng; Soulas, George C.; Kamhawi, Hani

    2012-01-01

    In order to aid in the design of high-power Hall thrusters and provide experimental validation for existing modeling efforts, plasma potential and Langmuir probe measurements were performed in the near-field plume of the NASA-300M Hall thruster. A probe array consisting of a Faraday probe, Langmuir probe, and emissive probe was used to interrogate the plume from approximately 0.1 - 2.0 mean thruster diameters downstream of the thruster exit plane at four operating conditions: 300 V, 400 V, and 500 V at 20 kW as well as 300 V at 10 kW. Results show that the acceleration zone and high-temperature region were contained within 0.3 mean thruster diameters from the exit plane at all operating conditions. Isothermal lines were shown to strongly follow magnetic field lines in the near-field, with maximum temperatures ranging from 19 - 27 eV. The electron temperature spatial distribution created large drops in measured floating potentials in front of the magnetic pole surfaces where the plasma density was low, which suggests strong sheaths at these surfaces. The data taken have provided valuable information for future design and modeling validation, and complements ongoing internal measurement efforts on the NASA-300M.

  9. Oxygen Distribution and Potential Ammonia Oxidation in Floating, Liquid Manure Crusts

    DEFF Research Database (Denmark)

    Nielsen, Daniel Aagren; Nielsen, Lars Peter; Schramm, Andreas;

    2010-01-01

    Floating, organic crusts on liquid manure, stored as a result of animal production, reduce emission of ammonia (NH3) and other volatile compounds during storage. The occurrence of NO2- and NO3- in the crusts indicate the presence of actively metabolizing NH3 oxidizing bacteria (AOB) which may...... microorganisms, including AOB. The microbial activity may thus contribute to a considerable reduction of ammonia emissions from slurry tanks with well-developed crusts....

  10. Oxygen Distribution and Potential Ammonia Oxidation in Floating, Liquid Manure Crusts

    DEFF Research Database (Denmark)

    Nielsen, Daniel Aagren; Nielsen, Lars Peter; Schramm, Andreas

    2010-01-01

    Floating, organic crusts on liquid manure, stored as a result of animal production, reduce emission of ammonia (NH3) and other volatile compounds during storage. The occurrence of NO2- and NO3- in the crusts indicate the presence of actively metabolizing NH3 oxidizing bacteria (AOB) which may...... microorganisms, including AOB. The microbial activity may thus contribute to a considerable reduction of ammonia emissions from slurry tanks with well-developed crusts....

  11. Langmuir Probe Spacecraft Potential End Item Specification Document

    Science.gov (United States)

    Gilchrist, Brian; Curtis, Leslie (Technical Monitor)

    2001-01-01

    This document describes the Langmuir Probe Spacecraft Potential (LPSP) investigation of the plasma environment in the vicinity of the ProSEDS Delta II spacecraft. This investigation will employ a group of three (3) Langmuir Probe Assemblies, LPAs, mounted on the Delta II second stage to measure the electron density and temperature (n(sub e) and T(sub e)), the ion density (n(sub i)), and the spacecraft potential (V(sub s)) relative to the surrounding ionospheric plasma. This document is also intended to define the technical requirements and flight-vehicle installation interfaces for the design, development, assembly, testing, qualification, and operation of the LPSP subsystem for the Propulsive Small Expendable Deployer System (ProSEDS) and its associated Ground Support Equipment (GSE). This document also defines the interfaces between the LPSP instrument and the ProSEDS Delta II spacecraft, as well as the design, fabrication, operation, and other requirements established to meet the mission objectives. The LPSP is the primary measurement instrument designed to characterize the background plasma environment and is a supporting instrument for measuring spacecraft potential of the Delta II vehicle used for the ProSEDS mission. Specifically, the LPSP will use the three LPAs equally spaced around the Delta II body to make measurements of the ambient ionospheric plasma during passive operations to aid in validating existing models of electrodynamic-tether propulsion. These same probes will also be used to measure Delta II spacecraft potential when active operations occur. When the electron emitting plasma contractor is on, dense neutral plasma is emitted. Effective operation of the plasma contactor (PC) will mean a low potential difference between the Delta II second stage and the surrounding plasma and represents one of the voltage parameters needed to fully characterize the electrodynamic-tether closed circuit. Given that the LP already needs to be well away from any

  12. Potential productivity benefits of float-zone versus Czochralski crystal growth

    Science.gov (United States)

    Abe, T.

    1985-01-01

    Efficient mass production of single-crystal silicon is necessary for the efficient silicon solar arrays needed in the coming decade. However, it is anticipated that there will be difficulty growing such volumes of crystals using conventional Czochralski (Cz) methods. While the productivity of single crystals might increase with a crystal diameter increase, there are two obstacles to the mass production of large diameter Czochralski crystals, the long production cycle due to slow growth rate and the high heat requirements of the furnaces. Also counterproductive would be the large resistivity gradient along the growth direction of the crystals due to impurity concentration. Comparison between Float zone (FZ) and Cz crystal growth on the basis of a crystal 150 mm in diameter is on an order of two to four times in favor of the FZ method. This advantage results from high growth rates and steady-state growth while maintaining a dislocation-free condition and impurity segregation.

  13. China's floating population and the potential for HIV transmission: a social-behavioural perspective.

    Science.gov (United States)

    Anderson, A F; Qingsi, Z; Hua, X; Jianfeng, B

    2003-04-01

    Historical, geo-economic and behavioural perspectives are used in an exploratory analysis of China's migrant or 'floating' population as a factor in the spread of HIV on the mainland. Participants in the interview format survey (N = 506) included in-transit individuals in Beijing, and peddlers, restaurant workers, and employment seekers in Shanghai. When viewed in light of various social dynamics, the convenience survey data suggest that elements within this migrant population, as well as their rurally located partners and spouses, may be at increased risk of acquiring the virus. Given the sheer size and broad movement of this population, it is contended that it may well be a 'tipping point' factor in AIDS prevention and control in China.

  14. Analysis of the Potential for Use of Floating Photovoltaic Systems on Mine Pit Lakes: Case Study at the Ssangyong Open-Pit Limestone Mine in Korea

    Directory of Open Access Journals (Sweden)

    Jinyoung Song

    2016-02-01

    Full Text Available Recently, the mining industry has introduced renewable energy technologies to resolve power supply problems at mines operating in polar regions or other remote areas, and to foster substitute industries, able to benefit from abandoned sites of exhausted mines. However, little attention has been paid to the potential placement of floating photovoltaic (PV systems operated on mine pit lakes because it was assumed that the topographic characteristics of open-pit mines are unsuitable for installing any type of PV systems. This study analyzed the potential of floating PV systems on a mine pit lake in Korea to break this misconception. Using a fish-eye lens camera and digital elevation models, a shading analysis was performed to identify the area suitable for installing a floating PV system. The layout of the floating PV system was designed in consideration of the optimal tilt angle and array spacing of the PV panels. The System Advisor Model (SAM by National Renewable Energy Laboratory, USA, was used to conduct energy simulations based on weather data and the system design. The results indicated that the proposed PV system could generate 971.57 MWh/year. The economic analysis (accounting for discount rate and a 20-year operational lifetime showed that the net present value would be $897,000 USD, and a payback period of about 12.3 years. Therefore, we could know that the economic effect of the floating PV system on the mine pit lake is relatively higher than that of PV systems in the other abandoned mines in Korea. The annual reduction of greenhouse gas emissions was analyzed and found to be 471.21 tCO2/year, which is twice the reduction effect achieved by forest restoration of an abandoned mine site. The economic feasibility of a floating PV system on a pit lake of an abandoned mine was thus established, and may be considered an efficient reuse option for abandoned mines.

  15. FLOAT Project

    DEFF Research Database (Denmark)

    Sørensen, Eigil V.; Aarup, Bendt

    The objective of the FLOAT project is to study the reliability of high-performance fibre-reinforced concrete, also known as Compact Reinforced Composite (CRC), for the floats of wave energy converters. In order to reach a commercial breakthrough, wave energy converters need to achieve a lower price...... of energy produced, comparable to prices currently obtained from offshore wind power, and this can be done by the use of more suitable materials. The flotation device is a key part of converters, as it accounts for a considerable share of initial investment, up to 27% depending on the converter. CRC floats...

  16. Estimation of added-mass and damping coefficients of a tethered spherical float using potential flow theory

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Chandramohan, P.; Sastry, J.S.; Narasimhan, S.

    flow theory. Variations of added-mass and damping coefficients with respect to water depth, wave period and float size have been obtained. Variations of added-mass and damping coefficients with wave period show that these hydrodynamic coefficients...

  17. Floating Life

    Institute of Scientific and Technical Information of China (English)

    YIN PUMIN

    2010-01-01

    @@ One in six people in China have left their hometown in search of a better life and the number continues to grow,creating a challenge for host cities,according to a government report.The floating population,or people who live and work outside their permanent home,reached 211 million last year and the number could reach 350 million by 2050 if govemment policies remain unchanged,said the Report on the Development of China's Floating Population issued on June 26 by the National Population and Family Planning Commission (NPFPC).

  18. Analysis of the Potential for Use of Floating Photovoltaic Systems on Mine Pit Lakes: Case Study at the Ssangyong Open-Pit Limestone Mine in Korea

    OpenAIRE

    Jinyoung Song; Yosoon Choi

    2016-01-01

    Recently, the mining industry has introduced renewable energy technologies to resolve power supply problems at mines operating in polar regions or other remote areas, and to foster substitute industries, able to benefit from abandoned sites of exhausted mines. However, little attention has been paid to the potential placement of floating photovoltaic (PV) systems operated on mine pit lakes because it was assumed that the topographic characteristics of open-pit mines are unsuitable for install...

  19. On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortex-stabilized nitrogen plasma jet

    Energy Technology Data Exchange (ETDEWEB)

    Prevosto, L., E-mail: prevosto@waycom.com.ar; Mancinelli, B. R. [Grupo de Descargas Eléctricas, Departamento Ingeniería Electromecánica, Facultad Regional Venado Tuerto (UTN), Laprida 651, 2600 Venado Tuerto, Santa Fe (Argentina); Kelly, H. [Grupo de Descargas Eléctricas, Departamento Ingeniería Electromecánica, Facultad Regional Venado Tuerto (UTN), Laprida 651, 2600 Venado Tuerto, Santa Fe (Argentina); Instituto de Física del Plasma (CONICET), Departamento de Física, Facultad de Ciencias Exactas y Naturales (UBA) Ciudad Universitaria Pab. I, 1428 Buenos Aires (Argentina)

    2014-05-15

    Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N{sub 2} gas flow rate of 25 Nl/min, thoriated tungsten rod-type cathode, copper anode with 5 mm inner diameter). The interpretation of the double probe characteristic was based on a generalization of the standard double floating probe formulae for non-uniform plasmas coupled to a non-equilibrium plasma composition model. Perturbations caused by the current to the probe together with collisional and thermal processes inside the probe perturbed region were taken into account. Radial values of the average electron and heavy particle temperatures as well as the electron density were obtained. The calculation of the temperature values did not require any specific assumption about a temperature relationship between different particle species. An electron temperature of 10 900 ± 900 K, a heavy particle temperature of 9300 ± 900 K, and an electron density of about 3.5 × 10{sup 22} m{sup −3} were found at the jet centre at 3.5 mm downstream from the torch exit. Large deviations from kinetic equilibrium were found toward the outer border of the plasma jet. These results showed good agreement with those previously reported by the authors by using a single probe technique. The calculations have shown that this method is particularly useful for studying spraying-type plasma torches operated at power levels of about 15 kW.

  20. On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortex-stabilized nitrogen plasma jet.

    Science.gov (United States)

    Prevosto, L; Kelly, H; Mancinelli, B R

    2014-05-01

    Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type cathode, copper anode with 5 mm inner diameter). The interpretation of the double probe characteristic was based on a generalization of the standard double floating probe formulae for non-uniform plasmas coupled to a non-equilibrium plasma composition model. Perturbations caused by the current to the probe together with collisional and thermal processes inside the probe perturbed region were taken into account. Radial values of the average electron and heavy particle temperatures as well as the electron density were obtained. The calculation of the temperature values did not require any specific assumption about a temperature relationship between different particle species. An electron temperature of 10,900 ± 900 K, a heavy particle temperature of 9300 ± 900 K, and an electron density of about 3.5 × 10(22) m(-3) were found at the jet centre at 3.5 mm downstream from the torch exit. Large deviations from kinetic equilibrium were found toward the outer border of the plasma jet. These results showed good agreement with those previously reported by the authors by using a single probe technique. The calculations have shown that this method is particularly useful for studying spraying-type plasma torches operated at power levels of about 15 kW.

  1. Fully nonlinear time-domain simulation of a backward bent duct buoy floating wave energy converter using an acceleration potential method

    Directory of Open Access Journals (Sweden)

    Kyoung-Rok Lee

    2013-12-01

    Full Text Available A floating Oscillating Water Column (OWC wave energy converter, a Backward Bent Duct Buoy (BBDB, was simulated using a state-of-the-art, two-dimensional, fully-nonlinear Numerical Wave Tank (NWT technique. The hydrodynamic performance of the floating OWC device was evaluated in the time domain. The acceleration potential method, with a full-updated kernel matrix calculation associated with a mode decomposition scheme, was implemented to obtain accurate estimates of the hydrodynamic force and displacement of a freely floating BBDB. The developed NWT was based on the potential theory and the boundary element method with constant panels on the boundaries. The mixed Eulerian-Lagrangian (MEL approach was employed to capture the nonlinear free surfaces inside the chamber that interacted with a pneumatic pressure, induced by the time-varying airflow velocity at the air duct. A special viscous damping was applied to the chamber free surface to represent the viscous energy loss due to the BBDB's shape and motions. The viscous damping coefficient was properly selected using a comparison of the experimental data. The calculated surface elevation, inside and outside the chamber, with a tuned viscous damping correlated reasonably well with the experimental data for various incident wave conditions. The conservation of the total wave energy in the computational domain was confirmed over the entire range of wave frequencies.

  2. 内浮顶储罐雷击电位分布及危险性%Lightning potential distribution for internal floating roof tanks and its hazards

    Institute of Scientific and Technical Information of China (English)

    高鑫; 刘全桢; 刘宝全; 胡海燕; 毕晓蕾; 姜辉

    2013-01-01

    为了研究内浮顶储罐各金属部件间的电位分布及影响因素,进而明确雷击时储罐的放电部位及预防措施,建立了内浮顶储罐模型,开展了内浮顶储罐雷击模拟试验,获得了储罐各部位电压分布、导静电线电流流向等试验数据.结果表明:在雷电冲击时,无雷电流通过导静电线,浮盘与罐顶连接处电位相同,储罐整体电位可达上百千伏,易对储罐未进行等电位连接的金属部件放电,并引发事故.基于此,可以通过降低储罐的接地电阻降低储罐雷击时的电位,做好等电位连接可消除雷击储罐火灾事故的发生.研究结果对内浮顶储罐雷电防护措施的改进具有一定的指导意义.%In this paper, a model for internal floating roof tank is established to study the potential distribution on various metal components of internal floating roof tank and its influencing factors, and thus discharge locations of the tank and preventive measures are determined in case of lightning, and the experimental data of potential distribution on different locations of the storage tank and the current flow direction of discharge cable through performing lightning simulation test of internal floating roof tank are obtained. The results show that in the case of a lightning surge, there is no current passing through the static electricity discharge cable, thus the potentials of floating disc and tank top are the same, the overall potential of the tank can be up to hundreds of kilovolts, which will easily cause discharging to metal components that are not in equipotential connection and thus led to accidents. Based on this conclusion, the reduction of earthing resistance can decrease the potential of storage tank in case of lightning, and equipotential connection can eliminate the occurrence of fire accidents of the tank due to lightning. These research results have certain instructive significance for improving lightning protection measures of internal

  3. Lymphocytes as a neural probe : potential for studying psychiatric disorders

    NARCIS (Netherlands)

    Gladkevich, A; Kauffman, HF; Korf, J

    There is an increasing body evidence pointing to a close integration between the central nervous system (CNS) and immunological functions with lymphocytes playing therein a central role. The authors provide arguments to consider blood lymphocytes as a convenient probe of-an albeit-limited number of

  4. Comparison of potentially pathogenic free-living amoeba hosts by Legionella spp. in substrate-associated biofilms and floating biofilms from spring environments.

    Science.gov (United States)

    Hsu, Bing-Mu; Huang, Chin-Chun; Chen, Jung-Sheng; Chen, Nai-Hsiung; Huang, Jen-Te

    2011-10-15

    This study compares five genera of free-living amoebae (FLA) hosts by Legionella spp. in the fixed and floating biofilm samples from spring environments. Detection rate of Legionella spp. was 26.9% for the floating biofilms and 3.1% for the fixed biofilms. Acanthamoeba spp., Hartmanella vermiformis, and Naegleria spp. were more frequently detected in floating biofilm than in fixed biofilm samples. The percentage of pathogenic Acanthamoeba spp. among all the genus Acanthamoeba detected positive samples was 19.6%. The potential pathogenic Naegleria spp. (for example, Naegleria australiensis, Naegleria philippinensis, and Naegleria italica) was 54.2% to all the Naegleria detected positive samples. In the study, 12 serotypes of possible pneumonia causing Legionella spp. were detected, and their percentage in all the Legionella containing samples was 42.4%. The FLA parasitized by Legionella included unnamed Acanthamoeba genotype, Acanthamoeba griffini, Acanthamoeba jacobsi, H. vermiformis, and N. australiensis. Significant differences were also observed between the presence/absence of H. vermiformis and Legionella parasitism in FLA. Comparisons between the culture-confirmed method and the PCR-based detection method for detecting FLA and Legionella in biofilms showed great variation. Therefore, using these analysis methods together to detect FLA and Legionella is recommended.

  5. Floating shoulder

    OpenAIRE

    B. de Pablo Márquez; P. Castillón Bernal; I. Fuentes López

    2014-01-01

    La fractura concomitante de clavícula y escápula es una entidad poco frecuente que puede ser una de las causas de afectación del complejo suspensorio del hombro también denominado hombro flotante (floating shoulder). Se relaciona frecuentemente con traumatismos de alta energía. Presentamos un caso de esta patología en un paciente varón de 28 años que consultó por caída en bicicleta con contusión sobre hombro izquierdo. Se describen las diferentes opciones terapéuticas planteadas, las imágenes...

  6. Probing glycolytic and membrane potential oscillations in Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Poulsen, Allan K.; Andersen, Ann Zahle; Brasen, Jens Christian

    2008-01-01

    , while mitochondrial membrane potential was measured using the fluorescent dye DiOC(2)(3). The results show that, as opposed to NADH and other intermediates in glycolysis, intracellular glucose is not oscillating. Furthermore, oscillations in NADH and membrane potential are inhibited by the ATP...

  7. Floating Ocean Platform

    Science.gov (United States)

    2003-08-15

    REVIEW, 83-89 Int. Hydrogr. Rev., 1986 ARANHA , JAP PESCE, CP, EFFECT OF THE 2ND-ORDER POTENTIAL IN THE SLOW-DRIFT OSCILLATION OF A FLOATING STRUCTURE...Technology Conference, Annual Proceedings, v 3, Construction & Installation/Field Drilling and Development Systems, 1997, OTC 8696, p 133-142 Aranha , J...Andre J.P. (Petrobras/Depro); Nishimoto, Kazuo; Aranha , J.A.P.; Morooka, Celso K., Minimization of vertical wave exciting force and heave motion of a

  8. Floating shoulder

    Directory of Open Access Journals (Sweden)

    B. de Pablo Márquez

    2014-09-01

    Full Text Available La fractura concomitante de clavícula y escápula es una entidad poco frecuente que puede ser una de las causas de afectación del complejo suspensorio del hombro también denominado hombro flotante (floating shoulder. Se relaciona frecuentemente con traumatismos de alta energía. Presentamos un caso de esta patología en un paciente varón de 28 años que consultó por caída en bicicleta con contusión sobre hombro izquierdo. Se describen las diferentes opciones terapéuticas planteadas, las imágenes radiológicas y una revisión de la literatura.

  9. Probing the potential of polyester for CO₂ capture.

    Science.gov (United States)

    Zulfiqar, Sonia; Sarwar, Muhammad Ilyas

    2014-07-01

    Global warming, the major environmental issue confronted by humanity today, is caused by rising level of green house gases. Carbon capture and storage technologies offer potential for tapering CO₂ emission in the atmosphere. Adsorption is believed to be a promising technology for CO₂ capture. For this purpose, a polyester was synthesized by polycondensation of 1,3,5-benzenetricarbonyl trichloride and cyanuric acid in pyridine and dichloromethane mixture. The polymer was then characterized using FT-IR, TGA, BET surface area and pore size analysis, FESEM and CO₂ adsorption measurements. The CO₂ adsorption capacities of the polyester were evaluated at a pressure of 1bar and two different temperatures (273 and 298K). The performance of these materials to adsorb CO₂ at atmospheric pressure was measured by optimum CO₂ uptake of 0.244 mmol/g at 273K. The synthesized polyester, therefore, has the potential to be exploited as CO₂ adsorbent in pre-combustion capture process.

  10. SPECTROSCOPIC PROBING OF POTENTIAL SURFACES IN REACTIVE COLLISIONS

    OpenAIRE

    Telle, H.

    1985-01-01

    For the investigation of unstable intermediates, ABC*, which constitute the "transition states" in some simple reactive collisions, spectroscopic methods are beginning to provide valuable results. In a (relatively) simple approach molecules are photodissociated, and the interaction potentials during the process of separation (half-collision) are mapped in either absorption or emission ; the method will be described exemplary for the photolysis of NaI, giving rise to emission from NaI≠*. For r...

  11. Results of direct measurements of the plasma potential using a laser-heated emissive probe

    Energy Technology Data Exchange (ETDEWEB)

    Schrittwieser, R.; Sarma, A.; Amarandei, G.; Ionita, C. [Univ. of Innsbruck (Austria). Inst. for Ion Physics; Klinger, T.; Grulke, O.; Vogelsang, A.; Windisch, T. [Max Planck Inst. for Plasma Physics, Greifswald (Germany)

    2006-04-15

    Reliable diagnostics of the plasma potential is one of the most important challenges in context with the production, control and confinement of a plasma. Emissive probes are readily available as direct diagnostic tools for the plasma potential with a good temporal and spatial resolution in many plasmas, even up to middle-sized fusion experiments. We present the results of investigations on the heating of lanthanum hexaboride and graphite with an infrared diode laser and on the development of a laser-heated emissive probe. Such a probe has a higher electron emission, much longer life time and better time response than a conventional emissive wire probe. We have observed that from both materials electron emission current can be achieved sufficiently strongly even for dense laboratory and experimental fusion plasmas.

  12. Mitochondrial membrane potential probes and the proton gradient: a practical usage guide

    OpenAIRE

    Seth W Perry; Norman, John P.; Barbieri, Justin; Brown, Edward B.; Gelbard, Harris A.

    2011-01-01

    Fluorescent probes for monitoring mitochondrial membrane potential are frequently used for assessing mitochondrial function, particularly in the context of cell fate determination in biological and biomedical research. However, valid interpretation of results obtained with such probes requires careful consideration of numerous controls, as well as possible effects of non-protonic charges on dye behavior. In this context, we provide an overview of some of the important technical considerations...

  13. Graphene Transistor as a Probe for Streaming Potential

    OpenAIRE

    A. K. M. Newaz; D.A. Markov; Prasai, D.; Bolotin, K. I.

    2012-01-01

    We explore the dependence of electrical transport in a graphene field effect transistor (GraFET) on the flow of water/sodium chloride electrolyte within the immediate vicinity of that transistor. We find large and reproducible shifts in the charge neutrality point of GraFETs that are dependent on the liquid velocity and the ion concentration. We show that these shifts are consistent with the variation of the local electrochemical potential of the liquid next to graphene that are caused by the...

  14. Mitochondrial membrane potential probes and the proton gradient: a practical usage guide.

    Science.gov (United States)

    Perry, Seth W; Norman, John P; Barbieri, Justin; Brown, Edward B; Gelbard, Harris A

    2011-02-01

    Fluorescent probes for monitoring mitochondrial membrane potential are frequently used for assessing mitochondrial function, particularly in the context of cell fate determination in biological and biomedical research. However, valid interpretation of results obtained with such probes requires careful consideration of numerous controls, as well as possible effects of non-protonic charges on dye behavior. In this context, we provide an overview of some of the important technical considerations, controls, and parallel complementary assays that can be employed to help ensure appropriate interpretation of results, thus providing a practical usage guide for monitoring mitochondrial membrane potentials with cationic probes. In total, this review will help illustrate both the strengths and potential pitfalls of common mitochondrial membrane potential dyes, and highlight best-usage approaches for their efficacious application in life sciences research.

  15. Online traffic state estimation based on floating car data

    CERN Document Server

    Kesting, Arne

    2010-01-01

    Besides the traditional data collection by stationary detectors, recent advances in wireless and sensor technologies have promoted new potentials for a vehicle-based data collection and local dissemination of information. By means of microscopic traffic simulations we study the problem of online estimation of the current traffic situation based on floating car data. Our focus is on the estimation on the up- and downstream jam fronts determining the extension of traffic congestion. We study the impact of delayed information transmission by short-range communication via wireless LAN in contrast to instantaneous information transmission to the roadside units by means of mobile radio. The delayed information transmission leads to systematic estimation errors which cannot be compensated for by a higher percentage of probe vehicles. Additional flow measurements from stationary detectors allow for a model-based prediction which is effective for much lower floating car percentages than 1%.

  16. Microlensing by Kuiper, Oort, and Free-Floating Planets

    CERN Document Server

    Gould, Andrew

    2016-01-01

    Microlensing is generally thought to probe planetary systems only out to a few Einstein radii. Microlensing events generated by bound planets beyond about 10 Einstein radii generally do not yield any trace of their hosts, and so would be classified as free floating planets (FFPs). I show that it is already possible, using adaptive optics (AO), to constrain the presence of potential hosts to FFP candidates at separations comparable to the Oort Cloud. With next-generation telescopes, planets at Kuiper-Belt separations can be probed. Next generation telescopes will also permit routine vetting for all FFP candidates, simply by obtaining second epochs 4-8 years after the event. At present, the search for such hosts is restricted to within the "confusion limit" of theta_confus ~ 250 mas, but future WFIRST observations will allow one to probe beyond this confusion limit as well.

  17. Evaluation of potential cationic probes for the detection of proline and betaine.

    Science.gov (United States)

    Kalsoom, Umme; Breadmore, Michael C; Guijt, Rosanne M; Boyce, Mary C

    2014-12-01

    Osmoregulants are the substances that help plants to tolerate environmental extremes such as salinity and drought. Proline and betaine are two of the most commonly studied osmoregulants. An indirect UV CE method has been developed for simultaneous determination of these osmoregulants. A variety of reported probes and compounds were examined as potential probes for the indirect detection of proline and betaine. Mobility and UV-absorption properties highlighted sulfanilamide as a potential probe for indirect analysis of proline and betaine. Using 5 mM sulfanilamide at pH 2.2 with UV detection at 254 nm, proline and betaine were separated in less than 15 min. The LODs for proline and betaine were 11.6 and 28.3 μM, respectively. The developed method was successfully applied to quantification of these two osmoregulants in spinach and beetroot samples.

  18. Determination of Contact Potential Difference by the Kelvin Probe (Part I I. Basic Principles of Measurements

    Directory of Open Access Journals (Sweden)

    Vilitis O.

    2016-04-01

    Full Text Available Determination of electric potential difference using the Kelvin probe, i.e. vibrating capacitor technique, is one of the most sensitive measuring procedures in surface physics. Periodic modulation of distance between electrodes leads to changes in capacitance, thereby causing current to flow through the external circuit. The procedure of contactless, non-destructive determination of contact potential difference between an electrically conductive vibrating reference electrode and an electrically conductive sample is based on precise control measurement of Kelvin current flowing through a capacitor. The present research is devoted to creation of a new low-cost miniaturised measurement system to determine potential difference in real time and at high measurement resolution. Furthermore, using the electrode of a reference probe, the Kelvin method leads to both the indirect measurement of an electronic work function, or a contact potential of sample, and of a surface potential for insulator type samples.

  19. Validation of a 1-mm transit time flow probe and the potential for use in microsurgery

    DEFF Research Database (Denmark)

    Bonde, Christian T; Elberg, Jens J; Holstein-Rathlou, N.-H.

    2006-01-01

    The objective of this study was to validate a prototype transit time ultrasound flow probe (Medi-Stim Butterfly Flowmeter BF 2004) of only 1 mm and to evaluate its potential for use in microsurgery. Knowledge of the ability of this kind of system to measure flow in small vessels and at small flow...

  20. "Floating shoulder" injuries.

    Science.gov (United States)

    Heng, Kenneth

    2016-12-01

    "Floating shoulder" is a rare injury complex resulting from high-energy blunt force trauma to the shoulder, resulting in scapulothoracic dissociation. It is commonly associated with catastrophic neurovascular injury. Two cases of motorcyclists with floating shoulder injuries are described.

  1. Influence of temperature fluctuations on plasma turbulence investigations with Langmuir probes

    CERN Document Server

    Nold, B; Ramisch, M; Huang, Z; Müller, H W; Scott, B D; Stroth, U

    2011-01-01

    The reliability of Langmuir probe measurements for plasma-turbulence investigations is studied on GEMR gyro-fluid simulations and compared with results from conditionally sampled I-V characteristics as well as self-emitting probe measurements in the near scrape-off layer of the tokamak ASDEX Upgrade. In this region, simulation and experiment consistently show coherent in-phase fluctuations in density, plasma potential and also in electron temperature. Ion-saturation current measurements turn out to reproduce density fluctuations quite well. Fluctuations in the floating potential, however, are strongly influenced by temperature fluctuations and, hence, are strongly distorted compared to the actual plasma potential. These results suggest that interpreting floating as plasma-potential fluctuations while disregarding temperature effects is not justified near the separatrix of hot fusion plasmas. Here, floating potential measurements lead to corrupted results on the ExB dynamics of turbulent structures in the cont...

  2. A comparative study of sheath potential profile measurements with laser-heated and current-heated emissive probes

    Science.gov (United States)

    Kella, Vara Prasad; Mehta, Payal; Sarma, A.; Ghosh, J.; Chattopadhyay, P. K.

    2016-04-01

    Emissive Langmuir probe is one of the most efficient diagnostic tools available for plasma potential measurements. Extensive studies have been carried out in designing different kinds of conventional (electrically heated) emissive probes (CEPs) to estimate the plasma potential. Laser heated emissive probe (LHEP) has been developed with certain advantages over the conventional probes such as low evaporation rate of the probe material, high lifetime, and high emission levels. Most importantly, the LHEP uses laser to heat the probe-tip and does not require electric current to heat the probe-tip like in CEP. The heating current in CEP substantially affects the plasma potential measurements, especially in the regions of plasma where high electric and magnetic field gradients are present. In this paper, we studied the plasma potential structures in sheath-presheath region using both LHEP and CEP in an unmagnetized dc-filament discharge plasma. Measurements of sheath spatial potential profile using laser heated emissive probe are compared with those obtained using conventional emissive probe.

  3. Two photon fluorescence imaging of lipid membrane domains and potentials using advanced fluorescent probes

    Science.gov (United States)

    Kilin, Vasyl; Darwich, Zeinab; Richert, Ludovic; Didier, Pascal; Klymchenko, Andrey; Mély, Yves

    2013-02-01

    Biomembranes are ordered and dynamic nanoscale structures critical for cell functions. The biological functions of the membranes strongly depend on their physicochemical properties, such as electrostatics, phase state, viscosity, polarity and hydration. These properties are essential for the membrane structure and the proper folding and function of membrane proteins. To monitor these properties, fluorescence techniques and notably, two-photon microscopy appear highly suited due to their exquisite sensitivity and their capability to operate in complex biological systems, such as living cells and tissues. In this context, we have developed multiparametric environment-sensitive fluorescent probes tailored for precise location in the membrane bilayer. We notably developed probes of the 3-hydroxychromone family, characterized by an excited state intramolecular proton transfer reaction, which generates two tautomeric emissive species with well-separated emission bands. As a consequence, the response of these probes to changes in their environment could be monitored through changes in the ratios of the two bands, as well as through changes in the fluorescence lifetimes. Using two-photon ratiometric imaging and FLIM, these probes were used to monitor the surface membrane potential, and were applied to detect apoptotic cells and image membrane domains.

  4. Synthesis and Evaluation of 125I Labeled Chalcone Derivatives Containing Bithiophene Moiety as PotentialProbes

    Directory of Open Access Journals (Sweden)

    PENG Cheng

    2015-11-01

    Full Text Available In continuation of the investigation on the bithiophene structure as potentialprobes, two halogenated chalcone derivatives containing bithiophene moiety were designed and evaluated as imaging probes for Aβ plaques. In vitro fluorescence staining indicated that they could stain Aβ plaques in the brain sections of AD model mice specifically, in vitro binding assay further confirmed that they displayed high binding affinities to Aβ aggregates (Ki=2.33 nM and 0.88 nM. One radio-iodinated probe, 125I labeleled chalcone derivatives was obtained via iododestannylation reaction with high radiochemical yield and purity (>99%. Moreover, the 125I-labeling compound displayed specific labeling of Aβ plaques in the brain sections of AD model mice with low background, and the specific labeling could be confirmed by thioflavin-S staining. In vivo biodistribution in normal mice indicated that the 125I labeling compound exhibited low initial brain uptake (1.19%ID/g at 2 min and rapid clearance. These preliminary results suggest that 125I labeling compound may serve as novel Aβ imaging probe, although further modifications are needed to improve initial brain uptake.

  5. Local Surface Potential of GaN Nanostructures Probed by Kelvin Force Microscopy

    Institute of Scientific and Technical Information of China (English)

    GU Xiao-Xiao(顾骁骁); HUANG Da-Ming(黄大鸣); MORKOC Hadis

    2003-01-01

    We have measured the fluctuation in local surface potential of GaN epitaxial films having two different types of nanostructure, as-grown islands or, etched pits, by Kelvin probe force microscopy. We found that the perimeters of as-grown islands and the internal walls of, etched pits have lower surface potential as compared with the asgrown c-plane. The results show that the crystallographic facets tilted with respect to c-plane have higher work function and are electrically more active than c-surface.

  6. Test evaluation of potential heatshield contamination of an outer planet probe's gas sampling system

    Science.gov (United States)

    Kessler, W. C.

    1975-01-01

    The feasibility of retaining the heat shield for outer planet probes was investigated as a potential source of atmospheric sample contamination by outgassing. The onboard instruments which are affected by the concept are the pressure sensor, temperature sensor, IR detector, nephelometer, and gas sampling instruments. It was found that: (1) The retention of the charred heatshield and the baseline atmospheric sampling concepts are compatible with obtaining noncontaminated atmospheric samples. (2) Increasing the sampling tube length so that it extends beyond the viscous boundary layer eliminates contamination of the atmospheric sample. (3) The potential for contamination increases with angle of attack.

  7. Floating Offshore Wind in Oregon: Potential for Jobs and Economic Impacts in Oregon Coastal Counties from Two Future Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    This analysis examines the employment and potential economic impacts of large-scale deployment of offshore wind technology off the coast of Oregon. This analysis examines impacts within the seven Oregon coastal counties: Clatsop, Tillamook, Lincoln, Lane, Douglas, Coos, and Curry. The impacts highlighted here can be used in county, state, and regional planning discussions and can be scaled to get a general sense of the economic development opportunities associated with other deployment scenarios.

  8. Evaluation of a new high power, wide separation laser Doppler probe : Potential measurement of deeper tissue blood flow

    NARCIS (Netherlands)

    Clough, Geraldine; Chipperfield, Andrew; Byrne, Christopher; de Mul, Frits; Gush, Rodney

    2009-01-01

    Objective: To compare the output from a novel high power, wide separation laser Doppler flow probe (DP1-V2-HP, 4 mm, with IRLD20) with that of a standard flow probe (DP1-V2, 0.5 mm, with DRT4) (Moor UK) and to explore its potential for use in the noninvasive measurement of blood flow in deeper tissu

  9. Design of a set of probes with high potential for influenza virus epidemiological surveillance

    Science.gov (United States)

    Carreño-Durán, Luis R; Larios-Serrato, V; Jaimes-Díaz, Hueman; Pérez-Cervantes, Hilda; Zepeda-López, Héctor; Sánchez-Vallejo, Carlos Javier; Olguín-Ruiz, Gabriela Edith; Maldonado-Rodríguez, Rogelio; Méndez-Tenorio, Alfonso

    2013-01-01

    An Influenza Probe Set (IPS) consisting in 1,249 9-mer probes for genomic fingerprinting of closely and distantly related Influenza Virus strains was designed and tested in silico. The IPS was derived from alignments of Influenza genomes. The RNA segments of 5,133 influenza strains having diverse degree of relatedness were concatenated and aligned. After alignment, 9-mer sites having high Shannon entropy were searched. Additional criteria such as: G+C content between 35 to 65%, absence of dimer or trimer consecutive repeats, a minimum of 2 differences between 9mers and selecting only sequences with Tm values between 34.5 and 36.5oC were applied for selecting probes with high sequential entropy. Virtual Hybridization was used to predict Genomic Fingerprints to assess the capability of the IPS to discriminate between influenza and related strains. Distance scores between pairs of Influenza Genomic Fingerprints were calculated, and used for estimating Taxonomic Trees. Visual examination of both Genomic Fingerprints and Taxonomic Trees suggest that the IPS is able to discriminate between distant and closely related Influenza strains. It is proposed that the IPS can be used to investigate, by virtual or experimental hybridization, any new, and potentially virulent, strain. PMID:23750091

  10. Potential Research on Holographic Schwinger Effect with Rotating Probe D3-brane etc

    CERN Document Server

    Xu, Hao

    2016-01-01

    This paper presents the potential research on holographic Schwinger effect with rotating probe D3-brane etc. We discover, for zero temperature case in the Schwinger effect, the faster the angular velocity, the farther the distance of the test particles pair at D3-brane, the potential barrier of total potential energy also grows higher and wider. This paper discovers: at finite temperature, when S5 without rotation near the horizon, there is the failure of the Schwinger effect because the particles will remain at annihilate state, which is an absolute vacuum state. However, the angular velocity in S5 will avoid the existence of the absolute vacuum near the horizon. Both zero and finite temperature states, the achieved results completely agree with the results of the DBI action. So the theories of this paper are consistent, all these show that these theories will play important roles in pair production research in the future.

  11. Fluorinated matrix metalloproteinases inhibitors--Phosphonate based potential probes for positron emission tomography.

    Science.gov (United States)

    Beutel, Bernd; Daniliuc, Constantin G; Riemann, Burkhard; Schäfers, Michael; Haufe, Günter

    2016-02-15

    Fluorine-containing inhibitors of matrix metalloproteinases (MMPs) can serve as lead structures for the development of (18)F-labeled radioligands. These compounds might be useful as non-invasive imaging probes to characterize pathologies associated with increased MMP activity. Results with a series of fluorinated analogs of a known biphenyl sulfonamide inhibitor have shown that fluorine can be incorporated into two different positions of the molecular scaffold without significant loss of potency in the nanomolar range. Additionally, the potential of a hitherto unknown fluorinated tertiary sulfonamide as MMP inhibitor has been demonstrated.

  12. Electrical Potential of Acupuncture Points: Use of a Noncontact Scanning Kelvin Probe

    Directory of Open Access Journals (Sweden)

    Brian J. Gow

    2012-01-01

    Full Text Available Objective. Acupuncture points are reportedly distinguishable by their electrical properties. However, confounders arising from skin-to-electrode contact used in traditional electrodermal methods have contributed to controversies over this claim. The Scanning Kelvin Probe is a state-of-the-art device that measures electrical potential without actually touching the skin and is thus capable of overcoming these confounding effects. In this study, we evaluated the electrical potential profiles of acupoints LI-4 and PC-6 and their adjacent controls. We hypothesize that acupuncture point sites are associated with increased variability in potential compared to adjacent control sites. Methods. Twelve healthy individuals were recruited for this study. Acupuncture points LI-4 and PC-6 and their adjacent controls were assessed. A 2 mm probe tip was placed over the predetermined skin site and adjusted to a tip-to-sample distance of 1.0 mm under tip oscillation settings of 62.4 Hz frequency. A surface potential scan spanning a 1.0 cm × 1.0 cm area was obtained. Results. At both the PC-6 and LI-4 sites, no significant differences in mean potential were observed compared to their respective controls (Wilcoxon rank-sum test, and 0.79, resp.. However, the LI-4 site was associated with significant increase in variability compared to its control as denoted by standard deviation and range ( and 0.0005, resp.. At the PC-6 site, no statistical differences in variability were observed. Conclusion. Acupuncture points may be associated with increased variability in electrical potential.

  13. Probing Theories of Gravity with Phase Space-Inferred Potentials of Galaxy Clusters

    CERN Document Server

    Stark, Alejo; Kern, Nicholas; Gifford, Daniel; Zhao, Gong-Bo; Li, Baojiu; Koyama, Kazuya; Nichol, Robert C

    2016-01-01

    Modified theories of gravity provide us with a unique opportunity to generate innovative tests of gravity. In Chameleon f(R) gravity, the gravitational potential differs from the weak-field limit of general relativity (GR) in a mass dependent way. We develop a probe of gravity which compares high mass clusters, where Chameleon effects are weak, to low mass clusters, where the effects can be strong. We utilize the escape velocity edges in the radius/velocity phase space to infer the gravitational potential profiles on scales of 0.3-1 virial radii. We show that the escape edges of low mass clusters are enhanced compared to GR, where the magnitude of the difference depends on the background field value |fR0|. We validate our probe using N-body simulations and simulated light cone galaxy data. For a DESI (Dark Energy Spectroscopic Instrument) Bright Galaxy Sample, including observational systematics, projection effects, and cosmic variance, our test can differentiate between GR and Chameleon f(R) gravity models, ...

  14. Test evaluation of potential heat shield contamination of an Outer Planet Probe's atmospheric sampling system

    Science.gov (United States)

    Kessler, W. C.; Woeller, F. H.; Wilkins, M. E.

    1975-01-01

    An Outer Planets Probe which retains the charred heatshield during atmospheric descent must deploy a sampling tube through the heatshield to extract atmospheric samples for analysis. Once the sampling tube is deployed, the atmospheric samples ingested must be free of contaminant gases generated by the heatshield. Outgassing products such as methane and water vapor are present in planetary atmospheres and hence, ingestion of such species would result in gas analyzer measurement uncertainties. This paper evaluates the potential for, and design impact of, the extracted atmospheric samples being contaminated by heatshield outgassing products. Flight trajectory data for Jupiter, Saturn and Uranus entries are analyzed to define the conditions resulting in the greatest potential for outgassing products being ingested into the probe's sampling system. An experimental program is defined and described which simulates the key flow field features for a planetary flight in a ground-based test facility. The primary parameters varied in the test include: sampling tube length, injectant mass flow rate and angle of attack. Measured contaminant levels predict the critical sampling tube length for contamination avoidance. Thus, the study demonstrates the compatibility of a retained heatshield concept and high quality atmospheric trace species measurements.

  15. Profile measurements in the plasma edge of MAST using a ball pen probe

    CERN Document Server

    Walkden, N R; Allan, S; Dudson, B D; Elmore, S; Fishpool, G; Harrison, J; Kirk, A; Komm, M

    2014-01-01

    The ball pen probe (BPP) technique is used successfully to make profile measurements of plasma potential, electron temperature and radial electric field on the Mega Amp Spherical Tokamak (MAST). The potential profile measured by the BPP is shown to significantly differ from the floating potential both in polarity and profile shape. By combining the BPP potential and the floating potential the electron temperature can be measured, which is compared with the Thomson scattering (TS) diagnostic. Excellent agreement between the two diagnostics is obtained when secondary electron emission is accounted for in the floating potential. From the BPP profile an estimate of the radial electric field is extracted which is shown to be of the order ~1kV/m and increases with plasma current. Corrections to the BPP measurement, constrained by the TS comparison, introduce uncertainty into the ER measurements. The uncertainty is most significant in the electric field well inside the separatrix. The electric field is used to estim...

  16. 基于势流理论的浮式潮流能电站载体耐波性分析%Sea-keeping prediction of floating tidal turbine barge based on 3D potential theory

    Institute of Scientific and Technical Information of China (English)

    蒋银; 张亮

    2013-01-01

    Based on 3D potential theory, involved impact from tidal turbine to floating barge, the sea-keeping performance of a floating tidal turbine was calculated and analyzed by Hydrostar, a general analysis program for calculation of wave-structure interaction. Besides, the short-term prediction of the sea keeping of the ship was done related to the extreme sea state in the work site. The calculation results show that the rolling motion of the floating barge is relatively violent in beam sea and shipping of green water tends to occur in bow sea.%基于三维势流理论,考虑水轮机对载体的影响,运用 Hydrostar 计算评估某浮式潮流电站载体的耐波性。并结合潮流电站工作当地极限海况,对该载体的耐波性进行短期预报。计算结果表明,该潮流电站浮式载体横浪状态下横摇响应大;在迎浪状态下,潮流电站浮式载体最容易甲板上浪。

  17. Bio-optical profiling floats as new observational tools for biogeochemical and ecosystem studies: Potential synergies with ocean color remote sensing

    Energy Technology Data Exchange (ETDEWEB)

    Claustre, H.; Bishop, J.; Boss, E.; Bernard, S.; Berthon, J.-F.; Coatanoan, C.; Johnson, K.; Lotiker, A.; Ulloa, O.; Perry, M.J.; D' Ortenzio, F.; D' andon, O.H.F.; Uitz, J.

    2009-10-01

    Profiling floats now represent a mature technology. In parallel with their emergence, the field of miniature, low power bio-optical and biogeochemical sensors is rapidly evolving. Over recent years, the bio-geochemical and bio-optical community has begun to benefit from the increase in observational capacities by developing profiling floats that allow the measurement of key biooptical variables and subsequent products of biogeochemical and ecosystem relevance like Chlorophyll a (Chla), optical backscattering or attenuation coefficients which are proxies of Particulate Organic Carbon (POC), Colored Dissolved Organic Matter (CDOM). Thanks to recent algorithmic improvements, new bio-optical variables such as backscattering coefficient or absorption by CDOM, at present can also be extracted from space observations of ocean color. In the future, an intensification of in situ measurements by bio-optical profiling floats would permit the elaboration of unique 3D/4D bio-optical climatologies, linking surface (remotely detected) properties to their vertical distribution (measured by autonomous platforms), with which key questions in the role of the ocean in climate could be addressed. In this context, the objective of the IOCCG (International Ocean Color Coordinating Group) BIO-Argo working group is to elaborate recommendations in view of a future use of bio-optical profiling floats as part of a network that would include a global array that could be 'Argo-relevant', and specific arrays that would have more focused objectives or regional targets. The overall network, realizing true multi-scale sustained observations of global marine biogeochemistry and biooptics, should satisfy the requirements for validation of ocean color remote sensing as well as the needs of a wider community investigating the impact of global change on biogeochemical cycles and ecosystems. Regarding the global profiling float array, the recommendation is that Chla as well as POC should be the

  18. The sheath effect on the floating harmonic method

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaewon; Kim, Kyung-Hyun; Chung, Chin-Wook, E-mail: joykang@hanyang.ac.kr [Department of Electrical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of)

    2015-12-15

    The floating harmonic method biases sinusoidal voltage to a probe sheath, and as its response, harmonic currents can be obtained. These currents can be used to determine the plasma parameters. However, different shapes of probes have different shapes of sheaths that can affect the diagnostic results. However, no research has been done on the sheath effect on the floating harmonic method. Therefore, we investigate the effect of the sheath during floating harmonic diagnostics by comparing cylindrical and planar probes. While the sinusoidal voltages were applied to a probe, because the sheath oscillated, the time variant ion current and their harmonic currents were added to the electron harmonic currents. In the floating harmonic method, the harmonic currents are composed of only the electron harmonic currents. Therefore, the ion harmonic currents affect the diagnostic results. In particular, the electron temperature obtained by the small probe tip was higher than that of the large probe tip. This effect was exacerbated when the ratio of the probe tip radius to the sheath length was smaller.

  19. Probing the resonance potential in the F atom reaction with hydrogen deuteride with spectroscopic accuracy

    Science.gov (United States)

    Ren, Zefeng; Che, Li; Qiu, Minghui; Wang, Xingan; Dong, Wenrui; Dai, Dongxu; Wang, Xiuyan; Yang, Xueming; Sun, Zhigang; Fu, Bina; Lee, Soo-Y.; Xu, Xin; Zhang, Dong H.

    2008-01-01

    Reaction resonances are transiently trapped quantum states along the reaction coordinate in the transition state region of a chemical reaction that could have profound effects on the dynamics of the reaction. Obtaining an accurate reaction potential that holds these reaction resonance states and eventually modeling quantitatively the reaction resonance dynamics is still a great challenge. Up to now, the only viable way to obtain a resonance potential is through high-level ab initio calculations. Through highly accurate crossed-beam reactive scattering studies on isotope-substituted reactions, the accuracy of the resonance potential could be rigorously tested. Here we report a combined experimental and theoretical study on the resonance-mediated F + HD → HF + D reaction at the full quantum state resolved level, to probe the resonance potential in this benchmark system. The experimental result shows that isotope substitution has a dramatic effect on the resonance picture of this important system. Theoretical analyses suggest that the full-dimensional FH2 ground potential surface, which was believed to be accurate in describing the resonance picture of the F + H2 reaction, is found to be insufficiently accurate in predicting quantitatively the resonance picture for the F + HD → HF + D reaction. We constructed a global potential energy surface by using the CCSD(T) method that could predict the correct resonance peak positions as well as the dynamics for both F + H2 → HF + H and F + HD → HF + D, providing an accurate resonance potential for this benchmark system with spectroscopic accuracy. PMID:18687888

  20. Synthesis and Bioconjugation of Gold Nanoparticles as Potential Molecular Probes for Light-Based Imaging Techniques

    Directory of Open Access Journals (Sweden)

    Raja Gopal Rayavarapu

    2007-01-01

    Full Text Available We have synthesized and characterized gold nanoparticles (spheres and rods with optical extinction bands within the “optical imaging window.” The intense plasmon resonant driven absorption and scattering peaks of these nanoparticles make them suitable as contrast agents for optical imaging techniques. Further, we have conjugated these gold nanoparticles to a mouse monoclonal antibody specific to HER2 overexpressing SKBR3 breast carcinoma cells. The bioconjugation protocol uses noncovalent modes of binding based on a combination of electrostatic and hydrophobic interactions of the antibody and the gold surface. We discuss various aspects of the synthesis and bioconjugation protocols and the characterization results of the functionalized nanoparticles. Some proposed applications of these potential molecular probes in the field of biomedical imaging are also discussed.

  1. The potential of asteroseismology for probing the core chemical stratification in white dwarf stars

    CERN Document Server

    Giammichele, N; Brassard, P; G.,; Fontaine,

    2016-01-01

    Context. The details of the C/O core structure in white dwarf stars has mostly remained inaccessible to the technique of asteroseismology, despite several attempts carried out in the past. Aims. We re-assess the potential of asteroseismology for probing the chemical stratification in white dwarf cores, in light of new highly efficient tools recently developed for that purpose. Methods. Using the forward modeling approach and a new parameterization for the core chemical stratification in ZZ Ceti stars, we test several situations typical of the usually limited constraints available, such as small numbers of observed independent modes, to carry out asteroseismology of these stars. Results. We find that, even with a limited number of modes, the core chemical stratification (in particular, the location of the steep chemical transitions expected in the oxygen profile) can be determined quite precisely due to the significant sensitivity of some confined modes to partial reflexion (trapping) effects. These effects ar...

  2. Surface Potential Analysis of Nanoscale Biomaterials and Devices Using Kelvin Probe Force Microscopy

    Directory of Open Access Journals (Sweden)

    Hyungbeen Lee

    2016-01-01

    Full Text Available In recent years, Kelvin probe force microscopy (KPFM has emerged as a versatile toolkit for exploring electrical properties on a broad range of nanobiomaterials and molecules. An analysis using KPFM can provide valuable sample information including surface potential and work function of a certain material. Accordingly, KPFM has been widely used in the areas of material science, electronics, and biomedical science. In this review, we will briefly explain the setup of KPFM and its measuring principle and then survey representative results of various KPFM applications ranging from material analysis to device analysis. Finally, we will discuss some possibilities of KPFM on whether it is applicable to various sensor systems. Our perspective shed unique light on how KPFM can be used as a biosensor as well as equipment to measure electrical properties of materials and to recognize various molecular interactions.

  3. Simulated floating zone method

    OpenAIRE

    Ozawa, Ryo; Kato, Yasuyuki; Motome, Yukitoshi

    2016-01-01

    This paper provides the simulated floating zone (SFZ) method that is an efficient simulation technique to obtain thermal equilibrium states, especially useful when domain formation prevents the system from reaching a spatially-uniform stable state. In the SFZ method, the system is heated up locally, and the heated region is steadily shifted, similar to the floating zone method for growing a single crystal with less lattice defect and impurity in experiments. We demonstrate that the SFZ method...

  4. 2D spatial profile measurements of potential fluctuation with heavy ion beam probe on the Large Helical Device

    Science.gov (United States)

    Shimizu, A.; Ido, T.; Nishiura, M.; Kato, S.; Ogawa, K.; Takahashi, H.; Igami, H.; Yoshimura, Y.; Kubo, S.; Shimozuma, T.

    2016-11-01

    Two-dimensional spatial profiles of potential fluctuation were measured with the heavy ion beam probe (HIBP) in the Large Helical Device (LHD). For 2D spatial profile measurements, the probe beam energy has to be changed, which requires the adjustment of many deflectors in the beam transport line to optimize the beam trajectory, since the transport line of LHD-HIBP system is long. The automatic beam adjustment system was developed, which allows us to adjust the beam trajectory easily. By analyzing coherence between potential fluctuation and magnetic probe signal, the noise level of the mode power spectrum of the potential fluctuation can be reduced. By using this method, the 2D spatial profile of potential fluctuation profile was successfully obtained.

  5. Electron temperature and density probe for small aeronomy satellites

    Energy Technology Data Exchange (ETDEWEB)

    Oyama, K.-I. [Plasma and Space Science Center, National Cheng Kung University, Tainan, Taiwan (China); Institute of Space and Plasma Sciences, National Cheng Kung University, Tainan, Taiwan (China); International Center for Space Weather Study and education, Kyushu University, Fukuoka (Japan); Hsu, Y. W.; Jiang, G. S.; Chen, W. H.; Liu, W. T. [Plasma and Space Science Center, National Cheng Kung University, Tainan, Taiwan (China); Cheng, C. Z.; Fang, H. K. [Plasma and Space Science Center, National Cheng Kung University, Tainan, Taiwan (China); Institute of Space and Plasma Sciences, National Cheng Kung University, Tainan, Taiwan (China)

    2015-08-15

    A compact and low power consumption instrument for measuring the electron density and temperature in the ionosphere has been developed by modifying the previously developed Electron Temperature Probe (ETP). A circuit block which controls frequency of the sinusoidal signal is added to the ETP so that the instrument can measure both T{sub e} in low frequency mode and N{sub e} in high frequency mode from the floating potential shift of the electrode. The floating potential shift shows a minimum at the upper hybrid resonance frequency (f{sub UHR}). The instrument which is named “TeNeP” can be used for tiny satellites which do not have enough conductive surface area for conventional DC Langmuir probe measurements. The instrument also eliminates the serious problems associated with the contamination of satellite surface as well as the sensor electrode.

  6. Electron temperature and density probe for small aeronomy satellites

    Science.gov (United States)

    Oyama, K.-I.; Hsu, Y. W.; Jiang, G. S.; Chen, W. H.; Cheng, C. Z.; Fang, H. K.; Liu, W. T.

    2015-08-01

    A compact and low power consumption instrument for measuring the electron density and temperature in the ionosphere has been developed by modifying the previously developed Electron Temperature Probe (ETP). A circuit block which controls frequency of the sinusoidal signal is added to the ETP so that the instrument can measure both Te in low frequency mode and Ne in high frequency mode from the floating potential shift of the electrode. The floating potential shift shows a minimum at the upper hybrid resonance frequency (fUHR). The instrument which is named "TeNeP" can be used for tiny satellites which do not have enough conductive surface area for conventional DC Langmuir probe measurements. The instrument also eliminates the serious problems associated with the contamination of satellite surface as well as the sensor electrode.

  7. Operation circuits of emissive probes for determination of potentials in discharge plasmas; Circuitos de operacao de sondas emissivas para a determinacao de potenciais em plasmas de descargas eletricas

    Energy Technology Data Exchange (ETDEWEB)

    Petraconi, G.; Maciel, H.S.; Borges, C. [Centro Tecnico Aeroespacial, Sao Jose dos Campos, SP (Brazil). Inst. Tecnologico de Aeronautica. Lab. de Plasmas e Processos

    1999-12-01

    In this paper two circuits for plasma potential measurement are presented. The first one is an emissive probe control circuit for fast probe characteristics reading. The second one is a differential emissive probe control circuit that adjusts the bias voltage automatically and allows a direct potential measurement. These circuits present inconveniences if the characteristic of the probe does not exhibit an ideal saturation of the current as show the results obtained in continuous current discharge and RF discharge. (author)

  8. Plasma Potential and Langmuir Probe Measurements in the Near-field Plume of the NASA-457Mv2 Hall Thruster

    Science.gov (United States)

    Shastry, Rohit; Huang, Wensheng; Herman, Daniel A.; Soulas, George C.; Kamhawi, Hani

    2012-01-01

    In order to further the design of future high-power Hall thrusters and provide experimental validation for ongoing modeling efforts, plasma potential and Langmuir probe measurements were performed on the 50-kW NASA-457Mv2. An electrostatic probe array comprised of a near-field Faraday probe, single Langmuir probe, and emissive probe was used to interrogate the near-field plume from approximately 0.1 - 2.0 mean thruster diameters downstream of the thruster exit plane at the following operating conditions: 300 V, 400 V and 500 V at 30 kW and 500 V at 50 kW. Results have shown that the acceleration zone is limited to within 0.4 mean thruster diameters of the exit plane while the high-temperature region is limited to 0.25 mean thruster diameters from the exit plane at all four operating conditions. Maximum plasma potentials in the near-field at 300 and 400 V were approximately 50 V with respect to cathode potential, while maximum electron temperatures varied from 24 - 32 eV, depending on operating condition. Isothermal lines at all operating conditions were found to strongly resemble the magnetic field topology in the high-temperature regions. This distribution was found to create regions of high temperature and low density near the magnetic poles, indicating strong, thick sheath formation along these surfaces. The data taken from this study are considered valuable for future design as well as modeling validation.

  9. FLOAT Project - Task 1

    DEFF Research Database (Denmark)

    Marchalot, Tanguy; Kofoed, Jens Peter; Sørensen, Eigil V.

    The objective of the FLOAT project is to study the reliability of high-performance fibre-reinforced concrete, also known as Compact Reinforced Composite (CRC), for the floats of wave energy converters. In order to reach commercial breakthrough, wave energy converters need to achieve a lower price...... of energy produced, comparable to prices currently obtained from offshore wind power, and this can be done by the use of more suitable materials. The flotation device is a key part of converters, as it accounts for a considerable share of initial investment, up to 27% depending on the converter (dexawave.......com, 2011). CRC floats could be a very cost-effective technology with enhanced loading capacity and environmental resistance, and very low maintenance requirements, affecting directly the final energy price. The project involves DEXA Wave Energy Ltd, Wave Star A/S, Aalborg University and Hi-Con A...

  10. Stigmatellin probes the electrostatic potential in the QB site of the photosynthetic reaction center.

    Science.gov (United States)

    Gerencsér, László; Boros, Bogáta; Derrien, Valerie; Hanson, Deborah K; Wraight, Colin A; Sebban, Pierre; Maróti, Péter

    2015-01-20

    The electrostatic potential in the secondary quinone (QB) binding site of the reaction center (RC) of the photosynthetic bacterium Rhodobacter sphaeroides determines the rate and free energy change (driving force) of electron transfer to QB. It is controlled by the ionization states of residues in a strongly interacting cluster around the QB site. Reduction of the QB induces change of the ionization states of residues and binding of protons from the bulk. Stigmatellin, an inhibitor of the mitochondrial and photosynthetic respiratory chain, has been proven to be a unique voltage probe of the QB binding pocket. It binds to the QB site with high affinity, and the pK value of its phenolic group monitors the local electrostatic potential with high sensitivity. Investigations with different types of detergent as a model system of isolated RC revealed that the pK of stigmatellin was controlled overwhelmingly by electrostatic and slightly by hydrophobic interactions. Measurements showed a high pK value (>11) of stigmatellin in the QB pocket of the dark-state wild-type RC, indicating substantial negative potential. When the local electrostatics of the QB site was modulated by a single mutation, L213Asp → Ala, or double mutations, L213Asp-L212Glu → Ala-Ala (AA), the pK of stigmatellin dropped to 7.5 and 7.4, respectively, which corresponds to a >210 mV increase in the electrostatic potential relative to the wild-type RC. This significant pK drop (ΔpK > 3.5) decreased dramatically to (ΔpK > 0.75) in the RC of the compensatory mutant (AA+M44Asn → AA+M44Asp). Our results indicate that the L213Asp is the most important actor in the control of the electrostatic potential in the QB site of the dark-state wild-type RC, in good accordance with conclusions of former studies using theoretical calculations or light-induced charge recombination assay.

  11. Floating offshore turbines

    DEFF Research Database (Denmark)

    Tande, John Olav Giæver; Merz, Karl; Schmidt Paulsen, Uwe

    2014-01-01

    phase applying (mostly) well-known technology, albeit in a new setting. DeepWind is a European research project based mostly on new technology. The concepts are described in some detail with emphasis on control and operation. Prospects are discussed including technical challenges and a performance...... metric of energy production per unit steel mass. Floating offshore wind turbines represent a promising technology. The successful operation of HyWind and WindFloat in full scale demonstrates a well advanced technology readiness level, where further development will go into refining the concepts, cost...

  12. Floating Versus Sinking

    Science.gov (United States)

    Vella, Dominic

    2015-01-01

    Small objects that are more dense than water may still float at the air-water interface because of surface tension. Whether this is possible depends not only on the density and size of the object, but also on its shape and surface properties, whether other objects are nearby, and how gently the object is placed at the interface. This review surveys recent work to quantify when objects can float and when they must sink. Much interest in this area has been driven by studies of the adaptations of water-walking insects to life at interfaces. I therefore discuss these results in the context of this and other applications.

  13. Cell-based proteome profiling of potential dasatinib targets by use of affinity-based probes.

    Science.gov (United States)

    Shi, Haibin; Zhang, Chong-Jing; Chen, Grace Y J; Yao, Shao Q

    2012-02-15

    Protein kinases (PKs) play an important role in the development and progression of cancer by regulating cell growth, survival, invasion, metastasis, and angiogenesis. Dasatinib (BMS-354825), a dual Src/Abl inhibitor, is a promising therapeutic agent with oral bioavailability. It has been used for the treatment of imatinib-resistant chronic myelogenous leukemia (CML). Most kinase inhibitors, including Dasatinib, inhibit multiple cellular targets and do not possess exquisite cellular specificity. Recent efforts in kinase research thus focus on the development of large-scale, proteome-wide chemical profiling methods capable of rapid identification of potential cellular (on- and off-) targets of kinase inhibitors. Most existing approaches, however, are still problematic and in many cases not compatible with live-cell studies. In this work, we have successfully developed a cell-permeable kinase probe (DA-2) capable of proteome-wide profiling of potential cellular targets of Dasatinib. In this way, highly regulated, compartmentalized kinase-drug interactions were maintained. By comparing results obtained from different proteomic setups (live cells, cell lysates, and immobilized affinity matrix), we found DA-2 was able to identify significantly more putative kinase targets. In addition to Abl and Src family tyrosine kinases, a number of previously unknown Dasatinib targets have been identified, including several serine/threonine kinases (PCTK3, STK25, eIF-2A, PIM-3, PKA C-α, and PKN2). They were further validated by pull-down/immunoblotting experiments as well as kinase inhibition assays. Further studies are needed to better understand the exact relevance of Dasatinib and its pharmacological effects in relation to these newly identified cellular targets. The approach developed herein should be amenable to the study of many of the existing reversible drugs/drug candidates.

  14. Sensitive bioassay for detection of PPAR{alpha} potentially hazardous ligands with gold nanoparticle probe

    Energy Technology Data Exchange (ETDEWEB)

    Xia, Wei; Wan, Yan-Jian [Minister of Education Key Laboratory of Environment and Health, School of Public Health, Tongji Medical College of Huazhong University of Science and Technology, Wuhan, Hubei Province 430030 (China); Wang, Xianliang [Division of Environmental Pollution and Human Health, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Li, Yuan-yuan; Yang, Wen-Jie; Wang, Chun-Xiang [Minister of Education Key Laboratory of Environment and Health, School of Public Health, Tongji Medical College of Huazhong University of Science and Technology, Wuhan, Hubei Province 430030 (China); Xu, Shun-qing, E-mail: shunqing@mails.tjmu.edu.cn [Minister of Education Key Laboratory of Environment and Health, School of Public Health, Tongji Medical College of Huazhong University of Science and Technology, Wuhan, Hubei Province 430030 (China)

    2011-09-15

    Highlights: {yields} We develop a sensitive and high throughput method to screen PPAR{alpha} ligands. {yields} This method is based on the ligand-receptor interaction on microplate. {yields} The sensitivity is increased through sliver enhancement on captured gold nanoparticle probes. {yields} There is a significant correlation between the bioassay and LC-MS for water spiked samples. - Abstract: There are so many kinds of peroxisome proliferator-activated receptor {alpha} (PPAR{alpha}) ligands with hazardous effect for human health in the environment, such as certain herbicides, plasticizers and drugs. Among these agonists, perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and mono-(2-ethylhexyl) phthalate (MEHP) are mostly investigated due to their persistence and accumulation in environment and their potential toxicity via PPAR{alpha}. This investigation aims at developing a bioassay method to detect PPAR{alpha} ligands based on the ligand-receptor interaction on microplate. PPAR{alpha}, which formed heterodimers with retinoid X receptor-{alpha} (RXR{alpha}), were activated by PPAR{alpha} ligands to form ligands-PPAR{alpha}-RXR{alpha} complexes. Then the complexes were transferred into a microplate and captured via monoclonal anti-PPAR{alpha} antibody. The PPAR{alpha} responsive elements (PPRE) modified-gold nanoparticle probes were captured by the ligand-PPAR{alpha}-RXR{alpha} complexes immobilized on the microplate, and then could be quantified through measuring the optical density after silver enhancement. The results showed that PFOS was quantified with a linear range from 100 pM to 1 {mu}M and the detection limit was 10 pM. In addition to PFOS, PFOA and MEHP were also quantified within a proper range through the proposed bioassay. This bioassay was compared with that of liquid chromatography tandem-mass spectrometry (LC-MS) for water spiked samples with a significant correlation (r = 0.9893). This study provides a high-throughput detection

  15. Sabrewing: a lightweight architecture for combined floating-point and integer arithmetic

    NARCIS (Netherlands)

    Bruintjes, Tom M.; Walters, Karel H.G.; Gerez, Sabih H.; Molenkamp, Bert; Smit, Gerard J.M.

    2012-01-01

    In spite of the fact that floating-point arithmetic is costly in terms of silicon area, the joint design of hardware for floating-point and integer arithmetic is seldom considered. While components like multipliers and adders can potentially be shared, floating-point and integer units in contemporar

  16. Sabrewing: A lightweight architecture for combined floating-point and integer arithmetic

    NARCIS (Netherlands)

    Bruintjes, Tom; Walters, K.H.G.; Gerez, Sabih H.; Molenkamp, Egbert; Smit, Gerardus Johannes Maria

    In spite of the fact that floating-point arithmetic is costly in terms of silicon area, the joint design of hardware for floating-point and integer arithmetic is seldom considered. While components like multipliers and adders can potentially be shared, floating-point and integer units in

  17. Tethered float liquid level sensor

    Energy Technology Data Exchange (ETDEWEB)

    Daily, III, William Dean

    2016-09-06

    An apparatus for sensing the level of a liquid includes a float, a tether attached to the float, a pulley attached to the tether, a rotation sensor connected to the pulley that senses vertical movement of said float and senses the level of the liquid.

  18. Perceiving temporal regularity in music: the role of auditory event-related potentials (ERPs) in probing beat perception.

    Science.gov (United States)

    Honing, Henkjan; Bouwer, Fleur L; Háden, Gábor P

    2014-01-01

    The aim of this chapter is to give an overview of how the perception of a regular beat in music can be studied in humans adults, human newborns, and nonhuman primates using event-related brain potentials (ERPs). Next to a review of the recent literature on the perception of temporal regularity in music, we will discuss in how far ERPs, and especially the component called mismatch negativity (MMN), can be instrumental in probing beat perception. We conclude with a discussion on the pitfalls and prospects of using ERPs to probe the perception of a regular beat, in which we present possible constraints on stimulus design and discuss future perspectives.

  19. Determination of Contact Potential Difference by the Kelvin Probe (Part II) 2. Measurement System by Involving the Composite Bucking Voltage

    Science.gov (United States)

    Vilitis, O.; Rutkis, M.; Busenbergs, J.; Merkulovs, D.

    2016-12-01

    The present research is devoted to creation of a new low-cost miniaturised measurement system for determination of potential difference in real time and with high measurement resolution. Furthermore, using the electrode of the reference probe, Kelvin method leads to both an indirect measurement of electronic work function or contact potential of the sample and measurement of a surface potential for insulator type samples. The bucking voltage in this system is composite and comprises a periodically variable component. The necessary steps for development of signal processing and tracking are described in detail.

  20. Calibration in a potential water jet of a five-hole pressure probe with embedded sensors for unsteady flow measurement

    Science.gov (United States)

    Duquesne, P.; Desch"nes, C.; Iliescu, M.; Ciocan, G. D.

    2010-03-01

    Investigations of the flow behavior are currently carried out experimentally on models of hydraulic turbines. Quantities such as unsteady velocity can be acquired using PIV or LDV techniques, static wall pressure using steady or unsteady pressure transducers and wall shear stress using hot-film anemometry. More rarely acquired however, the unsteady total pressure at different locations in the flowstream would give more information on the flow dynamics and would be a key component for setting boundary conditions for CFD simulations. Following the example of classical Pitot tubes, which can only give averaged pressure values though, we have developed a five-hole pressure probe with embedded sensors that can measure unsteady values of total pressure, local flow velocity and direction. The probe head is designed to have a minimum impact on the flowstream, and the miniature sensors are placed in a cross configuration compared to the probe's support axis. This paper focuses on the utilization of normalized calibration coefficients and their use for unsteady values, and on the justification for using our cross sensor repartition. The calibration setup is presented briefly, including a water potential jet that requires the calculation of specific calibration coefficients. Different phenomena were observed during experimentation. Their impact on the accuracy of the probe is analyzed. The probe's operation range for this particular calibration setup is discussed. Finally, we focus on the influence of the sensors repartition on the tridimensional shape of the calibration coefficients, and we provide a way to calculate the first approximate solution for the reverse calculus while the sensors are not aligned with the probe's arm.

  1. Serial floating point formatter

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, R. D.; Penner, W. A.

    1985-11-12

    A floating point formatter for changing fixed point serial digital data, such as that received by a seismic data acquisition system, is disclosed wherein fixed point serial digital data is received and scaled to remove any bias added by preamplification. The scaled data is shifted a predetermined number of bits and a resulting exponent is calculated. The shifted data signal and corresponding exponent are combined and further scaled to permit stacking the data without exceeding the system capacity.

  2. Floating point coprocessor upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Weber, T.

    1987-04-01

    A method was developed to increase the throughput of the Hewlett Packard, 98635A floating point processor equipped, model 236C computer. The increase was carried out in three phases each with a clock and or chip change during the modification. Two programs were written to test the results and evaluate the increases in performance made to the computer. The first one shows reduction in processing times of 34.3%, while the other recorded 34.6%.

  3. Impact on floating membranes

    OpenAIRE

    Vandenberghe, Nicolas; Duchemin, Laurent

    2016-01-01

    When impacted by a rigid object, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. In the first place, a longitudinal wave front -- associated with in-plane deformation of the membrane and traveling at constant speed -- separates an outward stress free domain with a stretched but flat domain. Then, in the stretched domain a dispersive transverse wave travels at a wave speed that depends...

  4. Fiber optic probe enabled by surface-enhanced Raman scattering for early diagnosis of potential acute rejection of kidney transplant

    Science.gov (United States)

    Chi, Jingmao; Chen, Hui; Tolias, Peter; Du, Henry

    2014-06-01

    We have explored the use of a fiber-optic probe with surface-enhanced Raman scattering (SERS) sensing modality for early, noninvasive and, rapid diagnosis of potential renal acute rejection (AR) and other renal graft dysfunction of kidney transplant patients. Multimode silica optical fiber immobilized with colloidal Ag nanoparticles at the distal end was used for SERS measurements of as-collected urine samples at 632.8 nm excitation wavelength. All patients with abnormal renal graft function (3 AR episodes and 2 graft failure episodes) who were clinically diagnosed independently show common unique SERS spectral features in the urines collected just one day after transplant. SERS-based fiber-optic probe has excellent potential to be a bedside tool for early diagnosis of kidney transplant patients for timely medical intervention of patients at high risk of transplant dysfunction.

  5. Photoionization of NaK molecule with a double-well potential in femtosecond pump-probe pulse laser fields

    Institute of Scientific and Technical Information of China (English)

    Yu Jie; Wang Sen-Ming; Yuan Kai-Jun; Cong Shu-Lin

    2006-01-01

    The method of time-dependent quantum wave packet dynamics is used to calculate the femtosecond pump-probe photoelectron spectra and study the wave packet dynamic processes of the double-minimum potential state 61∑+ of NaK in intense laser fields. The evolutions of the wave packet and the photoelectron energy spectra with time and internuclear distance are described in detail. The wave packet dynamic information of the 61∑+ state can be extracted from the photoelectron energy spectra.

  6. Collapsing floating-point operations

    OpenAIRE

    Defour, David

    2004-01-01

    This paper addresses the issue of collapsing dependent floating-point operations. The presentation focuses on studying the dataflow graph of benchmark involving a large number of floating-point instructions. In particular, it focuses on the relevance of new floating-point operators performing two dependent operations which are similar to "fused multiply and add". Finally, this paper examines the implementation cost and critical path reduction from this strategy.

  7. FLOPAK: FLOATING POINT PROGRAMING PACKAGE,

    Science.gov (United States)

    FLOPAK is a Packard-Bell 250 Computer semi-automatic, floating - point programing system which may be operated simultaneously in either of two modes...250 floating - point system available which may be used in real-time control. The system was originally designed to solve a real-time communication problem....The first is a non-time optimized mode which may be used by inex perienced coders; the second mode is a high-speed, fully time-optimized floating

  8. WindWaveFloat (WWF): Final Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    Weinstein, Alla; Roddier, Dominique; Banister, Kevin

    2012-03-30

    Principle Power Inc. and National Renewable Energy Lab (NREL) have completed a contract to assess the technical and economic feasibility of integrating wave energy converters into the WindFloat, resulting in a new concept called the WindWaveFloat (WWF). The concentration of several devices on one platform could offer a potential for both economic and operational advantages. Wind and wave energy converters can share the electrical cable and power transfer equipment to transport the electricity to shore. Access to multiple generation devices could be simplified, resulting in cost saving at the operational level. Overall capital costs may also be reduced, provided that the design of the foundation can be adapted to multiple devices with minimum modifications. Finally, the WindWaveFloat confers the ability to increase energy production from individual floating support structures, potentially leading to a reduction in levelized energy costs, an increase in the overall capacity factor, and greater stability of the electrical power delivered to the grid. The research conducted under this grant investigated the integration of several wave energy device types into the WindFloat platform. Several of the resulting system designs demonstrated technical feasibility, but the size and design constraints of the wave energy converters (technical and economic) make the WindWaveFloat concept economically unfeasible at this time. Not enough additional generation could be produced to make the additional expense associated with wave energy conversion integration into the WindFloat worthwhile.

  9. Chronic neural probe for simultaneous recording of single-unit, multi-unit, and local field potential activity from multiple brain sites

    Science.gov (United States)

    Pothof, F.; Bonini, L.; Lanzilotto, M.; Livi, A.; Fogassi, L.; Orban, G. A.; Paul, O.; Ruther, P.

    2016-08-01

    Objective. Drug resistant focal epilepsy can be treated by resecting the epileptic focus requiring a precise focus localisation using stereoelectroencephalography (SEEG) probes. As commercial SEEG probes offer only a limited spatial resolution, probes of higher channel count and design freedom enabling the incorporation of macro and microelectrodes would help increasing spatial resolution and thus open new perspectives for investigating mechanisms underlying focal epilepsy and its treatment. This work describes a new fabrication process for SEEG probes with materials and dimensions similar to clinical probes enabling recording single neuron activity at high spatial resolution. Approach. Polyimide is used as a biocompatible flexible substrate into which platinum electrodes and leads are integrated with a minimal feature size of 5 μm. The polyimide foils are rolled into the cylindrical probe shape at a diameter of 0.8 mm. The resulting probe features match those of clinically approved devices. Tests in saline solution confirmed the probe stability and functionality. Probes were implanted into the brain of one monkey (Macaca mulatta), trained to perform different motor tasks. Suitable configurations including up to 128 electrode sites allow the recording of task-related neuronal signals. Main results. Probes with 32 and 64 electrode sites were implanted in the posterior parietal cortex. Local field potentials and multi-unit activity were recorded as early as one hour after implantation. Stable single-unit activity was achieved for up to 26 days after implantation of a 64-channel probe. All recorded signals showed modulation during task execution. Significance. With the novel probes it is possible to record stable biologically relevant data over a time span exceeding the usual time needed for epileptic focus localisation in human patients. This is the first time that single units are recorded along cylindrical polyimide probes chronically implanted 22 mm deep into the

  10. Study on Floating Properties and Stability of Air Floated Structures

    Institute of Scientific and Technical Information of China (English)

    别社安; 及春宁; 任增金; 李增志

    2002-01-01

    In this paper, the buoyancy, kinetic properties and stability of air floated structures have been studied by theoreticaland experimental methods. The equations for calculation of the buoyancy of the air floated buoy are derived according tothe Boyler law and the equilibrium equations of the air floated structure are established. Through simplification of the airfloated structure as a single freedom rigid body and spring system, the natural period of heaving and some kinetic proper-ties are discussed. In the stability analysis, the formulas for calculation of the meta centric height are presented. The the-oretical results are in good agreement with the data observed from the model test and prototype test. The air buoyancy de-crease coefficient presented in this paper has a large influence on the floating state, stability and dynamic properties of theair floated structure. The stability of the air floated structure can also be judged by the parameter of meta centric height,and calculations show that the air floated structure is less stable than the conventional float.

  11. Floating JMaRT

    CERN Document Server

    Bossard, Guillaume

    2014-01-01

    We define a new partially solvable system of equations that parametrises solutions to six-dimensional N=(1,0) ungauged supergravity coupled to tensor multiplets. We obtain this system by applying a series of dualities on the known floating brane system, imposing that it allows for the JMaRT solution. We construct an explicit multi-centre solution generalising the JMaRT solution, with an arbitrary number of additional BPS centres on a line. We describe explicitly the embedding of the JMaRT solution in this system in five dimensions.

  12. Parameters influencing plasma column potential in a reflex discharge

    Science.gov (United States)

    Liziakin, G. D.; Gavrikov, A. V.; Murzaev, Y. A.; Usmanov, R. A.; Smirnov, V. P.

    2016-12-01

    Distribution of electrostatic potential in direct current reflex discharge plasma has been studied experimentally. Measurements have been conducted by the single floating probe method. The influence of 0-0.2 T magnetic field, 1-200 mTorr pressure, 0-2 kV discharge voltage, and electrodes geometry on plasma column electrostatic potential was investigated. The possibility for the formation of a preset potential profile required for the realization of plasma separation of spent nuclear fuel was demonstrated.

  13. Monitoring of potentially toxic cyanobacteria using an online multi-probe in drinking water sources.

    Science.gov (United States)

    Zamyadi, A; McQuaid, N; Prévost, M; Dorner, S

    2012-02-01

    Toxic cyanobacteria threaten the water quality of drinking water sources across the globe. Two such water bodies in Canada (a reservoir on the Yamaska River and a bay of Lake Champlain in Québec) were monitored using a YSI 6600 V2-4 (YSI, Yellow Springs, Ohio, USA) submersible multi-probe measuring in vivo phycocyanin (PC) and chlorophyll-a (Chl-a) fluorescence, pH, dissolved oxygen, conductivity, temperature, and turbidity in parallel. The linearity of the in vivo fluorescence PC and Chl-a probe measurements were validated in the laboratory with Microcystis aeruginosa (r(2) = 0.96 and r(2) = 0.82 respectively). Under environmental conditions, in vivo PC fluorescence was strongly correlated with extracted PC (r = 0.79) while in vivo Chl-a fluorescence had a weaker relationship with extracted Chl-a (r = 0.23). Multiple regression analysis revealed significant correlations between extracted Chl-a, extracted PC and cyanobacterial biovolume and in vivo fluorescence parameters measured by the sensors (i.e. turbidity and pH). This information will help water authorities select the in vivo parameters that are the most useful indicators for monitoring cyanobacteria. Despite highly toxic cyanobacterial bloom development 10 m from the drinking water treatment plant's (DWTP) intake on several sampling dates, low in vivo PC fluorescence, cyanobacterial biovolume, and microcystin concentrations were detected in the plant's untreated water. The reservoir's hydrodynamics appear to have prevented the transport of toxins and cells into the DWTP which would have deteriorated the water quality. The multi-probe readings and toxin analyses provided critical evidence that the DWTP's untreated water was unaffected by the toxic cyanobacterial blooms present in its source water.

  14. Designs and applications for floating-hydro power systems in small streams

    Energy Technology Data Exchange (ETDEWEB)

    Rehder, J.B.

    1983-01-01

    The project focuses on an appropriate technology for small-scale hydro power: floating waterwheels and turbines. For background, relic and existing systems such as early floating mills, traditional Amish waterwheels, and micro-hydro systems are examined. In the design phase of the project, new designs for Floating Hydro Power Systems include: an analysis of floatation materials and systems; a floating undershot waterwheel design; a floating cylinder (fiberglass storage tank) design; a submerged tube design; and a design for a floating platform with submerged propellers. Finally, in the applications phase, stream flow data from East Tennessee streams are used in a discussion of the potential applications of floating hydro power systems in small streams.

  15. ANALYTICAL MODELS OF FLOATING BRIDGES SUBJECTED BY MOVING LOADS FOR DIFFERENT WATER DEPTHS

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jun; MIAO Guo-ping; LIU Jian-xun; SUN Wen-jun

    2008-01-01

    There are two types of floating bridge such as discrete-pontoon floating bridges and continuous-pontoon floating bridges.Analytical models of both floating bridges subjected by moving loads are presented to study the dynamic responses with hydrodynamic influence coefficients for different water depths. The beam theory and potential theory are introduced to produce themodels. The hydrodynamic coefficients and dynamic responses of bridges are evaluated by the boundary element method and by the Galerkin method of weighted residuals, respectively. Considering causal relationship between the frequencies of the oscillation of floating bridges and the added mass coefficients, an iteration method is introduced to compute hydrodynamic frequencies. The results indicate that water depth has little influence upon the dynamic responses of both types of floating bridges, so that the effect of water depth can be neglected during the course of designing floating bridges.

  16. Numerical study on aerodynamic damping of floating vertical axis wind turbines

    DEFF Research Database (Denmark)

    Cheng, Zhengshun; Aagaard Madsen, Helge; Gao, Zhen;

    2016-01-01

    Harvesting offshore wind energy resources using floating vertical axis wind turbines (VAWTs) has attracted an increasing interest in recent years. Due to its potential impact on fatigue damage, the aerodynamic damping should be considered in the preliminary design of a floating VAWT based...... on the frequency domain method. However, currently the study on aerodynamic damping of floating VAWTs is very limited. Due to the essential difference in aerodynamic load characteristics, the aerodynamic damping of a floating VAWT could be different from that of a floating horizontal axis wind turbine (HAWT......). In this study, the aerodynamic damping of floating VAWTs was studied in a fully coupled manner, and its influential factors and its effects on the motions, especially the pitch motion, were demonstrated. Three straight-bladed floating VAWTs with identical solidity and with a blade number varying from two...

  17. Floating shoulder” injuries

    OpenAIRE

    Heng, Kenneth

    2016-01-01

    Floating shoulder” is a rare injury complex resulting from high-energy blunt force trauma to the shoulder, resulting in scapulothoracic dissociation. It is commonly associated with catastrophic neurovascular injury. Two cases of motorcyclists with floating shoulder injuries are described.

  18. The effect of floating houses on water quality

    OpenAIRE

    Foka, E.; Rutten, M.; Boogaard, F. van de; de Graaf, R; Lima, R.; N. van de Giesen

    2015-01-01

    The need of an adaptive sustainable solution for the increased land scarcity, growing urbanization, climate change and flood risks resulted in the concept of the floating urbanization. In The Netherlands this new type of housing attracted the interest of local authorities, municipalities and water boards. Moreover, plans to incorporate floating houses in the urban planning have already been developed. However, the knowledge gap regarding the potential effect on the water quality halts the fur...

  19. Interpretation of fast measurements of plasma potential, temperature and density in SOL of ASDEX Upgrade

    DEFF Research Database (Denmark)

    Horacek, J.; Adamek, J.; Müller, H.W.

    2010-01-01

    This paper focuses on interpretation of fast (1 µs) and local (2–4 mm) measurements of plasma density, potential and electron temperature in the edge plasma of tokamak ASDEX Upgrade. Steady-state radial profiles demonstrate the credibility of the ball-pen probe. We demonstrate that floating poten...

  20. Floating microspheres: a review

    Directory of Open Access Journals (Sweden)

    Jagtap Yogesh Mukund

    2012-03-01

    Full Text Available Gastric emptying is a complex process, one that is highly variable and that makes in vivo performance of drug delivery systems uncertain. A controlled drug delivery system with prolonged residence time in the stomach can be of great practical importance for drugs with an absorption window in the upper small intestine. The main limitations are attributed to the inter- and intra-subject variability of gastro-intestinal (GI transit time and to the non-uniformity of drug absorption throughout the alimentary canal. Floating or hydrodynamically controlled drug delivery systems are useful in such applications. Various gastroretentive dosage forms are available, including tablets, capsules, pills, laminated films, floating microspheres, granules and powders. Floating microspheres have been gaining attention due to the uniform distribution of these multiple-unit dosage forms in the stomach, which results in more reproducible drug absorption and reduced risk of local irritation. Such systems have more advantages over the single-unit dosage forms. The present review briefly addresses the physiology of the gastric emptying process with respect to floating drug delivery systems. The purpose of this review is to bring together the recent literature with respect to the method of preparation, and various parameters affecting the performance and characterization of floating microspheres.O esvaziamento gástrico é um processo complexo, com elevada variabilidade e responsável pela incerteza do desempenho dos medicamentos in vivo. Dessa forma, os sistemas de liberação modificada de fármacos, com tempo de residência prolongado no estômago, em especial, considerando aqueles fármacos com janela de absorção na porção superior do intestino delgado, apresentam fundamental importância. As principais limitações relativas à absorção do fármaco são, no geral, atribuídas à variabilidade inter e intra-paciente do tempo de trânsito gastro-intestinal (GI e

  1. Identifying potential selective fluorescent probes for cancer-associated protein carbonic anhydrase IX using a computational approach.

    Science.gov (United States)

    Kamstra, Rhiannon L; Floriano, Wely B

    2014-11-01

    Carbonic anhydrase IX (CAIX) is a biomarker for tumor hypoxia. Fluorescent inhibitors of CAIX have been used to study hypoxic tumor cell lines. However, these inhibitor-based fluorescent probes may have a therapeutic effect that is not appropriate for monitoring treatment efficacy. In the search for novel fluorescent probes that are not based on known inhibitors, a database of 20,860 fluorescent compounds was virtually screened against CAIX using hierarchical virtual ligand screening (HierVLS). The screening database contained 14,862 compounds tagged with the ATTO680 fluorophore plus an additional 5998 intrinsically fluorescent compounds. Overall ranking of compounds to identify hit molecular probe candidates utilized a principal component analysis (PCA) approach. Four potential binding sites, including the catalytic site, were identified within the structure of the protein and targeted for virtual screening. Available sequence information for 23 carbonic anhydrase isoforms was used to prioritize the four sites based on the estimated "uniqueness" of each site in CAIX relative to the other isoforms. A database of 32 known inhibitors and 478 decoy compounds was used to validate the methodology. A receiver-operating characteristic (ROC) analysis using the first principal component (PC1) as predictive score for the validation database yielded an area under the curve (AUC) of 0.92. AUC is interpreted as the probability that a binder will have a better score than a non-binder. The use of first component analysis of binding energies for multiple sites is a novel approach for hit selection. The very high prediction power for this approach increases confidence in the outcome from the fluorescent library screening. Ten of the top scoring candidates for isoform-selective putative binding sites are suggested for future testing as fluorescent molecular probe candidates.

  2. Protocols for dynamically probing topological edge states and dimerization with fermionic atoms in optical potentials

    Science.gov (United States)

    Metcalf, Mekena; Lai, Chen-Yen; Wright, Kevin; Chien, Chih-Chun

    2017-06-01

    Topological behavior has been observed in quantum systems including ultracold atoms. However, background harmonic traps for cold atoms hinder the direct detection of topological edge states arising at the boundary because the distortion fuses the edge states into the bulk. We propose experimentally feasible protocols to probe localized edge states and dimerization of ultracold fermions. By confining cold atoms in a ring lattice and changing the boundary condition from periodic to open using an off-resonant laser sheet to cut open the ring, topological edge states can be generated. A lattice in a topological configuration can trap a single particle released at the edge as the system evolves in time. Alternatively, depleting an initially filled lattice away from the boundary reveals the occupied edge states. Signatures of dimerization in the presence of contact interactions can be found in selected correlations as the system boundary suddenly changes from periodic to open and exhibit memory effects of the initial state distinguishing different configurations.

  3. Nanoelectronics-biology frontier: From nanoscopic probes for action potential recording in live cells to three-dimensional cyborg tissues.

    Science.gov (United States)

    Duan, Xiaojie; Fu, Tian-Ming; Liu, Jia; Lieber, Charles M

    2013-08-01

    Semiconductor nanowires configured as the active channels of field-effect transistors (FETs) have been used as detectors for high-resolution electrical recording from single live cells, cell networks, tissues and organs. Extracellular measurements with substrate supported silicon nanowire (SiNW) FETs, which have projected active areas orders of magnitude smaller than conventional microfabricated multielectrode arrays (MEAs) and planar FETs, recorded action potential and field potential signals with high signal-to-noise ratio and temporal resolution from cultured neurons, cultured cardiomyocytes, acute brain slices and whole animal hearts. Measurements made with modulation-doped nanoscale active channel SiNW FETs demonstrate that signals recorded from cardiomyocytes are highly localized and have improved time resolution compared to larger planar detectors. In addition, several novel three-dimensional (3D) transistor probes, which were realized using advanced nanowire synthesis methods, have been implemented for intracellular recording. These novel probes include (i) flexible 3D kinked nanowire FETs, (ii) branched intracellular nanotube SiNW FETs, and (iii) active silicon nanotube FETs. Following phospholipid modification of the probes to mimic the cell membrane, the kinked nanowire, branched intracellular nanotube and active silicon nanotube FET probes recorded full-amplitude intracellular action potentials from spontaneously firing cardiomyocytes. Moreover, these probes demonstrated the capability of reversible, stable, and long-term intracellular recording, thus indicating the minimal invasiveness of the new nanoscale structures and suggesting biomimetic internalization via the phospholipid modification. Simultaneous, multi-site intracellular recording from both single cells and cell networks were also readily achieved by interfacing independently addressable nanoprobe devices with cells. Finally, electronic and biological systems have been seamlessly merged in 3D

  4. Nanoelectronics-biology frontier: From nanoscopic probes for action potential recording in live cells to three-dimensional cyborg tissues

    Science.gov (United States)

    Duan, Xiaojie; Fu, Tian-Ming; Liu, Jia; Lieber, Charles M.

    2013-01-01

    Summary Semiconductor nanowires configured as the active channels of field-effect transistors (FETs) have been used as detectors for high-resolution electrical recording from single live cells, cell networks, tissues and organs. Extracellular measurements with substrate supported silicon nanowire (SiNW) FETs, which have projected active areas orders of magnitude smaller than conventional microfabricated multielectrode arrays (MEAs) and planar FETs, recorded action potential and field potential signals with high signal-to-noise ratio and temporal resolution from cultured neurons, cultured cardiomyocytes, acute brain slices and whole animal hearts. Measurements made with modulation-doped nanoscale active channel SiNW FETs demonstrate that signals recorded from cardiomyocytes are highly localized and have improved time resolution compared to larger planar detectors. In addition, several novel three-dimensional (3D) transistor probes, which were realized using advanced nanowire synthesis methods, have been implemented for intracellular recording. These novel probes include (i) flexible 3D kinked nanowire FETs, (ii) branched intracellular nanotube SiNW FETs, and (iii) active silicon nanotube FETs. Following phospholipid modification of the probes to mimic the cell membrane, the kinked nanowire, branched intracellular nanotube and active silicon nanotube FET probes recorded full-amplitude intracellular action potentials from spontaneously firing cardiomyocytes. Moreover, these probes demonstrated the capability of reversible, stable, and long-term intracellular recording, thus indicating the minimal invasiveness of the new nanoscale structures and suggesting biomimetic internalization via the phospholipid modification. Simultaneous, multi-site intracellular recording from both single cells and cell networks were also readily achieved by interfacing independently addressable nanoprobe devices with cells. Finally, electronic and biological systems have been seamlessly

  5. A Method for Modeling of Floating Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Wang, Kai; Hansen, Martin Otto Laver; Moan, Torgeir

    2013-01-01

    . In order to assess the technical and economic feasibility of this novel concept, a comprehensive simulation tool for modeling of the floating vertical axis wind turbine is needed. This work presents the development of a coupled method for modeling of the dynamics of a floating vertical axis wind turbine......It is of interest to investigate the potential advantages of floating vertical axis wind turbine (FVAWT) due to its economical installation and maintenance. A novel 5MW vertical axis wind turbine concept with a Darrieus rotor mounted on a semi-submersible support structure is proposed in this paper....... This integrated dynamic model takes into account the wind inflow, aerodynamics, hydrodynamics, structural dynamics (wind turbine, floating platform and the mooring lines) and a generator control. This approach calculates dynamic equilibrium at each time step and takes account of the interaction between the rotor...

  6. Floating Silicon Method

    Energy Technology Data Exchange (ETDEWEB)

    Kellerman, Peter

    2013-12-21

    The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

  7. Impact on floating membranes

    CERN Document Server

    Vandenberghe, Nicolas

    2016-01-01

    When impacted by a rigid object, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. In the first place, a longitudinal wave front -- associated with in-plane deformation of the membrane and traveling at constant speed -- separates an outward stress free domain with a stretched but flat domain. Then, in the stretched domain a dispersive transverse wave travels at a wave speed that depends on the local stretching rate. We study the dynamics of this fluid-body system and we show that the wave dynamics is similar to the capillary waves that propagate at a liquid-gas interface but with a surface tension coefficient that depends on impact speed. We emphasize the role of the stretching in the membrane in the wave dynamics but also in the development of a buckling instability that give rise to radial wrinkles.

  8. Investigation of the surface potential of TiO2 (110) by frequency-modulation Kelvin probe force microscopy

    Science.gov (United States)

    Kou, Lili; Li, Yan Jun; Kamijyo, Takeshi; Naitoh, Yoshitaka; Sugawara, Yasuhiro

    2016-12-01

    We investigate the surface potential distribution on a TiO2 (110)-1 × 1 surface by Kelvin probe force microscopy (KPFM) and atom-dependent bias-distance spectroscopic mapping. The experimental results demonstrate that the local contact potential difference increases on twofold-coordinated oxygen sites, and decreases on OH defects and fivefold-coordinated Ti sites. We propose a qualitative model to explain the origin of the surface potential of TiO2 (110). We qualitatively calculate the surface potential induced by chemical potential and permanent surface dipole. The calculated results agree with our experimental ones. Therefore, we suggest that the surface potential of TiO2 (110) is dominated not only by the permanent surface dipole between the tip apex atom and surface, but also by the dipoles induced by the chemical interaction between the tip and sample. The KPFM technique demonstrate the possibility of investigation of the charge transfer phenomenon on TiO2 surface under gas conditions. It is useful for the elucidation of the mechanism of the catalytic reactions.

  9. Local surface potential of π-conjugated nanostructures by Kelvin probe force microscopy: effect of the sampling depth.

    Science.gov (United States)

    Liscio, Andrea; Palermo, Vincenzo; Fenwick, Oliver; Braun, Slawomir; Müllen, Klaus; Fahlman, Mats; Cacialli, Franco; Samorí, Paolo

    2011-03-01

    Kelvin probe force microscopy (KPFM) is usually applied to map the local surface potential of nanostructured materials at surfaces and interfaces. KPFM is commonly defined as a 'surface technique', even if this assumption is not fully justified. However, a quantification of the surface sensitivity of this technique is crucial to explore electrical properties at the nanoscale. Here a versatile 3D model is presented which provides a quantitative explanation of KPFM results, taking into account the vertical structure of the sample. The model is tested on nanostructured films obtained from two relevant semiconducting systems for field-effect transistor and solar cell applications showing different interfacial properties, i.e., poly(3-hexylthiophene) (P3HT) and perylene-bis-dicarboximide (PDI). These findings are especially important since they enable quantitative determination of the local surface potential of conjugated nanostructures, and thereby pave the way towards optimization of the electronic properties of nanoscale architectures for organic electronic applications.

  10. Polarization curve measurements combined with potential probe sensing for determining current density distribution in vanadium redox-flow batteries

    Science.gov (United States)

    Becker, Maik; Bredemeyer, Niels; Tenhumberg, Nils; Turek, Thomas

    2016-03-01

    Potential probes are applied to vanadium redox-flow batteries for determination of effective felt resistance and current density distribution. During the measurement of polarization curves in 100 cm2 cells with different carbon felt compression rates, alternating potential steps at cell voltages between 0.6 V and 2.0 V are applied. Polarization curves are recorded at different flow rates and states of charge of the battery. Increasing compression rates lead to lower effective felt resistances and a more uniform resistance distribution. Low flow rates at high or low state of charge result in non-linear current density distribution with high gradients, while high flow rates give rise to a nearly linear behavior.

  11. How does a probe inserted into the discharge influence the plasma structure?

    Science.gov (United States)

    Yordanov, D.; Lishev, St.; Shivarova, A.

    2016-05-01

    Shielding the bias applied to the probe by the sheath formed around it and determination of parameters of unperturbed plasmas are in the basis of the probe diagnostics. The results from a two-dimensional model of a discharge with a probe inserted in it show that the probe influences the spatial distribution of the plasma parameters in the entire discharge. The increase (although slight) in the electron temperature, due to the increased losses of charged particles on the additional wall in the discharge (mainly the probe holder), leads to redistribution of the plasma density and plasma potential, as shown by the results obtained at the floating potential of the probe. The deviations due to the bias applied to the probe tip are stronger in the ion saturation region of the probe characteristics. The pattern of the spatial redistribution of the plasma parameters advances together with the movement of the probe deeper in the discharge. Although probe sheaths and probe characteristics resulting from the model are shown, the study does not aim at discussions on the theories for determination of the plasma density from the ion saturation current. Regardless of the modifications in the plasma behavior in the entire discharge, the deviations of the plasma parameters at the position of the probe tip and, respectively, the uncertainty which should be added as an error when the accuracy of the probe diagnostics is estimated do not exceed 10%. Consequently, the electron density and temperature obtained, respectively, at the position of the plasma potential on the probe characteristics and from its transition region are in reasonable agreement with the results from the model of the discharge without a probe. Being in the scope of research on a source of negative hydrogen ions with the design of a matrix of small radius inductive discharges, the model is specified for a low-pressure hydrogen discharge sustained in a small-radius tube.

  12. Tetraphenylethene-Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds.

    Science.gov (United States)

    Chandrasekaran, Yogesh; Venkatramaiah, Nutalapati; Patil, Satish

    2016-04-04

    This study reports the synthesis and photophysical properties of a star-shaped, novel, fluoranthene-tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation-induced blue-shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature-dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6-trinitrophenol (PA) with high sensitivity and a high Stern-Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70% water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70% exhibit high Stern-Volmer constants (Ksv=79,998 and 51,120 M(-1), respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra-low-level detection of PA for real-time field analysis.

  13. Probing deconfinement in a chiral effective model with Polyakov loop at imaginary chemical potential

    CERN Document Server

    Morita, Kenji; Friman, Bengt; Redlich, Krzysztof

    2011-01-01

    The phase structure of the two-flavor Polyakov-loop extended Nambu-Jona-Lashinio model is explored at finite temperature and imaginary chemical potential with a particular emphasis on the confinement-deconfinement transition. We point out that the confined phase is characterized by a $\\cos3\\mu_I/T$ dependence of the chiral condensate on the imaginary chemical potential while in the deconfined phase this dependence is given by $\\cos\\mu_I/T$ and accompanied by a cusp structure induced by the Z(3) transition. We demonstrate that the phase structure of the model strongly depends on the choice of the Polyakov loop potential $\\mathcal{U}$. Furthermore, we find that by changing the four fermion coupling constant $G_s$, the location of the critical endpoint of the deconfinement transition can be moved into the real chemical potential region. We propose a new parameter characterizing the confinement-deconfinement transition.

  14. Lateral resolution and potential sensitivity in Kelvin probe force microscopy: Towards understanding of the sub-nanometer resolution

    Science.gov (United States)

    Krok, F.; Sajewicz, K.; Konior, J.; Goryl, M.; Piatkowski, P.; Szymonski, M.

    2008-06-01

    We report on high-resolution potential imaging of heterogeneous surfaces by means of Kelvin probe force microscopy, working in frequency modulation mode (FM-KPFM), performed in ultrahigh vacuum. To study the limits of potential and lateral resolutions in FM-KPFM, we have investigated clean surface of compound semiconductor InSb(001) and the same surface with some submonolayer coverages of KBr and Au. It was found that long- and short-range bias-dependent interactions, acting between the tip and the surface, could be detected and that both interactions contribute to the measured contact potential difference (CPD) signal. On the one hand, when only the long-range electrostatic interactions between the tip and the surface are active, the CPD map provides the distribution of the local surface potential on the imaged sample with the lateral resolution and the correctness of the measured values depending on the measurement conditions. For this case, the experimental findings were compared with the predictions of theoretical calculations based on a realistic model for the cantilever-sample geometry. On the other hand, when the short-range and bias-dependent interactions are detected, FM-KPFM provides even the sub-nanometer contrast in the CPD signal. In this situation, however, the measured CPD signal is not related to the sample surface potential but reflects the properties of the front tip atom-surface atom interactions.

  15. Difficulties in probing density dependent symmetry potential with the H BT interferometry

    Institute of Scientific and Technical Information of China (English)

    LI QingFeng; SHEN CaiWan

    2009-01-01

    Based on the updated UrQMD transport model,the effect of the symmetry potential energy on the two-nucleon HBT correlation is investigated with the help of the coalescence program for constructing clusters,and the CRAB analyzing program of the two-particle HBT correlation.An obvious nonlinear dependence of the neutron-proton (or neutron-neutron) HBT correlation function (Cnp,nn) at small relative momenta on the stiffness factor γ of the symmetry potential energy is found:when γ≤0.8,Cnp,nn Increases rapidly with increasing γ,while it starts to saturate if γ≤0.8.It is also found that both the symmetry potential energy at low densities and the conditions of constructing clusters at the late stage of the whole process influence the two-nucleon HBT correlation with the same power.

  16. Difficulties in probing density dependent symmetry potential with the HBT interferometry

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Based on the updated UrQMD transport model,the effect of the symmetry potential energy on the two-nucleon HBT correlation is investigated with the help of the coalescence program for constructing clusters,and the CRAB analyzing program of the two-particle HBT correlation.An obvious nonlinear dependence of the neutron-proton(or neutron-neutron) HBT correlation function(Cnp,nn) at small relative momenta on the stiffness factor γ of the symmetry potential energy is found:when γ 0.8,Cnp,nn increases rapidly with increasing γ,while it starts to saturate if γ 0.8.It is also found that both the symmetry potential energy at low densities and the conditions of constructing clusters at the late stage of the whole process influence the two-nucleon HBT correlation with the same power.

  17. NULL Convention Floating Point Multiplier

    Directory of Open Access Journals (Sweden)

    Anitha Juliette Albert

    2015-01-01

    Full Text Available Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

  18. NULL convention floating point multiplier.

    Science.gov (United States)

    Albert, Anitha Juliette; Ramachandran, Seshasayanan

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

  19. Electrically floating, near vertical incidence, skywave antenna

    Science.gov (United States)

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  20. NULL Convention Floating Point Multiplier

    OpenAIRE

    Anitha Juliette Albert; Seshasayanan Ramachandran

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to p...

  1. Large floating structures technological advances

    CERN Document Server

    Wang, BT

    2015-01-01

    This book surveys key projects that have seen the construction of large floating structures or have attained detailed conceptual designs. This compilation of key floating structures in a single volume captures the innovative features that mark the technological advances made in this field of engineering, and will provide a useful reference for ideas, analysis, design, and construction of these unique and emerging urban projects to offshore and marine engineers, urban planners, architects and students.

  2. FORMULATION AND EVALUATION OF GASTRO RETENTIVE FLOATING TABLETS OF GLICLAZIDE

    Directory of Open Access Journals (Sweden)

    Thakkar Hardik Kumar Rajeshbhai

    2011-04-01

    Full Text Available A gastro retentive floating drug delivery system containing gliclazide was prepared in the form of tablet and evaluated for its processing parameters and in vitro release behaviour. Gliclazide is a selective second-generation sulphonyl urea used in treatment of hyperglycemia and it absorbs rapidly and completely. However its absorption is erratic in diabetic patient due to its impaired gastric motility or gastric emptying. To overcome these drawbacks, the present investigation was to develop a gastro retentive floating tablets of gliclazide. Ten formulations containing retardant materials such as hydroxypropylmethylcellulose K4M and K15M, sodium bicarbonate was used as a gas generating agent to reduce floating lag time and other release promoters. Tablets remained buoyant over 12 hours in the release medium, and the amount of sodium bicarbonate found to be significant for not only to remaining buoyant without causing disintegration of the tablet, but also to release of the drug in the acidic medium. Final F6 optimized formulation released approximately 99% drug in 12 hours in vitro, while the floating lag time was 39 sec and tablet remained floatable throughout all studies. In vitro gastro retentive study of tablets gave successful results by floating in gastric content over a period of 24 hours. The results of the current study clearly indicate, a promising potential of the gliclazide floating system as an alternative to the conventional dosage form.

  3. Floating wind turbine system

    Science.gov (United States)

    Viterna, Larry A. (Inventor)

    2009-01-01

    A floating wind turbine system with a tower structure that includes at least one stability arm extending therefrom and that is anchored to the sea floor with a rotatable position retention device that facilitates deep water installations. Variable buoyancy for the wind turbine system is provided by buoyancy chambers that are integral to the tower itself as well as the stability arm. Pumps are included for adjusting the buoyancy as an aid in system transport, installation, repair and removal. The wind turbine rotor is located downwind of the tower structure to allow the wind turbine to follow the wind direction without an active yaw drive system. The support tower and stability arm structure is designed to balance tension in the tether with buoyancy, gravity and wind forces in such a way that the top of the support tower leans downwind, providing a large clearance between the support tower and the rotor blade tips. This large clearance facilitates the use of articulated rotor hubs to reduced damaging structural dynamic loads. Major components of the turbine can be assembled at the shore and transported to an offshore installation site.

  4. Impact on floating membranes

    Science.gov (United States)

    Vandenberghe, Nicolas; Duchemin, Laurent

    2016-05-01

    When impacted by a rigid body, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. First, a longitudinal wave front, associated with in-plane deformation of the membrane and traveling at constant speed, separates an outward stress-free domain from a stretched domain. Then, in the stretched domain a dispersive transverse wave travels at a speed that depends on the local stretching rate. The dynamics is found to be self-similar in time. Using this property, we show that the wave dynamics is similar to the capillary waves that propagate at a liquid-gas interface but with a surface tension coefficient that depends on impact speed. During wave propagation, we observe the development of a buckling instability that gives rise to radial wrinkles. We address the dynamics of this fluid-body system, including the rapid deceleration of an impactor of finite mass, an issue that may have applications in the domain of absorption of impact energy.

  5. Exploring metal detoxification and accumulation potential during vermicomposting of Tea factory coal ash: sequential extraction and fluorescence probe analysis

    Science.gov (United States)

    Goswami, Linee; Pratihar, Sanjay; Dasgupta, Suman; Bhattacharyya, Pradip; Mudoi, Pronab; Bora, Jayanta; Bhattacharya, Satya Sundar; Kim, Ki Hyun

    2016-07-01

    Metal contamination from coal ashes (CAs) is widely recognized as a significant environmental concern. To learn more about metal detoxification and accumulation potential of earthworm species, metal-rich tea factory coal ashes (TFCA) were fed to Eisenia fetida and Lampito mauritii by employing a fluorescent tag detection method. Fascinatingly, on feeding fluorescence probed Zn and Cd along with cow dung to Eisenia fetida, the detection of the gut-proteins with a molecular mass higher than 100 kDa was a distinct evidence of metal binding. Significant increases were observed in the content of humified organic C [humic acid (HAC) and fulvic acid C (FAC)] and degree of humification during vermicomposting. Concurrently, considerably large amount of toxic metals (Cr, Cd, Pb, and Zn) was transformed from exchangeable to recalcitrant (organic matter and mineral bound) fractions. Moreover, total metal concentrations were reduced with high removal efficiency upon vermicomposting.

  6. Exploring metal detoxification and accumulation potential during vermicomposting of Tea factory coal ash: sequential extraction and fluorescence probe analysis

    Science.gov (United States)

    Goswami, Linee; Pratihar, Sanjay; Dasgupta, Suman; Bhattacharyya, Pradip; Mudoi, Pronab; Bora, Jayanta; Bhattacharya, Satya Sundar; Kim, Ki Hyun

    2016-01-01

    Metal contamination from coal ashes (CAs) is widely recognized as a significant environmental concern. To learn more about metal detoxification and accumulation potential of earthworm species, metal-rich tea factory coal ashes (TFCA) were fed to Eisenia fetida and Lampito mauritii by employing a fluorescent tag detection method. Fascinatingly, on feeding fluorescence probed Zn and Cd along with cow dung to Eisenia fetida, the detection of the gut-proteins with a molecular mass higher than 100 kDa was a distinct evidence of metal binding. Significant increases were observed in the content of humified organic C [humic acid (HAC) and fulvic acid C (FAC)] and degree of humification during vermicomposting. Concurrently, considerably large amount of toxic metals (Cr, Cd, Pb, and Zn) was transformed from exchangeable to recalcitrant (organic matter and mineral bound) fractions. Moreover, total metal concentrations were reduced with high removal efficiency upon vermicomposting. PMID:27456167

  7. Optical probing of MgZnO/ZnO heterointerface confinement potential energy levels

    Energy Technology Data Exchange (ETDEWEB)

    Solovyev, V. V.; Van' kov, A. B.; Kukushkin, I. V. [Institute of Solid State Physics, RAS, Chernogolovka 142432 (Russian Federation); Max-Planck-Institut für Festkörperforschung, Heisenbergstrasse 1, D-70569 Stuttgart (Germany); Falson, J.; Kozuka, Y. [Department of Applied Physics and Quantum-Phase Electronics Center (QPEC), University of Tokyo, Tokyo 113-8656 (Japan); Zhang, D.; Smet, J. H. [Max-Planck-Institut für Festkörperforschung, Heisenbergstrasse 1, D-70569 Stuttgart (Germany); Maryenko, D. [RIKEN Center for Emergent Matter Science (CEMS), Wako 351-0198 (Japan); Tsukazaki, A. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); PRESTO, Japan Science and Technology Agency (JST), Tokyo 102-0075 (Japan); Kawasaki, M. [Department of Applied Physics and Quantum-Phase Electronics Center (QPEC), University of Tokyo, Tokyo 113-8656 (Japan); RIKEN Center for Emergent Matter Science (CEMS), Wako 351-0198 (Japan)

    2015-02-23

    Low-temperature photoluminescence and reflectance measurements were employed to study the optical transitions present in two-dimensional electron systems confined at Mg{sub x}Zn{sub 1–x}O/ZnO heterojunctions. Transitions involving A- and B-holes and electrons from the two lowest subbands formed within the confinement potential are detected. In the studied density range of 2.0–6.5 × 10{sup 11 }cm{sup −2}, the inter-subband splitting is measured and the first excited electron subband is shown to be empty of electrons.

  8. Probing the nature of phases across the phase transition at finite isospin chemical potential

    CERN Document Server

    Bali, Gunnar S; Gavai, Rajiv V; Mathur, N

    2016-01-01

    We compare the low eigenvalue spectra of the Overlap Dirac operator on two sets of configurations at $\\mu_I/\\mu_I^c$ = 0.5 and 1.5 generated with dynamical staggered fermions at these isospin chemical potential on $24^3 \\times 6$ lattices. We find very small changes in the number of zero modes and low lying modes which is in stark contrast with those across the corresponding finite temperature phases where one sees a drop across the phase transition. Possible consequences are discussed.

  9. Probing regenerative potential of Moringa oleifera aqueous extracts using In vitro cellular assays

    Directory of Open Access Journals (Sweden)

    Evangeline E Fernandes

    2016-01-01

    Full Text Available Background: Molecules stimulating regeneration and proliferation of cells are of significance in combating ailments caused due to tissue injury, inflammation, and degenerative disorders. Moringa oleifera is one of the most valued food plants having the profile of important nutrients and impressive range of medicinal uses. Objective: To evaluate the potential of M. oleifera aqueous leaf and flower extracts to promote the proliferation of cells and explore their effect on cancer cell lines for assessment of safety. Materials and Methods: Aqueous leaf and flower extracts of M. oleifera were investigated for effect on rat-derived primary fibroblast, mesenchymal stem cells (MSCs, and cancer cell lines using cell proliferation assay. They were also tested and compared for wound healing, angiogenesis, and hepatoprotective effect using in vitro assays. Results: Statistically significant increase in the proliferation of primary rat fibroblast, MSCs, and angiogenesis was observed after treatment with aqueous flower extract. The aqueous leaf extract determined a comparatively moderate increment in the proliferation of MSCs and angiogenesis. It however showed prominent cytotoxicity to cancer cell lines and a significant hepatoprotective effect. Conclusion: A very clear difference in response of the two extracts to different types of cells was detected in this study. The aqueous flower extract exhibited a higher potential to stimulate cell proliferation while not exerting the same effect on cancer cell lines. The leaf extract on the other hand, had a prominent antitumor and hepatoptotective effects.

  10. Probing Regenerative Potential of Moringa oleifera Aqueous Extracts Using In vitro Cellular Assays

    Science.gov (United States)

    Fernandes, Evangeline E.; Pulwale, Anubha V.; Patil, Gauri A.; Moghe, Alpana S.

    2016-01-01

    Background: Molecules stimulating regeneration and proliferation of cells are of significance in combating ailments caused due to tissue injury, inflammation, and degenerative disorders. Moringa oleifera is one of the most valued food plants having the profile of important nutrients and impressive range of medicinal uses. Objective: To evaluate the potential of M. oleifera aqueous leaf and flower extracts to promote the proliferation of cells and explore their effect on cancer cell lines for assessment of safety. Materials and Methods: Aqueous leaf and flower extracts of M. oleifera were investigated for effect on rat-derived primary fibroblast, mesenchymal stem cells (MSCs), and cancer cell lines using cell proliferation assay. They were also tested and compared for wound healing, angiogenesis, and hepatoprotective effect using in vitro assays. Results: Statistically significant increase in the proliferation of primary rat fibroblast, MSCs, and angiogenesis was observed after treatment with aqueous flower extract. The aqueous leaf extract determined a comparatively moderate increment in the proliferation of MSCs and angiogenesis. It however showed prominent cytotoxicity to cancer cell lines and a significant hepatoprotective effect. Conclusion: A very clear difference in response of the two extracts to different types of cells was detected in this study. The aqueous flower extract exhibited a higher potential to stimulate cell proliferation while not exerting the same effect on cancer cell lines. The leaf extract on the other hand, had a prominent antitumor and hepatoptotective effects. SUMMARY Moringa oleifera flower extract showed significant ability to promote proliferation of rat fibroblast and mesenchymal stem cells. The extract also had prominent angiogenic and hepatoprotective effects.The extract did not influence proliferation of cancer cell lines indicating its safety for human consumption and use in pharmaceuticals.The Moringa oleifera leaf extract

  11. Probing Regenerative Potential of Moringa oleifera Aqueous Extracts Using In vitro Cellular Assays.

    Science.gov (United States)

    Fernandes, Evangeline E; Pulwale, Anubha V; Patil, Gauri A; Moghe, Alpana S

    2016-01-01

    Molecules stimulating regeneration and proliferation of cells are of significance in combating ailments caused due to tissue injury, inflammation, and degenerative disorders. Moringa oleifera is one of the most valued food plants having the profile of important nutrients and impressive range of medicinal uses. To evaluate the potential of M. oleifera aqueous leaf and flower extracts to promote the proliferation of cells and explore their effect on cancer cell lines for assessment of safety. Aqueous leaf and flower extracts of M. oleifera were investigated for effect on rat-derived primary fibroblast, mesenchymal stem cells (MSCs), and cancer cell lines using cell proliferation assay. They were also tested and compared for wound healing, angiogenesis, and hepatoprotective effect using in vitro assays. Statistically significant increase in the proliferation of primary rat fibroblast, MSCs, and angiogenesis was observed after treatment with aqueous flower extract. The aqueous leaf extract determined a comparatively moderate increment in the proliferation of MSCs and angiogenesis. It however showed prominent cytotoxicity to cancer cell lines and a significant hepatoprotective effect. A very clear difference in response of the two extracts to different types of cells was detected in this study. The aqueous flower extract exhibited a higher potential to stimulate cell proliferation while not exerting the same effect on cancer cell lines. The leaf extract on the other hand, had a prominent antitumor and hepatoptotective effects. Moringa oleifera flower extract showed significant ability to promote proliferation of rat fibroblast and mesenchymal stem cells. The extract also had prominent angiogenic and hepatoprotective effects.The extract did not influence proliferation of cancer cell lines indicating its safety for human consumption and use in pharmaceuticals.The Moringa oleifera leaf extract showed relatively less potential to stimulate cells but had prominent cytotoxic

  12. Probing the gate--voltage-dependent surface potential of individual InAs nanowires using random telegraph signals.

    Science.gov (United States)

    Salfi, Joe; Paradiso, Nicola; Roddaro, Stefano; Heun, Stefan; Nair, Selvakumar V; Savelyev, Igor G; Blumin, Marina; Beltram, Fabio; Ruda, Harry E

    2011-03-22

    We report a novel method for probing the gate-voltage dependence of the surface potential of individual semiconductor nanowires. The statistics of electronic occupation of a single defect on the surface of the nanowire, determined from a random telegraph signal, is used as a measure for the local potential. The method is demonstrated for the case of one or two switching defects in indium arsenide (InAs) nanowire field effect transistors at temperatures T=25-77 K. Comparison with a self-consistent model shows that surface potential variation is retarded in the conducting regime due to screening by surface states with density Dss≈10(12) cm(-2) eV(-1). Temperature-dependent dynamics of electron capture and emission producing the random telegraph signals are also analyzed, and multiphonon emission is identified as the process responsible for capture and emission of electrons from the surface traps. Two defects studied in detail had capture activation energies of EB≈50 meV and EB≈110 meV and cross sections of σ∞≈3×10(-19) cm2 and σ∞≈2×10(-17) cm2, respectively. A lattice relaxation energy of Sℏω=187±15 meV was found for the first defect.

  13. Fast charge exchange ions in high power impulse magnetron sputtering of titanium as probes for the electrical potential

    Science.gov (United States)

    Breilmann, W.; Maszl, C.; von Keudell, A.

    2017-03-01

    High power impulse magnetron sputtering (HiPIMS) plasmas exhibit a high ionization fraction of the sputtered material and ions with high kinetic energies, which produce thin films with superior quality. These ion energy distribution functions (IEDF) contain energetic peaks, which are believed to be linked to a distinct electrical potential hump {{Δ }}{{{Φ }}}{{ionization}{{zone}}} inside rotating localized ionization zones, so called spokes, at target power densities above 1 kW cm‑2. Any direct measurement of this electrical potential structure is, however, very difficult due to the dynamic nature of the spokes and the very high local power density, which hampers the use of conventional emissive probes. Instead, we use a careful analysis of the IEDFs for singly and doubly charged titanium ions from a HiPIMS plasma at varying target power density. The energy peaks in the IEDFs measured at the substrate depend on the point of ionization and any charge exchange collisions on the path between ionization and impact at the substrate. Thereby, the IEDFs contain a convoluted information about the electrical potential structure inside the plasma. The analysis of these IEDFs reveal that higher ionization states originate at high target power densities from the central part of the plasma spoke, whereas singly charged ions originate from the perimeter of the plasma spoke. Consequently, we observe different absolute ion energies with the energy of Ti2+ being slightly higher than two times the energy of Ti+. Additional peaks are observed in the IEDFs of Ti+ originating from charge exchange reactions from Ti2+ and Ti3+ with titanium neutrals. Based on this analysis of the IEDFs, the structure of the electrical potential inside a spoke is inferred yielding {{Δ }}{{{Φ }}}{{ionization}{{zone}}} = 25 V above the plasma potential, irrespective of target power density.

  14. Gas and stellar dynamics in NGC 1068. Probing the galactic gravitational potential

    CERN Document Server

    Emsellem, E; Wozniak, H; Ferruit, P; Mundell, C G; Schinnerer, E; Emsellem, Eric; Fathi, Kambiz; Wozniak, Herve; Ferruit, Pierre; Mundell, Carole G.; Schinnerer, Eva

    2006-01-01

    We present Sauron 2D spectrography of the central 1.5 kpc of the nearby Sey2 galaxy NGC1068, encompassing the well-known NIR inner bar. We have successively disentangled the respective contributions of the ionized gas and stars, thus deriving their 2D distribution and kinematics. The [OIII] and Hbeta emission lines exhibit very different spatial distribution and kinematics, the latter following inner spiral arms with clumps associated with star formation. Strong inwards streaming motions are observed in both the Hbeta and [OIII] kinematics. The stellar kinematics also exhibit clear signatures of a non-axisymmetric tumbling potential, with a twist in both the velocity and h3 fields. We re-examined the long-slit data of Shapiro et al (2003) using pPXF: a strong decoupling of h3 is revealed, and the central decrease in h4 hinted in the Sauron data is confirmed. These data also suggest that NGC1068 is a good candidate for a so-called sigma-drop. We confirm the possible presence of two pattern speeds. We also exam...

  15. Detection of Matrix Crack Density of CFRP using an Electrical Potential Change Method with Multiple Probes

    Science.gov (United States)

    Todoroki, Akira; Omagari, Kazuomi

    Carbon Fiber Reinforced Plastic (CFRP) laminates are adopted for fuel tank structures of next generation space rockets or automobiles. Matrix cracks may cause fuel leak or trigger fatigue damage. A monitoring system of the matrix crack density is required. The authors have developed an electrical resistance change method for the monitoring of delamination cracks in CFRP laminates. Reinforcement fibers are used as a self-sensing system. In the present study, the electric potential method is adopted for matrix crack density monitoring. Finite element analysis (FEA) was performed to investigate the possibility of monitoring matrix crack density using multiple electrodes mounted on a single surface of a specimen. The FEA reveals the matrix crack density increases electrical resistance for a target segment between electrodes. Experimental confirmation was also performed using cross-ply laminates. Eight electrodes were mounted on a single surface of a specimen using silver paste after polishing of the specimen surface with sandpaper. The two outermost electrodes applied electrical current, and the inner electrodes measured electric voltage changes. The slope of electrical resistance during reloading is revealed to be an appropriate index for the detection of matrix crack density.

  16. Artisanal fishing net float loss and a proposal for a float design solution

    Directory of Open Access Journals (Sweden)

    Paulo de Tarso Chaves

    2016-03-01

    Full Text Available Abstract Plastic floats from fishing nets are commonly found washed up on beaches in southern Brazil. They are usually broken and show signs of having been repaired. Characteristics of floats and interviews with fishermen suggest two main causes of float loss. First, collisions between active gear, bottom trawl nets for shrimp, and passive gear, drift nets for fish, destroy nets and release fragments of them, including floats. Second, the difficulty with which floats are inserted on the float rope of the nets when they are used near the surface. Floats are inserted to replace damaged or lost floats, or they may be removed if it is desired that the nets be used in deeper waters. Floats may thus be poorly fixed to the cables and lost. Here a new float design that offers greater safety in use and for the replacement of floats is described and tested.

  17. The potential characteristics analysis of probing signal with the quadratic frequency modulation

    Directory of Open Access Journals (Sweden)

    O. D. Mrachkovsky

    2012-12-01

    Full Text Available Introduction: Complex signals with the button ambiguity function can provide the distance and speed of target independent estimation. The signal with the symmetrical linear frequency modulation has this property in the class of signal with frequency modulation. Problem statement: To show that in the class of signals frequency-shift is signal with button ambiguity function. Such signal is a signal with the quadratic frequency intra-modulation. The potential characteristics research of signal with the quadratic frequency intra-modulation: The signal with quadratic frequency modulation and its properties are considered, analytic form of signal and its spectrum are shown, figures of amplitude spectra of signal are drawn, and figures of ambiguity diagram, cross-correlation functions and response ambiguity function in strong and weak fields are shown. The comparison of the signal with the quadratic frequency intra-modulation and the signal with the symmetrical linear frequency modulation are shown. The result of research is that the ambiguity function form of a signal with the quadratic frequency intra-modulation comes nearer to button in the strong correlation field and it has X – for min the weak correlation field. The autocorrelation function of the signal with the quadratic frequency intra-modulation has some constant level which decreases with signal base increasing. It is revealed that autocorrelation function of the signal has no side lobes. It improves resolution capability of a weak signal against the strong signal. The pedestal level of the autocorrelation function of this signal is a little lower than pedestal level of the autocorrelation function of the signal with the symmetrical linear frequency modulation. Properties of section of cross-correlation function to two peaks and effect of these properties are considered. Signals with the quadratic frequency intra-modulation are expedient for using in the sonar of submarines, because in

  18. Floating Cities, Islands and States

    CERN Document Server

    Bolonkin, Alexander

    2008-01-01

    Many small countries are in need of additional territory. They build landfills and expensive artificial islands. The ocean covers 71 per cent of the Earth surface. Those countries (or persons of wealth) starting the early colonization of the ocean may obtain advantages through additional territory or creating their own independent state. An old idea is building a big ship. The best solution to this problem, however, is the provision of floating cities, islands, and states. The author idea is to use for floating cities, islands, and states a cheap floating platform created from a natural ice field taken from the Arctic or Antarctic oceans. These cheap platforms protected by air-film (bottom and sides) and a conventional insulating cover (top) and having a cooling system can exist for an unlimited time. They can be increased in number or size at any time, float in warm oceans, travel to different continents and countries, serve as artificial airports, harbors and other marine improvements, as well as floating c...

  19. Expanded polystyrene (EPS) floats for surveillance of Ochlerotatus japonicus.

    Science.gov (United States)

    Scott, Jamesina J; Crans, Wayne J

    2003-12-01

    Blocks of expanded polystyrene (EPS) were placed in a variety of habitats to investigate their potential as an egg-collection device for container-dwelling Aedes and Ochlerotatus species. Eggs from Ochlerotatus japonicus, Oc. triseriatus, Oc. hendersoni, and Aedes albopictus were collected with EPS floats. The float provides an inexpensive, low-maintenance alternative to the Centers for Disease Control ovitrap for sampling container-dwelling mosquito species that are important vectors of disease. Eggs collected on the floats have many potential applications, including use in routine population surveillance; detection of Oc. japonicus, Ae. albopictus, and other container-dwelling species in new areas; species distribution studies; natural transovarial transmission studies; ovipositional studies; collection of local field populations for insecticide resistance assays; assessment of adulticiding efficacy; and establishment of new laboratory colonies.

  20. Synthesis of fluorescent carbon dots via simple acid hydrolysis of bovine serum albumin and its potential as sensitive sensing probe for lead (II) ions.

    Science.gov (United States)

    Wee, Shui Shui; Ng, Yann Huey; Ng, Sing Muk

    2013-11-15

    Carbon dots have great potential to be utilised as an optical sensing probe due to its unique photoluminescence and less toxic properties. This work reports a simple and novel synthesis method of carbon dots via direct acid hydrolysis of bovine serum albumin protein in a one-pot approach. Optimisation of the important synthetic parameters has been performed which consists of temperature effect, acid to protein ratio and kinetics of reaction. Higher temperature has promoted better yield with shorter reaction time. The carbon dots obtained shows a strong emission at the wavelength of 400 nm with an optimum excitation of 305 nm. The potential of the carbon dots as optical sensing probe has been investigated on with different cations that are of environmental and health concern. The fluorescence of the carbon dots was significantly quenched particularly by lead (II) ions in a selective manner. Further analytical study has been performed to leverage the performance of the carbon dots for lead (II) ions sensing using the standard Stern-Volmer relationship. The sensing probe has a dynamic linear range up to 6.0 mM with a Stern-Volmer constant of 605.99 M(-1) and a limit of detection (LOD) of 5.05 μM. The probe performance was highly repeatable with a standard deviation below 3.0%. The probe suggested in this study demonstrates the potential of a more economical and greener approach that uses protein based carbon dots for sensing of heavy metal ions.

  1. [Free-Floating Intraocular Cysts].

    Science.gov (United States)

    Werner, Jens Ulrich; Lang, Gerhard K; Enders, Christian

    2017-05-03

    Background Free-floating intraocular cysts may be found in the anterior chamber (FZV) and the vitreous (FZG). The first description of a cyst was 150 years ago, and they are considered to be ocular rarities. Materials and Methods The actual knowledge about FZV and FZG is shown on the basis of two exemplary patients. Results and Discussion Patient 1 had a FZV as an incidental finding which had a smooth surface, a slight pigmentation and was translucent. The ultrasound biomicroscopy revealed an echo-free interior space. Without the patient's discomfort and missing treatment indication, a watch-and-wait strategy was chosen. Cysts of the iris can be classified as primary and secondary cysts. Primary cysts of the iris can arise from the stroma as the pigment epithelium wherein it is believed that FZV descend from the pigment epithelium. Secondary cysts and FZV can be generated by tumors, inflammation, epithelial ingrowth, the use of eye-drops or intraocular foreign bodies. Patient 2 showed marked myopic fundus changes and an FZG with a yellowish-greenish surface; the transparency was reduced and the surface was not pigmented. The ultrasound examination also revealed an echo-free interior space. Clinical controls were advised. Congenital and acquired causes are discussed for the formation of FZG. FZG could originate from the pigment epithelium of the iris, but there are conflicting study results. Trauma, inflammation and chorioretinal diseases are considered as a reason for acquired causes of FZG. The genesis, especially of FZG, is still unclear. For the treatment of patients with FZV and FZG, it is important to know the potential causes to be able to make a therapeutic decision. High quality photographic and sonographic documentation is needed in the watch-and-wait strategy. Georg Thieme Verlag KG Stuttgart · New York.

  2. Potential accessibility scores for hospital care in a province of Japan: GIS-based ecological study of the two-step floating catchment area method and the number of neighborhood hospitals.

    Science.gov (United States)

    Nakamura, Takashi; Nakamura, Akihisa; Mukuda, Kengo; Harada, Masanori; Kotani, Kazuhiko

    2017-06-26

    For achieving equity of the accessibility to primary healthcare, measuring potential geographical accessibility is essential. The provider-to-population ratio is the most frequently used measure. However, it is difficult to be used in closer region because it does not take into consideration the people and health services beyond its boundary. In order to overcome this problem, we measured the potential access to hospital, using both distance measures and the enhanced two-step floating catchment area (E2SFCA) method. The aim of this study was to compare the number of hospitals in the neighborhood and the E2SFCA score with regard to the amount and equity for access to hospitals. This descriptive study used publicly available data from 2010. The E2SFCA score and number of neighborhood hospitals were obtained from Tochigi province in Japan using a geographic information system. Dataset of four measures by each census tract was obtained. The measures were E2SFCA score, number of hospitals within the 5 km range, number of hospitals within the 10 km range, and number of hospitals within the 15 km range. Correlation and disparity analyses with the Lorenz curve and Gini coefficient were performed. The measures were obtained in a smaller area than municipality considering adjacent areas using a geographical approach. The E2SFCA score was 5.3 [3.2-7.3] hospitals/million (median [quantile range]), compared to 5.6 hospitals/million in total for the given district. The median number of hospitals within the 5 km, 10 km, and 15 km ranges were 1, 39, and 47, respectively. There was no hospital within the 5 km range in one third of the blocks. Both the number of hospitals within the 10 km range and those within the 15 km range were well correlated. Regional difference became smaller as the distance to count the number of hospitals increased. The gap between small number of hospitals and the high E2SFCA score indicated the location of community hospital in depopulated areas

  3. Integrated miniature fluorescent probe to leverage the sensing potential of ZnO quantum dots for the detection of copper (II) ions.

    Science.gov (United States)

    Ng, Sing Muk; Wong, Derrick Sing Nguong; Phung, Jane Hui Chiun; Chin, Suk Fun; Chua, Hong Siang

    2013-11-15

    Quantum dots are fluorescent semiconductor nanoparticles that can be utilised for sensing applications. This paper evaluates the ability to leverage their analytical potential using an integrated fluorescent sensing probe that is portable, cost effective and simple to handle. ZnO quantum dots were prepared using the simple sol-gel hydrolysis method at ambient conditions and found to be significantly and specifically quenched by copper (II) ions. This ZnO quantum dots system has been incorporated into an in-house developed miniature fluorescent probe for the detection of copper (II) ions in aqueous medium. The probe was developed using a low power handheld black light as excitation source and three photo-detectors as sensor. The sensing chamber placed between the light source and detectors was made of 4-sided clear quartz windows. The chamber was housed within a dark compartment to avoid stray light interference. The probe was operated using a microcontroller (Arduino Uno Revision 3) that has been programmed with the analytical response and the working algorithm of the electronics. The probe was sourced with a 12 V rechargeable battery pack and the analytical readouts were given directly using a LCD display panel. Analytical optimisations of the ZnO quantum dots system and the probe have been performed and further described. The probe was found to have a linear response range up to 0.45 mM (R(2)=0.9930) towards copper (II) ion with a limit of detection of 7.68×10(-7) M. The probe has high repeatable and reliable performance.

  4. Analysis of Responses of Floating Dual Pontoon Structure

    Institute of Scientific and Technical Information of China (English)

    WENG Wen-Kai; CHOU Chung-Ren

    2007-01-01

    A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure.The structure under consideration consisting of two pontoons,is connected by a rigid framework,and linked to the sea floor by a mooring system.The theoretical conception is based on potential theory with linear external forces,and applied to an arbitrarily shaped body and water depth.The discussion includes the influence of draft and space between pontoons on the responses of the floating structure.Finally,the validity of the method is adequately verified by experimental results.

  5. Floating plastic debris in the Central and Western Mediterranean Sea.

    Science.gov (United States)

    Ruiz-Orejón, Luis F; Sardá, Rafael; Ramis-Pujol, Juan

    2016-09-01

    In two sea voyages throughout the Mediterranean (2011 and 2013) that repeated the historical travels of Archduke Ludwig Salvator of Austria (1847-1915), 71 samples of floating plastic debris were obtained with a Manta trawl. Floating plastic was observed in all the sampled sites, with an average weight concentration of 579.3 g dw km(-2) (maximum value of 9298.2 g dw km(-2)) and an average particle concentration of 147,500 items km(-2) (the maximum concentration was 1,164,403 items km(-2)). The plastic size distribution showed microplastics (<5 mm) in all the samples. The most abundant particles had a surface area of approximately 1 mm(2) (the mesh size was 333 μm). The general estimate obtained was a total value of 1455 tons dw of floating plastic in the entire Mediterranean region, with various potential spatial accumulation areas.

  6. Evaporation mitigation by floating modular devices

    Science.gov (United States)

    Hassan, M. M.; Peirson, W. L.

    2016-05-01

    Prolonged periods of drought and consequent evaporation from open water bodies in arid parts of Australia continue to be a threat to water availability for agricultural production. Over many parts of Australia, the annual average evaporation exceeds the annual precipitation by more than 5 times. Given its significance, it is surprising that no evaporation mitigation technique has gained widespread adoption to date. High capital and maintenance costs of manufactured products are a significant barrier to implementation. The use of directly recycled clean plastic containers as floating modular devices to mitigate evaporation has been investigated for the first time. A six-month trial at an arid zone site in Australia of this potential cost effective solution has been undertaken. The experiment was performed using clean conventional drinking water bottles as floating modules on the open water surface of 240-L tanks with three varying degrees of covering (nil, 34% and 68%). A systematic reduction in evaporation is demonstrated during the whole study period that is approximately linearly proportional to the covered surface. These results provide a potential foundation for robust evaporation mitigation with the prospect of implementing a cost-optimal design.

  7. Potential use of buccal smears for rapid diagnosis of autosomal trisomy or chromosomal sex in newborn infants using DNA probes

    Energy Technology Data Exchange (ETDEWEB)

    Harris, C.; Clark, K.; Lazarski, K. [Univ. of Wisconsin, Madison, WI (United States); Wilkerson, C. [Univ. of Wisconsin Medical School, Madison, WI (United States); Meisner, L. [Univ. of Wisconsin, Madison, WI (United States)]|[Univ. of Wisconsin Medical School, Madison, WI (United States)

    1994-12-01

    Buccal smears from 3 women and 1 man were probed with alpha satellite DNA probes for chromosomes 8, 18, X, and Y. Buccal smears were also collected from an adolescent phenotypic female with uterine agenesis, as well as from newborn infants with suspected trisomy 18 and trisomy 21. The clinical cases were confirmed with conventional cytogenetic studies of peripheral lymphocytes. Overall probe efficiency at detecting expected chromosome number in interphase cells was found to be 71% {+-} 6.8%. Higher than expected n-1 signal numbers may be due to karyopyknotic intermediate epithelial cells present in all collected samples. Overall probe efficiency was found to be consistent using alpha satellite and cosmid probes, both of which accurately reflected the modal copy number of the target chromosomes. False trisomy was less than 1%. This study suggests DNA probes can be used in buccal smears for rapid diagnosis of trisomies and chromosomal sex in newborns, but because of high rates of false hydropoploid signals, probed buccal smear specimens may not be accurate at diagnosing mosaicism. 9 refs., 2 figs., 1 tab.

  8. Hydrodynamic responses of a thin floating disk to regular waves

    CERN Document Server

    Yiew, Lucas; Meylan, Michael; French, Ben; Thomas, Giles

    2015-01-01

    Laboratory wave basin measurements of the surge, heave and pitch of a floating plastic disk caused by regular incident waves are presented. The measurements are used to validate two theoretical models: one based on slope-sliding theory and the other on combined potential-flow and thin-plate theories.

  9. Langmuir probe Diagnostic for local parameter measurement in Magnetized Plasma using LabVIEW

    Directory of Open Access Journals (Sweden)

    Bijal Vara

    2014-03-01

    Full Text Available In recent years, plasma technology is used by Semiconductor, thin film industries for deposit layers, etching process and surface modification. So it is necessary to understanding internal plasma parameter. Langmuir probe is one of the simplest techniques which is used to measure wide range of plasma parameter like plasma potential, floating potential, electron temperature, electron energy distribution function (EEDF etc. Langmuir current voltage characteristic is obtained by varying bias voltage of the probe. LabVIEW is most powerful Microsoft window compatible software which is used to immediate data acquisition and analysis. In this paper describes analysis of Langmuir data using LabVIEW software which automatically measure I-V Plasma probe Characteristics and obtain EEDF of plasma.

  10. Floating Charge%Floating Charge--浮动抵押

    Institute of Scientific and Technical Information of China (English)

    鲍为民

    2004-01-01

    "Floating Charge"来源于英美法系,它将担保设立在公司的全部财产之上(该担保甚至可及于公司未来之财产),在结晶前公司对财产享有处分权.通过介绍Floating Charge的创立和发展变化,从设定和实施两个方面详细考察了该制度的具体内涵.最后通过和大陆法系财团抵押制度的对比,提出应在我国引进浮动抵押,完善企业担保制度.

  11. Solid-state probe based electrochemical aptasensor for cocaine: a potentially convenient, sensitive, repeatable, and integrated sensing platform for drugs.

    Science.gov (United States)

    Du, Yan; Chen, Chaogui; Yin, Jianyuan; Li, Bingling; Zhou, Ming; Dong, Shaojun; Wang, Erkang

    2010-02-15

    Aptamers, which are artificial oligonucleotides selected in vitro, have been employed to design novel biosensors (i.e., aptasensors). In this work, we first constructed a label-free electrochemical aptasensor introducing a probe immobilization technique by the use of a layer-by-layer (LBL) self-assembled multilayer with ferrocene-appended poly(ethyleneimine) (Fc-PEI) on an indium tin oxide (ITO) array electrode for detection of cocaine. The Fc-PEI and gold nanoparticles (AuNPs) were LBL assembled on the electrode surface via electrostatic interaction. Then, cocaine aptamer fragments, SH-C2, were covalently labeled onto the outermost AuNP layer. When the target cocaine and cocaine aptamer C1 were present simultaneously, the SH-C2 layer hybridized partly with C1 to bind the cocaine, which led to a decreased differential pulse voltammetry (DPV) signal of Fc-PEI. This DPV signal change could be used to sensitively detect cocaine with the lowest detectable concentration down to 0.1 microM and the detection range up to 38.8 microM, which falls in the the expected range for medical use of detecting drug abuse involving cocaine. Meanwhile, the sensor was specific to cocaine in complex biologic fluids such as human plasma, human saliva, etc. The sensing strategy had general applicability, and the detection of thrombin could also be realized, displayed a low detection limit, and exhibited worthiness to other analytes. The aptasensor based on the array electrode held promising potential for integration of the sensing ability in multianalysis for simultaneous detection.

  12. Numerical study on aerodynamic damping of floating vertical axis wind turbines

    Science.gov (United States)

    Cheng, Zhengshun; Aagaard Madsen, Helge; Gao, Zhen; Moan, Torgeir

    2016-09-01

    Harvesting offshore wind energy resources using floating vertical axis wind turbines (VAWTs) has attracted an increasing interest in recent years. Due to its potential impact on fatigue damage, the aerodynamic damping should be considered in the preliminary design of a floating VAWT based on the frequency domain method. However, currently the study on aerodynamic damping of floating VAWTs is very limited. Due to the essential difference in aerodynamic load characteristics, the aerodynamic damping of a floating VAWT could be different from that of a floating horizontal axis wind turbine (HAWT). In this study, the aerodynamic damping of floating VAWTs was studied in a fully coupled manner, and its influential factors and its effects on the motions, especially the pitch motion, were demonstrated. Three straight-bladed floating VAWTs with identical solidity and with a blade number varying from two to four were considered. The aerodynamic damping under steady and turbulent wind conditions were estimated using fully coupled aero-hydro-servo-elastic time domain simulations. It is found that the aerodynamic damping ratio of the considered floating VAWTs ranges from 1.8% to 5.3%. Moreover, the aerodynamic damping is almost independent of the rotor azimuth angle, and is to some extent sensitive to the blade number.

  13. Comparison of Chlorophyll and Photosynthesis Parameters of Floating and Attached Ulva prolifera

    Institute of Scientific and Technical Information of China (English)

    Apeng Lin; Songdong Shen; Guangce Wang; Qianqian Yi; Hongjin Qiao; Jianfeng Niu; Guanghua Pan

    2011-01-01

    (Chlorophyta,Ulvales)thalli struck the coastal area of Qingdao,China.To understand the present physiological conditions of the floating alga,in this work both laboratory and field inVestigations were conducted on the floating U.prolifera thalli in comparison with the attached U.prolifera thalli collected from the area.The floating thalli of three distinctively different colors and attached thalli at three different stages of sporangium formation process were characterized under a microscope,while their photosynthetic parameters were determined with chlorophyll fluorescence technology.On the other hand,the sporangium formation status of the floating U.prolifera thalli was surveyed both in the Iaboratory and in the field.Comparisons showed that both of the paired morphological characteristics and the paired physiological parameters of the floating and attached U.prolifera thalli were consistent.Furthermore,some spores were confirmed in the field and some motile particles were found within the floating thalli.These results suggest that the floating U.prolifera thalli with different colors could be at different stages of sporangium formation.However,our results also showed that the floating alga thalli have only a limited reproductive potential.This might limit the duration and the further geographic expansion of the green algal bloom.

  14. The Clouds That Float By

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    AS I walk toward the autumn of my life, I begin to realize that everything in the world seems to have moved in a cycle, like the four seasons that continue to change and renew outside my window. But I am still seated in front of my window, observing the floating clouds at the ends of the earth. Some of them float from the future, some from the past. They join at the head and the tail of the universe; it is hard to tell the dragon’s head from the dragon’s tail. Things are always like this—the beginnings and the endings are sometimes interchangeable; the things that you think have gone by, have gone far away or completely vanished will suddenly appear before you like old acquaintances. Perhaps it might be the second generation accompanied by the shadows of the first.

  15. A CMOS floating point multiplier

    Science.gov (United States)

    Uya, M.; Kaneko, K.; Yasui, J.

    1984-10-01

    This paper describes a 32-bit CMOS floating point multiplier. The chip can perform 32-bit floating point multiplication (based on the proposed IEEE Standard format) and 24-bit fixed point multiplication (two's complement format) in less than 78.7 and 71.1 ns, respectively, and the typical power dissipation is 195 mW at 10 million operations per second. High-speed multiplication techniques - a modified Booth's allgorithm, a carry save adder scheme, a high-speed CMOS full adder, and a modified carry select adder - are used to achieve the above high performance. The chip is designed for compatibility with 16-bit microcomputer systems, and is fabricated in 2 micron n-well CMOS technology; it contains about 23000 transistors of 5.75 x 5.67 sq mm in size.

  16. Floating VAWT wind farm concepts

    OpenAIRE

    Schmidt Paulsen, Uwe; Friis Pedersen, Troels; Vita, Luca

    2008-01-01

    The report contains proposals and descriptions of VAWTs of 200kW, 1MW, 5MW and 25MW sizes in terms of dimensions, weights, loads, and power production. Additionally a proposal of the use of each of these sizes in a concept description for a 100MW wind farm. Manufacture, transportation, installation, maintenance and operation of VAWTs are considered briefly. A summary on advantages and disadvantages of floating VAWTs is given.

  17. Thickness monitor for floated sludge

    Energy Technology Data Exchange (ETDEWEB)

    Ricketts, J.; Grecu, G.M.

    1989-10-31

    This patent describes apparatus for determining the thickness of a layer of aerated sludge floating on a layer of a heavier liquid in a tank. It comprises: a frame means which can be positioned to extend vertically into the tank; horizontally-extending indicator means supported by and moveable vertically with respect to a portion of the frame means extending vertically into the tank. The indicator means being selectively positionable at the highest level of sludge in the tank; horizontally-extending lower base means attached to the frame means at or near the bottom thereof; horizontally-extending upper base means attached to the frame means at or near the top thereof; and a line carrying a float means. The line being movable secured at the upper base means and the lower base means. The float means being floatable on the liquid and including a horizontally-extending portion presenting an upwardly directed generally planar surface, which surface will be parallel to the interface of the sludge and liquid.

  18. Partial Discharge Characteristics of Floating Potential Defect in SF6 Gas under Oscillating Lightning Impulse Voltage%振荡型雷电冲击电压下SF6气体中悬浮电位缺陷的局部放电特性研究

    Institute of Scientific and Technical Information of China (English)

    李军浩; 车斌; 林敏; 张亮; 高原; 杨景刚

    2014-01-01

    为模拟悬浮电位缺陷,设计了一种悬浮电位缺陷模型,并通过构建可产生符合IEC 60060-3标准要求的振荡型雷电冲击电压试验平台及相应的局部放电检测系统,对GIS中最常见的悬浮电位缺陷在振荡型雷电冲击电压下的局部放电特性进行研究,分析最大放电幅值、放电次数等随外加电压增加的变化规律。结果表明:在振荡型雷电冲击电压作用下,悬浮电位放电发生在外施电压的下降沿和上升沿处,随着外加电压的增加,放电最大幅值和放电次数均增加,且放电次数的增加幅度大于放电幅值的增加幅度。%To simulate floating potential defect, we designed a floating potential defect model. By setting up an experiment platform that can produce oscillating lightning impulse voltage that counld meet the re-quirements of IEC60060-3 and partial discharge measurement system, we studied the partial discharge characteristics of the common floating potential defect in SF6 gas under oscillating lightning impulse volt-age. The variation of discharge amplitude maximum and discharge number with the increase of voltage was studied. The results show that under the effect of oscillating lightning impulse voltage, the partial dis-charge of floating potential happen at the falling edge and rising edge of voltage. With the increase of voltage, the discharge amplitude maximum and discharge number increase, and the increase extent of the discharge number is greater than that of the discharge amplitude.

  19. Temporal and spatial distribution of floating objects in coastal waters of central-southern Chile and Patagonian fjords

    Science.gov (United States)

    Hinojosa, Iván A.; Rivadeneira, Marcelo M.; Thiel, Martin

    2011-03-01

    Floating objects are suggested to be the principal vector for the transport and dispersal of marine invertebrates with direct development as well as catalysts for carbon and nutrient recycling in accumulation areas. The first step in identifying the ecological relevance of floating objects in a specific area is to identify their spatio-temporal distribution. We evaluated the composition, abundance, distribution, and temporal variability of floating objects along the continental coast of central-southern Chile (33-42°S) and the Patagonian fjords (42-50°S) using ship surveys conducted in austral winter (July/August) and spring (November) of the years 2002-2005 and 2008. Potential sources of floating items were identified with the aid of publicly available databases and scientific reports. We found three main types of floating objects, namely floating marine debris (mainly plastic objects and Styrofoam), wood (trunks and branches), and floating kelps ( Macrocystis pyrifera and Durvillaea antarctica). Floating marine debris were abundant along most of the examined transects, with markedly lower abundances toward the southern fjord areas. Floating marine debris abundances generally corresponded to the distribution of human activities, and were highest in the Interior Sea of Chiloé, where aquaculture activities are intense. Floating wood appeared sporadically in the study area, often close to the main rivers. In accordance with seasonal river run-off, wood was more abundant along the continental coast in winter (rainy season) and in the Patagonian fjords during the spring surveys (snow melt). Densities of the two floating kelp species were similar along the continental coast, without a clear seasonal pattern. M. pyrifera densities increased towards the south, peaking in the Patagonian fjords, where it was dominant over D. antarctica. Densities of M. pyrifera in the Patagonian fjords were highest in spring. Correlation analyses between the abundances of floating

  20. Mobile Probing and Probes

    DEFF Research Database (Denmark)

    2013-01-01

    Mobile probing is a method, developed for learning about digital work situations, as an approach to discover new grounds. The method can be used when there is a need to know more about users and their work with certain tasks, but where users at the same time are distributed (in time and space......). Mobile probing was inspired by the cultural probe method, and was influenced by qualitative interview and inquiry approaches. The method has been used in two subsequent projects, involving school children (young adults at 15-17 years old) and employees (adults) in a consultancy company. Findings point...... to mobile probing being a flexible method for uncovering the unknowns, as a way of getting rich data to the analysis and design phases. On the other hand it is difficult to engage users to give in depth explanations, which seem easier in synchronous dialogs (whether online or face2face). The development...

  1. Mobile Probing and Probes

    DEFF Research Database (Denmark)

    2012-01-01

    Mobile probing is a method, which has been developed for learning about digital work situations, as an approach to discover new grounds. The method can be used when there is a need to know more about users and their work with certain tasks, but where users at the same time are distributed (in time...... and space). Mobile probing was inspired by the cultural probe method, and was influenced by qualitative interview and inquiry approaches. The method has been used in two subsequent projects, involving school children (young adults at 15-17 years old) and employees (adults) in a consultancy company. Findings...... point to mobile probing being a flexible method for uncovering the unknowns, as a way of getting rich data to the analysis and design phases. On the other hand it is difficult to engage users to give in depth explanations, which seem easier in synchronous dialogs (whether online or face2face...

  2. Mobile Probing and Probes

    DEFF Research Database (Denmark)

    2012-01-01

    Mobile probing is a method, which has been developed for learning about digital work situations, as an approach to discover new grounds. The method can be used when there is a need to know more about users and their work with certain tasks, but where users at the same time are distributed (in time...... and space). Mobile probing was inspired by the cultural probe method, and was influenced by qualitative interview and inquiry approaches. The method has been used in two subsequent projects, involving school children (young adults at 15-17 years old) and employees (adults) in a consultancy company. Findings...... point to mobile probing being a flexible method for uncovering the unknowns, as a way of getting rich data to the analysis and design phases. On the other hand it is difficult to engage users to give in depth explanations, which seem easier in synchronous dialogs (whether online or face2face...

  3. 14 CFR 27.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 27.753 Section...

  4. 14 CFR 29.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 29.753 Section...

  5. Differential Response of Floating and Submerged Leaves of Longleaf Pondweed to Silver Ions

    Directory of Open Access Journals (Sweden)

    Nisha Shabnam

    2017-06-01

    Full Text Available In this study, we have investigated variations in the potential of floating and submerged leaves of longleaf pondweed (Potamogeton nodosus to withstand silver ion (Ag+-toxicity. Both floating and submerged leaves changed clear colorless AgNO3 solutions to colloidal brown in the presence of light. Transmission electron microscopy revealed the presence of distinct crystalline Ag-nanoparticles (Ag-NPs in these brown solutions. Powder X-ray diffraction pattern showed that Ag-NPs were composed of Ag0 and Ag2O. Photosystem (PS II efficiency of leaves declined upon exposure to Ag+ with a significantly higher decline in the submerged leaves than in the floating leaves. Similarly, Ag+ treatment caused a significant reduction in the carboxylase activity of the ribulose bisphosphate carboxylase/oxygenase in leaves. The reduction in this carboxylase activity was significantly higher in the submerged than in the floating leaves. Ag+ treatment also resulted in a significant decline in the levels of non-enzymatic and enzymatic antioxidants; the decline was significantly lower in the floating than in submerged leaves. X-ray photoelectron spectroscopy revealed the presence of Ag2O in these leaves. Inductively coupled plasma mass spectrometry analysis revealed a three-fold higher Ag content in the submerged than in floating leaves. Our study demonstrates that floating leaves of longleaf pondweed have a superior potential to counter Ag+-toxicity compared with submerged leaves, which could be due to superior potential of floating leaves to reduce Ag+ to less/non-toxic Ag0/Ag2O-nanoparticles/nanocomplexes. We suggest that modulating the genotype of longleaf pondweed to bear higher proportion of floating leaves would help in cleaning fresh water bodies contaminated with ionic forms of heavy metals.

  6. Wave Diffraction on Arc-Shaped Floating Perforated Breakwaters

    Institute of Scientific and Technical Information of China (English)

    DUAN Jin-hui; CHENG Jian-sheng; WANG Jian-ping; WANG Jing-quan

    2012-01-01

    An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters.In the process of analysis,the floating breakwater is assumed to be rigid,thin,vertical,and immovable and located in water with constant depth.The fluid domain is divided into two regions by imaginary interface.The velocity potential in each region is expanded by eigenfunction in the context of linear theory.By satisfying continuity of pressure and normal velocity across the imaginary fluid interface,a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions.The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater.Numerical results,in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections,are presented for a range of wave and breakwater parameters.Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength,the draft and the porosity of the breakwater.

  7. Release kinetics of highly porous floating tablets containing cilostazol.

    Science.gov (United States)

    Hwang, Kyu-Mok; Cho, Cheol-Hee; Tung, Nguyen-Thach; Kim, Ju-Young; Rhee, Yun-Seok; Park, Eun-Seok

    2017-02-20

    This study focuses on developing a highly porous floating tablet containing cilostazol. The underlying release mechanism of cilostazol from porous and floating tablets in dissolution media containing surfactants was investigated. The tablets were prepared by compressing granules and excipients with a sublimating agent, followed by sublimation under vacuum. The volatile material for the sublimating agent was chosen based on its flow properties using conventional methods as well as the twisted blade method. Resultant tablets could float immediately and had significantly higher tensile strengths than conventional tablets of similar porosities, holding a promising potential for increasing gastroretentive properties. Fitting the release profiles to the Korsmeyer-Peppas equation indicated Super Case II, Case II and non-Fickian kinetics, which implied that the release was affected by both floating behavior and matrix erosion. Abrupt changes in release kinetic parameters and erosional behaviors were found between the tablets containing different amounts of HPMC, indicating the existence of an excipient percolation threshold. Neither the surfactant in the media nor the porosity affected the dominant release mechanism, which was matrix erosion. Understanding the dominant release mechanism and percolation threshold allows for tuning the formulation to obtain various release profiles.

  8. Surface Tension Supported Floating of Heavy Objects: Why Elongated Bodies Float Better?

    CERN Document Server

    Bormashenko, Edward

    2015-01-01

    Floating of bodies heavier than the supporting liquid is discussed. Floating of cylindrical, ellipsoidal bodies and rectangular plates possessing lateral dimensions smaller than the capillary length is treated. It is demonstrated that more elongated bodies of a fixed volume are better supported by capillary forces, due to the increase in the perimeter of the triple line. Thus, floating of metallic needles obtains reasonable explanation.

  9. Influence of Model Simplifications Excitation Force in Surge for a Floating Foundation for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Andersen, Morten Thøtt; Hindhede, Dennis; Lauridsen, Jimmy

    2015-01-01

    , thereby, increases the difficulty in wave force determination due to limitations of the commonly used simplified methods. This paper deals with a physical model test of the hydrodynamic excitation force in surge on a fixed three-columned structure intended as a floating foundation for offshore wind......As offshore wind turbines move towards deeper and more distant sites, the concept of floating foundations is a potential technically and economically attractive alternative to the traditional fixed foundations. Unlike the well-studied monopile, the geometry of a floating foundation is complex and...

  10. Nanoparticle Sizing and Potential Quality Control of Sols Using a Unique Fluorescence Anisotropy Probe and 3D Contour Anisotropy Mapping.

    Science.gov (United States)

    Karolin, Jan; Geddes, Chris D

    2015-03-19

    Spectroscopic properties of the particle sizing fluorophore Dipole Blue are reported. The probe is cationic in nature, highly water-soluble, and strongly adheres to anionic silica surfaces by electrostatic interactions, as is demonstrated here by Ludox SM 30. The probe has a distinct absorbance band centered at 320 nm, and the fluorescence emission band is Stokes-shifted 100 nm with a peak centered at 426 nm. From time-correlated single-photon counting experiments, the fluorescence lifetime was found to be adequately described by a three-exponential decay model with an intensity-averaged lifetime of 15.6 ns. Perrin graph analysis of steady-state anisotropy shows the presence of silica particles with a radius of (5.44 ± 0.16) nm, which, considering the distribution of particle sizes, is in reasonable agreement with 3.5 nm found from dynamic light scattering experiments.

  11. 14 CFR 27.751 - Main float buoyancy.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  12. 14 CFR 29.751 - Main float buoyancy.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  13. Hydroelasticity of a Floating Plate

    DEFF Research Database (Denmark)

    Chen, X.; Jensen, Jørgen Juncher; Cui, W.

    2003-01-01

    The membrane forces are included in the hydroelastic analysis of a floating plate undergoing large vertical deflections in regular monochromatic multidirectional waves. The first-order vertical displacements induced by the linear wave exciting forces are calculated by the mode expansion method...... in the frequency domain. The second-order vertical displacements induced by the membrane forces are calculated by the von Karman plate theory. The results show that the membrane contribution both in terms of the axial stresses and the effect on the bending stresses can be important...

  14. Floating patella associated with lymphoedema

    Science.gov (United States)

    Vun, Shen Hwa; Bayam, Levent; Drampalos, Efstathios; Jesry, Mohammed; Fadel, George

    2015-01-01

    Ipsilateral injury of more than one component of the knee extensor apparatus is rare. It is mostly associated with previous trauma, surgery, immunosuppression therapy and systemic disease. We present the first documented case of a spontaneous bifocal disruption of the knee extensor apparatus (i.e. floating patella) associated with lymphoedema. This case highlights the importance of considering lymphoedema as another risk factor for rupture of the knee extensor apparatus. It also highlights the importance of assessing all components of the knee extensor apparatus in patients presenting with acute knee injuries. PMID:25802253

  15. Discrete Element Modelling of Floating Debris

    Science.gov (United States)

    Mahaffey, Samantha; Liang, Qiuhua; Parkin, Geoff; Large, Andy; Rouainia, Mohamed

    2016-04-01

    Flash flooding is characterised by high velocity flows which impact vulnerable catchments with little warning time and as such, result in complex flow dynamics which are difficult to replicate through modelling. The impacts of flash flooding can be made yet more severe by the transport of both natural and anthropogenic debris, ranging from tree trunks to vehicles, wheelie bins and even storage containers, the effects of which have been clearly evident during recent UK flooding. This cargo of debris can have wide reaching effects and result in actual flood impacts which diverge from those predicted. A build-up of debris may lead to partial channel blockage and potential flow rerouting through urban centres. Build-up at bridges and river structures also leads to increased hydraulic loading which may result in damage and possible structural failure. Predicting the impacts of debris transport; however, is difficult as conventional hydrodynamic modelling schemes do not intrinsically include floating debris within their calculations. Subsequently a new tool has been developed using an emerging approach, which incorporates debris transport through the coupling of two existing modelling techniques. A 1D hydrodynamic modelling scheme has here been coupled with a 2D discrete element scheme to form a new modelling tool which predicts the motion and flow-interaction of floating debris. Hydraulic forces arising from flow around the object are applied to instigate its motion. Likewise, an equivalent opposing force is applied to fluid cells, enabling backwater effects to be simulated. Shock capturing capabilities make the tool applicable to predicting the complex flow dynamics associated with flash flooding. The modelling scheme has been applied to experimental case studies where cylindrical wooden dowels are transported by a dam-break wave. These case studies enable validation of the tool's shock capturing capabilities and the coupling technique applied between the two numerical

  16. Increased binding of a hydrophobic, photolabile probe to Escherichia coli inversely correlates to membrane potential but not adenosine 5'-triphosphate levels.

    Science.gov (United States)

    Wolf, M K; Konisky, J

    1981-01-01

    We describe conditions for a quantitative determination of azidopyrene binding to Escherichia coli cells. In addition, we define conditions whereby irradiation of azidopyrene in the presence of cells leads to irreversible association of probe with cells. This is presumably due to the light-dependent generation of reactive nitrenes and subsequent incorporation of nitrenopyrene moieties into cellular components. These methods allowed us to determine that the amount of azidopyrene bound to cells was inversely correlated with the magnitude of the cellular membrane potential, but was not correlated with high or low adenosine 5-triphosphate levels per se. Cells bound more azidopyrene if the delta psi was low. Cell-bound azidopyrene was found to be entirely associated with the inner and outer membrane. We suggest that the decreased association of hydrophobic probes upon energization of whole cells reflects a rapid transition in structural properties of the cell envelope. PMID:7007317

  17. Local current transport and surface potential of photovoltaic Cu(In,Ga)Se2 thin films probed by multi-scale imaging methods

    Science.gov (United States)

    Jeong, A. R.; Kim, G. Y.; Jo, W.; Nam, D. H.; Cheong, H.; Jo, H. J.; Kim, D.-H.; Sung, S. J.; Kang, J. K.; Lee, D. H.

    2013-03-01

    Microstructural alteration induces non-uniform device characteristics in polycrystalline thin films. In thin-film solar cells based on Cu(In,Ga)Se2 (CIGS), local electrical properties are investigated by Raman scattering spectroscopic imaging and scanning probe microscopic tools. Localized and uneven intensity of phonon modes, which represent different orientation and phases, elucidate the nature of non-uniformity of crystallinity, composition and defects in the films. Surface potential mapping at nanoscale is performed by Kelvin probe force microscopy, showing ˜40 mV of band-bending at the grain boundaries. Externally biased-current mapping, which is obtained by conductive atomic force microscopy, shows preferred current path in the films. Invited talk at the 6th International Workshop on Advanced Materials Science and Nanotechnology IWAMSN2012, 30 October-2 November 2012, Ha Long, Vietnam.

  18. Summary of 2006 to 2010 FPMU Measurements of International Space Station Frame Potential Variations

    Science.gov (United States)

    Minow, Joseph I.; Wright, Kenneth H., Jr.; Chandler, Michael O.; Coffey, Victoria N.; Craven, Paul D.; Schneider, Todd A.; Parker, Linda N.; Ferguson, Dale C.; Koontz, Steve L.; Alred, John W.

    2010-01-01

    Electric potential variations on the International Space Station (ISS) structure in low Earth orbit are dominated by contributions from interactions of the United States (US) 160 volt solar arrays with the relatively high density, low temperature plasma environment and inductive potentials generated by motion of the large vehicle across the Earth?s magnetic field. The Floating Potential Measurement Unit (FPMU) instrument suite comprising two Langmuir probes, a plasma impedance probe, and a floating potential probe was deployed in August 2006 for use in characterizing variations in ISS potential, the state of the ionosphere along the ISS orbit and its effect on ISS charging, evaluating effects of payloads and visiting vehicles, and for supporting ISS plasma hazard assessments. This presentation summarizes observations of ISS frame potential variations obtained from the FPMU from deployment in 2006 through the current time. We first describe ISS potential variations due to current collection by solar arrays in the day time sector of the orbit including eclipse exit and entry charging events, potential variations due to plasma environment variations in the equatorial anomaly, and visiting vehicles docked to the ISS structure. Next, we discuss potential variations due to inductive electric fields generated by motion of the vehicle across the geomagnetic field and the effects of external electric fields in the ionosphere. Examples of night time potential variations at high latitudes and their possible relationship to auroral charging are described and, finally, we demonstrate effects on the ISS potential due to European Space Agency and US plasma contactor devices.

  19. Mobile Probing and Probes

    DEFF Research Database (Denmark)

    2013-01-01

    to mobile probing being a flexible method for uncovering the unknowns, as a way of getting rich data to the analysis and design phases. On the other hand it is difficult to engage users to give in depth explanations, which seem easier in synchronous dialogs (whether online or face2face). The development...

  20. Floating liquid bridge charge dynamics

    Science.gov (United States)

    Teschke, Omar; Soares, David Mendez; Gomes, Whyllerson Evaristo; Valente Filho, Juracyr Ferraz

    2016-01-01

    The interaction of liquid with electric fields is investigated in a configuration where up to 13 kV are applied between electrodes resulting in a 106 V/m electric field in the capillaries and where there is the formation of a free-standing fluid bridge in the interelectrode gap. The Mott-Gurney equation was fitted to the measured ionization current vs applied voltage curve which indicates that the ionization rate at the high-voltage anode electrode dimethylsulfoxide (DMSO) interface and space charging in the interelectrode gap determine the floating liquid bridge current for a given cathode-to-anode voltage. Space charge effects were measured in the cathode becker and also at the liquid bridge since the ionized charges at the anode migrate to the bridge outer surface and decrease the interfacial tension from 43 mJ/m2 to 29 mJ/m2. Two distinct structural regions then form the bridge, a charged plastic (bulk modulus ˜100 MPa) conducting outer layer with a surface conductivity of ˜10-9 Ω-1, which shapes and supports the floating fluid structure, and an inner liquid cylinder, where DMSO molecules flow.

  1. Floating point numbers are real numbers

    OpenAIRE

    Mascarenhas, Walter F.

    2016-01-01

    Floating point arithmetic allows us to use a finite machine, the digital computer, to reach conclusions about models based on continuous mathematics. In this article we work in the other direction, that is, we present examples in which continuous mathematics leads to sharp, simple and new results about the evaluation of sums, square roots and dot products in floating point arithmetic.

  2. Towards sensible floating-point arithmetic

    Energy Technology Data Exchange (ETDEWEB)

    Cody, W.J.

    1980-01-01

    Efforts to promote the development of high-quality transportable numerical software show that few, if any, of the floating-point arithmetic systems in existing computers are completely satisfactory for serious numerical computation. Examination of the defects in these systems leads to specifications for a sensible floating-point system from a numerical analyst's viewpoint. 1 table.

  3. associated injuries and complications in floating knee management

    African Journals Online (AJOL)

    Traumatology Surgery, Cotonou Teaching Hospital, Republic of Bénin. Correspondence to: Dr. ... Keywords: Associated injuries, complications, Floating knee, Management .... floating knee: epidemiology, prognostic indicators. & outcome ...

  4. Floating plant dominance as a stable state

    Science.gov (United States)

    Scheffer, Marten; Szabó, Sándor; Gragnani, Alessandra; van Nes, Egbert H.; Rinaldi, Sergio; Kautsky, Nils; Norberg, Jon; Roijackers, Rudi M. M.; Franken, Rob J. M.

    2003-01-01

    Invasion by mats of free-floating plants is among the most important threats to the functioning and biodiversity of freshwater ecosystems ranging from temperate ponds and ditches to tropical lakes. Dark, anoxic conditions under thick floating-plant cover leave little opportunity for animal or plant life, and they can have large negative impacts on fisheries and navigation in tropical lakes. Here, we demonstrate that floating-plant dominance can be a self-stabilizing ecosystem state, which may explain its notorious persistence in many situations. Our results, based on experiments, field data, and models, represent evidence for alternative domains of attraction in ecosystems. An implication of our findings is that nutrient enrichment reduces the resilience of freshwater systems against a shift to floating-plant dominance. On the other hand, our results also suggest that a single drastic harvest of floating plants can induce a permanent shift to an alternative state dominated by rooted, submerged growth forms. PMID:12634429

  5. Nanoscale quantitative measurement of the potential of charged nanostructures by electrostatic and Kelvin probe force microscopy: unraveling electronic processes in complex materials.

    Science.gov (United States)

    Liscio, Andrea; Palermo, Vincenzo; Samorì, Paolo

    2010-04-20

    In microelectronics and biology, many fundamental processes involve the exchange of charges between small objects, such as nanocrystals in photovoltaic blends or individual proteins in photosynthetic reactions. Because these nanoscale electronic processes strongly depend on the structure of the electroactive assemblies, a detailed understanding of these phenomena requires unraveling the relationship between the structure of the nano-object and its electronic function. Because of the fragility of the structures involved and the dynamic variance of the electric potential of each nanostructure during the charge generation and transport processes, understanding this structure-function relationship represents a great challenge. This Account discusses how our group and others have exploited scanning probe microscopy based approaches beyond imaging, particularly Kelvin probe force microscopy (KPFM), to map the potential of different nanostructures with a spatial and voltage resolution of a few nanometers and millivolts, respectively. We describe in detail how these techniques can provide researchers several types of chemical information. First, KPFM allows researchers to visualize the photogeneration and splitting of several unitary charges between well-defined nano-objects having complementary electron-acceptor and -donor properties. In addition, this method maps charge injection and transport in thin layers of polycrystalline materials. Finally, KPFM can monitor the activity of immobilized chemical components of natural photosynthetic systems. In particular, researchers can use KPFM to measure the electric potential without physical contact between the tip and the nanostructure studied. These measurements exploit long-range electrostatic interactions between the scanning probe and the sample, which scale with the square of the probe-sample distance, d. While allowing minimal perturbation, these long-range interactions limit the resolution attainable in the measurement

  6. Ion sensitive probe measurement in the linear plasma device PSI-2

    Energy Technology Data Exchange (ETDEWEB)

    Ezumi, N. [Nagano National College of Technology, 716 Tokuma, Nagano 381-8550 (Japan)]. E-mail: ezumi@ec.nagano-nct.ac.jp; Kiss' ovski, Zh. [Faculty of Physics, Sofia University, Sofia 1164 (Bulgaria); Bohmeyer, W. [Max-Planck-Institut fuer Plasmaphysik, Bereich Plasmadiagnostik, Brook-Taylor-Str. 6, 12489 Berlin (Germany); Fussmann, G. [Max-Planck-Institut fuer Plasmaphysik, Bereich Plasmadiagnostik, Brook-Taylor-Str. 6, 12489 Berlin (Germany)

    2005-03-01

    The suitability of an ion sensitive probe (ISP) with respect to ion temperature (T {sub i}) measurements has been tested in the linear plasma generator in PSI-2. Current-voltage (I-V) characteristics were recorded as a function of two key parameters: shielding height (h) and potential differences between inner and outer electrodes (V {sub B}). It could be experimentally confirmed that the current within the electron saturation region is reduced with increasing h. Furthermore, the I-V characteristics change drastically when V {sub B} is varied. Radial profiles of the plasma parameters including plasma and floating potentials could be taken. Whereas the T {sub i} values determined by ISP in the plasma core region agree fairly with those obtained by using a local optical probe, severe interpretation difficulties occurred for the outer regions.

  7. Multiprocessing system for performing floating point arithmetic operations

    Energy Technology Data Exchange (ETDEWEB)

    Nguyenphu, M.; Thatcher, L.E.

    1990-10-02

    This patent describes a data processing system. It comprises: a fixed point arithmetic processor means for performing fixed point arithmetic operations and including control means for decoding a floating point arithmetic instruction specifying a floating point arithmetic operation, and an addressing means for computing addresses for floating point data for the floating point operation from a memory means. The memory means for storing data and including means for receiving the addresses from the fixed point arithmetic processor means and providing the floating point data to a floating point arithmetic processor means; and the floating point arithmetic processor means for performing floating point arithmetic operations and including control means for decoding the floating point instruction and performing the specified floating point arithmetic operation upon the floating point data from the memory means.

  8. Reducing float coal dust: Field evaluation of an inline auxiliary fan scrubber.

    Science.gov (United States)

    Patts, J R; Colinet, J F; Janisko, S J; Barone, T L; Patts, L D

    2016-12-01

    Controlling float coal dust in underground coal mines before dispersal into the general airstream can reduce the risk of mine explosions while potentially achieving a more effective and efficient use of rock dust. A prototype flooded-bed scrubber was evaluated for float coal dust control in the return of a continuous miner section. The scrubber was installed inline between the face ventilation tubing and an exhausting auxiliary fan. Airborne and deposited dust mass measurements were collected over three days at set distances from the fan exhaust to assess changes in float coal dust levels in the return due to operation of the scrubber. Mass-based measurements were collected on a per-cut basis and normalized on the basis of per ton mined by the continuous miner. The results show that average float coal dust levels measured under baseline conditions were reduced by more than 90 percent when operating the scrubber.

  9. Probing resonances in the Dirac equation with quadrupole-deformed potentials with the complex momentum representation method

    Science.gov (United States)

    Fang, Zhi; Shi, Min; Guo, Jian-You; Niu, Zhong-Ming; Liang, Haozhao; Zhang, Shi-Sheng

    2017-02-01

    Resonances play critical roles in the formation of many physical phenomena, and many techniques have been developed for the exploration of resonances. In a recent letter [Phys. Rev. Lett. 117, 062502 (2016), 10.1103/PhysRevLett.117.062502], we proposed a new method for probing single-particle resonances by solving the Dirac equation in complex momentum representation for spherical nuclei. Here, we develop the theoretical formalism of this method for deformed nuclei. We elaborate numerical details and calculate the bound and resonant states in 37Mg. The results are compared with those from the coordinate representation calculations with a satisfactory agreement. In particular, the present method can expose clearly the resonant states in a complex momentum plane and determine precisely the resonance parameters for not only narrow resonances but also broad resonances that were difficult to obtain before.

  10. A floating water bridge produces water with excess charge

    Science.gov (United States)

    Fuchs, Elmar C.; Sammer, Martina; Wexler, Adam D.; Kuntke, Philipp; Woisetschläger, Jakob

    2016-03-01

    Excess positive and negative Bjerrum-defect like charge (protonic and ‘aterprotonic’, from ancient Greek ἄ'τɛρ, ‘without’) in anolyte and catholyte of high voltage electrolysis of highly pure water was found during the so-called ‘floating water bridge’ experiment. The floating water bridge is a special case of an electrohydrodynamic liquid bridge and constitutes an intriguing phenomenon that occurs when a high potential difference (~kV cm-1) is applied between two beakers of water. To obtain such results impedance spectroscopy was used. This measurement technique allows the depiction and simulation of complex aqueous systems as simple electric circuits. In the present work we show that there is an additional small contribution from the difference in conductivity between anolyte and catholyte which cannot be measured with a conductivity meter, but is clearly visible in an impedance spectrum.

  11. Floating Marine Debris in waters of the Mexican Central Pacific.

    Science.gov (United States)

    Díaz-Torres, Evelyn R; Ortega-Ortiz, Christian D; Silva-Iñiguez, Lidia; Nene-Preciado, Alejandro; Orozco, Ernesto Torres

    2017-02-15

    The presence of marine debris has been reported recently in several oceans basins; there is very little information available for Mexican Pacific coasts, however. This research examined the composition, possible sources, distribution, and density of Floating Marine Debris (FMD) during nine research surveys conducted during 2010-2012 in the Mexican Central Pacific (MCP). Of 1820 floating objects recorded, 80% were plastic items. Sources of FMD were determined using key objects, which indicated that the most were related to the presence of the industrial harbor and of a growing fishing industry in the study area. Densities were relatively high, ranging from 40 to 2440objects/km(2); the highest densities were recorded in autumn. FMD were distributed near coastal regions, mainly in Jalisco, influenced by river outflow and surface currents. Our results seem to follow worldwide trends and highlight the need for further studies on potential ecological impacts within coastal waters of the MCP.

  12. Cross-section analysis of the Magnum-PSI plasma beam using a 2D multi-probe system

    Science.gov (United States)

    Costin, C.; Anita, V.; Ghiorghiu, F.; Popa, G.; De Temmerman, G.; van den Berg, M. A.; Scholten, J.; Brons, S.

    2015-02-01

    The linear plasma generator Magnum-PSI was designed for the study of plasma-surface interactions under relevant conditions of fusion devices. A key factor for such studies is the knowledge of a set of parameters that characterize the plasma interacting with the solid surface. This paper reports on the electrical diagnosis of the plasma beam in Magnum-PSI using a multi-probe system consisting of 64 probes arranged in a 2D square matrix. Cross-section distributions of floating potential and ion current intensity were registered for a hydrogen plasma beam under various discharge currents (80-175 A) and magnetic field strengths (0.47-1.41 T in the middle of the coils). Probe measurements revealed a high level of flexibility of plasma beam parameters with respect to the operating conditions.

  13. Floating-point standards: Theory and practice

    Energy Technology Data Exchange (ETDEWEB)

    Cody, W.J.

    1987-01-01

    ANSI/IEEE Std 754-1985, the IEEE Standard for Binary Floating-Point Arithmetic, has now been joined by IEEE Std 854-1987, A Radix- Independent Standard for Floating-Point Arithmetic. These standards specify floating-point arithmetic systems that are intended to simplify the preparation of high-quality numerical software. The success of these standards hinges on how well they are implemented and how well they are supported by enhancements to algebraic languages. This paper briefly outlines the arithmetic systems specified by the standards, and discusses some existing implementations. 16 refs., 1 tab.

  14. Floating point arithmetic in future supercomputers

    Science.gov (United States)

    Bailey, David H.; Barton, John T.; Simon, Horst D.; Fouts, Martin J.

    1989-01-01

    Considerations in the floating-point design of a supercomputer are discussed. Particular attention is given to word size, hardware support for extended precision, format, and accuracy characteristics. These issues are discussed from the perspective of the Numerical Aerodynamic Simulation Systems Division at NASA Ames. The features believed to be most important for a future supercomputer floating-point design include: (1) a 64-bit IEEE floating-point format with 11 exponent bits, 52 mantissa bits, and one sign bit and (2) hardware support for reasonably fast double-precision arithmetic.

  15. New CFOA-based floating immittance emulators

    Science.gov (United States)

    Taher Abuelma'atti, Muhammad; Dhar, Sagar Kumar

    2016-12-01

    This paper presents four new topologies for emulating floating immittance functions. Each circuit uses two or three current-feedback operational-amplifiers (CFOAs) and three passive elements. The proposed topologies can emulate positive/negative lossless and lossy floating inductances, and positive/negative capacitance, resistance and inductance multipliers in addition to floating frequency-dependent positive and negative resistances. The functionality of the proposed circuits is verified using the Advanced Design System software and the AD844 CFOA. The simulation results are in excellent agreement with the theoretical calculations.

  16. Controlled decoherence of floating flux qubits

    Institute of Scientific and Technical Information of China (English)

    Ji Ying-Hua; Xu Lin

    2010-01-01

    In Born-Markov approximation, this paper calculates the energy relaxation time T1 and the decoherence time T2 of a floating flux qubit by solving the set of Bloch-Redfield equations. It shows that there are two main factors influencing the floating flux qubits: coupling capacitor in the circuit and the environment resistor. It also discusses how to improvethe quantum coherence time of a qubit. Through shunt connecting/series connecting inductive elements, an inductive environment resistor is obtained and further the reactance component of the environment resistor is improved, which is beneficial to the enhancement of decoherence time of floating flux qubits.

  17. Capillary floating and the billiard ball problem

    CERN Document Server

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cylinders that float in neutral equilibrium at any orientation with constant contact angles.

  18. A Novel Ideal Floating Inductor Using Translinear Conveyors

    Directory of Open Access Journals (Sweden)

    Iqbal A. Khan

    2003-01-01

    Full Text Available An ideal floating inductor circuit using translinear conveyors is introduced. The floating inductor simulator uses two translinear conveyors and a single capacitor in its realization. The circuit provides the current controlled ideal floating inductance without any component matching constraints. Simulation results on the floating inductor simulator verify the theory

  19. 14 CFR 23.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 23.753 Section 23.753... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Floats and Hulls § 23.753 Main float design. Each seaplane main float must meet the requirements of § 23.521. ...

  20. Cascade Analysis of a Floating Wind Turbine Rotor

    Science.gov (United States)

    Eliassen, Lene; Jakobsen, Jasna B.; Knauer, Andreas; Nielsen, Finn Gunnar

    2014-12-01

    Mounting a wind turbine on a floating foundation introduces more complexity to the aerodynamic loading. The floater motion contains a wide range of frequencies. To study some of the basic dynamic load effect on the blades due to these motions, a two-dimensional cascade approach, combined with a potential vortex method, is used. This is an alternative method to study the aeroelastic behavior of wind turbines that is different from the traditional blade element momentum method. The analysis tool demands little computational power relative to a full three dimensional vortex method, and can handle unsteady flows. When using the cascade plane, a "cut" is made at a section of the wind turbine blade. The flow is viewed parallel to the blade axis at this cut. The cascade model is commonly used for analysis of turbo machineries. Due to the simplicity of the code it requires little computational resources, however it has limitations in its validity. It can only handle two-dimensional potential flow, i.e. including neither three-dimensional effects, such as the tip loss effect, nor boundary layers and stall effects are modeled. The computational tool can however be valuable in the overall analysis of floating wind turbines, and evaluation of the rotor control system. A check of the validity of the vortex panel code using an airfoil profile is performed, comparing the variation of the lift force, to the theoretically derived Wagner function. To analyse the floating wind turbine, a floating structure with hub height 90 m is chosen. An axial motion of the rotor is considered.

  1. Gastroretentive floating drug delivery systems with potential herbal drugs for Helicobacter pylori eradication: a review%胃内滞留漂浮给药系统中使用草药根除幽门螺旋杆菌的研究进展

    Institute of Scientific and Technical Information of China (English)

    Shreeraj H. SHAH; Jayvadan K. PATEL; Nirav V. PATEL

    2009-01-01

    @@ Helicobacter pylori are very common patho-genic bacteria colonizing about half of all populations and associated with the development of serious gastroduodenal diseases like gastric lym-phoma, peptic ulcers and acute chronic gastritis. Current drug regimes are not wholly effective. Other problems related with the current drug regimes are lack of patient compliance, side effects and bacterial resistance. Thus, drug delivery to the site of residence in the gastric mucosa may help in solving the problems associated with the current drug therapy. Gastric retentive delivery systems potentially allow increased penetration and thus increased drug concentration at the site of action. Floating drug delivery systems, expandable or swellable drug delivery systems and bioadhesive systems are the major areas of interest to formulate gastroretentive drug delivery system against H. pylori.

  2. Shipwreck! The floating inferno: Yarmouth Castle

    National Research Council Canada - National Science Library

    Armstrong, J; Ramer, H

    1998-01-01

    The Yarmouth Castle embarked on an overnight trip from Miami to the Bahamas every weekend - until November, 1965, when this midnight cruise to paradise became a floating inferno that left 87 passengers dead...

  3. Physical model tests for floating wind turbines

    DEFF Research Database (Denmark)

    Bredmose, Henrik; Mikkelsen, Robert Flemming; Borg, Michael

    Floating offshore wind turbines are relevant at sites where the depth is too large for the installation of a bottom fixed substructure. While 3200 bottom fixed offshore turbines has been installed in Europe (EWEA 2016), only a handful of floating wind turbines exist worldwide and it is still...... an open question which floater concept is the most economically feasible. The design of the floaters for the floating turbines relies heavily on numerical modelling. While several coupled models exist, data sets for their validation are scarce. Validation, however, is important since the turbine behaviour...... is complex due to the combined actions of aero- and hydrodynamic loads, mooring loads and blade pitch control. The present talk outlines two recent test campaigns with a floating wind turbine in waves and wind. Two floater were tested, a compact TLP floater designed at DTU (Bredmose et al 2015, Pegalajar...

  4. The floating city as an ecosystem

    NARCIS (Netherlands)

    Van Uffelen, C., Rentmeester, S.

    2015-01-01

    Floating construction: several municipalities in the Netherlands are working with it on a small scale. TU Delft alumnus Rutger de Graaf of the YesDelft company DeltaSync would like to speed things up with his Blue Revolution.

  5. Video-OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data release contains digital video files from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site...

  6. Genetics Home Reference: Floating-Harbor syndrome

    Science.gov (United States)

    ... child may have bones more typical of a child of 2. However, bone age is usually normal by age 6 to 12. Delay in speech development (expressive language delay) may be severe in Floating-Harbor syndrome , ...

  7. Genetic Algorithms, Floating Point Numbers and Applications

    Science.gov (United States)

    Hardy, Yorick; Steeb, Willi-Hans; Stoop, Ruedi

    The core in most genetic algorithms is the bitwise manipulations of bit strings. We show that one can directly manipulate the bits in floating point numbers. This means the main bitwise operations in genetic algorithm mutations and crossings are directly done inside the floating point number. Thus the interval under consideration does not need to be known in advance. For applications, we consider the roots of polynomials and finding solutions of linear equations.

  8. Verified Compilation of Floating-Point Computations

    OpenAIRE

    Boldo, Sylvie; Jourdan, Jacques-Henri; Leroy, Xavier; Melquiond, Guillaume

    2015-01-01

    International audience; Floating-point arithmetic is known to be tricky: roundings, formats, exceptional values. The IEEE-754 standard was a push towards straightening the field and made formal reasoning about floating-point computations easier and flourishing. Unfortunately, this is not sufficient to guarantee the final result of a program, as several other actors are involved: programming language, compiler, architecture. The CompCert formally-verified compiler provides a solution to this p...

  9. Travel Time Estimation Using Floating Car Data

    CERN Document Server

    Sevlian, Raffi

    2010-01-01

    This report explores the use of machine learning techniques to accurately predict travel times in city streets and highways using floating car data (location information of user vehicles on a road network). The aim of this report is twofold, first we present a general architecture of solving this problem, then present and evaluate few techniques on real floating car data gathered over a month on a 5 Km highway in New Delhi.

  10. Capillary floating and the billiard ball problem

    OpenAIRE

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cyli...

  11. Floating wetlands for urban stormwater treatment

    OpenAIRE

    Wang, Chih-Yu

    2013-01-01

    A floating treatment wetland (FTW) is an ecological approach which seeks to reduce point and nonpoint source pollution by installing substrate rooted plants grown on floating mats in open waters. While relatively novel, FTW use is increasing. A review of literature identified several research gaps, including: (1) assessments of the treatment performance of FTWs; (2) evaluations of FTWs in the U.S., particularly within wet ponds that receive urban runoff; and (3) plant temporal nutrient distri...

  12. Deoxyfluoro-D-trehalose (FDTre) analogues as potential PET probes for imaging mycobacterial infection: rapid synthesis and purification, conformational analysis, and uptake by mycobacteria

    Science.gov (United States)

    Rundell, Sarah R.; Wagar, Zachary L.; Meints, Lisa M.; Olson, Claire D.; O’Neill, Mara K.; Piligian, Brent F.; Poston, Anne W.; Hood, Robin J.; Woodruff, Peter J.

    2016-01-01

    Mycobacterium tuberculosis, the etiological agent of human tuberculosis, requires the non-mammalian disaccharide trehalose for growth and virulence. Recently, detectable trehalose analogues have gained attention as probes for studying trehalose metabolism and as potential diagnostic imaging agents for mycobacterial infections. Of particular interest are deoxy-[18F]fluoro-D-trehalose (18F-FDTre) analogues, which have been suggested as possible positron emission tomography (PET) probes for in vivo imaging of M. tuberculosis infection. Here, we report progress toward this objective, including the synthesis and conformational analysis of four non-radioactive deoxy-[19F]fluoro-D-trehalose (19F-FDTre) analogues, as well as evaluation of their uptake by M. smegmatis. The rapid synthesis and purification of several 19F-FDTre analogues was accomplished in high yield using a one-step chemoenzymatic method. Conformational analysis of the 19F-FDTre analogues using NMR and molecular modeling methods showed that fluorine substitution had a negligible effect on the conformation of the native disaccharide, suggesting that fluorinated analogues may be successfully recognized and processed by trehalose metabolic machinery in mycobacteria. To test this hypothesis and to evaluate a possible route for delivery of FDTre probes specifically to mycobacteria, we showed that 19F-FDTre analogues are actively imported into M. smegmatis via the trehalose-specific transporter SugABC-LpqY. Finally, to demonstrate the applicability of these results to the efficient preparation and use of short-lived 18F-FDTre PET radiotracers, we carried out 19F-FDTre synthesis, purification, and administration to M. smegmatis in 1 hour. PMID:27560008

  13. Probing the limitations of isotropic pair potentials to produce ground-state structural extremes via inverse statistical mechanics.

    Science.gov (United States)

    Zhang, G; Stillinger, F H; Torquato, S

    2013-10-01

    Inverse statistical-mechanical methods have recently been employed to design optimized short-range radial (isotropic) pair potentials that robustly produce novel targeted classical ground-state many-particle configurations. The target structures considered in those studies were low-coordinated crystals with a high degree of symmetry. In this paper, we further test the fundamental limitations of radial pair potentials by targeting crystal structures with appreciably less symmetry, including those in which the particles have different local structural environments. These challenging target configurations demanded that we modify previous inverse optimization techniques. In particular, we first find local minima of a candidate enthalpy surface and determine the enthalpy difference ΔH between such inherent structures and the target structure. Then we determine the lowest positive eigenvalue λ(0) of the Hessian matrix of the enthalpy surface at the target configuration. Finally, we maximize λ(0)ΔH so that the target structure is both locally stable and globally stable with respect to the inherent structures. Using this modified optimization technique, we have designed short-range radial pair potentials that stabilize the two-dimensional kagome crystal, the rectangular kagome crystal, and rectangular lattices, as well as the three-dimensional structure of the CaF(2) crystal inhabited by a single-particle species. We verify our results by cooling liquid configurations to absolute zero temperature via simulated annealing and ensuring that such states have stable phonon spectra. Except for the rectangular kagome structure, all of the target structures can be stabilized with monotonic repulsive potentials. Our work demonstrates that single-component systems with short-range radial pair potentials can counterintuitively self-assemble into crystal ground states with low symmetry and different local structural environments. Finally, we present general principles that offer

  14. Dilepton production as a useful probe of quark gluon plasma with temperature dependent chemical potential quark mass

    Science.gov (United States)

    Kumar, Yogesh; Singh, S. Somorendro

    2016-07-01

    We extend the previous study of dilepton production using [S. Somorendro Singh and Y. Kumar, Can. J. Phys. 92 (2014) 31] based on a simple quasiparticle model of quark-gluon plasma (QGP). In this model, finite value of quark mass uses temperature dependent chemical potential the so-called Temperature Dependent Chemical Potential Quark Mass (TDCPQM). We calculate dilepton production in the relevant range of mass region. It is observed that the production rate is marginally enhanced from the earlier work. This is due to the effect of TDCPQM and its effect is highly significant in the production of dilepton.

  15. Perceiving temporal regularity in music: The role of auditory event-related potentials (ERPs) in probing beat perception

    NARCIS (Netherlands)

    Honing, H.; Bouwer, F.L.; Háden, G.P.; Merchant, H.; de Lafuente, V.

    2014-01-01

    The aim of this chapter is to give an overview of how the perception of a regular beat in music can be studied in humans adults, human newborns, and nonhuman primates using event-related brain potentials (ERPs). Next to a review of the recent literature on the perception of temporal regularity in

  16. Model-independent measurement of the charge density distribution along an Fe atom probe needle using off-axis electron holography without mean inner potential effects

    Energy Technology Data Exchange (ETDEWEB)

    Migunov, V., E-mail: v.migunov@fz-juelich.de; Dunin-Borkowski, R. E. [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons (ER-C) and Peter Grünberg Institute (PGI), Forschungszentrum Jülich, D-52425 Jülich (Germany); London, A. [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Farle, M. [Fakultät für Physik and Center of Nanointegration (CeNIDE), Universität Duisburg-Essen, D-47048 Duisburg (Germany)

    2015-04-07

    The one-dimensional charge density distribution along an electrically biased Fe atom probe needle is measured using a model-independent approach based on off-axis electron holography in the transmission electron microscope. Both the mean inner potential and the magnetic contribution to the phase shift are subtracted by taking differences between electron-optical phase images recorded with different voltages applied to the needle. The measured one-dimensional charge density distribution along the needle is compared with a similar result obtained using model-based fitting of the phase shift surrounding the needle. On the assumption of cylindrical symmetry, it is then used to infer the three-dimensional electric field and electrostatic potential around the needle with ∼10 nm spatial resolution, without needing to consider either the influence of the perturbed reference wave or the extension of the projected potential outside the field of view of the electron hologram. The present study illustrates how a model-independent approach can be used to measure local variations in charge density in a material using electron holography in the presence of additional contributions to the phase, such as those arising from changes in mean inner potential and specimen thickness.

  17. Probing the global potential energy minimum of (CH2O)2: THz absorption spectrum of (CH2O)2 in solid neon and para-hydrogen

    DEFF Research Database (Denmark)

    Andersen, Jonas; Voute, A.; Mihrin, Dmytro

    2017-01-01

    . The combination of concentration dependency measurements, observed isotopic spectral shifts associated with H/D substitutions and dedicated annealing procedures, enables the unambiguous assignment of three large-amplitude infrared active hydrogen bond vibrational modes for the non-planar Cs configuration of (CH2O......The true global potential energy minimum configuration of the formaldehyde dimer (CH2O)2, including the presence of a single or a double weak intermolecular CH⋯O hydrogen bond motif, has been a long-standing subject among both experimentalists and theoreticians as two different energy minima...... conformations of Cs and C2h symmetry have almost identical energies. The present work demonstrates how the class of large-amplitude hydrogen bond vibrational motion probed in the THz region provides excellent direct spectroscopic observables for these weak intermolecular CH⋯O hydrogen bond motifs...

  18. Probing deconfinement in the Polyakov-loop extended Nambu-Jona-Lasinio model at imaginary chemical potential

    CERN Document Server

    Morita, Kenji; Friman, Bengt; Redlich, Krzysztof

    2011-01-01

    The phase structure of Polyakov-loop extended Nambu-Jona-Lasinio (PNJL) model is explored at imaginary chemical potential, with particular emphasis on the deconfinement transition. We point out that the statistical confinement nature of the model naturally leads to characteristic dependence of the chiral condensate $$ on $\\theta=\\mu_I/T$. We introduce a dual parameter for the deconfinement transition by making use of this dependence. By changing a four-fermion coupling constant, we tune the location of the critical endpoint of the deconfinement transition.

  19. Effect of Substrate Potential on Plasma Parameters of Magnetic Multicusp Plasma Source

    Science.gov (United States)

    Ueda, Yoshio; Goto, Masahiro

    1998-06-01

    The effect of substrate potential on plasmas produced in a magnetic multicusp plasma source has been studied experimentally. Plasma parameters such as electron temperature and plasma potential are estimated from electron energy distribution function numerically calculated from probe current-voltage characteristics. For a substrate potential of -150 V with respect to the source chamber, which is much lower than substrate floating potentials, the plasma parameters are not affected by the application of the potential. However, for the case where the substrate is shorted with the source chamber, the high energy component of electrons significantly decreases in comparison with the floating case leading to the reduction of electron temperature. In this case, plasma potential is positive with respect to the substrate to suppress electron loss but its absolute value is only of the order of electron temperature in eV, which is much lower than the potential between the plasma and the substrate in the floating case. This discharge mode could be advantageous in significantly reducing the ion impact energy to the substrate plate.

  20. Dynamically Reconfigurable Processor for Floating Point Arithmetic

    Directory of Open Access Journals (Sweden)

    S. Anbumani,

    2014-01-01

    Full Text Available Recently, development of embedded processors is toward miniaturization and energy saving for ecology. On the other hand, high performance arithmetic circuits are required in a lot of application in science and technology. Dynamically reconfigurable processors have been developed to meet these requests. They can change circuit configuration according to instructions in program instantly during operations.This paper describes, a dynamically reconfigurable circuit for floating-point arithmetic is proposed. The arithmetic circuit consists of two single precision floating-point arithmetic circuits. It performs double precision floating-point arithmetic by reconfiguration. Dynamic reconfiguration changes circuit construction at one clock cycle during operation without stopping circuits. It enables reconfiguration of circuits in a few nano seconds. The proposed circuit is reconfigured in two modes. In first mode it performs one double precision floating-point arithmetic or else the circuit will perform two parallel operations of single precision floating-point arithmetic. The new system design reduces implementation area by reconfiguring common parts of each operation. It also increases the processing speed with a very little number of clocks.

  1. On the dynamics of floating structures

    CERN Document Server

    Lannes, David

    2016-01-01

    This paper addresses the floating body problem which consists in studying the interaction of surface water waves with a floating body. We propose a new formulation of the water waves problem that can easily be generalized in order to take into account the presence of a floating body. The resulting equations have a compressible-incompressible structure in which the interior pressure exerted by the fluid on the floating body is a Lagrange multiplier that can be determined through the resolution of a $d$-dimensional elliptic equation, where $d$ is the horizontal dimension. In the case where the object is freely floating, we decompose the hydrodynamic force and torque exerted by the fluid on the solid in order to exhibit an added mass effect; in the one dimensional case $d=1$, the computations can be carried out explicitly. We also show that this approach in which the interior pressure appears as a Lagrange multiplier can be implemented on reduced asymptotic models such as the nonlinear shallow water equations an...

  2. Formulation and optimization of carbamazepine floating tablets

    Directory of Open Access Journals (Sweden)

    Patel D

    2007-01-01

    Full Text Available Floating tablets of carbamazepine were developed using melt granulation technique. Bees wax was used as a hydrophobic meltable material. Hydroxypropylmethylcellulose, sodium bicarbonate and ethyl cellulose were used as matrixing agent, gas-generating agent and floating enhancer, respectively. The tablets were evaluated for in vitro buoyancy and dissolution studies. A simplex lattice design was applied to investigate the combined effect of 3 formulation variables i.e. amount of hydroxypropyl methylcellulose ( X 1 , ethyl cellulose ( X 2 and sodium bicarbonate ( X 3 . The floating lag time (F lag , time required for 50% (t 50 and 80% drug dissolution (t 80 were taken as responses. Results of multiple regression analysis indicated that, low level of X 1 and X 2 , and high level of X 3 should be used to manufacture the tablet formulation with desired in vitro floating time and dissolution. Formulations developed using simplex lattice design were fitted to various kinetic models for drug release. Formulation S3 was selected as a promising formulation and was found stable at 40 o and 75% relative humidity for 3 months. Present study demonstrates the use of simplex lattice design in the development of floating tablets with minimum experimentation.

  3. A calibration method of Argo floats based on multiple regression analysis

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Argo floats are free-moving floats that report vertical profiles of salinity, temperature and pressure at regular time intervals. These floats give good measurements of temperature and pressure, but salinity measurements may show significant sensor drifting with time. It is found that sensor drifting with time is not purely linear as presupposed by Wong (2003). A new method is developed to calibrate conductivity data measured by Argo floats. In this method, Wong's objective analysis method was adopted to estimate the background climatological salinity field on potential temperature surfaces from nearby historical data in WOD01. Furthermore, temperature and time factors are taken into account, and stepwise regression was used for a time-varying or temperature-varying slope in potential conductivity space to correct the drifting in these profiling float salinity data. The result shows salinity errors using this method are smaller than that of Wong's method, the quantitative and qualitative analysis of the conductivity sensor can be carried out with our method.

  4. IMPY, a potential {beta}-amyloid imaging probe for detection of prion deposits in scrapie-infected mice

    Energy Technology Data Exchange (ETDEWEB)

    Song, P.-J. [INSERM, U619, F-37000 Tours (France); Universite Francois-Rabelais, F-37000 Tours (France); IFR135, F-37000 Tours (France); Bernard, Serge [IFR135, F-37000 Tours (France); INRA, UR1282, IASP, 37380 Nouzilly (France)], E-mail: bernard@tours.inra.fr; Sarradin, Pierre [INRA, UR1282, IASP, 37380 Nouzilly (France); Vergote, Jackie [INSERM, U619, F-37000 Tours (France); Universite Francois-Rabelais, F-37000 Tours (France); IFR135, F-37000 Tours (France); Barc, Celine [INRA, UR1282, IASP, 37380 Nouzilly (France); Chalon, Sylvie [INSERM, U619, F-37000 Tours (France); Universite Francois-Rabelais, F-37000 Tours (France); IFR135, F-37000 Tours (France); Kung, M.-P.; Kung, Hank F. [Department of Radiology, University of Pennsylvania, Philadelphia, PA 19104 (United States); Department of Pharmacology, University of Pennsylvania, Philadelphia, PA 19104 (United States); Guilloteau, Denis [INSERM, U619, F-37000 Tours (France); Universite Francois-Rabelais, F-37000 Tours (France); IFR135, F-37000 Tours (France)

    2008-02-15

    Introduction: A potential single-photon emission computed tomography imaging agent for labeling of A{beta} plaques of Alzheimer's disease, IMPY (2-(4'-dimethylaminophenyl)-6-iodo-imidazo[1,2-a]pyridine), would be effective in detection of prion amyloid deposits in transmissible spongiform encephalopathies (TSEs). Methods: In vitro autoradiographic studies were carried out with [{sup 125}I]IMPY on brain sections from scrapie-infected mice and age-matched controls. Competition study was performed to evaluate the prion deposit binding specificity with nonradioactive IMPY. Results: Binding of [{sup 125}I]IMPY was observed in infected brain sections, while on age-matched control brain sections, there was no or very low labeling. Prion deposit binding was confirmed by histoblots with prion protein-specific monoclonal antibody 2D6. In the presence of nonradioactive IMPY, the binding of [{sup 125}I]IMPY was significantly inhibited in all regions studied. Conclusions: These findings indicate that IMPY can detect the prion deposits in vitro in scrapie-infected mice. Labeled with {sup 123}I, this ligand may be useful to quantitate prion deposit burdens in TSEs by in vivo imaging.

  5. Economic Floating Waste Detectionfor Surface Cleaning Robots

    Directory of Open Access Journals (Sweden)

    Sumroengrit Jakkrit

    2017-01-01

    Full Text Available Removing waste out of water surface is a routine task and can be operated by using autonomous surface cleaning robots. This paper presents amethodoflaser-based floating waste detection for surface robot guidance when waste positions are unknown beforehand. Basing on concept of refraction and reflection of laser ray, the proposed laser-based technique is proven to be applicable on floating waste detection. The economic waste detector is constructed and mounted on the robot. Five DOF equations of motion are formulated for calculation of waste position incorporating distance measured by the laser and also the robot motion caused by external wind force as well as water surface tension. Experiments were conducted on a pond with calm water and results show that the presented economic waste detection successfully identify and locate position of plastic bottles floating on water surface within the range of 5 meters.

  6. Cationic spin probe reporting on thermal denaturation and complexation-decomplexation of BSA with SDS. Potential applications in protein purification processes.

    Science.gov (United States)

    Matei, Iulia; Ariciu, Ana Maria; Neacsu, Maria Victoria; Collauto, Alberto; Salifoglou, Athanasios; Ionita, Gabriela

    2014-09-25

    In this work, we present evidence on the suitability of spin probes to report on the thermal treatment of bovine serum albumin (BSA), in the temperature range 293-343 K, and indirectly monitor the release of sodium dodecyl sulfate (SDS) from its complex with BSA using a covalent gel with β-cyclodextrin (β-CD) in the network. The spin probes used, 5- and 7-doxyl-stearic acids (5-DSA, 7-DSA) or 4-(N,N'-dimethyl-N-hexadecyl)ammonium-2,2',6,6'-tetramethylpiperidine-1-oxyl iodide (CAT16), present similar, fatty acid-like structural features. Their continuous wave electron paramagnetic resonance (CW-EPR) spectra, however, reflect different dynamics when complexed with BSA: a restricted motion for 5-DSA, almost nonsensitive to the heating/cooling cycle, and a faster temperature-dependent dynamic motion for CAT16. Molecular docking allows us to rationalize these results by revealing the different binding modes of 5-DSA and CAT16. The EPR data on the temperature effect on BSA are supported by circular dichroism results projecting recovery, upon cooling, of the initial binding ability of BSA for samples heated to 323 K. The interactions occurring in BSA/SDS/β-CD systems are investigated by CW-EPR and FT-ESEEM spectroscopies. It is found that the covalent gel containing β-CD can efficiently remove SDS from the BSA/SDS complex. The gel is not permeable to BSA but it can encapsulate SDS, thus yielding the free protein in solution and allowing recovery of the native protein conformation. Collectively, the accrued knowledge supports potential applications in protein purification biotechnological processes.

  7. Wave attenuation around a large pontoon-type floating structure; Pontoon gata choogata futai shui no haro gensui ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kagemoto, H.; Fujino, M.; Ishii, H.; Yamashita, T. [The University of Tokyo, Tokyo (Japan)

    1996-10-01

    With an objective to identify actual conditions of wave attenuation at the bottom of an ultra-large floating structure, a model of a large pontoon-type floating structure was used to measure and discuss wave varying pressure distribution at the bottom of the floating structure subjected to regular waves. The experiment used a pontoon-type model having a length of 6.00 m and a depth of 1.20 m. A pressure sensor was embedded at the bottom of the floating body to measure the wave varying pressure. The experiment was performed in regular waves with wave amplitude kept constant nearly at 1.0 cm, and the wave cycle was changed between 0.475 and 1.000 sec. Angle of encounter with wave was set to four values of 0 degrees, 10 degrees, 45 degrees and 90 degrees. As a result of the experiment, it was verified that the wave varying pressure underneath the floating body agrees well with the linearity potential theoretical value, and the wave varying pressure attenuates to nearly zero inside the floating body from its end above waves to about one wave length. In addition, the pressure distribution in a direction perpendicular to waves was found nearly constant excepting the edges of the floating body. 3 refs., 7 figs.

  8. An improved calibration method for the drift of the conductivity sensor on autonomous CTD profiling floats by θ- S climatology

    Science.gov (United States)

    Owens, W. Brechner; Wong, Annie P. S.

    2009-03-01

    An improved method to estimate the time-varying drift of measured conductivity from autonomous CTD profiling floats has been developed. This procedure extends previous methods developed by Wong, Johnson and Owens [2003. Delayed-mode calibration of autonomous CTD profiling float salinity data by θ- S climatology. Journal of Atmospheric and Oceanic Technology, 20, 308-318] and Böhme and Send [2005. Objective analyses of hydrographic data for referencing profiling float salinities in highly variable environments. Deep-Sea Research Part II, 52, 651-664]. It uses climatological salinity interpolated to the float positions and observed θ surfaces and chooses 10 'best' levels that are within well-mixed mode waters or deep homogeneous water masses. A piece-wise linear fit is used to estimate the temporally varying multiplicative adjustment to the float potential conductivities. An objective, statistical method is used to choose the breakpoints in the float time series where there are multiple drift trends. In the previous methods these breakpoints were chosen subjectively by manually splitting the time series into separate segments over which the fits were made. Our statistical procedure reduces the subjectivity by providing an automated way for doing the piece-wise linear fit. Uncertainties in this predicted adjustment are estimated using a Monte-Carlo simulation. Examples of this new procedure as applied to two Argo floats are presented.

  9. Block floating point for radar data

    DEFF Research Database (Denmark)

    Christensen, Erik Lintz

    1999-01-01

    Integer, floating point, and block floating point (BFP) data formats are analyzed and compared in order to establish the mathematical tools for selection of an optimal format which fulfils the demands of high resolution radar (SAR) data to large dynamic range and adequate S/N. The analysis takes...... quantization noise and saturation distortion into account and concludes that it is preferred to use small blocks and a (new) modified BFP format applying fractional exponents. Data from the EMISAR radar system are applied to illustrate the merits of the different schemes....

  10. FLOAT2 WP4: Development of Materials

    DEFF Research Database (Denmark)

    Esteves, Luis Pedro; Aarup, Bendt

    This report refers to complementary material testing to support the design and production of UHPC floaters for installation in the Wave Star Machine under FLOAT2 project. The main objective of WP4 is the characterization of mechanical properties of fiber-reinforced UHPC.......This report refers to complementary material testing to support the design and production of UHPC floaters for installation in the Wave Star Machine under FLOAT2 project. The main objective of WP4 is the characterization of mechanical properties of fiber-reinforced UHPC....

  11. Improvements in floating point addition/subtraction operations

    Energy Technology Data Exchange (ETDEWEB)

    Farmwald, P.M.

    1984-02-24

    Apparatus is described for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  12. Floating Inductance and FDNR Using Positive Polarity Current Conveyors

    OpenAIRE

    Pal, K.

    2004-01-01

    A generalized circuit based on five positive polarity second-generation current conveyors is introduced. The circuit simulates a floating inductance, capacitor floatation circuit and floating fdnr. All these circuits use grounded capacitors.

  13. Floating Inductance and FDNR Using Positive Polarity Current Conveyors

    Directory of Open Access Journals (Sweden)

    K. Pal

    2004-01-01

    Full Text Available A generalized circuit based on five positive polarity second-generation current conveyors is introduced. The circuit simulates a floating inductance, capacitor floatation circuit and floating fdnr. All these circuits use grounded capacitors.

  14. Argo Float Data from the APDRC DAPPER Server

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The floats are designed to drift at a fixed pressure (usually 1000 dbar) for 10 days. After this period, the floats move to a profiling pressure (usually between...

  15. Probe Storage

    NARCIS (Netherlands)

    Gemelli, Marcellino; Abelmann, Leon; Engelen, Johan B.C.; Khatib, Mohammed G.; Koelmans, Wabe W.; Zaboronski, Olog; Campardo, Giovanni; Tiziani, Federico; Laculo, Massimo

    2011-01-01

    This chapter gives an overview of probe-based data storage research over the last three decades, encompassing all aspects of a probe recording system. Following the division found in all mechanically addressed storage systems, the different subsystems (media, read/write heads, positioning, data chan

  16. Cultural probes

    DEFF Research Database (Denmark)

    Madsen, Jacob Østergaard

    2016-01-01

    The aim of this study was thus to explore cultural probes (Gaver, Boucher et al. 2004), as a possible methodical approach, supporting knowledge production on situated and contextual aspects of occupation.......The aim of this study was thus to explore cultural probes (Gaver, Boucher et al. 2004), as a possible methodical approach, supporting knowledge production on situated and contextual aspects of occupation....

  17. Validation of salinity data from ARGO floats: Comparison between the older ARGO floats and that of later deployments

    Digital Repository Service at National Institute of Oceanography (India)

    Youn, Y.-H.; Lee, H.; Chang, Y.-S.; Pankajakshan, T.

    Continued observation of ARGO floats or years (about 4 years) makes the conductivity sensor more vulnerable to fouling by marine life and associated drift in salinity measurements. In this paper, we address this issue by making use of floats...

  18. 14 CFR 29.757 - Hull and auxiliary float strength.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and auxiliary float strength. 29.757 Section 29.757 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... § 29.757 Hull and auxiliary float strength. The hull, and auxiliary floats if used, must withstand...

  19. 14 CFR 25.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 25.753 Section 25.753 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.753 Main float design...

  20. 40 CFR 65.45 - External floating roof converted into an internal floating roof.

    Science.gov (United States)

    2010-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Storage Vessels § 65.45... control storage vessel regulated material emissions by using an external floating roof converted into an...

  1. A Flexible VHDL Floating Point Module for Control Algorithm Implementation in Space Applications

    Science.gov (United States)

    Padierna, A.; Nicoleau, C.; Sanchez, J.; Hidalgo, I.; Elvira, S.

    2012-08-01

    The implementation of control loops for space applications is an area with great potential. However, the characteristics of this kind of systems, such as its wide dynamic range of numeric values, make inadequate the use of fixed-point algorithms.However, because the generic chips available for the treatment of floating point data are, in general, not qualified to operate in space environments and the possibility of using an IP module in a FPGA/ASIC qualified for space is not viable due to the low amount of logic cells available for these type of devices, it is necessary to find a viable alternative.For these reasons, in this paper a VHDL Floating Point Module is presented. This proposal allows the design and execution of floating point algorithms with acceptable occupancy to be implemented in FPGAs/ASICs qualified for space environments.

  2. PLM floating-point interface program

    Energy Technology Data Exchange (ETDEWEB)

    Paoni, C.; Maples, M.

    1976-03-03

    A major failing of Intel's PLM language is its inability to handle scientific notation (floating-point) calculations. An interface program that allows PLM to perform such calculations is described. A comparison of this modified PLM with an assembly language program has shown PLM's effectiveness in reducing the cost of a project. (auth)

  3. Floating RC Networks Using Current Conveyors

    OpenAIRE

    Zeman, V; J. Cajka; Vrba, K.

    1996-01-01

    The paper deals with the design of floating one- and/or two-port high-order networks. The current conveyor CCII+ seems to be a suitable active building block for this purpose. Some examples of the above mentioned networks are shown .

  4. Floating RC Networks Using Current Conveyors

    Directory of Open Access Journals (Sweden)

    V. Zeman

    1996-06-01

    Full Text Available The paper deals with the design of floating one- and/or two-port high-order networks. The current conveyor CCII+ seems to be a suitable active building block for this purpose. Some examples of the above mentioned networks are shown .

  5. A novel floating offshore wind turbine concept

    DEFF Research Database (Denmark)

    Vita, Luca; Schmidt Paulsen, Uwe; Friis Pedersen, Troels

    2009-01-01

    This paper will present a novel concept of a floating offshore wind turbine. The new concept is intended for vertical-axis wind turbine technology. The main purpose is to increase simplicity and to reduce total costs of an installed offshore wind farm. The concept is intended for deep water...

  6. Floating car data for traffic monitoring

    DEFF Research Database (Denmark)

    Torp, Kristian; Lahrmann, Harry Spaabæk

    2005-01-01

    This paper describes a complete prototype system that uses Floating Car Data (FCD) for both automatic and manual detection of queues in traffic. The system is developed under EU’s Tempo program. The systems consists of small hardware units placed in mobile traffic report units (we use taxis...

  7. Reis kosmosesse : [Floating-kambrist] / Marika Makarova

    Index Scriptorium Estoniae

    Makarova, Marika

    2011-01-01

    Ameerika psühholoogi John C. Lilly poolt kasutusele võetud Floating-kambrist ehk hõljumisvannist, mis aeglustab ajulaineid ning seeläbi aitab vähendada lihaspinget, stressi, ärevust, peavalusid, vererõhku ning parandada und, selgroo- ja kaelavigastusi, suurendada loovust ja heaolu jne

  8. Immunohistochemistry on freely floating fixed tissue sections.

    Science.gov (United States)

    Bachman, Julia

    2013-01-01

    Immunohistochemistry on free floating tissue sections is done for many reasons, all of which involve labeling tissue to visualize a certain cell type, protein, or structural component. Visualization is aided by mounting sections on microscope slides for stabilization, and is in most cases necessary for the appropriate use of objectives with a high numerical aperture and high degree of magnification.

  9. Two New Families of Floating FDNR Circuits

    Directory of Open Access Journals (Sweden)

    Ahmed M. Soliman

    2010-01-01

    Full Text Available Two new configurations for realizing ideal floating frequency-dependent negative resistor elements (FDNR are introduced. The proposed circuits are symmetrical and are realizable by four CCII or ICCII or a combination of both. Each configuration is realizable by eight different circuits. Simulation results are included to support the theory.

  10. Floating Breakwater Prototype Test Program: Seattle, Washington.

    Science.gov (United States)

    1986-03-01

    foam weight increased 250 percent because of the absorption of water. This absorption, combined with underfilling of tires during the original...A 2 the float was done in three lifts of about 1 ft each. Handheld electric vibrators were used to reduce the possibility of voids . After the sides

  11. Near-Shore Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Ruol, Piero; Zanuttigh, Barbara; Martinelli, Luca

    2011-01-01

    Aim of this note is to analyse the possible application of a Wave Energy Converter (WEC) as a combined tool to protect the coast and harvest energy. Physical model tests are used to evaluate wave transmission past a near-shore floating WEC of the wave activated body type, named DEXA. Efficiency...

  12. Reis kosmosesse : [Floating-kambrist] / Marika Makarova

    Index Scriptorium Estoniae

    Makarova, Marika

    2011-01-01

    Ameerika psühholoogi John C. Lilly poolt kasutusele võetud Floating-kambrist ehk hõljumisvannist, mis aeglustab ajulaineid ning seeläbi aitab vähendada lihaspinget, stressi, ärevust, peavalusid, vererõhku ning parandada und, selgroo- ja kaelavigastusi, suurendada loovust ja heaolu jne

  13. Moessbauer spectra of tin in float glass

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.A. [Liverpool John Moores Univ. (United Kingdom). Sch. of the Built Environ.; Johnson, C.E. [Liverpool Univ. (United Kingdom). Dept. of Physics; Williams, K.F.E. [Liverpool Univ. (United Kingdom). Dept. of Physics; Holland, D. [Warwick Univ., Coventry (United Kingdom). Dept. of Physics; Karim, M.M. [Warwick Univ., Coventry (United Kingdom). Dept. of Physics

    1995-03-01

    Tin is not a major constituent of window glass, but is found at high concentrations in the lower surface of float glass which has been in contact with the molten tin bath. It does not extend far into the surface, but causes the physical and chemical behaviour to differ from that of the upper surface. It is important, therefore, to understand the structural role of tin in silicate glasses and thus its effect on various properties. Moessbauer spectra were taken of three series of glassy materials, namely binary glasses (SnO and SiO{sub 2}) in varying proportions, re-melted float glass containing tin, and float glass from a production plant. The binary glasses contained between 20 and 70% tin which was found to be mainly Sn{sup 2+}, with very small amounts of Sn{sup 4+} in some of them. The spectra showed a small decrease in isomer shift with increase in tine content, which is ascribed to the change in molar volume. The re-melted samples were float glass which was mixed with stannous oxalate in appropriate conditions to try and maintain tin in the 2+ state, and contained up to 15% tin by weight. The spectra show both Sn{sup 4+} and Sn{sup 2+} with rather more in the 4+ oxidation state. The change in the spectra as a function of temperature revealed a large difference in the f-factor (and hence the chemical binding) of the two states. A series of spectra was taken between 17.5 and 900 K for the sample containing 15% tin. From the absorption as a function of temperature the f-factor was determined for both oxidation states, and hence enabled the relative amounts of Sn{sup 4+} and Sn{sup 2+} present in each sample to be estimated. Measurements of the shift as a function of temperature were also made. The float samples were surface material produced by grinding away all but 0.1 mm of the lower surface of industrially produced float glass. The Moessbauer spectra showed them to be predominantly Sn{sup 2+}, as expected from the reducing atmosphere in the float plant.

  14. Development of floating strip micromegas detectors

    Energy Technology Data Exchange (ETDEWEB)

    Bortfeldt, Jonathan

    2014-04-28

    Micromegas are high-rate capable, high-resolution micro-pattern gaseous detectors. Square meter sized resistive strip Micromegas are foreseen as replacement of the currently used precision tracking detectors in the Small Wheel, which is part of the forward region of the ATLAS muon spectrometer. The replacement is necessary to ensure tracking and triggering performance of the muon spectrometer after the luminosity increase of the Large Hadron Collider beyond its design value of 10{sup 34} cm{sup -2}s{sup -1} around 2020. In this thesis a novel discharge tolerant floating strip Micromegas detector is presented and described. By individually powering copper anode strips, the effects of a discharge are confined to a small region of the detector. This reduces the impact of discharges on the efficiency by three orders of magnitude, compared to a standard Micromegas. The physics of the detector is studied and discussed in detail. Several detectors are developed: A 6.4 x 6.4 cm{sup 2} floating strip Micromegas with exchangeable SMD capacitors and resistors allows for an optimization of the floating strip principle. The discharge behavior is investigated on this device in depth. The microscopic structure of discharges is quantitatively explained by a detailed detector simulation. A 48 x 50 cm{sup 2} floating strip Micromegas is studied in high energy pion beams. Its homogeneity with respect to pulse height, efficiency and spatial resolution is investigated. The good performance in high-rate background environments is demonstrated in cosmic muon tracking measurements with a 6.4 x 6.4 cm{sup 2} floating strip Micromegas under lateral irradiation with 550 kHz 20 MeV proton beams. A floating strip Micromegas doublet with low material budget is developed for ion tracking without limitations from multiple scattering in imaging applications during medical ion therapy. Highly efficient tracking of 20 MeV protons at particle rates of 550 kHz is possible. The reconstruction of the

  15. Floating attenuator wave energy device: Wavegen HYDRA project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This report describes research funded by the Department of Trade and Industry (DTI) into the feasibility of developing and constructing a floating attenuator wave energy device known as HYDRA following initial studies by Wavegen. HYDRA is a floating externally tensioned articulated raft wave energy generator based on work by Professor FJM Farley and colleagues during the 1980s. The project's first four work tasks confirmed the theoretical potential of the device but also highlighted significant practical problems in translating that potential into a viable design. It was therefore decided not to proceed further, i.e. not to construct and test a prototype device. The report provides a general description of the device and describes the results of the initial analysis and the first series of model tests. It then discusses device design and component testing and explains the methodology for determining device performance at a particular site and mathematical modelling of a one-third scale device. To help future research and development programmes, the report emphasises the generic problems associated with the development of wave devices.

  16. Using floating vegetation to remove nutrients from an anaerobic swine wastewater lagoon

    Science.gov (United States)

    Methods are needed for utilizing nutrients contained within animal wastewater lagoons. One potential method for removing nutrients is to have vegetation growing in the lagoon. A study was conducted from 2005-2007 to determine the feasibility of growing vegetation on floating platforms on a single ...

  17. Quantifying Thin Mat Floating Marsh Strength and Interaction with Hydrodynamic Conditions

    Science.gov (United States)

    Collins, J. H., III; Sasser, C.; Willson, C. S.

    2016-12-01

    floating marshes are determined for a multitude of mat shapes and sizes, leading to a quantifiable critical velocity required for washout. Ultimately, through dimensional analysis, an equation for washout potential will be developed from the results, which could be used as a design guideline.

  18. Experimentally probing the libration of interfacial water: the rotational potential of water is stiffer at the air/water interface than in bulk liquid.

    Science.gov (United States)

    Tong, Yujin; Kampfrath, Tobias; Campen, R Kramer

    2016-07-21

    Most properties of liquid water are determined by its hydrogen-bond network. Because forming an aqueous interface requires termination of this network, one might expect the molecular level properties of interfacial water to markedly differ from water in bulk. Intriguingly, much prior experimental and theoretical work has found that, from the perspective of their time-averaged structure and picosecond structural dynamics, hydrogen-bonded OH groups at an air/water interface behave the same as hydrogen-bonded OH groups in bulk liquid water. Here we report the first experimental observation of interfacial water's libration (i.e. frustrated rotation) using the laser-based technique vibrational sum frequency spectroscopy. We find this mode has a frequency of 834 cm(-1), ≈165 cm(-1) higher than in bulk liquid water at the same temperature and similar to bulk ice. Because libration frequency is proportional to the stiffness of water's rotational potential, this increase suggests that one effect of terminating bulk water's hydrogen bonding network at the air/water interface is retarding rotation of water around intact hydrogen bonds. Because in bulk liquid water the libration plays a key role in stabilizing reaction intermediates and dissipating excess vibrational energy, we expect the ability to probe this mode in interfacial water to open new perspectives on the kinetics of heterogeneous reactions at aqueous interfaces.

  19. Receptor binding characterization of the benzodiazepine radioligand sup 125 I-Ro16-0154: Potential probe for SPECT (Single Photon Emission Computed Tomography) brain imaging

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, E.W.; Woods, S.W.; Zoghbi, S.; Baldwin, R.M.; Innis, R.B. (Yale Univ., West Haven, CT (USA)); McBride, B.J. (Medi-Physics, Inc., Emeryville, CA (USA))

    1990-01-01

    The binding of an iodinated benzodiazepine (BZ) radioligand has been characterized, particularly in regard to its potential use as a neuroreceptor brain imaging agent with SPECT (Single Photon Emission Computed Tomography). Ro16-0154 is an iodine-containing BZ antagonist and a close analog of Ro15-1788. In tissue homogenates prepared from human and monkey brain, the binding of {sup 125}I-labeled Ro16-0154 was saturable, of high affinity, and had high ratios of specific to non-specific binding. Physiological concentrations of NaCl enhanced specific binding approximately 15% compared to buffer without this salt. Kinetic studies of association and dissociation demonstrated a temperature dependent decrease in affinity with increasing temperature. Drug displacement studies confirmed that {sup 125}I-Ro16-0154 binds to the central type BZ receptor: binding is virtually identical to that of {sup 3}H-Ro15-1788 except that {sup 125}I-Ro16-0154 shows an almost 10 fold higher affinity at 37{degree}C. These in vitro results suggest that {sup 123}I-labeled Ro16-0154 shows promise as a selective, high affinity SPECT probe of the brain's BZ receptor.

  20. Microwave power coupling with electron cyclotron resonance plasma using Langmuir probe

    Indian Academy of Sciences (India)

    S K Jain; V K Senecha; P A Naik; P R Hannurkar; S C Joshi

    2013-07-01

    Electron cyclotron resonance (ECR) plasma was produced at 2.45 GHz using 200 – 750 W microwave power. The plasma was produced from argon gas at a pressure of 2 × 10−4 mbar. Three water-cooled solenoid coils were used to satisfy the ECR resonant conditions inside the plasma chamber. The basic parameters of plasma, such as electron density, electron temperature, floating potential, and plasma potential, were evaluated using the current–voltage curve using a Langmuir probe. The effect of microwave power coupling to the plasma was studied by varying the microwave power. It was observed that the optimum coupling to the plasma was obtained for ∼ 600 W microwave power with an average electron density of ∼ 6 × 1011 cm−3 and average electron temperature of ∼ 9 eV.

  1. Kinetic Isotope Effects as a Probe for the Protonolysis Mechanism of Alkylmetal Complexes: VTST/MT Calculations Based on DFT Potential Energy Surfaces.

    Science.gov (United States)

    Mai, Binh Khanh; Kim, Yongho

    2016-10-03

    Protonolysis by platinum or palladium complexes has been extensively studied because it is the microscopic reverse of the C-H bond activation reaction. The protonolysis of (COD)Pt(II)Me2, which exhibits abnormally large kinetic isotope effects (KIEs), is proposed to occur via a concerted pathway (SE2 mechanism) with large tunneling. However, further investigation of KIEs for the protonolysis of ZnMe2 and others led to a conclusion that there is no noticeable correlation between the mechanism and magnitude of KIE. In this study, we demonstrated that variational transition state theory including multidimensional tunneling (VTST/MT) could accurately predict KIEs and Arrhenius parameters of the protonolysis of alkylmetal complexes based on the potential energy surfaces generated by density functional theory. The predicted KIEs, Ea(D) - Ea(H) values, and AH/AD ratios for the protonolysis of (COD)Pt(II)Me2 and Zn(II)Me2 by TFA agreed very well with experimental values. The protonolysis of ZnMe2 with the concerted pathway has a very flat potential energy surface, which produces a very small tunneling effect and therefore a small KIE. The predicted KIE for the stepwise protonolysis (SE(ox) mechanism) of (COD)Pt(II)Me2 was much smaller than that of the concerted pathway, but greater than the KIE of the concerted protonolysis of ZnMe2. A large KIE, which entails a significant tunneling effect, could be used as an experimental probe of the concerted pathway. However, a normal or small KIE should not be used as an indicator of the stepwise mechanism, and the interplay between experiments and reliable theory including tunneling would be essential to uncover the mechanism correctly.

  2. ENZYME ACTIVITY PROBE AND GEOCHEMICAL ASSESSMENT FOR POTENTIAL AEROBIC COMETABOLISM OF TRICHLOROETHENE IN GROUNDWATER OF THE NORTHWEST PLUME, PADUCAH GASEOUS DIFFUSION PLANT, KENTUCKY

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B; M. Hope Lee, M; S. K. Hampson, S

    2008-06-27

    plume. If the multiple lines of evidence support the occurrence of cometabolism and the potential for the process to contribute to temporal and spatial attenuation of TCE in PGDP groundwater, then a follow-up enzyme probe microcosm study to better estimate biological degradation rate(s) is warranted.

  3. A multiple floating point coprocessor architecture

    Energy Technology Data Exchange (ETDEWEB)

    Rauchwerger, L.; Farmwald, M.P. (Center for Supercomputing Research and Development, Univ. of Illinois at Urbana-Champaign, 305 Talbot Lab., Urbana, IL (US))

    1990-06-01

    General purpose microprocessor based computers usually speed their arithmetic processing performance by using a floating point co-processor. Because adding more co-processors represents neither a technological nor a cost problem the authors investigated a system based on a MIPS R2000 (2) and 4 floating point units. In this paper they show a block diagram of such an implementation and how two important scientific operations can be accelerated using a single unmodified data bus. A large percentage of the engineering applications are solved with the help of linear algebra methods like BLAS3 (4) algorithms; it is precisely for these primitives that the proposed architecture brings significant performance gains. The first operation described is a matrix multiplication algorithm, its timing diagram and some results. Next a polynomial evaluation technique is examined. The authors show how to use the same ideas with various other microprocessors.

  4. Optimizing polynomials for floating-point implementation

    CERN Document Server

    De Dinechin, Florent

    2008-01-01

    The floating-point implementation of a function on an interval often reduces to polynomial approximation, the polynomial being typically provided by Remez algorithm. However, the floating-point evaluation of a Remez polynomial sometimes leads to catastrophic cancellations. This happens when some of the polynomial coefficients are very small in magnitude with respects to others. In this case, it is better to force these coefficients to zero, which also reduces the operation count. This technique, classically used for odd or even functions, may be generalized to a much larger class of functions. An algorithm is presented that forces to zero the smaller coefficients of the initial polynomial thanks to a modified Remez algorithm targeting an incomplete monomial basis. One advantage of this technique is that it is purely numerical, the function being used as a numerical black box. This algorithm is implemented within a larger polynomial implementation tool that is demonstrated on a range of examples, resulting in ...

  5. Lightning Protection of Floating Roof Tanks

    Directory of Open Access Journals (Sweden)

    Adekitan,

    2013-10-01

    Full Text Available Prior to export, processed crude oil is stored in Floating Roof Tanks (FRT to further allow any trapped gas within the crude oil to escape, as this stabilises the crude oil. In the oil and gas industry, FRT’s are vital in the processing of crude oil to the acceptable export specification.In the tropics and other lightning prone regions, lightning induced floating roof tank fire constitutes a major threat to crude oil production. Among others, a single lightning incident could result in the loss of life, product and production time, avoidable incident review time, damaged equipment, wasted repair cost, bad publicity and loss of income.This paper therefore, is aimed at providing an effective solution to the menace of lightning induced tank fire by focussing on the starting process of the lightning induced fire and proposing alternative concepts for breaking the fire triangle before fire ensues

  6. Capillary deposition of advected floating particles

    Science.gov (United States)

    Dressaire, Emilie; Debaisieux, Aymeric; Gregori, Federico

    2016-11-01

    The deposition and aggregation of particles flowing through a confined environment can dramatically hinder the transport of suspensions. Yet, the mechanisms responsible for the deposition of particles in shear flow are not fully understood. Here, we use an experimental model system in which floating particles are advected on the surface of a water channel and deposited on fixed obstacles through attractive capillary effects. By varying the flow rate of the liquid, the wetting properties and size of the particles and obstacles, we can tune the magnitude of the capillary and hydrodynamic forces that determine the probability of deposition and the equilibrium position on the substrate. We show that arrays of obstacles can be designed to efficiently capture the floating particles advected by the flow.

  7. Seismic Response of Submerged Floating Tunnel Tether

    Institute of Scientific and Technical Information of China (English)

    SU Zhi-bin; SUN Sheng-nan

    2013-01-01

    A mathematical equation for vibration of submerged floating tunnel tether under the effects of earthquake and parametric excitation is presented.Multi-step Galerkin method is used to simplify this equation and the fourth-order Runge-Kuta integration method is used for numerical analysis.Finally,vibration response of submerged floating tunnel tether subjected to earthquake and parametric excitation is analyzed in a few numerical examples.The results show that the vibration response of tether varies with the seismic wave type; the steady maximum mid-span displacement of tether subjected to seismic wave keeps constant when parametric resonance takes place; the transient maximum mid-span displacement of tether is related to the peak value of input seismic wave acceleration.

  8. Can Oil Float Completely Submerged in Water?

    CERN Document Server

    Nath, Saurabh; Chatterjee, Souvick

    2013-01-01

    Droplet formation in a system of two or more immiscible fluids is a celebrated topic of research in the fluid mechanics community. In this work, we propose an innovative phenomenon where oil when injected drop-wise into a pool of water moves towards the air-water interface where it floats in a fully submerged condition. The configuration, however, is not stable and a slight perturbation to the system causes the droplet to burst and float in partially submerged condition. The droplet contour is analyzed using edge detection. Temporal variation of a characteristic length of the droplet is analyzed using MATLAB image processing. The constraint of small Bond Number established the assumption of lubrication regime in the thin gap. A brief theoretical formulation also showed the temporal variation of the gap thickness

  9. Conceptual Design of Navy Floating Pier.

    Science.gov (United States)

    1982-09-01

    which do not have existing flood basins or dry dock facilities. 3.1.3 The Advantages As Navy Piers The floating pier provides a structure well suited to...Bureau of Yards and Docks built 13 reinforced concrete floating repair docks each of 280 ton lift capacity. Bach dock was 390 ft. long, 80 ft. wide and...4 176CK ApoQ &LLKHC-AP6, COLUMNN AND eAr4b V~JricAL- roA~~scN LY T’B 4OPr~C-. I200-+0k 𔄀 CELLO £TNAT STRUCTUARAL EN4GINEERING " NrE FZ IR MJUə

  10. Migration Laws of Floating Population in Mianyang

    Institute of Scientific and Technical Information of China (English)

    LiuPeng

    2005-01-01

    Based on the overall anatysis of the floating population among big and medium-sized cities in China, this paper, by means of statistics and questionnaires, makes a systematical study on the migratory features of the floating population in Mianyang, its employment structure, migrating causes and channels, According to the findings, the author finds a fact that with the strategy of Western Development, and with the construction of science and technology city of Mianyang, the migrating in Mianyang conforms to the general patterns of themigration, which has happened in those big and medium-sized cities in China. In addition, the city has a new but unique feature - economic factor, as the driving force of popufation migration, is quite distinct from that of those cities in eastern areas of China.

  11. FLOATING DRUG DELIVERY SYSTEM - CHRONOTHERAPEUTIC APPROACH

    Directory of Open Access Journals (Sweden)

    Vishal Kalal

    2011-04-01

    Full Text Available The purpose of writing this review on the floating drug delivery systems (FDDS was to compile the recent literature with special focus on the principal mechanism of floatation to achieve gastric retention. FDDS is one of the approaches in chronotherapeutic drug delivery. In the past reviews of FDDS the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, their classification and formulation aspects have been covered. This review summarizes the special focus on chronotherapeutics, diseases affected by biological rhythm, its importance, advantages, various approaches in Chronotherapeutic drug delivery and applications of FDDS. These systems are useful for several problems encountered during the development of a pharmaceutical dosage forms.

  12. Voltage-Controlled Floating Resistor Using DDCC

    Directory of Open Access Journals (Sweden)

    M. Kumngern

    2011-04-01

    Full Text Available This paper presents a new simple configuration to realize the voltage-controlled floating resistor, which is suitable for integrated circuit implementation. The proposed resistor is composed of three main components: MOS transistor operating in the non-saturation region, DDCC, and MOS voltage divider. The MOS transistor operating in the non-saturation region is used to configure a floating linear resistor. The DDCC and the MOS transistor voltage divider are used for canceling the nonlinear component term of MOS transistor in the non-saturation region to obtain a linear current/voltage relationship. The DDCC is employed to provide a simple summer of the circuit. This circuit offers an ease for realizing the voltage divider circuit and the temperature effect that includes in term of threshold voltage can be compensated. The proposed configuration employs only 16 MOS transistors. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory.

  13. Management of "floating elbow" in children

    Directory of Open Access Journals (Sweden)

    Suresh S

    2007-01-01

    Full Text Available Background: Supracondylar fractures associated with ipsilateral forearm fractures, aptly termed as "floating elbow" is a rare injury in children after a fall from height. The various authors report their results with conservative treatment of one or both injury to aggressive emergency operative fixation of both components. Materials and Methods: During a period of three years, the author managed four cases of floating elbow in children. All cases were managed by closed reduction and pinning of both components of the injury. Results: All patients recovered full elbow range of motion at three months followup and were rated as excellent as per modified Flynn′s criteria. None of the patients developed cubitus varus deformity, complications related to the pins or delayed union. Conclusions: Early closed reduction and K wire fixation of both components of this injury gives better stability and prevents development of complications like compartment syndrome and elbow deformities.

  14. Floating behavior of hydrophobic glass spheres.

    Science.gov (United States)

    Liu, Xinjie; Wang, Xiaolong; Liang, Yongmin; Zhou, Feng

    2009-08-15

    When a hydrophobic solid sphere is floating on water or salt solutions with different concentrations, it is at equilibrium under the impact of gravity, buoyancy force, and curvature force, the component of surface tension in the vertical direction. We have changed the diameters of the spheres and the concentrations of the two selected salts, NaCl and NaNO(3), to study the floating behaviors of these spheres and the contributions of surface tension and buoyancy force to their floatation. Generally speaking, the surface tension plays a more important role than the buoyancy force when the gravity is small, but the buoyancy force plays an identical or a more important role when the spheres are big enough. The wettability of the spheres significantly influences the height below the contact perimeter especially in salt solutions. The theoretical calculation meniscus slope angles at the sphere three-phase contact line are in agreement with experimental results.

  15. Arithmetic Operations Beyond Floating Point Number Precision

    CERN Document Server

    Wang, Chih-Yueh; Chen, Hong-Yu; Chen, Yung-Ko

    2010-01-01

    In basic computational physics classes, students often raise the question of how to compute a number that exceeds the numerical limit of the machine. While technique of avoiding overflow/underflow has practical application in the electrical and electronics engineering industries, it is not commonly utilized in scientific computing, because scientific notation is adequate in most cases. We present an undergraduate project that deals with such calculations beyond a machine's numerical limit, known as arbitrary precision arithmetic. The assignment asks students to investigate the validity of floating point number precision and the approach of calculating the exact value of a large number, using the basic scientific programming language Fortran. Examples of the successive multiplication of even number and the multiplication and division of two overflowing floats are presented. The application of the scheme to hardware and firmware design which requires the allocation of finite memory, as in a digital signal proce...

  16. Mobile probes

    DEFF Research Database (Denmark)

    2016-01-01

    A project investigating the effectiveness of a collection of online resources for teachers' professional development used mobile probes as a data collection method. Teachers received questions and tasks on their mobile in a dialogic manner while in their everyday context as opposed to in an inter......A project investigating the effectiveness of a collection of online resources for teachers' professional development used mobile probes as a data collection method. Teachers received questions and tasks on their mobile in a dialogic manner while in their everyday context as opposed...... to in an interview. This method provided valuable insight into the contextual use, i.e. how did the online resource transfer to the work practice. However, the research team also found that mobile probes may provide the scaffolding necessary for individual and peer learning at a very local (intra-school) community...... level. This paper is an initial investigation of how the mobile probes process proved to engage teachers in their efforts to improve teaching. It also highlights some of the barriers emerging when applying mobile probes as a scaffold for learning....

  17. Development of Mackintosh Probe Extractor

    Science.gov (United States)

    Rahman, Noor Khazanah A.; Kaamin, Masiri; Suwandi, Amir Khan; Sahat, Suhaila; Jahaya Kesot, Mohd

    2016-11-01

    Dynamic probing is a continuous soil investigation technique, which is one of the simplest soil penetration test. It basically consist of repeatedly driving a metal tipped probe into the ground using a drop weight of fixed mass and travel. Testing was carried out continuously from ground level to the final penetration depth. Once the soil investigation work done, it is difficult to pull out the probe rod from the ground, due to strong soil structure grip against probe cone and prevent the probe rod out from the ground. Thus, in this case, a tool named Extracting Probe was created to assist in the process of retracting the probe rod from the ground. In addition, Extracting Probe also can reduce the time to extract the probe rod from the ground compare with the conventional method. At the same time, it also can reduce manpower cost because only one worker involve to handle this tool compare with conventional method used two or more workers. From experiment that have been done we found that the time difference between conventional tools and extracting probe is significant, average time difference is 155 minutes. In addition the extracting probe can reduce manpower usage, and also labour cost for operating the tool. With all these advantages makes this tool has the potential to be marketed.

  18. Synthesizing Accurate Floating-Point Formulas

    OpenAIRE

    Ioualalen, Arnault; Martel, Matthieu

    2013-01-01

    International audience; Many critical embedded systems perform floating-point computations yet their accuracy is difficult to assert and strongly depends on how formulas are written in programs. In this article, we focus on the synthesis of accurate formulas mathematically equal to the original formulas occurring in source codes. In general, an expression may be rewritten in many ways. To avoid any combinatorial explosion, we use an intermediate representation, called APEG, enabling us to rep...

  19. Implementation of Floating-point Coprocessor

    OpenAIRE

    Skogstrøm, Kristian

    2005-01-01

    This thesis presents the architecture and implementation of a high-performance floating-point coprocessor for Atmel's new microcontroller. The coprocessor architecture is based on a fused multiply-add pipeline developed in the specialization project, TDT4720. This pipeline has been optimized significantly and extended to support negation of all operands and single-precision input and output. New hardware has been designed for the decode/fetch unit, the register file, the compare/convert pipe...

  20. Termination of floating-point computations

    OpenAIRE

    Serebrenik, Alexander; De Schreye, Danny

    2005-01-01

    Numerical computations form an essential part of almost any real-world program. Traditional approaches to termination of logic programs are restricted to domains isomorphic to (N,>); more recent works study termination of integer computations where the lack of well-foundedness of the integers has to be taken into account. Termination of computations involving floating-point numbers can be counterintuitive because of rounding errors and implementation conventions. We present a novel technique ...

  1. Floating gate transistors as biosensors (Conference Presentation)

    Science.gov (United States)

    Frisbie, C. Daniel

    2016-11-01

    Electrolyte gated transistors (EGTs) are a sub-class of thin film transistors that are extremely promising for biological sensing applications. These devices employ a solid electrolyte as the gate insulator; the very large capacitance of the electrolyte results in low voltage operation and high transconductance or gain. This talk will describe the fabrication of floating gate EGTs and their use as ricin sensors. The critical performance metrics for EGTs compared with other types of TFTs will also be reviewed.

  2. Ships as future floating farm systems?

    Science.gov (United States)

    Moustafa, Khaled

    2016-09-29

    Environmental and agriculture challenges such as severe drought, desertification, sprawling cities and shrinking arable lands in large regions in the world compel us to think about alternative and sustainable farming systems. Ongoing projects to build floating cities in the sea suggest that building specific ships for farming purposes (as farming ships or farming boats) would also be attainable to introduce new farming surfaces and boost food production worldwide to cope with food insecurity issues.

  3. Floating asphalt blocks of the Dead Sea

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A. (Weizmann Inst. of Science, Rehovot, Israel); Aizenshtat, Z.; Goldberg, M.

    1980-01-01

    Large blocks of mineral matter free (less than 0.1%) asphalt are occasionally found floating on the surface of the Dead Sea. Chemical, spectroscopic and isotopic data are given for the asphalt. The source of the asphalt is not accurately known, but presumably it represents mobilization of heavy viscous asphaltic masses at depth below the lake bottom into the floor of the lake. It may be released to the surface by earth tremors.

  4. Turbomachinery systems for floating production applications

    Energy Technology Data Exchange (ETDEWEB)

    Windt, Jonathan P.; Kurz, Rainer [Solar Turbines Incorporated, San Diego, CA (United States)

    2008-07-01

    Since 1995 there has been a dramatic increase in oil and gas exploration and production using floating platforms in deeper waters located further offshore. This exploration started with tension leg platforms, progressed through SPARs and Semi-Submersibles, and later evolved into Floating Production Storage and Offloading (FPSO) vessels. Turbomachinery equipment installed on a floating platform or vessel will be expected to operate in the same manner as a land based machine, but in a variety of climate and environmental conditions that now includes motion. To operate successfully, specific design considerations for the turbo-machinery packages are required. It is critical to take into account the type of vessel, the expected list, trim and dynamic motion angles, the dynamic forces applied, the expected deck deflection as a result of those forces, understand the applicable class requirement, and where the equipment will be located on the vessel. This information is then translated into the design conditions to determine the type of mounting method to be used to attach the turbo-machinery package to the deck, the expected accelerations for structural analysis, and oil tank and system designs for fluid management. Furthermore, compressor designs need to allow utmost flexibility to adapt to changing operating conditions. (author)

  5. Impact of floats on water

    CERN Document Server

    de Divitiis, Nicola; 10.1017/S002211200200229X

    2009-01-01

    The impact of a wedge-shaped body on the free surface of a weightless inviscid incompressible liquid is considered. Both symmetrical and unsymmetrical entries at constant velocity are dealt with. The differential problem corresponds to the physico-mathematical model of a distribution of potential singularities and, in particular, the flow singularities at the ends of the wetted regions are represented by sinks. A conformal transformation of the flow field is adopted and the unknown intensities of the discontinuities are found by an optimization procedure, together with the solution of the nonlinear free-surface problem. The flow separation at a sideslip is also considered.

  6. Conductivity Probe

    Science.gov (United States)

    2008-01-01

    The Thermal and Electrical Conductivity Probe (TECP) for NASA's Phoenix Mars Lander took measurements in Martian soil and in the air. The needles on the end of the instrument were inserted into the Martian soil, allowing TECP to measure the propagation of both thermal and electrical energy. TECP also measured the humidity in the surrounding air. The needles on the probe are 15 millimeters (0.6 inch) long. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  7. Float processing of high-temperature complex silicate glasses and float baths used for same

    Science.gov (United States)

    Cooper, Reid Franklin (Inventor); Cook, Glen Bennett (Inventor)

    2000-01-01

    A float glass process for production of high melting temperature glasses utilizes a binary metal alloy bath having the combined properties of a low melting point, low reactivity with oxygen, low vapor pressure, and minimal reactivity with the silicate glasses being formed. The metal alloy of the float medium is exothermic with a solvent metal that does not readily form an oxide. The vapor pressure of both components in the alloy is low enough to prevent deleterious vapor deposition, and there is minimal chemical and interdiffusive interaction of either component with silicate glasses under the float processing conditions. Alloys having the desired combination of properties include compositions in which gold, silver or copper is the solvent metal and silicon, germanium or tin is the solute, preferably in eutectic or near-eutectic compositions.

  8. Floating Oil-Spill Containment Device

    Science.gov (United States)

    Jones, Jack A.

    2012-01-01

    Previous oil containment booms have an open top that allows natural gas to escape, and have significant oil leakage due to wave action. Also, a subsea pyramid oil trap exists, but cannot move relative to moving oil plumes from deepsea oil leaks. The solution is to have large, moveable oil traps. One version floats on the sea surface and has a flexible tarp cover and a lower weighted skirt to completely entrap the floating oil and natural gas. The device must have at least three sides with boats pulling at each apex, and sonar or other system to track the slowly moving oil plume, so that the boats can properly locate the booms. The oil trap device must also have a means for removal of the oil and the natural gas. A second design version has a flexible pyramid cover that is attached by lines to ballast on the ocean floor. This is similar to fixed, metal pyramid oil capture devices in the Santa Barbara Channel off the coast of California. The ballast lines for the improved design, however, would have winches that can move the pyramid to always be located above the oil and gas plume. A third design is a combination of the first two. It uses a submerged pyramid to trap oil, but has no anchor and uses boats to locate the trap. It has ballast weights located along the bottom of the tarp and/or at the corners of the trap. The improved floating oil-spill containment device has a large floating boom and weighted skirt surrounding the oil and gas entrapment area. The device is triangular (or more than three sides) and has a flexible tarp cover with a raised gas vent area. Boats pull on the apex of the triangles to maintain tension and to allow the device to move to optimum locations to trap oil and gas. The gas is retrieved from a higher buoyant part of the tarp, and oil is retrieved from the floating oil layer contained in the device. These devices can be operated in relatively severe weather, since waves will break over the devices without causing oil leaking. Also, natural

  9. Influence of Floating Monitoring Platform Structure on the Hydrostatic Characteristics

    Directory of Open Access Journals (Sweden)

    Su Feng

    2015-01-01

    Full Text Available According to the environment and work styles, the underwater monitoring devices can be divided into three type, fixed monitoring device, the floating monitoring device and mobile monitoring device. Floating monitoring platform is a new type of monitoring device of the floating monitoring device, which is mainly used for underwater video monitoring of pool. as the floating platform monitoring in water motion and hydrostatic characteristics are closely related, the influent of counterweight, weight distance and floating body diameter of the structure parameters on its hydrostatic characteristics and the natural periods for roll, pitch and heave should be considered, In this work, the floating body diameter influent most, the counterweight followed, and the structure parameters have different influence on the natural periods for roll, pitch and heave , it need to be analyzed according to the concrete structure parameters.

  10. Pollution Probe.

    Science.gov (United States)

    Chant, Donald A.

    This book is written as a statement of concern about pollution by members of Pollution Probe, a citizens' anti-pollution group in Canada. Its purpose is to create public awareness and pressure for the eventual solution to pollution problems. The need for effective government policies to control the population explosion, conserve natural resources,…

  11. When chromatin organisation floats astray: the Srcap gene and Floating-Harbor syndrome.

    Science.gov (United States)

    Messina, Giovanni; Atterrato, Maria Teresa; Dimitri, Patrizio

    2016-12-01

    Floating-Harbor syndrome (FHS) is a rare human disease characterised by delayed bone mineralisation and growth deficiency, often associated with mental retardation and skeletal and craniofacial abnormalities. FHS was first described at Boston's Floating Hospital 42 years ago, but the causative gene, called Srcap, was identified only recently. Truncated SRCAP protein variants have been implicated in the mechanism of FHS, but the molecular bases underlying the disease must still be elucidated and investigating the molecular defects leading to the onset of FHS remains a challenge. Here we comprehensively review recent work and provide alterative hypotheses to explain how the Srcap truncating mutations lead to the onset of FHS.

  12. Trident: An FPGA Compiler Framework for Floating-Point Algorithms.

    Energy Technology Data Exchange (ETDEWEB)

    Tripp J. L. (Justin L.); Peterson, K. D. (Kristopher D.); Poznanovic, J. D. (Jeffrey Daniel); Ahrens, C. M. (Christine Marie); Gokhale, M. (Maya)

    2005-01-01

    Trident is a compiler for floating point algorithms written in C, producing circuits in reconfigurable logic that exploit the parallelism available in the input description. Trident automatically extracts parallelism and pipelines loop bodies using conventional compiler optimizations and scheduling techniques. Trident also provides an open framework for experimentation, analysis, and optimization of floating point algorithms on FPGAs and the flexibility to easily integrate custom floating point libraries.

  13. Implementing decimal floating-point arithmetic through binary: some suggestions

    OpenAIRE

    Brisebarre, Nicolas; Ercegovac, Milos; Louvet, Nicolas; Martin-Dorel, Erik; Muller, Jean-Michel; Panhaleux, Adrien

    2010-01-01

    International audience; We propose several algorithms and provide some related results that make it possible to implement decimal floating-point arithmetic on a processor that does not have decimal operators, using the available binary floating-point functions. In this preliminary study, we focus on round-to-nearest mode only. We show that several functions in decimal32 and decimal64 arithmetic can be implemented using binary64 and binary128 floating-point arithmetic, respectively. Specifical...

  14. Verification of New Floating Capabilities in FAST v8: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, F.; Robertson, A.; Jonkman, J.; Hayman, G.

    2015-01-01

    In the latest release of NREL's wind turbine aero-hydro-servo-elastic simulation software, FAST v8, several new capabilities and major changes were introduced. FAST has been significantly altered to improve the simulator's modularity and to include new functionalities in the form of modules in the FAST v8 framework. This paper is focused on the improvements made for the modeling of floating offshore wind systems. The most significant change was to the hydrodynamic load calculation algorithms, which are embedded in the HydroDyn module. HydroDyn is now capable of applying strip-theory (via an extension of Morison's equation) at the member level for user-defined geometries. Users may now use a strip-theory-only approach for applying the hydrodynamic loads, as well as the previous potential-flow (radiation/diffraction) approach and a hybrid combination of both methods (radiation/diffraction and the drag component of Morison's equation). Second-order hydrodynamic implementations in both the wave kinematics used by the strip-theory solution and the wave-excitation loads in the potential-flow solution were also added to HydroDyn. The new floating capabilities were verified through a direct code-to-code comparison. We conducted a series of simulations of the International Energy Agency Wind Task 30 Offshore Code Comparison Collaboration Continuation (OC4) floating semisubmersible model and compared the wind turbine response predicted by FAST v8, the corresponding FAST v7 results, and results from other participants in the OC4 project. We found good agreement between FAST v7 and FAST v8 when using the linear radiation/diffraction modeling approach. The strip-theory-based approach inherently differs from the radiation/diffraction approach used in FAST v7 and we identified and characterized the differences. Enabling the second-order effects significantly improved the agreement between FAST v8 and the other OC4 participants.

  15. Structure and fluctuations of a single floating lipid bilayer.

    Science.gov (United States)

    Daillant, J; Bellet-Amalric, E; Braslau, A; Charitat, T; Fragneto, G; Graner, F; Mora, S; Rieutord, F; Stidder, B

    2005-08-16

    A single lipid molecular bilayer of 17 or 18 carbon chain phosphocholines, floating in water near a flat wall, is prepared in the bilayer gel phase and then heated to the fluid phase. Its structure (electron density profile) and height fluctuations are determined by using x-ray reflectivity and non-specular scattering. By fitting the off-specular signal to that calculated for a two-dimensional membrane using a Helfrich Hamiltonian, we determine the three main physical quantities that govern the bilayer height fluctuations: The wall attraction potential is unexpectedly low; the surface tension, roughly independent on chain length and temperature, is moderate (approximately 5 x 10(-4) J.m(-2)) but large enough to dominate the intermediate range of the fluctuation spectrum; and the bending modulus abruptly decreases by an order-of-magnitude from 10(-18) J to 10(-19) J at the bilayer gel-to-fluid transition.

  16. Statistical analysis of the metrological properties of float glass

    Science.gov (United States)

    Yates, Brian W.; Duffy, Alan M.

    2008-08-01

    The radius of curvature, slope error, surface roughness and associated height distribution and power spectral density of uncoated commercial float glass samples have been measured in our Canadian Light Source Optical Metrology Facility, using our Micromap-570 surface profiler and long trace profilometer. The statistical differences in these parameters have been investigated between the tin and air sides of float glass. The effect of soaking the float glass in sulfuric acid to try to dissolve the tin contamination has also been investigated, and untreated and post-treatment surface roughness measurements compared. We report the results of our studies on these float glass samples.

  17. FORMULATION AND EVALUATION OF FLOATING TABLETS OF NORFLOXACIN

    Directory of Open Access Journals (Sweden)

    Ms. Jyoti Rathore

    2015-01-01

    Full Text Available The oral route is considered as the most promising route of drug delivery. Several approaches have been attempted in the preparation of gastro-retentive drug delivery systems. These include floating systems, swell able and expandable systems, high density systems, bioadhesive systems, altered shape systems, gel forming solution or suspension systems and sachet systems. Various approaches have been followed to encourage gastric retention of an oral dosage form. Floating systems have low bul density so that they can float on the gastric juice in the stomach. The problem arises when the stomach is completely emptied of gastric fluid. In such a situation, there is nothing to float on.

  18. Herbal carrier-based floating microparticles of diltiazem ...

    African Journals Online (AJOL)

    Various physicochemical properties of the floating microspheres were characterized, including ... Keywords: Diltiazem, Cardiac disease, Psyllium husk, Sodium alginate, Microsphere, Microparticle,. Controlled ..... solvent removal methods.

  19. Influence of artificial ecological floating beds on river hydraulic characteristics

    Institute of Scientific and Technical Information of China (English)

    饶磊; 钱进; 敖燕辉

    2014-01-01

    The artificial ecological floating bed is widely used in rivers and lakes to repair and purify polluted water. However, the water flow pattern and the water level distribution are significantly changed by the floating beds, and the influence on the water flow is different from that of aquatic plants. In this paper, based on the continuous porous media model, a moveable two-layer combination model is built to describe the floating bed. The influences of the floating beds on the water flow characteristics are studied by numerical simulations and experiments using an experimental water channel. The variations of the water level distribution are discussed under conditions of different flow velocities ( v=0.1 m/s, 0.2 m/s, 0.30 m/s, 0.4 m/s), floating bed coverage rates (20%, 40%, 60%) and arrangement positions away from the channel wall ( D=0 m, 0.1 m, 0.2 m). The results indicate that the flow velocity increases under the floating beds, and the water level rises significantly under high flow velocity conditions in the upstream region and the floating bed region. In addition, the average rising water level value (ARWLV) increases significantly with the increase of the floating bed coverage rate, and the arrangement position of floating beds in the river can also greatly influence the water level distribution under a high-flow velocity condition (v³0.2 m/s) .

  20. [The Mechanism of Free-Floating Discussion in a Psychiatric/Mental Health Nursing Supervisory Group].

    Science.gov (United States)

    Chiang, Hsien-Hsien

    2015-06-01

    Although the free-floating discussion format is widely used in group therapy, the application of this format in the context of supervisory groups has yet to be clarified. The purpose of this study was to explore the mechanisms involved in facilitating and learning the free-floating discussion format in a supervisory group. A phenomenological approach was used to investigate the group content and personal feedback of a psychiatric-nurse supervisory group. The group held on 12 sessions. Each session was conducted once weekly and lasting 150 minutes. The findings identified the functions of free-floating discussions in the context of supervisory groups as: embodied interaction and initiation by handling. Embodied interaction included: reflection on the experience of the other, sense of body, and present action. Initiation by handling included: facilitating the self-narrative, following the lead of the group, and reflecting in accordance with the group. The role of the facilitator is to parallel process rather than to lead in order to produce practical wisdom. Free-floating discussion and self-evidence from initiation by handling has the potential to promote spontaneity, creativity, and self-confidence in clinical practice and to promote deep learning.

  1. PREPARATION AND CHARACTERIZATION OF CINNARIZINE FLOATING OIL ENTRAPPED CALCIUM ALGINATE BEADS

    Directory of Open Access Journals (Sweden)

    Mowafaq M. Ghareeb et al.

    2012-02-01

    Full Text Available Gastroretentive delivery systems can be retained in the stomach and assist in improving absorption and consequently the bioavailability of drug that has a narrow absorption window in a particular region of gastrointestinal tract. A floatable multiparticulate system with potential for intragastric sustained delivery is one of the approaches to get the gastroretention. Cinnarizine(CNZ, an antihistaminic drug used in vertigo caused by meniere’s disease was taken as a model drug for floating beads prepared by non effervescent method. Floating CNZ olive oil-entrapped emulsion gel beads were prepared by the emulsion–gelation method. Different concentrations of sodium alginate (1%, 2%, and 3% w/v, oil (5%, 10%, and 15% v/v, and calcium chloride (0.02, 0.1, and 0.5M were used and their influence on beads uniformity, buoyancy, and in vitro drug release was studied. The results indicated that retardation of drug release was achieved by the oil hydrophobic diffusion barrier, especially in the presence of the compact network of alginate beads. The selected formula of calcium alginate beads using 3% w/v sodium alginate, 15% v/v oil and 0.1 M calcium chloride, showed a higher similarity factor (f2 =70.1 of CNZ release in comparison to release from standard gastroretentive sustained release floating cinnarizine tablet with good floating over duration of more than 12 hours.

  2. Seven centuries of atmospheric Pb deposition recorded in a floating mire from Central Italy

    Science.gov (United States)

    Zaccone, Claudio; Lobianco, Daniela; D'Orazio, Valeria; Miano, Teodoro M.; Shotyk, William

    2016-04-01

    -1650. Lead concentrations were normalized to those of Th, a conservative, lithophile element often used as an indicator of the abundance of mineral particles. Crustal enrichment factor values, calculated by normalizing the Pb/Th ratio in peat samples to the corresponding ratio for the Upper Continental Crust, clearly show that almost all the Pb reaching this floating isle in the last seven centuries is of anthropogenic origin. In particular, while the big peak around 100-115 cm of depth is associated with that of Sb, the band around 300 cm characterized also the trend of several other major and trace elements (i.e., Ag, Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sr, Th, Tl, U, V, Y, Zn) with the exception of Sb. Although γ-spectrometry measurement (210Pb, 137Cs and 241Am) for the first 100 cm of this core is still on-going, at the best of our knowledge, this work may provide the first Pb chronology obtained from a (4 m) deep floating mire. Furthermore, it is to note that a) this floating mire could consist of the southernmost European population of Sphagnum, and b) this core shows a great potential to be used as archive of environmental changes, especially considering its high resolution (1 cm = 0.5 yr in the first 100 cm, and 2-2.5 yrs in the remaining 300 cm of depth). The Authors thank the Municipality of Posta Fibreno, Managing Authority of the Regional Natural Reserve of Lake Posta Fibreno, for allowing peat cores sampling.

  3. Redox Probing Study of the Potential Dependence of Charge Transport Through Li2O2

    DEFF Research Database (Denmark)

    Knudsen, Kristian Bastholm; Luntz, Alan C.; Jensen, Søren Højgaard;

    2015-01-01

    -of-the-art Liion technologies and the demand placed on batteries by technologies such as electrical vehicles. Here we present a redox probing study of the charge transfer across the main deposition product lithium peroxide, Li2O2, in the Li−O2 battery using outer-sphere redox shuttles. The change in heterogeneous...

  4. Potential of floating production for delta and coastal cities

    NARCIS (Netherlands)

    K.M. Czapiewska; B. Dal Bo Zanon; B. Roeffen; P.R. Mooij; Dr. ing Rutger de Graaf

    2017-01-01

    The disruption of nutrient cycles caused by human activities such as agriculture and burning fossil fuels is impacting ecosystem services on global and local scales. The increasing concentration of carbon dioxide in the atmosphere contributes to rising global temperatures and ocean acidification,

  5. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Science.gov (United States)

    2010-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  6. Floating air riding seal for a turbine

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, Todd A

    2016-08-16

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

  7. An integrated circuit floating point accumulator

    Science.gov (United States)

    Goldsmith, T. C.

    1977-01-01

    Goddard Space Flight Center has developed a large scale integrated circuit (type 623) which can perform pulse counting, storage, floating point compression, and serial transmission, using a single monolithic device. Counts of 27 or 19 bits can be converted to transmitted values of 12 or 8 bits respectively. Use of the 623 has resulted in substantial savaings in weight, volume, and dollar resources on at least 11 scientific instruments to be flown on 4 NASA spacecraft. The design, construction, and application of the 623 are described.

  8. Rounding in redundant digit floating point system

    Science.gov (United States)

    Fahmy, Hossam A. H.; Flynn, Michael J.

    2003-12-01

    Redundant representations are used to increase the performance of arithmetic units. If redundancy is eliminated, the bits needed to represent a number may increase or decrease depending on the type of redundancy used. In such a redundant representation, finding the exact location and correct decision for rounding without eliminating the redundancy or loosing its performance gains is difficult. This paper discusses the different issues related to rounding in redundant systems. It also presents a solution that was used to maintain the gains of redundancy in a floating point unit while correctly implementing the IEEE rounding modes.

  9. Wave attenuation charcteristics of tethered float system

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.

    with increase 04 0.8 I 0.9 I.‘0 I!1 I 1.2 I 1.3 11.4 11.5 I!6 1.7 R(m)- Fig 7 (a). Variation of wave power and drag power with float size. t t 0 I I I I I I I I I 2 X-x /x-x-x--* Q) a- aD d x/x’ b 0- X’ (D y/ u) 6 t, 0 IQ_ d :- ? 0 9, 0...

  10. Floating Foundations for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Andersen, Morten Thøtt

    The concept of harnessing the power of the wind dates all the way back to the first ships traversing the seas. Later, windmills enabled the use of wind power for industrial purposes. Since then, technology has allowed the production of clean renewable energy through the use of wind turbines......-scale prototypes to full-scale pre-commercial wind parks. This thesis explores different aspects of numerical and physical modeling of floating offshore wind turbines. Numerical investigations, validated by physical test data, are used to highlight some of the implications of modeling these highly coupled aero...

  11. Evaluating the Cost, Safety, and Proliferation Risks of Small Floating Nuclear Reactors.

    Science.gov (United States)

    Ford, Michael J; Abdulla, Ahmed; Morgan, M Granger

    2017-01-17

    It is hard to see how our energy system can be decarbonized if the world abandons nuclear power, but equally hard to introduce the technology in nonnuclear energy states. This is especially true in countries with limited technical, institutional, and regulatory capabilities, where safety and proliferation concerns are acute. Given the need to achieve serious emissions mitigation by mid-century, and the multidecadal effort required to develop robust nuclear governance institutions, we must look to other models that might facilitate nuclear plant deployment while mitigating the technology's risks. One such deployment paradigm is the build-own-operate-return model. Because returning small land-based reactors containing spent fuel is infeasible, we evaluate the cost, safety, and proliferation risks of a system in which small modular reactors are manufactured in a factory, and then deployed to a customer nation on a floating platform. This floating small modular reactor would be owned and operated by a single entity and returned unopened to the developed state for refueling. We developed a decision model that allows for a comparison of floating and land-based alternatives considering key International Atomic Energy Agency plant-siting criteria. Abandoning onsite refueling is beneficial, and floating reactors built in a central facility can potentially reduce the risk of cost overruns and the consequences of accidents. However, if the floating platform must be built to military-grade specifications, then the cost would be much higher than a land-based system. The analysis tool presented is flexible, and can assist planners in determining the scope of risks and uncertainty associated with different deployment options.

  12. Surface modification of poly(dimethylsiloxane) (PDMS) microchannels with DNA capture-probes for potential use in microfluidic DNA analysis systems

    Science.gov (United States)

    Khodakov, Dmitriy A.; Thredgold, Leigh D.; Lenehan, Claire E.; Andersson, Gunther A.; Kobus, Hilton; Ellis, Amanda V.

    2011-12-01

    Poly(dimethylsiloxane) (PDMS) is an elastomeric material used for microfluidic devices and is especially suited to medical and forensic applications. This is due to its relatively low cost, ease of fabrication, excellent optical transmission characteristics and its ability to support electroosmotic flow, required during electrophoretic separations. These aspects combined with its large range of surface modification chemistries, make PDMS an attractive substrate in microfluidic devices for, in particular, DNA separation. Here, we report the successful wet chemical surface modification of PDMS microchannels using a simple three step method to produce an isothiocyanate-terminated surface. Initially, PDMS was oxygen plasma treated to produce a silanol-terminated surface, this was then reacted with 3-aminopropyltriethoxysilane with subsequent reaction of the now amine-terminated surface with p-phenylenediisothiocyanate. Water contact angle measurements both before and after modification showed a reduction in hydrophobicity from 101o for native PDMS to 94o for the isothiocyante-terminated PDMS. The isothiocyanate-terminated surface was then coupled with an amineterminated single-stranded DNA (ssDNA) oligonucleotide capture probe via a thiourea linkage. Confirmation of capture probe attachment was observed using fluorescent microscopy after hybridization of the capture probes with fluorescently labeled complimentary ssDNA oligonucleotides.

  13. Monitoring of the proton electrochemical gradient in reconstituted vesicles: quantitative measurements of both transmembrane potential and intravesicular pH by ratiometric fluorescent probes.

    Science.gov (United States)

    Holoubek, Ales; Vecer, Jaroslav; Sigler, Karel

    2007-03-01

    Proteoliposomes carrying reconstituted yeast plasma membrane H(+)-ATPase in their lipid membrane or plasma membrane vesicles are model systems convenient for studying basic electrochemical processes involved in formation of the proton electrochemical gradient (Deltamicro(H) (+)) across the microbial or plant cell membrane. Deltapsi- and pH-sensitive fluorescent probes were used to monitor the gradients formed between inner and outer volume of the reconstituted vesicles. The Deltapsi-sensitive fluorescent ratiometric probe oxonol VI is suitable for quantitative measurements of inside-positive Deltapsi generated by the reconstituted H(+)-ATPase. Its Deltapsi response can be calibrated by the K(+)/valinomycin method and ratiometric mode of fluorescence measurements reduces undesirable artefacts. In situ pH-sensitive fluorescent probe pyranine was used for quantitative measurements of pH inside the proteoliposomes. Calibration of pH-sensitive fluorescence response of pyranine entrapped inside proteoliposomes was performed with several ionophores combined in order to deplete the gradients passively formed across the membrane. Presented model system offers a suitable tool for simultaneous monitoring of both components of the proton electrochemical gradient, Deltapsi and DeltapH. This approach should help in further understanding how their formation is interconnected on biomembranes and even how transport of other ions is combined to it.

  14. A laboratory study of floating lenticular anticyclones

    Science.gov (United States)

    Le Gal, Patrice; de La Rosa, Hector; Cros, Anne; Cruz-Gomez, Raúl; Le Bars, Michael

    2014-11-01

    Oceanic vortices play an important role in the redistribution of heat, salt and momentum in the oceans. Among these vortices, floating lenses or rings are often met in the meanders of warm currents. For instance the North Brazil Current rings are among the most intense and large anticyclonic vortices on Earth. In order to better describe these vortices, we propose here a laboratory study of these floating anticyclonic lenses. A blob of fresh water is slowly injected near the surface of a rotating layer of homogeneous salted water. Because of the opposite effects of rotation that tends to generate columnar structures and density stratification that spreads light water on the surface, the vortices take a finite size three dimensionnal typical shape. Visualization and PIV measurements of the shape, aspect ratios and vorticity profiles are compared to analytical predictions that use first a simple solid body rotation model and then a more realistic isolated Gaussian vorticity field inside the anticyclones. This work was carried out within the framework of a bilateral cooperation between CNRS (France) and CONACYT (Mexico).

  15. Floating treatment wetlands for domestic wastewater treatment.

    Science.gov (United States)

    Faulwetter, J L; Burr, M D; Cunningham, A B; Stewart, F M; Camper, A K; Stein, O R

    2011-01-01

    Floating islands are a form of treatment wetland characterized by a mat of synthetic matrix at the water surface into which macrophytes can be planted and through which water passes. We evaluated two matrix materials for treating domestic wastewater, recycled plastic and recycled carpet fibers, for chemical oxygen demand (COD) and nitrogen removal. These materials were compared to pea gravel or open water (control). Experiments were conducted in laboratory scale columns fed with synthetic wastewater containing COD, organic and inorganic nitrogen, and mineral salts. Columns were unplanted, naturally inoculated, and operated in batch mode with continuous recirculation and aeration. COD was efficiently removed in all systems examined (>90% removal). Ammonia was efficiently removed by nitrification. Removal of total dissolved N was ∼50% by day 28, by which time most remaining nitrogen was present as NO(3)-N. Complete removal of NO(3)-N by denitrification was accomplished by dosing columns with molasses. Microbial communities of interest were visualized with denaturing gradient gel electrophoresis (DGGE) by targeting specific functional genes. Shifts in the denitrifying community were observed post-molasses addition, when nitrate levels decreased. The conditioning time for reliable nitrification was determined to be approximately three months. These results suggest that floating treatment wetlands are a viable alternative for domestic wastewater treatment.

  16. High-Rate Capable Floating Strip Micromegas

    CERN Document Server

    Bortfeldt, Jonathan; Biebel, Otmar; Danger, Helge; Flierl, Bernhard; Hertenberger, Ralf; Lösel, Philipp; Moll, Samuel; Parodi, Katia; Rinaldi, Ilaria; Ruschke, Alexander; Zibell, André

    2015-01-01

    We report on the optimization of discharge insensitive floating strip Micromegas (MICRO-MEsh GASeous) detectors, fit for use in high-energy muon spectrometers. The suitability of these detectors for particle tracking is shown in high-background environments and at very high particle fluxes up to 60MHz/cm$^2$. Measurement and simulation of the microscopic discharge behavior have demonstrated the excellent discharge tolerance. A floating strip Micromegas with an active area of 48cm$\\times$50cm with 1920 copper anode strips exhibits in 120GeV pion beams a spatial resolution of 50$\\mu$m at detection efficiencies above 95%. Pulse height, spatial resolution and detection efficiency are homogeneous over the detector. Reconstruction of particle track inclination in a single detector plane is discussed, optimum angular resolutions below $5^\\circ$ are observed. Systematic deviations of this $\\mu$TPC-method are fully understood. The reconstruction capabilities for minimum ionizing muons are investigated in a 6.4cm$\\time...

  17. Externalities, Floating Population and Spatial Agglomeration

    Institute of Scientific and Technical Information of China (English)

    Du Yu; Wang Chuansheng; Fan Jie

    2007-01-01

    With the further development of socialist market economy,the mobility of factor markets in China,especially the labor market.is strengthened.Extemalities interacts with the agglomeration of productive factors.Under the framework of new economic geographg this article presents a theoretical model involving the endogenous population density affected by urban externalities.Results show that the population density is more concentrated around the center because the degree and extent of interaction between individuals intensifies when the distance from the center decreases.When there are several extemalifies resonurces,the aggregation of externalities changes the configuration of spatial factor allocation.These results fit well with the empirical facts about the decreasing density of floating population along the cities of Guangzhou,Dongguan and Shenzhen in Guangdong Province which is situat d in the eastern coast of the Pearl River Delta.We find that under the impacts of externalities released from Hong Kong into the coast,floating population Was more concentrated around Shenzhen and Dongguan,which are more adjacent to Hong Kong compared with Guangzhou City.

  18. Treatment of Floating Knee Injury in Children

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The necessity and superiority of the surgical operation on children with floating knee injury and the fracture union and complications were investigated. Twenty-eight children with floating knee injury were subjected to open reduction and internal fixation or external fixator. The patients were followed up for 18 months to 7 years. The curative effectiveness was scored by Karlstrom criteria. The results showed that no nonunion or deformity was found. The affected limb was 1.2 cm to 1.5 cm longer in 2 cases, 0.8 to 1.2 cm shorter in 3 cases than the contralateral. No severe dysfunction of knee joint occurred. The excellent-good rate was 92.8 % and the curative rate 71.4 % respectively. So for children whose age is older than 5 years, it's a good way to treat the fractures of femur and tibia with open reduction and internal fixation or external fixator. The method can be advantageous for the nursing care, early function recovery, shortening of the hospital stay and avoidance of severe complications.

  19. 40 CFR 63.1043 - Standards-Separator floating roof.

    Science.gov (United States)

    2010-07-01

    ...) National Emission Standards for Oil-Water Separators and Organic-Water Separators § 63.1043 Standards... controlling air emissions from an oil-water separator or organic-water separator using a floating roof. (b... floating roof shall be equipped with two continuous seals, one above the other, between the wall of...

  20. FPGA Based Quadruple Precision Floating Point Arithmetic for Scientific Computations

    Directory of Open Access Journals (Sweden)

    Mamidi Nagaraju

    2012-09-01

    Full Text Available In this project we explore the capability and flexibility of FPGA solutions in a sense to accelerate scientific computing applications which require very high precision arithmetic, based on IEEE 754 standard 128-bit floating-point number representations. Field Programmable Gate Arrays (FPGA is increasingly being used to design high end computationally intense microprocessors capable of handling floating point mathematical operations. Quadruple Precision Floating-Point Arithmetic is important in computational fluid dynamics and physical modelling, which require accurate numerical computations. However, modern computers perform binary arithmetic, which has flaws in representing and rounding the numbers. As the demand for quadruple precision floating point arithmetic is predicted to grow, the IEEE 754 Standard for Floating-Point Arithmetic includes specifications for quadruple precision floating point arithmetic. We implement quadruple precision floating point arithmetic unit for all the common operations, i.e. addition, subtraction, multiplication and division. While previous work has considered circuits for low precision floating-point formats, we consider the implementation of 128-bit quadruple precision circuits. The project will provide arithmetic operation, simulation result, hardware design, Input via PS/2 Keyboard interface and results displayed on LCD using Xilinx virtex5 (XC5VLX110TFF1136 FPGA device.

  1. Comments on the floating body and the hyperplane conjecture

    CERN Document Server

    Fresen, Daniel

    2011-01-01

    We provide upper and lower bounds on the logarithmic Hausdorff distance between an arbitrary convex body $K\\subset \\mathbb{R}^{d}$\\ and the convex floating body $K_{\\delta}$ inside $K$. We also discuss the hyperplane conjecture (the slicing problem) and provide a reformulation of this famous unsolved mystery in terms of the floating body.

  2. Equilibrium of a magnet floating above a superconducting disk

    Science.gov (United States)

    Williams, Richard; Matey, J. R.

    1988-02-01

    A superconducting body will repel a nearby magnet. The repulsion is due to the perfect diamagnetism resulting from the Meissner effect. A small magnet will float above a superconducting disk at an equilibrium position over the disk center, stable against lateral displacements. It is not intuitively obvious why the potential energy of the magnet over a flat disk should have a minimum at the center, rather than a maximum. We have measured the properties of the attractive potential well of a YBa2Cu3O7 disk by two experiments. In the first, we use a low-frequency magnetic field, 0-100 Hz, to excite oscillations of a small, freely levitating bar magnet about its equilibrium position. We find sharp resonances, corresponding to longitudinal, transverse, and torsional modes of oscillation. The frequencies of these resonances define the properties near the bottom of the potential well. In the second experiment, we attach the magnet to a vertical glass fiber of known stiffness. The magnet is suspended horizontally a small known distance, z, above the superconducting disk. By moving the magnet from the center of the disk to the edge and measuring the bending of the support fiber as a function of position we determine the shape of the potential curve for large displacements and the total energy needed to escape from the well.

  3. Balloon Pump with Floating Valves for Portable Liquid Delivery

    Directory of Open Access Journals (Sweden)

    Yuya Morimoto

    2016-03-01

    Full Text Available In this paper, we propose a balloon pump with floating valves to control the discharge flow rates of sample solutions. Because the floating valves were made from a photoreactive resin, the shapes of the floating valves could be controlled by employing different exposure patterns without any change in the pump configurations. Owing to the simple preparation process of the pump, we succeeded in changing the discharge flow rates in accordance with the number and length of the floating valves. Because our methods could be used to easily prepare balloon pumps with arbitrary discharge properties, we achieved several microfluidic operations by the integration of the balloon pumps with microfluidic devices. Therefore, we believe that the balloon pump with floating valves will be a useful driving component for portable microfluidic systems.

  4. Electrowetting in a water droplet with a movable floating substrate

    Science.gov (United States)

    Shahzad, Amir; Masud, A. R.; Song, Jang-Kun

    2016-05-01

    Electrowetting (EW) enables facile manipulation of a liquid droplet on a hydrophobic surface. In this study, manipulation of an electrolyte droplet having a small floating object on it was investigated on a solid hydrophobic substrate under the EW process. Herein, the floating object exhibited a vertical motion under an applied electric field owing to the spreading and contraction of the droplet on its connecting substrates. The field-induced height variation of the floating object was significantly influenced by the thicknesses of the dielectric and hydrophobic materials. A small mass was also placed on the top floating object and its effect on the spreading of the droplet was observed. In this system, the height of the top floating object is precisely controllable under the application of an electric voltage. The proposed system is expected to be highly useful in the design of nano- and micro-oscillatory systems for microengineering.

  5. FORMULATION AND EVALUATION OF EFFERVESCENT GASTRO-RETENTIVE FLOATING TABLETS FOR CONTROLLED RELEASE OF AN ANTI-ULCER COMPOUND

    Directory of Open Access Journals (Sweden)

    Aleksandar Aleksovski

    2013-02-01

    Full Text Available Effervescent floating gastro-retentive matrix tablets present novel and promising approach towards targeted and controlled drug delivery in the stomach and in the upper part of the small intestine. This kind of dosage form could be obtained by combining in a suitable ratio effervescent compounds and hydrophilic/hydrophobic polymer/s. The aim of our investigation was to develop controlled release effervescent matrix tablet which will float over the gastric media for longer than 8 hours and will release the active compound in a continuous manner over 8 hours period. We used ranitidine HCl as a model drug which has narrow absorption window in the upper small intestine, and is a good candidate for this type of dosage forms. We employed sodium bicarbonate and citric acid as effervescent compounds and two different types of hydroxypropyl methylcellulose (HPMC K4M and HPMC K15M as a controlled release hydrophilic polymer. Three batches of tablets were produced (one containing HPMC K4M, other containing HPMC K15M, and the third containing 1:1 mixture of these two polymers and every batch was compressed with two different forces 5.5 kN and 4.7 kN, so completely six probes of tablets were made. All six probes complied the pharmacopoeial requirements concerning mass uniformity, content, friability and hardness. All six probes tended to float fast to the surface of the medium and tend to hydrate and swell fast enough which actions provided controlled release of the compound over period of 8 hours. No significant differences in the dissolution profiles of all six probes were noticed during the investigation.

  6. Approaches for drug delivery with intracortical probes.

    Science.gov (United States)

    Spieth, Sven; Schumacher, Axel; Trenkle, Fabian; Brett, Olivia; Seidl, Karsten; Herwik, Stanislav; Kisban, Sebastian; Ruther, Patrick; Paul, Oliver; Aarts, Arno A A; Neves, Hercules P; Rich, P Dylan; Theobald, David E; Holtzman, Tahl; Dalley, Jeffrey W; Verhoef, Bram-Ernst; Janssen, Peter; Zengerle, Roland

    2014-08-01

    Intracortical microprobes allow the precise monitoring of electrical and chemical signaling and are widely used in neuroscience. Microelectromechanical system (MEMS) technologies have greatly enhanced the integration of multifunctional probes by facilitating the combination of multiple recording electrodes and drug delivery channels in a single probe. Depending on the neuroscientific application, various assembly strategies are required in addition to the microprobe fabrication itself. This paper summarizes recent advances in the fabrication and assembly of micromachined silicon probes for drug delivery achieved within the EU-funded research project NeuroProbes. The described fabrication process combines a two-wafer silicon bonding process with deep reactive ion etching, wafer grinding, and thin film patterning and offers a maximum in design flexibility. By applying this process, three general comb-like microprobe designs featuring up to four 8-mm-long shafts, cross sections from 150×200 to 250×250 µm², and different electrode and fluidic channel configurations are realized. Furthermore, we discuss the development and application of different probe assemblies for acute, semichronic, and chronic applications, including comb and array assemblies, floating microprobe arrays, as well as the complete drug delivery system NeuroMedicator for small animal research.

  7. Wearable probes for service design

    DEFF Research Database (Denmark)

    Mullane, Aaron; Laaksolahti, Jarmo Matti; Svanæs, Dag

    2014-01-01

    by service employees in reflecting on the delivery of a service. In this paper, we present the ‘wearable probe’, a probe concept that captures sensor data without distracting service employees. Data captured by the probe can be used by the service employees to reflect and co-reflect on the service journey......Probes are used as a design method in user-centred design to allow end-users to inform design by collecting data from their lives. Probes are potentially useful in service innovation, but current probing methods require users to interrupt their activity and are consequently not ideal for use......, helping to identify opportunities for service evolution and innovation....

  8. A study of rotor and platform design trade-offs for large-scale floating vertical axis wind turbines

    Science.gov (United States)

    Griffith, D. Todd; Paquette, Joshua; Barone, Matthew; Goupee, Andrew J.; Fowler, Matthew J.; Bull, Diana; Owens, Brian

    2016-09-01

    Vertical axis wind turbines are receiving significant attention for offshore siting. In general, offshore wind offers proximity to large populations centers, a vast & more consistent wind resource, and a scale-up opportunity, to name a few beneficial characteristics. On the other hand, offshore wind suffers from high levelized cost of energy (LCOE) and in particular high balance of system (BoS) costs owing to accessibility challenges and limited project experience. To address these challenges associated with offshore wind, Sandia National Laboratories is researching large-scale (MW class) offshore floating vertical axis wind turbines (VAWTs). The motivation for this work is that floating VAWTs are a potential transformative technology solution to reduce offshore wind LCOE in deep-water locations. This paper explores performance and cost trade-offs within the design space for floating VAWTs between the configurations for the rotor and platform.

  9. The effect of Taurolidine on adherent and floating subpopulations of melanoma cells.

    Science.gov (United States)

    Shrayer, D P; Lukoff, H; King, T; Calabresi, P

    2003-04-01

    The annual incidence of malignant melanoma is estimated at 10-12 per 100000 inhabitants in countries of Central Europe and the US, with more recent estimates showing a dramatic upward trend. Taurolidine (Carter/Wallace, Cranberry, NJ) is a novel, potentially effective, antitumor chemotherapeutic agent. We hypothesized that Taurolidine could inhibit the growth, induce apoptosis, affect the cell cycle and change morphology of melanoma cells. We expected this process to be different in adherent and floating subpopulations that may be reflective of solid tumors and their metastases. Analysis of MNT-1 human and B16F10 murine melanoma cells showed that at 72 h the IC(50) of Taurolidine was 25.4+/-3.3 microM for MNT-1 human melanoma cells and 30.9+/-3.6 microM for B16F10 murine melanoma cells. Taurolidine induced DNA fragmentation of melanoma cells in a dose-dependent manner. Taurolidine (75 and 100 microM) induced 52-97% Annexin-V binding (apoptosis), respectively. Evaluation of cell cycle after 72 h exposure to Taurolidine (0-100 microM) revealed that the percentage of melanoma cells in S phase increased from 27 to 40% in the adherent subpopulation and from 33 to 49% in the floating subpopulation. Phase contrast microscopy revealed a marked swelling of melanoma cells and decreasing cell numbers in adherent subpopulation starting at 24 h with 25 microM Taurolidine. Shrinkage of cells dominated at 75-100 microM Taurolidine. Using Cytospin assay in the floating population, we observed swelling of melanoma cells induced by 25-100 micro Taurolidine and appearance of giant (multinuclear) forms resulting from exposure to 75-100 micro Taurolidine. Some floating cells with normal morphology were observed with low concentrations of Taurolidine (0-25 microM). These data show that effects of Taurolidine may be different in adherent and floating subpopulations of melanoma cells. More importantly, floating subpopulations that may contain some viable melanoma cells, may be reflective

  10. Clustering of floating particles in stratified turbulence

    Science.gov (United States)

    Boffetta, Guido; de Lillo, Filippo; Musacchio, Stefano; Sozza, Alessandro

    2016-11-01

    We study the dynamics of small floating particles transported by stratified turbulence in presence of a mean linear density profile as a simple model for the confinement and the accumulation of plankton in the ocean. By means of extensive direct numerical simulations we investigate the statistical distribution of floaters as a function of the two dimensionless parameters of the problem. We find that vertical confinement of particles is mainly ruled by the degree of stratification, with a weak dependency on the particle properties. Conversely, small scale fractal clustering, typical of non-neutral particles in turbulence, depends on the particle relaxation time and is only weakly dependent on the flow stratification. The implications of our findings for the formation of thin phytoplankton layers are discussed.

  11. Near shore floating oscillating wave column

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Three different types of floating buoys, using oscillating wave columns, have been considered for generating electric power in an Atlantic environment. The study considered the situation close to the shore, but in the ultimate it was hoped to deploy units offshore. Although other designs would have greater power capture efficiency, the Spar Buoy was studied in greatest depth as it was expected to have the edge in terms of building cost and operating economics. A risk assessment was carried out for both concrete and steel buoys. The report covers (1) history of the project development; (2) project definition; (3) power generation and sensitivities and (4) lessons learned. The study was sponsored by Great Britain's DTI.

  12. UFO: "Unidentified" Floating Object Driven by Thermocapillarity

    CERN Document Server

    Zhao, Yuejun

    2010-01-01

    In this fluid dynamics video, we show thermocapillary actuation of a binary drop of water and heptanol where the binary drop in motion takes on a UFO-like shape. On a parylene-coated silicon surface subjected to a linear temperature gradient, a pure heptanol droplet quickly moves to the cold side by the Marangoni stress, while a pure water droplet remains stuck due to a large contact angle hysteresis. When the water droplet was encapsulated by a thin layer of heptanol and thermally actuated, the binary droplet takes on a peculiar shape resembling an UFO, i.e. an "unidentified" floating object as the mechanism is not yet completely understood. Our finding suggests that pure liquid droplets (e.g. aqueous solutions) that are not conducive to thermocapillary actuation can be made so by encapsulating them with another judiciously chosen liquid (e.g. heptanol).

  13. Nuclear Security for Floating Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Skiba, James M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scherer, Carolynn P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-13

    Recently there has been a lot of interest in small modular reactors. A specific type of these small modular reactors (SMR,) are marine based power plants called floating nuclear power plants (FNPP). These FNPPs are typically built by countries with extensive knowledge of nuclear energy, such as Russia, France, China and the US. These FNPPs are built in one country and then sent to countries in need of power and/or seawater desalination. Fifteen countries have expressed interest in acquiring such power stations. Some designs for such power stations are briefly summarized. Several different avenues for cooperation in FNPP technology are proposed, including IAEA nuclear security (i.e. safeguards), multilateral or bilateral agreements, and working with Russian design that incorporates nuclear safeguards for IAEA inspections in non-nuclear weapons states

  14. Analysis of Switched-Rigid Floating Oscillator

    Directory of Open Access Journals (Sweden)

    Prabhakar R. Marur

    2009-01-01

    Full Text Available In explicit finite element simulations, a technique called deformable-to-rigid (D2R switching is used routinely to reduce the computation time. Using the D2R option, the deformable parts in the model can be switched to rigid and reverted back to deformable when needed during the analysis. The time of activation of D2R however influences the overall dynamics of the system being analyzed. In this paper, a theoretical basis for the selection of time of rigid switching based on system energy is established. A floating oscillator problem is investigated for this purpose and closed-form analytical expressions are derived for different phases in rigid switching. The analytical expressions are validated by comparing the theoretical results with numerical computations.

  15. Capillary self-assembly of floating bodies

    Science.gov (United States)

    Jung, Sunghwan; Thompson, Paul; Bush, John

    2007-11-01

    We study the self-assembly of bodies supported on the water surface by surface tension. Attractive and repulsive capillary forces exist between menisci of, respectively, the same and opposite signs. In nature, floating objects (e.g. mosquito larvae) thus interact through capillary forces to form coherent packings on the water surface. We here present the results of an experimental investigation of such capillary pattern formation. Thin elliptical metal sheets were designed to have variable shape, flexibility and mass distribution. On the water surface, mono-, bi-, or tri-polar menisci could thus be achieved. The influence of the form of the menisci on the packings arising from the interaction of multiple floaters is explored. Biological applications are discussed.

  16. Potential of Tenebrio molitor (Coleoptera: Tenebrionidae) as a bioassay probe for Metarhizium brunneum (Hypocreales: Clavicipitaceae) activity against Ixodes scapularis (Acari: Ixodidae).

    Science.gov (United States)

    Bharadwaj, Anuja; Stafford, Kirby C

    2011-12-01

    The yellow mealworm, Tenebrio molitor L., has been used to indicate qualitatively the presence of entomopathogenic fungi in the soil or as a model for evaluating stress and other factors on fungal activity. Although this beetle appears highly susceptible to many of these fungi, little quantitative information is available on the sensitivity of T. molitor to a specific fungus and, therefore, fungal presence or as an indicator for pathogenicity to other species. The purpose of this study was to establish the suitability of T. molitor larvae as a bioassay probe for Metarhizium brunneum for comparison against the blacklegged tick, Ixodes scapularis. Nine concentrations of M. brunneum strain F52 ranging from 1.0 x 10(1) to 8.4 x 10(8) conidial/ml were simultaneously tested against T. molitor larvae and I. scapularis adults. Larvae of yellow mealworm were less sensitive to M. brunneum than I. scapularis adults (LC50's 4.4 x 10(7) and 1.7 x 10(5) conidia/ml, respectively, 4-wk post-treatment). The greater sensitivity of I. scapularis to the fungus suggests that the detection of fungal mycosis in mealworms would indicate sufficient inoculum to be pathogenic to I. scapularis and make this insect a suitable probe for evaluation of the presence and activity of M. brunneum against the blacklegged tick in field applications.

  17. A Simple Method for Decreasing the Liquid Junction Potential in a Flow-through-Type Differential pH Sensor Probe Consisting of pH-FETs by Exerting Spatiotemporal Control of the Liquid Junction

    Directory of Open Access Journals (Sweden)

    Akira Yamada

    2015-04-01

    Full Text Available The liquid junction potential (LJP, the phenomenon that occurs when two electrolyte solutions of different composition come into contact, prevents accurate measurements in potentiometry. The effect of the LJP is usually remarkable in measurements of diluted solutions with low buffering capacities or low ion concentrations. Our group has constructed a simple method to eliminate the LJP by exerting spatiotemporal control of a liquid junction (LJ formed between two solutions, a sample solution and a baseline solution (BLS, in a flow-through-type differential pH sensor probe. The method was contrived based on microfluidics. The sensor probe is a differential measurement system composed of two ion-sensitive field-effect transistors (ISFETs and one Ag/AgCl electrode. With our new method, the border region of the sample solution and BLS is vibrated in order to mix solutions and suppress the overshoot after the sample solution is suctioned into the sensor probe. Compared to the conventional method without vibration, our method shortened the settling time from over two min to 15 s and reduced the measurement error by 86% to within 0.060 pH. This new method will be useful for improving the response characteristics and decreasing the measurement error of many apparatuses that use LJs.

  18. A two-step stimulus-response cell-SELEX method to generate a DNA aptamer to recognize inflamed human aortic endothelial cells as a potential in vivo molecular probe for atherosclerosis plaque detection.

    Science.gov (United States)

    Ji, Kaili; Lim, Wee Siang; Li, Sam Fong Yau; Bhakoo, Kishore

    2013-08-01

    Aptamers are single-stranded oligonucleotides that are capable of binding wide classes of targets with high affinity and specificity. Their unique three-dimensional structures present numerous possibilities for recognizing virtually any class of target molecules, making them a promising alternative to antibodies used as molecular probes in biomedical analysis and clinical diagnosis. In recent years, cell-systematic evolution of ligands by exponential enrichment (SELEX) has been used extensively to select aptamers for various cell targets. However, aptamers that have evolved from cell-SELEX to distinguish the "stimulus-response cell" have not previously been reported. Moreover, a number of cumbersome and time-consuming steps involved in conventional cell-SELEX reduce the efficiency and efficacy of the aptamer selection. Here, we report a "two-step" methodology of cell-SELEX that successfully selected DNA aptamers specifically against "inflamed" endothelial cells. This has been termed as stimulus-response cell-SELEX (SRC-SELEX). The SRC-SELEX enables the selection of aptamers to distinguish the cells activated by stimulus of healthy cells or cells isolated from diseased tissue. We report a promising aptamer, N55, selected by SRC-SELEX, which can bind specifically to inflamed endothelial cells both in cell culture and atherosclerotic plaque tissue. This aptamer probe was demonstrated as a potential molecular probe for magnetic resonance imaging to target inflamed endothelial cells and atherosclerotic plaque detection.

  19. Plasma monitoring of the RLVIP-process with a Langmuir probe

    Science.gov (United States)

    Huber, D.; Hallbauer, A.; Pulker, H. K.

    2005-09-01

    The aim of this investigation was to study the characteristics of a reactive-low-voltage-high-current-ion-plating plasma and to correlate the observed plasma data with the properties of films deposited under such conditions. A Langmuir probe system (Smart Probe - Scientific Systems) was inserted into a Balzers BAP 800 ion plating plant above the e-gun evaporation source close to the insulated substrate holder. In this position during RLVIP deposition, plasma potential, floating potential, self-bias voltage, electron temperature, ion current density, and particle number density were measured and calculated, respectively. All measurements were performed in dependence of arc current (20-80A) and oxygen partial pressure (1 - 36 x 10-4mbar). With rising arc current the number of charged particles, the self-bias voltage between plasma and substrates as well as the energy of the condensing and bombarding species were increased. These data explain the increase of density, refractive index and mechanical stress of RLVIP-metal-oxide-layers, like Ta2O5 and Nb2O5, deposited with higher arc currents. An increase of gas pressure decreased the energy of the particles and therefore reduced slightly film density and refractive index. However, it improved chemistry and eliminated unwanted residual optical absorption and also decreased compressive mechanical film stress.

  20. PERANCANGAN FLOATING DOCK UNTUK DAERAH PERAIRAN PELABUHAN KOTA TEGAL

    Directory of Open Access Journals (Sweden)

    Kiryanto Kiryanto

    2013-06-01

    Full Text Available Floating dock merupakan bangunan air sebagai tempat reparasi kapal yang dinilai cukup efisien dalam pembangunannya karena tidak membutuhkan dana yang terlalu mahal. Di sektor indusrti perkapalan kota tegal sudah memiliki galangan dan dock reparasi kapal yang cukup berkembang.  Ide perancangan floating dock ini dirancang sebagai alternatif baru pelayanan reparasi kapal. Perancangan floating dock ini juga memperhatikan dengan detail kapasitas kapal – kapal yang pernah melakukan repararasi di sekitar galangan di Kota Tegal agar ditemukan ukuran utama floating dock yang tepat. Dari Kapasitas kapal yang ada dan berdasarkan metode perbandingan ukuran beberapa floating dock, maka ditemukan ukuran utama yang tepat untuk menampung kebutuhan pelayanan reparasi kapal yaitu LOA = 136,37 m, Lpt = 114.80 m, Bmax = 36,40 m, Bmd: 30,80 m, Tmin = 0,86 m, Tmax = 1,58 m, Hpt = 2,10 m, HOA = 9,60 m. Berdasarkan perhitungan ditemukan juga Ton Lifting Capacity (TLC sebesar 3000 ton. Perancangan menggunakan software perkapalan yaitu dengan menggunakan AutoCad, Delftship, Maxsurf dan Hidromax. Dengan analisa stabilitas menggunakan software Hidromax diketahui bahwa floating dock ini mampu memiliki stabilitas yang baik dengan 4 kondisi yang semua memenuhi criteria  International Maritime Organisation (IMO. Perancangan floating dock ini juga menghitung analisa ekonomis dan investasi. Dari rekapitulasi dana investasi pembangunan floating dock yaitu sebesar Rp.136.622.888.000,00 dengan nilai kembali atau break even point selama 10 tahun dengan modal sendiri, 14 tahun dengan 50% modal sendiri dan 50 % pinjaman bank, dan break event point 18 tahun untuk dana pembangunan floating dock yang berasal dari 100 % pinjaman bank

  1. Removal of nutrients and veterinary antibiotics from swine wastewater by a constructed macrophyte floating bed system.

    Science.gov (United States)

    Xian, Qiming; Hu, Lixia; Chen, Hancheng; Chang, Zhizhou; Zou, Huixian

    2010-12-01

    The potential of three varieties of Italian ryegrass (Lolium multiflorum Lam.), Dryan, Tachimasari and Waseyutaka, to improve the water quality of swine wastewater was evaluated using a constructed macrophyte floating bed system. With respect to reductions in levels of nutrients, chemical oxygen demand (COD), and sulfonamide antimicrobials (SAs, including sulfadiazine, sulfamethazine, and sulfamethoxazole), Dryan performed better than Tachimasari and Waseyutaka. For Dryan, total N was reduced by 84.0%, total P by 90.4%, COD by 83.4% and sulfonamide antimicrobials by 91.8-99.5%. Similar results were observed for Tachimasari and Waseyutaka. The results indicated that the treatment of swine wastewater using the constructed macrophyte floating bed system was effective in the removal of nutrients and veterinary antibiotics.

  2. A numerical modeling for the wave forcing of floating thin plate

    Energy Technology Data Exchange (ETDEWEB)

    Basirat Tabrizi, H. [Amirkabir Univ. of Technology, Mechanical Engineering Dept., Tehran (Iran, Islamic Republic of)]. E-mail: hbasirat@aut.ac.ir, H.Basirat@dal.ca; Kouchaki Motlaq, M. [Islamic Azad Univ., Dept. of Graduate Studies, Arak (Iran, Islamic Republic of)

    2004-07-01

    A finite difference scheme based on central difference, which is applicable to the thin plate floating on intermediate depth water subjected to wave force, is developed. The floating structure analyzed as a plate with unit width and expressed by an elastic bending theory. The fluid flow expressed as an incompressible, inviscid and steady that the potential theory can apply. Here, the water wave elevation assumed the same as the bending displacement structure at the interface. The distribution of the displacement amplitude of structure and the wave amplitude varies in a wavy pattern in the middle part and increases greatly near the edge of plate. The present method verified by comparing quantitatively with the reported experimental and theoretical results of others. (author)

  3. Open source high performance floating-point modules.

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, Keith Douglas

    2006-02-01

    Given the logic density of modern FPGAs, it is feasible to use FPGAs for floating-point applications. However, it is important that any floating-point units that are used be highly optimized. This paper introduces an open source library of highly optimized floating-point units for Xilinx FPGAs. The units are fully IEEE compliant and achieve approximately 230 MHz operation frequency for double-precision add and multiply in a Xilinx Virtex-2-Pro FPGA (-7 speed grade). This speed is achieved with a 10 stage adder pipeline and a 12 stage multiplier pipeline. The area requirement is 571 slices for the adder and 905 slices for the multiplier.

  4. Optimal Control of a Ballast-Stabilized Floating Wind Turbine

    DEFF Research Database (Denmark)

    Christiansen, Søren; Knudsen, Torben; Bak, Thomas

    2011-01-01

    Offshore wind energy capitalizes on the higher and less turbulent wind speeds at sea. The use of floating structures for deeper waters is being explored. The control objective is a tradeoff between power capture and fatigue, especially that produced by the oscillations caused by the reduced...... structural stiffness of a floating installation in combination with a coupling between the fore–aft motion of the tower and the blade pitch. To address this problem, the present paper models a ballast-stabilized floating wind turbine, and suggests a linear quadratic regulator (LQR) in combination with a wind...

  5. Development of a touch trigger probe for micro/nano CMM

    Science.gov (United States)

    Wang, Wei-Li; Fan, Kuang-Chao; Chen, Ye-Jin; Fei, Ye-Tai

    2008-12-01

    Conventional Coordinate Measuring Machines (CMMs) restrict the possibilities for measuring micro mechanical products and noncontact optical measuring methods are not suitable for true three-dimensional measurements. The integrated combination of optical sensors and mechanical transducers employed in this research makes an ideal low cost and high precision touch trigger probe possible to measure miniature components. This touch probe is composed of a stylus with a fiber sphere (310μm in diameter) and a sensor integrated floating plate. The ball tip is fabricated using optical fiber with melting and solidification processes. The stylus is attached to a floating plate, which is connected to the probe housing via four micro wires. The shape and dimension of the floating plate, as well as the length and diameter of the micro wire, are determined according to the selected contact forces. When the probe tip is displaced the wires will perform elastic deformation and four mirrors mounted onto the four-legged plate will amplify the up/down displacement at each mirror position. These displacements can be detected by four corresponding laser focus probes. Experiments were carried out to test the unidirectional touch trigger repeatability. The standard deviation is less than 10nm. The probe structure and the experimental results were also analyzed and validated with finite element AnSYS software.

  6. Overview of Probe-based Storage Technologies

    Science.gov (United States)

    Wang, Lei; Yang, Ci Hui; Wen, Jing; Gong, Si Di; Peng, Yuan Xiu

    2016-07-01

    The current world is in the age of big data where the total amount of global digital data is growing up at an incredible rate. This indeed necessitates a drastic enhancement on the capacity of conventional data storage devices that are, however, suffering from their respective physical drawbacks. Under this circumstance, it is essential to aggressively explore and develop alternative promising mass storage devices, leading to the presence of probe-based storage devices. In this paper, the physical principles and the current status of several different probe storage devices, including thermo-mechanical probe memory, magnetic probe memory, ferroelectric probe memory, and phase-change probe memory, are reviewed in details, as well as their respective merits and weakness. This paper provides an overview of the emerging probe memories potentially for next generation storage device so as to motivate the exploration of more innovative technologies to push forward the development of the probe storage devices.

  7. Multi-pin Langmuir probe measurement for identification of blob propagation characteristics in the Large Helical Device

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H., E-mail: tanaka.hirohiko@lhd.nifs.ac.jp [National Institute for Fusion Science, Toki 509-5292 (Japan); Masuzaki, S. [National Institute for Fusion Science, Toki 509-5292 (Japan); Ohno, N. [Graduate School of Engineering, Nagoya University, Nagoya, Aichi 464-8603 (Japan); Morisaki, T. [National Institute for Fusion Science, Toki 509-5292 (Japan); Tsuji, Y. [Graduate School of Engineering, Nagoya University, Nagoya, Aichi 464-8603 (Japan)

    2015-08-15

    In order to investigate the blobby plasma transport in the Large Helical Device, we have measured electrostatic fluctuations around the divertor leg by using a newly-designed multi-pin reciprocating Langmuir probe. Near the low-field side edge of the divertor leg, positive spikes of ion saturation current fluctuation were observed. In addition, the electric field which correlates with the ion saturation current fluctuation was firstly evaluated with the neighboring floating potential measurement. Considering the positional relationship with the magnetic geometry, the identified direction of the electric field inside the blobs is consistent with the theoretically predicted E × B motion. By applying the conditional averaging method, a quantitative speed of the blobs was preliminary estimated.

  8. The Demographics of Rocky Free-floating Planets and their Detectability by WFIRST

    Science.gov (United States)

    Barclay, Thomas; Quintana, Elisa V.; Raymond, Sean N.; Penny, Matthew T.

    2017-06-01

    Planets are thought to form via accretion from a remnant disk of gas and solids around a newly formed star. During this process, material in the disk either remains bound to the star as part of either a planet, a smaller celestial body, or makes up part of the the interplanetary medium; falls into the star; or is ejected from the system. Herein we use dynamical models to probe the abundance and properties of ejected material during late-stage planet formation and estimate their contribution to the free-floating planet population. We present 300 N-body simulations of terrestrial planet formation around a solar-type star, with and without giant planets present, using a model that accounts for collisional fragmentation. In simulations with Jupiter and Saturn analogs, about one-third of the initial (˜5 M ⊕) disk mass is ejected, about half in planets more massive than Mercury but with a mass lower than 0.3 M ⊕, and the remainder in smaller bodies. Most ejections occur within 25 Myr, which is shorter than the timescale typically required for Earth-mass planets to grow (30-100 Myr). When giant planets are omitted from our simulations, almost no material is ejected within 200 Myr and only about 1% of the initial disk is ejected by 2 Gyr. We show that about 2.5 terrestrial-mass planets are ejected per star in the Galaxy. We predict that the space-borne microlensing search for free-floating planets from the Wide-Field Infra-Red Space Telescope will discover up to 15 Mars-mass planets, but few free-floating Earth-mass planets.

  9. Spectroscopic investigation of the binding interactions of a membrane potential molecule in various supramolecular confined environments: contrasting behavior of surfactant molecules in relocation or release of the probe between nanocarriers and DNA surface.

    Science.gov (United States)

    Ghosh, Surajit; Banik, Debasis; Roy, Arpita; Kundu, Niloy; Kuchlyan, Jagannath; Sarkar, Nilmoni

    2014-12-01

    The fluorescence and optical properties of membrane potential probes are widely used to measure cellular transmembrane potentials. Hemicyanine dyes are also able to bind to membranes. The spectral properties of these molecules depend upon the charge shift from the donor moiety to the acceptor moiety. Changes in their spectral properties, i.e. absorption and emission maxima or intensities, are helpful in characterizing model membranes, microheterogeneous media, etc. In this article, we have demonstrated the binding interaction of a membrane potential probe, 1-ethyl-2-(4-(p-dimethylaminophenyl)-1,3-butadienyl)-pyridinium perchlorate (LDS 698), with various supramolecular confined environments. The larger dipole moment in the ground state compared to the excited state is a unique feature of hemicyanine dyes. Due to this unique feature, red shifts in the absorption maxima are observed in hydrophobic environments, compared with bulk solvent. On addition of surfactants and CT DNA to an aqueous solution containing LDS 698, significant increase in the emission intensity along with the quantum yield and lifetime indicate partition of the probe molecules into organized assemblies. In the case of the sodium dodecyl sulfate (SDS)-water system, due to interactions between the cationic LDS 698 and the anionic dodecyl sulfate moiety, the fluorescence intensity at ∼666 nm decreases and an additional peak at ∼590 nm appears at premicellar concentration (∼0.20 mM-4.50 mM). But at ∼5.50 mM SDS concentration, the absorbance in the higher wavelength region increases again, indicating encapsulation of the probe in micellar aggregates. This observation indicates that the premicellar aggregation behavior of SDS can also be judged by observing the changes in the UV-vis and fluorescence spectral patterns. The temperature dependent study also indicates that non-radiative deactivation of the dye molecules is highly restricted in the DNA micro-environment, compared with micelles

  10. Floating Cities: ‘we have a dream to realize’

    OpenAIRE

    Boogaard, Floris; Graaf, R.E. de

    2013-01-01

    A fundamental new approach to urban development is needed for the challenges of the 21st century. Floating houses and cities can accommodate future urbanization without sacrificing land and provide a sustainable living.

  11. Efficient Implementation of Decimal Floating Point Adder in FPGA

    Directory of Open Access Journals (Sweden)

    Yang Huijing

    2013-10-01

    Full Text Available Decimal floating Point adder is one of the most frequent operations used by many financial, business and user-oriented applications but current implementations in FPGAs are very inefficient in terms of both area and latency when compared to binary floating point adder. This paper has shown an efficient implementation of a new parallel decimal floating point module on a reconfigurable platform, which is both area as well as performance optimal. The decimal floating-point Adder was further pipelined into five stages to increase the maximum frequency of operation. The synthesis results for a Stratix IV device indicate that our implementations have 25.1% reduction of the latency and 1.1% reduction of area compared to an existing alter-core adder design, presenting area and delay figures close to those of optimal binary adder trees.  

  12. Can Heavier Liquid Float on Top of a Lighter One?

    Institute of Scientific and Technical Information of China (English)

    A. H. Ayyad; F. Takrori

    2011-01-01

    We report on a first observation of a floating spherical Hg (density 13g/cm3) drop on top of a glycerin (density 1.26g/cm3) drop, the latter is hemispherical and about four times larger in volume. This observation is clearly against nature's gravity law and has never been reported before. Here we present spectacular high resolution photos that clearly demonstrate this remarkable floating phenomenon. Using milli-Q water, the Hg drop would stay down adhered at the triple line. Instead, the coincidental use of tap water displays the same phenomenon. Increasing the volume of the supporting liquid to a certain value causes the Hg drop to sink. A 5-M NaCl aqueous solution is found enough to show the same floating phenomenon. This floating mercury as a phenomenon is puzzling. On this length scale it seems that surface tension and curvature dominate over gravity.

  13. Motion Characteristics of Novel Floating Foundation for Offshore Wind Turbine

    Institute of Scientific and Technical Information of China (English)

    李嘉文; 唐友刚; 王宾

    2016-01-01

    A novel floating foundation to support the NREL offshore 5 MW wind turbine was designed conceptu-ally by combining the characteristics of barge and Spar. The main focus was structural design and hydrodynamic modelling. Based on this novel floating foundation, the hydrodynamic performance was investigated in the fre-quency domain and time domain by using the wave analysis software HydroD and DeepC from Det Norske Veritas. The frequency domain analysis was conducted to investigate the effects of the incident wave angle and water depth. The time-domain analysis was carried out to evaluate the response of the floating foundation under a selected op-erational condition. The hydrodynamic performances of this floating foundation with respect to time series and re-sponse spectra were also investigated in this study.

  14. Backscatter-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer Continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  15. Bathymetry Hillshade-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014. The shaded-relief raster was generated from bathymetry data...

  16. Wave transmission prediction of multilayer floating breakwater using neural network

    Digital Repository Service at National Institute of Oceanography (India)

    Mandal, S.; Patil, S.G.; Hegde, A.V.

    of floating breakwater. Training and testing of the network models are carried out for different hidden nodes and epochs. The results of network models are compared with the measured values. It is observed that the correlation (above 90%) between predicted...

  17. WindFloat Pacific Project, Final Scientific and Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Banister, Kevin [Principle Power, Inc., Emeryville, CA (United States)

    2017-01-17

    PPI’s WindFloat Pacific project (WFP) was an up to 30 MW floating offshore wind demonstration project proposed off the Coast of Oregon. The project was to be sited approximately 18 miles due west of Coos Bay, in over 1000 ft. of water, and is the first floating offshore wind array proposed in the United States, and the first offshore wind project of any kind proposed off the West Coast. PPI’s WindFloat, a semi-submersible foundation designed for high-capacity (6MW+) offshore wind turbines, is at the heart of the proposed project, and enables access to the world class wind resource at the project site and, equally, to other deep water, high wind resource areas around the country.

  18. High voltage switches having one or more floating conductor layers

    Energy Technology Data Exchange (ETDEWEB)

    Werne, Roger W.; Sampayan, Stephen; Harris, John Richardson

    2015-11-24

    This patent document discloses high voltage switches that include one or more electrically floating conductor layers that are isolated from one another in the dielectric medium between the top and bottom switch electrodes. The presence of the one or more electrically floating conductor layers between the top and bottom switch electrodes allow the dielectric medium between the top and bottom switch electrodes to exhibit a higher breakdown voltage than the breakdown voltage when the one or more electrically floating conductor layers are not present between the top and bottom switch electrodes. This increased breakdown voltage in the presence of one or more electrically floating conductor layers in a dielectric medium enables the switch to supply a higher voltage for various high voltage circuits and electric systems.

  19. Page | 155 FLOATING CHARGE: A CHILD OF EQUITABLE ...

    African Journals Online (AJOL)

    Fr. Ikenga

    financial institutions dealing on credit became more conscious in their credit ... to any risk especially as it relates to non-repayment of loans advanced to the ..... significant feature of floating charge is that the company retains management ...

  20. Geologic Observations-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This part of the Oregon Outer Continental Shelf (OCS) Floating Windfarm Suite Data Release presents geological observations from video collected on U.S. Geological...

  1. Geologic Observations-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This part of the Oregon Outer Continental Shelf (OCS) Floating Windfarm Suite Data Release presents geological observations from video collected on U.S. Geological...

  2. Formulation Optimization and In-vitro Evaluation of Oral Floating ...

    African Journals Online (AJOL)

    forming agents for formulating controlled release floating tablets of captopril. FTIR and DSC spectra showed ..... correspond to the stretching vibrations of C–H bond and carboxyl .... barrier which produces upward motion and as a result tablets ...

  3. Bathymetry Hillshade-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014. The shaded-relief raster was generated from bathymetry data...

  4. Multifractal analysis of managed and independent float exchange rates

    Science.gov (United States)

    Stošić, Darko; Stošić, Dusan; Stošić, Tatijana; Stanley, H. Eugene

    2015-06-01

    We investigate multifractal properties of daily price changes in currency rates using the multifractal detrended fluctuation analysis (MF-DFA). We analyze managed and independent floating currency rates in eight countries, and determine the changes in multifractal spectrum when transitioning between the two regimes. We find that after the transition from managed to independent float regime the changes in multifractal spectrum (position of maximum and width) indicate an increase in market efficiency. The observed changes are more pronounced for developed countries that have a well established trading market. After shuffling the series, we find that the multifractality is due to both probability density function and long term correlations for managed float regime, while for independent float regime multifractality is in most cases caused by broad probability density function.

  5. Backscatter-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer Continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  6. Preparation and evaluation of gastroretentive floating tablets of acyclovir.

    Science.gov (United States)

    Garg, Rajeev; Gupta, G D

    2009-10-01

    The present study performed by preparation and evaluation of floating tablets of Acyclovir as model drug for prolongation of gastric residence time. Floating effervescent tablets were formulated by various materials like hydroxypropyl methylcellulose K 4M, K 15M, psyllium husk, swelling agent as crospovidone and microcrystalline cellulose and gas generating agent like sodium bicarbonate and citric acid and evaluated for floating properties, swelling characteristics and in vitro drug release studies. Floating noneffervescent tablets were prepared by polypropylene foam powder and different matrix forming polymers like HPMC K 4M, Carbopol 934P, xanthan gum and sodium alginate. In vitro drug release studies were performed and drug release kinetics evaluated using the linear regression method was found to follow both the Higuchi and the Korsmeyer and Peppas equation. The drug release mechanism was found fickian type in most of the formulations.

  7. Dynamic Response Analysis of a Floating Mooring System

    Institute of Scientific and Technical Information of China (English)

    LE Conghuan; DING Hongyan; ZHANG Puyang

    2014-01-01

    An innovative floating mooring system with two or more independent floating mooring platforms in the middle and one rigid platform on each side is proposed for improving efficiency and safety in shallow water. For this new system, most of collision energy is absorbed through the displacement of floating platforms. In order to illustrate the validity of the system, a series of model tests were conducted at a scale of 1:40. The coupled motion characteristics of the floating mooring platforms were discussed under regular and irregular waves, and the influences of wave direction and other characteristics on dynamic response of the system were analyzed. The results show that the mooring system is safest at 0˚of wave incident angle, whereas the most dangerous mooring state occurs at 90˚ of wave incident angle. Motion responses increase with the increase of wave height, but are not linearly related to changes in wave height.

  8. Floating tidal power station. Schwimmkoerper-Gezeiten-Kraftwerk

    Energy Technology Data Exchange (ETDEWEB)

    Muenzner, H.J.

    1987-03-19

    This is a floating tidal power station, characterized by the fact that water stores are lifted by the tide by float lifts in the form of docks; on the flood tide they are supported mechanically at the height reached by support members or hydraulically, until after several tides a favourable and economically justifiable height for the technical efficiency of water turbines is reached by the first water store. The stored water is then released through water turbines to obtain energy. This emptied water store is then lowered to the initial position with the support members with the aid of emptied float lifts built like ship's lifting equipment (which only require a slight movement of a weight for lifting and lowering). The filling and lifting is then repeated. During this regeneration, the energy is obtained from the next water store. A whole floating tidal power station consists of as many water stores as are required for uninterrupted continuous operation.

  9. Bathymetry-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  10. Contours-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site in 2014. The...

  11. Breakwater Design for protection of floating houses in Haringvliet Region

    OpenAIRE

    Aggarwal, a; Vargas Solis, A.; Pasaoglu, M.; Harihar, S.; Wahida, S.; Wang, Q.

    2014-01-01

    A floating house development project to be constructed in the coast of Hellevoetsluis, in the municipality of Voorne-Putten, is under consideration. Within a project of this nature, several aspects need to be taken into account in order to safeguard the infrastructure against additional loadings to which regular houses are not exposed to. Hydrodynamic forcing could directly or indirectly cause damage and unpleasant displacements on the houses, as they float on the waters of the Harringvliet e...

  12. Study on new float polishing with the MCF

    OpenAIRE

    Shimada, K.; Matsuo, Y.; Yamamoto, K; Zheng, Y.

    2007-01-01

    Purpose: As a continuation of a previous paper [1], the report demonstrates the various possibilities of float polishing utilizing the present improved magnetic compound fluid (MCF). The MCF developed by one of authors, Shimada, in 2001, was improved by the addition of α-cellulose, thereby achieving a clearance as great as 8mm as shown in another paper [1]. The present paper describes the possibility of the application of the MCF float polishing technique with α-cellulose.Design/methodology/a...

  13. Parametric time delay modeling for floating point units

    Science.gov (United States)

    Fahmy, Hossam A. H.; Liddicoat, Albert A.; Flynn, Michael J.

    2002-12-01

    A parametric time delay model to compare floating point unit implementations is proposed. This model is used to compare a previously proposed floating point adder using a redundant number representation with other high-performance implementations. The operand width, the fan-in of the logic gates and the radix of the redundant format are used as parameters to the model. The comparison is done over a range of operand widths, fan-in and radices to show the merits of each implementation.

  14. Floating-point multiple data stream digital signal processor

    Energy Technology Data Exchange (ETDEWEB)

    Fortier, M.; Corinthios, M.J.

    1982-01-01

    A microprogrammed multiple data stream digital signal processor is introduced. This floating-point processor is capable of implementing optimum Wiener filtering of signals, in general, and images in particular. Generalised spectral analysis transforms such as Fourier, Walsh, Hadamard, and generalised Walsh are efficiently implemented in a bit-slice microprocessor-based architecture. In this architecture, a microprogrammed sequencing section directly controls a central floating-point signal processing unit. Throughout, computations are performed on pipelined multiple complex data streams. 12 references.

  15. Storage of hydrogen in floating catalytic carbon nanotubes after graphitizing

    Institute of Scientific and Technical Information of China (English)

    朱宏伟; 李雪松; 慈立杰; 徐才录; 毛宗强; 梁吉; 吴德海

    2002-01-01

    Hydrogen storage under moderate pressure (~10 Mpa) and ambient temperature (~25℃) in multi-walled carbon nanotubes (MWNTs) prepared by the floating catalyst method is investigated. The capacity of hydrogen adsorption is evaluated based on both the nanotubes diameter and morphology. Indirect evidence indicates that hydrogen adsorption not only occurs on tube surface and interiors, but also in tube interlayers. The results show that the floating catalytic carbon nanotubes might be a candidate hydrogen storage material for fuel cell electric vehicles.

  16. Study of a Floated Pendulum Accelerometer with Passive Magnetic Suspension

    OpenAIRE

    TAKIZAWA, Minoru; OOTSUKI, Masao; Suzuki, Takao; 滝沢, 実; 大月, 正男; 鈴木,孝雄

    1980-01-01

    In the last few years, in order to develop more precise inertial sensors, such as floated gyros and floated accelerometers used in the inertial navigation system, a passive magnetic suspension with an eight-pole stator, that can be applied to support the output axes of the sensors, has been theoretically and experimentally studied at NAL (National Aerospace Laboratory). In our previous reports, 7)~10)29) a theoretical analysis and an experimental study of the magnetic suspension were describe...

  17. Design of a reversible single precision floating point subtractor

    OpenAIRE

    Anantha Lakshmi, AV; Sudha, GF

    2014-01-01

    In recent years, Reversible logic has emerged as a major area of research due to its ability to reduce the power dissipation which is the main requirement in the low power digital circuit design. It has wide applications like low power CMOS design, Nano-technology, Digital signal processing, Communication, DNA computing and Optical computing. Floating-point operations are needed very frequently in nearly all computing disciplines, and studies have shown floating-point addition/subtraction to ...

  18. Influence of gravity on the collective molecular dynamics of liquid water: the case of the floating water bridge

    CERN Document Server

    Del Giudice, Emilio

    2010-01-01

    Quantum electrodynamics (QED) produces a picture of liquid water as a mixture of a low density coherent phase and an high density non-coherent phase. Consequently, the Archimedes principle prescribes that, within a gravitational field, liquid water should be made up, at surface, mainly of the coherent fraction, which becomes a cage where the gas-like non-coherent fraction is trapped, acquiring a non-vanishing pressure (vapor tension). Therefore, it is possible to probe the QED picture by observing the behavior of liquid water under reduced gravity conditions. The floating water bridge could be a useful test model.

  19. A comparison between the dynamics of horizontal and vertical axis offshore floating wind turbines.

    Science.gov (United States)

    Borg, M; Collu, M

    2015-02-28

    The need to further exploit offshore wind resources in deeper waters has led to a re-emerging interest in vertical axis wind turbines (VAWTs) for floating foundation applications. However, there has been little effort to systematically compare VAWTs to the more conventional horizontal axis wind turbine (HAWT). This article initiates this comparison based on prime principles, focusing on the turbine aerodynamic forces and their impact on the floating wind turbine static and dynamic responses. VAWTs generate substantially different aerodynamic forces on the support structure, in particular, a potentially lower inclining moment and a substantially higher torque than HAWTs. Considering the static stability requirements, the advantages of a lower inclining moment, a lower wind turbine mass and a lower centre of gravity are illustrated, all of which are exploitable to have a less costly support structure. Floating VAWTs experience increased motion in the frequency range surrounding the turbine [number of blades]×[rotational speed] frequency. For very large VAWTs with slower rotational speeds, this frequency range may significantly overlap with the range of wave excitation forces. Quantitative considerations are undertaken comparing the reference NREL 5 MW HAWT with the NOVA 5 MW VAWT.

  20. Influence of Model Simplifications Excitation Force in Surge for a Floating Foundation for Offshore Wind Turbines

    Directory of Open Access Journals (Sweden)

    Morten Thøtt Andersen

    2015-04-01

    Full Text Available As offshore wind turbines move towards deeper and more distant sites, the concept of floating foundations is a potential technically and economically attractive alternative to the traditional fixed foundations. Unlike the well-studied monopile, the geometry of a floating foundation is complex and, thereby, increases the difficulty in wave force determination due to limitations of the commonly used simplified methods. This paper deals with a physical model test of the hydrodynamic excitation force in surge on a fixed three-columned structure intended as a floating foundation for offshore wind turbines. The experiments were conducted in a wave basin at Aalborg University. The test results are compared with a Boundary Element Method code based on linear diffraction theory for different wave force regimes defined by the column diameter, wave heights and lengths. Furthermore, the study investigates the influence of incident wave direction and stabilizing heave-plates. The structure can be divided into primary, secondary and tertiary parts, defined by the columns, heave-plates and braces to determine the excitation force in surge. The test results are in good agreement with the numerical computation for the primary parts only, which leads to simplified determination of peak frequencies and corresponding dominant force regime.

  1. A free-floating currency regime during economic crisis: advantage or disadvantage?

    Directory of Open Access Journals (Sweden)

    Lubor Lacina

    2011-01-01

    Full Text Available The paper deals with the identification of potential disadvantages associated with the existence of national currencies with the floating exchange rate regime during the current financial and economic crisis in countries postponing their entry into the eurozone. The hypothesis is that the advantages of a floating exchange rate may be outweighed by their disadvantages (high volatility of exchange rates. First part of the paper provides evidence about the development of Czech crown exchange rate since transition from fix to free float regime. Special attention will be given to the period during the recent global economic crisis. For the sake of comparison, evolution of other currencies in the region (zloty, forint and Slovak crown, will be taken to consideration. Second part of the paper form case studies identifying impact due to volatility on national currencies. Case studies were used to identify possible negative impacts from volatility in national currencies on export firms in the Czech Republic and holders of mortgage loans denominated in foreign currencies in Hungary. The last part of the paper will formulate recommendations for businesses entering into foreign trade relationships, as well as for policy makers in countries using national currencies which are preparing for membership in the eurozone.

  2. Interaction of wave with a body floating on a wide polynya

    Science.gov (United States)

    Li, Z. F.; Shi, Y. Y.; Wu, G. X.

    2017-09-01

    A method based on wide spacing approximation is proposed for the interaction of water wave with a body floating on a polynya. The ice sheet is modelled as an elastic plate and fluid flow is described by the velocity potential theory. The solution procedure is constructed based on the assumption that when the distance between two disturbances to the free surface is sufficiently large, the interactions between them involve only the travelling waves caused by the disturbances and the effect of the evanescent waves is ignored. The solution for the problem can then be obtained from those for a floating body without an ice sheet and for an ice sheet/free surface without a floating body. Both latter solutions have already been found previously and therefore there will be no additional effort in solution once the wide spacing approximation formulation is derived. Extensive numerical results are provided to show that the method is very accurate compared with the exact solution. The obtained formulations are then used to provide some insightful explanations for the physics of flow behaviour, as well as the mechanism for the highly oscillatory features of the hydrodynamic force and body motion. Some explicit equations are derived to show zero reflection by the polynya and peaks and troughs of the force and excited body motion. It is revealed that some of the peaks of the body motion are due to resonance while others are due to the wave characters in the polynya.

  3. ANALYTICAL RESEARCH ON THE WAVE DIFFRACTION OF ARC-SHAPED FLOATING BREAKWATERS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    An analytical method was developed to study the wave diffraction on arc-shaped floating breakwaters. The floating breakwater was assumed to be rigid, thin, vertical, immovable and located in water of constant depth. The fluid domain was divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations could be obtained to determine the unknown coefficients for eigenfunctions. The accuracy of present model and the computer program were verified by a comparison with existing results for the case of arc-shaped bottom-mounted breakwaters. Numerical results, in the form of contour maps of the non-dimension wave amplitude around the breakwater, were presented for a range of wave and breakwater parameters. Results show the wave diffraction on the arc-shaped floating breakwater is related to the incident wavelength and the draft of the breakwater.

  4. Floating microbial fuel cells as energy harvesters for signal transmission from natural water bodies

    Science.gov (United States)

    Schievano, Andrea; Colombo, Alessandra; Grattieri, Matteo; Trasatti, Stefano P.; Liberale, Alessandro; Tremolada, Paolo; Pino, Claudio; Cristiani, Pierangela

    2017-02-01

    A new type of floating microbial fuel cell (fMFC) was developed for power supply of remote environmental sensors and data transmission. Ten operating fMFCs generated a cell potential in the range 100-800 mV depending on the external resistance applied. Power production peaked around 3-3.5 mW (power density of 22-28 mW m-2 cathode) after about 20-30 days of start-up period. The average of daily electrical energy harvested ranged between 10 and 35 mWh/d. Long-term performances were ensured in the presence of dense rice plants (Oryza Sativa). A power management system, based on a step-up DC/DC converter and a low-power data transmission system via SIGFOX™ technology, have been set up for the fMFCs. The tested fMFCs systems allowed to: i) harvest produced energy, ii) supply electronic devices (intermittent LED-light and a buzzer); iii) transmit remote data at low speed (three message of 12 bites each, in 6 s). Several 'floating garden' MFCs were set in the context of demonstrative events at EXPO2015 world exposition held in Milan between May-October 2015. Some of the 'floating garden' MFCs were operating for more than one year.

  5. A novel liquid effervescent floating delivery system for sustained drug delivery.

    Science.gov (United States)

    Ibrahim, H K

    2009-08-01

    An effervescent floating liquid formulation with in situ gelling properties has been assessed for its potential for sustaining drug delivery and targeting. The formulation consisted of sodium alginate and glyceryl monooleate (GMO). The developed formulation met all pre-requisites to become an in situ gelling floating system and it gelled and floated instantaneously in the pH conditions of the stomach. Moreover, the gels formed in situ remained intact for more than 48 h to facilitate sustained release of drugs. Increasing the mannuronic acid ratio of sodium alginate and the GMO concentration significantly retarded the release rate and extent. The in vitro release of both hydrophilic and hydrophobic drugs from the prepared formulations followed root-time kinetics during the sustained release period. Replacing the free drug with drug encapsulated microspheres enabled tailoring of the release profile and achieved zero-order release kinetics. The system retained its appearance and rheological properties for 12 months at ambient conditions. The values of the similarity factor Sd proved the absence of any significant difference in the release profile upon storage.

  6. A system architecture for long duration free floating flight for military applications

    Energy Technology Data Exchange (ETDEWEB)

    Epley, L.E. (CIRRUS Aerospace Corp., Burke, VA (USA))

    1990-08-31

    Accessibility is today's space frontier. Our need for wide-band global communications, earth imaging an sensing, atmospheric measurements and military reconnaissance is endless but growing dependence on space-based systems raises concerns about potential vulnerability. Military commanders want space assets more accessible and under direct local control. As a result, a robust and low cost access to space-like capability has become a national priority. Buoyant vehicles, free floating in the middle stratosphere could provide the kind of cost effective access to space-like capability needed for a verity of missions. These vehicles are inexpensive, invisible and easily launched. Developments in payload electronics, atmospheric wind modeling and materials combined with ever-improving communications and navigation infrastructure are making balloon-borne concepts more attractive. The fundamental question is whether a free floating balloon, used in a pseudo-satellite role, has value in a military system. Flight tests are ongoing under NASA sponsorship. Following these tests NASA intends to use the vehicles for research in the Antarctic. The concept is being reviewed by other agencies interested in stratospheric research. We believe that LDFFF systems have applications in areas of communications, surveillance and other traditional satellite missions. Dialogue with the broader community of space users is needed to expand the applications. This report reviews the status of the recent flight tests and presents an overview of the concept of Long Duration Free Floating Flight for military applications. 12 refs., 13 figs.

  7. Passive Vibration Control of a Semi-Submersible Floating Offshore Wind Turbine

    Directory of Open Access Journals (Sweden)

    Chao Li

    2017-05-01

    Full Text Available Floating offshore wind turbines have the potential to commercially convert the vast wind resource in deep-water area. Compared with fixed-bottom wind turbines, motions of the floating foundation complicate vibrations and loads of the wind turbine in offshore environment. To alleviate the responses of the wind turbine, this study investigates the use of fore–aft tuned mass damper (TMD in nacelle/tower for passive control of a semi-submersible offshore wind turbine. A simplified structural model, considering the degree-of-freedom of platform pitch and surge, tower tilt and TMD translation, is proposed in the light of motion features of semi-submersible platform. After identifying ten unknown parameters, the correctness of the deterministic model is validated by pitch free decay responses. The mass, stiffness and damping of TMD are optimized using both method of exhaustion and genetic algorithm to avoid local minimum. Six optimized TMD devices are evaluated under three kinds of realistic environment conditions. The control effectiveness is assessed by the extreme and fatigue response reduction ratios. It is found that the high stiffness TMDs that directly dissipate the energy of tower oscillation exhibit an overall stable performance. Similar to the spar-type foundation, the TMDs in the nacelle/tower are capable of extending the service life of floating wind turbines.

  8. Evaluation of floating impeller phenomena in a Gyro centrifugal pump.

    Science.gov (United States)

    Nishimura, Ikuya; Ichikawa, S; Mikami, M; Ishitoya, H; Motomura, T; Kawamura, M; Linneweber, J; Glueck, J; Shinohara, T; Nosé, Y

    2013-01-01

    The Gyro centrifugal pump developed as a totally implantable artificial heart was designed with a free impeller, in which the rotational shaft (male bearing) of the impeller was completely separated from the female bearing. For this type of pump, it is very important to keep the proper magnet balance (impeller-magnet and actuator-magnet) in order to prevent thrombus formation and/or bearing wear. When the magnet balance is not proper, the impeller is jerked down into the bottom bearing. On the other hand, if magnet balance is proper, the impeller lifted off the bottom of the pump housing within a certain range of pumping conditions. In this study, this floating phenomenon was investigated in detail. The floating phenomenon was proved by observation of the impeller behavior using a transparent acrylic pump. The impeller floating phenomenon was mapped on a pump performance curve. The impeller floating phenomenon is affected by the magnet-magnet coupling distance and rotational speed of the impeller. In order to keep the proper magnet balance and to maintain the impeller floating phenomenon at the driving condition of right and left pump, the magnet-magnet coupling distance was altered by a spacer which was installed between the pump and actuator. It became clear that the same pump could handle different conditions (right and left ventricular assist), by just changing the thickness of the spacer. When magnet balance is proper, the floating impeller phenomenon occurs automatically in response to the impeller rev. It is called "the dynamic RPM suspension".

  9. Novel ¹⁸F-labeled benzoxazole derivatives as potential positron emission tomography probes for imaging of cerebral β-amyloid plaques in Alzheimer's disease.

    Science.gov (United States)

    Cui, Mengchao; Ono, Masahiro; Kimura, Hiroyuki; Ueda, Masashi; Nakamoto, Yuji; Togashi, Kaori; Okamoto, Yoko; Ihara, Masafumi; Takahashi, Ryosuke; Liu, Boli; Saji, Hideo

    2012-11-01

    Two radiofluoro-pegylated phenylbenzoxazole derivatives, 4-(5-(2-(2-(2-[(18)F]fluoroethoxy)ethoxy)ethoxy)benzo[d]oxazol-2-yl)-N-methylaniline ([(18)F]24) and 4-(5-(2-(2-(2-[(18)F]fluoroethoxy)ethoxy)ethoxy)benzo[d]oxazol-2-yl)-N,N-dimethylaniline ([(18)F]32), were synthesized and evaluated as probes for imaging cerebral β-amyloid (Aβ) plaques in living brain tissue by PET. [(18)F]24 and [(18)F]32 displayed high affinity for Aβ(1-42) aggregates (K(i) = 9.3 and 3.9 nM, respectively). In vitro autoradiography with sections of post-mortem AD brain and transgenic mouse brain confirmed the affinity of these tracers. Initial high uptake into and rapid washout from the brain in normal mice were observed. [(18)F]24 also displayed excellent binding to Aβ plaques in ex vivo autoradiographic experiments with Tg2576 mice. Furthermore, small-animal PET studies demonstrated significant differences in the clearance profile after the administration of [(18)F]24 between Tg2576 and wild-type mice. The results suggest [(18)F]24 to be a useful PET agent for detecting Aβ plaques in the living human brain.

  10. Submolecular Structure and Orientation of Oligonucleotide Duplexes Tethered to Gold Electrodes Probed by Infrared Reflection Absorption Spectroscopy: Effect of the Electrode Potentials.

    Science.gov (United States)

    Kékedy-Nagy, László; Ferapontova, Elena E; Brand, Izabella

    2017-02-23

    Unique electronic and ligand recognition properties of the DNA double helix provide basis for DNA applications in biomolecular electronic and biosensor devices. However, the relation between the structure of DNA at electrified interfaces and its electronic properties is still not well understood. Here, potential-driven changes in the submolecular structure of DNA double helices composed of either adenine-thymine (dAdT)25 or cytosine-guanine (dGdC)20 base pairs tethered to the gold electrodes are for the first time analyzed by in situ polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) performed under the electrochemical control. It is shown that the conformation of the DNA duplexes tethered to gold electrodes via the C6 alkanethiol linker strongly depends on the nucleic acid sequence composition. The tilt of purine and pyrimidine rings of the complementary base pairs (dAdT and dGdC) depends on the potential applied to the electrode. By contrast, neither the conformation nor orientation of the ionic in character phosphate-sugar backbone is affected by the electrode potentials. At potentials more positive than the potential of zero charge (pzc), a gradual tilting of the double helix is observed. In this tilted orientation, the planes of the complementary purine and pyrimidine rings lie ideally parallel to each other. These potentials do not affect the integral stability of the DNA double helix at the charged interface. At potentials more negative than the pzc, DNA helices adopt a vertical to the gold surface orientation. Tilt of the purine and pyrimidine rings depends on the composition of the double helix. In monolayers composed of (dAdT)25 molecules the rings of the complementary base pairs lie parallel to each other. By contrast, the tilt of purine and pyrimidine rings in (dGdC)20 helices depends on the potential applied to the electrode. Such potential-induced mobility of the complementary base pairs can destabilize the helix structure

  11. Proximal Probes Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Proximal Probes Facility consists of laboratories for microscopy, spectroscopy, and probing of nanostructured materials and their functional properties. At the...

  12. Floating point representations in quantum circuit synthesis

    Science.gov (United States)

    Wiebe, Nathan; Kliuchnikov, Vadym

    2013-09-01

    We provide a non-deterministic quantum protocol that approximates the single qubit rotations Rx(2ϕ21ϕ22) using Rx(2ϕ1) and Rx(2ϕ2) and a constant number of Clifford and T operations. We then use this method to construct a ‘floating point’ implementation of a small rotation wherein we use the aforementioned method to construct the exponent part of the rotation and also to combine it with a mantissa. This causes the cost of the synthesis to depend more strongly on the relative (rather than absolute) precision required. We analyze the mean and variance of the T-count required to use our techniques and provide new lower bounds for the T-count for ancilla free synthesis of small single-qubit axial rotations. We further show that our techniques can use ancillas to beat these lower bounds with high probability. We also discuss the T-depth of our method and see that the vast majority of the cost of the resultant circuits can be shifted to parallel computation paths.

  13. Certifying floating-point implementations using Gappa

    CERN Document Server

    De Dinechin, Florent; Melquiond, Guillaume

    2008-01-01

    High confidence in floating-point programs requires proving numerical properties of final and intermediate values. One may need to guarantee that a value stays within some range, or that the error relative to some ideal value is well bounded. Such work may require several lines of proof for each line of code, and will usually be broken by the smallest change to the code (e.g. for maintenance or optimization purpose). Certifying these programs by hand is therefore very tedious and error-prone. This article discusses the use of the Gappa proof assistant in this context. Gappa has two main advantages over previous approaches: Its input format is very close to the actual C code to validate, and it automates error evaluation and propagation using interval arithmetic. Besides, it can be used to incrementally prove complex mathematical properties pertaining to the C code. Yet it does not require any specific knowledge about automatic theorem proving, and thus is accessible to a wide community. Moreover, Gappa may ge...

  14. Traumatic Floating Clavicle- A case report

    Science.gov (United States)

    Sopu, Alexandra; Green, Connor; Molony, Diarmuid

    2015-01-01

    Introduction: Shoulder injuries after high velocity trauma are common. Clavicle is affected in almost half of these cases. Even so, bipolar dislocation of the clavicle is an unusual injury and seldom reported in the literature. Conservative management is used for almost all the cases and only selected cases will undergo surgical treatment. Case Report: A 52 year old right electrician presented to the emergency department following a fall from a push bicycle. Plain radiographs identified a left first metacarpal (MC) fracture and a bipolar fracture of his right clavicle. Following Fracture Clinic review, significant deformity of the medial clavicle was noted and a CT scan showed anterior dislocation of the medial fragment. Given the degree of deformity and this functional requirement we felt that operative treatment was most appropriate for his unstable medial clavicle fracture dislocation. Conclusion: Surgical treatment of floating clavicle has an important role in the management of fit and active patients. It is important to identify the mechanism of injury and deforming forces in fractures and only after this to plan to neutralise these where appropriate. PMID:27299032

  15. Residents' perceptions of a night float system

    Directory of Open Access Journals (Sweden)

    Granieri Rosanne

    2009-08-01

    Full Text Available Abstract Background A Night Float (NF system has been implemented by many institutions to address increasing concerns about residents' work hours. The purpose of our study was to examine the perceptions of residents towards a NF system. Methods A 115-item questionnaire was developed to assess residents' perceptions of the NF rotation as compared with a regular call month. The categories included patient care, education, medical errors, and overall satisfaction. Internal Medicine housestaff (post-graduate years 1–3 from three hospital settings at the University of Pittsburgh completed the questionnaire. Results The response rate was 90% (n = 149. Of these, 74 had completed the NF rotation. The housestaff felt that the quality of patient care was improved because of NF (41% agreed and 18% disagreed. A majority also felt that better care was provided by a rested physician in spite of being less familiar with the patient (46% agreed and 21% disagreed. Most felt that there was less emphasis on education (65% and more emphasis on service (52% during NF. Overall, the residents felt more rested during their call months (83% and strongly supported the 80-hour workweek requirement (77%. Conclusion Housestaff felt that the overall quality of patient care was improved by a NF system. The perceived improved quality of care by a rested physician coupled with a perceived decrease in the emphasis on education may have significant implications in housestaff training.

  16. Entropie analysis of floating car data systems

    Directory of Open Access Journals (Sweden)

    F. Gössel

    2004-01-01

    Full Text Available The knowledge of the actual traffic state is a basic prerequisite of modern traffic telematic systems. Floating Car Data (FCD systems are becoming more and more important for the provision of actual and reliable traffic data. In these systems the vehicle velocity is the original variable for the evaluation of the current traffic condition. As real FCDsystems are operating under conditions of limited transmission and processing capacity the analysis of the original variable vehicle speed is of special interest. Entropy considerations are especially useful for the deduction of fundamental restrictions and limitations. The paper analyses velocity-time profiles by means of information entropy. It emphasises in quantification of the information content of velocity-time profiles and the discussion of entropy dynamic in velocity-time profiles. Investigations are based on empirical data derived during field trials. The analysis of entropy dynamic is carried out in two different ways. On one hand velocity differences within a certain interval of time are used, on the other hand the transinformation between velocities in certain time distances was evaluated. One important result is an optimal sample-rate for the detection of velocity data in FCD-systems. The influence of spatial segmentation and of different states of traffic was discussed.

  17. Floating geomembrane cover improves biogas collection

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, J.

    2009-07-15

    Canadian corn products refiner, Casco Inc., recently upgraded a wastewater anaerobic digester at its automated corn wet milling facility on the St. Lawrence River, in Cardinal Ontario. The upgrade includes an improved floating and insulated geomembrane cover, designed and installed by Geomembrane Technologies Inc. The cover effectively streamlines biogas collection, improves biogas odour control and optimizes bioreactor heat retention. Casco's bulk volume fermenter (BVF) was designed and built in 1988 by ADI Systems Inc. It is limited to receiving 641,000 gallons of wastewater per day from several areas of the plant. Wastewater sludge is usually treated by anaerobic digestion. At Casco, raw solids are added directly to the BVF bioreactor, where they are digested, minimizing waste sludge handling. In essence, anaerobic digestion is a renewable energy source which converts wastewater to a methane- and carbon dioxide-rich biogas suitable for energy production, replacing fossil fuels. The insulated geomembrane cover captures and reclaims all the biogas from the treatment process that is going on inside the tank. Without a cover, the biogas would be released to the atmosphere. The new geomembrane cover collects an average of 236,000 cubic feet of biogas per day, at a 65 per cent methane concentration, from the BVF bioreactor. 2 figs.

  18. Nanoscale thermal probing

    Directory of Open Access Journals (Sweden)

    Yanan Yue

    2012-03-01

    Full Text Available Nanoscale novel devices have raised the demand for nanoscale thermal characterization that is critical for evaluating the device performance and durability. Achieving nanoscale spatial resolution and high accuracy in temperature measurement is very challenging due to the limitation of measurement pathways. In this review, we discuss four methodologies currently developed in nanoscale surface imaging and temperature measurement. To overcome the restriction of the conventional methods, the scanning thermal microscopy technique is widely used. From the perspective of measuring target, the optical feature size method can be applied by using either Raman or fluorescence thermometry. The near-field optical method that measures nanoscale temperature by focusing the optical field to a nano-sized region provides a non-contact and non-destructive way for nanoscale thermal probing. Although the resistance thermometry based on nano-sized thermal sensors is possible for nanoscale thermal probing, significant effort is still needed to reduce the size of the current sensors by using advanced fabrication techniques. At the same time, the development of nanoscale imaging techniques, such as fluorescence imaging, provides a great potential solution to resolve the nanoscale thermal probing problem.

  19. Stormwater nitrogen removal performance of a floating treatment wetland.

    Science.gov (United States)

    Borne, Karine E; Tanner, Chris C; Fassman-Beck, Elizabeth A

    2013-01-01

    The nitrogen (N) removal efficiency and effluent quality of two parallel stormwater retention ponds, one retrofitted with a floating treatment wetland (FTW) and one without any vegetation, was compared in a field trial. This study shows that inclusion of FTWs in stormwater retention ponds has potential to moderately improve N removal. Median FTW outlet event mean concentrations (EMCs) were lower than median inlet and control pond outlet EMCs for all species of N, except for NH(4)-N. Performance was statistically better from late spring to end autumn due to higher organic nitrogen (ON) removal and denitrification in presence of the FTW. Low dissolved oxygen (DO), higher temperature and increased organic matter (OM) and microbial activity below the FTW, likely facilitated the higher denitrification rates observed over this period. Greater sediment N accumulation in the FTW pond also contributed to its higher overall N removal. Higher OM availability in the FTW pond due to release of root exudates and supply of detritus from plant die-back may have contributed to floc formation in the water column, increasing particulate ON settlement. Enhanced ON mineralisation may also be responsible but was probably limited in summer due to the low DO induced by the FTW. Direct uptake by the plants appears to be of less importance.

  20. Water wave transmission by an array of floating disks

    CERN Document Server

    Bennetts, Luke

    2014-01-01

    An experimental validation of theoretical models of transmission of regular water waves by large arrays of floating disks is presented. The experiments are conducted in a wave basin. The models are based on combined potential-flow and thin-plate theories, and the assumption of linear motions. A low-concentration array, in which disks are separated by approximately a disk diameter in equilibrium, and a high-concentration array, in which adjacent disks are almost touching in equilibrium, are used for the experiments. The proportion of incident wave energy transmitted by the disks is presented as a function of wave period, and for different wave amplitudes. Results indicate that the models predict wave energy transmission accurately for small-amplitude waves and low-concentration arrays. Discrepancies for large-amplitude waves and high-concentration arrays are attributed to wave overwash of the disks and collisions between disks. Validation of model predictions of rigid-body motions of a solitary disk are also p...

  1. Reliability-Based Optimal Design for Very Large Floating Structure

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shu-hua(张淑华); FUJIKUBO Masahiko

    2003-01-01

    Costs and losses induced by possible future extreme environmental conditions and difficulties in repairing post-yielding damage strongly suggest the need for proper consideration in design rather than just life loss prevention. This can be addressed through the development of design methodology that balances the initial cost of the very large floating structure (VLFS) against the expected potential losses resulting from future extreme wave-induced structural damage. Here, the development of a methodology for determining optimal, cost-effective design will be presented and applied to a VLFS located in the Tokyo bay. Optimal design criteria are determined based on the total expected life-cycle cost and acceptable damage probability and curvature of the structure, and a set of sizes of the structure are obtained. The methodology and applications require expressions of the initial cost and the expected life-cycle damage cost as functions of the optimal design variables. This study includes the methodology, total life-cycle cost function, structural damage modeling, and reliability analysis.

  2. Sphingolipid signalling domains floating on rafts or buried in caves?

    Science.gov (United States)

    Dobrowsky, R T

    2000-02-01

    Ceramide is a novel lipid mediator involved in regulating cell growth, cell differentiation and cell death. Many studies have focused on characterizing the stimulus-induced production of ceramide and identifying putative downstream molecular targets. However, little remains known about the localization of the regulated production of ceramide through sphingomyelin metabolism in the plasma membrane. Additionally, it is unclear whether a localized increase in ceramide concentration is necessary to facilitate downstream signalling events initiated by this lipid. Recent studies have suggested that detergent-insoluble plasma membrane domains may be highly localized sites for initiating signal transduction cascades by both tyrosine kinase and sphingolipid signalling pathways. These domains are typically enriched in both sphingolipids and cholesterol and have been proposed to form highly ordered lipid rafts floating in a sea of glycerophospholipids. Alternatively, upon integration of the cholesterol binding protein caveolin, these domains may also form small cave-like structures called caveolae. Emerging evidence suggests that the enhanced sphingomyelin content of these lipid domains make them potential substrate pools for sphingomyelinases to produce a high local concentration of ceramide. The subsequent formation of ceramide microdomains in the plasma membrane may be a critical factor in regulating downstream signalling through this lipid messenger.

  3. Damping Wind and Wave Loads on a Floating Wind Turbine

    Directory of Open Access Journals (Sweden)

    Torben Knudsen

    2013-08-01

    Full Text Available Offshore wind energy capitalizes on the higher and less turbulent wind speeds at sea. To enable deployment of wind turbines in deep-water locations, structures are being explored, where wind turbines are placed on a floating platform. This combined structure presents a new control problem, due to the partly unconstrained movement of the platform and ocean wave excitation. If this additional complexity is not dealt with properly, this may lead to a significant increase in the structural loads and, potentially, instability of the controlled system. In this paper, the wave excitation is investigated, and we show the influence that both wind speed, wave frequencies and misalignment between wind and waves have on the system dynamics. A new control model is derived that extends standard turbine models to include the hydrodynamics, additional platform degrees of freedom, the platform mooring system and tower side-side motion, including gyroscopic effects. The models support a model-based design that includes estimators for wind speed and wave frequency. The design is applied to a number of examples representing different wind and wave conditions and successfully demonstrates a reduction in the structural oscillations, while improving power performance.

  4. Mobile Probing Kit

    DEFF Research Database (Denmark)

    Larsen, Jakob Eg; Sørensen, Lene Tolstrup; Sørensen, J.K.

    2007-01-01

    characterized as being highly nomadic and thus potential users of mobile and ubiquitous technologies. The methodology has been applied in the 1ST MAGNET Beyond project in order to obtain user needs and requirements in the process of developing pilot services. We report on the initial findings from applying......Mobile Probing Kit is a low tech and low cost methodology for obtaining inspiration and insights into user needs, requirements and ideas in the early phases of a system's development process. The methodology is developed to identify user needs, requirements and ideas among knowledge workers...

  5. Hydrogen atoms in acetylsalicylic acid (Aspirin): the librating methyl group and probing the potential well in the hydrogen-bonded dimer

    Science.gov (United States)

    Wilson, Chick C.

    2001-02-01

    The structure of acetylsalicylic acid (2-(acetoyloxy)benzoic acid; Aspirin) has been studied by variable temperature single crystal neutron diffraction. The usual large torsional librational motion of the terminal methyl group is observed and its temperature dependence analysed using a simple model for the potential, yielding the force constant and barrier height for this motion. In addition, asymmetry of the scattering density of the proton involved in the hydrogen bond forming the carboxylic acid dimer motif is observed at temperatures above 200 K. This asymmetry is discussed in terms of its possible implications for the shape of the hydrogen bonding potential well.

  6. Optical label-free and model-free probe of the surface potential of nanoscale and microscopic objects in aqueous solution

    Science.gov (United States)

    Lütgebaucks, Cornelis; Gonella, Grazia; Roke, Sylvie

    2016-11-01

    The electrostatic environment of aqueous systems is an essential ingredient for the function of any living system. To understand the electrostatic properties and their molecular foundation in soft, living, and three-dimensional systems, we developed a table-top model-free method to determine the surface potential of nano- and microscopic objects in aqueous solutions. Angle-resolved nonresonant second harmonic (SH) scattering measurements contain enough information to determine the surface potential unambiguously, without making assumptions on the structure of the interfacial region. The scattered SH light that is emitted from both the particle interface and the diffuse double layer can be detected in two different polarization states that have independent scattering patterns. The angular shape and intensity are determined by the surface potential and the second-order surface susceptibility. Calibrating the response with the SH intensity of bulk water, a single, unique surface potential value can be extracted. We demonstrate the method with 80 nm bare oil droplets in water and ˜50 nm dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylserine (DOPS) liposomes at various ionic strengths.

  7. Design of a reversible single precision floating point subtractor.

    Science.gov (United States)

    Anantha Lakshmi, Av; Sudha, Gf

    2014-01-04

    In recent years, Reversible logic has emerged as a major area of research due to its ability to reduce the power dissipation which is the main requirement in the low power digital circuit design. It has wide applications like low power CMOS design, Nano-technology, Digital signal processing, Communication, DNA computing and Optical computing. Floating-point operations are needed very frequently in nearly all computing disciplines, and studies have shown floating-point addition/subtraction to be the most used floating-point operation. However, few designs exist on efficient reversible BCD subtractors but no work on reversible floating point subtractor. In this paper, it is proposed to present an efficient reversible single precision floating-point subtractor. The proposed design requires reversible designs of an 8-bit and a 24-bit comparator unit, an 8-bit and a 24-bit subtractor, and a normalization unit. For normalization, a 24-bit Reversible Leading Zero Detector and a 24-bit reversible shift register is implemented to shift the mantissas. To realize a reversible 1-bit comparator, in this paper, two new 3x3 reversible gates are proposed The proposed reversible 1-bit comparator is better and optimized in terms of the number of reversible gates used, the number of transistor count and the number of garbage outputs. The proposed work is analysed in terms of number of reversible gates, garbage outputs, constant inputs and quantum costs. Using these modules, an efficient design of a reversible single precision floating point subtractor is proposed. Proposed circuits have been simulated using Modelsim and synthesized using Xilinx Virtex5vlx30tff665-3. The total on-chip power consumed by the proposed 32-bit reversible floating point subtractor is 0.410 W.

  8. A signal-on electrochemical DNA biosensor based on potential-assisted Cu(I)-catalyzed azide-alkyne cycloaddition mediated labeling of hairpin-like oligonucleotide with electroactive probe.

    Science.gov (United States)

    Hu, Qiong; Kong, Jinming; Li, Yajie; Zhang, Xueji

    2016-01-15

    A novel electrochemical biosensor was developed for the signal-on detection of sequence-specific DNA by exploiting potential-assisted Cu(I)-catalyzed azide-alkyne cycloaddition (φCuAAC) as an efficient approach for the labeling of hairpin-like oligonucleotide (hairpin) with electroactive probe. The hairpins, dually labeled with thiol and azide at either terminal, were firstly self-assembled on gold electrode and served as the capture probes for the specific recognition of target DNA. Upon hybridization with target DNA, the surface-confined hairpins were unfolded, liberating the azide-containing terminals away from electrode surface. Subsequently, the unfolded hairpins were conveniently and efficiently labeled with ethynylferrocene (EFC) via the φCuAAC. The quantitatively labeled EFC was finally measured via differential pulse voltammetry (DPV) for the signal-on electrochemical detection of sequence-specific DNA. The biosensor presented a good linear response over the range from 1pM to 1nM with a detection limit of 0.62pM. Results also revealed that it was highly specific and held a good detection capability in serum samples. Furthermore, the ability to chemoselectively label hairpin-like oligonucleotide with signal reporter by electrical addressing, together with the simplicity and efficiency of the φCuAAC, makes it compatible with microfluidic devices and microelectrode arrays to achieve the miniaturized and multiplexed detections.

  9. Combustion of liquid fuels floating on water

    Directory of Open Access Journals (Sweden)

    Garo Jean-Pierre

    2007-01-01

    Full Text Available The research presented consists of a study of the burning characteristics of a liquid fuel floating on water with emphasis in the phenomena known as boilover. The problem is of technical interest in the petro-chemical industry, particularly from the point of view of pollution and fires resulting from accidental liquid fuel spills in open water. Testing with multicomponent fuels gives information's about events that can occur in a practical situation, while testing with single component fuels permits obtaining fundamental information about the problem. It evidences the major effects caused by the transfer of heat from the fuel to the water underneath. One of these effects is the disruptive burning of the fuel known as boilover, that is caused by the water boiling and splashing, and results in a sharp increase in burning rate and often in the explosive burning of the fuel. It is shown that this event is caused by the onset of water boiling nucleation at the fuel/water interface and that it occurs at an approximate constant temperature that is above the saturation temperature of the water (water is superheated. These measurements conducted in two laboratories, address the major issues of the process by analyzing the effect of the variation of the parameters of the problem (initial fuel-layer thickness, pool diameter, and fuel type, on the burning rate, time to start of boilover, pre-boilover mass ratio, and boilover intensity. Finally, two types of modeling are proposed to describe the heat transfer in fuel and water phases: one simple for practical purposes, the other, more elaborated and transient, taking particularly into consideration the radiation in depth.

  10. Floating Production Platforms and their Applications in the Development of Oil and Gas Fields in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    Dagang Zhang; Yongjun Chen; Tianyu Zhang

    2014-01-01

    This paper studies the current available options for floating production platforms in developing deepwater oil fields and the potential development models of future oil and gas exploration in the South China Sea. A detailed review of current deepwater platforms worldwide was performed through the examples of industry projects, and the pros and cons of each platform are discussed. Four types of platforms are currently used for the deepwater development: tension leg platform, Spar, semi-submersible platform, and the floating production system offloading. Among these, the TLP and Spar can be used for dry tree applications, and have gained popularity in recent years. The dry tree application enables the extension of the drilling application for fixed platforms into floating systems, and greatly reduces the cost and complexity of the subsea operation. Newly built wet tree semi-submersible production platforms for ultra deepwater are also getting their application, mainly due to the much needed payload for deepwater making the conversion of the old drilling semi-submersible platforms impossible. These platforms have been used in different fields around the world for different environments;each has its own advantages and disadvantages. There are many challenges with the successful use of these floating platforms. A lot of lessons have been learned and extensive experience accumulated through the many project applications. Key technologies are being reviewed for the successful use of floating platforms for field development, and potential future development needs are being discussed. Some of the technologies and experience of platform applications can be well used for the development of the South China Sea oil and gas field.

  11. Probe tip heating assembly

    Science.gov (United States)

    Schmitz, Roger William; Oh, Yunje

    2016-10-25

    A heating assembly configured for use in mechanical testing at a scale of microns or less. The heating assembly includes a probe tip assembly configured for coupling with a transducer of the mechanical testing system. The probe tip assembly includes a probe tip heater system having a heating element, a probe tip coupled with the probe tip heater system, and a heater socket assembly. The heater socket assembly, in one example, includes a yoke and a heater interface that form a socket within the heater socket assembly. The probe tip heater system, coupled with the probe tip, is slidably received and clamped within the socket.

  12. METABOLIC STABILITY OF 6,7-DIALKOXY-4-(2-, 3- AND 4-[18F]FLUOROANILINO)QUINAZOLINES, POTENTIAL EGFR IMAGING PROBES

    OpenAIRE

    Vasdev, Neil; Dorff, Peter N.; O’Neil, James P.; Chin, Frederick T.; Hanrahan, Stephen; VanBrocklin, Henry F.

    2011-01-01

    Epidermal growth factor receptors (EGFR), upregulated in many tumor types, have been a target for therapeutic development and molecular imaging. The objective of this study was to evaluate the distribution and metabolic characteristics of fluorine-18 labeled anilinoquinazolines as potential imaging agents for EGFR tyrosine kinase expression. Fluorine-18 labeled fluoronitrobenzenes were prepared by reaction of potassium cryptand [18F]fluoride with 1,2- and 1,4-dinitrobenzenes, and 3-nitro-N,N,...

  13. Nine New Fluorescent Probes

    Science.gov (United States)

    Lin, Tsung-I.; Jovanovic, Misa V.; Dowben, Robert M.

    1989-06-01

    Absorption and fluorescence spectroscopic studies are reported here for nine new fluorescent probes recently synthesized in our laboratories: four pyrene derivatives with substituents of (i) 1,3-diacetoxy-6,8-dichlorosulfonyl, (ii) 1,3-dihydroxy-6,8-disodiumsulfonate, (iii) 1,3-disodiumsulfonate, and (iv) l-ethoxy-3,6,8-trisodiumsulfonate groups, and five [7-julolidino] coumarin derivatives with substituents of (v) 3-carboxylate-4-methyl, (vi) 3- methylcarboxylate, (vii) 3-acetate-4-methyl, (viii) 3-propionate-4-methyl, and (ix) 3-sulfonate-4-methyl groups. Pyrene compounds i and ii and coumarin compounds v and vi exhibit interesting absorbance and fluorescence properties: their absorption maxima are red shifted compared to the parent compound to the blue-green region, and the band width broadens considerably. All four blue-absorbing dyes fluoresce intensely in the green region, and the two pyrene compounds emit at such long wavelengths without formation of excimers. The fluorescence properties of these compounds are quite environment-sensitive: considerable spectral shifts and fluorescence intensity changes have been observed in the pH range from 3 to 10 and in a wide variety of polar and hydrophobic solvents with vastly different dielectric constants. The high extinction and fluorescence quantum yield of these probes make them ideal fluorescent labeling reagents for proteins, antibodies, nucleic acids, and cellular organelles. The pH and hydrophobicity-dependent fluorescence changes can be utilized as optical pH and/or hydrophobicity indicators for mapping environmental difference in various cellular components in a single cell. Since all nine probes absorb in the UV, but emit at different wavelengths in the visible, these two groups of compounds offer an advantage of utilizing a single monochromatic light source (e.g., a nitrogen laser) to achieve multi-wavelength detection for flow cytometry application. As a first step to explore potential application in

  14. Cross-comparison of spacecraft-environment interaction model predictions applied to Solar Probe Plus near perihelion

    Energy Technology Data Exchange (ETDEWEB)

    Marchand, R. [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2E1 (Canada); Miyake, Y.; Usui, H. [Graduate School of System Informatics, Kobe University, Kobe 657-8501 (Japan); Deca, J.; Lapenta, G. [Centre for Mathematical Plasma Astrophysics, Mathematics Department, KU Leuven, Celestijnenlaan 200B bus 2400, 3001 Leuven (Belgium); Matéo-Vélez, J. C. [Department of Space Environment, Onera—The French Aerospace Lab, Toulouse (France); Ergun, R. E.; Sturner, A. [Department of Astrophysical and Planetary Science, University of Colorado, Boulder, Colorado 80309 (United States); Génot, V. [Institut de Recherche en Astrophysique et Planétologie, Université de Toulouse, France and CNRS, IRAP, 9 Av. colonel Roche, BP 44346, 31028 Toulouse cedex 4 (France); Hilgers, A. [ESA, ESTEC, Keplerlaan 1, PO Box 299, 2200 AG Noordwijk (Netherlands); Markidis, S. [High Performance Computing and Visualization Department, KTH Royal Institute of Technology, Stockholm (Sweden)

    2014-06-15

    Five spacecraft-plasma models are used to simulate the interaction of a simplified geometry Solar Probe Plus (SPP) satellite with the space environment under representative solar wind conditions near perihelion. By considering similarities and differences between results obtained with different numerical approaches under well defined conditions, the consistency and validity of our models can be assessed. The impact on model predictions of physical effects of importance in the SPP mission is also considered by comparing results obtained with and without these effects. Simulation results are presented and compared with increasing levels of complexity in the physics of interaction between solar environment and the SPP spacecraft. The comparisons focus particularly on spacecraft floating potentials, contributions to the currents collected and emitted by the spacecraft, and on the potential and density spatial profiles near the satellite. The physical effects considered include spacecraft charging, photoelectron and secondary electron emission, and the presence of a background magnetic field. Model predictions obtained with our different computational approaches are found to be in agreement within 2% when the same physical processes are taken into account and treated similarly. The comparisons thus indicate that, with the correct description of important physical effects, our simulation models should have the required skill to predict details of satellite-plasma interaction physics under relevant conditions, with a good level of confidence. Our models concur in predicting a negative floating potential V{sub fl}∼−10V for SPP at perihelion. They also predict a “saturated emission regime” whereby most emitted photo- and secondary electron will be reflected by a potential barrier near the surface, back to the spacecraft where they will be recollected.

  15. An organic dye with very large Stokes-shift and broad tunability of fluorescence: Potential two-photon probe for bioimaging and ultra-sensitive solid-state gas sensor

    Energy Technology Data Exchange (ETDEWEB)

    He, Tingchao; Tian, Xiaoqing; Lin, Xiaodong, E-mail: linxd@szu.edu.cn, E-mail: hdsun@ntu.edu.sg [College of Physics Science and Technology, Shenzhen University, Shenzhen 518060 (China); Wang, Yue; Zhao, Xin; Sun, Handong, E-mail: linxd@szu.edu.cn, E-mail: hdsun@ntu.edu.sg [Division of Physics and Applied Physics, and Centre for Disruptive Photonic Technologies (CDPT), School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371 (Singapore); Gao, Yang; Grimsdale, Andrew C. [School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798 (Singapore)

    2016-01-04

    Light-emitting nonlinear optical molecules, especially those with large Stokes shifts and broad tunability of their emission wavelength, have attracted considerable attention for various applications including biomedical imaging and fluorescent sensors. However, most fluorescent chromophores have only limited potential for such applications due to small Stokes shifts, narrow tunability of fluorescence emissions, and small optical nonlinearity in highly polar solvents. In this work, we demonstrate that a two-photon absorbing stilbene chromophore exhibits a large two-photon absorption action cross-section (ηδ = 320 GM) in dimethylsulfoxide (DMSO) and shows broad fluorescence tunability (125 nm) by manipulating the polarity of the surrounding medium. Importantly, a very large Stokes shift of up to 227 nm is achieved in DMSO. Thanks to these features, this chromophore can be utilized as a two-photon probe for bioimaging applications and in an ultrasensitive solid-state gas detector.

  16. Control implementation for the SPUR floating point coprocessor

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, D.

    1987-01-01

    SPUR is a RISC-based multiprocessor workstation being designed to facilitate parallel-processing research. Typically, RISC architectures achieve low performance levels for floating-point intensive applications, as the multiple-cycle floating-point instructions are not implemented in the hardware. In an attempt to raise these performance levels, the SPUR system provides floating-point support through an extended instruction set and tightly-coupled floating-point coprocessor. This report documents the implementation of the control unit for this floating-point coprocessor; describing the coprocessor interface, control PLA definitions, the finite state machine, the dynamic cycle counter, the 4-stage load-store pipeline, and the random logic generated to drive the datapath modules. Implementation techniques and trade-offs are discussed; including design strategy, area and speed optimization, noise margin considerations, and delay balancing rf the datapath control signals for clock skew minimization. Finally, in an attempt to raise these performance levels, the SPUR system The chip is implemented in 2-layer-metal 2..mu..m CMOS technology, and uses a four-phase non-overlapping clock with a target cycle time of approximately 100ns - 140 ns.

  17. The Unified Floating Point Vector Coprocessor for Reconfigurable Hardware

    Science.gov (United States)

    Kathiara, Jainik

    There has been an increased interest recently in using embedded cores on FPGAs. Many of the applications that make use of these cores have floating point operations. Due to the complexity and expense of floating point hardware, these algorithms are usually converted to fixed point operations or implemented using floating-point emulation in software. As the technology advances, more and more homogeneous computational resources and fixed function embedded blocks are added to FPGAs and hence implementation of floating point hardware becomes a feasible option. In this research we have implemented a high performance, autonomous floating point vector Coprocessor (FPVC) that works independently within an embedded processor system. We have presented a unified approach to vector and scalar computation, using a single register file for both scalar operands and vector elements. The Hybrid vector/SIMD computational model of FPVC results in greater overall performance for most applications along with improved peak performance compared to other approaches. By parameterizing vector length and the number of vector lanes, we can design an application specific FPVC and take optimal advantage of the FPGA fabric. For this research we have also initiated designing a software library for various computational kernels, each of which adapts FPVC's configuration and provide maximal performance. The kernels implemented are from the area of linear algebra and include matrix multiplication and QR and Cholesky decomposition. We have demonstrated the operation of FPVC on a Xilinx Virtex 5 using the embedded PowerPC.

  18. A Fast Floating Point Double Precision Implementation on Fpga

    Directory of Open Access Journals (Sweden)

    Monika Maan

    2016-06-01

    Full Text Available In the modern day digital systems, floating point units are an important component in many signal and image processing applications. Many approaches of the floating point units have been proposed and compared with their counterparts in recent years. IEEE 754 floating point standard allows two types of precision units for floating point operations, single and double. In the proposed architecture double precision floating point unit is used and basic arithmetic operations are performed. A parallel architecture is proposed along with the high speed adder, which is shared among other operations and can perform operations independently as a separate unit. To improve the area efficiency of the unit, carry select adder is designed with the novel resource sharing technique which allows performing the operations with the minimum usage of the resources while computing the carry and sum for „0‟ and „1‟. The design is implemented using the Xilinx Spartan 6 FPGA and the results show the 23% improvement in the speed of the designed circuit.

  19. The coolest 'stars' are free-floating planets

    CERN Document Server

    Joergens, V; Liu, Y; Bayo, A; Wolf, S

    2014-01-01

    We show that the coolest known object that is probably formed in a star-like mode is a free-floating planet. We discovered recently that the free-floating planetary mass object OTS,44 (M9.5, ~12 Jupiter masses, age ~2 Myr) has significant accretion and a substantial disk. This demonstrates that the processes that characterize the canonical star-like mode of formation apply to isolated objects down to a few Jupiter masses. We detected in VLT/SINFONI spectra that OTS44 has strong, broad, and variable Paschen beta emission. This is the first evidence for active accretion of a free-floating planet. The object allows us to study accretion and disk physics at the extreme and can be seen as free-floating analog of accreting planets that orbit stars. Our analysis of OTS44 shows that the mass-accretion rate decreases continuously from stars of several solar masses down to free-floating planets. We determined, furthermore, the disk mass (10 Earth masses) and further disk properties of OTS44 through modeling its SED inc...

  20. Preparation and evaluation of gastroretentive floating tablets of Silymarin.

    Science.gov (United States)

    Garg, Rajeev; Gupta, Ghanshyam Das

    2009-06-01

    The present study performed by preparation and evaluation of floating tablets of Silymarin as model drug for prolongation of gastric residence time. Floating effervescent tablets were formulated by various materials like hydroxypropyl methylcellulose (HPMC) K 4M, K 15M, psyllium husk, swelling agent as crospovidone and microcrystalline cellulose and gas generating agent like sodium bicarbonate and citric acid and evaluated for floating properties, swelling characteristics and in vitro drug release studies. Floating noneffervescent tablets were prepared by polypropylene foam powder and different matrix forming polymers like HPMC K 4M, Carbopol 934P, xanthan gum and sodium alginate. In vitro drug release studies were performed and drug release kinetics evaluated using the linear regression method was found to follow both the Higuchi and the Korsemeyer and Peppas equation. The drug release mechanism was found fickian type in most of the formulations. The developed floating tablets of Silymarin may be used in clinic for prolonged drug release for at least 24 h, thereby improving the bioavailability and patient compliance.

  1. Doping as a means to probe the potential dependence of dopamine adsorption on carbon-based surfaces: A first-principles study

    Science.gov (United States)

    Aarva, Anja; Laurila, Tomi; Caro, Miguel A.

    2017-06-01

    In this work, we study the adsorption characteristics of dopamine (DA), ascorbic acid (AA), and dopaminequinone (DAox) on carbonaceous electrodes. Our goal is to obtain a better understanding of the adsorption behavior of these analytes in order to promote the development of new carbon-based electrode materials for sensitive and selective detection of dopamine in vivo. Here we employ density functional theory-based simulations to reach a level of detail that cannot be achieved experimentally. To get a broader understanding of carbonaceous surfaces with different morphological characteristics, we compare three materials: graphene, diamond, and amorphous carbon (a-C). Effects of solvation on adsorption characteristics are taken into account via a continuum solvent model. Potential changes that take place during electrochemical measurements, such as cyclic voltammetry, can also alter the adsorption behavior. In this study, we have utilized doping as an indirect method to simulate these changes by shifting the work function of the electrode material. We demonstrate that sp2- and sp3-rich materials, as well as a-C, respond markedly different to doping. Also the adsorption behavior of the molecules studied here differs depending on the surface material and the change in the surface potential. In all cases, adsorption is spontaneous, but covalent bonding is not detected in vacuum. The aqueous medium has a large effect on the adsorption behavior of DAox, which reaches its highest adsorption energy on diamond when the potential is shifted to more negative values. In all cases, inclusion of the solvent enhances the charge transfer between the slab and DAox. Largest differences in adsorption energy between DA and AA are obtained on graphene. Gaining better understanding of the behavior of the different forms of carbon when used as electrode materials provides a means to rationalize the observed complex phenomena taking place at the electrodes during electrochemical oxidation

  2. Structural studies of transition metal complexes with 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene: probing their potential for the construction of multifunctional molecular assemblies.

    Science.gov (United States)

    Liu, Shi-Xia; Dolder, Stefan; Franz, Patrick; Neels, Antonia; Stoeckli-Evans, Helen; Decurtins, Silvio

    2003-08-11

    Three divalent transition metal complexes of 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene have been prepared and crystallographically characterized. The isostructural Co(II) and the Ni(II) complexes show octahedral geometries around the metal ions with the coordination sites occupied by the pyridyl nitrogen atoms and the thioether sulfur atoms of the ligand and cis coordination of the halide ions. Cyclic voltammetry reveals that the complexation leads to a small anodic shift in the first oxidation potential of the TTF system.

  3. A Method of Hepatocyte Extraction Conjugated with HPLC is Established for Screening Potential Active Components in Chinese Medicines—Probing Herba Artemisiae Scopariae as an Exemplifying Approach

    Directory of Open Access Journals (Sweden)

    Hong-Wei Fan

    2012-02-01

    Full Text Available In order to establish an effective and quick method for screening potential bioactive compounds in Traditional Chinese Medicines (TCMs, hepatocytes were employed for extracting either bifendate, a clinical medicine for liver diseases, or chemicals in Herba Artemisiae Scopariae (A. Scopariae, a commonly used traditional Chinese medicine for remedying liver diseases such as hepatitis induced by viruses, chemicals or alcohol. After hepatocyte extraction the compounds were analyzed by HPLC, therefore this method was referrred to as hepatocyte extraction conjugated with HPLC (HE-HPLC. In the first part of this study, HE-HPLC showed that bifendate was extracted by hepatocytes and detected by HPLC-DAD which indicated the feasibility of this method. Then in the second part of the study, the potential active components in the A. scopariae extract were studied using HE-HPLC. Six chemicals in the A. scopariae extract, which could bind to hepatocytes in vitro, were detected by HPLC-DAD and three were identified as 7-hydroxy-coumarin (7-OH-C, capillartemisin A and 7-methoxy-coumarin, respectively. In vitro assays showed that 7-OH-C protected HL-7702 hepatocytes from H2O2 injury. The results indicated that these compounds could be extracted by hepatocytes, could be detected by HPLC and more importantly were bioactive. It is suggested that HE-HPLC is a useful method for screening potent active components in Chinese medicines used to treat liver diseases.

  4. Cycling and floating performance of symmetric supercapacitor derived from coconut shell biomass

    Science.gov (United States)

    Barzegar, Farshad; Khaleed, Abubakar A.; Ugbo, Faith U.; Oyeniran, Kabir O.; Momodu, Damilola Y.; Bello, Abdulhakeem; Dangbegnon, Julien K.; Manyala, Ncholu

    2016-11-01

    This work present two-step synthesizes route to low-cost mesoporous carbon from coconut shell. The electrochemical characterization of the coconut shell based activated carbon (CSAC) material as electrode for supercapacitor showed a specific capacitance of 186 F g-1, energy density of ˜11 Wh kg-1 and power density of 325 W kg-1 at a 0.5 A g-1 with an excellent stability after floating for 100 h and cycling for 10000 cycles in polymer gel electrolyte. The CSAC showed very good potential as a stable material for supercapacitors desirable for high power applications.

  5. Cycling and floating performance of symmetric supercapacitor derived from coconut shell biomass

    Directory of Open Access Journals (Sweden)

    Farshad Barzegar

    2016-11-01

    Full Text Available This work present two-step synthesizes route to low-cost mesoporous carbon from coconut shell. The electrochemical characterization of the coconut shell based activated carbon (CSAC material as electrode for supercapacitor showed a specific capacitance of 186 F g-1, energy density of ∼11 Wh kg-1 and power density of 325 W kg-1 at a 0.5 A g-1 with an excellent stability after floating for 100 h and cycling for 10000 cycles in polymer gel electrolyte. The CSAC showed very good potential as a stable material for supercapacitors desirable for high power applications.

  6. Synthesis and Biological Evaluation of Novel 99mTc(CO3-Labeled Thymidine Analogs as Potential Probes for Tumor Proliferation Imaging

    Directory of Open Access Journals (Sweden)

    Xiaojiang Duan

    2016-04-01

    Full Text Available Achieving a 99mTc labeled thymidine radiotracer for single photon emission tomography (SPECT is considered to be of interest. In this study, four novel thymidine analogs, 6a, 6b, 6c and 6d, were successfully synthesized via “click reaction” route and then radiolabeled using a [99mTc(CO3]+ core to prepare the corresponding 99mTc(CO3 complexes in high yields. These complexes were hydrophilic and had good in vitro stability. Biodistribution of these complexes in mice bearing S180 tumors showed that all of them exhibited accumulation in the tumors, suggesting that they would be potential tumor imaging agents.

  7. A scanning contact probe for a micro-coordinate measuring machine (CMM)

    Science.gov (United States)

    Fan, Kuang-Chao; Cheng, Fang; Wang, Weili; Chen, Yejin; Lin, Jia-You

    2010-05-01

    A new high precision contact scanning probe able to measure miniature components on a micro/nano-coordinate measuring machine (CMM) is proposed. This contact probe is composed of a fiber stylus with a ball tip, a floating plate and focus sensors. The stylus is attached to a floating plate, which is connected to the probe housing via four elastic wires. When the probe tip is touched and then deflected by the workpiece, the wires experience elastic deformations and the four mirrors mounted on the plate will be displaced. These displacements can be detected by four corresponding laser focus probes. To calibrate this touch trigger probe, a double-trigger method is developed for a high-speed approach and a low-speed touch. Experimental results show that the probe has a symmetric contact property in the horizontal XY plane. The contact force is found to be about 109 µN. The standard deviation of the unidirectional touch is less than 10 nm and the pre-travel distance is around 10 nm with a standard deviation of less than 3 nm.

  8. Polyester mooring stiffness modeling for deepwater floating system

    Institute of Scientific and Technical Information of China (English)

    Chen Yongjun; Qu Yan; Zhang Tianyu

    2013-01-01

    Polyester mooring has become increasing popular to serve as permanent station-keeping system for deepwater floating system during recent years.Comparing to the traditional steel wire mooring,polyester mooring provides significant benefits in deepwater,such as reduced installed capital expenditure (CAPEX) and smaller vertical loads on host platform.Polyester rope is a visco-elastic material,and its stiffness is nonlinear and affected by mean load,load range,loading period and loading history.There is a perception that the polyester stiffness model has significant impact on the floating system' s performance.This paper presents a detailed description and comparison of two stiffness models and three analytic approaches,and provides a systematic study of the impact of polyester mooring stiffness modeling on the deepwater floating system performance.

  9. Organic nano-floating-gate transistor memory with metal nanoparticles

    Science.gov (United States)

    Van Tho, Luu; Baeg, Kang-Jun; Noh, Yong-Young

    2016-04-01

    Organic non-volatile memory is advanced topics for various soft electronics applications as lightweight, low-cost, flexible, and printable solid-state data storage media. As a key building block, organic field-effect transistors (OFETs) with a nano-floating gate are widely used and promising structures to store digital information stably in a memory cell. Different types of nano-floating-gates and their various synthesis methods have been developed and applied to fabricate nanoparticle-based non-volatile memory devices. In this review, recent advances in the classes of nano-floating-gate OFET memory devices using metal nanoparticles as charge-trapping sites are briefly reviewed. Details of device fabrication, characterization, and operation mechanisms are reported based on recent research activities reported in the literature.

  10. Floating point hardware emulator for RSX-11D

    Energy Technology Data Exchange (ETDEWEB)

    Kellogg, M.; Long, M.

    1977-01-01

    An RSX-11D task was written to simulate the FP-11 floating point hardware on systems that lack this hardware. The simulation is transparent to tasks using floating point instructions. All normal features of the hardware are simulated exactly, including its action on exception conditions. The emulator is a privileged task occupying about 2.7K words of memory. When it is loaded and run, it sets up a linkage to intercept the reserved instruction trap before it reaches the executive, and route it to a service routine that can decode and simulate the floating point instruction set. The results of a benchmark timing test are given, as are notes on converting the emulator to run under RSX-11M. 1 figure, 2 tables.

  11. VLSI design techniques for floating-point computation

    Energy Technology Data Exchange (ETDEWEB)

    Bose, B. K.

    1988-01-01

    The thesis presents design techniques for floating-point computation in VLSI. A basis for area-time design decisions for arithmetic and memory operations is formulated from a study of computationally intensive programs. Tradeoffs in the design and implementation of an efficient coprocessor interface are studied, together with the implications of hardware support for the IEEE Floating-Point Standard. Algorithm area-time tradeoffs for basic arithmetic functions are analyzed in light of changing technology. Details of a single-chip floating-point unit designed in two-micron CMOS for SPUR are described, including special design considerations for very wide data paths. The pervasive effects of scaling technology on different levels of design are explored, from devices and circuits, through logic and micro-architecture, to algorithms and systems.

  12. Research of design challenges and new technologies for floating LNG

    Science.gov (United States)

    Lee, Dong-Hyun; Ha, Mun-Keun; Kim, Soo-Young; Shin, Sung-Chul

    2014-06-01

    With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO). The global Floating LNG (FLNG) market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  13. Numerical investigation of floating breakwater movement using SPH method

    Directory of Open Access Journals (Sweden)

    A. Najafi-Jilani

    2011-06-01

    Full Text Available In this work, the movement pattern of a floating breakwater is numerically analyzed using Smoothed Particle Hydrodynamic (SPH method as a Lagrangian scheme. At the seaside, the regular incident waves with varying height and period were considered as the dynamic free surface boundary conditions. The smooth and impermeable beach slope was defined as the bottom boundary condition. The effects of various boundary conditions such as incident wave characteristics, beach slope, and water depth on the movement of the floating body were studied. The numerical results are in good agreement with the available experimental data in the literature The results of the movement of the floating body were used to determine the transmitted wave height at the corresponding boundary conditions

  14. Study on Wood Drying Properties under Vacuum-floating Pressure

    Institute of Scientific and Technical Information of China (English)

    ZHANGBiguang; YISonghn; CHANGJianmin; LIXianjun

    2004-01-01

    Using Masson pine as specimens, when drying mediums are overheated steam and hot-air respectively, preheating characteristics of wood under vacuum-floating pressure drying are discussed by measurement of internal temperature field and variation of moisture content during period of preheating. The relationship between drying medium conditions and drying rate of wood reveals that, firstly, compared with process of air-drying, time needed to be preheated under vacuum-floating decreased dramatically, meanwhile,the magnitude of condensation on the surface is relatively larger. Secondly, drying rate of wood under vacuum-floating pressure increases coupled with temperature of medium, reduction of absolute pressure,and raise of fluctuation rate of pressure. The sequence of factors contribution to drying rate is listed as following: temperature of medium (t) > fluctuation rate of pressure (f)> absolute pressure (p).

  15. Formulation and evaluation of glipizide floating-bioadhesive tablets

    Directory of Open Access Journals (Sweden)

    Jayvadan K. Patel

    2010-10-01

    Full Text Available The purpose of this study was formulation and in vitro evaluation of floating-bioadhesive tablets to lengthen the stay of glipizide in its absorption area. Effervescent tablets were made using chitosan (CH, hydroxypropyl methylcellulose (HPMC, carbopolP934 (CP, polymethacrylic acid (PMA, citric acid, and sodium bicarbonate. Tablets with 5% effervescent base had longer lag time than 10%. The type of polymer had no significant effect on the floating lag time. All tablets floated atop the medium for 23-24 hr. Increasing carbopolP934 caused higher bioadhesion than chitosan (p < 0.05. All formulations showed a Higuchi, non-Fickian release mechanism. Tablets with 10% effervescent base, 80% CH/20% HPMC, or 80% CP/20% PMA seemed desirable.

  16. Numerical modelling of floating debris in the world's oceans.

    Science.gov (United States)

    Lebreton, L C-M; Greer, S D; Borrero, J C

    2012-03-01

    A global ocean circulation model is coupled to a Lagrangian particle tracking model to simulate 30 years of input, transport and accumulation of floating debris in the world ocean. Using both terrestrial and maritime inputs, the modelling results clearly show the formation of five accumulation zones in the subtropical latitudes of the major ocean basins. The relative size and concentration of each clearly illustrate the dominance of the accumulation zones in the northern hemisphere, while smaller seas surrounded by densely populated areas are also shown to have a high concentration of floating debris. We also determine the relative contribution of different source regions to the total amount of material in a particular accumulation zone. This study provides a framework for describing the transport, distribution and accumulation of floating marine debris and can be continuously updated and adapted to assess scenarios reflecting changes in the production and disposal of plastic worldwide. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Optimal Selection of Floating Platform for Tidal Current Power Station

    Directory of Open Access Journals (Sweden)

    Fengmei Jing

    2013-06-01

    Full Text Available With continuous development of marine engineering, more and more new structures are used in the exploring of tidal current energy. Three are there different kinds of support structures for tidal current power station, which are sea-bed mounted/gravity based system, pile mounted system and floating moored platform. Comparison with them, the floating mooring system is suit for deep water and the application of which will be widely. In this study, catamaran and semi-submersible as floating platform of tidal current power station are studied. And they are compared with its economic, efficiency of turbine and stability of station. It is found that the catamaran is optimal choice. Based on basic ship theory and using software MOSES, the stability of Catamaran tidal current power station is also calculated. The research of this study is significant and it will be as the reference for the future study.

  18. Research of design challenges and new technologies for floating LNG

    Directory of Open Access Journals (Sweden)

    Lee Dong-Hyun

    2014-06-01

    Full Text Available With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO. The global Floating LNG (FLNG market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  19. Organic matter evolution throughout a 100-cm ombrotrophic profile from an Italian floating mire

    Science.gov (United States)

    Zaccone, Claudio; D'Orazio, Valeria; Lobianco, Daniela; Miano, Teodoro M.

    2015-04-01

    .1%). Main atomic ratios seem to confirm what found during the visual inspection of the core, i.e., Sphagnum material so well preserved that it is hard to classify it as 'peat'. In fact, the F14C age dating suggests that the first 95 cm of Sphagnum material accumulate in less than 55 yrs, thus resulting in an average growing rate of ca. 1.7-1.8 cm yr-1. At the same time, C/N, H/C and O/C ratios show their lowest values between 20 and 55 cm of depth, corresponding to the section with highest bulk density (0.025-0.059 g cm-3). This seems to suggest a slightly more decomposed material. Consequently, the depth of 55-60 cm could represent the emerged (i.e., less anaerobic) section of this floating mire. Finally, the first 100 cm of the core show a great potential to be used as archive of environmental changes, especially considering their high resolution (1 cm = 0.5 yr ca.), although the short time-space covered could be a limiting factor. The Authors thank the Municipality of Posta Fibreno (FR), Managing Authority of the Regional Natural Reserve of Lake Posta Fibreno, for allowing peat cores sampling. C.Z. is indebted to the Staff of the Regional Natural Reserve for the help during samplings and for their continuous feedbacks.

  20. Floating knee injuries: Results of treatment and outcomes

    Directory of Open Access Journals (Sweden)

    Mohammad Hadi Nouraei

    2013-01-01

    Full Text Available Background: Floating knee, referred to as ipsilateral fractures of the femur and tibia, is usually associated with several complications and mortality. This study was designed to present our experience with treatment of this injury throughout; age, sex, mechanism of injury, associated injuries, method and results of treatment, and complications of floating knee are discussed. Materials and Methods: This retrospective study was performed between January 2006 and December 2011. All patients with floating knee injuries who were admitted to the referral educational hospitals were included. The information about the 238 cases of floating knee injuries were gathered through the 254,620 trauma files and after excluding 18 patients who died within 6 months, the remaining files were studied and the target information was recorded. Results: The most frequent age group was 20-29 years (44.5%. The floating knee injuries were more common in males (85.5%. Type (D according to "the classification of Letts and Vincent" was observed in 38.9% cases. The most frequent mechanism of injury was car to motorcycles accidents (48.2%. The most common associated injury was pelvic fractures (86.8%. Open reduction and internal fixation was the common type of treatment (70%. The most common early and late complications were knee hemarthrosis in 31 cases (14% and knee osteoarthritis in 30 cases (13.6%, respectively. Death during the 5 years follow up was due to circulatory disruption, followed by deep vein thrombosis (61%. There was a significant relation between the age and outcomes as it worsens with age (P-value < 0.05. Conclusion: This study revealed that the complication rate associated with floating knee injuries remained high, regardless of the used treatment regimen and surgeons should focus on reducing complications while treating it.

  1. A Comparison of Platform Options for Deep-water Floating Offshore Vertical Axis Wind Turbines: An Initial Study.

    Energy Technology Data Exchange (ETDEWEB)

    Bull, Diana L; Fowler, Matthew; Goupee, Andrew

    2014-08-01

    This analysis utilizes a 5 - MW VAWT topside design envelope created by Sandia National Laborator ies to compare floating platform options fo r each turbine in the design space. The platform designs are based on two existing designs, the OC3 Hywind spar - buoy and Principal Power's WindFloat semi - submersible. These designs are scaled using Froude - scaling relationships to determine an appropriately sized spar - buoy and semi - submersible design for each topside. Both the physical size of the required platform as well as mooring configurations are considered. Results are compared with a comparable 5 - MW HAWT in order to identify potential differences in the platform and mooring sizing between the VAWT and HAWT . The study shows that there is potential for cost savings due to reduced platform size requirements for the VAWT.

  2. The concept of floating electrode for contact-less electrochemical measurements: Application to reinforcing steel-bar corrosion in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Keddam, M. [LISE, UPR 15 du CNRS, Universite Pierre et Marie Curie, 4 place Jussieu, 75252 Paris Cedex 05 (France); Novoa, X.R. [E.T.S.E.I, Universidade de Vigo, Campus Universitario, 36310 Vigo (Spain); Vivier, V. [LISE, UPR 15 du CNRS, Universite Pierre et Marie Curie, 4 place Jussieu, 75252 Paris Cedex 05 (France)], E-mail: vincent.vivier@upmc.fr

    2009-08-15

    The concept of floating electrode is introduced for defining the common electrochemical behaviour of any non-connected, electronically conducting, body immersed in an electrolytic medium. The emphasis is put on both its own polarisation features and its influence on the d.c. and a.c. current and potential across the cell, hence the feasibility, among others, of contact-less electrochemical measurements on floating electrodes. Application to reinforcing steel bars in concrete is investigated by numerical computation of the a.c. current and potential fields in a broad range of concrete resistivity, interfacial resistance and capacitance. Impedance defined in a 4-electrode configuration, when rationalised against the concrete resistivity, is shown to provide, within a realistic range of parameters, a practical mean to access the properties of the bar-concrete interface.

  3. Efficient Hybrid Method for Binary Floating Point Multiplication

    Directory of Open Access Journals (Sweden)

    S. Praveenkumar Reddy,

    2014-04-01

    Full Text Available This paper presents a high speed binary floating point multiplier based on Hybrid Method. To improve speed multiplication of mantissa is done using Hybrid method replacing existing multipliers like Carry Save Multiplier, Dadda Multiplier and Modified Booth Multiplier. Hybrid method is a combination of Dadda Multiplier and Modified Radix-8 Booth Multiplier. The design achieves high speed with maximum frequency of 555 MHz compared to existing floating point multipliers. The multiplier implemented in Verilog HDL and analyzed in Quartus II 10.0 version. Hybrid Multiplier is compared with existing multipliers.

  4. Transition to Chaos in the Floating Half Zone Convection

    Institute of Scientific and Technical Information of China (English)

    AA Yan; CAO Zhong-Hua; HU Wen-Rui

    2007-01-01

    The transition process from steady convection to chaos is experimentally studied in thermocapillary convections of floating half zone. The onset of temperature oscillations in the liquid bridge of floating half zone and further transitions of the temporal convective behaviour are detected by measuring the temperature in the liquid bridge.The fast Fourier transform reveals the frequency and amplitude characteristics of the flow transition. The experimental results indicate the existence of a sequence of period-doubling bifurcations that culminate in chaos.The measured Feigenbaum numbers are δ2 = 4.69 and δ4 = 4.6, which are comparable with the theoretical asymptotic value δ = 4.669.

  5. Collective Molecular Dynamics of a Floating Water Bridge

    CERN Document Server

    Del Giudice, Emilio; Vitiello, Giuseppe

    2010-01-01

    When a high voltage is applied to pure water filling two beakers kept close to each other, a connection forms spontaneously, giving the impression of a floating water bridge. This phenomenon is of special interest, since it comprises a number of phenomena currently tackled in modern water science. The formation and the main properties of this floating water bridge are analyzed in the conceptual framework of quantum electrodynamics. The necessary conditions for the formation are investigated as well as the time evolution of the dynamics. The predictions are found in agreement with the observations.

  6. Towards a Completion of Archimedes' Treatise on Floating Bodies

    CERN Document Server

    Girstmair, Kurt

    2007-01-01

    In his treatise on floating bodies Archimedes determines the equilibrium positions of a floating paraboloid segment, but only in the case when the basis of the segment is either completely outside of the fluid or completely submerged. Here we give a mathematical model for the remaining case, i.e., two simple conditions which describe the equilibria in closed form. We provide tools for finding all equilibria in a reliable way and for the classification of these equilibria. This paper can be considered as a continuation of a recent article of Rorres.

  7. Bifurcated method and apparatus for floating point addition with decreased latency time

    Energy Technology Data Exchange (ETDEWEB)

    Farmwald, Paul M. (Livermore, CA)

    1987-01-01

    Apparatus for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  8. Vegetation, substrate and hydrology in floating marshes in the Mississippi river delta plain wetlands, USA

    Science.gov (United States)

    Sasser, C.E.; Gosselink, J.G.; Swenson, E.M.; Swarzenski, C.M.; Leibowitz, N.C.

    1996-01-01

    In the 1940s extensive floating marshes (locally called 'flotant') were reported and mapped in coastal wetlands of the Mississippi River Delta Plain. These floating marshes included large areas of Panicum hemitomon-dominated freshwater marshes, and Spartina patens/Scirpus olneyi brackish marshes. Today these marshes appear to be quite different in extent and type. We describe five floating habitats and one non-floating, quaking habitat based on differences in buoyancy dynamics (timing and degree of floating), substrate characteristics, and dominant vegetation. All floating marshes have low bulk density, organic substrates. Nearly all are fresh marshes. Panicum hemitomon floating marshes presently occur within the general regions that were reported in the 1940's by O'Neil, but are reduced in extent. Some of the former Panicum hemitomon marshes have been replaced by seasonally or variably floating marshes dominated, or co-dominated by Sagittaria lancifolia or Eleocharis baldwinii. ?? 1996 Kluwer Academic Publishers.

  9. 14 CFR 23.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... midway between the keel and chine lines. (c) Unsymmetrical landing; twin float seaplanes. The..., perpendicularly to the plane of symmetry midway between the keel and chine lines of the float, at the...

  10. 14 CFR 25.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... chine lines. (c) Unsymmetrical landing; twin float seaplanes. The unsymmetrical loading consists of an... symmetry midway between the keel and chine lines of the float, at the same longitudinal station as...

  11. Synthesis of substituted [{sup 123}I]imidazo[1,2-a]pyridines as potential probes for the study of the peripheral benzodiazepine receptors using SPECT

    Energy Technology Data Exchange (ETDEWEB)

    Katsifis, A.; Mattner, F.; Dikic, B.; Papazian, V. [Radiopharmaceuticals Div. R and D, ANSTO, Menai, NSW (Australia)

    2000-07-01

    The imidazo[1,2-a]pyridines N,N'-dimethyl-6-chloro-(4'-iodophenyl)imidazo[1,2-a]pyridine-3-acetamide 1. N,N'-diethyl-6-chloro-(4'-iodophenyl)imidazo[1,2-a]pyridine-3-acetamide 2, and N-methyl-6-chloro-(4'-iodophenyl)imidazo[1,2-a]pyridine-3-acetamide 3, are high affinity and selective ligands for the peripheral benzodiazepineodiazepine receptors (PBR). The [{sup 123}I]1-3 labelled analogues of these compounds were subsequently synthesised for the potential study of the PBR in vivo using SPECT. Radioiodination was achieved by iododestannylation reactions of the corresponding tributyl tin precursors with Na[{sup 123}I] in the presence of peracetic acid, chloramine-T or Iodogen. Purification of the crude product was achieved by semipreparative C-18 RP HPLC to give the products in radiochemical yields of 40-85%. The products were obtained in >97% chemical and radiochemical purity and with specific activities >80 GBq/{mu}mol. (orig.)

  12. Synthesis of [{sup 123}I]iodine labelled imidazo[1,2-b] pyridazines as potential probes for the study of peripheral benzodiazepine receptors using SPECT

    Energy Technology Data Exchange (ETDEWEB)

    Katsifis, A.; Mattner, F.; Dikic, B. [Radiopharmaceuticals Div. ANSTO, Menai, NSW (Australia); Barlin, G. [Div. of Neurosciences, John Curtin School of Medical Research, Australian National Univ., Canberra (Australia)

    2004-07-01

    The pyridazines 3-acetamidomethyl-6-chloro-2-(4'-iodophenyl)imidazo[1,2-b]pyridazine 1 (IC{sub 50} = 1.6 nM) and 3-benzamidomethyl-6-iodo-2-(4'-t-butylphenyl)imidazo[1,2-b] pyridazine 2 (IC{sub 50} = 4.2 nM), are high affinity and selective ligands for the peripheral benzodiazepine receptors (PBR) compared to the central benzodiazepine counterparts. The [{sup 123}I]1 and [{sup 123}I]2 labelled analogues of these compounds were subsequently synthesised for the potential study of the PBR in vivo using SPECT. Radioiodination of [{sup 123}I]1 was achieved by iododestannylation of the corresponding tributyl tin precursor with Na[{sup 123}I] in the presence of peracetic acid or chloramine-T and the product isolated by C-18 RP HPLC. Radioiodination of [{sup 123}I]2 was achieved by copper assisted bromine [{sup 123}I]iodine exchange of the corresponding bromo precursor in the presence of acetic acid and sodium bisulfate as reducing agent at 200 C. Purification of the crude products were achieved by semi-preparative C-18 RP HPLC to give the products in radiochemical yields > 90%. The products were obtained in > 97% chemical and radiochemical purity and with specific activities > 180 GBq/{mu}mol. (orig.)

  13. Corrosion, ion release and Mott-Schottky probe of chromium oxide coatings in saline solution with potential for orthopaedic implant applications

    Science.gov (United States)

    Ogwu, A. A.; Oje, A. M.; Kavanagh, J.

    2016-04-01

    We report our investigation on chromium oxide thin film coatings that show a negligible ion release during electrochemical corrosion testing in saline solution. The chemical constituents of the films prepared by reactive magnetron sputtering were identified to be predominantly Cr2O3 based on Raman spectroscopy anti-symmetric stretching vibration modes for CrIII-O and other peaks and an FTIR spectroscopy E u vibrational mode at 409 cm-1. X-ray photoelectron spectroscopy, multiplet fitting for 2P 3/2 and 2P 1/2 states also confirmed the predominantly Cr2O3 stoichiometry in the films. The prepared chromium oxide coatings showed superior pitting corrosion resistance compared to the native chromium oxide films on bare uncoated stainless steel when tested under open circuit potential, potentiodynamic polarisation and cyclic voltammetry in saline solution. The chromium ion released into solution during the corrosion testing of stainless steel substrates coated with chromium oxide coatings was found to be negligibly small based on atomic absorption spectroscopy measurements. Our Mott-Schottky analysis investigation showed that the negligibly small ion release from the chromium oxide coated steel substrates is most likely due to a much lower defect density on the surface of the deposited coatings compared to the native oxide layer on the uncoated steel substrates. This opens up the opportunity for using chromium oxide surface coatings in hip, knee and other orthopaedic implants where possible metal ion release in vivo still poses a great challenge.

  14. Probing mechanistic photochemistry of glyoxal in the gas phase by ab initio calculations of potential-energy surfaces and adiabatic and nonadiabatic rates.

    Science.gov (United States)

    Li, Quan-Song; Zhang, Feng; Fang, Wei-Hai; Yu, Jian-Guo

    2006-02-07

    In the present work, the wavelength-dependent mechanistic photochemistry of glyoxal in the gas phase has been explored by ab initio calculations of potential-energy surfaces, surface crossing points, and adiabatic and nonadiabatic rates. The CHOCHO molecules in S1 by photoexcitation at 393-440 nm mainly decay to the ground state via internal conversion, which is followed by molecular eliminations to form CO, H2CO,H2, and HCOH. Upon photodissociation of CHOCHO at 350-390 nm, intersystem crossing to T1 followed by the C-C bond cleavage is the dominant process in this wavelength range, which is responsible for the formation of the CHO radicals. The C-C and C-H bond cleavages along the S1 pathway are energetically accessible upon photodissociation of CHOCHO at 290-310 nm, which can compete with the S1-->T1 intersystem crossing process. The present study predicts that the C-H bond cleavage on the S1 surface is probably a new photolysis pathway at high excitation energy, which has not been observed experimentally. In addition, the trans-cis isomerization is predicted to occur more easily in the ground state than in the excited states.

  15. Mobile Game Probes

    DEFF Research Database (Denmark)

    Borup Lynggaard, Aviaja

    2006-01-01

    This paper will examine how probes can be useful for game designers in the preliminary phases of a design process. The work is based upon a case study concerning pervasive mobile phone games where Mobile Game Probes have emerged from the project. The new probes are aimed towards a specific target...... group and the goal is to specify the probes so they will cover the most relevant areas for our project. The Mobile Game Probes generated many interesting results and new issues occurred, since the probes came to be dynamic and favorable for the process in new ways....

  16. FPGA Implementation of Double Precision Floating Point Multiplier using Xilinx Coregen Tool

    OpenAIRE

    Sukhvir Kaur; Parminder Singh Jassal

    2013-01-01

    Floating point arithmetic is widely used in many areas, especially scientific computation and signal processing. The main applications of floating points today are in the field of medical imaging, biometrics, motion capture and audio applications. The IEEE floating point standard defines both single precision and double precision formats. Multiplication is a core operation in many signal processing computations, and as such efficient implementation of floating point multipliers is an importan...

  17. Bio-Optical sensors on Argo Floats. Reports of the international ocean-colour coordinating group

    CSIR Research Space (South Africa)

    Bernard, S

    2011-01-01

    Full Text Available . . . . . . . . . . . . . . . . . . . . . 64 7.2.2 Data status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 7.3 Matching Float and OCR Satellite Measurements . . . . . . . . . . . . . . 68 8 Towards the Implementation of Float Arrays 71 8.1 VAL-floats: Preparatory....3 Satellite correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 References 83 iv • Bio-Optical Sensors on Argo Floats Executive Summary In the past two decades, thanks to the advent of satellite ocean-colour radiometry (OCR), biogeochemical...

  18. Effects of vegetation, season and temperature on removal pollutants in experimental floating treatment wetlands

    OpenAIRE

    Van de Moortel, Annelies; Meers, Erik; Niels DE PAUW; Tack, Filip

    2010-01-01

    The research and interest towards the use of constructed floating wetlands for (waste)water treatment is emerging as more treatment opportunities are marked out, and the technique is applied more often. To evaluate the effect of a floating macrophyte mat and the influence of temperature and season on physico-chemical changes and removal, two constructed floating wetlands (CFWs), including a floating macrophyte mat, and a control, without emergent vegetation, were built. Raw domestic wastewate...

  19. Spatial distributions of floating seaweeds in the East China Sea from late winter to early spring

    OpenAIRE

    Mizuno, S.; Ajisaka, T.; Lahbib, S.; Kokubu, Y.; Alabsi, M. N.; Komatsu, T

    2013-01-01

    Floating seaweeds play an important role as a habitat for many animals accompanying or attaching to them in offshore waters. It was in 2000 that the first report described abundant distributions of floating seaweeds in offshore waters in the East China Sea in spring. Young individuals of the yellowtail Seriola quinqueradiata are captured for aquaculture purposes from floating seaweeds in the East China Sea. Therefore, a sound understanding of the distributions of floating seaweeds in the East...

  20. Triple probe interrogation of spokes in a HiPIMS discharge

    Science.gov (United States)

    Lockwood Estrin, F.; Karkari, S. K.; Bradley, J. W.

    2017-07-01

    Using a triple probe situated above the racetrack and inside the magnetic trap of a magnetron, rotating spoke-like structures have been clearly identified in a single HiPIMS pulse as periodic modulations of the electron temperature T e, electron density n e, ion saturation current I isat, floating potential V f and plasma potential V p. The spokes rotate in the E  ×  B direction with a velocity of ~8.8 km s-1. Defining the spoke shape from the footprint of the ion current, they deliver to flush-mounted probes embedded in the target, each spoke can be characterised by a dense but cool leading edge (n e ~ 2.0  ×  1019 m-3, T e ~ 2.1 eV) and a relatively hotter but more rarefied trailing edge (n e ~ 1  ×  1019 m-3, T e ~ 3.9 eV). Measurements of V p show a potential hump towards the rear of the spoke, separated from regions of the highest density, with plasma potentials up to 8 V more positive than the inter-spoke regions. Azimuthal electric fields of ~1 kV m-1 associated with these structures are calculated. Transforming the triple probe time-traces to functions of the azimuthal angle θ and assuming a Gaussian radial profile for the plasma parameters, 2D spatial maps of n e, T e and V p have been constructed as well as the target ion current density J p from the embedded probes. The phase relationship between T e, V p and n e can be clearly seen using this representation with n e leading T e and V p with a phase shift between them of ~50°. Regions of maximum ion current to the target, delivered by individual spokes, coincide with the overlap of regions of high n e and T e measured above the target at a height of 15 mm. Ions created at elevated positions above the target in the observed dense region will take several micro-seconds to reach that surface, so contributing to the target ion current in the following spokes.

  1. Synthesis and evaluation of a {sup 99m}Tc-MAMA-propyl-thymidine complex as a potential probe for in vivo visualization of tumor cell proliferation with SPECT

    Energy Technology Data Exchange (ETDEWEB)

    Celen, Sofie [Laboratory for Radiopharmacy, K.U. Leuven, B-3000 Leuven (Belgium); Groot, Tjibbe de [Radiopharmacy, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Balzarini, Jan [Rega Institute for Medical Research, K.U. Leuven, B-3000 Leuven (Belgium); Vunckx, Kathleen [Nuclear Medicine, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Terwinghe, Christelle [Radiopharmacy, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Vermaelen, Peter [Nuclear Medicine, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Van Berckelaer, Lizette [Rega Institute for Medical Research, K.U. Leuven, B-3000 Leuven (Belgium); Vanbilloen, Hubert [Radiopharmacy, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Nuyts, Johan [Nuclear Medicine, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Mortelmans, Luc [Nuclear Medicine, U.Z. Gasthuisberg K.U. Leuven, B-3000 Leuven (Belgium); Verbruggen, Alfons [Laboratory for Radiopharmacy, K.U. Leuven, B-3000 Leuven (Belgium); Bormans, Guy [Laboratory for Radiopharmacy, K.U. Leuven, B-3000 Leuven (Belgium)]. E-mail: guy.bormans@pharm.kuleuven.be

    2007-04-15

    Introduction: Cytosolic thymidine kinase (TK1) catalyzes phosphorylation of thymidine to its monophosphate. TK1 activity is closely related with DNA synthesis, and thymidine analogs derivatized with bulky carboranylalkyl groups at the N-3 position were reported to be good substrates for TK1. Accordingly, we have synthesized {sup 99m}Tc-MAMA-propyl-thymidine and evaluated it as a potential tumor tracer. Methods: The bis(S-trityl)-protected MAMA-propyl-thymidine precursor (3-N-[S-trityl-2-mercaptoethyl]-N-[N'-(S-trityl-2-mercaptoethyl) amidoacetyl] -aminopropyl-thymidine) was prepared in three steps, and its structure was confirmed with {sup 1}H NMR and mass spectrometry. Deprotection of the thiols and labeling with {sup 99m}Tc were done in a two-step, one-pot procedure, yielding {sup 99m}Tc-MAMA-propyl-thymidine, which was analyzed with high-performance liquid chromatography, radio-LC-MS analysis (ESI+) and electrophoresis, and its log P was determined. The biodistribution in normal mice was evaluated, and its biodistribution in a radiation-induced fibrosarcoma (RIF) tumor mouse was compared with that of 3'-deoxy-3'-[{sup 18}F] fluorothymidine [{sup 18}F]FLT. Results: {sup 99m}Tc-MAMA-propyl-thymidine was obtained with a radiochemical yield of 70%. Electrophoresis indicated that the complex is uncharged, and its log P was 1.0. The molecular ion mass of the Tc complex was 589 Da, which is compatible with the hypothesized N{sub 2}S{sub 2}-oxotechnetium structure. Tissue distribution showed fast clearance from plasma primarily by the hepatobiliary pathway. Whole-body planar imaging after injection of {sup 99m}Tc-MAMA-propyl-thymidine in an RIF tumor-bearing mouse showed high uptake in the liver and the intestines. No uptake was observed in the tumor, in contrast to the clear uptake observed for [{sup 18}F] FLT visualized with {mu}PET. Conclusions: Although it has been reported that TK1 accepts large substituents at the N-3 position of the thymine ring

  2. Floating production and the implications of a new financial environment; Finance FPSO (Floating Production, Storage and Offloading)

    Energy Technology Data Exchange (ETDEWEB)

    Venturas, George; Knight, Roger

    2009-07-01

    There can be no argument that floating production is central to the ongoing growth of deep water oil production. This is especially true in Africa and Latin America, but also in Asia. Although, over the shorter eighteen month period, we expect an increased move to sub sea tiebacks to existing nubs, there are still a number of various sized floating production projects on the horizon. We expect Angola, Nigeria and Brazil to combine for 32% of future installations over the next five years while contributing to over 45% of future capital expenditure. (Author)

  3. Floating Collection in an Academic Library: An Audacious Experiment That Succeeded

    Science.gov (United States)

    Coopey, Barbara; Eshbach, Barbara; Notartomas, Trish

    2016-01-01

    Can a floating collection thrive in a large multicampus academic research library? Floating collections have been successful in public libraries for some time, but it is uncommon for academic libraries and unheard of for a large academic library system. This article will discuss the investigation into the feasibility of a floating collection at…

  4. 76 FR 52638 - Proposed Information Collection; Comment Request; Shipboard Observation Form for Floating Marine...

    Science.gov (United States)

    2011-08-23

    ... organizations (respondents) as well as numerous experts on marine debris observations at sea. The Shipboard Observation Form for Floating Marine Debris was created based on methods used in studies of floating marine... Observation Form for Floating Marine Debris AGENCY: National Oceanic and Atmospheric Administration...

  5. EDITORIAL: Probing the nanoworld Probing the nanoworld

    Science.gov (United States)

    Miles, Mervyn

    2009-10-01

    In nanotechnology, it is the unique properties arising from nanometre-scale structures that lead not only to their technological importance but also to a better understanding of the underlying science. Over the last twenty years, material properties at the nanoscale have been dominated by the properties of carbon in the form of the C60 molecule, single- and multi-wall carbon nanotubes, nanodiamonds, and recently graphene. During this period, research published in the journal Nanotechnology has revealed the amazing mechanical properties of such materials as well as their remarkable electronic properties with the promise of new devices. Furthermore, nanoparticles, nanotubes, nanorods, and nanowires from metals and dielectrics have been characterized for their electronic, mechanical, optical, chemical and catalytic properties. Scanning probe microscopy (SPM) has become the main characterization technique and atomic force microscopy (AFM) the most frequently used SPM. Over the past twenty years, SPM techniques that were previously experimental in nature have become routine. At the same time, investigations using AFM continue to yield impressive results that demonstrate the great potential of this powerful imaging tool, particularly in close to physiological conditions. In this special issue a collaboration of researchers in Europe report the use of AFM to provide high-resolution topographical images of individual carbon nanotubes immobilized on various biological membranes, including a nuclear membrane for the first time (Lamprecht C et al 2009 Nanotechnology 20 434001). Other SPM developments such as high-speed AFM appear to be making a transition from specialist laboratories to the mainstream, and perhaps the same may be said for non-contact AFM. Looking to the future, characterisation techniques involving SPM and spectroscopy, such as tip-enhanced Raman spectroscopy, could emerge as everyday methods. In all these advanced techniques, routinely available probes will

  6. Assessment of the nutrient removal effectiveness of floating treatment wetlands applied to urban retention ponds.

    Science.gov (United States)

    Wang, Chih-Yu; Sample, David J

    2014-05-01

    The application of floating treatment wetlands (FTWs) in point and non-point source pollution control has received much attention recently. Although the potential of this emerging technology is supported by various studies, quantifying FTW performance in urban retention ponds remains elusive due to significant research gaps. Actual urban retention pond water was utilized in this mesocosm study to evaluate phosphorus and nitrogen removal efficiency of FTWs. Multiple treatments were used to investigate the contribution of each component in the FTW system with a seven-day retention time. The four treatments included a control, floating mat, pickerelweed (Pontederia cordata L.), and softstem bulrush (Schoenoplectus tabernaemontani). The water samples collected on Day 0 (initial) and 7 were analyzed for total phosphorus (TP), total particulate phosphorus, orthophosphate, total nitrogen (TN), organic nitrogen, ammonia nitrogen, nitrate-nitrite nitrogen, and chlorophyll-a. Statistical tests were used to evaluate the differences between the four treatments. The effects of temperature on TP and TN removal rates of the FTWs were described by the modified Arrhenius equation. Our results indicated that all three FTW designs, planted and unplanted floating mats, could significantly improve phosphorus and nitrogen removal efficiency (%, E-TP and E-TN) compared to the control treatment during the growing season, i.e., May through August. The E-TP and E-TN was enhanced by 8.2% and 18.2% in the FTW treatments planted with the pickerelweed and softstem bulrush, respectively. Organic matter decomposition was likely to be the primary contributor of nutrient removal by FTWs in urban retention ponds. Such a mechanism is fostered by microbes within the attached biofilms on the floating mats and plant root surfaces. Among the results of the four treatments, the FTWs planted with pickerelweed had the highest E-TP, and behaved similarly with the other two FTW treatments for nitrogen removal

  7. Properties of Ultrasound Probes

    OpenAIRE

    Rusina, M.

    2015-01-01

    This work deals with the measurement properties of ultrasound probes. Ultrasound probes and their parameters significantly affect the quality of the final image. In this work there are described the possibility of measuring the spatial resolution, sensitivity of the probe and measuring the length of the dead zone. Ultrasound phantom ATS Multi Purpose Phantom Type 539 was used for measurements.

  8. Petrological and geochemical Highlights in the floating fragments of the October 2011 submarine eruption offshore El Hierro (Canary Islands): Relevance of submarine hydrothermal processes

    Science.gov (United States)

    Rodriguez-Losada, Jose A.; Eff-Darwich, Antonio; Hernandez, Luis E.; Viñas, Ronaldo; Pérez, Nemesio; Hernandez, Pedro; Melián, Gladys; Martinez-Frías, Jesús; Romero-Ruiz, M. Carmen; Coello-Bravo, Juan Jesús

    2015-02-01

    This paper describes the main physical, petrological and geochemical features of the floating fragments that were emitted in the initial stages of the 2011-2012 submarine eruption off the coast of the Canarian island of El Hierro, located 380 km from the Northwest African Coast. It attempts to assess the potential of radiometric analyses to discern the intriguing origin of the floating fragments and the differences between their constituent parts. In this regard, the material that conforms the core of the fragments contains the largest concentration of uranium (U) ever found in volcanic rocks of the Canary Islands. This enrichment in U is not found in the content of thorium (Th), hence the floating fragments have an unusual U/Th ratio, namely equal to or larger than 3. Although the origin of this material is under discussion, it is proposed that the enrichment in U is the result of hydrothermal processes.

  9. 40 CFR 65.44 - External floating roof (EFR).

    Science.gov (United States)

    2010-07-01

    ... Section 65.44 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Storage Vessels § 65.44 External floating roof (EFR). (a) EFR design requirements. The owner or operator who elects to control storage vessel regulated material...

  10. The effect of floating houses on water quality

    NARCIS (Netherlands)

    Foka, E.; Rutten, M.; Boogaard, F.; Graaf, R. de; Lima, R.; Giesen, N. van de

    2015-01-01

    The need of an adaptive sustainable solution for the increased land scarcity, growing urbanization, climate change and flood risks resulted in the concept of the floating urbanization. In The Netherlands this new type of housing attracted the interest of local authorities, municipalities and water b

  11. Breakwater Design for protection of floating houses in Haringvliet Region

    NARCIS (Netherlands)

    Aggarwal, A.; Vargas Solis, A.; Pasaoglu, M.; Harihar, S.; Wahida, S.; Wang, Q.

    2014-01-01

    A floating house development project to be constructed in the coast of Hellevoetsluis, in the municipality of Voorne-Putten, is under consideration. Within a project of this nature, several aspects need to be taken into account in order to safeguard the infrastructure against additional loadings to

  12. A Floating Offshore Wind Turbine in Extreme Wave Conditions

    DEFF Research Database (Denmark)

    Wehmeyer, Christof

    and peak enhancement factors, based on cyclonic storm conditions (Wehmeyer et al., 2012). 2. Based on Wehmeyer et al. (2012), a physical model test campaign was drafted, where an industry inspired floating offshore wind turbine was tested (Wehmeyer et al., 2013). 3. A comparison of measured pitch responses...

  13. High speed matrix processors using floating point representation

    Energy Technology Data Exchange (ETDEWEB)

    Birkner, D.A.

    1980-01-01

    The author describes the architecture of a high-speed matrix processor which uses a floating-point format for data representation. It is shown how multipliers and other LSI devices are used in the design to obtain the high speed of the processor.

  14. Block floating-point notation for signal processes

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, J.E.

    1981-03-01

    The development and application of a notation for use with block floating-point (BFP) mathematical operations in real-time signal processes is described. The notation has been extensively used in developing perimeter security signal processors such as the Magnetic Intrusion Line Sensor (MILES) Adaptive Digital Processor (MADP) and its forerunner, the Signal Processing Development Unit (SSPDU).

  15. Benchmarks to supplant export FPDR (Floating Point Data Rate) calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, D.; Brooks, E.; Dongarra, J.; Hayes, A.; Lyon, G.

    1988-06-01

    Because modern computer architectures render application of the FPDR (Floating Point Data Processing Rate) increasingly difficult, there has been increased interest in export evaluation via actual system performances. The report discusses benchmarking of uniprocessor (usually vector) machines for scientific computation (SIMD array processors are not included), and parallel processing and its characterization for export control.

  16. Emulation of floating memcapacitors and meminductors using current conveyors

    OpenAIRE

    Pershin, Yuriy V.; Di Ventra, Massimiliano

    2010-01-01

    We suggest circuit realizations of emulators transforming memristive devices into effective floating memcapacitive and meminductive systems. The emulator's circuits are based on second generation current conveyors and involve either four single-output or two dual-output current conveyors. The equations governing the resulting memcapactive and meminductive systems are presented.

  17. Underwater shock response analysis of a floating vessel

    NARCIS (Netherlands)

    Aanhold, J.E. van; Meijer, G.J.; Lemmen, P.P.M.

    1998-01-01

    The response of a surface vessel to underwater shock has been calculated using an explicit finite element analysis. The analysis model is two-dimensional and contains the floating steel structure, a large surrounding water volume and the free surface. The underwater shock is applied in the form ot a

  18. Asymptomatic free-floating vitreous cyst masquerading as cysticercosis.

    Science.gov (United States)

    Ganger, Anita; Agarwal, Rinki; Kumar, Vinod

    2016-11-02

    A male patient aged 37 years, referred with the diagnosis of right eye intravitreal cysticercosis, was diagnosed as asymptomatic free-floating vitreous cyst after thorough evaluation. The patient was kept under observation, since baseline visual acuity was unaffected. No change was noted over the period of 6 months.

  19. Experimental testing of moorings for large floating wave energy converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2016-01-01

    This paper presents the outcome of a test campaign, which investigates the behaviour of a synthetic mooring system applied to the Floating Power Plant wave energy converter. The study investigates the motion and tension response under operational and extreme sea states expected at the deployment...

  20. Vibrations of a floating beam on marine waves

    Energy Technology Data Exchange (ETDEWEB)

    Sabaneev, Valentin S.; Tovstik, Petr E.; Tovstik, Tatiana M. [St.Petersburg University (Russian Federation); Shekhovtsov, Alexei S. [Architecture Institute, St.Petersburg (Russian Federation)

    2015-03-10

    Vertical vibrations of a floating pipe-concrete beam caused by a harmonic waves excitation are studied. The apparent additional mass of water, resisting force and the velocity of towing are considered. The vibration amplitude and the maximum deformations of concrete, caused by these fluctuations, are calculated.