WorldWideScience

Sample records for flexible job shop

  1. Flexible job shop scheduling problem in manufacturing

    Curralo, Ana; Pereira, Ana I.; Barbosa, José; Leitão, Paulo

    2013-01-01

    This paper addresses a real assembly cell: the AIP-PRIMECA cell at the Université de Valenciennes et du Hainaut-Cambrésis, in France. This system can be viewed as a Flexible Job Shop, leading to the formulation of a Flexible Job Shop Scheduling Problem (FJSSP).

  2. Overlap Algorithms in Flexible Job-shop Scheduling

    Celia Gutierrez

    2014-06-01

    Full Text Available The flexible Job-shop Scheduling Problem (fJSP considers the execution of jobs by a set of candidate resources while satisfying time and technological constraints. This work, that follows the hierarchical architecture, is based on an algorithm where each objective (resource allocation, start-time assignment is solved by a genetic algorithm (GA that optimizes a particular fitness function, and enhances the results by the execution of a set of heuristics that evaluate and repair each scheduling constraint on each operation. The aim of this work is to analyze the impact of some algorithmic features of the overlap constraint heuristics, in order to achieve the objectives at a highest degree. To demonstrate the efficiency of this approach, experimentation has been performed and compared with similar cases, tuning the GA parameters correctly.

  3. Worker flexibility in a parallel dual resource constrained job shop

    Yue, H.; Slomp, J.; Molleman, E.; van der Zee, D.J.

    2008-01-01

    In this paper we investigate cross-training policies in a dual resource constraint (DRC) parallel job shop where new part types are frequently introduced into the system. Each new part type introduction induces the need for workers to go through a learning curve. A cross-training policy relates to

  4. Recent Research Trends in Genetic Algorithm Based Flexible Job Shop Scheduling Problems

    Amjad, Muhammad Kamal; Butt, Shahid Ikramullah; Kousar, Rubeena; Ahmad, Riaz; Agha, Mujtaba Hassan; Faping, Zhang; Anjum, Naveed; Asgher, Umer

    2018-01-01

    Flexible Job Shop Scheduling Problem (FJSSP) is an extension of the classical Job Shop Scheduling Problem (JSSP). The FJSSP is known to be NP-hard problem with regard to optimization and it is very difficult to find reasonably accurate solutions of the problem instances in a rational time. Extensive research has been carried out in this area especially over the span of the last 20 years in which the hybrid approaches involving Genetic Algorithm (GA) have gained the most popularity. Keeping in...

  5. Multiagent scheduling method with earliness and tardiness objectives in flexible job shops.

    Wu, Zuobao; Weng, Michael X

    2005-04-01

    Flexible job-shop scheduling problems are an important extension of the classical job-shop scheduling problems and present additional complexity. Such problems are mainly due to the existence of a considerable amount of overlapping capacities with modern machines. Classical scheduling methods are generally incapable of addressing such capacity overlapping. We propose a multiagent scheduling method with job earliness and tardiness objectives in a flexible job-shop environment. The earliness and tardiness objectives are consistent with the just-in-time production philosophy which has attracted significant attention in both industry and academic community. A new job-routing and sequencing mechanism is proposed. In this mechanism, two kinds of jobs are defined to distinguish jobs with one operation left from jobs with more than one operation left. Different criteria are proposed to route these two kinds of jobs. Job sequencing enables to hold a job that may be completed too early. Two heuristic algorithms for job sequencing are developed to deal with these two kinds of jobs. The computational experiments show that the proposed multiagent scheduling method significantly outperforms the existing scheduling methods in the literature. In addition, the proposed method is quite fast. In fact, the simulation time to find a complete schedule with over 2000 jobs on ten machines is less than 1.5 min.

  6. Un algoritmo genético para el problema de Job Shop Flexible A genetic algorithm for the Flexible Job Shop problem

    Rosa Medina Durán

    2011-06-01

    Full Text Available En este estudio se propone e implementa computacionalmente un algoritmo genético secuencial para resolver el problema del Job Shop Flexible (existente en la Gestión de Operaciones, el cual es parte de la familia de los problemas de programación de tareas o trabajos (Scheduling en un taller que funciona a pedido. Surge como una generalización del problema del Job Shop y permite optimizar el uso de los recursos (máquinas con mayor flexibilidad, ya que cada máquina puede realizar más de una operación. Este problema ha sido estudiado por numerosos autores, los que han propuesto diversos modelos matemáticos y enfoques heurísticos. Debido a la naturaleza combinatoria, los métodos exactos que resuelven modelos matemáticos encuentran soluciones sólo para instancias pequeñas o simples del problema mencionado. Los resultados muestran la efectividad del algoritmo propuesto para entregar buenas soluciones en tiempos computacionales razonables en más de 130 instancias encontradas en la literatura.This study proposes and computationally implements a sequential genetic algorithm to solve the Flexible Job Shop problem (found in Operations Management, which is part of the family of job or task scheduling problems in a shop that works on demand. It is a generalization of the Job Shop problem, and allows optimizing the use of resources (machines in the shop, with greater flexibility, since each machine can perform more than one operation. This problem has been studied by many authors, who have proposed various mathematical models and heuristic approaches. Due to the combinatorial nature of the problem, the exact methods that solve the mathematical models are often solutions for small and simple instances of the problem. The results show the effectiveness of the proposed algorithm to provide good solutions in reasonable computational times in over 130 instances found in the literatura.

  7. A fine-grained parallel algorithm for the cyclic flexible job shop problem

    Bożejko Wojciech

    2017-06-01

    Full Text Available In this paper there is considered a flexible job shop problem of operations scheduling. The new, very fast method of determination of cycle time is presented. In the design of heuristic algorithm there was the neighborhood inspired by the game of golf applied. Lower bound of the criterion function was used in the search of the neighborhood.

  8. A new genetic algorithm for flexible job-shop scheduling problems

    Driss, Imen; Mouss, Kinza Nadia; Laggoun, Assia

    2015-01-01

    Flexible job-shop scheduling problem (FJSP), which is proved to be NP-hard, is an extension of the classical job-shop scheduling problem. In this paper, we propose a new genetic algorithm (NGA) to solve FJSP to minimize makespan. This new algorithm uses a new chromosome representation and adopts different strategies for crossover and mutation. The proposed algorithm is validated on a series of benchmark data sets and tested on data from a drug manufacturing company. Experimental results prove that the NGA is more efficient and competitive than some other existing algorithms.

  9. A new genetic algorithm for flexible job-shop scheduling problems

    Driss, Imen; Mouss, Kinza Nadia; Laggoun, Assia [University of Batna, Batna (Algeria)

    2015-03-15

    Flexible job-shop scheduling problem (FJSP), which is proved to be NP-hard, is an extension of the classical job-shop scheduling problem. In this paper, we propose a new genetic algorithm (NGA) to solve FJSP to minimize makespan. This new algorithm uses a new chromosome representation and adopts different strategies for crossover and mutation. The proposed algorithm is validated on a series of benchmark data sets and tested on data from a drug manufacturing company. Experimental results prove that the NGA is more efficient and competitive than some other existing algorithms.

  10. Solving Flexible Job-Shop Scheduling Problem Using Gravitational Search Algorithm and Colored Petri Net

    Behnam Barzegar

    2012-01-01

    Full Text Available Scheduled production system leads to avoiding stock accumulations, losses reduction, decreasing or even eliminating idol machines, and effort to better benefitting from machines for on time responding customer orders and supplying requested materials in suitable time. In flexible job-shop scheduling production systems, we could reduce time and costs by transferring and delivering operations on existing machines, that is, among NP-hard problems. The scheduling objective minimizes the maximal completion time of all the operations, which is denoted by Makespan. Different methods and algorithms have been presented for solving this problem. Having a reasonable scheduled production system has significant influence on improving effectiveness and attaining to organization goals. In this paper, new algorithm were proposed for flexible job-shop scheduling problem systems (FJSSP-GSPN that is based on gravitational search algorithm (GSA. In the proposed method, the flexible job-shop scheduling problem systems was modeled by color Petri net and CPN tool and then a scheduled job was programmed by GSA algorithm. The experimental results showed that the proposed method has reasonable performance in comparison with other algorithms.

  11. A hybrid algorithm for flexible job-shop scheduling problem with setup times

    Ameni Azzouz

    2017-01-01

    Full Text Available Job-shop scheduling problem is one of the most important fields in manufacturing optimization where a set of n jobs must be processed on a set of m specified machines. Each job consists of a specific set of operations, which have to be processed according to a given order. The Flexible Job Shop problem (FJSP is a generalization of the above-mentioned problem, where each operation can be processed by a set of resources and has a processing time depending on the resource used. The FJSP problems cover two difficulties, namely, machine assignment problem and operation sequencing problem. This paper addresses the flexible job-shop scheduling problem with sequence-dependent setup times to minimize two kinds of objectives function: makespan and bi-criteria objective function. For that, we propose a hybrid algorithm based on genetic algorithm (GA and variable neighbourhood search (VNS to solve this problem. To evaluate the performance of our algorithm, we compare our results with other methods existing in literature. All the results show the superiority of our algorithm against the available ones in terms of solution quality.

  12. Traitement d'un problème de type FJSP (Flexible Job Shop ...

    Dans cet article, nous avons étudié le problème d'optimisation d'une cellule de production flexible de type FJSP (flexible job-shop scheduling problem), dont le contrôle est très complexe. Parmi les multiples techniques et méthodes utilisées pour l‟étude de ce type de problème, il y a celles qui relèvent de la recherche ...

  13. Recent Research Trends in Genetic Algorithm Based Flexible Job Shop Scheduling Problems

    Muhammad Kamal Amjad

    2018-01-01

    Full Text Available Flexible Job Shop Scheduling Problem (FJSSP is an extension of the classical Job Shop Scheduling Problem (JSSP. The FJSSP is known to be NP-hard problem with regard to optimization and it is very difficult to find reasonably accurate solutions of the problem instances in a rational time. Extensive research has been carried out in this area especially over the span of the last 20 years in which the hybrid approaches involving Genetic Algorithm (GA have gained the most popularity. Keeping in view this aspect, this article presents a comprehensive literature review of the FJSSPs solved using the GA. The survey is further extended by the inclusion of the hybrid GA (hGA techniques used in the solution of the problem. This review will give readers an insight into use of certain parameters in their future research along with future research directions.

  14. A Pareto archive floating search procedure for solving multi-objective flexible job shop scheduling problem

    J. S. Sadaghiani

    2014-04-01

    Full Text Available Flexible job shop scheduling problem is a key factor of using efficiently in production systems. This paper attempts to simultaneously optimize three objectives including minimization of the make span, total workload and maximum workload of jobs. Since the multi objective flexible job shop scheduling problem is strongly NP-Hard, an integrated heuristic approach has been used to solve it. The proposed approach was based on a floating search procedure that has used some heuristic algorithms. Within floating search procedure utilize local heuristic algorithms; it makes the considered problem into two sections including assigning and sequencing sub problem. First of all search is done upon assignment space achieving an acceptable solution and then search would continue on sequencing space based on a heuristic algorithm. This paper has used a multi-objective approach for producing Pareto solution. Thus proposed approach was adapted on NSGA II algorithm and evaluated Pareto-archives. The elements and parameters of the proposed algorithms were adjusted upon preliminary experiments. Finally, computational results were used to analyze efficiency of the proposed algorithm and this results showed that the proposed algorithm capable to produce efficient solutions.

  15. Practical job shop scheduling

    Schutten, Johannes M.J.

    1998-01-01

    The Shifting Bottleneck procedure is an intuitive and reasonably good approximation algorithm for the notoriously difficult classical job shop scheduling problem. The principle of decomposing a classical job shop problem into a series of single-machine problems can also easily be applied to job shop

  16. Solving the flexible job shop problem by hybrid metaheuristics-based multiagent model

    Nouri, Houssem Eddine; Belkahla Driss, Olfa; Ghédira, Khaled

    2018-03-01

    The flexible job shop scheduling problem (FJSP) is a generalization of the classical job shop scheduling problem that allows to process operations on one machine out of a set of alternative machines. The FJSP is an NP-hard problem consisting of two sub-problems, which are the assignment and the scheduling problems. In this paper, we propose how to solve the FJSP by hybrid metaheuristics-based clustered holonic multiagent model. First, a neighborhood-based genetic algorithm (NGA) is applied by a scheduler agent for a global exploration of the search space. Second, a local search technique is used by a set of cluster agents to guide the research in promising regions of the search space and to improve the quality of the NGA final population. The efficiency of our approach is explained by the flexible selection of the promising parts of the search space by the clustering operator after the genetic algorithm process, and by applying the intensification technique of the tabu search allowing to restart the search from a set of elite solutions to attain new dominant scheduling solutions. Computational results are presented using four sets of well-known benchmark literature instances. New upper bounds are found, showing the effectiveness of the presented approach.

  17. Multiobjective Joint Optimization of Production Scheduling and Maintenance Planning in the Flexible Job-Shop Problem

    Jianfei Ye

    2015-01-01

    Full Text Available In order to solve the joint optimization of production scheduling and maintenance planning problem in the flexible job-shop, a multiobjective joint optimization model considering the maximum completion time and maintenance costs per unit time is established based on the concept of flexible job-shop and preventive maintenance. A weighted sum method is adopted to eliminate the index dimension. In addition, a double-coded genetic algorithm is designed according to the problem characteristics. The best result under the circumstances of joint decision-making is obtained through multiple simulation experiments, which proves the validity of the algorithm. We can prove the superiority of joint optimization model by comparing the result of joint decision-making project with the result of independent decision-making project under fixed preventive maintenance period. This study will enrich and expand the theoretical framework and analytical methods of this problem; it provides a scientific decision analysis method for enterprise to make production plan and maintenance plan.

  18. Moving from job-shop to production cells without losing flexibility: a case study from the wooden frames industry

    Dinis-Carvalho, J.

    2014-11-01

    Full Text Available Cellular production is usually seen as a hybrid approach between job-shop and flow-line paradigms, reducing the major disadvantages of these two paradigms: the low productivity of job-shops and the low flexibility (in terms of products’ variety of the flow-lines. This paper describes the implementation of a production cell in a production unit of wood- framed pictures and mirrors, which was originally configured as a traditional job-shop, without losing the necessary flexibility to face market demand and simultaneously increasing the production unit’s performance. By implementing a highly flexible cell, very significant improvements were expected for the system’s overall performance and the quality of the products. These expectations were met, and the implementation was successful, as demonstrated by the results presented.

  19. Flexible job-shop scheduling based on genetic algorithm and simulation validation

    Zhou Erming

    2017-01-01

    Full Text Available This paper selects flexible job-shop scheduling problem as the research object, and Constructs mathematical model aimed at minimizing the maximum makespan. Taking the transmission reverse gear production line of a transmission corporation as an example, genetic algorithm is applied for flexible jobshop scheduling problem to get the specific optimal scheduling results with MATLAB. DELMIA/QUEST based on 3D discrete event simulation is applied to construct the physical model of the production workshop. On the basis of the optimal scheduling results, the logical link of the physical model for the production workshop is established, besides, importing the appropriate process parameters to make virtual simulation on the production workshop. Finally, through analyzing the simulated results, it shows that the scheduling results are effective and reasonable.

  20. A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling

    Qianwang Deng

    2017-01-01

    Full Text Available Flexible job-shop scheduling problem (FJSP is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II for multiobjective FJSP (MO-FJSP with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N, in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed.

  1. A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling.

    Deng, Qianwang; Gong, Guiliang; Gong, Xuran; Zhang, Like; Liu, Wei; Ren, Qinghua

    2017-01-01

    Flexible job-shop scheduling problem (FJSP) is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP) characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II) for multiobjective FJSP (MO-FJSP) with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N , in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed.

  2. Flexible Job Shop Scheduling Problem Using an Improved Ant Colony Optimization

    Lei Wang

    2017-01-01

    Full Text Available As an extension of the classical job shop scheduling problem, the flexible job shop scheduling problem (FJSP plays an important role in real production systems. In FJSP, an operation is allowed to be processed on more than one alternative machine. It has been proven to be a strongly NP-hard problem. Ant colony optimization (ACO has been proven to be an efficient approach for dealing with FJSP. However, the basic ACO has two main disadvantages including low computational efficiency and local optimum. In order to overcome these two disadvantages, an improved ant colony optimization (IACO is proposed to optimize the makespan for FJSP. The following aspects are done on our improved ant colony optimization algorithm: select machine rule problems, initialize uniform distributed mechanism for ants, change pheromone’s guiding mechanism, select node method, and update pheromone’s mechanism. An actual production instance and two sets of well-known benchmark instances are tested and comparisons with some other approaches verify the effectiveness of the proposed IACO. The results reveal that our proposed IACO can provide better solution in a reasonable computational time.

  3. Study on multi-objective flexible job-shop scheduling problem considering energy consumption

    Zengqiang Jiang

    2014-06-01

    Full Text Available Purpose: Build a multi-objective Flexible Job-shop Scheduling Problem(FJSP optimization model, in which the makespan, processing cost, energy consumption and cost-weighted processing quality are considered, then Design a Modified Non-dominated Sorting Genetic Algorithm (NSGA-II based on blood variation for above scheduling model.Design/methodology/approach: A multi-objective optimization theory based on Pareto optimal method is used in carrying out the optimization model. NSGA-II is used to solve the model.Findings: By analyzing the research status and insufficiency of multi-objective FJSP, Find that the difference in scheduling will also have an effect on energy consumption in machining process and environmental emissions. Therefore, job-shop scheduling requires not only guaranteeing the processing quality, time and cost, but also optimizing operation plan of machines and minimizing energy consumption.Originality/value: A multi-objective FJSP optimization model is put forward, in which the makespan, processing cost, energy consumption and cost-weighted processing quality are considered. According to above model, Blood-Variation-based NSGA-II (BVNSGA-II is designed. In which, the chromosome mutation rate is determined after calculating the blood relationship between two cross chromosomes, crossover and mutation strategy of NSGA-II is optimized and the prematurity of population is overcome. Finally, the performance of the proposed model and algorithm is evaluated through a case study, and the results proved the efficiency and feasibility of the proposed model and algorithm.

  4. Hybrid job shop scheduling

    Schutten, Johannes M.J.

    1995-01-01

    We consider the problem of scheduling jobs in a hybrid job shop. We use the term 'hybrid' to indicate that we consider a lot of extensions of the classic job shop, such as transportation times, multiple resources, and setup times. The Shifting Bottleneck procedure can be generalized to deal with

  5. A novel integrated condition-based maintenance and stochastic flexible job shop scheduling problem

    Rahmati, Seyed Habib A.; Ahmadi, Abbas; Govindan, Kannan

    2018-01-01

    the level of the system optimization. By means of this equipment, managers can benefit from a condition-based maintenance (CBM) for monitoring and managing their system. The chief aim of the paper is to develop a stochastic maintenance problem based on CBM activities engaged with a complex applied......Integrated consideration of production planning and maintenance processes is a real world assumption. Specifically, by improving the monitoring equipment such as various sensors or product-embedded information devices in recent years, joint assessment of these processes is inevitable for enhancing...... production problem called flexible job shop scheduling problem (FJSP). This integrated problem considers two maintenance scenarios in terms of corrective maintenance (CM) and preventive maintenance (PM). The activation of scenario is done by monitoring the degradation condition of the system and comparing...

  6. Multi-objective flexible job shop scheduling problem using variable neighborhood evolutionary algorithm

    Wang, Chun; Ji, Zhicheng; Wang, Yan

    2017-07-01

    In this paper, multi-objective flexible job shop scheduling problem (MOFJSP) was studied with the objects to minimize makespan, total workload and critical workload. A variable neighborhood evolutionary algorithm (VNEA) was proposed to obtain a set of Pareto optimal solutions. First, two novel crowded operators in terms of the decision space and object space were proposed, and they were respectively used in mating selection and environmental selection. Then, two well-designed neighborhood structures were used in local search, which consider the problem characteristics and can hold fast convergence. Finally, extensive comparison was carried out with the state-of-the-art methods specially presented for solving MOFJSP on well-known benchmark instances. The results show that the proposed VNEA is more effective than other algorithms in solving MOFJSP.

  7. Ant colony optimisation for scheduling of flexible job shop with multi-resources requirements

    Kalinowski Krzysztof

    2017-01-01

    Full Text Available The paper presents application of ant colony optimisation algorithm for scheduling multi-resources operations in flexible job shop type of production systems. Operations that require the participation of two or more resources are common in industrial practice, when planning are subject not only machines, but also other additional resources (personnel, tools, etc.. Resource requirements of operation are indicated indirectly by resource groups. The most important parameters of the resource model and resource groups are also described. A basic assumptions for ant colony algorithm used for scheduling in the considered model with multiresources requirements of operations is discussed. The main result of the research is the schema of metaheuristic that enables searching best-score solutions in manufacturing systems satisfying presented constraints.

  8. Bi-Objective Flexible Job-Shop Scheduling Problem Considering Energy Consumption under Stochastic Processing Times.

    Yang, Xin; Zeng, Zhenxiang; Wang, Ruidong; Sun, Xueshan

    2016-01-01

    This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems.

  9. A Hybrid Multiobjective Evolutionary Approach for Flexible Job-Shop Scheduling Problems

    Jian Xiong

    2012-01-01

    Full Text Available This paper addresses multiobjective flexible job-shop scheduling problem (FJSP with three simultaneously considered objectives: minimizing makespan, minimizing total workload, and minimizing maximal workload. A hybrid multiobjective evolutionary approach (H-MOEA is developed to solve the problem. According to the characteristic of FJSP, a modified crowding distance measure is introduced to maintain the diversity of individuals. In the proposed H-MOEA, well-designed chromosome representation and genetic operators are developed for FJSP. Moreover, a local search procedure based on critical path theory is incorporated in H-MOEA to improve the convergence ability of the algorithm. Experiment results on several well-known benchmark instances demonstrate the efficiency and stability of the proposed algorithm. The comparison with other recently published approaches validates that H-MOEA can obtain Pareto-optimal solutions with better quality and/or diversity.

  10. A Variable Interval Rescheduling Strategy for Dynamic Flexible Job Shop Scheduling Problem by Improved Genetic Algorithm

    Lei Wang

    2017-01-01

    Full Text Available In real-world manufacturing systems, production scheduling systems are often implemented under random or dynamic events like machine failure, unexpected processing times, stochastic arrival of the urgent orders, cancellation of the orders, and so on. These dynamic events will lead the initial scheduling scheme to be nonoptimal and/or infeasible. Hence, appropriate dynamic rescheduling approaches are needed to overcome the dynamic events. In this paper, we propose a dynamic rescheduling method based on variable interval rescheduling strategy (VIRS to deal with the dynamic flexible job shop scheduling problem considering machine failure, urgent job arrival, and job damage as disruptions. On the other hand, an improved genetic algorithm (GA is proposed for minimizing makespan. In our improved GA, a mix of random initialization population by combining initialization machine and initialization operation with random initialization is designed for generating high-quality initial population. In addition, the elitist strategy (ES and improved population diversity strategy (IPDS are used to avoid falling into the local optimal solution. Experimental results for static and several dynamic events in the FJSP show that our method is feasible and effective.

  11. Flexible Job-Shop Scheduling with Dual-Resource Constraints to Minimize Tardiness Using Genetic Algorithm

    Paksi, A. B. N.; Ma'ruf, A.

    2016-02-01

    In general, both machines and human resources are needed for processing a job on production floor. However, most classical scheduling problems have ignored the possible constraint caused by availability of workers and have considered only machines as a limited resource. In addition, along with production technology development, routing flexibility appears as a consequence of high product variety and medium demand for each product. Routing flexibility is caused by capability of machines that offers more than one machining process. This paper presents a method to address scheduling problem constrained by both machines and workers, considering routing flexibility. Scheduling in a Dual-Resource Constrained shop is categorized as NP-hard problem that needs long computational time. Meta-heuristic approach, based on Genetic Algorithm, is used due to its practical implementation in industry. Developed Genetic Algorithm uses indirect chromosome representative and procedure to transform chromosome into Gantt chart. Genetic operators, namely selection, elitism, crossover, and mutation are developed to search the best fitness value until steady state condition is achieved. A case study in a manufacturing SME is used to minimize tardiness as objective function. The algorithm has shown 25.6% reduction of tardiness, equal to 43.5 hours.

  12. A Novel Memetic Algorithm Based on Decomposition for Multiobjective Flexible Job Shop Scheduling Problem

    Chun Wang

    2017-01-01

    Full Text Available A novel multiobjective memetic algorithm based on decomposition (MOMAD is proposed to solve multiobjective flexible job shop scheduling problem (MOFJSP, which simultaneously minimizes makespan, total workload, and critical workload. Firstly, a population is initialized by employing an integration of different machine assignment and operation sequencing strategies. Secondly, multiobjective memetic algorithm based on decomposition is presented by introducing a local search to MOEA/D. The Tchebycheff approach of MOEA/D converts the three-objective optimization problem to several single-objective optimization subproblems, and the weight vectors are grouped by K-means clustering. Some good individuals corresponding to different weight vectors are selected by the tournament mechanism of a local search. In the experiments, the influence of three different aggregation functions is first studied. Moreover, the effect of the proposed local search is investigated. Finally, MOMAD is compared with eight state-of-the-art algorithms on a series of well-known benchmark instances and the experimental results show that the proposed algorithm outperforms or at least has comparative performance to the other algorithms.

  13. Multi-objective flexible job-shop scheduling problem using modified discrete particle swarm optimization.

    Huang, Song; Tian, Na; Wang, Yan; Ji, Zhicheng

    2016-01-01

    Taking resource allocation into account, flexible job shop problem (FJSP) is a class of complex scheduling problem in manufacturing system. In order to utilize the machine resources rationally, multi-objective particle swarm optimization (MOPSO) integrating with variable neighborhood search is introduced to address FJSP efficiently. Firstly, the assignment rules (AL) and dispatching rules (DR) are provided to initialize the population. And then special discrete operators are designed to produce new individuals and earliest completion machine (ECM) is adopted in the disturbance operator to escape the optima. Secondly, personal-best archives (cognitive memories) and global-best archive (social memory), which are updated by the predefined non-dominated archive update strategy, are simultaneously designed to preserve non-dominated individuals and select personal-best positions and the global-best position. Finally, three neighborhoods are provided to search the neighborhoods of global-best archive for enhancing local search ability. The proposed algorithm is evaluated by using Kacem instances and Brdata instances, and a comparison with other approaches shows the effectiveness of the proposed algorithm for FJSP.

  14. An Improved Version of Discrete Particle Swarm Optimization for Flexible Job Shop Scheduling Problem with Fuzzy Processing Time

    Song Huang

    2016-01-01

    Full Text Available The fuzzy processing time occasionally exists in job shop scheduling problem of flexible manufacturing system. To deal with fuzzy processing time, fuzzy flexible job shop model was established in several papers and has attracted numerous researchers’ attention recently. In our research, an improved version of discrete particle swarm optimization (IDPSO is designed to solve flexible job shop scheduling problem with fuzzy processing time (FJSPF. In IDPSO, heuristic initial methods based on triangular fuzzy number are developed, and a combination of six initial methods is applied to initialize machine assignment and random method is used to initialize operation sequence. Then, some simple and effective discrete operators are employed to update particle’s position and generate new particles. In order to guide the particles effectively, we extend global best position to a set with several global best positions. Finally, experiments are designed to investigate the impact of four parameters in IDPSO by Taguchi method, and IDPSO is tested on five instances and compared with some state-of-the-art algorithms. The experimental results show that the proposed algorithm can obtain better solutions for FJSPF and is more competitive than the compared algorithms.

  15. Comparative study of heuristics algorithms in solving flexible job shop scheduling problem with condition based maintenance

    Yahong Zheng

    2014-05-01

    Full Text Available Purpose: This paper focuses on a classic optimization problem in operations research, the flexible job shop scheduling problem (FJSP, to discuss the method to deal with uncertainty in a manufacturing system.Design/methodology/approach: In this paper, condition based maintenance (CBM, a kind of preventive maintenance, is suggested to reduce unavailability of machines. Different to the simultaneous scheduling algorithm (SSA used in the previous article (Neale & Cameron,1979, an inserting algorithm (IA is applied, in which firstly a pre-schedule is obtained through heuristic algorithm and then maintenance tasks are inserted into the pre-schedule scheme.Findings: It is encouraging that a new better solution for an instance in benchmark of FJSP is obtained in this research. Moreover, factually SSA used in literature for solving normal FJSPPM (FJSP with PM is not suitable for the dynamic FJSPPM. Through application in the benchmark of normal FJSPPM, it is found that although IA obtains inferior results compared to SSA used in literature, it performs much better in executing speed.Originality/value: Different to traditional scheduling of FJSP, uncertainty of machines is taken into account, which increases the complexity of the problem. An inserting algorithm (IA is proposed to solve the dynamic scheduling problem. It is stated that the quality of the final result depends much on the quality of the pre-schedule obtained during the procedure of solving a normal FJSP. In order to find the best solution of FJSP, a comparative study of three heuristics is carried out, the integrated GA, ACO and ABC. In the comparative study, we find that GA performs best in the three heuristic algorithms. Meanwhile, a new better solution for an instance in benchmark of FJSP is obtained in this research.

  16. Design and simulation of CONWIP in the complex flexible job shop of a Make-To-Order manufacturing firm ,

    Giovanni Romagnoli

    2015-01-01

    Full Text Available This paper presents a methodology for the design and integration of CONWIP in a make-to-order firm. The approach proposed was applied directly to the flexible job shop of a real manufacturing firm in order to assess the validity of the methodology. After the description of the whole plant layout, attention was focused on a section of the shop floor (21 workstations. The CONWIP system deals with multiple-product families and is characterized by path-type cards and a pull-from-the-bottleneck scheme. The cards release strategy and a customized dispatching rule were created to meet the firm’s specific needs. After the simulation model of the present state was built and validated, the future state to be implemented was created and simulated (i.e. the CONWIP system. The comparison between the two systems achieved excellent results, and showed that CONWIP is a very interesting tool for planning and controlling a complex flexible job shop.

  17. A Flexible Job Shop Scheduling Problem with Controllable Processing Times to Optimize Total Cost of Delay and Processing

    Hadi Mokhtari

    2015-11-01

    Full Text Available In this paper, the flexible job shop scheduling problem with machine flexibility and controllable process times is studied. The main idea is that the processing times of operations may be controlled by consumptions of additional resources. The purpose of this paper to find the best trade-off between processing cost and delay cost in order to minimize the total costs. The proposed model, flexible job shop scheduling with controllable processing times (FJCPT, is formulated as an integer non-linear programming (INLP model and then it is converted into an integer linear programming (ILP model. Due to NP-hardness of FJCPT, conventional analytic optimization methods are not efficient. Hence, in order to solve the problem, a Scatter Search (SS, as an efficient metaheuristic method, is developed. To show the effectiveness of the proposed method, numerical experiments are conducted. The efficiency of the proposed algorithm is compared with that of a genetic algorithm (GA available in the literature for solving FJSP problem. The results showed that the proposed SS provide better solutions than the existing GA.

  18. A hybrid job-shop scheduling system

    Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

    1992-01-01

    The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

  19. Genetic Algorithm Combined with Gradient Information for Flexible Job-shop Scheduling Problem with Different Varieties and Small Batches

    Chen Ming

    2017-01-01

    Full Text Available To solve the Flexible Job-shop Scheduling Problem (FJSP with different varieties and small batches, a modified meta-heuristic algorithm based on Genetic Algorithm (GA is proposed in which gene encoding is divided into process encoding and machine encoding, and according to the encoding mode, the machine gene fragment is connected with the process gene fragment and can be changed with the alteration of process genes. In order to get the global optimal solutions, the crossover and mutation operation of the process gene fragment and machine gene fragment are carried out respectively. In the initialization operation, the machines with shorter manufacturing time are more likely to be chosen to accelerate the convergence speed and then the tournament selection strategy is applied due to the minimum optimization objective. Meanwhile, a judgment condition of the crossover point quantity is introduced to speed up the population evolution and as an important interaction bridge between the current machine and alternative machines in the incidence matrix, a novel mutation operation of machine genes is proposed to achieve the replacement of manufacturing machines. The benchmark test shows the correctness of proposed algorithm and the case simulation proves the proposed algorithm has better performance compared with existing algorithms.

  20. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    Paolo Renna

    2017-03-01

    Full Text Available Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performance measures are compared with a system without any flexibility and no preventive maintenance actions. Different levels of flexibility and preventive maintenance actions are examined under a simulation environment. The simulation results highlight more important factors for the performance measures and the best combination of the factors to improve the performance.

  1. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    Paolo Renna

    2017-01-01

    Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performa...

  2. An Extended Flexible Job Shop Scheduling Model for Flight Deck Scheduling with Priority, Parallel Operations, and Sequence Flexibility

    Lianfei Yu

    2017-01-01

    Full Text Available Efficient scheduling for the supporting operations of aircrafts in flight deck is critical to the aircraft carrier, and even several seconds’ improvement may lead to totally converse outcome of a battle. In the paper, we ameliorate the supporting operations of carrier-based aircrafts and investigate three simultaneous operation relationships during the supporting process, including precedence constraints, parallel operations, and sequence flexibility. Furthermore, multifunctional aircrafts have to take off synergistically and participate in a combat cooperatively. However, their takeoff order must be restrictively prioritized during the scheduling period accorded by certain operational regulations. To efficiently prioritize the takeoff order while minimizing the total time budget on the whole takeoff duration, we propose a novel mixed integer liner programming formulation (MILP for the flight deck scheduling problem. Motivated by the hardness of MILP, we design an improved differential evolution algorithm combined with typical local search strategies to improve computational efficiency. We numerically compare the performance of our algorithm with the classical genetic algorithm and normal differential evolution algorithm and the results show that our algorithm obtains better scheduling schemes that can meet both the operational relations and the takeoff priority requirements.

  3. An economic lot and delivery scheduling problem with the fuzzy shelf life in a flexible job shop with unrelated parallel machines

    S. Dousthaghi

    2012-08-01

    Full Text Available This paper considers an economic lot and delivery scheduling problem (ELDSP in a fuzzy environment with the fuzzy shelf life for each product. This problem is formulated in a flexible job shop with unrelated parallel machines, when the planning horizon is finite and it determines lot sizing, scheduling and sequencing, simultaneously. The proposed model of this paper is based on the basic period (BP approach. In this paper, a mixed-integer nonlinear programming (MINLP model is presented and then it is changed into two models in the fuzzy shelf life. The main model is dependent to the multiple basic periods and it is difficult to solve the resulted proposed model for large-scale problems in reasonable amount of time; thus, an efficient heuristic method is proposed to solve the problem. The performance of the proposed model is demonstrated using some numerical examples.

  4. Job shop scheduling by local search

    Aarts, E.H.L.; Lenstra, J.K.; Laarhoven, van P.J.M.; Ulder, N.L.J.

    1992-01-01

    We present a computational performance analysis of local search algorithms for job shop scheduling. The algorithms under investigation are iterative improvement, simulated annealing, threshold accepting and genetic local search. Our study shows that simulated annealing performs best in the sense

  5. Scheduling job shop - A case study

    Abas, M.; Abbas, A.; Khan, W. A.

    2016-08-01

    The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

  6. Job shop scheduling by simulated annealing

    Laarhoven, van P.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1992-01-01

    We describe an approximation algorithm for the problem of finding the minimum makespan in a job shop. The algorithm is based on simulated annealing, a generalization of the well known iterative improvement approach to combinatorial optimization problems. The generalization involves the acceptance of

  7. Job shop scheduling by local search

    Vaessens, R.J.M.; Aarts, E.H.L.; Lenstra, J.K.

    1994-01-01

    We survey solution methods for the job shop scheduling problem with an emphasis on local search. We discuss both cleterministic and randomized local search methods as well as the applied neighborhoods. We compare the computational performance of the various methods in terms of their effectiveness

  8. Job shop fails choosy nurses.

    1993-10-13

    Only 181 people have used the Clearing House set up to find jobs for redundant London nurses. And almost a quarter have rejected the posts which it says are suitable for them, with 21 per cent of employers turning down candidates selected by the initiative.

  9. Ant Foraging Behavior for Job Shop Problem

    Mahad Diyana Abdul

    2016-01-01

    Full Text Available Ant Colony Optimization (ACO is a new algorithm approach, inspired by the foraging behavior of real ants. It has frequently been applied to many optimization problems and one such problem is in solving the job shop problem (JSP. The JSP is a finite set of jobs processed on a finite set of machine where once a job initiates processing on a given machine, it must complete processing and uninterrupted. In solving the Job Shop Scheduling problem, the process is measure by the amount of time required in completing a job known as a makespan and minimizing the makespan is the main objective of this study. In this paper, we developed an ACO algorithm to minimize the makespan. A real set of problems from a metal company in Johor bahru, producing 20 parts with jobs involving the process of clinching, tapping and power press respectively. The result from this study shows that the proposed ACO heuristics managed to produce a god result in a short time.

  10. Workload control in job shops, grasping the tap

    Land, Martin Jaap

    2004-01-01

    The term job shops is used to indicate companies that produce customer-specific components in small batches. Jobs (production orders) in a job shop are characterised by a large variety of routings and operation processing times. This variety, combined with irregular order arrivals, generally leads

  11. Forecasting of indirect consumables for a Job Shop

    Shakeel, M.; Khan, S.; Khan, W. A.

    2016-08-01

    A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

  12. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    OMAR CASTRILLON; WILLIAM SARACHE; JAIME GIRALDO

    2011-01-01

    El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos). Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son med...

  13. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  14. Constraint-based job shop scheduling with ILOG SCHEDULER

    Nuijten, W.P.M.; Le Pape, C.

    1998-01-01

    We introduce constraint-based scheduling and discuss its main principles. An approximation algorithm based on tree search is developed for the job shop scheduling problem using ILOG SCHEDULER. A new way of calculating lower bounds on the makespan of the job shop scheduling problem is presented and

  15. Job shop scheduling with makespan objective: A heuristic approach

    Mohsen Ziaee

    2014-04-01

    Full Text Available Job shop has been considered as one of the most challenging scheduling problems and there are literally tremendous efforts on reducing the complexity of solution procedure for solving job shop problem. This paper presents a heuristic method to minimize makespan for different jobs in a job shop scheduling. The proposed model is based on a constructive procedure to obtain good quality schedules, very quickly. The performance of the proposed model of this paper is examined on standard benchmarks from the literature in order to evaluate its performance. Computational results show that, despite its simplicity, the proposed heuristic is computationally efficient and practical approach for the problem.

  16. Machine Shop Suggested Job and Task Sheets. Part II. 21 Advanced Jobs.

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This volume consists of advanced job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-one advanced machine shop job sheets are included. Some or all of this material is provided for each job: an introductory sheet with aim, checking…

  17. Machine Shop Suggested Job and Task Sheets. Part I. 25 Elementary Jobs.

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This volume consists of elementary job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-five simple machine shop job sheets are included. Some or all of this material is provided for each job sheet: an introductory sheet with aim, checking…

  18. ARTIFICIAL INTELLIGENCE EFFECTIVENESS IN JOB SHOP ENVIRONMENTS

    OMAR CASTRILLON

    2011-01-01

    Full Text Available El objetivo del presente trabajo, es definir una nueva metodología la cual permita comparar la efectividad de algunas de las principales técnicas de inteligencia artificial (aleatorias, búsqueda tabú, minería de datos, algoritmos evolutivos. Esta metodología es aplicada en los procesos de secuenciación de la producción en ambientes job shop, en un problema con N pedidos y M máquinas, donde cada uno de los pedidos debe pasar por todas las máquinas sin importar el orden. Estas técnicas son medidas en las variables tiempo total de proceso, tiempo total muerto y porcentaje de utilización de las máquinas. Inicialmente, una revisión teórica fue realizada, esta muestra la utilidad y efectividad de la inteligencia artificial en los procesos de secuenciación de la producción. Posteriormente y con base en la experimentación planteada, los resultados obtenidos, muestran que estas técnicas presentan una efectividad superior al 95%, con un intervalo de confiabilidad del 99.5% medido en las variables objeto de estudio.

  19. JOB SHOP METHODOLOGY BASED ON AN ANT COLONY

    OMAR CASTRILLON

    2009-01-01

    Full Text Available The purpose of this study is to reduce the total process time (Makespan and to increase the machines working time, in a job shop environment, using a heuristic based on ant colony optimization. This work is developed in two phases: The first stage describes the identification and definition of heuristics for the sequential processes in the job shop. The second stage shows the effectiveness of the system in the traditional programming of production. A good solution, with 99% efficiency is found using this technique.

  20. Job flexibility and job insecurity : the Dutch case

    Klein Hesselink, D.J.; Vuuren, T. van

    1999-01-01

    Since the 1970s the flexible workforce in the Netherlands has been an important factor of labour force growth. The question raised in this article is whether job flexibility gives rise to feelings of job security. It appears that flexiworkers experience more job insecurity than workers with

  1. Penerapan Algoritma Genetika Untuk Masalah Penjadwalan Job Shop Pada Lingkungan Industri Pakaian

    Sitanggang, Hendrik

    2011-01-01

    Pada industri pakaian khususnya yang proses produksinya berbaur dan multi produk sering mengalami kesulitan pada penjadwalan job shop. Oleh karena itu, perlu diadakan penelitian untuk penjadwalan job shop yang efektif terutama yang proses produksinya berbaur dan multi produk. Pada tulisan ini akan diajukan metode untuk penjadwalan job shop yang berbaur dan multi produk dengan tujuan meminimalkan total pinalti E/T (Earliness/Tardiness) dengan menentukan start pada masing-masing job shop dan ba...

  2. No-Wait Job Shop Scheduling, a Constraint Propagation Approach

    Lennartz, P.M.

    2006-01-01

    Multi-machine scheduling problems have earned themselves a reputation of intractability. In this thesis we try to solve a special kind of these problems, the so-called no-wait job shop problems. In an instance of this problem-class we are given a number of operations that are to be executed on a

  3. Applicability aspects of workload control in job shop production

    Henrich, P.

    2005-01-01

    The term Job Shop Production (JSP) describes a manufacturing environment that produces piece goods in small batches. It is a common manufacturing environment in small and medium-sized enterprises (SMEs). The incoming orders often differ in the number of ordered products, their design, process

  4. The One-Stop Job Shop.

    Kiser, Kim

    1998-01-01

    Minnesota's WorkForce Centers are a model of state employment services. The centers assist those in need of initiatives such as dislocated worker programs, welfare-to-work services, services for the blind, employment-and-training programs, veterans' services, and job-search assistance. (JOW)

  5. Prevalence of job strain among Indian foundry shop floor workers.

    Mohan, G Madhan; Elangovan, S; Prasad, P S S; Krishna, P Rama; Mokkapati, Anil Kumar

    2008-01-01

    Global competition in manufacturing sector demand higher productivity levels. In this context, workers in this sector are set with high output targets, leading to job strain. In addition to the strain, hazardous conditions also prevail in some of the manufacturing processes like foundry activities. This paper attempts to appraise the prevalence of job strain among foundry shop floor workers in India with the help of Demands-Control model [8]. In this study, data was collected through a survey using 49-item Job Content Questionnaire (JCQ) [9], a widely used and well-validated test for job strain. Then the data was subjected to statistical analysis after ascertaining the reliability. This survey has revealed that 25% of workers in foundry were experiencing high job strain. Hazardous working conditions, limited decision making authority, etc. appear to be the main contributing factors for the higher levels of strain.

  6. The performance of workload control concepts in job shops : Improving the release method

    Land, MJ; Gaalman, GJC

    1998-01-01

    A specific class of production control concepts for jobs shops is based on the principles of workload control. Practitioners emphasise the importance of workload control. However, order release methods that reduce the workload on the shop floor show poor due date performance in job shop simulations.

  7. Job shop scheduling problem with late work criterion

    Piroozfard, Hamed; Wong, Kuan Yew

    2015-05-01

    Scheduling is considered as a key task in many industries, such as project based scheduling, crew scheduling, flight scheduling, machine scheduling, etc. In the machine scheduling area, the job shop scheduling problems are considered to be important and highly complex, in which they are characterized as NP-hard. The job shop scheduling problems with late work criterion and non-preemptive jobs are addressed in this paper. Late work criterion is a fairly new objective function. It is a qualitative measure and concerns with late parts of the jobs, unlike classical objective functions that are quantitative measures. In this work, simulated annealing was presented to solve the scheduling problem. In addition, operation based representation was used to encode the solution, and a neighbourhood search structure was employed to search for the new solutions. The case studies are Lawrence instances that were taken from the Operations Research Library. Computational results of this probabilistic meta-heuristic algorithm were compared with a conventional genetic algorithm, and a conclusion was made based on the algorithm and problem.

  8. Improved teaching-learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems

    Buddala, Raviteja; Mahapatra, Siba Sankar

    2017-11-01

    Flexible flow shop (or a hybrid flow shop) scheduling problem is an extension of classical flow shop scheduling problem. In a simple flow shop configuration, a job having `g' operations is performed on `g' operation centres (stages) with each stage having only one machine. If any stage contains more than one machine for providing alternate processing facility, then the problem becomes a flexible flow shop problem (FFSP). FFSP which contains all the complexities involved in a simple flow shop and parallel machine scheduling problems is a well-known NP-hard (Non-deterministic polynomial time) problem. Owing to high computational complexity involved in solving these problems, it is not always possible to obtain an optimal solution in a reasonable computation time. To obtain near-optimal solutions in a reasonable computation time, a large variety of meta-heuristics have been proposed in the past. However, tuning algorithm-specific parameters for solving FFSP is rather tricky and time consuming. To address this limitation, teaching-learning-based optimization (TLBO) and JAYA algorithm are chosen for the study because these are not only recent meta-heuristics but they do not require tuning of algorithm-specific parameters. Although these algorithms seem to be elegant, they lose solution diversity after few iterations and get trapped at the local optima. To alleviate such drawback, a new local search procedure is proposed in this paper to improve the solution quality. Further, mutation strategy (inspired from genetic algorithm) is incorporated in the basic algorithm to maintain solution diversity in the population. Computational experiments have been conducted on standard benchmark problems to calculate makespan and computational time. It is found that the rate of convergence of TLBO is superior to JAYA. From the results, it is found that TLBO and JAYA outperform many algorithms reported in the literature and can be treated as efficient methods for solving the FFSP.

  9. An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems

    Chandramouli Anandaraman

    2011-10-01

    Full Text Available Job Shop Scheduling Problem (JSSP and Flow Shop Scheduling Problem (FSSP are strong NP-complete combinatorial optimization problems among class of typical production scheduling problems. An improved Sheep Flock Heredity Algorithm (ISFHA is proposed in this paper to find a schedule of operations that can minimize makespan. In ISFHA, the pairwise mutation operation is replaced by a single point mutation process with a probabilistic property which guarantees the feasibility of the solutions in the local search domain. A Robust-Replace (R-R heuristic is introduced in place of chromosomal crossover to enhance the global search and to improve the convergence. The R-R heuristic is found to enhance the exploring potential of the algorithm and enrich the diversity of neighborhoods. Experimental results reveal the effectiveness of the proposed algorithm, whose optimization performance is markedly superior to that of genetic algorithms and is comparable to the best results reported in the literature.

  10. Performance comparison of some evolutionary algorithms on job shop scheduling problems

    Mishra, S. K.; Rao, C. S. P.

    2016-09-01

    Job Shop Scheduling as a state space search problem belonging to NP-hard category due to its complexity and combinational explosion of states. Several naturally inspire evolutionary methods have been developed to solve Job Shop Scheduling Problems. In this paper the evolutionary methods namely Particles Swarm Optimization, Artificial Intelligence, Invasive Weed Optimization, Bacterial Foraging Optimization, Music Based Harmony Search Algorithms are applied and find tuned to model and solve Job Shop Scheduling Problems. To compare about 250 Bench Mark instances have been used to evaluate the performance of these algorithms. The capabilities of each these algorithms in solving Job Shop Scheduling Problems are outlined.

  11. It's a Mall, Mall, Mall, Mall World: Jobs in Shopping Malls.

    Green, Kathleen

    1996-01-01

    Provides information about a variety of nonsales jobs available in shopping malls: mall management, customer service, marketing, operations, security, maintenance, and administration. Includes information about educational requirements. (JOW)

  12. EFFICIENT MULTI-OBJECTIVE EVOLUTIONARY ALGORITHM FOR JOB SHOP SCHEDULING

    Lei Deming; Wu Zhiming

    2005-01-01

    A new representation method is first presented based on priority rules. According to this method, each entry in the chromosome indicates that in the procedure of the Giffler and Thompson (GT) algorithm, the conflict occurring in the corresponding machine is resolved by the corresponding priority rule. Then crowding-measure multi-objective evolutionary algorithm (CMOEA) is designed,in which both archive maintenance and fitness assignment use crowding measure. Finally the comparisons between CMOEA and SPEA in solving 15 scheduling problems demonstrate that CMOEA is suitable to job shop scheduling.

  13. A review of scheduling problem and resolution methods in flexible flow shop

    Tian-Soon Lee

    2019-01-01

    Full Text Available The Flexible flow shop (FFS is defined as a multi-stage flow shops with multiple parallel machines. FFS scheduling problem is a complex combinatorial problem which has been intensively studied in many real world industries. This review paper gives a comprehensive exploration review on the FFS scheduling problem and guides the reader by considering and understanding different environmental assumptions, system constraints and objective functions for future research works. The published papers are classified into two categories. First is the FFS system characteristics and constraints including the problem differences and limitation defined by different studies. Second, the scheduling performances evaluation are elaborated and categorized into time, job and multi related objectives. In addition, the resolution approaches that have been used to solve FFS scheduling problems are discussed. This paper gives a comprehensive guide for the reader with respect to future research work on the FFS scheduling problem.

  14. REDUCING LEAD TIME USING FUZZY LOGIC AT JOB SHOP

    EMİN GÜNDOĞAR

    2000-06-01

    Full Text Available One problem encountering at the job shop scheduling is minimum production size of machine is different from each another. This case increases lead time. A new approach was improved to reduce lead time. In this new approach, the parts, which materials are in stock and orders coming very frequently are assigned to machine to reduce lead time. Due the fact that there are a lot of machine and orders, it is possible to become so1ne probletns. In this paper, fuzzy logic is used to cope with this problem. New approach was simulated at the job sop that has owner 15 machinery and 50 orders. Simulation results showed that new approach reduced lead time between 27.89% and 32.36o/o

  15. Application of Tabu Search Algorithm in Job Shop Scheduling

    Betrianis Betrianis

    2010-10-01

    Full Text Available Tabu Search is one of local search methods which is used to solve the combinatorial optimization problem. This method aimed is to make the searching process of the best solution in a complex combinatorial optimization problem(np hard, ex : job shop scheduling problem, became more effective, in a less computational time but with no guarantee to optimum solution.In this paper, tabu search is used to solve the job shop scheduling problem consists of 3 (three cases, which is ordering package of September, October and November with objective of minimizing makespan (Cmax. For each ordering package, there is a combination for initial solution and tabu list length. These result then  compared with 4 (four other methods using basic dispatching rules such as Shortest Processing Time (SPT, Earliest Due Date (EDD, Most Work Remaining (MWKR dan First Come First Served (FCFS. Scheduling used Tabu Search Algorithm is sensitive for variables changes and gives makespan shorter than scheduling used by other four methods.

  16. A neural network approach to job-shop scheduling.

    Zhou, D N; Cherkassky, V; Baldwin, T R; Olson, D E

    1991-01-01

    A novel analog computational network is presented for solving NP-complete constraint satisfaction problems, i.e. job-shop scheduling. In contrast to most neural approaches to combinatorial optimization based on quadratic energy cost function, the authors propose to use linear cost functions. As a result, the network complexity (number of neurons and the number of resistive interconnections) grows only linearly with problem size, and large-scale implementations become possible. The proposed approach is related to the linear programming network described by D.W. Tank and J.J. Hopfield (1985), which also uses a linear cost function for a simple optimization problem. It is shown how to map a difficult constraint-satisfaction problem onto a simple neural net in which the number of neural processors equals the number of subjobs (operations) and the number of interconnections grows linearly with the total number of operations. Simulations show that the authors' approach produces better solutions than existing neural approaches to job-shop scheduling, i.e. the traveling salesman problem-type Hopfield approach and integer linear programming approach of J.P.S. Foo and Y. Takefuji (1988), in terms of the quality of the solution and the network complexity.

  17. Integrating make-to-order and make-to-stock in job shop control

    Beemsterboer, Bart; Land, Martin; Teunter, Ruud; Bokhorst, Jos

    2017-01-01

    Demand fluctuations in make-to-order job shops lead to utilisation fluctuations and delivery delays, particularly in periods with high demand. Many job shop production companies therefore include some standardised products in their product mix and use a hybrid make-to-order/ make-to-stock production

  18. Genetic programming for evolving due-date assignment models in job shop environments.

    Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

    2014-01-01

    Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

  19. A RELATIONAL DATABASE APPROACH TO THE JOB SHOP SCHEDULING PROBLEM

    P. Lindeque

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper will attempt to illuminate the advantages of an approach to the job shop scheduling problem using priority based search algorithms and database technology. It will use as basis a system developed for and implemented at a large manufacturing plant. The paper will also attempt to make some predictions as to future developments in these techniques and look at the possibility of including new technologies such as expert systems.

    AFRIKAANSE OPSOMMING: Die voordele en toepaslikheid van prioriteits-gebaseerde soek-algoritmes en databasisstelsels op die taakwerkswinkelprobleem sal in hierdie artikel uitgelig word. 'n Stelsel wat by 'n groot vervaardigingsonderneming geimplementeer is, sal as uitgangspunt gebruik word. Toekomstige ontwikkelings in bogenoemde tegnieke en die moontlike insluiting van ekspertstelsels sal ook ondersoek word.

  20. Extended precedence preservative crossover for job shop scheduling problems

    Ong, Chung Sin; Moin, Noor Hasnah; Omar, Mohd

    2013-04-01

    Job shop scheduling problems (JSSP) is one of difficult combinatorial scheduling problems. A wide range of genetic algorithms based on the two parents crossover have been applied to solve the problem but multi parents (more than two parents) crossover in solving the JSSP is still lacking. This paper proposes the extended precedence preservative crossover (EPPX) which uses multi parents for recombination in the genetic algorithms. EPPX is a variation of the precedence preservative crossover (PPX) which is one of the crossovers that perform well to find the solutions for the JSSP. EPPX is based on a vector to determine the gene selected in recombination for the next generation. Legalization of children (offspring) can be eliminated due to the JSSP representation encoded by using permutation with repetition that guarantees the feasibility of chromosomes. The simulations are performed on a set of benchmarks from the literatures and the results are compared to ensure the sustainability of multi parents recombination in solving the JSSP.

  1. The Effects of Machine Load Sitnations on Performance of Job Shop and Group Scheduling

    Torkul, O.

    2018-01-01

    Perfonnance of job shop and group scheduling ndermulti­natch work input environment was exarnined against two nachine load (light and high load) situations. n order to conduct the analysis, a deterministic computer ;im ulation program was written and used. A job shop {JS) model is applied to the shop floor area and :ompared with a simulation of a similar proposal except hat group technology (GT) model was used in the shop loor area instead. )etailed analysis of the results from applying diffe...

  2. The Effects of Machine Load Sitnations on Performance of Job Shop and Group Scheduling

    O.TORKUL TORKUL

    1998-01-01

    Perfonnance of job shop and group scheduling ndermulti­natch work input environment was exarnined against two nachine load (light and high load) situations. n order to conduct the analysis, a deterministic computer ;im ulation program was written and used. A job shop {JS) model is applied to the shop floor area and :ompared with a simulation of a similar proposal except hat group technology (GT) model was used in the shop loor area instead. )etailed analysis of the results from applying diffe...

  3. On-line scheduling of two-machine open shops where jobs arrive over time

    Chen, B.; Vestjens, A.P.A.; Woeginger, G.J.

    1998-01-01

    We investigate the problem of on-line scheduling two-machine open shops with the objective of minimizing the makespan.Jobs arrive independently over time, and the existence of a job is not known until its arrival. In the clairvoyant on-line model, the processing requirement of every job becomes

  4. Due date assignment procedures with dynamically updated coefficients for multi-level assembly job shops

    Adam, N.R.; Bertrand, J.W.M.; Morehead, D.C.; Surkis, J.

    1993-01-01

    This paper presents a study of due date assignment procedures in job shop environments where multi-level assembly jobs are processed and due dates are internally assigned. Most of the reported studies in the literature have focused on string type jobs. We propose a dynamic update approach (which

  5. Genetic algorithm and neural network hybrid approach for job-shop scheduling

    Zhao, Kai; Yang, Shengxiang; Wang, Dingwei

    1998-01-01

    Copyright @ 1998 ACTA Press This paper proposes a genetic algorithm (GA) and constraint satisfaction adaptive neural network (CSANN) hybrid approach for job-shop scheduling problems. In the hybrid approach, GA is used to iterate for searching optimal solutions, CSANN is used to obtain feasible solutions during the iteration of genetic algorithm. Simulations have shown the valid performance of the proposed hybrid approach for job-shop scheduling with respect to the quality of solutions and ...

  6. PENGEMBANGAN ALGORITMA PENJADUALAN PRODUKSI JOB SHOP UNTUK MEMINIMUMKAN TOTAL BIAYA EARLINESS DAN TARDINESS

    Dian Retno Sari Dewi

    2005-12-01

    Full Text Available This paper develops job shop production scheduling using Non Delay algorithm through forward and backward-forward algorithm to minimize total earliness and tardiness costs. Backward approach has some disadvantages, such as, if the job is scheduled in backward, there is a possibility that the infeasible situation occurs, in which the job is scheduled at t<0. This paper used hypothetic data generated randomly. This job shop scheduling algorithm development was validated using LINDO software to check the effectiveness heuristic method, compared with the optimation method. The validation proves that the result of backward-forward scheduling method is better than the result of forward scheduling method.

  7. No-Wait Flexible Flow Shop Scheduling with Due Windows

    Rong-Hwa Huang

    2015-01-01

    Full Text Available To improve capacity and reduce processing time, the flow shop with multiprocessors (FSMP system is commonly used in glass, steel, and semiconductor production. No-wait FSMP is a modern production system that responds to periods when zero work is required in process production. The production process must be continuous and uninterrupted. Setup time must also be considered. Just-in-time (JIT production is very popular in industry, and timely delivery is important to customer satisfaction. Therefore, it is essential to consider the time window constraint, which is also very complex. This study focuses on a no-wait FSMP problem with time window constraint. An improved ant colony optimization (ACO, known as ant colony optimization with flexible update (ACOFU, is developed to solve the problem. The results demonstrate that ACOFU is more effective and robust than ACO when applied to small-scale problems. ACOFU has superior solution capacity and robustness when applied to large-scale problems. Therefore, this study concludes that the proposed algorithm ACOFU performs excellently when applied to the scheduling problem discussed in this study.

  8. Simulation as a planning tool for job-shop production environment

    Maram, Venkataramana; Nawawi, Mohd Kamal Bin Mohd; Rahman, Syariza Abdul; Sultan, Sultan Juma

    2015-12-01

    In this paper, we made an attempt to use discrete event simulation software ARENA® as a planning tool for job shop production environment. We considered job shop produces three types of Jigs with different sequence of operations to study and improve shop floor performance. The sole purpose of the study is to identifying options to improve machines utilization, reducing job waiting times at bottleneck machines. First, the performance of the existing system was evaluated by using ARENA®. Then identified improvement opportunities by analyzing base system results. Second, updated the model with most economical options. The proposed new system outperforms with that of the current base system by 816% improvement in delay times at paint shop by increase 2 to 3 and Jig cycle time reduces by Jig1 92%, Jig2 65% and Jig3 41% and hence new proposal was recommended.

  9. A Distributed Particle Swarm Optimization Zlgorithmfor Flexible Job-hop Scheduling Problem

    LIU Sheng--hui

    2017-06-01

    Full Text Available According to the characteristics of the Flexible job shop scheduling problem the minimum makespan as measures we proposed a distributed particle swarm optimization algorithm aiming to solve flexible job shop scheduling problem. The algorithm adopts the method of distributed ideas to solve problems and we are established for two multi agent particle swarm optimization model in this algorithm it can solve the traditional particle swarm optimization algorithm when making decisions in real time according to the emergencies. Finally some benthmark problems were experimented and the results are compared with the traditional algorithm. Experimental results proved that the developed distributed PSO is enough effective and efficient to solve the FJSP and it also verified the reasonableness of the multi}gent particle swarm optimization model.

  10. A tabu search algorithm for scheduling a single robot in a job-shop environment

    Hurink, Johann L.; Knust, S.

    1999-01-01

    We consider a single-machine scheduling problem which arises as a subproblem in a job-shop environment where the jobs have to be transported between the machines by a single transport robot. The robot scheduling problem may be regarded as a generalization of the travelling-salesman problem with time

  11. A tabu search algorithm for scheduling a single robot in a job-shop environment

    Hurink, Johann L.; Knust, Sigrid

    2002-01-01

    We consider a single-machine scheduling problem which arises as a subproblem in a job-shop environment where the jobs have to be transported between the machines by a single transport robot. The robot scheduling problem may be regarded as a generalization of the travelling-salesman problem with time

  12. Cultural-Based Genetic Tabu Algorithm for Multiobjective Job Shop Scheduling

    Yuzhen Yang

    2014-01-01

    Full Text Available The job shop scheduling problem, which has been dealt with by various traditional optimization methods over the decades, has proved to be an NP-hard problem and difficult in solving, especially in the multiobjective field. In this paper, we have proposed a novel quadspace cultural genetic tabu algorithm (QSCGTA to solve such problem. This algorithm provides a different structure from the original cultural algorithm in containing double brief spaces and population spaces. These spaces deal with different levels of populations globally and locally by applying genetic and tabu searches separately and exchange information regularly to make the process more effective towards promising areas, along with modified multiobjective domination and transform functions. Moreover, we have presented a bidirectional shifting for the decoding process of job shop scheduling. The computational results we presented significantly prove the effectiveness and efficiency of the cultural-based genetic tabu algorithm for the multiobjective job shop scheduling problem.

  13. A novel discrete PSO algorithm for solving job shop scheduling problem to minimize makespan

    Rameshkumar, K.; Rajendran, C.

    2018-02-01

    In this work, a discrete version of PSO algorithm is proposed to minimize the makespan of a job-shop. A novel schedule builder has been utilized to generate active schedules. The discrete PSO is tested using well known benchmark problems available in the literature. The solution produced by the proposed algorithms is compared with best known solution published in the literature and also compared with hybrid particle swarm algorithm and variable neighborhood search PSO algorithm. The solution construction methodology adopted in this study is found to be effective in producing good quality solutions for the various benchmark job-shop scheduling problems.

  14. Undermining mobilization? The effect of job flexibility and job instability on the willingness to strike

    Jansen, Giedo; Akkerman, Agnes; Vandaele, Kurt

    2017-01-01

    This article addresses the question of whether, and to what extent job flexibility is detrimental to mobilization with regard to the willingness to take part in industrial action. The authors examine the influence of job flexibility (‘standard’ versus ‘non-standard’ work) and job instability

  15. Preventive maintenance optimization for a multi-component system under changing job shop schedule

    Zhou Xiaojun; Lu Zhiqiang; Xi Lifeng

    2012-01-01

    Variability and small lot size is a common feature for many discrete manufacturing processes designed to meet a wide array of customer needs. Because of this, job shop schedule often has to be continuously updated in reaction to changes in production plan. Generally, the aim of preventive maintenance is to ensure production effectiveness and therefore the preventive maintenance models must have the ability to be adaptive to changes in job shop schedule. In this paper, a dynamic opportunistic preventive maintenance model is developed for a multi-component system with considering changes in job shop schedule. Whenever a job is completed, preventive maintenance opportunities arise for all the components in the system. An optimal maintenance practice is dynamically determined by maximizing the short-term cumulative opportunistic maintenance cost savings for the system. The numerical example shows that the scheme obtained by the proposed model can effectively address the preventive maintenance scheduling problem caused by the changes in job shop schedule and is more efficient than the ones based on two other commonly used preventive maintenance models.

  16. Skipping Strategy (SS) for Initial Population of Job-Shop Scheduling Problem

    Abdolrazzagh-Nezhad, M.; Nababan, E. B.; Sarim, H. M.

    2018-03-01

    Initial population in job-shop scheduling problem (JSSP) is an essential step to obtain near optimal solution. Techniques used to solve JSSP are computationally demanding. Skipping strategy (SS) is employed to acquire initial population after sequence of job on machine and sequence of operations (expressed in Plates-jobs and mPlates-jobs) are determined. The proposed technique is applied to benchmark datasets and the results are compared to that of other initialization techniques. It is shown that the initial population obtained from the SS approach could generate optimal solution.

  17. The finite horizon economic lot sizing problem in job shops : the multiple cycle approach

    Ouenniche, J.; Bertrand, J.W.M.

    2001-01-01

    This paper addresses the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the planning horizon length is finite and fixed by management. The objective pursued is to minimize the sum of setup costs, and work-in-process and

  18. Sequencing, lot sizing and scheduling in job shops: the common cycle approach

    Ouenniche, J.; Boctor, F.F.

    1998-01-01

    This paper deals with the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the objective is to minimize the sum of setup and inventory holding costs while satisfying the demand with no backlogging. To solve this problem, we

  19. Shopping for Jobs: Mall Internship Program Opens Doors for HVAC Students.

    Nolot, Terry

    1995-01-01

    Ivy Tech State College uses River Falls, a shopping mall, as an enormous heating, ventilation, and air conditioning laboratory. Students spend Saturdays working with full-time technicians getting invaluable training and experience. Students see the program as a professional opportunity and a direct route to jobs. (JOW)

  20. Proposed algorithm to improve job shop production scheduling using ant colony optimization method

    Pakpahan, Eka KA; Kristina, Sonna; Setiawan, Ari

    2017-12-01

    This paper deals with the determination of job shop production schedule on an automatic environment. On this particular environment, machines and material handling system are integrated and controlled by a computer center where schedule were created and then used to dictate the movement of parts and the operations at each machine. This setting is usually designed to have an unmanned production process for a specified interval time. We consider here parts with various operations requirement. Each operation requires specific cutting tools. These parts are to be scheduled on machines each having identical capability, meaning that each machine is equipped with a similar set of cutting tools therefore is capable of processing any operation. The availability of a particular machine to process a particular operation is determined by the remaining life time of its cutting tools. We proposed an algorithm based on the ant colony optimization method and embedded them on matlab software to generate production schedule which minimize the total processing time of the parts (makespan). We test the algorithm on data provided by real industry and the process shows a very short computation time. This contributes a lot to the flexibility and timelines targeted on an automatic environment.

  1. Iterated greedy algorithms to minimize the total family flow time for job-shop scheduling with job families and sequence-dependent set-ups

    Kim, Ji-Su; Park, Jung-Hyeon; Lee, Dong-Ho

    2017-10-01

    This study addresses a variant of job-shop scheduling in which jobs are grouped into job families, but they are processed individually. The problem can be found in various industrial systems, especially in reprocessing shops of remanufacturing systems. If the reprocessing shop is a job-shop type and has the component-matching requirements, it can be regarded as a job shop with job families since the components of a product constitute a job family. In particular, sequence-dependent set-ups in which set-up time depends on the job just completed and the next job to be processed are also considered. The objective is to minimize the total family flow time, i.e. the maximum among the completion times of the jobs within a job family. A mixed-integer programming model is developed and two iterated greedy algorithms with different local search methods are proposed. Computational experiments were conducted on modified benchmark instances and the results are reported.

  2. Minimizing tardiness for job shop scheduling under uncertainties

    Yahouni , Zakaria; Mebarki , Nasser; Sari , Zaki

    2016-01-01

    International audience; —Many disturbances can occur during the execution of a manufacturing scheduling process. To cope with this drawback , flexible solutions are proposed based on the offline and the online phase of the schedule. Groups of permutable operations is one of the most studied flexible scheduling methods bringing flexibility as well as quality to a schedule. The online phase of this method is based on a human-machine system allowing to choose in real-time one schedule from a set...

  3. Flexible automation and the loss of pooling synergy

    Slomp, Jannes; Zee, Durk-Jouke van der

    This paper focuses on the effects of flexible automation on the performance of a job shop. Flexible automated machines may significantly improve the delivery performance and the flow time of jobs. The insertion of a flexible automated system in a job shop, however, also has a counter effect on the

  4. Significant Tasks in Training of Job-Shop Supervisors

    Pederson, Leonard S.; Dresdow, Sally; Benson, Joy

    2013-01-01

    Purpose: The need for effective training of first-line supervisors is well established. Well-trained supervision is essential to our future as a country. A fundamental step in developing effective training is to develop a jobs needs assessment. In order to develop an effective needs assessment, it is necessary to know what the tasks are of…

  5. Evaluation and Selection of Best Priority Sequencing Rule in Job Shop Scheduling using Hybrid MCDM Technique

    Kiran Kumar, Kalla; Nagaraju, Dega; Gayathri, S.; Narayanan, S.

    2017-05-01

    Priority Sequencing Rules provide the guidance for the order in which the jobs are to be processed at a workstation. The application of different priority rules in job shop scheduling gives different order of scheduling. More experimentation needs to be conducted before a final choice is made to know the best priority sequencing rule. Hence, a comprehensive method of selecting the right choice is essential in managerial decision making perspective. This paper considers seven different priority sequencing rules in job shop scheduling. For evaluation and selection of the best priority sequencing rule, a set of eight criteria are considered. The aim of this work is to demonstrate the methodology of evaluating and selecting the best priority sequencing rule by using hybrid multi criteria decision making technique (MCDM), i.e., analytical hierarchy process (AHP) with technique for order preference by similarity to ideal solution (TOPSIS). The criteria weights are calculated by using AHP whereas the relative closeness values of all priority sequencing rules are computed based on TOPSIS with the help of data acquired from the shop floor of a manufacturing firm. Finally, from the findings of this work, the priority sequencing rules are ranked from most important to least important. The comprehensive methodology presented in this paper is very much essential for the management of a workstation to choose the best priority sequencing rule among the available alternatives for processing the jobs with maximum benefit.

  6. Solving multi-objective job shop problem using nature-based algorithms: new Pareto approximation features

    Jarosław Rudy

    2015-01-01

    Full Text Available In this paper the job shop scheduling problem (JSP with minimizing two criteria simultaneously is considered. JSP is frequently used model in real world applications of combinatorial optimization. Multi-objective job shop problems (MOJSP were rarely studied. We implement and compare two multi-agent nature-based methods, namely ant colony optimization (ACO and genetic algorithm (GA for MOJSP. Both of those methods employ certain technique, taken from the multi-criteria decision analysis in order to establish ranking of solutions. ACO and GA differ in a method of keeping information about previously found solutions and their quality, which affects the course of the search. In result, new features of Pareto approximations provided by said algorithms are observed: aside from the slight superiority of the ACO method the Pareto frontier approximations provided by both methods are disjoint sets. Thus, both methods can be used to search mutually exclusive areas of the Pareto frontier.

  7. A modified genetic algorithm with fuzzy roulette wheel selection for job-shop scheduling problems

    Thammano, Arit; Teekeng, Wannaporn

    2015-05-01

    The job-shop scheduling problem is one of the most difficult production planning problems. Since it is in the NP-hard class, a recent trend in solving the job-shop scheduling problem is shifting towards the use of heuristic and metaheuristic algorithms. This paper proposes a novel metaheuristic algorithm, which is a modification of the genetic algorithm. This proposed algorithm introduces two new concepts to the standard genetic algorithm: (1) fuzzy roulette wheel selection and (2) the mutation operation with tabu list. The proposed algorithm has been evaluated and compared with several state-of-the-art algorithms in the literature. The experimental results on 53 JSSPs show that the proposed algorithm is very effective in solving the combinatorial optimization problems. It outperforms all state-of-the-art algorithms on all benchmark problems in terms of the ability to achieve the optimal solution and the computational time.

  8. Constraint satisfaction adaptive neural network and heuristics combined approaches for generalized job-shop scheduling.

    Yang, S; Wang, D

    2000-01-01

    This paper presents a constraint satisfaction adaptive neural network, together with several heuristics, to solve the generalized job-shop scheduling problem, one of NP-complete constraint satisfaction problems. The proposed neural network can be easily constructed and can adaptively adjust its weights of connections and biases of units based on the sequence and resource constraints of the job-shop scheduling problem during its processing. Several heuristics that can be combined with the neural network are also presented. In the combined approaches, the neural network is used to obtain feasible solutions, the heuristic algorithms are used to improve the performance of the neural network and the quality of the obtained solutions. Simulations have shown that the proposed neural network and its combined approaches are efficient with respect to the quality of solutions and the solving speed.

  9. A Simulated Annealing-Based Heuristic Algorithm for Job Shop Scheduling to Minimize Lateness

    Rui Zhang

    2013-04-01

    Full Text Available A decomposition-based optimization algorithm is proposed for solving large job shop scheduling problems with the objective of minimizing the maximum lateness. First, we use the constraint propagation theory to derive the orientation of a portion of disjunctive arcs. Then we use a simulated annealing algorithm to find a decomposition policy which satisfies the maximum number of oriented disjunctive arcs. Subsequently, each subproblem (corresponding to a subset of operations as determined by the decomposition policy is successively solved with a simulated annealing algorithm, which leads to a feasible solution to the original job shop scheduling problem. Computational experiments are carried out for adapted benchmark problems, and the results show the proposed algorithm is effective and efficient in terms of solution quality and time performance.

  10. A Hybrid Differential Evolution and Tree Search Algorithm for the Job Shop Scheduling Problem

    Rui Zhang

    2011-01-01

    Full Text Available The job shop scheduling problem (JSSP is a notoriously difficult problem in combinatorial optimization. In terms of the objective function, most existing research has been focused on the makespan criterion. However, in contemporary manufacturing systems, due-date-related performances are more important because they are essential for maintaining a high service reputation. Therefore, in this study we aim at minimizing the total weighted tardiness in JSSP. Considering the high complexity, a hybrid differential evolution (DE algorithm is proposed for the problem. To enhance the overall search efficiency, a neighborhood property of the problem is discovered, and then a tree search procedure is designed and embedded into the DE framework. According to the extensive computational experiments, the proposed approach is efficient in solving the job shop scheduling problem with total weighted tardiness objective.

  11. Busca tabu para a programação de tarefas em job shop com datas de entrega

    Cintia Rigão Scrich

    1997-01-01

    Resumo: Este trabalho trata do problema de programação de tarefas nos ambientes job shop tradicional e job shop flexível com o objetivo de minimizar o atraso total das tarefas. A principal diferença do job shop flexível em relação ao job shop tradicional é que cada operação possui um conjunto de máquinas alternativas onde pode ser processada. Para cada um dos problemas é desenvolvida uma heurística guiada pela metaheurística Busca Tabu. Estratégias de diversificação e intensificação para a bu...

  12. Review of job shop scheduling research and its new perspectives under Industry 4.0

    Zhang, Jian; Ding, Guofu; Zou, Yisheng; Qin, Sheng-feng; Fu, Jianlin

    2017-01-01

    Traditional job shop scheduling is concentrated on centralized scheduling or semi-distributed scheduling. Under the Industry 4.0, the scheduling should deal with a smart and distributed manufacturing system supported by novel and emerging manufacturing technologies such as mass customization, Cyber-Physics Systems, Digital Twin, and SMAC (Social, Mobile, Analytics, Cloud). The scheduling research needs to shift its focus to smart distributed scheduling modeling and optimization. In order to t...

  13. A controlled genetic algorithm by fuzzy logic and belief functions for job-shop scheduling.

    Hajri, S; Liouane, N; Hammadi, S; Borne, P

    2000-01-01

    Most scheduling problems are highly complex combinatorial problems. However, stochastic methods such as genetic algorithm yield good solutions. In this paper, we present a controlled genetic algorithm (CGA) based on fuzzy logic and belief functions to solve job-shop scheduling problems. For better performance, we propose an efficient representational scheme, heuristic rules for creating the initial population, and a new methodology for mixing and computing genetic operator probabilities.

  14. Parallel Branch-and-Bound Methods for the Job Shop Scheduling

    Clausen, Jens; Perregaard, Michael

    1998-01-01

    Job-shop scheduling (JSS) problems are among the more difficult to solve in the class of NP-complete problems. The only successful approach has been branch-and-bound based algorithms, but such algorithms depend heavily on good bound functions. Much work has been done to identify such functions...... for the JSS problem, but with limited success. Even with recent methods, it is still not possible to solve problems substantially larger than 10 machines and 10 jobs. In the current study, we focus on parallel methods for solving JSS problems. We implement two different parallel branch-and-bound algorithms...

  15. Job shop scheduling model for non-identic machine with fixed delivery time to minimize tardiness

    Kusuma, K. K.; Maruf, A.

    2016-02-01

    Scheduling non-identic machines problem with low utilization characteristic and fixed delivery time are frequent in manufacture industry. This paper propose a mathematical model to minimize total tardiness for non-identic machines in job shop environment. This model will be categorized as an integer linier programming model and using branch and bound algorithm as the solver method. We will use fixed delivery time as main constraint and different processing time to process a job. The result of this proposed model shows that the utilization of production machines can be increase with minimal tardiness using fixed delivery time as constraint.

  16. Solving multi-objective job shop scheduling problems using a non-dominated sorting genetic algorithm

    Piroozfard, Hamed; Wong, Kuan Yew

    2015-05-01

    The efforts of finding optimal schedules for the job shop scheduling problems are highly important for many real-world industrial applications. In this paper, a multi-objective based job shop scheduling problem by simultaneously minimizing makespan and tardiness is taken into account. The problem is considered to be more complex due to the multiple business criteria that must be satisfied. To solve the problem more efficiently and to obtain a set of non-dominated solutions, a meta-heuristic based non-dominated sorting genetic algorithm is presented. In addition, task based representation is used for solution encoding, and tournament selection that is based on rank and crowding distance is applied for offspring selection. Swapping and insertion mutations are employed to increase diversity of population and to perform intensive search. To evaluate the modified non-dominated sorting genetic algorithm, a set of modified benchmarking job shop problems obtained from the OR-Library is used, and the results are considered based on the number of non-dominated solutions and quality of schedules obtained by the algorithm.

  17. Flexible labour, firm performance and the Dutch job creation miracle

    Kleinknecht, A.H.; Oostendorp, R.H.; Pradhan, M.P.; Naastepad, C.W.M.

    2006-01-01

    Unlike internal ('functional') forms of flexibility of labour, external ('numerical') forms of flexibility (i.e. high shares of people on temporary contract or a high turnover of personnel) yield substantial savings on a firm's wage bill. Savings on wage bills lead to higher job growth, but do not

  18. Generation of Look-Up Tables for Dynamic Job Shop Scheduling Decision Support Tool

    Oktaviandri, Muchamad; Hassan, Adnan; Mohd Shaharoun, Awaluddin

    2016-02-01

    Majority of existing scheduling techniques are based on static demand and deterministic processing time, while most job shop scheduling problem are concerned with dynamic demand and stochastic processing time. As a consequence, the solutions obtained from the traditional scheduling technique are ineffective wherever changes occur to the system. Therefore, this research intends to develop a decision support tool (DST) based on promising artificial intelligent that is able to accommodate the dynamics that regularly occur in job shop scheduling problem. The DST was designed through three phases, i.e. (i) the look-up table generation, (ii) inverse model development and (iii) integration of DST components. This paper reports the generation of look-up tables for various scenarios as a part in development of the DST. A discrete event simulation model was used to compare the performance among SPT, EDD, FCFS, S/OPN and Slack rules; the best performances measures (mean flow time, mean tardiness and mean lateness) and the job order requirement (inter-arrival time, due dates tightness and setup time ratio) which were compiled into look-up tables. The well-known 6/6/J/Cmax Problem from Muth and Thompson (1963) was used as a case study. In the future, the performance measure of various scheduling scenarios and the job order requirement will be mapped using ANN inverse model.

  19. Due Date Assignment in a Dynamic Job Shop with the Orthogonal Kernel Least Squares Algorithm

    Yang, D. H.; Hu, L.; Qian, Y.

    2017-06-01

    Meeting due dates is a key goal in the manufacturing industries. This paper proposes a method for due date assignment (DDA) by using the Orthogonal Kernel Least Squares Algorithm (OKLSA). A simulation model is built to imitate the production process of a highly dynamic job shop. Several factors describing job characteristics and system state are extracted as attributes to predict job flow-times. A number of experiments under conditions of varying dispatching rules and 90% shop utilization level have been carried out to evaluate the effectiveness of OKLSA applied for DDA. The prediction performance of OKLSA is compared with those of five conventional DDA models and back-propagation neural network (BPNN). The experimental results indicate that OKLSA is statistically superior to other DDA models in terms of mean absolute lateness and root mean squares lateness in most cases. The only exception occurs when the shortest processing time rule is used for dispatching jobs, the difference between OKLSA and BPNN is not statistically significant.

  20. Heuristic and Exact Algorithms for the Two-Machine Just in Time Job Shop Scheduling Problem

    Mohammed Al-Salem

    2016-01-01

    Full Text Available The problem addressed in this paper is the two-machine job shop scheduling problem when the objective is to minimize the total earliness and tardiness from a common due date (CDD for a set of jobs when their weights equal 1 (unweighted problem. This objective became very significant after the introduction of the Just in Time manufacturing approach. A procedure to determine whether the CDD is restricted or unrestricted is developed and a semirestricted CDD is defined. Algorithms are introduced to find the optimal solution when the CDD is unrestricted and semirestricted. When the CDD is restricted, which is a much harder problem, a heuristic algorithm is proposed to find approximate solutions. Through computational experiments, the heuristic algorithms’ performance is evaluated with problems up to 500 jobs.

  1. JOB SHOP SCHEDULING BIOBJETIVO MEDIANTE ENFRIAMIENTO SIMULADO Y ENFOQUE DE PARETO JOB-SHOP SCHEDULING: BIO-OBJECTIVE THROUGH SIMULATED COOLING AND PARETO PRINCIPLE

    Juan Carlos Osorio

    2012-12-01

    Full Text Available El problema del scheduling es uno de los problemas más ampliamente tratados en la literatura; sin embargo, es un problema complejo NP hard. Cuando, además, se involucra más de un objetivo, este problema se convierte en uno de los más complejos en el campo de la investigación de operaciones. Se presenta entonces un modelo biobjetivo para el job shop scheduling que incluye el makespan y el tiempo de flujo medio. Para resolver el modelo se ha utilizado una propuesta que incluye el uso del meta-heurístico Recocido Simulado (SA y el enfoque de Pareto. Este modelo es evaluado en tres problemas presentados en la literatura de tamaños 6x6, 10x5 y 10x10. Los resultados del modelo se comparan con otros meta-heurísticos y se encuentra que este modelo presenta buenos resultados en los tres problemas evaluados.The scheduling problem is one of the most widely treated problems in literature; however, it is an NP hard complex problem. Also, when more than one objective is involved, this problem becomes one of the most complex ones in the field of operations research. A bio-objective model is then emerged for the Job-Shop Scheduling, including makespan and mean flow time. For solving the model a proposal which includes the use of Simulated Annealing (SA metaheuristic and Pareto Principle. This model is evaluated in three problems described in literature with the following sizes: 6x6, 10x5 and 10x10. Results of the model are compared to other metaheuristics and it has been found that this model shows good results in the three problems evaluated.

  2. REPAIR SHOP JOB SCHEDULING WITH PARALLEL OPERATORS AND MULTIPLE CONSTRAINTS USING SIMULATED ANNEALING

    N. Shivasankaran

    2013-04-01

    Full Text Available Scheduling problems are generally treated as NP andash; complete combinatorial optimization problems which is a multi-objective and multi constraint one. Repair shop Job sequencing and operator allocation is one such NP andash; complete problem. For such problems, an efficient technique is required that explores a wide range of solution space. This paper deals with Simulated Annealing Technique, a Meta - heuristic to solve the complex Car Sequencing and Operator Allocation problem in a car repair shop. The algorithm is tested with several constraint settings and the solution quality exceeds the results reported in the literature with high convergence speed and accuracy. This algorithm could be considered as quite effective while other heuristic routine fails.

  3. Near-Optimal Heuristics for Just-In-Time Jobs Maximization in Flow Shop Scheduling

    Helio Yochihiro Fuchigami

    2018-04-01

    Full Text Available The number of just-in-time jobs maximization in a permutation flow shop scheduling problem is considered. A mixed integer linear programming model to represent the problem as well as solution approaches based on enumeration and constructive heuristics were proposed and computationally implemented. Instances with up to 10 jobs and five machines are solved by the mathematical model in an acceptable running time (3.3 min on average while the enumeration method consumes, on average, 1.5 s. The 10 constructive heuristics proposed show they are practical especially for large-scale instances (up to 100 jobs and 20 machines, with very good-quality results and efficient running times. The best two heuristics obtain near-optimal solutions, with only 0.6% and 0.8% average relative deviations. They prove to be better than adaptations of the NEH heuristic (well-known for providing very good solutions for makespan minimization in flow shop for the considered problem.

  4. The Implications of Flexible Staffing Arrangements for Job Stability

    Houseman, Susan N.; Polivka, Anne E.

    1999-01-01

    In this paper, we examine the job stability of workers in a wide range of flexible staffing arrangements: agency temporary, direct-hire temporary, on-call, contract company, independent contractor, and regular part-time work. We draw upon two data sources in our analysis. The first is a nationwide survey of employers on their use of flexible staffing arrangements conducted by the Upjohn Institute for Employment Research. This survey provides evidence on why employers use various types of flex...

  5. A Review On Job Shop Scheduling Using Non-Conventional Optimization Algorithm

    K.Mallikarjuna; Venkatesh.G

    2014-01-01

    A great deal of research has been focused on solving job shop scheduling problem (∫J), over the last four decades, resulting in a wide variety of approaches. Recently much effort has been concentrated on hybrid methods to solve ∫J, as a single technique cannot solve this stubborn problem. As a result much effort has recently been concentrated on techniques that lead to combinatorial optimization methods and a meta-strategy which guides the search out of local optima. In this p...

  6. Selective methodology of population dynamics for optimizing a multiobjective environment of job shop production

    Santiago Ruiz

    2015-01-01

    Full Text Available This paper develops a methodology based on population genetics to improve the performance of two or more variables in job shop production systems. The methodology applies a genetic algorithm with special features in the individual selection when they pass from generation to generation. In comparison with the FIFO method, the proposed methodology showed better results in the variables makespan, idle time and energy cost. When compared with NSGA II, the methodology did not showed relevant differences in makespan and idle time; however better performance was obtained in energy cost and, especially, in the number of required iterations to get the optimal makespan.

  7. Neighbourhood generation mechanism applied in simulated annealing to job shop scheduling problems

    Cruz-Chávez, Marco Antonio

    2015-11-01

    This paper presents a neighbourhood generation mechanism for the job shop scheduling problems (JSSPs). In order to obtain a feasible neighbour with the generation mechanism, it is only necessary to generate a permutation of an adjacent pair of operations in a scheduling of the JSSP. If there is no slack time between the adjacent pair of operations that is permuted, then it is proven, through theory and experimentation, that the new neighbour (schedule) generated is feasible. It is demonstrated that the neighbourhood generation mechanism is very efficient and effective in a simulated annealing.

  8. Optimising Job-Shop Functions Utilising the Score-Function Method

    Nielsen, Erland Hejn

    2000-01-01

    During the last 1-2 decades, simulation optimisation of discrete event dynamic systems (DEDS) has made considerable theoretical progress with respect to computational efficiency. The score-function (SF) method and the infinitesimal perturbation analysis (IPA) are two candidates belonging to this ......During the last 1-2 decades, simulation optimisation of discrete event dynamic systems (DEDS) has made considerable theoretical progress with respect to computational efficiency. The score-function (SF) method and the infinitesimal perturbation analysis (IPA) are two candidates belonging...... of a Job-Shop can be handled by the SF method....

  9. A Markov chain analysis of the effectiveness of drum-buffer-rope material flow management in job shop environment

    Masoud Rabbani

    2015-09-01

    Full Text Available The theory of constraints is an approach for production planning and control, which emphasizes on the constraints in the system to increase throughput. The theory of constraints is often referred to as Drum-Buffer-Rope developed originally by Goldratt. Drum-Buffer-Rope uses the drum or constraint to create a schedule based on the finite capacity of the first bottleneck. Because of complexity of the job shop environment, Drum-Buffer-Rope material flow management has very little attention to job shop environment. The objective of this paper is to apply the Drum-Buffer-Rope technique in the job shop environment using a Markov chain analysis to compare traditional method with Drum-Buffer-Rope. Four measurement parameters were considered and the result showed the advantage of Drum-Buffer-Rope approach compared with traditional one.

  10. Integrating make-to-order and make-to-stock in job shop control (Reprint of International Journal of Production Economics 185, pp 1-10)

    Beemsterboer, Bart; Land, Martin; Teunter, Ruud; Bokhorst, Jos

    2017-01-01

    Demand fluctuations in make-to-order job shops lead to utilisation fluctuations and delivery delays, particularly in periods with high demand. Many job shop production companies therefore include some standardised products in their product mix and use a hybrid make-to-order/make-to-stock production

  11. Analysis of dispatching rules in a stochastic dynamic job shop manufacturing system with sequence-dependent setup times

    Sharma, Pankaj; Jain, Ajai

    2014-12-01

    Stochastic dynamic job shop scheduling problem with consideration of sequence-dependent setup times are among the most difficult classes of scheduling problems. This paper assesses the performance of nine dispatching rules in such shop from makespan, mean flow time, maximum flow time, mean tardiness, maximum tardiness, number of tardy jobs, total setups and mean setup time performance measures viewpoint. A discrete event simulation model of a stochastic dynamic job shop manufacturing system is developed for investigation purpose. Nine dispatching rules identified from literature are incorporated in the simulation model. The simulation experiments are conducted under due date tightness factor of 3, shop utilization percentage of 90% and setup times less than processing times. Results indicate that shortest setup time (SIMSET) rule provides the best performance for mean flow time and number of tardy jobs measures. The job with similar setup and modified earliest due date (JMEDD) rule provides the best performance for makespan, maximum flow time, mean tardiness, maximum tardiness, total setups and mean setup time measures.

  12. A New Method Based on Simulation-Optimization Approach to Find Optimal Solution in Dynamic Job-shop Scheduling Problem with Breakdown and Rework

    Farzad Amirkhani

    2017-03-01

    The proposed method is implemented on classical job-shop problems with objective of makespan and results are compared with mixed integer programming model. Moreover, the appropriate dispatching priorities are achieved for dynamic job-shop problem minimizing a multi-objective criteria. The results show that simulation-based optimization are highly capable to capture the main characteristics of the shop and produce optimal/near-optimal solutions with highly credibility degree.

  13. Hybrid Discrete Differential Evolution Algorithm for Lot Splitting with Capacity Constraints in Flexible Job Scheduling

    Xinli Xu

    2013-01-01

    Full Text Available A two-level batch chromosome coding scheme is proposed to solve the lot splitting problem with equipment capacity constraints in flexible job shop scheduling, which includes a lot splitting chromosome and a lot scheduling chromosome. To balance global search and local exploration of the differential evolution algorithm, a hybrid discrete differential evolution algorithm (HDDE is presented, in which the local strategy with dynamic random searching based on the critical path and a random mutation operator is developed. The performance of HDDE was experimented with 14 benchmark problems and the practical dye vat scheduling problem. The simulation results showed that the proposed algorithm has the strong global search capability and can effectively solve the practical lot splitting problems with equipment capacity constraints.

  14. Flexible automation and the loss of pooling synergy

    Slomp, Jannes; Zee, Durk-Jouke van der

    2001-01-01

    This paper focuses on the effects of flexible automation on the performance of a job shop. Flexible automated machines may significantly improve the delivery performance and the flow time of jobs. The insertion of a flexible automated system in a job shop, however, also has a counter effect on the manufacturing performance. This is caused by the reduction of pooling synergy due to the dedication implied by flexible automated machines. This paper investigates by means of a simulation study to ...

  15. Proposta de classificação hierarquizada dos modelos de solução para o problema de job shop scheduling A proposition of hierarchical classification for solution models in the job shop scheduling problem

    Ricardo Ferrari Pacheco

    1999-04-01

    Full Text Available Este artigo propõe uma classificação hierarquizada dos modelos utilizados na solução do problema de programação da produção intermitente do tipo job shop, incluindo tanto os que fornecem solução ótima, quanto os modelos heurísticos mais recentes baseados em métodos de busca estendida. Por meio dessa classificação obteve-se um painel amplo dos modelos existentes, evidenciando as diferentes abordagens do problema e suas soluções, com o objetivo de proporcionar uma orientação preliminar na escolha do modelo de job shop scheduling mais adequado.This paper proposes a hierarchical model classification used in the job shop scheduling problem, including those that provide an optimal solution and the more recent ones based on heuristics, called extended search methods. A panel with the existing models is obtained by this classification, and solutions and approach differences are highlighted with the aim of a preliminary orientation on the choice of a more adequate job shop scheduling model.

  16. Cobacabana (control of balance by card-based navigation) : A card-based system for job shop control

    Land, M.J.

    Existing card-based production control systems such as Kanban are mostly dedicated to repetitive production environments. Cards-based systems for job shop control are lacking, while particularly this industry segment shows a need for simple control systems. This paper aims at filling the gap by

  17. A Comparison of the DISASTER (Trademark) Scheduling Software with a Simultaneous Scheduling Algorithm for Minimizing Maximum Tardiness in Job Shops

    1993-09-01

    goal ( Heizer , Render , and Stair, 1993:94). Integer Prgronmming. Integer programming is a general purpose approach used to optimally solve job shop...Scheduling," Operations Research Journal. 29, No 4: 646-667 (July-August 1981). Heizer , Jay, Barry Render and Ralph M. Stair, Jr. Production and Operations

  18. Hybrid Genetic Algorithm with Multiparents Crossover for Job Shop Scheduling Problems

    Noor Hasnah Moin

    2015-01-01

    Full Text Available The job shop scheduling problem (JSSP is one of the well-known hard combinatorial scheduling problems. This paper proposes a hybrid genetic algorithm with multiparents crossover for JSSP. The multiparents crossover operator known as extended precedence preservative crossover (EPPX is able to recombine more than two parents to generate a single new offspring distinguished from common crossover operators that recombine only two parents. This algorithm also embeds a schedule generation procedure to generate full-active schedule that satisfies precedence constraints in order to reduce the search space. Once a schedule is obtained, a neighborhood search is applied to exploit the search space for better solutions and to enhance the GA. This hybrid genetic algorithm is simulated on a set of benchmarks from the literatures and the results are compared with other approaches to ensure the sustainability of this algorithm in solving JSSP. The results suggest that the implementation of multiparents crossover produces competitive results.

  19. Three hybridization models based on local search scheme for job shop scheduling problem

    Balbi Fraga, Tatiana

    2015-05-01

    This work presents three different hybridization models based on the general schema of Local Search Heuristics, named Hybrid Successive Application, Hybrid Neighborhood, and Hybrid Improved Neighborhood. Despite similar approaches might have already been presented in the literature in other contexts, in this work these models are applied to analyzes the solution of the job shop scheduling problem, with the heuristics Taboo Search and Particle Swarm Optimization. Besides, we investigate some aspects that must be considered in order to achieve better solutions than those obtained by the original heuristics. The results demonstrate that the algorithms derived from these three hybrid models are more robust than the original algorithms and able to get better results than those found by the single Taboo Search.

  20. The comparison of predictive scheduling algorithms for different sizes of job shop scheduling problems

    Paprocka, I.; Kempa, W. M.; Grabowik, C.; Kalinowski, K.; Krenczyk, D.

    2016-08-01

    In the paper a survey of predictive and reactive scheduling methods is done in order to evaluate how the ability of prediction of reliability characteristics influences over robustness criteria. The most important reliability characteristics are: Mean Time to Failure, Mean Time of Repair. Survey analysis is done for a job shop scheduling problem. The paper answers the question: what method generates robust schedules in the case of a bottleneck failure occurrence before, at the beginning of planned maintenance actions or after planned maintenance actions? Efficiency of predictive schedules is evaluated using criteria: makespan, total tardiness, flow time, idle time. Efficiency of reactive schedules is evaluated using: solution robustness criterion and quality robustness criterion. This paper is the continuation of the research conducted in the paper [1], where the survey of predictive and reactive scheduling methods is done only for small size scheduling problems.

  1. An Artificial Bee Colony Algorithm for the Job Shop Scheduling Problem with Random Processing Times

    Rui Zhang

    2011-09-01

    Full Text Available Due to the influence of unpredictable random events, the processing time of each operation should be treated as random variables if we aim at a robust production schedule. However, compared with the extensive research on the deterministic model, the stochastic job shop scheduling problem (SJSSP has not received sufficient attention. In this paper, we propose an artificial bee colony (ABC algorithm for SJSSP with the objective of minimizing the maximum lateness (which is an index of service quality. First, we propose a performance estimate for preliminary screening of the candidate solutions. Then, the K-armed bandit model is utilized for reducing the computational burden in the exact evaluation (through Monte Carlo simulation process. Finally, the computational results on different-scale test problems validate the effectiveness and efficiency of the proposed approach.

  2. Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

    Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

    2017-07-01

    Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

  3. Solving no-wait two-stage flexible flow shop scheduling problem with unrelated parallel machines and rework time by the adjusted discrete Multi Objective Invasive Weed Optimization and fuzzy dominance approach

    Jafarzadeh, Hassan; Moradinasab, Nazanin; Gerami, Ali

    2017-01-01

    Adjusted discrete Multi-Objective Invasive Weed Optimization (DMOIWO) algorithm, which uses fuzzy dominant approach for ordering, has been proposed to solve No-wait two-stage flexible flow shop scheduling problem. Design/methodology/approach: No-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times and probable rework in both stations, different ready times for all jobs and rework times for both stations as well as unrelated parallel machines with regards to the simultaneous minimization of maximum job completion time and average latency functions have been investigated in a multi-objective manner. In this study, the parameter setting has been carried out using Taguchi Method based on the quality indicator for beater performance of the algorithm. Findings: The results of this algorithm have been compared with those of conventional, multi-objective algorithms to show the better performance of the proposed algorithm. The results clearly indicated the greater performance of the proposed algorithm. Originality/value: This study provides an efficient method for solving multi objective no-wait two-stage flexible flow shop scheduling problem by considering sequence-dependent setup times, probable rework in both stations, different ready times for all jobs, rework times for both stations and unrelated parallel machines which are the real constraints.

  4. Variable Neighbourhood Search and Mathematical Programming for Just-in-Time Job-Shop Scheduling Problem

    Sunxin Wang

    2014-01-01

    Full Text Available This paper presents a combination of variable neighbourhood search and mathematical programming to minimize the sum of earliness and tardiness penalty costs of all operations for just-in-time job-shop scheduling problem (JITJSSP. Unlike classical E/T scheduling problem with each job having its earliness or tardiness penalty cost, each operation in this paper has its earliness and tardiness penalties, which are paid if the operation is completed before or after its due date. Our hybrid algorithm combines (i a variable neighbourhood search procedure to explore the huge feasible solution spaces efficiently by alternating the swap and insertion neighbourhood structures and (ii a mathematical programming model to optimize the completion times of the operations for a given solution in each iteration procedure. Additionally, a threshold accepting mechanism is proposed to diversify the local search of variable neighbourhood search. Computational results on the 72 benchmark instances show that our algorithm can obtain the best known solution for 40 problems, and the best known solutions for 33 problems are updated.

  5. New Mathematical Model and Algorithm for Economic Lot Scheduling Problem in Flexible Flow Shop

    H. Zohali

    2018-03-01

    Full Text Available This paper addresses the lot sizing and scheduling problem for a number of products in flexible flow shop with identical parallel machines. The production stages are in series, while separated by finite intermediate buffers. The objective is to minimize the sum of setup and inventory holding costs per unit of time. The available mathematical model of this problem in the literature suffers from huge complexity in terms of size and computation. In this paper, a new mixed integer linear program is developed for delay with the huge dimentions of the problem. Also, a new meta heuristic algorithm is developed for the problem. The results of the numerical experiments represent a significant advantage of the proposed model and algorithm compared with the available models and algorithms in the literature.

  6. Performance Implications of Buffer Overflow as a Key (Disturbing) Element in the Flow Control of a Job/Flow Shop Facility

    Nielsen, Erland Hejn

    2002-01-01

    From time to time most real life job/flow shops will experience more or less severe buffer problems in relation to the operation at its various stations in the shop. Due to temporary non-predictable variations in the job flow intensity the assigned buffer space in front of a given critical station...... to temporary buffer overflow situations. This paper will investigate the impact of buffer overflow on several key performance measures of relevance to the overall operation of a job/flow shop facility. Several simple job/flow shop structures will be considered in this paper including re-entrant system set......-ups (a re-entrant system is a system where some of the job-routes revisit a given station more than once)....

  7. Performance Implications of Buffer overflow as a key (Disturbing) Element in the Flow Control of a Job/Flow Shop Facility

    Nielsen, Erland Hejn

    2002-01-01

    From time to time most real life job/flow shops will experience more or less severe buffer problems in relation to the operation at its various stations in the shop. Due to temporary non-predictable variations in the job flow intensity the assigned buffer space in front of a given critical station...... to temporary buffer overflow situations. This paper will investigate the impact of buffer overflow on several key performance measures of relevance to the overall operation of a job/flow shop facility. Several simple job/flow shop structures will be considered in this paper including re-entrant system set......-ups (a re-entrant system is a system where some of the job-routes revisit a given station more than once)....

  8. Are flexible contracts bad for workers? Evidence from job satisfaction data

    Green, C; Heywood, J S

    2007-01-01

    If workers can choose between permanent and flexible contracts, compensating wage differentials should arise to equalize on-the-job utility in the two types of contracts. Estimating job satisfaction using the British Household Panel Survey shows that agency and casual contracts are associated with routinely lower satisfaction. This results because the low job satisfaction associated with less job security is not offset by higher compensation or other job characteristics. Job security is suffi...

  9. Avaliação de regras de sequenciamento da produção em ambientes Job shop e Flow shop por meio de simulação computacional

    Edna Barbosa da Silva

    2012-01-01

    Full Text Available In this work, the computational simulation is employed to study the effects of production sequencing rules in the performance of Job shop and Flow shop manufacturing environments. Eight sequencing rules were considered: SIPT (Shortest Imminent Processing Time, EDD (Earliest Due Date, DLS (Dynamic Least Slack, LWQ (Least Work in next Queue, FIFO (First In First Out, LIFO (Last In Last Out, CR (Critical Ratio and LS (Least Slack. These different sequencing rules were evaluated in relation to the makespan, total tardiness and number of tardy jobs, considering an experimental scenario which includes two configurations with eight machines (processes and ten different types of orders. A simulation model was developed with Arena software, incorporating randomness of order arrivals and the production times in such environments. The results show that the EDD and SIPT rules presented the best performances in the Job shop and in the Flow shop environments, respectively.

  10. Evaluating the mathematical models to Solve Job Shop Problem with the Use of human resources specialists in projects

    Renato Penha

    2012-10-01

    Full Text Available A project can be defined as a complex system. This requires the use of resources (human, material, technology, etc., allocated among alternative uses, as a means to achieve specific goals by the presence of constraints of different orders. The planning, allocation and prioritization of resources, including human resource specialists (HRE, is performed by means of single project management.This treatment can cause internal strife by using the same resource or even its underuse, and may worsen in software development environments due to the high degree of interdependence, uncertainty and risk of each project. This need is related to the so called Job Shop Problem (JSP. In this context, the objective of this study is to evaluate the mathematical models of genetic algorithm and optimization and their contributions to solve Job Shop Problem in software development projects with the use of human resources specialists.

  11. Production Scheduling in Complex Job Shops from an Industrie 4.0 Perspective: A Review and Challenges in the Semiconductor Industry

    Waschneck, Bernd; Bauernhansl, Thomas; Altenmüller, Thomas; Kyek, Andreas

    2017-01-01

    On the one hand, Industrie 4.0 has recently emerged as the keyword for increasing productivity in the 21st century. On the other hand, production scheduling in a Complex Job Shop (CJS) environment, such as wafer fabrication facilities, has drawn interest of researchers dating back to the 1950s [65, 18]. Although both research areas overlap, there seems to be very little interchange of ideas. This review presents and assesses production scheduling techniques in complex job shops from an Indust...

  12. Processing time tolerance-based ACO algorithm for solving job-shop scheduling problem

    Luo, Yabo; Waden, Yongo P.

    2017-06-01

    Ordinarily, Job Shop Scheduling Problem (JSSP) is known as NP-hard problem which has uncertainty and complexity that cannot be handled by a linear method. Thus, currently studies on JSSP are concentrated mainly on applying different methods of improving the heuristics for optimizing the JSSP. However, there still exist many problems for efficient optimization in the JSSP, namely, low efficiency and poor reliability, which can easily trap the optimization process of JSSP into local optima. Therefore, to solve this problem, a study on Ant Colony Optimization (ACO) algorithm combined with constraint handling tactics is carried out in this paper. Further, the problem is subdivided into three parts: (1) Analysis of processing time tolerance-based constraint features in the JSSP which is performed by the constraint satisfying model; (2) Satisfying the constraints by considering the consistency technology and the constraint spreading algorithm in order to improve the performance of ACO algorithm. Hence, the JSSP model based on the improved ACO algorithm is constructed; (3) The effectiveness of the proposed method based on reliability and efficiency is shown through comparative experiments which are performed on benchmark problems. Consequently, the results obtained by the proposed method are better, and the applied technique can be used in optimizing JSSP.

  13. A Hyper-Heuristic Ensemble Method for Static Job-Shop Scheduling.

    Hart, Emma; Sim, Kevin

    2016-01-01

    We describe a new hyper-heuristic method NELLI-GP for solving job-shop scheduling problems (JSSP) that evolves an ensemble of heuristics. The ensemble adopts a divide-and-conquer approach in which each heuristic solves a unique subset of the instance set considered. NELLI-GP extends an existing ensemble method called NELLI by introducing a novel heuristic generator that evolves heuristics composed of linear sequences of dispatching rules: each rule is represented using a tree structure and is itself evolved. Following a training period, the ensemble is shown to outperform both existing dispatching rules and a standard genetic programming algorithm on a large set of new test instances. In addition, it obtains superior results on a set of 210 benchmark problems from the literature when compared to two state-of-the-art hyper-heuristic approaches. Further analysis of the relationship between heuristics in the evolved ensemble and the instances each solves provides new insights into features that might describe similar instances.

  14. Automatic programming via iterated local search for dynamic job shop scheduling.

    Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

    2015-01-01

    Dispatching rules have been commonly used in practice for making sequencing and scheduling decisions. Due to specific characteristics of each manufacturing system, there is no universal dispatching rule that can dominate in all situations. Therefore, it is important to design specialized dispatching rules to enhance the scheduling performance for each manufacturing environment. Evolutionary computation approaches such as tree-based genetic programming (TGP) and gene expression programming (GEP) have been proposed to facilitate the design task through automatic design of dispatching rules. However, these methods are still limited by their high computational cost and low exploitation ability. To overcome this problem, we develop a new approach to automatic programming via iterated local search (APRILS) for dynamic job shop scheduling. The key idea of APRILS is to perform multiple local searches started with programs modified from the best obtained programs so far. The experiments show that APRILS outperforms TGP and GEP in most simulation scenarios in terms of effectiveness and efficiency. The analysis also shows that programs generated by APRILS are more compact than those obtained by genetic programming. An investigation of the behavior of APRILS suggests that the good performance of APRILS comes from the balance between exploration and exploitation in its search mechanism.

  15. Design of an automatic production monitoring system on job shop manufacturing

    Prasetyo, Hoedi; Sugiarto, Yohanes; Rosyidi, Cucuk Nur

    2018-02-01

    Every production process requires monitoring system, so the desired efficiency and productivity can be monitored at any time. This system is also needed in the job shop type of manufacturing which is mainly influenced by the manufacturing lead time. Processing time is one of the factors that affect the manufacturing lead time. In a conventional company, the recording of processing time is done manually by the operator on a sheet of paper. This method is prone to errors. This paper aims to overcome this problem by creating a system which is able to record and monitor the processing time automatically. The solution is realized by utilizing electric current sensor, barcode, RFID, wireless network and windows-based application. An automatic monitoring device is attached to the production machine. It is equipped with a touch screen-LCD so that the operator can use it easily. Operator identity is recorded through RFID which is embedded in his ID card. The workpiece data are collected from the database by scanning the barcode listed on its monitoring sheet. A sensor is mounted on the machine to measure the actual machining time. The system's outputs are actual processing time and machine's capacity information. This system is connected wirelessly to a workshop planning application belongs to the firm. Test results indicated that all functions of the system can run properly. This system successfully enables supervisors, PPIC or higher level management staffs to monitor the processing time quickly with a better accuracy.

  16. Comparing Mixed & Integer Programming vs. Constraint Programming by solving Job-Shop Scheduling Problems

    Renata Melo e Silva de Oliveira

    2015-03-01

    Full Text Available Scheduling is a key factor for operations management as well as for business success. From industrial Job-shop Scheduling problems (JSSP, many optimization challenges have emerged since de 1960s when improvements have been continuously required such as bottlenecks allocation, lead-time reductions and reducing response time to requests.  With this in perspective, this work aims to discuss 3 different optimization models for minimizing Makespan. Those 3 models were applied on 17 classical problems of examples JSSP and produced different outputs.  The first model resorts on Mixed and Integer Programming (MIP and it resulted on optimizing 60% of the studied problems. The other models were based on Constraint Programming (CP and approached the problem in two different ways: a model CP1 is a standard IBM algorithm whereof restrictions have an interval structure that fail to solve 53% of the proposed instances, b Model CP-2 approaches the problem with disjunctive constraints and optimized 88% of the instances. In this work, each model is individually analyzed and then compared considering: i Optimization success performance, ii Computational processing time, iii Greatest Resource Utilization and, iv Minimum Work-in-process Inventory. Results demonstrated that CP-2 presented best results on criteria i and ii, but MIP was superior on criteria iii and iv and those findings are discussed at the final section of this work.

  17. Hybrid particle swarm optimization with Cauchy distribution for solving reentrant flexible flow shop with blocking constraint

    Chatnugrob Sangsawang

    2016-06-01

    Full Text Available This paper addresses a problem of the two-stage flexible flow shop with reentrant and blocking constraints in Hard Disk Drive Manufacturing. This problem can be formulated as a deterministic FFS|stage=2,rcrc, block|Cmax problem. In this study, adaptive Hybrid Particle Swarm Optimization with Cauchy distribution (HPSO was developed to solve the problem. The objective of this research is to find the sequences in order to minimize the makespan. To show their performances, computational experiments were performed on a number of test problems and the results are reported. Experimental results show that the proposed algorithms give better solutions than the classical Particle Swarm Optimization (PSO for all test problems. Additionally, the relative improvement (RI of the makespan solutions obtained by the proposed algorithms with respect to those of the current practice is performed in order to measure the quality of the makespan solutions generated by the proposed algorithms. The RI results show that the HPSO algorithm can improve the makespan solution by averages of 14.78%.

  18. Multi-Objective Flexible Flow Shop Scheduling Problem Considering Variable Processing Time due to Renewable Energy

    Xiuli Wu

    2018-03-01

    Full Text Available Renewable energy is an alternative to non-renewable energy to reduce the carbon footprint of manufacturing systems. Finding out how to make an alternative energy-efficient scheduling solution when renewable and non-renewable energy drives production is of great importance. In this paper, a multi-objective flexible flow shop scheduling problem that considers variable processing time due to renewable energy (MFFSP-VPTRE is studied. First, the optimization model of the MFFSP-VPTRE is formulated considering the periodicity of renewable energy and the limitations of energy storage capacity. Then, a hybrid non-dominated sorting genetic algorithm with variable local search (HNSGA-II is proposed to solve the MFFSP-VPTRE. An operation and machine-based encoding method is employed. A low-carbon scheduling algorithm is presented. Besides the crossover and mutation, a variable local search is used to improve the offspring’s Pareto set. The offspring and the parents are combined and those that dominate more are selected to continue evolving. Finally, two groups of experiments are carried out. The results show that the low-carbon scheduling algorithm can effectively reduce the carbon footprint under the premise of makespan optimization and the HNSGA-II outperforms the traditional NSGA-II and can solve the MFFSP-VPTRE effectively and efficiently.

  19. Heuristic for production scheduling on job-shop plants considering preventive maintenance tasks

    Ronald Díaz-Cazaña

    2014-01-01

    Full Text Available El análisis simultáneo de la programación de la producción y la s tareas de mantenimiento preventivo atrae especial atención en los investigadores debido a su gran complejidad y por ende la neces idad de encontrar métodos eficientes para resolver este tipo de problema combinatorio. Este artículo presenta un enfoque heurístico para resolver dicha problemática en plantas tipo job-shop . El método de solución incluye un modelo de programación lineal inspirado en el proble ma del Agente Vendedor, donde el tiempo de iniciación es consid erado como métrica de distancia. El método persigue obtener una secue ncia de las órdenes de producción y tareas de mantenimiento pre ventivo que reduzcan el tiempo ocioso y los retrasos simultáneamente, c umpliendo con el programa de mantenimiento. Luego de encontrar la solución óptima para cada máquina, un factor de corrección ( CF es determinado como la nueva medida de distancia. El factor CF considera la estructura inicial de solución, la utilización de las máquin as y las prioridades en los productos. De esta forma, la soluci ón final es alcanzada solucionando el modelo de programación lineal usando los valores de distancia actualizados. Finalmente, la heurístic a propuesta es aplicada en un caso de estudio real de la Industria Cubana. Los resultados experimentales indicaron una reducción significa tiva del tiempo ocioso para la compañía objeto de estudio.

  20. Minimizing makespan in a two-stage flow shop with parallel batch-processing machines and re-entrant jobs

    Huang, J. D.; Liu, J. J.; Chen, Q. X.; Mao, N.

    2017-06-01

    Against a background of heat-treatment operations in mould manufacturing, a two-stage flow-shop scheduling problem is described for minimizing makespan with parallel batch-processing machines and re-entrant jobs. The weights and release dates of jobs are non-identical, but job processing times are equal. A mixed-integer linear programming model is developed and tested with small-scale scenarios. Given that the problem is NP hard, three heuristic construction methods with polynomial complexity are proposed. The worst case of the new constructive heuristic is analysed in detail. A method for computing lower bounds is proposed to test heuristic performance. Heuristic efficiency is tested with sets of scenarios. Compared with the two improved heuristics, the performance of the new constructive heuristic is superior.

  1. Método para definição de layout em sistemas job-shop baseado em dados históricos Historical data-based job-shop layout systems definition method

    Maurício Tomelin

    2010-01-01

    Full Text Available O presente trabalho propõe um método para a solução do problema de definição de layout tipo job-shop baseado em dados históricos de produção, recursos disponíveis e características de produção. Os parâmetros utilizados foram a quantidade total e a frequência de vendas, a lucratividade, o tempo total de processamento e o tempo de espera de cada produto, gerando assim a classificação dos produtos. Os roteiros de produção foram comparados e, em função dos parâmetros, foi determinado o grau de importância de cada ligação entre os recursos. As ligações foram submetidas a um modelo matemático para a determinação da posição de cada recurso no layout. O método desenvolvido foi aplicado a uma empresa de usinagem com característica de job-shop. Os dados submetidos ao método permitiram uma sugestão de layout que tem como objetivo minimizar a distância dos recursos de processamento.This paper proposes a method for solving the job-shop layout problem definition, based on historical production data, available resources and production characteristics. The products were classified according to total sales, sales frequency, profitability, total processing time and stand-by time. The production path was compared and the degree of importance of each link between resources was determined. Path comparisons were made to quantify the same routes and the route differences, generating similar routes. The links were submitted to a mathematical model to determine the position of resources in the layout. The method developed was applied to a machining company with a job-shop profile. When the company's data was subjected to the method, it enabled the development of a layout, the main goal of which was to minimize distances between product-processing resources.

  2. DESIGN OF A HYPERHEURISTIC FOR PRODUCTION SCHEDULING IN JOB SHOP ENVIRONMENTS DISEÑO DE UNA HIPERHEURISTICA PARA LA PROGRAMACION DE LA PRODUCCIÓN EN AMBIENTES JOB SHOP

    Omar Danilo Castrillón

    2010-08-01

    Full Text Available The objective of the present work is to diminish the total process time (Makespan and to increase the machine process time, by diminishing the idle time in a job-shop environment. Through the design of a hyper-heuristic based on an ant colony and genetic algorithms. This work is developed in two phases: in the first phase, a hyper-heuristic identification and definition is carried out for sequencing processes in job shop environments. In the second phase, the system effectiveness in the traditional production programming is shown. In the investigation project, an enterprise from the metal mechanic sector was chosen, where by means of a combination of an ant colony and genetic algorithms, the optimal route for an order is scheduled, achieving the optimization or suboptimization of its respective total process time in an upper percentage of 95%.El objetivo del presente trabajo es disminuir el tiempo de proceso (Makespan e incrementar el tiempo de trabajo de las maquinas, diminuyendo el tiempo de ocio en ambientes de Job Shop, a través del diseño de una Hiper-heurística basada en colonia de hormigas y algoritmos genéticos. Este trabajo se desarrolla en dos etapas: en la primera se realiza la definición e identificación de una Hiper-heurística para la secuenciación de procesos en ambientes Job shop. En la segunda etapa, es mostrada la efectividad del sistema en la programación de la producción. En el proyecto de investigación, se seleccionó una empresa del sector metalmecánico, donde por medio de una combinación de colonia de hormigas y algoritmos genéticos, se programa la ruta óptima para un pedido, logrando la optimización o suboptimización de su respectivo tiempo total de proceso en un porcentaje superior al 95%.

  3. A PMBGA to Optimize the Selection of Rules for Job Shop Scheduling Based on the Giffler-Thompson Algorithm

    Rui Zhang

    2012-01-01

    Full Text Available Most existing research on the job shop scheduling problem has been focused on the minimization of makespan (i.e., the completion time of the last job. However, in the fiercely competitive market nowadays, delivery punctuality is more important for maintaining a high service reputation. So in this paper, we aim at solving job shop scheduling problems with the total weighted tardiness objective. Several dispatching rules are adopted in the Giffler-Thompson algorithm for constructing active schedules. It is noticeable that the rule selections for scheduling consecutive operations are not mutually independent but actually interrelated. Under such circumstances, a probabilistic model-building genetic algorithm (PMBGA is proposed to optimize the sequence of selected rules. First, we use Bayesian networks to model the distribution characteristics of high-quality solutions in the population. Then, the new generation of individuals is produced by sampling the established Bayesian network. Finally, some elitist individuals are further improved by a special local search module based on parameter perturbation. The superiority of the proposed approach is verified by extensive computational experiments and comparisons.

  4. COMPARISON BETWEEN MIXED INTEGER PROGRAMMING WITH HEURISTIC METHOD FOR JOB SHOP SCHEDULING WITH SEPARABLE SEQUENCE-DEPENDENT SETUPS

    I Gede Agus Widyadana

    2001-01-01

    Full Text Available The decisions to choose appropriate tools for solving industrial problems are not just tools that achieve optimal solution only but it should consider computation time too. One of industrial problems that still difficult to achieve both criteria is scheduling problem. This paper discuss comparison between mixed integer programming which result optimal solution and heuristic method to solve job shop scheduling problem with separable sequence-dependent setup. The problems are generated and the result shows that the heuristic methods still cannot satisfy optimal solution.

  5. The impact of flexible benefits plans on job satisfaction, organizational commitment and turnover intentions.

    Heshizer, B

    1994-01-01

    This study assesses the dimensionality of employee attitudes toward flexible benefits plans and the impact of these plans on measures of job satisfaction, commitment and turnover intent. The study points to the need for more work on the measurement of employee attitudes toward flexible benefits and on the nomological framework of flexible benefits as a construct in compensation research.

  6. A decomposition heuristics based on multi-bottleneck machines for large-scale job shop scheduling problems

    Yingni Zhai

    2014-10-01

    Full Text Available Purpose: A decomposition heuristics based on multi-bottleneck machines for large-scale job shop scheduling problems (JSP is proposed.Design/methodology/approach: In the algorithm, a number of sub-problems are constructed by iteratively decomposing the large-scale JSP according to the process route of each job. And then the solution of the large-scale JSP can be obtained by iteratively solving the sub-problems. In order to improve the sub-problems' solving efficiency and the solution quality, a detection method for multi-bottleneck machines based on critical path is proposed. Therewith the unscheduled operations can be decomposed into bottleneck operations and non-bottleneck operations. According to the principle of “Bottleneck leads the performance of the whole manufacturing system” in TOC (Theory Of Constraints, the bottleneck operations are scheduled by genetic algorithm for high solution quality, and the non-bottleneck operations are scheduled by dispatching rules for the improvement of the solving efficiency.Findings: In the process of the sub-problems' construction, partial operations in the previous scheduled sub-problem are divided into the successive sub-problem for re-optimization. This strategy can improve the solution quality of the algorithm. In the process of solving the sub-problems, the strategy that evaluating the chromosome's fitness by predicting the global scheduling objective value can improve the solution quality.Research limitations/implications: In this research, there are some assumptions which reduce the complexity of the large-scale scheduling problem. They are as follows: The processing route of each job is predetermined, and the processing time of each operation is fixed. There is no machine breakdown, and no preemption of the operations is allowed. The assumptions should be considered if the algorithm is used in the actual job shop.Originality/value: The research provides an efficient scheduling method for the

  7. A Hybrid Genetic Algorithm with a Knowledge-Based Operator for Solving the Job Shop Scheduling Problems

    Hamed Piroozfard

    2016-01-01

    Full Text Available Scheduling is considered as an important topic in production management and combinatorial optimization in which it ubiquitously exists in most of the real-world applications. The attempts of finding optimal or near optimal solutions for the job shop scheduling problems are deemed important, because they are characterized as highly complex and NP-hard problems. This paper describes the development of a hybrid genetic algorithm for solving the nonpreemptive job shop scheduling problems with the objective of minimizing makespan. In order to solve the presented problem more effectively, an operation-based representation was used to enable the construction of feasible schedules. In addition, a new knowledge-based operator was designed based on the problem’s characteristics in order to use machines’ idle times to improve the solution quality, and it was developed in the context of function evaluation. A machine based precedence preserving order-based crossover was proposed to generate the offspring. Furthermore, a simulated annealing based neighborhood search technique was used to improve the local exploitation ability of the algorithm and to increase its population diversity. In order to prove the efficiency and effectiveness of the proposed algorithm, numerous benchmarked instances were collected from the Operations Research Library. Computational results of the proposed hybrid genetic algorithm demonstrate its effectiveness.

  8. Performance evaluation of different types of particle representation procedures of Particle Swarm Optimization in Job-shop Scheduling Problems

    Izah Anuar, Nurul; Saptari, Adi

    2016-02-01

    This paper addresses the types of particle representation (encoding) procedures in a population-based stochastic optimization technique in solving scheduling problems known in the job-shop manufacturing environment. It intends to evaluate and compare the performance of different particle representation procedures in Particle Swarm Optimization (PSO) in the case of solving Job-shop Scheduling Problems (JSP). Particle representation procedures refer to the mapping between the particle position in PSO and the scheduling solution in JSP. It is an important step to be carried out so that each particle in PSO can represent a schedule in JSP. Three procedures such as Operation and Particle Position Sequence (OPPS), random keys representation and random-key encoding scheme are used in this study. These procedures have been tested on FT06 and FT10 benchmark problems available in the OR-Library, where the objective function is to minimize the makespan by the use of MATLAB software. Based on the experimental results, it is discovered that OPPS gives the best performance in solving both benchmark problems. The contribution of this paper is the fact that it demonstrates to the practitioners involved in complex scheduling problems that different particle representation procedures can have significant effects on the performance of PSO in solving JSP.

  9. An corrigendum on the paper : Solving the job-shop scheduling problem optimally by dynamic programming (Computers and Operations Research 39(12) (2968–2977) (S0305054812000500) (10.1016/j.cor.2012.02.024))

    van Hoorn, Jelke J.; Nogueira, Agustín; Ojea, Ignacio; Gromicho Dos Santos, Joaquim Antonio

    2017-01-01

    In [1] an algorithm is proposed for solving the job-shop scheduling problem optimally using a dynamic programming strategy. This is, according to our knowledge, the first exact algorithm for the Job Shop problem which is not based on integer linear programming and branch and bound. Despite the

  10. Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

    Tang, Dunbing; Dai, Min

    2015-09-01

    The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

  11. Job Demands, Job Resources, and Flexible Competence: The Mediating Role of Teachers’ Profession

    Evers, Arnoud; Van der Heijden, Béatrice; Kreijns, Karel; Vermeulen, Marjan

    2017-01-01

    Building upon previous research that focused on the relationships between job demands, job resources, and employee psychological well-being, this longitudinal research makes a unique contribution by relating job demands and job resources to teachers’ professional development (TPD) at work and

  12. Employment flexibility, job security and job satisfaction of knowledge workers in Poland

    Wilzcynska, Aleksandra; Batorski, Dominik; Torrent Sellens, Joan

    2014-01-01

    A number of empirical studies have shown a positive influence of employment stability on job satisfaction. Employment stability, usually measured by a proxy, "type of contract”, may affect one's job satisfaction directly, as well as through an impact on other relative variables, such as job security, as a stable position seem to bring individuals a sense of security. The aim of the research is to investigate the relationships between job security, employment stability and job satisfaction of ...

  13. Access to flexible work arrangements, working-time fit and job satisfaction

    Possenriede, D.S.; Plantenga, J.

    2011-01-01

    This article analyses the effects of access to flexible work arrangements, namely flexi-time, telehomework and part-time work, on employees’ satisfaction with the fit between paid work and private life and their overall job satisfaction. Having access to flexible work arrangements gives employees

  14. Revisiting the NEH algorithm- the power of job insertion technique for optimizing the makespan in permutation flow shop scheduling

    A. Baskar

    2016-04-01

    Full Text Available Permutation flow shop scheduling problems have been an interesting area of research for over six decades. Out of the several parameters, minimization of makespan has been studied much over the years. The problems are widely regarded as NP-Complete if the number of machines is more than three. As the computation time grows exponentially with respect to the problem size, heuristics and meta-heuristics have been proposed by many authors that give reasonably accurate and acceptable results. The NEH algorithm proposed in 1983 is still considered as one of the best simple, constructive heuristics for the minimization of makespan. This paper analyses the powerful job insertion technique used by NEH algorithm and proposes seven new variants, the complexity level remains same. 120 numbers of problem instances proposed by Taillard have been used for the purpose of validating the algorithms. Out of the seven, three produce better results than the original NEH algorithm.

  15. 76 FR 3827 - Regulatory Flexibility, Small Business, and Job Creation

    2011-01-21

    ..., economic growth, and job creation. More than half of all Americans working in the private sector either are... imposing unnecessary burdens on the public. The RFA emphasizes the importance of recognizing ``differences... also encourages public participation in and transparency about the rulemaking process. Among other...

  16. Proportionate Flow Shop Games

    Estevez Fernandez, M.A.; Mosquera, M.A.; Borm, P.E.M.; Hamers, H.J.M.

    2006-01-01

    In a proportionate flow shop problem several jobs have to be processed through a fixed sequence of machines and the processing time of each job is equal on all machines.By identifying jobs with agents, whose costs linearly depend on the completion time of their jobs, and assuming an initial

  17. Relationship Between Work-Family Conflict, Job Embeddedness, Workplace Flexibility, and Turnover Intentions

    Afsar, Bilal; Ur Rehman, Zia

    2017-01-01

    The present study seeks to propose and test a research model that investigates job embeddedness as a mediator and workplace flexibility as a moderator of the effect of family-work conflict on turnover intentions. This study uses a survey method and a structured questionnaire to collect data from 187 nurses working in various hospitals in Islamabad, Pakistan. The results showed that on-the-job embeddedness partially mediated the effect of work-family conflict on nurses' turnover intention. Fur...

  18. UN ALGORITMO GENÉTICO HÍBRIDO Y UN ENFRIAMIENTO SIMULADO PARA SOLUCIONAR EL PROBLEMA DE PROGRAMACIÓN DE PEDIDOS JOB SHOP UM ALGORITMO GENÉTICO HÍBRIDO E UM ESFRIAMENTO SIMULADO PARA SOLUCIONAR O PROBLEMA DE PROGRAMAÇÃO DE PEDIDOS JOB SHOP A HYBRID GENETIC ALGORITHM AND A SIMULATED ANNEALING FOR SOLVING THE JOB SHOP SCHEDULING PROBLEM

    José David Meisel

    2010-07-01

    Full Text Available La programación de pedidos para el problema de producción Job Shop (JSP, catalogado como NP-Hard, ha constituido un reto para la comunidad científica, debido a que alcanzar una solución óptima a este problema se dificulta en la medida que crece en número de máquinas y trabajos. Numerosas técnicas, entre ellas las metaheurísticas, se han empleado para su solución, sin embargo, su eficiencia, en cuanto a tiempo computacional, no ha sido muy satisfactoria. Por lo anterior y para contribuir a la solución de este problema, se planteó el uso de un enfriamiento simulado propuesto (ESP y de un algoritmo genético mejorado (AGM. Para el AGM se implementó una estrategia de enfriamiento simulado en la fase de mutación, que permite al algoritmo intensificar y diversificar las soluciones al mismo tiempo, con el fin de que no converja prematuramente a un óptimo local. Los resultados mostraron que los algoritmos propuestos arrojan buenos resultados, con desviaciones alrededor de los mejores valores encontrados que no superan el 5 % para los problemas más complejos.A programação de pedidos para o problema de produção Job Shop (JSP, catalogado como NP-Hard, tem constituído um desafio para a comunidade científica, devido a que alcançar uma solução ótima a este problema se dificulta na medida em que cresce em número de máquinas e trabalhos. Numerosas técnicas, entre elas as metaheurísticas, foram empregadas para sua solução, no entanto, sua eficiência, em quanto a tempo computacional, não há sido muito satisfatória. Pelo anterior e para contribuir à solução deste problema, propôs-se o uso de um esfriamento simulado proposto (ESP e de um algoritmo genético melhorado (AGM. Para o AGM se implementou uma estratégia de esfriamento simulado na fase de mutação, que permite ao algoritmo intensificar e diversificar as soluções ao mesmo tempo, com o objetivo de que não convirja prematuramente a um ótimo local. Os resultados

  19. Regional labour market analysis and policy evaluation: Job insecurity, flexibility and complexity. Evidence from Switzerland

    Baruffini, Moreno; Maggi, Rico

    2014-01-01

    The thesis focuses on labour market flexibility, security and complexity. The research is divided into three chapters: two of the chapters specifically relate to perceived security, flexibility and job satisfaction, using data from the longitudinal Swiss Household Panel (SHP), while the last investigates labour market programs and their impact on a regional labour market. The first essay analyses perceptions of economic insecurity in Switzerland, during the business cycle between 2008 an...

  20. Job flexibility in Latin America: A comparative analysis

    Manuel Alejandro Ibarra Cisneros

    2010-01-01

    Full Text Available Most of studies about labor flexibility show a partial image of the situation of Latin America labor markets. They are limited to confirm, the existence of high degrees of rigidity and the necessity to conduct labor reforms to the margin of specific national circumstances. The design of a synthetic labor rigidity indicator using methodology considered by the oecd, through a factor analysis for countries of IberoAmerica, allows obtaining certain advances in relation to this debate. The results establish the high importance of the rigidity in the procedures of collective dismissal, over normative aspects related to fixed term contracts. Finally, it is establish the little relation between flexibility levels and results in terms of economic development, putting into question the assertions that try to extrapolate strategies of flexibilization like isolated measurement to facilitate the economic progress of a country.

  1. Traitement d'un problème de type FJSP (Flexible Job Shop ...

    AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES... for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · Journal Quality.

  2. A review on meta-heuristic approaches to solving flexible job shop scheduling problem

    Kaya, Serkan; Fığlalı, Nilgün

    2016-01-01

    Gerçek yaşam uygulamaları arasında yer alan esnek atölye tipi çizelgeleme (EATÇ) problemleri, klasik atölye tipi çizelgeleme (ATÇ) probleminin genişletilmiş halidir. ATÇ problemlerinde paralel makineler yoktur. Atölyede işlerin paralel makinelerde işlenmesi söz konusu olduğunda EATÇ problemi ortaya çıkar. EATÇ problemlerinde işlerin rotaları birbirinden farklıdır ve her iş en az bir operasyondan oluşmaktadır. Bu operasyonlar, birbirine paralel makine setlerinden herhangi birinde işlem görürle...

  3. Temporal and locational flexibility of work, working-time fit, and job satisfaction

    Possenriede, D.S.; Plantenga, J.

    2014-01-01

    This study analyses the effects of arrangements that provide temporal and locational flexibility of work (TLF), namely flexi-time, telehomework, and part-time work, on employees' satisfaction with the fit between working time and private life and their overall job satisfaction. TLF arrangements

  4. A Local and Global Search Combine Particle Swarm Optimization Algorithm for Job-Shop Scheduling to Minimize Makespan

    Zhigang Lian

    2010-01-01

    Full Text Available The Job-shop scheduling problem (JSSP is a branch of production scheduling, which is among the hardest combinatorial optimization problems. Many different approaches have been applied to optimize JSSP, but for some JSSP even with moderate size cannot be solved to guarantee optimality. The original particle swarm optimization algorithm (OPSOA, generally, is used to solve continuous problems, and rarely to optimize discrete problems such as JSSP. In OPSOA, through research I find that it has a tendency to get stuck in a near optimal solution especially for middle and large size problems. The local and global search combine particle swarm optimization algorithm (LGSCPSOA is used to solve JSSP, where particle-updating mechanism benefits from the searching experience of one particle itself, the best of all particles in the swarm, and the best of particles in neighborhood population. The new coding method is used in LGSCPSOA to optimize JSSP, and it gets all sequences are feasible solutions. Three representative instances are made computational experiment, and simulation shows that the LGSCPSOA is efficacious for JSSP to minimize makespan.

  5. Access to flexible work arrangements, working-time fit and job satisfaction

    D.S. Possenriede; J. Plantenga

    2011-01-01

    This article analyses the effects of access to flexible work arrangements, namely flexi-time, telehomework and part-time work, on employees’ satisfaction with the fit between paid work and private life and their overall job satisfaction. Having access to flexible work arrangements gives employees more control over their working life and thereby improves on the match between paid work and private life. Based on unique cross-sectional survey data collected among more than 20.000 Dutch public ...

  6. Regras de prioridade eficientes que exploram características do Job Shop Flexível para a minimização do atraso total

    Everton Luiz de Melo

    2015-03-01

    Full Text Available Este trabalho aborda o ambiente de produção Job Shop Flexível (JSF, extensão do problema NP-Difícil Job Shop. O JSF envolve um conjunto de jobs compostos por operações e cada operação deve ser processada em uma das máquinas habilitadas. O critério considerado é a minimização do atraso total. Inicialmente são identificadas características relacionadas à flexibilidade do sistema de produção, mais especificamente às máquinas habilitadas por operação e aos seus tempos de processamento. A seguir são propostas novas regras que exploram tais características e que são capazes de antever estados futuros do sistema. São realizados experimentos computacionais com 600 instâncias. Comparações com regras da literatura mostram que a melhor heurística proposta supera a melhor regra conhecida em 81% das instâncias.

  7. Supporting shop floor intelligence

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  8. For Better or for Worse? An Analysis of how Flexible Working Practices Influence Employees' Perceptions of Job Quality

    Kelliher, Clare; Anderson, Deirdre

    2008-01-01

    This paper is concerned with examining the relationship between flexible working practices and employee perceptions of job quality. In recent years a growing number of employers in the UK have introduced flexible working options for employees in response to increasing concerns over work-life balance and the desire to be seen as an ‘employer of choice’. At the same time there has been considerable policy debate amongst the European Union (EU) over job quality and the need to ...

  9. The Implications of Flexible Staffing Arrangements for Job Stability. Upjohn Institute Staff Working Paper No. 99-056. Revised.

    Houseman, Susan N.; Polivka, Anne E.

    A study examined the job stability of workers in the following flexible staffing arrangements: agency temporary, direct-hire temporary, on-call, contract company, independent contractor, and regular part-time work. Two data sources were used in the analysis. The first was a nationwide survey of employers on their use of flexible staffing…

  10. Concurrent validation of a neurocognitive assessment protocol for clients with mental illness in job matching as shop sales in supported employment.

    Ng, S S W; Lak, D C C; Lee, S C K; Ng, P P K

    2015-03-01

    Occupational therapists play a major role in the assessment and referral of clients with severe mental illness for supported employment. Nonetheless, there is scarce literature about the content and predictive validity of the process. In addition, the criteria of successful job matching have not been analysed and job supervisors have relied on experience rather than objective standards in recruitment. This study aimed to explore the profile of successful clients working in 'shop sales' in a supportive environment using a neurocognitive assessment protocol, and to validate the protocol against 'internal standards' of the job supervisors. This was a concurrent validation study of criterion-related scales for a single job type. The subjective ratings from the supervisors were concurrently validated against the results of neurocognitive assessment of intellectual function and work-related cognitive behaviour. A regression model was established for clients who succeeded and failed in employment using supervisor's ratings and a cutoff value of 10.5 for the Performance Fitness Rating Scale (R(2) = 0.918, F[41] = 3.794, p = 0.003). Classification And Regression Tree was also plotted to identify the profile of cases, with an overall accuracy of 0.861 (relative error, 0.26). Use of both inference statistics and data mining techniques enables the decision tree of neurocognitive assessments to be more readily applied by therapists in vocational rehabilitation, and thus directly improve the efficiency and efficacy of the process.

  11. Psychological Flexibility as a Moderator of the Relationships between Job Demands and Resources and Occupational Well-being.

    Novaes, Vladimir Pinto; Ferreira, Maria Cristina; Valentini, Felipe

    2018-05-15

    The aim of this study was to identify the relations of job demands (work overload) and job resources (social support and autonomy) with subjective job well-being (job satisfaction, positive affects, negative affects), as well as the moderating role of personal resources (psychological flexibility at work) in such relationships. The sample consisted of 4,867 Brazilian workers, of both sexes, with ages ranging from 18 to 67 years. Structural equation modelling showed that the work overload was negatively associated with job satisfaction (β = -.06; p autonomy was positively associated with satisfaction (β = .08; p autonomy with positive affects (β = -.06; p job demands-resources theory, especially with respect to the relevance of personal resources for the promotion of occupational well-being.

  12. Jobs

    Schubart, Rikke

    2013-01-01

    Review of the movie Jobs (Joshua Michael Stern, 2013), a drama about Steve Jobs, the founder of Apple.......Review of the movie Jobs (Joshua Michael Stern, 2013), a drama about Steve Jobs, the founder of Apple....

  13. Flexible work arrangements, job satisfaction, and turnover intentions: the mediating role of work-to-family enrichment.

    McNall, Laurel A; Masuda, Aline D; Nicklin, Jessica M

    2010-01-01

    The authors examined the relation between the availability of 2 popular types of flexible work arrangements (i.e., flextime and compressed workweek) and work-to-family enrichment and, in turn, the relation between work-to-family enrichment and (a) job satisfaction and (b) turnover intentions. In a sample of 220 employed working adults, hierarchical regression analyses showed that work-to-family enrichment mediated the relation between flexible work arrangements and both job satisfaction and turnover intentions, even after controlling for gender, age, marital status, education, number of children, and hours worked. Thus, the availability of flexible work arrangements such as flextime and compressed workweek seems to help employees experience greater enrichment from work to home, which, in turn, is associated with higher job satisfaction and lower turnover intentions. The authors discuss the implications for research and practice.

  14. Approximation algorithms for the parallel flow shop problem

    X. Zhang (Xiandong); S.L. van de Velde (Steef)

    2012-01-01

    textabstractWe consider the NP-hard problem of scheduling n jobs in m two-stage parallel flow shops so as to minimize the makespan. This problem decomposes into two subproblems: assigning the jobs to parallel flow shops; and scheduling the jobs assigned to the same flow shop by use of Johnson's

  15. Handbook for Trade and Industrial Shop Teachers.

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

  16. Science Shops

    Jørgensen, Michael Søgaard

    1999-01-01

    The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented.......The paper prsents the overall concept of science shops as practised in most of the European science shops and present the concept practised and some experience obtained at the Technical University of Denmark. An outline for the planning of new sceince shops is presented....

  17. Flexible Graduate is Successful Graduate. Key Factors of Successful Job Interview, Results of a Comparative Analysis

    Vendolska Iva

    2016-06-01

    Full Text Available The conditions on the labour market have changed dramatically in the last twenty years and the importance of human resources has increased. A company has to find, keep, and educate those workers who are able to adapt quickly to changes in the market. Such a company is then able to innovate constantly, which ensures its long-term competitiveness. Moreover, after finishing their education young people experience problems when seeking suitable employment. University graduates face stronger competition from other graduates when seeking employment. This target risk group of university graduates in particular is included in the primary research, together with the other side of the labour market, employers. The importance of individual criteria that are pivotal for employers during job interviews was examined on the basis of an anonymous questionnaire. 18 criteria were assessed and compared on a scale from 1 to 5. The correlation between the rate of importance of the given criterion and the group of respondents was tested. It was discovered that the criterion employers consider the most important is the flexibility and adaptability of a job candidate. This criterion is followed by willingness to learn, loyalty, and self-reliance. Those considered least important were these criteria: a stay abroad, courses/certificates, and studying at a particular university. On the other hand, the students consider the most important criteria to be foreign language skills, followed by communication skills, and willingness to learn and an internship during their studies. The criteria that were seen as the most important were: self-confidence, experience of a stay abroad, and the particular university that the student graduated from. The most significant difference in the assessment of the criteria between the employers and students was identified as being an internship during one’s studies.

  18. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    Gregorius Satia Budhi

    2003-01-01

    Flexible Manufacturing System (FMS) is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC) approach was used as the weight to search the operation route in the proper machine, so that the total production cost ...

  19. A synergetic combination of small and large neighborhood schemes in developing an effective procedure for solving the job shop scheduling problem.

    Amirghasemi, Mehrdad; Zamani, Reza

    2014-01-01

    This paper presents an effective procedure for solving the job shop problem. Synergistically combining small and large neighborhood schemes, the procedure consists of four components, namely (i) a construction method for generating semi-active schedules by a forward-backward mechanism, (ii) a local search for manipulating a small neighborhood structure guided by a tabu list, (iii) a feedback-based mechanism for perturbing the solutions generated, and (iv) a very large-neighborhood local search guided by a forward-backward shifting bottleneck method. The combination of shifting bottleneck mechanism and tabu list is used as a means of the manipulation of neighborhood structures, and the perturbation mechanism employed diversifies the search. A feedback mechanism, called repeat-check, detects consequent repeats and ignites a perturbation when the total number of consecutive repeats for two identical makespan values reaches a given threshold. The results of extensive computational experiments on the benchmark instances indicate that the combination of these four components is synergetic, in the sense that they collectively make the procedure fast and robust.

  20. Flexibility.

    Humphrey, L. Dennis

    1981-01-01

    Flexibility is an important aspect of all sports and recreational activities. Flexibility can be developed and maintained by stretching exercises. Exercises designed to develop flexibility in ankle joints, knees, hips, and the lower back are presented. (JN)

  1. Activity-based Costing dan Simulated Annealing untuk Pencarian Rute pada Flexible Manufacturing Systems

    Budhi, Gregorius Satia

    2003-01-01

    In Bahasa Indonesia : Flexible Manufacturing System (FMS) adalah sistem manufaktur yang tersusun dari mesin-mesin Numerical Control (NC) yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin-mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC) digunakan sebagai bobot / weight dalam pencarian ru...

  2. ANALISIS ACTIVITY BASED COST1NG DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    Rialdy, Novien

    2017-01-01

    AbstrakFlexible Manufacturing System (FMS) adalah sistem manufaktur yang tersusun dari mesin -mesin Numerical Control (NC) yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin -mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC) digunakan sebagai bobot / weight dalam pencarian rute operasi pada mesin...

  3. Flexible employment, precarious employees? Job-, employer- and institutional explanations for numerical flexibility, and its relation to precarious employment

    Olsthoorn, M.

    2015-01-01

    This dissertation presents a study of numerical flexibility and its relation to precarious employment in contemporary labour markets. Precarious employment is defined as the situation in which an employee has both insecure employment and insecure finances. More specifically, precarious employees are

  4. Flexible Work Hours and Other Job Factors in Parental Time with Children

    Baxter, Jennifer

    2011-01-01

    Flexible working hours are typically seen to be advantageous to working parents, as the flexible hours more easily allow responsibilities of care and employment be balanced. But do flexible work hours actually mean that parents can spend more time with their children? This article explores this for parents of young children in Australia. The…

  5. METODOLOGÍA BASADA EN LOS ALGORITMOS VEGA Y MOGA PARA SOLUCIONAR UN PROBLEMA MULTIOBJETIVO EN UN SISTEMA DE PRODUCCIÓN JOB SHOP

    Germán Augusto Coca Ortegón

    Full Text Available En este artículo se presenta una metodología que pretende minimizar de forma simultánea, en un ambiente de producción tipo "job shop" correspondiente a una empresa metalmecánica, las siguientes variables: tiempo de proceso, costo de mano de obra directa y, asimismo la fracción defectuosa generada por la fatiga del operario. Con este propósito se fusionan elementos de los algoritmos genéticos Vega y Moga, desarrollando para el efecto las siguientes etapas: generar la población inicial, conformar la nueva población, realizar análisis de varianza y por último, comparar con un método híbrido entre sumas ponderadas y algoritmos genéticos. De acuerdo con lo anterior, al evaluar el individuo de menor tiempo de proceso proveniente de la metodología basada en los algoritmos Vega y Moga, respecto al individuo de menor tiempo de desarrollo proveniente del método híbrido entre sumas ponderadas y algoritmos genéticos, se encuentra que el primero supera en desempeño al segundo así: en cuanto a la variable tiempo de proceso (en horas en 27,86%; en cuanto a la variable tiempo de proceso (en semanas en 1,25%; en cuanto a la variable costo de mano de obra directa (MOD en 6,73% y, en cuanto a la variable fracción defectuosa en 25,85%.

  6. Nonstandard Work, Substandard Jobs. Flexible Work Arrangements in the U.S.

    Kalleberg, Arne L.; Rasell, Edith; Cassirer, Naomi; Reskin, Barbara F.; Hudson, Ken; Webster, David; Appelbaum, Eileen; Spalter-Roth, Roberta M.

    Nonstandard work arrangements (independent contracting, working for a temporary help agency, contract or on-call work, day labor, self-employment, and regular part-time employment) are growing more common in the United States. In 1995, more than 29 percent of all jobs were in nonstandard work arrangements. A study of these jobs and the…

  7. Spatial flexibility in job mobility: macro-level opportunities and micro-level restrictions

    Ham, M. van; Mulder, C.H.; Hooimeijer, P.

    2001-01-01

    Disequilibria among regional labour markets persist through spatial inflexibility in job mobility resulting from restrictions in migration and long-distance commuting. This contribution analyses workplace mobilityöthe acceptance of a job at a great distance from the place of resi- denceöusing a

  8. FLOW-SHOP SCHEDULING WITH MULTIPLE OPERATIONS AND TIME LAGS

    RIEZEBOS, J; GAALMAN, GJC; GUPTA, JND

    A scheduling system is proposed and developed for a special type of flow shop. Ln this flow shop there is one machine at each stage. A job may require multiple operations at each stage. The first operation of a job on stage j cannot start until the last operation of the job on stage j - 1 has

  9. Internet Shopping

    刘洪毓

    2004-01-01

    Nowadays you no longer need to walk round hundreds of shops looking for the items you need. You can shop for just about anything from your armchair. All you need is a computer and access(进入) to the Internet.

  10. Class advantage and the gender divide: flexibility on the job and at home.

    Gerstel, Naomi; Clawson, Dan

    2014-09-01

    Using a survey, interviews, and observations, the authors examine inequality in temporal flexibility at home and at work. They focus on four occupations to show that class advantage is deployed in the service of gendered notions of temporal flexibility while class disadvantage makes it difficult to obtain such flexibility. The class advantage of female nurses and male doctors enables them to obtain flexibility in their work hours; they use that flexibility in gendered ways: nurses to prioritize family and physicians to prioritize careers. Female nursing assistants and male emergency medical technicians can obtain little employee-based flexibility and, as a result, have more difficulty meeting conventional gendered expectations. Advantaged occupations "do gender" in conventional ways while disadvantaged occupations "undo gender." These processes operate through organizational rules and cultural schemas that sustain one another but may undermine the gender and class neutrality of family-friendly policies.

  11. The Impact of Hours Flexibility on Career Employment, Bridge Jobs, and the Timing of Retirement

    Kevin E. Cahill; Michael D. Giandrea; Joseph F. Quinn

    2014-01-01

    To what extent does hours flexibility in career employment impact the retirement process? Workplace flexibility policies have the potential to improve both the welfare of employees and the business outcomes of employers. These policies, and hours flexibility in particular for older Americans, have also been touted as a way to reduce turnover. For older Americans, reductions in turnover could mean more years in career employment, fewer years in bridge employment, and little or no impact on the...

  12. Labour Market Flexibility between Risk and Opportunity for Gender Equality Analyses of Self-employment, Part-time Work, and Job Autonomy

    König, Stefanie

    2016-01-01

    The dissertation “Labour Market Flexibility between Risk and Opportunity for Gender Equality – Analyses of Self-employment, Part-time Work, and Job Autonomy” addresses the main research question: Is flexibility the key to a less gendered labour market, or does it rather foster more traditional roles and gender inequality? In four empirical studies, different aspects in life were investigated in order to gain a holistic understanding of gender inequalities related to flexibility at work: the d...

  13. Flexible working times : effects on employees' exhaustion, work-nonwork conflict and job performance

    Kattenbach, R.; Demerouti, E.; Nachreiner, F.

    2010-01-01

    Purpose - The aim of this study is to provide a useful conceptualization of flexible working times and to examine the relationships between flexible working times and employees' well-being and peer ratings of performance. It is supposed that an employee's "time-autonomy" would be positively related

  14. Approximate models of job shops

    Diamantidis, Alexandros

    1999-01-01

    Scheduling can be described as “the allocation of scarce resources over time to perform a collection of tasks”. They arise in many practical applications in manufacturing, marketing, service industries and within the operating systems of computers. Scheduling problems are frequently encountered in various activities of every day life. They exist whenever there is a choice o f the order in which a number of tasks can be performed Some examples are scheduling of classes in academic inst...

  15. Flexible Working in BT: An investigation into Motivation, Productivity and Job Satisfaction

    Harford, Anthony David

    2006-01-01

    British Telecommunications plc (BT) began introducing flexible working initiatives in the early 1990s. The uptake across the company has been varied as many individual and contextual factors have influenced the employee when deciding upon how and where to work. Much of the research on the matter appears to only assess impact and analysis up to 2002, and although internal surveys ( CARE ) have included question sets on flexible working little or no primary research has been undertaken specific...

  16. Shopping Malls - ShoppingCenters

    NSGIC Local Govt | GIS Inventory — Collected from a variety of sources both commercial and internal, this layer represents shopping center locations within Volusia County and is maintained by the...

  17. Minimizing total weighted completion time in a proportionate flow shop

    Shakhlevich, N.V.; Hoogeveen, J.A.; Pinedo, M.L.

    1998-01-01

    We study the special case of the m machine flow shop problem in which the processing time of each operation of job j is equal to pj; this variant of the flow shop problem is known as the proportionate flow shop problem. We show that for any number of machines and for any regular performance

  18. English in the Garment Shops.

    Verplaetse, Lorrie

    This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

  19. Um modelo de projeto de layout para ambientes job shop com alta variedade de peças baseado nos conceitos da produção enxuta A layout design model for job shop environments with high variety of parts based on lean production concepts

    Alessandro Lucas da Silva

    2012-01-01

    Full Text Available Segundo Canem e Williamson (1998, o planejamento do layout é importante, pois normalmente representa os maiores e mais caros recursos da organização. Além disso, a localização e disposição física dos equipamentos no chão de fábrica têm impacto em diversos fatores como nível de estoque em processo, tamanho dos lotes de transferência, dificuldade no gerenciamento das atividades, movimentação de pessoas e produtos, entre outros. Portanto, o estudo de conceitos de arranjo físico e o desenvolvimento de modelos de projeto do layout, que visem a otimização dos recursos de produção, são de vital importância na busca pela melhoria dos sistemas produtivos. Neste contexto, este artigo apresenta um novo modelo de projeto de layout, para ambientes job shop com ampla variedade de peças. O modelo foi desenvolvido durante uma pesquisa de doutorado e foi aplicado em algumas empresas do setor metal mecânico. Os resultados obtidos comprovaram a eficiência do modelo projetado. O objetivo do modelo consiste em conduzir a equipe de projeto de layout a desenvolver alternativas de arranjo físico que estejam em consonância com conceitos e princípios da filosofia de produção enxuta. Vale ressaltar novamente que o modelo foi desenvolvido para ambientes com alta variedade de peças, ambientes esses em que, devido à dificuldade em se projetar o arranjo físico, as empresas terminam por adotar o layout funcional, conceito esse de arranjo físico que apresenta sérios problemas como excesso de transporte, altos níveis de estoques em processo, etc.According to Canem and Williamson (1998, layout planning is important because it usually represents the largest and most expensive resources for an organization. Moreover, the equipment location on the factory floor has an impact on several factors such as level of in-process inventory, transfer batch sizes, difficulty in managing activities, and moving people and products, among others. Therefore

  20. Procedural Optimization Models for Multiobjective Flexible JSSP

    Elena Simona NICOARA

    2013-01-01

    Full Text Available The most challenging issues related to manufacturing efficiency occur if the jobs to be sched-uled are structurally different, if these jobs allow flexible routings on the equipments and mul-tiple objectives are required. This framework, called Multi-objective Flexible Job Shop Scheduling Problems (MOFJSSP, applicable to many real processes, has been less reported in the literature than the JSSP framework, which has been extensively formalized, modeled and analyzed from many perspectives. The MOFJSSP lie, as many other NP-hard problems, in a tedious place where the vast optimization theory meets the real world context. The paper brings to discussion the most optimization models suited to MOFJSSP and analyzes in detail the genetic algorithms and agent-based models as the most appropriate procedural models.

  1. Flexibility in change practices and job outcomes for nurses: exploring the role of subjective fit.

    Newton, Cameron; Teo, Stephen T T; Pick, David; Yeung, Melissa; Salamonson, Yenna

    2013-12-01

    To integrate existing theoretical perspectives on change management, subjective fit and occupational stress to better understand the effects of change on employee adjustment. Although subjective fit with organizational goals and objectives has been shown to have positive effects on employee adjustment, its role in the organizational change-occupational stress context is not understood. This represents a caveat in research when considering the notion that those who feel that they fit with the organization's goals may be better equipped to reconcile and deal with change. A cross-sectional survey of nurses from public and non-profit sector hospitals was conducted. Data were collected from 252 public and non-profit sector nurses via online surveys. Data were collected from June-October in 2010. Structural equation modelling was used to test the direct and indirect effects among the focal variables. The results showed that public and non-profit nurses experience flexibility-limiting and flexibility-promoting change initiatives and that these are differentially related to the perception of administrative stressors and adjustment with these relationships directly and indirectly influenced by perceptions of subjective fit. Flexibility-limiting change initiatives led to lower levels of subjective fit, higher levels of administrative stressors and less favourable adjustment. On the other hand, flexibility-promoting change practices led to higher levels of subjective fit, lower levels of administrative stressors and ultimately better adjustment. The results further the theoretical understanding of the role of subjective fit in organizational change and occupational stress theories. © 2013 John Wiley & Sons Ltd.

  2. Machine shop basics

    Miller, Rex

    2004-01-01

    Use the right tool the right wayHere, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job.Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, T

  3. Tendências de aplicações da otimização por colônia de formigas na progamação de JOB-SHOPS

    Felipe Fonseca Tavares de Freitas

    2009-11-01

    Full Text Available A programação da produção revela-se como uma atividade que, se bem planejada, otimizada e controlada, gera grandes vantagens competitivas e duradouras para a empresa. Um dos problemas mais complexos de programação da produção ocorre em sistemas do tipo job-shop – os quais envolvem otimização combinatória, cuja resolução em tempo computacional aceitável é quase sempre improvável (NP-hard. Neste contexto, vários métodos de otimização têm sido pesquisados e desenvolvidos nas últimas décadas, almejando-se planos de produção cada vez melhores, sob tempos de execução computacional gradativamente menores e viáveis para a indústria. Em especial, destaca-se o uso das técnicas de inteligência coletiva que, mimetizando fenômenos biológicos e sociais da natureza, vêm obtendo bons resultados quando aplicadas a problemas do tipo job shop scheduling (JSS. Revisando-se a teoria referente à meta-heurística de Otimização por Colônia de Formigas (ou Ant Colony Optimization - ACO e suas aplicações em problemas de JSS, este artigo identifica e explica as principais tendências de pesquisa nessa área, tanto a nível mundial quanto nacional. Como resultados deste estudo, pode-se vislumbrar a hibridização entre ACO e outros algoritmos de otimização e o tratamento de cenários de JSS cada vez mais complexos como as tendências mais relevantes dos trabalhos envolvendo ACO e problemas de programação de job-shops.

  4. Análise de problemas de partição de instalações em sistemas job-shops por meio de modelos de redes de filas

    Silva,Claudio Rogerio Negri da; Morabito,Reinaldo

    2007-01-01

    Este artigo estuda o problema de projeto de fábrica focalizada envolvendo a partição da instalação (planta) em subplantas e a alocação de capacidade em cada estação de trabalho das subplantas. O sistema de manufatura job-shop é representado por meio de uma rede de filas aberta genérica, e aproximações baseadas em métodos de decomposição são utilizadas para avaliar e otimizar o desempenho do sistema. O objetivo é reduzir a complexidade do sistema do ponto de vista da gestão do produto ou da ge...

  5. Aplicação de modelos de redes de filas abertas no planejamento do sistema job-shop de uma planta metal-mecânica Application of open queueing network models for planning a job-shop system of an actual metallurgical plant

    Cláudio Rogério Negri da Silva

    2007-01-01

    Full Text Available Este artigo ilustra a aplicação de modelos de redes de filas abertas para auxiliar no processo de tomada de decisões de projeto (ou reprojeto e planejamento de sistemas discretos de manufatura. Utilizam-se métodos aproximados de decomposição paramétrica, para avaliar as medidas de desempenho da rede. Por meio de um estudo de caso de uma rede job-shop de uma fábrica metal-mecânica, mostra-se que estes métodos são adequados e efetivos para estimar, por exemplo, os estoques em processo (WIP e os leadtimes de produção dos produtos. Mostra-se ainda que modelos de programação matemática de alocação de capacidade nas estações da rede, baseados nos métodos de decomposição, também são efetivos para otimizar o desempenho da rede em diferentes configurações. Curvas de trade-off entre investimento em capacidade e WIP ou leadtime são geradas e são úteis para auxiliar um gerente a decidir quanto alocar de capacidade na rede para atingir metas de desempenho. Estas curvas também são úteis para analisar o efeito em termos de capacidade se a variabilidade das chegadas externas de produtos, no mix de produtos ou na taxa de produção da rede muda.This paper shows the application of open queueing network models to support the design (or redesign decision making and planning of manufacturing systems. Approximate decomposition methods are used in order to evaluate the queueing network performance. From an actual metallurgical industry queueing network, it is shown that these methods are suitable and effective to estimate, for instance, the work-in-process (WIP and the production leadtime. It is also shown that optimization models to allocate capacity at network stations, based on decomposition methods, are effective in optimizing the performance of the network under different configurations. Trade-off curves between capacity investment and WIP or leadtime are generated and are useful in supporting a manager to estimate how much

  6. Window shopping

    Oz Shy

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  7. Job crafting

    Demerouti, E.; Bakker, A.B.; Peeters, M.; Jonge, de J.; Taris, T.

    2014-01-01

    The increasing popularity of self-managing teams, re-engineering and other organizational innovations, coupled with the increased flexibility in work arrangements made possible by advances in information technology, has considerably expanded the complexity of professional jobs. Consequently, each

  8. Análise de problemas de partição de instalações em sistemas job-shops por meio de modelos de redes de filas

    Claudio Rogerio Negri da Silva

    2007-08-01

    Full Text Available Este artigo estuda o problema de projeto de fábrica focalizada envolvendo a partição da instalação (planta em subplantas e a alocação de capacidade em cada estação de trabalho das subplantas. O sistema de manufatura job-shop é representado por meio de uma rede de filas aberta genérica, e aproximações baseadas em métodos de decomposição são utilizadas para avaliar e otimizar o desempenho do sistema. O objetivo é reduzir a complexidade do sistema do ponto de vista da gestão do produto ou da gestão da estação, por exemplo, limitando-se a variância dos leadtimes dos produtos na rede. Apresenta-se um modelo de programação não-linear inteira para o problema e um algoritmo heurístico para resolvê-lo. Aplicando-se o algoritmo em alguns problemas testes, mostra-se que a partição da instalação em subplantas pode reduzir a variância dos leadtimes dos produtos na rede, sem necessidade de investimentos adicionais em capacidade. Além disso, algumas vezes é possível manter (ou até melhorar o desempenho da rede, particionando-a em subplantas que necessitam de menos capacidade do que a configuração original da rede como uma planta única.This paper studies the focused factory design involving the partition of the facility (plant into sub-plants and the allocation of capacity in each workstation of the sub-plants. The job-shop system is represented by a generic open queuing network and approximations based on decomposition methods are used to evaluate and optimize the performance of the system. The aim is to reduce the system complexity from the point of view of the product or workstation management, for example, limiting the variance of the product leadtimes in the network. An integer non-linear programming model and a heuristic algorithm are presented. Applying the algorithm to some testing problems, it is shown that the partition of the facility into sub-plants can reduce the variance of the product leadtimes without

  9. Omni channel fashion shopping

    Kemperman, A.D.A.M.; van Delft, L.; Borgers, A.W.J.; Pantano, E.

    2015-01-01

    This chapter gives insight into consumers' online and offline fashion shopping behavior, consumers' omni-channel usage during the shopping process, and consumer fashion shopper segments. Based on a literature review, omni-channel shopping behavior during the shopping process was operationalized.

  10. Future Shop: A Model Career Placement & Transition Laboratory.

    Floyd, Deborah L.; And Others

    During 1988-89, the Collin County Community College District (CCCCD) conducted a project to develop, implement, and evaluate a model career laboratory called a "Future Shop." The laboratory was designed to let users explore diverse career options, job placement opportunities, and transfer resources. The Future Shop lab had three major components:…

  11. Designing an advanced available-to-promise mechanism compatible with the make-to-forecast production systems through integrating inventory allocation and job shop scheduling with due dates and weighted earliness/tardiness cost

    Masoud Rabbani

    2016-06-01

    Full Text Available In the competitive business world, applying a reliable and powerful mechanism to support decision makers in manufacturing companies and helping them save time by considering varieties of effective factors is an inevitable issue. Advanced Available-to-Promise is a perfect tool to design and perform such a mechanism. In this study, this mechanism which is compatible with the Make-to-Forecast production systems is presented. The ability to distinguish between batch mode and real-time mode advanced available-to-promise is one of the unique superiorities of the proposed model. We also try to strengthen this mechanism by integrating the inventory allocation and job shop scheduling by considering due dates and weighted earliness/tardiness cost that leads to more precise decisions. A mixed integer programming (MIP model and a heuristic algorithm according to its disability to solve large size problems are presented. The designed experiments and the obtained results have proved the efficiency of the proposed heuristic method.

  12. From flexibility human resource management to employee engagement and perceived job performance across the lifespan: A multisample study

    Bal, P.M.; Lange, A.H. de

    2015-01-01

    This study investigated the effects of flexibility human resource management (HRM) on employee outcomes over time, as well as the role of age in these relations. Based on work adjustment theory and AMO theory, it was predicted that availability and use of flexibility HRM would be positively related

  13. Algoritmo genético para reducir el makespan en un flow shop híbrido flexible con máquinas paralelas no relacionadas y tiempos de alistamiento dependientes de la secuencia

    Juan Camilo López-Vargas

    2015-01-01

    Full Text Available El artículo propone el algoritmo genético simple o estándar (AGS como enfoque de solución al problema de programación de produc - ción para un ambiente tipo flow shop híbrido flexible minimizando el makespan. La codificación del algoritmo propuesto permite obtener resultados con tiempos de cómputo bastante razonables y con un nivel de convergencia del makespan cercano al 2%, con mejores solu - ciones que un algoritmo alternativo diseñado para el mismo caso de programación de producción. A partir de los resultados obtenidos en el proceso de experimentación y del posterior análisis comparativo, se concluye que a partir del modelamiento más completo de las condiciones reales de producción, el algoritmo genético ejecuta la programación de producción reduciendo el tiempo máximo de procesamiento, o makespan. En futuros trabajos, el enfoque de investigación será la búsqueda de más escenarios alternativos de producción, con el fin de incrementar la aplicación de este tipo de herramientas y generar impacto en los entornos empresariales reales.

  14. Flow-shop scheduling problem under uncertainties: Review and trends

    Eliana María González-Neira

    2017-03-01

    Full Text Available Among the different tasks in production logistics, job scheduling is one of the most important at the operational decision-making level to enable organizations to achieve competiveness. Scheduling consists in the allocation of limited resources to activities over time in order to achieve one or more optimization objectives. Flow-shop (FS scheduling problems encompass the sequencing processes in environments in which the activities or operations are performed in a serial flow. This type of configuration includes assembly lines and the chemical, electronic, food, and metallurgical industries, among others. Scheduling has been mostly investigated for the deterministic cases, in which all parameters are known in advance and do not vary over time. Nevertheless, in real-world situations, events are frequently subject to uncertainties that can affect the decision-making process. Thus, it is important to study scheduling and sequencing activities under uncertainties since they can cause infeasibilities and disturbances. The purpose of this paper is to provide a general overview of the FS scheduling problem under uncertainties and its role in production logistics and to draw up opportunities for further research. To this end, 100 papers about FS and flexible flow-shop scheduling problems published from 2001 to October 2016 were analyzed and classified. Trends in the reviewed literature are presented and finally some research opportunities in the field are proposed.

  15. Work demands, job insecurity and sickness absence from work. how productive is the new, flexible labour force?

    D'Souza, Rennie M; Strazdins, Lyndall; Broom, Dorothy H; Rodgers, Bryan; Berry, Helen L

    2006-06-01

    We investigate one aspect of productivity--sickness absence--and ask whether job insecurity and high work demands are associated with increased sickness absence and, if so, whether mental or physical health mediates this association. We further investigate if having control at work modifies these associations. We used cross-sectional survey data from 2,248 employees aged 40-44 years living in two cities of south-eastern Australia. Logistic regressions were used to compare the associations between job insecurity and demands among those with short (1-3 days) or long-term (> 3 days) sickness absence with those who had no sickness absence in the last four weeks. The mediating effects of mental and physical health were assessed by evaluating changes in the magnitude of the association between these work conditions and sickness absence. High job insecurity (OR = 3.28; 95% CI 1.54-6.95) and high work demands (OR = 1.62; 95% CI 1.13-2.30) were significantly associated with long-term, but not with short-term, sickness absence. These associations were unaffected by job control. Depression and anxiety explained 61% of the association between high work demands and long-term sickness absence and 30% of the association between job insecurity and long-term sickness absence. Difficult working conditions may reduce productivity by contributing to longer absences from work. Reforms intended to improve economic performance should address any potential health costs of insecurity or intensification, which could inadvertently decrease productivity, possibly through their impact on mental health.

  16. Jobs, Jobs, Jobs!

    Jacobson, Linda

    2011-01-01

    Teaching is not the safe career bet that it once was. The thinking used to be: New students will always be entering the public schools, and older teachers will always be retiring, so new teachers will always be needed. But teaching jobs aren't secure enough to stand up to the "Great Recession," as this drawn-out downturn has been called. Across…

  17. Aportación de los sistemas de identificación automática a los entornos de fabricación Job-Shop : aplicación práctica en empresas de la construcción naval

    Eguizabal Gandara, Luis Eduardo

    2015-01-01

    Esta tesis tiene por objeto el desarrollo de nuevas herramientas tecnológicas, para la mejora de los procesos de producción en talleres con configuración Job Shop. Este tipo de configuración se caracteriza por tener una fabricación intermitente, que en general, tiene peores rendimientos que la fabricación continua. Sin embargo, su gran ventaja es la versatilidad, que permite la fabricación de gran variedad de artículos y en series pequeñas. Es por ello, que es elegida por muchas empresas, com...

  18. Online Shopping Behavior

    Shahzad, Hashim

    2015-01-01

    Online shopping is a very much developed phenomena in Scandinavian countries. Different online factors impact online consumers’ behavior differently depending on the environment of different regions. Sweden is one of the developed and technologically advanced countries. To see the impact of different factors on consumers’ online shopping behavior, the purpose of this study is to analyse the factors that influence consumers’ online shopping behavior in Sweden’s context. One of the objectives o...

  19. Power Service Shops

    Federal Laboratory Consortium — TVA's Power Service Shops provides expert repair and maintenance of power system components and large industrial equipment. With world-class maintenance facilities...

  20. Technicians and Shop Owners

    Overview page provides information for shops and technicians that repair or service motor vehicle air-conditioning systems, including information on proper training, approved equipment, and regulatory practices.

  1. The Relationship between Managerial Satisfaction and Job Turnover Intention: The Mediating Role of Job Satisfaction

    Rüveyda Öztürk Basol

    2017-09-01

    Full Text Available The growth of service sector in Turkey occurs faster than the other sectors and the number of shopping malls increases correspondingly. The rapid growth of the number of shopping malls has necessitated the measurement of the attitudes of the employees in this sector. This study demonstrated that the gender, marital status and age were not the significant variables on job satisfaction, managerial satisfaction and job turnover intention; however, education status and income status were found to be significant variables on job satisfaction and job turnover intention. In addition, job satisfaction fully mediated the relationship between managerial satisfaction and job turnover intention.

  2. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  3. Machine Shop Lathes.

    Dunn, James

    This guide, the second in a series of five machine shop curriculum manuals, was designed for use in machine shop courses in Oklahoma. The purpose of the manual is to equip students with basic knowledge and skills that will enable them to enter the machine trade at the machine-operator level. The curriculum is designed so that it can be used in…

  4. ACTIVITY-BASED COSTING DAN SIMULATED ANNEALING UNTUK PENCARIAN RUTE PADA FLEXIBLE MANUFACTURING SYSTEMS

    Gregorius Satia Budhi

    2003-01-01

    Full Text Available Flexible Manufacturing System (FMS is a manufacturing system that is formed from several Numerical Controlled Machines combine with material handling system, so that different jobs can be worked by different machines sequences. FMS combine the high productivity and flexibility of Transfer Line and Job Shop manufacturing system. In this reasearch, Activity-Based Costing(ABC approach was used as the weight to search the operation route in the proper machine, so that the total production cost can be optimized. The search method that was used in this experiment is Simulated Annealling, a variant form Hill Climbing Search method. An ideal operation time to proses a part was used as the annealling schedule. From the empirical test, it could be proved that the use of ABC approach and Simulated Annealing to search the route (routing process can optimize the Total Production Cost. In the other hand, the use of ideal operation time to process a part as annealing schedule can control the processing time well. Abstract in Bahasa Indonesia : Flexible Manufacturing System (FMS adalah sistem manufaktur yang tersusun dari mesin-mesin Numerical Control (NC yang dikombinasi dengan Sistem Penanganan Material, sehingga job-job berbeda dikerjakan oleh mesin-mesin dengan alur yang berlainan. FMS menggabungkan produktifitas dan fleksibilitas yang tinggi dari Sistem Manufaktur Transfer Line dan Job Shop. Pada riset ini pendekatan Activity-Based Costing (ABC digunakan sebagai bobot / weight dalam pencarian rute operasi pada mesin yang tepat, untuk lebih mengoptimasi biaya produksi secara keseluruhan. Adapun metode Searching yang digunakan adalah Simulated Annealing yang merupakan varian dari metode searching Hill Climbing. Waktu operasi ideal untuk memproses sebuah part digunakan sebagai Annealing Schedulenya. Dari hasil pengujian empiris dapat dibuktikan bahwa penggunaan pendekatan ABC dan Simulated Annealing untuk proses pencarian rute (routing dapat lebih

  5. Online shopping hesitation.

    Cho, Chang-Hoan; Kang, Jaewon; Cheon, Hongsik John

    2006-06-01

    This study was designed to understand which factors influence consumer hesitation or delay in online product purchases. The study examined four groups of variables (i.e., consumer characteristics, contextual factors perceived uncertainty factors, and medium/channel innovation factors) that predict three types of online shopping hesitation (i.e., overall hesitation, shopping cart abandonment, and hesitation at the final payment stage). We found that different sets of delay factors are related to different aspects of online shopping hesitation. The study concludes with suggestion for various delay-reduction devices to help consumers close their online decision hesitation.

  6. Shopping in discount stores

    Zielke, Stephan

    2014-01-01

    quarters of intentions to shop in discount stores. Value perception has the strongest total effect, which is partly mediated by enjoyment, shame and guilt. Attributions influence the shopping intention indirectly via value perception and emotions. The inferior quality attribution has the strongest total......This paper analyzes the impact of price-related attributions, emotions and value perception on the intention to shop at grocery discounters in an integrated framework. Moderating effects of price consciousness are also analyzed. The results show that the proposed model explains almost three...... effect, followed by the efficiency of the business model attribution. The unfairness to stakeholders and the tricks in price communication attribution mostly influence the shopping intention for less price-conscious customers....

  7. Space Odyssey Gift Shop

    2000-01-01

    The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

  8. Machine Shop Practice. Trade and Industrial Education Course of Study.

    Emerly, Robert J.; And Others

    Designed for secondary school students who are interested in becoming machinists, this beginning course guide in machine shop practice is organized into the following sections: (1) Introduction, (2) instructional plan, (3) educational philosophy, (4) specific course objectives, (5) course outline, (6) job sheets, and (7) operation sheets. The…

  9. Heuristics for no-wait flow shop scheduling problem

    Kewal Krishan Nailwal

    2016-09-01

    Full Text Available No-wait flow shop scheduling refers to continuous flow of jobs through different machines. The job once started should have the continuous processing through the machines without wait. This situation occurs when there is a lack of an intermediate storage between the processing of jobs on two consecutive machines. The problem of no-wait with the objective of minimizing makespan in flow shop scheduling is NP-hard; therefore the heuristic algorithms are the key to solve the problem with optimal solution or to approach nearer to optimal solution in simple manner. The paper describes two heuristics, one constructive and an improvement heuristic algorithm obtained by modifying the constructive one for sequencing n-jobs through m-machines in a flow shop under no-wait constraint with the objective of minimizing makespan. The efficiency of the proposed heuristic algorithms is tested on 120 Taillard’s benchmark problems found in the literature against the NEH under no-wait and the MNEH heuristic for no-wait flow shop problem. The improvement heuristic outperforms all heuristics on the Taillard’s instances by improving the results of NEH by 27.85%, MNEH by 22.56% and that of the proposed constructive heuristic algorithm by 24.68%. To explain the computational process of the proposed algorithm, numerical illustrations are also given in the paper. Statistical tests of significance are done in order to draw the conclusions.

  10. Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

    Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

  11. Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

    Benjamin G Serfas

    Full Text Available The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

  12. The Relationship between Managerial Satisfaction and Job Turnover Intention: The Mediating Role of Job Satisfaction

    Rüveyda Öztürk Basol; Harun Demirkaya

    2017-01-01

    The growth of service sector in Turkey occurs faster than the other sectors and the number of shopping malls increases correspondingly. The rapid growth of the number of shopping malls has necessitated the measurement of the attitudes of the employees in this sector. This study demonstrated that the gender, marital status and age were not the significant variables on job satisfaction, managerial satisfaction and job turnover intention; however, education status and income...

  13. Retail Shopping Lists

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  14. Binjai Shopping Mall : Arsitektur Metafora

    Abadsyah, Haris

    2014-01-01

    City of Binjai have a potential to increase economic growth, especially in the field of trade and services.It can be seen from appearance of the commercial building like the shopping center ( Binjai Super Mall, Ramayana and Suzuya ) Construction of Binjai Shopping Mall intended for planning new shopping centers that provide public kebuthan in Binjai and well planned shopping center with optimal processing space and create a comfortable and pleasant atmosphere. In addition, the ...

  15. Machine Shop Grinding Machines.

    Dunn, James

    This curriculum manual is one in a series of machine shop curriculum manuals intended for use in full-time secondary and postsecondary classes, as well as part-time adult classes. The curriculum can also be adapted to open-entry, open-exit programs. Its purpose is to equip students with basic knowledge and skills that will enable them to enter the…

  16. To Capture Dynamic Shop Floor Knowledge in Global Production Networks

    Madsen, Erik Skov; Riis, Jens Ove; Sørensen, Brian Vejrum

    2007-01-01

    ­ing of the jobs to be transferred and has led to a changed focus for training new workers. Secondly, the paper will address how to capture the knowl­edge associated with carrying out these jobs. And third, planning the trans­fer process will be discussed to form a basis for future continuous improve...... industrial companies with plans to transfer production units to an­other location, this paper addresses  the initial steps of pursuing this issue by presenting and testing a model for identification of the activities, task and  knowledge on the shop floor jobs. This has provided a broader understand...

  17. Female Consumers Recreational Shopping Experiences

    Sarbjot Singh

    2013-04-01

    Full Text Available The study examines the core meaning of intrinsic shopping to understand their experimental aspects of recreational and leisure shopping. The study focus only on female shoppers of age group ranging from 25-30, and understand their mall experiences because this segment is newly transform into self dependent segment which have less social and familial liabilities and have enough enthusiasm to explore the world or their boundaries. The Grounded theory use for identification of recreational shopping themes which are (a seeking experiences and (b experimental shopping and each have respective sub themes. The themes are connected to the key idea that shoppers are motivated by their expectations and desires. The study uses social constructivism to find and understand the shopper meanings in real terms rather than imposing and judgment on them. The findings described the way people do recreational shopping and how shopping malls use as leisure space and become facilitators of recreational shopping activities. Females use malls to fulfill their recreational and leisure shopping experiences as this is the great way of enjoying shopping for females of small towns. In malls females not only enjoy product experiences but services experiences also which makes their shopping interesting. The way the female of this age category use malls help the marketers and retailers to understand this segment shopping patterns.

  18. Genotoxic damage in auto body shop workers.

    Siebel, Anna Maria; Basso da Silva, Luciano

    2010-10-01

    Some studies have shown increased DNA damage among car painters, but other professionals working in auto body and paint shops have not been extensively assessed. The aim of this study was to assess DNA damage in different types of auto body shop workers by measuring micronucleus (MN) levels in exfoliated buccal cells. The mean number of cells with MN per 2000 exfoliated buccal cells was analyzed in three groups of male workers: auto body repair technicians, painters, and office workers (control group). All participants answered a questionnaire inquiring about age, smoking habits, alcohol consumption, work practices, occupational exposure time, job activities, and use of protective equipment. The mean number of cells with MN was 3.50 ± 1.50 in auto body painters, 3.91 ± 2.10 in auto body repair technicians, and 0.80 ± 0.78 in office workers, with a significant difference between the control group and the two other groups (p = 0.0001). Age, occupational exposure time, use of protective masks, alcohol consumption, and smoking habit did not affect MN results. The findings indicate that technicians and painters working in auto body shops are at risk for genotoxic damage, while office workers seem to be protected.

  19. Towards Shop Floor Hardware Reconfiguration for Industrial Collaborative Robots

    Schou, Casper; Madsen, Ole

    2016-01-01

    In this paper we propose a roadmap for hardware reconfiguration of industrial collaborative robots. As a flexible resource, the collaborative robot will often need transitioning to a new task. Our goal is, that this transitioning should be done by the shop floor operators, not highly specialized...

  20. CERN Shop Christmas Sale

    Visits & Exhibition Service/ETT-VE

    2001-01-01

    11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

  1. Comparison Shopping Agents and Czech Online Customers’ Shopping Behaviour

    Pilik Michal

    2016-12-01

    Full Text Available The internet has changed the lifestyles and shopping behaviours of customers. Online purchasing enables people to obtain information about products and services provided more effectively and easily, with the result that home shopping has become ordinary and usual. This paper presents part of a research focusing on online shopping customers’ behaviour in the Czech Republic. The article pertains to comparison shopping agents (CPAs, a tool which provides information to customers and helps find the best offer. The research was conducted on the basis of an online questionnaire available on an internet web page. The main results confirmed a dependency between online purchasing and the use of shopping agents, which are very popular in the Czech Republic. Almost two-thirds of online shoppers use CPAs when they engage in internet shopping. The final part of the paper addresses references and customers’ reviews as an important factor for the selection of online retailer.

  2. CERN SHOP CHRISTMAS SALE

    Visits & Exhibition Service

    2000-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

  3. Job Creation, Job Destruction and Plant Turnover in Norwegian Manufacturing

    Tor Jakob Klette; Astrid Mathiassen

    1995-01-01

    The labour market in Norway, as in other Scandinavian countries, is often claimed to be overregulated and incapable of adjustment to changes in job opportunities. The results presented in this paper suggest to the contrary that in terms of job creation and job reallocation between plants, the manufacturing sector in Norway is surprisingly flexible, and similar to the manufacturing sector in other OECD countries such as the U.S. We show that 8.4 percent of the manufacturing jobs are eliminated...

  4. Online Shopping: Advantages over the Offline Alternative

    Dr Joshua Chang

    2003-01-01

    The advent of the Internet as a shopping medium has enabled shoppers to gain shopping benefits such as convenience and time-saving, better information, and price savings. This paper aims to provide a better understanding of the benefits of Internet shopping by identifying and discussing the advantages of Internet shopping over traditional storefront shopping.

  5. Job Grading Standard for Materials Expediter WG-6705.

    Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

    The standard is used to grade nonsupervisory jobs involved in routing and expediting the movement of parts, end items, supplies, and materials within production and repair facilities to meet priority needs. The work requires knowledge of material characteristics, uses, condition, industrial production shop procedures, shop layout, and internal…

  6. Online Shopping In The UK

    K. K. Ramachandran; K. K. Karthick; M. Saravana Kumar

    2011-01-01

    This paper will contribute to current academic literature in the area of online retailing and consumer behaviour. Our research outlines a survey conducted with respondents from the UK to ascertain their attitudes to grocery shopping both off and online. The findings indicate that, whilst the vast majority of our sample has experience of online shopping, few actively engage in online grocery shopping. Some of the reasons for this are highlighted and the key issues relate to consumer trust and ...

  7. Shopping Online Sebagai Gaya Hidup

    Lestari, Sri Budi

    2015-01-01

    The use of internet communication technology can make the world as if in one hand makes electronicbusiness with the concept of Online Shopping at its peak in recent years along with the development ofcommunication technologies over theInternet.How to shop online by using the internet through computers andmobile devices is increasingly popular smartphone can even be said to have become a trend today.Variousconvenience of shopping be the main thing to offer, with enough gadgets available in the...

  8. SHOPPING ONLINE SEBAGAI GAYA HIDUP

    Sri Budi Lestari

    2016-01-01

    The use of internet communication technology can make the world as if in one hand makes electronic business with the concept of Online Shopping at its peak in recent years along with the development of communication technologies over theInternet.How to shop online by using the internet through computers and mobile devices is increasingly popular smartphone can even be said to have become a trend today.Various convenience of shopping be the main thing to offer, with enough gadgets ...

  9. Shopping for Funeral Services

    ... Trial Offers? 'Bamboo' Fabrics 10 Ways to Avoid Fraud Avoiding Scams 101 Buying Alaska Native Art Buying ... Health & Fitness Jobs & Making Money Privacy, Identity & Online Security Blog Video & Media Scam Alerts Get money and ...

  10. Middle-Skilled Workforce Needs in a Changing Oil and Gas Industry: the Role of Flexibility. As the Oil Industry continues to shed jobs due to the global downturn in oil prices, one of the most vulnerable sectors to job loss are the middle-skilled workers such as the technicians and drill operators. We present options and ideas to mitigate the problem.

    Waddell, K.

    2015-12-01

    Middle-skilled workers are those whose jobs require considerable skill but not an advanced degree. Nationwide, one-third of the projected job growth for 2010-2020 will require middle-skilled workers. The educational paths to these jobs include career and technical education (CTE), certificates and associate's degrees from community colleges, apprenticeship programs, and training provided by employers. In the oil industry, the demand is expected to about 150,000 jobs. In environmental restoration and monitoring, there will be a need for at least 15,000 middle-skilled workers. Examples of the types of jobs include geological and petroleum technicians, derrick and drill operators, and pump system and refinery operators for the oil and gas sector. For the environmental restoration and monitoring sector, the types of jobs include environmental science technicians, and forest (and coastal) conservation technicians and workers. However, all of these numbers will be influenced by the growth and contraction of the regional or national economy that is not uncommon in the private sector. Over the past year, for example, the oil and gas industry has shed approximately 75,000 jobs (out of a workforce of 600,000) here in the United States, due almost exclusively to the drop of oil prices globally. A disproportionate number of the lost jobs were among the middle-skilled workforce. Meanwhile, the recent settlements stemming from the Deepwater Horizon oil spill are expected to create a surge of environmental restoration activity in the Gulf of Mexico region that has the potential to create thousands of new jobs over the next decade and beyond. Consequently, there is a need to develop education, training and apprenticeship programs that will help develop flexibility and complementary skill sets among middle-skilled workers that could help reduce the impacts of economic downturns and meet the needs of newly expanding sectors such as the environmental restoration field. This

  11. Online Shopping Woes

    Hou Weili

    2011-01-01

    AS a frequent online shopper,Zhou Fangjie,a 28-year-old white-collar worker,was annoyed when she could not open Hanyidushe,an online shop selling Korean-style clothing on Taobao Mall.Her experience resulted from the online protest initiated by small vendors on Taobao Mall,China's largest business to consumer online platform.Thousands of small vendors started the protest against larger established vendors by discrediting them through False orders,forming an anti-Taobao Union and setting up a chat room to devise ways to disrupt operations on Taobao Mall.

  12. Engaging the Shopping Experience

    Sørensen, Sanne Dollerup

    The revenues in brick-and-mortar stores have declined in the last decade, not least due to competition from online shopping. This thesis investigates how traditional stores might use principles from experience design to reverse this tendency. Brick-and-mortar stores are very important...... the interest in brick-and-mortar stores by engaging the customers emotionally. This thesis suggests that using insights from Possible World Theory in designing stores is one way to do this. Theoretically the thesis is interdisciplinary by drawing on knowledge from a wide spectrum of fields such as consumer...

  13. Reception Shop Special Stand

    Education and Technology Transfer Unit/ETT-EC

    2004-01-01

    Friday 15.10.2004 CERN 50th Anniversary articles will be sold in the Main Building, ground floor on Friday 15th October from 10h00 to 16h00. T-shirt, (S, M, L, XL) 20.- K-way (M, L, XL) 20.- Silk tie (2 models) 30.- Einstein tie 45.- Umbrella 20.- Caran d'Ache pen 5.- 50th Anniversary Pen 5.- Kit of Cartoon Album & Crayons 10.- All the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.00 hrs. Education and Technology Transfer Unit/ETT-EC

  14. Flow-shop scheduling problem under uncertainties: Review and trends

    Eliana María González-Neira; Jairo R. Montoya-Torres; David Barrera

    2017-01-01

    Among the different tasks in production logistics, job scheduling is one of the most important at the operational decision-making level to enable organizations to achieve competiveness. Scheduling consists in the allocation of limited resources to activities over time in order to achieve one or more optimization objectives. Flow-shop (FS) scheduling problems encompass the sequencing processes in environments in which the activities or operations are performed in a serial flow. This type of co...

  15. Coffee Shop Youth Lifestyle

    Vahid Shalchi

    2008-04-01

    Full Text Available This article has a review on the third zone coffee shop youth life style and looks forward to note the features of this group’s life style. Some of the other objective of this article are notifying the importance of different elements in life, consumption norms and the types of leisure. The results of this research shows that in this social atmosphere, post modern lifestyle features are seen as fashion, hybrid taste, interaction among local and global affairs, the importance of hobbies, consumption and the necessity of leisure. The study on this group of Iranian youth foretells how difficult. Complicated and fragile cultural policy is. Therefore, cultural affecting on the youth generation is not possible only through addrssing the values in surface.

  16. Buying cannabis in 'coffee shops'.

    Monshouwer, Karin; Van Laar, Margriet; Vollebergh, Wilma A

    2011-03-01

    The key objective of Dutch cannabis policy is to prevent and limit the risks of cannabis consumption for users, their direct environment and society ('harm reduction'). This paper will focus on the tolerated sale of cannabis in 'coffee shops'. We give a brief overview of Dutch policy on coffee shops, its history and recent developments. Furthermore, we present epidemiological data that may be indicative of the effects of the coffee shop policy on cannabis and other drug use. Dutch coffee shop policy has become more restrictive in recent years and the number of coffee shops has decreased. Cannabis prevalence rates in the adult population are somewhat below the European average; the rate is relatively high among adolescents; and age of first use appears to be low. On a European level, the use of hard drugs in both the Dutch adult and adolescent population is average to low (except for ecstasy among adults). International comparisons do not suggest a strong, upward effect of the coffee shop system on levels of cannabis use, although prevalence rates among Dutch adolescents give rise to concern. Furthermore, the coffee shop system appears to be successful in separating the hard and soft drugs markets. Nevertheless, in recent years, issues concerning the involvement of organised crime and the public nuisance related to drug tourism have given rise to several restrictive measures on the local level and have sparked a political debate on the reform of Dutch drug policy. © 2011 Trimbos Institute.

  17. Welfare Reform: Tribal TANF Allows Flexibility To Tailor Programs, but Conditions on Reservations Make It Difficult To Move Recipients into Jobs. Report to Congressional Requesters.

    General Accounting Office, Washington, DC.

    The 1996 Personal Responsibility and Work Opportunity Reconciliation Act gave American Indian and Alaska Native tribes the option to administer Temporary Assistance for Needy Families (TANF) programs either alone or in a tribal consortium. The law also granted tribal TANF programs more flexibility in program design than it gave to state programs.…

  18. Gold-decorated shopping centre; Golddekoriertes Shopping Center

    Altmannshofer, Robert

    2010-11-15

    In the autumn 2009, the German quality seal sustainable construction for commercial new buildings was introduced. Thus, owners and operators of retail real estate and shopping centres can make clear their commitment in the matter of sustainability. The Ernst-August-Galerie (Hanover, Federal Republic of Germany) developed and operated by ECE Projektmanagement GmbH and Co. KG (Hamburg, Federal Republic of Germany) was a pilot project and also the first gold in one. With its around 150 shops, the Ernst-August-Galerie offers a supermarket, fashion outlets, a food court, service outlets and restaurants/cafes. The spacious and elegantly designed shopping mall with its piazzas and light-flooded rotundas exudes a Mediterranean air, making it a high-quality venue for shopping, strolling and leisure activities.

  19. Shopping Centres and Selected Aspects of Shopping Behaviour (Brno, the Czech Republic)

    Kunc, J.; Tonev, P.; Szczyrba, Z.; Frantál, Bohumil

    2012-01-01

    Roč. 7, č. 2 (2012), s. 39-51 ISSN 2065-4421 Institutional support: RVO:68145535 Keywords : shopping centres * shopping habits * commuting to retail shops Subject RIV: AO - Sociology, Demography http://technicalgeography.org/pdf/2_2012/05_josef_kunc_petr_tonev_zdenek_szczyrba_bohumil_frantal_shopping_centres_and_selected_aspects_of_shopping_behaviour.pdf

  20. Process Waste Assessment - Paint Shop

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

  1. Shopping Mall to Study Hall.

    Rittner-Heir, Robbin M.

    1999-01-01

    Discusses how the Burnsville (Minnesota) expanded its high school classroom space by buying a shopping mall and converting it into classrooms. Renovation costs and classroom layout are briefly discussed; a floor plan is included. (GR)

  2. Vape Shop Employees: Public Health Advocates?

    Hart, Joy L; Walker, Kandi L; Sears, Clara G; Lee, Alexander S; Smith, Courteney; Siu, Allison; Keith, Rachel; Ridner, S. Lee

    2017-01-01

    INTRODUCTION E-cigarettes have increased in popularity and given rise to a new type of sales outlet?the vape shop. Expanding on work examining vape shop employee e-cigarette and tobacco attitudes and behaviors 1 , this study examined key messages that vape shop employees communicate to customers. METHODS Using informal interviews, observations, and a cross-sectional survey, we examined vape shop employees? (n=16) perceptions and e-cigarette use. Data were collected in nine vape shops in Louis...

  3. Hedonic Motivations for Online Shopping

    Pui-Lai To; E-Ping Sung

    2014-01-01

    The purpose of this study is to investigate hedonic online shopping motivations. A qualitative analysis was conducted to explore the factors influencing online hedonic shopping motivations. The results of the study indicate that traditional hedonic values, consisting of social, role, self-gratification, learning trends, pleasure of bargaining, stimulation, diversion, status, and adventure, and dimensions of flow theory, consisting of control, curiosity, enjoyment, and telepresence, exist in t...

  4. The productivity and work load in flexible production systems

    Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

    2006-01-01

    A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

  5. Special Issue: Flexible Work Arrangements.

    Olmstead, Barney, Ed.

    1996-01-01

    Section 1 contains five chapters on flexible work arrangements, self-employment, working from home, part-time professionals, job sharing, and temporary employment. Section 2 includes reviews of four books on working flexibly, concluding with a list of 23 additional readings. (SK)

  6. Time complexity and linear-time approximation of the ancient two-machine flow shop

    Rote, G.; Woeginger, G.J.

    1998-01-01

    We consider the scheduling problems F2¿Cmax and F2|no-wait|Cmax, i.e. makespan minimization in a two-machine flow shop, with and without no wait in process. For both problems solution algorithms based on sorting with O(n log n) running time are known, where n denotes the number of jobs. [1, 2]. We

  7. ATTITUDES TOWARD ONLINE SHOPPING FROM THE ASPECTS OF PERSONAL CHARACTERISTICS AND SHOPPING MOTIVE THROUGH A DEVELOPING CONCEPT: PRIVATE SHOPPING

    BAYBARS, Miray; USTUNDAGLI, Elif

    2011-01-01

    Private shopping is one of the concepts that serve as a members-only online shopping platform with deep discounts and well-known brands. The aim of this paper is to determine whether consumers’ need for uniqueness and innovativeness as a personal trait and price discount orientation affect consumer attitudes toward private shopping and their purchase decision or not. Research results revealed that need for uniqueness and innovativeness affect positive attitudes towards private shopping positi...

  8. Job Creation and Job Types

    Kuhn, Johan Moritz; Malchow-Møller, Nikolaj; Sørensen, Anders

    2016-01-01

    We extend earlier analyses of the job creation of start-ups versus established firms by considering the educational content of the jobs created and destroyed. We define education-specific measures of job creation and job destruction at the firm level, and we use these measures to construct a meas...

  9. Job Creation and Job Types

    Kuhn, Johan M.; Malchow-Møller, Nikolaj; Sørensen, Anders

    We extend earlier analyses of the job creation of start-ups vs. established firms by taking into consideration the educational content of the jobs created and destroyed. We define educationspecific measures of job creation and job destruction at the firm level, and we use these to construct a mea...

  10. Consumer protection and internet shopping

    Blažková, Lenka

    2010-01-01

    The diploma thesis is devoted to the issue of online shopping. Its aim is to analyze internet shopping and see the rights and obligations of consumers and sellers, which are based on current legislation. The thesis is divided into two parts. The theoretical part deals with purchase over the internet and its regulations. There are explained the concepts internet, e-business and e-commerce and indicate the types of e-business and is mentioned certification of online stores. The practical part i...

  11. Price learning during grocery shopping

    Jensen, Birger Boutrup

    Many attempts have been made to measure consumers' price knowledge for groceries. However, the results have varied considerably and conflict with results of reference price research. This is the first study to examine price knowledge before, during, and after store visit, thus enabling a study...... of what consumers learn about prices during grocery shopping. Three measures of price knowledge corresponding to different levels of price information processing were applied. Results indicate that price learning does take place and that episodic price knowledge after store exit is far more widespread...... than expected. Consequently, a new view of how consumer price knowledge evolves during grocery shopping is presented....

  12. Job Creation and Job Types

    Kuhn, Johan M.; Malchow-Møller, Nikolaj; Sørensen, Anders

    We extend earlier analyses of the job creation of start-ups vs. established firms by taking into consideration the educational content of the jobs created and destroyed. We define educationspecific measures of job creation and job destruction at the firm level, and we use these to construct...... a measure of “surplus job creation” defined as jobs created on top of any simultaneous destruction of similar jobs in incumbent firms in the same region and industry. Using Danish employer-employee data from 2002-7, which identify the start-ups and which cover almost the entire private sector......, these measures allow us to provide a more nuanced assessment of the role of entrepreneurial firms in the job-creation process than previous studies. Our findings show that while start-ups are responsible for the entire overall net job creation, incumbents account for more than a third of net job creation within...

  13. Multiattribute shopping models and ridge regression analysis

    Timmermans, H.J.P.

    1981-01-01

    Policy decisions regarding retailing facilities essentially involve multiple attributes of shopping centres. If mathematical shopping models are to contribute to these decision processes, their structure should reflect the multiattribute character of retailing planning. Examination of existing

  14. Retailing and Shopping on the Internet.

    Rowley, Jennifer

    1996-01-01

    Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

  15. Dynamic Support of Government in Online Shopping

    Hai, Le Chi; Alam Kazmi, Syed Hasnain

    2015-01-01

    Advancements in online shopping for consumers requires consistent government support policies and the introduction of substantial government laws and regulations. In order to establish innovative developments in online shopping market environment that makes online shopping faster and stable, the government perspective is vital with the Technology Acceptance Model (TAM) for research and development in online shopping behavior for consumer’s confidence and their purchase intention. The proposed...

  16. Marketing plan for a web shop business

    Koskivaara, Leonilla

    2014-01-01

    Internet has changed the buying behavior of consumers during the past years and companies need to adapt to the changes. Web shop business is an important sales channel of today’s companies. Advantages of a web shop business include cost effectiveness and potential to do business globally. Challenges of a web shop business include search engine optimization and running both, a retail store and a web shop at the same time. Social media has become an important marketing channel and has bec...

  17. The Shopping Mall: A Teenager Hangout.

    Anthony, Kathryn H.

    1985-01-01

    Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

  18. CERN Shop - Christmas Sale in Bldg. 33

    PH Department

    Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

  19. CERN Shop - Christmas Sale in Bldg. 33

    PH Department

    2010-01-01

    Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

  20. Kinect sensing of shopping related actions

    Popa, M.; Koc, A.K.; Rothkrantz, L.J.M.; Shan, C.; Wiggers, P.

    2011-01-01

    Surveillance systems in shopping malls or supermarkets are usually used for detecting abnormal behavior. We used the distributed video cameras system to design digital shopping assistants which assess the behavior of customers while shopping, detect when they need assistance, and offer their support

  1. Shopping for a safer car

    2010-01-01

    This brochure provides some helpful tips on what to look for when shopping for a safer car. Automakers are increasingly advertising the safety features of their cars. The problem is sorting out their claims and zeroing in on the safety features that ...

  2. Machine Shop Fundamentals: Part I.

    Kelly, Michael G.; And Others

    These instructional materials were developed and designed for secondary and adult limited English proficient students enrolled in machine tool technology courses. Part 1 includes 24 lessons covering introduction, safety and shop rules, basic machine tools, basic machine operations, measurement, basic blueprint reading, layout, and bench tools.…

  3. Workload based order acceptance in job shop environments

    Ebben, Mark; Hans, Elias W.; Olde Weghuis, F.M.; Olde Weghuis, F.M.

    2005-01-01

    In practice, order acceptance and production planning are often functionally separated. As a result, order acceptance decisions are made without considering the actual workload in the production system, or by only regarding the aggregate workload. We investigate the importance of a good workload

  4. Customer experience with online shopping : what are the unique experiences customers seek from online shopping?

    Jin, Daoyan

    2013-01-01

    Over the last decade, there has been a great change in consumers' shopping behavior along with technological change. Online shopping is the use of computer technology for better shopping performance. Retailers are busy in studying consumers' behavior to see their attitudes toward online shopping and to meet the demand of online shoppers. Due to my interest in online business, I have also decided to study about customers' attitudes toward online shopping and specifically regarding factors that...

  5. PERBANDINGAN KINERJA ALGORITMA GENETIKA DAN ALGORITMA HEURISTIK RAJENDRAN UNTUK PENJADUALAN PRODUKSI JENIS FLOW SHOP

    Tessa Vanina Soetanto

    1999-01-01

    Full Text Available Flow shop scheduling problem is to schedule a production process of n jobs that go through the same process sequence and the same m machines. Most researches are don to accomplish only one objective, i.e. minimizing makespan. The other objective, such as total flow time, or multiple objectives that is minimizing makespan, total flow time and machine idle time, will be more effective in reducing scheduling cost, as written in French (1982. Rajendran algorithm (1995 that solves flow shop problem with multiple objectives will be used to evaluate the proposed algorithm: Genetic Algorithm, developed by Sridhar & Rajendran (1996 on a problem that existed in a shoe factory. Abstract in Bahasa Indonesia : Masalah penjadualan flow shop adalah menjadualkan proses produksi dari masing-masing n job yang mempunyai urutan proses produksi dan melalui m mesin yang sama. Kebanyakan penelitian hanya mengacu pada satu tujuan saja yaitu meminimumkan makespan. Tujuan yang lain, seperti meminimumkan total flow time atau multiple objectives yang meminimumkan makespan, total flow time dan machine idle time akan lebih efektif dalam mengurangi biaya penjadualan, sebagaimana dikatakan oleh French (1982. Algoritma Rajendran (1995 yang menyelesaikan masalah flow shop dengan multiple objectives akan dipergunakan untuk mengevaluasi algoritma usulan: Algoritma Genetika, yang dikembangkan oleh Sridhar & Rajendran (1996 pada suatu masalah yang ditemui di suatu perusahaan sepatu. Kata kunci: flow shop, algoritma genetika, multiple objectives

  6. Jobs API

    General Services Administration — This Jobs API returns job openings across the federal government and includes all current openings posted on USAJobs.gov that are open to the public and located in...

  7. Job satisfaction

    PODROUŽKOVÁ, Lucie

    2013-01-01

    Bachelor thesis deals with job satisfaction. It is often given to a context with the attitude to work which is very much connected to job satisfaction. Thesis summarises all the pieces of information about job satisfacion, factors that affect it negatively and positively, interconnection of work satisfaction and work motivation, work behaviour and performance of workers, relationship of a man and work and at last general job satisfaction and its individual aspects. In the thesis I shortly pay...

  8. Job Analysis

    Bravená, Helena

    2009-01-01

    This bacherlor thesis deals with the importance of job analysis for personnel activities in the company. The aim of this work is to find the most suitable method of job analysis in a particular enterprise, and continues creating descriptions and specifications of each job.

  9. Differential Validities for Shop Courses: Proposal B: Follow-Up of Subjects' Work Experiences. Final Report. Vol I: Procedures and Results.

    Isabelle, L. A.; Lokan, J. J.

    Follow-up information was collected on 1500 students who attended a two-year occupational high school, in order to relate predictor measures to success during training and subsequent job success. Although not predictive of dropouts, variables in the pre-test battery did predict performance in academic and shop courses; ratings of job success were…

  10. PENGARUH ATMOSFER PUSAT BELANJA PADA SHOPPING VALUE

    Astrid Kusumowidagdo

    2015-11-01

    Full Text Available AbstractAt the moment, the creation of shopping environment design that provides certain sensation and experience become strategy of the shopping center. This research aims to find out about the influence of shopping center’s atmosphere towards shopping value. The formative factors of shopping centre’s atmosphere are architectural features, interior features and support facilities. The research begins with a focus group to adjust the indicators of the previous research to the present research’s object. The next stage of research is done with a multiple regression analysis. The research object is the atmosphere condition of Senayan City shopping center in Jakarta and the subjects are samples totaling to sixty people. The samples are visitors from the middle-class segment between the age of 18-35.The research finds that architectural features, interior features and support facilities collectively bring an influence towards shopping value in Senayan City Pusat belanja, wether partially, only interior features show the significant influence towards shopping value.Keywords: design, atmosphere, shopping centre, shopping value.AbstrakSaat ini penciptaan lingkungan belanja dengan yang memberikan sensasi dan pengalaman telah menjadi bagian dari strategi bisnis pusat belanja. Penelitian ini bertujuan untuk menelusuri pengaruh atmosfer pusat belanja terhadap shopping value. Atmosfer pusat belanja dibentuk oleh faktor-faktor yaitu fitur arsitektur, fitur interior dan fasilitas penunjang. Penelitian ini diawali dengan focus group untuk penentuan indikator yang tepat dan dilanjutkan dengan survey pada 60 orang dengan usia 18-35 tahun yang bersegmen menengah. Obyek penelitian adalahatmosfer dari pusat belanja Senayan City. Hasil penelitian menunjukkan terdapat hubungan dari faktor-faktor atmosfer pusat belanja secara serempak pada shopping value, sedangkan secara parsial hanya fitur interior yang memberikan pengaruh signifikan pada shopping value

  11. Online Shop System with Zencart

    Uqbah Iqbal

    2016-01-01

    Written by Sabri Saifulsham and Syazwan Saifulsham, this book has eleven chapters that using quantitative research methodology to describes the three main components of success in building and managing online shops, namely the potential of products, obtain product and build and manage online stores. All three of these components are combined into a single system that can help anyone to build an online store even if no basic technical skills. The measures described also make it easy to use Zen...

  12. Design of online shopping system

    Li, Yueyuan

    2011-01-01

    E-commerce is a kind of comprehensive activity of management automation, business information network and financial electronic technology. It is a kind of commercial activity accomplished through the information network in all kinds of business activities in the world. As a new marketing model, the emergence of online stores is an epoch-making revolution in the field of product circulation. The thesis focuses on a study of how to design a small online shopping system which is simple and f...

  13. Outsourcing and scheduling for a two-machine flow shop with release times

    Ahmadizar, Fardin; Amiri, Zeinab

    2018-03-01

    This article addresses a two-machine flow shop scheduling problem where jobs are released intermittently and outsourcing is allowed. The first operations of outsourced jobs are processed by the first subcontractor, they are transported in batches to the second subcontractor for processing their second operations, and finally they are transported back to the manufacturer. The objective is to select a subset of jobs to be outsourced, to schedule both the in-house and the outsourced jobs, and to determine a transportation plan for the outsourced jobs so as to minimize the sum of the makespan and the outsourcing and transportation costs. Two mathematical models of the problem and several necessary optimality conditions are presented. A solution approach is then proposed by incorporating the dominance properties with an ant colony algorithm. Finally, computational experiments are conducted to evaluate the performance of the models and solution approach.

  14. Shopping Problems among High School Students

    Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

    2010-01-01

    Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

  15. Shopping problems among high school students.

    Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

    2011-01-01

    Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    Asnawati; Wahyuni S.

    2018-01-01

    This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829) > Ftable (2.669) which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant fa...

  17. Flexible Bronchoscopy.

    Miller, Russell J; Casal, Roberto F; Lazarus, Donald R; Ost, David E; Eapen, George A

    2018-03-01

    Flexible bronchoscopy has changed the course of pulmonary medicine. As technology advances, the role of the flexible bronchoscope for both diagnostic and therapeutic indications is continually expanding. This article reviews the historical development of the flexible bronchoscopy, fundamental uses of the flexible bronchoscope as a tool to examine the central airways and obtain diagnostic tissue, and the indications, complications, and contraindications to flexible bronchoscopy. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Measuring consumer perceptions of online shopping convenience

    Ferreira, Margarida Bernardo

    2016-01-01

    The aim of this master thesis is to identify which dimensions of convenience affect consumers’ intention of using online shopping. Also it explores a conceptual model to measuring consumer perceptions of online shopping convenience. This paper contains prospects about online consumer behavior, and the results have important implications for retailers, managers and marketers, related to online shopping strategies. An empirical investigation was carried out to test the hypotheses. In order t...

  19. Cellular Phone Users- Willingness to Shop Online

    Norazah Mohd Suki; Norbayah Mohd Suki

    2009-01-01

    This study aims to identify cellular phone users- shopping motivating factors towards online shopping. 100 university students located in Klang Valley, Malaysia were involved as the respondents. They were required to complete a set of questionnaire and had to own a cellular phone in order to be selected as sample in this study. Three from five proposed hypotheses were supported: purchasing information, shopping utilities and service quality. As a result, marketers and retailers should concent...

  20. Determinants Of Online Shopping In Manado

    Halim, Ellen

    2013-01-01

    Retailers utilize online media to reach more potential customers. Internet connects the retailer and customers without any geographic location boundaries. Internet growth has a positive impact for business world. There is a new shopping method in non-store shopping as people can buy products or services without having to travel to the outlets like traditional retail does. With the increase of online retailers on internet world, online shopping became popular. The objective of this research is...

  1. Reflexivity in performative science shop projects

    Beunen, R.; Duineveld, M.; During, R.; Straver, G.H.M.B.; Aalvanger, A.

    2012-01-01

    Science shop research projects offer possibilities for universities to engage with communities. Many science shop projects directly or indirectly intend to empower certain marginalised groups or interests within a decision-making process. In this article we argue that it is important to reflect on the role and position the researchers have in these projects. We present three science shop projects to illustrate some of the dilemmas that may arise in relation to citizen empowerment, democracy, ...

  2. Passion and dependency in online shopping activities.

    Wang, Chih-Chien; Yang, Hui-Wen

    2007-04-01

    This study examines the influence of harmonious passion (HP) and obsessive passion (OP) to online shopping dependency. The results show that both HP and OP might lead to online shopping dependency and online shoppers with OP are more dependent on online shopping activities. In addition, this study also found out that HP and OP could be denoted as a sequence of different intensities of passion, where HP might be a necessity of OP.

  3. CONSUMER BEHAVIOUR AND ATTITUDE TOWARDS ONLINE SHOPPING

    S. Nethra; Dr. V. T. Dhanaraj

    2016-01-01

    The popularity of online shopping has caught the attention of many peoples. Many studies have been done in developed nations to know about the attitude and behaviour of consumers towards online shopping. The research is focused on consumer behaviour and attitude towards online shopping in Coimbatore district. The study is based on primary data which has been collected by issuing questionnaire to 200 respondents residing in Coimbatore district by adopting convenient sampling method. The stat...

  4. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    Hermawan F.; Wijayanti S.H.

    2018-01-01

    This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the info...

  5. The influences of social e-shopping in enhancing young women’s online shopping behaviour

    Dennis, C; Morgan, A; Wright, LT; Jayawardhena, C

    2010-01-01

    Copyright @ 2010 Westburn Publishers Ltd The background to this paper is that shoppers, particularly women, are motivated by a variety of different reasons, including socialising and enjoyment. Despite the growth of Internet retailing (e-retailing), these social needs are largely unmet in e-shopping. In the high street, women do most of the shopping but online shopping (e-shopping) tends to be dominated by male shoppers. At the same time, social networking is growing fast and is especially...

  6. INDONESIAN CUSTOMER SATISFACTION IN ONLINE SHOPPING TRADING

    Hermawan F.

    2018-03-01

    Full Text Available This research aims to find out if the ease of shopping, site design, informative, comprehensive, and communication have a significant influence on the level of Indonesian customer satisfaction in online shopping transactions and how the impact to the word of mouth communication. Respondents of this study are the 250 students of Jakarta colleges. This study found that the variables of design, simplicity, and security have an influence on customer satisfaction in shopping online, while the informative variable and communication have no influence on the customer's satisfaction online shopping.

  7. Designing electronic shops, persuading consumers to buy

    Dormann, Claire

    2000-01-01

    The purpose of this article is to show how to design persuasive and successful Web shops. An approach to commercial site design that draws on theories of visual persuasion is proposed. We focus on the role of emotion. Images in an ad are typically meant to create some emotional disposition toward....... To strengthen the discussion, an evaluation of shop home pages, situated within the perspective of visual persuasion is presented. This study has given some indications that viewers form distinctive emotional impressions from shop designs. Thus, by building on visual persuasion theories, we can learn how...... to design seductive Web shops....

  8. Social Sustainability of Shopping Streets in Ankara

    Özge YALÇINER ERCOŞKUN

    2013-02-01

    Full Text Available Shopping streets are integral parts of public spaces in traditional shopping areas of Central Business Districts (CBD. Furthermore, as modern shopping venues, shopping centers offer advantages for modern lifestyles with spacious shopping areas, variety of commercial and social activities, and economic value of their investments. These advantages act in favor of shopping centers and improve the level of shopping street social sustainability and its relevant concepts. The aim of this study is to analyze the main shopping streets of Ankara, using the concepts of social sustainability. In this study, these concepts, such as locality, identity, vitality, viability, sense of place, conviviality, meaning and local characteristics of the shopping streets are investigated. For the first time, the retail unit locations in Ankara, their brands and their business types, are illustrated on thematic land use maps using Geographical Information Systems (GIS software. Next, population activities and consumer spatial behavior are observed and marked on maps that are also referred to as social sustainability maps. The results of the study can be useful in formulating strategies within the framework of social sustainability, which is a relatively new concept.

  9. Skill Flexibility among Schoolteachers: Operationalization and Organizational Implications.

    Rosenblatt, Zehava; Inbal, Batia

    1999-01-01

    Investigates effects of skill flexibility on Israeli secondary teachers' work attitudes and job performance. Both role and functional flexibility were associated with improved teachers' work performance; role flexibility is linked to high organizational commitment and low powerlessness. Principals appreciate skill flexibility, but organizational…

  10. Mixture design procedure for flexible base.

    2013-04-01

    This document provides information on mixture design requirements for a flexible base course. Sections : design requirements, job mix formula, contractor's responsibility, and engineer's responsibility. Tables : material requirements; requirements fo...

  11. Providing Better University Personnel through Job Sharing.

    Hutton, Clifford E.; McFarlin, Joy Simon

    1982-01-01

    Universities could benefit by offering more flexible part-time job opportunities such as job-sharing, following an apparent national trend in accommodating social and economic needs. Institutions have many options in scheduling and allocating tasks. Possible benefits include improved employee attitude and productivity. (MSE)

  12. Optimasi Penjadwalan Pengerjaan Software Pada Software House Dengan Flow-Shop Problem Menggunakan Artificial Bee Colony

    Muhammad Fhadli

    2016-12-01

    This research proposed an implementation related to software execution scheduling process at a software house with Flow-Shop Problem (FSP using Artificial Bee Colony (ABC algorithm. Which in FSP required a solution to complete some job/task along with its overall cost at a minimum. There is a constraint that should be kept to note in this research, that is the uncertainty completion time of its jobs. In this research, we will present a solution that is a sequence order of project execution with its overall completion time at a minimum. An experiment will be performed with 3 attempts on each experiment conditions, that is an experiment of iteration parameter and experiment of limit parameter. From this experiment, we concluded that the use of this algorithm explained in this paper can reduce project execution time if we increase the value of total iteration and total colony. Keywords: optimization, flow-shop problem, artificial bee colony, swarm intelligence, meta-heuristic.

  13. Scheduling stochastic two-machine flow shop problems to minimize expected makespan

    Mehdi Heydari

    2013-07-01

    Full Text Available During the past few years, despite tremendous contribution on deterministic flow shop problem, there are only limited number of works dedicated on stochastic cases. This paper examines stochastic scheduling problems in two-machine flow shop environment for expected makespan minimization where processing times of jobs are normally distributed. Since jobs have stochastic processing times, to minimize the expected makespan, the expected sum of the second machine’s free times is minimized. In other words, by minimization waiting times for the second machine, it is possible to reach the minimum of the objective function. A mathematical method is proposed which utilizes the properties of the normal distributions. Furthermore, this method can be used as a heuristic method for other distributions, as long as the means and variances are available. The performance of the proposed method is explored using some numerical examples.

  14. Strategy of image management in retail shops

    Sandra Soče Kraljević

    2007-12-01

    Full Text Available A sound positioning in consumers’ mind, along with strong promotion support, brought many retail shops to the top. This is mostly thanks to the image created in the consumers’ mind. A retail shop’s image may but need not conform to reality. Image often looks like a cliché. It overstates certain elements of the shop while simply omitting others. That is exactly why image is of great importance and often crucial to consumer behavior. This paper aims at determining the impact of image on customer behavior in the course of decision making about shopping and choosing a particular retail shop. Image is a significant factor of success of every company, hence also of a retail shops. It is a relatively strong value and a component of creating competitive advantage. But if we do not pay sufficient attention to image, it can become counterproductive. Instead to, like an additional value helps creating and maintaining the advantage in competition and realization of business aims, transforms into a limiting factor. Therefore, it is imperative to identify the elements of image that are of greatest importance to customers. Research has shown that customers choose the retail shop first and after that products and brands within this shop. When it comes to the supermarket, as a kind of retail shop, research has shown that two out of three shopping decisions are made by the customer on the spot, that is, without previous planning. That practically means that we can influence customers with different sales techniques. The paper suggests different strategies of image management for supermarkets and conventional shops. For supermarkets it is the “widest assortment” strategy, while for conventional shops the strategy is that of a “selected group of products“. Improvements to research methods will enable getting more information about customer behavior, while pressures of increased competition in the business environment will force retailers to get

  15. On flexibility

    Weiss, Christoph R.; Briglauer, Wolfgang

    2000-01-01

    By building on theoretical work by Mills and Schumann (1985) and Ungern-Sternberg (1990) this paper provides evidence on the determinants of two dimensions of flexibility, the flexibility in adjusting aggregate output over time (tactical flexibility) as well as the ability to switch quickly between products (operational flexibility). Econometric analysis of a sample of 40.000 farms in Upper-Austria for the period 1980 to 1990 suggests that larger full-time farms operated by younger, better ed...

  16. Tourist market segmentation by motivation to shop: A case study of Istanbul, Turkey

    Egresi István

    2017-01-01

    Full Text Available Previous research has indicated that shopping could make up for a significant part of the tourist experience and could provide significant benefits to destinations by contributing to local retail revenue and by generating many jobs. In order to design better marketing strategies, destination managers must understand what attracts tourists to a destination and makes them shop while there. However, tourists represent a heterogeneous group and subgroups of individuals are motivated to visit a destination for a variety of reasons. The primary purpose of this study is to segment tourist shoppers visiting Istanbul according to their motivation to shop. Five distinctive groups of 'product-focused shoppers', 'shoppers for cultural experience', 'reluctant shoppers', 'difference seekers' and 'total shoppers' were found and compared by the geographical origin of the tourists, their socio-demographic characteristics, travel characteristics and behaviour, primary motivation for the trip, activity participation and shopping preferences and attitudes. The findings indicate that destination marketers must develop their strategies and marketing products to address the heterogeneity of motivations underlying tourist shopping.

  17. Job Sharing: General Information. A Handbook for Employers.

    Olmsted, Barney

    Arranging work time in new and flexible ways has been a topic of growing interest for the past ten years. This handbook for employers explains one way in which jobs can be made more flexible--job sharing. It discusses ways that work hours can be shared with potential benefits for employer and employees. Topics discussed include definition of job…

  18. PROPOSTA PARA IMPLANTAÇÃO DE BUSINESS INTELLIGENCE EM SHOPPING CENTER

    Oswaldo Moreira Pereira

    2016-06-01

    Full Text Available The aim of the present job was to study the concepts involved in the business intelligence process to propose a solution that supports strategic decision with focus on shopping centers use. The BI technology proposed make use of SQL Server database and its tools that allows the multidimensional modeling, the transformation of data into strategic knowledge and the presentation of the results by the analytical processing information.

  19. Doctor shopping: a concept analysis.

    Worley, Julie; Hall, Joanne M

    2012-01-01

    Prescription drug abuse is a significant problem in the United States that poses a serious health risk to Americans and is therefore significant to the field of nursing. The prescription drugs that are designated in the United States as having abuse potential are called controlled or scheduled drugs. The most common types of abused prescription drugs are benzodiazepines prescribed for anxiety, opioids prescribed for pain, and stimulants prescribed for attention deficit disorder. These prescription drugs are abused by taking larger doses than prescribed for nonmedical use to achieve a high or euphoric feeling, or are sold illicitly for profit. In 2009, there were 2.4 million nonmedical users of prescription opioids in the United States. These prescription drugs are often obtained by seeing multiple prescribers, often under false pretenses or with complicity from the prescribers that leads to abuse and illicit sales. The term doctor shopping has been used not only to refer to this phenomenon but has also had other meanings throughout the past decades. Thus, concept analysis is the focus of this article for clarification using the Walker and Avant method. Health implications and suggestions for minimizing doctor shopping are included.

  20. Product Characteristics and Internet Shopping Intentions.

    Vijayasarathy, Leo R.

    2002-01-01

    Discussion of electronic commerce and online marketing focuses on an empirical study that investigated differences between Internet shopping intentions for products categorized by cost and tangibility. Highlights include hypotheses; respondent characteristics; results that showed that intentions to shop using the Internet differ by tangibility of…

  1. Rental Values in UK Shopping Malls

    Yuo, Tony Shun-Te; Lizieri, Colin; McCann, Phillip; Crosby, Neil

    This paper employs a unique dataset to analyse the retail rental levels of 1108 retail tenants in 148 UK regional shopping malls. The dataset integrates information regarding the characteristics of the shopping centre, the individual retailer, the brand, the individual unit occupied, the tenancy

  2. Finding Worst-Case Flexible Schedules using Coevolution

    Jensen, Mikkel Thomas

    2001-01-01

    Finding flexible schedules is important to industry, since in many environments changes such as machine breakdowns or the appearance of new jobs can happen at short notice.......Finding flexible schedules is important to industry, since in many environments changes such as machine breakdowns or the appearance of new jobs can happen at short notice....

  3. Shop Floor-Level Control of Manufacturing Companies: An Interview Study in Finland

    Tokola Henri

    2015-02-01

    Full Text Available This paper publishes the results of interviews regarding shop-floor-level control of 18 Finnish manufacturing companies. The interviews had 17 open questions relating to demand characteristics, shop floor-level control issues, production flexibility, inventory control, and potential development areas. In order to get insights from the interviews, this paper analyses the answers from the interviews and categorises them into typical answers. The companies that were interviewed are also categorised as small companies with their own end products, subcontractors, or large companies with their own end products, and the emphasis of the analysis is on how companies differ in their shop floor-level control. The results show that different types of companies have different characteristics. Small companies are characterised by constant workflow, seasonal trends in demand, and the use of forecasts. Subcontractors have great daily variation in their demand and processing times. Large companies tend to focus on inventory issues.

  4. Flexible Work Schedules. ERIC Digest.

    Kerka, Sandra

    Flexible work schedules are one response to changes in the composition of the work force, new life-styles, and changes in work attitudes. Types of alternative work schedules are part-time and temporary employment, job sharing, and flextime. Part-time workers are a diverse group--women, the very young, and older near-retirees. Although part-time…

  5. Potential of Natural Ventilation in Shopping Centres

    Diederichsen, Alice; Friis, Kristina; Brohus, Henrik

    2008-01-01

    The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV) in shop......The indoor environmental quality (IEQ) is a fundamental requirement for a well performing shopping centre. This paper contains a pilot study of the potential of using hybrid ventilation (a combination of automatically controlled natural and mechanical ventilation - respectively NV and MV......) in shopping centres with focus on both the achieved IEQ and energy consumptions for air movement. By thermal building simulations it is found that there exists an interesting potential for hybrid ventilation of shopping centres, which can lead to great savings in the electrical energy consumptions...

  6. THE INFLUENCE OF HEDONIC SHOPPING MOTIVATION TO THE IMPULSE BUYING OF ONLINE-SHOPPING CONSUMER ON INSTAGRAM

    Asnawati

    2018-02-01

    Full Text Available This research aims to know the influence of Adventure Shopping, Relaxation Shopping, Value Shopping, Social Shopping and Idea Shopping variables to the variable of Impulse Buying of Online-Shopping Consumer on Instagram. The type of the research is explanatory research. The result of F-test showed that Fcount (12.829 > Ftable (2.669 which meant that research variables had influences to the Impulse Buying. With partial correlation value of 0.548, Idea Shopping variable became the dominant factor influencing Impulse Buying on the online-shopping purchase on Instagram.

  7. Working Hours Flexibility. Background Paper No. 30.

    Staines, Graham L.

    Flexible work schedules offer the promise of a low-cost option for helping people manage work and family responsibilities. Alternative work schedules include part-time work, job sharing, work sharing, shiftwork, compressed work week, flexitime, and flexiplace. Flexitime is the most prevalent full-time flexible schedule and is second in prevalence…

  8. Influence of job demands and job control on work-life balance among Taiwanese nurses.

    Ng, Lee-Peng; Chen, I-Chi; Ng, Hui-Fuang; Lin, Bo-Yen; Kuar, Lok-Sin

    2017-09-01

    This study investigated the extent to which the job demands and job control of nurses were related to their work-life balance. The inability to achieve work-life balance is one of the major reasons for the declining retention rate among nurses. Job demands and job control are two major work domain factors that can have a significant influence on the work-life balance of nurses. The study measured the job demands, job control and work-life balance of 2040 nurses in eight private hospitals in Taiwan in 2013. Job demands and job control significantly predicted all the dimensions of work-life balance. Job demands increased the level of work-life imbalance among nurses. While job control showed positive effects on work/personal life enhancement, it was found to increase both work interference with personal life and personal life interference with work. Reducing the level of job demands (particularly for psychological demands) between family and career development and maintaining a proper level of job control are essential to the work-life balance of nurses. Flexible work practices and team-based management could be considered by nursing management to lessen job demand pressure and to facilitate job engagement and participation among nurses, thus promoting a better balance between work and personal life. © 2017 John Wiley & Sons Ltd.

  9. New approaches to job-sharing of training posts in the North Thames region.

    Goldberg, I; Paice, E

    This paper proposes a new way of managing the provision of flexible training opportunities by job-sharing. It shows how the difficulties of implementing job-sharing can be overcome, and gives an example of implementation of job-sharing in the context of flexible training.

  10. Preferences of men and women in the Czech Republic when shopping for food

    Jana Turčínková

    2012-01-01

    Full Text Available Buying behavior of men and women shows considerable differences. The individual stages of purchase decision-making process lead to convergence or conversely deepening of these differences. The paper provides results of analysis of chosen aspects of consumer behavior of men and women in the Czech Republic. It focuses on the grocery shopping in small-sized shops. Due to the complexity of the problem the research could not cover all aspects associated with this topic. It identifies who in a household is responsible for grocery shopping, how often and in what quantity of purchases. The paper examines to what extent is a purchase planned and by what a consumer is usually stimulated to an impulsive shopping. Further, it describes factors leading to a choice of shopping place and to a satisfaction with shopping conditions. The primary data was collected through a method of in-depth interviews conducted from January to March 2011 on a sample of 56 respondents in the three smaller stores in the Moravské Budějovice, and via questionnaire survey which took place in all regions of the Czech Republic (n = 5809 among respondents aged 12+. The results confirmed we can observe differences in shopping behavior of women and man, even though the importance of various factors taken into account when making a choice of a particular food product show significant differences from the gender perspective (none of the analyzed factors was found to have higher statistical significance than weak, p < .05. The qualitative research, however, revealed that women tend to make more frequent purchases and keep a certain level of supplies at home, while men tend to leave shopping till it becomes necessary, they are more likely to stick to their shopping list and more loyal to their favorite products. Women are more flexible when in need to replace a missing product with its substitute. The proportion of impulsively purchased items in a shopping basket is higher for women than

  11. Branding on the Shop Floor

    Szilvia Gyimóthy

    2010-09-01

    Full Text Available Service branding is a particular form of emotional management, where employees are regarded as adaptable media, who can be trained to convey corporate values while interacting with customers. This paper examines the identity work of butchers during the brand revitalisation campaign of Kvickly, a Danish supermarket chain. During the implementation of the “Best Butcher in Town”-project, Kvickly’s shop floor becomes an engineered servicescape where the norms of good salesmanship must be performed. By documenting the disloyal behaviour of butchers, we demonstrate that the affective commitment towards corporate brand values is closely related with self-enactment opportunities of occupational communities. Total service-orientation threatens butchers’ perception of autonomy and may therefore result in the emergence of resistant sub-cultures.

  12. Neural nets for job-shop scheduling, will they do the job?

    Rooda, J.E.; Willems, T.M.; Goodwin, G.C.; Evans, R.J.

    1993-01-01

    A neural net structure has been developed which is capable of solving deterministic jobshop scheduling problems, part of the large class of np-complete problems. The problem was translated in an integer linear-programming format which facilitated translation in an adequate neural net structure. Use

  13. 48 CFR 252.227-7033 - Rights in shop drawings.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

  14. 48 CFR 1952.227-77 - Rights in shop drawings.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

  15. Dimensions of Consumer's Perceived Risk in Online Shopping

    YE Naiyi

    2004-01-01

    Perceived risk is an important concept in consumer behavior in online shopping. It impedes the adopting online shopping. A structure model with seven factors of consumer's perceived risk in online shopping is developed in this paper. The results have the descriptive power about Chinese consumers' perceived risk in Internet shopping and provide framework for managerial use in China's e-commerce market environment.

  16. Youth Clothes-Shopping Behavior: An Analysis by Gender.

    Peters, John F.

    1989-01-01

    Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

  17. Consumers’ Attitude towards Online Shopping : Factors influencing Gotland consumers to shop online

    Sultan, Muhammad Umar; Uddin, Md. Nasir

    2011-01-01

    In the era of globalization electronic marketing is a great revolution.  Over the last decade maximum business organizations are running with technological change.  Online shopping or marketing is the use of technology (i.e., computer) for better marketing performance. And retailers are devising strategies to meet the demand of online shoppers; they are busy in studying consumer behavior in the field of online shopping, to see the consumer attitudes towards online shopping. Therefore we have ...

  18. Conflicting flexibility

    De Jong, P.; Schaap, A.

    2011-01-01

    New buildings are designed for first users. For a sustainable approach there are many advantages in designing in flexibility and adjustability in order to enable and facilitate the other sequential users. For the first investor this flexibility is translated into improved exit values due to

  19. ShopComm: Community-Supported Online Shopping for Older Adults.

    Gorkovenko, Katerina; Tigwell, Garreth W; Norrie, Christopher S; Waite, Miriam; Herron, Daniel

    2017-01-01

    The United Kingdom has an ageing population whose members experience significant life transitions as they grow older, for example, losing mobility due to deteriorating health. For these adults, digital technology has the potential to sustain their independence and improve their quality of life. However older adults can be reluctant to use digital solutions. In this paper, we review a local charity providing a grocery shopping service for older adults who are unable to go themselves. We explore how older adults perceive the benefits and drawbacks of both physical and digital shopping. Using these insights, we designed ShopComm to enable and support older adults with mobility impairments to shop online.

  20. Public Relations Program for a Shopping Mall.

    Feigley, David A.

    1980-01-01

    An account is given of a highly successful sports, health, and recreation exhibit run by Rutgers University (New Jersey) in a public shopping mall. Organization and entertainment were the keynotes of the success. (LH)

  1. Profiling the Shopping Behavior of Elderly Consumers.

    Mason, J. Barry; Bearden, William O.

    1978-01-01

    Data were collected by personal interview on shopping roles, information processing, food stamp and coupon use, store brand purchases, mispricing and product unavailability experiences, and with familiarity with fair trade practices. Implications and directions for further research are suggested. (Author)

  2. The 3D virtual environment online for real shopping

    Khalil, Nahla

    2015-01-01

    The development of information technology and Internet has led to rapidly progressed in e-commerce and online shopping, due to the convenience that they provide consumers. E-commerce and online shopping are still not able to fully replace onsite shopping. In contrast, conventional online shopping websites often cannot provide enough information about a product for the customer to make an informed decision before checkout. 3D virtual shopping environment show great potential for enhancing e-co...

  3. RURAL CUSTOMER SATISFACTION TOWARDS ONLINE SHOPPING IN POLLACHI TALUK

    K. Jayaprakash; A. Pavithra

    2017-01-01

    Online shopping is a recent phenomenon in electronic commerce and its definitely going to be the future of shopping in the world. It is user friendly compare to in store shopping because consumers can just complete his requirements just with a click of mouse without leaving their home. In the present work, the researcher intended to analyze the most preferred online shopping website, factors influencing the rural customers towards online shopping and to analyze the level satisfaction of the ...

  4. Flow shop scheduling with heterogeneous workers

    Benavides, Alexander J.; Ritt, Marcus; Miralles Insa, Cristóbal Javier

    2014-01-01

    We propose an extension to the flow shop scheduling problem named Heterogeneous Flow Shop Scheduling Problem (Het-FSSP), where two simultaneous issues have to be resolved: finding the best worker assignment to the workstations, and solving the corresponding scheduling problem. This problem is motivated by Sheltered Work centers for Disabled, whose main objective is the labor integration of persons with disabilities, an important aim not only for these centers but for any company d...

  5. IS ONLINE GROCERY SHOPPING INCREASING IN STRENGTH?

    Corbett, James J.

    2001-01-01

    Online grocery shopping is a relatively new innovation with regard to the way in which one purchases groceries. Some interesting concepts- designed to enhance the process of making grocery products available for consumption of the ever-changing consumer- have entered the food distribution industry channels. A telephone survey was conducted in the Boston trading area to determine the profile of online grocery consumers who are familiar with online grocery shopping.

  6. Chinese and Finnish Undergraduates’ Online Shopping Behaviour

    Wan, Ning

    2015-01-01

    The main goal of the thesis was to recognise similar and different characteristics of online shopping behaviour between Chinese and Finnish undergraduates. Additionally, this thesis would give meaningful proposals for merchants and managers on offering better online marketing. This thesis report was conducted in both theoretical and practical parts. The theoretical parts include marketing research and online shopping consumption behaviour. The study describes the marketing research progre...

  7. Modelling Electrical Energy Consumption in Automotive Paint Shop

    Oktaviandri, Muchamad; Safiee, Aidil Shafiza Bin

    2018-03-01

    Industry players are seeking ways to reduce operational cost to sustain in a challenging economic trend. One key aspect is an energy cost reduction. However, implementing energy reduction strategy often struggle with obstructions, which slow down their realization and implementation. Discrete event simulation method is an approach actively discussed in current research trend to overcome such obstructions because of its flexibility and comprehensiveness. Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption. Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang. The simulation model was developed using Tecnomatix Plant Simulation software version 13. From the simulation result, the model was accurately within ±5% for energy consumption and ±15% for maximum demand after validation with real system. Two different energy saving scenarios were tested. Scenario 1 was based on production scheduling approach under low demand situation which results energy saving up to 30% on the consumption. Meanwhile scenario 2 was based on substituting high power compressor with the lower power compressor. The results were energy consumption saving of approximately 1.42% and maximum demand reduction about 1.27%. This approach would help managers and engineers to justify worthiness of investment for implementing the reduction strategies.

  8. Coffee Shop As a Media for Self-Actualization Today's Youth

    Salendra Salendra

    2014-07-01

    Full Text Available Trends go to a coffee shop that is currently self-actualization can be a medium for today's youth. In this study, the author uses Dramaturgy Theory introduced by Erving Goffman 1955 in The Presentation of Self in Everyday Life.                This research methods using qualitative methodology and data collection technique was done by observation, interviews and  study by literature. Trends goes to coffee shop by teen nowdays be assumed as teen’s activity to follow modern life style and it does to complete needs of self actualization.             It was concluded that the phenomenon of teenage habit to go to the coffee shop is an adolescent self-actualization behaviors performed by following a growing trend. Dramaturgy Theory discusses the two sides of teenage life in self actualize, front stage of a teenager is a person who has wide connections and likes to follow the trend of going to the coffee shop, and the back stage of the teenager is the pupil / student in an educational institution and a child in a family whose primary job is to learn and serve the elderly.

  9. Hygiene of work in main shops of modern coking by-product industry. [USSR

    Kapitul' skii, V B

    1984-07-01

    The hygiene of working conditions is evaluated and compared for coking by-product industry shops using modern technology and machines with those using obsolete equipment and methods. Most basic factors in contamination of atmosphere of coking, pitch-coking and metal-refining shops are coal and coke dust, carbon monoxide and polycyclic aromatic hydrocarbons, especially carcinogenic benzpyrene. Contamination of air of working zone is determined by details of technology: periodicity or continuity of industrial processes, use of improved equipment for smokeless injection of charge into stoves and of hermetic pipes to remove gas with hydraulically operated caps, position of machines in shops and in coal tar distillation removal of carcinogenic benzpyrene by sulfonation and aeration. In modernized shops of coking by-product industry, illness and loss of work capacity are significantly lower than in plants using obsolete methods and equipment. Measures are presented for hygienic improvement of working conditions; both methods to further increase efficiency of technological processes and methods to protect individual worker on job such as use of respirators, protective clothing, plexiglass shields, shampoos and skin creams. 14 references.

  10. A proposal simulated annealing algorithm for proportional parallel flow shops with separated setup times

    Helio Yochihiro Fuchigami

    2014-08-01

    Full Text Available This article addresses the problem of minimizing makespan on two parallel flow shops with proportional processing and setup times. The setup times are separated and sequence-independent. The parallel flow shop scheduling problem is a specific case of well-known hybrid flow shop, characterized by a multistage production system with more than one machine working in parallel at each stage. This situation is very common in various kinds of companies like chemical, electronics, automotive, pharmaceutical and food industries. This work aimed to propose six Simulated Annealing algorithms, their perturbation schemes and an algorithm for initial sequence generation. This study can be classified as “applied research” regarding the nature, “exploratory” about the objectives and “experimental” as to procedures, besides the “quantitative” approach. The proposed algorithms were effective regarding the solution and computationally efficient. Results of Analysis of Variance (ANOVA revealed no significant difference between the schemes in terms of makespan. It’s suggested the use of PS4 scheme, which moves a subsequence of jobs, for providing the best percentage of success. It was also found that there is a significant difference between the results of the algorithms for each value of the proportionality factor of the processing and setup times of flow shops.

  11. Job Satisfaction

    Administrator

    Job Satisfaction: Rural Versus Urban Primary Health Care Workers'. Perception in ... doing it well, and being suitably rewarded for one's efforts. Several ... community recognition of their work and improved staff relationship. ..... study found important differences about attractors to ... their work, work-life balance, bureaucracy.

  12. Flow shop scheduling decisions through Techniques for Order Preference by Similarity to an Ideal Solution (TOPSIS

    Arun Gupta

    2016-07-01

    Full Text Available The flow-shop scheduling problem (FSP has been widely studied in the literature and having a very active research area. Over the last few decades, a number of heuristic/meta-heuristic solution techniques have been developed. Some of these techniques offer excellent effectiveness and efficiency at the expense of substantial implementation efforts and being extremely complicated. This paper brings out the application of a Multi-Criteria Decision Making (MCDM method known as techniques for order preference by similarity to an ideal solution (TOPSIS using different weighting schemes in flow-shop environment. The objective function is identification of a job sequence which in turn would have minimum makespan (total job completion time. The application of the proposed method to flow shop scheduling is presented and explained with a numerical example. The results of the proposed TOPSIS based technique of FSP are also compared on the basis of some benchmark problems and found compatible with the results obtained from other standard procedures.

  13. Job autonomy and job satisfaction: new evidence

    Taylor, J; Bradley, S; Nguyen, A N

    2003-01-01

    This paper investigates the impact of perceived job autonomy on job satisfaction. We use the fifth sweep of the National Educational Longitudinal Study (1988-2000), which contains personally reported job satisfaction data for a sample of individuals eight years after the end of compulsory education. After controlling for a wide range of personal and job-related variables, perceived job autonomy is found to be a highly significant determinant of five separate domains of job satisfaction (pay, ...

  14. Job Hazard Analysis

    1998-01-01

    .... Establishing proper job procedures is one of the benefits of conducting a job hazard analysis carefully studying and recording each step of a job, identifying existing or potential job hazards...

  15. Shopping online and/or in-store? A structural equation model of the relationships between e-shopping and in-store shopping

    Farag, Sendy; Schwanen, Tim; Dijst, Martin

    2005-01-01

    Searching product information or buying goods online is becoming increasingly popular and could affect shopping trips. However, the relationship between e-shopping and in-store shopping is currently unclear. The aim of this study is to investigate empirically how the frequencies of online searching, online buying, and non-daily shopping trips relate to each other, after controlling for sociodemographic, land use, behavioral, and attitudinal characteristics. Data were collected from 826 respon...

  16. Job sharing as an employment alternative in group medical practice.

    Vanek, E P; Vanek, J A

    2001-01-01

    Although physicians discuss quality-of-life and employment issues with their patients, they often fail to consider flexible scheduling and reduced employment options to lessen their own job stress. We examined one of these options by surveying two community-based, private practice groups with a combined 13-year experience with job sharing. We found that a majority of respondents rated job sharing as successful, and most wanted it to continue. Job sharers derived considerable personal benefit from the arrangement and had significantly more positive attitudes toward work than full-time physicians. Job sharing appeared to have little impact on practice parameters. Dependability, flexibility and willingness to cooperate were the most important attributes in choosing a job-sharing partner. Job sharing is an employment alternative worth exploring to retain physicians in medical group practice.

  17. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners

  18. Science Shops - a concept for community based learning

    Jørgensen, Michael Søgaard; Hende, Merete

    2001-01-01

    Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. The paper is based on an investigation of the impact of science shops on university curricula and research through a questionnaire...... sent out to science shops and through follow-up interviews with employees from nine different university based science shops. These science shops had in the questionnaire indicated that the science shop in one way or the other has had impact on university curricula and/or research. This paper focuses...... on the impact on university curricula. The case studies have been supplemented with articles and reports. The analysis has focused on the kind of impact, which the science shops have reported, and has tried to relate the impact to the local history of the science shop. One direct impact on the curricula...

  19. Supporting the Supermarket Shopping Experience through a Context-Aware Shopping Trolley

    Black, Darren; Clemmensen, Nils Jakob; Skov, Mikael B.

    2009-01-01

    Shopping in the real world is becoming an increasingly interactive experience as stores integrate various technologies to support shoppers. Based on an empirical study of supermarket shoppers, we designed a mobile context-aware system called the Context- Aware Shopping Trolley (CAST). The aim...... of the system is to support shopping in supermarkets through context-awareness and acquiring user attention. Thus, the interactive trolley guides and directs shoppers in the handling and finding of groceries. An empirical evaluation showed that shoppers using CAST adapted in different shopping behavior than...... traditional trolley shoppers by exhibiting a more uniform behavior in terms of product sequence collection and ease of finding products and thus, CAST supported the shopping experience....

  20. [Flexibility competencies: emotional organization management].

    Caballero Muñoz, Domingo; Blanco Prieto, Antonio

    2007-11-01

    The aim of this article is to analyse the transferral of flexibility from contemporary organizations to workers. Through the approach of management by competencies, organizations try to develop in their workers behaviours that are related to efficient job performance. In order to appraise the importance of this approach, we used a critical-rational perspective to discuss the productivity demands that are characteristic of advanced industrial societies. The article shows how the link between workers' flexibility management and their emotional competencies affects their lives, which, like the organizations, should be versatile and adaptable to change.

  1. The design and development of massive BES job submit and management system

    Shi Jingyan; Liang Dong; Sun Gongxing; Chen Gang

    2010-01-01

    The system was designed to provide an easy and efficient way for the physicists to run their physical jobs. The system sends jobs to the different computing backend under the request of the user, besides, the system can monitor the jobs status, re-submit the job automatically. The BES job is the typical data massive calculation. To realize the parallelized job running, the big job was split into many sub-jobs to be run on many worknodes at the same time. Web Service is adopted to provide users flexible interface. (authors)

  2. A New Artificial Immune System Algorithm for Multiobjective Fuzzy Flow Shop Problems

    Cengiz Kahraman

    2009-12-01

    Full Text Available In this paper a new artificial immune system (AIS algorithm is proposed to solve multi objective fuzzy flow shop scheduling problems. A new mutation operator is also described for this AIS. Fuzzy sets are used to model processing times and due dates. The objectives are to minimize the average tardiness and the number of tardy jobs. The developed new AIS algorithm is tested on real world data collected at an engine cylinder liner manufacturing process. The feasibility and effectiveness of the proposed AIS is demonstrated by comparing it with genetic algorithms. Computational results demonstrate that the proposed AIS algorithm is more effective meta-heuristic for multi objective flow shop scheduling problems with fuzzy processing time and due date.

  3. Steve Jobs

    Christensen, Julie Sophie; Nielsen, Jonas; Mørk, Maj Keum Ji Helweg; Mammen, Diana; Kristiansen, Mikkel Vestergaard; Welch, Nadia Guldbæk

    2013-01-01

    Apple is perhaps today one of the most successful technological brands on the market. This company has introduced various products to the consumers, which in a relatively short time has managed to establish a world wide trend based on a functional and aesthetic design. In this project, the primary interest lies in how Apple has achieved this kind of success revolved around the late founder Steve Jobs, who undoubtedly appears as one of the central figures in creating the status that Apple has ...

  4. Urban artisanal gold shops and mercury emissions

    Cordy, P.; Veiga, M.; Carrasco, V.H.G.

    2008-01-01

    Artisanal miners in developing countries use mercury amalgamation processes to extract gold. The amalgams are then refined before being sold on to urban gold shops. The amalgams can often contain between 2 to 40 per cent mercury. Unburned amalgams are also often sold directly to gold shops. There are serious health risks for shop employees and nearby populations when the gold is melted and further purified. Studies have shown that mercury concentrations in the ambient air of gold shops often exceeds World Health Organization (WHO) limits by an order of magnitude or more. This study examined the practices and technologies used to refine gold in Latin America and Indonesia. The study compared and contrasted various refining methods and their resulting mercury emissions. Methods of reducing mercury emissions were also investigated, including a filtration system designed to capture 80 per cent of mercury emissions. Barriers to implementing mercury emissions reduction plans were also investigated. It was concluded that the design of urban gold shops must include condensers, fume hoods, and efficient mercury capture systems. 15 refs

  5. Digitalization influence on shopping centers strategic management

    Ioniţă Irene Mihaela

    2017-07-01

    Full Text Available Shopping centers are an important aspect of the extremely dynamic life of the 21st century consumer. Nowadays, worldwide, shopping centers represent significant multimillion euro investments, remarking themselves with bold architectures and structures and an individual brand image. Retail markets are currently under transformation by a confluence of new retailing technologies, dramatic shifts in the demographic profile and preferences of more affluent and educated shoppers. Part of the market share in modern retail moved to new forms of selling, which weakened the offer of some traditional retailers, while also creating opportunities for retailers to move and integrate their offerings with new digital tools (via electronic commerce, social commerce and mobile commerce. Meeting customer needs and increasing sales are the primary drivers behind retailers use of information systems and technology (IS/IT. New developments in IS/IT offer new opportunities and challenges for organizations and society. The current paper proposes to analyze the way digital media and information technology (computers and mobile devices influences the virtual and physical shopping experiences, and shopping centers management consequently. The need for communication & sales channels integration, the impact of new information technologies (IT’s, the growing role of social / digital media, the balance between personalization and privacy – all represent challenges retail industry needs to currently adapt to face digitalization. E-commerce is transforming both consumer behavior and retailing business models, by greatly expanding shopping convenience, selection and affordability.

  6. 网上商店经营管理实践教学的研究与分析%A Research on Online Shop Operation Management Experimental Learning

    王伟; 梁春晶

    2012-01-01

    Along with e-commerce's entering in people's life,online operation has become a key link and measure of business marketing.Through experiments of operating online shops,students could participate in enterprise management as practitioners,thus enhance their understanding to the theoretical knowledge of e-commerce.With teachers' guidance,students could learn to select online shop projects;apply innovation theory into the practice of online shop operation,taking full use of online marketing and their professional superiority;make flexible use of a variety of online marketing strategies;get to knowthe special pioneering work model given by this peculiar development period of network time,so as to accumulate valuable experience for their future job.This also helps lay a solid,theoretical and practical foundation for the exploration of e-commerce teachingmodel.%随着电子商务走进人们的生活,网络经营已成为企业营销管理中的一个重要环节和手段。学生通过网上商店经营管理的实践,可以以一个从业者的角度参与企业的运营,从而增强对电子商务专业的理论知识的理解。通过指导学生网店经营项目的选择,充分利用网络营销并结合专业的优势,把创新理论应用于网店经营的实践,让学生能够根据经营实际灵活地运用各种网络营销策略,认识到网络时代发展的特殊时期所赋予的特殊创业模式,为学生就业、创业提供宝贵经验,并为电子商务教学探讨新的模式打下坚实的理论和实践基础。

  7. Limited access: gender, occupational composition, and flexible work scheduling.

    Glauber, Rebecca

    2011-01-01

    The current study draws on national data to explore differences in access to flexible work scheduling by the gender composition of women's and men's occupations. Results show that those who work in integrated occupations are more likely to have access to flexible scheduling. Women and men do not take jobs with lower pay in return for greater access to flexibility. Instead, jobs with higher pay offer greater flexibility. Integrated occupations tend to offer the greatest access to flexible scheduling because of their structural locations. Part-time work is negatively associated with men's access to flexible scheduling but positively associated with women's access. Women have greater flexibility when they work for large establishments, whereas men have greater flexibility when they work for small establishments.

  8. English Shop Signs and Brand Names

    Parvaneh Khosravizadeh

    2016-07-01

    Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

  9. Attitudinal Explanation on Virtual Shopping Intention

    Ritzky Karina M.R. Brahmana

    2014-08-01

    Full Text Available Abstract. Virtual stores provide great efficiency in the retail value chain, and their existence has tremendously paved the way for electronic commerce. Understanding the intention of consumers to shop online in attitudinal perspective will provide important contribution to the area of e-commerce. This research proposes Task Technology Fit, Perceived Ease of Use (PEoU, and Perceived Usefulness (PU as the factors that drive consumers’ intention. The results from our survey study of 310 online consumers in Indonesia indicate that TTF affects PEoU and PU significantly. Our hierarchical model also reports that PEoU is the mediating effect on the relationship between TTF and Intention. The resulting model explains a large portion of the factors that lead a user’s behavioural intention to use a virtual shop. Keywords : Attitudinal, Task Technology Fit, Perceived Ease of Use, Perceived Usefulness, Retail, Virtual Shopping Intention

  10. Women who doctor shop for prescription drugs.

    Worley, Julie; Thomas, Sandra P

    2014-04-01

    Doctor shopping is a term used to describe a form of diversion of prescription drugs when patients visit numerous prescribers to obtain controlled drugs for illicit use. Gender differences exist in regard to prescription drug abuse and methods of diversion. The purpose of this phenomenological study guided by the existential philosophy of Merleau-Ponty was to understand the lived experience of female doctor shoppers. Interviews were conducted with 14 women, which were recorded, transcribed, and analyzed. Included in the findings are figural aspects of the participants' experience of doctor shopping related to the existential grounds of world, time, body, and others. Four themes emerged from the data: (a) feeding the addiction, (b) networking with addicts, (c) playing the system, and (d) baiting the doctors. The findings suggest several measures that nurses can take to reduce the incidence of doctor shopping and to provide better care for female doctor shoppers.

  11. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    Carolyn Chin

    2005-11-01

    Full Text Available Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is needed for a successful ‘shopping experience’ online and what the possible obstacles or pitfalls along the way might be. We initially introduce the concepts of virtual presence (the sense of ‘being there’ and virtual reality, discussing the possible roles both can play in providing a solution to the problem of effective online shopping. We then consider the Experience Economy, a concept which encapsulates many of the issues related to the problem of online shopping and which suggests ways in which online retailers can enhance the effectiveness of their sites by means of a virtual ‘experience’. Having set the scene for online shopping, we discuss eTailing today in terms of direct product experience and the opportunities which cyber-shopping offers to replicate this process. Finally, we identify some of the possibilities and problems of online shopping today, illustrating the current status of virtual presence in retailing with two micro-cases of success and failure.

  12. Doctor and pharmacy shopping for controlled substances.

    Peirce, Gretchen L; Smith, Michael J; Abate, Marie A; Halverson, Joel

    2012-06-01

    Prescription drug abuse is a major health concern nationwide, with West Virginia having one of the highest prescription drug death rates in the United States. Studies are lacking that compare living subjects with persons who died from drug overdose for evidence of doctor and pharmacy shopping for controlled substances. The study objectives were to compare deceased and living subjects in West Virginia for evidence of prior doctor and pharmacy shopping for controlled substances and to identify factors associated with drug-related death. A secondary data study was conducted using controlled substance, Schedule II-IV, prescription data from the West Virginia Controlled Substance Monitoring Program and drug-related death data compiled by the Forensic Drug Database between July 2005 and December 2007. A case-control design compared deceased subjects 18 years and older whose death was drug related with living subjects for prior doctor and pharmacy shopping. Logistic regression identified factors related to the odds of drug-related death. A significantly greater proportion of deceased subjects were doctor shoppers (25.21% vs. 3.58%) and pharmacy shoppers (17.48% vs. 1.30%) than living subjects. Approximately 20.23% of doctor shoppers were also pharmacy shoppers, and 55.60% of pharmacy shoppers were doctor shoppers. Younger age, greater number of prescriptions dispensed, exposure to opioids and benzodiazepines, and doctor and pharmacy shopping were factors with greater odds of drug-related death. Doctor and pharmacy shopping involving controlled substances were identified, and shopping behavior was associated with drug-related death. Prescription monitoring programs may be useful in identifying potential shoppers at the point of care.

  13. Shopping intention prediction using decision trees

    Šebalj, Dario; Franjković, Jelena; Hodak, Kristina

    2017-01-01

    Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer.Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they inten...

  14. Store Location in Shopping Centers: Theory & Estimates

    Kerry D. Vandell; Charles C. Carter

    2000-01-01

    This paper develops a formal theory of store location within shopping centers based on bid rent theory. The bid rent model is fully speci?ed and solved with the objective function of pro?t maximization in the presence of comparative, multipurpose and impulse shopping behavior. Several hypotheses result about the optimal relationships between store types, sizes, rents, sales, and distances from the mall center. The hypotheses are tested and con?rmed using data from a sample of 689 leases in ei...

  15. The impact of science shops on university research and education

    Hende, Merete; Jørgensen, Michael Søgaard

    This report discusses the impact from university-based science shops on curricula and research. Experience from science shops show that besides assisting citizen groups, science shops can also contribute to the development of university curricula and research. This impact has been investigated...... through the SCIPAS questionnaire sent out to science shops and through follow-up interviews with employees from nine different university-based science shops and one university researcher. Not all the cases call themselves science shops, but in the report the term 'science shop' will be used most...... way or the other has had impact on university curricula and/or research. The analysis and the case studies have theoretically been based on literature on universities and education and research as institutions and a few articles about the impact of science shops on education and research. The analysis...

  16. Informal sector shops and AIDS prevention An exploratory social ...

    Informal sector shops and AIDS prevention An exploratory social marketing ... The existence of a variety of media and interpersonal information sources on the ... shops should be further investigated as avenues for AIDS prevention efforts.

  17. Gender differences and job stress management techniques of library ...

    This study aimed at ascertaining gender and work related stress among library ... library staff indicated non-conducive work environment as the cause of job stress. ... flexible work hours and developing healthy life styles as management tips.

  18. Workplace flexibility.

    Scordato, C; Harris, J

    1990-01-01

    Whether your organization is in a growth pattern or downsizing, you are probably facing change. To gain some insight into your options, here is an in-depth look at the problems and benefits of some flexible work arrangements from a just published study by Catalyst.

  19. Flexibility conflict?

    Delsen, L.W.M.; Bauer, F.; Groß, H.; Sieglen, G.

    2002-01-01

    The chapter deals with the presupposed conflict of interests between employers and employees resulting from a decoupling of operating hours and working times. It starts from the notion that both long operating hours and flexibility are relative concepts. As there is some discretion, the ultimate

  20. Marketing activities of vape shops across racial/ethnic communities

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

    2017-01-01

    INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by...

  1. Growing Shopping Malls and Behavior of Urban Shoppers

    Rajagopal

    2009-01-01

    Shopping malls contribute to business more significantly than traditional markets which were viewed as simple convergence of supply and demand. Shopping malls attract buyers and sellers, and induce customers providing enough time to make choices as well as a recreational means of shopping. However, competition between malls, congestion of markets and traditional shopping centers has led mall developers and management to consider alternative methods to build excitement with customers. This stu...

  2. Consumer Buying Behavior Towards Online Shopping Stores in Malaysia

    Mehrdad Salehi

    2011-01-01

    The Internet as a global medium is quickly gaining interest and attractiveness as the most revolutionary marketing tool. The global nature of communication and shopping has as well redefined, seeing that it is the perfect vehicle for online shopping stores. Online convenient shop is mostly reflected in shorter time and less energy spent, including shipping cost reduction, less crowd and queues than real markets, unlimited time and space, which all increase convenience of shopping. Internet sh...

  3. End-user Acceptance of Online Shopping Sites in India

    Bolar K; Shaw B

    2015-01-01

    Online shopping sites have recently gained momentum in India. Since the ecommerce industry is in infancy state, customer (end user) satisfaction with the online shopping is the prime concern because decreasing customer satisfaction leads to negative electronic word of mouth (eWOM) which is very severe for the business. Through a dataset gathered from 127 online shopping customers in with respect to online shopping sites in India, this study investigates the role of website quality, informatio...

  4. What do we know about consumer m-shopping behaviour?

    Marriott, Hannah; Williams, Michael; Dwivedi, Yogesh

    2017-01-01

    Purpose – This paper provides a review of mobile shopping (m-shopping) acceptance literature to bring international marketing and consumer research attention to m-shopping acceptance factors and limitations in current understandings to propose recommendations for further academic and retailing attention.\\ud Design/methodology – Keyword searches identified consumer-focused literature across mobile commerce, mobile shopping, mobile browsing, and mobile purchasing, published in English language ...

  5. Controlling flow time delays in flexible manufacturing cells

    Slomp, J.; Caprihan, R.; Bokhorst, J. A. C.

    2009-01-01

    Flow time delays in Flexible Manufacturing Cells (FMCs) are caused by transport and clamping/reclamping activities. This paper shows how dynamic scheduling parameters may control the flow times of jobs and the available task windows for flow time delays.

  6. A Local Search Algorithm for the Flow Shop Scheduling Problem with Release Dates

    Tao Ren

    2015-01-01

    Full Text Available This paper discusses the flow shop scheduling problem to minimize the makespan with release dates. By resequencing the jobs, a modified heuristic algorithm is obtained for handling large-sized problems. Moreover, based on some properties, a local search scheme is provided to improve the heuristic to gain high-quality solution for moderate-sized problems. A sequence-independent lower bound is presented to evaluate the performance of the algorithms. A series of simulation results demonstrate the effectiveness of the proposed algorithms.

  7. WP 121 - Occupational segregation and gender inequality in job quality

    Haya Stier; Yaish, M. (Meir)

    2012-01-01

    We examine gender differences in perceived quality of employment (achievement, content, job insecurity, job flexibility, and physical and emotional conditions). We ask whether women’s occupations provide better conditions in areas that facilitate their dual role in society, such as flexible working schedule, as a tradeoff for low monetary rewards. Specifically, we examine how closely women’s concentration in broader occupational categories, embedded in particular national contexts, is associa...

  8. An architecture for agile shop floor control systems

    Langer, Gilad; Alting, Leo

    2000-01-01

    as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

  9. A multipurpose shopping trip model to assess retail agglomeration effects

    Arentze, T.A.; Oppewal, H.; Timmermans, H.J.P.

    2005-01-01

    Multipurpose shopping is a prominent and relevant feature of shopping behavior. However, no methodology is available to assess empirically how the demand for multipurpose shopping depends on retail agglomeration or, in general, the characteristics of retail supply, such as the numbers and types of

  10. Effects of time of day on shopping behavior.

    Chebat, J C

    1999-04-01

    Shoppers interviewed in a shopping mall at different times of the day show different activities within the mall and attitudes toward the products. Prices also vary with the time of the day. These results can be explained in terms of shopping values and the related demographic characteristics of the population visiting the shopping center at different times of the day.

  11. Turning shopping habits of young consumers into green

    Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

    2014-01-01

    Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

  12. Tourist shopping behavior in a historic downtown area

    Kemperman, A.D.A.M.; Borgers, A.W.J.; Timmermans, H.J.P.

    2009-01-01

    Shopping is one of the most important activities for tourists. The purpose of this study is to describe and predict tourist shopping route choice behavior in a downtown historic center. Reported routes of tourists in the downtown shopping area of Maastricht, located in the Southern part of the

  13. What drives people? Analyzing leisure-shopping trip decision making

    de Ceunynck, T.; Kusumastuti, Diana; Hannes, E.; Janssens, D.; Wets, G.

    2011-01-01

    Because of the strong increase in the number of leisure-shopping trips, a shift towards more sustainable leisure-shopping behaviour is desirable. This can be attained by having a better insight into people’s reasoning in choosing a transport mode and shopping location for this type of activities.

  14. Internet Shopping Behavior of College of Education Students

    Kiyici, Mubin

    2012-01-01

    Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

  15. Online versus conventional shopping: Consumers' risk perception and regulatory focus

    van Noort, G.; Kerkhof, P.; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  16. Online versus Conventional Shopping: Consumers' Risk Perception and Regulatory Focus

    van Noort, Guda; Kerkhof, Peter; Fennis, B.M.

    2007-01-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a

  17. The Paradox of Falling Job Satisfaction with Rising Job Stickiness in the German Nursing Workforce Between 1990 and 2013

    Alameddine, Mohamad; Bauer, Jan Michael; Richter, Martin

    2017-01-01

    Background: Literature reports a direct relation between nurses' job satisfaction and their job retention (stickiness). The proper planning and management of the nursing labor market necessitates the understanding of job satisfaction and retention trends. The objectives of the study are to identify...... trends in, and the interrelation between, the job satisfaction and job stickiness of German nurses in the 1990-2013 period using a flexible specification for job satisfaction that includes different time periods and to also identify the main determinants of nurse job stickiness in Germany and test...... whether these determinants have changed over the last two decades. Methods: The development of job stickiness in Germany is depicted by a subset of data from the German Socio-Economic Panel (1990-2013), with each survey respondent assigned a unique identifier used to calculate the year-to-year transition...

  18. Retail environments and spatial shopping behavior

    Timmermans, H.J.P.; Gaerling, T.; Golledge, R.G.

    1993-01-01

    The interplay between aspects of retail environments and consumer spatial shopping behavior has traditionally been an area of major concern in geography, urban planning and related disciplines. It reflects an interest in explaining the relationship between locational and nonlocational attributes of

  19. Architectural Considerations for Holonic Shop Floor Control

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    of the HMS concept, followed by an investigation regard-ing the development of shop floor control architectures. This will include a summary of the ongoing research on HMS, and current results regarding the development of a holonic SFC architecture in a cellular manufacturing perspective. The paper...

  20. 77 FR 56552 - Holiday Mobile Shopping Promotion

    2012-09-13

    ... POSTAL SERVICE 39 CFR Part 111 Holiday Mobile Shopping Promotion AGENCY: Postal Service \\TM... Postal Service, Domestic Mail Manual (DMM[supreg]) 709.3 to add a new temporary promotion during November... Promotion (``Promotion''), which will take place between November 7, 2012 and November 21, 2012 (``promotion...

  1. CONSUMIDOR ADOLESCENTE EM AMBIENTE DE SHOPPING CENTER

    Lunie Imamura Lima

    2009-07-01

    shopping center da cidade de Fortaleza (CE e objetivou conhecer as características bio-demográficas, os hábitos de utilização do shopping e os principais elementos influenciadores do processo de decisão de compra deste segmento. De natureza descritiva, quantitativa, com corte transversal; a pesquisa utilizou um questionário estruturado aplicado a uma amostra não-probabilística por conveniência, com maioria do sexo masculino, faixa etária entre 13 e 15 anos, provenientes de famílias de classe alta e renda familiar mensal superior a R$ 2700,00. Os resultados demonstraram que a maioria dos respondentes recebe mesada no valor menor que R$ 80,00; vai ao shopping de carro com pais ou parentes; gasta de R$ 10,00 a R$ 30,00; freqüenta o local 3 vezes na semana; permanece de 4 a 6 horas e é acompanhado pelos amigos. Ainda mostrou que pais ou familiares são os principais elementos influenciadores do processo de decisão de compra, enquanto os amigos os principais meios de informações sobre novos produtos. O estudo pretende contribuir com a literatura científica nas áreas de Marketing e Comportamento do consumidor e servir de instrumento gerencial aos dirigentes de shopping centers.

  2. 30 CFR 57.4761 - Underground shops.

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and... toxic gases from a fire originating in an underground shop where maintenance work is routinely done on...

  3. Informal sector shops and AIDS prevention

    1991-04-20

    Apr 20, 1991 ... marketing goals go beyond information transfer and focus on behaviour .... thought their shop could do to help to inform the people in their area about AIDS. ..... history of residents of the shack area of Khayelitsha. Occasional ...

  4. The Great Irish Head Shop Controversy

    Ryall, Graham; Butler, Shane

    2011-01-01

    This research describes and analyses recent policy developments in Ireland in relation to the practice of selling psychoactive substances which, while not themselves illegal, mimic the effects of commonly used illegal drugs. These so-called "legal highs" had been sold in Ireland through an increasing number of "head shops"…

  5. Shopping for Courses on the Mall.

    Gallagher, John C.

    1980-01-01

    Describes an extension program conducted by Suffolk County Community College, New York, at an area shopping mall. Discusses program offerings, including a series of general interest lectures, regular credit courses, and a set of noncredit minicourses for mall employees. Examines the public relations value of the extension efforts. (JP)

  6. Indices of pedestrian behavior in shopping areas

    Borgers, A.; Timmermans, H.

    2014-01-01

    A number of indices to describe and compare sets of pedestrian routes in shopping environments will be introduced. The first set of indices is related to characteristics of the trajectories and the second set to visiting outlets. These statistics can be used to assess the performance of models

  7. Secret Shopping as User Experience Assessment Tool

    Boyce, Crystal M.

    2015-01-01

    Secret shopping is a form of unobtrusive evaluation that can be accomplished with minimal effort, but still produce rich results. With as few as 11 shoppers, the author was able to identify trends in user satisfaction with services provided across two entry-level desks at Illinois Wesleyan University's The Ames Library. The focus of this secret…

  8. Designing a Shopping System for Senior Citizens

    Roman, Harry T.

    2010-01-01

    It is all about serving the customer. That is how capitalism plays out. It finds a market need and then creates a product or service to address that need. The Baby Boomer generation, all 76 million, will be retiring soon. Eventually, some may find it very hard to move about and do their routine food shopping. In this article, the author's…

  9. Commuter Shopping : A study in understanding commuting in the context of shopping

    Andersson, Åsa; Skoog, Sara; Svensson, Johanna

    2014-01-01

    Background For ages people have commuted to work, or to other activities, located outside their home municipality. Statements found indicate that the basic decision for commuting are based on utility maximisation and no matter what the character of the benefit is; it should be higher than what can be found closer to the home location. This thesis aims to investigate if people are also commuting with the purpose of obtaining benefits from shopping. The shopping location will in this thesis be ...

  10. Why Shops Close Again : An Evolutionary Perspective on the Deregulation of Shopping Hours

    Kosfeld, M.

    1999-01-01

    This paper introduces a new perspective on the deregulation of shopping hours based on ideas from evolutionary game theory. We study a retail economy where shopping hours have been deregulated recently. It is argued that first, the deregulation leads to a coordination problem between store owners and customers, and second, the ‘solution’ to this problem depends on the specific cost structure of stores and the preferences of customers. In particular, it may happen that, even if extended shoppi...

  11. Integration of Learning and Practice for Job Sharing Partnerships

    Dixon-Krausse, Pamela Marie

    2007-01-01

    This paper explores the forces that support the proliferation of the flexible work arrangement called job sharing. Moreover, the paper will illuminate the need for integrating learning and practice as a way to develop and support job sharing partners, or "Partners in Practice" (PiPs). The author puts forth a model derived from learning in…

  12. Conditions for low stress-risk jobs: Europe's case

    Oeij, P.R.A.; Dhondt, S.; Wiezer, N.

    2006-01-01

    The European situation of new forms of work organisation and stress risks in jobs are described against the ‘decentralisationhuman factor orientation model’, which discerns types of work organisation. ‘Flexible firms’ based on lean production have the highest probability of high strain jobs,

  13. Flexible licensing

    Martyn Jansen

    2012-07-01

    Full Text Available The case is presented for a more flexible approach to licensing online library resources. Today's distributed education environment creates pressure for UK higher and further education institutions (HEI/FEIs to form partnerships and to develop educational products and roll them out across the globe. Online library resources are a key component of distributed education and yet existing licensing agreements struggle to keep pace with the increasing range of users and purposes for which they are required. This article describes the process of developing a flexible approach to licensing and proposes a new model licence for online library resources which has the adaptability needed in this new global educational landscape. These ideas have been presented and discussed at various workshops across Eduserv's and JISC Collections' higher education and publisher communities, and further consultation is ongoing.

  14. Possible Opioid Shopping and its Correlates.

    Walker, Alexander M; Weatherby, Lisa B; Cepeda, M Soledad; Bradford, Daniel; Yuan, Yingli

    2017-11-01

    We created an operational definition of possible opioid shopping in US commercial health insurance data and examined its correlates. The population consisted of 264,204 treatment courses in persons with a fill for an opioid or diuretic prescription in 2012 and a second within 18 months. We examined counts of prescribers and pharmacies and the numbers of fills and overlaps for ability to discriminate courses of opioids from diuretics, which were a negative control. The most discriminatory measure, indicating possible shopping behavior, was cross-tabulated against other prescriptions filled and diagnoses as found in insurance claims. The associations between claims characteristics and shopping behavior were assessed in a logistic regression. A definition that classified possible "moderate" or "extensive" shopping when a person obtained drug through at least 3 practices and at least 3 pharmacies over 18 months was highly discriminatory between opioid and diuretic treatment. Overlaps between fills and number of fills did not improve the discrimination. Data from insurance claims strongly predicted moderate-to-extensive levels of possible shopping (c=0.82). Prominent among 20 significant predictors were: state of residence; amount of opioid dispensed; self-payment; use of nonspecialist prescribers; high use of anxiolytics, hypnotics, psychostimulants, and antipsychotics; and use of both immediate release and extended-release or long-acting opioids. The use of ≥3 prescribing practices and ≥3 dispensing pharmacies over 18 months sharply discriminated courses of opioid treatment from courses of diuretics. This pattern of fills was additionally associated with the numbers of nonspecialist and self-paid fills, the total morphine milligram equivalents dispensed, and heavier use of drugs for anxiety, sleep, attention, and psychosis.

  15. [Relationships among job rotation perception and intention, job satisfaction and job performance: a study of Tainan area nurses].

    Pan, Yueh-Chiu; Huang, Pei-Wen; Lee, Jin-Chuan; Chang, Ching-Lu

    2012-04-01

    There have been major changes to the medical care system and heightened standards for quality in the nursing profession in recent decades. Multifunctional capabilities are closely related to individual working attitudes, and work satisfaction directly affects group performance. Hospital administrators increasingly expect to utilize nursing staffs flexibly in terms of working hours and shift rotation assignments. This study addresses the need to provide appropriate educational training to nurses and effectively delegate and utilize human resources in order to help nurses adapt to the rapidly changing medical environment. This study on nursing staff in Tainan area explored the relationships between job rotation, work performance and satisfaction. We used a questionnaire sampling method to survey nurses working in the Tainan area of southern Taiwan. Subjects were volunteers and a total 228 valid questionnaires (99.13%) were returned out of a total 230 sent. Both job satisfaction and performance correlated positively with job rotation perception and intention; Job satisfaction and job performance were positively related; Job satisfaction was found to affect work performance via job rotation perception and intention. This study found the hospital nursing staff rotation plan to be an effective management method that facilitates social evolution to increase positive perceptions of work rotation. Nursing staffs thus become more accepting of new positions that may enhance job satisfaction.

  16. Overcoming job stress

    ... medlineplus.gov/ency/patientinstructions/000884.htm Overcoming job stress To use the sharing features on this page, ... stay healthy and feel better. Causes of Job Stress Although the cause of job stress is different ...

  17. Physicians' Job Satisfaction.

    AmL

    doctors and retention of the existing doctors, in addition to the ... an employee's well-being Examples of job resources are job ..... increase physician job satisfaction for ensuring the .... both pay and benefits physicians at private hospitals.

  18. Second Job Entrepreneurs.

    Gruenert, Jeffrey C.

    1999-01-01

    Data from the Current Population Survey reveal characteristics of second-job entrepreneurs, occupations in which these workers hold their second jobs, and the occupational and earnings relationships between their second and primary jobs. (Author)

  19. Shop stewards' learning and union strategies

    Warring, Niels

    2007-01-01

    In Denmark the trade unions have well established educational systems providing the shop stewards with a variety of competencies. Union courses have been analysed focusing on shop stewards' satisfaction with the content and the practical impact of the courses. However, little attention has been...... different theoretical traditions: Shop steward's learning is situational, relational and cross-contextual. Shop stewards' learning is lifelong and life wide. And shop stewards' learning is closely connected to the development of the labour market and not least the unions' priorities, interpretation...

  20. Online versus conventional shopping: consumers' risk perception and regulatory focus.

    van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

    2007-10-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

  1. Job burnout.

    Maslach, C; Schaufeli, W B; Leiter, M P

    2001-01-01

    Burnout is a prolonged response to chronic emotional and interpersonal stressors on the job, and is defined by the three dimensions of exhaustion, cynicism, and inefficacy. The past 25 years of research has established the complexity of the construct, and places the individual stress experience within a larger organizational context of people's relation to their work. Recently, the work on burnout has expanded internationally and has led to new conceptual models. The focus on engagement, the positive antithesis of burnout, promises to yield new perspectives on interventions to alleviate burnout. The social focus of burnout, the solid research basis concerning the syndrome, and its specific ties to the work domain make a distinct and valuable contribution to people's health and well-being.

  2. Job Surfing: Move On to Move Up.

    Martin, Justin

    1997-01-01

    Looks at the process of switching jobs and changing careers. Discusses when to consider options and make the move as well as the need to be flexible and open minded. Provides a test for determining the chances of promotion and when to move on. (JOW)

  3. Job Security, Technical Innovation and Productivity

    Peters, E. Bruce

    1978-01-01

    Analyzes both the management practices of Robert Owen during the early 1800's and current examples of management practices to provide insight into the questions of what bars adoption of better technology and what is the key to greater organizational flexibility and productivity; concludes that ensuring job security at the management level would…

  4. Job and Work Design

    Van den Broeck, Anja; Parker, Sharon K.

    2017-01-01

    Job design or work design refers to the content, structure, and organization of tasks and activities. It is mostly studied in terms of job characteristics, such as autonomy, workload, role problems, and feedback. Throughout history, job design has moved away from a sole focus on efficiency and productivity to more motivational job designs, including the social approach toward work, Herzberg’s two-factor model, Hackman and Oldham’s job characteristics model, the job demand control model of Kar...

  5. Occupational segregation and gender inequality in job quality: a multi-level approach

    Stier, H.; Yaish, M.

    2012-01-01

    We examine gender differences in perceived quality of employment (achievement, content, job insecurity, job flexibility, and physical and emotional conditions). We ask whether women’s occupations provide better conditions in areas that facilitate their dual role in society, such as flexible working

  6. Breaking Out of the Local: International dimensions of science shops

    Caspar DeBok

    2008-09-01

    Full Text Available In this article we want to give an overview of the international dimension and the interest of the European Union (EU in the concept of Science Shops. The European Commission (EC manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science Shop. Detailed information about the Science Shop concept can be found at the Living Knowledge website (www.livingknowledge.org. Living Knowledge represents the international Science Shop Network. In this article international developments of the Science Shop Network, like the project TRAMS, and Science Shop backgrounds will be linked with past and new EU policies like the EU 7th Framework Programme for Research. It shows how community-based research does not only have a local dimension. The international Science Shop activities show the strengths of international cooperation to break out of the local and to bring local issues on the international agenda. Detailed information about the Science Shop concept and daily routines of a Science Shop can be found at the Living Knowledge website (www.livingknowledge.org, e.g. at the FAQ section and in the toolbox.

  7. An Exploratory Analysis of Online Shopping Behavior in Turkey

    Adnan Veysel Ertemel

    2017-06-01

    Full Text Available Alongside the technologic developments, transformation in user behavior and business models has been observed. New areas and models are emerged in a lot of grounds like the communication of people or daily activities. So a new face put for shopping behavior by the e-commerce, which is one of the novelties. This study tries to research online shopping behavior in Turkey. With a quantitative research, device usage, the reasons behind to shop or not to shop online, online shopping category and e-commerce site preferences, payment methods, international e-commerce and online marketplace usage is investigated. As implications of the research, “saving time“ is found to be the foremost reason for shopping online in Turkey and “travel and bookings” category is found as the most shopped category among the results of the survey.

  8. Cross-border shopping and tourism destination marketing

    Makkonen, Teemu

    2016-01-01

    This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated......-border shopping into tourism destination marketing strategies. The results have wider relevance for other border regions.......This article addresses the economic impact that cross-border shopping has on the local tourism industry and the ways that cross-border shopping is taken advantage of in tourism destination marketing. Southern Jutland–situated in Denmark just north of the German border, where border shops situated...... just south of the same border enable Danes to capitalize on the lower value added tax levels in Germany–is utilized as an illustrative case example. The data was collected by analysing the relevant tourism destination marketing material and via interviews with local destination marketing organizations...

  9. Marketing activities of vape shops across racial/ethnic communities.

    Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

    2016-01-01

    There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

  10. Interviewing for a Job. The Wisconsin Guide to Local Curriculum Improvement in Industrial Education, K-12.

    Ritz, John M.

    The intent of this field tested instructional package is to provide the student with an overview of the management element of industry and how it relates to the duties of a shop foreman. Defining behavioral objectives, the course description includes an information section, classroom activities, sample job application forms, and student evaluation…

  11. 78 FR 13086 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Job Clubs...

    2013-02-26

    ... church ministries; volunteer-run networking groups that meet at coffee shops or public libraries; and online networking sites such as LinkedIn. There have been past evaluations of the effects of job clubs... Policy, U.S. Department of Labor. [FR Doc. 2013-04391 Filed 2-25-13; 8:45 am] BILLING CODE 4510-23-P ...

  12. Functional flexibility good for skills development

    Houtman, I.L.D.

    2004-01-01

    Functional flexibility, making optimal use of the employee’s capacity to perform different tasks, is positively related to skills development and involvement in decision-making. It may lead to emotional exhaustion, however, if an imbalance exists, such as high job demands combined with a lack of

  13. Flexible Consumption

    Holm Jacobsen, Peter; Pallesen, Trine

    This report presents the first findings from our qualitative study of consumer behaviour vis-à-vis flexible consumption. The main of objective of this report is to present our first round of data from Bornholm, and to assist the design of products/services designed in WP6. In the report, we adopt...... the perspective of the consumer: what does living in a demand response setup look like to participants – and what kinds of behaviour and interest motivate – and emerge from – their participation in EcoGrid 2.0....

  14. Flexible Capitalism

    Approaching “work” as at heart a practice of exchange, this volume explores sociality in work environments marked by the kind of structural changes that have come to define contemporary “flexible” capitalism. It introduces anthropological exchange theory to a wider readership, and shows how...... the perspective offers new ways to enquire about the flexible capitalism’s social dimensions. The essays contribute to a trans-disciplinary scholarship on contemporary economic practice and change by documenting how, across diverse settings, “gift-like” socialities proliferate, and even sustain the intensified...

  15. The Effects of Shopping Orientations, Consumer Innovativeness, Purchase Experience, and Gender on Intention to Shop for Fashion Products Online

    Ratih Puspa Nirmala

    2011-02-01

    Full Text Available Nowadays, many fashion retailers or marketers use the power of internet to promote and sell their products. This research examines the effects of consumers’ shopping orientations (brand/fashion consciousness, shopping enjoyment, price consciousness, convenience/time consciousness, shopping confidence, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender on consumers’ intention to shop for fashion products online. Data were collected through online surveys from the population of internet users in Indonesia, aged between 15 and 30 years old (generation Y, who had bought or browsed fashion products through the internet (N=210. This research is a quantitative research which uses purposive sampling and multiple regression analysis. Results show that the effects of several shopping orientations (shopping enjoyment, price consciousness, in-home shopping tendency, consumer innovativeness, online purchase experience for fashion products, and gender, are significant on consumers’ intention to shop for fashion products online. Furthermore, gender is marginally significant related to consumers’ intention to shop for fashion products online. Surprisingly, women tend to have lower intentions to shop for fashion products online compared to men.

  16. Flexibility in fuel manufacturing

    Reparaz, A.; Stavig, W.E.; McLees, R.B.

    1987-01-01

    From its inception Exxon Nuclear has produced both BWR and PWR fuels. This is reflected in a product line that, to date, includes over 20 fuel designs. These range from 6x6 design at one end of the spectrum to the recently introduced 17x17 design. The benefits offered include close tailoring of the fuel design to match the customer's requirements, and the ability to rapidly introduce product changes, such as the axial blanket design, with a minimal impact on manufacturing. This flexibility places a number of demands on the manufacturing organization. Close interfaces must be established, and maintained, between the marketing, product design, manufacturing, purchasing and quality organizations, and the information flows must be immediate and accurate. Production schedules must be well planned and must be maintained or revised to reflect changing circumstances. Finally, the manufacturing facilities must be designed to allow rapid switchover between product designs with minor tooling changes and/or rerouting of product flows to alternate work stations. Among the tools used to manage the flow of information and to maintain the tight integration necessary between the various manufacturing, engineering and quality organizations is a commercially available, computerized planning and tracking system, AMAPS. A real-time production data collection system has been designed which gathers data from each production work station for use by the shop floor control module of AMAPS. Accuracy of input to the system is improved through extensive use of bar codes to gather information on the product as it moves through and between work stations. This computerized preparation of material tracing has an impact on direct manufacturing records, quality control records, nuclear material records and accounting and inventory records. This is of benefit to both Exxon Nuclear and its customers

  17. Flexible nanovectors

    Pugno, Nicola M

    2008-01-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  18. Flexible nanovectors

    Pugno, Nicola M.

    2008-11-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  19. Pengaruh Hedonic Shopping Motivation Terhadap Impulse Buying Pada Toko Online: Studi Pada Toko Online Zalora

    Pasaribu, Lia Octaria; Dewi, Citra Kusuma

    2015-01-01

    Online shopping, including shopping for fashion goods, has become a trend in Indonesia. One of buyer's motivations to do online-fashion-shopping is hedonic shopping motivation. This research aims to examine the influence of hedonic shopping motivation on impulse buying process. Using 100 buyers of Zalora (an online shop) as the respondents, this study confirms that hedonic shopping motivation has a significant influence on the impulse buying process.

  20. Shopping cart injuries, entrapment, and childhood fatality.

    Jensen, Lisbeth; Charlwood, Cheryl; Byard, Roger W

    2008-09-01

    Shopping carts may be associated with a variety of injuries, particularly in toddlers and young children. These usually relate to falls from carts or to tip-overs. Injuries that are sustained include hematomas/contusions, abrasions, lacerations, fractures, and fingertip amputations. Fatal episodes are uncommon and are usually due to blunt craniocerebral trauma from falls. A case involving a 19-month-old girl is reported who became entrapped when she inserted her head through the side frame of a cart that had been removed from a supermarket and left at her home address. Death was caused by neck compression. Although rare, the potential for lethal entrapment during unsupervised play means that the presence of stray shopping carts at private residences and in public places, including playgrounds and parks, is of concern. Strategies, such as coin deposits, should be encouraged to assist in the return of such carts to supermarkets.

  1. RFID Data Cleaning for Shop Floor Applications

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  2. Trustworthy Online Shopping with Price Impact

    Musial Jedrzej

    2017-06-01

    Full Text Available Internet shopping is one of the main pillars of electronic commerce.According to the literature, the Internet Shopping Optimization Problem (ISOPhas been defined in order to optimize the global cost of online purchase, taking into account both the cost of products and shipping. In this study, it was decided to propose and analyze a very interesting, and really substantial, extension of the ISOP.Namely, trust factors were subjected to careful analysis from the customer point of view. The analysis is based on a specially prepared questionnaire, supplemented by the information from the literature and our own observations. Thus, it was possible to propose a definition of a new mathematical model of the problem, and to prove its affiliation to the class of strongly NP-hard problems. In addition, the heuristic algorithm is proposed, which can be used to solve the problem.

  3. Permutation flow-shop scheduling problem to optimize a quadratic objective function

    Ren, Tao; Zhao, Peng; Zhang, Da; Liu, Bingqian; Yuan, Huawei; Bai, Danyu

    2017-09-01

    A flow-shop scheduling model enables appropriate sequencing for each job and for processing on a set of machines in compliance with identical processing orders. The objective is to achieve a feasible schedule for optimizing a given criterion. Permutation is a special setting of the model in which the processing order of the jobs on the machines is identical for each subsequent step of processing. This article addresses the permutation flow-shop scheduling problem to minimize the criterion of total weighted quadratic completion time. With a probability hypothesis, the asymptotic optimality of the weighted shortest processing time schedule under a consistency condition (WSPT-CC) is proven for sufficiently large-scale problems. However, the worst case performance ratio of the WSPT-CC schedule is the square of the number of machines in certain situations. A discrete differential evolution algorithm, where a new crossover method with multiple-point insertion is used to improve the final outcome, is presented to obtain high-quality solutions for moderate-scale problems. A sequence-independent lower bound is designed for pruning in a branch-and-bound algorithm for small-scale problems. A set of random experiments demonstrates the performance of the lower bound and the effectiveness of the proposed algorithms.

  4. Flexible Work Arrangements in ARL Libraries. SPEC Kit #180.

    Zabel, Diane, Comp.; And Others

    This report presents the results of a survey of Association of Research Libraries (ARL) members about the current climate and practices regarding flexible work arrangements. Data are reported on the availability of schedule flexibility, job exchange, part-time arrangements, and leaves, as well as information about faculty status, tenure,…

  5. Flexible Work Styles in the Corporate Research Center.

    Baker, Katherine

    2000-01-01

    Explores the appropriateness for flexible work schedules for corporate librarians and provides insight into the benefits of flexible work arrangements in other industries. Highlights include technological changes that have changed roles and made resources available electronically; telecommuters; job sharing; and the effects of flexible…

  6. On-the-job-training, job search and job mobility

    Josef Zweimüller; Rudolf Winter-Ebmer

    2003-01-01

    This paper analyzes the impact of formal training on worker mobility. Using data from the Swiss Labor Force Survey, we find that both general and specific training significantly affects on-the-job search activities. The effect of training on actual job mobility differs between searchers and non-searchers. In line with human capital theory, we find that specific (general) training has a negative (positive) impact on job mobility for previous non-searchers. For individuals who have been looking...

  7. Employee motivation improvement at "Drogas" shop

    Konno, Viktorija

    2012-01-01

    Work : Employee motivation improvement at “Drogas” shop for getting baccalaureate in science management. This work includes four parts. In the first section author explained the definition of motivation, there was reviewed motivation's role in enterprise. Author reviewed total motivation's model, which models exist for a long while and how they were changing in process of time. The second part contains wide information about motivation's theories and description of motivation's t...

  8. Maritime Cast Shop Integrated Improvement Plan

    2010-08-20

    constraint departments (Upgrade & Radiography). The intent of this visual communication system was to limit the inspection queue to about one days...Install small work status boards in both work areas to facilitate visual communication .  Install protection for water coolant mix pipe... visual communication system to track parts as they move throughout the shop floor. Visual management systems tailored to the unique needs of a company

  9. Shopping intention prediction using decision trees

    Dario Šebalj

    2017-09-01

    Full Text Available Introduction: The price is considered to be neglected marketing mix element due to the complexity of price management and sensitivity of customers on price changes. It pulls the fastest customer reactions to that change. Accordingly, the process of making shopping decisions can be very challenging for customer. Objective: The aim of this paper is to create a model that is able to predict shopping intention and classify respondents into one of the two categories, depending on whether they intend to shop or not. Methods: Data sample consists of 305 respondents, who are persons older than 18 years involved in buying groceries for their household. The research was conducted in February 2017. In order to create a model, the decision trees method was used with its several classification algorithms. Results: All models, except the one that used RandomTree algorithm, achieved relatively high classification rate (over the 80%. The highest classification accuracy of 84.75% gave J48 and RandomForest algorithms. Since there is no statistically significant difference between those two algorithms, authors decided to choose J48 algorithm and build a decision tree. Conclusions: The value for money and price level in the store were the most significant variables for classification of shopping intention. Future study plans to compare this model with some other data mining techniques, such as neural networks or support vector machines since these techniques achieved very good accuracy in some previous research in this field.

  10. Factor Driving Consumer Intention in Online Shopping

    Wanida Suwunniponth

    2014-01-01

    The objectives of this research paper was to study the influencing factors that contributed the willingness of consumers to purchase products online included quality of website, perceived ease of use, perceived usefulness, trust on online purchases, attitude towards online shopping and intentions to online purchases. The research was conducted in both quantitative and qualitative methods, by utilizing both questionnaire and in-depth interview. A questionnaire was used to collect data from 350...

  11. GENDER AND SHOPPING BEHAVIOR OUTCOMES IN THE CONTEXT OF SHOPPING CENTERS

    Ioana Nicoleta ABRUDAN

    2016-09-01

    Full Text Available Understanding consumer behavior can be divided into three parts: before visiting the stores or shopping centers, during the visit, and after. From the point of view of the final result intended by retailers, satisfying customers in terms of profitability, all three components are equally important. A relevant segmentation criterion for most products and stores is gender. Previous research suggests that gender influences shopping motivations, the way people shop and shopping behavior outcomes. The purpose of this article is to investigate if there are, indeed, differences between shopping behavior outputs of women and men (affective loyalty (satisfaction and conative loyalty, as found by certain researchers, and also in terms of the factors that influence the formation of conative loyalty. The results confirm that there are few significant differences in the satisfaction level, although for women all values are slightly higher, and none in the repurchase and recommendation intentions between the two genders. Conative loyalty formation (defined as intent to repurchase and recommend takes place differently between the two genders.

  12. Aesthetic quality inference for online fashion shopping

    Chen, Ming; Allebach, Jan

    2014-03-01

    On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

  13. Rostocker Hof shopping mall; Galerie Rostocker Hof

    Anon.

    1998-06-01

    The Rostocker Hof shopping mall comprises a 151-room hotel, a shopping mall of 45 shops, 22230m{sup 2} of office floor, and an underground garage with 308 parking lots. The following systems are described: Heating systems, air conditioning systems, refrigeration systems, ventilation systems, fire protection systems and electrical installation. Heat is supplied by the district heating grids. Circuit diagrams and flow charts are presented for the heat exchangers and heat supply system, the air conditioning system, the sanitary and sprinkler systems, and the single-room control systems for heat and fresh air supply. (MSK) [Deutsch] Der Rostocker Hof umfasst ein Hotel mit 151 Zimmern, eine Einzelhandelspassage mit 45 Laeden sowie 2230qm Bueronutzungsflaeche und eine Tiefgarage mit 308 Stellplaetzen. Die Haustechnik wird in folgenden Punkten erlaeutert: Heizungtechnik, Klimatechnik, Kaeltetechnik, Lueftungstechnik, Brandschutzanlage sowie Elektroinstallation. Die Waermerversorgung erfolgt durch Fernwaerme. Schaltplaene bzw. Funktionsablaeufe sind fuer die Waermeuebergabestation, die Waermeaufbereitung, die Luftaufbereitungsanlage, die Sanitaer- und Sprinkleranlage sowie fuer die Waerme- und Raumluftregelung der Einzelraeume enthalten. (MSK)

  14. A flexible modelling software for data acquisition

    Shu Yantai; Chen Yanhui; Yang Songqi; Liu Genchen

    1992-03-01

    A flexible modelling software for data acquisition is based on an event-driven simulator. It can be used to simulate a wide variety of systems which can be modelled as open queuing networks. The main feature of the software is its flexibility to evaluate the performance of various data acquisition system, whether pulsed or not. The flexible features of this software as follow: The user can choose the number of processors in the model and the route which every job takes to move the model. the service rate of a processor is automatically adapted. The simulator has a pipe-line mechanism. A job can be divided into several segments and a processor may be used as a compression component etc. Some modelling techniques and applications of this software in plasma physics laboratories are also presented

  15. Discrete particle swarm optimization to solve multi-objective limited-wait hybrid flow shop scheduling problem

    Santosa, B.; Siswanto, N.; Fiqihesa

    2018-04-01

    This paper proposes a discrete Particle Swam Optimization (PSO) to solve limited-wait hybrid flowshop scheduing problem with multi objectives. Flow shop schedulimg represents the condition when several machines are arranged in series and each job must be processed at each machine with same sequence. The objective functions are minimizing completion time (makespan), total tardiness time, and total machine idle time. Flow shop scheduling model always grows to cope with the real production system accurately. Since flow shop scheduling is a NP-Hard problem then the most suitable method to solve is metaheuristics. One of metaheuristics algorithm is Particle Swarm Optimization (PSO), an algorithm which is based on the behavior of a swarm. Originally, PSO was intended to solve continuous optimization problems. Since flow shop scheduling is a discrete optimization problem, then, we need to modify PSO to fit the problem. The modification is done by using probability transition matrix mechanism. While to handle multi objectives problem, we use Pareto Optimal (MPSO). The results of MPSO is better than the PSO because the MPSO solution set produced higher probability to find the optimal solution. Besides the MPSO solution set is closer to the optimal solution

  16. Evolutionary Hybrid Particle Swarm Optimization Algorithm for Solving NP-Hard No-Wait Flow Shop Scheduling Problems

    Laxmi A. Bewoor

    2017-10-01

    Full Text Available The no-wait flow shop is a flowshop in which the scheduling of jobs is continuous and simultaneous through all machines without waiting for any consecutive machines. The scheduling of a no-wait flow shop requires finding an appropriate sequence of jobs for scheduling, which in turn reduces total processing time. The classical brute force method for finding the probabilities of scheduling for improving the utilization of resources may become trapped in local optima, and this problem can hence be observed as a typical NP-hard combinatorial optimization problem that requires finding a near optimal solution with heuristic and metaheuristic techniques. This paper proposes an effective hybrid Particle Swarm Optimization (PSO metaheuristic algorithm for solving no-wait flow shop scheduling problems with the objective of minimizing the total flow time of jobs. This Proposed Hybrid Particle Swarm Optimization (PHPSO algorithm presents a solution by the random key representation rule for converting the continuous position information values of particles to a discrete job permutation. The proposed algorithm initializes population efficiently with the Nawaz-Enscore-Ham (NEH heuristic technique and uses an evolutionary search guided by the mechanism of PSO, as well as simulated annealing based on a local neighborhood search to avoid getting stuck in local optima and to provide the appropriate balance of global exploration and local exploitation. Extensive computational experiments are carried out based on Taillard’s benchmark suite. Computational results and comparisons with existing metaheuristics show that the PHPSO algorithm outperforms the existing methods in terms of quality search and robustness for the problem considered. The improvement in solution quality is confirmed by statistical tests of significance.

  17. Optimization Analysis of Supply Chain Resource Allocation in Customized Online Shopping Service Mode

    Jianming Yao

    2015-01-01

    Full Text Available For an online-shopping company, whether it can provide its customers with customized service is the key to enhance its customers’ experience value and its own competence. A good customized service requires effective integration and reasonable allocation of the company’s supply chain resources running in the background. Based on the analysis of the allocation of supply chain resources in the customized online shopping service mode and its operational characteristics, this paper puts forward an optimization model for the resource allocation and builds an improved ant algorithm to solve it. Finally, the effectiveness and feasibility of the optimization method and algorithm are demonstrated by a numerical simulation. This paper finds that the special online shopping environments lead to many dynamic and uncertain characters of the service demands. Different customized service patterns and their combination patterns should match with different supply chain resource allocations. The optimization model not only reflects the required service cost and delivery time in the objective function, but also considers the service scale effect optimization and the relations of integration benefits and risks. The improved ant algorithm has obvious advantages in flexibly balancing the multiobjective optimizations, adjusting the convergence speed, and adjusting the operation parameters.

  18. Revisiting Symbiotic Job Scheduling

    Eyerman , Stijn; Michaud , Pierre; Rogiest , Wouter

    2015-01-01

    International audience; —Symbiotic job scheduling exploits the fact that in a system with shared resources, the performance of jobs is impacted by the behavior of other co-running jobs. By coscheduling combinations of jobs that have low interference, the performance of a system can be increased. In this paper, we investigate the impact of using symbiotic job scheduling for increasing throughput. We find that even for a theoretically optimal scheduler, this impact is very low, despite the subs...

  19. Jobs: women's double burden.

    1995-01-01

    Whereas international conventions and national laws provide equal opportunities for women in employment, the reality of women's lives keeps a disproportionate number of women unemployed, underemployed, and living in poverty. The UN itself, which officially is working toward equity among its employees, has a staff composed of just 32.6% women, and women comprise only 10.5% of the top end of the hierarchy. In areas where women's labor force participation has increased dramatically, women typically earn 30-40% less than men doing the same job or else their employment is limited to "traditional female" service positions. The fact that women and girls have received an inadequate education makes it extremely difficult to break the barriers of discrimination in developing countries. The empowerment of women will break the education barrier, and, when that falls, many other barriers will follow suit. Efforts are already underway to break structural barriers caused by economic and social policies. For example, a more flexible pattern of work has been proposed which will include the voluntary assumption of flexible hours, job-sharing, and part-time work. The concept of work is also being broadened to include the important human services that women traditionally provide on a volunteer basis. This will lead to a valuation of women's contribution to society which can be added to calculations of gross domestic product. Women also need protection as they attempt to eke out a living in the informal sector which has been the traditional avenue for women to earn money. This sector is not protected by law and is subject to extortion by officials and by male competitors. A variety of measures is under consideration to increase the protection of informal sector workers. Women also need protection in the conventional work place, especially as they enter fields traditionally reserved for men. These questions are important even in the context of global unemployment because these issues

  20. Relationship Of Core Job Characteristics To Job Satisfaction And ...

    In order to clarify the conceptual and empirical distinction between job satisfaction and job involvement constructs, this study investigates the relationship between construction workers core job characteristics, job satisfaction and job involvement. It also investigates the mediating role of job satisfaction between core job ...

  1. The skill-divide in job quality: a cross-national analysis of 28 countries.

    Stier, Haya

    2015-01-01

    This study focuses on the skill divide in job quality and the role of social institutions in structuring the relation of workers' qualifications to the attributes of their jobs. Four measures of job quality are examined: job security, job achievement, job content and work schedule flexibility. The study is based on the 2005 ISSP module on work orientations and encompasses 28 countries. Obtained through multilevel modeling, the findings show that low-skilled workers are disadvantaged in all aspects of job quality. However, skill inequality in the quality of employment depends on countries' characteristics, with declining inequality in countries at higher levels of technological development and to some extent also in times of technological growth. At times of high unemployment, skill disparities in job security widen while on other measures of job quality they decline. Under high market regulation, the low skilled enjoy better job security but on other measures, skill inequalities increase. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Determinants of Customer Continuance Intention of Online Shopping

    Al-maghrabi, T.

    2011-01-01

    Full Text Available The purpose of this study is to clarify theory and identify factors that could explain the level of continuance intention of e-shopping. A revised technology acceptance model integrates expectation confirmation theory and investigates effects of age differences. An online survey of internet shoppers in Saudi Arabia. Structural equation modelling and invariance analysis confirm model fit. The findings confirm that perceived usefulness, enjoyment and social pressure are determinants of e-shopping continuance. The structural weights are mostly equivalent between young and old but the regression path from perceived usefulness to social pressure is stronger for younger respondents. This research moves beyond e-shopping intentions to factors affecting e-shopping continuance, explaining 55% of intention to continue shopping online. Online strategies cannot ignore direct and indirect effects on continuance intentions. The findings contribute to literature on internet shopping and continuance intentions in the context of Saudi Arabia.

  3. Census tract correlates of vape shop locations in New Jersey.

    Giovenco, Daniel P; Duncan, Dustin T; Coups, Elliot J; Lewis, M Jane; Delnevo, Cristine D

    2016-07-01

    Vape shops are opening across the USA, but little is known about the types of neighborhoods where they are located. This study explores community-level predictors of vape shop locations in New Jersey, USA. Vape shops were identified in July 2015 using a validated systematic online search protocol and geocoded using Google Earth Pro. Multivariable logistic regression identified demographic and other predictors of vape shop presence at the census tract level. Tobacco outlet density was consistently associated with higher odds of vape shop presence after adjusting for covariates (pretail were negatively associated with vapor outlets. Census tracts with a higher proportion of non-Hispanic black residents had significantly lower odds of having a vape shop (β=-0.03, pretail is high, but where fewer racial minorities live. The retail environment may communicate social norms regarding vaping and ultimately influence use behaviors of community residents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. The impact of science shops on university research and education

    Jørgensen, Michael Søgaard

    2000-01-01

    Science shops are mediating agencies at universities that give citizens and citizen groups access to the resources of the university through co-operation with students and researchers. Science shops have three aims: to support citizens and citizen groups in their efforts getting influence...... to the impact of science shops on universities and on society are discussed. A typology for the different types of knowledge requested by citizens and citizen groups through science shops is presented (documentation, knowledge building, development of new perspectives). As important aspects of the potentials......, prerequisites and limits to the impact of science shops are discussed the networking between the science shop and the researchers and teachers and with the citizens and other external actors, and the content and the structure of the curricula at the university....

  5. Social image of students who shop and don't shop online.

    Lammers, H Bruce; Curren, Mary T; Cours, Deborah; Lammers, Marilyn L

    2003-06-01

    A descriptive survey of a stratified random sample of 326 undergraduates from a large, diverse university in Los Angeles was conducted to assess whether resistance to online shopping might be, in part, related to negative social perceptions of those who shop online. Indirect questioning showed that students perceived online student shoppers as more lazy and less likely to fear for the safety and security of others but also as more trustworthy, attractive, successful, and smart. Differences in social perceptions were not related to these students' own online spending.

  6. Job Satisfaction and Job Performance at the Work Place

    Vanden Berghe, Jae Hyung

    2011-01-01

    The topic of the thesis is job satisfaction and job performance at the work place. The aim is to define the determinants for job satisfaction and to investigate the relationship between job satisfaction and job performance and the influence of job satisfaction on job performance. First we look into the Theory of Reasoned Action and the Theory of Planned Behaviour to account for the relationship between attitudes and behaviour. Job satisfaction is then explained as a function of job feature...

  7. Optimal experience in online shopping: the influence of flow

    Sharkey, Ultan; Acton, Thomas; Conboy, Kieran

    2012-01-01

    peer-reviewed This research investigates the influences of product presentation modes, decision behaviour and the consumer experience on Internet shopping. The growth of online shopping brings with it cognitive challenges for consumers attempting to assess large numbers of options in purchase decisions. Further, there is little guidance for vendors in terms of presenting large numbers of product. In this study, online shopping is viewed as an information processing, decision ta...

  8. Consumer behavior towards Online shopping of electronics in pakistan

    BASHIR, ADIL

    2013-01-01

    E-commerce has made life simple and innovative of individuals and groups; consumer Behavior in online shopping is different from the physical market where he has access to see the product. The purpose of the research was to study the consumer behavior in online shopping of electronics especially in Pakistan. The main research question in thesis is how consumers behave while shopping online. Primary data was collected through the questionnaire survey and by emails from personal contacts in...

  9. Evaluation of Fresh Food Internet Shopping in Korean Beef

    金, 鍾和; 森高, 正博; 福田, 晋; Kim, Jong-hwa; Moritaka, Masahiro; Fukuda, Susumu

    2013-01-01

    This paper focuses on consumer reactions to the fresh food internet shopping on Korea beef. In the paper, we have analyzed an effective relation in consumer's perceived qualities, the evaluation of commodities and the evaluation of fresh food internet shopping. As a result, two effective relations were found. Firstly, consumer's perceived qualities affect the evaluation of commodities. Secondly, the evaluation of commodities affects t-he evaluation of fresh food internet shopping. This result...

  10. Breaking Out of the Local: International dimensions of science shops

    DeBok, Caspar; Steinhaus, Norbert

    2008-01-01

    In this article we want to give an overview of the international dimension and the interest of the European Union (EU) in the concept of Science Shops. The European Commission (EC) manages the day-to-day business by initiating and implementing EU policies and spending EU funds. The EC support for Science Shops has been an important factor for the international interest and progress of the Science Shop movement. This article will not give detailed information about daily routines of a Science ...

  11. E-commerce factors influencing consumers‘ online shopping decision

    Baubonienė, Živilė; Gulevičiūtė, Gintarė

    2015-01-01

    Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

  12. Specific energy use in Swedish and Norwegian shopping malls

    Stensson, Sofia; Axell, Monica (SP Energy Technology, Boraas (Sweden)); Smaage, Kjell Petter (Evotek AS (Norway)); Fahlen, Per (Chalmers Univ. of Technology, Building Services Engineering, Goeteborg (Sweden))

    2009-07-01

    The prevalence of shopping malls is growing worldwide. Internationally, there are differences in energy use and system solutions due to local outdoor climate, available energy resources, prices, national building regulations, traditions etc. On the other hand, tenants are usually international chains and they often have the same demands regarding indoor climate, system solutions etc. irrespective of the national differences. Shopping malls overall tends to have large lighting loads, high population density and, hence, a large air conditioning demand. There is also an apparent trend towards increasing glass surfaces and such design feature affects the energy balance of the building. For those interested in the energy efficiency of the building and its installations, it is interesting to know how different system solutions affect the energy use. Benchmarking between buildings gives valuable insight to energy efficient design and operation. However, available information on energy use for such benchmarking in shopping malls is still rather limited. This study investigates shopping malls in Sweden and Norway. Available national statistical data on retail and shopping malls are reviewed. Further building statistical data were collected from building owners and managers, covering energy use in 41 shopping malls. Additional energy use data for 115 shops, within three of these shopping malls were also collected. The building statistical data shows that the average energy use in Norwegian and Swedish shopping malls are approximately 291 and 279 kWh/m2/year respectively. The highest energy use exceeds the lowest figure by approximately 50 percent, indicating a significant potential for improvement. Results also show a wide deviation in energy use of the different shops in a shopping mall. The paper further provides a discussion concerning alternative benchmarking methods and necessary improvements to make valid conclusions regarding energy use in shopping malls.

  13. Influence of visualization on consumption during on-line shopping

    Hictaler, Urška

    2013-01-01

    This diploma work studies the influence of visualization on consumption during on-line shopping. The first part of the thesis starts with key areas of visualization, consumption and on-line shopping. Visualization, areas of use, human perception and ways of product presentation in on-line shops are defined discussed first. Next, consumption, consumers and factors that influence their decisions and satisfaction are defined. The last topic in the first part of the thesis discusses on-line shopp...

  14. Customer Buying Behavior : - Online shopping towards electronic product

    Wang, Dan; Yang, Liuzi

    2010-01-01

    ABSTRACT Online shopping in EU has been shown to a good potential market. The electronic equipment takes a high percent of the individuals shopping. Compared with other goods, online shopping of electronic goods adds great convenience to the life of the people. Buying electronic gadgets online gives customers an opportunity to find a great variety of product online, and customers can review a wide selection of products and find special offers and discount with the best deals online. In the co...

  15. Job sharing in medical training: an evaluation of a 3-year project.

    Goldberg, I; Paice, E

    2000-02-01

    Job sharing has been introduced on a major scale in one deanery to help accommodate increasing demand for flexible (part-time) training. We arranged 37 job shares for 74 trainees between 1996 and 1999. Job shares lasted from 6 months to 2 years. Trainees in job shares were as satisfied with their training as those in supernumerary posts or in full-time training.

  16. HESITANCY TOWARDS ONLINE SHOPPING, A STUDY OF PAKISTANI CONSUMERS

    Usman YOUSAF

    2012-01-01

    Full Text Available To study the influence of Perceived cost, risk, convenience and enjoyment on online consumer purchases. Being more convenient online shopping seems painless compared to in store shopping, why consumers are still reluctant to shop online?.A sample of 220 questionnaires was filled from different departments at University of Sargodha. Respondents were asked to fill the questionnaire based on four factors (Perceived cost, Perceived risk, Perceived convenience, Perceived enjoyment, there were 2 general questions. Out of 220, 207 questionnaires were returned. One sample test is applied in this study to check the reliability of independent variables. Analysis was also done on basis of gender and their ages. The most important factor out of four, which can persuade the customer's online buying decision, is delivery cost for purchased items and it has negative relationship with dependent variable, moreover perceived risk has also negative relationship with dependent one. Perceived convenience and Perceived enjoyment has positive relationship with online shopping preference. As online shopping is easier to do but due to extra delivery cost and risk factors consumers do not adopt online shopping and these factors should be minimized to promote online shopping. Online shopping should be promoted and to gain the consumer confidence, delivery cost and risk factor should be minimized. As online shopping is easier to do as compared to offline shopping but people still reluctant to use internet for online shopping, so to promote online shopping delivery cost and risk factor should be minimized to gain consumers attraction and confidence. People want to experience online shopping but it won’t be promoted until delivery cost and perceived risk factors be reduced. A little work has been done on exploring the factors that influence the online buying decision. These factors are called situational factors and include delivery charges, risk factors, convenience

  17. Consumers preferences of shopping centers in Bratislava (Slovakia

    Kristína Bilková

    2016-05-01

    Full Text Available There have been changes in the shopping behavior and preferences of consumers in the post-communist countries caused by political changes after 1989. Slovakia is not an exception, and it has been observed a change not only at the consumers’ level but also in retail stores. A notable bearer of such changes was the construction of big shopping centers that were a new phenomenon in shopping. They quickly became popular and changed spatial and shopping patterns of consumers. The main aim of this study is to analyze and evaluate the shopping preferences of consumers based on the example of the capital city – Bratislava (at the level of urban districts. The database consists of results of a questionnaire survey carried out in 2011. Respondents were interviewed inside the shopping center. The partial aims focus on the analysis of consumers’ perceptions, the frequency of their shopping and the mode of transport used for shopping. One of the goals of this study is also to evaluate the perception of consumers in terms of the catchment areas of the chosen shopping center, as well as the perceptional classification of retail in the given area and the accessibility of stores.

  18. Comparison of Firefly algorithm and Artificial Immune System algorithm for lot streaming in -machine flow shop scheduling

    G. Vijay Chakaravarthy

    2012-11-01

    Full Text Available Lot streaming is a technique used to split the processing of lots into several sublots (transfer batches to allow the overlapping of operations in a multistage manufacturing systems thereby shortening the production time (makespan. The objective of this paper is to minimize the makespan and total flow time of -job, -machine lot streaming problem in a flow shop with equal and variable size sublots and also to determine the optimal sublot size. In recent times researchers are concentrating and applying intelligent heuristics to solve flow shop problems with lot streaming. In this research, Firefly Algorithm (FA and Artificial Immune System (AIS algorithms are used to solve the problem. The results obtained by the proposed algorithms are also compared with the performance of other worked out traditional heuristics. The computational results shows that the identified algorithms are more efficient, effective and better than the algorithms already tested for this problem.

  19. E-shopping and its interactions with in-store shopping

    Farag, Sendy

    2006-01-01

    Nowadays, the Internet permeates society: for many people, life without the Internet is hard to imagine. E-shopping (searching and/or buying products online) has rapidly gained popularity in the past few years, and could affect consumers’ visits to stores. The goal of this research is to show which

  20. “Window Shopping, Granada, 1930s”

    Mae Claxton

    2010-02-01

    Full Text Available “Window Shopping, Granada, 1930s,” Photographs, p. 16, with the gracious permission of the Eudora Welty FoundationAn African American woman, dressed in her Saturday go-to-town-best, stands outside a store window, chin in hand, contemplating the contents in the window. The image is reflective and thoughtful. What is she thinking? And what lies beyond the frame of this photograph? In Mississippi in the 1930s, could she walk into this store, perhaps try on clothes or hats, and make a purchase? I...