Improvement of cavity performance in the Saclay/Cornell/DESY's SC cavities

International Nuclear Information System (INIS)

Kako, E.; Noguchi, S.; Ono, M.

2000-01-01

Development of 1.3 GHz Nb superconducting cavities for TESLA (TeV Energy Superconducting Linear Collider) has been carried out with international collaboration. Three Saclay single-cell cavities, one Cornell two-cell cavity and one DESY nine-cell cavity were sent to KEK in order to compare the cavity performance. These cavities were tested at KEK after the following surface treatment: 1) high pressure rinsing, HPR, 2) chemical polishing and HPR, 3) electropolishing and HPR. The test results, especially, improvement of the cavity performance due to electropolishing are reported in this paper. (author)

Health physics problems encountered in the Saclay linear accelerator

International Nuclear Information System (INIS)

Delsaut, R.

1979-01-01

The safety and health physics problems specific to the Saclay linear accelerator are presented: activation (of gases, dust, water, structural materials, targets); individual dosimetry; the safety engineering [fr

Long term performance of the superconducting cavities of the Saclay heavy ion linac

International Nuclear Information System (INIS)

Cauvin, B.; Desmons, M.; Girard, J.; Letonturier, P.

1993-12-01

The Saclay heavy ion superconducting linac has been in operation at full energy since mid 1989. The 50 independent superconducting helix resonators have now accelerated beams for more than 20000 hours. The long term performances of the linac, and more specifically of the superconducting R.F. technology, are discussed: vibrations of the resonators, cryostat design and operation, beam time, vacuum accidents, multipactor during operation due to small leaks, stability of the electric fields, cryogenics operation. 4 figs., 6 refs

Report transparency and nuclear safety 2007 CEA Saclay; Rapport transparence et securite nucleaire 2007 CEA Saclay

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

This report presents the activities of the CEA Center of Saclay for the year 2007. The actions concerning the safety, the radiation protection, the significant events, the release control and the environmental impacts and the wastes stored on the center are discussed. More especially two public consultation on release authorizations and the Neurospin installations, the dismantling of the 49 nuclear installation, the shutdown of the learning reactor ULYSSE are detailed. (A.L.B.)

The strontium-90 equilibrium parameters in Saclay soil; Les parametres d'equilibre du strontium 90 dans le sol de Saclay

Energy Technology Data Exchange (ETDEWEB)

Cohen, P; Gailledreau, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The equilibrium parameters of {sup 90}Sr in the presence of the following elements: Ca, Na, K, NH{sub 4} are measured in the soil at Saclay for each of the pairs Sr-Ca, Sr-Na, Sr-K, Sr-NH{sub 4}. The adsorption mechanism for Sr is studied in comparison with a synthetic resin which is a pure ion-exchanger. A preliminary study of a three component system; one being a tracer, is outlined. (author) [French] Les parametres d'equilibre du {sup 90}Sr en presence des elements suivants: Ca, Na, K, NH{sub 4} sont mesures sur le sol de Saclay pour chacun des couples Sr-Ca, Sr-Na, Sr-K, Sr-NH{sub 4}. Le mecanisme d'adsorption du Sr est etudie par comparaison avec une resine synthetique qui est un echangeur d'ions pur. Une etude preliminaire d'un systeme a trois composants, dont l'un est un traceur, est exposee. (auteur)

Superconducting magnet activities at CEN Saclay

International Nuclear Information System (INIS)

Lesmond, C.

1981-07-01

The activities in superconducting magnets at DPhPE/Saclay spread over a wide range from DC magnets mainly for particle and nuclear physics and also for other fields of research, pulsed magnets for particle accelerators and for a controlled fusion tokamak machine. The superconducting magnets designed during recent years involve a variety of conductor types, winding schemes, materials and cooling modes, including the use of superfluid helium. (author)

Review on use of neutron radiography at Saclay Nuclear Research Centre

Energy Technology Data Exchange (ETDEWEB)

Bayon, G [Saclay Nuclear Research Centre DRE/SRO, Gif-sur-Yvette (France)

1996-11-01

The Commissariat a l`Energie Atomique (CEA) operates three research reactors at Saclay. Each of them is equipped with a Neutron Radiology facility. Osiris is involved in studies of nuclear fuel rod behaviour during accidental events. The underwater NR facility allows to obtain images of the rods before and after power ramp. The Orphee installation is devoted to industrial application of NR including non destructive testing and real time imaging. The main activity concerns the examination of the pyrotechnic devices of the Ariane launcher programmes. Other areas of interest are also described. (author) 2 figs., 1 tab., 5 refs.

Review on use of neutron radiography at Saclay Nuclear Research Centre

International Nuclear Information System (INIS)

Bayon, G.

1996-01-01

The Commissariat a l'Energie Atomique (CEA) operates three research reactors at Saclay. Each of them is equipped with a Neutron Radiology facility. Osiris is involved in studies of nuclear fuel rod behaviour during accidental events. The underwater NR facility allows to obtain images of the rods before and after power ramp. The Orphee installation is devoted to industrial application of NR including non destructive testing and real time imaging. The main activity concerns the examination of the pyrotechnic devices of the Ariane launcher programmes. Other areas of interest are also described. (author) 2 figs., 1 tab., 5 refs

Study of electron groupings in the Saclay linear accelerator; Etude du groupement des electrons dans l'accelerateur lineaire de Saclay

Energy Technology Data Exchange (ETDEWEB)

Bergere, R; Veyssiere, A; Beil, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The classical theory of the linear accelerator buncher does not fit the experimental measurements of the shape of the bunch of electrons performed at Saclay by the method of the energy spectrum. If the spurious effect of the mode converter at the input of the linac is taken into account the theory can fit the experimental results and also explain the variations of the phase of the bunch on the accelerating sine wave. (authors) [French] Une etude classique du groupeur en tete de l'Accelerateur Lineaire de Saclav conduit a des resultats incompatibles avec les resultats experimentaux obtenus sur le groupement des electrons par l'etude du spectre des frequences rayonnees par le faisceau d'electrons ou par l'etude des spectres en energie. Par contre si l'effet parasite du convertisseur de mode a l'entree de l'accelerateur est pris en consideration les resultats theoriques coincident bien avec les resultats experimentaux et permettent en outre d'expliquer les variations du calage en phase des paquets elementaires d'electrons. (auteurs)

Packaging of radioactive sludges at the Saclay effluent processing plant

International Nuclear Information System (INIS)

Cerre, Pierre; Mestre, Emile; Bourdrez, Jean; Leconnetable, Jean

1964-10-01

The authors describe technical and technological aspects of the packaging workshop for radioactive sludges produced by processes of co-precipitation of Saclay effluents. This facility is an achievement of studies which aimed at improving working conditions for the plant staff. This workshop implements a process of solidification of filtered sludge by mixing with a hydraulic binding agent. After some generalities on the decontamination process applied to effluents produced by the Saclay research centre, the authors present and describe the adopted process, propose a physical description of the facility: building, chemical engineering equipment (filtration, packaging, and handling). They describe facility operation: introduction of a block into the cell, block filling, output of a packaged container. They briefly discuss the first results of facility exploitation [fr

The individual health physics at Saclay accelerators

International Nuclear Information System (INIS)

Brochen, J.C.; Delsaut, R.; Drouet, J.; Vialettes, H.; Zerbib, J.C.

1981-11-01

After giving a brief description of the Saturne synchrotron and the linear accelerator located on the Saclay site, the risks of irradiation in operation and on shut-down are reviewed and a description is given of the arrangements made for protection against radiation such as the shielding, access safety and the central monitoring of radiation. The irradiation statistics for the last few years are given [fr

Criticality Experiments Performed in Saclay and Valduc Centers, France (1958-2002)

International Nuclear Information System (INIS)

Barbry, F.; Grivot, P.; Girault, E.; Fouillaud, P.; Cousinou, P.; Poullot, G.; Anno, J.; Bordy, J.M.; Doutriaux, D.

2003-01-01

Since 1958, the Commissariat a l'Energie Atomique and then the Institut de Radioprotection et de Surete Nucleaire (previously the Institut de Protection et de Surete Nucleaire) have carried out criticality experiments first in Saclay and then in the Valduc criticality laboratory. This paper is a survey of the programs conducted during the last 45 yr with the different apparatuses. This paper also gives information about plans for the future. Programs are presented following the chronology and the International Criticality Safety Benchmark Evaluation Project classification. Among the numerous series of experiments, now 22 series (corresponding to 407 configurations) have been included in the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments'

(e,e'p) reactions at Saclay. Experimental aspects

International Nuclear Information System (INIS)

Mougey, J.

1978-01-01

Two high resolution, large solid angle and large momentum acceptance spectrometers are used since 1974 at the Saclay 600 MeV electron Linac ALS to perform coincidence (e,e'p) experiments, together with elastic and inelastic electron scattering. The essential features of this apparatus are given here. Some special problems concerning coincidence experiments are discussed

A new BETSI test bench at CEA/Saclay

International Nuclear Information System (INIS)

Nyckees, S.; Adroit, G.; Delferriere, O.; Duperrier, R.; Gauthier, Y.; Gobin, R.; Harrault, F.; Mateo, C.M.; Napoly, O.; Pottin, B.; Sauce, Y.; Senee, F.; Tuske, O.; Vacher, T.

2012-01-01

In the nineties, CEA has undertaken to develop the production of high intensity light ion beams from plasma generated by electron cyclotron resonance (ECR). Important results were obtained with the SILHI source in pulsed or continuous mode. Presently, CEA/Saclay is now involved in the construction of different injectors dedicated to large infrastructures like IFMIF or SPIRAL2. Other installations are also interested by high intensity ion sources like ESS or FAIR. To improve and test new sources, a new test bench named BETSI (Banc d'Etudes et de Tests des Sources d'Ions) has been operating for several years. Low energy beam line diagnostics consist of a Faraday cup, cameras and a species analyzer. The SILHI emittance scanner can also be installed on the beam line. On this test bench, different permanent magnet source configurations are tested. The paper is followed by the associated poster. (authors)

Treatment of Radioactive Effluents at the Saclay Nuclear Research Centre

Energy Technology Data Exchange (ETDEWEB)

Wormser, Gerald [Atomic Energy Commission, Saclay (France)

1960-07-01

Investigations have also been made at Saclay to find out if the soil at the Centre could be used to receive SNRC effluents. The Saclay plateau is a sand plateau 75 m thick on a clay base (2). Its upper surface is covered by a heterogeneous layer of clay containing pieces of grindstone of varying sizes. The ion-exchange capacity of this soil is considerable, 25 meq/100 g. Low-activity waste could therefore be discharged into it, especially since the plateau has no lateral water outcrops of any size and underground water does not reappear for a long time. This method of disposal is still only experimental. It was tested with a solution of Sr{sup 90} and tritium having an activity equal to the permitted levels.

The graphics software of the Saclay Linear Accelerator control system

International Nuclear Information System (INIS)

Gournay, J.F.

1988-01-01

The graphics software used for the control of the Saclay Linear Accelerator is described. The specific requirements that such a software must have in this environment are outlined and some typical applications are presented. (orig.)

Field emission studies at Saclay and Orsay

International Nuclear Information System (INIS)

Tan, J.

1996-01-01

During the last five years, DC and RF equipment for field emission studies have been developed at Saclay and Orsay laboratories. Combining these devices, straight comparison has been carried out between DC and RF field emission from artificial emission sites on the same sample. Other topics are also reviewed: high field cleaning, plausible origins of thermal effects that occurred on emission sites in RF, behaviour of alumina particles under RF field, and optical observations and measurements. (author)

Report transparency and nuclear safety 2007 CEA Saclay

International Nuclear Information System (INIS)

2007-01-01

This report presents the activities of the CEA Center of Saclay for the year 2007. The actions concerning the safety, the radiation protection, the significant events, the release control and the environmental impacts and the wastes stored on the center are discussed. More especially two public consultation on release authorizations and the Neurospin installations, the dismantling of the 49 nuclear installation, the shutdown of the learning reactor ULYSSE are detailed. (A.L.B.)

Physics landscape-fixed target energies

International Nuclear Information System (INIS)

Berger, E.L.

1989-10-01

An introductory review is presented of physics issues and opportunities at Fermilab fixed-target energies. Included are discussions of precision electroweak studies; deep inelastic lepton scattering; heavy quark production, spectroscopy, and decays; perturbative QCD; prompt photon production; massive lepton production; and spin dependence. 79 refs., 7 figs

The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay; Formation des scientifiques et des techniciens au Centre d'Etudes Nucleaires de Saclay

Energy Technology Data Exchange (ETDEWEB)

Debiesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' waeated (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author)Fren. [French] Les besoins considerables actuels et previsibles en chercheurs et scientifiques necessites par l'avevement de l'energie nucleaire imposaient au Commissariat a I'Energie atomique un effort particulier pour augmenter la formation quantitative et qualitative des scientifiques. Les moyens les plus divers ont ete mis en oeuvre: 1- Creation de l'Institut National des Sciences et Techniques Nucleaires par decret de la Presidence du Conseil et de l'Education Nationale en date du 18.6.57. Cet Institut d'Enseignement Superieur (250 etudiants) donne des cours en: genie atomique, mecanique quantique, theorie et technique des Accelerateurs de particules, metallurgie speciale, radiobiologie

Towards Energy Transition. Scientific workshop of 4 and 6 October 2016. Scientific synthesis of the 4 specialized sessions

International Nuclear Information System (INIS)

2016-10-01

University Paris-Saclay and the R and D of EDF Group organized on 4 and 5 October 2016, at EDF Lab Paris-Saclay, a scientific workshop with prospective vision and exchanges with companies: 'The University Paris-Saclay engine of the Energy Transition'. The workshop was preceded by a forum for students on the energy theme. For two days, major scientific topics were discussed in connection with the energy transition, through three types of exchanges between academics, researchers and students of the University Paris-Saclay and experts from the companies involved. The topics of the workshop were: Solar photovoltaic energy, Nuclear energy, Energy efficiency and flexibility, Electric mobility, Energy systems (including storage) and Energy control, interactions between Energy and Human and social sciences and between Energy and Digital. Scientific presentations and round tables involving researchers from the University Paris-Saclay and experts from companies were organised on prospective themes in order to compare the academic vision and the vision and needs of companies. A poster session that represents the research and innovation skills of the University Paris-Saclay, was highlighting the PhD students and young researchers. A forum for students aimed at presenting the training offer of the University Paris-Saclay on the energy theme. It offered facilitated meetings with companies for the training, orientation and professional integration of students. This document summarizes the scientific content of the four sessions: 1 - means and needs of photovoltaic solar energy, 2 - role of nuclear energy in the energy transition, 3 - new levers for industrial energy efficiency, 4 - electric-powered vehicles for what use?

Impact of fallout from Chernobyl on Saclay site

International Nuclear Information System (INIS)

1986-07-01

The fallout from Chernobyl accident have been monitored at Saclay Nuclear Research Center. The initial results from external irradiation measurement and analysis of environmental samples: air, fallout deposits, surface water, drinking water, underground water, food chain, are presented. The population radiation doses from external exposure to the plume, inhaled radioactivity and consumption of meat, milk and vegetables have been estimated. Special monitoring of internal contamination by iodine 131, cesium 134 and cesium 137 has been carried out using whole body counting [fr

A review of (e,e'p) data from Saclay

International Nuclear Information System (INIS)

Le Goff, J.M.; Bernheim, M.; Danel, J.F.; Jackson, H.E.; Meziani, Z.E.

1993-01-01

The last (e,e'p) results from the Saclay are reviewed. They include searches for a possible modification of the nucleon form factor when embedded in nuclear medium, this is 40 Ca and few-body nuclei; and also studies of two-body properties through the measurement of high proton momenta in 3 He and 4 He. The new electron facilities might open on these topics. (authors) 19 refs., 5 figs

Measurement of the vertical temperature gradient at the Saclay Nuclear Research Centre

International Nuclear Information System (INIS)

Santelli, F.; Le Quino, R.

1962-01-01

A 109 m mast has been erected at the Saclay Nuclear Research Centre for the precise measurement of thermal gradients and gaseous effluents. This note describes the temperature measurement devices (thermocouple and thermo-resistor) and the first results obtained

Experience acquired in health physics at Saclay Nuclear Research Establishment

Energy Technology Data Exchange (ETDEWEB)

Fitoussi, L.; Joffre, H.

1963-06-15

Description is given of the general organization and functions of the Health Physics Department of Saclay Nuclear Research Establishment. The means employed for the various installations covered and the general rules adopted for health physics are presented. From an overall survey of the results obtained in 1962, conclusions were drawn from past experience and to foresee improvements for the future are foreseen. (P.C.H.)

The graphics software of the Saclay linear accelerator control system

International Nuclear Information System (INIS)

Gournay, J.F.

1987-06-01

The Control system of the Saclay Linear Accelerator is based upon modern technology hardware. In the graphic software, pictures are created in exactly the same manner for all the graphic devices supported by the system. The informations used to draw a picture are stored in an array called a graphic segment. Three output primitives are used to add graphic material in a segment. Three coordinate systems are defined

Monitoring and control system of the Saclay electron linear accelerator

International Nuclear Information System (INIS)

Lafontaine, Antoine

1974-01-01

A description is given of the automatic monitoring and control system of the 60MeV electron linear accelerator of the Centre d'Etudes Nucleaires de Saclay. The paper is mostly concerned with the programmation of the system. However, in a real time device, there is a very close association between computer and electronics, the latter are therefore described in details and make up most of the paper. [fr

The use of an experimental device for disposal into the ground at the Centre d'Etudes Nucleaires at Saclay; Utilisation d'un dispositif experimental de rejet dans le sol au C.E.N. de Saclay

Energy Technology Data Exchange (ETDEWEB)

Amavis, R; Vaccarezza, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

This report presents the results of the {sup 3}H and {sup 90}Sr percolation tests carried out with Saclay soil, both in the laboratory in the ground itself. The extrapolation using the parameters introduced by Hiester and Vermeulen, as well as by W.J. Kaufman, appear satisfactory when the soil sample is homogeneous. (author) [French] Ce rapport presente les resultats d'essais de percolation de {sup 3}H et de {sup 90}Sr, realises avec le sol de Saclay, en laboratoire et sur le terrain. L'extrapolation utilisant les parametres introduits par Hiester et Vermeulen, ainsi que par W.J. Kaufman, parait satisfaisante lorsque le sol en place est homogene. (auteur)

ECR Light Ion Sources at CEA/Saclay%CEA/Saclay的ECR轻离子离子源

Institute of Scientific and Technical Information of China (English)

R.Gobin; P-A.Leroy; O.Tuske; D.Uriot; P-Y.Beauvais; A.Ben Ismail; D.Bogard; O.Delferriere; D.de Menezes; R.Duperrier; Y.Gauthier; F.Harrault

2007-01-01

In the beginning of the 90s,T.Taylor and his collaborators demonstrated ECR sources operating at low frequency (I.e.2.45GHz) are able to produce very intense single charge light ion beams.At CEA/Saclay,the SILHI source developments started in 1995.Since 1997 more than 100mA proton or deuteron beams are routinely produced in pulsed or continuous mode.To comply with ADS reliability constraint,important improvements have been performed to increase the installation reliability.Moreover,to optimize the beam transport in the low energy beam line,the extraction system was carefully designed and space charge compensation studies were undertaken.An important step has been reached in 2005 with the development of a permanent magnet source able to produce a total beam of 109mA at 85kV.A new test bench named BETSI,especially dedicated to permanent magnet source developments,is presently under construction.It will allow analysing positive or negative extracted beams up to 50keV and 100mA.In addition,for several years work has been done to optimize the production of negative hydrogen ion beam with such an ECR source.Recent analysis pushed towards the construction of a new set up based on a multicusp magnetic configuration.After a brief overview of the CEA/Saclay source developments,this article will point out on the recent results and present status.

High flux polarized neutrons triple-axis spectrometer: 2T (LLB-Saclay)

International Nuclear Information System (INIS)

Bourges, Ph.; Hennion, B.; Sidis, Y.; Boutrouille, Ph.; Baroni, P.

1999-01-01

A description of the performance of the newly designed thermal beam triple-axis spectrometer, 2T at LLB (Saclay) is given. The beam tube will be increased to 50 x 120 mm 2 (HxV) before the monochromator. A gain of about a factor 2 on the neutron flux at the monitor position is expected after this operation, scheduled on April/May 1999. Polarized neutrons beam option will be installed on this triple axis. The polarization is obtained using high quality heusler crystals recently grown at ILL. The size of both heusler monochromator and analyzer have been chosen to fully cover the beam size. The monochromator (analyzer) will be equipped with a vertical (horizontal) curvature. The flux of the polarized beam on the detector is then expected to be 5 times better than IN20 at ILL (best existing polarized neutrons triple-axis on thermal beam) with incident energy upto 75 MeV. (author)

Climatological study of Saclay site from 1958 to 1966. General climatology

International Nuclear Information System (INIS)

Levrard, Andre

1969-03-01

This document complements the CEA-N--0463 note with additional climatological measurements performed between 1963 and 1966 at the CEA Saclay centre, extending this survey over the 1958 to 1966 period. The duration, height, number of days and intensity of precipitations, the temperatures and vertical thermal gradient, the fog/mist and the wind direction and speed are reported monthly, seasonally and annually and presented in tables and diagrams

Studies on solid-state physics carried out with the Saclay reactor (1962); Etudes de physique du solide realisees a la pile de Saclay (1962)

Energy Technology Data Exchange (ETDEWEB)

Herpin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10{sup 13} n/cm{sup 2}, and - since 1958 - EL-3, whose central flux is equal ta 10{sup 14} n/cm{sup 2}. The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [French] Cet expose ne relate que des experiences de physique du solide faites sur des faisceaux sortis; plutot que de donner une revue de l'ensemble des travaux effectues, on ne cite que quelques etudes que l'on peut considerer comme plus essentielles ou mieux achevees. On utilise les faisceaux experimentaux des deux piles de Saclay, EL-2 dont le flux au centre est de 10{sup 13}n/cm{sup 2} et, depuis 1958, EL-3 pour laquelle il est egal a 10{sup 14} n/cm{sup 2}. Les experiences sont realisees par deux groupes de physiciens distincts, employant des techniques differentes, la diffraction des neutrons qui utilise un spectrometre a cristal, et la diffusion inelastique avec un spectrometre a temps de vol. (auteur)

Decision-making in crisis situation at the Cea Saclay by the real-time cartography of radiological consequences

International Nuclear Information System (INIS)

Comte, N.; Bourgeois, L.

2001-01-01

The S.P.R of Saclay has developed a computer system based around three modules: term sources calculation, transfers and radiological consequences in the installation based on a compartment model for the first one; dispersion and impact on environment based on a model with Doury type Gaussian fits with dose coefficients coming from the European directive 96/29, from the ICRP 71 and Kocher for the second one; cartography with the help of a geographical information system including road map background, a Saclay center plan with environment monitoring stations and the measurements points P.P.I. ( first intervention plan) on which are superposed the panache diffusion cone and the isodoses curves. (N.C.)

Meeting of Directors and Heads of Department from CEA-Saclay, France

CERN Multimedia

Patrice Loïez

2002-01-01

Directors and Heads of Department from the Saclay centre of the French atomic energy commission (CEA) visited CERN in December. They are pictured here at the LHC magnet test facility in building SM18. On the left behind the visitors are the test benches where magnets are prepared for installation in String 2: the 120-metre full-scale model of an LHC cell of the regular part of the arc, which can be seen to the right. Photos 01, 02: Left to right: Marc Dejardin, Alain Givernaud, Louis Laurent, François Kircher, Antoine Masurel, Joël Feltesse, André Menez, T. Taylor, Philippe Pradelles, Bernard Sevestre, Michel Roche, Jean-Yves Gascoin, Thierry Lieven, Michel Spiro, Jean-Pierre Pervès, Yves Lemoigne, Béatrice Reder, Georges Carola, Philippe Lebrun, Yves Bourlat, Bertrand Mercier, Jean-Paul Langlois, Patrick Laurent, Didier Moulin, Xavier Vitart, Marc Serre, Jean-Louis Pierrey, Patrick Jarry, Bruno Mansoulié, Stéphane Lequien, Hervé Barbelin, Philippe Pallier, Jean-Yves Guillamot, and Norbert Sioegel.

International Fusion Materials Irradiation Facility injector acceptance tests at CEA/Saclay: 140 mA/100 keV deuteron beam characterization

International Nuclear Information System (INIS)

Gobin, R.; Bogard, D.; Chauvin, N.; Chel, S.; Delferrière, O.; Harrault, F.; Mattei, P.; Senée, F.; Cara, P.; Mosnier, A.; Shidara, H.; Okumura, Y.

2014-01-01

In the framework of the ITER broader approach, the International Fusion Materials Irradiation Facility (IFMIF) deuteron accelerator (2 × 125 mA at 40 MeV) is an irradiation tool dedicated to high neutron flux production for future nuclear plant material studies. During the validation phase, the Linear IFMIF Prototype Accelerator (LIPAc) machine will be tested on the Rokkasho site in Japan. This demonstrator aims to produce 125 mA/9 MeV deuteron beam. Involved in the LIPAc project for several years, specialists from CEA/Saclay designed the injector based on a SILHI type ECR source operating at 2.45 GHz and a 2 solenoid low energy beam line to produce such high intensity beam. The whole injector, equipped with its dedicated diagnostics, has been then installed and tested on the Saclay site. Before shipment from Europe to Japan, acceptance tests have been performed in November 2012 with 100 keV deuteron beam and intensity as high as 140 mA in continuous and pulsed mode. In this paper, the emittance measurements done for different duty cycles and different beam intensities will be presented as well as beam species fraction analysis. Then the reinstallation in Japan and commissioning plan on site will be reported

Report on nuclear safety and transparency 2011 - Saclay

International Nuclear Information System (INIS)

2012-06-01

After a brief presentation of the Saclay CEA centre, this report indicates the different safety measures related to different risks, to emergency situations, to inspections and audits, and to nuclear base installations (INB). It describes measures related to radiation protection (organisation, personnel dosimetry) and some remarkable facts which occurred in 2011. It presents the different significant events which occurred in 2011 and were declared to the ASN. It discusses the results of measurements of liquid and gaseous releases from the installations and their impact on the environment. It addresses the radioactive wastes which are warehoused on the site (measures to limit their volume and to limit their impact on health and on the environment, notably on water and soils, types and quantities of wastes stored in INBs

Multiple exchange and high-energy fixed-angle scattering

CERN Document Server

Halliday, I G; Orzalesi, C A; Tau, M

1975-01-01

The application of the eikonal ansatz to fermion fermion elastic scattering with Abelian vector gluon exchanges is discussed. The behaviours of the elastic scattering amplitude and the elastic form factor are considered and an important mechanism for fixed angle high energy elastic scattering is identified. (6 refs).

The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay

International Nuclear Information System (INIS)

Debiesse, J.

1958-01-01

The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' was created (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author) [fr

The new control system of the Saclay linear accelerator

International Nuclear Information System (INIS)

Gournay, J.F.

1985-10-01

A new control system for the Saclay Linear Accelerator designed during the two past years is now in operation. The computer control architecture is based on 3 dedicated VME crates: one crate with a disk-based operating system runs the high level application programs and the database management facilities, another one manages the man-machine communications and the third one interfaces the system to the linac equipments. At the present time, communications between the VME micro-computers are done through 16 bit parallel links. The software is modular and organized in specific layers, the database is fully distributed. About 90% of the code is written in Fortran. The present status of the system is discussed and the hardware and software developments are described

Light ion source for proton/deuteron production at CEA Saclay for the Spiral2 project

Energy Technology Data Exchange (ETDEWEB)

Tuske, O.; Adroit, G.; Delferriere, O.; Denis, J-F.; Gauthier, Y.; Girardot, P.; Gobin, R.; Harrault, F.; Guiho, P.; Sauce, Y.; Uriot, D.; Vacher, T.; Van Hille, C. [CEA/Saclay, DSM/IRFU/SACM, F- 91191-Gif/Yvette (France); Graehling, P.; Hosselet, J.; Maazouzi, C. [IPHC, Institut Pluridisciplinaire Hubert Curien, Strasbourg (France)

2012-02-15

The production of rare radioactive ion beam (RIB) far from the valley of stability is one of the final purposes of the Spiral2 facility in Caen. The RIB will be produced by impinging a deuteron beam onto a carbon sample to produce a high neutron flux, which will interact with a uranium target. The primary deuteron beam is produced by an ion source based on ECR plasma generation. The deuteron source and the low energy beam transport (LEBT) has been assembled and tested at CEA Saclay. Diagnostics from other laboratories were implemented on the LEBT in order to characterize the deuteron beam produced and compare it to the initial simulations. The ion source has been based on a SILHI-type source, which has demonstrated good performances in pulsed and continuous mode, and also a very good reliability on long term operation. The 5 mA of deuteron beam required at the RFQ entrance is extracted from the plasma source at the energy of 40 kV. After a brief description of the experimental set-up, this article reports on the first beam characterization experiments.

A flexible dialogue with the computer in the control room of the Saclay's linac

International Nuclear Information System (INIS)

Bianchi, G.; Gourcy, G.; Gournay, J.F.; Jablonka, M.

1976-01-01

In the Control Room of the 600 MeV Electron Linac of Saclay (ALS) the use of a powerful visual display (including its own computer) allows to make very simple and flexible the dialogue of the operators with the main computer. As an example we describe a program permitting to select every number of parameters among 320 in order to assign them to one of the functions of the system. (author)

Non destructive testing: a unique R and D platform in Europe in Saclay

International Nuclear Information System (INIS)

On, Dinhill

2012-01-01

This article presents the 'Gerim 2' R and D platform which is dedicated to non destructive testing (NDT) in the field of information and communication technology (ICT). It is the first of its kind in Europe and is located in Saclay. It possesses a wide spectrum of NDT technologies: contactless ultrasonic testing, ultrasonic adaptive imagery, automated and multi-resolution X-ray tomography, etc. Founded by public research institutions and industrial partners, this centre is dedicated only to research and development

Report on transparency and nuclear safety 2015 - Saclay

International Nuclear Information System (INIS)

2016-06-01

This document proposes, first, a presentation of the Saclay CEA centre, of its activities and installations. Then it gives a rather detailed overview of measures related to safety and to radiation protection within these activities and installations. Next, it reports significant events related to safety and to radiation protection which occurred in 2015 and which have been declared to the French nuclear safety authority (ASN). It discusses the results of release measurements (liquid and gaseous effluents, radiological assessment, and chemical assessment for various installations) and the control of the chemical and radiological impact of these gaseous and liquid effluents on the environment. Finally, it addresses the issue of radioactive wastes which are stored in the different nuclear base installations of the Centre. It indicates the different measures aimed at limiting the volume of these warehoused wastes and addresses their impact on health and environment. Nature and quantities of warehoused wastes are specified. Remarks and recommendations of the Health, Safety and Working Conditions Committee (CHSCT) are given

Report on transparency and nuclear safety - Saclay - 2012

International Nuclear Information System (INIS)

2013-01-01

This report presents the different nuclear base installations (INB) of the Saclay CEA centre, gives an overview of measures regarding safety within these installations (organisation, technical general arrangements, technical arrangements related to different risks, management of emergency situations, inspections, audits and second-level controls, arrangements and main events specific to the different installations and buildings) and of measures related to radiation protection (organisation and dosimetry results, internal dosimetry). It reports the significant events related to safety and radiation protection which occurred in 2012 and were declared to the ASN. It reports and comments the results of measurements of gaseous and liquid effluents, of their impact on the environment, and of surveys of the environment. The next part addresses the management of radioactive wastes which are warehoused on this site: arrangements aimed at limiting their volume, and at limiting their impact on health and on the environment, nature and quantities of warehoused wastes. Remarks and recommendations of the CHSCT are given

Control program of the neutron four-circle-diffractometer P110 at the ORPHEE reactor/CEN Saclay

International Nuclear Information System (INIS)

Guth, H.; Paulus, H.; Reimers, W.; Heger, G.

1984-05-01

The four-circle diffractometer P110 for elastic neutron scattering on single crystals was installed at the ORPHEE reactor/CEN Saclay in 1982. The control progam, presented here, is a new update of the former program versions used at the FR2 reactor. Important improvements concerning reliability and handling of the diffractometer are added. (orig./HP) [de

Decision no 2009-DC-0155 of the 15. of September 2009 by the Nuclear Safety Authority specifying the limits of releases in the environment of liquid and gaseous effluents of base nuclear installations n. 18, 35, 40, 49, 50, 72, 77 and 101 operated by the Atomic Energy Commissariat (CEA) in its Saclay Centre, located on the districts of Saclay, Saint-Aubin and Villiers-le-Bacle (Essonne department)

International Nuclear Information System (INIS)

2009-01-01

This document contains references to the different legal and official documents (codes, orders, minister's opinion, public surveys, administrative authorizations, local community opinion) at the root of this specification of limits related to releases in the environment of liquid and gaseous effluents of base nuclear installations of the Saclay Centre operated by the Atomic Energy Commissariat (CEA). Tables present the limits for different radioactive emissions (carbon 14, hydrogen 3, iodine, radioactive rare earths, and other alpha, beta and gamma emitters) from these different installations, but also the maximum admitted concentrations for gaseous chemical effluents (HCl, HF, NOx, CO, and so on), as well as limits for thermal releases

Plan for mass accelerator spectrometry at Gif-sur-Yvette and Saclay

International Nuclear Information System (INIS)

Berthier, B.; Bianchi, L.; Delibrias, G.; Koechlin, Y.

1981-05-01

From early 50', a carbon 14 dating laboratory was created at the Centre des Faibles Radioactivites de Gif-sur-Yvette (C.F.R.). From this time, more than 5,000 archaeological and geological samples were measured with the Libby method by this laboratory. C.F.R. is in the way to actualize its dating activities with the new accelerator method. A 3 MV General Ionex Tandetron is planed to be located at Gif-sur-Yvette next year and shared with Orsay University for 14 C. 10 Be and 36 Cl mass spectroscopy measurement. During the same time attempts have been made to adapt the Super FN Tandem of the Centre d'Etudes Nucleaires de Saclay for 14 C dating

The 600 MeV Saclay electron linac: 40000 hour operation

International Nuclear Information System (INIS)

Netter, F.

1977-01-01

After 40000 hours of operation, the 600 MeV Saclay's electron linac (ALS) does appear as an efficient and versatile tool, for high resolution work (20 μA in ΔE = 40 keV at E = 200MeV), for high power pion production (300 μA in 20 μs pulses at 1000 Hz and 400 MeV or 240 μA in 4 μs pulses at 3000 Hz and 390 MeV), for highly reliable positron beams acceleration, a.s.o. Main improvements made in the recent years are described in particular the automatic beam switching between any two ways among the beam handling system; and the computer newly installed in the control room with a powerful visual display allowing an easy and flexible dialogue of the operators with the computer [fr

Energy conservation assessment of fixed-asset investment projects: An attempt to improve energy efficiency in China

International Nuclear Information System (INIS)

Hu Yuan

2012-01-01

Fast economic growth in China has generated energy and environmental problems. Fixed-asset investments have contributed significantly to energy consumption. In China, an energy conservation assessment (ECA), a mechanism similar to the existing environmental impact assessment (EIA), has been applied to improve the energy efficiency of new fixed-asset investment projects. In this paper the origin and development of the ECA system is analyzed and the major features of ECA are discussed. To identify the success and failure of the ECA system, case studies are analyzed and comparison between ECA and EIA, which has been used in China for over 30 years, is made. Based on the analysis, recommendations are provided for the improvement of the ECA system in China. Despite the ECA system only being established for a relatively short time, it has clearly achieved significant success. With further efforts it could play an important role in achieving the goals of improving China’s energy efficiency and reducing green house gas emissions. - Highlights: ► We examine origin and development of energy conservation assessment (ECA) in China. ► ECA has great potential in energy efficiency improvement and GHGs reduction. ► Compared with EIA, ECA is still in its early stages. More efforts are needed. ► Improvements of legal system, assessment procedure, etc. are essential for next step.

The atomic energy course of the 'Institut National des Sciences et Techniques nucleaires' at the centre d'Etudes Nucleaires at Saclay; L'enseignement de genie atomique de l'Institut national des Sciences et Techniques nucleaires au Centre d'Etudes nucleaires de Saclay

Energy Technology Data Exchange (ETDEWEB)

Baissas, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

1- Reasons for its creation. The Electricite de France, and industries interested in the development of atomic energy, have requested the Commissariat a l'Energie atomique to train scientists who will be able to study pile planning and to be in charge of their construction. 2- Recruiting and enrolment fees. The demand for enrolment has always exceeded the possibilities. This year the courses have been attended by 74 permanent students, including 20 foreigners, and some hundred part-time listeners. All students are already scientists or have high university qualifications. Enrot fees: 250 000 F for students, 125 000 F for part-time attendance. 3- Organisation of the teaching. This consists of two branches: physics and chemistry, and in each branch: some hundred lectures, some thirty sessions of practical work, periods of work in the departments, study of a reactor project by a group of 4 or 5 students. The course takes place during the university year 1 november to 14 july. 4- Qualifications. A final examination, combining the results from two theoretical tests, from the practical work, from the period of work in the establishment and from the reactor project leads to a diploma in atomic energy. In reality new scientists are not produced, a new mention is merely added to a diploma already held. Results have always been excellent; the percentage of failures is very small. 5- Placing of graduates. They all return to their original industries, who have paid their salaries and enrolment fees whilst giving up their services during the 9 months duration of the course. 6- Similar ventures. A similar course has been created at the C.F.N. Grenoble. Whilst the Saclay course is particularly for scientists already working, that at Grenoble is destined in principle for young scientists leaving college. 7- Conclusion. This organization is satisfactory both for the students and the industries. The C.E.A. works towards yearly improvement, and hopes to welcome large numbers of

Report on the visit to Saclay related to the VISA-2 Project, 13.XI - 13. XII 1961

International Nuclear Information System (INIS)

Milasin, N.

1963-01-01

This report describes the activities of the Department for construction materials in Saclay visited by the author. This department deals with both irradiated and unirradiated materials, namely Zirconium, stainless steels, Beryllium which are used for fabrication of fuel element claddings and tubes to be used under reactor conditions. Mechanical properties of these materials are performed by applying different experimental techniques

The quasi-monochromatic photon beam used in photoneutron experiments from 20-120 MeV at the 600 MeV Saclay Linac

International Nuclear Information System (INIS)

Veyssiere, A.; Beil, H.; Bergere, R.; Carlos, P.; Fagot, J.; Lepretre, A.; Ahrens, J.

1979-01-01

A beam of 20-130 MeV positrons, with average intensities between 10 nA and 50 nA, is used at the 600 MeV Saclay Linac to create a quasi-monochromatic photon beam with a continuously variable energy. This beam was used to measure photoneutron cross sections and the corresponding photonuclear facility is first described. The computer-controlled methods, implemented to measure the energy spectrum and the emittance of the positron beam are described. The quasi-monochromatic photon lines are produced by the annihilation in flight of monoenergetic positrons in two annihilation radiators with different Z successively. The photon beam emission angle theta is shown to be the most critical parameter in the search for an optimum overall signal to background ratio for a specific photoneutron experiment. The choice of an angle theta approximately 4 0 is explained for absolute measurements of sigma(γ, xn) cross-sections, for which the used average intensities of monochromatic photons were thus purposely reduced to approximately 5 X 10 3 s -1 , with an energy resolution approximately 12%. (Auth.)

SmartFix: Indoor Locating Optimization Algorithm for Energy-Constrained Wearable Devices

Directory of Open Access Journals (Sweden)

Xiaoliang Wang

2017-01-01

Full Text Available Indoor localization technology based on Wi-Fi has long been a hot research topic in the past decade. Despite numerous solutions, new challenges have arisen along with the trend of smart home and wearable computing. For example, power efficiency needs to be significantly improved for resource-constrained wearable devices, such as smart watch and wristband. For a Wi-Fi-based locating system, most of the energy consumption can be attributed to real-time radio scan; however, simply reducing radio data collection will cause a serious loss of locating accuracy because of unstable Wi-Fi signals. In this paper, we present SmartFix, an optimization algorithm for indoor locating based on Wi-Fi RSS. SmartFix utilizes user motion features, extracts characteristic value from history trajectory, and corrects deviation caused by unstable Wi-Fi signals. We implemented a prototype of SmartFix both on Moto 360 2nd-generation Smartwatch and on HTC One Smartphone. We conducted experiments both in a large open area and in an office hall. Experiment results demonstrate that average locating error is less than 2 meters for more than 80% cases, and energy consumption is only 30% of Wi-Fi fingerprinting method under the same experiment circumstances.

The optimum energy harvest efficiency of nitrogen fixing hydrophyte: Azolla pinnata

Energy Technology Data Exchange (ETDEWEB)

Tennakone, K. (Institute of Fundamental Studies, Kandy (LK) Ruhuna Univ., Matara (LK). Dept. of Physics); Punchihewa, S.; Jayasuriya, A.C. (Institute of Fundamental Studies, Kandy (LK))

1989-01-01

Azolla is a nitrogen fixing hydrophyte that can be cultivated in absence of nitrogenous fertilizer. It is found that when biomass is continuously harvested from a culture of Azolla, solar energy can be converted at an optimum efficiency of 1.1%. (author).

Fixed-target particle fluxes and radiation levels at SSC energies

International Nuclear Information System (INIS)

Dukes, E.C.

1993-01-01

The author calculates the charged particle fluxes and radiation doses from minimum ionizing particles (MIP), electromagnetic showers, and hadronic showers, in a fixed-target experiment at the SSC. This work follows the work of Groom, essentially boosting his results into the laboratory frame. The radiation in dense matter, such as a calorimeter, is produced by several sources: electromagnetic showers, hadronic showers, and minimum ionizing particles. The author does not consider other sources of radiation such as beam halo, a dependent effects, and low energy neutrons from secondary sources. Nor does he consider the effects of magnetic fields. Low energy neutrons have been shown to be an important source of radiation for collider experiments at the SSC. In fixed-target experiments, where the spectrometer is more open and where most detector elements are far away from secondary particle dumps, these sources are not as important. They are also very much detector and experimental hall dependent. Hence the results presented here are only a lower limit of the estimated radiation dose

Studies on solid-state physics carried out with the Saclay reactor (1962)

International Nuclear Information System (INIS)

Herpin, A.

1962-01-01

This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10 13 n/cm 2 , and - since 1958 - EL-3, whose central flux is equal ta 10 14 n/cm 2 . The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [fr

Maximizing Energy Capture of Fixed-Pitch Variable-Speed Wind Turbines

Energy Technology Data Exchange (ETDEWEB)

Pierce, K.; Migliore, P.

2000-08-01

Field tests of a variable-speed, stall-regulated wind turbine were conducted at a US Department of Energy Laboratory. A variable-speed generating system, comprising a doubly-fed generator and series-resonant power converter, was installed on a 275-kW, downwind, two-blade wind turbine. Gearbox, generator, and converter efficiency were measured in the laboratory so that rotor aerodynamic efficiency could be determined from field measurement of generator power. The turbine was operated at several discrete rotational speeds to develop power curves for use in formulating variable-speed control strategies. Test results for fixed-speed and variable-speed operation are presented along with discussion and comparison of the variable-speed control methodologies. Where possible, comparisons between fixed-speed and variable-speed operation are shown.

The use of an experimental device for disposal into the ground at the Centre d'Etudes Nucleaires at Saclay

International Nuclear Information System (INIS)

Amavis, R.; Vaccarezza, J.

1960-01-01

This report presents the results of the 3 H and 90 Sr percolation tests carried out with Saclay soil, both in the laboratory in the ground itself. The extrapolation using the parameters introduced by Hiester and Vermeulen, as well as by W.J. Kaufman, appear satisfactory when the soil sample is homogeneous. (author) [fr

Simultaneous analysis with respect to time and energy of a linear electron accelerator beam; Analyse simultanee en temps et en energie du faisceau d'un accelerateur lineaire d'electrons

Energy Technology Data Exchange (ETDEWEB)

Garganne, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

A system is described for displaying on an oscilloscope screen the energy spectrum of the electrons located in time at a particular moment of the total electron pulse accelerated by a linac. The shaping transistor circuitry is particularly described. Some examples are given concerning the experimental results observed with such a system at the Saclay Linac. (author) [French] On decrit un systeme d'affichage sur un ecran d'oscilloscope, du spectre en energie des electrons sortant de l'accelerateur a un instant variable dans l'impulsion totale acceleree, insistant sur les circuits a transistors de mise en forme des impulsions. On donne quelques exemples de resultats obtenus sur l'accelerateur lineaire de Saclay. (auteur)

The Standard Temperature Calibration Center of the CEN Saclay

International Nuclear Information System (INIS)

Liermann, J.

1978-01-01

The first part of this article describes the instruments available at the Standard Temperature Calibration Center of the CEN Saclay. At the moment the Center has been approved by the BNM to make calibrations between 0 and 1050 0 C, but the Center has recently developed some ovens which will allow calibrations up to 2000 0 C. The Center can also perform thermal and mechanical tests on detector components under the influence of external factors. The second part concerns the development of platinum-resistance high temperature thermometer. The calibrations by comparison between 0 and 1000 0 C are, at the moment, made by using platinum resistance thermometer as a reference up to 630 0 C and a platinum-rhodied/platinum thermocouple above 630 0 C. The use of only one reference could represent for a calibration center a great improvement. For this reason a platinum-resistance high temperature thermometer has been developed. Great care was taken during the conceptual design and during the selection and the assembly of each component [fr

Energy efficient smartphone-based activity recognition using fixed-point arithmetic

OpenAIRE

Anguita, Davide; Ghio, Alessandro; Oneto, Luca; Llanas Parra, Francesc Xavier; Reyes Ortiz, Jorge Luis

2013-01-01

In this paper we propose a novel energy efficient approach for the recognition of human activities using smartphones as wearable sensing devices, targeting assisted living applications such as remote patient activity monitoring for the disabled and the elderly. The method exploits fixed-point arithmetic to propose a modified multiclass Support Vector Machine (SVM) learning algorithm, allowing to better pre- serve the smartphone battery lifetime with respect to the conventional flo...

Review of the inverse scattering problem at fixed energy in quantum mechanics

Science.gov (United States)

Sabatier, P. C.

1972-01-01

Methods of solution of the inverse scattering problem at fixed energy in quantum mechanics are presented. Scattering experiments of a beam of particles at a nonrelativisitic energy by a target made up of particles are analyzed. The Schroedinger equation is used to develop the quantum mechanical description of the system and one of several functions depending on the relative distance of the particles. The inverse problem is the construction of the potentials from experimental measurements.

Growth and energy nexus in Europe revisited: Evidence from a fixed effects political economy model

International Nuclear Information System (INIS)

Menegaki, Angeliki N.; Ozturk, Ilhan

2013-01-01

This is an empirical study on the causal relationship between economic growth and energy for 26 European countries in a multivariate panel framework over the period 1975–2009 using a two-way fixed effects model and including greenhouse gas emissions, capital, fossil energy consumption, Herfindahl index (political competition) and number of years the government chief executive stays in office (political stability) as independent variables in the model. Empirical results confirm bidirectional causality between growth and political stability, capital and political stability, capital and fossil energy consumption. Whether political stability favors the implementation of growth or leads to corruption demands further research. - Highlights: • Economic growth and energy for 26 European countries is examined. • Two-way fixed effects model with political economy variables is employed. • Bidirectional causality is observed between growth and political stability

Construction of two-dimensional Schrodinger operator with given scattering amplitude at fixed energy

International Nuclear Information System (INIS)

Novikov, R.G.

1986-01-01

The classical necessary properties of the scattering amplitude (reciprocity and unitarity) are, provided its L 2 norm is small, sufficient for the existence of a two-dimensional Schrodinger operator with the given scattering amplitude at fixed energy

Design of low energy ring(s)

CERN Document Server

Lachaize, Antoine

During the last two years, several upgrades of the initial baseline scenario were studied with the aim of increasing the average intensity of ion beams in the accelerator chain of the Beta Beam complex. This is the reason why the Rapid Cycling Synchrotron (RCS) specifications were reconsidered many times [1], [2], [3].General considerations on the optical design were presented at the Beta Beam Task Meetings held at CERN and at Saclay in 2005 [4]. More detailed beam optics studies were performed during the next months. Lattices, RF system parameters, multi-turn injection scheme, fast extraction, closed orbit correction and chromaticity correction systems were proposed for different versions of the RCS [5], [6], [7].Finally, the RCS specifications have stabilized in November 2006 after the fourth Beta Beam Task Meeting when it was decided to fix the maximum magnetic rigidity of ion beams to 14.47 T.m (3.5 GeV equivalent proton energy) and to adopt a ring physical radius of 40 m in order to facilitate injectio...

Fixed target physics at high energies

International Nuclear Information System (INIS)

Kirk, T.B.

1984-01-01

The number and type of fixed target experiments that can be pursued at a proton synchrotron are very large. The advent of the Fermilab superconducting accelerator, the Tevatron, will extend and improve the results which are given here from recent CERN and Fermilab experiments. The sample of experiments given in this paper is neither meant to be inclusive nor intensive. Hopefully, it will give the flavor of contemporary fixed target physics to a predominantly cosmic ray oriented audience. (author)

Upper bounds on the relative energy difference of pure and mixed Gaussian states with a fixed fidelity

International Nuclear Information System (INIS)

Dodonov, V V

2012-01-01

Exact and approximate formulas for the upper bound of the relative energy difference of two Gaussian states with a fixed fidelity between them are derived. The reciprocal formulas for the upper bound of the fidelity for the fixed value of the relative energy difference are also obtained. The bounds appear higher for pure states than for mixed ones, and their maximal values correspond to squeezed vacuum states. In particular, to guarantee the relative energy difference less than 10%, for quite arbitrary Gaussian states, the fidelity between them must exceed the level 0.998866. (fast track communication)

A singular perturbation limit of diffused interface energy with a fixed contact angle condition

OpenAIRE

Kagaya, Takashi; Tonegawa, Yoshihiro

2016-01-01

We study a general asymptotic behavior of critical points of a diffused interface energy with a fixed contact angle condition defined on a domain $\\Omega \\subset \\mathbb{R}^n$. We show that the limit varifold derived from the diffused energy satisfies a generalized contact angle condition on the boundary under a set of assumptions.

Comparative analysis of fixed and sun tracking low power PV systems considering energy consumption

International Nuclear Information System (INIS)

Lazaroiu, George Cristian; Longo, Michela; Roscia, Mariacristina; Pagano, Mario

2015-01-01

Highlights: • Photovoltaic system prototype with sun tracking. • Energy analysis of fixed and sun tracking built prototypes. • Experimental tests in different environmental conditions. • Theoretical and experimental validation of the prototype. - Abstract: Photovoltaic technology allows to directly convert solar energy into electrical energy with clear advantages: no environmental impact during operation, reliability and durability of the systems, reduced operating costs and maintenance, ability to both supply remote customers and simply connect to the electrical network. This paper evaluates the performance of two photovoltaic systems: one fixed and one equipped with a sun tracker. The objective of this research is to analyze the increase of daily produced energy by using the sun tracking system. The analysis accounts also the energy consumption of the sun tracker. An analytical approach is proposed. To validate the results through experimental tests, two alternative low power PV systems were built. Each system consists of a PV source, a MPPT (Maximum Power Point Tracker) power converter and a 12 V–40 A h electrochemical battery, which is used as electric load. The sun tracker system evidenced an important growth of power production during morning and evening

Simplified solutions of the Cox-Thompson inverse scattering method at fixed energy

International Nuclear Information System (INIS)

Palmai, Tamas; Apagyi, Barnabas; Horvath, Miklos

2008-01-01

Simplified solutions of the Cox-Thompson inverse quantum scattering method at fixed energy are derived if a finite number of partial waves with only even or odd angular momenta contribute to the scattering process. Based on new formulae various approximate methods are introduced which also prove applicable to the generic scattering events

Maximizing the spectral and energy efficiency of ARQ with a fixed outage probability

KAUST Repository

Hadjtaieb, Amir

2015-10-05

This paper studies the spectral and energy efficiency of automatic repeat request (ARQ) in Nakagami-m block-fading channels. The source encodes each packet into L similar sequences and transmits them to the destination in the L subsequent time slots. The destination combines the L sequences using maximal ratio combining and tries to decode the information. In case of decoding failure, the destination feeds back a negative acknowledgment and then the source sends the same L sequences to the destination. This process continues until successful decoding occurs at the destination with no limit on the number of retransmissions. We consider two optimization problems. In the first problem, we maximize the spectral efficiency of the system with respect to the rate for a fixed power. In the second problem, we maximize the energy efficiency with respect to the transmitted power for a fixed rate. © 2015 IEEE.

Studies on utilization of nitrogen-fixing bacteria for saving energy; Chisso koteikin no katsuyo ni yoru sho energy no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Uozumi, T; Koyama, R; Horiuchi, M; Hidaka, M; Masaki, H [The University of Tokyo, Tokyo (Japan); Shigematsu, T; Inoue, A [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

1997-02-01

This paper describes analysis and enhancement of nitrogen-fixing gene of rice root bacteria, such as Klebsiella oxytoca, Azospirillum lipoferumn and Sphingomonas paucimobilis, for realizing energy saving through conservation of nitrogenous fertilizers. For K. oxytoca, modified strain R-16 was developed, which can fix nitrogen effectively even in the presence of NH4{sup +}. Nitrogen-fixing ability of A. lipoferumn depends on the activity control by the modification of nitrogen-fixing enzyme as well as on the adjustment of transcription level by the transcription activating gene, nifA. The control gene relating to the above was analyzed by making clones. As a result, a modified strain TAl without the control by NH4{sup +} was developed. The R-16 and TAl strains were inoculated into rice sterile-cultured without nitrogen. Consequently, inoculated strains were settled in the root, which resulted in the increased vegetation weight of plant to two times heavier than that without inoculation. 9 refs.

Saclay Center of Nuclear Studies, Direction of Materials and Nuclear Fuels, Department of Physico-Chemistry, Division of Physical Chemistry. 1968 Annual report

International Nuclear Information System (INIS)

Schmidt, M.; Clerc, M.; Le Calve, J.; Bourene, M.; Lesigne, B.; Gillois, M.; Devillers, C.; Arvis, M.; Gilles, L.; Moreau, M.; Sutton, J.; Faraggi, M.; Desalos, J.; Tran Dinh Son; Barat, F.; Hickel, B.; Chachaty, C.; Forchioni, A.; Shiotani, M.; Larher, Y.; Maurice, P.; Le Bail, H.; Nenner, T.

1969-03-01

This document is the 1968 annual report of research activities at the Physico-Chemistry Department (Physical Chemistry Division), part of the Directorate of Materials and Nuclear Fuels of the CEA Saclay center of nuclear studies. The report is divided into two main parts: radiolysis and photolysis studies (gaseous phase, condensed phase), and general physico-chemical studies (sorption, molecular jets)

Flexible and stable heat energy recovery from municipal wastewater treatment plants using a fixed-inverter hybrid heat pump system

International Nuclear Information System (INIS)

Chae, Kyu-Jung; Ren, Xianghao

2016-01-01

Highlights: • Specially designed fixed-inverter hybrid heat pump system was developed. • Hybrid operation performed better at part loads than single inverter operation. • The applied heat pump can work stably over a wide range of heat load variations. • Heat energy potential of treated effluent was better than influent. • The heat pump’s COP from the field test was 4.06 for heating and 3.64 for cooling. - Abstract: Among many options to improve energy self-sufficiency in sewage treatment plants, heat extraction using a heat pump holds great promise, since wastewater contains considerable amounts of thermal energy. The actual heat energy demand at municipal wastewater treatment plants (WWTPs) varies widely with time; however, the heat pumps typically installed in WWTPs are of the on/off controlled fixed-speed type, thus mostly run intermittently at severe part-load conditions with poor efficiency. To solve this mismatch, a specially designed, fixed-inverter hybrid heat pump system incorporating a fixed-speed compressor and an inverter-driven, variable-speed compressor was developed and tested in a real WWTP. In this hybrid configuration, to improve load response and energy efficiency, the base-heat load was covered by the fixed-speed compressor consuming relatively less energy than the variable-speed type at nominal power, and the remaining varying load was handled by the inverter compressor which exhibits a high load-match function while consuming relatively greater energy. The heat pump system developed reliably extracted heat from the treated effluent as a heat source for heating and cooling purposes throughout the year, and actively responded to the load changes with a high measured coefficient of performance (COP) of 4.06 for heating and 3.64 for cooling. Moreover, this hybrid operation yielded a performance up to 15.04% better on part loads than the single inverter operation, suggesting its effectiveness for improving annual energy saving when

Procedures and techniques for monitoring the radiation detection, signalization and alarm systems in the centralized ambience monitoring systems of the basic nuclear facilities of the CEN Saclay

International Nuclear Information System (INIS)

Andre, J.-J.; Drouet, J.; Leblanc, P.

1979-01-01

After referring to the regulations governing the 'systematic ambience monitoring' in the basic nuclear facilities, the main radiation detection, signalization and alarm devices existing at present in these facilities of the Saclay Nuclear Study Centre are described. The analysis of the operating defects of the measuring channels and detection possibilities leads to the anomalies being classified in two separate groups: the anomalies of the logical 'all or nothing' type of which all the possible origins are integrated into a so-called 'continuity' line and the evolutive anomalies of various origins corresponding to poor functioning extending possibly to a complete absence of signal. The techniques for testing the detection devices of the radiation monitoring board set up in the 'Departement de Rayonnements' at the Saclay Nuclear Study Centre are also described [fr

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar; Alouini, Mohamed-Slim; Chen, Yunfei; Radaydeh, Redha M.

2012-01-01

In this letter, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized

Inauguration of the international Institute of the nuclear energy

International Nuclear Information System (INIS)

Anon.

2011-01-01

On June 27, 2011 was inaugurated in Saclay (France) the I2EN (international Institute of the nuclear energy) and the Jannus platform. The I2EN has to particularly centralize and relay, at the international scale, the French formations offer in the field of nuclear energy. On the other hand, the Jannus platform is an example of cooperation between research organisms and universities. (O.M.)

Fixed energy inversion of 5 eV e-Xe atom scattering

International Nuclear Information System (INIS)

Lovell, A.; Amos, K.

2000-01-01

Fixed energy inverse scattering theory has been used to define central and spin-orbit Schroedinger potentials for the scattering of 5 eV polarized electrons from Xe atoms. The results are typical for a range of such data; including energies above threshold when the potentials become complex. The phase shifts obtained from an analysis of the measured differential cross section and analyzing power has been used as input data. Both semi-classical (WKB) and fully quantal inversion methods have been used to extract central and spin-orbit interactions. The analysis shows that information additional to the set of input phase shifts extracted from this (and similar) data may be needed to ascertain physical potentials

Fabrication and tests and RF control of the superconducting resonators of the Saclay heavy ion LINAC

International Nuclear Information System (INIS)

Cauvin, B.; Coret, M.; Fouan, J.P.; Girard, J.; Girma, J.L.; Leconte, P.; Lussignol, Y.; Moreau, R.; Passerieux, J.P.; Ramstein, G.; Wartski, L.

1987-01-01

Two types of niobium superconducting resonators used in the Saclay linac are discussed. The outer cylinder and RF ports are identical for the two designs, but internal structures are different: full wave helix with three gaps behavior; or half wave with two gaps behavior. All cavities (34 full wave, 16 half) were tested for field and mounted in the machine cryostats. Cavity fabrication and performance are summarized. Vibration tests and Rf control are described. It is argued that helix resonators can overcome problems due to vibration. The very low lock out time percentage measured in an acceleration test with 21 cavities supports this confidence

Decree no. 2004-48 from January 12, 2004 authorizing the French atomic energy commission to proceed to the definitive decommissioning and dismantling operations of the nuclear facility no. 43, named Saclay linear accelerator (ALS), on the territory of Saint-Aubin town (Essonne)

International Nuclear Information System (INIS)

2004-01-01

The linear accelerator of Saclay (ALS) has been the object of a commissioning permission given by decree by the French prime minister in October 8, 1965. It is submitted to the regime of basic nuclear facilities as defined in the decree no. 63-1228 from December 11, 1963. The French atomic energy commission (CEA) put down a request for the definitive decommissioning and dismantling of this facility on May 30, 2002. The duration foreseen for these operations is of 4 years. After the safety examination of the request by the DGSNR and the institute of radioprotection and nuclear safety (IRSN), a favorable and conformable advice has been given by the different ministries (health, finances and industry, ecology and sustainable development) and has led to this decree which precises the different protection measures to be implemented during the dismantling work. (J.S.)

Evaluating training and information to teachers on nuclear energy

International Nuclear Information System (INIS)

Le Bail, H.

1994-01-01

Teachers in Physics Sciences in French secondary level schools have received, during their formation, little information on radioactivity and nuclear energy; nevertheless, they have a serious knowledge of energy topics and are able to receive any nuclear-related information. INSTN (National Institute for Nuclear technology) provides teachers with annual sessions (two weeks) at Saclay research centre for complementary information on nuclear science with practical works. Information materials are also supplied

The Analysis of Electrical Energy Consumption of the Impact Screwdriver During Assembly of Fixed Threaded Joints

Science.gov (United States)

Grinevich, I.; Nikishin, Vl.; Mozga, N.; Laitans, M.

2017-06-01

The paper deals with the possibilities of reducing the consumption of electrical energy of the impact screwdriver during the assembly of fixed threaded joints. The recommendations related to a decrease in electrical energy consumption would allow reducing product costs but so far there have been no such recommendations from the producers of the tool as to the effective operating regimes of the impact screwdrivers in relation to electrical energy consumption and necessary tightening moment of the nut. The aim of the study is to find out the economical operating mode of the electrical impact screwdriver when assembling fixed threaded joints. By varying the set speed of the rotor head and working time of the impact mechanism, there is an opportunity to determine electrical energy consumption of the tool for the given tightening moment. The results of the experiment show that at the same tightening moment obtained the electrical energy consumption of the impact screwdriver is less at a higher starting set speed of the rotor head but shorter operating time of the impact mechanism than at a lower speed of the rotor head and longer operating time of the impact mechanism.

Deliberated opinion of the Environment Authority concerning the dismantling of the Ulysse reactor (CEA Saclay)

International Nuclear Information System (INIS)

2010-01-01

As the Ulysse reactor of Saclay is about to be dismantled, this report discusses the content of a request made by the CEA to definitely stop and dismantle this reactor. After having recalled the origin of this dismantling project and its regulatory framework, it describes the actual works which are planned, and outlines the main challenges to be faced. It discusses the content of the environmental report or impact study, notably the analysis of the initial condition, the analysis of direct and indirect effects of the project on the environment and health, and of the envisaged measures (waste management, liquid and gaseous effluent management, risk management, radiological exposure of workers in charge of this dismantling, and transports). Recommendations are formulated for a rewriting of the provided documents

The JANNUS Saclay facility: A new platform for materials irradiation, implantation and ion beam analysis

Energy Technology Data Exchange (ETDEWEB)

Pellegrino, S., E-mail: stephanie.pellegrino@cea.fr [CEA, INSTN, UEPTN, Laboratoire JANNUS, F-91191 Gif-sur-Yvette (France); Trocellier, P.; Miro, S.; Serruys, Y.; Bordas, E.; Martin, H. [CEA, DEN, Service de Recherches de Metallurgie Physique, Laboratoire JANNUS, F-91191 Gif-sur-Yvette (France); Chaabane, N.; Vaubaillon, S. [CEA, INSTN, UEPTN, Laboratoire JANNUS, F-91191 Gif-sur-Yvette (France); Gallien, J.P.; Beck, L. [CEA, DEN, Service de Recherches de Metallurgie Physique, Laboratoire JANNUS, F-91191 Gif-sur-Yvette (France)

2012-02-15

The third accelerator of the multi-ion irradiation platform JANNUS (Joint Accelerators for Nanosciences and NUclear Simulation), a 6SDH-2 Pelletron from National Electrostatic Corporation, Middleton was installed at Saclay in October 2009. The first triple beam irradiation combining Fe, He and H ion beams has been performed in March 2010. In the first part of this paper, we give a technical description of the triple beam facility, its performances and experimental capabilities. Typically, damage dose up to 100 dpa can be reached in 10 h irradiation with heavy ion beams, with or without simultaneous bombardment by protons, helium-4 ions or any other heavy ion beam. In the second part of this paper, we illustrate some IBA results obtained after irradiation and implantation experiments.

Test Results of the Third LHC Main Quadrupole Magnet Prototype at CEA/Saclay

CERN Document Server

Derégel, J; Gourdin, C; Hervieu, M; Ogitsu, T; Peyrot, M; Rifflet, J M; Schild, T; Simon, F; Tortschanoff, Theodor; Tsuchiya, K

2002-01-01

The construction of the third second-generation main quadrupole magnet prototype for LHC has been completed at CEA/Saclay in November 2000. The magnet was tested at 1.9 K. Similarly to the two first ones, this prototype has exceeded the operating current in one training step and exhibited excellent training memory after a thermal cycle. This paper describes the quench performance and quench start localization determined by means of voltage-taps and a quench antenna system developed in collaboration with KEK. As this magnet was equipped with capacitive gauges, the stresses during cool-down and powering have been recorded and are in agreement with FE computations. The newly designed quench heaters have improved efficiency and reproducibility compared to those of the first generation. Magnetic measurements have been performed at various stages. The cold measurements show minor differences with those at room temperature and are similar to those of the two first magnets of this design. These results prove that the...

Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks

Science.gov (United States)

Wu, Shaobo; Chou, Wusheng; Niu, Jianwei; Guizani, Mohsen

2018-01-01

Wireless sensor networks (WSNs) involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector) path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio. PMID:29562628

Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks.

Science.gov (United States)

Wu, Shaobo; Chou, Wusheng; Niu, Jianwei; Guizani, Mohsen

2018-03-18

Wireless sensor networks (WSNs) involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector) path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio.

Delay-Aware Energy-Efficient Routing towards a Path-Fixed Mobile Sink in Industrial Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Shaobo Wu

2018-03-01

Full Text Available Wireless sensor networks (WSNs involve more mobile elements with their widespread development in industries. Exploiting mobility present in WSNs for data collection can effectively improve the network performance. However, when the sink (i.e., data collector path is fixed and the movement is uncontrollable, existing schemes fail to guarantee delay requirements while achieving high energy efficiency. This paper proposes a delay-aware energy-efficient routing algorithm for WSNs with a path-fixed mobile sink, named DERM, which can strike a desirable balance between the delivery latency and energy conservation. We characterize the object of DERM as realizing the energy-optimal anycast to time-varying destination regions, and introduce a location-based forwarding technique tailored for this problem. To reduce the control overhead, a lightweight sink location calibration method is devised, which cooperates with the rough estimation based on the mobility pattern to determine the sink location. We also design a fault-tolerant mechanism called track routing to tackle location errors for ensuring reliable and on-time data delivery. We comprehensively evaluate DERM by comparing it with two canonical routing schemes and a baseline solution presented in this work. Extensive evaluation results demonstrate that DERM can provide considerable energy savings while meeting the delay constraint and maintaining a high delivery ratio.

Decree no. 2004-48 from January 12, 2004 authorizing the French atomic energy commission to proceed to the definitive decommissioning and dismantling operations of the nuclear facility no. 43, named Saclay linear accelerator (ALS), on the territory of Saint-Aubin town (Essonne); Decret no. 2004-48 du 12 janvier 2004 autorisant le Commissariat a l'energie atomique a proceder aux operations de mise a l'arret definitif et de demantelement de l'installation nucleaire de base no. 43 denommee accelerateur lineaire de Saclay (ALS) sur le territoire de la Commune de Saint-Aubin (Essonne)

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

The linear accelerator of Saclay (ALS) has been the object of a commissioning permission given by decree by the French prime minister in October 8, 1965. It is submitted to the regime of basic nuclear facilities as defined in the decree no. 63-1228 from December 11, 1963. The French atomic energy commission (CEA) put down a request for the definitive decommissioning and dismantling of this facility on May 30, 2002. The duration foreseen for these operations is of 4 years. After the safety examination of the request by the DGSNR and the institute of radioprotection and nuclear safety (IRSN), a favorable and conformable advice has been given by the different ministries (health, finances and industry, ecology and sustainable development) and has led to this decree which precises the different protection measures to be implemented during the dismantling work. (J.S.)

Welcoming remarks - International Conference on Nuclear Knowledge Management, 7-10 September 2004, Saclay, France

International Nuclear Information System (INIS)

Aly, A.M.M.

2004-01-01

Full text: Ladies and Gentlemen: On behalf of the Government of Canada, the Canadian Nuclear Industry and my company, Atomic Energy of Canada Limited, It gives me great pleasure to welcome you all here at this timely and important International Conference on Nuclear Knowledge Management. I say timely and important because we are at a cross roads today. If we are serious about passing the torch to a new generation, it's time to act now, if we have not done so already. As I speak today, many experts around the world are retiring taking with them a lot of knowledge and corporate memory. I know that first hand as almost 50% of the managers in my department are eligible for retirement today without penalty. Of course I have a succession plan in place and I am sure many of you do, however, it is not just a number game. These people retiring everyday are those that can answer questions very easily. They either know where the information reside and can get it quickly or have the answers in their heads as tacit knowledge that was never extracted from them previously. All companies have significant amount of information in filing systems or on a server somewhere. This information cannot be considered knowledge until we know how to retrieve it and make it available to those who need it. I look forward to a very interesting few days in which we would exchange information and learn from each other. Finally, I wish to thank the IAEA for organizing such an important conference and the French Government and CEA for hosting the conference at Saclay. (author)

10 CFR 603.305 - Use of a fixed-support TIA.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Use of a fixed-support TIA. 603.305 Section 603.305 Energy... Expenditure-Based and Fixed-Support Technology Investment Agreements § 603.305 Use of a fixed-support TIA. The contracting officer may use a fixed-support TIA if: (a) The agreement is to support or stimulate RD&D with...

NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

Science.gov (United States)

Hathaway, Michael D.; DelRasario, Ruben; Madavan, Nateri K.

2013-01-01

This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 % relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030-2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

Near-Threshold Production of W±, Z0, and H0 at a Fixed-Target Experiment at the Future Ultrahigh-Energy Proton Colliders

Directory of Open Access Journals (Sweden)

J. P. Lansberg

2015-01-01

Full Text Available We outline the opportunities to study the production of the Standard Model bosons, W±, Z0, and H0, at “low” energies at fixed-target experiments based on possible future ultrahigh-energy proton colliders, that is, the High-Energy LHC, the Super proton-proton Collider, and the Future Circular Collider hadron-hadron. These can be indeed made in conjunction with the proposed future colliders designed to reach up to s=100 TeV by using bent crystals to extract part of the halo of the beam which would then impinge on a fixed target. Without disturbing the collider operation, this technique allows for the extraction of a substantial amount of particles in addition to serving for a beam-cleaning purpose. With this method, high-luminosity fixed-target studies at centre-of-mass energies above the W±, Z0, and H0 masses, s≃170–300 GeV, are possible. We also discuss the possibility offered by an internal gas target, which can also be used as luminosity monitor by studying the beam transverse shape.

Practical guide to dosimetry as applied in the research reactors of the Saclay and Grenoble nuclear research centers

International Nuclear Information System (INIS)

1968-01-01

Since the problems concerning neutron and gamma flux measurements which arise during irradiation experiments in the reactors in the Grenoble and Saclay Centres are of the same type, and since the solutions found are very often adopted in common, we have attempted to describe the methods we use at the present time. A brief description is given of the production of the detectors, the electronic apparatus; the formulae usually used for the interpretation of the measurements are given. A series of technical data cards give the most commonly used detector characteristics. These cards give the physical characteristics of the detectors, their nuclear constants, if any, the most suitable counting methods and the field of application. (authors) [fr

CEA nuclear energy Directorate - Activity report 2012

International Nuclear Information System (INIS)

2013-01-01

After an overview of the activities of the Directorate at the international level, of its scientific activities, and of the consideration given to quality, and a presentation of the transverse program on advanced materials, this report proposes presentations of activities in different domains: future nuclear industrial systems (reactors of 4. generation, back-end of the future cycle, sustainable management of nuclear materials, fundamental scientific and technological research), optimization of the present industrial nuclear activity (reactors of 2. and 3. generation, front-end and back-end of the fuel cycle), the main tools for nuclear development (numerical simulation, the Jules Horowitz reactor), valorisation, economic support of Haute-Marne and Meuse territories (the Syndiese project), nuclear dismantling and decontamination (dismantling projects, projects and works in Fontenay-aux-Roses, Grenoble and Saclay, waste and material flow management, nuclear service facilities, transports). It also presents the activities of some specific CEA centres like Marcoule (R and D in fuel cycle), Cadarache (future energies) and Saclay (nuclear sciences and simulation of reactors and fuel cycle)

An interval fixed-mix stochastic programming method for greenhouse gas mitigation in energy systems under uncertainty

International Nuclear Information System (INIS)

Xie, Y.L.; Li, Y.P.; Huang, G.H.; Li, Y.F.

2010-01-01

In this study, an interval fixed-mix stochastic programming (IFSP) model is developed for greenhouse gas (GHG) emissions reduction management under uncertainties. In the IFSP model, methods of interval-parameter programming (IPP) and fixed-mix stochastic programming (FSP) are introduced into an integer programming framework, such that the developed model can tackle uncertainties described in terms of interval values and probability distributions over a multi-stage context. Moreover, it can reflect dynamic decisions for facility-capacity expansion during the planning horizon. The developed model is applied to a case of planning GHG-emission mitigation, demonstrating that IFSP is applicable to reflecting complexities of multi-uncertainty, dynamic and interactive energy management systems, and capable of addressing the problem of GHG-emission reduction. A number of scenarios corresponding to different GHG-emission mitigation levels are examined; the results suggest that reasonable solutions have been generated. They can be used for generating plans for energy resource/electricity allocation and capacity expansion and help decision makers identify desired GHG mitigation policies under various economic costs and environmental requirements.

Report of the Fixed-Target Proton-Accelerator Group

International Nuclear Information System (INIS)

Abe, K.; Bunce, G.; Fisk, G.

1982-01-01

The fixed target proton accelerator group divided itself into two roughly equal parts. One sub-group concentrated on a high intensity (10 14 protons/sec) moderate energy (30 GeV) machine while the other worked on a moderate intensity (5 x 10 11 protons/sec) very high energy (20 TeV) machine. For experiments where the total available energy is adequate, the fixed target option added to a anti p p 20 TeV collider ring has several attractive features: (1) high luminosity afforded by intense beams striking thick solid targets; (2) secondary beams of hadrons, photons, and leptons; and (3) the versatility of a fixed target facility, where many experiments can be performed independently. The proposed experiments considered by the subgroup, including neutrino, photon, hadron, and very short lived particle beams were based both on scaled up versions of similar experiments proposed for Tevatron II at Fermilab and on the 400 GeV fixed target programs at Fermilab and CERN

Proton scattering at intermediate energies

International Nuclear Information System (INIS)

Chaumeaux, A.; Layly, V.; Schaeffer, R.

1977-01-01

This article is devoted to the analysis of the most recent Saclay data of elastic and inelastic proton scattering on nuclei at incident energies around 1GeV ( 16 O, the Ca isotopes, the Ni isotopes, 90 Zr and 208 Pb). Various theories (Impulse or Glauber approximation) are comapred. It is shown that the reaction mechanism is very well understood at 1GeV and that, at these energies, absorption and distortion is small enough, so one can extract nuclear densities from the experiment. In particular, the shape of the neutron densities is given, and compared to the Hartree-Fock predictions. The uncertainties, especially in the determination of the neutron radii are discussed [fr

Study on the generalized WKB approximation for the inverse scattering problem at fixed energy for complex potentials

International Nuclear Information System (INIS)

Pozdnyakov, Yu.A.; Terenetskij, K.O.

1981-01-01

The approximate method for solution of the inverse scattering problem (ISP) at fixed energy for complex spherically symmetric potentials decreasing faster 1/r is considered. The method is based on using a generalized WKB approximation. For the designed potential V(r) a sufficiently ''close'' reference potential V(r) has been chosen. For both potentials S-matrix elements (ME) have been calculated and inversion procedure has been carried out. S-ME have been calculated for integral-valued and intermediate angular moment values. S-ME are presented in a graphical form for being restored reference, and restored potentials for proton scattering with Esub(p)=49.48 MeV energy on 12 C nuclei. The restoration is the better the ''closer'' the sought-for potential to the reference one. This allows to specify the potential by means of iterations: the restored potential can be used as a reference one, etc. The operation of a restored potential smoothing before the following iteration is introduced. Drawbacks and advantages of the ISP solution method under consideration are pointed out. The method application is strongly limited by the requirement that the energy should be higher than a certain ''critical'' one. The method is applicable in a wider region of particle energies (in the low-energies direction) than the ordinary WKB method. The method is more simple in realization conformably to complex potentials. The investigations carried out of the proposed ISP solution method at fixed energy for complex spherically-symmetric potentials allow to conclude that the method can be successFully applied to specify the central part of interaction of nucleons, α-particles and heavy ions of average and high energies with atomic nuclei [ru

Energy isn't Everything: CERN's Fixed Target Niche (1/2)

CERN Multimedia

CERN. Geneva

2008-01-01

Fixed target physics at CERN remains an essential part of the laboratory's scientific programme and horizon. In recent years fixed target and decay physics using CERN's unique accelerator and beam facilities continues enabling unique experiments to be undertaken. An overview is presented of the status of this physics and, wherever appropriate, of its future.

Energy isn't Everything: CERN's Fixed Target Niche (2/2)

CERN Multimedia

CERN. Geneva

2008-01-01

Fixed target physics at CERN remains an essential part of the laboratory's scientific programme and horizon. In recent years fixed target and decay physics using CERN's unique accelerator and beam facilities continues enabling unique experiments to be undertaken. An overview is presented of the status of this physics and, wherever appropriate, of its future.

Fixed Target Collisions at STAR

Energy Technology Data Exchange (ETDEWEB)

Meehan, Kathryn C.

2016-12-15

The RHIC Beam Energy Scan (BES) program was proposed to look for the turn-off of signatures of the quark gluon plasma (QGP), search for a possible QCD critical point, and study the nature of the phase transition between hadronic and partonic matter. Previous results have been used to claim that the onset of deconfinement occurs at a center-of-mass energy of 7 GeV. Data from lower energies are needed to test if this onset occurs. The goal of the STAR Fixed-Target Program is to extend the collision energy range in BES II to energies that are likely below the onset of deconfinement. Currently, STAR has inserted a gold target into the beam pipe and conducted test runs at center-of-mass energies of 3.9 and 4.5 GeV. Tests have been done with both Au and Al beams. First physics results from a Coulomb potential analysis of Au + Au fixed-target collisions are presented and are found to be consistent with results from previous experiments. Furthermore, the Coulomb potential, which is sensitive to the Z of the projectile and degree of baryonic stopping, will be compared to published results from the AGS.

Experimental and theoretical study of yield and spectrum of photons obtained from positron annihilation in flight; Etude experimentale et theorique du nombre total de photons et de la forme de la raie obtenue par annihilation en vol de positons

Energy Technology Data Exchange (ETDEWEB)

Audit, G; Botton, N de; Le Poittevin, G; Schuhl, C; Tamas, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

A computer program has been used to calculate the spectrum of photons obtained from positron annihilation in flight; the calculation takes account of multiple scattering and energy loss of positrons in the annihilation target. Results are presented in the energy range 150-450 MeV which is the one of Saclay Linear Accelerator. As a check, results of the calculation are compared with measurements carried out at the Saclay Linac of 45 MeV. (author) [French] Nous avons ecrit un programme permettant de calculer le spectre des photons obtenus par annihilation en vol de positons; le calcul tient compte de la diffusion multiple et de la perte d'energie des positons dans la cible d'annihilation. Nous donnons une serie de resultats dans la zone d'energie de 150 a 450 MeV qui correspond aux possibilites de l'Accelerateur Lineaire de Saclay. Les resultats du calcul sont confrontes a des mesures effectuees a l'Accelerateur Lineaire de 45 MeV de Saclay. (auteur)

{pi}{sup -}-p proton scattering at 516, 616, 710, 887 and 1085 MeV (1961); Diffusion de protons {pi}{sup -}-p aux energies de 516, 616, 710, 887 et 1085 MeV (1961)

Energy Technology Data Exchange (ETDEWEB)

Barloutaud, R; Choquet, C; Gaillard, J M; Heughebaert, J; Leveque, A; Lehmann, P; Meyer, J; Revel, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Grard, F; Heughebaert, J [I.I.S.N., Lab. des Hautes Energies, Bruxelles (Belgium); Grard, F; Macleod, G; Montanet, L [Conseil Europeen pour la recherche nucleaire, Lab. europeen pour la physique des particules, Geneve (Switzerland)

1961-07-01

{pi}{sup -}-p collisions at energies of 516, 616, 710, 887 and 1085 MeV were observed by means of the 20 cm Saclay bubble chamber. Angular distributions for elastic scattering were obtained and analyzed. Total cross sections for elastic and inelastic scattering for {pi}{sup -}-p collisions and for the T = 1/2 state were determined. (authors) [French] Nous avons etudie des collisions entre pions negatifs et protons aux energies de 516, 616, 710, 887 et 1085 MeV, au moyen de la chambre A bulles de 20 cm de Saclay. Les distributions angulaires de diffusion elastique ont ete obtenues et analysees. Nous avons determine les sections efficaces totales pour les diffusions elastiques et inelastiques {pi}{sup -}-p et pour ces processus dans l'etat T = 1/2. (auteurs)

The ISRN has assessed the safety and radioprotection of the solid radioactive waste management area at CEA/Saclay; L'IRSN a expertise la surete et la radioprotection de la zone de gestion des dechets radioactifs solides du CEA/Saclay

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

Completed by a report of a Permanent Group of Experts on the safety re-examination for the solid radioactive waste management area of the CEA/Saclay, this paper is a statement of the assessment by the IRSN (the French Institute of Radioprotection and Nuclear Safety) of this safety re-examination. It first recalls what a safety re-examination is for a nuclear installation and indicates the documents which have been transmitted by the CEA and analysed. Then, it briefly describes the activities which are performed in the concerned area: collecting, warehousing, conditioning, control and shipping of solid radioactive wastes or useless fuels. The IRSN comments the works done and to be done for the different operations on different types of waste (low or middle activity), and then the different aspects of the installation safety (radiations, confining, fire, climatic events, civil engineering)

Progress on a spherical TPC for low energy neutrino detection

International Nuclear Information System (INIS)

Aune, S; Colas, P; Deschamps, H; Dolbeau, J; Fanourakis, G; Ribas, E Ferrer; Enqvist, T; Geralis, T; Giomataris, Y; Gorodetzky, P; Gounaris, G J; Gros, M; Irastorza, I G; Kousouris, K; Lepeltier, V; Morales, J; Patzak, T; Paschos, E A; Salin, P; Savvidis, I; Vergados, J D

2006-01-01

The new concept of the spherical TPC aims at relatively large target masses with low threshold and background, keeping an extremely simple and robust operation. Such a device would open the way to detect the neutrino-nucleus interaction, which, although a standard process, remains undetected due to the low energy of the neutrino-induced nuclear recoils. The progress in the development of the first 1 m 3 prototype at Saclay is presented. Other physics goals of such a device could include supernova detection, low energy neutrino oscillations and study of non-standard properties of the neutrino, among others

IRAP 2006, Book of Abstracts

International Nuclear Information System (INIS)

2006-01-01

This publications related with Hacettepe University, Turkish Atomic Energy Authority, The Scientific and Technological Research Council of Turkey, International Atomic Energy Agency, CEA-Saclay, CEA-Saclay Drecam, ANKAmall Shopping Center and Ion Beam Applications Industrial that was held in Antalya, Turkey, 23-28 September 2006. A separate abstract was prepared for each paper

IRAP 2006, Book of Abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This publications related with Hacettepe University, Turkish Atomic Energy Authority, The Scientific and Technological Research Council of Turkey, International Atomic Energy Agency, CEA-Saclay, CEA-Saclay Drecam, ANKAmall Shopping Center and Ion Beam Applications Industrial that was held in Antalya, Turkey, 23-28 September 2006. A separate abstract was prepared for each paper.

Direct and inverse scattering at fixed energy for massless charged Dirac fields by Kerr-Newman-de Sitter black holes

CERN Document Server

Daudé, Thierry

2017-01-01

In this paper, the authors study the direct and inverse scattering theory at fixed energy for massless charged Dirac fields evolving in the exterior region of a Kerr-Newman-de Sitter black hole. In the first part, they establish the existence and asymptotic completeness of time-dependent wave operators associated to our Dirac fields. This leads to the definition of the time-dependent scattering operator that encodes the far-field behavior (with respect to a stationary observer) in the asymptotic regions of the black hole: the event and cosmological horizons. The authors also use the miraculous property (quoting Chandrasekhar)-that the Dirac equation can be separated into radial and angular ordinary differential equations-to make the link between the time-dependent scattering operator and its stationary counterpart. This leads to a nice expression of the scattering matrix at fixed energy in terms of stationary solutions of the system of separated equations. In a second part, the authors use this expression of ...

Effective channel approach to nuclear scattering at high energies

International Nuclear Information System (INIS)

Rule, D.W.

1975-01-01

The description of high energy nuclear reactions is considered within the framework of the effective channel approach. A variational procedure is used to obtain an expression for the Green's function in the effective channel, which includes the average fluctuation potential, average energy, and an additional term arising from the non-commutability of the kinetic energy operator and the effective target wave function. The resulting expression for the effective channel, containing one variational parameter, is used to obtain the coupling potential. The resulting formulation is applied to the elastic scattering of 1 GeV protons by 4 He nuclei. A simple Gaussian form is used for the spin--isospin averaged proton--nucleon interaction. The variational parameter in the effective channel wave function is fixed a posteriori via the total p-- 4 He cross section. The effect of the coupling to the effective channel is demonstrated, as well as the effect of each term in the coupled equation for this channel. The calculated elastic cross sections were compared to both the recent data from Saclay and the earlier Brookhaven data for the 1-GeV p-- 4 He elastic scattering cross section. Using proton--nucleus elastic scattering experiments to study the proton--nucleon elastic scattering amplitude is discussed. The main purpose of our study is to investigate the effects on the cross section of varying, within its estimated range of uncertainty, each parameter which enters into the coupled equations. The magnitude of these effects was found to be large enough to conclude that any effects due to dynamical correlations would be obscured by the uncertainties in the input parameters

Fixed-Target Electron Accelerators

International Nuclear Information System (INIS)

Brooks, William K.

2001-01-01

A tremendous amount of scientific insight has been garnered over the past half-century by using particle accelerators to study physical systems of sub-atomic dimensions. These giant instruments begin with particles at rest, then greatly increase their energy of motion, forming a narrow trajectory or beam of particles. In fixed-target accelerators, the particle beam impacts upon a stationary sample or target which contains or produces the sub-atomic system being studied. This is in distinction to colliders, where two beams are produced and are steered into each other so that their constituent particles can collide. The acceleration process always relies on the particle being accelerated having an electric charge; however, both the details of producing the beam and the classes of scientific investigations possible vary widely with the specific type of particle being accelerated. This article discusses fixed-target accelerators which produce beams of electrons, the lightest charged particle. As detailed in the report, the beam energy has a close connection with the size of the physical system studied. Here a useful unit of energy is a GeV, i.e., a giga electron-volt. (ne GeV, the energy an electron would have if accelerated through a billion volts, is equal to 1.6 x 10 -10 joules.) To study systems on a distance scale much smaller than an atomic nucleus requires beam energies ranging from a few GeV up to hundreds of GeV and more

A high-energy double-crystal fixed exit monochromator for the X17 superconducting wiggler beam line at the NSLS

International Nuclear Information System (INIS)

Garrett, R.F.; Dilmanian, F.A.; Oversluizen, T.; Lenhard, A.; Berman, L.E.; Chapman, L.D.; Stoeber, W.

1992-01-01

A high-energy double-crystal x-ray monochromator has been constructed for use on the X-17 beam line at the National Synchrotron Light Source (NSLS). Its design is based on the ''boomerang'' right angle linkage, and features a fixed exit beam, a cooled first crystal, and an energy range of 8--92 keV. The entire mechanism is UHV compatible. The design is described and performance details, obtained in testing at the X17 beam line, are presented

Photoneutron multiplicities of preactinide nuclei at energies above the pion threshold

International Nuclear Information System (INIS)

Arruda-Neto, J.D.T.; Simionatto, S.; Likhachev, V.P.; Garcia, F.; Mesa, J.

1998-01-01

The average photoneutron multiplicities anti ν of Au, Ta and 182 W were deduced from their previously measured excitation energies anti E x , from 160 to 250 MeV. A combined analysis of these data and those measured at Saclay up to 140 MeV allowed the extraction of information on anti E x at the ''pure evaporation'' and quasideuteron energy regions. A theoretical approach for the study of anti ν above 140 MeV, which incorporates photopion reabsorption processes by two-body, was proposed, allowing a tentative delineation of the pion mean free path in the nucleus. (orig.)

Report on the visit to Saclay related to the VISA-2 Project, 13.XI - 13. XII 1961; Izvestaj o poseti Saclayu u vezi projekta VISA-2, 13.XI - 13. XII 1961

Energy Technology Data Exchange (ETDEWEB)

Milasin, N [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1963-03-15

This report describes the activities of the Department for construction materials in Saclay visited by the author. This department deals with both irradiated and unirradiated materials, namely Zirconium, stainless steels, Beryllium which are used for fabrication of fuel element claddings and tubes to be used under reactor conditions. Mechanical properties of these materials are performed by applying different experimental techniques.

Direction of Nuclear Energy. Activity report 2010

International Nuclear Information System (INIS)

2011-11-01

This report proposes an overview of the research activities performed by the French DEN (Direction de l'Energie Nucleaire, Direction of Nuclear Energy) within the CEA. These activities address the future nuclear industrial systems (4. generation reactors, back-end of the future fuel cycle, basic scientific and technological research), the optimization of the industrial nuclear power (fuel cycle front end, second and third generation reactors, back-end of the present fuel cycle), major tools for the development of nuclear energy (simulation tools, Jules Horowitz reactor, value creation), clean up and dismantling of nuclear facilities (present status, the Passage project in Grenoble, the Aladin project in Fontenay-aux-Roses, projects at Marcoule, flow management of radioactive wastes, materials and disused fuels, transport). Three research centres are presented: Marcoule, Cadarache and Saclay

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar

2012-06-01

In this report, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized while keeping the signal-to-noise-ratio (SNR) above a certain threshold. In the dual problem of power allocation, the end-to-end SNR is maximized under individual and global power constraints. Closed-form expressions for the optimal source and relay powers and the Lagrangian multiplier are obtained. Numerical results show that the optimal power allocation with partial CSI provides comparable performance as optimal power allocation with full CSI at low SNR.

Energy-Efficient Power Allocation for Fixed-Gain Amplify-and-Forward Relay Networks with Partial Channel State Information

KAUST Repository

Zafar, Ammar

2012-09-16

In this letter, energy-efficient transmission and power allocation for fixed-gain amplify-and-forward relay networks with partial channel state information (CSI) are studied. In the energy-efficiency problem, the total power consumed is minimized while keeping the signal-to-noise-ratio (SNR) above a certain threshold. In the dual problem of power allocation, the end-to-end SNR is maximized under individual and global power constraints. Closed-form expressions for the optimal source and relay powers and the Lagrangian multiplier are obtained. Numerical results show that the optimal power allocation with partial CSI provides comparable performance as optimal power allocation with full CSI at low SNR. © 2012 IEEE.

10 CFR 603.315 - Advantages of a fixed-support TIA.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Advantages of a fixed-support TIA. 603.315 Section 603.315... fixed-support TIA. In situations where the use of a fixed-support TIA is permissible (see §§ 603.305 and... TIA, the contracting officer can eliminate or reduce some post-award requirements that sometimes are...

48 CFR 916.203 - Fixed-price contracts with economic price adjustments.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustments. 916.203 Section 916.203 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 916.203 Fixed...

Factors that promote renewable energy production in U.S. states: A fixed effect estimation

Science.gov (United States)

Nwokeji, Ekwuniru Chika

2011-12-01

The unsustainability of conventional energy sources and its environmental destructions are well-known; the sustainability of renewable energy and its environmental benefits are also well-documented. The United States in common with many other countries is increasingly focused on developing renewable energy. At first, the pursuit of this strategy in U.S. was seen more as a way to reduce dependence on oil importation. With increased awareness of environmental challenges resulting from the consumption and production of conventional energy, an additional strategy for the continued interest in renewable energy development in the United States was as a result of its potential to ameliorate environmental problems. The U.S. government are utilizing policy measures and dedicating funding to encourage the development of renewable energy technologies. Beside government policies, there are contextual factors that also affect renewable energy production. These include, but not limited to population growth, energy demand, economic growth, and public acceptance. Given the pressing need to develop a sustainable energy, this study embarks on an outcome assessment of the nature of relationship of renewable energy policy incentives, and selected contextual factors on renewable energy production in the United States. The policy incentive evaluated in this study is the Renewable Energy Production Incentive program. The contextual factors evaluated in this study are energy consumption, population growth, employment, and poverty. Understanding the contextual factors within which policies are placed is essential to defining the most appropriate policy features. The methodological approach to the study is quantitative, using panel data from 1976 to 2007. The study tested two hypotheses using fixed effect estimation with robust standard error as a statistical model. Statistical analyses reveal several interesting results which lend support that besides policy incentives, contextual factors

[Microanalytical determinations of gold alloys for fixed dentures].

Science.gov (United States)

Lotito, M; Negri, P; Fraschini, M

1993-01-01

In this work the authors analyse gold alloys for fixed prosthesis by X-ray spectrometry in energy dispersion (EDS). The results of this analysis, given in graphic and table form, show remarkable differences in alloy composition. For this reason recommended dentists are to be attentive and severe in the control of gold alloys for fixed prosthesis.

Korea-France Forum on New Technologies for Energy

International Nuclear Information System (INIS)

Chang, Jong Hwa; Shin, Young Joon; Kim, Yong Wan

2007-07-01

In celebration of the 120th anniversary on Korea-France diplomatic relations, both Korea and France agreed that the New-generation Energy Forum on a VHTR-assisted nuclear hydrogen production, renewable energy, and bio-fuel should be held in Paries, France. In accordance with the agreement, the Korea-France Forum on New Technologies for Energy organized by KAERI and CEA was held at the Mercure Hotel Conference Hall in Paries for a couple of days, November 6 and 7 and a facility visit to the CEA-Saclay was arranged on November 8 by the French side. 19 scientists from both countries presented their R and D status and plans in 4 technical sessions of 'VHTR Nuclear System', 'VHTR-assited Hydrogen Production', 'Renewable Energy', and 'Fuel Cell and Energy Storage'. A contact point in each field was established for the exchange of technological information and dispatch of experts if necessary

Induction Heating on Dynamic Tensile Tests in CEA Saclay

International Nuclear Information System (INIS)

Averty, X.; Yvon, P.; Duguay, C.; Pizzanelli, J. P.; Basini, V.

2001-01-01

The LCMI (Laboratory for characterization of irradiated materials), located in CEA from Saclay, is in charge of the mechanical tests on irradiated materials. The dynamic tensile testing machine, in a hot cell equipped with two remote handling, has been first improved in 1995, to fulfill the French safety programs on Reactivity Initiated Accident (RIA). One objective of this machine is to obtain mechanical property data on current Zircaloy cladding types needed to quality the cladding's response under RIA or LOCA transient loading and thermal conditions. For the RIA, this means testing at strain rates up to 5 s' and heating rates up to 200 degree centigree-s''-1, while for Loss of Coolant Accidents (LOCA) testing at strain rates of 10''-3 s''-1 and heating rates of 20 degree centigree s''-1 would be appropriate. The tensile samples are machined with a spark erosion machine, directly from pieces of cladding previously de fueled. Two kinds of samples can be machined in the cladding. Axial samples in order to test axial mechanical characteristics Ring samples in order to test transverse mechanical characteristics, more representative of RIA conditions. On one hand, the axial tensile tests were performed using the Joule effect, and heating rates up to about 500 degree centigree .s''-1 were obtained. This enabled us to perform the axial tests in a satisfactory manner. On the other hand, the tensile ring were first performed in a vertical furnace with a heating rate about 0.2 degree centigree.s''-1 and a thermal stability about 1 degree centigree. For temperatures above 480 degree centigree, the mechanical characteristics showed a sharp drop which could be attributed to irradiation defect annealing. Therefore we have recently developed an induction heating system to reach heating rates high enough (200 degree centigree.s''-1) to prevent any significant annealing before performing the ring tensile tests. To apply a uniaxial tangential tension, two matching half

Methodology for performing surveys for fixed contamination

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1994-10-01

This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

Thermal Analysis of Fluidized Bed and Fixed Bed Latent Heat Thermal Storage System

Science.gov (United States)

Beemkumar, N.; Karthikeyan, A.; Shiva Keshava Reddy, Kota; Rajesh, Kona; Anderson, A.

2017-05-01

Thermal energy storage technology is essential because its stores available energy at low cost. Objective of the work is to store the thermal energy in a most efficient method. This work is deal with thermal analysis of fluidized bed and fixed bed latent heat thermal storage (LHTS) system with different encapsulation materials (aluminium, brass and copper). D-Mannitol has been used as phase change material (PCM). Encapsulation material which is in orbicular shape with 4 inch diameter and 2 mm thickness orbicular shaped product is used. Therminol-66 is used as a heat transfer fluid (HTF). Arrangement of encapsulation material is done in two ways namely fluidized bed and fixed bed thermal storage system. Comparison was made between the performance of fixed bed and fluidized bed with different encapsulation material. It is observed that from the economical point of view aluminium in fluidized bed LHTS System has highest efficiency than copper and brass. The thermal energy storage system can be analyzed with fixed bed by varying mass flow rate of oil paves a way to find effective heat energy transfer.

Chemical-looping combustion in a reverse-flow fixed bed reactor

International Nuclear Information System (INIS)

Han, Lu; Bollas, George M.

2016-01-01

A reverse-flow fixed bed reactor concept for CLC (chemical-looping combustion) is explored. The limitations of conventional fixed bed reactors, as applied to CLC, are overcome by reversing the gas flow direction periodically to enhance the mixing characteristics of the bed, thus improving oxygen carrier utilization and energy efficiency with respect to power generation. The reverse-flow reactor is simulated by a dusty-gas model and compared with an equivalent fixed bed reactor without flow reversal. Dynamic optimization is used to calculate conditions at which each reactor operates at maximum energy efficiency. Several cases studies illustrate the benefits of reverse-flow operation for the CLC with CuO and NiO oxygen carriers and methane and syngas fuels. The results show that periodic reversal of the flow during reduction improves the contact between the fuel and unconverted oxygen carrier, enabling the system to suppress unwanted catalytic reactions and axial temperature and conversion gradients. The operational scheme presented reduces the fluctuations of temperature during oxidation and increases the high-temperature heat produced by the process. CLC in a reverse-flow reactor has the potential to achieve higher energy efficiency than conventional fixed bed CLC reactors, when integrated with a downstream gas turbine of a combined cycle power plant. - Highlights: • Reverse-flow fixed bed CLC reactors for combined cycle power systems. • Dynamic optimization tunes operation of batch and transient CLC systems. • The reverse-flow CLC system provides stable turbine-ready gas stream. • Reverse-flow CLC fixed bed reactor has superior CO 2 capture and thermal efficiency.

Korea-France Forum on New Technologies for Energy

Energy Technology Data Exchange (ETDEWEB)

Chang, Jong Hwa; Shin, Young Joon; Kim, Yong Wan

2007-07-15

In celebration of the 120th anniversary on Korea-France diplomatic relations, both Korea and France agreed that the New-generation Energy Forum on a VHTR-assisted nuclear hydrogen production, renewable energy, and bio-fuel should be held in Paries, France. In accordance with the agreement, the Korea-France Forum on New Technologies for Energy organized by KAERI and CEA was held at the Mercure Hotel Conference Hall in Paries for a couple of days, November 6 and 7 and a facility visit to the CEA-Saclay was arranged on November 8 by the French side. 19 scientists from both countries presented their R and D status and plans in 4 technical sessions of 'VHTR Nuclear System', 'VHTR-assited Hydrogen Production', 'Renewable Energy', and 'Fuel Cell and Energy Storage'. A contact point in each field was established for the exchange of technological information and dispatch of experts if necessary.

Influence of the surface free energy of silane-coupled mica substrate on the fixing and straightening of DNA

International Nuclear Information System (INIS)

Sasou, Megumi; Sugiyama, Shigeru; Ishida, Takao; Ohtani, Toshio; Miyake, Koji

2009-01-01

Methyltrimethoxysilane (MTMS)-coupled mica substrate is reportedly suitable for fixing and straightening of DNA, but 3-aminopropyltriethoxysilane (APTES)-coupled mica substrate has been found less suitable. On MTMS-coupled mica substrate, the straightness of fixed DNA was sufficient, and the adsorption of contaminants was not observed using fluorescence microscopy and atomic force microscopy. For the APTES-coupled mica substrate, however, aggregated or curved DNA and adsorption of contaminants were observed. To clarify the surface factors that are responsible for this suitability, we analyzed the surface free energies of these substrates using the extended Fowkes theory. In each of the surface free energy components, the dispersion force component in the MTMS-coupled mica substrate was lower than that in the APTES-coupled mica substrate. The ratio of the polar force component on the MTMS-coupled mica substrate was about one order of magnitude on the APTES-coupled mica substrate. In addition, the ratio of the hydrogen-bonding force component for the MTMS-coupled mica substrate was about two times larger than that of the APTES-coupled mica substrate. These results suggest that the polar force and hydrogen-bonding force components are important factors for the fixation and straightening of DNA and that the dispersion force components influence the production and adsorption of contaminants.

Fixed target beams

CERN Document Server

Kain, V; Cettour-Cave, S; Cornelis, K; Fraser, M A; Gatignon, L; Goddard, B; Velotti, F

2017-01-01

The CERN SPS (Super Proton Synchrotron) serves asLHC injector and provides beam for the North Area fixedtarget experiments. At low energy, the vertical acceptancebecomes critical with high intensity large emittance fixed tar-get beams. Optimizing the vertical available aperture is a keyingredient to optimize transmission and reduce activationaround the ring. During the 2016 run a tool was developed toprovide an automated local aperture scan around the entirering.The flux of particles slow extracted with the1/3inte-ger resonance from the Super Proton Synchrotron at CERNshould ideally be constant over the length of the extractionplateau, for optimum use of the beam by the fixed target ex-periments in the North Area. The extracted intensity is con-trolled in feed-forward correction of the horizontal tune viathe main SPS quadrupoles. The Mains power supply noiseat 50 Hz and harmonics is also corrected in feed-forwardby small amplitude tune modulation at the respective fre-quencies with a dedicated additional quad...

Fixed target electroweak and hard scattering physics

International Nuclear Information System (INIS)

Brock, R.; Brown, C.N.; Montgomery, H.E.; Corcoran, M.D.

1990-02-01

The possibilities for future physics and experiments involving weak and electromagnetic interactions, neutrino oscillations, general hard scattering and experiments involving nuclear targets were explored. The studies were limited to the physics accessible using fixed target experimentation. While some of the avenues explored turn out to be relatively unrewarding in the light of competition elsewhere in the world, there are a number of positive conclusions reached about experimentation in the energy range available to the Main Injector and Tevatron. Some of the experiments would benefit from the increased intensity available from the Tevatron utilizing the Main Injector, while some require this increase. Finally, some of the experiments would use the Main Injector low energy, high intensity extracted beams directly. A program of electroweak and hard scattering experiments at fixed target energies retains the potential for important contributions to physics. The key to major parts of this program would appear to be the existence of the Main Injector. 115 refs, 17 figs

FY1995 studies on saving energy by use of nitrogen- fixing bacteria; 1995 nendo chisso koteikin no katsuyo ni yoru sho energy no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

To save energy by improving the ability of nitrogen-fixing bacteria (Kebsiella oxytoca, Azospirillum lipoferum and Sphingomonas paucimobilis) in the rhizosphere of rice, by means of genetic analysis and engineering of the nif genes. Analysis and improvement of the nif genes were performed in 3 species of nitrogen-fixing bacteria in the rhizoshere of rice. (1) In an facultative anaerobe, K. oxytoca, the repressor gene, nifL was destroyed, and the activator gene, nifA was fortified, to attain a novel mutant strain R16, which fixes nitrogen even in the presence of NH{sub 4}{sup +}. (2) In a microaerophilic nitrogen fixer, A. lipoferum, the regulatory genes draT and draG were cloned and analysed, and an improved strain TA1 was obtained by introduction of K. oxytoca nifA gene. (3) In an aerobic nitrogen-fixer S. paucimobilis, the nifA gene was cloned and sequenced, and the activity was expressed in E. coil to show that the product activates the nif promoters of Azospirillurn and Klebsiella. (4) The improved strains K. oxytoca R16 and A. lipoferun TA1 were inoculated to rice plant cultured in a pot without addition of nitrogen source. The inoculated plant showed twice as much dry weight as the noninoculated plant, showing that the improved strains are effective to stimulate the growth of rice. (NEDO)

Control of the Saclay CEA's base nuclear installations - Inspection n. INS-2010-CEASAC-0006 31 May 2010-4 June 2010 - Safety management

International Nuclear Information System (INIS)

2010-01-01

This document reports an inspection dedicated to safety management, and performed by the ASN (the French Nuclear Safety Authority) on several nuclear installations present on the CEA's Saclay site. The inspected installations have been the INBs (base nuclear installations) number 35 (STEL), 40 (Osiris), 49 (LHA), 50 (LECI), 77 (Poseidon) and 101 (Orphee), and four departments (CCSIMN, USL2TI, SP2S and DANS) involved in safety or in charge of it. The report describes the requested corrective actions about the quality of the internal diagnosis, about the follow-up of actions and directives, about internal authorizations, about the follow-up of commitments, about second level control, about the management of the return on experience, about interesting events, about the control of subcontractors. Some additional information requests are also formulated

Development and manufacturing of a Nb$_{3}$Sn quadrupole magnet Model at CEA/Saclay for TESLA Interaction Region

CERN Document Server

Durante, Maria; Fratini, M; Leboeuf, D; Segreti, M; Védrine, Pierre; 10.1109/TASC.2004.829129

2004-01-01

One possible application of Nb/sub 3/Sn, whose superconducting properties far exceed those of NbTi, is the fabrication of short and powerful quadrupole magnets for the interaction regions of large particle accelerators. In some projects, as in the future linear collider TESLA, the quadrupole magnets are inside the detector solenoid and must operate in its background field. This situation gives singular Lorentz force distribution in the ends of the magnet. To learn about Nb/sub 3/Sn technology, evaluate fabrication techniques and test the interaction with a solenoidal field, DAPNIA /SACM at CEA/Saclay has started the manufacturing of a 1-m-long, 56- mm-single-aperture quadrupole magnet model. The model relies on the same coil geometry as the LHC arc quadrupole magnets, but has no iron yoke. It will produce a nominal field gradient of 211 T/m at 11,870 A. The coils are wound from Rutherford-type cables insulated with glass fiber tape, before being heat-treated and vacuum-impregnated with epoxy resin. Laminated,...

Fixed J spectral distributions in large shell model spaces. Pt. 3

International Nuclear Information System (INIS)

Jacquemin, C.; Auger, G.; Quesne, C.

1982-01-01

A method is developed to exactly calculate the fixed J quasiparticle centroid energies and partial widths. Some results obtained in the even-mass lead isotopes with various interactions are analysed. Fixed J quasiparticle distributions are used to predict an upper limit for the deviations between the quasiparticle approximation and the shell model results for the low-energy levels. The influence of the states with a high quasiparticle number in the low-energy region is seen to strongly depend upon the interaction. The importance of the dimensionalities and the internal widths is explaining the admixtures is stressed. (orig.)

Absorbing phase transitions in deterministic fixed-energy sandpile models

Science.gov (United States)

Park, Su-Chan

2018-03-01

We investigate the origin of the difference, which was noticed by Fey et al. [Phys. Rev. Lett. 104, 145703 (2010), 10.1103/PhysRevLett.104.145703], between the steady state density of an Abelian sandpile model (ASM) and the transition point of its corresponding deterministic fixed-energy sandpile model (DFES). Being deterministic, the configuration space of a DFES can be divided into two disjoint classes such that every configuration in one class should evolve into one of absorbing states, whereas no configurations in the other class can reach an absorbing state. Since the two classes are separated in terms of toppling dynamics, the system can be made to exhibit an absorbing phase transition (APT) at various points that depend on the initial probability distribution of the configurations. Furthermore, we show that in general the transition point also depends on whether an infinite-size limit is taken before or after the infinite-time limit. To demonstrate, we numerically study the two-dimensional DFES with Bak-Tang-Wiesenfeld toppling rule (BTW-FES). We confirm that there are indeed many thresholds. Nonetheless, the critical phenomena at various transition points are found to be universal. We furthermore discuss a microscopic absorbing phase transition, or a so-called spreading dynamics, of the BTW-FES, to find that the phase transition in this setting is related to the dynamical isotropic percolation process rather than self-organized criticality. In particular, we argue that choosing recurrent configurations of the corresponding ASM as an initial configuration does not allow for a nontrivial APT in the DFES.

Inversion of real and complex phase shifts to potentials by the generalized Cox-Thompson inverse scattering method at fixed energy

International Nuclear Information System (INIS)

Melchert, O; Scheid, W; Apagyi, B

2006-01-01

The Cox-Thompson inverse scattering method at fixed energy has been generalized to treat complex phase shifts derived from experiments. New formulae for relating phase shifts to shifted angular momenta are derived. The method is applied to phase shifts of known potentials in order to test its quality and stability and, further, it is used to invert experimental n-α and n- 12 C phase shifts

Masslessness of ghosts in equivariantly gauge-fixed Yang-Mills theories

International Nuclear Information System (INIS)

Golterman, Maarten; Zimmerman, Leah

2005-01-01

We show that the one-loop ghost self-energy in an equivariantly gauge-fixed Yang-Mills theory vanishes at zero momentum. A ghost mass is forbidden by equivariant BRST symmetry, and our calculation confirms this explicitly. The four-ghost self interaction which appears in the equivariantly gauge-fixed Yang-Mills theory is needed in order to obtain this result

A New Approach to Energy Calculation of Road Accidents against Fixed Small Section Elements Based on Close-Range Photogrammetry

Directory of Open Access Journals (Sweden)

Alejandro Morales

2017-11-01

Full Text Available This paper presents a new approach for energetic analyses of traffic accidents against fixed road elements using close-range photogrammetry. The main contributions of the developed approach are related to the quality of the 3D photogrammetric models, which enable objective and accurate energetic analyses through the in-house tool CRASHMAP. As a result, security forces can reconstruct the accident in a simple and comprehensive way without requiring spreadsheets or external tools, and thus avoid the subjectivity and imprecisions of the traditional protocol. The tool has already been validated, and is being used by the Local Police of Salamanca (Salamanca, Spain for the resolution of numerous accidents. In this paper, a real accident of a car against a fixed metallic pole is analysed, and significant discrepancies are obtained between the new approach and the traditional protocol of data acquisition regarding collision speed and absorbed energy.

Nutrient and organic matter inputs to Hawaiian anchialine ponds: influences of n-fixing and non-n-fixing trees

Science.gov (United States)

Kehauwealani K. Nelson-Kaula; Rebecca Ostertag; R. Flint Hughes; Bruce D. Dudley

2016-01-01

Invasive nitrogen-fixing plants often increase energy and nutrient inputs to both terrestrial and aquatic ecosystems via litterfall, and these effects may be more pronounced in areas lacking native N2-fixers. We examined organic matter and nutrient inputs to and around anchialine ponds...

The liner of the Saturne injector; La chemise capacitive de l'injecteur de saturne

Energy Technology Data Exchange (ETDEWEB)

Prome, M; Remeur, M; Rommel, G; Vienet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

An increasing protons energy injection in the Saclay Protons Synchrotron is described. To realize this type of injection a special equipment is necessary. A description of these different elements of that special equipment is given. (authors) [French] L'injection a energie croissante des protons dans le synchrotron a protons de Saclay est etudiee. Pour realiser ce type d'injection, on doit faire appel a de nouveaux equipements. Une description des elements entrant dans ces equipements est donnee. (auteurs)

Radioisotope licence application: Fixed nuclear gauges

International Nuclear Information System (INIS)

1995-09-01

This guide will assist you in completing and filing an application for a new licence or licence renewal for fixed nuclear gauges in accordance with the Atomic Energy Control Regulations and radioisotope licensing policies. It also provides some of the background information that you will require in order to safely use radioactive materials

Nuclear Energy Division. 2009 Activity report

International Nuclear Information System (INIS)

2009-01-01

After a presentation of the future investment programme of the nuclear energy department at the French national Nuclear Research Center (CEA), this report proposes a description of tomorrow's industrial nuclear systems (back-end of future fuel cycle, fourth generation systems, basic scientific and technological research), describes how current nuclear industrial systems are optimized (front-end and back-end of fuel cycle, second and third generation reactors). It presents the main tools for nuclear development: simulation programme, the Jules Horowitz reactor project, maintenance of specific facilities, research valorisation. It reports the activities related to the clean-up and dismantling in different nuclear sites, presents the activities of CEA's nuclear research centres (Saclay, Cadarache, Marcoule), briefly presents the transverse material programme, recalls some events, and gives some key figures

Event Display for the Fixed Target Experiment BM@N

Directory of Open Access Journals (Sweden)

Gertsenberger Konstantin

2016-01-01

Full Text Available One of the main problems to be solved in modern high energy physics experiments on particle collisions with a fixed target is the visual representation of the events during the experiment run. The article briefly describes the structure of the BM@N facility at the Nuclotron being under construction at the Joint Institute for Nuclear Research with the aim to study properties of the baryonic matter in collisions of ions with fixed target at energies up to 4 GeV/nucleon (for Au79+. Aspects concerning the visualization of data and detector details at the modern experiments and possibilities of practical applications are discussed. We present event display system intended to visualize the detector geometries and events of particle collisions with the fixed target, its options and features as well as integration with BMNRoot software. The examples of graphical representation of simulated and reconstructed points and particle tracks with BM@N geometry are given for central collisions of Au79+ ions with gold target and deuterons with carbon target.

Physics perspectives with AFTER@LHC (A Fixed Target ExpeRiment at LHC

Directory of Open Access Journals (Sweden)

Massacrier L.

2018-01-01

Full Text Available AFTER@LHC is an ambitious fixed-target project in order to address open questions in the domain of proton and neutron spins, Quark Gluon Plasma and high-x physics, at the highest energy ever reached in the fixed-target mode. Indeed, thanks to the highly energetic 7 TeV proton and 2.76 A.TeV lead LHC beams, center-of-mass energies as large as sNN = 115 GeV in pp/pA and sNN = 72 GeV in AA can be reached, corresponding to an uncharted energy domain between SPS and RHIC. We report two main ways of performing fixed-target collisions at the LHC, both allowing for the usage of one of the existing LHC experiments. In these proceedings, after discussing the projected luminosities considered for one year of data taking at the LHC, we will present a selection of projections for light and heavy-flavour production.

Characterization of radioactive graphite and concrete of the reactor ULYSSE/INSTN at CEA/Saclay to be dismantled

International Nuclear Information System (INIS)

Van Lauwe, Aymeric; Ridikas, Danas; Damoy, Francois; Blideanu, Valentin; Fajardo, Christophe; Aubert, Marie-Cecile; Foulon, Francois

2006-01-01

Decommissioning and dismantling of nuclear installations after their service life are connected with the necessity of the disassembling, handling and disposing of a large amount of radioactive material. In order to optimize the disassembling operations, to reduce the undesirable volume to the minimum and to successfully plan the dismantling and disposal of radioactive materials to storage facilities, the radiological characterisation of the material present in the reactor and around its environment should be accurately evaluated. The present work has been done in the framework of the decommissioning and dismantling of the experimental reactor ULYSSE that is presently operating in INSTN/Saclay and will be closed in the middle of 2006. A methodology, already successfully used for another research reactor, is proposed for determining accurately the long-term induced activity of the materials present in the active reactor core and its surroundings. The comparison of theoretical predictions, based on Monte Carlo technique, with experimental values validated the approach and the methodology used in the present study. The goal is to plan efficiently the disassembling and dismantling of the system and to optimise the mass flow going to different waste repositories. We show that this approach might reduce substantially the total cost of decommissioning. (authors)

Fixed Wing Project: Technologies for Advanced Air Transports

Science.gov (United States)

Del Rosario, Ruben; Koudelka, John M.; Wahls, Richard A.; Madavan, Nateri

2014-01-01

The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The presentation will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

Global unitary fixing and matrix-valued correlations in matrix models

International Nuclear Information System (INIS)

Adler, Stephen L.; Horwitz, Lawrence P.

2003-01-01

We consider the partition function for a matrix model with a global unitary invariant energy function. We show that the averages over the partition function of global unitary invariant trace polynomials of the matrix variables are the same when calculated with any choice of a global unitary fixing, while averages of such polynomials without a trace define matrix-valued correlation functions, that depend on the choice of unitary fixing. The unitary fixing is formulated within the standard Faddeev-Popov framework, in which the squared Vandermonde determinant emerges as a factor of the complete Faddeev-Popov determinant. We give the ghost representation for the FP determinant, and the corresponding BRST invariance of the unitary-fixed partition function. The formalism is relevant for deriving Ward identities obeyed by matrix-valued correlation functions

Investigation on the chemically fixing technique of carbon dioxide utilizing solar energy; Taiyo energy riyo ni yoru nisanka tanso no kagakuteki koteika gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

1993-03-01

This report describes the results of effective fixing technique of CO2 by utilizing solar energy. First of all, the investigation was directed to the technique for synthesizing ethylene, hydrocarbons and alcohol by electrochemical reduction of CO2. The power required for this process is supplied by photovoltaic power generation. Development of excellent electrode catalyst is needed because the reduction of CO2 requires a high overvoltage. It is desirable to enhance the selectivity of the reaction for specific material and improve the transport process in the electrolytic cell. Next, designing of material and reaction of photocatalysts using semiconductor electrode and semiconductor particulate was examined. A semiconductor electrode made of FeS2 is inexpensive and has a high ability of collecting solar light. In the category of photocatalysis system, a photocatalytic system in which semiconductor particles are embedded in vesicle and a photpocatalyst based on potassium niobate are noteworthy. As biosystem, the method of reducing CO2 by calcareous algae which simultaneously advances fixing and calcification of CO2 by photosynthesis is noteworthy. 129 refs., 45 figs., 20 tabs.

Semi-analytic equations to the Cox-Thompson inverse scattering method at fixed energy for special cases

International Nuclear Information System (INIS)

Palmai, T.; Apagyi, B.; Horvath, M.

2008-01-01

Solution of the Cox-Thompson inverse scattering problem at fixed energy 1-3 is reformulated resulting in semi-analytic equations. The new set of equations for the normalization constants and the nonphysical (shifted) angular momenta are free of matrix inversion operations. This simplification is a result of treating only the input phase shifts of partial waves of a given parity. Therefore, the proposed method can be applied for identical particle scattering of the bosonic type (or for certain cases of identical fermionic scattering). The new formulae are expected to be numerically more efficient than the previous ones. Based on the semi-analytic equations an approximate method is proposed for the generic inverse scattering problem, when partial waves of arbitrary parity are considered. (author)

Vertical orbit excursion fixed field alternating gradient accelerators

Directory of Open Access Journals (Sweden)

Stephen Brooks

2013-08-01

Full Text Available Fixed field alternating gradient (FFAG accelerators with vertical orbit excursion (VFFAGs provide a promising alternative design for rings with fixed-field superconducting magnets. They have a vertical magnetic field component that increases with height in the vertical aperture, yielding a skew quadrupole focusing structure. Scaling-type VFFAGs are found with fixed tunes and no intrinsic limitation on momentum range. This paper presents the first multiparticle tracking of such machines. Proton driver rings to accelerate the 800 MeV beam from the ISIS synchrotron are presented, in terms of both magnet field geometry and longitudinal behavior during acceleration with space charge. The 12 GeV ring produces an output power of at least 2.18 MW. Possible applications of VFFAGs to waste transmutation, hadron therapy, and energy-recovery electron accelerators are also discussed.

Superconducting magnets in nuclear and high energy physics

International Nuclear Information System (INIS)

Hamelin, J.; Parain, J.; Perot, J.; Lesmond, C.

1976-01-01

A few examples of superconducting magnets developped at Saclay for high energy physics are presented. The OGA doublet is a large acceptance optical system consisting of two quadrupoles with maximum field gradients of 35 and 23 teslas per meter giving an increase of the beam acceptance by a factor 4. The ALEC dipole is a synchrotron magnet with a length of 1.5 meter and a field of 5 teslas, operating in pulse made at a frequency of 0.1 Hertz and entirely constructed in industry. The ECO project is a demonstration of electrical energy saving by means of superconductors. It consists in the replacement of conventional copper of a classical beam transport magnet by superconducting windings. The use of superconductors for polarized target magnets allows a large variety of configurations to be obtained in order to satisfy the acceptance and space requirements to the detectors around the targets [fr

Wide angle spectrometers for intermadiate energy electron accelerators

International Nuclear Information System (INIS)

Leconte, P.

1982-10-01

It is shown that improvements of the detector acceptances (in solid angle and momentum bite) is as important as increased duty cycle for coincidence experiments. To have a maximum efficiency and thus to reduce the cost of experiments, it is imperative to develop maximum solid angle systems. This implies an axial symmetry with respect to the incoming beam. At Saclay, we have investigated some of the properties of specific detectors covering up to 90% of 4π steradians for a high energy, 100% duty cycle electron accelerator. The techniques of wide angle spectrometers have already been explored on a large scale in high energy physics. However, in the case of charged particles, such detectors, compared to classical iron dipole spectrometers, present a smaller resolving power and a rather low background rejection. The choice of which of these two solutions is to be used depends on the conditions of the specific experiment

Hot laboratory in Saclay. Equipment and radio-metallurgy technique of the hot lab in Saclay. Description of hot cell for handling of plutonium salts. Installation of an hot cell

International Nuclear Information System (INIS)

Bazire, R.; Blin, J.; Cherel, G.; Duvaux, Y.; Cherel, G.; Mustelier, J.P.; Bussy, P.; Gondal, G.; Bloch, J.; Faugeras, P.; Raggenbass, A.; Raggenbass, P.; Fufresne, J.

1959-01-01

Describes the conception and installation of the hot laboratory in Saclay (CEA, France). The construction ended in 1958. The main aim of this laboratory is to examine fuel rods of EL2 and EL3 as well as nuclear fuel studies. It is placed in between both reactors. In a first part, the functioning and specifications of the hot lab are given. The different hot cells are described with details of the ventilation and filtration system as well as the waste material and effluents disposal. The different safety measures are explained: description of the radiation protection, decontamination room and personnel monitoring. The remote handling equipment is composed of cutting and welding machine controlled with manipulators. Periscopes are used for sight control of the operation. In a second part, it describes the equipment of the hot lab. The unit for an accurate measurement of the density of irradiated uranium is equipped with an high precision balance and a thermostat. The equipment used for the working of irradiated uranium is described and the time length of each operation is given. There is also an installation for metallographic studies which is equipped with a manipulation bench for polishing and cleaning surfaces and a metallographic microscope. X-ray examination of uranium pellets will also be made and results will be compared with those of metallography. The last part describes the hot cells used for the manipulation of plutonium salts. The plutonium comes from the reprocessing plant and arrived as a nitric solution. Thus these cells are used to study the preparation of plutonium fluorides from nitric solution. The successive operations needed are explained: filtration, decontamination and extraction with TBP, purification on ion exchangers and finally formation of the plutonium fluorides. Particular attention has been given to the description of the specifications of the different gloveboxes and remote handling equipment used in the different reaction steps and

Common fixed point theorems for fuzzy mappings in metric space under φ-contraction condition

International Nuclear Information System (INIS)

Abu-Donia, H.M.

2007-01-01

Some common fixed point theorems for multi-valued mappings under φ-contraction condition have been studied by Rashwan [Rashwan RA, Ahmed MA. Fixed points for φ-contraction type multivalued mappings. J Indian Acad Math 1995;17(2):194-204]. Butnariu [Butnariu D. Fixed point for fuzzy mapping. Fuzzy Sets Syst 1982;7:191-207] and Helipern [Hilpern S. Fuzzy mapping and fixed point theorem. J Math Anal Appl 1981;83:566-9] also, discussed some fixed point theorems for fuzzy mappings in the category of metric spaces. In this paper, we discussed some common fixed point theorems for fuzzy mappings in metric space under φ-contraction condition. Our investigation are related to the fuzzy form of Hausdorff metric which is a basic tool for computing Hausdorff dimensions. These dimensions help in understanding ε ∞ -space [El-Naschie MS. On the unification of the fundamental forces and complex time in the ε ∞ -space. Chaos, Solitons and Fractals 2000;11:1149-62] and are used in high energy physics [El-Naschie MS. Wild topology hyperbolic geometry and fusion algebra of high energy particle physics. Chaos, Solitons and Fractals 2002;13:1935-45

Common fixed point theorems for fuzzy mappings in metric space under {phi}-contraction condition

Energy Technology Data Exchange (ETDEWEB)

Abu-Donia, H.M. [Department of Mathematics, Faculty of Science, Zagazig University, Zagazig (Egypt)

2007-10-15

Some common fixed point theorems for multi-valued mappings under {phi}-contraction condition have been studied by Rashwan [Rashwan RA, Ahmed MA. Fixed points for {phi}-contraction type multivalued mappings. J Indian Acad Math 1995;17(2):194-204]. Butnariu [Butnariu D. Fixed point for fuzzy mapping. Fuzzy Sets Syst 1982;7:191-207] and Helipern [Hilpern S. Fuzzy mapping and fixed point theorem. J Math Anal Appl 1981;83:566-9] also, discussed some fixed point theorems for fuzzy mappings in the category of metric spaces. In this paper, we discussed some common fixed point theorems for fuzzy mappings in metric space under {phi}-contraction condition. Our investigation are related to the fuzzy form of Hausdorff metric which is a basic tool for computing Hausdorff dimensions. These dimensions help in understanding {epsilon} {sup {infinity}}-space [El-Naschie MS. On the unification of the fundamental forces and complex time in the {epsilon} {sup {infinity}}-space. Chaos, Solitons and Fractals 2000;11:1149-62] and are used in high energy physics [El-Naschie MS. Wild topology hyperbolic geometry and fusion algebra of high energy particle physics. Chaos, Solitons and Fractals 2002;13:1935-45].

Preparing and measuring ultra-small radiocarbon samples with the ARTEMIS AMS facility in Saclay, France

Energy Technology Data Exchange (ETDEWEB)

Delque-Kolic, E., E-mail: emmanuelle.delque-kolic@cea.fr [LMC14, CEA Saclay, Batiment 450 Porte 4E, 91191 Gif sur Yvette (France); Comby-Zerbino, C.; Ferkane, S.; Moreau, C.; Dumoulin, J.P.; Caffy, I.; Souprayen, C.; Quiles, A.; Bavay, D.; Hain, S.; Setti, V. [LMC14, CEA Saclay, Batiment 450 Porte 4E, 91191 Gif sur Yvette (France)

2013-01-15

The ARTEMIS facility in Saclay France measures, on average, 4500 samples a year for French organizations working in an array of fields, including environmental sciences, archeology and hydrology. In response to an increasing demand for the isolation of specific soil compounds and organic water fractions, we were motivated to evaluate our ability to reduce microgram samples using our standard graphitization lines and to measure the graphite thus obtained with our 3MV NEC Pelletron AMS. Our reduction facility consists of two fully automated graphitization lines. Each line has 12 reduction reactors with a reduction volume of 18 ml for the first line and 12 ml for the second. Under routine conditions, we determined that we could reduce the samples down to 10 {mu}g of carbon, even if the graphitization yield is consequently affected by the lower sample mass. Our results when testing different Fe/C ratios suggest that an amount of 1.5 mg of Fe powder was ideal (instead of lower amounts of catalyst) to prevent the sample from deteriorating too quickly under the Cs+ beam, and to facilitate pressing procedures. Several sets of microsamples produced from HOxI standard, international references and backgrounds were measured. When measuring {sup 14}C-free wood charcoal and HOxI samples we determined that our modern and dead blanks, due to the various preparation steps, were of 1.1 {+-} 0.8 and 0.2 {+-} 0.1 {mu}g, respectively. The results presented here were obtained for IAEA-C1, {sup 14}C-free wood, IAEA-C6, IAEA-C2 and FIRI C.

Preparing and measuring ultra-small radiocarbon samples with the ARTEMIS AMS facility in Saclay, France

International Nuclear Information System (INIS)

Delqué-Količ, E.; Comby-Zerbino, C.; Ferkane, S.; Moreau, C.; Dumoulin, J.P.; Caffy, I.; Souprayen, C.; Quilès, A.; Bavay, D.; Hain, S.; Setti, V.

2013-01-01

The ARTEMIS facility in Saclay France measures, on average, 4500 samples a year for French organizations working in an array of fields, including environmental sciences, archeology and hydrology. In response to an increasing demand for the isolation of specific soil compounds and organic water fractions, we were motivated to evaluate our ability to reduce microgram samples using our standard graphitization lines and to measure the graphite thus obtained with our 3MV NEC Pelletron AMS. Our reduction facility consists of two fully automated graphitization lines. Each line has 12 reduction reactors with a reduction volume of 18 ml for the first line and 12 ml for the second. Under routine conditions, we determined that we could reduce the samples down to 10 μg of carbon, even if the graphitization yield is consequently affected by the lower sample mass. Our results when testing different Fe/C ratios suggest that an amount of 1.5 mg of Fe powder was ideal (instead of lower amounts of catalyst) to prevent the sample from deteriorating too quickly under the Cs+ beam, and to facilitate pressing procedures. Several sets of microsamples produced from HOxI standard, international references and backgrounds were measured. When measuring 14 C-free wood charcoal and HOxI samples we determined that our modern and dead blanks, due to the various preparation steps, were of 1.1 ± 0.8 and 0.2 ± 0.1 μg, respectively. The results presented here were obtained for IAEA-C1, 14 C-free wood, IAEA-C6, IAEA-C2 and FIRI C.

Hot laboratory in Saclay. Equipment and radio-metallurgy technique of the hot lab in Saclay. Description of hot cell for handling of plutonium salts. Installation of an hot cell; Laboratoire a tres haute activite de Saclay. Equipement et techniques radiometallurgiques du laboratoire a haute activite de Saclay. Description de cellules pour manipulation de sels de plutonium. Amenagement d'une cellule du laboratoire de haute activite

Energy Technology Data Exchange (ETDEWEB)

Bazire, R; Blin, J; Cherel, G; Duvaux, Y; Cherel, G; Mustelier, J P; Bussy, P; Gondal, G; Bloch, J; Faugeras, P; Raggenbass, A; Raggenbass, P; Fufresne, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1959-07-01

Describes the conception and installation of the hot laboratory in Saclay (CEA, France). The construction ended in 1958. The main aim of this laboratory is to examine fuel rods of EL2 and EL3 as well as nuclear fuel studies. It is placed in between both reactors. In a first part, the functioning and specifications of the hot lab are given. The different hot cells are described with details of the ventilation and filtration system as well as the waste material and effluents disposal. The different safety measures are explained: description of the radiation protection, decontamination room and personnel monitoring. The remote handling equipment is composed of cutting and welding machine controlled with manipulators. Periscopes are used for sight control of the operation. In a second part, it describes the equipment of the hot lab. The unit for an accurate measurement of the density of irradiated uranium is equipped with an high precision balance and a thermostat. The equipment used for the working of irradiated uranium is described and the time length of each operation is given. There is also an installation for metallographic studies which is equipped with a manipulation bench for polishing and cleaning surfaces and a metallographic microscope. X-ray examination of uranium pellets will also be made and results will be compared with those of metallography. The last part describes the hot cells used for the manipulation of plutonium salts. The plutonium comes from the reprocessing plant and arrived as a nitric solution. Thus these cells are used to study the preparation of plutonium fluorides from nitric solution. The successive operations needed are explained: filtration, decontamination and extraction with TBP, purification on ion exchangers and finally formation of the plutonium fluorides. Particular attention has been given to the description of the specifications of the different gloveboxes and remote handling equipment used in the different reaction steps and

Hot laboratory in Saclay. Equipment and radio-metallurgy technique of the hot lab in Saclay. Description of hot cell for handling of plutonium salts. Installation of an hot cell; Laboratoire a tres haute activite de Saclay. Equipement et techniques radiometallurgiques du laboratoire a haute activite de Saclay. Description de cellules pour manipulation de sels de plutonium. Amenagement d'une cellule du laboratoire de haute activite

Energy Technology Data Exchange (ETDEWEB)

Bazire, R.; Blin, J.; Cherel, G.; Duvaux, Y.; Cherel, G.; Mustelier, J.P.; Bussy, P.; Gondal, G.; Bloch, J.; Faugeras, P.; Raggenbass, A.; Raggenbass, P.; Fufresne, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1959-07-01

Describes the conception and installation of the hot laboratory in Saclay (CEA, France). The construction ended in 1958. The main aim of this laboratory is to examine fuel rods of EL2 and EL3 as well as nuclear fuel studies. It is placed in between both reactors. In a first part, the functioning and specifications of the hot lab are given. The different hot cells are described with details of the ventilation and filtration system as well as the waste material and effluents disposal. The different safety measures are explained: description of the radiation protection, decontamination room and personnel monitoring. The remote handling equipment is composed of cutting and welding machine controlled with manipulators. Periscopes are used for sight control of the operation. In a second part, it describes the equipment of the hot lab. The unit for an accurate measurement of the density of irradiated uranium is equipped with an high precision balance and a thermostat. The equipment used for the working of irradiated uranium is described and the time length of each operation is given. There is also an installation for metallographic studies which is equipped with a manipulation bench for polishing and cleaning surfaces and a metallographic microscope. X-ray examination of uranium pellets will also be made and results will be compared with those of metallography. The last part describes the hot cells used for the manipulation of plutonium salts. The plutonium comes from the reprocessing plant and arrived as a nitric solution. Thus these cells are used to study the preparation of plutonium fluorides from nitric solution. The successive operations needed are explained: filtration, decontamination and extraction with TBP, purification on ion exchangers and finally formation of the plutonium fluorides. Particular attention has been given to the description of the specifications of the different gloveboxes and remote handling equipment used in the different reaction steps and

Saclay. German press trip 26 september 2000

International Nuclear Information System (INIS)

Dupeyrat, B.; Bergeonneau, Ph.; Lagarde, P.; Sollogoub, P.; Menez, A.

2000-09-01

In the framework of the public information on the CEA, a presentation of the CEA activities facing the world energy is proposed. A first speech presents the new energy panorama with the emergence of the energy market deregulation and the unification process. It answers to the question of the nuclear place in this context and more particularly, the second part deals with the dismantling of old installations in the world and the radioactive wastes management. The specificities of the CEA, facing the other countries, are defined. (A.L.B.)

Micro-scale piezoelectric vibration energy harvesting: From fixed-frequency to adaptable-frequency devices

Science.gov (United States)

Miller, Lindsay Margaret

hundred milliwatts and are falling steadily as improvements are made, it is feasible to use energy harvesting to power WSNs. This research begins by presenting the results of a thorough survey of ambient vibrations in the machine room of a large campus building, which found that ambient vibrations are low frequency, low amplitude, time varying, and multi-frequency. The modeling and design of fixed-frequency micro scale energy harvesters are then presented. The model is able to take into account rotational inertia of the harvester's proof mass and it accepts arbitrary measured acceleration input, calculating the energy harvester's voltage as an output. The fabrication of the micro electromechanical system (MEMS) energy harvesters is discussed and results of the devices harvesting energy from ambient vibrations are presented. The harvesters had resonance frequencies ranging from 31 - 232 Hz, which was the lowest reported in literature for a MEMS device, and produced 24 pW/g2 - 10 nW/g2 of harvested power from ambient vibrations. A novel method for frequency modification of the released harvester devices using a dispenser printed mass is then presented, demonstrating a frequency shift of 20 Hz. Optimization of the MEMS energy harvester connected to a resistive load is then presented, finding that the harvested power output can be increased to several microwatts with the optimized design as long as the driving frequency matches the harvester's resonance frequency. A framework is then presented to allow a similar optimization to be conducted with the harvester connected to a synchronously switched pre-bias circuit. With the realization that the optimized energy harvester only produces usable amounts of power if the resonance frequency and driving frequency match, which is an unrealistic situation in the case of ambient vibrations which change over time and are not always known a priori, an adaptable-frequency energy harvester was designed. The adaptable-frequency harvester

Beyond the technological fix. [Detrimental and unforeseen side effects

Energy Technology Data Exchange (ETDEWEB)

Weinberg, A.M.

1978-03-01

Both technological and social fixes are likely to bring with them deterimental and unforeseen side effects. Although the perceived side effects of nuclear energy can undoubtedly be ameliorated by improved technology, a permanent institutional infrastructure will probably also be required. It is pointed out that confinement of nuclear energy to relatively few large sites rather than many small sites may be a first step toward creating this permanent institutional infrastructure.

Fixed Points

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

International dosimetry experiment on the zero power pile of the Boris Kidric Institute at Vinca (Yugoslavia) (1961)

International Nuclear Information System (INIS)

Weill, J.; Furet, J.; Baillet, J.; Donvez, G.; Duchene, J.; Gras, R.; Mercier, R.; Chenouard, J.; Lecomte, J.

1961-01-01

On the occasion of the international dosimetry experiment on the zero power pile of the Yugoslavian Atomic Energy Centre at Vinca, the Commissariat a l'energie Atomique had agreed to prepare the measurement and security equipment and see to the manipulation of the heavy water, and in addition was responsible for the operation and the starting up of the pile during the experiment. The measurement and security apparatus, developed at Saclay and installed on the pile for low and high pressure runs, is listed, together with the safety equipment added near the control room. The various operations and manipulations carried out on the pile are described: filling with heavy water, starting up, determination of the critical level, testing the efficiency of the rods, operating the pile during the experiments. By operating to a carefully planned schedule, the experiments were, finished before the date fixed by the International Atomic Agency. (authors) [fr

Saclay - 50 years / CEA 1945-95

International Nuclear Information System (INIS)

Anon.

1995-01-01

Central in the infrastructure through which France obtains some 80% of its electric power from nuclear energy stands the French Atomic Energy Authority (Commissariat à l'Energie Atomique - CEA). This year the CEA celebrates its Golden Jubilee. Mastery of nuclear energy goes hand-in-hand with fundamental research in the fields of nuclear and sub-nuclear physics, and the founders of the CEA, like F. Joliot and F. Perrin, considered it essential to relaunch fundamental research in France after the Second World War. In particular, A. Messiah's courses on quantum mechanics made a considerable contribution to the re-establishment of a French school of atomic and sub-atomic physics. As the CEA expanded and nuclear industry grew up, the need was shown for close links between fundamental research and its applications. In addition, the CEA realized how important it was to become a part of the national and international scientific community as highly effective cooperation was developing. The CEA has drawn a wealth of scientific, cultural and intellectual benefits from its collaboration with CERN. During the same period, as fundamental particle physics research has been making spectacular progress, its requirements have grown commensurately. It is not therefore surprising that CERN needs partners capable of bringing together the domains of fundamental research and major equipment and of promoting a dialogue between research and industry. As was pointed out by Jacques Haissinski, head of the Department of Astrophysics, Particle Physics, Nuclear Physics and Associated Instruments (DAPNIA), the CEA, set up to develop major programmes for applying nuclear processes, is particularly well equipped to design, build and operate the huge instruments for exploring the infinitely small and the infinitely large. Tomorrow's nuclear industry needs and will continue to need fundamental research, with its openness and its cooperation. Particle physics needs and will continue

Nuclear energy Division - 2011 Activity report

International Nuclear Information System (INIS)

2012-01-01

This document reports the activity of the Nuclear Energy Department (DEN) within the CEA. It evokes its international relationship (participation to international initiatives, cooperation with different countries), describes the scientific activity within the DEN, presents the Advanced Material Program, and the activities undertaken in different fields: future nuclear industrial systems (fourth generation reactors, downstream part of the future fuel cycle, fundamental scientific and technological research), optimization of the present nuclear industrial activity (second and third generation reactors, nuclear security, upstream and downstream part of the present fuel cycle), tools for nuclear development (numerical simulation, Jules Horowitz reactor), cleaning up and nuclear dismantling (dismantling strategy, the Passage project in Grenoble, works in Marcoule, the Aladin project in Fontenay, waste and material flow management, nuclear support installations, transports). It finally addresses the specific activities of the Marcoule, Cadarache and Saclay centres

Fiscal 2000 report on results on development of technology for reducing electrical power consumption at standby time and on R and D of energy saving fixing system; 2000 nendo taikiji shohi denryoku sakugen gijutsu kaihatsu seika hokokusho. Sho energy teichaku system no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In reference to 20 to 40 cpm letter size monochrome digital copiers, R and D was conducted for the purpose of developing an energy-saving fixing system by the combination of a thin-layer thermal-roller fixing unit and a low-fixing-temperature polymerized toner, with the fiscal 2000 results compiled. In the development of the thin-layer thermal-roller fixing unit, a fixing system suitable for toner characteristics was completed, through the optimization of a temperature-stabilizing cooling fan and by a mechanism for detecting anomalous high temperature at the time of a runaway heater, for example. In the research of the low-fixing-temperature polymerized toner, efforts were made toward improving somewhat weak electrostatic chargeability, which was a conventional problem in toner characteristics, and enhancing the thermal/mechanical durability of the toner. In the method of improving electrostatic chargeability, a new process was developed capable of effectively functioning additives in a toner, attaining a level practically free from problems. In the heat resisting characteristic, its enhancement was achieved by developing a method that checks no fused fixing performance at the time of heating for fixing and that imparts a new heat resistivity to a latex surface layer less susceptible to heat inside a copier. (NEDO)

Laboratory portrait: the Saclay nuclear physics division

International Nuclear Information System (INIS)

Alamanos, N.; Auger, F.

2005-01-01

The research activities of the nuclear physics division (SPHN) of DAPNIA (Cea) take place within strong national and international collaborations. Its programs cover a broad range of topics in nuclear physics from low to high energies, they include the structure and dynamics of the nucleus, the structure of the nucleon, the search for phase transitions in nuclear matter, and contribution to the development of nuclear energy. Concerning the structure of the nucleus, SPHN is involved in the study of the structure of light exotic nuclei such as He 6-8 , C 10-11 , Ne 27 and in the study of shape coexistence in Kr isotopes. The experiments are performed at GANIL. SPHN is also involved in the study of the structure of Md 251 through experiments made in Finland. Near-barrier and sub-barrier fusion of light unstable nuclei and their respective stable isotopes with U 238 targets are studied in Louvain-la-Neuve (Belgium). Concerning nuclear phase transitions, the purpose of our activities is twofold: the study of the liquid-gas phase transition in nuclei at relatively low incident energies and the search for the quark-gluon plasma (QGP) at very high energies. We look for QGP signatures in 2 experiments: Phenix with the accelerator RHIC at Bnl and Alice at the LHC (CERN). Concerning the structure of the nucleon, SPHN is involved in 2 experimental programs both using electromagnetic probes, one to obtain information on the spin carried by the gluons in the proton (Compass at CERN) and the other to extract information on generalized parton distributions by means of deeply virtual Compton scattering (Clas at Jlab). Concerning nuclear energy, the activities are focused along 3 main lines: spallation studies, neutron cross-section measurements and application oriented modeling. (A.C.)

Noise power spectrum of the fixed pattern noise in digital radiography detectors

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Sik, E-mail: dskim@hufs.ac.kr [Department of Electronics Engineering, Hankuk University of Foreign Studies, Gyeonggi-do 449-791 (Korea, Republic of); Kim, Eun [R& D Center, DRTECH Co., Gyeonggi-do 13558 (Korea, Republic of)

2016-06-15

Purpose: The fixed pattern noise in radiography image detectors is caused by various sources. Multiple readout circuits with gate drivers and charge amplifiers are used to efficiently acquire the pixel voltage signals. However, the multiple circuits are not identical and thus yield nonuniform system gains. Nonuniform sensitivities are also produced from local variations in the charge collection elements. Furthermore, in phosphor-based detectors, the optical scattering at the top surface of the columnar CsI growth, the grain boundaries, and the disorder structure causes spatial sensitivity variations. These nonuniform gains or sensitivities cause fixed pattern noise and degrade the detector performance, even though the noise problem can be partially alleviated by using gain correction techniques. Hence, in order to develop good detectors, comparative analysis of the energy spectrum of the fixed pattern noise is important. Methods: In order to observe the energy spectrum of the fixed pattern noise, a normalized noise power spectrum (NNPS) of the fixed pattern noise is considered in this paper. Since the fixed pattern noise is mainly caused by the nonuniform gains, we call the spectrum the gain NNPS. We first asymptotically observe the gain NNPS and then formulate two relationships to calculate the gain NNPS based on a nonuniform-gain model. Since the gain NNPS values are quite low compared to the usual NNPS, measuring such a low NNPS value is difficult. By using the average of the uniform exposure images, a robust measuring method for the gain NNPS is proposed in this paper. Results: By using the proposed measuring method, the gain NNPS curves of several prototypes of general radiography and mammography detectors were measured to analyze their fixed pattern noise properties. We notice that a direct detector, which is based on the a-Se photoconductor, showed lower gain NNPS than the indirect-detector case, which is based on the CsI scintillator. By comparing the gain

Fixed-target physics at LHCb

CERN Document Server

Maurice, Emilie Amandine

2017-01-01

The LHCb experiment has the unique possibility, among the LHC experiments, to be operated in fixed target mode, using its internal gas target SMOG. The energy scale achievable at the LHC and the excellent detector capabilities for vertexing, tracking and particle identification allow a wealth of measurements of great interest for cosmic ray and heavy ions physics. We report the first measurements made in this configuration: the measurement of antiproton production in proton-helium collisions and the measurements of open and hidden charm production in proton-argon collisions at $\\sqrt{s_\\textrm{NN}} =$ 110 GeV.

How should fixed costs in the network be covered?

International Nuclear Information System (INIS)

1999-01-01

The report examines how tariffs that are only meant to cover costs in the transmission network should be formulated. Should the tariffs be based on power figures, such as for instance installed production capacity, or on an energy figure such as total annual energy production? Tariffs based on the producers' installed production capacity will in the long run cause the prises to rise under peak loads while tariffs based on generated energy elevate the consumer price by a small amount for all load segments. Thus, tariffs based on installed power capacity cause greater price distortion and greater socio-economic losses than energy tariffs. There are good arguments that fixed costs should mainly be paid by consumers with inelastic demand

Fuel rod fixing system

International Nuclear Information System (INIS)

Christiansen, D.W.

1982-01-01

This is a reusable system for fixing a nuclear reactor fuel rod to a support. An interlock cap is fixed to the fuel rod and an interlock strip is fixed to the support. The interlock cap has two opposed fingers, which are shaped so that a base is formed with a body part. The interlock strip has an extension, which is shaped so that this is rigidly fixed to the body part of the base. The fingers of the interlock cap are elastic in bending. To fix it, the interlock cap is pushed longitudinally on to the interlock strip, which causes the extension to bend the fingers open in order to engage with the body part of the base. To remove it, the procedure is reversed. (orig.) [de

Physical-Mathematical Model for Fixed-Bed Solid Fuel Gasification Process Simulation

Directory of Open Access Journals (Sweden)

Slyusarskiy Konstantin V.

2017-01-01

Full Text Available Phycial-mathmatical model for fixed-bed coal gasification process simulation is proposed. The heterogeneous carbon oxidation chemical reactions were simulated via Arrhenius equation while homogeneous reactions in gas phase were calculated using Gibbs free energy minimization procedure. The syngas component concentration field and fuel conversion distribution as well as syngas final temperature and composition were defined for fixed bed gasification of T-grade coal of Kuznetskiy deposit. The optimal fuel residence time and gasifyer specific productivity were defined. The prevail reactions in oxidizing and reduction zones together with its height were defined.

Scaling of brain metabolism with a fixed energy budget per neuron: implications for neuronal activity, plasticity and evolution.

Science.gov (United States)

Herculano-Houzel, Suzana

2011-03-01

It is usually considered that larger brains have larger neurons, which consume more energy individually, and are therefore accompanied by a larger number of glial cells per neuron. These notions, however, have never been tested. Based on glucose and oxygen metabolic rates in awake animals and their recently determined numbers of neurons, here I show that, contrary to the expected, the estimated glucose use per neuron is remarkably constant, varying only by 40% across the six species of rodents and primates (including humans). The estimated average glucose use per neuron does not correlate with neuronal density in any structure. This suggests that the energy budget of the whole brain per neuron is fixed across species and brain sizes, such that total glucose use by the brain as a whole, by the cerebral cortex and also by the cerebellum alone are linear functions of the number of neurons in the structures across the species (although the average glucose consumption per neuron is at least 10× higher in the cerebral cortex than in the cerebellum). These results indicate that the apparently remarkable use in humans of 20% of the whole body energy budget by a brain that represents only 2% of body mass is explained simply by its large number of neurons. Because synaptic activity is considered the major determinant of metabolic cost, a conserved energy budget per neuron has several profound implications for synaptic homeostasis and the regulation of firing rates, synaptic plasticity, brain imaging, pathologies, and for brain scaling in evolution.

Scaling of brain metabolism with a fixed energy budget per neuron: implications for neuronal activity, plasticity and evolution.

Directory of Open Access Journals (Sweden)

Suzana Herculano-Houzel

Full Text Available It is usually considered that larger brains have larger neurons, which consume more energy individually, and are therefore accompanied by a larger number of glial cells per neuron. These notions, however, have never been tested. Based on glucose and oxygen metabolic rates in awake animals and their recently determined numbers of neurons, here I show that, contrary to the expected, the estimated glucose use per neuron is remarkably constant, varying only by 40% across the six species of rodents and primates (including humans. The estimated average glucose use per neuron does not correlate with neuronal density in any structure. This suggests that the energy budget of the whole brain per neuron is fixed across species and brain sizes, such that total glucose use by the brain as a whole, by the cerebral cortex and also by the cerebellum alone are linear functions of the number of neurons in the structures across the species (although the average glucose consumption per neuron is at least 10× higher in the cerebral cortex than in the cerebellum. These results indicate that the apparently remarkable use in humans of 20% of the whole body energy budget by a brain that represents only 2% of body mass is explained simply by its large number of neurons. Because synaptic activity is considered the major determinant of metabolic cost, a conserved energy budget per neuron has several profound implications for synaptic homeostasis and the regulation of firing rates, synaptic plasticity, brain imaging, pathologies, and for brain scaling in evolution.

Scaling of Brain Metabolism with a Fixed Energy Budget per Neuron: Implications for Neuronal Activity, Plasticity and Evolution

Science.gov (United States)

Herculano-Houzel, Suzana

2011-01-01

It is usually considered that larger brains have larger neurons, which consume more energy individually, and are therefore accompanied by a larger number of glial cells per neuron. These notions, however, have never been tested. Based on glucose and oxygen metabolic rates in awake animals and their recently determined numbers of neurons, here I show that, contrary to the expected, the estimated glucose use per neuron is remarkably constant, varying only by 40% across the six species of rodents and primates (including humans). The estimated average glucose use per neuron does not correlate with neuronal density in any structure. This suggests that the energy budget of the whole brain per neuron is fixed across species and brain sizes, such that total glucose use by the brain as a whole, by the cerebral cortex and also by the cerebellum alone are linear functions of the number of neurons in the structures across the species (although the average glucose consumption per neuron is at least 10× higher in the cerebral cortex than in the cerebellum). These results indicate that the apparently remarkable use in humans of 20% of the whole body energy budget by a brain that represents only 2% of body mass is explained simply by its large number of neurons. Because synaptic activity is considered the major determinant of metabolic cost, a conserved energy budget per neuron has several profound implications for synaptic homeostasis and the regulation of firing rates, synaptic plasticity, brain imaging, pathologies, and for brain scaling in evolution. PMID:21390261

Characterizing fixed points

Directory of Open Access Journals (Sweden)

Sanjo Zlobec

2017-04-01

Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

New Fixed-Target Experiments to Search for Dark Gauge Forces

Energy Technology Data Exchange (ETDEWEB)

Bjorken, James D.; Essig, Rouven; Schuster, Philip; /SLAC; Toro, Natalia; /Stanford U., ITP

2010-06-11

Fixed-target experiments are ideally suited for discovering new MeV-GeV mass U(1) gauge bosons through their kinetic mixing with the photon. In this paper, we identify the production and decay properties of new light gauge bosons that dictate fixed-target search strategies. We summarize existing limits and suggest five new experimental approaches that we anticipate can cover most of the natural parameter space, using currently operating GeV-energy beams and well-established detection methods. Such experiments are particularly timely in light of recent terrestrial and astrophysical anomalies (PAMELA, FERMI, DAMA/LIBRA, etc.) consistent with dark matter charged under a new gauge force.

K-FIX: a computer program for transient, two-dimensional, two-fluid flow

International Nuclear Information System (INIS)

Rivard, W.C.; Torrey, M.D.

1976-11-01

The transient dynamics of two-dimensional, two-phase flow with interfacial exchange are calculated at all flow speeds using the K-FIX program. Each phase is described in terms of its own density, velocity, and temperature. The six field equations for the two phases couple through mass, momentum, and energy exchange. The equations are solved using an Eulerian finite difference technique that implicitly couples the rates of phase transitions, momentum, and energy exchange to determination of the pressure, density, and velocity fields. The implicit solution is accomplished iteratively without linearizing the equations, thus eliminating the need for numerous derivative terms. K-FIX is written in a highly modular form to be easily adaptable to a variety of problems. It is applied to growth of an isolated steam bubble in a superheated water pool

Infrared fixed points and fixed lines in the top-bottom-tau sector in supersymmetric grand unification

International Nuclear Information System (INIS)

Schrempp, B.

1994-10-01

The two loop 'top-down' renormalization group flow for the top, bottom and tau Yukawa couplings, from μ=M GUT ≅O(10 16 GeV) to μ≅m t , is explored in the framework of supersymmetric grand unification; reproduction of the physical bottom and tau masses is required. Instead of following the recent trend of implementing exact Yukawa coupling unification i) a search for infrared (IR) fixed lines and fixed points in the m t pole -tan β plane is performed and ii) the extent to which these imply approximate Yukawa unification is determined. In the m t pole -tan β plane two IR fixed lines, intersecting in an IR fixed point, are located. The more attractive fixed line has a branch of almost constant top mass, m t pole ≅168≅180 GeV (close to the experimental value), for the large interval 2.5 GUT approximately. The less attractive fixed line as well as the fixed point at m t pole ≅170 GeV, tan β≅55 implement approximate top-bottom Yukawa unification at all scales μ. The renormalization group flow is attracted towards the IR fixed point by way of the more attractive IR fixed line. The fixed point and lines are distinct from the much quoted effective IR fixed point m t pole ≅O(200 GeV) sin β. (orig.)

A new 6d fixed point from holography

Energy Technology Data Exchange (ETDEWEB)

Apruzzi, Fabio [Department of Physics, University of North Carolina,Chapel Hill, NC 27599 (United States); CUNY Graduate Center, Initiative for the Theoretical Sciences,New York, NY 10016 (United States); Department of Physics, Columbia University,New York, NY 10027 (United States); Dibitetto, Giuseppe; Tizzano, Luigi [Department of Physics and Astronomy, Uppsala university,Box 516, SE-75120 Uppsala (Sweden)

2016-11-22

We propose a stringy construction giving rise to a class of interacting and non-supersymmetric CFT’s in six dimensions. Such theories may be obtained as an IR conformal fixed point of an RG flow ending up in a (1,0) theory in the UV. We provide the due holographic evidence in the context of massive type IIA on AdS{sub 7}×M{sub 3}, where M{sub 3} is topologically an S{sup 3}. In particular, in this paper we present a 10d flow solution which may be interpreted as a non-BPS bound state of NS5, D6 and (D6)-bar branes. Moreover, by adopting its 7d effective description, we are able to holographically compute the free energy and the operator spectrum in the novel IR conformal fixed point.

From asymptotic safety to dark energy

International Nuclear Information System (INIS)

Ahn, Changrim; Kim, Chanju; Linder, Eric V.

2011-01-01

We consider renormalization group flow applied to the cosmological dynamical equations. A consistency condition arising from energy-momentum conservation links the flow parameters to the cosmological evolution, restricting possible behaviors. Three classes of cosmological fixed points for dark energy plus a barotropic fluid are found: a dark energy dominated universe, which can be either accelerating or decelerating depending on the RG flow parameters, a barotropic dominated universe where dark energy fades away, and solutions where the gravitational and potential couplings cease to flow. If the IR fixed point coincides with the asymptotically safe UV fixed point then the dark energy pressure vanishes in the first class, while (only) in the de Sitter limit of the third class the RG cutoff scale becomes the Hubble scale.

An evaluation of energy-environment-economic efficiency for EU, APEC and ASEAN countries: Design of a Target-Oriented DFM model with fixed factors in Data Envelopment Analysis

International Nuclear Information System (INIS)

Suzuki, Soushi; Nijkamp, Peter

2016-01-01

This paper aims to offer an advanced assessment methodology for sustainable national energy-environment-economic efficiency strategies, based on an extended Data Envelopment Analysis (DEA). The use of novel efficiency-improving approaches based on DEA originates from the so-called Distance Friction Minimisation (DFM) method. To design a feasible improvement strategy for low-efficiency DMUs, we develop here a Target-Oriented (TO) DFM model. However, in many real-world cases input factors may not be flexibly adjusted in the short run. In this study, we integrate the TO-DFM model with a fixed (inflexible) factor (FF) approach to cope with such more realistic circumstances. Super-efficiency DEA is next used in our comparative study on the efficiency assessment of energy-environment-economic targets for the EU, APEC and ASEAN (A&A) countries, employing appropriate data sets from the years 2003 to 2012. We consider two inputs (primary energy consumption and population) and two outputs (CO 2 and GDP), including a fixed input factor (viz. population). On the basis of our DEA analysis results, EU countries appear to exhibit generally a higher efficiency than A&A countries. The above-mentioned TO-DFM-FF projection model is able to address realistic circumstances and requirements in an operational sustainability strategy for efficiency improvement in inefficient countries in the A&A region. - Highlights: • We examine energy-environment-economic efficiency in European and A&A countries. • We present an operational efficiency improvement strategy using DEA. • European countries tend to have higher energy efficiency than A&A countries. • The study provides efficiency-enhancing strategic paths for inefficient countries.

Introduction to charm decay analysis in fixed target experiments

Energy Technology Data Exchange (ETDEWEB)

Bediaga, Ignacio; Goebel, Carla

1996-01-01

We present an introduction to data analysis in Experimental High Energy Physics, and some concepts and useful tools are discussed. To illustrate, we use the data of E-791, a fixed target experiment recently realized at Fermilab. In particular, we analyse decay modes of D{sup +} meson with three charged particles in the final state. (author). 8 refs., 22 figs., 1 tab.

Introduction to charm decay analysis in fixed target experiments

International Nuclear Information System (INIS)

Bediaga, Ignacio; Goebel, Carla.

1996-01-01

We present an introduction to data analysis in Experimental High Energy Physics, and some concepts and useful tools are discussed. To illustrate, we use the data of E-791, a fixed target experiment recently realized at Fermilab. In particular, we analyse decay modes of D + meson with three charged particles in the final state. (author). 8 refs., 22 figs., 1 tab

Effect of manual tilt adjustments on incident irradiance on fixed and tracking solar panels

International Nuclear Information System (INIS)

Lubitz, William David

2011-01-01

Hourly typical meteorological year (TMY3) data was utilized with the Perez radiation model to simulate solar radiation on fixed, azimuth tracking and two axis tracking surfaces at 217 geographically diverse temperate latitude sites across the contiguous United States of America. The optimum tilt angle for maximizing annual irradiation on a fixed south-facing panel varied from being equal to the latitude at low-latitude, high clearness sites, to up to 14 o less than the latitude at a north-western coastal site with very low clearness index. Across the United States, the optimum tilt angle for an azimuth tracking panel was found to be on average 19 o closer to vertical than the optimum tilt angle for a fixed, south-facing panel at the same site. Azimuth tracking increased annual solar irradiation incident on a surface by an average of 29% relative to a fixed south-facing surface at optimum tilt angle. Two axis tracking resulted in an average irradiation increase of 34% relative to the fixed surface. Introduction of manual surface tilt changes during the year produced a greater impact for non-tracking surfaces than it did for azimuth tracking surfaces. Even monthly tilt changes only resulted in an average annual irradiation increase of 5% for fixed panels and 1% for azimuth tracked surfaces, relative to using a single optimized tilt angle in each case. In practice, the decision whether to manually tilt panels requires balancing the added cost in labor and the panel support versus the extra energy generation and the cost value of that energy. A spreadsheet file is available that gives individual results for each of the 217 simulated sites.

On the configuration of an active target for a fixed-target B experiment at SSC energies

International Nuclear Information System (INIS)

Dukes, E.C.

1993-01-01

The optimal configuration of target and silicon microvertex detector for fixed-target B experiments has yet to be determined. For fixed-target charm experiments the usual setup consists of a series of inert target foils - typically a few millimeters thick and separated by a few centimeters - immediately followed by a silicon microvertex detector. Because of the larger boost at the SSC, the efficacy of using active target foils - tightly packed silicon microstrip detectors - has been considered by at least one group: the SFT collaboration. It is hoped that with an active target the tracks of charged B's themselves can be measured, improving charged B reconstruction efficiencies. The author examines two issues concerning silicon active targets for fixed-target experiments at the SSC: (1) the effect on the acceptance of the requirement that the B decay vertices occur outside of the target foils, and (2) the ability of an active target to directly track charged B's

Fast neutron dosimetry for radioprotection near large accelerators. Application to the proton synchrotron Saturne; Dosimetrie des neutrons rapides en vue de la radioprotection aupres des grands accelerateurs. Application au synchrotron a protons Saturne

Energy Technology Data Exchange (ETDEWEB)

Tardy-Joubert, P

1963-07-01

Methods are described that are used for the measurement of a neutron flux, and of the corresponding energy flux and dose absorbed. The methods are checked experimentally by the use of neutron sources of known energy distribution. The conditions of use of a proportional counter for recoil protons are described. The experimental results obtained with the synchrotron SATURNE at Saclay are described. (author) [French] L'auteur presente les methodes utilisables pour la mesure d'un flux de neutrons, du flux d'energie et de la dose absorbee correspondants. Les methodes sont verifiees experimentalement au moyen de sources de neutrons de spectre connu. Les conditions d'emploi d'un compteur proportionnel a protons de recul sont definies. Les resultats experimentaux obtenus aupres du synchrotron Saturne de Saclay sont presentes. (auteur)

Limitations to very high rate wire chambers in fixed target geometries

International Nuclear Information System (INIS)

Spiegel, L.

1989-11-01

The task is to explore physical limitations to the operation of wire chambers in fixed target geometries at an interaction rate of 52 MHz (chosen as it corresponds to the FNAL accelerator rf rate.) That is, to see if there are physical limitations to the operation of gaseous wire chambers at such a high operating rate. A primary proton beam energy of 800 GeV has been assumed although modest increases in the primary energy should not affect the basic conclusion as secondary multiplicity increases logarithmically with center-of-momentum energy. By sustaining a 52 MHz interaction rate it is meant that results from a given interaction are electronically isolated from preceding and subsequent rf buckets, good wire plane efficiency is maintained throughout the active region of the chamber, and the chamber operates in a stable manner throughout the course of a typical fixed target run -- six months to a full year. Other working assumptions include the understanding that chamber electronics -- amplifiers, discriminators, delay elements, encoders -- will not suffer degradation at 52 MHz and that the intensely populated beam regions have been somehow excluded from the chambers. 7 refs., 2 figs

Numerical modeling of straw combustion in a fixed bed

DEFF Research Database (Denmark)

Zhou, Haosheng; Jensen, Anker; Glarborg, Peter

2005-01-01

. The straw combustion processes include moisture evaporation, straw pyrolysis, gas combustion, and char combustion. The model provides detailed information of the structure of the ignition flame front. Simulated gas species concentrations at the bed surface, ignition flame front rate, and bed temperature......Straw is being used as main renewable energy source in grate boilers in Denmark. For optimizing operating conditions and design parameters, a one-dimensional unsteady heterogeneous mathematical model has been developed and experiments have been carried out for straw combustion in a fixed bed...... are in good agreement with measurements at different operating conditions such as primary air-flow rate, pre-heating of the primary air, oxygen concentration, moisture content in straw, and bulk density of the straw in the fixed bed. A parametric study indicates that the effective heat conductivity, straw...

Analysis of fixed tilt and sun tracking photovoltaic–micro wind based hybrid power systems

International Nuclear Information System (INIS)

Sinha, Sunanda; Chandel, S.S.

2016-01-01

Graphical abstract: 6 kW_p photovoltaic–micro wind based hybrid power system analysis in a Indian Western Himalayan location. - Highlights: • Power generation by a roof mounted photovoltaic–micro wind hybrid system is explored. • Optimum hybrid configurations using fixed and sun tracking photovoltaic systems are determined. • Analysis of hybrid systems with optimally tilted and different sun tracking systems is presented. • Two axis sun tracking systems are found to generate 4.88–26.29% more energy than fixed tilt system. • Hybrid system installed at optimum tilt angle is found to be cost effective than a sun tracking system. - Abstract: In this study fixed tilt and sun tracking photovoltaic based micro wind hybrid power systems are analyzed along with determining the optimum configurations for a 6 kW_p roof mounted micro wind based hybrid system using fixed and tracking photovoltaic systems to enhance the power generation potential in a low windy Indian hilly terrain with good solar resource. The main objective of the study is to enhance power generation by focusing on photovoltaic component of the hybrid system. A comparative power generation analysis of different configurations of hybrid systems with fixed tilt, monthly optimum tilt, yearly optimum tilt and 6 different sun tracking photovoltaic systems is carried out using Hybrid Optimization Model for Electric Renewables. Monthly and seasonal optimum tilt angles determined for the location vary between 0° and 60° with annual optimum tilt angle as 29.25°. The optimum configurations for all sun tracking systems except for the two axis tracking system is found to be 7 kW_p photovoltaic system, one 5 kW_p wind turbine, 10 batteries and a 2 kW_p inverter. The optimum configuration for two axis tracking system and two types of fixed tilt systems, is found to be a 8 kW_p photovoltaic system, one 5 kW_p wind turbine, 10 batteries and a 2 kW_p inverter. The results show that horizontal axis with

Energy efficient and fast reversal of a fixed skyrmion two-terminal memory with spin current assisted by voltage controlled magnetic anisotropy

Science.gov (United States)

Bhattacharya, Dhritiman; Mamun Al-Rashid, Md; Atulasimha, Jayasimha

2017-10-01

Recent work (P-H Jang et al 2015 Appl. Phys. Lett. 107 202401, J. Sampaio et al 2016 Appl. Phys. Lett. 108 112403) suggests that ferromagnetic reversal with spin transfer torque (STT) requires more current in a system in the presence of Dzyaloshinskii-Moriya interaction (DMI) than switching a typical ferromagnet of the same dimensions and perpendicular magnetic anisotropy (PMA). However, DMI promotes the stabilization of skyrmions and we report that when perpendicular anisotropy is modulated (reduced) for both the skyrmion and ferromagnet, it takes a much smaller current to reverse the fixed skyrmion than to reverse the ferromagnet in the same amount of time, or the skyrmion reverses much faster than the ferromagnet at similar levels of current. We show with rigorous micromagnetic simulations that skyrmion switching proceeds along a different path at very low PMA, which results in a significant reduction in the spin current or time required for reversal. This can offer potential for memory applications where a relatively simple modification of the standard STT-RAM (to include a heavy metal adjacent to the soft magnetic layer and with appropriate design of the tunnel barrier) can lead to an energy efficient and fast magnetic memory device based on the reversal of fixed skyrmions.

The too expensive invoice of the wind energy. The electric power regulation commission criticizes the State tariff; La facture trop lourde des eoliennes. La commission de regulation de l'electricite critique le tarif fixe par l'Etat

Energy Technology Data Exchange (ETDEWEB)

Nathan, E.; Delbecq, D.; Coroller, C.; Cori, N.; Bernard, C.

2001-07-01

After the order of the 12 june, fixing the purchase tariffs of the wind energy, the CRE (electric power regulation commission) contested this tariff: this wind energy development policy is too expensive for the collectivity. (A.L.B.)

Conceptual design of a fixed-pitch wind turbine generator system rated at 400 kilowatts

Science.gov (United States)

Pintz, A.; Kasuba, R.; Spring, J.

1984-01-01

The design and cost aspects of a fixed pitch, 400 kW Wind Turbine Generator (WTG) concept are presented. Improvements in reliability and cost reductions were achieved with fixed pitch operation and by incorporating recent advances in WTG technology. The specifications for this WTG concept were as follows: (1) A fixed pitch, continuous wooden rotor was to be provided by the Gougeon Bros. Co. (2) An 8 leg hyperboloid tower that showed promise as a low cost structure was to be used. (3) Only commercially available components and parts that could be easily fabricated were to be considered. (4) Design features deemed desirable based on recent NASA research efforts were to be incorporated. Detailed costs and weight estimates were prepared for the second machine and a wind farm of 12 WTG's. The calculated cost of energy for the fixed pitch, twelve unit windfarm is 11.5 cents/kW hr not including the cost of land and access roads. The study shows feasibility of fixed pitch, intermediate power WTG operation.

Characterizing subcritical assemblies with time of flight fixed by energy estimation distributions

Science.gov (United States)

Monterial, Mateusz; Marleau, Peter; Pozzi, Sara

2018-04-01

We present the Time of Flight Fixed by Energy Estimation (TOFFEE) as a measure of the fission chain dynamics in subcritical assemblies. TOFFEE is the time between correlated gamma rays and neutrons, subtracted by the estimated travel time of the incident neutron from its proton recoil. The measured subcritical assembly was the BeRP ball, a 4.482 kg sphere of α-phase weapons grade plutonium metal, which came in five configurations: bare, 0.5, 1, and 1.5 in iron, and 1 in nickel closed fitting shell reflectors. We extend the measurement with MCNPX-PoliMi simulations of shells ranging up to 6 inches in thickness, and two new reflector materials: aluminum and tungsten. We also simulated the BeRP ball with different masses ranging from 1 to 8 kg. A two-region and single-region point kinetics models were used to model the behavior of the positive side of the TOFFEE distribution from 0 to 100 ns. The single region model of the bare cases gave positive linear correlations between estimated and expected neutron decay constants and leakage multiplications. The two-region model provided a way to estimate neutron multiplication for the reflected cases, which correlated positively with expected multiplication, but the nature of the correlation (sub or superlinear) changed between material types. Finally, we found that the areal density of the reflector shells had a linear correlation with the integral of the two-region model fit. Therefore, we expect that with knowledge of reflector composition, one could determine the shell thickness, or vice versa. Furthermore, up to a certain amount and thickness of the reflector, the two-region model provides a way of distinguishing bare and reflected plutonium assemblies.

Practical guide to dosimetry as applied in the research reactors of the Saclay and Grenoble nuclear research centers; Guide pratique de la dosimetrie mise en oeuvre dans les reacteurs de recherche du C.E.N./G et du C.E.N./S

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-07-01

Since the problems concerning neutron and gamma flux measurements which arise during irradiation experiments in the reactors in the Grenoble and Saclay Centres are of the same type, and since the solutions found are very often adopted in common, we have attempted to describe the methods we use at the present time. A brief description is given of the production of the detectors, the electronic apparatus; the formulae usually used for the interpretation of the measurements are given. A series of technical data cards give the most commonly used detector characteristics. These cards give the physical characteristics of the detectors, their nuclear constants, if any, the most suitable counting methods and the field of application. (authors) [French] Les problemes de mesures de flux de neutrons et de flux gamma qui se posent pour les experiences irradiees dans les reacteurs des Centres de Grenoble et de Saclay etant du meme type et les solutions trouvees, tres souvent adoptees en commun, nous avons cherche a decrire les methodes que nous pratiquons actuellement. On decrit tres brievement la fabrication des detecteurs, l'appareillage electronique; on rappelle les formules usuelles qui servent dans l'interpretation des mesures. Une serie de fiches techniques rassemble les caracteristiques des detecteurs les plus couramment utilises. Ces fiches indiquent les caracteristiques physiques des detecteurs, leurs constantes nucleaires s'il y a lieu, les methodes de comptage les mieux adaptees et le domaine d'utilisation. (auteurs)

Fixed-film processes. Part 1

International Nuclear Information System (INIS)

Canziani, R.

1999-01-01

Recently, full scale fixed-film or mixed suspended and fixed biomass bioreactors have been applied in many wastewater treatments plants. These process no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients and suspended solid. Also, processes may work at high rates making it possible to build small footprint installations. Fixed-film process include trickling filter, moving bed reactors fluidized bed reactors. In the first part, the theoretical base governing fixed-film processes are briefly outlined with some simple examples of calculations underlining the main differences with conventional activated sludge processes [it

Analyzing powers of inelastic dp-scattering in the energy region of delta and roper resonances excitation

International Nuclear Information System (INIS)

Malinina, L.V.; Alkhazov, G.D.; Augustyniak, W.

2001-01-01

A study of inelastic scattering of polarized 3.73 GeV/c deuterons on protons in the energy region of the Roper N* (1440) and the Δ(1232) resonances excitation has been performed in an exclusive experiment at LNS (Laboratoire National SATURNE, Saclay, France) using the SPES4-π setup. Tensor and vector analyzing powers of pion production for the reactions d+p→d+n+π + , d+p→d+p+π 0 , d+p→d+N+ππ have been measured as functions of the squared deuteron 4-momentum transfer t, of the effective mass of the subsystems (Nπ), (Nππ) and of the pion emission angle. A strong dependence of these analyzing powers upon the pion emission angle is observed. It is found that A yy values for the considered reaction channels are systematically larger than the known inclusive p(d,d')X world data at the nearest beam energy

Physical stress, mass, and energy for non-relativistic matter

Science.gov (United States)

Geracie, Michael; Prabhu, Kartik; Roberts, Matthew M.

2017-06-01

For theories of relativistic matter fields there exist two possible definitions of the stress-energy tensor, one defined by a variation of the action with the coframes at fixed connection, and the other at fixed torsion. These two stress-energy tensors do not necessarily coincide and it is the latter that corresponds to the Cauchy stress measured in the lab. In this note we discuss the corresponding issue for non-relativistic matter theories. We point out that while the physical non-relativistic stress, momentum, and mass currents are defined by a variation of the action at fixed torsion, the energy current does not admit such a description and is naturally defined at fixed connection. Any attempt to define an energy current at fixed torsion results in an ambiguity which cannot be resolved from the background spacetime data or conservation laws. We also provide computations of these quantities for some simple non-relativistic actions.

Recovery of Utility Fixed Costs: Utility, Consumer, Environmental and Economist Perspectives

Energy Technology Data Exchange (ETDEWEB)

Wood, Lisa [Inst. for Electric Innovation and The Edison Foundation, Washington DC (United States); Hemphill, Ross [RCHemphill Solutions, Columbus, OH (United States); Howat, John [National Consumer Law Center, Boston, MA (United States); Cavanagh, Ralph [Natural Resources Defense Council, New York, NY (United States); Borenstein, Severin [Univ. of California, Berkeley, CA (United States); Deason, Jeff [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-06-14

Utilities recover costs for providing electric service to retail customers through a combination of rate components that together comprise customers’ monthly electric bills. Rates and rate designs are set by state regulators and vary by jurisdiction, utility and customer class. In addition to the fundamental tenet of setting fair and reasonable rates, rate design balances economic efficiency, equity and fairness, customer satisfaction, utility revenue stability, and customer price and bill stability.1 At the most basic level, retail electricity bills in the United States typically include a fixed monthly customer charge — a set dollar amount regardless of energy usage — and a volumetric energy charge for each kilowatt-hour consumed.2 The energy charge may be flat across all hours, vary by usage level (for example, higher rates at higher levels of usage), or vary based on time of consumption.3 While some utility costs, such as fuel costs, clearly vary according to electricity usage, other costs are “fixed” over the short run — generally, those that do not vary over the course of a year. Depending on your point of view, and whether the state’s electricity industry has been restructured or remains vertically integrated, the set of costs that are “fixed” may be quite limited. Or the set may extend to all capacity costs for generation, transmission and distribution. In the long run, all costs are variable. In the context of flat or declining loads in some regions, utilities are proposing a variety of changes to retail rate designs, particularly for residential customers, to recover fixed costs. In this report, authors representing utility (Chapter 1), consumer (Chapter 2), environmentalist (Chapter 3) and economist (Chapter 4) perspectives discuss fixed costs for electric utilities and set out their principles for recovering those costs. The table on the next page summarizes each author’s relative preferences for various options for fixed cost

Contribution to the study of light nuclei with polarized deuterons; Contribution a l'etude des noyaux legers au moyen de deutons polarises

Energy Technology Data Exchange (ETDEWEB)

Arvieux, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-04-15

We describe roughly the vector and tensor-polarized deuteron source associated with the Saclay fixed energy (22 MeV) cyclotron. This has been used to measure the deuteron asymmetry in d-{alpha} scattering (between 17.7 and 21.4 MeV) and in d-p scattering at 21.7 MeV. Then we develop the formalism of irreducible tensor operators used to describe the polarization of a particle of given spin and we study the helicity formalism used to describe the scattering amplitudes for scattering of deuterons by {alpha} (spin 0) and protons (spin 1/2). We apply the preceding results to the phase shift analysis of scattering cross-sections and: 1) deuteron polarization in d-{alpha} scattering from 10 to 27 MeV from which we obtain indications about the excited states of {sup 6}Li; 2) proton and deuteron polarizations in p-d (or d-p) scattering from 1.5 to 12 MeV so as to get the splitting (due to spin interactions) of P and D waves. (author) [French] On decrit sommairement la source de deutons polarises vectoriellement et tensoriellement associee au cyclotron a energie fixe de Saclay avec laquelle on a mesure l'asymetrie des deutons dans la diffusion d-{alpha} de 17,7 a 21,4 MeV et d-p a 21,7 MeV. Puis or developpe le formalisme des operateurs tensoriels irreductibles utilise pour decrire la polarisation d'une particule de spin quelconque. On etudie ensuite le formalisme de l'helicite dans lequel on etudie la diffusion elastique des deutons diffuses par des particules {alpha} (spin 0) et des protons (spin 1/2). On applique les resultats precedents a l'analyse en dephasages de la section efficace et des polarisations: 1 )des deutons dont la diffusion d-{alpha} de 10 a 27 MeV destinee a donner des indications sur les niveaux excites de {sup 6}Li; 2) des protons et des deutons dans la diffusion p-d de 1,5 a 12 MeV en vue de l'etude de la separation suivant les differentes valeurs du moment total J, des ondes P et D (separation due aux interactions de spin). (auteur)

Fixed-Point Configurable Hardware Components

Directory of Open Access Journals (Sweden)

Rocher Romuald

2006-01-01

Full Text Available To reduce the gap between the VLSI technology capability and the designer productivity, design reuse based on IP (intellectual properties is commonly used. In terms of arithmetic accuracy, the generated architecture can generally only be configured through the input and output word lengths. In this paper, a new kind of method to optimize fixed-point arithmetic IP has been proposed. The architecture cost is minimized under accuracy constraints defined by the user. Our approach allows exploring the fixed-point search space and the algorithm-level search space to select the optimized structure and fixed-point specification. To significantly reduce the optimization and design times, analytical models are used for the fixed-point optimization process.

Fixed-time stability of dynamical systems and fixed-time synchronization of coupled discontinuous neural networks.

Science.gov (United States)

Hu, Cheng; Yu, Juan; Chen, Zhanheng; Jiang, Haijun; Huang, Tingwen

2017-05-01

In this paper, the fixed-time stability of dynamical systems and the fixed-time synchronization of coupled discontinuous neural networks are investigated under the framework of Filippov solution. Firstly, by means of reduction to absurdity, a theorem of fixed-time stability is established and a high-precision estimation of the settling-time is given. It is shown by theoretic proof that the estimation bound of the settling time given in this paper is less conservative and more accurate compared with the classical results. Besides, as an important application, the fixed-time synchronization of coupled neural networks with discontinuous activation functions is proposed. By designing a discontinuous control law and using the theory of differential inclusions, some new criteria are derived to ensure the fixed-time synchronization of the addressed coupled networks. Finally, two numerical examples are provided to show the effectiveness and validity of the theoretical results. Copyright © 2017 Elsevier Ltd. All rights reserved.

Small Angle Neutron Scattering (sans) Studies on "SIDE-END FIXED" and "SIDE-ON FIXED" Liquid Crystal Polymers

Science.gov (United States)

Hardouin, F.; Noirez, L.; Keller, P.; Leroux, N.; Cotton, J. P.

The following sections are included: * Introduction * Experimental * Results and discussion * Determination of the backbone conformation in the nematic and smectic A phases of "side-end fixed" L.C. polymethacrylates (PMA) or polyacrylates (PA) * Determination of the global and backbone conformation in the nematic and smectic A phases of "side-end fixed" L.C. polysiloxanes (PMS) * Determination of the backbone conformation in the unique nematic phase (without smectic A phase) or in the reentrant nematic phase (below smectic A phase) of "side-end fixed" L.C. polyacrylates (PA) * Determination of the global conformation in the nematic phase of "side-on fixed" L.C. polysiloxanes (PMS) * Determination of the global conformation in the nematic phase of "diluted side-on fixed" L.C. copolysiloxanes * Determination of the backbone conformation in the nematic phase of "side-on fixed" L.C. polyacrylates * Conclusions * References

On RNA-RNA interaction structures of fixed topological genus.

Science.gov (United States)

Fu, Benjamin M M; Han, Hillary S W; Reidys, Christian M

2015-04-01

Interacting RNA complexes are studied via bicellular maps using a filtration via their topological genus. Our main result is a new bijection for RNA-RNA interaction structures and a linear time uniform sampling algorithm for RNA complexes of fixed topological genus. The bijection allows to either reduce the topological genus of a bicellular map directly, or to lose connectivity by decomposing the complex into a pair of single stranded RNA structures. Our main result is proved bijectively. It provides an explicit algorithm of how to rewire the corresponding complexes and an unambiguous decomposition grammar. Using the concept of genus induction, we construct bicellular maps of fixed topological genus g uniformly in linear time. We present various statistics on these topological RNA complexes and compare our findings with biological complexes. Furthermore we show how to construct loop-energy based complexes using our decomposition grammar. Copyright © 2015 Elsevier Inc. All rights reserved.

The wood energy in France

International Nuclear Information System (INIS)

Douard, F.; Oremus, Y.; Garsault-Fabbi, A.

2007-01-01

The program law fixing the energy policy (POPE Law of the 13 july 2005) fixes an objective of 50% of growth for the renewable heat. As this renewable heat is today generated by the biomass, it seems necessary to adjust all the efforts on this sector. This document proposes to takes stock on the wood energy in France. It presents the wood fuels, an evaluation of the Wood-Energy Plan decided by the ADEME in 2000, the wood heat networks, and some example of installations. (A.L.B.)

Measurement of SEU thresholds and cross sections at fixed incidence angles

International Nuclear Information System (INIS)

Criswell, T.L.; Oberg, D.L.; Wert, J.L.; Measel, P.R.; Wilson, W.E.

1987-01-01

Current SEU testing and analysis techniques have as basic assumptions that the charge deposited at a junction depends linearly on the linear energy transfer (LET) of the ion and the pathlength of the ion through an imagined parallelepiped that represents the depletion region. This study tests these assumptions for two bipolar parts, AMD 27LS00 and Fairchild 93L422, by irradiating at fixed angles while varying the LET of two ion species. It was found that the 27LS00 shows a pronounced ion species dependence, and may show a deviation of deposited charge from the usual inverse-cosine times a fixed depletion depth, while the 93L422 exhibited the expected inverse-cosine dependence and no ion species dependence

CMS delegation for MTB55 held at Tata Institute in Mumbai (Bombay) during CMS week 14 December 2000.

CERN Multimedia

A. Payn

2000-01-01

CMS delegation at MTB55 in Tata Institue Mumbai on 14 December 2000. From left to right Bertrand Blau/ETHZ, Stefania Farinon/INFN-Genova, Alain Hervé/CERN, Lucien Veillet/CERN, Jean-Paul Grillet/CERN, Yves Pabot/Saclay, Bruno Levesy/Saclay, Alain Payn/Saclay, François Kircher/Saclay, Benoît Curé/CERN.

Statistical analysis of the electric energy production from photovoltaic conversion using mobile and fixed constructions

Science.gov (United States)

Bugała, Artur; Bednarek, Karol; Kasprzyk, Leszek; Tomczewski, Andrzej

2017-10-01

The paper presents the most representative - from the three-year measurement time period - characteristics of daily and monthly electricity production from a photovoltaic conversion using modules installed in a fixed and 2-axis tracking construction. Results are presented for selected summer, autumn, spring and winter days. Analyzed measuring stand is located on the roof of the Faculty of Electrical Engineering Poznan University of Technology building. The basic parameters of the statistical analysis like mean value, standard deviation, skewness, kurtosis, median, range, or coefficient of variation were used. It was found that the asymmetry factor can be useful in the analysis of the daily electricity production from a photovoltaic conversion. In order to determine the repeatability of monthly electricity production, occurring between the summer, and summer and winter months, a non-parametric Mann-Whitney U test was used as a statistical solution. In order to analyze the repeatability of daily peak hours, describing the largest value of the hourly electricity production, a non-parametric Kruskal-Wallis test was applied as an extension of the Mann-Whitney U test. Based on the analysis of the electric energy distribution from a prepared monitoring system it was found that traditional forecasting methods of the electricity production from a photovoltaic conversion, like multiple regression models, should not be the preferred methods of the analysis.

Fixed-film processes. Part 2

International Nuclear Information System (INIS)

Canziani, R.

1999-01-01

Recently, full scale fixed-film or mixed suspended have been applied in many wastewater treatments plants. These processes no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients suspended solids. Also, processes may work at high rates making is possible to build small footprint installations. Fixed-film processes include trickling filters (and combined suspended and fixed-films processes), rotating biological contactors, biological aerated submerged, filters moving bed reactors, fluidized bed reactors. In the first part, the theoretical based governing fixed-film processes are briefly outlined, with some simple examples of calculations, underlining the main differences with conventional activate sludge processes. In the second part, the most common types of reactors are reviewed [it

Technical Note: A treatment plan comparison between dynamic collimation and a fixed aperture during spot scanning proton therapy for brain treatment

Energy Technology Data Exchange (ETDEWEB)

Smith, Blake, E-mail: bsmith34@wisc.edu; Gelover, Edgar; Moignier, Alexandra; Wang, Dongxu; Flynn, Ryan T.; Hyer, Daniel E. [Department of Radiation Oncology, University of Iowa, 200 Hawkins Drive, Iowa City, Iowa 52242 (United States); Lin, Liyong; Kirk, Maura; Solberg, Tim [Department of Radiation Oncology, University of Pennsylvania, TRC 2 West, 3400 Civic Center Boulevard, Philadelphia, Pennsylvania 19104 (United States)

2016-08-15

Purpose: To quantitatively assess the advantages of energy-layer specific dynamic collimation system (DCS) versus a per-field fixed aperture for spot scanning proton therapy (SSPT). Methods: Five brain cancer patients previously planned and treated with SSPT were replanned using an in-house treatment planning system capable of modeling collimated and uncollimated proton beamlets. The uncollimated plans, which served as a baseline for comparison, reproduced the target coverage and organ-at-risk sparing of the clinically delivered plans. The collimator opening for the fixed aperture-based plans was determined from the combined cross sections of the target in the beam’s eye view over all energy layers which included an additional margin equivalent to the maximum beamlet displacement for the respective energy of that energy layer. The DCS-based plans were created by selecting appropriate collimator positions for each row of beam spots during a Raster-style scanning pattern which were optimized to maximize the dose contributions to the target and limited the dose delivered to adjacent normal tissue. Results: The reduction of mean dose to normal tissue adjacent to the target, as defined by a 10 mm ring surrounding the target, averaged 13.65% (range: 11.8%–16.9%) and 5.18% (2.9%–7.1%) for the DCS and fixed aperture plans, respectively. The conformity index, as defined by the ratio of the volume of the 50% isodose line to the target volume, yielded an average improvement of 21.35% (19.4%–22.6%) and 8.38% (4.7%–12.0%) for the DCS and fixed aperture plans, respectively. Conclusions: The ability of the DCS to provide collimation to each energy layer yielded better conformity in comparison to fixed aperture plans.

Technical Note: A treatment plan comparison between dynamic collimation and a fixed aperture during spot scanning proton therapy for brain treatment

International Nuclear Information System (INIS)

Smith, Blake; Gelover, Edgar; Moignier, Alexandra; Wang, Dongxu; Flynn, Ryan T.; Hyer, Daniel E.; Lin, Liyong; Kirk, Maura; Solberg, Tim

2016-01-01

Purpose: To quantitatively assess the advantages of energy-layer specific dynamic collimation system (DCS) versus a per-field fixed aperture for spot scanning proton therapy (SSPT). Methods: Five brain cancer patients previously planned and treated with SSPT were replanned using an in-house treatment planning system capable of modeling collimated and uncollimated proton beamlets. The uncollimated plans, which served as a baseline for comparison, reproduced the target coverage and organ-at-risk sparing of the clinically delivered plans. The collimator opening for the fixed aperture-based plans was determined from the combined cross sections of the target in the beam’s eye view over all energy layers which included an additional margin equivalent to the maximum beamlet displacement for the respective energy of that energy layer. The DCS-based plans were created by selecting appropriate collimator positions for each row of beam spots during a Raster-style scanning pattern which were optimized to maximize the dose contributions to the target and limited the dose delivered to adjacent normal tissue. Results: The reduction of mean dose to normal tissue adjacent to the target, as defined by a 10 mm ring surrounding the target, averaged 13.65% (range: 11.8%–16.9%) and 5.18% (2.9%–7.1%) for the DCS and fixed aperture plans, respectively. The conformity index, as defined by the ratio of the volume of the 50% isodose line to the target volume, yielded an average improvement of 21.35% (19.4%–22.6%) and 8.38% (4.7%–12.0%) for the DCS and fixed aperture plans, respectively. Conclusions: The ability of the DCS to provide collimation to each energy layer yielded better conformity in comparison to fixed aperture plans.

Technical Note: A treatment plan comparison between dynamic collimation and a fixed aperture during spot scanning proton therapy for brain treatment

Science.gov (United States)

Smith, Blake; Gelover, Edgar; Moignier, Alexandra; Wang, Dongxu; Flynn, Ryan T.; Lin, Liyong; Kirk, Maura; Solberg, Tim; Hyer, Daniel E.

2016-01-01

Purpose: To quantitatively assess the advantages of energy-layer specific dynamic collimation system (DCS) versus a per-field fixed aperture for spot scanning proton therapy (SSPT). Methods: Five brain cancer patients previously planned and treated with SSPT were replanned using an in-house treatment planning system capable of modeling collimated and uncollimated proton beamlets. The uncollimated plans, which served as a baseline for comparison, reproduced the target coverage and organ-at-risk sparing of the clinically delivered plans. The collimator opening for the fixed aperture-based plans was determined from the combined cross sections of the target in the beam’s eye view over all energy layers which included an additional margin equivalent to the maximum beamlet displacement for the respective energy of that energy layer. The DCS-based plans were created by selecting appropriate collimator positions for each row of beam spots during a Raster-style scanning pattern which were optimized to maximize the dose contributions to the target and limited the dose delivered to adjacent normal tissue. Results: The reduction of mean dose to normal tissue adjacent to the target, as defined by a 10 mm ring surrounding the target, averaged 13.65% (range: 11.8%–16.9%) and 5.18% (2.9%–7.1%) for the DCS and fixed aperture plans, respectively. The conformity index, as defined by the ratio of the volume of the 50% isodose line to the target volume, yielded an average improvement of 21.35% (19.4%–22.6%) and 8.38% (4.7%–12.0%) for the DCS and fixed aperture plans, respectively. Conclusions: The ability of the DCS to provide collimation to each energy layer yielded better conformity in comparison to fixed aperture plans. PMID:27487886

Fix 40!

Index Scriptorium Estoniae

2008-01-01

Ansambel Fix peab 13. detsembril Tallinnas Saku Suurhallis oma 40. sünnipäeva. Kontserdi erikülaline on ansambel Apelsin, kaastegevad Jassi Zahharov ja HaleBopp Singers. Õhtut juhib Tarmo Leinatamm

Bill project introducing a progressive price fixing of energy - Nr 150

International Nuclear Information System (INIS)

Brottes, Francois; Le Roux, Bruno

2012-01-01

This bill project aims at speeding up energy transition by inciting households to reduce their consumption, and at accompanying the unavoidable increase of energy prices. It introduces a rather complex process to establish the energy tariff, and notably a bonus-malus principle. The objective is to incite households to better insulate their main housing. It also takes social tariffs into account, defines institutions and representative for energy regulation, proposes the implementation of a public service for housing energy performance, and addresses the issue of energy supply in winter to households in precarious situation

Passive cooling of a fixed bed nuclear reactor

International Nuclear Information System (INIS)

Petry, V.J.; Bortoli, A.L. de; Sefidwash, F.

2005-01-01

Small nuclear reactors without the need for on-site refuelling have greater simplicity, better compliance with passive safety systems, and are more adequate for countries with small electric grids and limited investment capabilities. Here the passive cooling characteristic of the fixed bed nuclear reactor (FBNR), that is being developed under the International Atomic Energy Agency (IAEA) Coordinated Research Project, is studied. A mathematical model is developed to calculate the temperature distribution in the fuel chamber of the reactor. The results demonstrate the passive cooling of this nuclear reactor concept. (authors)

Analyzing Powers of Inelastic dp-Scattering in the Energy Region of Delta and Roper Resonances Excitation

CERN Document Server

Malinina, L V; Augustyniak, W; Boivin, M; Boyard, J L; Dahl, R; Drews, M; Ellegaard, C; Fahri, L; Gaarde, C; Hennino, T; Jourdain, J C; Kagarlis, M A; Kravtsov, A V; Künne, R A; Larsen, J C; Morsch, P; Mylnikov, V A; Orichtchin, E M; Perdrisat, C F; Piskunov, N M; Prokofiev, A N; Punjabi, V; Radvanyi, P; Ramstein, B; Razmyslovich, B V; Roy-Stephan, M; Sitnik, I M; Skousen, M; Strokovsky, E A; Tkach, I I; Tomasi-Gustafsson, E; Volkov, S S; Zhdanov, A A; Zupranski, P

2001-01-01

A study of inelastic scattering of polarized 3.73 GeV/c deuterons on protons in the energy region of the Roper N*(1440) and the {DELTA}(1232) resonances excitation has been performed in an exclusive experiment at LNS (Laboratoire National SATURNE, Saclay, France) using the SPES-{pi} setup.Tensor and vector analyzing powers of pion production for the reactions d + p {\\to} d + n + pi^{+}, d + p {\\to} d + p + pi^{0}, d + p {\\to} d + N + pi pi have been measured as functions of the squared deuteron 4-momentum transfer t, of the effective mass of the subsystems (N pi), (N pi pi) and of the pion emission angle. A strong dependence of these analyzing powers upon the pion emission angle is observed. It is found that A_{yy} values for the considered reaction channels are systematically larger than the known inclusive {p (d, d {\\prime}) X} world data at the nearest beam energy.

High Transverse Momentum Direct Photon Production at Fermilab Fixed-Target Energies

International Nuclear Information System (INIS)

Apanasevich, Leonard

2005-01-01

This thesis describes a study of the production of high transverse momentum direct photons and π 0 mesons by proton beams at 530 and 800 GeV/c and π - beams at 515 GeV/c incident on beryllium, copper, and liquid hydrogen targets. The data were collected by Fermilab experiment E706 during the 1990 and 1991-92 fixed target runs. The apparatus included a large, finely segmented lead and liquid argon electromagnetic calorimeter and a charged particle spectrometer featuring silicon strip detectors in the target region and proportional wire chambers and drift tubes downstream of a large aperture analysis magnet. The inclusive cross sections are presented as functions of transverse momentum and rapidity. The measurements are compared with next-to-leading order perturbative QCD calculations and to results from previous experiments

A novel BEV concept based on fixed and swappable li-ion battery packs

DEFF Research Database (Denmark)

Barreras, Jorge Varela; Pinto, C.; de Castro, R.

2015-01-01

-based ownership models to distribute the cost of the large battery pack over the vehicle lifetime. A methodology is proposed for the analysis and evaluation of the proposed concept in comparison with a direct owned non swappable single pack BEV, proving that significant improvements on city fuel economy (up to 20......In this paper a novel battery electric vehicle (BEV) concept based on a small fixed and a big swappable li-ion battery pack is proposed in order to achieve: longer range, lower initial purchase price and lower energy consumption at short ranges. For short ranges the BEV is only powered...... by the relatively small fixed battery pack, without the large swappable battery pack. In this way the mass of the vehicle is reduced and therefore the energy consumed per unit distance is improved. For higher ranges the BEV is powered by both battery packs. This concept allows the introduction of subscription...

Cross Sections for the Production of Residual Nuclides by Proton-Induced Reactions with Uranium at Medium Energies

International Nuclear Information System (INIS)

Issa, S.A.M.; Michel, R.; Uosif, M.A.M.; Issa, S.A.M.; Flamentc, J.L.; David, J.C.; Leray, S.

2009-01-01

The production of residual nuclides by proton-induced reactions on uranium is investigated using activated targets from irradiation experiments at Saturne II synchrocyclotron at the Laboratory National Saturne/Saclay. These investigations contribute to the European research project NUDATRA within the IP EUROTRANS in which the feasibility of accelerator-driven transmutation of nuclear waste is evaluated. Experimental cross sections are derived from gamma-spectrometric measurements. A total of 1894 cross-section was deter-mined covering 44 residual nuclides in the energy range from 211 MeV to 2530 MeV. The experimental data together with those of earlier work of our group are discussed in the context of theoretical excitation functions calculated by the newly developed INCL4 + ABLA and the TALYS codes

Fixed points of quantum gravity

OpenAIRE

Litim, D F

2003-01-01

Euclidean quantum gravity is studied with renormalisation group methods. Analytical results for a non-trivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameter in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

Impact of fixed-mobile convergence

DEFF Research Database (Denmark)

Pachnicke, Stephan; Andrus, Bogdan-Mihai; Autenrieth, Achim

2016-01-01

Fixed-Mobile Convergence (FMC) is a very trendy concept as it promises integration of the previously separated fixed access network and the mobile network. From this novel approach telecommunication operators expect significant cost savings and performance improvements. FMC can be separated...

Characteristic Studies of Micron Zinc Particle Hydrolysis in a Fixed Bed Reactor

Directory of Open Access Journals (Sweden)

Lv Ming

2015-09-01

Full Text Available Zinc fuel is considered as a kind of promising energy sources for marine propeller. As one of the key steps for zinc marine energy power system, zinc hydrolysis process had been studied experimentally in a fixed bed reactor. In this study, we focus on the characteristics of micron zinc particle hydrolysis. The experimental results suggested that the steam inner diffusion is the controlling step of accumulative zinc particles hydrolysis reaction at a relative lower temperature and a relative higher water partial pressure. In other conditions, the chemical reaction kinetics was the controlling step. And two kinds of chemical reaction kinetics appeared in experiments: the surface reaction and the gas-gas reaction. The latter one occurs usually for larger zinc particles and high reaction temperature. Temperature seems to be one of the most important parameters for the dividing of different reaction mechanisms. Several parameters of the hydrolysis process including heating rate, water partial pressure, the particle size and temperature were also studied in this paper. Results show that the initial reaction temperature of zinc hydrolysis in fixed bed is about 410°C. And the initial reaction temperature increases as the heating rate increases and as the water partial pressure decreases. The total hydrogen yield increases as the heating rate decreases, as the water partial pressure increases, as the zinc particle size decreases, and as the reaction temperature increases. A hydrogen yield of more than 81.5% was obtained in the fixed bed experiments.

Infrared fixed point solution for the top quark mass and unification of couplings in the MSSM

International Nuclear Information System (INIS)

Bardeen, W.A.; Carena, M.; Pokorski, S.; Wagner, C.E.M.

1993-08-01

We analyze the implications of the infrared quasi fixed point solution for the top quark mass in the Minimal Supersymmetric Standard Model. This solution could explain in a natural way the relatively large value of the top quark mass and, if confirmed experimentally, may be suggestive of the onset of nonperturbative physics at very high energy scales. In the framework of grand unification, the expected bottom quark -- tau lepton Yukawa coupling unification is very sensitive to the fixed point structure of the top quark mass. For the presently allowed values of the electroweak parameters and the bottom quark mass, the Yukawa coupling unification implies that the top quark mass must be within ten percent of its fixed point values

THE PROBLEMS OF FIXED ASSETS CLASSIFICATION FOR ACCOUNTING

Directory of Open Access Journals (Sweden)

Sophiia Kafka

2016-06-01

Full Text Available This article provides a critical analysis of research in accounting of fixed assets; the basic issues of fixed assets accounting that have been developed by the Ukrainian scientists during 1999-2016 have been determined. It is established that the problems of non-current assets taxation and their classification are the most noteworthy. In the dissertations the issues of fixed assets classification are of exclusively particular branch nature, so its improvement is important. The purpose of the article is developing science-based classification of fixed assets for accounting purposes since their composition is quite diverse. The classification of fixed assets for accounting purposes have been summarized and developed in Figure 1 according to the results of the research. The accomplished analysis of existing approaches to classification of fixed assets has made it possible to specify its basic types and justify the classification criteria of fixed assets for the main objects of fixed assets. Key words: non-current assets, fixed assets, accounting, valuation, classification of the fixed assets. JEL:G M41  

Method for the combustion of a gas, in fixed bed, with an oxidized solid and associated installation

OpenAIRE

Abanades García, Juan Carlos; Fernández García, José Ramón

2014-01-01

[EN] The present invention pertains to the field of the generation of energy from combustible gases, incorporating the capture of carbon dioxide for use or permanent storage and, specifically relates to cyclical methods of gas combustion with oxidized solids (chemical looping processes), in fixed bed, for solving the problem of controlling temperature in the combustion of gaseous fuels in fixed beds of metal oxides operating at high pressures, and also the associated installation.

Knowledge management and attitude towards nuclear energy: The Russian dimension

International Nuclear Information System (INIS)

Gagarinski, A.

2007-01-01

The paper presented by the author at the first IAEA Knowledge Management Conference (2004, Saclay, France) was dedicated to the main achievements of the Soviet Union and Russia in generation and systematization of nuclear knowledge and in providing human resources for their application. Nevertheless, some well-known nuclear professionals consider the breach of the normal knowledge transfer process, which occurred when nuclear power plants have been transferred from the half-military nuclear complex with its high level of discipline to the civil 'boiler power industry' (quite unprepared for that), as one of the relevant causes of the Chernobyl accident. The crises of 1980-90ies (Chernobyl accident, changed political system, collapse of the USSR) have stopped the development of nuclear power industry and gave a severe blow to the nuclear knowledge management system. In present conditions, which can be surely described in the terms of 'nuclear renaissance', it seems important to trace, how the preserved and developing knowledge management system is influenced by the attitude towards nuclear energy in the country and in its 'components' (governmental authorities, energy community, public), as well as to follow up the role of nuclear professionals in forming the above attitude

The liner of the Saturne injector

International Nuclear Information System (INIS)

Prome, M.; Remeur, M.; Rommel, G.; Vienet, R.

1964-01-01

An increasing protons energy injection in the Saclay Protons Synchrotron is described. To realize this type of injection a special equipment is necessary. A description of these different elements of that special equipment is given. (authors) [fr

Chinese regional industrial energy efficiency evaluation based on a DEA model of fixing non-energy inputs

International Nuclear Information System (INIS)

Shi, G.-M.; Bi Jun; Wang Jinnan

2010-01-01

Data envelopment analysis (DEA) has recently become a popular method in measuring energy efficiency at the macro-economy level. However, previous studies are limited in that they failed to consider the issues of undesirable outputs and minimisation of energy consumption. Thus, this study considers both factors in measuring Chinese industrial energy efficiency and investigates the maximum energy-saving potential in 28 administrative regions in China. The results show that industries in the east area have the best average energy efficiency for the period 2000-2006, followed by the central area. Further, after comparing the industrial energy overall efficiency, pure technical efficiency (IEPTE), and scale efficiency of the 28 administrative regions examined, the study finds that in most regions of this study, the two main reasons causing the wastage of a large amount of energy during the industrial production process are that the industrial structure of most regions still relies on the massive use of energy in order to support the industrial-based economy and the IEPTE is too low. Based on these findings, this paper correspondingly proposes some policies to improve regional industrial energy efficiency.

Flat Coalgebraic Fixed Point Logics

Science.gov (United States)

Schröder, Lutz; Venema, Yde

Fixed point logics are widely used in computer science, in particular in artificial intelligence and concurrency. The most expressive logics of this type are the μ-calculus and its relatives. However, popular fixed point logics tend to trade expressivity for simplicity and readability, and in fact often live within the single variable fragment of the μ-calculus. The family of such flat fixed point logics includes, e.g., CTL, the *-nesting-free fragment of PDL, and the logic of common knowledge. Here, we extend this notion to the generic semantic framework of coalgebraic logic, thus covering a wide range of logics beyond the standard μ-calculus including, e.g., flat fragments of the graded μ-calculus and the alternating-time μ-calculus (such as ATL), as well as probabilistic and monotone fixed point logics. Our main results are completeness of the Kozen-Park axiomatization and a timed-out tableaux method that matches ExpTime upper bounds inherited from the coalgebraic μ-calculus but avoids using automata.

Infra-red fixed points in supersymmetry

Indian Academy of Sciences (India)

¾c /font>, and c stands for the color quadratic Casimir of the field. Fixed points arise when R* ¼ or when R*. /nobr>. ´S-½. µ ´r ·b¿µ. The stability of the solutions may be tested by linearizing the system about the fixed points. For the non-trivial fixed points we need to consider the eigenvalues of the stability matrix whose ...

International dosimetry experiment on the zero power pile of the Boris Kidric Institute at Vinca (Yugoslavia) (1961); Experience internationale de dosimetrie sur la pile de puissance nulle de l'Institut Boris Kidric de Vinca (Yougoslavie) (1961)

Energy Technology Data Exchange (ETDEWEB)

Weill, J; Furet, J; Baillet, J; Donvez, G; Duchene, J; Gras, R; Mercier, R [Commissariat a l' Energie Atomique, Section Autonome d' Electronique des Reacteurs, Saclay (France). Centre d' Etudes Nucleaires; Chenouard, J; Lecomte, J [Commissariat a l' Energie Atomique, Dept. de Physico - Chimie, Service des Isotopes Stables, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

On the occasion of the international dosimetry experiment on the zero power pile of the Yugoslavian Atomic Energy Centre at Vinca, the Commissariat a l'energie Atomique had agreed to prepare the measurement and security equipment and see to the manipulation of the heavy water, and in addition was responsible for the operation and the starting up of the pile during the experiment. The measurement and security apparatus, developed at Saclay and installed on the pile for low and high pressure runs, is listed, together with the safety equipment added near the control room. The various operations and manipulations carried out on the pile are described: filling with heavy water, starting up, determination of the critical level, testing the efficiency of the rods, operating the pile during the experiments. By operating to a carefully planned schedule, the experiments were, finished before the date fixed by the International Atomic Agency. (authors) [French] Dans le cadre de l'experience internationale de dosimetrie sur la pile de puissance nulle du Centre d'Etudes Nucleaires Yougoslave de Vinca, le Commissariat a l'Energie Atomique avait accepte de preparer l'equipement de controle et de securite, de pourvoir a la manipulation de l'eau lourde de la pile et avait la responsabilite de son fonctionnement et de sa mise en marche pendant l'experience. On enumere ici l'appareillage de controle et de securite installe sur la pile pour les marches a basse et haute puissances, appareillage mis au point a Saclay, ainsi que les protections ajoutees a proximite de la salle de controle. On decrit les differentes manipulations et operations effectuees sur la pile: remplissage d'eau lourde, demarrage, recherche du niveau critique, verification de l'efficacite des barres, conduite de la pile pendant les experiences. Grace a un planning tres serre qui a pu etre tenu, les experiences ont pu etre terminees avant la date prevue par l'Agence Atomique Internationale. (auteurs)

INNOVATIVE SYSTEM OF FIXED CAPITAL REPRODUCTION

Directory of Open Access Journals (Sweden)

G. S. Merzlikina

2015-01-01

Full Text Available The article presents the basic problems of fixed capital reproduction. There are considered a significant depreciation of fixed assets of Russian enterprises. There are presented arguments in favor of urgency of the problem of reproduction of fixed assets of the Russian Federation. The paper presents theoretical evidence base basic types of fixed capital reproduction. There are identified all possible sources of simple and expanded reproduction of capital. There are considered the role of value and feasibility of depreciation in the formation of Reserve reproduction. Suggested the formation of accounting and analytical management provision fixed capital, as well as an innovative system of fixed capital reproduction, which implies the creation of depreciation , capital, revaluation, liquidation reserves. The algorithm of business valuation based on an innovative system of capital reproduction. The algorithm and the possibility of formation of reserves are considered on a concrete example of one of the industrial enterprises of the city Volgograd. On the basis of the algorithm presented calculations of business valuation of the enterprise. Calculations have shown an increase in value of the business condition of the formation of special reserves, which underlines the necessary and urgency of their formation in accounting policy and economy organizations and enterprises of Russia as a whole.

Linear fixed-field multipass arcs for recirculating linear accelerators

Directory of Open Access Journals (Sweden)

V. S. Morozov

2012-06-01

Full Text Available Recirculating linear accelerators (RLA’s provide a compact and efficient way of accelerating particle beams to medium and high energies by reusing the same linac for multiple passes. In the conventional scheme, after each pass, the different energy beams coming out of the linac are separated and directed into appropriate arcs for recirculation, with each pass requiring a separate fixed-energy arc. In this paper we present a concept of an RLA return arc based on linear combined-function magnets, in which two and potentially more consecutive passes with very different energies are transported through the same string of magnets. By adjusting the dipole and quadrupole components of the constituting linear combined-function magnets, the arc is designed to be achromatic and to have zero initial and final reference orbit offsets for all transported beam energies. We demonstrate the concept by developing a design for a droplet-shaped return arc for a dogbone RLA capable of transporting two beam passes with momenta different by a factor of 2. We present the results of tracking simulations of the two passes and lay out the path to end-to-end design and simulation of a complete dogbone RLA.

Fixed mobile convergence handbook

CERN Document Server

Ahson, Syed A

2010-01-01

From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

Global gauge fixing in lattice gauge theories

Energy Technology Data Exchange (ETDEWEB)

Fachin, S.; Parrinello, C. (Physics Department, New York University, 4 Washington Place, New York, New York (USA))

1991-10-15

We propose a covariant, nonperturbative gauge-fixing procedure for lattice gauge theories that avoids the problem of Gribov copies. This is closely related to a recent proposal for a gauge fixing in the continuum that we review. The lattice gauge-fixed model allows both analytical and numerical investigations: on the analytical side, explicit nonperturbative calculations of gauge-dependent quantities can be easily performed in the framework of a generalized strong-coupling expansion, while on the numerical side a stochastic gauge-fixing algorithm is very naturally associated with the scheme. In both applications one can study the gauge dependence of the results, since the model actually provides a smooth'' family of gauge-fixing conditions.

Evolutionary and geologic consequences of organic carbon fixing in the primitive anoxic ocean

Science.gov (United States)

Berry, W. B. N.; Wilde, P.

1983-03-01

Steps leading to development of the modern photic-based marine food web are postulated as the result of modifications of the environment, enhanced by the activity of Archean sulfur chemoautotrophs. Such organisms (Anoxium) evolved in an anoxic ocean prior to 3.9 × 109 yr ago at Archean analogs of modern oceanic hydrothermal vents. At this time geothermal energy was more readily available to organisms than photic energy, given atmospheric conditions at the surface similar to Venus, where intensity is low and only middle and red visible wavelengths penetrate the cloudy CO2-rich atmosphere. Competition for the reduced sulfur developed due to oxidation and loss of sulfur to sediments. Consequently, evolutionary advantage shifted to Anoxium isolates that could use alternate energy sources such as light to supplement the diminished supplies of reduced sulfur. Initially, photo-sulfur organisms evolved similar to modern purple bacteria that absorb in the red visible spectra. Subsequent carbon fixing and oxidation improved both the quantity and range of light reaching the ocean surface. This permitted absorption in the blue visible range so that water splitting was now feasible, releasing free oxygen and accelerating oxidation. Eventually, reducing environments became restricted, completing the shift in the principal marine carbon-fixing activity from anoxic chemoautotrophic to aerobic photosynthetic organisms.

Energy Doubler/Saver at Fermilab: a status report

International Nuclear Information System (INIS)

Fowler, W.B.

1977-01-01

Guided, as in the past, by close attention to the developing theoretical and experimental evidence for new phenomena (for example, the discoveries of weak neutral currents, charm, J/psi and the Upsilon) Fermilab has devoted considerable effort to pushing on to higher energies. This seems particularly appropriate since other phenomena is suggested, such as intermediate vector bosons (W + and Z 0 ) etc. The TeV Project at Fermilab pursues both increases in the available energy via doubling the energy of the present accelerator as a fixed target, high intensity proton synchrotron and via colliding beams. These ways are complementary to one another. High energy physics with fixed targets cannot match the energy available in the center of mass system that can be achieved in colliding beams, whereas physics with colliding beams cannot match the intensities or the variety of bombarding particles that can be achieved with fixed targets. Some of the aspects of each technique are given

A fixed-point farrago

CERN Document Server

Shapiro, Joel H

2016-01-01

This text provides an introduction to some of the best-known fixed-point theorems, with an emphasis on their interactions with topics in analysis. The level of exposition increases gradually throughout the book, building from a basic requirement of undergraduate proficiency to graduate-level sophistication. Appendices provide an introduction to (or refresher on) some of the prerequisite material and exercises are integrated into the text, contributing to the volume’s ability to be used as a self-contained text. Readers will find the presentation especially useful for independent study or as a supplement to a graduate course in fixed-point theory. The material is split into four parts: the first introduces the Banach Contraction-Mapping Principle and the Brouwer Fixed-Point Theorem, along with a selection of interesting applications; the second focuses on Brouwer’s theorem and its application to John Nash’s work; the third applies Brouwer’s theorem to spaces of infinite dimension; and the fourth rests ...

48 CFR 1852.216-78 - Firm fixed price.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Firm fixed price. 1852.216... 1852.216-78 Firm fixed price. As prescribed in 1816.202-70, insert the following clause: Firm Fixed Price (DEC 1988) The total firm fixed price of this contract is $[Insert the appropriate amount]. (End...

46 CFR 28.260 - Electronic position fixing devices.

Science.gov (United States)

2010-10-01

... Trade § 28.260 Electronic position fixing devices. Each vessel 79 feet (24 meters) or more in length must be equipped with an electronic position fixing device capable of providing accurate fixes for the... 46 Shipping 1 2010-10-01 2010-10-01 false Electronic position fixing devices. 28.260 Section 28...

Testing light dark matter coannihilation with fixed-target experiments

Energy Technology Data Exchange (ETDEWEB)

Izaguirre, Eder; Kahn, Yonatan; Krnjaic, Gordan; Moschella, Matthew

2017-09-01

In this paper, we introduce a novel program of fixed-target searches for thermal-origin Dark Matter (DM), which couples inelastically to the Standard Model. Since the DM only interacts by transitioning to a heavier state, freeze-out proceeds via coannihilation and the unstable heavier state is depleted at later times. For sufficiently large mass splittings, direct detection is kinematically forbidden and indirect detection is impossible, so this scenario can only be tested with accelerators. Here we propose new searches at proton and electron beam fixed-target experiments to probe sub-GeV coannihilation, exploiting the distinctive signals of up- and down-scattering as well as decay of the excited state inside the detector volume. We focus on a representative model in which DM is a pseudo-Dirac fermion coupled to a hidden gauge field (dark photon), which kinetically mixes with the visible photon. We define theoretical targets in this framework and determine the existing bounds by reanalyzing results from previous experiments. We find that LSND, E137, and BaBar data already place strong constraints on the parameter space consistent with a thermal freeze-out origin, and that future searches at Belle II and MiniBooNE, as well as recently-proposed fixed-target experiments such as LDMX and BDX, can cover nearly all remaining gaps. We also briefly comment on the discovery potential for proposed beam dump and neutrino experiments which operate at much higher beam energies.

Overview of P.I.E. techniques for L.W.R. fuels at Saclay hot cells with special emphasis on new apparatus and on mechanical testing

International Nuclear Information System (INIS)

Blanc, J.Y.; Hardy, J.L.; Trotabas, M.

1990-01-01

This paper describes the state-of-the-art in the Saclay hot cells for examining L.W.R. fuels. First, we present the classical path followed by a fuel rod in the laboratory, to begin with non-destructive testing. This is completed by destructive examinations, such as free volume determination and fission gases analyses, density measurement and metallographies including X-rays diffraction and microprobe (EPMA/WDX). These two last techniques enable the identification of elements and chemical nature of compounds which are present. We also perform mechanical tests on metallic components, on clads and guide-tubes (tensile tests, creep, burst or fatigue tests by internal pressure). Another apparatus is devoted to the study of irradiated clad behaviour during LOCA-type transients. In the second chapter, a particular emphasis is given to the developments in progress, or planned in the near future. This includes: (a) The implementation of a new non-destructive testing bench to inspect more fuel rods simultaneously. (b) A new image analyzer to be applied e.g. to hydrides analysis in the clad, or to the inspection of safety test fuel bundles. (c) As for mechanical testing, we describe here the tensile tests on clads or on guide-tubes, performed on longitudinal samples or ring samples

Evaluation of a Novel BEV Concept Based on Fixed and Swappable Li-Ion Battery Packs

DEFF Research Database (Denmark)

Barreras, Jorge Varela; Pinto, Claudio; de Castro, Ricardo

2016-01-01

-based ownership models to distribute the cost of the large battery pack over the vehicle lifetime. A methodology is proposed for the analysis and evaluation of the proposed concept in comparison with a direct owned nonswappable single-pack BEV, proving that significant improvements on city fuel economy (up to 14......In this paper, a novel battery electric vehicle (BEV) concept based on a small fixed and a big swappable Li-ion battery pack is proposed in order to achieve longer range, lower initial purchase priceand lower energy consumption at short ranges. For short ranges, the BEV is only powered...... by the relatively small-fixed battery pack, without the large swappable battery pack. In this way, the mass of the vehicle is reduced and, therefore, the energy consumed per unit distance is improved. For higher ranges, the BEV is powered by both battery packs. This concept allows the introduction of subscription...

Prosthetic rehabilitation using adhesive bridge and fixed-fixed bridge on the maxilla and telescopic crown overdenture on mandible

Directory of Open Access Journals (Sweden)

Indah Sulistiawaty

2016-12-01

Full Text Available Prosthetic rehabilitation is the rehabilitation process of masticatory and esthetics function for patients missing teeth and alveolar bone by means of manufacture and installation of dentures. The prosthetic rehabilitation commonly used include denture adhesive bridge, fixed-fixed bridge, as well as telescopic overdenture. Adhesive bridge is bridge denture consisting of single pontic and two retainer wings attached to the abutment using cement or resin. Fixed-fixed bridge is a bridge denture with rigid connectors on both ends of the pontics, whereas the telescopic crown Overdenture is a removable denture that uses linked precision on the original tooth in the form of primary coping on abutment and secondary coping on the denture. To expose the procedures of prosthetic rehabilitation using adhesive bridge and fixed-fixed bridge on the maxilla and telescopic crown Overdenture on mandible. Male patients aged 32 years came with complaints of difficulty to chew food because he had lost some teeth behind. In the maxilla, teeth are lost in the region of 15 and 16 performed by making the fixed-fixed bridge with abutment teeth 14 and 17. Loss of teeth in the region of 26, performed the manufacture of adhesive bridge with a box preparation on the occlusal 25 and 27. In the mandible, tooth loss in the region of 36,37,46, and 47 performed manufacture of telescopic crown Overdenture with primer coping on the teeth 35.38, 45, and 48 and the secondary coping on a metal frame. Prosthetic rehabilitation especially in the case of loss of back teeth is very important because with the denture patients can chew properly and maintain the stomatognathic system.

A new compact fixed-point blackbody furnace

International Nuclear Information System (INIS)

Hiraka, K.; Oikawa, H.; Shimizu, T.; Kadoya, S.; Kobayashi, T.; Yamada, Y.; Ishii, J.

2013-01-01

More and more NMIs are realizing their primary scale themselves with fixed-point blackbodies as their reference standard. However, commercially available fixed-point blackbody furnaces of sufficient quality are not always easy to obtain. CHINO Corp. and NMIJ, AIST jointly developed a new compact fixed-point blackbody furnace. The new furnace has such features as 1) improved temperature uniformity when compared to previous products, enabling better plateau quality, 2) adoption of the hybrid fixed-point cell structure with internal insulation to improve robustness and thereby to extend lifetime, 3) easily ejectable and replaceable heater unit and fixed-point cell design, leading to reduced maintenance cost, 4) interchangeability among multiple fixed points from In to Cu points. The replaceable cell feature facilitates long term maintenance of the scale through management of a group of fixed-point cells of the same type. The compact furnace is easily transportable and therefore can also function as a traveling standard for disseminating the radiation temperature scale, and for maintaining the scale at the secondary level and industrial calibration laboratories. It is expected that the furnace will play a key role of the traveling standard in the anticipated APMP supplementary comparison of the radiation thermometry scale

Characterization of Old Nuclear Waste Packages Coupling Photon Activation Analysis and Complementary Non-Destructive Techniques

International Nuclear Information System (INIS)

Carrel, Frederick; Coulon, Romain; Laine, Frederic; Normand, Stephane; Sari, Adrien; Charbonnier, Bruno; Salmon, Corine

2013-06-01

Radiological characterization of nuclear waste packages is an industrial issue in order to select the best mode of storage. The characterization becomes crucial particularly for waste packages produced at the beginning of the French nuclear industry. For the latter, available information is often incomplete and some key parameters are sometimes missing (content of the package, alpha-activity, fissile mass...) In this case, the use of non-destructive methods, both passive and active, is an appropriate solution to characterize nuclear waste packages and to obtain all the information of interest. In this article, we present the results of a complete characterization carried out on the TE 1060 block, which is a nuclear waste package produced during the 1960's in Saclay. This characterization is part of the DEMSAC (Dismantling of Saclay's facilities) project (ICPE part). It has been carried out in the SAPHIR facility, located in Saclay and housing a linear electron accelerator. This work enables to show the great interest of active methods (photon activation analysis and high-energy imaging) as soon as passive techniques encounter severe limitations. (authors)

Impact of Shaft Stiffness on Inertial Response of Fixed Speed Wind Turbines

Institute of Scientific and Technical Information of China (English)

2012-01-01

Future power＇ system faces several challenges, one of them is the high penetration level of intermittent wind power generation, providing small or even no inertial response and being not contributing to the frequency stability. The effect of shaft stiffness on inertial response of fixed speed wind turbines is presented. Four different drive-train models based on the multi-body system are developed. The small-signal analysis demonstrates no significant differences between models in terms of electro-mechanical eigen-values for increasing shaft stiffness. The natural resonance frequency of drive-train torsion modes shows slightly different values between damped and undamped models, but no significant differences are found in the number-mass models. Time-domain simulations show the changes in the active power contribution of a wind farm based on a fixed speed wind turbine during the system frequency disturbance. The changes in the kinetic energy during the dynamic process are calculated and their contribution to the inertia constant is small and effective. The largest contribution of the kinetic energy is provided at the beginning of the system frequency disturbance to reduce the rate of the frequency change, it is positive for the frequency stability.

Current experiments in elementary particle physics

Energy Technology Data Exchange (ETDEWEB)

Wohl, C.G.; Armstrong, F.E., Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Frosch, R.; Olin, A.; Lehar, F.; Moskalev, A.N.; Barkov, B.P.

1987-03-01

This report contains summaries of 720 recent and current experiments in elementary particle physics (experiments that finished taking data before 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized.

Current experiments in elementary particle physics. Revision 1-85

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Rittenberg, A.

1985-01-01

This report contains summaries of 551 approved experiments in elementary particle physics (experiments that finished taking data before 1 January 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Properties of the fixed-target beams at most of the laboratories are summarized. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries

Current experiments in elementary particle physics

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Frosch, R.; Olin, A.; Lehar, F.; Moskalev, A.N.; Barkov, B.P.

1987-03-01

This report contains summaries of 720 recent and current experiments in elementary particle physics (experiments that finished taking data before 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized

A Comprehensive Review of Low-Voltage-Ride-Through Methods for Fixed-Speed Wind Power Generators

DEFF Research Database (Denmark)

Moghadasi, Amirhasan; Sarwat, Arif; Guerrero, Josep M.

2016-01-01

This paper presents a comprehensive review of various techniques employed to enhance the low voltage ride through (LVRT) capability of the fixed-speed induction generators (FSIGs)-based wind turbines (WTs), which has a non-negligible 20% contribution of the existing wind energy in the world...

СURRENT TRENDS OF THE FIXED CAPITAL CONSUMPTION

Directory of Open Access Journals (Sweden)

Nikolay V. Gayfulin

2014-01-01

Full Text Available The research article is devoted to the current trends of the fixed capital consumption, to the problems connected with the fixed capital consumption and to the innovations in the Russian economy where the increase of fixed capital consumption efficiency is of the great importance. Under the conditions of the exchange relations formation and escalating competition only those commodity producers who can make the best use of all kinds of the resources will win. The fixed capital consumption efficiency is defined as a set of a measures which is taken by the economic entities. Some of a measures are partially described in this article. Nowadays the fixed capital consumption problem is connected with the performance enhancement and optimization of the fixed assets items.

Fixed points of quantum operations

International Nuclear Information System (INIS)

Arias, A.; Gheondea, A.; Gudder, S.

2002-01-01

Quantum operations frequently occur in quantum measurement theory, quantum probability, quantum computation, and quantum information theory. If an operator A is invariant under a quantum operation φ, we call A a φ-fixed point. Physically, the φ-fixed points are the operators that are not disturbed by the action of φ. Our main purpose is to answer the following question. If A is a φ-fixed point, is A compatible with the operation elements of φ? We shall show in general that the answer is no and we shall give some sufficient conditions under which the answer is yes. Our results will follow from some general theorems concerning completely positive maps and injectivity of operator systems and von Neumann algebras

Improved Landau gauge fixing and discretisation errors

International Nuclear Information System (INIS)

Bonnet, F.D.R.; Bowman, P.O.; Leinweber, D.B.; Richards, D.G.; Williams, A.G.

2000-01-01

Lattice discretisation errors in the Landau gauge condition are examined. An improved gauge fixing algorithm in which O(a 2 ) errors are removed is presented. O(a 2 ) improvement of the gauge fixing condition displays the secondary benefit of reducing the size of higher-order errors. These results emphasise the importance of implementing an improved gauge fixing condition

Fixed-point signal processing

CERN Document Server

Padgett, Wayne T

2009-01-01

This book is intended to fill the gap between the ""ideal precision"" digital signal processing (DSP) that is widely taught, and the limited precision implementation skills that are commonly required in fixed-point processors and field programmable gate arrays (FPGAs). These skills are often neglected at the university level, particularly for undergraduates. We have attempted to create a resource both for a DSP elective course and for the practicing engineer with a need to understand fixed-point implementation. Although we assume a background in DSP, Chapter 2 contains a review of basic theory

Comparing the efficiency of fixed solar cell panels in a tropical location

Energy Technology Data Exchange (ETDEWEB)

Jumrusprasert, Pattanapong; Smith, Geoff; Kirkup, Leslie [University of Technology, Sydney, NSW (Australia). Physics and Advanced Materials Department, Faculty of Science

2008-07-01

Monocrystalline, polycrystalline and amorphous silicon solar cell panels were installed side-by-side on the same fixed rig to determine the relative performance in a tropical location. This study was conducted at Nakhon Ratchasima Rajabhat University, Thailand. The fixed panel rig was positioned at a tilt angle of 30 , facing south. Overall performance of the solar cell panels is given via both annual output and an average conversion efficiency over one whole year. The results show that for a fixed orientation the monocrystalline, polycrystalline and amorphous panels, had average conversion efficiencies of 6.8%{+-}2.4%, 5.7%{+-}2.0% and 4.2%{+-}1.5% respectively in terms of total incident solar energies on the plane of cells which were 809.4 kW . a/m2, 860.8 kW . a/m2 and 820.6 kW.year/m{sup 2} respectively. The uncertainties shown represent the standard deviation in the conversion efficiencies determined over the 12 month period of the study. These conversion efficiencies are lower than expected but are in part due to local conditions and their significant impact on movements in the maximum power point, which was not tracked in these fixed load experiments. This study also examined the effects of ambient air temperature and wind speed close to the panels which in this locale had very little impact on conversion efficiency. A detailed economic analysis was then carried out including relative maintenance costs. In terms of return on investment the panels ranked in their performance order; fixed monocrystalline, then polycrystalline and finally amorphous but the overall economics was not attractive and significant system cost reductions are needed. (orig.)

Coral reefs as eco-energy factories. Eco-energy kichi to shite no sangosho

Energy Technology Data Exchange (ETDEWEB)

Nozaki, K [Electrochemical Laboratory, Tsukuba (Japan)

1993-05-01

This paper gives an outline of basic problems related to possibilities of CO2 fixing technologies using coral reefs, and problems in their development. The paper describes that primary production (of organic matters) per unit area of a coral reef shows a value exceeding that with tropical rain forests. However, with respect to whether an effective CO2 fixing system could be structured, there are questions to be answered to CO2 fixing mechanisms in coral reefs and to where organic matters produced in coral reefs would go. For the latter problem, the following three cases may be assumed: Accumulation in coral bottom materials; flow-out from a coral reef and transfer to deep ocean layers; and decomposition into CO2 and water as a result of actions of microorganisms. As regards development of CO2 fixing technologies, the paper indicates necessity of discussions on the following matters: Utilization of ocean thermal energy conversion in addition to promoting CO2 fixation using coral reefs; dissolution of coral reef limestone by injecting liquefied CO2; and utilization of coral reefs as energy transportation relaying stations. 3 refs., 2 figs.

A Hybrid Mineral Battery: Energy Storage and Dissolution Behavior of CuFeS2 in a Fixed Bed Flow Cell.

Science.gov (United States)

Deen, Kashif Mairaj; Asselin, Edouard

2018-05-09

The development of a hybrid system capable of storing energy and the additional benefit of Cu extraction is discussed in this work. A fixed bed flow cell (FBFC) was used in which a composite negative electrode containing CuFeS 2 (80 wt %) and carbon black (20 wt %) in graphite felt was separated from a positive (graphite felt) electrode by a proton-exchange membrane. The anolyte (0.2 m H 2 SO 4 ) and catholyte (0.5 m Fe 2+ in 0.2 m H 2 SO 4 with or without 0.1 m Cu 2+ ) were circulated in the cell. The electrochemical activity of the Fe 2+ /Fe 3+ redox couple over graphite felt significantly improved after the addition of Cu 2+ in the catholyte. Ultimately, in the CuFeS 2 ∥Fe 2+ /Cu 2+ (CFeCu) FBFC system, the specific capacity increased continuously to 26.4 mAh g -1 in 500 galvanostatic charge-discharge (GCD) cycles, compared to the CuFeS 2 ∥Fe 2+ (CFe) system (13.9 mAh g -1 ). Interestingly, the specific discharge energy gradually increased to 3.6 Wh kg -1 in 500 GCD cycles for the CFeCu system compared to 3.29 Wh kg -1 for the CFe system in 150 cycles. In addition to energy storage, 10.75 % Cu was also extracted from the mineral, which is an important feature of the CFeCu system as it would allow Cu extraction and recovery through hydrometallurgical methods. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fourier Imaging X-ray Spectrometer (FIXS) for the Argentinian, Scout-launched satelite de Aplicaciones Cienficas-1 (SAC-1)

International Nuclear Information System (INIS)

Dennis, B.R.; Crannell, C.J.; Desai, U.D.

1988-01-01

The Fourier Imaging X-ray Spectrometer (FIXS) is one of four instruments on SAC-1, the Argentinian satellite being proposed for launch by NASA on a Scout rocket in 1992/3. The FIXS is designed to provide solar flare images at X-ray energies between 5 and 35 keV. Observations will be made on arcsecond size scales and subsecond time scales of the processes that modify the electron spectrum and the thermal distribution in flaring magnetic structures

Fixed point theorems in spaces and -trees

Directory of Open Access Journals (Sweden)

Kirk WA

2004-01-01

Full Text Available We show that if is a bounded open set in a complete space , and if is nonexpansive, then always has a fixed point if there exists such that for all . It is also shown that if is a geodesically bounded closed convex subset of a complete -tree with , and if is a continuous mapping for which for some and all , then has a fixed point. It is also noted that a geodesically bounded complete -tree has the fixed point property for continuous mappings. These latter results are used to obtain variants of the classical fixed edge theorem in graph theory.

Comparing topological charge definitions using topology fixing actions

International Nuclear Information System (INIS)

Bruckmann, Falk; Gruber, Florian; Jansen, Karl; Marinkovic, Marina; Urbach, Carsten; Wagner, Marc

2009-05-01

We investigate both the hyperbolic action and the determinant ratio action designed to fix the topological charge on the lattice. We show to what extent topology is fixed depending on the parameters of these actions, keeping the physical situation fixed. At the same time the agreement between different definitions of topological charge - the field theoretic and the index definition - is directly correlated to the degree topology is fixed. Moreover, it turns out that the two definitions agree very well. We also study finite volume effects arising in the static potential and related quantities due to topology fixing. (orig.)

The price of fixed income market volatility

CERN Document Server

Mele, Antonio

2015-01-01

Fixed income volatility and equity volatility evolve heterogeneously over time, co-moving disproportionately during periods of global imbalances and each reacting to events of different nature. While the methodology for options-based "model-free" pricing of equity volatility has been known for some time, little is known about analogous methodologies for pricing various fixed income volatilities. This book fills this gap and provides a unified evaluation framework of fixed income volatility while dealing with disparate markets such as interest-rate swaps, government bonds, time-deposits and credit. It develops model-free, forward looking indexes of fixed-income volatility that match different quoting conventions across various markets, and uncovers subtle yet important pitfalls arising from naïve superimpositions of the standard equity volatility methodology when pricing various fixed income volatilities. The ultimate goal of the authors´ efforts is to make interest rate volatility standardization a valuable...

The nitrogen biological fixing as support for renewable energy production; A fixacao biologica de nitrogenio como suporte para a producao de energia renovavel

Energy Technology Data Exchange (ETDEWEB)

Quesada, Diego Mureb; Frade, Catia; Resende, Alexander; Polidoro, Jose Carlos; Reis, Veronica Massena; Boddey, Robert; Alves, Bruno Jose Rodrigues; Urquiaga, Segundo [EMBRAPA, Seropedica, RJ (Brazil). Setor de Agrobiologia; Xavier, Deise [EMBRAPA, Juiz de Fora, MG (Brazil). Gado de Leite

2000-07-01

Recently, rapid-growing grasses which possess the C4 photosynthetic pathway such as Miscanthus and Pennisetum spp. have been considered as prime candidates for the production of bio-fuels. In the case of Pennisetum purpureum (Elephant grass) and related hybrids, the genotypes studied until now have generally been selected for high production of forage for cattle under high N fertiliser additions. For forage production it is desirable that the tissues have high protein content. However, for biomass production the priority should be for carbon accumulation and the highest possible biomass production per unit of applied fertiliser. The manufacture of N fertiliser involves a very high cost in terms of fossil energy, and if large additions are made the grass biomass produced may have only a little more (or even less) calorific value than that utilised in the manufacture of the fertiliser. This completely negates the prime objective of bio fuel production which the replacement of energy derived from non-renewable fossil sources with that derived from solar radiation. Recently the team headed by Dr Johanna Doebereiner at EMBRAPA Agrobiologia have shown that several tropical grasses (including sugar cane and elephant grass) are able to obtain significant quantities of N through the action of associated endo phytic N{sub 2}-fixing bacteria. Derived from this line of reasoning a study is being conducted in the field to select appropriate genotypes of Pennisetum purpureum which are efficient is biomass production in soil of very low N fertility. In the first stage four genotypes have been selected : Gramafante, Cameroon, BAG 02 and Roxo, which have been the most productive over a 5 year period without N fertiliser addition.A complementary study is underway to evaluate biomass production and quantify the N{sub 2} fixation input. Preliminary results are promising and show that these materials produce well without N fertiliser application a with a contribution of approximately

47 CFR 101.85 - Transition of the 18.3-19.3 GHz band from the terrestrial fixed services to the fixed-satellite...

Science.gov (United States)

2010-10-01

... terrestrial fixed services to the fixed-satellite service (FSS). 101.85 Section 101.85 Telecommunication... Transition of the 18.3-19.3 GHz band from the terrestrial fixed services to the fixed-satellite service (FSS...-satellite service (FSS). The rules in this section provide for a transition period during which FSS...

Numerical modelling of biomass combustion: Solid conversion processes in a fixed bed furnace

Science.gov (United States)

Karim, Md. Rezwanul; Naser, Jamal

2017-06-01

Increasing demand for energy and rising concerns over global warming has urged the use of renewable energy sources to carry a sustainable development of the world. Bio mass is a renewable energy which has become an important fuel to produce thermal energy or electricity. It is an eco-friendly source of energy as it reduces carbon dioxide emissions. Combustion of solid biomass is a complex phenomenon due to its large varieties and physical structures. Among various systems, fixed bed combustion is the most commonly used technique for thermal conversion of solid biomass. But inadequate knowledge on complex solid conversion processes has limited the development of such combustion system. Numerical modelling of this combustion system has some advantages over experimental analysis. Many important system parameters (e.g. temperature, density, solid fraction) can be estimated inside the entire domain under different working conditions. In this work, a complete numerical model is used for solid conversion processes of biomass combustion in a fixed bed furnace. The combustion system is divided in to solid and gas phase. This model includes several sub models to characterize the solid phase of the combustion with several variables. User defined subroutines are used to introduce solid phase variables in commercial CFD code. Gas phase of combustion is resolved using built-in module of CFD code. Heat transfer model is modified to predict the temperature of solid and gas phases with special radiation heat transfer solution for considering the high absorptivity of the medium. Considering all solid conversion processes the solid phase variables are evaluated. Results obtained are discussed with reference from an experimental burner.

Numerical and experimental investigation of wave dynamics on a land-fixed OWC device

International Nuclear Information System (INIS)

Ning, De-Zhi; Wang, Rong-Quan; Gou, Ying; Zhao, Ming; Teng, Bin

2016-01-01

An Oscillating Water Column (OWC) Wave Energy Converter (WEC) is a device that converts the energy of ocean waves to electrical energy. When an OWC is designed, both its energy efficiency and the wave loads on it should be considered. Most attentions have been paid to the energy efficiency of an OWC device in the past several decades. In the present study, the fully nonlinear numerical wave model developed by Ning et al. (2015) [1] is extended to simulate the dynamic wave forces on the land-fixed OWC device by using the acceleration potential method, and the experimental tests are also carried out. The comparisons between numerical results and experimental data are performed. Then the effects of wave conditions and chamber geometry on the wave force on the front wall of the chamber are investigated. The results indicate that the total wave force decreases with the increase of the wavelength and increases with the increase of the incident wave height. The wave force is also strongly influenced by the opening ratio, i.e., in the low-frequency region, the larger the opening ratio, the smaller the wave force and it shows an opposite tendency in the high-frequency region. - Highlights: • The wave dynamics on a land-fixed OWC device is numerically and experimentally studied. • The largest wave pressure occurs on the outside of the front wall on the free surface under the action of the wave crest. • The total horizontal wave load on the front wall decreases with the increase of the wavelength. • The opening ratio greatly influences the wave force on the front wall.

Communication: Toward an improved control of the fixed-node error in quantum Monte Carlo: The case of the water molecule

International Nuclear Information System (INIS)

Caffarel, Michel; Applencourt, Thomas; Scemama, Anthony; Giner, Emmanuel

2016-01-01

All-electron Fixed-node Diffusion Monte Carlo calculations for the nonrelativistic ground-state energy of the water molecule at equilibrium geometry are presented. The determinantal part of the trial wavefunction is obtained from a selected Configuration Interaction calculation [Configuration Interaction using a Perturbative Selection done Iteratively (CIPSI) method] including up to about 1.4 × 10 6 of determinants. Calculations are made using the cc-pCVnZ family of basis sets, with n = 2 to 5. In contrast with most quantum Monte Carlo works no re-optimization of the determinantal part in presence of a Jastrow is performed. For the largest cc-pCV5Z basis set the lowest upper bound for the ground-state energy reported so far of −76.437 44(18) is obtained. The fixed-node energy is found to decrease regularly as a function of the cardinal number n and the Complete Basis Set limit associated with exact nodes is easily extracted. The resulting energy of −76.438 94(12) — in perfect agreement with the best experimentally derived value — is the most accurate theoretical estimate reported so far. We emphasize that employing selected configuration interaction nodes of increasing quality in a given family of basis sets may represent a simple, deterministic, reproducible, and systematic way of controlling the fixed-node error in diffusion Monte Carlo.

Communication: Toward an improved control of the fixed-node error in quantum Monte Carlo: The case of the water molecule

Energy Technology Data Exchange (ETDEWEB)

Caffarel, Michel; Applencourt, Thomas; Scemama, Anthony [Laboratoire de Chimie et Physique Quantique, CNRS-Université de Toulouse, Toulouse (France); Giner, Emmanuel [Dipartimento di Scienze Chimiche e Farmaceutiche, Universit degli Studi di Ferrara, Ferrara (Italy)

2016-04-21

All-electron Fixed-node Diffusion Monte Carlo calculations for the nonrelativistic ground-state energy of the water molecule at equilibrium geometry are presented. The determinantal part of the trial wavefunction is obtained from a selected Configuration Interaction calculation [Configuration Interaction using a Perturbative Selection done Iteratively (CIPSI) method] including up to about 1.4 × 10{sup 6} of determinants. Calculations are made using the cc-pCVnZ family of basis sets, with n = 2 to 5. In contrast with most quantum Monte Carlo works no re-optimization of the determinantal part in presence of a Jastrow is performed. For the largest cc-pCV5Z basis set the lowest upper bound for the ground-state energy reported so far of −76.437 44(18) is obtained. The fixed-node energy is found to decrease regularly as a function of the cardinal number n and the Complete Basis Set limit associated with exact nodes is easily extracted. The resulting energy of −76.438 94(12) — in perfect agreement with the best experimentally derived value — is the most accurate theoretical estimate reported so far. We emphasize that employing selected configuration interaction nodes of increasing quality in a given family of basis sets may represent a simple, deterministic, reproducible, and systematic way of controlling the fixed-node error in diffusion Monte Carlo.

Common fixed points for weakly compatible maps

Indian Academy of Sciences (India)

Springer Verlag Heidelberg #4 2048 1996 Dec 15 10:16:45

In 1976, Jungck [4] proved a common fixed point theorem for commuting maps generalizing the Banach's fixed point theorem, which states that, 'let (X, d) be a complete metric space. If T satisfies d(Tx,Ty) ≤ kd(x,y) for each x,y ∈ X where 0 ≤ k < 1, then T has a unique fixed point in X'. This theorem has many applications, ...

Hadron cancer therapy complex using nonscaling fixed field alternating gradient accelerator and gantry design

Directory of Open Access Journals (Sweden)

E. Keil

2007-05-01

Full Text Available Nonscaling fixed field alternating gradient (FFAG rings for cancer hadron therapy offer reduced physical aperture and large dynamic aperture as compared to scaling FFAGs. The variation of tune with energy implies the crossing of resonances during acceleration. Our design avoids intrinsic resonances, although imperfection resonances must be crossed. We consider a system of three nonscaling FFAG rings for cancer therapy with 250 MeV protons and 400   MeV/u carbon ions. Hadrons are accelerated in a common radio frequency quadrupole and linear accelerator, and injected into the FFAG rings at v/c=0.1294. H^{+}/C^{6+} ions are accelerated in the two smaller/larger rings to 31 and 250  MeV/68.8 and 400   MeV/u kinetic energy, respectively. The lattices consist of doublet cells with a straight section for rf cavities. The gantry with triplet cells accepts the whole required momentum range at fixed field. This unique design uses either high-temperature superconductors or superconducting magnets reducing gantry magnet size and weight. Elements with a variable field at the beginning and at the end set the extracted beam at the correct position for a range of energies.

Coupling model of energy consumption with changes in environmental utility

International Nuclear Information System (INIS)

He Hongming; Jim, C.Y.

2012-01-01

This study explores the relationships between metropolis energy consumption and environmental utility changes by a proposed Environmental Utility of Energy Consumption (EUEC) model. Based on the dynamic equilibrium of input–output economics theory, it considers three simulation scenarios: fixed-technology, technological-innovation, and green-building effect. It is applied to analyse Hong Kong in 1980–2007. Continual increase in energy consumption with rapid economic growth degraded environmental utility. First, energy consumption at fixed-technology was determined by economic outcome. In 1990, it reached a critical balanced state when energy consumption was 22×10 9 kWh. Before 1990 (x 1 9 kWh), rise in energy consumption improved both economic development and environmental utility. After 1990 (x 1 >22×10 9 kWh), expansion of energy consumption facilitated socio-economic development but suppressed environmental benefits. Second, technological-innovation strongly influenced energy demand and improved environmental benefits. The balanced state remained in 1999 when energy consumption reached 32.33×10 9 kWh. Technological-innovation dampened energy consumption by 12.99%, exceeding the fixed-technology condition. Finally, green buildings reduced energy consumption by an average of 17.5% in 1990–2007. They contributed significantly to energy saving, and buffered temperature fluctuations between external and internal environment. The case investigations verified the efficiency of the EUEC model, which can effectively evaluate the interplay of energy consumption and environmental quality. - Highlights: ► We explore relationships between metropolis energy consumption and environmental utility. ► An Environmental Utility of Energy Consumption (EUEC) model is proposed. ► Technological innovation mitigates energy consumption impacts on environmental quality. ► Technological innovation decreases demand of energy consumption more than fixed technology scenario

Linear Fixed-Field Multi-Pass Arcs for Recirculating Linear Accelerators

International Nuclear Information System (INIS)

Morozov, V.S.; Bogacz, S.A.; Roblin, Y.R.; Beard, K.B.

2012-01-01

Recirculating Linear Accelerators (RLA's) provide a compact and efficient way of accelerating particle beams to medium and high energies by reusing the same linac for multiple passes. In the conventional scheme, after each pass, the different energy beams coming out of the linac are separated and directed into appropriate arcs for recirculation, with each pass requiring a separate fixed-energy arc. In this paper we present a concept of an RLA return arc based on linear combined-function magnets, in which two and potentially more consecutive passes with very different energies are transported through the same string of magnets. By adjusting the dipole and quadrupole components of the constituting linear combined-function magnets, the arc is designed to be achromatic and to have zero initial and final reference orbit offsets for all transported beam energies. We demonstrate the concept by developing a design for a droplet-shaped return arc for a dog-bone RLA capable of transporting two beam passes with momenta different by a factor of two. We present the results of tracking simulations of the two passes and lay out the path to end-to-end design and simulation of a complete dog-bone RLA.

Fixed-Rate Compressed Floating-Point Arrays.

Science.gov (United States)

Lindstrom, Peter

2014-12-01

Current compression schemes for floating-point data commonly take fixed-precision values and compress them to a variable-length bit stream, complicating memory management and random access. We present a fixed-rate, near-lossless compression scheme that maps small blocks of 4(d) values in d dimensions to a fixed, user-specified number of bits per block, thereby allowing read and write random access to compressed floating-point data at block granularity. Our approach is inspired by fixed-rate texture compression methods widely adopted in graphics hardware, but has been tailored to the high dynamic range and precision demands of scientific applications. Our compressor is based on a new, lifted, orthogonal block transform and embedded coding, allowing each per-block bit stream to be truncated at any point if desired, thus facilitating bit rate selection using a single compression scheme. To avoid compression or decompression upon every data access, we employ a software write-back cache of uncompressed blocks. Our compressor has been designed with computational simplicity and speed in mind to allow for the possibility of a hardware implementation, and uses only a small number of fixed-point arithmetic operations per compressed value. We demonstrate the viability and benefits of lossy compression in several applications, including visualization, quantitative data analysis, and numerical simulation.

Fixed Duration Pursuit-Evasion Differential Game with Integral Constraints

International Nuclear Information System (INIS)

Ibragimov G I; Kuchkarov A Sh

2013-01-01

We investigate a pursuit-evasion differential game of countably many pursuers and one evader. Integral constraints are imposed on control functions of the players. Duration of the game is fixed and the payoff of the game is infimum of the distances between the evader and pursuers when the game is completed. Purpose of the pursuers is to minimize the payoff and that of the evader is to maximize it. Optimal strategies of the players are constructed, and the value of the game is found. It should be noted that energy resource of any pursuer may be less than that of the evader.

Classification of nuclear plant cost to energy

International Nuclear Information System (INIS)

Long, G.A.

1983-01-01

In order to understand why the fixed-cost/variable-cost method of classifying nuclear plant costs can lead to rate discontinuities, the author must examine the factors which lead to the decision to build a nuclear power plant and the interrelationship between demand (KW) and energy (KWH). The problems and inequities associated with the nuclear plants can be avoided by recognizing that fixed costs are related to both demand and energy and by using a costing methodology which closely relates to the functional purpose of the plant. Generally, this leads to classifying fixed costs of nuclear plants primarily to the energy function in an embedded cost-of-service study and through either implicit or explicit recognition of fuel savings in a marginal cost study. The large rate discontinuities which occurred in the scenario can be resolved. Costs associated with demand or energy charges remain relatively stable compared to actual capacity costs and customers would not experience large changes in their bills due solely to a particular costing convention

The computation of fixed points and applications

CERN Document Server

Todd, Michael J

1976-01-01

Fixed-point algorithms have diverse applications in economics, optimization, game theory and the numerical solution of boundary-value problems. Since Scarf's pioneering work [56,57] on obtaining approximate fixed points of continuous mappings, a great deal of research has been done in extending the applicability and improving the efficiency of fixed-point methods. Much of this work is available only in research papers, although Scarf's book [58] gives a remarkably clear exposition of the power of fixed-point methods. However, the algorithms described by Scarf have been super~eded by the more sophisticated restart and homotopy techniques of Merrill [~8,~9] and Eaves and Saigal [1~,16]. To understand the more efficient algorithms one must become familiar with the notions of triangulation and simplicial approxi- tion, whereas Scarf stresses the concept of primitive set. These notes are intended to introduce to a wider audience the most recent fixed-point methods and their applications. Our approach is therefore ...

Fixed point theory in metric type spaces

CERN Document Server

Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco

2015-01-01

Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...

Algorithms for solving common fixed point problems

CERN Document Server

Zaslavski, Alexander J

2018-01-01

This book details approximate solutions to common fixed point problems and convex feasibility problems in the presence of perturbations. Convex feasibility problems search for a common point of a finite collection of subsets in a Hilbert space; common fixed point problems pursue a common fixed point of a finite collection of self-mappings in a Hilbert space. A variety of algorithms are considered in this book for solving both types of problems, the study of which has fueled a rapidly growing area of research. This monograph is timely and highlights the numerous applications to engineering, computed tomography, and radiation therapy planning. Totaling eight chapters, this book begins with an introduction to foundational material and moves on to examine iterative methods in metric spaces. The dynamic string-averaging methods for common fixed point problems in normed space are analyzed in Chapter 3. Dynamic string methods, for common fixed point problems in a metric space are introduced and discussed in Chapter ...

Tevatron energy and luminosity upgrades beyond the Main Injector

International Nuclear Information System (INIS)

Amidei, D.; Kamon, T.; Lopez, J.; McIntyre, P.; White, J.

1994-08-01

The Fermilab Tevatron will be the world's highest energy hadron collider until the LHC is commissioned, it has the world's highest energy fixed target beams, and Fermilab will be the leading high energy physics laboratory in the US for the foreseeable future. Following the demise of the SSC, a number of possible upgrades to the Tevatron complex, beyond construction of the Main Injector, are being discussed. Using existing technology, it appears possible to increase the luminosity of the bar pp Collider to at least 10 33 cm -2 sec -1 (Tevatron-Star) and to increase the beam energy to 2 TeV (DiTevatron). Fixed target beam of energy about 1.5 TeV could also be delivered. Leaving the existing Tevatron in the tunnel and constructing bypasses around the collider halls would allow simultaneous 800 GeV fixed target and √s = 4 TeV collider operation. These upgrades would give Fermilab an exciting physics program which would be complementary to the LHC, and they would lay the groundwork for the construction of a possible post-LHC ultra-high energy hadron collider

78 FR 20705 - Fixed Income Roundtable

Science.gov (United States)

2013-04-05

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-69275; File No. 4-660] Fixed Income Roundtable... of fixed income markets. The roundtable will focus on the municipal securities, corporate bonds, and asset-backed securities markets. The roundtable discussion will be held in the multi-purpose room of the...

Mining Repair Actions for Guiding Automated Program Fixing

OpenAIRE

Martinez , Matias; Monperrus , Martin

2012-01-01

Automated program fixing consists of generating source code in order to fix bugs in an automated manner. Our intuition is that automated program fixing can imitate human-based program fixing. Hence, we present a method to mine repair actions from software repositories. A repair action is a small semantic modification on code such as adding a method call. We then decorate repair actions with a probability distribution also learnt from software repositories. Our probabilistic repair models enab...

48 CFR 16.202 - Firm-fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Firm-fixed-price contracts. 16.202 Section 16.202 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.202 Firm-fixed-price...

Precise Point Positioning with Partial Ambiguity Fixing.

Science.gov (United States)

Li, Pan; Zhang, Xiaohong

2015-06-10

Reliable and rapid ambiguity resolution (AR) is the key to fast precise point positioning (PPP). We propose a modified partial ambiguity resolution (PAR) method, in which an elevation and standard deviation criterion are first used to remove the low-precision ambiguity estimates for AR. Subsequently the success rate and ratio-test are simultaneously used in an iterative process to increase the possibility of finding a subset of decorrelated ambiguities which can be fixed with high confidence. One can apply the proposed PAR method to try to achieve an ambiguity-fixed solution when full ambiguity resolution (FAR) fails. We validate this method using data from 450 stations during DOY 021 to 027, 2012. Results demonstrate the proposed PAR method can significantly shorten the time to first fix (TTFF) and increase the fixing rate. Compared with FAR, the average TTFF for PAR is reduced by 14.9% for static PPP and 15.1% for kinematic PPP. Besides, using the PAR method, the average fixing rate can be increased from 83.5% to 98.2% for static PPP, from 80.1% to 95.2% for kinematic PPP respectively. Kinematic PPP accuracy with PAR can also be significantly improved, compared to that with FAR, due to a higher fixing rate.

Annual Energy Review 1999

Energy Technology Data Exchange (ETDEWEB)

Seiferlein, Katherine E. [USDOE Energy Information Administration (EIA), Washington, DC (United States)

2000-07-01

A generation ago the Ford Foundation convened a group of experts to explore and assess the Nation’s energy future, and published their conclusions in A Time To Choose: America’s Energy Future (Cambridge, MA: Ballinger, 1974). The Energy Policy Project developed scenarios of U.S. potential energy use in 1985 and 2000. Now, with 1985 well behind us and 2000 nearly on the record books, it may be of interest to take a look back to see what actually happened and consider what it means for our future. The study group sketched three primary scenarios with differing assumptions about the growth of energy use. The Historical Growth scenario assumed that U.S. energy consumption would continue to expand by 3.4 percent per year, the average rate from 1950 to 1970. This scenario assumed no intentional efforts to change the pattern of consumption, only efforts to encourage development of our energy supply. The Technical Fix scenario anticipated a “conscious national effort to use energy more efficiently through engineering know-how." The Zero Energy Growth scenario, while not clamping down on the economy or calling for austerity, incorporated the Technical Fix efficiencies plus additional efficiencies. This third path anticipated that economic growth would depend less on energy-intensive industries and more on those that require less energy, i.e., the service sector. In 2000, total energy consumption was projected to be 187 quadrillion British thermal units (Btu) in the Historical Growth case, 124 quadrillion Btu in the Technical Fix case, and 100 quadrillion Btu in the Zero Energy Growth case. The Annual Energy Review 1999 reports a preliminary total consumption for 1999 of 97 quadrillion Btu (see Table 1.1), and the Energy Information Administration’s Short-Term Energy Outlook (April 2000) forecasts total energy consumption of 98 quadrillion Btu in 2000. What energy consumption path did the United States actually travel to get from 1974, when the scenarios were drawn

Vilified and Fixed

DEFF Research Database (Denmark)

Jensen, Thessa; Westberg, Lysa

, and imbalances of power between scholars and journalists on one side, and fans on the other are not rare occurrences. An analysis of a number of recent news articles, scholarly works, and websites, shows how the attempt of fixing fandom still prevails. Like Said's view on how the Orient is treated, fandom...... and tween website", 'Teen' managed to outrage fans. It took days and hundreds of comments, tweets, and mails to the publishers, before the article was taken down. Vilification in scholarly works and the media may have significantly lessened in recent years. Still, misunderstandings, applied exoticism...... is similarly exotisised, incorporated, and fixed. Scholars explain how to become better fans, attempting authority over fandom by applying rules to a culture, which already has their own. This, the notion of the 'better fan', devalues the existing discourses, rules, and traditions within fandom. The expert...

Magnetic Fixed Points and Emergent Supersymmetry

DEFF Research Database (Denmark)

Antipin, Oleg; Mojaza, Matin; Pica, Claudio

2013-01-01

We establish in perturbation theory the existence of fixed points along the renormalization group flow for QCD with an adjoint Weyl fermion and scalar matter reminiscent of magnetic duals of QCD [1-3]. We classify the fixed points by analyzing their basin of attraction. We discover that among...

The Fourier Imaging X-ray Spectrometer (FIXS) for the Argentinian, Scout-launched satelite de Aplicaciones Cienficas-1 (SAC-1)

Science.gov (United States)

Dennis, Brian R.; Crannell, Carol JO; Desai, Upendra D.; Orwig, Larry E.; Kiplinger, Alan L.; Schwartz, Richard A.; Hurford, Gordon J.; Emslie, A. Gordon; Machado, Marcos; Wood, Kent

1988-01-01

The Fourier Imaging X-ray Spectrometer (FIXS) is one of four instruments on SAC-1, the Argentinian satellite being proposed for launch by NASA on a Scout rocket in 1992/3. The FIXS is designed to provide solar flare images at X-ray energies between 5 and 35 keV. Observations will be made on arcsecond size scales and subsecond time scales of the processes that modify the electron spectrum and the thermal distribution in flaring magnetic structures.

Energy Efficient Routing Algorithms in Dynamic Optical Core Networks with Dual Energy Sources

DEFF Research Database (Denmark)

Wang, Jiayuan; Fagertun, Anna Manolova; Ruepp, Sarah Renée

2013-01-01

This paper proposes new energy efficient routing algorithms in optical core networks, with the application of solar energy sources and bundled links. A comprehensive solar energy model is described in the proposed network scenarios. Network performance in energy savings, connection blocking...... probability, resource utilization and bundled link usage are evaluated with dynamic network simulations. Results show that algorithms proposed aiming for reducing the dynamic part of the energy consumption of the network may raise the fixed part of the energy consumption meanwhile....

Numerical study of hydrodynamic behavior and conversion efficiency of a two-buoy wave energy converter

Science.gov (United States)

Yang, Cen; Zhang, Yong-liang

2018-04-01

In this paper we propose a two-buoy wave energy converter composed of a heaving semi-submerged cylindrical buoy, a fixed submerged cylindrical buoy and a power take-off (PTO) system, and investigate the effect of the fixed submerged buoy on the hydrodynamics of the heaving semi-submerged buoy based on the three-dimensional potential theory. And the dynamic response of the semi-submerged buoy and the wave energy conversion efficiency of the converter are analyzed. The difference of the hydrodynamics and the wave energy conversion efficiency of a semi-submerged buoy converter with and without a fixed submerged buoy is discussed. It is revealed that the influence of the fixed submerged buoy on the exciting wave force, the added mass, the radiation damping coefficient and the wave energy conversion efficiency can be significant with a considerable variation, depending on the vertical distance between the heaving semi-submerged buoy and the fixed submerged buoy, the diameter ratio of the fixed submerged buoy to the heaving semi-submerged buoy and the water depth.

Adhesives for fixed orthodontic bands.

Science.gov (United States)

Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

2016-10-25

Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

Tariff regulation with energy efficiency goals

International Nuclear Information System (INIS)

Abrardi, Laura; Cambini, Carlo

2015-01-01

We study the optimal tariff structure that could induce a regulated utility to promote energy efficiency by its customers given that it is privately informed about the effectiveness of its effort on demand reduction. The regulator should optimally offer a menu of incentive compatible two-part tariffs. If the firm's energy efficiency activities have a high impact on demand reduction, the consumer should pay a high fixed fee but a low per unit price, approximating the tariff structure to a decoupling policy, which strengthens the firm's incentives to pursue energy conservation. Instead, if the firm's effort to adopt energy efficiency actions is scarcely effective, the tariff is characterized by a low fixed fee but a high price per unit of energy consumed, thus shifting the incentives for energy conservation on consumers. The optimal tariff structure also depends on the cost of the consumer's effort (in case the consumer can also adopt energy efficiency measures) and on the degree of substitutability between the consumer's and the firm's efforts. - Highlights: • We study the optimal tariff structure that induces an utility to adopt energy efficiency activities. • The regulator optimally offer a menu of incentive compatible two-part tariffs. • If energy efficiency activities have a high effectiveness, decoupling emerges as a solution. • If the energy efficiency actions are less effective, the tariff has a higher per unit price and lower fixed fee. • The optimal tariff structure also depends on the degree of substitutability between the consumer's and the firm's efforts

Wall shear stress fixed points in blood flow

Science.gov (United States)

Arzani, Amirhossein; Shadden, Shawn

2017-11-01

Patient-specific computational fluid dynamics produces large datasets, and wall shear stress (WSS) is one of the most important parameters due to its close connection with the biological processes at the wall. While some studies have investigated WSS vectorial features, the WSS fixed points have not received much attention. In this talk, we will discuss the importance of WSS fixed points from three viewpoints. First, we will review how WSS fixed points relate to the flow physics away from the wall. Second, we will discuss how certain types of WSS fixed points lead to high biochemical surface concentration in cardiovascular mass transport problems. Finally, we will introduce a new measure to track the exposure of endothelial cells to WSS fixed points.

THE Economics of Match-Fixing

OpenAIRE

Caruso, Raul

2007-01-01

The phenomenon of match-fixing does constitute a constant element of sport contests. This paper presents a simple formal model in order to explain it. The intuition behind is that an asymmetry in the evaluation of the stake is the key factor leading to match-fixing. In sum, this paper considers a partial equilibrium model of contest where two asymmetric, rational and risk-neutral opponents evaluate differently a contested stake. Differently from common contest models, agents have the option ...

12 CFR 701.36 - FCU ownership of fixed assets.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false FCU ownership of fixed assets. 701.36 Section... ORGANIZATION AND OPERATION OF FEDERAL CREDIT UNIONS § 701.36 FCU ownership of fixed assets. (a) Investment in Fixed Assets. (1) No Federal credit union with $1,000,000 or more in assets may invest in any fixed...

Fixed points of quantum gravity in extra dimensions

International Nuclear Information System (INIS)

Fischer, Peter; Litim, Daniel F.

2006-01-01

We study quantum gravity in more than four dimensions with renormalisation group methods. We find a non-trivial ultraviolet fixed point in the Einstein-Hilbert action. The fixed point connects with the perturbative infrared domain through finite renormalisation group trajectories. We show that our results for fixed points and related scaling exponents are stable. If this picture persists at higher order, quantum gravity in the metric field is asymptotically safe. We discuss signatures of the gravitational fixed point in models with low scale quantum gravity and compact extra dimensions

Dynamic sink assignment for efficient energy consumption in wireless sensor networks

KAUST Repository

Oikonomou, Konstantinos N.

2012-04-01

Efficient energy consumption is a challenging problem in wireless sensor networks (WSNs) and closely related to extending network lifetime. The usual way of tackling this issue for topologies with fixed link weight and fixed sink location, has been shown to be severely affected by the energy hole problem. In this paper, the energy consumption problem is initially studied for WSNs with fixed sink assignment and it is analytically shown that energy consumption is minimized when the sink is assigned to the node that is the solution of a suitably formulated 1-median problem. This motivates the introduction of a dynamic environment where link weights change based on the energy level and the aggregate traffic load of the adjacent nodes. Then, the sink is adaptively allowed to move among neighbor nodes, according to a scalable sink migration strategy. Simulation results support the analytical claims demonstrating energy consumption reduction and an additional network lifetime increment when migration is employed in the dynamic environment. © 2012 IEEE.

Internal audit of costs on fixed assets repair

Directory of Open Access Journals (Sweden)

M.Yu. Samchyk

2016-12-01

Full Text Available The article focuses on the approaches to the process and methods of expenditure audit on repair and modernization of fixed assets and the author considers that there is no single approach to understanding the issue. The author improves the organizational and methodological support of internal audit of expenditures on the fixed assets repair and modernization that forms the accurate information for management repair and modernization of fixed assets. The paper specifies the goals and objectives of internal expenditures on repair and modernization of fixed assets, depending on the sources of such facilities to the company, allowing the author to determine the documentary control methods to be applied by an auditor to perform each task. The article determines the areas of risk components of internal control that can lead to ineffective implementation of authority by officials of an enterprise in the process of fixed assets repair, which can cause inefficient use of resources and, consequently, decrease in the efficiency of the work of fixed assets repair and modernization. The author proposes the list of auditor’s questions to assess the internal control system in the repair of fixed assets and these questions will help identify the significant drawbacks of control means.

The danger of fixed drug combinations.

Science.gov (United States)

Herxheimer, H

1975-07-01

After the second world war a number of pharmaceutical firms which were not able to create new therapeutic substances by their own research, put a great number of fixed drug combinations on the market. Their number quickly increased, as the efficiency of these compounds required no legal proof and as, with appropriate propaganda, large profits could be earned. The number of firms doing this sort of production also increased, and in West Germany, for instance, more than 3/4 of all drugs on the official list are now fixed combinations. Our task is, therefore, to ask for regulations which limit fixed combinations to such preparation the efficiency of which has been shown and whose advantages more than outweigh their disadvantages. The advantages of these preparations are convenience to the patient, avoidance of potential mistakes made possible by too many drugs given on the same day and, perhaps, lower prices. The disadvantages are: 1. The individual optimum dose for a patient cannot be achieved, because in case of a change of dosis all components are changed. 2. Different components may have different duration of action. 3. Different components may have a different bioavailability. 4. Different components may interact. 5. Some components may create tolerance, others not. In many cases fixed combinations have been used to make drugs with poor efficiency financially viable by combining them with very efficient drugs. The existence of thousands of fixed combinations makes the drug market indiscernible and useless. They obscure the relatively few essential drugs and make it difficult for the doctor to find his way amongst the mass of offered medicaments. Few fixed combinations are justifiable. These are well known and they should be permitted as before. All others should be banned until it has been shown that their advantages are greater than their disadvantages.

Local Two-Photon Couplings and the J=0 Fixed Pole in Real and Virtual Compton Scattering

Energy Technology Data Exchange (ETDEWEB)

Brodsky, Stanley J.; Llanes-Estrada, Felipe J.; Szczepaniak, Adam P.

2008-12-05

The local coupling of two photons to the fundamental quark currents of a hadron gives an energy-independent contribution to the Compton amplitude proportional to the charge squared of the struck quark, a contribution which has no analog in hadron scattering reactions. We show that this local contribution has a real phase and is universal, giving the same contribution for real or virtual Compton scattering for any photon virtuality and skewness at fixed momentum transfer squared t. The t-dependence of this J = 0 fixed Regge pole is parameterized by a yet unmeasured even charge-conjugation form factor of the target nucleon. The t = 0 limit gives an important constraint on the dependence of the nucleon mass on the quark mass through the Weisberger relation. We discuss how this 1=x form factor can be extracted from high energy deeply virtual Compton scattering and examine predictions given by models of the H generalized parton distribution.

33 CFR 118.65 - Lights on fixed bridges.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on fixed bridges. 118.65 Section 118.65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.65 Lights on fixed bridges. (a) Each fixed bridge span over a navigable...

48 CFR 52.243-1 - Changes-Fixed-Price.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Changes-Fixed-Price. 52....243-1 Changes—Fixed-Price. As prescribed in 43.205(e), insert the following clause: Changes—Fixed-Price (AUG 1987) (a) The Contracting Officer may at any time, by written order, and without notice to...

Fixed-site physical protection system modeling

International Nuclear Information System (INIS)

Chapman, L.D.

1975-01-01

An evaluation of a fixed-site safeguard security system must consider the interrelationships of barriers, alarms, on-site and off-site guards, and their effectiveness against a forcible adversary attack whose intention is to create an act of sabotage or theft. A computer model has been developed at Sandia Laboratories for the evaluation of alternative fixed-site security systems. Trade-offs involving on-site and off-site response forces and response times, perimeter alarm systems, barrier configurations, and varying levels of threat can be analyzed. The computer model provides a framework for performing inexpensive experiments on fixed-site security systems for testing alternative decisions, and for determining the relative cost effectiveness associated with these decision policies

The 1994 Fermilab Fixed Target Program

International Nuclear Information System (INIS)

Conrad, J.

1994-11-01

This paper highlights the results of the Fermilab Fixed Target Program that were announced between October, 1993 and October, 1994. These results are drawn from 18 experiments that took data in the 1985, 1987 and 1990/91 fixed target running periods. For this discussion, the Fermilab Fixed Target Program is divided into 5 major topics: hadron structure, precision electroweak measurements, heavy quark production, polarization and magnetic moments, and searches for new phenomena. However, it should be noted that most experiments span several subtopics. Also, measurements within each subtopic often affect the results in other subtopics. For example, parton distributions from hadron structure measurements are used in the studies of heavy quark production

Charm and beauty measurements at Fermilab fixed target

International Nuclear Information System (INIS)

Mishra, C.S.

1993-10-01

Eighteen months after a successful run of the Fermilab fixed target program, interesting results from several experiments are available. This is the first time that more than one Fermilab fixed target experiment has reported the observation of beauty mesons. In this paper we review recent results from charm and beauty fixed target experiments at Fermilab

Floating-to-Fixed-Point Conversion for Digital Signal Processors

Directory of Open Access Journals (Sweden)

Menard Daniel

2006-01-01

Full Text Available Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

Floating-to-Fixed-Point Conversion for Digital Signal Processors

Science.gov (United States)

Menard, Daniel; Chillet, Daniel; Sentieys, Olivier

2006-12-01

Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

Robustness of regularities for energy centroids in the presence of random interactions

International Nuclear Information System (INIS)

Zhao, Y.M.; Arima, A.; Yoshida, N.; Ogawa, K.; Yoshinaga, N.; Kota, V. K. B.

2005-01-01

In this paper we study energy centroids such as those with fixed spin and isospin and those with fixed irreducible representations for both bosons and fermions, in the presence of random two-body and/or three-body interactions. Our results show that regularities of energy centroids of fixed-spin states reported in earlier works are very robust in these more complicated cases. We suggest that these behaviors might be intrinsic features of quantum many-body systems interacting by random forces

Preparation of carrier-free radioactive thallium for medical use

International Nuclear Information System (INIS)

Comar, D.; Crouzel, C.

1975-01-01

Radioactive thallium for medical use have been prepared by proton or deuteron bombardment of HgO or metallic Hg. The carrier free thallium is separated from mercury by ether extraction of the chloride. The yield of production for the isotopes 198m to 202 is given for different energies of protons and deuterons. The irradiated substances consisted of red mercury oxide containing less than 1 ppm iron, and high-purity (99.999%) metallic mercury. The red mercury oxide targets were irradiated with 15 MeV deuterons (M.R.C. cyclotron, Hammersmith Hospital-London and Saclay Van de Graff tandem) or 50 and 14 MeV protons (Grenoble Nuclear Physics Institute cyclotron and S.H.F.J. compact cyclotrons). The metallic mercury target was irradiated with 14, 16 and 20 MeV protons (S.H.F.J. compact cyclotron and Saclay variable-energy cyclotron). The particle current never exceeded 10 μA for irradiation times between 15 minutes and a few hours. (F.Gy.)

Charm and beauty measurements at Fermilab fixed target

International Nuclear Information System (INIS)

Mishra, C.S.

1993-01-01

Eighteen months after a successful run of the Fermilab fixed target program, interesting results from several experiments are available. This is the first time that more than one Fermilab fixed target experiment has reported the observation of beauty mesons. In this paper the author reviews recent results from charm and beauty fixed target experiments at Fermilab

Diogene: A 4π detector, based on a time projection chamber, for studying central collisions of relativistic heavy ions

International Nuclear Information System (INIS)

Gosset, J.

1981-01-01

'Diogene' is the name we have chosen for a 4π solid angle detector, based on a Time Projection Chamber, designed to perform exclusive measurements of charged particles emitted in central collisions or relativistic heavy ions. This detector is being developed by a collaboration between physicists from Saclay, Strasbourg and Clermont Ferrand, to be installed at the Saturne Synchrotron in Saclay. I first give the motivations for our choice of a TPC rather than any other kind of detector, then I recall the principle of such a detector, before describing it with more detail and describing its present status and forsean capabilities, including some discussion about the possible extension of such a detector towards higher energies and/or heavier beams. (orig.)

Diogene: a 4π detector, based on a time projection chamber, for studying central collisions of relativistic heavy ions

International Nuclear Information System (INIS)

Gosset, J.

1980-10-01

'Diogene' is the name we have chosen for a 4π solid angle detector, based on a Time Projection Chamber (TPC), designed to perform exclusive measurements of charged particles emitted in central collisions or relativistic heavy ions This detector is being developed by a collaboration between physicists from Saclay, Strasbourg and Clermont-Ferrand, to be installed at the Saturne Synchrotron in Saclay. I shall first give the motivations for our choice of a TPC rather than any other kind of detector, than recall the principle of such a detector, before describing it with more detail and describing its present status and forsean capabilities, including some discussion about the possible extension of such a detector towards higher energies and/or heavier beams

About Applications of the Fixed Point Theory

Directory of Open Access Journals (Sweden)

Bucur Amelia

2017-06-01

Full Text Available The fixed point theory is essential to various theoretical and applied fields, such as variational and linear inequalities, the approximation theory, nonlinear analysis, integral and differential equations and inclusions, the dynamic systems theory, mathematics of fractals, mathematical economics (game theory, equilibrium problems, and optimisation problems and mathematical modelling. This paper presents a few benchmarks regarding the applications of the fixed point theory. This paper also debates if the results of the fixed point theory can be applied to the mathematical modelling of quality.

Hybrid fixed point in CAT(0 spaces

Directory of Open Access Journals (Sweden)

Hemant Kumar Pathak

2018-02-01

Full Text Available In this paper, we introduce an ultrapower approach to prove fixed point theorems for $H^{+}$-nonexpansive multi-valued mappings in the setting of CAT(0 spaces and prove several hybrid fixed point results in CAT(0 spaces for families of single-valued nonexpansive or quasinonexpansive mappings and multi-valued upper semicontinuous, almost lower semicontinuous or $H^{+}$-nonexpansive mappings which are weakly commuting. We also establish a result about structure of the set of fixed points of $H^{+}$-quasinonexpansive mapping on a CAT(0 space.

Contamination effects on fixed-bias Langmuir probes

Energy Technology Data Exchange (ETDEWEB)

Steigies, C. T. [Institut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel, 24098 Kiel (Germany); Barjatya, A. [Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, Florida 32114 (United States)

2012-11-15

Langmuir probes are standard instruments for plasma density measurements on many sounding rockets. These probes can be operated in swept-bias as well as in fixed-bias modes. In swept-bias Langmuir probes, contamination effects are frequently visible as a hysteresis between consecutive up and down voltage ramps. This hysteresis, if not corrected, leads to poorly determined plasma densities and temperatures. With a properly chosen sweep function, the contamination parameters can be determined from the measurements and correct plasma parameters can then be determined. In this paper, we study the contamination effects on fixed-bias Langmuir probes, where no hysteresis type effect is seen in the data. Even though the contamination is not evident from the measurements, it does affect the plasma density fluctuation spectrum as measured by the fixed-bias Langmuir probe. We model the contamination as a simple resistor-capacitor circuit between the probe surface and the plasma. We find that measurements of small scale plasma fluctuations (meter to sub-meter scale) along a rocket trajectory are not affected, but the measured amplitude of large scale plasma density variation (tens of meters or larger) is attenuated. From the model calculations, we determine amplitude and cross-over frequency of the contamination effect on fixed-bias probes for different contamination parameters. The model results also show that a fixed bias probe operating in the ion-saturation region is affected less by contamination as compared to a fixed bias probe operating in the electron saturation region.

Sustainability and the Fixed Bed Nuclear Reactor (FBNR

Directory of Open Access Journals (Sweden)

Farhang Sefidvash

2012-08-01

Full Text Available Sustainability as a multifaceted and holistic concept is analyzed. Sustainability involves human relationship with elements such as natural environment, economy, power, governance, education and technology with the ultimate purpose of carrying forward an ever-advancing civilization. The Fixed Bed Nuclear Reactor (FBNR is an innovative, small, simple in design, inherently safe, non-proliferating, and environmentally friendly concept that its deployment can generate energy in a sustainable manner contributing to the prosperity of humanity. The development of FBNR will provide electricity as well as desalinated water through a simple but advanced technology for the developing, as well as developed countries. FBNR is environmentally friendly due to its inherent safety and the convenience of using its spent fuel as the source of radiation for irradiation purposes in agriculture, industry, and medicine. Politically, if a ping pong game brought peace between China and USA, a program of development of FBNR supported by the peace loving international community can become a more mature means to bring peace among certain apparently hostile nations who crave sustainable energy, desalinated water and simple advanced technology.

Current experiments in elementary particle physics

Energy Technology Data Exchange (ETDEWEB)

Wohl, C.G.; Armstrong, F.E.; Trippe, T.G.; Yost, G.P. (Lawrence Berkeley Lab., CA (USA)); Oyanagi, Y. (Tsukuba Univ., Ibaraki (Japan)); Dodder, D.C. (Los Alamos National Lab., NM (USA)); Ryabov, Yu.G.; Slabospitsky, S.R. (Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Serpukhov (USSR). Inst. Fiziki Vysokikh Ehnergij); Frosch, R. (Swiss Inst. for Nuclear Research, Villigen (Switzerla

1989-09-01

This report contains summaries of 736 current and recent experiments in elementary particle physics (experiments that finished taking data before 1982 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, Joint Institute for Nuclear Research (Dubna), KEK, LAMPF, Novosibirsk, PSI/SIN, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground experiments. Also given are instructions for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized.

Current experiments in elementary particle physics

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Trippe, T.G.; Yost, G.P.; Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Slabospitsky, S.R.; Olin, A.; Klumov, I.A.

1989-09-01

This report contains summaries of 736 current and recent experiments in elementary particle physics (experiments that finished taking data before 1982 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, Joint Institute for Nuclear Research (Dubna), KEK, LAMPF, Novosibirsk, PSI/SIN, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground experiments. Also given are instructions for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized

Measurement of the deuteron tensor polarization at the sup 3 He->d+p vertex up to internal momenta of 0.43 GeV/c

CERN Document Server

Sitnik, I M; Tomasi-Gustafsson, E; Azhgirey, L S; Ball, J; Bimbot, L; Bisson, Y; Boivin, M; Borzunov, Yu T; Boyard, J L; Courtat, P; Gacougnolle, R; Garçon, M; Golovanov, L B; Hennino, T; Jones, M; Kirillov, D A; Kunne, Ronald Alexander; Malinina, L V; Nedev, S; Piskunov, N M; Punjabi, V; Rekalo, M P; Sans, J L; Skowron, R; Strokovsky, E A; Yonnet, J

2000-01-01

The tensor polarization of deuterons, rho sub 2 sub 0 , emitted at zero degree in the sup 1 H( sup 3 He, d-reversible)X reaction, was measured at the Saturne National Laboratory in Saclay, using the SPES4 magnetic channel and the HYPOM polarimeter. The momentum of the detected deuterons was kept fixed at 3.77 GeV/c, while the momentum of the sup 3 He beam was varied from 5.66 to 4.60 GeV/c; this provided a range of internal momenta of a deuteron in sup 3 He, k, from 0 to 0.43 GeV/c.

Radiation control around the proton synchrotron Saturne (1962)

International Nuclear Information System (INIS)

Joffre, H.; Lamberieux, J.; Stirling, A.

1962-01-01

After giving the main characteristics of the Synchrotron at Saclay, the authors present on the one hand the general arrangements made for ensuring the safety of the personnel: specification of radiation levels, automatic devices, visual indications, etc... and on the other hand, the means employed for radiation detection. These detection methods include fixed γ and fast neutron detectors whose indications are centralised on a radiation control panel, and mobile detectors for specific or more precise measurements. The authors give results of radiation level measurements and some results of the diminishing of radiation intensity by wood, concrete and water. (author) [fr

A fixed-point theorem for holomorphic maps

OpenAIRE

TIMONEY, RICHARD

1994-01-01

PUBLISHED We consider the action on the maximal ideal space M of the algebra H of bounded analytic functions, induced by an analytic self?map of a complex manifold, X. After some general preliminaries, we focus on the question of the existence of fixed points for this action, in the case when X is the open unit disk, D. We classify the fixed?point?free M?obius transformations, and we show that for an arbitrary analytic map from D into itself, the induced map has a fixed poin...

A Novel Coordinated Control of Renewable Energy Sources and Energy Storage System in Islanded Microgrid

DEFF Research Database (Denmark)

Gui, Yonghao; Li, Mingshen; Guerrero, Josep M.

2018-01-01

A novel coordinated control for energy storage system (ESS) and renewable energy source (RES) units is proposed in islanded AC microgrids without a phase-locked loop system. We use a proportional-resonant control technique for the ESS, which fixes the voltage and frequency of the microgrid...

Gaining Insight into an Organization's Fixed Assets.

Science.gov (United States)

Hardy, Elisabet

2003-01-01

Discusses issues related to school district implementation of June 2001 Government Accounting Standards Board (GASB) Statement 34 designed to change how schools report fixed assets. Includes planning for GASB implementation, conducting fixed-asset inventories, and making time for GASB reporting. (PKP)

Donation return time at fixed and mobile donation sites

Science.gov (United States)

Carey, Patricia M.; High, Patrick M.; Schlumpf, Karen S.; Johnson, Bryce R.; Mast, Alan E.; Rios, Jorge A.; Simon, Toby L.; Wilkinson, Susan L.

2013-01-01

BACKGROUND This study investigated the effect of blood donation environment, fixed or mobile with differing sponsor types, on donation return time. STUDY DESIGN AND METHODS Data from 2006 through 2009 at six US blood centers participating in the Retrovirus Epidemiology Donor Study-II (REDS-II) were used for analysis. Descriptive statistics stratified by whole blood (WB), plateletpheresis (PP), and double red blood cell (R2) donations were obtained for fixed and mobile locations, including median number of donations and median interdonation interval. A survival analysis estimated median return time at fixed and mobile sites, while controlling for censored return times, demographics, blood center, and mandatory recovery times. RESULTS Two-thirds (67.9%) of WB donations were made at mobile sites, 97.4% of PP donations were made at fixed sites, and R2 donations were equally distributed between fixed and mobile locations. For donations at fixed sites only or alternating between fixed and mobile sites, the highest median numbers of donations were nine and eight, respectively, and the shortest model-adjusted median return times (controlling for mandatory eligibility times of 56 and 112 days) were 36 and 30 days for WB and R2 donations, respectively. For PP donations, the shortest model-adjusted median return time was 23 days at a fixed location and the longest was 693 days at community locations. CONCLUSION WB, PP, and R2 donors with the shortest time between donations were associated with fixed locations and those alternating between fixed and mobile locations, even after controlling for differing mandatory recovery times for the different blood donation procedures. PMID:21745215

Investments in fixed assets and depreciation of fixed assets: theoretical and practical aspects of study and analysis

Directory of Open Access Journals (Sweden)

Irina D. Demina

2017-01-01

Full Text Available It is indicated that domestic economy is experiencing a shortage of investment.The acceleration of the processes of import substitution is one of the most important challenges facing the domestic economy at present.Investments, especially capital investments and related investment relations constitute the basis for the development of the national economy and improving the efficiency of social production as a whole. A problem of formation of the amortization fundremains actual at the moment. In the modern scientific and educational literature amortization fund means the fund, including the use of funds to complete the restoration and repair of the fixed assets. This paper makesthe analysis of the situation in the area of investment in the fixed capital, which has developed in Russia for the past severalyears. The aim of this paper is to study the investment climate in the country based on the analysis of investments in the fixed capital by the sources of financing and types of the economic activity. The work is based on dynamic and structural analysis of analytical and statistical information on the processes occurring in this field.As a result, it can be noted that in spite of a number of efforts being made, in general, there are low growth rates in industry, there is a deficit of investments in the fixed assets. Most of the investments in fixed assets are carried out at the expense of the organizations’ own funds. A significant number of economic entities do not have the means, necessary for the technological renewal. Unfortunately, the regulatory framework in the field of accounting for the fixed assets and accrual of depreciation does not imply the use of a special account for the accumulation, and, most importantly, for the purposeful control of the use of the depreciation fund.First of all, it is necessary for companies with state participation and monopoly organizations. The lack of control over the targeted use of the depreciation fund

Tariffs and Firm-Level Heterogeneous Fixed Export Costs

DEFF Research Database (Denmark)

Schröder, Philipp J.H.; Jørgensen, Jan Guldager

2006-01-01

This paper presents a two country intra-industry trade model with bilateral ad valorem tariffs and fixed export costs that are heterogeneous across firms. In this model not all firms will choose to export. We examine the effects of reciprocal changes in the tariff and the fixed export barrier...... on the number of firms, firm profits, tariff revenue and consumer welfare. We show that both types of trade barriers reduce (increase) the number of exporting (pure domestic) firms. However, the sum of available home and foreign varieties may actually increase for small tariffs. Firm profits fall for both...... the tariff and the fixed export barrier. Tariff revenue falls for an increase in fixed exporting costs whereas we have a Laffer curve effect for the tariff. Finally, we establish that welfare falls with fixed export costs and large tariffs but increases for small tariffs, i.e. there exist a welfare...

Apparatus for fixing radioactive waste

International Nuclear Information System (INIS)

Murphy, J.D.; Pirro, J. Jr.; Lawrence, M.; Wisla, S.F.

1975-01-01

Fixing radioactive waste is disclosed in which the waste is collected as a slurry in aqueous media in a metering tank located within the nuclear facilities. Collection of waste is continued from time to time until a sufficient quantity of material to make up a full shipment to a burial ground has been collected. The slurry is then cast in shipping containers for shipment to a burial ground or the like by metering through a mixer into which fixing materials are simultaneously metered at a rate to yield the desired proportions of materials. (U.S.)

Near-Bed Turbulent Kinetic Energy Budget Under a Large-Scale Plunging Breaking Wave Over a Fixed Bar

Science.gov (United States)

van der Zanden, Joep; van der A, Dominic A.; Cáceres, Iván.; Hurther, David; McLelland, Stuart J.; Ribberink, Jan S.; O'Donoghue, Tom

2018-02-01

Hydrodynamics under regular plunging breaking waves over a fixed breaker bar were studied in a large-scale wave flume. A previous paper reported on the outer flow hydrodynamics; the present paper focuses on the turbulence dynamics near the bed (up to 0.10 m from the bed). Velocities were measured with high spatial and temporal resolution using a two component laser Doppler anemometer. The results show that even at close distance from the bed (1 mm), the turbulent kinetic energy (TKE) increases by a factor five between the shoaling, and breaking regions because of invasion of wave breaking turbulence. The sign and phase behavior of the time-dependent Reynolds shear stresses at elevations up to approximately 0.02 m from the bed (roughly twice the elevation of the boundary layer overshoot) are mainly controlled by local bed-shear-generated turbulence, but at higher elevations Reynolds stresses are controlled by wave breaking turbulence. The measurements are subsequently analyzed to investigate the TKE budget at wave-averaged and intrawave time scales. Horizontal and vertical turbulence advection, production, and dissipation are the major terms. A two-dimensional wave-averaged circulation drives advection of wave breaking turbulence through the near-bed layer, resulting in a net downward influx in the bar trough region, followed by seaward advection along the bar's shoreward slope, and an upward outflux above the bar crest. The strongly nonuniform flow across the bar combined with the presence of anisotropic turbulence enhances turbulent production rates near the bed.

Nonthermal fixed points and the functional renormalization group

International Nuclear Information System (INIS)

Berges, Juergen; Hoffmeister, Gabriele

2009-01-01

Nonthermal fixed points represent basic properties of quantum field theories, in addition to vacuum or thermal equilibrium fixed points. The functional renormalization group on a closed real-time path provides a common framework for their description. For the example of an O(N) symmetric scalar theory it reveals a hierarchy of fixed point solutions, with increasing complexity from vacuum and thermal equilibrium to nonequilibrium

Topological fixed point theory of multivalued mappings

CERN Document Server

Górniewicz, Lech

1999-01-01

This volume presents a broad introduction to the topological fixed point theory of multivalued (set-valued) mappings, treating both classical concepts as well as modern techniques. A variety of up-to-date results is described within a unified framework. Topics covered include the basic theory of set-valued mappings with both convex and nonconvex values, approximation and homological methods in the fixed point theory together with a thorough discussion of various index theories for mappings with a topologically complex structure of values, applications to many fields of mathematics, mathematical economics and related subjects, and the fixed point approach to the theory of ordinary differential inclusions. The work emphasises the topological aspect of the theory, and gives special attention to the Lefschetz and Nielsen fixed point theory for acyclic valued mappings with diverse compactness assumptions via graph approximation and the homological approach. Audience: This work will be of interest to researchers an...

Fixed target facility at the SSC

Energy Technology Data Exchange (ETDEWEB)

Loken, S.C.; Morfin, J.G.

1985-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group led by E. Colton whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required. 13 references, 5 figures.

Fixed target facility at the SSC

International Nuclear Information System (INIS)

Loken, S.C.; Morfin, J.G.

1985-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group led by E. Colton whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required. 13 references, 5 figures

Generalizing the classical fixed-centres problem in a non-Hamiltonian way

International Nuclear Information System (INIS)

Albouy, A; Stuchi, T J

2004-01-01

The problem of two gravitational (or Coulombian) fixed centres is a classical integrable problem, stated and integrated by Euler in 1760. The integrability is due to the unexpected first integral G. We introduce some straightforward generalizations of the problem that still have the generalization of G as a first integral, but do not possess the energy integral. We present some numerical integrations showing the main features of their dynamics. In the domain of bounded orbits the behaviour of these a priori non-Hamiltonian systems is very similar to the behaviour of usual near-integrable systems

Renormalization Scale-Fixing for Complex Scattering Amplitudes

Energy Technology Data Exchange (ETDEWEB)

Brodsky, Stanley J.; /SLAC; Llanes-Estrada, Felipe J.; /Madrid U.

2005-12-21

We show how to fix the renormalization scale for hard-scattering exclusive processes such as deeply virtual meson electroproduction by applying the BLM prescription to the imaginary part of the scattering amplitude and employing a fixed-t dispersion relation to obtain the scale-fixed real part. In this way we resolve the ambiguity in BLM renormalization scale-setting for complex scattering amplitudes. We illustrate this by computing the H generalized parton distribution at leading twist in an analytic quark-diquark model for the parton-proton scattering amplitude which can incorporate Regge exchange contributions characteristic of the deep inelastic structure functions.

Fixed-Time Stability of the Hydraulic Turbine Governing System

Directory of Open Access Journals (Sweden)

Caoyuan Ma

2018-01-01

Full Text Available This paper studies the problem of fixed-time stability of hydraulic turbine governing system with the elastic water hammer nonlinear model. To control and improve the quality of hydraulic turbine governing system, a new fixed-time control strategy is proposed, which can stabilize the water turbine governing system within a fixed time. Compared with the finite-time control strategy where the convergence rate depends on the initial state, the settling time of the fixed-time control scheme can be adjusted to the required value regardless of the initial conditions. Finally, we numerically show that the fixed-time control is more effective than and superior to the finite-time control.

Tariffing of energy measured consumers in the distribution network

International Nuclear Information System (INIS)

2006-01-01

Criteria for socio-economic effective tariffing of energy-measured clients in the distribution network are discussed (i.e. households, leisure homes and smaller business clients), this means consumers that do not have hourly measurements or effect measurements. The tariffs should be based on variable segments that reflect short-term marginal costs in the network (in practice loss of transfer) and fixed segments that to the least extent possible influence the consumers' decisions in the choice of energy solutions, both in short term and long term. High-priced energy segments and effect based fixed segments may give unfortunate socio-economic price signals compared to the marginal long-term network costs. A fixed segment per measurement unit is in principle completely neutral, but it is to some extent vulnerable to strategic adjustments if the consumers choose collective measurement. This is not necessarily a big problem in practice (author)

How to estimate realistic energy savings in Energy Performance Certificates

DEFF Research Database (Denmark)

Wittchen, Kim Bjarne; Altmann, Nagmeh; Berecová, Monika

Given the fact that most MS use fixed or other kinds of default values as boundary condition input for energy performance calculations, it is not surprising that the calculated energy performance differs from the measured energy consumption. As a consequence, the calculated energy savings due...... stationary calculation tools using monthly average values. The optimum solution for energy performance certificates and calculating realistic energy savings is to have two calculations. One calculation, using default values to calculate the label itself, and one with actual input parameters for calculating...... energy performance before and after implementing energy saving measures. Actual values though, may be difficult to identify, so there is a need to make adaptations to reality easy. Even if actual values are available, there are still issues that cause calculated energy savings to differ from the obtained...

First charged current data from the CERN-Dortmund-Heidelberg-Saclay neutrino experiment

International Nuclear Information System (INIS)

Kleinknecht, K.

1977-01-01

The CDHS Collaboration has analyzed data taken in the CERN narrow-band antineutrino and neutrino beams. From 12000 antineutrino and 36000 neutrino charged current events at neutrino energies between 30 GeV and 200 GeV, we obtain the average inelasticity and the cross-section ratio sigma antisub(ν)/sigmasub(ν) as a function of neutrino energy. On the basis of these data we cannot confirm the high y anomaly observed by previous experiments at Fermilab. Instead, the measured average inelasticity in anti neutrino reactions and the ratio of charged current total cross-sections sigma anti sub(ν)/sigma%sub(ν) are compatible with no energy variation within their errors in the energy range 30 + . (orig.) [de

Fractal Structures For Fixed Mems Capacitors

KAUST Repository

Elshurafa, Amro M.

2014-08-28

An embodiment of a fractal fixed capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure. The capacitor body has a first plate with a fractal shape separated by a horizontal distance from a second plate with a fractal shape. The first plate and the second plate are within the same plane. Such a fractal fixed capacitor further comprises a substrate above which the capacitor body is positioned.

Fractal Structures For Fixed Mems Capacitors

KAUST Repository

Elshurafa, Amro M.; Radwan, Ahmed Gomaa Ahmed; Emira, Ahmed A.; Salama, Khaled N.

2014-01-01

An embodiment of a fractal fixed capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure. The capacitor body has a first plate with a fractal shape separated by a horizontal distance from a second plate with a fractal shape. The first plate and the second plate are within the same plane. Such a fractal fixed capacitor further comprises a substrate above which the capacitor body is positioned.

Action Investment Energy Games

DEFF Research Database (Denmark)

Larsen, Kim Guldstrand; Laursen, Simon; Srba, Jiri

2012-01-01

We introduce the formalism of action investment energy games where we study the trade-off between investments limited by given budgets and resource constrained (energy) behavior of the underlying system. More specifically, we consider energy games extended with costs of enabling actions and fixed...... budgets for each player. We ask the question whether for any Player 2 investment there exists a Player 1 investment such that Player 1 wins the resulting energy game. We study the action investment energy game for energy intervals with both upper and lower bounds, and with a lower bound only, and give...

48 CFR 1852.216-74 - Estimated cost and fixed fee.

Science.gov (United States)

2010-10-01

... and Clauses 1852.216-74 Estimated cost and fixed fee. As prescribed in 1816.307-70(b), insert the following clause: Estimated Cost and Fixed Fee (DEC 1991) The estimated cost of this contract is ______ exclusive of the fixed fee of ______. The total estimated cost and fixed fee is ______. (End of clause) [62...

48 CFR 36.207 - Pricing fixed-price construction contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Pricing fixed-price... Contracting for Construction 36.207 Pricing fixed-price construction contracts. (a) Generally, firm-fixed... methods. (b) Lump-sum pricing shall be used in preference to unit pricing except when— (1) Large...

HEALTH INSURANCE: FIXED CONTRIBUTION AND REIMBURSEMENT MAXIMA

CERN Document Server

Human Resources Division

2001-01-01

Affected by the salary adjustments on 1 January 2001 and the evolution of the staff members and fellows population, the average reference salary, which is used as an index for fixed contributions and reimbursement maxima, has changed significantly. An adjustment of the amounts of the reimbursement maxima and the fixed contributions is therefore necessary, as from 1 January 2001. Reimbursement maxima The revised reimbursement maxima will appear on the leaflet summarizing the benefits for the year 2001, which will be sent out with the forthcoming issue of the CHIS Bull'. This leaflet will also be available from the divisional secretariats and from the UNIQA office at CERN. Fixed contributions The fixed contributions, applicable to some categories of voluntarily insured persons, are set as follows (amounts in CHF for monthly contributions) : voluntarily insured member of the personnel, with normal health insurance cover : 910.- (was 815.- in 2000) voluntarily insured member of the personnel, with reduced heal...

Fix og færdig

Directory of Open Access Journals (Sweden)

Jens Pedersen

2012-12-01

Full Text Available Fix & Finish “WHO CAN FIX IT?” is an investigation of the needles left behind by drug users in Copenhagen’s Vesterbro district. Based on the praxiological methods developed by Annemarie Mol as well as processes of objectification as described by Daniel Miller, the used needle appears to be a multiple object that is related to opportunities, fear, good intentions and trash. This article is an invitation to study material culture and material practices as a part of semiotic and discursive analyses in order to sharpen a researcher’s analytical focus while remaining grounded in reality.

Development of a scheffler fixed focus concentrator for the processing of medicinal plants and fruits

International Nuclear Information System (INIS)

Munir, A.; Hensel, O.

2011-01-01

With the increasing population and industrialization, there is need to cut down the load of fossil fuels and to reduce environmental pollution. A large part of industrial process heat lies from low to medium temperature range which can be supplied by solar energy. Scheffler fixed focus concentrators are successfully used for medium temperature applications in different parts of the world. These concentrators are taken as lateral sections of paraboloids and provide fixed focus away from the path of incident beam radiations throughout the year. The paper presents description and experimental results of medicinal and fruit processing using an 8 m/sup 2/ surface area Scheffler solar concentrator installed at solar campus, university of Kassel, Witzenhausen Germany. The research was focused to promote solar renewable energy in rural and remote locations. The solar system was equipped with Pyranometer and thermocouples to evaluate real time data which was used for performance evaluation of the solar system during processing of different products. In the first phase of the research, several trials were made to evaluate the performance of the system. Within the solar radiations range of 700- 800 W m-2, the receiver temperatures were recorded between 300 - 400 deg. C. The average power was found to be 1.55 kW and system efficiency was found to be 32.34%. Different medicinal plants like Melissa, Peppermint, Rosemary, Cumin, and Cloves buds were successfully processed by using solar energy. Different fruit and vegetables like Apples, Plums, cherries, tomatoes were also processed by using solar energy. Research results have showed that solar energy can be successfully used for the post harvest and fruit processing at rural location. (author)

Determinants of private fixed investment in emerging country

Directory of Open Access Journals (Sweden)

Goitsemodimo Abel Molocwa

2018-03-01

Full Text Available The neoclassical and Keynesian theories regard private investment not only as a source of economic growth but also as a determinant of the potential extent of the national income. The aim of this research was to examine the determinants of private fixed investment in South Africa by employing the Johansen cointegration technique and the vector error correction model (VECM analysis. Based on the literature survey it appears that the previous studies mainly focused on private investment in manufacturing and infrastructure sectors therefore this is envisaged to add knowledge to a body of economics literature in this area by focusing more on private fixed investment and its determinants in South Africa. The study concludes that for the period under investigation GDP has the positive sign as expected. This suggests that in the long run it impact positively on private fixed investment. The findings of the study also confirmed that tax rate is a complementary to private fixed investment. Similarly, the real exchange rate coefficient was negative as expected which suggests that the depreciation of the currency stimulates the growth of South Africa private fixed investment. It is obvious that even the best economic model cannot achieve the expected outcomes immediately but these results encourage the study to believe that the South African monetary policy on exchange rate complements private fixed investment. Therefore, the study proposes that both even though both growth and general tax rate are difficult to accomplish simultaneously, they should be used to promote the flow of private fixed investment in South Africa.

48 CFR 236.271 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Cost-plus-fixed-fee... CONTRACTS Special Aspects of Contracting for Construction 236.271 Cost-plus-fixed-fee contracts. Annual military construction appropriations acts restrict the use of cost-plus-fixed-fee contracts (see 216.306(c...

29 CFR 1910.161 - Fixed extinguishing systems, dry chemical.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Fixed extinguishing systems, dry chemical. 1910.161 Section... § 1910.161 Fixed extinguishing systems, dry chemical. (a) Scope and application. This section applies to all fixed extinguishing systems, using dry chemical as the extinguishing agent, installed to meet a...

48 CFR 229.402-1 - Foreign fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Foreign fixed-price... Foreign fixed-price contracts. Use the clause at 252.229-7000, Invoices Exclusive of Taxes or Duties, in solicitations and contracts when a fixed-price contract will be awarded to a foreign concern. ...

49 CFR 587.18 - Dimensions of fixed rigid barrier.

Science.gov (United States)

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.18 Dimensions of fixed rigid barrier. (a) The fixed rigid barrier has a mass of not... 49 Transportation 7 2010-10-01 2010-10-01 false Dimensions of fixed rigid barrier. 587.18 Section...

Fixed export costs and multi-product firms

NARCIS (Netherlands)

Creusen, H.; Smeets, R.

2011-01-01

This paper has two aims. First, we uncover some salient components of fixed export costs, which play a crucial role in recent heterogeneous firms models of international trade. Second, we investigate whether the importance of these fixed export costs varies with the size of a firms export product

Fixed export cost heterogeneity, trade and welfare

DEFF Research Database (Denmark)

Jørgensen, Jan Guldager; Schröder, Philipp J.H.

2008-01-01

-country intra-industry trade model where firms are of two different marginal costs types and where fixed export costs are heterogeneous across firms. This model traces many of the stylized facts of international trade. However, we find that with heterogeneous fixed export costs there exists a positive bilateral...

Mounting power cables on SOLEIL

CERN Multimedia

Laurent Guiraud

1999-01-01

The power couplers are mounted on the SOLEIL cryomodule in a clean room. The cryomodule will allow superconducting technology to be used at SOLEIL, the French national synchrotron facility. This work is carried out as part of a collaboration between CERN and CEA Saclay, the French National Atomic Energy Commission.

Nuclear: a blissful insecurity

International Nuclear Information System (INIS)

Moreau, A.

2003-01-01

The author used to work during more than 30 years at the Cea Saclay in the nuclear research. This book is an analysis of the anxieties generated by the Nuclear energy, the fundamental questions on our life style and the way that we give to our life. (A.L.B.)

Electron interactions with nuclei: Progress report

International Nuclear Information System (INIS)

1988-08-01

This paper contains information on the following topics: inclusive electron scattering; electroexcitation of Δ in nuclei; longitudinal and transverse response in the quasi-elastic region; electron scattering at MIT-Bates; detector development at LEGS; electron scattering at Saclay; intermediate energy nuclear interactions; research and development at CEBAF; and computing facilities

The Rapid Cycling Synchrotron of the EURISOL Beta-Beam facility

CERN Document Server

Lachaize, A

During the last two years, several upgrades of the initial baseline scenario were studied with the aim of increasing the average intensity of ion beams in the accelerator chain of the Beta Beam complex. This is the reason why the Rapid Cycling Synchrotron (RCS) specifications were reconsidered many times.General considerations on the optical design were presented at the Beta Beam Task Meetings held at CERN and at Saclay in 2005 (http://beta-beam.web.cern.ch/beta-beam/). More detailed beam optics studies were performed during the next months. Lattices, RF system parameters, multi-turn injection scheme, fast extraction, closed orbit correction and chromaticity correction systems were proposed for different versions of the RCS.Finally, the RCS specifications have stabilized in November 2006 after the fourth Beta Beam Task Meeting when it was decided to fix the maximum magnetic rigidity of ion beams to 14.47 T.m (3.5 GeV equivalent proton energy) and to adopt a ring physical radius of 40 m in order to facilitat...

The importance of fixed costs in animal health systems.

Science.gov (United States)

Tisdell, C A; Adamson, D

2017-04-01

In this paper, the authors detail the structure and optimal management of health systems as influenced by the presence and level of fixed costs. Unlike variable costs, fixed costs cannot be altered, and are thus independent of the level of veterinary activity in the short run. Their importance is illustrated by using both single-period and multi-period models. It is shown that multi-stage veterinary decision-making can often be envisaged as a sequence of fixed-cost problems. In general, it becomes clear that, the higher the fixed costs, the greater the net benefit of veterinary activity must be, if such activity is to be economic. The authors also assess the extent to which it pays to reduce fixed costs and to try to compensate for this by increasing variable costs. Fixed costs have major implications for the industrial structure of the animal health products industry and for the structure of the private veterinary services industry. In the former, they favour market concentration and specialisation in the supply of products. In the latter, they foster increased specialisation. While cooperation by individual farmers may help to reduce their individual fixed costs, the organisational difficulties and costs involved in achieving this cooperation can be formidable. In such cases, the only solution is government provision of veterinary services. Moreover, international cooperation may be called for. Fixed costs also influence the nature of the provision of veterinary education.

Energy-energy correlation in electron-positron annihilation at NNLL + NNLO accuracy

Energy Technology Data Exchange (ETDEWEB)

Tulipant, Zoltan; Kardos, Adam; Somogyi, Gabor [University of Debrecen, MTA-DE Particle Physics Research Group, Debrecen (Hungary)

2017-11-15

We present the computation of energy-energy correlation in e{sup +}e{sup -} collisions in the back-to-back region at next-to-next-to-leading logarithmic accuracy matched with the next-to-next-to-leading order perturbative prediction. We study the effect of the fixed higher-order corrections in a comparison of our results to LEP and SLC data. The next-to-next-to-leading order correction has a sizable impact on the extracted value of α{sub S}(M{sub Z}), hence its inclusion is mandatory for a precise measurement of the strong coupling using energy-energy correlation. (orig.)

Energy-energy correlation in electron-positron annihilation at NNLL + NNLO accuracy

Science.gov (United States)

Tulipánt, Zoltán; Kardos, Adam; Somogyi, Gábor

2017-11-01

We present the computation of energy-energy correlation in e^+e^- collisions in the back-to-back region at next-to-next-to-leading logarithmic accuracy matched with the next-to-next-to-leading order perturbative prediction. We study the effect of the fixed higher-order corrections in a comparison of our results to LEP and SLC data. The next-to-next-to-leading order correction has a sizable impact on the extracted value of α S(M_Z), hence its inclusion is mandatory for a precise measurement of the strong coupling using energy-energy correlation.

Fixed automated spray technology.

Science.gov (United States)

2011-04-19

This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

Some Design Considerations on the Electrostatically Actuated Fixed-Fixed End Type MEMS Switches

International Nuclear Information System (INIS)

Sadeghian, Hamed; Rezazadeh, Ghader; Sani, Ebrahim Abbaspour

2006-01-01

The nonlinear electrostatic pull-in behaviour of MEMS Switches in micro-electromechanical systems (MEMS) is investigated in this article. We used the distributed model when the electrostatic pressure didn't apply at the whole of the beam and applied only in the mid-part of the beam. In this part the electrostatic area is different from two other parts. The model uses Euler-Bernoulli beam theory for fixed-fixed end type beams. The finite difference method was used to solve the nonlinear equation. The proposed model includes the fringing effects of the electrical field, residual stress and varying electrostatic area effects. The numerical results reveal that the profile deflection of the MEMS Switch may not only influence the distribution of the electrostatic force but also considerably change the nonlinear pull-in voltage

12 CFR 619.9170 - Fixed interest rate.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Fixed interest rate. 619.9170 Section 619.9170 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9170 Fixed interest rate. The rate of interest specified in the note or loan document which will prevail as the maximum...

48 CFR 16.306 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Cost-plus-fixed-fee...-fee contracts. (a) Description. A cost-plus-fixed-fee contract is a cost-reimbursement contract that.... The fixed fee does not vary with actual cost, but may be adjusted as a result of changes in the work...

The (e,e'p) reaction

International Nuclear Information System (INIS)

Mougey, J.

1979-01-01

Quasi-free scattering (e,e'p) experiments on light and medium nuclei performed at the Saclay 600 MeV Linear Accelerator are described. Interpretation of the measured spectral function in terms of single hole state momentum and energy distributions is discussed. A marked discrepancy with an energy weighted sum rule indicates the deviations from independant particle shell model and the need for a better theoretical description of the reaction

Simple kinetic theory model of reactive collisions. IV. Laboratory fixed orientational cross sections

International Nuclear Information System (INIS)

Evans, G.T.

1987-01-01

The differential orientational cross section, obtainable from molecular beam experiments on aligned molecules, is calculated using the line-of-normals model for reactive collisions involving hard convex bodies. By means of kinetic theory methods, the dependence of the cross section on the angle of attack γ 0 is expressed in a Legendre function expansion. Each of the Legendre expansion coefficients is given by an integral over the molecule-fixed cross section and functions of the orientation dependent threshold energy

Some aspects of the inverse problem of scattering at fixed energy

International Nuclear Information System (INIS)

Coudray, C.

1979-01-01

The first two chapters deal with the Newton-Sabatier method. Numerical tests are performed for real and complex potentials. They allow the study of the respective influences of energy, and of the internal parameters of the potential: its shape, depth and range. Within certain limits, good agreements are obtained. In particular, it is shown that they always require energies larger than a 'critical' energy, the dependence of which in function of the internal parameters of the potential being analyzed. Then the third chapter is devoted to transparent and quasi-transparent potentials in Born approximation. A class of such potentials is exhibited and studied. All of them oscillate, and their decrease at infinity may be chosen according to any arbitrary power of the variable. One of them is the Born approximation of the transparent potential of the Newton-Sabatier method. The last chapter concerns finite range complex potentials belonging to a well-defined class. For such potentials, a set of coherent inverse scattering date is given. The corresponding fundamental equation is written and shown to possess an unique solution [fr

Fixed Wireless may be a temporary answer

Indian Academy of Sciences (India)

Possible to enhance throughput by 4 with respect to Mobile Wireless. And get 8 to 10 bps / Hz / cell; Examples: BB corDECT: today provides 256/512kbps to each connection in fixed environment. Ideal for small town / rural Broadband. Fixed 802.16d/e does the same in but at much higher price-points.

Mixed quantum/classical theory of rotationally and vibrationally inelastic scattering in space-fixed and body-fixed reference frames.

Science.gov (United States)

Semenov, Alexander; Babikov, Dmitri

2013-11-07

We formulated the mixed quantum/classical theory for rotationally and vibrationally inelastic scattering process in the diatomic molecule + atom system. Two versions of theory are presented, first in the space-fixed and second in the body-fixed reference frame. First version is easy to derive and the resultant equations of motion are transparent, but the state-to-state transition matrix is complex-valued and dense. Such calculations may be computationally demanding for heavier molecules and/or higher temperatures, when the number of accessible channels becomes large. In contrast, the second version of theory requires some tedious derivations and the final equations of motion are rather complicated (not particularly intuitive). However, the state-to-state transitions are driven by real-valued sparse matrixes of much smaller size. Thus, this formulation is the method of choice from the computational point of view, while the space-fixed formulation can serve as a test of the body-fixed equations of motion, and the code. Rigorous numerical tests were carried out for a model system to ensure that all equations, matrixes, and computer codes in both formulations are correct.

Mixed quantum/classical theory of rotationally and vibrationally inelastic scattering in space-fixed and body-fixed reference frames

International Nuclear Information System (INIS)

Semenov, Alexander; Babikov, Dmitri

2013-01-01

We formulated the mixed quantum/classical theory for rotationally and vibrationally inelastic scattering process in the diatomic molecule + atom system. Two versions of theory are presented, first in the space-fixed and second in the body-fixed reference frame. First version is easy to derive and the resultant equations of motion are transparent, but the state-to-state transition matrix is complex-valued and dense. Such calculations may be computationally demanding for heavier molecules and/or higher temperatures, when the number of accessible channels becomes large. In contrast, the second version of theory requires some tedious derivations and the final equations of motion are rather complicated (not particularly intuitive). However, the state-to-state transitions are driven by real-valued sparse matrixes of much smaller size. Thus, this formulation is the method of choice from the computational point of view, while the space-fixed formulation can serve as a test of the body-fixed equations of motion, and the code. Rigorous numerical tests were carried out for a model system to ensure that all equations, matrixes, and computer codes in both formulations are correct

Static Universe model existing due to the matter-dark energy coupling

International Nuclear Information System (INIS)

Cabo Bizet, A.; Cabo Montes de Oca, A.

2007-08-01

The work investigates a static, isotropic and almost homogeneous Universe containing a real scalar field modeling the Dark-Energy (quintaessence) interacting with pressureless matter. It is argued that the interaction between matter and the Dark Energy, is essential for the very existence of the considered solution. Assuming the possibility that Dark-Energy can be furnished by the Dilaton (a scalar field reflecting the condensation of string states with zero angular momentum) we fix the value of scalar field at the origin to the Planck scale. It became possible to fix the ratio of the amount of Dark Energy to matter energy, in the currently estimated value (0.7)/0.3 and also the observed magnitude of the Hubble constant. The small value of the mass for the scalar field chosen for fixing the above ratio and Hubble effect strength, results to be of the order of 10 -29 cm -1 , a small value which seems to be compatible with the zero mass of the Dilaton in the lowest approximations. (author)

Brouwer's ε-fixed point from Sperner's lemma

NARCIS (Netherlands)

Dalen, D. van

It is by now common knowledge that Brouwer gave mathematics in 1911 a miraculous tool, the fixed point theorem, and that later in life, he disavowed it. It usually came as a shock when he replied to the question “is the fixed point theorem correct ?” with a point blank “no”. This rhetoric exchange

Homogeneity of Continuum Model of an Unsteady State Fixed Bed Reactor for Lean CH4 Oxidation

Directory of Open Access Journals (Sweden)

Subagjo

2014-07-01

Full Text Available In this study, the homogeneity of the continuum model of a fixed bed reactor operated in steady state and unsteady state systems for lean CH4 oxidation is investigated. The steady-state fixed bed reactor system was operated under once-through direction, while the unsteady-state fixed bed reactor system was operated under flow reversal. The governing equations consisting of mass and energy balances were solved using the FlexPDE software package, version 6. The model selection is indispensable for an effective calculation since the simulation of a reverse flow reactor is time-consuming. The homogeneous and heterogeneous models for steady state operation gave similar conversions and temperature profiles, with a deviation of 0.12 to 0.14%. For reverse flow operation, the deviations of the continuum models of thepseudo-homogeneous and heterogeneous models were in the range of 25-65%. It is suggested that pseudo-homogeneous models can be applied to steady state systems, whereas heterogeneous models have to be applied to unsteady state systems.

A Comparative Experimental Study of Fixed Temperature and Fixed Heat Flux Boundary Conditions in Turbulent Thermal Convection

Science.gov (United States)

Huang, Shi-Di; Wang, Fei; Xi, Heng-Dong; Xia, Ke-Qing

2014-11-01

We report an experimental study of the influences of thermal boundary condition in turbulent thermal convection. Two configurations were examined: one was fixed heat flux at the bottom boundary and fixed temperature at the top (HC cells); the other was fixed temperature at both boundaries (CC cells). It is found that the flow strength in the CC cells is on average 9% larger than that in the HC ones, which could be understood as change in plume emission ability under different boundary conditions. It is further found, rather surprisingly, that flow reversals of the large-scale circulation occur more frequently in the CC cell, despite a stronger large-scale flow and more uniform temperature distribution over the boundaries. These findings provide new insights into turbulent thermal convection and should stimulate further studies, especially experimental ones. This work is supported by the Hong Kong Research Grants Council under Grant No. CUHK 403712.

Proton angular distribution of {sup 16}O(d,p){sup 17}O{sup *} near a deuteron capture resonance; Evolution de la distribution angulaire des protons {sup 16}O(d,p){sup 17}O{sup *} au voisinage d'une resonance de capture du deuteron

Energy Technology Data Exchange (ETDEWEB)

Berthelot, R; Cohen, E; Cotton, H; Farraggi, T; Grjebine, A; Leveque, V; Naggiar, M; Roclawski-Conjeaud, D; Szteinsznaider, D [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

1954-07-01

The study of angular distributions of the protons from the reaction {sup 16}O(d,p){sup 17}O{sup *} (level at 875 keV) was made, using a photographic method, at seven different deuteron energies, from 1.66 to 2.20 MeV (obtained with the Saclay electrostatic generator). The analysis of results shows that the angular distribution for forward angles is for each chosen energy in good agreement with the stripping theory (l = 0), even at the maximum of the capture resonance of the deuteron, about 2.1 MeV. Moreover, the differential cross section at 7 deg reaches a maximum for this resonance energy. (author) [French] L'etude des distributions angulaires des protons emis au cours de la reaction {sup 16}O(d,p){sup 17}O{sup *} (niveau a 875 key) a ete effectuee, par une methode photographique, pour 7 energies differentes de deuterons comprises entre 1,66 et 2,20 MeV (obtenues grace a l'accelerateur electrostatique de Saclay). L'analyse des resultats montre que la distribution angulaire vers l'avant est, pour toutes ces energies, en bon accord avec la theorie du ''stripping'' ( 1=0), meme au maximum de la resonance de capture du deuteron situee vers 2,1 MeV. De plus, la section efficace differentielle a 7 deg passe par un maximum pour cette energie de resonance. (auteur)

A model for complex flows of soft glassy materials with application to flows through fixed fiber beds

Energy Technology Data Exchange (ETDEWEB)

Sarkar, Arijit; Koch, Donald L., E-mail: dlk15@cornell.edu [School of Chemical and Biomolecular Engineering, Cornell University, 120 Olin Hall, Ithaca, New York 14853-5201 (United States)

2015-11-15

The soft glassy rheology (SGR) model has successfully described the time dependent simple shear rheology of a broad class of complex fluids including foams, concentrated emulsions, colloidal glasses, and solvent-free nanoparticle-organic hybrid materials (NOHMs). The model considers a distribution of mesoscopic fluid elements that hop from trap to trap at a rate which is enhanced by the work done to strain the fluid element. While an SGR fluid has a broad exponential distribution of trap energies, the rheology of NOHMs is better described by a narrower energy distribution and we consider both types of trap energy distributions in this study. We introduce a tensorial version of these models with a hopping rate that depends on the orientation of the element relative to the mean stress field, allowing a range of relative strengths of the extensional and simple shear responses of the fluid. As an application of these models we consider the flow of a soft glassy material through a dilute fixed bed of fibers. The dilute fixed bed exhibits a range of local linear flows which alternate in a chaotic manner with time in a Lagrangian reference frame. It is amenable to an analytical treatment and has been used to characterize the strong flow response of many complex fluids including fiber suspensions, dilute polymer solutions and emulsions. We show that the accumulated strain in the fluid elements has an abrupt nonlinear growth at a Deborah number of order one in a manner similar to that observed for polymer solutions. The exponential dependence of the hopping rate on strain leads to a fluid element deformation that grows logarithmically with Deborah number at high Deborah numbers. SGR fluids having a broad range of trap energies flowing through fixed beds can exhibit a range of rheological behaviors at small Deborah numbers ranging from a yield stress, to a power law response and finally to Newtonian behavior.

A model for complex flows of soft glassy materials with application to flows through fixed fiber beds

KAUST Repository

Sarkar, Arijit

2015-11-01

© 2015 The Society of Rheology. The soft glassy rheology (SGR) model has successfully described the time dependent simple shear rheology of a broad class of complex fluids including foams, concentrated emulsions, colloidal glasses, and solvent-free nanoparticle-organic hybrid materials (NOHMs). The model considers a distribution of mesoscopic fluid elements that hop from trap to trap at a rate which is enhanced by the work done to strain the fluid element. While an SGR fluid has a broad exponential distribution of trap energies, the rheology of NOHMs is better described by a narrower energy distribution and we consider both types of trap energy distributions in this study. We introduce a tensorial version of these models with a hopping rate that depends on the orientation of the element relative to the mean stress field, allowing a range of relative strengths of the extensional and simple shear responses of the fluid. As an application of these models we consider the flow of a soft glassy material through a dilute fixed bed of fibers. The dilute fixed bed exhibits a range of local linear flows which alternate in a chaotic manner with time in a Lagrangian reference frame. It is amenable to an analytical treatment and has been used to characterize the strong flow response of many complex fluids including fiber suspensions, dilute polymer solutions and emulsions. We show that the accumulated strain in the fluid elements has an abrupt nonlinear growth at a Deborah number of order one in a manner similar to that observed for polymer solutions. The exponential dependence of the hopping rate on strain leads to a fluid element deformation that grows logarithmically with Deborah number at high Deborah numbers. SGR fluids having a broad range of trap energies flowing through fixed beds can exhibit a range of rheological behaviors at small Deborah numbers ranging from a yield stress, to a power law response and finally to Newtonian behavior.

A model for complex flows of soft glassy materials with application to flows through fixed fiber beds

KAUST Repository

Sarkar, Arijit; Koch, Donald L.

2015-01-01

© 2015 The Society of Rheology. The soft glassy rheology (SGR) model has successfully described the time dependent simple shear rheology of a broad class of complex fluids including foams, concentrated emulsions, colloidal glasses, and solvent-free nanoparticle-organic hybrid materials (NOHMs). The model considers a distribution of mesoscopic fluid elements that hop from trap to trap at a rate which is enhanced by the work done to strain the fluid element. While an SGR fluid has a broad exponential distribution of trap energies, the rheology of NOHMs is better described by a narrower energy distribution and we consider both types of trap energy distributions in this study. We introduce a tensorial version of these models with a hopping rate that depends on the orientation of the element relative to the mean stress field, allowing a range of relative strengths of the extensional and simple shear responses of the fluid. As an application of these models we consider the flow of a soft glassy material through a dilute fixed bed of fibers. The dilute fixed bed exhibits a range of local linear flows which alternate in a chaotic manner with time in a Lagrangian reference frame. It is amenable to an analytical treatment and has been used to characterize the strong flow response of many complex fluids including fiber suspensions, dilute polymer solutions and emulsions. We show that the accumulated strain in the fluid elements has an abrupt nonlinear growth at a Deborah number of order one in a manner similar to that observed for polymer solutions. The exponential dependence of the hopping rate on strain leads to a fluid element deformation that grows logarithmically with Deborah number at high Deborah numbers. SGR fluids having a broad range of trap energies flowing through fixed beds can exhibit a range of rheological behaviors at small Deborah numbers ranging from a yield stress, to a power law response and finally to Newtonian behavior.

Gauge-fixing ambiguity and monopole number

International Nuclear Information System (INIS)

Hioki, S.; Miyamura, O.

1991-01-01

Gauge-fixing ambiguities of lattice SU(2) QCD are studied in the maximally abelian and unitary gauges. In the former, we find local maxima of a gauge-fixing function which may correspond to Gribov copies. There is a definite anti-correlation between the number of monopoles and the value of the function. Errors of measured quantities coming from the ambiguity are found to be less than inherent dispersion in the ensemble average. No ambiguity is found in the unitary gauges. (orig.)

Improvement of the methods for company’s fixed assets analysis

Directory of Open Access Journals (Sweden)

T. A. Zhurkina

2018-01-01

Full Text Available Fixed assets are an integral component of the productive capacity of any enterprise. The financial results of the enterprise largely depend on their intensity and efficiency of use. The analysis of fixed assets is usually carried out using an integrated and systematic approach, based on their availability, their movement, efficiency of use (including their active part. In the opinion of some authors, the traditional methods of analyzing fixed assets have a number of shortcomings, since they do not take into account the life cycle of an enterprise, the ecological aspects of the operation of fixed assets, the operation specifics of the individual divisions of a company and its branches. In order to improve the methodology for analyzing fixed assets, the authors proposed to use formalized and nonformalized criteria for analyzing the risks associated with the fixed asset use. A survey questionnaire was designed to determine the likelihood of the risk of economic losses associated with the use of fixed assets. The authors propose using the integral indicator for the purpose of analyzing the risk of using fixed assets in dynamics. In order to improve the procedure for auditing, the authors proposed segregation of economic transactions with fixed assets according to their cycles in accordance with the stage of their reproduction. Operational analysis is important for managing the efficiency of the fixed asset use, especially during a critical period. Using the analysis of the regularity in grain combines performance would reduce losses during harvesting, implement the work within strictly defined time frame and remunerate the employees for high-quality and intensive performance of their tasks.

Fixed site neutralization model programmer's manual. Volume 1

International Nuclear Information System (INIS)

Engi, D.; Chapman, L.; Judnick, W.; Blum, R.; Broegler, L.; Lenz, J.; Weinthraub, A.; Ballard, D.

1979-12-01

The Fixed Site Neutralization Model (FSNM) is a stochastic, time-stepped simulation of an engagement process whereby an adversary force attempts to steal or sabotage sensitive (e.g., nuclear) materials being guarded by a security force on a fixed site and a response force that is off-site. FSNM will assist regulatory bodies of the US Government in evaluating fixed site physical protection systems at various installations in a variety of scenarios. Most data input to the Fixed Site Neutralization Model are in binary form. The user's data are transformed into binary form by two supporting modules, the Data Preprocessor (DPP) and the Plex Preprocessor (PPP). Both preprocessors and the FSNM itself are written in FORTRAN. This volume of the program maintenance program contains: introduction, logic descriptions, PLEX data structure, PLEX records, dictionaries, and error conditions and comments

Distribution of variable vs fixed costs of hospital care.

Science.gov (United States)

Roberts, R R; Frutos, P W; Ciavarella, G G; Gussow, L M; Mensah, E K; Kampe, L M; Straus, H E; Joseph, G; Rydman, R J

1999-02-17

Most strategies proposed to control the rising cost of health care are aimed at reducing medical resource consumption rates. These approaches may be limited in effectiveness because of the relatively low variable cost of medical care. Variable costs (for medication and supplies) are saved if a facility does not provide a service while fixed costs (for salaried labor, buildings, and equipment) are not saved over the short term when a health care facility reduces service. To determine the relative variable and fixed costs of inpatient and outpatient care for a large urban public teaching hospital. Cost analysis. A large urban public teaching hospital. All expenditures for the institution during 1993 and for each service were categorized as either variable or fixed. Fixed costs included capital expenditures, employee salaries and benefits, building maintenance, and utilities. Variable costs included health care worker supplies, patient care supplies, diagnostic and therapeutic supplies, and medications. In 1993, the hospital had nearly 114000 emergency department visits, 40000 hospital admissions, 240000 inpatient days, and more than 500000 outpatient clinic visits. The total budget for 1993 was $429.2 million, of which $360.3 million (84%) was fixed and $68.8 million (16%) was variable. Overall, 31.5% of total costs were for support expenses such as utilities, employee benefits, and housekeeping salaries, and 52.4% included direct costs of salary for service center personnel who provide services to individual patients. The majority of cost in providing hospital service is related to buildings, equipment, salaried labor, and overhead, which are fixed over the short term. The high fixed costs emphasize the importance of adjusting fixed costs to patient consumption to maintain efficiency.

Utilization Bound of Non-preemptive Fixed Priority Schedulers

Science.gov (United States)

Park, Moonju; Chae, Jinseok

It is known that the schedulability of a non-preemptive task set with fixed priority can be determined in pseudo-polynomial time. However, since Rate Monotonic scheduling is not optimal for non-preemptive scheduling, the applicability of existing polynomial time tests that provide sufficient schedulability conditions, such as Liu and Layland's bound, is limited. This letter proposes a new sufficient condition for non-preemptive fixed priority scheduling that can be used for any fixed priority assignment scheme. It is also shown that the proposed schedulability test has a tighter utilization bound than existing test methods.

PDF fit in the fixed-flavour-number scheme

International Nuclear Information System (INIS)

Alekhin, S.; Bluemlein, J.; Moch, S.

2012-02-01

We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n f =3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant α s (M Z ).

Fixed-bed Reactor Dynamics and Control - A Review

DEFF Research Database (Denmark)

Jørgensen, S. B.

1986-01-01

The industrial diversity of fixed bed reactors offers a challenging and relevant set of control problems. These intricate problems arise due to the rather complex dynamics of fixed bed reactors and to the complexity of actual reactor configurations. Many of these control problems are nonlinear...... and multi-variable. During the last decade fixed bed reactor control strategies have been proposed and investigated experimentally. This paper reviews research on these complex control problems with an emphasis upon solutions which have been demon-strated to work in the laboratory and hold promise...

Review of calorimetry in Fermilab fixed-target experiments

International Nuclear Information System (INIS)

Crisler, M.B.

1995-04-01

The fixed-target program at Fermilab comprises as many as thirteen simultaneous experiments in ten separate beamlines using beams of primary protons, pions, kaons, electrons, neutrinos, and muons. The fixed target beamlines were last in operation in the latter half of 1991, shutting down in 1992. The next fixed target run is scheduled for early 1996. This article describes some of the wide variety of calorimetric devices that were in use in the past run or to be used in the coming run. Special attention is devoted to the new devices currently under construction

Wall shear stress fixed points in cardiovascular fluid mechanics.

Science.gov (United States)

Arzani, Amirhossein; Shadden, Shawn C

2018-05-17

Complex blood flow in large arteries creates rich wall shear stress (WSS) vectorial features. WSS acts as a link between blood flow dynamics and the biology of various cardiovascular diseases. WSS has been of great interest in a wide range of studies and has been the most popular measure to correlate blood flow to cardiovascular disease. Recent studies have emphasized different vectorial features of WSS. However, fixed points in the WSS vector field have not received much attention. A WSS fixed point is a point on the vessel wall where the WSS vector vanishes. In this article, WSS fixed points are classified and the aspects by which they could influence cardiovascular disease are reviewed. First, the connection between WSS fixed points and the flow topology away from the vessel wall is discussed. Second, the potential role of time-averaged WSS fixed points in biochemical mass transport is demonstrated using the recent concept of Lagrangian WSS structures. Finally, simple measures are proposed to quantify the exposure of the endothelial cells to WSS fixed points. Examples from various arterial flow applications are demonstrated. Copyright © 2018 Elsevier Ltd. All rights reserved.

Fixed target flammable gas upgrades

International Nuclear Information System (INIS)

Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

1996-12-01

In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only

Cost efficiency of Japanese steam power generation companies: A Bayesian comparison of random and fixed frontier models

Energy Technology Data Exchange (ETDEWEB)

Assaf, A. George [Isenberg School of Management, University of Massachusetts-Amherst, 90 Campus Center Way, Amherst 01002 (United States); Barros, Carlos Pestana [Instituto Superior de Economia e Gestao, Technical University of Lisbon, Rua Miguel Lupi, 20, 1249-078 Lisbon (Portugal); Managi, Shunsuke [Graduate School of Environmental Studies, Tohoku University, 6-6-20 Aramaki-Aza Aoba, Aoba-Ku, Sendai 980-8579 (Japan)

2011-04-15

This study analyses and compares the cost efficiency of Japanese steam power generation companies using the fixed and random Bayesian frontier models. We show that it is essential to account for heterogeneity in modelling the performance of energy companies. Results from the model estimation also indicate that restricting CO{sub 2} emissions can lead to a decrease in total cost. The study finally discusses the efficiency variations between the energy companies under analysis, and elaborates on the managerial and policy implications of the results. (author)

Reviving nuclear requires broad technology fix

International Nuclear Information System (INIS)

Hyman, L.S.

1991-01-01

What will it take to revive nuclear power in this country? For a beginning, nuclear plants must be the lowest-cost alternative to providing additional energy supplies; they must be smaller in size and easier to build and license than in the past, and public confidence in nuclear power must be restored. But even this is not enough to attract investors, he says. Regulatory policies, corporate structures, and financial arrangements must change as well. Hyman offers some ideas for changes that would be attractive to investors: place construction work in progress in the rate base, create a pay-as-you-go approach to construction; federal rather than state regulation of power rates; and ownership and construction by a consortium of electrical equipment manufacturers, engineering and construction firms, utilities, and fuel supplies. But even then, Hyman is not optimistic. Fixing nuclear power is possible only if there is a need for the product, the price is right, the profit is adequate, the people want it, the waste is disposed of, and somebody will take the risk of financing its revival

2001 overview

International Nuclear Information System (INIS)

Anon.

2002-01-01

This special issue of 'CEA-Saclay, le Journal' celebrates the 50. anniversary of the very first big facilities (experimental reactors and accelerators) that were put in service at the CEA-Saclay research center. This issue aims at presenting the pluri-disciplinary aspect of the research works that are carried out today at Saclay in the following domains: nuclear energy (Descartes, a new neutronic calculation tool for reactors; a hot laboratory for irradiated materials; a brand new core for Osiris; foreseeing corrosion; cladding under high pressure; how do radionuclide migrate; clay, a barrier to confine nuclear wastes; modeling extreme situations), health (a hope for allergic people; what reading means?; in the heart of brain connections; how the cell organizes its repair?; molecules for cancer targeting; the CEA against mad cow disease), technology (towards the single-electron transistor; toxic ions trapped; neutrons are investigating; a new referential in spectrometry; frequency converting electrons; a new technique to study the porous environments; the Micromegas detector on Ariane's wire; optical fibers for Saint-Jean's bridge; the camera explores Petrus; the French concrete resists well), astrophysics (a fossil in the Milky Way; about the neutrino, only new things; a new eye in the cosmos), climatology/environment (the first secrets of the Vostok lake; the main role of the ocean), physics (does the Earth is doing more than just rotating?; a little nuclear revolution; a step towards the quantum computer; BaBar in search of the lost world; the mysterious kaons), training (tomorrow's energy sources), and documentation (the documentary search at the researchers' service). (J.S.)

Metallic and antiferromagnetic fixed points from gravity

Science.gov (United States)

Paul, Chandrima

2018-06-01

We consider SU(2) × U(1) gauge theory coupled to matter field in adjoints and study RG group flow. We constructed Callan-Symanzik equation and subsequent β functions and study the fixed points. We find there are two fixed points, showing metallic and antiferromagnetic behavior. We have shown that metallic phase develops an instability if certain parametric conditions are satisfied.

Gauge fixing problem in the conformal QED

International Nuclear Information System (INIS)

Ichinose, Shoichi

1986-01-01

The gauge fixing problem in the conformal (spinor and scalar) QED is examined. For the analysis, we generalize Dirac's manifestly conformal-covariant formalism. It is shown that the (vector and matter) fields must obey a certain mixed (conformal and gauge) type of transformation law in order to fix the local gauge symmetry preserving the conformal invariance in the Lagrangian. (orig.)

Fixed point algebras for easy quantum groups

DEFF Research Database (Denmark)

Gabriel, Olivier; Weber, Moritz

2016-01-01

Compact matrix quantum groups act naturally on Cuntz algebras. The first author isolated certain conditions under which the fixed point algebras under this action are Kirchberg algebras. Hence they are completely determined by their K-groups. Building on prior work by the second author,we prove...... that free easy quantum groups satisfy these conditions and we compute the K-groups of their fixed point algebras in a general form. We then turn to examples such as the quantum permutation group S+ n,the free orthogonal quantum group O+ n and the quantum reflection groups Hs+ n. Our fixed point......-algebra construction provides concrete examples of free actions of free orthogonal easy quantum groups,which are related to Hopf-Galois extensions....

A fixed target facility at the SSC

International Nuclear Information System (INIS)

Loken, S.; Morfin, J.G.

1984-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required

DISCRETE FIXED POINT THEOREMS AND THEIR APPLICATION TO NASH EQUILIBRIUM

OpenAIRE

Sato, Junichi; Kawasaki, Hidefumi

2007-01-01

Fixed point theorems are powerful tools in not only mathematics but also economic. In some economic problems, we need not real-valued but integer-valued equilibriums. However, classical fixed point theorems guarantee only real-valued equilibria. So we need discrete fixed point theorems in order to get discrete equilibria. In this paper, we first provide discrete fixed point theorems, next apply them to a non-cooperative game and prove the existence of a Nash equilibrium of pure strategies.

Gauge fixings, evolution generators and world-line conditions in relativistic classical mechanics with constraints

International Nuclear Information System (INIS)

Lusanna, L.

1981-01-01

After a review of the main models for classical relativistic N-particle systems based upon Dirac's theory of constraints, a detailed study of their Hamiltonian formulation is made. The choice of the arbitrary functions and of the gauge-fixing constraints and the associated realizations of the reduced phase-space and of the observables by means of Dirac brackets are examined in detail. The restrictions on the gauge fixings to obtain compatibility between the evolution in the reduced phase space, generated by the total energy of the system, and the one in the constraint hypersurface, generated by the Dirac Hamiltonian, are found. It is also demonstrated that these restrictions are nothing else than the world-line conditions, i.e. gauge transformations are needed to ensure the objective existence of the world-lines and manifest covariance is broken. This is due to the property of the Dirac brackets of preserving the gauge fixings in every frame of reference. Predictive mechanics and the Currie-Hill world-line conditions are not in contradiction with the previous results: avoiding the Dirac-bracket mechanism, they save the manifest covariance but at the price of using accelerations which are complicated functions of the original potentials depending upon the whole history of the system. (author)

Controlling cyanobacterial blooms in hypertrophic Lake Taihu, China: will nitrogen reductions cause replacement of non-N2 fixing by N2 fixing taxa?

Directory of Open Access Journals (Sweden)

Hans W Paerl

Full Text Available Excessive anthropogenic nitrogen (N and phosphorus (P inputs have caused an alarming increase in harmful cyanobacterial blooms, threatening sustainability of lakes and reservoirs worldwide. Hypertrophic Lake Taihu, China's third largest freshwater lake, typifies this predicament, with toxic blooms of the non-N2 fixing cyanobacteria Microcystis spp. dominating from spring through fall. Previous studies indicate N and P reductions are needed to reduce bloom magnitude and duration. However, N reductions may encourage replacement of non-N2 fixing with N2 fixing cyanobacteria. This potentially counterproductive scenario was evaluated using replicate, large (1000 L, in-lake mesocosms during summer bloom periods. N+P additions led to maximum phytoplankton production. Phosphorus enrichment, which promoted N limitation, resulted in increases in N2 fixing taxa (Anabaena spp., but it did not lead to significant replacement of non-N2 fixing with N2 fixing cyanobacteria, and N2 fixation rates remained ecologically insignificant. Furthermore, P enrichment failed to increase phytoplankton production relative to controls, indicating that N was the most limiting nutrient throughout this period. We propose that Microcystis spp. and other non-N2 fixing genera can maintain dominance in this shallow, highly turbid, nutrient-enriched lake by outcompeting N2 fixing taxa for existing sources of N and P stored and cycled in the lake. To bring Taihu and other hypertrophic systems below the bloom threshold, both N and P reductions will be needed until the legacy of high N and P loading and sediment nutrient storage in these systems is depleted. At that point, a more exclusive focus on P reductions may be feasible.

'Thermal ghosts': apparent decay of fixed surfaces caused by heat diffusion

International Nuclear Information System (INIS)

Livadiotis, George

2007-01-01

The behaviour concerning classical heat diffusion on fixed thermal surfaces, studied by observations, still holds surprises. As soon as convective and radiative processes are negligible within the medium, this is considered to be free from energy sources and sinks. Then, the heat diffusion equation is conveniently solved using standard Fourier methods. Some considerations about the contrast effect suggest that the surface boundary would rather be observed to follow specific area decay dynamics than remaining fixed and static. Here it is shown that the apparent boundary lies on a specific isothermal spatiotemporal curve, which depends on the observing device. This is characterized by a slight, though determinative, difference between its radiance and that of the ambient background. Thereafter, the heat diffusion yields apparent boundary shrinkage with the passing of time. This phenomenon is particularly notable for two reasons: its lifetime and final decay rate depend only on the medium thermal properties, while being independent of the apparent boundary spatiotemporal curve. Thus, the former provides a suitable method for measuring the medium thermal properties via the observational data. The latter strongly reveal a kind of universality of some characteristic properties of the phenomenon, common to all observers

Low energy pion-pion phase shifts from chiral perturbation theory

International Nuclear Information System (INIS)

Borges, J. Sa; Barbosa, J. Soares; Oguri, V.

1997-01-01

The low energy pion-pion S- and P- experimental phase-shifts are fitted with chiral perturbation theory (Ch PT) amplitude. The low energy pion-pion S- and P- experimental phase-shifts. The parameters l 1 and l 2 of the one loop corrected amplitude are fixed and the corresponding values of the scattering lengths are calculated. We propose that the present method is the best way to fix Ch P T parameters. The unitarization program of current algebra is also discussed. (author)

A study on fixing force generation mechanism of ER gel

International Nuclear Information System (INIS)

Tanaka, H; Kakinuma, Y; Aoyama, T; Anzai, H

2009-01-01

Electro-rheological Gel (ERG) is a new functional elastomer which changes its surface frictional and adhesive property according to the intensity of applied electrical field. This unique property is called ERG effect. The upper sliding electrode placed on the surface of ERG is fixed by the adhesive effect of ERG under electrical field. Variable fixing forces due to adhesion are generated by this effect. However, relationship between physical factors and generated fixing force has not yet been clarified. In this study, physical mechanism of fixing phenomenon is elucidated experimentally from the view point of frictional force and adhesive force. From the results, empirical equation of generated fixing force is originally derived to establish the theory of ERG effect.

A study on fixing force generation mechanism of ER gel

Energy Technology Data Exchange (ETDEWEB)

Tanaka, H; Kakinuma, Y; Aoyama, T [School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan); Anzai, H [Fujikura kasei Co., Ltd., 2-6-15 Shibakouen, Minato-ku, Tokyo (Japan)], E-mail: h-tanaka@ina.sd.keio.ac.jp

2009-02-01

Electro-rheological Gel (ERG) is a new functional elastomer which changes its surface frictional and adhesive property according to the intensity of applied electrical field. This unique property is called ERG effect. The upper sliding electrode placed on the surface of ERG is fixed by the adhesive effect of ERG under electrical field. Variable fixing forces due to adhesion are generated by this effect. However, relationship between physical factors and generated fixing force has not yet been clarified. In this study, physical mechanism of fixing phenomenon is elucidated experimentally from the view point of frictional force and adhesive force. From the results, empirical equation of generated fixing force is originally derived to establish the theory of ERG effect.

INIS, all about world nuclear sciences and technologies; Inis, tout savoir sur le nucleaire mondial

Energy Technology Data Exchange (ETDEWEB)

Bender, A

2008-10-15

This short paper presents the INIS database, its content and scope, how it is supplied, in particular by the French atomic energy commission (CEA) which is the official representative for France. It presents also the French INIS team and its everyday work at CEA-Saclay in the framework of the INIS activity. (J.S.)

Extending RTA/Linux with fixed-priority scheduling with deferred preemption

NARCIS (Netherlands)

Bergsma, M.; Holenderski, M.J.; Bril, R.J.; Lukkien, J.J.; Petters, S.M.; Zijlstra, P.

2009-01-01

Fixed-Priority Scheduling with Deferred Preemption (FPDS) is a middle ground between Fixed-Priority Pre-emptive Scheduling and Fixed-Priority Non-preemptive Scheduling, and offers advantages with respect to context switch overhead and resource access control. In this paper we present our work on

Accuracy Constraint Determination in Fixed-Point System Design

Directory of Open Access Journals (Sweden)

Serizel R

2008-01-01

Full Text Available Most of digital signal processing applications are specified and designed with floatingpoint arithmetic but are finally implemented using fixed-point architectures. Thus, the design flow requires a floating-point to fixed-point conversion stage which optimizes the implementation cost under execution time and accuracy constraints. This accuracy constraint is linked to the application performances and the determination of this constraint is one of the key issues of the conversion process. In this paper, a method is proposed to determine the accuracy constraint from the application performance. The fixed-point system is modeled with an infinite precision version of the system and a single noise source located at the system output. Then, an iterative approach for optimizing the fixed-point specification under the application performance constraint is defined and detailed. Finally the efficiency of our approach is demonstrated by experiments on an MP3 encoder.

Some fixed point theorems in fuzzy reflexive Banach spaces

International Nuclear Information System (INIS)

Sadeqi, I.; Solaty kia, F.

2009-01-01

In this paper, we first show that there are some gaps in the fixed point theorems for fuzzy non-expansive mappings which are proved by Bag and Samanta, in [Bag T, Samanta SK. Fixed point theorems on fuzzy normed linear spaces. Inf Sci 2006;176:2910-31; Bag T, Samanta SK. Some fixed point theorems in fuzzy normed linear spaces. Inform Sci 2007;177(3):3271-89]. By introducing the notion of fuzzy and α- fuzzy reflexive Banach spaces, we obtain some results which help us to establish the correct version of fuzzy fixed point theorems. Second, by applying Theorem 3.3 of Sadeqi and Solati kia [Sadeqi I, Solati kia F. Fuzzy normed linear space and it's topological structure. Chaos, Solitons and Fractals, in press] which says that any fuzzy normed linear space is also a topological vector space, we show that all topological version of fixed point theorems do hold in fuzzy normed linear spaces.

Technical progress report of the Indiana University High Energy Physics Group, December 1, 1976--November 30, 1977

International Nuclear Information System (INIS)

Brabson, B.B.; Crittenden, R.R.; Dzierba, A.R.; Heinz, R.M.; Neal, H.A.; Ogren, H.O.

1977-01-01

Since the beginning of the ERDA contract year (Dec. 1, 1976), the Indiana High Energy Physics Group has been actively participating in experimental programs at SLAC, Fermilab, CERN, and the Argonne ZGS. The SLAC effort (E103) is a search for exotic mesons. The polarization program at Fermilab's internal target (CO) area involves polarization measurements in pp → pp (E313) and pp → pX (E522). The contribution to the Multiparticle Spectrometer at Fermilab is a major ingredient in a series of experiments (E110/260/523/557) studying low-p/sub t/ and high-p/sub t/ hadron-hadron collisions. At CERN work is carried out with a Saclay group at the SPS to investigate properties of psi meson production in experiment WAll. The Argonne ZGS endeavor (E399) is to measure various inclusive polarizations, complementing Fermilab E522 work. Also participation is given in design work on a PEP proposal. A discussion of these experiments is given

Energy confinement of high-density tokamaks

NARCIS (Netherlands)

Schüller, F.C.; Schram, D.C.; Coppi, B.; Sadowski, W.

1977-01-01

Neoclassical ion heat conduction is the major energy loss mechanism in the center of an ohmically heated high-d. tokamak discharge (n>3 * 1020 m-3). This fixes the mutual dependence of plasma quantities on the axis and leads to scaling laws for the poloidal b and energy confinement time, given the

Characterizations of fixed points of quantum operations

International Nuclear Information System (INIS)

Li Yuan

2011-01-01

Let φ A be a general quantum operation. An operator B is said to be a fixed point of φ A , if φ A (B)=B. In this note, we shall show conditions under which B, a fixed point φ A , implies that B is compatible with the operation element of φ A . In particular, we offer an extension of the generalized Lueders theorem.

48 CFR 46.307 - Fixed-price research and development contracts.

Science.gov (United States)

2010-10-01

... REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.307 Fixed-price research and development... Development—Fixed-Price, in solicitations and contracts for research and development when (1) the primary... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Fixed-price research and...

48 CFR 1816.202 - Firm-fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Firm-fixed-price contracts. 1816.202 Section 1816.202 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1816.202 Firm...

Fixed-point data-collection method of video signal

International Nuclear Information System (INIS)

Tang Yu; Yin Zejie; Qian Weiming; Wu Xiaoyi

1997-01-01

The author describes a Fixed-point data-collection method of video signal. The method provides an idea of fixed-point data-collection, and has been successfully applied in the research of real-time radiography on dose field, a project supported by National Science Fund

A model for integrated dictionaries of fixed expressions

DEFF Research Database (Denmark)

Bergenholtz, Henning; Bothma, Theo; Gouws, Rufus

2011-01-01

This paper discusses a project for the creation of a theoretical model for integrated e-dictionaries, illustrated by means of an e-information tool for the presentation and treatment of fixed expressions using Afrikaans as example language. To achieve this a database of fixed expressions...

PDF fit in the fixed-flavour-number scheme

Energy Technology Data Exchange (ETDEWEB)

Alekhin, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Institute for High Energy Physics, Moscow (Russian Federation); Bluemlein, J.; Moch, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

2012-02-15

We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n{sub f}=3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant {alpha}{sub s}(M{sub Z}).

Least fixed points revisited

NARCIS (Netherlands)

J.W. de Bakker (Jaco)

1975-01-01

textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

Prototype calorimeters for the NA3 experiment

CERN Multimedia

1975-01-01

The NA3 Experiment was set-up on the North Area of the SPS by the CERN/ Ecole Polytechnique/College de France/ Orsay/Saclay Collaboration, to study high transverse momentum leptons and hadrons from hadron collisions. The calorimeters measured the energy of hadrons (prototype on the right) and leptons (prototype on the left). They used a new type of plastic scintillator (plexipop). (see CERN Courier of November 1975) energy (prototype on the right)

Solidification and properties of photovoltaic silicon

International Nuclear Information System (INIS)

Anon.

2007-01-01

Strenuous efforts are being made to develop an economical process for purifying liquid metallurgical-grade silicon, in response to the growing shortages in high-purity silicon for use in manufacturing photovoltaic cells. A research project is studying this issue at C.E. Saclay, Gif-sur-Yvette, France, co-funded by ADEME (the French Environment and Energy Management Agency) and CEA-INSTN (French Atomic Energy Commission National Institute for Nuclear Science and Technology). (authors)

Energy at Stony Brook.

Science.gov (United States)

Visich, Marian, Jr.

1984-01-01

Discusses strategies used in a course for nonengineering students which consists of case studies of such sociotechnological problems as automobile safety, water pollution, and energy. Solutions to the problems are classified according to three approaches: education, government regulation, and technological fix. (BC)

Detection of African swine fever virus from formalin fixed and non-fixed tissues by polymerase chain reaction

Directory of Open Access Journals (Sweden)

P. D. Luka

2014-10-01

Full Text Available Aim: Formalin fixing and paraffin embedding of tissue samples is one of the techniques for preserving the structural integrity of cells for a very long time. However, extraction and analysis of genomic material from formalin fixed tissue (FFT remains a challenge despite numerous attempts to develop a more effective method. The success of polymerase chain reaction (PCR depends on the quality of DNA extract. Materials and Methods: Here we assessed the conventional method of DNA extraction from FFT for African swine fever virus (ASFV detection. The modified conventional method gave a higher quality DNA when compared with commercially available DNA extraction kits (QIAamp® DNA Mini Kit, DNeasy® Blood and Tissue Kit, and ZR Genomic DNA™ Tissue MiniPrep. Results: An average A260/A280 DNA purity of 0.86-1.68 and 3.22-5.32 μg DNA/mg for formalin fixed and non-fixed tissues, respectively using a conventional method. In a reproducible and three times repeat PCR, the ASFV DNA expected product size of 278 bp was obtained from the DNA extract of the conventional method but not from the DNA extract of the commercial kits. Conclusion: The present study has demonstrated that the conventional method extracts ASFV genome better than commercial kit. In summary, the commercial kit extraction appeared not suitable to purify ASFV DNA from FFT. We, therefore, recommend that the use of the conventional method be considered for African swine fever DNA extraction from FFT.

Joint energy and spinning reserve dispatching and pricing

International Nuclear Information System (INIS)

Rashidinejad, M.; Song, Y.-H.; Javidi Dasht-Bayaz, M.H.

2000-01-01

Unpredictable load demand variations, and also sudden generation interruption, may cause imbalance in power systems. To prevent any blackout and to reduce such total power imbalance, spinning reserve can provide electric power system ability to respond. Adequate amount of spinning reserve should be based on economy and risk as an optimal decision making. This paper uses Quadratic Programming (QP) method to solve Joint Energy and Spinning Reserve Dispatch (JESRD) problem and derives the optimal price of spinning reserve. In JESRD, Unserved Energy Cost (UEC) is considered as an Opportunity Cost of Spinning Reserve (OCSR). To distribute the System Reserve Requirements (SRR) among generation units, two different models, Fixed Reserve Percentage (FRP) or fixed allocation model and Non-Fixed Reserve Percentage (NFRP) or flexible allocation model has been investigated. Numerical results on a 5-bus test system and the 30-bus IEEE standard system, considering FRP and NFRP models are included. (author)

Revisiting the dilatation operator of the Wilson-Fisher fixed point

Energy Technology Data Exchange (ETDEWEB)

Liendo, Pedro [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group

2017-01-15

We revisit the order ε dilatation operator of the Wilson-Fisher fixed point obtained by Kehrein, Pismak, and Wegner in light of recent results in conformal field theory. Our approach is algebraic and based only on symmetry principles. The starting point of our analysis is that the first correction to the dilatation operator is a conformal invariant, which implies that its form is fixed up to an infinite set of coefficients associated with the scaling dimensions of higher-spin currents. These coefficients can be fixed using well-known perturbative results, however, they were recently re-obtained using CFT arguments without relying on perturbation theory. Our analysis then implies that all order-ε scaling dimensions of the Wilson-Fisher fixed point can be fixed by symmetry.

Membrane potentials of membranes with fixed ionic sites

NARCIS (Netherlands)

van den Berg, Albert; van der Wal, P.D.; van der Wal, P.D.; Skowronska-ptasinska, M.; Sudhölter, E.J.R.; Sudholter, Ernst; Bergveld, Piet; Reinhoudt, David

1990-01-01

A theoretical model has been developed to simulate the formation of a membrane potential as a function of physically accessible parameters. The description is an extension of the well-known Teorell-Meyer-Sievers (TMS) model, now including free and fixed ionic sites and free and fixed neutral

A new automatic fixed peak technology of microcontroller

International Nuclear Information System (INIS)

Huang Liguo; Wang Dequan; Zhang Damin; Li Jun; Liu Yuwen; Guo Qingxue; Wang Guifeng

1999-01-01

The microcontroller automatic fixed peak technology which differs from fashion half channel fixed peak is described. It bases on the principles of selecting double single channel and readjusting the voltage of power source. This technology is suitable to the industrial isotope instruments with various radioactive sources

IMPLICATION OF THE FIXED COMBINATIONS IN THE HYPERTENSION TREATMENT

Directory of Open Access Journals (Sweden)

Z. D. Kobalava

2010-01-01

Full Text Available The role of fixed combinations in the hypertension (HT treatment is discussed. Theoretical and practical aspects of combination therapy, principles of rational combination therapy are present. Current guidelines on the use of fixed dose combinations, including start antihypertensive therapy are analyzed. Classification of combinations, advantages and limitations of some of them implementation are also presented. Significance of beta-blocker bisoprolol and thiazide diuretic hydrochlorothiazide fixed combination (Lodoz is shown in HT treatment.

Gauge fixing and the Hamiltonian for cylindrical spacetimes

Science.gov (United States)

Mena Marugán, Guillermo A.

2001-01-01

We introduce a complete gauge fixing for cylindrical spacetimes in vacuo that, in principle, do not contain the axis of symmetry. By cylindrically symmetric we understand spacetimes that possess two commuting spacelike Killing vectors, one of them rotational and the other one translational. The result of our gauge fixing is a constraint-free model whose phase space has four field-like degrees of freedom and that depends on three constant parameters. Two of these constants determine the global angular momentum and the linear momentum in the axis direction, while the third parameter is related with the behavior of the metric around the axis. We derive the explicit expression of the metric in terms of the physical degrees of freedom, calculate the reduced equations of motion and obtain the Hamiltonian that generates the reduced dynamics. We also find upper and lower bounds for this reduced Hamiltonian that provides the energy per unit length contained in the system. In addition, we show that the reduced formalism constructed is well defined and consistent at least when the linear momentum in the axis direction vanishes. Furthermore, in that case we prove that there exists an infinite number of solutions in which all physical fields are constant both in the surroundings of the axis and at sufficiently large distances from it. If the global angular momentum is different from zero, the isometry group of these solutions is generally not orthogonally transitive. Such solutions generalize the metric of a spinning cosmic string in the region where no closed timelike curves are present.

National Radiological Fixed Lab Data

Data.gov (United States)

U.S. Environmental Protection Agency — The National Radiological Fixed Laboratory Data Asset includes data produced in support of various clients such as other EPA offices, EPA Regional programs, DOE,...

Decree 2006-265/PRN of 18 August 2006 fixing the modalities of mining law application

International Nuclear Information System (INIS)

2006-01-01

This decree fixes modalities of applying ordinance 93-16 of 2 march 1993 concerning mining law in Niger Republic and its subsequent modified text. Any petitioner, owner of mining title, prospecting authorization, opening and mining quarry, sub-leaser shall have an office in Niger Republic and notify it to the Minister of Mines and energy. each licence or lease is based on an agreement between the government and the society. Any change of status, capital or personnel of the company shall be noted to the Minister of Mines and energy. The company shall pay fiscal duties and respect rules and regulations concerning mines and quarries health and safety [fr

Fixed Nadir Focus Concentrated Solar Power Applying Reflective Array Tracking Method

Science.gov (United States)

Setiawan, B.; DAMayanti, A. M.; Murdani, A.; Habibi, I. I. A.; Wakidah, R. N.

2018-04-01

The Sun is one of the most potential renewable energy develoPMent to be utilized, one of its utilization is for solar thermal concentrators, CSP (Concentrated Solar Power). In CSP energy conversion, the concentrator is as moving the object by tracking the sunlight to reach the focus point. This method need quite energy consumption, because the unit of the concentrators has considerable weight, and use large CSP, means the existence of the usage unit will appear to be wider and heavier. The addition of weight and width of the unit will increase the torque to drive the concentrator and hold the wind gusts. One method to reduce energy consumption is direct the sunlight by the reflective array to nadir through CSP with Reflective Fresnel Lens concentrator. The focus will be below the nadir direction, and the position of concentrator will be fixed position even the angle of the sun’s elevation changes from morning to afternoon. So, the energy concentrated maximally, because it has been protected from wind gusts. And then, the possibility of dAMage and changes in focus construction will not occur. The research study and simulation of the reflective array (mechanical method) will show the reflective angle movement. The distance between reflectors and their angle are controlled by mechatronics. From the simulation using fresnel 1m2, and efficiency of solar energy is 60.88%. In restriction, the intensity of sunlight at the tropical circles 1KW/peak, from 6 AM until 6 PM.

Valuation of switchable tariff for wind energy

International Nuclear Information System (INIS)

Yu, Wang; Sheble, Gerald B.; Lopes, Joao A. Pecas; Matos, Manuel Antonio

2006-01-01

The current fixed tariff remuneration for wind energy is not compatible with the deregulation of the electric power industry. The time-varying and location-dependent value of renewable energy is not acknowledged. The newly announced switchable tariff for wind energy in the Spanish electricity market provides a promising solution to compensating renewable energy within the deregulated electric power industry. The new switchable tariff provides wind generators more flexibility in operating wind generation assets. Such flexibilities provide option value in coordinating the seasonality of wind energy, demand on electric power and electricity prices movement. This paper models and valuates the flexibility on switching tariff as real compound options for wind generators. Numerical examples valuate wind generation assets under fixed tariff, spot market price taking, and yearly and monthly switchable tariffs. The optimal switching strategies are identified. The impacts of the switchable tariff on sitting criteria and values of wind generation assets are investigated. An improvement on the yearly switchable tariff is suggested to further reduce the operation risk of wind generators and fully explore the efficiency provided by competitive electricity markets. (author)

H + H2 reaction barrier: A fixed-node quantum Monte Carlo study

International Nuclear Information System (INIS)

Barnett, R.N.; Reynolds, P.J.; Lester, W.A. Jr.

1985-01-01

The classical barrier height for the H+H 2 exchange reaction, as well as the energies at two other points along the reaction path, are calculated using fixed-node quantum Monte Carlo (FNQMC). Several single-determinant importance functions are used at the saddle point in order to relate the quality of the importance function to the accuracy and precision of the final result. The computed barrier is an upper bound since the energy of H and of H 2 is obtained exactly by FNQMC. Our best upper bound (9.70 +- 0.13 kcal/mol) has a mean within 0.1 kcal/mol of the presumed exact value. This best bound is obtained with a single determinant, double-zeta basis importance function. Contrary to experience with expansion methods, it is found that an importance function with a basis set of near Hartree--Fock quality, as well as one derived from a spin-unrestricted SCF calculation, are among the least efficient and least accurate of the importance functions used. Specifically, a nodal surface appearing in the lowest energy molecular orbital in these functions apparently increases the FNQMC energy. The FNQMC energy at the two other points along the reaction path is found to agree with the most accurate CI results of Liu to within statistical error

Nitrogen availability for nitrogen fixing cyanobacteria upon growth ...

African Journals Online (AJOL)

The filamentous cyanobacterium Nostoc PCC 7120 is able to convert dinitrogen to ammonia in the absence of combined nitrogen. The expression of 20% of coding sequences from all major metabolic categories was examined in nitrogen fixing and non-nitrogen fixing growth conditions. The expression data were correlated ...

NESTLE: Few-group neutron diffusion equation solver utilizing the nodal expansion method for eigenvalue, adjoint, fixed-source steady-state and transient problems

International Nuclear Information System (INIS)

Turinsky, P.J.; Al-Chalabi, R.M.K.; Engrand, P.; Sarsour, H.N.; Faure, F.X.; Guo, W.

1994-06-01

NESTLE is a FORTRAN77 code that solves the few-group neutron diffusion equation utilizing the Nodal Expansion Method (NEM). NESTLE can solve the eigenvalue (criticality); eigenvalue adjoint; external fixed-source steady-state; or external fixed-source. or eigenvalue initiated transient problems. The code name NESTLE originates from the multi-problem solution capability, abbreviating Nodal Eigenvalue, Steady-state, Transient, Le core Evaluator. The eigenvalue problem allows criticality searches to be completed, and the external fixed-source steady-state problem can search to achieve a specified power level. Transient problems model delayed neutrons via precursor groups. Several core properties can be input as time dependent. Two or four energy groups can be utilized, with all energy groups being thermal groups (i.e. upscatter exits) if desired. Core geometries modelled include Cartesian and Hexagonal. Three, two and one dimensional models can be utilized with various symmetries. The non-linear iterative strategy associated with the NEM method is employed. An advantage of the non-linear iterative strategy is that NSTLE can be utilized to solve either the nodal or Finite Difference Method representation of the few-group neutron diffusion equation

Is the Price Right? An Analysis of ETP's Fixed Fees.

Science.gov (United States)

Moore, Richard W.; Blake, Daniel R.; Honig, Michele L.; Cohen, Michael D.

The Employment Training Panel (ETP) contracted with California State University-Northridge to review the fixed fee structure ETP used to pay contractors for training provided under ETP. Three research questions were investigated: what other institutions use the fixed fee and what they pay for; whether ETP's fixed-fee rates were reasonable in…

Focusing Optics for High-Energy X-ray Diffraction

DEFF Research Database (Denmark)

Leinert, U.; Schulze, C.; Honkimäki, V.

1998-01-01

Novel focusing optical devices have been developed for synchrotron radiation in the energy range 40-100 keV. Firstly, a narrow-band-pass focusing energy-tuneable fixed-exit monochromator was constructed by combining meridionally bent Laue and Bragg crystals. Dispersion compensation was applied...

Study of consistency between (γ,xn), [(γ,n) (γ,np)] and (γ2n) reaction cross sections using data systematics

International Nuclear Information System (INIS)

Varlamov, V.V.; Ishkhanov, B.S.

2002-08-01

The majority of published data for photoneutron reaction both total and partial cross section data obtained using both bremsstrahlung and quasimonoenergetic photon beams has been analyzed systematically. The last kind data were treated separately for results obtained at USA National Lawrence Livermore Laboratory and at Centre d.Etudes Nucleaires de Saclay (France). It was found out that as a rule total photoneutron reaction cross sections obtained at Livermore differ (being smaller in amplitude) from that of other laboratories. The Saclay-Livermore data discrepancies were analyzed in details. Combined the result of this analysis with that of analysis of partial photoneutron reactions [(γ,n) + (γ,np)] and (γ,2n) cross sections balance between Livermore and Saclay data published before the following recommendation was formulated: for reliable balance of total photoneutron (γ,xn) and partial [(γ,n) + [(γ,np)] and (γ,2n) reactions cross section absolute values the Livermore (not Saclay) data must be used but multiplied to the parameter 1.122. Saclay total reaction data could be used directly but partial reaction data must be recalculated via complex procedure. (author)

Direct measurement of the inelastic neutron acceleration by 177mLu

Directory of Open Access Journals (Sweden)

Menelle A.

2010-03-01

Full Text Available The inelastic neutron acceleration (INNA cross section on the long-lived isomer state of 177mLu has been measured from a new isomeric target using a direct method. The detection of high energy neutrons has been performed using a specially designed setup and a cold neutron beam at the ORPHEE reactor facility in Saclay.

Combined GPS/GLONASS Precise Point Positioning with Fixed GPS Ambiguities

Science.gov (United States)

Pan, Lin; Cai, Changsheng; Santerre, Rock; Zhu, Jianjun

2014-01-01

Precise point positioning (PPP) technology is mostly implemented with an ambiguity-float solution. Its performance may be further improved by performing ambiguity-fixed resolution. Currently, the PPP integer ambiguity resolutions (IARs) are mainly based on GPS-only measurements. The integration of GPS and GLONASS can speed up the convergence and increase the accuracy of float ambiguity estimates, which contributes to enhancing the success rate and reliability of fixing ambiguities. This paper presents an approach of combined GPS/GLONASS PPP with fixed GPS ambiguities (GGPPP-FGA) in which GPS ambiguities are fixed into integers, while all GLONASS ambiguities are kept as float values. An improved minimum constellation method (MCM) is proposed to enhance the efficiency of GPS ambiguity fixing. Datasets from 20 globally distributed stations on two consecutive days are employed to investigate the performance of the GGPPP-FGA, including the positioning accuracy, convergence time and the time to first fix (TTFF). All datasets are processed for a time span of three hours in three scenarios, i.e., the GPS ambiguity-float solution, the GPS ambiguity-fixed resolution and the GGPPP-FGA resolution. The results indicate that the performance of the GPS ambiguity-fixed resolutions is significantly better than that of the GPS ambiguity-float solutions. In addition, the GGPPP-FGA improves the positioning accuracy by 38%, 25% and 44% and reduces the convergence time by 36%, 36% and 29% in the east, north and up coordinate components over the GPS-only ambiguity-fixed resolutions, respectively. Moreover, the TTFF is reduced by 27% after adding GLONASS observations. Wilcoxon rank sum tests and chi-square two-sample tests are made to examine the significance of the improvement on the positioning accuracy, convergence time and TTFF. PMID:25237901

Combined GPS/GLONASS Precise Point Positioning with Fixed GPS Ambiguities

Directory of Open Access Journals (Sweden)

Lin Pan

2014-09-01

Full Text Available Precise point positioning (PPP technology is mostly implemented with an ambiguity-float solution. Its performance may be further improved by performing ambiguity-fixed resolution. Currently, the PPP integer ambiguity resolutions (IARs are mainly based on GPS-only measurements. The integration of GPS and GLONASS can speed up the convergence and increase the accuracy of float ambiguity estimates, which contributes to enhancing the success rate and reliability of fixing ambiguities. This paper presents an approach of combined GPS/GLONASS PPP with fixed GPS ambiguities (GGPPP-FGA in which GPS ambiguities are fixed into integers, while all GLONASS ambiguities are kept as float values. An improved minimum constellation method (MCM is proposed to enhance the efficiency of GPS ambiguity fixing. Datasets from 20 globally distributed stations on two consecutive days are employed to investigate the performance of the GGPPP-FGA, including the positioning accuracy, convergence time and the time to first fix (TTFF. All datasets are processed for a time span of three hours in three scenarios, i.e., the GPS ambiguity-float solution, the GPS ambiguity-fixed resolution and the GGPPP-FGA resolution. The results indicate that the performance of the GPS ambiguity-fixed resolutions is significantly better than that of the GPS ambiguity-float solutions. In addition, the GGPPP-FGA improves the positioning accuracy by 38%, 25% and 44% and reduces the convergence time by 36%, 36% and 29% in the east, north and up coordinate components over the GPS-only ambiguity-fixed resolutions, respectively. Moreover, the TTFF is reduced by 27% after adding GLONASS observations. Wilcoxon rank sum tests and chi-square two-sample tests are made to examine the significance of the improvement on the positioning accuracy, convergence time and TTFF.

Heavy flavour production cross-sections from fixed target to collider energies

CERN Document Server

Wöhri, H K

2004-01-01

We review the hadro-production data presently available on charm and beauty absolute production cross-sections, collected by experiments at CERN, DESY and Fermilab. After correcting the published values, in particular for the 'time evolution' of the branching ratios, the measurements are compared to LO pQCD calculations performed with Pythia. as a function of the collision energy, using the latest parametrizations of the parton distribution functions. We then estimate, including nuclear effects on the parton densities, the charm and beauty production cross-sections relevant for future measurements at SPS, RHIC and LHC energies, in proton-proton and nucleus-nucleus collisions. We also compare some indirect charm measurements, done using leptonic decays, to the others and we briefly address the importance of beauty production as a feed-down mechanism of J/ psi production. (34 refs).

Drying kinetics characteristic of Indonesia lignite coal (IBC) using lab scale fixed bed reactor

Energy Technology Data Exchange (ETDEWEB)

Kang, TaeJin; Jeon, DoMan; Namkung, Hueon; Jang, DongHa; Jeon, Youngshin; Kim, Hyungtaek [Ajou Univ., Suwon (Korea, Republic of). Div. of Energy Systems Research

2013-07-01

Recent instability of energy market arouse a lot of interest about coal which has a tremendous amount of proven coal reserves worldwide. South Korea hold the second rank by importing 80 million tons of coal in 2007 following by Japan. Among various coals, there is disused coal. It's called Low Rank Coal (LRC). Drying process has to be preceded before being utilized as power plant. In this study, drying kinetics of LRC is induced by using a fixed bed reactor. The drying kinetics was deduced from particle size, the inlet gas temperature, the drying time, the gas velocity, and the L/D ratio. The consideration on Reynold's number was taken for correction of gas velocity, particle size, and the L/D ratio was taken for correction packing height of coal. It can be found that active drying of free water and phase boundary reaction is suitable mechanism through the fixed bed reactor experiments.

Quantum entanglement and fixed-point bifurcations

International Nuclear Information System (INIS)

Hines, Andrew P.; McKenzie, Ross H.; Milburn, G.J.

2005-01-01

How does the classical phase-space structure for a composite system relate to the entanglement characteristics of the corresponding quantum system? We demonstrate how the entanglement in nonlinear bipartite systems can be associated with a fixed-point bifurcation in the classical dynamics. Using the example of coupled giant spins we show that when a fixed point undergoes a supercritical pitchfork bifurcation, the corresponding quantum state--the ground state--achieves its maximum amount of entanglement near the critical point. We conjecture that this will be a generic feature of systems whose classical limit exhibits such a bifurcation

Elevated Fixed Platform Test Facility

Data.gov (United States)

Federal Laboratory Consortium — The Elevated Fixed Platform (EFP) is a helicopter recovery test facility located at Lakehurst, NJ. It consists of a 60 by 85 foot steel and concrete deck built atop...

Secondary emission detectors for fixed target experiments at Fermilab

International Nuclear Information System (INIS)

Drucker, R.; Ford, R.; Tassotto, G.

1998-02-01

A description of a Secondary Emission Electron Detector (SEED) is given. The SEEDs provide accurate profiles and positions at small wire spacing (125-500 mm) in a high energy, high rate environment that exceeds the capabilities of traditional segmented wire ion chambers (SWICs). This device has been designed and constructed to monitor beam position and profile of two fixed target beamlines, namely, KTeV (FNAL E-799, E-832) with an average beam sigma at target of 0.22 mm and NuTeV (FNAL E-815) with a sigma = 0.6 mm. KTeV took beam at an intensity of up to 5E12 800 GeV protons over a 20 sec spill and NuTeV received 1E13 800 GeV protons in five pings/spill

Optimal Licensing Strategy: Royalty or Fixed Fee?

OpenAIRE

Andrea Fosfuri; Esther Roca

2004-01-01

Licensing a cost-reducing innovation through a royalty has been shown to be superior to licensing by means of a fixed fee for an incumbent licensor. This note shows that this result relies crucially on the assumption that the incumbent licensor can sell its cost-reducing inno-vation to all industry players. If, for any reason, only some competitors could be reached through a licensing contract, then a fixed fee might be optimally chosen.

Gauge-fixing parameter dependence of two-point gauge-variant correlation functions

International Nuclear Information System (INIS)

Zhai, C.

1996-01-01

The gauge-fixing parameter ξ dependence of two-point gauge-variant correlation functions is studied for QED and QCD. We show that, in three Euclidean dimensions, or for four-dimensional thermal gauge theories, the usual procedure of getting a general covariant gauge-fixing term by averaging over a class of covariant gauge-fixing conditions leads to a nontrivial gauge-fixing parameter dependence in gauge-variant two-point correlation functions (e.g., fermion propagators). This nontrivial gauge-fixing parameter dependence modifies the large-distance behavior of the two-point correlation functions by introducing additional exponentially decaying factors. These factors are the origin of the gauge dependence encountered in some perturbative evaluations of the damping rates and the static chromoelectric screening length in a general covariant gauge. To avoid this modification of the long-distance behavior introduced by performing the average over a class of covariant gauge-fixing conditions, one can either choose a vanishing gauge-fixing parameter or apply an unphysical infrared cutoff. copyright 1996 The American Physical Society

DUBNA: Spin effects

International Nuclear Information System (INIS)

Anon.

1995-01-01

Full text: Earlier this year, a collaboration of Russian, Ukrainian and French laboratories measured the difference between the polarized neutron and proton total reaction rate (total cross section difference) at slightly higher energies than previous experiments, providing an interesting hint of an effect predicted by theory. This was measured using a beam of longitudinally polarized neutrons and a longitudinally polarized proton target with parallel and antiparallel polarization directions. The polarized neutron beam, from the break-up of polarized deuterons, was accelerated by the Synchrophasotron at the Joint Institute for Nuclear Research (JINR) Laboratory of High Energies, Dubna (Russian Federation). The polarized target, 20 cm long and 3 cm in diameter, provided by DAPNIA (Saclay, France) and Argonne (USA), had also been used in 1989-1990 at Fermilab for the E704 experiment. Equipment from Saclay and Argonne was shipped to Dubna and work started in June 1994. The International Association for the Promotion of Cooperation with Scientists from the Independent States of the Former Soviet Union (INTAS) supported the construction and improvement of the target in a suitable transportable form. The target was mounted in the JINR Laboratory of Nuclear Problems (LNP) by experts from DAPNIA (Saclay), JINR Dubna (LNP, LHE and Laboratory of Particle Physics - LPP), Gatchina (Russia), RASMoscow and the Kharkov (Ukraine) laboratories. The Saturne National Laboratory (Saclay), helped with computer programmes for the NMR target polarization measurements. Apparatus was tested in early February. The beam of 2 x 109 polarized deuterons produced 106 polarized neutrons at 3.6 GeV. The neutron beam polarization was about 52%. The new superconducting Nuclotron accelerator should allow the beam intensity to be increased and beam quality improved after an upgrade of the injection system. Preliminary results for the polarized neutron-proton cross section difference at neutron kinetic

Constraints of intermittent renewable energies on the management of the energy mix

International Nuclear Information System (INIS)

Percebois, J.

2017-01-01

It appears that variable renewable energies like wind energy or solar energy will have to play an important role in future energy mixes but today their place is limited by the impossibility of storing energy in great scale. In Europe wind energy and solar energy have been developed through incentive policies that have proposed guaranteed tariffs far higher than prices fixed by the energy market, the difference being paid by consumers through taxes. Now the growing importance of renewable energies implies reforming the electricity market. In France the reduction of the share of nuclear energy in power production to give more room for renewable energies is a nonsense because it means replacing a low-cost low-carbon energy by expensive low-carbon energies. Nuclear technologies are not frozen and will evolve over time in terms of more safety, more flexibility to meet the power demand and becoming less centralized to be used in new fields like urban heating or hydrogen production. (A.C.)

Fixed points of occasionally weakly biased mappings

OpenAIRE

Y. Mahendra Singh, M. R. Singh

2012-01-01

Common fixed point results due to Pant et al. [Pant et al., Weak reciprocal continuity and fixed point theorems, Ann Univ Ferrara, 57(1), 181-190 (2011)] are extended to a class of non commuting operators called occasionally weakly biased pair[ N. Hussain, M. A. Khamsi A. Latif, Commonfixed points for JH-operators and occasionally weakly biased pairs under relaxed conditions, Nonlinear Analysis, 74, 2133-2140 (2011)]. We also provideillustrative examples to justify the improvements. Abstract....

On BLM scale fixing in exclusive processes

International Nuclear Information System (INIS)

Anikin, I.V.; Pire, B.; Szymanowski, L.; Teryaev, O.V.; Wallon, S.

2005-01-01

We discuss the BLM scale fixing procedure in exclusive electroproduction processes in the Bjorken regime with rather large x B . We show that in the case of vector meson production dominated in this case by quark exchange the usual way to apply the BLM method fails due to singularities present in the equations fixing the BLM scale. We argue that the BLM scale should be extracted from the squared amplitudes which are directly related to observables. (orig.)

On BLM scale fixing in exclusive processes

Energy Technology Data Exchange (ETDEWEB)

Anikin, I.V. [JINR, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); Universite Paris-Sud, LPT, Orsay (France); Pire, B. [Ecole Polytechnique, CPHT, Palaiseau (France); Szymanowski, L. [Soltan Institute for Nuclear Studies, Warsaw (Poland); Univ. de Liege, Inst. de Physique, Liege (Belgium); Teryaev, O.V. [JINR, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); Wallon, S. [Universite Paris-Sud, LPT, Orsay (France)

2005-07-01

We discuss the BLM scale fixing procedure in exclusive electroproduction processes in the Bjorken regime with rather large x{sub B}. We show that in the case of vector meson production dominated in this case by quark exchange the usual way to apply the BLM method fails due to singularities present in the equations fixing the BLM scale. We argue that the BLM scale should be extracted from the squared amplitudes which are directly related to observables. (orig.)

Design and fabrication of the prototype superconducting quadrupole for the CERN LHC project

International Nuclear Information System (INIS)

Baze, J.M.; Cacaut, D.; Jacquemin, J.P.; Lyraud, C.; Michez, C.; Pabot, Y.; Perot, J.; Rifflet, J.M.; Toussaint, J.C.; Vedrine, P.

1992-01-01

Within the framework of the LHC R and D program, CERN and CEA/Saclay have established a collaboration to carry out, amongst others, the design, building and testing of a superconducting LHC prototype quadrupole at the Saclay laboratory. The cold mass of this quadrupole is presently under construction at Saclay. The quadrupole design features a twin aperture configuration, a gradient design features a twin aperture configuration, a gradient of 250T/m, a length of 3m and a free coil aperture of 56mm. European industries participate in this project by delivering components and fabrication the tooling according to specifications prepared by Saclay. This paper gives details of the magnet design and construction. Coil winding will start in summer 1991 and the first prototype should be assembled and ready for testing by mid 1992

Competition and facilitation between unicellular nitrogen-fixing cyanobacteria and non-nitrogen-fixing phytoplankton species

NARCIS (Netherlands)

Agawin, N.S.; Rabouille, S.; Veldhuis, M.; Servatius, L.; Hol, S.; van Overzee, H.M.J.; Huisman, J.

2007-01-01

Abstract: Recent discoveries show that small unicellular nitrogen-fixing cyanobacteria are more widespread than previously thought and can make major contributions to the nitrogen budget of the oceans. We combined theory and experiments to investigate competition for nitrogen and light between these

IR fixed points in SU(3 gauge theories

Directory of Open Access Journals (Sweden)

K.-I. Ishikawa

2015-09-01

Full Text Available We propose a novel RG method to specify the location of the IR fixed point in lattice gauge theories and apply it to the SU(3 gauge theories with Nf fundamental fermions. It is based on the scaling behavior of the propagator through the RG analysis with a finite IR cutoff, which we cannot remove in the conformal field theories in sharp contrast to the confining theories. The method also enables us to estimate the anomalous mass dimension in the continuum limit at the IR fixed point. We perform the program for Nf=16,12,8 and Nf=7 and indeed identify the location of the IR fixed points in all cases.

Kinetics of Nif gene expression in a nitrogen-fixing bacterium.

Science.gov (United States)

Poza-Carrión, César; Jiménez-Vicente, Emilio; Navarro-Rodríguez, Mónica; Echavarri-Erasun, Carlos; Rubio, Luis M

2014-02-01

Nitrogen fixation is a tightly regulated trait. Switching from N2 fixation-repressing conditions to the N2-fixing state is carefully controlled in diazotrophic bacteria mainly because of the high energy demand that it imposes. By using quantitative real-time PCR and quantitative immunoblotting, we show here how nitrogen fixation (nif) gene expression develops in Azotobacter vinelandii upon derepression. Transient expression of the transcriptional activator-encoding gene, nifA, was followed by subsequent, longer-duration waves of expression of the nitrogenase biosynthetic and structural genes. Importantly, expression timing, expression levels, and NifA dependence varied greatly among the nif operons. Moreover, the exact concentrations of Nif proteins and their changes over time were determined for the first time. Nif protein concentrations were exquisitely balanced, with FeMo cofactor biosynthetic proteins accumulating at levels 50- to 100-fold lower than those of the structural proteins. Mutants lacking nitrogenase structural genes or impaired in FeMo cofactor biosynthesis showed overenhanced responses to derepression that were proportional to the degree of nitrogenase activity impairment, consistent with the existence of at least two negative-feedback regulatory mechanisms. The first such mechanism responded to the levels of fixed nitrogen, whereas the second mechanism appeared to respond to the levels of the mature NifDK component. Altogether, these findings provide a framework to engineer N2 fixation in nondiazotrophs.

Should mobile Internet be an extension to the fixed web? Fixed-mobile reinforcement as mediator between context of use and future use

NARCIS (Netherlands)

de Reuver, M.; Ongena, G.; Bouwman, H.

2013-01-01

As the fixed and mobile Internet are converging, the question emerges whether consumers expect mobile Internet services to replicate services they know from the fixed Internet. Literature on reinforcement and displacement suggests that the use of new media depends on whether users are inclined to

ORIGINAL Some Generalized Fixed Point Results on Compact ...

African Journals Online (AJOL)

Abstract. The goal of this research is to study some generalized fixed point results in compact metric space. It mainly focuses on the existence and unique fixed point of a selfmap on a compact metric space and its generalizations. In this study iterative techniques due to. Edelstein, Bhardwaj et al. and Sastry et al. are used to ...

47 CFR 80.705 - Hours of service of Alaska-public fixed stations.

Science.gov (United States)

2010-10-01

... SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Alaska Fixed Stations § 80.705 Hours of service of Alaska-public fixed stations. Each Alaska-public fixed station whose hours of service are not... 47 Telecommunication 5 2010-10-01 2010-10-01 false Hours of service of Alaska-public fixed...

Extraction design and low energy beam transport optimization of space charge dominated multispecies ion beam sources

International Nuclear Information System (INIS)

Delferriere, O.; De Menezes, D.

2004-01-01

In all accelerator projects, the low energy part of the accelerator has to be carefully optimized to match the beam characteristic requirements of the higher energy parts. Since 1994 with the beginning of the Injector of Protons for High Intensity (IPHI) project and Source of Light Ions with High Intensities (SILHI) electron cyclotron resonance (ECR) ion source development at CEA/Saclay, we are using a set of two-dimensional (2D) codes for extraction system optimization (AXCEL, OPERA-2D) and beam transport (MULTIPART). The 95 keV SILHI extraction system optimization has largely increased the extracted current, and improved the beam line transmission. From these good results, a 130 mA D + extraction system for the International Fusion Material Irradiation Facility project has been designed in the same way as SILHI one. We are also now involved in the SPIRAL 2 project for the building of a 40 keV D + ECR ion source, continuously tunable from 0.1 to 5 mA, for which a special four-electrode extraction system has been studied. In this article we will describe the 2D design process and present the different extraction geometries and beam characteristics. Simulation results of SILHI H + beam emittance will be compared with experimental measurements

Effect of Fixed Metallic Oral Appliances on Oral Health.

Science.gov (United States)

Alnazzawi, Ahmad

2018-01-01

There is a substantial proportion of the population using fixed metallic oral appliances, such as crowns and bridges, which are composed of various dental alloys. These restorations may be associated with a number of effects on oral health with variable degrees of severity, to review potential effects of using fixed metallic oral appliances, fabricated from various alloys. The MEDLINE/PubMed database was searched using certain combinations of keywords related to the topic. The search revealed that burning mouth syndrome, oral pigmentation, hypersensitivity and lichenoid reactions, and genotoxic and cytotoxic effects are the major potential oral health changes associated with fixed prosthodontic appliances. Certain oral disorders are associated with the use of fixed metallic oral appliances. Patch test is the most reliable method that can be applied for identifying metal allergy, and the simultaneous use of different alloys in the mouth is discouraged.

ConSpeciFix: Classifying prokaryotic species based on gene flow.

Science.gov (United States)

Bobay, Louis-Marie; Ellis, Brian Shin-Hua; Ochman, Howard

2018-05-16

Classification of prokaryotic species is usually based on sequence similarity thresholds, which are easy to apply but lack a biologically-relevant foundation. Here, we present ConSpeciFix, a program that classifies prokaryotes into species using criteria set forth by the Biological Species Concept, thereby unifying species definition in all domains of life. ConSpeciFix's webserver is freely available at www.conspecifix.com. The local version of the program can be freely downloaded from https://github.com/Bobay-Ochman/ConSpeciFix. ConSpeciFix is written in Python 2.7 and requires the following dependencies: Usearch, MCL, MAFFT and RAxML. ljbobay@uncg.edu.

Fixed-time stabilization of impulsive Cohen-Grossberg BAM neural networks.

Science.gov (United States)

Li, Hongfei; Li, Chuandong; Huang, Tingwen; Zhang, Wanli

2018-02-01

This article is concerned with the fixed-time stabilization for impulsive Cohen-Grossberg BAM neural networks via two different controllers. By using a novel constructive approach based on some comparison techniques for differential inequalities, an improvement theorem of fixed-time stability for impulsive dynamical systems is established. In addition, based on the fixed-time stability theorem of impulsive dynamical systems, two different control protocols are designed to ensure the fixed-time stabilization of impulsive Cohen-Grossberg BAM neural networks, which include and extend the earlier works. Finally, two simulations examples are provided to illustrate the validity of the proposed theoretical results. Copyright © 2017 Elsevier Ltd. All rights reserved.

48 CFR 216.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 216.203 Section 216.203 Federal Acquisition Regulations System DEFENSE... CONTRACTS Fixed-Price Contracts 216.203 Fixed-price contracts with economic price adjustment. ...

Tranexamic acid-induced fixed drug eruption

Directory of Open Access Journals (Sweden)

Natsuko Matsumura

2015-01-01

Full Text Available A 33-year-old male showed multiple pigmented patches on his trunk and extremities after he took tranexamic acid for common cold. He stated that similar eruptions appeared when he was treated with tranexamic acid for influenza 10 months before. Patch test showed positive results at 48 h and 72 h by 1% and 10% tranexamic acid at the lesional skin only. To our knowledge, nine cases of fixed drug eruption induced by tranexamic acid have been reported in Japan. Tranexamic acid is a safe drug and frequently used because of its anti-fibrinolytic and anti-inflammatory effects, but caution of inducing fixed drug eruption should be necessary.

Fixed mass and scaling sum rules

International Nuclear Information System (INIS)

Ward, B.F.L.

1975-01-01

Using the correspondence principle (continuity in dynamics), the approach of Keppell-Jones-Ward-Taha to fixed mass and scaling current algebraic sum rules is extended so as to consider explicitly the contributions of all classes of intermediate states. A natural, generalized formulation of the truncation ideas of Cornwall, Corrigan, and Norton is introduced as a by-product of this extension. The formalism is illustrated in the familiar case of the spin independent Schwinger term sum rule. New sum rules are derived which relate the Regge residue functions of the respective structure functions to their fixed hadronic mass limits for q 2 → infinity. (Auth.)

The Basic Economics of Match Fixing in Sport Tournaments

OpenAIRE

Raul Caruso

2009-01-01

Match-fixing is a recurring phenomenon of sport contests. This paper presents a simple formal model in order to explain them. The intuition behind is that an asymmetry in the evaluation of the stake is the key factor leading to match-fixing or to tacit collusion. In particular, it will be demonstrated that an asymmetry in the evaluation of the stake can lead to a concession from one agent to the other and then to a match-fixing. It is also demonstrated that when the asymmetry in the evaluatio...

Analyzing and Predicting Effort Associated with Finding and Fixing Software Faults

Science.gov (United States)

Hamill, Maggie; Goseva-Popstojanova, Katerina

2016-01-01

Context: Software developers spend a significant amount of time fixing faults. However, not many papers have addressed the actual effort needed to fix software faults. Objective: The objective of this paper is twofold: (1) analysis of the effort needed to fix software faults and how it was affected by several factors and (2) prediction of the level of fix implementation effort based on the information provided in software change requests. Method: The work is based on data related to 1200 failures, extracted from the change tracking system of a large NASA mission. The analysis includes descriptive and inferential statistics. Predictions are made using three supervised machine learning algorithms and three sampling techniques aimed at addressing the imbalanced data problem. Results: Our results show that (1) 83% of the total fix implementation effort was associated with only 20% of failures. (2) Both safety critical failures and post-release failures required three times more effort to fix compared to non-critical and pre-release counterparts, respectively. (3) Failures with fixes spread across multiple components or across multiple types of software artifacts required more effort. The spread across artifacts was more costly than spread across components. (4) Surprisingly, some types of faults associated with later life-cycle activities did not require significant effort. (5) The level of fix implementation effort was predicted with 73% overall accuracy using the original, imbalanced data. Using oversampling techniques improved the overall accuracy up to 77%. More importantly, oversampling significantly improved the prediction of the high level effort, from 31% to around 85%. Conclusions: This paper shows the importance of tying software failures to changes made to fix all associated faults, in one or more software components and/or in one or more software artifacts, and the benefit of studying how the spread of faults and other factors affect the fix implementation

Finite volume QCD at fixed topological charge

OpenAIRE

Aoki, Sinya; Fukaya, Hidenori; Hashimoto, Shoji; Onogi, Tetsuya

2007-01-01

In finite volume the partition function of QCD with a given $\\theta$ is a sum of different topological sectors with a weight primarily determined by the topological susceptibility. If a physical observable is evaluated only in a fixed topological sector, the result deviates from the true expectation value by an amount proportional to the inverse space-time volume 1/V. Using the saddle point expansion, we derive formulas to express the correction due to the fixed topological charge in terms of...

47 CFR 25.277 - Temporary fixed earth station operations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Temporary fixed earth station operations. 25.277 Section 25.277 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Operations § 25.277 Temporary fixed earth station operations...

48 CFR 5416.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 5416.203 Section 5416.203 Federal Acquisition Regulations System DEFENSE LOGISTICS AGENCY, DEPARTMENT OF DEFENSE TYPES OF CONTRACTS Fixed Price Contracts 5416.203 Fixed-price...

N2-fixing red alder indirectly accelerates ecosystem nitrogen cycling

Science.gov (United States)

Perakis, Steven S.; Matkins, Joselin J.; Hibbs, David E.

2012-01-01

Symbiotic N2-fixing tree species can accelerate ecosystem N dynamics through decomposition via direct pathways by producing readily decomposed leaf litter and increasing N supply to decomposers, as well as via indirect pathways by increasing tissue and detrital N in non-fixing vegetation. To evaluate the relative importance of these pathways, we compared three-year decomposition and N dynamics of N2-fixing red alder leaf litter (2.34 %N) to both low-N (0.68 %N) and high-N (1.21 %N) litter of non-fixing Douglas-fir, and decomposed each litter source in four forests dominated by either red alder or Douglas-fir. We also used experimental N fertilization of decomposition plots to assess elevated N availability as a potential mechanism of N2-fixer effects on litter mass loss and N dynamics. Direct effects of N2-fixing red alder on decomposition occurred primarily as faster N release from red alder than Douglas-fir litter, but direct increases in N supply to decomposers via fertilization did not stimulate decomposition of any litter. Fixed N indirectly influenced detrital dynamics by increasing Douglas-fir tissue and litter N concentrations, which accelerated litter N release without accelerating mass loss. By increasing soil N, tissue N, and the rate of N release from litter of non-fixers, we conclude that N2-fixing vegetation can indirectly foster plant-soil feedbacks that contribute to the persistence of elevated N availability in terrestrial ecosystems.

Modular assembly of a photovoltaic solar energy receiver

Science.gov (United States)

Graven, Robert M.; Gorski, Anthony J.; Schertz, William W.; Graae, Johan E. A.

1978-01-01

There is provided a modular assembly of a solar energy concentrator having a photovoltaic energy receiver with passive cooling. Solar cell means are fixedly coupled to a radiant energy concentrator. Tension means bias a large area heat sink against the cell thereby allowing the cell to expand or contract with respect to the heat sink due to differential heat expansion.

Can mushrooms fix atmospheric nitrogen?

Indian Academy of Sciences (India)

Unknown

Introduction. Rhizobium is a genus of symbiotic N2-fixing soil bacteria that induce ... To produce biofilm cultures, a 2 × 2 cm yeast manitol agar. (YMA) slab was .... determination of antibiotic susceptibilities of bacterial biofilms;. J. Clin. Microbiol.

Approximate solutions of common fixed-point problems

CERN Document Server

Zaslavski, Alexander J

2016-01-01

This book presents results on the convergence behavior of algorithms which are known as vital tools for solving convex feasibility problems and common fixed point problems. The main goal for us in dealing with a known computational error is to find what approximate solution can be obtained and how many iterates one needs to find it. According to know results, these algorithms should converge to a solution. In this exposition, these algorithms are studied, taking into account computational errors which remain consistent in practice. In this case the convergence to a solution does not take place. We show that our algorithms generate a good approximate solution if computational errors are bounded from above by a small positive constant. Beginning with an introduction, this monograph moves on to study: · dynamic string-averaging methods for common fixed point problems in a Hilbert space · dynamic string methods for common fixed point problems in a metric space · dynamic string-averaging version of the proximal...

48 CFR 16.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 16.203 Section 16.203 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.203 Fixed-price...

48 CFR 1216.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 1216.203 Section 1216.203 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1216.203 Fixed...

48 CFR 416.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 416.203 Section 416.203 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 416.203 Fixed...

48 CFR 3016.203 - Fixed price contracts with economic price adjustments.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Fixed price contracts with economic price adjustments. 3016.203 Section 3016.203 Federal Acquisition Regulations System DEPARTMENT OF... TYPES OF CONTRACTS Fixed-Price Contracts 3016.203 Fixed price contracts with economic price adjustments. ...

48 CFR 616.203 - Fixed-Price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Fixed-Price contracts with economic price adjustment. 616.203 Section 616.203 Federal Acquisition Regulations System DEPARTMENT OF STATE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 616.203 Fixed...

48 CFR 1316.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 1316.203 Section 1316.203 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1316.203 Fixed...

Fixed drug eruption resulting from fluconazole use: a case report

Directory of Open Access Journals (Sweden)

Tavallaee Mahkam

2009-07-01

Full Text Available Abstract Introduction Fluconazole is a widely used antifungal agent with a possible side effect of fixed drug eruption. However, this adverse drug effect is absent from the reported list of possible side effects of fluconazole. We are presenting a rare case in our report. Case presentation A 25-year-old Iranian woman developed fixed drug eruptions on different sites of her body after taking five doses of fluconazole to treat vaginal candidiasis. A positive patch test, positive oral challenge test and skin biopsy were all found to be consistent with fixed drug eruption. Conclusion Fluconazole is a widely prescribed drug, used mainly to treat candidiasis. Fixed drug eruption as a possible side effect of Fluconazole is not well known and thus, the lesions may be misdiagnosed and mistreated. Based on our findings, which are consistent with a number of other practitioners, we recommend adding fixed drug eruption to the list of possible side effects of fluconazole.