WorldWideScience

Sample records for flexibility preservation impact

  1. Flexible Bit Preservation on a National Basis

    DEFF Research Database (Denmark)

    Jurik, Bolette; Nielsen, Anders Bo; Zierau, Eld

    2012-01-01

    In this paper we present the results from The Danish National Bit Repository project. The project aim was establishment of a system that can offer flexible and sustainable bit preservation solutions to Danish cultural heritage institutions. Here the bit preservation solutions must include support...... of bit safety as well as other requirements like e.g. confidentiality and availability. The Danish National Bit Repository is motivated by the need to investigate and handle bit preservation for digital cultural heritage. Digital preservation relies on the integrity of the bits which digital material...

  2. Complexity Management Using Metrics for Trajectory Flexibility Preservation and Constraint Minimization

    Science.gov (United States)

    Idris, Husni; Shen, Ni; Wing, David J.

    2011-01-01

    The growing demand for air travel is increasing the need for mitigating air traffic congestion and complexity problems, which are already at high levels. At the same time new surveillance, navigation, and communication technologies are enabling major transformations in the air traffic management system, including net-based information sharing and collaboration, performance-based access to airspace resources, and trajectory-based rather than clearance-based operations. The new system will feature different schemes for allocating tasks and responsibilities between the ground and airborne agents and between the human and automation, with potential capacity and cost benefits. Therefore, complexity management requires new metrics and methods that can support these new schemes. This paper presents metrics and methods for preserving trajectory flexibility that have been proposed to support a trajectory-based approach for complexity management by airborne or ground-based systems. It presents extensions to these metrics as well as to the initial research conducted to investigate the hypothesis that using these metrics to guide user and service provider actions will naturally mitigate traffic complexity. The analysis showed promising results in that: (1) Trajectory flexibility preservation mitigated traffic complexity as indicated by inducing self-organization in the traffic patterns and lowering traffic complexity indicators such as dynamic density and traffic entropy. (2)Trajectory flexibility preservation reduced the potential for secondary conflicts in separation assurance. (3) Trajectory flexibility metrics showed potential application to support user and service provider negotiations for minimizing the constraints imposed on trajectories without jeopardizing their objectives.

  3. Analysis of flexible structures under lateral impact

    International Nuclear Information System (INIS)

    Ramirez, D. F.; Razavi, H.

    2012-01-01

    Three methods for analysis of flexible structures under lateral impact are presented. The first proposed method (Method A) consists of: (1) modifying an available deceleration on a rigid target with conservation principles to account for structural flexibility; and (2) transient nonlinear analysis of the structure with the corrected forcing function. The second proposed method (Method B) is similar to Method A in obtaining the forcing function but it solves the equations of motion of an idealized two-degree-of-freedom system instead of directly using conservation principles. The last method simply provides the maximum force in the structure using the conservation of energy and linear momentum. A coupled simulation is also performed in LS-DYNA and compared against the proposed methods. A case study is presented to illustrate the applicability of all three methods and the LS-DYNA simulation. (authors)

  4. Structure-preserving integrators in nonlinear structural dynamics and flexible multibody dynamics

    CERN Document Server

    2016-01-01

    This book focuses on structure-preserving numerical methods for flexible multibody dynamics, including nonlinear elastodynamics and geometrically exact models for beams and shells. It also deals with the newly emerging class of variational integrators as well as Lie-group integrators. It discusses two alternative approaches to the discretization in space of nonlinear beams and shells. Firstly, geometrically exact formulations, which are typically used in the finite element community and, secondly, the absolute nodal coordinate formulation, which is popular in the multibody dynamics community. Concerning the discretization in time, the energy-momentum method and its energy-decaying variants are discussed. It also addresses a number of issues that have arisen in the wake of the structure-preserving discretization in space. Among them are the parameterization of finite rotations, the incorporation of algebraic constraints and the computer implementation of the various numerical methods. The practical application...

  5. Responsive, Flexible and Scalable Broader Impacts (Invited)

    Science.gov (United States)

    Decharon, A.; Companion, C.; Steinman, M.

    2010-12-01

    investment of time. Initiated in summer 2010, the webinars are interactive and highly flexible: people can participate from their homes anywhere and can interact according to their comfort levels (i.e., submitting questions in “chat boxes” rather than orally). Expansion - To expand scientists’ research beyond educators attending a workshop or webinar, COSEE-OS uses a blog as an additional mode of communication. Topically focused by concept maps, blogs serve as a forum for scalable content. The varied types of formatting allow scientists to create long-lived resources that remain attributed to them while supporting sustained educator engagement. Blogs are another point of contact and allow educators further asynchronous access to scientists. Based on COSEE-OS evaluations, interacting on a blog was found to be educators’ preferred method of following up with scientists. Sustained engagement of scientists or educators requires a specific return on investment. Workshops and web tools can be used together to maximize scientist impact with a relatively small investment of time. As one educator stated, “It really helps my students’ interest when we discuss concepts and I tell them my knowledge comes directly from a scientist!” [A. deCharon et al. (2009), Online tools help get scientists and educators on the same page, Eos Transactions, American Geophysical Union, 90(34), 289-290.

  6. Preserved Flora and Organics in Impact Melt Breccias

    Science.gov (United States)

    Schultz, P. H.; Harris, R. Scott; Clemett, S. J.; Thomas-Keprta, K. L.; Zarate, M.

    2014-01-01

    At least seven glass-bearing strata of varying ages occur at different horizons in the Pampean sediments of Argentina dating back to the Miocene. In a strict sense, these impact glasses are melt-matrix breccias composed of partially digested minerals clasts and basement fragments indicative of crater excavation. Ar-40/Ar-39 dating yield ages (+/- 2 sigma) of 6 +/- 2 Ka, 114 +/- 26 Ka, 230 +/- 30 Ka, 445 +/- 21 Ka, 3.27 +/- 0.08 Ma (near Mar del Plata = MdP), 5.28 +/- 0.04 Ma, and 9.21 +/- 0.08 Ma (near Chasico = CH) Where found in place (not reworked), these ages are consistent with the local stratigraphy and faunal assemblages. A striking property of some of these impact glasses is the encapsulation of preserved fragments of floral (and even soft-tissue faunal remains). Here we identify retained organics and describe a likely process of encapsulation and preservation.

  7. Flexibility.

    Science.gov (United States)

    Humphrey, L. Dennis

    1981-01-01

    Flexibility is an important aspect of all sports and recreational activities. Flexibility can be developed and maintained by stretching exercises. Exercises designed to develop flexibility in ankle joints, knees, hips, and the lower back are presented. (JN)

  8. How does symmetry impact the flexibility of proteins?

    Science.gov (United States)

    Schulze, Bernd; Sljoka, Adnan; Whiteley, Walter

    2014-02-13

    It is well known that (i) the flexibility and rigidity of proteins are central to their function, (ii) a number of oligomers with several copies of individual protein chains assemble with symmetry in the native state and (iii) added symmetry sometimes leads to added flexibility in structures. We observe that the most common symmetry classes of protein oligomers are also the symmetry classes that lead to increased flexibility in certain three-dimensional structures-and investigate the possible significance of this coincidence. This builds on the well-developed theory of generic rigidity of body-bar frameworks, which permits an analysis of the rigidity and flexibility of molecular structures such as proteins via fast combinatorial algorithms. In particular, we outline some very simple counting rules and possible algorithmic extensions that allow us to predict continuous symmetry-preserving motions in body-bar frameworks that possess non-trivial point-group symmetry. For simplicity, we focus on dimers, which typically assemble with twofold rotational axes, and often have allosteric function that requires motions to link distant sites on the two protein chains.

  9. Flexible pressure sensors for smart protective clothing against impact loading

    International Nuclear Information System (INIS)

    Wang, Fei; Zhu, Bo; Shu, Lin; Tao, Xiaoming

    2014-01-01

    The development of smart protective clothing will facilitate the quick detection of injuries from contact sports, traffic collisions and other accidents. To obtain real-time information like spatial and temporal pressure distributions on the clothing, flexible pressure sensor arrays are required. Based on a resistive fabric strain sensor we demonstrate all flexible, resistive pressure sensors with a large workable pressure range (0–8 MPa), a high sensitivity (1 MPa −1 ) and an excellent repeatability (lowest non-repeatability ±2.4% from 0.8 to 8 MPa) that can be inexpensively fabricated using fabric strain sensors and biocompatible polydimethylsiloxane (PDMS). The pressure sensitivity is tunable by using elastomers with different elasticities or by the pre-strain control of fabric strain sensors. Finite element simulation further confirms the sensor design. The simple structure, large workable pressure range, high sensitivity, high flexibility, facile fabrication and low cost of these pressure sensors make them promising candidates for smart protective clothing against impact loading. (paper)

  10. BangA: An Efficient and Flexible Generalization-Based Algorithm for Privacy Preserving Data Publication

    Directory of Open Access Journals (Sweden)

    Adeel Anjum

    2017-01-01

    Full Text Available Privacy-Preserving Data Publishing (PPDP has become a critical issue for companies and organizations that would release their data. k-Anonymization was proposed as a first generalization model to guarantee against identity disclosure of individual records in a data set. Point access methods (PAMs are not well studied for the problem of data anonymization. In this article, we propose yet another approximation algorithm for anonymization, coined BangA, that combines useful features from Point Access Methods (PAMs and clustering. Hence, it achieves fast computation and scalability as a PAM, and very high quality thanks to its density-based clustering step. Extensive experiments show the efficiency and effectiveness of our approach. Furthermore, we provide guidelines for extending BangA to achieve a relaxed form of differential privacy which provides stronger privacy guarantees as compared to traditional privacy definitions.

  11. Coordinated balancing of muscle oxidative metabolism through PGC-1{alpha} increases metabolic flexibility and preserves insulin sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Summermatter, Serge [Biozentrum, Division of Pharmacology/Neurobiology, University of Basel, Klingelbergstrasse 50-70, CH-4056 Basel (Switzerland); Troxler, Heinz [Division of Clinical Chemistry and Biochemistry, Department of Pediatrics, University Children' s Hospital, University of Zurich, Steinwiesstrasse 75, CH-8032 Zurich (Switzerland); Santos, Gesa [Biozentrum, Division of Pharmacology/Neurobiology, University of Basel, Klingelbergstrasse 50-70, CH-4056 Basel (Switzerland); Handschin, Christoph, E-mail: christoph.handschin@unibas.ch [Biozentrum, Division of Pharmacology/Neurobiology, University of Basel, Klingelbergstrasse 50-70, CH-4056 Basel (Switzerland)

    2011-04-29

    Highlights: {yields} PGC-1{alpha} enhances muscle oxidative capacity. {yields} PGC-1{alpha} promotes concomitantly positive and negative regulators of lipid oxidation. {yields} Regulator abundance enhances metabolic flexibility and balances oxidative metabolism. {yields} Balanced oxidation prevents detrimental acylcarnitine and ROS generation. {yields} Absence of detrimental metabolites preserves insulin sensitivity -- Abstract: The peroxisome proliferator-activated receptor {gamma} coactivator 1{alpha} (PGC-1{alpha}) enhances oxidative metabolism in skeletal muscle. Excessive lipid oxidation and electron transport chain activity can, however, lead to the accumulation of harmful metabolites and impair glucose homeostasis. Here, we investigated the effect of over-expression of PGC-1{alpha} on metabolic control and generation of insulin desensitizing agents in extensor digitorum longus (EDL), a muscle that exhibits low levels of PGC-1{alpha} in the untrained state and minimally relies on oxidative metabolism. We demonstrate that PGC-1{alpha} induces a strictly balanced substrate oxidation in EDL by concomitantly promoting the transcription of activators and inhibitors of lipid oxidation. Moreover, we show that PGC-1{alpha} enhances the potential to uncouple oxidative phosphorylation. Thereby, PGC-1{alpha} boosts elevated, yet tightly regulated oxidative metabolism devoid of side products that are detrimental for glucose homeostasis. Accordingly, PI3K activity, an early phase marker for insulin resistance, is preserved in EDL muscle. Our findings suggest that PGC-1{alpha} coordinately coactivates the simultaneous transcription of gene clusters implicated in the positive and negative regulation of oxidative metabolism and thereby increases metabolic flexibility. Thus, in mice fed a normal chow diet, over-expression of PGC-1{alpha} does not alter insulin sensitivity and the metabolic adaptations elicited by PGC-1{alpha} mimic the beneficial effects of endurance training

  12. Coordinated balancing of muscle oxidative metabolism through PGC-1α increases metabolic flexibility and preserves insulin sensitivity

    International Nuclear Information System (INIS)

    Summermatter, Serge; Troxler, Heinz; Santos, Gesa; Handschin, Christoph

    2011-01-01

    Highlights: → PGC-1α enhances muscle oxidative capacity. → PGC-1α promotes concomitantly positive and negative regulators of lipid oxidation. → Regulator abundance enhances metabolic flexibility and balances oxidative metabolism. → Balanced oxidation prevents detrimental acylcarnitine and ROS generation. → Absence of detrimental metabolites preserves insulin sensitivity -- Abstract: The peroxisome proliferator-activated receptor γ coactivator 1α (PGC-1α) enhances oxidative metabolism in skeletal muscle. Excessive lipid oxidation and electron transport chain activity can, however, lead to the accumulation of harmful metabolites and impair glucose homeostasis. Here, we investigated the effect of over-expression of PGC-1α on metabolic control and generation of insulin desensitizing agents in extensor digitorum longus (EDL), a muscle that exhibits low levels of PGC-1α in the untrained state and minimally relies on oxidative metabolism. We demonstrate that PGC-1α induces a strictly balanced substrate oxidation in EDL by concomitantly promoting the transcription of activators and inhibitors of lipid oxidation. Moreover, we show that PGC-1α enhances the potential to uncouple oxidative phosphorylation. Thereby, PGC-1α boosts elevated, yet tightly regulated oxidative metabolism devoid of side products that are detrimental for glucose homeostasis. Accordingly, PI3K activity, an early phase marker for insulin resistance, is preserved in EDL muscle. Our findings suggest that PGC-1α coordinately coactivates the simultaneous transcription of gene clusters implicated in the positive and negative regulation of oxidative metabolism and thereby increases metabolic flexibility. Thus, in mice fed a normal chow diet, over-expression of PGC-1α does not alter insulin sensitivity and the metabolic adaptations elicited by PGC-1α mimic the beneficial effects of endurance training on muscle metabolism in this context.

  13. Impact of Building Design Parameters on Thermal Energy Flexibility in a Low-Energy Building

    OpenAIRE

    Sarran, Lucile; Foteinaki, Kyriaki; Gianniou, Panagiota; Rode, Carsten

    2017-01-01

    This work focuses on demand-side management potential for the heating grid in residential buildings. The possibility to increase the flexibility provided to the heat network through specific building design is investigated. The role of different parts of the building structure on thermal flexibility is assessed through a parameter variation on a building model. Different building designs are subjected to heat cut-offs, and flexibility is evaluated with respect to comfort preservation and heat...

  14. 76 FR 27344 - Water Resources Management Plan/Environmental Impact Statement, Mojave National Preserve, San...

    Science.gov (United States)

    2011-05-11

    ... and resource management activities must be guided by general principles that can be applied to... Resources Management Plan/Environmental Impact Statement, Mojave National Preserve, San Bernardino County... Management Plan/ Environmental Impact Statement for Mojave National Preserve. SUMMARY: In accordance with Sec...

  15. The impact of food preservation on food waste.

    Science.gov (United States)

    Martindale, Wayne; Schiebel, Walter

    2017-01-01

    The purpose of this paper is to demonstrate the relationship between food preservation and reducing consumer waste is of value in developing sustainable meal options. The research reports insights into Austrian marketplace for frozen and fresh foods that have been obtained from a consumer survey. The consumer survey methodologies indicate how preservation can change meal planning and lower food waste across frozen and fresh and ambient food purchases using freezing preservation methods. The results show food waste can be reduced by six-fold when frozen foods are compared with fresh foods. This study highlights the requirement for a greater understanding of the probability that specific foods will be wasted with respect to the frequency of purchase. This is a limitation of the current study that has been investigated by other researchers. This research has enabled the identification of different food waste amounts for different food product categories. The data presented could be used to guide food product development so that less consumer waste is produced. The research suggests a decision matrix approach can be used to can guide new product development and a model of this matrix is presented so that it may provide fit-for-purpose food preservation options for consumers. This paper will continue to highlight the overlooked value of food preservation during processing and manufacturing of foods and their preparation in households.

  16. The impact of flexible benefits plans on job satisfaction, organizational commitment and turnover intentions.

    Science.gov (United States)

    Heshizer, B

    1994-01-01

    This study assesses the dimensionality of employee attitudes toward flexible benefits plans and the impact of these plans on measures of job satisfaction, commitment and turnover intent. The study points to the need for more work on the measurement of employee attitudes toward flexible benefits and on the nomological framework of flexible benefits as a construct in compensation research.

  17. 78 FR 26067 - General Management Plan, Draft Environmental Impact Statement, Big Thicket National Preserve, Texas

    Science.gov (United States)

    2013-05-03

    .... Alternative 2, the NPS preferred alternative, would support a broad ecosystem approach for preserve management... management of cross-boundary resource issues and the importance of encouraging partnerships to address and... Management Plan, Draft Environmental Impact Statement, Big Thicket National Preserve, Texas AGENCY: National...

  18. The Impact of Hours Flexibility on Career Employment, Bridge Jobs, and the Timing of Retirement

    OpenAIRE

    Kevin E. Cahill; Michael D. Giandrea; Joseph F. Quinn

    2014-01-01

    To what extent does hours flexibility in career employment impact the retirement process? Workplace flexibility policies have the potential to improve both the welfare of employees and the business outcomes of employers. These policies, and hours flexibility in particular for older Americans, have also been touted as a way to reduce turnover. For older Americans, reductions in turnover could mean more years in career employment, fewer years in bridge employment, and little or no impact on the...

  19. Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase ECC and reduce overall system costs. In some cases, options that provide a limited increase in ECC can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

  20. Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase economic carrying capacity and reduce overall system costs. In some cases, options that provide a limited increase in economic carrying capacity can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

  1. Exploring the impact of Lean manufacturing on flexibility in SMEs

    Energy Technology Data Exchange (ETDEWEB)

    Lucherini, Franco; Rapaccini, Mario

    2017-07-01

    This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  2. Exploring the impact of Lean manufacturing on flexibility in SMEs

    International Nuclear Information System (INIS)

    Lucherini, Franco; Rapaccini, Mario

    2017-01-01

    This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  3. Exploring the impact of Lean manufacturing on flexibility in SMEs

    Directory of Open Access Journals (Sweden)

    Franco Lucherini

    2017-11-01

    Full Text Available Purpose: This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  4. Impact of information technology infrastructure flexibility on mergers and acquisitions

    NARCIS (Netherlands)

    Benitez, Jose; Ray, Gautam; Henseler, Jörg

    2018-01-01

    Although mergers and acquisitions (M&A) are a common strategy to reduce costs and pursue growth, the variance in returns from M&A is very high. This research examines how information technology (IT) infrastructure flexibility affects M&A. We use a combination of secondary as well as matched-pair

  5. Labour flexibility in SMEs: the impact of leadership

    NARCIS (Netherlands)

    Mesu, J.K.; van Riemsdijk, Maarten; Sanders, Karin

    2013-01-01

    Purpose – The purpose of this paper is to investigate the relationship between transformational and transactional leadership, and labour flexibility within small to medium-sized enterprises (SMEs). Using a sample comprising 755 employees, rating 121 supervisors within 50 Dutch small and medium-sized

  6. Monitoring recreational impacts in wilderness of Kamchatka (on example of Kronotsky State Natural Biosphere Preserve)

    Science.gov (United States)

    Anya V. Zavadskaya

    2011-01-01

    This paper describes an assessment and monitoring program that was designed and initiated for monitoring recreational impacts in a wilderness in Kamchatka. The framework of the recreational assessment was tested through its application to a case study conducted during the summers of 2008 and 2009 in the Kronotsky State Natural Biosphere Preserve (Kamchatka peninsula,...

  7. The Etiology, Incidence, and Impact of Preservation Fluid Contamination during Liver Transplantation.

    Science.gov (United States)

    Oriol, Isabel; Lladó, Laura; Vila, Marina; Baliellas, Carme; Tubau, Fe; Sabé, Núria; Fabregat, Joan; Carratalà, Jordi

    2016-01-01

    The role of contaminated preservation fluid in the development of infection after liver transplantation has not been fully elucidated. To assess the incidence and etiology of contaminated preservation fluid and determine its impact on the subsequent development of infection after liver transplantation, we prospectively studied 50 consecutive liver transplants, and cultured the following samples in each instance: preservation fluid (immediately before and at the end of the back-table procedure, and just before implantation), blood, and bile from the donor, and ascitic fluid from the recipient. When any culture was positive, blood cultures were obtained and targeted antimicrobial therapy was started. We found that the incidence of contaminated preservation fluid was 92% (46 of 50 cases of liver transplantation per year), but only 28% (14/50) were contaminated by recognized pathogens. Blood and bile cultures from the donor were positive in 28% and 6% respectively, whereas ascitic fluid was positive in 22%. The most frequently isolated microorganisms were coagulase-negative staphylococci. In nine cases, the microorganisms isolated from the preservation fluid concurred with those grown from the donor blood cultures, and in one case, the isolate matched with the one obtained from bile culture. No liver transplant recipient developed an infection due to the transmission of an organism isolated from the preservation fluid. Our findings indicate that contamination of the preservation fluid is frequent in liver transplantation, and it is mainly caused by saprophytic skin flora. Transmission of infection is low, particularly among those recipients given targeted antimicrobial treatment for organisms isolated in the preservation fluid.

  8. Impact of Weather and Occupancy on Energy Flexibility Potential of a Low-energy Building

    DEFF Research Database (Denmark)

    Zilio, Emanuele; Foteinaki, Kyriaki; Gianniou, Panagiota

    The introduction of renewable energy sources in the energy market leads to instability of the energy system itself; therefore, new solutions to increase its flexibility will become more common in the coming years. In this context the implementation of energy flexibility in buildings is evaluated...... solar radiation and the outdoor temperature appeared to have the larger impact on the thermal flexibility of the building. Specifically, the energy flexibility potential of the examined apartment can ensure its thermal autonomy up to 200 h in a typical sunny winter day......., using heat storage in the building mass. This study focuses on the influence of weather conditions and internal gains on the energy flexibility potential of a nearly-zero-energy building in Denmark. A specific six hours heating program is used to reach the scope. The main findings showed that the direct...

  9. SUPPLIER SELECTION STRATEGY AND MANUFACTURING FLEXIBILITY: IMPACT OF QUALITY AND TECHNOLOGY ROADMAPS

    Directory of Open Access Journals (Sweden)

    Muhamad Jantan

    2006-01-01

    Full Text Available The study evaluates the relationship between technology, quality, cost and delivery performance-based, supplier selection strategies, and manufacturing flexibilities namely, product flexibility, launch flexibility, and volume flexibility. Moreover, the moderating impact of supplier management strategies, namely quality roadmap and technology roadmap on the above relationships were also explored. The data for the study was drawn from a sample of companies listed in the factory directory published by the Penang Development Corporation (PDC. A postal survey of 120 manufacturers provided a return of 92 usable responses. The results reveal that the selection of suppliers based on technological and quality performance positively affects all the three dimensions of manufacturing flexibility, with complementary effects of good technology and quality roadmaps. Technology and quality roadmaps act as predictors for product and volume flexibilities. However, when launch flexibility is the focus, both technology and quality roadmaps moderate the impact of supplier selection strategies. Details of the findings, theoretical and practical implications, and the research limitation are discussed.

  10. Impact Vibration Attenuation for a Flexible Robotic Manipulator through Transfer and Dissipation of Energy

    Directory of Open Access Journals (Sweden)

    Yushu Bian

    2013-01-01

    Full Text Available Due to the presence of system flexibility, impact can excite severe large amplitude vibration responses of the flexible robotic manipulator. This impact vibration exhibits characteristics of remarkable nonlinearity and strong energy. The main goal of this study is to put forward an energy-based control method to absorb and attenuate large amplitude impact vibration of the flexible robotic manipulator. The method takes advantage of internal resonance and is implemented through a vibration absorber based on the transfer and dissipation of energy. The addition of the vibration absorber to the flexible arm generates a coupling effect between vibration modes of the system. By means of analysis on 2:1 internal resonance, the exchange of energy is proven to be existent. The impact vibrational energy can be transferred from the arm to the absorber and dissipated through the damping of the absorber. The results of numerical simulations are promising and preliminarily verify that the method is feasible and can be used to combat large amplitude impact vibration of the flexible manipulator undergoing rigid motion.

  11. Impact measurement: towards creating a flexible evaluation design ...

    African Journals Online (AJOL)

    Considering the vast array of academic literacy interventions that are presented both nationally and internationally, and the resources required to present these interventions, it is becoming increasingly important for those who are responsible for these interventions to provide evidence of their impact. The aim of this paper is ...

  12. Applying the Delphi method to assess impacts of forest management on biodiversity and habitat preservation

    DEFF Research Database (Denmark)

    Filyushkina, Anna; Strange, Niels; Löf, Magnus

    2018-01-01

    This study applied a structured expert elicitation technique, the Delphi method, to identify the impacts of five forest management alternatives and several forest characteristics on the preservation of biodiversity and habitats in the boreal zone of the Nordic countries. The panel of experts...... as a valuable addition to on-going empirical and modeling efforts. The findings could assist forest managers in developing forest management strategies that generate benefits from timber production while taking into account the trade-offs with biodiversity goals....

  13. Impact of Scheduling Flexibility on Demand Profile Flatness and User Inconvenience in Residential Smart Grid System

    Directory of Open Access Journals (Sweden)

    Naveed Ul Hassan

    2013-12-01

    Full Text Available The objective of this paper is to study the impact of scheduling flexibility on both demand profile flatness and user inconvenience in residential smart grid systems. Temporal variations in energy consumption by end users result in peaks and troughs in the aggregated demand profile. In a residential smart grid, some of these peaks and troughs can be eliminated through appropriate load balancing algorithms. However, load balancing requires user participation by allowing the grid to re-schedule some of their loads. In general, more scheduling flexibility can result in more demand profile flatness, however the resulting inconvenience to users would also increase. In this paper, our objective is to help the grid determine an appropriate amount of scheduling flexibility that it should demand from users, based on which, proper incentives can be designed. We consider three different types of scheduling flexibility (delay, advance scheduling and flexible re-scheduling in flexible loads and develop both optimal and sub-optimal scheduling algorithms. We discuss their implementation in centralized and distributed manners. We also identify the existence of a saturation point. Beyond this saturation point, any increase in scheduling flexibility does not significantly affect the flatness of the demand profile while user inconvenience continues to increase. Moreover, full participation of all the households is not required since increasing user participation only marginally increases demand profile flatness.

  14. Impact of human resources on wine supply chain flexibility, quality, and economic performance

    Directory of Open Access Journals (Sweden)

    J. L. García-Alcaraz

    2016-09-01

    Full Text Available This article assesses the impact of human resources skills on production quality, flexibility, and economic performance of La Rioja’s wine supply chain. These four elements were integrated as latent variables composed of 15 observed variables and associated through six hypotheses. Data were gathered from 64 wineries located in La Rioja, Spain, and hypotheses were validated in a structural equation model using WarpPLS v.5 software. Results indicate that human resources skills have a positive direct impact on SC flexibility and quality, but not on economic performance; however, these variables are indirectly associated through SC quality and SC flexibility.

  15. Impact of urine preservation methods and duration of storage on measured levels of environmental contaminants.

    Science.gov (United States)

    Hoppin, Jane A; Ulmer, Ross; Calafat, Antonia M; Barr, Dana B; Baker, Susan V; Meltzer, Helle M; Rønningen, Kjersti S

    2006-01-01

    Collection of urine samples in human studies involves choices regarding shipping, sample preservation, and storage that may ultimately influence future analysis. As more studies collect and archive urine samples to evaluate environmental exposures in the future, we were interested in assessing the impact of urine preservative, storage temperature, and time since collection on nonpersistent contaminants in urine samples. In spiked urine samples stored in three types of urine vacutainers (no preservative, boric acid, and chlorhexidine), we measured five groups of contaminants to assess the levels of these analytes at five time points (0, 24, 48, and 72 h, and 1 week) and at two temperatures (room temperature and 4 degrees C). The target chemicals were bisphenol A (BPA), metabolites of organophosphate (OP), carbamate, and pyrethroid insecticides, chlorinated phenols, and phthalate monoesters, and were measured using five different mass spectrometry-based methods. Three samples were analyzed at each time point, with the exception of BPA. Repeated measures analysis of variance was used to evaluate effects of storage time, temperature, and preservative. Stability was summarized with percent change in mean concentration from time 0. In general, most analytes were stable under all conditions with changes in mean concentration over time, temperature, and preservative being generally less than 20%, with the exception of the OP metabolites in the presence of boric acid. The effect of storage temperature was less important than time since collection. The precision of the laboratory measurements was high allowing us to observe small differences, which may not be important when categorizing individuals into broader exposure groups.

  16. Pick-up and impact of flexible bodies

    Science.gov (United States)

    Singh, H.; Hanna, J. A.

    2017-09-01

    Picking up, laying down, colliding, rolling, and peeling are partial-contact interactions involving moving discontinuities. We examine the balances of momentum and energy across a moving discontinuity in a string, with allowance for injection or dissipation by singular supplies. We split the energy dissipation according to its invariance properties, discuss analogies with systems of particles and connections with the literature on shocks and phase transition fronts in various bodies, and derive a compatibility relation between supplies of momentum and translation-invariant energy. For a moving contact discontinuity between a string and a smooth rigid plane in the presence of gravity, we find a surprising asymmetry between the processes of picking up and laying down, such that steady-state kinks in geometry and associated jumps in tension are not admissible during pick-up. This prediction is consistent with experimental observations. We briefly discuss related problems including the falling folded chain, peeling of an adhesive tape, and the "chain fountain". Our approach is applicable to the study of impact and locomotion, and to systems such as moored floating structures and some musical instruments that feature vibrating string and cable elements interacting with a surface.

  17. Mechanical anomaly impact on metal-oxide-semiconductor capacitors on flexible silicon fabric

    KAUST Repository

    Ghoneim, Mohamed T.; Kutbee, Arwa T.; Ghodsi Nasseri, Seyed Faizelldin; Bersuker, G.; Hussain, Muhammad Mustafa

    2014-01-01

    We report the impact of mechanical anomaly on high-κ/metal-oxide-semiconductor capacitors built on flexible silicon (100) fabric. The mechanical tests include studying the effect of bending radius up to 5 mm minimum bending radius with respect

  18. A study on ship impacting a flexible crashworthy device for protecting bridge pier

    Directory of Open Access Journals (Sweden)

    Yang Liming

    2015-01-01

    Full Text Available As the accident of a vessel impacting a bridge pier will cause serious disaster, such as destroyed bridge, sinking ship and polluting environment, the technology and method to protect bridge pier from ship collision have been widely investigated recently. Due to the huge kinetic energy of large-tonnage ship and the short time duration in the collision, the studies involve impact mechanics. A developed flexible crashworthy device has been developed to protect bridges, which consists of an outer steel-periphery, an inner steel-periphery and the rubber coating SWRCs(soft elements installed between them. When the SWRC crashworthy device is installed, the collision duration under low impact force is prolonged due to its high compliance, which results in the ship having enough time to turn its navigation direction and most of the remainder kinetic energy being carried off by the turned away ship. Consequently, both impact forces on the ship and on the bridge pier decrease markedly. This is the key reason as to why the SWRC crashworthy device can avoid the destruction of both the bridge and the ship. Based on our results of theoretical studies and numerical simulations, the present paper will propose an experiment-adopted a real ship to impact a flexible crashworthy device. The collision test has been performed 12 times with different speed, carrying capacity, and impact angle of the ship. After the experiments, the ship, flexible crashworthy device and the pier are not damaged. The experiments show that the flexible crashworthy device can turn away the impact ship, so that the ship moves along the outer part of the device, which reduces the ship impact force on the bridge pier obviously. It not only protects bridges but also avoids the damage to ships.

  19. Impact of Diagenesis on Biosignature Preservation Potential in Playa Lake Evaporites of the Verde Formation, Arizona: Implications for Mars Exploration

    Science.gov (United States)

    Shkolyar, S.; Farmer, J. D.

    2016-05-01

    We studied evaporite subfacies in the Verde Fmn., AZ. We identified diagenetic pathways and assessed how diagenesis affected biosignature preservation potential (BPP) in each. Results revealed eight pathways, each with diverse impacts on BPP.

  20. Capturing the Impact of Storage and Other Flexible Technologies on Electric System Planning

    Energy Technology Data Exchange (ETDEWEB)

    Elaine Hale, Brady Stoll, and Trieu Mai

    2016-05-01

    Power systems of the future are likely to require additional flexibility due to the operating characteristics of many clean energy technologies, particularly those relying on renewable energy sources. This subject has been well studied from an operational perspective, but it has been more difficult to incorporate into capacity expansion models (CEMs) that study investment decisions on the decadal scale. The primary purpose of this report is to present new capabilities that were developed for a particular CEM, NREL's Resource Planning Model (RPM), to better reflect the impact of variable wind and solar generation on system operations and resource adequacy, and, complementarily, to model energy-constrained flexibility resources.

  1. Impact of Flexibility of Manufacturing System Components on Competitiveness of SMEs in Northern India

    Directory of Open Access Journals (Sweden)

    Shakun Preet Kaur

    2016-01-01

    Full Text Available The present manufacturing environment is characterized by a number of changes which poses challenges to a typical manufacturing unit. Time demands a shift from the traditional manufacturing strategies as they do not fit to present market competition. A flexible systems strategy has to be designed for remaining competitive in the market and perform well. For designing strategies and policies it is important to know the factors that influence performance of the system. The aim of this paper is to assess the impact of the flexibility of manufacturing system components on competitiveness of SMEs in northern India. A questionnaire based survey was conducted in the SMEs across northern India analysing three sectors namely automotive, machine tool and light engineering (mechanical components and equipment. The study contributes to the existing literature by empirically investigating the impact of machine, material handling and worker flexibility on competitiveness of manufacturing firms. This paper presents a Structural Equation Model displaying the impact of flexibility of manufacturing system components on competitiveness of SMEs.

  2. Impacts of curatorial and research practices on the preservation of fossil hominid remains.

    Science.gov (United States)

    Le Cabec, Adeline; Toussaint, Michel

    2017-12-30

    Fossil remains are the only physical evidence of past forms of life which researchers can use to study the evolutionary biology of a species, especially regarding the human lineage. We review and consider the way in which the conditions surrounding a fossil's discovery and its use for scientific research impacts its long-term preservation. The deterioration of the body starts soon after death, continues in the sediments and only a subsample of the anatomical elements will persist and may finally be unearthed by archeologists. From their recovery onwards, fossil remains are exposed to many sources of further damage: from handling, restoration, measuring to invasive sampling. On the one hand, curators are faced with the inherent challenge of balancing their responsibility to protect fossil specimens with allowing researchers to perform specific analyses or invasive sampling detrimental to the preservation of the fossil. On the other hand, scientists may find their analyses complicated by multiple factors including taphonomy, or restoration techniques (e.g., consolidants, cleaning chemicals). We provide several historical examples illustrating the complex nature of the factors acting on fossil preservation. We discuss concerns about producing and sharing (digital) data from fossils. Finally, we also suggest and support some curatorial practices which maximize the traceability of treatments underwent by a fossil.

  3. Comparation of the impact of selected technical gases on properties of a pneumatic flexible coupling

    Directory of Open Access Journals (Sweden)

    Grega Robert

    2018-01-01

    Full Text Available An important part of the oscillating mechanical drives are flexible shaft couplings. The special use of the pneumatic flexible coupling is possibility to serve as mechanical drives tuners. Being examined in tuners mechanical drives there is also a research focus on the impact of industrial gases on the change of dynamic characteristics of pneumatic couplings. The paper investigates five different industrial gases, namely: air, helium (He-4.6, a mixture of propane and butane gas (C3H8+C4H10, argon (Ar and nitrogen (N2 to see how these gases affect the dynamic characteristics of pneumatic flexible shaft coupling with marking 4-2/70 T-C.

  4. Partition method and experimental validation for impact dynamics of flexible multibody system

    Science.gov (United States)

    Wang, J. Y.; Liu, Z. Y.; Hong, J. Z.

    2018-06-01

    The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one of the main difficulties in many engineering applications. The numerical approaches being used widely in impact analysis are mainly from two fields: multibody system dynamics (MBS) and computational solid mechanics (CSM). Approaches based on MBS provide a more efficient yet less accurate analysis of the contact/impact problems, while approaches based on CSM are well suited for particularly high accuracy needs, yet require very high computational effort. To bridge the gap between accuracy and efficiency in the dynamic simulation of a flexible multibody system with contacts/impacts, a partition method is presented considering that the contact body is divided into two parts, an impact region and a non-impact region. The impact region is modeled using the finite element method to guarantee the local accuracy, while the non-impact region is modeled using the modal reduction approach to raise the global efficiency. A three-dimensional rod-plate impact experiment is designed and performed to validate the numerical results. The principle for how to partition the contact bodies is proposed: the maximum radius of the impact region can be estimated by an analytical method, and the modal truncation orders of the non-impact region can be estimated by the highest frequency of the signal measured. The simulation results using the presented method are in good agreement with the experimental results. It shows that this method is an effective formulation considering both accuracy and efficiency. Moreover, a more complicated multibody impact problem of a crank slider mechanism is investigated to strengthen this conclusion.

  5. Preservation of metabolic flexibility in skeletal muscle by a combined use of n-3 PUFA and rosiglitazone in dietary obese mice.

    Directory of Open Access Journals (Sweden)

    Olga Horakova

    Full Text Available Insulin resistance, the key defect in type 2 diabetes (T2D, is associated with a low capacity to adapt fuel oxidation to fuel availability, i.e., metabolic inflexibility. This, in turn, contributes to a further damage of insulin signaling. Effectiveness of T2D treatment depends in large part on the improvement of insulin sensitivity and metabolic adaptability of the muscle, the main site of whole-body glucose utilization. We have shown previously in mice fed an obesogenic high-fat diet that a combined use of n-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFA and thiazolidinediones (TZDs, anti-diabetic drugs, preserved metabolic health and synergistically improved muscle insulin sensitivity. We investigated here whether n-3 LC-PUFA could elicit additive beneficial effects on metabolic flexibility when combined with a TZD drug rosiglitazone. Adult male C57BL/6N mice were fed an obesogenic corn oil-based high-fat diet (cHF for 8 weeks, or randomly assigned to various interventions: cHF with n-3 LC-PUFA concentrate replacing 15% of dietary lipids (cHF+F, cHF with 10 mg rosiglitazone/kg diet (cHF+ROSI, cHF+F+ROSI, or chow-fed. Indirect calorimetry demonstrated superior preservation of metabolic flexibility to carbohydrates in response to the combined intervention. Metabolomic and gene expression analyses in the muscle suggested distinct and complementary effects of the interventions, with n-3 LC-PUFA supporting complete oxidation of fatty acids in mitochondria and the combination with n-3 LC-PUFA and rosiglitazone augmenting insulin sensitivity by the modulation of branched-chain amino acid metabolism. These beneficial metabolic effects were associated with the activation of the switch between glycolytic and oxidative muscle fibers, especially in the cHF+F+ROSI mice. Our results further support the idea that the combined use of n-3 LC-PUFA and TZDs could improve the efficacy of the therapy of obese and diabetic patients.

  6. Impact of supply problems of preservative-free glaucoma medications on patients and hospital staff.

    Science.gov (United States)

    Shah, Shima; Theodossiades, Julia; Chapman, Kristin; Murdoch, Ian

    2015-03-01

    Glaucoma is a chronic ocular disease, which is usually managed with long-term daily medical therapy, in the form of eye drops. Patients who are intolerant to preservatives in topical medicines require preservative-free versions. From early 2011 patients attending Moorfields Eye Hospital, London, UK, started to report recurring problems with the supply of the following preservative-free glaucoma medications: Timolol 0.25% (Timoptol 0.25%, MSD UK); Dorzolamide (Trusopt, MSD UK); Dorzolamide and Timolol 0.5% (Cosopt, MSD UK). This study investigates the impact of the supply problems of these medications at Moorfields Eye Hospital from a patient, administrative and clinical perspective. Information was sought by interviewing both patients and hospital staff, and by a retrospective case note review between April 2010 and May 2013. Many hospital roles, both administrative and clinical, were involved in attempting to resolve the impact of the supply problems. All staff reported a considerable increase in their workload. At the peak of the problem, the glaucoma secretaries received about 150 enquiries per week. A review of 83 sets of patient notes, retrieved from a random sample of 125 patients, showed that 22% encountered a supply problem. Of these, more than one-third attended Moorfields Eye Hospital Accident & Emergency (A&E) for repeat supplies and 89% eventually had their medication changed. In telephone interviews with 39 of a random sample of 50 patients (a subset of the 83 notes retrieved), 59% of the interviewees reported a supply problem. Of these, one-third attended Moorfields Eye Hospital A&E for repeat supplies and half eventually required an alternative medication. Some patients reported going to considerable lengths to obtain ongoing supplies in the community. This study shows that medication supply problems can have a major impact on patients and hospital services. Supply problems occur across many fields of medicine and with increasing frequency. The

  7. Mechanical anomaly impact on metal-oxide-semiconductor capacitors on flexible silicon fabric

    KAUST Repository

    Ghoneim, Mohamed T.

    2014-06-09

    We report the impact of mechanical anomaly on high-κ/metal-oxide-semiconductor capacitors built on flexible silicon (100) fabric. The mechanical tests include studying the effect of bending radius up to 5 mm minimum bending radius with respect to breakdown voltage and leakage current of the devices. We also report the effect of continuous mechanical stress on the breakdown voltage over extended periods of times.

  8. Concentrated solar power plants impact on PV penetration level and grid flexibility under Egyptian climate

    Science.gov (United States)

    Moukhtar, Ibrahim; Elbaset, Adel A.; El Dein, Adel Z.; Qudaih, Yaser; Mitani, Yasunori

    2018-05-01

    Photovoltaic (PV) system integration in the electric grid has been increasing over the past decades. However, the impact of PV penetration on the electric grid, especially during the periods of higher and lower generation for the solar system at the middle of the day and during cloudy weather or at night respectively, limit the high penetration of solar PV system. In this research, a Concentrated Solar Power (CSP) with Thermal Energy Storage (TES) has been aggregated with PV system in order to accommodate the required electrical power during the higher and lower solar energy at all timescales. This paper analyzes the impacts of CSP on the grid-connected PV considering high penetration of PV system, particularly when no energy storages in the form of batteries are used. Two cases have been studied, the first when only PV system is integrated into the electric grid and the second when two types of solar energy (PV and CSP) are integrated. The System Advisor Model (SAM) software is used to simulate the output power of renewable energy. Simulation results show that the performance of CSP has a great impact on the penetration level of PV system and on the flexibility of the electric grid. The overall grid flexibility increases due to the ability of CSP to store and dispatch the generated power. In addition, CSP/TES itself has inherent flexibility. Therefore, CSP reduces the minimum generation constraint of the conventional generators that allows more penetration of the PV system.

  9. Flexible Work: The Impact of a New Policy on Employees' Sedentary Behavior and Physical Activity.

    Science.gov (United States)

    Olsen, Heidi M; Brown, Wendy J; Kolbe-Alexander, Tracy; Burton, Nicola W

    2018-01-01

    The aim of the study was to assess change in physical activity (PA) and sedentary behavior (SB) in office-based employees after the implementation of a flexible work policy that allowed working at home. A total of 24 employees (62% female; 40 ± 10 years) completed an online questionnaire 4 weeks pre- and 6 weeks post-implementation of the policy. Changes in PA and SB were assessed using Wilcoxon signed rank test. There were no changes in PA after the introduction of the flexible work policy (Z = -0.29, P > 0.05). Sitting time increased on days the employees worked at home (Z = -2.02, P > 0.05) and on days they worked at the office (Z = -4.16, P > 0.001). A flexible work policy may have had a negative impact on sedentary behavior in this workplace. Future work is needed to explore the potential impact on workplace sitting time.

  10. The ability of flexible car bonnets to mitigate the consequences of frontal impact with pedestrians

    Science.gov (United States)

    Stanisławek, Sebastian; Niezgoda, Tadeusz

    2018-01-01

    The paper presents the results of numerical research on a vehicle representing a Toyota Yaris passenger sedan hitting a pedestrian. A flexible car body is suggested as an interesting way to increase safety. The authors present a simple low-cost bonnet buffer concept that may mitigate the effects of frontal impact. Computer simulation was the method chosen to solve the problem efficiently. The Finite Element Method (FEM) implemented in the LS-DYNA commercial code was used. The testing procedure was based on the Euro NCAP protocol. A flexible bonnet buffer shows its usefulness in preventing casualties in typical accidents. In the best scenario, the HIC15 parameter is only 380 when such a buffer is installed. In comparison, an accident involving a car without any protection produces an HIC15 of 970, which is very dangerous for pedestrians.

  11. Digital preservation

    CERN Document Server

    Deegan, Marilyn

    2013-01-01

    Digital preservation is an issue of huge importance to the library and information profession right now. With the widescale adoption of the internet and the rise of the world wide web, the world has been overwhelmed by digital information. Digital data is being produced on a massive scale by individuals and institutions: some of it is born, lives and dies only in digital form, and it is the potential death of this data, with its impact on the preservation of culture, that is the concern of this book. So how can information professionals try to remedy this? Digital preservation is a complex iss

  12. Weathering of post-impact hydrothermal deposits from the Haughton impact structure: implications for microbial colonization and biosignature preservation.

    Science.gov (United States)

    Izawa, M R M; Banerjee, Neil R; Osinski, G R; Flemming, R L; Parnell, J; Cockell, C S

    2011-01-01

    Meteorite impacts are among the very few processes common to all planetary bodies with solid surfaces. Among the effects of impact on water-bearing targets is the formation of post-impact hydrothermal systems and associated mineral deposits. The Haughton impact structure (Devon Island, Nunavut, Canada, 75.2 °N, 89.5 °W) hosts a variety of hydrothermal mineral deposits that preserve assemblages of primary hydrothermal minerals commonly associated with secondary oxidative/hydrous weathering products. Hydrothermal mineral deposits at Haughton include intra-breccia calcite-marcasite vugs, small intra-breccia calcite or quartz vugs, intra-breccia gypsum megacryst vugs, hydrothermal pipe structures and associated surface "gossans," banded Fe-oxyhydroxide deposits, and calcite and quartz veins and coatings in shattered target rocks. Of particular importance are sulfide-rich deposits and their associated assemblage of weathering products. Hydrothermal mineral assemblages were characterized structurally, texturally, and geochemically with X-ray diffraction, micro X-ray diffraction, optical and electron microscopy, and inductively coupled plasma atomic emission spectroscopy. Primary sulfides (marcasite and pyrite) are commonly associated with alteration minerals, including jarosite (K,Na,H(3)O)Fe(3)(SO(4))(2)(OH)(6), rozenite FeSO(4)·4(H(2)O), copiapite (Fe,Mg)Fe(4)(SO(4))(6)(OH)(2)·20(H(2)O), fibroferrite Fe(SO(4))(OH)·5(H(2)O), melanterite FeSO(4)·7(H(2)O), szomolnokite FeSO(4)·H(2)O, goethite α-FeO(OH), lepidocrocite γ-FeO(OH) and ferrihydrite Fe(2)O(3)·0.5(H(2)O). These alteration assemblages are consistent with geochemical conditions that were locally very different from the predominantly circumneutral, carbonate-buffered environment at Haughton. Mineral assemblages associated with primary hydrothermal activity, and the weathering products of such deposits, provide constraints on possible microbial activity in the post-impact environment. The initial period of

  13. Capturing the Impact of Storage and Other Flexible Technologies on Electric System Planning

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Elaine [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stoll, Brady [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mai, Trieu [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    Power systems of the future are likely to require additional flexibility. This has been well studied from an operational perspective, but has been more difficult to incorporate into capacity expansion models (CEMs) that study investment decisions on the decadal scale. There are two primary reasons for this. First, the necessary input data, including cost and resource projections, for flexibility options like demand response and storage are significantly uncertain. Second, it is computationally difficult to represent both investment and operational decisions in detail, the latter being necessary to properly value system flexibility, in CEMs for realistically sized systems. In this work, we extend a particular CEM, NREL's Resource Planning Model (RPM), to address the latter issue by better representing variable generation impacts on operations, and then adding two flexible technologies to RPM's suite of investment decisions: interruptible load and utility-scale storage. This work does not develop full suites of input data for these technologies, but is rather methodological and exploratory in nature. We thus exercise these new investment decisions in the context of exploring price points and value streams needed for significant deployment in the Western Interconnection by 2030. Our study of interruptible load finds significant variation by location, year, and overall system conditions. Some locations find no system need for interruptible load even with low costs, while others build the most expensive resources offered. System needs can include planning reserve capacity needs to ensure resource adequacy, but there are also particular cases in which spinning reserve requirements drive deployment. Utility-scale storage is found to require deep cost reductions to achieve wide deployment and is found to be more valuable in some locations with greater renewable deployment. Differences between more solar- and wind-reliant regions are also found: Storage

  14. Carbon Footprint in Flexible Ureteroscopy: A Comparative Study on the Environmental Impact of Reusable and Single-Use Ureteroscopes.

    Science.gov (United States)

    Davis, Niall F; McGrath, Shannon; Quinlan, Mark; Jack, Gregory; Lawrentschuk, Nathan; Bolton, Damien M

    2018-03-01

    There are no comparative assessments on the environmental impact of endourologic instruments. We evaluated and compared the environmental impact of single-use flexible ureteroscopes with reusable flexible ureteroscopes. An analysis of the typical life cycle of the LithoVue™ (Boston Scientific) single-use digital flexible ureteroscope and Olympus Flexible Video Ureteroscope (URV-F) was performed. To measure the carbon footprint, data were obtained on manufacturing of single-use and reusable flexible ureteroscopes and from typical uses obtained with a reusable scope, including repairs, replacement instruments, and ultimate disposal of both ureteroscopes. The solid waste generated (kg) and energy consumed (kWh) during each case were quantified and converted into their equivalent mass of carbon dioxide (kg of CO 2 ) released. Flexible ureteroscopic raw materials composed of plastic (90%), steel (4%), electronics (4%), and rubber (2%). The manufacturing cost of a flexible ureteroscope was 11.49 kg of CO 2 per 1 kg of ureteroscope. The weight of the single-use LithoVue and URV-F flexible ureteroscope was 0.3 and 1 kg, respectively. The total carbon footprint of the lifecycle assessment of the LithoVue was 4.43 kg of CO 2 per endourologic case. The total carbon footprint of the lifecycle of the reusable ureteroscope was 4.47 kg of CO 2 per case. The environmental impacts of the reusable flexible ureteroscope and the single-use flexible ureteroscope are comparable. Urologists should be aware that the typical life cycle of urologic instruments is a concerning source of environmental emissions.

  15. Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications

    Science.gov (United States)

    Hassoon, O. H.; Tarfaoui, M.; El Moumen, A.; Benyahia, H.; Nachtane, M.

    2018-06-01

    The deformable composite structures subjected to water-entry impact can be caused a phenomenon called hydroelastic effect, which can modified the fluid flow and estimated hydrodynamic loads comparing with rigid body. This is considered very important for ship design engineers to predict the global and the local hydrodynamic loads. This paper presents a numerical model to simulate the slamming water impact of flexible composite panels using an explicit finite element method. In order to better describe the hydroelastic influence and mechanical properties, composite materials panels with different stiffness and under different impact velocities with deadrise angle of 100 have been studied. In the other hand, the inertia effect was observed in the early stage of the impact that relative to the loading rate. Simulation results have been indicated that the lower stiffness panel has a higher hydroelastic effect and becomes more important when decreasing of the deadrise angle and increasing the impact velocity. Finally, the simulation results were compared with the experimental data and the analytical approaches of the rigid body to describe the behavior of the hydroelastic influence.

  16. Mandibular reconstruction using a titanium plate: the impact of radiation therapy on plate preservation

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Janice K; Stern, Robin L; Robinson, Marilyn G; Bowers, Michael K; Kubo, Hideo D; Donald, Paul J; Rosenthal, Seth A; Fu, Karen K

    1995-06-15

    bone-equivalent phantom. Conclusions: The impact of radiation therapy on plate preservation after mandibular reconstructive surgery using a titanium plate may be dependent on the timing of RT relative to surgery. Significantly more mandibular reconstruction plates were lost when the involved mandible received RT in the perioperative period than when RT was delivered beyond 10 months from surgery or when no RT was given. The use of alloplastic implants such as titanium plates in conjunction with myocutaneous flap coverage for mandibular reconstruction is attractive because it allows immediate reconstruction of the defect and promotes a good functional and cosmetic result; however, administration of perioperative RT may result in a higher plate failure rate.

  17. Geometric nonlinear effects on the planar dynamics of a pivoted flexible beam encountering a point-surface impact

    International Nuclear Information System (INIS)

    Li Qing; Wang Tianshu; Ma Xingrui

    2009-01-01

    Flexible-body modeling with geometric nonlinearities remains a hot topic of research by applications in multibody system dynamics undergoing large overall motions. However, the geometric nonlinear effects on the impact dynamics of flexible multibody systems have attracted significantly less attention. In this paper, a point-surface impact problem between a rigid ball and a pivoted flexible beam is investigated. The Hertzian contact law is used to describe the impact process, and the dynamic equations are formulated in the floating frame of reference using the assumed mode method. The two important geometric nonlinear effects of the flexible beam are taken into account, i.e., the longitudinal foreshortening effect due to the transverse deformation, and the stress stiffness effect due to the axial force. The simulation results show that good consistency can be obtained with the nonlinear finite element program ABAQUS/Explicit if proper geometric nonlinearities are included in the floating frame formulation. Specifically, only the foreshortening effect should be considered in a pure transverse impact for efficiency, while the stress stiffness effect should be further considered in an oblique case with much more computational effort. It also implies that the geometric nonlinear effects should be considered properly in the impact dynamic analysis of more general flexible multibody systems

  18. The Impact of Hydrochloride Heroin on Mental Flexibility, Abstract Reasoning, Impulsivity, and Attention

    Directory of Open Access Journals (Sweden)

    Zahra Alam Mehrjerdi

    2011-04-01

    Full Text Available Introduction: Drug addiction could lead to severe impairments in executive and neurocognitive functions but study on the impact of hydrochloride heroin on executive functions has remained in infancy in Iran. The aim of this study was to examine the relationship between addiction to hydrochloride heroin and executive functioning in several cognitive domains including mental flexibility, abstract reasoning, impulsivity, and attention. Methods: A total of 60 cases of young male addicts aged 18 to 21 were recruited from outpatient addiction clinics in Karaj city and were matched with 60 non-drug using controls. A test battery including the Wisconsin Card Sorting Test (WCST, Porteus Maze Test (PMQS, Serial Seven Subtraction Test (SSST, and Color Trails Test (CTT were administered respectively. Results: The patient group showed more problems in impulse control compared with the control group, while mental flexibility, abstract reasoning and attention were not affected. Discussion: The findings indicated that addiction to hydrochloride heroin had a negative effect on impulse control. This issue could reflect the role of impaired inhibitory control on drug-seeking behaviors and relapse. Special treatment programs must be tailored to control impulsivity among addicts to hydrochloride heroin during treatment.

  19. Docking ligands into flexible and solvated macromolecules. 7. Impact of protein flexibility and water molecules on docking-based virtual screening accuracy.

    Science.gov (United States)

    Therrien, Eric; Weill, Nathanael; Tomberg, Anna; Corbeil, Christopher R; Lee, Devin; Moitessier, Nicolas

    2014-11-24

    The use of predictive computational methods in the drug discovery process is in a state of continual growth. Over the last two decades, an increasingly large number of docking tools have been developed to identify hits or optimize lead molecules through in-silico screening of chemical libraries to proteins. In recent years, the focus has been on implementing protein flexibility and water molecules. Our efforts led to the development of Fitted first reported in 2007 and further developed since then. In this study, we wished to evaluate the impact of protein flexibility and occurrence of water molecules on the accuracy of the Fitted docking program to discriminate active compounds from inactive compounds in virtual screening (VS) campaigns. For this purpose, a total of 171 proteins cocrystallized with small molecules representing 40 unique enzymes and receptors as well as sets of known ligands and decoys were selected from the Protein Data Bank (PDB) and the Directory of Useful Decoys (DUD), respectively. This study revealed that implementing displaceable crystallographic or computationally placed particle water molecules and protein flexibility can improve the enrichment in active compounds. In addition, an informed decision based on library diversity or research objectives (hit discovery vs lead optimization) on which implementation to use may lead to significant improvements.

  20. Modelling the impact of regional uplift and local tectonics on fluvial terrace preservation.

    NARCIS (Netherlands)

    Viveen, W.; Schoorl, J.M.; Veldkamp, A.; Balen, van R.T.

    2014-01-01

    A terrace formation model (TERRACE) combined with a longitudinal river profile model (FLUVER) was used to simulate fluvial terrace formation and preservation in the northwest Iberian lower Miño River basin under the influence of three tectonic conditions; namely regional vertical uplift, local basin

  1. Evaluation of the impact of RNA preservation methods of spiders for de novo transcriptome assembly.

    Science.gov (United States)

    Kono, Nobuaki; Nakamura, Hiroyuki; Ito, Yusuke; Tomita, Masaru; Arakawa, Kazuharu

    2016-05-01

    With advances in high-throughput sequencing technologies, de novo transcriptome sequencing and assembly has become a cost-effective method to obtain comprehensive genetic information of a species of interest, especially in nonmodel species with large genomes such as spiders. However, high-quality RNA is essential for successful sequencing, and sample preservation conditions require careful consideration for the effective storage of field-collected samples. To this end, we report a streamlined feasibility study of various storage conditions and their effects on de novo transcriptome assembly results. The storage parameters considered include temperatures ranging from room temperature to -80°C; preservatives, including ethanol, RNAlater, TRIzol and RNAlater-ICE; and sample submersion states. As a result, intact RNA was extracted and assembly was successful when samples were preserved at low temperatures regardless of the type of preservative used. The assemblies as well as the gene expression profiles were shown to be robust to RNA degradation, when 30 million 150-bp paired-end reads are obtained. The parameters for sample storage, RNA extraction, library preparation, sequencing and in silico assembly considered in this work provide a guideline for the study of field-collected samples of spiders. © 2015 John Wiley & Sons Ltd.

  2. Impact of flexible scheduling on employee performance regarding stress and work-family conflict

    OpenAIRE

    Raja Abdul Ghafoor Khan; Furqan Ahmad Khan; Dr. Muhammad Aslam Khan; Mohsin Shakeel

    2011-01-01

    Stress, work-family conflicts and flexible scheduling are three of the most important elements in organizational studies. The focus of current study is to understand the effect of Stress,work family conflicts and flexible scheduling on employee’s performance and also to understand whether flexible scheduling helps in reducing stress and work-family conflicts or not. The back bone of this study is the secondary data comprised of comprehensive literature review. A survey has also been conducted...

  3. Flexible Working in the UK and its Impact on Couples' Time Coordination

    OpenAIRE

    Bryan, M.L.; Sevilla, A.

    2017-01-01

    The ability to combine work with quality time together as a family is at the heart of the\\ud concept of work-life balance. Using previously unexploited data on couples work\\ud schedules we investigate the effect of flexible working on couples coordination of their\\ud daily work schedules in the UK. We consider three distinct dimensions of flexible\\ud working: flexibility of daily start and finish times (flexitime), flexibility of work times\\ud over the year (annualized hours), and generalized...

  4. The business model impact of flexible spectrum management and cognitive networks

    NARCIS (Netherlands)

    Delaere, S.; Ballon, P.

    2007-01-01

    Purpose - This paper aims to give a short overview of European Union policy trends towards more flexible forms of spectrum management. Design/methodology/approach - The paper presents a business modelling analysis, scenario construction, policy analysis and roadmapping. It argues that both flexible

  5. The Impact of a Flexible Assessment System on Students' Motivation, Performance and Attitude

    Science.gov (United States)

    Pacharn, Parunchana; Bay, Darlene; Felton, Sandra

    2013-01-01

    We examine a flexible assessment system that allows students to determine the weights allocated to each course component and to re-allocate the weights in response to achieved scores. The flexibility is intended to encourage students' participation in the learning process, thereby promoting self-regulated learning skills. We compare this…

  6. The Flexible Solar Utility. Preparing for Solar's Impacts to Utility Planning and Operations

    Energy Technology Data Exchange (ETDEWEB)

    Sterling, John [Solar Electric Power Association (SEPA), Washington, DC (United States); Davidovich, Ted [Solar Electric Power Association (SEPA), Washington, DC (United States); Cory, Karlynn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aznar, Alexandra [National Renewable Energy Lab. (NREL), Golden, CO (United States); McLaren, Joyce [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    This paper seeks to provide a flexible utility roadmap for identifying the steps that need to be taken to place the utility in the best position for addressing solar in the future. Solar growth and the emergence of new technologies will change the electric utility of tomorrow. Although not every utility, region, or market will change in the same way or magnitude, developing a path forward will be needed to reach the Electric System of the Future in the coming decades. In this report, a series of potential future states are identified that could result in drastically different energy mixes and profiles: 1) Business as Usual, 2) Low Carbon, Centralized Generation, 3) Rapid Distributed Energy Resource Growth, 4) Interactivity of Both the Grid and Demand, and 5) Grid or Load Defection. Complicating this process are a series of emerging disruptions; decisions or events that will cause the electric sector to change. Understanding and preparing for these items is critical for the transformation to any of the future states to be successful. Predicting which future state will predominate 15 years from now is not possible; however, utilities still will need to look ahead and try to anticipate how factors will impact their planning, operations, and business models. In order to dig into the potential transformations facing the utility industry, the authors conducted a series of utility interviews, held a working session at a major industry solar conference, and conducted a quantitative survey. To focus conversations, the authors leveraged the Rapid Distributed Energy Resource (DER) Growth future to draw out how utilities would have to adapt from current processes and procedures in order to manage and thrive in that new environment. Distributed solar was investigated specifically, and could serve as a proxy resource for all distributed generation (DG). It can also provide the foundation for all DERs.

  7. Impact of 10-weeks of yoga practice on flexibility and balance of college athletes

    Directory of Open Access Journals (Sweden)

    M Jay Polsgrove

    2016-01-01

    Conclusions: Results suggest that a regular yoga practice may increase the flexibility and balance as well as whole body measures of male college athletes and therefore, may enhance athletic performances that require these characteristics.

  8. The impact of cooperation and competition on the performance of flexible decentralized manufacturing networks

    Directory of Open Access Journals (Sweden)

    Hu-Song Ding

    2013-02-01

    Full Text Available Due to the mismatch between the order of costumers and the production capacity resulting from demand uncertainty, product shortages or wastes of production capacity occur. In response, the subcontracting of production among the plants occurs to diminish the influence of this mismatch on expected profits. Using a small-and medium-sized firm industrial district, the decentralized decision-making process for flexibility investment is studied using the cooperative subcontracting mechanism based on a contract net protocol and is compared with centralized decision making on the flexibility investment problem. Through simulation, it is concluded that although flexibility can increase the opportunities to obtain additional orders, the distributed decision-making mechanism increases the competition among plants during the bidding process. Plants should tradeoff these two aspects to make decisions about investments in flexibility.

  9. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    Directory of Open Access Journals (Sweden)

    Paolo Renna

    2017-03-01

    Full Text Available Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performance measures are compared with a system without any flexibility and no preventive maintenance actions. Different levels of flexibility and preventive maintenance actions are examined under a simulation environment. The simulation results highlight more important factors for the performance measures and the best combination of the factors to improve the performance.

  10. Flexible time arrangements: relevance and impact of part-time work in Switzerland

    OpenAIRE

    Krone-Germann, Irenka

    2010-01-01

    In recent labour market history, one of the most striking features has been the increase of non-standard employment arrangements. These types of arrangements refer to atypical and alternative employment arrangements which are often called flexible staffing arrangements. The utilization of these flexible labour arrangements has been, however, the source of much controversy in the last twenty years but nowadays it is becoming more and more common in the OECD countries, more specifically in Swit...

  11. Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems

    OpenAIRE

    Paolo Renna

    2017-01-01

    Manufacturing systems need to be able to work under the dynamic and uncertain production environment. Machine and routing flexibility combined with preventive maintenance actions can improve the performance of the manufacturing systems under dynamic conditions. This paper evaluates different levels of machine and routing flexibility combined with different degrees of preventive maintenance policy. The performance measures considered are throughput, work in process and throughput. The performa...

  12. Climate change impacts on German cities and actions for preserving quality of life

    Directory of Open Access Journals (Sweden)

    Schetke Sophie

    2013-01-01

    Full Text Available Also German cities -as many other cities worldwide- will be affected by impacts of climate change. Starting from the German Adaptation Strategy to climate change, the paper presents a short literature review on impacts of climate change and on fields of action for German municipalities and urban planners to adapt to it. The literature review shows that main negative impacts of climate change in Germany are due to rising temperatures and cities will also need to cope with altered precipitation regimes. But also positive impacts such as reduced heating costs are reported. Additionally, the paper highlights a second phenomenon, which also causes specific demands for urban planners regarding human health and quality of life in German cities: demographic change. Altering demographic patterns within the society will lead to altered demands for healthy living conditions. Moreover, findings from the literature show that specific groups of the society - such as the elderly - are especially vulnerable towards impacts of climate change. A concrete sensitivity towards overheating or bad air is reported. Both phenomena may simultaneously impact on German urban structures and will demand closer attention now and in the future. Consequently, specific fields of action to adapt to climate change will be presented highlighting their possible contribution sustaining quality of life in cities.

  13. Fertility preservation in women with borderline ovarian tumors - how does it impact disease outcome? A cohort study.

    Science.gov (United States)

    Helpman, Limor; Yaniv, Assaf; Beiner, Mario E; Aviel-Ronen, Sarit; Perri, Tamar; Ben-Baruch, Gilad; Hogen Ben-David, Liat; Jakobson-Setton, Ariella; Korach, Jacob

    2017-11-01

    Borderline ovarian tumors are typically indolent neoplasms. Since many are diagnosed in younger women, fertility conservation is an important consideration and has been advocated based on retrospective data. The objective of this study was to identify features impacting on recurrence and survival in a series of borderline ovarian tumors, and to assess the safety of a fertility-sparing approach. A historical cohort study of consecutive borderline ovarian tumors cases treated at a single institution over 30 years (1981-2011). Data on surgical approach (fertility-sparing or otherwise), disease stage, CA125 levels, histological features, adjuvant treatment and follow-up data were collected. Recurrence and survival were assessed using the Kaplan-Meier method and associations with the variables of interest were evaluated using a multivariate Cox proportional hazards model. 213 patients were included. Of 132 women age 40 years and below at diagnosis, 112 (85%) had a fertility-sparing procedure and 60 (46%) had conservation of an involved ovary. Fifty patients (24%) developed recurrences; fertility preservation (hazard ratio = 2.57; 95% confidence interval 1.1-6; p = 0.029) and advanced stage (hazard ratio = 4.15; 95% confidence interval 2.3-7.6; p Fertility preservation was not associated with compromised survival. Borderline ovarian tumors carry a good prognosis overall. Fertility preservation is associated with a higher risk of disease relapse; however, as most relapses are localized and may be salvaged with surgical treatment, overall survival is not compromised. © 2017 Nordic Federation of Societies of Obstetrics and Gynecology.

  14. Microbial Preservation in Sulfates in the Haughton Impact Structure Suggests Target in Search for Life on Mars

    Science.gov (United States)

    Parnell, J.; Osinski, G. R.; Lee, P.; Cockell, C. S.

    2005-01-01

    Microbes in Haughton Crater Sulfates: Impact craters are of high interest in planetary exploration because they are viewed as possible sites for evidence of life [1]. Hydrothermal systems in craters are particularly regarded as sites where primitive life could evolve. Evidence from the Miocene Haughton impact structure shows that crater hydrothermal deposits may also be a preferred site for subsequent colonization and hence possible extant life: Hydrothermal sulfates at Haughton are colonized by viable cyanobacteria [2]. The Haughton impact structure, Devon Island, Canadian High Arctic, is a 24 km-diameter crater of mid-Tertiary age. The structure preserves an exceptional record of impact-induced hydrothermal activity, including sulfide, and sulfate mineralization [3]. The target rocks excavated at the site included massive gypsum-bearing carbonate rocks of Ordovician age. Impact-remobilized sulfates occur as metre-scale masses of intergrown crystals of the clear form of gypsum selenite in veins and cavity fillings within the crater s impact melt breccia deposits [4]. The selenite is part of the hydrothermal assemblage as it was precipitated by cooling hot waters that were circulating as a result of the impact. Remobilization of the sulfate continues to the present day, such that it occurs in soil crusts (Fig. 1) including sandy beds with a gypsum cement. The sulfate-cemented beds make an interesting comparison with the sulfate-bearing sandy beds encountered by the Opportunity MER [5]. The selenite crystals are up to 0.3 m in width, of high purity, and transparent. They locally exhibit frayed margins where cleavage surfaces have separated. This exfoliation may be a response to freeze-thaw weathering. The selenite contains traces of rock detritus, newly precipitated gypsum, and microbial colonies. The rock detritus consists of sediment particles which penetrated the opened cleavages by up to 2cm from the crystal margins. Some of the detritus is cemented into place

  15. Young People's Migration and its Impact on Preserving Ethnic Features (on the Example of Kalmyks

    Directory of Open Access Journals (Sweden)

    L V Namruyeva

    2011-06-01

    Full Text Available The article views Labor migration as a means to solve unemployment problems in the republic. Migration shows not only the mobility of the population but it also reflects the life standards of the Kalmyk people in the past decade. Every year thousands of qualified specialists leave the region, which requires that they should comply with the new models of behavior and social standards that differ fundamentally from the mode of life in the agrarian Kalmyk republic. The megapolis changes the morals, values and ethnic features of labor migrants, imparting to them new elements of culture different from their ethnic nature. In the course of adaptation of Kalmyk-migrants to the conditions of the modern poly-ethnic city people tend to get estranged from their traditional ethno-environment, which eventually results in their loss of their native language and other elements of ethnic culture, unique traditions and customs gradually disappear, and the problem of preserving ethnicity in the Kalmyk diaspora arises.

  16. Impact of Building Design Parameters on Thermal Energy Flexibility in a Low-Energy Building

    DEFF Research Database (Denmark)

    Sarran, Lucile; Foteinaki, Kyriaki; Gianniou, Panagiota

    This work focuses on demand-side management potential for the heating grid in residential buildings. The possibility to increase the flexibility provided to the heat network through specific building design is investigated. The role of different parts of the building structure on thermal flexibil...

  17. Impact of Online Flexible Games on Students' Attitude towards Mathematics

    Science.gov (United States)

    Mavridis, Apostolos; Katmada, Aikaterini; Tsiatsos, Thrasyvoulos

    2017-01-01

    This study examined the effects of using an online flexible educational game on students' attitude towards mathematics as compared to the traditional method of solving mathematical problems. Moreover, the study assessed the learning effectiveness of the game and investigated potential gender differences in the game's effectiveness on changing…

  18. Environmental Education through Narrative Films: Impact of "Medicine Man" on Attitudes toward Forest Preservation

    Science.gov (United States)

    Bahk, C. Mo

    2011-01-01

    Narrative film is a multimodal, multisensual, and universal medium that has potential to reach and influence a wide range of people regarding environmental issues. The author conducted an experiment to explore the impact of film portrayals of deforestation among college students. One-hundred eighty-one undergraduate students were randomly assigned…

  19. Photochemical Cycling of Reactive Oxygen Species in Hydrothermal Springs: Impacts on Biosignature Preservation

    Science.gov (United States)

    Mave, M. A.; Hinman, N. W.; Stevens, L.

    2017-12-01

    Biosignatures can be preserved via rapid entombment by aqueous minerals in a system. Wilson et al. (2000) found that high UV flux leads to increased production of reactive oxygen species (ROS), which promote iron (Fe) oxidation, and possible accumulation on microbial surfaces, leading to detectable microfossils. Hydrogen peroxide (H2O2) is a measurable ROS that serves as proxy for less stable ROS. Overall diel cycling of H2O2 is likely controlled by changes in photoreactive speciation of Fe (McKnight et al., 1988) in Fe-rich systems. To test this hypothesis, we conducted a 48-hour photochemical field study of Elk Pool in the Norris Geyser Basin at Yellowstone National Park in July, 2017 in which we measured UVA and UVB, along with H2O2 via the scopoletin fluorescence quenching method (Holm et al., 1987). Measurements were taken every few hours, and we found that maximum ROS production occurred during maximum UV irradiation. We also ran several experiments on-site in which we collected and altered spring water to either inactivate or catalyze naturally occurring reactions as well as to isolate primary mechanisms responsible for production of H2O2. Experiments were run in UV permeable Whirlpak bags and Fisherbrand tubes. Elk Pool showed only trace Fe content (pH 4) at the time of our study, so Fe-silica coated petrographic slides were added to the tube experiments (Fe-added experiments). Both sets of experiments included filtered and unfiltered spring water to differentiate biotic from abiotic mechanisms, and both UV-exposed and dark controls to separate UV-induced mechanisms for ROS formation. UV-exposed water always had greater ROS than dark experiments. Filtered spring water had higher ROS concentrations than unfiltered water, except when Fe was added. In the Fe-added experiments, unfiltered spring water had slightly greater ROS production relative to filtered water and had the lowest pH and highest aqueous Fe content after 7 hours. All Fe-added experiments showed

  20. Debris flow risk mitigation by the means of rigid and flexible barriers – experimental tests and impact analysis

    Directory of Open Access Journals (Sweden)

    L. Canelli

    2012-05-01

    Full Text Available The impact of a debris flow on a structure can have disastrous effects because of the enormous destructive potential of this type of phenomenon. Although the introduction of risk mitigation structures such as the Sabo Dam, the filter dam and more recently flexible barriers is usual, there are very few methods that are universally recognized for the safe design of such structures. This study presents the results of experimental tests, conducted with the use of a specifically created flume, in order to obtain detailed knowledge of the mechanical aspects, and to analyze the dynamics of the impact of a debris flow on different types of structures. The analyses of the tests, together with the calculation of the thrust caused by the flow, have made it possible to analyze the dynamics of the impact, which has shown differing effects, on the basis of the type of barrier that has been installed.

  1. Preservation of Metabolic Flexibility in Skeletal Muscle by a Combined Use of n-3 PUFA and Rosiglitazone in Dietary Obese Mice

    Czech Academy of Sciences Publication Activity Database

    Horáková, Olga; Medříková, Daša; van Schothorst, E. M.; Bunschoten, A.; Flachs, Pavel; Kůs, Vladimír; Kuda, Ondřej; Bardová, Kristina; Janovská, Petra; Hensler, Michal; Rossmeisl, Martin; Wang-Sattler, R.; Prehn, C.; Adamski, J.; Illig, T.; Keijer, J.; Kopecký, Jan

    2012-01-01

    Roč. 7, č. 8 (2012), e43764 E-ISSN 1932-6203 R&D Projects: GA ČR(CZ) GA303/08/0664; GA MŠk(CZ) 7E10059 Institutional support: RVO:67985823 Keywords : n-3 LC-PUFA * TZD * muscle insulin sensitivity Subject RIV: FB - Endocrinology, Diabetology, Metabolism , Nutrition Impact factor: 3.730, year: 2012

  2. Flexible outsourcing and the impacts of labour taxation in European welfare states

    OpenAIRE

    Koskela, Erkki; Poutvaara, Panu

    2008-01-01

    In European Welfare States, low-skilled workers are typically unionized, while the wage formation of high-skilled workers is more competitive. To focus on this aspect, we analyze how flexible international outsourcing and labour taxation affect wage formation, employment and welfare in dual domestic labour markets. Higher productivity of outsourcing, lower cost of outsourcing and lower factor price of outsourcing increase wage dispersion between the high-skilled and low-skilled workers. Incre...

  3. Efficacy and flexibility impact perceived adherence barriers in pediatric kidney post-transplantation.

    Science.gov (United States)

    Guilfoyle, Shanna M; Goebel, Jens W; Pai, Ahna L H

    2011-03-01

    The alarming rates of medication nonadherence and its detrimental effect on long-term graft survival in pediatric kidney transplantation has called attention to identifying modifiable factors that promote better adherence and subsequent transplant outcomes. In a sample of 45 adolescent kidney transplant recipients (14.7 ± 3.3 years, 77.8% Caucasian, 39.5% female) and their primary caregivers, study aims included: 1) identifying sociodemographic and medical correlates of both caregiver- and patient-reported general family functioning (i.e., efficacy, flexibility, and communication) and 2) determining the unique contributions of these family functioning indices to perceived posttransplant adherence barriers. During a routine clinic visit, caregivers completed a sociodemographic form and questionnaire on general family functioning. Both caregivers and the adolescents completed a measure on perceived medication adherence barriers. Data identified household income and family structure as persistent correlates of family functioning. Familial efficacy and flexibility contributed significant variance to perceived adherence barriers. Family-based interventions enhancing modifiable family factors, such as flexibility and efficacy, in overcoming medication adherence barriers would likely promote more optimal health outcomes in the pediatric kidney transplant population. (c) 2011 APA, all rights reserved

  4. Wood preservation

    Science.gov (United States)

    Kevin Archer; Stan Lebow

    2006-01-01

    Wood preservation can be interpreted to mean protection from fire, chemical degradation, mechanical wear, weathering, as well as biological attack. In this chapter, the term preservation is applied more restrictively to protection from biological hazards.

  5. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells

    Science.gov (United States)

    Hauch, Jens A.; Schilinsky, Pavel; Choulis, Stelios A.; Rajoelson, Sambatra; Brabec, Christoph J.

    2008-09-01

    In this paper we perform accelerated lifetime testing on high efficiency flexible poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester (P3HT:PCBM) solar cells encapsulated with food package quality barrier films with a water vapor transmission rate of 0.2 g/(m2 day) at 65 °C/85% relative humidity. We show that lifetimes exceeding 1250 h, even at high temperature/high humidity conditions, may be reached, proving that organic solar cells are significantly less sensitive against the environmental effects of water and oxygen than previously expected.

  6. Influence of the structural flexibility in the evaluation of loads due to soft projectile impact

    International Nuclear Information System (INIS)

    Godoy, A.R.; Alvarez, L.M.

    1984-01-01

    It's presented a study to evaluate the influence of the structural stiffness (of flexibility) in the reaction time functions for tornado-generated projectiles, usually considered in the verification of Nuclear Power Plant Facilities. It is analyzed the evaluation of the load acting on a typical structure of the Reactor Building of a NPP and the global behaviour of the targets. The structural deformations are taken into consideration through different assumptions, such as linear or nonlinear material behaviour, rotational inertia, shear and flexural deformations and small geometric non linearities. (Author) [pt

  7. ICE911 Research: Floating Safe Inert Materials to Preserve Ice and Conserve Water in Order to Mitigate Climate Change Impacts

    Science.gov (United States)

    Field, L. A.; Manzara, A.; Chetty, S.; Venkatesh, S.; Scholtz, A.

    2015-12-01

    Ice911 Research has conducted years of field testing to develop and test localized reversible engineering techniques to mitigate the negative impacts of polar ice melt. The technology uses environmentally safe materials to reflect energy in carefully selected, limited areas from summertime polar sun. The technology is now being adapted to help with California's drought. We have tested the albedo modification technique on a small scale over seven Winter/Spring seasons at sites including California's Sierra Nevada Mountains, a Canadian lake, and a small artificial pond in Minnesota about 100 ft in diameter and 6 ft deep at the center, using various materials and an evolving array of instrumentation. On the pond in Minnesota, this year's test results for ice preservation, using hollow glass spheres deployed over our largest test areas yet, showed that glass bubbles can provide an effective material for increasing albedo, significantly reducing the melting rate of ice. This year Ice911 also undertook its first small Arctic field test in Barrow, Alaska on a lake in Barrow's BEO area, and results are still coming in. The technology that Ice911 has been developing for ice preservation has also been shown to keep small test areas of water cooler, in various small-scale tests spanning years. We believe that with some adaptations of the technology, the materials can be applied to reservoirs and lakes to help stretch these precious resources further in California's ongoing drought. There are several distinct advantages for this method over alternatives such as large reverse osmosis projects or building new reservoirs, which could possibly allow a drought-stricken state to build fewer of these more-costly alternatives. First, applying an ecologically benign surface treatment of Ice911's materials can be accomplished within a season, at a lower cost, with far less secondary environmental impact, than such capital-and-time-intensive infrastructure projects. Second, keeping

  8. Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

    Directory of Open Access Journals (Sweden)

    Åsa Grytli Tveten

    2016-12-01

    Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

  9. Effect Assessment the Impact of Filler Types on the Input Design Parameter of Flexible Pavements

    Directory of Open Access Journals (Sweden)

    Sahar S. Neham

    2017-08-01

    Full Text Available To meet the requirements of flexible pavements (safety, economy, limited the stresses on the natural subgrade and a smooth ride, good quality material of surface course must be used so to prevent pavement distresses caused by the different types of loadings (structural and environmental loadings, while the resilient modulus is important input data when flexible pavement was designed, it is selected to show its effect by different types of mineral filler as a partial replacement. In this paving mix, to improve the quality of the mix material and to represent the effect of these replacements materials on the elastic characterization by measuring the resilient modulus of hot mix asphalt (HMA: Fly Ash (FA, Ordinary Portland Cement (OPC, Hydrated Lime (HL and Silica Fume (SF are used as a partial percent of filler (Limestone Dust (LSD replacement, where these materials are locally available including (40-50 penetration grade asphalt binder. To achieve the goal of study; asphalt concrete mixes are prepared at their optimum asphalt content using Marshall Method of mix design. Four replacement percent’s were used; 0, 1.5, 3.0 and 4.5 percent by total weight of aggregate for each filler types. According to ASTM D4123 criteria (Resilient Modulus was tested by UTM¬25. Mixes modified with (FA, (OPC, (HL and (SF were found to have average improvement in the value of Resilient Modulus by (13.37, 9.63, 11.14, 24.00 % at 1.5 percent of filler replacement and by (24.54, 16.63, 18.73, 38.31 % at 3.0 percent of filler replacement also the percent of improvement is: (39.55, 26.36, 29.82, 58.30 at 4.5percent of filler replacement sequentially.

  10. ['FLEXIBLE WALLS' IN HOSPITALS - ASSESSING THE 'VALUE' OF SOCIAL IMPACT ON ARCHITECTURE].

    Science.gov (United States)

    Tal, Orna; Tal, Shy-Lee

    2018-05-01

    : The development of hospital architecture is influenced by social trends, with mutual influence. Architecture enables 'organic-design' that leads to development, growth and adaptation of the structure to changing functions. A literature review reveals different perceptions of the flexibility of adapting hospital structure to changing needs, focusing on external forces pressures (expensive technologies, budgetary constraints limiting innovation implementation and regulatory barriers), as well as patients' demands. The degree of contribution of structural changes to the measured or perceived benefit to the patient and staff, has not yet been fully assessed. Expressions of this benefit are infection-control and increasing operational efficiency by energy saving and sustainability. To examine workers' perceptions towards value-based-architecture in relation to the patient or staff in a hospital setting. A survey was conducted among health care workers who underwent management training, using a structured questionnaire. Sixty responders ranked hospital leadership and relevant professionals (engineers and architects) as key players in the decision to change architecture in a hospital; economists, doctors and nurses were ranked as less important, while patients and families were ranked the lowest. Among the factors that contribute to the 'value' of the decision were the agility to adapt to emergency, and to changing morbidity trends in an efficient way. Factors ranked as being of medium importance were the contribution to hospital profitability and, to a lesser extent, the contribution to branding and improved service. 'Flexible walls' (shifting rooms between departments according to clinical need) can provide a response to morbidity changes. Hospital workers can play a role in the process of value-based architecture, thereby improving decisions concerning hospital construction and increasing their commitment to additional quality processes.

  11. Clinical impact of culture-positive preservation fluid on solid organ transplantation: A systematic review and meta-analysis.

    Science.gov (United States)

    Oriol, Isabel; Sabé, N; Tebé, C; Veroux, M; Boin, I F S F; Carratalà, J

    2018-04-01

    Contamination of the preservation fluid (PF) used for donated organs is a potential source of post-transplant infection. However, the information on this issue is scarce. We therefore conducted a systematic review and meta-analysis to assess the incidence of culture-positive PF and its impact on solid organ transplant (SOT) recipients. Seventeen studies were identified and included. The overall incidence of culture-positive PF was 37% (95% CI: 27% to 49%), and the incidence of PF-related infections among SOT recipients with PF cultures that grew pathogenic microorganisms was 10% (95% CI: 7% to 15%). There were differences in the rates of infections due to pathogenic microorganisms between SOT recipients who received pre-emptive treatment and those who did not, but without statistical significance. The mortality rate among SOT recipients with PF-related infection was 35% (95% CI: 21% to 53%). In conclusion, although contamination of the PF of donated organs is frequent, the incidence of PF-related infection is relatively low. A closely clinical and microbiologic monitoring of the SOT recipient in case of culture-positive PF, regardless of the type of microorganism isolated might be do in order to establish a prompt diagnosis of PF-related infection. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Impact of the variation in dynamic vehicle load on flexible pavement responses

    Science.gov (United States)

    Ahsanuzzaman, Md

    The purpose of this research was to evaluate the dynamic variation in asphalt pavement critical responses due to dynamic tire load variations. An attempt was also made to develop generalized regression equations to predict the dynamic response variation in flexible pavement under various dynamic load conditions. The study used an extensive database of computed pavement response histories for five different types of sites (smooth, rough, medium rough, very rough and severely rough), two different asphalt pavement structures (thin and thick) at two temperatures (70 °F and 104 °F), subjected to a tandem axle dual tire at three speeds 25, 37 and 50 mph (40, 60 and 80 km/h). All pavement responses were determined using the 3D-Move Analysis program (Version 1.2) developed by University of Nevada, Reno. A new term called Dynamic Response Coefficient (DRC) was introduced in this study to address the variation in critical pavement responses due to dynamic loads as traditionally measured by the Dynamic Load Coefficient (DLC). While DLC represents the additional varying component of the tire load, DRC represents the additional varying component of the response value (standard deviation divided by mean response). In this study, DRC was compared with DLC for five different sites based on the roughness condition of the sites. Previous studies showed that DLC varies with vehicle speed and suspension types, and assumes a constant value for the whole pavement structure (lateral and vertical directions). On the other hand, in this study, DRC was found to be significantly varied with the asphalt pavement and function of pavement structure, road roughness conditions, temperatures, vehicle speeds, suspension types, and locations of the point of interest in the pavement. A major contribution of the study is that the variation of pavement responses due to dynamic load in a flexible pavement system can be predicted with generalized regression equations. Fitting parameters (R2) in the

  13. Assessing the impacts of ethanol and isobutanol on gaseous and particulate emissions from flexible fuel vehicles.

    Science.gov (United States)

    Karavalakis, Georgios; Short, Daniel; Russell, Robert L; Jung, Heejung; Johnson, Kent C; Asa-Awuku, Akua; Durbin, Thomas D

    2014-12-02

    This study investigated the effects of higher ethanol blends and an isobutanol blend on the criteria emissions, fuel economy, gaseous toxic pollutants, and particulate emissions from two flexible-fuel vehicles equipped with spark ignition engines, with one wall-guided direct injection and one port fuel injection configuration. Both vehicles were tested over triplicate Federal Test Procedure (FTP) and Unified Cycles (UC) using a chassis dynamometer. Emissions of nonmethane hydrocarbons (NMHC) and carbon monoxide (CO) showed some statistically significant reductions with higher alcohol fuels, while total hydrocarbons (THC) and nitrogen oxides (NOx) did not show strong fuel effects. Acetaldehyde emissions exhibited sharp increases with higher ethanol blends for both vehicles, whereas butyraldehyde emissions showed higher emissions for the butanol blend relative to the ethanol blends at a statistically significant level. Particulate matter (PM) mass, number, and soot mass emissions showed strong reductions with increasing alcohol content in gasoline. Particulate emissions were found to be clearly influenced by certain fuel parameters including oxygen content, hydrogen content, and aromatics content.

  14. Flexible staffing solutions and its impact on customer satisfaction / Richard Francis Brett

    OpenAIRE

    Brett, Richard Francis

    2007-01-01

    The face of the workplace has changed dramatically over the past decade and most organisations have to survive in a fiercely competitive global economy. The impact of the competitive changes, especially in the service environment has become critical and quality service is considered an essential strategy for success and survival in today's competitive environment. Organisations are continuously searching for ways to improve their performance and create a sustainable competitive advantage. Con...

  15. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  16. Forecasting supply and demand in nursing professions: impacts of occupational flexibility and employment structure in Germany

    Science.gov (United States)

    2013-01-01

    Background In light of Germany's ageing society, demand for nursing professionals is expected to increase in the coming years. This will pose a challenge for policy makers to increase the supply of nursing professionals. Methodology To portray the different possible developments in the supply of nursing professionals, we projected the supply of formally trained nurses and the potential supply of persons who are able to work in a nursing profession. This potential supply of nursing professionals was calculated on the basis of empirical information on occupational mobility provided by the German Microcensus 2005 (Labour Force Survey). We also calculated how the supply of full-time equivalents (FTEs) will develop if current employment structures develop in the direction of employment behaviour in nursing professions in eastern and western Germany. We then compared these different supply scenarios with two demand projections ('status quo' and 'compression of morbidity' scenarios) from Germany's Federal Statistical Office. Results Our results show that, even as early as 2005, meeting demand for FTEs in nursing professions was not arithmetically possible when only persons with formal qualification in a nursing profession were taken into account on the supply side. When additional semi-skilled nursing professionals are included in the calculation, a shortage of labour in nursing professions can be expected in 2018 when the employment structure for all nursing professionals remains the same as the employment structure seen in Germany in 2005 (demand: 'status quo scenario'). Furthermore, given an employment structure as in eastern Germany, where more nursing professionals work on a full-time basis with longer working hours, a theoretical shortage of nursing professionals could be delayed until 2024. Conclusions Our analysis of occupational flexibility in the nursing field indicates that additional potential supply could be generated by especially training more young people

  17. Forecasting supply and demand in nursing professions: impacts of occupational flexibility and employment structure in Germany.

    Science.gov (United States)

    Maier, Tobias; Afentakis, Anja

    2013-06-05

    In light of Germany's ageing society, demand for nursing professionals is expected to increase in the coming years. This will pose a challenge for policy makers to increase the supply of nursing professionals. To portray the different possible developments in the supply of nursing professionals, we projected the supply of formally trained nurses and the potential supply of persons who are able to work in a nursing profession. This potential supply of nursing professionals was calculated on the basis of empirical information on occupational mobility provided by the German Microcensus 2005 (Labour Force Survey). We also calculated how the supply of full-time equivalents (FTEs) will develop if current employment structures develop in the direction of employment behaviour in nursing professions in eastern and western Germany. We then compared these different supply scenarios with two demand projections ('status quo' and 'compression of morbidity' scenarios) from Germany's Federal Statistical Office. Our results show that, even as early as 2005, meeting demand for FTEs in nursing professions was not arithmetically possible when only persons with formal qualification in a nursing profession were taken into account on the supply side. When additional semi-skilled nursing professionals are included in the calculation, a shortage of labour in nursing professions can be expected in 2018 when the employment structure for all nursing professionals remains the same as the employment structure seen in Germany in 2005 (demand: 'status quo scenario'). Furthermore, given an employment structure as in eastern Germany, where more nursing professionals work on a full-time basis with longer working hours, a theoretical shortage of nursing professionals could be delayed until 2024. Our analysis of occupational flexibility in the nursing field indicates that additional potential supply could be generated by especially training more young people for a nursing profession as they tend to

  18. Dynamic Structural Flexible-Beam Response to a Moving Barge Train Impact Force Time-History Using Impact_Beam

    Science.gov (United States)

    2011-08-01

    White, Mohamed and Barker, 2010). The engineering formulation for Impact_Force uses the impulse momentum principle to convert the linear momentum of a...flexure the plane cross-section of a beam remains plane, i.e., the Bernoulli -Euler theory. That is, shear deformations are negligible for a slender...observation that the magnitude of the impulse is equal to the change in momentum . This allows for the introduc- tion of the force time-history into the

  19. Urine Preservative

    Science.gov (United States)

    Smith, Scott M. (Inventor); Nillen, Jeannie (Inventor)

    2001-01-01

    Disclosed is CPG, a combination of a chlorhexidine salt (such as chlorhexidine digluconate, chlorhexidine diacetate, or chlorhexidine dichloride) and n-propyl gallate that can be used at ambient temperatures as a urine preservative.

  20. Flexible Bronchoscopy.

    Science.gov (United States)

    Miller, Russell J; Casal, Roberto F; Lazarus, Donald R; Ost, David E; Eapen, George A

    2018-03-01

    Flexible bronchoscopy has changed the course of pulmonary medicine. As technology advances, the role of the flexible bronchoscope for both diagnostic and therapeutic indications is continually expanding. This article reviews the historical development of the flexible bronchoscopy, fundamental uses of the flexible bronchoscope as a tool to examine the central airways and obtain diagnostic tissue, and the indications, complications, and contraindications to flexible bronchoscopy. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Failures in risk assessment and risk management for cosmetic preservatives in Europe and the impact on public health

    DEFF Research Database (Denmark)

    Schwensen, Jakob F; White, Ian R; Thyssen, Jacob P

    2015-01-01

    BACKGROUND: In view of the current and unprecedented increase in contact allergy to methylisothiazolinone (MI), we characterized and evaluated two recent epidemics of contact allergy to preservatives used in cosmetic products to address failures in risk assessment and risk management. OBJECTIVE......: To evaluate temporal trends of preservative contact allergy. METHODS: The study population included consecutive patch tested eczema patients seen at a university hospital between 1985 and 2013. A total of 23 138 patients were investigated for a contact allergy. RESULTS: The overall prevalence of contact...... the proportion of patients with current clinical disease attributable to methyldibromo glutaronitrile contact allergy decreased significantly following the ban on its use in cosmetic products (p

  2. Evaluating the impact of flexible alcohol trading hours on violence: an interrupted time series analysis.

    Directory of Open Access Journals (Sweden)

    David K Humphreys

    Full Text Available On November 24(th 2005, the Government of England and Wales removed regulatory restrictions on the times at which licensed premises could sell alcohol. This study tests availability theory by treating the implementation of Licensing Act (2003 as a natural experiment in alcohol policy.An interrupted time series design was employed to estimate the Act's immediate and delayed impact on violence in the City of Manchester (Population 464,200. We collected police recorded rates of violence, robbery, and total crime between the 1st of February 2004 and the 31st of December 2007. Events were aggregated by week, yielding a total of 204 observations (95 pre-, and 109 post-intervention. Secondary analysis examined changes in daily patterns of violence. Pre- and post-intervention events were separated into four three-hour segments 18∶00-20∶59, 21∶00-23.59, 00∶00-02∶59, 03∶00-05∶59.Analysis found no evidence that the Licensing Act (2003 affected the overall volume of violence. However, analyses of night-time violence found a gradual and permanent shift of weekend violence into later parts of the night. The results estimated an initial increase of 27.5% between 03∶00 to 06∶00 (ω = 0.2433, 95% CI = 0.06, 0.42, which increased to 36% by the end of the study period (δ = -0.897, 95% CI = -1.02, -0.77.This study found no evidence that a national policy increasing the physical availability of alcohol affected the overall volume of violence. There was, however, evidence suggesting that the policy may be associated with changes to patterns of violence in the early morning (3 a.m. to 6 a.m..

  3. A flexible Bayesian assessment for the expected impact of data on prediction confidence for optimal sampling designs

    Science.gov (United States)

    Leube, Philipp; Geiges, Andreas; Nowak, Wolfgang

    2010-05-01

    Incorporating hydrogeological data, such as head and tracer data, into stochastic models of subsurface flow and transport helps to reduce prediction uncertainty. Considering limited financial resources available for the data acquisition campaign, information needs towards the prediction goal should be satisfied in a efficient and task-specific manner. For finding the best one among a set of design candidates, an objective function is commonly evaluated, which measures the expected impact of data on prediction confidence, prior to their collection. An appropriate approach to this task should be stochastically rigorous, master non-linear dependencies between data, parameters and model predictions, and allow for a wide variety of different data types. Existing methods fail to fulfill all these requirements simultaneously. For this reason, we introduce a new method, denoted as CLUE (Cross-bred Likelihood Uncertainty Estimator), that derives the essential distributions and measures of data utility within a generalized, flexible and accurate framework. The method makes use of Bayesian GLUE (Generalized Likelihood Uncertainty Estimator) and extends it to an optimal design method by marginalizing over the yet unknown data values. Operating in a purely Bayesian Monte-Carlo framework, CLUE is a strictly formal information processing scheme free of linearizations. It provides full flexibility associated with the type of measurements (linear, non-linear, direct, indirect) and accounts for almost arbitrary sources of uncertainty (e.g. heterogeneity, geostatistical assumptions, boundary conditions, model concepts) via stochastic simulation and Bayesian model averaging. This helps to minimize the strength and impact of possible subjective prior assumptions, that would be hard to defend prior to data collection. Our study focuses on evaluating two different uncertainty measures: (i) expected conditional variance and (ii) expected relative entropy of a given prediction goal. The

  4. The impact of a grain of sand: increasing production speed in flexible risers generates significant savings in gas production

    NARCIS (Netherlands)

    Bokhorst, E. van; Blokland, H.

    2012-01-01

    Deep-sea oil and gas production normally involves the use of flexible risers that comprise a metal carcass with a large number of enveloping layers that safeguard the integrity of the pipe system. The flexible risers are hung from a floating platform and may be supported by several floating buoys to

  5. Being flexible through customization : The impact of incubator focus and customization strategies on incubate survival and growth

    NARCIS (Netherlands)

    Vanderstraeten, J.; van Witteloostuijn, Arjen; Matthyssens, P.; Andreassi, T.

    Given the increased importance of flexibility in company development models, it is not surprising that start-up support structures such as business incubators give more attention to flexible service offerings. In this paper, we argue that an incubator’s service customization strategy is ideal in

  6. Emittance preservation

    Energy Technology Data Exchange (ETDEWEB)

    Kain, V; Arduini, G; Goddard, B; Holzer, B J; Jowett, J M; Meddahi, M; Mertens, T; Roncarolo, F; Schaumann, M; Versteegen, R; Wenninger, J [European Organization for Nuclear Research, Geneva (Switzerland)

    2012-07-01

    Emittance measurements during the LHC proton run 2011 indicated a blow-up of 20 % to 30 % from LHC injection to collisions. This presentation will show the emittance preservation throughout the different parts of the LHC cycle and discuss the current limitations on emittance determination. An overview of emittance preservation through the injector complex as function of bunch intensity will also be given. Possible sources for the observed blow-up and required tests in 2012 will be presented. Possible improvements of emittance diagnostics and analysis tools for 2012 will be shown.

  7. On flexibility

    OpenAIRE

    Weiss, Christoph R.; Briglauer, Wolfgang

    2000-01-01

    By building on theoretical work by Mills and Schumann (1985) and Ungern-Sternberg (1990) this paper provides evidence on the determinants of two dimensions of flexibility, the flexibility in adjusting aggregate output over time (tactical flexibility) as well as the ability to switch quickly between products (operational flexibility). Econometric analysis of a sample of 40.000 farms in Upper-Austria for the period 1980 to 1990 suggests that larger full-time farms operated by younger, better ed...

  8. Office-based narrow band imaging-guided flexible laryngoscopy tissue sampling: A cost-effectiveness analysis evaluating its impact on Taiwanese health insurance program

    OpenAIRE

    Fang, Tuan-Jen; Li, Hsueh-Yu; Liao, Chun-Ta; Chiang, Hui-Chen; Chen, I-How

    2015-01-01

    Narrow band imaging (NBI)-guided flexible laryngoscopy tissue sampling for laryngopharyngeal lesions is a novel technique. Patients underwent the procedure in an office-based setting without being sedated, which is different from the conventional technique performed using direct laryngoscopy. Although the feasibility and effects of this procedure were established, its financial impact on the institution and Taiwanese National Health Insurance program was not determined. Methods: This is a ...

  9. Office-based narrow band imaging-guided flexible laryngoscopy tissue sampling: A cost-effectiveness analysis evaluating its impact on Taiwanese health insurance program.

    Science.gov (United States)

    Fang, Tuan-Jen; Li, Hsueh-Yu; Liao, Chun-Ta; Chiang, Hui-Chen; Chen, I-How

    2015-07-01

    Narrow band imaging (NBI)-guided flexible laryngoscopy tissue sampling for laryngopharyngeal lesions is a novel technique. Patients underwent the procedure in an office-based setting without being sedated, which is different from the conventional technique performed using direct laryngoscopy. Although the feasibility and effects of this procedure were established, its financial impact on the institution and Taiwanese National Health Insurance program was not determined. This is a retrospective case-control study. From May 2010 to April 2011, 20 consecutive patients who underwent NBI flexible laryngoscopy tissue sampling were recruited. During the same period, another 20 age-, sex-, and lesion-matched cases were enrolled in the control group. The courses for procedures and financial status were analyzed and compared between groups. Office-based NBI flexible laryngoscopy tissue sampling procedure took 27 minutes to be completed, while 191 minutes were required for the conventional technique. Average reimbursement for each case was New Taiwan Dollar (NT$)1264 for patients undergoing office-based NBI flexible laryngoscopy tissue sampling, while NT$10,913 for those undergoing conventional direct laryngoscopy in the operation room (p institution suffered a loss of at least NT$690 when performing NBI flexible laryngoscopy tissue sampling. Office-based NBI flexible laryngoscopy tissue sampling is a cost-saving procedure for patients and the Taiwanese National Health Insurance program. It also saves the procedure time. However, the net financial loss for the institution and physician would limit its popularization unless reimbursement patterns are changed. Copyright © 2013. Published by Elsevier B.V.

  10. Outcome and Impact of Aortic Valve Replacement in Patients With Preserved LVEF and Low-Gradient Aortic Stenosis.

    Science.gov (United States)

    Dayan, Victor; Vignolo, Gustavo; Magne, Julien; Clavel, Marie-Annick; Mohty, Dania; Pibarot, Philippe

    2015-12-15

    Low mean transvalvular gradient (gradient (LG) AS and preserved left ventricular ejection fraction, including paradoxical low-flow (i.e., stroke volume index gradient (LF-LG) and normal-flow, low-gradient (NF-LG), and those with high-gradient (≥ 40 mm Hg) AS or moderate AS. Studies published between 2005 and 2015 were analyzed. Primary outcome was the survival benefit associated with AVR. Secondary outcome was overall mortality regardless of treatment. Eighteen studies were included in the analysis. Patients with LF-LG AS have increased mortality compared with patients with moderate AS (hazard ratio [HR]: 1.68; 95% confidence interval [CI]: 1.31 to 2.17), NF-LG (HR: 1.80; 95% CI: 1.29 to 2.51), and high-gradient (HR: 1.67; 95% CI: 1.16 to 2.39) AS. AVR was associated with reduced mortality in patients with LF-LG (HR: 0.44; 95% CI: 0.25 to 0.77). Similar benefit occurred with AVR in patients with NF-LG (HR: 0.48; 95% CI: 0.28 to 0.83). Compared with patients with high-gradient AS, those with LF-LG were less likely to be referred to AVR (odds ratio: 0.32; 95% CI: 0.21 to 0.49). Patients with paradoxical LF-LG AS and NF-LG AS have increased risk of mortality compared with other subtypes of AS with preserved left ventricular ejection fraction, and improved outcome with AVR. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  11. Impact of right ventricular distensibility on congestive heart failure with preserved left ventricular ejection fraction in the elderly.

    Science.gov (United States)

    Harada, Daisuke; Aasanoi, Hidetsugu; Ushijima, Ryuichi; Noto, Takahisa; Takagawa, Junya; Ishise, Hisanari; Inoue, Hiroshi

    2018-06-01

    To elucidate involvement of age-related impairments of right ventricular (RV) distensibility in the elderly congestive heart failure (CHF), we examined the prevalence of less-distensible right ventricle in patients with preserved left ventricular ejection fraction (LVEF) over a wide range of ages. In 893 patients aged from 40 to 102 years, we simultaneously recorded electrocardiogram, phonocardiogram, and jugular venous pulse wave. Using signal-processing techniques, the prominent 'Y' descent of jugular pulse waveform was detected as a hemodynamic sign of a less-distensible right ventricle. Prevalence of less-distensible right ventricle and elevated RV systolic pressure increased along with aging from the 50s to the 90s in an exponential fashion from 3.3 and 12% up to 33 and 61%, respectively (p right ventricle (Odds ratio, 1.05 per 1 year, p = 0.003; and 1.03 per 1 mmHg, p = 0.026, respectively). The elderly CHF was associated with high prevalence of the less-distensible right ventricle and higher RV systolic pressure, both of which were independent risk factors for CHF (Odds ratio, 5.27, p = 0.001, and 1.08 per 1 mmHg, p right ventricle and a high RV systolic pressure seems to be related to developing CHF. The less-distensible right ventricle and elevated RV systolic pressure are closely associated with CHF with preserved LVEF in the elderly patients.

  12. Bladder Preservation for Localized Muscle-Invasive Bladder Cancer: The Survival Impact of Local Utilization Rates of Definitive Radiotherapy

    International Nuclear Information System (INIS)

    Kozak, Kevin R.; Hamidi, Maryam; Manning, Matthew; Moody, John S.

    2012-01-01

    research into bladder preservation strategies and suggest that definitive radiotherapy represents a viable initial treatment strategy for those who wish to attempt to preserve their native bladder.

  13. Flexible workspace design and ergonomics training: impacts on the psychosocial work environment, musculoskeletal health, and work effectiveness among knowledge workers.

    Science.gov (United States)

    Robertson, Michelle M; Huang, Yueng-Hsiang; O'Neill, Michael J; Schleifer, Lawrence M

    2008-07-01

    A macroergonomics intervention consisting of flexible workspace design and ergonomics training was conducted to examine the effects on psychosocial work environment, musculoskeletal health, and work effectiveness in a computer-based office setting. Knowledge workers were assigned to one of four conditions: flexible workspace (n=121), ergonomics training (n=92), flexible workspace+ergonomics training (n=31), and a no-intervention control (n=45). Outcome measures were collected 2 months prior to the intervention and 3 and 6 months post-intervention. Overall, the study results indicated positive, significant effects on the outcome variables for the two intervention groups compared to the control group, including work-related musculoskeletal discomfort, job control, environmental satisfaction, sense of community, ergonomic climate, communication and collaboration, and business process efficiency (time and costs). However, attrition of workers in the ergonomics training condition precluded an evaluation of the effects of this intervention. This study suggests that a macroergonomics intervention is effective among knowledge workers in office settings.

  14. Conflicting flexibility

    NARCIS (Netherlands)

    De Jong, P.; Schaap, A.

    2011-01-01

    New buildings are designed for first users. For a sustainable approach there are many advantages in designing in flexibility and adjustability in order to enable and facilitate the other sequential users. For the first investor this flexibility is translated into improved exit values due to

  15. Benefit of Adjuvant Brachytherapy Versus External Beam Radiation for Early Breast Cancer: Impact of Patient Stratification on Breast Preservation

    International Nuclear Information System (INIS)

    Smith, Grace L.; Jiang, Jing; Buchholz, Thomas A.; Xu, Ying; Hoffman, Karen E.; Giordano, Sharon H.; Hunt, Kelly K.; Smith, Benjamin D.

    2014-01-01

    Purpose: Brachytherapy after lumpectomy is an increasingly popular breast cancer treatment, but data concerning its effectiveness are conflicting. Recently proposed “suitability” criteria guiding patient selection for brachytherapy have never been empirically validated. Methods: Using the Surveillance, Epidemiology, and End Results–Medicare linked database, we compared women aged 66 years or older with invasive breast cancer (n=28,718) or ductal carcinoma in situ (n=7229) diagnosed from 2002 to 2007, treated with lumpectomy alone, brachytherapy, or external beam radiation therapy (EBRT). The likelihood of breast preservation, measured by subsequent mastectomy risk, was compared by use of multivariate proportional hazards, further stratified by American Society for Radiation Oncology (ASTRO) brachytherapy suitability groups. We compared 1-year postoperative complications using the χ 2 test and 5-year local toxicities using the log-rank test. Results: For patients with invasive cancer, the 5-year subsequent mastectomy risk was 4.7% after lumpectomy alone (95% confidence interval [CI], 4.1%-5.4%), 2.8% after brachytherapy (95% CI, 1.8%-4.3%), and 1.3% after EBRT (95% CI, 1.1%-1.5%) (P<.001). Compared with lumpectomy alone, brachytherapy achieved a more modest reduction in adjusted risk (hazard ratio [HR], 0.61; 95% CI, 0.40-0.94) than achieved with EBRT (HR, 0.22; 95% CI, 0.18-0.28). Relative risks did not differ when stratified by ASTRO suitability group (P=.84 for interaction), although ASTRO “suitable” patients did show a low absolute subsequent mastectomy risk, with a minimal absolute difference in risk after brachytherapy (1.6%; 95% CI, 0.7%-3.5%) versus EBRT (0.8%; 95% CI, 0.6%-1.1%). For patients with ductal carcinoma in situ, EBRT maintained a reduced risk of subsequent mastectomy (HR, 0.40; 95% CI, 0.28-0.55; P<.001), whereas the small number of patients treated with brachytherapy (n=179) precluded definitive comparison with lumpectomy alone. In

  16. Impact of chemotherapy and definitive radiotherapy for laryngeal preservation. A comparative study of concurrent chemoradiotherapy and induction chemotherapy followed by radiation therapy

    International Nuclear Information System (INIS)

    Hiraga, Yukihiro; Kou, Junichi

    2013-01-01

    During the past 23 years, from June 1989 to December 2012, our treatment paradigm for head and neck squamous cell carcinoma (HNSCC) had involved comprehensive use of chemotherapy and radiation therapy followed by surgery. Between 1989 and 2005, chemotherapy using fluorouracil and carboplatin had been administered via intravenous drip infusion as induction chemotherapy (ICT), and more recently between 2006 and 2012 as concurrent chemoradiotherapy (CCRT). In the present study, we examined the superiority of definitive CCRT (dCCRT) over the ICT followed by definitive radiotherapy (ICT-dRT) as to the impact on the treatment of HNSCC with the stage-categories of T2-T4a, retrospectively analyzing survival rates and laryngeal preservation rates at the 3-year point between the two groups. The number of patients assigned for this study was 76, all of whom were previously untreated, and of whom 51 suffered from laryngeal carcinoma and 25 from hypopharyngeal carcinoma: 21 with Stage II, 25 with Stage III, 23 with Stage IV A, 7 with Stage IV C. The three-year overall survival rate and cause-specific survival rate were 54.5%, 73.5% in the ICT-dRT group and 69.2%, 80.5% in the dCCRT group, respectively, both of which statistically had no difference. But the dCCRT was found to contribute to obtaining a higher rate of laryngeal preservation than that of the ICT-dRT in T2 and T3 but not in T4a. In conclusion, dCCRT showed more significant efficacy for organ preservation on T2 and T3 HNSCC than ICT-dRT. (author)

  17. ENVIRONMENTAL IMPACTS AND DELIMITATION OF THE PRESERVATION AREA STANDING IN ESPINHARAS RIVER IN THE URBAN STRETCH OF THE CITY OF PATOS-PB

    Directory of Open Access Journals (Sweden)

    João Batista Alves

    2016-09-01

    Full Text Available This paper aimed to present and evaluate the proposal of the delimitation of the permanent preservation area (APP of the urban stretch of Espinharas River in the city of Patos-PB, carried out by the Superintendence and Management of the Environment - SUDEMA - Paraíba and to diagnose the main environmental impacts The demarcation was made from georeferenced points collected on the river, and the identification of the main environmental impacts. It identified a wide variation in the river rail between 10 and 50 meters, due to impacts and changes occurring in the anthropic process. The delimitation of PPA was 50 meters from the widest rail. The main impacts observed were: removal of riparian vegetation; pollution by the dumping of sewage and solid waste, siltation, invading of the banks with buildings and agricultural uses. It infers even though the lack of oversight occurs, failure of public authorities and of the local population in the search for solutions to the problems identified.

  18. Beneficial bread without preservatives

    OpenAIRE

    Denkova, Zapryana; Denkova, Rositsa

    2014-01-01

    Besides their inherent nutritional value functional foods contain substances that have beneficial impact on the functioning of organs and systems in the human body and reduce the risk of disease. Bread and bakery goods are basic foods in the diet of contemporary people. Preservatives are added to the composition of foods in order to ensure their microbiological safety, but these substances affect directly the balance of microflora in the tract. A great problem is mold and bacterial spoilage (...

  19. Does the Pulsatile Preservation Machine Have Any Impact in the Discard Rate of Kidneys From Older Donors After Brain Death?

    Science.gov (United States)

    Paredes-Zapata, D; Ruiz-Arranz, A; Rodriguez-Villar, C; Roque-Arda, R; Peri-Cusi, L; Saavedra-Escobar, S; Vizcaino-Elias, F; Garcia-Rodriguez, X; Bohils-Valle, M; Rodriguez-Peña, S; Quijada-Martorell, M; Gonzalez-Rodriguez, J-J; Oppenheimer-Salinas, F; Alcaraz-Asensio, A; Adalia-Bartolome, R

    2015-10-01

    Donors after brain death (DBD) older than 60 years have become 46.8% of our current activity, with higher risk of renal discard rate (RDR). Assessment of kidney suitability requires complementary strategies: macroscopic evaluation, kidney biopsy score (KBS), and renal hemodynamic evaluation with the Pulsatile Perfusion Machine (PPM). Descriptive, cross-sectional, comparative study of kidneys procured and RDR, comparing 3 time periods: 2000 to June 2004, when only KBS were used; July 2004 to 2008 (introduction of PPM and learning period); and 2009 to 2013 (experienced use of PPM). Transplantation criteria were KBS 70 mL/min. Between 2000 and 2013, a 59.2% reduction in DBD kidneys was observed. However, older kidneys had an increase from 33.5% to 46.8%. The RDR had increased, comparing the first to the third period from 25.4% to 38.3%. However, the RDR was lower when kidneys were evaluated with PPM than those evaluated only with KBS and preserved in cold storage (CS) (21.4% versus 43.7%). There was a significant difference in cold ischemia time, because CS kidney was grafted before PPM. During the third period, more kidneys with KBS ≥4 were assigned to PPM. Notwithstanding the decrease in DBD-procured kidneys and the increase in older kidneys during last period, the use of PPM allowed low DR compared with CS. A bias in the results of PPM could be generated when kidneys with higher KBS were excluded from PPM. The use of KBS only to decide acceptance could preclude the use of an additional tool to evaluate suitability. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Attention-deficit/hyperactivity disorder: the impact of methylphenidate on working memory, inhibition capacity and mental flexibility.

    Science.gov (United States)

    Bolfer, Cristiana; Pacheco, Sandra Pasquali; Tsunemi, Miriam Harumi; Carreira, Walter Souza; Casella, Beatriz Borba; Casella, Erasmo Barbante

    2017-04-01

    To compare children with attention-deficit/hyperactivity disorder (ADHD), before and after the use of methylphenidate, and a control group, using tests of working memory, inhibition capacity and mental flexibility. Neuropsychological tests were administrated to 53 boys, 9-12 years old: the WISC-III digit span backward, and arithmetic; Stroop Color; and Trail Making Tests. The case group included 23 boys with ADHD, who were combined type, treatment-naive, and with normal intelligence without comorbidities. The control group (n = 30) were age and gender matched. After three months on methylphenidate, the ADHD children were retested. The control group was also retested after three months. Before treatment, ADHD children had lower scores than the control group on the tests (p ≤ 0.001) and after methylphenidate had fewer test errors than before (p ≤ 0.001). Methylphenidate treatment improves the working memory, inhibitory control and mental flexibility of ADHD boys.

  1. Prospective assessment of the frequency of low gradient severe aortic stenosis with preserved left ventricular ejection fraction: Critical impact of aortic flow misalignment and pressure recovery phenomenon.

    Science.gov (United States)

    Ringle, Anne; Castel, Anne-Laure; Le Goffic, Caroline; Delelis, François; Binda, Camille; Bohbot, Yohan; Ennezat, Pierre Vladimir; Guerbaai, Raphaëlle A; Levy, Franck; Vincentelli, André; Graux, Pierre; Tribouilloy, Christophe; Maréchaux, Sylvestre

    2018-02-10

    The frequency of paradoxical low-gradient severe aortic stenosis (AS) varies widely across studies. The impact of misalignment of aortic flow and pressure recovery phenomenon on the frequency of low-gradient severe AS with preserved left ventricular ejection fraction (LVEF) has not been evaluated in prospective studies. To investigate prospectively the impact of aortic flow misalignment by Doppler and lack of pressure recovery phenomenon correction on the frequency of low-gradient (LG) severe aortic stenosis (AS) with preserved LVEF. Aortic jet velocities and mean pressure gradient (MPG) were obtained by interrogating all windows in 68 consecutive patients with normal LVEF and severe AS (aortic valve area [AVA] ≤1cm 2 ) on the basis of the apical imaging window alone (two-dimensional [2D] apical approach). Patients were classified as having LG or high-gradient (HG) AS according to MPG 35mL/m 2 or ≤35mL/m 2 , on the basis of the 2D apical approach, the multiview approach (multiple windows evaluation) and AVA corrected for pressure recovery. The proportion of LG severe AS was 57% using the 2D apical approach alone. After the multiview approach and correction for pressure recovery, the proportion of LG severe AS decreased from 57% to 13% (LF-LG severe AS decreased from 23% to 3%; NF-LG severe AS decreased from 34% to 10%). As a result, 25% of patients were reclassified as having HG severe AS (AVA ≤1cm 2 and MPG ≥40mmHg) and 19% as having moderate AS. Hence, 77% of patients initially diagnosed with LG severe AS did not have "true" LG severe AS when the multiview approach and the pressure recovery phenomenon correction were used. Aortic flow misevaluation, resulting from lack of use of multiple windows evaluation and pressure recovery phenomenon correction, accounts for a large proportion of incorrectly graded AS and considerable overestimation of the frequency of LG severe AS with preserved LVEF. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  2. Impact of emotional intelligence and flexibility on the tendency of employees to leave the organization in project based organizations

    Directory of Open Access Journals (Sweden)

    Hossein Mohammadi

    2017-12-01

    Full Text Available Sentiment is a powerful psychological force that can significantly affect employee behavior and performance. However, workplace emotions are still an issue to be studied, especially in the field of sales management in project based organizations. The purpose of this study is to investigate the effect of emotional intelligence and flexibility on the tendency of employees to leave the organization. The method of this research is descriptive correlational and in a survey method and it is a practical purpose. The statistical population of this study includes all 108 employees of the representatives of selected insurance firms in city of Zanjan, Iran. Using Cochran formula, 84 people were selected as the statistical sample. The results have indicated that while there was a positive and meaningful relationship between emotional intelligence and flexibility (r = 0.534, Sig. = 0.000, there were negative and meaningful relationships between flexibility and emotion-al intelligence on one side and intend to leave an organization on the other side.

  3. The impact of human activities on dolines (sinkholes: Typical geomorphologic features on Karst (Slovenia and possibilities of their preservation

    Directory of Open Access Journals (Sweden)

    Cernatič-Gregorič Anica

    2010-01-01

    Full Text Available This paper focuses on dolines, one of the main geomorphologic features on Karst (Slovenia. Dolines are a dominant surface feature and also a main source of fertile soil on Karst. Consequently they represent a significant element of the Karst landscape and an important part of traditional agricultural land use. Negative impacts due to rapid economic development in the last decade are affecting Karst seriously, mostly by degradation of typical landscape features. The main purpose of our work was to document the current extent of damage caused on dolines and consequently on Karst landscape. The paper discusses the gravity of the problem and points out the insufficiency of current legislation concerning landscape protection. Based on the research results the paper comments on possible consequences if the degradation process continues. .

  4. Analyzing the impacts of off-road vehicle (ORV) trails on watershed processes in Wrangell-St. Elias National Park and Preserve, Alaska.

    Science.gov (United States)

    Arp, Christopher D; Simmons, Trey

    2012-03-01

    Trails created by off-road vehicles (ORV) in boreal lowlands are known to cause local impacts, such as denuded vegetation, soil erosion, and permafrost thaw, but impacts on stream and watershed processes are less certain. In Wrangell-St. Elias National Park and Preserve (WRST), Alaska, ORV trails have caused local resource damage in intermountain lowlands with permafrost soils and abundant wetlands and there is a need to know whether these impacts are more extensive. Comparison of aerial photography from 1957, 1981, and 2004 coupled with ground surveys in 2009 reveal an increase in trail length and number and show an upslope expansion of a trail system around points of stream channel initiation. We hypothesized that these impacts could also cause premature initiation and headward expansion of channels because of lowered soil resistance and greater runoff accumulation as trails migrate upslope. Soil monitoring showed earlier and deeper thaw of the active layer in and adjacent to trails compared to reference sites. Several rainfall-runoff events during the summer of 2009 showed increased and sustained flow accumulation below trail crossings and channel shear forces sufficient to cause headward erosion of silt and peat soils. These observations of trail evolution relative to stream and wetland crossings together with process studies suggest that ORV trails are altering watershed processes. These changes in watershed processes appear to result in increasing drainage density and may also alter downstream flow regimes, water quality, and aquatic habitat. Addressing local land-use disturbances in boreal and arctic parklands with permafrost soils, such as WRST, where responses to climate change may be causing concurrent shifts in watershed processes, represents an important challenge facing resource managers.

  5. System-Level Operational and Adequacy Impact Assessment of Photovoltaic and Distributed Energy Storage, with Consideration of Inertial Constraints, Dynamic Reserve and Interconnection Flexibility

    Directory of Open Access Journals (Sweden)

    Lingxi Zhang

    2017-07-01

    Full Text Available The growing penetration of solar photovoltaic (PV systems requires a fundamental understanding of its impact at a system-level. Furthermore, distributed energy storage (DES technologies, such as batteries, are attracting great interest owing to their ability to provide support to systems with large-scale renewable generation, such as PV. In this light, the system-level impacts of PV and DES are assessed from both operational and adequacy perspectives. Different control strategies for DES are proposed, namely: (1 centralised, to support system operation in the presence of increasing requirements on system ramping and frequency control; and (2 decentralised, to maximise the harnessing of solar energy from individual households while storing electricity generated by PV panels to provide system capacity on request. The operational impacts are assessed by deploying a multi-service unit commitment model with consideration of inertial constraints, dynamic reserve allocation, and interconnection flexibility, while the impacts on adequacy of supply are analysed by assessing the capacity credit of PV and DES through different metrics. The models developed are then applied to different future scenarios for the Great Britain power system, whereby an electricity demand increase due to electrification is also considered. The numerical results highlight the importance of interconnectors to provide flexibility. On the other hand, provision of reserves, as opposed to energy arbitrage, from DES that are integrated into system operation is seen as the most effective contribution to improve system performance, which in turn also decreases the role of interconnectors. DES can also contribute to providing system capacity, but to an extent that is limited by their individual and aggregated energy availability under different control strategies.

  6. Marine reserves help preserve genetic diversity after impacts derived from climate variability: Lessons from the pink abalone in Baja California

    Directory of Open Access Journals (Sweden)

    Adrián Munguía-Vega

    2015-07-01

    Full Text Available Genetic diversity is crucial for the adaptation of exploited species like the pink abalone (Haliotis corrugata, faced with threats from climate change, overfishing and impacts associated with aquaculture production. While marine reserves are commonly used to mitigate risks to marine populations, the duration, size, location and larval connectivity needed for a reserve to help conserve genetic resources is still poorly understood. Here, we examine the effects of fishing, reserves, and restocking on the genetic diversity of 10 populations from central Baja California, Mexico, and Southern California, USA. We demonstrate that each population shows characteristic genetic signatures according to recent management decisions. We found high allelic diversity, particularly rare alleles, a larger effective population size and a lack of a recent genetic bottleneck in pink abalones within a small (0.8 km2, recently established (5 years reserve in Baja California, compared to other fished sites after a climatic bottleneck. Higher diversity may result from the presence of older animals in the reserve. Due to its location, the reserve may also act as an important hub connecting distant populations via larval dispersal. In contrast, a population from California showed genetic isolation, loss of allelic diversity and high relatedness, consistent with the collapse of fisheries in the 1990s and their lack of recovery thereafter. In addition, a fished area in Baja California with a history of restocking for over a decade showed an increase in frequency of related individuals and high genetic differentiation from nearby sites that were consistent with the production of larvae from a few adults in the laboratory. A network of strategically placed small marine reserves that considers ocean circulation patterns could help to maintain genetic diversity and connectivity of exploited populations.

  7. How Biotic Differentiation of Human Impacted Nutrient Poor Deciduous Forests Can Affect the Preservation Status of Mountain Forest Vegetation

    Directory of Open Access Journals (Sweden)

    Tomasz Durak

    2016-10-01

    Full Text Available A significant loss of biodiversity resulting from human activity has caused biotic homogenisation to become the dominant process shaping forest communities. In this paper, we present a rare case of biotic differentiation in European temperate deciduous forest herb layer vegetation. The process is occurring in nutrient poor oak-hornbeam forests in mountain areas (Polish Eastern Carpathians, Central Europe where non-timber use was converted into conventional forest management practice. This change contributed to increases in the nitrogen content and pH reaction of the soil that, contrary to predominant beliefs on the negative impact of habitat eutrophication on diversity, did not result in a decrease in the latter. We discuss possible reasons for this phenomenon that indicate the important role of tree stand composition (an increasing admixture of beech worsening the trophic properties of the soil. The second issue considered involves the effect of the changes in herb species composition of oak-hornbeam forest on its distinctiveness from the beech forest predominating in the Polish Eastern Carpathians. Unfortunately, despite the increase in the species compositional dissimilarity of oak-hornbeam forest, a reduction in their distinctiveness in relation to the herb species composition of beech forest was found. Such a phenomenon is an effect of the major fragmentation of oak-hornbeam forests, a spread of beech forest-type species, and forest management that gives preference to beech trees. Consequently, it can be expected that changes occurring in oak-hornbeam forest vegetation will contribute to a decrease in the forest vegetation variability at the regional scale.

  8. Impact of repeated uniaxial mechanical strain on flexible a-IGZO thin film transistors with symmetric and asymmetric structures

    Science.gov (United States)

    Liao, Po-Yung; Chang, Ting-Chang; Su, Wan-Ching; Chen, Bo-Wei; Chen, Li-Hui; Hsieh, Tien-Yu; Yang, Chung-Yi; Chang, Kuan-Chang; Zhang, Sheng-Dong; Huang, Yen-Yu; Chang, Hsi-Ming; Chiang, Shin-Chuan

    2017-06-01

    This letter investigates repeated uniaxial mechanical stress-induced degradation behavior in flexible amorphous In-Ga-Zn-O thin-film transistors (TFTs) of different geometric structures. Two types of via-contact structure TFTs are investigated: symmetrical and UI structure (TFTs with I- and U-shaped asymmetric electrodes). After repeated mechanical stress, I-V curves for the symmetrical structure show a significant negative threshold voltage (VT) shift, due to mechanical stress-induced oxygen vacancy generation. However, degradation in the UI structure TFTs after stress is a negative VT shift along with the parasitic transistor characteristic in the forward-operation mode, with this hump not evident in the reverse-operation mode. This asymmetrical degradation is clarified by the mechanical strain simulation of the UI TFTs.

  9. Impact of Gate Dielectric in Carrier Mobility in Low Temperature Chalcogenide Thin Film Transistors for Flexible Electronics

    KAUST Repository

    Salas-Villasenor, A. L.; Mejia, I.; Hovarth, J.; Alshareef, Husam N.; Cha, D. K.; Ramirez-Bon, R.; Gnade, B. E.; Quevedo-Lopez, M. A.

    2010-01-01

    Cadmium sulfide thin film transistors were demonstrated as the n-type device for use in flexible electronics. CdS thin films were deposited by chemical bath deposition (70° C) on either 100 nm HfO2 or SiO2 as the gate dielectrics. Common gate transistors with channel lengths of 40-100 μm were fabricated with source and drain aluminum top contacts defined using a shadow mask process. No thermal annealing was performed throughout the device process. X-ray diffraction results clearly show the hexagonal crystalline phase of CdS. The electrical performance of HfO 2 /CdS -based thin film transistors shows a field effect mobility and threshold voltage of 25 cm2 V-1 s-1 and 2 V, respectively. Improvement in carrier mobility is associated with better nucleation and growth of CdS films deposited on HfO2. © 2010 The Electrochemical Society.

  10. Impact of Gate Dielectric in Carrier Mobility in Low Temperature Chalcogenide Thin Film Transistors for Flexible Electronics

    KAUST Repository

    Salas-Villasenor, A. L.

    2010-06-29

    Cadmium sulfide thin film transistors were demonstrated as the n-type device for use in flexible electronics. CdS thin films were deposited by chemical bath deposition (70° C) on either 100 nm HfO2 or SiO2 as the gate dielectrics. Common gate transistors with channel lengths of 40-100 μm were fabricated with source and drain aluminum top contacts defined using a shadow mask process. No thermal annealing was performed throughout the device process. X-ray diffraction results clearly show the hexagonal crystalline phase of CdS. The electrical performance of HfO 2 /CdS -based thin film transistors shows a field effect mobility and threshold voltage of 25 cm2 V-1 s-1 and 2 V, respectively. Improvement in carrier mobility is associated with better nucleation and growth of CdS films deposited on HfO2. © 2010 The Electrochemical Society.

  11. Workplace flexibility.

    Science.gov (United States)

    Scordato, C; Harris, J

    1990-01-01

    Whether your organization is in a growth pattern or downsizing, you are probably facing change. To gain some insight into your options, here is an in-depth look at the problems and benefits of some flexible work arrangements from a just published study by Catalyst.

  12. Flexibility conflict?

    NARCIS (Netherlands)

    Delsen, L.W.M.; Bauer, F.; Groß, H.; Sieglen, G.

    2002-01-01

    The chapter deals with the presupposed conflict of interests between employers and employees resulting from a decoupling of operating hours and working times. It starts from the notion that both long operating hours and flexibility are relative concepts. As there is some discretion, the ultimate

  13. Could CCI or FBCI Fully Eliminate the Impact of Curve Flexibility When Evaluating the Surgery Outcome for Thoracic Curve Idiopathic Scoliosis Patient? A Retrospective Study.

    Science.gov (United States)

    Yang, Changwei; Sun, Xiaofei; Li, Chao; Ni, Haijian; Zhu, Xiaodong; Yang, Shichang; Li, Ming

    2015-01-01

    To clarify if CCI or FBCI could fully eliminate the influence of curve flexibility on the coronal correction rate. We reviewed medical record of all thoracic curve AIS cases undergoing posterior spinal fusion with all pedicle screw systems from June 2011 to July 2013. Radiographical data was collected and calculated. Student t test, Pearson correlation analysis and linear regression analysis were used to analyze the data. 60 were included in this study. The mean age was 14.7 y (10-18 y) with 10 males (17%) and 50 females (83%). The average Risser sign was 2.7. The mean thoracic Cobb angle before operation was 51.9°. The mean bending Cobb angle was 27.6° and the mean fulcrum bending Cobb angle was 17.4°. The mean Cobb angle at 2 week after surgery was 16.3°. The Pearson correlation coefficient r between CCI and BFR was -0.856(Peliminate the impact of curve flexibility on the outcome of correction. A modified CCI or FBCI can better evaluating the corrective effects of different surgical techniques or instruments.

  14. Education for Flexible Personality

    Directory of Open Access Journals (Sweden)

    Bogomir Novak

    1998-12-01

    Full Text Available Flexible personality transforms both cultural environment and itself. Post-modern personality is both contemplative and active. On one hand, it is subject to inner imagination of a creative act, and on the other hand, to creation of a tangible product What is more, flexible personality is also autonomous, mature, healthy and well balanced, as well as stable and responsive to the demand for change. Due to ever quicker changes, flexible personality is a must. And it is a task. The impact of professional work of adults on the education of children, however, is being conditioned by the exrigid family and rigid enterprises or institutions in which adults are employed. Nevertheless, flexible educational style is not repressive, as it used to be, nor permissive and totally concentrated on the child. It is a choice between the two qualities. The educators' style is dependent on their attitude towards life (play and self-education and not only towards work. Nowadays, flexibility is a way towards quality management of social and personal changes.

  15. Flexible licensing

    Directory of Open Access Journals (Sweden)

    Martyn Jansen

    2012-07-01

    Full Text Available The case is presented for a more flexible approach to licensing online library resources. Today's distributed education environment creates pressure for UK higher and further education institutions (HEI/FEIs to form partnerships and to develop educational products and roll them out across the globe. Online library resources are a key component of distributed education and yet existing licensing agreements struggle to keep pace with the increasing range of users and purposes for which they are required. This article describes the process of developing a flexible approach to licensing and proposes a new model licence for online library resources which has the adaptability needed in this new global educational landscape. These ideas have been presented and discussed at various workshops across Eduserv's and JISC Collections' higher education and publisher communities, and further consultation is ongoing.

  16. Flexible Residential Test Facility: Impact of Infiltration and Ventilation on Measured Cooling Season Energy and Moisture Levels

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Danny S. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Cummings, Jamie E. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Vieira, Robin K. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Fairey, III, Phillip W. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Sherwin, John S. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Withers, Jr., Charles [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Hoak, David [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Beal, David [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States)

    2016-09-01

    Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

  17. Flexible Residential Test Facility: Impact of Infiltration and Ventilation on Measured Cooling Season Energy and Moisture Levels

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D.; Kono, J.; Vieira, R.; Fairey, P.; Sherwin, J.; Withers, C.; Hoak, D.; Beal, D.

    2014-05-01

    Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

  18. Nonlinear dynamic response of a 'flexible-and-heavy' printed circuit board (PCB) to an impact load applied to its support contour

    International Nuclear Information System (INIS)

    Suhir, E; Vujosevic, M; Reinikainen, T

    2009-01-01

    Based on the developed simple and physically meaningful analytical ('mathematical') stress model, we evaluate some major parameters (amplitude, frequency, maximum acceleration, stresses and strains) of the response of a 'flexible-and-heavy' square simply supported printed circuit board (PCB) to an impact drop load applied to its support contour. The analysis is restricted to the first mode of vibrations and is carried out in application to the PCB design employed in an advanced accelerated test setup (test vehicle). This setup is aimed at the assessment of the performance, in accelerated test conditions on the board level, of packaging materials (and, first of all, BGA solder joint interconnections) subjected to dynamic (drop or shock) loading. It is anticipated that heavy masses could be mounted on the PCB to accelerate its dynamic response to an impact load. These masses are expected to be small in size, so that while changing the total mass of the board and generating significant inertia forces, they do not affect the board's flexural rigidity or its stiffness with respect to the in-plane loading. The PCB's contour is considered non-deformable, which is indeed the case in many practical situations. This circumstance, if the drop height and/or the induced inertia forces are significant, leads to elevated in-plane ('membrane') stresses in the PCB and, as a result of that, to the nonlinear response of the board to the impact load: the relationship between the magnitude of the load (determined by the initial impact velocity) and the induced PCB deflections becomes geometrically nonlinear, with a rigid cubic characteristic of the restoring force. The carried out numerical example, although reflects the characteristics of the PCB and loading conditions in an actual experimental setup, is merely an illustration of the general concept and is intended to demonstrate the abilities of the suggested method. Predictions based on this method agree well with the finite element

  19. Flexible Consumption

    DEFF Research Database (Denmark)

    Holm Jacobsen, Peter; Pallesen, Trine

    This report presents the first findings from our qualitative study of consumer behaviour vis-à-vis flexible consumption. The main of objective of this report is to present our first round of data from Bornholm, and to assist the design of products/services designed in WP6. In the report, we adopt...... the perspective of the consumer: what does living in a demand response setup look like to participants – and what kinds of behaviour and interest motivate – and emerge from – their participation in EcoGrid 2.0....

  20. Flexible Capitalism

    DEFF Research Database (Denmark)

    Approaching “work” as at heart a practice of exchange, this volume explores sociality in work environments marked by the kind of structural changes that have come to define contemporary “flexible” capitalism. It introduces anthropological exchange theory to a wider readership, and shows how...... the perspective offers new ways to enquire about the flexible capitalism’s social dimensions. The essays contribute to a trans-disciplinary scholarship on contemporary economic practice and change by documenting how, across diverse settings, “gift-like” socialities proliferate, and even sustain the intensified...

  1. Flexible nanovectors

    International Nuclear Information System (INIS)

    Pugno, Nicola M

    2008-01-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  2. Flexible nanovectors

    Science.gov (United States)

    Pugno, Nicola M.

    2008-11-01

    In this paper we show that the control of adhesion in highly flexible (a property that could be crucial for smart drug delivery but which is still ignored in the literature) nanovectors can help in smartly targeting and delivering the drug. The existence of and the conditions for activating and controlling a super-adhesive state are addressed. Even if such a state has never been observed in nanovectors, our calculations, as well as observations in spiders and geckos, suggest its existence and feasible control. Control of the competition between the drag and the adhesive force is exploited to improve the targeting ability and a hierarchical model is applied to describe a real vasculature. The high flexibility of the nanovector is used to smartly deliver the drug only during adhesion by nanopumping or, as a limiting case, by the new concept of 'adhesion induced nanovector implosion'; a liquid drop analogy is utilized for the calculations. Fast (pumping) and slow (diffusion) drug deliveries can thus be separately controlled by controlling the size and shape of the nanovector. Multiple stage nanovectors are also briefly discussed, mimicking aerospace vector strategies.

  3. Hyperspectral Imaging Using Flexible Endoscopy for Laryngeal Cancer Detection

    Directory of Open Access Journals (Sweden)

    Bianca Regeling

    2016-08-01

    Full Text Available Hyperspectral imaging (HSI is increasingly gaining acceptance in the medical field. Up until now, HSI has been used in conjunction with rigid endoscopy to detect cancer in vivo. The logical next step is to pair HSI with flexible endoscopy, since it improves access to hard-to-reach areas. While the flexible endoscope’s fiber optic cables provide the advantage of flexibility, they also introduce an interfering honeycomb-like pattern onto images. Due to the substantial impact this pattern has on locating cancerous tissue, it must be removed before the HS data can be further processed. Thereby, the loss of information is to minimize avoiding the suppression of small-area variations of pixel values. We have developed a system that uses flexible endoscopy to record HS cubes of the larynx and designed a special filtering technique to remove the honeycomb-like pattern with minimal loss of information. We have confirmed its feasibility by comparing it to conventional filtering techniques using an objective metric and by applying unsupervised and supervised classifications to raw and pre-processed HS cubes. Compared to conventional techniques, our method successfully removes the honeycomb-like pattern and considerably improves classification performance, while preserving image details.

  4. Impact of complete bladder neck preservation on urinary continence, quality of life and surgical margins after radical prostatectomy: a randomized, controlled, single blind trial.

    Science.gov (United States)

    Nyarangi-Dix, Joanne N; Radtke, Jan Philipp; Hadaschik, Boris; Pahernik, Sascha; Hohenfellner, Markus

    2013-03-01

    We investigated the influence of bladder neck preservation on urinary continence, quality of life and surgical margins after radical prostatectomy. A total of 208 men who presented for radical prostatectomy were randomized to complete bladder neck preservation with subsequent urethro-urethral anastomosis or to no preservation as controls. Patients with failed bladder neck preservation were not included in study. We documented objective continence by the 24-hour pad test, social continence by the number of pads per day and quality of life outcomes by the validated Incontinence Quality of Life questionnaire in a single blind setting. Cancer resection was assessed by surgical margin status. At 0, 3, 6 and 12 months mean urine loss in the control vs the bladder neck preservation group was 713.3 vs 237.0, 49.6 vs 15.6, 44.4 vs 5.5 and 25.4 vs 3.1 gm, respectively (each p <0.001). At 3, 6 and 12 months in the control vs the preservation group the social continence rate was 55.3% vs 84.2% (p <0.001), 74.8% vs 89.5% (p = 0.05) and 81.4% vs 94.7% (p = 0.027), and the quality of life score was 80.4 vs 90.3 (p <0.001), 85.4 vs 91.7 (p = 0.016) and 86.0 vs 93.8 (p = 0.001), respectively. We noted significantly less urine loss, higher objective and social continence rates, and higher quality of life scores after complete bladder neck preservation at all followup points. On multiple logistic regression analysis complete bladder neck preservation was an independent positive predictor of continence. No significant difference was found in surgical margin status between the control and bladder neck preservation groups (12.5% vs 14.7%, p = 0.65). In what is to our knowledge the first prospective, randomized, controlled, single blind trial complete bladder neck preservation during radical prostatectomy was associated with a significantly higher urinary continence rate and increased patient satisfaction without compromising resection margins. Copyright © 2013 American Urological

  5. Carrots and sticks: impact of an incentive/disincentive employee flexible credit benefit plan on health status and medical costs.

    Science.gov (United States)

    Stein, A D; Karel, T; Zuidema, R

    1999-01-01

    Employee wellness programs aim to assist in controlling employer costs by improving the health status and fitness of employees, potentially increasing productivity, decreasing absenteeism, and reducing medical claims. Most such programs offer no disincentive for nonparticipation. We evaluated an incentive/disincentive program initiated by a large teaching hospital in western Michigan. The HealthPlus Health Quotient program is an incentive/disincentive approach to health promotion. The employer's contribution to the cafeteria plan benefit package is adjusted based on results of an annual appraisal of serum cholesterol, blood pressure, tobacco use, body fat, physical fitness, motor vehicle safety, nutrition, and alcohol consumption. The adjustment (health quotient [HQ]) can range from -$25 to +$25 per pay period. We examined whether appraised health improved between 1993 and 1996 and whether the HQ predicted medical claims. Mean HQ increased slightly (+$0.47 per pay period in 1993 to +$0.89 per pay period in 1996). Individuals with HQs of less than -$10 per pay period incurred approximately twice the medical claims of the other groups (test for linear trend, p = .003). After adjustment, medical claims of employees in the worst category (HQ benefits. Most employees are impacted minimally, but savings are accruing to the employer from reductions in medical claims paid and in days lost to illness and disability.

  6. Workplace flexibility across the lifespan

    OpenAIRE

    Bal, Pieter; Jansen, Paul G W

    2016-01-01

    As demographic changes impact the workplace, governments, organizations and workers arelooking for ways to sustain optimal working lives at higher ages. Workplace flexibility has beenintroduced as a potential way workers can have more satisfying working lives until theirretirement ages. This paper presents a critical review of the literature on workplace flexibilityacross the lifespan. It discusses how flexibility has been conceptualized across differentdisciplines, and postulates a definitio...

  7. Towards Building a Blog Preservation Platform

    CERN Document Server

    Kasioumis, Nikos; Kalb, Hendrik

    2014-01-01

    Social media content and user participation has increased dramatically since the advent of Web 2.0. Blogs have become relevant to every aspect of business and personal life. Nevertheless, we do not have the right tools to aggregate and preserve blog content correctly, as well as to manage blog archives effectively. Given the rising importance of blogs, it is crucial to build systems to facilitate blog preservation, safeguarding an essential part of our heritage that will prove valuable for current and future generations. In this paper, we present our work in progress towards building a novel blog preservation platform featuring robust digital preservation, management and dissemination facilities for blogs. This work is part of the BlogForever project which is aiming to make an impact to the theory and practice of blog preservation by creating guidelines and software that any individual or organization could use to preserve their blogs.

  8. Glycerol and microwave preservation of annual statice (Limonium sinuatum Mill.)

    International Nuclear Information System (INIS)

    Paparozzi, E.T.; McCallister, D.E.

    1988-01-01

    Stems of annual statice (Limonium sinuatum Mill.) were harvested from the field in 1982 and soaked in varying concentrations of glycerol: water solutions for 24 and 48 h and then microwaved for 0, 1, 3 or 5 min. Half of the branch stems were measured for flexibility, with the remainder being assessed 1 year later. Stems harvested in 1983 were wet- and dry-stored at 3°C for varying lengths of time and then preserved. Preservation was best when statice was preserved immediately. Cold storage decreased preserved statice flexibility, but was better than air-drying. Fresh cut statice stems, up to 34 cm long, should be preserved by soaking in a 1:2 or 1:3 glycerol: water solution for 48 h followed by microwaving for 1 min at medium-high (34°C)

  9. Incentivizing Flexibility in System Operations

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Townsend, Aaron [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ela, Erik [Electric Power Research Institute; Botterud, Audun [Argonne National Laboratory; Levin, Todd [Argonne National Laboratory

    2018-02-15

    Defining flexibility has been a challenge that a number of industry members and researchers have attempted to address in recent years. With increased variability and uncertainty of variable generation (VG), the resources on the system will have to be more flexible to adjust output, so that power output ranges, power ramp rates, and energy duration sustainability are sufficient to meet the needs of balancing supply with demand at various operational timescales. This chapter discusses whether existing market designs provide adequate incentives for resources to offer their flexibility into the market to meet the increased levels of variability and uncertainty introduced by VG in the short-term operational time frame. It presents a definition of flexibility and discusses how increased levels of VG require increased needs for flexibility on power systems. Following this introductory material, the chapter examines how existing market designs ensure that resources have the right incentives to provide increased flexibility, and then discusses a number of emerging market design elements that impact flexibility incentives.

  10. Impact of a Serious Videogame Designed for Flexible Insulin Therapy on the Knowledge and Behaviors of Children with Type 1 Diabetes: The LUDIDIAB Pilot Study.

    Science.gov (United States)

    Joubert, Michael; Armand, Coline; Morera, Julia; Tokayeva, Leyla; Guillaume, Aurore; Reznik, Yves

    2016-02-01

    Flexible (or functional) insulin therapy method is a self-management education approach for intensive insulin therapy in patients with type 1 diabetes. The serious game (or applied game) "L'Affaire Birman" ("Mr. Birman's File") (available at www.gluciweb.com ) was specifically designed as an educational tool for the flexible insulin therapy method. Its educational impact was evaluated in children with type 1 diabetes. This prospective multicenter pilot study evaluated the effect of this videogame on the therapeutic knowledge and behavior of children with type 1 diabetes. PedCarbQuiz (PCQ) and Diabetes Self-Management Profile (DSMP) questionnaires were used before (T0), immediately after (T1), and 6 months after (T2) the unstructured use of the videogame. The 38 children enrolled in the study were 42% boys and 58% girls; they had a mean age of 13.7 ± 2.1 years old, a diabetes duration of 6.0 ± 3.8 years, and hemoglobin A1c (HbA1c) levels of 8.5 ± 1.4% (69.4 ± 9.4 mmol/mol). The children connected to the game 3.3 ± 2.8 times during this 6-month study. Their PCQ score increased from 31.6 ± 4.9 at T0 to 36.0 ± 4.0 at T2 (P < 0.05). Two PCQ subscores also increased significantly: the insulin titration score at T1 and T2 and the carbohydrate quantification score at T2. Conversely, the DSMP score was not different at T0, T1, and T2 (59.1 ± 9.9, 60.2 ± 9.8, and 60.0 ± 10.0, respectively), and HbA1c levels also remained stable throughout the study (8.4 ± 1.3%, 8.4 ± 1.2%, and 8.5 ± 1.5% at T0, T1, and T2, respectively). Subgroup analysis found a greater impact of the game in children with poor glycemic control and low knowledge at baseline. Adherence to the game was rather low (half of the children played less than 2.5 bouts), but no criterion was found to be predictive of this low attractiveness. Nonsupervised usage of the serious game "L'Affaire Birman" was able to improve insulin titration and

  11. Flexible Electronics Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Flexible Electronics Research Facility designs, synthesizes, tests, and fabricates materials and devices compatible with flexible substrates for Army information...

  12. Preserving Digital Materials

    CERN Document Server

    Harvey, Ross

    2011-01-01

    This book provides a single-volume introduction to the principles, strategies and practices currently applied by librarians and recordkeeping professionals to the critical issue of preservation of digital information. It incorporates practice from both the recordkeeping and the library communities, taking stock of current knowledge about digital preservation and describing recent and current research, to provide a framework for reflecting on the issues that digital preservation raises in professional practice.

  13. Environmental education on wood preservatives and preservative ...

    African Journals Online (AJOL)

    The development and use of wood preservatives in Nigeria should address not only the cost and demand functions but also the potential hazards in environmental equations. Forest products specialists are often asked about the perceived risks and environmental costs of treated wood products. Evidently, the civil society is ...

  14. Mass preserving image registration

    DEFF Research Database (Denmark)

    Gorbunova, Vladlena; Sporring, Jon; Lo, Pechin Chien Pau

    2010-01-01

    The paper presents results the mass preserving image registration method in the Evaluation of Methods for Pulmonary Image Registration 2010 (EMPIRE10) Challenge. The mass preserving image registration algorithm was applied to the 20 image pairs. Registration was evaluated using four different...

  15. Modes of fossil preservation

    Science.gov (United States)

    Schopf, J.M.

    1975-01-01

    The processes of geologic preservation are important for understanding the organisms represented by fossils. Some fossil differences are due to basic differences in organization of animals and plants, but the interpretation of fossils has also tended to be influenced by modes of preservation. Four modes of preservation generally can be distinguished: (1) Cellular permineralization ("petrifaction") preserves anatomical detail, and, occasionally, even cytologic structures. (2) Coalified compression, best illustrated by structures from coal but characteristic of many plant fossils in shale, preserves anatomical details in distorted form and produces surface replicas (impressions) on enclosing matrix. (3) Authigenic preservation replicates surface form or outline (molds and casts) prior to distortion by compression and, depending on cementation and timing, may intergrade with fossils that have been subject to compression. (4) Duripartic (hard part) preservation is characteristic of fossil skeletal remains, predominantly animal. Molds, pseudomorphs, or casts may form as bulk replacements following dissolution of the original fossil material, usually by leaching. Classification of the kinds of preservation in fossils will aid in identifying the processes responsible for modifying the fossil remains of both animals and plants. ?? 1975.

  16. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

    1985-01-01

    After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

  17. Self-preserving cosmetics.

    Science.gov (United States)

    Varvaresou, A; Papageorgiou, S; Tsirivas, E; Protopapa, E; Kintziou, H; Kefala, V; Demetzos, C

    2009-06-01

    Preservatives are added to products for two reasons: first, to prevent microbial spoilage and therefore to prolong the shelf life of the product; second, to protect the consumer from a potential infection. Although chemical preservatives prevent microbial growth, their safety is questioned by a growing segment of consumers. Therefore, there is a considerable interest in the development of preservative-free or self-preserving cosmetics. In these formulations traditional/chemical preservatives have been replaced by other cosmetic ingredients with antimicrobial properties that are not legislated as preservatives according to the Annex VI of the Commission Directive 76/768/EEC and the amending directives (2003/15/EC, 2007/17/EC and 2007/22/EC). 'Hurdle Technology', a technology that has been used for the control of product safety in the food industry since 1970s, has also been applied for the production of self-preserving cosmetics. 'Hurdle Technology' is a term used to describe the intelligent combination of different preservation factors or hurdles to deteriorate the growth of microorganisms. Adherence to current good manufacturing practice, appropriate packaging, careful choice of the form of the emulsion, low water activity and low or high pH values are significant variables for the control of microbial growth in cosmetic formulations. This paper describes the application of the basic principles of 'Hurdle Technology' in the production of self-preserving cosmetics. Multifunctional antimicrobial ingredients and plant-derived essential oils and extracts that are used as alternative or natural preservatives and are not listed in Annex VI of the Cosmetic Directive are also reported.

  18. Balance and flexibility.

    Science.gov (United States)

    2003-12-01

    The 'work-life balance' and flexible working are currently key buzz terms in the NHS. Those looking for more information on these topics should visit Flexibility at www.flexibility.co.uk for a host of resources designed to support new ways of working, including information on flexible workers and flexible rostering, the legal balancing act for work-life balance and home working.

  19. The preservation of the Agoudal impact crater, Morocco, under a landslide: Indication of a genetic link between shatter cones and meteorite fragments

    Science.gov (United States)

    Nachit, Hassane; Abia, El Hassan; Bonadiman, Costanza; Di Martino, Mario; Vaccaro, Carmela

    2017-10-01

    Geological studies and tomographic profiles of a locality nearby the Agoudal village (Morocco) showed the presence of a single impact crater, 500-600 m diameter, largely hidden by a limestone block, 220 m long and 40 m deep. The site was interpreted as a landslide that followed the fall of a cosmic body. The Agoudal impact crater was not affected by intense erosion. The lack of an evident impact structure, as well as the sporadic distribution of impactites and their limited occurrence, can be explained by a complex geological framework and by recent tectonics. The latter is the result of the sliding of limestone block, which hides almost two-thirds of the crater's depression, and the oblique fall of the meteoroid on sloping ground. In addition, some impact breccia dikes sharply cut the host rock in the Agoudal impact structure. They do not show any genetic relationship with tectonics or hydrothermal activity, nor are they related to any karst or calcrete formations. Altogether, the overlapping of the meteorite strewn field (11 km long and 3 km wide) with the area of occurrence of shatter cones and impact breccias, together with the presence of meteorite fragments (shrapnel) ejected from the crater, the presence of shatter cones contaminated by products of iron meteorites and the presence of impact breccias that contain meteorite fragments of the same chemical composition of the Agoudal meteorite indicate that the fall of this meteorite can be responsible for the formation of the impact structure.

  20. Chronopolis Digital Preservation Network

    Directory of Open Access Journals (Sweden)

    David Minor

    2010-07-01

    Full Text Available The Chronopolis Digital Preservation Initiative, one of the Library of Congress’ latest efforts to collect and preserve at-risk digital information, has completed its first year of service as a multi-member partnership to meet the archival needs of a wide range of domains.Chronopolis is a digital preservation data grid framework developed by the San Diego Supercomputer Center (SDSC at UC San Diego, the UC San Diego Libraries (UCSDL, and their partners at the National Center for Atmospheric Research (NCAR in Colorado and the University of Maryland's Institute for Advanced Computer Studies (UMIACS.Chronopolis addresses a critical problem by providing a comprehensive model for the cyberinfrastructure of collection management, in which preserved intellectual capital is easily accessible, and research results, education material, and new knowledge can be incorporated smoothly over the long term. Integrating digital library, data grid, and persistent archive technologies, Chronopolis has created trusted environments that span academic institutions and research projects, with the goal of long-term digital preservation.A key goal of the Chronopolis project is to provide cross-domain collection sharing for long-term preservation. Using existing high-speed educational and research networks and mass-scale storage infrastructure investments, the partnership is leveraging the data storage capabilities at SDSC, NCAR, and UMIACS to provide a preservation data grid that emphasizes heterogeneous and highly redundant data storage systems.In this paper we will explore the major themes within Chronopolis, including:a The philosophy and theory behind a nationally federated data grid for preservation. b The core tools and technologies used in Chronopolis. c The metadata schema that is being developed within Chronopolis for all of the data elements. d Lessons learned from the first year of the project.e Next steps in digital preservation using Chronopolis: how we

  1. Impact of mild patient prosthesis mismatch on quality of life in patients with preserved ejection fraction after isolated aortic valve replacement for aortic stenosis.

    Science.gov (United States)

    Reskovic Luksic, Vlatka; Dosen, D; Pasalic, M; Separovic Hanzevacki, Jadranka

    2017-01-15

    To analyze whether PPM affects QOL and functional status in patients after isolated AVR for aortic stenosis (AS) with preserved left ventricular ejection fraction (LVEF). Consecutive patients who underwent AVR in University Hospital Center Zagreb for isolated severe symptomatic AS and preserved EF were enrolled. Echo data was obtained from complete transthoracic examinations prior and after surgery by offline analysis. Patients were divided into two groups according to the presence of PPM (effective orifice area (EOA)/body surface area (BSA)<0,85cm 2 /m 2 ). QOL was assessed by telephone interview using Short Form 36-Item Health Survey (SF-36) along with functional NYHA status estimation. A total of 45 pts were included (23 female), and divided in PPM (n=26), and non-PPM group (n=19). Both groups were similar in pts age, LVEF, AVA/BSA prior surgery. After surgery, 57% of pts had PPM categorized as mild PPM. During follow-up of 2,5years, 3 pts had died and 10 were lost from following. There was no difference in NYHA status after surgery between groups (p=0,758). SF36 results showed no difference between groups. However, there was a significant improvement in Physical functioning (47,50% vs 75,47%,p=0,000) and Role limitation due to physical health (41,41% vs 81,25%, p=0,007) scores in the whole study population after AVR. Males had significantly better Energy/fatigue (p=0,034), Social functioning (p=0,004) and Pain (p=0,017) scores. Mild to moderate PPM showed no clinical relevance. All patients revealed improvement in QOL after AVR, while male sex was related to better functioning scores irrespectively of PPM. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  2. Office-based narrow band imaging-guided flexible laryngoscopy tissue sampling: A cost-effectiveness analysis evaluating its impact on Taiwanese health insurance program

    Directory of Open Access Journals (Sweden)

    Tuan-Jen Fang

    2015-07-01

    Conclusion: Office-based NBI flexible laryngoscopy tissue sampling is a cost-saving procedure for patients and the Taiwanese National Health Insurance program. It also saves the procedure time. However, the net financial loss for the institution and physician would limit its popularization unless reimbursement patterns are changed.

  3. Numerical Analysis of the Impact of Thermal Inertia from the Furniture / Indoor Content and Phase Change Materials on the Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Le Dréau, Jérôme

    investigating the influence of the different types of thermal inertia on buildings energy flexibility. Although the insulation level and thermal mass of a building envelope are the dominant parameters, it appears that indoor content cannot be neglected for lightweight structure building simulations. Finally...

  4. Optimization of preservation activities and preservation engineering (1)

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Mimaki, Hidehito; Oda, Mitsuyuki

    2004-01-01

    In order to deal with the optimization of preservation activities and 'preservation engineering' which makes it possible, the relation between general society and preservation, the content and the structure of preservation activities, and the viewpoint and the approach of the optimization of the preventive preservation are described. The optimization of the preventive preservation is shown respectively in the four stages of planning, implementation, result evaluation and countermeasure. (K. Kato)

  5. VT Historic Preservation Grant

    Data.gov (United States)

    Vermont Center for Geographic Information — The State-funded Historic Preservation Grant Program helps municipalities and non-profit organizations rehabilitate the historic buildings that are a vital part of...

  6. Preservation of Built Environments

    DEFF Research Database (Denmark)

    Pilegaard, Marie Kirstine

    When built environments and recently also cultural environments are to be preserved, the historic and architectural values are identified as the key motivations. In Denmark the SAVE system is used as a tool to identify architectural values, but in recent years it has been criticized for having...... architectural value in preservation work as a matter of maintaining the buildings -as keeping them "alive" and allowing this to continue in the future. The predominantly aesthetic preservation approach will stop the buildings' life process, which is the same as - "letting them die". Finnebyen in Aarhus...... is an example of a residential area, where the planning authority currently has presented a preservational district plan, following guidelines from the SAVE method. The purpose is to protect the area's architectural values in the future. The predominantly aesthetic approach is here used coupled to the concept...

  7. Radiation preservation of maize

    International Nuclear Information System (INIS)

    Wasito.

    1980-01-01

    Radiation preservation of maize was carried out. Radiation doses and sources, shielding materials, packaging materials, chemical radiation effects, biological radiation effects, were discussed. Experimental methods, samples and accessories were also presented. (SMN)

  8. Digital preservation for heritages

    CERN Document Server

    Lu, Dongming

    2011-01-01

    ""Digital Preservation for Heritages: Technologies and Applications"" provides a comprehensive and up-to-date coverage of digital technologies in the area of cultural heritage preservation, including digitalization, research aiding, conservation aiding, digital exhibition, and digital utilization. Processes, technical frameworks, key technologies, as well as typical systems and applications are discussed in the book. It is intended for researchers and students in the fields of computer science and technology, museology, and archaeology. Dr. Dongming Lu is a professor at College of Computer Sci

  9. Indiana Pavement Preservation Program

    OpenAIRE

    Ong, Ghim Ping (Raymond); Nantung, Tommy E.; Sinha, Kumares C.

    2010-01-01

    State highway agencies are facing immense pressure to maintain roads at acceptable levels amidst the challenging financial and economic situations. In recent years, pavement preservation has been sought as a potential alternative for managing the pavement assets, believing that it would provide a cost-effective solution in maintaining infrastructural conditions and meeting user expectations. This study explores the potential of pavement preservation concepts in managing the agency‘s pavement ...

  10. Flexible magnetoimpedance sensor

    KAUST Repository

    Li, Bodong; Kavaldzhiev, Mincho; Kosel, Jü rgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency

  11. Does a strong pycnocline impact organic-matter preservation and accumulation in an anoxic setting? The case of the Orca Basin, Gulf of Mexico

    Science.gov (United States)

    Tribovillard, Nicolas; Bout-Roumazeilles, Viviane; Sionneau, Thomas; Serrano, Jean Carlos Montero; Riboulleau, Armelle; Baudin, François

    2009-01-01

    The Orca Basin (an intraslope depression located in the Gulf of Mexico) collects sedimentary particles of terrestrial origin (clastic and organic particles mainly supplied by the Mississippi River) and of marine origin (biogenic productivity). The basin is partly filled with dense brines leached from salt diapirs cropping out on the sea floor, and is permanently stratified. A strong pycnocline induces anoxic bottom conditions, expectedly favorable to organic matter (OM) preservation. Here, we report on OM in the upper 750 cm below sea floor of Core MD02-2552 (Holocene). The organic content is dominated by marine-derived amorphous OM. The organic assemblage is unexpectedly degraded to some extent, which may be accounted for by a relatively long residence time of organic particles at the halocline-pycnocline at ˜2240 m. Thus the organic particles are temporarily trapped and kept in contact with the dissolved oxygen-rich overlying water mass. Lastly, the land-derived organic fraction shows co-variations with the land-derived clay mineral supply.

  12. Flexible Carpooling: Exploratory Study

    OpenAIRE

    Dorinson, Diana; Gay, Deanna; Minett, Paul; Shaheen, Susan

    2009-01-01

    Energy consumption could be reduced if more people shared rides rather than driving alone yet carpooling represents a small proportion of all potential carpoolers. Prior research has found that many who might carpool were concerned about reduced flexibility with carpooling. If flexibility is one of the barriers how could carpooling be organized to be more flexible? In Northern Virginia a flexible system has evolved where there are 3,500 single-use carpools per day. In another example there ...

  13. Fertility preservation during cancer treatment: clinical guidelines

    Science.gov (United States)

    Rodriguez-Wallberg, Kenny A; Oktay, Kutluk

    2014-01-01

    The majority of children, adolescents, and young adults diagnosed with cancer today will become long-term survivors. The threat to fertility that cancer treatments pose to young patients cannot be prevented in many cases, and thus research into methods for fertility preservation is developing, aiming at offering cancer patients the ability to have biologically related children in the future. This paper discusses the current status of fertility preservation methods when infertility risks are related to surgical oncologic treatments, radiation therapy, or chemotherapy. Several scientific groups and societies have developed consensus documents and guidelines for fertility preservation. Decisions about fertility and imminent potentially gonadotoxic therapies must be made rapidly. Timely and complete information on the impact of cancer treatment on fertility and fertility preservation options should be presented to all patients when a cancer treatment is planned. PMID:24623991

  14. Digitisation for access to preserved documents

    Directory of Open Access Journals (Sweden)

    Majlis Bremer-Laamanen

    2003-06-01

    Full Text Available Today the digitisation of our collections is a goal for libraries all over Europe. The choices we make in digitisation and preservation now will have a significant impact on the future. Do we only emphasise access? How do we enable access and preserve our originals in a qualitative and productive way? What will actually be left of our cultural heritage in the next millennium? In this paper I am going to look at promoting access to preserved originals mirrored by the experience at the Helsinki University Library, the National Library of Finland: · Preservation activities as platform for digitisation and OCR · Processing access to collections · The future - looking ahead

  15. Bending impact on the performance of a flexible Li4Ti5O12-based all-solid-state thin-film battery.

    Science.gov (United States)

    Sepúlveda, Alfonso; Speulmanns, Jan; Vereecken, Philippe M

    2018-01-01

    The growing demand of flexible electronic devices is increasing the requirements of their power sources. The effect of bending in thin-film batteries is still not well understood. Here, we successfully developed a high active area flexible all-solid-state battery as a model system that consists of thin-film layers of Li 4 Ti 5 O 12 , LiPON, and Lithium deposited on a novel flexible ceramic substrate. A systematic study on the bending state and performance of the battery is presented. The battery withstands bending radii of at least 14 mm achieving 70% of the theoretical capacity. Here, we reveal that convex bending has a positive effect on battery capacity showing an average increase of 5.5%, whereas concave bending decreases the capacity by 4% in contrast with recent studies. We show that the change in capacity upon bending may well be associated to the Li-ion diffusion kinetic change through the electrode when different external forces are applied. Finally, an encapsulation scheme is presented allowing sufficient bending of the device and operation for at least 500 cycles in air. The results are meant to improve the understanding of the phenomena present in thin-film batteries while undergoing bending rather than showing improvements in battery performance and lifetime.

  16. Training for Preservation Management

    Directory of Open Access Journals (Sweden)

    Mirjam M. Foot

    1999-05-01

    Full Text Available In August 1997 the first of a series of summer schools in Preservation Management was held at the Archivschule in Marburg (Germany. The school was organised by the ECPA, the LIBER Division on Preservation, ICA and the Archivschule itself and was aimed at archivists and librarians in management positions from European institutions. It dealt with managerial, organisational and financial aspects of preservation and required active participation by those attending. Apart from introductory sessions by the teaching staff at the Archivschule, a large part of the course took the form of working groups, discussions, assignments and role play, to which participants were expected to take their own experience and problems. The school was conducted in German. Topics, spread over five days, ranged from preservation in the context of the core activities of libraries and archives; planning of preservation projects; general management issues, such as resource management, budgeting, priority setting, communication and effecting change; to more detailed considerations of day-to-day issues, such as storage, disaster control, microfilming and digitising, mass conservation processes, and moulds and fungi.

  17. Convexity-preserving Bernstein–Bézier quartic scheme

    Directory of Open Access Journals (Sweden)

    Maria Hussain

    2014-07-01

    Full Text Available A C1 convex surface data interpolation scheme is presented to preserve the shape of scattered data arranged over a triangular grid. Bernstein–Bézier quartic function is used for interpolation. Lower bound of the boundary and inner Bézier ordinates is determined to guarantee convexity of surface. The developed scheme is flexible and involves more relaxed constraints.

  18. Woman-to-woman rape and sexual assault, and its impact upon the occupation of work: Victim/survivors' life roles of worker or student as disruptive and preservative.

    Science.gov (United States)

    Twinley, Rebecca

    2017-01-01

    Woman-to-woman rape and sexual assault globally remains largely unknown and unaddressed. Expectedly, victim/survivors often cope alone, or with limited support, in the traumatic aftermath of their sexual victimisation. Work is one occupation that is impacted upon at this time. The study explored the perceived impacts of woman-to-woman rape and sexual assault, the subsequent experience of disclosure, reaction, and support, and the consequences for victim/survivors' subjective experience of occupation. The study combined a sociological auto/biographical approach with an occupational science perspective. A web-based survey generated initial data, and was also used as a sampling tool; subsequently, 10 respondents were interviewed face-to-face, in various UK locations. An eleventh respondent shared her story through correspondence. Four key themes emerged: 1) Identity; 2) Emotion; 3) Survival; and 4) Occupation. The latter, occupation, incorporated study and work. For these victim/survivors, work or education can be experienced as either: disrupted (triggering) or as preservative (maintenance). Their life roles as worker or student were impacted by feelings that they could have performed better and achieved more. Occupational therapists and other relevant service providers could work with sexually victimised people in order to participate more satisfactorily and healthily in the occupation of work.

  19. Cancer and fertility preservation

    DEFF Research Database (Denmark)

    Lambertini, Matteo; Del Mastro, Lucia; Pescio, Maria C

    2016-01-01

    In the last years, thanks to the improvement in the prognosis of cancer patients, a growing attention has been given to the fertility issues. International guidelines on fertility preservation in cancer patients recommend that physicians discuss, as early as possible, with all patients...... of reproductive age their risk of infertility from the disease and/or treatment and their interest in having children after cancer, and help with informed fertility preservation decisions. As recommended by the American Society of Clinical Oncology and the European Society for Medical Oncology, sperm...... data have become available, and several issues in this field are still controversial and should be addressed by both patients and their treating physicians.In April 2015, physicians with expertise in the field of fertility preservation in cancer patients from several European countries were invited...

  20. Optimization of preservation activities and preservation engineering (2)

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Mimaki, Hidehito; Oda, Mitsuyuki

    2004-01-01

    In order to deal with the optimization of preservation activities and 'preservation engineering' which makes it possible, the viewpoint and the approach of the optimization of the ex post facto preservation and the content to be possessed in 'preservation engineering' are described. The optimization of the ex post facto preservation is shown respectively in the four stages of planning, implementation, result evaluation and countermeasure. (K. Kato)

  1. Flexible and tunable silicon photonic circuits on plastic substrates

    Science.gov (United States)

    Chen, Yu; Li, Huan; Li, Mo

    2012-09-01

    Flexible microelectronics has shown tremendous promise in a broad spectrum of applications, especially those that cannot be addressed by conventional microelectronics in rigid materials and constructions. These unconventional yet important applications range from flexible consumer electronics to conformal sensor arrays and biomedical devices. A recent paradigm shift in implementing flexible electronics is to physically transfer highly integrated devices made in high-quality, crystalline semiconductors on to plastic substrates. Here we demonstrate a flexible form of silicon photonics using the transfer-and-bond fabrication method. Photonic circuits including interferometers and resonators have been transferred onto flexible plastic substrates with preserved functionalities and performance. By mechanically deforming, the optical characteristics of the devices can be tuned reversibly over a remarkably large range. The demonstration of the new flexible photonic systems based on the silicon-on-plastic (SOP) platform could open the door to many future applications, including tunable photonics, optomechanical sensors and biomechanical and bio-photonic probes.

  2. Advanced Digital Preservation

    CERN Document Server

    Giaretta, David

    2011-01-01

    There is growing recognition of the need to address the fragility of digital information, on which our society heavily depends for smooth operation in all aspects of daily life. This has been discussed in many books and articles on digital preservation, so why is there a need for yet one more? Because, for the most part, those other publications focus on documents, images and webpages -- objects that are normally rendered to be simply displayed by software to a human viewer. Yet there are clearly many more types of digital objects that may need to be preserved, such as databases, scientific da

  3. Integral-preserving integrators

    International Nuclear Information System (INIS)

    McLaren, D I; Quispel, G R W

    2004-01-01

    Ordinary differential equations having a first integral may be solved numerically using one of several methods, with the integral preserved to machine accuracy. One such method is the discrete gradient method. It is shown here that the order of the method can be bootstrapped repeatedly to higher orders of accuracy. The method is illustrated using the Henon-Heiles system. (letter to the editor)

  4. Foodstuffs preservation by ionization

    International Nuclear Information System (INIS)

    1991-12-01

    This document contains all the papers presented at the meeting on foodstuffs preservation by ionization. These papers deal especially with the food ionization process, its development and the view of the food industry on ionization. Refs and figs (F.M.)

  5. Preserving food with radiation

    International Nuclear Information System (INIS)

    Thomas, A.C

    1978-01-01

    Food irradiation is becoming an increasingly more important method of food preservataion. The irradiation process and its advangages are briefly described, and its use in the preservation of poultry and various kinds of fruits is discussed. Fruit export is hampered by restrictions due to infestation. Radiation disinfestation will therefore be of great advantage and may lead to a growth in export markets

  6. Preserve America News

    Science.gov (United States)

    phone number. Whether or not you're able to let us know ahead of time, however, we hope you can join us Amache Preservation Society in Colorado and the Friends of Mount Hope Cemetery in New York. This brings Places: Breathing New Life into Our Communities." Read about this informative session. National

  7. POLARISATION PRESERVING OPTICAL FIBRE

    DEFF Research Database (Denmark)

    2000-01-01

    . This cladding structure provides polarisation preserving properties to the optical fibre. Optical fibres using this technology may have claddings with elements placed non-periodically as well as in a two-dimensional periodic lattice - such as cladding providing Photonic Band Gap (PBG) effects....

  8. Wood preservative testing

    Science.gov (United States)

    Rebecca Ibach; Stan T. Lebow

    2012-01-01

    Most wood species used in commercial and residential construction have little natural biological durability and will suffer from biodeterioration when exposed to moisture. Historically, this problem has been overcome by treating wood for outdoor use with toxic wood preservatives. As societal acceptance of chemical use changes, there is continual pressure to develop and...

  9. Preservation in New Buildings

    Directory of Open Access Journals (Sweden)

    Christopher Kitching

    2000-06-01

    Full Text Available In the United Kingdom (as in many other countries increasing attention is being paid to the importance of each library and archive having a written preservation strategy endorsed by its governing body. So increasingly we are asking: where does „preservation“ begin and what are its top priorities? Some would say preservation begins with the definition of collecting policies to ensure that only relevant items are acquired in the first place, and therefore that no unnecessary costs are incurred on the long-term care of unwanted and unconsulted items. Others might argue that the first priority must be the careful appraisal of existing holdings to determine their preservation and conservation requirements and to prioritise their treatment. Or should preservation begin with damage-limitation: restricting the physical handling of books and documents, on the one hand by providing whenever possible surrogate copies in digital formats or microform, and on the other hand by offering at least basic protection through appropriate boxing and packaging? This, surely, goes hand-in-hand with the education of staff and readers about the importance of treating rare or unique materials with proper respect.

  10. Preserving the Seminar Experience

    Science.gov (United States)

    Ramsey, David; Evans, Jocelyn; Levy, Meyer

    2016-01-01

    This article presents a new approach to online graduate education. With hopes of recruiting a larger cohort in order to preserve a graduate program struggling with low enrollment, we began offering a limited number of seats to students who would attend class in real time but from remote locations, using a videoconferencing platform. Unlike…

  11. ACHP | Advisory Council on Historic Preservation Publications

    Science.gov (United States)

    Integrating NEPA and Section 106 (2013) Measuring Economic Impacts of Historic Preservation (2013) Celebrating Enhancing Federal Management of Historic Properties (2004) Heritage Tourism and the Federal Government : Summit II—Report of Proceedings (2003) Heritage Tourism and the Federal Government: Summit I—Report of

  12. Radioisotopes and food preservation against insects

    International Nuclear Information System (INIS)

    Hachem Ahmad, M.S.

    1998-01-01

    The book describes how to preserve food from harmful insects by using radioisotopes. It focusses on the impact of ionized radiation on the different stages of insect growth and on its metabolism and immunity. It also discusses the relationship between radiation doses and insect reproduction. It explains the various methods to detect the irradiated foods

  13. DNA preservation in silk.

    Science.gov (United States)

    Liu, Yawen; Zheng, Zhaozhu; Gong, He; Liu, Meng; Guo, Shaozhe; Li, Gang; Wang, Xiaoqin; Kaplan, David L

    2017-06-27

    The structure of DNA is susceptible to alterations at high temperature and on changing pH, irradiation and exposure to DNase. Options to protect and preserve DNA during storage are important for applications in genetic diagnosis, identity authentication, drug development and bioresearch. In the present study, the stability of total DNA purified from human dermal fibroblast cells, as well as that of plasmid DNA, was studied in silk protein materials. The DNA/silk mixtures were stabilized on filter paper (silk/DNA + filter) or filter paper pre-coated with silk and treated with methanol (silk/DNA + PT-filter) as a route to practical utility. After air-drying and water extraction, 50-70% of the DNA and silk could be retrieved and showed a single band on electrophoretic gels. 6% silk/DNA + PT-filter samples provided improved stability in comparison with 3% silk/DNA + filter samples and DNA + filter samples for DNA preservation, with ∼40% of the band intensity remaining at 37 °C after 40 days and ∼10% after exposure to UV light for 10 hours. Quantitative analysis using the PicoGreen assay confirmed the results. The use of Tris/borate/EDTA (TBE) buffer enhanced the preservation and/or extraction of the DNA. The DNA extracted after storage maintained integrity and function based on serving as a functional template for PCR amplification of the gene for zinc finger protein 750 (ZNF750) and for transgene expression of red fluorescence protein (dsRed) in HEK293 cells. The high molecular weight and high content of a crystalline beta-sheet structure formed on the coated surfaces likely accounted for the preservation effects observed for the silk/DNA + PT-filter samples. Although similar preservation effects were also obtained for lyophilized silk/DNA samples, the rapid and simple processing available with the silk-DNA-filter membrane system makes it appealing for future applications.

  14. Preservation of ancient impact ages on the R chondrite parent body: 40Ar/39Ar age of hornblende-bearing R chondrite LAP 04840

    Science.gov (United States)

    Righter, Kevin; Cosca, Michael A.; Morgan, Leah

    2016-01-01

    The hornblende- and biotite-bearing R chondrite LAP 04840 is a rare kind of meteorite possibly containing outer solar system water stored during metamorphism or postshock annealing deep within an asteroid. Because little is known regarding its age and origin, we determined 40Ar/39Ar ages on hornblende-rich separates of the meteorite, and obtained plateau ages of 4340(±40) to 4380(±30) Ma. These well-defined plateau ages, coupled with evidence for postshock annealing, indicate this meteorite records an ancient shock event and subsequent annealing. The age of 4340–4380 Ma (or 4.34–4.38 Ga) for this and other previously dated R chondrites is much older than most impact events recorded by ordinary chondrites and points to an ancient event or events that predated the late heavy bombardment that is recorded in so many meteorites and lunar samples.

  15. Office flexible cystoscopy.

    Science.gov (United States)

    Kavoussi, L R; Clayman, R V

    1988-11-01

    Since the development of the first purpose-built flexible cystoscope in 1984, flexible cystoscopy has become an accepted diagnostic and therapeutic modality. Indeed, it is estimated that more than 10 per cent of practicing urologists are already familiar with this technology. The flexible cystoscope has markedly extended the urologist's ability to examine the bladder, and it has become a valuable adjunct to the rigid cystoscope. Although the operation of this instrument is vastly different from that of its rigid counterpart, with practice, the technique can be learned. After experience is obtained with diagnostic flexible cystoscopy, the urologist will likely prefer this new instrument for bladder inspection, as it provides for a more thorough yet less morbid and less expensive examination. In the future, the development of improved and smaller instrumentation will further extend the therapeutic indications for flexible cystoscopy. Indeed, advances in laser technology are already providing the urologist with 300- to 600-micron (0.9 to 1.8F) flexible probes capable of incision (KTP laser), fulguration (Nd:YAG laser), and stone disintegration (tunable dye laser). Lastly, the skills obtained in using the flexible cystoscope are all readily applicable to the development of dexterity with the already available flexible nephroscope and the more recently developed flexible ureteroscope.

  16. Preservation of forest wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.

    1999-01-01

    As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

  17. The impact of intramolecular π-coupling and steric flexibility on the ordering of organic films at solid/liquid-interfaces

    Science.gov (United States)

    Saracino, Martino; Breuer, Stephan; Barati, Gholamreza; Sak, Emilia; Hingerl, Kurt; Müller, Ute; Müller, Manfred; Höger, Sigurd; Wandelt, Klaus

    2013-01-01

    In the present work the effect of the intramolecular steric flexibility on the structural self-assembly of organic cations and their redox activity at a chloride precovered Cu(100) electrode is investigated. In particular the adsorption of 1,1‧-dibenzyl-4,4‧-(propane-1,3-diyl)dipyridinium (C3-DBDP) is studied by means of cyclic voltametry (CV), in situ scanning tunneling microscopy (EC-STM) and ex situ X-ray photoelectron spectroscopy (XPS) and the experimental results are compared to previously published findings on related bipyridinium (“viologen”) molecules. The CV measurements reveal a loss of the redox activity of the more flexible C3-DBDP2 + compared to dibenzylviologen (DBV2 +), as the first electron reduction step of C3-DBDP2 + does not appear within the potential window of the Cu(100), but is shifted below the hydrogen evolution regime. This reduced redox activity is the result of the lifting of the extended π-system of the bipyridinium core by introducing the propyl chain between the two pyridinium rings. In agreement with this result, XP spectra prove that the C3-DBDP2 + cations retain their initial dicationic charge within the entire potential window in solution but also upon adsorption on the Cl-c(2x2)/Cu(100) substrate, where they are found to form an inter-linked stripe phase. The building blocks of each stripe are attributed to one pyridinium-benzyl moiety, which represents half of one C3-DBDP2 + molecule. The resulting consecutive arrangement of half C3-DBDP2 + molecules along one stripe is stabilized by electrostatic attraction between the positively charged pyridinium rings and the negatively charged π-system of the benzyl rings.

  18. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Oztasiran, I.

    1984-01-01

    Irradiation is a physical process for treating food and as such it is comparable to other processing techniques such as heating or freezing foods for preservation. The energy level used in food irradiation is always below that producing radioactivity in the treated food, hence this aspect can be totally excluded in wholesomeness evaluations. Water is readily ionized and may be the primary source of ionization in foods with secondary effects on other molecules, possibly more a result of water ionization than of direct hits. In the presence of oxygen, highly reactive compounds may be produced, such as H, H 3 0+ and H 2 O 2 . Radiation at the energy flux levels used for food (<2 MeV) does not induce radioactivity. Food irradiation applications are already technically and economically feasible and that food so treated is suitable for consumption. Food irradiation techniques can play an important role for an improved preservation, storage and distribution of food products. (author)

  19. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Kooij, J. van

    1981-01-01

    Twenty-five years of development work on the preservation of food by irradiation have shown that this technology has the potential to reduce post-harvest losses and to produce safe foods. The technological feasibility has been established but general acceptance of food irradiation by national regulatory bodies and consumers requires attention. The positive aspects of food preservation by irradiation include: the food keeps its freshness and its physical state, agents which cause spoilage (bacteria, etc.) are eliminated, recontamination does not take place, provided packaging materials are impermeable to bacteria and insects. It inhibits sprouting of root crops, kills insects and parasites, inactivates bacteria, spores and moulds, delays ripening of fruit, improves the technological properties of food. It makes foods biologically safe, allows the production of shelf-stable foods and is excellent for quarantine treatment, and generally improves food hygiene. The dose ranges needed for effective treatment are given

  20. Flexibility in fuel manufacturing

    International Nuclear Information System (INIS)

    Reparaz, A.; Stavig, W.E.; McLees, R.B.

    1987-01-01

    From its inception Exxon Nuclear has produced both BWR and PWR fuels. This is reflected in a product line that, to date, includes over 20 fuel designs. These range from 6x6 design at one end of the spectrum to the recently introduced 17x17 design. The benefits offered include close tailoring of the fuel design to match the customer's requirements, and the ability to rapidly introduce product changes, such as the axial blanket design, with a minimal impact on manufacturing. This flexibility places a number of demands on the manufacturing organization. Close interfaces must be established, and maintained, between the marketing, product design, manufacturing, purchasing and quality organizations, and the information flows must be immediate and accurate. Production schedules must be well planned and must be maintained or revised to reflect changing circumstances. Finally, the manufacturing facilities must be designed to allow rapid switchover between product designs with minor tooling changes and/or rerouting of product flows to alternate work stations. Among the tools used to manage the flow of information and to maintain the tight integration necessary between the various manufacturing, engineering and quality organizations is a commercially available, computerized planning and tracking system, AMAPS. A real-time production data collection system has been designed which gathers data from each production work station for use by the shop floor control module of AMAPS. Accuracy of input to the system is improved through extensive use of bar codes to gather information on the product as it moves through and between work stations. This computerized preparation of material tracing has an impact on direct manufacturing records, quality control records, nuclear material records and accounting and inventory records. This is of benefit to both Exxon Nuclear and its customers

  1. How to preserve foods

    International Nuclear Information System (INIS)

    Balek, V.; Vadassova, J.

    1979-01-01

    The use of gamma and fast electron radiations for food preservation is described. Examples are given of the application of ionizing radiation for retarding potato germination, onion growth, and fruit ripening, for limiting the action of microorganisms, and removing salmonella from meat products. The method has remarkable prospects although it may not be considered to be a general-purpose method. Geographic and economic conditions should always be taken into consideration. (J.P.)

  2. Preservation and gamma irradiation

    International Nuclear Information System (INIS)

    Ramiere, R.

    1991-01-01

    The paper reviews briefly the application of gamma radiation to preservation of cultural objects for disinsectization, disinfection and strengthening of materials such as wood or stone by impregnation with a liquid resin and in situ polymerization. As heavy equipment is required two facilities are specialized a 1000 T Bq cobalt 60 source at Grenoble (France) and 100 T Bq one at Rostoky (Czechoslovakia). Examples of treated objects are given [fr

  3. Fertility preservation 2

    Science.gov (United States)

    De Vos, Michel; Smitz, Johan; Woodruff, Teresa K

    2014-01-01

    Enhanced long-term survival rates of young women with cancer and advances in reproductive medicine and cryobiology have culminated in an increased interest in fertility preservation methods in girls and young women with cancer. Present data suggest that young patients with cancer should be referred for fertility preservation counselling quickly to help with their coping process. Although the clinical application of novel developments, including oocyte vitrification and oocyte maturation in vitro, has resulted in reasonable success rates in assisted reproduction programmes, experience with these techniques in the setting of fertility preservation is in its infancy. It is hoped that these and other approaches, some of which are still regarded as experimental (eg, ovarian tissue cryopreservation, pharmacological protection against gonadotoxic agents, in-vitro follicle growth, and follicle transplantation) will be optimised and become established within the next decade. Unravelling the complex mechanisms of activation and suppression of follicle growth will not only expand the care of thousands of women diagnosed with cancer, but also inform the care of millions of women confronted with reduced reproductive fitness because of ageing. PMID:25283571

  4. Grain preservation in SSSR

    International Nuclear Information System (INIS)

    Trisviatski, L.A.

    1973-01-01

    First the importance of cereals collected in the S.S.S.R., the reason why the government had to put in practice a storage chain, composed of large capacity store houses (200 000 metric tonnes, or more) is reminded. When climatic conditions result in wet harvested grains, cereals are dried either in state enterprise dryers (32 to 50 tonnes/hour) or in kolkhozes' dryers (2 to 16 tonnes/hour). A new type of drying with recycling, has been developped, economizing 10 to 15 p. 100. Then the possibilities offered by the technique of partial drying of very wet grains are studied and the preservation processes using fresh ventilation, or hot ventilation with drying effect are described. The question of silage of wet grains destined to animal consumption is then examined as well as preservation by sodium pyrosulfide; the use of propionic acid, little developped in SSSR, is studied now, just as storage with inert gas. The struggle technics against insects, either with chemical agents, or with irradiation are described. Finally the modalities of technicians formation, specialized in preservation, are discussed [fr

  5. Flexible Scheduling May Have a Positive Impact on School Library Circulation. A Review of: Gavigan, K., Pribesh, S., & Dickinson, G. (2010. Fixed or flexible schedule? Schedule impacts and school library circulation. Library and Information Science Research, 32(2, 131-37.

    Directory of Open Access Journals (Sweden)

    Ann Medaille

    2011-03-01

    Full Text Available Objective – To determine whether a significant, positive relationship exists between flexible scheduling in elementary school library media centers and per-pupil circulation statistics.Design – Online survey.Setting – Library media centers in public elementary schools in two states of the United States.Subjects – A total of 88 elementary school library media specialists completed the survey.Methods – A 22-question online survey was created using Inquisite software. A link to the survey was sent via e-mail to a 600-person random sample of public school library media specialists whose names were drawn from the memberships of the North Carolina School Library Media Association and the Virginia Educational Media Association, with combined memberships totalling approximately 2,000. A random sample of 600 was chosen to provide a 95% confidence level with a confidence interval of plus or minus three points. The survey included questions about school schedules (flexible, partially flexible, or fixed, collection size, circulation statistics, total student enrolment, school type (elementary, middle, or high, school location (urban, rural, or suburban, percentage of students eligible for free and reduced price lunch, numbers of full-time professional library media specialists employed at the school, access procedures, and library closure information. The survey response rate was 29.3% (176 respondents. Because fixed versus flexible scheduling is an issue that primarily affects elementary schools, the authors further narrowed their subject pool to 88 elementary school respondents. Data were analyzed using SPSS 16.0 statistical software. Correlation analysis, including the analysis of covariance (ANCOVA, was used to compare differences in the three scheduling types and to control for other variables (such as location, socioeconomic status, collection size, staffing, days closed, and others that may affect circulation.Main Results – Of the 88

  6. Organizational flexibility estimation

    OpenAIRE

    Komarynets, Sofia

    2013-01-01

    By the help of parametric estimation the evaluation scale of organizational flexibility and its parameters was formed. Definite degrees of organizational flexibility and its parameters for the Lviv region enterprises were determined. Grouping of the enterprises under the existing scale was carried out. Special recommendations to correct the enterprises behaviour were given.

  7. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-05-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent. While maintaining large-scale production and prototyping rapidity, this flexible and translucent scheme demonstrates the potential to transform conventionally stiff electronic devices into thin and foldable ones without compromising long-term performance and reliability. In this work, we report on the fabrication and characterization of reversibly bistable flexible electronic switches that utilize flexible n-channel metal-oxide-semiconductor field-effect transistors. The transistors are fabricated initially on rigid (100) silicon substrates before they are peeled off. They can be used to control flexible batches of light-emitting diodes, demonstrating both the relative ease of scaling at minimum cost and maximum reliability and the feasibility of integration. The peeled-off silicon fabric is about 25 µm thick. The fabricated devices are transferred to a reversibly bistable flexible platform through which, for example, a flexible smartphone can be wrapped around a user’s wrist and can also be set back to its original mechanical position. Buckling and cyclic bending of such host platforms brings a completely new dimension to the development of flexible electronics, especially rollable displays.

  8. Flexible magnetoimpidence sensor

    KAUST Repository

    Kavaldzhiev, Mincho

    2015-05-01

    Recently, flexible electronic devices have attracted increasing interest, due to the opportunities they promise for new applications such as wearable devices, where the components are required to flex during normal use[1]. In this light, different magnetic sensors, like microcoil, spin valve, giant magnetoresistance (GMR), magnetoimpedance (MI), have been studied previously on flexible substrates.

  9. Flexibility within Fidelity

    Science.gov (United States)

    Kendall, Philip C.; Gosch, Elizabeth; Furr, Jami M.; Sood, Erica

    2008-01-01

    The authors address concerns regarding manual-based treatments, highlighting the role of flexibility and creativity. A cognitive-behavioral therapy for youth anxiety called the Coping Cat program demonstrates the flexible application of manuals and emphasizes the importance of a child-centered, personalized approach that involves the child in the…

  10. Flexible position probe assembly

    International Nuclear Information System (INIS)

    Schmitz, J.J.

    1977-01-01

    The combination of a plurality of tubular transducer sections and a flexible supporting member extending through the tubular transducer sections forms a flexible elongated probe of a design suitable for monitoring the level of an element, such as a nuclear magnetically permeable control rod or liquid. 3 claims, 23 figures

  11. Flexible Carbon Aerogels

    Directory of Open Access Journals (Sweden)

    Marina Schwan

    2016-09-01

    Full Text Available Carbon aerogels are highly porous materials with a large inner surface area. Due to their high electrical conductivity they are excellent electrode materials in supercapacitors. Their brittleness, however, imposes certain limitations in terms of applicability. In that context, novel carbon aerogels with varying degree of flexibility have been developed. These highly porous, light aerogels are characterized by a high surface area and possess pore structures in the micrometer range, allowing for a reversible deformation of the aerogel network. A high ratio of pore size to particle size was found to be crucial for high flexibility. For dynamic microstructural analysis, compression tests were performed in-situ within a scanning electron microscope allowing us to directly visualize the microstructural flexibility of an aerogel. The flexible carbon aerogels were found to withstand between 15% and 30% of uniaxial compression in a reversible fashion. These findings might stimulate further research and new application fields directed towards flexible supercapacitors and batteries.

  12. Global Sourcing Flexibility

    DEFF Research Database (Denmark)

    Ørberg Jensen, Peter D.; Petersen, Bent

    2013-01-01

    the higher costs (but decreased risk for value chain disruption) embedded in a more flexible global sourcing model that allows the firm to replicate and/or relocate activities across multiple locations. We develop a model and propositions on facilitating and constraining conditions of global sourcing...... sourcing flexibility. Here we draw on prior research in the fields of organizational flexibility, international business and global sourcing as well as case examples and secondary studies. In the second part of the paper, we discuss the implications of global sourcing flexibility for firm strategy...... and operations against the backdrop of the theory-based definition of the construct. We discuss in particular the importance of global sourcing flexibility for operational performance stability, and the trade-off between specialization benefits, emerging from location and service provider specialization, versus...

  13. Training development for pavement preservation.

    Science.gov (United States)

    2013-05-01

    This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement : preservation through training on proper selection, design, and application of pavement preservation treatments. In some ca...

  14. ACHP | Tribal Historic Preservation Officers

    Science.gov (United States)

    preservation of significant historic properties. Those functions include identifying and maintaining Working with Section 106 Federal, State, & Tribal Programs Training & Education Publications Search skip specific nav links Home arrow Historic Preservation Programs & Officers arrow THPOs

  15. Preservative treatments for building components

    Science.gov (United States)

    Stan Lebow

    2007-01-01

    The wood species most commonly used in construction have little natural durability Thus, they are treated with preservatives when used in conditions that favor biodeterioration. The type of preservative used varies with the type of wood product, exposure condition, and specific agent of deterioration. This paper discusses the characteristics of several preservative...

  16. Preservation Values for Visibility Protection at the National Parks (1990)

    Science.gov (United States)

    This report presents the design and results of a study concerning the estimation of preservation values held by the general public for the protection of visibility at national parks from air pollution impacts

  17. Preserving the Manhattan Project

    Science.gov (United States)

    Kelly, Cynthia

    2014-03-01

    When future generations look back on the 20th century, few events will rival the harnessing of nuclear energy as a turning point in world history, science and society. Yet, the Department of Energy has not always embraced its Manhattan Project origins. The presentation will focus on the progress made over the last 20 years to preserve the properties and first-hand accounts that for decades have been threatened with demolition and indifference. Since the mid-1950s, most remaining Manhattan Project properties at the Los Alamos National Laboratory had been abandoned. Among them was a cluster of wooden buildings called the ``V Site.'' This is where scientists assembled the ``Gadget,'' the world's first atomic device tested on July 16, 1945. Regardless of its significance, the ``V Site'' buildings like all the rest were slated for demolition. The Advisory Council on Historic Preservation (ACHP) toured the properties in November 1998. Most could not believe that the world's first atomic bomb was designed in such humble structures. The properties were declared to be ``monumental in their lack of monumentality.'' A Save America's Treasures grant for 700,000 was awarded to restore the properties. To raise the required matching funds, I left the Federal government and soon founded the Atomic Heritage Foundation. The presentation will trace the progress made over the last decade to generate interest and support nationwide to preserve the Manhattan Project heritage. Saving both the physical properties and first-hand accounts of the men and women have been a priority. Perhaps our most significant achievement may be legislation now under consideration by Congress to create a Manhattan Project National Historical Park. Seventy years later, the Manhattan Project is finally getting the recognition it deserves.

  18. Fertility Preservation in Girls

    Directory of Open Access Journals (Sweden)

    Jennia Michaeli

    2012-01-01

    Full Text Available Children that undergo treatment for cancer are at risk of suffering from subfertility or hormonal dysfunction due to the detrimental effects of radiotherapy and chemotherapeutic agents on the gonads. Cryopreservation of ovarian tissue prior to treatment offers the possibility of restoring gonadal function after resumption of therapy. Effective counseling and management of pediatric patients is crucial for preserving their future reproductive potential. The purpose of this article is to review recent literature and to revise recommendations we made in a 2007 article. Pediatric hemato-oncology, reproductive endocrinology, surgery, anesthesia and bioethics perspectives are discussed and integrated to propose guidelines for offering ovarian cryopreservation to premenarcheal girls with cancer.

  19. Radiation preservation of spices

    International Nuclear Information System (INIS)

    Badshah, A.; Tasnim, A.; Khan, M.; Sattar, A.; Khan, I.

    1989-01-01

    The use of gamma irradiation for preservation of red hot pepper has been explained in report, as it can kill the harmful organisms without altering the organolpetic properties. The sample were dried and reduced to pass through 20 mesh. The samples were irradiated at different dose levels of 0, 2.5, 5.0, 7.5 and 10.0 KGy and results have been shown after different time intervals. Radiation and packaging treatments resulted normaly no effect on the color of dry fruits. (A.B)

  20. Preserving Transactional Data

    OpenAIRE

    Sara Day Thomson

    2017-01-01

    This paper is an adaptation of a longer report commissioned by the UK Data Service. The longer report contributes to on-going support for the Big Data Network – a programme funded by the Economic and Social Research Council (ESRC). The longer report can be found at doi:10.7207/twr16-02. This paper discusses requirements for preserving transactional data and the accompanying challenges facing the companies and institutions who aim to re-use these data for analysis or research. It present...

  1. Mutual preservation of entanglement

    International Nuclear Information System (INIS)

    Veitia, Andrzej; Jing, Jun; Yu, Ting; Wong, Chee Wei

    2012-01-01

    We study a generalized double Jaynes–Cummings (JC) model where two entangled pairs of two-level atoms interact indirectly. We show that there exist initial states of the qubit system so that two entangled pairs are available at all times. In particular, the minimum entanglement in the pairs as a function of the initial state is studied. Finally, we extend our findings to a model consisting of multi-mode atom–cavity interactions. We use a non-Markovian quantum state diffusion (QSD) equation to obtain the steady-state density matrix for the qubits. We show that the multi-mode model also displays dynamical preservation of entanglement. -- Highlights: ► Entanglement dynamics is studied in a generalized double Jaynes–Cummings model. ► We show that for certain initial states, the atoms remain entangled at all times. ► We extend the results to the case of multi-mode atom–cavity interactions. ► The model suggest that indirect interaction may help to preserve entanglement.

  2. Sources of Operational Flexibility, Greening the Grid

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Jessica; Milligan, Michael; Cochran, Jaquelin

    2015-05-01

    Changes in electricity demand and generation must be constantly balanced to maintain power system stability and reliability. Operational flexibility refers to the ability of a power system to respond to these changes. Power systems are designed and operated to efficiently manage variability and uncertainty in electricity demand and resource availability. Variable renewable energy (VRE) increases this inherent variability and uncertainty, and thus increases the need for flexibility. Systems with significant variability and uncertainty require flexible generators that can rapidly change output, operate efficiently at lower outputs, and operate for short durations. This flexibility in turn can reduce the need to curtail (decrease the output of) solar and wind generation; improve investor confidence in VRE and revenue streams; decrease the risk of negative market pricing (which results when conventional generators cannot turn down to low outputs during times of high VRE output); and reduce environmental impacts by increasing system efficiency and maximizing the utilization of VRE.

  3. Flexible Word Classes

    DEFF Research Database (Denmark)

    • First major publication on the phenomenon • Offers cross-linguistic, descriptive, and diverse theoretical approaches • Includes analysis of data from different language families and from lesser studied languages This book is the first major cross-linguistic study of 'flexible words', i.e. words...... that cannot be classified in terms of the traditional lexical categories Verb, Noun, Adjective or Adverb. Flexible words can - without special morphosyntactic marking - serve in functions for which other languages must employ members of two or more of the four traditional, 'specialised' word classes. Thus......, flexible words are underspecified for communicative functions like 'predicating' (verbal function), 'referring' (nominal function) or 'modifying' (a function typically associated with adjectives and e.g. manner adverbs). Even though linguists have been aware of flexible world classes for more than...

  4. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-01-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent

  5. Flexibility in insulin prescription

    Directory of Open Access Journals (Sweden)

    Sanjay Kalra

    2016-01-01

    Full Text Available This communication explores the concept of flexibility, a propos insulin preparations and insulin regimes used in the management of type 2 diabetes. The flexibility of an insulin regime or preparation is defined as their ability to be injected at variable times, with variable injection-meal time gaps, in a dose frequency and quantum determined by shared decision making, with a minimal requirement of glucose monitoring and health professional consultation, with no compromise on safety, efficiency and tolerability. The relative flexibility of various basal, prandial and dual action insulins, as well as intensive regimes, is compared. The biopsychosocial model of health is used to assess the utility of different insulins while encouraging a philosophy of flexible insulin usage.

  6. Flexible displays, rigid designs?

    DEFF Research Database (Denmark)

    Hornbæk, Kasper

    2015-01-01

    Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs.......Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs....

  7. High performance flexible electronics for biomedical devices.

    Science.gov (United States)

    Salvatore, Giovanni A; Munzenrieder, Niko; Zysset, Christoph; Kinkeldei, Thomas; Petti, Luisa; Troster, Gerhard

    2014-01-01

    Plastic electronics is soft, deformable and lightweight and it is suitable for the realization of devices which can form an intimate interface with the body, be implanted or integrated into textile for wearable and biomedical applications. Here, we present flexible electronics based on amorphous oxide semiconductors (a-IGZO) whose performance can achieve MHz frequency even when bent around hair. We developed an assembly technique to integrate complex electronic functionalities into textile while preserving the softness of the garment. All this and further developments can open up new opportunities in health monitoring, biotechnology and telemedicine.

  8. Preserving reptiles for research

    Science.gov (United States)

    Gotte, Steve W.; Jacobs, Jeremy F.; Zug, George R.; Dodd, C. Kenneth

    2016-01-01

    What are voucher specimens and why do we collect them? Voucher specimens are animals and/or their parts that are deposited in a research museum to document the occurrence of a taxon at a specific location in space and time (Pleijel et al., 2008; Reynolds and McDiarmid, 2012). For field biologists, vouchers are the repeatable element of a field study as they allow other biologists, now and in the future, to confirm the identity of species that were studied. The scientific importance of a voucher specimen or series of specimens is that other people are afforded the opportunity to examine the entire animal and confirm or correct identifications. A photographic record is somewhat useful for recording the occurrence of a species, but such records can be insufficient for reliable confirmation of specific identity. Even if a photo shows diagnostic characters of currently recognized taxa, it may not show characters that separate taxa that may be described in the future. Substantial cryptic biodiversity is being found in even relatively well-known herpetofaunas (Crawford et al., 2010), and specimens allow researchers to retroactively evaluate the true diversity in a study as understanding of taxonomy evolves. They enable biologists to study the systematic relationships of populations by quantifying variation in different traits. Specimens are also a source of biological data such as behaviour, ecology, epidemiology, and reproduction through examination of their anatomy, reproductive and digestive tracts, and parasites (Suarez and Tsutsui, 2004). Preserving reptiles as vouchers is not difficult, although doing it properly requires care, effort, and time. Poorly preserved vouchers can invalidate the results and conclusions of your study because of the inability to confirm the identity of your study animals. Good science requires repeatability of observations, and the absence of vouchers or poorly preserved ones prevents such confirmation. Due to space restrictions, we are

  9. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Gottschalk, M.

    1978-01-01

    In November, 1977, an International Symposium on Food Preservation by Irradiation was held at Wageningen, the Netherlands. About 200 participants attended the Symposium which was organised by the International Atomic Energy Agency, the Food and Agriculture Organization of the United Nations and the World Health Organization; a reflection of the active interest which is being shown in food irradiation processing, particularly among developing countries. The 75 papers presented provided an excellent review of the current status of food irradiation on a wide range of different topics, and the Symposium also afforded the valuable opportunity for informal discussion among the participants and for developing personal contacts. A brief survey of the salient aspects discussed during the course of the meeting are reported on. (orig.) [de

  10. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Provider Pocket Guides Provider Guides Fertility Preservation for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed ... Patient Pocket Guides Patient Guides Fertility Preservation for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed ...

  11. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed with Cancer Fertility Preservation for Children Diagnosed ... for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed with Cancer Fertility Preservation for Children Diagnosed ...

  12. Flexible resources for quantum metrology

    Science.gov (United States)

    Friis, Nicolai; Orsucci, Davide; Skotiniotis, Michalis; Sekatski, Pavel; Dunjko, Vedran; Briegel, Hans J.; Dür, Wolfgang

    2017-06-01

    Quantum metrology offers a quadratic advantage over classical approaches to parameter estimation problems by utilising entanglement and nonclassicality. However, the hurdle of actually implementing the necessary quantum probe states and measurements, which vary drastically for different metrological scenarios, is usually not taken into account. We show that for a wide range of tasks in metrology, 2D cluster states (a particular family of states useful for measurement-based quantum computation) can serve as flexible resources that allow one to efficiently prepare any required state for sensing, and perform appropriate (entangled) measurements using only single qubit operations. Crucially, the overhead in the number of qubits is less than quadratic, thus preserving the quantum scaling advantage. This is ensured by using a compression to a logarithmically sized space that contains all relevant information for sensing. We specifically demonstrate how our method can be used to obtain optimal scaling for phase and frequency estimation in local estimation problems, as well as for the Bayesian equivalents with Gaussian priors of varying widths. Furthermore, we show that in the paradigmatic case of local phase estimation 1D cluster states are sufficient for optimal state preparation and measurement.

  13. Flexible resources for quantum metrology

    International Nuclear Information System (INIS)

    Friis, Nicolai; Orsucci, Davide; Skotiniotis, Michalis; Sekatski, Pavel; Dunjko, Vedran; Briegel, Hans J; Dür, Wolfgang

    2017-01-01

    Quantum metrology offers a quadratic advantage over classical approaches to parameter estimation problems by utilising entanglement and nonclassicality. However, the hurdle of actually implementing the necessary quantum probe states and measurements, which vary drastically for different metrological scenarios, is usually not taken into account. We show that for a wide range of tasks in metrology, 2D cluster states (a particular family of states useful for measurement-based quantum computation) can serve as flexible resources that allow one to efficiently prepare any required state for sensing, and perform appropriate (entangled) measurements using only single qubit operations. Crucially, the overhead in the number of qubits is less than quadratic, thus preserving the quantum scaling advantage. This is ensured by using a compression to a logarithmically sized space that contains all relevant information for sensing. We specifically demonstrate how our method can be used to obtain optimal scaling for phase and frequency estimation in local estimation problems, as well as for the Bayesian equivalents with Gaussian priors of varying widths. Furthermore, we show that in the paradigmatic case of local phase estimation 1D cluster states are sufficient for optimal state preparation and measurement. (paper)

  14. Flexible transparent electrode

    Science.gov (United States)

    Demiryont, Hulya; Shannon, Kenneth C., III; Moorehead, David; Bratcher, Matthew

    2011-06-01

    This paper presents the properties of the EclipseTECTM transparent conductor. EclipseTECTM is a room temperature deposited nanostructured thin film coating system comprised of metal-oxide semiconductor elements. The system possesses metal-like conductivity and glass-like transparency in the visible region. These highly conductive TEC films exhibit high shielding efficiency (35dB at 1 to 100GHz). EclipseTECTM can be deposited on rigid or flexible substrates. For example, EclipseTECTM deposited on polyethylene terephthalate (PET) is extremely flexible that can be rolled around a 9mm diameter cylinder with little or no reduction in electrical conductivity and that can assume pre-extension states after an applied stress is relieved. The TEC is colorless and has been tailored to have high visible transmittance which matches the eye sensitivity curve and allows the viewing of true background colors through the coating. EclipseTECTM is flexible, durable and can be tailored at the interface for applications such as electron- or hole-injecting OLED electrodes as well as electrodes in flexible displays. Tunable work function and optical design flexibility also make EclipseTECTM well-suited as a candidate for grid electrode replacement in next-generation photovoltaic cells.

  15. Flexible magnetoimpedance sensor

    International Nuclear Information System (INIS)

    Li, Bodong; Kavaldzhiev, Mincho N.; Kosel, Jürgen

    2015-01-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors's magnetic field and frequency responses and their dependence on the sensors's deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor's large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications. - Highlights: • A flexible magnetoimpedance (MI) sensor is developed. • Studies are carried out using a flexible microstrip transmission line. • An MI ratio of up to 90% is obtained. • The effect of magnetostriction is studied

  16. Flexible Foam Model.

    Energy Technology Data Exchange (ETDEWEB)

    Neilsen, Michael K.; Lu, Wei-Yang; Werner, Brian T.; Scherzinger, William M.; Lo, Chi S.

    2018-03-01

    Experiments were performed to characterize the mechanical response of a 15 pcf flexible polyurethane foam to large deformation at different strain rates and temperatures. Results from these experiments indicated that at room temperature, flexible polyurethane foams exhibit significant nonlinear elastic deformation and nearly return to their original undeformed shape when unloaded. However, when these foams are cooled to temperatures below their glass transition temperature of approximately -35 o C, they behave like rigid polyurethane foams and exhibit significant permanent deformation when compressed. Thus, a new model which captures this dramatic change in behavior with temperature was developed and implemented into SIERRA with the name Flex_Foam to describe the mechanical response of both flexible and rigid foams to large deformation at a variety of temperatures and strain rates. This report includes a description of recent experiments. Next, development of the Flex Foam model for flexible polyurethane and other flexible foams is described. Selection of material parameters are discussed and finite element simulations with the new Flex Foam model are compared with experimental results to show behavior that can be captured with this new model.

  17. Preserving Employee Privacy in Wellness.

    Science.gov (United States)

    Terry, Paul E

    2017-07-01

    The proposed "Preserving Employee Wellness Programs Act" states that the collection of information about the manifested disease or disorder of a family member shall not be considered an unlawful acquisition of genetic information. The bill recognizes employee privacy protections that are already in place and includes specific language relating to nondiscrimination based on illness. Why did legislation expressly intending to "preserve wellness programs" generate such antipathy about wellness among journalists? This article argues that those who are committed to preserving employee wellness must be equally committed to preserving employee privacy. Related to this, we should better parse between discussions and rules about commonplace health screenings versus much less common genetic testing.

  18. Natural flexible dermal armor.

    Science.gov (United States)

    Yang, Wen; Chen, Irene H; Gludovatz, Bernd; Zimmermann, Elizabeth A; Ritchie, Robert O; Meyers, Marc A

    2013-01-04

    Fish, reptiles, and mammals can possess flexible dermal armor for protection. Here we seek to find the means by which Nature derives its protection by examining the scales from several fish (Atractosteus spatula, Arapaima gigas, Polypterus senegalus, Morone saxatilis, Cyprinius carpio), and osteoderms from armadillos, alligators, and leatherback turtles. Dermal armor has clearly been developed by convergent evolution in these different species. In general, it has a hierarchical structure with collagen fibers joining more rigid units (scales or osteoderms), thereby increasing flexibility without significantly sacrificing strength, in contrast to rigid monolithic mineral composites. These dermal structures are also multifunctional, with hydrodynamic drag (in fish), coloration for camouflage or intraspecies recognition, temperature and fluid regulation being other important functions. The understanding of such flexible dermal armor is important as it may provide a basis for new synthetic, yet bioinspired, armor materials. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Flexible magnetoimpedance sensor

    KAUST Repository

    Li, Bodong

    2015-03-01

    Flexible magnetoimpedance (MI) sensors fabricated using a NiFe/Cu/NiFe tri-layer on Kapton substrate have been studied. A customized flexible microstrip transmission line was employed to investigate the MI sensors\\'s magnetic field and frequency responses and their dependence on the sensors\\'s deflection. For the first time, the impedance characteristic is obtained through reflection coefficient analysis over a wide range of frequencies from 0.1 MHz to 3 GHz and for deflections ranging from zero curvature to a radius of 7.2 cm. The sensor element maintains a high MI ratio of up to 90% and magnetic sensitivity of up to 9.2%/Oe over different bending curvatures. The relationship between the curvature and material composition is discussed based on the magnetostriction effect and stress simulations. The sensor\\'s large frequency range, simple fabrication process and high sensitivity provide a great potential for flexible electronics and wireless applications.

  20. Rapid Slewing of Flexible Space Structures

    Science.gov (United States)

    2015-09-01

    maneuvers while minimizing the impact of flexible motion. An antenna must point at its targets with a certain degree of accuracy to ensure link...of mass 1 due to force 1 is greatly impacted by mode 1, especially in the low frequency range. This is because the magnitudes of mode 2 and mode 3...mass 1). See responses for H12 and H13 in Figure 14. Figure 14. Impulse responses, h jk t( ) , for system in Figure 10. 53 The residue

  1. Persufflation (gaseous oxygen perfusion) as a method of heart preservation.

    Science.gov (United States)

    Suszynski, Thomas M; Rizzari, Michael D; Scott, William E; Eckman, Peter M; Fonger, James D; John, Ranjit; Chronos, Nicolas; Tempelman, Linda A; Sutherland, David E R; Papas, Klearchos K

    2013-04-22

    Persufflation (PSF; gaseous oxygen perfusion) is an organ preservation technique with a potential for use in donor heart preservation. Improved heart preservation with PSF may improve outcomes by maintaining cardiac tissue quality in the setting of longer cold ischemia times and possibly increasing the number of donor hearts available for allotransplant. Published data suggests that PSF is able to extend the cold storage times for porcine hearts up to 14 hours without compromising viability and function, and has been shown to resuscitate porcine hearts following donation after cardiac death. This review summarizes key published work on heart PSF, including prospective implications and future directions for PSF in heart transplantation. We emphasize the potential impact of extending preservation times and expanding donor selection criteria in heart allotransplant. Additionally, the key issues that need to be addressed before PSF were to become a widely utilized preservation strategy prior to clinical heart transplantation are summarized and discussed.

  2. Software industrial flexible

    OpenAIRE

    Díaz Araya, Daniel; Muñoz, Leandro; Sirerol, Daniel; Oviedo, Sandra; Ibáñez, Francisco S.

    2012-01-01

    En este trabajo se pretende investigar y proponer técnicas, métodos y tecnologías que permitan el desarrollo de software flexible en ambientes industriales. El objetivo es generar métodos y técnicas para facilitar el desarrollo de software flexible en ambientes industriales. Las áreas de investigación son los sistemas de scheduling de producción, la generación de software para plataformas de hardware abiertas y la innovación.

  3. Production Flexibility and Hedging

    Directory of Open Access Journals (Sweden)

    Georges Dionne

    2015-12-01

    Full Text Available We extend the analysis on hedging with price and output uncertainty by endogenizing the output decision. Specifically, we consider the joint determination of output and hedging in the case of flexibility in production. We show that the risk-averse firm always maintains a short position in the futures market when the futures price is actuarially fair. Moreover, in the context of an example, we show that the presence of production flexibility reduces the incentive to hedge for all risk averse agents.

  4. The flexibility of flexicurity

    DEFF Research Database (Denmark)

    Jensen, Carsten Strøby

    2011-01-01

    by a special relation between flexibility, social security and active labour market policy, where a high level of social security is seen as a precondition for a labour market characterized by flexibility. In this article it is argued that the Danish labour market is characterized by having not just one model...... of flexicurity, but two. These two models cover different parts of the labour market and different segments of employees. The first model (the blue-collar flexicurity model) – the one that is often focused on in the literature – covers primarily skilled and unskilled workers on the labour market. The second...

  5. Nuclear knowledge preservation

    International Nuclear Information System (INIS)

    Bettencourt, Marcia Pires da Luz

    2009-01-01

    The nuclear technology has encouraged the world development and brought a number of benefits to society. These benefits occurred in important social sectors such as Agriculture, Industry, Health Sciences, Environmental Sciences and the production of energy. The research in the nuclear area is justified, accordingly, as an important factor for science development, technology and innovation. Despite the importance of nuclear energy, there is a collapse in the generation, transmission and sharing of nuclear knowledge. The threat of regression in this area is evidenced by the difficulty of generating new knowledge and practices regarding the maintenance of some critical areas. This project focuses its attention on studying, specifically, the lack of young engineers and technical professionals to replace the older, considered this, an alarming situation. Therefore, it is necessary to identify and record the key skills of experienced workers, through a set of tools to elicitation (capture) this knowledge, as expertise is mainly with people, and is lost when they leave the organization. Against, the Knowledge Management provides methodologies for the process of stimulating the creation, collection and knowledge dissemination process, in order to achieve strategic objectives. This study aims to contribute to the building of a model for the Brazilian nuclear knowledge preservation and, therefore, contributes to the maintenance and innovation of activities in this area. (author)

  6. Quality Evaluation in Flexible Manufacturing Systems: A Markovian Approach

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2007-01-01

    to illustrate the applicability of the method. The results of this study suggest a possible approach to investigate the impact of flexibility on product quality and, finally, with extensions and enrichment of the model, may lead to provide production engineers and managers a better understanding of the quality implications and to summarize some general guidelines of operation management in flexible manufacturing systems.

  7. User Experience and Heritage Preservation

    Science.gov (United States)

    Orfield, Steven J.; Chapman, J. Wesley; Davis, Nathan

    2011-01-01

    In considering the heritage preservation of higher education campus buildings, much of the attention gravitates toward issues of selection, cost, accuracy, and value, but the model for most preservation projects does not have a clear method of achieving the best solutions for meeting these targets. Instead, it simply relies on the design team and…

  8. Contact dermatitis caused by preservatives.

    Science.gov (United States)

    Yim, Elizabeth; Baquerizo Nole, Katherine L; Tosti, Antonella

    2014-01-01

    Preservatives are biocidal chemicals added to food, cosmetics, and industrial products to prevent the growth of microorganisms. They are usually nontoxic and inexpensive and have a long shelf life. Unfortunately, they commonly cause contact dermatitis. This article reviews the most important classes of preservatives physicians are most likely to encounter in their daily practice, specifically isothiazolinones, formaldehyde and formaldehyde-releasers, iodopropynyl butylcarbamate, methyldibromoglutaronitrile, and parabens. For each preservative mentioned, the prevalence of sensitization, clinical presentation of contact dermatitis, patch testing concentrations, cross reactions, and related legislation will be discussed. Mandatory labeling of preservatives is required in some countries, but not required in others. Until policies are made, physicians and patients must be proactive in identifying potential sensitizers and removing their use. We hope that this article will serve as a guide for policy makers in creating legislation and future regulations on the use and concentration of certain preservatives in cosmetics and industrial products.

  9. Flexibility as a service

    NARCIS (Netherlands)

    Aalst, van der W.M.P.; Adams, M.; Hofstede, ter A.H.M.; Pesic, M.; Schonenberg, H.; Chen, L.; Liu, C.; Liu, Q.; Deng, K.

    2009-01-01

    The lack of flexibility is often seen as an inhibitor for the successful application of workflow technology. Many researchers have proposed different ways of addressing this problem and some of these ideas have been implemented in commercial systems. However, a "one size fits all" approach is likely

  10. Valuing Flexibility. Phase 2

    Science.gov (United States)

    2012-10-29

    Quarterly (2): 38-49. Cormier, P., Olewnik, A., and Lewis, K. 2008. An Approach to Quantifying Design Flexibility for Mass Customization in Early...C. Clarkson, P., and Zanker, W. 2004. Change and customisation in complex engineering domains, Res Eng Des 15(1), 1–21. Ekstrom, M. and Bjornsson, H

  11. Flexible Query Answering Systems

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 12th International Conference on Flexible Query Answering Systems, FQAS 2017, held in London, UK, in June 2017. The 21 full papers presented in this book together with 4 short papers were carefully reviewed and selected from 43 submissions...

  12. Flexible metal bellows

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    A set of flexible metal bellows being fatigue-tested by repeated offset motion. Such bellows assemblies were used in the SPS vacuum system at places where , for instance, beam stoppers and collimators had to be moved frequently in and out of the beam path.

  13. Flexible energy systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper discusses and analyses diffent national strategies and points out key changes in the energy system in order to achieve a system which can benefit from a high percentage of wind and CHP without having surplus production problems, introduced here as a flexible energy system....

  14. A flexible WLAN receiver

    NARCIS (Netherlands)

    Schiphorst, Roelof; Hoeksema, F.W.; Slump, Cornelis H.

    2003-01-01

    Flexible radio receivers are also called Software Defined Radios (SDRs) [1], [2]. The focus of our SDR project [3] is on designing the front end, from antenna to demodulation in bits, of a °exible, multi-standard WLAN receiver. We try to combine an instance of a (G)FSK receiver (Bluetooth) with an

  15. Preserve specimens for reproducibility

    Czech Academy of Sciences Publication Activity Database

    Krell, F.-T.; Klimeš, Petr; Rocha, L. A.; Fikáček, M.; Miller, S. E.

    2016-01-01

    Roč. 539, č. 7628 (2016), s. 168 ISSN 0028-0836 Institutional support: RVO:60077344 Keywords : reproducibility * specimen * biodiversity Subject RIV: EH - Ecology, Behaviour Impact factor: 40.137, year: 2016 http://www.nature.com/nature/journal/v539/n7628/full/539168b.html

  16. [Strategy for minimally invasive cochlear implantation and residual hearing preservation].

    Science.gov (United States)

    Huang, Y Y; Chen, J Y; Shen, M; Yang, J

    2018-01-07

    In the past few decades, considerable development was achieved in the cochlear implantation following the emergence of innovative electrode array and advances in minimally invasive surgery. Minimally invasive technique led to a better preservation of residual low-frequency hearing. The loss of residual hearing was caused by complicated factors. According to previous studies, a slower and stable speed of electrode insertion and the use of perioperative steroids were demonstrated to have a positive impact on hearing preservation. The selection of electrode array or its insertion approaches didn't show any distinctive benefits in hearing preservation.

  17. Superhydrophobicity enhancement through substrate flexibility

    Science.gov (United States)

    Vasileiou, Thomas; Gerber, Julia; Prautzsch, Jana; Schutzius, Thomas; Poulikakos, Dimos

    2017-11-01

    Inspired by manifestations in nature, micro/nanoengineering superhydrophobic surfaces has been the focus of much work. Generally, hydrophobicity is increased through the combined effects of surface texturing and chemistry; being durable, rigid substrate materials are the norm. However, many natural and technical materials are flexible, and the resulting effect on hydrophobicity has been largely unexplored. Here, we show that the rational tuning of flexibility can work collaboratively with the surface micro/nanotexture to enhance liquid repellency performance, defined by impalement and breakup resistance, contact time reduction, and restitution coefficient increase. Reduction in substrate stiffness and areal density imparts immediate acceleration and intrinsic responsiveness to impacting droplets, mitigating the collision and lowering the impalement probability by 60 % without the need for active actuation. We demonstrate the above discoveries with materials ranging from thin steel or polymer sheets to butterfly wings. Partial support of the Swiss National Science Foundation under Grant 162565 and the European Research Council under Advanced Grant 669908 (INTICE) is acknowledged.

  18. Privacy preserving data publishing with multiple sensitive attributes

    OpenAIRE

    Abdalaal, Ahmed Fuad

    2012-01-01

    Data mining is the process of extracting hidden predictive information from large databases, it has a great potential to help governments, researchers and companies focus on the most significant information in their data warehouses. High quality data and effective data publishing are needed to gain a high impact from data mining process. However there is a clear need to preserve individual privacy in the released data. Privacy-preserving data publishing is a research topic of eliminating priv...

  19. Energy Flexibility in Retail Buildings

    DEFF Research Database (Denmark)

    Ma, Zheng; Billanes, Joy Dalmacio; Kjærgaard, Mikkel Baun

    2017-01-01

    Retail buildings has an important role for demand side energy flexibility because of their high energy consumption, variety of energy flexibility resources, and centralized control via building control systems. Energy flexibility requires agreements and collaborations among different actors......), with the discussion of the stakeholders’ roles and their interrelation in delivering energy flexibility with the influential factors to the actual implementation of energy flexible operation of their buildings. Based on a literature analysis, the results cover stakeholders’ types and roles, perceptions (drivers......, barriers, and benefits), energy management activities and technology adoptions, and the stakeholders’ interaction for the energy flexibility in retail buildings....

  20. Food preservation by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1978-02-15

    As shortages of food and energy still continue to constitute the major threats to the well-being of the human race, all actions aiming at overcoming these problems must be assigned vital importance. Of the two complementary ways of solving the food problem (i.e., increasing the production of food and decreasing the spoilage of food) a novel method designed to contribute to the latter purpose has been discussed at this symposium hosted by The Netherlands and held under the aegis of the Food and Agriculture Organization of the United Nations, the International Atomic Energy Agency and the World Health Organization. Progress made since the last symposium of this kind (Bombay, India, 1972) was reviewed from the technological, economic and wholesomeness points of view by participants from 39 countries (60% of the latter were of the developing world). From the reports presented on the use of radiations to control physiological changes in plants, feasibility of radiation preservation of potatoes, onions, garlic, as well as of some tropical and subtropical fruits (mangoes, papayas, litchis and avocado) was confirmed. For potatoes, onions and mangoes, optimal conditions of treatment and storage were established on a larger scale, combined with sizeable consumer trials. Combinations of ionizing radiation with chemicals (salycilic acid, for potatoes), and physical agents (ultraviolet rays, for papayas) have been reported to be successful against the incidence of rot. A considerable number of papers dealt with the control of microbiological spoilage of foods. Work since 1972 has shown that radurization of fruits and vegetables (bananas, mangoes, dried dates, endive, chickory, onions, soup-greens), meat, poultry, marine products (mackerel, cod and plaice fillets, shrimps), decontamination of food ingredients and food technology aids (enzyme preparations, proteins, starch, spices), radappertization of meat and animal feedstuffs as well as combination treatments with salt, heat

  1. Food preservation by irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    As shortages of food and energy still continue to constitute the major threats to the well-being of the human race, all actions aiming at overcoming these problems must be assigned vital importance. Of the two complementary ways of solving the food problem (i.e., increasing the production of food and decreasing the spoilage of food) a novel method designed to contribute to the latter purpose has been discussed at this symposium hosted by The Netherlands and held under the aegis of the Food and Agriculture Organization of the United Nations, the International Atomic Energy Agency and the World Health Organization. Progress made since the last symposium of this kind (Bombay, India, 1972) was reviewed from the technological, economic and wholesomeness points of view by participants from 39 countries (60% of the latter were of the developing world). From the reports presented on the use of radiations to control physiological changes in plants, feasibility of radiation preservation of potatoes, onions, garlic, as well as of some tropical and subtropical fruits (mangoes, papayas, litchis and avocado) was confirmed. For potatoes, onions and mangoes, optimal conditions of treatment and storage were established on a larger scale, combined with sizeable consumer trials. Combinations of ionizing radiation with chemicals (salycilic acid, for potatoes), and physical agents (ultraviolet rays, for papayas) have been reported to be successful against the incidence of rot. A considerable number of papers dealt with the control of microbiological spoilage of foods. Work since 1972 has shown that radurization of fruits and vegetables (bananas, mangoes, dried dates, endive, chickory, onions, soup-greens), meat, poultry, marine products (mackerel, cod and plaice fillets, shrimps), decontamination of food ingredients and food technology aids (enzyme preparations, proteins, starch, spices), radappertization of meat and animal feedstuffs as well as combination treatments with salt, heat

  2. Contamination versus preservation of cosmetics

    DEFF Research Database (Denmark)

    Lundov, Michael Dyrgaard; Moesby, Lise; Zachariae, Claus

    2009-01-01

    Cosmetics with high water content are at a risk of being contaminated by micro-organisms that can alter the composition of the product or pose a health risk to the consumer. Pathogenic micro-organisms such as Staphylococcus aureus and Pseudomonas aeruginosa are frequently found in contaminated...... cosmetics. In order to avoid contamination of cosmetics, the manufacturers add preservatives to their products. In the EU and the USA, cosmetics are under legislation and all preservatives must be safety evaluated by committees. There are several different preservatives available but the cosmetic market...

  3. Neuropsychological Impairment in Detoxified Alcohol-Dependent Subjects with Preserved Psychosocial Functioning

    Directory of Open Access Journals (Sweden)

    Catherine Martelli

    2017-09-01

    Full Text Available BackgroundChronic alcoholism and its related cognitive impairments are associated with increased social, relational, and professional deficits which have a variable overall impact on social integration. These impairments are known to have varying severities and have rarely been studied among healthy alcohol-dependent subjects with preserved psychosocial functioning. Thus, the objective of this study is to describe neuropsychological performance in this particular population.MethodTwenty-nine socially adjusted alcohol-dependent men, hospitalized for a first or second withdrawal and abstinent for 3 weeks minimum, were compared to 29 healthy non-alcoholic controls. All subjects underwent clinical and psychiatric examination, neuropsychological tests of memory (M, working memory (WM, and executive functions (EF. Comparisons were performed using Student’s t-tests or Mann–Whitney U tests.ResultsNo group differences were found on the Self-Reported Social Adjustment Scale (SAS-SR or in the Mini-Mental State Examination. Compared to controls, patients had greater episodic, spatial, and WM deficits as well as slightly altered executive functions. In contrast, their executive functions (spontaneous flexibility, criteria generation, rule maintenance, and inhibitory control were relatively preserved.ConclusionOur sample of socially and professionally integrated alcoholic patients shows fewer cognitive deficits than described in previous studies. Our results suggest that early on, alcohol-dependent subjects develop compensatory adaptation processes to preserve social function and adaptation. Minor cognitive impairments should be screened early in the disease to integrate cognitive interventions into the health-care plan to thus eventually prevent further socio-professional marginalization.

  4. Employee satisfaction and use of flexible working arrangements

    OpenAIRE

    Wheatley, D

    2017-01-01

    This paper considers the impact of flexible working arrangements (FWAs), using the British Household Panel Survey and Understanding Society, 2001-2010/11. Results of panel logit, ANCOVA and change-score analysis are indicative of positive impacts from use of a number of FWAs, including homeworking having positive effects for men and women on job and leisure satisfaction. However,\\ud findings reveal gaps in availability and use of FWAs, and highlight the gendered nature of flexible employment....

  5. Thin film transistors for flexible electronics: Contacts, dielectrics and semiconductors

    KAUST Repository

    Quevedo-López, Manuel Angel Quevedo

    2011-06-01

    The development of low temperature, thin film transistor processes that have enabled flexible displays also present opportunities for flexible electronics and flexible integrated systems. Of particular interest are possible applications in flexible sensor systems for unattended ground sensors, smart medical bandages, electronic ID tags for geo-location, conformal antennas, radiation detectors, etc. In this paper, we review the impact of gate dielectrics, contacts and semiconductor materials on thin film transistors for flexible electronics applications. We present our recent results to fully integrate hybrid complementary metal oxide semiconductors comprising inorganic and organic-based materials. In particular, we demonstrate novel gate dielectric stacks and semiconducting materials. The impact of source and drain contacts on device performance is also discussed. Copyright © 2011 American Scientific Publishers.

  6. Thin film transistors for flexible electronics: Contacts, dielectrics and semiconductors

    KAUST Repository

    Quevedo-Ló pez, Manuel Angel Quevedo; Wondmagegn, Wudyalew T.; Alshareef, Husam N.; Ramí rez-Bon, Rafael; Gnade, Bruce E.

    2011-01-01

    The development of low temperature, thin film transistor processes that have enabled flexible displays also present opportunities for flexible electronics and flexible integrated systems. Of particular interest are possible applications in flexible sensor systems for unattended ground sensors, smart medical bandages, electronic ID tags for geo-location, conformal antennas, radiation detectors, etc. In this paper, we review the impact of gate dielectrics, contacts and semiconductor materials on thin film transistors for flexible electronics applications. We present our recent results to fully integrate hybrid complementary metal oxide semiconductors comprising inorganic and organic-based materials. In particular, we demonstrate novel gate dielectric stacks and semiconducting materials. The impact of source and drain contacts on device performance is also discussed. Copyright © 2011 American Scientific Publishers.

  7. Diffusion in flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brogaard Kristensen, S.

    2000-06-01

    This report describes the work done on modelling and simulation of the complex diffusion of gas through the wall of a flexible pipe. The diffusion and thus the pressure in annulus depends strongly on the diffusion and solubility parameters of the gas-polymer system and on the degree of blocking of the outer surface of the inner liner due to pressure reinforcements. The report evaluates the basis modelling required to describe the complex geometries and flow patterns. Qualitatively results of temperature and concentration profiles are shown in the report. For the program to serve any modelling purpose in 'real life' the results need to be validated and possibly the model needs corrections. Hopefully, a full-scale test of a flexible pipe will provide the required temperatures and pressures in annulus to validate the models. (EHS)

  8. Flexible cryogenic conduit

    International Nuclear Information System (INIS)

    Brindza, P.D.; Wines, R.R.; Takacs, J.J.

    1999-01-01

    A flexible and relatively low cost cryogenic conduit is described. The flexible cryogenic conduit of the present invention comprises a first inner corrugated tube with single braided serving, a second outer corrugated tube with single braided serving concentric with the inner corrugated tube, and arranged outwardly about the periphery of the inner corrugated tube and between the inner and outer corrugated tubes: a superinsulation layer; a one half lap layer of polyester ribbon; a one half lap layer of copper ribbon; a spirally wound refrigeration tube; a second one half lap layer of copper ribbon; a second one half lap layer of polyester ribbon; a second superinsulation layer; a third one half lap layer of polyester ribbon; and a spirally wound stretchable and compressible filament

  9. Diffusion in flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brogaard Kristensen, S

    2000-06-01

    This report describes the work done on modelling and simulation of the complex diffusion of gas through the wall of a flexible pipe. The diffusion and thus the pressure in annulus depends strongly on the diffusion and solubility parameters of the gas-polymer system and on the degree of blocking of the outer surface of the inner liner due to pressure reinforcements. The report evaluates the basis modelling required to describe the complex geometries and flow patterns. Qualitatively results of temperature and concentration profiles are shown in the report. For the program to serve any modelling purpose in 'real life' the results need to be validated and possibly the model needs corrections. Hopefully, a full-scale test of a flexible pipe will provide the required temperatures and pressures in annulus to validate the models. (EHS)

  10. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  11. Flexible training under threat.

    Science.gov (United States)

    Houghton, Anita; Eaton, Jennifer

    2002-10-01

    As the number of women in medicine and the general demand for a better work-life balance rises, flexible training is an increasingly important mechanism for maintaining the medical workforce. The new pay deal, together with entrenched cultural attitudes, are potential threats. Ways forward include more substantive part-time posts, more part-time opportunities at consultant level, and using positive experiences as a way of tackling attitudes in the less accepting specialties.

  12. Flexible weapons architecture design

    OpenAIRE

    Pyant, William C.

    2015-01-01

    Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilia...

  13. Industrial Fuel Flexibility Workshop

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  14. Flexible Land Administration

    DEFF Research Database (Denmark)

    Enemark, Stig

    2014-01-01

    Security of tenure is widely considered to be the missing piece of the puzzle when it comes to eradication of poverty. And, as explained in the previous issue of Geoinformatics, the European Union is now placing land rights at the heart of EU development policy. This article presents a way forwar...... in terms of building flexible and "fit-for-purpose" land administration systems in developing countries. This will ensure security of tenure for all and sustainable management of the use of land....

  15. PTFE films with improved flexibility

    Science.gov (United States)

    Muraca, R. F.; Koch, A. A.

    1972-01-01

    Development and application of flexible polytetrafluroethylene films for expulsion bladders in spacecraft propellant tanks are described. Flexibility of material is obtained by reducing crystallinity through annealing and quenching in water. Physical and mechanical properties of material are presented.

  16. Federal Support for Preserve America

    Science.gov (United States)

    Mississippi's Heritage Tourism Industry Post Hurricane Katrina also received a $150,000 Preserve America Grant Arkansas Delta, one for music, one for African-American history, and one for agriculture. The project will

  17. Cultural Preservation Program for Alaska

    Science.gov (United States)

    Barbaran, Francisco Ramon

    2011-01-01

    In this technical report, an innovative cultural preservation program for implementation in Athabascan villages is presented. The parameters for success in implementing such a project is discussed based on a workshop with Athabascan elders.

  18. Flexible automated manufacturing for SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Bilberg, Arne; Madsen, Erik Skov

    2017-01-01

    SMEs are in general highly flexible and agile in order to accommodate the customer demands in the paradigm of High Mix-Low Volume manufacturing. The flexibility and agility have mainly been enabled by manual labor, but as we are entering the technology and data driven fourth industrial revolution......, where augmented operators and machines work in cooperation in a highly flexible and productive manufacturing system both an opportunity and a need has raised for developing highly flexible and efficient automation....

  19. Hydrodynamic impact response, a flexible view

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Hoogeland, M.; Janssen, G.Th.M.

    2001-01-01

    The popularity of high-speed craft is steadily increasing. Until now, much attention has been focussed on the hydrodynamic aspects of these craft. The structural design of these vessels is usually considered in a quasi static sense. However, due to the requirement of light ship structures, fast ship

  20. Designing structural supply chain flexibility

    NARCIS (Netherlands)

    Mulinski, Ksawery Jan

    2012-01-01

    In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

  1. Global Analysis of Flexible Risers

    DEFF Research Database (Denmark)

    Banke, Lars

    1996-01-01

    Flexible pipes are often a technically attractive alternative to the traditional steel pipe. Often commercial utilisation of oil/gas fields depends on the use of flexible pipes. An example is when floating production vessels are used, where the flexible pipe follows the wave induced motions...

  2. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... options further? Fertility Preservation - Where Does It Fit? Options for Fertility Preservation The following diagram gives a brief description of fertility preservation options available to children diagnosed with cancer before and ...

  3. Hereditary History Preserving Bisimilarity Is Undecidable

    DEFF Research Database (Denmark)

    Jurdzinski, Marcin; Nielsen, Mogens

    2000-01-01

    History preserving bisimilarity (hp-bisimilarity) and hereditary history preserving bisimilarity (hhp-bisimilarity) are behavioural equivalences taking into account causal relationships between events of concurrent systems. Their prominent feature is being preserved under action refinement...

  4. Fertility Preservation for Children Diagnosed with Cancer

    Science.gov (United States)

    ... Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu ... with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for ...

  5. Redevelopment to Preserve Industrial Heritage. Appendix III

    International Nuclear Information System (INIS)

    2011-01-01

    generations, without compromising the ability of present generations to meet their own needs? Adaptive reuse is the act of finding a new use for a building or area. It is often described as a process by which structurally sound, older buildings are developed for economically viable new uses. The recycling of buildings initially developed as a method of protecting historically significant buildings from demolition. Adaptive reuse is a form of rehabilitation, as a variety of repairs or alterations to a building that allow it to serve contemporary uses while preserving features of the past. Adaptive reuse should always be favoured over demolition. There are countless reuse options available for industrial buildings. Some of the most popular conversions are of industrial buildings to museums, art studios, live- work units, offices, residential units, schools and retail, and increasingly are combining several uses together. Indeed, the only industrial buildings that have survived were those that were reused. It is not the scale or size that determines whether a structure survives, but whether it has been reused. The survival of cheap and flexible premises remaining after industries closed in the early 20th century acted as an incentive for new industries to move into the area. Instead of the area stagnating as it might have done, there were probably more new industries than at any other time, restarting the industrial cycle. If industrial heritage is seen as backward looking, as a drag on regeneration and economic development, and symbolic of decline and failure, then its future will continue to be questioned. Consequently, the key approach should relate to the focus of current regeneration programmes. It is very difficult to overstate the negative impact of a derelict and unmanaged industrial building on an urban area and its population: it holds down economic value, reduces confidence, may attract anti-social behaviour, and gives a message of failure and a lack of care and

  6. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for Children Diagnosed with Cancer Ask Your Doctor Information for ...

  7. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for Children Diagnosed with Cancer Ask Your Doctor Information for Patients Many adult ...

  8. Flexible Query Answering Systems

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 10th International Conference on Flexible Query Answering Systems, FQAS 2013, held in Granada, Spain, in September 2013. The 59 full papers included in this volume were carefully reviewed and selected from numerous submissions. The papers...... are organized in a general session train and a parallel special session track. The general session train covers the following topics: querying-answering systems; semantic technology; patterns and classification; personalization and recommender systems; searching and ranking; and Web and human...

  9. Determine viscoelastic mechanical properties of warm mix asphalt (WMA)-reclaimed asphalt pavement (RAP) mixes under high stresses in air-field flexible pavements and its impact on design life.

    Science.gov (United States)

    2014-06-01

    The introduction of larger aircrafts on flexible airfield pavements has led to a need for asphalt mixtures capable of sustaining such heavy : loads. This laboratory and analytical study investigated the mechanical responses of a number of modified as...

  10. Privacy preserving interactive record linkage (PPIRL).

    Science.gov (United States)

    Kum, Hye-Chung; Krishnamurthy, Ashok; Machanavajjhala, Ashwin; Reiter, Michael K; Ahalt, Stanley

    2014-01-01

    Record linkage to integrate uncoordinated databases is critical in biomedical research using Big Data. Balancing privacy protection against the need for high quality record linkage requires a human-machine hybrid system to safely manage uncertainty in the ever changing streams of chaotic Big Data. In the computer science literature, private record linkage is the most published area. It investigates how to apply a known linkage function safely when linking two tables. However, in practice, the linkage function is rarely known. Thus, there are many data linkage centers whose main role is to be the trusted third party to determine the linkage function manually and link data for research via a master population list for a designated region. Recently, a more flexible computerized third-party linkage platform, Secure Decoupled Linkage (SDLink), has been proposed based on: (1) decoupling data via encryption, (2) obfuscation via chaffing (adding fake data) and universe manipulation; and (3) minimum information disclosure via recoding. We synthesize this literature to formalize a new framework for privacy preserving interactive record linkage (PPIRL) with tractable privacy and utility properties and then analyze the literature using this framework. Human-based third-party linkage centers for privacy preserving record linkage are the accepted norm internationally. We find that a computer-based third-party platform that can precisely control the information disclosed at the micro level and allow frequent human interaction during the linkage process, is an effective human-machine hybrid system that significantly improves on the linkage center model both in terms of privacy and utility.

  11. Imparting Icephobicity with Substrate Flexibility

    Science.gov (United States)

    Schutzius, Thomas; Vasileiou, Thomas; Poulikakos, Dimos

    2017-11-01

    Ice accumulation poses serious safety and performance issues for modern infrastructure. Rationally designed superhydrophobic surfaces have demonstrated potential as a passive means to mitigate ice accretion; however, further studies on solutions that reduce impalement and contact time for impacting supercooled droplets are urgently needed. Here we demonstrate the collaborative effect of substrate flexibility and surface texture on enhancing icephobicity and repelling viscous droplets. We first investigate the influence of increased viscosity on impalement resistance and droplet-substrate contact time. Then we examine the effect of droplet partial solidification on recoil by impacting supercooled water droplets onto surfaces containing ice nucleation promoters. We demonstrate a passive method for shedding partially solidified droplets that does not rely on the classic recoil mechanism. Using an energy-based model, we identify a previously unexplored mechanism whereby the substrate oscillation governs the rebound process by efficiently absorbing the droplet kinetic energy and rectifying it back, allowing for droplet recoil. This mechanism applies for a range of droplet viscosities and ice slurries, which do not rebound from rigid superhydrophobic substrates. Partial support of the Swiss National Science Foundation under Grant No. 162565 and the European Research Council under Advanced Grant No. 669908 (INTICE) is acknowledged.

  12. Identification of critical factors affecting flexibility in hospital construction projects.

    Science.gov (United States)

    Olsson, Nils E O; Hansen, Geir K

    2010-01-01

    This paper analyzes the dynamics relating to flexibility in a hospital project context. Three research questions are addressed: (1) When is flexibility used in the life cycle of a project? (2) What are the stakeholders' perspectives on project flexibility? And (3) What is the nature of the interaction between flexibility in the process of a project and flexibility in terms of the characteristics of a building? Flexibility is discussed from both a project management point of view and from a hospital architecture perspective. Flexibility in project life cycle and from a stakeholder perspective is examined, and the interaction between flexibility in scope lock-in and building flexibility is investigated. The results are based on case studies of four Norwegian hospital projects. Information relating to the projects has been obtained from evaluation reports, other relevant documents, and interviews. Observations were codified and analyzed based on selected parameters that represent different aspects of flexibility. One of the cases illustrates how late changes can have a significant negative impact on the project itself, contributing to delays and cost overruns. Another case illustrates that late scope lock-in on a limited part of the project, in this case related to medical equipment, can be done in a controlled manner. Project owners and users appear to have given flexibility high priority. Project management teams are less likely to embrace changes and late scope lock-in. Architects and consultants are important for translating program requirements into physical design. A highly flexible building did not stop some stakeholders from pushing for significant changes and extensions during construction.

  13. Fertility preservation in Turner syndrome.

    Science.gov (United States)

    Grynberg, Michaël; Bidet, Maud; Benard, Julie; Poulain, Marine; Sonigo, Charlotte; Cédrin-Durnerin, Isabelle; Polak, Michel

    2016-01-01

    Premature ovarian insufficiency is a relatively rare condition that can appear early in life. In a non-negligible number of cases the ovarian dysfunction results from genetic diseases. Turner syndrome (TS), the most common sex chromosome abnormality in females, is associated with an inevitable premature exhaustion of the follicular stockpile. The possible or probable infertility is a major concern for TS patients and their parents, and physicians are often asked about possible options to preserve fertility. Unfortunately, there are no recommendations on fertility preservation in this group. The severely reduced follicle pool even during prepubertal life represents the major limit for fertility preservation and is the root of numerous questions regarding the competence of gametes or ovarian tissue crybanked. In addition, patients suffering from TS show higher than usual rates of spontaneous abortion, fetal anomaly, and maternal morbidity and mortality, which should be considered at the time of fertility preservation and before reutilization of the cryopreserved gametes. Apart from fulfillment of the desire of becoming genetic parents, TS patients may be potential candidates for egg donation, gestational surrogacy, and adoption. The present review discusses the different options for preserving female fertility in TS and the ethical questions raised by these approaches. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  14. Asymmetric Flexible Supercapacitor Stack

    Directory of Open Access Journals (Sweden)

    Leela Mohana Reddy A

    2008-01-01

    Full Text Available AbstractElectrical double layer supercapacitor is very significant in the field of electrical energy storage which can be the solution for the current revolution in the electronic devices like mobile phones, camera flashes which needs flexible and miniaturized energy storage device with all non-aqueous components. The multiwalled carbon nanotubes (MWNTs have been synthesized by catalytic chemical vapor deposition technique over hydrogen decrepitated Mischmetal (Mm based AB3alloy hydride. The polymer dispersed MWNTs have been obtained by insitu polymerization and the metal oxide/MWNTs were synthesized by sol-gel method. Morphological characterizations of polymer dispersed MWNTs have been carried out using scanning electron microscopy (SEM, transmission electron microscopy (TEM and HRTEM. An assymetric double supercapacitor stack has been fabricated using polymer/MWNTs and metal oxide/MWNTs coated over flexible carbon fabric as electrodes and nafion®membrane as a solid electrolyte. Electrochemical performance of the supercapacitor stack has been investigated using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy.

  15. Wavelet domain image restoration with adaptive edge-preserving regularization.

    Science.gov (United States)

    Belge, M; Kilmer, M E; Miller, E L

    2000-01-01

    In this paper, we consider a wavelet based edge-preserving regularization scheme for use in linear image restoration problems. Our efforts build on a collection of mathematical results indicating that wavelets are especially useful for representing functions that contain discontinuities (i.e., edges in two dimensions or jumps in one dimension). We interpret the resulting theory in a statistical signal processing framework and obtain a highly flexible framework for adapting the degree of regularization to the local structure of the underlying image. In particular, we are able to adapt quite easily to scale-varying and orientation-varying features in the image while simultaneously retaining the edge preservation properties of the regularizer. We demonstrate a half-quadratic algorithm for obtaining the restorations from observed data.

  16. WP 115 - More flexibility for more innovation? Evidence from the Netherlands

    OpenAIRE

    Blind, K.

    2011-01-01

    Labor market flexibility continues to be one of economics, politics and society highly debated topic. In recent years, the impact of increased labor market flexibility on research and innovation has gained more and more attention. Previous studies have shown, depending on the measurement of flexibility as well as on the data that both positive and negative influences can be found. However, the financial flexibility in terms of wage rigidities has hardly been explored empirically. With the use...

  17. Corporate Financial Flexibility, Investment Activities, and Cash Holding: Evidence From Indonesia

    OpenAIRE

    Rahmat Heru Setianto; Addenver Kusumaputra

    2017-01-01

    This paper examines empirically the impact of financial flexibility on investment activities. Furthermore, we also investigate how financial flexibility determines the sensitivity of investment activities to cash flow. Using annual data of Indonesian manufacturing firms spanning five years, our analyses reveal that financial flexibility enhances investment ability and decreases sensitivity of investment activities to cash flow. Further analysis indicates that financially flexible firms in Ind...

  18. Preservation theorems on finite structures

    International Nuclear Information System (INIS)

    Hebert, M.

    1994-09-01

    This paper concerns classical Preservation results applied to finite structures. We consider binary relations for which a strong form of preservation theorem (called strong interpolation) exists in the usual case. This includes most classical cases: embeddings, extensions, homomorphisms into and onto, sandwiches, etc. We establish necessary and sufficient syntactic conditions for the preservation theorems for sentences and for theories to hold in the restricted context of finite structures. We deduce that for all relations above, the restricted theorem for theories hold provided the language is finite. For the sentences the restricted version fails in most cases; in fact the ''homomorphism into'' case seems to be the only possible one, but the efforts to show that have failed. We hope our results may help to solve this frustrating problem; in the meantime, they are used to put a lower bound on the level of complexity of potential counterexamples. (author). 8 refs

  19. Blogs as Objects of Preservation

    DEFF Research Database (Denmark)

    Stepanyan, Karen; Gkotsis, George; Kalb, Hendrik

    2012-01-01

    challenge for the digital preservation community. While the methodological frameworks for selecting these properties provide a good foundation, a continued discussion is necessary for further clarifying and improving the available methods. This paper advances earlier work by building on the exist......challenge for the digital preservation community. While the methodological frameworks for selecting these properties provide a good foundation, a continued discussion is necessary for further clarifying and improving the available methods. This paper advances earlier work by building...... analysis) and, subsequently, improve the final reformulation of the properties. To demonstrate the applicability of the modified framework, the paper presents a use case of a blog preservation initiative that is informed by stakeholder interviews and evaluation of structural and technological foundations...

  20. Compressibility-aware media retargeting with structure preserving.

    Science.gov (United States)

    Wang, Shu-Fan; Lai, Shang-Hong

    2011-03-01

    A number of algorithms have been proposed for intelligent image/video retargeting with image content retained as much as possible. However, they usually suffer from some artifacts in the results, such as ridge or structure twist. In this paper, we present a structure-preserving media retargeting technique that preserves the content and image structure as best as possible. Different from the previous pixel or grid based methods, we estimate the image content saliency from the structure of the content. A block structure energy is introduced with a top-down strategy to constrain the image structure inside to deform uniformly in either x or y direction. However, the flexibilities for retargeting are quite different for different images. To cope with this problem, we propose a compressibility assessment scheme for media retargeting by combining the entropies of image gradient magnitude and orientation distributions. Thus, the resized media is produced to preserve the image content and structure as best as possible. Our experiments demonstrate that the proposed method provides resized images/videos with better preservation of content and structure than those by the previous methods.

  1. Active preservation - otherwise no archives

    International Nuclear Information System (INIS)

    Norberg, E.

    1996-01-01

    The role and history of national and regional archives in Sweden is discussed. It is noted that large portions of our cultural heritage can not be set aside for long-term preservation due to several facts: Some events are never documented, Important records are never set aside, Important information is stored on media that are not suitable for long-term preservation, Information can not be accessed due to inadequate search aids, Eliminations are made due to lack of space. Strategies for an action plan to save valuable material are briefly outlined, and the importance of international cooperation is stressed

  2. Yeasts preservation: alternatives for lyophilisation

    OpenAIRE

    Nyanga, Loveness K.; Nout, Martinus J. R.; Smid, Eddy J.; Boekhout, Teun; Zwietering, Marcel H.

    2012-01-01

    The aim of the study was to compare the effect of two low-cost, low technology traditional methods for drying starter cultures with standard lyophilisation. Lyophilised yeast cultures and yeast cultures preserved in dry rice cakes and dry plant fibre strands were examined for viable cell counts during 6 months storage at 4 and 25 °C. None of the yeast cultures showed a significant loss in viable cell count during 6 months of storage at 4 °C upon lyophilisation and preservation in dry rice cak...

  3. Polarization-preserving holey fibers

    DEFF Research Database (Denmark)

    Broeng, Jes; Mogilevtsev, Dmitri; Libori, Stig E. Barkou

    2001-01-01

    In this work we suggest and discuss a microstructure of air capillaries with elliptical cross-section in a tread of glass that gives opportunity for Creation of polarization-preserving fiber with very small beat length between the fundamental modes of different polarization......In this work we suggest and discuss a microstructure of air capillaries with elliptical cross-section in a tread of glass that gives opportunity for Creation of polarization-preserving fiber with very small beat length between the fundamental modes of different polarization...

  4. Active preservation - otherwise no archives

    Energy Technology Data Exchange (ETDEWEB)

    Norberg, E [National Swedish Archives, Stockholm (Sweden)

    1996-12-01

    The role and history of national and regional archives in Sweden is discussed. It is noted that large portions of our cultural heritage can not be set aside for long-term preservation due to several facts: Some events are never documented, Important records are never set aside, Important information is stored on media that are not suitable for long-term preservation, Information can not be accessed due to inadequate search aids, Eliminations are made due to lack of space. Strategies for an action plan to save valuable material are briefly outlined, and the importance of international cooperation is stressed.

  5. Supply chain integration, risk management and manufacturing flexibility

    DEFF Research Database (Denmark)

    Chaudhuri, Atanu; Boer, Harry; Taran, Yariv

    2018-01-01

    , respectively, and manufacturing flexibility. Design/methodology/approach – Using hierarchical regression, data are analyzed from a sample of 343 manufacturing plants in Asia collected in 2013-2014 as part of the International Manufacturing Strategy Survey (IMSS VI). Findings – Internal integration and supply......Purpose – The purpose of this paper is to investigate the impact of internal integration, external integration and supply chain risk management on manufacturing flexibility, and the moderating effect of supply chain risk management on the relationships between internal and external integration...... chain risk management have a direct effect on manufacturing flexibility. Supply chain risk management moderates the relationship between external integration and flexibility. Research limitations/implications – Further research is needed to generalize beyond the flexibility performance of discrete...

  6. 36 CFR 910.32 - Historic preservation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Historic preservation. 910.32... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.32 Historic preservation... Preservation Plan of the Corporation, are specified for preservation, shall be acomplished (a) in accordance...

  7. ACHP | Summary of the Preserve America Initiative

    Science.gov (United States)

    Initiative Preserve America: Explore and Enjoy Our Heritage (logo) Summary of the Preserve America Initiative Preserve America is a White House initiative that encourages and supports community efforts to preserve and enjoy our priceless cultural and natural heritage. The goals of the initiative include a greater shared

  8. Comparison of Tissue Preservation using Formalin and Ethanol as Preservative Formula

    OpenAIRE

    See Woan Shian; Arifin Soenggono; Sawkar Vijay Pramod

    2016-01-01

    Background: Tissue preservation can be performed through embalming, by providing the chemical embalming fluid to the human remains. Formalin’s preservative formula is the foundation for modern methods of embalming. Unfortunately, this preservative formula has several disadvantages. While Ethanol’s preservative formula is a considerable agent to replace formalin’s preservative formula. The aim of this study was to compare the tissue preservation using formalin and ethanol as preservative formu...

  9. On flexible and rigid nouns

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2010-01-01

    classes. Finally this article wants to claim that the distinction between rigid and flexible noun categories (a) adds a new dimension to current classifications of parts of speech systems, (b) correlates with certain grammatical phenomena (e.g. so-called number discord), and (c) helps to explain the parts......This article argues that in addition to the major flexible lexical categories in Hengeveld’s classification of parts of speech systems (Contentive, Non-Verb, Modifier), there are also flexible word classes within the rigid lexical category Noun (Set Noun, Sort Noun, General Noun). Members...... by the flexible item in the external world. I will then argue that flexible word classes constitute a proper category (i.e. they are not the result of a merger of some rigid word classes) in that members of flexible word categories display the same properties regarding category membership as members of rigid word...

  10. On flexible and rigid nouns

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2008-01-01

    Studies in Language 32-3 (2008), 727-752. Special issue: Parts of Speech: Descriptive tools, theoretical constructs Jan Rijkhoff - On flexible and rigid nouns This article argues that in addition to the flexible lexical categories in Hengeveld’s classification of parts-of-speech systems (Contentive......, Non-Verb, Modifier), there are also flexible word classes within the rigid lexical category Noun (Set Noun, Sort Noun, General Noun). Members of flexible word classes are characterized by their vague semantics, which in the case of nouns means that values for the semantic features Shape...... and Homogeneity are either left undetermined or they are specified in such a way that they do not quite match the properties of the kind of entity denoted by the flexible item in the external world. I will then argue that flexible word classes constitute a proper category (i.e. they are not the result of a merger...

  11. Flexible Language Interoperability

    DEFF Research Database (Denmark)

    Ekman, Torbjörn; Mechlenborg, Peter; Schultz, Ulrik Pagh

    2007-01-01

    Virtual machines raise the abstraction level of the execution environment at the cost of restricting the set of supported languages. Moreover, the ability of a language implementation to integrate with other languages hosted on the same virtual machine typically constrains the features...... of the language. In this paper, we present a highly flexible yet efficient approach to hosting multiple programming languages on an object-oriented virtual machine. Our approach is based on extending the interface of each class with language-specific wrapper methods, offering each language a tailored view...... of a given class. This approach can be deployed both on a statically typed virtual machine, such as the JVM, and on a dynamic virtual machine, such as a Smalltalk virtual machine. We have implemented our approach to language interoperability on top of a prototype virtual machine for embedded systems based...

  12. Flexible cultural repertoires

    DEFF Research Database (Denmark)

    Lindegaard, Marie Rosenkrantz; Zimmermann, Francisca

    2017-01-01

    Despite extensive studies of street culture and the risks of offending and victimization in urban marginalized areas, little is known about the role of cultural repertoires for variation in victimization risks among young men not involved in crime. Based on two ethnographic studies, conducted...... independently of the authors in neighbouring township areas of Cape Town, we offer insights into patterns of victimization among young men not involved in crime who live and attend school in the townships. Young men WHO perform decent cultural repertoires are highly exposed to victimization due to their moral...... rejection of crime-involved youth. Young men who perform flexible cultural repertoires, by incorporating and shifting between gang and decent repertoires, experience low victimization due to their adaptation to crime-involved youth. Findings emphasize the importance of detailed investigations of the way...

  13. Flexible helical yarn swimmers.

    Science.gov (United States)

    Zakharov, A P; Leshansky, A M; Pismen, L M

    2016-09-01

    We investigate the motion of a flexible Stokesian flagellar swimmer realised as a yarn made of two intertwined elastomer fibres, one active, that can reversibly change its length in response to a local excitation causing transition to the nematic state or swelling, and the other one, a passive isotropic elastomer with identical mechanical properties. A propagating chemical wave may provide an excitation mechanism ensuring a constant length of the excited region. Generally, the swimmer moves along a helical trajectory, and the propagation and rotation velocity are very sensitive to the ratio of the excited region to the pitch of the yarn, as well as to the size of a carried load. External excitation by a moving actuating beam is less effective, unless the direction of the beam is adjusted to rotation of the swimmer.

  14. Flexible weapons architecture design

    Science.gov (United States)

    Pyant, William C., III

    Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.

  15. Conformational flexibility of aspartame.

    Science.gov (United States)

    Toniolo, Claudio; Temussi, Pierandrea

    2016-05-01

    L-Aspartyl-L-phenylalanine methyl ester, better known as aspartame, is not only one of the most used artificial sweeteners, but also a very interesting molecule with respect to the correlation between molecular structure and taste. The extreme conformational flexibility of this dipeptide posed a huge difficulty when researchers tried to use it as a lead compound to design new sweeteners. In particular, it was difficult to take advantage of its molecular model as a mold to infer the shape of the, then unknown, active site of the sweet taste receptor. Here, we follow the story of the 3D structural aspects of aspartame from early conformational studies to recent docking into homology models of the receptor. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 376-384, 2016. © 2016 Wiley Periodicals, Inc.

  16. Preservation of fresh avocados by irradiation

    International Nuclear Information System (INIS)

    Karmelic, J.

    1985-01-01

    Avocado is the fifth most important fruit in Chile, which exports fruits to Europe. The production of avocado has increased from 14,000 metric tons in 1978 to a projected 70,000 metric tons in 1985. The main problem of shipping fresh Chilean avocado to Europe has been its short shelf life, being around 24 days with a maximum of 30 days. To market fresh Chilean avocados in Europe, adequate keeping quality must be assured for 40 or more days. A project on the preservation of fresh Chilean avocados supported by the International Atomic Energy Agency (IAEA) takes the approach of combining mild heat and low-dose gamma-radiation. Two varieties of avocados were studied (Hass and Fuerte) and two batches of each were treated: one at the beginning and the other at the end of the picking season. In each case a combination of heat treatment (46 0 C for 10 minutes) and irradiation was applied. Fruits were individually wrapped with flexible PVC and placed in cardboard boxes containing 20 each. Fruits treated with 25,50, and 100 Gy were compared with two controls: one with and another without individual wrapping

  17. Local quantum channels preserving classical correlations

    International Nuclear Information System (INIS)

    Guo Zhihua; Cao Huaixin

    2013-01-01

    The aim of this paper is to discuss local quantum channels that preserve classical correlations. First, we give two equivalent characterizations of classical correlated states. Then we obtain the relationships among classical correlation-preserving local quantum channels, commutativity-preserving local quantum channels and commutativity-preserving quantum channels on each subsystem. Furthermore, for a two-qubit system, we show the general form of classical correlation-preserving local quantum channels. (paper)

  18. EFFECT OF FLEXIBILITY ON THE RESULTS OF DOLPHIN SWIMMING TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Slađana Tošić

    2011-09-01

    Full Text Available In order to determine the impact of flexibility on the results in swimming, we conducted a study on a sample of 50 female patients aged 11-14 years of age who are in the training process in the swimming clubs „Nis 2005“ and „Sveti Nikola“ in Nis. The study is applied to 14 measuring instruments that were divided into three groups: Measuring instruments for the assessment of flexibility (11; Measuring instruments for assessing the results of swimming (1; Measuring instruments for evaluation of morphological characteristics (2. The regression analysis determined the impact of flexibility on the results in swimming. The regression analysis didn't confirmed the assumption that there is a statistically significant effect of flexibility variables on results in swimming for female swimmers

  19. A revolution in food preservation

    International Nuclear Information System (INIS)

    1986-01-01

    A brief consumer guide to food irradiation is presented. Aspects covered include some of the advantages of food irradiation compared to other methods of food preservation, the type of radiation used, the mechanism of action, some practical applications, safety and future benefits. (UK)

  20. Hardcore Heritage: imagination for preservation

    NARCIS (Netherlands)

    Rietveld, E.; Rietveld, R.

    2017-01-01

    Should the practice of the historic preservation of built and landscape heritage necessarily be based on conservation? Monuments, listed buildings, landscapes, and other forms of built heritage, are typically regarded as immutable and untouchable—objects to be “conserved”—and as a result tend to

  1. 2007 Preserve America Presidential Awards

    Science.gov (United States)

    aviation history museum that emphasizes people and culture as well as technology and events. With a the Private Preservation category, the two winners are: The History Channel, Save Our History Save Our History were Abbe Raven, president and CEO, A&E Television Networks; and Nancy Dubuc

  2. Yeasts preservation: alternatives for lyophilisation

    NARCIS (Netherlands)

    Nyanga, L.K.; Nout, M.J.R.; Smid, E.J.; Boekhout, T.; Zwietering, M.H.

    2012-01-01

    The aim of the study was to compare the effect of two low-cost, low technology traditional methods for drying starter cultures with standard lyophilisation. Lyophilised yeast cultures and yeast cultures preserved in dry rice cakes and dry plant fibre strands were examined for viable cell counts

  3. Beyond the Scope of Preservation?

    DEFF Research Database (Denmark)

    Rikke, Stenbro,; Riesto, Svava

    2014-01-01

    Why are some parts of the built environment protected as national heritage and others not? Listing is the most restrictive tool of Norwegian and Danish preservation in the built environment and creates a specific version of the past told through buildings and sites. The heritage authorities in both...

  4. Igbo ideas of preserving 'nature' and the globalizing world | Nweke ...

    African Journals Online (AJOL)

    The intent of this paper is to x-ray and know if the pristine ways (prior to Western influences) Igbo people used to preserve 'nature' in their traditional setting could still be of any relevance in salvaging the world‟s endangered environment in the face of the towering impact of globalization with its accoutrements of modern ...

  5. Preservation of live cultures of basidiomycetes - Recent methods

    Czech Academy of Sciences Publication Activity Database

    Homolka, Ladislav

    2014-01-01

    Roč. 118, č. 2 (2014), s. 107-125 ISSN 1878-6146 R&D Projects: GA ČR GAP504/12/0709 Institutional support: RVO:61388971 Keywords : Fungi * Maintenance methods * Long-term preservation Subject RIV: EE - Microbiology, Virology Impact factor: 2.342, year: 2014

  6. Role of Pectoral Fin Flexibility in Robotic Fish Performance

    Science.gov (United States)

    Bazaz Behbahani, Sanaz; Tan, Xiaobo

    2017-08-01

    Pectoral fins play a vital role in the maneuvering and locomotion of fish, and they have become an important actuation mechanism for robotic fish. In this paper, we explore the effect of flexibility of robotic fish pectoral fins on the robot locomotion performance and mechanical efficiency. A dynamic model for the robotic fish is presented, where the flexible fin is modeled as multiple rigid elements connected via torsional springs and dampers. Blade element theory is used to capture the hydrodynamic force on the fin. The model is validated with experimental results obtained on a robotic fish prototype, equipped with 3D-printed fins of different flexibility. The model is then used to analyze the impacts of fin flexibility and power/recovery stroke speed ratio on the robot swimming speed and mechanical efficiency. It is found that, in general, flexible fins demonstrate advantages over rigid fins in speed and efficiency at relatively low fin-beat frequencies, while rigid fins outperform flexible fins at higher frequencies. For a given fin flexibility, the optimal frequency for speed performance differs from the optimal frequency for mechanical efficiency. In addition, for any given fin, there is an optimal power/recovery stroke speed ratio, typically in the range of 2-3, that maximizes the speed performance. Overall, the presented model offers a promising tool for fin flexibility and gait design, to achieve speed and efficiency objectives for robotic fish actuated with pectoral fins.

  7. Design and optimization of flexible multi-generation systems

    DEFF Research Database (Denmark)

    Lythcke-Jørgensen, Christoffer Ernst

    variations and dynamics, and energy system analysis, which fails to consider process integration synergies in local systems. The primary objective of the thesis is to derive a methodology for linking process design practices with energy system analysis for enabling coherent and holistic design optimization...... of flexible multi-generation system. In addition, the case study results emphasize the importance of considering flexible operation, systematic process integration, and systematic assessment of uncertainties in the design optimization. It is recommended that future research focus on assessing system impacts...... from flexible multi-generation systems and performance improvements from storage options....

  8. Hybrid Food Preservation Program Improves Food Preservation and Food Safety Knowledge

    Science.gov (United States)

    Francis, Sarah L.

    2014-01-01

    The growing trend in home food preservation raises concerns about whether the resulting food products will be safe to eat. The increased public demand for food preservation information led to the development of the comprehensive food preservation program, Preserve the Taste of Summer (PTTS). PTTS is a comprehensive hybrid food preservation program…

  9. Selection of irradiator for potato preservation

    Energy Technology Data Exchange (ETDEWEB)

    Kinsara, A R; Melaibari, A G; Abulfaraj, W H; Mamoon, A M; Kamal, S E [Nuclear Engineering Department, Faculty of Engineering, King Abdulaziz University P.O.Box 9027, Jeddah-21413, (Saudi Arabia)

    1997-12-31

    A formal decision methodology is a sound approach for assisting in decision making needed for the selection of irradiators for Potato preservation. A formal analysis is preferred over an informal intuitive analysis which has limitations. This will focus on substantial issues and provide the basis for a compromise between conflicting objectives. All critical issues in selection of irradiators for Potato preservation can be addressed within the decision analysis framework. Of special significance is the treatment of the uncertainly associated with consequences of a decision and the preferences of the experts. A decision theory is employed in providing a strategy for implementation of the irradiator selection for food preservation for Saudi Arabia. To select a suitable decision methodology for the present case, a detailed survey of available decision methods was conducted. These methods have been developed and applied with varying degrees of success to many diverse areas of interest. Based on detailed surveys, the Analytic Hierarchy process (AHP) was selected to evaluate the various irradiators for Potato irradiation. These are electron accelerators, X-ray irradiators, and gamma irradiators. The purpose was to determine the optimal. The set of factors impacting irradiator selection were developed and defined to provide comprehensive and realistic variables that judge the represented irradiator alternatives. The factors developed are economic considerations, technical considerations, safety aspects, and compatibility with local environment. The AHP computer program was developed to computerize the tedious complicated computations towards implementing the AHP systematic procedures to solve the present problem. The program was developed using FOXPRO. Based upon the available data, and employing the APH computer program, the results show superiority of {sup 60} Co gamma-ray irradiator over other irradiators for saudi arabia`s present circumstances. 2 figs.,7 tabs.

  10. Flexible nanomembrane photonic-crystal cavities for tensilely strained-germanium light emission

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Jian; Wang, Xiaowei; Paiella, Roberto [Department of Electrical and Computer Engineering and Photonics Center, Boston University, 8 Saint Mary' s Street, Boston, Massachusetts 02215 (United States); Cui, Xiaorui; Sookchoo, Pornsatit; Lagally, Max G. [Department of Materials Science and Engineering, University of Wisconsin – Madison, 1509 University Avenue, Madison, Wisconsin 53706 (United States)

    2016-06-13

    Flexible photonic-crystal cavities in the form of Si-column arrays embedded in polymeric films are developed on Ge nanomembranes using direct membrane assembly. The resulting devices can sustain large biaxial tensile strain under mechanical stress, as a way to enhance the Ge radiative efficiency. Pronounced emission peaks associated with photonic-crystal cavity resonances are observed in photoluminescence measurements. These results show that ultrathin nanomembrane active layers can be effectively coupled to an optical cavity, while still preserving their mechanical flexibility. Thus, they are promising for the development of strain-enabled Ge lasers, and more generally uniquely flexible optoelectronic devices.

  11. Low-level efficacy of cosmetic preservatives

    DEFF Research Database (Denmark)

    Lundov, M D; Johansen, J D; Zachariae, C

    2011-01-01

    Preservation using combinations of preservatives has several advantages. This study shows that the concentration of some of the most frequently used allergenic preservatives can be markedly lowered when they are combined with phenoxyethanol. The antimicrobial efficacy of cosmetic preservatives...... of the preservatives indicated additive effects against the microorganisms. No combination of preservatives showed any inhibitory action on each other. Challenge tests with different concentrations and combinations were performed in a cosmetic cream. Diazolidinyl urea and MCI/MI alone were ineffective against C....... albicans in a challenge test at concentrations up to 16 times higher than the observed MIC values. When combining phenoxyethanol with either one of the allergenic preservatives diazolidinyl urea, MCI/MI or MI, the cosmetic cream was adequately preserved at concentrations well below the preservatives' MIC values as well...

  12. Special Issue: Flexible Work Arrangements.

    Science.gov (United States)

    Olmstead, Barney, Ed.

    1996-01-01

    Section 1 contains five chapters on flexible work arrangements, self-employment, working from home, part-time professionals, job sharing, and temporary employment. Section 2 includes reviews of four books on working flexibly, concluding with a list of 23 additional readings. (SK)

  13. Measuring and Comparing Energy Flexibilities

    DEFF Research Database (Denmark)

    Valsomatzis, Emmanouil; Hose, Katja; Pedersen, Torben Bach

    2015-01-01

    induced by time and amount individually, and by their com- bination. To this end, we introduce several flexibility measures that take into account the combined effect of time and energy on flex-offer flexibility and discuss their respective pros and cons through a number of realistic examples....

  14. Sensor Technologies on Flexible Substrates

    Science.gov (United States)

    Koehne, Jessica

    2016-01-01

    NASA Ames has developed sensor technologies on flexible substrates integrated into textiles for personalized environment monitoring and human performance evaluation. Current technologies include chemical sensing for gas leak and event monitoring and biological sensors for human health and performance monitoring. Targeted integration include next generation EVA suits and flexible habitats.

  15. Functional aspects of protein flexibility

    DEFF Research Database (Denmark)

    Teilum, Kaare; Olsen, Johan G; Kragelund, Birthe B

    2009-01-01

    this into an intuitive perception of protein function is challenging. Flexibility is of overwhelming importance for protein function, and the changes in protein structure during interactions with binding partners can be dramatic. The present review addresses protein flexibility, focusing on protein-ligand interactions...

  16. Preserving and Archiving Astronomical Photographic Plates

    Science.gov (United States)

    Castelaz, M. W.; Cline, J. D.

    2005-05-01

    Astronomical objects change with time. New observations complement past observations recorded on photographic plates. Analyses of changes provide essential routes to information about an object's formation, constitution and evolution. Preserving a century of photographic plate observations is thus of paramount importance. Plate collections are presently widely dispersed; plates may be stored in poor conditions, and are effectively inaccessible to both researchers and historians. We describe a planned project at Pisgah Astronomical Research Institute to preserve the collections of astronomical plates in the United States by gathering them into a single storage location. Collections will be sorted, cleaned, and cataloged on-line so as to provide access to researchers. Full scientific and historic use of the material then requires the observations themselves to be accessible digitally. The project's goal will be the availability of these data as a unique, fully-maintained scientific and educational resource. The new archive will support trans-disciplinary research such as the chemistry of the Earth's atmosphere, library information science, trends in local weather patterns, and impacts of urbanization on telescope use, while the hand-written observatory logs will be a valuable resource for science historians and biographers.

  17. Influence of relief on permanent preservation areas.

    Science.gov (United States)

    Dos Santos, Alexandre Rosa; Chimalli, Tessa; Peluzio, João Batista Esteves; da Silva, Aderbal Gomes; Dos Santos, Gleissy Mary Amaral Dino Alves; Lorenzon, Alexandre Simões; Teixeira, Thaisa Ribeiro; de Castro, Nero Lemos Martins; Soares Ribeiro, Carlos Antonio Alvares

    2016-01-15

    Many countries have environmental legislation to protecting natural resources on private property. In Brazil, the Brazilian Forestry Code determines specific areas to maintain with natural vegetation cover, known as areas of permanent preservation (APP). Currently, there are few studies that relate topographic variables on APP. In this context, we sought to evaluate the influence of relief on the conservation of areas of permanent preservation (APP) in the areas surrounding Caparaó National Park, Brazil. By using the chi-squared statistical test, we verified that the presence of forest cover is closely associated with altitude. The classes of APP in better conservation status are slopes in addition to hilltops and mountains, whereas APP streams and springs are among the areas most affected by human activities. The most deforested areas are located at altitudes below 1100.00 m and on slopes less than 45°. All orientations of the sides were significant for APP conservation status, with the southern, southeastern, and southwestern sides showing the lower degrees of impact. The methodology can be adjusted to environmental legislation to other countries.

  18. Balancing stability and flexibility in adaptive governance: An analysis of tools available in U.S. environmental law

    Science.gov (United States)

    Kundis Craig, Robin; Garmestani, Ahjond S.; Allen, Craig R.; Arnold, Craig Anthony (Tony); Birge, Hannah E.; DeCaro, Daniel A.; Fremier, Alexander K.; Gosnell, Hannah; Schlager, Edella

    2017-01-01

    Adaptive governance must work “on the ground,” that is, it must operate through structures and procedures that the people it governs perceive to be legitimate and fair, as well as incorporating processes and substantive goals that are effective in allowing social-ecological systems (SESs) to adapt to climate change and other impacts. To address the continuing and accelerating alterations that climate change is bringing to SESs, adaptive governance generally will require more flexibility than prior governance institutions have often allowed. However, to function as good governance, adaptive governance must pay real attention to the problem of how to balance this increased need for flexibility with continuing governance stability so that it can foster adaptation to change without being perceived or experienced as perpetually destabilizing, disruptive, and unfair. Flexibility and stability serve different purposes in governance, and a variety of tools exist to strike different balances between them while still preserving the governance institution’s legitimacy among the people governed. After reviewing those purposes and the implications of climate change for environmental governance, we examine psychological insights into the structuring of adaptive governance and the variety of legal tools available to incorporate those insights into adaptive governance regimes. Because the substantive goals of governance systems will differ among specific systems, we do not purport to comment on what the normative or substantive goals of law should be. Instead, we conclude that attention to process and procedure (including participation), as well as increased use of substantive standards (instead of rules), may allow an increased level of substantive flexibility to operate with legitimacy and fairness, providing the requisite levels of psychological, social, and economic stability needed for communities to adapt successfully to the Anthropocene.

  19. Balancing stability and flexibility in adaptive governance: an analysis of tools available in U.S. environmental law

    Directory of Open Access Journals (Sweden)

    Robin Kundis. Craig

    2017-06-01

    Full Text Available Adaptive governance must work "on the ground," that is, it must operate through structures and procedures that the people it governs perceive to be legitimate and fair, as well as incorporating processes and substantive goals that are effective in allowing social-ecological systems (SESs to adapt to climate change and other impacts. To address the continuing and accelerating alterations that climate change is bringing to SESs, adaptive governance generally will require more flexibility than prior governance institutions have often allowed. However, to function as good governance, adaptive governance must pay real attention to the problem of how to balance this increased need for flexibility with continuing governance stability so that it can foster adaptation to change without being perceived or experienced as perpetually destabilizing, disruptive, and unfair. Flexibility and stability serve different purposes in governance, and a variety of tools exist to strike different balances between them while still preserving the governance institution's legitimacy among the people governed. After reviewing those purposes and the implications of climate change for environmental governance, we examine psychological insights into the structuring of adaptive governance and the variety of legal tools available to incorporate those insights into adaptive governance regimes. Because the substantive goals of governance systems will differ among specific systems, we do not purport to comment on what the normative or substantive goals of law should be. Instead, we conclude that attention to process and procedure (including participation, as well as increased use of substantive standards (instead of rules, may allow an increased level of substantive flexibility to operate with legitimacy and fairness, providing the requisite levels of psychological, social, and economic stability needed for communities to adapt successfully to the Anthropocene.

  20. Flexible ring seal

    International Nuclear Information System (INIS)

    Abbes, Claude; Gournier, Andre; Rouaud, Christian; Villepoix, Raymond de.

    1976-01-01

    The invention concerns a flexible metal ring seal, able to ensure a perfect seal between two bearings due to the crushing and elastic deformation properties akin to similar properties in elastomers. Various designs of seal of this kind are already known, particularly a seal made of a core formed by a helical wire spring with close-wound turns and with high axial compression ratio, closed on itself and having the shape of an annulus. This wire ring is surrounded by at least one envelope having at rest the shape of a toroidal surface of which the generating circle does not close on itself. In a particular design mode, the seal in question can include, around the internal spring, two envelopes of which one in contact with the spring is composed of a low ductility elastic metal, such as mild steel or stainless steel and the other is, on the contrary, made of a malleable metal, such as copper or nickel. The first envelope evenly distributes the partial crushing of the spring, when the seal is tightened, on the second envelope which closely fits the two surfaces between which the seal operates. The stress-crushing curve characteristic of the seal comprises two separate parts, the first with a relatively sharp slope corresponds to the start of the seal compression phase, enabling at least some of these curves to reach the requisite seal threshold very quickly, then, beyond this, a second part, practically flat, where the stress is appreciably constant for a wide operating bracket [fr

  1. Flexible piezotronic strain sensor.

    Science.gov (United States)

    Zhou, Jun; Gu, Yudong; Fei, Peng; Mai, Wenjie; Gao, Yifan; Yang, Rusen; Bao, Gang; Wang, Zhong Lin

    2008-09-01

    Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a polydimethylsiloxane (PDMS) thin layer. The PFW has Schottky contacts at its two ends but with distinctly different barrier heights. The I- V characteristic is highly sensitive to strain mainly due to the change in Schottky barrier height (SBH), which scales linear with strain. The change in SBH is suggested owing to the strain induced band structure change and piezoelectric effect. The experimental data can be well-described by the thermionic emission-diffusion model. A gauge factor of as high as 1250 has been demonstrated, which is 25% higher than the best gauge factor demonstrated for carbon nanotubes. The strain sensor developed here has applications in strain and stress measurements in cell biology, biomedical sciences, MEMS devices, structure monitoring, and more.

  2. Orthogonal flexible Rydberg aggregates

    Science.gov (United States)

    Leonhardt, K.; Wüster, S.; Rost, J. M.

    2016-02-01

    We study the link between atomic motion and exciton transport in flexible Rydberg aggregates, assemblies of highly excited light alkali-metal atoms, for which motion due to dipole-dipole interaction becomes relevant. In two one-dimensional atom chains crossing at a right angle adiabatic exciton transport is affected by a conical intersection of excitonic energy surfaces, which induces controllable nonadiabatic effects. A joint exciton-motion pulse that is initially governed by a single energy surface is coherently split into two modes after crossing the intersection. The modes induce strongly different atomic motion, leading to clear signatures of nonadiabatic effects in atomic density profiles. We have shown how this scenario can be exploited as an exciton switch, controlling direction and coherence properties of the joint pulse on the second of the chains [K. Leonhardt et al., Phys. Rev. Lett. 113, 223001 (2014), 10.1103/PhysRevLett.113.223001]. In this article we discuss the underlying complex dynamics in detail, characterize the switch, and derive our isotropic interaction model from a realistic anisotropic one with the addition of a magnetic bias field.

  3. SOCMA study urges flexibility

    International Nuclear Information System (INIS)

    Kirschner, E.

    1993-01-01

    In implementing the 1990 Pollution Prevention Act, regulators and legislators should hold off on cookie-cutter, numerical goal-based requirements to allow for site and process specific programs, says a study sponsored by the Synthetic Organic Chemicals Manufacturers Association (SOCMA; Washington). Companies should have that flexibility to target their resources toward those activities that reduce pollution cost effectively, says SOCMA environmental quality committee chairman Art Gillen, who is also BASF director of environmental regulatory affairs. The study - conducted by Woodward-Clyde Consultants (Denver) - examines four batch and custom chemical manufacturing films. As in the Clean Air Act, the batch processing of SOCMA-member plants should be considered in new regulations, Gillen says. For example, the study found that most wastes are from shutdowns and cleanouts, and there are frequent charges in waste streams and raw materials. Those characteristics do not lend themselves to annual reduction goals. Also, specific goals could have a wide range of costs: measures to reduce stack air emissions run from $18/lb to $1,106/lb. SOCMA says it will present the study to Congress and the Environmental Protection Agency

  4. Integrated engineering increases flexibility

    International Nuclear Information System (INIS)

    Smith, Ray

    1991-01-01

    Integrated Engineering (IE) can be used to describe the best use of increasingly rare good engineering talent in an increasingly competive world. A number of organisations are now moving towards IE without any general agreement on a precise definition. The engineering division of British Nuclear Fuels (BNFL) is one such organisation. This feature covers the reasoning behind the decision, and our experience to date. BNFL engineering division is responsible primarily for the provision of major facilities on BNFL operational sites. This provision includes feasibility, front end and detailed design, procurement, installation and commissioning. Task force working has been used for some of the large projects. But the future workload is expected to comprise many more smaller projects. At the same time, equipment is becoming more complex and the need for mutual understanding and appreciation between disciplines is increasing. To meet this increasing need for flexibility, BNFL has decided to move to the matrix structure of project management and functional departments described in the article. (Author)

  5. Orbital preservation in a maxillectomy

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Katsuhiko; Nishikawa, Hitomi; Kumagai, Masahiko; Dosaka, Yoshihiro; Kuroda, Toru; Atago, Yoshihiro; Nishio, Masamichi [Sapporo National Hospital (Japan)

    1999-07-01

    In the past 9 years, 38 patients of the maxillary cancer were treated by a combination of radiation and surgery. Sixteen patients showed the orbital involvement as confirmed by a CT scan and/or MRI. An orbital excenteration was necessary in 6 patients, due mainly to deep intraorbital invasion, while in 10, the orbital contents were preserved despite the involvement of the orbital capsule. The local rate of the orbital region in the latter patients evaluated at 48 months after the initial surgery was 44%. For the treatment of the recurrence at the orbital capsule. The application of gold grain (Au{sup 198}) thus appeared to be a useful tool for further preserving the eye. (author)

  6. Orbital preservation in a maxillectomy

    International Nuclear Information System (INIS)

    Tanaka, Katsuhiko; Nishikawa, Hitomi; Kumagai, Masahiko; Dosaka, Yoshihiro; Kuroda, Toru; Atago, Yoshihiro; Nishio, Masamichi

    1999-01-01

    In the past 9 years, 38 patients of the maxillary cancer were treated by a combination of radiation and surgery. Sixteen patients showed the orbital involvement as confirmed by a CT scan and/or MRI. An orbital excenteration was necessary in 6 patients, due mainly to deep intraorbital invasion, while in 10, the orbital contents were preserved despite the involvement of the orbital capsule. The local rate of the orbital region in the latter patients evaluated at 48 months after the initial surgery was 44%. For the treatment of the recurrence at the orbital capsule. The application of gold grain (Au 198 ) thus appeared to be a useful tool for further preserving the eye. (author)

  7. INCORRECT PRESERVATION OF AMPUTATED DIGITS

    Directory of Open Access Journals (Sweden)

    Uroš Ahčan

    2004-09-01

    Full Text Available Background. A decision to replant is critically dependent on the condition of the amputated digit and the way it was preserved during transport. The most common error is exposing the amputated digit to very low temperatures. Preservation directly on ice, on cooling devices in portable refrigerators, or on top of packets of frozen meat often result in a frozen and therefore unusable body digit.Methods. An inquiry questionnaire on correct methods of preservation of amputated digits was conducted on a sample of 30 lay persons, 30 medical students, and 15 physicians.Three simulations of most frequently used methods of preservation of amputated digit were conducted (the correct method; directly on ice; on cooling devices of portable refrigerators. Environment temperature of the (simulated amputated digits stored was measured.In a retrospective study, hospital records of patients treated at the Clinical department of plastic surgery and burns in Ljubljana between 1998 and 2002 were examined. We determined the number of replantations performed, gender of the patients, their age, the mechanism of the injury, the success rate of the replantation, and the duration of hospitalisation. In five case described in detail, we present an inadequate treatment of the amputated digits.Results. The results of the questionnaire survey show that no less than 86.7% of lay person respondents would have treated the injuries in an incorrect way; same holds for 43.4% students of medicine, and 33.3% of practicing physicians.The temperature of the simulated amputated digit remained above 5°C throughout the simulated correct treatment. When preserved directly on ice on or coolant bodies, the temperature dropped below the freezing point and never climbed above 0°C throughout the duration of the simulation (150 minutes.Between years 1998 and 2002, Clinical department of plastic surgery and burns at the University clinical centre Ljubljana admitted 124 injured persons with

  8. Nuclear Knowledge Preservation in Croatia

    International Nuclear Information System (INIS)

    Pleslic, S.; Novosel, N.

    2006-01-01

    Since the International Atomic Energy Agency (IAEA, Vienna, Austria) was founded in 1957 as an autonomous intergovernmental organization, it was authorized for exchange of technical and scientific information on peaceful uses of atomic energy. 35 years ago the International Nuclear Information System (INIS) was established from IAEA as an international bibliographic database in the nuclear field and in nuclear related areas. INIS as an instrument for a comprehensive and systematic dissemination of all information and knowledge becomes a big technological and science information system with 134 Members (114 countries and 20 international organizations). In INIS Membership Arrangements all Members are responsible for the collection, selection, description of information and providing the Agency with the full text of each item of non-conventional literature. Participation of each Member is important because decentralized information management is an operational philosophy of INIS. During all these years status of nuclear power changed significantly in the world. Some developing countries started to develop nuclear power programme and some developed countries showed tendency to decrease use of nuclear power. Anyway, expert knowledge accumulated over decades and the achievements in the field of nuclear science and technology have to be preserved and later transferred to future generations. It became obvious that the INIS is practically a pioneer in the area of nuclear knowledge preservation with well defined goals of knowledge preservation: selection of the most valuable information to convey to the future, ensuring that it remains accessible, readable and understandable and management of technological change. Main components of knowledge preservation are: selection of information for preservation including evaluation and prioritisation by value, use and risk, information capture (purchasing, copy, digitise, web links), describing, classifying, store and access

  9. Preserved entropy and fragile magnetism.

    Science.gov (United States)

    Canfield, Paul C; Bud'ko, Sergey L

    2016-08-01

    A large swath of quantum critical and strongly correlated electron systems can be associated with the phenomena of preserved entropy and fragile magnetism. In this overview we present our thoughts and plans for the discovery and development of lanthanide and transition metal based, strongly correlated systems that are revealed by suppressed, fragile magnetism, quantum criticality, or grow out of preserved entropy. We will present and discuss current examples such as YbBiPt, YbAgGe, YbFe2Zn20, PrAg2In, BaFe2As2, CaFe2As2, LaCrSb3 and LaCrGe3 as part of our motivation and to provide illustrative examples.

  10. Preservation of food and radiation

    International Nuclear Information System (INIS)

    Kasamatsu, Tomomichi

    1975-01-01

    In the application of radiation to preservation of food, there are some methods; sterilization, elimination of noxious insects, prevention of germination and control of maturation. The former two utilize the lethal effect of radiation to the living things and the latter two utilize the injurious effect on the metabolism of the living things. At present, irradiation to potato is most widely permitted for the purpose of prevention of germination, and the irradiation with 15 Krad (maximum) is allowed to preserve potato for 8 months in Japan. In the other hand, a large quantity of doses, such as 4.5 to 5.6 Mrad, is necessary to sterilize completely for industrial use, degeneration of food component and high cost come into question. In addition, food is directly taken into the mouth of human being, therefore, wholesomeness, legal permission and determination of dose must be examined. (Tsukamoto, Y.)

  11. Food Preservation by Irradiation (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Urrows, Grace M.

    1968-01-01

    Up to 30% of food harvests are lost in some parts of the world because of animal pests and microorganisms. Nuclear techniques can help reduce and extend the shelf life of these foods. Around 55 countries now have food irradiation programs. The use of radiation is the most recent step in man's attempts to preserve some of his harvest for the lean part of the year.

  12. Technical Information/Website Preservation

    Science.gov (United States)

    PintoRey, Christian R.

    2010-01-01

    This document reviews the work of the author in NASA's Motivating Undergraduates in Science and Technology (MUST) internship. The intern worked on the Space Shuttles hydraulic systems (i.e., Auxiliary Power Units (APU's) and Hydraulic Pump Units (HPU's)), and website preservation of the hydraulic technology captured in websites relating to the coming.the Space Shuttle Retirement. Several figures and pictures show an overview of the orbiter's hydraulic systems

  13. New method of preserving food

    Energy Technology Data Exchange (ETDEWEB)

    Carrard, G. (Australian Atomic Energy Commission Research Establishment, Lucas Heights)

    1983-07-01

    The use of gamma radiation for food preservation is discussed. Investigations at the AAEC include: the eradication of fruit-fly larvae in oranges, tomatoes and avocadoes; treatment of shrimps; extending the shelf life of mushrooms and potatoes; treatment of imported beans to prevent germination; killing of bacterial spores with a combination of pressure and gamma radiation; and the treatment of beehives containing honey-bee larvae with foulbrood.

  14. New method of preserving food

    International Nuclear Information System (INIS)

    Carrard, G.

    1983-01-01

    The use of gamma radiation for food preservation is discussed. Investigations at the AAEC include: the eradication of fruit-fly larvae in oranges, tomatoes and avocadoes; treatment of shrimps; extending the shelf life of mushrooms and potatoes; treatment of imported beans to prevent germination; killing of bacterial spores with a combination of pressure and gamma radiation; and the treatment of beehives containing honey-bee larvae with foulbrood

  15. ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION

    OpenAIRE

    Guedes, AMM; Novello, D; Mendes, GMD; Cristianini, M

    2009-01-01

    ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION This literature review article had as objective to gather information about ultraviolet (UV) technology utilization on the food industry, its effects and potential application. Aspects as the origin, concept and applications of the technology on the equipment industry and running mechanisms were approached. The application of UV radiation on food decontamination is still little used due its low penetration, but it is known that it can be easily app...

  16. The ZEUS data preservation project

    International Nuclear Information System (INIS)

    Malka, Janusz; Wichmann, Katarzyna

    2012-01-01

    A project to allow long term access and physics analysis of ZEUS data (ZEUS data preservation) has been established in collaboration with the DESY-IT group. In the ZEUS approach the analysis model is based on the Common Ntuple project, under development since 2006. The real data and all presently available Monte Carlo samples are being preserved in a flat ROOT ntuple format. There is ongoing work to provide the ability to simulate new, additional Monte Carlo samples also in the future. The validation framework of such a scheme using virtualisation techniques is being explored. The goal is to validate the frozen ZEUS software against future changes in hardware and operating system. A cooperation between ZEUS, DESY-IT and the library was established for document digitisation and long-term preservation of collaboration web pages. Part of the ZEUS internal documentation has already been stored within the HEP documentation system INSPIRE. Existing digital documentation, needed to perform physics analysis also in the future, is being centralised and completed.

  17. Phase-preserved optical elevator.

    Science.gov (United States)

    Luo, Yuan; Zhang, Baile; Han, Tiancheng; Chen, Zhi; Duan, Yubo; Chu, Chia-Wei; Barbastathis, George; Qiu, Cheng Wei

    2013-03-25

    The unique superiority of transformation optics devices designed from coordinate transformation is their capability of recovering both ray trajectory and optical path length in light manipulation. However, very few experiments have been done so far to verify this dual-recovery property from viewpoints of both ray trajectory and optical path length simultaneously. The experimental difficulties arise from the fact that most previous optical transformation optics devices only work at the nano-scale; the lack of intercomparison between data from both optical path length and ray trajectory measurement in these experiments obscured the fact that the ray path was subject to a subwavelength lateral shift that was otherwise not easily perceivable and, instead, was pointed out theoretically [B. Zhang et al. Phys. Rev. Lett. 104, 233903, 2010]. Here, we use a simple macroscopic transformation optics device of phase-preserved optical elevator, which is a typical birefringent optical phenomenon that can virtually lift an optical image by a macroscopic distance, to demonstrate decisively the unique optical path length preservation property of transformation optics. The recovery of ray trajectory is first determined with no lateral shift in the reflected ray. The phase preservation is then verified with incoherent white-light interferometry without ambiguity and phase unwrapping.

  18. RASPA: molecular simulation software for adsorption and diffusion in flexible nanoporous materials

    NARCIS (Netherlands)

    Dubbeldam, D.; Calero, S.; Ellis, D.E.; Snurr, R.Q.

    2016-01-01

    A new software package, RASPA, for simulating adsorption and diffusion of molecules in flexible nanoporous materials is presented. The code implements the latest state-of-the-art algorithms for molecular dynamics and Monte Carlo (MC) in various ensembles including symplectic/measure-preserving

  19. Open Data and Data Analysis Preservation Services for LHC Experiments

    CERN Document Server

    Cowton, J; Fokianos, P; Rueda, L; Herterich, P; Kunčar, J; Šimko, T; Smith, T

    2015-01-01

    In this paper we present newly launched services for open data and for long-term preservation and reuse of high-energy-physics data analyses based on the digital library software Invenio. We track the ”data continuum” practices through several progressive data analysis phases up to the final publication. The aim is to capture for subsequent generations all digital assets and associated knowledge inherent in the data analysis process, and to make a subset available rapidly to the public. The ultimate goal of the analysis preservation platform is to capture enough information about the processing steps in order to facilitate reproduction of an analysis even many years after its initial publication, permitting to extend the impact of preserved analyses through future revalidation and recasting services. A related ”open data” service was launched for the benefit of the general public.

  20. Proteome stability analysis of snap frozen, RNAlater preserved, and formalin-fixed paraffin-embedded human colon mucosal biopsies

    DEFF Research Database (Denmark)

    Bennike, Tue Bjerg; Kastaniegaard, Kenneth; Padurariu, Simona

    2016-01-01

    Large repositories of well characterized RNAlater preserved samples and formalin-fixed, paraffin-embedded samples have been generated worldwide. However, the impact on the proteome of the preservation methods remain poorly described. Therefore, we analyzed the impact on the proteome of preserving...... throughput gel free quantitative proteomics. The MS proteomics data have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PRIDE: PXD002029....

  1. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... fertility preservation is important. These key points can help start the conversation: Cancer and cancer treatment may ... several resources listed on the reverse that can help you locate a fertility preservation specialist to discuss ...

  2. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... fertility preservation center closest to you Visit the Pediatric Oncofertility Research Foundation Visit the Patient Navigator Website ... Ginsberg JP. New advances in fertility preservation for pediatric cancer patients. Curr Opin Pediatr. 2010;23:9- ...

  3. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Cancer Ask Your Doctor Information for Patients Many adult survivors of childhood cancer feel fertility preservation and ... Fertility preservation and adolescent cancer patients: lessons from adult survivors of childhood cancer and their parents. Cancer ...

  4. 76 FR 60754 - Preserving the Open Internet

    Science.gov (United States)

    2011-09-30

    ...-201] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final rule..., 2011, a document establishing rules to preserve the open Internet. Inadvertently the wrong paragraph... alleging violations of the open Internet rules. Federal Communications Commission. Matt Warner, Attorney...

  5. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... available and having your child see a reproductive specialist in a timely manner can improve their future ... Can you refer us to a fertility preservation specialist to discuss my child’s options further? Fertility Preservation - ...

  6. A Holistic Approach to Bit Preservation

    DEFF Research Database (Denmark)

    Zierau, Eld Maj-Britt Olmütz

    2011-01-01

    This thesis presents three main results for a holistic approach to bit preservation, where the ultimate goal is to find the optimal bit preservation strategy for specific digital material that must be digitally preserved. Digital material consists of sequences of bits, where a bit is a binary digit...... which can have the value 0 or 1. Bit preservation must ensure that the bits remain intact and readable in the future, but bit preservation is not concerned with how bits can be interpreted as e.g. an image. A holistic approach to bit preservation includes aspects that influence the final choice of a bit...... a holistic approach and include aspects of digital representation, confidentiality, availability, bit safety and costs when defining requirements for the bit preservation. Analysis of such requirements and choice of the final bit preservation solution can be supported by the three main results presented...

  7. Prolonged platelet preservation by transient metabolic suppression

    NARCIS (Netherlands)

    Badlou, Bahram Alamdary

    2006-01-01

    Introduction: Different clinical studies have shown that transfusion of stored platelets results in better haemostasis in patients with thrombocytopenia with and without a platelet function defect. Objectives: Current preservation procedures aim to optimally preserve the metabolic status of

  8. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... JP, Kolon TF. Fertility Preservation in Children and Adolescents With Cancer . Urology. 2016;91:190-6. Loren ... 10. Nieman CL, et al. Fertility preservation and adolescent cancer patients: lessons from adult survivors of childhood ...

  9. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... be fertility preservation options available and having your child see a reproductive specialist in a timely manner ... there are options for preserving fertility in your child diagnosed with cancer. You may be focused on ...

  10. Aggregating and Disaggregating Flexibility Objects

    DEFF Research Database (Denmark)

    Siksnys, Laurynas; Valsomatzis, Emmanouil; Hose, Katja

    2015-01-01

    In many scientific and commercial domains we encounter flexibility objects, i.e., objects with explicit flexibilities in a time and an amount dimension (e.g., energy or product amount). Applications of flexibility objects require novel and efficient techniques capable of handling large amounts...... and aiming at energy balancing during aggregation. In more detail, this paper considers the complete life cycle of flex-objects: aggregation, disaggregation, associated requirements, efficient incremental computation, and balance aggregation techniques. Extensive experiments based on real-world data from...

  11. Flexible riser integrity management: areas of concern and applications

    Energy Technology Data Exchange (ETDEWEB)

    Podskarbi, Mateusz [Schlumberger Servicos de Petroleo Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Flexible risers are key enables for both deep water and shallow water offshore production developments. Number of flexible risers installed worldwide is into several thousands with two main concentration areas - offshore Brazil and North Sea. Flexible risers are subject to significant loads including environmental impacts, vessel motions, internal temperature and pressure as well as substantial installation loads. Excessive loads of one type or a combination of various types of loads can cause damage to the flexible that can lead to a catastrophic failure. Industry observed number of failures increasing in recent years. Operators and manufacturing companies are taking various steps to address this issue. One of possible approaches is to use monitoring instrumentation to measure riser response and integrity in real time. This paper reviews various types of flexible riser damage mechanisms caused by impact damage, corrosion, excessive pressure, armor wire rupture, compromising flexible riser minimum bend radius, excessive fatigue loading, etc. Failure mechanisms are reviewed with particular focus on the consequences that it causes in terms of risk to the infrastructure and detectable changes. Further part of the paper is focused on monitoring techniques employed and available to detect particular types of failure mechanisms. Systematic review of the monitoring techniques is provided with specific attention given to ability of these techniques to provide early warnings of riser failure. Evaluation of monitoring techniques versus modes of operation and failure mechanism is key to selecting appropriate system that ensures effectiveness of the integrity management program. (author)

  12. Flexible joints in structural and multibody dynamics

    Directory of Open Access Journals (Sweden)

    O. A. Bauchau

    2013-02-01

    Full Text Available Flexible joints, sometimes called bushing elements or force elements, are found in all structural and multibody dynamics codes. In their simplest form, flexible joints simply consist of sets of three linear and three torsional springs placed between two nodes of the model. For infinitesimal deformations, the selection of the lumped spring constants is an easy task, which can be based on a numerical simulation of the joint or on experimental measurements. If the joint undergoes finite deformations, identification of its stiffness characteristics is not so simple, specially if the joint is itself a complex system. When finite deformations occur, the definition of deformation measures becomes a critical issue. This paper proposes a family of tensorial deformation measures suitable for elastic bodies of finite dimension. These families are generated by two parameters that can be used to modify the constitutive behavior of the joint, while maintaining the tensorial nature of the deformation measures. Numerical results demonstrate the objectivity of the deformations measures, a feature that is not shared by the deformations measures presently used in the literature. The impact of the choice of the two parameters on the constitutive behavior of the flexible joint is also investigated.

  13. Preservative loss from silicone tubing during filling processes.

    Science.gov (United States)

    Saller, Verena; Matilainen, Julia; Rothkopf, Christian; Serafin, Daniel; Bechtold-Peters, Karoline; Mahler, Hanns-Christian; Friess, Wolfgang

    2017-03-01

    Significant loss of preservative was observed during filling of drug products during filling line stops. This study evaluated the losses of three commonly used preservatives in protein drugs, i.e. benzyl alcohol, phenol, and m-cresol. Concentration losses during static incubation were quantified and interpreted with regard to the potential driving forces for the underlying sorption, diffusion, and desorption steps. Partitioning from the solution into the silicone polymer was identified as the most decisive parameter for the extent of preservative loss. Additionally, the influence of tubing inner diameter, starting concentration as well as silicone tubing type was evaluated. Theoretical calculations assuming equilibrium between solution and tubing inner surface and one-directional diffusion following Fick's first law were used to approximate experimental data. Since significant losses were found already after few minutes, adequate measures must be taken to avoid deviations during filling of preservative-containing protein solutions that may impact product quality or antimicrobial efficacy. As a possible alternative to the highly permeable silicone tubing, a specific make of fluoropolymer tubing was identified being suitable for peristaltic pumps and not showing any preservative losses. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Preservation management for libraries, archives and museums

    CERN Document Server

    Gorman, G E

    2006-01-01

    Memory institutions such as libraries, archives, galleries and museums all share pressing concerns about preserving heritage. This book charts the diversity of preservation management in the contemporary information landscape, and offers guidance on preservation methods for the sustainability of collections from a range of international experts.

  15. Orthogonality preserving infinite dimensional quadratic stochastic operators

    International Nuclear Information System (INIS)

    Akın, Hasan; Mukhamedov, Farrukh

    2015-01-01

    In the present paper, we consider a notion of orthogonal preserving nonlinear operators. We introduce π-Volterra quadratic operators finite and infinite dimensional settings. It is proved that any orthogonal preserving quadratic operator on finite dimensional simplex is π-Volterra quadratic operator. In infinite dimensional setting, we describe all π-Volterra operators in terms orthogonal preserving operators

  16. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... website. Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open ... Diagnosed with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation ...

  17. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu ... with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for ...

  18. 32 CFR 174.18 - Historic preservation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Historic preservation. 174.18 Section 174.18... Historic preservation. (a) The transfer, lease, or sale of National Register-eligible historic property to... the regulations implementing the National Historic Preservation Act (36 CFR 800.5(a)(2)(vii)). One way...

  19. 76 FR 74721 - Preserving the Open Internet

    Science.gov (United States)

    2011-12-01

    ...; Report No. 2936] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final... for broadband service to preserve and reinforce Internet freedom and openness. DATES: Oppositions to... applicability. Subject: In the Matter of Preserving the Open Internet, Broadband Industry Practices, published...

  20. Comprehensive preserving technique for Chinese chestnut storage

    International Nuclear Information System (INIS)

    Chen Yuntang; Yang Baoan; Zhang Jianwei; Li Qiufang

    2003-01-01

    Chinese chestnut can be preserved for a long time by using a comprehensive preserving technique, which consists of casing, irradiating, treating with preserving agent and controlling environment conditions. The shelftime of the treated chestnuts reaches 11 months keeping no insects, no germination and good quality for eating with the good fruit ratio of 97.5% and water losing ratio of 3.8%

  1. A holistic approach to bit preservation

    DEFF Research Database (Denmark)

    Zierau, Eld

    2012-01-01

    Purpose: The purpose of this paper is to point out the importance of taking a holistic approach to bit preservation when setting out to find an optimal bit preservation solution for specific digital materials. In the last decade there has been an increasing awareness that bit preservation, which ...

  2. Quantification of arbuscular mycorrhizal fungal DNA in roots: how important is material preservation?

    Czech Academy of Sciences Publication Activity Database

    Janoušková, Martina; Püschel, David; Hujslová, M.; Slavíková, R.; Jansa, J.

    2015-01-01

    Roč. 25, č. 3 (2015), s. 205-214 ISSN 0940-6360 Institutional support: RVO:67985939 Keywords : arbuscular mycorrhiza * quantitative real-time PCR * sample preservation Subject RIV: EF - Botanics Impact factor: 3.252, year: 2015

  3. Flexible Thermoelectric Generators on Silicon Fabric

    KAUST Repository

    Sevilla, Galo T.

    2012-01-01

    In this work, the development of a Thermoelectric Generator on Flexible Silicon Fabric is explored to extend silicon electronics for flexible platforms. Low cost, easily deployable plastic based flexible electronics are of great interest for smart

  4. Organizational flexibility as a strategic option: fostering dynamic capabilities of hospitals.

    Science.gov (United States)

    Dias, Casimiro; Escoval, Ana

    2014-01-01

    The main purpose of this article is to examine how the internal and external dimensions of organizational flexibility impact hospital performance. Results reveal that matching internal and external flexibilities contributes to the development of capabilities to adopt new strategic options. Such interactions have a significant impact in terms of hospital performance. A cluster of dynamic hospitals, which is characterised by high levels of both internal and external flexibilities, (instead of that have high levels of both internal and external flexibilities) was found to have the double level of performance compared with other clusters. The implications for research and managerial practice are discussed. Copyright © 2014 Longwoods Publishing.

  5. Flexibility of trunnion piping elbows

    International Nuclear Information System (INIS)

    Lewis, G.D.; Chao, Y.J.

    1987-01-01

    Flexibility factors and stress indices for piping component such as straight pipe, elbows, butt-welding tees, branch connections, and butt-welding reducers are contained in the code, but many of the less common piping components, like the trunnion elbow, do not have flexibility factors or stress indices defined. The purpose of this paper is to identify the in-plane and out-of-plane flexibility factors in accordance with code procedures for welded trunnions attached to the tangent centerlines of long radius elbows. This work utilized the finite element method as applicable to plates and shells for calculating the relative rotations of the trunnion elbow-ends for in-plane and out-of-plane elbow moment loadings. These rotations are used to derive the corresponding in-plane and out-of-plane flexibility factors. (orig./GL)

  6. Distributed flexibility in inertial swimmers

    Science.gov (United States)

    Floryan, Daniel; Rowley, Clarence W.; Smits, Alexander J.

    2017-11-01

    To achieve fast and efficient swimming, the flexibility of the propulsive surfaces is an important feature. To better understand the effects of distributed flexibility (either through inhomogeneous material properties, varying geometry, or both) we consider the coupled solid and fluid mechanics of the problem. Here, we develop a simplified model of a flexible swimmer, using Euler-Bernoulli theory to describe the solid, Theodorsen's theory to describe the fluid, and a Blasius boundary layer to incorporate viscous effects. Our primary aims are to understand how distributed flexibility affects the thrust production and efficiency of a swimmer with imposed motion at its leading edge. In particular, we examine the modal shapes of the swimmer to gain physical insight into the observed trends. Supported under ONR MURI Grant N00014-14-1-0533, Program Manager Robert Brizzolara.

  7. Optics Flexibility and Dispersion Matching at Injection into the LHC

    CERN Document Server

    Koschik, A; Goddard, B; Kadi, Y; Kain, V; Mertens, V; Risselada, Thys

    2006-01-01

    The LHC requires very precise matching of transfer line and LHC optics to minimise emittance blow-up and tail repopulation at injection. The recent addition of a comprehensive transfer line collimation system to improve the protection against beam loss has created additional matching constraints and consumed a significant part of the flexibility contained in the initial optics design of the transfer lines. Optical errors, different injection configurations and possible future optics changes require however to preserve a certain tuning range. Here we present methods of tuning optics parameters at the injection point by using orbit correctors in the main ring, with the emphasis on dispersion matching. The benefit of alternative measures to enhance the flexibility is briefly discussed.

  8. Flexible semi-transparent organic spin valve based on bathocuproine

    International Nuclear Information System (INIS)

    Sun, Xiangnan; Bedoya-Pinto, Amilcar; Llopis, Roger; Casanova, Fèlix; Hueso, Luis E.

    2014-01-01

    Organic semiconductors are attractive materials for advanced spintronic applications due to their long spin lifetimes and, simultaneously, their mechanical flexibility. With the aim of combining these advantages in a single device, we report on the fabrication and properties of a mechanically flexible bathocuproine-based spin valve. This organic spin device shows great stability on both electrical and magneto-transport properties upon mechanical bending at different radius (up to r = 5 mm), while featuring long-lasting endurance (on bending over 50 times). The room-temperature magnetoresistance ratio reaches up to 3.5%, and is notably preserved under air atmosphere. The observation of spin transport at room-temperature, combined with the outstanding mechanical properties and air stability, highlights the potential of bathocuproine-based spin devices towards applications.

  9. Radiation preservation of cooked foods

    International Nuclear Information System (INIS)

    Aurangzeb; Bibi, N.; Badshah, A.; Khan, I.

    1989-01-01

    The preservation of irradiated cooked food has been explained in this report under vacuum conditions. The samples were irradiated at dose levels of 7.5 and 10.0 LGy. Measurement of fungal count was carried immediately after irradiation and after each 15 days of storage life upto 60 days of time interval. The samples were evaluated organolepticaly as well. It has been observed that no significance difference was observed among samples of irradiated and vacuum packed controls during storage for 45 days. (A.B.)

  10. Polarization preservation in the AGS

    International Nuclear Information System (INIS)

    Ratner, L.G.

    1983-01-01

    The successful operation of a high energy polarized beam at the Argonne Zero Gradient Synchrotron (ZGS) with the concommitant development of depolarizing resonance correction techniques has led to the present project of commissioning such a beam at the Brookhaven Alternating Gradient Synchrotron (AGS). A description of the project was presented at the 1981 National Accelerator Conference. I would like to now present a more detailed description of how we plan to preserve the polarization during acceleration, and to present our game plan for tuning through some 50 resonances and reaching our goal of a 26 GeV polarized proton beam with greater than 60% polarization

  11. Tensor Train Neighborhood Preserving Embedding

    Science.gov (United States)

    Wang, Wenqi; Aggarwal, Vaneet; Aeron, Shuchin

    2018-05-01

    In this paper, we propose a Tensor Train Neighborhood Preserving Embedding (TTNPE) to embed multi-dimensional tensor data into low dimensional tensor subspace. Novel approaches to solve the optimization problem in TTNPE are proposed. For this embedding, we evaluate novel trade-off gain among classification, computation, and dimensionality reduction (storage) for supervised learning. It is shown that compared to the state-of-the-arts tensor embedding methods, TTNPE achieves superior trade-off in classification, computation, and dimensionality reduction in MNIST handwritten digits and Weizmann face datasets.

  12. Determinants of flexible work arrangements

    OpenAIRE

    Sarbu, Miruna

    2014-01-01

    Flexible work arrangements such as allowing employees to work at home are used in firms, especially since information and communication technologies have become so widespread. Using individual-level data from 10,884 German employees, this paper analyses the determinants of working at home as a form of flexible work arrangements. The analysis is based on descriptive analyses and a discrete choice model using a probit estimation approach. The results reveal that men have a higher...

  13. Flexible packaging for PV modules

    Science.gov (United States)

    Dhere, Neelkanth G.

    2008-08-01

    Economic, flexible packages that provide needed level of protection to organic and some other PV cells over >25-years have not yet been developed. However, flexible packaging is essential in niche large-scale applications. Typical configuration used in flexible photovoltaic (PV) module packaging is transparent frontsheet/encapsulant/PV cells/flexible substrate. Besides flexibility of various components, the solder bonds should also be flexible and resistant to fatigue due to cyclic loading. Flexible front sheets should provide optical transparency, mechanical protection, scratch resistance, dielectric isolation, water resistance, UV stability and adhesion to encapsulant. Examples are Tefzel, Tedlar and Silicone. Dirt can get embedded in soft layers such as silicone and obscure light. Water vapor transmittance rate (WVTR) of polymer films used in the food packaging industry as moisture barriers are ~0.05 g/(m2.day) under ambient conditions. In comparison, light emitting diodes employ packaging components that have WVTR of ~10-6 g/(m2.day). WVTR of polymer sheets can be improved by coating them with dense inorganic/organic multilayers. Ethylene vinyl acetate, an amorphous copolymer used predominantly by the PV industry has very high O2 and H2O diffusivity. Quaternary carbon chains (such as acetate) in a polymer lead to cleavage and loss of adhesional strength at relatively low exposures. Reactivity of PV module components increases in presence of O2 and H2O. Adhesional strength degrades due to the breakdown of structure of polymer by reactive, free radicals formed by high-energy radiation. Free radical formation in polymers is reduced when the aromatic rings are attached at regular intervals. This paper will review flexible packaging for PV modules.

  14. Flexible forms of working hours

    OpenAIRE

    Knapp, Viktor

    2017-01-01

    66 Abstract - Flexible forms of working hours This diploma thesis deals with the flexible forms of working hours and its goal is to describe this issue in intelligible and comprehensive way. It is being very interesting and current theme which is to a great extent not subject to direct legal regulations and provides its contracting parties with a big amount of freedom of contract. This fact assists in bigger flexibilization of labour market and represents a significant instrument in the fight...

  15. Developmental constraints on behavioural flexibility.

    Science.gov (United States)

    Holekamp, Kay E; Swanson, Eli M; Van Meter, Page E

    2013-05-19

    We suggest that variation in mammalian behavioural flexibility not accounted for by current socioecological models may be explained in part by developmental constraints. From our own work, we provide examples of constraints affecting variation in behavioural flexibility, not only among individuals, but also among species and higher taxonomic units. We first implicate organizational maternal effects of androgens in shaping individual differences in aggressive behaviour emitted by female spotted hyaenas throughout the lifespan. We then compare carnivores and primates with respect to their locomotor and craniofacial adaptations. We inquire whether antagonistic selection pressures on the skull might impose differential functional constraints on evolvability of skulls and brains in these two orders, thus ultimately affecting behavioural flexibility in each group. We suggest that, even when carnivores and primates would theoretically benefit from the same adaptations with respect to behavioural flexibility, carnivores may nevertheless exhibit less behavioural flexibility than primates because of constraints imposed by past adaptations in the morphology of the limbs and skull. Phylogenetic analysis consistent with this idea suggests greater evolutionary lability in relative brain size within families of primates than carnivores. Thus, consideration of developmental constraints may help elucidate variation in mammalian behavioural flexibility.

  16. Modelling the Costs of Preserving Digital Assets

    DEFF Research Database (Denmark)

    Kejser, Ulla Bøgvad; Nielsen, Anders Bo; Thirifays, Alex

    2012-01-01

    Information is increasingly being produced in digital form, and some of it must be preserved for the longterm. Digital preservation includes a series of actively managed activities that require on-going funding. To obtain sufficient resources, there is a need for assessing the costs...... and the benefits accrued by preserving the assets. Cost data is also needed for optimizing activities and comparing the costs of different preservation alternatives. The purpose of this study is to analyse generic requirements for modelling the cost of preserving digital assets. The analysis was based...

  17. Impacts

    NARCIS (Netherlands)

    Hellmuth, M.; Kabat, P.

    2003-01-01

    Even without the impacts of climate change, water managers face prodigious challenges in meeting sustainable development goals. Growing populations need affordable food, water and energy. Industrial development demands a growing share of water resources and contaminates those same resources with its

  18. OAIS and Distributed Digital Preservation in Practice

    DEFF Research Database (Denmark)

    Zierau, Eld

    The aim of the paper is to illustrate how the distributed aspects of digital preservation can be aligned in practice, with the concepts and principles of the Open Archival Information System (OAIS) Reference Model. There has been a growing awareness within the digital preservation community...... of the need for cooperation between organizations to address digital preservation requirements. One common example is that replicas of preservation copies of digital objects need to be independently preserved (e.g., stored, managed, monitored, documented) to ensure that at least one correct replica...... will survive for as long as needed. Such independence can be achieved through distributed digital preservation that relies upon specific agreements between participating and contributing organizations. The OAIS Reference Model does not address the challenges of distributed digital preservation in detail...

  19. Evaluation of a flexible bronchoscope prototype designed for bronchoscopy during mechanical ventilation: a proof-of-concept study.

    Science.gov (United States)

    Nay, M-A; Auvet, A; Mankikian, J; Herve, V; Dequin, P-F; Guillon, A

    2017-06-01

    Bronchoscopy during mechanical ventilation of patients' lungs significantly affects ventilation because of partial obstruction of the tracheal tube, and may thus be omitted in the most severely ill patients. It has not previously been possible to reduce the external diameter of the bronchoscope without reducing the diameter of the suction channel, thus reducing the suctioning capacity of the device. We believed that a better-designed bronchoscope could improve the safety of bronchoscopy in patients whose lungs were ventilated. We designed a flexible bronchoscope prototype with a drumstick-shaped head consisting of a long, thin proximal portion; a short and large distal portion for camera docking; and a large suction channel throughout the length of the device. The aims of our study were to test the impact of our prototype on mechanical ventilation when inserted into the tracheal tube, and to assess suctioning capacity. We first tested the efficiency of the suction channel, and demonstrated that the suction flow of the prototype was similar to that of conventional adult bronchoscopes. We next evaluated the consequences of bronchoscopy when using the prototype on minute ventilation and intrathoracic pressures during mechanical ventilation: firstly, in vitro using a breathing simulator; and secondly, in vivo using a porcine model of pulmonary ventilation. The insertion of adult bronchoscopes into the tracheal tube immediately impaired the protective ventilation strategy employed, whereas the prototype preserved it. For the first time, we have developed an innovative flexible bronchoscope designed for bronchoscopy during invasive mechanical ventilation, that both preserved the protective ventilation strategy, and enabled efficient suction flow. © 2017 The Association of Anaesthetists of Great Britain and Ireland.

  20. Preserving information in neural transmission.

    Science.gov (United States)

    Sincich, Lawrence C; Horton, Jonathan C; Sharpee, Tatyana O

    2009-05-13

    Along most neural pathways, the spike trains transmitted from one neuron to the next are altered. In the process, neurons can either achieve a more efficient stimulus representation, or extract some biologically important stimulus parameter, or succeed at both. We recorded the inputs from single retinal ganglion cells and the outputs from connected lateral geniculate neurons in the macaque to examine how visual signals are relayed from retina to cortex. We found that geniculate neurons re-encoded multiple temporal stimulus features to yield output spikes that carried more information about stimuli than was available in each input spike. The coding transformation of some relay neurons occurred with no decrement in information rate, despite output spike rates that averaged half the input spike rates. This preservation of transmitted information was achieved by the short-term summation of inputs that geniculate neurons require to spike. A reduced model of the retinal and geniculate visual responses, based on two stimulus features and their associated nonlinearities, could account for >85% of the total information available in the spike trains and the preserved information transmission. These results apply to neurons operating on a single time-varying input, suggesting that synaptic temporal integration can alter the temporal receptive field properties to create a more efficient representation of visual signals in the thalamus than the retina.

  1. Towards Interoperable Preservation Repositories: TIPR

    Directory of Open Access Journals (Sweden)

    Priscilla Caplan

    2010-07-01

    Full Text Available Towards Interoperable Preservation Repositories (TIPR is a project funded by the Institute of Museum and Library Services to create and test a Repository eXchange Package (RXP. The package will make it possible to transfer complex digital objects between dissimilar preservation repositories.  For reasons of redundancy, succession planning and software migration, repositories must be able to exchange copies of archival information packages with each other. Every different repository application, however, describes and structures its archival packages differently. Therefore each system produces dissemination packages that are rarely understandable or usable as submission packages by other repositories. The RXP is an answer to that mismatch. Other solutions for transferring packages between repositories focus either on transfers between repositories of the same type, such as DSpace-to-DSpace transfers, or on processes that rely on central translation services.  Rather than build translators between many dissimilar repository types, the TIPR project has defined a standards-based package of metadata files that can act as an intermediary information package, the RXP, a lingua franca all repositories can read and write.

  2. Brief concept of hip preservation

    Directory of Open Access Journals (Sweden)

    Sanjeev S. Madan

    2017-12-01

    Full Text Available Restoration of the anatomy of the hip joint and biomechanics across it, carry the immense importance to prevent future osteoarthritis of the joint. The aim of this review is to provide the brief concept of the methods to preserve the hip, especially in young adults. Attempts to preserve the hips start with the intense preoperative planning of the corrective procedure. Different parameters regarding the femur and acetabulum in all 3 dimensions need to be assessed. Especially, measurement of the anteversion of the femur and acetabulum is a significant step to avoid osteoarthritis. In addition, the suprapelvic and infrapelvic (spine and lower limb lengths alignment needs to be considered in the planning. Correction of the femoral side of the hip needs the understanding of the blood supply of the proximal femur which carries the risk of avascular necrosis more so with intracapsular osteotomies. Acetabular reorientation, to re-distribute the forces over the weight bearing part, can be carried out with re-directional osteotomy such as periacetabular osteotomy. It needs the understanding of the acetabular anatomy and the force distribution in it. To conclude, correction of both femoral and acetabular side parameters need to be considered in decision making depending on the alterations due to various etiologies causing the hip disorders.

  3. Distributed privacy preserving data collection

    KAUST Repository

    Xue, Mingqiang

    2011-01-01

    We study the distributed privacy preserving data collection problem: an untrusted data collector (e.g., a medical research institute) wishes to collect data (e.g., medical records) from a group of respondents (e.g., patients). Each respondent owns a multi-attributed record which contains both non-sensitive (e.g., quasi-identifiers) and sensitive information (e.g., a particular disease), and submits it to the data collector. Assuming T is the table formed by all the respondent data records, we say that the data collection process is privacy preserving if it allows the data collector to obtain a k-anonymized or l-diversified version of T without revealing the original records to the adversary. We propose a distributed data collection protocol that outputs an anonymized table by generalization of quasi-identifier attributes. The protocol employs cryptographic techniques such as homomorphic encryption, private information retrieval and secure multiparty computation to ensure the privacy goal in the process of data collection. Meanwhile, the protocol is designed to leak limited but non-critical information to achieve practicability and efficiency. Experiments show that the utility of the anonymized table derived by our protocol is in par with the utility achieved by traditional anonymization techniques. © 2011 Springer-Verlag.

  4. Is my network module preserved and reproducible?

    Directory of Open Access Journals (Sweden)

    Peter Langfelder

    2011-01-01

    Full Text Available In many applications, one is interested in determining which of the properties of a network module change across conditions. For example, to validate the existence of a module, it is desirable to show that it is reproducible (or preserved in an independent test network. Here we study several types of network preservation statistics that do not require a module assignment in the test network. We distinguish network preservation statistics by the type of the underlying network. Some preservation statistics are defined for a general network (defined by an adjacency matrix while others are only defined for a correlation network (constructed on the basis of pairwise correlations between numeric variables. Our applications show that the correlation structure facilitates the definition of particularly powerful module preservation statistics. We illustrate that evaluating module preservation is in general different from evaluating cluster preservation. We find that it is advantageous to aggregate multiple preservation statistics into summary preservation statistics. We illustrate the use of these methods in six gene co-expression network applications including 1 preservation of cholesterol biosynthesis pathway in mouse tissues, 2 comparison of human and chimpanzee brain networks, 3 preservation of selected KEGG pathways between human and chimpanzee brain networks, 4 sex differences in human cortical networks, 5 sex differences in mouse liver networks. While we find no evidence for sex specific modules in human cortical networks, we find that several human cortical modules are less preserved in chimpanzees. In particular, apoptosis genes are differentially co-expressed between humans and chimpanzees. Our simulation studies and applications show that module preservation statistics are useful for studying differences between the modular structure of networks. Data, R software and accompanying tutorials can be downloaded from the following webpage: http

  5. IMPACTS !

    CERN Multimedia

    2008-01-01

    (Photo courtesy of Don Davis / NASA)The University of Geneva (UNIGE) and the Ecole Polytechnique Fédérale of Lausanne (EPFL) are organising the 4th series of public lectures on astronomy, on the theme of "Impacts". The schedule is as follows: Il y a 100 ans : une explosion dans la Tunguska – Dr. Frédéric COURBIN, EPFL Les impacts sur Terre – Prof. Didier Queloz, UNIGE La fin des dinosaures – Dr. Stéphane Paltani, UNIGE Wednesday 7 May 2008, from 7.00 p.m. to 9.00 p.m. Auditoire CO1, EPFL, Ecublens Thursday 08 May 2008, from 7.00 p.m. to 9.00 p.m. Auditoire Rouiller, Uni-Dufour, Genève All 3 lectures will be givent each evening! Admission free Information: 022 379 22 00

  6. Additive preservers of the ascent, descent and related subsets

    Czech Academy of Sciences Publication Activity Database

    Mbekhta, M.; Müller, Vladimír; Oudghiri, M.

    2014-01-01

    Roč. 71, č. 1 (2014), s. 63-83 ISSN 0379-4024 R&D Projects: GA ČR GA201/09/0473; GA AV ČR IAA100190903 Institutional support: RVO:67985840 Keywords : additive preservers * ascent * descent Subject RIV: BA - General Mathematics Impact factor: 0.550, year: 2014 http://www.mathjournals.org/jot/2014-071-001/2014-071-001-004.html

  7. Paraconsistency properties in degree-preserving fuzzy logics

    Czech Academy of Sciences Publication Activity Database

    Ertola, R.; Esteva, F.; Flaminio, T.; Godo, L.; Noguera, Carles

    2015-01-01

    Roč. 19, č. 3 (2015), s. 531-546 ISSN 1432-7643 R&D Projects: GA ČR GAP202/10/1826 Institutional support: RVO:67985556 Keywords : Mathematical fuzzy logic * degree-preserving fuzzy logics * paraconsistent logics * logics of formal inconsistency Subject RIV: BA - General Mathematics Impact factor: 1.630, year: 2015 http://library.utia.cas.cz/separaty/2016/MTR/noguera-0469166.pdf

  8. Proteome stability analysis of snap frozen, RNAlater preserved, and formalin-fixed paraffin-embedded human colon mucosal biopsies

    DEFF Research Database (Denmark)

    Bjerg Bennike, Tue; Kastaniegaard, Kenneth; Padurariu, Simona

    2016-01-01

    Large repositories of well characterized RNAlater preserved samples and formalin-fixed, paraffin-embedded samples have been generated worldwide. However, the impact on the proteome of the preservation methods remain poorly described. Therefore, we analyzed the impact on the proteome of preserving...... samples in RNAlater, and by formalin-fixation, paraffin-embedding on human soft tissue, using directly frozen samples as a control ("Comparing the proteome of snap frozen, RNAlater preserved, and formalin-fixed paraffin-embedded human tissue samples" [1]). We here report the data from the analysis...

  9. Organizational Learning, Strategic Flexibility and Business Model Innovation: An Empirical Research Based on Logistics Enterprises

    Science.gov (United States)

    Bao, Yaodong; Cheng, Lin; Zhang, Jian

    Using the data of 237 Jiangsu logistics firms, this paper empirically studies the relationship among organizational learning capability, business model innovation, strategic flexibility. The results show as follows; organizational learning capability has positive impacts on business model innovation performance; strategic flexibility plays mediating roles on the relationship between organizational learning capability and business model innovation; interaction among strategic flexibility, explorative learning and exploitative learning play significant roles in radical business model innovation and incremental business model innovation.

  10. Flexible working policies and environments in UK Local Authorities: current practice

    OpenAIRE

    Price, Ilfryn

    2001-01-01

    The research surveys the uptake of 'modern' or flexible working practices in UK Local Authorities, especially as it impacts on property and office accommodation.\\ud Nearly all permit flexible starting and finishing times for as many employees as is practical while forms of accredited hours working for at least some appropriate employees are policy in a majority. Flexible practices with property and ICT implications, working from home without a dedicated work station, formal policies, 'hot' de...

  11. Need of Reactor Dosimetry Preservation

    International Nuclear Information System (INIS)

    Ilieva, Krassimira

    2011-01-01

    The nuclear safety requirements and philosophy have changed by the development of new nuclear systems and this imposes special research and development activity. Reactor dosimetry which is applied for determination of neutron field parameters and neutron flux responses in different regions of the reactor system plays an important role in determining of radiation exposure on reactor system elements as reactor vessel, internals, shielding; dose determination for material damage study; for conditioning of irradiation; dose determination for medicine and industry application; induced activity determination for decommissioning purposes. The management of nuclear knowledge has emerged as a growing challenge in recent years. The need to preserve and transfer nuclear knowledge is compounded by recent trends such as ageing of the nuclear workforce, declining student numbers in nuclear related fields, and the threat of losing accumulated nuclear knowledge. (author)

  12. Correlation-Preserving Photo Collage.

    Science.gov (United States)

    Liu, Lingjie; Zhang, Hongjie; Jing, Guangmei; Guo, Yanwen; Chen, Zhonggui; Wang, Wenping

    2017-05-12

    A new method is presented for producing photo collages that preserve content correlation of photos. We use deep learning techniques to find correlation among given photos to facilitate their embedding on the canvas, and develop an efficient combinatorial optimization technique to make correlated photos stay close to each other. To make efficient use of canvas space, our method first extracts salient regions of photos and packs only these salient regions. We allow the salient regions to have arbitrary shapes, therefore yielding informative, yet more compact collages than by other similar collage methods based on salient regions. We present extensive experimental results, user study results, and comparisons against the state-of-the-art methods to show the superiority of our method.

  13. Privacy-Preserving Trajectory Collection

    DEFF Research Database (Denmark)

    Gidofalvi, Gyozo; Xuegang, Huang; Pedersen, Torben Bach

    2008-01-01

    In order to provide context--aware Location--Based Services, real location data of mobile users must be collected and analyzed by spatio--temporal data mining methods. However, the data mining methods need precise location data, while the mobile users want to protect their location privacy....... To remedy this situation, this paper first formally defines novel location privacy requirements. Then, it briefly presents a system for privacy--preserving trajectory collection that meets these requirements. The system is composed of an untrusted server and clients communicating in a P2P network. Location...... data is anonymized in the system using data cloaking and data swapping techniques. Finally, the paper empirically demonstrates that the proposed system is effective and feasible....

  14. Radiations to preserve world heritage

    International Nuclear Information System (INIS)

    Hurel, T.

    2017-01-01

    This article details the use of radiation to preserve the archaeological and artistic heritage. Gamma radiations are used to kill living organisms (insects, fungi and moulds) and to solidify styren-polyester resins that may be injected in wood items to reinforce them. Neutron irradiations are used to reveal the structure of an item and to get information on the materials the item is made of. Both irradiations are non-destructive. Carbon 14 dating is efficient to age items but beyond 50.000 years the method becomes ineffective and other methods like thermoluminescence take over. For instance it is the thermoluminescence method applied on flints found on the Jebel Irhoud site (Morocco) that has allowed to push back the age of the first Homo Sapiens by 100.000 years to reach 300.000 years. (A.C.)

  15. [Chemotherapy and women fertility preservation].

    Science.gov (United States)

    Gauthier, Tristan; Piver, Pascal; Durand, Lise-Marie; Donadel, Lorène; Pech, Jean-Christophe; Roux, Christophe; Aubard, Yves

    2010-01-01

    Agressive chemotherapy can lead to premature ovarian failure and loss of fertility in women and children. Embryo cryopreservation is an established clinical procedure of fertility preservation but with several limitations. Others options are available. Cryopreservation ovarian cortex tissu have to be suggested in case of high gonadotoxic treatment. It doesn't require puberty and delay in initiation of chemotherapy. The first birth in France after orthotopic graft of ovarian tissu thawed have been recently described with a promising process. Oocyte cryopreservation is available for women without partner but the experience is limited. Gonadotrophin-releasing hormone (GnRH) agonist therapy as ovarian protectants seem interesting. Follicular growth and maturation in vitro are still experimental. Copyright 2010 Elsevier Masson SAS. All rights reserved.

  16. Saliva Preservative for Diagnostic Purposes

    Science.gov (United States)

    Pierson, Duane L.; Mehta, Satish K.

    2012-01-01

    Saliva is an important body fluid for diagnostic purposes. Glycoproteins, glucose, steroids, DNA, and other molecules of diagnostic value are found in saliva. It is easier to collect as compared to blood or urine. Unfortunately, saliva also contains large numbers of bacteria that can release enzymes, which can degrade proteins and nucleic acids. These degradative enzymes destroy or reduce saliva s diagnostic value. This innovation describes the formulation of a chemical preservative that prevents microbial growth and inactivates the degradative enzymes. This extends the time that saliva can be stored or transported without losing its diagnostic value. Multiple samples of saliva can be collected if needed without causing discomfort to the subject and it does not require any special facilities to handle after it is collected.

  17. Preserving experience through expert systems

    International Nuclear Information System (INIS)

    Jelinek, J.B.; Weidman, S.H.

    1989-01-01

    Expert systems technology, one of the branches in the field of computerized artificial intelligence, has existed for >30 yr but only recently has been made available on commercially standard hardware and software platforms. An expert system can be defined as any method of encoding knowledge by representing that knowledge as a collection of facts or objects. Decisions are made by the expert program by obtaining data about the problem or situation and correlating encoded facts (knowledge) to the data until a conclusion can be reached. Such conclusions can be relayed to the end user as expert advice. Realizing the potential of this technology, General Electric (GE) Nuclear Energy (GENE) has initiated a development program in expert systems applications; this technology offers the potential for packaging, distributing, and preserving nuclear experience in a software form. The paper discusses application fields, effective applications, and knowledge acquisition and knowledge verification

  18. Privacy-preserving distributed clustering

    DEFF Research Database (Denmark)

    Erkin, Zekeriya; Veugen, Thijs; Toft, Tomas

    2013-01-01

    with any other entity, including the service provider. Such privacy concerns lead to trust issues between entities, which clearly damages the functioning of the service and even blocks cooperation between entities with similar data sets. To enable joint efforts with private data, we propose a protocol......, or in some cases, information from different databases is pooled to enrich the data so that the merged database can improve the clustering effort. However, in either case, the content of the database may be privacy sensitive and/or commercially valuable such that the owners may not want to share their data...... provider with computations. Experimental results clearly indicate that the work we present is an efficient way of deploying a privacy-preserving clustering algorithm in a distributed manner....

  19. SMART PACKAGING FOR FOOD PRESERVATION

    Directory of Open Access Journals (Sweden)

    Raquel Rodríguez-Sauceda

    2014-07-01

    Full Text Available One of the biggest challenges of the food industry is the preservation of its products, that is, to prevent them from being attacked by microorganisms that decompose them hauling economic losses and severe health damage to the consumer. Today, competition in the food industry is very high and any company that does not offer the quality products is doomed to fail. Consumers demand more and the industry still stands offering what is asked: quality, security and safety. The package, in addition to fulfilling its core functions is becoming a means of sophisticated interactions with content and a record of relevant information for both the end consumer and intermediate players in the value chain and concepts are born of active and intelligent packaging. A smart container is defined as a system that monitors the condition of the packaged product, being able to register and provide information about product quality or condition of the container, showing the possible "abnormal" practices that have suffered the product or the container during the entire supply chain, such as transportation or storage. These systems monitor the mechanisms of altered food due to physiological, chemical and biological processes that respond and communicate changes in the status of the product as time-temperature, Oxygen, Carbon dioxide, microbial growth, etc. There are different types of smart packaging such as time-temperature indicators, color indicators, indicators of pathogens and indicators of leaks, to name a few. Through literature review, arguments that demonstrate the usefulness and necessity of the use of smart packaging to preserve the quality and safety of the product it contains, from manufacturing to the time it is used by consumers were found, as these besides communicating or providing information about their state, acting as a marketing tool.

  20. Flexible employment policies and working conditions: the Netherlands

    NARCIS (Netherlands)

    Klein Hesselink, D.J.; Miedema, E.; Goudswaard, A.; Kraan, K.O.

    2000-01-01

    The European Foundation for the Improvement of Living and Working Conditions has commissioned a research project to analyse the impact of flexible employment policies and human resources management on working conditions at the corporate level. Research institutes of seven countries participate in

  1. Policy incentives for flexible district heating in the Baltic countries

    DEFF Research Database (Denmark)

    Sneum, Daniel Møller; Sandberg, Eli; Koduvere, Hardi

    2018-01-01

    This study analyzes the impacts of taxes, subsidies, and electricity transmission and distribution tariffs and heat storage on the operation and economic feasibility of district heating plants with different flexibility potentials in the Baltic countries. Under 2016 conditions, the lowest levelized...

  2. Designing Adaptable Ships: Modularity and Flexibility in Future Ship Designs

    Science.gov (United States)

    2016-01-01

    with motors, belts, shafts , seals, valves, hose spindles , and switches. If ship installation is not installed, the system will be status quo. Ship...Impact: the current centrifugal purifiers (Alfa-Laval) have experienced frequent failures with motor, belts, shafts , seals, valves, hose spindles ... Designing Adaptable Ships Modularity and Flexibility in Future Ship Designs John F. Schank, Scott Savitz, Ken Munson, Brian Perkinson, James

  3. Flexible Connectivity in the Aging Brain Revealed by Task Modulations

    NARCIS (Netherlands)

    Geerligs, Linda; Saliasi, Emi; Renken, Remco J.; Maurits, Natasha M.; Lorist, Monicque M.

    Recent studies have shown that aging has a large impact on connectivity within and between functional networks. An open question is whether elderly still have the flexibility to adapt functional network connectivity (FNC) to the demands of the task at hand. To study this, we collected fMRI data in

  4. Granular shear flows of flexible rod-like particles

    Science.gov (United States)

    Guo, Y.; Curtis, J.; Wassgren, C.; Ketterhagen, W.; Hancock, B.

    2013-06-01

    Flexible particles are widely encountered in nature, e.g., stalks of plants, fiberglass particles, and ceramic nanofibers. Early studies indicated that the deformability of particles has a significant impact on the properties of granular materials and fiber suspensions. In this study, shear flows of flexible particles are simulated using the Discrete Element Method (DEM) to explore the effect of particle flexibility on the flow behavior and constitutive laws. A flexible particle is formed by connecting a number of constituent spheres in a straight line using elastic bonds. The forces/moments due to the normal, tangential, bending, and torsional deformation of a bond resist the relative movement between two bonded constituent spheres. The bond stiffness determines how difficult it is to make a particle deform, and the bond damping accounts for the energy dissipation in the particle vibration process. The simulation results show that elastically bonded particles have smaller coefficients of restitution compared to rigidly connected particles, due to the fact that kinetic energy is partially converted to potential energy in a contact between flexible particles. The coefficient of restitution decreases as the bond stiffness decreases and the bond damping coefficient increases. As a result, smaller stresses are obtained for granular flows of the flexible particles with smaller bond stiffness and larger bond damping coefficient.

  5. Temporal trends of preservative allergy in Denmark (1985-2008)

    DEFF Research Database (Denmark)

    Thyssen, Jacob P; Engkilde, Kåre; Lundov, Michael D

    2010-01-01

    Most cosmetics and industrial products contain preservatives. Preservative allergy is common and, historically, changing contact allergy epidemics caused by preservatives have been observed. In 1997, Alan Dillarstone predicted a stable development of preservative allergy following mandatory...

  6. Wearable Flexible Sensors: A Review

    KAUST Repository

    Nag, Anindya

    2017-05-18

    The paper provides a review on some of the significant research work done on wearable flexible sensors (WFS). Sensors fabricated with flexible materials have been attached to a person along with the embedded system to monitor a parameter and transfer the significant data to the monitoring unit for further analyses. The use of wearable sensors has played a quite important role to monitor physiological parameters of a person to minimize any malfunctioning happening in the body. The paper categorizes the work according to the materials used for designing the system, the network protocols and different types of activities that were being monitored. The challenges faced by the current sensing systems and future opportunities for the wearable flexible sensors regarding its market values are also briefly explained in the paper.

  7. Wearable Flexible Sensors: A Review

    KAUST Repository

    Nag, Anindya; Mukhopadhyay, Subhas Chandra; Kosel, Jü rgen

    2017-01-01

    The paper provides a review on some of the significant research work done on wearable flexible sensors (WFS). Sensors fabricated with flexible materials have been attached to a person along with the embedded system to monitor a parameter and transfer the significant data to the monitoring unit for further analyses. The use of wearable sensors has played a quite important role to monitor physiological parameters of a person to minimize any malfunctioning happening in the body. The paper categorizes the work according to the materials used for designing the system, the network protocols and different types of activities that were being monitored. The challenges faced by the current sensing systems and future opportunities for the wearable flexible sensors regarding its market values are also briefly explained in the paper.

  8. Living in a Flexible Space

    Science.gov (United States)

    Canepa, Simona

    2017-10-01

    How long does a space or an object have to last? If in the past an object or a building manufacturing was designed to last as much as possible, nowadays it is designed to have a life related to the time in which it will be used. Flexibility is what characterizes a space, it’s the ability to be variable and adaptable to changes in the lives of users or in relation to the use which these will make over time. The evolution of the labour market, the difficulty of inserting within it and the need to push more and more frequent move today in the trial of living space models increasingly flexible: people, especially young people, are forced to move on territory outlining a new condition to which the flexible nomadic dwellings offer an adequate response, ensuring high functional performance in confined spaces.

  9. Balancing energy flexibilities through aggregation

    DEFF Research Database (Denmark)

    Valsomatzis, Emmanouil; Hose, Katja; Pedersen, Torben Bach

    2014-01-01

    One of the main goals of recent developments in the Smart Grid area is to increase the use of renewable energy sources. These sources are characterized by energy fluctuations that might lead to energy imbalances and congestions in the electricity grid. Exploiting inherent flexibilities, which exist...... in both energy production and consumption, is the key to solving these problems. Flexibilities can be expressed as flex-offers, which due to their high number need to be aggregated to reduce the complexity of energy scheduling. In this paper, we discuss balance aggregation techniques that already during...... aggregation aim at balancing flexibilities in production and consumption to reduce the probability of congestions and reduce the complexity of scheduling. We present results of our extensive experiments....

  10. FLEXIBLE BUDGET OF SPORT COMPETITIONS

    Directory of Open Access Journals (Sweden)

    Dragan Vukasović

    2009-11-01

    Full Text Available Manager of sport competition has right to decide and also to take responsibility for costs, income and financial results. From economic point of wiev flexible budget and planning cost calculations is top management base for analyzing success level of sport competition. Flexible budget is made before sport competition with few output level, where one is always from static plan-master plan. At the end of competition when we have results, we make report of plan executing and we also analyzing plan variances. Results of comparation between achieved and planning level of static budget can be acceptable if achieved level is approximate to budget level or if we analyzing results from gross or net income. Flexible budget become very important in case of world eco- nomic crises

  11. Flexible Query Answering Systems 2006

    DEFF Research Database (Denmark)

    -computer interaction. The overall theme of the FQAS conferences is innovative query systems aimed at providing easy, flexible, and intuitive access to information. Such systems are intended to facilitate retrieval from information repositories such as databases, libraries, and the World-Wide Web. These repositories......This volume constitutes the proceedings of the Seventh International Conference on Flexible Query Answering Systems, FQAS 2006, held in Milan, Italy, on June 7--10, 2006. FQAS is the premier conference for researchers and practitioners concerned with the vital task of providing easy, flexible...... are typically equipped with standard query systems which are often inadequate, and the focus of FQAS is the development of query systems that are more expressive, informative, cooperative, and productive. These proceedings contain contributions from invited speakers and 53 original papers out of about 100...

  12. Flexible wings in flapping flight

    Science.gov (United States)

    Moret, Lionel; Thiria, Benjamin; Zhang, Jun

    2007-11-01

    We study the effect of passive pitching and flexible deflection of wings on the forward flapping flight. The wings are flapped vertically in water and are allowed to move freely horizontally. The forward speed is chosen by the flapping wing itself by balance of drag and thrust. We show, that by allowing the wing to passively pitch or by adding a flexible extension at its trailing edge, the forward speed is significantly increased. Detailed measurements of wing deflection and passive pitching, together with flow visualization, are used to explain our observations. The advantage of having a wing with finite rigidity/flexibility is discussed as we compare the current results with our biological inspirations such as birds and fish.

  13. Technical note: preservation of tissues and gastrointestinal tract portions by plastic coating or plastination.

    Science.gov (United States)

    Pond, K R; Holladay, S D; Luginbuhl, J M

    1992-04-01

    Two methods to preserve gastrointestinal tract (GIT) organs and tissues, plastic coating (PC) and plastination (PN), were investigated and compared. Specimens to be preserved were removed from animals within 2 h of death and immediately cleaned with water. Digesta contents were removed by flushing desired portions of GIT with water until the exiting water was clear. In the PC method, cleaned specimens were dehydrated by immersion in an isopropanol solution, dried with forced air after positioning and orientation as in situ, and finally coated on the outer and inner surfaces with a clear plastic material. In the PN procedure, specimens were filled with, and submerged in, a low-formaldehyde fixative, then dehydrated by immersion in a cold acetone solution. Dehydrated specimens were immersed in silicone and placed in a freeze drier for impregnation under low vacuum, followed by overnight gas curing with a silicone crosslinker. Finally, viewing windows were cut out with a scalpel in GIT preserved by both methods. Preserved GIT and tissues had an appearance similar to their appearance in vivo. The PC method was simple and inexpensive. Plastinated specimens were more flexible, durable, and lifelike than those preserved by the PC method. In addition, many body parts, such as muscles, nerves, bones, ligaments, and central nervous system specimens, were preserved by PN. Both methods were found to be useful tools for postmortem studies of tissues and GIT organs.

  14. Preservation Copying Endangered Historic Negative Collections

    DEFF Research Database (Denmark)

    Kejser, Ulla Bøgvad

    2008-01-01

    This article discusses preservation copying of unstable B&W nitrate and acetate still photographic negatives. It focuses on evaluating two different strategies for preserving the copies from a point of view of quality and cost-effectiveness. The evaluated strategies are preservation of the master...... by describing essential characteristics of negatives, which must be passed on to the copies, and the required metadata and technical imaging specifications. Next the paper discusses strategies for preservation and makes an analysis with the LIFE2 Costing Model. The paper concludes that the most beneficial...... and cost-effective preservation solution for large format negatives is to keep the preservation copies as digital files. However, it also acknowledges that it is important to revisit such strategies regularly to monitor changes in user expectations, technologies and costs....

  15. Conceptual Paper: Digital Preservation Strategies in Archival Institution

    OpenAIRE

    Ismail Adila; Bullah Affandy Habee

    2018-01-01

    In this paper, the overall overview of concept of preservation regardless if it is preservation of physical records/archives or digital records/archives is discussed. The concept of the preservation discussed includes preventive preservation, restorative preservation, and content preservation. Then the concept of digital preservation. Furthermore, this paper highlighted the strategies and methods used in implementing the preservation of digital records/archives. The issues those are involved ...

  16. Plastination of macroparasites: An eco-friendly method of long-term preservation.

    Science.gov (United States)

    Kumar, Niranjan; Das, Bhupamani; Solanki, Jayesh B; Jadav, Mehul M; Menaka, Ramasamy

    2017-11-01

    Preservation of macroparasites by infiltrating the polymer in the tissues can defy the inherited shortcoming of classical wet preservation method. Preservation was done by infiltrating the melamine alone or with xylene (MX)/chloroform (MC)/turpentine oil (MT) in 1:1 and hardener (MH) in 9:1 ratio in the tissues of the gross specimen of the animal parasites. The plastinated models withstand the process of microbial decomposition, and remain intact in the environmental conditions. The polymer mixture resists the entry of the water molecule, and model dried just after taking out it from the water tank. Overall, the plastinated parasites were dry, non-sticky, glossy, odorless, chemical free, and harmless, to some extent flexible, with detectable morphological structure, and retain their natural form but lost their natural color. Full marks were assigned to the degree of dryness, non-stickiness, and odorlessness to the model plastinated in different solutions on a five-point scale. For flexibility, the score was 1.2, 2.2, and 2.4 for the plastinated model in melamine/MH, MX/MC, and MT solutions, respectively. The average score of glossiness was 4.6 and 5 for the specimen plastinated in melamine/MH and MX/MC/MT solutions, respectively. The degree of dryness, glossiness, stickiness, and flexibility varies non-significantly, with the polymer mixtures used. The prepared model can be used to educate the students/general mass population.

  17. Plastination of macroparasites: An eco-friendly method of long-term preservation

    Directory of Open Access Journals (Sweden)

    Niranjan Kumar

    2017-11-01

    Full Text Available Aim: Preservation of macroparasites by infiltrating the polymer in the tissues can defy the inherited shortcoming of classical wet preservation method. Materials and Methods: Preservation was done by infiltrating the melamine alone or with xylene (MX/chloroform (MC/turpentine oil (MT in 1:1 and hardener (MH in 9:1 ratio in the tissues of the gross specimen of the animal parasites. Results: The plastinated models withstand the process of microbial decomposition, and remain intact in the environmental conditions. The polymer mixture resists the entry of the water molecule, and model dried just after taking out it from the water tank. Overall, the plastinated parasites were dry, non-sticky, glossy, odorless, chemical free, and harmless, to some extent flexible, with detectable morphological structure, and retain their natural form but lost their natural color. Full marks were assigned to the degree of dryness, non-stickiness, and odorlessness to the model plastinated in different solutions on a five-point scale. For flexibility, the score was 1.2, 2.2, and 2.4 for the plastinated model in melamine/MH, MX/MC, and MT solutions, respectively. The average score of glossiness was 4.6 and 5 for the specimen plastinated in melamine/MH and MX/MC/MT solutions, respectively. The degree of dryness, glossiness, stickiness, and flexibility varies non-significantly, with the polymer mixtures used. Conclusion: The prepared model can be used to educate the students/general mass population.

  18. Most promising flexible generators for the wind dominated market

    International Nuclear Information System (INIS)

    Vorushylo, I.; Keatley, P.; Hewitt, NJ

    2016-01-01

    The intermittent nature of wind power and other forms of variable renewable energy requires complementary dispatchable flexible generators in order to guarantee the efficient, reliable and secure operation of electricity systems. The most popular solution to date has been peaking plant, usually in the form of open-cycle-gas- turbines (OCGT). Energy storage technologies have so far been considered too expensive, however technology development, as well as challenging renewable targets could potentially make storage economically viable. Although new advanced flexible combined-cycle gas turbines (CCGT) have been developed by some manufacturers, they have not yet been investigated in electricity market models. This paper describes a techno-economic assessment of the most suitable flexible technologies for the wind-dominated all Ireland electricity market (the Single Electricity Market (SEM)). The analysis is conducted by considering the impact of a series of policy scenarios which are compared in an electricity market model. The comparison is quantified using three primary metrics: technical benefits to the system, economic advantages to the consumer and investment viability. Modelling results suggest that advanced CCGT and energy storage solutions are the most advantageous, however they need strong governmental support to attract potential investors and guarantee deployment in the market. - Highlights: •Future efficiency and stability of the wind dominated require flexible generators. •Energy storage systems are the most technically advantageous flexible generators. •The advanced flexible CCGT is the most efficient solution from an economic point of view. •Traditional peaking plants (OCGT) is the least advantageous flexible generator. •The governments will play a key role in integration of the flexible technologies.

  19. [Flexibility competencies: emotional organization management].

    Science.gov (United States)

    Caballero Muñoz, Domingo; Blanco Prieto, Antonio

    2007-11-01

    The aim of this article is to analyse the transferral of flexibility from contemporary organizations to workers. Through the approach of management by competencies, organizations try to develop in their workers behaviours that are related to efficient job performance. In order to appraise the importance of this approach, we used a critical-rational perspective to discuss the productivity demands that are characteristic of advanced industrial societies. The article shows how the link between workers' flexibility management and their emotional competencies affects their lives, which, like the organizations, should be versatile and adaptable to change.

  20. Polymer electronics a flexible technology

    CERN Document Server

    Technology, Rapra

    2009-01-01

    The worldwide market for polymer electronic products has been estimated to be worth up to £15 billion by 2015 and the opportunity for new markets could be as high as £125 billion by 2025.'The rapid development of polymer electronics has revealed the possibility for transforming the electronics market by offering lighter, flexible and more cost effective alternatives to conventional materials and products. With applications ranging from printed, flexible conductors and novel semiconductor components to intelligent labels and large area displays and solar panels, products that were previously un

  1. Privacy Preservation in Distributed Subgradient Optimization Algorithms

    OpenAIRE

    Lou, Youcheng; Yu, Lean; Wang, Shouyang

    2015-01-01

    Privacy preservation is becoming an increasingly important issue in data mining and machine learning. In this paper, we consider the privacy preserving features of distributed subgradient optimization algorithms. We first show that a well-known distributed subgradient synchronous optimization algorithm, in which all agents make their optimization updates simultaneously at all times, is not privacy preserving in the sense that the malicious agent can learn other agents' subgradients asymptotic...

  2. Knowledge preservation strategies for nuclear power plants

    International Nuclear Information System (INIS)

    Koruna, S.; Bachmann, H.

    2004-01-01

    The nuclear industry is currently facing several challenges. An internal threat to the safety and operations of nuclear power plants is the loss of those employees who hold knowledge that is either critical to operations or safety. This report discusses the possibilities to preserve knowledge in nuclear power plants. Dependent on the degree of tacitness two different knowledge preservation strategies can be discerned: personalization and codification. The knowledge preservation activities discussed are valued according to the criteria: cost, immediacy of availability and completeness

  3. Development of Flexible Pneumatic Cylinder with Built-in Flexible Linear Encoder and Flexible Bending Sensor

    Science.gov (United States)

    Akagi, Tetsuya; Dohta, Shujiro; Matsushita, Hisashi; Fukuhara, Akimasa

    The purpose of this study is to develop a lightweight and intelligent soft actuator which can be safely attached to the human body. A novel flexible pneumatic cylinder that can be used even if it is deformed by external force had been proposed. The cylinder can realize both pushing and pulling motions even if the cylinder bends. In this paper, a flexible pneumatic cylinder with a built-in flexible linear encoder is proposed and tested. The encoder can detect the cylinder displacement even if the cylinder bends. In the next step, to realize an intelligent flexible cylinder, it is essential to recognize the angle of deflection of the cylinder to estimate the direction of the external force. Therefore, a flexible bending sensor that can measure the directional angle by attaching it to the end of the cylinder is also proposed and tested. The tested bending sensor also consists of four inexpensive photo-reflectors set on the circumferential surface to the cylinder tube every 90 degrees from the center of the tube. By measuring the distance between the photo reflector and the surface of the tube at each point, the bending directional angle of the cylinder can be obtained. A low cost measuring system using a micro-computer incorporating a programmed Up/Down counter to measure the displacement of the cylinder is also developed. As a result, it was confirmed that the measuring accuracy of the bending directional angle was good, less than 0.7 degrees as a standard deviation.

  4. ACHP | Sustainability and Historic Preservation Links

    Science.gov (United States)

    Preservation) Solar Panels Incorporating Solar Panels in a Rehabilitation Project (National Park Service ) Installing Solar Panels on Historic Buildings: A Survey of the Regulatory Environment (Department of Energy

  5. Cosmetic preservative labelling on the Thai market.

    Science.gov (United States)

    Bunyavaree, Monthathip; Kasemsarn, Pranee; Boonchai, Waranya

    2016-04-01

    Preservatives are added to cosmetics and other consumer products to prevent microbial growth and product degradation. Many cosmetic preservatives are skin sensitizers and frequent causes of contact dermatitis. The use of preservatives may vary by country and/or region, according to legislation, and may be reflected in differences in the prevalence rates of preservative allergy worldwide. To examine the type and frequency of preservative use in cosmetics sold in Thai markets in metropolitan Bangkok, Thailand. Preservatives contained in 1000 different cosmetics sold in Thai markets were documented and analysed, based on the labelling of ingredients. Most of the cosmetic and skincare products sold in Thai markets were international brands, with only a small proportion of cosmetic products being produced in Thailand. International brand cosmetics were more likely to contain non-formaldehyde-releasing preservatives than domestically produced brands. Isothiazolinone-based preservatives, which are responsible for the current increase in the prevalence of contact allergy, were found at a significant frequency in domestically produced, leave-on cosmetic products. Preservatives in cosmetics were significantly different according to source of production and type of cosmetics. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. KNK-II knowledge preservation and related activities in Germany

    International Nuclear Information System (INIS)

    Knebel, J.; Wehmann, U.; Stanculescu, A.

    2004-01-01

    Many of the scenarios describing possible energy futures, e.g., the World Energy Council and the Intergovernmental Panel on Climate Change (IPCC), foresee a role for nuclear power in meeting a growing world energy demand through 2050. While some scenarios explore the impact of a nuclear phase out, others envision a major growth in nuclear technology's share of the world energy mix. Given the forecasted growth in world population and in economic development, the environmental advantages of nuclear power, and concerns over climate change and the growth of greenhouse gas emissions, it is not unreasonable to expect an increased interest in nuclear power in the coming decades. Loss of nuclear knowledge is a serious concern, in particular with regard to areas where, for various reasons, nuclear technology development and innovation has been slowed down. Knowledge can be preserved by archival techniques and by passing it on to new generations. In the case of the Federal Republic of Germany, in spite of the lack of funding and political support, both avenues are followed. Data retrieval and preservation by archiving activities for the German experimental fast reactor KNK-II were undertaken within the framework of IAEA's initiative on Fast Reactor Knowledge Preservation. The paper will shortly introduce the IAEA initiative (scope, objectives, status, and outlook). The general approach to nuclear knowledge preservation in Germany will be presented, and the concrete archiving activities undertaken for KNK-II will be summarized. (author)

  7. Design and measured performance of a porous evaporative cooler for preservation of fruits and vegetables

    International Nuclear Information System (INIS)

    Anyanwu, E.E.

    2004-01-01

    The design, construction and measured performance of a porous evaporative cooler for preservation of fruits and vegetables are reported. The experimental cooler, with a total storage space of 0.014 m 3 , consists of a cuboid shaped porous clay container located inside another clay container. The gap between them is filled with coconut fibre. A water reservoir linked to the cooler at the top through a flexible pipe supplied water to fill the gap, thus keeping the coconut fibre continuously wet. Results of the transient performance tests revealed that the cooler storage chamber temperature depression from ambient air temperature varied over 0.1-12 deg. C. Ambient air temperatures during the test periods ranged over 22-38 deg. C. The results also illustrate superior performance of the cooler over open air preservation of vegetables soon after harvest during the diurnal operations. Thus, the evaporative cooler has prospects for use for short term preservation of vegetables and fruits soon after harvest

  8. Business rules for creating process flexibility : Mapping RIF rules and BDI rules

    NARCIS (Netherlands)

    Gong, Y.; Overbeek, S.J.; Janssen, M.

    2011-01-01

    Business rules and software agents can be used for creating flexible business processes. The Rule Interchange Format (RIF) is a new W3C recommendation standard for exchanging rules among disparate systems. Yet, the impact that the introduction of RIF has on the design of flexible business processes

  9. The Role of Learning Tasks on Attitude Change Using Cognitive Flexibility Hypertext Systems

    Science.gov (United States)

    Godshalk, Veronica M.; Harvey, Douglas M.; Moller, Leslie

    2004-01-01

    In this study, the authors examined the impact of task assignment on the effectiveness of a Web-based experiential exercise based on cognitive flexibility theory to enlighten learner attitudes toward the ill-structured topic of sexual harassment. In the research study, we sought to shed light on the use of a cognitive flexibility approach when…

  10. Taming Time with Flexible Work.

    Science.gov (United States)

    Stamps, David

    1995-01-01

    Because of increasing incidence of burnout among midlevel managers, many companies are reducing workload schedules, an arrangement that would have been unthinkable 10 years ago. Surveys have made the case that flexible work arrangements increase employee happiness and, therefore, productivity. (JOW)

  11. Flexible working motivates all staff.

    Science.gov (United States)

    2001-04-01

    A recent survey has demolished the myth that work-life balance is only of interest to women with children. The survey, commissioned by Lloyds TSB on behalf of the Employers for Work Life Balance organisation, shows that young workers and men are equally interested in flexible working arrangements that allow them to pursue interests outside of work.

  12. Distribution method optimization : inventory flexibility

    NARCIS (Netherlands)

    Asipko, D.

    2010-01-01

    This report presents the outcome of the Logistics Design Project carried out for Nike Inc. This project has two goals: create a model to measure a flexibility aspect of the inventory usage in different Nike distribution channels, and analyze opportunities of changing the decision model of splitting

  13. Flexible spintronic devices on Kapton

    DEFF Research Database (Denmark)

    Bedoya-Pinto, Amilcar; Donolato, Marco; Gobbi, Marco

    2014-01-01

    Magnetic tunnel junctions and nano-sized domain-wall conduits have been fabricated on the flexible substrate Kapton. Despite the delicate nature of tunneling barriers and zig-zag shaped nanowires, the devices show an outstanding integrity and robustness upon mechanical bending. High values of ben...

  14. Flexible Bistable Cholesteric Reflective Displays

    Science.gov (United States)

    Yang, Deng-Ke

    2006-03-01

    Cholesteric liquid crystals (ChLCs) exhibit two stable states at zero field condition-the reflecting planar state and the nonreflecting focal conic state. ChLCs are an excellent candidate for inexpensive and rugged electronic books and papers. This paper will review the display cell structure,materials and drive schemes for flexible bistable cholesteric (Ch) reflective displays.

  15. Requirements for flexible learner monitoring

    NARCIS (Netherlands)

    Glahn, Christian; Specht, Marcus; Koper, Rob

    2007-01-01

    Glahn, C., Specht, M., & Koper, R. (2007). Requirements for flexible learner monitoring. In T. Navarette, J. Blat & R. Koper (Eds.). Proceedings of the 3rd TENCompetence Open Workshop 'Current Research on IMS Learning Design and Lifelong Competence Development Infrastructures' (pp. 89-96). June,

  16. Flexible Schedules and Shift Work.

    Science.gov (United States)

    Beers, Thomas M.

    2000-01-01

    Flexible work hours have gained prominence, as more than 25 million workers (27.6% of all full-time workers) can now vary their schedules. However, there has been little change since the mid-1980s in the proportion who work a shift other than a regular daytime shift. (JOW)

  17. Easy and flexible mixture distributions

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Mabit, Stefan L.

    2013-01-01

    We propose a method to generate flexible mixture distributions that are useful for estimating models such as the mixed logit model using simulation. The method is easy to implement, yet it can approximate essentially any mixture distribution. We test it with good results in a simulation study...

  18. Functional flexibility and team performance

    NARCIS (Netherlands)

    Molleman, E.; Slomp, J.

    1999-01-01

    This study deals with workforce flexibility defined in terms of 'multifunctionality' and 'redundancy'. These concepts refer, respectively, to the number of different tasks a worker has mastered and the number of workers that are qualified to do a specific task. A third factor to be considered is

  19. Can flexibility help you float?

    Science.gov (United States)

    Burton, L. J.; Bush, J. W. M.

    2012-10-01

    We consider the role of flexibility in the weight-bearing characteristics of bodies floating at an interface. Specifically, we develop a theoretical model for a two-dimensional thin floating plate that yields the maximum stable plate load and optimal stiffness for weight support. Plates small relative to the capillary length are primarily supported by surface tension, and their weight-bearing potential does not benefit from flexibility. Above a critical size comparable to the capillary length, flexibility assists interfacial flotation. For plates on the order of and larger than the capillary length, deflection from an initially flat shape increases the force resulting from hydrostatic pressure, allowing the plate to support a greater load. In this large plate limit, the shape that bears the most weight is a semicircle, which displaces the most fluid above the plate for a fixed plate length. Exact results for maximum weight-bearing plate shapes are compared to analytic approximations made in the limits of large and small plate sizes. The value of flexibility for floating to a number of biological organisms is discussed in light of our study.

  20. Flexible Work Schedules. ERIC Digest.

    Science.gov (United States)

    Kerka, Sandra

    Flexible work schedules are one response to changes in the composition of the work force, new life-styles, and changes in work attitudes. Types of alternative work schedules are part-time and temporary employment, job sharing, and flextime. Part-time workers are a diverse group--women, the very young, and older near-retirees. Although part-time…

  1. Light Management in Flexible OLEDs

    NARCIS (Netherlands)

    Harkema, S.; Pendyala, R.K.; Geurts, C.G.C.; Helgers, P.L.J.; Levell, J.W.; Wilson, J.S.; MacKerron, D.

    2014-01-01

    Organic light-emitting diodes (OLEDs) are a promising lighting technology. In particular OLEDs fabricated on plastic foils are believed to hold the future. These planar devices are subject to various optical losses, which requires sophisticated light management solutions. Flexible OLEDs on plastic

  2. Rationality, decision flexibility and pensions

    NARCIS (Netherlands)

    Koç, Emre

    2015-01-01

    In this thesis several different aspects of the standard economic theory (SET) are examined. One of the premises of the SET is that whether or not an agent has choice flexibility does not influence his behavior. In the first chapter of the thesis we design an experiment to test the validity of this

  3. The information profesional and the fundamental principles of preservation management in the digital world

    Directory of Open Access Journals (Sweden)

    Bárbara Muñoz de Solano y Palacios

    2006-01-01

    Full Text Available Preservation in the digital world is one of the central leadership issues of our day. It is the responsibility of many people in many institutions fulfilling many roles. An understanding of the impact of this role differentiation on digital preservation action is crucial to identifying which of the many facets of digital technology we can control, which trends we may only influence, and which aspects we must relinquish any vain expectation for either control or influence. This technical article suggests a framework for understanding preservation in the digital context by creating a bridge from the five core principles of traditional preservation practice: longevity, choice, quality, integrity, and access. Explores the concept of digital information preservation and the efforts made to save a record of our cultural heritage over the past

  4. Fertility Preservation for Transgender Adolescents.

    Science.gov (United States)

    Chen, Diane; Simons, Lisa; Johnson, Emilie K; Lockart, Barbara A; Finlayson, Courtney

    2017-07-01

    To describe fertility preservation (FP) utilization by transgender adolescents within a pediatric gender clinic between July 2013 and July 2016. A retrospective chart review was conducted to abstract demographic and clinical information among adolescents initiating gender-affirming hormones, including patient age at initial FP consultation, birth-assigned sex, race/ethnicity, and outcome of FP consultation. In our sample of 105 transgender adolescents, a total of 13 (seven transgender men and six transgender women) between the age of 14.2 and 20.6 years were seen in formal consultation for FP before initiating hormones. Of these adolescents, four completed sperm cryopreservation and one completed oocyte cryopreservation. Rates of FP utilization among transgender youth were low, which is consistent with a recently published report of FP utilization among transgender youth at another pediatric institution. Identified barriers to FP in our sample included cost, invasiveness of procedures, and desire not to delay medical transition. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  5. Preserving Data for Renewable Energy

    Science.gov (United States)

    Macduff, M.; Sivaraman, C.

    2017-12-01

    The EERE Atmosphere to Electrons (A2e) program established the Data Archive and Portal (DAP) to ensure the long-term preservation and access to A2e research data. The DAP has been operated by PNNL for 2 years with data from more than a dozen projects and 1PB of data and hundreds of datasets expected to be stored this year. The data are a diverse mix of model runs, observational data, and dervived products. While most of the data is public, the DAP has securely stored many proprietary data sets provided by energy producers that are critical to the research goals of the A2e program. The DAP uses Amazon Web Services (AWS) and PNNL resources to provide long-term archival and access to the data with appropriate access controls. As a key element of the DAP, metadata are collected for each dataset to assist with data discovery and usefulness of the data. Further, the DAP has begun a process of standardizing observation data into NetCDF, which allows users to focus on the data instead of parsing the many formats. Creating a central repository that is in tune with the unique needs of the A2e research community is helping active tasks today as well as making many future research efforts possible. In this presentation, we provide an overview the DAP capabilities and benefits to the renewable energy community.

  6. Food preservation by ionising radiation

    International Nuclear Information System (INIS)

    Andrade, M. E.

    1996-01-01

    The process of food preservation by ionising radiation is an alternative, or a complement, to the traditional methods of heating, refrigerating, freezing or using chemical additives. The study and development of this technique has started on the beginning of the fifties but it is based on the radiation killing effect on micro-organisms discovered by the end of last century. Foodstuffs are treated in appropriate plants: isotopic facilities (gamma radiation) and accelerated electron beams produced by machines called accelerators. The FAO and WHO in close cooperation with the IAEA have played an important role on the development of the process and on the increment of the industrial application of food irradiation. Over the world there are about 37 countries trading foods treated by ionising radiation. However, governments have been slow to clear the utilization of this process. The main reason of this attitude is in general due to the fact that the advantages of the technique are not clearly understood. Therefore, the dissemination of the information could on one hand clarify who has to take decisions and on the other hand support the choice of those foods by the consumers. This is the unique way to dynamize the application of this process

  7. Preserving SSC Design Function Using RCM Principles

    International Nuclear Information System (INIS)

    Mohammadi, K.

    2009-01-01

    Reliability-Centered Maintenance (RCM) can be defined as an approach that employs preventive, predictive, proactive, and reactive maintenance practices and strategies in an integrated manner to increase the probability that a Structure, System, or Component (SSC) will function as designed over its life cycle with optimum maintenance. The goal of RCM is to preserve the SSC intended design function at the lowest cost by developing a maintenance strategy that is supported by sound technical and economic justification. RCM has been used extensively by the aircraft, space, defense, power generation, and manufacturing industries where functional failures of SSCs can have the potential to compromise worker or public safety, cause adverse environmental impact, cause loss of production, and/or result in excessive damage to critical SSCs. This paper provides a framework for performing an RCM analysis in support of DOE Order 430.1A (Life Cycle Asset Management) and DOE Order 420.1B (Facility Safety). The influence of RCM on the various aspects of the maintenance program including the work control process is also discussed

  8. Endothelial cell preservation at hypothermic to normothermic conditions using clinical and experimental organ preservation solutions

    NARCIS (Netherlands)

    Post, Ivo C. J. H.; de Boon, Wadim M. I.; Heger, Michal; van Wijk, Albert C. W. A.; Kroon, Jeffrey; van Buul, Jaap D.; van Gulik, Thomas M.

    2013-01-01

    Endothelial barrier function is pivotal for the outcome of organ transplantation. Since hypothermic preservation (gold standard) is associated with cold-induced endothelial damage, endothelial barrier function may benefit from organ preservation at warmer temperatures. We therefore assessed

  9. Flexible devices: from materials, architectures to applications

    Science.gov (United States)

    Zou, Mingzhi; Ma, Yue; Yuan, Xin; Hu, Yi; Liu, Jie; Jin, Zhong

    2018-01-01

    Flexible devices, such as flexible electronic devices and flexible energy storage devices, have attracted a significant amount of attention in recent years for their potential applications in modern human lives. The development of flexible devices is moving forward rapidly, as the innovation of methods and manufacturing processes has greatly encouraged the research of flexible devices. This review focuses on advanced materials, architecture designs and abundant applications of flexible devices, and discusses the problems and challenges in current situations of flexible devices. We summarize the discovery of novel materials and the design of new architectures for improving the performance of flexible devices. Finally, we introduce the applications of flexible devices as key components in real life. Project supported by the National Key R&D Program of China (Nos. 2017YFA0208200, 2016YFB0700600, 2015CB659300), the National Natural Science Foundation of China (Nos. 21403105, 21573108), and the Fundamental Research Funds for the Central Universities (No. 020514380107).

  10. Flexible Composite-Material Pressure Vessel

    Science.gov (United States)

    Brown, Glen; Haggard, Roy; Harris, Paul A.

    2003-01-01

    A proposed lightweight pressure vessel would be made of a composite of high-tenacity continuous fibers and a flexible matrix material. The flexibility of this pressure vessel would render it (1) compactly stowable for transport and (2) more able to withstand impacts, relative to lightweight pressure vessels made of rigid composite materials. The vessel would be designed as a structural shell wherein the fibers would be predominantly bias-oriented, the orientations being optimized to make the fibers bear the tensile loads in the structure. Such efficient use of tension-bearing fibers would minimize or eliminate the need for stitching and fill (weft) fibers for strength. The vessel could be fabricated by techniques adapted from filament winding of prior composite-material vessels, perhaps in conjunction with the use of dry film adhesives. In addition to the high-bias main-body substructure described above, the vessel would include a low-bias end substructure to complete coverage and react peak loads. Axial elements would be overlaid to contain damage and to control fiber orientation around side openings. Fiber ring structures would be used as interfaces for connection to ancillary hardware.

  11. Low Fertility Preservation Utilization Among Transgender Youth.

    Science.gov (United States)

    Nahata, Leena; Tishelman, Amy C; Caltabellotta, Nicole M; Quinn, Gwendolyn P

    2017-07-01

    Research demonstrates a negative psychosocial impact of infertility among otherwise healthy adults, and distress among adolescents facing the prospect of future infertility due to various medical conditions and treatments that impair reproductive health. Guidelines state that providers should counsel transgender youth about potential infertility and fertility preservation (FP) options prior to initiation of hormone therapy. The purpose of this study was to examine the rates of fertility counseling and utilization of FP among a cohort of adolescents with gender dysphoria seen at a large gender clinic. An Institutional Review Board-approved retrospective review of electronic medical records was conducted of all patients with ICD-9/10 codes for gender dysphoria referred to Pediatric Endocrinology for hormone therapy (puberty suppression and/or cross-sex hormones) from January 2014 to August 2016. Seventy-eight patients met inclusion criteria. Five children were prepubertal, no hormone therapy was considered, and they were therefore excluded. Of the remaining 73 patients, 72 had documented fertility counseling prior to initiation of hormone therapy and 2 subjects attempted FP; 45% of subjects mentioned a desire or plan to adopt, and 21% said they had never wanted to have children. Utilization rates of FP are low among transgender adolescents. More research is needed to understand parenthood goals among transgender youth at different ages and developmental stages and to explore the impact of gender dysphoria on decision-making about FP and parenthood. Discussions about infertility risk, FP, and other family building options should be prioritized in this vulnerable adolescent population. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  12. Thin PZT-Based Ferroelectric Capacitors on Flexible Silicon for Nonvolatile Memory Applications

    KAUST Repository

    Ghoneim, Mohamed T.

    2015-04-24

    A flexible version of traditional thin lead zirconium titanate ((Pb1.1Zr0.48Ti0.52O3)-(PZT)) based ferroelectric random access memory (FeRAM) on silicon shows record performance in flexible arena. The thin PZT layer requires lower operational voltages to achieve coercive electric fields, reduces the sol-gel coating cycles required (i.e., more cost-effective), and, fabrication wise, is more suitable for further scaling of lateral dimensions to the nano-scale due to the larger feature size-to-depth aspect ratio (critical for ultra-high density non-volatile memory applications). Utilizing the inverse proportionality between substrate\\'s thickness and its flexibility, traditional PZT based FeRAM on silicon is transformed through a transfer-less manufacturable process into a flexible form that matches organic electronics\\' flexibility while preserving the superior performance of silicon CMOS electronics. Each memory cell in a FeRAM array consists of two main elements; a select/access transistor, and a storage ferroelectric capacitor. Flexible transistors on silicon have already been reported. In this work, we focus on the storage ferroelectric capacitors, and report, for the first time, its performance after transformation into a flexible version, and assess its key memory parameters while bent at 0.5 cm minimum bending radius.

  13. Anuran artifacts of preservation: 27 years later

    Directory of Open Access Journals (Sweden)

    Jessica L. Deichmann

    2009-07-01

    Full Text Available Measurements made on preserved anuran specimens are often used in studies of systematics, ecology and evolution. Here, we examine the effect of preservation on one of the most common measurement of frogs, snout-urostyle length (SUL. Preservation had significanteffects on the SUL of 13 of the 14 species of North American frogs included in this study, with all species decreasing in SUL by 0.31-5.62%. Smaller frog species did not shrink proportionally more or less than larger species. Absolute shrinkage was correlated with SUL and was greater in larger species. Within species, percent shrinkage was not significantly correlated with SUL in 10 species, but significantly greater for larger individuals in 3 species, and decreased with size in 1 species. Absolute shrinkage was statistically greater for larger individuals in 4 species. Our results agree with studies of morphological permutations in fish which show that most preservation-related changes take place within the first few months after initial preservation. We suggest that the potential consequences of using preserved specimens in research must be considered and that future studies continue to examine preservation effects, not only on frogs, but on all preserved specimens used in scientific investigations.

  14. Film sound in preservation and presentation

    NARCIS (Netherlands)

    Campanini, S.

    2014-01-01

    What is the nature of film sound? How does it change through time? How can film sound be conceptually defined? To address these issues, this work assumes the perspective of film preservation and presentation practices, describing the preservation of early sound systems, as well as the presentation

  15. Corn, alfalfa and grass silage preservation principles

    Science.gov (United States)

    Ensiling is the primary means of preserving moist forages for feeding livestock. In ensiling, the crop is stored anaerobically, and sugars in the crop are fermented by lactic acid bacteria naturally on the crop. The crop is preserved by the combination of the acids produced by the lactic acid bacter...

  16. Survey of postharvest handling, preservation and processing ...

    African Journals Online (AJOL)

    Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

  17. 7 CFR 782.14 - Identity preservation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Identity preservation. 782.14 Section 782.14 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF... § 782.14 Identity preservation. (a) The importer and all subsequent buyers of the imported wheat shall...

  18. 20 CFR 638.304 - Historical preservation.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Historical preservation. 638.304 Section 638.304 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM... § 638.304 Historical preservation. The Job Corps Director shall review the “National Register of...

  19. Home Food Preservation Training for Extension Educators

    Science.gov (United States)

    Goard, Linnette Mizer; Hill, Melinda; Shumaker, Katharine; Warrix, Marisa

    2013-01-01

    During times of economic downturn, there has been an increased interest in home food preservation. As the primary resource for current research-based recommendations, a team of Extension Family and Consumer Sciences educators with specialization in food safety and food preservation responded to this demand by developing a standardized food…

  20. Historic Preservation Vocabulary, Designations, and Resources

    Science.gov (United States)

    Williams, Stacy D.

    2011-01-01

    Preservationists use a common language that had its beginnings in the National Historic Preservation Act of 1966. This act created the Secretary of the Interior's Standards for the Treatment of Historic Properties, which defined the terms and treatments that have become the standard for preservation projects and plans. These terms have been used…

  1. Emerging concepts in liver graft preservation

    Science.gov (United States)

    Bejaoui, Mohamed; Pantazi, Eirini; Folch-Puy, Emma; Baptista, Pedro M; García-Gil, Agustín; Adam, René; Roselló-Catafau, Joan

    2015-01-01

    The urgent need to expand the donor pool in order to attend to the growing demand for liver transplantation has obliged physicians to consider the use of suboptimal liver grafts and also to redefine the preservation strategies. This review examines the different methods of liver graft preservation, focusing on the latest advances in both static cold storage and machine perfusion (MP). The new strategies for static cold storage are mainly designed to increase the fatty liver graft preservation via the supplementation of commercial organ preservation solutions with additives. In this paper we stress the importance of carrying out effective graft washout after static cold preservation, and present a detailed discussion of the future perspectives for dynamic graft preservation using MP at different temperatures (hypothermia at 4 °C, normothermia at 37 °C and subnormothermia at 20 °C-25 °C). Finally, we highlight some emerging applications of regenerative medicine in liver graft preservation. In conclusion, this review discusses the “state of the art” and future perspectives in static and dynamic liver graft preservation in order to improve graft viability. PMID:25593455

  2. Whale Preservation. Grades Five to Nine.

    Science.gov (United States)

    Racicot, Darlene

    Dedicated to the conservation and preservation of whales, dolphins, and porpoises through public education, this instructional unit for grades 5-9 provides current (1993) facts, lesson plans, activities, and conservation and preservation techniques. Interdisciplinary activities involve students in debates, critical thinking, research, and…

  3. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu Reprotopia_Main_Menu ... Cancer Fertility Preservation for Children Diagnosed with Cancer Patient Pocket Guides Patient Pocket Guides Patient Guides Fertility ...

  4. Knowledge preservation in the nuclear industry

    International Nuclear Information System (INIS)

    Yanev, Y.

    2004-01-01

    The paper presents examples of knowledge loss in different areas related to attrition, retirements or layoff as well as the consequences of the loss of knowledge. The nature of the so called tacit knowledge and its role as a barrier to knowledge preservation is discussed. Strategies for knowledge preservation in the nuclear industry are presented

  5. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... this website. Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers ... Visit the Oncofertility Consortium Web site Use the online Clinic/Center Finder to find the fertility preservation ...

  6. Preservation in the Age of Google: Digitization, Digital Preservation, and Dilemmas

    Science.gov (United States)

    Conway, Paul

    2010-01-01

    The cultural heritage preservation community now functions largely within the environment of digital technologies. This article begins by juxtaposing definitions of the terms "digitization for preservation" and "digital preservation" within a sociotechnical environment for which Google serves as a relevant metaphor. It then reviews two reports…

  7. Integrated flexible capacity and inventory management under flexible capacity uncertainty

    OpenAIRE

    Paç, Mehmet Fazıl

    2006-01-01

    Cataloged from PDF version of article. In a manufacturing environment with volatile demand, inventory management can be coupled with dynamic capacity adjustments for handling the fluctuations more effectively. In this study we consider the integrated management of inventory and flexible capacity management under seasonal stochastic demand and uncertain labor supply. The capacity planning problem is investigated from the workforce planning perspective. We consider a manufactu...

  8. Package Formats for Preserved Digital Material

    DEFF Research Database (Denmark)

    Zierau, Eld

    2012-01-01

    This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up requireme......This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up...... requirements for package formats used for long term preserved digital material, and using these requirements as the basis for analysing a range of package formats. The result of the concrete investigation is that the WARC format is the package format best suited for the listed requirements. Fulfilling...

  9. Flexible Learning Environments: Leveraging the Affordances of Flexible Delivery and Flexible Learning

    Science.gov (United States)

    Hill, Janette R.

    2006-01-01

    The purpose of this article is to explore the key features of "flexible learning environments" (FLEs). Key principles associated with FLEs are explained. Underlying tenets and support mechanisms necessary for the implementation of FLEs are described. Similarities and differences in traditional learning and FLEs are explored. Finally, strategies…

  10. Graphene-based materials for flexible supercapacitors.

    Science.gov (United States)

    Shao, Yuanlong; El-Kady, Maher F; Wang, Lisa J; Zhang, Qinghong; Li, Yaogang; Wang, Hongzhi; Mousavi, Mir F; Kaner, Richard B

    2015-06-07

    The demand for flexible/wearable electronic devices that have aesthetic appeal and multi-functionality has stimulated the rapid development of flexible supercapacitors with enhanced electrochemical performance and mechanical flexibility. After a brief introduction to flexible supercapacitors, we summarize current progress made with graphene-based electrodes. Two recently proposed prototypes for flexible supercapacitors, known as micro-supercapacitors and fiber-type supercapacitors, are then discussed. We also present our perspective on the development of graphene-based electrodes for flexible supercapacitors.

  11. A Flexible, Grid-Enabled Web Portal for GROMACS Molecular Dynamics Simulations

    NARCIS (Netherlands)

    van Dijk, Marc; Wassenaar, Tsjerk A; Bonvin, Alexandre M J J

    2012-01-01

    Molecular dynamics simulations are becoming a standard part of workflows in structural biology. They are used for tasks as diverse as assessing molecular flexibility, probing conformational changes, assessing the impact of mutations, or gaining information about molecular interactions. However,

  12. A flexible, grid-enabled web portal for GROMACS molecular dynamics simulations

    NARCIS (Netherlands)

    van Dijk, M.; Wassenaar, T.A.; Bonvin, A.M.J.J.

    2012-01-01

    Molecular dynamics simulations are becoming a standard part of workflows in structural biology. They are used for tasks as diverse as assessing molecular flexibility, probing conformational changes, assessing the impact of mutations, or gaining information about molecular interactions. However,

  13. Indigenous Language in the Preservation

    African Journals Online (AJOL)

    his strange home but this was impacted through language and communication from ... maintain intact for future use and to keep things as it is in its original state. .... law and order, truth, trustworthiness and a whole number of them have been ...

  14. Flexibility in the context of intelligent plant's development

    Directory of Open Access Journals (Sweden)

    Fernando Augusto Pereira

    2008-07-01

    Full Text Available Globalization and competition among companies bring changes in the product development, reducing increasingly its life's cycle. Corporations are opting to world-wide products platforms, with global strategies. Besides the wider vision about corporative strategies, dynamic markets and strong competition are impacting in the medium and short term companies' demands. All these characteristics create turbulences in the organizations, but they can also convey opportunities. In order to take strategic advantage in this process, companies ought to innovate, changing the manner of planning and operating its plants. One possibility to achieve these goals is using flexibility in the manufacture. In this paper, flexibility aspects will be addressed in context of band, reply and dimension, and, how companies can apply this benefit to get better design in their plants and manufacture process, and eliminate waste. Key-words: Flexibility, Toyota Production System, Lean Manufacturing, Intelligent Plants, Wastes’ elimination.

  15. Irradiation's potential for preserving food

    International Nuclear Information System (INIS)

    Morrison, R.M.

    1986-01-01

    The first experimental studies on the use of ionizing radiation for the preservation of foods were published over thirty years ago (1, 2) . After a period of high expectations and perhaps exaggerated optimism a series of disappointments occurred in the late '60s .The first company specifically created to operate a food irradiation plant, Newfield Products Inc, ran into financial difficulties and had to close its potato irradiation facility in 1966. The irradiator, designed to process 15,000t of potatoes per month for inhibition of sprouting, was in operation during one season only. In 1968 the US Food an Drug Administration refused approval for radiation-sterilisation of ham and withdrew the approval it had granted in 1963 for irradiated bacon. An International Project on the Irradiation of Fruit and Fruit juices, created in 1965 at Seibersdorf, Austria, with the collaboration or 9 countries, ended with general disappointment after three years. The first commercial grain irradiator, built in the Turkish harbour town of Iskenderun by the International Atomic Energy Agency with funds from the United Nations Development Program, never received the necessary operating licence from the Turkish Government and had to be dismantled in 1968. The US Atomic Energy Commission terminated its financial support to all research programmes on food irradiation in 1970. For a number of years, little chance seemed to remain that the new process would ever be practically used. However, research and development work was continued in a number of laboratories all over the world, and it appears that the temporary setbacks now have been overcome. Growing quantities of irradiated foods are being marketed in several countries and indications are that irradiated foods will eventually be as generally accepted as are frozen, dried or heatsterilised foods

  16. Preservation of the Rotorua geysers

    International Nuclear Information System (INIS)

    Allia, R.G.; Lumb, T.

    1990-01-01

    This paper reports on the preservation of the Rotorua Geysers the geothermal activity at Rotorua, New Zealand, which has always been noted for its special cultural, tourist, and scientific values. A gradual increase in the drawoff of geothermal fluid through wells since the 1950s raised national concerns in the early 1980s when spring and geyser activity significantly declined. A government-funded monitoring program began in 1982 to establish the rate and cause of the decline in activity, as well as the magnitude of the drawoff. No new wells were permitted within 1.5 km of the geyser area. By late 1985, the monitoring program confirmed that drawdown of the geothermal field was linked to the drawoff by geothermal wells. It recommended that the drawoff could be reduced by 75% by well sharing and efficiency increases. The link between well discharges and the activity of thermal decline was disputed by the Rotorua Geothermal Users Association. By late 1986, the continuing decline in field pressure was considered to be serious, so the Government recommended compulsory closure of wells within 1.5 km of the geysers, and imposed a charging policy for geothermal usage elsewhere in Rotorua. The closures were battled in the High Court, and subsequently there was also considerable local resistance and publicity to the forced entry onto private land by authorities trying to cement up wells. The combination of enforced well closures, and what was considered by some to be punitive charges for geothermal usage, resulted in an 80% reduction in geothermal well discharges by late 1989. Some of hot spring activity has returned, and geyser activity is more intense. Recently, some residents have been concerned that cooled former thermal areas near houses may be heating up again, and that the well closures have also caused a dangerous build up in gas pressure near surface. This claim is presently being investigated

  17. The Use of Plant Antimicrobial Compounds for Food Preservation

    Science.gov (United States)

    Hintz, Tana; Matthews, Karl K.

    2015-01-01

    Foodborne disease is a global issue with significant impact on human health. With the growing consumer demand for natural preservatives to replace chemical compounds, plant antimicrobial compounds must be thoroughly investigated for their potential to serve as biopreservatives. This review paper will focus on the plant-derived products as antimicrobial agents for use in food preservation and to control foodborne pathogens in foods. Structure, modes of action, stability, and resistance to these plant compounds will be discussed as well as their application in food industries and possible technologies by which they can be delivered. Benefits as well as challenges, such as the need for further research for implementation and governmental regulation, will be highlighted. PMID:26539472

  18. Distributed Manufacturing of Flexible Products: Technical Feasibility and Economic Viability

    Directory of Open Access Journals (Sweden)

    Aubrey L. Woern

    2017-10-01

    , the upgrade needed to provide flexible filament capabilities can be accomplished with 37 average substitution flexible prints. This, again easily provides a triple digit return on investment printing one product a week. Although these savings, which are created by printing objects at home are substantial, the results also have shown the savings could be further increased to 93% when the use of a pellet extruder and TPE pellets, and 99% if recycled TPE filament made with a recyclebot is used. The capital costs of a recyclebot can be recovered in the manufacturing of about 9 kg of TPE filament, which can be accomplished in less than a week, enabling improved environmental impact as well as a strong financial return for heavy 3-D printer users.

  19. Elevate and Uterine Preservation: Two-Year Results.

    Science.gov (United States)

    Stanford, Edward J; Moore, Robert D; Roovers, Jan-Paul W R; VanDrie, Douglas M; Giudice, Thomas P; Lukban, James C; Bataller, Eduardo; Sutherland, Suzette E

    2015-01-01

    To evaluate efficacy of the Elevate Anterior and Apical (EAA) in the repair of pelvic organ prolapse (POP) when performed after previous hysterectomy and with or without uterine preservation during POP surgery. One hundred forty-two women with anterior vaginal prolapse and/or apical descent ≥ stage II were enrolled. The primary outcome was treatment failure defined as > stage II POP-Q during follow-up using the Last observed Failure Carried Forward method. Three sub-groups were analysed: baseline previous hysterectomy (N = 61); concomitant hysterectomy (N = 29), and preserved uterus/no hysterectomy (N = 51). Demographics, primary and secondary outcomes, and extrusion were compared between the groups. A P value less than 0.05 was considered statistically significant. Anatomic success shows significant and durable improvement at 24 months. The success for the apical compartment ranged between 93.8% and 100%. Success was slightly lower for the anterior compartment (70.8-89.1%). No statistically significant difference between the 3 subgroups. Age was the only patient characteristic to be found different between the 3 subgroups. In addition, there was no difference in overall intraoperative complications (P = 0.263). Mesh extrusion was found in all groups: 3 of 61 (4.9%) had previous hysterectomy; 4 of 29 (13.8%) had concomitant hysterectomy; and 1 of 51 (2.0%) had uterus preserved (P = 0.094). There appears to be a trend toward higher extrusion when a hysterectomy was performed with the EAA. Anatomic success and complications for the EAA do not appear to be significantly impacted when the uterus is removed before or during surgery or preserved. There may be a trend toward increased mesh extrusion when a hysterectomy is performed. However, larger cohort studies are needed to determine if concomitant hysterectomy impact extrusion.

  20. A Study of Flexible Composites for Expandable Space Structures

    Science.gov (United States)

    Scotti, Stephen J.

    2016-01-01

    Payload volume for launch vehicles is a critical constraint that impacts spacecraft design. Deployment mechanisms, such as those used for solar arrays and antennas, are approaches that have successfully accommodated this constraint, however, providing pressurized volumes that can be packaged compactly at launch and expanded in space is still a challenge. One approach that has been under development for many years is to utilize softgoods - woven fabric for straps, cloth, and with appropriate coatings, bladders - to provide this expandable pressure vessel capability. The mechanics of woven structure is complicated by a response that is nonlinear and often nonrepeatable due to the discrete nature of the woven fiber architecture. This complexity reduces engineering confidence to reliably design and certify these structures, which increases costs due to increased requirements for system testing. The present study explores flexible composite materials systems as an alternative to the heritage softgoods approach. Materials were obtained from vendors who utilize flexible composites for non-aerospace products to determine some initial physical and mechanical properties of the materials. Uniaxial mechanical testing was performed to obtain the stress-strain response of the flexible composites and the failure behavior. A failure criterion was developed from the data, and a space habitat application was used to provide an estimate of the relative performance of flexible composites compared to the heritage softgoods approach. Initial results are promising with a 25% mass savings estimated for the flexible composite solution.