WorldWideScience

Sample records for fire extinguisher powder

  1. Suicide by Fire Extinguisher Powder Ingestion: A Case Report

    Directory of Open Access Journals (Sweden)

    Hamid Mohammadi Kojidi

    2017-07-01

    Full Text Available A 51-year-old man committed suicide by swallowing the contents of a fire extinguisher. A few hours after his suicide attempt, he was referred to the medical center for poisoning. At the time of admission, the patient was conscious with stable vital signs. The patient complained of burning lips and mouth, mentioning diarrhea. Initial treatments included gastric lavage with activated charcoal, while paraclinical measures were requested. The patient had undergone hypernatremia (Na: 152 mEq/l and metabolic alkalosis. Treatment focused on the adjustment of sodium level and alkalosis. On the first day of hospitalization, the patient experienced recurrent episodes of tonic-clonic seizure along with the loss of consciousness. On the third day of hospitalization, the patient developed respiratory arrest followed by cardiac arrest and death.

  2. 14 CFR 29.851 - Fire extinguishers.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Fire Protection § 29.851 Fire extinguishers. (a) Hand fire extinguishers. For hand fire extinguishers the following apply: (1) Each hand...

  3. 14 CFR 25.851 - Fire extinguishers.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Fire Protection § 25.851 Fire extinguishers. (a) Hand fire extinguishers. (1) The following minimum number of hand fire extinguishers must be... 6 501 through 600 7 601 through 700 8 (2) At least one hand fire extinguisher must be...

  4. 14 CFR 23.851 - Fire extinguishers.

    Science.gov (United States)

    2010-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Fire Protection § 23.851 Fire extinguishers. (a) There must be at least one hand fire extinguisher for use in the... least one hand fire extinguisher located conveniently in the passenger compartment— (1) Of each...

  5. Lab Fire Extinguishers: Here Today, Gone Tomorrow?

    Science.gov (United States)

    Roy, Ken

    2010-01-01

    When renovations or new construction occur, fire extinguishers sometimes get lost in the mix. Unfortunately, whether to save money or because the fire code is misinterpreted, some schools do not install fire extinguishers in laboratories and other areas of the building. Let's set the record straight! If flammables are present, the fire code…

  6. Lab Fire Extinguishers: Here Today, Gone Tomorrow?

    Science.gov (United States)

    Roy, Ken

    2010-01-01

    When renovations or new construction occur, fire extinguishers sometimes get lost in the mix. Unfortunately, whether to save money or because the fire code is misinterpreted, some schools do not install fire extinguishers in laboratories and other areas of the building. Let's set the record straight! If flammables are present, the fire code…

  7. Research on Foam-dry Powder Fire Extinguishing and Its Application%泡沫、干粉联用灭火的研究和应用

    Institute of Scientific and Technical Information of China (English)

    邵大财; 张世凤

    2013-01-01

    泡沫-干粉联用灭火装置具有泡沫、干粉二种手段的独立作战能力,其主要功能是依靠泡沫和干粉两种手段的联合应用,以扑救易燃液体和气体的火灾,尤其适用扑救野外露天野战油库的火灾.联合使用这两种手段可以相互弥补,扬长避短,使灭火战斗力得到明显提高.%Foam-dry powder fire extinguishing device has two independent operational capabilities of foam and dry powder file fighting, and is used to put out flammable liquid or gas fire, especially the fire of wild and outdoor oil depot. The combination use of the two methods can make up for each other effectively and improve the fire fighting capacity obviously.

  8. 超细干粉灭火系统应用于加油站火灾防控初探%Pre-test of Fire Prevention and Control of Gas Station Using Super Fine Powder Fire Extinguishing System

    Institute of Scientific and Technical Information of China (English)

    谢树俊; 宋文华; 丁旭东; 徐昕; 张俪昽

    2011-01-01

    Aiming at the fast spread speed and the strong fire behavior of gas station fire, the traditional mobile, cart-type dry powder and foam extinguishers can not meet the requirements of gas station fire safety situation. Based on "Code of design,Construction and Acceptance for Super fine powder extinguish system ","super fine powder fire extinguishing system design, construction and acceptance specification" and other related standards, combined with the gas station engineering design requirements and the characteristics of fire hazards, the design principles of gas station by using super fine powder fire extinguishing system for fire fighting and initial control was given. Take a gas station in Tianjin as an example, using the given design principles to the fire control system of its key fire danger area's design, the equipment selection and system capability evaluation were given. Under the given condition, compared with the gas station fire equipment based on the standards, design selection of super fine powder fire extinguishing facilities is equipped with simple, flexible and convenient advantages, and also remarkable extinguishing effect. It can also maximize the attack speed and minimizing the risk of fighting and casualties, the gas station's capability of prevention and control of sudden fire has been significantly upgraded.%针对加油站火灾起火速度快、火势猛,传统的手提、推车式干粉及泡沫灭火器不能满足加油站消防安全要求的实际情况,依据《汽车加油加气站设计与施工规范》、《超细干粉灭火系统设计、施工及验收规范》等相关标准,结合加油站工程设计的要求和火灾隐患的特点,给出加油站采用超细干粉灭火系统用于火灾扑救与初期控制时,设计应遵循的原则.以天津某加油站为例,利用给出的设计原则对其重点火灾隐患部位的消防系统进行了设计、设备选型与系统消防能力评估,在给定的条件下,选用超

  9. 46 CFR 118.410 - Fixed gas fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fixed gas fire extinguishing systems. 118.410 Section... PROTECTION EQUIPMENT Fixed Fire Extinguishing and Detecting Systems § 118.410 Fixed gas fire extinguishing systems. (a) General. (1) A fixed gas fire extinguishing system aboard a vessel must be approved by...

  10. 46 CFR 181.410 - Fixed gas fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Fixed gas fire extinguishing systems. 181.410 Section... Fixed gas fire extinguishing systems. (a) General. (1) A fixed gas fire extinguishing system aboard a... approved for the system by the Commandant. (4) A fixed gas fire extinguishing system may protect more...

  11. 46 CFR 28.320 - Fixed gas fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Fixed gas fire extinguishing systems. 28.320 Section 28..., 1991, and That Operate With More Than 16 Individuals on Board § 28.320 Fixed gas fire extinguishing...) or more in length must be fitted with a fixed gas fire extinguishing system in the following...

  12. Using egg albumin foam to extinguish fires

    Directory of Open Access Journals (Sweden)

    Hytham A. Alsaati

    2003-12-01

    Full Text Available Oil, coal and chemical fires are often difficult to put out using water. In certain hydrocarbon fires, protein foam can extinguish fires better than water by keeping air (oxygen away from the flames and by ''blowing'' the flame away from its fuel source. Egg albumin is a relatively inexpensive protein and is representative of foaming proteins, which are candidates for use as fire suppression agents. This paper begins to deal with the effect of the foam bulk pH, foam protein concentration and generating air flow rate into the foam on the fire extinguishing time in laboratory experiments. A Bunsen burner was used to generate a small, controlled laboratory fire within a plastic container, which represented a point source in a partially open room in the experiments. The Bunsen burner represents a gaseous hydrocarbon fire, which can be difficult to extinguish. Both a low pH foam and one made with a high air flow rate favor a reduction in time required to put out the Bunsen burner flame.Chamas produzidas por óleo, carvão e produtos químicos (incêndios provocados são difíceis de ser extinguidos com água. Algumas chamas de hidrocarbonetos podem ser extinguidas por espumas protéicas melhor do que a manutenção de ar (oxigênio fora do alcance das chamas ou pelo sopramento da chama para longe da sua fonte. Albumina de ovo é uma proteína relativamente barata e é representativa dentre as proteínas usadas como espuma para a (supressão extinção de agentes causadores de incêndio. Este artigo trata do estudo do efeito do pH e concentração da espuma protéica, além da geração de ar no interior da espuma, sobre o tempo de extinção de incêndio em experimentos laboratoriais. Nos experimentos um bico de Bunsen foi usado para gerar uma pequena chama, controlada em um container de plástico, representando uma fonte pontual em um ambiente parcialmente aberto. A chama do bico de Bunsen representa uma chama gasosa de hidrocarbonetos, que são dif

  13. Methods to Compose Sodium Fire Extinguishing Equipment on Sodium Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Kim, B. H.; Kim, J. M.; Jeong, J. Y.; Choi, B. H

    2008-06-15

    Sodium fire is graded 'D' and it is difficult to extinguish sodium fire. In this report, the characteristics of sodium fire and the methods composing the suitable fire extinguishing systems to suppress fire effectively were described.

  14. Incidental Reflector Comparison of Containerized Dry Fire Extinguishing Agents

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Bryan Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wysong, Andrew Russell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-14

    This document addresses the incidental reflector reactivity worth of containerized fire extinguishing agents authorized for use in PF-4 at Los Alamos National Laboratory (LANL). The intent of the document is to analyze dry fire extinguishing agent that remains in a container and is not actively being used in a fire emergency. The incidental reflector reactivity worth is determined by comparison to various thicknesses of close fitting water reflection which is commonly used to bound incidental reflectors in criticality safety evaluations. The conclusion is that even in unlimited quantities, when containerized the authorized dry fire extinguishing agents are bound by 0.4 inches of close fitting water.

  15. 46 CFR 118.420 - Pre-engineered fixed gas fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pre-engineered fixed gas fire extinguishing systems. 118... gas fire extinguishing systems. (a) A pre-engineered fixed gas fire extinguishing system must: (1) Be... manufacturer's instructions. (b) A vessel on which a pre-engineered fixed gas fire extinguishing system...

  16. Modification of ADP extinguishing powder by siliconization in spray drying

    Institute of Scientific and Technical Information of China (English)

    Xiaojing Zhang; Zhigang Shen; Chujiang Cai; Xiaozheng Yu; Jun Du; Yushan Xing; Shulin Ma

    2012-01-01

    Superfine spherical fire-extinguishing powder,ammonium dihydrogen phosphate (ADP,NH4H2PO4),was prepared by spray drying and modified in situ with methyl hydrogen silicone oil (MHSO) emulsion and the fluorinated surfactant FK-510.The influences of the MHSO mass ratio on the hydrophobicity,surface composition,surface morphology,dispersion and particle-size distribution of the NH4H2PO4 were studied,and the influence of the drying air temperature on the decomposition of the NH4H2PO4 was also researched.The results indicate that the MHSO and FK-510 congregate on the particle surfaces and then form a hydrophobic shell.This shell improves the particle hydrophobicity and leads to a fine dispersion of the particles.During the process of preparing the precursor solution,3 wt% (based on the weight of NH4H2PO4) was chosen as the optimum value of the MHSO mass ratio.During the spray drying,a low absolute humidity of the air should be maintained,and it is very important to keep the exit-air temperature below 100℃ to avoid decomposition.

  17. Control and extinguishment of LPG fires. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Approximately 100 fire control and fire extinguishment tests were run on free-burning LPG pool fires from 25 ft/sup 2/ to 1600 ft/sup 2/ in area. The LPG was contained in concrete pits, and the pit floors were allowed to cool before the fires were ignited so that the burning rates were not influenced by boiloff from the warm floor. High expansion foam was used for fire control. The foam was applied from fixed generators located on the upwind side of the pit. Fires were controlled after foam application of less than a minute to about 10 minutes, depending on the application rate. Fires were extinguished with dry chemical agents applied through fixed piping systems with tankside nozzles and by manual application using hoselines and portable extinguishers. Fires could readily be extinguished in times ranging from a few seconds to about half a minute, depending on the application rate, system design, and ambient conditions. Additional tests were conducted in 1-ft/sup 2/ and 5-ft/sup 2/ pits to determine the boiloff rates for LPG spilled on concrete, a sand/soil mix, and polyurethane foam substrates. Burning rates for free-burning LPG pool fires from 1 ft/sup 2/ to 1600 ft/sup 2/ in area are also reported.

  18. Control and extinguishment of LPG fires. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.W.; Martinsen, W.E.; Cavin, W.D.; Chilton, P.D.; Lawson, H.P.; Welker, J.R.

    1980-08-01

    Approximately 100 fire control and fire extinguishment tests were run on free-burning liquefied petroleum gases (LPG) pool fires from 25 ft/sup 2/ to 1600 ft/sup 2/ in area. The LPG was contained in concrete pits, and the pit floors were allowed to cool before the fires were ignited so that the burning rates were not influenced by boiloff from the warm floor. High expansion foam was used for fire control. The foam was applied from fixed generators located on the upwind side of the pit. Fires were controlled after foam application of less than a minute to about 10 minutes, depending on the application rate. Fires were extinguished with dry chemical agents applied through fixed piping systems with tankside nozzles and by manual application using hoselines and portable extinguishers. Fires could readily be extinguished in times ranging from a few seconds to about half a minute, depending on the application rate, system design, and ambient conditions. Additional tests were conducted in 1-ft/sup 2/ and 5-ft/sup 2/ pits to determine the boiloff rates for LPG spilled on concrete, a sand/soil mix, and polyurethane foam substrates. Burning rates for free-burning LPG pool fires from 1 ft/sup 2/ to 1600 ft/sup 2/ in area are also reported.

  19. 46 CFR 193.05-10 - Fixed fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... of the foam system shall be as set forth in part 95 of Subchapter I (Cargo and Miscellaneous Vessels) of this chapter. (f) Where an enclosed ventilating system is installed for electric propulsion motors... VESSELS FIRE PROTECTION EQUIPMENT Fire Detecting and Extinguishing Equipment, Where Required §...

  20. 46 CFR 181.420 - Pre-engineered fixed gas fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pre-engineered fixed gas fire extinguishing systems. 181... § 181.420 Pre-engineered fixed gas fire extinguishing systems. (a) A pre-engineered fixed gas fire... (a)(3) of this section. (c) Only one pre-engineered fixed gas fire extinguishing system is allowed...

  1. Fire Extinguisher Designated Worker and Fire Watch: Self-Study Course 15672

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Jimmy D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-08

    At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code of Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.

  2. Fire Extinguisher Training for Fire Watch and Designated Workers, Course 9893

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Jimmy D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-19

    At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code of Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.

  3. 46 CFR 132.310 - Fixed fire-extinguishing systems for paint lockers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fixed fire-extinguishing systems for paint lockers. 132... lockers. (a) Except as provided by paragraph (b) of this section, a fixed gaseous fire-extinguishing system or another approved fixed fire-extinguishing system must be installed in each paint locker. (b)...

  4. 33 CFR 149.405 - How are fire extinguishers classified?

    Science.gov (United States)

    2010-07-01

    ... thick flammable substances where a blanketing effect is essential; and (3) “C” for fires in electrical... set forth in table 149.405. Table 149.405—Portable and Semi-Portable Extinguishers Classification type-size Foam liters(gallons) Carbon dioxidekilograms (pounds) Dry chemical kilograms(pounds) A-II 9.5...

  5. Water evaporation particularities in the process of forest fire extinguishing

    Directory of Open Access Journals (Sweden)

    Strizhak Pavel A.

    2015-01-01

    Full Text Available Numerical simulation of water massif motion through the high temperature gases corresponding to the typical conditions of forest fires was carried out. Maximal values of part by volume of liquid evaporating from water massif under its motion through the flaming burning area were determined when solving the heat and mass transfer problem under the conditions of endothermic phase transformations. Influence of liquid phase transition heat on the heat and mass transfer conditions on the track of water massif was determined. The expediency of polydisperse interspaced in time and space atomization of water massifs under the large-scale (especially, forest fires fire extinguishing was proved.

  6. 30 CFR 77.1111 - Welding, cutting, soldering; use of fire extinguisher.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Welding, cutting, soldering; use of fire... OF UNDERGROUND COAL MINES Fire Protection § 77.1111 Welding, cutting, soldering; use of fire extinguisher. One portable fire extinguisher shall be provided at each location where welding, cutting,...

  7. Assessment of latest technology in coal refuse fire extinguishment

    Energy Technology Data Exchange (ETDEWEB)

    Maneval, D.R.

    1976-05-01

    It is easier, cheaper, and less hazardous to prevent fires in coal refuse banks than to extinguish them. This can be done by compacting in thin layers (to reduce air and air flow), sealing edges with various materials (crushed linestone is good, it gives off CO/sub 2/ when heated), etc. In particular the tippler form of pile construction should be avoided. Once these piles do ignite (by spontaneous combustion or other means), it is often difficult and hazardous (gases, explosions, unsafe regions, etc) to work at extinguishing them. Various methods are given. Once the fire is put out, the pile should be reworked, compacting and sealing it, so the process does not start again. (LTN)

  8. Public access defibrillators and fire extinguishers: are comparisons reasonable?

    Science.gov (United States)

    Mell, Howard K; Sayre, Michael R

    2008-01-01

    Sudden cardiac death is a major cause of mortality in the United States of America (Circulation 2008;117:e25-146) with approximately 310000 deaths related to coronary heart disease occurring in emergency departments or in the prehospital environment annually. Several organizations have directed resources toward the treatment of sudden cardiac arrest through a paradigm that has come to be known as the "chain of survival"-prompt activation of emergency response by telephone 911, early bystander cardiopulmonary resuscitation, early defibrillation, and timely advanced cardiac life support (Circulation 1991;83:1832-1847). The ready availability of automated external defibrillators (AEDs) has been advocated as a key component of this chain. Some authors have suggested a "fire extinguisher model" for AED deployment (Circulation 1998;98:2334-2351; Resuscitation 1995;30:151-156; Ann Intern Med 2001;135:990-998). In this model, AEDs are prominently displayed in public places for use by laypersons, much like fire extinguishers. For example, in Chicago's O'Hare Airport, AEDs are placed alongside fire extinguishers in the public concourse (N Engl J Med 2002;347:1242-1247). Advocates of this model suggest that advancing this practice would be a means to widely disbourse life-saving technology that is easy to use. Several experts have questioned this model, suggesting that the cost-effectiveness of distributing AEDs this widely would be prohibitive (BMJ 2002;325:515; Curr Opin Cardiol 2007;22:5-10; BMJ 2003;326:162; Int J Technol Assess Health Care 2007;23:362-367) and may not be more effective than more targeted distribution of AEDs. This literature review will examine the available data on both AEDs and fire extinguishers to determine if these comparisons are reasonable as a means of guiding public policy.

  9. Binary fire-extinguishing agent composed of halocarbons and inert gases

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    C3H2F3Br (1323) is a new kind of Halon replacements developed by our research group. In order to improve the disperse capability of 1323, nitrogen was mixed with 1323 to form the binary fire-extinguishing agent. In this work, the binary fire-extinguishing agent of nitrogen and 1323 was used in experiment and the fire extinguishing efficiency was discussed. In addition, the fire suppression mechanism was investigated and the fire-extinguishing concentration of nitrogen and 1323 was also studied.

  10. Extinguishing smouldering fires in silos. BRANDFORSK project 745-961

    Energy Technology Data Exchange (ETDEWEB)

    Tuomisaari, M.; Baroudi, D.; Latva, R. [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1998-11-01

    Combustible, porous materials may self-ignite during their storage time in silos as a result of internal heating. The self-ignition process may be slow, and it results in smouldering fires that are extremely difficult to extinguish. Suitable means to fight the smouldering fire were studied both theoretically and experimentally. General heat and mass transfer equations for porous media subject to fires and suppression were written. The equations together with dimensional analysis revealed critical parameters, like the grain size and moisture content, affecting the combustion and suppression process, but they also revealed the complexity of the problem. Experimental results of over 50 tests with varying combustibles and suppression agents were used as the basis for proposed qualitative guidelines on how to fight a smouldering silo fire. Among the potential gaseous agents, CO{sub 2} was found to be the most efficient one. Low expansion foam was also found to be a potential candidate, but its applicability requires further confirmation. Quantifying the guidelines requires a whole new study on the detection of a smouldering fire. The same detection system should be capable of monitoring the suppression process and - most importantly - verifying the extinguishment. (orig.) 46 refs.

  11. Extinguishment of enclosed gas fires with water sprays

    Science.gov (United States)

    Wighus, R.

    1993-02-01

    Water sprays are widely used for fire fighting in industrial areas, and they are used for fire protection in the process industry and at offshore oil- and gas-production platforms. No real quantification of the effect of water sprays as a fire fighting medium exists. The water delivery is specified through standards and regulations which are based on industrial experience. In process areas, water spray is often used in deluge systems, intended to control the fire until the leakage of fuel has been shut down. For this purpose, there is a need for quantification of the ability a certain spray system has to remove heat from the fire and to reduce the fire load to the construction and process equipment. SINTEF NBL has studied extinguishment and control of enclosed hydrocarbon fires by means of water sprays. A scale model of a module of an offshore platform is used in studies of enclosed liquid hydrocarbon fire development. The model is instrumented to measure heat transfer, fire development, and production of soot and gases from combustion.

  12. Synthesis and characterization of carbon microsphere for extinguishing sodium fire

    Science.gov (United States)

    Snehalatha, V.; Ponraju, D.; Nashine, B. K.; Chellapandi, P.

    2013-06-01

    In Sodium cooled Fast breeder Reactors (SFRs), accidental leakage of liquid sodium leads to sodium fire. Carbon microsphere is a promising and novel extinguishant for sodium fire since it possesses high thermal conductivity, chemical inertness and excellent flow characteristics. Low density Carbon microsphere (CMS) with high thermal stability was successfully synthesized from functionalized styrene divinyl benzene copolymer by carbonization under inert atmosphere. Protocol for stepwise carbonization was developed by optimizing heating rate and time of heating. The synthesized CMS was characterized by Densimeter, Scanning Electron Microscope (SEM), Fourier Transfer Infra-Red spectroscopy (FTIR), Thermogravimetry (TG), X-ray Diffraction (XRD) and RAMAN spectroscopy. CMS thus obtained was spherical in shape having diameters ranging between 60 to 80μm with narrow size distribution. The smooth surface of CMS ensures its free flow characteristics. The yield of carbonization process was about 38%. The performance of CMS was tested on small scale sodium. This paper describes the development of carbon microsphere for extinguishing sodium fire and its characteristics.

  13. 某泥塑殿消防设施方案选择分析%Analysis on the design plan of some clay hall's fire extinguishing system

    Institute of Scientific and Technical Information of China (English)

    王巍

    2013-01-01

    Against the decision of fire extinguishing system for some clay hall of national key cultural relics protection units,choose 4 index including fire extinguishing effect,secondary disaster,difficulty of installation and maintain,quantity of structural renovation project,and use risk assessment and fuzzy mathematics to analyze 4 common fire extinguishing system.Results showed that the most suitable one is ABC fine dry powder fire extinguishing system,and then IG541 gas fire extinguishing system,automatic sprinkler system,and ordinary ABC dry powder fire extinguishing system.After considering the protection of cultural relics,decide to choose cabinet fine dry powder fire extinguishing system,and fire control methods were put forward.%针对某全国重点文物保护单位泥塑殿拟选用的灭火系统,选择灭火效果、灭火系统产生的次生灾害、安装维护难度、结构改造工程量4个指标,应用风险评价方法和模糊数学理论对4种常见灭火系统进行分析得知,最适用于大殿的灭火系统是ABC超细干粉灭火系统,其次是IG541气体灭火系统、自动喷水预作用系统、普通ABC干粉灭火系统.进一步考虑文物保护等因素,指出大殿宜选择柜式ABC超细干粉灭火装置,并提出了现阶段大殿火灾防控措施.

  14. 46 CFR 147.65 - Carbon dioxide and halon fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Carbon dioxide and halon fire extinguishing systems. 147... dioxide and halon fire extinguishing systems. (a) Carbon dioxide or halon cylinders forming part of a...) Carbon dioxide or halon cylinders must be rejected for further service when they— (1) Leak; (2)...

  15. Experimental study on fire extinguishing with a newly prepared multi-component compressed air foam

    Institute of Scientific and Technical Information of China (English)

    WANG XiShi; LIAO YaoJian; LIN Lin

    2009-01-01

    A multi-component compressed air foam system (MCAFS) was developed with newly prepared multi-component foaming agents. Extinguishing of wood crib and oil pool fires was performed under different conditions, such as foam concentration, mixing chamber forepart structure and working pressure. It was found that the foam concentration had sufficient effects on fire extinguishing efficiency, and an optimized concentration value exists. For instance, for diesel oil pool fires, this value is about 2.2% while it is about 4.0% for wood crib fires. The results also show that the system with a coaxial mixing chamber has greater efficiency than a T-shape. The effects of working pressure on fire extin-guishing are evident in experiments, i.e., the higher the working pressure is, the more readily the fire is extinguished.

  16. A Novel Camera Based Mobile Robot With Obstacle Avoidance And Fire Extinguish Control

    Directory of Open Access Journals (Sweden)

    S.Vivekanadan

    2016-04-01

    Full Text Available The project is based on mobile wireless robot technology that performs the dual operation as obstacle avoidance and fire extinguish. The sensors used here are ultrasonic sensor for obstacle avoidance and flame sensor to detect the fire. Here, the signals are received by an Arduino board for controlling the robot. The motor drives are used to drive the robot. A wireless monitoring system is used to display the present scenario.in detail It is a robot that autonomously detects and extinguish fire. It uses flame sensor for detection of fire, also ultrasonic sensor to detect obstacles and Arduino board for processing. The Fire extinguisher along with actuator is used to extinguishing the fire which is been detected. The robot continuously scans for fire. This scanning is performed by Flame sensors placed on the sides When a fire is detected, it moves in the direction of fire and stops in front of it and trigger the extinguisher to turn out the fire.In order to achieve the extinguish process a robot has arm with Electronic valve and a motor is used along with the body to change the angle of the arm. This arm and motor can be controlled by the Arduino. The power source for the robot comes from a battery.

  17. Developing Standards to Qualify a Fine Water Mist Fire Extinguisher for Human Spaceflight

    Science.gov (United States)

    Graf, John

    2011-01-01

    NASA is developing a Fine Water Mist Portable Fire Extinguisher for use on the International Space Station. The International Space Station presently uses two different types of fire extinguishers: a water foam extinguisher in the Russian Segment, and a carbon dioxide extinguisher in the US Segment and Columbus and Kibo pressurized elements. Changes in emergency breathing equipment make Fine Water Mist operationally preferable. Supplied oxygen breathing systems allow for safe discharge of a carbon dioxide fire extinguisher, without concerns of the crew inhaling unsafe levels of carbon dioxide. But the Portable Breathing Apparatus offers no more than 15 minutes of capability, and continued use of hose based supplied oxygen systems increases the oxygen content in a fire situation. NASA has developed a filtering respirator cartridge for use in a fire environment. It is qualified to provide up to 90 minutes of capability, and because it is a filtering respirator it does not add oxygen to the environment. The fire response respirator cartridge does not filter carbon dioxide, so a crew member discharging a CO2 fire extinguisher while wearing this filtering respirator would be at risk of inhaling unsafe levels of CO2. Fine Water Mist extinguishes a fire without creating a large volume of air with reduced oxygen and elevated CO2. Compared to the carbon dioxide based Portable Fire Extinguisher, the flight qualification of Fine Water Mist systems requires special care. Qualification of the CO2 based Portable Fire Extinguisher began with the assumption that any fire on ISS would be extinguished if the air in the fire environment reached a critical concentration of CO2. Qualification of a CO2 based system requires the developers to make assertions and assumptions about vehicle geometry and the ability of the extinguisher to deliver CO2 in different geometric configurations, but the developers did not need to make assertions or assumptions about the size of the fire, the

  18. Analysis of the Earthquake Impact towards water-based fire extinguishing system

    Science.gov (United States)

    Lee, J.; Hur, M.; Lee, K.

    2015-09-01

    Recently, extinguishing system installed in the building when the earthquake occurred at a separate performance requirements. Before the building collapsed during the earthquake, as a function to maintain a fire extinguishing. In particular, the automatic sprinkler fire extinguishing equipment, such as after a massive earthquake without damage to piping also must maintain confidentiality. In this study, an experiment installed in the building during the earthquake, the water-based fire extinguishing saw grasp the impact of the pipe. Experimental structures for water-based fire extinguishing seismic construction step by step, and then applied to the seismic experiment, the building appears in the extinguishing of the earthquake response of the pipe was measured. Construction of acceleration caused by vibration being added to the size and the size of the displacement is measured and compared with the data response of the pipe from the table, thereby extinguishing water piping need to enhance the seismic analysis. Define the seismic design category (SDC) for the four groups in the building structure with seismic criteria (KBC2009) designed according to the importance of the group and earthquake seismic intensity. The event of a real earthquake seismic analysis of Category A and Category B for the seismic design of buildings, the current fire-fighting facilities could have also determined that the seismic performance. In the case of seismic design categories C and D are installed in buildings to preserve the function of extinguishing the required level of seismic retrofit design is determined.

  19. Wireless Sensor Network based Fire Monitoring and Extinguishing System in Real Time Environment

    Directory of Open Access Journals (Sweden)

    P. N. Narendra Reddy

    2011-09-01

    Full Text Available Firefighting is one of the most dangerous professions in which people are employed. The dangers associated are the result of a number of factors such as lack of information regarding the location, size and spread of the fire. The use of wireless sensor networks may be one way of reducing the risks faced by the firefighters and assist in the process of rapid extinguishment of the fire. The standards, such as IEEE 802.15.4 and ZigBee, stimulated the development of numerous commercial products. Moving from early research in military applications, sensor networks now are widely deployed in diverse applications including home automation, building automation, and others. This paper mainly presents the design and the implementation of wireless sensor network based fire monitoring and extinguishing system. Fire monitoring system continuously monitors the surroundings and keeps a track of the temperature recorded and the intruders detected, performed by monitoring node. Fire extinguishing system switches the extinguisher as soon as it detects the fire or when the temperature crosses a certain threshold level, performed by extinguishing node. Results indicate that the overall performance of the proposed approach is very good. The usage of zigbee monitored fire extinguishers in a hospital building has been demonstrated.

  20. Development and testing of dry chemicals in advanced extinguishing systems for jet engine nacelle fires

    Science.gov (United States)

    Altman, R. L.; Ling, A. C. (Editor); Mayer, L. A.; Myronik, D. J.

    1979-01-01

    The effectiveness of dry chemical in extinguishing and delaying reignition of fires resulting from hydrocarbon fuel leaking onto heated surfaces such as can occur in jet engine nacelles is studied. The commercial fire extinguishant dry chemical tried are sodium and potassium bicarbonate, carbonate, chloride, carbamate (Monnex), metal halogen, and metal hydroxycarbonate compounds. Synthetic and preparative procedures for new materials developed, a new concept of fire control by dry chemical agents, descriptions of experiment assemblages to test dry chemical fire extinguishant efficiencies in controlling fuel fires initiated by hot surfaces, comparative testing data for more than 25 chemical systems in a 'static' assemblage with no air flow across the heated surface, and similar comparative data for more than ten compounds in a dynamic system with air flows up to 350 ft/sec are presented.

  1. 75 FR 20516 - Special Conditions: Cirrus Design Corporation, Model SF50; Fire Extinguishing for Upper Aft...

    Science.gov (United States)

    2010-04-20

    ...; Fire Extinguishing for Upper Aft Fuselage Mounted Engine AGENCY: Federal Aviation Administration (FAA... the postcard and mail it back to you. Background On September 9, 2008, Cirrus Design Corporation... protect such installed engines from fires, were not envisioned in the development of the part 23...

  2. AT89S52 microcontroller Based A Fire Extinguisher Robot Using Ultrasonic and Ultraviolet Sensor

    Directory of Open Access Journals (Sweden)

    Wahyu Sapto Aji

    2009-12-01

    Full Text Available The fire often takes many victims. Fire detection system sometime can not prevent this from happening. Therefore, it is essential to develop a robot that can detect the present of fire as well as extinguish it. This research aimed to design a fire extinguisher robot using AT89S52 microcontroller as its controller. A DC fan controlled by a relay is utilized to put out the fire and a fire sensor (UV-Tron is used to detect the presence of fire. The movement of the robot is driven by motor DC. The robot can detect the surrounding obstacles and possess an ultrasound-based navigation system. If the ultrasound system detects an obstacle, the robot will automatically turn without colliding the obstacle or other things around it. The result has shown that this fire extinguisher robot can be built using hardware and software controlled by an AT89S52 microcontroller. It can be concluded from the tests that the robot can detect fire as far as 5 meter distance and able to successfully put out the fire.

  3. Fire Extinguisher Robot Using Ultrasonic Camera and Wi-Fi Network Controlled with Android Smartphone

    Science.gov (United States)

    Siregar, B.; Purba, H. A.; Efendi, S.; Fahmi, F.

    2017-03-01

    Fire disasters can occur anytime and result in high losses. It is often that fire fighters cannot access the source of fire due to the damage of building and very high temperature, or even due to the presence of explosive materials. With such constraints and high risk in the handling of the fire, a technological breakthrough that can help fighting the fire is necessary. Our paper proposed the use of robots to extinguish the fire that can be controlled from a specified distance in order to reduce the risk. A fire extinguisher robot was assembled with the intention to extinguish the fire by using a water pump as actuators. The robot movement was controlled using Android smartphones via Wi-fi networks utilizing Wi-fi module contained in the robot. User commands were sent to the microcontroller on the robot and then translated into robotic movement. We used ATMega8 as main microcontroller in the robot. The robot was equipped with cameras and ultrasonic sensors. The camera played role in giving feedback to user and in finding the source of fire. Ultrasonic sensors were used to avoid collisions during movement. Feedback provided by camera on the robot displayed on a screen of smartphone. In lab, testing environment the robot can move following the user command such as turn right, turn left, forward and backward. The ultrasonic sensors worked well that the robot can be stopped at a distance of less than 15 cm. In the fire test, the robot can perform the task properly to extinguish the fire.

  4. Experimental investigation of foam spread and extinguishment of the large-scale methanol pool fire.

    Science.gov (United States)

    Zhang, Qinglin; Wang, Lu; Bi, Yixing; Xu, Dajun; Zhi, Huiqiang; Qiu, Peifang

    2015-04-28

    A steel channel with the size of 30m×2 m×1.2m has been made to simulate the full surface fire of a 50,000m(3) methanol tank. Several large-scale methanol fire extinguishment experiments have been conducted under different foam application rates and foam concentrations in order to investigate the flow length, flow velocity and fire extinguishing effectiveness of the alcohol-resistant foam. The result showed that the alcohol-resistant aqueous film forming foam (AFFF/AR) and alcohol-resistant fluoro-protein foam (FP/AR) could flow beyond 30m on the burning methanol surface and extinguish the fire successfully even with the foam application rate of 4Lmin(-1)m(-2). Under the same condition, the fire extinguishing performance of AFFF/AR was better than FP/AR, and the flow velocity of AFFF/AR on the burning methanol surface was 0.203ms(-1), while the value of FP/AR was 0.082ms(-1).

  5. On Automatic Fire Extinguishing Sprinkler System%浅谈自动喷水灭火系统

    Institute of Scientific and Technical Information of China (English)

    马龙; 吕兆毅; 张小洁

    2013-01-01

    Having the function of fire prevention, fire control and fire extinguishing, the automatic fire extinguishing sprinkler system is internationally recognized as the most effective automatic fire extinguishing facility and is an important component of modern building fire prevention technology. This article briefly analyzes the automatic fire extinguishing sprinkler system and discusses the common problems in design.%自动喷水灭火系统同时具备了防火、控火、灭火的功能,是国际上公认的最为有效的自动灭火设施,是现代建筑防火技术的重要组成部分。文章简单对自动喷水灭火系统进行分析,对设计中常见问题进行讨论。

  6. 三相泡沫灭火剂热稳定性及灭火性能实验研究%The Experimental Study on Thermal Stability and Oil Fire Extinguishing Performance of Three-phase Foam Extinguishing Agent

    Institute of Scientific and Technical Information of China (English)

    吕科宗; 蒋新生; 翟琰; 魏树旺

    2016-01-01

    Thermal stability and comprehensive fire⁃fighting experimental platform of foam are designed to test thermal stabil⁃ity and the fire extinguishing performance of the mixed powder three⁃phase foam extinguishing agent, and the foam generator proto⁃type is designed to integrate three⁃phase foam stirring, mixing and foaming. With the platform, the experiment is carried out in the setting of aviation kerosene and 0# diesel. The results show that three⁃phase foam is much more stable than two⁃phase foam and the fire extinguishing efficiency of fire extinguishing agent designed in this paper has a desired comprehensive performance;the foam stabilization time under high temperature can be extended more than 3~5 times, and the fire⁃extinguishing efficiency is improved by 20%.%为研究含复配粉体三相泡沫灭火剂的热稳定性及其灭火性能,搭建了泡沫热稳定性和综合灭火实验台架,制作了泡沫发生器实验样机,实现了三相泡沫搅拌、混合、发泡一体化。利用实验台架,以航空煤油与0号柴油为对象,进行了实验研究。结果表明,三相泡沫灭火剂在高温环境下的热稳定性较两相泡沫灭火剂有较大提升,对油料的有效覆盖时间约为两相泡沫灭火剂的3~5倍,灭火性能较两相泡沫灭火剂提升20%左右。

  7. 46 CFR 34.05-5 - Fire-extinguishing systems-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... of fire prevention or inerting of cargo tanks. For vessels under 100 feet in length, the semiportable... ventilating system is installed for electric propulsion motors or generators, a carbon dioxide extinguishing...-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS FIREFIGHTING...

  8. Handheld Delivery System for Modified Boron-Type Fire Extinguishment Agent

    Science.gov (United States)

    1993-11-01

    TMB reduces this reaction; however, during storage the agent must still be isolated from any moisture source. The white precipitate is oily and gummy to...final design was goverened by the characteristics of the agent itself. Since Boralon will form a white, gummy percipitate when exposed to atmospheric...MIL-F-2261A Fire Extinguishing Agent, Liquid, Boron-Type, for Metal Fires MIL-B-26195 Box, Wood, Cleated, Skidded, Load Bearing Base 37 MIL-F-XXXX

  9. Development of a Standard Test Scenario to Evaluate the Effectiveness of Portable Fire Extinguishers on Lithium-ion Battery Fires

    Science.gov (United States)

    Juarez, Alfredo; Harper, Susan A.; Hirsch, David B.; Carriere, Thierry

    2013-01-01

    Many sources of fuel are present aboard current spacecraft, with one especially hazardous source of stored energy: lithium ion batteries. Lithium ion batteries are a very hazardous form of fuel due to their self-sustaining combustion once ignited, for example, by an external heat source. Batteries can become extremely energetic fire sources due to their high density electrochemical energy content that may, under duress, be violently converted to thermal energy and fire in the form of a thermal runaway. Currently, lithium ion batteries are the preferred types of batteries aboard international spacecraft and therefore are routinely installed, collectively forming a potentially devastating fire threat to a spacecraft and its crew. Currently NASA is developing a fine water mist portable fire extinguisher for future use on international spacecraft. As its development ensues, a need for the standard evaluation of various types of fire extinguishers against this potential threat is required to provide an unbiased means of comparing between fire extinguisher technologies and ranking them based on performance.

  10. Advanced Portable Fine Water Mist Fire Extinguisher for Spacecraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fine water mist (FWM) is a promising replacement technology for fire suppression on the next generation of manned spacecraft. It offers advantages in performance,...

  11. Effervescent Fine Water Mist Fire Extinguisher for Microgravity Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fire suppression systems provide an essential safety function onboard spacecraft. The transition away from halon-based systems has presented an opportunity for...

  12. Fine Water Mist Fire Extinguisher for Spacecraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This three phase SBIR project from ADA Technologies Inc. (ADA) builds upon the experience of ADA in development of fine water mist (FWM) fire suppression technology....

  13. Fine water spray for fire extinguishing. Phase 2: Turbine hood

    Science.gov (United States)

    Aune, P.; Wighus, R.; Drangsholt, G.; Stensaas, J. P.

    1994-12-01

    SINTEF has carried out tests of a Fine Water Spray fire suppression system intended to be used as a replacement for Halon systems in turbine hoods on offshore platforms operated by British Petroleum Norway. The tests were carried out in a 70 cu m full scale model representing a turbine hood of the Ula platform in the North Sea. A mock-up of a gas turbine was installed in the model. The scope of work in Phase 2 was to verify the efficiency of fire suppression in realistic fire scenarios using a Fine Water Spray system, and to find an optimum procedure for water application in a fire situation. Two reports have been made from the experiments in Phase 2, one Main Report, STF25 A94036, and the present Technical Report, STF25 A94037. The discussion and conclusions are given in the Main Report while this Technical Report gives a more thorough presentation of the experimental setup and methods used for calibration and calculation of measured values. In addition, a complete set of curves for each experiment is included.

  14. Environmental Health Risk Assessment and Countermeasures on a Fire Extinguisher

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.K.; Jeong, D.W. [Korea Environment Institute, Seoul (Korea)

    2001-12-01

    Brominated flame retardants encompass a large number of different organic compounds sharing the common feature of containing bromine, which has an inhibitory effect on the development of fire. The substances are added to plastic materials, insulation foam, and other materials so as to enable the products to comply with fire safety requirements and wishes. The most problematic groups of compounds are polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs). The objective of this project is to develop a management strategy for all problematic brominated flame retardants. A number of studies have shown that several of the brominated flame retardants occur in increasing concentrations in nature and in human beings. This is of concern because certain of the brominated flame retardants are suspected of having undesirable effects on the environment and health. The substances are generally very stable, especially so in the case of PBBs and PBDEs. These are strong reasons for hastening the phase-out of PBBs and PBDEs as group. Moreover, PBBs and PBDEs have attracted international attention. Within the OECD, business organisations have made voluntary agreements concerning PBBs and PBDEs. Rules of the EU forbid the use of PBBs in textiles coming into contact with the skin. The environmental and health risks of PBDEs are currently being evaluated as a part of an EU programme for existing substances. In Germany, PBBs and PBDEs are restricted through the Dioxin Ordinance and voluntary agreements with industry. Brominated flame retardants encompass a large number of different organic compounds sharing the common feature of containing bromine, which has an inhibitory effect on the development of fire. The substances are added to plastic materials, insulation foam, and other materials so as to enable the products to comply with fire safety requirements and wishes. The most problematic groups of compounds are polybrominated biphenyls(PBBs) and polybrominated diphenyl

  15. Environmental Health Risk Assessment and Countermeasures on a Fire Extinguisher

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.K.; Jeong, D.W. [Korea Environment Institute, Seoul (Korea)

    2001-12-01

    Brominated flame retardants encompass a large number of different organic compounds sharing the common feature of containing bromine, which has an inhibitory effect on the development of fire. The substances are added to plastic materials, insulation foam, and other materials so as to enable the products to comply with fire safety requirements and wishes. The most problematic groups of compounds are polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs). The objective of this project is to develop a management strategy for all problematic brominated flame retardants. A number of studies have shown that several of the brominated flame retardants occur in increasing concentrations in nature and in human beings. This is of concern because certain of the brominated flame retardants are suspected of having undesirable effects on the environment and health. The substances are generally very stable, especially so in the case of PBBs and PBDEs. These are strong reasons for hastening the phase-out of PBBs and PBDEs as group. Moreover, PBBs and PBDEs have attracted international attention. Within the OECD, business organisations have made voluntary agreements concerning PBBs and PBDEs. Rules of the EU forbid the use of PBBs in textiles coming into contact with the skin. The environmental and health risks of PBDEs are currently being evaluated as a part of an EU programme for existing substances. In Germany, PBBs and PBDEs are restricted through the Dioxin Ordinance and voluntary agreements with industry. Brominated flame retardants encompass a large number of different organic compounds sharing the common feature of containing bromine, which has an inhibitory effect on the development of fire. The substances are added to plastic materials, insulation foam, and other materials so as to enable the products to comply with fire safety requirements and wishes. The most problematic groups of compounds are polybrominated biphenyls(PBBs) and polybrominated diphenyl

  16. Review of Portable, Manually Operated, and Non-Total Flooding Fire Extinguishing Technologies for Use on Naval Vessels

    Science.gov (United States)

    2011-12-01

    requires that the process be self -sustainable. An uninhibited chemical chain reason is necessary for this to happen. Portable fire extinguishers need...application of the inert gas be monitored or fire fighting personnel exposed to these gases (at the area of localized use) are equipped with self - contained...Halons for Aircraft Fire Suppression Systems—2011 Update” 2011-03-07. http://www.fire.tc.faa.gov/pdf/DraftHalonOptionsReport2011-03-15.pdf [58] Estee

  17. Novel approach for extinguishing large-scale coal fires using gas-liquid foams in open pit mines.

    Science.gov (United States)

    Lu, Xinxiao; Wang, Deming; Qin, Botao; Tian, Fuchao; Shi, Guangyi; Dong, Shuaijun

    2015-12-01

    Coal fires are a serious threat to the workers' security and safe production in open pit mines. The coal fire source is hidden and innumerable, and the large-area cavity is prevalent in the coal seam after the coal burned, causing the conventional extinguishment technology difficult to work. Foams are considered as an efficient means of fire extinguishment in these large-scale workplaces. A noble foam preparation method is introduced, and an original design of cavitation jet device is proposed to add foaming agent stably. The jet cavitation occurs when the water flow rate and pressure ratio reach specified values. Through self-building foaming system, the high performance foams are produced and then infused into the blast drilling holes at a large flow. Without complicated operation, this system is found to be very suitable for extinguishing large-scale coal fires. Field application shows that foam generation adopting the proposed key technology makes a good fire extinguishment effect. The temperature reduction using foams is 6-7 times higher than water, and CO concentration is reduced from 9.43 to 0.092‰ in the drilling hole. The coal fires are controlled successfully in open pit mines, ensuring the normal production as well as the security of personnel and equipment.

  18. Possibility of increasing the fire-suppression efficiency of the foam in automatic extinguishing installations

    Science.gov (United States)

    Kachanov, I. V.; Veremenyuk, V. V.; Karpenchuk, I. V.; Pavlyukov, S. Yu.

    2013-05-01

    The mechanics of movement of a liquid in the diffuser of the injector of an automatic extinguishing installation with preaeration of the fire-fighting substance was theoretically investigated. An integral solution of the equation for movement of the preaerated fire-fighting gas-liquid mixture in the indicated diffuser has been obtained. A mathematical model of two-phase liquid flow in this diffuser, which allows one to calculate the distribution of the average pressure in the diffuser along its length and to determine the loss in this pressure, has been developed. This model can be used for designing the output region of a hydraulic system with a hydrodynamic drag providing the operation of its injector in a definite regime.

  19. Comparison of Carbon Dioxide and Helium as Fire Extinguishing Agents for Spacecraft

    Science.gov (United States)

    Gokoglu, Suleyman; Son, Youngjin; Ronney, Paul D.

    2004-01-01

    The effects of radiation heat transfer in microgravity compared to convection heat transfer in earth gravity for opposed-flow (downward) over thermally-thick fuel using low density foam fuel were investigated. Microgravity experiments on flame spread over thermally-thick fuels were conducted using foam fuels to obtain low density and thermal conductivity, and thus large flame spread rate compared to dense fuels such as PMMA. And thereby valid microgravity results were obtained even in 2.2 second drop-tower experiments not to mention for the longer duration tests in Zero Gravity Facility. Contrast to the conventional understanding, it was found that steady flame spread can occur over thick fuels in quiescent microgravity environments, especially when radiatively-active diluent gases such as CO2 were employed. This is proposed to result from radiative heat transfer from the flame to the fuel surface, which could lead to steady spread even when the amount of the heat transfer via conduction from the flame to the fuel bed is negligible. Radiative effects are more significant at microgravity conditions because the flame is thicker and thus the volume of radiating combustion products is larger as well. These results suggested that helium may be a better inert or extinguishment agent on both a mass and a mole bases at microgravity even though CO2 is much better on a mole bases at earth gravity, and these are relevant to studies of fire safety in manned spacecraft, particularly the International Space Station that uses CO2 fire extinguishers. CO2 may not be as effective as an extinguishing agent at microgravity as it is at earth gravity in some conditions because of the differences in spread mechanisms between the two cases. In particular, the difference between conduction-dominated heat transport to the fuel bed at earth gravity and radiation-dominated heat transport at microgravity indicates that radiatively-inert diluent such as helium could be preferable in

  20. 75 FR 13646 - Public Meeting With Interested Persons To Discuss the Proposed AC 20-42D, Hand Fire Extinguishers...

    Science.gov (United States)

    2010-03-22

    ... Federal Aviation Administration Public Meeting With Interested Persons To Discuss the Proposed AC 20-42D... received regarding proposed advisory circular (AC) 20-42D, Hand Fire Extinguishers for use in Aircraft... (IASFPWG) to draft a revision to the current AC 20-42C, issued on March 1984, by incorporating...

  1. Fire Extinguishing Performance of Firebane on JP-8 Jet Fuel Fires

    Science.gov (United States)

    2012-04-17

    Compressed Air Foam CAFFS Combined Agent Fire Fighting System cm3 cubic centimeter ft2 square feet g grams gal/min gallons per minute GSL Global...agent used, and effectiveness on the fires . Compressed air foam systems were used for the evaluations, the recommended agent delivery method for...the engine protocol pool fire ....................................... 14 Figure 6. Firebane 1115 foam blanket during engine nacelle test

  2. Method for Increasing the Efficiency of Automatic Fire Extinguish System at Objects Of Power

    Directory of Open Access Journals (Sweden)

    Dmitrienko Margarita

    2015-01-01

    Full Text Available Operation of energy facilities requires compliance with all safety standards, and especially fire safety. Emergency situations that arise when operated the power equipment damage not only the objects of the technosphere but also the environment. In recent years, can be noted a trend of quite intensive development of technological bases of technology water mist fire extinguishing. Using the methods of optical panoramic imaging PIV, IPI and the method of high-speed video recording were performed the experimental studies of the characteristics of evaporation of large single water droplets as they pass through the flames of oil and oil products with varying parameters of the processes (the initial size of 2–6 mm, the rate of 2–4 m/s and the temperature of water drops 290–300 K, the temperature of the combustion products 185–2073 K. Was established decisive influence droplet size, velocities at which droplets enter the gaseous medium, the initial water temperature on heating rate and evaporation of droplets in a stream of high-temperature combustion products.

  3. Potential production of palm oil-based foaming agent as fire extinguisher of peatlands in Indonesia: Literature review

    Science.gov (United States)

    Subekti, P.; Hambali, E.; Suryani, A.; Suryadarma, P.

    2017-05-01

    This study aims to analyze the potential aplication of of palm oil-based foaming agent as peat fires fighter in Indonesia. From literature review, it has been known that the foaming agent able to form foam to extinguish fire, wrap and refrigerate the burning peat. It is necessary to develop the production and application of foaming agent in Indonesia because peat fires occur almost every year that caused smoke haze. Potential raw material for the production of environmental friendly foaming agent as foam extinguishing for peat fires in Indonesia aong other is palm oil due to abundant availability, sustainable, and foam product easily degraded in the environment of the burnt areas. Production of foaming agent as fire-fighting in Indonesia is one alternative to reduce the time to control the fire and smog disaster impact. Application of palm oil as a raw material for fire-fighting is contribute to increase the value added and the development of palm oil downstream industry.

  4. A Neural Network based Path Planning Algorithm for Extinguishing Forest Fires

    Directory of Open Access Journals (Sweden)

    M.P.Sivaram Kumar

    2012-03-01

    Full Text Available In this work an algorithm for automatic detection and suppression of Forest fires is proposed. The algorithm is implemented using parallel distributed model of neural network with three activation functions to determine the next consecutive moves to the cells for the actor. The algorithm uses reinforcement learning with weights determined dynamically in each iteration. The Entire forest is decomposed into grid of square cells with initial position of the Actor is assumed to be the cell 1 and the goal cell is the cell where the fire has occurred. The neural network model uses starting cell, goal cell and number of cells in each row or column and three activation functions to determine the next consecutive cells in which the robot has to travel. It uses only three movements LEFT, DIAGONAL and UP to reach the target cell. After calculating next cell, the check will be made for presence of obstacles in that cell. If there is any obstacle in that cell, then one cell from other two cells obtained using other two movements, which is free from obstacle will be chosen for next move. Then the cell number is stored in memory. This process is repeated till the next cell computed is same as the goal cell. The Actor will begin to move from start cell and reach the goal cell using the cell numbers available in the memory to extinguish Forest fire. This algorithm is designed keeping in mind only static obstacles and hence it works well for Forest environment with static obstacles. Computer simulation results show that path has been found successfully without collision with obstacles.

  5. A compact aerosol fire extinguishing device%一种紧凑型气溶胶灭火装置

    Institute of Scientific and Technical Information of China (English)

    蒋效忠; 何新能; 罗文培; 关宏

    2012-01-01

    通过对气溶胶灭火装置及气溶胶灭火机理的研究,充分了解现有气溶胶灭火装置的优缺点,在经过系统试验的基础上,介绍一种集落地、悬挂、壁挂、嵌入4种安装方式的紧凑型气溶胶灭火装置,讨论了该装置的优越性,并给出了应用建议.%The advantages and disadvantages of existing aerosol fire extinguishing device were concluded through analyzing its component and mechanism. Based on system test, a compact aerosol fire extinguishing device was proposed, which could be installed by floor mounted, hanged, wall mounted and embedded, the advantages were described and application suggestions were proposed.

  6. Class B Fire-Extinguishing Performance Evaluation of a Compressed Air Foam System at Different Air-to-Aqueous Foam Solution Mixing Ratios

    Directory of Open Access Journals (Sweden)

    Dong-Ho Rie

    2016-06-01

    Full Text Available The purpose of this research is to evaluate the fire-extinguishing performance of a compressed air foam system at different mixing ratios of pressurized air. In this system, compressed air is injected into an aqueous solution of foam and then discharged. The experimental device uses an exclusive fire-extinguishing technology with compressed air foam that is produced based on the Canada National Laboratory and UL (Underwriters Laboratories 162 standards, with a 20-unit oil fire model (Class B applied as the fire extinguisher. Compressed air is injected through the air mixture, and results with different air-to-aqueous solution foam ratios of 1:4, 1:7, and 1:10 are studied. In addition, comparison experiments between synthetic surfactant foam and a foam type which forms an aqueous film are carried out at an air-to-aqueous solution foam ratio of 1:4. From the experimental results, at identical discharging flows, it was found that the fire-extinguishing effect of the aqueous film-forming foam is greatest at an air-to-aqueous solution foam ratio of 1:7 and weakest at 1:10. Moreover, the fire-extinguishing effect of the aqueous film-forming foam in the comparison experiments between the aqueous film-forming foam and the synthetic surfactant foam is greatest.

  7. Assessment of Application Example for a Sodium Fire Extinguishing Facility using Safety Control of Dangerous Substances Act

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Minhwan; Jeong, Ji-Young; Kim, Jongman [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    Sodium is under regulation of four kinds of laws including the Safety Control of Dangerous Substances Act and it is under categorized as Class 3(pyrophoric material, water-prohibiting substance). To obtain a license for a sodium experiment facility, the codes and regulations must be satisfied in the Safety Control of Dangerous Substance Act. However, there are some parts that need to be discussed in related regulations in the Safety Control of Dangerous Substance Act because there are differences with the actual features of sodium. To apply for an actual sodium facility, it is necessary to give a supplementary explanation regarding the regulations. The objective of this study is to assess the application example of a sodium experiment facility using the above mentioned laws and to propose the necessity of an amendment for conventional laws in regard to fire extinguishing systems and agents. In this work, an application example of a sodium experiment facility using the Safety Control of Dangerous Substances Act, and the necessity of amending the existing laws in regard to fire extinguishing systems including the agent used, was assessed. The safest standard was applied for cases in which the consideration of a sodium fire is not mentioned in conventional regulations. For the construction of the PGSFR (Prototype Gen-IV Sodium-cooled Fast Reactor), the described regulations in this work should be reviewed and improved carefully by the fire safety regulatory body.

  8. On the Security of the Gas Fire Extinguishing System%气体灭火系统的安全性探析

    Institute of Scientific and Technical Information of China (English)

    张继明; 邢占芳

    2012-01-01

    Gas fire extinguishing system is being widely used due to its good fire extinguishing performance and lower pollution. However, the security of gas fire extinguishing system is worth noting. This paper offers seven ways to address some problems with the security of gas fire extinguishing system in terms of the component strength, the chronic leak, the false alarm from alarm systems, designing and installing defects, the pressure strength of maintenance structure resistance, the improper, maintenance and the fire extinguishing agent toxicity.%气体灭火系统由于本身具有的良好灭火性能和灭火后污染小等特点,其应用日趋广泛,但气体灭火系统安全性问题也日益突出,对气体灭火系统的安全性从组件强度、慢性泄漏、报警系统误动作、设计安装缺陷、维护结构耐压强度、维护保养不当、灭火剂毒性等七个方面进行了分析,并提出了解决办法。

  9. 某项目气体灭火系统的选择%Selection of Gas Fire Extinguishing System in A Project

    Institute of Scientific and Technical Information of China (English)

    姜卓; 温润刚

    2015-01-01

    气体灭火的系统形式分为组合分配式和单元独立式,所选用的灭火剂有七氟丙烷、二氧化碳、IG541等多种形式.近年来随着房地产业的飞速发展,气体系统得到了广泛应用.如何根据具体项目特点,选择合适的系统形式及灭火剂成为设计者需要考虑的首要问题.该文针对某大型数据中心项目气体灭火系统的选择设计作了专项研究.%The gas fire extinguishing system contains combined distribution type and independent unit type, and the fire extinguishing agent chosen are heptafluoropropane, carbon dioxide, IG541 and likewise. With the soaring development of real estate industry apllied in recent years, the gas fire extin-guishing system has been widely used. The selection of an appropriate system mode and fire extinguishing agent, in accordance with features of specific projects, is a priority for the designer. This paper makes a special study on the selection and design of gas fire extinguishing system in a large data center project.

  10. Application of Taguchi Method In Health And Safety (Fire Extinguishing Experiment

    Directory of Open Access Journals (Sweden)

    Alharthi A. A

    2014-05-01

    Full Text Available The traditional Taguchi method is widely used for optimizing the process parameters of a single response problem. In this paper, Taguchi method is applied to study the effects of five control variables – training, experience, response to alarm, age, and qualification on extinguishing time and percent damage. An L16 orthogonal array (OA was used to accommodate the experiment. ANOVA and F-tests and regression are used to analyze the results. The study indicated that training and experience have the largest effect on the on extinguishing time and percent damage

  11. An Evaluation of Aerosol Extinguishing Systems for Machinery Space Applications

    Science.gov (United States)

    2006-02-01

    MSC/Cir. 1007) “Guidelines for the Approval of Fixed Aerosol Fire-Extinguishing Systems Equivalent to Fixed Gas Fire -Extinguishing Systems...Committee/Circular (MSC/Circ.) 1007 “Guidelines for the Approval of Fixed Aerosol Fire-Extinguishing Systems Equivalent to Fixed Gas Fire -Extinguishing...combustibles in machinery spaces. This test is also required in the approval of both halocarbon and inert gas fire extinguishing systems. These issues

  12. Fire and fire extinguishment in silos. An experimental study[Storage of wood fuel pellets]; Brand och brandslaeckning i siloanlaeggningar. En experimentell studie

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Henry; Blomqvist, Per; Zhenghua Yan

    2007-01-15

    A series of four tests have been conducted with wood pellets stored in a reduced size silo. The tests were conducted in order to increase the knowledge on fire development, detection and extinction technique in silo fires. The project originated from a pre-study on the extinction of silo fires made for the Swedish Rescue Service Agency (SRV). The test silo was built of concrete rings, had a diameter of 1 m, and a height of almost 6 m, which gave a volume of 4.4 m{sup 3}. The silo was filled with wood pellets up to a height of 5 m. A local auto ignition was imitated by a coiled heating wire placed in the pellet bulk centrally in the silo and a self sustaining pyrolysis zone was established within one hour. The silo was instrumented with almost 100 thermocouples as a mean to follow the development of the pyrolysis zone and later the efficiency of the extinguishment. Gas analyses were further made, both in the top of the silo, and at four different levels in the pellet bulk. After 30 hours the extinguishment was initiated using nitrogen (N{sub 2}) and carbon dioxide (CO{sub 2}), respectively. The gas was injected into the bottom of the silo. Two tests were also conducted where gas injection was combined foam application in the top of the silo. The tests showed that the pyrolysis zone preferably spreads downwards in the silo, while moisture and pyrolysis gases form a wave that slowly spreads upwards. It was difficult to detect the fire before the main 'gas wave' reached the pellet surface in the silo top, and detection time was about 20 hours in these tests. The spread of the pyrolysis zone, downward, was even slower. The slow development is probably an explanation of why real silo fires often are rather extensive once discovered. Inerting the silo with either nitrogen or carbon dioxide worked out well in the tests. The gas must be in gas phase and slowly introduced into the silo, as close to the bottom as possible. An efficient extinction implies an air

  13. Application research of gas fire extinguishing system in building fire-fighting design%气体灭火在建筑消防设计中的应用研究

    Institute of Scientific and Technical Information of China (English)

    王子焱

    2016-01-01

    The thesis introduces features of three kinds of common gas fire extinguishing system including IG541 ,heptafluoropropane and aerosol extinguishing gas,analyzes their safety,and illustrates the high efficiency and timeliness of gas fire extinguishing system through examples.%介绍了IG541、七氟丙烷、热气溶胶气体三种常见气体灭火系统的特点,从大气环境、人体、保护对象等角度,分析了三种气体灭火系统的安全性,并通过实例说明了使用气体灭火系统具有高效性、及时性。

  14. 谈自动喷水灭火系统的设计%On design for automatic sprinkling fire extinguishing system

    Institute of Scientific and Technical Information of China (English)

    崔冰

    2015-01-01

    介绍了自动喷水灭火系统的优点,结合该系统的组成要素,从喷头布置、管网布置、报警阀组设置、末端试水装置设置等方面,总结了该系统的设计要点,有利于促进自动喷水灭火系统的优化设计。%The paper introduces the advantages of the automatic sprinkling fire extinguishing system,combining with the elements of automatic sprinkling fire extinguishing system,and sums up its design points from the sprinkler allocation,pipeline network allocation,alert valve units lay-out,and end water-test equipment,so as to have the optimal design for the system.

  15. 食用油火灾灭火剂的研究现状与发展趋势%Current state and development trend of cooking oil fire extinguishing agent

    Institute of Scientific and Technical Information of China (English)

    王荣基; 宋波; 傅学成; 包志明; 陈涛; 张宪忠

    2012-01-01

    在分析食用油火灾特性的基础上,详细分析目前常见的灭火剂品种在扑救食用油火时的特点和适用性,提出具备皂化反应性质的食用油灭火剂是较为适宜的食用油灭火剂.介绍了厨房灭火技术相关技术标准的现状,进一步提出未来的食用油灭火剂应具备灭火效率高、灭火时基本无飞溅、灭火后不易复燃、对人和环境无显著毒性危害、不会污染厨房内的其他食品及器具、火灾后现场易于清理等特点.%The characteristics of cooking oil fire were analyzed, and the fire extinguishing characteristics and applicability of different fire extinguishing agents were compared. It was proposed that the extinguishing agents with saponification reaction are the proper agents to suppress cooking oil fire. The status of relevant standards on kitchen fire extinguishing technologies was introduced, and it was further pointed out that the cooking oil fire extinguishing agent in the future should have the features as follows: high fire extinguishment efficiency, no oil splash when extinguishing the fire, difficult to recrudescence after fire, no significant toxicity on human and environment, no pollution on other food and apparatus, easy to clean after the fire is suppressed.

  16. Experimental Research on Fire Resistance of Reactive Powder Concrete

    OpenAIRE

    Gai-Fei Peng; Yi-Rong Kang; Yan-Zhu Huang; Xiao-Ping Liu; Qiang Chen

    2012-01-01

    An experimental investigation was conducted on fire resistance of reactive powder concrete (RPC), mainly on explosive spalling occurrence and residual mechanical properties exposed to high temperature. The residual mechanical properties measured include compressive strength, tensile splitting strength, and fracture energy. RPC was prepared using cement, sand, silica fume, steel fiber, and polypropylene fiber. After subjected to high temperatures from 200 to 600°C, the residual mechanical prop...

  17. 泡沫类灭火剂在化工企业火灾的应用%Application of Foam Extinguishers in the Fire of Chemical Industry

    Institute of Scientific and Technical Information of China (English)

    邬勇

    2011-01-01

    针对化工企业复杂多变的火灾情况,分析了不同种类的泡沫灭火剂灭火原理、性质以及适应扑救的化工火灾场所,为化工企业火灾扑救起到了一定的指导作用。%Focused on fire suppression principle, nature and applying areas of different kinds of foam extinguishers. It would be give some guidance to fight the chemical industry fire.

  18. Research on combustion character during extinguishing of paraffin wax fire%石蜡火灾扑救过程中的燃烧特性

    Institute of Scientific and Technical Information of China (English)

    高凌; 李玉; 高扬; 康青春

    2012-01-01

    An experimental model for simulating the paraffin wax fire was designed and set up, which consists of burning device, data acquisition and processing system and extinguishing system. As a benefit, the tests of the combustion characteristics of paraffin wax were performed in the period of extinguishing. Both the thermal radiation and the temperature variation were acquired and analyzed, as well as the descriptions of their trend in the flame combustion and extinguishing. The experiments showed that the paraffin wax was not easy to be ignited, and the fluidity was the main character and risk of paraffin wax.%设计制作了由燃烧装置、数据采集处理系统和灭火系统3部分组成的石蜡火灾试验模型,对石蜡火灾扑救过程中的燃烧特性进行试验研究,采集分析了石蜡火灾的热辐射和温度变化数据,描述了火焰燃烧和火焰扑灭过程中的变化趋势.通过实验发现,石蜡并不容易被点燃,流动性是石蜡火灾最重要的特点和危险因素.

  19. Application of Compressed air foam Fire-Extinguishing Device to Fire Engine%压缩空气泡沫灭火装置在消防车上的应用

    Institute of Scientific and Technical Information of China (English)

    谈卫东; 许正潮

    2012-01-01

    This paper briefly introduces the performance, characteristics and operational principle of applying the patent for invention (ZL200610038368.2) compressed air foam fire-extinguishing device to fire engine. By installing this device on fire engine, it can raise up the fighting capacity of the fire protection army in the city to A type fire effectively. On the premise of satisfying the extinguishment characteristic, this device replaces the import products and the cost of purchasing the A type foam fire engine may be reduced largely.%介绍了发明专利(ZL200610038368.2)压缩空气泡沫灭火装置,在消防车上应用的性能特点和工作原理;通过在消防车上安装该装置,可以有效的提高消防部队灭城市A类火的战斗力;该装置替代进口产品,在满足灭火性能的前提下,可以大大的降低消防部队采购A类泡沫消防车的成本.

  20. 气体灭火系统的火灾自动报警和控制探讨%The Discussion about Gas fire extinguishing system of Fire auto-alarm and control

    Institute of Scientific and Technical Information of China (English)

    黄彩萍

    2011-01-01

    This article elaborate the design for fire auto-alarm and control of Gas fire extinguishing system,introduce some security measures for protected area,with the related technical codes and the examples of project.%本文结合相关规范及工程实例,详细阐述了气体灭火系统的火灾自动报警和控制系统设计以及防护区内的安全措施。

  1. Durability of fired clay bricks containing granite powder

    Directory of Open Access Journals (Sweden)

    Xavier, G. C.

    2012-06-01

    Full Text Available Over the past few decades, hundreds of papers have been published on the benefits of including rock powder as a raw material in fired clay brick manufacture. Very little has been written, however, about the durability and long-term behaviour of the final product. As a rule, the ceramic bricks used in construction in developing countries are fired at low temperatures, which detracts from their mechanical performance. This is particularly visible in harsh environmental conditions, where weathering causes severe deterioration. The present paper describes the impact of weathering on clay bricks containing from 0 to 10% granite powder, an industrial by-product. The specimens were fired at 500, 700 or 900 ºC and subsequently exposed to natural environmental conditions or accelerated laboratory weathering. Their physical and mechanical properties were evaluated to determine the effect of the composition of raw materials on fired clay product durability.

    En las últimas décadas se han publicado cientos de artículos sobre las ventajas de incluir polvo de roca como materia prima en la fabricación de los ladrillos cerámicos. Sin embargo, la durabilidad y el comportamiento a largo plazo del producto final han sido objeto de pocas investigaciones. Por lo general, los ladrillos cerámicos empleados en la construcción en los países en vías de desarrollo se cuecen a temperaturas bajas, lo que impide el desarrollo de sus propiedades mecánicas. Esto queda especialmente patente cuando las condiciones ambientales son severas, en cuyo caso la meteorización puede provocar un deterioro importante. En este artículo se describe el efecto de la meteorización en ladrillos cerámicos que incorporaban entre un 0 y un 10% de polvo de granito, que es un derivado industrial. Las probetas se cocieron a 500, 700 o 900 °C y luego se sometieron a condiciones ambientales naturales o a un proceso de laboratorio de meteorización acelerada. Se evaluaron sus

  2. 46 CFR 115.810 - Fire protection.

    Science.gov (United States)

    2010-10-01

    ... extinguisher, semiportable fire extinguisher, and fixed gas fire extinguishing system to check for excessive... testing of alarms and ventilation shutdowns, for each fixed gas fire extinguishing system and detecting... and fixed gas fire extinguishing systems, the inspections and tests required by Table 115.810(b),...

  3. 大型地上立式油罐区火灾爆炸危险与灭火救援%Fire and explosion hazard and fire extinguishing of large vertical aboveground tank

    Institute of Scientific and Technical Information of China (English)

    傅智敏; 黄金印

    2012-01-01

    统计地上立式油罐的常见火灾爆炸类型及其发生频率,总结国内外油罐火灾爆炸事故典型案例,分析火灾爆炸与油罐结构和储存油品性质的关系.介绍常压立式油罐火灾爆炸的常见类型、特点及其扑救措施.探讨大型常压地上立式油罐火灾爆炸事故处置过程中泡沫供给这一关键因素,以及灭火救援中油罐冷却的原则及技术要领.阐述大型地上立式油罐区火灾扑救的注意事项.%The general fire and explosion type and their frequency of aboveground vertical tank were statistically calculated. Typical fire and explosion accidents of oil tank in China and other countries were summarized. The relationship of fire and explosion and tank structure and oil characteristics was analyzed. The general type, characteristics and extinguishing methods of vertical atmospheric storage tank were introduced. The foam supply of fire and explosion accidents of large vertical atmospheric storage tank was discussed, together with the cooling principle and technology essentials. Notes of large vertical aboveground tank farm fire extinguishing were elaborated.

  4. Experimental Research on Fire Resistance of Reactive Powder Concrete

    Directory of Open Access Journals (Sweden)

    Gai-Fei Peng

    2012-01-01

    Full Text Available An experimental investigation was conducted on fire resistance of reactive powder concrete (RPC, mainly on explosive spalling occurrence and residual mechanical properties exposed to high temperature. The residual mechanical properties measured include compressive strength, tensile splitting strength, and fracture energy. RPC was prepared using cement, sand, silica fume, steel fiber, and polypropylene fiber. After subjected to high temperatures from 200 to 600°C, the residual mechanical properties were determined. RPC spalled considerably under high temperature. After exposure to high temperatures from 200 to 400°C, mechanical properties were enhanced more or less, which can be attributed to further hydration of cementitious materials activated by elevated temperature. Compressive strength started to decrease after exposure to 400°C, but tensile splitting strength and fracture energy started to decrease after exposure to 200°C. Incorporating hybrid fiber (polypropylene fiber and steel fiber is a promising way to enhance resistance of RPC to explosive spalling, which should be a main objective for improving its fire resistance.

  5. Fire safety at home

    Science.gov (United States)

    ... over the smoke alarm as needed. Using a fire extinguisher can put out a small fire to keep it from getting out of control. Tips for use include: Keep fire extinguishers in handy locations, at least one on ...

  6. 便携式高压气体森林灭火器与应用%Application Of Portable High-pressure Gas Fire Extinguisher

    Institute of Scientific and Technical Information of China (English)

    朱静娟

    2011-01-01

    介绍了便携式高压气体森林灭火器的结构与工作原理及特点;阐述了该灭火器主要性能的测试方法和动力变化趋势;最后详细分析了该灭火器合理应用的药剂网点布置、设备组织及操作安全。%This paper introduces the structure,working principle and characteristics of portable high-pressure gas fire extinguisher,states the testing method and dynamical variety tendency of its main property.It also analyzes the reasonable medicament stipple arrangement,equipment organization and safety operation.

  7. Water-based chitosan/melamine polyphosphate multilayer nanocoating that extinguishes fire on polyester-cotton fabric.

    Science.gov (United States)

    Leistner, Marcus; Abu-Odeh, Anas A; Rohmer, Sarah C; Grunlan, Jaime C

    2015-10-05

    Polyester-cotton (PECO) blends are widely used in the textile industry because they combine the softness of cotton and the strength and durability of polyester. Unfortunately, both fiber types share the disadvantage of being flammable. The layer-by-layer coating technique was used to deposit a highly effective flame retardant (melamine polyphosphate) from water onto polyester-cotton fabric. Soluble melamine and sodium hexametaphosphate form this water-insoluble flame retardant during the coating procedure. This unique nanocoating imparts self-extinguishing properties to PECO with only 12% relative coating weight. Vertical flame testing, pyrolysis combustion flow calorimetry (PCFC), thermogravimetric analysis (TGA), and scanning electron microscopy were used to evaluate the quality of the coating as well as its flame retardant performance. A combination of both condensed and gas-phase activity appears to be the reason for this effective flame retardancy. Degradation pathways of both cotton and polyester are affected by the applied coating, as shown by PCFC and TGA. Use of environmentally benign and non-toxic chemicals, and the ease of layer-by-layer deposition, making this coating an industrially feasible alternative to render polyester-cotton fabric self-extinguishing.

  8. Control means to improve the gas fire extinguishing system fire valve%改进气体灭火系统防烟防火阀的控制方式

    Institute of Scientific and Technical Information of China (English)

    刘文飞

    2014-01-01

    介绍了深圳地铁三号线气体灭火系统,分析了该系统原防烟防火阀的控制方式,从安全可靠的角度出发,提出了合理的改造方案,并加以实施,达到预期的效果,创造了经济效益。%Introduced the Shenzhen metro line no.3 gas fire-extinguishing systems,analyzes the system of the fire valve control mode of original,from the point of view of safe and reliable,put forward the reasonable reconstruction scheme,and implement,to achieve the expected effect,create the economic benefit.

  9. Experimental study on the performance of class A foam in extinguishing class A fires%A类泡沫灭火剂灭火性能试验研究

    Institute of Scientific and Technical Information of China (English)

    陆强; 包志明; 陈涛; 张宪忠; 傅学成

    2013-01-01

    A类泡沫是一类新型火灾安全防护产品,先前研究侧重定性和半定量的灭火性能评估,通过标准木垛火试验,定量评价A类泡沫灭火剂灭A类火性能,探索不同混合比、发泡倍数等使用条件对灭火性能的影响,并与普通水的灭火性能进行比较.结果表明,在相同供给强度下,在压缩空气泡沫系统中使用A类泡沫灭火剂灭A类火,灭火速度相比普通水快20%以上.并且当混合比在0.2%~0.5%,发泡倍数在5~15倍,灭火效果较好.而按照木垛火得出的适宜使用参数,经大量灭火实战检验,其同样有效.%Class A foam is a new kind of fire safety protective production. Previous studies focused on qualitative and semi-quantitative extinguishing performance evaluation, but in this paper, experimental study was conducted to quantitatively evaluate the performance of class A foam in extinguishing class A fires by standard wood crib fire test. The effect of mixing ratio, expansion and other parameters on extinguishing performance was investigated, and was compared with the performance of water. The results here suggested that the extinguishing speed using class A foam in compressed air foam system is at least 20% faster than water in extinguishing class A fires at the same application rate. The best extinguishing effect was achieved at the mixing ratio in the range of 0. 2% ~0. 5% , and the expansion in the range of 5~15. The optimum factors obtained in wood crib fire test ware still effective in a large number of fire-fighting.

  10. S型气溶胶灭火装置检测方法的探讨%Discussion on the detection method of S-type aerosol fire extinguishing system

    Institute of Scientific and Technical Information of China (English)

    崔日迅

    2013-01-01

    The composition and work principle of S-type aerosol fire extinguishing system were introduced based on a communication transmission station. The typical detection method was introduced, which includes the host debugging, system debugging, and detection of detection facility. The detection consideration was put forward based on the debugging and detection method of S-type aerosol fire extinguishing system, the detection method and procedure under different condition were introduced with example. The electric initiator for detection, special facility that can detect quantitatively and simulated load were used as the replacement of fire extinguishing facility to detect the start output capability. The electric current method and e-lectric resistance method were used to detect the series connection of loop of fire extinguishing facility.%以某通信传输站为例介绍S型气溶胶灭火系统组成及工作原理,介绍其典型检测方法,包括主机调试、系统调试、检测装置检测.根据S型气溶胶灭火系统调试检测方法提出检测思路.分不同状况举例详细介绍检测方法、步骤.系统不具备自检功能时以检测用的电引发器、可以量化检测的专用装置或模拟负载替代灭火装置检测启动输出能力.检测灭火装置回路的串联连接状况可采用电流法或电阻法.

  11. 轴流风力灭火机的发展及其结构讨论%Development of Axial-flow Pneumatic Fire Extinguishers and Discussion about Their Structure

    Institute of Scientific and Technical Information of China (English)

    李宏伟; 秦瑞鸿; 俞国胜

    2014-01-01

    In recent years, the research and development of axial-flow pneumatic fire extinguishers has shifted from proposing design concept,constructing fan performance test benches and establishing numerical models for simulation analysis to per-formance discussion and design improvement stage of axial-flow pneumatic fire extinguishers with different structures. Seen from the structural form,experiments and inner flow analysis are conducted of total pressure and outlet wind speed of axial-flow pneumatic fire extinguishers with three structural arrangements,i.e. single stage with rotor blade,counter-rotating struc-ture and single stage with both rotor and stator blades. The result shows that the structure of single stage with both rotor and stator blades can effectively improve the total pressure of axial-flow pneumatic fire extinguishers but that the outlet speed re-mains to be improved.%近几年来,轴流风力灭火机的研发已从设计构想的提出、风机性能实验台搭建、数值分析模型的建立迈向了对不同结构下轴流风力灭火机性能讨论和设计改进阶段。在其结构形式上,目前主要对单级动叶、对旋及动静叶单级结构三种布置形式下轴流风力灭火机全压及出口风速的优劣进行实验和内流分析。结果表明,动静叶单级结构能够有效地提高轴流风力灭火机全压,但出口风速还有待提高。

  12. 基于Gompertz曲线的石油库罐区火灾灭火剂供应量预测%Prediction on the supply quantity of fire extinguishing agent for petroleum storage tank based on the the Gompertz curve

    Institute of Scientific and Technical Information of China (English)

    王旭

    2013-01-01

    石油库罐区火灾的成功扑救依赖于灭火剂量的充足供应.结合火灾发展阶段特点,发现火灾中灭火剂供应量发展规律基本符合Gompertz曲线.于是,在对火场扑救力量作战能力分析的基础上,以灭火剂使用量为标准,对作战能力进行量化分析,将量化数值和时间段编号作为基础数据,建立Gompertz趋势预测模型.利用预测模型对石油库罐区类火灾灭火剂供应量进行预测,排除了人为估算的盲目性,避免灭火剂调用“供过于求”的现象.%The success of oil tank fire fighting depends on the adequate supply of extinguishing agent.Combined with the characteristics of fire development stage,it was found that the law of development for the fire extinguishing agent supply in line with the Gompertz curve.Thus,based on the analysis of fire fighting forces capability,taking the amount of extinguishing agent as standard,the combat capability was quantitatively analyzed,and the Gompertz model was established to predict the dosage.It can exclude human estimates of bhndness,and avoid extinguishing agent oversupply.

  13. 泡沫灭火系统中泡沫比例混合装置在集输站库中的运行%Operation of foam proportioning devices for foam fire extinguishing system in gathering station library

    Institute of Scientific and Technical Information of China (English)

    陈建雄; 韩金波; 樊光耀

    2012-01-01

      The foam extinguishing system consists of fire pumps, fire water, foam extinguishing agent storage device, foam proportioning mixing device, foam generating apparatus and pipes and other components. The foam proportioner mixes foam extinguishing agent with water in a certain proportion to form a foam mixture, and then the air foam is generated by the bubble generating device and is expelled onto a fire. There are three kinds of foam fire extinguishing systems which are systems with high, medium and low multiples of foam acoording to the multiples of foam generated by the system. This paper discusses the problems created in the operation of the foam proportioning device in oilfield major stations and library.%  泡沫灭火系统主要由消防水泵、消防水源、泡沫灭火剂储存装置、泡沫比例混合装置、泡沫产生装置及管道等组成。它是通过泡沫比例混合器将泡沫灭火剂与水按比例混合成泡沫混合液,再经泡沫产生装置形成空气泡沫后施放到着火对象上实施灭火的系统。泡沫灭火系统按泡沫产生倍数的不同,分为高、中、低倍数三种系统。文中重点对泡沫比例混合装置在油田大站大库中运行时存在的问题进行探讨。

  14. Study on fire prevention and extinguishing of solid propellants in manufacture of rolling%固体推进剂在压延中燃烧的预防和灭火研究

    Institute of Scientific and Technical Information of China (English)

    李晋; 杨斌; 赵树森

    2012-01-01

    Solid propellant consists of incendiary and oxidant. Solid propellant can combust intensely without oxygen. Aiming at the main causes of propellant inflammation during the rolling manufacture, the effect of temperature and moisture content on hot-spot formation of solid propellant was investigated. Further more, the technical safe measures for solid propellant manufacture. Aiming at the extinguishing problem that the fire fighting equipment being used in the solid propellant industry can not effectively put out the solid propellant fire, the ideas and methods of the solid propellant fire extinguishing were basically brought forward by the analysis of the solid propellant fire mechanism. Experimented results indicated that the choose of spray pressure, spray bore diameter, distance from spray to fire and fire time in anticipation plays an important role in extinguishing the solid propellant fire. As a result, the ideas and methods of the high-speed water jet technology for extinguishing the solid propellant fire.%固体推进剂的组分中既有氧化剂又有燃烧剂,在没有外界氧气的情况下,也能发生燃烧爆炸事故.针对固体推进剂在压延生产中产生燃烧的主要原因,研究了水分和温度对固体推进剂热点形成的影响,提出了防火安全技术措施.针对部分火炸药企业的消防设施不能有效扑灭固体推进剂火灾和阻止燃爆事故的情况,通过对固体推进剂燃烧灭火机理的分析,采用选择不同的喷水压力、喷头孔径、喷头与火焰区的距离、预先燃烧时间等因素,对固体推进剂进行燃烧灭火效果的实验研究,提出了固体推进剂火灾的高速喷水灭火技术的思路和措施.

  15. Briefly Discuss on Tightness Test and Maintenance of Gas Fire Extinguishing System’s Start Pipeline%浅谈气体灭火系统启动管道的气密性试验和维护保养

    Institute of Scientific and Technical Information of China (English)

    刘富标

    2014-01-01

    气体灭火系统用于重要设备房内,如设备房内发生火灾系统将自动喷气进行灭火。气体灭火系统的启动管道是喷气式,用于输送启动瓶的氮气打开选择阀和灭火剂存储钢瓶瓶头阀,而启动管道满足气密性要求是保证气体灭火剂正常喷发的先决条件,因而必须在施工验收期间进行启动管道气密性试验并在日常维护中重点关注其气密性是否满足要求。仅就气体灭火系统启动管道气密性试验的必要性、具体方法及其维护保养提出一些看法,供气体灭火系统相关单位进行施工验收和维护保养时参考。%Gas extinguishing systems is used in important equipment room,when the fire broke out it will release extinguishing agent to put out the fire. When releasing extinguishing agent, the start pipeline of gas fire extinguishing system is used to transfer the nitrogen of starting receiver to open selector valve and extinguishing agent storage steel cylinder’s bottle valve. The tightness of start pipeline is the precondition for gas releasing. So it’ s important to do tightness test when it’ s under construction and acceptance, it’ s also very important to pay close attention to the tightness of start pipeline in daily maintain. This article will discuss the importance of start pipeline’ s tightness test,and how to do tightness test and maintenance method,to provide a reference to those who need.

  16. 罐壁式泡沫系统扑救密封圈火灾试验研究%Experiment research on tank-shell foam extinguishing system of rim seal fire

    Institute of Scientific and Technical Information of China (English)

    任常兴; 王婕; 张欣; 吴伟; 李晋; 涂建新; 徐大军

    2013-01-01

    According to the characteristics and shortage of tank-shell fire fighting system of open-top large floating roof oil tanks , an experiment oil groove of rim seal fire with 30 meters long was designed by the related code , and some foam extinguishing experiments of 3%aqueous film-forming foam concentrate ( AFFF) and 6%fluoroprotein foam concentrate ( FP) were conducted .In the experiment process , foam expansion ratio and 25%drainage time of 3%AFFF and 6%FP were tested on spot , and accorded with the standard of fire extinguish agent , but were both less than testing report value of lab .Moreover, foam flow speed in the foam weir plate and overspread rate on the fire oil surface were determined , and oil fire development condition was observed and recorded .The temperature and heat flow of oil groove fire were contrasted and analyzed with different foam and application rate of foam solu -tion.Furthermore, the effectiveness of tank-shell foam extinguishing system of open-top large floating roof oil tanks for rim seal fire was descried and discussed .The test results showed that 3%AFFF and 6%FP may control and ex-tinguish even the rim seal fire with the effective application density of foam concentrate , and foam type and applica-tion density have important effect on the time of total flooding oil surface .This experiment has some positive refer-ence and engineering application value for foam extinguishing rim seal fire of large floating roof oil tanks with low liquid level.%针对大型浮顶罐罐壁式泡沫灭火系统的特点及不足,依据相关规范要求设计了30m长的密封圈火灾模拟试验油槽,开展了3%型水成膜泡沫液和6%型氟蛋白泡沫液灭火试验。现场测定了泡沫的发泡倍数和析液时间,符合规范要求但略低于检测值。试验过程测定了泡沫在泡沫堰板内的流动速度和燃烧油面的蔓延速度,观察了不同的泡沫液和泡沫混合液供给强度下

  17. Use of anti-pyrogenic powder to prevent spontaneous combustion of coal

    Energy Technology Data Exchange (ETDEWEB)

    Maevskaya, V.M.; Baskakov, V.I.; Boldin, V.A.

    1986-07-01

    The paper describes the generation of endogenic fires during extraction, by the shield method, of thick seams of coal prone to spontaneous combustion, outlines the disadvantages of current system of extinguishing and preventing such fires and proposes the use of anti-pyrogenic powder for this purpose. The powder, which is composed of carbanide and diammonia phosphate and is non-toxic, inexpensive and readily available, is pumped via boreholes under pressure into the coal pillar between horizons prior to its being caved in order to prevent generation of endogenic fires in the caved area of the extraction pillar by starving the fire zone of oxygen. Successful applications of this method are described.

  18. Gas Fire Extinguishing System and Its Application on Xi'an Metro Line 2%西安地铁2号线气体灭火系统及其应用

    Institute of Scientific and Technical Information of China (English)

    高扬

    2013-01-01

    The paper briefly describes the characteristics of gas fire extinguishing system, structure and functions, the interface relation between gas fire extinguishing system and fire-fighting equipment as well as its application on Xi'an metro line 2.%  要:随着社会经济的发展和科技的进步,大批工业和民用建筑不断涌现,越来越多不能用水灭火的场所需要使用灭火后破坏性小的介质进行保护,气体灭火系统逐步得到了业内的认可。文章简要介绍西安地铁2号线气体灭火系统的特点、构成及功能,以及气体灭火系统与消防设备的接口关系及其应用。

  19. High-rise buildings PeiDianJian within gas fire-extinguishing systems design change are discussed%高层建筑内变配电间气体灭火系统设计探讨

    Institute of Scientific and Technical Information of China (English)

    林孔学

    2011-01-01

    文章对高层建筑内变配电间常用气体灭火系统设计进行了深入分析,提出了目前设计存在的问题及注意事项,并结合工程实例进行了阐述。%This paper PeiDianJian commonly used in high-rise buildings change gas fire-extinguishing systems design are analysed,put forward the current design problems and precautions,and combined with engineering example is discussed in this paper.

  20. A study on the fire response of compressed hydrogen gas vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Tamura, Yohsuke; Tomioka, Junichi; Suzuki, Jinji [Japan Automobile Research Institute (Japan)

    2010-07-01

    To investigate the events that could arise when fighting fires in vehicles with compressed hydrogen CFRP (carbon fiber reinforced plastic) composite cylinders, we conducted experiments to examine whether a hydrogen jet flame caused by the activation of the pressure relief device (PRD) can extinguished and how spraying water influences the cylinder and PRD. The experiments clarified that the hydrogen jet flame cannot be extinguished easily with water or dry powder extinguishers and that spraying water during activation of the PRD may result in closure of the PRD, but is useful for maintaining the strength of CFRP composite cylinders for vehicles. (orig.)

  1. 46 CFR 176.810 - Fire protection.

    Science.gov (United States)

    2010-10-01

    ...) Inspection of each hand portable fire extinguisher, semiportable fire extinguisher, and fixed gas fire... maintenance procedures have been conducted. (2) For semiportable and fixed gas fire extinguishing systems, the..., and valves, and the inspection and testing of alarms and ventilation shutdowns, for each fixed...

  2. Test and Evaluation of Commercially Available Halon 1211 Hand-Portable Fire Extinguishers for Use in Habitable and Cargo Compartments of USAF Aircraft

    Science.gov (United States)

    1981-05-01

    in this portion of the valve head. The flat spring inside the head was slightly corroded. The safety pin was stiff to remove. Valve operation was...assembly. Salt deposits were present here and the flat valve spring was slightly corroded. The safety pin was stiff to remove. Valve oper- ation was...light chain to prevent loss. These devices were easily removed for extinguisher operation. Although the Ansul safety pin , when in place, did prevent

  3. Suggestions on Code for Design of Gas Fire Extinguishing Systems%对《气体灭火系统设计规范》(GB 50370-2005)的建议

    Institute of Scientific and Technical Information of China (English)

    盛杰

    2012-01-01

    The imperfect parts existing in the starting mode, ventilation and smoke exhaust in protection zone, cylinder selection for the combined distribution system and other aspects in the Code for Design of Gas Fire Extinguishing Systems ( GB 50370 - 2005 ) were discussed. Suggestions on amendment and supplement of some articles of the code were proposed.%针对《气体灭火系统设计规范》(GB 50370-2005)在系统启动方式、防护区通风排烟、组合分配系统钢瓶选择等方面存在的未完善部分进行探讨,对规范部分条文提出了修改和新增的建议.

  4. 46 CFR 28.825 - Excess fire detection and protection equipment.

    Science.gov (United States)

    2010-10-01

    ... existing fixed gas fire extinguishing system that is in excess of the required fire protection equipment..., alteration, or new installation of a fixed gas fire extinguishing system must meet the...

  5. The Start Current Detection Method and Its Detection Device of an S-type aerosol Fire Extinguishing System%一种S型气溶胶灭火系统启动电流的检测方法及其检测装置

    Institute of Scientific and Technical Information of China (English)

    崔日迅

    2012-01-01

    With the application and popularization of the S-type aerosol fire extinguishing technology, in recent years, the communications room, computer room, change (with) electric room, generator room spaces of buildings, many are using the S-type aerosol fire extinguishing equipment as fire-fighting facilities. The paper tried discussion method for the detection of the S-type aerosol systems, the detecting means of the fire extinguishing system of one S-type aerosol.%随着S型气溶胶灭火技术的应用推广,近年来建筑物中的通讯桃房、电子计算机房、变(配)电间、发电机房等场所,许多都采用S型气溶胶灭火装覆作为消防设施。本文试探讨S型气溶胶系统的检测方法,提出一种S型气溶胶灭火系统的检测装嚣。

  6. To Extinguish the Fire from Outside the Cell or to Shutdown the Gas Valve Inside? Novel Trends in Anti-Inflammatory Therapies.

    Science.gov (United States)

    Marcuzzi, Annalisa; Piscianz, Elisa; Valencic, Erica; Monasta, Lorenzo; Vecchi Brumatti, Liza; Tommasini, Alberto

    2015-09-07

    Cytokines are the most important soluble mediators of inflammation. Rare pediatric diseases provided exemplar conditions to study the anti-inflammatory efficacy of new generation therapies (biologics/biopharmaceuticals) selectively targeting single cytokines. Monoclonal antibodies and recombinant proteins have revolutionized anti-inflammatory therapies in the last two decades, allowing the specific targeting of single cytokines. They are very effective in extinguishing inflammation from outside the cell, even with the risk of an excessive and prolonged immunosuppression. Small molecules can enter the cell and shutdown the valve of inflammation by directly targeting signal proteins involved in cytokine release or in response to cytokines. They are orally-administrable drugs whose dosage can be easily adjusted to obtain the desired anti-inflammatory effect. This could make these drugs more suitable for a wide range of diseases as stroke, gout, or neurological impairment, where inflammatory activation plays a pivotal role as trigger. Autoinflammatory diseases, which have previously put anti-cytokine proteins in the limelight, can again provide a valuable model to measure the real potential of small inhibitors as anti-inflammatory agents.

  7. To Extinguish the Fire from Outside the Cell or to Shutdown the Gas Valve Inside? Novel Trends in Anti-Inflammatory Therapies

    Directory of Open Access Journals (Sweden)

    Annalisa Marcuzzi

    2015-09-01

    Full Text Available Cytokines are the most important soluble mediators of inflammation. Rare pediatric diseases provided exemplar conditions to study the anti-inflammatory efficacy of new generation therapies (biologics/biopharmaceuticals selectively targeting single cytokines. Monoclonal antibodies and recombinant proteins have revolutionized anti-inflammatory therapies in the last two decades, allowing the specific targeting of single cytokines. They are very effective in extinguishing inflammation from outside the cell, even with the risk of an excessive and prolonged immunosuppression. Small molecules can enter the cell and shutdown the valve of inflammation by directly targeting signal proteins involved in cytokine release or in response to cytokines. They are orally-administrable drugs whose dosage can be easily adjusted to obtain the desired anti-inflammatory effect. This could make these drugs more suitable for a wide range of diseases as stroke, gout, or neurological impairment, where inflammatory activation plays a pivotal role as trigger. Autoinflammatory diseases, which have previously put anti-cytokine proteins in the limelight, can again provide a valuable model to measure the real potential of small inhibitors as anti-inflammatory agents.

  8. 水罐消防车操纵稳定性与平顺性的仿真优化%Simulation Optimization on the Handling Stability and Ride Comfort of Fire-extinguishing Water Tanker

    Institute of Scientific and Technical Information of China (English)

    王铁; 高昱; 申晋宪

    2012-01-01

    A dynamic model for a fire-extinguishing water tanker is built with software MSC Adams/Car, based on which simulation tests are conducted on its handling stability and ride comfort performances. An optimization is then performed on the stiffness and damping of front and rear suspensions on the base of simulation data. Finally by trading off the results of optimization, the optimum combination of suspension parameters, which can improve both handling stability and ride comfort, is selected and validated by simulation test again.%使用MSC Adams/Car软件建立了某水罐消防车的动力学模型,基于此模型对整车操纵稳定性与平顺性进行仿真试验.结合仿真数据对前后悬架的刚度和阻尼进行正交设计优化,最后根据对优化结果的权衡分析,选定能同时提高操纵稳定性与平顺性的最优悬架参数组合,并通过仿真试验进行验证.

  9. Determination of Survivable Fires

    Science.gov (United States)

    Dietrich, D. L.; Niehaus, J. E.; Ruff, G. A.; Urban, D. L.; Takahashi, F.; Easton, J. W.; Abbott, A. A.; Graf, J. C.

    2012-01-01

    At NASA, there exists no standardized design or testing protocol for spacecraft fire suppression systems (either handheld or total flooding designs). An extinguisher's efficacy in safely suppressing any reasonable or conceivable fire is the primary benchmark. That concept, however, leads to the question of what a reasonable or conceivable fire is. While there exists the temptation to over-size' the fire extinguisher, weight and volume considerations on spacecraft will always (justifiably) push for the minimum size extinguisher required. This paper attempts to address the question of extinguisher size by examining how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or other accumulation of other combustion products (e.g. carbon monoxide). Estimates of these quantities are determined as a function of fire size and mass of material burned. This then becomes the basis for determining the maximum size of a target fire for future fire extinguisher testing.

  10. 三相泡沫防灭火新技术在峻德煤矿采空区灭火中的应用%Application of Three-phase Foam for Fire Extinguishing Technology in Junde Coal Mine Goal Outfire

    Institute of Scientific and Technical Information of China (English)

    李祥武

    2011-01-01

    Top-caving coal process is 2 to 5 times larger than layer mining with slow promoting, long-term floating coal gob in the combustion zone, fire prevention and control work is very difficult, three-phase foam for fire extinguishing technology is put forward and successful experiences of three-phase foam fire-fighting is introduced in the open area.%分析综采放顶煤工艺的采空区比分层开采的采空区大2~5倍,推进速度慢,采空区浮煤长期处于自燃带内,防灭火工作难度很大,提出采用三项泡沫防灭火新技术进行防灭火工作,介绍了利用三相泡沫开区灭火的成功经验.

  11. 75 FR 221 - Airworthiness Directives; Fire Fighting Enterprises Limited Portable Halon 1211 Fire...

    Science.gov (United States)

    2010-01-05

    ...-01-03] RIN 2120-AA64 Airworthiness Directives; Fire Fighting Enterprises Limited Portable Halon 1211 Fire Extinguishers as Installed on Various Transport Airplanes, Small Airplanes, and Rotorcraft AGENCY... the required specification, have been supplied to the aviation industry for use in fire extinguishing...

  12. Fire Extinguishing and Re-burning Prevention Technology for Extra-large Fully-mechanized Caving Face in Flammable Coal Seam%易燃煤层特大型综放工作面灭火及防复燃技术

    Institute of Scientific and Technical Information of China (English)

    石仓勇; 刘宝志; 王文强

    2014-01-01

    After the sealing of the fire area in 8101 extra-large fully mechanized face in Tongxin Mine, the spontaneous combustion was put out by driving a service roadway, drilling holes from the roadway into the fire area and injecting fly ash slurry and nitrogen gas from the holes into the fire area. After the reopening of the sealing area, the re-burning of the fire area was effectively controlled by taking some measures including changing the ventilation mode, reducing air quantity, blocking air leakage, nitrogen injection by buried pipes and gas control. This paper analyzed the cause and location of spontaneous combustion in the fully mechanized caving face, and summarized the fire extinguishing methods and effect of the sealed fire area in the fully mechanized caving face and the re-burning prevention method after the fire area reopening.%同忻煤矿8101特大型综放工作面自然发火封闭后,采用挖掘措施巷并在其中打钻孔注粉煤灰浆和采空区注氮等措施扑灭了火区,工作面启封后采取改变通风方式、减风、堵漏、小步距埋管注氮以及合理的防治瓦斯等措施,有效地防止了火区的复燃。分析了综放工作面自然发火的原因及地点,总结了综放工作面封闭灭火和启封后防复燃的方法及效果。

  13. 破碎围岩大采高回撤工作面防灭火工艺应用实践研究%Application of fire preventing and extinguishing technology in large mining height back face with broken surrounding rock

    Institute of Scientific and Technical Information of China (English)

    刘小明; 李立波; 崔峰

    2013-01-01

    破碎围岩环境下的大采高工作面开采空间大,顶板破碎范围广,采区空漏风率大,尤其是在工作面回撤期间采空区防灭火,是实现矿井安全生产的基础.以羊场湾煤矿Y120204大采高工作面回撤为工程实例,通过采用注氮防灭火,并辅以传统的灌浆、隔离墙等措施,在大采高破碎围岩工作面采空区组织实施防灭火,并严密监控了防灭火效果.现场实践表明,大采高工作面采空区火灾情况得到良好控制,该工艺对羊场湾以及宁东矿区其他大采高工作面采空区的防灭火管理具有借鉴意义.%Under the conditions of large mining height working face with the broken surrounding rock, the mining space is large, wide with broken roof, air leakage rate, especially the preventing fire in goaf during withdrawing face, is the base of realizing safety mine production. Based on the large mining height face withdrawing in Yangchangwan Coal Mine, through the use of nitrogen fire prevention and extinguishment, supplemented by traditional grouting, the wall measures, in the goaf of large mining height working face with broken surrounding rock to organize the implementation of fire prevention, and the effect of fire prevention and extinguishing are closely monitored. The field practice shows, the goaf fire in the large mining height working face could be well controlled, this process is of reference for Yangchangwan and other large mining height working face goaf fire prevention management in Ningdong mining area.

  14. A national cohesive wildland fire management strategy

    Science.gov (United States)

    Forest Service U.S. Department of Agriculture; Office of Wildland Fire Coordination. Department of the Interior

    2011-01-01

    Addressing wildfire is not simply a fire management, fire operations, or wildland-urban interface problem - it is a larger, more complex land management and societal issue. The vision for the next century is to: Safely and effectively extinguish fire, when needed; use fire where allowable; manage our natural resources; and as a Nation, live with wildland fire. Three...

  15. 浅析哈萨克斯坦石油化工装置消防设计%Analysis of fire protection design of petrochemical equipments in Kazakhstan

    Institute of Scientific and Technical Information of China (English)

    马友梅

    2016-01-01

    There are lots of differences between the fire protection requirements of petrochemical equip-ments in China and Kazakhstan which mentioned in the codes and routines for fire protection design. The code for fire protection design of petrochemical equipments in Kazakhstan was introduced; besides, the differences be-tween the codes and routines for fire protection of petrochemical equipments in Kazakhstan and China were ana-lyzed and compared from aspects of fire-fighting cooling water system; foam extinguishing system, steam-smoth-ering system;dry powder extinguishing system;automatic gas extinguishing system and fire demand determination.%在石油化工装置的消防设计上,哈萨克斯坦与国内在设计规范及设计惯例等方面存在诸多差异。介绍了哈萨克斯坦石油化工装置消防规范,并从消防冷却水系统、泡沫灭火系统、蒸汽灭火系统、干粉灭火系统、自动气体灭火系统及消防用水量确定等方面,分析比较了哈萨克斯坦与国内石油化工装置消防设计规范及设计惯例的不同之处。

  16. Evaluation of Suppression of Hydroprocessed Renewable Jet (HRJ) Fuel Fires with Aqueous Film Forming Foam (AFFF)

    Science.gov (United States)

    2011-07-01

    AFRL-RX-TY-TR-2011-0101 EVALUATION OF SUPPRESSION OF HYDROPROCESSED RENEWABLE JET (HRJ) FUEL FIRES WITH AQUEOUS FILM FORMING FOAM ( AFFF ...Forming Foam ( AFFF ) has the capability of extinguishing HRJ fuel fires and HRJ/JP-8 blended fuel fires . The assessment included extinguishment...whether existing aqueous film- forming foam ( AFFF ) firefighting agents and equipment are capable of extinguishing alternative- fuel fires or

  17. 某高层酒店建筑自动喷水灭火系统设计审核评析%Evaluation and analysis of the automatic water-spraying fire-extinguishing system design and supervision of the high-rise hotel building

    Institute of Scientific and Technical Information of China (English)

    赵方强

    2016-01-01

    The article analyzes the high-rise building fire hazards. Combining with the high-rise hotel building engineering,starting from aspects of sprinkler nozzle selection,alarm valve and pipeline,and systematical design flow,it examines and evaluates the automatic water-spraying fire-extinguishing system of the high-rise hotel building,which will be good for guaranteeing the fire-fighting safety of the high-rise hotel building.%分析了高层建筑火灾的危险性,结合某高层酒店工程,从喷头选择、报警阀组与管道、系统设计流量等方面,对高层酒店的自动喷水灭火系统进行了审核评析,有利于保证高层酒店建筑的消防安全。

  18. The Environmental Impacts of Fire-Fighting Foams

    Science.gov (United States)

    Tureková, Ivana; Balog, Karol

    2010-01-01

    Extinguishing foams are commonly used for extinguishing the fire of flammable liquids, whereby their insulating, choking and quenching effects are exploited. The purpose of the paper is to consider and compare the foams currently used in fire departments, regarding mainly their high extinguishing effect (capability of faster aborted burning on the large surface at low foam consumption), but also their impact on the environment in each stage of their life cycle.

  19. 46 CFR 185.612 - Fire protection equipment.

    Science.gov (United States)

    2010-10-01

    ... space served. (d) An alarm for an automatic sprinkler system must be conspicuously marked in clearly... instructions for the operation of a fixed gas fire extinguishing system must be located in a conspicuous place... a fixed gas fire extinguishing system must be clearly and conspicuously marked “WHEN ALARM...

  20. 29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

    Science.gov (United States)

    2010-07-01

    ....160. This section does not apply to automatic sprinkler systems which are covered under § 1910.159. (b... working and that no emergency egress is permitted through the drainage path. Other Fire Protection Systems ... 29 Labor 5 2010-07-01 2010-07-01 false Fixed extinguishing systems, water spray and foam....

  1. SEM Characterization of Extinguished Grains from Plasma-Ignited M30 Charges

    Science.gov (United States)

    Kinkennon, A.; Birk, A.; DelGuercio, M.; Kaste, P.; Lieb, R.; Newberry, J.; Pesce-Rodriguez, R.; Schroeder, M.

    2000-01-01

    M30 propellant grains that had been ignited in interrupted closed bomb experiments were characterize by scanning electron microscopy (SEM). Previous chemical analysis of extinguished grains had given no indications of plasma-propellant chemical interactions that could explain the increased burning rates that had been previously observed in full-pressure closed bomb experiments. (This does not mean that there is no unique chemistry occurring with plasma ignition. It may occur very early in the ignition event and then become obscured by the burning chemistry.) In this work, SEM was used to look at grain morphologies to determine if there were increases in the surface areas of the plasma-ignited grains which would contribute to the apparent increase in the burning rate. Charges were made using 30 propellant grains (approximately 32 grams) stacked in two tiers and in two concentric circles around a plastic straw. Each grain was notched so that, when the grains were expelled from the bomb during extinguishment, it could be determined in which tier and which circle each grain was originally packed. Charges were ignited in a closed bomb by either a nickel wire/Mylar-capillary plasma or black powder. The bomb contained a blowout disk that ruptured when the pressure reached 35 MPa, and the propellant was vented into a collection chamber packed with polyurethane foam. SEM analysis of the grains fired with a conventional black powder igniter showed no signs of unusual burning characteristics. The surfaces seemed to be evenly burned on the exteriors of the grains and in the perforations. Grains that had been subjected to plasma ignition, however, had pits, gouges, chasms, and cracks in the surfaces. The sides of the grains closest to the plasma had the greatest amount of damage, but even surfaces facing the outer wall of the bomb had small pits. The perforations contained gouges and abnormally burned regions (wormholes) that extended into the web. The SEM photos indicated that

  2. Investigation of the Conjugate Heat and Mass Transfer at Ignition and Subsequent Nonstationary Erosion Combustion of Powders Under Conditions Close to Those of Firing a Shot

    Science.gov (United States)

    Rusyak, I. G.; Lipanov, A. M.

    2016-11-01

    The laws of combustion of powders under conditions close to those of firing an artillery shot have been investigated. A solid-state local heat ignition model was used, and the process of powder combustion was simulated on the basis of the notions of the Belyaev-Zel'dovich thermal combustion theory. The complete formulation of the combustion problem includes the nonstationary processes of heat propagation and chemical transformation in the k-phase, as well as the quasi-stationary processes in the chemically reacting two-stage turbulent boundary layer near the combustion surface related to the characteristics of the averaged nonstationary flow by the boundary conditions at the outer boundary of the boundary layer. The features of the joint solution of the equations of the thermal combustion theory and the equations of internal ballistics have been analyzed. The questions on the convergence of the conjugate problem have been considered. The influence of various factors on the rate of combustion of powder has been investigated. The investigations conducted enabled us to formulate an approximate method for calculating the nonstationary and erosion rates of combustion of artillery powders at a shot on the basis of the Lenouard-Robillard-Karakozov approach.

  3. Controlling fires in silver/zinc batteries

    Science.gov (United States)

    Boshers, W. A.; Britz, W. A.

    1977-01-01

    Silver/zinc storage battery fires are often difficult to extinguish. Improved technique employs manifold connected to central evacuation chamber to rapidly vent combustion-supporting gases generated by battery plate oxides.

  4. Analysis of the Water Supply System and Fire Extinguisher Systems in Colleges Students Dormitories%浅析高校学生宿舍给水与消防系统

    Institute of Scientific and Technical Information of China (English)

    张绍萍

    2014-01-01

    This article analyzes and researches the water sup-ply system and automatic water spray and fire-fighting system of col ege student’s dormitories, and discusses the optimized model of the water supply system and safety system, so as to provide some advices to the water supply and fire fighting system in col ege students' dormitory, and ensure the safety of university students' dormitory.%本文针对高校学生住宿给水和高层学生宿舍室内应用自动喷水灭火系统进行分析研究,探讨给水系统和安全系统最优模式,从而为高校学生宿舍给水和消防系统提供意见,保障高校学生宿舍的安全。

  5. Research on Fire Prevention and Extinguishing of Fully Mechanized Top Coal Caving Face in High Gas and Inflammable Coal Seam%高瓦斯易燃煤层综放工作面的防灭火研究

    Institute of Scientific and Technical Information of China (English)

    昝平

    2014-01-01

    为了有效控制易自燃煤层放顶煤工作面自然发火,通过对煤自然发火机理的研究,以某矿8826放顶煤综采工作面为例,分析了低位放顶煤工作面采有三种防灭火技术进行防灭火的具体方案,优化出高效率、低投入、可操作性强的三相泡沫防灭火技术措施,以更好地防止煤层自燃,值得推广使用。%To effectively control the spontaneous combustion of top coal caving mining faces with spontaneous combustion coal seam,based on the research of the mechanism of coal spontaneous combustion,the coal spontaneous combustion is analyzed by taking 8826 fully mechanized top coal caving face of a coal mine as the example.The ad-vantages and disadvantages are discussed in implementation process of various fire-fighting technology of low caving working face,three-phase foam fire-fighting technical measures of high efficiency,low cost and strong operability are optimized,in order to better prevent the spontaneous combustion of coal seam.

  6. All fired up

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    Members of the Directorate and their support staff took part in a fire-fighting course organised by the CERN Fire Brigade just before the end-of-year break.  The Bulletin takes a look at the fire-fighting training on offer at CERN.   At CERN the risk of fire can never be under-estimated. In order to train personnel in the use of fire extinguishers, CERN's fire training centre in Prévessin acquired a fire-simulation platform in 2012. On the morning of 17 December 2012, ten members of the CERN directorate and their support staff tried out the platform, following in the footsteps of 400 other members of the CERN community who had already attended the course. The participants were welcomed to the training centre by Gilles Colin, a fire-fighter and instructor, who gave them a 30-minute introduction to general safety and the different types of fire and fire extinguishers, followed by an hour of practical instruction in the simulation facility. There they were able to pract...

  7. 46 CFR 105.35-5 - Fire pumps.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fire pumps. 105.35-5 Section 105.35-5 Shipping COAST... VESSELS DISPENSING PETROLEUM PRODUCTS Fire Extinguishing Equipment § 105.35-5 Fire pumps. (a) All vessels shall be provided with a hand operated portable fire pump having a capacity of at least 5 gallons...

  8. Automatic Fire Detection: A Survey from Wireless Sensor Network Perspective

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, N.; Havinga, P.J.M.

    2008-01-01

    Automatic fire detection is important for early detection and promptly extinguishing fire. There are ample studies investigating the best sensor combinations and appropriate techniques for early fire detection. In the previous studies fire detection has either been considered as an application of a

  9. 46 CFR 108.419 - Fire main capacity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fire main capacity. 108.419 Section 108.419 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems Fire Main System § 108.419 Fire main capacity. The diameter of the...

  10. 46 CFR 108.405 - Fire detection system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fire detection system. 108.405 Section 108.405 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems § 108.405 Fire detection system. (a) Each fire detection system...

  11. Automatic Fire Detection: A Survey from Wireless Sensor Network Perspective

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, Nirvana; Havinga, Paul J.M.

    2008-01-01

    Automatic fire detection is important for early detection and promptly extinguishing fire. There are ample studies investigating the best sensor combinations and appropriate techniques for early fire detection. In the previous studies fire detection has either been considered as an application of a

  12. Fast and Accurate Residential Fire Detection Using Wireless Sensor Networks

    NARCIS (Netherlands)

    Bahrepour, M.; Meratnia, Nirvana; Havinga, Paul J.M.

    2010-01-01

    Prompt and accurate residential fire detection is important for on-time fire extinguishing and consequently reducing damages and life losses. To detect fire sensors are needed to measure the environmental parameters and algorithms are required to decide about occurrence of fire. Recently, wireless

  13. Water mist fire protection system in subway application%细水雾灭火系统在城市轨道交通中的应用

    Institute of Scientific and Technical Information of China (English)

    朱世敏

    2012-01-01

    通过比较细水雾灭火系统与气体灭火系统的不同,结合细水雾灭火系统在地铁的应用研究,阐述细水雾灭火系统作为一种既高效又节能的灭火系统可替代气体灭火系统在地铁的设备管理用房等部位使用.%through the comparison of water mist fire extinguishing system and gas fire extinguishing system, combined with the water mist fire extinguishing system in metro applied research, elaborated that water mist fire extinguishing system as a kind of efficient and energy-saving fire extinguishing system can replace the gas fire extinguishing system in metro equipment management with real parts using.

  14. DETERMINATION OF PERFLUOROCARBOXYLATES IN GROUNDWATER IMPACTED BY FIRE-FIGHTING ACTIVITY. (R821195)

    Science.gov (United States)

    Perfluorinated surfactants are used in aqueous film forming foam (AFFF) formulations, which are used to extinguish hydrocarbon-fuel fires. Virtually nothing is known about the occurrence of perfluorinated surfactants in the environment, in particular, at fire-train...

  15. Aviation Engine Test Facilities (AETF) fire protection study

    Science.gov (United States)

    Beller, R. C.; Burns, R. E.; Leonard, J. T.

    1989-07-01

    An analysis is presented to the effectiveness of various types of fire fighting agents in extinguishing the kinds of fires anticipated in Aviation Engine Test Facilities (AETF), otherwise known as Hush Houses. The agents considered include Aqueous Film-Forming Foam, Halon 1301, Halon 1211 and water. Previous test work has shown the rapidity with which aircraft, especially high performance aircraft, can be damaged by fire. Based on this, tentative criteria for this evaluation included a maximum time of 20 s from fire detection to extinguishment and a period of 30 min in which the agent would prevent reignition. Other issues examined included: toxicity, corrosivity, ease of personnel egress, system reliability, and cost effectiveness. The agents were evaluated for their performance in several fire scenarios, including: under frame fire, major engine fire, engine disintegration fire, high-volume pool fire with simultaneous spill fire, internal electrical fire, and runaway engine fire.

  16. Extinguishing ELMs in detached radiative divertor plasmas

    Science.gov (United States)

    Pigarov, Alexander; Krasheninnikov, Sergei; Rognlien, Thomas

    2016-10-01

    In order to avoid deleterious effects of ELMs on PFCs in next-step fusion devices it has been suggested to operate with small-sized ELMs naturally extinguishing in the divertor. Our modeling effort is focusing at extinguishing type-I ELMs: conditions for expelled plasma dissipation; efficiency of ELM power handling by detached radiative divertors; and the ELM impact on detachment state. Here time-dependent modeling of a sequence of many ELMs was performed with 2-D edge plasma transport code UEDGE-MB-W which incorporates the Macro-Blob (MB) approach to simulate non-diffusive filamentary transport and various ``Wall'' (W) models for time-dependent hydrogen wall inventory and recycling. Three cases were modeled, in which extinguishing ELMs are achieved due to: (i) intrinsic impurities via graphite sputtering, (ii) extrinsic impurity gas puff (Ne), and (iii) =(i) +(ii). For each case, we performed a series of UEDGE-MB-W runs scanning the deuterium and impurity inventories, pedestal losses and ELM frequency. Temporal variations of the degree of detachment, ionization front shape, recombination sink strength, radiated fraction, peak power loads, OSP, impurity charge states, and in/out asymmetries were analyzed. We discuss the onset of extinguishing ELMs, conditions for not burning through and enhanced plasma recombination as functions of scanned parameters. Efficiencies of intrinsic and extrinsic impurities in ELM extinguishing are compared.

  17. STS-35 Pilot Gardner during fire fighting exercises at JSC fire training pit

    Science.gov (United States)

    1990-01-01

    STS-35 Pilot Guy S. Gardner extinguishes a small blaze during a fire handling training session for crewmembers at JSC Fire Training Pit across from the Gilruth Center Bldg 207. Wearing a navy blue flight suit, Gardner approaches fire while operating a fire extinguisher as Commander Vance D. Brand (far right) and Payload Specialist Samuel T. Durrance look on. The crew was briefed on types of potential blazes and the correct means of controlling each type. STS-35 will mark the first seven-member crew staffing since the Challenger accident of January 1986.

  18. STS-35 crewmembers during fire fighting exercises at JSC fire training pit

    Science.gov (United States)

    1990-01-01

    STS-35 crewmembers extinguish a small blaze during a fire handling training session at JSC Fire Training Pit across from the Gilruth Center Bldg 207. Wearing navy blue flight suits, Mission Specialist (MS) Robert A.R. Parker (second right) and MS John M. Lounge (third left) approach fire while operating a fire extinguishers. The crew was briefed on types of potential blazes and the correct means of controlling each type. Also pictured are (left to right) Commander Vance D. Brand, Payload Specialist Samuel T. Durrance, Pilot Guy S. Gardner, and training officer Al Putnam. STS-35 will mark the first seven-member crew staffing since the Challenger accident of January 1986.

  19. Fire and explosion hazards of oil shale

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The US Bureau of Mines publication presents the results of investigations into the fire and explosion hazards of oil shale rocks and dust. Three areas have been examined: the explosibility and ignitability of oil shale dust clouds, the fire hazards of oil shale dust layers on hot surfaces, and the ignitability and extinguishment of oil shale rubble piles. 10 refs., 54 figs., 29 tabs.

  20. Fire and explosion hazards of oil shale

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The US Bureau of Mines publication presents the results of investigations into the fire and explosion hazards of oil shale rocks and dust. Three areas have been examined: the explosibility and ignitability of oil shale dust clouds, the fire hazards of oil shale dust layers on hot surfaces, and the ignitability and extinguishment of oil shale rubble piles. 10 refs., 54 figs., 29 tabs.

  1. 46 CFR 122.612 - Fire protection equipment.

    Science.gov (United States)

    2010-10-01

    ...”. (e) An alarm for an automatic fire detecting system or a manual alarm system must be conspicuously marked in clearly legible letters “FIRE ALARM”. (f) An alarm for an automatic sprinkler system must be... fixed gas fire extinguishing system must be located in a conspicuous place at or near each pull box...

  2. 46 CFR 76.05-1 - Fire detecting systems.

    Science.gov (United States)

    2010-10-01

    ... fitted with an automatic sprinkling system, except in relatively incombustible spaces. 2 Sprinkler heads... 46 Shipping 3 2010-10-01 2010-10-01 false Fire detecting systems. 76.05-1 Section 76.05-1 Shipping... Fire Detecting and Extinguishing Equipment, Where Required § 76.05-1 Fire detecting systems....

  3. Images of Ice and Fire in Jane Eyre

    Institute of Scientific and Technical Information of China (English)

    李秀美

    2011-01-01

    Ice and fire are originally natural phenomena, but in Jane Eyre,they arc raised from natural phenomena to meaningful images. The images of ice and fire are embodied through four aspects: psychological description, portrait description, word painting and detailed description. Fire represents Jane's passions, anger, and spirit, while ice symbolizes the oppressive forces trying to extinguish Jane's vitality.

  4. 46 CFR 108.413 - Fusible element fire detection system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fusible element fire detection system. 108.413 Section 108.413 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems § 108.413 Fusible element fire detection...

  5. 46 CFR 108.404 - Selection of fire detection system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Selection of fire detection system. 108.404 Section 108.404 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems § 108.404 Selection of fire detection system. (a) If...

  6. Experimental studies on interaction of water mist with class K fires

    Institute of Scientific and Technical Information of China (English)

    FANG Yudong; ZHANG Yongfeng; LIN Lin; LIAO Guangxuan; HUANG Xin; CONG Beihua

    2006-01-01

    Interaction of water mist with cooking oil fires is studied experimentally and theoretically. A LDV/APV system is used to measure the velocity and diameter of water mist at different pressures in the experiments, and the effect of water mist velocity and diameter on fire extinguishment efficiency is investigated. The experimental results show that water mist has excellent surface cooling effect; it can control and extinguish cooking oil fires quickly without re-ignition.The critical temperature (Tfo) is calculated by energy balance equation, and the fire plume momentum is calculated and compared with that of water mist in order to determine the critical velocity (Vwy) of fire extinguishment. This paper provides references for cooking oil fires extinguishment with water mist.

  7. State and future outlook for improvement in endogeneous fire prevention in mines

    Energy Technology Data Exchange (ETDEWEB)

    Belaventsev, L.P.; Miller, Yu.A.; Boldin, V.A. (VostNII (USSR))

    1990-06-01

    Deals with the problem of fighting endogenous fires in the Prokop'evsk-Kiselovsk region of the Kuzbass where at deeper horizons the accident rate increased by 1.3 times (at the 2nd horizon) or by 2.7 times (at the 4th horizon), coal loss increased by 50% and the danger of endogeneous fires increased by 1.5 times. Only 5-7 % of total coal winning in the Prokop'evskgidrougol' association (where all mines work under extinguished fire beds) is conducted with stowing, which is the best method of fire prevention. The following measures are recommended for mine design: using the safest technologies, steady ventilation air streams and reduced depression. Fire prevention methods developed at VostNII are presented. Application of antipyrogens (urea, gel-forming compounds containing silicates of alkali metals) and salts of strong acids foamed with nitrogen, aerosols and powders is discussed. The number of endogenous fires in the Kuzbass decreased slowly (by 24%) over 1986-1989 as compared with other regions (by 41-47% during the same time period).

  8. 29 CFR 1910.157 - Portable fire extinguishers.

    Science.gov (United States)

    2010-07-01

    ... retain this record for one year after the last entry or the life of the shell, whichever is less. The... equipment for testing compressed gas type cylinders shall be of the water jacket type. The equipment shall...

  9. 33 CFR 127.603 - Portable fire extinguishers.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Firefighting § 127.603 Portable...

  10. A Review of the Toxicology of Halogenated Fire Extinguishing Agents

    Science.gov (United States)

    1974-11-01

    the triggering and abolition of arrhythmias during a similar exposure by the constriction and release, respectively, of the thoracic aorta. 12...0+ +" . "- 7 " ’ 4... .i : ’: - !. Figure 2.5 A left lumbar sympathectomy was performed on the dog used in this experiment one week prior to

  11. Phase II: Fire Extinguishment by Electro-Magnetic Fields

    Science.gov (United States)

    2012-06-19

    is an atmospheric pressure glow discharge (albeit at high currents). The reason is that the size of the cathode spot is not restricted. The result is... discharge . This can only happen in the form of a (non-self- sustaining) corona discharge . Such a current is too small to deplete the large 4 µF... discharges , in series. In this special case the corona discharge in the gap of the disk coil acts like a limiting ohmic resistor for the build-up of the

  12. 空间站手提式细水雾灭火器的研究%Research on the Portable Water Mist Extinguisher for Space Station

    Institute of Scientific and Technical Information of China (English)

    蒋卓; 刘银水; 毛旭耀; 唐辉; 朱玉泉

    2011-01-01

    火灾是载人航天器运行过程中最重大的危险之一,目前载人航天器中各种灭火方式均有其弊端。细水雾灭火具有环境友好、灭火效率高等优点。通过分析对比现有国内外细水雾灭火器,针对空间站的特殊环境要求,研究了一种活塞式手提细水雾灭火器,其具有结构和制造工艺简单,喷射剩余率小,寿命长,可靠性高等特点。%Fire is one of the fatal dangers on manned spacecraft. Every existing fire extinguishing manner has its own drawback, whereas the water mist fire extinguisher possesses the advantages of environment-friendliness and high efficiency. Through the analysis and comparison of water mist fire extinguishers home and abroad, a piston portable water mist fire extinguisher is studied under the special environment requirement of microgravity. It qualifies such advantages as compact configuration, simple manufacturing process, low remain rate, long life span and high reliability.

  13. Evaluation of Suppression of Synthetic Paraffinic Kerosene (SPK) Fuel Fires with Aqueous Film Forming Foam (AFFF)

    Science.gov (United States)

    2009-12-01

    FIRES WITH AQUEOUS FILM FORMING FOAM ( AFFF ...performance of Aqueous Film-Forming Foam ( AFFF ) on synthetic fuel fires to aid Air Force firefighters’ response to an incident. Results show that AFFF can...hydrocarbons. Aqueous Film Forming Foam ( AFFF ) is used by Air Force fire departments to extinguish fuel spill fires involving jet fuel (JP-8), diesel,

  14. 14 CFR 23.855 - Cargo and baggage compartment fire protection.

    Science.gov (United States)

    2010-01-01

    ... Design and Construction Fire Protection § 23.855 Cargo and baggage compartment fire protection. (a... protection. 23.855 Section 23.855 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... the contents of a hand held fire extinguisher, or (2) Be equipped with a smoke or fire detector...

  15. 46 CFR 108.407 - Detectors for electric fire detection system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Detectors for electric fire detection system. 108.407... DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems § 108.407 Detectors for electric fire detection system. (a) Each detector in an electric fire detection system must be located where— (1)...

  16. Measures Improving the Reliability of Automatic Spraying Extinguishing System%提高自动喷淋灭火系统可靠性的措施研究

    Institute of Scientific and Technical Information of China (English)

    黄正

    2011-01-01

    Sprinkler system occupies an important position in fire extinguishing system, known as the most effective means of fire. This paper analyzed related factors influencing the reliability of automatic spraying extinguishing system, proposed several measures on improving the reliability of automatic spraying extinguishing system.%自动喷淋系统在消防灭火系统中占据着重要位置,被称为最有效的灭火手段.本文在时影响自动喷淋灭火系统可靠性的相关因素进行分析的基础上,提出了提高自动喷淋灭火系统的可靠性的几项措施..

  17. The feasibility demonstration of fire compartment designation in a ruins%某遗址防火分区设计可行性论证

    Institute of Scientific and Technical Information of China (English)

    于海涛

    2011-01-01

    牛河梁遗址Ⅱ地点钢结构保护棚建筑为例,分4个场景模拟烟气运动及人员疏散,评估人员疏散的安全性.结果显示人员可以安全疏散.为提高安全性,建议各附属用房采用耐火极限大于3.0 h的防火墙、耐火极限大于1.5 h楼板、防火窗和甲级防火门,并设置超细干粉悬挂式自动灭火装置,防止火灾向其他区城的蔓延.%Base on steel protection shell of the Ⅱ district of Ni uHeLiang ruins, four scenarios were set to simulate the smoke movement and evacuation to evaluate the safety of evacuation. The evacuation is safe according to the simulation results. Sug gestions were put forward to increase the safety and to prevent the fire spread to the other area like, using fire wall which fire resistance is longer than 3 h, using floor and fire window and class A fire door which fire resistance are longer than 1. 5 h, setting suspended Ultrafine powder automatic fire extinguishing devices.

  18. A mathematical model of the temperature in a coalfield fire area

    Institute of Scientific and Technical Information of China (English)

    LU Guo-dong; ZHOU Xin-quan; JIANG Jie

    2008-01-01

    The regular pattern of temperature change in a coalfield fire area while the fire is being extinguished was studied. To determine the extinguishing effect, a series of linear, logarithmic, polynomial or exponential mathematical regression models were constructed using the observed temperature data from the Xinjiang coalfield fire extinguishing project. The quadratic polynomial mathematical model had the best fit. A large coal fire oven was also used to simulate the coal fire extinguishing process. The same mathematical regression experiments were carried out on that observed data. The results verified that the quadratic polynomial ma-thematical model had the best fit. Therefore, a quadratic polynomial mathematical model is proposed to accurately model the tem-perature-time relationship in a coalfield fire area. An application to coalfield fire suppression shows that the deduced mathematical model can be used to predict the temperature conditions and to determine the effect of fire extinguishing, thereby helping to speed up the fire suppression process in the coalfield fire area.

  19. 含氟灭火剂受热释放HF及抑制技术研究进展%Research progress of Hydrogen Fluoride Releasing of Heated Fluoride Containing Extinguishing and the Suppression Technique

    Institute of Scientific and Technical Information of China (English)

    李云龙; 杜建科; 牛世栋

    2015-01-01

    含氟灭火剂已成为目前最常用的清洁气体灭火剂,但含氟灭火剂在灭火过程中HF释放的问题严重。综合分析了几种含氟灭火剂热解和遇火时的HF释放量及其影响因素,结合理论分析结果讨论了含氟灭火剂的HF释放机理,探讨了抑制含氟灭火剂HF释放量的技术措施,从而有效减少含氟灭火剂使用时HF的释放量,保证火场中人员和精密仪器的安全。%At present fluorine-containing fire extinguishing agent has become the most commonly used clean gas fire extinguishing agent. But the HF releasing problem is becoming more and more serious when fluorine-containing fire extinguishing agent works. This paper analyzes some influencing factors when fluorine-containing fire agents start to fire. And HF releasing mechanism is discussed combining the result of certain theories. Also it studies some techni-cal measures to restrain HF releasing. So,to ensure the safety of personnel and precision instruments in the fire,we should reduce the HF releasing from the fluorine-containing fire extinguishing agent.

  20. Firing test study on the Mg/CO2 powdered rocket motor%Mg粉/CO2粉末火箭发动机点火试验研究

    Institute of Scientific and Technical Information of China (English)

    姚亮; 胡春波; 肖虎亮; 徐义华; 何国强

    2011-01-01

    A powdered rocket was preliminary designed,with Mg powder as fuel and CO2 oxidant for firing test. The results show that powder fuel can be rapidly ignited with air under certain pressure and temperature. And after air supplying was stopped,combustion of Mg/CO2 sustained. Most of deposition on chamber wall was white MgO, and some is unbumed Mg. This test may verify the feasibility of Mg/CO2 powdered rocket motor.%初步设计了粉末火箭发动机,并以Mg粉作为燃料、CO2作为氧化剂进行了点火试验.研究结果表明,在一定的压强和温度下,利用空气与Mg粉的燃烧放热可成功引燃Mg粉/CO2,且在关闭空气后达到自持燃烧;燃烧室壁面沉积较多,主要以MgO为主,还有一部分未燃烧的Mg;通过该试验验证了Mg粉/CO2粉末火箭发动机方案的可行性.

  1. Reinstatement of an Extinguished Fear Conditioned Response in Infant Rats

    Science.gov (United States)

    Revillo, Damian A.; Trebucq, Gastón; Paglini, Maria G.; Arias, Carlos

    2016-01-01

    Although it is currently accepted that the extinction effect reflects new context-dependent learning, this is not so clear during infancy, because some studies did not find recovery of the extinguished conditioned response (CR) in rodents during this ontogenetic stage. However, recent studies have shown the return of an extinguished CR in infant…

  2. 30 CFR 77.1916 - Welding, cutting, and soldering; fire protection.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Welding, cutting, and soldering; fire... OF UNDERGROUND COAL MINES Slope and Shaft Sinking § 77.1916 Welding, cutting, and soldering; fire protection. (a) One portable fire extinguisher shall be provided where welding, cutting, or soldering...

  3. 46 CFR 108.409 - Location and spacing of tubing in pneumatic fire detection system.

    Science.gov (United States)

    2010-10-01

    ... detection system. 108.409 Section 108.409 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire Extinguishing Systems § 108.409 Location and spacing of tubing in pneumatic fire detection system. (a) All tubing in a pneumatic fire...

  4. Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure

    Science.gov (United States)

    Karunakaran, S.; Majid, D. L.; Mohd Tawil, M. L.

    2016-10-01

    This study investigates the flammability properties of kenaf fiber reinforced acrylonitrile butadiene styrene (ABS) with nanoclays composites. Natural fiber is one of the potential materials to be used with thermoplastic as a composite due to its attractive properties such as lightweight and strong. In this paper, flammability properties of this material are evaluated through Underwriters Laboratory 94 Horizontal Burning (UL94 HB), which has been conducted for both controlled and uncontrolled conditions, smoke density and limiting oxygen index tests (LOI). These flammability tests are in compliance with the Federal Aviation Regulation (FAR) requirement. The results from UL94 HB and smoke density tests show that the presence of nanoclays with effective composition of kenaf fiber reinforced ABS has enhanced the burning characteristics of the material by hindering propagation of flame spread over the surface of the material through char formation. Consequently, this decreases the burning rate and produces low amount of smoke during burning. On contrary, through LOI test, this material requires less oxygen to burn when exposed to fire, which hinders the enhancement of burning characteristics. This is due to burning mechanism exhibited by nanoclays that catalyzes barrier formation and flame propagation rate over the surface of the biocomposite material. Overall, these experimental results suggest that this biocomposite material is capable of self-extinguishing and possesses effective fire extinction. The observed novel synergism from the result obtained is promising to be implemented in secondary structures of aircraft with significant benefits such as cost-effective, lightweight and biodegradable self-extinguishing biocomposite.

  5. Halon Gas and Library Fire Protection.

    Science.gov (United States)

    Pacey, Antony

    1991-01-01

    Describes the operation of halon gas fire extinguishing systems, which have been installed in a number of libraries and archives across Canada where protection of special collections from water and mold damage resulting from operation of a standard water sprinkler system is paramount. The advantages and disadvantages of this type of system are…

  6. 可调煤粉浓度燃烧装置内的流动特性分析%Analysis on flow feature of adjustable coal powder density in coal-fired combustion device

    Institute of Scientific and Technical Information of China (English)

    于静梅; 郭仁宁

    2009-01-01

    针对某电厂燃煤种类多变而导致结焦严重状况,对煤粉分离装置进行改造并进行了数值模拟,采用RNG K-3模型和颗粒轨道模型为理论模型,对改造前后进行分析得到了速度场和浓度分布,改造后有利于在向火侧得到更高的煤粉浓度,有利于燃烧,对于指导运行有一定的帮助.%According to the serious coking status caused by the multi kind coal and variation in a coal-fired power plant, a reconstruction and numerical simulation were made for the coal powder separation device.With the RNG K-3 model and the particle trace model as the theoretical model,the speed field and the density distribution were obtained from the analysis before and after the reconstruction.After the reconstruction,it was favorable to obtain the higher coal powder density at the firing side and it was favorable for the coal combustion which could provide the certain assistance to guide the operation.

  7. Software fires detection and extinction for forest

    Directory of Open Access Journals (Sweden)

    Juan Carlos García Seco

    2008-12-01

    Full Text Available This article shows the most usual fire detection and forest extinction application technologies at present. We will see all different methods used by these applications that can be found in the Market and some examples. Also, some basic questions about the most influent parameters when a fire must be extinct are shown. Finally, after having shown all the technologies, we will build a model about an intelligent system which not only detects, but also extinguish wildfires.

  8. Fire Resistant Fuel Program Update

    Science.gov (United States)

    2011-09-13

    38°F Flashpoint • Objectives – developing new emulsified fuel formulations; – investigating anti-mist additives to diminish the fuel fireball ...unreacted diethanolamine. UNCLASSIFIED UNCLASSIFIED Current FRF Formulation – Mist Control Additive (MCA) – (125-250 ppm) reduces initial fireball ...size which results in reduced fireball size UNCLASSIFIED UNCLASSIFIED Current FRF Formulation – Water reduces or extinguishes pool fuel fires (10 vol

  9. Fine water spray system: Extinguishing tests in medium and full-scale turbine hood

    Science.gov (United States)

    Wighus, R.; Aune, P.; Drangsholt, G.; Stensaas, J. P.

    1994-12-01

    The report is based on the results from two test series, called Phase 1 and Phase 2 of the project 'Halon Replacement by Fine Water Spray Technology - Turbine Hood application'. Detailed results are presented in technical reports from Phase 1 and Phase 2. The tests were carried out in two different scales, one 30 cu m test enclosure formerly used to characterize different water spray nozzles, and a full scale 70 cu m model of a turbine hood. The scope of work in Phase 1 was to identify the extinguishing characteristics of various nozzles developed by BP Sunbury Research Center, UK, and to verify the efficiency of a total fire suppression system developed by Ginge-Kerr Offshore. The fire suppression system uses a twin-fluid nozzles using air and water at pressures about 5 bar. The nozzles produce a water spray with small droplets and high velocity. The scope of work of Phase 2 was to verify the efficiency of the Fine Water Spray nozzles fighting a variety of fire scenarios which may occur in a real turbine hood. A full scale test enclosure containing a mock-up of a turbine heated internally to simulate hot metal surfaces, with insulation mats and piping as in a real turbine hood was constructed in the large test hall of SINTEF NBL. The turbine hood model was built by elements of a Multipurpose Fire Test Rig. Realistic fires with Diesel pool- and spray fires, fires in insulation mats soaked with Diesel oil under different ventilation conditions were ignited in the turbine hood model. Number of Fine Water Spray nozzles, nozzle position and spraying sequences were varied. A base for design of a Fine Water Spray system for a turbine hood is developed, and several unique features of the performance of a Fine Water Spray fire suppression system have been documented.

  10. Practical application of pressure regulating technology for fire district in Meiyukou Coal Mine

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qing-feng; JIA Bao-shan

    2008-01-01

    Based on the simulated laboratory experiment of pressure balance for fire ex-tinguishing, the pressure regulating technology was summarized for the fire district in Meiyukou Coal Mine. The technology includes three measures for air pressure regulation, namely applying the pressure regulating chamber to balance the air pressure of fire district, increasing the air pressure of the working face, and filling the ground surface fractures. A good effect was obtained to prevent and extinguish the fire. When the measures fail to in-crease the pressure of working face or to regulate that of air chamber, the measure to fill the ground surface fractures will play an important role.

  11. Practical application of pressure regulating technology for fire district in Meiyukou Coal Mine

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qing-feng; JIA Bao-shan

    2008-01-01

    Based on the simulated laboratory experiment of pressure balance for fire extinguishing,the pressure regulating technology was summarized for the fire district in Meiyukou Coal Mine.The technology includes three measures for air pressure regulation,namely applying the pressure regulating chamber to balance the air pressure of fire district,increasing the air pressure of the working face,and filling the ground surface fractures.A good effect was obtained to prevent and extinguish the fire.When the measures fail to increase the pressure of working face or to regulate that of air chamber,the measure to fill the ground surface fractures will play an important role.

  12. 29 CFR 1910.161 - Fixed extinguishing systems, dry chemical.

    Science.gov (United States)

    2010-07-01

    ... they are used. (2) The employer may not mix together dry chemical extinguishing agents of different... assure that the dry chemical supply is free of moisture which may cause the supply to cake or form...

  13. Molecular-beam sampling study of extinguishment of methane-air flames by dry chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Knuth, E.L.; Ni, W.F.; Seeger, C.

    1982-01-01

    The use of Al/sub 2/O/sub 3/, NaHCO/sub 3/, KHCO/sub 3/, NH/sub 4/H/sub 2/PO/sub 4/ and KCl powders for the inhibition of a methane/oxygen diffusion flame is studied through measurement of composition and temperature profiles, using a molecular beam mass spectrometer sampling system. In order to obtain significant inhibition without extinguishing the flame, a powder feeding rate of 2 mg/liter of gas was used for KCl and Al/sub 2/O/sub 3/, and of 3 mg/liter of gas for the remaining powders. CH/sub 4/, O/sub 2/, H/sub 2/O and CO/sub 2/ concentrations were measured by the mass spectrometer, while temperature was measured by the time-of-flight technique. For the powder feeding rates used, Al/sub 2/O/sub 3/ was the least and KCl and NH/sub 2/H/sub 4/PO/sub 2/ the most effective in reducing temperature. In reaction-inhibition effectiveness, Al/sub 2/O/sub 3/ was again lowest while KCl was superior to all others. Because the KCl concentration was only 2/3 that of NH/sub 4/H/sub 2/PO/sub 4/, it is recommended as the most effective temperature reducer and reaction inhibitor.

  14. Fire Source Accessibility of Water Mist Fire Suppression Improvement through Flow Method Control

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Jun Ho; Kim, Hyeong Taek; Kim, Yun Jung; Park, Mun Hee [KHNP CRI, Daejeon (Korea, Republic of)

    2013-10-15

    Recently, nuclear power plants set CO{sub 2} fire suppression system. However it is hard to establish and to maintain and it also has difficulties performing function test. Therefore, it needs to develop a new fire suppression system to replace the existing CO{sub 2} fire suppression systems in nuclear power plant. In fact, already, there exist alternatives - gas fire suppression system or clean fire extinguishing agent, but it is hard to apply because it requires a highly complicated plan. However, water mist fire suppression system which has both water system and gas system uses small amount of water and droplet, so it is excellent at oxygen displacement and more suitable for nuclear power plant because it can avoid second damage caused by fire fighting water. This paper explains about enclosure effect of water mist fire suppression. And it suggests a study direction about water mist fire source approach improvement and enclosure effect improvement, using flow method control of ventilation system. Water mist fire suppression can be influenced by various variable. And flow and direction of ventilation system are important variable. Expectations of the plan for more fire source ventilation system is as in the following. It enhances enclosure effects of water mists, so it improves extinguish performance. Also the same effect as a inert gas injection causes can be achieved. Lastly, it is considered that combustible accessibility of water mists will increase because of descending air currents.

  15. Reinstatement of extinguished fear by an unextinguished conditional stimulus

    Directory of Open Access Journals (Sweden)

    Lindsay R Halladay

    2012-05-01

    Full Text Available Anxiety disorders are often treated using extinction-based exposure therapy, but relapse is common and can occur as a result of reinstatement, whereby an aversive trigger can reinstate extinguished fear. Animal models of reinstatement commonly utilize a Pavlovian fear conditioning procedure, in which subjects are first trained to fear a conditional stimulus (CS by pairing it with an aversive unconditional stimulus (US, and then extinguished by repeated presentations of the CS alone. Reinstatement is typically induced by exposing subjects to an aversive US after extinction, but here we show that exposure to a non-extinguished CS can reinstate conditional fear responding to an extinguished CS, a phenomenon we refer to as conditional reinstatement. Rats were trained to fear two CSs (light and tone and subsequently underwent extinction training to only one CS (counterbalanced. Presenting the unextinguished CS (but not a novel cue immediately after extinction reinstated conditional fear responding to the extinguished CS in a test session given 24h later. These findings indicate that reinstatement of extinguished fear can be triggered by exposure to conditional as well as unconditional aversive stimuli, and this may help to explain why relapse is common following clinical extinction therapy in humans. Further study of conditional reinstatement using animal models may prove useful for developing refined extinction therapies that are more resistant to reinstatement.

  16. Size ratio induced yttrium aluminum garnet formation characteristics in nano-scaled Y{sub 2}O{sub 3}-Al{sub 2}O{sub 3} powder systems via fast firing processes

    Energy Technology Data Exchange (ETDEWEB)

    Hung, Chen-Tsung; Lai, Chai-Yuan [Department of Resources Engineering, National Cheng Kung University, No. 1 University Road, Tainan 70101, Taiwan (China); Yen, Fu-Su, E-mail: yfs42041@mail.ncku.edu.tw [Department of Resources Engineering, National Cheng Kung University, No. 1 University Road, Tainan 70101, Taiwan (China)

    2011-09-15

    Highlights: {yields} This study examined YAG synthesis using Y{sub 2}O{sub 3} and Al{sub 2}O{sub 3} as the starting materials. {yields} Appropriate size ratios of oxides and fast firing treatments favored YAG synthesis. {yields} Interface- and diffusion-controlled mechanism can be occurred during YAG formation. {yields} Finer Y{sub 2}O{sub 3} particles can react to pure YAG rapidly by interface-controlled mechanism. {yields} In coarser Y{sub 2}O{sub 3} particles, pure YAG attained by two reaction mechanisms in turn. - Abstract: The formation characteristics of YAG phase synthesized by fast-firing Y{sub 2}O{sub 3} and Al{sub 2}O{sub 3} powder mixtures were examined. Y{sub 2}O{sub 3} powders of 100, 350, and 500 nm in D{sub 50} were mixed with {alpha}-Al{sub 2}O{sub 3} powder of (D{sub 50}) 200 nm to obtain starting powders denoted as S0.5, S1.75, and S2.5, respectively. In these mixtures, the two oxides contacted wholly with each other but varied in number of contact points and diffusion length. This study aimed to eliminate the YAM and YAP phases, which normally occur during YAG formation. Examinations were conducted using pressed compacts (bulk density of 0.91 g cm{sup -3}) prepared with the three mixtures. After pre-heating at 700 deg. C for 30 s, the compacts were plunged at temperatures of 1050-1450 deg. C for 5-60 s and then quenched to room temperature. In the S0.5 system, one-step YAG formation occurred by an interface-controlled mechanism, and intermediates were apparently suppressed. However, YAG formation was divided into two stages in the S1.75 and S2.5 systems. Two stages were defined by the heating duration prior to and after 20 s. The interface-controlled mechanism was dominant in the initial stage, and then the diffusion-controlled mechanism was dominant in the second stage, in which YAG formed sluggishly and substantial amounts of YAM and YAP persisted. However, both stages followed the conversion sequence of YAM to YAP and then to YAG. Accordingly

  17. Fire training in a virtual-reality environment

    Science.gov (United States)

    Freund, Eckhard; Rossmann, Jurgen; Bucken, Arno

    2005-03-01

    Although fire is very common in our daily environment - as a source of energy at home or as a tool in industry - most people cannot estimate the danger of a conflagration. Therefore it is important to train people in combating fire. Beneath training with propane simulators or real fires and real extinguishers, fire training can be performed in virtual reality, which means a pollution-free and fast way of training. In this paper we describe how to enhance a virtual-reality environment with a real-time fire simulation and visualisation in order to establish a realistic emergency-training system. The presented approach supports extinguishing of the virtual fire including recordable performance data as needed in teletraining environments. We will show how to get realistic impressions of fire using advanced particle-simulation and how to use the advantages of particles to trigger states in a modified cellular automata used for the simulation of fire-behaviour. Using particle systems that interact with cellular automata it is possible to simulate a developing, spreading fire and its reaction on different extinguishing agents like water, CO2 or oxygen. The methods proposed in this paper have been implemented and successfully tested on Cosimir, a commercial robot-and VR-simulation-system.

  18. Advanced powder processing

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    Gelcasting is an advanced powder forming process. It is most commonly used to form ceramic or metal powders into complex, near-net shapes. Turbine rotors, gears, nozzles, and crucibles have been successfully gelcast in silicon nitride, alumina, nickel-based superalloy, and several steels. Gelcasting can also be used to make blanks that can be green machined to near-net shape and then high fired. Green machining has been successfully applied to both ceramic and metal gelcast blanks. Recently, the authors have used gelcasting to make tooling for metal casting applications. Most of the work has centered on H13 tool steel. They have demonstrated an ability to gelcast and sinter H13 to near net shape for metal casting tooling. Also, blanks of H13 have been cast, green machined into complex shape, and fired. Issues associated with forming, binder burnout, and sintering are addressed.

  19. Alternative approach for fire suppression of class A, B and C fires in gloveboxes

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberger, Mark S [Los Alamos National Laboratory; Tsiagkouris, James A [Los Alamos National Laboratory

    2011-02-10

    Department of Energy (DOE) Orders and National Fire Protection Association (NFPA) Codes and Standards require fire suppression in gloveboxes. Several potential solutions have been and are currently being considered at Los Alamos National Laboratory (LANL). The objective is to provide reliable, minimally invasive, and seismically robust fire suppression capable of extinguishing Class A, B, and C fires; achieve compliance with DOE and NFPA requirements; and provide value-added improvements to fire safety in gloveboxes. This report provides a brief summary of current approaches and also documents the successful fire tests conducted to prove that one approach, specifically Fire Foe{trademark} tubes, is capable of achieving the requirement to provide reliable fire protection in gloveboxes in a cost-effective manner.

  20. Coal fires in Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Whitehouse, Alfred E.; Mulyana, Asep A.S. [Office of Surface Mining/Ministry of Energy and Mineral Resources Coal Fire Project, Ministry of Energy and Mineral Resources, Agency for Training and Education, Jl. Gatot Subroto, Kav. 49, Jakarta 12950 (Indonesia)

    2004-07-12

    Indonesia's fire and haze problem is increasingly being ascribed to large-scale forest conversion and land clearing activities making way for pulpwood, rubber and oil palm plantations. Fire is the cheapest tool available to small holders and plantation owners to reduce vegetation cover and prepare and fertilize extremely poor soils. Fires that escaped from agricultural burns have ravaged East Kalimantan forests on the island of Borneo during extreme drought periods in 1982-1983, 1987, 1991, 1994 and 1997-1998. Estimates based on satellite data and ground observations are that more than five million hectares were burned in East Kalimantan during the 1997/1998 dry season. Not only were the economic losses and ecological damage from these surface fires enormous, they ignited coal seams exposed at the ground surface along their outcrops.Coal fires now threaten Indonesia's shrinking ecological resources in Kutai National Park and Sungai Wain Nature Reserve. Sungai Wain has one of the last areas of unburned primary rainforest in the Balikpapan-Samarinda area with an extremely rich biodiversity. Although fires in 1997/1998 damaged nearly 50% of this Reserve and ignited 76 coal fires, it remains the most valuable water catchment area in the region and it has been used as a reintroduction site for the endangered orangutan. The Office of Surface Mining provided Indonesia with the capability to take quick action on coal fires that presented threats to public health and safety, infrastructure or the environment. The US Department of State's Southeast Asia Environmental Protection Initiative through the US Agency for International Development funded the project. Technical assistance and training transferred skills in coal fire management through the Ministry of Energy and Mineral Resource's Training Agency to the regional offices; giving the regions the long-term capability to manage coal fires. Funding was also included to extinguish coal fires as

  1. “Use of fire extinguishers”—a new course with a new simulator

    CERN Multimedia

    HSE Unit & GS/FB

    2012-01-01

    Don’t wait, sign up! A new training course, “Handling of fire extinguishers”, is available since the beginning of March 2012. The training course is given by members of CERN’s Fire Brigade (GS-FB) and is intended for all members of personnel of CERN. Upon successful completion of the training course, you will be able to do the following: recognise a potentially combustible item and the various fire classes; choose the appropriate extinguisher for a given fire class; handle a fire extinguisher properly and efficiently; apply CERN's safety instructions. An important part of the training are the different firefighting exercises conducted using a new simulator, which makes it possible to simulate real conditions such as the following: a fire in the office; a fire in an electrical cabinet; a fire involving chemicals.        Don’t wait:  sign up for the training course directly ...

  2. Silica Foams for Fire Prevention and Firefighting.

    Science.gov (United States)

    Vinogradov, Alexander V; Kuprin, D S; Abduragimov, I M; Kuprin, G N; Serebriyakov, Evgeniy; Vinogradov, Vladimir V

    2016-01-13

    We report the new development of fire-extinguishing agents employing the latest technology of fighting and preventing fires. The in situ technology of fighting fires and explosions involves using large-scale ultrafast-gelated foams, which possess new properties and unique characteristics, in particular, exceptional thermal stability, mechanical durability, and full biocompatibility. We provide a detailed description of the physicochemical processes of silica foam formation at the molecular level and functional comparison with current fire-extinguishing and fire-fighting agents. The new method allows to produce controllable gelation silica hybrid foams in the range from 2 to 30 s up to 100 Pa·s viscosity. Chemical structure and hierarchical morphology obtained by scanning electron microscopy and transmission electron microscopy images develop thermal insulation capabilities of the foams, reaching a specific heat value of more than 2.5 kJ/(kg·°C). The produced foam consists of organized silica nanoparticles as determined by X-ray photoelectron spectroscopy and X-ray diffraction analysis with a narrow particle size distribution of ∼10-20 nm. As a result of fire-extinguishing tests, it is shown that the extinguishing efficiency exhibited by silica-based sol-gel foams is almost 50 times higher than that for ordinary water and 15 times better than that for state-of-the-art firefighting agent aqueous film forming foam. The biodegradation index determined by the time of the induction period was only 3 d, while even for conventional foaming agents this index is several times higher.

  3. Experimental study on the interaction of fine water mist with solid pool fires

    Institute of Scientific and Technical Information of China (English)

    LIU; Jianghong; (刘江虹); LIAO; Guangxuan; (廖光煊); LI; Peide; (厉培德); QIN; Jun; (秦俊); LU; Xiyun; (陆夕云)

    2003-01-01

    This paper describes experimental study of the interaction of fine water mists with solid pool fires. Fine water mist was generated by a single pressure nozzle and solid pool fires were produced from solid red pine or polymethyl methacrylate(PMMA). The LDV/APV system was employed to determine the water mist characteristics. The water mist droplet sizes and velocities from the nozzle were measured under varying conditions and at different locations. The effects of solid type, water flow rate, and nozzle distance from the sample surface on extinguishments time were examined. At a given water flow rate, the extinguishment time is much longer for PMMA fires than for solid pine fires. The extinguishment time was found to decrease with increasing water flow rate. At very low water flow, the extinguishment time decreases when the nozzle is positioned further from the sample surface. On the contrary, at high water flow, the extinguishment time appears to be independent of the distance between the nozzle and the sample surface. The experimental results show that flame extinguishments is due primarily to fuel surface cooling and wetting.

  4. THE EFFECT OF FIRE FIGHTING FOAMS ON THE ENVIRONMENT AND FIRE EXTINGUISHING

    OpenAIRE

    Tureková, Ivana; Karol BALOG; Półka, Marzena

    2012-01-01

    Огнетушители, как правило, применяются в операциях пожаротушения легковоспламеняющихся жидкостей, в которых используются их изоляционные свойства, герметизация и подавление процесса горения. Целью этой статьи является проведение рассуждений и сравнительный анализ наиболее часто используемых противопожарных пен в словацких противопожарных департаментах, учитывая не только их высокую эффективность пожаротушения (способность подавать их во время тушения пожаров на большой площади при низком уров...

  5. Influence of dispersion degree of water drops on efficiency of extinguishing of flammable liquids

    Directory of Open Access Journals (Sweden)

    Korolchenko Dmitriy

    2016-01-01

    Full Text Available Depending on the size of water drops, process of fire extinguishing is focused either in a zone of combustion or on a burning liquid surface. This article considers two alternate solutions of a heat balance equation. The first solution allows us to trace decrease of temperature of a flammable liquid (FL surface to a temperature lower than fuel flash point at which combustion is stopped. And the second solution allows us to analyze decrease of burnout rate to a negligible value at which steam-air mixture becomes nonflammable. As a result of solve of a heat balance equation it was made the following conclusion: water drops which size is equal to 100 μm will completely evaporate in a zone of combustion with extent of 1 m if the flying speed of drops is even 16 mps (acc. to Stokes v = 3 mps; whereas drops of larger size will evaporate only partially.

  6. Combined heat and power production based on gas turbine operation with biomass by gasification or powder firing; Kraftvaermeproduktion baserad paa gasturbindrift med biobraensle genom foergasning alternativt pulvereldning

    Energy Technology Data Exchange (ETDEWEB)

    Marbe, Aasa; Colmsjoe, Linda

    2006-12-15

    Combined heat and power (CHP) technique is relatively less extended in the Swedish energy system. There is a production of 56,2 TWh in district heating meanwhile only 7,6 TWh electricity comes from CHP. This only corresponds to 6 % of all electricity produced in Sweden (132 TWh). Based on the existing district heating system the amount of electricity produced in CHP-plants could rise from today 7,6 to 20 TWh. The Swedish government has decided to reduce the amount of CO{sub 2} released to atmosphere with 4 % by the year 2012. Furthermore there is a government decision that the nuclear power in a long time perspective will be phased out, so the amount of biofuelled heat and power plants has a huge potential to increase. To be competitive, the technique is to be efficient; hence the amount electricity produced should be as high as possible. Gasification of biofuel where the gas is used in a combined-cycle provides a higher efficiency compared to the traditional steam-cycle technique. To increase the electrical efficiency, an alternative method such as integration of a gas turbine with combustion of powder shape bio fuel in an external combustion chamber could be used. The concept is known as PFBC- technique in which the coal powder is combusted in a pressurised fluidised bed, the warm flue gases are cleaned up and expanded in a gas turbine. The objectives of this project have been to investigate the technical and economical conditions for gasification of bio fuel and for powder combustion in gas turbine for production of heat and power in different districts heat systems. Respectively technique has been studied in two different cases, Boraas Energi AB and ENA Energi AB. In Boraas the existing CHP-plant has been replaced by a bio fuelled gasification plant (IGCC) meanwhile at ENA Energi the existing CHP-plant has been complemented white a powder fuelled (bio) gas turbine. The task group for this report are decision makers of Energy Companies and the report will help

  7. Fire safety practices in the Shuttle and the Space Station Freedom

    Science.gov (United States)

    Friedman, Robert

    1993-02-01

    The Shuttle reinforces its policy of fire-preventive measures with onboard smoke detectors and Halon 1301 fire extinguishers. The forthcoming Space Station Freedom will have expanded fire protection with photoelectric smoke detectors, radiation flame detectors, and both fixed and portable carbon dioxide fire extinguishers. Many design and operational issues remain to be resolved for Freedom. In particular, the fire-suppression designs must consider the problems of gas leakage in toxic concentrations, alternative systems for single-failure redundancy, and commonality with the corresponding systems of the Freedom international partners. While physical and engineering requirements remain the primary driving forces for spacecraft fire-safety technology, there are, nevertheless, needs and opportunities for the application of microgravity combustion knowledge to improve and optimize the fire-protective systems.

  8. 20 CFR 654.417 - Fire, safety, and first aid.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Fire, safety, and first aid. 654.417 Section..., safety, and first aid. (a) All buildings in which people sleep or eat shall be constructed and maintained...-type water extinguisher. (g) First aid facilities shall be provided and readily accessible for use...

  9. ZrP nanoplates based fire-fighting foams stabilizer

    Science.gov (United States)

    Zhang, Lecheng; Cheng, Zhengdong; Li, Hai

    2015-03-01

    Firefighting foam, as a significant innovation in fire protection, greatly facilitates extinguishments for liquid pool fire. Recently, with developments in LNG industry, high-expansion firefighting foams are also used for extinguishing LNG fire or mitigating LNG leakage. Foam stabilizer, an ingredient in fire-fighting foam, stabilizes foam bubbles and maintains desired foam volume. Conventional foam stabilizers are organic molecules. In this work, we developed a inorganic based ZrP (Zr(HPO4)2 .H2O, Zirconium phosphate) plates functionalized as firefighting foam stabilizer, improving firefighting foam performance under harsh conditions. Several tests were conducted to illustrate performance. The mechanism for the foam stabilization is also proposed. Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX 77843, USA. Mary Kay O'Connor Process Safety Center, Texas A&M University, College Station, TX, 77843-3122

  10. The research on the thermal destruction of environment and controlling techniques of the No.4 outcrops fire in Haibaoqing

    Institute of Scientific and Technical Information of China (English)

    ZHAI Xiao-wei; DENG Jun; WEN Hu; DAI Ai-ping; WU Jian-bin

    2011-01-01

    The coal fire is one of very serious disasters in natural,not only amount of coal resources was burned and some ecological environment problems such as ground subsidence,acid rain,pollution and vegetation died were caused serious.The No.4 coal seam outcrops fire in Haibaoqing was take as research object,based on the existing theory of mechanism and characteristics of coal outcrop fires,a new fire-fighting composite gel is applicated which fits in with extinguishment of outcrop coal fires well.The technology has many advantages in extinguishing coal fires including isolating the coal from oxygen and lowering the temperature of the high-temperature coal and rock.The structure and chemical composition as well as fires-fighting properties of the composite gel is analyzed profoundly,as a result,reduce and stop the environment destruction caused by the coal fire.

  11. 29 CFR 1910.160 - Fixed extinguishing systems, general.

    Science.gov (United States)

    2010-07-01

    ... all fixed extinguishing systems installed to meet a particular OSHA standard except for automatic sprinkler systems which are covered by § 1910.159. (2) This section also applies to fixed systems not... discharge area prior to system discharge. (4) The employer shall provide automatic actuation of...

  12. Contextual Control of Extinguished Conditioned Performance in Humans

    Science.gov (United States)

    Havermans, Remco C.; Keuker, Jantien; Lataster, Timeke; Jansen, Anita

    2005-01-01

    Animal research has shown that extinguished conditioned performance is modulated by the environmental context in which extinction treatment has occurred. When the conditioned stimulus is presented outside the extinction context, conditioned responding is renewed. In two experiments, whether a renewal effect can also be found in humans was…

  13. Liquid metals fire control engineering handbook

    Energy Technology Data Exchange (ETDEWEB)

    Ballif, J.L. (comp.)

    1979-02-01

    This handbook reviews the basic requirements of the use of liquid metals with emphasis on sodium which has the greatest current usage. It delineates the concepts necessary to design facilities both radioactive and nonradioactive for use with liquid metals. It further reviews the state-of-the-art in fire extinguishers and leak detection equipment and comments on their application and sensitivity. It also provides details on some engineering features of value to the designer of liquid metal facilities.

  14. Practice of Fighting Fire and Suppressing Explosion for a Super-Large and Highly Gassy Mine

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Baijigou Mine fire in Ningxia Province, which broke out on October 24, 2003, affected more than 108 m3 of the mine and was probably the largest underground fire in China in recent years.In addition to its size, the fire was also characterized by excessive air leakage and the potential for violent methane explosions.A series of new measures were taken to fight the fire, including sealing intake tunnels with water, injecting three-phase foam through boreholes, and flushing with a large volume of nitrogen.The fire was successfully extinguished and production resumed soon afterwards; not one single methane explosion occurred during fire-fighting and afterwards.

  15. Repository Subsurface Preliminary Fire Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Richard C. Logan

    2001-07-30

    This fire hazard analysis identifies preliminary design and operations features, fire, and explosion hazards, and provides a reasonable basis to establish the design requirements of fire protection systems during development and emplacement phases of the subsurface repository. This document follows the Technical Work Plan (TWP) (CRWMS M&O 2001c) which was prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities''; Attachment 4 of AP-ESH-008, ''Hazards Analysis System''; and AP-3.11Q, ''Technical Reports''. The objective of this report is to establish the requirements that provide for facility nuclear safety and a proper level of personnel safety and property protection from the effects of fire and the adverse effects of fire-extinguishing agents.

  16. 武汉东湖通道工程水下隧道消防设计%The Design of Wuhan East Lake Tunnel Fire Protection System

    Institute of Scientific and Technical Information of China (English)

    王松林

    2015-01-01

    According to the engineering characteristics of Wuhan East Lake tunnel, a multi-fire protection system is employed. Fire hydrant system and foam-water spray system are used in the buried and semi-open sections of the tunnel roadway while only fire hydrant system is designed in the opening section of the main tunnel and ramp. Pipeless ultra-fine powder fire extinguishers are equipped in the tunnel equipment room and fire extinguishers are in place along the whole tunnel. This paper focuses on the composition, arrangement, design parameters and selection of the foam-water spray system. To achieve a uniform distribution of water sprinklers, different nozzles are selected and installed in different intervals on either two sides or one side according to the width of the tunnel roadway. One or two pumps are activated accordingly during fire fighting. In additional, the composition of fire alarming system, the types of alarming facilities and the system functions are concisely explained.%针对武汉东湖隧道工程特点,采用多种消防系统共同承担东湖隧道消防体系,其中隧道车行道的暗埋段和半敞口段采用消火栓系统及泡沫水喷雾系统,主线隧道及匝道的敞开段采用消火栓系统,隧道设备间采用无管网超细干粉灭火,同时在隧道内配设灭火器。重点阐述消火栓系统及泡沫水喷雾系统的组成及布置、设计参数选取、设备选型。为达到喷头均匀布水的要求,根据隧道车行道宽度不同,选择不同喷头按不同间距采用双侧或单侧布置,灭火时启动1台或2台消防泵。另外对隧道火灾报警系统的组成、火灾报警设施类型、系统功能等进行简要说明。

  17. WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J. D. Bigbee

    2000-06-21

    The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

  18. Modelling for Forest Fire Evolution Based on the Energy Accumulation and Release

    Directory of Open Access Journals (Sweden)

    Fan Yang

    2015-09-01

    Full Text Available Forest fire evolution plays an important role in the decision-making of controlling the forest fire. This paper aims to simulate the dynamics of the forest fire spread using a cellular automaton approach. Having analyzed the characteristics and evolution of forest fires, a simulation model for the forest fire evolution based on the energy accumulation and release is proposed. And, taking Australia's catastrophic forest fire in 2009 as an example, the fire’s evolution closely to the reality is simulated. The results of the experiments are shown that if forest energy is released in a small scale before or during the fire, the fire would be better controlled even if it does not occur. Improving the efficiency of the fire extinguishing procedures and reducing the speed of the fire spread are also effective for controlling the forest fire.

  19. PE基木塑复合材料的阻燃研究%Study on the Fire-Retardant Properties of PE/Wood Powder Composites

    Institute of Scientific and Technical Information of China (English)

    张会平; 何慧; 赵小科; 贾德民

    2012-01-01

    Fire retardant ammonium polyphosphate (APP) and FR synergist zinc borate(ZB) and kieselguhr were applied to prepare flame retarding wood-plastic composites. The burning behavior was studied through horizontal-vertical burning and limiting oxygen index (LOI). Thermogravimetric analysis (TGA) was employed to measure the thermal stability and the mechanical properties of the composites were tested statically. The results showed that APP enhanced the thermal stability of the composites significantly. When the APP content was 20 phr, the UL94 was V-0 rating, while the mechanical properties didn't change obviously. The synergistic effect of ZB and kieselguhr was not sharp, which indicated that the flame retardancy laws of them in wood-plastic composites were different from that in plastic. The SEM analysis demonstrated that the carbon layer of specimen of 2 phr kieselguhr was continuously denser and insulated heat and oxgen effectively.%采用无卤阻燃剂聚磷酸铵(APP)以及阻燃协效剂硼酸锌(zB)、硅藻土,制备具有良好阻燃性能的木塑复合材料。结果表明:APP在改善木塑复合材料阻燃性能的同时,可提高材料的热稳定性,当其用量为20份时,复合材料垂直燃烧达到UL94V-0级,此时,体系的力学性能变化不大;ZB、硅藻土对木塑复合材料的协效阻燃规律不同于对塑料的阻燃规律,添加2份硅藻土的阻燃体系形成的炭层最致密,可有效地隔热隔氧。

  20. Ways of solution of an underground fire-fighting problem

    Energy Technology Data Exchange (ETDEWEB)

    Bulgakov, Y.F.; Gryadustchiy, B.A. [RESPIRATOR, Research-and-Manufacturing Association on Mine Rescue Work, Donetsk (Ukraine)

    2001-07-01

    The risk of fire in belt conveyors in underground coal mines is high. To fight fires on drives of conveyors, an automatic powder and foam system has been developed in the Ukraine. The powder is intended for fighting the flame phase of the fire, and foam is used for cooling the driving drums. The paper explains how to calculate the required foam quantity and describes experiments to determine the installation parameters of this fire fighting systems. 1 ref.

  1. Catastrophe analysis of the water mist fire suppression process%细水雾灭火的突变分析

    Institute of Scientific and Technical Information of China (English)

    杨立军; 佟明羲; 赵建波

    2013-01-01

    To understand the water mist fire suppression mechanism and find out the extinguishment boundary, the water mist fire suppression process was analyzed with a non-linear catastrophe theory. The expressions of the flame energy potential function and the flame critical extinguishing temperature were deduced. The extinguishment criterion for the n-heptane pool fire was obtained. The extinguishment boundary is verified by conducting the water mist fire suppression experiments on n-heptane pool fire. The effect of oxygen concentration on the flame extinguishing temperature is quicker than that of heat absorption.%为了认识细水雾灭火机理,寻找细水雾作用下的火焰熄灭边界,采用非线性突变理论分析了细水雾灭火过程,推导出火焰能量势函数及火焰临界熄灭温度的表达式,得到了细水雾扑灭正庚烷油盘火的火焰熄灭边界.进行了细水雾针对正庚烷油盘火的灭火实验,实验结果验证了火焰熄灭边界的正确性.相比吸热过程,火焰熄灭温度受氧浓度的作用更为迅速.

  2. Fire History

    Data.gov (United States)

    California Department of Resources — The Fire Perimeters data consists of CDF fires 300 acres and greater in size and USFS fires 10 acres and greater throughout California from 1950 to 2002. Some fires...

  3. Fire Perimeters

    Data.gov (United States)

    California Department of Resources — The Fire Perimeters data consists of CDF fires 300 acres and greater in size and USFS fires 10 acres and greater throughout California from 1950 to 2003. Some fires...

  4. Discussion on Fire Safety Problems of Oil-immersed Transformers%油浸式变压器消防安全问题探讨

    Institute of Scientific and Technical Information of China (English)

    翟毅

    2015-01-01

    Fire features and fire reasons of oil-immersed transformers are analyzed, and the fire safety problems of oil-immersed transformers are studied from three main aspects, i. e. fire prevention technologies such as gas relays and pressure relief valves, fire detection technologies such as heat detectors and smoke detectors, and firefighting systems such as stationary water-spray fire extinguishing system, water-mist fire extinguishing system, oil-drainage & nitrogen-filling fire extinguishing system and SP synthetic foam-spray fire extinguishing.%分析油浸式变压器火灾特点及原因,从气体继电器、 压力释放阀等火灾预防技术, 感温探测器、 感烟探测器等火灾探测技术, 固定水喷雾灭火、 细水雾、 排油注氮和 "SP" 速灭合成型低泡喷淋等灭火系统三大方面对油浸式变压器的消防安全问题进行探讨.

  5. Solid State MEMS Thrusters Using Electrically Controlled Extinguishable Solid Propellant Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ET Materials, LLC developed the first ever electrically controlled extinguishable solid propellant (ECESP). The original propellant developed under Air Force SBIR...

  6. Aircraft Survivability: An Overview of Aircraft Fire Protection, Spring 2008

    Science.gov (United States)

    2008-01-01

    Extinguishing Evaluationby Patrick O’Connell, Scott Frederick, and Scott Wacker The C-130 Vulnerability Reduction Program ( VRP )/C-130J Live Fire Test (LFT...titled “Live Fire Test and Evaluation (LFT&E) of the C-130J” signed on 3 March 1998. C-130 VRP /C-130J LFT Program Phase I addressed C-130 wing dry bay...system (MANPADS) threat. C-130 VRP /C-130J LFT Program Phase IV was conducted to evaluate the effectiveness of the C-130J engine nacelle fire

  7. Innovative forest fire suppression technology device to solve the problem of forest fire prevention and the contribution of the world forest fire prevention%创新型森林防灭火技术对世界森林防灭火贡献的研究

    Institute of Scientific and Technical Information of China (English)

    江创葵; 季仙华

    2016-01-01

    China's water resources are very scarce, especially in the occurrence of forest fires, the water is very precious. At present, China's forest fire prevention, fire prevention methods are still the traditional relatively backward methods, once the forest fire, forest fire prevention, fire fighting efficiency is low, not only a waste of resources, destruction of the ecological environment, but also caused serious damage to property and personnel. This paper in reference on the basis of relevant experience at home and abroad, aiming at the problems of our country in the forest fire prevention and fire extinguishing, and domestic and foreign forest party fire extinguishing mechanism and methods, to explore the forest fire prevention and fire extinguishing system new method mechanism, and comprehensive utilization of water resources in our country, a model of forest fire prevention and fire extinguishing irrigation system, and detailed analysis of the forest fire prevention and extinguishing system with advanced, low consumption, environmental protection, resource conservation, efficient features, expounds the new forest protection, fire extinguishing system contribution to China's economic development and the development of the world economy, which has certain practical significance for promoting the development of China's socio-economic development and ecological civilization.%在借鉴国内外相关经验的基础上,针对我国在森林防、灭火方面存在的一些问题,以及国内外的森林方灭火机制与方法,探索森林防、灭火系统新的方法机制,综合利用我国水资源,研究出了一种新型森林防、灭火浇灌系统,详细分析了森林防灭火系统具有先进、低耗、环保、节约资源等高效特点,阐述了新型森林防、灭火系统对我国经济发展以及世界经济发展的贡献。

  8. Fire safety of LPG in marine transportation

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-08-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  9. Ecotoxicity of waste water from industrial fires fighting

    Science.gov (United States)

    Dobes, P.; Danihelka, P.; Janickova, S.; Marek, J.; Bernatikova, S.; Suchankova, J.; Baudisova, B.; Sikorova, L.; Soldan, P.

    2012-04-01

    As shown at several case studies, waste waters from extinguishing of industrial fires involving hazardous chemicals could be serious threat primary for surrounding environmental compartments (e.g. surface water, underground water, soil) and secondary for human beings, animals and plants. The negative impacts of the fire waters on the environment attracted public attention since the chemical accident in the Sandoz (Schweizerhalle) in November 1986 and this process continues. Last October, special Seminary on this topic has been organized by UNECE in Bonn. Mode of interaction of fire waters with the environment and potential transport mechanisms are still discussed. However, in many cases waste water polluted by extinguishing foam (always with high COD values), flammable or toxic dangerous substances as heavy metals, pesticides or POPs, are released to surface water or soil without proper decontamination, which can lead to environmental accident. For better understanding of this type of hazard and better coordination of firemen brigades and other responders, the ecotoxicity of such type of waste water should be evaluated in both laboratory tests and in water samples collected during real cases of industrial fires. Case studies, theoretical analysis of problem and toxicity tests on laboratory model samples (e.g. on bacteria, mustard seeds, daphnia and fishes) will provide additional necessary information. Preliminary analysis of waters from industrial fires (polymer material storage and galvanic plating facility) in the Czech Republic has already confirmed high toxicity. In first case the toxicity may be attributed to decomposition of burned material and extinguishing foams, in the latter case it can be related to cyanides in original electroplating baths. On the beginning of the year 2012, two years R&D project focused on reduction of extinguish waste water risk for the environment, was approved by Technology Agency of the Czech Republic.

  10. Effects of water mist addition on kerosene pool fire

    Institute of Scientific and Technical Information of China (English)

    ZHOU XiaoMeng; QIN Jun; LIAO GuangXuan

    2008-01-01

    The use of water mist to extinguish fire is a problem of particular interest since the banning of halo-gen-based agents for environmental reasons. This interest is reflected in the large number of re-searches performed on the main fire-extinguishing mechanisms of water mist: heat extraction, oxygen displacement and attenuation of heat fluxes. In contrast, there are still little known about the chemical and some other aspects of water mist addition on the pool fire. In this paper, a phenomenological study was conducted of the effect of water mist addition on the kerosene pool fire through the measurement of the heat release rate, CO, CO2 and O2 species concentration in combustion. The experimental results show that there is a significant enhancement effect at the beginning stage of water mist addition. Then, the flame size was decreased abruptly. By physical suppression effect combined with chemical effect, the experiments' results are explained especially. The study of effects of water mist on pool fire will be useful for optimizing designation of water mist fire-suppression system, improving the fire suppression efficiency and extending their application field.

  11. Determination of Realistic Fire Scenarios in Spacecraft

    Science.gov (United States)

    Dietrich, Daniel L.; Ruff, Gary A.; Urban, David

    2013-01-01

    This paper expands on previous work that examined how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or accumulation of other combustion products (e.g. carbon monoxide). The previous work introduced a simplified model that treated the fire primarily as a source of heat and combustion products and sink for oxygen prescribed (input to the model) based on terrestrial standards. The model further treated the spacecraft as a closed system with no capability to vent to the vacuum of space. The model in the present work extends this analysis to more realistically treat the pressure relief system(s) of the spacecraft, include more combustion products (e.g. HF) in the analysis and attempt to predict the fire spread and limiting fire size (based on knowledge of terrestrial fires and the known characteristics of microgravity fires) rather than prescribe them in the analysis. Including the characteristics of vehicle pressure relief systems has a dramatic mitigating effect by eliminating vehicle overpressure for all but very large fires and reducing average gas-phase temperatures.

  12. The interaction of fire and mankind: Introduction†

    Science.gov (United States)

    Chaloner, William G.

    2016-01-01

    Fire has been an important part of the Earth system for over 350 Myr. Humans evolved in this fiery world and are the only animals to have used and controlled fire. The interaction of mankind with fire is a complex one, with both positive and negative aspects. Humans have long used fire for heating, cooking, landscape management and agriculture, as well as for pyrotechnologies and in industrial processes over more recent centuries. Many landscapes need fire but population expansion into wildland areas creates a tension between different interest groups. Extinguishing wildfires may not always be the correct solution. A combination of factors, including the problem of invasive plants, landscape change, climate change, population growth, human health, economic, social and cultural attitudes that may be transnational make a re-evaluation of fire and mankind necessary. The Royal Society meeting on Fire and mankind was held to address these issues and the results of these deliberations are published in this volume. This article is part of the themed issue ‘The interaction of fire and mankind’. PMID:27216519

  13. 安全评价中作业场所灭火器配置评价的研究%Research on safety assessment of extinguisher distribution in workplace

    Institute of Scientific and Technical Information of China (English)

    董国强; 胡凌艳; 张双保; 张颖; 杨勇

    2011-01-01

    灭火器具有轻便灵活,易于掌握操作的特点,是扑救初起火灾的重要消防器材,对应急状态下的消防火火工作尤为重要.在建设项目安全预评价和验收评价中,往往受项目建设内容多,可行性研究报告或初步设计中对消防灭火器配置的设计详细程度有限等因素的影响,评价人员对建设项目作业场所灭火器配置情况是否符合相关规范、标准的要求,更多是通过检查该建设项目是否通过了当地公安消防部门的消防设计审核或消防验收来予以确认,往往很难具体确定作业场所灭火器材的配置包括规格、数量、设置位置是否满足该作业场所的要求.鉴于作业场所灭火器设置的重要性,就如何在建设项目安全评价中更好的对作业场所灭火器材的配备与设计进行评价,本文通过实例进行分析说明.旨在保证项目设计过程中对灭火器材配备的准确性,避免因灭火器配置规格、数量、位置的不当,造成火灾事故现场后果的严重化、扩大化,以减少火灾损失,保障人身和财产安全.%Fire extinguisher is a very important fire control device. It is flexible handing and can be easily operated by operation staffs who have been simply trained. So it is very important for fire fighting in emergency condition. In construction project safety assessment prior to start and construction project safety assessment upon completion,safety assessment staffs usually evaluate the extinguisher distribution situation whether meets the code and standard requirements according to check the construction project whether passes the fire control design examination or acceptance approval. It is usually difficult for them to concretely confirm whether extinguisher distribution including model、amount and setting position is meeting the workplace request. Because the design of extinguisher distribution is not detailed enough in feasibility study report and primary layout

  14. A rapid response database in support of post-fire hydrological modeling

    Science.gov (United States)

    Mary Ellen Miller; William J. Elliot

    2016-01-01

    Being prepared for an emergency is important. Every year wildfires threaten homes and lives, but danger persists even after the flames are extinguished. Post-fire flooding and erosion (Figure 1) can threaten lives, property, and natural resources. To respond to this threat, interdisciplinary Burned Area Emergency Response (BAER) teams assess potential erosion and flood...

  15. Feasibility of Systematic Recycling of Aircraft Halon Extinguishing Agents

    Science.gov (United States)

    1991-12-01

    BromoChlorodiFluoromethane, or commonly referred to as BCF as trade- marked by Imperial Chemical Industries Limited for their liquefied gas fire suppressant. Halon 1301...Bromotrifluoromethane. A liquified gas fire suppressant known for its low toxicity, high suppression efficiency, and wide temperature range of applica...liquefied gas fire fighting agent. C-1 Halon 1301 liquid phase density at 99.6 percent mole purity or higher (ZERO non-condensible dry gas content) in

  16. Fire debris analysis for forensic fire investigation using laser induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Choi, Soojin; Yoh, Jack J.

    2017-08-01

    The possibility verification of the first attempt to apply LIBS to arson investigation was performed. LIBS has capabilities for real time in-situ analysis and depth profiling. It can provide valuable information about the fire debris that are complementary to the classification of original sample components and combustion residues. In this study, fire debris was analyzed to determine the ignition source and existence of a fire accelerant using LIBS spectra and depth profiling analysis. Fire debris chemical composition and carbon layer thickness determines the possible ignition source while the carbon layer thickness of combusted samples represents the degree of sample carbonization. When a sample is combusted with fire accelerants, a thicker carbon layer is formed because the burning rate is increased. Therefore, depth profiling can confirm the existence of combustion accelerants, which is evidence of arson. Also investigation of fire debris by depth profiling is still possible when a fire is extinguished with water from fire hose. Such data analysis and in-situ detection of forensic signals via the LIBS may assist fire investigation at crime scenes.

  17. CERN fire fighters roll out in style

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    On Thursday, 20 October, CERN fire fighters celebrated the arrival of a new equipment transport truck.   Measuring 13m3 and weighing 2.5 tonnes, the truck can carry several types of response materials in the event of chemical or radiological accidents, pollution incidents or floods. It can also pull trailers carrying fire extinguishers and oxygen masks. "Despite its size, this vehicle is extremely practical and flexible, and it can be put to work quickly and easily,” says Patrick Berlinghi, logistics officer for the Fire Brigade. “It is equipped with a rear-view camera and lighting on the rear and the side. It can also be loaded and unloaded very quickly, as it takes only 15 seconds to lower the truck box and open the doors! "  

  18. Fire Safety Tests Comparing Synthetic Jet and Diesel Fuels with JP-8 (POSTPRINT)

    Science.gov (United States)

    2010-04-01

    extinguishment and burnback time for experimental test fires using AFFF on unleaded gasoline. The test fire standards outlined in the mil-spec are more...natural gas , followed by a Fischer–Tropsch process using a low-temperature cobalt catalyst to obtain 499% saturated (mainly n- or iso-paraffin) hydrocarbons...natural gas followed by a Fischer–Tropsch process, but different refining is used to obtain the desired fuel composition with an average molecular

  19. Evaluation of three percent Aqueous Film Forming Foam (AFFF) concentrates as fire fighting agents

    Science.gov (United States)

    Jablonski, E. J.

    1981-04-01

    A large-scale fire test program involving 20,000-square foot JP-4 fuel fires was conducted to evaluate the fire suppression effectiveness and compatibility of 3 percent Aqueous Film Forming Foam (AFFF) agents in Air Force fire fighting vehicles. Three commercially available 3 percent AFFF concentrates were tested in accordance with military specification MIL-F-24385B. Test results are summarized in Appendix A. As a result of these tests, an updated Revision C to this MIL SPEC has been accomplished with new requirements for both 3 percent and 6 percent AFFF extinguishing agents.

  20. Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)

    Energy Technology Data Exchange (ETDEWEB)

    SINGH, G.

    2000-10-17

    This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

  1. Behavior of one-way reinforced concrete slabs subjected to fire

    Directory of Open Access Journals (Sweden)

    Said M. Allam

    2013-12-01

    Full Text Available A finite difference analysis was performed to investigate the behavior of one-way reinforced concrete slabs exposed to fire. The objective of the study was to investigate the fire resistance and the fire risk after extinguishing the fire. Firstly, the fire resistance was obtained using the ISO834 standard fire without cooling phase. Secondly, the ISO834 parametric fire with cooling phase was applied to study the effect of cooling time. Accordingly, the critical time for cooling was identified and the corresponding failure time was calculated. Moreover, the maximum risk time which is the time between the fire extinguishing and the collapse of slab was obtained. Sixteen one-way reinforced concrete slabs were considered to study the effect of important parameters namely: the concrete cover thickness; the plaster; and the live load ratio. Equations for heat transfer through the slab thickness were used in the fire resistance calculations. Studying the cooling time revealed that the slabs are still prone to collapse although they were cooled before their fire resistance. Moreover, increasing the concrete cover thickness and the presence of plaster led to an increase in the maximum risk time. However, the variation in the live load ratio has almost no effect on such time.

  2. Coal Field Fire Fighting - Practiced methods, strategies and tactics

    Science.gov (United States)

    Wündrich, T.; Korten, A. A.; Barth, U. H.

    2009-04-01

    Subsurface coal fires destroy millions of tons of coal each year, have an immense impact to the ecological surrounding and threaten further coal reservoirs. Due to enormous dimensions a coal seam fire can develop, high operational expenses are needed. As part of the Sino-German coal fire research initiative "Innovative technologies for exploration, extinction and monitoring of coal fires in Northern China" the research team of University of Wuppertal (BUW) focuses on fire extinction strategies and tactics as well as aspects of environmental and health safety. Besides the choice and the correct application of different extinction techniques further factors are essential for the successful extinction. Appropriate tactics, well trained and protected personnel and the choice of the best fitting extinguishing agents are necessary for the successful extinction of a coal seam fire. The chosen strategy for an extinction campaign is generally determined by urgency and importance. It may depend on national objectives and concepts of coal conservation, on environmental protection (e.g. commitment to green house gases (GHG) reductions), national funding and resources for fire fighting (e.g. personnel, infrastructure, vehicles, water pipelines); and computer-aided models and simulations of coal fire development from self ignition to extinction. In order to devise an optimal fire fighting strategy, "aims of protection" have to be defined in a first step. These may be: - directly affected coal seams; - neighboring seams and coalfields; - GHG emissions into the atmosphere; - Returns on investments (costs of fire fighting compared to value of saved coal). In a further step, it is imperative to decide whether the budget shall define the results, or the results define the budget; i.e. whether there are fixed objectives for the mission that will dictate the overall budget, or whether the limited resources available shall set the scope within which the best possible results shall be

  3. Smouldering Subsurface Fires in the Earth System

    Science.gov (United States)

    Rein, Guillermo

    2010-05-01

    Smouldering fires, the slow, low-temperature, flameless form of combustion, are an important phenomena in the Earth system. These fires propagate slowly through organic layers of the forest ground and are responsible for 50% or more of the total biomass consumed during wildfires. Only after the 2002 study of the 1997 extreme haze event in South-East Asia, the scientific community recognised the environmental and economic threats posed by subsurface fires. This was caused by the spread of vast biomass fires in Indonesia, burning below the surface for months during the El Niño climate event. It has been calculated that these fires released between 0.81 and 2.57 Gton of carbon gases (13-40% of global emissions). Large smouldering fires are rare events at the local scale but occur regularly at a global scale. Once ignited, they are particularly difficult to extinguish despite extensive rains or fire-fighting attempts and can persist for long periods of time (months, years) spreading over very extensive areas of forest and deep into the soil. Indeed, these are the oldest continuously burning fires on Earth. Earth scientists are interested in smouldering fires because they destroy large amounts of biomass and cause greater damage to the soil ecosystem than flaming fires do. Moreover, these fires cannot be detected with current satellite remote sensing technologies causing inconsistencies between emission inventories and model predictions. Organic soils sustain smouldering fire (hummus, duff, peat and coal) which total carbon pool exceeds that of the world's forests or the atmosphere. This have important implications for climate change. Warmer temperatures at high latitudes are resulting in unprecedented permafrost thaw that is leaving large soil carbon pools exposed to fires. Because the CO2 flux from peat fires has been measured to be about 3000 times larger that the natural degradation flux, permafrost thaw is a risk for greater carbon release by fire and subsequently

  4. Fear of the unexpected: hippocampus mediates novelty-induced return of extinguished fear in rats.

    Science.gov (United States)

    Maren, Stephen

    2014-02-01

    Several lines of evidence indicate an important role for the hippocampus in the recovery of fear memory after extinction. For example, hippocampal inactivation prevents the renewal of fear to an extinguished conditioned stimulus (CS) when it is presented outside the extinction context. Renewal of extinguished responding is accompanied by associative novelty (an unexpected occurrence of a familiar CS in a familiar place), the detection of which may require the hippocampus. We therefore examined whether the hippocampus also mediates the recovery of extinguished fear caused by other unexpected events, including presenting a familiar CS in a novel context or presenting a novel cue with the CS in a familiar context (e.g., external disinhibition). Rats underwent Pavlovian fear conditioning and extinction using an auditory CS and freezing behavior served as the index of conditioned fear. In Experiment 1, conditioned freezing to the extinguished CS was renewed in a novel context and this was eliminated by intra-hippocampal infusions of the GABAA agonist, muscimol, prior to the test. In Experiment 2, muscimol inactivation of the hippocampus reduced the external disinhibition of conditioned freezing that occurred when a novel white noise accompanied the extinguished tone CS. Collectively, these results suggest that the hippocampus mediates the return of fear when extinguished CSs are unexpected, or when unexpected stimuli accompany CS presentation. Ultimately, a violation of expectations about when, where, and with what other stimuli an extinguished CS will occur may form the basis of spontaneous recovery, renewal, and external disinhibition.

  5. Modelling Technology for Building Fire Scene with Virtual Geographic Environment

    Science.gov (United States)

    Song, Y.; Zhao, L.; Wei, M.; Zhang, H.; Liu, W.

    2017-09-01

    Building fire is a risky activity that can lead to disaster and massive destruction. The management and disposal of building fire has always attracted much interest from researchers. Integrated Virtual Geographic Environment (VGE) is a good choice for building fire safety management and emergency decisions, in which a more real and rich fire process can be computed and obtained dynamically, and the results of fire simulations and analyses can be much more accurate as well. To modelling building fire scene with VGE, the application requirements and modelling objective of building fire scene were analysed in this paper. Then, the four core elements of modelling building fire scene (the building space environment, the fire event, the indoor Fire Extinguishing System (FES) and the indoor crowd) were implemented, and the relationship between the elements was discussed also. Finally, with the theory and framework of VGE, the technology of building fire scene system with VGE was designed within the data environment, the model environment, the expression environment, and the collaborative environment as well. The functions and key techniques in each environment are also analysed, which may provide a reference for further development and other research on VGE.

  6. Defeat the dragon: coal fires between self ignition and fire fighting

    Energy Technology Data Exchange (ETDEWEB)

    Manfred W. Wuttke; Stefan Wessling; Winfried Kessels

    2007-01-15

    Spontaneous coal fires in near surface coal seams are a worldwide recognized problem. They are destroying coal resources and emit climate relevant gases both in considerable amounts. While the extinction of such fires is a most desirable goal, the estimation of the actual input of greenhouse gases into the atmosphere is of great interest especially in the context of the Kyoto protocol as such values are needed as baseline for the Clean Development Mechanism (CDM) policies. Under the framework of the Sino-German coal-fire research project we are developing numerical models of such coal fires for the operational use in fire fighting campaigns. Based on our understanding of the governing physical and chemical processes that are relevant for the whole combustion process we simulate the coal fire spreading along the seams for typical situations. From these scenario calculations we deduce information needed to support the CDM baseline estimation and to assess the progress of fire extinguishing efforts like water injection and surface covering to dissipate the heat and suffocate the fire. We present case studies using the finite-element-code ROCKFLOW applied to realistic geometries based on field observations in the Shenhua Group Coal Mining Area Wuda (Inner Mongolia, PR China).

  7. Spectacular test of the fire extinguishing system in the underground cavern of the CMS experiment

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The enormous rumbling heard 100 m under the earth on Friday, 12 May, was not the start of a foam party at CMS. The Safety Team looked on from the second tier of the CMS underground cavern as it reechoed to the sound of water rushing through the two huge pipes overhead and the air was filled with a mixture of water and foam. A minute later it was a winter wonderland, as fluffy puffs of foam came shooting out of the twelve foam blowers lining the upper cavern walls on both sides. In less than two minutes 7 m3 of water mixed with a small percentage of foaming liquid, was transformed into 5600 m3 of foam and discharged into the cavern.

  8. 46 CFR 167.45-1 - Steam, carbon dioxide, and halon fire extinguishing systems.

    Science.gov (United States)

    2010-10-01

    ... accepted in lieu of the inert gas system for the protection of cargo holds, paint lockers, and similar... to each cargo-oil deep tank, lamp locker, oil room, and like compartments, which lamp locker, oil... lamp lockers, oil rooms, and like compartments may be taken from the nearest steam supply...

  9. 33 CFR 145.10 - Locations and number of fire extinguishers required.

    Science.gov (United States)

    2010-07-01

    ... boilers B-V 2 required. 1 Internal combustion or gas turbine engines B-II 1 for each engine. 2 Electric motors or generators of open type C-II 1 for each 2 motors or generators. 3 1 Not required where a fixed carbon dioxide system is installed. 2 When installation is on weather deck or open to atmosphere at...

  10. 46 CFR 167.45-45 - Carbon dioxide fire-extinguishing system requirements.

    Science.gov (United States)

    2010-10-01

    ... boiler, and the top of the casing or drum, whichever is the higher, on water-tube boilers. The quantity... the boiler room in feet. D=the distance in feet from tank top or flat forming lower boundary to top of... feet from tank top or flat forming lower boundary to the underside of deck forming the batch...

  11. 75 FR 7342 - Airworthiness Directives; SICLI Halon 1211 Portable Fire Extinguishers as Installed on Various...

    Science.gov (United States)

    2010-02-19

    ... Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact, positive or... Company. Dassault-Aviation. Empresa Brasileira de Aeronautica S.A. (EMBRAER). Eurocopter Canada...

  12. 78 FR 70324 - Thy Hydrostatic Testing Provision of the Portable Fire Extinguishers Standard; Extension of the...

    Science.gov (United States)

    2013-11-25

    .... Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor's... procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service... pages you may fax them to the OSHA Docket Office at (202) 693- 1648. Mail, hand delivery,......

  13. A Brief Discussion on Fire Prevention and Safety Management of Museums%谈博物馆的防火措施及安全管理

    Institute of Scientific and Technical Information of China (English)

    王永武

    2012-01-01

    Museums have become an important part of cultural facilities in a city, and the main purpose of the con- trol system of its fire design is not only for fire prevention but also for fire control. In addition to the indoor fire hy- drant system and automatic water - spouting fire extinguishing system, there are also special fire control measures such as water spray extinguishing system and gas fire extinguishing system. This paper analyzes the problems with museum fire risk, and promotes some measures for museum fire protection.%博物馆已成为城市文化设施的重要组成部分,其消防系统的设计不但要重在防,而且要重在灭。除应设有普通的消火栓系统和自动喷水灭火系统外,还应设有水喷雾灭火系统、气体灭火系统等特殊的消防措施。分析了博物馆的火灾危险性和我国博物馆消防安全管理方面存在的问题,针对性的提出了博物馆的消防安全管理对策。

  14. STS-47 crew during fire fighting exercises at JSC's Fire Training Pit

    Science.gov (United States)

    1992-01-01

    STS-47 Endeavour, Orbiter Vehicle (OV) 105, crewmembers line up along water hoses to extinguish a blaze in JSC's Fire Training Pit during fire fighting exercises. Manning the hose in the foreground are Payload Specialist Mamoru Mohri, holding the hose nozzle, backup Payload Specialist Takao Doi, Mission Specialist (MS) Jerome Apt, and Commander Robert L. Gibson, at rear. Lined up on the second hose are Pilot Curtis L. Brown, Jr, holding the hose nozzle, followed by MS N. Jan Davis, MS and Payload Commander (PLC) Mark C. Lee, and backup Payload Specialist Stan Koszelak. A veteran firefighter monitors the effort from a position between the two hoses. In the background, backup Payload Specialist Chiaki Naito-Mukai, donning gloves, and MS Mae C. Jemison look on. The Fire Training Pit is located across from the Gilruth Center Bldg 207. Mohri, Doi, and Mukai all represent Japan's National Space Development Agency (NASDA).

  15. Dynamics of plasma catecholamine and corticosterone concentrations during reinforced and extinguished operant behavior in rats

    NARCIS (Netherlands)

    de Boer, S.F.; de Beun, R; Slangen, J L; van der Gugten, J

    1990-01-01

    Plasma noradrenaline (NA), adrenaline (A) and corticosterone (CS) concentrations were determined simultaneously in permanently heart-cannulated rats before and during the performance of reinforced and nonreinforced (extinguished) operant behavior. Shortly before the experimental food-reinforced (VI

  16. Dynamics of plasma catecholamine and corticosterone concentrations during reinforced and extinguished operant behavior in rats

    NARCIS (Netherlands)

    de Boer, S.F.; de Beun, R; Slangen, J L; van der Gugten, J

    Plasma noradrenaline (NA), adrenaline (A) and corticosterone (CS) concentrations were determined simultaneously in permanently heart-cannulated rats before and during the performance of reinforced and nonreinforced (extinguished) operant behavior. Shortly before the experimental food-reinforced (VI

  17. Development and Evaluation of a Prototype Wheeled Ultra-High Pressure Extinguisher System with Novec 1230

    Science.gov (United States)

    2016-01-01

    extinguisher reservoir the propellant gas occupies a progressively larger volume, which causes the internal pressure to drop, thereby causing the...valves used in the prototype UHP extinguisher. In addition, the nozzle had relatively high recoil at pressures above 2000 psi, making it difficult for...utilize system pressures of 2100 and 1500 psi, respectively, due to the orifice diameter of these nozzles. As described above, this relatively high

  18. Sprinkler and water spray techniques in fires of combustible liquids. Sprinkleritekniikka nestepaloissa

    Energy Technology Data Exchange (ETDEWEB)

    Keski-Rahkonen, O.

    1986-08-15

    The purpose of this review is to find out what is known scientifically about extinguishment and control of fires in combustible liquids by sprinkler and water spray techniques. Because no review on combustion is available in Finnish, the first part of the study deals extensively with principles and the most important parameters of combustion of liquids in different geometries. The theory of flames based on diffusion equations is outlined both for laminar and turbulent flow. Then the application of these theories on pool fire and droplet burning are described. The theoretical extinction criteria were studied to find out the essential factors controlling the extinguishment process. The movement of water droplets in and interactions with flames is approached theoretically and experimentally. The latter part of the study presents the most important sprinkler test series since the fifties. It gives a simple theory on sprinkler actuation time and describes test series designed to find out practical answers to the required water flux density. Most of the tests deal with pool fire of combustible liquids. The extinguishment of a gas blow out fire and a number of tests using solid fuels are also included. The fires and the protection by water spray cooling of the storage tanks and pressure vessels are reviewed. Finally, the development of early-suppression, fast-response (ESFR) and intelligent sprinkler systems is described briefly.

  19. 3D Simulation Research on Extinguishing Based on Rapid Motion%基于运动状态的快速灭火三维仿真研究

    Institute of Scientific and Technical Information of China (English)

    程乃伟; 黄辉; 李想; 蒋波沱; 董宇佳

    2016-01-01

    Based on the parameters of water cannon in fire engines,and by combining with the relationship between car GPS system and the positioning of buildings,the paper puts forward a possibility for automatically detecting a specific location of source of fire while the fire truck is moving,and automatically extinguishing the fire with water cannons according to detection results. The paper uses Vega Prime as the simulation platform with compiler of VS2005. The targets of paper have been achieved.%本文以现有消防车消防水炮的参数为基础,结合车载GPS系统与建筑物的经纬度信息的关系,提出消防车在行驶过程中,对特定位置的火源进行自动化检测并根据检测结果使用消防水炮进行自动化灭火的可能性。并利用Vega Prime为模拟平台在vs2005中进行编程,获得了预期的效果。

  20. 滨河花园地下车库消防设计%The fire fighting design of underground garage in Binhe garden

    Institute of Scientific and Technical Information of China (English)

    卫瑞鸣

    2012-01-01

    Combining with relevant codes, the paper analyzed the fire design of underground garage in Binhe garden, discussed from five as- pects, including fire fighting system, automatic sprinkler fire extinguishing system, fire extinguisher and other settings, emphatically elaborated the specific design method of each system, provided reference for similar underground garage fire fighting design.%结合相关规范,对滨河花园地下车库消防设计进行了分析,从五个方面进行了论述,包括消防系统,自动喷水灭火系统,消火栓等的设置等内容,着重阐述了各系统具体的设计办法,为今后同类地下车库消防设计提供了借鉴。

  1. US Fire Administration Fire Statistics

    Data.gov (United States)

    Department of Homeland Security — The U.S. Fire Administration collects data from a variety of sources to provide information and analyses on the status and scope of the fire problem in the United...

  2. Scientists assess impact of Indonesia fires

    Science.gov (United States)

    Showstack, Randy

    The fires burning in Indonesia over the past several months are setting aflame the biomass and wildlife habitat of the tropical forests, spreading a dangerously unhealthy haze across the populous country and nearby nations in southeast Asia, causing transportation hazards, and sending plumes of smoke up into the troposphere.Most of the fires have been set—by big landowners, commercial loggers, and small farmers—in attempts to clear and cultivate the land, as people have done in the past. But this year a drought induced by El Niño limited the rainfall that could help extinguish the flames and wash away the smoke and haze. In addition, some scientists say that smoke could even delay the monsoon, which usually arrives in early November.

  3. Modeling and Analysis of Realistic Fire Scenarios in Spacecraft

    Science.gov (United States)

    Brooker, J. E.; Dietrich, D. L.; Gokoglu, S. A.; Urban, D. L.; Ruff, G. A.

    2015-01-01

    An accidental fire inside a spacecraft is an unlikely, but very real emergency situation that can easily have dire consequences. While much has been learned over the past 25+ years of dedicated research on flame behavior in microgravity, a quantitative understanding of the initiation, spread, detection and extinguishment of a realistic fire aboard a spacecraft is lacking. Virtually all combustion experiments in microgravity have been small-scale, by necessity (hardware limitations in ground-based facilities and safety concerns in space-based facilities). Large-scale, realistic fire experiments are unlikely for the foreseeable future (unlike in terrestrial situations). Therefore, NASA will have to rely on scale modeling, extrapolation of small-scale experiments and detailed numerical modeling to provide the data necessary for vehicle and safety system design. This paper presents the results of parallel efforts to better model the initiation, spread, detection and extinguishment of fires aboard spacecraft. The first is a detailed numerical model using the freely available Fire Dynamics Simulator (FDS). FDS is a CFD code that numerically solves a large eddy simulation form of the Navier-Stokes equations. FDS provides a detailed treatment of the smoke and energy transport from a fire. The simulations provide a wealth of information, but are computationally intensive and not suitable for parametric studies where the detailed treatment of the mass and energy transport are unnecessary. The second path extends a model previously documented at ICES meetings that attempted to predict maximum survivable fires aboard space-craft. This one-dimensional model implies the heat and mass transfer as well as toxic species production from a fire. These simplifications result in a code that is faster and more suitable for parametric studies (having already been used to help in the hatch design of the Multi-Purpose Crew Vehicle, MPCV).

  4. Prevention and control of coalfield fire technology: A case study in the Antaibao Open Pit Mine goaf burning area, China

    Institute of Scientific and Technical Information of China (English)

    Cao Kai; Zhong Xiaoxing; Wang Deming; Shi Guoqing; Wang Yanming; Shao Zhenlu

    2012-01-01

    It is very difficult to clearly detect the location of a burning area in a coal mine since it is hidden underground.So we conducted research on the distribution of the burning area before controlling it.Firstly,the original drilling technique was used to analyze and determine the loose and scope of caving of burning area through field test,and then obtained the gases and the temperature data in this area were according to the borehole data.By analyzing these data,we found out that the location of burning area concentrated in the loose and caving area; and finally,the location and development of the burning area within the tested area were accurately determined.Based on this theory,we used the ground penetrating radar (GPR) to find out the loose and caving scale in the burning area during the control process of the burning area,and then located the fire-extinguishing boreholes within target which we used to control burning fire in the section.A mobile comprehensive fire prevention and extinguishing system based on the three-phase foam fire prevention and control technique was then adopted and conducted in the burning area which took only 9 months to extinguish the 227,000 m2 of burning area of 9# coal.This control technology and experience will provide a very important reference to the control of other coalfield fire and hillock fire in the future.

  5. Design of Ranch Fire Monitoring System Based on Zig Bee Technology

    Institute of Scientific and Technical Information of China (English)

    Chao; ZHANG

    2015-01-01

    This paper designs a way to introduce Zig Bee technology into the ranch fire monitoring system,and builds a real-time ranch fire monitoring system based on Zig Bee wireless sensor network.The system can monitor the parameters related to ranch in real time,such as air moisture,temperature and smoke density,so as to provide information support for ranch fire prevention and extinguishment.This paper researches the circuit design of Zig Bee wireless sensor network node,node information collection,data fusion,transmission and effective topological structure of sensor network.

  6. 1-Tochtli, 2-Acatl Survivals of the New Fire Ceremony 1558/1559; 1610/1611

    Science.gov (United States)

    Lebeuf, Arnold

    2016-11-01

    In pre-Hispanic Mexico great ceremonies were celebrated every 52 years at the congruency of the two basic calendar cycles, of 365 and of 260 days. All ritual and domestic fires, were extinguished for five days. Then a new fire was lit on the chest of a victim. The evangelization of Mexico was accompanied by syncretism of the local faith, its feasts and places of cult. We find in the archives of the XVI and XVII centuries traces of the survivals of the New Fire Ceremony.

  7. Cigarette Fires Involving Upholstered Furniture in Residences: The Role that Smokers, Smoker Behavior, and Fire Standard Compliant Cigarettes Play.

    Science.gov (United States)

    Butry, David T; Thomas, Douglas S

    2017-05-01

    Residential structure fires pose a significant risk to life and property. A major source of these fires is the ignition of upholstered furniture by cigarettes. It has long been established that cigarettes and other lighted tobacco products could ignite upholstered furniture and were a leading cause of fire deaths in residences. In recent years, states have adopted fire standard compliant cigarettes ('FSC cigarettes') that are made with a wrapping paper that contains regularly spaced bands, which increases the likelihood of self-extinguishment. This paper measures the effectiveness of FSC cigarettes on the number of residential fires involving upholstered furniture, and the resulting fatalities, injuries, and extent of flame spread, while accounting for the under-reporting of fire incidents. In total, four models were estimated using fire department data from 2002 to 2011. The results provide evidence that FSC cigarettes, on average, reduced the number of residential fires by 45 %, reduced fatalities by 23 %, and extent of flame spread by 27 % in 2011. No effect on injuries was found. Within each state, effectiveness is moderated by the number of smokers and their consumption patterns. In general, FSC cigarettes are more effective in places with a large smoking population who engage in heavier smoking. There is a very limited effect on the lightest of smokers, suggesting behavioral differences between heavy and light smokers that influence fire risk.

  8. 46 CFR 28.820 - Fire pumps, fire mains, fire hydrants, and fire hoses.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Fire pumps, fire mains, fire hydrants, and fire hoses... REQUIREMENTS FOR COMMERCIAL FISHING INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.820 Fire pumps, fire mains, fire hydrants, and fire hoses. (a) Each vessel must be equipped with a self-priming, power driven fire...

  9. 氟碳表面活性剂环境风险控制措施初探%Environment risks control of fluorocarbon surfactants in foam extinguishing agents

    Institute of Scientific and Technical Information of China (English)

    朱江

    2012-01-01

    统计分析了山西省大中型石油化工企业数量以及2007-2011年全省油类火灾发生的时间、地点,由此估算出泡沫灭火剂储备量及含氟碳表面活性剂(主要是C8类氟碳表面活性剂)的用量.从中分析氟碳表面活性剂排入大气中、直接进入土壤、直接流入河流和通过下水道进入污水处理厂对环境造成的污染风险.介绍国际发达国家相关处理措施,提出我国消防领域解决控制氟碳表面活性剂的建议:一是大力开发和选用环境友好型泡沫灭火剂,把对环境的影响降至最低;二是积极应对,加强管理,妥善回收处理消防灭火剂使用后的残液;三是鼓励污水处理厂开发能降解氟碳表面活性剂的处理工艺,最终达到降低此类风险对人类的危害;四是提出研制新型泡沫灭火剂的思路.%In order to investigate the reserves of foam extinguishing agents and usage of fluorocarbon surfactants in fire fighting field of Shanxi Province, we made a statistics of the number of large and medium petrochemistry industries and the occurring time and sites of oil (ire during 2007 - 2011. And there existed environment risks for the fluorocarbon surfactants (especially C8). The control measures of fluorocarbon surfactants' pollution include utilize the green foam extinguishing agents without or with as few as C8 fluorocarbon surfactants such as perfluo-rooctane sulfonate (PFOS)and perfluorooctanoic acid (PFOA). collection of the used foam extinguishing agents, and development of the degradation techniques for them and new foam extinguishing agent.

  10. Fire safety of LPG in marine transportation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-06-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  11. Fire safety of LPG in marine transportation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-06-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  12. “Use of fire extinguishers” course: A hot tip for your safety!

    CERN Document Server

    The Safety Training Team

    2013-01-01

    The “Use of fire extinguishers – live exercises” course was introduced in conjunction with the Fire and Rescue Service and the HSE Unit at the start of 2012. Since then, more than 800 people have been trained in the use of fire extinguishers.   Photo: Vanessa Bandier. This course is aimed at all members of the CERN personnel. It takes place at the Prévessin training centre, lasts an hour and a half and consists of a theoretical part and a practical part with a role-play exercise in the simulator. The course can be taken in French or English. Here are some examples of comments received from people who have taken the course: “Excellent training session, very useful, especially the practical part. I’m no longer afraid to use a fire extinguisher.” “I was impressed with the quality of the installations used for the training. I didn’t expect every participant to be able to practise dealing with an emergency...

  13. Physical and Chemical Aspects of Fire Suppression in Extraterrestrial Environments

    Science.gov (United States)

    Takahashi, F.; Linteris, G. T.; Katta, V. R.

    2001-01-01

    A fire, whether in a spacecraft or in occupied spaces on extraterrestrial bases, can lead to mission termination or loss of life. While the fire-safety record of US space missions has been excellent, the advent of longer duration missions to Mars, the moon, or aboard the International Space Station (ISS) increases the likelihood of fire events, with more limited mission termination options. The fire safety program of NASA's manned space flight program is based largely upon the principles of controlling the flammability of on-board materials and greatly eliminating sources of ignition. As a result, very little research has been conducted on fire suppression in the microgravity or reduced-gravity environment. The objectives of this study are: to obtain fundamental knowledge of physical and chemical processes of fire suppression, using gravity and oxygen concentration as independent variables to simulate various extraterrestrial environments, including spacecraft and surface bases in Mars and moon missions; to provide rigorous testing of analytical models, which include comprehensive descriptions of combustion and suppression chemistry; and to provide basic research results useful for technological advances in fire safety, including the development of new fire-extinguishing agents and approaches, in the microgravity environment associated with ISS and in the partial-gravity Martian and lunar environments.

  14. Fires in rooms containing electrical components - incident planning, fire fighting tactics, risks; Braender i driftrum - Insatsplaner, slaeckteknik, risker

    Energy Technology Data Exchange (ETDEWEB)

    Magnusson, Tommy; Ottosson, Jan; Lindskog, BertiI; Soederquist Bende, Evy; Eriksson, Fredrik; Haffling, Stefan

    2006-12-15

    On July 1, 2005 a fire occurred within an electrical switch room at Forsmark Nuclear Power Plant. At the evaluation of the incident it was identified that the pre-fire plans did not give sufficient information in order to make the appropriate decisions. Questions raised based on the incident are how decisions are made and orders are delegated with respect to the incident command, which fire fighting tactic should be used, which types of extinguishing media should be used, what are the risks with respect to safety of staff and safety of the reactor. Lessons learned from the fire at Forsmark were that pre-incident planning was at hand but the information was not sufficient to make the correct initial decisions that might be critical for life and property. One of the most crucial ingredients in all safety related work is to utilize previous experience in order to maintain a high degree of safety. Lessons learnt are also the foundation on which the ability to construct or create strong barriers against a certain fault phenomena, fault mechanism or type of initial event. In the case of nuclear processes, fire is considered as an important and critical initial event which has to be recognized in a number of cases in order to maintain a safe process. The likelihood for a fire to represent an initial event should not be underestimated and can therefore not be neglected, probabilistically or deterministically, unless the inherent safety systems can not control the event in an acceptable manner. Regardless of safety measures and lessons learnt from previous experiences in the construction and the operation of the nuclear facility, fires can occur. Previous experiences point out that process system, e.g. systems that are part of the turbine, are more frequently subject to fire incidents compared to ordinary safety systems. Fires in electrical components, often electrical cabinets, can be difficult to handle and to extinguish quickly. This report presents the background work

  15. Aluminum powder metallurgy processing

    Energy Technology Data Exchange (ETDEWEB)

    Flumerfelt, J.F.

    1999-02-12

    The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization, commercial inert gas atomization, and gas atomization reaction synthesis (GARS). A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

  16. Fire Power

    Science.gov (United States)

    Denker, Deb; West, Lee

    2009-01-01

    For education administrators, campus fires are not only a distressing loss, but also a stark reminder that a campus faces risks that require special vigilance. In many ways, campuses resemble small communities, with areas for living, working and relaxing. A residence hall fire may raise the specter of careless youth, often with the complication of…

  17. Fire Power

    Science.gov (United States)

    Denker, Deb; West, Lee

    2009-01-01

    For education administrators, campus fires are not only a distressing loss, but also a stark reminder that a campus faces risks that require special vigilance. In many ways, campuses resemble small communities, with areas for living, working and relaxing. A residence hall fire may raise the specter of careless youth, often with the complication of…

  18. On fire

    DEFF Research Database (Denmark)

    Hansen, Helle Rabøl

    The title of this paper: “On fire”, refers to two (maybe three) aspects: firstly as a metaphor of having engagement in a community of practice according to Lave & Wenger (1991), and secondly it refers to the concrete element “fire” in the work of the fire fighters – and thirdly fire as a signifier...

  19. 46 CFR 28.315 - Fire pumps, fire mains, fire hydrants, and fire hoses.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Fire pumps, fire mains, fire hydrants, and fire hoses... After September 15, 1991, and That Operate With More Than 16 Individuals on Board § 28.315 Fire pumps, fire mains, fire hydrants, and fire hoses. (a) Each vessel 36 feet (11.8 meters) or more in length must...

  20. Forest-fire models

    Science.gov (United States)

    Haiganoush Preisler; Alan Ager

    2013-01-01

    For applied mathematicians forest fire models refer mainly to a non-linear dynamic system often used to simulate spread of fire. For forest managers forest fire models may pertain to any of the three phases of fire management: prefire planning (fire risk models), fire suppression (fire behavior models), and postfire evaluation (fire effects and economic models). In...

  1. Relapse of Extinguished Fear after Exposure to a Dangerous Context Is Mitigated by Testing in a Safe Context

    Science.gov (United States)

    Goode, Travis D.; Kim, Janice J.; Maren, Stephen

    2015-01-01

    Aversive events can trigger relapse of extinguished fear memories, presenting a major challenge to the long-term efficacy of therapeutic interventions. Here, we examined factors regulating the relapse of extinguished fear after exposure of rats to a dangerous context. Rats received unsignaled shock in a distinct context ("dangerous"…

  2. High resolution fire risk mapping in Italy

    Science.gov (United States)

    Fiorucci, Paolo; Biondi, Guido; Campo, Lorenzo; D'Andrea, Mirko

    2014-05-01

    extinguishing actions, leaving more resources to improve safety in areas at risk. With the availability of fire perimeters mapped over a period spanning from 5 to 10 years, depending by the region, a procedure was defined in order to assess areas at risk with high spatial resolution (900 m2) based on objective criteria by observing past fire events. The availability of fire perimeters combined with a detailed knowledge of topography and land cover allowed to understand which are the main features involved in forest fire occurrences and their behaviour. The seasonality of the fire regime was also considered, partitioning the analysis in two macro season (November- April and May- October). In addition, the total precipitation obtained from the interpolation of 30 years-long time series from 460 raingauges and the average air temperature obtained downscaling 30 years ERA-INTERIM data series were considered. About 48000 fire perimeters which burnt about 5500 km2 were considered in the analysis. The analysis has been carried out at 30 m spatial resolution. Some important considerations relating to climate and the territorial features that characterize the fire regime at national level contribute to better understand the forest fire phenomena. These results allow to define new strategies for forest fire prevention and management extensible to other geographical areas.

  3. Induced polarization signature of coal seam fires

    Science.gov (United States)

    Shao, Zhenlu; Revil, André; Mao, Deqiang; Wang, Deming

    2017-03-01

    Coal seam fires are a worldwide disaster of both ecological and economic importance. Their remote detection from the ground surface or using airborne techniques is required for developing efficient strategies to extinguish them. We investigate here the use of time-domain-induced polarization to localize coal seam fires. For laboratory experiments, we first introduce a modified time-domain-induced polarization methodology to quickly acquire and invert the secondary voltage distribution mapped after the shutdown of the primary current. A set of sandbox experiments is conducted in which coal is embedded into humidified sand. Raw coal alone generates significant induced polarization anomalies, above those shown by the sand. Even higher induced polarization anomalies are detected in presence of a coal seam fire. We postulate that the higher chargeability is due to the pyrolysis, which may enhance electronic polarization or the polarization associated with the cation exchange capacity (CEC) of the material. The position of the coal seam fire is well recovered inside the tank by inverting the secondary voltages in term of a source current density distribution. We also collected field data over a recognized coal seam fire in Colorado, USA. A chargeability anomaly (∼800 mV V-1) and a resistivity anomaly (∼1 Ohm m) are observed at the position of the coal seam fire. We propose a normalized burning front index (a scaled normalized chargeability) to image and localize, without ambiguity, the position of the coal seam fire in the subsurface. The 3-D reconstructed target is located below a negative self-potential anomaly (similarly to what is observed in laboratory experiments) and a temperature anomaly recorded at a depth of 30 cm.

  4. Toxic fluoride gas emissions from lithium-ion battery fires.

    Science.gov (United States)

    Larsson, Fredrik; Andersson, Petra; Blomqvist, Per; Mellander, Bengt-Erik

    2017-08-30

    Lithium-ion battery fires generate intense heat and considerable amounts of gas and smoke. Although the emission of toxic gases can be a larger threat than the heat, the knowledge of such emissions is limited. This paper presents quantitative measurements of heat release and fluoride gas emissions during battery fires for seven different types of commercial lithium-ion batteries. The results have been validated using two independent measurement techniques and show that large amounts of hydrogen fluoride (HF) may be generated, ranging between 20 and 200 mg/Wh of nominal battery energy capacity. In addition, 15-22 mg/Wh of another potentially toxic gas, phosphoryl fluoride (POF3), was measured in some of the fire tests. Gas emissions when using water mist as extinguishing agent were also investigated. Fluoride gas emission can pose a serious toxic threat and the results are crucial findings for risk assessment and management, especially for large Li-ion battery packs.

  5. Heat shields for aircraft - A new concept to save lives in crash fires.

    Science.gov (United States)

    Neel, C. B.; Parker, J. A.; Fish, R. H.; Henshaw, J.; Newland, J. H.; Tempesta, F. L.

    1971-01-01

    A passenger compartment surrounded by a fire-retardant shell, to protect the occupants long enough for the fire to burn out or for fire-fighting equipment to reach the aircraft and extinguish it, is proposed as a new concept for saving lives in crash fires. This concept is made possible by the recent development of two new fire-retardant materials: a very lightweight foam plastic, called polyisocyanurate foam, and an intumescent paint. Exposed to heat, the intumescent paint expands to many times its original thickness and insulates the surface underneath it. Demonstration tests are illustrated, described and discussed. However, some problems, such as preventing fuselage rupture and protecting windows, must be solved before such a system can be used.

  6. Modification of poly(styrene-block-butadiene-block-styrene) [SBS] with phosphorus containing fire retardants

    DEFF Research Database (Denmark)

    Chernyy, Sergey; Ullah, Saif; Jomaas, Grunde;

    2015-01-01

    application of the H3PO4 modified SBS as a fire retardant additive for bitumen material, in combination with synergetic melamine species, offered 25% better self-extinguishing properties of such formulation already at a low loading level of the fire retardant components (3.5 wt.%).......An elaborate survey of the chemical modification methods for endowing highly flammable SBS with increased fire resistant properties by means of chemical modification of the polymer backbone with phosphorus containing fire retardant species is presented. Optimal conditions for free radical addition...... of the Psingle bondH containing fire retardants to a double bonds of poly(butadiene) block of SBS were found, affording varied degree of the modification (0.2–21 mol%). Alternatively, a two-step procedure based on an epoxidation step followed by hydrolysis of the epoxides with phosphoric acid was developed...

  7. School fire in Iran: simple actions save lives.

    Science.gov (United States)

    Ostad Taghizadeh, A; Mowafi, H; Ardalan, A

    2013-03-31

    On December 5, 2012 a fire broke out in a primary school in Iran, causing injuries to 26 children and two deaths. The fire came from an oil stove. Rather than evacuate the classroom and use the fire extinguisher, the teacher attempted to remove the stove itself from the classroom. During this process an explosion occurred resulting in a haphazard attempt at evacuation. This tragedy highlights gaps in both the policy and practice of fire safety. From 2005 to 2012, Iran experienced six large school fires that led to 67 injuries and five deaths. Five events were related to oil stoves. About 30% of Iran's classrooms use oil stoves for heating during the winter with 3.4 million students and 150,000 teachers at risk. Iran's Ministry of Education has mandated that regular training of school personnel in fire safety measures should be organized but no safety officer is tasked to prepare and conduct this training. Instead, the task is delegated to the Fire Departments, which fall under municipal administrations; however, such departments do not exist in 93% of the rural areas of Iran. School fires are not unique to Iran. Similar tragic events have occurred in several middle-income countries (India, Kenya, Russia) over the last decade. This article presents an overview of school fires in Iran and proposes preventive strategies through a reform in policy making and practice, including education of students and school personnel along with regular drills, designation of a fire safety officer, and development of a countrywide school fire registry.

  8. Failure to extinguish fear and genetic variability in the human cannabinoid receptor 1

    NARCIS (Netherlands)

    Heitland, I.; Klumpers, F.; Oosting, R.S.; Evers, D.J.; Leon Kenemans, J.; Baas, J.M.

    2012-01-01

    Failure to extinguish fear can lead to persevering anxiety and has been postulated as an important mechanism in the pathogenesis of human anxiety disorders. In animals, it is well documented that the endogenous cannabinoid system has a pivotal role in the successful extinction of fear, most importan

  9. Failure to extinguish fear and genetic variability in the human cannabinoid receptor 1

    NARCIS (Netherlands)

    Heitland, I.; Klumpers, F.; Oosting, R.S.; Evers, D.J.; Leon Kenemans, J.; Baas, J.M.

    2012-01-01

    Failure to extinguish fear can lead to persevering anxiety and has been postulated as an important mechanism in the pathogenesis of human anxiety disorders. In animals, it is well documented that the endogenous cannabinoid system has a pivotal role in the successful extinction of fear, most

  10. Mechanisms of Resurgence II: Response-Contingent Reinforcers Can Reinstate a Second Extinguished Behavior

    Science.gov (United States)

    Winterbauer, Neil E.; Bouton, Mark E.

    2011-01-01

    Three experiments with rat subjects examined resurgence of an extinguished instrumental response using the procedure introduced by Epstein (1983) with pigeons. There were three phases: (1) initial acquisition of pressing on a lever (L1) for pellet reward, (2) extinction of L1, and (3) a test session in which a second lever (L2) was inserted,…

  11. 30 CFR 75.1107-11 - Extinguishing agents; requirements on mining equipment employed in low coal.

    Science.gov (United States)

    2010-07-01

    ... equipment employed in low coal. 75.1107-11 Section 75.1107-11 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES... § 75.1107-11 Extinguishing agents; requirements on mining equipment employed in low coal. On...

  12. Behavior and Preparedness to Fire Hazard in High Density Settlements in Bandung

    Directory of Open Access Journals (Sweden)

    Saut Sagala

    2016-08-01

    Full Text Available Fire is one of the hazards that may affect urban areas with high density settlements. Thus, research on fire mitigation is important to be conducted. This paper examines the behavior and preparedness of occupants in high density settlements towards fire risks in urban area. The case study is located at Kelurahan Sukahaji, Kecamatan Babakan Ciparay, Bandung that has very high density settlement as well as prone to fire hazards. This study assess 232 respondents in the study areas on information related to demography, understanding about fire, behavior and preparedness. The respondents understanding on the types of fire sources are still low. Similarly, the behavior related to the activites using fire are still dangerous because some activities are conducted with other activities which make people less aware of the fire hazards. Nevertheless, their knowledge on how to extinguish fires are quite good. This paper recommends more trainings on knowledge of fire source and behavior to be conducted to occupants living in high density settlements in order to reduce fire disaster risk.

  13. Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders

    OpenAIRE

    Ali, Msheer Hasan; Dinkha, Youkhanna Zayia; James H. Haido

    2017-01-01

    In this article, the efficiency of waste glass powder was investigated in enhancing the mechanical properties of concrete at high temperature. Chemical composition of this powder reveals that it plays good role as effective inert very fine material in concrete strength improvement. Conventional reactive pozzolanic powder of silica fume was used also in present work to show the degradation degree in concrete strength under firing in comparison to concrete made with waste glass powder. The expe...

  14. Fire safety

    Energy Technology Data Exchange (ETDEWEB)

    Keski-Rahkonen, O.; Bjoerkman, J.; Hostikka, S.; Mangs, J. [VTT Building Technology, Espoo (Finland); Huhtanen, R. [VTT Energy, Espoo (Finland); Palmen, H.; Salminen, A.; Turtola, A. [VTT Automation, Espoo (Finland)

    1998-07-01

    According to experience and probabilistic risk assessments, fires present a significant hazard in a nuclear power plant. Fires may be initial events for accidents or affect safety systems planned to prevent accidents and to mitigate their consequences. The project consists of theoretical work, experiments and simulations aiming to increase the fire safety at nuclear power plants. The project has four target areas: (1) to produce validated models for numerical simulation programmes, (2) to produce new information on the behavior of equipment in case of fire, (3) to study applicability of new active fire protecting systems in nuclear power plants, and (4) to obtain quantitative knowledge of ignitions induced by important electric devices in nuclear power plants. These topics have been solved mainly experimentally, but modelling at different level is used to interpret experimental data, and to allow easy generalisation and engineering use of the obtained data. Numerical fire simulation has concentrated in comparison of CFD modelling of room fires, and fire spreading on cables on experimental data. So far the success has been good to fair. A simple analytical and numerical model has been developed for fire effluents spreading beyond the room of origin in mechanically strongly ventilated compartments. For behaviour of equipment in fire several full scale and scaled down calorimetric experiments were carried out on electronic cabinets, as well as on horizontal and vertical cable trays. These were carried out to supply material for CFD numerical simulation code validation. Several analytical models were developed and validated against obtained experimental results to allow quick calculations for PSA estimates as well as inter- and extrapolations to slightly different objects. Response times of different commercial fire detectors were determined for different types of smoke, especially emanating from smoldering and flaming cables to facilitate selection of proper detector

  15. Granulation of fine powder

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ching-Fong

    2016-08-09

    A mixture of fine powder including thorium oxide was converted to granulated powder by forming a first-green-body and heat treating the first-green-body at a high temperature to strengthen the first-green-body followed by granulation by crushing or milling the heat-treated first-green-body. The granulated powder was achieved by screening through a combination of sieves to achieve the desired granule size distribution. The granulated powder relies on the thermal bonding to maintain its shape and structure. The granulated powder contains no organic binder and can be stored in a radioactive or other extreme environment. The granulated powder was pressed and sintered to form a dense compact with a higher density and more uniform pore size distribution.

  16. 30 CFR 75.1101-15 - Construction of dry powder chemical systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction of dry powder chemical systems. 75.1101-15 Section 75.1101-15 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-15 Construction of dry powder...

  17. 30 CFR 75.1101-13 - Dry powder chemical systems; general.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Dry powder chemical systems; general. 75.1101-13 Section 75.1101-13 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-13 Dry powder chemical systems;...

  18. 30 CFR 75.1101-14 - Installation of dry powder chemical systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of dry powder chemical systems. 75.1101-14 Section 75.1101-14 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-14 Installation of dry powder...

  19. Spontaneous Recovery But Not Reinstatement of the Extinguished Conditioned Eyeblink Response in the Rat

    Science.gov (United States)

    Thanellou, Alexandra; Green, John T.

    2011-01-01

    Reinstatement, the return of an extinguished conditioned response (CR) after reexposure to the unconditioned stimulus (US), and spontaneous recovery, the return of an extinguished CR with the passage of time, are two of four well-established phenomena which demonstrate that extinction does not erase the conditioned stimulus (CS)-US association. However, reinstatement of extinguished eyeblink CRs has never been demonstrated and spontaneous recovery of extinguished eyeblink CRs has not been systematically demonstrated in rodent eyeblink conditioning. In Experiment 1, US reexposure was administered 24 hours prior to a reinstatement test. In Experiment 2, US reexposure was administered 5 min prior to a reinstatement test. In Experiment 3, a long, discrete cue (a houselight), present in all phases of training and testing, served as a context within which each trial occurred to maximize context processing, which in other preparations has been shown to be required for reinstatement. In Experiment 4, an additional group was included that received footshock exposure, rather than US reexposure, between extinction and test, and contextual freezing was measured prior to test. Spontaneous recovery was robust in Experiments 3 and 4. In Experiment 4, context freezing was strong in a group given footshock exposure but not in a group given eyeshock US reexposure. There was no reinstatement observed in any experiment. With stimulus conditions that produce eyeblink conditioning and research designs that produce reinstatement in other forms of classical conditioning, we observed spontaneous recovery but not reinstatement of extinguished eyeblink CRs. This suggests that reinstatement, but not spontaneous recovery, is a preparation- or substrate-dependent phenomenon. PMID:21517145

  20. Assuring safety of blasting operations using powder inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Mullayanov, F.I.; Gumerov, A.G.; Khayrullin, N.N.; Mal' tsev, A.A.; Spiridonov, V.P.

    1982-01-01

    The essence of the proposed fire protection method consists in inhibiting the hydrocarbon-air zone in which explosive charges are set off by using powder compositions. When inserting charges the danger areas are the ground just above the borehole and when cutting oil pipelines it is the area about the tube space.

  1. Cow dung powder poisoning

    Directory of Open Access Journals (Sweden)

    Khaja Mohideen Sherfudeen

    2015-01-01

    Full Text Available Cow dung, which has germicidal property, was used in ancient days to clean living premises in South India. Nowadays, people are using commercially available synthetic cow dung powder. It is locally known as "saani powder" in Tamil Nadu. It is freely available in homes and is sometimes accidentally consumed by children. It is available in two colors - yellow and green. Cow dung powder poisoning is common in districts of Tamil Nadu such as Coimbatore, Tirupur, and Erode. We report two cases of yellow cow dung powder poisoning from our hospital.

  2. Cow dung powder poisoning.

    Science.gov (United States)

    Sherfudeen, Khaja Mohideen; Kaliannan, Senthil Kumar; Dammalapati, Pavan Kumar

    2015-11-01

    Cow dung, which has germicidal property, was used in ancient days to clean living premises in South India. Nowadays, people are using commercially available synthetic cow dung powder. It is locally known as "saani powder" in Tamil Nadu. It is freely available in homes and is sometimes accidentally consumed by children. It is available in two colors - yellow and green. Cow dung powder poisoning is common in districts of Tamil Nadu such as Coimbatore, Tirupur, and Erode. We report two cases of yellow cow dung powder poisoning from our hospital.

  3. Categorical modeling on electrical anomaly of room-and-pillar coal mine fires and application for field electrical resistivity tomography

    Science.gov (United States)

    Song, Wujun; Wang, Yanming; Shao, Zhenlu

    2017-01-01

    In order to improve the accuracy of fire area delineation in coalfield with electrical prospecting, the categorical geoelectric models of coal fires are established according to geological and mining conditions. The room-and-pillar coal mine fires are divided into three types which are coal seam fire, goaf fire and subsidence area fire, respectively, and forward electrical simulations and inversion analysis of each type of coal fire are implemented. Simulation results show that the resistance anomalies of goaf fires exist around one and a half to two times higher than background field, in contrast, coal seam and subsidence area fires performance low resistivity response which are roughly half to two-third of background field resistivity, respectively. Identification of different fire types and delineation of coal fire areas are further presented. The inversion results which are validated by borehole survey prove that the presented method could eliminate the omission of coal fires with high resistance anomaly and provide a novel reference for fire extinguishing in the future.

  4. Inhalation of phosphine gas following a fire associated with fumigation of processed pistachio nuts.

    Science.gov (United States)

    O'Malley, Michael; Fong, Harvard; Sánchez, Martha E; Roisman, Rachel; Nonato, Yvette; Mehler, Louise

    2013-01-01

    On December 10, 2009, a fumigation stack containing aluminum phosphide became soaked with rain water and caught fire at a pistachio processing plant in Kern County, California. Untrained plant personnel responding to the fire had exposure to pyrolysis by-products, particulates, and extinguisher ingredients. Ten workers taken for medical evaluation had respiratory and nonspecific systemic symptoms consistent with exposure to phosphine gas. Six of the 10 workers had respiratory distress, indicated by chest pain, shortness of breath, elevated respiratory rate, or decreased oxygen saturation. Recommendations are made for the management of similar illnesses and prevention of similar exposures.

  5. OR fire virtual training simulator: design and face validity.

    Science.gov (United States)

    Dorozhkin, Denis; Olasky, Jaisa; Jones, Daniel B; Schwaitzberg, Steven D; Jones, Stephanie B; Cao, Caroline G L; Molina, Marcos; Henriques, Steven; Wang, Jinling; Flinn, Jeff; De, Suvranu

    2016-12-30

    The Virtual Electrosurgical Skill Trainer is a tool for training surgeons the safe operation of electrosurgery tools in both open and minimally invasive surgery. This training includes a dedicated team-training module that focuses on operating room (OR) fire prevention and response. The module was developed to allow trainees, practicing surgeons, anesthesiologist, and nurses to interact with a virtual OR environment, which includes anesthesia apparatus, electrosurgical equipment, a virtual patient, and a fire extinguisher. Wearing a head-mounted display, participants must correctly identify the "fire triangle" elements and then successfully contain an OR fire. Within these virtual reality scenarios, trainees learn to react appropriately to the simulated emergency. A study targeted at establishing the face validity of the virtual OR fire simulator was undertaken at the 2015 Society of American Gastrointestinal and Endoscopic Surgeons conference. Forty-nine subjects with varying experience participated in this Institutional Review Board-approved study. The subjects were asked to complete the OR fire training/prevention sequence in the VEST simulator. Subjects were then asked to answer a subjective preference questionnaire consisting of sixteen questions, focused on the usefulness and fidelity of the simulator. On a 5-point scale, 12 of 13 questions were rated at a mean of 3 or greater (92%). Five questions were rated above 4 (38%), particularly those focusing on the simulator effectiveness and its usefulness in OR fire safety training. A total of 33 of the 49 participants (67%) chose the virtual OR fire trainer over the traditional training methods such as a textbook or an animal model. Training for OR fire emergencies in fully immersive VR environments, such as the VEST trainer, may be the ideal training modality. The face validity of the OR fire training module of the VEST simulator was successfully established on many aspects of the simulation.

  6. Development of gas fire detection system using tunable diode laser absorption spectroscopy

    Science.gov (United States)

    Jiang, Y. L.; Li, G.; Yang, T.; Wang, J. J.

    2017-01-01

    The conventional fire detection methods mainly produce an alarm through detecting the changes in smoke concentration, flame radiation, heat and other physical parameters in the environment, but are unable to provide an early warning of a fire emergency. We have designed a gas fire detection system with a high detection sensitivity and high selectivity using the tunable semiconductor diode laser as a light source and combining wavelength modulation and harmonic detection technology. This system can invert the second harmonic signal obtained to obtain the concentration of carbon monoxide gas (a fire characteristic gas) so as to provide an early warning of fire. We reduce the system offset noise and the background noise generated due to the laser interference by deducting the system background spectrum lines from the second harmonic signal. This can also eliminate the interference of other gas spectral lines to a large extent. We detected the concentration of the carbon monoxide gas generated in smoldering sandalwood fire and open beech wood fire with the homemade fire simulator, and tested the lowest detectable limit of system. The test results show that the lowest detectable limit can reach 5×10-6 the system can maintain stable operation for a long period of time and can automatically trigger a water mist fire extinguishing system, which can fully meet the needs of early fire warning.

  7. Fire Research Enclosure

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Simulates submarine fires, enclosed aircraft fires, and fires in enclosures at shore facilities .DESCRIPTION: FIRE I is a pressurizable, 324 cu m(11,400 cu...

  8. Fire Research Enclosure

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Simulates submarine fires, enclosed aircraft fires, and fires in enclosures at shore facilities . DESCRIPTION: FIRE I is a pressurizable, 324 cu m(11,400...

  9. Active Fire Mapping Program

    Science.gov (United States)

    Active Fire Mapping Program Current Large Incidents (Home) New Large Incidents Fire Detection Maps MODIS Satellite Imagery VIIRS Satellite Imagery Fire Detection GIS Data Fire Data in Google Earth ...

  10. Fire-Retardant Polymeric Additives

    Science.gov (United States)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    component forms polybenzoxazole (PBO) in a reaction that absorbs heat from its surroundings. PBO under thermal stress cross-links, forming a protective char layer, which thermally insulates the polymer. Thus, the formation of the char layer further assists to extinguish the fire by preventing vaporization of the polymeric fuel.

  11. Investigation of the Extinguishing Features for Liquid Fuels and Organic Flammable Liquids Atomized by a Water Flow

    OpenAIRE

    2016-01-01

    The processes of heat and mass transfer were investigated experimentally while moving and evaporating the atomized water flow in high-temperature combustion products of typical liquid fuels and organic flammable liquids: gasoline, kerosene, acetone, crude oil, industrial alcohol. We determined typical periods of liquid extinguishing by an atomized water flow of various dispersability. Data of the discharge of extinguishing medium corresponding to various parameters of atomization and duration...

  12. Fire Models and Design Fires

    DEFF Research Database (Denmark)

    Poulsen, Annemarie

    The aim of this project is to perform an experimental study on the influence of the thermal feedback on the burning behavior of well ventilated pre-flashover fires. For the purpose an experimental method has been developed. Here the same identical objects are tested under free burn conditions...... carried out by Carleton University and NRC-IRC performed on seven different types of fire loads representing commercial premises, comprise the tests used for the study. The results show that for some of the room test the heat release rate increased due to thermal feedback compared to free burn for a pre......-flashover fire. Two phenomena were observed, that relate well to theory was found. In an incipient phase the heat release rate rose with the temperature of the smoke layer/enclosure boundaries. This increase was also found to depend on the flammability properties of the burning object. The results also...

  13. Compaction of Titanium Powders

    Energy Technology Data Exchange (ETDEWEB)

    Gerdemann, Stephen,J; Jablonski, Paul, J

    2011-05-01

    Accurate modeling of powder densification has been an area of active research for more than 60 years. The earliest efforts were focused on linearization of the data because computers were not readily available to assist with curve-fitting methods. In this work, eight different titanium powders (three different sizes of sponge fines<150 {micro}m,<75 {micro}m, and<45 {micro}m; two different sizes of a hydride-dehydride [HDH]<75 {micro}m and<45 {micro}m; an atomized powder; a commercially pure [CP] Ti powder from International Titanium Powder [ITP]; and a Ti 6 4 alloy powder) were cold pressed in a single-acting die instrumented to collect stress and deformation data during compaction. From these data, the density of each compact was calculated and then plotted as a function of pressure. The results show that densification of all the powders, regardless of particle size, shape, or chemistry, can be modeled accurately as the sum of an initial density plus the sum of a rearrangement term and a work-hardening term. These last two terms are found to be a function of applied pressure and take the form of an exponential rise.

  14. Fire Brigade

    CERN Multimedia

    2004-01-01

    With effect from 15 April 2004, the Fire Brigade will no longer issue master keys on loan. Contractors' personnel requiring access to locked premises in order to carry out work must apply to the CERN staff member responsible for the contract concerned.

  15. Fire Safety

    Science.gov (United States)

    ... way to the nearest exit. Don't stop. Don't go back . In case of fire, do not try to rescue pets or possessions. Once you are out, do not go back in for any reason. Firefighters have the best chance of rescuing people who are trapped. Let firefighters know right away if anyone is missing. ...

  16. Modification of poly(styrene-block-butadiene-block-styrene) [SBS] with phosphorus containing fire retardants

    DEFF Research Database (Denmark)

    Chernyy, Sergey; Ullah, Saif; Jomaas, Grunde

    2015-01-01

    An elaborate survey of the chemical modification methods for endowing highly flammable SBS with increased fire resistant properties by means of chemical modification of the polymer backbone with phosphorus containing fire retardant species is presented. Optimal conditions for free radical addition...... resulting in 20 mol% of poly(butadiene) block modification. Based on TGA results, organophosporus-modified SBS was found to be amenable to charring – a property which correlated directly with the reduced flammability of the modified polymer observed in Cone Calorimetry tests. Furthermore, conceptually novel...... application of the H3PO4 modified SBS as a fire retardant additive for bitumen material, in combination with synergetic melamine species, offered 25% better self-extinguishing properties of such formulation already at a low loading level of the fire retardant components (3.5 wt.%)....

  17. Characterization of smokeless powders using multiplexed collision-induced dissociation mass spectrometry and chemometric procedures.

    Science.gov (United States)

    Reese, Kristen L; Jones, A Daniel; Smith, Ruth Waddell

    2017-03-01

    This work demonstrates a non-targeted mass spectrometry approach for identification of organic compounds in smokeless powders. Unburned powders were removed from various commercial ammunitions of different brand, primer composition, caliber, and age. The unburned powders and corresponding fired residues were analyzed by liquid chromatography-atmospheric pressure chemical ionization-time-of-flight mass spectrometry (LC-APCI-TOFMS). Multiplexed collision-induced dissociation was performed at increasing collision potentials resulting in successive fragmentation that provided structural information for compound identification in a non-targeted manner. Nine compounds were identified in the powders, including akardite II, ethyl centralite, diphenylamine, N-nitrosodiphenylamine, and dibutyl phthalate. Multivariate statistical procedures were performed to first investigate association and discrimination of the unburned powders. Principal components analysis (PCA) of the chemical profiles suggested nine distinct groups of powders, according to the dominant organic compounds present. The clusters formed in hierarchical cluster analysis (HCA) were mostly in agreement with PCA groupings although HCA provided a metric to quantify the similarity. Finally, association of the fired residue to the corresponding unburned powder was possible although the success was highly dependent on the composition of the unburned powder and the extent of compound depletion as a result of firing.

  18. Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders

    Energy Technology Data Exchange (ETDEWEB)

    Asit Biswas Andrew J. Sherman

    2006-09-25

    This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

  19. Powder detergents production plant

    OpenAIRE

    Stanković Mirjana S.; Pezo Lato L.

    2003-01-01

    The IGPC Engineering Department designed basic projects for powder detergent production plant, using technology developed in the IGPC laboratories, in 1998. - 2000. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects, a production plant with a capacity of 25,000 t/y was manufactured, at "Delta In", Zrenjanin, in 2000.This technology was an innovation, because new approach in mixing a powder materials was used, as well as introducing ...

  20. 220kV地下变电站消防技术优化研究%Optimization Research on Fire Prevention Technologies and Strategies for 220kV Underground Substation

    Institute of Scientific and Technical Information of China (English)

    高晓华; 朱亚平

    2011-01-01

    以上海220 kV济南站为例,对220 kV全地下变电站火灾危险性进行分析,结合规范确定消防灭火系统的技术原则和策略,介绍了室内外消火栓、预作用自动喷水灭火、主变水喷雾灭火、烟烙尽全淹没气体灭火、移动式灭火、火灾探测报警和消防排水等系统;以及济南站消防系统设计的方法、经验,并对消防系统的优化提出建议。%Taking the 220 kV Jinan underground substation as example,this article points out the fire hazard of underground substation and analyses the technical principles and strategies of its fire fighting system by combining relevant norms.The substation fire-fighting system includes the internal and external fire hydrants system,pre-action sprinkler system,water spray fire extinguishing system for main transformer,the gas fire extinguishing system,portable fire extinguishing system,the automatic fire alarm system and the drainage system for fire-fighting.After introducing the designing methods and practical experience of the fire-fighting system for Jinan underground substation,this article puts forward the suggestions on the optimization of fire-fighting system.

  1. Magnetically responsive enzyme powders

    Energy Technology Data Exchange (ETDEWEB)

    Pospiskova, Kristyna, E-mail: kristyna.pospiskova@upol.cz [Regional Centre of Advanced Technologies and Materials, Palacky University, Slechtitelu 11, 783 71 Olomouc (Czech Republic); Safarik, Ivo, E-mail: ivosaf@yahoo.com [Regional Centre of Advanced Technologies and Materials, Palacky University, Slechtitelu 11, 783 71 Olomouc (Czech Republic); Department of Nanobiotechnology, Institute of Nanobiology and Structural Biology of GCRC, Na Sadkach 7, 370 05 Ceske Budejovice (Czech Republic)

    2015-04-15

    Powdered enzymes were transformed into their insoluble magnetic derivatives retaining their catalytic activity. Enzyme powders (e.g., trypsin and lipase) were suspended in various liquid media not allowing their solubilization (e.g., saturated ammonium sulfate and highly concentrated polyethylene glycol solutions, ethanol, methanol, 2-propanol) and subsequently cross-linked with glutaraldehyde. Magnetic modification was successfully performed at low temperature in a freezer (−20 °C) using magnetic iron oxides nano- and microparticles prepared by microwave-assisted synthesis from ferrous sulfate. Magnetized cross-linked enzyme powders were stable at least for two months in water suspension without leakage of fixed magnetic particles. Operational stability of magnetically responsive enzymes during eight repeated reaction cycles was generally without loss of enzyme activity. Separation of magnetically modified cross-linked powdered enzymes from reaction mixtures was significantly simplified due to their magnetic properties. - Highlights: • Cross-linked enzyme powders were prepared in various liquid media. • Insoluble enzymes were magnetized using iron oxides particles. • Magnetic iron oxides particles were prepared by microwave-assisted synthesis. • Magnetic modification was performed under low (freezing) temperature. • Cross-linked powdered trypsin and lipase can be used repeatedly for reaction.

  2. Transparent fire protection; Transparenter Brandschutz. Die Glaeserne Manufaktur in Dresden

    Energy Technology Data Exchange (ETDEWEB)

    Kiel, M. [HHP Braunschweig Beratende Ingenieure GmbH, Braunschweig (Germany)

    2001-04-01

    The manufactory of glass in Dresden presents itself with the combination of using as a fire protection-technically particularly fastidious project. The target of transparency thereby achieved by arrangement of distance areas in the building, direct heat dissipation within the range of transitions and by gradated request of the fire resistance period of fire protection glazings. The occurring special problems for the interpretation of the fire extinguishing systems and the smoke exhaust systems were solved on experimental basis as well as numerically by different simulation calculations. The quality assurance in the finishing phase is a prerequisite for a lackfree acceptance and protects the meaningful cooperating of all fire protection mechanisms with the remaining building services. (orig.) [German] Die Glaeserne Manufaktur in Dresden stellt sich mit der Kombination von Nutzungen als brandschutztechnisch besonders anspruchsvolles Projekt dar. Das Ziel der Transparenz wird dabei erreicht durch Anordnung von Abstandsflaechen im Gebaeude, gezielte Waermeableitung im Bereich von Uebergaengen und durch gestufte Anforderungen an die Feuerwiderstandsdauer von Brandschutzverglasungen. Die auftretenden Sonderprobleme zur Auslegung der Loeschanlagen und der Rauchabzugsanlagen wurden auf experimenteller Grundlage sowie numerisch durch verschiedene Simulationsrechnungen geloest. Die Qualitaetssicherung in der Ausfuehrungsphase ist Voraussetzung fuer eine maengelfreie Abnahme und sichert das sinnvolle Zusammenwirken aller Brandschutzeinrichtungen mit der uebrigen Haustechnik. (orig.)

  3. Fire Symfonier

    DEFF Research Database (Denmark)

    Nielsen, Svend Hvidtfelt

    2009-01-01

    sidste fire symfonier. Den er måske snarere at opfatte som et præludium til disse. At påstå, at symfonierne fra Holmboes side er planlagt til at være beslægtede, ville være at gå for vidt. Alene de 26 år, der skiller den 10. fra den 13., gør påstanden - i bedste fald - dubiøs. Når deres udformning...... udkrystallisering som i de sidste små 30 år af hans virke har afkastet disse fire variationer over en grundlæggende central holmboesk fornemmelse for form, melodi, klang og rytme. Denne oplevelse har fået mig til at udforske symfonierne, for at finde til bunds i dette holmboeske fællestræk, som jeg mener her står...

  4. Biaxially textured articles formed by powder metallurgy

    Science.gov (United States)

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

  5. Updates of the fire protection system of the Juzbado Nuclear Fuel Fabrication Plant; Actualizaciones del Sistema de Proteccion Contra Incendios de la Fabrica de Combustible Nuclear de Juzbado

    Energy Technology Data Exchange (ETDEWEB)

    Dorado, P.; Palomo, J. J.; Romano, A.

    2015-07-01

    The Juzbado Nuclear Fuel Fabrication Plant fire protection system is one of the most important safety system of the plant. Every year, a large part of the annual investment is employed to improve this system, to update its technology, in order to improve detection and extinction capability to minimize fire risk. Over the last few years, several improvement projects have been carried out that focused on fire detection technology update and on optimization of local detectors integration with a centralized control system, as well as on an advanced public address system, which used clear and unambiguous messages improving personnel response to a plant evacuation. Planned projects and those, which are currently under development, focus on improving passive fire protection means as well as fire protection of key emergency response equipment s such as emergency diesel generators and fire extinguishing bombs. (Author)

  6. Fire Protection for Buildings

    Science.gov (United States)

    Edmunds, Jane

    1972-01-01

    Reviews attack on fire safety in high rise buildings made by a group of experts representing the iron and steel industry at a recent conference. According to one expert, fire problems are people oriented, which calls for emphasis on fire prevention rather than reliance on fire suppression and for fire pretection to be built into a structure.…

  7. 石油化工企业封闭式输煤钢结构栈桥水消防系统选型%Type selection of fire-fighting system for closed steel coal handling trestle in petrochemical enterprises

    Institute of Scientific and Technical Information of China (English)

    周乃兵; 曹立坤

    2012-01-01

    以1400 mm单皮带栈桥为例,对比分析了石油化工企业封闭式输煤钢结构栈桥采用自动喷水灭火系统及水喷雾灭火系统的相关技术参数及用水量情况,常规状态下,结合皮带运动及水喷雾灭火系统动作快的特点,建议石油化工企业榆煤栈桥水消防灭火系统采用水喷雾灭火系统.%Taking 1 400 mm single belt coal handling trestle as an example, the technical parameters and water consumption of automatic fire-extinguishing sprinkler system and water spray extinguishing system applied for closed steel coal handling trestle's fire-fighting in petrochemical enterprises were compared and analyzed. Under conventional condition, combined with the belt movement characteristics and the high flow speed of water spray extinguishing system, water spray extinguishing system was suggested to be used for coal handling trestle's fire-fighting in petrochemical enterprises.

  8. Evaluation of the AMEREX Model 775 Wheeled Extinguisher with Novec 1230

    Science.gov (United States)

    2014-11-18

    8 Figure 5. The F-100 Nacelle Mockup during the Pre-Burn Phase of a Rear Engine Fire Test .......9...Figure 6. A Firefighter Applying Agent into the F-100 Nacelle Mockup during a Rear Engine Fire Test...100 Mockup during an Access Panel Fire Test ..................................................................................................11

  9. FY 2000 Report on the results of international cooperative research scheme (power generation - No.3). Developmental research on high-performance plasma-assisted fine coal powder combustion mechanism for coal-fired power generation boilers to realize oilless ignition; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo seika hokokusho (hatsuden No.3). Oilless chakka wo jitsugensuru sekitan karyoku hatsuden bifuntan nenshoroyo koseino plasma jonen kiko no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the developmental research on the high-performance plasma-assisted fine coal powder combustion mechanism for coal-fired power generation boilers, a theme adopted by the international cooperative research scheme. The program for design/manufacture of the plasma torch manufactures laminar type torches for 100kW high power class and 10kW middle class. The high-performance plasma-assisted combustion mechanism is designed and manufactured using the torch. It has a structure which supplies secondary air and secondary coal flow to the primary coal flow. It is tested for starting up a commercial boiler firing finely pulverized coal, to confirm its functions. The tests for optimizing the oilless ignition and operation are conducted in Tashtagonal Iron Plant and Berdsk Chemical Plant. It is found that the cold start can be realized in the boiler, when the muffle burners are preheated for 30 to 40 minutes before the finely pulverized coal is supplied and the steady-state coal combustion is attained 3 to 5 minutes after the coal is supplied. The program for the combustion basics for the plasma-assisted mechanism collects the data related to its dependence on coal type. (NEDO)

  10. Selective Automatic Fire Extinguisher for Computers (SAFECOMP). Developmental Test and Evaluation/Initial Operational Test and Evaluation

    Science.gov (United States)

    1990-01-01

    Check shipping carton for unit mounting bracket and insure bracket has hole for safety pin . 3. Weigh unit for proper weight and record. Full...Weight 1050 grams (2.15 lb). Empty Weight 611 grams (1.25 lb). 4. Check for presence safety pin , proper installation in unit and secured with seal

  11. Fire Safety (For Parents)

    Science.gov (United States)

    ... curtains and furniture, and extinguish them before you go to bed. Make sure candles are in sturdy holders made of non-flammable material that won't tip over. Don't let older kids and teens use candles unsupervised in ...

  12. Development of a Test Protocol for Spacecraft Post-Fire Atmospheric Cleanup and Monitoring

    Science.gov (United States)

    Zuniga, David; Hornung, Steven D.; Haas, Jon P.; Graf, John C.

    2009-01-01

    Detecting and extinguishing fires, along with post-fire atmospheric cleaning and monitoring, are vital components of a spacecraft fire response system. Preliminary efforts focused on the technology evaluation of these systems under realistic conditions are described in this paper. While the primary objective of testing is to determine a smoke mitigation filter s performance, supplemental evaluations measuring the smoke-filled chamber handheld commercial off-the-shelf (COTS) atmospheric monitoring devices (combustion product monitors) are also conducted. The test chamber consists of a 1.4 cubic meter (50 cu. ft.) volume containing a smoke generator. The fuel used to generate the smoke is a mixture of polymers in quantities representative of materials involved in a circuit board fire as a typical spacecraft fire. Two fire conditions were examined: no flame and flame. No flame events are produced by pyrolyzing the fuel mixture in a quartz tube furnace with forced ventilation to produce a white, lingering-type smoke. Flame events ignite the smoke at the outlet of the tube furnace producing combustion characterized by a less opaque smoke with black soot. Electrochemical sensor measurements showed carbon monoxide is a major indicator of each fire. Acid gas measurements were recorded, but cross interferents are currently uncharacterized. Electrochemical sensor measurements and sample acquisition techniques from photoacoustic sensors are being improved. Overall, this research shows fire characterization using traditional analytical chemistry techniques is required to verify measurements recorded using COTS atmospheric monitoring devices.

  13. Progress in research and application of water mist fire suppression technology

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Water mist technology in fire suppression has been a subject of many investigations over the last decade. This paper introduces the concept of water mist technology and discusses its extinguishment mechanisms in comparison with other fire suppression systems briefly. A survey is made on the recent applications of water mist for (1) Class B spray and pool fires in machinery spaces, gas turbine enclosures, combat vehicles, and flammable liquid storage rooms; (2) Class A fires in residential occupancies, marine accommodations and public spaces, heritage buildings and libraries; (3) Class C fires in electronic equipment and computer rooms; and (4) the fires in aircraft onboard cabin and cargo compartments. The paper proceeds to review some new applications of water mist for the Class K fires in commercial cook rooms. Use of water mist for total-ship protection as well as the fire protection of heavy goods vehicle shuttle trains is also investigated. At last, the up-to-date development of corresponding test to evaluate the capabilities and limitaions of water mist is discussed.

  14. Investigation of Lab Fire Prevention Management System of Combining Root Cause Analysis and Analytic Hierarchy Process with Event Tree Analysis

    Directory of Open Access Journals (Sweden)

    Cheng-Chan Shih

    2016-01-01

    Full Text Available This paper proposed a new approach, combining root cause analysis (RCA, analytic hierarchy process (AHP, and event tree analysis (ETA in a loop to systematically evaluate various laboratory safety prevention strategies. First, 139 fire accidents were reviewed to identify the root causes and draw out prevention strategies. Most fires were caused due to runaway reactions, operation error and equipment failure, and flammable material release. These mostly occurred in working places of no prompt fire protection. We also used AHP to evaluate the priority of these strategies and found that chemical fire prevention strategy is the most important control element, and strengthening maintenance and safety inspection intensity is the most important action. Also together with our surveys results, we proposed that equipment design is also critical for fire prevention. Therefore a technical improvement was propounded: installing fire detector, automatic sprinkler, and manual extinguisher in the lab hood as proactive fire protections. ETA was then used as a tool to evaluate laboratory fire risks. The results indicated that the total risk of a fire occurring decreases from 0.0351 to 0.0042 without/with equipment taking actions. Establishing such system can make Environment, Health and Safety (EH&S office not only analyze and prioritize fire prevention policies more practically, but also demonstrate how effective protective equipment improvement can achieve and the probabilities of the initiating event developing into a serious accident or controlled by the existing safety system.

  15. Crown Fire Potential

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Crown fire potential was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The...

  16. Fire Ant Allergy

    Science.gov (United States)

    ... Treatments ▸ Library ▸ Allergy Library ▸ Fire ant allergy Share | Fire Ant Allergy This article has been reviewed by Thanai Pongdee, MD, FAAAAI Fire ants are a stinging insect typically found in ...

  17. Fire Ant Bites

    Science.gov (United States)

    ... Favorite Name: Category: Share: Yes No, Keep Private Fire Ant Bites Share | Fire ants are aggressive, venomous insects that have pinching ... across the United States, even into Puerto Rico. Fire ant stings usually occur on the feet or ...

  18. Cow dung powder poisoning

    OpenAIRE

    Khaja Mohideen Sherfudeen; Senthil Kumar Kaliannan; Pavan Kumar Dammalapati

    2015-01-01

    Cow dung, which has germicidal property, was used in ancient days to clean living premises in South India. Nowadays, people are using commercially available synthetic cow dung powder. It is locally known as “saani powder” in Tamil Nadu. It is freely available in homes and is sometimes accidentally consumed by children. It is available in two colors - yellow and green. Cow dung powder poisoning is common in districts of Tamil Nadu such as Coimbatore, Tirupur, and Erode. We report two cases of ...

  19. The fire protection design on the bunker/hod of the coal disposal system%燃煤处理系统煤仓/煤斗的消防保护设计

    Institute of Scientific and Technical Information of China (English)

    裴丽萍

    2009-01-01

    综合、和NFPA 850等相关规范的规定,以系统工程应用研究为基础,结合惰性气体灭火系统产品特点,对采用低压二氧化碳灭火系统的火力发电厂燃煤处理系统的煤仓/煤斗消防保护进行了设计思路的研究和探讨.%Refer to the related criterion numbered GB50229-2006, GB50193-1993,NFPA850 and so on, the design method of applying the low voltage carbon dioxide fire-extinguishing system to the bunker/hod fire protection for the coal disposal system in the fuel electric plant was studied based on the existing system engineering research results and the characteristics of the inert gases fire-extinguishing system.

  20. Design of Fire Protection Systems for Test Cabin of Space Shuttle%航天飞船地面试验舱灭火系统设计

    Institute of Scientific and Technical Information of China (English)

    周平; 张福顺

    2009-01-01

    针对低气压和富氧的条件,航天飞船试验舱灭火系统选用基于高效冷却作用的Novec1230和细水雾系统.结合工程设计,介绍了两种系统的灭火机理、工艺流程、系统组成、控制方式以及灭火特点等.%Due to the condition of low air pressure and rich oxygen, the fire protection systems for test cabin of space shuttle adopt Novec1230 and water mist based on highly efficient cooling function. Combined with the project design, the extinguishing mechanism, technological process, system composi-tion, control mode and extinguishing characteristics of Novec1230 and water mist fire protection system are presented.

  1. Properties of flat-pressed wood plastic composites containing fire retardants

    Science.gov (United States)

    Nadir Ayrilmis; Jan. T. Benthien; Heiko Thoemen; Robert H. White

    2011-01-01

    This study investigated physical, mechanical, and fire properties of the flat-pressed wood plastic composites (WPCs) incorporated with various fire retardants (FRs) [5 or 15% by weight (wt)] at 50 wt % of the wood flour (WF). The WPC panels were made from dry-blended WF, polypropylene (PP) with maleic anhydride grafted PP (2 wt %), and FR powder formulations using a...

  2. Fire and fire ecology: Concepts and principles

    Science.gov (United States)

    Mark A. Cochrane; Kevin C. Ryan

    2009-01-01

    Fire has been central to terrestrial life ever since early anaerobic microorganisms poisoned the atmosphere with oxygen and multicellular plant life moved onto land. The combination of fuels, oxygen, and heat gave birth to fire on Earth. Fire is not just another evolutionary challenge that life needed to overcome, it is, in fact, a core ecological process across much...

  3. Long run of wood powder fired gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Salman, Hassan [Energitekniskt Centrum, Piteaa (Sweden)

    2004-05-01

    Tests have been carried out on a biomass gasification test facility at Energy Technology Center in Piteaa (ETC). It was planned to run the facility batchwise for 100 hours. The main aim of these tests was to study the effects of the impurities in the product gas on the blades of a gas turbine. The impurities are the ash particles carried by the product gas and the vaporised metals from the fuel especially the alkali metals. Six successful tests could be done before a breakdown of the gas turbine due to a fouling of the blade tips and the turbine passage resulting in seizing of the turbine. However the runs were sufficient to give new experiences in the running of the plant. The atmospheric preheating by gas combustion in the cyclone appeared to be more reliable than the pressurised preheating with an oil burner. It is also observed that the gasification could be started when the cyclone temperature is 550-600 deg C instead of higher than 700 deg C that was used earlier. The reliability of the feeding system was improved and the plugging of the downcomers was eliminated. It was also observed that the flame stability in the modified combustion chamber of the turbine depends not only on the gas composition but also on the temperature of the gas. A gas temperature that is over 650 deg C gave stable combustion. The effects of the impurities in the gas were studied. Steel cylinders were placed at the inlet of the turbine and the deposits on them were analysed. The turbine wheel was disassembled after the last run and blades were cut and the deposits were analysed too. The analysis was done on the deposits by using scanning electron microscopy. The thickness of deposits was 30-60 {mu}m on the pressure side of the turbineblades while they were too thin to be resolved with the optical microscope on the suction side. Deposits were observed also on the blade-tips and on the turbine case. It was observed that the content of K in the deposits was higher than that in the fuel-ash while the content of Na is much less. The content of carbon is high in the deposits. Some of this carbon may be soot but some is also due to building of carbonates. The Cl-content in the deposits was below the measurement accuracy. That was expected as most of the chlorides have a lower condensation temperature than the average temperature in the turbine and because of formation of HCl. Most of the difficulties that appeared were either solved during this project or can be solved within reasonable costs. It is therefore worth to mention that it is possible to develop the facility further and run it continuously for long periods by introducing the following measures: Implementation of a cooling system for the pressure vessel; Continuous removing of the ashes from the cyclone; Improvement of flame stability in the combustion chamber; Continuous pressurized feeding of the fuel from the storage bin to the feeding bin.

  4. Ecological modeling of pollutants in accidental fire at the landfill waste

    Directory of Open Access Journals (Sweden)

    Stefanov Sonja B.

    2013-01-01

    Full Text Available Paper presents tyre as flammable material and some examples of tyre fires in the world. Uncontrolled tyre fires produce a lot of smoke and air pollutants, including benzene and polycyclic aromatic hydrocarbons (PAH. Great heat leads to the generation of pyrolytic oil which, when mixed with the fire extinguishing agent, contaminates the surrounding soil, surface water and underground water. Paper analyzes and presents in particular the emission factors of incomplete burning of waste car tyres. Metal dust emissions have been presented, volatile organic compund (VOC emissions, slightly volatile organic compound (SVOC emissions and emissions of polycyclic aromatic hydrocarbons (PAH. Evaluation of the effect on the air quality has been graphically presented by modelling of uncotrolled tyre burning by using EPA "SCREEN 3 MODEL".

  5. Extinguishing trace fear engages the retrosplenial cortex rather than the amygdala

    Science.gov (United States)

    Kwapis, Janine L.; Jarome, Timothy J.; Lee, Jonathan L.; Gilmartin, Marieke R.; Helmstetter, Fred J.

    2013-01-01

    Extinction learning underlies the treatment for a variety of anxiety disorders. Most of what is known about the neurobiology of extinction is based on standard “delay” fear conditioning, in which awareness is not required for learning. Little is known about how complex, explicit associations extinguish, however. “Trace” conditioning is considered to be a rodent model of explicit fear because it relies on both the cortex and hippocampus and requires explicit contingency awareness in humans. Here, we explore the neural circuit supporting trace fear extinction in order to better understand how complex memories extinguish. We first show that the amygdala is selectively involved in delay fear extinction; blocking intra-amygdala glutamate receptors disrupted delay, but not trace extinction. Further, ERK phosphorylation was increased in the amygdala after delay, but not trace extinction. We then identify the retrosplenial cortex (RSC) as a key structure supporting trace extinction. ERK phosphorylation was selectively increased in the RSC following trace extinction and blocking intra-RSC NMDA receptors impaired trace, but not delay extinction. These findings indicate that delay and trace extinction require different neural circuits; delay extinction requires plasticity in the amygdala whereas trace extinction requires the RSC. Anxiety disorders linked to explicit memory may therefore depend on cortical processes that have not been traditionally targeted by extinction studies based on delay fear. PMID:24055593

  6. Platelet-containing tantalum powders

    Energy Technology Data Exchange (ETDEWEB)

    Schiele, E.K.

    1988-04-26

    A method of forming platelet tantalum powders is described comprising the steps of: (a) providing an ingot-derived precursor tantalum powder, and (b) ball-milling the precursor powder for a time sufficient to form a platelet powder having an average FSSS of less than about 2 micrometers, a Scott density not greater than about 30 g/in/sup 3/ and a BET surface area of at least about 0.7 in/sup 2//g.

  7. Fire Propagation Performance of Intumescent Fire Protective Coatings Using Eggshells as a Novel Biofiller

    Directory of Open Access Journals (Sweden)

    M. C. Yew

    2014-01-01

    Full Text Available This paper aims to synthesize and characterize an effective intumescent fire protective coating that incorporates eggshell powder as a novel biofiller. The performances of thermal stability, char formation, fire propagation, water resistance, and adhesion strength of coatings have been evaluated. A few intumescent flame-retardant coatings based on these three ecofriendly fire retardant additives ammonium polyphosphate phase II, pentaerythritol and melamine mixed together with flame-retardant fillers, and acrylic binder have been prepared and designed for steel. The fire performance of the coatings has conducted employing BS 476: Part 6-Fire propagation test. The foam structures of the intumescent coatings have been observed using field emission scanning electron microscopy. On exposure, the coated specimens’ B, C, and D had been certified to be Class 0 due to the fact that their fire propagation indexes were less than 12. Incorporation of ecofriendly eggshell, biofiller into formulation D led to excellent performance in fire stopping (index value, (I=4.3 and antioxidation of intumescent coating. The coating is also found to be quite effective in water repellency, uniform foam structure, and adhesion strength.

  8. Pd Coated BaTiO3 Powder for Internal Electrode Applications

    Directory of Open Access Journals (Sweden)

    R. C. Stephenson

    2002-01-01

    new low cost air fired electrode technology. This paper presents a new electrode technology incorporating a uniform, continually coated AgPd over engineered dielectric particles. The resulting powder greatly reduces the consumption of precious metal, and provides superior thermal mechanical properties. This is achieved by matching the core ceramic structure of the powder to the manufacturer's dielectric, thereby controlling shrinkage while maintaining desired electrical properties.

  9. Fires Burning near Big Sur, California

    Science.gov (United States)

    2008-01-01

    Fires near Big Sur, Calif., continued to burn unchecked when the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument on NASA's Terra satellite captured this image on Sunday, June 29. In Northern California alone, fires have consumed more than 346,000 acres.At least 18,000 people have deployed to attempt to extinguish or control the flames. Air quality as far away as San Francisco has been adversely impacted by the dense clouds of smoke and ash blowing towards the northwest. The satellite image combines a natural color portrayal of the landscape with thermal infrared data showing the active burning areas in red. The dark area in the lower right is a previous forest fire. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. The broad spectral coverage and high spectral resolution of ASTER provides scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring surface heat balance. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate. Size: 35.4 by 57 kilometers (21.9 by 34.2 miles) Location: 36.1 degrees North latitude, 121.6 degrees West longitude Orientation: North at top Image Data: ASTER bands 3, 2, and 1 Original Data Resolution: 15 meters (49 feet) Dates Acquired: June 29, 2008

  10. Measuring Apparatus for Coal Powder

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measuring apparatus for coal powder, equipped with radioactive source, is a set of device andcan be used to measure the density in the pipes and cumulative consumed amount of coal powder in apower plant, and to examine and display the status of the coal powder input system. It is sketched asFig. 1.

  11. Electrical resistivity of coal-bearing rocks under high temperature and the detection of coal fires using electrical resistance tomography

    Science.gov (United States)

    Shao, Zhenlu; Wang, Deming; Wang, Yanming; Zhong, Xiaoxing; Tang, Xiaofei; Xi, Dongdong

    2016-02-01

    Coal fires are severe hazards to environment, health and safety throughout the world. Efficient and economical extinguishing of these fires requires that the extent of the subsurface coal fires should be delineated. Electrical and electromagnetic methods have been used to detect coal fires in recent years. However, the resistivity change of coal-bearing rocks at high temperature is rarely investigated. The resistivity characteristics of coal fires at different temperatures and depths are seldomly researched as well. In this paper, we present the results of measurements of several coal-bearing rocks' resistivity and permeability under high temperature. Two major causes for the change in resistivity with increasing temperature are recognized, there are the increase of charge carriers and thermal fracturing, of which the first one is probably the dominant cause. A set of 2-D simulations is carried out to compare the relation of resolution and efficiency of coal fires detection to temperature and depth when adopting the electrical resistance tomography. The simulation results show that the resolution and efficiency decrease with the decrease of temperature and the increase of depth. Finally, the electrical resistance tomography is used to delineate coal fires in the Anjialing Open Pit Mine. Most low-resistivity regions are verified as coal-fire areas according to the long-term monitoring of borehole temperature. The results indicate that the electrical resistance tomography can be used as a tool for the detection of coal fires.

  12. Fires, ecological effects of

    Science.gov (United States)

    W. J. Bond; Robert Keane

    2017-01-01

    Fire is both a natural and anthropogenic disturbance influencing the distribution, structure, and functioning of terrestrial ecosystems around the world. Many plants and animals depend on fire for their continued existence. Others species, such as rainforest plants species, are extremely intolerant of burning and need protection from fire. The properties of a fire...

  13. 消防领域科研统计调查%The statistical research on fire research hotspots

    Institute of Scientific and Technical Information of China (English)

    董里; 王万钢; 杨淳旭; 李艳艳

    2012-01-01

    Hotspots of fire research and changes in recent years were discussed and the trends in the development of the fire industry research were analyzed through the retrieval and classification statistics between the two databases of ScienceDirect and China National Knowledge Infrastructure, CNKI. Results showed that the number of papers published in China and other countries both increase, while the number of China is bigger; researches in China mostly focus on the fire extinguishing system, fire fighting and rescue, and fire extinguishing agent and fire retardant materials, which are the most unlikely mentioned in ScienceDirect; researches out of China are mainly about fire management, fire investigation, et al, which are paid medium attention in China.%通过对ScienceDirect和中国知网CNKI两大数据库进行检索和分类统计,了解近年来消防科研的研究热点及其变化情况,分析消防行业科研的发展趋势.统计结果表明,近年来国内外消防领域文献数量呈增长态势,国内增幅高于国外;国内研究集中在灭火系统设计、灭火指挥与救援和灭火剂与阻燃材料;国外研究集中在消防管理、火灾调查等方面.

  14. Synthesis of Uranium nitride powders using metal uranium powders

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jae Ho; Kim, Dong Joo; Oh, Jang Soo; Rhee, Young Woo; Kim, Jong Hun; Kim, Keon Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-10-15

    Uranium nitride (UN) is a potential fuel material for advanced nuclear reactors because of their high fuel density, high thermal conductivity, high melting temperature, and considerable breeding capability in LWRs. Uranium nitride powders can be fabricated by a carbothermic reduction of the oxide powders, or the nitriding of metal uranium. The carbothermic reduction has an advantage in the production of fine powders. However it has many drawbacks such as an inevitable engagement of impurities, process burden, and difficulties in reusing of expensive N{sup 15} gas. Manufacturing concerns issued in the carbothermic reduction process can be solved by changing the starting materials from oxide powder to metals. However, in nitriding process of metal, it is difficult to obtain fine nitride powders because metal uranium is usually fabricated in the form of bulk ingots. In this study, a simple reaction method was tested to fabricate uranium nitride powders directly from uranium metal powders. We fabricated uranium metal spherical powder and flake using a centrifugal atomization method. The nitride powders were obtained by thermal treating those metal particles under nitrogen containing gas. We investigated the phase and morphology evolutions of powders during the nitriding process. A phase analysis of nitride powders was also a part of the present work.

  15. Fundamentals of Fire Phenomena

    DEFF Research Database (Denmark)

    Quintiere, James

    Understanding fire dynamics and combustion is essential in fire safety engineering and in fire science curricula. Engineers and students involved in fire protection, safety and investigation need to know and predict how fire behaves to be able to implement adequate safety measures and hazard...... analyses. Fire phenomena encompass everything about the scientific principles behind fire behaviour. Combining the principles of chemistry, physics, heat and mass transfer, and fluid dynamics necessary to understand the fundamentals of fire phenomena, this book integrates the subject into a clear...... discipline. It covers thermo chemistry including mixtures and chemical reactions; Introduces combustion to the fire protection student; Discusses premixed flames and spontaneous ignition; Presents conservation laws for control volumes, including the effects of fire; Describes the theoretical bases...

  16. Powder detergents production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for powder detergent production plant, using technology developed in the IGPC laboratories, in 1998. - 2000. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects, a production plant with a capacity of 25,000 t/y was manufactured, at "Delta In", Zrenjanin, in 2000.This technology was an innovation, because new approach in mixing a powder materials was used, as well as introducing a new type of dryer in detergent production. The product meets all quality demands for detergents with high specific weight (1000 g/l, as well as environmental regulations. The detergent production process is fully automatized, and the product has uniform quality. There is no waste material in detergent zeolite production, because all products with unsatisfactory quality are returned to the process. The production process can be controlled manually, which is necessary during start-up, and repairs.

  17. Dispersing powders in liquids

    CERN Document Server

    Nelson, RD

    1988-01-01

    This book provides powder technologists with laboratory procedures for selecting dispersing agents and preparing stable dispersions that can then be used in particle size characterization instruments. Its broader goal is to introduce industrial chemists and engineers to the phenomena, terminology, physical principles, and chemical considerations involved in preparing and handling dispersions on a commercial scale. The book introduces novices to: - industrial problems due to improper degree of dispersion; - the nomenclature used in describing particles; - the basic physica

  18. Fire-Walking

    Science.gov (United States)

    Willey, David

    2010-01-01

    This article gives a brief history of fire-walking and then deals with the physics behind fire-walking. The author has performed approximately 50 fire-walks, took the data for the world's hottest fire-walk and was, at one time, a world record holder for the longest fire-walk (www.dwilley.com/HDATLTW/Record_Making_Firewalks.html). He currently…

  19. Fire-Walking

    Science.gov (United States)

    Willey, David

    2010-01-01

    This article gives a brief history of fire-walking and then deals with the physics behind fire-walking. The author has performed approximately 50 fire-walks, took the data for the world's hottest fire-walk and was, at one time, a world record holder for the longest fire-walk (www.dwilley.com/HDATLTW/Record_Making_Firewalks.html). He currently…

  20. Fire Safety Analysis of the Polar Icebreaker Replacement Design. Volume 2

    Science.gov (United States)

    1987-10-01

    stove was last used at 0130. An omelet pan isn’t that large, therefore, it could not hold much grease. 0530 15 The fire was detected when the...watchstander entered the galley and observed smoke and flames coming from the omelet pan on the galley stove . He attempted to extinguish the flames by throwing...phenomena appears to be the result 1 of Tanaka’s combustion algorithm (how much of the gasified fuel will actually be burned); the model predicts a zero

  1. 森林火灾应急扑救中航空飞机装备的种类及技术%Type of Aviation Aircraft Equipment and Technology for Forest Fire Emergency Suppression

    Institute of Scientific and Technical Information of China (English)

    高仲亮; 王秋华; 舒立福; 张明远

    2014-01-01

    As an important part of forest fire monitoring and fighting,aviation aircraft consist of fixed-wing aircraft and heli-copters. They attack fast and flexibly,without terrain restrictions,and can realize airborne command,aircraft landing for fire suppression,line-down fire suppression, chemical-based fire suppression,bucket fire suppression,artificial precipitation and fire suppression during glide. In view of such disadvantags as the restrictions involved in the implementation of aerial fire sup-pression,low utilization rate of water and low efficiency of fire suppression, and such advantages as water-based fire suppres-sion and the low cost,safety and environmental protection features of water,it is proposed that water is the best fire extin-guishing agent and water mist is the best way of fire extinctio. Improvement of the utilization rate of water-based fire extinc-tion,research and development of water mist-based fire extinguishing system and new types of airborne water mist fire extin-guishing bombs to exert their superiority in forest fire fighting will be the development direction of aerial fire suppression.%航空飞机是监测和扑救森林火灾的重要组成部分,分为固定翼机和直升机。航空飞机具有出击迅速、机动灵活、不受地形限制等优点,能进行空中指挥、机降灭火、索降灭火、化学灭火、吊桶灭火以及人工增雨和滑降灭火等作业。针对航空灭火水利用率和灭火效率低的缺点,以及水灭火的优越性和水的廉价、安全环保特性,提出水是最好的灭火剂,细水雾是其最佳的作用方式。提高水灭火的利用率、研发细水雾灭火系统和新型机载细水雾灭火弹,发挥其扑救森林火灾的优越性,将是航空灭火的发展方向。

  2. Fire fatality study: demographics of fire victims.

    Science.gov (United States)

    Barillo, D J; Goode, R

    1996-03-01

    Injury or death caused by fire is frequent and largely preventable. This study was undertaken to define the populations, locations, times and behaviours associated with fatal fires. Seven hundred and twenty-seven fatalities occurring within the State of New Jersey, between the years 1985 and 1991, were examined retrospectively. Most deaths were attributed to a combination of smoke inhalation and burn injury. Five hundred and seventy-four fatalities occurred in residential fires. Smoking materials were the most common source of ignition for residential fires. More than half of the fatal residential fires started between the hours of 11 p.m. and 7 a.m. Children and the elderly represented a disproportionate percentage of fire victims. Victims under the age of 11 years or over the age of 70 years constituted 22.1 per cent of the state population but 39.5 per cent of all fire fatalities. Fire-prevention efforts should target home fire safety, and should concentrate on children and the elderly. The development of fire-safe smoking materials should be encouraged.

  3. The Effects of Context Changes on the Reinstatement of Extinguished Conditioned Behavior in a Conditioned Suppression Task with Humans

    Science.gov (United States)

    Neumann, David L.

    2008-01-01

    Reinstatement refers to the return of previously extinguished conditioned responses to test trials of a conditional stimulus (CS) when presentations of the unconditional stimulus (US) alone are given following extinction. Four experiments were conducted to determine whether reinstatement could be found in a conditioned suppression task with humans…

  4. Effects of Multiple Contexts and Context Similarity on the Renewal of Extinguished Conditioned Behaviour in an ABA Design with Humans

    Science.gov (United States)

    Balooch, Siavash Bandarian; Neumann, David L.

    2011-01-01

    The ABA renewal procedure involves pairing a conditional stimulus (CS) and an unconditional stimulus (US) in one context (A), presenting extinction trials of the CS alone in a second context (B), and nonreinforced test trials of the CS in the acquisition context (A). The renewal of extinguished conditioned behaviour is observed during test. The…

  5. Environmental contamination by perfluorinated carboxylates and sulfonates following the use of fire-fighting foam in Tomakomai, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Nobuyoshi; Taniyasu, Sachi; Horii, Yuichi; Hanari, Nobuyasu; Okazawa, Tsuyoshi [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Kannan, K. [Wadsworth Center, New York State Department of Health, Albany, NY (United States); Petrick, G. [Kiel Univ. (Germany). Inst. for Marine Research

    2004-09-15

    On September 26, 2003, a magnitude (M) 8.3 offshore earthquake struck Hokkaido, Japan. The earthquake and ensuing tsunami injured hundreds of people and resulted in significant damage to port and coastal communities. Immediately following the earthquake, a major fire occurred at an oil storage facility of a refinery (Idematsu Kosan Company Ltd) located in the west part of Tomakomai, a Pacific coast city in southern Hokkaido. Idemitsu Kosan Company is the second largest oil refinery in Japan, with a capacity of 140,000 barrels per day (bpd) in Tomakomai. Forty five of the 105 oil storage tanks were damaged following the earthquake and resulted in release of petroleum naphtha, which ignited accidentally. The first fire was reported immediately after the earthquake on 26 September 2003 and was extinguished after 7 hours. The second fire occurred on 28 September and lasted for 44 h. More than three hundred fireman and about one hundred fire engines were brought from several prefectures by air carriers to extinguish the fire. More than 130,000 L of fire fighting foams (FFF) was delivered to extinguish these fires and at least 40,000 L was used. Detailed information regarding the type of FFF used was not available, but aqueous film forming foams (AFFF) have been used in the control of fuel-related fires. Perfluorooctane sulfonate (PFOS) and related perfluorinated acids are a component of AFFF. The issue of environmental pollution by perfluorinated compounds (PFCs) including perfluorinated carboxylates and sulfonates has received much attention in the last four years. PFCs possess unique physicochemical properties and exhibit a wide range of volatility/ water solubility depending on the functional group. Environmental dynamics of PFCs is complex due to their unique characteristics and to their release from multitude of sources with various compositions. Previous studies have reported on environmental contamination by PFCs due to accidental release of AFFF. Large amount of

  6. FIRES: Fire Information Retrieval and Evaluation System - A program for fire danger rating analysis

    Science.gov (United States)

    Patricia L. Andrews; Larry S. Bradshaw

    1997-01-01

    A computer program, FIRES: Fire Information Retrieval and Evaluation System, provides methods for evaluating the performance of fire danger rating indexes. The relationship between fire danger indexes and historical fire occurrence and size is examined through logistic regression and percentiles. Historical seasonal trends of fire danger and fire occurrence can be...

  7. Characterization of the MgO nano powder synthesized by using a liquid phase precursor method for plasma display panels protecting layer.

    Science.gov (United States)

    Jungo, C H; Lee, J Y; Yoon, D H

    2012-02-01

    The characterization of MgO nano powders that were synthesized using a conventional firing liquid phase precursor, rapid firing liquid phase precursor and rapid cooling firing liquid phase precursor were investigated as a function of the heating and cooling rates and the concentration of the impregnated Mg(NO3)2 x 6H2O solution from 1 to 20%. The relative intensity of diffraction peak in the MgO nano powder increased with increasing firing temperature from 800 to 1200 degrees C, indicating a higher crystalline MgO nano powder. In addition, the relative intensities of the MgO nano powder synthesized at the designated temperature showed similar behavior regardless of the impregnated Mg(NO3)2 x 6H2O solution concentration from the XRD analysis. The field emission scanning electron microscope and high resolution transmission electron microscope analysis showed that the size and shape of the MgO nano powder can be controlled by the temperature, the firing and cooling processes, and the impregnated Mg(NO3)2 x 6H2O solution concentration. Moreover, the CL spectra of the synthesized MgO nano powders showed a higher luminance efficiency than commercial MgO nano powder.

  8. Assessment of exposure to carbon monoxide group of firefighters from fire fighting and rescue units

    Directory of Open Access Journals (Sweden)

    Jadwiga Lembas-Bogaczyk

    2011-03-01

    Full Text Available Firemen threat during fire burning of chemical substances indicated presence of carbon monoxide (CO in all cases. Carbon monoxide causes death of fire. Inhaled through respiratory system, links with hemoglobin, thus blocking transport and distribution of oxygen in the body. This leads to tissue anoxia, which is a direct threat to firefighters’ life. The purpose of this study was to assess the exposure to carbon monoxide of participating firefighters extinguishing fire. Estimation of carbon monoxide quantity absorbed by firefighters was isolated in a group of 40 firefighters from Fire Extinguishing and Rescue Unit of State Fire in Nysa. The study was conducted by measuring carbon monoxide in exhaled air. For measurement of carbon monoxide concentration in exhaled air Micro CO meter was used. Results were demonstrated separately for nonsmokers (n425 and smokers (n415. Mean COHb[%] levels in nonsmokers, measured prior the rescue action was 0,3950,3% and increased statistically significant after the action to 0,6150,34%, while in the group smokers, this level was 2,1750,64% before the action and increased insignificantly after the action to 2,3350,63%. The average COHb level in the same groups before and after exercise, was respectively: for nonsmokers prior to exercise was 0,4850,28% and after exercise decreased statistically significant to 0,3050,27%. In the group of smokers before exercise was 2,2350,61% and decreased statistically significant up to 1,5450,71%. It was no difference between the group of age and time of employment.

  9. Low Temperature Powder Coating

    Science.gov (United States)

    2011-02-09

    of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) • Legacy primers contain hexavalent chrome • Conventional powder coatings...panels • Third panel exhibited a single filament extending slightly beyond allowable tolerance Filiform Corrosion Resistance LTCPC on 2024 T-3 Clad ...LTCPC on 2024 T-3 Clad O G D E N A I R L O G I S T I C S C E N T E R BE AMERICA’S BEST JTP Results • LTCPC performance similar or better than wet

  10. Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders

    Directory of Open Access Journals (Sweden)

    Msheer Hasan Ali

    2017-04-01

    Full Text Available In this article, the efficiency of waste glass powder was investigated in enhancing the mechanical properties of concrete at high temperature. Chemical composition of this powder reveals that it plays good role as effective inert very fine material in concrete strength improvement. Conventional reactive pozzolanic powder of silica fume was used also in present work to show the degradation degree in concrete strength under firing in comparison to concrete made with waste glass powder. The experimental program was comprised of tests for examining fire resistance and mechanical properties of high strength concrete (HSC after firing. Fifty-six concrete cylinders and prisms were manufactured for measuring their compressive and flexural strengths, modulus of elasticity and stress-strain behavior at high temperature. Failure modes were considered also for the specimens after fire exposure. Results demonstrate the great role of waste glass powder in conserving residual strength at high temperature. Accordingly, it is proved that the HSC made with waste glass powder has strength at high temperature more than that for concrete fabricated by silica fume.

  11. Design and Implement of Fire Robot Based on ARM%基于ARM消防机器人的设计与实现

    Institute of Scientific and Technical Information of China (English)

    李颖; 李祥林; 马宏锋

    2012-01-01

    According to sensitive situations of fire,the fire robot has been designed and implemented.ARM2440 is the core control board of robot,which measures distance through the ultrasonic,uses infrared to avoid obstacles,adopts image to identify fire source or tinder,confirms fire positon,carries out the operation of fire detection,photograph,alarm,approach to fire source so as to extinguish the fire.The fire robot completes detection,alarm and fire operation before fire risk,with good reliability and real-time.%针对火种比较敏感的场合,设计并实现了一种智能消防机器人.该机器人以ARM2440为核心控制板,通过超声波测距,红外线避障,采用图像识别火源或火种,确定火灾方位,完成火源探测、拍照、报警,并接近火源,实现灭火操作.消防机器人在火险过程的前三分之二阶段内完成从探测、报警到灭火的操作,具有良好的可靠性和实时性.

  12. Fire fighting at longwall face 67 of the Stara Jama brown coal mine in Zenica

    Energy Technology Data Exchange (ETDEWEB)

    Elezovic, V.; Bijelic, V.; Slijepcevic, S.

    1984-10-01

    A case is described of fire fighting at a 100 m long fully mechanized longwall. The fire occurred in the upper end of the longwall working a 9 m thick foot slice of a 18 m thick coal seam, i.e. beneath the goaf of the roof slice which had been outmined by the same sublevel working method. The mine fire was detected by the presence of CO in the outlet stream of mine air. Operation of the longwall was continued without interruption. The longwall crew worked using respirators. In order to extinguish the fire in the goaf, the suction type ventilation for the longwall (495 m/sup 3//min) was substituted by compressive ventilation. Two blowers were used for this purpose (2x250 m/sup 3//min). The pressure of mine air prevented the outflow of CO and enabled operations at the longwall to be continued without interruption. Fire fighting lasted nearly 2 months. A 50 m long zone, endangered by the fire, was outmined.

  13. Combustion velocity of coal in seat of an underground fire

    Energy Technology Data Exchange (ETDEWEB)

    Yanchenko, G.A.; Kuzyaev, L.S.; Serra-Suares, L.Kh.

    1988-02-01

    Using the example of an underground fire in a very long coal channel, analyzes the processes of energy interchange between the gas phase and the coal surface in the channel and explains that calculations to assess the duration of burning (and hence assist in extinguishing or containing the fire) need to be able to account for the speed of transition of the coal from the solid phase (burning mass) to the gaseous phase in conditions of oxygen (in the form of products of complete combustion), reduction and dry distillation (in the form of products of incomplete combustion). Demonstrates in formulaic form the correlation between the mass velocity of the coal burning, the volume velocity of the arrival of air at the seat of the fire, the excess oxidant coefficient and the volume of air which is theoretically required to completely burn 1 kg of coal and presents the coefficients of excess oxygen and a generalized, statistical coefficient averaged for eight basic coal groups in tabular form. 1 ref.

  14. Smoking and Home Fire Safety

    Science.gov (United States)

    ... Materials Working with the Media Fire Protection Technology Smoking fire safety outreach materials As a member of ... Electronic Cigarette Explosions and Fires: The 2015 Experience Smoking fire safety messages to share It is important ...

  15. Campus Fire Safety Today.

    Science.gov (United States)

    Thompson, Mike

    2001-01-01

    Reviews information on recent college and university dormitory fire fatalities, and highlights five examples of building features reported to be major contributing factors in residence-hall fires. Explains how public awareness and expectations are affecting school dormitory safety. (GR)

  16. Fire Stations - 2007

    Data.gov (United States)

    Kansas Data Access and Support Center — Fire Station Locations in Kansas Any location where fire fighters are stationed at or based out of, or where equipment that such personnel use in carrying out their...

  17. Coal fires in China

    Institute of Scientific and Technical Information of China (English)

    CHE Yao(车遥); HUANG Wen-hui(黄文辉); ZHANG Ai-yun(张爱云)

    2004-01-01

    Coal fires have a very long history in China; the oldest coal fires have being burning for many million years. Up to now more than 56 coal fires spots were distinguished. They mainly locate in West-North of China, North of China and East-North of China. About millions of tons of coal have been burned in fires every year. Xinjiang Autonomy is the most serious region in coal fires as it has 38 coal fires spots and about 6.85 million tons of coal was burned every year. Coal fires in China ignited by wildfires, spontaneous combustion and human being during mining activities. These fires have released about 0.9 million tons of gasses (including CO, CO2, SO2, NO2 CH4, CO2, H2S etc.) into the atmosphere every year, most of which are brought to the east by wind and resulting more heavier air pollution in northern China.

  18. Fire Stations - 2009

    Data.gov (United States)

    Kansas Data Access and Support Center — Fire Stations in Kansas Any location where fire fighters are stationed or based out of, or where equipment that such personnel use in carrying out their jobs is...

  19. Tunnel fire dynamics

    CERN Document Server

    Ingason, Haukur; Lönnermark, Anders

    2015-01-01

    This book covers a wide range of issues in fire safety engineering in tunnels, describes the phenomena related to tunnel fire dynamics, presents state-of-the-art research, and gives detailed solutions to these major issues. Examples for calculations are provided. The aim is to significantly improve the understanding of fire safety engineering in tunnels. Chapters on fuel and ventilation control, combustion products, gas temperatures, heat fluxes, smoke stratification, visibility, tenability, design fire curves, heat release, fire suppression and detection, CFD modeling, and scaling techniques all equip readers to create their own fire safety plans for tunnels. This book should be purchased by any engineer or public official with responsibility for tunnels. It would also be of interest to many fire protection engineers as an application of evolving technical principles of fire safety.

  20. Filosofiens historiografi: Fire genrer

    DEFF Research Database (Denmark)

    Rorty, Richard

    2007-01-01

    Oversættelse af Richard Rortys artikel "Filosofiens historiografi: Fire genrer" Udgivelsesdato: 26 Oktober......Oversættelse af Richard Rortys artikel "Filosofiens historiografi: Fire genrer" Udgivelsesdato: 26 Oktober...

  1. Fires and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... Viewer (JSR 286) Actions ${title} Loading... Fires and Food Safety Fire! Few words can strike such terror. Residential ...

  2. Fundamentals of Fire Phenomena

    DEFF Research Database (Denmark)

    Quintiere, James

    discipline. It covers thermo chemistry including mixtures and chemical reactions; Introduces combustion to the fire protection student; Discusses premixed flames and spontaneous ignition; Presents conservation laws for control volumes, including the effects of fire; Describes the theoretical bases...... analyses. Fire phenomena encompass everything about the scientific principles behind fire behaviour. Combining the principles of chemistry, physics, heat and mass transfer, and fluid dynamics necessary to understand the fundamentals of fire phenomena, this book integrates the subject into a clear...... for empirical aspects of the subject of fire; Analyses ignition of liquids and the importance of evaporation including heat and mass transfer; Features the stages of fire in compartments, and the role of scale modelling in fire. The book is written by Prof. James G. Quintiere from University of Maryland...

  3. National Fire Protection Association

    Science.gov (United States)

    ... or closed List of NFPA codes & standards National Fire Codes® Subscription Service NEC® Online Subscription Free online ... Toggle this sub-menu open or closed The fire risk of exterior walls containing combustible components Resources ...

  4. Filosofiens historiografi: Fire genrer

    DEFF Research Database (Denmark)

    Rorty, Richard

    2007-01-01

    Oversættelse af Richard Rortys artikel "Filosofiens historiografi: Fire genrer" Udgivelsesdato: 26 Oktober......Oversættelse af Richard Rortys artikel "Filosofiens historiografi: Fire genrer" Udgivelsesdato: 26 Oktober...

  5. Urban Fire Risk Clustering Method Based on Fire Statistics

    Institute of Scientific and Technical Information of China (English)

    WU Lizhi; REN Aizhu

    2008-01-01

    Fire statistics and fire analysis have become important ways for us to understand the law of fire,prevent the occurrence of fire, and improve the ability to control fire. According to existing fire statistics, the weighted fire risk calculating method characterized by the number of fire occurrence, direct economic losses,and fire casualties was put forward. On the basis of this method, meanwhile having improved K-mean clus-tering arithmetic, this paper established fire dsk K-mean clustering model, which could better resolve the automatic classifying problems towards fire risk. Fire risk cluster should be classified by the absolute dis-tance of the target instead of the relative distance in the traditional cluster arithmetic. Finally, for applying the established model, this paper carded out fire risk clustering on fire statistics from January 2000 to December 2004 of Shenyang in China. This research would provide technical support for urban fire management.

  6. FIRE CHARACTERISTICS FOR ADVANCED MODELLING OF FIRES

    Directory of Open Access Journals (Sweden)

    Otto Dvořák

    2016-07-01

    Full Text Available This paper summarizes the material and fire properties of solid flammable/combustible materials /substances /products, which are used as inputs for the computer numerical fire models. At the same time it gives the test standards for their determination.

  7. Car crash fatalities associated with fire in Sweden.

    Science.gov (United States)

    Viklund, Åsa; Björnstig, Johanna; Larsson, Magnus; Björnstig, Ulf

    2013-01-01

    To study the epidemiology and causes of death in fatal car crashes on Swedish roads in which the victim's vehicle caught fire. The data set is from the Swedish Transport Administrations in-depth studies of fatal crashes 1998-2008. Autopsies from all cases provided data on injuries, toxicological analyses, and cause of death. In total, 181 people died in 133 burning cars, accounting for 5 percent of all deaths in passenger cars, sport utility vehicles, vans, and minibuses during 1998 to 2008. The cause of death for a third of the victims was fire related, as burns and/or smoke inhalation injuries, with no fatal trauma injuries. Twenty-five of these 55 deaths were persons 19 years or younger and included 15 of 18 rear seat deaths. Over half of the 181 deaths were in vehicles that had collided with another vehicle and, of these cases, half were killed in collisions with heavy vehicles. The percentage of drivers with illegal blood alcohol concentrations (27%) and suicides (5.5%) were not higher than in other fatal crashes on Swedish roads. The ignition point of the fire was indicated in only half of the cases and, of those, half started in the engine compartment and one fourth started around the fuel tank or lines. Car fires are a deadly postcrash problem. Reducing this risk would be primarily a responsibility for the automotive industry. A multifactor approach could be considered as follows: risk-reducing design, insulation, reduced flammability in motor compartment fluids and plastics, and automatic fire extinguishing equipment. Inspiration could be found in how, for example, the auto racing and aviation industries handle this problem.

  8. Defluoridation of drinking water with pottery: effect of firing temperature.

    Science.gov (United States)

    Hauge, S; Osterberg, R; Bjorvatn, K; Selvig, K A

    1994-12-01

    Excessive fluoride (F) in drinking water should be removed, but simple, inexpensive methods of fluoride removal are not readily available. This study examines the F(-)-binding capacity of clay and clayware, especially the effect of the firing temperature on the F(-)-binding process. A series of pots were made from ordinary potter's clay and fired at 500-1000 degrees C. Likewise, small clay bricks were fired and then crushed and sieved. NaF solutions containing 10 mg/l F- (10 ppm F-) were prepared. Suitable aliquots of the solutions were poured into clay pots or exposed to powdered clayware. Samples were taken at storage periods of 30 min to 20 days and analyzed for F- by ion-selective electrodes. The rate and capacity of F(-)-binding in the clayware varied with the firing temperature. Clay fired at approximately 600 degrees C was most effective. Temperatures over 700 degrees C caused a decline in F(-)-binding, and pottery fired at 900 degrees C and above seemed unable to remove F- from water. Pots fired at 500 degrees C or less cracked in water. The findings indicate that clayware, fired at an optimal temperature, may be of practical value for partial defluoridation of drinking water.

  9. 徐州汽车客运东站站房消防系统设计分析%Analysis of Fire Protection System Designing of East Automobile Passenger Station Building in Xuzhou

    Institute of Scientific and Technical Information of China (English)

    陈晓锋; 方海玲

    2012-01-01

    Fire control systems which play an important role in modern architecture engineering is the security line for people's life and property, especially in public buildings. Taking fire protection system designing of east automobile passenger station building in Xuzhou for example, this paper discusses fire control systems' matching principles in large public buildings. According to the different function intervals and space characteristics in fire control system configuration, this paper mainly introduces the setting principles and matching schemes of systems in different architectural space and functions such as water supply system of fire hydrant, sprinkler extinguishing system, fixed fire monitor extinguishing system, gas extinguishing system and automatic fire alarm system.%消防灭火系统在现代建筑工程中的作用至关重要,尤其是在公共建筑中,它是人民群众生命和财产的保障线.以徐州汽车客运东站站房消防系统设置为例,阐述了在大型公共建筑消防系统选配原则.根据不同的功能区间和空间特点进行消防系统配置,主要介绍了消防栓给水、自动喷水灭火、固定消防炮灭火、气体灭火及火灾的自动报警等系统在不同建筑空间和功能中的设置原则及其选配方案.

  10. Fire as Technology

    Science.gov (United States)

    Rudolph, Robert N.

    2011-01-01

    In this article, the author describes a project that deals with fire production as an aspect of technology. The project challenges students to be survivors in a five-day classroom activity. Students research various materials and methods to produce fire without the use of matches or other modern combustion devices, then must create "fire" to keep…

  11. Fire and fuels

    Science.gov (United States)

    Brandon Collins; Carl Skinner

    2014-01-01

    Recent studies of historical fire regimes indicate that fires occurring prior to Euro-American settlement were characterized by a high degree of spatial complexity that was driven by heterogeneity in vegetation/fuels and topography and influenced by variability in climate, which mediated the timing, effects, and extents of fires over time. Although there are many...

  12. Fire Department Emergency Response

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A. [Westinghouse Savannah River Company, AIKEN, SC (United States); Bell, K.; Kelly, J.; Hudson, J.

    1997-09-01

    In 1995 the SRS Fire Department published the initial Operations Basis Document (OBD). This document was one of the first of its kind in the DOE complex and was widely distributed and reviewed. This plan described a multi-mission Fire Department which provided fire, emergency medical, hazardous material spill, and technical rescue services.

  13. Autonomous Forest Fire Detection

    NARCIS (Netherlands)

    Breejen, E. den; Breuers, M.; Cremer, F.; Kemp, R.A.W.; Roos, M.; Schutte, K.; Vries, J.S. de

    1998-01-01

    Forest fire detection is a very important issue in the pre-suppression process. Timely detection allows the suppression units to reach the fire in its initial stages and this will reduce the suppression costs considerably. The autonomous forest fire detection principle is based on temporal contrast

  14. Fire as Technology

    Science.gov (United States)

    Rudolph, Robert N.

    2011-01-01

    In this article, the author describes a project that deals with fire production as an aspect of technology. The project challenges students to be survivors in a five-day classroom activity. Students research various materials and methods to produce fire without the use of matches or other modern combustion devices, then must create "fire" to keep…

  15. Vulnerability Methodology and Protective Measures for Aircraft Fire and Explosion Hazards. Volume 2. Aircraft Engine Nacelle Fire Test Programs. Part 1. Fire Detection, Fire Extinguishment and Surface Ignition Studies

    Science.gov (United States)

    1986-01-01

    up to 1500°F can be simulated at flowrates up to 1 pound per second. To conserve bottle farm high-pressure air, shop air is used during the start...ff* K» CO (r> « ct.’** coff *r**o’^ar)cym*e>i’jco^oc4tro’j’^-*K^(7*^tfioo^(r-*«’ oooo(rcr^(rc7^as9Qoo7*so^o^aoa3®coo^co(UQaa>a9^aiAAa3p^r**’r

  16. Method of manufacturing powder particles

    NARCIS (Netherlands)

    Borra, J.P.D.

    2002-01-01

    The invention relates to a method of manufacturing a dry powder particle, preferably using electro-hydrodynamic spraying, wherein two oppositely charged aerosol streams are contacted. The invention allows for the manufacture of powders having various, controllable compositions and shapes. In

  17. Method of manufacturing powder particles

    NARCIS (Netherlands)

    Borra, J.P.D.

    2002-01-01

    The invention relates to a method of manufacturing a dry powder particle, preferably using electro-hydrodynamic spraying, wherein two oppositely charged aerosol streams are contacted. The invention allows for the manufacture of powders having various, controllable compositions and shapes. In particu

  18. CHINESE RE POLISHING POWDER INDUSTRY

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Due to its high polishing efficiency, long working life and wide application range, RE polishing powder has become the most popular fine polishing material. In recent years, accompanying the rapid development of electronic information technology, the demand for polishing powder is

  19. Fire Protection Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  20. A Case Study on the Rehabilitation of a Fire-Damaged Structure

    Directory of Open Access Journals (Sweden)

    Taehun Ha

    2016-05-01

    Full Text Available This paper presents a case study on the rehabilitation of a fire-damaged structure and describes the results of a site investigation and tests, leading to a plan for the rehabilitation of the structure. The fire took place in the main control room of a thermal power plant and lasted about three hours until it was finally extinguished. To set up a rehabilitation plan for the damaged structure, a visual inspection of the damaged condition was first carried out, which was followed by analysis and on-site material tests indicating the degree of neutralization progress in the remaining structure. Specimens of damaged concrete and reinforcing bars were sampled and tested for their residual strengths. As a conclusion, two methods of rehabilitation were suggested considering the current condition of the structure and the sequence of construction.

  1. Expert meeting with the Belgoprocess Inc. on the fire and explosion accident of the asphalt solidification facility. Search and investigation on cause elucidation and reoccurrence control for the fire and explosion accident of the asphalt solidification facility. A visiting report on abroad

    Energy Technology Data Exchange (ETDEWEB)

    Funasaka, Hideyuki; Fujita, Hideto; Nakamura, Hirofumi; Koyama, Tomozo

    1997-11-01

    In order to investigate in detail on fire cause materials, test results of thermal analysis on waste liquids, and flow of affairs relating to the fire accident (15th December, 1981) of the Euro Bitum Plant (an asphalt solidification facility of the middle level wastes) settled at the Eurochemic reprocessing work in the Kingdom of Belgium, resemble to the present accident, 4 members of the Cause Elucidation Group and Mr. Kaneko, director of the Paris Office of PNC visited to Belgium to hold a meeting with experts of the Belgoprocess Inc. for 4 days. In this meeting, after exchanging mutual detail informations on accident occurred at the Euro Bitum Plant and fire and explosion accident of the asphalt solidification facility, some discussions on cause supposition of the present accident. For cause of the fire, mutual differences were found. As a state at occurring fires was much resemble, their followed states seemed to be extremely different on responses of operators to fire-extinguishing action, filter exchanging and so forth. As finishing to recover the plant after 1 month passed from the accident to restart its operation, the Belgoprocess, Inc. has conducted some improvements of the facility such as sufficiency of fire extinguishing apparatus, addition and improvements of fire detecting means, direct measurement of solid temperature and so on, as well as reinforcement of thermal analysis procedure and renewal to new apparatus. Although no special supposition on cause of the fire at this meeting, a lot of items to learn such as operation system, responses after accident, and so forth were acquired. (G.K.)

  2. Investigation of the Extinguishing Features for Liquid Fuels and Organic Flammable Liquids Atomized by a Water Flow

    Directory of Open Access Journals (Sweden)

    Voytkov Ivan V.

    2016-01-01

    Full Text Available The processes of heat and mass transfer were investigated experimentally while moving and evaporating the atomized water flow in high-temperature combustion products of typical liquid fuels and organic flammable liquids: gasoline, kerosene, acetone, crude oil, industrial alcohol. We determined typical periods of liquid extinguishing by an atomized water flow of various dispersability. Data of the discharge of extinguishing medium corresponding to various parameters of atomization and duration of using the atomization devices was presented. It is shown that Um≈3.5 m/s is a minimal outflow velocity of droplets during moving while passing the distance of 1m in the high-temperature gas medium to stop the combustion of organic liquids.

  3. Analysis of Existing Problems in the Design of Fire-fighting of Petrochemical Enterprises%石油化工企业消防设计中存在的问题分析

    Institute of Scientific and Technical Information of China (English)

    李洪; 彭国祥; 余春和

    2015-01-01

    This paper analyzes the major existing problems in the design of the hydrant system, fire monitor system, foam fire-fighting system and gas fire extinguishing system of petrochemical enterprises and addresses substitute solutions to the zoning and decompression of indoor hydrant system. This pa-per also provides suggestions to the taper pipe thread nozzle, vent valve and control of foam fire-fighting system. The authors of this paper also provide per-sonal comments about the controversial issues in the design of gas fire extinguishing system for reference to fire-fighting designers.%针对石油化工企业消火栓系统、消防炮系统、泡沫灭火系统及气体灭火系统设计中存在的主要问题进行了分析,对室内消火栓系统的分区和减压提出了替代的做法,并就泡沫灭火系统中管牙接口、排气阀及系统的控制给出了建议,同时对气体灭火系统设计中存在的争议提出了个人观点,为消防专业设计人员提供了一定的参考。

  4. Powder-Bed Stabilization for Powder-Based Additive Manufacturing

    Directory of Open Access Journals (Sweden)

    Andrea Zocca

    2014-06-01

    Full Text Available The most successful additive manufacturing (AM technologies are based on thelayer-by-layer depositionof a flowable powder. Although considered as the third industrial revolution, one factor still limiting these processes to become completely autonomous is the often necessary build-up of support structures. Besides the prevention of lateral shifts of the part during the deposition of layers, the support assures quality and stability to the built process. The loose powder itself surrounding the built object, or so-called powder-bed, does not provide this sustenance in most existent technology available. Here we present a simple but effective and economical method for stabilizing the powder-bed, preventing distortions in the geometry with no need for support structures. This effect, achieved by applying an air flow through the powder-bed, is enabling an entirely autonomous generation of parts and is a major contribution to all powder-based additive manufacturing technologies. Moreover, it makes powder-based AM independent of gravitational forces, which will facilitate crafting items in space from a variety of powdery materials.

  5. Fire risk in California

    Science.gov (United States)

    Peterson, Seth Howard

    Fire is an integral part of ecosystems in the western United States. Decades of fire suppression have led to (unnaturally) large accumulations of fuel in some forest communities, such as the lower elevation forests of the Sierra Nevada. Urban sprawl into fire prone chaparral vegetation in southern California has put human lives at risk and the decreased fire return intervals have put the vegetation community at risk of type conversion. This research examines the factors affecting fire risk in two of the dominant landscapes in the state of California, chaparral and inland coniferous forests. Live fuel moisture (LFM) is important for fire ignition, spread rate, and intensity in chaparral. LFM maps were generated for Los Angeles County by developing and then inverting robust cross-validated regression equations from time series field data and vegetation indices (VIs) and phenological metrics from MODIS data. Fire fuels, including understory fuels which are not visible to remote sensing instruments, were mapped in Yosemite National Park using the random forests decision tree algorithm and climatic, topographic, remotely sensed, and fire history variables. Combining the disparate data sources served to improve classification accuracies. The models were inverted to produce maps of fuel models and fuel amounts, and these showed that fire fuel amounts are highest in the low elevation forests that have been most affected by fire suppression impacting the natural fire regime. Wildland fires in chaparral commonly burn in late summer or fall when LFM is near its annual low, however, the Jesusita Fire burned in early May of 2009, when LFM was still relatively high. The HFire fire spread model was used to simulate the growth of the Jesusita Fire using LFM maps derived from imagery acquired at the time of the fire and imagery acquired in late August to determine how much different the fire would have been if it had occurred later in the year. Simulated fires were 1.5 times larger

  6. Eliminating persistent fires on a large area in the zone of delimiting quarry fields of Merkur-Brezno. [Czechoslovakia

    Energy Technology Data Exchange (ETDEWEB)

    Stuchlik, R.; Schicker, J.

    1982-01-01

    Lignite in the North Czech Basin (CSSR) has a tendency to spontaneous combustion. Favorable conditions for spontaneous combustion and fires are created because of accumulation of coal fines. Usually the site of ignition is sprinkled with rock, mainly clay rocks of the overhanging side. Within several days, a fire develops through the layer of these rocks and spreads further. Despite this, in the majority of cases attempts are made to again eliminate the fire by sprinkling the next layer of clay materials. Thus persistent fires develop which can no longer be eliminated by standard resources. A characteristic example is a fire that has persisted in a large area on the boundary of two quarries Merkur and Brezno. This section has not been worked since 1970. Underground mining in this area was previously not done. Measures to eliminate fires initially were taken only when the fire covered practically the entire front of extraction work. The area spread of the fire was promoted by the fact that the clay rocks of the overhanging side contain fuel shales. On an area of length 300 m and height 12-15 m, an oblique ledge was made which was then sprinkled with a layer of clay rocks of the overhanging side. This fostered expansion of the fire. In order to eliminate the fire, continuous method of extinguishing was used which stipulates cooling of the rock at the site of combustion and subsequent removal of them. The process continued until cooling of the rock below 30/sup 0/C. Cooling was done using tangential sprayers, injection wells and by filling the well with carbon dioxide. Elimination of the fire lasted 14 weeks. The excavator DN-101 and bulldozers DT-250 were used to eliminate the cooled rocks.

  7. A research on coalfield fire detection in Daliuta mining area at Inner Mongolia based on hyperspectral thermal infrared remote sensing

    Science.gov (United States)

    Yang, Guo-fang; Zhou, Jia-jing; Tian, Xin-guang

    2016-10-01

    Daliuta mining coal fires at Inner Mongolia were not reported at present in remote sensing. However, they still pose a serious threat to the surroundings. In order to extract combustion range of the coal mine, we used the wintertime thermal airborne infrared hyperspectral images of TASI acquired in 2016 to detect the coal fire of Daliuta mining. The synchronous in situ measured temperature was used to establish space-to-ground regression equation with the image temperature for retrieving land surface temperature. Extracted coal fire through the reasonable threshold by the processed image data, identified a region where the surface temperatures was -0.5°C to 300°C. MODTRAN4 code was used to estimate the upward and downward radiation and transmission of the atmosphere. On this basis, the non-coal fire anomaly areas, such as the cooling water of power plant, heat buildings, chimney, were separated from the coal fire heat anomaly areas by the characteristic difference of the emissivity spectrum in the objectives. The results show that the bands 1-16 of TASI are suitable for infrared inversion temperature for the coalfield fire. There was a linear relationship between synchronous in situ observation temperature and the image temperature, and the determination coefficient R2 was 0.9938. The extracted coal fire anomaly range is able to provide some decision support for underground coal fire extinguishing. A detailed fire map of shallow coal areas can help to prioritize fire fighting operations in order to avoid the chance of starting a new coal fire.

  8. 某立式可燃液体储罐区消防灭火及冷却用水系统的设计%The Design Specification of Extinguishing System and Cooling Water System for Vertical Flammable Liquid Storage Tank Farm

    Institute of Scientific and Technical Information of China (English)

    王伟

    2012-01-01

    According to relative code and owner requirements, the flammable liquid storage tank farm including fixed type fire fighting cooling water system and low expansion foam extinguishing system, foam pressure proportioning tank parameter of design is based on actual market equipment parameter. Contrast circle ring cooling water pipe layout proposal to reduce fire fighting water consumption, avoid use design parameter result in fire fighting water storage volume less than actual fire fighting water consumption.%根据相关规范和业主要求,某立式可燃液体罐区采用固定式消防冷却水系统和低倍数泡沫灭火系统相结合的灭火系统。本设计通过对市场上实际灭火设备参数的选取,确定了泡沫比例混合装置的参数:并通过对罐区环状消防冷却水管分区布管的比较,选择最优的布管方式,该布管方式不仅避免了因设计取值较小造成消防储水量的不足而且减少了消防用水量。

  9. Fire Danger and Fire Weather Records

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Weather Service (formerly Weather Bureau) and Forest Service developed a program to track meteorological conditions conducive to forest fires, resulting...

  10. Black powder in gas pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Sherik, Abdelmounam [Saudi Aramco, Dhahran (Saudi Arabia)

    2009-07-01

    Despite its common occurrence in the gas industry, black powder is a problem that is not well understood across the industry, in terms of its chemical and physical properties, source, formation, prevention or management of its impacts. In order to prevent or effectively manage the impacts of black powder, it is essential to have knowledge of its chemical and physical properties, formation mechanisms and sources. The present paper is divided into three parts. The first part of this paper is a synopsis of published literature. The second part reviews the recent laboratory and field work conducted at Saudi Aramco Research and Development Center to determine the compositions, properties, sources and formation mechanisms of black powder in gas transmission systems. Microhardness, nano-indentation, X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM) techniques were used to analyze a large number of black powder samples collected from the field. Our findings showed that black powder is generated inside pipelines due to internal corrosion and that the composition of black powder is dependent on the composition of transported gas. The final part presents a summary and brief discussion of various black powder management methods. (author)

  11. Extinguishment of a Diffusion Flame Over a PMMA Cylinder by Depressurization in Reduced-Gravity

    Science.gov (United States)

    Goldmeer, Jeffrey Scott

    1996-01-01

    Extinction of a diffusion flame burning over horizontal PMMA (Polymethyl methacrylate) cylinders in low-gravity was examined experimentally and via numerical simulations. Low-gravity conditions were obtained using the NASA Lewis Research Center's reduced-gravity aircraft. The effects of velocity and pressure on the visible flame were examined. The flammability of the burning solid was examined as a function of pressure and the solid-phase centerline temperature. As the solid temperature increased, the extinction pressure decreased, and with a centerline temperature of 525 K, the flame was sustained to 0.1 atmospheres before extinguishing. The numerical simulation iteratively coupled a two-dimensional quasi-steady, gas-phase model with a transient solid-phase model which included conductive heat transfer and surface regression. This model employed an energy balance at the gas/solid interface that included the energy conducted by the gas-phase to the gas/solid interface, Arrhenius pyrolysis kinetics, surface radiation, and the energy conducted into the solid. The ratio of the solid and gas-phase conductive fluxes Phi was a boundary condition for the gas-phase model at the solid-surface. Initial simulations modeled conditions similar to the low-gravity experiments and predicted low-pressure extinction limits consistent with the experimental limits. Other simulations examined the effects of velocity, depressurization rate and Phi on extinction.

  12. Pharmacogenetic reactivation of the original engram evokes an extinguished fear memory.

    Science.gov (United States)

    Yoshii, Takahiro; Hosokawa, Hiroshi; Matsuo, Naoki

    2017-02-01

    Fear memory extinction has several characteristic behavioral features, such as spontaneous recovery, renewal, and reinstatement, suggesting that extinction training does not erase the original association between the conditioned stimulus (CS) and the unconditioned stimulus (US). However, it is unclear whether reactivation of the original physical record of memory (i.e., memory trace) is sufficient to produce conditioned fear response after extinction. Here, we performed pharmacogenetic neuronal activation using transgenic mice expressing hM3Dq DREADD (designer receptor exclusively activated by designer drug) under the control of the activity-dependent c-fos gene promoter. Neuronal ensembles activated during fear-conditioned learning were tagged with hM3Dq and subsequently reactivated after extinction training. The mice exhibited significant freezing, even when the fear memory was no longer triggered by external CS, indicating that the artificial reactivation of a specific neuronal ensemble was sufficient to evoke the extinguished fear response. This freezing was not observed in non-fear-conditioned mice expressing hM3dq in the same brain areas. These results directly demonstrated that at least part of the original fear memory trace remains after extinction, and such residual plasticity might reflect the persistent memory. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Fire retardants for wood

    Directory of Open Access Journals (Sweden)

    Vlatka Jirouš-Rajković

    2009-06-01

    Full Text Available Along with many advantages, wood as traditional building material also has some disadvantages. One of them is the flammability. The most usual way to improve the fire performance of wood is by treating it with fire retardants that can be applied to wood composite products during manufacture, pressure impregnated into solid wood or wood products or added as a paint or surface coating. Fire retardants are formulated to control ignition, flame spread on the wood surface and to reduce the amount of heat released from wood. Fire retardants cannot make wood non combustible. According to the European reaction-to-fire “Euroclasses”classification system for construction products, wood treated with fire retardant can meet the requirements of Euroclass B, whereas ordinary wood products typically fall into class D. This article attempts to bring together information related to the burning of wood, fire performance of wood, types of fire retardants and mechanism of fire retardancy. Fire retardant coatings and chemical impregnation by pressure-treating are described separately.

  14. Fires in Amazonia

    Science.gov (United States)

    Aragão, Luiz E. O. C.; Anderson, Liana O.; Lima, André; Arai, Egidio

    2016-11-01

    Fire has been used since the first humans arrived in Amazonia; however, it has recently become a widely used instrument for large-scale forest clearance. Patterns of fire incidence in the region have been exacerbated by recent drought events. Understanding temporal and spatial fire patterns as well as their consequences for forest structure, species composition, and the carbon cycle is critical for minimising global change impacts on Amazonian ecosystems and people. In this chapter, we provide an overview of the state of our knowledge on the spatial and temporal patterns of fire incidence in Amazonia, depicting the historical fire usage in the region, their relationship with land use and land cover, and their responses to climate seasonality and droughts. We subsequently focus on the impacts of fire, by quantifying the extent of burnt forests during major droughts and describing the main impacts on forest structure, composition, and carbon stocks. Finally, we present an overview of modelling initiatives for forecasting fire incidence in the region. We conclude by providing a comprehensive view of the processes that influence fire occurrence, potential feedbacks, and impacts in Amazonia. We also highlight how key areas within fire ecology must be improved for a better understanding of the long-term effect of fire on the Amazon forest 'biome'.

  15. Low pressure powder injection moulding of stainless steel powders

    Energy Technology Data Exchange (ETDEWEB)

    Zampieron, J.V.; Soares, J.P.; Mathias, F.; Rossi, J.L. [Powder Processing Center CCP, Inst. de Pesquisas Energeticas e Nucleares, Sao Paulo, SP (Brazil); Filho, F.A. [IPEN, Inst. de Pesquisas Energeticas e Nucleares, Cidade Univ., Sao Paulo, SP (Brazil)

    2001-07-01

    Low-pressure powder injection moulding was used to obtain AISI 316L stainless steel parts. A rheological study was undertaken using gas-atomised powders and binders. The binders used were based on carnauba wax, paraffin, low density polyethylene and microcrystalline wax. The metal powders were characterised in terms of morphology, particle size distribution and specific surface area. These results were correlated to the rheological behaviour. The mixture was injected in the shape of square bar specimens to evaluate the performance of the injection process in the green state, and after sintering. The parameters such as injection pressure, viscosity and temperature were analysed for process optimisation. The binders were thermally removed in low vacuum with the assistance of alumina powders. Debinding and sintering were performed in a single step. This procedure shortened considerably the debinding and sintering time. (orig.)

  16. (TECTONA GRANDIS LEAF POWDER

    Directory of Open Access Journals (Sweden)

    Yash Mishra

    2015-01-01

    Full Text Available In this study, the adsorption potential of Teak (Tectona grandis leaf powder (TLP toremove Methylene blue (MB and Malachite Green (MG dye molecules from aqueoussolution was investigated. Batch experiments were conducted to evaluate the influenceof operational parameters such as, pH (2−9, adsorbent dosage (1−7 g/L, contact time(15−150 minutes and initial dye concentration (20−120 mg/L at stirring speed of 150rpm for the adsorption of MB and MG on TLP. Maximum removal efficiency of 98.4%and 95.1% was achieved for MB and MG dye, respectively. The experimentalequilibrium data were analysed using Langmuir, Freundlich and Temkin isothermmodels and it was found that, it fitted well to the Freundlich isotherm model. Thesurface structure and morphology of the adsorbent was characterized using scanningelectron microscopy (SEM and the presence of functional groups and its interactionwith the dye molecules were analysed using Fourier transform infrared spectroscopy(FTIR. Based on the investigation, it has been demonstrated that the teak leaf powderhas good potential for effective adsorption of methylene blue and malachite green dye.

  17. Biomass co-firing

    DEFF Research Database (Denmark)

    Yin, Chungen

    2013-01-01

    Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized-bed combus......Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized......-bed combustion (FBC) systems, and grate-firing systems, which are employed in about 50%, 40% and 10% of all the co-firing plants, respectively. Their basic principles, process technologies, advantages, and limitations are presented, followed by a brief comparison of these technologies when applied to biomass co...

  18. Biomass co-firing

    DEFF Research Database (Denmark)

    Yin, Chungen

    2013-01-01

    Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized-bed combus......Co-firing biomass with fossil fuels in existing power plants is an attractive option for significantly increasing renewable energy resource utilization and reducing CO2 emissions. This chapter mainly discusses three direct co-firing technologies: pulverized-fuel (PF) boilers, fluidized......-bed combustion (FBC) systems, and grate-firing systems, which are employed in about 50%, 40% and 10% of all the co-firing plants, respectively. Their basic principles, process technologies, advantages, and limitations are presented, followed by a brief comparison of these technologies when applied to biomass co...

  19. Synthesis of nanosized tungsten powder

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Nanosized tungsten powder was synthesized by means of different methods and under different conditions with nanosized WO3 powder. The powder and the intermediate products were characterized using XRD, SEM, TEM, BET (Brunauer Emmett Teller Procedure) and SAXS (X-ray diffracto-spectrometer/Kratky small angle scattering goniometer). The results show that nanosized WO3 can be completely reduced to WO2 at 600℃ after 40 min, and WO2 can be reduced to W at 700℃ after 90 min, moreover, the mean size of W particles is less than 40 nm. Furthermore, the process of WO3→WO2→W excelled that of WO3→W in getting stable nanosized tungsten powder with less grain size.

  20. Fire protection design criteria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  1. WebFIRE

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Factor Information Retrieval (FIRE) Data System is a database management system containing EPA's recommended emission estimation factors for criteria and...

  2. Kilns and Firing Structures

    OpenAIRE

    Nicholson, Paul

    2010-01-01

    The purpose of firing pottery is to change clay, a plastic material, into ceramic, which is aplastic. Examined here are structures designed to fire pottery or faience or to make glass (although the latter might be better described as furnaces). Firing can take place in an open, bonfire-like environment, which can also be enclosed as a firing structure. Beyond this is the development of the true kiln of which there are two main types: updraft and downdraft. The first of these is by far the mos...

  3. Fire Environment Mechanism of Lightning Fire for Daxing an Mountains

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Lightning fire is one of natural fires; its mechanism is very complex and difficult to control. Daxing'an Mountain is the main region that lightning fires occur in China. Research on lightning fires indicates that special fuel, dry-storm weather and high altitude form the lightning fire environment. Lightning fires have close relation with lights. When lightning occurs, especially dry-lightning which brings little precipitation with surface temperature growing and fuel dehydrating, these often lead to l...

  4. Fire protection countermeasures of project of biomass cogeneration%生物质热电联产项目消防对策

    Institute of Scientific and Technical Information of China (English)

    苏丹; 付永涛

    2012-01-01

    The production process and main fire disaster of straw direct combustion power generation were introduced with the example of biomass cogeneration project. The fire protection measures were put forward from the accept of production process, fire protection layout, fire separation, evacuation, au to fire extinguishing facility and fire monitoring, accord to the process characteristics and fire protection requirement, to enhance the fire safely level of combined heal and power genera-lion project.%以某生物质秸秆直接燃烧热电联产工程为例,介绍秸秆直接燃烧发电的生产工艺及主要火灾危险.针对其工艺特点和消防需求,从生产过程、消防布局、防火分隔、疏散、自动灭火设施、火灾监控等方面提出消防安全对策,提高热电联产项目的消防安全水平.

  5. School Fire Protection: Contents Count

    Science.gov (United States)

    American School and University, 1976

    1976-01-01

    The heart of a fire protection system is the sprinkler system. National Fire Protection Association (NFPA) statistics show that automatic sprinklers dramatically reduce fire damage and loss of life. (Author)

  6. National Fire News- Current Wildfires

    Science.gov (United States)

    ... 1 to 5) Current hours for the National Fire Information Center are (MST) 8:00 am - 4: ... the daily report. October 6, 2017 Minimal large fire activity was reported yesterday. Four large fires have ...

  7. 21 CFR 73.1646 - Bronze powder.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bronze powder. 73.1646 Section 73.1646 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1646 Bronze powder. (a) Identity. (1) The color additive bronze powder is a very fine metallic powder prepared from alloys consisting principally of...

  8. Ignition behavior of magnesium powder layers on a plate heated at constant temperature.

    Science.gov (United States)

    Chunmiao, Yuan; Dezheng, Huang; Chang, Li; Gang, Li

    2013-02-15

    The minimum temperature at which dust layers or deposits ignite is considered to be very important in industries where smoldering fires could occur. Experiments were conducted on the self-ignition behavior of magnesium powder layers. The estimated effective thermal conductivity k for modeling is 0.17 W m(-1)K(-1). The minimum ignition temperature (MIT) of magnesium powder layers for four different particle sizes: 6, 47, 104 and 173 μm, are also determined in these experiments. A model was developed describing temperature distribution and its change over time while considering the melting and boiling of magnesium powder. Parameter analysis shown that increasing particle size from 6 to 173 μm increased MIT from 710 to 760 K, and increased thickness of the dust layer led to a decreased MIT. The calculation termination time more than 5000 s didn't significantly impact MIT. Comparing predicted and experimental data showed satisfactory agreement for MIT of magnesium powder layers at various particle sizes. According to the ignition process of magnesium powder layer, a meaningful definition for the most sensitive ignition position (MSIP) was proposed and should be taken into consideration when preventing smoldering fires induced by hot plates.

  9. Flake tantalum powder for manufacturing electrolytic capacitors

    Institute of Scientific and Technical Information of China (English)

    HE Jilin; YANG Guoqi; PAN Luntao; LIU Hongdong; BAO Xifang

    2008-01-01

    The FTP200 flake tantalum powder was introduced.The microstructures of the powder with leaf-like primary particles having an average flakiness of 2 to 20 and porous agglomerated particles were observed.The chemical composition,physical properties,and electrical properties of the FTP200 powder were compared with those of the FTW300 nodular powder.The FTP200 powder is more sinter-resistant,and the surface area of the flake tantalum powder under sintering at high temperature has less loss than that of the nodular tantalum powder.The specific capacitance of the flake tantalum powder is higher than that of the nodular tantalum powder with the same surface area when anodized at high voltage,Thus,the flake tantalum powder is suitable for manufacturing tantalum solid electrolytic capacitors in the range of median and high (20-63 V) voltages.

  10. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.H.H.; Soetens, F.

    2006-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical pr

  11. The fire brigade renovates

    CERN Multimedia

    2002-01-01

    The new fire engine at CERN's Fire Station. A shiny brand-new fire engine is now attracting all the attention of the members of CERN's fire brigade. Since the beginning of last week this engine has taken over from an 18-year-old one, which has now been 'retired' from service. This modern vehicle, built in Brescia, Italy, is much lighter and more powerful than the old one and is equipped to allow the fire service to tackle most call-outs without the support of at least one other vehicle, as is currently necessary. The new fire engine is designed to transport six fire-fighters, 2000 litres of water, and is equipped not only for fire fighting actions but also to respond initially to any other kind of call-out, such as traffic accidents, chemical incidents, pollution, lightning, etc. It goes almost without saying that it is provided with the most modern safety measures, a low centre of gravity, as well as a special chassis and a combination pump (low and high pressure), which improve the safety and performance ...

  12. Fire forum 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The conference contains 18 presentations on various aspects of fire prevention and protection within the power production plants and industry, safety of building constructions, cable and transformer problems, risk and safety evaluation methods, management aspects, relevant Norwegian and Icelandic laws and regulations and oil analysis. Some examples of fires and explosions are also presented. (tk)

  13. Fire Incident Reporting Manual

    Science.gov (United States)

    1984-02-01

    are backstage areas, dressing rooms, ice rinks, boxing rings, and basketball floors. 37. Projection room or area. Included are stage light and...or taper . 45. Match. 46. Lighter (flame type). 47. Open fire. Included are campfires, bonfires, warning flares, rubbish fires, open trash burners, open

  14. Hot fire, cool soil

    NARCIS (Netherlands)

    Stoof, C.R.; Moore, D.; Fernandes, P.; Stoorvogel, J.J.; Fernandes, R.; Ferreira, A.J.D.; Ritsema, C.J.

    2013-01-01

    Wildfires greatly increase a landscape's vulnerability to flooding and erosion events by removing vegetation and changing soils. Fire damage to soil increases with increasing soil temperature, and, for fires where smoldering combustion is absent, the current understanding is that soil temperatures i

  15. Advanced fire information system

    CSIR Research Space (South Africa)

    Frost, PE

    2007-01-01

    Full Text Available The South African Advanced Fire Information System (AFIS) is the first near real-time satellite-based fire monitoring system in Africa. It was originally developed for, and funded by, the electrical power utility Eskom, to reduce the impact of wild...

  16. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.H.H.; Soetens, F.

    2006-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical

  17. Reciprocal Fire Protection Agreement between Silver Creek Rangeland Fire Protection Association and Burns Interagency Fire Zone

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is the Reciprocal Fire Protection Agreement between the Silver Creek Rangeland Fire Protection Association and the Burns Interagency Fire Zone. The objectives...

  18. A Review of Fire Interactions and Mass Fires

    Directory of Open Access Journals (Sweden)

    Mark A. Finney

    2011-01-01

    Full Text Available The character of a wildland fire can change dramatically in the presence of another nearby fire. Understanding and predicting the changes in behavior due to fire-fire interactions cannot only be life-saving to those on the ground, but also be used to better control a prescribed fire to meet objectives. In discontinuous fuel types, such interactions may elicit fire spread where none otherwise existed. Fire-fire interactions occur naturally when spot fires start ahead of the main fire and when separate fire events converge in one location. Interactions can be created intentionally during prescribed fires by using spatial ignition patterns. Mass fires are among the most extreme examples of interactive behavior. This paper presents a review of the detailed effects of fire-fire interaction in terms of merging or coalescence criteria, burning rates, flame dimensions, flame temperature, indraft velocity, pulsation, and convection column dynamics. Though relevant in many situations, these changes in fire behavior have yet to be included in any operational-fire models or decision support systems.

  19. Human-started wildfires expand the fire niche across the United States

    Science.gov (United States)

    Balch, Jennifer K.; Bradley, Bethany A.; Nagy, R. Chelsea; Fusco, Emily J.; Mahood, Adam L.

    2017-01-01

    The economic and ecological costs of wildfire in the United States have risen substantially in recent decades. Although climate change has likely enabled a portion of the increase in wildfire activity, the direct role of people in increasing wildfire activity has been largely overlooked. We evaluate over 1.5 million government records of wildfires that had to be extinguished or managed by state or federal agencies from 1992 to 2012, and examined geographic and seasonal extents of human-ignited wildfires relative to lightning-ignited wildfires. Humans have vastly expanded the spatial and seasonal “fire niche” in the coterminous United States, accounting for 84% of all wildfires and 44% of total area burned. During the 21-y time period, the human-caused fire season was three times longer than the lightning-caused fire season and added an average of 40,000 wildfires per year across the United States. Human-started wildfires disproportionally occurred where fuel moisture was higher than lightning-started fires, thereby helping expand the geographic and seasonal niche of wildfire. Human-started wildfires were dominant (>80% of ignitions) in over 5.1 million km2, the vast majority of the United States, whereas lightning-started fires were dominant in only 0.7 million km2, primarily in sparsely populated areas of the mountainous western United States. Ignitions caused by human activities are a substantial driver of overall fire risk to ecosystems and economies. Actions to raise awareness and increase management in regions prone to human-started wildfires should be a focus of United States policy to reduce fire risk and associated hazards. PMID:28242690

  20. Fires in Chile

    Science.gov (United States)

    2002-01-01

    On February 5, 2002, the dense smoke from numerous forest fires stretched out over the Pacific Ocean about 400 miles south of Santiago, Chile. This true-color Moderate-resolution Imaging Spectroradiometer (MODIS) image shows the fires, which are located near the city of Temuco. The fires are indicated with red dots (boxes in the high-resolution imagery). The fires were burning near several national parks and nature reserves in an area of the Chilean Andes where tourism is very popular. Southeast of the fires, the vegetation along the banks of the Rio Negro in Argentina stands out in dark green. Image courtesy Jacques Descloitres, MODIS Land Rapid Response Team at NASA GSFC

  1. Yohimbine reinstates extinguished 3,4-methylenedioxymethamphetamine (MDMA; ecstasy) seeking in rats with prior exposure to chronic yohimbine.

    Science.gov (United States)

    Ball, Kevin T; Jarsocrak, Hanna; Hyacinthe, Johanna; Lambert, Justina; Lockowitz, James; Schrock, Jordan

    2015-11-01

    Although exposure to acute stress has been shown to reinstate extinguished responding for a wide variety of drugs, no studies have investigated stress-induced reinstatement in animals with a history of 3,4-methylenedioxymethamphetamine (MDMA; ecstasy) self-administration. Thus, rats were trained to press a lever for MDMA (0.50 mg/kg/infusion) in daily sessions, and lever pressing was subsequently extinguished in the absence of MDMA and conditioned cues (light and tone). We then tested the ability of acute yohimbine (2.0 mg/kg), a pharmacological stressor, to reinstate lever-pressing under extinction conditions. Additionally, to model chronic stress, some rats were injected daily with yohimbine (5.0 mg/kg × 10 days) prior to reinstatement tests. To assess dopaminergic involvement, chronic yohimbine injections were combined with injections of SCH-23390 (0.0 or 10.0 μg/kg), a dopamine D1-like receptor antagonist. In a separate experiment, rats with a history of food self-administration were treated and tested in the same way. Results showed that acute yohimbine injections reinstated extinguished MDMA and food seeking, but only in rats with a history of chronic yohimbine exposure. Co-administration of SCH-23390 with chronic yohimbine injections prevented the potentiation of subsequent food seeking, but not MDMA seeking. These results suggest that abstinent MDMA users who also are exposed to chronic stress may be at increased risk for future relapse, and also that the effects of chronic stress on relapse may be mediated by different mechanisms depending on one's drug use history.

  2. Yohimbine reinstates extinguished 3,4-methylenedioxymethamphetamine (MDMA; ecstasy) seeking in rats with prior exposure to chronic yohimbine

    Science.gov (United States)

    Ball, Kevin T.; Jarsocrak, Hanna; Hyacinthe, Johanna; Lambert, Justina; Lockowitz, James; Schrock, Jordan

    2015-01-01

    Although exposure to acute stress has been shown to reinstate extinguished responding for a wide variety of drugs, no studies have investigated stress-induced reinstatement in animals with a history of 3,4-methylenedioxymethamphetamine (MDMA; ecstasy) self-administration. Thus, rats were trained to press a lever for MDMA (0.50 mg/kg/infusion) in daily sessions, and lever pressing was subsequently extinguished in the absence of MDMA and conditioned cues (light and tone). We then tested the ability of acute yohimbine (2.0 mg/kg), a pharmacological stressor, to reinstate lever-pressing under extinction conditions. Additionally, to model chronic stress, some rats were injected daily with yohimbine (5.0 mg/kg × 10 days) prior to reinstatement tests. To assess dopaminergic involvement, chronic yohimbine injections were combined with injections of SCH-23390 (0.0 or 10.0 μg/kg), a dopamine D1-like receptor antagonist. In a separate experiment, rats with a history of food self-administration were treated and tested in the same way. Results showed that acute yohimbine injections reinstated extinguished MDMA and food seeking, but only in rats with a history of chronic yohimbine exposure. Co-administration of SCH-23390 with chronic yohimbine injections prevented the potentiation of subsequent food seeking, but not MDMA seeking. These results suggest that abstinent MDMA users who also are exposed to chronic stress may be at increased risk for future relapse, and also that the effects of chronic stress on relapse may be mediated by different mechanisms depending on one’s drug use history. PMID:26241170

  3. USFA NFIRS 2009 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2009 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  4. USFA NFIRS 2004 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2004 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  5. USFA NFIRS 2006 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2006 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  6. USFA NFIRS 2000 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2000 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  7. USFA NFIRS 2007 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2007 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  8. USFA NFIRS 1999 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 1999 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  9. USFA NFIRS 2008 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2008 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  10. Fire science at LLNL: A review

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, H.K. (ed.)

    1990-03-01

    This fire sciences report from LLNL includes topics on: fire spread in trailer complexes, properties of welding blankets, validation of sprinkler systems, fire and smoke detectors, fire modeling, and other fire engineering and safety issues. (JEF)

  11. USFA NFIRS 2003 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2003 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  12. USFA NFIRS 2005 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2005 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  13. USFA NFIRS 2002 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2002 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  14. USFA NFIRS 2001 Basic Fire Incident Data

    Data.gov (United States)

    Department of Homeland Security — The 2001 US Fire Administration Fire (USFA) Fire Incident & Cause Data was provided by the U.S. Fire Administration's (USFA) National Fire Data Center's (NFDC's)...

  15. Powder lubrication of faults by powder rolls in gouge zones

    Science.gov (United States)

    Chen, X.; Madden, A. S.; Reches, Z.

    2013-12-01

    Powder-lubrication by fault gouge can be an effective mechanism of dynamic weakening of faults (Reches & Lockner, 2010); however, the physical mechanisms of this lubrication are poorly understood. While the flow of coarse-grained (> 100 μm) materials, e.g. glass beads or quartz sand, was extensively studied, the flow of fine-grained (nano-powders, have remained enigmatic. We report here experimental results of a new efficient mechanism for powder lubrication. We conducted friction tests on high-velocity rotary shear apparatus (Reches & Lockner, 2010). Two types of experimental faults were tested: (1) faults made of solid, igneous rocks (granite, tonalite and diorite); and (2) fault-zones made of 2-3 mm thick layer of granular materials (oolites, calcite or gypsum) sheared in a confined cell. We performed 21 runs with total slip of 0.14-13 m, normal stress of 1.2-14.5 MPa, slip velocity of 0.012-0.97 m/s. The ultra-microscopic (SEM and AFM) analysis of the experimental slip surfaces revealed two outstanding features in 17 out of the 21 experiments: (1) localized fault-slip along Principal Slip Zones (PSZs) that are composed of a dense, shiny, cohesive crust, 0.5-1 micron thick, that overlaid a porous substrate, and (2) elongated rolls composed of gouge-powder into three-dimensional structures of closely-packed powder grains, (20-50 nm in size). The rolls are cylindrical, 0.75-1.4 micron wide, and 1.7-30 micron long, with smooth outer surface, and laminated, concentric layers of compacted grains. The rolls were exclusively found on the PSZs. Many rolls were destroyed fracturing and smearing on the PSZ, suggesting that the rolls underwent a life cycle of formation and destruction. Significant macroscopic friction reduction was measured in experiments with observed rolls, and no (or minor) friction reduction in the four experiments without rolls. The final, reduced friction coefficients have a general reciprocal relation to the rolls surface coverage, suggesting that

  16. Recommended plutonium release fractions from postulated fires. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kogan, V.; Schumacher, P.M.

    1993-12-01

    This report was written at the request of EG&G Rocky Flats, Inc. in support of joint emergency planning for the Rocky Flats Plant (RFP) by EG&G and the State of Colorado. The intent of the report is to provide the State of Colorado with an independent assessment of any respirable plutonium releases that might occur in the event of a severe fire at the plant. Fire releases of plutonium are of interest because they have been used by EG&G to determine the RFP emergency planning zones. These zones are based on the maximum credible accident (MCA) described in the RFP Final Environmental Impact Statement (FEIS) of 1980, that MCA is assumed to be a large airplane crashing into a RFP plutonium building.The objective of this report was first, to perform a worldwide literature review of relevant release experiments from 1960 to the present and to summarize those findings, and second, to provide recommendations for application of the experimental data to fire release analyses at Rocky Flats. The latter step requires translation between experimental and expected RFP accident parameters, or ``scaling.`` The parameters of particular concern are: quantities of material, environmental parameters such as the intensity of a fire, and the physico-chemical forms of the plutonium. The latter include plutonium metal, bulk plutonium oxide powder, combustible and noncombustible wastes contaminated with plutonium oxide powder, and residues from plutonium extraction processes.

  17. Modelling of fire count data: fire disaster risk in Ghana.

    Science.gov (United States)

    Boadi, Caleb; Harvey, Simon K; Gyeke-Dako, Agyapomaa

    2015-01-01

    Stochastic dynamics involved in ecological count data require distribution fitting procedures to model and make informed judgments. The study provides empirical research, focused on the provision of an early warning system and a spatial graph that can detect societal fire risks. It offers an opportunity for communities, organizations, risk managers, actuaries and governments to be aware of, and understand fire risks, so that they will increase the direct tackling of the threats posed by fire. Statistical distribution fitting method that best helps identify the stochastic dynamics of fire count data is used. The aim is to provide a fire-prediction model and fire spatial graph for observed fire count data. An empirical probability distribution model is fitted to the fire count data and compared to the theoretical probability distribution of the stochastic process of fire count data. The distribution fitted to the fire frequency count data helps identify the class of models that are exhibited by the fire and provides time leading decisions. The research suggests that fire frequency and loss (fire fatalities) count data in Ghana are best modelled with a Negative Binomial Distribution. The spatial map of observed fire frequency and fatality measured over 5 years (2007-2011) offers in this study a first regional assessment of fire frequency and fire fatality in Ghana.

  18. Electronic firing systems and methods for firing a device

    Science.gov (United States)

    Frickey, Steven J [Boise, ID; Svoboda, John M [Idaho Falls, ID

    2012-04-24

    An electronic firing system comprising a control system, a charging system, an electrical energy storage device, a shock tube firing circuit, a shock tube connector, a blasting cap firing circuit, and a blasting cap connector. The control system controls the charging system, which charges the electrical energy storage device. The control system also controls the shock tube firing circuit and the blasting cap firing circuit. When desired, the control system signals the shock tube firing circuit or blasting cap firing circuit to electrically connect the electrical energy storage device to the shock tube connector or the blasting cap connector respectively.

  19. Fires in Myanmar (2007)

    Science.gov (United States)

    2007-01-01

    In Southeast Asia, fires are common and widespread throughout the dry season, which roughly spans the northern hemisphere winter months. People set fires to clear crop stubble and brush and to prepare grazing land for a new flush of growth when the rainy season arrives. These intentional fires are too frequently accompanied by accidental fires that invade nearby forests and woodlands. The combination of fires produces a thick haze that alternately lingers and disperses, depending on the weather. This image from the Moderate Resolution Imaging Spectroradiometer (MODIS) on NASA's Aqua satellite shows fire activity on March 19, 2007, across eastern India, Myanmar, Thailand, Laos, and China. Places where MODIS detected actively burning fires are marked in red on the image. The darker green areas are generally more wooded areas or forests, while the paler green and tan areas are agricultural land. Smoke pools over low-lying areas of the hilly terrain in gray pockets. The green tops of rolling hills in Thailand emerge from a cloud of low-lying smoke. According to news reports from Thailand, the smoke blanket created air quality conditions that were considered unhealthy for all groups, and it prompted the Thai Air Force to undertake cloud-seeding attempts in an effort to cleanse the skies with rain. Commercial air traffic was halted due to poor visibility.

  20. The Spirit of Fire

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    POTTERY born around 5,000-7,000years ago,is the crystallization ofhuman being’s experience ofmolding earth with fire.It was also the firstcreation of man.From ancient to moderntimes,fire has accompanied every potterymaker.The contemporary artist Picassoonce said,“Fire is a special color set apartfrom those on the palette.It can create anart described by one poet as "the smeltingof seven colored sun rays”.ZhangWenzhi,from the Art Academy ofGuangzhou,is a woman who hascontributed herself wholly to the art of

  1. Coal-fired generation

    CERN Document Server

    Breeze, Paul

    2015-01-01

    Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. Focuses on the evolution of the traditio

  2. Fire Threatens the Grasslands

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    FIRE is herdsmen’s woe. It is said by elderly people that fire almost destroyed the entire grasslands long ago. Few domestic animals survived and with great difficulty the people rebuilt and replanted what they could for many generations. Because of their efforts the grasslands survived. I have never experienced that kind of tragedy, but I could sense the fear in people’s voices when they talked of it. It is actually an unwritten law on the grasslands that whenever a fire occurs, no matter how far away or how dangerous it is, you must go out and fight it.

  3. Probabilistic fire simulator - Monte Carlo simulation tool for fire scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Hostikka, S.; Keski-Rahkonen, O. [VTT Building and Transport, Espoo (Finland)

    2002-11-01

    Risk analysis tool is developed for computing of the distributions of fire model output variables. The tool, called Probabilistic Fire Simulator, combines Monte Carlo simulation and CFAST two-zone fire model. In this work, it is used to calculate failure probability of redundant cables and fire detector activation times in a cable tunnel fire. Sensitivity of the output variables to the input variables is calculated in terms of the rank order correlations. (orig.)

  4. Laboratory fire behavior measurements of chaparral crown fire

    Science.gov (United States)

    C. Sanpakit; S. Omodan; D. Weise; M Princevac

    2015-01-01

    In 2013, there was an estimated 9,900 wildland fires that claimed more than 577,000 acres of land. That same year, about 542 prescribed fires were used to treat 48,554 acres by several agencies in California. Being able to understand fires using laboratory models can better prepare individuals to combat or use fires. Our research focused on chaparral crown fires....

  5. A Study of Fire Prevention in Large Warehouse Supermarket%大型仓储式超市消防安全对策探讨

    Institute of Scientific and Technical Information of China (English)

    白静

    2012-01-01

    大型仓储式超市空间大、人员密集、火灾荷载大,存在较严重的火灾隐患。发生火灾后火势蔓延迅速、人员疏散困难,有坍塌危险,也将影响灭火救援行动。通过分析大型仓储式超市的建筑结构特点和火灾特点,从建筑消防设计要求和消防安全管理措施方面提出了消防安全对策。%Large-scale warehouse supermarkets have the characteristics of huge space,crowded costumers,heavy fire-loads and serious fire hazards.The fire spreads quickly and causes human evacuation difficult and collapses.It is hard to extinguish and rescue the fire.Through the analysis on building structure characteristics and fire features,this paper puts forward fire prevention countermeasures for large-scale warehouse supermarkets from the building design requirements and fire control safety management.

  6. 关于煤矿火区封闭与管理的探讨%Investigate on Fire Zone Sealing and Management in Coal Mine

    Institute of Scientific and Technical Information of China (English)

    任振宇

    2013-01-01

    In our country every year because of fire accidents make many of the mining area are closed,and thus lead to a large number of resources are frozen.The author summarize site management experience for many years,discuss fire zone sealing,fire zone management and closed fire zone unsealed,emphasize the programmatic role of the "coal mine safety regulations"and "mine sealing fire preventing and extinguishing specification"in fire zone management and have a certain reference value for management personnel of the mine fire zone.%在我国每年都会因为火灾事故而使得许多采区被封闭,因而也导致大量资源被冻结。作者总结多年的现场管理经验,对火区封闭、火区管理及封闭火区的启封进行了论述,强调了在火区管理中《煤矿安全规程》及《矿井密闭防灭火规范》的纲领性作用,对矿井现场火区的管理人员均有一定的参考价值。

  7. An 800-year fire history

    Science.gov (United States)

    Stanley G. Kitchen

    2010-01-01

    "Fire in the woods!" The words are a real heart stopper. Yet in spite of its capacity to destroy, fire plays an essential role in shaping plant communities. Knowledge of the patterns of fire over long time periods is critical for understanding this role. Trees often retain evidence of nonlethal fires in the form of injuries or scars in the annual growth rings...

  8. Fire safety of wood construction

    Science.gov (United States)

    Robert H. White; Mark A. Dietenberger

    2010-01-01

    Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

  9. Electrodeposition of Fe powder from acid electrolytes

    Directory of Open Access Journals (Sweden)

    VESNA M. MAKSIMOVIC

    2008-08-01

    Full Text Available Polarization characteristics of the electrodeposition processes of Fe powders from sulfate and chloride electrolytes and the morphology of the obtained powders were investigated. The morphology depended on the anion presence in the electrolyte but not on the current density in the investigated range. A characteristic feature of the dendritic powder with cauliflower endings obtained from sulfate electrolyte is the presence of cone-like cavities and the crystallite morphology of the powders surface. On the other hand, Fe powders electrodeposited from chloride electrolyte appear in the form of agglomerates. A soap solution treatment applied as a method of washing and drying provides good protection from oxidation of the powders.

  10. Fire in the Earth system

    Science.gov (United States)

    Bowman, David M.J.S.; Balch, Jennifer; Artaxo, Paulo; Bond, William J.; Carlson, Jean M.; Cochrane, Mark A.; D'Antonio, Carla M.; DeFries, Ruth S.; Doyle, John C.; Harrison, Sandy P.; Johnston, Fay H.; Keeley, Jon E.; Krawchuk, Meg A.; Kull, Christian A.; Marston, J. Brad; Moritz, Max A.; Prentice, I. Colin; Roos, Christopher I.; Scott, Andrew C.; Swetnam, Thomas W.; van der Werf, Guido R.; Pyne, Stephen

    2009-01-01

    Fire is a worldwide phenomenon that appears in the geological record soon after the appearance of terrestrial plants. Fire influences global ecosystem patterns and processes, including vegetation distribution and structure, the carbon cycle, and climate. Although humans and fire have always coexisted, our capacity to manage fire remains imperfect and may become more difficult in the future as climate change alters fire regimes. This risk is difficult to assess, however, because fires are still poorly represented in global models. Here, we discuss some of the most important issues involved in developing a better understanding of the role of fire in the Earth system.

  11. Fire in the Earth system.

    Science.gov (United States)

    Bowman, David M J S; Balch, Jennifer K; Artaxo, Paulo; Bond, William J; Carlson, Jean M; Cochrane, Mark A; D'Antonio, Carla M; Defries, Ruth S; Doyle, John C; Harrison, Sandy P; Johnston, Fay H; Keeley, Jon E; Krawchuk, Meg A; Kull, Christian A; Marston, J Brad; Moritz, Max A; Prentice, I Colin; Roos, Christopher I; Scott, Andrew C; Swetnam, Thomas W; van der Werf, Guido R; Pyne, Stephen J

    2009-04-24

    Fire is a worldwide phenomenon that appears in the geological record soon after the appearance of terrestrial plants. Fire influences global ecosystem patterns and processes, including vegetation distribution and structure, the carbon cycle, and climate. Although humans and fire have always coexisted, our capacity to manage fire remains imperfect and may become more difficult in the future as climate change alters fire regimes. This risk is difficult to assess, however, because fires are still poorly represented in global models. Here, we discuss some of the most important issues involved in developing a better understanding of the role of fire in the Earth system.

  12. FIRE HAZARDS ANALYSIS - BUSTED BUTTE

    Energy Technology Data Exchange (ETDEWEB)

    R. Longwell; J. Keifer; S. Goodin

    2001-01-22

    The purpose of this fire hazards analysis (FHA) is to assess the risk from fire within individual fire areas at the Busted Butte Test Facility and to ascertain whether the DOE fire safety objectives are met. The objective, identified in DOE Order 420.1, Section 4.2, is to establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: (1) The occurrence of a fire related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees. (3) Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. Critical process controls and safety class systems being damaged as a result of a fire and related events.

  13. Morpho-structural and luminescent investigations of niobium activated yttrium tantalate powders

    Energy Technology Data Exchange (ETDEWEB)

    Hristea, Amalia [' Raluca Ripan' Institute for Research in Chemistry, Fantanele 30, R-400294 Cluj-Napoca (Romania); Faculty of Chemistry and Chemical Engineering, ' Babes-Bolyai' University, 11 Arany Janos, 400028 Cluj-Napoca (Romania)], E-mail: amaliahristea@gmail.com; Popovici, Elisabeth-Jeanne; Muresan, Laura [' Raluca Ripan' Institute for Research in Chemistry, Fantanele 30, R-400294 Cluj-Napoca (Romania); Stefan, Maria [' Raluca Ripan' Institute for Research in Chemistry, Fantanele 30, R-400294 Cluj-Napoca (Romania); Faculty of Chemistry and Chemical Engineering, ' Babes-Bolyai' University, 11 Arany Janos, 400028 Cluj-Napoca (Romania); Grecu, Rodica [' Raluca Ripan' Institute for Research in Chemistry, Fantanele 30, R-400294 Cluj-Napoca (Romania); Johansson, Anders [Angstrom Laboratory, Department of Materials Chemistry, Uppsala University, Box 538, 751 21 Uppsala (Sweden); Boman, Mats [Angstrom Laboratory, Department of Materials Chemistry, Uppsala University, Box 538, 751 21 Uppsala (Sweden)], E-mail: mats.boman@mkem.uu.se

    2009-03-05

    Yttrium tantalate-based phosphors are a class of efficient luminescent materials used in medical imaging applications. The paper presents the influence of activator concentration, firing regime and flux nature on the crystalline structure, morphology and luminescent characteristics of niobium activated yttrium tantalate powders. Phosphors samples were prepared by solid-state reaction route and their properties were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) measurements and scanning electron microscopy (SEM)

  14. Design of Intelligent Tracking Fire Car%智能循迹消防小车设计

    Institute of Scientific and Technical Information of China (English)

    杨红; 李生明; 袁明月

    2011-01-01

    Intelligent tracing fire car consists the following eight parts: tracing-module, finding-fire module, speed-detecting module, fire-fighting module, displaying module, car tail light, motor-drivering module and MCU controlling module. By using AT89S52 as the core it control the car to realize the control and communication of each module. This car has a designated routes, according to patrol found on the function of automatic fire extinguishing fire. Tracing some of the reflective optical sensor and the comparator component, the data will be collected after processing feedback to the microcontroller; finding the fire in part by the ADC0809 and the infrared tubes; fire in part by the step-up circuit and fan components; motor will be drived by a L298N core components. The car has a patrol in accordance with designated routes and finds the automatic fire extinguishing function.%智能循迹消防小车由寻迹模块、寻火模块、测速模块、灭火模块、显示模块、车尾灯、电机驱动模块以及MCU控制模块等八大部分构成。采用爱特梅尔半导体公司的AT89S52作为小车的控制核心,实现对各个模块的通讯和控制。寻迹部分以反射式光电传感器和比较器组成,将采集到的数据处理后反馈至单片机;寻火部分由ADC0809与红外对管组成;灭火部分由升压电路和风扇组成;电机由以L298N为核心部件的电路驱动。该小车具有按照指定的路线巡逻,发现火源进行自动灭火的功能。

  15. POWDER COATINGS: A TECHNOLOGY REVIEW

    Science.gov (United States)

    In 1995, surface coatings accounted for nearly 2.55 million Mg of volatile organic compound (VOC) emissions nationally, which is more than 12% of VOC emissions from all sources. In recent years, powder coatings have been steadily gaining popularity as an alternative to solvent-bo...

  16. Mask materials for powder blasting

    NARCIS (Netherlands)

    Wensink, Henk; Jansen, Henri V.; Berenschot, J.W.; Elwenspoek, Miko C.

    2001-01-01

    Powder blasting, or abrasive jet machining (AJM), is a technique in which a particle jet is directed towards a target for mechanical material removal. It is a fast, cheap and accurate directional etch technique for brittle materials such as glass, silicon and ceramics. The particle jet (which expand

  17. Aircraft Fire Protection Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Navy Aircraft Protection Laboratory provides complete test support for all Navy air vehicle fire protection systems. The facility allows for the simulation of a...

  18. Aircraft Fire Protection Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Navy Aircraft Protection Laboratory provides complete test support for all Navy air vehicle fire protection systems.The facility allows for the simulation of a...

  19. Fire Mapper Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The design of a UAV mounted Fire Mapper system is proposed. The system consists of a multi-band imaging sensor, a data processing system and a data communication...

  20. United States Fire Administration

    Science.gov (United States)

    Skip to main content About USFA Hotel/Motel Contact Us Search Email subscriptions Training & Professional Development Fire Prevention & Public Education Operations Management & Safety Data Publications & Library Grants & Funding About USFA Hotel/Motel Contact Us Email subscriptions Disaster sheltering ...

  1. Basic Research Firing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Basic Research Firing Facility is an indoor ballistic test facility that has recently transitioned from a customer-based facility to a dedicated basic research...

  2. Fire History Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past fire occurrence from tree rings, charcoal found in lake sediments, and other proxies. Parameter keywords describe what was measured in this data set....

  3. Fire Perimeters (2012)

    Data.gov (United States)

    Department of Homeland Security — The Geospatial Multi-Agency Coordination Group, or GeoMAC, is an internet-based mapping tool originally designed for fire managers to access online maps of current...

  4. RETRO Fires Aggr

    Data.gov (United States)

    Washington University St Louis — Within the RETRO project, global gridded data sets for anthropogenic and vegetation fire emissions of several trace gases were generated, covering the period from...

  5. Cooperative Fire Protection Agreement

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this Agreement is to provide for cooperation in the prevention, detection and suppression of wildland fires within the protection areas designated in...

  6. Fire Management Species Profiles

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objective of the Fire Management Species Profile project is to identify habitat management objectives that are specific, measurable, achievable, clearly...

  7. Fire Management Plan 1984

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This plan considers fire on Erie as a tool for management and as a potential problem to be dealt with. This document discusses environmental impacts and alternatives...

  8. Findings From Fire Inspections

    Data.gov (United States)

    Nuclear Regulatory Commission — The purpose of this study data is to provide a metric with which to assess the effectiveness of improvements to the U.S. NRC's fire protection regulations in support...

  9. Fire characteristics charts for fire behavior and U.S. fire danger rating

    Science.gov (United States)

    Faith Ann Heinsch; Pat Andrews

    2010-01-01

    The fire characteristics chart is a graphical method of presenting U.S. National Fire Danger Rating indices or primary surface or crown fire behavior characteristics. A desktop computer application has been developed to produce fire characteristics charts in a format suitable for inclusion in reports and presentations. Many options include change of scales, colors,...

  10. Advanced composites take a powder

    Energy Technology Data Exchange (ETDEWEB)

    Holty, D.W. (Custom Composite Materials, Inc., Atlanta, GA (United States))

    1993-06-01

    To a professional chemist with more than 25 years of industrial experience, the world of advanced composites is a fascinating new venue. Here resins and fibers come together in a completely synergistic partnership, achieving marvels of strength and light weight that make advanced composite materials virtually the only solution for challenging applications. In the late 1980s, Professor John Muzzy of the Georgia Institute of Technology, was intrigued by the physical properties of thermoplastics, and he developed a new way to bring the thermoplastic resins together with high-performance fibers. As part of the work Muzzy did with Lockheed and NASA he demonstrated that electrostatic powder coating was an attractive new method for combining thermoplastic resins with reinforcing fibers. Presentation of this work by Lockheed at a government-industry conference led to a new project for Muzzy, sponsored by NASA Langley. Powder prepregging proved to be the attractive alternative that NASA was looking for. While working on powder prepregging with LaRC-TPI, Muzzy and his colleagues developed methods for exposing all of the fibers to the powder to improve the distribution of the resin on the tow, a continuous bundle of filaments. Optimal resin distribution was achieved by spreading the moving tow. A very flexible towpreg was produced by maintaining the spread tow through the powder coating chamber and into the oven, where the resin particles were fused to the individual filaments. Muzzy's invention has enabled Custom Composite Materials, Inc. to offer resin/fiber combinations based on thermoplastic resins such as nylon and polypropylene. Beyond the expected advantages over epoxy thermoset systems, they are beginning to exploit a fundamental property of thermoplastic resins: viscoelasticity, which can be defined as the resistance to flow as a function of applied stress. Thermoplastics have a much higher viscoelasticity than thermosets.

  11. FIRE PROTECTION SYSTEMS AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Aristov Denis Ivanovich

    2016-03-01

    Full Text Available The All-Russian Congress “Fire Stop Moscow” was de-voted to the analysis of the four segments of the industry of fire protection systems and technologies: the design of fire protec-tion systems, the latest developments and technologies of active and passive fire protection of buildings, the state and the devel-opment of the legal framework, the practice of fire protection of buildings and structures. The forum brought together the repre-sentatives of the industry of fire protection systems, scientists, leading experts, specialists in fire protection and representatives of construction companies from different regions of Russia. In parallel with the Congress Industrial Exhibition of fire protection systems, materials and technology was held, where manufacturers presented their products. The urgency of the “Fire Stop Moscow” Congress in 2015 organized by the Congress Bureau ODF Events lies primarily in the fact that it considered the full range of issues related to the fire protection of building and construction projects; studied the state of the regulatory framework for fire safety and efficiency of public services, research centers, private companies and busi-nesses in the area of fire safety. The main practical significance of the event which was widely covered in the media space, was the opportunity to share the views and information between management, science, and practice of business on implementing fire protection systems in the conditions of modern economic relations and market realities. : congress, fire protection, systems, technologies, fire protection systems, exhibition

  12. Fires in Southern California

    Science.gov (United States)

    2007-01-01

    In what seemed like the blink of an eye, wildfires ignited in the paper-dry, drought-stricken vegetation of Southern California over the weekend of October 20, 2007, and exploded into massive infernos that forced hundreds of thousands of people to evacuate their communities. Driven by Santa Ana winds, fires grew thousands of acres in just one to two days. The fires sped down from the mountains into the outskirts of coastal cities, including San Diego. Dozens of homes have burned to the ground, and at least one person has died, according to local news reports. Several of the fires were burning completely out of control as of October 22. This image of the fires in California was captured at 1:55 p.m. U.S. Pacific Daylight Time on October 22, 2007. Places where MODIS detected actively burning fires are outlined in red. Thick streamers of smoke unfurl over the Pacific Ocean. The brownish plumes are clouds of dust. Fires northwest of Los Angeles seemed calmer at the time of this image than they were the previous day.

  13. Ultra fine tantalum powder for advanced capacitors

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Ultra fine tantalum and niobium powders are applicable in many areas of engineering. Of particular significance are high purity powders that are usable in production of high capacitance capacitors and superconductors.

  14. Ultra fine tantalum powder for advanced capacitors

    Institute of Scientific and Technical Information of China (English)

    Nebera; A.; Markusbkin; Yu.; Azarov; V.; Ermolaev; N.

    2005-01-01

    Ultra fine tantalum and niobium powders are applicable in many areas of engineering. Of particular significance are high purity powders that are usable in production of high capacitance capacitors and superconductors.……

  15. Electrical modeling of semiconductor bridge (SCB) BNCP detonators with electrochemical capacitor firing sets

    Energy Technology Data Exchange (ETDEWEB)

    Marx, K.D. [Sandia National Labs., Livermore, CA (United States); Ingersoll, D.; Bickes, R.W. Jr. [Sandia National Labs., Albuquerque, NM (United States)

    1998-11-01

    In this paper the authors describe computer models that simulate the electrical characteristics and hence, the firing characteristics and performance of a semiconductor bridge (SCB) detonator for the initiation of BNCP [tetraammine-cis-bis (5-nitro-2H-tetrazolato-N{sup 2}) cobalt(III) perchlorate]. The electrical data and resultant models provide new insights into the fundamental behavior of SCB detonators, particularly with respect to the initiation mechanism and the interaction of the explosive powder with the SCB. One model developed, the Thermal Feedback Model, considers the total energy budget for the system, including the time evolution of the energy delivered to the powder by the electrical circuit, as well as that released by the ignition and subsequent chemical reaction of the powder. The authors also present data obtained using a new low-voltage firing set which employed an advanced electrochemical capacitor having a nominal capacitance of 350,000 {micro}F at 9 V, the maximum voltage rating for this particular device. A model for this firing set and detonator was developed by making measurements of the intrinsic capacitance and equivalent series resistance (ESR < 10 m{Omega}) of a single device. This model was then used to predict the behavior of BNCP SCB detonators fired alone, as well as in a multishot, parallel-string configuration using a firing set composed of either a single 9 V electrochemical capacitor or two of the capacitors wired in series and charged to 18 V.

  16. 快速控制技术在朱家河煤矿自燃火灾中的应用研究%Application study on fast control of spontaneous fire in Zhu Jia He coal mine

    Institute of Scientific and Technical Information of China (English)

    费金彪; 何毅

    2012-01-01

    矿井煤体一旦发生自燃,其中就集聚了大量能量,同时释放CO等有毒有害气体,在发现煤自燃火灾后快速控制及熄灭煤火是煤自燃防治工作中的一项重要任务。本文针对朱家河煤矿12510工作面停采线附近煤自燃情况进行分析,采取基于胶体防灭火为主的快速控制技术,介绍了胶体的性能及火区治理工艺,论述了快速控制技术在朱家河煤矿的成功应用。%Once the occurrence of spontaneous combustion in coal body, which gathered a great deal of energy. At the same time, the re- lease of CO and other toxic and harmful gas. Once find the fire, rapidly control and extinguish fires of coal spontaneous combustion is an im- portant task. In this article, according to Zhu Jia He coal mine12510 working face coal spontaneous combustion near the spot line, analyzed the situation. Taked the fast control technology based on colloid for fire extinguishing technology, introduced the colloid performance and fire management process, discusses the fast control technology applying for Zhu Jia He coal mine successfully.

  17. Preparation and Sinterability of Mn-Zn Ferrite Powders by Sol-Gel Method

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Mn-Zn spinel ferrites were synthesized by sol-gel method. Effects of calcined temperature on structure and particle size of MnZnFe2O4 were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD patterns indicate that the ultra fine Mn-Zn ferrite exhibits a spinel crystal structure. SEM images show that the powder fired at 900 ℃ for 2 h has an average diameter of 60~90 nm. The particle size becomes larger with the increasing of calcined temperature and the distribution of particle becomes even more homogeneous. Sintering behaviors of synthesized ferrite powders depend on the powder characteristics and high temperatures have induced the good crystallization of particles.

  18. Test Plan to Assess Fire Effects on the Function of an Engineered Surface Barrier

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Anderson L.; Berlin, Gregory T.; Cammann, Jerry W.; Leary, Kevin D.; Link, Steven O.

    2008-09-29

    post-burn to determine changes in the gravel content of the surface layer so as to quantify inflationary or deflationary responses to fire and to reveal the ability of the surface to resist post-fire erosive stresses. Measures of bulk density, water repellency, water retention, and hydraulic conductivity will be used to characterize changes in infiltration rates and water storage capacity following the fire. Samples will also be analyzed to quantify geochemical changes including changes in soil pH, cation exchange capacity, specific surface area, and the concentration of macro nutrients (e.g. N, P, K) and other elements such as Na, Mg, Ca, that are critical to the post-fire recovery revegetation. Soil CO2 emissions will be measured monthly for one year following the burn to document post-fire stimulation of carbon turnover and soil biogenic emissions. Surface and subsurface temperature measurements at and near monitoring installations will be used to document fire effects on electronic equipment. The results of this study will be used to bridge the gaps in knowledge on the effects of fire on engineered ecosystems (e.g. surface barriers), particularly the hydrologic and biotic characteristics that govern the water and energy balance. These results will also support the development of practical fire management techniques for barriers that are compatible with wildfire suppression strategies. Furthermore, lessons learned will be use to develop installation strategies needed to protect electronic monitoring equipment from the intense heat of fire and the potential damaging effects of smoke and fire extinguishing agents. Such information is needed to better understand long-term barrier performance under extreme conditions, especially if site maintenance and operational funding is lost for activities such as barrier revegetation.

  19. 21 CFR 73.2646 - Bronze powder.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bronze powder. 73.2646 Section 73.2646 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The color additive bronze powder shall conform in identity and specifications to the requirements of §...

  20. Development of a Reproducible Powder Characterization Method using a Powder Rheometer

    DEFF Research Database (Denmark)

    Søgaard, Søren Vinter; Allesø, Morten; Garnæs, Jørgen;

    2012-01-01

    In this study, a powder rheometer was used to measure flow characteristics of two pharmaceutical model powders. Precise measurements were obtained for one of the model powders whereas the results were less precise for the second powder. In conclusion, further work is needed to increase the mechan...

  1. New Strategies for Powder Compaction in Powder-based Rapid Prototyping Techniques

    NARCIS (Netherlands)

    Budding, A.; Vaneker, Thomas H.J.

    2013-01-01

    In powder-based rapid prototyping techniques, powder compaction is used to create thin layers of fine powder that are locally bonded. By stacking these layers of locally bonded material, an object is made. The compaction of thin layers of powder mater ials is of interest for a wide range of

  2. Fire resistance properties of ceramic wool fiber reinforced intumescent coatings

    Energy Technology Data Exchange (ETDEWEB)

    Amir, N., E-mail: norlailiamir@petronas.com.my; Othman, W. M. S. W., E-mail: wamosa@gmail.com; Ahmad, F., E-mail: faizahmad@petronas.com.my [Mechanical Engineering Department, Universiti Teknologi PETRONAS Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia)

    2015-07-22

    This research studied the effects of varied weight percentage and length of ceramic wool fiber (CWF) reinforcement to fire retardant performance of epoxy-based intumescent coating. Ten formulations were developed using ammonium polyphosphate (APP), expandable graphite (EG), melamine (MEL) and boric acid (BA). The mixing was conducted in two stages; powdered materials were grinded in Rocklabs mortar grinder and epoxy-mixed using Caframo mixer at low speed mixing. The samples were applied on mild steel substrate and exposed to 500°C heat inside Carbolite electric furnace. The char expansion and its physical properties were observed. Scanning electron microscopy (SEM) analyses were conducted to inspect the fiber dispersion, fiber condition and the cell structure of both coatings and chars produced. Thermogravimetric analyses (TGA) were conducted to study the thermal properties of the coating such as degradation temperature and residual weight. Fire retardant performance was determined by measuring backside temperature of substrate in 1-hour, 1000°C Bunsen burner test according to UL 1709 fire regime. The results showed that intumescent coating reinforced with CWF produced better fire resistance performance. When compared to unreinforced coating, formulation S6-15 significantly reduced steel temperature at approximately 34.7% to around 175°C. However, higher fiber weight percentage had slightly decreased fire retardant performance of the coating.

  3. Contribution of peat fires to the 2015 Indonesian fires

    Science.gov (United States)

    Kaiser, Johannes W.; Heil, Angelika; Wooster, Martin J.; van der Werf, Guido R.

    2016-04-01

    Indonesia experienced widespread fires and severe air quality degradation due to smoke during September and October 2015. The fires are thought to have originated from the combination of El-Niño-induced drought and human activities. Fires ignited for land clearing escaped into drained peatlands and burned until the onset of the monsoonal rain. In addition to the health impact, these fires are thought to have emitted large amounts of greenhouse gases, e.g. more than Japan over the entire year. The Copernicus Atmosphere Monitoring Service (CAMS) has detected and quantified the fires with the Global Fire Assimilation System (GFAS) and the smoke dispersion with the Chemistry-Integrated Forecasting System (C-IFS) in near real time. GFAS and C-IFS are constrained by satellite-based observations of fire and smoke constituents, respectively. The distinction between peat and above-ground fires is a crucial and difficult step in fire emission estimation as it introduces errors of up to one order of magnitude. Here, we quantify the contribution of peat fires to the total emission flux of the 2015 Indonesian fires by (1) using an improved peat map in GFAS and (2) analysing the observed diurnal cycle of the fire activity as represented in a new development for GFAS. Furthermore, we link the fires occurrence to economic activity by analysing the coincidence with concessions for palm oil plantations and other industrial forest uses.

  4. Can climate change increase fire severity independent of fire intensity?

    Science.gov (United States)

    van Mantgem, P.; Nesmith, J.; Keifer, M.; Knapp, E.; Flint, A. L.; Flint, L. E.

    2013-12-01

    There is a growing realization that regional warming may be linked to increasing fire size and frequency in forests of the western US, a trend occurring in concert with increased fuel loads in forests that historically experienced frequent surface fires. Recent studies have also suggested that warming temperatures are correlated with increased fire severity (post-fire tree mortality). The mechanism whereby fire severity might increase in response to warming is presumed to be increasing probabilities of hazardous fire weather (higher air temperature, lower relative humidity and fuel moisture). While likely true, this view does not consider the biological context of the fire event. Here we present evidence that trees subject to environmental stress are more sensitive to subsequent fire damage. Tree growth records, used as an index of health for individuals, show that for two tree species (Abies concolor and Pinus lambertiana) in the Sierra Nevada of California poor growth leads to increased probabilities of mortality following fire. Plot-based fire monitoring databases from over 300 sites across the western US demonstrate that indices of drought stress are strongly predictive of post-fire tree survivorship. In sum, these results suggest that recent climatic trends may lead to a de facto increase in fire severity, even when there is no change in fire intensity.

  5. Analysis and experiment on air-ejecting for improving wind speed of pneumatic extinguisher%空气引射提高风力灭火机风速的分析与试验

    Institute of Scientific and Technical Information of China (English)

    李林书; 蒋梅胜; 何也能; 赵红利; 王顺喜

    2014-01-01

    A portable pneumatic extinguisher is an effective device that has been widely used for forest and grassland fire extinguishing in China. In order to enhance the effective range and rate of discharge of portable pneumatic extinguishers, a new method to weaken air velocity attenuation by increasing the flow rate using an air ejector was proposed and investigated in this study. This research belongs to the category of subsonic air ejector. First, the turbulivity of air jet“c”has been updated to the value of 0.106 by experiments. It is necessary to use this factor for the calculation of air velocity where 2.5 m downstream from the centrifugal fan which defined as u2.5. Experimental and the CFD (Computational Fluid Dynamics) methods are applied to investigate the influence on the performance of the air ejector. Three parameters were characterized:converging angle of entraining chamberθ;diameter of the mixing chamber Dm and the nozzle position (NXP) S. Up to 240 different models were established and meshed by Gambit 2.3, and then simulated and calculated by Fluent 6.3 with the turbulence model of RNG k-epsilon. Consequently, 240 different results containing the flow rate of nozzle outlet cross-section mp, the entrainment flow rate me, the flow rate of the mixing chamber outlet cross-section mc, and the air velocity of a mixing chamber outlet cross-section uc were acquired. Based on this data, the response surfaces for u2.5 and entrainment ratio that are used to investigate the interaction between Dm,θand S to u2.5 and entrainment ratio were established. The results indicated that the parameters Dm andθhave a great influence on u2.5 and entrainment ratio. It was also demonstrated that the interaction between Dm andθis significant. However, parameter S gave a relatively delicate influence on u2.5 and entrainment ratio, and also the interaction with the other parameters was weak. In addition, to find out the mechanism of interaction between Dm andθ, three groups of

  6. Global relationship of fire occurrence and fire intensity: A test of intermediate fire occurrence-intensity hypothesis

    Science.gov (United States)

    Luo, Ruisen; Hui, Dafeng; Miao, Ning; Liang, Chuan; Wells, Nicholas

    2017-05-01

    Fire plays a significant role in global atmosphere and biosphere carbon and nutrient cycles. Globally, there are substantially different distributions and impacts between fire occurrence and fire intensity. It is prominent to have a thorough investigation of global relationship between fire occurrence and fire intensity for future fire prediction and management. In this study, we proposed an intermediate fire occurrence-intensity (IFOI) hypothesis for the global relationship between fire occurrence and fire intensity, suggesting that fire occurrence changes with fire intensity following a humped relationship. We examined this hypothesis via satellite data from January 2001 to December 2013 at a global scale, and in small and large fire intensity zones, respectively. Furthermore, the fire occurrence and fire intensity relationship was developed among different vegetation types to reveal the changes of parameters and strengths. Finally, the environmental factors (including climatic, hydraulic, biological, and anthropogenic variables) underpinning the fire occurrence and intensity pattern were evaluated for the underlying mechanisms. The results supported our IFOI hypothesis and demonstrated that the humped relationship is driven by different causes among vegetation types. Fire occurrence increases with fire intensity in small fire intensity zones due to alleviation of the factors limiting both fire occurrence and intensity. Beyond a certain fire intensity threshold, fire occurrence is constrained, probably due to the limitation of available fuels. The information generated in this study could be helpful for understanding global variation of fire occurrence and fire intensity due to fire-vegetation-climate-human interactions and facilitating future fire management.

  7. Dry PMR-15 Resin Powders

    Science.gov (United States)

    Vannucci, Raymond D.; Roberts, Gary D.

    1988-01-01

    Shelf lives of PMR-15 polymides lengthened. Procedure involves quenching of monomer reactions by vacuum drying of PRM-15 resin solutions at 70 to 90 degree F immediately after preparation of solutions. Absence of solvent eliminates formation of higher esters and reduces formation of imides to negligible level. Provides fully-formulated dry PMR-15 resin powder readily dissolvable in solvent at room temperature immediately before use. Resins used in variety of aerospace, aeronautical, and commercial applications.

  8. Sphericizing metal powders by mechanical means

    Institute of Scientific and Technical Information of China (English)

    WANG Fu-xiang; GAI Guo-sheng; YANG Yu-fen

    2006-01-01

    A dry mechanical surface treatment was described,in which irregularly shaped metal powders were impacted and sphericized by using high speed airflow impact method particles composite system(PCS). The optimum technological parameters for the metal powders processed were determined according to the treatment effect under different conditions. The results show that the irregularly shaped metal powders are impacted into dense spherical particles,the bulk density and tap density of the metal powders increase noticeably. The combination property of metal powders is improved greatly.

  9. Phase diagram of crushed powders

    Science.gov (United States)

    Bodard, Sébastien; Jalbaud, Olivier; Saurel, Richard; Burtschell, Yves; Lapebie, Emmanuel

    2016-12-01

    Compression of monodisperse powder samples in quasistatic conditions is addressed in a pressure range such that particles fragmentation occurs while the solid remains incompressible (typical pressure range of 1-300 MPa for glass powders). For a granular bed made of particles of given size, the existence of three stages is observed during compression and crush up. First, classical compression occurs and the pressure of the granular bed increases along a characteristic curve as the volume decreases. Then, a critical pressure is reached for which fragmentation begins. During the fragmentation process, the granular pressure stays constant in a given volume range. At the end of this second stage, 20%-50% of initial grains are reduced to finer particles, depending on the initial size. Then the compression undergoes the third stage and the pressure increases along another characteristic curve, in the absence of extra fragmentation. The present paper analyses the analogies between the phase transition in liquid-vapour systems and powder compression with crush-up. Fragmentation diagram for a soda lime glass is determined by experimental means. The analogues of the saturation pressure and latent heat of phase change are determined. Two thermodynamic models are then examined to represent the crush-up diagram. The first one uses piecewise functions while the second one is of van der Waals type. Both equations of state relate granular pressure, solid volume fraction, and initial particle diameter. The piecewise functions approach provides reasonable representations of the phase diagram while the van der Waals one fails.

  10. Advances in powder diffraction analysis

    Energy Technology Data Exchange (ETDEWEB)

    Louer, D. [Lab. de Chimie du Solide et Inorganique Moleculaire, Rennes (France). Groupe de Cristallochimie

    1998-11-01

    Powder diffraction offers a wide spectrum of applications to solid-state scientists. The method traditionally used for phase analysis and the study of structural imperfections has benefited, in the last twenty years, from great advances in the instrumentation and computer-based approaches for pattern indexing and modelling. The factors at the origin of the metamorphosis of the method are presented. The major modern applications reported include quantitative analysis and the extraction of three-dimensional structural and microstructural properties. The use of pattern-fitting techniques for the characterization of the microstructure is discussed through applications to nanocrystalline materials. Remarkable results achieved in the solution of crystal structures are presented, as well as the impact in solid-state chemistry of powder crystallography, particularly for elucidating the crystal chemistry of families of compounds for which only powders are available. New strategies for solving the phase problem have been introduced and new classes of solids are being studied, such as drugs, coordination and organic compounds. (orig.) 100 refs.

  11. Assessment of sealed fire states by fire characteristic

    Institute of Scientific and Technical Information of China (English)

    YUAN Shu-jie; SZLAZAK Nikodem; OBRACAJ Dariusz

    2006-01-01

    The paper presented assessment of sealed fire states in underground coal mines by so-called "fire characteristic", which graphically described tendencies of fire gas components - oxygen, nitrogen, carbon dioxide, carbon monoxide and hydrocarbons - in time. In order to mark gas components tendencies in time the authors applied the time series analysis. The case studied confirmed, that analysis of fire gas components tendencies in time and their correlation allow to elicit proper conclusions about fire state assessment. Assessment of fire states based on single value of fire indexes without considering their trends in time and correlation between trends of gas components would give wrong results. The suggested method can appropriately indicate fire states in a sealed area.

  12. Fire phenomena and nonlinearity (II). Catastrophic fire dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Z. [University of Science and Technology, Hefei (China). State Key Laboratory of Fire Science

    2000-09-01

    As one of the most important non-linear mechanisms to cause fire or exacerbate fire disaster, there is a great deal of catastrophe behaviours existing in fire processes. The main tasks of the study of catastrophic fire dynamics are: 1) analysis of the catastrophe mechanisms of discontinuity behaviours in fire systems; 2) investigation of the controlling methods of discontinuity behaviours of fire system; 3) qualitative analysis of the dynamical characteristics of fire systems; and 4) catastrophe classifying of discontinuity phenomena in fire system. The other disciplines, such as physics, chemistry, biology, geoscience, astronomy, or even social sciences (for instance, political, economics, strategics and management science), may also take the similar method to establish the corresponding branch discipline of catastrophe science and catastrophe classification method. It is pointed out that an ignition behaviour of the uniform temperature thermal explosion system under the control of radiation has cusp catastrophe mechanism. 10 refs., 3 figs.

  13. 大型油罐区火灾风险严重度指数评价%Fire risk severity index assessment of large oil tank farm

    Institute of Scientific and Technical Information of China (English)

    任常兴; 李晋; 王婕; 毛星; 张欣; 王璐

    2012-01-01

    Against the high fire risk and extinguishing difficulty of large oil tank farm, the typical fire accident scenarios and accident frequency were analyzed and identified, and fire risk severity index was introduced to assess the relative fire risk level and rank. Moreover, estimation methods of specific risk severity index for pool-fire, tank-fire and VCE (vapor cloud explosion) were illustrated and described, and the example was assessed. This research provided a basis for oil storage tank area planning, management, accident prevention and emergency rescue.%针对大型油罐区火灾风险高、扑救难度大的特点,分析典型火灾事故场景及发生频率,引入火灾风险严重度指数来评价罐区火灾风险的相对影响水平和等级,给出池火、油罐火和蒸气云爆炸场景的火灾风险严重度指数评价方法,并以实例剖析.该研究可为大型油罐区火灾风险防范、消防规划和应急救援提供依据.

  14. USFA NFIRS 2013 Fire Incident & Cause Data

    Data.gov (United States)

    Department of Homeland Security — The 2013 Fire Causes & Incident data was provided by the U.S. Fire Administration’s (USFA) National Fire Data Center’s (NFDC’s) National Fire Incident Reporting...

  15. Solid State Digital Propulsion "Cluster Thrusters" For Small Satellites Using High Performance Electrically Controlled Extinguishable Solid Propellants (ECESP)

    Science.gov (United States)

    Sawka, Wayne N.; Katzakian, Arthur; Grix, Charles

    2005-01-01

    Electrically controlled extinguishable solid propellants (ESCSP) are capable of multiple ignitions, extinguishments and throttle control by the application of electrical power. Both core and end burning no moving parts ECESP grains/motors to three inches in diameter have now been tested. Ongoing research has led to a newer family of even higher performance ECESP providing up to 10% higher performance, manufacturing ease, and significantly higher electrical conduction. The high conductivity was not found to be desirable for larger motors; however it is ideal for downward scaling to micro and pico- propulsion applications with a web thickness of less than 0.125 inch/ diameter. As a solid solution propellant, this ECESP is molecularly uniform, having no granular structure. Because of this homogeneity and workable viscosity it can be directly cast into thin layers or vacuum cast into complex geometries. Both coaxial and grain stacks have been demonstrated. Combining individual propellant coaxial grains and/or grain stacks together form three-dimensional arrays yield modular cluster thrusters. Adoption of fabless manufacturing methods and standards from the electronics industry will provide custom, highly reproducible micro-propulsion arrays and clusters at low costs. These stack and cluster thruster designs provide a small footprint saving spacecraft surface area for solar panels and/or experiments. The simplicity of these thrusters will enable their broad use on micro-pico satellites for primary propulsion, ACS and formation flying applications. Larger spacecraft may find uses for ECESP thrusters on extended booms, on-orbit refueling, pneumatic actuators, and gas generators.

  16. The Intensification of Heat and Mass Transfer Processes in the Operating Condition of Automatic Fire Extinguishing Systems at Objects of Power

    Directory of Open Access Journals (Sweden)

    Vysokomornaya Olga V.

    2016-01-01

    Full Text Available Using the optical methods of “tracer” visualization “Particle Image Velocimetry” and “Interferometric Particle Imagine” were performed the experimental studies of the characteristics of evaporation of large single water droplets as they pass through the flames of flammable liquids – gasoline, kerosene, acetone, industrial alcohol, oil. Were determined the rates of evaporation of water under these conditions and the influence of droplet size, velocity of droplets and initial water temperature on the evaporation.

  17. On the fire extinguishing tests of typical Lithium-ion battery%典型锂离子电池火灾灭火试验研究

    Institute of Scientific and Technical Information of China (English)

    李毅; 于东兴; 张少禹; 胡群明; 刘欣; 王健强

    2015-01-01

    为研究不同灭火剂扑救锂离子电池火灾的有效性,以18650型钴酸锂锂离子电池为研究对象,开展了干粉、二氧化碳、水成膜泡沫灭火剂等不同灭火剂及细水雾扑救锂离子电池火灾的实体灭火试验.结果表明:二氧化碳、ABC干粉、3%的水成膜泡沫灭火剂均能有效扑灭18650型钴酸锂锂离子电池火灾的明火,但灭火后均出现复燃现象,出现复燃的时间与灭火剂的冷却能力成正比;而细水雾在灭火系统喷雾强度为2.0 L/(min·m2)、喷头安装高度为2.4m的条件下,无法有效抑制或扑灭18650型钴酸锂锂离子电池火灾.

  18. 残煤回采中防灭火方法的探讨%Discuss Defend and Extinguishing Fire's Method About Stores of Coal's Back of Getting Coal

    Institute of Scientific and Technical Information of China (English)

    王义

    2007-01-01

    残煤回采防灭火工作做得好与否,将直接影响回采工作的顺利进行,辽源矿井探索打肖火钻,接注泥管路,上闸阀控制注泥量的防灭火方法.将黄泥浆通过2寸注泥管路,注到采区发火点上的做法,使防灭火工作取得了很好效益.

  19. 关于简易自动喷水灭火系统的探讨%Discussion on Simplified Style Automatic Fire-Extinguishing Sprinkler System

    Institute of Scientific and Technical Information of China (English)

    梁磊

    2010-01-01

    根据自动喷水灭火系统的构成要素,结合目前我国的基本国情,提出适合于单多层建筑的简易自动喷水灭火系统.该系统不但可以提高单多层建筑的安全度,还可以降低成本,既安全又经济.

  20. Experimental study of building exterior thermal insulation materials stacking fire extinguishment%建筑外保温材料堆垛火灭火试验

    Institute of Scientific and Technical Information of China (English)

    侯耀华; 张福东; 李玉; 翟英鑫

    2015-01-01

    对常用外保温材料PU、XPS和EPS在堆垛火情况下进行灭火试验,试验在环境风速小于2 m/s的场所中进行.通过灭火剂直接喷射,获得ABC类干粉、直流水、水凝胶混合液和A类泡沫对不同保温材料的灭火和冷却效果.PU具有较XPS和EPS更短的引燃时间.对于PU堆垛火,干粉灭火剂和水具有较好的灭火性能.对于EPS堆垛火,水凝胶的灭火效果较好.外保温材料燃烧后应优先利用固定消防设施快速出水,控制火势.