WorldWideScience

Sample records for floated organic drop

  1. Application of dispersive liquid-liquid-solidified floating organic drop microextraction and ETAAS for the preconcentration and determination of indium.

    Science.gov (United States)

    Ashrafzadeh Afshar, Elham; Taher, Mohammad Ali; Fazelirad, Hamid; Naghizadeh, Matin

    2017-03-01

    A new, simple and efficient method, including dispersive liquid-liquid-solidified floating organic drop microextraction and then electrothermal atomic absorption spectrometry, has been developed for the preconcentration and determination of ultratrace amounts of indium. The method was applied to preconcentrate the indium-1-(2-pyridylazo)-2-naphthol complex in 25 μL 1-undecanol. The various factors affecting the extraction efficiency, such as pH, type and volume of extraction solvent, type and volume of disperser solvent, sample volume, ionic strength, and ligand concentration, were investigated and optimized. Under the optimum conditions, an enrichment factor of 62.5, precision of ±4.75%, a detection limit of 55.6 ng L(-1), and for the calibration graph a linear range of 96.0-3360 ng L(-1) were obtained. The method was used for the extraction and determination of indium in water and standard samples with satisfactory results. Graphical Abstract Preconcentration of indium ions via liquid-liquid-solidified floating organic drop microextraction method and determination by ETAAS.

  2. Determination of molybdenum in plants by vortex-assisted emulsification solidified floating organic drop microextraction and flame atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Jenny A.; Fialho, Lucimar L.; Nóbrega, Joaquim A., E-mail: djan@terra.com.br

    2013-08-01

    A fast and sensitive procedure for extraction and preconcentration of molybdenum in plant samples based on solidified floating organic drop microextraction combined with flame atomic absorption spectrometry and discrete nebulization was developed. 8-Hydroxyquinoline (8-HQ) was used as complexing agent. The experimental conditions established were: 0.5% m v{sup −1} of 8-HQ, 60 μL of 1-undecanol as the extractant phase, 2 min vortex extraction time, centrifugation for 2 min at 2000 rpm, 10 min into an ice bath and discrete nebulization by introducing 200 μL of solution. The calibration curve was linear from 0.02 to 4.0 mg L{sup −1} with a limit of detection of 4.9 μg L{sup −1} and an enhancement factor of 67. The relative standard deviations for ten replicate measurements of 0.05 and 1.0 mg L{sup −1} Mo were 6.0 and 14.5%, respectively. The developed procedure was applied for determining molybdenum in corn samples and accuracy was proved using certified reference materials. - Highlights: ► Molybdenum was determined in plants by flame AAS. ► Flame AAS sensitivity was improved using microextraction and discrete nebulization. ► The developed procedure can be easily implemented in routine analysis. ► Green chemistry principles are followed.

  3. Simultaneous determination of cork taint and Brett character responsible compounds in wine using ultrasound-assisted emulsification microextraction with solidification of floating organic drop.

    Science.gov (United States)

    Pizarro, C; Sáenz-González, C; Pérez-del-Notario, N; González-Sáiz, J M

    2012-08-03

    In this study, ultrasound-assisted emulsification microextraction combined with solidification of floating organic drop method (USAEME-SFOD) has been proposed as a novel approach for the sensitive determination of haloanisoles and volatile phenols in wines. For this purpose, the influence of the different parameters affecting the procedure (type and volume of extraction solvent, temperature, time and ionic strength) was evaluated in order to optimise the efficiency of the process. Subsequently, the linearity, detection and quantification limits, precision, recoveries and applicability to real samples were studied, obtaining excellent method performance results. Moreover, USAEME-SFOD was compared with other liquid-liquid microextraction methods such as dispersive liquid-liquid microextraction (DLLME) and ultrasound-assisted emulsification microextraction (USAEME). This comparison study proved the suitability of USAEME-SFOD as an alternative to previously reported methods for the simultaneous determination of cork taint and Brett character responsible compounds in wines.

  4. Dispersive liquid-liquid microextraction based on the solidification of floating organic drop followed by ICP-MS for the simultaneous determination of heavy metals in wastewaters

    Science.gov (United States)

    Li, Yong; Peng, Guilong; He, Qiang; Zhu, Hui; Al-Hamadani, Sulala M. Z. F.

    2015-04-01

    In the present work, a dispersive liquid-liquid microextraction based on the solidification of floating organic drop (DLLME-SFO) combined with inductively coupled plasma mass spectrometry (ICP-MS) was developed for the determination of Pb, Co, Cu, Ni, Zn. The influences of analytical parameters, including pH, extraction solvent volume, disperser solvent volume, concentration of chelating agent on the quantitative recoveries of Pb, Co, Cu, Ni, Zn were investigated. The effect of the interfering ions on the analytes recovery was also investigated. Under the optimized conditions, the limits of detection were 0.97-2.18 ng L-1. The relative standard deviations (RSDs) were 2.62-4.51% (n = 7, C = 20 ng L-1). The proposed method was successfully applied for the analysis of ultra trace metals in wastewater samples.

  5. Capabilities and limitations of dispersive liquid-liquid microextraction with solidification of floating organic drop for the extraction of organic pollutants from water samples.

    Science.gov (United States)

    Vera-Avila, Luz E; Rojo-Portillo, Tania; Covarrubias-Herrera, Rosario; Peña-Alvarez, Araceli

    2013-12-17

    Dispersive liquid-liquid microextraction with solidification of floating organic drop (DLLME-SFO) is one of the most interesting sample preparation techniques developed in recent years. Although several applications have been reported, the potentiality and limitations of this simple and rapid extraction technique have not been made sufficiently explicit. In this work, the extraction efficiency of DLLME-SFO for pollutants from different chemical families was determined. Studied compounds include: 10 polycyclic aromatic hydrocarbons, 5 pesticides (chlorophenoxy herbicides and DDT), 8 phenols and 6 sulfonamides, thus, covering a large range of polarity and hydrophobicity (LogKow 0-7, overall). After optimization of extraction conditions using 1-dodecanol as extractant, the procedure was applied for extraction of each family from 10-mL spiked water samples, only adjusting sample pH as required. Absolute recoveries for pollutants with LogKow 3-7 were >70% and recovery values within this group (18 compounds) were independent of structure or hydrophobicity; the precision of recovery was very acceptable (RSD0.995). Extraction recoveries for pollutants with LogKow 1.46-2.8 were in the range 13-62%, directly depending on individual LogKow values; however, good linearity (r(2)>0.993) and precision (RSD<6.5%) were also demonstrated for these polar solutes, despite recovery level. DLLME-SFO with 1-dodecanol completely failed for extraction of compounds with LogKow≤1 (sulfa drugs), other more polar extraction solvents (ionic liquids) should be explored for highly hydrophilic pollutants. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. Dispersive liquid-liquid microextraction method based on solidification of floating organic drop combined with gas chromatography with electron-capture or mass spectrometry detection.

    Science.gov (United States)

    Leong, Mei-I; Huang, Shang-Da

    2008-11-21

    A simple dispersive liquid-liquid microextraction (DLLME) method based on solidification of a floating organic drop (DLLME-SFO) technique combined with gas chromatography/electron-capture detection (GC/ECD) or gas chromatography/mass spectrometry (GC/MS) has been developed. The proposed method is simple, low in cost, and of high precision. It overcomes the most important problem in DLLME, the high-toxic solvent used. Halogenated organic compounds (HOCs) in water samples were determined as the model compounds. The parameters optimized for the DLLME-SFO technique were as follows: A mixture of 0.5 mL acetone, containing 10 microL 2-dodecanol (2-DD-OH), was rapidly injected by syringe into the 5 mL water sample. After centrifugation, the fine 2-DD-OH droplets (8+/-0.5 microL) were floated at the top of the screwcap test tube. The test tube was then cooled in an ice bath. After 5 min the 2-DD-OH solvent had solidified and was then transferred into a conical vial; it melted quickly at room temperature and 3 microL (for GC/ECD) or 2 microL (for GC/MS) of it was injected into a gas chromatograph for analysis. The limit of detection (LOD) for this technique was 0.005-0.05microgL(-1) for GC/ECD and was 0.005-0.047 microgL(-1) for GC/MS, respectively. The linear range of the calibration curve of DLLME-SFO was from 0.01 to 500 microgL(-1) with a coefficient of estimation (r2)>0.996 for GC/ECD and was from 0.02 to 500 microgL(-1) with a coefficient of estimation (r2)>0.996 for GC/MS.

  7. Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop Followed by Gas Chromatography-Electron Capture Detector for Determination of Some Pesticides in Water Samples

    Directory of Open Access Journals (Sweden)

    Mostafa Bashiri Juybari

    2011-01-01

    Full Text Available In this study dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO followed by gas chromatography-electron capture detection (GC-ECD was developed for determination of some pesticides in the water samples. Some important parameters, such as type and volumes of extraction and disperser solvent and salt effect on the extraction recovery of analytes from aqueous solution were investigated. Under the optimum conditions (extraction solvent: 1-undecanol, 15.0 μL; disperser solvent: acetone, 1.0 mL, and without salt addition, the preconcentration factors were obtained ranged from 802 to 915 for analytes. The linear ranges were from 0.05 to 100 μg L−1, and detection limits ranged from 0.05 to 0.008 μg L−1. The relative standard deviations (RSDs%, =5 were between 3.2% and 6.7%. The proposed method was successfully applied to the determination of target analytes in the tap, sea, and river water samples, and satisfactory recoveries were obtained.

  8. Separation/preconcentration and determination of vanadium with dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) and electrothermal atomic absorption spectrometry.

    Science.gov (United States)

    Asadollahi, Tahereh; Dadfarnia, Shayessteh; Shabani, Ali Mohammad Haji

    2010-06-30

    A novel dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) for separation/preconcentration of ultra trace amount of vanadium and its determination with the electrothermal atomic absorption spectrometry (ETAAS) was developed. The DLLME-SFO behavior of vanadium (V) using N-benzoyl-N-phenylhydroxylamine (BPHA) as complexing agent was systematically investigated. The factors influencing the complex formation and extraction by DLLME-SFO method were optimized. Under the optimized conditions: 100 microL, 200 microL and 25 mL of extraction solvent (1-undecanol), disperser solvent (acetone) and sample volume, respectively, an enrichment factor of 184, a detection limit (based on 3S(b)/m) of 7 ng L(-1) and a relative standard deviation of 4.6% (at 500 ng L(-1)) were obtained. The calibration graph using the preconcentration system for vanadium was linear from 20 to 1000 ng L(-1) with a correlation coefficient of 0.9996. The method was successfully applied for the determination of vanadium in water and parsley.

  9. Indirect spectrophotometric determination of ultra trace amounts of selenium based on dispersive liquid-liquid microextraction-solidified floating organic drop

    Science.gov (United States)

    Haji Shabani, Ali Mohammad; Dadfarnia, Shayessteh; Nozohor, Mahnaz

    2013-12-01

    A novel dispersive liquid-liquid microextraction-solidified floating organic drop (DLLME-SFOD) method combined with fiber optic-linear array detection spectrophotometry has been developed for the indirect determination of selenium. The method is based on the oxidation of the I- to iodine by inorganic Se(IV). The produced I2 reacts with the excess of I- ions in acidic media to give triiodide ions. The I3- is then extracted into 1-undecanol by DLLME-SFOD upon the formation of an ion pair with cetyltrimethylammonium cation. The extracted ion pair is determined by measuring its absorption at 360 nm. The absorbance signal is proportional to the selenium concentration in the aqueous phase. Under optimum conditions, the method provided an enrichment factor of 250 with a detection limit of 16.0 μg L-1 and a linear dynamic range of 40.0-1000.0 μg L-1. The relative standard deviation was found to be 2.1% (n = 7) at 100.0 μg L-1 concentration level. The method was successfully applied to the determination of selenium in water samples and selenium plus tablet.

  10. Solid-Phase Extraction Followed by Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop for the Determination of Parabens.

    Science.gov (United States)

    Hashemi, Beshare; Shamsipur, Mojtaba; Fattahi, Nazir

    2015-09-01

    A dispersive liquid-liquid microextraction based on solidification of floating organic drop method combined with solid-phase extraction (500-mg C18 sorbent) was developed for preconcentration and determination of some parabens. The experimental parameters influencing the extraction efficiency such as the type of extraction and disperser solvents, as well as their volumes, breakthrough volume, flow rate and salt addition were studied and optimized. The optimum experimental conditions found included: sample volume, 100 mL; KCl concentration, 1% (w/v); extraction solvent (1-undecanol) volume, 20 µL and disperser solvent (acetone) volume, 250 µL. Under the optimum experimental conditions, calibration graphs were linear in the range of 1-200 µg L(-1) with limits of detection ranged from 0.3 to 1.7 µg L(-1). The relative standard deviations were in the range of 1.2-3.1% (n = 5). The enrichment factors and absolute recoveries of parabens in different matrices were 245-1886 and 9.0-69.8%, respectively. The method was applied to the simultaneous determination of parabens in different matrices. The relative recoveries from water, shampoo and mouth rinse samples, which have been spiked at different levels of parabens, were 87.83-112.25%, 82.80-108.40% and 90.10-97.60%, respectively. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  11. Rapid extraction and determination of amphetamines in human urine samples using dispersive liquid-liquid microextraction and solidification of floating organic drop followed by high performance liquid chromatography.

    Science.gov (United States)

    Ahmadi-Jouibari, Toraj; Fattahi, Nazir; Shamsipur, Mojtaba

    2014-06-01

    A novel, rapid, simple and sensitive dispersive liquid-liquid microextraction method based on the solidification of floating organic drop (DLLME-SFO) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine amphetamine and methamphetamine in urine samples. The factors affecting the extraction efficiency of DLLME-SFO such as the kind and volume of the extraction and the disperser solvents, effect of concentration of K2CO3 and extraction time were investigated and the optimal extraction conditions were established. Under the optimum conditions (extraction solvent: 30.0μl 1-undecanol; disperser solvent: 300μl acetonitrile; buffer concentration: 2% (w/v) K2CO3 and extraction time: 1min), calibration curves are linear in the range of 10-3000μgl(-1) and limit of detections (LODs) are in the range of 2-8μgl(-1). The relative standard deviations (RSDs) for 100μgl(-1) of amphetamine and methamphetamine in diluted urine are in the range of 6.2-7.8% (n=7). The method was successfully applied for the determination of amphetamine and methamphetamine in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 87.8-113.2%. The obtained results show that DLLME-SFO combined with HPLC-UV is a fast and simple method for the determination of amphetamine and methamphetamine in urine.

  12. Dispersive liquid-liquid microextraction based on solidification of floating organic drop for preconcentration and determination of trace amounts of copper by flame atomic absorption spectrometry.

    Science.gov (United States)

    Karadaş, Cennet; Kara, Derya

    2017-04-01

    A novel, simple, rapid, sensitive, inexpensive and environmentally friendly dispersive liquid-liquid microextraction method based on the solidification of a floating organic drop (DLLME-SFO) was developed for the determination of copper by flame atomic absorption spectrometry (FAAS). N-o-Vanillidine-2-amino-p-cresol was used as a chelating ligand and 1-undecanol was selected as an extraction solvent. The main parameters affecting the performance of DLLME-SFO, such as sample pH, volume of extraction solvent, extraction time, concentration of the chelating ligand, salt effect, centrifugation time and sample volume were investigated and optimized. The effect of interfering ions on the recovery of copper was also examined. Under the optimum conditions, the detection limit (3σ) was 0.93μgL(-1) for Cu using a sample volume of 20mL, yielding a preconcentration factor of 20. The proposed method was successfully applied to the determination of Cu in tap, river and seawater, rice flour and black tea samples as well as certified reference materials.

  13. Optimization of dispersive liquid-phase microextraction based on solidified floating organic drop combined with high-performance liquid chromatography for the analysis of glucocorticoid residues in food.

    Science.gov (United States)

    Huang, Yuan; Zheng, Zhiqun; Huang, Liying; Yao, Hong; Wu, Xiao Shan; Li, Shaoguang; Lin, Dandan

    2017-05-10

    A rapid, simple, cost-effective dispersive liquid-phase microextraction based on solidified floating organic drop (SFOD-LPME) was developed in this study. Along with high-performance liquid chromatography, we used the developed approach to determine and enrich trace amounts of four glucocorticoids, namely, prednisone, betamethasone, dexamethasone, and cortisone acetate, in animal-derived food. We also investigated and optimized several important parameters that influenced the extraction efficiency of SFOD-LPME. These parameters include the extractant species, volumes of extraction and dispersant solvents, sodium chloride addition, sample pH, extraction time and temperature, and stirring rate. Under optimum experimental conditions, the calibration graph exhibited linearity over the range of 1.2-200.0ng/ml for the four analytes, with a reasonable linearity(r(2): 0.9990-0.9999). The enrichment factor was 142-276, and the detection limits was 0.39-0.46ng/ml (0.078-0.23μg/kg). This method was successfully applied to analyze actual food samples, and good spiked recoveries of over 81.5%-114.3% were obtained.

  14. Solidified floating organic drop microextraction (SFODME) for simultaneous separation/preconcentration and determination of cobalt and nickel by graphite furnace atomic absorption spectrometry (GFAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Bidabadi, Mahboubeh Shirani [Department of Chemistry, Yazd University, Safaieh, 89195 Yazd (Iran, Islamic Republic of); Dadfarnia, Shayessteh, E-mail: sdadfarnia@yazduni.ac.ir [Department of Chemistry, Yazd University, Safaieh, 89195 Yazd (Iran, Islamic Republic of); Shabani, Ali Mohammad Haji [Department of Chemistry, Yazd University, Safaieh, 89195 Yazd (Iran, Islamic Republic of)

    2009-07-15

    Solidified floating organic drop microextraction (SFODME), combined with graphite furnace atomic absorption spectrometry (GFAAS) was proposed for simultaneous separation/enrichment and determination of trace amounts of nickel and cobalt in surface waters and sea water. 1-(2-Pyridylazo)-2-naphthol (PAN) was used as chelating agent. The main parameters affecting the performance of SFODME, such as pH, concentration of PAN, extraction time, stirring rate, extraction temperature, sample volume and nature of the solvent were optimized. Under the optimum experimental conditions, a good relative standard deviation for six determination of 20 ng l{sup -1} of Co(II) and Ni(II) were 4.6 and 3.6%, respectively. An enrichment factor of 502 and 497 and detection limits of 0.4 and 0.3 ng l{sup -1} for cobalt and nickel were obtained, respectively. The procedure was applied to tap water, well water, river water and sea water, and accuracy was assessed through the analysis of certified reference water or recovery experiments.

  15. Solidified floating organic drop microextraction (SFODME) for simultaneous separation/preconcentration and determination of cobalt and nickel by graphite furnace atomic absorption spectrometry (GFAAS).

    Science.gov (United States)

    Bidabadi, Mahboubeh Shirani; Dadfarnia, Shayessteh; Shabani, Ali Mohammad Haji

    2009-07-15

    Solidified floating organic drop microextraction (SFODME), combined with graphite furnace atomic absorption spectrometry (GFAAS) was proposed for simultaneous separation/enrichment and determination of trace amounts of nickel and cobalt in surface waters and sea water. 1-(2-Pyridylazo)-2-naphthol (PAN) was used as chelating agent. The main parameters affecting the performance of SFODME, such as pH, concentration of PAN, extraction time, stirring rate, extraction temperature, sample volume and nature of the solvent were optimized. Under the optimum experimental conditions, a good relative standard deviation for six determination of 20 ng l(-1) of Co(II) and Ni(II) were 4.6 and 3.6%, respectively. An enrichment factor of 502 and 497 and detection limits of 0.4 and 0.3 ng l(-1) for cobalt and nickel were obtained, respectively. The procedure was applied to tap water, well water, river water and sea water, and accuracy was assessed through the analysis of certified reference water or recovery experiments.

  16. Simultaneous extraction and quantification of lamotrigine, phenobarbital, and phenytoin in human plasma and urine samples using solidified floating organic drop microextraction and high-performance liquid chromatography.

    Science.gov (United States)

    Asadi, Mohammad; Dadfarnia, Shayessteh; Haji Shabani, Ali Mohammad; Abbasi, Bijan

    2015-07-01

    A novel and simple method based on solidified floating organic drop microextraction followed by high-performance liquid chromatography with ultraviolet detection has been developed for simultaneous preconcentration and determination of phenobarbital, lamotrigine, and phenytoin in human plasma and urine samples. Factors affecting microextraction efficiency such as the type and volume of the extraction solvent, sample pH, extraction time, stirring rate, extraction temperature, ionic strength, and sample volume were optimized. Under the optimum conditions (i.e. extraction solvent, 1-undecanol (40 μL); sample pH, 8.0; temperature, 25°C; stirring rate, 500 rpm; sample volume, 7 mL; potassium chloride concentration, 5% and extraction time, 50 min), the limits of detection for phenobarbital, lamotrigine, and phenytoin were 1.0, 0.1, and 0.3 μg/L, respectively. Also, the calibration curves for phenobarbital, lamotrigine, and phenytoin were linear in the concentration range of 2.0-300.0, 0.3-200.0, and 1.0-200.0 μg/L, respectively. The relative standard deviations for six replicate extractions and determinations of phenobarbital, lamotrigine, and phenytoin at 50 μg/L level were less than 4.6%. The method was successfully applied to determine phenobarbital, lamotrigine, and phenytoin in plasma and urine samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Liquid-liquid Microextraction Based on Solidification of Floating Organic Drops Coupled with Gas Chromatography for Analyzing Trace Benzene, Toluene and Xylene in Water Samples

    Institute of Scientific and Technical Information of China (English)

    ZHANG Mao-sheng; HUANG Jia-rong; ZHENG Xiang-hua; XIE Qiong-fang

    2011-01-01

    A new liquid-liquid microextraction method based on the solidification of floating organic drops coupled with gas chromatography was developed for the determination of trace benzene,toluene and xylene(BTX)in water samples.In the microextraction procedure,a microdrop of n-decanol was delivered to the surface of the analytes' solution,and stirred for a desired time.Following the absolute extraction,the sample vial was cooled in an ice bath for 10 min.The solidified n-decanol was then transferred into a plastic tube and melted naturally; and 1 μL of it was injected into gas chromatography for analysis.Factors relevant to the extraction efficiency were studied and optimized.The optimal experimental conditions were:15 μL of n-decanol as extractive solvent,30 mL of solution containing analytes,no salt,the stirring rate 400 r/min,the extraction temperature 30 ℃,and the extraction time 30 min.Under those optimized conditions,the detection limit(LOD)of analytes was in a range of 0.05-0.10 ng/mL by the developed method.A good linearity(r>0.99)in a calibration range of 0.01-100 μg/mL was obtained.The recoveries of the real samples at different spiked levels of BTX were in the range from 92.2% to 103.4%.

  18. A novel solidified floating organic drop microextraction method for preconcentration and determination of copper ions by flow injection flame atomic absorption spectrometry in water samples

    Directory of Open Access Journals (Sweden)

    Arpa Şahin Ç.

    2013-04-01

    Full Text Available A simple, rapid and inexpensive solidified floating organic drop microextraction (SFODME and flow injection flame atomic absorption spectrometric determination (FI-FAAS method for copper was developed. 3-amino-7-dimethylamino-2-methylphenazine (Neutral red, NR was used as the complexing agent. Several factors affecting the microextraction efficiency, such as, pH, NR and sodium dodecylbenzenesulfonate (SDBS concentration, extraction time, stirring rate, and temperature were investigated and optimized. Under optimized experimental conditions an enrichment factor of 541 was obtained for 100 mL of sample solution. The calibration graph was linear in the range of 0.5 – 20.0 ng mL–1 and the limit of detection (3s was 0.18 ng mL–1, the limit of quantification (10s was 0.58 ng mL–1. The relative standard deviation (RSD for 10 replicate measurements of 10 ng mL–1 copper was 2.7%. The developed method was successfully applied to the extraction and determination of copper in different certified reference materials (Estuarine water, Slew 3 and fortified water, TM 23.2 and real water samples and satisfactory results were obtained.

  19. Solidified floating organic drop microextraction combined with high performance liquid chromatography for the determination of carbamazepine in human plasma and urine samples

    Institute of Scientific and Technical Information of China (English)

    Mohammad ASADI; Ali Mohammad HAJI SHABANI; Shayessteh DADFARNIA; Bijan ABBASI

    2015-01-01

    Solidified floating organic drop microextraction( SFODME)in combination with high performance liquid chromatography was used for separation/preconcentration and determination of carbamazepine( CBZ)in human plasma and urine samples. Parameters that affect the extraction efficiency such as the type and volume of extraction solvent,ionic strength,sodium hydroxide concentration,stirring rate,sample volume and extrac-tion time,were investigated and optimized. Under the optimum conditions( extraction solvent,40 μL of 1-un-decanol;sodium hydroxide concentration,1 mol/L;temperature,50 ℃;stirring speed,400 r/min;sample vol-ume,8 mL;sodium chloride concentration,3%( w/v)and extraction time,60 min)the calibration curve was found to be linear in the mass concentration range of 0. 4-700. 0 μg/L. The limit of detection( LOD)was 0. 1μg/L and the relative standard deviation( RSD)for six replicate extraction and determination of carbamazepine at 100 μg/L level was found to be 4. 1%. The method was successfully applied to the determination of CBZ in human plasma and urine samples.

  20. Vortex-assisted surfactant-enhanced emulsification microextraction based on solidification of floating organic drop combined with high performance liquid chromatography for determination of naproxen and nabumetone.

    Science.gov (United States)

    Asadi, Mohammad; Haji Shabani, Ali Mohammad; Dadfarnia, Shayessteh; Abbasi, Bijan

    2015-12-18

    A novel, rapid, simple and green vortex-assisted surfactant-enhanced emulsification microextraction method based on solidification of floating organic drop was developed for simultaneous separation/preconcentration and determination of ultra trace amounts of naproxen and nabumetone with high performance liquid chromatography-fluorescence detection. Some parameters influencing the extraction efficiency of analytes such as type and volume of extractant, type and concentration of surfactant, sample pH, KCl concentration, sample volume, and vortex time were investigated and optimized. Under optimal conditions, the calibration graph exhibited linearity in the range of 3.0-300.0ngL(-1) for naproxen and 7.0-300.0ngL(-1) for nabumetone with a good coefficient of determination (R(2)>0.999). The limits of detection were 0.9 and 2.1ngL(-1). The relative standard deviations for inter- and intra-day assays were in the range of 5.8-10.1% and 3.8-6.1%, respectively. The method was applied to the determination of naproxen and nabumetone in urine, water, wastewater and milk samples and the accuracy was evaluated through recovery experiments.

  1. A novel solidified floating organic drop microextraction method for preconcentration and determination of copper ions by flow injection flame atomic absorption spectrometry.

    Science.gov (United States)

    Sahin, Ciğdem Arpa; Tokgöz, Ilknur

    2010-05-14

    A rapid, simple and cost effective solidified floating organic drop microextraction (SFODME) and flow injection flame atomic absorption spectrometric determination (FI-FAAS) method for copper was developed. In this method, a free microdrop of 1-undecanol containing 1,5-diphenyl carbazide (DPC) as the complexing agent was transferred to the surface of an aqueous sample including Cu(II) ions, while being agitated by a stirring bar in the bulk of the solution. Under the proper stirring conditions, the suspended microdrop can remain at the top-center position of the aqueous sample. After the completion of the extraction, the sample vial was cooled by placing it in a refrigerator for 10min. The solidified microdrop was then transferred into a conical vial, where it melted immediately and diluted to 300microL with ethanol. Finally, copper ions in 200microL of diluted solution were determined by FI-FAAS. Several factors affecting the microextraction efficiency, such as type of extraction solvent, pH, complexing agent concentration, extraction time, stirring rate, sample volume and temperature were investigated and optimized. Under optimized conditions for 100mL of solution, the preconcentration factor was 333 and the enrichment factor was 324. The limit of detection (3s) was 0.4ngmL(-1), the limit of quantification (10s) was 1.1ngmL(-1) and the relative standard deviation (RSD) for 10 replicate measurements of 10ngmL(-1) copper was 0.9%. The proposed method was successfully applied to the determination of copper in different water samples.

  2. Spectrophotometric determination of iron species using a combination of artificial neural networks and dispersive liquid-liquid microextraction based on solidification of floating organic drop

    Energy Technology Data Exchange (ETDEWEB)

    Moghadam, Masoud Rohani; Shabani, Ali Mohammad Haji [Chemistry Department, Faculty of Science, Yazd University, Yazd (Iran, Islamic Republic of); Dadfarnia, Shayessteh, E-mail: sdadfarnia@yazduni.ac.ir [Chemistry Department, Faculty of Science, Yazd University, Yazd (Iran, Islamic Republic of)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer Combination of DLLME-SFO/fiber optic-linear array detection/chemometric methods. Black-Right-Pointing-Pointer Simultaneous determination of complexes with overlapping spectra. Black-Right-Pointing-Pointer A novel DLLME-SFO method is proposed for extraction of iron species. Black-Right-Pointing-Pointer The extracted iron species are simultaneous determined using PC-ANNs. Black-Right-Pointing-Pointer The enhancement factor of 162 and 125 are achieved for Fe{sup 3+} and Fe{sup 2+}, respectively. - Abstract: A dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) and artificial neural networks method was developed for the simultaneous separation/preconcentration and speciation of iron in water samples. In this method, an appropriate mixture of ethanol (as the disperser solvent) and 1-undecanol (as the extracting solvent) containing appropriate amount of 2-thenoyltrifluoroacetone (TTA) (as the complexing agent) was injected rapidly into the water sample containing iron (II) and iron (III) species. At this step, the iron species interacted with the TTA and extracted into the 1-undecanol. After the phase separation, the absorbance of the extracted irons was measured in the wavelength region of 450-600 nm. The artificial neural networks were then applied for simultaneous determination of individual iron species. Under optimum conditions, the calibration graphs were linear in the range of 95-1070 {mu}g L{sup -1} and 31-350 {mu}g L{sup -1} with detection limits of 25 and 8 {mu}g L{sup -1} for iron (II) and iron (III), respectively. The relative standard deviations (R.S.D., n = 6) were lower than 4.2%. The enhancement factor of 162 and 125 were obtained for Fe{sup 3+} and Fe{sup 2+} ions, respectively. The procedure was applied to power plant drum water and several potable water samples; and accuracy was assessed through the recovery experiments and independent analysis by graphite

  3. Dispersive liquid-liquid microextraction based on solidification of floating organic drop and high-performance liquid chromatography to the analysis of cocaine's major adulterants in human urine.

    Science.gov (United States)

    Sena, Laís Cristina Santana; Matos, Humberto Reis; Dórea, Haroldo Silveira; Pimentel, Maria Fernanda; de Santana, Danielle Cristine Almeida Silva; de Santana, Fernando José Malagueño

    2017-02-01

    A simple method has been proposed for the determination of cocaine's major adulterants (caffeine, levamisole, lidocaine, phenacetin, diltiazem, and hydroxyzine) in human urine by dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) in combination with high-performance liquid chromatography - photodiode array detector (HPLC-PDA). The reversed-phase chromatographic separation was obtained with a column C18 extended (250×4.6mm; 5μm; 80Å) in gradient elution mode using acetonitrile-trifluoroacetic acid 0.026% (v,v) (pH=2.5) at 1mLmin(-1) as mobile phase, at 25°C, and detection at 235nm. The analysis time was 25min. This condition had the best resolution factors (>1.15), retention factors (>0.68), number of plates (>2094.9), and separation factors (>1.05) for all targets, indicating a good separation. The kind of extraction and dispersive solvent were investigated for unifactorial design. The buffer pH, the volume of extraction and disperser solvent, and the amount of salt were optimized for full factorial design. Under optimum conditions, human urine samples were alkalized with 0.5M sodium phosphate buffer (pH 10) and added to sodium chloride (20%m/v). Acetonitrile (150μL) and 1-dodecanol (30μL) were used as dispersive and extraction solvent, respectively. The method presented linear range of 312.5-3125ngmL(-1) to caffeine and levamisole and 187.5-1875ngmL(-1) to lidocaine, phenacetin, diltiazem, and hydroxyzine. The limit of quantification was 187.5ngmL(-1) to lidocaine, phenacetin, diltiazem, and hydroxyzine and 312.5ngmL(-1) for caffeine and levamisole. The recovery mean values were between 6.0 and 42.6%. The method showed good precision and accuracy, with within- and between-run relative standard deviation and relative error less than 15%. The samples were stable after freeze-thaw cycle and short-term room temperature stability tests. Besides, this method was satisfactorily applied in urine of cocaine users. It

  4. Drop floating on a granular raft

    Science.gov (United States)

    Jambon-Puillet, Etienne; Josserand, Christophe; Protiere, Suzie

    2015-11-01

    When a droplet comes in contact with a bath of the same liquid, it coalesces to minimize the surface energy. This phenomenon reduces emulsion stability and is usually fought with surfactant molecules. Another way to slow down coalescence is to use colloidal solid particles. In this case the particles spontaneously migrate to the interface to form ``Pickering'' emulsions and act as a barrier between droplets. Here we use dense, large particles (~ 500 μm) which form a monolayer at an oil/water interface that we call a granular raft. When a droplet is placed on top of such a raft, for a given set of particle properties (contact angle/size), the raft prevents coalescence indefinitely. However, in contrast to what happens when a droplet is placed on a hydrophobic surface and never wets the surface, here the droplet is strongly anchored to the raft and deforms it. We will use this specific configuration to probe the mechanical response of the granular raft: by controlling the droplet volume we can impose tensile or compressive stresses. Finally we will show that the drop, spherical at first, slowly takes a more complex shape as it's volume increases. This shape is not reversible as the drop volume is decreased. The drop can become oblate or prolate with wrinkling of the raft.

  5. A NOVEL METHOD FOR THE DETERMINATION OF TRACE THORIUM BY DISPERSIVE LIQUID-LIQUID MICROEXTRACTION BASED ON SOLIDIFICATION OF FLOATING ORGANIC DROP

    Directory of Open Access Journals (Sweden)

    Mohammad Rezaee

    2016-02-01

    Full Text Available In this study, dispersive liquid-liquid microextraction based on the solidification of floating organic droplets was used for the preconcentration and determination of thorium in the water samples. In this method, acetone and 1-undecanol were used as disperser and extraction solvents, respectively, and the ligand 1-(2-thenoyl-3,3,3-trifluoracetone reagent (TTA and Aliquat 336 was used as a chelating agent and an ion-paring reagent, for the extraction of thorium, respectively. Inductively coupled plasma-optical emission spectrometry was applied for the quantitation of the analyte after preconcentration. The effect of various factors, such as the extraction and disperser solvent, sample pH, concentration of TTA and concentration of aliquat336 were investigated. Under the optimum conditions, the calibration graph was linear within the thorium content range of 1.0-250 µg L-1 with a detection limit of 0.2 µg L-1. The method was also successfully applied for the determination of thorium in the different water samples.

  6. Dispersive liquid-liquid microextraction based on solidification of floating organic drop for simultaneous separation/preconcentration of nickel, cobalt and copper prior to determination by electrothermal atomic absorption spectrometry

    Directory of Open Access Journals (Sweden)

    Mooud Amirkavei

    2013-01-01

    Full Text Available A dispersive liquid-liquid microextraction based on solidification of floating organic drop for simultaneous extraction of trace amounts of nickel, cobalt and copper followed by their determination with electrothermal atomic absorption spectrometry was developed. 300 µL of acetone and 1-undecanol was injected into an aqueous sample containing diethyldithiocarbamate complexes of metal ions. For a sample volume of 10 mL, enrichment factors of 277, 270 and 300 and detection limits of 1.2, 1.1 and 1 ng L-1 for nickel, cobalt and copper were obtained, respectively. The method was applied to the extraction and determination of these metals in different water samples.

  7. Dispersive liquid-liquid microextraction based on solidification of floating organic drop for simultaneous separation/preconcentration of nickel, cobalt and copper prior to determination by electrothermal atomic absorption spectrometry

    Directory of Open Access Journals (Sweden)

    Mooud Amirkavei

    2013-01-01

    Full Text Available A dispersive liquid-liquid microextraction based on solidification of floating organic drop for simultaneous extraction of trace amounts of nickel, cobalt and copper followed by their determination with electrothermal atomic absorption spectrometry was developed. 300 µL of acetone and 1-undecanol was injected into an aqueous sample containing diethyldithiocarbamate complexes of metal ions. For a sample volume of 10 mL, enrichment factors of 277, 270 and 300 and detection limits of 1.2, 1.1 and 1 ng L-1 for nickel, cobalt and copper were obtained, respectively. The method was applied to the extraction and determination of these metals in different water samples.

  8. Dual extraction based on solid phase extraction and solidified floating organic drop microextraction for speciation of arsenic and its distribution in tea leaves and tea infusion by electrothermal vaporization ICP-MS.

    Science.gov (United States)

    Chen, Shizhong; Li, Jianfen; Lu, Dengbo; Zhang, Yan

    2016-11-15

    A dual extraction based on solid phase extraction (SPE) and solidified floating organic drop microextraction (SFODME) was developed for As species in tea leaves and tea infusion by electrothermal vaporization inductively coupled plasma mass spectrometry, including total, suspended, soluble, organic and inorganic As as well as As(III) and As(V). In SPE step, titanium dioxide nanotubes were used for preconcentration of analytes and removal of sample matrix. Elution solution from SPE was employed for further preconcentration and separation of analytes with SFODME. Under optimal conditions, detection limits of this method were 0.046 and 0.072pgmL(-1) with relative standard deviations of 6.3% and 5.8% for As(III) and As(V) (n=9, c=1.0ngmL(-1)), respectively. A preconcentration factor of 500-fold was achieved for As(III) and As(V). This method was successfully applied for analysis of speciation of arsenic and its distribution in tea leaves, tea infusion and certified reference material of tea leaves.

  9. Dispersive liquid-liquid microextraction based on solidification of floating organic drop combined with field-amplified sample injection in capillary electrophoresis for the determination of beta(2)-agonists in bovine urine.

    Science.gov (United States)

    Us, Murat Faruk; Alshana, Usama; Lubbad, Ibrahim; Göğer, Nilgün G; Ertaş, Nusret

    2013-03-01

    Dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) was for the first time combined with field-amplified sample injection (FASI) in CE to determine four β(2)-agonists (cimbuterol, clenbuterol, mabuterol, and mapenterol) in bovine urine. Optimum BGE consisted of 20 mM borate buffer and 0.1 mM SDS. Using salting-out extraction, β(2)-agonists were extracted into ACN that was then used as the disperser solvent in DLLME-SFO. Optimum DLLME-SFO conditions were: 1.0 mL ACN, 50 μL 1-undecanol (extraction solvent), total extraction time 1.5 min, no salt addition. Back extraction into an aqueous solution (pH 2.0) facilitated direct injection of β(2)-agonists into CE. Compared to conventional CZE, DLLME-SFO-FASI-CE achieved sensitivity enhancement factors of 41-1046 resulting in LODs in the range of 1.80-37.0 μg L(-1). Linear dynamic ranges of 0.15-10.0 mg L(-1) for cimbuterol and 15-1000 μg L(-1) for the other analytes were obtained with coefficients of determination (R(2)) ≥ 0.9901 and RSD% ≤5.5 (n = 5). Finally, the applicability of the proposed method was successfully confirmed by determination of the four β(2)-agonists in spiked bovine urine samples and accuracy higher than 96.0% was obtained.

  10. A novel method for the determination of trace copper in cereals by dispersive liquid-liquid microextraction based on solidification of floating organic drop coupled with flame atomic absorption spectrometry

    Institute of Scientific and Technical Information of China (English)

    Chun Xia Wu; Qiu Hua Wu; Chun Wang; Zhi Wang

    2011-01-01

    A novel, simple, rapid, efficient and environment-friendly method for the determination of trace copper in cereal samples was developed by using dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) followed by flame atomic absorption spectrometry. In the DLLME-SFO, copper was complexed with 8-hydroxy quinoline and extracted into a small volume of 1-dodecanol, which is of low density, low toxicity and proper melting point near room temperature. The experimental parameters affecting the extraction efficiency were investigated and optimized. Under the optimum conditions, the calibration graph exhibited linearity over the range of 0.5-500 ng/mL with the correlation coefficient (r) of 0.9996. The enrichment factor was 122 and the limit of detection was 0.1 ng/mL. The method was applied to the determination of copper in the complex matrix samples such as rice and millet with the recoveries for the spiked samples at 5.0 and 10.0 μg/g falling in the range of 92.0-98.0% and the relative standard deviation of 3.9-5.7%.

  11. Simultaneous extraction and determination of albendazole and triclabendazole by a novel syringe to syringe dispersive liquid phase microextraction-solidified floating organic drop combined with high performance liquid chromatography.

    Science.gov (United States)

    Asadi, Mohammad; Dadfarnia, Shayessteh; Haji Shabani, Ali Mohammad

    2016-08-17

    A syringe to syringe dispersive liquid phase microextraction-solidified floating organic drop was introduced and used for the simultaneous extraction of trace amounts of albendazole and triclabendazole from different matrices. The extracted analytes were determined by high performance liquid chromatography along with fluorescence detection. The analytical parameters affecting the microextraction efficiency including the nature and volume of the extraction solvent, sample volume, sample pH, ionic strength and the cycles of extraction were optimized. The calibration curves were linear in the range of 0.1-30.0 μg L(-1) and 0.2-30.0 μg L(-1) with determination coefficients of 0.9999 and 0.9998 for albendazole and triclabendazole respectively. The detection limits defined as three folds of the signal to noise ratio were found to be 0.02 μg L(-1) for albendazole and 0.06 μg L(-1) for triclabendazole. The inter-day and intra-day precision (RSD%) for both analytes at three concentration levels (0.5, 2.0 and 10.0 μg L(-1)) were in the range of 6.3-10.1% and 5.0-7.5% respectively. The developed method was successfully applied to determine albendazole and triclabendazole in water, cow milk, honey, and urine samples.

  12. Speciation of As(III) and As(V) in water samples by graphite furnace atomic absorption spectrometry after solid phase extraction combined with dispersive liquid-liquid microextraction based on the solidification of floating organic drop.

    Science.gov (United States)

    Shamsipur, Mojtaba; Fattahi, Nazir; Assadi, Yaghoub; Sadeghi, Marzieh; Sharafi, Kiomars

    2014-12-01

    A solid phase extraction (SPE) coupled with dispersive liquid-liquid microextraction based on the solidification of floating organic drop (DLLME-SFO) method, using diethyldithiphosphate (DDTP) as a proper chelating agent, has been developed as an ultra preconcentration technique for the determination of inorganic arsenic in water samples prior to graphite furnace atomic absorption spectrometry (GFAAS). Variables affecting the performance of both steps were thoroughly investigated. Under optimized conditions, 100mL of As(ΙΙΙ) solution was first concentrated using a solid phase sorbent. The extract was collected in 2.0 mL of acetone and 60.0 µL of 1-undecanol was added into the collecting solvent. The mixture was then injected rapidly into 5.0 mL of pure water for further DLLME-SFO. Total inorganic As(III, V) was extracted similarly after reduction of As(V) to As(III) with potassium iodide and sodium thiosulfate and As(V) concentration was calculated by difference. A mixture of Pd(NO3)2 and Mg(NO3)2 was used as a chemical modifier in GFAAS. The analytical characteristics of the method were determined. The calibration graph was linear in the rage of 10-100 ng L(-1) with detection limit of 2.5 ng L(-1). Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 80 ng L(-1) of As(ΙΙΙ) were 6.8% and 7.5%, respectively. The method was successfully applied to speciation of As(III), As(V) and determination of the total amount of As in water samples and in a certified reference material (NIST RSM 1643e).

  13. Development of Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop for the Sensitive Determination of Trace Copper in Water and Beverage Samples by Flame Atomic Absorption Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Chunxia; Zhao, Bin; Li, Yingli; Wu, Qiuhua; Wang, Chun; Wang, Zhi [Agricultural University of Hebei, Baoding (China)

    2011-03-15

    A dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) has been developed as a new approach for the extraction of trace copper in water and beverage samples followed by the determination with flame atomic absorption spectrometry. In the DLLME-SFO, 8-hydroxy quinoline, 1-dodecanol, and methanol were used as chelating agent, extraction solvent and dispersive solvent, respectively. The experimental parameters related to the DLLME-SFO such as the type and volume of the extraction and dispersive solvent, extraction time, sample volume, the concentration of chelating agent and salt addition were investigated and optimized. Under the optimum conditions, the enrichment factor for copper was 122. The method was linear in the range from 0.5 to 300 ng mL{sup -1} of copper in the samples with a correlation coefficient (r) of 0.9996 and a limit of detection of 0.1 ng mL{sup -1}. The method was applied to the determination of copper in water and beverage samples. The recoveries for the spiked water and beverage samples at the copper concentration levels of 5.0 and 10.0 ng mL{sup -1} were in the range between 92.0% and 108.0%. The relative standard deviations (RSD) varied from 3.0% to 5.6%.

  14. Mutual adaptation of a Faraday instability pattern with its flexible boundaries in floating fluid drops

    CERN Document Server

    Pucci, Giuseppe; Amar, Martine Ben; Couder, Yves; 10.1103/PhysRevLett.106.024503

    2013-01-01

    Hydrodynamic instabilities are usually investigated in confined geometries where the resulting spatiotemporal pattern is constrained by the boundary conditions. Here we study the Faraday instability in domains with flexible boundaries. This is implemented by triggering this instability in floating fluid drops. An interaction of Faraday waves with the shape of the drop is observed, the radiation pressure of the waves exerting a force on the surface tension held boundaries. Two regimes are observed. In the first one there is a coadaptation of the wave pattern with the shape of the domain so that a steady configuration is reached. In the second one the radiation pressure dominates and no steady regime is reached. The drop stretches and ultimately breaks into smaller domains that have a complex dynamics including spontaneous propagation.

  15. Application of vesicular coacervate phase for microextraction based on solidification of floating drop.

    Science.gov (United States)

    Moradi, Morteza; Yamini, Yadollah

    2012-03-16

    A new, efficient and environmentally friendly method for the analysis of parabens as model compounds was developed using solidified floating vesicular coacervative drop microextraction (SFVCDME). A supramolecular solvent consisting of vesicles of decanoic acid in the nano- and microscale regimes was firstly used as the solvent in solidification of floating drop microextraction. The solvent was produced from the coacervation of decanoic acid aqueous vesicles in the presence of tetrabutylammonium (Bu(4)N(+)). Methylparaben (MP), ethylparaben (EP), and propylparaben (PP) were extracted on the basis of hydrophobic and π-cation interactions and the formation of hydrogen bonds. Microliter volume of vesicular coacervative droplet was delivered to the surface of the aqueous sample, and the sample was stirred for a desired time. The sample vial was cooled by immersing it into an ice bath for 3 min. The solidified solvent was transferred into a suitable vial and melted immediately. Twenty microliter of the vesicular coacervative solvent was directly injected to high-performance liquid chromatography-ultraviolet detection, with no need to dilution or solvent evaporation. Several parameters affecting the microextraction efficiency including sample temperature, stirring rate, pH, salt effect, volume of the solvent and extraction time were investigated and optimized. Under optimum conditions, preconcentration factors and relative recoveries of the studied compounds were obtained in the range of 81-174 and 91-108%, respectively; and the performance of the method was comparable with that of solid-phase extraction as the reference method.

  16. Organic nano-floating-gate transistor memory with metal nanoparticles

    Science.gov (United States)

    Van Tho, Luu; Baeg, Kang-Jun; Noh, Yong-Young

    2016-04-01

    Organic non-volatile memory is advanced topics for various soft electronics applications as lightweight, low-cost, flexible, and printable solid-state data storage media. As a key building block, organic field-effect transistors (OFETs) with a nano-floating gate are widely used and promising structures to store digital information stably in a memory cell. Different types of nano-floating-gates and their various synthesis methods have been developed and applied to fabricate nanoparticle-based non-volatile memory devices. In this review, recent advances in the classes of nano-floating-gate OFET memory devices using metal nanoparticles as charge-trapping sites are briefly reviewed. Details of device fabrication, characterization, and operation mechanisms are reported based on recent research activities reported in the literature.

  17. Determination of trace cadmium by dispersive liquid-liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry%浮动液滴固化分散液相微萃取-火焰原子吸收光谱法测定环境样品中的镉

    Institute of Scientific and Technical Information of China (English)

    秦九红; 杨君; 向国强

    2011-01-01

    A new method was established to determine trace cadmium in environmental samples by combining dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) with flame atomic absorption spectrometry (FAAS). The main parameters affecting the performance of DLLME-SFO, such as type and volume of extraction solvent,pH, concentration of chelating agent, extraction temperature and time, were investigated. It was found that, under the optimized experimental conditions, the method had a detection limit (3σ) of 0.14 μg/L, linear range of 2.0-50.0 μg/L, relative standard deviation (RSD) of 2. 5 /% (c = 10.0 μg/L, n = 7), and enrichment factor of 18. The method was successfully applied to determine trace cadmium in the certified reference water sample (GBW(E) 080531) and various to-be-tested water samples. The analytical result for the certified reference water sample was in good agreement with the certified value, and the recoveries for the spiked water samples were in a range of 94 %-103 %.%建立了以十一醇为萃取剂,吡咯烷二硫代甲酸铵(APDC)为螯合剂的浮动液滴固化分散液相微萃取-火焰原子吸收光谱法(DLLME-SFO-FAAS)测定环境样品中痕量镉的分析方法;优化了分散剂、萃取剂的类型和体积,考察了溶液pH值、APDC浓度以及萃取温度和时间对萃取效率的影响.结果表明,该法检出限(3σ)为0.14μg/L,相对标准偏差RSD为2.5%(c=10.0 μg/L,n=7),线性范围为2.0~50.0 μg/L,富集倍数18.将其用于水中镉标准物质(GBW(E)080531)和实际环境水样中痕量镉的测定,测定值与标准值吻合良好,实际样品的加标回收率为94%~103%.

  18. Dispersive liquid-liquid microextraction based on the solidification of floating organic drop followed by combined with atomic absorption spectrometry as a fast technique for the simultaneous determination of heavy metals ions%分散液液微萃取浮动溶剂固化——原子吸收光谱法测定环境水体样品中的重金属

    Institute of Scientific and Technical Information of China (English)

    陈飞

    2012-01-01

    采用了十一醇为萃取剂,吡咯烷二硫代甲酸铵(APDC)为络合剂的分散液液微萃取浮动溶剂固化一石墨炉原子吸收光谱法(DLLME—SFO—GFAAS)测定水体样品中痕量金属离子的分析方法,对实验条件进行了优化,改进了传统萃取方法中试剂用量大、手续繁琐、易交叉感染等不足。同时对方法测量检出限及回收率进行试验,结果表明在优化的实验条件下铜、镉、铅的检出限分别0.03μg/L、0.03μ/L和0.01μg/L,加标回收率在95.3%~102.4%,方法准确、可靠。%A new method was established to determine trace metal ions in water samples by combining dispersive liquid-liquid based on solidification of floating organic drop (DLLME-SFO) with atomic absorption spectrometry (GFAAS) The method solves the problems in conventional extraction methods, such as massive use of reagents, complicated procedure, aptness to cross infection, etc.Meanwhile, the average recoveries for four water samples tested with adding standards were form 95.3%--102.4%. The detection limits estimated with 3-fold standard deviation were from 0.01μg/L --0.03 μg/ L. Conclusion: this method is easy to operate with precise results, which was suitable for the measurement of trace metal ions in water samples.

  19. Photobleaching Kinetics of Chromophoric Dissolved Organic Matter Derived from Mangrove Leaf Litter and Floating Sargassum Colonies

    Science.gov (United States)

    We examined the photoreactivity of chromophoric dissolved organic matter (CDOM) derived from Rhizophora mangle (red mangrove) leaf litter and floating Sargassum colonies as these marine plants can be important contributors to coastal and open ocean CDOM pools, respectively. Mangr...

  20. Organic field-effect transistor nonvolatile memories utilizing sputtered C nanoparticles as nano-floating-gate

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jie; Liu, Chang-Hai; She, Xiao-Jian; Sun, Qi-Jun; Gao, Xu; Wang, Sui-Dong, E-mail: wangsd@suda.edu.cn [Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, Jiangsu 215123 (China)

    2014-10-20

    High-performance organic field-effect transistor nonvolatile memories have been achieved using sputtered C nanoparticles as the nano-floating-gate. The sputtered C nano-floating-gate is prepared with low-cost material and simple process, forming uniform and discrete charge trapping sites covered by a smooth and complete polystyrene layer. The devices show large memory window, excellent retention capability, and programming/reading/erasing/reading endurance. The sputtered C nano-floating-gate can effectively trap both holes and electrons, and it is demonstrated to be suitable for not only p-type but also n-type organic field-effect transistor nonvolatile memories.

  1. Ambipolar organic thin-film transistor-based nano-floating-gate nonvolatile memory

    Energy Technology Data Exchange (ETDEWEB)

    Han, Jinhua; Wang, Wei, E-mail: wwei99@jlu.edu.cn; Ying, Jun; Xie, Wenfa [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)

    2014-01-06

    An ambipolar organic thin-film transistor-based nano-floating-gate nonvolatile memory was demonstrated, with discrete distributed gold nanoparticles, tetratetracontane (TTC), pentacene as the floating-gate layer, tunneling layer, and active layer, respectively. The electron traps at the TTC/pentacene interface were significantly suppressed, which resulted in an ambipolar operation in present memory. As both electrons and holes were supplied in the channel and trapped in the floating-gate by programming/erasing operations, respectively, i.e., one type of charge carriers was used to overwrite the other, trapped, one, a large memory window, extending on both sides of the initial threshold voltage, was realized.

  2. Stirring-controlled solidified floating solid-liquid drop microextraction as a new solid phase-enhanced liquid-phase microextraction method by exploiting magnetic carbon nanotube-nickel hybrid.

    Science.gov (United States)

    Ghazaghi, Mehri; Mousavi, Hassan Zavvar; Shirkhanloo, Hamid; Rashidi, Alimorad

    2017-01-25

    A specific technique is introduced to overcome limitations of classical solidification of floating organic drop microextraction, such as tedious and time-consuming centrifuge step and using disperser solvent, by facile and efficient participation of solid and liquid phases. In this proposed method of stirring-controlled solidified floating solid-liquid drop microextraction (SC-SF-SLDME), magnetic carbon nanotube-nickel hybrid (MNi-CNT) as a solid part of the extractors are dispersed ultrasonically in sample solution, and the procedure followed by dispersion of liquid phase (1-undecanol) through high-rate stirring and easily recollection of MNi-CNT in organic solvent droplets through hydrophobic force. With the reduction in speed of stirring, one solid-liquid drop is formed on top of the solution. MNi-CNT acts as both extractor and the coalescence helper between organic droplets for a facile recollection. MNi-CNT was prepared by spray pyrolysis of nickel oleate/toluene mixture at 1000 °C. Four tyrosine kinase inhibitors were selected as model analytes and the effecting parameters were investigated. The results confirmed that magnetic nanoadsorbent has an important role in the procedure and complete collection of dispersed solvent is not achieved in the absence of the solid phase. Also, short extraction time exhibited success of the proposed method and effect of dispersed solid/liquid phases. The limits of quantification (LOQs) for imatinib, sunitinib, erlotinib, and nilotinib were determined to be as low as 0.7, 1.7, 0.6, and 1.0 μg L(-1), respectively. The intra-day precisions (RSDs) were lower than 4.5%. Method performance was investigated by determination of mentioned tyrosine kinase inhibitors (TKIs) in human serum and cerebrospinal fluid samples with good recoveries in the range of 93-98%.

  3. Molecular floating-gate organic nonvolatile memory with a fully solution processed core architecture

    Science.gov (United States)

    Wu, Chao; Wang, Wei; Song, Junfeng

    2016-11-01

    In this paper, we demonstrated a floating-gate organic thin film transistor based nonvolatile memory, in which the core architecture was processed by a sequential three-step solution spin-coating method. The molecular semiconductor 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pen) distributing in the matrix of polymer poly(styrene) (PS), acting as the floating-gate and tunneling layer, respectively, was processed by one-step spin-coating from their blending solution. The effect of the proportion of TIPS-Pen in the matrix of PS on the memory performances of devices was researched. As a result, a good nonvolatile memory was achieved, with a memory window larger than 25 V, stable memory endurance property over 500 cycles and retention time longer than 5000 s with a high memory ratio larger than 102, at an optimal proportion of TIPS-Pen in the matrix of PS.

  4. Ignition of a floating droplet of organic coal-water fuel

    Science.gov (United States)

    Nakoryakov, V. E.; Kuznetsov, G. V.; Strizhak, P. A.

    2016-06-01

    The results of experimental investigations are presented for the ignition of droplets (particles) of organic coal-water fuels (OCWFs) floating in a flow of an oxidizer using a special combustion chamber from high-temperature quartz glass. The temperature and the velocity of motion of the oxidizer vary in the ranges of 500-900 K and 0.5-3 m/s. The initial sizes (radii) of fuel droplets amounted to 0.3-1.5 mm. As the basic OCWF components, particles (of 80-100 µm in size) of brown coal "B2," water, mazut, and waste castor and compressor oils are used. With use of the system of high-velocity video registration, the conditions providing for floating of OCWF particles without initiation of burning and with the subsequent steady ignition are established. Four modes of OCWF-droplet ignition with different trajectories of their motion in the combustion chamber are singled out. The times of the OCWF-ignition delay in dependence on the size of fuel particles and oxidizer temperatures are determined. The deviations of the OCWF-ignition-delay times obtained under conditions of suspension of a droplet on the thermocouple junction and while floating in the oxidizer flow are established.

  5. Organic matter evolution throughout a 100-cm ombrotrophic profile from an Italian floating mire

    Science.gov (United States)

    Zaccone, Claudio; D'Orazio, Valeria; Lobianco, Daniela; Miano, Teodoro M.

    2015-04-01

    The curious sight of an island floating and moving on a lake naturally, already described by Pliny the Elder in his Naturalis historia (AD 77-79), fascinated people from time immemorial. Floating mires are defined by the occurrence of emergent vegetation rooted in highly organic buoyant mats that rise and fall with changes in water level. Peat-forming floating mires could provide an exceptional tool for environmental studies, since much of their evolution, as well as the changes of the surrounding areas, is recorded in their peat deposits. A complete, 4-m deep peat core was collected in July 2012 from the floating island of Posta Fibreno, a relic mire in the Central Italy. This floating island has a diameter of ca. 30 m, a submerged thickness of about 3 m, and the vegetation is organized in concentric belts, from the Carex paniculata palisade to the Sphagnum centre. Here, some of the southernmost Italian populations of Sphagnum palustre occur. The 14C age dating of macrofossils removed from the sample at 360 cm of depth revealed that the island probably formed more than 500 yrs ago (435±20 yr BP). In the present work, we show preliminary results regarding the evolution of the organic matter along the first, ombrotrophic 100 cm of depth, hoping also to provide some insight into the possible mechanism of the evolution of this floating island. The 100 cm monolith was collected using a Wardenaar corer and cut frozen in 1-cm layers. It consists almost exclusively of Sphagnum mosses, often spaced out, in the top 20-30 cm, by leaves of Populus tremula that annually fell off. This section shows a very low bulk density, ranging from 0.017 and 0.059 g cm-3 (avg. value, 0.03±0.01 g cm-3), an average water content of 96.1±1.1%, and a gravimetric water content ranging between 14.3 and 41.5 gwater gdrypeat-1. The pH of porewaters was in the range 5-5.5. The C content along the profile ranged between 35 and 47% (avg., 41±1%), whereas the N between 0.3 and 0.9% (avg., 0.6±0

  6. Occurrence of organic arsenic species in a 4-m deep free-floating mire

    Science.gov (United States)

    Lobianco, Daniela; Zaccone, Claudio; Raber, Georg; D'Orazio, Valeria; Miano, Teodoro; Francesconi, Kevin

    2017-04-01

    Wetlands play a key role in the fate of major and trace elements, affecting their environmental mobility and ecotoxicity. Arsenic (As) is a chalcophile element that is recognized as a serious health risk worldwide. Inorganic forms of this metalloid are dominant in soils, whereas the organic forms generally occur only in trace amounts. Nevertheless, methylation processes are responsible for the mobilization of As in several ecosystems, especially in anoxic conditions. Peat cores from ombrotrophic bogs have been used to determine atmospheric depositional fluxes of total As over centuries, although the contribution of organic vs inorganic As species has been rarely considered. Here, 47 peat samples collected throughout a 400-cm deep, free-floating mire have been analysed for total As and for its organic species, including dimethylarsinic acid (DMA), methylarsonic acid (MA), trimethylarsine oxide (TMAO) and arsenobetaine (AB) by HPLC-ICP-MS. Total As concentration throughout the profile ranged between 0.20 and 9.79 mg/kg (1.41±1.36 mg/kg; mean ± st. dev.), showing values that are quite low compared to other mire ecosystems. Organic As species (DMA+MA+TMAO+AB) account, on average, for 28±10% of total As (range 6-47%; median 28%), and for 41±14% of the extracted As (range 7-73%; median 42%). The relative abundance of organoarsenicals generally followed the order DMA>TMAO˜MA>>AB, and was not correlated with main physical and chemical properties of peat, including its degree of decomposition. There was, however, a highly significant (p <0.001) statistical correlation among all organic As compounds. This result provides new insights into the occurrence of organic As species in floating mires, suggesting a possible common biological pathway for their formation.

  7. Ignition of an organic water-coal fuel droplet floating in a heated-air flow

    Science.gov (United States)

    Valiullin, T. R.; Strizhak, P. A.; Shevyrev, S. A.; Bogomolov, A. R.

    2017-01-01

    Ignition of an organic water-coal fuel (CWSP) droplet floating in a heated-air flow has been studied experimentally. Rank B2 brown-coal particles with a size of 100 μm, used crankcase Total oil, water, and a plasticizer were used as the main CWSP components. A dedicated quartz-glass chamber has been designed with inlet and outlet elements made as truncated cones connected via a cylindrical ring. The cones were used to shape an oxidizer flow with a temperature of 500-830 K and a flow velocity of 0.5-5.0 m/s. A technique that uses a coordinate-positioning gear, a nichrome thread, and a cutter element has been developed for discharging CWSP droplets into the working zone of the chamber. Droplets with an initial size of 0.4 to 2.0 mm were used. Conditions have been determined for a droplet to float in the oxidizer flow long enough for the sustainable droplet burning to be initiated. Typical stages and integral ignition characteristics have been established. The integral parameters (ignition-delay times) of the examined processes have been compared to the results of experiments with CWSP droplets suspended on the junction of a quick-response thermocouple. It has been shown that floating fuel droplets ignite much quicker than the ones that sit still on the thermocouple due to rotation of an CWSP droplet in the oxidizer flow, more uniform heating of the droplet, and lack of heat drainage towards the droplet center. High-speed video recording of the peculiarities of floatation of a burning fuel droplet makes it possible to complement the existing models of water-coal fuel burning. The results can be used for a more substantiated modeling of furnace CWSP burning with the ANSYS, Fluent, and Sigma-Flow software packages.

  8. Intestinal epithelial organoids fuse to form self-organizing tubes in floating collagen gels.

    Science.gov (United States)

    Sachs, Norman; Tsukamoto, Yoshiyuki; Kujala, Pekka; Peters, Peter J; Clevers, Hans

    2017-03-15

    Multiple recent examples highlight how stem cells can self-organize in vitro to establish organoids that closely resemble their in vivo counterparts. Single Lgr5(+) mouse intestinal stem cells can be cultured under defined conditions forming ever-expanding epithelial organoids that retain cell polarization, cell type diversity and anatomical organization of the in vivo epithelium. Although exhibiting a remarkable level of self-organization, the so called 'mini-guts' have a closed cystic structure of microscopic size. Here, we describe a simple protocol to generate macroscopic intestinal tubes from small cystic organoids. Embedding proliferating organoids within a contracting floating collagen gel allows them to align and fuse to generate macroscopic hollow structures ('tubes') that are lined with a simple epithelium containing all major cell types (including functional stem cells) of the small intestine. Cells lining the central contiguous lumen closely resemble the epithelial cells on luminal villi in vivo, whereas buds that protrude from the main tube into the surrounding matrix closely resemble crypts. Thus, the remarkable self-organizing properties of Lgr5(+) stem cells extend beyond the level of the microscopic cystic organoid to the next, macroscopic, level of tube formation. © 2017. Published by The Company of Biologists Ltd.

  9. Effect of tunneling layers on the performances of floating-gate based organic thin-film transistor nonvolatile memories

    Science.gov (United States)

    Wang, Wei; Han, Jinhua; Ying, Jun; Xiang, Lanyi; Xie, Wenfa

    2014-09-01

    Two types of floating-gate based organic thin-film transistor nonvolatile memories (FG-OTFT-NVMs) were demonstrated, with poly(methyl methacrylate co glycidyl methacrylate) (P(MMA-GMA)) and tetratetracontane (TTC) as the tunneling layer, respectively. Their device performances were measured and compared. In the memory with a P(MMA-GMA) tunneling layer, typical unipolar hole transport was obtained with a relatively small mobility of 0.16 cm2/V s. The unidirectional shift of turn-on voltage (Von) due to only holes trapped/detrapped in/from the floating gate resulted in a small memory window of 12.5 V at programming/erasing voltages (VP/VE) of ±100 V and a nonzero reading voltage. Benefited from the well-ordered molecule orientation and the trap-free surface of TTC layer, a considerably high hole mobility of 1.7 cm2/V s and a visible feature of electrons accumulated in channel and trapped in floating-gate were achieved in the memory with a TTC tunneling layer. High hole mobility resulted in a high on current and a large memory on/off ratio of 600 at the VP/VE of ±100 V. Both holes and electrons were injected into floating-gate and overwritten each other, which resulted in a bidirectional Von shift. As a result, an enlarged memory window of 28.6 V at the VP/VE of ±100 V and a zero reading voltage were achieved. Based on our results, a strategy is proposed to optimize FG-OTFT-NVMs by choosing a right tunneling layer to improve the majority carrier mobility and realize ambipolar carriers injecting and trapping in the floating-gate.

  10. Effect of tunneling layers on the performances of floating-gate based organic thin-film transistor nonvolatile memories

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei, E-mail: wwei99@jlu.edu.cn; Han, Jinhua; Ying, Jun; Xiang, Lanyi; Xie, Wenfa [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)

    2014-09-22

    Two types of floating-gate based organic thin-film transistor nonvolatile memories (FG-OTFT-NVMs) were demonstrated, with poly(methyl methacrylate co glycidyl methacrylate) (P(MMA-GMA)) and tetratetracontane (TTC) as the tunneling layer, respectively. Their device performances were measured and compared. In the memory with a P(MMA-GMA) tunneling layer, typical unipolar hole transport was obtained with a relatively small mobility of 0.16 cm{sup 2}/V s. The unidirectional shift of turn-on voltage (V{sub on}) due to only holes trapped/detrapped in/from the floating gate resulted in a small memory window of 12.5 V at programming/erasing voltages (V{sub P}/V{sub E}) of ±100 V and a nonzero reading voltage. Benefited from the well-ordered molecule orientation and the trap-free surface of TTC layer, a considerably high hole mobility of 1.7 cm{sup 2}/V s and a visible feature of electrons accumulated in channel and trapped in floating-gate were achieved in the memory with a TTC tunneling layer. High hole mobility resulted in a high on current and a large memory on/off ratio of 600 at the V{sub P}/V{sub E} of ±100 V. Both holes and electrons were injected into floating-gate and overwritten each other, which resulted in a bidirectional V{sub on} shift. As a result, an enlarged memory window of 28.6 V at the V{sub P}/V{sub E} of ±100 V and a zero reading voltage were achieved. Based on our results, a strategy is proposed to optimize FG-OTFT-NVMs by choosing a right tunneling layer to improve the majority carrier mobility and realize ambipolar carriers injecting and trapping in the floating-gate.

  11. High-Performance Flexible Organic Nano-Floating Gate Memory Devices Functionalized with Cobalt Ferrite Nanoparticles.

    Science.gov (United States)

    Jung, Ji Hyung; Kim, Sunghwan; Kim, Hyeonjung; Park, Jongnam; Oh, Joon Hak

    2015-10-07

    Nano-floating gate memory (NFGM) devices are transistor-type memory devices that use nanostructured materials as charge trap sites. They have recently attracted a great deal of attention due to their excellent performance, capability for multilevel programming, and suitability as platforms for integrated circuits. Herein, novel NFGM devices have been fabricated using semiconducting cobalt ferrite (CoFe2O4) nanoparticles (NPs) as charge trap sites and pentacene as a p-type semiconductor. Monodisperse CoFe2O4 NPs with different diameters have been synthesized by thermal decomposition and embedded in NFGM devices. The particle size effects on the memory performance have been investigated in terms of energy levels and particle-particle interactions. CoFe2O4 NP-based memory devices exhibit a large memory window (≈73.84 V), a high read current on/off ratio (read I(on)/I(off)) of ≈2.98 × 10(3), and excellent data retention. Fast switching behaviors are observed due to the exceptional charge trapping/release capability of CoFe2O4 NPs surrounded by the oleate layer, which acts as an alternative tunneling dielectric layer and simplifies the device fabrication process. Furthermore, the NFGM devices show excellent thermal stability, and flexible memory devices fabricated on plastic substrates exhibit remarkable mechanical and electrical stability. This study demonstrates a viable means of fabricating highly flexible, high-performance organic memory devices. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Direct probing of electron and hole trapping into nano-floating-gate in organic field-effect transistor nonvolatile memories

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Ze-Qun; Wang, Shun; Chen, Jian-Mei; Gao, Xu; Dong, Bin, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn; Chi, Li-Feng, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn; Wang, Sui-Dong, E-mail: wangsd@suda.edu.cn, E-mail: chilf@suda.edu.cn, E-mail: bdong@suda.edu.cn [Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, Jiangsu 215123 (China)

    2015-03-23

    Electron and hole trapping into the nano-floating-gate of a pentacene-based organic field-effect transistor nonvolatile memory is directly probed by Kelvin probe force microscopy. The probing is straightforward and non-destructive. The measured surface potential change can quantitatively profile the charge trapping, and the surface characterization results are in good accord with the corresponding device behavior. Both electrons and holes can be trapped into the nano-floating-gate, with a preference of electron trapping than hole trapping. The trapped charge quantity has an approximately linear relation with the programming/erasing gate bias, indicating that the charge trapping in the device is a field-controlled process.

  13. Stable charge storing in two-dimensional MoS2 nanoflake floating gates for multilevel organic flash memory

    Science.gov (United States)

    Kang, Minji; Kim, Yeong-A.; Yun, Jin-Mun; Khim, Dongyoon; Kim, Jihong; Noh, Yong-Young; Baeg, Kang-Jun; Kim, Dong-Yu

    2014-10-01

    In this study, we investigated chemically exfoliated two-dimensional (2-D) nanoflakes of molybdenum disulfide (MoS2) as charge-storing elements for use in organic multilevel memory devices (of the printed/flexible non-volatile type) based on organic field-effect transistors (OFETs) containing poly(3-hexylthiophene) (P3HT). The metallic MoS2 nanoflakes were exfoliated in 2-methoxyethanol by the lithium intercalation method and were deposited as nano-floating gates between polystyrene and poly(methyl methacrylate), used as bilayered gate dielectrics, by a simple spin-coating and low temperature (102 times, and most importantly, quasi-permanent charge-storing characteristics, i.e., a very long retention time (longer than the technological requirement of commercial memory devices (>10 years)). In addition, we successfully developed multilevel memory cells (2 bits per cell) by controlling the gate bias magnitude.In this study, we investigated chemically exfoliated two-dimensional (2-D) nanoflakes of molybdenum disulfide (MoS2) as charge-storing elements for use in organic multilevel memory devices (of the printed/flexible non-volatile type) based on organic field-effect transistors (OFETs) containing poly(3-hexylthiophene) (P3HT). The metallic MoS2 nanoflakes were exfoliated in 2-methoxyethanol by the lithium intercalation method and were deposited as nano-floating gates between polystyrene and poly(methyl methacrylate), used as bilayered gate dielectrics, by a simple spin-coating and low temperature (102 times, and most importantly, quasi-permanent charge-storing characteristics, i.e., a very long retention time (longer than the technological requirement of commercial memory devices (>10 years)). In addition, we successfully developed multilevel memory cells (2 bits per cell) by controlling the gate bias magnitude. Electronic supplementary information (ESI) available: The memory characteristics with thickness of MoS2 nanoflakes as nano-floating-gate. See DOI: 10.1039/c

  14. Drop out from out-patient mental healthcare in the World Health Organization's World Mental Health Survey initiative.

    Science.gov (United States)

    Wells, J Elisabeth; Browne, Mark Oakley; Aguilar-Gaxiola, Sergio; Al-Hamzawi, Ali; Alonso, Jordi; Angermeyer, Matthias C; Bouzan, Colleen; Bruffaerts, Ronny; Bunting, Brendan; Caldas-de-Almeida, José Miguel; de Girolamo, Giovanni; de Graaf, Ron; Florescu, Silvia; Fukao, Akira; Gureje, Oye; Hinkov, Hristo Ruskov; Hu, Chiyi; Hwang, Irving; Karam, Elie G; Kostyuchenko, Stanislav; Kovess-Masfety, Viviane; Levinson, Daphna; Liu, Zhaorui; Medina-Mora, Maria Elena; Nizamie, S Haque; Posada-Villa, José; Sampson, Nancy A; Stein, Dan J; Viana, Maria Carmen; Kessler, Ronald C

    2013-01-01

    Previous community surveys of the drop out from mental health treatment have been carried out only in the USA and Canada. To explore mental health treatment drop out in the World Health Organization World Mental Health Surveys. Representative face-to-face household surveys were conducted among adults in 24 countries. People who reported mental health treatment in the 12 months before interview (n = 8482) were asked about drop out, defined as stopping treatment before the provider wanted. Overall, drop out was 31.7%: 26.3% in high-income countries, 45.1% in upper-middle-income countries, and 37.6% in low/lower-middle-income countries. Drop out from psychiatrists was 21.3% overall and similar across country income groups (high 20.3%, upper-middle 23.6%, low/lower-middle 23.8%) but the pattern of drop out across other sectors differed by country income group. Drop out was more likely early in treatment, particularly after the second visit. Drop out needs to be reduced to ensure effective treatment.

  15. Graphene quantum dots as a highly efficient solution-processed charge trapping medium for organic nano-floating gate memory.

    Science.gov (United States)

    Ji, Yongsung; Kim, Juhan; Cha, An-Na; Lee, Sang-A; Lee, Myung Woo; Suh, Jung Sang; Bae, Sukang; Moon, Byung Joon; Lee, Sang Hyun; Lee, Dong Su; Wang, Gunuk; Kim, Tae-Wook

    2016-04-08

    A highly efficient solution-processible charge trapping medium is a prerequisite to developing high-performance organic nano-floating gate memory (NFGM) devices. Although several candidates for the charge trapping layer have been proposed for organic memory, a method for significantly increasing the density of stored charges in nanoscale layers remains a considerable challenge. Here, solution-processible graphene quantum dots (GQDs) were prepared by a modified thermal plasma jet method; the GQDs were mostly composed of carbon without any serious oxidation, which was confirmed by x-ray photoelectron spectroscopy. These GQDs have multiple energy levels because of their size distribution, and they can be effectively utilized as charge trapping media for organic NFGM applications. The NFGM device exhibited excellent reversible switching characteristics, with an on/off current ratio greater than 10(6), a stable retention time of 10(4) s and reliable cycling endurance over 100 cycles. In particular, we estimated that the GQDs layer trapped ∼7.2 × 10(12) cm(-2) charges per unit area, which is a much higher density than those of other solution-processible nanomaterials, suggesting that the GQDs layer holds promise as a highly efficient nanoscale charge trapping material.

  16. Influence of meso-substituted tetraphenylporphyrin derivatives structure on their supramolecular organization in floating layers and Langmuir-Blodgett films.

    Science.gov (United States)

    Kazak, Alexandr V; Usol'tseva, Nadezhda V; Yudin, Sergey G; Sotsky, Valentin V; Semeikin, Alexandr S

    2012-12-11

    To study the influence of structure peculiarities of porphyrin derivatives on their supramolecular organization in thin films, 15 new meso-substituted tetraphenylporphyrin derivatives and their metal complexes with substituents (-OC(4)H(9) or -OC(16)H(33)) in para or ortho positions were studied. The films of the studied compounds were obtained by the Langmuir-Schaefer method. The behavior of porphyrin derivatives at the water-air interface was analyzed, and the conformity of the influence of molecular structure on supramolecular organization in floating layers and Langmuir-Blodgett films was defined. The absorption of these films over a wide spectral range was analyzed. The supramolecular organization of meso-substituted tetraphenylporphyrin derivatives was modeled and specified with the help of X-ray diffraction analysis. It was determined that the formation of monomolecular layers is typical for the compounds with short lateral substituents or without substituents. Tetraphenylporphyrins with extensive substituents can form a monolayer only when zinc is included in the molecular structure.

  17. Removal of floating organic in Hanford Waste Tank 241-C-103 restart plan

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, T.R.; Hanson, C.

    1994-10-03

    The decision whether or not to remove the organic layer from Waste Tank 241-C-103 was deferred until May, 1995. The following restart plan was prepared for removal of the organic if the decision is to remove the organic from the waste tank 241-C-103.

  18. FLOAT Project

    DEFF Research Database (Denmark)

    Sørensen, Eigil V.; Aarup, Bendt

    The objective of the FLOAT project is to study the reliability of high-performance fibre-reinforced concrete, also known as Compact Reinforced Composite (CRC), for the floats of wave energy converters. In order to reach a commercial breakthrough, wave energy converters need to achieve a lower price...... of energy produced, comparable to prices currently obtained from offshore wind power, and this can be done by the use of more suitable materials. The flotation device is a key part of converters, as it accounts for a considerable share of initial investment, up to 27% depending on the converter. CRC floats...

  19. Statistical Analysis of Consequences Caused by the Collisions of Soaring Drops of Organic Coal-Water Fuel

    Directory of Open Access Journals (Sweden)

    Valiullin Timur R.

    2017-01-01

    Full Text Available The paper examines the processes of collision of the soaring organic coal – water fuel (OCWF drops in the specialized combustion chamber in case of direct injection of suspension with the subsequent crushing, decay and coagulation. High speed video registration is used. The fuel composition is prepared with the use of a coal conversion waste (filter-cake “G”, turbine oil waste, water and a plasticizer. The statistical analysis of consequences of impingement of OCWF drops at their movement in an oxidizer flotation (temperature is about 800-840 K with their following deformation is carried out. The conditions when the processes of coagulation, disintegration or crushing of drops are dominated are established.

  20. Determination of parabens in beverage samples by dispersive liquid-liquid microextraction based on solidification of floating organic droplet.

    Science.gov (United States)

    Hou, Fang; Deng, Xiaoying; Jiang, Xinyu; Yu, Jingang

    2014-01-01

    A simple and efficient method for dispersive liquid-liquid microextraction of methylparaben, ethylparaben, propylparaben and butylparaben in real beverage samples was developed. It is making use of solidified floating organic droplets of 1-dodecanol which has low density and a proper melting point. Parameters influencing the extraction efficiency, such as the type of extraction and dispersive solvent, the volume of extraction and dispersive solvent, salt effect, pH, extraction time, were optimized and resulted in enrichment factors (EFs) of 84 for methylparaben, 103 for ethylparaben, 115 for propylparaben and 126 for butylparaben. The limits of detection for parabens were 1.52, 1.06, 0.32 and 0.17 ng/mL, respectively. Excellent linearity with coefficients of correlation from 0.9970 to 0.9997 was observed in the concentration range of 5-1,000 ng/mL. The repeatability of the proposed method expressed as relative standard deviations (RSDs) ranged from 2.54 to 3.89% (n = 5). The relative recoveries for parabens in beverage samples were good and in the ranges of 89.8-109.9, 90.2-107.3, 90.9-101.7 and 92.3-118.1%, respectively. Thus, the proposed method has excellent potential for the determination of parabens in beverage samples. © The Author [2013]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Production of Chromophoric Dissolved Organic Matter from Mangrove Leaf Litter and Floating Sargassum Colonies

    Science.gov (United States)

    Chromophoric dissolved organic matter (CDOM) strongly absorbs solar radiation in the blue-green and serves as the primary attenuator of water column ultraviolet radiation (UV-R). CDOM interferes with remote sensing of ocean chlorophyll and can control UV-R-induced damage to light...

  2. Drag on Sessile Drops

    Science.gov (United States)

    Milne, Andrew J. B.; Fleck, Brian; Nobes, David; Sen, Debjyoti; Amirfazli, Alidad; University of Alberta Mechanical Engineering Collaboration

    2013-11-01

    We present the first ever direct measurements of the coefficient of drag on sessile drops at Reynolds numbers from the creeping flow regime up to the point of incipient motion, made using a newly developed floating element differential drag sensor. Surfaces of different wettabilities (PMMA, Teflon, and a superhydrophobic surface (SHS)), wet by water, hexadecane, and various silicone oils, are used to study the effects of drop shape, and fluid properties on drag. The relation between drag coefficient and Reynolds number (scaled by drop height) varies slightly with liquid-solid system and drop volume with results suggesting the drop experiences increased drag compared to similar shaped solid bodies due to drop oscillation influencing the otherwise laminar flow. Drops adopting more spherical shapes are seen to experience the greatest force at any given airspeed. This indicates that the relative exposed areas of drops is an important consideration in terms of force, with implications for the shedding of drops in applications such as airfoil icing and fuel cell flooding. The measurement technique used in this work can be adapted to measure drag force on other deformable, lightly adhered objects such as dust, sand, snow, vesicles, foams, and biofilms. The authours acknowledge NSERC, Alberta Innovates Technology Futures, and the Killam Trusts.

  3. Floating Life

    Institute of Scientific and Technical Information of China (English)

    YIN PUMIN

    2010-01-01

    @@ One in six people in China have left their hometown in search of a better life and the number continues to grow,creating a challenge for host cities,according to a government report.The floating population,or people who live and work outside their permanent home,reached 211 million last year and the number could reach 350 million by 2050 if govemment policies remain unchanged,said the Report on the Development of China's Floating Population issued on June 26 by the National Population and Family Planning Commission (NPFPC).

  4. Drop floating on a granular raft

    Science.gov (United States)

    Jambon-Puillet, Etienne; Protière, Suzie

    2016-09-01

    This paper is associated with a poster winner of a 2015 APS/DFD Milton van Dyke Award for work presented at the DFD Gallery of Fluid Motion. The original poster is available from the Gallery of Fluid Motion, http://dx.doi.org/10.1103/APS.DFD.2015.GFM.P0008

  5. Voltage Drop Compensation Method for Active Matrix Organic Light Emitting Diode Displays

    Science.gov (United States)

    Choi, Sang-moo; Ryu, Do-hyung; Kim, Keum-nam; Choi, Jae-beom; Kim, Byung-hee; Berkeley, Brian

    2011-03-01

    In this paper, the conventional voltage drop compensation methods are reviewed and the novel design and driving scheme, the advanced power de-coupled (aPDC) driving method, is proposed to effectively compensate the voltage IR drop of active matrix light emitting diode (AMOLED) displays. The advanced PDC driving scheme can be applied to general AMOLED pixel circuits that have been developed with only minor modification or without requiring modification in pixel circuit. A 14-in. AMOLED panel with the aPDC driving scheme was fabricated. Long range uniformity (LRU) of the 14-in. AMOLED panel was improved from 43% without the aPDC driving scheme, to over 87% at the same brightness by using the scheme and the layout complexity of the panel with new design scheme is less than that of the panel with the conventional design scheme.

  6. Impact of organic nutrient load on biomass accumulation, feed channel pressure drop increase and permeate flux decline in membrane systems

    KAUST Repository

    Bucs, Szilard

    2014-12-01

    The influence of organic nutrient load on biomass accumulation (biofouling) and pressure drop development in membrane filtration systems was investigated. Nutrient load is the product of nutrient concentration and linear flow velocity. Biofouling - excessive growth of microbial biomass in membrane systems - hampers membrane performance. The influence of biodegradable organic nutrient load on biofouling was investigated at varying (i) crossflow velocity, (ii) nutrient concentration, (iii) shear, and (iv) feed spacer thickness. Experimental studies were performed with membrane fouling simulators (MFSs) containing a reverse osmosis (RO) membrane and a 31 mil thick feed spacer, commonly applied in practice in RO and nanofiltration (NF) spiral-wound membrane modules. Numerical modeling studies were done with identical feed spacer geometry differing in thickness (28, 31 and 34 mil). Additionally, experiments were done applying a forward osmosis (FO) membrane with varying spacer thickness (28, 31 and 34 mil), addressing the permeate flux decline and biofilm development. Assessed were the development of feed channel pressure drop (MFS studies), permeate flux (FO studies) and accumulated biomass amount measured by adenosine triphosphate (ATP) and total organic carbon (TOC).Our studies showed that the organic nutrient load determined the accumulated amount of biomass. The same amount of accumulated biomass was found at constant nutrient load irrespective of linear flow velocity, shear, and/or feed spacer thickness. The impact of the same amount of accumulated biomass on feed channel pressure drop and permeate flux was influenced by membrane process design and operational conditions. Reducing the nutrient load by pretreatment slowed-down the biofilm formation. The impact of accumulated biomass on membrane performance was reduced by applying a lower crossflow velocity and/or a thicker and/or a modified geometry feed spacer. The results indicate that cleanings can be delayed

  7. Impact of organic nutrient load on biomass accumulation, feed channel pressure drop increase and permeate flux decline in membrane systems.

    Science.gov (United States)

    Bucs, Sz S; Valladares Linares, R; van Loosdrecht, M C M; Kruithof, J C; Vrouwenvelder, J S

    2014-12-15

    The influence of organic nutrient load on biomass accumulation (biofouling) and pressure drop development in membrane filtration systems was investigated. Nutrient load is the product of nutrient concentration and linear flow velocity. Biofouling - excessive growth of microbial biomass in membrane systems - hampers membrane performance. The influence of biodegradable organic nutrient load on biofouling was investigated at varying (i) crossflow velocity, (ii) nutrient concentration, (iii) shear, and (iv) feed spacer thickness. Experimental studies were performed with membrane fouling simulators (MFSs) containing a reverse osmosis (RO) membrane and a 31 mil thick feed spacer, commonly applied in practice in RO and nanofiltration (NF) spiral-wound membrane modules. Numerical modeling studies were done with identical feed spacer geometry differing in thickness (28, 31 and 34 mil). Additionally, experiments were done applying a forward osmosis (FO) membrane with varying spacer thickness (28, 31 and 34 mil), addressing the permeate flux decline and biofilm development. Assessed were the development of feed channel pressure drop (MFS studies), permeate flux (FO studies) and accumulated biomass amount measured by adenosine triphosphate (ATP) and total organic carbon (TOC). Our studies showed that the organic nutrient load determined the accumulated amount of biomass. The same amount of accumulated biomass was found at constant nutrient load irrespective of linear flow velocity, shear, and/or feed spacer thickness. The impact of the same amount of accumulated biomass on feed channel pressure drop and permeate flux was influenced by membrane process design and operational conditions. Reducing the nutrient load by pretreatment slowed-down the biofilm formation. The impact of accumulated biomass on membrane performance was reduced by applying a lower crossflow velocity and/or a thicker and/or a modified geometry feed spacer. The results indicate that cleanings can be delayed

  8. Research Progress of Floating Gate Type Organic Nonvolatile Memories%浮栅型有机非易失性存储器的研究

    Institute of Scientific and Technical Information of China (English)

    陆旭兵; 邵亚云; 刘俊明

    2013-01-01

    有机柔性电子器件具有低制造成本、大面积、可柔性折叠等优点,是近年来国内外学术界和工业界的研究热点。有机非易失存储器是一种重要的有机柔性电子器件。介绍了浮栅型有机非易失性存储器件的工作原理;综述了国内外学术界对浮栅型有机非易失性存储器的研究进展、存在的问题及解决对策。%The organic electron devices have been widely investigated in both academia and industry due to their advantages of low cost , large area , and flexibility etc .The organic nonvolatile memory is one of the important or-ganic devices .In this paper , we will first explain the working principles of the floating gate type organic nonvolatile memory.Then we will introduce some recent progresses of the floating gate organic nonvolatile memories .Finally the existing challenges and possible solutions for their low voltage , high reliability operations were discussed .

  9. Floating shoulder

    OpenAIRE

    B. de Pablo Márquez; P. Castillón Bernal; I. Fuentes López

    2014-01-01

    La fractura concomitante de clavícula y escápula es una entidad poco frecuente que puede ser una de las causas de afectación del complejo suspensorio del hombro también denominado hombro flotante (floating shoulder). Se relaciona frecuentemente con traumatismos de alta energía. Presentamos un caso de esta patología en un paciente varón de 28 años que consultó por caída en bicicleta con contusión sobre hombro izquierdo. Se describen las diferentes opciones terapéuticas planteadas, las imágenes...

  10. Dispersive liquid-liquid microextraction based on solidification of floating organic droplets followed by high performance liquid chromatography for the determination of duloxetine in human plasma.

    Science.gov (United States)

    Suh, Joon Hyuk; Lee, Yun Young; Lee, Hee Joo; Kang, Myunghee; Hur, Yeoun; Lee, Sun Neo; Yang, Dong-Hyug; Han, Sang Beom

    2013-03-05

    A novel dispersive liquid-liquid microextraction method based on solidification of floating organic droplets (DLLME-SFO) technique was developed for the determination of duloxetine in human plasma samples by high performance liquid chromatography with fluorescence detection (HPLC-FLD). During the extraction procedure, plasma protein was precipitated by using a mixture of zinc sulfate solution and acetonitrile. After the protein precipitation step, duloxetine in an alkaline sample solution was quickly extracted by DLLME-SFO with 50 μL of 1-undecanol (extractant). Disperser was unnecessary because the small amount of remaining acetonitrile, which acts as a protein precipitating reagent, was also employed as a disperser; therefore, organic solvent consumption was reduced as much as possible. The emulsion was centrifuged and then fine droplets were floated to the top of the sample solution. The floated droplets were solidified in an ice bath and easily transferred. Various DLLME-SFO parameters such as extractant type, extractant amount, ionic strength, pH and extraction time were optimized. The chromatographic separation of duloxetine was carried out using ethanol as mobile phase. Validation of the method was performed with respect to linearity, intra- and inter-day accuracy and precision, limit of quantification (LOQ), and recovery. Calibration curves for duloxetine showed good linearity with correlation coefficients (r²) higher than 0.99. The method showed good precision and accuracy, with intra- and inter-assay coefficients of variation less than 15% (LOQ: less than 20%) at all concentrations. The recovery was carried out following the standard addition procedure with yields ranging from 59.6 to 65.5%. A newly developed environmentally friendly method was successfully applied to the pharmacokinetic study of duloxetine in human plasma and was shown to be an alternative green approach compared with the conventional solid-phase microextraction (SPME) and dispersive

  11. Floating Silicon Method

    Energy Technology Data Exchange (ETDEWEB)

    Kellerman, Peter

    2013-12-21

    The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

  12. Floating shoulder

    Directory of Open Access Journals (Sweden)

    B. de Pablo Márquez

    2014-09-01

    Full Text Available La fractura concomitante de clavícula y escápula es una entidad poco frecuente que puede ser una de las causas de afectación del complejo suspensorio del hombro también denominado hombro flotante (floating shoulder. Se relaciona frecuentemente con traumatismos de alta energía. Presentamos un caso de esta patología en un paciente varón de 28 años que consultó por caída en bicicleta con contusión sobre hombro izquierdo. Se describen las diferentes opciones terapéuticas planteadas, las imágenes radiológicas y una revisión de la literatura.

  13. Can Heavier Liquid Float on Top of a Lighter One?

    Institute of Scientific and Technical Information of China (English)

    A. H. Ayyad; F. Takrori

    2011-01-01

    We report on a first observation of a floating spherical Hg (density 13g/cm3) drop on top of a glycerin (density 1.26g/cm3) drop, the latter is hemispherical and about four times larger in volume. This observation is clearly against nature's gravity law and has never been reported before. Here we present spectacular high resolution photos that clearly demonstrate this remarkable floating phenomenon. Using milli-Q water, the Hg drop would stay down adhered at the triple line. Instead, the coincidental use of tap water displays the same phenomenon. Increasing the volume of the supporting liquid to a certain value causes the Hg drop to sink. A 5-M NaCl aqueous solution is found enough to show the same floating phenomenon. This floating mercury as a phenomenon is puzzling. On this length scale it seems that surface tension and curvature dominate over gravity.

  14. Combined processing and mutual interpretation of radiometry and fluorometry from autonomous profiling Bio-Argo floats: 2. Colored dissolved organic matter absorption retrieval

    Science.gov (United States)

    Xing, Xiaogang; Morel, André; Claustre, Hervé; D'Ortenzio, Fabrizio; Poteau, Antoine

    2012-04-01

    Eight autonomous profiling "Bio-Argo" floats were deployed offshore during about 2 years (2008-2010) in Pacific, Atlantic, and Mediterranean zones. They were equipped with miniaturized bio-optical sensors, namely a radiometer measuring within the upper layer the downward irradiance at 412, 490, and 555 nm, and two fluorometers for detection of chlorophyll-a (Chla) and colored dissolved organic matter (CDOM; profiles from 400 m to surface). A first study dealt with the interpretation of the Chla fluorescence signal in terms of concentration, using for this purpose the diffuse attenuation coefficient for irradiance at 490 nm, Kd(490), taken as a proxy for the Chla absorption. The present study examines the possibility of similarly using the Kd(412) values combined with retrieved Chla profiles to convert the CDOM fluorometric qualitative information into a CDOM absorption coefficient (ay). The rationale is to take advantage of the fact that Kd is more sensitive to CDOM presence at 412 nm than at 490 nm. A validation of this method is tested through its application to field data, collected from a ship over a wide range of trophic conditions (Biogeochemistry and Optics South Pacific Experiment (BIOSOPE) cruise); these data include both in situ fluorescence profiles and CDOM absorption as measured on discrete samples. In addition, near-surface ay values retrieved from the floats agree with those derivable from ocean color imagery (Moderate Resolution Imaging Spectroradiometer (MODIS-A)). The low sensitivity of commercially available CDOM fluorometers presently raises difficulties when applying this technique to open ocean waters. It was nevertheless possible to derive from the floats records meaningful time series of CDOM vertical distribution.

  15. After the bomb drops: a new look at radiation-induced multiple organ dysfunction syndrome (MODS).

    Science.gov (United States)

    Williams, Jacqueline P; McBride, William H

    2011-08-01

    There is increasing concern that, since the Cold War era, there has been little progress regarding the availability of medical countermeasures in the event of either a radiological or nuclear incident. Fortunately, since much is known about the acute consequences that are likely to be experienced by an exposed population, the probability of survival from the immediate hematological crises after total body irradiation (TBI) has improved in recent years. Therefore focus has begun to shift towards later down-stream effects, seen in such organs as the gastrointestinal tract (GI), skin, and lung. However, the mechanisms underlying therapy-related normal tissue late effects, resulting from localised irradiation, have remained somewhat elusive and even less is known about the development of the delayed syndrome seen in the context of whole body exposures, when it is likely that systemic perturbations may alter tissue microenvironments and homeostasis. The sequence of organ failures observed after near-lethal TBI doses are similar in many ways to that of multiple organ dysfunction syndrome (MODS), leading to multiple organ failure (MOF). In this review, we compare the mechanistic pathways that underlie both MODS and delayed normal tissue effects since these may impact on strategies to identify radiation countermeasures.

  16. Air-assisted liquid–liquid microextraction by solidifying the floating organic droplets for the rapid determination of seven fungicide residues in juice samples

    Energy Technology Data Exchange (ETDEWEB)

    You, Xiangwei [Tobacco Research Institute, Chinese Academy of Agricultural Sciences, Qingdao 266101 (China); College of Science, China Agricultural University, Beijing 100193 (China); Xing, Zhuokan [College of Science, China Agricultural University, Beijing 100193 (China); Liu, Fengmao, E-mail: liufengmao@cau.edu.cn [College of Science, China Agricultural University, Beijing 100193 (China); Zhang, Xu [College of Science, China Agricultural University, Beijing 100193 (China)

    2015-05-22

    Highlights: • A novel AALLME-SFO method was firstly reported for pesticide residue analysis. • Solvent with low density and proper melting point was used as extraction solvent. • The formation of “cloudy solvent” with a syringe only. • The new method avoided the use of organic dispersive solvent. - Abstract: A novel air assisted liquid–liquid microextraction using the solidification of a floating organic droplet method (AALLME-SFO) was developed for the rapid and simple determination of seven fungicide residues in juice samples, using the gas chromatography with electron capture detector (GC-ECD). This method combines the advantages of AALLME and dispersive liquid–liquid microextraction based on the solidification of floating organic droplets (DLLME-SFO) for the first time. In this method, a low-density solvent with a melting point near room temperature was used as the extraction solvent, and the emulsion was rapidly formed by pulling in and pushing out the mixture of aqueous sample solution and extraction solvent for ten times repeatedly using a 10-mL glass syringe. After centrifugation, the extractant droplet could be easily collected from the top of the aqueous samples by solidifying it at a temperature lower than the melting point. Under the optimized conditions, good linearities with the correlation coefficients (γ) higher than 0.9959 were obtained and the limits of detection (LOD) varied between 0.02 and 0.25 μg L{sup −1}. The proposed method was applied to determine the target fungicides in juice samples and acceptable recoveries ranged from 72.6% to 114.0% with the relative standard deviations (RSDs) of 2.3–13.0% were achieved. Compared with the conventional DLLME method, the newly proposed method will neither require a highly toxic chlorinated solvent for extraction nor an organic dispersive solvent in the application process; hence, it is more environmentally friendly.

  17. Ultrasound-air-assisted demulsified liquid-liquid microextraction by solidification of a floating organic droplet for determination of three antifungal drugs in water and biological samples.

    Science.gov (United States)

    Ezoddin, Maryam; Shojaie, Mehran; Abdi, Khosrou; Karimi, Mohammad Ali

    2017-03-01

    A novel ultrasound-air-assisted demulsified liquid-liquid microextraction by solidification of a floating organic droplet (UAAD-LLM-SFO) followed by HPLC-UV detection was developed for the analysis of three antifungal drugs in water and biological samples. In this method, 1-dodecanol was used as the extraction solvent. The emulsion was rapidly formed by pulling in and pushing out the mixture of sample solution and extraction solvent for 5 times repeatedly using a 10-mL glass syringe while sonication was performed. Therefore, an organic dispersive solvent required in common microextraction methods was not used in the proposed method. After dispersing, an aliquot of acetonitrile was introduced as a demulsifier solvent into the sample solution to separate two phases. Therefore, some additional steps, such as the centrifugation, ultrasonication, or agitation of the sample solution, are not needed. Parameters influencing the extraction recovery were investigated. The proposed method showed a good linearity for the three antifungal drugs studied with the correlation coefficients (R (2) > 0.9995). The limits of detection (LODs) and the limits of the quantification (LOQs) were between 0.01-0.03 μg L(-1) and 0.03-0.08 μg L(-1), respectively. The preconcentration factors (PFs) were in the range of 107-116, respectively. The precisions, as the relative standard deviations (RSDs) (n = 5), for inter-day and intra-day analysis were in the range of 2.1-4.5% and 6.5-8.5%, respectively. This method was successfully applied to determine the three antifungal drugs in tap water and biological samples. The recoveries of antifungal drugs in these samples were 92.4-98.5%. Graphical abstract Ultrasound-air-assisted demulsified liquid-liquid microextraction by solidification of a floating organic droplet for the analysis of three antifungal drugs prior HPLC-UV.

  18. Secondary Organic Aerosol Produced from Aqueous Reactions of Phenols in Fog Drops and Deliquesced Particles

    Science.gov (United States)

    Smith, J.; Anastasio, C.

    2014-12-01

    The formation and evolution of secondary organic aerosol (SOA) in atmospheric condensed phases (i.e., aqueous SOA) can proceed rapidly, but relatively little is known of the important aqueous SOA precursors or their reaction pathways. In our work we are studying the aqueous SOA formed from reactions of phenols (phenol, guaiacol, and syringol), benzene-diols (catechol, resorcinol, and hydroquinone), and phenolic carbonyls (e.g., vanillin and syringaldehyde). These species are potentially important aqueous SOA precursors because they are released in large quantities from biomass burning, have high Henry's Law constants (KH = 103 -109 M-1 atm-1) and are rapidly oxidized. To evaluate the importance of aqueous reactions of phenols as a source of SOA, we first quantified the kinetics and SOA mass yields for 11 phenols reacting via direct photodegradation, hydroxyl radical (•OH), and with an excited organic triplet state (3C*). In the second step, which is the focus of this work, we use these laboratory results in a simple model of fog chemistry using conditions during a previously reported heavy biomass burning event in Bakersfield, CA. Our calculations indicate that under aqueous aerosol conditions (i.e., a liquid water content of 100 μg m-3) the rate of aqueous SOA production (RSOA(aq)) from phenols is similar to the rate in the gas phase. In contrast, under fog/cloud conditions the aqueous RSOA from phenols is 10 times higher than the rate in the gas phase. In both of these cases aqueous RSOA is dominated by the oxidation of phenols by 3C*, followed by direct photodegradation of phenolic carbonyls, and then •OH oxidation. Our results suggest that aqueous oxidation of phenols is a significant source of SOA during fog events and also during times when deliquesced aerosols are present.

  19. Dispersive liquid-phase microextraction with solidification of floating organic droplet coupled with high-performance liquid chromatography for the determination of Sudan dyes in foodstuffs and water samples.

    Science.gov (United States)

    Chen, Bo; Huang, Yuming

    2014-06-25

    Dispersive liquid-phase microextraction with solidification of floating organic drop (SFO-DLPME) is one of the most interesting sample preparation techniques developed in recent years. In this paper, a new, rapid, and efficient SFO-DLPME coupled with high-performance liquid chromatography (HPLC) was established for the extraction and sensitive detection of banned Sudan dyes, namely, Sudan I, Sudan II, Sudan III, and Sudan IV, in foodstuff and water samples. Various factors, such as the type and volume of extractants and dispersants, pH and volume of sample solution, extraction time and temperature, ion strength, and humic acid concentration, were investigated and optimized to achieve optimal extraction of Sudan dyes in one single step. After optimization of extraction conditions using 1-dodecanol as an extractant and ethanol as a dispersant, the developed procedure was applied for extraction of the target Sudan dyes from 2 g of food samples and 10 mL of the spiked water samples. Under the optimized conditions, all Sudan dyes could be easily extracted by the proposed SFO-DLPME method. Limits of detection of the four Sudan dyes obtained were 0.10-0.20 ng g(-1) and 0.03 μg L(-1) when 2 g of foodstuff samples and 10 mL of water samples were adopted, respectively. The inter- and intraday reproducibilities were below 4.8% for analysis of Sudan dyes in foodstuffs. The method was satisfactorily used for the detection of Sudan dyes, and the recoveries of the target for the spiked foodstuff and water samples ranged from 92.6 to 106.6% and from 91.1 to 108.6%, respectively. These results indicated that the proposed method is simple, rapid, sensitive, and suitable for the pre-concentration and detection of the target dyes in foodstuff samples.

  20. "Floating shoulder" injuries.

    Science.gov (United States)

    Heng, Kenneth

    2016-12-01

    "Floating shoulder" is a rare injury complex resulting from high-energy blunt force trauma to the shoulder, resulting in scapulothoracic dissociation. It is commonly associated with catastrophic neurovascular injury. Two cases of motorcyclists with floating shoulder injuries are described.

  1. Life-History Traits of the Model Organism Pristionchus pacificus Recorded Using the Hanging Drop Method: Comparison with Caenorhabditis elegans.

    Science.gov (United States)

    Gilarte, Patricia; Kreuzinger-Janik, Bianca; Majdi, Nabil; Traunspurger, Walter

    2015-01-01

    The nematode Pristionchus pacificus is of growing interest as a model organism in evolutionary biology. However, despite multiple studies of its genetics, developmental cues, and ecology, the basic life-history traits (LHTs) of P. pacificus remain unknown. In this study, we used the hanging drop method to follow P. pacificus at the individual level and thereby quantify its LHTs. This approach allowed direct comparisons with the LHTs of Caenorhabditis elegans recently determined using this method. When provided with 5×10(9) Escherichia coli cells ml(-1) at 20°C, the intrinsic rate of natural increase of P. pacificus was 1.125 (individually, per day); mean net production was 115 juveniles produced during the life-time of each individual, and each nematode laid an average of 270 eggs (both fertile and unfertile). The mean age of P. pacificus individuals at first reproduction was 65 h, and the average life span was 22 days. The life cycle of P. pacificus is therefore slightly longer than that of C. elegans, with a longer average life span and hatching time and the production of fewer progeny.

  2. Life-History Traits of the Model Organism Pristionchus pacificus Recorded Using the Hanging Drop Method: Comparison with Caenorhabditis elegans.

    Directory of Open Access Journals (Sweden)

    Patricia Gilarte

    Full Text Available The nematode Pristionchus pacificus is of growing interest as a model organism in evolutionary biology. However, despite multiple studies of its genetics, developmental cues, and ecology, the basic life-history traits (LHTs of P. pacificus remain unknown. In this study, we used the hanging drop method to follow P. pacificus at the individual level and thereby quantify its LHTs. This approach allowed direct comparisons with the LHTs of Caenorhabditis elegans recently determined using this method. When provided with 5×10(9 Escherichia coli cells ml(-1 at 20°C, the intrinsic rate of natural increase of P. pacificus was 1.125 (individually, per day; mean net production was 115 juveniles produced during the life-time of each individual, and each nematode laid an average of 270 eggs (both fertile and unfertile. The mean age of P. pacificus individuals at first reproduction was 65 h, and the average life span was 22 days. The life cycle of P. pacificus is therefore slightly longer than that of C. elegans, with a longer average life span and hatching time and the production of fewer progeny.

  3. Natural attenuation of contaminated marine sediments from an old floating dock - Part I: Spatial and temporal changes of organic and inorganic pollutants.

    Science.gov (United States)

    Wang, Ya-Fen; Tam, Nora Fung-Yee

    2012-03-15

    Temporal and spatial changes of mixed pollutants, including eight heavy metals, 16 US EPA priority polycyclic aromatic hydrocarbons (PAHs) and tributyltin (TBT) in surface marine sediments were examined for a one-year period after the removal of an old floating dock in Hong Kong SAR, South China. The sediments from the impacted stations close to the dock were highly polluted with zinc (Zn) and copper (Cu), and were moderately polluted with TBT and total PAHs, based on their effects range-low (ERL) guideline values, while those collected in the reference stations away from the dock were lower than the ERL. Strong, positive correlations were found between the organic pollutants and heavy metals only in the impacted stations, suggesting that the old floating dock was a significant source of mixed pollutants. There was no significant decline in the levels of total PAHs, TBT and heavy metals and "hot spots" of contamination were still detected a year after the removal of the dock. However, the profiles of 16 PAHs in the impacted stations changed 6 months after the removal of the dock, with decreases of certain low-molecular-weight PAHs, especially fluorene, as a sign of biodegradation in situ. Further, principal component analysis (PCA) based on an integrated dataset of the pollutants together with general sediment properties showed that the temporal changes of the biodegradable low-molecular-weight PAHs were highly associated with the pH value and total Kjeldahl nitrogen, while heavy metals were independent of time and other sediment properties during natural attenuation in the dock area. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Soft drop

    Energy Technology Data Exchange (ETDEWEB)

    Larkoski, Andrew J. [Center for Theoretical Physics, Massachusetts Institute of Technology,Cambridge, MA 02139 (United States); Marzani, Simone [Institute for Particle Physics Phenomenology, Durham University,South Road, Durham DH1 3LE (United Kingdom); Soyez, Gregory [IPhT, CEA Saclay, CNRS URA 2306,F-91191 Gif-sur-Yvette (France); Thaler, Jesse [Center for Theoretical Physics, Massachusetts Institute of Technology,Cambridge, MA 02139 (United States)

    2014-05-29

    We introduce a new jet substructure technique called “soft drop declustering”, which recursively removes soft wide-angle radiation from a jet. The soft drop algorithm depends on two parameters — a soft threshold z{sub cut} and an angular exponent β — with the β=0 limit corresponding roughly to the (modified) mass drop procedure. To gain an analytic understanding of soft drop and highlight the β dependence, we perform resummed calculations for three observables on soft-dropped jets: the energy correlation functions, the groomed jet radius, and the energy loss due to soft drop. The β=0 limit of the energy loss is particularly interesting, since it is not only “Sudakov safe” but also largely insensitive to the value of the strong coupling constant. While our calculations are strictly accurate only to modified leading-logarithmic order, we also include a discussion of higher-order effects such as multiple emissions and (the absence of) non-global logarithms. We compare our analytic results to parton shower simulations and find good agreement, and we also estimate the impact of non-perturbative effects such as hadronization and the underlying event. Finally, we demonstrate how soft drop can be used for tagging boosted W bosons, and we speculate on the potential advantages of using soft drop for pileup mitigation.

  5. Unstable Leidenfrost Drops on Roughened Surfaces

    CERN Document Server

    Boreyko, Jonathan B

    2010-01-01

    Drops placed on a surface with a temperature above the Leidenfrost point float atop an evaporative vapor layer. In this fluid dynamics video, it is shown that for roughened surfaces the Leidenfrost point depends on the drop size, which runs contrary to previous claims of size independence. The thickness of the vapor layer is known to increase with drop radius, suggesting that the surface roughness will not be able to penetrate the vapor layer for drops above a critical size. This size dependence was experimentally verified: at a given roughness and temperature, drops beneath a critical size exhibited transition boiling while drops above the critical size were in the Leidenfrost regime. These Leidenfrost drops were unstable; upon evaporation down to the critical size the vapor film suddenly collapsed.

  6. Soft Drop

    CERN Document Server

    Larkoski, Andrew J; Soyez, Gregory; Thaler, Jesse

    2014-01-01

    We introduce a new jet substructure technique called "soft drop declustering", which recursively removes soft wide-angle radiation from a jet. The soft drop algorithm depends on two parameters--a soft threshold $z_\\text{cut}$ and an angular exponent $\\beta$--with the $\\beta = 0$ limit corresponding roughly to the (modified) mass drop procedure. To gain an analytic understanding of soft drop and highlight the $\\beta$ dependence, we perform resummed calculations for three observables on soft-dropped jets: the energy correlation functions, the groomed jet radius, and the energy loss due to soft drop. The $\\beta = 0$ limit of the energy loss is particularly interesting, since it is not only "Sudakov safe" but also largely insensitive to the value of the strong coupling constant. While our calculations are strictly accurate only to modified leading-logarithmic order, we also include a discussion of higher-order effects such as multiple emissions and (the absence of) non-global logarithms. We compare our analytic r...

  7. An experimental analysis of flow boiling and pressure drop in a brazed plate heat exchanger for organic Rankine cycle power systems

    DEFF Research Database (Denmark)

    Desideri, Adriano; Zhang, Ji; Kærn, Martin Ryhl

    2017-01-01

    Organic Rankine cycle power systems for low quality waste heat recovery applications can play a major role in achieving targets of increasing industrial processes efficiency and thus reducing the emissions of greenhouse gases. Low capacity organic Rankine cycle systems are equipped with brazed...... and pressure drop during vaporization at typical temperatures for low quality waste heat recovery organic Rankine cycle systems are presented for the working fluids HFC-245fa and HFO-1233zd. The experiments were carried out at saturation temperatures of 100°C, 115°C and 130°C and inlet and outlet qualities...

  8. Dispersive liquid-liquid microextraction method based on solidification of floating organic droplet for the determination of triazine herbicides in water and sugarcane samples.

    Science.gov (United States)

    Sanagi, Mohd Marsin; Abbas, Hana Hassan; Ibrahim, Wan Aini Wan; Aboul-Enien, Hassan Y

    2012-07-15

    Dispersive liquid-liquid microextraction method based on solidification of floating organic droplet (DLLME-SFO) was developed for the analysis of triazines. As model compounds four selected triazine herbicides namely, simazine, atrazine, secbumeton and cyanazine were employed to estimate the extraction efficiency. The experimental conditions were comprehensively studied for the DLLME-SFO method. Under the use of 10 μL of 1-undecanol as extraction solvent, 100 μL of acetonitrile as disperser solvent and 5% (w/v) NaCl for 3 min the results demonstrated that the repeatability (RSD%) of the optimised DLLME-SFO method ranged from 0.03% to 5.1% and the linearity in the range of 0.01-100 ppb. Low limits of detection (0.037-0.008 ppb), and good enrichment factors (195-322) were obtained. The DLLME-SFO method applied in water and sugarcane samples showed excellent relative recoveries (95.7-116.9%) with RSDs <8.6% (n=3) for all samples.

  9. 40 CFR 63.1043 - Standards-Separator floating roof.

    Science.gov (United States)

    2010-07-01

    ...) National Emission Standards for Oil-Water Separators and Organic-Water Separators § 63.1043 Standards... controlling air emissions from an oil-water separator or organic-water separator using a floating roof. (b... floating roof shall be equipped with two continuous seals, one above the other, between the wall of...

  10. Benthic organism and other data from drop nets from the COMMANDO as part of the Outer Continental Shelf Environmental Assessment Program (OCSEAP) from 07 March 1979 to 18 March 1979 (NODC Accession 8100534)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic organism and other data were collected from drop nets from the COMMANDO by University of Alaska; Institute of Marine Science (UAK/IMS). Data were collected...

  11. Vertical vibration and shape oscillation of acoustically levitated water drops

    Energy Technology Data Exchange (ETDEWEB)

    Geng, D. L.; Xie, W. J.; Yan, N.; Wei, B., E-mail: bbwei@nwpu.edu.cn [Department of Applied Physics, Northwestern Polytechnical University, Xi' an 710072 (China)

    2014-09-08

    We present the vertical harmonic vibration of levitated water drops within ultrasound field. The restoring force to maintain such a vibration mode is provided by the resultant force of acoustic radiation force and drop gravity. Experiments reveal that the vibration frequency increases with the aspect ratio for drops with the same volume, which agrees with the theoretical prediction for those cases of nearly equiaxed drops. During the vertical vibration, the floating drops undergo the second order shape oscillation. The shape oscillation frequency is determined to be twice the vibration frequency.

  12. Simulated floating zone method

    OpenAIRE

    Ozawa, Ryo; Kato, Yasuyuki; Motome, Yukitoshi

    2016-01-01

    This paper provides the simulated floating zone (SFZ) method that is an efficient simulation technique to obtain thermal equilibrium states, especially useful when domain formation prevents the system from reaching a spatially-uniform stable state. In the SFZ method, the system is heated up locally, and the heated region is steadily shifted, similar to the floating zone method for growing a single crystal with less lattice defect and impurity in experiments. We demonstrate that the SFZ method...

  13. Sensitive determination of methadone in human serum and urine by dispersive liquid-liquid microextraction based on the solidification of a floating organic droplet followed by HPLC-UV.

    Science.gov (United States)

    Taheri, Salman; Jalali, Fahimeh; Fattahi, Nazir; Jalili, Ronak; Bahrami, Gholamreza

    2015-10-01

    Dispersive liquid-liquid microextraction based on solidification of floating organic droplet was developed for the extraction of methadone and determination by high-performance liquid chromatography with UV detection. In this method, no microsyringe or fiber is required to support the organic microdrop due to the usage of an organic solvent with a low density and appropriate melting point. Furthermore, the extractant droplet can be collected easily by solidifying it at low temperature. 1-Undecanol and methanol were chosen as extraction and disperser solvents, respectively. Parameters that influence extraction efficiency, i.e. volumes of extracting and dispersing solvents, pH, and salt effect, were optimized by using response surface methodology. Under optimal conditions, enrichment factor for methadone was 134 and 160 in serum and urine samples, respectively. The limit of detection was 3.34 ng/mmL in serum and 1.67 ng/mL in urine samples. Compared with the traditional dispersive liquid-liquid microextraction, the proposed method obtained lower limit of detection. Moreover, the solidification of floating organic solvent facilitated the phase transfer. And most importantly, it avoided using high-density and toxic solvents of traditional dispersive liquid-liquid microextraction method. The proposed method was successfully applied to the determination of methadone in serum and urine samples of an addicted individual under methadone therapy.

  14. 组合型生态浮床中有机物及氮的去除转化%Transformation and removal of organic matter and nitrogen by integrated ecological floating bed

    Institute of Scientific and Technical Information of China (English)

    王国芳; 汪祥静; 吴磊; 李先宁

    2012-01-01

    通过设置水生植物浮床A、植物介质浮床B及植物介质河蚌浮床(组合型生态浮床)C等3个不同层次配置的浮床,考察了同样的运行条件下,各浮床出水中不同形态的有机物及氮的质量浓度变化,分析了浮床中各配置对有机物及氮的去除转化规律,同时研究了三角帆蚌对人工介质微生物富集特性的影响.结果表明:人工介质对溶解性的有机物及氮起到了明显的去除作用,三角帆蚌通过滤食消化促进了有机颗粒物的可溶化和无机化,对氮形态的转化起到了重要作用,从而提高了组合型生态浮床对氮的去除效果;三角帆蚌的引入增强了单位人工介质上微生物的TTC-脱氢酶活性与硝化细菌密度,从另一角度阐明了三角帆蚌对有机物及氮去除转化促进的特性.%Three kinds of floating beds of aquatic plants floating bed A, aquatic plants with artificial medium floating bed B and integrated ecological floating bed C with aquatic plants, artificial medium and a-quatic animals were established. The concentrations of organic matter and nitrogen with different forms in the beds were investigated, and the contaminant removal characteristic by different units was also analyzed. The influence of Hyriopsis cumingii on the microorganism enrichment character of artificial medium was discussed. The results show that artificial medium has obvious efficiency for removing deliquescent organic matter and nitrogen. The Hyriopsis cumingii promotes the solubilization and mineralization of par-ticulate organic matters by filtration and digestion to realize nitrogen transformation with improved nitrogen removal rate. The Hyriopsis cumingii can increase TTC-dehydrogenase activity of microorganism on artificial medium and raise the nitrifying bacteria density, which illuminates that organic matters and nitrogen removal can be improved by Hyriopsis cumingii.

  15. Can Oil Float Completely Submerged in Water?

    CERN Document Server

    Nath, Saurabh; Chatterjee, Souvick

    2013-01-01

    Droplet formation in a system of two or more immiscible fluids is a celebrated topic of research in the fluid mechanics community. In this work, we propose an innovative phenomenon where oil when injected drop-wise into a pool of water moves towards the air-water interface where it floats in a fully submerged condition. The configuration, however, is not stable and a slight perturbation to the system causes the droplet to burst and float in partially submerged condition. The droplet contour is analyzed using edge detection. Temporal variation of a characteristic length of the droplet is analyzed using MATLAB image processing. The constraint of small Bond Number established the assumption of lubrication regime in the thin gap. A brief theoretical formulation also showed the temporal variation of the gap thickness

  16. Determination of fungicides in fruit juice by ultrasound-assisted dispersive liquid-liquid microextraction based on solidification of floating organic solvent droplets followed by high performance liquid chromatography.

    Science.gov (United States)

    Fan, Run-Zhen; Liu, Congyun; Jiang, Wenqing; Wang, Xiaonan; Liu, Fengmao

    2014-01-01

    Ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) based on solidification of the floating organic solvent droplets (SFO) combined with HPLC was used for determination of five fungicides in fruit juice samples. 1-Dodecanol, which has a low density and low toxicity, was used as the extraction solvent in UA-DLLME. The solidification of floating organic droplets facilitates the transfer of analytes from the aqueous phase to the organic phase. This method was easy, quick, inexpensive, precise, and linear over a wide range. Under the optimized conditions, the enrichment factors for a 5 mL fruit juice sample were 25 to 56, and the LODs for the five fungicides ranged from 5 to 50 microg/L. The average recoveries ranged from 71.8 to 118.2% with RSDs of 0.9 to 13.9%. Application of the DLLME-SFO technique allows successful separation and preconcentration of the fungicides at a low concentration level in fruit juice samples.

  17. Optical microring resonators constructed from organic dye nanofibers and their application to miniaturized channel drop/add filters.

    Science.gov (United States)

    Takazawa, Ken; Inoue, Jun-ichi; Mitsuishi, Kazutaka

    2013-07-10

    We fabricated micrometer-scale optical ring resonators by micromanipulation of thiacyanine (TC) dye nanofibers that propagate exciton polaritons (EPs) along the fiber axis. High mechanical flexibility of the nanofibers and a low bending loss property of EP propagation enabled the fabrication of microring resonators with an average radius (r(ave)) as small as 1.6 μm. The performances of the fabricated resonators (r(ave) = 1.6-8.9 μm) were investigated by spatially resolved microscopy techniques. The Q-factors and finesses were evaluated as Q ≈ 300-3500 and F ≈ 2-12. On the basis of the r(ave)-dependence of resonator performances, we revealed the origin of losses in the resonators. To demonstrate the applicability of the microring resonators to photonic devices, we fabricated a channel drop filter that comprises a ring resonator (r(ave) = 3.9 μm) and an I/O bus channel nanofiber. The device exhibited high extinction ratios (4-6 dB) for its micrometer-scale dimensions. Moreover, we successfully fabricated a channel add filter comprising a ring resonator (r(ave) = 4.3 μm) and two I/O bus channel nanofibers. Our results demonstrated a remarkable potential for the application of TC nanofibers to miniaturized photonic circuit devices.

  18. 76 FR 52638 - Proposed Information Collection; Comment Request; Shipboard Observation Form for Floating Marine...

    Science.gov (United States)

    2011-08-23

    ... organizations (respondents) as well as numerous experts on marine debris observations at sea. The Shipboard Observation Form for Floating Marine Debris was created based on methods used in studies of floating marine... Observation Form for Floating Marine Debris AGENCY: National Oceanic and Atmospheric Administration...

  19. Oscillating and star-shaped drops levitated by an airflow

    CERN Document Server

    Bouwhuis, Wilco; Peters, Ivo R; Brunet, Philippe; van der Meer, Devaraj; Snoeijer, Jacco H

    2013-01-01

    We investigate the spontaneous oscillations of drops levitated above an air cushion, eventually inducing a breaking of axisymmetry and the appearance of `star drops'. This is strongly reminiscent of the Leidenfrost stars that are observed for drops floating above a hot substrate. The key advantage of this work is that we inject the airflow at a constant rate below the drop, thus eliminating thermal effects and allowing for a better control of the flow rate. We perform experiments with drops of different viscosities and observe stable states, oscillations and chimney instabilities. We find that for a given drop size the instability appears above a critical flow rate, where the latter is largest for small drops. All these observations are reproduced by numerical simulations, where we treat the drop using potential flow and the gas as a viscous lubrication layer. Qualitatively, the onset of instability agrees with the experimental results, although the typical flow rates are too large by a factor 10. Our results...

  20. Dispersive solid-phase extraction followed by vortex-assisted dispersive liquid-liquid microextraction based on the solidification of a floating organic droplet for the determination of benzoylurea insecticides in soil and sewage sludge.

    Science.gov (United States)

    Peng, Guilong; He, Qiang; Mmereki, Daniel; Lu, Ying; Zhong, Zhihui; Liu, Hanyang; Pan, Weiliang; Zhou, Guangming; Chen, Junhua

    2016-04-01

    A novel dispersive solid-phase extraction combined with vortex-assisted dispersive liquid-liquid microextraction based on solidification of floating organic droplet was developed for the determination of eight benzoylurea insecticides in soil and sewage sludge samples before high-performance liquid chromatography with ultraviolet detection. The analytes were first extracted from the soil and sludge samples into acetone under optimized pretreatment conditions. Clean-up of the extract was conducted by dispersive solid-phase extraction using activated carbon as the sorbent. The vortex-assisted dispersive liquid-liquid microextraction based on solidification of floating organic droplet procedure was performed by using 1-undecanol with lower density than water as the extraction solvent, and the acetone contained in the solution also acted as dispersive solvent. Under the optimum conditions, the linearity of the method was in the range 2-500 ng/g with correlation coefficients (r) of 0.9993-0.9999. The limits of detection were in the range of 0.08-0.56 ng/g. The relative standard deviations varied from 2.16 to 6.26% (n = 5). The enrichment factors ranged from 104 to 118. The extraction recoveries ranged from 81.05 to 97.82% for all of the analytes. The good performance has demonstrated that the proposed methodology has a strong potential for application in the multiresidue analysis of complex matrices.

  1. FLOAT Project - Task 1

    DEFF Research Database (Denmark)

    Marchalot, Tanguy; Kofoed, Jens Peter; Sørensen, Eigil V.

    The objective of the FLOAT project is to study the reliability of high-performance fibre-reinforced concrete, also known as Compact Reinforced Composite (CRC), for the floats of wave energy converters. In order to reach commercial breakthrough, wave energy converters need to achieve a lower price...... of energy produced, comparable to prices currently obtained from offshore wind power, and this can be done by the use of more suitable materials. The flotation device is a key part of converters, as it accounts for a considerable share of initial investment, up to 27% depending on the converter (dexawave.......com, 2011). CRC floats could be a very cost-effective technology with enhanced loading capacity and environmental resistance, and very low maintenance requirements, affecting directly the final energy price. The project involves DEXA Wave Energy Ltd, Wave Star A/S, Aalborg University and Hi-Con A...

  2. Floating offshore turbines

    DEFF Research Database (Denmark)

    Tande, John Olav Giæver; Merz, Karl; Schmidt Paulsen, Uwe

    2014-01-01

    phase applying (mostly) well-known technology, albeit in a new setting. DeepWind is a European research project based mostly on new technology. The concepts are described in some detail with emphasis on control and operation. Prospects are discussed including technical challenges and a performance...... metric of energy production per unit steel mass. Floating offshore wind turbines represent a promising technology. The successful operation of HyWind and WindFloat in full scale demonstrates a well advanced technology readiness level, where further development will go into refining the concepts, cost...

  3. Floating Versus Sinking

    Science.gov (United States)

    Vella, Dominic

    2015-01-01

    Small objects that are more dense than water may still float at the air-water interface because of surface tension. Whether this is possible depends not only on the density and size of the object, but also on its shape and surface properties, whether other objects are nearby, and how gently the object is placed at the interface. This review surveys recent work to quantify when objects can float and when they must sink. Much interest in this area has been driven by studies of the adaptations of water-walking insects to life at interfaces. I therefore discuss these results in the context of this and other applications.

  4. Proceedings of the Second International Colloquium on Drops and Bubbles

    Science.gov (United States)

    Lecroissette, D. H. (Editor)

    1982-01-01

    Applications of bubble and drop technologies are discussed and include: low gravity manufacturing, containerless melts, microballoon fabrication, ink printers, laser fusion targets, generation of organic glass and metal shells, and space processing. The fluid dynamics of bubbles and drops were examined. Thermomigration, capillary flow, and interfacial tension are discussed. Techniques for drop control are presented and include drop size control and drop shape control.

  5. Vegetation, substrate and hydrology in floating marshes in the Mississippi river delta plain wetlands, USA

    Science.gov (United States)

    Sasser, C.E.; Gosselink, J.G.; Swenson, E.M.; Swarzenski, C.M.; Leibowitz, N.C.

    1996-01-01

    In the 1940s extensive floating marshes (locally called 'flotant') were reported and mapped in coastal wetlands of the Mississippi River Delta Plain. These floating marshes included large areas of Panicum hemitomon-dominated freshwater marshes, and Spartina patens/Scirpus olneyi brackish marshes. Today these marshes appear to be quite different in extent and type. We describe five floating habitats and one non-floating, quaking habitat based on differences in buoyancy dynamics (timing and degree of floating), substrate characteristics, and dominant vegetation. All floating marshes have low bulk density, organic substrates. Nearly all are fresh marshes. Panicum hemitomon floating marshes presently occur within the general regions that were reported in the 1940's by O'Neil, but are reduced in extent. Some of the former Panicum hemitomon marshes have been replaced by seasonally or variably floating marshes dominated, or co-dominated by Sagittaria lancifolia or Eleocharis baldwinii. ?? 1996 Kluwer Academic Publishers.

  6. Tethered float liquid level sensor

    Energy Technology Data Exchange (ETDEWEB)

    Daily, III, William Dean

    2016-09-06

    An apparatus for sensing the level of a liquid includes a float, a tether attached to the float, a pulley attached to the tether, a rotation sensor connected to the pulley that senses vertical movement of said float and senses the level of the liquid.

  7. UFO: "Unidentified" Floating Object Driven by Thermocapillarity

    CERN Document Server

    Zhao, Yuejun

    2010-01-01

    In this fluid dynamics video, we show thermocapillary actuation of a binary drop of water and heptanol where the binary drop in motion takes on a UFO-like shape. On a parylene-coated silicon surface subjected to a linear temperature gradient, a pure heptanol droplet quickly moves to the cold side by the Marangoni stress, while a pure water droplet remains stuck due to a large contact angle hysteresis. When the water droplet was encapsulated by a thin layer of heptanol and thermally actuated, the binary droplet takes on a peculiar shape resembling an UFO, i.e. an "unidentified" floating object as the mechanism is not yet completely understood. Our finding suggests that pure liquid droplets (e.g. aqueous solutions) that are not conducive to thermocapillary actuation can be made so by encapsulating them with another judiciously chosen liquid (e.g. heptanol).

  8. Star-shaped Oscillations of Leidenfrost Drops

    CERN Document Server

    Ma, Xiaolei; Burton, Justin C

    2016-01-01

    We experimentally investigate the self-organized, star-shaped oscillations of Leidenfrost drops. The drops levitate on a cushion of evaporated vapor over a heated, curved surface. We observe modes with $n = 2-13$ lobes around the drop periphery. We find that both the wavelength and frequency of the oscillations depend only on the capillary length of the liquid, and are independent of the drop radius and substrate temperature. However, the number of observed modes depend sensitively on the liquid viscosity. The dominant frequency of pressure variations under the drop is approximately twice that the drop oscillation frequency, consistent with a parametric forcing mechanism. Our results suggest that the star-shaped oscillations are hydrodynamic in origin, and are driven by capillary waves beneath the drop. The exact mechanism by which the vapor flow initiates the capillary waves is likely related to static "brim waves" in levitated, viscous drops.

  9. Ultrasound-assisted dispersive liquid-liquid microextraction based on the solidification of a floating organic droplet followed by gas chromatography for the determination of eight pyrethroid pesticides in tea samples.

    Science.gov (United States)

    Hou, Xiaohong; Zheng, Xin; Zhang, Conglu; Ma, Xiaowei; Ling, Qiyuan; Zhao, Longshan

    2014-10-15

    A novel ultrasound-assisted dispersive liquid-liquid microextraction based on solidification of floating organic droplet method (UA-DLLME-SFO) combined with gas chromatography (GC) was developed for the determination of eight pyrethroid pesticides in tea for the first time. After ultrasound and centrifugation, 1-dodecanol and ethanol was used as the extraction and dispersive solvent, respectively. A series of parameters, including extraction solvent and volume, dispersive solvent and volume, extraction time, pH, and ultrasonic time influencing the microextraction efficiency were systematically investigated. Under the optimal conditions, the enrichment factors (EFs) were from 292 to 883 for the eight analytes. The linear ranges for the analytes were from 5 to 100μg/kg. The method recoveries ranged from 92.1% to 99.6%, with the corresponding RSDs less than 6.0%. The developed method was considered to be simple, fast, and precise to satisfy the requirements of the residual analysis of pyrethroid pesticides.

  10. Floating Ocean Platform

    Science.gov (United States)

    2003-08-15

    REVIEW, 83-89 Int. Hydrogr. Rev., 1986 ARANHA , JAP PESCE, CP, EFFECT OF THE 2ND-ORDER POTENTIAL IN THE SLOW-DRIFT OSCILLATION OF A FLOATING STRUCTURE...Technology Conference, Annual Proceedings, v 3, Construction & Installation/Field Drilling and Development Systems, 1997, OTC 8696, p 133-142 Aranha , J...Andre J.P. (Petrobras/Depro); Nishimoto, Kazuo; Aranha , J.A.P.; Morooka, Celso K., Minimization of vertical wave exciting force and heave motion of a

  11. Serial floating point formatter

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, R. D.; Penner, W. A.

    1985-11-12

    A floating point formatter for changing fixed point serial digital data, such as that received by a seismic data acquisition system, is disclosed wherein fixed point serial digital data is received and scaled to remove any bias added by preamplification. The scaled data is shifted a predetermined number of bits and a resulting exponent is calculated. The shifted data signal and corresponding exponent are combined and further scaled to permit stacking the data without exceeding the system capacity.

  12. Floating point coprocessor upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Weber, T.

    1987-04-01

    A method was developed to increase the throughput of the Hewlett Packard, 98635A floating point processor equipped, model 236C computer. The increase was carried out in three phases each with a clock and or chip change during the modification. Two programs were written to test the results and evaluate the increases in performance made to the computer. The first one shows reduction in processing times of 34.3%, while the other recorded 34.6%.

  13. Impact on floating membranes

    OpenAIRE

    Vandenberghe, Nicolas; Duchemin, Laurent

    2016-01-01

    When impacted by a rigid object, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. In the first place, a longitudinal wave front -- associated with in-plane deformation of the membrane and traveling at constant speed -- separates an outward stress free domain with a stretched but flat domain. Then, in the stretched domain a dispersive transverse wave travels at a wave speed that depends...

  14. Tapered Optical Fiber Functionalized with Palladium Nanoparticles by Drop Casting and Laser Radiation for H2 and Volatile Organic Compounds Sensing Purposes

    Science.gov (United States)

    González-Sierra, Nancy Elizabeth; Gómez-Pavón, Luz del Carmen; Pérez-Sánchez, Gerardo Francisco; Luis-Ramos, Arnulfo; Zaca-Morán, Plácido; Chávez-Ramírez, Fernando

    2017-01-01

    A comparative study on the sensing properties of a tapered optical fiber pristine and functionalized with the palladium nanoparticles to hydrogen and volatile organic compounds (VOCs), is presented. The sensor response and, response/recovery times were extracted from the measurements of the transient response of the device. The tapered optical fiber sensor was fabricated using a single-mode optical fiber by the flame-brushing technique. Functionalization of the optical fiber was performed using an aqueous solution of palladium chloride by drop-casting technique assisted for laser radiation. The detection principle of the sensor is based on the changes in the optical properties of palladium nanoparticles when exposed to reducing gases, which causes a variation in the absorption of evanescent waves. A continuous wave laser diode operating at 1550 nm is used for the sensor characterization. The sensor functionalized with palladium nanoparticles by this technique is viable for the sensing of hydrogen and VOCs, since it shows an enhancement in sensor response and response time compared to the sensor based on the pristine optical microfiber. The results show that the fabricated sensor is competitive with other fiber optic sensors functionalized with palladium nanoparticles to the hydrogen. PMID:28878161

  15. Flow boiling heat transfer and pressure drop characteristics of R134a, R1234yf and R1234ze in a plate heat exchanger for organic Rankine cycle units

    DEFF Research Database (Denmark)

    Zhang, Ji; Desideri, Adriano; Kærn, Martin Ryhl

    2017-01-01

    . This paper is aimed at obtaining flow boiling heat transfer and pressure drop characteristics in a plate heat exchanger under the working conditions prevailing in the evaporator of organic Rankine cycle units. Two hydrofluoroolefins R1234yf and R1234ze, and one hydrofluorocarbon R134a, were selected...

  16. Use of volatile organic solvents in headspace liquid-phase microextraction by direct cooling of the organic drop using a simple cooling capsule.

    Science.gov (United States)

    Ghiasvand, Ali Reza; Yazdankhah, Fatemeh; Hajipour, Somayeh

    2016-08-01

    A low-cost and simple cooling-assisted headspace liquid-phase microextraction device for the extraction and determination of 2,6,6-trimethyl-1,3 cyclohexadiene-1-carboxaldehyde (safranal) in Saffron samples, using volatile organic solvents, was fabricated and evaluated. The main part of the cooling-assisted headspace liquid-phase microextraction system was a cooling capsule, with a Teflon microcup to hold the extracting organic solvent, which is able to directly cool down the extraction phase while the sample matrix is simultaneously heated. Different experimental factors such as type of organic extraction solvent, sample temperature, extraction solvent temperature, and extraction time were optimized. The optimal conditions were obtained as: extraction solvent, methanol (10 μL); extraction temperature, 60°C; extraction solvent temperature, 0°C; and extraction time, 20 min. Good linearity of the calibration curve (R(2) = 0.995) was obtained in the concentration range of 0.01-50.0 μg/mL. The limit of detection was 0.001 μg/mL. The relative standard deviation for 1.0 μg/mL of safranal was 10.7% (n = 6). The proposed cooling-assisted headspace liquid-phase microextraction device was coupled (off-line) to high-performance liquid chromatography and used for the determination of safranal in Saffron samples. Reasonable agreement was observed between the results of the cooling-assisted headspace liquid-phase microextraction high-performance liquid chromatography method and those obtained by a validated ultrasound-assisted solvent extraction procedure.

  17. Collapsing floating-point operations

    OpenAIRE

    Defour, David

    2004-01-01

    This paper addresses the issue of collapsing dependent floating-point operations. The presentation focuses on studying the dataflow graph of benchmark involving a large number of floating-point instructions. In particular, it focuses on the relevance of new floating-point operators performing two dependent operations which are similar to "fused multiply and add". Finally, this paper examines the implementation cost and critical path reduction from this strategy.

  18. FLOPAK: FLOATING POINT PROGRAMING PACKAGE,

    Science.gov (United States)

    FLOPAK is a Packard-Bell 250 Computer semi-automatic, floating - point programing system which may be operated simultaneously in either of two modes...250 floating - point system available which may be used in real-time control. The system was originally designed to solve a real-time communication problem....The first is a non-time optimized mode which may be used by inex perienced coders; the second mode is a high-speed, fully time-optimized floating

  19. Coalescence of a Drop inside another Drop

    Science.gov (United States)

    Mugundhan, Vivek; Jian, Zhen; Yang, Fan; Li, Erqiang; Thoroddsen, Sigurdur

    2016-11-01

    Coalescence dynamics of a pendent drop sitting inside another drop, has been studied experimentally and in numerical simulations. Using an in-house fabricated composite micro-nozzle, a smaller salt-water drop is introduced inside a larger oil drop which is pendent in a tank containing the same liquid as the inner drop. On touching the surface of outer drop, the inner drop coalesces with the surrounding liquid forming a vortex ring, which grows in time to form a mushroom-like structure. The initial dynamics at the first bridge opening up is quantified using Particle Image Velocimetry (PIV), while matching the refractive index of the two liquids. The phenomenon is also numerically simulated using the open-source code Gerris. The problem is fully governed by two non-dimensional parameters: the Ohnesorge number and the diameter ratios of the two drops. The validated numerical model is used to better understand the dynamics of the phenomenon. In some cases a coalescence cascade is observed with liquid draining intermittently and the inner drop reducing in size.

  20. Formulation and characterization of rifabutin loaded floating gellan gum beads

    OpenAIRE

    2011-01-01

    Rifabutin loaded floating gellan gum beads were prepared by Ca++ induced ionotropic gelation in acidic medium by drop wise addition of gellan gum dispersion containing drug and gas-generating agent. The prepared beads were evaluated for in vitro characterization and in vivo Helicobacter pylori clearance efficiency following repeated oral administration to H. pylori infected albino rats. Live cell staining of stomach homogenates of H. pylori infected animals treated with rifabutin showed prono...

  1. Study on Floating Properties and Stability of Air Floated Structures

    Institute of Scientific and Technical Information of China (English)

    别社安; 及春宁; 任增金; 李增志

    2002-01-01

    In this paper, the buoyancy, kinetic properties and stability of air floated structures have been studied by theoreticaland experimental methods. The equations for calculation of the buoyancy of the air floated buoy are derived according tothe Boyler law and the equilibrium equations of the air floated structure are established. Through simplification of the airfloated structure as a single freedom rigid body and spring system, the natural period of heaving and some kinetic proper-ties are discussed. In the stability analysis, the formulas for calculation of the meta centric height are presented. The the-oretical results are in good agreement with the data observed from the model test and prototype test. The air buoyancy de-crease coefficient presented in this paper has a large influence on the floating state, stability and dynamic properties of theair floated structure. The stability of the air floated structure can also be judged by the parameter of meta centric height,and calculations show that the air floated structure is less stable than the conventional float.

  2. Floating JMaRT

    CERN Document Server

    Bossard, Guillaume

    2014-01-01

    We define a new partially solvable system of equations that parametrises solutions to six-dimensional N=(1,0) ungauged supergravity coupled to tensor multiplets. We obtain this system by applying a series of dualities on the known floating brane system, imposing that it allows for the JMaRT solution. We construct an explicit multi-centre solution generalising the JMaRT solution, with an arbitrary number of additional BPS centres on a line. We describe explicitly the embedding of the JMaRT solution in this system in five dimensions.

  3. [Free-Floating Intraocular Cysts].

    Science.gov (United States)

    Werner, Jens Ulrich; Lang, Gerhard K; Enders, Christian

    2017-05-03

    Background Free-floating intraocular cysts may be found in the anterior chamber (FZV) and the vitreous (FZG). The first description of a cyst was 150 years ago, and they are considered to be ocular rarities. Materials and Methods The actual knowledge about FZV and FZG is shown on the basis of two exemplary patients. Results and Discussion Patient 1 had a FZV as an incidental finding which had a smooth surface, a slight pigmentation and was translucent. The ultrasound biomicroscopy revealed an echo-free interior space. Without the patient's discomfort and missing treatment indication, a watch-and-wait strategy was chosen. Cysts of the iris can be classified as primary and secondary cysts. Primary cysts of the iris can arise from the stroma as the pigment epithelium wherein it is believed that FZV descend from the pigment epithelium. Secondary cysts and FZV can be generated by tumors, inflammation, epithelial ingrowth, the use of eye-drops or intraocular foreign bodies. Patient 2 showed marked myopic fundus changes and an FZG with a yellowish-greenish surface; the transparency was reduced and the surface was not pigmented. The ultrasound examination also revealed an echo-free interior space. Clinical controls were advised. Congenital and acquired causes are discussed for the formation of FZG. FZG could originate from the pigment epithelium of the iris, but there are conflicting study results. Trauma, inflammation and chorioretinal diseases are considered as a reason for acquired causes of FZG. The genesis, especially of FZG, is still unclear. For the treatment of patients with FZV and FZG, it is important to know the potential causes to be able to make a therapeutic decision. High quality photographic and sonographic documentation is needed in the watch-and-wait strategy. Georg Thieme Verlag KG Stuttgart · New York.

  4. Floating shoulder” injuries

    OpenAIRE

    Heng, Kenneth

    2016-01-01

    Floating shoulder” is a rare injury complex resulting from high-energy blunt force trauma to the shoulder, resulting in scapulothoracic dissociation. It is commonly associated with catastrophic neurovascular injury. Two cases of motorcyclists with floating shoulder injuries are described.

  5. Floating microspheres: a review

    Directory of Open Access Journals (Sweden)

    Jagtap Yogesh Mukund

    2012-03-01

    Full Text Available Gastric emptying is a complex process, one that is highly variable and that makes in vivo performance of drug delivery systems uncertain. A controlled drug delivery system with prolonged residence time in the stomach can be of great practical importance for drugs with an absorption window in the upper small intestine. The main limitations are attributed to the inter- and intra-subject variability of gastro-intestinal (GI transit time and to the non-uniformity of drug absorption throughout the alimentary canal. Floating or hydrodynamically controlled drug delivery systems are useful in such applications. Various gastroretentive dosage forms are available, including tablets, capsules, pills, laminated films, floating microspheres, granules and powders. Floating microspheres have been gaining attention due to the uniform distribution of these multiple-unit dosage forms in the stomach, which results in more reproducible drug absorption and reduced risk of local irritation. Such systems have more advantages over the single-unit dosage forms. The present review briefly addresses the physiology of the gastric emptying process with respect to floating drug delivery systems. The purpose of this review is to bring together the recent literature with respect to the method of preparation, and various parameters affecting the performance and characterization of floating microspheres.O esvaziamento gástrico é um processo complexo, com elevada variabilidade e responsável pela incerteza do desempenho dos medicamentos in vivo. Dessa forma, os sistemas de liberação modificada de fármacos, com tempo de residência prolongado no estômago, em especial, considerando aqueles fármacos com janela de absorção na porção superior do intestino delgado, apresentam fundamental importância. As principais limitações relativas à absorção do fármaco são, no geral, atribuídas à variabilidade inter e intra-paciente do tempo de trânsito gastro-intestinal (GI e

  6. Eye Drop Tips

    Science.gov (United States)

    ... Involved News About Us Donate In This Section Eye Drop Tips en Español email Send this article ... the reach of children. Steps For Putting In Eye Drops: Start by tilting your head backward while ...

  7. Dilating Eye Drops

    Science.gov (United States)

    ... Corneal Abrasions Dilating Eye Drops Lazy eye (defined) Pink eye (defined) Retinopathy of Prematurity Strabismus Stye (defined) Vision ... Corneal Abrasions Dilating Eye Drops Lazy eye (defined) Pink eye (defined) Retinopathy of Prematurity Strabismus Stye (defined) Vision ...

  8. Impact on floating membranes

    CERN Document Server

    Vandenberghe, Nicolas

    2016-01-01

    When impacted by a rigid object, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. In the first place, a longitudinal wave front -- associated with in-plane deformation of the membrane and traveling at constant speed -- separates an outward stress free domain with a stretched but flat domain. Then, in the stretched domain a dispersive transverse wave travels at a wave speed that depends on the local stretching rate. We study the dynamics of this fluid-body system and we show that the wave dynamics is similar to the capillary waves that propagate at a liquid-gas interface but with a surface tension coefficient that depends on impact speed. We emphasize the role of the stretching in the membrane in the wave dynamics but also in the development of a buckling instability that give rise to radial wrinkles.

  9. Inspiration Was Just Floating in the Natural Air-Research in Key Laboratory of Organic Solids, Institute of Chemistry of CAS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Sponsored by NSFC,CAS,and Ministry of Science and Technology,the Key Lab of Organic Solids in Institute of Chemistry of CAS developed tungsten oxide "light switch" membrane,which has wetting and discolorment abilities.

  10. Performance Analysis of an Evaporator for a Diesel Engine–Organic Rankine Cycle (ORC Combined System and Influence of Pressure Drop on the Diesel Engine Operating Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Bei

    2015-06-01

    Full Text Available The main purpose of this research is to analyze the performance of an evaporator for the organic Rankine cycle (ORC system and discuss the influence of the evaporator on the operating characteristics of diesel engine. A simulation model of fin-and-tube evaporator of the ORC system is established by using Fluent software. Then, the flow and heat transfer characteristics of the exhaust at the evaporator shell side are obtained, and then the performance of the fin-and-tube evaporator of the ORC system is analyzed based on the field synergy principle. The field synergy angle (β is the intersection angle between the velocity vector and the temperature gradient. When the absolute values of velocity and temperature gradient are constant and β < 90°, heat transfer enhancement can be achieved with the decrease of the β. When the absolute values of velocity and temperature gradient are constant and β >90°, heat transfer enhancement can be achieved with the increase of the β. Subsequently, the influence of the evaporator of the ORC system on diesel engine performance is studied. A simulation model of the diesel engine is built by using GT–Power software under various operating conditions, and the variation tendency of engine power, torque, and brake specific fuel consumption (BSFC are obtained. The variation tendency of the power output and BSFC of diesel engine–ORC combined system are obtained when the evaporation pressure ranges from 1.0 MPa to 3.5 MPa. Results show that the field synergy effect for the areas among the tube bundles of the evaporator main body and the field synergy effect for the areas among the fins on the windward side are satisfactory. However, the field synergy effect in the areas among the fins on the leeward side is weak. As a result of the pressure drop caused by the evaporator of the ORC system, the diesel engine power and torque decreases slightly, whereas the BSFC increases slightly with the increase of exhaust back

  11. Vortex-assisted surfactant-enhanced-emulsification liquid-liquid microextraction with solidification of floating organic droplet combined with flame atomic absorption spectrometry for the fast determination of cadmium in water samples.

    Science.gov (United States)

    Peng, Guilong; Lu, Ying; He, Qiang; Mmereki, Daniel; Tang, Xiaohui; Zhong, Zhihui; Zhao, Xiaolong

    2016-01-01

    A novel vortex-assisted surfactant-enhanced-emulsification liquid-liquid microextraction with solidification of floating organic droplet (VSLLME-SFO) was developed for the fast, simple and efficient determination of cadmium (Cd) in water samples followed by flame atomic absorption spectrometry (FAAS). In the VSLLME-SFO process, the addition of surfactant (as an emulsifier), could enhance the mass transfer from the aqueous solution into the extraction solvent. The extraction solvent could be dispersed into the aqueous phase under vigorous shaking with the vortex. In this paper, we investigated the influences of analytical parameters, including pH, extraction solvent type and its volume, surfactant type and its volume, concentration of chelating agent, salt effect and vortex time, on the extraction efficiency of Cd. Under the optimized conditions, the limit of detection was 0.16 μg/L. The analyte enrichment factor was 37.68. The relative standard deviation was 3.2% (10 μg/L, n = 10) and the calibration graph was linear, ranging from 0.5 to 30 μg/L. The proposed method was successfully applied for the analysis of ultra-trace Cd in river water and wastewater samples.

  12. Application of dispersive Liquid-Liquid microextraction based on solidification of floating organic droplet multi-residue method for the simultaneous determination of polychlorinated biphenyls, organochlorine, and pyrethroid pesticides in aqueous sample

    Energy Technology Data Exchange (ETDEWEB)

    Zuo, Mei; Li, Man-Liang [Enshi Prefecture Tobacco Company, Enshi, Hubei (China); Cheng, Jing; Matsadiq, Guzalnur; Liu, Lu; Zhang, Miao [Key Laboratory of Pesticide and Chemical Biology, Ministry of Education, College of Chemistry, Central China Normal University, Wuhan (China)

    2012-12-15

    Dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) technique was successfully applied for simultaneous assay of eight polychlorinated biphenyls, two organochlorine, and four pyrethroid pesticides multi-residue in aqueous samples by using GC-electron capture detection. The effects of various parameters such as kind of extractant and dispersant and volume of them, extraction time, effect of salt addition, and pH were optimized. As a result, 5.0 {mu}L 1-dodecanol was chosen as extraction solvent, 600 {mu}L methanol were used as dispersive solvent without salt addition, pH was adjusted to 7. Under the optimized conditions, the limits of detection (LOD) were ranged from 1.4 to 8.3 ng L{sup -1}. Satisfactory linear range was observed from 5.0 to 2000 ng L{sup -1} with correlation coefficient better than 0.9909. Good precisions were also acquired with RSD better than 13.6% for all target analytes. The enrichment factors of the method were ranged from 786 to 1427. The method can be successfully applied to simultaneous separation and determination of three class residues in real water samples and good recoveries were obtained ranging from 76 to 130, 73 to 129, and 78 to 130% for tap water, lake water, and industrial waste water, respectively. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. A novel extraction method for β-carotene and other carotenoids in fruit juices using air-assisted, low-density solvent-based liquid-liquid microextraction and solidified floating organic droplets.

    Science.gov (United States)

    Sricharoen, Phitchan; Limchoowong, Nunticha; Techawongstien, Suchila; Chanthai, Saksit

    2016-07-15

    Green extraction using air-assisted, low-density solvent-based liquid-liquid microextraction and solidified floating organic droplets (AA-LDS-LLME-SFOD) prior to spectrophotometry was successfully applied for quantitation of carotenoids in fruit juices. Under optimal conditions, β-carotene could be quantified with a linear response up to a concentration of 60 μg mL(-1). The procedure was performed in a microcentrifuge tube with 40 μL of 1-dodecanol as the extraction solvent and a 1.0 mL juice sample containing 8% NaCl under seven extraction cycles of air pumping by syringe. This method was validated based on linearity (0.2-30 μg mL(-1), R(2) 0.998), limit of detection (0.04 μg mL(-1)) and limit of quantification (0.13 μg mL(-1)). The precision, expressed as the relative standard deviation (RSD) of the calibration curve slope (n=12), for inter-day and intra-day analysis was 4.85% and 7.92%, respectively. Recovery of β-carotene was in the range of 93.6-101.5%. The newly proposed method is simple, rapid and environmentally friendly, particularly as a useful screening test for food analysis.

  14. Speciation of Tl(III and Tl(I in hair samples by dispersive liquid–liquid microextraction based on solidification of floating organic droplet prior to flame atomic absorption spectrometry determination

    Directory of Open Access Journals (Sweden)

    S.Z. Mohammadi

    2016-11-01

    Full Text Available Dispersive liquid–liquid microextraction based on solidification of floating organic droplet was successfully used as a sample preparation method prior to flame atomic absorption determination of trace amounts of Tl(III and Tl(I in hair samples. In the proposed method, 1-(2-pyridylazo-2-naphthol, 1-dodecanol and ethanol were used as chelating agent, extraction and dispersive solvent, respectively. Several factors that may be affected in the extraction process, such as type and volume of extraction and disperser solvents, pH, salting out effect, ionic strength and extraction time were studied. Under the optimal conditions, linearity was maintained between 6.0 and 900.0 ng mL−1 for Tl(III. The relative standard deviation for seven replicate determinations of 0.2 μg mL−1 Tl(III was 2.5%. The detection limit based on 3Sb for Tl(III in the original solution was 2.1 ng mL−1. The proposed method has been applied for the determination of trace amounts of thallium in hair samples and satisfactory results were obtained.

  15. NULL Convention Floating Point Multiplier

    Directory of Open Access Journals (Sweden)

    Anitha Juliette Albert

    2015-01-01

    Full Text Available Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

  16. NULL convention floating point multiplier.

    Science.gov (United States)

    Albert, Anitha Juliette; Ramachandran, Seshasayanan

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

  17. Electrically floating, near vertical incidence, skywave antenna

    Science.gov (United States)

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  18. NULL Convention Floating Point Multiplier

    OpenAIRE

    Anitha Juliette Albert; Seshasayanan Ramachandran

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to p...

  19. Large floating structures technological advances

    CERN Document Server

    Wang, BT

    2015-01-01

    This book surveys key projects that have seen the construction of large floating structures or have attained detailed conceptual designs. This compilation of key floating structures in a single volume captures the innovative features that mark the technological advances made in this field of engineering, and will provide a useful reference for ideas, analysis, design, and construction of these unique and emerging urban projects to offshore and marine engineers, urban planners, architects and students.

  20. Floating wind turbine system

    Science.gov (United States)

    Viterna, Larry A. (Inventor)

    2009-01-01

    A floating wind turbine system with a tower structure that includes at least one stability arm extending therefrom and that is anchored to the sea floor with a rotatable position retention device that facilitates deep water installations. Variable buoyancy for the wind turbine system is provided by buoyancy chambers that are integral to the tower itself as well as the stability arm. Pumps are included for adjusting the buoyancy as an aid in system transport, installation, repair and removal. The wind turbine rotor is located downwind of the tower structure to allow the wind turbine to follow the wind direction without an active yaw drive system. The support tower and stability arm structure is designed to balance tension in the tether with buoyancy, gravity and wind forces in such a way that the top of the support tower leans downwind, providing a large clearance between the support tower and the rotor blade tips. This large clearance facilitates the use of articulated rotor hubs to reduced damaging structural dynamic loads. Major components of the turbine can be assembled at the shore and transported to an offshore installation site.

  1. Impact on floating membranes

    Science.gov (United States)

    Vandenberghe, Nicolas; Duchemin, Laurent

    2016-05-01

    When impacted by a rigid body, a thin elastic membrane with negligible bending rigidity floating on a liquid pool deforms. Two axisymmetric waves radiating from the impact point propagate. First, a longitudinal wave front, associated with in-plane deformation of the membrane and traveling at constant speed, separates an outward stress-free domain from a stretched domain. Then, in the stretched domain a dispersive transverse wave travels at a speed that depends on the local stretching rate. The dynamics is found to be self-similar in time. Using this property, we show that the wave dynamics is similar to the capillary waves that propagate at a liquid-gas interface but with a surface tension coefficient that depends on impact speed. During wave propagation, we observe the development of a buckling instability that gives rise to radial wrinkles. We address the dynamics of this fluid-body system, including the rapid deceleration of an impactor of finite mass, an issue that may have applications in the domain of absorption of impact energy.

  2. Ultrasound-assisted surfactant-enhanced emulsification microextraction based on the solidification of a floating organic droplet used for the simultaneous determination of six fungicide residues in juices and red wine.

    Science.gov (United States)

    You, Xiangwei; Wang, Suli; Liu, Fengmao; Shi, Kaiwei

    2013-07-26

    A novel ultrasound-assisted surfactant-enhanced emulsification microextraction technique based on the solidification of a floating organic droplet followed by high performance liquid chromatography with diode array detection was developed for simultaneous determination of six fungicide residues in juices and red wine samples. The low-toxicity solvent, 1-dodecanol, was used as an extraction solvent. For its low density and proper melting point near room temperature, the extractant droplet was collected easily by solidifying it at a low temperature. The surfactant, Tween 80, was used as an emulsifier to enhance the dispersion of the water-immiscible extraction solvent into an aqueous phase, which hastened the mass-transfer of the analytes. Organic dispersive solvent typically required in common dispersive liquid-liquid microextraction methods was not used in the proposed method. Some parameters (e.g., the type and volume of extraction solvent, the type and concentration of surfactant, ultrasound extraction time, salt addition, and volume of samples) that affect the extraction efficiency were optimized. The proposed method showed a good linearity within the range of 5μgL(-1)-1000μgL(-1), with the correlation coefficients (γ) higher than 0.9969. The limits of detection for the method ranged from 0.4μgL(-1) to 1.4μgL(-1). Further, this simple, practical, sensitive, and environmentally friendly method was successfully applied to determine the target fungicides in juice and red wine samples. The recoveries of the target fungicides in red wine and fruit juice samples were 79.5%-113.4%, with relative standard deviations that ranged from 0.4% to 12.3%.

  3. Ultrasound leaching-dispersive liquid-liquid microextraction based on solidification of floating organic droplet for determination of polybrominated diphenyl ethers in sediment samples by gas chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Lana, Nerina B; Berton, Paula; Covaci, Adrian; Atencio, Adrián G; Ciocco, Néstor F; Altamirano, Jorgelina C

    2013-04-12

    Ultrasound leaching-dispersive liquid-liquid microextraction using solidification of floating organic droplet (USL-DLLME-SFO) technique is proposed for extraction and isolation of polybrominated diphenyl ethers (PBDEs) from sediment and further determination by gas chromatography-tandem mass spectrometry (GC-MS/MS). Parameters that affect the efficiency of the procedure were investigated by a full factorial (2(k)) screening design. Variables showing significant effects on the analytical responses were considered within a further central composite design (CCD). The optimization assays have led to following protocol: ultrasound assisted lixiviation of 1g sediment was carried out by using 1.2 mL MeOH. Further, the analytes were isolated from 0.4 mL of the extract using the DLLME-SFO technique. The microextraction was performed using 0.1 mL MeOH, 22 mg 1-dodecanol, 1 mL NaCl solution 6.15M and 4.4 mL ultrapure water as dispersive and extracting solvents, medium ionic strength and dispersant bulk, respectively. Under optimum conditions, the method exhibits good performance in terms of linearity and precision (RSD<9.2%), with recoveries above 71% and limits of detection (LODs) within the range 0.5-1.8 pgg(-1) dry weight (d.w.). Method validation was demonstrated through the analysis of environmental sediment samples in which PBDEs were detected and quantified. The presence of BDE-47, -100, -99 and -153 was reported within the concentration range of organic solvents consumption, sample manipulation, and increases sample throughput.

  4. Bubble and drop interfaces

    CERN Document Server

    Miller

    2011-01-01

    The book aims at describing the most important experimental methods for characterizing liquid interfaces, such as drop profile analysis, bubble pressure and drop volume tensiometry, capillary pressure technique, and oscillating drops and bubbles. Besides the details of experimental set ups, also the underlying theoretical basis is presented in detail. In addition, a number of applications based on drops and bubbles is discussed, such as rising bubbles and the very complex process of flotation. Also wetting, characterized by the dynamics of advancing contact angles is discussed critically. Spec

  5. SEMICONDUCTOR DEVICES: Trench gate IGBT structure with floating P region

    Science.gov (United States)

    Mengliang, Qian; Zehong, Li; Bo, Zhang; Zhaoji, Li

    2010-02-01

    A new trench gate IGBT structure with a floating P region is proposed, which introduces a floating P region into the trench accumulation layer controlled IGBT (TAC-IGBT). The new structure maintains a low on-state voltage drop and large forward biased safe operating area (FBSOA) of the TAC-IGBT structure while reduces the leakage current and improves the breakdown voltage. In addition, it enlarges the short circuit safe operating area (SCSOA) of the TAC-IGBT, and is simple in fabrication and design. Simulation results indicate that, for IGBT structures with a breakdown voltage of 1200 V, the leakage current of the new trench gate IGBT structure is one order of magnitude lower than the TAC-IGBT structure and the breakdown voltage is 150 V higher than the TAC-IGBT.

  6. Turbulence, bubbles and drops

    NARCIS (Netherlands)

    Veen, van der Roeland Cornelis Adriaan

    2016-01-01

    In this thesis, several questions related to drop impact and Taylor-Couette turbulence are answered. The deformation of a drop just before impact can cause a bubble to be entrapped. For many applications, such as inkjet printing, it is crucial to control the size of this entrapped bubble. To study t

  7. Youth Crime Drop. Report.

    Science.gov (United States)

    Butts, Jeffrey A.

    This report examines the recent drop in violent crime in the United States, discussing how much of the decrease seen between 1995-99 is attributable to juveniles (under age 18 years) and older youth (18-24 years). Analysis of current FBI arrest data indicates that not only did America's violent crime drop continue through 1999, but falling youth…

  8. Artisanal fishing net float loss and a proposal for a float design solution

    Directory of Open Access Journals (Sweden)

    Paulo de Tarso Chaves

    2016-03-01

    Full Text Available Abstract Plastic floats from fishing nets are commonly found washed up on beaches in southern Brazil. They are usually broken and show signs of having been repaired. Characteristics of floats and interviews with fishermen suggest two main causes of float loss. First, collisions between active gear, bottom trawl nets for shrimp, and passive gear, drift nets for fish, destroy nets and release fragments of them, including floats. Second, the difficulty with which floats are inserted on the float rope of the nets when they are used near the surface. Floats are inserted to replace damaged or lost floats, or they may be removed if it is desired that the nets be used in deeper waters. Floats may thus be poorly fixed to the cables and lost. Here a new float design that offers greater safety in use and for the replacement of floats is described and tested.

  9. Floating Cities, Islands and States

    CERN Document Server

    Bolonkin, Alexander

    2008-01-01

    Many small countries are in need of additional territory. They build landfills and expensive artificial islands. The ocean covers 71 per cent of the Earth surface. Those countries (or persons of wealth) starting the early colonization of the ocean may obtain advantages through additional territory or creating their own independent state. An old idea is building a big ship. The best solution to this problem, however, is the provision of floating cities, islands, and states. The author idea is to use for floating cities, islands, and states a cheap floating platform created from a natural ice field taken from the Arctic or Antarctic oceans. These cheap platforms protected by air-film (bottom and sides) and a conventional insulating cover (top) and having a cooling system can exist for an unlimited time. They can be increased in number or size at any time, float in warm oceans, travel to different continents and countries, serve as artificial airports, harbors and other marine improvements, as well as floating c...

  10. Ionic liquid-assisted liquid-phase microextraction based on the solidification of floating organic droplets combined with high performance liquid chromatography for the determination of benzoylurea insecticide in fruit juice.

    Science.gov (United States)

    Yang, Miyi; Zhang, Panjie; Hu, Lu; Lu, Runhua; Zhou, Wenfeng; Zhang, Sanbing; Gao, Haixiang

    2014-09-19

    A green, simple, and efficient method, ionic liquid-assisted liquid-liquid microextraction based on the solidification of floating organic droplets (ILSFOD-LLME) collected via a bell-shaped collection device (BSCD) coupled to high performance liquid chromatography with a variable-wavelength detector, was developed for the preconcentration and analysis of seven benzoylurea insecticides (BUs) in fruit juice. In the proposed method, the low-density solvent 1-dodecanol and the ionic liquid trihexyl(tetradecyl)phosphonium hexafluorophosphate ([P14, 6, 6, 6]PF6) were used as extractant. The extraction solvent droplet was easily collected and separated by the BSCD without centrifugation. The experimental parameters were optimized by the one-factor-at-a-time approach and were followed using an orthogonal array design. The results indicated the different effects of each parameter for extraction efficiency. Under the optimal conditions in the water model, the limits of detection for the analytes varied from 0.03 to 0.28μgL(-1). The enrichment factors ranged from 160 to 246. Linearities were achieved for hexaflumuron and flufenoxuron in the range of 0.5-500μgL(-1), for triflumuron, lufenuron and diafenthiuron in the range of 1-500μgL(-1), and for diflubenzuron and chlorfluazuron in the range of 5-500μgL(-1); the correlation coefficients for the BUs ranged from 0.9960 to 0.9990 with recoveries of 75.6-113.9%. Finally, the developed technique was successfully applied to real fruit juice with acceptable results. The relative standard deviations (RSDs) of the seven BUs at two spiked levels (50 and 200μgL(-1)) varied between 0.1% and 7.3%.

  11. Drop Tower Physics

    Science.gov (United States)

    Dittrich, William A. Toby

    2014-10-01

    The drop towers of yesteryear were used to make lead shot for muskets, as described in The Physics Teacher1 in April 2012. However, modern drop towers are essentially elevators designed so that the cable can "break" on demand, creating an environment with microgravity for a short period of time, currently up to nine seconds at the drop tower in Bremen, Germany. Using these drop towers, one can briefly investigate various physical systems operating in this near zero-g environment. The resulting "Drop Tower Physics" is a new and exciting way to challenge students with a physical example that requires solid knowledge of many basic physics principles, and it forces them to practice the scientific method. The question is, "How would a simple toy, like a pendulum, behave when it is suddenly exposed to a zero-g environment?" The student must then postulate a particular behavior, test the hypothesis against physical principles, and if the hypothesis conforms to these chosen physical laws, the student can formulate a final conclusion. At that point having access to a drop tower is very convenient, in that the student can then experimentally test his or her conclusion. The purpose of this discussion is to explain the response of these physical systems ("toys") when the transition is made to a zero-g environment and to provide video demonstrations of this behavior to support in-class discussions of Drop Tower Physics.

  12. Exploding Water Drops

    Science.gov (United States)

    Reich, Gary

    2016-01-01

    Water has the unusual property that it expands on freezing, so that ice has a specific gravity of 0.92 compared to 1.0 for liquid water. The most familiar demonstration of this property is ice cubes floating in a glass of water. A more dramatic demonstration is the ice bomb shown in Fig. 1. Here a cast iron flask is filled with water and tightly…

  13. Rainfall simulation experiments and Water Drop Penetration Time measurements shed light on the impact of water repellency on soils under organic farming management in Eastern Spain

    Science.gov (United States)

    Cerdà, Artemi; González, Óscar; León, Javier; Jordán, Antonio

    2015-04-01

    Water repellency is a well-know soil property since the research of professor Stefan Helmut Doerr recovered and powered the research developed by professor DeBano (Atanassova and Doerr, 2011; ; Jordán et al., 2011; Bodí et al., 2012; González Peñaloza et al., 2012 Bodí et al., 2013; García Moreno et al., 2013; Jordán et al., 2013; Badía-Villas et al., 2014; Jordán et al., 2013; Jiménez Morillo et al., 2015). However, little is known about the impact of water repellency in surface runoff generation, although usually is accepted that when more soil water repellent is a soil, higher will be the surface runoff discharge (Stoff et al., 2011; Madsen et al., 2011; León et al., 2013; Lozano et al., 2013; Mataix-Solera et al., 2013; Santos et al., 2015). And the impact of the water repellency and then the higher surface wash discharge can trigger high erosion rates (Kröpfl et al., 2013; Mandal and Sharda 2013; Zhao et al., 2013). However these relationships were not demonstrated as the most water repellent soils are the one with high organic contents, and those soils do not have soil losses, probably due to the high infiltration rates due to the macropore flow. Rainfall simulation experiments can shed light in the runoff generation mechanism as they can control the rainfall intensity (Bodí et al., 2012; Iserloh et al., 2012; Iserloh et al., 2013), and inform about the main mechanism of the soil erosion process Cerdà and Jurgensen, 2011; Daugherty et al., 2011; Podwojewski et al., 2011; Dunkerley, 2012; Garel et al., 2012; Jouquet et al., 2012; Kibet et al., 2013; Butzen et al., 2014; Ma et al., 2014; Martínez Murillo et al., 2013). To determine the relationship between surface runoff generated under simulated rainfall (Cerdà, 1988a; 1988b; Cerdà et al., 1998; Ziadat and Taimeh, 2013) with a small rainfall simulator (0.25 m2) and water repellency measurements with the Water Drop Penetration time methods were done (Bodí et al., 2012). The results show that

  14. The sessile drop method for immunohistochemical processing of unmounted sections of nervous tissue.

    Science.gov (United States)

    Nadelhaft, I

    1984-12-01

    A novel method for the immunohistochemical processing of free-floating tissue sections is described. Sections are immersed within drops of solution arranged on a hydrophobic surface. The procedure consists of sequentially suctioning away one fluid drop and replacing it by another, while the section remains in place. The technique permits easy testing of different antiserum dilutions, comparisons among different immunohistochemical protocols, and comparison of different antisera on serial tissue sections. Comparison is made to processing mounted sections.

  15. The Evaporation of Liquid Micro-Drops on the Heated Substrate

    Directory of Open Access Journals (Sweden)

    Semenov Andrey

    2017-01-01

    Full Text Available Evaporation of a heated sessile water micro-drop was studied experimentally at the substrate temperature and surrounding atmosphere from 30 to 50 °C. The studies were performed on the float glass substrate with aluminum nanocoating of optical quality. The research has shown that the specific rate of evaporation (mass loss per unit of the drop surface area increases with the decrease in droplet volume and at the last stage several times exceeds the initial value.

  16. Rain Drop Charge Sensor

    Science.gov (United States)

    S, Sreekanth T.

    begin{center} Large Large Rain Drop Charge Sensor Sreekanth T S*, Suby Symon*, G. Mohan Kumar (1) , S. Murali Das (2) *Atmospheric Sciences Division, Centre for Earth Science Studies, Thiruvananthapuram 695011 (1) D-330, Swathi Nagar, West Fort, Thiruvananthapuram 695023 (2) Kavyam, Manacaud, Thiruvananthapuram 695009 begin{center} ABSTRACT To study the inter-relations with precipitation electricity and precipitation microphysical parameters a rain drop charge sensor was designed and developed at CESS Electronics & Instrumentation Laboratory. Simultaneous measurement of electric charge and fall speed of rain drops could be done using this charge sensor. A cylindrical metal tube (sensor tube) of 30 cm length is placed inside another thick metal cover opened at top and bottom for electromagnetic shielding. Mouth of the sensor tube is exposed and bottom part is covered with metal net in the shielding cover. The instrument is designed in such a way that rain drops can pass only through unhindered inside the sensor tube. When electrically charged rain drops pass through the sensor tube, it is charged to the same magnitude of drop charge but with opposite polarity. The sensor tube is electrically connected the inverted input of a current to voltage converter operational amplifier using op-amp AD549. Since the sensor is electrically connected to the virtual ground of the op-amp, the charge flows to the ground and the generated current is converted to amplified voltage. This output voltage is recorded using a high frequency (1kHz) voltage recorder. From the recorded pulse, charge magnitude, polarity and fall speed of rain drop are calculated. From the fall speed drop diameter also can be calculated. The prototype is now under test running at CESS campus. As the magnitude of charge in rain drops is an indication of accumulated charge in clouds in lightning, this instrument has potential application in the field of risk and disaster management. By knowing the charge

  17. Floating treatment wetlands for domestic wastewater treatment.

    Science.gov (United States)

    Faulwetter, J L; Burr, M D; Cunningham, A B; Stewart, F M; Camper, A K; Stein, O R

    2011-01-01

    Floating islands are a form of treatment wetland characterized by a mat of synthetic matrix at the water surface into which macrophytes can be planted and through which water passes. We evaluated two matrix materials for treating domestic wastewater, recycled plastic and recycled carpet fibers, for chemical oxygen demand (COD) and nitrogen removal. These materials were compared to pea gravel or open water (control). Experiments were conducted in laboratory scale columns fed with synthetic wastewater containing COD, organic and inorganic nitrogen, and mineral salts. Columns were unplanted, naturally inoculated, and operated in batch mode with continuous recirculation and aeration. COD was efficiently removed in all systems examined (>90% removal). Ammonia was efficiently removed by nitrification. Removal of total dissolved N was ∼50% by day 28, by which time most remaining nitrogen was present as NO(3)-N. Complete removal of NO(3)-N by denitrification was accomplished by dosing columns with molasses. Microbial communities of interest were visualized with denaturing gradient gel electrophoresis (DGGE) by targeting specific functional genes. Shifts in the denitrifying community were observed post-molasses addition, when nitrate levels decreased. The conditioning time for reliable nitrification was determined to be approximately three months. These results suggest that floating treatment wetlands are a viable alternative for domestic wastewater treatment.

  18. Alcohol drops on miscible liquid: mixing or spreading?

    Science.gov (United States)

    Kim, Hyoungsoo; Muller, Koen; Shardt, Orest; Afkhami, Shahriar; Stone, Howard

    2016-11-01

    We studied how a sessile drop of alcohol behaves when placed on a fully miscible liquid. The dynamics of the subsequent mixing and spreading were captured by using a high-speed camera and investigated by varying parameters (e.g., surface tension, density, and viscosity). We observed that a deposited alcohol drop on a liquid bath remains as a floating lens shape, the alcohol liquid leaks out along the rim of the droplet, and it spreads axi-symmetrically along the bottom liquid interface. To visualize spreading and mixing features, we used time-resolved Particle Tacking Velocimetry and a Schlieren method. We observed a localized mixing flow at the rim of the floating droplet where the maximum flow speed is obtained, driven by a solutal Marangoni effect. Underneath the interface of the bath liquid, a viscous boundary layer develops while the alcohol liquid spreads along the radial direction. We also observed a finite quasi-steady interfacial flow velocity regime after the alcohol droplet touched the bottom liquid surface. In this regime, the flow speed linearly increases inside the floating lens, and outside the lens the flow speed decays along the r-direction with a power-law slope, Ur r - 1 / 2 . Physical arguments to support the observations will be discussed.

  19. Flattened-Top Domical Water Drops Formed through Self-Organization of Hydrophobin Membranes: A Structural and Mechanistic Study Using Atomic Force Microscopy.

    Science.gov (United States)

    Yamasaki, Ryota; Takatsuji, Yoshiyuki; Asakawa, Hitoshi; Fukuma, Takeshi; Haruyama, Tetsuya

    2016-01-26

    The Trichoderma reesei hydrophobin, HFBI, is a unique structural protein. This protein forms membranes by self-organization at air/water or water/solid interfaces. When HFBI forms a membrane at an air/water interface, the top of the water droplet is flattened. The mechanism underlying this phenomenon has not been explored. In this study, this unique phenomenon has been investigated. Self-organized HFBI membranes form a hexagonal structured membrane on the surface of water droplets; the structure was confirmed by atomic force microscopy (AFM) measurement. Assembled hexagons can form a planar sheet or a tube. Self-organized HFBI membranes on water droplets form a sheet with an array of hexagonal structures or a honeycomb structure. This membrane, with its arrayed hexagonal structures, has very high buckling strength. We hypothesized that the high buckling strength is the reason that water droplets containing HFBI form flattened domes. To test this hypothesis, the strength of the self-organized HFBI membranes was analyzed using AFM. The buckling strength of HFBI membranes was measured to be 66.9 mN/m. In contrast, the surface tension of water droplets containing dissolved HFBI is 42 mN/m. Thus, the buckling strength of a self-organized HFBI membrane is higher than the surface tension of water containing dissolved HFBI. This mechanistic study clarifies why the water droplets formed by self-organized HFBI membranes have a flattened top.

  20. Floating Charge%Floating Charge--浮动抵押

    Institute of Scientific and Technical Information of China (English)

    鲍为民

    2004-01-01

    "Floating Charge"来源于英美法系,它将担保设立在公司的全部财产之上(该担保甚至可及于公司未来之财产),在结晶前公司对财产享有处分权.通过介绍Floating Charge的创立和发展变化,从设定和实施两个方面详细考察了该制度的具体内涵.最后通过和大陆法系财团抵押制度的对比,提出应在我国引进浮动抵押,完善企业担保制度.

  1. Lambda-dropping

    DEFF Research Database (Denmark)

    Danvy, Olivier; Schultz, Ulrik Pagh

    1997-01-01

    ;rbæk's case study presented at PEPM '95, most polyvariant specializers for procedural programs operate on recursive equations. To this end, in a pre-processing phase, they lambda-lift source programs into recursive equations, As a result, residual programs are also expressed as recursive equations, often......Lambda-lifting a functional program transforms it into a set of recursive equations. We present the symmetric transformation: lambda-dropping. Lambda-dropping a set of recursive equations restores block structure and lexical scope.For lack of scope, recursive equations must carry around all...... with dozens of parameters, which most compilers do not handle efficiently. Lambda-dropping in a post-processing phase restores their block structure and lexical scope thereby significantly reducing both the compile time and the run time of residual programs....

  2. Impact of granular drops

    KAUST Repository

    Marston, J. O.

    2013-07-15

    We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

  3. Castaways can't be choosers - Homogenization of rafting assemblages on floating seaweeds

    Science.gov (United States)

    Gutow, Lars; Beermann, Jan; Buschbaum, Christian; Rivadeneira, Marcelo M.; Thiel, Martin

    2015-01-01

    After detachment from benthic habitats, the epibiont assemblages on floating seaweeds undergo substantial changes, but little is known regarding whether succession varies among different seaweed species. Given that floating algae may represent a limiting habitat in many regions, rafting organisms may be unselective and colonize any available seaweed patch at the sea surface. This process may homogenize rafting assemblages on different seaweed species, which our study examined by comparing the assemblages on benthic and floating individuals of the fucoid seaweeds Fucus vesiculosus and Sargassum muticum in the northern Wadden Sea (North Sea). Species richness was about twice as high on S. muticum as on F. vesiculosus, both on benthic and floating individuals. In both seaweed species benthic samples were more diverse than floating samples. However, the species composition differed significantly only between benthic thalli, but not between floating thalli of the two seaweed species. Separate analyses of sessile and mobile epibionts showed that the homogenization of rafting assemblages was mainly caused by mobile species. Among these, grazing isopods from the genus Idotea reached extraordinarily high densities on the floating samples from the northern Wadden Sea, suggesting that the availability of seaweed rafts was indeed limiting. Enhanced break-up of algal rafts associated with intense feeding by abundant herbivores might force rafters to recolonize benthic habitats. These colonization processes may enhance successful dispersal of rafting organisms and thereby contribute to population connectivity between sink populations in the Wadden Sea and source populations from up-current regions.

  4. The Clouds That Float By

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    AS I walk toward the autumn of my life, I begin to realize that everything in the world seems to have moved in a cycle, like the four seasons that continue to change and renew outside my window. But I am still seated in front of my window, observing the floating clouds at the ends of the earth. Some of them float from the future, some from the past. They join at the head and the tail of the universe; it is hard to tell the dragon’s head from the dragon’s tail. Things are always like this—the beginnings and the endings are sometimes interchangeable; the things that you think have gone by, have gone far away or completely vanished will suddenly appear before you like old acquaintances. Perhaps it might be the second generation accompanied by the shadows of the first.

  5. A CMOS floating point multiplier

    Science.gov (United States)

    Uya, M.; Kaneko, K.; Yasui, J.

    1984-10-01

    This paper describes a 32-bit CMOS floating point multiplier. The chip can perform 32-bit floating point multiplication (based on the proposed IEEE Standard format) and 24-bit fixed point multiplication (two's complement format) in less than 78.7 and 71.1 ns, respectively, and the typical power dissipation is 195 mW at 10 million operations per second. High-speed multiplication techniques - a modified Booth's allgorithm, a carry save adder scheme, a high-speed CMOS full adder, and a modified carry select adder - are used to achieve the above high performance. The chip is designed for compatibility with 16-bit microcomputer systems, and is fabricated in 2 micron n-well CMOS technology; it contains about 23000 transistors of 5.75 x 5.67 sq mm in size.

  6. Developments in Analytical Chemistry: Acoustically Levitated Drop Reactors for Enzyme Reaction Kinetics and Single-Walled Carbon Nanotube-Based Sensors for Detection of Toxic Organic Phosphonates

    Science.gov (United States)

    Field, Christopher Ryan

    2009-01-01

    Developments in analytical chemistry were made using acoustically levitated small volumes of liquid to study enzyme reaction kinetics and by detecting volatile organic compounds in the gas phase using single-walled carbon nanotubes. Experience gained in engineering, electronics, automation, and software development from the design and…

  7. Floating VAWT wind farm concepts

    OpenAIRE

    Schmidt Paulsen, Uwe; Friis Pedersen, Troels; Vita, Luca

    2008-01-01

    The report contains proposals and descriptions of VAWTs of 200kW, 1MW, 5MW and 25MW sizes in terms of dimensions, weights, loads, and power production. Additionally a proposal of the use of each of these sizes in a concept description for a 100MW wind farm. Manufacture, transportation, installation, maintenance and operation of VAWTs are considered briefly. A summary on advantages and disadvantages of floating VAWTs is given.

  8. Thickness monitor for floated sludge

    Energy Technology Data Exchange (ETDEWEB)

    Ricketts, J.; Grecu, G.M.

    1989-10-31

    This patent describes apparatus for determining the thickness of a layer of aerated sludge floating on a layer of a heavier liquid in a tank. It comprises: a frame means which can be positioned to extend vertically into the tank; horizontally-extending indicator means supported by and moveable vertically with respect to a portion of the frame means extending vertically into the tank. The indicator means being selectively positionable at the highest level of sludge in the tank; horizontally-extending lower base means attached to the frame means at or near the bottom thereof; horizontally-extending upper base means attached to the frame means at or near the top thereof; and a line carrying a float means. The line being movable secured at the upper base means and the lower base means. The float means being floatable on the liquid and including a horizontally-extending portion presenting an upwardly directed generally planar surface, which surface will be parallel to the interface of the sludge and liquid.

  9. Coalescence of sessile drops

    CERN Document Server

    Nikolayev, Vadim; Pomeau, Yves; Andrieu, Claire

    2016-01-01

    We present an experimental and theoretical description of the kinetics of coalescence of two water drops on a plane solid surface. The case of partial wetting is considered. The drops are in an atmosphere of nitrogen saturated with water where they grow by condensation and eventually touch each other and coalesce. A new convex composite drop is rapidly formed that then exponentially and slowly relaxes to an equilibrium hemispherical cap. The characteristic relaxation time is proportional to the drop radius R * at final equilibrium. This relaxation time appears to be nearly 10 7 times larger than the bulk capillary relaxation time t b = R * $\\eta$/$\\sigma$, where $\\sigma$ is the gas--liquid surface tension and $\\eta$ is the liquid shear viscosity. In order to explain this extremely large relaxation time, we consider a model that involves an Arrhenius kinetic factor resulting from a liquid--vapour phase change in the vicinity of the contact line. The model results in a large relaxation time of order t b exp(L/R...

  10. Sessile drops in microgravity

    CERN Document Server

    Sparavigna, Amelia Carolina

    2013-01-01

    Interfaces with a liquid are governing several phenomena. For instance, these interfaces are giving the shape of sessile droplets and rule the spread of liquids on surfaces. Here we analyze the shape of sessile axisymmetric drops and how it is depending on the gravity, obtaining results in agreement with experimental observations under conditions of microgravity.

  11. Vibrations of liquid drops in film boiling phenomena: the mathematical model

    CERN Document Server

    Casal, Pierre

    2008-01-01

    Flattened liquid drops poured on a very hot surface evaporate quite slowly and float on a film of their own vapour. In the cavities of a surface, an unusual type of vibrational motions occurs. Large vibrations take place and different forms of dynamic drops are possible. They form elliptic patterns with two lobes or hypotrochoid patterns with three lobes or more. The lobes are turning relatively to the hot surface. We present a model of vibrating motions of the drops. Frequencies of the vibrations are calculated regarding the number of lobes. The computations agree with experiments.

  12. 14 CFR 27.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 27.753 Section...

  13. 14 CFR 29.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 29.753 Section...

  14. Ultrasonic characterization of single drops of liquids

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, Dipen N. (Los Alamos, NM)

    1998-01-01

    Ultrasonic characterization of single drops of liquids. The present invention includes the use of two closely spaced transducers, or one transducer and a closely spaced reflector plate, to form an interferometer suitable for ultrasonic characterization of droplet-size and smaller samples without the need for a container. The droplet is held between the interferometer elements, whose distance apart may be adjusted, by surface tension. The surfaces of the interferometer elements may be readily cleansed by a stream of solvent followed by purified air when it is desired to change samples. A single drop of liquid is sufficient for high-quality measurement. Examples of samples which may be investigated using the apparatus and method of the present invention include biological specimens (tear drops; blood and other body fluid samples; samples from tumors, tissues, and organs; secretions from tissues and organs; snake and bee venom, etc.) for diagnostic evaluation, samples in forensic investigations, and detection of drugs in small quantities.

  15. Destabilising Pickering emulsions by drop flocculation and adhesion.

    Science.gov (United States)

    Whitby, Catherine P; Khairul Anwar, Hunainah; Hughes, James

    2016-03-01

    We have investigated how emulsions of water drops coated by organoclay particles destabilise in organic solvents. The drops destabilise and the emulsions undergo a fluid-solid transition if the particles are poorly wetted by the solvent. We show that the drops adhere together and form three-dimensional networks as the fraction of the poor-quality solvent in the mixture increases. Microscopic observations revealed that the drops coalesce into buckled, non-spherical shapes in mixtures rich in poor-quality solvent. A key finding is that destabilisation is favoured under conditions where the energy of adhesion between the particle layers coating drops is comparable to the energy required to detach the particles from the drops. Rupture of the interfacial layer produces particle flocs and uncoated, unstable water drops that settle out of the emulsion.

  16. Surface Tension Supported Floating of Heavy Objects: Why Elongated Bodies Float Better?

    CERN Document Server

    Bormashenko, Edward

    2015-01-01

    Floating of bodies heavier than the supporting liquid is discussed. Floating of cylindrical, ellipsoidal bodies and rectangular plates possessing lateral dimensions smaller than the capillary length is treated. It is demonstrated that more elongated bodies of a fixed volume are better supported by capillary forces, due to the increase in the perimeter of the triple line. Thus, floating of metallic needles obtains reasonable explanation.

  17. Coalescence of Liquid Drops

    CERN Document Server

    Eggers, J; Stone, H A; Eggers, Jens; Lister, John R.; Stone, Howard A.

    1999-01-01

    When two drops of radius $R$ touch, surface tension drives an initially singular motion which joins them into a bigger drop with smaller surface area. This motion is always viscously dominated at early times. We focus on the early-time behavior of the radius $\\rmn$ of the small bridge between the two drops. The flow is driven by a highly curved meniscus of length $2\\pi \\rmn$ and width $\\Delta\\ll\\rmn$ around the bridge, from which we conclude that the leading-order problem is asymptotically equivalent to its two-dimensional counterpart. An exact two-dimensional solution for the case of inviscid surroundings [Hopper, J. Fluid Mech. ${\\bf 213}$, 349 (1990)] shows that R)]$; and thus the same is true in three dimensions. The case of coalescence with an external viscous fluid is also studied in detail both analytically and numerically. A significantly different structure is found in which the outer fluid forms a toroidal bubble of radius $\\Delta \\propto \\rmn^{3/2}$ at the meniscus and $\\rmn \\sim (t\\gamma/4\\pi\\eta)...

  18. 14 CFR 27.751 - Main float buoyancy.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  19. 14 CFR 29.751 - Main float buoyancy.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  20. Hydroelasticity of a Floating Plate

    DEFF Research Database (Denmark)

    Chen, X.; Jensen, Jørgen Juncher; Cui, W.

    2003-01-01

    The membrane forces are included in the hydroelastic analysis of a floating plate undergoing large vertical deflections in regular monochromatic multidirectional waves. The first-order vertical displacements induced by the linear wave exciting forces are calculated by the mode expansion method...... in the frequency domain. The second-order vertical displacements induced by the membrane forces are calculated by the von Karman plate theory. The results show that the membrane contribution both in terms of the axial stresses and the effect on the bending stresses can be important...

  1. Floating patella associated with lymphoedema

    Science.gov (United States)

    Vun, Shen Hwa; Bayam, Levent; Drampalos, Efstathios; Jesry, Mohammed; Fadel, George

    2015-01-01

    Ipsilateral injury of more than one component of the knee extensor apparatus is rare. It is mostly associated with previous trauma, surgery, immunosuppression therapy and systemic disease. We present the first documented case of a spontaneous bifocal disruption of the knee extensor apparatus (i.e. floating patella) associated with lymphoedema. This case highlights the importance of considering lymphoedema as another risk factor for rupture of the knee extensor apparatus. It also highlights the importance of assessing all components of the knee extensor apparatus in patients presenting with acute knee injuries. PMID:25802253

  2. Investigation of drop coalescence via transient shape evolution: A sequential event based approach

    CERN Document Server

    Haldar, Krishnayan; Behera, Manas Ranjan; Chakraborty, Sudipto

    2015-01-01

    While a drop of liquid is placed on another liquid surface, two possible coalescence outcomes are observed. The parent drop bounces several times, floats and then disappears within the liquid pool without producing daughter droplets. This is called complete coalescence. Another outcome is the generation of secondary droplets from the primary drop itself. This is called partial coalescence. Repetitions of such phenomenon as a successive self-similar event is also known as coalescence cascade. In a nutshell, complete coalescence is governed strongly by swallowing mechanism whereas partial coalescence is attributed to slippage mechanism and solutal Marangoni flow. Here we use high speed camera and witness that water drop coalesces completely after impacting on pool of liquid whereas drop of non-ionic surfactant (TWEEN 20) coalesces partially. We also observe that number of daughter droplet generation is a strong function of surfactant concentration. Here we utilise the images to elaborately explain both the phen...

  3. Hydrodynamics of evaporating sessile drops

    CERN Document Server

    Barash, L Yu

    2010-01-01

    Several dynamical stages of the Marangoni convection of an evaporating sessile drop are obtained. We jointly take into account the hydrodynamics of an evaporating sessile drop, effects of the thermal conduction in the drop and the diffusion of vapor in air. The stages are characterized by different number of vortices in the drop and the spatial location of vortices. During the early stage the array of vortices arises near a surface of the drop and induces a non-monotonic spatial distribution of the temperature over the drop surface. The number of near-surface vortices in the drop is controlled by the Marangoni cell size, which is calculated similar to that given by Pearson for flat fluid layers. The number of vortices quickly decreases with time, resulting in three bulk vortices in the intermediate stage. The vortex structure finally evolves into the single convection vortex in the drop, existing during about 1/2 of the evaporation time.

  4. Leidenfrost Drop on a Step

    Science.gov (United States)

    Lagubeau, Guillaume; Le Merrer, Marie; Clanet, Christophe; Quere, David

    2008-11-01

    When deposited on a hot plate, a water droplet evaporates quickly. However, a vapor film appears under the drop above a critical temperature, called Leidenfrost temperature, which insulates the drop from its substrate. Linke & al (2006) reported a spontaneous movement of such a drop, when deposited on a ratchet. We study here the case of a flat substrate decorated with a single micrometric step. The drop is deposited on the lower part of the plate and pushed towards the step at small constant velocity. If the kinetic energy of the drop is sufficient, it can climb up the step. In that case, depending on the substrate temperature, the drop can either be decelerated or accelerated by the step. We try to understand the dynamics of these drops, especially the regime where they accelerate. Taking advantage of this phenomenon, we could then build a multiple-step setup, making it possible for a Leidenfrost drop to climb stairs.

  5. Floating liquid bridge charge dynamics

    Science.gov (United States)

    Teschke, Omar; Soares, David Mendez; Gomes, Whyllerson Evaristo; Valente Filho, Juracyr Ferraz

    2016-01-01

    The interaction of liquid with electric fields is investigated in a configuration where up to 13 kV are applied between electrodes resulting in a 106 V/m electric field in the capillaries and where there is the formation of a free-standing fluid bridge in the interelectrode gap. The Mott-Gurney equation was fitted to the measured ionization current vs applied voltage curve which indicates that the ionization rate at the high-voltage anode electrode dimethylsulfoxide (DMSO) interface and space charging in the interelectrode gap determine the floating liquid bridge current for a given cathode-to-anode voltage. Space charge effects were measured in the cathode becker and also at the liquid bridge since the ionized charges at the anode migrate to the bridge outer surface and decrease the interfacial tension from 43 mJ/m2 to 29 mJ/m2. Two distinct structural regions then form the bridge, a charged plastic (bulk modulus ˜100 MPa) conducting outer layer with a surface conductivity of ˜10-9 Ω-1, which shapes and supports the floating fluid structure, and an inner liquid cylinder, where DMSO molecules flow.

  6. Floating point numbers are real numbers

    OpenAIRE

    Mascarenhas, Walter F.

    2016-01-01

    Floating point arithmetic allows us to use a finite machine, the digital computer, to reach conclusions about models based on continuous mathematics. In this article we work in the other direction, that is, we present examples in which continuous mathematics leads to sharp, simple and new results about the evaluation of sums, square roots and dot products in floating point arithmetic.

  7. Towards sensible floating-point arithmetic

    Energy Technology Data Exchange (ETDEWEB)

    Cody, W.J.

    1980-01-01

    Efforts to promote the development of high-quality transportable numerical software show that few, if any, of the floating-point arithmetic systems in existing computers are completely satisfactory for serious numerical computation. Examination of the defects in these systems leads to specifications for a sensible floating-point system from a numerical analyst's viewpoint. 1 table.

  8. associated injuries and complications in floating knee management

    African Journals Online (AJOL)

    Traumatology Surgery, Cotonou Teaching Hospital, Republic of Bénin. Correspondence to: Dr. ... Keywords: Associated injuries, complications, Floating knee, Management .... floating knee: epidemiology, prognostic indicators. & outcome ...

  9. Superheated drop neutron spectrometer

    CERN Document Server

    Das, M; Roy, B; Roy, S C; Das, Mala

    2000-01-01

    Superheated drops are known to detect neutrons through the nucleation caused by the recoil nuclei produced by the interactions of neutrons with the atoms constituting the superheated liquid molecule. A novel method of finding the neutron energy from the temperature dependence response of SDD has been developed. From the equivalence between the dependence of threshold energy for nucleation on temperature of SDD and the dependence of dE/dx of the recoil ions with the energy of the neutron, a new method of finding the neutron energy spectrum of a polychromatic as well as monochromatic neutron source has been developed.

  10. Floating plant dominance as a stable state

    Science.gov (United States)

    Scheffer, Marten; Szabó, Sándor; Gragnani, Alessandra; van Nes, Egbert H.; Rinaldi, Sergio; Kautsky, Nils; Norberg, Jon; Roijackers, Rudi M. M.; Franken, Rob J. M.

    2003-01-01

    Invasion by mats of free-floating plants is among the most important threats to the functioning and biodiversity of freshwater ecosystems ranging from temperate ponds and ditches to tropical lakes. Dark, anoxic conditions under thick floating-plant cover leave little opportunity for animal or plant life, and they can have large negative impacts on fisheries and navigation in tropical lakes. Here, we demonstrate that floating-plant dominance can be a self-stabilizing ecosystem state, which may explain its notorious persistence in many situations. Our results, based on experiments, field data, and models, represent evidence for alternative domains of attraction in ecosystems. An implication of our findings is that nutrient enrichment reduces the resilience of freshwater systems against a shift to floating-plant dominance. On the other hand, our results also suggest that a single drastic harvest of floating plants can induce a permanent shift to an alternative state dominated by rooted, submerged growth forms. PMID:12634429

  11. Multiprocessing system for performing floating point arithmetic operations

    Energy Technology Data Exchange (ETDEWEB)

    Nguyenphu, M.; Thatcher, L.E.

    1990-10-02

    This patent describes a data processing system. It comprises: a fixed point arithmetic processor means for performing fixed point arithmetic operations and including control means for decoding a floating point arithmetic instruction specifying a floating point arithmetic operation, and an addressing means for computing addresses for floating point data for the floating point operation from a memory means. The memory means for storing data and including means for receiving the addresses from the fixed point arithmetic processor means and providing the floating point data to a floating point arithmetic processor means; and the floating point arithmetic processor means for performing floating point arithmetic operations and including control means for decoding the floating point instruction and performing the specified floating point arithmetic operation upon the floating point data from the memory means.

  12. Floating-point standards: Theory and practice

    Energy Technology Data Exchange (ETDEWEB)

    Cody, W.J.

    1987-01-01

    ANSI/IEEE Std 754-1985, the IEEE Standard for Binary Floating-Point Arithmetic, has now been joined by IEEE Std 854-1987, A Radix- Independent Standard for Floating-Point Arithmetic. These standards specify floating-point arithmetic systems that are intended to simplify the preparation of high-quality numerical software. The success of these standards hinges on how well they are implemented and how well they are supported by enhancements to algebraic languages. This paper briefly outlines the arithmetic systems specified by the standards, and discusses some existing implementations. 16 refs., 1 tab.

  13. Floating point arithmetic in future supercomputers

    Science.gov (United States)

    Bailey, David H.; Barton, John T.; Simon, Horst D.; Fouts, Martin J.

    1989-01-01

    Considerations in the floating-point design of a supercomputer are discussed. Particular attention is given to word size, hardware support for extended precision, format, and accuracy characteristics. These issues are discussed from the perspective of the Numerical Aerodynamic Simulation Systems Division at NASA Ames. The features believed to be most important for a future supercomputer floating-point design include: (1) a 64-bit IEEE floating-point format with 11 exponent bits, 52 mantissa bits, and one sign bit and (2) hardware support for reasonably fast double-precision arithmetic.

  14. New CFOA-based floating immittance emulators

    Science.gov (United States)

    Taher Abuelma'atti, Muhammad; Dhar, Sagar Kumar

    2016-12-01

    This paper presents four new topologies for emulating floating immittance functions. Each circuit uses two or three current-feedback operational-amplifiers (CFOAs) and three passive elements. The proposed topologies can emulate positive/negative lossless and lossy floating inductances, and positive/negative capacitance, resistance and inductance multipliers in addition to floating frequency-dependent positive and negative resistances. The functionality of the proposed circuits is verified using the Advanced Design System software and the AD844 CFOA. The simulation results are in excellent agreement with the theoretical calculations.

  15. Controlled decoherence of floating flux qubits

    Institute of Scientific and Technical Information of China (English)

    Ji Ying-Hua; Xu Lin

    2010-01-01

    In Born-Markov approximation, this paper calculates the energy relaxation time T1 and the decoherence time T2 of a floating flux qubit by solving the set of Bloch-Redfield equations. It shows that there are two main factors influencing the floating flux qubits: coupling capacitor in the circuit and the environment resistor. It also discusses how to improvethe quantum coherence time of a qubit. Through shunt connecting/series connecting inductive elements, an inductive environment resistor is obtained and further the reactance component of the environment resistor is improved, which is beneficial to the enhancement of decoherence time of floating flux qubits.

  16. Capillary floating and the billiard ball problem

    CERN Document Server

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cylinders that float in neutral equilibrium at any orientation with constant contact angles.

  17. A Novel Ideal Floating Inductor Using Translinear Conveyors

    Directory of Open Access Journals (Sweden)

    Iqbal A. Khan

    2003-01-01

    Full Text Available An ideal floating inductor circuit using translinear conveyors is introduced. The floating inductor simulator uses two translinear conveyors and a single capacitor in its realization. The circuit provides the current controlled ideal floating inductance without any component matching constraints. Simulation results on the floating inductor simulator verify the theory

  18. 14 CFR 23.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 23.753 Section 23.753... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Floats and Hulls § 23.753 Main float design. Each seaplane main float must meet the requirements of § 23.521. ...

  19. Floating microparticles based on low density foam powder.

    Science.gov (United States)

    Streubel, A; Siepmann, J; Bodmeier, R

    2002-07-25

    The aim of this study was to develop a novel multiparticulate gastroretentive drug delivery system and to demonstrate its performance in vitro. Floating microparticles consisting of (i) polypropylene foam powder; (ii) verapamil HCl as model drug; and (iii) Eudragit RS, ethylcellulose (EC) or polymethyl methacrylate (PMMA) as polymers were prepared with an O/W solvent evaporation method. The effect of various formulation and processing parameters on the internal and external particle morphology, drug loading, in vitro floating behavior, in vitro drug release kinetics, particle size distribution and physical state of the incorporated drug was studied. The microparticles were irregular in shape and highly porous. The drug encapsulation efficiency was high and almost independent of the theoretical loading. Encapsulation efficiencies close to 100% could be achieved by varying either the ratio 'amount of ingredients: volume of the organic phase' or the relative amount of polymer. In all cases, good in vitro floating behavior was observed. The release rate increased with increasing drug loading and with decreasing polymer amounts. The type of polymer significantly affected the drug release rate, which increased in the following rank order: PMMA

  20. Investigations of levitated helium drops

    Science.gov (United States)

    Whitaker, Dwight Lawrence

    1999-11-01

    We report on the development of two systems capable of levitating drops of liquid helium. Helium drops of ˜20 mum have been levitated with the radiation pressure from two counter-propagating Nd:YAG laser beams. Drops are produced with a submerged piezoelectric transducer, and could be held for up to three minutes in our optical trap. Calculations show that Brillouin and Raman scattering of the laser light in the liquid helium produces a negligible rate of evaporation of the drop. Evaporation caused by the enhanced vapor pressure of the curved drop surfaces appears to be a significant effect limiting the drop lifetimes. Helium drops as large as 2 cm in diameter have been suspended in the earth's gravitational field with a magnetic field. A commercial superconducting solenoid provides the necessary field, field-gradient product required to levitate the drops. Drops are cooled to 0.5 K with a helium-3 refrigerator, and can be held in the trap indefinitely. We have found that when two or more drops are levitated in the same magnetic trap, the drops often remain in a state of apparent contact without coalescing. This effect is a result of the evaporation of liquid from between the two drops, and is found to occur only for normal fluid drops. We can induce shape oscillations in charged, levitated drops with an applied ac electric field. We have measured the resonance frequencies and damping rates for the l = 2 mode of oscillation as function of temperature. We have also developed a theory to describe the small amplitude shape oscillations of a He II drop surrounded by its saturated vapor. In our theory, we have considered two sets of boundary conditions---one where the drop does not evaporate and another in which the liquid and vapor are in thermodynamic equilibrium. We have found that both solutions give a frequency that agrees well with experiment, but that the data for the damping rate agree better with the solution without evaporation.

  1. Shipwreck! The floating inferno: Yarmouth Castle

    National Research Council Canada - National Science Library

    Armstrong, J; Ramer, H

    1998-01-01

    The Yarmouth Castle embarked on an overnight trip from Miami to the Bahamas every weekend - until November, 1965, when this midnight cruise to paradise became a floating inferno that left 87 passengers dead...

  2. Physical model tests for floating wind turbines

    DEFF Research Database (Denmark)

    Bredmose, Henrik; Mikkelsen, Robert Flemming; Borg, Michael

    Floating offshore wind turbines are relevant at sites where the depth is too large for the installation of a bottom fixed substructure. While 3200 bottom fixed offshore turbines has been installed in Europe (EWEA 2016), only a handful of floating wind turbines exist worldwide and it is still...... an open question which floater concept is the most economically feasible. The design of the floaters for the floating turbines relies heavily on numerical modelling. While several coupled models exist, data sets for their validation are scarce. Validation, however, is important since the turbine behaviour...... is complex due to the combined actions of aero- and hydrodynamic loads, mooring loads and blade pitch control. The present talk outlines two recent test campaigns with a floating wind turbine in waves and wind. Two floater were tested, a compact TLP floater designed at DTU (Bredmose et al 2015, Pegalajar...

  3. The floating city as an ecosystem

    NARCIS (Netherlands)

    Van Uffelen, C., Rentmeester, S.

    2015-01-01

    Floating construction: several municipalities in the Netherlands are working with it on a small scale. TU Delft alumnus Rutger de Graaf of the YesDelft company DeltaSync would like to speed things up with his Blue Revolution.

  4. Video-OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data release contains digital video files from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site...

  5. Genetics Home Reference: Floating-Harbor syndrome

    Science.gov (United States)

    ... child may have bones more typical of a child of 2. However, bone age is usually normal by age 6 to 12. Delay in speech development (expressive language delay) may be severe in Floating-Harbor syndrome , ...

  6. Inverted Cheerios effect: Liquid drops attract or repel by elasto-capillarity

    CERN Document Server

    Karpitschka, S; Lubbers, L A; Weijs, J H; Botto, L; Das, S; Andreotti, B; Snoeijer, J H

    2016-01-01

    Solid particles floating at a liquid interface exhibit a long-ranged attraction mediated by surface tension. In the absence of bulk elasticity, this is the dominant lateral interaction of mechanical origin. Here we show that an analogous long-range interaction occurs between adjacent droplets on solid substrates, which crucially relies on a combination of capillarity and bulk elasticity. We experimentally observe the interaction between droplets on soft gels and provide a theoretical framework that quantitatively predicts the migration velocity of the droplets. Remarkably, we find that while on thick substrates the interaction is purely attractive and leads to drop-drop coalescence, for relatively thin substrates a short-range repulsion occurs which prevents the two drops from coming into direct contact. This versatile, new interaction is the liquid-on-solid analogue of the "Cheerios effect". The effect will strongly influence the condensation and coarsening of drop soft polymer films, and has potential impli...

  7. Genetic Algorithms, Floating Point Numbers and Applications

    Science.gov (United States)

    Hardy, Yorick; Steeb, Willi-Hans; Stoop, Ruedi

    The core in most genetic algorithms is the bitwise manipulations of bit strings. We show that one can directly manipulate the bits in floating point numbers. This means the main bitwise operations in genetic algorithm mutations and crossings are directly done inside the floating point number. Thus the interval under consideration does not need to be known in advance. For applications, we consider the roots of polynomials and finding solutions of linear equations.

  8. Verified Compilation of Floating-Point Computations

    OpenAIRE

    Boldo, Sylvie; Jourdan, Jacques-Henri; Leroy, Xavier; Melquiond, Guillaume

    2015-01-01

    International audience; Floating-point arithmetic is known to be tricky: roundings, formats, exceptional values. The IEEE-754 standard was a push towards straightening the field and made formal reasoning about floating-point computations easier and flourishing. Unfortunately, this is not sufficient to guarantee the final result of a program, as several other actors are involved: programming language, compiler, architecture. The CompCert formally-verified compiler provides a solution to this p...

  9. Travel Time Estimation Using Floating Car Data

    CERN Document Server

    Sevlian, Raffi

    2010-01-01

    This report explores the use of machine learning techniques to accurately predict travel times in city streets and highways using floating car data (location information of user vehicles on a road network). The aim of this report is twofold, first we present a general architecture of solving this problem, then present and evaluate few techniques on real floating car data gathered over a month on a 5 Km highway in New Delhi.

  10. Capillary floating and the billiard ball problem

    OpenAIRE

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cyli...

  11. Floating wetlands for urban stormwater treatment

    OpenAIRE

    Wang, Chih-Yu

    2013-01-01

    A floating treatment wetland (FTW) is an ecological approach which seeks to reduce point and nonpoint source pollution by installing substrate rooted plants grown on floating mats in open waters. While relatively novel, FTW use is increasing. A review of literature identified several research gaps, including: (1) assessments of the treatment performance of FTWs; (2) evaluations of FTWs in the U.S., particularly within wet ponds that receive urban runoff; and (3) plant temporal nutrient distri...

  12. Gas Pressure-Drop Experiment

    Science.gov (United States)

    Luyben, William L.; Tuzla, Kemal

    2010-01-01

    Most chemical engineering undergraduate laboratories have fluid mechanics experiments in which pressure drops through pipes are measured over a range of Reynolds numbers. The standard fluid is liquid water, which is essentially incompressible. Since density is constant, pressure drop does not depend on the pressure in the pipe. In addition, flow…

  13. Pressure drop in contraction flow

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz

    This note is a supplement to Dynamic of Polymeric Liquids (DPL) page 178. DPL gives an equation for the pressure drop in a tapered (and circular) contraction, valid only at low angles. Here the general definition of contraction flow (the Bagley correction) and a more general method to find...... the pressure drop in a contraction are given....

  14. Insights from the pollination drop proteome and the ovule transcriptome of Cephalotaxus at the time of pollination drop production.

    Science.gov (United States)

    Pirone-Davies, Cary; Prior, Natalie; von Aderkas, Patrick; Smith, Derek; Hardie, Darryl; Friedman, William E; Mathews, Sarah

    2016-05-01

    Many gymnosperms produce an ovular secretion, the pollination drop, during reproduction. The drops serve as a landing site for pollen, but also contain a suite of ions and organic compounds, including proteins, that suggests diverse roles for the drop during pollination. Proteins in the drops of species of Chamaecyparis, Juniperus, Taxus, Pseudotsuga, Ephedra and Welwitschia are thought to function in the conversion of sugars, defence against pathogens, and pollen growth and development. To better understand gymnosperm pollination biology, the pollination drop proteomes of pollination drops from two species of Cephalotaxus have been characterized and an ovular transcriptome for C. sinensis has been assembled. Mass spectrometry was used to identify proteins in the pollination drops of Cephalotaxus sinensis and C. koreana RNA-sequencing (RNA-Seq) was employed to assemble a transcriptome and identify transcripts present in the ovules of C. sinensis at the time of pollination drop production. About 30 proteins were detected in the pollination drops of both species. Many of these have been detected in the drops of other gymnosperms and probably function in defence, polysaccharide metabolism and pollen tube growth. Other proteins appear to be unique to Cephalotaxus, and their putative functions include starch and callose degradation, among others. Together, the proteins appear either to have been secreted into the drop or to occur there due to breakdown of ovular cells during drop production. Ovular transcripts represent a wide range of gene ontology categories, and some may be involved in drop formation, ovule development and pollen-ovule interactions. The proteome of Cephalotaxus pollination drops shares a number of components with those of other conifers and gnetophytes, including proteins for defence such as chitinases and for carbohydrate modification such as β-galactosidase. Proteins likely to be of intracellular origin, however, form a larger component of drops

  15. Optimized design of 4H-SiC floating junction power Schottky barrier diodes

    Institute of Scientific and Technical Information of China (English)

    Pu Hongbin; Cao Lin; Chen Zhiming; Ren Jie

    2009-01-01

    SiC floating junction Schottky barrier diodes were simulated with software MEDICI 4.0 and their device structures were optimized based on forward and reverse electrical characteristics.Compared with the conventional power Schottky barrier diode,the device structure is featured by a highly doped drift region and embedded floating junction region,which can ensure high breakdown voltage while keeping lower specific on-state resistance,solved the contradiction between forward voltage drop and breakdown voltage.The simulation results show that with optimized structure parameter,the breakdown voltage Can reach 4 kV and the specific on-resistance is 8.3 mΩ·cm2.

  16. Water flow and solute transport in floating fen root mats

    Science.gov (United States)

    Stofberg, Sija F.; EATM van der Zee, Sjoerd

    2015-04-01

    Floating fens are valuable wetlands, found in North-Western Europe, that are formed by floating root mats when old turf ponds are colonized by plants. These terrestrialization ecosystems are known for their biodiversity and the presence of rare plant species, and the root mats reveal different vegetation zones at a small scale. The vegetation zones are a result of strong gradients in abiotic conditions, including groundwater dynamics, nutrients and pH. To prevent irreversible drought effects such as land subsidence and mineralization of peat, water management involves import of water from elsewhere to maintain constant surface water levels. Imported water may have elevated levels of salinity during dry summers, and salt exposure may threaten the vegetation. To assess the risk of exposure of the rare plant species to salinity, the hydrology of such root mats must be understood. Physical properties of root mats have scarcely been investigated. We have measured soil characteristics, hydraulic conductivity, vertical root mat movement and groundwater dynamics in a floating root mat in the nature reserve Nieuwkoopse Plassen, in the Netherlands. The root mat mostly consists of roots and organic material, in which the soil has a high saturated water content, and strongly varies in its stage of decomposition. We have found a distinct negative correlation between degree of decomposition and hydraulic conductivity, similar to observations for bogs in the literature. Our results show that the relatively young, thin edge of the root mat that colonizes the surface water has a high hydraulic conductivity and floats in the surface water, resulting in very small groundwater fluctuations within the root mat. The older part of the root mat, that is connected to the deeper peat layers is hydrologically more isolated and the material has a lower conductivity. Here, the groundwater fluctuates strongly with atmospheric forcing. The zones of hydraulic properties and vegetation, appear to

  17. A novel Caulimovirus associated with a complete fruit drop symptom in ‘Bluecrop’ blueberry

    Science.gov (United States)

    Here we describe the nucleotide sequence and genome organization of a novel virus in the family Caulimoviridae from ‘Bluecrop’ blueberry plants that exhibited fruit drop symptoms. The virus is tentatively named Blueberry fruit drop associated virus (BFDaV). Blueberry fruit drop disease (BFDD) was fi...

  18. Liquid drops on soft solids

    Science.gov (United States)

    Lubbers, Luuk A.; Weijs, Joost H.; Das, Siddhartha; Botto, Lorenzo; Andreotti, Bruno; Snoeijer, Jacco H.

    2014-03-01

    A sessile drop can elastically deform a substrate by the action of capillary forces. The typical size of the deformation is given by the ratio of surface tension and the elastic modulus, γ / E , which can reach up to 10-100 microns for soft elastomers. In this talk we theoretically show that the contact angles of drops on such a surface exhibit two transitions when increasing γ / E : (i) the microsocopic geometry of the contact line first develops a Neumann-like cusp when γ / E is of the order of few nanometers, (ii) the macroscopic angle of the drop is altered only when γ / E reaches the size of the drop. Using the same framework we then show that two neighboring drops exhibit an effective interaction, mediated by the deformation of the elastic medium. This is in analogy to the well-known Cheerios effect, where small particles at a liquid interface attract each other due to the meniscus deformations. Here we reveal the nature of drop-drop interactions on a soft substrate by combining numerical and analytical calculations.

  19. Liquid drops attract or repel by the inverted Cheerios effect

    Science.gov (United States)

    Karpitschka, Stefan; Pandey, Anupam; Lubbers, Luuk A.; Weijs, Joost H.; Botto, Lorenzo; Das, Siddhartha; Andreotti, Bruno; Snoeijer, Jacco H.

    2016-01-01

    Solid particles floating at a liquid interface exhibit a long-ranged attraction mediated by surface tension. In the absence of bulk elasticity, this is the dominant lateral interaction of mechanical origin. Here, we show that an analogous long-range interaction occurs between adjacent droplets on solid substrates, which crucially relies on a combination of capillarity and bulk elasticity. We experimentally observe the interaction between droplets on soft gels and provide a theoretical framework that quantitatively predicts the interaction force between the droplets. Remarkably, we find that, although on thick substrates the interaction is purely attractive and leads to drop–drop coalescence, for relatively thin substrates a short-range repulsion occurs, which prevents the two drops from coming into direct contact. This versatile interaction is the liquid-on-solid analog of the “Cheerios effect.” The effect will strongly influence the condensation and coarsening of drops on soft polymer films, and has potential implications for colloidal assembly and mechanobiology. PMID:27298348

  20. Excited Sessile Drops Perform Harmonically

    CERN Document Server

    Chang, Chun-Ti; Steen, Paul H

    2013-01-01

    In our fluid dynamics video, we demonstrate our method of visualizing and identifying various mode shapes of mechanically oscillated sessile drops. By placing metal mesh under an oscillating drop and projecting light from below, the drop's shape is visualized by the visually deformed mesh pattern seen in the top view. The observed modes are subsequently identified by their number of layers and sectors. An alternative identification associates them with spherical harmonics, as demonstrated in the tutorial. Clips of various observed modes are presented, followed by a 10-second quiz of mode identification.

  1. Dynamically Reconfigurable Processor for Floating Point Arithmetic

    Directory of Open Access Journals (Sweden)

    S. Anbumani,

    2014-01-01

    Full Text Available Recently, development of embedded processors is toward miniaturization and energy saving for ecology. On the other hand, high performance arithmetic circuits are required in a lot of application in science and technology. Dynamically reconfigurable processors have been developed to meet these requests. They can change circuit configuration according to instructions in program instantly during operations.This paper describes, a dynamically reconfigurable circuit for floating-point arithmetic is proposed. The arithmetic circuit consists of two single precision floating-point arithmetic circuits. It performs double precision floating-point arithmetic by reconfiguration. Dynamic reconfiguration changes circuit construction at one clock cycle during operation without stopping circuits. It enables reconfiguration of circuits in a few nano seconds. The proposed circuit is reconfigured in two modes. In first mode it performs one double precision floating-point arithmetic or else the circuit will perform two parallel operations of single precision floating-point arithmetic. The new system design reduces implementation area by reconfiguring common parts of each operation. It also increases the processing speed with a very little number of clocks.

  2. On the dynamics of floating structures

    CERN Document Server

    Lannes, David

    2016-01-01

    This paper addresses the floating body problem which consists in studying the interaction of surface water waves with a floating body. We propose a new formulation of the water waves problem that can easily be generalized in order to take into account the presence of a floating body. The resulting equations have a compressible-incompressible structure in which the interior pressure exerted by the fluid on the floating body is a Lagrange multiplier that can be determined through the resolution of a $d$-dimensional elliptic equation, where $d$ is the horizontal dimension. In the case where the object is freely floating, we decompose the hydrodynamic force and torque exerted by the fluid on the solid in order to exhibit an added mass effect; in the one dimensional case $d=1$, the computations can be carried out explicitly. We also show that this approach in which the interior pressure appears as a Lagrange multiplier can be implemented on reduced asymptotic models such as the nonlinear shallow water equations an...

  3. Formulation and optimization of carbamazepine floating tablets

    Directory of Open Access Journals (Sweden)

    Patel D

    2007-01-01

    Full Text Available Floating tablets of carbamazepine were developed using melt granulation technique. Bees wax was used as a hydrophobic meltable material. Hydroxypropylmethylcellulose, sodium bicarbonate and ethyl cellulose were used as matrixing agent, gas-generating agent and floating enhancer, respectively. The tablets were evaluated for in vitro buoyancy and dissolution studies. A simplex lattice design was applied to investigate the combined effect of 3 formulation variables i.e. amount of hydroxypropyl methylcellulose ( X 1 , ethyl cellulose ( X 2 and sodium bicarbonate ( X 3 . The floating lag time (F lag , time required for 50% (t 50 and 80% drug dissolution (t 80 were taken as responses. Results of multiple regression analysis indicated that, low level of X 1 and X 2 , and high level of X 3 should be used to manufacture the tablet formulation with desired in vitro floating time and dissolution. Formulations developed using simplex lattice design were fitted to various kinetic models for drug release. Formulation S3 was selected as a promising formulation and was found stable at 40 o and 75% relative humidity for 3 months. Present study demonstrates the use of simplex lattice design in the development of floating tablets with minimum experimentation.

  4. Drop spreading with random viscosity

    CERN Document Server

    Xu, Feng

    2016-01-01

    We examine theoretically the spreading of a viscous liquid drop over a thin film of uniform thickness, assuming the liquid's viscosity is regulated by the concentration of a solute that is carried passively by the spreading flow. The solute is assumed to be initially heterogeneous, having a spatial distribution with prescribed statistical features. To examine how this variability influences the drop's motion, we investigate spreading in a planar geometry using lubrication theory, combining numerical simulations with asymptotic analysis. We assume diffusion is sufficient to suppress solute concentration gradients across but not along the film. The solute field beneath the bulk of the drop is stretched by the spreading flow, such that the initial solute concentration immediately behind the drop's effective contact lines has a long-lived influence on the spreading rate. Over long periods, solute swept up from the precursor film accumulates in a short region behind the contact line, allowing patches of elevated v...

  5. 45-FOOT HIGH DROP TOWER

    Data.gov (United States)

    Federal Laboratory Consortium — The Drop Tower is used to simulate and measure the impact shocks that are exerted on parachute loads when they hit the ground. It is also used for HSL static lift to...

  6. A Validated All-Pressure Fluid Drop Model and Lewis Number Effects for a Binary Mixture

    Science.gov (United States)

    Harstad, K.; Bellan, J.

    1999-01-01

    The differences between subcritical liquid drop and supercritical fluid drop behavior are discussed. Under subcritical, evaporative high emission rate conditions, a film layer is present in the inner part of the drop surface which contributes to the unique determination of the boundary conditions; it is this film layer which contributes to the solution's convective-diffusive character. In contrast, under supercritical condition as the boundary conditions contain a degree of arbitrariness due to the absence of a surface, and the solution has then a purely diffusive character. Results from simulations of a free fluid drop under no-gravity conditions are compared to microgravity experimental data from suspended, large drop experiments at high, low and intermediary temperatures and in a range of pressures encompassing the sub-and supercritical regime. Despite the difference between the conditions of the simulations and experiments (suspension vs. free floating), the time rate of variation of the drop diameter square is remarkably well predicted in the linear curve regime. The drop diameter is determined in the simulations from the location of the maximum density gradient, and agrees well with the data. It is also shown that the classical calculation of the Lewis number gives qualitatively erroneous results at supercritical conditions, but that an effective Lewis number previously defined gives qualitatively correct estimates of the length scales for heat and mass transfer at all pressures.

  7. Economic Floating Waste Detectionfor Surface Cleaning Robots

    Directory of Open Access Journals (Sweden)

    Sumroengrit Jakkrit

    2017-01-01

    Full Text Available Removing waste out of water surface is a routine task and can be operated by using autonomous surface cleaning robots. This paper presents amethodoflaser-based floating waste detection for surface robot guidance when waste positions are unknown beforehand. Basing on concept of refraction and reflection of laser ray, the proposed laser-based technique is proven to be applicable on floating waste detection. The economic waste detector is constructed and mounted on the robot. Five DOF equations of motion are formulated for calculation of waste position incorporating distance measured by the laser and also the robot motion caused by external wind force as well as water surface tension. Experiments were conducted on a pond with calm water and results show that the presented economic waste detection successfully identify and locate position of plastic bottles floating on water surface within the range of 5 meters.

  8. Block floating point for radar data

    DEFF Research Database (Denmark)

    Christensen, Erik Lintz

    1999-01-01

    Integer, floating point, and block floating point (BFP) data formats are analyzed and compared in order to establish the mathematical tools for selection of an optimal format which fulfils the demands of high resolution radar (SAR) data to large dynamic range and adequate S/N. The analysis takes...... quantization noise and saturation distortion into account and concludes that it is preferred to use small blocks and a (new) modified BFP format applying fractional exponents. Data from the EMISAR radar system are applied to illustrate the merits of the different schemes....

  9. FLOAT2 WP4: Development of Materials

    DEFF Research Database (Denmark)

    Esteves, Luis Pedro; Aarup, Bendt

    This report refers to complementary material testing to support the design and production of UHPC floaters for installation in the Wave Star Machine under FLOAT2 project. The main objective of WP4 is the characterization of mechanical properties of fiber-reinforced UHPC.......This report refers to complementary material testing to support the design and production of UHPC floaters for installation in the Wave Star Machine under FLOAT2 project. The main objective of WP4 is the characterization of mechanical properties of fiber-reinforced UHPC....

  10. Improvements in floating point addition/subtraction operations

    Energy Technology Data Exchange (ETDEWEB)

    Farmwald, P.M.

    1984-02-24

    Apparatus is described for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  11. Floating Inductance and FDNR Using Positive Polarity Current Conveyors

    OpenAIRE

    Pal, K.

    2004-01-01

    A generalized circuit based on five positive polarity second-generation current conveyors is introduced. The circuit simulates a floating inductance, capacitor floatation circuit and floating fdnr. All these circuits use grounded capacitors.

  12. Floating Inductance and FDNR Using Positive Polarity Current Conveyors

    Directory of Open Access Journals (Sweden)

    K. Pal

    2004-01-01

    Full Text Available A generalized circuit based on five positive polarity second-generation current conveyors is introduced. The circuit simulates a floating inductance, capacitor floatation circuit and floating fdnr. All these circuits use grounded capacitors.

  13. Argo Float Data from the APDRC DAPPER Server

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The floats are designed to drift at a fixed pressure (usually 1000 dbar) for 10 days. After this period, the floats move to a profiling pressure (usually between...

  14. Worm-like instability of a vibrated sessile drop

    CERN Document Server

    Hemmerle, Arnaud; Bergeron, Vance; Charitat, Thierry; Farago, Jean

    2016-01-01

    We study the effects of vertical sinusoidal vibrations on a liquid droplet with a low surface tension (ethanol) deposited on a solid substrate. In a precise range of amplitudes and frequencies, the drop exhibits a dramatic worm-like shape instability with a strong symmetry breaking, comparable to the one observed by Pucci et al. (Phys. Rev. Lett., 106 (2011) 024503) on a vibrated floating lens. However, the geometry of our system is much simpler since it does not involve the oscillation and deformation of a liquid-liquid-air contact line. We show that the Faraday waves appearing on the surface of the droplet control its shape and we draw a systematic phase diagram of the instability. A simple theoretical model allows us to derive a relation between the elongation of the droplet and the amplitude of the Faraday wave, in good agreement with measurements of both quantities.

  15. Validation of salinity data from ARGO floats: Comparison between the older ARGO floats and that of later deployments

    Digital Repository Service at National Institute of Oceanography (India)

    Youn, Y.-H.; Lee, H.; Chang, Y.-S.; Pankajakshan, T.

    Continued observation of ARGO floats or years (about 4 years) makes the conductivity sensor more vulnerable to fouling by marine life and associated drift in salinity measurements. In this paper, we address this issue by making use of floats...

  16. 14 CFR 29.757 - Hull and auxiliary float strength.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and auxiliary float strength. 29.757 Section 29.757 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... § 29.757 Hull and auxiliary float strength. The hull, and auxiliary floats if used, must withstand...

  17. 14 CFR 25.753 - Main float design.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 25.753 Section 25.753 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.753 Main float design...

  18. Many Drops Make a Lake

    Directory of Open Access Journals (Sweden)

    Chaitanya S. Mudgal

    2014-03-01

    Full Text Available The desire and drive for excellence in any endeavor in life requires an effort from the individual; in addition it requires a constellation of features around such individuals that help them to become successful. For surgeons, it is the operating room staff, the administrative and medical assistants and our residents and fellows. However, perhaps the most important contribution to a physician’s success, are his or her patients.  As I get older, I find myself doing and saying things that seemingly, just a few years ago I used to hear my own teachers say and do. And then with some wry amusement, I wonder...when did this change happen in me? Change is inevitable, progressive and relentless. However, what remains constant is the compassion and care that our patients need and deserve. In this day and age of advancing technology and minimally invasive surgery, sometimes we surgeons forget that our patients are human beings. Our patients are the ones who teach us the most. It is therefore incumbent upon us to treat them with the greatest amount of dignity and respect that is possible. Sir Isaac Newton had said “If I have seen further, it is by standing on the shoulders of giants”. My fervent advice to all my trainees is to recognize and acknowledge their own personal giants early and often, for it is their shoulders upon which they will stand to see further. First and foremost among my personal giants are my patients, and then my parents, my teachers, my wife and children. It is they who have collectively helped me to achieve my personal goals.  It is imperative that as clinicians and scientists we strive for excellence, and also continuously remember to be humble. Drs. Ebrahimzadeh, Kachooei and their team embody this very principle. Their efforts in getting this journal organized and come to fruition are enormous. Yet, it is the result of a collective effort to achieve excellence for the ongoing care of our patients; the desire to achieve

  19. 40 CFR 65.45 - External floating roof converted into an internal floating roof.

    Science.gov (United States)

    2010-07-01

    ... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Storage Vessels § 65.45... control storage vessel regulated material emissions by using an external floating roof converted into an...

  20. Drop Spreading with Random Viscosity

    Science.gov (United States)

    Xu, Feng; Jensen, Oliver

    2016-11-01

    Airway mucus acts as a barrier to protect the lung. However as a biological material, its physical properties are known imperfectly and can be spatially heterogeneous. In this study we assess the impact of these uncertainties on the rate of spreading of a drop (representing an inhaled aerosol) over a mucus film. We model the film as Newtonian, having a viscosity that depends linearly on the concentration of a passive solute (a crude proxy for mucin proteins). Given an initial random solute (and hence viscosity) distribution, described as a Gaussian random field with a given correlation structure, we seek to quantify the uncertainties in outcomes as the drop spreads. Using lubrication theory, we describe the spreading of the drop in terms of a system of coupled nonlinear PDEs governing the evolution of film height and the vertically-averaged solute concentration. We perform Monte Carlo simulations to predict the variability in the drop centre location and width (1D) or area (2D). We show how simulation results are well described (at much lower computational cost) by a low-order model using a weak disorder expansion. Our results show for example how variability in the drop location is a non-monotonic function of the solute correlation length increases. Engineering and Physical Sciences Research Council.

  1. PLM floating-point interface program

    Energy Technology Data Exchange (ETDEWEB)

    Paoni, C.; Maples, M.

    1976-03-03

    A major failing of Intel's PLM language is its inability to handle scientific notation (floating-point) calculations. An interface program that allows PLM to perform such calculations is described. A comparison of this modified PLM with an assembly language program has shown PLM's effectiveness in reducing the cost of a project. (auth)

  2. Floating RC Networks Using Current Conveyors

    OpenAIRE

    Zeman, V; J. Cajka; Vrba, K.

    1996-01-01

    The paper deals with the design of floating one- and/or two-port high-order networks. The current conveyor CCII+ seems to be a suitable active building block for this purpose. Some examples of the above mentioned networks are shown .

  3. Floating RC Networks Using Current Conveyors

    Directory of Open Access Journals (Sweden)

    V. Zeman

    1996-06-01

    Full Text Available The paper deals with the design of floating one- and/or two-port high-order networks. The current conveyor CCII+ seems to be a suitable active building block for this purpose. Some examples of the above mentioned networks are shown .

  4. A novel floating offshore wind turbine concept

    DEFF Research Database (Denmark)

    Vita, Luca; Schmidt Paulsen, Uwe; Friis Pedersen, Troels

    2009-01-01

    This paper will present a novel concept of a floating offshore wind turbine. The new concept is intended for vertical-axis wind turbine technology. The main purpose is to increase simplicity and to reduce total costs of an installed offshore wind farm. The concept is intended for deep water...

  5. Floating car data for traffic monitoring

    DEFF Research Database (Denmark)

    Torp, Kristian; Lahrmann, Harry Spaabæk

    2005-01-01

    This paper describes a complete prototype system that uses Floating Car Data (FCD) for both automatic and manual detection of queues in traffic. The system is developed under EU’s Tempo program. The systems consists of small hardware units placed in mobile traffic report units (we use taxis...

  6. Reis kosmosesse : [Floating-kambrist] / Marika Makarova

    Index Scriptorium Estoniae

    Makarova, Marika

    2011-01-01

    Ameerika psühholoogi John C. Lilly poolt kasutusele võetud Floating-kambrist ehk hõljumisvannist, mis aeglustab ajulaineid ning seeläbi aitab vähendada lihaspinget, stressi, ärevust, peavalusid, vererõhku ning parandada und, selgroo- ja kaelavigastusi, suurendada loovust ja heaolu jne

  7. Immunohistochemistry on freely floating fixed tissue sections.

    Science.gov (United States)

    Bachman, Julia

    2013-01-01

    Immunohistochemistry on free floating tissue sections is done for many reasons, all of which involve labeling tissue to visualize a certain cell type, protein, or structural component. Visualization is aided by mounting sections on microscope slides for stabilization, and is in most cases necessary for the appropriate use of objectives with a high numerical aperture and high degree of magnification.

  8. Two New Families of Floating FDNR Circuits

    Directory of Open Access Journals (Sweden)

    Ahmed M. Soliman

    2010-01-01

    Full Text Available Two new configurations for realizing ideal floating frequency-dependent negative resistor elements (FDNR are introduced. The proposed circuits are symmetrical and are realizable by four CCII or ICCII or a combination of both. Each configuration is realizable by eight different circuits. Simulation results are included to support the theory.

  9. Floating Breakwater Prototype Test Program: Seattle, Washington.

    Science.gov (United States)

    1986-03-01

    foam weight increased 250 percent because of the absorption of water. This absorption, combined with underfilling of tires during the original...A 2 the float was done in three lifts of about 1 ft each. Handheld electric vibrators were used to reduce the possibility of voids . After the sides

  10. Near-Shore Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Ruol, Piero; Zanuttigh, Barbara; Martinelli, Luca

    2011-01-01

    Aim of this note is to analyse the possible application of a Wave Energy Converter (WEC) as a combined tool to protect the coast and harvest energy. Physical model tests are used to evaluate wave transmission past a near-shore floating WEC of the wave activated body type, named DEXA. Efficiency...

  11. Reis kosmosesse : [Floating-kambrist] / Marika Makarova

    Index Scriptorium Estoniae

    Makarova, Marika

    2011-01-01

    Ameerika psühholoogi John C. Lilly poolt kasutusele võetud Floating-kambrist ehk hõljumisvannist, mis aeglustab ajulaineid ning seeläbi aitab vähendada lihaspinget, stressi, ärevust, peavalusid, vererõhku ning parandada und, selgroo- ja kaelavigastusi, suurendada loovust ja heaolu jne

  12. Moessbauer spectra of tin in float glass

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.A. [Liverpool John Moores Univ. (United Kingdom). Sch. of the Built Environ.; Johnson, C.E. [Liverpool Univ. (United Kingdom). Dept. of Physics; Williams, K.F.E. [Liverpool Univ. (United Kingdom). Dept. of Physics; Holland, D. [Warwick Univ., Coventry (United Kingdom). Dept. of Physics; Karim, M.M. [Warwick Univ., Coventry (United Kingdom). Dept. of Physics

    1995-03-01

    Tin is not a major constituent of window glass, but is found at high concentrations in the lower surface of float glass which has been in contact with the molten tin bath. It does not extend far into the surface, but causes the physical and chemical behaviour to differ from that of the upper surface. It is important, therefore, to understand the structural role of tin in silicate glasses and thus its effect on various properties. Moessbauer spectra were taken of three series of glassy materials, namely binary glasses (SnO and SiO{sub 2}) in varying proportions, re-melted float glass containing tin, and float glass from a production plant. The binary glasses contained between 20 and 70% tin which was found to be mainly Sn{sup 2+}, with very small amounts of Sn{sup 4+} in some of them. The spectra showed a small decrease in isomer shift with increase in tine content, which is ascribed to the change in molar volume. The re-melted samples were float glass which was mixed with stannous oxalate in appropriate conditions to try and maintain tin in the 2+ state, and contained up to 15% tin by weight. The spectra show both Sn{sup 4+} and Sn{sup 2+} with rather more in the 4+ oxidation state. The change in the spectra as a function of temperature revealed a large difference in the f-factor (and hence the chemical binding) of the two states. A series of spectra was taken between 17.5 and 900 K for the sample containing 15% tin. From the absorption as a function of temperature the f-factor was determined for both oxidation states, and hence enabled the relative amounts of Sn{sup 4+} and Sn{sup 2+} present in each sample to be estimated. Measurements of the shift as a function of temperature were also made. The float samples were surface material produced by grinding away all but 0.1 mm of the lower surface of industrially produced float glass. The Moessbauer spectra showed them to be predominantly Sn{sup 2+}, as expected from the reducing atmosphere in the float plant.

  13. Development of floating strip micromegas detectors

    Energy Technology Data Exchange (ETDEWEB)

    Bortfeldt, Jonathan

    2014-04-28

    Micromegas are high-rate capable, high-resolution micro-pattern gaseous detectors. Square meter sized resistive strip Micromegas are foreseen as replacement of the currently used precision tracking detectors in the Small Wheel, which is part of the forward region of the ATLAS muon spectrometer. The replacement is necessary to ensure tracking and triggering performance of the muon spectrometer after the luminosity increase of the Large Hadron Collider beyond its design value of 10{sup 34} cm{sup -2}s{sup -1} around 2020. In this thesis a novel discharge tolerant floating strip Micromegas detector is presented and described. By individually powering copper anode strips, the effects of a discharge are confined to a small region of the detector. This reduces the impact of discharges on the efficiency by three orders of magnitude, compared to a standard Micromegas. The physics of the detector is studied and discussed in detail. Several detectors are developed: A 6.4 x 6.4 cm{sup 2} floating strip Micromegas with exchangeable SMD capacitors and resistors allows for an optimization of the floating strip principle. The discharge behavior is investigated on this device in depth. The microscopic structure of discharges is quantitatively explained by a detailed detector simulation. A 48 x 50 cm{sup 2} floating strip Micromegas is studied in high energy pion beams. Its homogeneity with respect to pulse height, efficiency and spatial resolution is investigated. The good performance in high-rate background environments is demonstrated in cosmic muon tracking measurements with a 6.4 x 6.4 cm{sup 2} floating strip Micromegas under lateral irradiation with 550 kHz 20 MeV proton beams. A floating strip Micromegas doublet with low material budget is developed for ion tracking without limitations from multiple scattering in imaging applications during medical ion therapy. Highly efficient tracking of 20 MeV protons at particle rates of 550 kHz is possible. The reconstruction of the

  14. Biofouling Organisms in the Field and for the Classroom.

    Science.gov (United States)

    Stout, Prentice K.

    1983-01-01

    Biofouling organisms are marine organisms that affix themselves to navigational buoys, floating docks, and pilings. Techniques for collecting these organisms for classroom use are described. General background information on the organisms and a list of common species are included. (JN)

  15. Effects of vibration characteristics on the walking discomfort of floating floors on concrete slabs.

    Science.gov (United States)

    Kim, Jae Ho; Jeon, Jin Yong

    2014-10-01

    In the present study, the vibration characteristics of floating floor systems and the discomfort in walking upon them have been studied in concrete slab structures through mock-up floors experiments. Seven types of floor systems, with panels of various sizes and supporting beams with different joist spacings, were constructed based on actual conditions. For the vibration measurement, an ISO rubber ball dropped from a height of 20 cm was used as an impact source to reproduce human walking. The vibration characteristics were evaluated by calculating the vibration acceleration values and the autocorrelation function parameters for the floor structures. Finally, a human walking experiment was conducted to investigate subjective responses to the vibration characteristics of floating floors. From the results, it was found that the vibration acceleration values and walking discomfort varied with the supporting conditions of the floors and that these were highly correlated with each other. It was also found that more than 75% of subjects accepted the floors when the vibration value of the floor in terms of vibration does value (VDV) is below 4.8 ms(-1.75). In addition, a practical regression of the VDV was obtained and design guidelines for floating floors were suggested.

  16. Drop stability in wind: theory

    Science.gov (United States)

    Lee, Sungyon

    2015-11-01

    Water drops may remain pinned on a solid substrate against external forcing due to contact angle hysteresis. Schmucker and White investigated this phenomenon experimentally in a high Reynolds number regime, by measuring the critical wind velocity at which partially wetting water drops depin inside a wind tunnel. Due to the unsteady turbulent boundary layer, droplets are observed to undergo vortex-shedding induced oscillations. By contrast, the overall elongation of the drop prior to depinning occurs on a much slower timescale with self-similar droplet shapes at the onset. Based on these observations, a simple, quasi-static model of depinning droplet is developed by implementing the phenomenological description of the boundary layer. The resultant model successfully captures the critical onset of droplet motion and is the first of on-going studies that connect the classical boundary layer theory with droplet dynamics.

  17. Interfacial Instabilities in Evaporating Drops

    Science.gov (United States)

    Moffat, Ross; Sefiane, Khellil; Matar, Omar

    2007-11-01

    We study the effect of substrate thermal properties on the evaporation of sessile drops of various liquids. An infra-red imaging technique was used to record the interfacial temperature. This technique illustrates the non-uniformity in interfacial temperature distribution that characterises the evaporation process. Our results also demonstrate that the evaporation of methanol droplets is accompanied by the formation of wave-trains in the interfacial temperature field; similar patterns, however, were not observed in the case of water droplets. More complex patterns are observed for FC-72 refrigerant drops. The effect of substrate thermal conductivity on the structure of the complex pattern formation is also elucidated.

  18. Collisions of cloud droplets with a rain drop investigated in the Mainz vertical wind tunnel

    Science.gov (United States)

    Górska, Anna; Fugal, Jacob; Mitra, Subir; Malinowski, Szymon; Szakall, Miklos; von Blohn, Nadine; Jost, Alex; Borrmann, Stephan

    2015-04-01

    Collisions of cloud droplets with rain drops and the ensuing collection of cloud droplets are important phenomena for precipitation formation. Representation of these processes in cloud and climate models, though adequate in some cases, is based on very few actual measurements to validate these parameterisations. Therefore we apply in-line holography to observe single collisions and near-collisions of cloud droplets with a rain drop in the Mainz vertical wind tunnel. So far we have measurements in a laminar flow seeded with small droplets of diameters between 20 and 70 μm. Into the stream, a single collector drop of diameter of ~700 μm was injected and floated in a sample volume by adjusting the vertical velocity of the wind tunnel to match the terminal velocity of the drop (~3 m/s). With a collimated laser beam and a high speed camera, we recorded holograms of the drop and droplets in the sample volume, which after reconstruction allows us to determine 3D positions of the droplets and the collecting drop, their diameters and droplet size distributions. With the time-resolved particle positions, we connect droplets from one hologram with droplets in the next hologram, which occurs in the predicted area calculated on the basis of known mean flow velocity. Analysis of successive images allows us to obtain trajectories of cloud droplets and especially their tracks close to the collector drop. With the obtained time resolution we have about 4-5 point droplet tracks through which we document collisions. A collision appears when we see a droplet approaching the collector drop and the droplet does not continue past the drop. We present the experimental method, data processing procedure and collisions characteristic founded in a data series length of about 50 s, yielding around 70-100 collisions.

  19. Blown Away: The Shedding and Oscillation of Sessile Drops by Cross Flowing Air

    Science.gov (United States)

    Milne, Andrew James Barnabas

    For drops sessile on a solid surface, cross flowing air can drive drop oscillation or shedding, based on the balance and interaction of aerodynamic drag force (based on drop size/shape and air speed) and adhesion/capillary forces (based on surface tension and drop size/shape). Better understanding of the above has applications to, e.g., fuel cell flooding, airfoil icing, and visibility in rain. To understand the basic physics, experiments studying individual sessile drops in a low speed wind tunnel were performed in this thesis. Analysis of high speed video gave time resolved profiles and airspeed for shedding. Testing 0.5 mul to 100 mul drops of water and hexadecane on poly(methyl methacrylate) PMMA, Teflon, and a superhydrophobic surface (SHS) yielded a master curve describing critical airspeed for shedding for water drops on all surface tested. This curve predicts behavior for new surfaces, and explains experimental results published previously. It also indicates that the higher contact angle leads to easier shedding due to decreased adhesion and increased drag. Developing a novel floating element differential drag sensor gave the first measurements of the microNewton drag force experienced by drops. Forces magnitude is comparable to gravitational shedding from a tilted plate and to simplified models for drop adhesion, with deviations that suggest effects due to the air flow. Fluid properties are seen to have little effect on drag versus airspeed, and decreased adhesion is seen to be more important than increased drag for easing shedding. The relation between drag coefficient and Reynolds number increases slightly with liquid-solid contact angle, and with drop volume. Results suggest that the drop experiences increased drag compared to similarly shaped solid bodies due to drop oscillations aeroelasticly coupling into the otherwise laminar flow. The bulk and surface oscillations of sessile drops in cross flow was also studied, using a full profile analysis

  20. Seven centuries of atmospheric Pb deposition recorded in a floating mire from Central Italy

    Science.gov (United States)

    Zaccone, Claudio; Lobianco, Daniela; D'Orazio, Valeria; Miano, Teodoro M.; Shotyk, William

    2016-04-01

    Floating mires generally consist of emergent vegetation rooted in highly organic buoyant mats that rise and fall with changes in water level. Generally speaking, the entire floating mass (mat) is divided into a mat root zone and an underlying mat peat zone. Floating mires are distributed world-wide; large areas of floating marsh occur along rivers and lakes in Africa, the Danube Delta in Romania, the Amazon River in South America, and in the Mississippi River delta in USA, whereas smaller areas occur also in The Netherlands, Australia and Canada. While peat cores from ombrotrophic bogs have been often (and successfully) used to reconstruct changes in the atmospheric deposition of several metals (including Pb), no studies are present in literature about the possibility to use peat profiles from floating mires. To test the hypothesis that peat-forming floating mires could provide an exceptional tool for environmental studies, a complete, 4-m deep peat profile was collected in July 2012 from the floating island of Posta Fibreno, a relic mire in the Central Italy. This floating island has a diameter of ca. 30 m, a submerged thickness of about 3 m, and the vegetation is organized in concentric belts, from the Carex paniculata palisade to the Sphagnum palustre centre. The whole core was frozen cut each 1-to-2 cm (n =231), and Pb determined by quadrupole ICP-MS (at the ultraclean SWAMP lab, University of Alberta, Canada) in each sample throughout the first 100 cm, and in each odd-numbered slice for the remaining 300 cm. The 14C age dating of organic sediments (silty peat) isolated from the sample at 385 cm of depth revealed that the island probably formed ca. 700 yrs ago. Lead concentration trend shows at least two main zones of interest, i.e., a clear peak (ranging from 200 to 1600 ppm) between 110-115 cm of depth, probably corresponding to early 1960's - late 1970's, and a broad band (80-160 ppm) between 295-320 cm of depth, corresponding to approximately AD 1480

  1. Fluid flow in drying drops

    NARCIS (Netherlands)

    Gelderblom, H.

    2013-01-01

    When a suspension drop evaporates, it leaves behind a drying stain. Examples of these drying stains encountered in daily life are coffee or tea stains on a table top, mineral rings on glassware that comes out of the dishwasher, or the salt deposits on the streets in winter. Drying stains are also pr

  2. New identities for sessile drops

    CERN Document Server

    Hajirahimi, Maryam; Fatollahi, Amir H

    2014-01-01

    A new set of mathematical identities is presented for axi-symmetric sessile drops on flat and curved substrates. The geometrical parameters, including the apex curvature and height, and the contact radius, are related by the identities. The validity of the identities are checked by various numerical solutions both for flat and curved substrates.

  3. Egg Drop: An Invention Workshop

    Science.gov (United States)

    McCormack, Alan J.

    1973-01-01

    Describes an activity designed to stimulate elementary and junior high students to become actively engaged in thinking creatively rather than only analytically, convergently, or repetitively. The activity requires students to devise means of dropping an egg from a height without it breaking. (JR)

  4. Evaporating Drops of Alkane Mixtures

    OpenAIRE

    Guéna, Geoffroy; Poulard, Christophe; Cazabat, Anne-Marie

    2005-01-01

    22 pages 9 figures; Alkane mixtures are model systems where the influence of surface tension gradients during the spreading and the evaporation of wetting drops can be easily studied. The surface tension gradients are mainly induced by concentration gradients, mass diffusion being a stabilising process. Depending on the relative concentration of the mixture, a rich pattern of behaviours is obtained.

  5. ``Quantum'' interference with bouncing drops

    Science.gov (United States)

    Bohr, Tomas; Andersen, Anders; Madsen, Jacob; Reichelt, Christian; Lautrup, Benny; Ellegaard, Clive; Levinsen, Mogens

    2013-11-01

    In a series of recent papers (most recently) Yves Couder and collaborators have explored the dynamics of walking drops on the surface of a vibrated bath of silicon oil and have demonstrated a close analogy to quantum phenomena. The bouncing drop together with the surface wave that it excites seems to be very similar to the pilot wave envisaged by de Broglie for quantum particles. In particular, have studied a double slit experiment with walking drops, where an interference pattern identical to the quantum version is found even though it is possible to follow the orbits of the drops and unambigously determine which slit it goes through, something which in quantum mechanics would be ruled out by the Heisenberg uncertainly relations. We have repeated the experiment and present a somewhat more complicated picture. Theoretically, we study a Schrödinger equation with a source term originating from a localised ``particle'' being simultaneously guided by the wave. We present simple solutions to such a field theory and discuss the fundamental difficulties met by such a theory in order to comply with quantum mechanics.

  6. Drops, contact lines, and electrowetting

    NARCIS (Netherlands)

    Mannetje, 't D.J.C.M.

    2013-01-01

    In this work, we study the behaviour of drops and contact lines under the influence of electric fields, and how these can answer fundamental and industrial questions. Our focus is on studying the varying balance of the electric field, hysteresis forces and inertia as the speed of a contact line chan

  7. Evaporating Drops of Alkane Mixtures

    CERN Document Server

    Gu'ena, G; Poulard, C; Cazabat, Anne-Marie; Gu\\'{e}na, Geoffroy; Poulard, Christophe

    2005-01-01

    Alkane mixtures are model systems where the influence of surface tension gradients during the spreading and the evaporation of wetting drops can be easily studied. The surface tension gradients are mainly induced by concentration gradients, mass diffusion being a stabilising process. Depending on the relative concentration of the mixture, a rich pattern of behaviours is obtained.

  8. Drops spreading on flexible fibers

    Science.gov (United States)

    Somszor, Katarzyna; Boulogne, François; Sauret, Alban; Dressaire, Emilie; Stone, Howard

    2015-11-01

    Fibrous media are encountered in many engineered systems such as textile, paper and insulating materials. In most of these materials, fibers are randomly oriented and form a complex network in which drops of wetting liquid tend to accumulate at the nodes of the network. Here we investigate the role of the fiber flexibility on the spreading of a small volume of liquid on a pair of crossed flexible fibers. A drop of silicone oil is dispensed at the point of contact of the fibers and we characterize the liquid morphologies as we vary the volume of liquid, the angle between the fibers, and the length and bending modulus of the fibers. Drop morphologies previously reported for rigid fibers, i.e. a drop, a column and a mixed morphology, are also observed on flexible fibers with modified domains of existence. Moreover, at small inclination angles of the fibers, a new behavior is observed: the fibers bend and collapse. Depending on the volume, the liquid can adopt a column or a mixed morphology on the collapsed fibers. We rationalize our observations with a model based on energetic considerations. Our study suggests that the fiber flexibility adds a rich variety of behaviors that can be crucial for industrial applications.

  9. Pressure drop in contraction flow

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz

    This note is a supplement to Dynamic of Polymeric Liquids (DPL) page 178. DPL gives an equation for the pressure drop in a tapered (and circular) contraction, valid only at low angles. Here the general definition of contraction flow (the Bagley correction) and a more general method to find...

  10. A multiple floating point coprocessor architecture

    Energy Technology Data Exchange (ETDEWEB)

    Rauchwerger, L.; Farmwald, M.P. (Center for Supercomputing Research and Development, Univ. of Illinois at Urbana-Champaign, 305 Talbot Lab., Urbana, IL (US))

    1990-06-01

    General purpose microprocessor based computers usually speed their arithmetic processing performance by using a floating point co-processor. Because adding more co-processors represents neither a technological nor a cost problem the authors investigated a system based on a MIPS R2000 (2) and 4 floating point units. In this paper they show a block diagram of such an implementation and how two important scientific operations can be accelerated using a single unmodified data bus. A large percentage of the engineering applications are solved with the help of linear algebra methods like BLAS3 (4) algorithms; it is precisely for these primitives that the proposed architecture brings significant performance gains. The first operation described is a matrix multiplication algorithm, its timing diagram and some results. Next a polynomial evaluation technique is examined. The authors show how to use the same ideas with various other microprocessors.

  11. Optimizing polynomials for floating-point implementation

    CERN Document Server

    De Dinechin, Florent

    2008-01-01

    The floating-point implementation of a function on an interval often reduces to polynomial approximation, the polynomial being typically provided by Remez algorithm. However, the floating-point evaluation of a Remez polynomial sometimes leads to catastrophic cancellations. This happens when some of the polynomial coefficients are very small in magnitude with respects to others. In this case, it is better to force these coefficients to zero, which also reduces the operation count. This technique, classically used for odd or even functions, may be generalized to a much larger class of functions. An algorithm is presented that forces to zero the smaller coefficients of the initial polynomial thanks to a modified Remez algorithm targeting an incomplete monomial basis. One advantage of this technique is that it is purely numerical, the function being used as a numerical black box. This algorithm is implemented within a larger polynomial implementation tool that is demonstrated on a range of examples, resulting in ...

  12. Lightning Protection of Floating Roof Tanks

    Directory of Open Access Journals (Sweden)

    Adekitan,

    2013-10-01

    Full Text Available Prior to export, processed crude oil is stored in Floating Roof Tanks (FRT to further allow any trapped gas within the crude oil to escape, as this stabilises the crude oil. In the oil and gas industry, FRT’s are vital in the processing of crude oil to the acceptable export specification.In the tropics and other lightning prone regions, lightning induced floating roof tank fire constitutes a major threat to crude oil production. Among others, a single lightning incident could result in the loss of life, product and production time, avoidable incident review time, damaged equipment, wasted repair cost, bad publicity and loss of income.This paper therefore, is aimed at providing an effective solution to the menace of lightning induced tank fire by focussing on the starting process of the lightning induced fire and proposing alternative concepts for breaking the fire triangle before fire ensues

  13. Capillary deposition of advected floating particles

    Science.gov (United States)

    Dressaire, Emilie; Debaisieux, Aymeric; Gregori, Federico

    2016-11-01

    The deposition and aggregation of particles flowing through a confined environment can dramatically hinder the transport of suspensions. Yet, the mechanisms responsible for the deposition of particles in shear flow are not fully understood. Here, we use an experimental model system in which floating particles are advected on the surface of a water channel and deposited on fixed obstacles through attractive capillary effects. By varying the flow rate of the liquid, the wetting properties and size of the particles and obstacles, we can tune the magnitude of the capillary and hydrodynamic forces that determine the probability of deposition and the equilibrium position on the substrate. We show that arrays of obstacles can be designed to efficiently capture the floating particles advected by the flow.

  14. Seismic Response of Submerged Floating Tunnel Tether

    Institute of Scientific and Technical Information of China (English)

    SU Zhi-bin; SUN Sheng-nan

    2013-01-01

    A mathematical equation for vibration of submerged floating tunnel tether under the effects of earthquake and parametric excitation is presented.Multi-step Galerkin method is used to simplify this equation and the fourth-order Runge-Kuta integration method is used for numerical analysis.Finally,vibration response of submerged floating tunnel tether subjected to earthquake and parametric excitation is analyzed in a few numerical examples.The results show that the vibration response of tether varies with the seismic wave type; the steady maximum mid-span displacement of tether subjected to seismic wave keeps constant when parametric resonance takes place; the transient maximum mid-span displacement of tether is related to the peak value of input seismic wave acceleration.

  15. Conceptual Design of Navy Floating Pier.

    Science.gov (United States)

    1982-09-01

    which do not have existing flood basins or dry dock facilities. 3.1.3 The Advantages As Navy Piers The floating pier provides a structure well suited to...Bureau of Yards and Docks built 13 reinforced concrete floating repair docks each of 280 ton lift capacity. Bach dock was 390 ft. long, 80 ft. wide and...4 176CK ApoQ &LLKHC-AP6, COLUMNN AND eAr4b V~JricAL- roA~~scN LY T’B 4OPr~C-. I200-+0k 𔄀 CELLO £TNAT STRUCTUARAL EN4GINEERING " NrE FZ IR MJUə

  16. Migration Laws of Floating Population in Mianyang

    Institute of Scientific and Technical Information of China (English)

    LiuPeng

    2005-01-01

    Based on the overall anatysis of the floating population among big and medium-sized cities in China, this paper, by means of statistics and questionnaires, makes a systematical study on the migratory features of the floating population in Mianyang, its employment structure, migrating causes and channels, According to the findings, the author finds a fact that with the strategy of Western Development, and with the construction of science and technology city of Mianyang, the migrating in Mianyang conforms to the general patterns of themigration, which has happened in those big and medium-sized cities in China. In addition, the city has a new but unique feature - economic factor, as the driving force of popufation migration, is quite distinct from that of those cities in eastern areas of China.

  17. FLOATING DRUG DELIVERY SYSTEM - CHRONOTHERAPEUTIC APPROACH

    Directory of Open Access Journals (Sweden)

    Vishal Kalal

    2011-04-01

    Full Text Available The purpose of writing this review on the floating drug delivery systems (FDDS was to compile the recent literature with special focus on the principal mechanism of floatation to achieve gastric retention. FDDS is one of the approaches in chronotherapeutic drug delivery. In the past reviews of FDDS the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, their classification and formulation aspects have been covered. This review summarizes the special focus on chronotherapeutics, diseases affected by biological rhythm, its importance, advantages, various approaches in Chronotherapeutic drug delivery and applications of FDDS. These systems are useful for several problems encountered during the development of a pharmaceutical dosage forms.

  18. Voltage-Controlled Floating Resistor Using DDCC

    Directory of Open Access Journals (Sweden)

    M. Kumngern

    2011-04-01

    Full Text Available This paper presents a new simple configuration to realize the voltage-controlled floating resistor, which is suitable for integrated circuit implementation. The proposed resistor is composed of three main components: MOS transistor operating in the non-saturation region, DDCC, and MOS voltage divider. The MOS transistor operating in the non-saturation region is used to configure a floating linear resistor. The DDCC and the MOS transistor voltage divider are used for canceling the nonlinear component term of MOS transistor in the non-saturation region to obtain a linear current/voltage relationship. The DDCC is employed to provide a simple summer of the circuit. This circuit offers an ease for realizing the voltage divider circuit and the temperature effect that includes in term of threshold voltage can be compensated. The proposed configuration employs only 16 MOS transistors. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory.

  19. Management of "floating elbow" in children

    Directory of Open Access Journals (Sweden)

    Suresh S

    2007-01-01

    Full Text Available Background: Supracondylar fractures associated with ipsilateral forearm fractures, aptly termed as "floating elbow" is a rare injury in children after a fall from height. The various authors report their results with conservative treatment of one or both injury to aggressive emergency operative fixation of both components. Materials and Methods: During a period of three years, the author managed four cases of floating elbow in children. All cases were managed by closed reduction and pinning of both components of the injury. Results: All patients recovered full elbow range of motion at three months followup and were rated as excellent as per modified Flynn′s criteria. None of the patients developed cubitus varus deformity, complications related to the pins or delayed union. Conclusions: Early closed reduction and K wire fixation of both components of this injury gives better stability and prevents development of complications like compartment syndrome and elbow deformities.

  20. Floating behavior of hydrophobic glass spheres.

    Science.gov (United States)

    Liu, Xinjie; Wang, Xiaolong; Liang, Yongmin; Zhou, Feng

    2009-08-15

    When a hydrophobic solid sphere is floating on water or salt solutions with different concentrations, it is at equilibrium under the impact of gravity, buoyancy force, and curvature force, the component of surface tension in the vertical direction. We have changed the diameters of the spheres and the concentrations of the two selected salts, NaCl and NaNO(3), to study the floating behaviors of these spheres and the contributions of surface tension and buoyancy force to their floatation. Generally speaking, the surface tension plays a more important role than the buoyancy force when the gravity is small, but the buoyancy force plays an identical or a more important role when the spheres are big enough. The wettability of the spheres significantly influences the height below the contact perimeter especially in salt solutions. The theoretical calculation meniscus slope angles at the sphere three-phase contact line are in agreement with experimental results.

  1. Arithmetic Operations Beyond Floating Point Number Precision

    CERN Document Server

    Wang, Chih-Yueh; Chen, Hong-Yu; Chen, Yung-Ko

    2010-01-01

    In basic computational physics classes, students often raise the question of how to compute a number that exceeds the numerical limit of the machine. While technique of avoiding overflow/underflow has practical application in the electrical and electronics engineering industries, it is not commonly utilized in scientific computing, because scientific notation is adequate in most cases. We present an undergraduate project that deals with such calculations beyond a machine's numerical limit, known as arbitrary precision arithmetic. The assignment asks students to investigate the validity of floating point number precision and the approach of calculating the exact value of a large number, using the basic scientific programming language Fortran. Examples of the successive multiplication of even number and the multiplication and division of two overflowing floats are presented. The application of the scheme to hardware and firmware design which requires the allocation of finite memory, as in a digital signal proce...

  2. Synthesizing Accurate Floating-Point Formulas

    OpenAIRE

    Ioualalen, Arnault; Martel, Matthieu

    2013-01-01

    International audience; Many critical embedded systems perform floating-point computations yet their accuracy is difficult to assert and strongly depends on how formulas are written in programs. In this article, we focus on the synthesis of accurate formulas mathematically equal to the original formulas occurring in source codes. In general, an expression may be rewritten in many ways. To avoid any combinatorial explosion, we use an intermediate representation, called APEG, enabling us to rep...

  3. Implementation of Floating-point Coprocessor

    OpenAIRE

    Skogstrøm, Kristian

    2005-01-01

    This thesis presents the architecture and implementation of a high-performance floating-point coprocessor for Atmel's new microcontroller. The coprocessor architecture is based on a fused multiply-add pipeline developed in the specialization project, TDT4720. This pipeline has been optimized significantly and extended to support negation of all operands and single-precision input and output. New hardware has been designed for the decode/fetch unit, the register file, the compare/convert pipe...

  4. Termination of floating-point computations

    OpenAIRE

    Serebrenik, Alexander; De Schreye, Danny

    2005-01-01

    Numerical computations form an essential part of almost any real-world program. Traditional approaches to termination of logic programs are restricted to domains isomorphic to (N,>); more recent works study termination of integer computations where the lack of well-foundedness of the integers has to be taken into account. Termination of computations involving floating-point numbers can be counterintuitive because of rounding errors and implementation conventions. We present a novel technique ...

  5. Floating gate transistors as biosensors (Conference Presentation)

    Science.gov (United States)

    Frisbie, C. Daniel

    2016-11-01

    Electrolyte gated transistors (EGTs) are a sub-class of thin film transistors that are extremely promising for biological sensing applications. These devices employ a solid electrolyte as the gate insulator; the very large capacitance of the electrolyte results in low voltage operation and high transconductance or gain. This talk will describe the fabrication of floating gate EGTs and their use as ricin sensors. The critical performance metrics for EGTs compared with other types of TFTs will also be reviewed.

  6. Ships as future floating farm systems?

    Science.gov (United States)

    Moustafa, Khaled

    2016-09-29

    Environmental and agriculture challenges such as severe drought, desertification, sprawling cities and shrinking arable lands in large regions in the world compel us to think about alternative and sustainable farming systems. Ongoing projects to build floating cities in the sea suggest that building specific ships for farming purposes (as farming ships or farming boats) would also be attainable to introduce new farming surfaces and boost food production worldwide to cope with food insecurity issues.

  7. Floating asphalt blocks of the Dead Sea

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, A. (Weizmann Inst. of Science, Rehovot, Israel); Aizenshtat, Z.; Goldberg, M.

    1980-01-01

    Large blocks of mineral matter free (less than 0.1%) asphalt are occasionally found floating on the surface of the Dead Sea. Chemical, spectroscopic and isotopic data are given for the asphalt. The source of the asphalt is not accurately known, but presumably it represents mobilization of heavy viscous asphaltic masses at depth below the lake bottom into the floor of the lake. It may be released to the surface by earth tremors.

  8. Turbomachinery systems for floating production applications

    Energy Technology Data Exchange (ETDEWEB)

    Windt, Jonathan P.; Kurz, Rainer [Solar Turbines Incorporated, San Diego, CA (United States)

    2008-07-01

    Since 1995 there has been a dramatic increase in oil and gas exploration and production using floating platforms in deeper waters located further offshore. This exploration started with tension leg platforms, progressed through SPARs and Semi-Submersibles, and later evolved into Floating Production Storage and Offloading (FPSO) vessels. Turbomachinery equipment installed on a floating platform or vessel will be expected to operate in the same manner as a land based machine, but in a variety of climate and environmental conditions that now includes motion. To operate successfully, specific design considerations for the turbo-machinery packages are required. It is critical to take into account the type of vessel, the expected list, trim and dynamic motion angles, the dynamic forces applied, the expected deck deflection as a result of those forces, understand the applicable class requirement, and where the equipment will be located on the vessel. This information is then translated into the design conditions to determine the type of mounting method to be used to attach the turbo-machinery package to the deck, the expected accelerations for structural analysis, and oil tank and system designs for fluid management. Furthermore, compressor designs need to allow utmost flexibility to adapt to changing operating conditions. (author)

  9. [A correct understanding of preservatives in eye drops].

    Science.gov (United States)

    Liu, Zuguo; Huang, Caihong

    2015-09-01

    Eye drops are the most commonly used preparations in ophthalmology. Preservatives are usually added in order to protect eye drops against pathogenic organisms and increase the solubility of the drugs in multi-dose containers. Ophthalmologists have paid a lot of attention to the preservatives in eye drops because they remain one of the main reasons for ocular surface damage, and even may lead to serious visual impairment in patients with inappropriate use of eye drops. However, it should be noted that the dangers of preservatives become overstated nowadays. It is necessary to completely evaluate the effects of preservatives in ophthalmic preparations, so that ophthalmologists can guide patients to correctly select eye drops containing preservatives and avoid dangerous side effects, according to their eye disease situation, state of tear function and ocular surface changes, cultural background and financial income, cost and benefit and convenience of the use of drugs, and other factors. The direction of the future development in this field is to establish the clinical guideline for use of eye drops containing preservatives, carry out continuing education courses on preservatives and develop ideal preservatives.

  10. Analysis and Countermeasures of Organization of Drop and Pull Transportation in Ro-Ro Transportation%滚装运输中的甩挂运输组织分析及对策

    Institute of Scientific and Technical Information of China (English)

    靳志宏; 韩雪梅; 靳新; 杨光敏

    2013-01-01

    In this paper, we analyzed quantitatively the advantage and disadvantage of the drop and pull transportation mode and conventional transportation modes in the Ro-Ro transportation market, applied the fuzzy AHP in a quantitative evaluation of the two organizational arrangements, and then proposed accordingly the implementation of drop and pull transportation in Ro-Ro transportation.%在定性分析滚装运输市场传统组织方式与甩挂组织方式优劣势的基础上,应用模糊层次分析法对滚装运输两种组织方式进行定量评价,结果表明甩挂组织方式对滚装运输整体效益贡献较大,进而对滚装运输甩挂运输组织的实施提出了对策。

  11. Nonvolatile Transistor Memory with Self-Assembled Semiconducting Polymer Nanodomain Floating Gates.

    Science.gov (United States)

    Wang, Wei; Kim, Kang Lib; Cho, Suk Man; Lee, Ju Han; Park, Cheolmin

    2016-12-14

    Organic field effect transistor based nonvolatile memory (OFET-NVM) with semiconducting nanofloating gates offers additional benefits over OFET-NVMs with conventional metallic floating gates due to the facile controllability of charge storage based on the energetic structure of the floating gate. In particular, an all-in-one tunneling and floating-gate layer in which the semiconducting polymer nanodomains are self-assembled in the dielectric tunneling layer is promising. In this study, we utilize crystals of a p-type semiconducting polymer in which the crystalline lamellae of the polymer are spontaneously developed and embedded in the tunneling matrix as the nanofloating gate. The widths and lengths of the polymer nanodomains are approximately 20 nm and a few hundred nanometers, respectively. An OFET-NVM containing the crystalline nanofloating gates exhibits memory performance with a large memory window of 10 V, programming/erasing switching endurance for over 500 cycles, and a long retention time of 5000 s. Moreover, the device performance is improved by comixing with an n-type semiconductor; thus, the solution-processed p- and n-type double floating gates capable of storing both holes and electrons allow for the multilevel operation of our OFET-NVM. Four highly reliable levels (two bits per cell) of charge trapping and detrapping are achieved using this OFET-NVM by accurately choosing the programming/erasing voltages.

  12. Application of Ultrasound-Assisted Surfactant-Enhanced Emulsification Microextraction Based on Solidification of Floating Organic Droplets and High Performance Liquid Chromatography for Preconcentration and Determination of Alprazolam and Chlordiazepoxide in Human Serum Samples.

    Science.gov (United States)

    Goudarzi, Nasser; Amirnavaee, Monavar; Arab Chamjangali, Mansour; Farsimadan, Sahar

    2017-03-03

    An improved microextraction method is proposed on the basis of ultrasound-assisted surfactant-enhanced emulsification and solidification of a floating organic droplet procedure combined with high performance liquid chromatography for the preconcentration and quantification of alprazolam (ALP) and chlordiazepoxide (CHL) present in a number of human serum samples. Several parameters affecting the extraction efficiency were investigated by the Plackett -Burman factorial design as the screening design. Then the response surface methodology based on the Box-Behnken design was used to optimize the effective parameters in the proposed procedure. The limits of detection for the proposed method were found to be 3.0 and 3.1 ng mL-1 for CHL and ALP, respectively. The calibration curves obtained for the method were linear in the ranges of 10.0-3,500.0 and 10.0-3,000.0 ng mL-1 for CHL and ALP, respectively, with a good determination coefficient. The recoveries of the drugs in the spiked human serum samples were above 93.0%. The developed method was successfully applied to the analysis of these studied drugs in human serum samples. The pre-treatment of the serum samples was performed using acetonitrile to remove the proteins. The proposed procedure was an accurate and reliable one for the determination and preconcentration of these drugs in blood samples.

  13. Float processing of high-temperature complex silicate glasses and float baths used for same

    Science.gov (United States)

    Cooper, Reid Franklin (Inventor); Cook, Glen Bennett (Inventor)

    2000-01-01

    A float glass process for production of high melting temperature glasses utilizes a binary metal alloy bath having the combined properties of a low melting point, low reactivity with oxygen, low vapor pressure, and minimal reactivity with the silicate glasses being formed. The metal alloy of the float medium is exothermic with a solvent metal that does not readily form an oxide. The vapor pressure of both components in the alloy is low enough to prevent deleterious vapor deposition, and there is minimal chemical and interdiffusive interaction of either component with silicate glasses under the float processing conditions. Alloys having the desired combination of properties include compositions in which gold, silver or copper is the solvent metal and silicon, germanium or tin is the solute, preferably in eutectic or near-eutectic compositions.

  14. Floating Oil-Spill Containment Device

    Science.gov (United States)

    Jones, Jack A.

    2012-01-01

    Previous oil containment booms have an open top that allows natural gas to escape, and have significant oil leakage due to wave action. Also, a subsea pyramid oil trap exists, but cannot move relative to moving oil plumes from deepsea oil leaks. The solution is to have large, moveable oil traps. One version floats on the sea surface and has a flexible tarp cover and a lower weighted skirt to completely entrap the floating oil and natural gas. The device must have at least three sides with boats pulling at each apex, and sonar or other system to track the slowly moving oil plume, so that the boats can properly locate the booms. The oil trap device must also have a means for removal of the oil and the natural gas. A second design version has a flexible pyramid cover that is attached by lines to ballast on the ocean floor. This is similar to fixed, metal pyramid oil capture devices in the Santa Barbara Channel off the coast of California. The ballast lines for the improved design, however, would have winches that can move the pyramid to always be located above the oil and gas plume. A third design is a combination of the first two. It uses a submerged pyramid to trap oil, but has no anchor and uses boats to locate the trap. It has ballast weights located along the bottom of the tarp and/or at the corners of the trap. The improved floating oil-spill containment device has a large floating boom and weighted skirt surrounding the oil and gas entrapment area. The device is triangular (or more than three sides) and has a flexible tarp cover with a raised gas vent area. Boats pull on the apex of the triangles to maintain tension and to allow the device to move to optimum locations to trap oil and gas. The gas is retrieved from a higher buoyant part of the tarp, and oil is retrieved from the floating oil layer contained in the device. These devices can be operated in relatively severe weather, since waves will break over the devices without causing oil leaking. Also, natural

  15. Non-coalescence of oppositely charged drops

    CERN Document Server

    Ristenpart, W D; Belmonte, A; Dollar, F; Stone, H A

    2009-01-01

    Oppositely charged drops have long been assumed to experience an attractive force that favors their coalescence. In this fluid dynamics video we demonstrate the existence of a critical field strength above which oppositely charged drops do not coalesce. We observe that appropriately positioned and oppositely charged drops migrate towards one another in an applied electric field; but whereas the drops coalesce as expected at low field strengths, they are repelled from one another after contact at higher field strengths. Qualitatively, the drops appear to `bounce' off one another. We directly image the transient formation of a meniscus bridge between the bouncing drops.

  16. How to freeze drop oscillations with powders

    Science.gov (United States)

    Marston, Jeremy; Zhu, Ying; Vakarelski, Ivan; Thoroddsen, Sigurdur

    2012-11-01

    We present experiments that show when a water drop impacts onto a bed of fine, hydrophobic powder, the final form of the drop can be very different from the spherical form with which it impacts. For all drop impact speeds, the drop rebounds due to the hydrophobic nature of the powder. However, we observe that above a critical impact speed, the drop undergoes a permanent deformation to a highly non-spherical shape with a complete coverage of powder, thus creating a deformed liquid marble. This powder coating acts to freeze the drop oscillations during rebound.

  17. Dancing drops over vibrating substrates

    Science.gov (United States)

    Borcia, Rodica; Borcia, Ion Dan; Helbig, Markus; Meier, Martin; Egbers, Christoph; Bestehorn, Michael

    2017-04-01

    We study the motion of a liquid drop on a solid plate simultaneously submitted to horizontal and vertical harmonic vibrations. The investigation is done via a phase field model earlier developed for describing static and dynamic contact angles. The density field is nearly constant in every bulk region (ρ = 1 in the liquid phase, ρ ≈ 0 in the vapor phase) and varies continuously from one phase to the other with a rapid but smooth variation across the interfaces. Complicated explicit boundary conditions along the interface are avoided and captured implicitly by gradient terms of ρ in the hydrodynamic basic equations. The contact angle θ is controlled through the density at the solid substrate ρ S , a free parameter varying between 0 and 1 [R. Borcia, I.D. Borcia, M. Bestehorn, Phys. Rev. E 78, 066307 (2008)]. We emphasize the swaying and the spreading modes, earlier theoretically identified by Benilov and Billingham via a shallow-water model for drops climbing uphill along an inclined plane oscillating vertically [E.S. Benilov, J. Billingham, J. Fluid Mech. 674, 93 (2011)]. The numerical phase field simulations will be completed by experiments. Some ways to prevent the release of the dancing drops along a hydrophobic surface into the gas atmosphere are also discussed in this paper.

  18. Drop Your Tools: An Allegory for Organizational Studies.

    Science.gov (United States)

    Weick, Karl E.

    1996-01-01

    Ponders the failure of 27 wildland firefighters to drop their tools and outrun an exploding fire, using explanations developed by James D. Thompson, first editor of "Administrative Science Quarterly." Organization scholars are in analogous threatened positions; they too seem to be keeping their heavy tools and falling behind. Reaffirming…

  19. Influence of Floating Monitoring Platform Structure on the Hydrostatic Characteristics

    Directory of Open Access Journals (Sweden)

    Su Feng

    2015-01-01

    Full Text Available According to the environment and work styles, the underwater monitoring devices can be divided into three type, fixed monitoring device, the floating monitoring device and mobile monitoring device. Floating monitoring platform is a new type of monitoring device of the floating monitoring device, which is mainly used for underwater video monitoring of pool. as the floating platform monitoring in water motion and hydrostatic characteristics are closely related, the influent of counterweight, weight distance and floating body diameter of the structure parameters on its hydrostatic characteristics and the natural periods for roll, pitch and heave should be considered, In this work, the floating body diameter influent most, the counterweight followed, and the structure parameters have different influence on the natural periods for roll, pitch and heave , it need to be analyzed according to the concrete structure parameters.

  20. When chromatin organisation floats astray: the Srcap gene and Floating-Harbor syndrome.

    Science.gov (United States)

    Messina, Giovanni; Atterrato, Maria Teresa; Dimitri, Patrizio

    2016-12-01

    Floating-Harbor syndrome (FHS) is a rare human disease characterised by delayed bone mineralisation and growth deficiency, often associated with mental retardation and skeletal and craniofacial abnormalities. FHS was first described at Boston's Floating Hospital 42 years ago, but the causative gene, called Srcap, was identified only recently. Truncated SRCAP protein variants have been implicated in the mechanism of FHS, but the molecular bases underlying the disease must still be elucidated and investigating the molecular defects leading to the onset of FHS remains a challenge. Here we comprehensively review recent work and provide alterative hypotheses to explain how the Srcap truncating mutations lead to the onset of FHS.

  1. Sequential multi-drop coating method for large crystallized α-(NH2)2CHPbI3 and mixed-organic-cation perovskite films for highly efficient mesoscopic perovskite solar cells

    Science.gov (United States)

    Zhao, Yanhong; Xu, Xin; Zhang, Huiyin; Shi, Jiangjian; Zhu, Lifeng; Wu, Huijue; Li, Dongmei; Luo, Yanhong; Meng, Qingbo

    2017-08-01

    A simplified multi-drop coating method that improves the grain size and film quality is introduced to construct and stabilize a pure α-phase formamidinium (FA) lead iodide ((NH2)2CHPbI3, FAPbI3) perovskite layer. The developed method is then extended to fabricate an FA and methylammonium (MA) (FA/MA) mixed cation perovskite film under ambient conditions. The acquired FAPbI3 film contains micron-sized large grains with preferred [111] orientation, which dramatically reduced the grain boundary area and the associated charge recombination to provide high short-circuit current densities and power conversion efficiencies (PCE) of up to 23.86 mA cm-2 and 17.66%, respectively. The open-circuit voltage of the device and the efficiency are further improved after extending this method to the FA/MA mixed perovskite film. Finally, the highest PCE reached 19.3%.

  2. Trident: An FPGA Compiler Framework for Floating-Point Algorithms.

    Energy Technology Data Exchange (ETDEWEB)

    Tripp J. L. (Justin L.); Peterson, K. D. (Kristopher D.); Poznanovic, J. D. (Jeffrey Daniel); Ahrens, C. M. (Christine Marie); Gokhale, M. (Maya)

    2005-01-01

    Trident is a compiler for floating point algorithms written in C, producing circuits in reconfigurable logic that exploit the parallelism available in the input description. Trident automatically extracts parallelism and pipelines loop bodies using conventional compiler optimizations and scheduling techniques. Trident also provides an open framework for experimentation, analysis, and optimization of floating point algorithms on FPGAs and the flexibility to easily integrate custom floating point libraries.

  3. Implementing decimal floating-point arithmetic through binary: some suggestions

    OpenAIRE

    Brisebarre, Nicolas; Ercegovac, Milos; Louvet, Nicolas; Martin-Dorel, Erik; Muller, Jean-Michel; Panhaleux, Adrien

    2010-01-01

    International audience; We propose several algorithms and provide some related results that make it possible to implement decimal floating-point arithmetic on a processor that does not have decimal operators, using the available binary floating-point functions. In this preliminary study, we focus on round-to-nearest mode only. We show that several functions in decimal32 and decimal64 arithmetic can be implemented using binary64 and binary128 floating-point arithmetic, respectively. Specifical...

  4. Blueberry fruit drop associated virus: A new member of the family Caulimoviridae isolated from blueberry exhibiting fruit drop symptoms

    Science.gov (United States)

    This study describes the nucleotide sequence and genome organization of a new DNA virus isolated from ‘Bluecrop’ blueberry plants named Blueberry fruit drop associated virus (BFDaV). Infected bushes lose nearly 100% of their fruit prior to harvest, and in springtime young leaves and flowers develop ...

  5. Measuring Turbulence Mixing in Indonesian Seas Using Microstructure EM-APEX Floats

    Science.gov (United States)

    2016-04-18

    hour per response, including the t ime for rev iewing instructions, searching existing data sources, gathering and mainta ining the data needed, and...ES) 8. PERFORMING ORGANIZATION Columbia University REPORT NUMBER Lamont-Doherty Earth Observatory GGOI0736 61 Route 9W Palisades, NY I 0964 9...Measuring Turbulence Mixing in Indonesian Seas Using Microstructure EM- APEX Floats Arnold L. Gordon Lamont-Doherty Earth Observatory 61 Route 9W

  6. Oxygen Distribution and Potential Ammonia Oxidation in Floating, Liquid Manure Crusts

    DEFF Research Database (Denmark)

    Nielsen, Daniel Aagren; Nielsen, Lars Peter; Schramm, Andreas;

    2010-01-01

    Floating, organic crusts on liquid manure, stored as a result of animal production, reduce emission of ammonia (NH3) and other volatile compounds during storage. The occurrence of NO2- and NO3- in the crusts indicate the presence of actively metabolizing NH3 oxidizing bacteria (AOB) which may...... microorganisms, including AOB. The microbial activity may thus contribute to a considerable reduction of ammonia emissions from slurry tanks with well-developed crusts....

  7. Interpretation of IEEE-854 floating-point standard and definition in the HOL system

    Science.gov (United States)

    Carreno, Victor A.

    1995-01-01

    The ANSI/IEEE Standard 854-1987 for floating-point arithmetic is interpreted by converting the lexical descriptions in the standard into mathematical conditional descriptions organized in tables. The standard is represented in higher-order logic within the framework of the HOL (Higher Order Logic) system. The paper is divided in two parts with the first part the interpretation and the second part the description in HOL.

  8. Oxygen Distribution and Potential Ammonia Oxidation in Floating, Liquid Manure Crusts

    DEFF Research Database (Denmark)

    Nielsen, Daniel Aagren; Nielsen, Lars Peter; Schramm, Andreas

    2010-01-01

    Floating, organic crusts on liquid manure, stored as a result of animal production, reduce emission of ammonia (NH3) and other volatile compounds during storage. The occurrence of NO2- and NO3- in the crusts indicate the presence of actively metabolizing NH3 oxidizing bacteria (AOB) which may...... microorganisms, including AOB. The microbial activity may thus contribute to a considerable reduction of ammonia emissions from slurry tanks with well-developed crusts....

  9. Statistical analysis of the metrological properties of float glass

    Science.gov (United States)

    Yates, Brian W.; Duffy, Alan M.

    2008-08-01

    The radius of curvature, slope error, surface roughness and associated height distribution and power spectral density of uncoated commercial float glass samples have been measured in our Canadian Light Source Optical Metrology Facility, using our Micromap-570 surface profiler and long trace profilometer. The statistical differences in these parameters have been investigated between the tin and air sides of float glass. The effect of soaking the float glass in sulfuric acid to try to dissolve the tin contamination has also been investigated, and untreated and post-treatment surface roughness measurements compared. We report the results of our studies on these float glass samples.

  10. FORMULATION AND EVALUATION OF FLOATING TABLETS OF NORFLOXACIN

    Directory of Open Access Journals (Sweden)

    Ms. Jyoti Rathore

    2015-01-01

    Full Text Available The oral route is considered as the most promising route of drug delivery. Several approaches have been attempted in the preparation of gastro-retentive drug delivery systems. These include floating systems, swell able and expandable systems, high density systems, bioadhesive systems, altered shape systems, gel forming solution or suspension systems and sachet systems. Various approaches have been followed to encourage gastric retention of an oral dosage form. Floating systems have low bul density so that they can float on the gastric juice in the stomach. The problem arises when the stomach is completely emptied of gastric fluid. In such a situation, there is nothing to float on.

  11. Herbal carrier-based floating microparticles of diltiazem ...

    African Journals Online (AJOL)

    Various physicochemical properties of the floating microspheres were characterized, including ... Keywords: Diltiazem, Cardiac disease, Psyllium husk, Sodium alginate, Microsphere, Microparticle,. Controlled ..... solvent removal methods.

  12. Influence of artificial ecological floating beds on river hydraulic characteristics

    Institute of Scientific and Technical Information of China (English)

    饶磊; 钱进; 敖燕辉

    2014-01-01

    The artificial ecological floating bed is widely used in rivers and lakes to repair and purify polluted water. However, the water flow pattern and the water level distribution are significantly changed by the floating beds, and the influence on the water flow is different from that of aquatic plants. In this paper, based on the continuous porous media model, a moveable two-layer combination model is built to describe the floating bed. The influences of the floating beds on the water flow characteristics are studied by numerical simulations and experiments using an experimental water channel. The variations of the water level distribution are discussed under conditions of different flow velocities ( v=0.1 m/s, 0.2 m/s, 0.30 m/s, 0.4 m/s), floating bed coverage rates (20%, 40%, 60%) and arrangement positions away from the channel wall ( D=0 m, 0.1 m, 0.2 m). The results indicate that the flow velocity increases under the floating beds, and the water level rises significantly under high flow velocity conditions in the upstream region and the floating bed region. In addition, the average rising water level value (ARWLV) increases significantly with the increase of the floating bed coverage rate, and the arrangement position of floating beds in the river can also greatly influence the water level distribution under a high-flow velocity condition (v³0.2 m/s) .

  13. Critical point wetting drop tower experiment

    Science.gov (United States)

    Kaukler, W. F.; Tcherneshoff, L. M.; Straits, S. R.

    1984-01-01

    Preliminary results for the Critical Point Wetting CPW Drop Tower Experiment are produced with immiscible systems. Much of the observed phenomena conformed to the anticipated behavior. More drops will be needed to test the CPW theory with these immiscible systems.

  14. Egg Drop Competition Involving Only Toothpicks and Glue

    Science.gov (United States)

    Houpt, Stephen

    2004-04-01

    The Winston Science Egg Drop Competition is held annually in November, one of a large group of science competitions organized by Lehman Marks of the Winston School in Dallas, TX. The rules for the competition state that the egg package may be constructed of toothpicks and glue only, with a mass limit of 50 g, not including the egg. Once the egg is placed inside the package, it is dropped from a height of 8 m. The winning entry is the one that makes impact in the least amount of time while still protecting the egg. Timing is electronic.

  15. Fate of methane in aquatic systems dominated by free-floating plants.

    Science.gov (United States)

    Kosten, Sarian; Piñeiro, Marcia; de Goede, Eefje; de Klein, Jeroen; Lamers, Leon P M; Ettwig, Katharina

    2016-11-01

    Worldwide the area of free-floating plants is increasing, which can be expected to alter methane (CH4) emissions from aquatic systems in several ways. A large proportion of the CH4 produced may become oxidized below the plants due to the accumulation of CH4 as a result of a decrease in the diffusive water-atmosphere flux and the entrapment of part of the ebullitive CH4, in combination with suitable conditions for methane oxidizing (MOX) bacteria in the aerobic rhizosphere. We used a set of essays to test this hypothesis and to explore the effect of different densities for three widespread free-floating species: Azolla filiculoides, Salvinia natans, and Eichhornia crassipes. The gas exchange velocity, proportion of CH4 bubbles trapped by the plants, occurrence of radial oxygen loss from roots, and MOX rates on the roots were assessed. We subsequently used the outcome of these experiments to parameterize a simple model. With this model we estimated the proportion of the produced CH4 that is oxidized, for different plant species and different densities. We found that in a shallow (1 m) system up to 70% of the CH4 produced may become oxidized as a result of a strong decrease in gas exchange combined with high MOX activity of the rhizosphere microbiome. As floating plants also are likely to increase CH4 production by organic matter production, especially when their presence induces anaerobic conditions, the overall effect on CH4 emission will strongly depend on local conditions. This explains the contrasting effects of floating plants on CH4 emissions in literature as reviewed here. As the effect of floating plants on CH4 emissions, including the high MOX rates we show here, can be substantial, there is an urgent need to consider this impact when assessing greenhouse gas budgets. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Electrohydrodynamics of a particle-covered drop

    Science.gov (United States)

    Ouriemi, Malika; Vlahovska, Petia

    2014-11-01

    We study the dynamics of a drop nearly-completely covered with a particle monolayer in a uniform DC electric field. The weakly conducting fluid system consists of a silicon oil drop suspended in castor oil. A broad range of particle sizes, conductivities, and shapes is explored. In weak electric fields, the presence of particles increases drop deformation compared to a particle-free drop and suppresses the electrohydrodynamic flow. Very good agreement is observed between the measured drop deformation and the small deformation theory derived for surfactant-laden drops (Nganguia et al., 2013). In stronger electric fields, where drops are expected to undergo Quincke rotation (Salipante and Vlahovska, 2010), the presence of the particles greatly decreases the threshold for rotation and the stationary tilted drop configuration observed for clean drop is replaced by a spinning drop with either a wobbling inclination or a very low inclination. These behaviors resemble the predicted response of rigid ellipsoids in uniform electric fields. At even stronger electric fields, the particles can form dynamic wings or the drop implodes. The similar behavior of particle-covered and surfactant-laden drops provides new insights into understanding stability of Pickering emulsions. Supported by NSF-CBET 1437545.

  17. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Science.gov (United States)

    2010-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  18. Floating air riding seal for a turbine

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, Todd A

    2016-08-16

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

  19. An integrated circuit floating point accumulator

    Science.gov (United States)

    Goldsmith, T. C.

    1977-01-01

    Goddard Space Flight Center has developed a large scale integrated circuit (type 623) which can perform pulse counting, storage, floating point compression, and serial transmission, using a single monolithic device. Counts of 27 or 19 bits can be converted to transmitted values of 12 or 8 bits respectively. Use of the 623 has resulted in substantial savaings in weight, volume, and dollar resources on at least 11 scientific instruments to be flown on 4 NASA spacecraft. The design, construction, and application of the 623 are described.

  20. Rounding in redundant digit floating point system

    Science.gov (United States)

    Fahmy, Hossam A. H.; Flynn, Michael J.

    2003-12-01

    Redundant representations are used to increase the performance of arithmetic units. If redundancy is eliminated, the bits needed to represent a number may increase or decrease depending on the type of redundancy used. In such a redundant representation, finding the exact location and correct decision for rounding without eliminating the redundancy or loosing its performance gains is difficult. This paper discusses the different issues related to rounding in redundant systems. It also presents a solution that was used to maintain the gains of redundancy in a floating point unit while correctly implementing the IEEE rounding modes.

  1. Wave attenuation charcteristics of tethered float system

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.

    with increase 04 0.8 I 0.9 I.‘0 I!1 I 1.2 I 1.3 11.4 11.5 I!6 1.7 R(m)- Fig 7 (a). Variation of wave power and drag power with float size. t t 0 I I I I I I I I I 2 X-x /x-x-x--* Q) a- aD d x/x’ b 0- X’ (D y/ u) 6 t, 0 IQ_ d :- ? 0 9, 0...

  2. Floating Foundations for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Andersen, Morten Thøtt

    The concept of harnessing the power of the wind dates all the way back to the first ships traversing the seas. Later, windmills enabled the use of wind power for industrial purposes. Since then, technology has allowed the production of clean renewable energy through the use of wind turbines......-scale prototypes to full-scale pre-commercial wind parks. This thesis explores different aspects of numerical and physical modeling of floating offshore wind turbines. Numerical investigations, validated by physical test data, are used to highlight some of the implications of modeling these highly coupled aero...

  3. IMPACT OF HEAVY METAL TO FISH AQUACULTURE IN FLOATING NET CAGE IN CIRATA RESERVOIR, INDONESIA

    Directory of Open Access Journals (Sweden)

    Tri Heru Prihadi

    2008-06-01

    Full Text Available Utilization of Cirata Reservoir for fisheries aquaculture with floating net cage system has been increasing rapidly. Industrial waste existed along watershed brings significant heavy metal pollutant that flows and difficult to control. Consequences of such activities were reflected in the degradation of reservoir environment indicated by sedimentation, water quality degradation and fish mass mortality because of up welling. The objectives of this research were: 1 to obtain data and information on heavy metal content in Cirata Reservoir waters, and 2 to observe and understand the effect of heavy metal to the fish cultured in floating net cage to support aquaculture in floating net cage system. Water quality and fish histology analyses were the methodologies used in this research. Descriptive and laboratory analysis were carry out to analysis the data. Based on observation and descriptive analyses, the content of heavy metal in Cirata Reservoir was classified as worse. Concentration of Pb, Cr, Hg, and Cd in the sample of water and tilapia digestive organ becomes fragile. Infiltration of hemoglobin cell, necrosis, degeneration and pigmentation occurred in body organs when up welling happened. Beside that, during up-welling digestive organ become easily breakable resulted in fish mass mortality in floating net cage. The affinity of hemoglobin to the toxic gas was higher than to oxygen, therefore aeration was not affective and mass mortality cannot be avoided. This was because of various events that occured to the fish and the other water biota that encompassed regular diffusion, bio-magnification, and bio-concentration to fish.

  4. A Novel Virus Causes Scale Drop Disease in Lates calcarifer.

    Directory of Open Access Journals (Sweden)

    Ad de Groof

    2015-08-01

    Full Text Available From 1992 onwards, outbreaks of a previously unknown illness have been reported in Asian seabass (Lates calcarifer kept in maricultures in Southeast Asia. The most striking symptom of this emerging disease is the loss of scales. It was referred to as scale drop syndrome, but the etiology remained enigmatic. By using a next-generation virus discovery technique, VIDISCA-454, sequences of an unknown virus were detected in serum of diseased fish. The near complete genome sequence of the virus was determined, which shows a unique genome organization, and low levels of identity to known members of the Iridoviridae. Based on homology of a series of putatively encoded proteins, the virus is a novel member of the Megalocytivirus genus of the Iridoviridae family. The virus was isolated and propagated in cell culture, where it caused a cytopathogenic effect in infected Asian seabass kidney and brain cells. Electron microscopy revealed icosahedral virions of about 140 nm, characteristic for the Iridoviridae. In vitro cultured virus induced scale drop syndrome in Asian seabass in vivo and the virus could be reisolated from these infected fish. These findings show that the virus is the causative agent for the scale drop syndrome, as each of Koch's postulates is fulfilled. We have named the virus Scale Drop Disease Virus. Vaccines prepared from BEI- and formalin inactivated virus, as well as from E. coli produced major capsid protein provide efficacious protection against scale drop disease.

  5. Drop shaping by laser-pulse impact

    CERN Document Server

    Klein, Alexander L; Visser, Claas Willem; Lhuissier, Henri; Sun, Chao; Snoeijer, Jacco H; Villermaux, Emmanuel; Lohse, Detlef; Gelderblom, Hanneke

    2015-01-01

    We study the hydrodynamic response of a falling drop hit by a laser pulse. Combining high-speed with stroboscopic imaging we report that a millimeter-sized dyed water drop hit by a milli-Joule nanosecond laser-pulse deforms and propels forward at several meters per second, until it eventually fragments. We show that the drop motion results from the recoil momentum imparted at the drop surface by water vaporization. We measure the propulsion speed and the time-deformation law of the drop, complemented by boundary integral simulations. We explain the drop propulsion and shaping in terms of the laser pulse energy and drop surface tension. These findings are crucial for the generation of extreme ultraviolet (EUV) light in lithography machines.

  6. A laboratory study of floating lenticular anticyclones

    Science.gov (United States)

    Le Gal, Patrice; de La Rosa, Hector; Cros, Anne; Cruz-Gomez, Raúl; Le Bars, Michael

    2014-11-01

    Oceanic vortices play an important role in the redistribution of heat, salt and momentum in the oceans. Among these vortices, floating lenses or rings are often met in the meanders of warm currents. For instance the North Brazil Current rings are among the most intense and large anticyclonic vortices on Earth. In order to better describe these vortices, we propose here a laboratory study of these floating anticyclonic lenses. A blob of fresh water is slowly injected near the surface of a rotating layer of homogeneous salted water. Because of the opposite effects of rotation that tends to generate columnar structures and density stratification that spreads light water on the surface, the vortices take a finite size three dimensionnal typical shape. Visualization and PIV measurements of the shape, aspect ratios and vorticity profiles are compared to analytical predictions that use first a simple solid body rotation model and then a more realistic isolated Gaussian vorticity field inside the anticyclones. This work was carried out within the framework of a bilateral cooperation between CNRS (France) and CONACYT (Mexico).

  7. High-Rate Capable Floating Strip Micromegas

    CERN Document Server

    Bortfeldt, Jonathan; Biebel, Otmar; Danger, Helge; Flierl, Bernhard; Hertenberger, Ralf; Lösel, Philipp; Moll, Samuel; Parodi, Katia; Rinaldi, Ilaria; Ruschke, Alexander; Zibell, André

    2015-01-01

    We report on the optimization of discharge insensitive floating strip Micromegas (MICRO-MEsh GASeous) detectors, fit for use in high-energy muon spectrometers. The suitability of these detectors for particle tracking is shown in high-background environments and at very high particle fluxes up to 60MHz/cm$^2$. Measurement and simulation of the microscopic discharge behavior have demonstrated the excellent discharge tolerance. A floating strip Micromegas with an active area of 48cm$\\times$50cm with 1920 copper anode strips exhibits in 120GeV pion beams a spatial resolution of 50$\\mu$m at detection efficiencies above 95%. Pulse height, spatial resolution and detection efficiency are homogeneous over the detector. Reconstruction of particle track inclination in a single detector plane is discussed, optimum angular resolutions below $5^\\circ$ are observed. Systematic deviations of this $\\mu$TPC-method are fully understood. The reconstruction capabilities for minimum ionizing muons are investigated in a 6.4cm$\\time...

  8. Evaporation mitigation by floating modular devices

    Science.gov (United States)

    Hassan, M. M.; Peirson, W. L.

    2016-05-01

    Prolonged periods of drought and consequent evaporation from open water bodies in arid parts of Australia continue to be a threat to water availability for agricultural production. Over many parts of Australia, the annual average evaporation exceeds the annual precipitation by more than 5 times. Given its significance, it is surprising that no evaporation mitigation technique has gained widespread adoption to date. High capital and maintenance costs of manufactured products are a significant barrier to implementation. The use of directly recycled clean plastic containers as floating modular devices to mitigate evaporation has been investigated for the first time. A six-month trial at an arid zone site in Australia of this potential cost effective solution has been undertaken. The experiment was performed using clean conventional drinking water bottles as floating modules on the open water surface of 240-L tanks with three varying degrees of covering (nil, 34% and 68%). A systematic reduction in evaporation is demonstrated during the whole study period that is approximately linearly proportional to the covered surface. These results provide a potential foundation for robust evaporation mitigation with the prospect of implementing a cost-optimal design.

  9. Externalities, Floating Population and Spatial Agglomeration

    Institute of Scientific and Technical Information of China (English)

    Du Yu; Wang Chuansheng; Fan Jie

    2007-01-01

    With the further development of socialist market economy,the mobility of factor markets in China,especially the labor market.is strengthened.Extemalities interacts with the agglomeration of productive factors.Under the framework of new economic geographg this article presents a theoretical model involving the endogenous population density affected by urban externalities.Results show that the population density is more concentrated around the center because the degree and extent of interaction between individuals intensifies when the distance from the center decreases.When there are several extemalifies resonurces,the aggregation of externalities changes the configuration of spatial factor allocation.These results fit well with the empirical facts about the decreasing density of floating population along the cities of Guangzhou,Dongguan and Shenzhen in Guangdong Province which is situat d in the eastern coast of the Pearl River Delta.We find that under the impacts of externalities released from Hong Kong into the coast,floating population Was more concentrated around Shenzhen and Dongguan,which are more adjacent to Hong Kong compared with Guangzhou City.

  10. Treatment of Floating Knee Injury in Children

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The necessity and superiority of the surgical operation on children with floating knee injury and the fracture union and complications were investigated. Twenty-eight children with floating knee injury were subjected to open reduction and internal fixation or external fixator. The patients were followed up for 18 months to 7 years. The curative effectiveness was scored by Karlstrom criteria. The results showed that no nonunion or deformity was found. The affected limb was 1.2 cm to 1.5 cm longer in 2 cases, 0.8 to 1.2 cm shorter in 3 cases than the contralateral. No severe dysfunction of knee joint occurred. The excellent-good rate was 92.8 % and the curative rate 71.4 % respectively. So for children whose age is older than 5 years, it's a good way to treat the fractures of femur and tibia with open reduction and internal fixation or external fixator. The method can be advantageous for the nursing care, early function recovery, shortening of the hospital stay and avoidance of severe complications.

  11. FPGA Based Quadruple Precision Floating Point Arithmetic for Scientific Computations

    Directory of Open Access Journals (Sweden)

    Mamidi Nagaraju

    2012-09-01

    Full Text Available In this project we explore the capability and flexibility of FPGA solutions in a sense to accelerate scientific computing applications which require very high precision arithmetic, based on IEEE 754 standard 128-bit floating-point number representations. Field Programmable Gate Arrays (FPGA is increasingly being used to design high end computationally intense microprocessors capable of handling floating point mathematical operations. Quadruple Precision Floating-Point Arithmetic is important in computational fluid dynamics and physical modelling, which require accurate numerical computations. However, modern computers perform binary arithmetic, which has flaws in representing and rounding the numbers. As the demand for quadruple precision floating point arithmetic is predicted to grow, the IEEE 754 Standard for Floating-Point Arithmetic includes specifications for quadruple precision floating point arithmetic. We implement quadruple precision floating point arithmetic unit for all the common operations, i.e. addition, subtraction, multiplication and division. While previous work has considered circuits for low precision floating-point formats, we consider the implementation of 128-bit quadruple precision circuits. The project will provide arithmetic operation, simulation result, hardware design, Input via PS/2 Keyboard interface and results displayed on LCD using Xilinx virtex5 (XC5VLX110TFF1136 FPGA device.

  12. Comments on the floating body and the hyperplane conjecture

    CERN Document Server

    Fresen, Daniel

    2011-01-01

    We provide upper and lower bounds on the logarithmic Hausdorff distance between an arbitrary convex body $K\\subset \\mathbb{R}^{d}$\\ and the convex floating body $K_{\\delta}$ inside $K$. We also discuss the hyperplane conjecture (the slicing problem) and provide a reformulation of this famous unsolved mystery in terms of the floating body.

  13. UFO: "Unidentified" Floating Object Driven by Thermocapillarity

    OpenAIRE

    Zhao, Yuejun; Chen, Chuan-Hua

    2010-01-01

    In this fluid dynamics video, we show thermocapillary actuation of a binary drop of water and heptanol where the binary drop in motion takes on a UFO-like shape. On a parylene-coated silicon surface subjected to a linear temperature gradient, a pure heptanol droplet quickly moves to the cold side by the Marangoni stress, while a pure water droplet remains stuck due to a large contact angle hysteresis. When the water droplet was encapsulated by a thin layer of heptanol and thermally actuated, ...

  14. STUDY ON THE GXD FLOAT VALVE TRAY WITH DOUBLE FLOW GUIDE%GXD型复式导流浮阀塔板的研究

    Institute of Scientific and Technical Information of China (English)

    高有飞

    2012-01-01

    The hydrodynamic performance of GXD float valve tray with double flow guide was studied using a synthetic glass rectangular towerd 000 mm×400 mm) device, and compared with DL float valve tray with flow guide and Fl float valve tray at the same opening porosity. Results show that GXD float valve tray displays good hydrodynamic performance,under the same gas velocity as compared with Fl float valve tray,its pressure drop is 25% lower and process capacity is more than 35% higher; its efficiency is about 15% higher than that of DL float valve tray. Even though the minimum operation limit for leakage intensity of GXD float valve tray is a bit higher than the others,distillation tower with GXD float valve tray exhibits not only low pressure drop,but also high operation efficiency and high distilled yield of light fractions.%在1 000 mm×400 mm有机玻璃方塔试验装置上考察GXD型复式导流浮阀塔板的流体力学性能,并在相同开孔率下与DL型导流浮阀塔板、F1型浮阀塔板的流体力学性能进行对比.结果表明:GXD型复式导流浮阀塔板具有良好的流体力学性能,相同气速下与F1型浮阀塔板相比,其压降降低约25%,处理能力提高约35%以上;与DL型浮阀塔板相比其效率提高约15%.虽然GXD型浮阀塔板泄漏强度的操作下限与其它浮阀塔板相比偏高,但该塔板不仅能降低分馏塔的压降,还可以提高操作效率和轻质油拔出率.

  15. Balloon Pump with Floating Valves for Portable Liquid Delivery

    Directory of Open Access Journals (Sweden)

    Yuya Morimoto

    2016-03-01

    Full Text Available In this paper, we propose a balloon pump with floating valves to control the discharge flow rates of sample solutions. Because the floating valves were made from a photoreactive resin, the shapes of the floating valves could be controlled by employing different exposure patterns without any change in the pump configurations. Owing to the simple preparation process of the pump, we succeeded in changing the discharge flow rates in accordance with the number and length of the floating valves. Because our methods could be used to easily prepare balloon pumps with arbitrary discharge properties, we achieved several microfluidic operations by the integration of the balloon pumps with microfluidic devices. Therefore, we believe that the balloon pump with floating valves will be a useful driving component for portable microfluidic systems.

  16. Electrowetting in a water droplet with a movable floating substrate

    Science.gov (United States)

    Shahzad, Amir; Masud, A. R.; Song, Jang-Kun

    2016-05-01

    Electrowetting (EW) enables facile manipulation of a liquid droplet on a hydrophobic surface. In this study, manipulation of an electrolyte droplet having a small floating object on it was investigated on a solid hydrophobic substrate under the EW process. Herein, the floating object exhibited a vertical motion under an applied electric field owing to the spreading and contraction of the droplet on its connecting substrates. The field-induced height variation of the floating object was significantly influenced by the thicknesses of the dielectric and hydrophobic materials. A small mass was also placed on the top floating object and its effect on the spreading of the droplet was observed. In this system, the height of the top floating object is precisely controllable under the application of an electric voltage. The proposed system is expected to be highly useful in the design of nano- and micro-oscillatory systems for microengineering.

  17. Characterization of Floating Surface Layers of Lipids and Lipopolymers by Surface-Sensitive Scattering

    Science.gov (United States)

    Krüger, Peter; Lösche, Mathias

    Nanotechnology and molecular (bio-)engineering are making ever deepening inroads into everybodys daily life. Physicochemical and biotechnological achievements in the design of physiologically active supramolecular assemblies have brought about the quest for their submolecular-level characterization. We employ surface-sensitive scattering techniques for the investigation of planar lipid membranes - floating monolayers on aqueous surfaces - to correlate structural, functional and dynamic aspects of biomembrane models. This chapter surveys recent work on the submolecular structure of floating phospholipid monolayers - where the advent of third-generation synchrotron X-ray sources has driven the development of realistic, submolecular-scale quasi-chemical models - as well as of more complex systems: cation binding to anionic lipid surfaces; conformational changes of lipopolymers undergoing phase transitions; the conformational organization of phosphatidylinositol and phosphatidylinositides, as examples of physiologically important lipids; and the adsorption of peptides (neuropeptide Y, NPY) or solvents (dimethylsulfoxide, DMSO) onto phospholipid surface layers.

  18. Boring crustaceans damage polystyrene floats under docks polluting marine waters with microplastic.

    Science.gov (United States)

    Davidson, Timothy M

    2012-09-01

    Boring isopods damage expanded polystyrene floats under docks and, in the process, expel copious numbers of microplastic particles. This paper describes the impacts of boring isopods in aquaculture facilities and docks, quantifies and discusses the implications of these microplastics, and tests if an alternate foam type prevents boring. Floats from aquaculture facilities and docks were heavily damaged by thousands of isopods and their burrows. Multiple sites in Asia, Australia, Panama, and the USA exhibited evidence of isopod damage. One isopod creates thousands of microplastic particles when excavating a burrow; colonies can expel millions of particles. Microplastics similar in size to these particles may facilitate the spread of non-native species or be ingested by organisms causing physical or toxicological harm. Extruded polystyrene inhibited boring, suggesting this foam may prevent damage in the field. These results reveal boring isopods cause widespread damage to docks and are a novel source of microplastic pollution.

  19. Leidenfrost drops on a heated liquid pool

    Science.gov (United States)

    Maquet, L.; Sobac, B.; Darbois-Texier, B.; Duchesne, A.; Brandenbourger, M.; Rednikov, A.; Colinet, P.; Dorbolo, S.

    2016-09-01

    We show that a volatile liquid drop placed at the surface of a nonvolatile liquid pool warmer than the boiling point of the drop can be held in a Leidenfrost state even for vanishingly small superheats. Such an observation points to the importance of the substrate roughness, negligible in the case considered here, in determining the threshold Leidenfrost temperature. A theoretical model based on the one proposed by Sobac et al. [Phys. Rev. E 90, 053011 (2014), 10.1103/PhysRevE.90.053011] is developed in order to rationalize the experimental data. The shapes of the drop and of the liquid substrate are analyzed. The model notably provides scalings for the vapor film thickness profile. For small drops, these scalings appear to be identical to the case of a Leidenfrost drop on a solid substrate. For large drops, in contrast, they are different, and no evidence of chimney formation has been observed either experimentally or theoretically in the range of drop sizes considered in this study. Concerning the evaporation dynamics, the radius is shown to decrease linearly with time whatever the drop size, which differs from the case of a Leidenfrost drop on a solid substrate. For high superheats, the characteristic lifetime of the drops versus the superheat follows a scaling law that is derived from the model, but, at low superheats, it deviates from this scaling by rather saturating.

  20. Stormwater nitrogen removal performance of a floating treatment wetland.

    Science.gov (United States)

    Borne, Karine E; Tanner, Chris C; Fassman-Beck, Elizabeth A

    2013-01-01

    The nitrogen (N) removal efficiency and effluent quality of two parallel stormwater retention ponds, one retrofitted with a floating treatment wetland (FTW) and one without any vegetation, was compared in a field trial. This study shows that inclusion of FTWs in stormwater retention ponds has potential to moderately improve N removal. Median FTW outlet event mean concentrations (EMCs) were lower than median inlet and control pond outlet EMCs for all species of N, except for NH(4)-N. Performance was statistically better from late spring to end autumn due to higher organic nitrogen (ON) removal and denitrification in presence of the FTW. Low dissolved oxygen (DO), higher temperature and increased organic matter (OM) and microbial activity below the FTW, likely facilitated the higher denitrification rates observed over this period. Greater sediment N accumulation in the FTW pond also contributed to its higher overall N removal. Higher OM availability in the FTW pond due to release of root exudates and supply of detritus from plant die-back may have contributed to floc formation in the water column, increasing particulate ON settlement. Enhanced ON mineralisation may also be responsible but was probably limited in summer due to the low DO induced by the FTW. Direct uptake by the plants appears to be of less importance.

  1. Building water bridges in air: Electrohydrodynamics of the Floating Water Bridge

    CERN Document Server

    Marin, Alvaro G

    2010-01-01

    The interaction of electrical fields and liquids can lead to phenomena that defies intuition. Some famous examples can be found in Electrohydrodynamics as Taylor cones, whipping jets or non-coalescing drops. A less famous example is the Floating Water Bridge: a slender thread of water held between two glass beakers in which a high voltage difference is applied. Surprisingly, the water bridge defies gravity even when the beakers are separated at distances up to 2 cm. In the presentation, experimental measurements and simple models are proposed and discussed for the stability of the bridge and the source of the flow, revealing an important role of polarization forces on the stability of the water bridge. On the other hand, the observed flow can only be explained due to the non negligible free charge present in the surface. In this sense, the Floating Water Bridge can be considered as an extreme case of a leaky dielectric liquid (J. R. Melcher and G. I. Taylor, Annu. Rev. Fluid Mech., 1:111, 1969).

  2. Determination of Trace Nitrite in Water by Spectrophotometry with Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop Enrichment%凝固-漂浮分散液液微萃取富集-分光光度法测定水中亚硝酸根

    Institute of Scientific and Technical Information of China (English)

    丁宗庆; 刘光东

    2016-01-01

    研究了凝固-漂浮分散液液微萃取(SFO-DLLME)-分光光度法测定水样中痕量亚硝酸根的方法.以1-十二醇为萃取剂,乙醇为分散剂进行分散液液微萃取,离心后通过冷冻凝固操作使漂浮的萃取剂和水相分离.最佳实验条件下,方法的线性范围为2.0~280 μg/L(r=0.9999),检出限为0.34 μg/L.方法已成功应用于环境水样分析,相对标准偏差在2.4%~3.3%,加标回收率在98.2%~102.4%.

  3. Determination of Trace Zinc in Water by Dispersive Liquid-liquid Microextraction Based on Solidification of Floating Organic Drop Coupled with Spectrophotometry%悬浮固化分散液液微萃取光度法测定痕量锌

    Institute of Scientific and Technical Information of China (English)

    叶青; 陈宗保; 洪利明; 刘林海

    2015-01-01

    采用悬浮固化分散液液微萃取(DLLME-SFO)分光光度法测定水样中痕量锌.以1-(2-吡啶偶氮)-2-萘酚(PAN)为配位剂,密度小于水,凝固点为24℃的十二醇为萃取剂,乙醇为分散剂,对水样进行分散液液微萃取.对萃取剂和分散剂的类型和体积、溶液的pH、PAN的用量、萃取时间等参数进行了优化.方法的线性范围5.0~800μg/L,检出限0.62μg/L,富集倍数50倍,应用于测定水样中痕量锌,回收率为96%~98.7%.

  4. Rapid Determination of Seven Naphthalenediols with Vortex-assisted Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop and High Performance Liquid Chromatography%涡旋辅助分散液液微萃取-悬浮固化/高效液相色谱法测定水样中7种萘二酚

    Institute of Scientific and Technical Information of China (English)

    许丽珠; 李秀英; 冼燕萍; 何敏恒; 方军; 黄金凤; 郭新东

    2015-01-01

    建立了水样中7种萘二酚的涡旋辅助分散液液微萃取-悬浮固化/高效液相色谱(VA-DLLME-SFO/HPLC)测定方法.以乙醚-十二醇为二元微萃取剂,通过涡旋分散方式协同萃取水样中的目标化合物,采用C18色谱柱分离,HPLC测定.优化了萃取剂及用量、萃取时间、氯化钠用量等条件.最佳萃取条件为:萃取剂为100 μL乙醚和50μL十二醇,氯化钠用量为0.2 g/mL,涡旋萃取3 min.在优化条件下,7种萘二酚在一定质量浓度范围内线性关系良好,相关系数均大于0.997,方法检出限(S/N=3)为1.7~6.0 μg/L;3个加标水平下的平均回收率为82.1%~106.0%,日内相对标准偏差(RSD,n=5)为1.2%~4.1%;中间添加水平的日间RSD(n =5)为2.5% ~5.7%.该方法前处理简单,涡旋分散大大提高了物质传质速率,增大了萃取效率,缩短了萃取时间,是一种适用于水样中萘二酚类物质富集检测的绿色方法.

  5. Discrete Element Modelling of Floating Debris

    Science.gov (United States)

    Mahaffey, Samantha; Liang, Qiuhua; Parkin, Geoff; Large, Andy; Rouainia, Mohamed

    2016-04-01

    Flash flooding is characterised by high velocity flows which impact vulnerable catchments with little warning time and as such, result in complex flow dynamics which are difficult to replicate through modelling. The impacts of flash flooding can be made yet more severe by the transport of both natural and anthropogenic debris, ranging from tree trunks to vehicles, wheelie bins and even storage containers, the effects of which have been clearly evident during recent UK flooding. This cargo of debris can have wide reaching effects and result in actual flood impacts which diverge from those predicted. A build-up of debris may lead to partial channel blockage and potential flow rerouting through urban centres. Build-up at bridges and river structures also leads to increased hydraulic loading which may result in damage and possible structural failure. Predicting the impacts of debris transport; however, is difficult as conventional hydrodynamic modelling schemes do not intrinsically include floating debris within their calculations. Subsequently a new tool has been developed using an emerging approach, which incorporates debris transport through the coupling of two existing modelling techniques. A 1D hydrodynamic modelling scheme has here been coupled with a 2D discrete element scheme to form a new modelling tool which predicts the motion and flow-interaction of floating debris. Hydraulic forces arising from flow around the object are applied to instigate its motion. Likewise, an equivalent opposing force is applied to fluid cells, enabling backwater effects to be simulated. Shock capturing capabilities make the tool applicable to predicting the complex flow dynamics associated with flash flooding. The modelling scheme has been applied to experimental case studies where cylindrical wooden dowels are transported by a dam-break wave. These case studies enable validation of the tool's shock capturing capabilities and the coupling technique applied between the two numerical

  6. Karakteristik Penderita Drop out Pengobatan Tuberkulosis Paru di Garut

    Directory of Open Access Journals (Sweden)

    Nevi Nurkomarasari

    2014-02-01

    Full Text Available Abstrak Tuberkulosis masih menjadi masalah penyakit infeksi di dunia termasuk di Indonesia. Walaupun penggunaan Directly Observed Treatment Shortcourse Chemotherapy (DOTS sebagai terapi yang direkomendasikan World Helath Organization (WHO dipergunakan, kasus drop out masih cukup tinggi. Penelitian ini dilakukan untuk menggambarkan faktor yang mempengaruhi kejadian drop out di Puskesmas Sukamerang, Garut selama tahun 2011. Penelitian ini menggunakan metode cross sectional dengan instrument penelitian berupa kuesioner yang didasarkan pada petunjuk perawatan TB yang diterbitkan oleh Kementrian Kesehatan. Subjek adalah semua penderita TB yang drop out selama pengobatan di Puskesmas Sukamerang, Garut sejumlah 30 orang. Analisis data dilakukan menggunakan statistical programme for social sciense (SPSS versi 17. Hasil penelitian menunjukkan bahwa pasien TB drop out adalah laki-laki dengan usia < 35 tahun, pendidikan tamat SMP, pendapatan di bawah upah minimum regional dan bekerja sebagai buruh. Tingkat pengetahuan tentang TB paru penderita drop out pengobatan TB paru dan sikap mereka termasuk kurang baik walaupun peran pengawas menelan obat (PMO telah cukup baik. Masalah tersebut ditambah dengan sulitnya akses menuju pelayanan kesehatan. Upaya penting dalam penanganan kasus TB adalah bagaimana memotivasi penderita agar mereka mau menyelesaikan pengobatan sesuai dengan program  yang ditetapkan. Untuk mewujudkan upaya tersebut, diharapkan program penanggulangan TB paru  dapat meningkatkan upaya penjaringan penderita TB paru dan meningkatkan strategi pelaksanaan pengobatan TB paru melalui penyebaran informasi tentang pengobatan TB paru dan peningkatan peranan PMO. Kata kunci: Drop out, pengetahuan dan sikap, tuberkulosis (TB   Characteristics of Drop Out Patients During Treatment of Pulmonary Tuberculosis in Garut Abstract Tuberculosis is still one of the major infectious disease in the world including Indonesia. Although the therapy using Directly

  7. Footprint Geometry and Sessile Drop Resonance

    Science.gov (United States)

    Chang, Chun-Ti; Daniel, Susan; Steen, Paul H.

    2016-11-01

    How does a sessile drop resonate if its footprint is square (square drop)? In this talk, we discuss the two distinct families of observed modes in our experiments. One family (spherical modes) is identified with the natural modes of capillary spherical caps, and the other (grid modes) with Faraday waves on a square bath (square Faraday waves). A square drop exhibits grid or spherical modes depending on its volume, and the two families of modes arise depending on how wavenumber selection of footprint geometry and capillarity compete. For square drops, a dominant effect of footprint constraint leads to grid modes which are constrained response; otherwise the drops exhibit spherical modes, the characteristic of sessile drops on flat plates. Chun-Ti Chang takes his new position at National Taiwan University on Aug. 15th, 2016. Until then, Chun-Ti Chang is affiliated with Technical University Dortmund, Germany.

  8. Sepsis from dropped clips at laparoscopic cholecystectomy

    Energy Technology Data Exchange (ETDEWEB)

    Hussain, Sarwat E-mail: sarwathussain@hotmail.com

    2001-12-01

    We report seven patients in whom five dropped surgical clips and two gallstones were visualized in the peritoneal cavity, on radiological studies. In two, subphrenic abscesses and empyemas developed as a result of dropped clips into the peritoneal cavity during or following laparoscopic cholecystectomy. In one of these two, a clip was removed surgically from the site of an abscess. In two other patients dropped gallstones, and in three, dropped clips led to no complications. These were seen incidentally on studies done for other indications. Abdominal abscess secondary to dropped gallstones is a well-recognized complication of laparoscopic cholecystectomy (LC). We conclude that even though dropped surgical clips usually do not cause problems, they should be considered as a risk additional to other well-known causes of post-LC abdominal sepsis.

  9. A Different Cone: Bursting Drops in Solids

    Science.gov (United States)

    Zhao, Xuanhe

    2013-03-01

    Drops in fluids tend to be spheres--a shape that minimizes surface energy. In thunderstorm clouds, drops can become unstable and emit thin jets when charged beyond certain limits. The instability of electrified drops in gases and liquids has been widely studied and used in applications including ink-jet printing, electrospinning nano-fibers, microfluidics and electrospray ionization. Here we report a different scenario: drops in solids become unstable and burst under sufficiently high electric fields. We find the instability of drops in solids morphologically resembles that in liquids, but the critical electric field for the instability follows a different scaling due to elasticity of solids. Our observations and theoretical models not only advance the fundamental understanding of electrified drops but also suggest a new failure mechanism of high-energy-density dielectric polymers, which have diverse applications ranging from capacitors for power grids and electric vehicles to muscle-like transducers for soft robots and energy harvesting.

  10. Smoothed particle hydrodynamics simulations of evaporation and explosive boiling of liquid drops in microgravity

    Science.gov (United States)

    Sigalotti, Leonardo Di G.; Troconis, Jorge; Sira, Eloy; Peña-Polo, Franklin; Klapp, Jaime

    2015-07-01

    The rapid evaporation and explosive boiling of a van der Waals (vdW) liquid drop in microgravity is simulated numerically in two-space dimensions using the method of smoothed particle hydrodynamics. The numerical approach is fully adaptive and incorporates the effects of surface tension, latent heat, mass transfer across the interface, and liquid-vapor interface dynamics. Thermocapillary forces are modeled by coupling the hydrodynamics to a diffuse-interface description of the liquid-vapor interface. The models start from a nonequilibrium square-shaped liquid of varying density and temperature. For a fixed density, the drop temperature is increased gradually to predict the point separating normal boiling at subcritical heating from explosive boiling at the superheat limit for this vdW fluid. At subcritical heating, spontaneous evaporation produces stable drops floating in a vapor atmosphere, while at near-critical heating, a bubble is nucleated inside the drop, which then collapses upon itself, leaving a smaller equilibrated drop embedded in its own vapor. At the superheat limit, unstable bubble growth leads to either fragmentation or violent disruption of the liquid layer into small secondary drops, depending on the liquid density. At higher superheats, explosive boiling occurs for all densities. The experimentally observed wrinkling of the bubble surface driven by rapid evaporation followed by a Rayleigh-Taylor instability of the thin liquid layer and the linear growth of the bubble radius with time are reproduced by the simulations. The predicted superheat limit (Ts≈0.96 ) is close to the theoretically derived value of Ts=1 at zero ambient pressure for this vdW fluid.

  11. Smoothed particle hydrodynamics simulations of evaporation and explosive boiling of liquid drops in microgravity.

    Science.gov (United States)

    Sigalotti, Leonardo Di G; Troconis, Jorge; Sira, Eloy; Peña-Polo, Franklin; Klapp, Jaime

    2015-07-01

    The rapid evaporation and explosive boiling of a van der Waals (vdW) liquid drop in microgravity is simulated numerically in two-space dimensions using the method of smoothed particle hydrodynamics. The numerical approach is fully adaptive and incorporates the effects of surface tension, latent heat, mass transfer across the interface, and liquid-vapor interface dynamics. Thermocapillary forces are modeled by coupling the hydrodynamics to a diffuse-interface description of the liquid-vapor interface. The models start from a nonequilibrium square-shaped liquid of varying density and temperature. For a fixed density, the drop temperature is increased gradually to predict the point separating normal boiling at subcritical heating from explosive boiling at the superheat limit for this vdW fluid. At subcritical heating, spontaneous evaporation produces stable drops floating in a vapor atmosphere, while at near-critical heating, a bubble is nucleated inside the drop, which then collapses upon itself, leaving a smaller equilibrated drop embedded in its own vapor. At the superheat limit, unstable bubble growth leads to either fragmentation or violent disruption of the liquid layer into small secondary drops, depending on the liquid density. At higher superheats, explosive boiling occurs for all densities. The experimentally observed wrinkling of the bubble surface driven by rapid evaporation followed by a Rayleigh-Taylor instability of the thin liquid layer and the linear growth of the bubble radius with time are reproduced by the simulations. The predicted superheat limit (T(s)≈0.96) is close to the theoretically derived value of T(s)=1 at zero ambient pressure for this vdW fluid.

  12. Clustering of floating particles in stratified turbulence

    Science.gov (United States)

    Boffetta, Guido; de Lillo, Filippo; Musacchio, Stefano; Sozza, Alessandro

    2016-11-01

    We study the dynamics of small floating particles transported by stratified turbulence in presence of a mean linear density profile as a simple model for the confinement and the accumulation of plankton in the ocean. By means of extensive direct numerical simulations we investigate the statistical distribution of floaters as a function of the two dimensionless parameters of the problem. We find that vertical confinement of particles is mainly ruled by the degree of stratification, with a weak dependency on the particle properties. Conversely, small scale fractal clustering, typical of non-neutral particles in turbulence, depends on the particle relaxation time and is only weakly dependent on the flow stratification. The implications of our findings for the formation of thin phytoplankton layers are discussed.

  13. Near shore floating oscillating wave column

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Three different types of floating buoys, using oscillating wave columns, have been considered for generating electric power in an Atlantic environment. The study considered the situation close to the shore, but in the ultimate it was hoped to deploy units offshore. Although other designs would have greater power capture efficiency, the Spar Buoy was studied in greatest depth as it was expected to have the edge in terms of building cost and operating economics. A risk assessment was carried out for both concrete and steel buoys. The report covers (1) history of the project development; (2) project definition; (3) power generation and sensitivities and (4) lessons learned. The study was sponsored by Great Britain's DTI.

  14. Nuclear Security for Floating Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Skiba, James M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scherer, Carolynn P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-13

    Recently there has been a lot of interest in small modular reactors. A specific type of these small modular reactors (SMR,) are marine based power plants called floating nuclear power plants (FNPP). These FNPPs are typically built by countries with extensive knowledge of nuclear energy, such as Russia, France, China and the US. These FNPPs are built in one country and then sent to countries in need of power and/or seawater desalination. Fifteen countries have expressed interest in acquiring such power stations. Some designs for such power stations are briefly summarized. Several different avenues for cooperation in FNPP technology are proposed, including IAEA nuclear security (i.e. safeguards), multilateral or bilateral agreements, and working with Russian design that incorporates nuclear safeguards for IAEA inspections in non-nuclear weapons states

  15. Analysis of Switched-Rigid Floating Oscillator

    Directory of Open Access Journals (Sweden)

    Prabhakar R. Marur

    2009-01-01

    Full Text Available In explicit finite element simulations, a technique called deformable-to-rigid (D2R switching is used routinely to reduce the computation time. Using the D2R option, the deformable parts in the model can be switched to rigid and reverted back to deformable when needed during the analysis. The time of activation of D2R however influences the overall dynamics of the system being analyzed. In this paper, a theoretical basis for the selection of time of rigid switching based on system energy is established. A floating oscillator problem is investigated for this purpose and closed-form analytical expressions are derived for different phases in rigid switching. The analytical expressions are validated by comparing the theoretical results with numerical computations.

  16. Capillary self-assembly of floating bodies

    Science.gov (United States)

    Jung, Sunghwan; Thompson, Paul; Bush, John

    2007-11-01

    We study the self-assembly of bodies supported on the water surface by surface tension. Attractive and repulsive capillary forces exist between menisci of, respectively, the same and opposite signs. In nature, floating objects (e.g. mosquito larvae) thus interact through capillary forces to form coherent packings on the water surface. We here present the results of an experimental investigation of such capillary pattern formation. Thin elliptical metal sheets were designed to have variable shape, flexibility and mass distribution. On the water surface, mono-, bi-, or tri-polar menisci could thus be achieved. The influence of the form of the menisci on the packings arising from the interaction of multiple floaters is explored. Biological applications are discussed.

  17. Potential of water surface-floating microalgae for biodiesel production: Floating-biomass and lipid productivities.

    Science.gov (United States)

    Muto, Masaki; Nojima, Daisuke; Yue, Liang; Kanehara, Hideyuki; Naruse, Hideaki; Ujiro, Asuka; Yoshino, Tomoko; Matsunaga, Tadashi; Tanaka, Tsuyoshi

    2017-03-01

    Microalgae have been accepted as a promising feedstock for biodiesel production owing to their capability of converting solar energy into lipids through photosynthesis. However, the high capital and operating costs, and high energy consumption, are hampering commercialization of microalgal biodiesel. In this study, the surface-floating microalga, strain AVFF007 (tentatively identified as Botryosphaerella sudetica), which naturally forms a biofilm on surfaces, was characterized for use in biodiesel production. The biofilm could be conveniently harvested from the surface of the water by adsorbing onto a polyethylene film. The lipid productivity of strain AVFF007 was 46.3 mg/L/day, allowing direct comparison to lipid productivities of other microalgal species. The moisture content of the surface-floating biomass was 86.0 ± 1.2%, which was much lower than that of the biomass harvested using centrifugation. These results reveal the potential of this surface-floating microalgal species as a biodiesel producer, employing a novel biomass harvesting and dewatering strategy.

  18. WindWaveFloat (WWF): Final Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    Weinstein, Alla; Roddier, Dominique; Banister, Kevin

    2012-03-30

    Principle Power Inc. and National Renewable Energy Lab (NREL) have completed a contract to assess the technical and economic feasibility of integrating wave energy converters into the WindFloat, resulting in a new concept called the WindWaveFloat (WWF). The concentration of several devices on one platform could offer a potential for both economic and operational advantages. Wind and wave energy converters can share the electrical cable and power transfer equipment to transport the electricity to shore. Access to multiple generation devices could be simplified, resulting in cost saving at the operational level. Overall capital costs may also be reduced, provided that the design of the foundation can be adapted to multiple devices with minimum modifications. Finally, the WindWaveFloat confers the ability to increase energy production from individual floating support structures, potentially leading to a reduction in levelized energy costs, an increase in the overall capacity factor, and greater stability of the electrical power delivered to the grid. The research conducted under this grant investigated the integration of several wave energy device types into the WindFloat platform. Several of the resulting system designs demonstrated technical feasibility, but the size and design constraints of the wave energy converters (technical and economic) make the WindWaveFloat concept economically unfeasible at this time. Not enough additional generation could be produced to make the additional expense associated with wave energy conversion integration into the WindFloat worthwhile.

  19. Mass Remaining During Evaporation of Sessile Drop

    Science.gov (United States)

    2008-09-01

    to> \\fyj Greek Symbols P Contact angle of sessile drop . n Droplet shape factor = h/d 6 Non-dimensional time = t/i V Air kinematic viscosity...factor n, = h / d (where h = maximum height of the drop ), which can also be directly related to the contact angle (P) of the drop , that is r| = (l-cos(P...three drop size (initial mass or volume) conditions with all other conditions the same. These runs have a constant contact angle , (3 = 16.5° ± 1.5

  20. Rapid Drop Dynamics During Superhydrophobic Condensation

    Science.gov (United States)

    Zhang, Xiaodong; Boreyko, Jonathan; Chen, Chuan-Hua

    2008-11-01

    Rapid drop motion is observed on superhydrophobic surfaces during condensation; condensate drops with diameter of order 10 μm can move at above 100G and 0.1 m/s. When water vapor condenses on a horizontal superhydrophobic surface, condensate drops move in a seemingly random direction. The observed motion is attributed to the energy released through coalescence of neighboring condensate drops. A scaling analysis captured the initial acceleration and terminal velocity. Our work is a step forward in understanding the dynamics of superhydrophobic condensation occurring in both natural water-repellant plants and engineered dropwise condensers.

  1. Numerical simulations of vibrating sessile drop

    Science.gov (United States)

    Kahouadji, Lyes; Chergui, Jalel; Juric, Damir; Shin, Seungwon; Craster, Richard; Matar, Omar

    2016-11-01

    A vibrated drop constitutes a very rich physical system, blending both interfacial and volume phenomena. A remarkable experimental study was performed by M. Costalonga highlighting sessile drop motion subject to horizontal, vertical and oblique vibration. Several intriguing phenomena are observed such as drop walking and rapid droplet ejection. We perform three-dimensional direct numerical simulations of vibrating sessile drops where the phenomena described above are computed using the massively parallel multiphase code BLUE. EPSRC UK Programme Grant MEMPHIS (EP/K003976/1).

  2. Impact force of a falling drop

    Science.gov (United States)

    Soto, Dan; Clanet, Cristophe; Quere, David; Xavier Boutillon Collaboration

    2012-11-01

    Controlling droplet deposition is crucial in many industrial processes such as spraying pesticides on crops, inkjet printing or spray coating. Therefore, the dynamics of drop impacts have been extensively studied for more than one century. However, few literature describe the impacting force of a drop on a solid flat surface, although it might be a way to measure the size distribution of a collection of falling drops. We investigated experimentally how the instantaneous force at impact depends on impact velocity and drop radius. We also propose a new model to understand our observations. Physique et Mecanique des Milieux Heterogenes, CNRS, ESPCI, Paris France & Ladhyx, CNRS, Ecole Polytechnique, Palaiseau, France.

  3. Drops moving along and across a filament

    Science.gov (United States)

    Sahu, Rakesh P.; Sinha-Ray, Suman; Yarin, Alexander; Pourdeyhimi, Behnam

    2013-11-01

    The present work is devoted to the experimental study of oil drop motion both along and across a filament due to the air jet blowing. In case of drop moving along the filament, phenomena such as drop stick-slip motion, shape oscillations, shedding of a tail along the filament, the tail capillary instability and drop recoil motion were observed which were rationalized in the framework of simplified models. Experiments with cross-flow of the surrounding gas relative to the filament with an oil drop on it were conducted, with air velocity in the range of 7.23 to 22.7 m s-1. The Weber number varied from 2 to 40 and the Ohnesorge number varied from 0.07 to 0.8. The lower and upper critical Weber numbers were introduced to distinguish between the beginning of the drop blowing off the filament and the onset of the bag-stamen breakup. The range of the Weber number between these two critical values is filled with three types of vibrational breakup: V1 (a balloon-like drop being blown off), V2 (a drop on a single stamen being blown off), and V3 (a drop on a double stamen being blown off). The Weber number/Ohnesorge number plane was delineated into domains of different breakup regimes. The work is supported by the Nonwovens Cooperative Research Center (NCRC).

  4. Drop deformation by laser-pulse impact

    CERN Document Server

    Gelderblom, Hanneke; Klein, Alexander L; Bouwhuis, Wilco; Lohse, Detlef; Villermaux, Emmanuel; Snoeijer, Jacco H

    2015-01-01

    A free-falling absorbing liquid drop hit by a nanosecond laser-pulse experiences a strong recoil-pressure kick. As a consequence, the drop propels forward and deforms into a thin sheet which eventually fragments. We study how the drop deformation depends on the pulse shape and drop properties. We first derive the velocity field inside the drop on the timescale of the pressure pulse, when the drop is still spherical. This yields the kinetic-energy partition inside the drop, which precisely measures the deformation rate with respect to the propulsion rate, before surface tension comes into play. On the timescale where surface tension is important the drop has evolved into a thin sheet. Its expansion dynamics is described with a slender-slope model, which uses the impulsive energy-partition as an initial condition. Completed with boundary integral simulations, this two-stage model explains the entire drop dynamics and its dependance on the pulse shape: for a given propulsion, a tightly focused pulse results in a...

  5. PERANCANGAN FLOATING DOCK UNTUK DAERAH PERAIRAN PELABUHAN KOTA TEGAL

    Directory of Open Access Journals (Sweden)

    Kiryanto Kiryanto

    2013-06-01

    Full Text Available Floating dock merupakan bangunan air sebagai tempat reparasi kapal yang dinilai cukup efisien dalam pembangunannya karena tidak membutuhkan dana yang terlalu mahal. Di sektor indusrti perkapalan kota tegal sudah memiliki galangan dan dock reparasi kapal yang cukup berkembang.  Ide perancangan floating dock ini dirancang sebagai alternatif baru pelayanan reparasi kapal. Perancangan floating dock ini juga memperhatikan dengan detail kapasitas kapal – kapal yang pernah melakukan repararasi di sekitar galangan di Kota Tegal agar ditemukan ukuran utama floating dock yang tepat. Dari Kapasitas kapal yang ada dan berdasarkan metode perbandingan ukuran beberapa floating dock, maka ditemukan ukuran utama yang tepat untuk menampung kebutuhan pelayanan reparasi kapal yaitu LOA = 136,37 m, Lpt = 114.80 m, Bmax = 36,40 m, Bmd: 30,80 m, Tmin = 0,86 m, Tmax = 1,58 m, Hpt = 2,10 m, HOA = 9,60 m. Berdasarkan perhitungan ditemukan juga Ton Lifting Capacity (TLC sebesar 3000 ton. Perancangan menggunakan software perkapalan yaitu dengan menggunakan AutoCad, Delftship, Maxsurf dan Hidromax. Dengan analisa stabilitas menggunakan software Hidromax diketahui bahwa floating dock ini mampu memiliki stabilitas yang baik dengan 4 kondisi yang semua memenuhi criteria  International Maritime Organisation (IMO. Perancangan floating dock ini juga menghitung analisa ekonomis dan investasi. Dari rekapitulasi dana investasi pembangunan floating dock yaitu sebesar Rp.136.622.888.000,00 dengan nilai kembali atau break even point selama 10 tahun dengan modal sendiri, 14 tahun dengan 50% modal sendiri dan 50 % pinjaman bank, dan break event point 18 tahun untuk dana pembangunan floating dock yang berasal dari 100 % pinjaman bank

  6. Highly anomalous accumulation rates of C and N recorded by a relic, free-floating peatland in Central Italy.

    Science.gov (United States)

    Zaccone, Claudio; Lobianco, Daniela; Shotyk, William; Ciavatta, Claudio; Appleby, Peter G; Brugiapaglia, Elisabetta; Casella, Laura; Miano, Teodoro M; D'Orazio, Valeria

    2017-02-23

    Floating islands mysteriously moving around on lakes were described by several Latin authors almost two millennia ago. These fascinating ecosystems, known as free-floating mires, have been extensively investigated from ecological, hydrological and management points of view, but there have been no detailed studies of their rates of accumulation of organic matter (OM), organic carbon (OC) and total nitrogen (TN). We have collected a peat core 4 m long from the free-floating island of Posta Fibreno, a relic mire in Central Italy. This is the thickest accumulation of peat ever found in a free-floating mire, yet it has formed during the past seven centuries and represents the greatest accumulation rates, at both decadal and centennial timescale, of OM (0.63 vs. 0.37 kg/m(2)/yr), OC (0.28 vs. 0.18 kg/m(2)/yr) and TN (3.7 vs. 6.1 g/m(2)/yr) ever reported for coeval peatlands. The anomalously high accretion rates, obtained using (14)C age dating, were confirmed using (210)Pb and (137)Cs: these show that the top 2 m of Sphagnum-peat has accumulated in only ~100 years. As an environmental archive, Posta Fibreno offers a temporal resolution which is 10x greater than any terrestrial peat bog, and promises to provide new insight into environmental changes occurring during the Anthropocene.

  7. Correlation for Sessile Drop Evaporation

    Science.gov (United States)

    Kelly-Zion, Peter; Pursell, Christopher; Wassom, Gregory; Mandelkorn, Brenton; Nkinthorn, Chris

    2016-11-01

    To better understand how the evaporation of sessile drops and small puddles is controlled by the vapor phase transport mechanisms of mass diffusion and buoyancy-induced convection, the evaporation rates of eight liquids evaporating under a broad range of ambient conditions were correlated with physical and geometrical properties. Examination of the correlation provides valuable insight into how the roles of diffusive and convective transport change with physical and geometrical parameters. The correlation predicts measured evaporation rates to within a root-mean-square error of 7.3%. The correlation is composed of two terms, a term which provides the rate of evaporation under diffusion-only conditions, and a term which provides the influence of convection. This second term suggests the manner in which the processes of diffusion and convection are coupled. Both processes are dependent on the distribution of the vapor, through the molar concentration gradient for diffusion and through the mass density gradient for convection. The term representing the influence of convection is approximately inversely proportional to the square root of diffusivity, indicating the tendency of diffusive transport to reduce convection by making the vapor distribution more uniform. Financial support was provided by the ACS Petroleum Research Fund.

  8. Open source high performance floating-point modules.

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, Keith Douglas

    2006-02-01

    Given the logic density of modern FPGAs, it is feasible to use FPGAs for floating-point applications. However, it is important that any floating-point units that are used be highly optimized. This paper introduces an open source library of highly optimized floating-point units for Xilinx FPGAs. The units are fully IEEE compliant and achieve approximately 230 MHz operation frequency for double-precision add and multiply in a Xilinx Virtex-2-Pro FPGA (-7 speed grade). This speed is achieved with a 10 stage adder pipeline and a 12 stage multiplier pipeline. The area requirement is 571 slices for the adder and 905 slices for the multiplier.

  9. Optimal Control of a Ballast-Stabilized Floating Wind Turbine

    DEFF Research Database (Denmark)

    Christiansen, Søren; Knudsen, Torben; Bak, Thomas

    2011-01-01

    Offshore wind energy capitalizes on the higher and less turbulent wind speeds at sea. The use of floating structures for deeper waters is being explored. The control objective is a tradeoff between power capture and fatigue, especially that produced by the oscillations caused by the reduced...... structural stiffness of a floating installation in combination with a coupling between the fore–aft motion of the tower and the blade pitch. To address this problem, the present paper models a ballast-stabilized floating wind turbine, and suggests a linear quadratic regulator (LQR) in combination with a wind...

  10. Profiling float-based observations of net respiration beneath the mixed layer

    Science.gov (United States)

    Hennon, Tyler D.; Riser, Stephen C.; Mecking, Sabine

    2016-06-01

    We employ profiling floats with dissolved oxygen sensors to observe in situ temporal oxygen evolution below the mixed layer, allowing us to characterize net respiration of organic carbon in eight distinct regions over the globe. Export and export efficiency are generally high in locations with strong seasonal variability and low in locations of weak seasonality. Vertically integrated respiration is weakly, yet significantly, correlated with remote observations of chlorophyll, net primary production, and planktonic community size structure. These correlations suggest that regimes of high net primary production and large phytoplankton fuel elevated respiration at depth. Several regions of float-based observations intersect with sites of other detailed observations (e.g., Hawaii and Sargasso Sea), which allows us to compare our results to independent studies. We find that there is good agreement among export production estimates at highly seasonal locations, and that float-based observations may be biased low at weakly seasonal locations. We posit that the reason for the low-latitude discrepancy is the relative steady state of oxygen concentration caused by weak seasonality and shallow wintertime mixed layer depths.

  11. Total Site Heat Integration Considering Pressure Drops

    Directory of Open Access Journals (Sweden)

    Kew Hong Chew

    2015-02-01

    Full Text Available Pressure drop is an important consideration in Total Site Heat Integration (TSHI. This is due to the typically large distances between the different plants and the flow across plant elevations and equipment, including heat exchangers. Failure to consider pressure drop during utility targeting and heat exchanger network (HEN synthesis may, at best, lead to optimistic energy targets, and at worst, an inoperable system if the pumps or compressors cannot overcome the actual pressure drop. Most studies have addressed the pressure drop factor in terms of pumping cost, forbidden matches or allowable pressure drop constraints in the optimisation of HEN. This study looks at the implication of pressure drop in the context of a Total Site. The graphical Pinch-based TSHI methodology is extended to consider the pressure drop factor during the minimum energy requirement (MER targeting stage. The improved methodology provides a more realistic estimation of the MER targets and valuable insights for the implementation of the TSHI design. In the case study, when pressure drop in the steam distribution networks is considered, the heating and cooling duties increase by 14.5% and 4.5%.

  12. Aging, Terminal Decline, and Terminal Drop

    Science.gov (United States)

    Palmore, Erdman; Cleveland, William

    1976-01-01

    Data from a 20-year longitudinal study of persons over 60 were analyzed by step-wise multiple regression to test for declines in function with age, for terminal decline (linear relationship to time before death), and for terminal drop (curvilinear relationship to time before death). There were no substantial terminal drop effects. (Author)

  13. Self-Excited Drop Oscillations in Electrowetting

    NARCIS (Netherlands)

    Baret, Jean-Christophe; Decre, Michel M.J.; Mugele, Frieder

    2007-01-01

    We studied millimeter-sized aqueous sessile drops in an ambient oil environment in a classical electrowetting configuration with a wire-shaped electrode placed at a variable height above the substrate. Within a certain range of height and above a certain threshold voltage, the drop oscillates period

  14. Static shapes of levitated viscous drops

    Science.gov (United States)

    Duchemin, L.; Lister, J. R.; Lange, U.

    2005-06-01

    We consider the levitation of a drop of molten glass above a spherical porous mould, through which air is injected with constant velocity. The glass is assumed to be sufficiently viscous compared to air that motion in the drop is negligible. Thus static equilibrium shapes are determined by the coupling between the lubricating pressure in the supporting air cushion and the Young-Laplace equation. The upper surface of the drop is under constant atmospheric pressure; the static shape of the lower surface of the drop is computed using lubrication theory for the thin air film. Matching of the sessile curvature of the upper surface to the curvature of the mould gives rise to a series of capillary "brim" waves near the edge of the drop which scale with powers of a modified capillary number. Several branches of static solutions are found, such that there are multiple solutions for some drop volumes, but no physically reasonable solutions for other drop volumes. Comparison with experiments and full Navier-Stokes calculations suggests that the stability of the process can be predicted from the solution branches for the static shapes, and related to the persistence of brim waves to the centre of the drop. This suggestion remains to be confirmed by a formal stability analysis.

  15. University Drop-Out: An Italian Experience

    Science.gov (United States)

    Belloc, Filippo; Maruotti, Antonello; Petrella, Lea

    2010-01-01

    University students' drop-out is a crucial issue for the universities' efficiency evaluation and funding. In this paper, we analyze the drop-out rate of the Economics and Business faculty of Sapienza University of Rome. We use administrative data on 9,725 undergraduates students enrolled in three-years bachelor programs from 2001 to 2007 and…

  16. Floating Classroom Outreach as an Introduction to Ocean Studies

    Science.gov (United States)

    McFadden, M.

    2016-02-01

    Many children and young adults living within only one hour of the coast never have the opportunity to explore a beach or go out on a boat because of financial challenges or lack of transportation.These types of experiences are the spark that helped many ocean scientists become fascinated with the ocean and later pursue a career related to the ocean. This presentation will discuss a variety of outreach projects and the efficacy of each. Projects vary in age, complexity and cost. These projects include a Beach Clean-Up open to students and their families at a community college organized by a campus volunteer group with a focus on social issues, a Marine Biology and Physical Oceanography class joint floating classroom trip open to college students to introduce non-STEM students to marine science in an exciting setting, and an education outreach trip for 8-12 years old children from the Boys and Girls Club in Newport, RI in collaboration with The International SeaKeepers Society, a non-profit that facilitates ocean research and education by working closely with the yachting community. Emphasis on environmental education in the U.S. has grown considerably over recent years, and the development of unique and innovative approaches to hands-on marine science education are needed to excite students to explore the marine environment and care about environmental stewardship.

  17. Debate - Trafficking as a Floating Signifier: The view from Brazil

    Directory of Open Access Journals (Sweden)

    Grupo Davida

    2015-04-01

    Full Text Available The fact that the United Nations (UN Trafficking Protocol is not an autochthonous product of the Brazilian political system has resulted in its being brought into that system as a ‘floating signifier’: something that does not point to any actual object or agreed upon meaning.[1] People who wish to criminalise prostitution have attempted to bend the Protocol in that direction while prostitutes’ rights groups have used it to critique current Brazilian laws, emphasising the need to distinguish migration for voluntary, consensual sex work from trafficking. Groups concerned with organ trafficking (a crime for which there are practically no proven cases in Brazil have managed to push their banner to the fore in the trafficking debate. Meanwhile, Brazil’s long-established and relatively successful anti-slave labour movement has been loath to ‘change their brand’, having already gained a considerable degree of institutionalisation prior to Brazil’s ratification of the Protocol in 2004. [1] C Lévi-Strauss, ‘Introduction à l'oeuvre de Marcel Mauss’ in Mauss, Sociologie et Anthropologie, Paris, 1950.

  18. Dynamic Stability of Equilibrium Capillary Drops

    Science.gov (United States)

    Feldman, William M.; Kim, Inwon C.

    2014-03-01

    We investigate a model for contact angle motion of quasi-static capillary drops resting on a horizontal plane. We prove global in time existence and long time behavior (convergence to equilibrium) in a class of star-shaped initial data for which we show that topological changes of drops can be ruled out for all times. Our result applies to any drop which is initially star-shaped with respect to a small ball inside the drop, given that the volume of the drop is sufficiently large. For the analysis, we combine geometric arguments based on the moving-plane type method with energy dissipation methods based on the formal gradient flow structure of the problem.

  19. CPAS Preflight Drop Test Analysis Process

    Science.gov (United States)

    Englert, Megan E.; Bledsoe, Kristin J.; Romero, Leah M.

    2015-01-01

    Throughout the Capsule Parachute Assembly System (CPAS) drop test program, the CPAS Analysis Team has developed a simulation and analysis process to support drop test planning and execution. This process includes multiple phases focused on developing test simulations and communicating results to all groups involved in the drop test. CPAS Engineering Development Unit (EDU) series drop test planning begins with the development of a basic operational concept for each test. Trajectory simulation tools include the Flight Analysis and Simulation Tool (FAST) for single bodies, and the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) simulation for the mated vehicle. Results are communicated to the team at the Test Configuration Review (TCR) and Test Readiness Review (TRR), as well as at Analysis Integrated Product Team (IPT) meetings in earlier and intermediate phases of the pre-test planning. The ability to plan and communicate efficiently with rapidly changing objectives and tight schedule constraints is a necessity for safe and successful drop tests.

  20. Temperature Effect on Photovoltaic Modules Power Drop

    Directory of Open Access Journals (Sweden)

    Qais Mohammed Aish

    2015-06-01

    Full Text Available In order to determine what type of photovoltaic solar module could best be used in a thermoelectric photovoltaic power generation. Changing in powers due to higher temperatures (25oC, 35oC, and 45oC have been done for three types of solar modules: monocrystalline , polycrystalline, and copper indium gallium (di selenide (CIGS. The Prova 200 solar panel analyzer is used for the professional testing of three solar modules at different ambient temperatures; 25oC, 35oC, and 45oC and solar radiation range 100-1000 W/m2. Copper indium gallium (di selenide module has the lowest power drop (with the average percentage power drop 0.38%/oC while monocrystalline module has the highest power drop (with the average percentage power drop 0.54%/oC, while polycrystalline module has a percentage power drop of 0.49%/oC.

  1. Pressure drop in CIM disk monolithic columns.

    Science.gov (United States)

    Mihelic, Igor; Nemec, Damjan; Podgornik, Ales; Koloini, Tine

    2005-02-11

    Pressure drop analysis in commercial CIM disk monolithic columns is presented. Experimental measurements of pressure drop are compared to hydrodynamic models usually employed for prediction of pressure drop in packed beds, e.g. free surface model and capillary model applying hydraulic radius concept. However, the comparison between pressure drop in monolith and adequate packed bed give unexpected results. Pressure drop in a CIM disk monolithic column is approximately 50% lower than in an adequate packed bed of spheres having the same hydraulic radius as CIM disk monolith; meaning they both have the same porosity and the same specific surface area. This phenomenon seems to be a consequence of the monolithic porous structure which is quite different in terms of the pore size distribution and parallel pore nonuniformity compared to the one in conventional packed beds. The number of self-similar levels for the CIM monoliths was estimated to be between 1.03 and 2.75.

  2. Universality in freezing of an asymmetric drop

    Science.gov (United States)

    Ismail, Md Farhad; Waghmare, Prashant R.

    2016-12-01

    We present the evidence of universality in conical tip formation during the freezing of arbitrary-shaped sessile droplets. The focus is to demonstrate the relationship between this universality and the liquid drop shape. We observe that, in the case of asymmetric drops, this universal shape is achieved when the tip reconfigures by changing its location, which subsequently alters the frozen drop shape. The proposed "two-triangle" model quantifies the change in the tip configuration as a function of the asymmetry of the drop that shows a good agreement with the experimental evidence. Finally, based on the experimental and theoretical exercise, we propose the scaling dependence between the variations in the tip configuration and the asymmetry of the drop.

  3. Patients dropping out of treatment in Italy.

    Science.gov (United States)

    Morlino, M; Martucci, G; Musella, V; Bolzan, M; de Girolamo, G

    1995-07-01

    The aim of this study was to explore the extent and the specific features of drop-out for patients having a first contact with an university psychiatric outpatient clinic in Italy over the course of 1 year and to determine which variables were associated with early termination of treatment. Of the 158 patients selected for this study, there was an overall 3-month drop-out rate following the first visit of 63%. Of the 59 patients who had returned once after the initial contact, 28 interrupted subsequently the treatment, although the therapist's plan included further visits. The overall drop-out rate at 3 months was thus 82%. The only 2 variables associated with drop-out rates were the patients' perception of the severity of their disorder and the psychiatric history: continuing patients were more frequently in agreement with the clinician's judgment as compared with those who dropped out and were more likely to have already been in psychiatric treatment.

  4. Floating Cities: ‘we have a dream to realize’

    OpenAIRE

    Boogaard, Floris; Graaf, R.E. de

    2013-01-01

    A fundamental new approach to urban development is needed for the challenges of the 21st century. Floating houses and cities can accommodate future urbanization without sacrificing land and provide a sustainable living.

  5. Efficient Implementation of Decimal Floating Point Adder in FPGA

    Directory of Open Access Journals (Sweden)

    Yang Huijing

    2013-10-01

    Full Text Available Decimal floating Point adder is one of the most frequent operations used by many financial, business and user-oriented applications but current implementations in FPGAs are very inefficient in terms of both area and latency when compared to binary floating point adder. This paper has shown an efficient implementation of a new parallel decimal floating point module on a reconfigurable platform, which is both area as well as performance optimal. The decimal floating-point Adder was further pipelined into five stages to increase the maximum frequency of operation. The synthesis results for a Stratix IV device indicate that our implementations have 25.1% reduction of the latency and 1.1% reduction of area compared to an existing alter-core adder design, presenting area and delay figures close to those of optimal binary adder trees.  

  6. Motion Characteristics of Novel Floating Foundation for Offshore Wind Turbine

    Institute of Scientific and Technical Information of China (English)

    李嘉文; 唐友刚; 王宾

    2016-01-01

    A novel floating foundation to support the NREL offshore 5 MW wind turbine was designed conceptu-ally by combining the characteristics of barge and Spar. The main focus was structural design and hydrodynamic modelling. Based on this novel floating foundation, the hydrodynamic performance was investigated in the fre-quency domain and time domain by using the wave analysis software HydroD and DeepC from Det Norske Veritas. The frequency domain analysis was conducted to investigate the effects of the incident wave angle and water depth. The time-domain analysis was carried out to evaluate the response of the floating foundation under a selected op-erational condition. The hydrodynamic performances of this floating foundation with respect to time series and re-sponse spectra were also investigated in this study.

  7. Backscatter-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer Continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  8. Bathymetry Hillshade-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014. The shaded-relief raster was generated from bathymetry data...

  9. Wave transmission prediction of multilayer floating breakwater using neural network

    Digital Repository Service at National Institute of Oceanography (India)

    Mandal, S.; Patil, S.G.; Hegde, A.V.

    of floating breakwater. Training and testing of the network models are carried out for different hidden nodes and epochs. The results of network models are compared with the measured values. It is observed that the correlation (above 90%) between predicted...

  10. WindFloat Pacific Project, Final Scientific and Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Banister, Kevin [Principle Power, Inc., Emeryville, CA (United States)

    2017-01-17

    PPI’s WindFloat Pacific project (WFP) was an up to 30 MW floating offshore wind demonstration project proposed off the Coast of Oregon. The project was to be sited approximately 18 miles due west of Coos Bay, in over 1000 ft. of water, and is the first floating offshore wind array proposed in the United States, and the first offshore wind project of any kind proposed off the West Coast. PPI’s WindFloat, a semi-submersible foundation designed for high-capacity (6MW+) offshore wind turbines, is at the heart of the proposed project, and enables access to the world class wind resource at the project site and, equally, to other deep water, high wind resource areas around the country.

  11. High voltage switches having one or more floating conductor layers

    Energy Technology Data Exchange (ETDEWEB)

    Werne, Roger W.; Sampayan, Stephen; Harris, John Richardson

    2015-11-24

    This patent document discloses high voltage switches that include one or more electrically floating conductor layers that are isolated from one another in the dielectric medium between the top and bottom switch electrodes. The presence of the one or more electrically floating conductor layers between the top and bottom switch electrodes allow the dielectric medium between the top and bottom switch electrodes to exhibit a higher breakdown voltage than the breakdown voltage when the one or more electrically floating conductor layers are not present between the top and bottom switch electrodes. This increased breakdown voltage in the presence of one or more electrically floating conductor layers in a dielectric medium enables the switch to supply a higher voltage for various high voltage circuits and electric systems.

  12. Page | 155 FLOATING CHARGE: A CHILD OF EQUITABLE ...

    African Journals Online (AJOL)

    Fr. Ikenga

    financial institutions dealing on credit became more conscious in their credit ... to any risk especially as it relates to non-repayment of loans advanced to the ..... significant feature of floating charge is that the company retains management ...

  13. Geologic Observations-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This part of the Oregon Outer Continental Shelf (OCS) Floating Windfarm Suite Data Release presents geological observations from video collected on U.S. Geological...

  14. Geologic Observations-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This part of the Oregon Outer Continental Shelf (OCS) Floating Windfarm Suite Data Release presents geological observations from video collected on U.S. Geological...

  15. Formulation Optimization and In-vitro Evaluation of Oral Floating ...

    African Journals Online (AJOL)

    forming agents for formulating controlled release floating tablets of captopril. FTIR and DSC spectra showed ..... correspond to the stretching vibrations of C–H bond and carboxyl .... barrier which produces upward motion and as a result tablets ...

  16. Bathymetry Hillshade-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014. The shaded-relief raster was generated from bathymetry data...

  17. A Method for Modeling of Floating Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Wang, Kai; Hansen, Martin Otto Laver; Moan, Torgeir

    2013-01-01

    . In order to assess the technical and economic feasibility of this novel concept, a comprehensive simulation tool for modeling of the floating vertical axis wind turbine is needed. This work presents the development of a coupled method for modeling of the dynamics of a floating vertical axis wind turbine......It is of interest to investigate the potential advantages of floating vertical axis wind turbine (FVAWT) due to its economical installation and maintenance. A novel 5MW vertical axis wind turbine concept with a Darrieus rotor mounted on a semi-submersible support structure is proposed in this paper....... This integrated dynamic model takes into account the wind inflow, aerodynamics, hydrodynamics, structural dynamics (wind turbine, floating platform and the mooring lines) and a generator control. This approach calculates dynamic equilibrium at each time step and takes account of the interaction between the rotor...

  18. Multifractal analysis of managed and independent float exchange rates

    Science.gov (United States)

    Stošić, Darko; Stošić, Dusan; Stošić, Tatijana; Stanley, H. Eugene

    2015-06-01

    We investigate multifractal properties of daily price changes in currency rates using the multifractal detrended fluctuation analysis (MF-DFA). We analyze managed and independent floating currency rates in eight countries, and determine the changes in multifractal spectrum when transitioning between the two regimes. We find that after the transition from managed to independent float regime the changes in multifractal spectrum (position of maximum and width) indicate an increase in market efficiency. The observed changes are more pronounced for developed countries that have a well established trading market. After shuffling the series, we find that the multifractality is due to both probability density function and long term correlations for managed float regime, while for independent float regime multifractality is in most cases caused by broad probability density function.

  19. Backscatter-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer Continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  20. Preparation and evaluation of gastroretentive floating tablets of acyclovir.

    Science.gov (United States)

    Garg, Rajeev; Gupta, G D

    2009-10-01

    The present study performed by preparation and evaluation of floating tablets of Acyclovir as model drug for prolongation of gastric residence time. Floating effervescent tablets were formulated by various materials like hydroxypropyl methylcellulose K 4M, K 15M, psyllium husk, swelling agent as crospovidone and microcrystalline cellulose and gas generating agent like sodium bicarbonate and citric acid and evaluated for floating properties, swelling characteristics and in vitro drug release studies. Floating noneffervescent tablets were prepared by polypropylene foam powder and different matrix forming polymers like HPMC K 4M, Carbopol 934P, xanthan gum and sodium alginate. In vitro drug release studies were performed and drug release kinetics evaluated using the linear regression method was found to follow both the Higuchi and the Korsmeyer and Peppas equation. The drug release mechanism was found fickian type in most of the formulations.

  1. Dynamic Response Analysis of a Floating Mooring System

    Institute of Scientific and Technical Information of China (English)

    LE Conghuan; DING Hongyan; ZHANG Puyang

    2014-01-01

    An innovative floating mooring system with two or more independent floating mooring platforms in the middle and one rigid platform on each side is proposed for improving efficiency and safety in shallow water. For this new system, most of collision energy is absorbed through the displacement of floating platforms. In order to illustrate the validity of the system, a series of model tests were conducted at a scale of 1:40. The coupled motion characteristics of the floating mooring platforms were discussed under regular and irregular waves, and the influences of wave direction and other characteristics on dynamic response of the system were analyzed. The results show that the mooring system is safest at 0˚of wave incident angle, whereas the most dangerous mooring state occurs at 90˚ of wave incident angle. Motion responses increase with the increase of wave height, but are not linearly related to changes in wave height.

  2. Floating tidal power station. Schwimmkoerper-Gezeiten-Kraftwerk

    Energy Technology Data Exchange (ETDEWEB)

    Muenzner, H.J.

    1987-03-19

    This is a floating tidal power station, characterized by the fact that water stores are lifted by the tide by float lifts in the form of docks; on the flood tide they are supported mechanically at the height reached by support members or hydraulically, until after several tides a favourable and economically justifiable height for the technical efficiency of water turbines is reached by the first water store. The stored water is then released through water turbines to obtain energy. This emptied water store is then lowered to the initial position with the support members with the aid of emptied float lifts built like ship's lifting equipment (which only require a slight movement of a weight for lifting and lowering). The filling and lifting is then repeated. During this regeneration, the energy is obtained from the next water store. A whole floating tidal power station consists of as many water stores as are required for uninterrupted continuous operation.

  3. Bathymetry-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer continental shelf (OCS) Floating Wind Farm Site in 2014. The...

  4. Contours-Oregon OCS Floating Wind Farm Site

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This Data Release contains data from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site in 2014. The...

  5. Seven hundred years of peat formation recorded throughout a deep floating mire profile from Central Italy

    Science.gov (United States)

    Lobianco, Daniela; D'Orazio, Valeria; Miano, Teodoro; Zaccone, Claudio

    2016-04-01

    Floating mires are defined by the occurrence of emergent vegetation rooted in highly organic buoyant mats that rise and fall with changes in water level. Islands floating and moving on a lake naturally were already described by Pliny the Elder in his Naturalis historia almost two millennia ago. Actually, he devoted a whole chapter of Naturalis historia to "Of Islands Ever Floating and Swimming", reporting how certain isles were always waving and never stood still. The status of "flotant" has been defined transitory; in fact, these small isles often disappear, in most of the cases because of a transition from floating island to firm land during decades is likely to happen. That is why most of the floating islands described by Pliny the Elder (e.g., Lacus Fundanus, Lacus Cutiliensis, Lacus Mutinensis, Lacus Statoniensis, Lacus Tarquiniensis, Lydia Calaminae, Lacus Vadimonis) do not exist anymore. In the present study, peat formation and organic matter evolution were investigated in order to understand how these peculiar environments form, and how stable actually they are. In fact, it is hoped that peat-forming floating mires could provide an exceptional tool for environmental studies, since much of their evolution, as well as the changes of the surrounding areas, is recorded in their peat deposits. A complete, 4-m deep peat core was collected in July 2012 from the floating island of Posta Fibreno, a relic mire in the Central Italy. This floating island has a diameter of ca. 30 m, a submerged thickness of about 3 m, and the vegetation is organized in concentric belts, from the Carex paniculata palisade to the Sphagnum centre. Here, some of the southernmost Italian populations of Sphagnum palustre occur. The 14C age dating of organic sediments isolated from the sample at 385 cm of depth revealed that the island formed ca. 700 yrs ago (620±30 yr BP). The top 100 cm, consisting almost exclusively of Sphagnum mosses, show a very low bulk density (avg., 0.03±0.01 g cm-3

  6. Breakwater Design for protection of floating houses in Haringvliet Region

    OpenAIRE

    Aggarwal, a; Vargas Solis, A.; Pasaoglu, M.; Harihar, S.; Wahida, S.; Wang, Q.

    2014-01-01

    A floating house development project to be constructed in the coast of Hellevoetsluis, in the municipality of Voorne-Putten, is under consideration. Within a project of this nature, several aspects need to be taken into account in order to safeguard the infrastructure against additional loadings to which regular houses are not exposed to. Hydrodynamic forcing could directly or indirectly cause damage and unpleasant displacements on the houses, as they float on the waters of the Harringvliet e...

  7. The effect of floating houses on water quality

    OpenAIRE

    Foka, E.; Rutten, M.; Boogaard, F. van de; de Graaf, R; Lima, R.; N. van de Giesen

    2015-01-01

    The need of an adaptive sustainable solution for the increased land scarcity, growing urbanization, climate change and flood risks resulted in the concept of the floating urbanization. In The Netherlands this new type of housing attracted the interest of local authorities, municipalities and water boards. Moreover, plans to incorporate floating houses in the urban planning have already been developed. However, the knowledge gap regarding the potential effect on the water quality halts the fur...

  8. Study on new float polishing with the MCF

    OpenAIRE

    Shimada, K.; Matsuo, Y.; Yamamoto, K; Zheng, Y.

    2007-01-01

    Purpose: As a continuation of a previous paper [1], the report demonstrates the various possibilities of float polishing utilizing the present improved magnetic compound fluid (MCF). The MCF developed by one of authors, Shimada, in 2001, was improved by the addition of α-cellulose, thereby achieving a clearance as great as 8mm as shown in another paper [1]. The present paper describes the possibility of the application of the MCF float polishing technique with α-cellulose.Design/methodology/a...

  9. Parametric time delay modeling for floating point units

    Science.gov (United States)

    Fahmy, Hossam A. H.; Liddicoat, Albert A.; Flynn, Michael J.

    2002-12-01

    A parametric time delay model to compare floating point unit implementations is proposed. This model is used to compare a previously proposed floating point adder using a redundant number representation with other high-performance implementations. The operand width, the fan-in of the logic gates and the radix of the redundant format are used as parameters to the model. The comparison is done over a range of operand widths, fan-in and radices to show the merits of each implementation.

  10. Floating-point multiple data stream digital signal processor

    Energy Technology Data Exchange (ETDEWEB)

    Fortier, M.; Corinthios, M.J.

    1982-01-01

    A microprogrammed multiple data stream digital signal processor is introduced. This floating-point processor is capable of implementing optimum Wiener filtering of signals, in general, and images in particular. Generalised spectral analysis transforms such as Fourier, Walsh, Hadamard, and generalised Walsh are efficiently implemented in a bit-slice microprocessor-based architecture. In this architecture, a microprogrammed sequencing section directly controls a central floating-point signal processing unit. Throughout, computations are performed on pipelined multiple complex data streams. 12 references.

  11. Storage of hydrogen in floating catalytic carbon nanotubes after graphitizing

    Institute of Scientific and Technical Information of China (English)

    朱宏伟; 李雪松; 慈立杰; 徐才录; 毛宗强; 梁吉; 吴德海

    2002-01-01

    Hydrogen storage under moderate pressure (~10 Mpa) and ambient temperature (~25℃) in multi-walled carbon nanotubes (MWNTs) prepared by the floating catalyst method is investigated. The capacity of hydrogen adsorption is evaluated based on both the nanotubes diameter and morphology. Indirect evidence indicates that hydrogen adsorption not only occurs on tube surface and interiors, but also in tube interlayers. The results show that the floating catalytic carbon nanotubes might be a candidate hydrogen storage material for fuel cell electric vehicles.

  12. Study of a Floated Pendulum Accelerometer with Passive Magnetic Suspension

    OpenAIRE

    TAKIZAWA, Minoru; OOTSUKI, Masao; Suzuki, Takao; 滝沢, 実; 大月, 正男; 鈴木,孝雄

    1980-01-01

    In the last few years, in order to develop more precise inertial sensors, such as floated gyros and floated accelerometers used in the inertial navigation system, a passive magnetic suspension with an eight-pole stator, that can be applied to support the output axes of the sensors, has been theoretically and experimentally studied at NAL (National Aerospace Laboratory). In our previous reports, 7)~10)29) a theoretical analysis and an experimental study of the magnetic suspension were describe...

  13. Design of a reversible single precision floating point subtractor

    OpenAIRE

    Anantha Lakshmi, AV; Sudha, GF

    2014-01-01

    In recent years, Reversible logic has emerged as a major area of research due to its ability to reduce the power dissipation which is the main requirement in the low power digital circuit design. It has wide applications like low power CMOS design, Nano-technology, Digital signal processing, Communication, DNA computing and Optical computing. Floating-point operations are needed very frequently in nearly all computing disciplines, and studies have shown floating-point addition/subtraction to ...

  14. Condensation on surface energy gradient shifts drop size distribution toward small drops.

    Science.gov (United States)

    Macner, Ashley M; Daniel, Susan; Steen, Paul H

    2014-02-25

    During dropwise condensation from vapor onto a cooled surface, distributions of drops evolve by nucleation, growth, and coalescence. Drop surface coverage dictates the heat transfer characteristics and depends on both drop size and number of drops present on the surface at any given time. Thus, manipulating drop distributions is crucial to maximizing heat transfer. On earth, manipulation is achieved with gravity. However, in applications with small length scales or in low gravity environments, other methods of removal, such as a surface energy gradient, are required. This study examines how chemical modification of a cooled surface affects drop growth and coalescence, which in turn influences how a population of drops evolves. Steam is condensed onto a horizontally oriented surface that has been treated by silanization to deliver either a spatially uniform contact angle (hydrophilic, hydrophobic) or a continuous radial gradient of contact angles (hydrophobic to hydrophilic). The time evolution of number density and associated drop size distributions are measured. For a uniform surface, the shape of the drop size distribution is unique and can be used to identify the progress of condensation. In contrast, the drop size distribution for a gradient surface, relative to a uniform surface, shifts toward a population of small drops. The frequent sweeping of drops truncates maturation of the first generation of large drops and locks the distribution shape at the initial distribution. The absence of a shape change indicates that dropwise condensation has reached a steady state. Previous reports of heat transfer enhancement on chemical gradient surfaces can be explained by this shift toward smaller drops, from which the high heat transfer coefficients in dropwise condensation are attributed to. Terrestrial applications using gravity as the primary removal mechanism also stand to benefit from inclusion of gradient surfaces because the critical threshold size required for

  15. FORMULATION AND EVALUATION OF GASTRO RETENTIVE FLOATING TABLETS OF GLICLAZIDE

    Directory of Open Access Journals (Sweden)

    Thakkar Hardik Kumar Rajeshbhai

    2011-04-01

    Full Text Available A gastro retentive floating drug delivery system containing gliclazide was prepared in the form of tablet and evaluated for its processing parameters and in vitro release behaviour. Gliclazide is a selective second-generation sulphonyl urea used in treatment of hyperglycemia and it absorbs rapidly and completely. However its absorption is erratic in diabetic patient due to its impaired gastric motility or gastric emptying. To overcome these drawbacks, the present investigation was to develop a gastro retentive floating tablets of gliclazide. Ten formulations containing retardant materials such as hydroxypropylmethylcellulose K4M and K15M, sodium bicarbonate was used as a gas generating agent to reduce floating lag time and other release promoters. Tablets remained buoyant over 12 hours in the release medium, and the amount of sodium bicarbonate found to be significant for not only to remaining buoyant without causing disintegration of the tablet, but also to release of the drug in the acidic medium. Final F6 optimized formulation released approximately 99% drug in 12 hours in vitro, while the floating lag time was 39 sec and tablet remained floatable throughout all studies. In vitro gastro retentive study of tablets gave successful results by floating in gastric content over a period of 24 hours. The results of the current study clearly indicate, a promising potential of the gliclazide floating system as an alternative to the conventional dosage form.

  16. Evaluation of floating impeller phenomena in a Gyro centrifugal pump.

    Science.gov (United States)

    Nishimura, Ikuya; Ichikawa, S; Mikami, M; Ishitoya, H; Motomura, T; Kawamura, M; Linneweber, J; Glueck, J; Shinohara, T; Nosé, Y

    2013-01-01

    The Gyro centrifugal pump developed as a totally implantable artificial heart was designed with a free impeller, in which the rotational shaft (male bearing) of the impeller was completely separated from the female bearing. For this type of pump, it is very important to keep the proper magnet balance (impeller-magnet and actuator-magnet) in order to prevent thrombus formation and/or bearing wear. When the magnet balance is not proper, the impeller is jerked down into the bottom bearing. On the other hand, if magnet balance is proper, the impeller lifted off the bottom of the pump housing within a certain range of pumping conditions. In this study, this floating phenomenon was investigated in detail. The floating phenomenon was proved by observation of the impeller behavior using a transparent acrylic pump. The impeller floating phenomenon was mapped on a pump performance curve. The impeller floating phenomenon is affected by the magnet-magnet coupling distance and rotational speed of the impeller. In order to keep the proper magnet balance and to maintain the impeller floating phenomenon at the driving condition of right and left pump, the magnet-magnet coupling distance was altered by a spacer which was installed between the pump and actuator. It became clear that the same pump could handle different conditions (right and left ventricular assist), by just changing the thickness of the spacer. When magnet balance is proper, the floating impeller phenomenon occurs automatically in response to the impeller rev. It is called "the dynamic RPM suspension".

  17. Floating point representations in quantum circuit synthesis

    Science.gov (United States)

    Wiebe, Nathan; Kliuchnikov, Vadym

    2013-09-01

    We provide a non-deterministic quantum protocol that approximates the single qubit rotations Rx(2ϕ21ϕ22) using Rx(2ϕ1) and Rx(2ϕ2) and a constant number of Clifford and T operations. We then use this method to construct a ‘floating point’ implementation of a small rotation wherein we use the aforementioned method to construct the exponent part of the rotation and also to combine it with a mantissa. This causes the cost of the synthesis to depend more strongly on the relative (rather than absolute) precision required. We analyze the mean and variance of the T-count required to use our techniques and provide new lower bounds for the T-count for ancilla free synthesis of small single-qubit axial rotations. We further show that our techniques can use ancillas to beat these lower bounds with high probability. We also discuss the T-depth of our method and see that the vast majority of the cost of the resultant circuits can be shifted to parallel computation paths.

  18. Certifying floating-point implementations using Gappa

    CERN Document Server

    De Dinechin, Florent; Melquiond, Guillaume

    2008-01-01

    High confidence in floating-point programs requires proving numerical properties of final and intermediate values. One may need to guarantee that a value stays within some range, or that the error relative to some ideal value is well bounded. Such work may require several lines of proof for each line of code, and will usually be broken by the smallest change to the code (e.g. for maintenance or optimization purpose). Certifying these programs by hand is therefore very tedious and error-prone. This article discusses the use of the Gappa proof assistant in this context. Gappa has two main advantages over previous approaches: Its input format is very close to the actual C code to validate, and it automates error evaluation and propagation using interval arithmetic. Besides, it can be used to incrementally prove complex mathematical properties pertaining to the C code. Yet it does not require any specific knowledge about automatic theorem proving, and thus is accessible to a wide community. Moreover, Gappa may ge...

  19. Traumatic Floating Clavicle- A case report

    Science.gov (United States)

    Sopu, Alexandra; Green, Connor; Molony, Diarmuid

    2015-01-01

    Introduction: Shoulder injuries after high velocity trauma are common. Clavicle is affected in almost half of these cases. Even so, bipolar dislocation of the clavicle is an unusual injury and seldom reported in the literature. Conservative management is used for almost all the cases and only selected cases will undergo surgical treatment. Case Report: A 52 year old right electrician presented to the emergency department following a fall from a push bicycle. Plain radiographs identified a left first metacarpal (MC) fracture and a bipolar fracture of his right clavicle. Following Fracture Clinic review, significant deformity of the medial clavicle was noted and a CT scan showed anterior dislocation of the medial fragment. Given the degree of deformity and this functional requirement we felt that operative treatment was most appropriate for his unstable medial clavicle fracture dislocation. Conclusion: Surgical treatment of floating clavicle has an important role in the management of fit and active patients. It is important to identify the mechanism of injury and deforming forces in fractures and only after this to plan to neutralise these where appropriate. PMID:27299032

  20. Residents' perceptions of a night float system

    Directory of Open Access Journals (Sweden)

    Granieri Rosanne

    2009-08-01

    Full Text Available Abstract Background A Night Float (NF system has been implemented by many institutions to address increasing concerns about residents' work hours. The purpose of our study was to examine the perceptions of residents towards a NF system. Methods A 115-item questionnaire was developed to assess residents' perceptions of the NF rotation as compared with a regular call month. The categories included patient care, education, medical errors, and overall satisfaction. Internal Medicine housestaff (post-graduate years 1–3 from three hospital settings at the University of Pittsburgh completed the questionnaire. Results The response rate was 90% (n = 149. Of these, 74 had completed the NF rotation. The housestaff felt that the quality of patient care was improved because of NF (41% agreed and 18% disagreed. A majority also felt that better care was provided by a rested physician in spite of being less familiar with the patient (46% agreed and 21% disagreed. Most felt that there was less emphasis on education (65% and more emphasis on service (52% during NF. Overall, the residents felt more rested during their call months (83% and strongly supported the 80-hour workweek requirement (77%. Conclusion Housestaff felt that the overall quality of patient care was improved by a NF system. The perceived improved quality of care by a rested physician coupled with a perceived decrease in the emphasis on education may have significant implications in housestaff training.

  1. Entropie analysis of floating car data systems

    Directory of Open Access Journals (Sweden)

    F. Gössel

    2004-01-01

    Full Text Available The knowledge of the actual traffic state is a basic prerequisite of modern traffic telematic systems. Floating Car Data (FCD systems are becoming more and more important for the provision of actual and reliable traffic data. In these systems the vehicle velocity is the original variable for the evaluation of the current traffic condition. As real FCDsystems are operating under conditions of limited transmission and processing capacity the analysis of the original variable vehicle speed is of special interest. Entropy considerations are especially useful for the deduction of fundamental restrictions and limitations. The paper analyses velocity-time profiles by means of information entropy. It emphasises in quantification of the information content of velocity-time profiles and the discussion of entropy dynamic in velocity-time profiles. Investigations are based on empirical data derived during field trials. The analysis of entropy dynamic is carried out in two different ways. On one hand velocity differences within a certain interval of time are used, on the other hand the transinformation between velocities in certain time distances was evaluated. One important result is an optimal sample-rate for the detection of velocity data in FCD-systems. The influence of spatial segmentation and of different states of traffic was discussed.

  2. Floating geomembrane cover improves biogas collection

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, J.

    2009-07-15

    Canadian corn products refiner, Casco Inc., recently upgraded a wastewater anaerobic digester at its automated corn wet milling facility on the St. Lawrence River, in Cardinal Ontario. The upgrade includes an improved floating and insulated geomembrane cover, designed and installed by Geomembrane Technologies Inc. The cover effectively streamlines biogas collection, improves biogas odour control and optimizes bioreactor heat retention. Casco's bulk volume fermenter (BVF) was designed and built in 1988 by ADI Systems Inc. It is limited to receiving 641,000 gallons of wastewater per day from several areas of the plant. Wastewater sludge is usually treated by anaerobic digestion. At Casco, raw solids are added directly to the BVF bioreactor, where they are digested, minimizing waste sludge handling. In essence, anaerobic digestion is a renewable energy source which converts wastewater to a methane- and carbon dioxide-rich biogas suitable for energy production, replacing fossil fuels. The insulated geomembrane cover captures and reclaims all the biogas from the treatment process that is going on inside the tank. Without a cover, the biogas would be released to the atmosphere. The new geomembrane cover collects an average of 236,000 cubic feet of biogas per day, at a 65 per cent methane concentration, from the BVF bioreactor. 2 figs.

  3. The Drop Tower Bremen -An Overview

    Science.gov (United States)

    von Kampen, Peter; Könemann, Thorben; Rath, Hans J.

    The Center of Applied Space Technology and Microgravity (ZARM) was founded in 1985 as an institute of the University of Bremen, which focuses on research on gravitational and space-related phenomena. In 1988, the construction of ZARM`s drop tower began. Since its inau-guration in September 1990, the eye-catching Drop Tower Bremen with a height of 146m and its characteristic glass roof has become twice a landmark on the campus of the University of Bremen and the emblem of the technology park Bremen. As such an outstanding symbol of space science in Bremen the drop tower provides an european unique facility for experiments under conditions of high-quality weightlessness with residual gravitational accelerations in the microgravity regime. The period of maximum 4.74s of each freely falling experiment at the Drop Tower Bremen is only limited by the height of the drop tower vacuum tube, which was fully manufactured of steal and enclosed by an outer concrete shell. Thus, the pure free fall height of each microgravity drop experiment is approximately 110m. By using the later in-stalled catapult system established in 2004 ZARM`s short-term microgravity laboratory is able to nearly double the time of free fall. This world-wide inimitable capsule catapult system meets scientists` demand of extending the period of weightlessness. During the catapult operation the experiment capsule performs a vertical parabolic flight within the drop tower vacuum tube. In this way the time of microgravity can be extended to slightly over 9s. Either in the drop or in the catapult operation routine the repetition rates of microgravity experiments at ZARM`s drop tower facility are the same, generally up to 3 times per day. In comparison to orbital platforms the ground-based laboratory Drop Tower Bremen represents an economic alternative with a permanent access to weightlessness on earth. Moreover, the exceptional high quality of weightlessness in order of 1e-6 g (in the frequency range below 100

  4. Leidenfrost drops on a heated liquid pool

    CERN Document Server

    Maquet, Laurent; Darbois-Texier, Baptiste; Brandenbourger, Martin; Rednikov, Alexey; Colinet, Pierre; Dorbolo, Stéphane

    2016-01-01

    We show that a volatile liquid drop placed at the surface of a non-volatile liquid pool warmer than the boiling point of the drop can experience a Leidenfrost effect even for vanishingly small superheats. Such an observation points to the importance of the substrate roughness, negligible in the case considered here, in determining the threshold Leidenfrost temperature. A theoretical model based on the one proposed by Sobac et al. [Phys. Rev. E 90, 053011 (2014)] is developed in order to rationalize the experimental data. The shapes of the drop and of the substrate are analyzed. The model notably provides scalings for the vapor film thickness. For small drops, these scalings appear to be identical to the case of a Leidenfrost drop on a solid substrate. For large drops, in contrast, they are different and no evidence of chimney formation has been observed either experimentally or theoretically in the range of drop sizes considered in this study. Concerning the evaporation dynamics, the radius is shown to decrea...

  5. Interaction of Drops on a Soft Substrate

    Science.gov (United States)

    Lubbers, Luuk A.; Weijs, Joost H.; Das, Siddhartha; Botto, Lorenzo; Andreotti, Bruno; Snoeijer, Jacco H.

    2013-11-01

    A sessile drop can elastically deform a substrate by the action of capillary forces. The typical size of the deformation is given by the ratio of surface tension and the elastic modulus, γ / E , which can reach up to 10-100 microns for soft elastomers. In this talk we theoretically show that the contact angles of drops on such a surface exhibit two transitions when increasing γ / E : (i) the microsocopic geometry of the contact line first develops a Neumann-like cusp when γ / E is of the order of few nanometers, (ii) the macroscopic angle of the drop is altered only when γ / E reaches the size of the drop. Using the same framework we then show that two neighboring drops exhibit an effective interaction, mediated by the deformation of the elastic medium. This is in analogy to the well-known Cheerios effect, where small particles at a liquid interface attract eachother due to the meniscus deformations. Here we reveal the nature of drop-drop interactions on a soft substrate by combining numerical and analytical calculations.

  6. Drop impact splashing and air entrapment

    KAUST Repository

    Thoraval, Marie-Jean

    2013-03-01

    Drop impact is a canonical problem in fluid mechanics, with numerous applications in industrial as well as natural phenomena. The extremely simple initial configuration of the experiment can produce a very large variety of fast and complex dynamics. Scientific progress was made in parallel with major improvements in imaging and computational technologies. Most recently, high-speed imaging video cameras have opened the exploration of new phenomena occurring at the micro-second scale, and parallel computing allowed realistic direct numerical simulations of drop impacts. We combine these tools to bring a new understanding of two fundamental aspects of drop impacts: splashing and air entrapment. The early dynamics of a drop impacting on a liquid pool at high velocity produces an ejecta sheet, emerging horizontally in the neck between the drop and the pool. We show how the interaction of this thin liquid sheet with the air, the drop or the pool, can produce micro-droplets and bubble rings. Then we detail how the breakup of the air film stretched between the drop and the pool for lower impact velocities can produce a myriad of micro-bubbles.

  7. Conically shaped drops in electric fields

    Science.gov (United States)

    Stone, Howard A.; Brenner, Michael P.; Lister, John R.

    1996-11-01

    When an electric field is applied to a dielectric liquid containing a suspended immiscible fluid drop, the drop deforms into a prolate ellipsoidal shape. Above a critical field strength the drop develops conical ends, as first observed by Zeleny [Phys. Rev. 10, 1 (1917)] and Wilson & Taylor [Proc. Camb. Phil. Soc. 22, 728 (1925)] for, respectively, the case of conducting drops and soap films in air. The case of two dielectric liquids was studied recently using a slender drop approximation by Li, Halsey & Lobkovsky [Europhys. Lett 27, 575 (1994)]. In this presentation we further develop the slender body approximation to obtain coupled ordinary differential equations for the electric field and the drop shape. Analytical formulae are derived which approximately give the cone angle as a function of the dielectric constant ratio between the two fluids, and the minimum applied electric field at which conical tips first form as a function of the dielectric constant ratio. Finally, drops shapes are calculated numerically and compared with the common prolate shape assumption.

  8. Vibration-induced drop atomization and bursting

    Science.gov (United States)

    James, A. J.; Vukasinovic, B.; Smith, Marc K.; Glezer, A.

    2003-02-01

    A liquid drop placed on a vibrating diaphragm will burst into a fine spray of smaller secondary droplets if it is driven at the proper frequency and amplitude. The process begins when capillary waves appear on the free surface of the drop and then grow in amplitude and complexity as the acceleration amplitude of the diaphragm is slowly increased from zero. When the acceleration of the diaphragm rises above a well-defined critical value, small secondary droplets begin to be ejected from the free-surface wave crests. Then, quite suddenly, the entire volume of the drop is ejected from the vibrating diaphragm in the form of a spray. This event is the result of an interaction between the fluid dynamical process of droplet ejection and the vibrational dynamics of the diaphragm. During droplet ejection, the effective mass of the drop diaphragm system decreases and the resonance frequency of the system increases. If the initial forcing frequency is above the resonance frequency of the system, droplet ejection causes the system to move closer to resonance, which in turn causes more vigorous vibration and faster droplet ejection. This ultimately leads to drop bursting. In this paper, the basic phenomenon of vibration-induced drop atomization and drop bursting will be introduced, demonstrated, and characterized. Experimental results and a simple mathematical model of the process will be presented and used to explain the basic physics of the system.

  9. Organizations

    DEFF Research Database (Denmark)

    Hatch, Mary Jo

    Most of us recognize that organizations are everywhere. You meet them on every street corner in the form of families and shops, study in them, work for them, buy from them, pay taxes to them. But have you given much thought to where they came from, what they are today, and what they might become...... in the future? How and why do they have so much influence over us, and what influences them? How do they contribute to and detract from the meaningfulness of lives, and how might we improve them so they better serve our needs and desires? This Very Short Introductions addresses all of these questions...

  10. Terminal Effect of Drop Coalescence on Single Drop Mass Transfer Measurements and Its Minimization

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    For the mass transfer to single drops during the stage of steady buoyancy-driven motion, experimental measurement is complicated with the terminal effect of additional mass transfer during drop formation and coa lescence at the drop collector. Analysis reveals that consistent operating conditions and experimental procedure are of critical significance for minimizing the terminal effect of drop coalescence on the accuracy of mass transfer measurements. The novel design of a totally-closed extraction column is proposed for this purpose, which guaran tees that the volumetric rate of drop phase injection is exactly equal to that of withdrawal of drops. Tests in two extraction systems demonstrate that the experimental repeatability is improved greatly and the terminal effect of mass transfer during drop coalescence is brought well under control.

  11. Laplacian drop shapes and effect of random perturbations on accuracy of surface tension measurement for different drop constellations.

    Science.gov (United States)

    Saad, Sameh M I; Neumann, A Wilhelm

    2015-08-01

    Theoretical drop shapes are calculated for three drop constellations: pendant drops, constrained sessile drops, and unconstrained sessile drops. Based on total Gaussian curvature, shape parameter and critical shape parameter are discussed as a function of different drop sizes and surface tensions. The shape parameter is linked to physical parameters for every drop constellation. The as yet unavailable detailed dimensional analysis for the unconstrained sessile drop is presented. Results show that the unconstrained sessile drop shape depends on a dimensionless volume term and the contact angle. Random perturbations are introduced and the accuracy of surface tension measurement is assessed for precise and perturbed profiles of the three drop constellations. It is concluded that pendant drops are the best method for accurate surface tension measurement, followed by constrained sessile drops. The unconstrained sessile drops come last because they tend to be more spherical at low and moderate contact angles. Of course, unconstrained sessile drops are the only option if contact angles are to be measured.

  12. Nanofluid Drop Evaporation: Experiment, Theory, and Modeling

    Science.gov (United States)

    Gerken, William James

    Nanofluids, stable colloidal suspensions of nanoparticles in a base fluid, have potential applications in the heat transfer, combustion and propulsion, manufacturing, and medical fields. Experiments were conducted to determine the evaporation rate of room temperature, millimeter-sized pendant drops of ethanol laden with varying amounts (0-3% by weight) of 40-60 nm aluminum nanoparticles (nAl). Time-resolved high-resolution drop images were collected for the determination of early-time evaporation rate (D2/D 02 > 0.75), shown to exhibit D-square law behavior, and surface tension. Results show an asymptotic decrease in pendant drop evaporation rate with increasing nAl loading. The evaporation rate decreases by approximately 15% at around 1% to 3% nAl loading relative to the evaporation rate of pure ethanol. Surface tension was observed to be unaffected by nAl loading up to 3% by weight. A model was developed to describe the evaporation of the nanofluid pendant drops based on D-square law analysis for the gas domain and a description of the reduction in liquid fraction available for evaporation due to nanoparticle agglomerate packing near the evaporating drop surface. Model predictions are in relatively good agreement with experiment, within a few percent of measured nanofluid pendant drop evaporation rate. The evaporation of pinned nanofluid sessile drops was also considered via modeling. It was found that the same mechanism for nanofluid evaporation rate reduction used to explain pendant drops could be used for sessile drops. That mechanism is a reduction in evaporation rate due to a reduction in available ethanol for evaporation at the drop surface caused by the packing of nanoparticle agglomerates near the drop surface. Comparisons of the present modeling predictions with sessile drop evaporation rate measurements reported for nAl/ethanol nanofluids by Sefiane and Bennacer [11] are in fairly good agreement. Portions of this abstract previously appeared as: W. J

  13. Deviation of viscous drops at chemical steps

    CERN Document Server

    Semprebon, Ciro; Filippi, Daniele; Perlini, Luca; Pierno, Matteo; Brinkmann, Martin; Mistura, Giampaolo

    2016-01-01

    We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a contact line mobility model showing that contact angle hysteresis dominates the dynamics at the step and determines whether the drop passes onto the lower substrate. This analysis is very well supported by the experimental dynamic phase diagram in terms of pinning, crossing, sliding and sliding followed by pinning.

  14. New Hydrodynamic Mechanism for Drop Coarsening

    CERN Document Server

    Nikolayev, Vadim; Guenoun, Patrick

    2016-01-01

    We discuss a new mechanism of drop coarsening due to coalescence only, which describes the late stages of phase separation in fluids. Depending on the volume fraction of the minority phase, we identify two different regimes of growth, where the drops are interconnected and their characteristic size grows linearly with time, and where the spherical drops are disconnected and the growth follows (time) 1/3. The transition between the two regimes is sharp and occurs at a well defined volume fraction of order 30%.

  15. On the Deepwater Horizon drop size distributions

    Science.gov (United States)

    Ryerson, T. B.; Atlas, E. L.; Blake, D. R.; De Gouw, J. A.; Warneke, C.; Peischl, J.; Brock, C. A.; McKeen, S. A.

    2014-12-01

    Model simulations of the fate of gas and oil released following the Deepwater Horizon blowout in 2012 depend critically on the assumed drop size distributions. We use direct observations of surfacing time, surfacing location, and atmospheric chemical composition to infer an average drop size distribution for June 10, 2012, providing robust first-order constraints on parameterizations in models. We compare the inferred drop size distribution to published work on Deepwater Horizon and discuss the ability of this approach to determine the efficacy of subsurface dispersant injection.

  16. HF readmissions drop after initiatives.

    Science.gov (United States)

    2014-06-01

    By analyzing heart failure readmissions and collaborating with post-acute providers and community organizations, Essentia Health-St. Joseph's Medical Center in Brainerd, MN, cut its readmission rate from 18% to a low of 6%. An interdisciplinary team analyzed readmissions, interviewed patients who were readmitted, and developed the program. Initiatives include setting primary care appointments while patients are in the hospital, following up after discharge, and creating order sets that include best practices. The hospital staff meet regularly with post-acute providers and social service agencies to brainstorm ways to create smoother transitions and ensure that patients get what they need after discharge.

  17. Design of a reversible single precision floating point subtractor.

    Science.gov (United States)

    Anantha Lakshmi, Av; Sudha, Gf

    2014-01-04

    In recent years, Reversible logic has emerged as a major area of research due to its ability to reduce the power dissipation which is the main requirement in the low power digital circuit design. It has wide applications like low power CMOS design, Nano-technology, Digital signal processing, Communication, DNA computing and Optical computing. Floating-point operations are needed very frequently in nearly all computing disciplines, and studies have shown floating-point addition/subtraction to be the most used floating-point operation. However, few designs exist on efficient reversible BCD subtractors but no work on reversible floating point subtractor. In this paper, it is proposed to present an efficient reversible single precision floating-point subtractor. The proposed design requires reversible designs of an 8-bit and a 24-bit comparator unit, an 8-bit and a 24-bit subtractor, and a normalization unit. For normalization, a 24-bit Reversible Leading Zero Detector and a 24-bit reversible shift register is implemented to shift the mantissas. To realize a reversible 1-bit comparator, in this paper, two new 3x3 reversible gates are proposed The proposed reversible 1-bit comparator is better and optimized in terms of the number of reversible gates used, the number of transistor count and the number of garbage outputs. The proposed work is analysed in terms of number of reversible gates, garbage outputs, constant inputs and quantum costs. Using these modules, an efficient design of a reversible single precision floating point subtractor is proposed. Proposed circuits have been simulated using Modelsim and synthesized using Xilinx Virtex5vlx30tff665-3. The total on-chip power consumed by the proposed 32-bit reversible floating point subtractor is 0.410 W.

  18. Spreading of liquid drops over porous substrates.

    Science.gov (United States)

    Starov, V M; Zhdanov, S A; Kosvintsev, S R; Sobolev, V D; Velarde, M G

    2003-07-01

    The spreading of small liquid drops over thin and thick porous layers (dry or saturated with the same liquid) has been investigated in the case of both complete wetting (silicone oils of different viscosities) and partial wetting (aqueous SDS solutions of different concentrations). Nitrocellulose membranes of different porosity and different average pore size have been used as a model of thin porous layers, glass and metal filters have been used as a model of thick porous substrates. The first problem under investigation has been the spreading of small liquid drops over thin porous layers saturated with the same liquid. An evolution equation describing the drop spreading has been deduced, which showed that both an effective lubrication and the liquid exchange between the drop and the porous substrates are equally important. Spreading of silicone oils over different nitrocellulose microfiltration membranes was carried out. The experimental laws of the radius of spreading on time confirmed the theory predictions. The spreading of small liquid drops over thin dry porous layers has also been investigated from both theoretical and experimental points of view. The drop motion over a dry porous layer appears caused by the interplay of two processes: (a). the spreading of the drop over already saturated parts of the porous layer, which results in a growth of the drop base, and (b). the imbibition of the liquid from the drop into the porous substrate, which results in a shrinkage of the drop base and a growth of the wetted region inside the porous layer. As a result of these two competing processes the radius of the drop base goes through a maximum as time proceeds. A system of two differential equations has been derived to describe the time evolution of the radii of both the drop base and the wetted region inside the porous layer. This system includes two parameters, one accounts for the effective lubrication coefficient of the liquid over the wetted porous substrate, and

  19. Electric field induced deformation of sessile drops

    Science.gov (United States)

    Corson, Lindsey; Tsakonas, Costas; Duffy, Brian; Mottram, Nigel; Brown, Carl; Wilson, Stephen

    2014-11-01

    The ability to control the shape of a drop with the application of an electric field has been exploited for many technological applications including measuring surface tension, producing an optical display device, and optimising the optical properties of microlenses. In this work we consider, both theoretically and experimentally, the deformation of pinned sessile drops with contact angles close to either 0° or 90° resting on the lower substrate inside a parallel plate capacitor due to an A.C. electric field. Using both asymptotic and numerical approaches we obtain predictive equations for the static and dynamic drop shape deformations as functions of the key experimental parameters (drop size, capacitor plate separation, electric field magnitude and contact angle). The asymptotic results agree well with the experimental results for a range of liquids. We gratefully acknowledge the financial support of EPSRC via research Grants EP/J009865 and EP/J009873.

  20. How to Use Nose Drops Properly

    Science.gov (United States)

    ... Use nose drops only as long as directed Store medications out of reach of children Copyright 2013, American Society of Health-System Pharmacists. All rights reserved. This material may not be reproduced, displayed, modified, or distributed ...

  1. How to Use Eye Drops Properly

    Science.gov (United States)

    ... doses Use the exact number of drops recommended Store medications out of reach of children Copyright 2013, American Society of Health-System Pharmacists. All rights reserved. This material may not be reproduced, displayed, modified, or distributed ...

  2. Drop impact of shear thickening liquids

    CERN Document Server

    Boyer, Francois; Dijksman, J Frits; Lohse, Detlef

    2013-01-01

    The impact of drops of concentrated non-Brownian suspensions (cornstarch and polystyrene spheres) onto a solid surface is investigated experimentally. The spreading dynamics and maxi- mal deformation of the droplet of such shear thickening liquids are found to be markedly different from the impact of Newtonian drops. A particularly striking observation is that the maximal de- formation is independent of the drop velocity and that the deformation suddenly stops during the impact phase. Both observations are due to the shear-thickening rheology of the suspensions, as is theoretically explained from a balance between the kinetic energy and the viscously-dissipated en- ergy, from which we establish a scaling relation between drop maximal deformation and rheological parameters of concentrated suspensions.

  3. Micro-splashing by drop impacts

    KAUST Repository

    Thoroddsen, Sigurdur T.

    2012-07-18

    We use ultra-high-speed video imaging to observe directly the earliest onset of prompt splashing when a drop impacts onto a smooth solid surface. We capture the start of the ejecta sheet travelling along the solid substrate and show how it breaks up immediately upon emergence from the underneath the drop. The resulting micro-droplets are much smaller and faster than previously reported and may have gone unobserved owing to their very small size and rapid ejection velocities, which approach 100 m s-1, for typical impact conditions of large rain drops. We propose a phenomenological mechanism which predicts the velocity and size distribution of the resulting microdroplets. We also observe azimuthal undulations which may help promote the earliest breakup of the ejecta. This instability occurs in the cusp in the free surface where the drop surface meets the radially ejected liquid sheet. © 2012 Cambridge University Press.

  4. Total Gaussian curvature, drop shapes and the range of applicability of drop shape techniques.

    Science.gov (United States)

    Saad, Sameh M I; Neumann, A Wilhelm

    2014-02-01

    Drop shape techniques are used extensively for surface tension measurement. It is well-documented that, as the drop/bubble shape becomes close to spherical, the performance of all drop shape techniques deteriorates. There have been efforts quantifying the range of applicability of drop techniques by studying the deviation of Laplacian drops from the spherical shape. A shape parameter was introduced in the literature and was modified several times to accommodate different drop constellations. However, new problems arise every time a new configuration is considered. Therefore, there is a need for a universal shape parameter applicable to pendant drops, sessile drops, liquid bridges as well as captive bubbles. In this work, the use of the total Gaussian curvature in a unified approach for the shape parameter is introduced for that purpose. The total Gaussian curvature is a dimensionless quantity that is commonly used in differential geometry and surface thermodynamics, and can be easily calculated for different Laplacian drop shapes. The new definition of the shape parameter using the total Gaussian curvature is applied here to both pendant and constrained sessile drops as an illustration. The analysis showed that the new definition is superior and reflects experimental results better than previous definitions, especially at extreme values of the Bond number.

  5. Fluid Flower : Microliquid Patterning via Drop Impact

    CERN Document Server

    Lee, Minhee

    2008-01-01

    In microfluidic technologies, direct patterning of liquid without resorting to micromachined solid structures has various advantages including reduction of the frictional dissipation and the fabrication cost. This fluid dynamics video illustrates the method to micropattern a liquid on a solid surface with drop impact. We experimentally show that a water drop impacting with the wettability-patterned solid retracts fast on the hydrophobic regions while being arrested on the hydrophilic areas.

  6. Blood drop patterns: Formation and applications.

    Science.gov (United States)

    Chen, Ruoyang; Zhang, Liyuan; Zang, Duyang; Shen, Wei

    2016-05-01

    The drying of a drop of blood or plasma on a solid substrate leads to the formation of interesting and complex patterns. Inter- and intra-cellular and macromolecular interactions in the drying plasma or blood drop are responsible for the final morphologies of the dried patterns. Changes in these cellular and macromolecular components in blood caused by diseases have been suspected to cause changes in the dried drop patterns of plasma and whole blood, which could be used as simple diagnostic tools to identify the health of humans and livestock. However, complex physicochemical driving forces involved in the pattern formation are not fully understood. This review focuses on the scientific development in microscopic observations and pattern interpretation of dried plasma and whole blood samples, as well as the diagnostic applications of pattern analysis. Dried drop patterns of plasma consist of intricate visible cracks in the outer region and fine structures in the central region, which are mainly influenced by the presence and concentration of inorganic salts and proteins during drying. The shrinkage of macromolecular gel and its adhesion to the substrate surface have been thought to be responsible for the formation of the cracks. Dried drop patterns of whole blood have three characteristic zones; their formation as functions of drying time has been reported in the literature. Some research works have applied engineering treatment to the evaporation process of whole blood samples. The sensitivities of the resultant patterns to the relative humidity of the environment, the wettability of the substrates, and the size of the drop have been reported. These research works shed light on the mechanisms of spreading, evaporation, gelation, and crack formation of the blood drops on solid substrates, as well as on the potential applications of dried drop patterns of plasma and whole blood in diagnosis.

  7. Combustion of liquid fuels floating on water

    Directory of Open Access Journals (Sweden)

    Garo Jean-Pierre

    2007-01-01

    Full Text Available The research presented consists of a study of the burning characteristics of a liquid fuel floating on water with emphasis in the phenomena known as boilover. The problem is of technical interest in the petro-chemical industry, particularly from the point of view of pollution and fires resulting from accidental liquid fuel spills in open water. Testing with multicomponent fuels gives information's about events that can occur in a practical situation, while testing with single component fuels permits obtaining fundamental information about the problem. It evidences the major effects caused by the transfer of heat from the fuel to the water underneath. One of these effects is the disruptive burning of the fuel known as boilover, that is caused by the water boiling and splashing, and results in a sharp increase in burning rate and often in the explosive burning of the fuel. It is shown that this event is caused by the onset of water boiling nucleation at the fuel/water interface and that it occurs at an approximate constant temperature that is above the saturation temperature of the water (water is superheated. These measurements conducted in two laboratories, address the major issues of the process by analyzing the effect of the variation of the parameters of the problem (initial fuel-layer thickness, pool diameter, and fuel type, on the burning rate, time to start of boilover, pre-boilover mass ratio, and boilover intensity. Finally, two types of modeling are proposed to describe the heat transfer in fuel and water phases: one simple for practical purposes, the other, more elaborated and transient, taking particularly into consideration the radiation in depth.

  8. Achieving Universal Primary Education: A Case Study of Drop Out in Ghana.

    OpenAIRE

    2016-01-01

    Drop out among school children especially at the basic school level has over the years gained the attention of many ministries of education, international organizations and scholars in the academia. It is said to inhabit threat to achieving universal primary education (UPE) everywhere, especially in Sub-Saharan Africa. To some recent studies, the phenomenon of drop out is said to be somewhat responsible for increased crime in some parts of Africa. It is the goal of this study to understand wh...

  9. Drop Performance Test of CRDMs for JRTR

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung-Hwan; Cho, Yeong-Garp; Chung, Jong-Ha [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Jung-Hyun [POSCO Plandtec Co. Ltd, Ulsan (Korea, Republic of); Lee, Kwan-Hee [RIST, Pohang (Korea, Republic of)

    2015-10-15

    The drop test results of CRDMs with AC-type electromagnet show that the initial delay times are not satisfied with the requirement, 0.15 seconds. After the replacement of the electromagnet from AC-type to DCtype, the drop times of CARs and accelerations due to the impact of moving parts are satisfied with all requirements. As a result, it is found that four CRDMs to be installed at site have a good drop performance, and meet all performance requirements. A control rod drive mechanism (CRDM) is a device to control the position of a control absorber rod (CAR) in the core by using a stepping motor which is commanded by the reactor regulating system (RRS) to control the reactivity during the normal operation of the reactor. The top-mounted CRDM driven by the stepping motor for Jordan Research and Training Reactor (JRTR) has been developed in KAERI. The CRDM for JRTR has been optimized by the design improvement based on that of the HANARO. It is necessary to verify the performances such as the stepping, drop, endurance, vibration, seismic and structural integrity for active components. Especially, the CAR drop curves are important data for the safety analysis. This paper describes the test results to demonstrate the drop performances of a prototype and 4 CRDMs to be installed at site. The tests are carried out at a test rig simulating the actual reactor's conditions.

  10. Transition Mode Shapes in a Vibrating Drop

    Science.gov (United States)

    Vukasinovic, Bojan; Smith, Marc K.; Glezer, Ari

    2000-11-01

    Vertical, time-periodic vibration of a diaphragm has been used to atomize a primary sessile drop into a fine spray of secondary droplets. The evolution and rate of atomization depend on the coupled dynamics of the sessile drop and the piezoelectrically-driven, low-mass diaphragm. The evolution of the free surface of the drop is characterized by the appearance of a hierarchy of surface waves that we investigated using high-speed imaging and laser vibrometry. At low-driving amplitudes, we see the appearance of time-harmonic axisymmetric waves on the drop's free surface induced by the motion of the contact line. As the vibration amplitude increases, azimuthal waves at the subharmonic of the forcing frequency appear around the periphery of the drop and propagate towards its center. A striking lattice mode emerges upon the breakdown of the axisymmetric wave pattern, followed by the appearance of the highly-agitated free surface of the pre-ejection mode shape. Subsequent to the breakdown of the lattice structure, the frequency of the most energetic mode is a subharmonic of the driving frequency. The complex interaction of the fundamental and subharmonic waves ultimately leads to the breakdown of the free surface and the atomization of the drop.

  11. A floating macro/mesoporous crystalline anatase TiO2 ceramic with enhanced photocatalytic performance for recalcitrant wastewater degradation.

    Science.gov (United States)

    Xing, Zipeng; Zhou, Wei; Du, Fan; Qu, Yang; Tian, Guohui; Pan, Kai; Tian, Chungui; Fu, Honggang

    2014-01-14

    A macro/mesoporous anatase TiO2 ceramic floating photocatalyst has been successfully synthesized using highly thermally stable mesoporous TiO2 powder as a precursor, followed by a camphene-based freeze-casting process and high-temperature calcinations. The ceramics are characterized in detail by X-ray diffraction, Raman spectra, scanning electron microscopy, transmission electron microscopy and N2 adsorption-desorption isotherms. The results indicate that the TiO2 ceramics present hierarchical macro/mesoporous structures, which maintain high porosity and high compressive strength at the optimal sintering temperature of 800 °C. The ordered mesoporous TiO2 network still possesses high thermal stability and inhibits the anatase-to-rutile phase transformation during calcinations. The obtained ceramics exhibit good adsorptive and photocatalytic activity for the degradation of octane and rhodamine B, and the total organic carbon removal ratio is up to 98.8% and 98.6% after photodegradation for 3 h, respectively. The roles of active species in the photocatalytic process are compared using different types of active species scavengers, and the degradation mechanism is also proposed. Furthermore, the ceramics are recyclable, and no clear changes are observed after ten cycles. In addition, the ceramics are also active in the photodegradation of phenol, thiobencarb, and atrazine. Therefore, these novel floating photocatalysts will have wide applications, including the removal of floating organic pollutants from the wastewater surfaces or the removal of soluble organic pollutants from wastewater.

  12. Spreading of Electrolyte Drops on Charged Surfaces: Electric Double Layer Effects on Drop Dynamics

    Science.gov (United States)

    Bae, Kyeong; Sinha, Shayandev; Chen, Guang; Das, Siddhartha

    2015-11-01

    Drop spreading is one of the most fundamental topics of wetting. Here we study the spreading of electrolyte drops on charged surfaces. The electrolyte solution in contact with the charged solid triggers the formation of an electric double layer (EDL). We develop a theory to analyze how the EDL affects the drop spreading. The drop dynamics is studied by probing the EDL effects on the temporal evolution of the contact angle and the base radius (r). The EDL effects are found to hasten the spreading behaviour - this is commensurate to the EDL effects causing a ``philic'' tendency in the drops (i.e., drops attaining a contact angle smaller than its equilibrium value), as revealed by some of our recent papers. We also develop scaling laws to illustrate the manner in which the EDL effects make the r versus time (t) variation deviate from the well known r ~tn variation, thereby pinpointing the attainment of different EDL-mediated spreading regimes.

  13. Control implementation for the SPUR floating point coprocessor

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, D.

    1987-01-01

    SPUR is a RISC-based multiprocessor workstation being designed to facilitate parallel-processing research. Typically, RISC architectures achieve low performance levels for floating-point intensive applications, as the multiple-cycle floating-point instructions are not implemented in the hardware. In an attempt to raise these performance levels, the SPUR system provides floating-point support through an extended instruction set and tightly-coupled floating-point coprocessor. This report documents the implementation of the control unit for this floating-point coprocessor; describing the coprocessor interface, control PLA definitions, the finite state machine, the dynamic cycle counter, the 4-stage load-store pipeline, and the random logic generated to drive the datapath modules. Implementation techniques and trade-offs are discussed; including design strategy, area and speed optimization, noise margin considerations, and delay balancing rf the datapath control signals for clock skew minimization. Finally, in an attempt to raise these performance levels, the SPUR system The chip is implemented in 2-layer-metal 2..mu..m CMOS technology, and uses a four-phase non-overlapping clock with a target cycle time of approximately 100ns - 140 ns.

  14. The Unified Floating Point Vector Coprocessor for Reconfigurable Hardware

    Science.gov (United States)

    Kathiara, Jainik

    There has been an increased interest recently in using embedded cores on FPGAs. Many of the applications that make use of these cores have floating point operations. Due to the complexity and expense of floating point hardware, these algorithms are usually converted to fixed point operations or implemented using floating-point emulation in software. As the technology advances, more and more homogeneous computational resources and fixed function embedded blocks are added to FPGAs and hence implementation of floating point hardware becomes a feasible option. In this research we have implemented a high performance, autonomous floating point vector Coprocessor (FPVC) that works independently within an embedded processor system. We have presented a unified approach to vector and scalar computation, using a single register file for both scalar operands and vector elements. The Hybrid vector/SIMD computational model of FPVC results in greater overall performance for most applications along with improved peak performance compared to other approaches. By parameterizing vector length and the number of vector lanes, we can design an application specific FPVC and take optimal advantage of the FPGA fabric. For this research we have also initiated designing a software library for various computational kernels, each of which adapts FPVC's configuration and provide maximal performance. The kernels implemented are from the area of linear algebra and include matrix multiplication and QR and Cholesky decomposition. We have demonstrated the operation of FPVC on a Xilinx Virtex 5 using the embedded PowerPC.

  15. A Fast Floating Point Double Precision Implementation on Fpga

    Directory of Open Access Journals (Sweden)

    Monika Maan

    2016-06-01

    Full Text Available In the modern day digital systems, floating point units are an important component in many signal and image processing applications. Many approaches of the floating point units have been proposed and compared with their counterparts in recent years. IEEE 754 floating point standard allows two types of precision units for floating point operations, single and double. In the proposed architecture double precision floating point unit is used and basic arithmetic operations are performed. A parallel architecture is proposed along with the high speed adder, which is shared among other operations and can perform operations independently as a separate unit. To improve the area efficiency of the unit, carry select adder is designed with the novel resource sharing technique which allows performing the operations with the minimum usage of the resources while computing the carry and sum for „0‟ and „1‟. The design is implemented using the Xilinx Spartan 6 FPGA and the results show the 23% improvement in the speed of the designed circuit.

  16. The coolest 'stars' are free-floating planets

    CERN Document Server

    Joergens, V; Liu, Y; Bayo, A; Wolf, S

    2014-01-01

    We show that the coolest known object that is probably formed in a star-like mode is a free-floating planet. We discovered recently that the free-floating planetary mass object OTS,44 (M9.5, ~12 Jupiter masses, age ~2 Myr) has significant accretion and a substantial disk. This demonstrates that the processes that characterize the canonical star-like mode of formation apply to isolated objects down to a few Jupiter masses. We detected in VLT/SINFONI spectra that OTS44 has strong, broad, and variable Paschen beta emission. This is the first evidence for active accretion of a free-floating planet. The object allows us to study accretion and disk physics at the extreme and can be seen as free-floating analog of accreting planets that orbit stars. Our analysis of OTS44 shows that the mass-accretion rate decreases continuously from stars of several solar masses down to free-floating planets. We determined, furthermore, the disk mass (10 Earth masses) and further disk properties of OTS44 through modeling its SED inc...

  17. Preparation and evaluation of gastroretentive floating tablets of Silymarin.

    Science.gov (United States)

    Garg, Rajeev; Gupta, Ghanshyam Das

    2009-06-01

    The present study performed by preparation and evaluation of floating tablets of Silymarin as model drug for prolongation of gastric residence time. Floating effervescent tablets were formulated by various materials like hydroxypropyl methylcellulose (HPMC) K 4M, K 15M, psyllium husk, swelling agent as crospovidone and microcrystalline cellulose and gas generating agent like sodium bicarbonate and citric acid and evaluated for floating properties, swelling characteristics and in vitro drug release studies. Floating noneffervescent tablets were prepared by polypropylene foam powder and different matrix forming polymers like HPMC K 4M, Carbopol 934P, xanthan gum and sodium alginate. In vitro drug release studies were performed and drug release kinetics evaluated using the linear regression method was found to follow both the Higuchi and the Korsemeyer and Peppas equation. The drug release mechanism was found fickian type in most of the formulations. The developed floating tablets of Silymarin may be used in clinic for prolonged drug release for at least 24 h, thereby improving the bioavailability and patient compliance.

  18. Rain Drops and Oil Slicks: Impact of Water Droplets on a Surface Oil Layer

    Science.gov (United States)

    Murphy, David; Morra, David; Katz, Joseph

    2013-11-01

    Petroleum spills in aquatic environments form oil slicks on the water surface. These slicks, the thickness of which ranges from microns to several millimeters, negatively impact the natural environment and economic resources. While dispersion of these slicks as small droplets by breaking waves has long been investigated, the dispersive power of another environmental flow, rainfall, has not been considered. The impact of a water drop on a floating layer of immiscible fluid introduces a challenging flow physics problem. Our experimental observations examine processes occurring when falling water droplets impact on floating layers of sweet petroleum crude oil of various thicknesses and dispersant concentrations. The latter alter the surface tension by orders of magnitude. Impact events recorded at high-speed, using UV light to cause oil fluorescence, show the expected formation of modified multiphase Worthington jets, air cavities, as well as breakup of the slicks into clouds of oil droplets and oil-coated bubbles. The latter rise back to the surface and pop. Results include droplet size and spatial distributions as a function of rainfall momentum, oil properties, and processes involved. Sponsored by Gulf of Mexico Research Initiative (GoMRI).

  19. Rabbit droppings as an organic fertilizer in earthen ponds, to ...

    African Journals Online (AJOL)

    cntaganda

    Nine earthen ponds of 400 m2 were stocked with mixed sexes of Nile tilapia. Oreochromis niloticus ... the effect of rabbit dung on the quality of fish pond water, and the growth ... The author recommended, for extension purposes, a load-rate of 60 ...... dynamics model for the ecological analysis of integrated aquaculture/ ...

  20. Conversion Disorder; an Unusual Etiology of Unilateral Foot Drop.

    Science.gov (United States)

    Ayaz, Saeed Bin; Matee, Sumeera; Malik, Riffat; Ahmad, Khalil

    2015-06-01

    Foot drop is generally a consequence of common peroneal or sciatic nerve injury or L5 radiculopathy but rarely, it can be a manifestation of conversion disorder. A 24-year-old male presented with a foot drop on left side that developed overnight. He had difficulty walking with a trunk tilt towards right side and numbness in left leg up to mid-thigh. The initial diagnosis by the general practitioner was common peroneal nerve injury, which was not supported by the subsequent detailed examination in the physiatry department. Routine laboratory investigations, computed tomographic scan of brain and electrophysiological evaluation were normal. In a multidisciplinary team evaluation involving a psychiatrist, he was diagnosed to be suffering from conversion disorder and was advised gait retraining, cognitive and behavioral therapy and tablet venlafaxine. By sixth day of treatment, the patient was able to walk independently with a normal gait pattern and reported complete recovery of his symptoms. In the absence of an identifiable organic cause of foot drop in a patient, conversion disorder may be considered necessitating early intervention by a psychiatrist.

  1. Charge and Size Distributions of Electrospray Drops

    Science.gov (United States)

    de Juan L; de la Mora JF

    1997-02-15

    The distributions of charge q and diameter d of drops emitted from electrified liquid cones in the cone-jet mode are investigated with two aerosol instruments. A differential mobility analyzer (DMA, Vienna type) first samples the spray drops, selects those with electrical mobilities within a narrow band, and either measures the associated current or passes them to a second instrument. The drops may also be individually counted optically and sized by sampling them into an aerodynamic size spectrometer (API's Aerosizer). For a given cone-jet, the distribution of charge q for the main electrospray drops is some 2.5 times broader than their distribution of diameters d, with qmax/qmin approximately 4. But mobility-selected drops have relative standard deviations of only 5% for both d and q, showing that the support of the (q, d) distribution is a narrow band centered around a curve q(d). The approximate one-dimensionality of this support region is explained through the mechanism of jet breakup, which is a random process with only one degree of freedom: the wavelength of axial modulation of the jet. The observed near constancy of the charge over volume ratio (q approximately d3) shows that the charge is frozen in the liquid surface at the time scale of the breakup process. The charge over volume ratio of the primary drops varies between 98 and 55% of the ratio of spray current I over liquid flow rate Q, and decreases at increasing Q. I/Q is therefore an unreliable measure of the charge density of these drops.

  2. Shape oscillation of a levitated drop in an acoustic field

    CERN Document Server

    Ran, Weiyu

    2013-01-01

    A `star drop' refers to the patterns created when a drop, flattened by some force, is excited into shape mode oscillations. These patterns are perhaps best understood as the two dimensional analog to the more common three dimensional shape mode oscillations. In this fluid dynamics video an ultrasonic standing wave was used to levitate a liquid drop. The drop was then flattened into a disk by increasing the field strength. This flattened drop was then excited to create star drop patterns by exciting the drop at its resonance frequency. Different oscillatory modes were induced by varying the drop radius, fluid properties, and frequency at which the field strength was modulated.

  3. Polyester mooring stiffness modeling for deepwater floating system

    Institute of Scientific and Technical Information of China (English)

    Chen Yongjun; Qu Yan; Zhang Tianyu

    2013-01-01

    Polyester mooring has become increasing popular to serve as permanent station-keeping system for deepwater floating system during recent years.Comparing to the traditional steel wire mooring,polyester mooring provides significant benefits in deepwater,such as reduced installed capital expenditure (CAPEX) and smaller vertical loads on host platform.Polyester rope is a visco-elastic material,and its stiffness is nonlinear and affected by mean load,load range,loading period and loading history.There is a perception that the polyester stiffness model has significant impact on the floating system' s performance.This paper presents a detailed description and comparison of two stiffness models and three analytic approaches,and provides a systematic study of the impact of polyester mooring stiffness modeling on the deepwater floating system performance.

  4. Floating point hardware emulator for RSX-11D

    Energy Technology Data Exchange (ETDEWEB)

    Kellogg, M.; Long, M.

    1977-01-01

    An RSX-11D task was written to simulate the FP-11 floating point hardware on systems that lack this hardware. The simulation is transparent to tasks using floating point instructions. All normal features of the hardware are simulated exactly, including its action on exception conditions. The emulator is a privileged task occupying about 2.7K words of memory. When it is loaded and run, it sets up a linkage to intercept the reserved instruction trap before it reaches the executive, and route it to a service routine that can decode and simulate the floating point instruction set. The results of a benchmark timing test are given, as are notes on converting the emulator to run under RSX-11M. 1 figure, 2 tables.

  5. VLSI design techniques for floating-point computation

    Energy Technology Data Exchange (ETDEWEB)

    Bose, B. K.

    1988-01-01

    The thesis presents design techniques for floating-point computation in VLSI. A basis for area-time design decisions for arithmetic and memory operations is formulated from a study of computationally intensive programs. Tradeoffs in the design and implementation of an efficient coprocessor interface are studied, together with the implications of hardware support for the IEEE Floating-Point Standard. Algorithm area-time tradeoffs for basic arithmetic functions are analyzed in light of changing technology. Details of a single-chip floating-point unit designed in two-micron CMOS for SPUR are described, including special design considerations for very wide data paths. The pervasive effects of scaling technology on different levels of design are explored, from devices and circuits, through logic and micro-architecture, to algorithms and systems.

  6. Research of design challenges and new technologies for floating LNG

    Science.gov (United States)

    Lee, Dong-Hyun; Ha, Mun-Keun; Kim, Soo-Young; Shin, Sung-Chul

    2014-06-01

    With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO). The global Floating LNG (FLNG) market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  7. Numerical investigation of floating breakwater movement using SPH method

    Directory of Open Access Journals (Sweden)

    A. Najafi-Jilani

    2011-06-01

    Full Text Available In this work, the movement pattern of a floating breakwater is numerically analyzed using Smoothed Particle Hydrodynamic (SPH method as a Lagrangian scheme. At the seaside, the regular incident waves with varying height and period were considered as the dynamic free surface boundary conditions. The smooth and impermeable beach slope was defined as the bottom boundary condition. The effects of various boundary conditions such as incident wave characteristics, beach slope, and water depth on the movement of the floating body were studied. The numerical results are in good agreement with the available experimental data in the literature The results of the movement of the floating body were used to determine the transmitted wave height at the corresponding boundary conditions

  8. Study on Wood Drying Properties under Vacuum-floating Pressure

    Institute of Scientific and Technical Information of China (English)

    ZHANGBiguang; YISonghn; CHANGJianmin; LIXianjun

    2004-01-01

    Using Masson pine as specimens, when drying mediums are overheated steam and hot-air respectively, preheating characteristics of wood under vacuum-floating pressure drying are discussed by measurement of internal temperature field and variation of moisture content during period of preheating. The relationship between drying medium conditions and drying rate of wood reveals that, firstly, compared with process of air-drying, time needed to be preheated under vacuum-floating decreased dramatically, meanwhile,the magnitude of condensation on the surface is relatively larger. Secondly, drying rate of wood under vacuum-floating pressure increases coupled with temperature of medium, reduction of absolute pressure,and raise of fluctuation rate of pressure. The sequence of factors contribution to drying rate is listed as following: temperature of medium (t) > fluctuation rate of pressure (f)> absolute pressure (p).

  9. Floating plastic debris in the Central and Western Mediterranean Sea.

    Science.gov (United States)

    Ruiz-Orejón, Luis F; Sardá, Rafael; Ramis-Pujol, Juan

    2016-09-01

    In two sea voyages throughout the Mediterranean (2011 and 2013) that repeated the historical travels of Archduke Ludwig Salvator of Austria (1847-1915), 71 samples of floating plastic debris were obtained with a Manta trawl. Floating plastic was observed in all the sampled sites, with an average weight concentration of 579.3 g dw km(-2) (maximum value of 9298.2 g dw km(-2)) and an average particle concentration of 147,500 items km(-2) (the maximum concentration was 1,164,403 items km(-2)). The plastic size distribution showed microplastics (<5 mm) in all the samples. The most abundant particles had a surface area of approximately 1 mm(2) (the mesh size was 333 μm). The general estimate obtained was a total value of 1455 tons dw of floating plastic in the entire Mediterranean region, with various potential spatial accumulation areas.

  10. Formulation and evaluation of glipizide floating-bioadhesive tablets

    Directory of Open Access Journals (Sweden)

    Jayvadan K. Patel

    2010-10-01

    Full Text Available The purpose of this study was formulation and in vitro evaluation of floating-bioadhesive tablets to lengthen the stay of glipizide in its absorption area. Effervescent tablets were made using chitosan (CH, hydroxypropyl methylcellulose (HPMC, carbopolP934 (CP, polymethacrylic acid (PMA, citric acid, and sodium bicarbonate. Tablets with 5% effervescent base had longer lag time than 10%. The type of polymer had no significant effect on the floating lag time. All tablets floated atop the medium for 23-24 hr. Increasing carbopolP934 caused higher bioadhesion than chitosan (p < 0.05. All formulations showed a Higuchi, non-Fickian release mechanism. Tablets with 10% effervescent base, 80% CH/20% HPMC, or 80% CP/20% PMA seemed desirable.

  11. Numerical modelling of floating debris in the world's oceans.

    Science.gov (United States)

    Lebreton, L C-M; Greer, S D; Borrero, J C

    2012-03-01

    A global ocean circulation model is coupled to a Lagrangian particle tracking model to simulate 30 years of input, transport and accumulation of floating debris in the world ocean. Using both terrestrial and maritime inputs, the modelling results clearly show the formation of five accumulation zones in the subtropical latitudes of the major ocean basins. The relative size and concentration of each clearly illustrate the dominance of the accumulation zones in the northern hemisphere, while smaller seas surrounded by densely populated areas are also shown to have a high concentration of floating debris. We also determine the relative contribution of different source regions to the total amount of material in a particular accumulation zone. This study provides a framework for describing the transport, distribution and accumulation of floating marine debris and can be continuously updated and adapted to assess scenarios reflecting changes in the production and disposal of plastic worldwide. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Optimal Selection of Floating Platform for Tidal Current Power Station

    Directory of Open Access Journals (Sweden)

    Fengmei Jing

    2013-06-01

    Full Text Available With continuous development of marine engineering, more and more new structures are used in the exploring of tidal current energy. Three are there different kinds of support structures for tidal current power station, which are sea-bed mounted/gravity based system, pile mounted system and floating moored platform. Comparison with them, the floating mooring system is suit for deep water and the application of which will be widely. In this study, catamaran and semi-submersible as floating platform of tidal current power station are studied. And they are compared with its economic, efficiency of turbine and stability of station. It is found that the catamaran is optimal choice. Based on basic ship theory and using software MOSES, the stability of Catamaran tidal current power station is also calculated. The research of this study is significant and it will be as the reference for the future study.

  13. Expanded polystyrene (EPS) floats for surveillance of Ochlerotatus japonicus.

    Science.gov (United States)

    Scott, Jamesina J; Crans, Wayne J

    2003-12-01

    Blocks of expanded polystyrene (EPS) were placed in a variety of habitats to investigate their potential as an egg-collection device for container-dwelling Aedes and Ochlerotatus species. Eggs from Ochlerotatus japonicus, Oc. triseriatus, Oc. hendersoni, and Aedes albopictus were collected with EPS floats. The float provides an inexpensive, low-maintenance alternative to the Centers for Disease Control ovitrap for sampling container-dwelling mosquito species that are important vectors of disease. Eggs collected on the floats have many potential applications, including use in routine population surveillance; detection of Oc. japonicus, Ae. albopictus, and other container-dwelling species in new areas; species distribution studies; natural transovarial transmission studies; ovipositional studies; collection of local field populations for insecticide resistance assays; assessment of adulticiding efficacy; and establishment of new laboratory colonies.

  14. Research of design challenges and new technologies for floating LNG

    Directory of Open Access Journals (Sweden)

    Lee Dong-Hyun

    2014-06-01

    Full Text Available With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO. The global Floating LNG (FLNG market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  15. Floating knee injuries: Results of treatment and outcomes

    Directory of Open Access Journals (Sweden)

    Mohammad Hadi Nouraei

    2013-01-01

    Full Text Available Background: Floating knee, referred to as ipsilateral fractures of the femur and tibia, is usually associated with several complications and mortality. This study was designed to present our experience with treatment of this injury throughout; age, sex, mechanism of injury, associated injuries, method and results of treatment, and complications of floating knee are discussed. Materials and Methods: This retrospective study was performed between January 2006 and December 2011. All patients with floating knee injuries who were admitted to the referral educational hospitals were included. The information about the 238 cases of floating knee injuries were gathered through the 254,620 trauma files and after excluding 18 patients who died within 6 months, the remaining files were studied and the target information was recorded. Results: The most frequent age group was 20-29 years (44.5%. The floating knee injuries were more common in males (85.5%. Type (D according to "the classification of Letts and Vincent" was observed in 38.9% cases. The most frequent mechanism of injury was car to motorcycles accidents (48.2%. The most common associated injury was pelvic fractures (86.8%. Open reduction and internal fixation was the common type of treatment (70%. The most common early and late complications were knee hemarthrosis in 31 cases (14% and knee osteoarthritis in 30 cases (13.6%, respectively. Death during the 5 years follow up was due to circulatory disruption, followed by deep vein thrombosis (61%. There was a significant relation between the age and outcomes as it worsens with age (P-value < 0.05. Conclusion: This study revealed that the complication rate associated with floating knee injuries remained high, regardless of the used treatment regimen and surgeons should focus on reducing complications while treating it.

  16. Assessment of the nutrient removal effectiveness of floating treatment wetlands applied to urban retention ponds.

    Science.gov (United States)

    Wang, Chih-Yu; Sample, David J

    2014-05-01

    The application of floating treatment wetlands (FTWs) in point and non-point source pollution control has received much attention recently. Although the potential of this emerging technology is supported by various studies, quantifying FTW performance in urban retention ponds remains elusive due to significant research gaps. Actual urban retention pond water was utilized in this mesocosm study to evaluate phosphorus and nitrogen removal efficiency of FTWs. Multiple treatments were used to investigate the contribution of each component in the FTW system with a seven-day retention time. The four treatments included a control, floating mat, pickerelweed (Pontederia cordata L.), and softstem bulrush (Schoenoplectus tabernaemontani). The water samples collected on Day 0 (initial) and 7 were analyzed for total phosphorus (TP), total particulate phosphorus, orthophosphate, total nitrogen (TN), organic nitrogen, ammonia nitrogen, nitrate-nitrite nitrogen, and chlorophyll-a. Statistical tests were used to evaluate the differences between the four treatments. The effects of temperature on TP and TN removal rates of the FTWs were described by the modified Arrhenius equation. Our results indicated that all three FTW designs, planted and unplanted floating mats, could significantly improve phosphorus and nitrogen removal efficiency (%, E-TP and E-TN) compared to the control treatment during the growing season, i.e., May through August. The E-TP and E-TN was enhanced by 8.2% and 18.2% in the FTW treatments planted with the pickerelweed and softstem bulrush, respectively. Organic matter decomposition was likely to be the primary contributor of nutrient removal by FTWs in urban retention ponds. Such a mechanism is fostered by microbes within the attached biofilms on the floating mats and plant root surfaces. Among the results of the four treatments, the FTWs planted with pickerelweed had the highest E-TP, and behaved similarly with the other two FTW treatments for nitrogen removal

  17. Drops with non-circular footprints

    CERN Document Server

    Ravazzoli, Pablo D; Diez, Javier A

    2015-01-01

    In this paper we study the morphology of drops formed on partially wetting substrates, whose footprint is not circular. This type of drops is a consequence of the breakup processes occurring in thin films when anisotropic contact line motions take place. The anisotropy is basically due to hysteresis effects of the contact angle since some parts of the contact line are wetting, while others are dewetting. Here, we obtain a peculiar drop shape from the rupture of a long liquid filament sitting on a solid substrate, and analyze its shape and contact angles by means of goniometric and refractive techniques. We also find a non--trivial steady state solution for the drop shape within the long wave approximation (lubrication theory), and compare most of its features with experimental data. This solution is presented both in Cartesian and polar coordinates, whose constants must be determined by a certain group of measured parameters. Besides, we obtain the dynamics of the drop generation from numerical simulations of...

  18. Drop splash on a smooth, dry surface

    Science.gov (United States)

    Riboux, Guillaume; Gordillo, Jose Manuel; Korobkin, Alexander

    2013-11-01

    It is our purpose here to determine the conditions under which a drop of a given liquid with a known radius R impacting against a smooth impermeable surface at a velocity V, will either spread axisymmetrically onto the substrate or will create a splash, giving rise to usually undesired star-shaped patterns. In our experimental setup, drops are generated injecting low viscosity liquids falling under the action of gravity from a stainless steel hypodermic needle. The experimental observations using two high speed cameras operating simultaneously and placed perpendicularly to each other reveal that, initially, the drop deforms axisymmetrically, with A (T) the radius of the wetted area. For high enough values of the drop impact velocity, a thin sheet of liquid starts to be ejected from A (T) at a velocity Vjet > V for instants of time such that T >=Tc . If Vjet is above a certain threshold, which depends on the solid wetting properties as well as on the material properties of both the liquid and the atmospheric gas, the rim of the lamella dewets the solid to finally break into drops. Using Wagner's theory we demonstrate that A (T) =√{ 3 RVT } and our results also reveal that Tc We - 1 / 2 =(ρV2 R / σ) - 1 / 2 and Vjet We 1 / 4 .

  19. Drop impact entrapment of bubble rings

    KAUST Repository

    Thoraval, M.-J.

    2013-04-29

    We use ultra-high-speed video imaging to look at the initial contact of a drop impacting on a liquid layer. We observe experimentally the vortex street and the bubble-ring entrapments predicted numerically, for high impact velocities, by Thoraval et al. (Phys. Rev. Lett., vol. 108, 2012, article 264506). These dynamics mainly occur within 50 -s after the first contact, requiring imaging at 1 million f.p.s. For a water drop impacting on a thin layer of water, the entrapment of isolated bubbles starts through azimuthal instability, which forms at low impact velocities, in the neck connecting the drop and pool. For Reynolds number Re above -12 000, up to 10 partial bubble rings have been observed at the base of the ejecta, starting when the contact is -20% of the drop size. More regular bubble rings are observed for a pool of ethanol or methanol. The video imaging shows rotation around some of these air cylinders, which can temporarily delay their breakup into micro-bubbles. The different refractive index in the pool liquid reveals the destabilization of the vortices and the formation of streamwise vortices and intricate vortex tangles. Fine-scale axisymmetry is thereby destroyed. We show also that the shape of the drop has a strong influence on these dynamics. 2013 Cambridge University Press.

  20. Drops with non-circular footprints

    Science.gov (United States)

    Ravazzoli, Pablo D.; González, Alejandro G.; Diez, Javier A.

    2016-04-01

    In this paper we study the morphology of drops formed on partially wetting substrates, whose footprint is not circular. These drops are consequence of the breakup processes occurring in thin films when anisotropic contact line motions take place. The anisotropy is basically due to the hysteresis of the contact angle since there is a wetting process in some parts of the contact line, while a dewetting occurs in other parts. Here, we obtain a characteristic drop shape from the rupture of a long liquid filament sitting on a solid substrate. We analyze its shape and contact angles by means of goniometric and refractive techniques. We also find a non-trivial steady state solution for the drop shape within the long wave approximation (lubrication theory), and we compare most of its features with experimental data. This solution is presented both in Cartesian and polar coordinates, whose constants must be determined by a certain group of measured parameters. Besides, we obtain the dynamics of the drop generation from numerical simulations of the full Navier-Stokes equation, where we emulate the hysteretic effects with an appropriate spatial distribution of the static contact angle over the substrate.

  1. Drop Testing Representative Multi-Canister Overpacks

    Energy Technology Data Exchange (ETDEWEB)

    Snow, Spencer D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Morton, Dana K. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The objective of the work reported herein was to determine the ability of the Multi- Canister Overpack (MCO) canister design to maintain its containment boundary after an accidental drop event. Two test MCO canisters were assembled at Hanford, prepared for testing at the Idaho National Engineering and Environmental Laboratory (INEEL), drop tested at Sandia National Laboratories, and evaluated back at the INEEL. In addition to the actual testing efforts, finite element plastic analysis techniques were used to make both pre-test and post-test predictions of the test MCOs structural deformations. The completed effort has demonstrated that the canister design is capable of maintaining a 50 psig pressure boundary after drop testing. Based on helium leak testing methods, one test MCO was determined to have a leakage rate not greater than 1x10-5 std cc/sec (prior internal helium presence prevented a more rigorous test) and the remaining test MCO had a measured leakage rate less than 1x10-7 std cc/sec (i.e., a leaktight containment) after the drop test. The effort has also demonstrated the capability of finite element methods using plastic analysis techniques to accurately predict the structural deformations of canisters subjected to an accidental drop event.

  2. Bubble and Drop Nonlinear Dynamics (BDND)

    Science.gov (United States)

    Trinh, E. H.; Leal, L. Gary; Thomas, D. A.; Crouch, R. K.

    1998-01-01

    Free drops and bubbles are weakly nonlinear mechanical systems that are relatively simple to characterize experimentally in 1-G as well as in microgravity. The understanding of the details of their motion contributes to the fundamental study of nonlinear phenomena and to the measurement of the thermophysical properties of freely levitated melts. The goal of this Glovebox-based experimental investigation is the low-gravity assessment of the capabilities of a modular apparatus based on ultrasonic resonators and on the pseudo- extinction optical method. The required experimental task is the accurate measurements of the large-amplitude dynamics of free drops and bubbles in the absence of large biasing influences such as gravity and levitation fields. A single-axis levitator used for the positioning of drops in air, and an ultrasonic water-filled resonator for the trapping of air bubbles have been evaluated in low-gravity and in 1-G. The basic feasibility of drop positioning and shape oscillations measurements has been verified by using a laptop-interfaced automated data acquisition and the optical extinction technique. The major purpose of the investigation was to identify the salient technical issues associated with the development of a full-scale Microgravity experiment on single drop and bubble dynamics.

  3. Efficient Hybrid Method for Binary Floating Point Multiplication

    Directory of Open Access Journals (Sweden)

    S. Praveenkumar Reddy,

    2014-04-01

    Full Text Available This paper presents a high speed binary floating point multiplier based on Hybrid Method. To improve speed multiplication of mantissa is done using Hybrid method replacing existing multipliers like Carry Save Multiplier, Dadda Multiplier and Modified Booth Multiplier. Hybrid method is a combination of Dadda Multiplier and Modified Radix-8 Booth Multiplier. The design achieves high speed with maximum frequency of 555 MHz compared to existing floating point multipliers. The multiplier implemented in Verilog HDL and analyzed in Quartus II 10.0 version. Hybrid Multiplier is compared with existing multipliers.

  4. Transition to Chaos in the Floating Half Zone Convection

    Institute of Scientific and Technical Information of China (English)

    AA Yan; CAO Zhong-Hua; HU Wen-Rui

    2007-01-01

    The transition process from steady convection to chaos is experimentally studied in thermocapillary convections of floating half zone. The onset of temperature oscillations in the liquid bridge of floating half zone and further transitions of the temporal convective behaviour are detected by measuring the temperature in the liquid bridge.The fast Fourier transform reveals the frequency and amplitude characteristics of the flow transition. The experimental results indicate the existence of a sequence of period-doubling bifurcations that culminate in chaos.The measured Feigenbaum numbers are δ2 = 4.69 and δ4 = 4.6, which are comparable with the theoretical asymptotic value δ = 4.669.

  5. Analysis of Responses of Floating Dual Pontoon Structure

    Institute of Scientific and Technical Information of China (English)

    WENG Wen-Kai; CHOU Chung-Ren

    2007-01-01

    A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure.The structure under consideration consisting of two pontoons,is connected by a rigid framework,and linked to the sea floor by a mooring system.The theoretical conception is based on potential theory with linear external forces,and applied to an arbitrarily shaped body and water depth.The discussion includes the influence of draft and space between pontoons on the responses of the floating structure.Finally,the validity of the method is adequately verified by experimental results.

  6. Collective Molecular Dynamics of a Floating Water Bridge

    CERN Document Server

    Del Giudice, Emilio; Vitiello, Giuseppe

    2010-01-01

    When a high voltage is applied to pure water filling two beakers kept close to each other, a connection forms spontaneously, giving the impression of a floating water bridge. This phenomenon is of special interest, since it comprises a number of phenomena currently tackled in modern water science. The formation and the main properties of this floating water bridge are analyzed in the conceptual framework of quantum electrodynamics. The necessary conditions for the formation are investigated as well as the time evolution of the dynamics. The predictions are found in agreement with the observations.

  7. Towards a Completion of Archimedes' Treatise on Floating Bodies

    CERN Document Server

    Girstmair, Kurt

    2007-01-01

    In his treatise on floating bodies Archimedes determines the equilibrium positions of a floating paraboloid segment, but only in the case when the basis of the segment is either completely outside of the fluid or completely submerged. Here we give a mathematical model for the remaining case, i.e., two simple conditions which describe the equilibria in closed form. We provide tools for finding all equilibria in a reliable way and for the classification of these equilibria. This paper can be considered as a continuation of a recent article of Rorres.

  8. Bifurcated method and apparatus for floating point addition with decreased latency time

    Energy Technology Data Exchange (ETDEWEB)

    Farmwald, Paul M. (Livermore, CA)

    1987-01-01

    Apparatus for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  9. 14 CFR 23.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... midway between the keel and chine lines. (c) Unsymmetrical landing; twin float seaplanes. The..., perpendicularly to the plane of symmetry midway between the keel and chine lines of the float, at the...

  10. 14 CFR 25.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... chine lines. (c) Unsymmetrical landing; twin float seaplanes. The unsymmetrical loading consists of an... symmetry midway between the keel and chine lines of the float, at the same longitudinal station as...

  11. Analysis of Phthalate Esters in Lotion by Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplets Combined with Gas Chromatography%漂浮固化分散液液微萃取/气相色谱法测定化妆水中4种增塑剂

    Institute of Scientific and Technical Information of China (English)

    毕欢; 郑鑫; 伦小文; 马晓薇; 侯晓虹

    2013-01-01

    建立了漂浮固化分散液液微萃取(DLLME-SFO)-气相色谱法(GC)同时测定化妆水中4种邻苯二甲酸酯类增塑剂 (PAEs)的分析方法,并对萃取剂体积、分散剂种类、分散剂体积、萃取时间、水相pH值、盐浓度等参数进行优化.向样品溶液(化妆水和水的体积比为1∶10,pH 3.0)中快速加入15μL1-十二醇(萃取剂)和1 300 μL乙醇(分散剂),涡旋1 min,4 000 r·min-1离心5 min后,于冰浴中浸泡,待1-十二醇凝固后转移,融化后进行气相色谱分析.结果表明,该方法对4种目标化合物的线性范围为5.0~500.0 μg·L-1,检出限为0.001~1.0 μg ·L-1,回收率为88%~108%,相对标准偏差为1.6%~3.3%.4种目标化合物的富集倍数为800 ~1 578倍.将该方法与其它测定邻苯二甲酸酯类增塑剂的前处理方法进行对比.该方法操作简单快速、灵敏度高,可满足化妆水中邻苯二甲酸酯类增塑剂的分析要求.%A novel dispersive liquid-liquid microextraction based on solidification of floating organic droplets(DLLME-SFO) combined with gas chromatography(GC) was developed,and validated in the pretreatment and determination of four phthalate esters (PAEs),including dibutyl phthalate,benzyl butyl phthalate,2-ethylhexyl phthalate,and di-n-octyl phthalate in lotion.The experimental conditions affecting extraction efficiencies for the analytes,such as extraction solvent volume,kind of dispersive solvent,dispersive solvent volume,extraction time,pH value and salt concentration were investigated.In the optimal DLLME-SFO method,the sample solution adjusted to pH 3.0 was prepared as a mixed solution of lotion-pure water (1 ∶ 10).15 μL 1-dodecanol (extraction solvent)and 1 300 μL ethanol(dispersive solvent) were rapidly injected into the sample solution.After vortexed for 1 min and centrifugated at 4 000 r · min-1 for 5 min,the sample was cooled down in an ice bath till 1-dodecanol became solid and formed a small ball.Then the

  12. Liquid Drop Measuring Device for Analyzing Liquid Properties

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Based on the correlation between certain properties of liquid and the properties of the corresponding liquid drop formed under given conditions, a liquid drop measuring device is utilized to monitor the drop formation process of the liquid sample with photoelectric measuring methods. The mechanical and optical characteristic of the liquid is explored with the optical fibers from the internal of the liquid drop during its formation. The drop head capacitor is utilized to monitor the growth process of the liquid drop to gain the drop volume information related to the physical property of liquid. The unique liquid drop trace containing the integrated properties of liquid is generated, and it is proved by experiment that for different liquids their liquid drop traces are different. The analysis on liquid properties and discrimination between different liquids can be proceeded with the liquid drop trace obtained by the liquid drop measuring device.

  13. Settling of copper drops in molten slags

    Science.gov (United States)

    Warczok, A.; Utigard, T. A.

    1995-02-01

    The settling of suspended metal and sulfide droplets in liquid metallurgical, slags can be affected by electric fields. The migration of droplets due to electrocapillary motion phenomena may be used to enhance the recovery of suspended matte/metal droplets and thereby to increase the recovery of pay metals. An experimental technique was developed for the purpose of measuring the effect of electric fields on the settling rate of metallic drops in liquid slags. Copper drops suspended in CaO-SiO2-Al2O3-Cu2O slags were found to migrate toward the cathode. Electric fields can increase the settling rate of 5-mm-diameter copper drops 3 times or decrease the settling until levitation by reversal of the electric field. The enhanced settling due to electric fields decreases with increasing Cu2O contents in the slag.

  14. The surface temperature of free evaporating drops

    Science.gov (United States)

    Borodulin, V. Y.; Letushko, V. N.; Nizovtsev, M. I.; Sterlyagov, A. N.

    2016-10-01

    Complex experimental and theoretical investigation of heat and mass transfer processes was performed at evaporation of free liquid drops. For theoretical calculation the emission-diffusion model was proposed. This allowed taking into account the characteristics of evaporation of small droplets, for which heat and mass transfer processes are not described in the conventional diffusion model. The calculation results of evaporation of droplets of different sizes were compared using two models: the conventional diffusion and emission-diffusion models. To verify the proposed physical model, the evaporation of droplets suspended on a polypropylene fiber was experimentally investigated. The form of droplets in the evaporation process was determined using microphotographing. The temperature was measured on the surfaces of evaporating drops using infrared thermography. The experimental results have showed good agreement with the numerical data for the time of evaporation and the temperature of evaporating drops.

  15. Drop impact on a flexible fiber

    CERN Document Server

    Dressaire, Emilie; Boulogne, François; Stone, Howard A

    2015-01-01

    When droplets impact fibrous media, the liquid can be captured by the fibers or contact then break away. Previous studies have shown that the efficiency of drop capture by a rigid fiber depends on the impact velocity and defined a threshold velocity below which the drop is captured. However, it is necessary to consider the coupling of elastic and capillary effects to achieve a greater understanding of the capture process for soft substrates. Here, we study experimentally the dynamics of a single drop impacting on a thin flexible fiber. Our results demonstrate that the threshold capture velocity depends on the flexibility of fibers in a non-monotonic way. We conclude that tuning the mechanical properties of fibers can optimize the efficiency of droplet capture.

  16. Secondary breakup of coal water slurry drops

    Science.gov (United States)

    Zhao, Hui; Liu, Hai-Feng; Xu, Jian-Liang; Li, Wei-Feng

    2011-11-01

    To investigate secondary atomization of coal water slurry (CWS), deformation and breakup of eight kinds of CWS drops are presented using high speed digital camera. Based on morphology, deformation and breakup regimes of CWS drops can be termed some different modes: deformation, multimode breakup (including two sub-modes: hole breakup and tensile breakup), and shear breakup. Correlations on the ranges of breakup modes are also obtained. The conventional Weber number and Ohnesorge number are found to be insufficient to classify all breakup modes of CWS drops, so two other non-dimensional numbers based on rheology of CWS are suggested to use in the deformation and breakup regime map. Finally, total breakup time is studied and correlated, which increases with Ohnesorge number.

  17. FPGA Implementation of Double Precision Floating Point Multiplier using Xilinx Coregen Tool

    OpenAIRE

    Sukhvir Kaur; Parminder Singh Jassal

    2013-01-01

    Floating point arithmetic is widely used in many areas, especially scientific computation and signal processing. The main applications of floating points today are in the field of medical imaging, biometrics, motion capture and audio applications. The IEEE floating point standard defines both single precision and double precision formats. Multiplication is a core operation in many signal processing computations, and as such efficient implementation of floating point multipliers is an importan...

  18. Bio-Optical sensors on Argo Floats. Reports of the international ocean-colour coordinating group

    CSIR Research Space (South Africa)

    Bernard, S

    2011-01-01

    Full Text Available . . . . . . . . . . . . . . . . . . . . . 64 7.2.2 Data status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 7.3 Matching Float and OCR Satellite Measurements . . . . . . . . . . . . . . 68 8 Towards the Implementation of Float Arrays 71 8.1 VAL-floats: Preparatory....3 Satellite correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 References 83 iv • Bio-Optical Sensors on Argo Floats Executive Summary In the past two decades, thanks to the advent of satellite ocean-colour radiometry (OCR), biogeochemical...

  19. Effects of vegetation, season and temperature on removal pollutants in experimental floating treatment wetlands

    OpenAIRE

    Van de Moortel, Annelies; Meers, Erik; Niels DE PAUW; Tack, Filip

    2010-01-01

    The research and interest towards the use of constructed floating wetlands for (waste)water treatment is emerging as more treatment opportunities are marked out, and the technique is applied more often. To evaluate the effect of a floating macrophyte mat and the influence of temperature and season on physico-chemical changes and removal, two constructed floating wetlands (CFWs), including a floating macrophyte mat, and a control, without emergent vegetation, were built. Raw domestic wastewate...

  20. Spatial distributions of floating seaweeds in the East China Sea from late winter to early spring

    OpenAIRE

    Mizuno, S.; Ajisaka, T.; Lahbib, S.; Kokubu, Y.; Alabsi, M. N.; Komatsu, T

    2013-01-01

    Floating seaweeds play an important role as a habitat for many animals accompanying or attaching to them in offshore waters. It was in 2000 that the first report described abundant distributions of floating seaweeds in offshore waters in the East China Sea in spring. Young individuals of the yellowtail Seriola quinqueradiata are captured for aquaculture purposes from floating seaweeds in the East China Sea. Therefore, a sound understanding of the distributions of floating seaweeds in the East...