WorldWideScience

Sample records for finish oli naissaare

  1. OLI 2.0

    DEFF Research Database (Denmark)

    Li, Xin; Gammelgaard, Jens; Feng, Liyun

    2013-01-01

    as they can explain the majority of the EM MNEs; and instead of rejecting them altogether, we should modify, extend and refine them by taking into account those challenging phenomena of the EM MNEs. In this paper, we take on Dunning’s OLI paradigm and present our redefinition effort. In what we call the OLI 2.0...... that the various writings of Stephen Hymer, the intellectual father of the IB field, have covered, explicitly or implicitly, most of the ideas of the three elements of our OLI 2.0 model. Therefore, the new OLI 2.0 model can be treated as partly a rediscovery of Hymer’s insights.......When it comes to the debate on whether the traditional theories of MNE and foreign direct investment (FDI) are adequate to account for the rise of emerging market (EM) MNEs, our stance is that although some EM MNEs do challenge the conventional wisdom, the existing theories are still valuable...

  2. Olie skaber fred i Sudan

    DEFF Research Database (Denmark)

    Laugesen, Henrik

    Sydsudan forventes formelt at erklære sin uafhængighed den 9. juli 2011. Men hvad sker der, når Sudan nu deles i Nordsudan og Sydsudan? Oliekilderne ligger i Sydsudan, men den helt nødvendige infrastruktur der skal transformere olie til dollars har man i nord. Da op imod 90% af Sydsudans indtægter...

  3. Development of OLI+S Entry Decision Model for Construction Firms in International Markets

    Directory of Open Access Journals (Sweden)

    Che Maznah Binti Mat Isa

    2017-12-01

    Full Text Available The paper aims to provide a holistic approach to address how construction firms make decisions covering all three domains (location, timing and mode across country, market, firm and project factors within the Ownership, Locational and Internalisation plus Specialty (OLI+S paradigm. Questionnaires were administered to 62 project managers based on a sampling frame provided by the Construction Industry Development Board Malaysia. The findings provide empirical and theoretical insights on how the OLI+S model addresses firms’ entry decisions to penetrate international markets. It suggests that the ownership-entry decision factors focus on firms’ internal transferable advantages. The locational-entry decision factors emphasise attractiveness of certain locations where firms decided to invest and operate. The internalisation– entry decision factors emphasise the extent to which firms were able to manipulate their internal competitive assets (firm’s resources and capabilities. Finally, the specialty-entry decision factors emphasise on firms’ competency in project management and specialist expertise to handle complex projects based on their previous project experience. An example of construction firms’ unique characteristics, namely, specialty advantages based on the original Dunning’s OLI eclectic paradigm has been adopted. The established OLI+S entry decision model could be investigated to further refine other related internationalisation theory.

  4. Mis oli ÜEKS? / Janika Kronberg

    Index Scriptorium Estoniae

    Kronberg, Janika, 1963-

    2010-01-01

    Ülemaailmsest Eesti Kirjanduse Seltsist. Seltsi eesmärgiks oli ühendada eesti pagulasorganisatsioonide pingutused ja luua alus vaimsele arengule. Asutamiskoosolek toimus 10. oktoobril 1948. Seltsi esimeheks valiti Henrik Visnapuu. Dateerimata üleskutse koopia. Üleskutse teksti autor Henrik Visnapuu. Teistkordselt asutati ÜEKS New Yorgis 28. aprillil 1950. ÜEKSi tegevusest Kanadas

  5. Blair oli ikkagi seotud Kelly nime lekitamisega / Maris Lillak

    Index Scriptorium Estoniae

    Lillak, Maris, 1970-

    2003-01-01

    Suurbritannia kaitseministeeriumi relvaeksperdi David Kelly surmaga seotud asjaolusid uuriv Huttoni komisjon selgitas, et peaminister Tony Blair oli kohtumisel, kus otsustati relvaeksperdi nime avalikustamine

  6. Hemingway oli KGB, filmistaar Errol Flynn natside agent? / Tõnis Erilaid

    Index Scriptorium Estoniae

    Erilaid, Tõnis, 1943-

    2009-01-01

    John Earl Haynes, Harvey Klehr ja Alexander Vassiliev väidavad oma raamatus "Spies : The Rise and Fall of the KGB in America", et Ernest Hemingway oli 1940ndail aastail KGB ning Errol Flynn 1930ndatel aastatel natside agent

  7. Lugu mehest, kes oli iseenda naine / Kaja Roomets

    Index Scriptorium Estoniae

    Roomets, Kaja

    2008-01-01

    Doug Wrighti "Ma olen iseenda naine" Endla teatris, lavastaja Tiit Palu. Esietendus 27. juunil. Lisaks saksa päritolu transvestiidist Charlotte von Mahlsdofist (1928-2002) : "Charlotte oli fenomen" ja Kati Murutari ning Raivo Järvi arvamus : "Mis tunde esietenduselt kaasa saite?"

  8. Invloed van minerale olie op de bestrijding van Phytophthora infestans in pootaardappelen

    NARCIS (Netherlands)

    Spits, H.G.; Bus, C.B.

    2003-01-01

    De invloed van toevoeging van olie aan een fungicide op de werking van het fungicide is afhankelijk van het gebruikte fungicide. Gezamenlijk spuiten van olie en Aviso DF, Curzate M en mogelijk ook Acrobat, verhoogt de curatieve werking van deze fungiciden. Gezamenlijk spuiten van olie en Aviso DF,

  9. Plutonium Finishing Plant

    Data.gov (United States)

    Federal Laboratory Consortium — The Plutonium Finishing Plant, also known as PFP, represented the end of the line (the final procedure) associated with plutonium production at Hanford.PFP was also...

  10. [Estimation of vegetation water content from Landsat 8 OLI data].

    Science.gov (United States)

    Zheng, Xing-ming; Ding, Yan-ling; Zhao, Kai; Jiang, Tao; Li, Xiao-feng; Zhang, Shi-yi; Li, Yang-yang; Wu, Li-li; Sun, Jian; Ren, Jian-hua; Zhang, Xuan-xuan

    2014-12-01

    The present paper aims to analyze the capabilities and limitations for retrieving vegetation water content from Landsat8 OLI (Operational Land Imager) sensor-new generation of earth observation program. First, the effect of soil background on canopy reflectance and the sensitive band to vegetation water content were analyzed based on simulated dataset from ProSail model. Then, based on vegetation water indices from Landsat8 OLI and field vegetation water content during June 1 2013 to August 14 2013, the best vegetation water index for estimating vegetation water content was found through comparing 12 different indices. The results show that: (1) red, near infrared and two shortwave infrared bands of OLI sensor are sensitive to the change in vegetation water content, and near infrared band is the most sensitive one; (2) At low vegetation coverage, solar radiation reflected by soil background will reach to spectral sensor and influence the relationship between vegetation water index and vegetation water content, and simulation results from ProSail model also show that soil background reflectance has a significant impact on vegetation canopy reflectance in both wet and dry soil conditions, so the optimized soil adjusted vegetation index (OSAVI) was used in this paper to remove the effect of soil background on vegetation water index and improve its relationship with vegetation water content; (3) for the 12 vegetation water indices, the relationship between MSI2 and vegetation water content is the best with the R-square of 0.948 and the average error of vegetation water content is 0.52 kg · m(-2); (4) it is difficult to estimate vegetation water content from vegetation water indices when vegetation water content is larger than 2 kg · m(-2) due to spectral saturation of these indices.

  11. Wall Finishes; Carpentry: 901895.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The course outline is designed to provide instruction in selecting, preparing, and installing wall finishing materials. Prerequisites for the course include mastery of building construction plans, foundations and walls, and basic mathematics. Intended for use in grades 11 and 12, the course contains five blocks of study totaling 135 hours of…

  12. Drywall Finishing Manual.

    Science.gov (United States)

    Lengert, Gerald

    This manual, a self-study guide for apprentices in the drywall finishing trade in British Columbia, attempts to establish standards for the trade. It tells how to produce a properly taped and filled drywall surface and describes what that surface should look like. The standards emphasize quality work that can be realistically achieved on the job.…

  13. Finishing with invisalign.

    Science.gov (United States)

    Duong, Trang; Kuo, Eric

    2006-01-01

    Finishing in orthodontics can be challenging and can involve use of various techniques and armamentarium. This article reports a study that evaluates a procedure for using a thicker Aligner at the end of treatment to aide in finishing and also to determine if this would reduce the need for additional "case refinement" Aligners at the end of treatment. Align Technology has developed the Invisalign System, which is a series of clear plastic appliances ("aligners") that move the patient's teeth in small increments from their original state to a final, treated state. The Invisalign System uses a computer as a tool to assist in creating a series of sequential movements to assure light and consistent forces on the patient's teeth.

  14. Analysis of Coastline Extraction from Landsat-8 OLI Imagery

    Directory of Open Access Journals (Sweden)

    Yaolin Liu

    2017-10-01

    Full Text Available Coastline extraction is a fundamental work for coastal resource management, coastal environmental protection and coastal sustainable development. Due to the free access and long-term record, Landsat series images have the potential to be used for coastline extraction. However, dynamic features of different types of coastlines (e.g., rocky, sandy, artificial, caused by sea level fluctuation from tidal, storm and reclamation, make it difficult to be accurately extracted with coarse spatial resolution, e.g., 30 m, of Landsat images. To access this problem, we analyze the performance of coastline extraction by integrating downscaling, pansharpening and water index approaches in increasing the accuracy of coastline extraction from the latest Landsat-8 Operational Land Imager (OLI imagery. In order to prove the availability of the proposed method, we designed three strategies: (1 Strategy 1 uses the traditional water index method to extract coastline directly from original 30 m Landsat-8 OLI multispectral (MS image; (2 Strategy 2 extracts coastlines from 15 m fused MS images generated by integrating 15 m panchromatic (PAN band and 30 m MS image with ten pansharpening algorithms; (3 Strategy 3 first downscales the PAN band to a finer spatial resolution (e.g., 7.5 m band, and then extracts coastlines from pansharpened MS images generated by integrating downscaled spatial resolution PAN band and 30 m MS image with ten pansharpening algorithms. Using the coastline extracted from ZiYuan-3 (ZY-3 5.8 m MS image as reference, accuracies of coastlines extracted from MS images in three strategies were validated visually and quantitatively. The results show that, compared with coastline extracted directly from 30 m Landsat-8 MS image (strategy 1, strategy 3 achieves the best accuracies with optimal mean net shoreline movement (MNSM of −2.54 m and optimal mean absolute difference (MAD of 11.26 m, followed by coastlines extracted in strategy 2 with optimal MNSM

  15. S&P: meie kohus oli USA riigireitingut alandada / Heiki Suurkask

    Index Scriptorium Estoniae

    Suurkask, Heiki, 1972-

    2011-01-01

    Standard & Poor´s langetas USA reitingut tasemelt AAA tasemeni AA+. Agentuuri esindaja sõnul oli reitingu alandamine nende kohustus, sest nende arvates oli USA senine reiting liiga kõrge. Hiina nõuab, et USA hakkaks oma võlaprobleemiga tegelema. AAA reiting on nüüd vaid 15 riigil või territooriumil maailmas

  16. Elicitin-like proteins Oli-D1 and Oli-D2 from Pythium oligandrum trigger hypersensitive response in Nicotiana benthamiana and induce resistance against Botrytis cinerea in tomato.

    Science.gov (United States)

    Ouyang, Zhigang; Li, Xiaohui; Huang, Lei; Hong, Yongbo; Zhang, Yafen; Zhang, Huijuan; Li, Dayong; Song, Fengming

    2015-04-01

    The biocontrol agent Pythium oligandrum and its elicitin-like proteins oligandrins have been shown to induce disease resistance in a range of plants. In the present study, the ability of two oligandrins, Oli-D1 and Oli-D2, to induce an immune response and the possible molecular mechanism regulating the defence responses in Nicotiana benthamiana and tomato were investigated. Infiltration of recombinant Oli-D1 and Oli-D2 proteins induced a typical immune response in N. benthamiana including the induction of a hypersensitive response (HR), accumulation of reactive oxygen species and production of autofluorescence. Agrobacterium-mediated transient expression assays revealed that full-length Oli-D1 and Oli-D2 were required for full HR-inducing activity in N. benthamiana, and virus-induced gene silencing-mediated knockdown of some of the signalling regulatory genes demonstrated that NbSGT1 and NbNPR1 were required for Oli-D1 and Oli-D2 to induce HR in N. benthamiana. Subcellular localization analyses indicated that both Oli-D1 and Oli-D2 were targeted to the plasma membrane of N. benthamiana. When infiltrated or transiently expressed in leaves, Oli-D1 and Oli-D2 induced resistance against Botrytis cinerea in tomato and activated the expression of a set of genes involved in the jasmonic acid/ethylene (JA/ET)-mediated signalling pathway. Our results demonstrate that Oli-D1 and Oli-D2 are effective elicitors capable of inducing immune responses in plants, probably through the JA/ET-mediated signalling pathway, and that both Oli-D1 and Oli-D2 have potential for the development of bioactive formulae for crop disease control in practice. © 2014 BSPP AND JOHN WILEY & SONS LTD.

  17. "Alguses oli tema üksinda, sest oli küll..." : [luuletused] / Kabir ; tlk. Doris Kareva

    Index Scriptorium Estoniae

    Kabir

    2006-01-01

    Sisu: "Alguses oli tema üksinda, sest oli küll..." ; "Kõik loodud on Kõiksuse poolt..." ; "Otsid Sa mind?..." ; "Kabir oma meele puhtaks..." ; "Pole pühades järvedes midagi muud peale vee..." ; "Otsisin kelme ja kõveraid..." ; "Ütle, vend, mida küll teha..." ; "Mis kurja on teinud su juuksed..." ; "Ära tõuse, et minna õue vaatama lilli..." ; "Sinu sünd inimesena on küps vili..." ; "Öö saatsid sa magades mööda..." ; "Pole ma hindu..." ; "Ma vaatan sind..." ; "Veskikivisid vaadeldes ; "Nähes aednikku lähenemas, õhkasid pungad..." ; "Tasa, tasa tõtta, mu meel..." ; "Ära kurvasta..." ; "Imetlusväärne on teemant..." ; "Kuula, sõber, see keha on Tema lüüra..." ; "Nagu seemnes varjul on õli..." ; "Olgugi ookean leekides..." ; "Tilka, mis lahustub meres..." ; "Jõgi ja lained on üks..." ; "Kes sa oled ja kust oled tulnud?..." ; "Kaovad kuningad, kauneimad kuningannad..." ; "Rohkem kui midagi muud..." ; "Lihalik, surelik tantsib selle ees..." ; "Väike rubiin, mida igaüks ihkab..." ; "Mine heade juurde, kus Armastatugi elab..." ; "Eksitus sulgeb väravad..." ; "Keelilt vallandub helisid..." ; "Kõik algab lahusoleku valust..." ; "Ärka, sõber! Miks ikka veel magad?..." ; "Kuu on mu kehas, kuid ise ma seda ei näe..." ; "Miks oled nii kärsitu, süda?..." ; "Kellele kuulub see flööt..." ; "Kui raske on Külalist kohata!..." ; "Kandetool toodi minule järgi mu isakoju..." ; "Siia ilma sündides nutsid..." ; "Oh mu süda! Ei jõudnud sa tundma õppida..." ; "Õige kulunud on sinu rüü..." ; "Õhkõrn on see õhuke rüü..." ; "Lipp, mida keegi ei näe..." ; "Oh otsija, lihtne liit lähim on südamele..." ; "Õhtu varjud on sügavaks saanud..." ; "Kuis saakski katkeda armastus me kahe vahel..." ; "Luik, tahaksin, et mulle räägiksid kõik oma loo..." ; "Kuhu ihaled küll, minu süda?..." ; "Ei lakka Lõpmatu flöödiheli..." ; "Mida näed, seda pole...". Autori kohta eluloolisi andmeid lk. 11

  18. De vorming van monoterpenen en pentadekanolide in de vluchtige olie van angelica archangelica L.

    NARCIS (Netherlands)

    Klouwen, Marten Herman

    1961-01-01

    In dit proefschrift is een poging gedaan bij een plant met schizogene oliegangen iets over de verhouding der terpenen in de olie in verschillende stadia te weten te komen. Als proefplant werd hiertoe Angelica archangelica L gekozen........... .... Zie: Samenvatting

  19. Alguses oli Arvo Pärdi muusika ja siis tulid Jalakas ja videokunstnikud / Tiiu Laks

    Index Scriptorium Estoniae

    Laks, Tiiu, 1984-

    2010-01-01

    Tõnu Kaljuste ja Peeter Jalaka lavastusest "Alguses oli", lavastuse aluseks Arvo Pärdi teosed "In Principio" ja "Miserere", 17. augustil Noblesse valukojas toimunud etendusest, muusikaline juht Tõnu Kaljuste

  20. Alguses oli: Arvo Pärdi juubelikuu algas etendusega Noblessi valukojas

    Index Scriptorium Estoniae

    2010-01-01

    Tõnu Kaljuste ja Peeter Jalaka lavastusest "Alguses oli", lavastuse aluseks Arvo Pärdi teosed "In Principio" ja "Miserere", 17. augustil Noblesse valukojas toimunud etendusest, muusikaline juht Tõnu Kaljuste

  1. Murrang Prantsuse Idaeuroopa liidupoliitikas 1924-1927 : kas oli olemas Balti paralleel? / Kalervo Hovi

    Index Scriptorium Estoniae

    Hovi, Kalervo, 1942-

    2008-01-01

    Prantsusmaa uue poliitilise suuna eesmärgiks oli kollektiivse julgeolekusüsteemi loomine Rahvasteliidu raames. Loodeti piiririikide, s. t. ka Baltimaade, liitumist Prantsusmaa poolt juhitava kollektiivse julgeoleku rühmaga Rahvasteliidus

  2. Landsat 8 Operational Land Imager (OLI)_Thermal Infared Sensor (TIRS) V1

    Data.gov (United States)

    National Aeronautics and Space Administration — Abstract:The Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) are instruments onboard the Landsat 8 satellite, which was launched in February of...

  3. Vitrified metal finishing wastes

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, P.A. [Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)]. E-mail: p.a.bingham@sheffield.ac.uk; Hand, R.J. [Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

    2005-03-17

    Durable phosphate glasses were formed by vitrifying waste filter cakes from two metal finishing operations. Some melts formed crystalline components during cooling. Compositional analysis of dried, heat treated and vitrified samples was made using energy-dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy, inductively-coupled plasma spectroscopy and Leco induction furnace combustion analysis. Hydrolytic dissolution, measured by an adapted product consistency test, was reduced by up to 3 orders of magnitude upon heat treatment or vitrification, surpassing the performance of borosilicate glass in some cases. This was attributed to the high levels of iron and zinc in the wastes, which greatly improve the durability of phosphate glasses. One of the wastes arose from a metal phosphating process and was particularly suitable for vitrification due to its high P{sub 2}O{sub 5} content and favourable melting behaviour. The other waste, which arose from a number of processes, was less suitable as it had a low P{sub 2}O{sub 5} content and during heating it emitted harmful corrosive gases and underwent violent reactions. Substantial volume reductions were obtained by heat treatment and vitrification of both wastes. Compositions and performances of some vitrified wastes were comparable with those of glasses which are under consideration for the immobilisation of toxic and nuclear wastes.

  4. Automation in tube finishing bay

    International Nuclear Information System (INIS)

    Bhatnagar, Prateek; Satyadev, B.; Raghuraman, S.; Syama Sundara Rao, B.

    1997-01-01

    Automation concept in tube finishing bay, introduced after the final pass annealing of PHWR tubes resulted in integration of number of sub-systems in synchronisation with each other to produce final cut fuel tubes of specified length, tube finish etc. The tube finishing bay which was physically segregated into four distinct areas: 1. tube spreader and stacking area, 2. I.D. sand blasting area, 3. end conditioning, wad blowing, end capping and O.D. wet grinding area, 4. tube inspection, tube cutting and stacking area has been studied

  5. RAČUNALNIŠTVO V OBLAKU IN PRIMERI PRESKUSOV GOOGLE APPS. V OSNOVNI ŠOLI

    OpenAIRE

    Krapež, Domen

    2013-01-01

    Diplomska naloga obravnava računalništvo v oblaku in primere preskusov Google Apps v osnovni šoli na konkretnih primerih. Za potrebe naloge so podrobno opisane storitve, Gmail, Google Calendar, Google Docs ter Google Drive. V eksperimentalnem delu naloge je bila izvedena analiza uporabe Google Apps pred in po uporabi aplikacije v osnovni šoli. Rezultati vprašalnika so pokazali, da je pot do uspešne integracije novih tehnologij še dolga ter da mora izobraževanje kadrov potekati postopoma. R...

  6. Ühendpartei Res Publica tiib oli häältekogumisel Isamaast pisut edukam

    Index Scriptorium Estoniae

    2007-01-01

    Ühenderakonna Res Publica tiiva kandidaadid said Riigikogu valimistel umbes tuhat häält rohkem kui Isamaaliidu tiiva kandidaadid, samas oli IRL-i valimisnimekirjas Res Publica tiiva kandidaate ka mõne inimese võrra rohkem. Isamaaliidu edukaimad hääletoojad

  7. Nord Streami suhtekorraldaja oli seotud kõrge valitsusametnikuga / Anneli Ammas

    Index Scriptorium Estoniae

    Ammas, Anneli, 1962-

    2007-01-01

    Valitsuse kommunikatsioonibüroo direktor Inga Jagomäe müüs võimalike süüdistuste vältimiseks oma osaluse PR-firmas, mis oli seotud Nord Streami suhtekorraldajaga Eestis. Kommenteerivad Inga Jagomäe: Millised said minu huvid olla? ja Ivo Rull: Tegu on ilmselge huvide konfliktiga. Skeem: Nord Streami suhtekorraldus

  8. Alguses oli HELI ja PÄRT, siis Jalaka LAVASTUS / Riina Luik

    Index Scriptorium Estoniae

    Luik, Riina, 1962-

    2010-01-01

    Tõnu Kaljuste ja Peeter Jalaka lavastusest "Alguses oli", lavastuse aluseks Arvo Pärdi teosed "In Principio" ja "Miserere", 17. augustil Noblesse valukojas toimunud etendusest, muusikaline juht Tõnu Kaljuste. Arvo Pärdi pidunädalate ürituste loetelu

  9. Kikase lasteaia kogemustest oli Euroopale kasu / Pärje Ülavere

    Index Scriptorium Estoniae

    Ülavere, Pärje

    2010-01-01

    Tallinna Kikase lasteaed osales Eesti, Hispaania, Belgia ja Inglismaa haridusasutuste koostöös 2008–2010 toimunud Comeniuse projektis „A view through the European window”. Projekti peaeesmärk oli jagada teadmisi oma maa loodusest ja keskkonnast

  10. Ocean Color Measurements from Landsat-8 OLI using SeaDAS

    Science.gov (United States)

    Franz, Bryan Alden; Bailey, Sean W.; Kuring, Norman; Werdell, P. Jeremy

    2014-01-01

    The Operational Land Imager (OLI) is a multi-spectral radiometer hosted on the recently launched Landsat-8 satellite. OLI includes a suite of relatively narrow spectral bands at 30-meter spatial resolution in the visible to shortwave infrared that make it a potential tool for ocean color radiometry: measurement of the reflected spectral radiance upwelling from beneath the ocean surface that carries information on the biogeochemical constituents of the upper ocean euphotic zone. To evaluate the potential of OLI to measure ocean color, processing support was implemented in SeaDAS, which is an open-source software package distributed by NASA for processing, analysis, and display of ocean remote sensing measurements from a variety of satellite-based multi-spectral radiometers. Here we describe the implementation of OLI processing capabilities within SeaDAS, including support for various methods of atmospheric correction to remove the effects of atmospheric scattering and absorption and retrieve the spectral remote-sensing reflectance (Rrs; sr exp 1). The quality of the retrieved Rrs imagery will be assessed, as will the derived water column constituents such as the concentration of the phytoplankton pigment chlorophyll a.

  11. Improvements to the Ontology-based Metadata Portal for Unified Semantics (OlyMPUS)

    Science.gov (United States)

    Linsinbigler, M. A.; Gleason, J. L.; Huffer, E.

    2016-12-01

    The Ontology-based Metadata Portal for Unified Semantics (OlyMPUS), funded by the NASA Earth Science Technology Office Advanced Information Systems Technology program, is an end-to-end system designed to support Earth Science data consumers and data providers, enabling the latter to register data sets and provision them with the semantically rich metadata that drives the Ontology-Driven Interactive Search Environment for Earth Sciences (ODISEES). OlyMPUS complements the ODISEES' data discovery system with an intelligent tool to enable data producers to auto-generate semantically enhanced metadata and upload it to the metadata repository that drives ODISEES. Like ODISEES, the OlyMPUS metadata provisioning tool leverages robust semantics, a NoSQL database and query engine, an automated reasoning engine that performs first- and second-order deductive inferencing, and uses a controlled vocabulary to support data interoperability and automated analytics. The ODISEES data discovery portal leverages this metadata to provide a seamless data discovery and access experience for data consumers who are interested in comparing and contrasting the multiple Earth science data products available across NASA data centers. Olympus will support scientists' services and tools for performing complex analyses and identifying correlations and non-obvious relationships across all types of Earth System phenomena using the full spectrum of NASA Earth Science data available. By providing an intelligent discovery portal that supplies users - both human users and machines - with detailed information about data products, their contents and their structure, ODISEES will reduce the level of effort required to identify and prepare large volumes of data for analysis. This poster will explain how OlyMPUS leverages deductive reasoning and other technologies to create an integrated environment for generating and exploiting semantically rich metadata.

  12. Savisaare suvila väärtus oli 1,2 miljonit suurem / Jaanus Piirsalu

    Index Scriptorium Estoniae

    Piirsalu, Jaanus, 1973-

    2006-01-01

    Ekspertiisi kohaselt müüs kinnisvarafirma Kalev REC Keila-Joa suvilad Edgar Savisaare firmale Fixor Holding ja Raimond Kägu firmale Marriot nende turuväärtusest odavamalt. Kalev REC-i juhatuse liige Peeter Lillestik ja üks omanikke Oliver Kruuda kinnitasid, et tegemist oli poliitikule mõeldud spetsiaalselt madalama hinnaga. Justiitsminister Rein Langi arvamus. Lisad: Suvilamüüjate kasum 17 miljonit; Savisaared lubasid täna vastata

  13. Veerenni asumi süda oli Lutheri vabrik / Robert Nerman

    Index Scriptorium Estoniae

    Nerman, Robert, 1946-2015

    2008-01-01

    Tallinna kesklinnas Pärnu maantee, Tallinn-Narva raudtee ja Siselinna kalmistu vahel asuva piirkonna ajaloost. Lutheri puidutööstuse rajamisest. Hooned projekteeris arhitekt Erwin Bernhard. Juugendstiilis rahvamaja arhitektid olid Herman Gesellius, Armas Lindgren ja Eliel Saarinen. Keskhaigla töötajatele Herne tänavale rajatud elamute ning Tallinna Ühisgümnaasiumi hoone arhitekt oli Herbert Johanson

  14. Soome kuulsad teatraalid hõivasid oma uuslavastuse jaoks Naissaare

    Index Scriptorium Estoniae

    2008-01-01

    Naissaarel Omari küünis esietendub 7. juulil Nargen festivali raames Kristian Smedsi lavastus "Jumal on ilu" Oulus elanud kunstniku Vilho Lammi elust. Lavastus tugineb Paavo Rintala samanimelisele romaanile. Lavastuses osalevad peamiselt Soome Rahvusteatri näitlejad

  15. Raimond Valgre noorem vend - kes ta oli? : Kuno-Enn Valgre (30.05.1918-02.03.1987) / Valdur Ohmann

    Index Scriptorium Estoniae

    Ohmann, Valdur, 1958-

    2011-01-01

    Vastukäivad andmed ärgitasid uurima, kes õigupoolest oli Valgre noorem vend. Kõige ehedamalt annab Enn Valgre sõjaaegse käekäigu edasi ülekuulamisprotokoll 11. novembrist 1944. Ülekuulamisprotokolli tekst

  16. International innovations in optical finishing

    Science.gov (United States)

    Jacobs, Stephen D.

    2004-10-01

    Every few years new polishing technologies attempt to make the transition from the research laboratory into the commercial sector. Success awaits any process that is well controlled and predictable (e.g., deterministic), rapid, capable of smoothing to sub-nm rms roughness levels while removing damage from grinding, affordable, and easily implemented. Applicability to different optical materials and a variety of part sizes and shapes is extremely important, but may not be required for a new technology to succeed in a niche market. This paper reviews six innovations in polishing of precision optics: Canon"s Super-Smooth Polisher (CSSP) that uses a sub-aperture pitch lap - a relatively mature but important base-line technology; Nikon / Osaka University"s RF Plasma Chemical Vaporization Machining (CVM); Epion"s Gas Cluster Ion Beam (GCIB) Process; the IOM University of Leipzig / NTGL Ion Beam Finishing (IBF) Technology; Zeeko"s "Precessions" Process with a sub-aperture section of an inflatable pad; and QED Technology"s Magnetorheological Finishing (MRF) with a magnetic fluid ribbon. The removal mechanism and some recent achievements for each process are discussed.

  17. Print Finishing: From Manual to Automated Print Finishing

    Directory of Open Access Journals (Sweden)

    Gareth Ward

    2004-12-01

    Full Text Available Meeting the demand for faster turnrounds and shorter print runs goes beyond making the printing press easier to set up and change. There is little point in producing plates and then sheets from a press if the post press area does not change to keep abreast of developments in prepress and the print room. The greatest impact is going to come from JDF, the end to end production data format which is finding wide spread acceptance in print areas. To date finishing equipment manufacturers are not as well represented within the CIP4 organisation as prepress and press vendors, but the major manufacturers are members. All are working to the goal of complete connectivity.The idea of JDF is that if the format of a print product like a magazine is known during the creation phases, the information can be used to preset machinery that is going to be used to produce it, so avoiding input errors and saving manufacturing time.A second aspect to JDF is that information about performance and progress is gathered and can be retrieved from a central point or made available to a customer. Production scheduling and costing becomes more accurate and customer relationships are deepened. However JDF to its fullest extent is not yet in use in connecting the finishing area to the rest of the printing plant. Around the world different companies are testing the idea of JDF to connect saddle stitchers, guillotines and binders with frantic work underway to be able to show results soon.

  18. Innovative Deterministic Optical Surface Finishing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Increasing the optical surface finishing precision and reducing surface roughness will greatly benefit astronomy telescope and other optical systems. Conventional...

  19. Pra Desain Pabrik Lube Base Oil dari Oli Bekas dengan Proses Ekstraksi Solvent

    Directory of Open Access Journals (Sweden)

    Amirut Tahfifah

    2017-01-01

    Full Text Available Minyak pelumas dasar  merupakan bahan baku dari pembuatan minyak pelumas atau oli yang digunakan untuk berbagai jenis permesinan baik berat maupun ringan. Sebagian besar pelumas terdiri dari lube base oil 80% dan 20% merupakan aditive. Minyak pelumas, baik yang berasal dari ekstraksi  crude oil atau yang berasal dari minyak sintetis telah digunakan secara luas dalam dunia industri, dari proses pelumasan, transfer panas, metal cutting dan sebagainya. Dari proses pengaplikasian tersebut, minyak pelumas yang digunakan  akan terkontaminasi dan atau terdegradasi. Minyak inilah yang selanjutnya disebut minyak pelumas bekas (used oil. Hal ini secara otomatis memunculkan permasalahan baru dengan hadirnya limbah minyak peIumas atau oli bekas yang sangat melimpah tersebut. sehingga akan berdampak bagi kesehatan dan lingkungan. Minyak pelumas bekas mengandung sejumlah zat yang bisa mengotori udara, tanah, dan air. Di Indonesia terdapat beberapa perusahaaan yang telah memproduksi minyak pelumas dari baik dari crude oil maupun dari oli bekas. Menurut Kemenperin (2008 - 2012, impor lube base oil ataupun minyak pelumas terus mengalami peningkatan. Melihat banyaknya penggunaan minyak pelumas bekas yang tersedia di Indonesia dan kebutuhan akan minyak pelumas yang semakin meningkat, maka direncanakan akan didirikan pabrik pengolohan lube base oil (minyak pelumas dasar dari oli bekas. Selain untuk memenuhi kebutuhan, proses ini juga untuk mengurangi jumlah limbah oli bekas yang merupakan limbah B3. Terdapat beberapa  proses pembuatan minyak pelumas dasar dari oli bekas ini, diantaranya proses hidrotreathing dan ekstraksi solvent. Pada proses hidrotreathing, minyak pelumas dasar dipisahkan dari fraksi unsaturated melalui reaksi hidrogenasi. Pada proses ini digunakan gas hidrogen. Sedangkan pada proses ekstraksi solvent, minyak pelumas bekas diekstraksi menggunakan pelarut organik untuk memisahkan fraksi minyak pelumas dasar dan unsaturated/sludge nya. Dari

  20. Õpilaste etlemiskonkurss oli pühendatud lastekirjanikele / Maria Kinnunen

    Index Scriptorium Estoniae

    Kinnunen, Maria

    2008-01-01

    Toimus maakondlik etlemiskonkurss "Tahan sulle öelda...", mis oli tänavu pühendatud lastekirjanikele. IV-VI klassi õpilaste seast paistsid silma Maris Lutsar, Eleriin Käo, Nalong Norman Seeba ja Liisa Lutter, eripreemia murdeluule esitamise eest sai Evely Roositalu, ära märgiti ka Jaanika Sonberg, Sirli Kooskora ja Kalev Laar. VII-IX klass arvestuses moodustasid esikolmiku Ingrid Änilane, Greta Pentsa ja Eero Sonberg. Gümnaasiumiastmes võitis Eliisa Seedre, teist ja kolmandat kohta jagasid Andre Sikkal ja Kätlin Piiri. Ära märgiti ka Eneli Valsi, Tõnis Kattai ja Priit Andrejev

  1. Finishability of CCA pressure-treated wood

    Science.gov (United States)

    Alan Ross; Richard Carlson; William Feist; Steven Bussjaeger

    2000-01-01

    Thus, a need arose for the development of surface finishes for CCA-treated wood that could address the special requirements of this substrate and provide protection against the ravages of water, sunlight, mildew, and other aspects of weathering and wear. Initially, this need was not addressed, most wood preserving companies had little expertise in surface finishes and...

  2. 27 CFR 25.231 - Finished beer.

    Science.gov (United States)

    2010-04-01

    ... not purchase taxpaid or tax determined beer from another brewer in bottles or cans which bear the name... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Finished beer. 25.231... OF THE TREASURY LIQUORS BEER Beer Purchased From Another Brewer § 25.231 Finished beer. (a) A brewer...

  3. FON: From Start to Finish

    Science.gov (United States)

    Pakuliak, L. K.; Andruk, V. M.; Golovnia, V. V.; Shatokhina, S. V.; Yizhakevych, O. M.; Ivanov, G. A.; Yatsenko, A. I.; Sergeeva, T. P.

    Almost 40-year history of FON project ended with the creation of the whole northern sky catalog of objects down to B ≤ 16.5m. The idea of 4-fold overlapping of the northern sky with 6 wide-field astrographs has not been realized in full. For historical reasons it has been transformed into the 2-fold overlapping observational program of MAO NAS of Ukraine, resulted in three versions of the multimillion catalog of positions, proper motions, and B-magnitudes of stars. The first version of 1.2 million stars had been finished before the 2000s and is based on the AC object list. The measurements of plates were made by automatic measuring complex PARSEC, specially developed for massive photographic reviews. As the input list was limited by AC objects, the most part of stars on the FON plates remained unmeasured. Principles of workflow organization of such works formed the basis for the further development of the project using the latest IT-technologies. For the creation of the second and the third versions of the catalog, the list of objects was obtained as a result of total digitizing of plates and their image processing. The final third version contains 19.5 million stars and galaxies with the maximum possible for the photographic astrometry accuracy. The collection of plates, obtained in other observatories - participants of the project, are partially safe and can be used for the same astrometric tasks.

  4. Plutonium finishing plant dangerous waste training plan

    International Nuclear Information System (INIS)

    ENTROP, G.E.

    1999-01-01

    This training plan describes general requirements, worker categories, and provides course descriptions for operation of the Plutonium Finish Plant (PFP) waste generation facilities, permitted treatment, storage and disposal (TSD) units, and the 90-Day Accumulation Areas

  5. The Adolescent Who Does Not Finish Anything.

    Science.gov (United States)

    Breiner, Sander J.

    1985-01-01

    Practical information for therapists who deal with adolescents who do not finish tasks is presented. The relationship of task incompletion to neurosis, psychosis, depression, homosexuality, and drug abuse is described, and techniques and guidelines for treatment are provided. (Author)

  6. "Sinus oli muidugi teatud elegantsi..." : [luuletused] / Timo Lappalainen ; tõlkinud Jan Kaus

    Index Scriptorium Estoniae

    Lappalainen, Timo

    2004-01-01

    Sisu: "Sinus oli muidugi teatud elegantsi... ; Vihjeid homse päeva kaotajale ; "Reedeõhtuti liikus ringi palju amatööre..." ; "Lõppude lõpuks ei mäleta ma kogu tripist mitte midagi..." ; "Algajad kardavad, et nende laused varastatakse ära..." ; "Surnud laenavad oma valguse raudteejaamadest..." ; "Nüüd, mil mu depressioon on tõeline anekdoot..." ; "Ei midagi erilist, tahtsin sind ainult sööma kutsuda..." ; "Kuhu siis nüüd jälle minek?..." ; "Suurema osa kitsast toast täitsid voodi..." ; "Ma pidin sinust kirjutama..." ; "Kui põgenesin piki Stadsparki kolmnurga üht äärt sellesügisese kurbuse eest..." ; "Panen kella käele: pool seitse, mitte pool neli..." ; "Iga mees saab oma väljateenitud padja..." ; "Taskukell muudab aeglaseks...". Eluloolisi andmeid autori kohta lk. 278

  7. Modeling chlorophyll-a and turbidity concentrations in river Ganga (India) using Landsat-8 OLI imagery

    Science.gov (United States)

    Prasad, Satish; Saluja, Ridhi; Garg, J. K.

    2017-10-01

    Rivers, one of the most complex ecosystems are highly dynamic and vary spatially as well as temporally. Chlorophyll-a (Chl-a) is considered one of the primary indicators of water quality and a measure of river productivity, while turbidity in rivers is a measure of suspended organic matter. Monitoring of river water quality is quite challenging, demand tremendous efforts and resources. Numerous algorithms have been developed in the recent years for estimating environmental parameters such as chlorophyll-a and turbidity from remote sensing imagery. However, most of these algorithms were focused on the lentic ecosystems. There is a paucity of algorithms for rivers from which water quality variables can be estimated using remotely sensed imagery. The primary objective of our study is to develop algorithms based on Landsat 8 OLI imagery and in-situ observations for estimating of Chl-a and turbidity in the Upper Ganga river, India. Band reflectance images from multispectral Landsat-8 OLI pertaining to May and October 2016, and May 2017 were used for model development and validation along with near synchronous ground truth data. Algorithms based on Band 3 (R2= 0.73) proved to be the best applicable algorithm for estimating chlorophyll-a. The best algorithm for estimating turbidity was found to be log (B4/B5) (R2= 0.69) based on band combinations (individual band reflectance, band ratio, logarithmically transformed band reflectance and ratios) tested. The developed algorithms were used to generate maps showing the spatiotemporal variability of chlorophyll-a and turbidity concentration in the Upper Ganga river (Brijghat to Narora) which is also a Ramsar site.

  8. A multicharge ion source (Supernanogan) for the OLIS facility at ISAC/TRIUMF.

    Science.gov (United States)

    Jayamanna, K; Wight, G; Gallop, D; Dube, R; Jovicic, V; Laforge, C; Marchetto, M; Leross, M; Louie, D; Laplante, R; Laxdal, R; McDonald, M; Wiebe, G J; Wang, V; Yan, F

    2010-02-01

    The Off-Line Ion Source (OLIS) [K. Jayamanna, D. Yuan, T. Kuo, M. MacDonald, P. Schmor, and G. Dutto, Rev. Sci. Instrum. 67, 1061 (1996); K. Jayamanna, Rev. Sci. Instrum. 79, 02711 (2008)] facility consists of a high voltage terminal containing a microwave cusp ion source, either a surface ion source or a hybrid surface-arc discharge ion source [K. Jayamanna and C. Vockenhuber, Rev. Sci. Instrum. 79, 02C712 (2008)], and an electrostatic switch that allows the selection of any one of the sources without mechanical intervention. These sources provide a variety of +1 beams up to mass 30 for Isotope Separator and ACcelerator (ISAC) [R. E. Laxdal, Nucl. Instrum. Methods Phys. Res. B 204, 400 (2003)] experiments, commissioning the accelerators, setting up the radioactive experiments, and for tuning the beam lines. The radio frequency quadrupole (RFQ) [M. Marchetto, Z. T. Ang, K. Jayamanna, R. E. Laxdal, A. Mitra, and V. Zvyagintsev, Eur. Phys. J. Spec. Top. 150, 241 (2005)] injector accelerator is a constant velocity machine designed to accept only 2 keV/u and the source extraction energy is limited to 60 kV. Further stripping is then needed downstream of the RFQ to inject the beam into the drift tube linac [M. Marchetto, Z. T. Ang, K. Jayamanna, R. E. Laxdal, A. Mitra, and V. Zvyagintsev, Eur. Phys. J. Spec. Top. 150, 241 (2005)] accelerator that requires A/q up to 6. Base on this constraints a multicharge ion source capable to deliver beams above mass 30 with A/q up to 6 was needed in order to reach full capability of the ISAC facility. A Supernanogan [C. Bieth et al., Nucleonika 48, S93 (2003)] multicharge ion source was then purchased from Pantechnik and was installed in the OLIS terminal. Commissioning and performance of the Supernanogan with some results such as emittance dependence of the charge states as well as charge state efficiencies are presented.

  9. The Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS) on the Landsat Data Continuity Mission (LDCM)

    Science.gov (United States)

    Reuter, Dennis; Irons, James; Lunsford, Allen; Montanero, Matthew; Pellerano, Fernando; Richardson, Cathleen; Smith, Ramsey; Tesfaye, Zelalem; Thome, Kurtis

    2011-01-01

    The Landsat Data Continuity Mission (LDCM), a joint NASA and United States Geological Survey (USGS) mission, is scheduled for launch in December, 2012. The LDCM instrument payload will consist of the Operational Land Imager (OLI), provided by Ball Aerospace and Technology Corporation (BATC) under contract to NASA and the Thermal Infrared Sensor (TIRS), provided by NASA's Goddard Space Flight Center (GSFC). This paper will describe the design, capabilities and status of the OLI and TIRS instruments. The OLI will provide 8 channel multispectral images at a spatial resolution of 30 meters and panchromatic images at 15 meter spatial resolution. The TIRS is a 100 meter spatial resolution push-broom imager whose two spectral channels, centered at 10.8 and 12 microns, split the ETM+ thermal bands. The two channels allow the use of the "split-window" technique to aid in atmospheric correction. The TIRS focal plane consists of three Quantum Well Infrared Photodetector (QWIP) arrays to span the 185 km swath width. The OLI and TIRS instruments will be operated independently but in concert with each other. Data from both instruments will be merged into a single data stream at the (USGS)/Earth Resources Observation and Science (EROS) facility. The ground system, being developed by USGS, includes an Image Assessment System (lAS), similar to Landsat-7's, to operationally monitor, characterize and update the calibrations of the two sensors.

  10. Samenstelling van de vluchtige olie van Origanum vulgare L. ssp. vulgare gedurende de ontwikkeling van de plant

    NARCIS (Netherlands)

    Maarse, Henk

    1971-01-01

    INLEIDING EN DOEL VAN HET ONDERZOEK Vele onderzoekers hebben de laatste jaren de vorming van de verbindingen in vluchtige olien van planten bestudeerd door het bepalen van de verandering in de samenstelling van de vluchtige olie tijdens de groei van de plant. Lemli (68) wees als eerste op de

  11. Gaschromatografisch onderzoek naar de samenstelling van de vluchtige olie van Mentha piperita L. gedurende de ontwikkeling van de plant

    NARCIS (Netherlands)

    Malingré, Theodorus Maria

    1966-01-01

    SAMENVATTING Het doel van het beschreven onderzoek was door middel van gaschromatografie, gecombineerd met andere analysemethoden, de samenstelling van de vluchtige olie van Mentha piperita L. en de veranderingen hierin gedurende de ontwikkeling van de plant, te bepalen en uit de resultaten van het

  12. Detection and mapping the spatial distribution of bracken fern weeds using the Landsat 8 OLI new generation sensor

    Science.gov (United States)

    Matongera, Trylee Nyasha; Mutanga, Onisimo; Dube, Timothy; Sibanda, Mbulisi

    2017-05-01

    Bracken fern is an invasive plant that presents serious environmental, ecological and economic problems around the world. An understanding of the spatial distribution of bracken fern weeds is therefore essential for providing appropriate management strategies at both local and regional scales. The aim of this study was to assess the utility of the freely available medium resolution Landsat 8 OLI sensor in the detection and mapping of bracken fern at the Cathedral Peak, South Africa. To achieve this objective, the results obtained from Landsat 8 OLI were compared with those derived using the costly, high spatial resolution WorldView-2 imagery. Since previous studies have already successfully mapped bracken fern using high spatial resolution WorldView-2 image, the comparison was done to investigate the magnitude of difference in accuracy between the two sensors in relation to their acquisition costs. To evaluate the performance of Landsat 8 OLI in discriminating bracken fern compared to that of Worldview-2, we tested the utility of (i) spectral bands; (ii) derived vegetation indices as well as (iii) the combination of spectral bands and vegetation indices based on discriminant analysis classification algorithm. After resampling the training and testing data and reclassifying several times (n = 100) based on the combined data sets, the overall accuracies for both Landsat 8 and WorldView-2 were tested for significant differences based on Mann-Whitney U test. The results showed that the integration of the spectral bands and derived vegetation indices yielded the best overall classification accuracy (80.08% and 87.80% for Landsat 8 OLI and WorldView-2 respectively). Additionally, the use of derived vegetation indices as a standalone data set produced the weakest overall accuracy results of 62.14% and 82.11% for both the Landsat 8 OLI and WorldView-2 images. There were significant differences {U (100) = 569.5, z = -10.8242, p < 0.01} between the classification accuracies

  13. Glazed Tiles as Floor Finish in Nigeria

    Directory of Open Access Journals (Sweden)

    Toyin Emmanuel AKINDE

    2013-09-01

    Full Text Available Tile is no doubt rich in antiquity; its primordial  show, came as mosaic with primary prospect in sacred floor finish before its oblivion, courtesy of, later consciousness towards wall finish in banquets, kitchens, toilets, restaurants and even bars. Today, its renaissance as floor finish is apparent in private and public architectural structures with prevalence in residential, recreational, commercial, governmental and other spaces. In Nigeria, the use of glazed tiles as floor finish became apparent, supposedly in mid-twentieth century; and has since, witnessed ever increasing demands from all sundry; a development that is nascent and has necessitated its mass  production locally with pockets of firms in the country. The latter however, is a resultant response to taste cum glazed tiles affordability, whose divergent sophistication in design, colour, size and shape is believed preferred to terrazzo, carpet and floor flex tile. Accessible as glazed tile and production is, in recent times; its dearth of a holistic literature in Nigeria is obvious. In the light of the latter, this paper examine glazed tiles as floor finish in Nigeria, its advent, usage, production, challenge, benefit and prospect with the hope of opening further frontier in discipline specifics.

  14. Effect of Burnishing Parameters on Surface Finish

    Science.gov (United States)

    Shirsat, Uddhav; Ahuja, Basant; Dhuttargaon, Mukund

    2017-08-01

    Burnishing is cold working process in which hard balls are pressed against the surface, resulting in improved surface finish. The surface gets compressed and then plasticized. This is a highly finishing process which is becoming more popular. Surface quality of the product improves its aesthetic appearance. The product made up of aluminum material is subjected to burnishing process during which kerosene is used as a lubricant. In this study factors affecting burnishing process such as burnishing force, speed, feed, work piece diameter and ball diameter are considered as input parameters while surface finish is considered as an output parameter In this study, experiments are designed using 25 factorial design in order to analyze the relationship between input and output parameters. The ANOVA technique and F-test are used for further analysis.

  15. Finishing of the cold mass assembly

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    Photo 1 Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions. Photo 2 The cold mass assembly is resting on special supports in order to allow the finishing operations. Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions. Photo 3 View of the lyre-side end of the active part assembly. The extremity of the shrinking cylinder has been bevelled in view of welding the end cover. Photo 4 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. One can also see the light building surrounding the finishing station, which purpose is to isolate the laser measuring machines from disturbances. Photo 5 The extremity of the shri...

  16. Imobilisasi Polutan Fe dan Pb dalam Limbah Oli Bekas dengan Solidifikasi/Stabilisasi

    Directory of Open Access Journals (Sweden)

    Monik Kasman

    2016-12-01

    Full Text Available Lubricant waste is categorized as hazardous waste stated in government regulation (PP 101/ 2014. It could dangers human being and environment. This problem can be addressed by solidification/stabilization process. In this work, lubricant waste was solidified/stabilized in a mixture of lubricant waste with cement as binder and silica sand into mortar sized of (5x5x5 cm. This study was aimed to investigate the influences of ratio of lubricant waste to water (ratio o/a and curing time or age of mortar to the effectiveness of s/s process by testing mortar quality physically and chemically. The test includes compressive strenght test and leaching test (toxicity characteristic leaching procedure. The results showed compressive strenght value for mortar with the ratio o/a 0%:100%, 15%:85%, and 25%:75% in the age of mortar 7 days, 14 days, and 28 days was met the compressive strenght value qualification standardized by SNI-15-7064.2004 and ASTM C-150-02. The test of samples mortar leached using TCLP test method showed that the concentration of Pb and Fe for the ratio o/a 0%:100%, 15%:85%, dan 25%:75% and age of mortar 7 days, 14 days, and 28 days ranges 0,517x10-6 – 0,612x10-6 mg/L, and 0,174x10-6 – 0,780x10-6 mg/L respectively. The concentrations of Pb were less than the concentration of quality standard and pass the TCLP test defined by attachment of government regulation (PP 101/2014.ABSTRAK                        Limbah oli bekas dikategorikan sebagai limbah B3 dalam PP 101 tahun 2014 yang berpotensi membahayakan makhluk hidup dan lingkungan. Solidifikasi/stabilisasi merupakan salah satu cara untuk mengatasi permasalahan limbah B3. Upaya ini dilakukan dengan proses solidifikasi/stabilisasi (s/s limbah oli bekas dengan campuran semen dan pasir silika menjadi bentuk mortar berukuran (5x5x5 cm. Penelitian bertujuan untuk mengidentifikasi pengaruh rasio oli bekas terhadap air (o/a dan umur mortar terhadap efektivitas proses s

  17. Mapping of the Seagrass Cover Along the Mediterranean Coast of Turkey Using Landsat 8 Oli Images

    Science.gov (United States)

    Bakirman, T.; Gumusay, M. U.; Tuney, I.

    2016-06-01

    Benthic habitat is defined as ecological environment where marine animals, plants and other organisms live in. Benthic habitat mapping is defined as plotting the distribution and extent of habitats to create a map with complete coverage of the seabed showing distinct boundaries separating adjacent habitats or the use of spatially continuous environmental data sets to represent and predict biological patterns on the seafloor. Seagrass is an essential endemic marine species that prevents coast erosion and regulates carbon dioxide absorption in both undersea and atmosphere. Fishing, mining, pollution and other human activities cause serious damage to seabed ecosystems and reduce benthic biodiversity. According to the latest studies, only 5-10% of the seafloor is mapped, therefore it is not possible to manage resources effectively, protect ecologically important areas. In this study, it is aimed to map seagrass cover using Landsat 8 OLI images in the northern part of Mediterranean coast of Turkey. After pre-processing (e.g. radiometric, atmospheric, water depth correction) of Landsat images, coverage maps are produced with supervised classification using in-situ data which are underwater photos and videos. Result maps and accuracy assessment are presented and discussed.

  18. MAPPING OF THE SEAGRASS COVER ALONG THE MEDITERRANEAN COAST OF TURKEY USING LANDSAT 8 OLI IMAGES

    Directory of Open Access Journals (Sweden)

    T. Bakirman

    2016-06-01

    Full Text Available Benthic habitat is defined as ecological environment where marine animals, plants and other organisms live in. Benthic habitat mapping is defined as plotting the distribution and extent of habitats to create a map with complete coverage of the seabed showing distinct boundaries separating adjacent habitats or the use of spatially continuous environmental data sets to represent and predict biological patterns on the seafloor. Seagrass is an essential endemic marine species that prevents coast erosion and regulates carbon dioxide absorption in both undersea and atmosphere. Fishing, mining, pollution and other human activities cause serious damage to seabed ecosystems and reduce benthic biodiversity. According to the latest studies, only 5–10% of the seafloor is mapped, therefore it is not possible to manage resources effectively, protect ecologically important areas. In this study, it is aimed to map seagrass cover using Landsat 8 OLI images in the northern part of Mediterranean coast of Turkey. After pre-processing (e.g. radiometric, atmospheric, water depth correction of Landsat images, coverage maps are produced with supervised classification using in-situ data which are underwater photos and videos. Result maps and accuracy assessment are presented and discussed.

  19. Evaluation of relative radiometric correction techniques on Landsat 8 OLI sensor data

    Science.gov (United States)

    Novelli, Antonio; Caradonna, Grazia; Tarantino, Eufemia

    2016-08-01

    The quality of information derived from processed remotely sensed data may depend upon many factors, mostly related to the extent data acquisition is influenced by atmospheric conditions, topographic effects, sun angle and so on. The goal of radiometric corrections is to reduce such effects in order enhance the performance of change detection analysis. There are two approaches to radiometric correction: absolute and relative calibrations. Due to the large amount of free data products available, absolute radiometric calibration techniques may be time consuming and financially expensive because of the necessary inputs for absolute calibration models (often these data are not available and can be difficult to obtain). The relative approach to radiometric correction, known as relative radiometric normalization, is preferred with some research topics because no in situ ancillary data, at the time of satellite overpasses, are required. In this study we evaluated three well known relative radiometric correction techniques using two Landsat 8 - OLI scenes over a subset area of the Apulia Region (southern Italy): the IR-MAD (Iteratively Reweighted Multivariate Alteration Detection), the HM (Histogram Matching) and the DOS (Dark Object Subtraction). IR-MAD results were statistically assessed within a territory with an extremely heterogeneous landscape and all computations performed in a Matlab environment. The panchromatic and thermal bands were excluded from the comparisons.

  20. Wood properties affecting finish service life

    Science.gov (United States)

    R. Sam. Williams; Charles. Jourdain; George I. Daisey; Robert W. Springate

    2000-01-01

    Wood is a biological material that has widely different properties depending on species, geographic area where the tree grew, the growth conditions, size of the tree at harvest, sawing, and other manufacturing processes. Some of the more important wood properties as they relate to wood finishing are discussed, e.g., growth rate, density, knots, extractives, juvenile...

  1. Explosion hazards of aluminum finishing operations

    NARCIS (Netherlands)

    Taveau, J.R.; Hochgreb, Simone; Lemkowitz, S.M.; Roekaerts, D.J.E.M.

    2018-01-01

    Metal dust deflagrations have become increasingly common in recent years. They are also more devastating than deflagrations involving organic materials, owing to metals' higher heat of combustion, rate of pressure rise, explosion pressure and flame temperature. Aluminum finishing operations offer

  2. Textile finishing chemicals: an industrial guide

    National Research Council Canada - National Science Library

    Flick, Ernest W

    1990-01-01

    ..., hand modifiers, antistatic agents, biocides, fixatives, scouring agents, leveling agents, dispersants, defoamers, anticracking agents, binders, lubricating agents, stiffeners, and sequestering agents. The chemicals may constitute a substantial portion of the finished textile. In many cases 10% or more of the fabric's final weight may derive fro...

  3. Plutonium Finishing Plant (PFP) hazards assessment

    International Nuclear Information System (INIS)

    Campbell, L.R.

    1998-01-01

    This report documents the hazards assessment for the Plutonium Finishing Plant (PFP) located on the US Department of Energy (DOE) Hanford Site. This hazards assessment was conducted to provide the emergency planning technical basis for the PFP. DOE Orders require an emergency planning hazards assessment for each facility that has the potential to reach or exceed the lowest level emergency classification

  4. Drywall Finishing Apprenticeship. Course Outline (C-6).

    Science.gov (United States)

    Lengert, Gerald

    This course outline was prepard to help apprentice drywall installers and teachers of drywall finishing courses to learn or teach the skills necessary for the apprenticeship course in British Columbia. The course outline consists of 11 tracks (units) that cover the following topics: estimating, job inspection, safety, applying bead, filling…

  5. Pneumonia outbreaks in calves and finishers.

    Science.gov (United States)

    2016-03-19

    Pneumonia in calves and finishers. Ovarian tumour in a calf . Abortion associated with bovine herpesvirus 1 in a suckler herd. Parasitic gastroenteritis causing illthrift and death in sheep. Outbreaks of acute fasciolosis in sheep. These are among matters discussed in the disease surveillance report for December 2015 from SAC Consulting: Veterinary Services (SAC C VS). British Veterinary Association.

  6. Performance characteristics and nutrient digestibility of Finisher ...

    African Journals Online (AJOL)

    An experiment was conducted to determine the performance characteristics, nutrient digestibility and blood chemistry of Finishing (84-112d) turkeys fed diets containing 100 g/kg MSP supplemented with varying combinations of enzyme and yeast. A total of 100 day-old, British United Turkeys (BUT) turkeys were reared for ...

  7. Influence of the surface finishing on ultrasound velocity in wood

    Directory of Open Access Journals (Sweden)

    Tomáš Špaček

    2008-01-01

    Full Text Available Non-destructive diagnostic methods are very useful for monumental buildings. This paper deals with one of these technique, namely with ultrasound testing and influence of surface finishing on ultrasound velocity measured by means of device the Arborsonic Decay Detector. Surface finishing (Primalex – thick synthetic film of the surface finishing, Luxol – Extra – thin synthetic film of the surface finishing and Impranal Profi SL – thick acryl film the surface finishing were selected and tested in this research. The transmittion time was measured and velocity was converted from it. This was compared before and after application of surface finishing.

  8. Corrosion protection and finishing of automobiles

    International Nuclear Information System (INIS)

    Sheikh, S.T.

    2005-01-01

    finishing of automobiles is an important aspect. There have been considerable reductions of weight in automobiles by the use of composites components replacing heavy metallic components. Fenders previously based on metal have been replaced with plastic and painted with the same colour shade as of the metallic body, this has eps for proper adhesion of the paints on the plastic fender to avoid chipping off the paint form it. This paper discusses the necessary processes required for finishing of an automobile along with the corrosion protection measures. Automobiles contains a variety of engineering materials, engine main body fuel tanks connecting rods heat radiators and other mechanical parts are made from different types of engineering alloys having varying chemical compositions. Other parts like dashboard, front panel and other are made from composites. The main body made from cold roll ed steel having various contours 'c' it due to the different designs is the potential site for corrosion attack, The main body is exposed to the hostile environment through out its life period. An automobile is given a particular finish with a view to counter the hostile environments as they are not limited for plying in a limiting conditions and are taken to different weather conditions in one day thus facing severe stresses and strain. Thus it is essential that an automobile before rolling 'out of the assembly line should properly corrosion resistant and aesthetically pleasant also. Finishing for automobiles being very specialized, the main requirement being maximum durability with minimum numbers of coats baked, at the fastest possible schedule. High gloss and range of good eye catching colours being important to increase sales appeal. In the near past the car finishes were based on alkyd-amino resins baking materials and force drying lacquers, which have excellent appearance originally and maintain it on aging. The finishing system for the synthetic baking type may consist of

  9. Reutilització de l'oli de fregir a domicilis particulars: productes secundaris i riscos associats

    OpenAIRE

    Abenza Castejón, Cleia

    2017-01-01

    La reutilització de l'oli per a fregir aliments és un procés comú tant en la indústria de restauració com a cuines particulars, però el seu ús inadequat, pot comportar riscos en la seguretat alimentària. Durant el procés d'escalfament d'un oli, la seva composició varia, es generen compostos polars que passen a l'aliment i per tant, s'acaben ingerint. La finalitat d'aquest treball ha sigut obtenir una visió general de les pràctiques alimentàries que segueixen els usuaris de domicilis particula...

  10. Evaluating the capability of Landsat 8 OLI and SPOT 6 for discriminating invasive alien species in the African Savanna landscape

    Science.gov (United States)

    Kganyago, Mahlatse; Odindi, John; Adjorlolo, Clement; Mhangara, Paidamoyo

    2018-05-01

    Globally, there is paucity of accurate information on the spatial distribution and patch sizes of Invasive Alien Plants (IAPs) species. Such information is needed to aid optimisation of control mechanisms to prevent further spread of IAPs and minimize their impacts. Recent studies have shown the capability of very high spatial (<1 m) and spectral resolution (<10 nm) data for discriminating vegetation species. However, very high spatial resolution may introduce significant intra-species spectral variability and result in reduced mapping accuracy, while higher spectral resolution data are commonly limited to smaller areas, are costly and computationally expensive. Alternatively, medium and high spatial resolution data are available at low or no cost and have limitedly been evaluated for their potential in determining invasion patterns relevant for invasion ecology and aiding effective IAPs management. In this study medium and high resolution datasets from Landsat Operational Land Imager (OLI) and SPOT 6 sensors respectively, were evaluated for mapping the distribution and patch sizes of IAP, Parthenium hysterophorus in the savannah landscapes of KwaZulu-Natal, South Africa. Support Vector Machines (SVM) classifier was used for classification of both datasets. Results indicated that SPOT 6 had a higher overall accuracy (86%) than OLI (83%) in mapping P. hysterophorus. The study found larger distributions and patch sizes in OLI than in SPOT 6 as a result of possible P. hysterophorus expansion due to temporal differences between images and coarser pixels were insufficient to delineate gaps inside larger patches. On the other hand, SPOT 6 showed better capabilities of delineating gaps and boundaries of patches, hence had better estimates of distribution and patch sizes. Overall, the study showed that OLI may be suitable for mapping well-established patches for the purpose of large scale monitoring, while SPOT 6 can be used for mapping small patches and prioritising them

  11. Economics of finishing Tanzania Shorthorn Zebu cattle in feedlot and optimum finishing period

    DEFF Research Database (Denmark)

    Asimwe, L.; Kimambo, A E; Laswai, G. H.

    2016-01-01

    in feedlot. Non-feed costs per kg extra meat were higher for short stays (4,500 TSh.) than long stays (2,630 TSh.) If meat prices were independent on finishing period length, high MEI was profitable with increment of (81%) profit per kg extra meat for an increase from 50 to 75 days in feedlot. Assuming a 10......% increase in meat price due to feedlot finishing regardless of finishing length, profit per animal carcass increased with increasing days in feedlot for high MEI from 71,800 TSh. in 25 days to 143,000 TSh. in 100 days in feedlot. Assuming meat price increased by 5% with each increase in feedlot finishing...... length of 25 days, higher profit per animal carcass was realized with long stays (100 days, 238,000 TSh.) than short stays (25 days, 37,600 TSh.). It was concluded that the high feeding level is the most profitable irrespective of meat price and finishing length. The optimum finishing length is between...

  12. Clear exterior finishes : finding the balance between aesthetics and durability

    Science.gov (United States)

    Tom Daniel; Marc S. Hirsch; Ken McClelland; Alan S. Ross; R. Sam Williams

    2004-01-01

    Consumers can easily be confused by the abundance of choices to make when selecting a clear wood finish. There are many types of clear finishes with different characteristics and product claims. This article is designed to help consumers sort out the different finishes and effectively choose which product would be best for their purpose. First, we cover the causes and...

  13. Sequence finishing and mapping of Drosophila melanogasterheterochromatin

    Energy Technology Data Exchange (ETDEWEB)

    Hoskins, Roger A.; Carlson, Joseph W.; Kennedy, Cameron; Acevedo,David; Evans-Holm, Martha; Frise, Erwin; Wan, Kenneth H.; Park, Soo; Mendez-Lago, Maria; Rossi, Fabrizio; Villasante, Alfredo; Dimitri,Patrizio; Karpen, Gary H.; Celniker, Susan E.

    2007-06-15

    Genome sequences for most metazoans are incomplete due tothe presence of repeated DNA in the pericentromeric heterochromatin. Theheterochromatic regions of D. melanogaster contain 20 Mb of sequenceamenable to mapping, sequence assembly and finishing. Here we describethe generation of 15 Mb of finished or improved heterochromatic sequenceusing available clone resources and assembly and mapping methods. We alsoconstructed a BAC-based physical map that spans approximately 13 Mb ofthe pericentromeric heterochromatin, and a cytogenetic map that positionsapproximately 11 Mb of BAC contigs and sequence scaffolds in specificchromosomal locations. The integrated sequence assembly and maps greatlyimprove our understanding of the structure and composition of this poorlyunderstood fraction of a metazoan genome and provide a framework forfunctional analyses.

  14. A mathematical model for predicting glucose levels in critically-ill patients: the PIGnOLI model

    Directory of Open Access Journals (Sweden)

    Zhongheng Zhang

    2015-06-01

    Full Text Available Background and Objectives. Glycemic control is of paramount importance in the intensive care unit. Presently, several BG control algorithms have been developed for clinical trials, but they are mostly based on experts’ opinion and consensus. There are no validated models predicting how glucose levels will change after initiating of insulin infusion in critically ill patients. The study aimed to develop an equation for initial insulin dose setting.Methods. A large critical care database was employed for the study. Linear regression model fitting was employed. Retested blood glucose was used as the independent variable. Insulin rate was forced into the model. Multivariable fractional polynomials and interaction terms were used to explore the complex relationships among covariates. The overall fit of the model was examined by using residuals and adjusted R-squared values. Regression diagnostics were used to explore the influence of outliers on the model.Main Results. A total of 6,487 ICU admissions requiring insulin pump therapy were identified. The dataset was randomly split into two subsets at 7 to 3 ratio. The initial model comprised fractional polynomials and interactions terms. However, this model was not stable by excluding several outliers. I fitted a simple linear model without interaction. The selected prediction model (Predicting Glucose Levels in ICU, PIGnOLI included variables of initial blood glucose, insulin rate, PO volume, total parental nutrition, body mass index (BMI, lactate, congestive heart failure, renal failure, liver disease, time interval of BS recheck, dextrose rate. Insulin rate was significantly associated with blood glucose reduction (coefficient: −0.52, 95% CI [−1.03, −0.01]. The parsimonious model was well validated with the validation subset, with an adjusted R-squared value of 0.8259.Conclusion. The study developed the PIGnOLI model for the initial insulin dose setting. Furthermore, experimental study is

  15. A cloud shadow detection method combined with cloud height iteration and spectral analysis for Landsat 8 OLI data

    Science.gov (United States)

    Sun, Lin; Liu, Xinyan; Yang, Yikun; Chen, TingTing; Wang, Quan; Zhou, Xueying

    2018-04-01

    Although enhanced over prior Landsat instruments, Landsat 8 OLI can obtain very high cloud detection precisions, but for the detection of cloud shadows, it still faces great challenges. Geometry-based cloud shadow detection methods are considered the most effective and are being improved constantly. The Function of Mask (Fmask) cloud shadow detection method is one of the most representative geometry-based methods that has been used for cloud shadow detection with Landsat 8 OLI. However, the Fmask method estimates cloud height employing fixed temperature rates, which are highly uncertain, and errors of large area cloud shadow detection can be caused by errors in estimations of cloud height. This article improves the geometry-based cloud shadow detection method for Landsat OLI from the following two aspects. (1) Cloud height no longer depends on the brightness temperature of the thermal infrared band but uses a possible dynamic range from 200 m to 12,000 m. In this case, cloud shadow is not a specific location but a possible range. Further analysis was carried out in the possible range based on the spectrum to determine cloud shadow location. This effectively avoids the cloud shadow leakage caused by the error in the height determination of a cloud. (2) Object-based and pixel spectral analyses are combined to detect cloud shadows, which can realize cloud shadow detection from two aspects of target scale and pixel scale. Based on the analysis of the spectral differences between the cloud shadow and typical ground objects, the best cloud shadow detection bands of Landsat 8 OLI were determined. The combined use of spectrum and shape can effectively improve the detection precision of cloud shadows produced by thin clouds. Several cloud shadow detection experiments were carried out, and the results were verified by the results of artificial recognition. The results of these experiments indicated that this method can identify cloud shadows in different regions with correct

  16. OLI/ESP Modeling Of The Semi-Integrated Pilot Plant For Estimate Of Campaigns I-IV Simulant Volumes

    International Nuclear Information System (INIS)

    CARL, BARNES

    2004-01-01

    Four SIPP campaigns have been planned to investigate the effect of recycle streams on the RPP-WTP pretreatment process such as the filter flux rate and other areas of interest. This document describes OLI/ESP modeling work done in support of the planning and operation of the SIPP. An existing OLI/ESP steady-state model was expanded to represent the pretreatment system through to the TLP evaporator for the LAW train and the washed sludge for the HLW train. The model was used to investigate alternative operating scenarios, determine the optimum volumetric waste feed ratio of AP-101 to AY-102, and, for each campaign, estimate the simulant and input recycle volumes corresponding to the target glass production rates of 6MT/day HLW glass and 80MT/day LAW glass and scaled to the target of 140L of Campaign I washed sludge. It was designed to quickly achieve steady state and simulation results indicate this was accomplished by Campaign IV. The alternative operating scenarios modeled differed only in the point at which the AP-101 and AY-102 waste feed streams were introduced to the process. The results showed no difference in the production rate between the scenarios. Therefore, for these specific waste feeds the process should be operated to maximize the energy efficiency and minimize scaling in the evaporator by feeding the AY-102 waste feed to the ultra-filtration feed prep tank, bypassing the waste feed evaporator

  17. Radiometric Non-Uniformity Characterization and Correction of Landsat 8 OLI Using Earth Imagery-Based Techniques

    Directory of Open Access Journals (Sweden)

    Frank Pesta

    2014-12-01

    Full Text Available Landsat 8 is the first satellite in the Landsat mission to acquire spectral imagery of the Earth using pushbroom sensor instruments. As a result, there are almost 70,000 unique detectors on the Operational Land Imager (OLI alone to monitor. Due to minute variations in manufacturing and temporal degradation, every detector will exhibit a different behavior when exposed to uniform radiance, causing a noticeable striping artifact in collected imagery. Solar collects using the OLI’s on-board solar diffuser panels are the primary method of characterizing detector level non-uniformity. This paper reports on an approach for using a side-slither maneuver to estimate relative detector gains within each individual focal plane module (FPM in the OLI. A method to characterize cirrus band detector-level non-uniformity using deep convective clouds (DCCs is also presented. These approaches are discussed, and then, correction results are compared with the diffuser-based method. Detector relative gain stability is assessed using the side-slither technique. Side-slither relative gains were found to correct streaking in test imagery with quality comparable to diffuser-based gains (within 0.005% for VNIR/PAN; 0.01% for SWIR and identified a 0.5% temporal drift over a year. The DCC technique provided relative gains that visually decreased striping over the operational calibration in many images.

  18. Study on Retrieval of Chlorophyll-a Concentration Based on Landsat OLI Imagery in the Haihe River, China

    Directory of Open Access Journals (Sweden)

    Qiaozhen Guo

    2016-08-01

    Full Text Available The optical complexity of urban waters makes the remote retrieval of chlorophyll-a (Chl-a concentration a challenging task. In this study, Chl-a concentration was retrieved using reflectance data of Landsat OLI images. Chl-a concentration in the Haihe River of China was obtained using mathematical regression analysis (MRA and an artificial neural network (ANN. A regression model was built based on an analysis of the spectral reflectance and water quality sampling data. Remote sensing inversion results of Chl-a concentration were obtained and analyzed based on a verification of the algorithm and application of the models to the images. The analysis results revealed that the two models satisfactorily reproduced the temporal variation based on the input variables. In particular, the ANN model showed better performance than the MRA model, which was reflected in its higher accuracy in the validation. This study demonstrated that Landsat Operational Land Imager (OLI images are suitable for remote sensing monitoring of water quality and that they can produce high-accuracy inversion results.

  19. Optical absorption and thermoluminescence in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature

    International Nuclear Information System (INIS)

    Delgado, L.

    1984-01-01

    Optical absorption and thermoluminescence (TL) studies in Mg O, Mg O:Ni and Mg O:Li irradiated at room temperature are presented. In pure Mg O the thermal annihilation of Fe3+ by recombination with thermally released electrons at ∼ 90 and 175 degree centigree and the V center annealing by hole release up to 100 degree centigree cause the observed glow peaks at these temperatures. The TL excitation spectrum shows two maxima at 245 nm (electron center) and 288 nm (Fe3+). In Mg O:Ni X irradiation induces Fe 2 + →- Fe 3 + and Ni 2 + → Ni 3 + oxidations. Two TL emission bands centered at 110 degree centigree (red) and 80 o C (green) are assigned to electron release and their recombination at Fe 3 + and Ni 3 + respectively. In Mg O:Li two TL emission bands, one blue (430 nm) and the other red (730 nm) with excitation maxima at 245 nm (electron center) and 200 nm (hole center) respectively are observed. No V-center formation was detected in both Ni and Li doped samples. (Author) 42 refs

  20. Stability analysis and support study on surroundings of finishing cut

    Energy Technology Data Exchange (ETDEWEB)

    Xu, J.; Miao, X.; Lu, A.; Xing, C. [CUMT, Jiangsu (China). College of Mineral and Energy Resources

    2003-09-01

    By means of finishing cut the trackless rubber-tried vehicle can directly go to the working face to remove the equipment. It can promote the efficiency in removing the equipment. Because of the finishing cut continuously affected by the dynamic pressure of face, it is important to find the reasonable position of the finishing cut and the proportion support. Based on the study of the ground pressure and the moving law of overlying strata during the terminal mining in sublevel caving face, the optimal position and the proportion support way of finishing cut were obtained using experiment with analog simulation and numerical simulation. This method can keep the stability for the surroundings of the finishing cut and lay the foundation for finishing the face quickly and safely. The engineering practice shows this technique is efficient and the significant social and economy benefit is obtained. 7 refs.,11 figs.

  1. [Experimental analysis of finishing lines in ceramometal restorations].

    Science.gov (United States)

    Gascón, F; Gil, J A; Fons, A; Badal, R

    1990-11-01

    The preparation is the first step of any tooth reconstruction. The biological integration of the protesis is depending on the marginal adaptation (finish line of the preparation), occlusal adaptation (occlusal reduction), longevity of the restoration (retention and luting) and esthetics. The effect the two finish line of the preparation is studied using experimental design. In porcelain-fused-to-metal the finish line of the preparation in chanfer is superior at the beveled shoulder, because proportioning better marginal adaptation.

  2. Functional finishes of stretch cotton fabrics.

    Science.gov (United States)

    Ibrahim, N A; Amr, A; Eid, B M; Almetwally, A A; Mourad, M M

    2013-11-06

    Functionalized cotton cellulose/spandex woven fabrics with different structures namely plain (1/1), twill (2/2) and satin were produced. Factors affecting the imparted functional properties such as weave structure and constituents of the finishing formulations including ether or ester cross-linker and catalyst type, silicone-micro-emulsion, water/oil repellent, Ag-NP(,)s and TiO2-NP(,)s were studied. The treated fabrics were found to have easy care property together with one or more of the imparted functional properties such as soft-handle, water/oil repellence, antibacterial, UV-protection and self cleaning. The effectiveness of the imparted properties is not seriously affected even after 10 washing cycles. Surface modifications as well as the composition of certain samples were confirmed by SEM images and EDX spectra. Mode of interactions was also suggested. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Figure and finish of grazing incidence mirrors

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Church, E.L.

    1989-08-01

    Great improvement has been made in the past several years in the quality of optical components used in synchrotron radiation (SR) beamlines. Most of this progress has been the result of vastly improved metrology techniques and instrumentation permitting rapid and accurate measurement of the surface finish and figure on grazing incidence optics. A significant theoretical effort has linked the actual performance of components used as x-ray wavelengths to their topological properties as measured by surface profiling instruments. Next-generation advanced light sources will require optical components and systems to have sub-arc second surface figure tolerances. This paper will explore the consequences of these requirements in terms of manufacturing tolerances to see if the present manufacturing state-of-the-art is capable of producing the required surfaces. 15 refs., 14 figs., 2 tabs

  4. Finishing of the cold mass assembly

    CERN Multimedia

    Maximilien Brice

    2001-01-01

    Photo 1 Zoom of the lyre-side end of the active part assembly. The extremity of the shrinking cylinder has been bevelled in view of welding the end cover. Photo 2 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. Photo 3 Zoom of the lyre-side end of the active part assembly. One can also see the auxiliary bus bars needed to power the corrector magnets that are installed in the dipole cold mass assembly. Photo 4 Technicians are putting in order the instrumentation wires. The prototype magnets were equipped with numerous sensors to monitor key parameters during the performance tests at cold conditions.

  5. Finishing of the cold mass assembly

    CERN Multimedia

    Maximilien Brice

    2001-01-01

    Photo 1 The connection-side end of the active part assembly. This view shows the electrical connections between the poles and the curved bus ended with flanges for the connection with the protection diode. Photo 2 The connection-side end of the active part assembly. This view shows the electrical connections between the poles, the auxiliary bus bars and the instrumentation wires. Photo 3 Lyre-side end of the active part assembly. One can see the mechanical support of the corretor magnets that are to be installed around the cold bore tubes. Photo 4 General view of the finishing station showing the special supporting structures (blue and yellow structures) needed for the geometric measurements and for the alignment operations. Around the magnet, there are datum points (on the tripodes) needed to build up the coordinates system for the measurements.

  6. Performance and internal organ characteristics of finisher broilers ...

    African Journals Online (AJOL)

    A 28-day feeding trial was carried out to evaluate the effect of replacing maize as a major source of energy with wild yam (Anchomanes difformis) meal (WYM) in the diets of finisher broiler. One hundred and eighty (180) finisher broilers were fed on five experimental diets formulated such that the maize in diet 1 (control) was ...

  7. Plutonium finishing plant safety systems and equipment list

    International Nuclear Information System (INIS)

    Bergquist, G.G.

    1995-01-01

    The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex

  8. Assessment of the Nutrient Contents of Finished Broiler Starter and ...

    African Journals Online (AJOL)

    The study was conducted to assess and compare the proximate composition and amino acid profile of six (6) finished broiler starter and finisher diets with recommendations of National Research Council (NRC) nutrient requirements table for the different physiological age growth stage. Four samples of each feed type were ...

  9. Performance and cost implication of finisher turkeys fed varying ...

    African Journals Online (AJOL)

    A 28-day experiment was conducted to determine the effect of feeding varying levels of rice milling waste as a substitute on maize on the performance, nutrient utilization and the economics implication on finisher turkeys. Five turkey finisher diets were formulated by substituting maize with rice milling waste at 0%, 25%, 50%, ...

  10. Physiological evaluation of broiler finishers fed fermented bovine ...

    African Journals Online (AJOL)

    Physiological evaluation of broiler finishers fed fermented bovine blood and rumen digesta meal. ... Nigerian Journal of Animal Production ... This study suggested that FBBRD meal when properly processed and at 10 % dietary level of inclusion, can be used in broiler finisher production without adverse effects on the ...

  11. Population dynamics of swine influenza virus in finishing pigs

    NARCIS (Netherlands)

    Loeffen, W.L.A.

    2008-01-01

    Influenza virus infections in swine were first noticed in the US in 1918, during the human pandemic of the Spanish flu. In Europe, seroprevalences for the three most common swine influenza strains at the moment, H1N1, H3N2 and H1N2, range from 20-80% in finishing pigs at the end of the finishing

  12. Experimental investigation on shore hardness of barrel-finished ...

    Indian Academy of Sciences (India)

    Barrel finishing (BF) process is widely used to improve the surface finish and dimensional features of metallic and non-metallic parts using different types of media. As a matter of fact the change in shore hardness (SH) features of fused deposition modelling (FDM)-based master pattern is one of the important considerations ...

  13. Plutonium finishing plant safety systems and equipment list

    Energy Technology Data Exchange (ETDEWEB)

    Bergquist, G.G.

    1995-01-06

    The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex.

  14. Effect of Hoodia gordonii leaf meal supplementation at finisher stage ...

    African Journals Online (AJOL)

    A nutritional experiment was conducted to determine the effect of Hoodia gordonii leaf meal supplementation at finisher stage (30 to 42 days old) on productivity, carcass characteristics and meat sensory attributes of Ross 308 broiler chickens. The chickens were fed a finisher diet supplemented with 0 (H0), 200 (H200), 300 ...

  15. Determining the Impacts of Land Cover/use Categories on Land Surface Temperature Using LANDSAT8-OLI

    Science.gov (United States)

    Bektas Balcik, F.; Ergene, E. M.

    2016-06-01

    Due to unplanned and uncontrolled expansion of urban areas, rural land cover types have been replaced with artificial materials. As a result of these replacements, a wide range of negative environmental impacts seriously impacting human health, natural areas, ecosystems, climate, energy efficiency, and quality of living in town center. In this study, the impact of land surface temperature with respect to land cover and land use categories is investigated and evaluated for Istanbul, Turkey. Land surface temperature data was extracted from 21 October 2014 dated Landsat 8 OLI data using mono-window algorithm. In order to extract land use/cover information from remotely sensed data wetness, greenness and brightness components were derived using Tasseled Cap Transformation. The statistical relationship between land surface temperature and Tasseled Cap Transformation components in Istanbul was analyzed using the regression methods. Correlation between Land Surface Temperature and Meteorological Stations Temperature calculated %74.49.

  16. DETERMINING THE IMPACTS OF LAND COVER/USE CATEGORIES ON LAND SURFACE TEMPERATURE USING LANDSAT8-OLI

    Directory of Open Access Journals (Sweden)

    F. Bektas Balcik

    2016-06-01

    Full Text Available Due to unplanned and uncontrolled expansion of urban areas, rural land cover types have been replaced with artificial materials. As a result of these replacements, a wide range of negative environmental impacts seriously impacting human health, natural areas, ecosystems, climate, energy efficiency, and quality of living in town center. In this study, the impact of land surface temperature with respect to land cover and land use categories is investigated and evaluated for Istanbul, Turkey. Land surface temperature data was extracted from 21 October 2014 dated Landsat 8 OLI data using mono-window algorithm. In order to extract land use/cover information from remotely sensed data wetness, greenness and brightness components were derived using Tasseled Cap Transformation. The statistical relationship between land surface temperature and Tasseled Cap Transformation components in Istanbul was analyzed using the regression methods. Correlation between Land Surface Temperature and Meteorological Stations Temperature calculated %74.49.

  17. Continuity of Reflectance Data between Landsat-7 ETM+ and Landsat-8 OLI, for Both Top-of-Atmosphere and Surface Reflectance: A Study in the Australian Landscape

    Directory of Open Access Journals (Sweden)

    Neil Flood

    2014-08-01

    Full Text Available The new Landsat-8 Operational Land Imager (OLI is intended to be broadly compatible with the previous Landsat-7 Enhanced Thematic Mapper Plus (ETM+. The spectral response of the OLI is slightly different to the ETM+, and so there may be slight differences in the reflectance measurements. Since the differences are a function not just of spectral responses, but also of the target pixels, there is a need to assess these differences in practice, using imagery from the area of interest. This paper presents a large scale study of the differences between ETM+ and OLI in the Australian landscape. The analysis is carried out in terms of both top-of-atmosphere and surface reflectance, and also in terms of biophysical parameters modelled from those respective reflectance spectra. The results show small differences between the sensors, which can be magnified by modelling to a biophysical parameter. It is also shown that a part of this difference appears to be systematic, and can be reliably removed by regression equations to predict ETM+ reflectance from OLI reflectance, before applying biophysical models. This is important when models have been fitted to historical field data coincident with ETM+ imagery. However, there will remain a small per-pixel difference which could be an unwanted source of variability.

  18. Koriander en venkel : I. Ontwikkeling van een gaschromatografische methode voor de bepaling van petroselinezuur : II. Inventariserend onderzoek naar olie- en petroselinezuurgehalte

    NARCIS (Netherlands)

    Kamp, van der H.J.; Coors, R.G.; Oostrom, van J.J.; Jong, de J.

    1990-01-01

    In het kader van het DLO-programma "Plantaardige technische oliën als niemo1e landbouwgrondstoffen voor de industrie" is een gaschromatografische methode ontwikkeld voor de bepaling van petroselinezuur in koriander- en venkelzaad. Met een capillaire CP Sil 88 kolom is het mogelijk om de in koriander

  19. D'Monte : rünnaku ajend oli koostöö Ameerikaga / Darryl D'Monte ; interv, Ülle Toode

    Index Scriptorium Estoniae

    D'Monte, Darryl

    2008-01-01

    India ajakirjanik vastab küsimustele, mis oli Mumbai terrorirünnaku poliitiline taust, kes olukorrast kasu lõikab, miks peaminister Manmohan Singh teatas esmalt, et rünnak tuli väljastpoolt ja mida peaks India valitsus probleemi lahendamiseks ette võtma

  20. Comparison of Landsat 8 OLI and Landsat 7 ETM+ for estimating grassland LAI using model inversion and spectral indices: case study of Mpumalanga, South Africa

    CSIR Research Space (South Africa)

    Masemola, Cecilia

    2016-06-01

    Full Text Available -to-noise ratio of the Landsat 8 Operational Land Imager (OLI) sensor for the estimation of LAI. The Landsat 8 LAI estimates were compared to that of its predecessors, namely Landsat 7 Enhanced Thematic Mapper Plus (ETM+) (8 bits). Furthermore, we compared...

  1. Plutonium Finishing Plant safety evaluation report

    International Nuclear Information System (INIS)

    1995-01-01

    The Plutonium Finishing Plant (PFP) previously known as the Plutonium Process and Storage Facility, or Z-Plant, was built and put into operation in 1949. Since 1949 PFP has been used for various processing missions, including plutonium purification, oxide production, metal production, parts fabrication, plutonium recovery, and the recovery of americium (Am-241). The PFP has also been used for receipt and large scale storage of plutonium scrap and product materials. The PFP Final Safety Analysis Report (FSAR) was prepared by WHC to document the hazards associated with the facility, present safety analyses of potential accident scenarios, and demonstrate the adequacy of safety class structures, systems, and components (SSCs) and operational safety requirements (OSRs) necessary to eliminate, control, or mitigate the identified hazards. Documented in this Safety Evaluation Report (SER) is DOE's independent review and evaluation of the PFP FSAR and the basis for approval of the PFP FSAR. The evaluation is presented in a format that parallels the format of the PFP FSAR. As an aid to the reactor, a list of acronyms has been included at the beginning of this report. The DOE review concluded that the risks associated with conducting plutonium handling, processing, and storage operations within PFP facilities, as described in the PFP FSAR, are acceptable, since the accident safety analyses associated with these activities meet the WHC risk acceptance guidelines and DOE safety goals in SEN-35-91

  2. Plutonium Finishing Plant safety evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    The Plutonium Finishing Plant (PFP) previously known as the Plutonium Process and Storage Facility, or Z-Plant, was built and put into operation in 1949. Since 1949 PFP has been used for various processing missions, including plutonium purification, oxide production, metal production, parts fabrication, plutonium recovery, and the recovery of americium (Am-241). The PFP has also been used for receipt and large scale storage of plutonium scrap and product materials. The PFP Final Safety Analysis Report (FSAR) was prepared by WHC to document the hazards associated with the facility, present safety analyses of potential accident scenarios, and demonstrate the adequacy of safety class structures, systems, and components (SSCs) and operational safety requirements (OSRs) necessary to eliminate, control, or mitigate the identified hazards. Documented in this Safety Evaluation Report (SER) is DOE`s independent review and evaluation of the PFP FSAR and the basis for approval of the PFP FSAR. The evaluation is presented in a format that parallels the format of the PFP FSAR. As an aid to the reactor, a list of acronyms has been included at the beginning of this report. The DOE review concluded that the risks associated with conducting plutonium handling, processing, and storage operations within PFP facilities, as described in the PFP FSAR, are acceptable, since the accident safety analyses associated with these activities meet the WHC risk acceptance guidelines and DOE safety goals in SEN-35-91.

  3. Effect of silicone finishes on the burning behavior of polyester

    Science.gov (United States)

    Boyon, Julien Xavier Eric

    Polyester fibers are widely used as filling in home applications such as pillows or comforters. Silicone finishes can be used to reduce friction between fibers during processing or as softeners to impart a pleasant down like hand on the fibers. However, it has been reported that these added silicone-based finishes may have a negative effect on the burning behavior of polyester. This research examined the possible mechanisms that can modify the response of polyester fibers when subjected to a flame source. In this study, a spunbond needled polyester nonwoven substrate was treated with different commercial silicone-based finishes. A vertical flame test was used to compare the effect of silicone finishes on the burning behavior of polyester to the inherent burning behavior of untreated polyester. Thermogravimetric analyses (TGA) were performed on spunbond polyester fabric samples to investigate the influence of silicone finishes on the thermal degradation of polyester in air. Residues from TGA were examined using Scanning Electron Microscopy coupled with elemental analysis. Vertical flammability testing showed that even at a low level, the application of silicone-based finishes on a polyester substrate resulted in a dramatic increase of the flame propagation by preventing its inherent response to heat. Thermograms suggested that the silicone finishes had little or no effect on the thermal degradation of polyester substrates.

  4. An overview of plastic optical fiber end finishers at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Mishina, M.; Lindenmeyer, C.; Korienek, J.

    1993-11-01

    Several years ago the need for equipment to precisely finish the ends of plastic optical fibers was recognized. Many high energy physics experiments use thousands of these fibers which must be polished on one or both ends. A fast, easy-to-operate machine yielding repeatable finishes was needed. Three types of machines were designed and constructed that are in daily use at Fermilab, all finish the fiber ends by flycutting with a diamond tool. Althrough diamond flycutting of plastic is not new, the size and fragility of plastic optical fibers present several challenges.

  5. Relevance of microbial finished product testing in food safety management

    DEFF Research Database (Denmark)

    Zwietering, Marcel H.; Jacxsens, Liesbeth; Membré, Jeanne Marie

    2016-01-01

    Management of microbiological food safety is largely based on good design of processes, products and procedures. Finished product testing may be considered as a control measure at the end of the production process. However, testing gives only very limited information on the safety status of a food......-active way by implementing an effective food safety management system. For verification activities in a food safety management system, finished product testing may however be useful. For three cases studies; canned food, chocolate and cooked ham, the relevance of testing both of finished products...... and the production environment is discussed. Since the level of control of different processes can be largely different it is beneficial if the frequency of sampling of finished products and production environments would be related to the associated human health risk, which can be assessed on the basis of risk...

  6. Implementing Cleaner Printed Wiring Board Technologies: Surface Finishes

    Science.gov (United States)

    This document describes the problems, solutions, and time and effort involved in implementing alternative surface finish technologies, and this guide is produced as part of the DfE Printed Wiring Board Project

  7. Environmentally friendly antibacterial cotton textiles finished with siloxane sulfopropylbetaine.

    Science.gov (United States)

    Chen, Shiguo; Chen, Shaojun; Jiang, Song; Xiong, Meiling; Luo, Junxuan; Tang, Jiaoning; Ge, Zaochuan

    2011-04-01

    This paper reports a novel environmentally friendly antibacterial cotton textile finished with reactive siloxane sulfopropylbetaine(SSPB). The results show that SSPB can be covalently bound onto the cotton textile surface, imparting perdurable antibacterial activity. The textiles finished with SSPB have been investigated systematically from the mechanical properties, thermal stability, hydrophilic properties and antibacterial properties. It is found that the hydrophilicity and breaking strength are improved greatly after the cotton textiles are finished with SSPB. Additionally, the cotton textiles finished with SSPB exhibit good antibacterial activities against gram-positive bacteria Staphylococcus aureus (S.aureus, ATCC 6538), gram-negative bacteria Escherichia coli (E.coli, 8099) and fungi Candida albicans (C.albicans, ATCC 10231). Moreover, SSPB is nonleachable from the textiles, and it does not induce skin stimulation and is nontoxic to animals. Thus, SSPB is ideal candidate for environmentally friendly antibacterial textile applications. © 2011 American Chemical Society

  8. Role of alginate in antibacterial finishing of textiles.

    Science.gov (United States)

    Li, Jiwei; He, Jinmei; Huang, Yudong

    2017-01-01

    Antibacterial finishing of textiles has been introduced as a necessary process for various purposes especially creating a fabric with antimicrobial activities. Currently, the textile industry continues to look for textiles antimicrobial finishing process based on sustainable biopolymers from the viewpoints of environmental friendliness, industrialization, and economic concerns. This paper reviews the role of alginate, a sustainable biopolymer, in the development of antimicrobial textiles, including both basic physicochemical properties of alginate such as preparation, chemical structure, molecular weight, solubility, viscosity, and sol-gel transformation property. Then different processing routes (e.g. nanocomposite coating, ionic cross-linking coating, and Layer-by-Layer coating) for the antibacterial finishing of textiles by using alginate are revised in some detail. The achievements in this area have increased our knowledge of alginate application in the field of textile industry and promoted the development of green textile finishing. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. CHARACTERISTICS OF KLEBSIELLA FROM TEXTILE FINISHING PLANT EFFLUENTS

    Science.gov (United States)

    Klebsiella strains are found in abnormally high numbers in a stream receiving wastewater from a textile finishing plant. Representative strains are randomly selected to determine biochemical, serotype, and virulence patterns. All strains conform to the commonly accepted biochemic...

  10. Polishing Metal Mirrors to 0,025 Micron Surface Finish

    DEFF Research Database (Denmark)

    Pedersen, P. E.

    1978-01-01

    A research program undertaken by the Danish Atomic Energy Commission required the fabrication of metal mirrors measuring 1 m long by 53 mm wide, which had to be finished to extremely tight tolerances on thickness, plane-parallelism and surface characteristics. Progressively finer diamond compounds...... are employed to achieve a high gloss finish on the metal mirrors, which are used in polarized neutron experiments. This article describes the fabrication techniques developed at the Commission's Ris phi Central Workshop....

  11. Solder flow over fine line PWB surface finishes

    Energy Technology Data Exchange (ETDEWEB)

    Hosking, F.M.; Hernandez, C.L.

    1998-08-01

    The rapid advancement of interconnect technology has stimulated the development of alternative printed wiring board (PWB) surface finishes to enhance the solderability of standard copper and solder-coated surfaces. These new finishes are based on either metallic or organic chemistries. As part of an ongoing solderability study, Sandia National Laboratories has investigated the solder flow behavior of two azole-based organic solderability preservations, immersion Au, immersion Ag, electroless Pd, and electroless Pd/Ni on fine line copper features. The coated substrates were solder tested in the as-fabricated and environmentally-stressed conditions. Samples were processed through an inerted reflow machine. The azole-based coatings generally provided the most effective protection after aging. Thin Pd over Cu yielded the best wetting results of the metallic coatings, with complete dissolution of the Pd overcoat and wetting of the underlying Cu by the flowing solder. Limited wetting was measured on the thicker Pd and Pd over Ni finishes, which were not completely dissolved by the molten solder. The immersion Au and Ag finishes yielded the lowest wetted lengths, respectively. These general differences in solderability were directly attributed to the type of surface finish which the solder came in contact with. The effects of circuit geometry, surface finish, stressing, and solder processing conditions are discussed.

  12. Chromium, CLA, and ractopamine for finishing pigs.

    Science.gov (United States)

    Marcolla, C S; Holanda, D M; Ferreira, S V; Rocha, G C; Serão, N V L; Duarte, M S; Abreu, M L T; Saraiva, A

    2017-10-01

    This study aimed to evaluate the effects of dietary chromium, CLA, and ractopamine on performance, carcass traits, and pork quality of finishing pigs slaughtered at 115 kg BW. Ninety-six crossbred barrows (initial BW = 70.21 ± 1.98 kg) were randomly assigned to 1 of 6 dietary treatments. There were 8 replicates per treatment (48 pens; 2 pigs/pen). A diet formulated according to the nutritional requirements was used as the control (CON). The other 5 diets were based on the CON and supplemented as follows: 0.4 mg/kg Cr yeast (CrY); 0.5% CLA; 0.4 mg/kg CrY and 0.5% CLA (CrY + CLA); 20 mg/kg ractopamine (RAC); 0.4 mg/kg CrY and 20 mg/kg RAC (CrY + RAC). Lysine levels on diets containing ractopamine were raised by 20% compared to CON to meet the greater requirements of pigs fed ractopamine. Pigs fed RAC and CrY + RAC were fed CON for the first 17 d, and then the respective diets for the last 28 d on trial. Data were analyzed in a model including the fixed effect of treatment (6 levels) and initial BW as a covariate for all characteristics, with the exception of carcass traits, in which final BW was used as a covariate. Least-squares means were separated using Tukey-Kramer's method. Differences were considered when probability values were lower than 0.05. Pigs fed RAC and CrY + RAC had the greatest ( 0.05) pork quality, except for color. No differences ( > 0.05) were observed for carcasses pH and temperature. The values for pigs fed RAC were greater ( = 0.01) than pigs fed other diets. Pigs fed RAC had lower ( < 0.01) values compared to pigs fed other experimental diets. Serum urea nitrogen concentration (SUN) was lower ( = 0.02) in pigs fed CrY + RAC than in pigs fed CON and RAC and similar to pigs fed the other feeding additives. In summary, it was demonstrated that, when combined, CrY and RAC increase LM area and carcass yield, and reduce SUN, suggesting that chromium could improve nutrient utilization by muscle cells in RAC-fed pigs. Additionally, the additives have

  13. Leaf Area Index Retrieval Combining HJ1/CCD and Landsat8/OLI Data in the Heihe River Basin, China

    Directory of Open Access Journals (Sweden)

    Jing Zhao

    2015-05-01

    Full Text Available The primary restriction on high resolution remote sensing data is the limit observation frequency. Using a network of multiple sensors is an efficient approach to increase the observations in a specific period. This study explores a leaf area index (LAI inversion method based on a 30 m multi-sensor dataset generated from HJ1/CCD and Landsat8/OLI, from June to August 2013 in the middle reach of the Heihe River Basin, China. The characteristics of the multi-sensor dataset, including the percentage of valid observations, the distribution of observation angles and the variation between different sensor observations, were analyzed. To reduce the possible discrepancy between different satellite sensors on LAI inversion, a quality control system for the observations was designed. LAI is retrieved from the high quality of single-sensor observations based on a look-up table constructed by a unified model. The averaged LAI inversion over a 10-day period is set as the synthetic LAI value. The percentage of valid LAI inversions increases significantly from 6.4% to 49.7% for single-sensors to 75.9% for multi-sensors. LAI retrieved from the multi-sensor dataset show good agreement with the field measurements. The correlation coefficient (R2 is 0.90, and the average root mean square error (RMSE is 0.42. The network of multiple sensors with 30 m spatial resolution can generate LAI products with reasonable accuracy and meaningful temporal resolution.

  14. Evaluation of automatic cloud removal method for high elevation areas in Landsat 8 OLI images to improve environmental indexes computation

    Science.gov (United States)

    Alvarez, César I.; Teodoro, Ana; Tierra, Alfonso

    2017-10-01

    Thin clouds in the optical remote sensing data are frequent and in most of the cases don't allow to have a pure surface data in order to calculate some indexes as Normalized Difference Vegetation Index (NDVI). This paper aims to evaluate the Automatic Cloud Removal Method (ACRM) algorithm over a high elevation city like Quito (Ecuador), with an altitude of 2800 meters above sea level, where the clouds are presented all the year. The ACRM is an algorithm that considers a linear regression between each Landsat 8 OLI band and the Cirrus band using the slope obtained with the linear regression established. This algorithm was employed without any reference image or mask to try to remove the clouds. The results of the application of the ACRM algorithm over Quito didn't show a good performance. Therefore, was considered improving this algorithm using a different slope value data (ACMR Improved). After, the NDVI computation was compared with a reference NDVI MODIS data (MOD13Q1). The ACMR Improved algorithm had a successful result when compared with the original ACRM algorithm. In the future, this Improved ACRM algorithm needs to be tested in different regions of the world with different conditions to evaluate if the algorithm works successfully for all conditions.

  15. Orthodontic treatment outcomes obtained by application of a finishing protocol

    Directory of Open Access Journals (Sweden)

    Alvaro Carvajal-Flórez

    2016-04-01

    Full Text Available ABSTRACT Objective: To evaluate the results of a finishing protocol implemented in patients treated in the Orthodontics graduate program at Universidad de Antioquia. Evaluation was carried out by means of the criteria set by the Objective Grading System (OGS of the American Board of Orthodontics (ABO. Methods: Cast models and panoramic radiographs of 34 patients were evaluated. The intervention group (IG consisted of 17 patients (19.88 ± 4.4 years old treated under a finishing protocol. This protocol included training in finishing, application of a finishing guide, brackets repositioning and patient's follow-up. Results of the IG were compared to a control group of 17 patients (21.88 ± 7.0 years old selected by stratified randomization without finishing intervention (CG. Results: The scores for both CG and IG were 38.00 ± 9.0 and 31.41 ± 9.6 (p = 0.048, respectively. The score improved significantly in the IG group, mainly regarding marginal ridges (CG: 5.59 ± 2.2; IG: 3.65 ± 1.8 (p = 0.009 and root angulation (CG: 7.59 ± 2.8; IG: 4.88 ± 2.6 (p = 0.007. Criteria that did not improve, but had the highest scores were: alignment (CG: 6.35 ± 2.7; IG: 6.82 ± 2.8 (p = 0.62 and buccolingual inclination (CG: 3.6 ± 5.88; IG: 5.29 ± 3.9 (p = 0.65. Conclusions: Standardization and implementation of a finishing protocol contributed to improve clinical performance in the Orthodontics graduate program, as expressed by occlusal outcomes. Greater emphasis should be given on the finishing phase to achieve lower scores in the ABO grading system.

  16. Comparison of hyperspectral transformation accuracies of multispectral Landsat TM, ETM+, OLI and EO-1 ALI images for detecting minerals in a geothermal prospect area

    Science.gov (United States)

    Hoang, Nguyen Tien; Koike, Katsuaki

    2018-03-01

    Hyperspectral remote sensing generally provides more detailed spectral information and greater accuracy than multispectral remote sensing for identification of surface materials. However, there have been no hyperspectral imagers that cover the entire Earth surface. This lack points to a need for producing pseudo-hyperspectral imagery by hyperspectral transformation from multispectral images. We have recently developed such a method, a Pseudo-Hyperspectral Image Transformation Algorithm (PHITA), which transforms Landsat 7 ETM+ images into pseudo-EO-1 Hyperion images using multiple linear regression models of ETM+ and Hyperion band reflectance data. This study extends the PHITA to transform TM, OLI, and EO-1 ALI sensor images into pseudo-Hyperion images. By choosing a part of the Fish Lake Valley geothermal prospect area in the western United States for study, the pseudo-Hyperion images produced from the TM, ETM+, OLI, and ALI images by PHITA were confirmed to be applicable to mineral mapping. Using a reference map as the truth, three main minerals (muscovite and chlorite mixture, opal, and calcite) were identified with high overall accuracies from the pseudo-images (> 95% and > 42% for excluding and including unclassified pixels, respectively). The highest accuracy was obtained from the ALI image, followed by ETM+, TM, and OLI images in descending order. The TM, OLI, and ALI images can be alternatives to ETM+ imagery for the hyperspectral transformation that aids the production of pseudo-Hyperion images for areas without high-quality ETM+ images because of scan line corrector failure, and for long-term global monitoring of land surfaces.

  17. Cross-Calibration of GF-1/WFV over a Desert Site Using Landsat-8/OLI Imagery and ZY-3/TLC Data

    Directory of Open Access Journals (Sweden)

    Aixia Yang

    2015-08-01

    Full Text Available The wide field of view (WFV is an optical imaging sensor on-board the Gao Fen 1 (GF-1. The WFV lacks an on-board calibrator, so on-orbit radiometric calibration is required. Zhong et al. proposed a method for cross-calibrating the charge-coupled device on-board the Chinese Huan Jing 1 (HJ-1/CCD that can be applied to the GF-1/WFV. However, the accuracy is limited because of the wider radiometric dynamic range and the higher spatial resolution of the GF-1/WFV. Therefore, Landsat-8 Operational Land Imager (OLI imagery with a radiometric resolution similar to that of the GF-1/WFV and DEM extracted from ZY-3 three-line array panchromatic camera (TLC with a higher spatial resolution were used. A calibration site with uniform surface material and a natural topographic variation was selected, and a model of this site’s bidirectional reflectance distribution function (BRDF was developed. The model has excellent agreement with the real situation, as shown by the comparison of the simulations to the actual OLI surface reflectance. Then, the model was used to calibrate the WFV. Compared with the TOA reflectance from synchronized Landsat-8/OLI images, all errors calculated with the calibration coefficients retrieved in this paper are less than 5%, much less than the errors calculated with the calibration coefficients given by the China Centre for Resource Satellite Data and Application (CRESDA.

  18. Persistence of antimicrobial resistance genes from sows to finisher pigs

    DEFF Research Database (Denmark)

    Birkegård, Anna Camilla; Halasa, Tariq; Folkesson, Anders

    2018-01-01

    Antimicrobial resistance in pigs has been under scrutiny for many years. However, many questions remain unanswered, including whether the initial antimicrobial resistance level of a pig will influence the antimicrobial resistance found at slaughter. Faecal samples from finishers pigs from 681 farms...... and from sows from 82 farms were collected, and levels of seven antimicrobial resistance genes, ermB, ermF, sulI, sulII, tet(M), tet(O), and tet(W), were quantified by high-capacity qPCR. There were 40 pairs of observations where the finishers were born in the farms of the sows. The objective of this study...... was to evaluate whether the levels of AMR genes found in finisher pigs at slaughter were associated with the levels in the farm where the finishers were born, and whether the levels of the AMR genes were equal in the sow and finisher pig populations. We found a significant positive correlation between the levels...

  19. Early Spring Post-Fire Snow Albedo Dynamics in High Latitude Boreal Forests Using Landsat-8 OLI Data

    Science.gov (United States)

    Wang, Zhuosen; Erb, Angela M.; Schaaf, Crystal B.; Sun, Qingsong; Liu, Yan; Yang, Yun; Shuai, Yanmin; Casey, Kimberly A.; Roman, Miguel O.

    2016-01-01

    Taking advantage of the improved radiometric resolution of Landsat-8 OLI which, unlike previous Landsat sensors, does not saturate over snow, the progress of fire recovery progress at the landscape scale (less than 100 m) is examined. High quality Landsat-8 albedo retrievals can now capture the true reflective and layered character of snow cover over a full range of land surface conditions and vegetation densities. This new capability particularly improves the assessment of post-fire vegetation dynamics across low- to high-burn severity gradients in Arctic and boreal regions in the early spring, when the albedos during recovery show the greatest variation. We use 30 m resolution Landsat-8 surface reflectances with concurrent coarser resolution (500 m) MODIS high quality full inversion surface Bidirectional Reflectance Distribution Functions (BRDF) products to produce higher resolution values of surface albedo. The high resolution full expression shortwave blue sky albedo product performs well with an overall RMSE of 0.0267 between tower and satellite measures under both snow-free and snow-covered conditions. While the importance of post-fire albedo recovery can be discerned from the MODIS albedo product at regional and global scales, our study addresses the particular importance of early spring post-fire albedo recovery at the landscape scale by considering the significant spatial heterogeneity of burn severity, and the impact of snow on the early spring albedo of various vegetation recovery types. We found that variations in early spring albedo within a single MODIS gridded pixel can be larger than 0.6. Since the frequency and severity of wildfires in Arctic and boreal systems is expected to increase in the coming decades, the dynamics of albedo in response to these rapid surface changes will increasingly impact the energy balance and contribute to other climate processes and physical feedback mechanisms. Surface radiation products derived from Landsat-8 data will

  20. A Bi-Band Binary Mask Based Land-Use Change Detection Using Landsat 8 OLI Imagery

    Directory of Open Access Journals (Sweden)

    Xian Li

    2017-03-01

    Full Text Available Land use and cover change (LUCC is important for the global biogeochemical cycle and ecosystem. This paper introduced a change detection method based on a bi-band binary mask and an improved fuzzy c-means algorithm to research the LUCC. First, the bi-band binary mask approach with the core concept being the correlation coefficients between bands from different images are used to locate target areas with a likelihood of having changed areas. Second, the improved fuzzy c-means (FCM algorithm was used to execute classification on the target areas. This improved algorithm used distances to the Voronoi cell of the cluster instead of the Euclidean distance to the cluster center in the calculation of membership, and some other improvements were also used to decrease the loops and save time. Third, the post classification comparison was executed to get more accurate change information. As references, change detection using univariate band binary mask and NDVI binary mask were executed. The change detection methods were applied to Landsat 8 OLI images acquired in 2013 and 2015 to map LUCC in Chengwu, north China. The accuracy assessment was executed on classification results and change detection results. The overall accuracy of classification results of the improved FCM is 95.70% and the standard FCM is 84.40%. The average accuracy of change detection results using bi-band mask is 88.92%, using NDVI mask is 81.95%, and using univariate band binary mask is 56.01%. The result of the bi-band mask change detection shows that the change from farmland to built land is the main change type in the study area: total area is 9.03 km2. The developed method in the current study can be an effective approach to evaluate the LUCC and the results helpful for the land policy makers.

  1. Identifying Distribution of Chlorophyll-a Concentration Using Landsat 8 OLI on Marine Waters Area of Cirebon

    Science.gov (United States)

    Buditama, Gilang; Damayanti, Astrid; Giok Pin, Tjiong

    2017-12-01

    Phytoplankton is a microscopic plant that has a function to produces oxygen and organic substances. It also plays a role as a main producer in the food chain of a marine ecosystem. Chlorophyll-a is a colour pigment most common in phytoplankton species, so that the concentration level of chlorophyll-a can be used as an indicator of the abundance of phytoplankton cells, and as a reference for predicting organic potency in the aquatic area. This research discusses about the spatial and temporal distribution of chlorophyll-a and its correlation with salinity and total suspended solid (TSS), in the seawaters of Cirebon, West Java. The goal of this research is to be a source of information for fishermen, and other stakeholders whose related subjects in the field of marine and fisheries to predict fertile water regions and can also be used as an indicator in discovering potential areas to catch pelagic fish in Cirebon seawaters. Chlorophyll-a concentration, salinity, and TSS are identified using remote sensing data such as Landsat-8 OLI multi temporal images according to dry and wet month parameters in the 2014-2015. The results of the processed image are then validated between in-situ measurements in the field and remote sensing imagery at the same time. This research utilizes descriptive analysis, and statistics with spatial approach. The results of the research show that temporally, chlorophyll-a levels have a tendency to be higher in wet months compared to dry months, while chlorophyll-a is higher in areas near the coastline compared to open sea areas. The distribution of chlorophyll-a concentration is affected by salinity and TSS distribution, where salinity has the negative relationship and TSS has the positive relationship with chlorophyll-a distribution.

  2. Tool steel quality and surface finishing of plastic molds

    Directory of Open Access Journals (Sweden)

    Rafael Agnelli Mesquita

    2010-01-01

    Full Text Available Plastic industry is today in a constant growth, demanding several products from other segments, which includes the plastic molds, mainly used in the injection molding process. Considering all the requirements of plastic molds, the surface finishing is of special interest, as the injected plastic part is able to reproduce any details (and also defects from the mold surface. Therefore, several aspects on mold finishing are important, mainly related to manufacturing conditions - machining, grinding, polishing and texturing, and also related to the tool steel quality, in relation to microstructure homogeneity and non-metallic inclusions (cleanliness. The present paper is then focused on this interrelationship between steel quality and manufacturing process, which are both related to the final quality of plastic mold surfaces. Examples are discussed in terms of surface finishing of plastic molds and the properties or the microstructure of mold steels.

  3. Analytical methods for the characterization of surface finishing in bricks

    International Nuclear Information System (INIS)

    Nardini, I.; Zendri, E.; Biscontin, G.; Brunetin, A.

    2006-01-01

    The recent restoration works of Santo Stefano Church Facade (XV century) in Venice have shown traces variously saved of different kind of surface finishes. These finishes were found on the brick's surface both in the masonry and in the decorative elements. Different brick's surface and decorative tile samples were investigated using several techniques: optical microscopy, scanning electron-microscopy, thermal analysis, infrared spectroscopy and reflectance Fourier transform infrared microspectroscopy. The evaluation of the reached results was used to understand the decorative techniques and to recognize the material employed

  4. Informatiedocument afgewerkte olie

    NARCIS (Netherlands)

    Nieuwenhuis JW; de Zeeuw JH; Meijer PJ; Verhagen H

    1990-01-01

    This "informative document waste oil" forms part of a series of informative documents waste materials". These documents are conducted by RIVM on the instructions of the Directorate General for the Environment, Waste Materials Directorate, in behalf of the program of action on

  5. 21 CFR 106.30 - Finished product evaluation.

    Science.gov (United States)

    2010-04-01

    ... analyzed by the manufacturer. (2) Periodic analysis. The manufacturer shall sample at least one newly...) Stability analysis. Using representative samples collected from finished product batches, the manufacturer... the biological quality of the protein. A protein biological quality analysis is not necessary for a...

  6. Performance, organ growth and economics of finisher broiler fed ...

    African Journals Online (AJOL)

    A 28-day feeding trial was conducted to evaluate the effects of dietary inclusion of neem (Azadirachta indica) leaf meal on the performance, organ growth and economics of finishing broilers. The harvested neem leaves were chopped and air dried under room temperature for ten days until they became crispy while retaining ...

  7. Comparison of triticale cultivars with maize grain for finishing lambs ...

    African Journals Online (AJOL)

    Comparison of triticale cultivars with maize grain for finishing lambs. TS Brand, GD van der Merwe. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  8. Effect of Moringa oleifera leaf meal on finisher pig growth ...

    African Journals Online (AJOL)

    Felistus

    2014-12-12

    Dec 12, 2014 ... 2 Department of Microbial Biochemical and Food Biotechnology, University of the Free State,. P.O. Box 339 ... finisher pig feed with no negative effect on feed conversion efficiency, carcass and meat quality traits, and ... Keywords: Moringa oleifera, anti-nutrient factors, fatty acid ratios, pork colour, pork odour.

  9. Response of finishing broiler chickens to supplemental Neem ...

    African Journals Online (AJOL)

    An eight weeks feeding trial was conducted to investigate the effects of feeding diets containing Neem Leaf Meal (NLM), Garlic Meal (GM) and their combinations (NLM +GM) on oocyst count, bacteria count and gut morphology of finishing broiler chickens. A total of 180 day-old Cobb broiler chickens were divided into twelve ...

  10. Serum biochemical indices of Finisher Broiler Chickens fed diets ...

    African Journals Online (AJOL)

    A 4 week feeding trial was conducted using 180 five-week old Hubbard broiler chickens to determine the effect of feeding variously processed roselle(Hibiscus sabdariffa) seeds on serum biochemical indices with a view to determining the potential of roselle seed as an alternative to soybeans. Five broiler finisher diets were ...

  11. Response of finishing broiler chickens to diets containing rumen ...

    African Journals Online (AJOL)

    One hundred and fifty Arbor acres broiler chickens aged four weeks were used in determining the effect of fermented rice husk meal diets on the performance and nutrient digestibility of finisher broiler chickens. They were allotted into five dietary treatments containing 0, 5, 10, 15 and 20 % rumen liquor fermented rice husk ...

  12. Assessment of the nutrient contents of broiler starter and finisher ...

    African Journals Online (AJOL)

    While crude protein, arginine, isoleucine, methionine, lysine, threonine, methionine+cystein and phenylalanine contents were similar (P>0.05), leucine, valine, phenylalaline+thyrocine and glycine+serine values of the test finisher diets were significantly (P<0.05) different from NRC recommendation for broilers aged 3-6 ...

  13. Two-dimensional kinematic analysis of catch and finish positions ...

    African Journals Online (AJOL)

    ... enough to increase the frequency of drive. As the rowing distance got longer, rowers started to change their body angles and action. Performance could be improved by maintaining suitable rowing technique during competition. Keywords: Biomechanics; Rowing; Catch and finish positions; Concept IID rowing ergometer.

  14. Effect of finishing system on carcass characteristics and composition ...

    African Journals Online (AJOL)

    Effect of finishing system on carcass characteristics and composition of Mubende goats and their Boer goat crossbreds. ... Dissectible lean and fat percentages varied in an ascending order of 66%, 72%, 72.6% and 8%, 14% and 16.5% for T1, T2 and T3, respectively. A reverse trend was observed for bone percentages with ...

  15. Performance and nutrient utilization of cockerel finishers fed graded ...

    African Journals Online (AJOL)

    RMW) on performance and nutrient utilization of cockerel finishers. One hundred and fifty 9-week old Black Harco cockerels were raised on five experimental diets where RMW replaced maize at graded levels and designated diet 1 (0% RMW); diet ...

  16. Abrasive properties of modified oxides for finish polishing of steel

    Science.gov (United States)

    Koroleva, L. F.

    2017-12-01

    The study of modified chromium and aluminum oxides, demonstrates that finish polishing by modified hydroxocomplexes based on a solid solution of iron and aluminum oxides provide a surface nanoroughness of 0.02 to 0.005 µm for the hardened ShKh15 steel (American Standard AISI 52100).

  17. Course in Carpentry: Interior Finish. Workbook and Tests.

    Science.gov (United States)

    Strazicich, Mirko, Ed.

    Designed for use in carpentry apprenticeship classes, this workbook contains nine units on carpentry skills in the area of interior finish, lists of recommended and required instructional materials, and nine unit tests. Each instructional unit includes a listing of performance statements and text covering skills addressed in individual performance…

  18. Fungal biodegradation of plantain peel for broiler finisher feeding: In ...

    African Journals Online (AJOL)

    ... protein, cholesterol and glucose were significantly (P<0.05) affected by the treatments. Fungal biodegradation of PPL using A.niger has the potential of enhancing feed intake, nutrient digestibility and the body weight gain of broiler finisher. Keywords: Aspergillus niger, biodegradation, nutrient enhancement and broilers.

  19. Response Of Finisher Broilers To Antibiotic and Enzyme ...

    African Journals Online (AJOL)

    A 28 – day feeding trial was conducted to evaluate the response of finisher broilers to antibiotic (neocloxin) and enzyme (Roxazyme G) supplemented diets. Three experimental diets were formulated such that diet 1 had neither enzyme nor antibiotic supplementation. Diets 2 and 3 contained antibiotic and enzyme ...

  20. Prevalence of intestinal pathogens in Danish finishing pig herds

    DEFF Research Database (Denmark)

    Stege, H.; Jensen, Tim Kåre; Møller, Kristian

    2000-01-01

    finishing pig herds. A total of 79 herds was randomly selected and visited during 1998. From each herd, 20 faecal samples were collected from individual pigs weighing 30-50kg. Furthermore, 10 pooled pen samples were collected and examined for S. enterica. In total, 1580 faecal samples and 790 pen samples...

  1. Performance Of Growing Pigs And Finisher Broilers Housed Together

    African Journals Online (AJOL)

    Growth performance and cost of feeding young growing pigs and finisher broilers under integrated broiler/pig production system were investigated. Four young growing pigs (the control) were housed in pen A and fed 4% of their body weight as commercial growers feed. Another 4 were housed in pen B with broilers in ...

  2. Effect of Moringa oleifera leaf meal on finisher pig growth ...

    African Journals Online (AJOL)

    Effect of Moringa oleifera leaf meal on finisher pig growth performance, meat quality, shelf life and fatty acid composition of pork. ... Muscle, subcutaneous fat and feed samples were analysed for FA composition and health lipid indices of atherogenicity (AI) and thrombogenicity (IT) were calculated. A 10-day shelf-life study ...

  3. Relevance of microbial finished product testing in food safety management

    NARCIS (Netherlands)

    Zwietering, M.H.; Jacxsens, L.; Membre, J.M.; Nauta, M.; Peterz, M.

    2016-01-01

    Management of microbiological food safety is largely based on good design of processes, products and procedures. Finished product testing may be considered as a control measure at the end of the production process. However, testing gives only very limited information on the safety status of a food.

  4. ABILITY OF LANDSAT-8 OLI DERIVED TEXTURE METRICS IN ESTIMATING ABOVEGROUND CARBON STOCKS OF COPPICE OAK FORESTS

    Directory of Open Access Journals (Sweden)

    A. Safari

    2016-06-01

    Full Text Available The role of forests as a reservoir for carbon has prompted the need for timely and reliable estimation of aboveground carbon stocks. Since measurement of aboveground carbon stocks of forests is a destructive, costly and time-consuming activity, aerial and satellite remote sensing techniques have gained many attentions in this field. Despite the fact that using aerial data for predicting aboveground carbon stocks has been proved as a highly accurate method, there are challenges related to high acquisition costs, small area coverage, and limited availability of these data. These challenges are more critical for non-commercial forests located in low-income countries. Landsat program provides repetitive acquisition of high-resolution multispectral data, which are freely available. The aim of this study was to assess the potential of multispectral Landsat 8 Operational Land Imager (OLI derived texture metrics in quantifying aboveground carbon stocks of coppice Oak forests in Zagros Mountains, Iran. We used four different window sizes (3×3, 5×5, 7×7, and 9×9, and four different offsets ([0,1], [1,1], [1,0], and [1,-1] to derive nine texture metrics (angular second moment, contrast, correlation, dissimilar, entropy, homogeneity, inverse difference, mean, and variance from four bands (blue, green, red, and infrared. Totally, 124 sample plots in two different forests were measured and carbon was calculated using species-specific allometric models. Stepwise regression analysis was applied to estimate biomass from derived metrics. Results showed that, in general, larger size of window for deriving texture metrics resulted models with better fitting parameters. In addition, the correlation of the spectral bands for deriving texture metrics in regression models was ranked as b4>b3>b2>b5. The best offset was [1,-1]. Amongst the different metrics, mean and entropy were entered in most of the regression models. Overall, different models based on derived

  5. Ability of LANDSAT-8 Oli Derived Texture Metrics in Estimating Aboveground Carbon Stocks of Coppice Oak Forests

    Science.gov (United States)

    Safari, A.; Sohrabi, H.

    2016-06-01

    The role of forests as a reservoir for carbon has prompted the need for timely and reliable estimation of aboveground carbon stocks. Since measurement of aboveground carbon stocks of forests is a destructive, costly and time-consuming activity, aerial and satellite remote sensing techniques have gained many attentions in this field. Despite the fact that using aerial data for predicting aboveground carbon stocks has been proved as a highly accurate method, there are challenges related to high acquisition costs, small area coverage, and limited availability of these data. These challenges are more critical for non-commercial forests located in low-income countries. Landsat program provides repetitive acquisition of high-resolution multispectral data, which are freely available. The aim of this study was to assess the potential of multispectral Landsat 8 Operational Land Imager (OLI) derived texture metrics in quantifying aboveground carbon stocks of coppice Oak forests in Zagros Mountains, Iran. We used four different window sizes (3×3, 5×5, 7×7, and 9×9), and four different offsets ([0,1], [1,1], [1,0], and [1,-1]) to derive nine texture metrics (angular second moment, contrast, correlation, dissimilar, entropy, homogeneity, inverse difference, mean, and variance) from four bands (blue, green, red, and infrared). Totally, 124 sample plots in two different forests were measured and carbon was calculated using species-specific allometric models. Stepwise regression analysis was applied to estimate biomass from derived metrics. Results showed that, in general, larger size of window for deriving texture metrics resulted models with better fitting parameters. In addition, the correlation of the spectral bands for deriving texture metrics in regression models was ranked as b4>b3>b2>b5. The best offset was [1,-1]. Amongst the different metrics, mean and entropy were entered in most of the regression models. Overall, different models based on derived texture metrics

  6. Two Nucleolar Proteins, GDP1 and OLI2, Function As Ribosome Biogenesis Factors and Are Preferentially Involved in Promotion of Leaf Cell Proliferation without Strongly Affecting Leaf Adaxial–Abaxial Patterning in Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Koji Kojima

    2018-01-01

    Full Text Available Leaf abaxial–adaxial patterning is dependent on the mutual repression of leaf polarity genes expressed either adaxially or abaxially. In Arabidopsis thaliana, this process is strongly affected by mutations in ribosomal protein genes and in ribosome biogenesis genes in a sensitized genetic background, such as asymmetric leaves2 (as2. Most ribosome-related mutants by themselves do not show leaf abaxialization, and one of their typical phenotypes is the formation of pointed rather than rounded leaves. In this study, we characterized two ribosome-related mutants to understand how ribosome biogenesis is linked to several aspects of leaf development. Previously, we isolated oligocellula2 (oli2 which exhibits the pointed-leaf phenotype and has a cell proliferation defect. OLI2 encodes a homolog of Nop2 in Saccharomyces cerevisiae, a ribosome biogenesis factor involved in pre-60S subunit maturation. In this study, we found another pointed-leaf mutant that carries a mutation in a gene encoding an uncharacterized protein with a G-patch domain. Similar to oli2, this mutant, named g-patch domain protein1 (gdp1, has a reduced number of leaf cells. In addition, gdp1 oli2 double mutants showed a strong genetic interaction such that they synergistically impaired cell proliferation in leaves and produced markedly larger cells. On the other hand, they showed additive phenotypes when combined with several known ribosomal protein mutants. Furthermore, these mutants have a defect in pre-rRNA processing. GDP1 and OLI2 are strongly expressed in tissues with high cell proliferation activity, and GDP1-GFP and GFP-OLI2 are localized in the nucleolus. These results suggest that OLI2 and GDP1 are involved in ribosome biogenesis. We then examined the effects of gdp1 and oli2 on adaxial–abaxial patterning by crossing them with as2. Interestingly, neither gdp1 nor oli2 strongly enhanced the leaf polarity defect of as2. Similar results were obtained with as2 gdp1 oli2

  7. Analysis of magnetic abrasive finishing with slotted magnetic pole

    Science.gov (United States)

    Jayswal, S. C.; Jain, V. K.; Dixit, P. M.

    2004-06-01

    Magnetic Abrasive Finishing (MAF) is relatively a new finishing process among the advanced finishing processes in which the workpiece is kept in the magnetic field created by two poles of an electromagnet. The working gap between the workpiece and the magnet is filled with magnetic abrasive particles. A flexible magnetic abrasive brush is formed, acting as a multipoint cutting tool, due to the effect of magnetic field in the working gap. This process is capable of producing the surface finish of nanometer range. Most of the researchers have been using the electromagnet having a slot in it to improve the performance of the process but hardly any information is available about its effect on the process performance. This paper deals with the effect of a slot made in the electromagnet on the forces and surface quality during MAF. An experimental set-up is designed and fabricated for the measurement of the magnetic field distribution in the working gap. The magnetic field is simulated using a finite element model of the process. The magnetic field is also measured experimentally to validate the theoretical results. It indicates a good agreement between the experimental results and simulated values. The finite element method is further used for the evaluation of the magnetic force and surface quality during MAF. To our surprise it is found that the force under the slot is negative, even then process performance is improved. MAF process removes a very small amount of material by indentation and rotation of the magnetic abrasive particles in the circular tracks. Due to rotation of the magnetic abrasive flexible brush, grooves are formed on the workpiece surface which decides the surface profile after MAF. Surface quality is determined on the basis of the surface profile achieved by equating the volume of groove produced. These results show an improvement in finishing rate while using a slotted pole surface.

  8. Investigation of Floor Surface Finishes for Optimal Slip Resistance Performance

    Directory of Open Access Journals (Sweden)

    In-Ju Kim

    2018-03-01

    Full Text Available Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents. Keywords: floor surface finishes, operational levels of floor surface roughness, slip resistance, wet, soapy and oily environments

  9. Proceedings of national executive management seminar on surface finishing by radiation curing technology: radiation curing for better finishing

    International Nuclear Information System (INIS)

    1993-01-01

    This book compiled the paper presented at this seminar. The papers discussed are 1. Incentives for investment in the manufacturing sector (in Malaysia) 2.Trends and prospect of surface finishing by radiation curing technology in Malaysia 3. Industrial application of radiation curing

  10. Integrating Data of ASTER and Landsat-8 OLI (AO for Hydrothermal Alteration Mineral Mapping in Duolong Porphyry Cu-Au Deposit, Tibetan Plateau, China

    Directory of Open Access Journals (Sweden)

    Tingbin Zhang

    2016-10-01

    Full Text Available One of the most important characteristics of porphyry copper deposits (PCDs is the type and distribution pattern of alteration zones which can be used for screening and recognizing these deposits. Hydrothermal alteration minerals with diagnostic spectral absorption properties in the visible and near-infrared (VNIR through the shortwave infrared (SWIR regions can be identified by multispectral and hyperspectral remote sensing data. Six Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER bands in SWIR have been shown to be effective in the mapping of Al-OH, Fe-OH, Mg-OH group minerals. The five VNIR bands of Landsat-8 (L8 Operational Land Imager (OLI are useful for discriminating ferric iron alteration minerals. In the absence of complete hyperspectral coverage area, an opportunity, however, exists to integrate ASTER and L8-OLI (AO to compensate each other’s shortcomings in covering area for mineral mapping. This study examines the potential of AO data in mineral mapping in an arid area of the Duolong porphyry Cu-Au deposit(Tibetan Plateau in China by using spectral analysis techniques. Results show the following conclusions: (1 Combination of ASTER and L8-OLI data (AO has more mineral information content than either alone; (2 The Duolong PCD alteration zones of phyllic, argillic and propylitic zones are mapped using ASTER SWIR bands and the iron-bearing mineral information is best mapped using AO VNIR bands; (3 The multispectral integration data of AO can provide a compensatory data of ASTER VNIR bands for iron-bearing mineral mapping in the arid and semi-arid areas.

  11. Pemodelan Dan Analisis Pengaruh Variasi Oli dan Diameter Orifice terhadap Gaya Redam Shock Absorber Dan Respon Dinamis Sepeda Motor Yamaha Jupiter Z 2008

    Directory of Open Access Journals (Sweden)

    Newanda Asa Wahid

    2017-03-01

    Full Text Available Sepeda motor merupakan moda transportasi yang paling banyak diminati oleh masyarakat Indonesia. Dalam hal kenyamanan, maka komponen sepeda motor yang berperan penting adalah sistem suspensi. Sistem suspensi berfungsi menyerap getaran berlebih akibat profil permukaan jalan, sehingga meningkatkan kenyamanan dan keamanan. Oleh karena itu, perlu dilakukan penelitian untuk mendapatkan sistem suspensi yang terbaik. Dalam tugas akhir ini dilakukan pemodelan dan analisis pengaruh perubahan parameter sistem suspensi sepeda motor Yamaha Jupiter Z 2008 khususnya pada komponen monotube hydraulic shock absorber yang didasarkan pada pemodelan setengah kendaraan. Parameter yang divariasikan adalah tipe oli dan diameter orifice, dimana terdapat 5 macam tipe oli dengan rentang nilai massa jenis (ρ sebesar 845 – 874 kg/m3, dan viskositas (ν sebesar 11,3 – 46 mm2/s, sementara untuk diameter orifice yaitu saat kompresi (Docomp sebesar 1,2 – 1,5 mm, saat ekspansi (Doexp sebesar 0,8 – 1 mm. Input yang digunakan pada simulasi adalah input sinusoidal dan input bump modified. Dari penelitian ini didapatkan hasil bahwa sistem suspensi modifikasi monotube hydraulic shock absorber yang menghasilkan gaya redam optimal memiliki nilai parameter viskositas kinematis oli 46 mm2/s, massa jenis oli 845 kg/m3, diameter orifice kompresi 0,00135 m, dan diameter orifice ekspansi 0,0009 m. Nilai gaya redam optimal yang dihasilkan sistem suspensi modifikasi adalah sebesar 1171,3 N, lebih tinggi hingga 546,44 N dibandingkan dengan gaya redam sistem supensi asli yang bernilai 624,86 N pada frekuensi 2 Hz. Pada sistem setengah kendaraan motor dengan penggunaan sistem suspensi asli maupun modifikasi, untuk input bump, respon kendaraan dan penumpang mencapai steady state kurang dari 2 detik dan 5 detik, sedangkan untuk input sinusoidal responnya mencapai steady state kurang dari 2 detik dan 3 detik. Penggunaan suspensi asli maupun modifikasi menghasilkan nilai perpindahan RMS yang

  12. L'oli d'oliva millora l'eficàcia del tractament del càncer de bufeta

    OpenAIRE

    Noguera, Estela

    2016-01-01

    Espanya és un dels països amb més pacients afectats pel càncer de bufeta al món. Recentment s'ha descobert que l'oli d'oliva és de gran ajuda per millorar el tractament que reben els pacients. Investigadors de la UAB responsables de la troballa, que encara no s'ha testat en humans, expliquen com aquest elixir mediterrani fa que una teràpia basada en l'administració de bacteris actuï amb major èxit contra el tumor.

  13. Technology of magnetic abrasive finishing in machining of difficult-to-machine alloy complex surface

    Directory of Open Access Journals (Sweden)

    Fujian MA

    2016-10-01

    Full Text Available The technology of magnetic abrasive finishing is one of the important finishing technologies. Combining with low-frequency vibration and ultrasonic vibration, it can attain higher precision, quality and efficiency. The characteristics and the related current research of magnetic abrasive finishing, vibration assisted magnetic abrasive finishing and ultrasonic assisted magnetic abrasive finishing are introduced. According to the characteristics of the difficult-to-machine alloy's complex surface, the important problems for further study are presented to realize the finishing of complex surface with the technology of magnetic abrasive finishing, such as increasing the machining efficiency by enhancing the magnetic flux density of machining gap and compounding of magnetic energy and others, establishing of the control function during machining and the process planning method for magnetic abrasive finishing of complex surface under the space geometry restraint of complex surface on magnetic pole, etc.

  14. Supercritical Fluid Extraction of Nylon 6,6 Fiber Finish and Oligomers

    OpenAIRE

    Porter, Shelley Risch Jr.

    1997-01-01

    Quantitation of the amount of finish applied during fiber manufacturing is an important industrial quality control process. Finish levels that are too low result in excessive fiber and mechanical wear. On the other hand, overly high finish levels may cause residue buildup on the processing equipment. Removal of the finish has traditionally been done with solvents such as chloroform or Freon followed by gravimetric or spectroscopic analysis of the removed mate...

  15. 40 CFR 425.40 - Applicability; description of the retan-wet finish-sides subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the retan-wet finish-sides subcategory. 425.40 Section 425.40 Protection of Environment ENVIRONMENTAL... CATEGORY Retan-Wet Finish-Sides Subcategory § 425.40 Applicability; description of the retan-wet finish...

  16. Construction of a Dip Tank for Finishing Wood Siding or Decking

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Dipping new siding or decking pieces before installation is faster than finishing after installation, and it gets finish on the backside and ends of the pieces, thereby extending their service life. This method is appropriate for any penetrating finish, such as waterrepellent preservatives or semitransparent stains. It may also be used to pre-treat siding with water-...

  17. Nano finish grinding of brittle materials using electrolytic in-process ...

    Indian Academy of Sciences (India)

    \\R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Recent developments in grinding have opened up new avenues for finishing of hard and brittle materials with nano-surface finish, high tolerance and accuracy. Grinding with superabrasive wheels is ... materials up to nano accuracy is a great challenge in the manufacturing industry. Finishing of micro components such as ...

  18. Chronicle of 65 years of wood finishing research at the Forest Products Laboratory

    Science.gov (United States)

    Thomas M. Gorman; William C. Feist

    1989-01-01

    For 65 years, the Forest Products Laboratory (FPL) in Madison, Wisconsin, has had a continuous and extensive program of research on finishing wood for outdoor use. The research has stressed the fundamental aspects of wood weathering and the interactions of pretreatments and finishes on wood surfaces. This report outlines the history of the FPL wood finishing research...

  19. Method and system for processing optical elements using magnetorheological finishing

    Science.gov (United States)

    Menapace, Joseph Arthur; Schaffers, Kathleen Irene; Bayramian, Andrew James; Molander, William A

    2012-09-18

    A method of finishing an optical element includes mounting the optical element in an optical mount having a plurality of fiducials overlapping with the optical element and obtaining a first metrology map for the optical element and the plurality of fiducials. The method also includes obtaining a second metrology map for the optical element without the plurality of fiducials, forming a difference map between the first metrology map and the second metrology map, and aligning the first metrology map and the second metrology map. The method further includes placing mathematical fiducials onto the second metrology map using the difference map to form a third metrology map and associating the third metrology map to the optical element. Moreover, the method includes mounting the optical element in the fixture in an MRF tool, positioning the optical element in the fixture; removing the plurality of fiducials, and finishing the optical element.

  20. Recovery of Salmonella enterica from seropositive finishing pig herds

    DEFF Research Database (Denmark)

    Wong, Danilo Lo Fo; Dahl, J.; van der Wolf, P.J.

    2003-01-01

    The aim of this study was to assess the probability of detecting Salmonella from pen faecal samples in seropositive classified finishing pig herds. The study involved 77 herds from Denmark (20), The Netherlands (20), Greece (17) and Germany (20). The serological herd status was determined...... by the blood-sampling of 50 finishing pigs. Bacteriological sampling was performed by 20 pen faecal samples per herd. Over-all, 47% of the blood samples had an OD% larger than 10 and 23% larger than 40. Salmonella was isolated from 135 (9.3%) pen faecal samples in 32 herds (42%). Twenty-eight of these herds...... (87.5%) had a within-herd seroprevalence larger than 50% at sample cut-off OD% > 10. In our study, there was an increasing probability of recovering Salmonella with increasing within-herd seroprevalence. However, this was only a moderate correlation. A correlation coefficient of 0.62 was found between...

  1. Statistical Analysis of Magnetic Abrasive Finishing (MAF) On Surface Roughness

    Science.gov (United States)

    Givi, Mehrdad; Tehrani, Alireza Fadaei; Mohammadi, Aminollah

    2010-06-01

    Magnetic assisted finishing is one of the nontraditional methods of polishing that recently has been attractive for the researchers. This paper investigates the effects of some parameters such as rotational speed of the permanent magnetic pole, work gap between the permanent pole and the work piece, number of the cycles and the weight of the abrasive particles on aluminum surface plate finishing. The three levels full factorial method was used as the DOE technique (design of experiments) for studying the selected factors. Analysis of Variance (ANOVA) has been used to determine significant factors and also to obtain an equation based on data regression. Experimental results indicate that for a change in surface roughness ΔRa, number of cycles and working gap are found to be the most significant parameters followed by rotational speed and then weight of powders.

  2. Surface profiling in mating parts by combined nonabrasive finishing

    Science.gov (United States)

    Smolentsev, EV; Fedonin, ON; Smolentsev, VP

    2017-02-01

    Nonabrasive finishing of precision mating surfaces in locking devices with the use of a combined erosion-chemical process at the first stage of the processing and with the use of anodic dissolution by alternating low-voltage current at the final stage of a refinement operation till gapless joints obtaining is considered. It is shown that the application of electro-erosion, electrochemical and combined nonabrasive finishing in mating parts opens up a possibility to ensure stable impermeability in locking devices on a macro- and micro-level through the method of a substantiated purpose of technological modes. A procedure is created for the development of such modes, and on their basis technological processes for the obtaining of gapless mating surfaces meeting the performance requirements for locking devices are developed. For this purpose, qualitative devices resistant to hostile environment are manufactured that is urgent for the mechanical engineering including repetition work for the equipment of petrochemical industry, transport and household machinery.

  3. Ractopamine in diets for finishing pigs of different sexual categories

    OpenAIRE

    Carlos Enrique da Trindade Barbosa; Carolina Teixeira Costa Silva; Vinícius de Souza Cantarelli; Márcio Gilberto Zangeronimo; Raimundo Vicente de Sousa; Cesar Augusto Pospissil Garbossa; Níkolas de Oliveira Amaral; Walmes Marques Zeviani

    2012-01-01

    Performance and carcass and cut yield of finishing pigs of three sexual categories fed diets with different levels of ractopamine were studied. Forty-eight hybrid animals (initial weight of 92.1±2.4 kg) were distributed in a completely randomised design in 3 × 2 factorial arrangement (three sexual categories: surgically castrated males, two females and immunologically castrated males - with or without 10 ppm of ractopamine), totalling six treatments and eight repetitions with one animal per e...

  4. Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics)

    OpenAIRE

    Brandão,Roberto Carlos Bodart; Brandão,Larissa Bustamente Capucho

    2013-01-01

    OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics) and its correlation with the periodontium (pink esthetics). Standards of normality are described both in their real dimensions (dental height and width), and in those effectively perceived by the observer, the vi...

  5. Prospects for Commercial Feedlot Finishing of Sheep in Zanzibar ...

    African Journals Online (AJOL)

    Evaluation of growth and carcass performance of sheep under two feedlot finishing diets was done in Zanzibar. Fifty-four sheep aged 9-12 months with initial body weight 18.9±0.6kg) were divided into three treatments T1, T2 and T3 each with three replicates. T2 and T3 sheep were assigned randomly to two concentrate ...

  6. The importance of surface finish to energy performance

    Directory of Open Access Journals (Sweden)

    Smith Geoff B.

    2017-01-01

    Full Text Available Power generation in solar energy systems, thermal control in buildings and mitigation of the Urban Heat Island problem, are all sensitive to directional response to incoming radiation. The radiation absorption and emission profile also plays a crucial role in each system's response and depends strongly on surface finish. This important sensitivity needs wider recognition in materials data sheets, system modeling, plus in materials and environmental engineering. The impact of surface roughness on thermal response of natural and man-made external environments is examined. Important examples will be given of the role of surface finish within each class. Total emittance links to the way surface finish influences directional emittance E(θ. Smooth surface thermal emittance on PV module covers, many solar absorbers, some roof paints, polished concrete, and glass windows can be up to 15% different from insulator results based on fully diffuse models of the same material. Widespread evidence indicates smooth metals and low-E solar absorber surfaces cool faster, and smooth insulators slower than previously thought. Matt paint is cooler than low sheen paint under the same solar heating impacts and normal concrete cooler than polished. Emittance for water is the prime environmental example of oblique impacts as it reflects strongly at oblique incidence, which leads to a significant drop in E(θ. Ripples or waves however raise water's average emittance. A surprise in this work was the high sensitivity of total E and its angular components to roughness in the depth range of 0.1–0.8 μm, which are well under ambient thermal IR wavelengths of 3–30 μm but common in metal finishing. Parallel energy flows such as evaporation and convective cooling vary if emittance varies. Thermal image analysis can provide insights into angular radiative effects.

  7. Response of finishing broiler chickens fed three energy/protein ...

    African Journals Online (AJOL)

    A feeding experiment was conducted to investigate the response of finishing broiler chicken to diets containing three metabolizable energy (ME)/crude protein (CP) combinations ( 3203.76 ME vs 19.90 %CP, 2884.15 ME vs 18.10%CP and 2566.42 ME vs 18.10 %CP) at fixed ME:CP ratio of 160:1. A total of 126 four weeks ...

  8. Remote sensing of the chlorophyll-a based on OLI/Landsat-8 and MSI/Sentinel-2A (Barra Bonita reservoir, Brazil

    Directory of Open Access Journals (Sweden)

    FERNANDA WATANABE

    2017-08-01

    Full Text Available ABSTRACT In this present research, we assessed the performance of band algorithms in estimating chlorophyll-a (Chl-a concentration based on bands of two new sensors: Operational Land Imager onboard Landsat-8 satellite (OLI/Landsat-8, and MultiSpectral Instrument onboard Sentinel-2A (MSI/Sentinel-2A. Band combinations designed for Thematic Mapper onboard Landsat-5 satellite (TM/Landsat-5 and MEdium Resolution Imaging Spectrometer onboard Envisat platform (MERIS/Envisat were adapted for OLI/Landsat-8 and MSI/Sentinel-2A bands. Algorithms were calibrated using in situ measurements collected in three field campaigns carried out in different seasons. The study area was the Barra Bonita hydroelectric reservoir (BBHR, a highly productive aquatic system. With exception of the three-band algorithm, the algorithms were spectrally few affected by sensors changes. On the other hands, algorithm performance has been hampered by the bio-optical difference in the reservoir sections, drought in 2014 and pigment packaging.

  9. Application of Landsat 8 OLI Image and Empirical Model for Water Trophic Status Identification of Riam Kanan Reservoir, Banjar, South Kalimantan

    Science.gov (United States)

    Saputra, A. N.; Danoedoro, P.; Kamal, M.

    2017-12-01

    Remote sensing has a potential for observing, mapping and monitoring the quality of lake water. Riam Kanan is a reservoir which has a water resource from Riam Kanan River with the area width of its watershed about 1043 km2. The accumulation of nutrient in this reservoir simultaneously deteriorates the condition of waters, which can cause an increasingly growth of harm micro algae or Harmful Algal Blooms (HABs). This research applied Carlson’s trophic status index (CTSI) at Riam Kanan Reservoir using Landsat-8 OLI satellite image. The Landsat 8 OLI image was recorded on 14 August 2016 and was used in this research based on its surface reflectance values. The result of correlation test shows that band 3 of the image as coefficient of chlorophyll-a parameter, channel 2 as coefficient of phosphate, and band ratio of SDT as coefficient of SDT. Based on the result of modelling using CTSI, the majority scale of CTSI score at Riam Kanan Reservoir is between 60 to70 in medium eutrophic class. The class of medium eutrophic at Riam Kanan Reservoir potentially emerges the threat both of the improvement of water fertility and the reduction of water quality. Improvement of the fertility is apprehensive since it can trigger an explosion of micro algae which will endanger the ecological condition at the area of Riam Kanan Reservoir.

  10. Ageing of Dry Cement Mixes for Finishing Purposes

    Directory of Open Access Journals (Sweden)

    Bronius VEKTARIS

    2013-09-01

    Full Text Available Dry building mixes, stored in the air, absorb water vapor and CO2 gas and ageing because properties of binding materials, mostly Portland cement, deteriorate after its prehydration and carbonation. In this paper the ageing singularities of dry cement mixes for finishing purposes and additives for retarding this process has been determinated. Ordinary and quickly hardening Portland cements absorb H2O and CO2 more than white cement – about 70 % – 75 % and 30 % – 38 % per month of innitial mass, respectively. White cement is more resistant to prehydration and carbonation, because it contains less C3A, C4AF and alkali, characterized initial activity. Dry mixes with white cement, although slower, but still worse after stored. Influence of routine dry mortar mixes ingredients and additives (methyl cellulose, pigments, sand and lime on prehydration properties of the mixes for finishing purpose is not substantial. Significant positive influence comes from the addition of fatty acid salts (zinc stearate or sodium oleate. The dry cement mixes for finishing purpose has been recomended to hydrophobisate with one of these additives, adding about 1 % by weight of cement during preducing mixes. DOI: http://dx.doi.org/10.5755/j01.ms.19.3.5243

  11. Ageing of Dry Cement Mixes for Finishing Purposes

    Directory of Open Access Journals (Sweden)

    Bronius VEKTARIS

    2013-09-01

    Full Text Available Dry building mixes, stored in the air, absorb water vapor and CO2 gas and ageing because properties of binding materials, mostly Portland cement, deteriorate after its prehydration and carbonation. In this paper the ageing singularities of dry cement mixes for finishing purposes and additives for retarding this process has been determinated. Ordinary and quickly hardening Portland cements absorb H2O and CO2 more than white cement – about 70 % – 75 % and 30 % – 38 % per month of innitial mass, respectively. White cement is more resistant to prehydration and carbonation, because it contains less C3A, C4AF and alkali, characterized initial activity. Dry mixes with white cement, although slower, but still worse after stored. Influence of routine dry mortar mixes ingredients and additives (methyl cellulose, pigments, sand and lime on prehydration properties of the mixes for finishing purpose is not substantial. Significant positive influence comes from the addition of fatty acid salts (zinc stearate or sodium oleate. The dry cement mixes for finishing purpose has been recomended to hydrophobisate with one of these additives, adding about 1 % by weight of cement during preducing mixes. DOI: http://dx.doi.org/10.5755/j01.ms.19.3.5243

  12. Finishes and furnishings: considerations for critical care environments.

    Science.gov (United States)

    Chambers, Misty; Bowman, Ken L

    2011-01-01

    When selecting finishes and furnishings within a critical care unit, multiple factors can ultimately affect patient outcomes, impact costs, and contribute to operational efficiencies. First, consider the culture of the regional location, operations of the specific facility, and the recent focus on patient-centered care. The intention is to create an appropriate familiarity and comfort level with the environment for the patient and family. Second, safety and infection control are of utmost concern, particularly for the critical care patient with limited mobility. The planning and design team must be acutely aware of the regulations and guidelines of various governing agencies, local codes, and best design practices that can directly affect choices of finishes and furnishings. Flooring, wall, and window finishes, lighting, art and color, as well as furniture and fabric selection should be considered. Issues to address include maintenance, durability, sustainability, infection control, aesthetics, safety, wayfinding, and acoustics. Balancing these issues with comfort, patient and staff satisfaction, accommodations for an aging population, increasing bariatric needs, efficient operations, and avoidance of "never events" requires team collaboration and communication, knowledge of product advancements, a keen awareness of how environmental stimuli are perceived, and utilization of the best available evidence to make informed design decisions.

  13. Dust control technology usage patterns in the drywall finishing industry.

    Science.gov (United States)

    Young-Corbett, Deborah E; Nussbaum, Maury A

    2009-06-01

    A telephone survey was conducted to quantify drywall finishing industry usage rates of dust control technology, identify barriers to technology adoption, and explore firm owner perception of risk. Industry use of the following technologies was described: wet methods, respiratory protection, pole sanders, ventilated sanders, and low-dust joint compound. A survey instrument composed of both Likert-type scaled items and open-ended items was developed and administered by telephone to the census population of the owners of member firms of trade associations: Finishing Contractors Association and Association of the Wall and Ceiling Industries. Of 857 firms, 264 interviews were completed. Along with descriptive statistics, results were analyzed to examine effects of firm size and union affiliation on responses. Responses to open-ended items were analyzed using content analysis procedures. Firm owners rated the risk of dust to productivity and customer satisfaction as low-moderate. Half rated the dust as having some impact on worker health, with higher impacts indicated by owners of small firms. Among the available control technologies, respiratory protection was used most frequently. Several barriers to implementation of the more effective control technologies were identified. Barriers associated with technology usability, productivity, and cost, as well as misperceptions of risk, should be addressed to improve dust control in the drywall finishing industry.

  14. Productive performance of Holstein calves finished in feedlot or pasture

    Directory of Open Access Journals (Sweden)

    ANA MARIA O. DIAS

    Full Text Available ABSTRACT The use of animals from dairy farms is an alternative to meat production since it provides an increment of total income for farmers. This study aims to evaluate the performance of Holstein calves finished in two feeding systems (feedlot or pasture. Forty-three animals with 58 days old and 57 kg were divided in two treatments: 23 animals finished in feedlot with corn silage plus concentrate based on corn and soybean meal (40:60; 20 animals kept in cultivated pastures according to the period of the year: Italian ryegrass (Lolium multiflorum and pearl millet (Pennisetum americanum with supplementation with the same feedlot-concentrate at 1% body weight. Animals were slaughtered with 200 kg. Dry matter and nutrient intake were determined, with the use of chromium oxide for estimating pasture intake. Feedlot animals had greater total intake and total digestible nutrients, resulting in higher average daily gain (0.949 vs 0.694 kg day-1. Crude protein intake, neutral detergent fiber and feed conversion did not show significant differences. Holstein calves have improved performance when finished in feedlot.

  15. Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry

    Directory of Open Access Journals (Sweden)

    Mikdam Jamal

    2017-12-01

    Full Text Available Metal additive manufacturing (AM is increasingly used to create complex 3D components at near net shape. However, the surface finish (SF of the metal AM part is uneven, with surface roughness being variable over the facets of the design. Standard post-processing methods such as grinding and linishing often meet with major challenges in finishing parts of complex shape. This paper reports on research that demonstrated that mass finishing (MF processes are able to deliver high-quality surface finishes (Ra and Sa on AM-generated parts of a relatively complex geometry (both internal features and external facets under select conditions. Four processes were studied in this work: stream finishing, high-energy (HE centrifuge, drag finishing and disc finishing. Optimisation of the drag finishing process was then studied using a structured design of experiments (DOE. The effects of a range of finishing parameters were evaluated and optimal parameters and conditions were determined. The study established that the proposed method can be successfully applied in drag finishing to optimise the surface roughness in an industrial application and that it is an economical way of obtaining the maximum amount of information in a short period of time with a small number of tests. The study has also provided an important step in helping understand the requirements of MF to deliver AM-generated parts to a target quality finish and cycle time.

  16. Fluoroalkyl Siloxanes as Liquid-Repellent Fabric Finishes. Part 3. The Durability of the Copolymers and Comparisons with Commercially Available Finishes.

    Science.gov (United States)

    1983-09-01

    of-the- art literature review of these finishes was presented. The finish currently in use is Zepel B (E.l. Dupont De Nemours & Co. (Inc.)). This and...short sumary of these tests has been included in ref. 10. PHOSPHAIE RESISTANCE TESI The resistance of treated fabrics to wetting by organo-phosphorus

  17. Polymer micromolds with near optical quality surface finishes

    Science.gov (United States)

    Shiu, Pun-Pang; Knopf, George K.; Nikumb, Suwas

    2012-03-01

    Disposable microfluidic systems are used to avoid sample contamination in a variety of medical and environmental monitoring applications. A contactless hot intrusion (HI) process for fabricating reusable polymer micromolds with near "optical quality" surface finishes is described in this paper. A metallic hot intrusion mask with the desired microchannels and related passive components is first machined using a tightly focused beam from a diode-pumped solid-state (DPSS) laser. The polymer mold master is then created by pressing the 2D metallic mask onto a polymethylmethacrylate (PMMA) substrate. Since it is a contactless fabrication process the resultant 3D micro-reliefs have near optical quality surface finishes. Unfortunately, the desired micro-relief dimensions (height and width) are not easily related to the hot intrusion process parameters of pressure, temperature, and time exposure profile. A finite element model is introduced to assist the manufacturing engineer in predicting the behavior of the PMMA substrate material as it deforms under heat and pressure during micromold manufacture. The FEM model assumes that thermo-plastics like PMMA become "rubber like" when heated to a temperature slightly above the glass transition temperature. By controlling the material temperature and maintaining its malleable state, it is possible to use the stress-strain relationship to predict the profile dimensions of the imprinted microfeature. Examples of curved microchannels fabricated using PMMA mold masters are presented to illustrate the proposed methodology and verify the finite element model. In addition, the non-contact formation of the micro-reliefs simplifies the demolding process and helps to preserve the high quality surface finishes.

  18. THE MOISTURE METER OF THE DOUGH SEMI-FINISHED PRODUCTS

    Directory of Open Access Journals (Sweden)

    Vladimir Kvasnikov

    2011-03-01

    Full Text Available Abstract. In the article a new method and device of measuring of humidity of semi-finished products isoffered from a test which is based on measuring of free falling time of purveyance from a dough in an airenvironment under the action of gravity. The basic factors of external environment, influencing on humidityof purveyances of tests - pressure and temperature, are marked. By a mathematical design the analysis ofinfluencing of atmospheric pressure and temperature is conducted on humidity of purveyances from thedough.Keywords: humidity meters, oscillation transformer, products from a dough, simulation.

  19. Spatiotemporal Built-up Land Density Mapping Using Various Spectral Indices in Landsat-7 ETM+ and Landsat-8 OLI/TIRS (Case Study: Surakarta City)

    Science.gov (United States)

    Risky, Yanuar S.; Aulia, Yogi H.; Widayani, Prima

    2017-12-01

    Spectral indices variations support for rapid and accurate extracting information such as built-up density. However, the exact determination of spectral waves for built-up density extraction is lacking. This study explains and compares the capabilities of 5 variations of spectral indices in spatiotemporal built-up density mapping using Landsat-7 ETM+ and Landsat-8 OLI/TIRS in Surakarta City on 2002 and 2015. The spectral indices variations used are 3 mid-infrared (MIR) based indices such as the Normalized Difference Built-up Index (NDBI), Urban Index (UI) and Built-up and 2 visible based indices such as VrNIR-BI (visible red) and VgNIR-BI (visible green). Linear regression statistics between ground value samples from Google Earth image in 2002 and 2015 and spectral indices for determining built-up land density. Ground value used amounted to 27 samples for model and 7 samples for accuracy test. The classification of built-up density mapping is divided into 9 classes: unclassified, 0-12.5%, 12.5-25%, 25-37.5%, 37.5-50%, 50-62.5%, 62.5-75%, 75-87.5% and 87.5-100 %. Accuracy of built-up land density mapping in 2002 and 2015 using VrNIR-BI (81,823% and 73.235%), VgNIR-BI (78.934% and 69.028%), NDBI (34.870% and 74.365%), UI (43.273% and 64.398%) and Built-up (59.755% and 72.664%). Based all spectral indices, Surakarta City on 2000-2015 has increased of built-up land density. VgNIR-BI has better capabilities for built-up land density mapping on Landsat-7 ETM + and Landsat-8 OLI/TIRS.

  20. Topographic Correction of Landsat TM-5 and Landsat OLI-8 Imagery to Improve the Performance of Forest Classification in the Mountainous Terrain of Northeast Thailand

    Directory of Open Access Journals (Sweden)

    Uday Pimple

    2017-02-01

    Full Text Available The accurate mapping and monitoring of forests is essential for the sustainable management of forest ecosystems. Advancements in the Landsat satellite series have been very useful for various forest mapping applications. However, the topographic shadows of irregular mountains are major obstacles to accurate forest classification. In this paper, we test five topographic correction methods: improved cosine correction, Minnaert, C-correction, Statistical Empirical Correction (SEC and Variable Empirical Coefficient Algorithm (VECA, with multisource digital elevation models (DEM to reduce the topographic relief effect in mountainous terrain produced by the Landsat Thematic Mapper (TM-5 and Operational Land Imager (OLI-8 sensors. The effectiveness of the topographic correction methods are assessed by visual interpretation and the reduction in standard deviation (SD, by means of the coefficient of variation (CV. Results show that the SEC performs best with the Shuttle Radar Topographic Mission (SRTM 30 m × 30 m DEM. The random forest (RF classifier is used for forest classification, and the overall accuracy of forest classification is evaluated to compare the performances of the topographic corrections. Our results show that the C-correction, SEC and VECA corrected imagery were able to improve the forest classification accuracy of Landsat TM-5 from 78.41% to 81.50%, 82.38%, and 81.50%, respectively, and OLI-8 from 81.06% to 81.50%, 82.38%, and 81.94%, respectively. The highest accuracy of forest type classification is obtained with the newly available high-resolution SRTM DEM and SEC method.

  1. Quantitative extraction of the bedrock exposure rate based on unmanned aerial vehicle data and Landsat-8 OLI image in a karst environment

    Science.gov (United States)

    Wang, Hongyan; Li, Qiangzi; Du, Xin; Zhao, Longcai

    2017-12-01

    In the karst regions of southwest China, rocky desertification is one of the most serious problems in land degradation. The bedrock exposure rate is an important index to assess the degree of rocky desertification in karst regions. Because of the inherent merits of macro-scale, frequency, efficiency, and synthesis, remote sensing is a promising method to monitor and assess karst rocky desertification on a large scale. However, actual measurement of the bedrock exposure rate is difficult and existing remote-sensing methods cannot directly be exploited to extract the bedrock exposure rate owing to the high complexity and heterogeneity of karst environments. Therefore, using unmanned aerial vehicle (UAV) and Landsat-8 Operational Land Imager (OLI) data for Xingren County, Guizhou Province, quantitative extraction of the bedrock exposure rate based on multi-scale remote-sensing data was developed. Firstly, we used an object-oriented method to carry out accurate classification of UAVimages. From the results of rock extraction, the bedrock exposure rate was calculated at the 30 m grid scale. Parts of the calculated samples were used as training data; other data were used for model validation. Secondly, in each grid the band reflectivity of Landsat-8 OLI data was extracted and a variety of rock and vegetation indexes (e.g., NDVI and SAVI) were calculated. Finally, a network model was established to extract the bedrock exposure rate. The correlation coefficient of the network model was 0.855, that of the validation model was 0.677 and the root mean square error of the validation model was 0.073. This method is valuable for wide-scale estimation of bedrock exposure rate in karst environments. Using the quantitative inversion model, a distribution map of the bedrock exposure rate in Xingren County was obtained.

  2. Extent and Area of Swidden in Montane Mainland Southeast Asia: Estimation by Multi-Step Thresholds with Landsat-8 OLI Data

    Directory of Open Access Journals (Sweden)

    Peng Li

    2016-01-01

    Full Text Available Information on the distribution, area and extent of swidden agriculture landscape is necessary for implementing the program of Reducing Emissions from Deforestation and Forest Degradation (REDD, biodiversity conservation and local livelihood improvement. To our knowledge, explicit spatial maps and accurate area data on swidden agriculture remain surprisingly lacking. However, this traditional farming practice has been transforming into other profit-driven land use, like tree plantations and permanent cash agriculture. Swidden agriculture is characterized by a rotational and dynamic nature of agroforestry, with land cover changing from natural forests, newly-cleared swiddens to different-aged fallows. The Operational Land Imager (OLI onboard the Landsat-8 satellite has visible, near-infrared and shortwave infrared bands, which are sensitive to the changes in vegetation cover, land surface moisture content and soil exposure, and therefore, four vegetation indices (VIs were calculated, including the Normalized Difference Vegetation Index (NDVI, the Normalized Difference Moisture Index (NDMI, the Normalized Burn Ratio (NBR and the Soil Adjusted Vegetation Index (SAVI. In this study, we developed a multi-step threshold approach that uses a combination of thresholds of four VIs and local elevation range (LER and applied it to detect and map newly-opened swiddens and different-aged fallows using OLI imagery acquired between 2013 and 2015. The resultant Landsat-derived swidden agriculture maps have high accuracy with an overall accuracy of 86.9% and a Kappa coefficient of 0.864. The results of this study indicated that the Landsat-based multi-step threshold algorithms could potentially be applied to monitor the long-term change pattern of swidden agriculture in montane mainland Southeast Asia since the late 1980s and also in other tropical regions, like insular Southeast Asia, South Asia, Latin America and Central Africa, where swidden agriculture is

  3. Dietary starch types affect liver nutrient metabolism of finishing pigs.

    Science.gov (United States)

    Xie, Chen; Li, Yanjiao; Li, Jiaolong; Zhang, Lin; Zhou, Guanghong; Gao, Feng

    2017-09-01

    This study aimed to evaluate the effect of different starch types on liver nutrient metabolism of finishing pigs. In all ninety barrows were randomly allocated to three diets with five replicates of six pigs, containing purified waxy maize starch (WMS), non-waxy maize starch (NMS) and pea starch (PS) (the amylose to amylopectin ratios were 0·07, 0·19 and 0·28, respectively). After 28 d of treatments, two per pen (close to the average body weight of the pen) were weighed individually, slaughtered and liver samples were collected. Compared with the WMS diet, the PS diet decreased the activities of glycogen phosphorylase, phosphoenolpyruvate carboxykinase and the expression of phosphoenolpyruvate carboxykinase 1 in liver (P0·05). Compared with the WMS diet, the PS diet reduced the expressions of glutamate dehydrogenase and carbamoyl phosphate synthetase 1 in liver (Pinsulin receptor, and increased the expressions of mammalian target of rapamycin complex 1 and ribosomal protein S6 kinase β-1 in liver compared with the WMS diet (Pinsulin/PI3K/protein kinase B signalling pathway in liver of finishing pigs.

  4. Establishing Trailer Ventilation (Boarding) Requirements for Finishing Pigs during Transport.

    Science.gov (United States)

    McGlone, John; Sapkota, Avi; Johnson, Anna; Kephart, Rebecca

    2014-08-19

    Specifically, this study aimed to establish the effects on mortality and morbidity of boarding levels (amount of side-wall trailer ventilation) for finishing pigs in mild weather (8.80 ± 0.30 °C, 71.70% ± 1.12% humidity). Pigs from commercial finishing sites were transported in 302 pot-bellied trailers to commercial processing plants. Measures collected at the processing plant were rates of dead on arrival (DOA), non-ambulatory, non-injured (NANI), non-ambulatory, injured (NAI), and total dead and down (D&D). Boarding levels (% that side walls were closed off with inserted boards) were divided into 3 bins: low, medium, and high, and outside temperature was divided into 4 bins 15 °C. Average rates of DOA, NANI, NAI, and D&D were approximately 0.30%, 0.12%, 0.04%, and 0.46%, respectively. The D&D was highest when boarding level was low with temperatures boarding level (medium and high boarding) in the temperature range of 5.10 °C to 23.30 °C did not affect pig losses.

  5. TECHNOLOGY FORMING PRICE DISTRIBUTION OF FINISHED GOODS OF LOGISTICS SYSTEM

    Directory of Open Access Journals (Sweden)

    Novikova T. V.

    2015-12-01

    Full Text Available Modern economics has developed a number of areas of the system for controlling the distribution of finished products. However, in domestic and foreign economic literature the mechanisms of logistics approach are not sufficient to provide higher sales of enterprise-producers, that have sales in remote areas. In this study, first, the importance of company-producers and end-users the methods of rational delivery of finished products is considered, and secondly, the approaches to defining the essence and content of the concept of «distribution» are given, in the third, the logistics processes of the distribution system ready products of a particular company-producer are described, fourthly, the technology of one price product delivery was developed and it was shown the economic efficiency (the possible results of the solution of the problem of distribution logistics of its application in the target company. The study showed that there is an opportunity, based on the development and implementation of technologies to reduce the final price of the goods, to develop the company and increase its competitiveness by minimizing costs and increasing return on investment. The results of research extend the knowledge of methodology of system logistics management in the enterprise.

  6. Deburring and surface finishing: The past ten years and projections for the next ten years

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1990-09-01

    The 1970s were a decade of significant growth in deburring and surface finishing. In the 1980s progress was made in robotic finishing, burr formation models, surface finish measurement, new processes, equipment and tooling. The centers of burr and surface related research changed. The decade of the 1990s will bring greater competition, environmental restrictions, more processes, more automation, and better characterization and simulation of processes.

  7. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    Energy Technology Data Exchange (ETDEWEB)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J. [Pacific Northwest Lab., Richland, WA (United States); Nass, R. [Nuclear Fuel Services, Inc. (United States)

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage.

  8. Radon exhalation from some finishing materials frequently used in Syria

    International Nuclear Information System (INIS)

    Shweikani, R.; Raja, G.

    2009-01-01

    Building materials are one of the main radon sources in dwellings. Therefore, the determination of radon exhalation from these materials will help in prediction the existence of dwelling with potential radon risk. Ceramic tiles and marble samples were collected from Syrian local market. The correlation between radon exhalation from these materials and radium-226 content was studied. Results showed that there is no clear relation between radium content and radon exhalation rate, and the exhalation of radon did not exceed the permissible limits of American Environment Protection Agency (EPA). In addition, the additional annual dose from radon and gamma of the natural radioactivity in ceramic and marble when used as finishing materials in houses was also estimated and found to be not exceeding 20 μSv and 35 μSv from radon and gamma respectively.

  9. Thermal Properties of Anionic Polyurethane Composition for Leather Finishing

    Directory of Open Access Journals (Sweden)

    Olga KOVTUNENKO

    2016-09-01

    Full Text Available Thermal properties of anionic polyurethane composition mixed with collagen product and hydrophilic sodium form of montmorillonite for use in the finishing of leather were studied by thermogravimetric method. The thermal indices of processes of thermal and thermo-oxidative destruction depending on the polyurethane composition were determined. The influence of anionic polyurethane composition on thermal behavior of chromium tanned gelatin films that imitate the leather were studied. APU composition with natural compounds increases their thermal stability both in air and in nitrogen atmosphere due to the formation of additional bonds between active groups of APU, protein and chrome tanning agent as the result of chemical reactions between organic and inorganic parts with the new structure formation.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.10043

  10. Finishing and polishing of a poly (fluoroalkoxyphosphazene) resilient denture liner.

    Science.gov (United States)

    Loney, R W; Moulding, M B; Hacker, C H; Ritsco, R G

    1994-01-01

    A raised ridge of Novus resilient denture liner was removed from samples using one of three burs, three stones, or a coarse sandpaper disc. Samples were polished using pumice alone, tin oxide alone, or both agents. A flat, unfinished sample served as a control. Average surface roughness of control samples was 0.96 microns. Average surface roughness measurements for reduced samples ranged from 7.21 microns (sandpaper disc) to 3.34 microns (Prolastic wheel). Without polishing, sandpaper discs and serrated burs produced rougher surfaces than stones or the nonserrated bur. The sandpaper disc reduced the liner the quickest. There were no significant differences between treatments or controls after the use of pumice alone or after the use of a combination of pumice and tin oxide. An acceptable finishing protocol for this poly(fluoroalkoxyphosphazene) resilient liner appears to differ from that previously established for a silicone resilient denture liner.

  11. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    International Nuclear Information System (INIS)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J.; Nass, R.

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage

  12. Plutonium Finishing Plant Transition Project mission analysis report

    International Nuclear Information System (INIS)

    Courson, D.B.

    1994-01-01

    This report defines the mission for the Plutonium Finishing Plant Transition Project (PFPTP) using a systems engineering approach. This mission analysis will be the basis for the functional analysis which will further define and break down the mission statement into all of the detailed functions required to accomplish the mission. The functional analysis is then used to develop requirements, allocate those requirements to functions, and eventually be used to design the system. This report: presents the problem which will be addressed, defines PFP Transition Project, defines the overall mission statement, describes the existing, initial conditions, defines the desired, final conditions, identifies the mission boundaries and external interfaces, identifies the resources required to carry out the mission, describes the uncertainties and risks, and discusses the measures which will be used to determine success

  13. Research on reducing the edge effect in magnetorheological finishing.

    Science.gov (United States)

    Hu, Hao; Dai, Yifan; Peng, Xiaoqiang; Wang, Jianmin

    2011-03-20

    The edge effect could not be avoided in most optical manufacturing methods based on the theory of computer controlled optical surfacing. The difference between the removal function at the workpiece edge and that inside it is also the primary cause for edge effect in magnetorheological finishing (MRF). The change of physical dimension and removal ratio of the removal function is investigated through experiments. The results demonstrate that the situation is different when MRF "spot" is at the leading edge or at the trailing edge. Two methods for reducing the edge effect are put into practice after analysis of the processing results. One is adopting a small removal function for dealing with the workpiece edge, and the other is utilizing the removal function compensation. The actual processing results show that these two ways are both effective on reducing the edge effect in MRF.

  14. Nutrition behaviors, perceptions, and beliefs of recent marathon finishers.

    Science.gov (United States)

    Wilson, Patrick B

    2016-09-01

    To describe the nutrition behaviors, perceptions, and beliefs of marathoners. A survey-based study was conducted with 422 recent marathon finishers (199 men, 223 women). Participants reported their running background, demographics, diets followed, supplements used, and food/fluid intake during their most recent marathon (median 7 days prior), as well as beliefs about hydration, fueling, and sources of nutrition information. Median finishing times were 3:53 (3:26-4:35) and 4:25 (3:50-4:59) h:min for men and women during their most recent marathon. Most participants (66.1%) reported typically following a moderate-carbohydrate, moderate-fat diet, while 66.4% carbohydrate-loaded prior to their most recent marathon. Among 139 participants following a specific diet over the past year, the most common were vegetarian/vegan/pescatarian (n = 39), Paleolithic (n = 16), gluten-free (n = 15), and low-carbohydrate (n = 12). Roughly 35% of participants took a supplement intended to improve running performance over the past month. Women were more likely to follow specific diets (39.0% vs. 26.1%), while men were more likely to recently use performance-enhancing supplements (40.2% vs. 30.0%). Most participants (68.3%) indicated they were likely or very likely to rely on a structured plan to determine fluid intake, and 75% were confident in their ability to hydrate. At least 35.6% of participants thought they could improve marathon performance by 8% or more with nutrition interventions. Scientific journals ranked as the most reliable source of nutrition information, while running coaches ranked as the most likely source to be utilized. Findings from this investigation, such as diets and supplements utilized by marathoners, can be used by practitioners and researchers alike to improve the dissemination of scientifically-based information on nutrition and marathon running.

  15. Analysis of Failure to Finish a Race in a Cohort of Thoroughbred Racehorses in New Zealand

    Directory of Open Access Journals (Sweden)

    Jasmine Tanner

    2016-05-01

    Full Text Available The objective was to describe the incidence of failure to finish a race in flat-racing Thoroughbreds in New Zealand as these are summary indicators of falls, injuries and poor performance. Retrospective data on six complete flat racing seasons (n = 188,615 race starts of all Thoroughbred flat race starts from 1 August 2005 to 31 July 2011 were obtained. The incidence of failure to finish events and binomial exact 95% confidence intervals were calculated per 1000 horse starts. The association between horse-, rider- and race-level variables with the outcomes failure to finish, pulled-up/fell and lost rider were examined with a mixed effects Poisson regression model. A total of 544 horses failed to finish in 188,615 race starts with an overall incidence of 2.88 per 1000 horse starts (95% CI 2.64–3.12. The incidence of failure to finish horses across each race year showed little variability. In the univariable analysis race distance, larger field size, season, and ratings bands showed association with failing to finish a race. The overall failure to finish outcome was associated with season, race distance and ratings bands (horse experience and success ranking criteria. In the multivariable analysis, race distance and ratings bands were associated with horses that pulled-up/fell; season, apprentice allowances and ratings bands were associated with the outcome lost rider. The failure to finish rate was lower than international figures for race day catastrophic injury. Racing and environmental variables were associated with failure to finish a race highlighting the multifactorial nature of race-day events. Further investigation of risk factors for failure to finish is required to better understand the reasons for a low failure to finish rate in Thoroughbred flat races in New Zealand.

  16. Semi-Automatic Mapping of Tidal Cracks in the Fast Ice Region near Zhongshan Station in East Antarctica Using Landsat-8 OLI Imagery

    Directory of Open Access Journals (Sweden)

    Fengming Hui

    2016-03-01

    Full Text Available Tidal cracks are linear features that appear parallel to coastlines in fast ice regions due to the actions of periodic and non-periodic sea level oscillations. They can influence energy and heat exchange between the ocean, ice, and atmosphere, as well as human activities. In this paper, the LINE module of Geomatics 2015 software was used to automatically extract tidal cracks in fast ice regions near the Chinese Zhongshan Station in East Antarctica from Landsat-8 Operational Land Imager (OLI data with resolutions of 15 m (panchromatic band 8 and 30 m (multispectral bands 1–7. The detected tidal cracks were determined based on matching between the output from the LINE module and manually-interpreted tidal cracks in OLI images. The ratio of the length of detected tidal cracks to the total length of interpreted cracks was used to evaluate the automated detection method. Results show that the vertical direction gradient is a better input to the LINE module than the top-of-atmosphere (TOA reflectance input for estimating the presence of cracks, regardless of the examined resolution. Data with a resolution of 15 m also gives better results in crack detection than data with a resolution of 30 m. The statistics also show that, in the results from the 15-m-resolution data, the ratios in Band 8 performed best with values of the above-mentioned ratio of 50.92 and 31.38 percent using the vertical gradient and the TOA reflectance methods, respectively. On the other hand, in the results from the 30-m-resolution data, the ratios in Band 5 performed best with ratios of 47.43 and 17.8 percent using the same methods, respectively. This implies that Band 8 was better for tidal crack detection than the multispectral fusion data (Bands 1–7, and Band 5 with a resolution of 30 m was best among the multispectral data. The semi-automatic mapping of tidal cracks will improve the safety of vehicles travel in fast ice regimes.

  17. AUTOMATED CLASSIFICATION OF LAND COVER USING LANDSAT 8 OLI SURFACE REFLECTANCE PRODUCT AND SPECTRAL PATTERN ANALYSIS CONCEPT - CASE STUDY IN HANOI, VIETNAM

    Directory of Open Access Journals (Sweden)

    D. Nguyen Dinh

    2016-06-01

    Full Text Available Recently USGS released provisional Landsat 8 Surface Reflectance product, which allows conducting land cover mapping over large composed of number of image scenes without necessity of atmospheric correction. In this study, the authors present a new concept for automated classification of land cover. This concept is based on spectral patterns analysis of reflected bands and can be automated using predefined classification rule set constituted of spectral pattern shape, total reflected radiance index (TRRI and ratios of spectral bands. Given a pixel vector B6 = {b1,b2,b3,b4,b5,b6} where b1, b2,...,b6 denote bands 2, 3, ...,7 of OLI sensor respectively. By using the pixel vector B6 we can construct spectral reflectance curve. Each spectral curve is featured by a shape, which can be described in simplified form of an analogue pattern, which is consisted of 15 digits of 0, 1 and 2 showing mutual relative position of spectral vertices. Value of comparison between band i and j is 2 if bj > bi, 1 if bj = bi and 0 if bj i. Simplified spectral pattern is defined by 15 digits as m1,2m1,3m1,4m1,5m1,6m2,3m2,4m2,5m2,6m3,4m3,5m3,6m4,5m4,6m5,6 where mi,j is result of comparison of reflectance between bi and bj and has values of 0, 1 and 2. After construction of SSP for each pixel in the input image, the original image will be decomposed to component images, which contain pixels with the same SRCS pattern. The decomposition can be written analytically by equation A = Σnk=1Ck where A stands for original image with 6 spectral bands, n is number of component images decomposed from A and Ck is component image. For this study, we use Landsat 8 OLI reflectance image LC81270452013352LGN00 and LC81270452015182LGN00. For the decomposition, we use only six reflective bands. Each land cover class is defined by SSP code, threshold values for TRRI and band ratios. Automated classification of land cover was realized with 8 classes: forest, shrub, grass, water, wetland

  18. Effects of roughage inclusion and particle size on performance and rumination behavior of finishing beef steers

    Science.gov (United States)

    Roughage is mechanically processed to increase digestibility, and handling and mixing characteristics in finishing diets. Roughage is fed to promote rumen health and decrease digestive upset, but inclusion in finishing diets is limited due to the cost per unit of energy. Rumination behavior may be a...

  19. 76 FR 79221 - Penske Logistics, LLC, Customer Service Department General Motors and Tier Finished Goods...

    Science.gov (United States)

    2011-12-21

    ..., Customer Service Department General Motors and Tier Finished Goods/Finished Goods Division; a Subsidiary of... September 1, 2010, applicable to workers of Penske Logistics, LLC, Customer Service Department, a subsidiary... Services and Manpower. The workers are engaged in the supply of customer service. The notice was published...

  20. The Effectiveness of Finishing School Programmes from the Perspectives of Graduates and Employers

    Science.gov (United States)

    Ali, Jamal; Eam, Lim Hock; Ismail, Russayani; Rahim, Fauziah Abdul; Isa, Filzah Md; Ismail, Ismi Arif

    2014-01-01

    Purpose: This study examined the effectiveness of Finishing School programmes in enhancing the employability of graduates from institutions of higher learning. The perceptions of the graduates and employers towards the effectiveness of the programmes were analyzed. The effectiveness of Finishing School programmes evaluated through a graduate…

  1. Relationship of glucocorticoids and hematological measures with feed intake, growth, and efficiency of finishing beef cattle

    Science.gov (United States)

    The objective of this experiment was to determine the association of glucocorticoids and markers for immune status in finishing beef steers and heifers with DMI, growth, and efficiency. Calves (n = 236) were individually fed a finishing ration for 84 d with BW measured every 21 d. Blood samples we...

  2. The effect of pheno-formaldehyde finishing on the properties of ...

    African Journals Online (AJOL)

    This paper examined the effect of catalyst concentration, curing time and temperature on a phenolformaldehyde finished direct dyed cotton. The grey cotton fabric was desized, scoured, bleached and dyed with chlorazol D, a direct dye. Sample of the dyed cotton were subjected to resin finishing using phenol: formaldehyde.

  3. "Miss! I'm Done!" Finishing Craft Assignments as a Situated Activity System in Preschool

    Science.gov (United States)

    Deunk, Marjolein; Berenst, Jan; de Glopper, Kees

    2010-01-01

    We describe the Situated Activity System of finishing craft assignments in preschool: the specific, routinized way that child and teacher jointly close the child's craft assignment, employing a specific discourse pattern. We analyzed the interactions of 14 Dutch children between 2.1 and 3.10 years old while they were finishing their craft…

  4. Effects of time of change from broiler starter to broiler finisher diet on ...

    African Journals Online (AJOL)

    A study was conducted to determine the effect of time of change from broiler starter ration (BSR) to broiler finisher ration (BFR) on growth performance and economy of gain of meat- type chickens. Six hundred Abor Acres broiler chickens were used in an 8-week study in which same starter and finisher diets were fed but at ...

  5. Effect of finishing/polishing techniques and time on surface roughness of esthetic restorative materials

    Directory of Open Access Journals (Sweden)

    Prashanthi Sampath Madhyastha

    2017-01-01

    Conclusion: It might be concluded that: (i Filtek P90 showed least Ra values followed by < Z100 < Dyract < GIC; (ii immediate (24 h finishing/polishing of materials is better than delayed; and (iii among all these polishing systems, diamond bur–Astropol and Astrobrush showed good surface finish.

  6. 40 CFR 427.80 - Applicability; description of the coating or finishing of asbestos textiles subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the coating or finishing of asbestos textiles subcategory. 427.80 Section 427.80 Protection of Environment... SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.80 Applicability; description...

  7. 40 CFR 410.40 - Applicability; description of the woven fabric finishing subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the woven... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Woven Fabric Finishing Subcategory § 410.40 Applicability; description of the woven fabric finishing subcategory. The...

  8. Surface morphology changes of acrylic resins during finishing and polishing phases

    Directory of Open Access Journals (Sweden)

    Glaucio Serra

    2013-12-01

    Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

  9. Mortality on grower/finisher-only swine operations in the United States

    Directory of Open Access Journals (Sweden)

    Losinger W.C.

    1999-01-01

    Full Text Available For 53 grower/finisher-only swine operations that participated in the United States National Animal Health Monitoring System 1995 National Swine Study, mortality among finisher pigs ranged from 0 to 12.0% over a 6-month period. Twenty-six (49.1% had 2% mortality. Nine (17.0% operations experienced >4% mortality. Fisher's exact test revealed that operations with all-in all-out management were significantly more likely to have 1 grower/finisher pig came from another source. Larger operations (where >900 pigs entered the grower/finisher phase practiced all-in, all-out management more frequently than smaller operations, and had a lower mean percent mortality than smaller operations. Diagnosis of Salmonella in finisher pigs performed at a laboratory or by a veterinarian in the 12 months prior to interview was associated with both increased percent mortality and increased percent mortality per day.

  10. Carcass and meat quality of finished and non-finished Limousin heifers from alpine livestock systems differing in altitudinal origin of the forage.

    Science.gov (United States)

    Gangnat, Isabelle D M; Kreuzer, Michael; McCormick, Andrea Clavijo; Leiber, Florian; Berard, Joel

    2016-01-01

    Effects of the alpine origin of the forage and of finishing on carcass and beef quality were quantified by modelling different alpine livestock system alternatives. Thirty-five Limousin heifers, initially weighing 383 ± 45 kg, were fed fresh grass at 400 or 2000 m above sea level, or a 1:1 mixture of alpine grass and lowland grass hay at 2000 m. After 9 weeks, the six heaviest and oldest animals per group were slaughtered. The remaining animals were finished for 8 weeks on a silage-concentrate diet in the lowlands to similar age and body weight as the first slaughtered group. Carcass and meat quality (M. longissimus thoracis) were assessed in various respects. The average daily gains achieved were of about 600 g/d and similar between forage-type groups. Dressing percentage was 53.5% in the alpine and 57.2% in the lowland group. Carcass conformation and fat cover scores did not differ between forage-type groups. The meat from the alpine groups had greater ultimate pH and smaller redness, yellowness and protein contents. Still, these differences were of minor practical relevance. There was no forage-type effect on water-holding capacity and shear force of the meat. The alpine systems enhanced the proportion of α-linolenic acid in intramuscular fat and decreased the levels of some volatile compounds in perirenal fat. Finishing resulted in compensatory growth, especially in the animals previously fed lowland grass. There was a trend for the finished compared with the non-finished groups towards greater carcass fat cover and intramuscular fat content. Additionally, ultimate pH was smaller and cooking loss was greater with than without finishing. Meat colour differences were also observed. Shear force was not affected by finishing. The finished animals had a smaller α-linolenic acid proportion in the intramuscular fat. In conclusion, the forage type had small effects on carcass and meat quality. Finishing did not substantially improve carcass and meat quality. The

  11. Mapping of sugarcane crop area in the Paraná State using Landsat/TM/OLI and IRS/LISS-3 images

    Directory of Open Access Journals (Sweden)

    Clóvis Cechim Junior

    Full Text Available ABSTRACT The knowledge on reliable estimates of areas under sugarcane cultivation is essential for the Brazilian agribusiness, since it helps in the development of public policies, in determining prices by sugar mills to producers and allows establishing the logistics of production disposal. The objective of this work was to develop a methodology for mapping the sugarcane crop area in the state of Paraná, Brazil, using images from the Landsat/TM/OLI and IRS/LISS-3 satellites, for the crop years from 2010/2011 to 2013/2014. The mappings were conducted through the supervised Maximum likelihood classification (Maxver achieving, on average, an overall accuracy of 94.13% and kappa index of 0.82. The correlation with the official data of the IBGE ranged from moderate to strong (0.64 ≤ rs ≤ 0.80 with average agreement (dr of 0.81. There was an increase of 2.73% (18,630 ha in the area with sugarcane in Paraná between 2010/2011 and 2013/2014.

  12. Provenance of the oil in par-fried French fries after finish frying.

    Science.gov (United States)

    Al-Khusaibi, Mohammed; Gordon, Michael H; Lovegrove, Julie A; Niranjan, Keshavan

    2012-01-01

    Frozen par-fried French fries are finish-fried either by using the same type of oil used for par frying, or a different type. The nutritive quality of the final oil contained in the product depends on the relative amounts and the fatty acid (FA) composition of the oils used for par frying and finish frying. With the aim of understanding the provenance of the oil in the final product, par-fried French fries-either purchased ready or prepared in the laboratory-were finish fried in oils different from the ones used for par frying. The moisture content, oil content, and FA compositions of the par-fried and finish-fried products were experimentally determined, and the relative amounts of each of the oils present in the final product were calculated using the FAs as markers and undertaking a mass balance on each component FA. The results demonstrate that 89% to 93% of the total oil in the final product originates from the finish-frying step. The study also shows that a significant proportion of the oil absorbed during par frying is expelled from the product during finish frying. Further, the expulsion of par-frying oil was found to occur in the early stages of the finish-frying step. Experiments involving different combinations of par-frying and finish-frying oils showed that the relative proportions of the 2 oils did not depend on the individual fatty acid profiles. This study concludes that any positive health benefits of using an oil having a favorable FA profile for par frying, can potentially be lost, if the oil used for finish frying has a less favorable composition. This paper estimates the relative amounts of oil in French fries that have been fried in 2 stages-a par-frying step and a finish-frying step-which is commonly practiced in food service establishments as well as homes. The 2 key conclusions are: (1) nearly 90% of the oil content of the final product is the one used for finish frying; that is, a processor may use very good oil for par frying but if the

  13. Ractopamine in diets for finishing pigs of different sexual categories

    Directory of Open Access Journals (Sweden)

    Carlos Enrique da Trindade Barbosa

    2012-05-01

    Full Text Available Performance and carcass and cut yield of finishing pigs of three sexual categories fed diets with different levels of ractopamine were studied. Forty-eight hybrid animals (initial weight of 92.1±2.4 kg were distributed in a completely randomised design in 3 × 2 factorial arrangement (three sexual categories: surgically castrated males, two females and immunologically castrated males - with or without 10 ppm of ractopamine, totalling six treatments and eight repetitions with one animal per experimental plot during 28 days. Ractopamine improved weight gain and feed conversion of all sexual categories. The best results were obtained with immunologically castrated males, which, in turn, had lower carcass yield and backfat thickness in the belly. In the absence of ractopamine, depth and loin eye area were higher in females but no differences in these variables were observed between categories when this additive was used. Ractopamine increased the sirloin yield in all sexual categories. There was no difference in bonus index. Ractopamine improves the performance of pigs of 92 to 125 kg. Immunologically castrated males have the best performance responses to ractopamine, but with losses in carcass yield, loin characteristics and backfat thickness of the belly.

  14. Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics

    Directory of Open Access Journals (Sweden)

    Roberto Carlos Bodart Brandão

    2013-10-01

    Full Text Available OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics and its correlation with the periodontium (pink esthetics. Standards of normality are described both in their real dimensions (dental height and width, and in those effectively perceived by the observer, the virtual dimensions. METHODS: The best scientific evidence was sought in the literature to support the clinical procedures that must guide the professional to obtain maximum esthetic quality on their treatments. Therefore, it is necessary to investigate what the other specialties in Dentistry expect from Orthodontics and, specially, what they have to offer. Clinical cases will be used to illustrate the dental movement that might maximize treatment outcome and to confront the ideal standards with the current state of the art. CONCLUSION: Treatment quality is directly related to the amount of procedures implemented by the orthodontist, associated with concepts and resources from Periodontics and Dental Prosthesis. Microesthetics cannot be seen in isolation, but rather as the key to establish a pleasant smile (miniesthetics in addition to a harmonious face (macroesthetics and a human being with high self-esteem (hyper-esthetics.

  15. Novel finishing concepts within BNFL'S advanced reprocessing programme

    International Nuclear Information System (INIS)

    Hobbs, J.W.; Booth, R.; Lawson, S.; Parkes, P.

    2000-01-01

    New methods of converting actinide nitrate solutions to oxide and fabricating the products from the reprocessing of high burn up and MOX fuels are necessary for the next generation of fuel cycle facilities in order to meet dose criteria and cost reduction targets. Options to support this include never fully separating the plutonium from the uranium and reducing decontamination factors. The product stream from such a reprocessing plant will require a finishing route capable of significant levels of automation and dose minimization. Casting of molten uranyl nitrate into pellets followed by de-nitration under vacuum has been investigated as a novel way of manufacturing oxide fuel pellets. Pellets were successfully cast over a range of temperatures and de-nitrated. Incorporation of uranium oxide into the melt was investigated to increase the density of the cast pellet. It has been demonstrated that it is possible to produce extrudates from powder and molten magnesium nitrate mixtures. Results of a preliminary study of the flow behaviour during extrusion of magnesium nitrate simulant loaded with alumina powder are also discussed. (authors)

  16. Evaluation of different finish line designs in base metal alloys

    Directory of Open Access Journals (Sweden)

    Aghandeh R

    1999-06-01

    Full Text Available This investigation was performed according to the widespread application of base metal alloys"nand few articles published about the marginal integrity of restorations fabricated by these metals."nThree standard dies of a maxillary first premolar were prepared with a flat shoulder finish line in buccal"naspect and chamfer in palatal. One of them left with no change. On the buccal aspect of the second and"nthird dies 135?and 1607 bevel were added respectively"nUsing dual wax technique, nine wax patterns were formed on each die and casting procedure of selected"nnon precious alloy was performed by centrifugal method. Marginal gaps of each copping seated on dies"nwere measured by scanning electron microscope (SEM with X500 magnification. Measurements were"ndone on three areas of marked dies on buccal aspect. Measurement son palatal aspect was done on"nmarked midpalatal point as control."nResults and statistical analysis showed no significant difference among marginal gaps in lingual aspect."nBut on the buccal aspect there were statistically significant differences among the groups (P<0.001. Flat"nshoulder had the best marginal integrity (mean 4 micron. Shoulder with 160' bevel had the most marginal"ngap (mean 26.5 micron and shoulder with 1357 bevel was between two other groups (mean 15.7 micron.

  17. Classification and storage of wastewater from floor finish removal operations

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, Charles E. [Univ. of San Francisco, CA (United States)

    1996-05-01

    This study evaluates the wastewater generated from hard surface floor finish removal operations at Lawrence Livermore Laboratory in order to determine if this wastewater is a hazardous waste, either by statistical evaluation, or other measurable regulatory guidelines established in California Regulations. This research also comparatively evaluates the 55 gallon drum and other portable tanks, all less than 1,000 gallons in size in order to determine which is most effective for the management of this waste stream at Lawrence Livermore Laboratory. The statistical methods in SW-846 were found to be scientifically questionable in their application to hazardous waste determination. In this statistical evaluation, the different data transformations discussed in the regulatory guidance document were applied along with the log transformation to the population of 18 samples from 55 gallon drums. Although this statistical evaluation proved awkward in its application, once the data is collected and organized on a spreadsheet this statistical analysis can be an effective tool which can aid the environmental manager in the hazardous waste classification process.

  18. Microencapsulated citronella oil for mosquito repellent finishing of cotton textiles.

    Science.gov (United States)

    Specos, M M Miró; García, J J; Tornesello, J; Marino, P; Vecchia, M Della; Tesoriero, M V Defain; Hermida, L G

    2010-10-01

    Microcapsules containing citronella essential oil were prepared by complex coacervation and applied to cotton textiles in order to study the repellent efficacy of the obtained fabrics. Citronella released from treated textiles was indirectly monitored by the extractable content of its main components. Repellent activity was assessed by exposure of a human hand and arm covered with the treated textiles to Aedes aegypti mosquitoes. Fabrics treated with microencapsulated citronella presented a higher and longer lasting protection from insects compared to fabrics sprayed with an ethanol solution of the essential oil, assuring a repellent effect higher than 90% for three weeks. Complex coacervation is a simple, low cost, scalable and reproducible method of obtaining encapsulated essential oils for textile application. Repellent textiles were achieved by padding cotton fabrics with microcapsules slurries using a conventional pad-dry method. This methodology requires no additional investment for textile finishing industries, which is a desirable factor in developing countries. Copyright © 2010 Royal Society of Tropical Medicine and Hygiene.

  19. Factors influencing dust exposure: finishing activities in drywall construction.

    Science.gov (United States)

    Simmons, Catherine E; Jones, Rachael M; Boelter, Fred W

    2011-05-01

    Sanding drywall joint compound is a dusty construction activity. We studied potential factors influencing exposure to respirable and total dust for sanders and bystanders in the area of drywall joint compound finishing in 17 test events within a room-scale isolation chamber. We found the air change rate to be negatively correlated with dust C(twa) both in the sander's personal breathing zone and surrounding area. We could not conclude that sanding tool type systematically influences dust C(twa), but the use of 80-grit abrasive was associated with the highest dust C(twa). We found respirable dusts were uniformly dispersed 1-8.2 m from sanding activities at a fixed location. As anticipated, both respirable and total dust C(twa) in the sander's personal breathing zone are higher than in the surrounding area. The respirable fraction of the total dust mass C(twa) was greater in the surrounding area than in the sander's personal breathing zone. Respirable dust concentrations measured in real time increased over the duration of sanding, exhibiting a temporal trend that is similar to that predicted by the well-mixed box model with contaminant removal by mechanical ventilation only, and continuous emission. Dust concentrations returned to pre-activity (background) levels 2-4 hr after cessation of the sanding activity.

  20. Fire hazard analysis for Plutonium Finishing Plant complex

    Energy Technology Data Exchange (ETDEWEB)

    MCKINNIS, D.L.

    1999-02-23

    A fire hazards analysis (FHA) was performed for the Plutonium Finishing Plant (PFP) Complex at the Department of Energy (DOE) Hanford site. The scope of the FHA focuses on the nuclear facilities/structures in the Complex. The analysis was conducted in accordance with RLID 5480.7, [DOE Directive RLID 5480.7, 1/17/94] and DOE Order 5480.7A, ''Fire Protection'' [DOE Order 5480.7A, 2/17/93] and addresses each of the sixteen principle elements outlined in paragraph 9.a(3) of the Order. The elements are addressed in terms of the fire protection objectives stated in paragraph 4 of DOE 5480.7A. In addition, the FHA also complies with WHC-CM-4-41, Fire Protection Program Manual, Section 3.4 [1994] and WHC-SD-GN-FHA-30001, Rev. 0 [WHC, 1994]. Objectives of the FHA are to determine: (1) the fire hazards that expose the PFP facilities, or that are inherent in the building operations, (2) the adequacy of the fire safety features currently located in the PFP Complex, and (3) the degree of compliance of the facility with specific fire safety provisions in DOE orders, related engineering codes, and standards.

  1. Maintenance implementation plan for the Plutonium Finishing Plant. Revision 3

    International Nuclear Information System (INIS)

    Meldrom, C.A.

    1996-03-01

    This document outlines the Maintenance Implementation Plan (MIP) for the Plutonium Finishing Plant (PFP) located at the Hanford site at Richland, Washington. This MIP describes the PFP maintenance program relative to DOE order 4330.4B. The MIP defines the key actions needed to meet the guidelines of the Order to produce a cost-effective and efficient maintenance program. A previous report identified the presence of significant quantities of Pu-bearing materials within PFP that pose risks to workers. PFP's current mission is to develop, install and operate processes which will mitigate these risks. The PFP Maintenance strategy is to equip the facility with systems and equipment able to sustain scheduled PFP operations. The current operating run is scheduled to last seven years. Activities following the stabilization operation will involve an Environmental Impact Statement (EIS) to determine future plant activities. This strategy includes long-term maintenance of the facility for safe occupancy and material storage. The PFP maintenance staff used the graded approach to dictate the priorities of the improvement and upgrade actions identified in Chapter 2 of this document. The MIP documents PFP compliance to the DOE 4330.4B Order. Chapter 2 of the MIP follows the format of the Order in addressing the eighteen elements. As this revision is a total rewrite, no sidebars are included to highlight changes

  2. Fire hazard analysis for Plutonium Finishing Plant complex

    International Nuclear Information System (INIS)

    MCKINNIS, D.L.

    1999-01-01

    A fire hazards analysis (FHA) was performed for the Plutonium Finishing Plant (PFP) Complex at the Department of Energy (DOE) Hanford site. The scope of the FHA focuses on the nuclear facilities/structures in the Complex. The analysis was conducted in accordance with RLID 5480.7, [DOE Directive RLID 5480.7, 1/17/94] and DOE Order 5480.7A, ''Fire Protection'' [DOE Order 5480.7A, 2/17/93] and addresses each of the sixteen principle elements outlined in paragraph 9.a(3) of the Order. The elements are addressed in terms of the fire protection objectives stated in paragraph 4 of DOE 5480.7A. In addition, the FHA also complies with WHC-CM-4-41, Fire Protection Program Manual, Section 3.4 [1994] and WHC-SD-GN-FHA-30001, Rev. 0 [WHC, 1994]. Objectives of the FHA are to determine: (1) the fire hazards that expose the PFP facilities, or that are inherent in the building operations, (2) the adequacy of the fire safety features currently located in the PFP Complex, and (3) the degree of compliance of the facility with specific fire safety provisions in DOE orders, related engineering codes, and standards

  3. Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651.

    Science.gov (United States)

    Jomaa, Walid; Songmene, Victor; Bocher, Philippe

    2014-02-28

    The surface finish was extensively studied in usual machining processes (turning, milling, and drilling). For these processes, the surface finish is strongly influenced by the cutting feed and the tool nose radius. However, a basic understanding of tool/surface finish interaction and residual stress generation has been lacking. This paper aims to investigate the surface finish and residual stresses under the orthogonal cutting since it can provide this information by avoiding the effect of the tool nose radius. The orthogonal machining of AA7075-T651 alloy through a series of cutting experiments was performed under dry conditions. Surface finish was studied using height and amplitude distribution roughness parameters. SEM and EDS were used to analyze surface damage and built-up edge (BUE) formation. An analysis of the surface topography showed that the surface roughness was sensitive to changes in cutting parameters. It was found that the formation of BUE and the interaction between the tool edge and the iron-rich intermetallic particles play a determinant role in controlling the surface finish during dry orthogonal machining of the AA7075-T651 alloy. Hoop stress was predominantly compressive on the surface and tended to be tensile with increased cutting speed. The reverse occurred for the surface axial stress. The smaller the cutting feed, the greater is the effect of cutting speed on both axial and hoop stresses. By controlling the cutting speed and feed, it is possible to generate a benchmark residual stress state and good surface finish using dry machining.

  4. Effects of Wet and Dry Finishing and Polishing on Surface Roughness and Microhardness of Composite Resins

    Directory of Open Access Journals (Sweden)

    Negin Nasoohi

    2017-08-01

    Full Text Available Objectives: This study aimed to assess the effect of wet and dry finishing and polishing on microhardness and roughness of microhybrid and nanohybrid composites.Materials and Methods: Thirty samples were fabricated of each of the Polofil Supra and Aelite Aesthetic All-Purpose Body microhybrid and Grandio and Aelite Aesthetic Enamel nanohybrid composite resins. Each group (n=30 was divided into three subgroups of D, W and C (n=10. Finishing and polishing were performed dry in group D and under water coolant in group W. Group C served as the control group and did not receive finishing and polishing. Surface roughness of samples was measured by a profilometer and their hardness was measured by a Vickers hardness tester. Data were analyzed using two-way ANOVA (P<0.05.Results: The smoothest surfaces with the lowest microhardness were obtained under Mylar strip without finishing/polishing for all composites (P<0.0001. The highest surface roughness was recorded for dry finishing/polishing for all composites (P<0.0001. Dry finishing/polishing increased the microhardness of all composites (P<0.0001.Conclusions: Dry finishing and polishing increases the microhardness and surface roughness of microhybrid and nanohybrid composite resins. Keywords: Composite Resins; Dental Polishing; Hardness

  5. Effect of carbon nano tube (CNT) particles in magnetic abrasive finishing of Mg alloy bars

    Energy Technology Data Exchange (ETDEWEB)

    Heng, Lida; Wang, Rui; Kim, Min Soo; Mun, Sang Don; Yang, Gyun Eui [Chonbuk National University, Jeonju (Korea, Republic of)

    2015-11-15

    The Magnetic abrasive finishing (MAF) process is a surface finishing technique in which a magnetic field is used to control abrasive particles during surface finishing of a material. Because smooth surfaces are required for general use, the magnetic abrasive finishing process was developed for finishing surfaces. We studied the effect of CNT particles on the surface roughness of a workpiece. Magnesium alloy bars were used as the cylindrical workpiece and were finished using an MAF process at high workpiece revolution speeds of 1000, 5000, 10000 and 25000 rpm; diamond pastes with diameters of 0.5, 1, and 3 μ were used for comparison. The best value for surface roughness was equivalent to treatment at 0.02 μ m when 0.01 g of CNT particles was mixed together with the unbonded magnetic abrasive at 25000 rpm for 20 seconds. CNT particles were applied to the finishing process to improve the surface roughness of the material, because they have many advantageous properties such as very high strength, light weight, elasticity, and high thermal and air stability. CNT particles are particularly effective for the improvement of Mg alloy bar surface roughness in the MAF process.

  6. Design and Feasibility Testing of the truth FinishIt Tobacco Countermarketing Brand Equity Scale.

    Science.gov (United States)

    Evans, W Douglas; Rath, Jessica; Pitzer, Lindsay; Hair, Elizabeth C; Snider, Jeremy; Cantrell, Jennifer; Vallone, Donna

    2016-07-01

    The original truth campaign was a branded, national smoking prevention mass media effort focused on at-risk youth ages 12-17. Today the truth brand focuses on the goal of finishing tobacco (truth FinishIt). There have been significant changes in the tobacco control landscape, leading FinishIt to focus on 15- to 21-year-olds. The present article reports on formative research and media monitoring data collected to pilot test a new truth FinishIt brand equity scale. The goals of this study were to (a) content analyze truth FinishIt mass media ads, (b) assess truth's social media and followers' perceptions of truth's digital brand identity, and (c) develop and feasibility test a new version of the truth FinishIt brand equity scale using data from an existing Truth Initiative media monitoring study. Through factor analysis, we identified a brand equity scale, as in previous research, consisting of 4 main constructs: brand loyalty, leadership/satisfaction, personality, and awareness. Targeted truth attitudes and beliefs about social perceptions, acceptability, and industry-related beliefs were regressed on the higher order factor and each of the 4 individual brand equity factors. Ordinary least squares regression models generally showed associations in the expected directions (positive for anti-tobacco and negative for pro-tobacco) between targeted attitudes/beliefs and truth FinishIt brand equity. This study succeeded in developing and validating a new truth FinishIt brand equity scale. The scale may be a valuable metric for future campaign evaluation. Future studies should examine the effects of truth FinishIt brand equity on tobacco use behavioral outcomes over time.

  7. Efficacy of 2 finishing protocols in the quality of orthodontic treatment outcome.

    Science.gov (United States)

    Stock, Gregory J; McNamara, James A; Baccetti, Tiziano

    2011-11-01

    The objectives of this prospective clinical study were to evaluate the quality of treatment outcomes achieved with a complex orthodontic finishing protocol involving serpentine wires and a tooth positioner, and to compare it with the outcomes of a standard finishing protocol involving archwire bends used to detail the occlusion near the end of active treatment. The complex finishing protocol sample consisted of 34 consecutively treated patients; 1 week before debonding, their molar bands were removed, and serpentine wires were placed; this was followed by active wear of a tooth positioner for up to 1 month after debonding. The standard finishing protocol group consisted of 34 patients; their dental arches were detailed with archwire bends and vertical elastics. The objective grading system of the American Board of Orthodontics was used to quantify the quality of the finish at each time point. The Wilcoxon signed rank test was used to compare changes in the complex finishing protocol; the Mann-Whitney U test was used to compare changes between groups. The complex finishing protocol group experienced a clinically significant improvement in objective grading system scores after treatment with the positioner. Mild improvement in posterior space closure was noted after molar band removal, but no improvement in the occlusion was observed after placement of the serpentine wires. Patients managed with the complex finishing protocol also had a lower objective grading system score (14.7) at the end of active treatment than did patients undergoing the standard finishing protocol (23.0). Tooth positioners caused a clinically significant improvement in interocclusal contacts, interproximal contacts, and net objective grading system score; mild improvement in posterior band space was noted after molar band removal 1 week before debond. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  8. SURFACE FINISH WHEN THREADING TITANIUM-BASED ALLOY UNDER DRY MACHINING

    Directory of Open Access Journals (Sweden)

    Siti Hartini Hamdan

    2014-12-01

    Full Text Available This paper discusses the quality of surface finish when threading titanium-based alloy under dry condition. The quality of surface finish was studied at various cutting parameters and at the two extreme stages of the machining process, i.e. at the beginning and end of the process. The objective is to evaluate the effect of a worn-out tool on the quality of surface finish. PVD-coated carbide tools were used in this study. Experiments were conducted at two cutting speeds, 35 and 55 m/min, two depths of cut, 0.2 and 0.25 mm, and a constant pitch of 2.0 mm. The tool wear and the quality of surface finish were inspected visually by microscope. The tool’s flank wear was measured gradually and machining was stopped when the flank wear reached the rejection criterion of0.3 mm. The microstructure beneath the machined surface was also evaluated. It was found that, at the beginning of machining, there was only a feed mark on the surface finish. When the machining was prolonged until the tools reached the rejection criterion, a bad surface finish was produced. Metal debris, surface cavities and a boundary crack were observed. Results show that machining with a worn-out tool can cause microstructure alteration beneath the machined surface. The selection of cutting parameters and monitoring of tool wear are crucial in order to obtain a good surface finish. Characterization of the surface finish with respect to the threading process under a dry condition would ultimately help in the development of suitable parameters for machining titanium-based alloys. Surface finish, microstructure, dry machining

  9. 40 CFR 425.10 - Applicability; description of the hair pulp, chrome tan, retan-wet finishing subcategory.

    Science.gov (United States)

    2010-07-01

    ... pulp, chrome tan, retan-wet finishing subcategory. 425.10 Section 425.10 Protection of Environment... POINT SOURCE CATEGORY Hair Pulp, Chrome Tan, Retan-Wet Finish Subcategory § 425.10 Applicability; description of the hair pulp, chrome tan, retan-wet finishing subcategory. The provisions of this subpart are...

  10. 40 CFR 425.20 - Applicability; description of the hair save, chrome tan, retan-wet finish subcategory.

    Science.gov (United States)

    2010-07-01

    ... save, chrome tan, retan-wet finish subcategory. 425.20 Section 425.20 Protection of Environment... POINT SOURCE CATEGORY Hair Save, Chrome Tan, Retan-Wet Finish Subcategory § 425.20 Applicability; description of the hair save, chrome tan, retan-wet finish subcategory. The provisions of this subpart are...

  11. Wavelet theory and belt finishing process, influence of wavelet shape on the surface roughness parameter values

    International Nuclear Information System (INIS)

    Khawaja, Z; Mazeran, P-E; Bigerelle, M; Guillemot, G; Mansori, M El

    2011-01-01

    This article presents a multi-scale theory based on wavelet decomposition to characterize the evolution of roughness in relation with a finishing process or an observed surface property. To verify this approach in production conditions, analyses were developed for the finishing process of the hardened steel by abrasive belts. These conditions are described by seven parameters considered in the Tagushi experimental design. The main objective of this work is to identify the most relevant roughness parameter and characteristic length allowing to assess the influence of finishing process, and to test the relevance of the measurement scale. Results show that wavelet approach allows finding this scale.

  12. Mathematical model for the strip temperature evolution on a continuous finishing hot mill

    International Nuclear Information System (INIS)

    Camurri, C.

    2003-01-01

    The goal of this work is to construct a mathematical model to describe the strip temperature evolution at a continuous finishing hot rolling mill. the model predicts in a satisfactory way the strip temperature, with a finishing one (exit of stand 6) with a deviation of + 6,5 degree centigrade for a mean temperature drop of 150 degree centigrade at the continuous finishing hot mill and a mean error of 4.3 %. It also predicts a coiler temperature with a difference of + 9,2 degree centigrade a mean temperature drop of 240 degree centigrade in the cooling table and a mean error of 3.8%. (Author) 16 refs

  13. The effects of lubrication on the temperature rise and surface finish of amalgam and composite resin.

    Science.gov (United States)

    Jones, C S; Billington, R W; Pearson, G J

    2007-01-01

    It was thought that when finishing and polishing direct filling materials lubrication would affect the surface roughness and temperature rise in samples of amalgam and composite. Previous work by the authors has shown that there is an optimum load, speed and time that produced the smoothest surface when finishing amalgam and composite resin using each of four grades of a disc system. This work was undertaken to examine the effects on temperature rise in samples of amalgam and composite resin of finishing dry compared to finishing with different lubricants. The experiments all used these optimum loads, speeds and times. It also compares the surface finish produced using different lubricants. A high copper amalgam and a hybrid composite resin were finished using the four grades of abrasive discs. Samples produced were 25 mm long by 6 mm wide by 2 mm deep. A thermocouple was inserted 1 mm into the base of the samples. The thermocouple was connected via an electronic thermometer to a computer that permitted the display and recording of temperature against time. After roughening, the samples were finished and polished in a specially constructed jig that mimicked oral finishing. The pre-determined optimum loads, speeds and times were used sequentially for each of the four grades of disc. Five samples were tested for each method of finishing. Firstly, run dry, then in turn lubricated with water, walnut oil and petroleum jelly. After the use of each abrasive disc the surface roughness was measured. One of the five samples was selected at random and prepared for examination in the scanning electron microscope. All results were subjected to non-parametric statistically analyses. With both materials the temperature rise was greatest when run dry, followed by petroleum jelly, walnut oil and the least was when lubricated with water. With these two materials the surface roughness correlates negatively with the temperature rise. The smoothest surface being achieved when finished

  14. Interaction of dispersed polyvynil acetate with silicate in finishing materials

    Directory of Open Access Journals (Sweden)

    Runova, R. F.

    1996-12-01

    Full Text Available This article focuses on the processes of interaction between calcium silicate hydrates and dispersed polyvinyl acetate in tight films with the aim of developing compounds meant for restoration and finishing works. The basis of this development relies on the concept concerning the determining role of the crystal-chemical factor of the silicate phase in the formation of organic-mineral compounds of increased durability. The characteristics of dispersed calcium silicate hydrates are portrayed. The preparation conditions, accounting for the synthesis of the product of submicrocrystalline structure, conforming with the stoichiometry CaO∙SiO2 =0.8-2.0 have been determined. The interaction has been studied for compounds achieved by mixing ingredients in a rapid whirling mixer, and subjected to hardening at T=20+2 T. With the aid of XRD, DTA and Infra-Red Spectrometry methods the formation process of the sophisticated polymer silicate phase in the material was observed for a period of 90 days. The properties of the film were investigated and its high resistance against the influence of external factors was established. On this basis a conclusion concerning the quite high effectiveness of substituting portland cement with dispersed calcium silicate hydrate in polymer cement compounds has been made. White colour and other various special properties determine the suitability for repair and finishing works on facades of buildings.

    Este artículo está orientado a estudiar los procesos de interacción entre los silicatos cálcicos hidratados y el acetato de polivinilo disperso en capas impermeables, con el objeto de desarrollar compuestos destinados para la restauración. El fundamento de estos estudios es determinar el papel que los factores cristaloquímicos de las fases silicato tienen en la formación de compuestos órganominerales de elevada durabilidad. Se han descrito las características de los silicatos cálcicos hidratados

  15. ANALYSIS OF RELATIONSHIP BETWEEN URBAN HEAT ISLAND EFFECT AND LAND USE/COVER TYPE USING LANDSAT 7 ETM+ AND LANDSAT 8 OLI IMAGES

    Directory of Open Access Journals (Sweden)

    N. Aslan

    2016-06-01

    Full Text Available The main objectives of this study are (i to calculate Land Surface Temperature (LST from Landsat imageries, (ii to determine the UHI effects from Landsat 7 ETM+ (June 5, 2001 and Landsat 8 OLI (June 17, 2014 imageries, (iii to examine the relationship between LST and different Land Use/Land Cover (LU/LC types for the years 2001 and 2014. The study is implemented in the central districts of Antalya. Initially, the brightness temperatures are retrieved and the LST values are calculated from Landsat thermal images. Then, the LU/LC maps are created from Landsat pan-sharpened images using Random Forest (RF classifier. Normalized Difference Vegetation Index (NDVI image, ASTER Global Digital Elevation Model (GDEM and DMSP_OLS nighttime lights data are used as auxiliary data during the classification procedure. Finally, UHI effect is determined and the LST values are compared with LU/LC classes. The overall accuracies of RF classification results were computed higher than 88 % for both Landsat images. During 13-year time interval, it was observed that the urban and industrial areas were increased significantly. Maximum LST values were detected for dry agriculture, urban, and bareland classes, while minimum LST values were detected for vegetation and irrigated agriculture classes. The UHI effect was computed as 5.6 °C for 2001 and 6.8 °C for 2014. The validity of the study results were assessed using MODIS/Terra LST and Emissivity data and it was found that there are high correlation between Landsat LST and MODIS LST data (r2 = 0.7 and r2 = 0.9 for 2001 and 2014, respectively.

  16. Automatic Sub-Pixel Co-Registration of LandSat-8 OLI and Sentinel-2A MSI Images Using Phase Correlation and Machine Learning Based Mapping

    Science.gov (United States)

    Skakun, Sergii; Roger, Jean-Claude; Vermote, Eric F.; Masek, Jeffrey G.; Justice, Christopher O.

    2017-01-01

    This study investigates misregistration issues between Landsat-8/OLI and Sentinel-2A/MSI at 30 m resolution, and between multi-temporal Sentinel-2A images at 10 m resolution using a phase correlation approach and multiple transformation functions. Co-registration of 45 Landsat-8 to Sentinel-2A pairs and 37 Sentinel-2A to Sentinel-2A pairs were analyzed. Phase correlation proved to be a robust approach that allowed us to identify hundreds and thousands of control points on images acquired more than 100 days apart. Overall, misregistration of up to 1.6 pixels at 30 m resolution between Landsat-8 and Sentinel-2A images, and 1.2 pixels and 2.8 pixels at 10 m resolution between multi-temporal Sentinel-2A images from the same and different orbits, respectively, were observed. The non-linear Random Forest regression used for constructing the mapping function showed best results in terms of root mean square error (RMSE), yielding an average RMSE error of 0.07+/-0.02 pixels at 30 m resolution, and 0.09+/-0.05 and 0.15+/-0.06 pixels at 10 m resolution for the same and adjacent Sentinel-2A orbits, respectively, for multiple tiles and multiple conditions. A simpler 1st order polynomial function (affine transformation) yielded RMSE of 0.08+/-0.02 pixels at 30 m resolution and 0.12+/-0.06 (same Sentinel-2A orbits) and 0.20+/-0.09 (adjacent orbits) pixels at 10 m resolution.

  17. Object-based Forest Fire Analysis for Pedrógão Grande Fire Using Landsat 8 OLI and Sentinel-2A Imagery

    Science.gov (United States)

    Tonbul, H.; Kavzoglu, T.

    2017-12-01

    Forest fires are among the most important natural disasters with the damage to the natural habitat and human-life. Mapping damaged forest fires is crucial for assessing ecological effects caused by fire, monitoring land cover changes and modeling atmospheric and climatic effects of fire. In this context, satellite data provides a great advantage to users by providing a rapid process of detecting burning areas and determining the severity of fire damage. Especially, Mediterranean ecosystems countries sets the suitable conditions for the forest fires. In this study, the determination of burnt areas of forest fire in Pedrógão Grande region of Portugal occurred in June 2017 was carried out using Landsat 8 OLI and Sentinel-2A satellite images. The Pedrógão Grande fire was one of the largest fires in Portugal, more than 60 people was killed and thousands of hectares were ravaged. In this study, four pairs of pre-fire and post-fire top of atmosphere (TOA) and atmospherically corrected images were utilized. The red and near infrared (NIR) spectral bands of pre-fire and post-fire images were stacked and multiresolution segmentation algorithm was applied. In the segmentation processes, the image objects were generated with estimated optimum homogeneity criteria. Using eCognition software, rule sets have been created to distinguish unburned areas from burned areas. In constructing the rule sets, NDVI threshold values were determined pre- and post-fire and areas where vegetation loss was detected using the NDVI difference image. The results showed that both satellite images yielded successful results for burned area discrimination with a very high degree of consistency in terms of spatial overlap and total burned area (over 93%). Object based image analysis (OBIA) was found highly effective in delineation of burnt areas.

  18. The regulated expression, intracellular trafficking, and membrane recycling of the P2Y-like receptor GPR17 in Oli-neu oligodendroglial cells.

    Science.gov (United States)

    Fratangeli, Alessandra; Parmigiani, Elena; Fumagalli, Marta; Lecca, Davide; Benfante, Roberta; Passafaro, Maria; Buffo, Annalisa; Abbracchio, Maria P; Rosa, Patrizia

    2013-02-15

    GPR17 is a G-protein-coupled receptor that is activated by two classes of molecules: uracil-nucleotides and cysteinyl-leukotrienes. GPR17 is required for initiating the differentiation of oligodendrocyte precursors but has to be down-regulated to allow cells to undergo terminal maturation. Although a great deal has been learned about GPR17 expression and signaling, no information is currently available about the trafficking of native receptors after the exposure of differentiating oligodendrocytes to endogenous agonists. Here, we demonstrate that neuron-conditioned medium induces the transcriptionally mediated, time-regulated expression of GPR17 in Oli-neu, an oligodendrocyte precursor cell line, making these cells suitable for studying the endocytic traffic of the native receptor. Agonist-induced internalization, intracellular trafficking, and membrane recycling of GPR17 were analyzed by biochemical and immunofluorescence assays using an ad hoc-developed antibody against the extracellular N-terminal of GPR17. Both UDP-glucose and LTD(4) increased GPR17 internalization, although with different efficiency. At early time points, internalized GPR17 co-localized with transferrin receptor, whereas at later times it partially co-localized with the lysosomal marker Lamp1, suggesting that a portion of GPR17 is targeted to lysosomes upon ligand binding. An analysis of receptor recycling and degradation demonstrated that a significant aliquot of GPR17 is recycled to the cell surface. Furthermore, internalized GPR17 displayed a co-localization with the marker of the "short loop" recycling endosomes, Rab4, while showing very minor co-localization with the "long loop" recycling marker, Rab11. Our results provide the first data on the agonist-induced trafficking of native GPR17 in oligodendroglial cells and may have implications for both physiological and pathological myelination.

  19. Analysis of Relationship Between Urban Heat Island Effect and Land Use/cover Type Using Landsat 7 ETM+ and Landsat 8 Oli Images

    Science.gov (United States)

    Aslan, N.; Koc-San, D.

    2016-06-01

    The main objectives of this study are (i) to calculate Land Surface Temperature (LST) from Landsat imageries, (ii) to determine the UHI effects from Landsat 7 ETM+ (June 5, 2001) and Landsat 8 OLI (June 17, 2014) imageries, (iii) to examine the relationship between LST and different Land Use/Land Cover (LU/LC) types for the years 2001 and 2014. The study is implemented in the central districts of Antalya. Initially, the brightness temperatures are retrieved and the LST values are calculated from Landsat thermal images. Then, the LU/LC maps are created from Landsat pan-sharpened images using Random Forest (RF) classifier. Normalized Difference Vegetation Index (NDVI) image, ASTER Global Digital Elevation Model (GDEM) and DMSP_OLS nighttime lights data are used as auxiliary data during the classification procedure. Finally, UHI effect is determined and the LST values are compared with LU/LC classes. The overall accuracies of RF classification results were computed higher than 88 % for both Landsat images. During 13-year time interval, it was observed that the urban and industrial areas were increased significantly. Maximum LST values were detected for dry agriculture, urban, and bareland classes, while minimum LST values were detected for vegetation and irrigated agriculture classes. The UHI effect was computed as 5.6 °C for 2001 and 6.8 °C for 2014. The validity of the study results were assessed using MODIS/Terra LST and Emissivity data and it was found that there are high correlation between Landsat LST and MODIS LST data (r2 = 0.7 and r2 = 0.9 for 2001 and 2014, respectively).

  20. Nii, nagu oli, seal, kus oli / Heili Sibrits

    Index Scriptorium Estoniae

    Sibrits, Heili, 1977-

    2010-01-01

    Arvustus: Goodwin, Jason. Janitšaride puu : [romaan] / inglise keelest tõlkinud Juhan Habicht. Tallinn : Varrak, 2006 ; Goodwin, Jason. Maokivi : [kriminaalromaan] / inglise keelest tõlkinud Juhan Habicht. Tallinn : Varrak, 2008 ; Goodwin, Jason. Bellini kaart / inglise keelest tõlkinud Juhan Habicht. Tallinn : Varrak, 2010

  1. Fiber Finishes for Improving Galvanic Resistance of Imide-Based Composites

    National Research Council Canada - National Science Library

    Allred, R. E

    1998-01-01

    The objective of this program is the development and demonstration of galvanic corrosion resistant carbon/ BMI composites through the use of reactive finishes to form coatings that isolate the carbon...

  2. The Affordable Pre-Finishing of Silicon Carbide for Optical Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Creare proposes to develop a novel, laser-assisted, pre-finishing process for chemical vapor deposition (CVD) coated silicon-carbide ceramics. Our innovation will...

  3. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  4. Conservation of filtering in manufacturing systems with unreliable machines and finished goods buffers

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2006-01-01

    nature of manufacturing systems, this law offers a tool for selecting the smallest, that is, lean, finished goods buffering, which is necessary and sufficient to ensure the desired level ofcustomer demand satisfaction.

  5. Low-Stress Silicon Cladding for Surface Finishing Large UVOIR Mirrors Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this Phase I research, ZeCoat Corporation demonstrated a low-stress silicon cladding process for surface finishing large UVOIR mirrors. A polishable cladding is...

  6. DESIGN OF FILL AND FINISH FACILITY FOR ACTIVE PHARMACEUTICAL INGREDIENTS (API

    Directory of Open Access Journals (Sweden)

    NUUR LAILA KHAIRUDDIN

    2016-08-01

    Full Text Available Fill and finish operations continue to be one of the most heavily outsourced activities in the biopharmaceutical manufacturing market today. There are a few aspects that need to be consider in outsource activities like logistic, storage condition, facility certification and audit as regulations and standards which the manufacturer should adhere. Risk would be greater and extra care should be taken when outsource from foreign fill and finish facility. Thus, the internal aseptic fill and finish facility with audit checklist will help to minimize the risk during logistic and storage and also minimize the cost for outsource fill and finish facility. The data collections are through survey and conceptual design with simulation as the execution part.

  7. Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

    OpenAIRE

    Gérard P. Cachon; Marcelo Olivares

    2010-01-01

    Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

  8. Effect of Fragrance Finish on Mechanical and Comfort Properties of Digitally Printed Fabric

    OpenAIRE

    AAMIR, Tabassum; ANWAAR, Muhammad; HUSSAIN, Ayesha; BHATTI, Nighat; JAVED, Zafar

    2015-01-01

    With the growing demands of fragrance finished fabrics especially in ladies wear, we have printed 100% cotton fabrics for both corresponding and non-corresponding prints. Digital printing technique has been used for these studies. We have already reported the positive and cost effective impact of corresponding printing along with the fragrance finishing on customer’s perception [1]. Along with the aesthetic properties of a fabric, some other properties of fabrics should be accounted for weari...

  9. Oli see uni? / Tiina Kolk

    Index Scriptorium Estoniae

    Kolk, Tiina

    2011-01-01

    Põhjamaade toote- ja moedisaini näitus "ÖÖ: Was it a dream?" Heliose kinos Tallinnas 22.-26. novembrini, kuraator Merilyn Kesküla. Osalevad Soome, Rootsi, Norra, Taani, Islandi ja Eesti disainerid. Eestlastest on esindatud Kristian Steinberg, Oliver Rüüger, Liisu Arro, Robert Mirka, Kaia Saarna, Kärt Ojavee ja Monika Järg

  10. Alguses oli Henrik / Juhan Kreem

    Index Scriptorium Estoniae

    Kreem, Juhan, 1971-

    2012-01-01

    Arvustus: Crusading and chronicle writing on the medieval Baltic frontier : a companion to the Chronicle of Henry of Livonia / edited by Marek Tamm, Linda Kaljundi, Carsten Selch Jensen. Farnham ; Burlington : Ashgate, 2011

  11. Analysis of seasonal variation in urban heat island effect for West Mediterranean Region of Turkey using Landsat 8 OLI/TIRS data

    Science.gov (United States)

    Aslan, Nagihan; KOC-SAN, Dilek

    2016-07-01

    Technological developments are accelerating day by day in 21st century which has brought social and economic developments. Besides, the word population is increasing rapidly and the majority of population lives in city center. Large and crowded cities, industrial areas and shopping centers are being built for providing human needs and wishes. For these purposes, natural resources are destroyed and urban climate is affected. The temperatures of urban areas can be warmer than the rural areas and differences in temperature between urban and surrounding rural areas were defined as Urban Heat Island (UHI). The objectives of this study are (i) to calculate Land Surface Temperatures (LST) for urban and vegetation areas in the selected cities, (ii) to determine the UHI effects and its change between seasons, (iii) to examine the relationship between city size and UHI effect magnitude. In this study, Landsat 8 OLI/TIRS imageries for winter (23 December 2013), summer (17 June 2014) and autumn (7 October 2014) seasons were used. The Antalya, Burdur and Isparta provinces that are placed in West Mediterranean Region of Turkey were selected as study areas. These three provinces have different characteristics. Antalya is the fifth biggest city of Turkey and its population growth is quite high. In addition, the summer population of this city increases severely, because of its tourism potential. On the other hand, Isparta and Burdur are relatively small cities when compared to Antalya with respect to population and urban area. In this study, firstly, the brightness temperatures and LST values are calculated from Landsat 8 thermal images. Secondly, urban areas are identified by an approach that combines emissivity image, Defense Meteorological Satellite Program - Operational Linescan System (DMSP/OLS) nighttime lights data and ASTER Global Digital Elevation Model (GDEM). In addition, the vegetation areas are defined by using emissivity image. Finally, the UHI effect is determined

  12. Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651

    Directory of Open Access Journals (Sweden)

    Walid Jomaa

    2014-02-01

    Full Text Available The surface finish was extensively studied in usual machining processes (turning, milling, and drilling. For these processes, the surface finish is strongly influenced by the cutting feed and the tool nose radius. However, a basic understanding of tool/surface finish interaction and residual stress generation has been lacking. This paper aims to investigate the surface finish and residual stresses under the orthogonal cutting since it can provide this information by avoiding the effect of the tool nose radius. The orthogonal machining of AA7075-T651 alloy through a series of cutting experiments was performed under dry conditions. Surface finish was studied using height and amplitude distribution roughness parameters. SEM and EDS were used to analyze surface damage and built-up edge (BUE formation. An analysis of the surface topography showed that the surface roughness was sensitive to changes in cutting parameters. It was found that the formation of BUE and the interaction between the tool edge and the iron-rich intermetallic particles play a determinant role in controlling the surface finish during dry orthogonal machining of the AA7075-T651 alloy. Hoop stress was predominantly compressive on the surface and tended to be tensile with increased cutting speed. The reverse occurred for the surface axial stress. The smaller the cutting feed, the greater is the effect of cutting speed on both axial and hoop stresses. By controlling the cutting speed and feed, it is possible to generate a benchmark residual stress state and good surface finish using dry machining.

  13. 40 CFR 425.30 - Applicability; description of the hair save or pulp, non-chrome tan, retan-wet finish subcategory.

    Science.gov (United States)

    2010-07-01

    ... save or pulp, non-chrome tan, retan-wet finish subcategory. 425.30 Section 425.30 Protection of... FINISHING POINT SOURCE CATEGORY Hair Save or Pulp, Non-Chrome Tan, Retan-Wet Finish Subcategory § 425.30 Applicability; description of the hair save or pulp, non-chrome tan, retan-wet finish subcategory. The...

  14. Cross-Cultural Consumer Acceptability and Purchase Intent of Forage-Finished Rib-Eye Steaks.

    Science.gov (United States)

    Torrico, Damir Dennis; Wardy, Wisdom; Pujols, Kairy Dharali; Carabante, Kennet Mariano; Jirangrat, Wannita; Scaglia, Guillermo; Janes, Marlene E; Prinyawiwatkul, Witoon

    2015-10-01

    Rib-eye steaks, from 3 forage-finished systems (S1, S2, and S3) and 1 commercial steak (C), either cooked by 1-sided-grilling or 2-sided-grilling, were evaluated for sensory acceptability [overall appearance (ORA) and overall appearance of fat (OAF) for raw steaks; overall appearance (OCA), overall beef aroma (OBA), overall beef flavor (OBF), juiciness, tenderness and overall liking (OL) for cooked steaks] and purchase intent by Hispanic, Asian and U.S. consumers. They also indicated preferred degree of doneness and cooking methods. Cross-cultural differences in preferences and consumer acceptability of rib-eye steaks were observed. Grilling was the most preferred cooking method. Hispanics and Asians preferred medium and/or medium well, while U.S. consumers preferred medium and/or medium rare. For cooked steaks, the population effect was significant for all sensory attributes; Asians generally scored lower than did Hispanics and U.S. consumers. C and S3 generally had higher scores for all sensory attributes across 3 populations. Purchase intent for all forage-finished steaks was higher for Hispanics and U.S. consumers compared to Asians (50.0% to 77.8% compared with 43.2% to 65.9%). Attributes influencing purchase intent of forage-finished steaks differed among populations: tenderness (odds ratio = 1.4) for Hispanics, OCA (odds ratio = 1.5) for Asians, and OBF (odds ratio = 1.3) for U.S. consumers. Overall, this study demonstrated that the type of forage-finished system and ethnic differences influenced sensory acceptability and purchase intent of forage-finished rib-eye steaks. Demand for forage-finished beef has increased worldwide due to its potential health benefits. Little is known regarding the cross-cultural effects on the consumer acceptance of forage-finished beef. We evaluated sensory acceptance and purchase intent of raw and cooked forage-finished rib-eye steaks using Hispanic, Asian, and U.S. (White and African American) populations. This study

  15. THE CONCEPTUAL APPARATUS OF THE TERM "FINISHED GOODS" AS AN OBJECT OF ACCOUNTING

    Directory of Open Access Journals (Sweden)

    A. Kasich

    2016-11-01

    Full Text Available The article studies scientific approaches to the definition of "finished goods"; properties and various characteristics of the finished goods, which, in the author’s opinion, affect to the term’s wording. identified generalized features of the concept and differences from the executed works and the rendered services. Described the features and the main differences the ways of production of finished goods in certain economy’s sectors and proved the necessity of taking into account the specific features during the approach to the concept of "finished goods" in various industries. Analyzed the common and distinctive features of international and national standards for the accounting of inventory, because in the conditions of globalization becomes important the necessity of their identity. investigated the components of enterprise accounting policies, such as evaluation of reserves and write-offs on trade, applied in different countries of the world, revealed a basic discrepancy, namely, the use of LiFO method, which is prohibited for use in Ukraine, which, however, is used almost in all the considered countries. On the basis of the conducted research the author’s definition of "finished goods".

  16. Meat quality of buffaloes finished in traditional or silvopastoral system in the Brazilian Eastern Amazon.

    Science.gov (United States)

    Joele, Maria Rsp; Lourenço, Lúcia Fh; Lourenço Júnior, José B; Araújo, Geisielly S; Budel, Juliana Cc; Garcia, Alexandre R

    2017-04-01

    The present study aimed to assess the physical, chemical and sensory characteristics of meat from buffaloes finished in a Traditional System (TS) or Traditional + Silvopastoral System (TSPS) with dietary supplementation. Crossbred Murrah × Mediterranean buffaloes were raised from weaning to slaughter in the TS (n = 15) or were raised in the traditional system and finished in the TSPS (n = 15). After finishing, animals were slaughtered and their carcasses refrigerated for 24 h. The right side of each half-carcass was cut between the 12th and 13th ribs and the Longissimus thoracis muscle was removed. The cranial part underwent analyses of pH, color, weight loss as a result of cooking, water holding capacity, texture and sensory characteristics, whereas the rest of the muscle underwent microbiological analyses and determination of the chemical composition, fatty acid profile and mineral content. No major difference between finishing systems was found (P > 0.05) in the physical analyses and chemical composition of meat. The percentage of myristic acid (C14:0) and the sum of polyunsaturated fatty acids differed between treatments. The TS meat had the best 'characteristic meat aroma'. Considering the quality of meat produced in the TS or TSPS, it is concluded that finishing buffaloes in the pasture still represents the best alternative. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  17. Flame retardant finishing of cotton fabric based on synergistic compounds containing boron and nitrogen.

    Science.gov (United States)

    Xie, Kongliang; Gao, Aiqin; Zhang, Yongsheng

    2013-10-15

    Boric acid and compound containing nitrogen, 2,4,6-tri[(2-hydroxy-3-trimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-HTAC) were used to finish cotton fabric. The flame retardant properties of the finished cotton fabrics and the synergetic effects of boron and nitrogen elements were investigated and evaluated by limited oxygen index (LOI) method. The mechanism of cross-linking reaction among cotton fiber, Tri-HTAC, and boric acid was discussed by FTIR and element analysis. The thermal stability and surface morphology of the finished cotton fabrics were investigated by thermogravimetric analysis (TGA) and scanning electron microscope (SEM), respectively. The finishing system of the mixture containing boron and nitrogen showed excellent synergistic flame retardancy for cotton fabric. The cotton fabric finished with mixture system had excellent flame retardancy. The LOI value of the treated cotton fabric increased over 27.5. Tri-HTAC could form covalent bonds with cellulose fiber and boric acid. The flame retardant cotton fabric showed a slight decrease in tensile strength and whiteness. The surface morphology of flame retardant cotton fiber was smooth. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Advantages of modern collapsible systems for exterior finishing of buildings in urban areas in Russia

    Directory of Open Access Journals (Sweden)

    Tolstova Kristina

    2017-01-01

    Full Text Available Traditionally, the method of finishing interior spaces, as well as exterior surfaces and architectural and structural elements of buildings and structures is widely used, when layers of building materials or finishing structures are applied in a strict sequence, allowing them to eventually form an unbroken whole - a “monolith”. This method of finishing, its technology and results not only depend significantly on the quality of the materials used and the mechanization of processes, but also require high qualification and specialization of construction workers. The execution of such a finish is more an art than a reproduced with a given level of quality of results by a technological process. An alternative to “monolith” is a variety of collapsible (they are also called “hinged” systems for finishing urban buildings, the elements of which are manufactured in the construction industry, requiring, as a rule, only installation and assembly in internal premises (the so-called “evroremont”, Or on the external surfaces of a building or structure.

  19. Improvements in Sand Mold/Core Technology: Effects on Casting Finish

    Energy Technology Data Exchange (ETDEWEB)

    Prof. John J. Lannutti; Prof. Carroll E. Mobley

    2005-08-30

    In this study, the development and impact of density gradients on metal castings were investigated using sand molds/cores from both industry and from in-house production. In spite of the size of the castings market, almost no quantitative information about density variation within the molds/cores themselves is available. In particular, a predictive understanding of how structure and binder content/chemistry/mixing contribute to the final surface finish of these products does not exist. In this program we attempted to bridge this gap by working directly with domestic companies in examining the issues of surface finish and thermal reclamation costs resulting from the use of sand molds/cores. We show that these can be substantially reduced by the development of an in-depth understanding of density variations that correlate to surface finish. Our experimental tools and our experience with them made us uniquely qualified to achieve technical progress.

  20. Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

    Science.gov (United States)

    Ahn, Jaecheol; Noguchi, Takafumi; Kitagaki, Ryoma

    2015-01-01

    Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH) method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

  1. Production of novel ceramic materials from coal fly ash and metal finishing wastes

    Energy Technology Data Exchange (ETDEWEB)

    Little, M.R.; Adell, V.; Cheeseman, C.R. [Centre for Environmental Control and Waste Management, Department of Civil and Environmental Engineering, Skempton Building, Imperial College London, London SW7 2AZ (United Kingdom); Boccaccini, A.R. [Department of Materials, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom)

    2008-09-15

    Fly ash from coal fired power stations is a potential raw material for the production of ceramic tiles, bricks and blocks. Previous work has demonstrated that the addition of metals can significantly alter fly ash sintering. Metal finishing produces problematic waste filter cakes and sludges that are increasingly difficult to dispose of to landfill. The objective of this research was to investigate the effect of selected metal finishing wastes on the properties of sintered fly ash. A 10 wt.% addition of dried metal finishing sludge obtained from the phosphate bath at a tri-cationic phosphating operation significantly reduced the sintering temperature for maximum density by approximately 75 C. The addition of the phosphate bath sludge also reduced leaching of As, to the extent that fly ash ceramics containing this waste would be classified as inert. Potential industrial applications for these novel waste-derived ceramic materials are discussed. (author)

  2. Effects of Wet and Dry Finishing and Polishing on Surface Roughness and Microhardness of Composite Resins

    Science.gov (United States)

    Nasoohi, Negin; Hoorizad, Maryam

    2017-01-01

    Objectives: This study aimed to assess the effect of wet and dry finishing and polishing on microhardness and roughness of microhybrid and nanohybrid composites. Materials and Methods: Thirty samples were fabricated of each of the Polofil Supra and Aelite Aesthetic All-Purpose Body microhybrid and Grandio and Aelite Aesthetic Enamel nanohybrid composite resins. Each group (n=30) was divided into three subgroups of D, W and C (n=10). Finishing and polishing were performed dry in group D and under water coolant in group W. Group C served as the control group and did not receive finishing and polishing. Surface roughness of samples was measured by a profilometer and their hardness was measured by a Vickers hardness tester. Data were analyzed using two-way ANOVA (Pcomposites (Pcomposites (Pcomposites (Pcomposite resins. PMID:29104597

  3. Tool path planning of spiral bevel gear for digital finishing based on finger tool

    Directory of Open Access Journals (Sweden)

    TIAN Feng

    2016-10-01

    Full Text Available In this paper,the digital machining method of the free-form surface is chosen to do the tool track planning for the spiral bevel′s digital finishing.We use the finger milling-cutter,and choose processes as roughing,semi-finishing and finishing.Based on the CC path cross-section.Through the concrete analysis,we got the reasonable processing route,the position of the tool relative to work piece as well as tool pose.We have solved the interference problem between finger tool and arbor,and demonstrate the feasibility of this method through computer simulation and actual operation process.It can help to improve the spiral bevel gear′s manufacturing.

  4. The association between measurements of antimicrobial use and resistance in the faeces microbiota of finisher batches

    DEFF Research Database (Denmark)

    Dalhoff Andersen, Vibe; de Knegt, Leonardo; Munk, Patrick

    2017-01-01

    The objectives were to present three approaches for calculating antimicrobial (AM) use in pigs that take into account the rearing period and rearing site, and to study the association between these measurements and phenotypical resistance and abundance of resistance genes in faeces samples from 10...... finisher batches. The AM use was calculated relative to the rearing period of the batches as (i) 'Finisher Unit Exposure' at unit level, (ii) 'Lifetime Exposure' at batch level and (iii) 'Herd Exposure' at herd level. A significant effect on the occurrence of tetracycline resistance measured by cultivation...... effect was observed on the occurrence of genes coding for the AM resistance classes: aminoglycoside, lincosamide, macrolide, β-lactam, sulfonamide and tetracycline. No effect was observed for Finisher Unit Exposure. Overall, the study shows that Lifetime Exposure is an efficient measurement of AM use...

  5. EFFECT OF ARTIFICIAL WEATHERING ON WOOD LAMINATES COLOR TREATED WITH TWO FINISHING PRODUCTS

    Directory of Open Access Journals (Sweden)

    Thais Jacob Mendes

    2016-03-01

    Full Text Available Weathering is one of the main reasons for the degradation of wood, especially its color. The application of finishes minimizes these effects. This study aimed to monitor the effect of artificial weathering on wood veneer of the species cumaru (Dipteryx odorata and pau marfim (Balfourodendron riedelianum with two finishes, the marine varnish and Cetol, with monitoring using a spectrophotometer. The samples were subjected to cycles of exposure to weathering for 20, 40, 52, 76, 124, 226, 430, 838 and 960 hours. The colorimetric parameters (L*, a*, b*, C and h* were measured before treatment, after application of the products and during the weathering time intervals. The application of finishes darkened veneer of cumaru wood and pau marfim in nature. However, in higher weathering times, both species returned to a lighter color, and even became lighter than the natural wood. The use of Cetol was more efficient, giving greater stability in the conservation of wood color of the species studied.

  6. Surface finish effects on the high-cycle fatigue of Alloy 718

    International Nuclear Information System (INIS)

    Korth, G.E.

    1981-01-01

    Load control high-cycle fatigue tests at 427 and 649 0 C were conducted on Alloy 718 specimens given various surface finishes. The standard surface preparation for fatigue specimens involves a low-stress grind to minimize the residual surface stresses. A low-stress grind surface was used for generating baseline data; various other surfaces that could be considered feasible for large components fabricated in commercial shops were produced on test specimens, and the high-cycle fatigue strength of each was compared. Surface finishes produced by belt sanding, grit blasting, fine machining, and electropolishing were examined. Surface roughness measurements were taken on typical specimens with each surface finish, and residual stress profiles were measured on three of the surface types. Results show little or no difference in fatigue life for the various surfaces and indicate that residual stress profile and grain size are more important factors than surface roughness in determining high-cycle fatigue strength. 12 figures, 5 tables

  7. Marketing Strategy Formulation for the Introduction of Eukula Strato German Wood Finishes in Local Market of Emerging Indian Economy

    Directory of Open Access Journals (Sweden)

    Suraj Kushe Shekhar

    2013-09-01

    Full Text Available Wood finishing relates to the process of embellishing or protecting the surface of the wood. The paper aimed at formulating a marketing strategy for introducing water borne German based Wood Finishes named Eukula Strato into local market of northern Kerala, India. Multiple cross sectional descriptive research with judgmental sampling technique elicited responses from Finishers, Furniture manufacturers and Interior designers. Findings revealed that Eukula Strato had a distinct advantage when compared to any other Wood Finish that was available in the local market. Findings and suggestions were reported as per 4P’s of marketing mix. Percentage analysis, Chi square analysis etc were used to interpret the results

  8. Abrasive wear of resin composites as related to finishing and polishing procedures.

    Science.gov (United States)

    Turssi, Cecilia P; Ferracane, Jack L; Serra, Mônica C

    2005-07-01

    Finishing and polishing procedures may cause topographical changes and introduce subsurface microcracks in dental composite restoratives. Since both of these effects may contribute toward the kinetics of wear, the purpose of this study was to assess and correlate the wear and surface roughness of minifilled and nanofilled composites finished and polished by different methods. Specimens (n=10) made of a minifilled and a nanofilled composite were finished and polished with one of the four sequences: (1) tungsten carbide burs plus Al(2)O(3)-impregnated brush (CbBr) or (2) tungsten carbide burs plus diamond-impregnated cup (CbCp), (3) diamond burs plus brush (DmBr) or (4) diamond burs plus cup (DmCp). As a control, abrasive papers were used. After surface roughness had been quantified, three-body abrasion was simulated using the OHSU wear machine. The wear facets were then scanned to measure wear depth and post-testing roughness. All sets of data were subjected to ANOVA and Tukey's tests (alpha=0.05). Pearson's correlation test was applied to check for the existence of a relationship between pre-testing roughness and wear. Significantly smoother surfaces were attained with the sequences CbBr and CbCp, whereas DmCp yielded the roughest surface. Regardless of the finishing/polishing technique, the nanofilled composite exhibited the lowest pre-testing roughness and wear. There was no correlation between the surface roughness achieved after finishing/polishing procedures and wear (p=0.3899). Nano-sized materials may have improved abrasive wear resistance over minifilled composites. The absence of correlation between wear and surface roughness produced by different finishing/polishing methods suggests that the latter negligibly influences material loss due to three-body abrasion.

  9. Comparison of two feeding finishing treatments on production and quality of organic beef

    Directory of Open Access Journals (Sweden)

    Giulio Cozzi

    Full Text Available The study compared growth and slaughter performance and meat quality of organic beef cattle finished with or without pasture grazing. One group of 10 Limousin heifers was finished under confined conditions and fed ad libitum a total mixed ration based on maize silage, hay and cereal grains. A second group of 10 Limousin heifers rotationally grazed two contiguous pasture plots of 1.5 ha each with a daily supplementation of a concentrate mix based on cereal grains and roasted soybeans. Heifers were slaughtered at commercial finishing and meat quality traits were assessed on Longissimus thoracis muscle. The grazing group, due to a lower average daily gain (0.74 vs. 0.95 kg/day; P<0.05, required a prolonged finishing period (172 vs. 155 days; P<0.05 than the confined animals. Meat samples from grazing cattle were less tender (shear force: 3.92 vs. 3.24 kg/cm2; P<0.05 and showed a lower lightness (L*: 33.0 vs. 35.8; P<0.001 and a higher redness (15.4 vs. 13.7; P<0.01 and yellowness (15.6 vs. 14.6; P<0.05. Fatty acid composition of the intramuscular fat was significantly affected by the finishing system. Grazing heifers had a higher content of polyunsaturated fatty acids (4.06 vs. 3.66% of total fatty acids; P<0.05, conjugated linoleic acids (0.16 vs. 0.10% of total fatty acids; P<0.01 and ω-3 (0.44 vs. 0.30% of total fatty acids; P<0.001 than confined animals. The detrimental effects of pasture grazing on growth performance and on some important meat quality traits explain the limited adoption of this finishing system in organic beef production.

  10. Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins.

    Science.gov (United States)

    Carneiro, Pma; Ramos, T M; de Azevedo, C S; de Lima, E; de Souza, Shj; Turbino, M L; Cesar, P F; Matos, A B

    The aim of this study was to evaluate the influence of finishing and polishing systems and toothbrush abrasion on transmittance (T) and surface roughness (Ra) of three composite resins (Filtek Z350 XT, Tetric N-Ceram, and IPS Empress Direct). Eighteen resin disks (10 mm diameter × 2 mm thick) finished by polyester strips had initial surface smoothness recorded, representing phase 1 (P1). Specimens were divided into three groups (n=6) according to the finishing/polishing instrument used (OneGloss, TopGloss, and Sof-Lex) to compose phase 2 samples (P2). Then specimens were subjected to 514 cycles of toothbrush simulation using a toothpaste slurry, with a constant load applied to soft bristles, and were then washed (phase 3=P3). After each phase, the specimens were examined by an optical profiler and spectrophotometer to measure Ra and T. Data were analyzed by analysis of variance, Tukey and Pearson tests. T values were statistically influenced by composite resin ( p=0.000) and phase of measurement ( p=0.000) factors, while the finishing/polishing system used ( p=0.741) did not affect T. On the other hand, Ra values were statistically affected by the factor finishing/polishing system ( p=0.000), but not by composite resin ( p=0.100) and phase of measurement ( p=0.451). Tetric N-Ceram and Empress Direct presented higher values of roughness when polished by OneGloss, while TopGloss and Sof-Lex showed a lower roughness. It can be concluded that composite resins transmitted more light after dental abrasion. Transmittance of composite resins was not modified by the distinct roughness created by finishing/polishing instruments.

  11. Effects of finishing diet and pre-slaughter fasting time on meat quality in crossbred pigs

    Directory of Open Access Journals (Sweden)

    K. PARTANEN

    2008-12-01

    Full Text Available The effects of the carbohydrate composition of finishing diet (fed from 80 to 107 kg of body weight and the length of pre-slaughter fasting on pork quality were studied in a 2 × 2 factorial experiment with 80 crossbred pigs. The control finishing diet was based on barley and soybean meal, and the fibrous finishing diet was based on barley, barley fibre, faba beans, and rapeseed cake. These diets contained 465 and 362 g starch and 177 and 250 g dietary fibre per kg, respectively. The fasting times of 25 and 41 h were obtained by giving the pigs their last meal at different times. Longer fasting lowered the glycolytic potential of the longissimus lumborum muscle (P = 0.01, whereas the finishing diet had no effect. Different muscles responded differently to the treatments. Longer fasting increased the ultimate pH of the semimembranosus muscle (P = 0.02, but did not affect that of the longissimus lumborum and semispinalis capitis muscles. The finishing diets did not affect the ultimate pH of the investigated muscles. A diet × fasting time interaction was seen in the lightness of the semimembranosus muscle (P = 0.05. The fibrous diet resulted in darker meat than the control diet did in pigs that were fasted for 25 h (P < 0.05. Longer fasting darkened the meat colour in pigs fed the fibrous diet (P < 0.05 but not in those fed the control diet. The meat from the semispinalis capitis muscle was darker in pigs fed the fibrous than those fed the control diet (P = 0.04. The treatments did not affect the colour of the longissimus lumborum muscle. Longer fasting decreased drip loss from the meat of pigs fed the control diet (P < 0.05. The eating quality of the pork was not influenced by the finishing diets or the fasting time. The pigs also grew equally fast on both finishing diets. In conclusion, a moderate alteration in the carbohydrate composition of a finishing diet or longer pre-slaughter fasting can have some effects on pork quality in crossbred pigs

  12. THE INFLUENCE OF GLUTEN - FREE FLOURS ON THE QUALITY INDICATORS OF BISCUIT SEMI - FINISHED PRODUCTS

    Directory of Open Access Journals (Sweden)

    К. G. IORGACHOVA

    2016-12-01

    Full Text Available The article is devoted to the research of applicability of gluten-free flours from cereal crops and from by-products of cereal crop processing - ground crumbs sifted out in a process of flake production from rice, corn and millet during the production of biscuit semi-finished products. Taking into account that viscosity is an important technological characteristic of foam-like biscuit dough, as it determines foam strength and dispersed medium stability, the influence of gluten-free flours on the structural and rheological properties of biscuit dough was studied. It is determined that the substitution of wheat flour for cereal flours leads to viscosity reduction of the dough as a consequence of absence of gluten-forming proteins in them. A comparative analysis of changes in viscous properties of biscuit dough based on flour from flakes crumb while warming it up to 60°C with dough based on cereal flours and dough based on wheat flour was held. It is shown that the presence of partially gelatinized starch granules in flour from flake crumb, as a result of technological peculiarities of their extraction, promotes greater demonstration of thickening properties already at the initial stage of baking than in cereal flours. This leads to an increase of dough viscosity and formation of desired rheological characteristics, which provide the porous structure of finished products. To provide the high quality of gluten-free biscuit semi-finished products, the recipe composition of gluten-free biscuit semi-finished product, based on flour mixture from millet flakes crumb, corn and rice flour, was optimized by using the method of mathematical design of experiments.  The porosity indicator was chosen as the criteria for the evaluation of influence of proportion of gluten-free flours on the quality of biscuit semi-finished products. The response surfaces of dependency of biscuit porosity from mass ratio of recipe components in the composite mixture were

  13. Environmental-friendly wool fabric finishing by some water plant extracts

    Directory of Open Access Journals (Sweden)

    Šmelcerović Miodrag

    2007-01-01

    Full Text Available In this article, environmental-friendly finishing of wool fabric were processed with several water extract plants, such as hibiscus, St. John's wort, and marigold. The plant extracts have good basis in the commercial dyeing of wool, for garment and carpet industry. At the same time, the environmental-friendly finishing by water extracts plants shows very good fastness of the antimicrobial properties and coloration of wool fabric. From an ecological viewpoint, the substitution of chemical dyes with "natural products" may represent not only a strategy to reduce risk and pollutants but also an opportunity for new markets and new businesses, which can expend involving of ecology in trade policy.

  14. Control software development for magnetorheological finishing of large aperture optical elements

    International Nuclear Information System (INIS)

    Zheng Nan; Li Haibo; Yuan Zhigang; Zhong Bo

    2011-01-01

    Based on the mechanism of magnetorheological finishing, the dwell time function was solved by Jansson-Van Cit-tert algorithm to accomplish the kernel module design. Then the software modularization programming, modular testing and integration testing were conducted. A verification experiment was carried out on a crystal element with full aperture of 500 mm and the element's surface achieved rapid and efficient convergence after the software controlled magnetorheological finishing. It is proved that the software could control the whole polishing process accurately. (authors)

  15. Multi-Parameter Analysis of Surface Finish in Electro-Discharge Machining of Tool Steels

    Directory of Open Access Journals (Sweden)

    Cornelia Victoria Anghel

    2006-10-01

    Full Text Available The paper presents a multi- parameter analysis of surface finish imparted to tool-steel plates by electro-discharge machining (EDM is presented. The interrelationship between surface texture parameters and process parameters is emphasized. An increased number of parameters is studied including amplitude, spacing, hybrid and fractal parameters,, as well. The correlation of these parameters with the machining conditions is investigated. Observed characteristics become more pronounced, when intensifying machining conditions. Close correlation exists between certain surface finish parameters and EDM input variables and single and multiple statistical regression models are developed.

  16. Digital Restoration from Start to Finish How to repair old and damaged photographs

    CERN Document Server

    Ctein,

    2010-01-01

    Digital Restoration: Start to Finish 2nd edition guides you step-by-step through the entire process of restoring old photographs and repairing new ones using Adobe Photoshop, Picture Window, and now Elements. Nothing is left out, from choosing the right hardware and software and getting the photographs into the computer, to getting the finished photo out of the computer and preserving it for posterity.  LEARN HOW TO: Scan faded and damaged prints or films Improve snapshots with Shadow/Highlight adjustment Correct uneven exposure Fix color and skin tones quickly with Curves, plug-ins, a

  17. The performance of broiler finisher birds fed varying levels of feather ...

    African Journals Online (AJOL)

    The performance of broiler finisher birds fed varying levels of feather meal as replacement for soya bean meal. ... meal increased, feed cost/ kg weight gain increased and both differed significantly (P<0.05) between treatment means, while the birds tolerated feather meal up to 7.5% inclusion level, 2.5% was the optimal.

  18. Fungi as the main factor in the degradation of the floor finish „Lentex"

    Directory of Open Access Journals (Sweden)

    Jolanta Milewska

    2014-08-01

    Full Text Available The mycological analysis of samples of the floor finish Lentex was performed. The isolation layer from natural fibers and the outer layer of polyvinyl chloride (PVC were analyzed. The mechanism of infection of this material by soil fungi was determined and a considerable risk to human health from thc isolated species was found.

  19. Wheat-straw as roughage component in finishing diets of growing ...

    African Journals Online (AJOL)

    Wheat-straw as roughage component in finishing diets of growing lambs. TS Brand, SWP Cloete, F Franck, GD van der Merwe. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL.

  20. Evaluation of Kola-Pod Husk Meal in Broiler Finisher Diets ...

    African Journals Online (AJOL)

    Nigeria is the world's largest producer of kola nut. The pod husk, which constitutes over 50% of the kola fruit, has been a farm waste to date. Its crude protein content which is similar to that of maize suggests that it is possible to partially replace maize with pod husk meal (KPHM) in broiler finisher diets. In this study, KPHM ...

  1. Occurrence of neonicotinoid insecticides in finished drinking water and fate during drinking water treatment

    Science.gov (United States)

    Klarich, Kathryn L.; Pflug, Nicholas C.; DeWald, Eden M.; Hladik, Michelle L.; Kolpin, Dana W.; Cwiertny, David M.; LeFevre, Gergory H.

    2017-01-01

    Neonicotinoid insecticides are widespread in surface waters across the agriculturally-intensive Midwestern US. We report for the first time the presence of three neonicotinoids in finished drinking water and demonstrate their general persistence during conventional water treatment. Periodic tap water grab samples were collected at the University of Iowa over seven weeks in 2016 (May-July) after maize/soy planting. Clothianidin, imidacloprid, and thiamethoxam were ubiquitously detected in finished water samples and ranged from 0.24-57.3 ng/L. Samples collected along the University of Iowa treatment train indicate no apparent removal of clothianidin and imidacloprid, with modest thiamethoxam removal (~50%). In contrast, the concentrations of all neonicotinoids were substantially lower in the Iowa City treatment facility finished water using granular activated carbon (GAC) filtration. Batch experiments investigated potential losses. Thiamethoxam losses are due to base-catalyzed hydrolysis at high pH conditions during lime softening. GAC rapidly and nearly completely removed all three neonicotinoids. Clothianidin is susceptible to reaction with free chlorine and may undergo at least partial transformation during chlorination. Our work provides new insights into the persistence of neonicotinoids and their potential for transformation during water treatment and distribution, while also identifying GAC as an effective management tool to lower neonicotinoid concentrations in finished drinking water.

  2. Efficacy of XP-endo Finisher File in Removing Calcium Hydroxide from Simulated Internal Resorption Cavity.

    Science.gov (United States)

    Keskin, Cangül; Sariyilmaz, Evren; Sariyilmaz, Öznur

    2017-01-01

    The aim of this study was to evaluate the effect of supplementary use of XP-endo Finisher file, passive ultrasonic activation (PUI), EndoActivator (EA), and CanalBrush (CB) on the removal of calcium hydroxide (CH) paste from simulated internal resorption cavities. The root canals of 110 extracted single-rooted teeth with straight canals were prepared up to size 50. The specimens were split longitudinally, and standardized internal resorption cavities were prepared with burs. The cavities and root canals were filled with CH paste. The specimens were divided into 5 groups as follows: XP-endo Finisher, EA, PUI, CB, and syringe irrigation (SI). The root canals were irrigated with 5.25% NaOCl and 17% EDTA for 2 minutes, respectively. Apart from the SI group, both solutions were activated by using tested techniques for 1 minute. The quantity of CH remnants on resorption cavities was scored. Data were analyzed by using Kruskal-Wallis H and Mann-Whitney U tests. XP-endo Finisher and PUI removed significantly more CH than SI, EA, and CB (P  .05). Differences among SI, EA, and CB were also non-significant (P > .05). None of the tested techniques render the simulated internal resorption cavities free of CH debris. XP-endo Finisher and PUI were superior to SI, CB, and EA. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  3. Finishes checklist : a guide to achieving optimum coating performance on exterior wood surfaces

    Science.gov (United States)

    Tony Bonura; Steve Bussjeager; Lynne Christensen; George Daisey; Tom Daniels; Mark Hirsch; Charles J. Jourdain; D. Douglas Mall; Bob Springate; Louis E. Wagner; Warren Harry; R. Sam Williams

    2004-01-01

    When the time comes for a consumer to select the wood and finish types for a given outdoor project, there is a wide variety of sources of information, articles, and opinions available. Occasionally, these sources will conflict, mostly due to the data available at the time of publication, or practical experience based on a snapshot of conditions at a given time period....

  4. POTENTIAL USE OF COLLAGEN HYDROLYSATES FROM CHAMOIS LEATHER WASTE AS INGREDIENT IN LEATHER FINISHING FORMULATIONS

    Directory of Open Access Journals (Sweden)

    POPA Emil

    2016-05-01

    Full Text Available The aim of this paper is the obtaining of value-added products from the dust resulted from chamois leather buffering, a solid waste that raises serious disposal problems, due to its physical state and complex chemical composition. Starting from leather waste, an alkaline hydrolysis was performed followed by the chemical modification of the polypeptyde hydrolysate by polycondensation with dispersions of copolymers of vinyl acetate with acrylic esters and reticulation with glutaraldehyde in order to improve its hydrophobicity. The resulted product can be used/was tested as an ingredient in leather finishing formulations, as binder or carrier agent. In this paper, new finishing mixtures were prepared using pigments and obtained polypeptide hydrolysates as a substitute for casein in pigment pastes. By this method, there were obtained two experimental variants of brown and black pigment pastes which were compared to the pigment pastes with casein binder. Natural grain Box bovine leather samples coated with such admixtures were subjected to physico-mechanical resistance tests, in accordance with the standardized methods. Specific tests carried on finished leather – tensile strength, tear resistance, resistance to grain cracking, dry and wet rubbing fastness, flexural fatigue strength test, etc – showed values of this characteristics comparable to those obtained with casein conventional finishing.

  5. Microgel-based surface modifying system for stimuli-responsive functional finishing of cotton

    NARCIS (Netherlands)

    Kulkarni, A.N.; Tourrette, A.; Warmoeskerken, Marinus; Jocic, D.

    2010-01-01

    An innovative strategy for functional finishing of textile materials is based on the incorporation of a thin layer of surface modifying systems (SMS) in the form of stimuli-sensitive microgels or hydrogels. Since the copolymerization of poly(N-isopropylacrylamide) with an ionizable polymer, such as

  6. Effects of surface finishing conditions on the biocompatibility of a nickel-chromium dental casting alloy.

    LENUS (Irish Health Repository)

    McGinley, Emma Louise

    2011-07-01

    To assess the effects of surface finishing condition (polished or alumina particle air abraded) on the biocompatibility of direct and indirect exposure to a nickel-chromium (Ni-Cr) d.Sign®10 dental casting alloy on oral keratinocytes. Biocompatibility was performed by assessing cellular viability and morphology, metabolic activity, cellular toxicity and presence of inflammatory cytokine markers.

  7. Surface roughness and hardness of a composite resin: influence of finishing and polishing and immersion methods

    Directory of Open Access Journals (Sweden)

    Ana Luísa Botta Martins de Oliveira

    2010-09-01

    Full Text Available This study evaluated the finishing and polishing effect on the surface roughness and hardness of the Filtek Supreme XT, in fluoride solutions. Specimens were prepared (n = 140 with half of the samples finished and polished with Super-Snap® disks. The experimental groups were divided according to the presence or absence of finishing and polishing and immersion solutions (artificial saliva, sodium fluoride solution at 0.05% - manipulated, Fluordent Reach, Oral B, Fluorgard. The specimens remained immersed in artificial saliva for 24 hours and were then subjected to initial analysis (baseline of surface roughness and Vickers microhardness. Next, they were immersed in different fluoride solutions for 1 min/day, for 60 days. Afterwards, a new surface roughness and microhardness reading was conducted. The data were submitted to a two-way ANOVA and Tukey's test (5% significance level. For the comparison of mean roughness and hardness at baseline and after 60 days, the paired Student t test was used. The results showed that the surface roughness and microhardness of the Filtek Supreme XT were influenced by the finishing and polishing procedure, independently of the immersion methods.

  8. Identification of post-mortem indicators of welfare of finishing pigs on the day of slaughter

    DEFF Research Database (Denmark)

    Brandt, Pia; Rousing, Tine; Herskin, Mette S

    2013-01-01

    potential welfare indicators for future documentation of welfare of finishing pigs at commercial abattoirs. Behavioural and clinical observations were carried out at unloading, in the lairage and in the race to the stunning chamber in the abattoir. During lairage, behavioural recordings were performed...

  9. Wheat-straw as roughage component in finishing diets of growing ...

    African Journals Online (AJOL)

    to use wheat-straw in diets, this study was conducted (i) to determine the degree whereto the inclusion of wheat-straw in finishing diets for lambs affected digestibility, N retention and animal performance, and (ii) to evaluate ammoniated wheat straw as roughage component in a balanced diet, containing. >60% concentrates ...

  10. Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs

    NARCIS (Netherlands)

    Aboushelib, M.N.

    2012-01-01

    Purpose: The aim of this study was to evaluate the effect of finish line design on the fatigue, fracture resistance, and failure type of veneered zirconia restorations. Materials and Methods: A CAD/CAM system (Cercon) was used to prepare zirconia frameworks (0.5 mm thick) for a maxillary central

  11. ANTIMICROBIAL REAGENTS AS FUNCTIONAL FINISHING FOR TEXTILES INTENDED FOR BIOMEDICAL APPLICATIONS. I. SYNTHETIC ORGANIC COMPOUNDS

    Directory of Open Access Journals (Sweden)

    Madalina Zanoaga

    2014-06-01

    Full Text Available This article offers an overview of some contemporary antimicrobial (biocides and biostatics agents used as functional finishing for textiles intended for biomedical applications. It reviews only synthetic agents, namely quaternary ammonium compounds, halogenated phenols, polybiguanides, N-halamines, and renewable peroxides, as a part of an extensive study currently in progress.

  12. Prediction of manure nitrogen and carbon output from grower-finisher pigs

    DEFF Research Database (Denmark)

    Vu Thi Khanh, Van; Prapaspongsa, Trakarn; Poulsen, Hanne Damgaard

    2009-01-01

    . This study has developed algorithms for predicting the amount of excreta and manure content of nitrogen (N) and carbon (C). Data compiled from 285 digestibility and N balance experiments with growing-finishing pigs diets fed diets varying widely in chemical composition were used to establish algorithms...

  13. Effect of protein level on performance, nitrogen utilisation and carcass composition in finisher pigs

    DEFF Research Database (Denmark)

    Nørgaard, Jan Værum; Hansen, Michael Jørgen; Assadi Soumeh, Elham

    2014-01-01

    For 6 weeks, 256 female finisher pigs (initially 53.9 kg) were fed four dietary treatments of 136, 148, 159 and 168 g crude protein (CP)/kg diet. The latter diet was the 159 g CP/kg diet supplemented with dispensable amino acids, to study the effect of excess CP. Week 4 included use of metabolic...

  14. Effects of dietary carbohydrates and buffering capacity on nutrient digestibility and manure characteristics in finishing pigs

    NARCIS (Netherlands)

    Mroz, Z.; Moeser, A.J.; Vreman, K.; Diepen, van J.T.; Kempen, van T.; Canh, T.T.; Jongbloed, A.W.

    2000-01-01

    A 2 × 3 factorial experiment was conducted with 24 finishing pigs (Yorkshire x [Finnish Landrace x Dutch Landrace]) to determine the effects of dietary buffering capacity (BC) and carbohydrate sources on apparent total tract digestibility (TD), N retention, and manure characteristics. Twelve of

  15. Heterogeneity among methicillin-resistant Staphylococcus aureus from Italian pig finishing holdings

    DEFF Research Database (Denmark)

    Battisti, A.; Franco, A.; Merialdi, G.

    2010-01-01

    A survey for methicillin-resistant Staphylococcus aureus (MRSA) in finishing pig holdings was carried out in Italy in 2008. MRSA isolates were characterised by spa-. SCCmec- and antimicrobial susceptibility typing. A prevalence of 38% (45/118, 95% CI 29.4-46.9%) positive holdings was observed...

  16. Effect Of Time Of Change From Starter To Finisher Ration On The ...

    African Journals Online (AJOL)

    A study involving 450 Lohmann Brown day-old broiler chicks was conducted to determine the optimum period of change from starter to finisher ration in the humid climate of South Eastern Nigeria. The broiler chicks were divided into 3 groups and the groups fed commercial starter ration (22% CP; 11.91 MJ.kg M.E.) for 28 ...

  17. A transcript finishing initiative for closing gaps in the human transcriptome

    DEFF Research Database (Denmark)

    Sogayar, Mari Cleide; Camargo, Anamaria A; Bettoni, Fabiana

    2004-01-01

    We report the results of a transcript finishing initiative, undertaken for the purpose of identifying and characterizing novel human transcripts, in which RT-PCR was used to bridge gaps between paired EST clusters, mapped against the genomic sequence. Each pair of EST clusters selected for experi...

  18. Effect of surface finishing on the oxidation behaviour of a ferritic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Ardigo-Besnard, M.R., E-mail: maria-rosa.ardigo-besnard@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Popa, I.; Heintz, O.; Chassagnon, R. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Vilasi, M. [Institut Jean Lamour, UMR 7198 CNRS—Université de Lorraine, Parc de Saurupt, 54011 Nancy (France); Herbst, F. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Girardon, P. [APERAM, Centre de Recherche, BP15, 62330 Isbergues (France); Chevalier, S. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France)

    2017-08-01

    Highlights: • Study of surface finishing effect on the corrosion behaviour of a stainless steel. • Mirror polished samples were compared to as-rolled material. • Two oxidation mechanisms were identified depending on the surface finishing. • Before oxidation, native chemical phases are identical for both samples. • Subsurface dislocations generated by the polishing process promote Cr{sub 2}O{sub 3} formation. - Abstract: The corrosion behaviour and the oxidation mechanism of a ferritic stainless steel, K41X (AISI 441), were evaluated at 800 °C in water vapour hydrogen enriched atmosphere. Mirror polished samples were compared to as-rolled K41X material. Two different oxidation behaviours were observed depending on the surface finishing: a protective double (Cr,Mn){sub 3}O{sub 4}/Cr{sub 2}O{sub 3} scale formed on the polished samples whereas external Fe{sub 3}O{sub 4} and (Cr,Fe){sub 2}O{sub 3} oxides grew on the raw steel. Moreover, isotopic marker experiments combined with SIMS analyses revealed different growth mechanisms. The influence of surface finishing on the corrosion products and growth mechanisms was apprehended by means of X-ray photoelectron spectroscopy (XPS) and residual stress analyses using XRD at the sample surfaces before ageing.

  19. Finishing: Construction Industry Series: Preparation Level: Student Manual and Instructor's Guide.

    Science.gov (United States)

    Texas Education Agency, Austin. Dept. of Occupational Education and Technology.

    The guide is an outline of training experiences designed to lead a student to at least entry-level job proficiency in the finishing trades within the construction industry. Teaching units cover insulating, drywall, painting and wall covering, glass and glazing, floor covering, and landscaping. Each unit has several overall objectives which are…

  20. Energy costs of feeding excess protein from corn-based byproducts to finishing cattle

    Science.gov (United States)

    The increased use of byproducts in finishing diets leads to diets that contain greater concentrations of CP and MP than required by cattle. The hypothesis was that excess dietary CP and MP would increase maintenance energy requirments due to the energy costs of removing excess N as urea in urine. ...

  1. [Comparative study of microleakage by using different finished lines in selective laser melting metal crowns].

    Science.gov (United States)

    Peng, Yan; Zhong, Qun; Wu, Xue-Ying; Weng, Jia-Wei

    2016-12-01

    To evaluate microleakage of SLM Co -Cr alloy metal crown with two types finished line (chamfer and shoulder), compared with conventional fabrication of Co -Cr alloy metal crowns. Thirty healthy non-carious human molars were selected and randomly assigned to 3 groups, 10 in each. Teeth in group A and C received a chamfer finish line preparation, whereas teeth in group C received a shoulder finish line. Conventional Co -Cr alloy metal crowns were fabricated for group A when SLM metal crowns were made for group B and group C. Glass ionomer was applied for bonding. After 5000 thermocycles ranging from 5degrees centigrade to 55degrees centigrade,all the specimens were evaluated by dye penetration and then microleakage was examined under light microscope. The data were analyzed statistically with SPSS 20.0 software package. Microleakage in group A was significantly higher than the other two groups, group B and group C showed no significant difference in microleakage while microleakage in group B was higher than that in group C. Microleakage of SLM metal crowns was significantly less than that of conventional Co-Cr alloy metal crowns; chamfer finish line designs was recommended for SLM metal crowns in consideration of reducing microleakage and protecting tooth.

  2. Meat quality of lambs produced in the Mesopotamia region of Argentina finished on different diets.

    Science.gov (United States)

    Perlo, F; Bonato, P; Teira, G; Tisocco, O; Vicentin, J; Pueyo, J; Mansilla, A

    2008-07-01

    The meat quality of Corriedale lambs (40kg live weight) produced in the Mesopotamia region (Argentina) was assessed. These lambs had different finishing diets: only native grass pasture, ground alfalfa and alfalfa-linseed pellet (70/30). Carcass yield, longissimus dorsi area, backfat thickness, marbling, pH, meat and subcutaneous fat color, cooking loss, Warner-Bratzler shear force, fat, protein and moisture content were determined. Lambs finished on alfalfa-linseed pellet had the highest carcasses yield and backfat thickness and their meat had a lighter color (higher L(∗) value), higher marbling and tenderness than meat from lambs reared on native grass pasture. Grass-based finishing can lead to the production of leaner meat, with a more reddish color (higher a(∗) value). The ground alfalfa finishing diet seems to be intermediate between native grass pasture and alfalfa-linseed pellet with respect to carcass yield, backfat and meat color. In addition, the animals fed on ground alfalfa showed the highest muscle area.

  3. Heavy metals in foodstuffs. Pt. 5. Cobalt content of raw cacao and finished cacao products

    Energy Technology Data Exchange (ETDEWEB)

    Knezevic, G.

    1987-01-01

    By means of the graphite-tube oven technique we determined cobalt contents in raw cacao and in some finished cacao products. The cobalt content increases with an increasing percentage of cacao in the product; a decisive factor is where the cacao utilized comes from.

  4. The association between measurements of antimicrobial use and resistance in the faeces microbiota of finisher batches.

    Science.gov (United States)

    Andersen, V D; DE Knegt, L V; Munk, P; Jensen, M S; Agersø, Y; Aarestrup, F M; Vigre, H

    2017-10-01

    The objectives were to present three approaches for calculating antimicrobial (AM) use in pigs that take into account the rearing period and rearing site, and to study the association between these measurements and phenotypical resistance and abundance of resistance genes in faeces samples from 10 finisher batches. The AM use was calculated relative to the rearing period of the batches as (i) 'Finisher Unit Exposure' at unit level, (ii) 'Lifetime Exposure' at batch level and (iii) 'Herd Exposure' at herd level. A significant effect on the occurrence of tetracycline resistance measured by cultivation was identified for Lifetime Exposure for the AM class: tetracycline. Furthermore, for Lifetime Exposure for the AM classes: macrolide, broad-spectrum penicillin, sulfonamide and tetracycline use as well as Herd Unit Exposure for the AM classes: aminoglycoside, lincosamide and tetracycline use, a significant effect was observed on the occurrence of genes coding for the AM resistance classes: aminoglycoside, lincosamide, macrolide, β-lactam, sulfonamide and tetracycline. No effect was observed for Finisher Unit Exposure. Overall, the study shows that Lifetime Exposure is an efficient measurement of AM use in finisher batches, and has a significant effect on the occurrence of resistance, measured either by cultivation or metagenomics.

  5. Meat goat kids finished on alfalfa, red clover, or orchardgrass pastures: Carcass merit and meat quality

    Science.gov (United States)

    This experiment was conducted in 2005-2007 to evaluate carcass and meat quality parameters when meat goat kids were finished on alfalfa (Medicago sativa L; ALF); red clover (Trifolium pretense L.; RCG); or orchardgrass (Dactylis glomerata L; OGR) pastures. Final shrunk body weights were similar whe...

  6. 40 CFR Figure 1 to Subpart Tttt of... - Example Logs for Recording Leather Finish Use and HAP Content

    Science.gov (United States)

    2010-07-01

    ... usage(pounds) HAP Content(mass fraction) Date and time Operator's name Product process operation Monthly Summary of Finish Usage Upholstery leather(≥4 grams) Upholstery leather(Water-resistant/specialty leather Nonwater-resistant leather Number of Entries Total Finish Usage (pounds) Total HAP Usage...

  7. Fundamentals of figure control and fracture-'free' finishing for high aspect ratio laser optics

    Energy Technology Data Exchange (ETDEWEB)

    Suratwala, Tayyab [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-10-01

    The high level objectives of the this work were to: 1) scientifically understand critical phenomena affecting the surface figure during full aperture finishing; 2) utilize these fundamentals to more deterministically control the surface figure during finishing; 3) successfully polish under rogue particle-‘free’ environments during polishing by understanding/preventing key sources of rogue particles.

  8. Endocannabinoid concentrations in plasma during the finishing period are associated with feed efficiency and carcass composition of beef cattle

    Science.gov (United States)

    We previously have shown that plasma concentrations of endocannabinoids (EC) are positively correlated with feed efficiency and leaner carcasses in finishing steers. However, whether the animal growth during the finishing period affects the concentration of EC is unknown. The objective of this study...

  9. 24 CFR 200.946 - Building product standards and certification program for exterior finish and insulation systems...

    Science.gov (United States)

    2010-04-01

    ... System (EIFS), Class PB. (xiv) EIMA Test Method 105.01-95—Standard Test Method for Alkali Resistance of... the administrator's mark shall be permanently affixed on the package or container of base and finish...) The minimum thickness of the base and finish coatings. (3) The fiberglass mesh is installed properly...

  10. Comparison of vitality states of finishers and withdrawers in trail running: An enactive and phenomenological perspective.

    Science.gov (United States)

    Rochat, Nadège; Hauw, Denis; Antonini Philippe, Roberta; Crettaz von Roten, Fabienne; Seifert, Ludovic

    2017-01-01

    Studies on ultra-endurance suggest that during the races, athletes typically experience three vitality states (i.e., preservation, loss, and revival) at the phenomenological level. Nevertheless, how these states contribute to the management and outcome of performance remains unclear. The aim of this study was to determine whether and how the vitality states experienced by runners and their evolution during a trail race can be used to distinguish finishers from withdrawers. From an enactive and phenomenological framework, we processed enactive interviews and blog posts of race narratives. We distinguished units of meaning, which were grouped into sequences of experience; each sequence was then categorized as one of the three vitality states: state of vitality preservation (SVP), state of vitality loss (SVL) or state of vitality revival (SVR). We analyzed the distribution of these vitality states and their temporal organization at the beginning, in the second and third quarters, and at the end of the races, and we qualitatively characterized runners' adaptations to SVL. Results showed that finishers completed the race in SVP, with overall significantly more sequences in SVP and significantly fewer sequences in SVL than withdrawers. SVR did not discriminate finishers from withdrawers. The temporal organization of the vitality states showed a significant difference in the emergence of SVP from the second quarter of the race, as well as a significant difference in the emergence of SVL from the third quarter of the race. The analysis of adaptations to SVL confirmed that finishers were more capable of exiting SVL by enacting a preservation world when they felt physical or psychological alerts, whereas withdrawers remained in SVL. Our results showed that finishers and withdrawers did not enact the same phenomenological worlds in the race situation, especially in the organization of vitality adaptations and their relationships to difficulties; the cumulative effect of the

  11. Comparison of vitality states of finishers and withdrawers in trail running: An enactive and phenomenological perspective.

    Directory of Open Access Journals (Sweden)

    Nadège Rochat

    Full Text Available Studies on ultra-endurance suggest that during the races, athletes typically experience three vitality states (i.e., preservation, loss, and revival at the phenomenological level. Nevertheless, how these states contribute to the management and outcome of performance remains unclear. The aim of this study was to determine whether and how the vitality states experienced by runners and their evolution during a trail race can be used to distinguish finishers from withdrawers. From an enactive and phenomenological framework, we processed enactive interviews and blog posts of race narratives. We distinguished units of meaning, which were grouped into sequences of experience; each sequence was then categorized as one of the three vitality states: state of vitality preservation (SVP, state of vitality loss (SVL or state of vitality revival (SVR. We analyzed the distribution of these vitality states and their temporal organization at the beginning, in the second and third quarters, and at the end of the races, and we qualitatively characterized runners' adaptations to SVL. Results showed that finishers completed the race in SVP, with overall significantly more sequences in SVP and significantly fewer sequences in SVL than withdrawers. SVR did not discriminate finishers from withdrawers. The temporal organization of the vitality states showed a significant difference in the emergence of SVP from the second quarter of the race, as well as a significant difference in the emergence of SVL from the third quarter of the race. The analysis of adaptations to SVL confirmed that finishers were more capable of exiting SVL by enacting a preservation world when they felt physical or psychological alerts, whereas withdrawers remained in SVL. Our results showed that finishers and withdrawers did not enact the same phenomenological worlds in the race situation, especially in the organization of vitality adaptations and their relationships to difficulties; the cumulative

  12. Finishing and Special Motifs: Lessons Learned from CRISPR Analysis Using Next-Generation Draft Sequences (7th Annual SFAF Meeting, 2012)

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Catherine

    2012-06-01

    Catherine Campbell on "Finishing and Special Motifs: Lessons learned from CRISPR analysis using next-generation draft sequences" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  13. Pengaruh Suhu dan Metode Perlakuan Panas terhadap Sifat Fisika dan Kualitas Finishing Kayu Mahoni

    Directory of Open Access Journals (Sweden)

    Ragil Widyorini

    2016-03-01

    Full Text Available Perlakuan panas dikenal sebagai metode yang dapat digunakan untuk meningkatkan stabilitas dimensi dan menurunkan higroskopisitas. Di sisi lain, perlakuan panas dapat membuat warna kayu menjadi lebih gelap, penurunan sifat mekanika kayu, dan sifat wetabilitas kayu. Oleh karena itu, penelitian mengenai perlakuan panas pada kondisi yang optimum sangat menarik untuk dilakukan agar menghasilkan kayu dengan kualitas yang lebih baik. Tujuan penelitian ini adalah mengetahui pengaruh interaksi suhu dan metode perlakuan panas terhadap sifat fisika dan kualitas finishing kayu mahoni. Contoh uji perlakuan dibuat dari kayu mahoni yang berasal dari industri penggergajian kayu rakyat. Penelitian ini menggunakan 2 metode perlakuan panas yaitu metode oven dan penguapan (steaming pada variasi suhu 90°C, 120°C, dan 150°C selama 2 jam waktu efektif. Pengujian sifat fisika diuji berdasarkan standar ASTM, yang meliputi : kadar air seimbang, perubahan dimensi, perubahan warna, dan wetabilitas. Pengujian finishing meliputi cross cut test, uji delaminasi, dan uji kekilapan (glossy test. Hasil penelitian menunjukkan bahwa interaksi antara suhu dan metode perlakuan panas berpengaruh sangat nyata terhadap perubahan warna, serta berpengaruh nyata terhadap penyusutan radial, cross cut test, dan uji delaminasi. Metode oven menghasilkan contoh uji dengan kadar air dan pengembangan radial yang lebih rendah, warna yang lebih terang, serta uji delaminasi yang lebih baik dibandingkan dengan metode penguapan. Kata kunci: perlakuan panas, metode oven, metode penguapan, suhu, finishing   Effect of temperature and heat treatment on physical properties and finishing quality of mahagony wood Abstract Heat treatment is well known as a method for increasing dimensional stability and reducing hygroscopicity of wood. However, heat tratment can cause the color of wood become darker and reduce the wettability, as well as its mechanical properties. Therefore, the optimum condition of heat

  14. Application of eco-friendly antimicrobial finish butea monosperma leaves on fabric properties of polyester and cotton/polyester

    International Nuclear Information System (INIS)

    Sadaf, S.; Saeed, M.; Kalsoom, S.; Saeed, M.

    2017-01-01

    The study was aimed to check the effect of eco-friendly antimicrobial finish on 100% polyester and 50/50 cotton/polyester woven fabrics. The leaves' extract of Butea monosperma was used as an eco-friendly antimicrobial finish. The fabric was first desized, scoured, bleached and washed then antimicrobial finish was applied by using pad dry cure method. The aesthetic, comfort and mechanical fabrics properties were checked before and after applying antimicrobial finish. Under aesthetic property stiffness and smoothness appearance was checked, under comfort related property absorbency and air permeability was checked and under mechanical property tear and tensile strength was checked. The antimicrobial finish was checked by using ASTEM E2149 Shake Flask method. The AATCC and ISO standard testing methods were used for checking fabric properties. One way ANOVA statistical test was applied for analysis of results. Antimicrobial finish has increased aesthetic (stiffness, smoothness appearance), comfort (absorbency, air permeability) and mechanical (tensile and tear strengths) properties of polyester and cotton/polyester fabrics. The antimicrobial finish was effective on both 100% polyester and 50/50 cotton/polyester fabrics up to 25 washes. This study is beneficial to medical industry, paramedical staff, sports wears, home furnishing as well as common people. (author)

  15. HEAT INSULATING LIME DRY MORTARS FOR FINISHING OF WALLS MADE OF FOAM CONCRETE

    Directory of Open Access Journals (Sweden)

    Loganina Valentina Ivanovna

    2016-05-01

    Full Text Available Different aerated mortars are used for pargeting of walls made of aerated concrete. Though the regulatory documents don’t specify the dependence of plaster density from the density grade of gas-concrete blocks. In case of facing of gas-concrete blocks with the grade D500 using plaster mortars with the density 1400…1600 km/m3 there occurs a dismatch in the values of thermal insulation and vapor permeability of the plaster and base. The authors suggest using dry mortars for finishing of gas-concrete block of the grades D500 и D600, which allow obtaining facing thermal insulating coatings. The efficiency of using four different high-porous additives in the lime dry mortar was compared. They were: hollow glass microspheres, aluminosilicate ash microspheres, expanded vermiculite sand, expanded pearlitic sand. The high efficiency of hollow glass microspheres in heat insulating finishing mortars compared to other fillers is proved.

  16. A Study on Salt Attack Protection of Structural and Finishing Materials in Power Plant Structures

    Energy Technology Data Exchange (ETDEWEB)

    Kim, W.B.; Kweon, K.J.; Suh, Y.P.; Nah, H.S.; Lee, K.J.; Park, D.S.; Jo, Y.K. [Korea Electric Power Research Institute, Taejeon (Korea, Republic of)

    1997-12-31

    This is a final report written by both KEPRI and KICT as a co-operative research titled {sup A} study on Salt Protection of Structural and Finishings in Power Plant Structures{sup .} This study presented the methods to prevent the chloride-induced corrosion of power plant structures through collection and analysis of research datum relating to design, construction and maintenance for the prevention of structural and finishing materials, thru material performance tests for anti-corrosion under many kinds of chloride-induced corrosion environments. As a result, this study proposed the guidelines for design, construction and maintenance of power plant structures due to chloride-induced corrosion. (author). 257 refs., 111 figs., 86 tabs.

  17. Conservation of filtering in manufacturing systems with unreliable machines and finished goods buffers

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available This paper addresses the issue of reliable satisfaction of customer demand by unreliable production systems. In the framework of a simple production-storage-customer model, we show that this can be accomplished by using an appropriate level of filtering of production randomness. The filtering is ensured by finished goods buffers (filtering in space and shipping periods (filtering in time. The following question is considered: how are filtering in space and filtering in time interrelated? As an answer, we show that there exists a conservation law: in lean manufacturing systems, the amount of filtering in space multiplied by the amount of filteringin time (both measured in appropriate dimensionless units ispractically constant. Along with providing an insight into the nature of manufacturing systems, this law offers a tool for selecting the smallest, that is, lean, finished goods buffering, which is necessary and sufficient to ensure the desired level ofcustomer demand satisfaction.

  18. Project Plan For Remove Special Nuclear Material (SNM) from Plutonium Finishing Plant (PFP) Project

    International Nuclear Information System (INIS)

    BARTLETT, W.D.

    1999-01-01

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove SNM Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617. This project plan is the top-level definitive project management document for the PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baseline to manage the execution of the Remove SNM Materials project. Any deviation to the document must be authorized through the appropriate change control process. The Remove SNM Materials project provides the necessary support and controls required for DOE-HQ, DOE-RL, BWHC, and other DOE Complex Contractors the path forward to negotiate shipped/receiver agreements, schedule shipments, and transfer material out of PFP to enable final deactivation

  19. Project plan remove special nuclear material from PFP project plutonium finishing plant; TOPICAL

    International Nuclear Information System (INIS)

    BARTLETT, W.D.

    1999-01-01

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove Special Nuclear Material (SNM) Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617,Rev. 0. This project plan is the top-level definitive project management document for PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Remove SNM Materials project. Any deviations to the document must be authorized through the appropriate change control process

  20. Project plan remove special nuclear material from PFP project plutonium finishing plant

    International Nuclear Information System (INIS)

    BARTLETT, W.D.

    1999-01-01

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove Special Nuclear Material (SNM) Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617, Rev. 0. This project plan is the top-level definitive project management document for PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Remove SNM Materials project. Any deviations to the document must be authorized through the appropriate change control process

  1. Study of Chromium Removal by the Electrodialysis of Tannery and Metal-Finishing Effluents

    Directory of Open Access Journals (Sweden)

    Ruan C. A. Moura

    2012-01-01

    Full Text Available The metal-finishing and tannery industries have been under strong pressure to replace their current wastewater treatment based on a physicochemical process. The electrodialysis process is becoming an interesting alternative for wastewater treatment. Electrodialysis is a membrane separation technique, in which ions are transported from one solution to another through ion-exchange membranes, using an electric field as the driving force. Blends of polystyrene and polyaniline were obtained in order to produce membranes for electrodialysis. The produced membranes were applied in the recovery of baths from the metal-finishing and tannery industries. The parameter for electrodialysis evaluation was the percentage of chromium extraction. The results obtained using these membranes were compared to those obtained with the commercial membrane Nafion 450.

  2. Effect of machining parameters on surface finish of Inconel 718 in end milling

    Directory of Open Access Journals (Sweden)

    Sarkar Bapi

    2017-01-01

    Full Text Available Surface finish is an important criteria in machining process and selection of proper machining parameters is important to obtain good surface finish. In the present work effects of the machining parameters in end milling of Inconel 718 were investigated. Central composite design was used to design the total number of experiments. A Mathematical model for surface roughness has been developed using response surface methodology. In this study, the influence of cutting parameters such as cutting speed, feed rate and depth of cut on surface roughness was analyzed. The study includes individual effect of cutting parameters on surface roughness as well as their interaction. The analysis of variance (ANOVA was employed to find the validity of the developed model. The results show that depth of cut mostly affected the surface roughness. It is also observed that surface roughness values are comparable in both dry and wet machining conditions.

  3. Presence of toxic metals and their effects in finished leather goods

    International Nuclear Information System (INIS)

    Rana, B.B.; Ehsan, A.M.

    2016-01-01

    This study examines the presence of heavy metals in different types of leather finished goods. Various leather items like gloves, shoe soles and leather pieces for jackets were tested using Atomic Absorption Spectrophotometry and their toxic effects in our environment are discussed. Cadmium, lead and chromium are the most common heavy metals present in leather finished goods and are a cause for concern. Many countries in Europe and America have banned or limited their use in leather processing. This study reveals that the levels of heavy metals in most of the leather goods manufactured by different companies in Pakistan are within permissible limits. However, in some of the samples tested in this study, the amounts of cadmium, lead and chromium are considerably high which requires special attention from all stakeholders to bring it down to acceptable level. Failing to do so will be detrimental for export of these leather goods to Europe and America. (author)

  4. Tribological impact of the finishing technology onto meso- and microforming processes

    Directory of Open Access Journals (Sweden)

    Jahn Stephan F.

    2016-01-01

    Full Text Available Tribological conditions between workpiece and tool have a major impact onto forming processes. Besides lubrication, temperature, and material, they are mainly influenced by the tool surface characteristics, especially by its topography, which is a result of finishing technology. Thereby formed lubricant pockets are of prime importance for the tribosystem due to its ability to separate the tribopartners by storing lubricant. The influence of four different tool finishing processes and their according surface topographies onto frictional behaviour have been investigated and quantified by the barrel compression test, in dry and lubricated tribosystems. The tool steel surfaces were stochastically microstructured by grinding and spark erosion as well as deterministic structured with micro calottes, applied by jet electrochemical machining and compared to a polished reference tool. The allocation of open and closed lubricant pockets over tool surfaces before and after the forming process was analysed by a self-made MATLAB tool.

  5. Eco-friendly finishing agent for cotton fabrics to improve flame retardant and antibacterial properties.

    Science.gov (United States)

    El-Shafei, A; ElShemy, M; Abou-Okeil, A

    2015-03-15

    This research work deals with flame retardant and antibacterial finishing agent for cellulosic fabrics using TiO2 nanoparticles and chitosan phosphate. TiO2 nanoparticles were prepared by sol-gel method using titanium tetraisopropoxide. The size of TiO2 nanoparticles was characterized using transmission electron microscope (TEM). The application of nano TiO2 onto cellulosic fabrics (cotton 100%) was achieved in presence of polycarboxylic acid [1,2,3,4-butane tetracarboxylic acid (BTCA)] with sodium hypophosphite (SHP) as catalyst and chitosan phosphate through conventional pad-dry-cure method. The effect of the finishing on the physical properties, flammability and antibacterial properties of cross-linked fabrics are investigated. Thermal gravimetric analysis (TGA) was employed to investigate the thermal decomposition behaviour of the treated samples. Limited oxygen indexes (LOI) of the treated cotton fabrics were investigated. The treated cotton fabric also reveals excellent antibacterial properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Effect of Finishing Time on Microleakage at the Composite-Repair Interface

    OpenAIRE

    Shafiei, Fereshteh; Berahman, Nazanin; Niazi, Elmira

    2016-01-01

    Background: Repair is a conservative treatment of defective composite restoration. Sealing the repair interface is a critical factor to achieve successful repaired restorations. Objective: The aim of this study was to evaluatethe effect of three finishing times on the microleakage at the composite-repair interface. Method: Eighty composite specimens (Z250) were made and aged for eight weeks in water. They were randomly divided into four groups. In the control group, repairing was done with no...

  7. Diversity of methanogens in the hindgut of grower and finisher pigs ...

    African Journals Online (AJOL)

    This study examined the diversity of the methanogens in the hindgut of two different weight groups of pigs and correlated it with the amount of digested organic carbon (OC) and various components of dietary fiber. Five grower (58.9 ± 1.15 kg) and five finisher (89.4 ± 0.85 kg) Duroc × Landrace × Large Yorkshire female pigs ...

  8. Plutonium Finishing Plant (PFP) Standards/Requirements Identification Document (S/RID)

    Energy Technology Data Exchange (ETDEWEB)

    Maddox, B.S.

    1996-01-01

    This Standards/Requirements Identification Document (S/RID) sets forth the Environmental Safety and Health (ESH) standards/requirements for the Plutonium Finishing Plant (PFP). This S/RID is applicable to the appropriate life cycle phases of design, construction, operation, and preparation for decommissioning. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

  9. Assessing Nitrogen and Phosphorus in Excreta from Grower-finisher Pigs Fed Prevalent Rations in Vietnam

    DEFF Research Database (Denmark)

    Van, Vu Thi Khanh; Sommer, Sven G.; Vu, C. C.

    2010-01-01

    , there is a loss of plant nutrients from livestock farms that causes environmental pollution. This study carried out a feed and excretion experiment measuring fecal characteristic, daily fecal production, daily nitrogen and phosphorous excretion from grower-finisher pigs fed prevalent rations in Vietnam...... farms. The study also showed that about 12% of nitrogen excreted was emitted during housing. Waste water contains more than half of the nitrogen excreted, mainly in ammonium form which has a high potential for gaseous emission....

  10. Plutonium Finishing Plant (PFP) Standards/Requirements Identification Document (S/RID)

    International Nuclear Information System (INIS)

    Maddox, B.S.

    1996-01-01

    This Standards/Requirements Identification Document (S/RID) sets forth the Environmental Safety and Health (ESH) standards/requirements for the Plutonium Finishing Plant (PFP). This S/RID is applicable to the appropriate life cycle phases of design, construction, operation, and preparation for decommissioning. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment

  11. Effect of supplementing finishing pigs with different sources of chromium on performance and meat quality

    OpenAIRE

    Peres, Louise Manha; Bridi, Ana Maria; Silva, Caio Abércio da; Andreo, Nayara; Barata, Cátia Chilanti Pinheiro; Dário, Julie Gabriela Nagi

    2014-01-01

    The objective was to evaluate the dietary supplementation of different sources of chromium (inorganic: chromium sulfate and chelated: chromium-methionine) during the finishing period of pigs to obtain improvements in the animal performance, and carcass and meat quality. The statistical design was randomized blocks, where 44 barrows, with an initial weight 60.49±5.12 kg, were divided into four blocks (heavier, heavy, light and lighter) according to initial weight. The experimental diets were i...

  12. Effects of dried and ensiled apple pomace from puree making on performance of finishing lambs.

    Science.gov (United States)

    Taasoli, G; Kafilzadeh, F

    2008-01-15

    This experiment was conducted to study the effect of ensiled and dried Apple Pomace (AP) obtained from puree making on finishing performance of lambs. Digestibilities of both ensiled and dried AP were determined using 4 mature sheep. In finishing experiment, 18 Sanjabi male lambs were used (9 per treatment) in a 120 day finishing experiment which was divided into two periods (60 day each). In the first period the ensiled AP and in the second period the dried AP were fed in an iso caloric, iso nitrogenous total mix ration. The Dry Matter (DM), crude protein and neutral detergent fiber of ensiled and dried AP were 247.1, 63.85, 386.4 g kg(-1) DM and 888.4, 51.2, 385.6 g kg(-1) DM, respectively. No significant difference was observed in the apparent digestibility of ensiled and dried AP. The apparent DM digestibilities of ensiled and dried AP were 704.3 and 668.2 g kg(-1) DM, respectively. Feeding ensiled AP significantly increased Dry Matter Intake (0.938 vs. 0.803 kg day(-1)), Average Daily Gain (ADG) (199.8 vs. 155.56 g) and Feed Conversion Ratio (FCR) (4.69 vs. 5.16). Use of dried AP had no significant effect on DMI (1.030 vs. 0.932 kg day(-1)) but significantly improved the ADG (192.3 vs. 123.82 g) and FCR (5.36 vs. 7.52). Apple pomace increased carcass dressing percentage but had no effect on the percentage of different cuts. Results of this study suggest that AP, in both ensiled and dried forms, can improve the performance of finishing lambs.

  13. Some blood indices in finisher broiler chickens fed cocoa pod husk ...

    African Journals Online (AJOL)

    The dietary effects of pre-treated cocoa pod husk (CPH) on some blood indices of 21-day old COBB-500 finisher broiler chicks were evaluated in a 35-day experiment with a completely randomized design. The birds were allotted to seven treatments (diets) having 0-g kg-1, 100- g kg-1, 200-g kg-1 and 300-g kg-1 of either ...

  14. Headspace Volumetric Karl Fischer Titration for the Determination of Water Content in Finished Tobacco Products

    OpenAIRE

    Aydin N; Chardonnens F; Rotach M

    2014-01-01

    Because many physicochemical properties of tobacco are highly sensitive to its moisture content, the determination of water level is an important parameter for tobacco characterization. A headspace volumetric Karl Fischer titration (HS-V-KFT) method is presented for the quantification of water content in different finished tobacco materials. The parameters affecting the extraction of water from the tobacco materials were the sample size and the oven temperature which have been optimized. The ...

  15. THE IMPACTS OF BIRD FAECES ON BOAT TEXTILES AND FINISHING COMPOSITION

    OpenAIRE

    Wandah, Lewis

    2010-01-01

    This thesis deals with the damage caused by bird faeces to boat textiles and finishing compositions. A survey was conducted to find out from boaters perspective if the bird faeces cause any damage on the boat textiles and the environment or not? Samples of bird faeces were collected from three strategic sites in Kokkola. They were classified using a gas and ion chromatographic techniques, and an atomic absorption spectrophotometer to determine the contaminants content. The detrimental aspects...

  16. Pose-varied multi-axis optical finishing systems theory and process validation

    CERN Document Server

    Cheng, Haobo

    2015-01-01

    This book focuses on advanced optical finishing techniques and design for high-performance manufacturing systems. It provides numerous detailed examples of how advanced automation techniques have been applied to optical fabrication processes. The simulations, removal rate and accurate experimental results offer useful resources for engineering practice. Researchers, engineers and graduate students working in optical engineering and precision manufacture engineering will benefit from this book.

  17. Atmospheric pressure plasma polymerization of 1,3-butadiene for hydrophobic finishing of textile substrates

    International Nuclear Information System (INIS)

    Samanta, Kartick K; Jassal, Manjeet; Agrawal, Ashwini K

    2010-01-01

    Atmospheric pressure plasma processing of textile has both ecological and economical advantages over the wet-chemical processing. However, reaction in atmospheric pressure plasma has important challenges to be overcome before it can be successfully used for finishing applications in textile. These challenges are (i) generating stable glow plasma in presence liquid/gaseous monomer, and (ii) keeping the generated radicals active in the presence of contaminants such as oxygen and air. In this study, a stable glow plasma was generated at atmospheric pressure in the mixture of gaseous reactive monomer-1,3-butadiene and He and was made to react with cellulosic textile substrate. After 12 min of plasma treatment, the hydrophilic surface of the cellulosic substrate turned into highly hydrophobic surface. The hydrophobic finish was found to be durable to soap washing. After soap washing, a water drop of 37 μl took around 250 s to get absorbed in the treated sample compared to 0 . Both top and bottom sides of the fabric showed similar hydrophobic results in terms of water absorbency and contact angle. The results may be attributed to chemical reaction of butadiene with the cellulosic textile substrate. The surface characterization of the plasma modified samples under SEM and AFM revealed modification of the surface under <100 nm. The results showed that atmospheric pressure plasma can be successfully used for carrying out reaction of 1,3-butadiene with cellulosic textile substrates for producing hydrophobic surface finish.

  18. Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

    Directory of Open Access Journals (Sweden)

    Jaecheol Ahn

    2015-05-01

    Full Text Available Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

  19. Project Management Plan to Maintain Safe and Compliant Conditions at the Plutonium Finishing Plant

    International Nuclear Information System (INIS)

    COX, G.J.

    1999-01-01

    This Project Management Plan presents the overall plan, description, mission, and workscope for the Plutonium Finishing Plant (PFP) maintain safe and compliant conditions project at PFP. This plan presents the overall description, mission, work scope, and planning for the Plutonium Finishing Plant (PFP) Maintain Safe and Compliant Conditions Project at PFP. This project includes all tasks required to maintain the safety boundary for the PFP Complex, except for the 2736-2 Vault Complex and the 234-52 vaults and vault-type rooms. The intent of this plan is to describe how this project will be managed and integrated with the stabilization, and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617, Rev. 0. This is the top-level definitive project management document that specifies the technical (work scope), schedule, and cost baselines that will manage the execution of this project. It describes the organizational approach and roles/responsibilities implemented to execute the project. This plan is under configuration management and any deviations must be authorized by appropriate change control action

  20. EFEK LAMA WAKTU PEMBATASAN PEMBERIAN PAKAN TERHADAP PERFORMANS AYAM PEDAGING FINISHER

    Directory of Open Access Journals (Sweden)

    Muharlien Muharlien

    2012-04-01

    Full Text Available ABSTRAK Tujuan penelitian untuk mengetahui pengaruh lama waktu pembatasan pemberian pakan terhadap performans atau penampilan  produksi ayam pedaging periode finisher. Hasil penelitian diharapkan dapat memberikan informasi tentang lama waktu pembatasan pakan untuk mendapatkan  efisiensi penggunaan pakan kepada masyarakat khususnya peternak  ayam pedaging .. Metode penelitian mengunakan metode percobaan, dengan Rancangan Acak Lengkap (RAL dengan perlakuan : tanpa pembatasan pemberian pakan (P0, 2 jam/hari pembatasan pemberian pakan (P1, 4 jam/hari pembatasan pemberian pakan (P2 dan 6 jam/hari pembatasan pemberian pakan (P3. Setiap perlakuan diulang 6 kali. Variabel yang diamati :  konsumsi pakan, pertambahan bobot badan dan konversi pakan. Data yang diperoleh dianalisis dengan sidik ragam dan bila terdapat perbedaan  yang nyata atau sangat nyata dilanjutkan  dengan uji beda nyata jujur (BNJ. Hasil penelitian menunjukkan pembatasan waktu pemberian pakan memberikan perbedaan pengaruh yang sangat nyata (P0.05 and significant effect (P<0.05 on feed conversion. The conclution was restricted feeding a long as 6 hours/day had lowest feed conversion (1.69.  Suggested on rearing finisher broiler could be restricted feeding time 6 hours/day for feed efficiency.   Keyword: finisher broiler, feed restriction , feed consumption, body weight gain, feed conversion

  1. Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis.

    Science.gov (United States)

    Pervez, Md Nahid; Shafiq, Faizan; Sarwar, Zahid; Jilani, Muhammad Munib; Cai, Yingjie

    2018-03-15

    In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L 27 orthogonal array was selected for five parameters and three levels by applying Taguchi's design of experiments. The Taguchi technique was coupled with a grey relational analysis to obtain a grey relational grade for evaluating multiple responses, i.e., crease recovery angle (CRA), tearing strength (TE), and whiteness index (WI). The optimum parameters (values) for resin finishing were the resin concentration (80 g·L -1 ), the polyethylene softener (40 g·L -1 ), the catalyst (25 g·L -1 ), the curing temperature (140 °C), and the curing time (2 min). The goodness-of-fit of the data was validated by an analysis of variance (ANOVA). The optimized sample was characterized by Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscope (SEM) to better understand the structural details of the resin finishing process. The results showed an improved thermal stability and confirmed the presence of well deposited of resin on the optimized fabric surface.

  2. Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis

    Directory of Open Access Journals (Sweden)

    Md. Nahid Pervez

    2018-03-01

    Full Text Available In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi’s design of experiments. The Taguchi technique was coupled with a grey relational analysis to obtain a grey relational grade for evaluating multiple responses, i.e., crease recovery angle (CRA, tearing strength (TE, and whiteness index (WI. The optimum parameters (values for resin finishing were the resin concentration (80 g·L−1, the polyethylene softener (40 g·L−1, the catalyst (25 g·L−1, the curing temperature (140 °C, and the curing time (2 min. The goodness-of-fit of the data was validated by an analysis of variance (ANOVA. The optimized sample was characterized by Fourier-transform infrared (FTIR spectroscopy, thermogravimetric analysis (TGA, and scanning electron microscope (SEM to better understand the structural details of the resin finishing process. The results showed an improved thermal stability and confirmed the presence of well deposited of resin on the optimized fabric surface.

  3. Surface finish in ultra-precision diamond turning of single-crystal silicon

    Science.gov (United States)

    Ayomoh, M.; Abou-El-Hossein, K.

    2015-10-01

    Silicon is an optical material widely used in the production of infrared optics. However, silicon as a brittle material exhibits some difficulties when ultra-precision machined by mono-crystalline single point diamond. Finish turning of silicon with mono- crystalline diamond inserts results in accelerated tool wear rates if the right combination of the machining parameters is not properly selected. In this study, we conducted a series of machining tests on an ultra-high precision machine tool using finish turning conditions when using mono-crystalline diamond inserts with negative rake angle and relatively big nose radius. The study yields some recommendations on the best combination of machining parameters that will result in maximum material removal rates with smallest possible surface finish. In this work, standard non-controlled waviness diamond inserts having nose radius of about 1.5 mm, rake angle of negative 25°, and clearance angle of 5° were used to produce flat surfaces on silicon disk. From the results, it has been established that feed rate has the most influential effect followed by the depth of cut and cutting speed.

  4. finishing pigs

    African Journals Online (AJOL)

    SHEENA

    2017-09-14

    Sep 14, 2017 ... 47. 2004, 2001; Zuo et al., 2015). Recently, standalone proteases have been available commercially and have shown beneficial effects on nutrient digestiblity and growth performance of pigs (Adeola & Cowieson, 2011;. Guggenbuhl et al., 2012; Mc Alpine et al., 2012a; O'Doherty & Forde, 1999; Zuo et al., ...

  5. Performance and carcass characteristics of finishing beef cattle managed in a bedded hoop-barn system.

    Science.gov (United States)

    Honeyman, M S; Busby, W D; Lonergan, S M; Johnson, A K; Maxwell, D L; Harmon, J D; Shouse, S C

    2010-08-01

    The use of bedded hoop barns in finishing systems for beef cattle has not been widely researched. In this management system, beef cattle are confined to hoop barns throughout finishing, and bedding is used to absorb animal waste, which results in minimal effluent. The objective of this study was to compare the performance and carcass characteristics of finishing beef steers (n = 1,428) managed in a bedded hoop-barn management system vs. an open-feedlot system with shelter. Six feeding trials were conducted over a 3-yr period. Three trials were conducted during summer-fall and 3 trials were conducted during winter-spring. Crossbred steers were allotted to 3 pens in the hoop-barn system and to 3 pens in the open-lot system (approximately 40 steers per pen in both facility systems). Stocking densities for the steers were 4.65 m(2) per steer in the hoop-barn system and 14.7 m(2) per steer in the open-lot system. The steers were begun on trial weighing 410 and 411 kg (SD = 21), were fed for 102.3 and 103.0 d (SD = 3.8), and were weighed off test at 595 and 602 kg (SD = 21) for the hoop-barn and open-lot systems, respectively. Steer performance measures consisted of ADG, DMI, and G:F. Carcass characteristics were HCW, fat thickness, LM area, KPH percentage, marbling score, USDA yield grade, and USDA quality grade. No year, season, or pen (management system) main effects, or season x management system and year x management system interactions were observed for any of the items measured related to cattle performance or carcass characteristics (P > 0.05). Final mud scores (a subjective evaluation of the amount of soil and manure adhering to the hair coat of the animals) were greater for the steers from the open-lot system compared with those from the hoop-barn system (P winter-spring. The performance of finishing cattle managed in a hoop-barn system was not different from the performance of cattle managed in an open-feedlot system with shelter during summer and winter

  6. Influence of the quality of the finished occlusion on postretention occlusal relapse.

    Science.gov (United States)

    de Freitas, Karina Maria Salvatore; Janson, Guilherme; de Freitas, Marcos Roberto; Pinzan, Arnaldo; Henriques, José Fernando Castanha; Pinzan-Vercelino, Célia Regina Maio

    2007-10-01

    In this study, we aimed to evaluate the influence of the quality of the finished occlusion on postretention occlusal stability. The sample comprised 87 patients with Class I malocclusion, treated with extraction of the 4 first premolars and edgewise mechanics; they were divided into 2 groups, according to the quality of their finished occlusions. Group 1 included 44 subjects (23 boys, 21 girls) with posttreatment peer assessment rating (PAR) scores from 0 to 5. The mean pretreatment age was 13.74 years (SD 2.14). The mean treatment time was 1.92 years (SD 0.57), the mean retention time was 1.75 years (SD 0.96), and the mean time of posttreatment evaluation was 5.17 years (SD 1.82). Group 2 included 43 subjects (22 boys, 21 girls) with posttreatment PAR scores greater than 5. The mean initial age was 13.34 years (SD 1.35). The mean treatment time was 2.20 years (SD 0.66), the mean retention time was 1.77 years (SD 0.78), and the mean posttreatment evaluation was 5.47 years (SD 1.60). The PAR and the Little irregularity indexes were measured on the dental casts at pretreatment, posttreatment, and postretention. Intergroup comparisons were made with independent t tests, and the Pearson correlation coefficient was applied to the PAR score for the whole sample at the times evaluated. Well-finished patients had lower posttreatment and postretention PAR scores and greater changes during the treatment and posttreatment periods than did the poorly finished patients. For the Little irregularity index, the only difference between the groups was at the posttreatment stage; group 1 had a smaller irregularity score than group 2. The correlation coefficients showed that the greater the treatment changes, the smaller the posttreatment PAR score and the greater the relapse. But the higher the posttreatment PAR score, the higher the postretention PAR score. It was concluded that the greater the quality of the orthodontic finished occlusion, the greater are the treatment changes and

  7. Effect of Lysine to Digestible Energy Ratio on Growth Performance and Carcass Characteristics in Finishing Pigs

    Directory of Open Access Journals (Sweden)

    S. B. Cho

    2012-11-01

    Full Text Available This experiment was performed to investigate the effects of lysine (Lys to DE ratio on growth performance, and carcass characterics in finishing barrows. Ninety six cross-bred finishing barrows ((Landrace×Yorkshire ×Duroc, average BW 58.25±0.48 kg were assigned as a randomized complete block design by 2 energy levels and 4 Lys:DE ratios on the basis of BW to one of 8 treatments with 3 replications with 4 animals per pen. The levels of DE and Lys:DE ratio for each treatment were i DE 3.35 Mcal/kg, 1.5 g Lys/Mcal DE, ii DE 3.35 Mcal/kg, 1.8 g Lys/Mcal DE, iii DE 3.35 Mcal/kg, 2.1 g Lys/Mcal DE, iv DE 3.35 Mcal/kg, 2.4 g Lys/Mcal DE, v DE 3.60 Mcal/kg, 1.5 g Lys/Mcal DE, vi DE 3.60 Mcal/kg, 1.8 g Lys/Mcal DE, vii DE 3.60 Mcal/kg, 2.1 g Lys/Mcal DE, viii DE 3.60 Mcal/kg, 2.4 g Lys/Mcal DE. During finishing period from 58 kg to 103 kg of BW, increased energy density in the diet increased (p<0.05 ADG and gain:feed ratio, but did not influence ADFI. As Lys:DE ratio was increased, ADG, ADFI and gain:feed ratio were improved in finishing barrows (p<0.05. There were positive interactions (p<0.05 between carcass weight, grade, and backfat thickness and energy density and Lys level (p<0.05. In conclusion, data from our current study suggest that maximum yields including ADG, gain:feed ratio, carcass weight and grade can be achieved by administrating finishing pigs with an ideal Lys:DE ratio, Lys 2.1 g/DE Mcal.

  8. High Throughput Plasmid Sequencing with Illumina and CLC Bio (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)

    Energy Technology Data Exchange (ETDEWEB)

    Athavale, Ajay

    2012-06-01

    Ajay Athavale (Monsanto) presents "High Throughput Plasmid Sequencing with Illumina and CLC Bio" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

  9. Machining the Integral Impeller and Blisk of Aero-Engines: A Review of Surface Finishing and Strengthening Technologies

    Science.gov (United States)

    Fu, Youzhi; Gao, Hang; Wang, Xuanping; Guo, Dongming

    2017-05-01

    The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has significant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and integrated finishing and strengthening technologies and discusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.

  10. Effect of Finish Rolling Temperature on the Microstructure and Tensile Properties of Nb–Ti Microalloyed X90 Pipeline Steel

    Directory of Open Access Journals (Sweden)

    Bin Guo

    2016-12-01

    Full Text Available The relationship between microstructure and tensile properties of an Nb–Ti microalloyed X90 pipeline steel was studied as a function of finish rolling temperature using a Gleeble 3500 simulator, an optical and scanning electron microscope, electron back scattered diffraction (EBSD, a transmission electron microscope (TEM and X-ray diffraction. The results indicate that the microstructure is primarily composed of non-equiaxed ferrite with martensite/austenite (M/A constituent dispersed at grain boundaries for the specimens with different finish rolling temperatures. With a decrease in the finish rolling temperature, the yield strength increases, following a significant increase in the grain refinement strengthening contribution and dislocation strengthening contribution, although the precipitation strengthening contribution decreases. The increasing yield ratio (YR shows that the strain hardening capacity declines as a result of the microstructure evolution when decreasing the finish rolling temperature.

  11. [Comparison of different finishing methods for composites and compomers. Profilometric analysis].

    Science.gov (United States)

    Rapisarda, E; Bonaccorso, A; Tripi, T R; Torrisi, L

    1999-05-01

    Reconstructions with aesthetical materials neither finished nor polished can be extremely irregular and wrinkled. For this reason they represent an ideal basis for the growing of pigmentation which come from food remainings and the nestle of bacteria on the plaque. The finishing of aesthetical materials is a fundamental step in conservative dentistry. The finishing session regarding the aesthetical restorations should be considered and planned at the moment of their insertion in the prepared hollows. The finishing should not be considered an option, but the conclusion of all the conservative treatment. Purpose of the search is to examine and assess, through a technical equipment measuring the superficial wrinkledness of the materials, the action of 4 systems of finishing and polishing on two aesthetical materials widely used in the daily practice by dental surgeons: a compomer (Compoglass, Vivadent) and a composite (Spectrum, Dentsply). For each of these two materials some little slabs model have been prepared, choosing the universal colour in the colorimetric scale. The two types of filling materials have been compared with 4 systems of finishing and polishing: Sof-Lex Pop-on (3M), Enhance system (Dentsply), Hawe Micro Disc (Howe Neos), Heawe Gommini Polisher (Heawe Neos). The total working time did not overcome 1 minute. The little slabs have been obtained, pressing the resin between two slides used in microscopy. In the hope to guarantee in the different samples, a uniform thickness, we have used a technical device. On each covering slide we have put a weight of 0.5 kg for 5 minutes. The thickness of the little slabs obtained was 2 mm. Thus, pressed between the two slides, the aesthetical material has been photopolymerized according to the time suggested by Manufacturing Industries. The sizes concerning the wrinkledness of samples subjected to different treatments have been carried out using a pointed profilometer with high sensitivity. (Tencor-P10). This

  12. The effect of surface finishes on outdoor granite and limestone pavers

    Directory of Open Access Journals (Sweden)

    Martínez-Martínez, J.

    2008-06-01

    Full Text Available Two types of ornamental stones, namely granite (Blanco Rafaela or Zarzalejo Granite and microcrystalline limestone (marble known commercially as Gris Pulpis, treated for different surface finishes, were tested for suitability as paving slabs. The finishes tested in both stones were polishing, hammering, honing and flaming, while acid treatment and abrasion were applied to limestone only and sawn finishes were only studied in granite.The stones were tested for the three physical properties that determine suitability for use as paving slabs; flexural strength under a concentrated load, and abrasion and slip resistance. Laboratory freeze-thaw cycle ageing tests were also conducted and flexural strength subsequently evaluated. Stone water sorption proved to be substantially unaltered by the type of finish employed. Finish barely affected flexural strength, except in the case of limestone flaming, where it was lower. Hammering was found to provide good slip resistance in both stones. The best slip performance for granite, however, was found for flamed specimens. Finish was shown to have no effect on abrasion resistance in either of the stone materials. Polished limestone suffered the least damage in freeze-thaw cycles, whereas freeze-thaw resistance was similar in all the granite specimens, regardless of the finish used.Se han estudiado, para su utilización como baldosas de pavimentos, granito (Blanco Rafaela o Granito de Zarzalejo y caliza microcristalina (mármol comercial Gris Pulpis con diferentes acabados. Estos acabados son: pulido, apomazado, abujardado y flameado en ambas rocas y además acabado al ácido y amolado en la caliza. Se han determinado mediante ensayos estandarizados las tres propiedades físicas de mayor interés para el uso de la piedra natural como baldosa en pavimentos de exteriores: resistencia a la flexión bajo carga concentrada, a la abrasión y al deslizamiento. Se han realizado ensayos de durabilidad por ciclos de hielo

  13. Effect of finishing and polishing on the color stability of a composite resin immersed in staining solutions

    Directory of Open Access Journals (Sweden)

    Maiara Justo Polli

    2015-01-01

    Full Text Available Objective: To evaluate the influence of finishing/polishing methods and staining solutions using different immersion periods on the color stability of a microhybrid composite resin. Materials and Methods: Ninety specimens were fabricated using a stainless steel mold and polyester strips. The samples were randomly divided into five groups according to the finishing and polishing performed: Control group (no surface treatment was performed, Diamond Pro group, Diamond burs group, Enhance group, and SiC paper group. After finishing and polishing, six samples from each group were immersed in coffee, red wine, or water for 30 days. The color measurements were obtained using digital photography before immersion and after 7, 15, and 30 days of immersion. The red, green, and blue values provided by the Adobe Photoshop software were converted into CIELab values. A three-way analysis of variance and Tukey's test were used for statistical analysis (P ≤ 0.05. Results: The finishing and polishing methods, staining solutions, immersion times, and their interaction had statistically significant effects on the color change (P = 0.00. Coffee and red wine caused intense staining. Among the polishing methods, the highest color change value was observed in the control group (P < 0.05 and the Diamond Pro disks provided the most stain-resistant surfaces (P ≤ 0.05. Conclusion: The finishing and polishing method, staining solution, and immersion time influences the color stability. Finishing and polishing should be applied to obtain a more stain-resistant surface.

  14. MICROSCOPY, MICRO-CHEMISTRY AND FTIR AS ANALYTICAL TOOLS FOR IDENTIFYING TRANSPARENT FINISHES CASE STUDIES FROM ASTRA MUSEUM – SIBIU

    Directory of Open Access Journals (Sweden)

    Maria Cristina TIMAR

    2015-12-01

    Full Text Available Conservation of cultural heritage relies on scientific investigation of artefacts, a key point being identification of the original materials. In this context, besides wood species identification, investigation of finishing layers is of ultimate importance for old furniture and any other wooden objects with historic, documentary or artistic value. The present paper refers to a series of micro-destructive investigation methods applied for identification of finishing materials, namely: simple in situ and laboratory physical tests, optical microscopy, micro-chemistry and FTIR – ATR analysis. Small samples of finishing layers were taken from four furniture objects belonging to CNM ASTRA Sibiu and were analysed according to the usual procedures of the laboratories from Sibiu and Brasov. The results showed that physical tests and microscopy are useful to get basic information on the samples’ morphology and possible classes of coating materials, while micro-chemistry revealed by some successive tests more specific information on the type of finishing materials. FTIR - ATR is a rapid method of identifying the coating materials based on available reference samples or spectra. However, this is not always straightforward and preliminary physical tests of solubility are useful to select the adequate references, while micro-chemistry tests could complete the FTIR result, especially for those components of the finishing layer present in very small amounts (less than 5%, bellow the FTIR sensitivity. Corroboration of microscopy, physical and micro-chemistry tests with FTIR can provide more reliable results in terms of finishes identification and also valuable information for restoration.

  15. The Effect of Finishing and Polishing Techniques on the Surface Roughness and the Color of Nanocomposite Resin Restorative Materials.

    Science.gov (United States)

    Avsar, Aysun; Yuzbasioglu, Emir; Sarac, Duygu

    2015-01-01

    Rough, poorly polished surfaces contribute to staining, plaque accumulation, gingival irritation and recurrent caries. Finishing and polishing techniques are critical factors contributing to the longevity of the direct composite resin restorations. The aim of this in vitro study was to evaluate the effects of finishing and polishing systems on surface roughness of six nanocomposite restorative resins. Thirty specimens of each restorative material (n=180) were placed in a teflon mould (6 mm in diameter and 3 mm in depth) and cured with a LED curing unit. Six specimens from each of restorative material were randomly assigned to four groups for finishing and polishing (carbide burs, diamond burs, aluminium oxide discs, silicon rubber polisher) techniques. Mylar strip formed specimens were served as control group. After finishing and polishing procedures surface roughness was evaluated by a profilometer. The data was analyzed by 2-way analysis of variance and the Tukey HSD test (α=0.05). Significant differences were found between the groups in terms roughness (prestorative materials. Although mylar matrix strip formed surfaces presents lower surface roughness values, recountouring and polishing of resin restorations are often required in clinical situations. Aluminium oxide discs and carbide finishing burs are suitable for finishing and polishing procedures for nanocomposite restorative resins.

  16. Surface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing

    Directory of Open Access Journals (Sweden)

    Fernanda Carvalho Rezende Lins

    2016-01-01

    Full Text Available Objective. This study evaluated the effect of immediate or delayed finishing/polishing using different systems on the surface roughness, hardness, and microleakage of a silorane-based composite. Material and Methods. Specimens were made with silorane-based composite (Filtek P90, 3M ESPE and assigned to the treatments: control (light-cured; aluminum oxide discs (Sof-Lex, 3M ESPE; diamond-impregnated silicone tips (Astropol, Ivoclar Vivadent; aluminum oxide-impregnated silicone tips (Enhance, Dentsply. Half of the specimens were finished/polished immediately and the rest after 7 days. Surface roughness (Ra, μm; n=20 and Vickers microhardness (50 g; 45 s; n=10 were measured. Cavities were prepared in bovine incisors and filled with Filtek P90. The fillings received immediate or delayed finishing/polishing (n=10 and were subjected to dye penetration test (0.5% basic fuchsin, 24 h. Data were analyzed by ANOVA and Scheffe, Kruskal-Wallis, and Mann-Whitney tests (p<0.05. Results. The finishing/polishing system significantly influenced roughness and microhardness (p<0.0001. For enamel, microleakage was not affected by the finishing/polishing system (p=0.309. For dentin, Sof-Lex discs and Astropol points promoted greater microleakage than Enhance points (p=0.033. Conclusion. Considering roughness, microhardness, and microleakage together, immediate finishing/polishing of a silorane-based composite using aluminum oxide discs may be recommended.

  17. Increase in finishers and improvement of performance of masters runners in the Marathon des Sables

    Directory of Open Access Journals (Sweden)

    Jampen SC

    2013-06-01

    Full Text Available Saskia Carolin Jampen,1 Beat Knechtle,1,2 Christoph Alexander Rüst,1 Romuald Lepers,3 Thomas Rosemann11Institute of General Practice and for Health Services Research, University of Zurich, Zurich, Switzerland; 2Gesundheitszentrum St Gallen, St Gallen, Switzerland; 3INSERM U1093, Faculty of Sport Sciences, University of Burgundy, Dijon, FranceAim: The aim of the study was to examine finisher and performance trends of ultrarunners in the Marathon des Sables, the world's largest multistage ultramarathon.Methods: The age and running speed was analyzed for 6945 finishes of 909 women and 6036 men between 2003 and 2012 at the Marathon des Sables covering about 240 km in the Moroccan desert.Results: The number of finishes increased significantly for both women and men from 2003–2012. The annual number of finishes increased in age groups: 30–34 years (r2 = 0.50; P = 0.021, 45–49 years (r2 = 0.81; P = 0.0004, and 50–54 years (r2 = 0.46; P = 0.029 for women and in all age groups older than 35 years for men (35–39 years: r2 = 0.64, P = 0.0054; 40–44 years: r2 = 0.67, P = 0.0036; 45–49 years: r2 = 0.77, P = 0.0007; 50–54 years: r2 = 0.72, P = 0.0018; 55–59 years: r2 = 0.42, P = 0.041; and 60–64 years: r2 = 0.67, P = 0.0038. The fastest running speed was achieved by runners in the age group of 35–39 years for both sexes. The mean age of overall finishers was 41.0 ± 9.1 years for women and 41.3 ± 9.5 years for men. For men, running speed improved for athletes in the age group of 35–39 years (r2 = 0.44; P = 0.036 and of 40–44 years (r2 = 0.51; P = 0.019, while it decreased for athletes in the age group of 30–34 years (r2 = 0.66, P = 0.0039. For women, running speed remained stable during the study period for athletes in all age groups.Conclusion: These data suggest that the number of finishers of masters runners older than 40 years increased for both sexes at the Marathon des Sables, as has been previously observed for single

  18. Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crowns.

    Science.gov (United States)

    Cho, LeeRa; Choi, JongMi; Yi, Yang Jin; Park, Chan Jin

    2004-06-01

    Ceramic optimized polymer (Ceromer)/fiber-reinforced composite (FRC) crowns have been promoted as alternatives to conventional crowns. However, little is known regarding the ideal tooth preparation for this type of crown. This in vitro study evaluated the marginal adaptation and fracture strength of ceromer/FRC crowns with respect to the various types of finish lines. Four metal dies with different finish lines (0.9-mm chamfer, 1.2-mm chamfer, 1.2-mm rounded shoulder, and 1.2-mm shoulder) were prepared. Forty (10 for each finish line) Targis/Vectris crowns were fabricated on duplicated base metal alloy dies. The restorations were stereoscopically evaluated at 56 points along the entire circumferential margin for measuring the margin adaptation before and after cementation with a resin luting agent. The specimens were then compressively loaded to failure using a universal testing machine. The marginal adaptation (microm) was analyzed with the Kruskal-Wallis test and post-hoc Dunnett test (alpha=.05). The fracture load (N) was analyzed with a 1-way analysis of the variance and the Scheffe adjustment (alpha=.05). The fractured surfaces of the crowns were examined with a scanning electron microscope to determine the mode of fracture. The marginal adaptation of crowns with a shoulder finish line was significantly better than crowns with a chamfer finish line before and after cementation (P<.001). The increased marginal gap after cementation was the lowest in the 1.2-mm rounded shoulder group. The fracture strength of the crowns with the 0.9-mm chamfer and crowns with 1.2-mm chamfer was significantly greater than those of the crowns with the 1.2-mm shoulder or rounded shoulder (P=.011, P=.049, respectively). The mean fracture load of all crowns, regardless of the finish line design, was 1646 N. The fractured surface of the crown revealed adhesive failure and 3 types of cohesive failure (fracture of the Targis and Vectris, Targis fracture with a crack in the Vectris layer

  19. TUNG OIL AND LINSEED OIL AS TRADITIONAL FINISHING MATERIALS IMPORTANT FOR FURNITURE CONSERVATION

    Directory of Open Access Journals (Sweden)

    Xin You LIU

    2015-12-01

    Full Text Available Tung oil and linseed oil are two representative traditional drying oils wich were commonly employed, for centuries, for wood finishing. Therefore, their study in terms of properties, chemical structure features and alterations by ageing is important for furniture conservation. This paper focusses on some comparative properties of Tung oil and linseed oil as wood finishing materials. For this purpose, test wooden samples of Chinese walnut (Juglans mandshurica Maxim. were coated with these materials by manual traditional techniques. Solids content of the oils was determined in order to approximate the thickness of the resulting film. The colour change brought about by coating of wood surfaces with these oils was measured in the CIELab system. Furthermore, an accelerated artificial ageing test under the action of temperature (100°C was performed in order to evaluate and compare the ageing resistance of the two types of oils. Ageing phenomena were investigated by colour measurements and FTIR - ATR spectrometry. Both uncoated and oils coated wood surfaces suffered colour changes observed as darkening and colour shade shifting to red and yellow, but these were obviously more evident for the oil coated samples. The overal colour changes were maximum for the samples finished with linseed oil, while tung oil semmed to be more resistant. FTIR investigations for two types of oils highlighted similarities and differences in their chemical composition, curing and aspects of the thermally induced ageing mechanism. The later proved to be mainly an oxidative degradation process leading to formation of free fatty acids and other carbonyl containing compounds, as suggested by the broader carbonyl (1740 cm-1 and hydroxyl bands (3400 cm-1 .

  20. Transport losses in finisher pigs: impact of transport distance and season of the year

    Directory of Open Access Journals (Sweden)

    Eva Voslarova

    2017-01-01

    Full Text Available Objective The death of animals during transport for slaughter is a major factor indicating the level of welfare in transported animals. The aim of this study was to assess mortality related to the commercial transport of finisher pigs for slaughter in the Czech Republic. Methods The inspectors of the State Veterinary Administration of the Czech Republic recorded the numbers of finisher pigs transported to processing plants in the Czech Republic for slaughter and the mortality in these pigs in relation to transport in the period from 2009 to 2014. Results Our results show that the likelihood of death losses in transported pigs increases with increasing transport distance. The transport-related mortality ranged from 0.049% in pigs transported for distances below 50 km to 0.145% in pigs transported for distances exceeding 300 km. The impact of external air temperature on the transport-related mortality found in our study clearly shows that current transport practices fail to ensure the welfare of pigs transported under other than moderate weather. Particularly cold temperatures below −2°C were associated with increased death losses in winter transport. Conclusion Despite a decreasing trend in the mortality of finisher pigs transported for slaughter in Europe, our study suggests that current transport conditions are not efficient at ensuring the welfare of pigs during transport for longer distances and the protection of pigs against the negative impact of extreme ambient temperatures. Further research should focus on developing practical guidelines to improve the welfare of pigs in transit accordingly.

  1. Descriptive study of production factors affecting performance traits in growing-finishing pigs in Spain

    Directory of Open Access Journals (Sweden)

    P. S. Agostini

    2013-04-01

    Full Text Available The objective of this study was to build up a data set including productive performance and production factors data of growing-finishing (GF pigs in Spain in order to perform a representative and reliable description of the traits of Spanish growing-finishing pig industry. Data from 764 batches from 452 farms belonging to nine companies (1,157,212 pigs were collected between 2008 and 2010 through a survey including five parts: general, facilities, feeding, health status and performance. Most studied farms had only GF pigs on their facilities (94.7%, produced ‘industrial’ pigs (86.7%, had entire male and female (59.5% and Pietrain-sired pigs (70.0%, housed between 13-20 pigs per pen (87.2%, had  50% of slatted floor (70%, single-space dry feeder (54.0%, nipple drinker (88.7% and automatic ventilation systems (71.2%. A 75.0% of the farms used three feeding phases using mainly pelleted diets (91.0%, 61.3% performed three or more antibiotic treatments and 36.5% obtained water from the public supply. Continuous variables studied had the following average values: number of pigs placed per batch, 1,515 pigs; initial and final body weight, 19.0 and 108 kg; length of GF period, 136 days; culling rate, 1.4%; barn occupation, 99.7%; feed intake per pig and fattening cycle, 244 kg; daily gain, 0.657 kg; feed conversion ratio, 2.77 kg kg-1 and mortality rate, 4.3%. Data reflecting the practical situation of the Spanish growing and finishing pig production and it may contribute to develop new strategies in order to improve the productive and economic efficiency of GF pig units.

  2. Anatomopathological pneumonic aspects associated with highly pathogenic Pasteurella multocida in finishing pigs

    Directory of Open Access Journals (Sweden)

    Eliana S. Paladino

    Full Text Available ABSTRACT: The bacterium Pasteurella multocida is a frequent cause of porcine respiratory disease complex in finishing pigs. Historically, the bacterium is recognized as an opportunistic agent, causing secondary bacterial pneumonia in pigs. Several Brazilian reports have suggested the ability of P. multocida to cause primary pulmonary infection that leads to the death of finishing pigs prior to slaughter. The aim of this study was to evaluate anatomopathological pulmonary findings associated with P. multocida infection that were obtained from animals with clinical respiratory disease and from animals at slaughter. Twenty-five lung samples from 14 herds of finishing pigs with acute clinical respiratory disease and 19 lungs collected at slaughter from a different set of 14 herds were studied. In all lung samples, bacterial isolation was performed, and only samples with pure P. multocida growth were included in the study. Gross and histopathological lesions were evaluated, as well as Influenza A, porcine circovirus type 2 (PCV2 and Mycoplasma hyopneumoniae co-infections. Pleuritis and pericarditis were more often observed in clinical samples (P<0.05. Moreover, there was a numerical trend indicating that pericarditis, lymphadenomegaly and cavity exudates were more often present in clinical samples. Thirteen lung samples were negative to M. hyopneumoniae, Influenza A and PCV2 by immunohistochemistry (IHC, with only P. multocida identified. In these cases, gross lesions such as pleuritis, pericarditis and lymphadenomegaly were always present, and no histologic lesions indicative of other agents such as Actinobacillus pleuropneumoniae, Actinobacillus suis or Haemophilus parasuis were observed. These findings suggest the ability of some P. multocida isolates to cause primary respiratory and systemic infection. However, in this study, it was not possible to determine specific virulence markers to explain these findings.

  3. Fabrication of high precision metallic freeform mirrors with magnetorheological finishing (MRF)

    Science.gov (United States)

    Beier, Matthias; Scheiding, Sebastian; Gebhardt, Andreas; Loose, Roman; Risse, Stefan; Eberhardt, Ramona; Tünnermann, Andreas

    2013-09-01

    The fabrication of complex shaped metal mirrors for optical imaging is a classical application area of diamond machining techniques. Aspherical and freeform shaped optical components up to several 100 mm in diameter can be manufactured with high precision in an acceptable amount of time. However, applications are naturally limited to the infrared spectral region due to scatter losses for shorter wavelengths as a result of the remaining periodic diamond turning structure. Achieving diffraction limited performance in the visible spectrum demands for the application of additional polishing steps. Magnetorheological Finishing (MRF) is a powerful tool to improve figure and finish of complex shaped optics at the same time in a single processing step. The application of MRF as a figuring tool for precise metal mirrors is a nontrivial task since the technology was primarily developed for figuring and finishing a variety of other optical materials, such as glasses or glass ceramics. In the presented work, MRF is used as a figuring tool for diamond turned aluminum lightweight mirrors with electroless nickel plating. It is applied as a direct follow-up process after diamond machining of the mirrors. A high precision measurement setup, composed of an interferometer and an advanced Computer Generated Hologram with additional alignment features, allows for precise metrology of the freeform shaped optics in short measuring cycles. Shape deviations less than 150 nm PV / 20 nm rms are achieved reliably for freeform mirrors with apertures of more than 300 mm. Characterization of removable and induced spatial frequencies is carried out by investigating the Power Spectral Density.

  4. Dental preparation with sonic vs high-speed finishing: analysis of microleakage in bonded veneer restorations.

    Science.gov (United States)

    Faus-Matoses, Ignacio; Solá-Ruiz, Fernanda

    2014-02-01

    To compare marginal microleakage in porcelain veneer restorations following dental finishing using two types of instruments to test the hypothesis that microleakage will be less when teeth are prepared with sonic oscillating burs than when prepared with high-speed rotating burs. Fifty-six extracted human maxillary central incisors were selected and divided randomly into two groups. Group 1 samples underwent dental finishing using high-speed rotating diamond burs, while group 2 used sonic oscillating diamond burs. Buccal chamfer preparation was carried out for both groups. Forty eight of the samples (24 per group) were restored using IPS Empress ceramic veneers. 2% methylene blue was used to evaluate microleakage at the tooth/composite veneer interface. Teeth were sectioned lengthwise into three parts and microleakage was measured at two points - cervical and incisal - on each section. Before bonding, four teeth per group underwent SEM examination. Evaluation of microleakage at the cervical dentin margin showed a value of 10.5% in group 1 and 6.6% in group 2, which was statistically significantly different (p microleakage was 1.3% for group 1 and 1.2% for group 2, which was not significantly different. SEM revealed different patterns of surface texture in both areas according to the instrument used. Group 1 exhibited parallel horizontal abrasion grooves with a milled effect and thick smear layers; group 2 showed abrasive erosion, discontinuous perpendicular depressions, and thin smear layers. Tooth preparations finished with sonic burs produced significantly less microleakage in the cervical dentin area of bonded veneer restorations. No differences were found in the incisal enamel area.

  5. Finishing and polishing of the ceromer material Targis. Lab-side and chair-side methods.

    Science.gov (United States)

    Behr, M; Rosentritt, M; Leibrock, A; Schneider-Feyrer, S; Handel, G

    1999-01-01

    The aim of the study was to check four lab-side and four chair-side methods for finishing and polishing the ceromer material Targis. Eighty bar-shaped specimens (20 mm x 10 mm x 2 mm) of Vectris were produced; 72 were covered with a 2 mm (thickness) layer of the Ceromer Targis and eight samples with the composite Tetric. All specimens were ground plane parallel with 320 Silicium carbide grit sandpaper in order to start with the same level of roughness. Then the specimens were finished and polished using the following methods: (1) Artglass toolkit, (2) pumice-stone and brushes/linen brush and polishing paste P3, (3) Robinson brush/Ivoclar Universal paste and wool brush, (4) Silicone wheel and rag wheel, (5) Shofu Rainbow set, (6) Sof-Lex discs, (7) Vivadent Politip set and (8) Nupro-pastes and brushes. The surface roughness was determined with a profilometer. The arithmetical roughness value Ra was calculated. From each group one specimen was randomly chosen and sputtered with gold in order to observe the surface with a scanning electron microscope to evaluate its smoothness. The methods were ranked as followed: 2, 3 and 5 with the lowest roughness, then 8, 6, 7, 4, 1. The best ranked chair-side method (5) and the best ranked lab-side methods (2, 3) did not differ significantly between the Ra values. No difference was observed between the composite Tetric and the ceromer Targis when these materials were polished using the same method. the lab-side-methods 2 and 3 and the chair-side-method 5 can be recommended for finishing and polishing the new ceromer material Targis.

  6. EVALUATION OF SURFACE CONDITION AFTER FINISHING AND POLISHING OF A FLOWABLE COMPOSITE MATERIAL

    Directory of Open Access Journals (Sweden)

    Bogdan MUNTEANU

    2016-06-01

    Full Text Available The aim of the study was to evaluate the surface condition, after finishing and polishing with 3 different systems, of a flowable composite material, starting from the microstructure experimentally analyzed by atomic force microscopy. Materials and method. The material tested in the present study was Filtek Ultimate Flowable Restorative (3M ESPE composite. 20 cylindrical samples, 5 mm in diameter and 2 mm thick, were prepared by using metallic molds. The samples were randomly divided into 4 groups: a group containing 5 control samples, not subjected to finishing and 3 groups formed, each, of 5 samples for each of the three finishing and polishing systems, respectively system 1: the two-step Sof-Lex (3M ESPE, system 2: multistep Super Snap (Shofu, Inc. Kyoto, Japan and system 3: multi-step OptiDisc (KerrHawe SA, Switzerland. The surfaces of the samples were analyzed by atomic force microscopy. For quantitative evaluations, the rugosity parameter (Ra, and the mean deviation of the determined profile were calculated. Results. All 3 polishing systems determined an increase of the Ra parameter, comparatively with the control samples; the highest mean Ra value, of 1.19 µm, was recorded for system 3, followed by system 2 (mean Ra value = 1.12 µm, while the lowest mean value, of 1.10 µm, was registered for system 1. Conclusions. All three systems under investigation induced increased rugosity on the surfaces of the samples prepared from the Filtek Ultimate Flowable Restorative (3M ESPE composite resin. The most abrasive system appears to be OptiDisc (KerrHawe SA, Switzerland, followed by the Super Snap (Shofu, Inc. Kyoto, Japan system, the one recording the lowest abrasion being SofLex (3M ESPE.

  7. Ractopamine as a metabolic modifier feed additive for finishing pigs: a review

    Directory of Open Access Journals (Sweden)

    Vivian Vezzoni de Almeida

    2012-06-01

    Full Text Available The β-adrenergic agonist ractopamine is increasingly used in the swine industry due to higher consumer demand for leaner pork products. Redirecting nutrients to favor leanness rather than fat deposition, ractopamine improves growth and carcass traits of finishing pigs. However, the impact of this agonist on pork quality is not clearly defined. Understanding the biological effects of dietary ractopamine dose, treatment period, lysine levels, and the lysine to metabolizable energy ratio will help pork producers achieve improvements in animal performance, carcass leanness, and economic efficiency in swine production systems.

  8. Microscopic observation of pattern attack by aggressive ions on finished surface of aluminium alloy sacrificial anode

    International Nuclear Information System (INIS)

    Zaifol Samsu; Muhammad Daud; Siti Radiah Mohd Kamarudin; Nur Ubaidah Saidin; Azali Muhammad; Mohd Shaari Ripin; Rusni Rejab; Mohd Shariff Sattar

    2010-01-01

    This paper presents the results of a microscopic observation on submerged finished surface of aluminium alloy sacrificial anode. Experimental tests were carried out on polished surface aluminium anode exposed to seawater containing aggressive ions in order to observe of pattern corrosion attack on corroding surface of anode. Results have shown, at least under the present testing condition, that surface of sacrificial anode were attack by an aggressive ion such as chloride along grain boundaries. In addition, results of microanalysis showed that the corrosion products on surface of aluminium alloy have Al, Zn and O element for all sample and within the pit was consists of Al, Zn, O and Cl element. (author)

  9. Effects of deep-bedded finishing system on market pig performance, composition and pork quality.

    Science.gov (United States)

    Patton, B S; Huff-Lonergan, E; Honeyman, M S; Crouse, J D; Kerr, B J; Lonergan, S M

    2008-03-01

    The purpose of this study was to compare effects of finishing environment on growth performance, pork quality and lipid composition of pork. Environments compared were standard confinement (CON) and deep-bedded semi-outdoor systems. The deep-bedded method employed in the current study was the use of hoop structures. Hoops are large, tent-like shelters with cornstalks or straw for bedding. Gilts ranging in weight from 59 to 71 kg were randomly assigned to treatments of Hoop (n = 50) and CON (n = 18) environments. Gilts were fed a two-phase dietary sequence, ad libitum for 45 days. Six gilts per treatment were selected for carcass composition and quality evaluation. The experiment was replicated a total of five times. Pigs raised in the Hoop environment gained significantly less and required significantly more feed for growth than pigs raised in the CON environment. Carcasses from CON-finished pigs were significantly fatter at the 10th rib, which lowered carcass percentage fat-free lean(FFL) and they also had greater loin marbling scores compared with carcasses from Hoop-finished pigs (P < 0.05). Significant replication effects were noted on beginning weight, live weight, carcass weight, percentage FFL, backfat, lipid content and adipose firmness. Carcasses from Hoop pigs had lower proportions of palmitic acid (P < 0.05), and higher proportions of oleic and linoleic acid (P < 0.05) in the inner layer of adipose tissue. The proportion of saturated fatty acid was lower, and that of mono- and poly-unsaturated fatty acid was higher in the inner layer of the adipose tissue of Hoop pigs. Variations in fatty acid composition and lipid deposition may have been caused by environmental temperature, since decreases in environmental temperature accompanied compositional variation of the adipose, leading to higher proportions of monounsaturated fatty acid and lower proportions of saturated and polyunsaturated fatty acid in adipose tissue, regardless of treatment. Volatile profile

  10. Nice Teams Finish Last The Secret to Unleashing Your Team's Maximum Potential

    CERN Document Server

    Miller, Brian Cole

    2010-01-01

    Don't rock the boat. Don't make waves. Don't offend anyone. There's a palpable feeling that clouds many team meetings and keeps them from being productive: over-politeness. And while the conflict that naturally exists in most organizations hasn't gone away, it manifests itself in passive-aggression, mediocrity, and a molasses-like inability to get anything done. Nice Teams Finish Last provides the antidote to this all-too-common tendency, giving managers, team leaders and members, and facilitators the practical support they need to battle "the nice trap" and start getting results! The book hel

  11. Finish your film! tips and tricks for making an animated short in Maya

    CERN Document Server

    Roy, Kenny

    2014-01-01

    Finish Your Film! Tips and Tricks for Making an Animated Short in Maya is a first-of-its-kind book that walks the reader step-by-step through the actual production processes of creating a 3D Short film with Maya. Other books focus solely on the creative decisions of 3D Animation and broadly cover the multiple phases of animation production with no real applicable methods for readers to employ. This book shows you how to successfully manage the entire Maya animation pipeline. This book blends together valuable technical tips on film production and real-world shortcuts in a step-by-step approach

  12. Herd-level risk factors for antimicrobial demanding gastrointestinal diseases in Danish herds with finisher pigs

    DEFF Research Database (Denmark)

    Hybschmann, G. K.; Ersbøll, A.K.; Vigre, Håkan

    2011-01-01

    of Veterinary Medicine, the Central Husbandry Register and the Danish Agriculture and Food Council. In total, 3192 pig herds with 26,973 records (quarters with prescriptions) were included. The outcome was presented as average AM use (measured as Animal Daily Dosage) for GI diseases per finishing pig per...... to conventional herds. Significant regional differences inAMUwere seen. Additionally, the results showed that other herd factors and veterinarians were more influential than the investigated herd risk factors. This illustrates the difficulties of characterising AM-demanding GI diseases in herds by the use...

  13. Alternative technique for class V resin composite restorations with minimum finishing/polishing procedures.

    Science.gov (United States)

    Perez, Cesar Reis

    2010-01-01

    Class V restorations are a very common occurrence in clinics. Some reasons include an increase in non-carious cervical lesions (NCCL), root caries and the elderly population. Unfortunately, Class V restorations also represent one of the less durable types of restorations and have a high index of loss of retention, marginal excess and secondary caries. Some causes for these problems include difficulties in isolation, insertion, contouring, finishing and polishing procedures. This technique demonstrates an alternative isolation and insertion method using photocured gingival barrier in association with a flowable resin and hybrid resin composite to recreate the gingival wall with minimum or no excess.

  14. Treatability studies of alternative wastewaters for Metal Finishing Effluent Treatment Facility

    International Nuclear Information System (INIS)

    Wittry, D.M.; Martin, H.L.

    1994-01-01

    The 300-M Area Liquid Effluent Treatment Facility (LETF) of the Savannah River Site (SRS) is an end-of-pipe industrial wastewater treatment facility that uses precipitation and filtration, which is the EPA Best Available Technology economically achievable for a Metal Finishing and Aluminum Form Industries. Upon the completion of stored waste treatment, the LETF will be shut down, because production of nuclear materials for reactors stopped at the end of the Cold War. The economic use of the LETF for the treatment of alternative wastewater streams is being evaluated through laboratory bench-scale treatability studies

  15. Herd-level risk factors for subclinical Salmonella infection in European finishing-pig herds

    DEFF Research Database (Denmark)

    Wong, Danilo Lo Fo; Dahl, J.; Stege, H.

    2004-01-01

    Our objective was to find herd factors associated with pigs testing seropositive for Salmonella. Data were collected from 359 finishing-pig herds in Germany, Denmark, Greece, The Netherlands and Sweden, between 1996 and 1998. Pigs fed non-pelleted feed (dry or wet) had 2- and 2.5-times lower odds....... Pigs produced in batches in herds with hygienic-lock facilities had >3-times lower odds for testing seropositive compared to pigs in herds where only one or neither factor was present. In herds where the caretaker(s) washed hands consistently before tending to the animals, pigs had 1.5-times lower odds...

  16. Nice Guys Finish Last: Are People with Higher Tax Morale Taxed More Heavily?

    OpenAIRE

    Doerrenberg, Philipp; Duncan, Denvil; Fuest, Clemens; Peichl, Andreas

    2012-01-01

    This paper is the first to provide evidence of efficient taxation of groups with heterogeneous levels of 'tax morale'. We set up an optimal income tax model where high tax morale implies a high subjective cost of evading taxes. The model predicts that 'nice guys finish last': groups with higher tax morale will be taxed more heavily, simply because taxing them is less costly. Based on unique cross-country micro data and an IV approach to rule out reverse causality, we find empirical support fo...

  17. Plutonium Finishing Plant (PFP) Waste Composition and High Efficiency Particulate Air Filter Loading

    Energy Technology Data Exchange (ETDEWEB)

    ZIMMERMAN, B.D.

    2000-12-11

    This analysis evaluates the effect of the Plutonium Finishing Plant (PFP) waste isotopic composition on Tank Farms Final Safety Analysis Report (FSAR) accidents involving high-efficiency particulate air (HEPA) filter failure in Double-Contained Receiver Tanks (DCRTs). The HEPA Filter Failure--Exposure to High Temperature or Pressure, and Steam Intrusion From Interfacing Systems accidents are considered. The analysis concludes that dose consequences based on the PFP waste isotopic composition are bounded by previous FSAR analyses. This supports USQD TF-00-0768.

  18. Pricing for finished products of the enterprise: accounting and analytical aspect

    Directory of Open Access Journals (Sweden)

    N.L. Pravdyuk

    2017-03-01

    Full Text Available The pricing policy chosen by the enterprise in respect of goods and finished products of own production, has a decisive influence on the formation of financial results. In modern economic conditions we need to strengthen managerial decisions on the choice and carrying out price policy and a means of solving this problem is accounting. To determine the boundaries and competence of decision-making we analyzed the regulation of these terms and processes, as well as the dynamics of the stocks across sectors of the economy, the consumer price index, producer price index, the price index of realization of industrial products. Widely used data analytical reviews of the national Bank of Ukraine, enterprises' expectations regarding efficiency, the analysis of financial market indicators, etc. Established that the provision of information management pricing of goods shall conform to the requirements of the economy, by deepening complexity of accounting, to ensure the needs of consumers. According to the study substantiates the basics of accounting and analytical aspect of the pricing policy for finished products businesses. In the study of pricing policies in respect of goods in accounting and analytical aspect, we have established the following. The existing normative-legal acts and definitions of researchers on economic and accounting analysis of the concept give a sufficiently wide interpretation, which depends on the orientation and activity of the enterprise. Factors and points of influence on the efficiency of the pricing policy are: information support of process of pricing assessment of pricing factors, establish the objectives of price policy, assessment of customer demand, cost analysis, competition analysis, selecting a pricing method that measures the price adjustment, the evaluation price risk. The economic impact of the market environment is the most significant to the pricing policy of agricultural enterprises, which revealed the analysis

  19. Screen-Printed PEDOT:PSS Electrodes on Commercial Finished Textiles for Electrocardiography.

    Science.gov (United States)

    Sinha, Sneh K; Noh, Yeonsik; Reljin, Natasa; Treich, Gregory M; Hajeb-Mohammadalipour, Shirin; Guo, Yang; Chon, Ki H; Sotzing, Gregory A

    2017-11-01

    Electrocardiography (ECG) is an essential technique for analyzing and monitoring cardiovascular physiological conditions such as arrhythmia. This article demonstrates the integration of screen-printed ECG circuitry from a commercially available conducting polymer, PEDOT:PSS, onto commercially available finished textiles. ECG signals were recorded in dry skin conditions due to the ability of PEDOT:PSS to function as both ionic and electronic conductors. The signal amplifies when the skin transpires water vapor or by applying a common lotion on the skin. Finally, PEDOT:PSS wires connected to PEDOT:PSS electrodes have been shown to record ECG signals comparable to Ag/AgCl connected to copper wires.

  20. Optimization of surface finish of 8-m class ULE glass telescope mirror blanks for lifetime mechanical reliability

    Science.gov (United States)

    Gulati, Suresh T.

    1996-08-01

    The mechanical reliability of 8 m class ULETM glass telescope mirror blanks is a key requirement for both the blank manufacturer and end-user. The massive monolithic blank experiences stresses during the various manufacturing steps including handling, grinding, sagging, and finishing. Likewise, it is subjected to vibrational loads and road shocks during transportation to end-user. And finally, it experiences transient stresses during installation and steady-state static stresses throughout its useful life in service. The large blank, which weighs nearly 35 tons, must have appropriate surface finish to sustain manufacturing, transportation, installation and service stresses with low probability of flaw initiation and propagation. This paper examines the critical stress/time histories the blanks experience during manufacturing and their ability to initiate slow crack growth from grinding flaws. Two different surface finishes, namely 120 grit and 270/325 grit, with and without acid etching are characterized with respect to strength, flaw, and fatigue behavior. These data show that the 270/325 grit finish with acid etching is appropriate for the sagging step which imposes a static stress of 750 psi in the center region of the mirror blank over a two-week sag period. Similarly, the 120 grit surface finish is adequate for grinding, packaging and transporting steps which impose a static stress of 435 psi in the support pad region for a three-month period. These predictions, based on Power law fatigue model, were verified by conducting static fatigue tests (at appropriate stress levels) on a large sample of 6' diameter ULETM discs (with appropriate surface finish) at 25 degree(s)C and 100% RH. Such a verification is imperative for selecting appropriate surface finishes for the mirror blanks to promote mechanical reliability during manufacturing and service.

  1. Effects of the truth FinishIt brand on tobacco outcomes.

    Science.gov (United States)

    Evans, W Douglas; Rath, Jessica M; Hair, Elizabeth C; Snider, Jeremy Williams; Pitzer, Lindsay; Greenberg, Marisa; Xiao, Haijun; Cantrell, Jennifer; Vallone, Donna

    2018-03-01

    Since 2000, the truth campaign has grown as a social marketing brand. Back then, truth employed branding to compete directly with the tobacco industry. In 2014, the launch of truth FinishIt reflected changes in the brand's strategy, the tobacco control environment, and youth/young adult behavior. Building on a previous validation study, the current study examined brand equity in truth FinishIt , as measured by validated multi-dimensional scales, and tobacco related attitudes, beliefs, and behavior based on two waves of the Truth Longitudinal Cohort data from 2015 and 2016. A fixed effects logistic regression was used to estimate the change in brand equity between panel survey waves 3 and 4 on past 30-day smoking among ever and current smokers. Additional models determined the effects of brand equity predicting tobacco attitudes/use at follow up among the full sample. All analyses controlled for demographic factors. A one-point increase in the brand equity scale between the two waves was associated with a 66% greater chance of not smoking among ever smokers (OR 1.66, CI 1.11-2.48, p  brand equity at wave 3 predicted less smoking at wave 4 and more positive anti-tobacco attitudes. Being male, younger, and non-white predicted some of the tobacco related attitudes. Future research should examine long-term effects of brand equity on tobacco use and how tobacco control can optimize the use of branding in campaigns.

  2. Activated sludge respirometry to assess solar detoxification of a metal finishing effluent

    Energy Technology Data Exchange (ETDEWEB)

    Santos-Juanes, L.; Amat, A.M. [Departamento de Ingenieria Textil y Papelera, Escuela Politecnica Superior de Alcoy, Universidad Politecnica de Valencia, Plaza Ferrandiz y Carbonell s/n, E-03801 Alcoy (Spain); Arques, A. [Departamento de Ingenieria Textil y Papelera, Escuela Politecnica Superior de Alcoy, Universidad Politecnica de Valencia, Plaza Ferrandiz y Carbonell s/n, E-03801 Alcoy (Spain)], E-mail: aarques@txp.upv.es; Bernabeu, A.; Silvestre, M.; Vicente, R. [Departamento de Ingenieria Textil y Papelera, Escuela Politecnica Superior de Alcoy, Universidad Politecnica de Valencia, Plaza Ferrandiz y Carbonell s/n, E-03801 Alcoy (Spain); Ano, E. [Departamento de Gestion e Innovacion, Area de producto y desarrollo sostenible, Asociacion de Investigacion de la Industria del Juguete, Conexas y Afines (AIJU), Avda. de la industria, 23, 03440 Ibi (Spain)], E-mail: m.ambiente@aiju.info

    2008-05-30

    Inhibition of the respiration of activated sludge has been tested as a convenient method to estimate toxicity of aqueous solutions containing copper and cyanide, such as metal finishing effluents; according to this method, an EC{sub 50} of 0.5 mg/l was determined for CN{sup -} and 3.0 mg/l for copper. Solar detoxification of cyanide-containing solutions was studied using TiO{sub 2}, but this process was unfavourable because of the inhibitory role that plays the copper ions present in real effluents on the oxidation of cyanide. On the other hand, the oxidative effect of hydrogen peroxide was greatly enhanced by Cu{sup 2+} and solar irradiation, as complete elimination of free and complexed cyanide could be accomplished, together with precipitation of copper, in experiments carried out at pilot plant scale with real metal finishing effluents. Under these conditions, total detoxification was achieved according to respirometric measurements although some remaining toxicity was determined by more sensitive Vibrio fischeri luminescent assay.

  3. Activated sludge respirometry to assess solar detoxification of a metal finishing effluent

    International Nuclear Information System (INIS)

    Santos-Juanes, L.; Amat, A.M.; Arques, A.; Bernabeu, A.; Silvestre, M.; Vicente, R.; Ano, E.

    2008-01-01

    Inhibition of the respiration of activated sludge has been tested as a convenient method to estimate toxicity of aqueous solutions containing copper and cyanide, such as metal finishing effluents; according to this method, an EC 50 of 0.5 mg/l was determined for CN - and 3.0 mg/l for copper. Solar detoxification of cyanide-containing solutions was studied using TiO 2 , but this process was unfavourable because of the inhibitory role that plays the copper ions present in real effluents on the oxidation of cyanide. On the other hand, the oxidative effect of hydrogen peroxide was greatly enhanced by Cu 2+ and solar irradiation, as complete elimination of free and complexed cyanide could be accomplished, together with precipitation of copper, in experiments carried out at pilot plant scale with real metal finishing effluents. Under these conditions, total detoxification was achieved according to respirometric measurements although some remaining toxicity was determined by more sensitive Vibrio fischeri luminescent assay

  4. Improvement of finishing antifriction treatment without abrasive of the rubbing parts surfaces of agricultural machineries

    Directory of Open Access Journals (Sweden)

    I.V. Shepelenk

    2014-06-01

    Full Text Available The wear of machines and mechanisms after rubbing is a major concern. The costs of manufacturing and restoration parts for agricultural machinery are enormous such as the trunnions pinions of hydraulic pumps. Finishing treatment antifriction without abrasive (FTAA is the existing method of manufacturing and restoration, but it has disadvantages like low work efficiency and the frequent replacement of the instrument. That is why a new method of FTAA parts type ''tree'' has been developed called vibratory finishing treatment antifriction without abrasive, (VFTAA method. The study was conducted at the laboratory of the State Technical University of Kirovograd (Ukraine where turn 16K20, the profilograph-profilometer "Talysurf-5", the scanning electron microscope REM-106I, friction machine MI-1M and the stand KI-28097-02M were used respectively for machining, study of micro relief before and after the VFTAA, microstructure, wear resistance and the determination of the break-in period of parts. The results showed that the VFTAA helped reduce the roughness Ra of the samples studied by half compared to the samples processed by polishing and 1.3 times compared to those treated with the FTAA, the break-in period has been reduced four times , this leads to an increase in the life of the hydraulic pump. This technology can be recommended for manufacturing and repair of hydraulic units of agricultural machineries.

  5. Hydric properties of some iberian ornamental granites with different superficial finishes: a petrophysical interpretation

    Directory of Open Access Journals (Sweden)

    Rojo, A.

    2003-03-01

    Full Text Available Some physical properties of three ornamental granites with different superficial finishes (polished, sawn and flamed were quantified by standard tests. These granites are commercially known as Rosa Porrino, Rosavel and Blanco Alcazar. The determined properties were: density, open porosity, water absorption, capillarity, evaporation, vapour absorption and water vapour permeability. The values of the hydric properties in the studied granites fundamentally depended on their textural characteristics, mainly grain size, micro cracking network and open porosity, and, to a lesser extent, on their superficial finish.

    El estudio analiza las diferencias en el comportamiento hídrico de tres granitos con diferentes acabados superficiales: pulido, corte de sierra y chorro de fuego. Estos granitos se comercializan con los nombres de Rosa Porrino, Rosavel y Blanco Alcázar. Las propiedades determinadas han sido: densidad, porosidad abierta, absorción libre de agua, absorción de vapor de agua, absorción de agua por capilaridad, evaporación y permeabilidad al vapor de agua. Los valores de las propiedades hídricas determinadas dependen fundamentalmente de las características texturales: tamaño de grano, microfisuras y porosidad abierta y, en menor medida, de los acabados superficiales.

  6. Spectroscopic Analysis to Characterize Finishing Treatments of Ancient Bowed String Instruments.

    Science.gov (United States)

    Fiocco, Giacomo; Rovetta, Tommaso; Gulmini, Monica; Piccirillo, Anna; Licchelli, Maurizio; Malagodi, Marco

    2017-11-01

    Historical bowed string instruments exhibit acoustic features and aesthetic appeal that are still considered inimitable. These characteristics seem to be in large part determined by the materials used in the ground and varnishing treatments after the assembly of the instrument. These finishing processes were kept secret by the violinmakers and the traditional methods were handed down orally from master craftsmen to apprentices. Today, the methods of the past can represent a secret to be revealed through scientific investigations. The "Cremonese" methods used in the 17th and 18th centuries were lost as the last Great Masters from the Amati, Guarneri, and Stradivari families passed away. In this study, we had the chance of combining noninvasive and microinvasive techniques on six fragments of historical musical instruments. The fragments were detached from different instruments during extraordinary maintenance and restoration treatments, which involved the substitution of severely damaged structural parts like top plates, back plates, or ribs. Therefore, the fragments can offer to the scientists a valuable overview on the materials and techniques used by the violinmakers. The results obtained by portable X-ray fluorescence, optical microscopy, scanning electron microscopy coupled with energy dispersive X-ray spectrometry, and Fourier transform infrared microscopy allowed us to: (1) determine the stratigraphy of six instruments; (2) obtain new information about the materials involved in the finishing processes employed in Cremona; and (3) elucidate the technological relationship among the procedures adopted in the violin making workshops during the considered period.

  7. Sludge stabilization at the Plutonium Finishing Plant, Hanford Site, Richland, Washington

    International Nuclear Information System (INIS)

    1994-10-01

    This Environmental Assessment evaluates the proposed action to operate two laboratory-size muffle furnaces in glovebox HC-21C, located in the Plutonium Finishing Plant (PFP), Hanford Site, Richland, Washington. The muffle furnaces would be used to stabilize chemically reactive sludges that contain approximately 25 kilograms (55 pounds) of plutonium by heating to approximately 500 to 1000 degrees C (900 to 1800 degrees F). The resulting stable powder, mostly plutonium oxide with impurities, would be stored in the PFP vaults. The presence of chemically reactive plutonium-bearing sludges in the process gloveboxes poses a risk to workers from radiation exposure and limits the availability of storage space for future plant cleanup. Therefore, there is a need to stabilize the material into a form suitable for long-term storage. This proposed action would be an interim action, which would take place prior to completion of an Environmental Impact Statement for the PFP which would evaluate stabilization of all plutonium-bearing materials and cleanout of the facility. However, only 10 percent of the total quantity of plutonium in reactive materials is in the sludges, so this action will not limit the choice of reasonable alternatives or prejudice the Record of Decision of the Plutonium Finishing Plant Environmental Impact Statement

  8. Influence of production factors on feed intake and feed conversion ratio of grow-finishing pigs

    Directory of Open Access Journals (Sweden)

    Caio Abércio da Silva

    2017-05-01

    Full Text Available The aim of this study was to identify and quantify, through mathematical models, the production factors of grow-finishing (GF phases that influence the daily feed intake (DFI and feed conversion ratio (FCR in pigs. Sixty-five GF farms were evaluated between 2010 and 2013, linked to a cooperative system located in the western Parana State, Brazil, representing 463 batches, with a mean of 642.79 ± 363.29 animals per batch, equalling approximately 300,000 animals. Forty production factors were considered that related to management, sanitation, installations and equipment, nutrition, genetics and environment on the farms. The DFI was influenced by the barn's position relative to the sun (P = 0.048, initial body weight (P < 0.0001 and final body weight (P < 0.0001. It was observed that the FCR was influenced by the barn’s position relative to the sun (P = 0.0001, the use of humidifiers/misting (P = 0.03, the presence of composters (P = 0.006, trees on the sides of barns (P < 0.045, the initial body weight of the pigs (P < 0.0001 and duration of the grow-finishing phase (P < 0.0001. The variables selected in the models explained approximately 44 and 20% of the total variance in the DFI and FCR, respectively, demonstrating that this resource is a good tool for interpreting the factors related to the parameters evaluated.

  9. Characterization and influence of production factors on growing and finishing pig farms in Brazilian cooperatives

    Directory of Open Access Journals (Sweden)

    Caio Abércio da Silva

    Full Text Available ABSTRACT The objective of this study was to identify and quantify, through mathematical models, the main factors of production in growing and finishing pig units linked to three Brazilian cooperatives located in Western Region of Paraná State that influence the parameters of daily feed intake and feed conversion ratio. The records of 216 growing and finishing farms from 2010 to 2013, representing 1,533 batches, and totaling approximately 1,025,000 pigs, were evaluated. Thirty production factors related to the management, health, installations and equipment, nutrition, genetics, and environment were considered. The number of pigs per pen, the feeder model, the origin and sex of the animals, and the initial and final body weights were the factors included in the final models for both dependent variables (daily feed intake and feed conversion ratio and had a significant impact on these ratios. Approximately, 41 and 55% of the total variance found for daily feed intake and feed conversion ratio, respectively, were explained by the variables included in the final models. Mathematical models could serve as important tools to aid the decision-making in pig production systems.

  10. Plutonium Finishing Plant Treatment and Storage Unit Dangerous Waste Training Plan

    International Nuclear Information System (INIS)

    ENTROP, G.E.

    2000-01-01

    The training program for personnel performing waste management duties pertaining to the Plutonium Finishing Plant (PFP) Treatment and Storage Unit is governed by the general requirements established in the Plutonium Finishing Plant Dangerous Waste Training Plan (PFP DWTP). The PFP Treatment and Storage Unit DWTP presented below incorporates all of the components of the PFP DWTP by reference. The discussion presented in this document identifies aspects of the training program specific to the PFP Treatment and Storage Unit. The training program includes specifications for personnel instruction through both classroom and on-the-job training. Training is developed specific to waste management duties. Hanford Facility personnel directly involved with the PFP Treatment and Storage Unit will receive training to container management practices, spill response, and emergency response. These will include, for example, training in the cementation process and training pertaining to applicable elements of WAC 173-303-330(1)(d). Applicable elements from WAC 173-303-330(1)(d) for the PFP Treatment and Storage Unit include: procedures for inspecting, repairing, and replacing facility emergency and monitoring equipment; communications and alarm systems; response to fires or explosions; and shutdown of operations

  11. Emissions monitoring at a deep-pit swine finishing facility: research methods and system performance.

    Science.gov (United States)

    Jin, Yaomin; Lim, Teng-Teeh; Ni, Ji-Qin; Ha, Jeong-Hyub; Heber, Albert J

    2012-11-01

    This paper describes part of a comprehensive National Air Emissions Monitoring Study (NAEMS) conducted at a swine finishing farm located in the state of Indiana, in the United States. The NAEMS was a 2-year study of emissions from animal feeding operations that produce pork, chicken meat, eggs, and milk. It provided emission data for the US. Environmental Protection Agency (EPA) to develop tools for estimating emissions from livestock farms. The study in Indiana focused on quantifying and characterizing emissions of gases, particulate matter (PM), and volatile organic compounds (VOCs) from a swine finishing quad (four 1000-head rooms under one roof). Long-term continuous and quasi-continuous measurements were conducted with 157 on-line measurement variables using an array of instruments and sensors for gas and PM concentrations, fan operation, room static pressures, indoor temperature and humidity, animal activity and feeding times, and weather conditions. Pig inventory and weight, feed type and quantity, and manure accumulation and composition were also documented. Systematic tests of the measurement system were conducted. Monitoring methodologies, instrumentation applications, equipment maintenance, quality controls, and system performances are presented and can be used as a reference in assessing research quality and improving future environmental studies on livestock facilities.

  12. Effects of dietary starch types on early postmortem muscle energy metabolism in finishing pigs.

    Science.gov (United States)

    Li, Y J; Gao, T; Li, J L; Zhang, L; Gao, F; Zhou, G H

    2017-11-01

    This study aimed to investigate the effects of different dietary starch types on early postmortem muscle energy metabolism in finishing pigs. Ninety barrows (68.0±2.0kg) were randomly allotted to three experimental diets with five replicates of six pigs, containing pure waxy maize starch (WMS), nonwaxy maize starch (NMS), and pea starch (PS) (amylose/amylopectin were 0.07, 0.19 and 0.28 respectively). Compared with the WMS diet, pigs fed the PS diet exhibited greater creatine kinase activity, higher adenosine triphosphate and adenosine diphosphate contents, lower phosphocreatine (PCr), adenosine monophosphate and glycogen contents, and lower glycolytic potential (P<0.05). Moreover, the PS diet led to reduced percentage of bound hexokinase activity, decreased level of phosphorylated AKT (P<0.05) and increased level of hypoxia-inducible factor-1α (P<0.05). In conclusion, diet with high amylose content might promote PCr degradation and inhibit the rate of glycolysis, followed by attenuation of early postmortem glycolysis in finishing pigs. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Performance, carcass traits and costs of Suffolk lambs finishing systems with early weaning and controlled suckling

    Directory of Open Access Journals (Sweden)

    Sergio Rodrigo Fernandes

    2014-04-01

    Full Text Available The performance, carcass traits and finishing costs of Suffolk lambs were evaluated in three systems: (1 lambs weaned with 22 kg of body weight (BW and supplemented with concentrate on pasture until slaughter; (2 lambs weaned with 22 kg BW and fed in feedlot until slaughter; (3 lambs maintained in controlled nursing after 22 kg BW and creep fed in feedlot until slaughter. Average daily gain (ADG was 224 g/d for lambs weaned and supplemented with concentrate on pasture, 386 g/d for lambs weaned in feedlot and 481 g/d for lambs under controlled nursing. Empty body weight and visceral fat deposition were highest in lambs from feedlot systems. Carcass weights and carcass yields were highest for lambs in controlled nursing. Finishing total costs were highest in controlled nursing and lowest in the system with weaning in feedlot. High concentrate diet associated with controlled nursing in feedlot allowed lambs to reach the growth potential and carcasses with higher weights, higher yields and higher fat content. After weaning, lambs in feedlot fed with high concentrate diet had higher weight gain than lambs supplemented with concentrate on pasture. Carcasses produced under these two systems presented the same characteristics. The system with weaning in feedlot showed the lowest cost per kg carcass.

  14. Effect of surface finishing and heat treatments on the mechanical strength of sintered alumina

    International Nuclear Information System (INIS)

    Lino, U.R.A.

    1982-04-01

    The effect of surface finishing on the mechanical strength of two pure aluminas, one of self-production and another a commercial one, is studied. Three types of finishings: as-sintered, as machined and as-machined with thermal treatment were studied. It was verified that the as-machined alumina is about 50 percent stronger than the as-sintered one, and that a thermal treatment increases even more the mechanical strength of the sintered alumina. The effect of the volume and pressing direction on mechanical strength was studied. The kinetics of crack healing was determined from a series of systematically selected thermal treatments with annealing temperatures between 1200 0 C and 1600 0 C. It was verified that a recently developed theoretical model for crack healing can describe the experimental results; using this model a value for the activation energy of the process of 715 kJ/mcl was obtained, which suggests that crack healing is promoted by volume diffusion. The material behavior under subcritical crack growth action was also studied, and a value of about 40 for the subcritical crack growth exponent N from dynamic loading tests in water was found. A fractographic study intended to localize and measure the flaws that originated the fracture of the tested specimens was performed; the measured flaw sizes were compared with the flaw size calculated from the values of the measured mechanical strength; in this comparison an excellent agreement was observed. (Author) [pt

  15. A Study on Herbal Finish to Prevent Bed Sore Using Mangifera indica and Triphala Dried Fruit

    Directory of Open Access Journals (Sweden)

    Kiruthika Deivasigamani

    2014-01-01

    Full Text Available “Bed sores” owe their name to the observation that patients who were bedridden and not properly repositioned would often develop ulcerations or sores on their skin, typically over bony prominences. These bed sores, which result from prolonged pressure, are also called “decubitus ulcers,” “pressure sores,” “skin breakdown,” and “pressure ulcers.” They are associated with adverse health outcomes and high treatment costs. This study focuses on developing herbal finish to prevent bed sores. For this purpose, functional finishing was utilized to produce a bedsore preventing fabric. Plain weave cotton fabric was dyed by using herbal extracts, dried, and then cured. Two samples in different ratios (1 : 2 and 2 : 1 of two herbal extracts (Mangifera indica and Triphala dried fruits were prepared with and without binder (chitosan. Air permeability, wicking ability, Drop Test for absorbency, and antibacterial properties were examined for those samples. Based on the results, fabric dyed with Mangifera indica and Triphala dried fruits in the ratio of 2 : 1 with chitosan is determined as the most promising combination for the final product.

  16. Water/oil repellent property of polyester fabrics after supercritical carbon dioxide finishing

    Directory of Open Access Journals (Sweden)

    Xu Yan-Yan

    2015-01-01

    Full Text Available The strong permeability and driving force of supercritical carbon dioxide renders it an ideal medium for fabrics finishing. This paper is to use supercritical carbon dioxide medium with a solution of organic fluorine to fabricate water/oil repellent polyester fabrics. A series of characterization methods including Fourier transform infrared spectrometry, energy dispersive spectrometry, and scanning electron microscopy were carried out to evaluate the fabrics finishing. Fourier transform infrared spectrometry showed that the transmittance peak appeared at 1202.4 and 1147.4 cm-1, indicating the presence of -CF2- group on the surface of polyester fabrics. The results of energy dispersive spectrometer and scanning electron microscopy showed that the fluorine was evenly distributed on the fibers surface. In addition, a series of physical properties were detected, including contact angel, air permeability, breaking strength, and wearing resistance. The average water and hexadecane contact angles were 147.58° and 143.78°, respectively. Compared with the initial fabrics, the treated one has little change in air permeability, while its strength increased greatly. The treated fabrics gained good water/oil repellent properties while keeping good air permeability and improving mechanical property.

  17. Phosphorus requirement and excretion of finishing beef cattle fed different concentrations of phosphorus.

    Science.gov (United States)

    Geisert, B G; Erickson, G E; Klopfenstein, T J; Macken, C N; Luebbe, M K; MacDonald, J C

    2010-07-01

    Phosphorus is an expensive nutrient to supplement, and excess may lead to manure P challenges. Therefore, minimizing dietary P to meet requirements is important. Two experiments were conducted to determine the P requirement of finishing cattle (Exp. 1) and to evaluate the effects of feeding different P concentrations on the quantity and route of P excretion (Exp. 2). In Exp. 1, 60 heifers (BW = 278 kg +/- 17 kg) were individually fed 1 of 5 dietary P concentrations (0.10, 0.17, 0.24, 0.31, or 0.38% P). Cattle performance, plasma P concentration, bone characteristics, and bone P concentration were used to determine the P requirement. Intake and ADG increased quadratically (P urine as a percentage of total P excretion. Steers on the 0.12% P diet excreted very little P in urine (0.50 g/d). Excretion of P was less (P < 0.05) for the cattle fed 0.12% P compared with all other treatments. Results from cattle performance, plasma P concentrations, and bone characteristics indicate that the heifers fed 0.10% P were experiencing a deficiency and the P requirement of finishing heifers is between 0.10 and 0.17% P. Dietary P concentrations of 0.10 to 0.17% P resulted in decreased P excretion. Supplementation of mineral P is unnecessary in grain-based feedlot diets because dietary P will greatly exceed the requirements (<0.17%).

  18. Headspace Volumetric Karl Fischer Titration for the Determination of Water Content in Finished Tobacco Products

    Directory of Open Access Journals (Sweden)

    Aydin N

    2014-12-01

    Full Text Available Because many physicochemical properties of tobacco are highly sensitive to its moisture content, the determination of water level is an important parameter for tobacco characterization. A headspace volumetric Karl Fischer titration (HS-V-KFT method is presented for the quantification of water content in different finished tobacco materials. The parameters affecting the extraction of water from the tobacco materials were the sample size and the oven temperature which have been optimized. The extraction of water from the samples was achieved within a reasonable time (<25 min with a sample size of 200 mg and an optimum temperature of between 90 °C and 100 °C. The results of the water determination by HS-V-KFT at the optimized parameters were in good agreement with those obtained by standard volumetric Karl Fischer titration. HS-V-KFT showed very good repeatability (RSDr 0.9% and intermediate precision (RSDiR 1.1%. With respect to a considerable time saving, solvent consumption reduction, precision and accuracy, HS-V-KFT can therefore be suggested as the method of choice to determine water amount in finished tobacco products.

  19. Waterproof finishing of some textile fabrics by radiation and thermal treatment

    International Nuclear Information System (INIS)

    Mohamed, S.S.

    2003-01-01

    Different synthetic fabrics have been treated by different methods and formulations to umpart waterproof finishing. These methods include surface coating with formulations based essentially on polydimethylsiloxane, together with styrene or methyl methacrylate monomers and their corresponding oligomers (polymers) under the effect of accelerated electrons. The other methods include the gamma radiation graft copolymerization of polydimethyllsiloxane / methyl methacrylate formulation and the commercial compound Wacker 290 onto the same synthetic fabrics polyester, nylon-6 and cotton/polyester blend. Also, the synthetic fabrics were treated with commercial compound Wacker 290 under the effect of thermal curing. Moreover, the effect of these treatments on the thermal stability, mechanical properties has been investigated. The results showed that the waterproof properties, in term of water repellency and absorption, of the different fabrics depend to a great extent, on the type and content of the formulation, method of treatment and the compatibility between the fabric and used formulation. It was found that polyester fabric displayed the highest water resistance regardless of the used silicone formulation. These treatment inpress the crease recovery and has a little effect on the dyeing and thermal properties. In comparison, electron surface coating is the most effective method to impart waterproof finishing, while graft copolymerization needs high dose levels to obtain such property

  20. Optimizing Organophosphorus Fire Resistant Finish for Cotton Fabric Using Box-Behnken Design

    International Nuclear Information System (INIS)

    Sohail, Y.; Parag, B.; Nemeshwaree, B.; Giorgio, R.

    2016-01-01

    N-methylol dimethyl phosphono propionamide (MDPA) is one of the most utilized fire resistant (FR) finishes for cotton fabrics, utilized as part of a formulation with trimethylol melamine (TMM) to acquire better crosslinking and enhanced FR properties. The system parameters of the finishing treatment were upgraded for better FR properties and low mechanical loss to the fabric by the response surface methodology utilizing Box-Behnken statistical designed experimental strategy. The impacts of concentration on the cotton fabric’s properties (fire resistance and mechanical properties) were assessed with the regression equations. The optimum conditions by predicting the FR reagents focusing intact mechanical properties of the fabric were additionally studied. It was found that the parameters of crosslinking agents in the FR formulation have a prime role in the general FR properties of the cotton fabrics. The R-squared estimations of the considerable number of responses were above 92%, demonstrating the level of relationship between the predicted values by the Box-Behnken frameworks and the real test results.

  1. Optimasi proses finishing kulit ikan nila (Oreochromis niloticus untuk bagian atas sepatu

    Directory of Open Access Journals (Sweden)

    Emiliana Kasmudjiastuti

    2014-12-01

    Full Text Available The aims of this study was to get the optimum finishing formulations of tilapia fish skin for shoe upper. The variations of experiment were four factors, namely of the variation of binders (1:2 and 1:3, lacquer water (1:1 and 1:2, plating temperatures (50, 65, 80 and 95°C and plating time (0.5, 1, and 1.5 seconds. Testing was conducted on tensile strength, elongation at break, tear strength, stitch strength, softness, and colour fastness. Statistical analysis was conducted using the General Linear Model (GLM followed by Tukey’s Studentized Range Test (TSRT. The results showed that the optimum formula for finishing were performed by a variation of binder 1:2, lacquer water 1:2, temperature of plating 95°C and time of plating 1.5 seconds, and it was characterized by the physical properties of tensile strength 177.32 kg/cm2, elongation at break 62%, tear strength 41.92 kg/cm, stitch strength 113.06 kg/cm, softness 2.33 and generally met the standard requirements of SNI 0253:2009: Footwear upper leather - goat skin.

  2. Influence of Rapeseed Meal on Growth Performance, Blood Profiles, Nutrient Digestibility and Economic Benefit of Growing-finishing Pigs

    Directory of Open Access Journals (Sweden)

    H. B. Choi

    2015-09-01

    Full Text Available This study was conducted to investigate the influence of dietary rapeseed meal (RSM on growth performance, blood profiles, nutrient digestibility and economic benefit of growing-finishing pigs. A total of 120 growing pigs ([Yorkshire×Landrace] ×Duroc with an initial body weight (BW 29.94±0.06 kg were used in this experiment. Pigs were randomly allotted into 1 of 5 treatments in a randomized complete block design and 6 replicates with 4 pigs per pen. Treatments were divided by dietary RSM supplementation levels (0%, 3%, 6%, 9%, or 12% in growing-finishing diets. A linear decrease (p<0.05 of BW and average daily gain (ADG were observed at 13th wk of finishing and overall periods of pigs. Additionally, gain-to-feed ratio (G/F tended to decrease by dietary RSM supplementation in growing-finishing diets (linear, p = 0.07 and quadratic, p = 0.08. Concentrations of serum triiodothyronine and thyroxine were not influenced by dietary RSM treatments whereas thyroid gland and liver weight were increased at 13th wk of finishing period (linear, p<0.05; p<0.01 by increasing dietary RSM supplementation level. In blood profiles, serum total cholesterol and low density lipoprotein cholesterol concentrations were not differed by dietary treatments at 13th wk of finishing period whereas concentration of serum high density lipoprotein cholesterol was affected by the supplementation level of RSM, resulting in a linear RSM level responses (p<0.05. Serum blood urea nitrogen concentration tended to decrease (linear, p = 0.07; p = 0.08 at 6th wk of growing and 13th wk of finishing periods and digestibility of dry matter tended to decrease by dietary RSM (linear, p = 0.09. Crude protein, crude fat and nitrogen retention, whereas, were not affected by dietary RSM supplementation level. In the economic analysis, feed cost per weight gain was numerically decreased when RSM was provided up to 9%. Consequently, RSM could be supplemented to growing-finishing diets up to 9

  3. Influence of Rapeseed Meal on Growth Performance, Blood Profiles, Nutrient Digestibility and Economic Benefit of Growing-finishing Pigs.

    Science.gov (United States)

    Choi, H B; Jeong, J H; Kim, D H; Lee, Y; Kwon, H; Kim, Y Y

    2015-09-01

    This study was conducted to investigate the influence of dietary rapeseed meal (RSM) on growth performance, blood profiles, nutrient digestibility and economic benefit of growing-finishing pigs. A total of 120 growing pigs ([Yorkshire×Landrace] ×Duroc) with an initial body weight (BW) 29.94±0.06 kg were used in this experiment. Pigs were randomly allotted into 1 of 5 treatments in a randomized complete block design and 6 replicates with 4 pigs per pen. Treatments were divided by dietary RSM supplementation levels (0%, 3%, 6%, 9%, or 12%) in growing-finishing diets. A linear decrease (p<0.05) of BW and average daily gain (ADG) were observed at 13th wk of finishing and overall periods of pigs. Additionally, gain-to-feed ratio (G/F) tended to decrease by dietary RSM supplementation in growing-finishing diets (linear, p = 0.07 and quadratic, p = 0.08). Concentrations of serum triiodothyronine and thyroxine were not influenced by dietary RSM treatments whereas thyroid gland and liver weight were increased at 13th wk of finishing period (linear, p<0.05; p<0.01) by increasing dietary RSM supplementation level. In blood profiles, serum total cholesterol and low density lipoprotein cholesterol concentrations were not differed by dietary treatments at 13th wk of finishing period whereas concentration of serum high density lipoprotein cholesterol was affected by the supplementation level of RSM, resulting in a linear RSM level responses (p<0.05). Serum blood urea nitrogen concentration tended to decrease (linear, p = 0.07; p = 0.08) at 6th wk of growing and 13th wk of finishing periods and digestibility of dry matter tended to decrease by dietary RSM (linear, p = 0.09). Crude protein, crude fat and nitrogen retention, whereas, were not affected by dietary RSM supplementation level. In the economic analysis, feed cost per weight gain was numerically decreased when RSM was provided up to 9%. Consequently, RSM could be supplemented to growing-finishing diets up to 9% (3.07

  4. Cotton fabric with plasma pretreatment and ZnO/Carboxymethyl chitosan composite finishing for durable UV resistance and antibacterial property.

    Science.gov (United States)

    Wang, Chunxia; Lv, Jingchun; Ren, Yu; Zhou, Qingqing; Chen, Jiayi; Zhi, Tian; Lu, Zhenqian; Gao, Dawei; Ma, Zhipeng; Jin, Limin

    2016-03-15

    ZnO/carboxymethyl chitosan (ZnO/CMCS) composite was prepared and confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Ultraviolet-visible (UV-vis) spectroscopy, Scanning electron microscope (SEM), Transmission electron microscope (TEM). The combination of plasma pretreatment and ZnO/CMCS composite finishing was applied to provide durable UV resistance and antibacterial activity for cotton fabric. Cotton fabric was pretreated by cold oxygen plasma and the ZnO/CMCS composite finishing was carried out by pad-dry-cure. Cotton fabric was characterized by SEM, FTIR, UV resistance, antibacterial activity and Thermogravimetry (TG). SEM and FTIR analysis demonstrated the presence of ZnO/CMCS composite on cotton fabric and the increasing loading efficiency of ZnO/CMCS composite owing to plasma treatment. UV resistance and antibacterial activity of the finished cotton fabric were greatly improved, which increased with the increasing concentration of ZnO/CMCS composite. TG analysis indicated that the combined finishing of cotton fabric with plasma pretreatment and ZnO/CMCS composite could improve its thermal property. The finished cotton fabric exhibited an excellent laundering durability in UV resistance and antibacterial activity. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Effects of Delayed Finishing/Polishing on Surface Roughness, Hardness and Gloss of Tooth-Coloured Restorative Materials

    Science.gov (United States)

    Yazici, A. Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

    2010-01-01

    Objectives: The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Methods: Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P Grandio samples showed significantly higher roughness than the delayed polished samples (P .05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. Conclusions: The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent. PMID:20046480

  6. Shiga toxin-producing E. coli (STEC) in swine: prevalence over the finishing period and characteristics of the STEC isolates.

    Science.gov (United States)

    Tseng, M; Fratamico, P M; Bagi, L; Manzinger, D; Funk, J A

    2015-02-01

    This descriptive longitudinal study was conducted to investigate the faecal shedding of Shiga toxin-producing E. coli (STEC) in finishing swine and to characterize the swine STEC isolates that were recovered. Three cohorts of finishing swine (n = 50/cohort; total 150 pigs) were included in the longitudinal study. Individual faecal samples were collected every 2 weeks (8 collections/pig) from the beginning (pig age 10 weeks) to the end (pig age 24 weeks) of the finishing period. STEC isolates were recovered in at least one sample from 65·3% (98/150) of the pigs, and the frequency distribution of first-time STEC detection during the finishing period resembled a point-source outbreak curve. Nineteen O:H serotypes were identified among the STEC isolates. Most STEC isolates (n = 148) belonged to serotype O59:H21 and carried the stx 2e gene. One O49:H21 STEC isolate carried the stx 2e and eae genes. High prevalence rates of STEC during the finishing period were observed, and STEC isolates in various non-O157 serogroups were recovered. These data enhance understanding of swine STEC epidemiology, and future research is needed to confirm whether or not swine STEC are of public health concern.

  7. The Effect of Composition on the Surface Finish of PS400: A New High Temperature Solid Lubricant Coating

    Science.gov (United States)

    DellaCorte, Christopher; Stanford, malcolm K.; Thomas, Fransua; Edmonds, Brian J.

    2010-01-01

    A new composite, multi-constituent, solid lubricant coating, NASA PS400, developed for high temperature tribological applications, exhibits a smoother surface finish after grinding and polishing than its predecessors PS200 and PS300. In this paper, the baseline composition of PS400 is modified to investigate each individual constituent s role on the achievable surface finish through a series of coating deposition, grinding, and polishing experiments. Furthermore, to explore the limits of compositional tailoring for improved tribological performance, several PS400 coatings were doped with additional solid lubricants (graphite, MoS2 and BN) and tribologically tested. The test results clearly showed that, compared to PS300 coatings, PS400 achieves a smoother surface finish via a reduced lubricant content. Coatings prepared with higher than the baseline level (10 wt%) of lubricants exhibited higher final surface roughness than the earlier generation PS300 coatings. Reducing or eliminating the one or both lubricants (fluorides or silver) did not further improve the surface finish suggesting that the current composition of PS400 is near optimal with respect to surface finish. Lastly, attempts to improve the poor initial room temperature tribological behavior of PS400 via the addition of traditional solid lubricants were unsuccessful. Based upon this work and earlier results it is expected that future research will concentrate on developing methods to produce a lubricious glaze on the rubbing surface during break in to ensure that low friction and wear are rapidly achieved.

  8. Occurrence and Tissue Distribution of Porcine Circovirus Type 2 Identified by Immunohistochemistry in Danish Finishing Pigs at Slaughter

    DEFF Research Database (Denmark)

    Hansen, Mette Sif; Pors, S. E.; Bille-Hansen, Vivi

    2010-01-01

    or more tissues of 61% of the pigs were positive for PCV2 antigen. Up to 78% of the pigs had mild lymphoid depletion, indistinct lymphoid follicles and/or histiocytic Infiltration of the lymph nodes, but these lesions were not associated with PCV2. No association was found between the presence of lung...... in the early post-weaning period and are also recognized in finishing pigs of 12-19 weeks of I e. The aim of the present study was to assess Hie role of PCV2 infection in disease of finishing pigs. Accordingly, the occurrence and tissue distriubution of PCV2 was examined in Danish finishing pigs at the time...... common and localized to the centres of lymphoid follicles, Corresponding to the morphology and distribution of FDCs. This observation may be interpreted to suggest that PCV2 may Interact with FDCs to cause depletion of B lymphocytes. Alternatively, the FDCs may be a reservoir of infective PCV2...

  9. Parameters optimization of fabric finishing system of a textile industry using teaching–learning-based optimization algorithm

    Directory of Open Access Journals (Sweden)

    Rajiv Kumar

    2017-07-01

    Full Text Available In the present work, a recently developed advanced optimization algorithm named as teaching–learning-based optimization (TLBO is used for the parameters optimization of fabric finishing system of a textile industry. Fabric Finishing System has four main subsystems, arranged in hybrid configuration. For performance modeling and analysis of availability, a performance evaluating model of fabric finishing system has been developed with the help of mathematical formulation based on Markov-Birth-Death process using Probabilistic Approach. Then, the overall performance of the concerned system has first analyzed and then, optimized by using teaching–learning-based optimization (TLBO. The results of optimization using the proposed algorithm are validated by comparing with those obtained by using the genetic algorithm (GA on the same system. Improvement in the results is obtained by the proposed algorithm. The results of effect of variation of the algorithm parameters on fitness values of the objective function are reported.

  10. Development of an Index for the Assessment of Welfare of Finishing Pigs from Farm to Slaughter based on Expert Opinion

    DEFF Research Database (Denmark)

    Brandt, Pia; Rousing, Tine; Herskin, Mette S

    2017-01-01

    For pigs, the day of slaughter involves potential animal welfare threatening elements at different stages such as pick-up pens, loading, transport, unloading, lairage and race. At present no tool for assessing the welfare of finishing pigs from farm exit to stunning is available. The present study...... builds on a protocol for assessment of animal welfare of finishing pigs on the day of slaughter, a protocol which was based on the structure of the Welfare Quality® protocol for finishing pigs at an abattoir. The present study aimed to develop an animal welfare index (AWI) for the day of slaughter......, lairage and race (AWIStage) and across the stages (AWIOverall). The AWIs were tested in 5 farms including a total of 45 fattening pigs delivered to two Danish abattoirs. Possible inter-relations between the AWI and heart rate measurements were examined. For each welfare measurement within stage...

  11. Use of electromyography to detect muscle exhaustion in finishing barrows fed ractopamine HCl.

    Science.gov (United States)

    Noel, J A; Broxterman, R M; McCoy, G M; Craig, J C; Phelps, K J; Burnett, D D; Vaughn, M A; Barstow, T J; O'Quinn, T G; Woodworth, J C; DeRouchey, J M; Rozell, T G; Gonzalez, J M

    2016-06-01

    The objectives of this study were to determine the effects of dietary ractopamine HCl (RAC) on muscle fiber characteristics and electromyography (EMG) measures of finishing barrow exhaustion when barrows were subjected to increased levels of activity. Barrows ( = 34; 92 ± 2 kg initial BW) were assigned to 1 of 2 treatments: a conventional swine finishing diet containing 0 mg/kg ractopamine HCl (CON) or a diet formulated to meet the requirements of finishing barrows fed 10 mg/kg RAC (RAC+). After 32 d on feed, barrows were individually moved around a track at 0.79 m/s until subjectively exhausted. Wireless EMG sensors were affixed to the deltoideus (DT), triceps brachii lateral head (TLH), tensor fasciae latae (TFL), and semitendinosus (ST) muscles to measure median power frequency (MdPF) and root mean square (RMS) as indicators of action potential conduction velocity and muscle fiber recruitment, respectively. After harvest, samples of each muscle were collected for fiber type, succinate dehydrogenase (SDH), and capillary density analysis. Speed was not different ( = 0.82) between treatments, but RAC+ barrows reached subjective exhaustion earlier and covered less distance than CON barrows ( 0.29). There was a treatment × muscle interaction ( = 0.04) for end-point RMS values. The RAC diet did not change end-point RMS values in the DT or TLH ( > 0.37); however, the diet tended to decrease and increase end-point RMS in the ST and TFL, respectively ( 0.10). Muscles of RAC+ barrows tended to have less type I fibers and more capillaries per fiber ( < 0.07). Type I and IIA fibers of RAC+ barrows were larger ( < 0.07). Compared with all other muscles, the ST had more ( < 0.01) type IIB fibers and larger type I, IIA, and IIX fibers ( < 0.01). Type I, IIA, and IIX fibers of the ST also contained less SDH compared with the other muscles ( < 0.01). Barrows fed a RAC diet had increased time to subjective exhaustion due to loss of active muscle fibers in the ST, possibly due

  12. Management factors affecting mortality, feed intake and feed conversion ratio of grow-finishing pigs.

    Science.gov (United States)

    Agostini, P S; Fahey, A G; Manzanilla, E G; O'Doherty, J V; de Blas, C; Gasa, J

    2014-08-01

    The aim of this study was to determine the effect of animal management and farm facilities on total feed intake (TFI), feed conversion ratio (FCR) and mortality rate (MORT) of grower-finishing pigs. In total, 310 batches from 244 grower-finishing farms, consisting of 454 855 Pietrain sired pigs in six Spanish pig companies were used. Data collection consisted of a survey on management practices (season of placement, split-sex by pens, number of pig origins, water source in the farm, initial or final BW) and facilities (floor, feeder, ventilation or number of animals placed) during 2008 and 2009. Results indicated that batches of pigs placed between January and March had higher TFI (P=0.006), FCR (P=0.005) and MORT (P=0.03) than those placed between July and September. Moreover, batches of pigs placed between April and June had lower MORT (P=0.003) than those placed between January and March. Batches which had split-sex pens had lower TFI (P=0.001) and better FCR (P<0.001) than those with mixed-sex in pens; pigs fed with a single-space feeder with incorporated drinker also had the lowest TFI (P<0.001) and best FCR (P<0.001) in comparison to single and multi-space feeders without a drinker. Pigs placed in pens with <50% slatted floors presented an improvement in FCR (P<0.05) than pens with 50% or more slatted floors. Batches filled with pigs from multiple origins had higher MORT (P<0.001) than those from a single origin. Pigs housed in barns that performed manual ventilation control presented higher MORT (P<0.001) in comparison to automatic ventilation. The regression analysis also indicated that pigs which entered to grower-finisher facilities with higher initial BW had lower MORT (P<0.05) and finally pigs which were sent to slaughterhouse with a higher final BW presented higher TFI (P<0.001). The variables selected for each dependent variable explained 61.9%, 24.8% and 20.4% of the total variability for TFI, FCR and MORT, respectively. This study indicates that

  13. Relative growth of carcass tissues of goat kids from five breed Types finished on pasture or feedlot

    OpenAIRE

    Raquel Vasconcelos Lourençon; Heraldo Cesar Gonçalves; Paulo Roberto Lima Meirelles; Richard Browning Junior; Maria Lenira Leite-Browning; Andréia Cristina Toniolo Chávari; Raquel Ornelas Marques; Gil Ignacio Lara Canizares; Natalia Santos Leal; Helen Fernanda Barros Gomes

    2016-01-01

    The aim of this study was to evaluate the effect of cross breeding, finishing system, and gender on the relative growth of carcass tissues of dairy kids. Seventy eight kids (39 male and 39 female) from five breed types were used: Alpine; ½ Boer + ½ Alpine (½ BA); ½ Nubian + ½ Alpine (½ ANA); ¾ Boer + ¼ Alpine (¾ BA); and ½ Nubian + ¼ Boer + ¼ Alpine (TC). Kids were distributed into two finishing systems: in pasture with doe (FS1) and weaned in feedlot (FS2). Kids were slaughtered at a mean ag...

  14. Auto-recognition of surfaces and auto-generation of material removal volume for finishing process

    Science.gov (United States)

    Kataraki, Pramod S.; Salman Abu Mansor, Mohd

    2018-03-01

    Auto-recognition of a surface and auto-generation of material removal volumes for the so recognised surfaces has become a need to achieve successful downstream manufacturing activities like automated process planning and scheduling. Few researchers have contributed to generation of material removal volume for a product but resulted in material removal volume discontinuity between two adjacent material removal volumes generated from two adjacent faces that form convex geometry. The need for limitation free material removal volume generation was attempted and an algorithm that automatically recognises computer aided design (CAD) model’s surface and also auto-generate material removal volume for finishing process of the recognised surfaces was developed. The surfaces of CAD model are successfully recognised by the developed algorithm and required material removal volume is obtained. The material removal volume discontinuity limitation that occurred in fewer studies is eliminated.

  15. Evaluating an Exterior Insulation and Finish System for Deep Energy Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Dentz, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Podorson, David [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-01-01

    Exterior insulation and finish systems (EIFS) are proprietary synthetic formulations that are applied to the exterior walls of buildings to serve as insulation and exterior cladding. The insulation thickness can vary from less than one inch to a foot or more. In this project the applicability of EIFS for residential deep energy retrofits was investigated through modeling and a case study home. The home was retrofitted using a site-applied four-inch-thick EIFS. Site-specific details were developed as required for the residential retrofit application. Site work and the costs of the EIFS system were documented. The demonstration home was modeled using Building Energy Optimization energy and cost analysis software to explore cost effectiveness of various EIFS insulation thicknesses in two climate locations.

  16. Characterization of past and present solid waste streams from the plutonium finishing plant

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, D.R.; Mayancsik, B.A. [Westinghouse Hanford Co., Richland, WA (United States); Pottmeyer, J.A.; Vejvoda, E.J.; Reddick, J.A.; Sheldon, K.M.; Weyns, M.I. [Los Alamos Technical Associates, Kennewick, WA (United States)

    1993-02-01

    During the next two decades the transuranic (TRU) wastes now stored in the burial trenches and storage facilities at the Hanford Site are to be retrieved, processed at the Waste Receiving and Processing (WRAP) Facility, and shipped to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico for final disposal. Over 50% of the TRU waste to be retrieved for shipment to the WIPP has been generated at the Plutonium Finishing Plant (PFP), also known as the Plutonium Processing and Storage Facility and Z Plant. The purpose of this report is to characterize the radioactive solid wastes generated by the PFP since its construction in 1947 using process knowledge, existing records, and history-obtained from interviews. The PFP is currently operated by Westinghouse Hanford Company (WHC) for the US Department of Energy (DOE).

  17. The effects of surface finish and grain size on the strength of sintered silicon carbide

    Science.gov (United States)

    You, Y. H.; Kim, Y. W.; Lee, J. G.; Kim, C. H.

    1985-01-01

    The effects of surface treatment and microstructure, especially abnormal grain growth, on the strength of sintered SiC were studied. The surfaces of sintered SiC were treated with 400, 800 and 1200 grit diamond wheels. Grain growth was induced by increasing the sintering times at 2050 C. The beta to alpha transformation occurred during the sintering of beta-phase starting materials and was often accompanied by abnormal grain growth. The overall strength distributions were established using Weibull statistics. The strength of the sintered SiC is limited by extrinsic surface flaws in normal-sintered specimens. The finer the surface finish and grain size, the higher the strength. But the strength of abnormal sintering specimens is limited by the abnormally grown large tabular grains. The Weibull modulus increases with decreasing grain size and decreasing grit size for grinding.

  18. Importance of chip selection and elaboration process on the aromatic composition of finished wines.

    Science.gov (United States)

    Rodríguez-Bencomo, Juan J; Ortega-Heras, Miriam; Pérez-Magariño, Silvia; González-Huerta, Carlos; González-San José, M Luisa

    2008-07-09

    The evolution of volatile compounds extracted from wood while being macerated for 1 month with four different commercial chips (different geographical origins and toasting degrees) was studied. Furthermore, the effect of the microoxygenation process between alcoholic and malolactic fermentation also was studied. The wood volatile compounds in wines macerated with the four types of chips evolved in the same way. However, the amounts of compounds extracted depended on the type of chip used. There were differences in the levels of vanillin, cis-whiskey lactone, furfural, trans-isoeugenol, and cis-isoeugenol in wines in accordance with the type of wood chips (French or American), and the last two compounds along with 5-methyl furfural presented differences that were directly related to the toast level. However, no effects of microoxygenation treatment on the extraction of volatile compounds extracted from chips were observed. Therefore, the results obtained in this study highlight the importance of chip selection on the aromatic characteristics of finished wines.

  19. Project plan international atomic energy agency (IAEA) safeguards project plutonium finishing plant; TOPICAL

    International Nuclear Information System (INIS)

    BARTLETT, W.D.

    1999-01-01

    This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) International Atomic Energy Agency (IAEA) project. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the PFP Integrated Project Management Plan (PMP), HNF-3617,Rev. 0. This project plan is the top-level definitive project management document for the PFP IAEA project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the IAEA project. Any deviations to the document must be authorized through the appropriate change control process

  20. Energy costs of feeding excess protein from corn-based by-products to finishing cattle.

    Science.gov (United States)

    Jennings, Jenny S; Meyer, Beverly E; Guiroy, Pablo J; Cole, N Andy

    2018-03-06

    The increased use of by-products in finishing diets for cattle leads to diets that contain greater concentrations of crude protein (CP) and metabolizable protein (MP) than required. The hypothesis was that excess dietary CP and MP would increase maintenance energy requirements because of the energy costs of removing excess N as urea in urine. To evaluate the potential efficiency lost, two experiments were performed to determine the effects of feeding excess CP and MP to calves fed a finishing diet at 1 × maintenance energy intake (Exp. 1) and at 2 × maintenance intake (Exp. 2). In each experiment, eight crossbred Angus-based steers were assigned to two dietary treatments in a switchback design with three periods. Treatments were steam-flaked corn-based finishing diets with two dietary protein concentrations, 13.8% CP/9.63% MP (CON) or 19.5% CP/14.14% MP (dry matter basis; ECP), containing corn gluten meal to reflect a diet with excess CP and MP from corn by-products. Each period was 27 d in length with a 19-d dietary adaptation period in outdoor individual pens followed by a 4-d sample collection in one of four open circuit respiration chambers, 2-d fast in outdoor pen, and 2-d fast in one of four respiration chambers. Energy metabolism, diet digestibility, carbon (C) and nitrogen (N) balance, oxygen consumption, and carbon dioxide and methane production were measured. At both levels of intake, digestible energy as a proportion of gross energy (GE) tended to be greater (P < 0.06) in ECP than in CON steers. Metabolizable energy (ME) as a proportion of GE tended to be greater (P = 0.08) in the ECP steers than in the CON steers at 2 × maintenance intake. At 1 × and 2 × maintenance intake, urinary N excretion (g/d) was greater (P < 0.01) in the ECP steers than the CON steers. Heat production as a proportion of ME intake at 1 × maintenance tended (P = 0.06) to be greater for CON than for ECP (90.9% vs. 87.0% for CON and ECP, respectively); however, at 2

  1. Influence of the Cutting Conditions in the Surface Finishing of Turned Pieces of Titanium Alloys

    Science.gov (United States)

    Huerta, M.; Arroyo, P.; Sánchez Carrilero, M.; Álvarez, M.; Salguero, J.; Marcos, M.

    2009-11-01

    Titanium is a material that, despite its high cost, is increasingly being introduced in the aerospace industry due to both, its weight, its mechanical properties and its corrosion potential, very close to that of carbon fiber based composite material. This fact allows using Ti to form Fiber Metal Laminates Machining operations are usually used in the manufacturing processes of Ti based aerospace structural elements. These elements must be machined under high surface finish requirements. Previous works have shown the relationship between the surface roughness and the tool changes in the first instants of turning processes. From these results, new tests have been performed in an aeronautical factory, in order to analyse roughness in final pieces.

  2. A 1.4 meter electron curing system for the finishing of sheet wood products

    International Nuclear Information System (INIS)

    French, D.; Quintal, B.S.; Nablo, S.V.

    1981-01-01

    The advantages of high performance electron curable clear and pigmented topcoats, suitable for both wood and paper application, have been known for some time. Since 1978, great progress has also been made in the application of this technology to laminating for the flexible web converting industry. The combination of these systems with a single electron curing station offers the opportunity for 'single-pass' finishing of laminated board which performs both the lamination and topcoat steps in-line. A system is described which is used for the simultaneous laminating and topcoating of printed paper or vinyl to board. The performance specifications of both the curing unit, and of typical topcoats and adhesives used with this system, will be discussed. The provisions required for inerting and venting of the processor zone when using these 100% reactive coatings will also be presented. (author)

  3. Interiors Construction Manual integrated planning, finishing and fitting out, technical servcies

    CERN Document Server

    Hausladen, Gerhard

    2010-01-01

    Soccer stadiums, airports, theaters, museums it falls to very few architects to tackle spectacular building tasks like these. The everyday work of most architects is more often focused on ""manageable"" projects like the renovation, remodeling, or rebuilding of single- and multi-family houses, schools, and offices. Whatever the nature of the building task, interior construction is always a significant design and qualitative challenge that calls for highly detailed technical expertise. After all, it affects the realm that will be brought to life and utilized by the user when the task is finished, and whose aesthetic and functional serviceability will be put to the test each and every day. The Interior Construction Manual supports planners in their daily work as a practical planning aid and reference work with the relevant standards, guidelines, reference details, and constructional solutions, all illustrated by built example projects. It brings together the crucial facts on all aspects of interior construction...

  4. Specification of the surface figure and finish of optical elements in terms of system performance

    International Nuclear Information System (INIS)

    Church, E.L.; Takacs, P.Z.

    1992-09-01

    Brookhaven National Laboratory is the site of the National Synchrotron Light Source (NSLS); an electron synchrotron which is an intense source of hard and soft x-rays. Since there are no effective refracting elements for x rays, this radiation must be manipulated and focused by mirrors configured to give high reflectivity. This paper describes methods of predicting the degradation of the performance of a simple imaging system in terms of the statistics of the shape errors of the focusing element, and conversely, of specifying those statistics in terms of requirements on image quality. Results are illustrated for a normal-incidence x-ray mirrors having figure errors plus conventional and/or fractal finish errors

  5. Effects of increasing dietary standardized ileal digestible lysine for gilts grown in a commercial finishing environment.

    Science.gov (United States)

    Shelton, N W; Tokach, M D; Dritz, S S; Goodband, R D; Nelssen, J L; DeRouchey, J M

    2011-11-01

    Three experiments were conducted to determine the effects of increasing dietary standardized ileal digestible (SID) Lys on growing and finishing gilts. Diets in all 3 experiments were corn-soybean meal-based and contained 0.15% l-Lys•HCl and 3% added fat from choice white grease. Desired SID Lys concentrations were achieved by altering levels of corn and soybean meal in the diet. Each experiment consisted of 6 treatments with 7 pens per treatment and approximately 27 gilts (PIC 337 × 1050) per pen. In Exp. 1, 1,085 gilts (initially 38.2 kg) were fed diets formulated to contain SID Lys concentrations of 0.7, 0.8, 0.9, 1.0, 1.1, or 1.2% for 28 d, which were analyzed to be total Lys concentrations of 0.78, 0.86, 0.99, 1.06, 1.14, and 1.24%, respectively. As SID Lys increased, ADG and G:F improved (quadratic, P Gilts in this trial required approximately 21.8 g of SID Lys intake per kilogram of BW gain from 38 to 65 kg. In Exp. 2, 1,092 (initially 55.2 kg) gilts were fed diets formulated to contain SID Lys concentrations of 0.66, 0.74, 0.82, 0.90, 0.98, or 1.06% for 28 d, which were analyzed to be total Lys concentrations of 0.75, 0.73, 0.84, 0.90, 0.95, and 0.97%, respectively. Both ADG (quadratic, P = 0.12) and G:F improved (linear, P Gilts in this trial required approximately 19.6 g of SID Lys per kilogram of BW gain from 55 to 80 kg. In Exp. 3, 1,080 gilts (initially 84.1 kg) were fed diets formulated to contain SID Lys concentrations of 0.54, 0.61, 0.68, 0.75, 0.82, or 0.89% for 29 d, which were analyzed to be total Lys concentrations of 0.62, 0.92, 0.79, 0.99, 0.93, and 1.07%, respectively. As the SID Lys concentration increased, ADG and G:F improved (linear, P Gilts in this trial required 23.0 g of SID Lys per kg of BW gain from 85 to 110 kg. The ideal SID Lys:ME ratio was based on the requirement determined by broken-line analysis in Exp. 1, 2, and 3, with the greatest level being tested in Exp. 3. This equation, SID Lys:ME ratio = -0.011 × BW, kg + 3

  6. Catalytic aided electrical discharge machining of polycrystalline diamond - parameter analysis of finishing condition

    Science.gov (United States)

    Haikal Ahmad, M. A.; Zulafif Rahim, M.; Fauzi, M. F. Mohd; Abdullah, Aslam; Omar, Z.; Ding, Songlin; Ismail, A. E.; Rasidi Ibrahim, M.

    2018-01-01

    Polycrystalline diamond (PCD) is regarded as among the hardest material in the world. Electrical Discharge Machining (EDM) typically used to machine this material because of its non-contact process nature. This investigation was purposely done to compare the EDM performances of PCD when using normal electrode of copper (Cu) and newly proposed graphitization catalyst electrode of copper nickel (CuNi). Two level full factorial design of experiment with 4 center points technique was used to study the influence of main and interaction effects of the machining parameter namely; pulse-on, pulse-off, sparking current, and electrode materials (categorical factor). The paper shows interesting discovery in which the newly proposed electrode presented positive impact to the machining performance. With the same machining parameters of finishing, CuNi delivered more than 100% better in Ra and MRR than ordinary Cu electrode.

  7. The effect of finishing sealant augmented margins in class V cavities

    International Nuclear Information System (INIS)

    AlTahawi, Hamdi Mohammed

    1989-01-01

    Class V cavities in the buccal and tingual aspects of human posterior teeth were acid etched and restored in one of two ways. In the extended primer technique, the UV polymerized primer coat was extended 2-3 mm beyond the cavity, then finished back. In the butt-joint technique, the primer coat was extended to just below the cavosurface line angle. Eight specimens for each technique were prepared and tested. A surface micro-analyzer capable of detecting one microinch surface roughness was used to determine the variance in marginal smoothness margins were also examined using a scanning electron microscope. No statistical difference in smoothness was detected between the two techniques. (author)

  8. Economic viability of crude glycerin in diets for lambs finished in feedlot

    Directory of Open Access Journals (Sweden)

    Mauriceia Costa Carvalho Barros

    2015-02-01

    Full Text Available The aim was to evaluate the economic viability of increasing levels of crude glycerin (CG in diets for finishing lambs. The trial was carried out at Southwest State University of Bahia, Itapetinga-BA. Twenty five crossbred, Santa Inês x Dorper, with 24 ± 2,0 kg, were housed in individual pens. The experimental design was completely randomized with five treatments and five replications. Treatments consisted of increasing levels of dietary CG (0, 2.65, 5.33, 8.06 and 10.84% and the roughage used was the Tifton 85 hay. Diets were formulated to meet the nutritional requeriments, aiming a gain of 200 g day-1. The analysis was based on use of economic indicators Net Present Value (NPV and Internal Rate of Return (IRR. The animals dry matter intake decreased linearly (P0.05 on performance and meat production results. None of the treatments showed economic viability.

  9. The association between disease and profitability in individual finishing boars at a test station

    DEFF Research Database (Denmark)

    Jensen, Tina Birk; Baadsgaard, Niels Peter; Houe, Hans

    2008-01-01

    Endemic diseases in finisher herds are considered to be costly for the pig producer. We investigated the effect of diseases on the profit margin using data from a Danish boar test station (n = 5777) collected from July 2002 to December 2004. Boars reaching a target slaughter weight of at least 80...... a reduction in the range from 0.54 to 2.41 € (corresponding to a reduction in the profit margin ranging from 4 to 20%). The results were robust to changes in price of a 30 kilogram piglet and, relatively robust in regard to changes in the feed price. However, price per kilogram carcass weight appeared...... to influence the economic effect of oral and parenteral treatment and pathological findings on the profit margin. The effect of oral and parenteral treatments was also sensitive to changes in medicine prices....

  10. Reflections: Neurology and The Humanities. The case of the locked house. The finished mystery.

    Science.gov (United States)

    Joynt, Robert J; Kempster, Peter A; Lee, Andrew J

    2014-08-12

    After the death in 2012 of Dr. Robert Joynt, who served Neurology® as CPC Section Editor, an unfinished manuscript was found on his computer. It would have been his sixth Sherlock Holmes pastiche. Intrigued by the story but deflated at the lack of an ending, the editors published the case in the September 10, 2013, issue of Neurology and requested that readers finish it. A panel of editors reviewed over 30 submissions and the top 4 were posted online and on the iPad. Readers voted online, on the iPad, and during the 2014 American Academy of Neurology Annual Meeting in Philadelphia. The winning coauthors are Peter A. Kempster, from Melbourne, and Andrew J. Lees, from London. The runners-up are Anonymous (ending 1), Gerald Honch (ending 2), and Clifton Gooch (ending 4). The editors thank all participants and voters. The rule on page 662 indicates where the winning ending begins.

  11. Total Measurement Uncertainty for the Plutonium Finishing Plant (PFP) Segmented Gamma Scan Assay System

    CERN Document Server

    Fazzari, D M

    2001-01-01

    This report presents the results of an evaluation of the Total Measurement Uncertainty (TMU) for the Canberra manufactured Segmented Gamma Scanner Assay System (SGSAS) as employed at the Hanford Plutonium Finishing Plant (PFP). In this document, TMU embodies the combined uncertainties due to all of the individual random and systematic sources of measurement uncertainty. It includes uncertainties arising from corrections and factors applied to the analysis of transuranic waste to compensate for inhomogeneities and interferences from the waste matrix and radioactive components. These include uncertainty components for any assumptions contained in the calibration of the system or computation of the data. Uncertainties are propagated at 1 sigma. The final total measurement uncertainty value is reported at the 95% confidence level. The SGSAS is a gamma assay system that is used to assay plutonium and uranium waste. The SGSAS system can be used in a stand-alone mode to perform the NDA characterization of a containe...

  12. Cyclodextrin and maltodextrin finishing of a polypropylene abdominal wall implant for the prolonged delivery of ciprofloxacin.

    Science.gov (United States)

    Laurent, T; Kacem, I; Blanchemain, N; Cazaux, F; Neut, C; Hildebrand, H F; Martel, B

    2011-08-01

    The aim of this work was to develop a polypropylene (PP) artificial abdominal wall implant for the prolonged release of ciprofloxacin (CFX). This sustained release effect was obtained by functionalization of the textile mesh with citric acid and hydroxypropyl-γ-cyclodextrin (HPγCD) or maltodextrin (MD). In both cases the textile finishing reaction yielded a cyclo- or malto-dextrin crosslinked polymer coating the fibers. The modified supports were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry and scanning electron microscopy. The sorption capacities and the kinetics of CFX release were studied by batch tests coupled with spectrophotometric assays. Microbiological assays were carried out on Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli, while proliferation and viability tests used fibroblasts. The main results were as follows. (i) Due to the differences between the range of temperature of thermal degradation of the (cyclo)dextrins polymers and of the PP fibers TGA was a reliable method for quantifying the degree of functionalization of the textiles. (ii) Both modified supports showed improved sorption/desorption capacities for CFX, compared with the virgin mesh. The HPγCD-finished support showed an increased sorption capacity and a lower release rate of CFX compared with the MD modified support. (iii) Microbiological assays confirmed the latter result, with greater sustained antibacterial activity of the HPγCD treated support. These experiments have demonstrated the role of the cyclodextrin cavity in interactions with CFX: the antibiotic was not only adsorbed via hydrogen and acid-base interactions with the polyCTR-HPγCD network, but also via host-guest complexation. (iv) Biological tests revealed a slight decrease in fibroblast proliferation after 6 days on the modified supports, but cell viability tests showed that this was not due to toxicity of the (cyclo)dextrin polymer coatings. Copyright

  13. Feeding behavior of growing-finishing pigs reared under precision feeding strategies.

    Science.gov (United States)

    Andretta, I; Pomar, C; Kipper, M; Hauschild, L; Rivest, J

    2016-07-01

    The feeding behavior of growing-finishing pigs reared under precision feeding strategies was studied in 35 barrows and 35 females (average initial BW of 30.4 ± 2.2 kg) over 84 d. Five different feeding programs were evaluated, namely a conventional 3-phase program in which pigs were fed with a constant blend of diet A (high nutrient density) and diet B (low nutrient density) and 4 daily phase-feeding programs in which pigs were fed daily with a blend meeting 110, 100, 90, or 80% of the individual Lys requirements. Electronic feeder systems automatically recorded the visits to the feeder, the time of the meals, and the amount of feed consumed per meal. The trial lasted 84 d and the database contained 59,701 feeder visits. The recorded database was used to calculate the number of meals per day, feeding time per meal (min), intervals between meals (min), feed intake per meal (g), and feed consumption rate (feed intake divided by feeding time per meal, expressed in g/min) of each animal. The feeding pattern was predominantly diurnal (73% of the feeder visits). Number of meals, duration of meals, time between meals, feed consumed per meal, and feed consumption rate were not affected by the feeding programs. The females ingested 19% less feed per meal and had a 6% lower feed consumption rate in comparison with the barrows ( feeding behavior was not correlated with diet composition. However, feed efficiency was negatively correlated with amount of feed consumed per meal ( = -0.38, feed consumption rate ( = -0.44, Feed consumption rate was also negatively correlated with protein efficiency ( = -0.44, feed consumption rate and number of meals per day are the variables related most closely to pig production performance results. Current results indicate that using precision feeding as an approach to reduce Lys intake does not interfere with the feeding behavior of growing-finishing pigs.

  14. The chemistry of tributyl phosphate at elevated temperatures in the Plutonium Finishing Plant Process Vessels

    International Nuclear Information System (INIS)

    Barney, G.S.; Cooper, T.D.

    1994-01-01

    Potentially violent chemical reactions of the tributyl phosphate solvent used by the Plutonium Finishing Plant at the Hanford Site were investigated. There is a small probability that a significant quantity of this solvent could be accidental transferred to heated process vessels and react there with nitric acid or plutonium nitrate also present in the solvent extraction process. The results of laboratory studies of the reactions show that exothermic oxidation of tributyl phosphate by either nitric acid or actinide nitrates is slow at temperatures expected in the heated vessels. Less than four percent of the tributyl phosphate will be oxidized in these vented vessels at temperatures between 125 degrees C and 250 degrees C because the oxidant will be lost from the vessels by vaporization or decomposition before the tributyl phosphate can be extensively oxidized. The net amounts of heat generated by oxidation with concentrated nitric acid and with thorium nitrate (a stand-in for plutonium nitrate) were determined to be about -150 and -220 joules per gram of tributyl phosphate initially present, respectively. This is not enough heat to cause violent reactions in the vessels. Pyrolysis of the tributyl phosphate occurred in these mixtures at temperatures of 110 degrees C to 270 degrees C and produced mainly 1-butene gas, water, and pyrophosphoric acid. Butene gas generation is slow at expected process vessel temperatures, but the rate is faster at higher temperatures. At 252 degrees C the rate of butene gas generated was 0.33 g butene/min/g of tributyl phosphate present. The measured heat absorbed by the pyrolysis reaction was 228 J/g of tributyl phosphate initially present (or 14.5 kcal/mole of tributyl phosphate). Release of flammable butene gas into process areas where it could ignite appears to be the most serious safety consideration for the Plutonium Finishing Plant

  15. The chemistry of tributyl phosphate at elevated temperatures in the Plutonium Finishing Plant Process Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Barney, G.S.; Cooper, T.D.

    1994-06-01

    Potentially violent chemical reactions of the tributyl phosphate solvent used by the Plutonium Finishing Plant at the Hanford Site were investigated. There is a small probability that a significant quantity of this solvent could be accidental transferred to heated process vessels and react there with nitric acid or plutonium nitrate also present in the solvent extraction process. The results of laboratory studies of the reactions show that exothermic oxidation of tributyl phosphate by either nitric acid or actinide nitrates is slow at temperatures expected in the heated vessels. Less than four percent of the tributyl phosphate will be oxidized in these vented vessels at temperatures between 125{degrees}C and 250{degrees}C because the oxidant will be lost from the vessels by vaporization or decomposition before the tributyl phosphate can be extensively oxidized. The net amounts of heat generated by oxidation with concentrated nitric acid and with thorium nitrate (a stand-in for plutonium nitrate) were determined to be about -150 and -220 joules per gram of tributyl phosphate initially present, respectively. This is not enough heat to cause violent reactions in the vessels. Pyrolysis of the tributyl phosphate occurred in these mixtures at temperatures of 110{degrees}C to 270{degrees}C and produced mainly 1-butene gas, water, and pyrophosphoric acid. Butene gas generation is slow at expected process vessel temperatures, but the rate is faster at higher temperatures. At 252{degrees}C the rate of butene gas generated was 0.33 g butene/min/g of tributyl phosphate present. The measured heat absorbed by the pyrolysis reaction was 228 J/g of tributyl phosphate initially present (or 14.5 kcal/mole of tributyl phosphate). Release of flammable butene gas into process areas where it could ignite appears to be the most serious safety consideration for the Plutonium Finishing Plant.

  16. Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion.

    Science.gov (United States)

    Aykent, Filiz; Yondem, Isa; Ozyesil, Atilla G; Gunal, Solen K; Avunduk, Mustafa C; Ozkan, Semiha

    2010-04-01

    The formation of biofilm and bacterial accumulation on dental materials may lead to the development of gingival inflammation and secondary caries. The purpose of this study was to examine the effect of different surface finishing and polishing methods on surface roughness and the adhesion of S. mutans bacteria to 2 new-generation indirect composite resins, 1 direct composite resin, and 1 ceramic material. Forty specimens (10 x 10 x 2 mm) of each material, indirect composite resins (SR Adoro, Estenia), direct composite resin (Tetric), and a ceramic material (VITABLOCS Mark II), were fabricated. Specimens were divided into 4 groups (n=10) that were treated with 1 of the following 4 surface finishing techniques: diamond rotary cutting instrument, sandpaper discs (Sof-Lex), silicone-carbide rubber points (Shofu), or a felt wheel with diamond paste. Surface roughness was measured with a profilometer. Test specimens were covered with artificial saliva and mucin to produce pellicle. Bacterial suspension (10(9) CFU/ml) was then added to the pellicle-coated specimens, and bacterial adhesion was determined using a confocal laser microscope and image analyzing program. Data were analyzed with 2-way ANOVA, followed by Tukey HSD test, Pearson correlation, and regression analysis (alpha=.05). The highest surface roughness values were recorded in SR Adoro and diamond rotary cutting instrument groups. The lowest vital S. mutans adhesion was seen in the ceramic group and in SR Adoro indirect composite resin (Padhesion to indirect composite resin materials differed from that to ceramic material after surface treatments. A positive correlation was observed between surface roughness and the vital S. mutans adhesion. Copyright 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  17. Evaluation of Digestible lysine levels in diets with high energy density for finishing pigs

    Directory of Open Access Journals (Sweden)

    Janeth Colina R

    2015-05-01

    Full Text Available ABSTRACT Objective. To evaluate the effects of different levels of digestible lysine in diets with high energy density on productive performance and carcass characteristics of finishing pigs. Materials and Methods. Seventy crossbred barrows (initial body weight of 83.36 kg were used and allotted in a randomized block design with five treatments, seven replications and two pigs per experimental unit. Pigs were fed ad libitum with diets containing 3.5 kcal/kg of ME and five levels of digestible lysine (0.46, 0.52, 0.58, 0.64 and 0.70% during four weeks. Final live weight (FLW, daily feed intake (DFI, daily weight gain (DWG, feed conversion (FC, daily lysine intake (DLI, and the amount of lysine per body weight gain (DLI/DWG, were evaluated. At the end of the experiment, blood samples were taken from each pig to determine urea nitrogen concentration (UN in serum and slaughtered to evaluate quantitative and qualitative carcass characteristics. Results. The FLW increased linearly (p<0.05.There were no differences among treatments for DFI, DWG, FC, carcass characteristics and UN. The DLI and DLI/DWG varied significantly (p<0.001 and increased linearly (p<0.001 with each lysine level. Pigs that consumed the limiting diet in lysine (0.46% showed less DLI and DLI/DWG (p<0.001 than pigs fed the other diets. Conclusions. The amount of DLI/DWG increased with the evaluated levels of digestible lysine in diets with high energy density, without effects on productive performance and carcass characteristics of finishing pigs.

  18. Advancements in the Interferometric Measurements of Real Time Finishing Birefringent Filter's Crystal Plates

    International Nuclear Information System (INIS)

    Gan, Ma; Kushtal, Gi; Skomorovsky, Vi; Domyshev, Gn; Sadokhin, Vp

    2006-01-01

    The finishing of birefringent plates consists of two processes: polishing and evaluation of a surface, which have been performed separately till now. The purpose of this work is achieving of high accuracy of the evaluation and machining of the plane-parallel plates from birefringent crystals, in particular of crystal plates of birefringent filters during their finishing. The developed process combines evaluation and polishing in an interactive way. We have found modes of treatment, shape of polisher, have designed interferometer, with a mirror arranged in polisher. Visual checking of optical thickness comparatively with reference plate was carried out using the interference fringes of equal birefringence, and checking of an optical wedge - by interference rings of an equal inclination. The automated processing of TV camera interference fringes was impossible, because of gaps of interference fringes on polishing cells above the mirror. Therefore a special software was developed for processing of a complex fringe pattern interferogram. Software FastInterf uses furrier analysis technique which allows to process an interferogram with multiply gaps. Interferograms are registered by a high resolution TV camera (1280 x1024). Automatic processing of a fringe interferogram using FastInterf software takes less then one second. The influence of gaps is excluded, and the flat field is taken into account. Software provides full 3D surface and wavefront maps. Aberration analysis of a wavefront gives information on thickness of a plate comparatively with a reference one, optical wedge of plate and azimuth of an inclination of wave front. Moreover, software provides a control of surface quality. The measuring device, features of the software are described and process of interferometric evaluation during polishing is illustrated

  19. Effects of Roughing on Finish Rolling Simulations in Microalloyed Strip Steels

    Science.gov (United States)

    Chalimba, S. A. J.; Mostert, R. J.; Stumpf, W. E.; Siyasiya, C. W.; Banks, K. M.

    2017-11-01

    The effects of a roughing pass in hot rolling simulations were assessed in VN and Nb-Ti steels. Continuous cooling phase transformation temperatures, flow curves, softening mechanisms (dynamic transformation DT and dynamic recrystallization DRX), and deformed microstructure morphologies were analyzed. The application of one or more roughing passes eliminates the effects of prior microstructural history and ensures that all stock material experiences equivalent hot working conditions and state of the microalloying elements. It has been shown that roughing in hot simulation has the following positive influences: (1) provide more reliable flow stress data; (2) give greater consistencies and accuracy in analysis of softening mechanisms giving three distinct regimes (DT regime at temperatures below 800 °C, DT/DRX inter-mode regime between 800 and 950 °C and DRX regime for temperatures above 950 °C for VN steel); (3) promotion of softening mechanisms as evidence by low critical strains (ɛ_{{{c} {DT}}} was within the range 0.08-0.12, while for finishing-only pass, the ɛ_{{{c} {DT}}} was in the range of 0.11-0.14 at \\dot{ɛ } = 0.1 s-1); (4) for roughing and finishing schedules, DT was verified to occur at temperatures 117 and 133 °C above Ae3 for VN steel and Nb-Ti steel, respectively, compared to the F-only schedules which showed that DT can only occur at temperatures below the Ae3; (5) RF schedules promoted uniform microstructural morphologies compared to inhomogeneous microstructures realized in F-only schedules.

  20. Qualitative feed restriction for late finishing pigs on meat quality and fatty acid profile

    Directory of Open Access Journals (Sweden)

    Apauliana Daniela Lima da Silva

    2016-09-01

    Full Text Available The aim of this study was to evaluate the effects of including cashew bagasse bran (CBB as a food ingredient in qualitative feed restriction programs on the carcass traits and meat quality of barrows and gilts. Twenty–four crossbred pigs (12 barrows and 12 gilts were used, with an average initial body weight of 57.93 ± 3.67 kg/LW. The experimental design was a randomized block 3x2 factorial arrangement with three levels (0%, 15% and 30% CBB, two sexes (barrows and gilts and four repetitions. The treatments were composed of the basal diet (BD formulated with corn, soybean meal and a commercial base mix for finishing pigs, to which different levels of CBB were added. At the end of the trial period, the animals were slaughtered for the evaluation of the meat quality and carcass traits. The inclusion of CBB in the diets did not affect the carcass traits of the gilts but affected the carcass traits of the barrow positively, increasing theyield of meat in the chilled carcass and reducing the thickness of subcutaneous fat. In the longissimus dorsi muscle and in the adipose tissue of the pigs, the myristic (C14:0, palmitoleic (C16:1, oleic (C18:1, linoleic (C18:2, linolenic (C18:3 and arachidonic (C20:4 fatty acids were evaluated, and no effect was observed (P > 0.05 from the levels of CBB in the diets. In the comparisons between the sexes, a greater concentration of C20:4 fatty acid was observed in the carcass of the gilts. In this context, CBB was considered for use as a feed ingredient in programs of qualitative feed restriction for finishing pigs.

  1. Biosecurity level and health management practices in 60 Swedish farrow-to-finish herds.

    Science.gov (United States)

    Backhans, Annette; Sjölund, Marie; Lindberg, Ann; Emanuelson, Ulf

    2015-03-12

    Biosecurity measures are important tools to maintain animal health in pig herds. Within the MINAPIG project, whose overall aim is to evaluate strategies to raise pigs with less antimicrobial use, biosecurity was evaluated in medium to large farrow-to-finish pig herds in Sweden. In 60 farrow-to-finish herds with more than 100 sows, the biosecurity level was evaluated using a previously developed protocol (BioCheck). In a detailed questionnaire, internal and external biosecurity was scored in six subcategories each. An overall score for biosecurity was also provided. Information regarding production parameters as well as gender and educational level of personnel working with the pigs was also collected. Descriptive statistics were used to examine the recorded data. The median scores for external and internal biosecurity were 68 and 59, respectively, where 0 indicates total absence of biosecurity and 100 means maximal possible biosecurity. The subcategories for external and internal biosecurity that had the highest scores were "Purchase of animals" (external) and "Nursery unit"/"Fattening unit" (internal), while "Feed, water and equipment supplies" (external) and "Measures between compartments and equipment"/"Cleaning and disinfection" (internal) received the lowest scores. A female caretaker in the farrowing unit, a farmer with fewer years of experience and more educated personnel were positively associated with higher scores for some of the external and internal subcategories. In herds with biosecurity, as well as good internal biosecurity. Strong biosecurity related to the purchase of animals, protocols for visitors, the use of all-in, all-out systems, and sanitary period between batches. Still, there is room for improvement in preventing both the introduction of disease to herds (external) and the spread of infections within herds (internal). Systems for animal transport can be improved and with respect to internal biosecurity, there is especially room for

  2. Assessment of a potential agricultural application of Bangkok-digested sewage sludge and finished compost products.

    Science.gov (United States)

    Sreesai, Siranee; Peapueng, Panadda; Tippayamongkonkun, Taninporn; Sthiannopkao, Suthipong

    2013-09-01

    A study was conducted to investigate the levels of plant nutrients, heavy metals, parasites and fecal coliform bacteria in Bangkok-produced sewage sludge and finished compost products for potential agricultural application, as well as to compare the quality of compost under different composting conditions. The results indicated that digested sewage sludge had high fertilizing values for organic matter (19.01 ± 0.09%), total nitrogen (2.17 ± 0.07%), total phosphorus (2.06 ± 0.06%) and total potassium (1.16 ± 0.22%), but it was contaminated with human pathogens, including fecal coliform bacteria, viable helminthes egg and active forms of parasite cysts. Thus, fresh sewage sludge should not be disposed on land unless it has undergone pathogen reduction. It is proven that the quality of the sludge mixed with grass clippings at a ratio of 6:1 volume/volume after having passed a windrow composting process for 8 weeks can be classified as class A biosolids as the levels of remaining fecal coliforms were compost were 16.53 ± 1.25%, 1.39 ± 0.06%, 0.42 ± 0.10% and 1.53 ± 0.05% respectively. The total copper concentration was rather high (2291.31 ± 121.77 mg kg(-1)), but all heavy metal concentrations were also well below the United States Environmental Protection Agency pollutant limits for land application. The finished compost products can be considered as a soil conditioner as they have relatively low essential plant nutrient concentrations. It is recommended to be initially used for gardening and landscaping to ensure safety utilization.

  3. Study on effect of tool electrodes on surface finish during electrical discharge machining of Nitinol

    Science.gov (United States)

    Sahu, Anshuman Kumar; Chatterjee, Suman; Nayak, Praveen Kumar; Sankar Mahapatra, Siba

    2018-03-01

    Electrical discharge machining (EDM) is a non-traditional machining process which is widely used in machining of difficult-to-machine materials. EDM process can produce complex and intrinsic shaped component made of difficult-to-machine materials, largely applied in aerospace, biomedical, die and mold making industries. To meet the required applications, the EDMed components need to possess high accuracy and excellent surface finish. In this work, EDM process is performed using Nitinol as work piece material and AlSiMg prepared by selective laser sintering (SLS) as tool electrode along with conventional copper and graphite electrodes. The SLS is a rapid prototyping (RP) method to produce complex metallic parts by additive manufacturing (AM) process. Experiments have been carried out varying different process parameters like open circuit voltage (V), discharge current (Ip), duty cycle (τ), pulse-on-time (Ton) and tool material. The surface roughness parameter like average roughness (Ra), maximum height of the profile (Rt) and average height of the profile (Rz) are measured using surface roughness measuring instrument (Talysurf). To reduce the number of experiments, design of experiment (DOE) approach like Taguchi’s L27 orthogonal array has been chosen. The surface properties of the EDM specimen are optimized by desirability function approach and the best parametric setting is reported for the EDM process. Type of tool happens to be the most significant parameter followed by interaction of tool type and duty cycle, duty cycle, discharge current and voltage. Better surface finish of EDMed specimen can be obtained with low value of voltage (V), discharge current (Ip), duty cycle (τ) and pulse on time (Ton) along with the use of AlSiMg RP electrode.

  4. Dietary Phytoncide Supplementation Improved Growth Performance and Meat Quality of Finishing Pigs

    Directory of Open Access Journals (Sweden)

    Han Lin Li

    2016-09-01

    Full Text Available We conducted this 10-wk experiment to evaluate the effects of dietary phytoncide, Korean pine extract as phytogenic feed additive (PFA, on growth performance, blood characteristics, and meat quality in finishing pigs. A total of 160 pigs ([Landrace×Yorkshire]×Duroc, body weight (BW = 58.2±1.0 kg were randomly allocated into 1 of 4 treatments according to their BW and sex, 10 replicate pens per treatment with 4 pigs per pen were used (2 barrows and 2 gilts. Dietary treatments were: CON, control diet; PT2, CON+0.02% PFA; PT4, CON+0.04% PFA; PT6, CON+0.06% PFA. Overall, average daily gain (ADG was higher in PT4 (p<0.05 than in PT6, average daily feed intake (ADFI was lower in PT6 than in CON (p<0.05. Besides ADFI decreased linearly (p<0.05 with the increased level of phytoncide and gain:feed ratio in PT4 treatment was higher (p<0.05 than CON treatment. During 5 to 10 weeks and overall, quadratic (p<0.05 effect was observed in ADG among the treatments. At the end of this experiment, pigs fed with PT4 diet had a greater (p<0.05 red blood cell concentration compared to the pigs fed CON diet. Water holding capacity increased linearly (p<0.05 with the increased level of phytoncide supplementation. Moreover, firmness, redness, yellowness, and drip loss at day 3 decreased linearly (p<0.05 with the increase in the level of phytoncide supplementation. In conclusion, inclusion of phytoncide could enhance growth performance without any adverse effects on meat quality in finishing pigs.

  5. Zilpaterol improves feeding performance and fabrication yield of concentrate-finished cull cows.

    Science.gov (United States)

    Lawrence, T E; Gasch, C A; Hutcheson, J P; Hodgen, J M

    2011-07-01

    The objective of this study was to quantify the effects of zilpaterol hydrochloride (ZH) on feeding performance and fabrication yield of concentrate-finished cull cows. Three hundred twenty commercial cull cows (2 to 10 yr old) were obtained from ranches in Missouri and South Dakota and assigned to 1 of 2 treatments: 1) a control diet containing no ZH and 2) a diet that contained ZH. Cows were fed for 75, 88, or 110 d, and all received the control ration until ZH treatments were initiated. Twenty-four days before slaughter, ZH feeding began for the designated treatment pens; cows were fed ZH [8.33 mg/kg (100% DM basis)] for 20 d with a 4-d withdrawal period before slaughter. No differences (P>0.05) were detected between the 2 treatment groups for initial BW or DMI. Final BW (640.5 vs. 619.1 kg), ADG for the last 24 d (2.75 vs. 2.17 kg), and G:F for the last 24 d (0.160 vs. 0.126) were greater (P 0.05) were found for lean or skeletal maturity score, fat thickness, LM area, HCW, or calculated yield grade among the 2 treatment groups. Feeding ZH increased (P0.07) were found for the remaining fabrication yield attributes. The ZH-treated cows had greater (Pfeeding of ZH to concentrate-finished cull cows enhances production efficiencies and can add new value to the cull cow market. © 2011 American Society of Animal Science. All rights reserved.

  6. Percent recoveries of anthropogenic organic compounds with and without the addition of ascorbic acid to preserve finished-water samples containing free chlorine, 2004-10

    Science.gov (United States)

    Valder, Joshua F.; Delzer, Gregory C.; Bender, David A.; Price, Curtis V.

    2011-01-01

    This report presents finished-water matrix-spike recoveries of 270 anthropogenic organic compounds with and without the addition of ascorbic acid to preserve water samples containing free chlorine. Percent recoveries were calculated using analytical results from a study conducted during 2004-10 for the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey (USGS). The study was intended to characterize the effect of quenching on finished-water matrix-spike recoveries and to better understand the potential oxidation and transformation of 270 anthropogenic organic compounds. The anthropogenic organic compounds studied include those on analytical schedules 1433, 2003, 2033, 2060, 2020, and 4024 of the USGS National Water Quality Laboratory. Three types of samples were collected from 34 NAWQA locations across the Nation: (1) quenched finished-water samples (not spiked), (2) quenched finished-water matrix-spike samples, and (3) nonquenched finished-water matrix-spike samples. Percent recoveries of anthropogenic organic compounds in quenched and nonquenched finished-water matrix-spike samples are presented. Comparisons of percent recoveries between quenched and nonquenched spiked samples can be used to show how quenching affects finished-water samples. A maximum of 18 surface-water and 34 groundwater quenched finished-water matrix-spike samples paired with nonquenched finished-water matrix-spike samples were analyzed. Percent recoveries for the study are presented in two ways: (1) finished-water matrix-spike samples supplied by surface-water or groundwater, and (2) by use (or source) group category for surface-water and groundwater supplies. Graphical representations of percent recoveries for the quenched and nonquenched finished-water matrix-spike samples also are presented.

  7. Innovative sol–gel route in neutral hydroalcoholic condition to obtain antibacterial cotton finishing by zinc precursor

    NARCIS (Netherlands)

    Poli, R.; Colleoni, C.; Calvimontes, A.; Polaskova, H.; Dutschk, Victoria; Rosace, G.

    2015-01-01

    In the present study, a possibility to realize a transparent sol by zinc-based precursors in a neutral medium without acidic or alkaline catalyst was investigated.Moreover, to study the influence of an inorganic–organic hybrid polymer on the proposed antibacterial finishing, the Zn-based sol was

  8. Aggression, behavior and peripheral amine concentrations in relation to ractopamine feeding, sex, and social rank of finishing pigs

    Science.gov (United States)

    The effects of the widely used feed additive ractopamine (RAC) on behavioral and physiological responses in finishing pigs are limited. Aggression is of concern for its potential to impair pig’s productivity and well-being; thus its relation with feeding of RAC, an adrenoreceptor agonist, warrants f...

  9. Identification of quantitative trait loci for carcass composition and meat quality traits in a commercial finishing cross

    NARCIS (Netherlands)

    Wijk, van H.J.; Dibbits, B.W.; Baron, E.E.; Brings, A.D.; Harlizius, B.; Groenen, M.A.M.; Knol, E.F.; Bovenhuis, H.

    2006-01-01

    A QTL study for carcass composition and meat quality traits was conducted on finisher pigs of a cross between a synthetic Pie¿train/Large White boar line and a commercial sow cross. The mapping population comprised 715 individuals evaluated for a total of 30 traits related to growth and fatness (4

  10. Improving the prediction of methane production and representation of rumen fermentation for finishing beef cattle within a mechanistic model

    NARCIS (Netherlands)

    Ellis, J.L.; Dijkstra, J.; Bannink, A.; Kebreab, E.; Archibeque, S.; Benchaar, C.; Beauchemin, K.; Nkrumah, D.J.; France, J.

    2014-01-01

    The purpose of this study was to evaluate prediction of methane emissions from finishing beef cattle using an extant mechanistic model with pH-independent or pH-dependent VFA stoichiometries, a recent stoichiometry adjustment for the use of monensin, and adaptation of the underlying model structure,

  11. An Overview of Surface Finishes and Their Role in Printed Circuit Board Solderability and Solder Joint Performance

    Energy Technology Data Exchange (ETDEWEB)

    Vianco, P.T.

    1998-10-15

    A overview has been presented on the topic of alternative surface finishes for package I/Os and circuit board features. Aspects of processability and solder joint reliability were described for the following coatings: baseline hot-dipped, plated, and plated-and-fused 100Sn and Sn-Pb coatings; Ni/Au; Pd, Ni/Pd, and Ni/Pd/Au finishes; and the recently marketed immersion Ag coatings. The Ni/Au coatings appear to provide the all-around best option in terms of solderability protection and wire bondability. Nickel/Pal ftishes offer a slightly reduced level of performance in these areas that is most likely due to variable Pd surface conditions. It is necessmy to minimize dissolved Au or Pd contents in the solder material to prevent solder joint embrittlement. Ancillary aspects that included thickness measurement techniques; the importance of finish compatibility with conformal coatings and conductive adhesives; and the need for alternative finishes for the processing of non-Pb bearing solders were discussed.

  12. Improvement of the surface finish obtained by laser ablation with a Nd: YAG laser on pre-ablated tool steel

    CSIR Research Space (South Africa)

    Steyn, J

    2007-01-01

    Full Text Available Surface finish is an important requirement for tool and die makers and remains a challenge with conventional machining technologies. Nd: YAG lasers have been utilised for many years in the area of laser marking, engraving and micro machining...

  13. 78 FR 3900 - Generic Drug User Fee-Active Pharmaceutical Ingredient and Finished Dosage Form Facility Fee...

    Science.gov (United States)

    2013-01-17

    ... March 4, 2013. FOR FURTHER INFORMATION CONTACT: David Miller, Office of Financial Management (HFA-100... reference the user fee payment ID number when completing your transfer. The originating financial...] Generic Drug User Fee--Active Pharmaceutical Ingredient and Finished Dosage Form Facility Fee Rates for...

  14. Effects of zilpaterol hydrochloride on methane production, total body oxygen consumption, and blood metabolites in finishing beef steers

    Science.gov (United States)

    An indirect calorimetry experiment was conducted to determine the effects of feeding zilpaterol hydrochloride (ZH) for 20 d on total body oxygen consumption, respiratory quotient, methane production, and blood metabolites in finishing beef steers. Sixteen Angus steers (initial BW = 555 ± 12.7 kg) w...

  15. Thermal Stability Studies of Candidate Decontamination Agents for Hanford’s Plutonium Finishing Plant Plutonium-Contaminated Gloveboxes

    Energy Technology Data Exchange (ETDEWEB)

    Scheele, Randall D.; Cooper, Thurman D.; Jones, Susan A.; Ewalt, John R.; Compton, James A.; Trent, Donald S.; Edwards, Matthew K.; Kozelisky, Anne E.; Scott, Paul A.; Minette, Michael J.

    2005-09-29

    This report provides the results of PNNL's and Fluor's studies of the thermal stabilities of potential wastes arising from decontamination of Hanford's Plutonium Finishing Plant's plutonium contaminated gloveboxes. The candidate wastes arising from the decontamination technologies ceric nitrate/nitric acid, RadPro, Glygel, and Aspigel.

  16. Recent Developments in the UltraForm Finishing and UltraSurf Measuring of Axisymmetric IR Domes

    Science.gov (United States)

    2010-06-08

    defense systems.  The integration of the UFF ( CNC controlled finishing platform) and the UltraSurf (Automated non-contact measurement device) provides a...0160 Optical Fabrication History  SX Optical CNC Machining Centers  Defense Advanced Research Projects Agency, DARPA  Developed with the Center for...

  17. Agricultural Construction Volume II. Oxy-Gas and Other Cutting/Welding Processes. Woodworking, Metals, Finishing. Instructor's Guide.

    Science.gov (United States)

    Admire, Myron; Maricle, Gary

    This guide contains instructor's materials for teaching a secondary agricultural construction course consisting of instructional units on oxy-gas and other cutting and welding processes (10 lessons), woodworking (6 lessons), metals (10 lessons), and finishing (4 lessons). The materials for each unit include student objectives, a list of…

  18. The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

    NARCIS (Netherlands)

    Bottino, Marco Antonio; Valandro, Luiz Felipe; Buso, Leondardo; Oezcan, Mutlu

    2007-01-01

    Objective: The aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials.

  19. Vochtrijke diervoeders en geuremissie uit vleesvarkensstallen = Liquid co-products and odour emission from finisher pig buildings

    NARCIS (Netherlands)

    Timmerman, M.; Riel, van J.W.; Smolders, M.M.A.H.H.; Bruininx, E.M.A.M.

    2004-01-01

    In a laboratory test, it was investigated whether the odour concentration and hedonic odour tone of coproducts differed from dry compound feed. After this, in a study at the Centre for Innovative Pig Farming Sterksel the effect of diets with coproducts on odour emissions from finisher pigs was

  20. Feed-forward and generalized regression neural networks in modeling feeding behavior of pigs in the grow-finishing phase

    Science.gov (United States)

    Feeding patterns in group-housed grow-finishing pigs have been investigated for use in management decisions, identifying sick animals, and determining genetic differences within a herd. Development of models to predict swine feeding behaviour has been limited due the large number of potential enviro...

  1. Usefulness of food chain information provided by Dutch finishing pig producers to control antibiotic residues in pork.

    Science.gov (United States)

    van Wagenberg, Coen P A; Backus, Gé B C; van der Vorst, Jack G A J; Urlings, Bert A P

    2012-11-01

    The EU prescribes that food business operators must use food chain information to assist in food safety control. This study analyses usefulness of food chain information about antibiotic usage covering the 60-day period prior to delivery of pigs to slaughter in the control of antibiotic residues in pork. A dataset with 479 test results for antibiotic residues in tissue samples of finishing pigs delivered to a Dutch slaughter company was linked to information provided by pig producers about antibiotic usage in these finishing pigs. Results show that twice as many producers reported using antibiotics in the group of 82 producers with antibiotic residues (11.0%) compared to the group without antibiotic residues (5.5%) (p=0.0686). For 89% of consignments with a finishing pig with antibiotic residues, the producer reported 'did not use antibiotics'. Food chain information about antibiotic usage provided by Dutch pig producers was no guarantee for absence of antibiotic residues in delivered finishing pigs. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Kui Savisaar oli peaminister ja Ilves ajakirjanik

    Index Scriptorium Estoniae

    2011-01-01

    Valitud katkendeid Tarmo Vahteri raamatust "Vaba riigi tulek". Tallinn, 2011. Muuhulgas on ära toodud väljavõte Raadio Vaba Euroopa Eesti toimetuse juhi Toomas Hendrik Ilvese intervjuust Edgar Savisaarega 9. mail 1991

  3. Ontwikkeling van uitloogproeven voor minerale olie. Ontwikkelingsonderzoek

    NARCIS (Netherlands)

    Broekman MH; Rood GA; Velde EG van der; Orbons AJ; Gils W van; LOC

    1996-01-01

    Within the framework of the Terms of Reference Plan for normalization commission 390 11 on 'Leaching characteristics of building and waste materials', a set of leaching tests for various organic compounds has to be developed. This document contains results of investigations performed for the

  4. Kas Huntington oli prohvet? / Priit Simson

    Index Scriptorium Estoniae

    Simson Priit, 1977-

    2008-01-01

    Autor käsitleb Samuel Huntingtoni teese ning leiab, et tegelikult Huntington ei pakkunud õigustust islamiriikide ründamisele, vaid pigem hoiatas tsivilisatsioonide siseasjusse sekkumise, tekkida võiva ahelreaktsiooni eest, kus üks tsivilisatsiooni liige tõmbab sõtta ka teise

  5. Noor film oli jumekas / Jaan Ruus

    Index Scriptorium Estoniae

    Ruus, Jaan, 1938-2017

    2006-01-01

    8. Eesti filmi päevade võistluskavas osales 40 filmi. Parimaks mängufilmiks valiti "Tühirand" (režii Veiko Õunpuu). Enim vaadatud filmi auhinna sai Vladimir Karassev-Orgussaare mängufilm "Lindpriid" (1971). Huvitavad filmid on veel "Tabamata ime" (6 režissööri lühifilmid), Kullar Viimse "Sunnitud", Rein Kotovi "6 tundi", Pärtel Talli "Teatriporgand"

  6. Vanasti oli parem / Paul-Eerik Rummo

    Index Scriptorium Estoniae

    Rummo, Paul-Eerik, 1942-

    2002-01-01

    Ilmunud ka: Hiiumaa, Koit, Lääne-Harju Ekspress, Pärnu Postimees 5. apr. lk. 2;6;3;2, Hiiu Leht 5. apr. lk. 2, Põhjarannik, Severnoje Poberezhje 5. apr. lk. 2, Vooremaa 9. apr. lk. 2, Nädaline, Valgamaalane, Lääne Elu 9. apr. lk. 2;2;4, Meie Maa 10. apr. lk. 2, Sakala 18. apr. lk. 2, Järva Teataja 20. apr. lk. 2, Paremad Uudised aprill nr. 4 lk. 7. Eesti erakonnapoliitikast. Autor: Reformierakond. Parlamendisaadik

  7. Kuni 11. XII oli Tallinna Linnagaleriis...

    Index Scriptorium Estoniae

    2005-01-01

    Valie Export Society (Kadi Estland, Mari Laanemets, Killu Sukmit) väljapanek "Streik ei ole horoskoop!" - dokumentatsioon, kus üksteisele saadetud e-kirjades avatakse naiskunstnike rühmituse eesmärk ja praegune olukord, peatutakse Eesti kunstielu võimuküsimustel

  8. See oli masendav otsustamatus / Enn Tarto

    Index Scriptorium Estoniae

    Tarto, Enn, 1938-

    2001-01-01

    Hinnang kommunistlikule režiimile jäi Riigikogus andmata. Autor: Rahvaerakond Mõõdukad. Parlamendisaadik. Ilmunud ka: Tartu : Postimees, 18. juuni 2001, lk. 2; Koit, 16. juuni 2001, lk. 6; Hiiumaa, 16. juuni 2001, lk. 2; Vooremaa, 19. juuni 2001, lk. 2; Nädaline, 19. juuni 2001, lk. 5; Valgamaalane, 19. juuni 2001, lk. 2

  9. Õudusfilmifestival oli edukas / Enriika Liiv

    Index Scriptorium Estoniae

    Liiv, Enriika

    2006-01-01

    PÖFF-i abiga (sõna võttis ka Tiina Lokk) Haapsalus toimunud õudusfilmide festival, idee autoriks reklaamiagentuuri Zavood juht Marek Reinaas. Eesti Kunstiakadeemia tudengid esinesid videoinstallatsioonide ja perfomance'ite eriprojektiga "Hirmurõõm". Näidati ka kolme eesti õudusfilmi : "Hirm", "The Undertaker", "Down Below" (režii Terje Laimets)

  10. Barbarus oli ka prohvet / Arvi Leosk

    Index Scriptorium Estoniae

    Leosk, Arvi

    2000-01-01

    Seoses Enn Nõu romaaniga "Presidendi kojutulek" (1996), Toomas Kalli lavatükiga "Vares & Barbarus" (Looming 2000, nr. 8) ja Kauksi Ülle näidendiga "Ah tsusku külh, olõss õkva likõs saanu!" (esitati Kaika suveülikoolis suvel 2000)

  11. Effect of muscle and intensity of finishing diet on meat quality of foals slaughtered at 15 months.

    Science.gov (United States)

    Franco, Daniel; Lorenzo, José M

    2014-01-01

    The effect of muscle and intensity of finishing diet on meat quality of foals slaughtered at 15 months was study. For this work, a total of twenty one foals and six muscles: longissimus dorsi (LD), semimembranosus (SM), semitendinosus (ST), biceps femoris (BF), triceps brachii (TB) and Psoas major & minor (PM) from two different intensities of finishing diet (1.5 vs. 3 kg/day) were analysed. Meat quality (chemical composition, colour characteristics, and textural traits), fatty and amino acid profile and mineral composition were studied. In general the factor muscle had more effect on all traits measured in this study than finishing effect, especially in the fatty acids and mineral composition. SM muscle showed the highest percentage of protein in both finishing groups (22.34 and 21.74% for 3 and 1.5 kg of commercial feeding, respectively). The intramuscular fat content in the analysed muscles ranged between 0.15% (LD in 1.5 group) and 1.83% (PM in 3.0 group). The highest values of iron heme that were obtained in TB muscle (2.46 mg/100 g meat) are a considerable source of bioavailable iron content. The three most abundant fatty acids in both groups and for all muscles studied were oleic acid, palmitoleic acid and linoleic acid. From a healthy point of view, muscles from foals finishing with a minor amount of commercial fodder were the best. The best nutritional value was reached for PM and ST with 14.73% of total omega 3 and the highest polyunsaturated/saturated ratio (1.10), respectively. Concerning amino acid profile, values of essential/non-essential ratio were significantly higher (Pmuscles of 1.5 diet group foals (0.856) than the other group (0.833). Finally, potassium (243 mg/100 g) and phosphorous (202 mg/100 g) were the two main minerals, followed by sodium (54 mg/100 g) and magnesium (26 mg/100 g). © 2013.

  12. Effect of supplemental vitamins and trace minerals on performance and carcass quality in finishing pigs.

    Science.gov (United States)

    Edmonds, M S; Arentson, B E

    2001-01-01

    Two trials with finishing pigs (PIC line 355 x Camborough 22) were conducted to evaluate the effects of vitamin and trace mineral (VTM) supplement deletions on performance, carcass quality, and tissue nutrient levels. Trial 1, a 3 x 2 factorial arrangement of treatments involving three VTM supplement regimens and two stress regimens, was conducted for 12 wk with 252 pigs (mixed sex). Average initial weight of pigs was 54 kg. The VTM regimens consisted of control (adequate level of VTM throughout trial), VTM deleted for the final 6 wk, and VTM deleted for entire 12 wk of the trial. The stress regimens consisted of leaving half the treatments in their original location or moving the other half of the treatments to a new pen location every 3 wk. There were three replications (pens) per treatment with 14 pigs per pen (0.80 m2). Diets were medicated with bacitracin methylene disalicylate. Overall, there were no treatment differences (P > 0.05) for ADG, ADFI, gain:feed ratio, longissimus muscle area, or last-rib backfat. However, there was a greater than 75% decrease (P < 0.001) in vitamin E content of longissimus muscle from deleting VTM for 6 or 12 wk. Trial 2, a 3 x 2 factorial arrangement of treatments involving three VTM regimens and two genders, was conducted for 12 wk with 306 pigs. Average initial weight of pigs was 58 kg. The VTM regimens were identical to those used in Trial 1. Each treatment consisted of three gender replications of 17 pigs per pen (0.66 m2), and all diets were unmedicated. Overall, pigs fed diets without VTM for 12 wk had lower (P < 0.06) ADG than those fed the control diets. Vitamin E content of the ham muscle was reduced by greater than 50% (P < 0.001) when pigs were fed diets without VTM for 6 or 12 wk compared with those fed the control diet. Concentrations of copper in ham muscle were reduced (P < 0.05) in pigs fed diets without VTM. These data suggest that deleting VTM during the finishing stage markedly lowers the vitamin E content of

  13. Feeding value of supplemental curcas crude oil in finishing diets for feedlot lambs.

    Science.gov (United States)

    Félix-Bernal, J A; Estrada-Angulo, A; Angulo-Escalante, M A; Castro-Pérez, B I; Landeros-López, H; López-Soto, M A; Barreras, A; Zinn, R A; Plascencia, A

    2016-09-01

    The objective of this experiment was to determine the feeding value of a mechanically extracted nontoxic variety of oil (JCO) as source of energy for feedlot lambs. Twenty Pelibuey × Katahdin lambs were individually fed a dry-rolled-corn-based finishing diet supplemented with 0%, 2%, 4%, or 6% JCO (diet dry matter basis). Supplemental JCO replaced dry rolled corn in the basal diet. Fatty acid composition of JCO was C16:0, 14.0%; C18:0, 8.2%; C18:1, 26.0%; C18:2, 50.3%, and C18:3, 0.4%. Daily intakes of JCO averaged 24.7, 51.1, and 77.3 g/day or 0.57, 1.08, and 1.62 g/kg LW for the 2%, 4%, and 6% levels of supplementation, respectively. Supplemental JCO did not affect ( = 0.33) dry matter intake (DMI), but tended to increase (linear effect, = 0.06) average daily gain, efficiency of gain (linear effect, < 0.01), and dietary net energy (linear effect, < 0.01) and decreased (linear effect, < 0.01) the ratio of observed/expected DMI. At low levels (20 g/kg diet dry matter) of supplementation, the net energy (NE) value of JCO corresponds closely (0.99) to the NE value assigned by current standards (), and this NE value decreased linearly as the inclusion level of JCO increased. There were not treatment effects on plasma metabolites. Across treatments, the concentrations of hemoglobin (11.64 ± 1.08 g/dL), hematocrit (39.15 ± 3.67%), glucose (85.2 ± 17.64 mg/dL), creatinine (1.43 ± 0.28 mg/dL), and urea (20.70 ± 4.35 mg/dL) were within normal (9-15 g/dL, 27%-40%, 50-90 mg/dL, 1.0-1.8 mg/dL, and 15-50 mg/dL, for hemoglobin, hematocrit, glucose, creatinine, and urea, respectively) ranges for healthy lambs. Based on DMI, performance and plasma metabolites observed in this study, nontoxic JCO is a suitable source of energy in finishing diets for lambs.

  14. Co-extrusion of semi-finished aluminium-steel compounds

    Science.gov (United States)

    Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J.

    2017-10-01

    The combination of light metals and steels allows for new lightweight components with wear-resistant functional surfaces. Within the Collaborative Research Centre 1153 novel process chains are developed for the manufacture of such hybrid components. Here, the production process of a hybrid bearing bushing made of the aluminium alloy EN AW-6082 and the case-hardened steel 20MnCr5 is developed. Hybrid semi-finished products are an attractive alternative to conventional ones resulting from massive forming processes where the individual components are joined after the forming process. The actual hybrid semi-finished products were manufactured using a lateral angular co-extrusion (LACE) process. The bearing bushings are subsequently produced by die forging. In the present study, a tool concept for the LACE process is described, which renders the continuous joining of a steel rod with an aluminium tube possible. During the LACE process, the rod is fed into the extrusion die at an angle of approx. 90°. Metallographic analysis of the hybrid profile showed that the mechanical bonding between the different materials begins about 75 mm after the edge of the aluminium sheath. In order to improve the bonding strength, the steel rod is to be preheated during extrusion. Systematic investigations using a dilatometer, considering the maximum possible co-extrusion process parameters, were carried out. The variable parameters for the dilatometer experiments were determined by numerical simulation. In order to form a bond between the materials, the oxide layer needs to be disrupted during the co-extrusion process. In an attempt to better understand this effect, a modified sample geometry with chamfered steel was developed for the dilatometer experiments. The influence of the process parameters on the formation of the intermetallic phase at the interface was analysed by scanning electron microscopy and X-ray diffraction. This article, which was originally published online on 16

  15. Environmental impact of replacing soybean meal with rapeseed meal in diets of finishing pigs.

    Science.gov (United States)

    van Zanten, H H E; Bikker, P; Mollenhorst, H; Meerburg, B G; de Boer, I J M

    2015-11-01

    The major impact of the livestock sector on the environment may be reduced by feeding agricultural co-products to animals. Since the last decade, co-products from biodiesel production, such as rapeseed meal (RSM), became increasingly available in Europe. Consequently, an increase in RSM content in livestock diets was observed at the expense of soybean meal (SBM) content. Cultivation of SBM is associated with high environmental impacts, especially when emissions related to land use change (LUC) are included. This study aims to assess the environmental impact of replacing SBM with RSM in finishing pig diets. As RSM has a lower nutritional value, we assessed the environmental impact of replacing SBM with RSM using scenarios that differed in handling changes in nutritional level. Scenario 1 (S1) was the basic scenario containing SBM. In scenario 2 (S2), RSM replaced SBM based on CP content, resulting in reduced energy and amino acid content, and hence an increased feed intake to realize the same growth rate. The diet of scenario 3 (S3) was identical to S2; however, we assumed that pigs were not able to increase their feed intake, leading to reduced growth performance. In scenario 4 (S4), the energy and amino acid content were increased to the same level of S1. Pig performances were simulated using a growth model. We analyzed the environmental impact of each scenario using life-cycle assessment, including processes of feed production, manure management, piglet production, enteric fermentation and housing. Results show that, expressed as per kg of BW, replacing SBM with RSM in finishing pig diets marginally decreased global warming potential (GWP) and energy use (EU) but decreased land use (LU) up to 12%. Between scenarios, S3 had the maximum potential to reduce the environmental impact, due to a lower impact per kg of feed and an increased body protein-to-lipid ratio of the pigs, resulting in a better feed conversion ratio. Optimization of the body protein

  16. Effect of inclusion of citrus pulp in the diet of finishing swines

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Watanabe

    2010-06-01

    Full Text Available The aim of this work was to study the effect of inclusion of citrus pulp in the diet of finishing pigs. In the first trial, 16 Topigs barrows with 80.5±4.7 kg of initial BW were used to evaluate the digestibility of citrus pulp. Having 18.85% of neutral detergent fiber and 41.18% of neutral detergent soluble fiber, citrus pulp showed as a feasible alternative ingredient to be added in the diets of feed restricted finishing pigs. Second trial tested the use of 0, 10, 20, 30% of citrus pulp in the diets of 36-feed-restricted barrows with initial BW of 83.7±5.1 kg. A quadratic trend (P0.05, but a quadratic trend existed on cholesterol serological content.No primeiro ensaio foram utilizados 16 suínos machos castrados da linhagem Topigs, com peso inicial de 80,5±4,7 kg, para a avaliação biológica da polpa cítrica. Por apresentar 18,85% de fibra em detergente neutro e 41,18% de fibra solúvel em detergente neutro, a polpa cítrica mostrou-se como um ingrediente viável a ser utilizado em programas de restrição alimentar qualitativa. No segundo ensaio foram utilizados 36 suínos machos castrados, com peso inicial de 83,7±5,1 kg, recebendo rações com níveis de 0, 10, 20 e 30% de polpa cítrica. Os animais foram abatidos com peso próximo de 130 kg, sendo avaliados quanto ao desempenho e parâmetros séricos. Houve resposta quadrática (P0,05 dos níveis de polpa cítrica sobre a uréia e triacilgliceróis, porém houve resposta quadrática (P<0,05 para o colesterol em função dos níveis de polpa cítrica.

  17. Uso de imagens do LISS-3/Resourcesat-1 e do OLI/Landsat-8 no estudo espacial da queda do nível de água no lago de Furnas no ano de 2012

    Directory of Open Access Journals (Sweden)

    Gabriel Thomé Brochado

    2014-10-01

    Full Text Available O presente trabalho teve como objetivo analisar, por meio de imagens de diferentes sensores e técnicas de geoprocessamento, o efeito da queda do nível de água que ocorreu no Lago de Furnas no ano de 2012. Esta análise foi feita com base nas imagens satélites em três distintos anos: antes do evento (imagens de 2010, durante o evento (imagens de 2012 e depois do evento (imagens do ano de 2013. Para realizar o mapeamento do nível de água nos anos de 2010 e 2012 foram utilizadas imagens do LISS3/Resourcesat-1 e para o ano de 2013 imagens do OLI/Landsat-8, todas processadas e interpretadas em ambiente SIG. O produto final apresenta quatro classes: i superfície de água permanente nos três anos, ii superfície seca permanente nos três anos, iii superfícies de água recuperada e iv não recuperada até ao último ano (2013. A metodologia consistiu de cinco etapas: preparo, fatiamento, álgebra de mapas, edição matricial e cálculo de áreas. O mapa da redução do nível de água do Lago foi gerado a partir de uma operação matricial algébrica entre as máscaras de superfície de água extraídas das bandas do infravermelho próximo, cujo resultado foi editado manualmente para corrigir erros de classificação. Para validar o mapa foram usadas fotografias veiculadas pela imprensa local, durante o evento de redução de nível de água. Os resultados desta pesquisa permitiram concluir que esta metodologia é fácil de ser reproduzida e pode ser utilizada em outras regiões.

  18. History and stabilization of the Plutonium Finishing Plant (PFP) complex, Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.S., Fluor Daniel Hanford

    1997-02-18

    The 231-Z Isolation Building or Plutonium Metallurgy Building is located in the Hanford Site`s 200 West Area, approximately 300 yards north of the Plutonium Finishing Plant (PFP) (234-5 Building). When the Hanford Engineer Works (HEW) built it in 1944 to contain the final step for processing plutonium, it was called the Isolation Building. At that time, HEW used a bismuth phosphate radiochemical separations process to make `AT solution,` which was then dried and shipped to Los Alamos, New Mexico. (AT solution is a code name used during World War II for the final HEW product.) The process was carried out first in T Plant and the 224-T Bulk Reduction Building and B Plant and the 224-B Bulk Reduction Building. The 224-T and -B processes produced a concentrated plutonium nitrate stream, which then was sent in 8-gallon batches to the 231-Z Building for final purification. In the 231-Z Building, the plutonium nitrate solution underwent peroxide `strikes` (additions of hydrogen peroxide to further separate the plutonium from its carrier solutions), to form the AT solution. The AT solution was dried and shipped to the Los Alamos Site, where it was made into metallic plutonium and then into weapons hemispheres.` The 231-Z Building began `hot` operations (operations using radioactive materials) with regular runs of plutonium nitrate on January 16, 1945.

  19. Exploration Feeding and Higher Space Allocation Improve Welfare of Growing-Finishing Pigs.

    Science.gov (United States)

    Vermeer, Herman M; Dirx-Kuijken, Nienke C P M M; Bracke, Marc B M

    2017-04-29

    Lack of environmental enrichment and high stocking densities in growing-finishing pigs can lead to adverse social behaviors directed to pen mates, resulting in skin lesions, lameness, and tail biting. The objective of the study was to improve animal welfare and prevent biting behavior in an experiment with a 2 × 2 × 2 factorial design on exploration feeding, stocking density, and sex. We kept 550 pigs in 69 pens from 63 days to 171 days of life. Pigs were supplemented with or without exploration feeding, kept in groups of seven (1.0 m²/pig) or nine animals (0.8 m²/pig) and separated per sex. Exploration feeding provided small amounts of feed periodically on the solid floor. Skin lesion scores were significantly lower in pens with exploration feeding ( p = 0.028, p space allowance ( p = 0.005, p = 0.006, p exploration feeding had fewer front skin lesions than females with exploration feeding ( p = 0.022). Pigs with 1.0 m² compared to 0.8 m² per pig had a higher daily gain of 27 g per pig per day ( p = 0.04) and males compared to females had a higher daily gain of 39 g per pig per day ( p = 0.01). These results indicate that exploration feeding might contribute to the development of a more welfare-friendly pig husbandry with intact tails in the near future.

  20. Carcass characteristics and meat quality of Aberdeen Angus steers finished on different pastures

    Directory of Open Access Journals (Sweden)

    Thais Devincenzi

    2012-04-01

    Full Text Available The present study was conducted to assess carcass features, physicochemical and sensory parameters of meat from steers finished on three types of pastures: natural pasture; natural pasture improved, fertilized and oversown with winter species; and annual summer grassland. The experiment was conducted from December 14, 2009 to November 30, 2010, with treatments distributed in a completely randomized design with a different number of replicates. Animals were used as experimental units. Experimental animals were Aberdeen Angus steers with twenty months of initial age and 354±27.4 kg of live weight, on average. The highest average daily gains were obtained for the annual summer grassland. There was no effect of treatments on carcass conformation. The highest carcass yield was obtained on the improved natural pasture. Forequarter yield, side cut yield and longissimus muscle area were similar between the pastures. Moisture and total lipids were not affected by the pasture. Thawing and cooking losses were higher in improved natural pasture and lower in sorghum pasture. Regardless of the treatment, the meat had luminosity ranging from intermediate to dark, high in red, high in yellow, and considered within the normal range for beef. Meat of higher shear force was found in natural pasture, and lower shear force was observed in meat from annual summer grassland. Average live weight daily gain explained 18% of the shear force. Sensory evaluation by duo-trio test showed differences between samples from distinct pastures in flavor. All the studied systems allow for desirable characteristics in carcass and meat.

  1. Time budgets of finishing bulls housed in an uninsulated barn or at pasture

    Directory of Open Access Journals (Sweden)

    Leena Tuomisto

    2015-10-01

    Full Text Available This study aimed at comparing the behaviour of finishing bulls raised in an uninsulated barn (UB and at pasture (PAS. In experiment 1, dairy bulls were housed in an uninsulated barn (two groups of five bulls, 32 m2/pen or at pasture (groups of four and five bulls, 5000 m2/paddock. In experiment 2, Hereford bulls were housed in an uninsulated barn (three groups of four or five bulls, 32 m2/pen or at pasture (three groups of five bulls, 5000 m2/paddock. There were no differences in drinking, social licking, butting, other social behaviour, self-licking or idling between the UB and PAS bulls. The UB bulls spent more time in lying, ruminating, oral explorative and manipulative behaviour and rubbing and less time foraging and walking than the PAS bulls. The UB bulls performed more social licking and oral manipulation of objects and less mounting than the PAS bulls. These differences resulted most probably from the different feeding regimes and different space allowances.

  2. Finishing what was started: an analysis of theater research conducted from 2010 to 2012.

    Science.gov (United States)

    Dukes, Susan; Tourtillott, Brandon; Bryant, Devin; Carter, Kristina; McNair, Shanelle; Maupin, Genny; Tamminga, Cindy

    2015-03-01

    The Joint Combat Casualty Research Team (JC2RT) is part of the human research protection regulatory system implemented in 2005 to oversee the conduct of research in a deployed military combatant command. In 2010, SharePoint, a web-based tool, was established to track study documents. This study conducted by JC2RT no. 13 describes characteristics of research studies under the purview of the JC2RT from 2010 through 2012. Of the 83 research studies reviewed, 34% were completed, 32% were not completed, and 34% were still in progress. Target sample sizes ranged from 12 to 70,000, with 96% of the research studying U.S. military members. The design of 61% of the studies was prospective, 20% surveys, and 14% retrospective reviews. Approximately one-half of the studies were conducted at single sites. Eighty-four percent of the studies that finished an institutional review board (IRB) were completed, whereas a large number of studies never made it to IRB approval. Even after studies have gone through the rigorous process of scientific review and IRB approval some continue to struggle for years to be completed in the theater of operations. The JC2RT is committed to helping facilitate the ethical conduct of research during war. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

  3. Artificial evolutionary approaches to produce smoother surface in magnetic abrasive finishing of hardened AISI 52100 steel

    Energy Technology Data Exchange (ETDEWEB)

    Teimouri, Reza; Baseri, Hamid [Babol University of Technology, Babol (Iran, Islamic Republic of)

    2013-02-15

    In this work, two models of feed forward back-propagation neural network (FFBP-NN) and adaptive neuro-fuzzy inference system (ANFIS) have been developed to predict the performance of magnetic abrasive finishing process, based on experimental data of literature. Input parameters of process are electromagnet's voltage, mesh number of abrasive particles, poles rotational speed and weight percent of abrasive particles, and also the output is percentage of surface roughness variation. In order to select the best model, a comparison between developed models has been done based on their mean absolute error (MAE) and root mean square error (RMSE). Moreover, optimization methods based on simulated annealing (SA) and particle swarm optimization (PSO) algorithms were used to maximize the percent of surface roughness variation and select the optimal process parameters. Results indicated that the models based on artificial intelligence predict much more precise values with respect to predictive regression model developed in main literature. Also, the ANFIS model had a lowest value of MAE and RMSE with respect to others. So it was used as an objective function to maximize the surface roughness variation by using SA and PSO. Comparison between the obtained optimal solutions and analysis of results in main literature indicated that SA and PSO could find the optimal answers logically and precisely.

  4. Simultaneous serological evidence of Actinobacillus pleuropneumoniae, PRRS, Aujeszky's disease and influenza viruses in Spanish finishing pigs.

    Science.gov (United States)

    Gutiérrez-Martín, C B; Rodríguez-Delgado, O; Alvarez-Nistal, D; De La Puente-Redondo, V A; García-Rioja, F; Martín-Vicente, J; Rodríguez Ferri, E F

    2000-02-01

    A total of 198 pigs with tachypnoea and temperature >/= 40 degrees C were selected on a Spanish finishing unit, and their sera were examined for antibodies to Actinobacillus pleuropneumoniae (App), porcine reproductive and respiratory syndrome virus (PRRSV), Aujeszky' disease virus (ADV), and swine influenza virus (SIV). Eighty-nine point nine per cent of the pigs were seropositive to App, 88.6 per cent to PRRS, 73.0 per cent to ADV, and 30.6 per cent to SIV. Thirty-one pigs (15.6 per cent) were seropositive for App, PRRSV, ADV and SIV, and only one (0.5 per cent) was seronegative for all. Statistical association was assessed for dual infections but it was not found in any case (P > 0.05). Other parameters (dyspnoea, nasal discharge and coughing) were also recorded, and no significant associations between them and the presence of antibodies against any of the four infections was found. Copyright 2000 Harcourt Publishers LtdCopyright 2000 Harcourt Publishers Ltd.

  5. First ‘Gentner Doktor’ finishes PhD at CERN

    CERN Multimedia

    Jordan Juras

    2011-01-01

    In 2007, the CERN Doctoral Student Programme saw the addition of the Gentner Doctoral Student Programme, named in honour of the celebrated nuclear physicist, Wolfgang Gentner. Four years later, on 22 June 2011, Marcel Schuh finished his PhD with a thesis in the field of accelerator technology and became the very first ‘Gentner Doktor’.   Marcel Schuh, first 'Gentner Doktor', celebrates completing his PhD. (Photo by Carsten P. Welsch) Marcel Schuh became a Gentner student in April 2008, after completing a physics degree in 2007 at the University of Heidelberg. His thesis allowed him to gain exposure to CERN and the LHC, as he worked on monitoring and control systems for trigger and readout electronics on the ALICE detector at the LHC. With the support of university supervisor, Carsten P. Welsch, Schuh applied for a Gentner Doctoral Studentship on the Superconducting Proton Linac (SPL) project. “My task was to evaluate whether dedicated higher order mode (HOM) coupler...

  6. Influence of Textile Structure and Silica Based Finishing on Thermal Insulation Properties of Cotton Fabrics

    Directory of Open Access Journals (Sweden)

    G. Rosace

    2016-01-01

    Full Text Available The aim of this work is to investigate the influence of weave structures and silica coatings obtained via sol-gel process on the thermal insulation properties of cotton samples. For this reason three main weave structures (plain, satin, and piqué of cotton fabric were selected with different yarn count, threads per cm, and mass per square meter values. Thereafter, only for the plain weave, the samples were padded using silica sol formed by hydrolysis and subsequent condensation of 3-glycidoxypropyltrimethoxysilane under acidic conditions. The silanized plain weave samples were characterized by TGA and FT-IR techniques. The thermal properties were measured with a home-made apparatus in order to calculate thermal conductivity, resistance, and absorption of all the treated fabric samples. The relationship between the thermal insulation properties of the plain weave fabrics and the concentration of sol solutions has been investigated. Fabrics weave and density were found to strongly influence the thermal properties: piqué always shows the lowest values and satin shows the highest values while plain weave lies in between. The thermal properties of treated high-density cotton plain weave fabric were proved to be strongly influenced by finishing agent concentration.

  7. Antimicrobial use in Swedish farrow-to-finish pig herds is related to farmer characteristics.

    Science.gov (United States)

    Backhans, Annette; Sjölund, Marie; Lindberg, Ann; Emanuelson, Ulf

    2016-01-01

    Antimicrobial resistance is an increasing problem and reducing AM use is critical in limiting its severity. The underlying causes of antimicrobial use at pig farm level must be understood to select effective reduction measures. We previously showed that antimicrobial use on Swedish pig farms is comparatively low but varies between farms, although few farms are high users. In the present survey of a convenience sample of 60 farrow-to-finish herds in Sweden, we investigated farmers' attitudes to antimicrobials and the influence of information provided by veterinarians about antimicrobial resistance. Farm characteristics were also recorded. We had previously quantified antimicrobial use for different age categories of pigs during one year, as well as external and internal biosecurity. Risk factors based on hypothetical causal associations between these and calculated treatment incidence (TI) for the different age categories were assessed here in a linear regression model. There were no significant associations between biosecurity and TI for any pig age category. Increasing farmer age was associated with higher TI for suckling piglets and fatteners. For suckling piglets, the age group with the highest frequency of treatment, TI was also significantly associated with farmer and education of the staff, where female farmers, and university educated staff was associated with a higher TI. Larger farms were associated with a higher TI in fatteners. In the investigated Swedish pig farms, factors that influenced antimicrobial usage were more related to characteristics of the individual farmer and his/her staff than to biosecurity level, other management factors or farmers' attitudes to antimicrobials.

  8. 3D printed glass: surface finish and bulk properties as a function of the printing process

    Science.gov (United States)

    Klein, Susanne; Avery, Michael P.; Richardson, Robert; Bartlett, Paul; Frei, Regina; Simske, Steven

    2015-03-01

    It is impossible to print glass directly from a melt, layer by layer. Glass is not only very sensitive to temperature gradients between different layers but also to the cooling process. To achieve a glass state the melt, has to be cooled rapidly to avoid crystallization of the material and then annealed to remove cooling induced stress. In 3D-printing of glass the objects are shaped at room temperature and then fired. The material properties of the final objects are crucially dependent on the frit size of the glass powder used during shaping, the chemical formula of the binder and the firing procedure. For frit sizes below 250 μm, we seem to find a constant volume of pores of less than 5%. Decreasing frit size leads to an increase in the number of pores which then leads to an increase of opacity. The two different binders, 2- hydroxyethyl cellulose and carboxymethylcellulose sodium salt, generate very different porosities. The porosity of samples with 2-hydroxyethyl cellulose is similar to frit-only samples, whereas carboxymethylcellulose sodium salt creates a glass foam. The surface finish is determined by the material the glass comes into contact with during firing.

  9. SUPPLEMENTATION WITH PROTEIN SOURCES IN THE FINISHING STAGE OF BEEF HEIFERS: A BIOECONOMICAL STUDY

    Directory of Open Access Journals (Sweden)

    Rondineli Pavezzi Barbero

    2016-01-01

    Full Text Available The purpose of this study was to evaluate biological and economically the use of three protein sources (soybean meal (SM, cottonseed (CS or turnip cake (TC, in the supplement formulation (1.0 % of body weight (BW in the finishing stage of heifers grazing Marandu grass pastures during the dry season. This experiment was conducted in the city of Potirendaba, São Paulo State, and the chemical analyses were performed at the Londrina State University, Paraná State. The experimental area had six hectares, divided into three paddocks, each one with six crossbred heifers (Simmental × Nellore, initial BW of 210 ± 8.34 kg, and age of 15 ± 3 months. Economic analysis was performed using the method of partial budgeting. The experimental design was completely randomized, with six replicates per treatment (n = 18. Analysis of variance was conducted, and means were compared by Tukey test (P <0.05. Animals supplemented with TC exhibited lower weight gain (SM = 0.81, CS = 0.76 and TC = 0.40 kg / animal / day; P <0.05. Negative changes were observed in net income for the CS supplements (US $ -22.15 / animal and TC (US $ -1.96 / animal relative to the SM supplement, which showed better biologic and economic results. Keywords: beef cattle; partial budgets; supplementation.

  10. Growth performance, carcass characteristics and meat quality of finishing bulls fed crude glycerin-supplemented diets

    Directory of Open Access Journals (Sweden)

    Mônica Chaves Françozo

    2013-04-01

    Full Text Available This study was conducted to evaluate the performance, carcass characteristics and chemical composition of Longissimusmuscle (LM of the bulls. Twenty-four Nellore bulls were used in a complete randomised design. The bulls were randomly assigned to one of the three diets containing 0, 5 or 12% glycerin. Final BW and ADG were similar (P>0.05 between the bulls fed with 5 or 12% of glycerin but were higher (P0.05 by glycerin level. Hot carcass weight increased (P0.05 the conformation, colour, texture, marbling and pH. There was difference (P>0.05 for moisture, ashes and crude protein among glycerin levels. Bulls fed 12% glycerin present the highest (P<0.03 total lipids on LM. The percentage of saturated fatty acids (SFA, monounsaturated acids (MUFA, polyunsaturated acids (PUFA, n-6 and n-3 fatty acids and PUFA/SFA and n-6:n-3 ratios of the LM were similar among the diets. In conclusion, glycerin level did not affect the animal performance and carcass characteristics of Nellore bulls finished in feedlot.

  11. Identification of the finishing technique of an early eighteenth century musical instrument using FTIR spectromicroscopy.

    Science.gov (United States)

    Bertrand, Loïc; Robinet, Laurianne; Cohen, Serge X; Sandt, Christophe; Le Hô, Anne-Solenn; Soulier, Balthazar; Lattuati-Derieux, Agnès; Echard, Jean-Philippe

    2011-03-01

    The study of varnishes from musical instruments presents the difficulty of analysing very thin layers of heterogeneous materials on samples most of which are generally brittle and difficult to prepare. Such study is crucial to the understanding of historical musical instrument varnishing practices since written sources before 1800 are very rare and not precise. Fourier-transform infrared (FTIR) spectroscopy and imaging methods were applied to identify the major chemical components within the build-up of the varnish layers on a cello made by one of the most prominent French violin-makers of the eighteenth century (Jacques Boquay, ca. 1680-1730). Two types of FTIR imaging methods were used: scanning with a synchrotron-based microscope and full-field imaging using a 2D imager with a conventional source. An interpretation of the results obtained from these studies on the Boquay cello is that the maker first applied a proteinaceous layer, probably gelatine-based animal glue. He later applied a second layer based on a mixture of a drying oil and diterpenic resin from Pinaceae sp. From an historical perspective, the results complement previous studies by describing a second technique used for musical instrument finishes at the beginning of the eighteenth century in Europe.

  12. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites.

    Science.gov (United States)

    Gönülol, Nihan; Yilmaz, Fikret

    2012-12-01

    The aim of this in vitro study was to evaluate the effects of different finishing and polishing techniques on the surface roughness and color stability of nanocomposites. Two nanohybrid (Grandio, Aelite Aesthetic Enamel), two nanofill (Filtek Supreme XT Dentin and Translucent), and a microhybrid (Filtek Z250) composites were used. Two hundred and eighty disc-shaped specimens were cured under a mylar strip. Seven specimens of each resin composite were randomly assigned to one of the seven polishing systems. A profilometer was used for assessing surface roughness. ΔE was calculated with a colorimeter at baseline and 48 h after storage in a coffee solution. The results were analysed by two-way ANOVA and Tukey's HSD test (α=0.05). Regression analysis was used to examine the correlation between surface roughness and color stability (α=0.01). There was no significant difference in R(a) values between mylar strips and Sof-Lex polishing discs (p>0.05). The highest ΔE and R(a) values were obtained from Grandio (pGrandio presented the highest surface roughness and staining susceptibility after storage in coffee solution. Aelite Aesthetic Enamel, which did not include TEGDMA in its composition, showed the least discoloration. The composites with smaller filler size did not necessarily show low surface roughness and discoloration. Staining of composite resins was dependent on monomer structure, as well as surface irregularities. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Artificial evolutionary approaches to produce smoother surface in magnetic abrasive finishing of hardened AISI 52100 steel

    International Nuclear Information System (INIS)

    Teimouri, Reza; Baseri, Hamid

    2013-01-01

    In this work, two models of feed forward back-propagation neural network (FFBP-NN) and adaptive neuro-fuzzy inference system (ANFIS) have been developed to predict the performance of magnetic abrasive finishing process, based on experimental data of literature. Input parameters of process are electromagnet's voltage, mesh number of abrasive particles, poles rotational speed and weight percent of abrasive particles, and also the output is percentage of surface roughness variation. In order to select the best model, a comparison between developed models has been done based on their mean absolute error (MAE) and root mean square error (RMSE). Moreover, optimization methods based on simulated annealing (SA) and particle swarm optimization (PSO) algorithms were used to maximize the percent of surface roughness variation and select the optimal process parameters. Results indicated that the models based on artificial intelligence predict much more precise values with respect to predictive regression model developed in main literature. Also, the ANFIS model had a lowest value of MAE and RMSE with respect to others. So it was used as an objective function to maximize the surface roughness variation by using SA and PSO. Comparison between the obtained optimal solutions and analysis of results in main literature indicated that SA and PSO could find the optimal answers logically and precisely.

  14. Interferometric And Microscopic Measurements Of Surface Finish Appearance Evaluations Of Ophthalmic Lens Edges

    Science.gov (United States)

    Gamble, M.; Mezghani, S.; El Mansori, M.; Divo, F.

    2011-01-01

    Surface appearance and product material integrity are important features that will affect product functionality, reliability and customer confidence. Yet despite this, and perhaps surprisingly, lens surface inspection is still undertaken visually with undefined criteria, varying levels of quality expertise, and differing moods of inspectors. In this paper, an objective quality inspection method for the polished edge of ophthalmic lenses is developed. Four defect categorizes have been indentified on the machined edge of non-acceptable lenses: chatter marks, linear, creep and cracks. Chatter matters have an irregular surface with waviness. The linear defect has a linear defect along the lens' edge surface. Creep has deformation of the surface due to the material removal process. Cracks have cracks along the surface of the lens. The developed technique was applied to several ophthalmic lens materials (Polycarbonate, CR39, high index materials) that contain defects of diverse shapes and sizes in different locations. Results show the effectiveness of the developed inspection technique for ophthalmic lens quality assurance and defect identification. It was also found that there is a correlation between the scale-sensitive fractal dimension parameter and surface finish appearance.

  15. Development of a nested-PCR assay for the detection of Cryptosporidium parvum in finished water.

    Science.gov (United States)

    Monis, P T; Saint, C P

    2001-05-01

    A nested-PCR assay, incorporating an internal positive control, was developed for Cryptosporidium monitoring in finished water. This assay was capable of reproducibly detecting 8 oocysts in spiked-filtered water samples collected from 5 South Australian water treatment plants. The RT-PCR assay of Kaucner and Stinear (Appl. Environ. Microbiol. 64(5) (1998) 1743) was also evaluated for the detection of Cryptosporidium parvum. Initially, under our experimental conditions, a detection level of 27 oocysts was achieved for spiked reagent water samples. This level was improved to 5 oocysts by modification of the method. Untreated South Australian source waters concentrated by calcium carbonate flocculation were found to be highly inhibitory to the RT-PCR assay. Concentration of similar samples using Envirochek filters appeared to eliminate PCR inhibition. While both methods possessed similar sensitivities the nested-PCR assay was more reproducible, more cost effective, simpler to perform and could detect both viable and non-viable intact Cryptosporidium parvum oocysts, which is an important consideration for plant operators. These factors make the nested-PCR assay the method of choice for screening large numbers of potable water samples, where a reliable low level of detection is essential.

  16. Environment, facilities, and management of hospital pens in growing and finishing pig farms: a descriptive study

    Directory of Open Access Journals (Sweden)

    Carlos Rodolfo Pierozan

    Full Text Available ABSTRACT The objective of this study was to describe the housing system in the hospital pens on growing and finishing (GF pig farms. This work was developed by using a questionnaire and was conducted between January and April, 2016. Forty-four GF commercial farms (a total of 41,111 animals were involved, seeking to raise issues concerning the facilities of the hospital pens, environment, management, feeding and the reasons for transferring the animals to these accommodations. About 98% of the evaluated farms had, at least, one hospital pen. Most of these farms presented a percentage of animals evaluated (PAE in the infirmary, of less than 1.5% of the total capacity of the animal housing on the farm. In 93.48% of the farms, the criterion used to transfer the animals to the infirmaries was when they were identified as “impaired, hurt, suffering”. In 47.83% of the cases, there were no differences between the hospital and common pens regarding the general management of the animals. The facilities and environment characteristics were similar in almost all hospital pens. Respiratory problems were the main reason for transferring pigs from the common to hospital pens. Under the conditions of this study, sufficient hospital pens exist on farms and overcrowding or competition for resources among pigs are avoided. However, there is no established standard among respondents about where to place the recovered animals.

  17. Chitosan finishing nonwoven textiles loaded with silver and iodide for antibacterial wound dressing applications.

    Science.gov (United States)

    Aubert-Viard, François; Martin, Adeline; Chai, Feng; Neut, Christel; Tabary, Nicolas; Martel, Bernard; Blanchemain, Nicolas

    2015-03-02

    Polyethylene terephtalate (PET) and Polypropylene (PP) textiles are widely used in biomedical application such as wound dressings and implants. The aim of this work was to develop an antibacterial chitosan (CHT) coating activated by silver or by iodine. Chitosan was immobilized onto PET and PP supports using citric acid (CTR) as a crosslinking agent through a pad-dry-cure textile finishing process. Interestingly, depending on the CHT/CTR molar ratio, two different systems were obtained: rich in cationic ammonium groups when the CTR concentration was 1%w/v, and rich in anionic carboxylate groups when the CTR concentration was 10%w/v. As a consequence, such samples could be selectively loaded with iodine and silver nitrate, respectively.Both types of coatings were analyzed using SEM and FTIR, their sorption capacities were evaluated toward iodide/iodate anions (I(-)/IO3(-)) and the silver cations (Ag(+)) were evaluated using elemental analysis. Finally, in vitro evaluations were carried out to evaluate the cytocompatibility on the epithelial cell line. The silver loaded textile reported a stronger antibacterial effect against E.coli (5 log10 reduction) than toward S. aureus (3 log10) while the antibacterial effect of the iodide loaded textiles was limited to 1 log10 to 2 log10 on both strains.

  18. Evaluation of the susceptibility to corrosion by pites of supermartensitic stainless steel with different superficial finishing

    International Nuclear Information System (INIS)

    Freitas, Mario Jose Bueno de Souza

    2015-01-01

    The objective of this study is to evaluate the susceptibility by pitting corrosion in a supermartensitic stainless steel (13%Cr) with different surface finishes, in an environment that simulates the conditions found in the range of the Brazilian marine subsoil before the dense layer of salt - the so-called pre-salt. In this study were conducted electrochemical tests of potentiodynamic anodic polarization and electrochemical impedance spectroscopy (EIS) in environment containing 35, 50 and 190 g/L of NaCl and dissolved oxygen concentrations <10, 100 and 500ppb. Were also used the techniques of Moessbauer spectroscopy and EDS (Energy Dispersive Spectrometry) coupled to a scanning electron microscope (SEM) for microstructural characterization of 13%Cr steel. It was observed by the electrochemical tests, the increase in the concentration of chloride ions in solution makes the studied steel more susceptible to localized corrosion. It was also observed that the material showed less susceptibility to pitting corrosion when its surface was less rough. (author)

  19. Plasma-enhanced regenerable 5,5-dimethylhydantoin (DMH) antibacterial finishing for cotton fabric

    Science.gov (United States)

    Zhou, Chang-E.; Kan, Chi-Wai

    2015-02-01

    In this study, atmospheric pressure nitrogen plasma treatment was applied to cotton fabrics in the coating process of cotton fabric coated with 5,5-dimethylhydantoin (DMH) with the aim to enhance the adhesion of DMH and antibacterial property. Then chlorine was introduced into nitrogen-containing groups on the coated cotton fabrics in order to make it antibacterial by chlorination with sodium hypochlorite. The antibacterial property, rechargeability and stability of the coated cotton fabrics were investigated. FTIR, UV and SEM were used to evaluate the surface properties, including the existence of DMH on cotton fabrics, the content of DMH on cotton fabrics and the surface topography of cotton fabrics after modification. The results showed that nitrogen plasma treatment introduces nitrogen-containing groups into cotton fabrics and enhances the adhesion of DMH on the fabrics, and introduction of chlorine on the coated fabrics inhibits bacteria, Staphylococcus aureus (S. aureus), effectively and the antibacterial property is regenerable. Therefore, the antibacterial finishing of cotton fabrics coated with DMH with the aid of nitrogen plasma treatment achieves good effect.

  20. Simultaneous dyeing and antibacterial finishing for cotton cellulose using a new reactive dye.

    Science.gov (United States)

    Farouk, R; Gaffer, H E

    2013-08-14

    Simultaneous dyeing and antibacterial finishing for cotton fabric using a new antibacterial reactive dye having a modified chemical structure to the commercial reactive dye CI Reactive Red 198 were studied. This modification was carried out by replacing metanilic acid in the commercial dye with 4-amino-N-(4,6-dimethylpyrimidin-2-yl)benzenesulfonamide (sulfadimidine). Optimum exhaustion and fixation values were achieved at 60 g/l sodium sulphate and 20 g/l sodium carbonate for both dyes. The modified dye exhibited higher substantivity, exhaustion and fixation efficiency compared to the commercial dye. Antibacterial activities of the dyed samples at different concentrations of both dyes were studied against gram positive (Staphylococcus aureus) and gram negative (Escherichia coli) bacteria. The cotton dyed with the modified dye shows higher antibacterial efficacy compared to the dyed cotton fabric using the commercial dye, especially on gram negative (E. coli) bacteria. All the reactive dyeings also exhibited high fastness properties. Copyright © 2013 Elsevier Ltd. All rights reserved.