WorldWideScience

Sample records for fingerprinting techniques rio

  1. Evaluation of particle dispersal from mining and milling operations using lead isotopic fingerprinting techniques, Rio Pilcomayo Basin, Bolivia

    Miller, Jerry R.; Lechler, Paul J.; Mackin, Gail; Germanoski, Dru; Villarroel, Lionel F.

    2007-01-01

    Mining and milling of ores from the Cerro Rico de Potosi precious metal-polymetallic tin deposits of Bolivia have led to severe contamination of water and sediments of the Rio Pilcomayo drainage system. Lead (Pb) isotopic data were used in this study to first document downstream dispersal patterns of Pb contaminated sediment within the channel of the Rio Pilcomayo, and then to determine the relative contribution of Pb from Cerro Rico within alluvial terrace soils that are used for agriculture. The concentration and isotopic composition of Pb within channel bed sediments differed significantly between 2000, 2002, and 2004. These differences presumably reflect changes in the type of ore mined and milled at Cerro Rico, and alterations in dispersal and grain-size dilution mechanisms associated with interannual variations in rainfall and runoff. Within agricultural terrace soils, both Pb concentrations and the percentage of Pb from Cerro Rico: (1) semi-systematically decrease downstream, (2) were found to decrease with terrace height above the channel, and (3) reflect the use of contaminated irrigation water. In upstream reaches (within 30 km of the mills), Pb from mining represents the most significant Pb source, accounting for more than 80% of Pb in the examined agricultural fields. At Sotomayor, located approximately 170 km from the mills, the relative contribution of Pb from Cerro Rico is highly variable between fields, but can be significant, ranging from approximately 15% to 35%. The analysis demonstrates that Pb isotopic ratios can be used to effectively trace contaminated particles through river systems and into adjacent alluvial soils, even where multiple Pb sources exist and Pb concentrations are similar to background values

  2. Array-based techniques for fingerprinting medicinal herbs

    Xue Charlie

    2011-05-01

    Full Text Available Abstract Poor quality control of medicinal herbs has led to instances of toxicity, poisoning and even deaths. The fundamental step in quality control of herbal medicine is accurate identification of herbs. Array-based techniques have recently been adapted to authenticate or identify herbal plants. This article reviews the current array-based techniques, eg oligonucleotides microarrays, gene-based probe microarrays, Suppression Subtractive Hybridization (SSH-based arrays, Diversity Array Technology (DArT and Subtracted Diversity Array (SDA. We further compare these techniques according to important parameters such as markers, polymorphism rates, restriction enzymes and sample type. The applicability of the array-based methods for fingerprinting depends on the availability of genomics and genetics of the species to be fingerprinted. For the species with few genome sequence information but high polymorphism rates, SDA techniques are particularly recommended because they require less labour and lower material cost.

  3. Identification of Tilletia species using rep-PCR fingerprinting technique

    Župunski Vesna

    2011-01-01

    Full Text Available Analyzing 167 non-processed seed samples of wheat, it was found that 145 samples (86.8 % were contaminated with Tilletia species, while 22 (13.2 % samples were not contaminated. By using rep-PCR fingerprinting technique, it was found that DNA isolates of T. tritici originated from Serbian wheat samples had 80 % similarity with positive control for T. tritici. One isolate shared similarity of 60% with T. tritici, T. controversa and T. laevis. It was supposed that this isolate belongs to T. bromi. Isolate of T. laevis shared a similarity of 70 % with isolates of T. tritici and T. controversa, while T. walkeri was more than 10 % similar with T. tritici, T. controversa and T. laevis. Although T. controversa and T. tritici had high percent of genetic similarity, they were clustered separately. Our results suggest that rep-PCR fingerprinting could be a useful tool for monitoring presence of morphologically similar Tilletia species in wheat production areas.

  4. Comparison of Powder Dusting and Cyanoacrylate Fuming Techniques in Retrieving Latent Fingerprint Exposed to Environment Conditions

    Mayalvanan, Y.; Sri Pawita Albakri Amir Hamzah; Chuan, L.L.; Muhamad Hilmi Baba; Amidon Anan

    2014-01-01

    Latent fingerprints are one of the best evidence to prove the presence of an individuals presence at the crime scene. There are many techniques available for a successful fingerprint lifting. Two of the most common ones are fingerprint powder dusting and cyanoacrylate fuming. This research aims to compare both techniques and determine which has a higher success rate in retrieving fingerprints exposed to local environmental conditions for three days. Fingerprint samples were collected from 18 subjects on glass, perspex and aluminium slides. These samples were then exposed to local environmental conditions for three days. The fingerprints were then developed using the aforementioned techniques. Based on the results, it can be safely said that, fuming results in clearer fingerprints and more minutiae can be found from the retrieved fingerprints even with exposure to less than optimum local conditions. This proves that fuming is a better fingerprint lifting method to resolve latent fingerprint compared to powder dusting. Surface on which the fingerprint is retrieved from influences the quality of clarity of a latent fingerprint. (author)

  5. Development of oil hydrocarbon fingerprinting and identification techniques

    Wang Zhendi; Fingas, Merv F.

    2003-01-01

    Oil, refined product, and pyrogenic hydrocarbons are the most frequently discovered contaminants in the environment. To effectively determine the fate of spilled oil in the environment and to successfully identify source(s) of spilled oil and petroleum products is, therefore, extremely important in many oil-related environmental studies and liability cases. This article briefly reviews the recent development of chemical analysis methodologies which are most frequently used in oil spill characterization and identification studies and environmental forensic investigations. The fingerprinting and data interpretation techniques discussed include oil spill identification protocol, tiered analytical approach, generic features and chemical composition of oils, effects of weathering on hydrocarbon fingerprinting, recognition of distribution patterns of petroleum hydrocarbons, oil type screening and differentiation, analysis of 'source-specific marker' compounds, determination of diagnostic ratios of specific oil constituents, stable isotopic analysis, application of various statistical and numerical analysis tools, and application of other analytical techniques. The issue of how biogenic and pyrogenic hydrocarbons are distinguished from petrogenic hydrocarbons is also addressed

  6. Chemometric techniques in oil classification from oil spill fingerprinting.

    Ismail, Azimah; Toriman, Mohd Ekhwan; Juahir, Hafizan; Kassim, Azlina Md; Zain, Sharifuddin Md; Ahmad, Wan Kamaruzaman Wan; Wong, Kok Fah; Retnam, Ananthy; Zali, Munirah Abdul; Mokhtar, Mazlin; Yusri, Mohd Ayub

    2016-10-15

    Extended use of GC-FID and GC-MS in oil spill fingerprinting and matching is significantly important for oil classification from the oil spill sources collected from various areas of Peninsular Malaysia and Sabah (East Malaysia). Oil spill fingerprinting from GC-FID and GC-MS coupled with chemometric techniques (discriminant analysis and principal component analysis) is used as a diagnostic tool to classify the types of oil polluting the water. Clustering and discrimination of oil spill compounds in the water from the actual site of oil spill events are divided into four groups viz. diesel, Heavy Fuel Oil (HFO), Mixture Oil containing Light Fuel Oil (MOLFO) and Waste Oil (WO) according to the similarity of their intrinsic chemical properties. Principal component analysis (PCA) demonstrates that diesel, HFO, MOLFO and WO are types of oil or oil products from complex oil mixtures with a total variance of 85.34% and are identified with various anthropogenic activities related to either intentional releasing of oil or accidental discharge of oil into the environment. Our results show that the use of chemometric techniques is significant in providing independent validation for classifying the types of spilled oil in the investigation of oil spill pollution in Malaysia. This, in consequence would result in cost and time saving in identification of the oil spill sources. Copyright © 2016. Published by Elsevier Ltd.

  7. FINGERPRINT DETECTION AND RECOGNIZATION TECHNIQUES USING GABOR FILTER

    Yogita Verma*, Prof. Bhagwati Charan Patel

    2017-01-01

    Fingerprints are most extensively and effectively appropriate for the proof of identity in present days. Mostly because of their uniqueness among the people, public acceptance, originality, stability through life, and their least risk of invasion. Fingerprint technology, which is basically a biometric system, is utilized to identify an individual based on their physical qualities. Fingerprint matching is the trendiest biometric method appropriate to provide authentication. Fingerprint verific...

  8. Generation of DNA profiles from fingerprints developed with columnar thin film technique.

    Plazibat, Stephanie L; Roy, Reena; Swiontek, Stephen E; Lakhtakia, Akhlesh

    2015-12-01

    Partial-bloody fingerprints and partial fingerprints with saliva are often encountered at crime scenes, potentially enabling the combination of fingerprint and DNA analyses for absolute identification, provided that the development technique for fingerprint analysis does not inhibit DNA analysis. 36 partial-bloody fingerprints and 30 fingerprints wetted with saliva, all deposited on brass, were first developed using the columnar-thin-film (CTF) technique and then subjected to short tandem repeat (STR) DNA analysis. Equal numbers of samples were subjected to the same DNA analysis without development. Tris (8-hydroxyquinolinato) aluminum, or Alq3, was evaporated to deposit CTFs for development of the prints. DNA was extracted from all 132 samples, quantified, and amplified with AmpFlSTR(®) Identifiler Plus Amplification Kit. Additionally, DNA analyses were conducted on four blood smears on un-fingerprinted brass that had been subjected to CTF deposition and four blood smears on un-fingerprinted brass that had not been subjected to CTF deposition. Complete and concordant autosomal STR profiles of the same quality were obtained from both undeveloped and CTF-developed fingerprints, indicating that CTF development of fingerprints preserves DNA and does not inhibit subsequent DNA analysis. Even when there were no fingerprints, CTF deposition did not lead to inhibition of DNA analysis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  9. An Efficient Automatic Attendance System Using Fingerprint Reconstruction Technique

    Ramakrishnan, Josphineleela; Ramakrishnan, M.

    2012-01-01

    Biometric time and attendance system is one of the most successful applications of biometric technology. One of the main advantage of a biometric time and attendance system is it avoids "buddy-punching". Buddy punching was a major loophole which will be exploiting in the traditional time attendance systems. Fingerprint recognition is an established field today, but still identifying individual from a set of enrolled fingerprints is a time taking process. Most fingerprint-based biometric syste...

  10. MR fingerprinting using the quick echo splitting NMR imaging technique.

    Jiang, Yun; Ma, Dan; Jerecic, Renate; Duerk, Jeffrey; Seiberlich, Nicole; Gulani, Vikas; Griswold, Mark A

    2017-03-01

    The purpose of the study is to develop a quantitative method for the relaxation properties with a reduced radio frequency (RF) power deposition by combining magnetic resonance fingerprinting (MRF) technique with quick echo splitting NMR imaging technique (QUEST). A QUEST-based MRF sequence was implemented to acquire high-order echoes by increasing the gaps between RF pulses. Bloch simulations were used to calculate a dictionary containing the range of physically plausible signal evolutions using a range of T 1 and T 2 values based on the pulse sequence. MRF-QUEST was evaluated by comparing to the results of spin-echo methods. The specific absorption rate (SAR) of MRF-QUEST was compared with the clinically available methods. MRF-QUEST quantifies the relaxation properties with good accuracy at the estimated head SAR of 0.03 W/kg. T 1 and T 2 values estimated by MRF-QUEST are in good agreement with the traditional methods. The combination of the MRF and the QUEST provides an accurate quantification of T 1 and T 2 simultaneously with reduced RF power deposition. The resulting lower SAR may provide a new acquisition strategy for MRF when RF energy deposition is problematic. Magn Reson Med 77:979-988, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

  11. A novel hand-type detection technique with fingerprint sensor

    Abe, Narishige; Shinzaki, Takashi

    2013-05-01

    In large-scale biometric authentication systems such as the US-Visit (USA), a 10-fingerprints scanner which simultaneously captures four fingerprints is used. In traditional systems, specific hand-types (left or right) are indicated, but it is difficult to detect hand-type due to the hand rotation and the opening and closing of fingers. In this paper, we evaluated features that were extracted from hand images (which were captured by a general optical scanner) that are considered to be effective for detecting hand-type. Furthermore, we extended the knowledge to real fingerprint images, and evaluated the accuracy with which it detects hand-type. We obtained an accuracy of about 80% with only three fingers (index, middle, ring finger).

  12. Beware of the possibility of fingerprinting techniques transferring DNA.

    van Oorschot, Roland A H; Treadwell, Sally; Beaurepaire, James; Holding, Nicole L; Mitchell, Robert J

    2005-11-01

    Fingerprinting brushes have the potential to collect and transfer DNA during powdering. Squirrel-hair fingerprint brushes exposed to specific sets of saliva stains and brushes used in routine casework were tested for their ability to collect and transfer DNA containing material using standard DNA extraction procedures and AmpFlSTR Profiler Plus amplification and typing procedures. The tests found that the risk of transferring DNA during powdering and having a detrimental impact on the analysis increases if the examiner powders over either biological stains (such as blood or saliva) or very fresh prints and uses more sensitive PCR amplification and typing procedures. We advocate caution when powdering prints from which DNA may also be collected and provide options for consideration to limit the risk of transferred DNA contamination while fingerprinting.

  13. Chemical fingerprint technique and its application in the ...

    The Gastrodia tuber and its active component, gastrodin, have many pharmacological effects. In this study, optimized high performance liquid chromatography (HPLC) parameters were employed to determine the chemical fingerprints and gastrodin content of nine Gastrodia tuber populations. Based on the degree of ...

  14. The development of latent fingerprints by zinc oxide and tin oxide nanoparticles prepared by precipitation technique

    Luthra, Deepali; Kumar, Sacheen

    2018-05-01

    Fingerprints are the very important evidence at the crime scene which must be developed clearly with shortest duration of time to solve the case. Metal oxide nanoparticles could be the mean to develop the latent fingerprints. Zinc oxide and Tin Oxide Nanoparticles were prepared by using chemical precipitation technique which were dried and characterized by X-ray diffraction, UV-Visible spectroscopy and FTIR. The size of zinc oxide crystallite was found to be 14.75 nm with minimum reflectance at 360 nm whereas tin oxide have the size of 90 nm and reflectance at minimum level 321 nm. By using these powdered samples on glass, plastic and glossy cardboard, latent fingerprints were developed. Zinc oxide was found to be better candidate than tin oxide for the fingerprint development on all the three types of substrates.

  15. Partial Fingerprint Image Enhancement using Region Division Technique and Morphological Transform

    Ahmad, A.; Arshad, I.; Raja, G.

    2015-01-01

    Fingerprints are the most renowned biometric trait for identification and verification. The quality of fingerprint image plays a vital role in feature extraction and matching. Existing algorithms work well for good quality fingerprint images and fail for partial fingerprint images as they are obtained from excessively dry fingers or affected by disease resulting in broken ridges. We propose an algorithm to enhance partial fingerprint images using morphological operatins with region division technique. The proposed method divides low quality image into six regions from top to bottom. Morphological operations choose an appropriate Structuring Element (SE) that joins broken ridges and thus enhance the image for further processing. The proposed method uses SE line with suitable angle theta and radius r in each region based on the orientation of the ridges. The algorithm is applied to 14 low quality fingerprint images from FVC-2002 database. Experimental results show that percentage accuracy has been improved using the proposed algorithm. The manual markup has been reduced and accuracy of 76.16% with Equal Error Rate (EER) of 3.16% is achieved. (author)

  16. On some surprising statistical properties of a DNA fingerprinting technique called AFLP

    Gort, G.

    2010-01-01

    AFLP is a widely used DNA fingerprinting technique, resulting in band absence - presence profiles, like a bar code. Bands represent DNA fragments, sampled from the genome of an individual plant or other organism. The DNA fragments travel through a lane of an electrophoretic gel or microcapillary

  17. The application of IBA techniques to air pollution source fingerprinting and source apportionment

    Cohen, D.D., E-mail: dcz@ansto.gov.au; Stelcer, E.; Atanacio, A.; Crawford, J.

    2014-01-01

    IBA techniques have been used to measure elemental concentrations of more than 20 different elements found in fine particle (PM2.5) air pollution. These data together with their errors and minimum detectable limits were used in Positive Matrix Factorisation (PMF) analyses to quantitatively determine source fingerprints and their contributions to the total measured fine mass. Wind speed and direction back trajectory data from the global HYSPLIT codes were then linked to these PMF fingerprints to quantitatively identify the location of the sources.

  18. DNA fingerprinting on trial: the dramatic early history of a new forensic technique.

    Aronson, Jay D

    2005-09-01

    The early history of "DNA fingerprinting" in the UK might have been different were it not for the accounts of two dramatic courtroom trials, made by the participants and the media, in the mid-1980s. But these reports, which misrepresented the importance DNA evidence had in the trials, left a strong impression on the British public and on judges on both sides of the Atlantic. These trials, widely considered to be the first "victories" for DNA fingerprinting, have been frequently cited as proof of the utility and reliability of the technique, in both the UK and beyond. But in reality, it was the threat of DNA evidence being used rather than the integrity or validity of it that resolved these cases. At that time, DNA fingerprinting was still in its infancy, an untried and untested technology.

  19. Evaluating Semantic Indexing Techniques through Cross-Language Fingerprinting

    Hoenkamp, E.C.M.; Dijk, A.H. van

    2005-01-01

    Users in search of on-line document sources are usually looking for content, not words. Hence, IR researchers generally agree that search techniques should be geared toward the meaning underlying documents rather than toward the text itself. The most visible examples of such techniques are Latent

  20. Applications of the rep-PCR DNA fingerprinting technique to study microbial diversity, ecology and evolution.

    Ishii, Satoshi; Sadowsky, Michael J

    2009-04-01

    A large number of repetitive DNA sequences are found in multiple sites in the genomes of numerous bacteria, archaea and eukarya. While the functions of many of these repetitive sequence elements are unknown, they have proven to be useful as the basis of several powerful tools for use in molecular diagnostics, medical microbiology, epidemiological analyses and environmental microbiology. The repetitive sequence-based PCR or rep-PCR DNA fingerprint technique uses primers targeting several of these repetitive elements and PCR to generate unique DNA profiles or 'fingerprints' of individual microbial strains. Although this technique has been extensively used to examine diversity among variety of prokaryotic microorganisms, rep-PCR DNA fingerprinting can also be applied to microbial ecology and microbial evolution studies since it has the power to distinguish microbes at the strain or isolate level. Recent advancement in rep-PCR methodology has resulted in increased accuracy, reproducibility and throughput. In this minireview, we summarize recent improvements in rep-PCR DNA fingerprinting methodology, and discuss its applications to address fundamentally important questions in microbial ecology and evolution.

  1. Authentication and distinction of Shenmai injection with HPLC fingerprint analysis assisted by pattern recognition techniques

    Xue-Feng Lu

    2012-10-01

    Full Text Available In this paper, the feasibility and advantages of employing high performance liquid chromatographic (HPLC fingerprints combined with pattern recognition techniques for quality control of Shenmai injection were investigated and demonstrated. The Similarity Evaluation System was employed to evaluate the similarities of samples of Shenmai injection, and the HPLC generated chromatographic data were analyzed using hierarchical clustering analysis (HCA and soft independent modeling of class analogy (SIMCA. Consistent results were obtained to show that the authentic samples and the blended samples were successfully classified by SIMCA, which could be applied to accurate discrimination and quality control of Shenmai injection. Furthermore, samples could also be grouped in accordance with manufacturers. Our results revealed that the developed method has potential perspective for the original discrimination and quality control of Shenmai injection. Keywords: Shenmai injection, High performance liquid chromatography, Fingerprint, Pattern recognition

  2. DNA fingerprinting techniques for the analysis of genetic and epigenetic alterations in colorectal cancer.

    Samuelsson, Johanna K; Alonso, Sergio; Yamamoto, Fumiichiro; Perucho, Manuel

    2010-11-10

    Genetic somatic alterations are fundamental hallmarks of cancer. In addition to point and other small mutations targeting cancer genes, solid tumors often exhibit aneuploidy as well as multiple chromosomal rearrangements of large fragments of the genome. Whether somatic chromosomal alterations and aneuploidy are a driving force or a mere consequence of tumorigenesis remains controversial. Recently it became apparent that not only genetic but also epigenetic alterations play a major role in carcinogenesis. Epigenetic regulation mechanisms underlie the maintenance of cell identity crucial for development and differentiation. These epigenetic regulatory mechanisms have been found substantially altered during cancer development and progression. In this review, we discuss approaches designed to analyze genetic and epigenetic alterations in colorectal cancer, especially DNA fingerprinting approaches to detect changes in DNA copy number and methylation. DNA fingerprinting techniques, despite their modest throughput, played a pivotal role in significant discoveries in the molecular basis of colorectal cancer. The aim of this review is to revisit the fingerprinting technologies employed and the oncogenic processes that they unveiled. 2010 Elsevier B.V. All rights reserved.

  3. Evaluation of fingerprinting techniques to assess genotype variation among Zygosaccharomyces strains.

    Dakal, Tikam Chand; Solieri, Lisa; Giudici, Paolo

    2018-06-01

    Molecular typing techniques are key tools in surveillance of food spoilage yeasts, in investigations on intra-species population diversity, and in tracing selected starters during fermentation. Unlike previous works on strain typing of Zygosaccharomyces spoilage species, here Zygosaccharomyces mellis and the Zygosaccharoymces rouxii complex yeasts, which include Z. rouxii, Zygosaccharomyces sapae, and a mosaic lineage (ML) of putatively hybrids, were evaluated by three typing methods for intra- and inter-species resolution. Overall these yeasts are relevant for food fermentation and spoilage, but are quite difficult to discriminate at strain and species level as they evolved by reticulation. A pool of 76 strains from different sources were typed by M13 and (GTG) 5 MSP-PCR fingerprinting and PCR-RFLP of ribosomal intergenic spacer region (IGS). We demonstrated that M13 overcame (GTG) 5 fingerprinting to group Z. sapae, Z. rouxii, Z. mellis and the ML isolates in congruent distinct clusters. Even if (GTG) 5 primer yielded a number of DNA fingerprints comparable with those obtained by M13 primer, it failed to discriminate Z. sapae, Z. mellis and Z. rouxii at species level. Clustering of IGS RFLP patterns obtained with three endonucleases produced groups congruent with species assignment and highlighted intra-species diversity similar to that observed by M13 fingerprinting. However, IGS PCR amplification failed for 14 ML and 6 Z. mellis strains under the experimental conditions tested here, indicating that this marker could be less easy to use in fast typing protocol. Finally, our results posit that the genetic diversity within Z. sapae and Z. mellis could be shaped by isolation source. The information generated in this study would facilitate the monitoring of these yeasts during food processing and storage, and provides preliminary evidences about Z. sapae and Z. mellis intra-species diversity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Collagen Fingerprinting: A New Screening Technique for Radiocarbon Dating Ancient Bone.

    Virginia L Harvey

    Full Text Available Collagen is the dominant organic component of bone and is intimately locked within the hydroxyapatite structure of this ubiquitous biomaterial that dominates archaeological and palaeontological assemblages. Radiocarbon analysis of extracted collagen is one of the most common approaches to dating bone from late Pleistocene or Holocene deposits, but dating is relatively expensive compared to other biochemical techniques. Numerous analytical methods have previously been investigated for the purpose of screening out samples that are unlikely to yield reliable dates including histological analysis, UV-stimulated fluorescence and, most commonly, the measurement of percentage nitrogen (%N and ratio of carbon to nitrogen (C:N. Here we propose the use of collagen fingerprinting (also known as Zooarchaeology by Mass Spectrometry, or ZooMS, when applied to species identification as an alternative screening method for radiocarbon dating, due to its ability to provide information on collagen presence and quality, alongside species identification. The method was tested on a series of sub-fossil bone specimens from cave systems on Cayman Brac (Cayman Islands, chosen due to the observable range in diagenetic alteration, and in particular, the extent of mineralisation. Six (14C dates, of 18 initial attempts, were obtained from remains of extinct hutia, Capromys sp. (Rodentia; Capromyidae, recovered from five distinct caves on Cayman Brac, and ranging from 393 ± 25 to 1588 ± 26 radiocarbon years before present (yr BP. All of the bone samples that yielded radiocarbon dates generated excellent collagen fingerprints, and conversely those that gave poor fingerprints also failed dating. Additionally, two successfully fingerprinted bone samples were screened out from a set of 81. Both subsequently generated (14C dates, demonstrating successful utilisation of ZooMS as an alternative screening mechanism to identify bone samples that are suitable for 1(4C analysis.

  5. Collagen Fingerprinting: A New Screening Technique for Radiocarbon Dating Ancient Bone.

    Harvey, Virginia L; Egerton, Victoria M; Chamberlain, Andrew T; Manning, Phillip L; Buckley, Michael

    2016-01-01

    Collagen is the dominant organic component of bone and is intimately locked within the hydroxyapatite structure of this ubiquitous biomaterial that dominates archaeological and palaeontological assemblages. Radiocarbon analysis of extracted collagen is one of the most common approaches to dating bone from late Pleistocene or Holocene deposits, but dating is relatively expensive compared to other biochemical techniques. Numerous analytical methods have previously been investigated for the purpose of screening out samples that are unlikely to yield reliable dates including histological analysis, UV-stimulated fluorescence and, most commonly, the measurement of percentage nitrogen (%N) and ratio of carbon to nitrogen (C:N). Here we propose the use of collagen fingerprinting (also known as Zooarchaeology by Mass Spectrometry, or ZooMS, when applied to species identification) as an alternative screening method for radiocarbon dating, due to its ability to provide information on collagen presence and quality, alongside species identification. The method was tested on a series of sub-fossil bone specimens from cave systems on Cayman Brac (Cayman Islands), chosen due to the observable range in diagenetic alteration, and in particular, the extent of mineralisation. Six (14)C dates, of 18 initial attempts, were obtained from remains of extinct hutia, Capromys sp. (Rodentia; Capromyidae), recovered from five distinct caves on Cayman Brac, and ranging from 393 ± 25 to 1588 ± 26 radiocarbon years before present (yr BP). All of the bone samples that yielded radiocarbon dates generated excellent collagen fingerprints, and conversely those that gave poor fingerprints also failed dating. Additionally, two successfully fingerprinted bone samples were screened out from a set of 81. Both subsequently generated (14)C dates, demonstrating successful utilisation of ZooMS as an alternative screening mechanism to identify bone samples that are suitable for 1(4)C analysis.

  6. FPRandom: Randomizing core browser objects to break advanced device fingerprinting techniques

    Laperdrix , Pierre; Baudry , Benoit; Mishra , Vikas

    2017-01-01

    International audience; The rich programming interfaces (APIs) provided by web browsers can be diverted to collect a browser fingerprint. A small number of queries on these interfaces are sufficient to build a fingerprint that is statistically unique and very stable over time. Consequently, the fingerprint can be used to track users. Our work aims at mitigating the risk of browser fingerprinting for users privacy by 'breaking' the stability of a fingerprint over time. We add randomness in the...

  7. Police, anthropometry, and fingerprinting: the transnational history of identification systems from Rio de la Plata to Brazil.

    Ferrari, Mercedes García; Galeano, Diego

    2016-12-01

    The article explores the transnational circulation of methods for identifying people in South America. It analyzes both the implementation of the anthropometric system at police departments in Argentina, Uruguay, and Brazil starting in the 1890s, as well as the criticisms that were aimed at this method when fingerprinting took hold in the region in the early twentieth century. In a context of a heavy worldwide flow of ideas, experts, and technologies in policing, "bertillonage" was discussed and underwent hybridization in Latin America. The history of the anthropometric system in these three countries involved many travels by physicians, jurists, and police agents to Paris, debates over its suitability to local contexts, and an open controversy about identification techniques.

  8. Using artificial soil sediment mixtures for calibrating fingerprinting techniques at catchment scale

    Torres Astorga, Romina; Martin, Osvaldo A.; Velasco, Ricardo Hugo; Santos-Villalobos, Sergio de los; Mabit, Lionel; Dercon, Gerd

    2016-01-01

    Soil erosion and related sediment transportation and deposition are key environmental problems in Central Argentina. Certain land use practices, such as intensive grazing, are considered particularly harmful in causing erosion and sediment mobilization. In our studied catchment, Sub Catchment Estancia Grande (630 hectares), 23 km north east from San Luis, characterized by erosive loess soils, we tested sediment source fingerprinting techniques to identify critical hot spots of land degradation, based on the concentration of 43 elements determined by Energy Dispersive X Ray Fluorescence (EDXRF).

  9. A Multimodal Technique for an Embedded Fingerprint Recognizer in Mobile Payment Systems

    V. Conti

    2009-01-01

    Full Text Available The development and the diffusion of distributed systems, directly connected to recent communication technologies, move people towards the era of mobile and ubiquitous systems. Distributed systems make merchant-customer relationships closer and more flexible, using reliable e-commerce technologies. These systems and environments need many distributed access points, for the creation and management of secure identities and for the secure recognition of users. Traditionally, these access points can be made possible by a software system with a main central server. This work proposes the study and implementation of a multimodal technique, based on biometric information, for identity management and personal ubiquitous authentication. The multimodal technique uses both fingerprint micro features (minutiae and fingerprint macro features (singularity points for robust user authentication. To strengthen the security level of electronic payment systems, an embedded hardware prototype has been also created: acting as self-contained sensors, it performs the entire authentication process on the same device, so that all critical information (e.g. biometric data, account transactions and cryptographic keys, are managed and stored inside the sensor, without any data transmission. The sensor has been prototyped using the Celoxica RC203E board, achieving fast execution time, low working frequency, and good recognition performance.

  10. Identification of cow milk in goat milk by nonlinear chemical fingerprint technique.

    Ma, Yong-Jie; Dong, Wen-Bin; Fan, Cheng; Wang, Er-Dan

    2017-10-01

    The objective of this paper was to develop a nonlinear chemical fingerprint technique for identifying and detecting adulteration of goat milk with cow milk. In this study, by taking the Belousov-Zhabotinsky oscillatory chemical reaction using acetone and substrates in goat milk or cow milk as main dissipative substances, when the same dosage of goat milk and cow milk was introduced to the "H +  + Mn 2+  + BrO 3 -  + acetone" oscillating system respectively, nonlinear chemical fingerprints were obtained for goat milk and cow milk from the same origin. The results showed that inductive time value and the content of cow milk in goat milk had a linear relationship in the range of 0-100% and the corresponding regression coefficient was 0.9991. A detection limit of 0.0107 g/g was obtained, and the content of cow milk in mixed milk was calculated. The proposed method in this study was simple, economical and effective. In addition, the method did not need the pretreatment and separation of samples for identifying and evaluating cow milk adulteration in goat milk. Copyright © 2017. Published by Elsevier B.V.

  11. A New Technique in saving Fingerprint with low volume by using Chaos Game and Fractal Theory

    Maryam Ashourzadeh

    2010-12-01

    Full Text Available Fingerprint is one of the simplest and most reliable biometric features of human for identification. In this study by using fractal theory and by the assistance of Chaos Game a new fractal is made from fingerprint. While making the new fractal by using Chaos Game mechanism some parameters, which can be used in identification process, can be deciphered. For this purpose, a fractal is made for each fingerprint, we save 10 parameters for every fingerprint, which have necessary information for identity, as said before. So we save 10 decimal parameters with 0.02 accuracy instead of saving the picture of a fingerprint or some parts of it. Now we improve the great volume of fingerprint pictures by using this model which employs fractal for knowing the personality

  12. Machine-assisted verification of latent fingerprints: first results for nondestructive contact-less optical acquisition techniques with a CWL sensor

    Hildebrandt, Mario; Kiltz, Stefan; Krapyvskyy, Dmytro; Dittmann, Jana; Vielhauer, Claus; Leich, Marcus

    2011-11-01

    A machine-assisted analysis of traces from crime scenes might be possible with the advent of new high-resolution non-destructive contact-less acquisition techniques for latent fingerprints. This requires reliable techniques for the automatic extraction of fingerprint features from latent and exemplar fingerprints for matching purposes using pattern recognition approaches. Therefore, we evaluate the NIST Biometric Image Software for the feature extraction and verification of contact-lessly acquired latent fingerprints to determine potential error rates. Our exemplary test setup includes 30 latent fingerprints from 5 people in two test sets that are acquired from different surfaces using a chromatic white light sensor. The first test set includes 20 fingerprints on two different surfaces. It is used to determine the feature extraction performance. The second test set includes one latent fingerprint on 10 different surfaces and an exemplar fingerprint to determine the verification performance. This utilized sensing technique does not require a physical or chemical visibility enhancement of the fingerprint residue, thus the original trace remains unaltered for further investigations. No particular feature extraction and verification techniques have been applied to such data, yet. Hence, we see the need for appropriate algorithms that are suitable to support forensic investigations.

  13. Breath Analysis Using Laser Spectroscopic Techniques: Breath Biomarkers, Spectral Fingerprints, and Detection Limits

    Peeyush Sahay

    2009-10-01

    Full Text Available Breath analysis, a promising new field of medicine and medical instrumentation, potentially offers noninvasive, real-time, and point-of-care (POC disease diagnostics and metabolic status monitoring. Numerous breath biomarkers have been detected and quantified so far by using the GC-MS technique. Recent advances in laser spectroscopic techniques and laser sources have driven breath analysis to new heights, moving from laboratory research to commercial reality. Laser spectroscopic detection techniques not only have high-sensitivity and high-selectivity, as equivalently offered by the MS-based techniques, but also have the advantageous features of near real-time response, low instrument costs, and POC function. Of the approximately 35 established breath biomarkers, such as acetone, ammonia, carbon dioxide, ethane, methane, and nitric oxide, 14 species in exhaled human breath have been analyzed by high-sensitivity laser spectroscopic techniques, namely, tunable diode laser absorption spectroscopy (TDLAS, cavity ringdown spectroscopy (CRDS, integrated cavity output spectroscopy (ICOS, cavity enhanced absorption spectroscopy (CEAS, cavity leak-out spectroscopy (CALOS, photoacoustic spectroscopy (PAS, quartz-enhanced photoacoustic spectroscopy (QEPAS, and optical frequency comb cavity-enhanced absorption spectroscopy (OFC-CEAS. Spectral fingerprints of the measured biomarkers span from the UV to the mid-IR spectral regions and the detection limits achieved by the laser techniques range from parts per million to parts per billion levels. Sensors using the laser spectroscopic techniques for a few breath biomarkers, e.g., carbon dioxide, nitric oxide, etc. are commercially available. This review presents an update on the latest developments in laser-based breath analysis.

  14. Comparative study of five different DNA fingerprint techniques for molecular typing of Streptococcus pneumoniae strains

    P.W.M. Hermans (Peter); M. Sluijter (Marcel); T. Hoogenboezem (Theo); H. Heersma; A.F. van Belkum (Alex); R. de Groot (Ronald)

    1995-01-01

    textabstractThe aim of this study was to identify the strengths and weaknesses of five DNA fingerprint methods for epidemiological typing of Streptococcus pneumoniae. We investigated the usefulness of (i) ribotyping, (ii) BOX fingerprinting with the BOX repetitive sequence of S.

  15. Forensic assessment of polycyclic aromatic hydrocarbons at the former Sydney Tar Ponds and surrounding environment using fingerprint techniques

    MacAskill, N. Devin; Walker, Tony R.; Oakes, Ken; Walsh, Margaret

    2016-01-01

    Polycyclic aromatic hydrocarbons (PAHs) were assessed spatially and temporally within and adjacent to a former coking and steel manufacturing facility in Sydney, Nova Scotia, Canada. Concentrations of PAHs were measured in surface soils, marine and estuary sediments prior to and during remediation of the Sydney Tar Ponds (STPs) site which was contaminated by nearly a century of coking and steel production. Previous studies identified PAHs in surficial marine sediments within Sydney Harbour, which were considered to be derived from STP discharges. Numerous PAH fingerprint techniques (diagnostic ratios, principal component analysis, quantitative and qualitative analysis) were applied to soil and sediment samples from the STPs and surrounding area to identify common source apportionment of PAHs. Results indicate coal combustion (from historical residential, commercial and industrial uses) and coal handling (from historic on-site stockpiling and current coal transfer and shipment facilities) are likely the principal source of PAHs found in urban soils and marine sediments, consistent with current and historical activities near these sites. However, PAH fingerprints associated with STP sediments correlated poorly with those of urban soils and marine sediments, but were similar to coal tar, historically consistent with by-products produced by the former coking operations. This study suggests PAH contamination of Sydney Harbour sediments and urban soils is largely unrelated to historic coking operations or recent remediation of the STPs site, but rather a legacy of extensive use of coal for a variety of activities. - Highlights: • PAHs were measured in soils and sediments near a former coking and steel facility. • Previous studies identified tar residues as main source of PAHs in marine sediments. • PAH fingerprint techniques were used to identify common source apportionment. • Fingerprint techniques indicated common sources derived from coal, not tar residues

  16. Advanced Fingerprint Analysis Project Fingerprint Constituents

    GM Mong; CE Petersen; TRW Clauss

    1999-10-29

    The work described in this report was focused on generating fundamental data on fingerprint components which will be used to develop advanced forensic techniques to enhance fluorescent detection, and visualization of latent fingerprints. Chemical components of sweat gland secretions are well documented in the medical literature and many chemical techniques are available to develop latent prints, but there have been no systematic forensic studies of fingerprint sweat components or of the chemical and physical changes these substances undergo over time.

  17. Touchless fingerprint biometrics

    Labati, Ruggero Donida; Scotti, Fabio

    2015-01-01

    Offering the first comprehensive analysis of touchless fingerprint-recognition technologies, Touchless Fingerprint Biometrics gives an overview of the state of the art and describes relevant industrial applications. It also presents new techniques to efficiently and effectively implement advanced solutions based on touchless fingerprinting.The most accurate current biometric technologies in touch-based fingerprint-recognition systems require a relatively high level of user cooperation to acquire samples of the concerned biometric trait. With the potential for reduced constraints, reduced hardw

  18. THE CONSTRUCTION OF INDONESIAN-ENGLISH CROSS LANGUAGE PLAGIARISM DETECTION SYSTEM USING FINGERPRINTING TECHNIQUE

    Zakiy Firdaus Alfikri

    2012-07-01

    Full Text Available Cross language plagiarism detection is an important task since it can protect person intellectual property right. Since English is the most popular international language, we proposed an Indonesian-English cross language plagiarism detection to handle such problem in Indonesian-English domain where the suspected plagiarism document is written in Indonesian and the source document is written in English. To minimize translation error, we build the system by translating the Indonesian document into English and then compare the translated document with the English document collection. The detection system consists of preprocess component, heuristic retrieval component, and detailed analysis component. The main technique used in retrieval process is fingerprinting which can extract lexical features from text which is suitable to be used to detect plagiarism done using literal translation method. In this paper, we also propose additional methods to be implemented in heuristic retrieval component to increase the performance of the system: phrase chunking, stop word removal, stemming, and synonym selection. We evaluated system’s performance and the effects of additional methods to system’s performance, provided several data test sets which represents a plagiarism type. From the experiments, we concluded that the system works on 83.33% of test cases. We also concluded that mainly all additional methods except the phrase chunking have good effects in enhancing the system accuracy. Deteksi plagiarisme lintas bahasa merupakan hal yang penting untuk melindungi hak kekayaan intelektual. Bahasa Inggris adalah bahasa internasional yang paling populer, karenanya peneliti mengusulkan deteksi plagiarisme lintas bahasa Indonesia-Inggris untuk menangani masalah tersebut di mana domain dokumen yang diduga plagiat ditulis dalam bahasa Indonesia dan dokumen sumber ditulis dalam bahasa Inggris. Untuk meminimalkan kesalahan terjemahan, peneliti membangun

  19. Identification of sources of tar balls deposited along the Goa coast, India, using fingerprinting techniques

    Suneel, V.; Vethamony, P.; Zakaria, M.P.; Naik, B.G.; Prasad, K.V.

    . Christensen et al (2007) reviewed the practical aspects of chemometrics for oil spill fingerprinting and provided a basis for the use of chemometric 3    methods in tiered oil spill fingerprinting. Biomarker compounds such as isoprenoid alkanes, hopanes... deposited along the Malaysian beaches. Low molecular weight/high molecular weight ratios (L/H) of both alkanes and PAHs together are useful in categorizing the weathering effects of tar balls (Chandru et al., 2008). However, in cases...

  20. Currents trends in the application of IBA techniques to air pollution source fingerprinting and source apportionment

    Cohen, David; Stelcer, Ed.; Atanacio, Armand; Crawford, Jagoda

    2013-01-01

    Full text: IBA techniques have been used for many years to characterise fine particle air pollution. This is not new the techniques are well established. Typically 2-3 MeV protons are used to bombard thin filter papers and up to four simultaneous techniques like PIXE, PIGE, RBS and ERDA will be applied to obtain (μg/g) concentrations for elements from hydrogen to lead. Generally low volume samplers are used to sample between 20-30 m 3 of air over a 24 hour period, this together with IBA's sensitivity means that concentrations down to 1 ng/m 3 of air sampled can be readily achieved with only a few minutes of proton irradiation. With these short irradiation times and low sensitivities for a broad range of elements in the periodic table, large numbers of samples can be obtained and analysed very quickly and easily. At ANSTO we have used IBA methods to acquire a database of over 50,000 filters from 85 different sites through Australia and Asia, each filter has been analysed for more than 21 different chemical species. Large databases extending over many years means that modern statistical techniques like positive matrix factorisation (PMF) can be used to define well characterised source fingerprints and source contributions for a range of different fine particle air pollutants. In this paper we will discuss these PMF techniques and show how they identify both natural sources like sea spray and windblown soils as well as anthropogenic sources like automobiles, biomass burning, coal-fired power stations and industrial emissions. These data are particularly useful for Governments, EPA's and managers of pollution to better understanding pollution sources and their relative contributions and hence to better manage air pollution. Current trends are to take these IBA and PMF techniques a step further and to combine them with wind speed and back trajectory data to better pin point and identify emission sources. We show how this is now being applied on both a local

  1. Currents trends in the application of IBA techniques to air pollution source fingerprinting and source apportionment

    Cohen, David; Stelcer, Ed.; Atanacio, Armand; Crawford, Jagoda [Australian Nuclear Science and Technology Organisation, Kirrawee DC (Australia)

    2013-07-01

    Full text: IBA techniques have been used for many years to characterise fine particle air pollution. This is not new the techniques are well established. Typically 2-3 MeV protons are used to bombard thin filter papers and up to four simultaneous techniques like PIXE, PIGE, RBS and ERDA will be applied to obtain (μg/g) concentrations for elements from hydrogen to lead. Generally low volume samplers are used to sample between 20-30 m{sup 3} of air over a 24 hour period, this together with IBA's sensitivity means that concentrations down to 1 ng/m{sup 3} of air sampled can be readily achieved with only a few minutes of proton irradiation. With these short irradiation times and low sensitivities for a broad range of elements in the periodic table, large numbers of samples can be obtained and analysed very quickly and easily. At ANSTO we have used IBA methods to acquire a database of over 50,000 filters from 85 different sites through Australia and Asia, each filter has been analysed for more than 21 different chemical species. Large databases extending over many years means that modern statistical techniques like positive matrix factorisation (PMF) can be used to define well characterised source fingerprints and source contributions for a range of different fine particle air pollutants. In this paper we will discuss these PMF techniques and show how they identify both natural sources like sea spray and windblown soils as well as anthropogenic sources like automobiles, biomass burning, coal-fired power stations and industrial emissions. These data are particularly useful for Governments, EPA's and managers of pollution to better understanding pollution sources and their relative contributions and hence to better manage air pollution. Current trends are to take these IBA and PMF techniques a step further and to combine them with wind speed and back trajectory data to better pin point and identify emission sources. We show how this is now being applied on both

  2. Fingerprint segmentation: an investigation of various techniques and a parameter study of a variance-based method

    Msiza, IS

    2011-09-01

    Full Text Available Fingerprint image segmentation plays an important role in any fingerprint image analysis implementation and it should, ideally, be executed during the initial stages of a fingerprint manipulation process. After careful consideration of various...

  3. Th effectiveness of soot removal techniques for the recovery of fingerprints on glass fire debris in petrol bomb cases

    Umi Kalthom Ahmad; Mei, Y.S.; Mohd Shahru Bahari; Raramasivam, V.K.

    2011-01-01

    The increased use of petrol bombs as an act of vengeance in Malaysia has heightened awareness for the need of research relating physical evidence found at the crime scene to the perpetrator of the crime. A study was therefore carried out to assess the effectiveness of soot removal techniques on glass fire debris without affecting the fingerprints found on the evidence. Soot was removed using three methods which were brushing, 2 % NaOH solution and tape lifting. Depending on the visibility of prints recovered, prints which were visible after soot removal were lifted directly while prints that were not visible were subjected to enhancement. Glass microscope slides were used in laboratory experiment and subjected to control burn for the formation of soot. Soot was later removed following enhancement of the prints over time (within 1 day, within 2 days and after 2 days). While in simulated petrol bomb ground experiment, petrol bombs were hurled in glass bottles and the fragments were collected. Favorable results were obtained in varying degrees using each soot removal methods. In laboratory testing, brushing and 2 % NaOH solution revealed fingerprints that were visible after removal of excess soot and were lifted directly. As for tape lifting technique, some prints were visible and were successfully lifted while those that were not visible were subjected to super glue fuming for effective fingerprint identification. (author)

  4. Geographical provenance of palm oil by fatty acid and volatile compound fingerprinting techniques.

    Tres, A; Ruiz-Samblas, C; van der Veer, G; van Ruth, S M

    2013-04-15

    Analytical methods are required in addition to administrative controls to verify the geographical origin of vegetable oils such as palm oil in an objective manner. In this study the application of fatty acid and volatile organic compound fingerprinting in combination with chemometrics have been applied to verify the geographical origin of crude palm oil (continental scale). For this purpose 94 crude palm oil samples were collected from South East Asia (55), South America (11) and Africa (28). Partial least squares discriminant analysis (PLS-DA) was used to develop a hierarchical classification model by combining two consecutive binary PLS-DA models. First, a PLS-DA model was built to distinguish South East Asian from non-South East Asian palm oil samples. Then a second model was developed, only for the non-Asian samples, to discriminate African from South American crude palm oil. Models were externally validated by using them to predict the identity of new authentic samples. The fatty acid fingerprinting model revealed three misclassified samples. The volatile compound fingerprinting models showed an 88%, 100% and 100% accuracy for the South East Asian, African and American class, respectively. The verification of the geographical origin of crude palm oil is feasible by fatty acid and volatile compound fingerprinting. Further research is required to further validate the approach and to increase its spatial specificity to country/province scale. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Geographical provenance of palm oil by fatty acid and volatile compound fingerprinting techniques

    Tres, A.; Ruiz - Samblas, C.; Veer, van der G.; Ruth, van S.M.

    2013-01-01

    Analytical methods are required in addition to administrative controls to verify the geographical origin of vegetable oils such as palm oil in an objective manner. In this study the application of fatty acid and volatile organic compound fingerprinting in combination with chemometrics have been

  6. Compositional Signatures of Conventional, Free Range, and Organic Pork Meat Using Fingerprint Techniques

    Gislene B. Oliveira

    2015-08-01

    Full Text Available Consumers’ interest in the way meat is produced is increasing in Europe. The resulting free range and organic meat products retail at a higher price, but are difficult to differentiate from their counterparts. To ascertain authenticity and prevent fraud, relevant markers need to be identified and new analytical methodology developed. The objective of this pilot study was to characterize pork belly meats of different animal welfare classes by their fatty acid (Fatty Acid Methyl Ester—FAME, non-volatile compound (electrospray ionization-tandem mass spectrometry—ESI-MS/MS, and volatile compound (proton-transfer-reaction mass spectrometry—PTR-MS fingerprints. Well-defined pork belly meat samples (13 conventional, 15 free range, and 13 organic originating from the Netherlands were subjected to analysis. Fingerprints appeared to be specific for the three categories, and resulted in 100%, 95.3%, and 95.3% correct identity predictions of training set samples for FAME, ESI-MS/MS, and PTR-MS respectively and slightly lower scores for the validation set. Organic meat was also well discriminated from the other two categories with 100% success rates for the training set for all three analytical approaches. Ten out of 25 FAs showed significant differences in abundance between organic meat and the other categories, free range meat differed significantly for 6 out of the 25 FAs. Overall, FAME fingerprinting presented highest discrimination power.

  7. Compositional Signatures of Conventional, Free Range, and Organic Pork Meat Using Fingerprint Techniques.

    Oliveira, Gislene B; Alewijn, Martin; Boerrigter-Eenling, Rita; van Ruth, Saskia M

    2015-08-25

    Consumers' interest in the way meat is produced is increasing in Europe. The resulting free range and organic meat products retail at a higher price, but are difficult to differentiate from their counterparts. To ascertain authenticity and prevent fraud, relevant markers need to be identified and new analytical methodology developed. The objective of this pilot study was to characterize pork belly meats of different animal welfare classes by their fatty acid (Fatty Acid Methyl Ester-FAME), non-volatile compound (electrospray ionization-tandem mass spectrometry-ESI-MS/MS), and volatile compound (proton-transfer-reaction mass spectrometry-PTR-MS) fingerprints. Well-defined pork belly meat samples (13 conventional, 15 free range, and 13 organic) originating from the Netherlands were subjected to analysis. Fingerprints appeared to be specific for the three categories, and resulted in 100%, 95.3%, and 95.3% correct identity predictions of training set samples for FAME, ESI-MS/MS, and PTR-MS respectively and slightly lower scores for the validation set. Organic meat was also well discriminated from the other two categories with 100% success rates for the training set for all three analytical approaches. Ten out of 25 FAs showed significant differences in abundance between organic meat and the other categories, free range meat differed significantly for 6 out of the 25 FAs. Overall, FAME fingerprinting presented highest discrimination power.

  8. Gabor filter based fingerprint image enhancement

    Wang, Jin-Xiang

    2013-03-01

    Fingerprint recognition technology has become the most reliable biometric technology due to its uniqueness and invariance, which has been most convenient and most reliable technique for personal authentication. The development of Automated Fingerprint Identification System is an urgent need for modern information security. Meanwhile, fingerprint preprocessing algorithm of fingerprint recognition technology has played an important part in Automatic Fingerprint Identification System. This article introduces the general steps in the fingerprint recognition technology, namely the image input, preprocessing, feature recognition, and fingerprint image enhancement. As the key to fingerprint identification technology, fingerprint image enhancement affects the accuracy of the system. It focuses on the characteristics of the fingerprint image, Gabor filters algorithm for fingerprint image enhancement, the theoretical basis of Gabor filters, and demonstration of the filter. The enhancement algorithm for fingerprint image is in the windows XP platform with matlab.65 as a development tool for the demonstration. The result shows that the Gabor filter is effective in fingerprint image enhancement technology.

  9. Recognition of Activities of Daily Living Based on Environmental Analyses Using Audio Fingerprinting Techniques: A Systematic Review

    Ivan Miguel Pires

    2018-01-01

    Full Text Available An increase in the accuracy of identification of Activities of Daily Living (ADL is very important for different goals of Enhanced Living Environments and for Ambient Assisted Living (AAL tasks. This increase may be achieved through identification of the surrounding environment. Although this is usually used to identify the location, ADL recognition can be improved with the identification of the sound in that particular environment. This paper reviews audio fingerprinting techniques that can be used with the acoustic data acquired from mobile devices. A comprehensive literature search was conducted in order to identify relevant English language works aimed at the identification of the environment of ADLs using data acquired with mobile devices, published between 2002 and 2017. In total, 40 studies were analyzed and selected from 115 citations. The results highlight several audio fingerprinting techniques, including Modified discrete cosine transform (MDCT, Mel-frequency cepstrum coefficients (MFCC, Principal Component Analysis (PCA, Fast Fourier Transform (FFT, Gaussian mixture models (GMM, likelihood estimation, logarithmic moduled complex lapped transform (LMCLT, support vector machine (SVM, constant Q transform (CQT, symmetric pairwise boosting (SPB, Philips robust hash (PRH, linear discriminant analysis (LDA and discrete cosine transform (DCT.

  10. Data Compression of Fingerprint Minutiae

    VISHAL SHRIVASTAVA; SUMIT SHARMA

    2012-01-01

    Biometric techniques have usual advantages over conventional personal identification technique. Among various commercially available biometric techniques such as face, fingerprint, Iris etc., fingerprint-based techniques are the most accepted recognition system. Fingerprints are trace or impression of patterns created byfriction ridges of the skin in the fingers and thumbs. Steganography usually used in smart card is a safe technique for authenticating a person. In steganography, biometric ch...

  11. Dna fingerprinting - review paper

    Blundell, Renald

    2006-01-01

    Before the Polymerase Chain Reaction (PCR) was established, DNA fingerprinting technology has relied for years on Restriction Fragment Length Polymorphism (RFLP) and Variable Number of Tandom Repeats (VNTR) analysis, a very efficient technique but quite laborious and not suitable for high throughput mapping. Since its, development, PCR has provided a new and powerful tool for DNA fingerprinting.

  12. Chromatographic fingerprinting through chemometric techniques for herbal slimming pills: A way of adulterant identification.

    Shekari, Nafiseh; Vosough, Maryam; Tabar Heidar, Kourosh

    2018-05-01

    In the current study, gas chromatography-mass spectrometry (GC-MS) fingerprinting of herbal slimming pills assisted by chemometric methods has been presented. Deconvolution of two-way chromatographic signals of nine herbal slimming pills into pure chromatographic and spectral patterns was performed. The peak clusters were resolved using multivariate curve resolution-alternating least squares (MCR-ALS) by employing appropriate constraints. It was revealed that more useful chemical information about the composition of the slimming pills can be obtained by employing sophisticated GC-MS method coupled with proper chemometric tools yielding the extended number of identified constituents. The thorough fingerprinting of the complex mixtures proved the presence of some toxic or carcinogen components, such as toluene, furfural, furfuryl alcohol, styrene, itaconic anhydride, citraconic anhydride, trimethyl phosphate, phenol, pyrocatechol, p-propenylanisole and pyrogallol. In addition, some samples were shown to be adulterated with undeclared ingredients, including stimulants, anorexiant and laxatives such as phenolphthalein, amfepramone, caffeine and sibutramine. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Identification of sources of tar balls deposited along the Goa coast, India, using fingerprinting techniques

    Suneel, V.; Vethamony, P.; Zakaria, M.P.; Naik, B.G.; Prasad, K.V.S.R.

    2013-01-01

    Highlights: ► This is first fingerprinting study in India on identification of source of tar balls. ► Tar balls were formed from tanker-wash spills and they resemble floating tar ball. ► δ 13 C values of Bombay High crude oil and the present tar balls do not match. ► Compound specific stable carbon isotope analysis confirmed the source of tar balls. ► Source is confirmed as the South East Asian Crude Oil and not the Bombay High crude. -- Abstract: Deposition of tar balls along the coast of Goa, India is a common phenomenon during the southwest monsoon. Representative tar ball samples collected from various beaches of Goa and one Bombay High (BH) crude oil sample were subjected to fingerprint analysis based on diagnostic ratios of n-alkane, biomarkers of pentacyclic tri-terpanes and compound specific stable carbon isotope (δ 13 C) analysis to confirm the source. The results were compared with the published data of Middle East Crude Oil (MECO) and South East Asian Crude Oil (SEACO). The results revealed that the tar balls were from tanker-wash derived spills. The study also confirmed that the source is not the BH, but SEACO. The present study suggests that the biomarkers of alkanes and hopanes coupled with stable carbon isotope analysis act as a powerful tool for tracing the source of tar balls, particularly when the source specific biomarkers fail to distinguish the source

  14. Ion beam analysis techniques for the elemental fingerprinting of fine particle smoke from vegetation burning in NSW

    Cohen, D. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1996-12-31

    Accelerator based ion beam analysis (IBA) techniques, including PIXE, PIGME, RBS and PESA, have been used to analyse elemental compositions of airborne particles covering a 60,000 square kilometres area of Wollongong, Sydney and Newcastle. These IBA techniques provide elemental concentrations for over 20 different elements from hydrogen to lead, they include H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Zn, Br and Pb. The four ion beam techniques are performed simultaneously on the 3MV Van de Graaff accelerator at ANSTO and have been described in detail elsewhere. They are sufficiently sensitive to analyse for many of these elements to levels around 10 ng/m{sup 3} or less in about five minutes of accelerator running time per filter. This is more than adequate for aerosol analyses as most filters contain around 150 {mu}g/cm{sup 2} of material which corresponds to about 10{mu}g/m{sup 3} of fine particles in the atmosphere. For this work fine particles are those with diameters less than 2.5{mu}m. Fine particle data has been collected twice a week and analysed for each of the above elements by ANSTO since 1991 at more than 25 different sites throughout NSW. This large dataset set allows us to not only determine the composition of fine particles and to look for signature elements for particular sources but also to use multivariate statistics to define elemental source fingerprints and then to determine the percentage contributions of these fingerprints to the total fine particle mass in the atmosphere. This paper describes the application of these techniques to the study of domestic wood fires and vegetation burning in NSW over a two year period from 1992-93. It also presents, for the first time, fine particle data related to the January 1994 bushfires in NSW. 6 refs., 1 tab., 5 figs.

  15. Ion beam analysis techniques for the elemental fingerprinting of fine particle smoke from vegetation burning in NSW

    Cohen, D [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1997-12-31

    Accelerator based ion beam analysis (IBA) techniques, including PIXE, PIGME, RBS and PESA, have been used to analyse elemental compositions of airborne particles covering a 60,000 square kilometres area of Wollongong, Sydney and Newcastle. These IBA techniques provide elemental concentrations for over 20 different elements from hydrogen to lead, they include H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Zn, Br and Pb. The four ion beam techniques are performed simultaneously on the 3MV Van de Graaff accelerator at ANSTO and have been described in detail elsewhere. They are sufficiently sensitive to analyse for many of these elements to levels around 10 ng/m{sup 3} or less in about five minutes of accelerator running time per filter. This is more than adequate for aerosol analyses as most filters contain around 150 {mu}g/cm{sup 2} of material which corresponds to about 10{mu}g/m{sup 3} of fine particles in the atmosphere. For this work fine particles are those with diameters less than 2.5{mu}m. Fine particle data has been collected twice a week and analysed for each of the above elements by ANSTO since 1991 at more than 25 different sites throughout NSW. This large dataset set allows us to not only determine the composition of fine particles and to look for signature elements for particular sources but also to use multivariate statistics to define elemental source fingerprints and then to determine the percentage contributions of these fingerprints to the total fine particle mass in the atmosphere. This paper describes the application of these techniques to the study of domestic wood fires and vegetation burning in NSW over a two year period from 1992-93. It also presents, for the first time, fine particle data related to the January 1994 bushfires in NSW. 6 refs., 1 tab., 5 figs.

  16. Ion beam analysis techniques for the elemental fingerprinting of fine particle smoke from vegetation burning in NSW

    Cohen, D.

    1996-01-01

    Accelerator based ion beam analysis (IBA) techniques, including PIXE, PIGME, RBS and PESA, have been used to analyse elemental compositions of airborne particles covering a 60,000 square kilometres area of Wollongong, Sydney and Newcastle. These IBA techniques provide elemental concentrations for over 20 different elements from hydrogen to lead, they include H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Zn, Br and Pb. The four ion beam techniques are performed simultaneously on the 3MV Van de Graaff accelerator at ANSTO and have been described in detail elsewhere. They are sufficiently sensitive to analyse for many of these elements to levels around 10 ng/m 3 or less in about five minutes of accelerator running time per filter. This is more than adequate for aerosol analyses as most filters contain around 150 μg/cm 2 of material which corresponds to about 10μg/m 3 of fine particles in the atmosphere. For this work fine particles are those with diameters less than 2.5μm. Fine particle data has been collected twice a week and analysed for each of the above elements by ANSTO since 1991 at more than 25 different sites throughout NSW. This large dataset set allows us to not only determine the composition of fine particles and to look for signature elements for particular sources but also to use multivariate statistics to define elemental source fingerprints and then to determine the percentage contributions of these fingerprints to the total fine particle mass in the atmosphere. This paper describes the application of these techniques to the study of domestic wood fires and vegetation burning in NSW over a two year period from 1992-93. It also presents, for the first time, fine particle data related to the January 1994 bushfires in NSW. 6 refs., 1 tab., 5 figs

  17. Physics and fingerprints

    Voss-de Haan, Patrick

    2006-08-01

    This article discusses a variety of aspects in the detection and development of fingerprints and the physics involved in it. It gives an introduction to some basic issues like composition and properties of fingerprint deposits and a rudimentary framework of dactyloscopy; it covers various techniques for the visualization of latent fingerprints; and it concludes with a view of current research topics. The techniques range from very common procedures, such as powdering and cyanoacrylate fuming, to more demanding methods, for example luminescence and vacuum metal deposition, to fairly unusual approaches like autoradiography. The emphasis is placed on the physical rather than the forensic aspects of these topics while trying to give the physicist—who is not dealing with fingerprinting and forensic science on a daily basis—a feeling for the problems and solutions in the visualization of latent fingerprints.

  18. Exploring innovative techniques for identifying geochemical elements as fingerprints of sediment sources in an agricultural catchment of Argentina affected by soil erosion.

    Torres Astorga, Romina; de Los Santos Villalobos, Sergio; Velasco, Hugo; Domínguez-Quintero, Olgioly; Pereira Cardoso, Renan; Meigikos Dos Anjos, Roberto; Diawara, Yacouba; Dercon, Gerd; Mabit, Lionel

    2018-05-15

    Identification of hot spots of land degradation is strongly related with the selection of soil tracers for sediment pathways. This research proposes the complementary and integrated application of two analytical techniques to select the most suitable fingerprint tracers for identifying the main sources of sediments in an agricultural catchment located in Central Argentina with erosive loess soils. Diffuse reflectance Fourier transformed in the mid-infrared range (DRIFT-MIR) spectroscopy and energy-dispersive X-ray fluorescence (EDXRF) were used for a suitable fingerprint selection. For using DRIFT-MIR spectroscopy as fingerprinting technique, calibration through quantitative parameters is needed to link and correlate DRIFT-MIR spectra with soil tracers. EDXRF was used in this context for determining the concentrations of geochemical elements in soil samples. The selected tracers were confirmed using two artificial mixtures composed of known proportions of soil collected in different sites with distinctive soil uses. These fingerprint elements were used as parameters to build a predictive model with the whole set of DRIFT-MIR spectra. Fingerprint elements such as phosphorus, iron, calcium, barium, and titanium were identified for obtaining a suitable reconstruction of the source proportions in the artificial mixtures. Mid-infrared spectra produced successful prediction models (R 2  = 0.91) for Fe content and moderate useful prediction (R 2  = 0.72) for Ti content. For Ca, P, and Ba, the R 2 were 0.44, 0.58, and 0.59 respectively.

  19. Reference point detection for improved fingerprint matching

    Ignatenko, T.; Kalker, A.A.C.M.; Veen, van der M.; Bazen, A.; Delp, E.J.; Wong, P.W.

    2006-01-01

    One of the important stages of fingerprint recognition is the registration of the fingerprints with respect to the original template. This is not a straightforward task as fingerprint images may have been subject to rotations and translations. Popular techniques for fingerprint registration use a

  20. Enhancing the Security of Customer Data in Cloud Environments Using a Novel Digital Fingerprinting Technique

    Nithya Chidambaram

    2016-01-01

    Full Text Available With the rapid rise of the Internet and electronics in people’s life, the data related to it has also undergone a mammoth increase in magnitude. The data which is stored in the cloud can be sensitive and at times needs a proper file storage system with a tough security algorithm. Whereas cloud is an open shareable elastic environment, it needs impenetrable and airtight security. This paper deals with furnishing a secure storage system for the above-mentioned purpose in the cloud. To become eligible to store data a user has to register with the cloud database. This prevents unauthorized access. The files stored in the cloud are encrypted with RSA algorithm and digital fingerprint for the same has been generated through MD5 message digest before storage. The RSA provides unreadability of data to anyone without the private key. MD5 makes it impossible for any changes on data to go unnoticed. After the application of RSA and MD5 before storage, the data becomes resistant to access or modifications by any third party and to intruders of cloud storage system. This application is tested in Amazon Elastic Compute Cloud Web Services.

  1. Research and realization of ten-print data quality control techniques for imperial scale automated fingerprint identification system

    Qian Wang

    2017-01-01

    Full Text Available As the first individualization-information processing equipment put into practical service worldwide, Automated Fingerprint Identification System (AFIS has always been regarded as the first choice in individualization of criminal suspects or those who died in mass disasters. By integrating data within the existing regional large-scale AFIS database, many countries are constructing an ultra large state-of-the-art AFIS (or Imperial Scale AFIS system. Therefore, it is very important to develop a series of ten-print data quality controlling process for this system of this type, which would insure a substantial matching efficiency, as the pouring data come into this imperial scale being. As the image quality of ten-print data is closely relevant to AFIS matching proficiency, a lot of police departments have allocated huge amount of human and financial resources over this issue by carrying out manual verification works for years. Unfortunately, quality control method above is always proved to be inadequate because it is an astronomical task involved, in which it has always been problematic and less affiant for potential errors. Hence, we will implement quality control in the above procedure with supplementary-acquisition effect caused by the delay of feedback instructions sent from the human verification teams. In this article, a series of fingerprint image quality supervising techniques has been put forward, which makes it possible for computer programs to supervise the ten-print image quality in real-time and more accurate manner as substitute for traditional manual verifications. Besides its prominent advantages in the human and financial expenditures, it has also been proved to obviously improve the image quality of the AFIS ten-print database, which leads up to a dramatic improvement in the AFIS-matching accuracy as well.

  2. The Influence of Selected Fingerprint Enhancement Techniques on Forensic DNA Typing of Epithelial Cells Deposited on Porous Surfaces.

    Tsai, Li-Chin; Lee, Cheng-Chang; Chen, Chun-Chieh; Lee, James Chun-I; Wang, Sheng-Meng; Huang, Nu-En; Linacre, Adrian; Hsieh, Hsing-Mei

    2016-01-01

    Fingerprints deposited at crime scene can be a source of DNA. Previous reports on the effects of fingerprint enhancement methods have focused mainly on fingermarks deposited in blood or saliva. Here, we evaluate the effects of fingerprint enhancement methods on fingerprints deposited on porous surfaces. We performed real-time quantification and STR typing, the results of which indicated that two methods (iodine fuming and 1,2-indanedione in ethyl acetate enhancement) had no effect on the quantity of DNA isolated and resultant STR alleles when compared to control samples. DNA quantities and allele numbers were lower for samples enhanced with silver nitrate and 1,2-indanedione in acetic acid when compared to control samples. Based on DNA quantity, quality, and observable stochastic effects, our data indicated that iodine fuming and 1,2-indanedione in ethyl acetate were the preferred options for the enhancement of fingerprints on porous surfaces. © 2015 American Academy of Forensic Sciences.

  3. Information Theoretical Analysis of Identification based on Active Content Fingerprinting

    Farhadzadeh, Farzad; Willems, Frans M. J.; Voloshinovskiy, Sviatoslav

    2014-01-01

    Content fingerprinting and digital watermarking are techniques that are used for content protection and distribution monitoring. Over the past few years, both techniques have been well studied and their shortcomings understood. Recently, a new content fingerprinting scheme called {\\em active content fingerprinting} was introduced to overcome these shortcomings. Active content fingerprinting aims to modify a content to extract robuster fingerprints than the conventional content fingerprinting....

  4. Applied nuclear γ-resonance as fingerprint technique in geochemistry and mineralogy

    Constantinescu, S.

    2003-01-01

    The aim of the present paper is to evidence the new developments of one of the most refined technique, the nuclear γ resonance or the well-known Moessbauer effect, in the field of mineralogical and geo-chemical investigation. There are many Moessbauer studies on minerals, but the development, the new performance of the Moessbauer equipment and of the computers impose to review more profoundly and more thoroughly the information, which this non-destructive technique offers. This task became more and more pressingly because a lot of minerals contain in high proportion, the Moessbauer isotopes. Generally, the mineralogists, physicists and chemists hope to obtain more refined and complete information about the physics and chemistry synthesis aspects in solid state transformation of some natural and synthetic materials and also about the structural aspects, by these kind of techniques. On this line, the authors very shortly review the principal aspects of the Moessbauer spectroscopy and underline the most important information one can obtain from spectra. The recent results, which have been obtained on minerals extracted from Romanian geological deposits by the authors, will be discussed in detail in the second part of this article. (authors)

  5. Fingerprint matching with optical coherence tomography

    Moolla, Y

    2015-12-01

    Full Text Available Fingerprint recognition is an important security technique with a steadily growing usage for the identification and verification of individuals. However, current fingerprint acquisition systems have certain disadvantages, which include...

  6. Remote sensing techniques for monitoring the Rio Grande Valley cotton stalk destruction program

    Richardson, A.J.; Gerbermann, A.H.; Summy, K.R.; Anderson, G.L. (Department of Agriculture, Weslaco, TX (United States))

    1993-09-01

    Post harvest cotton (Gossypium hirsutum L.) stalk destruction is a cultural practice used in the Rio Grande Valley to suppress over wintering populations of boll weevils (Anthonomus grandis Boheman) without using chemicals. Consistent application of this practice could substantially reduce insecticide usage, thereby minimizing environmental hazards and increasing cotton production profits. Satellite imagery registered within a geographic information system was used to monitor the cotton stalk destruction program in the Rio Grande Valley. We found that cotton stalk screening procedures based on standard multispectral classification techniques could not reliably distinguish cotton from sorghum. Greenness screening for cotton plant stalks after the stalk destruction deadline was possible only where ground observations locating cotton fields were available. These findings indicate that a successful cotton stalk destruction monitoring program will require satellite images and earth referenced data bases showing cotton field locations.

  7. The examination of Hevea brasiliensis plants produced by in vitro culture and mutagenesis by DNA fingerprinting techniques

    Low, F.C.; Atan, S.; Jaafar, H.

    1998-01-01

    Rubber (Hevea brasiliensis) plants derived from anther and ovule culture as well as gamma-irradiated plants were examined by several DNA marker techniques. These include restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNA (RAPD), sequence tagged microsatellite sites (STMS), DNA amplification fingerprinting (DAF) and amplified fragment length polymorphisms (AFLPs). Compared to control plants produced by vegetative propagation (cutting and budding), plants produced by in vitro culture appeared to have a reduction in the number of rDNA loci. Two RAPD protocols were compared and found to be similar in amplification of the major DNA bands. After confirmation that the RAPD method adopted was reproducible, the technique was applied to the present studies. Eight out of the 60 primers screened were able to elicit polymorphisms between pooled DNA from in vitro culture plants. Variations in DNA patterns were observed between pooled DNA samples of anther-derived plants as well as between anther-derived and ovule-derived plants. Comparisons of RAPD patterns obtained between anther-derived plants exposed to increasing dosages of gamma-irradiation with non irradiated anther-derived plants revealed distinct DNA polymorphisms. The changes in DNA profiles did not appear to be correlated to the dosage of irradiation. Since somaclonal variation was detected, it was difficult to identify changes which were specifically caused by irradiation. Application of the STMS technique to tag micro satellite sequences (GA) n , (TA) n and (TTA) n in the hydroxymethylglutaryl coenzyme A reductase-1 (hmgr-1) gene failed to detect differences between plants derived from anther and ovule culture. Although restriction endonuclease digestions with methylation sensitive enzymes suggested that four in vitro culture plants examined exhibited similar digestion patterns as the controls, a change in cytosine methylation in one anther-derived plant was detected. Examination of

  8. Metabolomic Fingerprints of Individual Algal Cells Using the Single-Probe Mass Spectrometry Technique

    Mei Sun

    2018-04-01

    Full Text Available Traditional approaches for the assessment of physiological responses of microbes in the environment rely on bulk filtration techniques that obscure differences among populations as well as among individual cells. Here, were report on the development on a novel micro-scale sampling device, referred to as the “Single-probe,” which allows direct extraction of metabolites from living, individual phytoplankton cells for mass spectrometry (MS analysis. The Single-probe is composed of dual-bore quartz tubing which is pulled using a laser pipette puller and fused to a silica capillary and a nano-ESI. For this study, we applied Single-probe MS technology to the marine dinoflagellate Scrippsiella trochoidea, assaying cells grown under different illumination levels and under nitrogen (N limiting conditions as a proof of concept for the technology. In both experiments, significant differences in the cellular metabolome of individual cells could readily be identified, though the vast majority of detected metabolites could not be assigned to KEGG pathways. Using the same approach, significant changes in cellular lipid complements were observed, with individual lipids being both up- and down-regulated under light vs. dark conditions. Conversely, lipid content increased across the board under N limitation, consistent with an adjustment of Redfield stoichiometry to reflect higher C:N and C:P ratios. Overall, these data suggest that the Single-probe MS technique has the potential to allow for near in situ metabolomic analysis of individual phytoplankton cells, opening the door to targeted analyses that minimize cell manipulation and sampling artifacts, while preserving metabolic variability at the cellular level.

  9. Forensic Chemistry: The Revelation of Latent Fingerprints

    Friesen, J. Brent

    2015-01-01

    The visualization of latent fingerprints often involves the use of a chemical substance that creates a contrast between the fingerprint residues and the surface on which the print was deposited. The chemical-aided visualization techniques can be divided into two main categories: those that chemically react with the fingerprint residue and those…

  10. Fingerprint separation: an application of ICA

    Singh, Meenakshi; Singh, Deepak Kumar; Kalra, Prem Kumar

    2008-04-01

    Among all existing biometric techniques, fingerprint-based identification is the oldest method, which has been successfully used in numerous applications. Fingerprint-based identification is the most recognized tool in biometrics because of its reliability and accuracy. Fingerprint identification is done by matching questioned and known friction skin ridge impressions from fingers, palms, and toes to determine if the impressions are from the same finger (or palm, toe, etc.). There are many fingerprint matching algorithms which automate and facilitate the job of fingerprint matching, but for any of these algorithms matching can be difficult if the fingerprints are overlapped or mixed. In this paper, we have proposed a new algorithm for separating overlapped or mixed fingerprints so that the performance of the matching algorithms will improve when they are fed with these inputs. Independent Component Analysis (ICA) has been used as a tool to separate the overlapped or mixed fingerprints.

  11. A reliable and reproducible technique for DNA fingerprinting in biorepositories: a pilot study from BioBIM.

    Palmirotta, Raffaele; De Marchis, Maria Laura; Ludovici, Giorgia; Ialongo, Cristiano; Leone, Barbara; Lopez, Nadia; Valente, Maria Giovanna; Spila, Antonella; Ferroni, Patrizia; Della-Morte, David; Guadagni, Fiorella

    2013-12-17

    Standard operating procedures (SOPs) optimization for nucleic acid extraction from stored samples is of crucial importance in a biological repository, considering the large number of collected samples and their future downstream molecular and biological applications. However, the validity of molecular studies using stored specimens depends not only on the integrity of the biological samples, but also on the procedures that ensure the traceability of the same sample, certifying its uniqueness, and ensuring the identification of potential sample contaminations. With this aim, we have developed a rapid, reliable, low-cost, and simple DNA fingerprinting tool for a routine use in quality control of biorepositories samples. The method consists of a double ALU insertion/deletion genotyping panel suitable for uniqueness, identification of sample contaminations, and gender validation. Preliminary data suggest that this easy-to-use DNA fingerprinting protocol could routinely provide assurances of DNA identity and quality in a biorepository setting.

  12. Use of LH-PCR as a DNA fingerprint technique to trace sediment-associated microbial communities from various land uses

    Joe-Strack, J. A.; Petticrew, E. L.

    2012-04-01

    The search for new techniques to effectively and efficiently trace sediment from its source along catchment pathways continues, with a range of new methods being developed and tested annually. A relatively recent approach marries genetic techniques to sediment analysis in order to characterize and differentiate the bacterial populations associated with soil and/or sediment originating from specific locations. Here we present the preliminary results of DNA fingerprint profiles of soil and sediment-associated bacterial communities in and around two different industrial land uses in the central interior of British Columbia, a feedlot and a copper/gold mining site. We assessed the naturally varying 16S rDNA gene using amplicon length heterogeneity-polymerase chain reaction (LH-PCR). Statistical differences between bacterial community profiles were investigated using a suite of methods of which non-metric multidimensional scaling (NMS) and indicator species analysis (ISA) were the most useful. Stronger statistical results were observed for the feedlot data set with spatial differences observed from the source location and within the adjacent creek. Results from the mine site were more difficult to assess although responses were detected in downstream waterways. While bacterial DNA fingerprinting of soil and sediment appears to be a promising tracing technique issues of scale and transferability may limit its use. Lessons learned from this preliminary study will be presented.

  13. Development of a multiplexing fingerprint and high wavenumber Raman spectroscopy technique for real-time in vivo tissue Raman measurements at endoscopy

    Bergholt, Mads Sylvest; Zheng, Wei; Huang, Zhiwei

    2013-03-01

    We report on the development of a novel multiplexing Raman spectroscopy technique using a single laser light together with a volume phase holographic (VPH) grating that simultaneously acquires both fingerprint (FP) and high wavenumber (HW) tissue Raman spectra at endoscopy. We utilize a customized VPH dual-transmission grating, which disperses the incident Raman scattered light vertically onto two separate segments (i.e., -150 to 1950 cm-1 1750 to 3600 cm-1) of a charge-coupled device camera. We demonstrate that the multiplexing Raman technique can acquire high quality in vivo tissue Raman spectra ranging from 800 to 3600 cm-1 within 1.0 s with a spectral resolution of 3 to 6 cm-1 during clinical endoscopy. The rapid multiplexing Raman spectroscopy technique covering both FP and HW ranges developed in this work has potential for improving in vivo tissue diagnosis and characterization at endoscopy.

  14. Cognitive Fingerprints

    2015-03-25

    is another cognitive fingerprint that has been used extensively for authorship . This work has been ex- tended to authentication by relating keyboard...this work is the inference of high-level features such as personality, gender , and dominant hand but those features have not been integrated to date

  15. Fingerprint fake detection by optical coherence tomography

    Meissner, Sven; Breithaupt, Ralph; Koch, Edmund

    2013-03-01

    The most established technique for the identification at biometric access control systems is the human fingerprint. While every human fingerprint is unique, fingerprints can be faked very easily by using thin layer fakes. Because commercial fingerprint scanners use only a two-dimensional image acquisition of the finger surface, they can only hardly differentiate between real fingerprints and fingerprint fakes applied on thin layer materials. A Swept Source OCT system with an A-line rate of 20 kHz and a lateral and axial resolution of approximately 13 μm, a centre wavelength of 1320 nm and a band width of 120 nm (FWHM) was used to acquire fingerprints and finger tips with overlying fakes. Three-dimensional volume stacks with dimensions of 4.5 mm x 4 mm x 2 mm were acquired. The layering arrangement of the imaged finger tips and faked finger tips was analyzed and subsequently classified into real and faked fingerprints. Additionally, sweat gland ducts were detected and consulted for the classification. The manual classification between real fingerprints and faked fingerprints results in almost 100 % correctness. The outer as well as the internal fingerprint can be recognized in all real human fingers, whereby this was not possible in the image stacks of the faked fingerprints. Furthermore, in all image stacks of real human fingers the sweat gland ducts were detected. The number of sweat gland ducts differs between the test persons. The typical helix shape of the ducts was observed. In contrast, in images of faked fingerprints we observe abnormal layer arrangements and no sweat gland ducts connecting the papillae of the outer fingerprint and the internal fingerprint. We demonstrated that OCT is a very useful tool to enhance the performance of biometric control systems concerning attacks by thin layer fingerprint fakes.

  16. Towards secondary fingerprint classification

    Msiza, IS

    2011-07-01

    Full Text Available an accuracy figure of 76.8%. This small difference between the two figures is indicative of the validity of the proposed secondary classification module. Keywords?fingerprint core; fingerprint delta; primary classifi- cation; secondary classification I..., namely, the fingerprint core and the fingerprint delta. Forensically, a fingerprint core is defined as the innermost turning point where the fingerprint ridges form a loop, while the fingerprint delta is defined as the point where these ridges form a...

  17. A Support Vector Machine Approach for Truncated Fingerprint Image Detection from Sweeping Fingerprint Sensors

    Chen, Chi-Jim; Pai, Tun-Wen; Cheng, Mox

    2015-01-01

    A sweeping fingerprint sensor converts fingerprints on a row by row basis through image reconstruction techniques. However, a built fingerprint image might appear to be truncated and distorted when the finger was swept across a fingerprint sensor at a non-linear speed. If the truncated fingerprint images were enrolled as reference targets and collected by any automated fingerprint identification system (AFIS), successful prediction rates for fingerprint matching applications would be decreased significantly. In this paper, a novel and effective methodology with low time computational complexity was developed for detecting truncated fingerprints in a real time manner. Several filtering rules were implemented to validate existences of truncated fingerprints. In addition, a machine learning method of supported vector machine (SVM), based on the principle of structural risk minimization, was applied to reject pseudo truncated fingerprints containing similar characteristics of truncated ones. The experimental result has shown that an accuracy rate of 90.7% was achieved by successfully identifying truncated fingerprint images from testing images before AFIS enrollment procedures. The proposed effective and efficient methodology can be extensively applied to all existing fingerprint matching systems as a preliminary quality control prior to construction of fingerprint templates. PMID:25835186

  18. A Support Vector Machine Approach for Truncated Fingerprint Image Detection from Sweeping Fingerprint Sensors

    Chi-Jim Chen

    2015-03-01

    Full Text Available A sweeping fingerprint sensor converts fingerprints on a row by row basis through image reconstruction techniques. However, a built fingerprint image might appear to be truncated and distorted when the finger was swept across a fingerprint sensor at a non-linear speed. If the truncated fingerprint images were enrolled as reference targets and collected by any automated fingerprint identification system (AFIS, successful prediction rates for fingerprint matching applications would be decreased significantly. In this paper, a novel and effective methodology with low time computational complexity was developed for detecting truncated fingerprints in a real time manner. Several filtering rules were implemented to validate existences of truncated fingerprints. In addition, a machine learning method of supported vector machine (SVM, based on the principle of structural risk minimization, was applied to reject pseudo truncated fingerprints containing similar characteristics of truncated ones. The experimental result has shown that an accuracy rate of 90.7% was achieved by successfully identifying truncated fingerprint images from testing images before AFIS enrollment procedures. The proposed effective and efficient methodology can be extensively applied to all existing fingerprint matching systems as a preliminary quality control prior to construction of fingerprint templates.

  19. Mass spectrometry imaging of illicit drugs in latent fingerprints by matrix-free and matrix-assisted desorption/ionization techniques.

    Skriba, Anton; Havlicek, Vladimir

    2018-02-01

    Compared with classical matrix-assisted laser-desorption ionization mass spectrometry (MALDI), the matrix free-based strategies generate a cleaner background, without significant noise or interference coming from an applied matrix, which is beneficial for the analysis of small molecules, such as drugs of abuse. In this work, we probed the detection efficiency of methamphetamine, heroin and cocaine in nanostructure-assisted laser desorption-ionization (NALDI) and desorption electrospray ionization and compared the sensitivity of these two matrix-free tools with a standard MALDI mass spectrometry experiment. In a typical mass spectrometry imaging (MSI) setup, papillary line latent fingerprints were recorded as a mixture a common skin fatty acid or interfering cosmetics with a drug. In a separate experiment, all drugs (1 µL of 1 μM standard solution) were detected by all three ionization techniques on a target. In the case of cocaine and heroin, NALDI mass spectrometry was the most sensitive and revealed signals even from 0.1 μM solution. The drug/drug contaminant (fatty acid or cosmetics) MSI approach could be used by law enforcement personnel to confirm drug abusers of having come into contact with the suspected drug by use of fingerprint scans at time of apprehension which can aid in reducing the work of lab officials.

  20. Chemical Fingerprinting of Materials Developed Due To Environmental Issues

    Smith, Doris A.; McCool, A. (Technical Monitor)

    2000-01-01

    This paper presents viewgraphs on chemical fingerprinting of materials developed due to environmental issues. Some of the topics include: 1) Aerospace Materials; 2) Building Blocks of Capabilities; 3) Spectroscopic Techniques; 4) Chromatographic Techniques; 5) Factors that Determine Fingerprinting Approach; and 6) Fingerprinting: Combination of instrumental analysis methods that diagnostically characterize a material.

  1. Fissile fingerprints

    Edwards, R.

    1995-01-01

    This article looks at recent research which may allow police and customs officers to detect smuggled weapons-grade plutonium and uranium. Contrary to popular opinion, nuclear materials do not have a nuclear ''fingerprint'' but enough information can be gleaned from sources to confirm what has been learnt from other data. Indeed, two leading nuclear laboratories can look at the same analytical results and draw different conclusions. The case of a lead cylinder seized from a German garage is examined to illustrate the confusion. (UK)

  2. OPTIMAL EXPERIMENT DESIGN FOR MAGNETIC RESONANCE FINGERPRINTING

    Zhao, Bo; Haldar, Justin P.; Setsompop, Kawin; Wald, Lawrence L.

    2016-01-01

    Magnetic resonance (MR) fingerprinting is an emerging quantitative MR imaging technique that simultaneously acquires multiple tissue parameters in an efficient experiment. In this work, we present an estimation-theoretic framework to evaluate and design MR fingerprinting experiments. More specifically, we derive the Cram��r-Rao bound (CRB), a lower bound on the covariance of any unbiased estimator, to characterize parameter estimation for MR fingerprinting. We then formulate an optimal experi...

  3. Fingerprint recognition with identical twin fingerprints.

    Tao, Xunqiang; Chen, Xinjian; Yang, Xin; Tian, Jie

    2012-01-01

    Fingerprint recognition with identical twins is a challenging task due to the closest genetics-based relationship existing in the identical twins. Several pioneers have analyzed the similarity between twins' fingerprints. In this work we continue to investigate the topic of the similarity of identical twin fingerprints. Our study was tested based on a large identical twin fingerprint database that contains 83 twin pairs, 4 fingers per individual and six impressions per finger: 3984 (83*2*4*6) images. Compared to the previous work, our contributions are summarized as follows: (1) Two state-of-the-art fingerprint identification methods: P071 and VeriFinger 6.1 were used, rather than one fingerprint identification method in previous studies. (2) Six impressions per finger were captured, rather than just one impression, which makes the genuine distribution of matching scores more realistic. (3) A larger sample (83 pairs) was collected. (4) A novel statistical analysis, which aims at showing the probability distribution of the fingerprint types for the corresponding fingers of identical twins which have same fingerprint type, has been conducted. (5) A novel analysis, which aims at showing which finger from identical twins has higher probability of having same fingerprint type, has been conducted. Our results showed that: (a) A state-of-the-art automatic fingerprint verification system can distinguish identical twins without drastic degradation in performance. (b) The chance that the fingerprints have the same type from identical twins is 0.7440, comparing to 0.3215 from non-identical twins. (c) For the corresponding fingers of identical twins which have same fingerprint type, the probability distribution of five major fingerprint types is similar to the probability distribution for all the fingers' fingerprint type. (d) For each of four fingers of identical twins, the probability of having same fingerprint type is similar.

  4. Fingerprint recognition with identical twin fingerprints.

    Xunqiang Tao

    Full Text Available Fingerprint recognition with identical twins is a challenging task due to the closest genetics-based relationship existing in the identical twins. Several pioneers have analyzed the similarity between twins' fingerprints. In this work we continue to investigate the topic of the similarity of identical twin fingerprints. Our study was tested based on a large identical twin fingerprint database that contains 83 twin pairs, 4 fingers per individual and six impressions per finger: 3984 (83*2*4*6 images. Compared to the previous work, our contributions are summarized as follows: (1 Two state-of-the-art fingerprint identification methods: P071 and VeriFinger 6.1 were used, rather than one fingerprint identification method in previous studies. (2 Six impressions per finger were captured, rather than just one impression, which makes the genuine distribution of matching scores more realistic. (3 A larger sample (83 pairs was collected. (4 A novel statistical analysis, which aims at showing the probability distribution of the fingerprint types for the corresponding fingers of identical twins which have same fingerprint type, has been conducted. (5 A novel analysis, which aims at showing which finger from identical twins has higher probability of having same fingerprint type, has been conducted. Our results showed that: (a A state-of-the-art automatic fingerprint verification system can distinguish identical twins without drastic degradation in performance. (b The chance that the fingerprints have the same type from identical twins is 0.7440, comparing to 0.3215 from non-identical twins. (c For the corresponding fingers of identical twins which have same fingerprint type, the probability distribution of five major fingerprint types is similar to the probability distribution for all the fingers' fingerprint type. (d For each of four fingers of identical twins, the probability of having same fingerprint type is similar.

  5. Application of UV and X-Ray radiation for refreshing of old latent fingerprints in the cyanoacrylate fuming technique - preliminary study

    Radiceska, Pavlina; Ristova, Mimoza

    2013-01-01

    The work described below focuses on enhancement/refreshment of older latent fingerprints onto a non porous (glass) surface. The aging of the fingerprints is a major problem of the forensic science, because of the compound’s degradation under the influence of a variety of atmospheric parameters, in addition to the time factor. The humidification extent on the latent fingerprints appeared to be one of the critical factors for the deposition of the cyanoacrylate on the finger-marks, since the unsaturated bonds from lipid content from the latent fingerprints serve as active water condensation centers. In the present work we show results from the enhancement of aged latent fingerprint details by activation of the humidity condensation centers with exposition to UV or X-ray radiation prior to their developing into the cyanoacrylate fuming chamber. The aging of the latent fingerprints on glass surfaces with the time for given conditions was established. A term “critical day” was introduced as the day when the detectable details from the latent fingerprints dropped to one half of the initial number of details, recovered from identical fresh latent fingerprint. As the fingerprints were aged to the “critical day”, one third of the samples were exposed to a UV for 15 minutes, another third to 15 minutes of X-ray radiation and the last third was kept unexposed. All the samples were developed into a single cyanoacrylate fuming process. The results showed that in both UV and X-ray cases, a considerable enhancement/refreshment, in approximately 50% of the aged latent fingerprints, has been achieved with only a short term irradiation (15 minutes). (Author)

  6. A fingerprint key binding algorithm based on vector quantization and error correction

    Li, Liang; Wang, Qian; Lv, Ke; He, Ning

    2012-04-01

    In recent years, researches on seamless combination cryptosystem with biometric technologies, e.g. fingerprint recognition, are conducted by many researchers. In this paper, we propose a binding algorithm of fingerprint template and cryptographic key to protect and access the key by fingerprint verification. In order to avoid the intrinsic fuzziness of variant fingerprints, vector quantization and error correction technique are introduced to transform fingerprint template and then bind with key, after a process of fingerprint registration and extracting global ridge pattern of fingerprint. The key itself is secure because only hash value is stored and it is released only when fingerprint verification succeeds. Experimental results demonstrate the effectiveness of our ideas.

  7. Distorted Fingerprint Verification System

    Divya KARTHIKAESHWARAN

    2011-01-01

    Full Text Available Fingerprint verification is one of the most reliable personal identification methods. Fingerprint matching is affected by non-linear distortion introduced in fingerprint impression during the image acquisition process. This non-linear deformation changes both the position and orientation of minutiae. The proposed system operates in three stages: alignment based fingerprint matching, fuzzy clustering and classifier framework. First, an enhanced input fingerprint image has been aligned with the template fingerprint image and matching score is computed. To improve the performance of the system, a fuzzy clustering based on distance and density has been used to cluster the feature set obtained from the fingerprint matcher. Finally a classifier framework has been developed and found that cost sensitive classifier produces better results. The system has been evaluated on fingerprint database and the experimental result shows that system produces a verification rate of 96%. This system plays an important role in forensic and civilian applications.

  8. Fingerprint pores extractor

    Mngenge, NA

    2012-11-01

    Full Text Available , this is not always the case because of diseases and hash working conditions that affect fingerprints. In order to maintain high level of security independent of varying fingerprint image quality research suggests the use of other fingerprint features to compliment...

  9. Collusion-resistant multimedia fingerprinting: a unified framework

    Wu, Min; Trappe, Wade; Wang, Z. Jane; Liu, K. J. Ray

    2004-06-01

    Digital fingerprints are unique labels inserted in different copies of the same content before distribution. Each digital fingerprint is assigned to an inteded recipient, and can be used to trace the culprits who use their content for unintended purposes. Attacks mounted by multiple users, known as collusion attacks, provide a cost-effective method for attenuating the identifying fingerprint from each coluder, thus collusion poses a reeal challenge to protect the digital media data and enforce usage policies. This paper examines a few major design methodologies for collusion-resistant fingerprinting of multimedia, and presents a unified framework that helps highlight the common issues and the uniqueness of different fingerprinting techniques.

  10. Use of novel DNA fingerprinting techniques for the detection and characterization of genetic variation in vegetatively propagated crops. Proceedings of a final research co-ordination meeting

    1998-10-01

    Vegetative propagated crops, such as banana and platain, sweet potato, yam, sugarcane and cassava, represent important sources of food in the developing countries. Although some of these crops may produce seeds, they must for practical purposes be propagated vegetatively. As normal plant breeding strategies based on genetic hybridization are of limited value or not applicable to such crops, it is necessary to assess the genetic diversity already existing in these crops and to design breeding strategies accordingly. If the existing genetic variation is shown to be too narrow for breeding purposes, one promising possibility for the introduction of genetic variability is the use of mutations induced by radiation or chemical mutagens. This CRP focused on: the detection of genetic diversity induced by mutagenic treatment or in vitro culture; the development of crop-specific markers; and increasing co-operation between molecular biologists in advanced laboratories and plant breeders and molecular biologists in the developing countries. The success of this CRP is evidenced by the introduction and application of new molecular methods by laboratories in developing countries, specially for the analysis of local crop genetic diversity. These exciting preliminary results show the potential for applications in crop improvement but much work remains to be done. Many of the vegetatively propagated species are ''orphan crops'', under-investigated on the international level. The development of new uses of transgenesis for the development of edible vaccines should not be overlooked. The challenge that remains is in the application of these new tools for practical end-user oriented improvements in vegetatively propagated crops. The present publication summarizes the third and final Research Co-ordination Meeting on the Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops

  11. Use of novel DNA fingerprinting techniques for the detection and characterization of genetic variation in vegetatively propagated crops. Proceedings of a final research co-ordination meeting

    NONE

    1998-10-01

    Vegetative propagated crops, such as banana and platain, sweet potato, yam, sugarcane and cassava, represent important sources of food in the developing countries. Although some of these crops may produce seeds, they must for practical purposes be propagated vegetatively. As normal plant breeding strategies based on genetic hybridization are of limited value or not applicable to such crops, it is necessary to assess the genetic diversity already existing in these crops and to design breeding strategies accordingly. If the existing genetic variation is shown to be too narrow for breeding purposes, one promising possibility for the introduction of genetic variability is the use of mutations induced by radiation or chemical mutagens. This CRP focused on: the detection of genetic diversity induced by mutagenic treatment or in vitro culture; the development of crop-specific markers; and increasing co-operation between molecular biologists in advanced laboratories and plant breeders and molecular biologists in the developing countries. The success of this CRP is evidenced by the introduction and application of new molecular methods by laboratories in developing countries, specially for the analysis of local crop genetic diversity. These exciting preliminary results show the potential for applications in crop improvement but much work remains to be done. Many of the vegetatively propagated species are ``orphan crops``, under-investigated on the international level. The development of new uses of transgenesis for the development of edible vaccines should not be overlooked. The challenge that remains is in the application of these new tools for practical end-user oriented improvements in vegetatively propagated crops. The present publication summarizes the third and final Research Co-ordination Meeting on the Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops Refs, figs, tabs

  12. Fingerprints in cancer cells

    Servomaa, K.

    1994-01-01

    Gene research has shown that factors causing cancer, or carcinogens, may leave marks typical of each particular carcinogen (fingerprints) in the genotype of the cell. Radiation, for instance, may leave such fingerprints in a cancer cell. In particular, the discovery of a gene called p53 has yielded much new information on fingerprints. It has been discovered, for example, that toxic fungus and UV-radiation each leave fingerprints in the p53 gene. Based on the detection of fingerprints, it may be possible in the future to tell a cancer patient what factor had trigged the maglinancy

  13. Implementation of Minutiae Based Fingerprint Identification System Using Crossing Number Concept

    Atul S. CHAUDHARI

    2014-01-01

    Full Text Available Biometric system is essentially a pattern recognition system which recognizes a person by determining the authenticity of a specific physiological (e.g., fingerprints, face, retina, iris or behavioral (e.g., gait, signature characteristic possessed by that person. Among all the presently employed biometric techniques, fingerprint identification systems have received the most attention due to the long history of fingerprints and its extensive use in forensics. Fingerprint is reliable biometric characteristic as it is unique and persistence. Fingerprint is the pattern of ridges and valleys on the surface of fingertip. However, recognizing fingerprints in poor quality images is still a very complex job, so the fingerprint image must be preprocessed before matching. It is very difficult to extract fingerprint features directly from gray scale fingerprint image. In this paper we have proposed the system which uses minutiae based matching algorithm for fingerprint identification. There are three main phases in proposed algorithm. First phase enhance the input fingerprint image by preprocessing it. The enhanced fingerprint image is converted into thinned binary image and then minutiae are extracted by using Crossing Number Concept in second phase. Third stage compares input fingerprint image (after preprocessing and minutiae extraction with fingerprint images enrolled in database and makes decision whether the input fingerprint is matched with the fingerprint stored in database or not.

  14. The Social Impact of the Offer of Assisted Reproductive Techniques (ART) in a University Hospital in Rio de Janeiro.

    Costa, Tonia; Corrêa, Marilena C D V

    2015-02-01

    The aim of this study is to report the procedures undertaken in the laboratory of semen of a university hospital specialized in human reproduction in Rio de Janeiro, principally Homologous Artificial Insemination (HAI) taking into account a more social aspect. This descriptive and retrospective study was based on documentary research. The source of information included medical records and registers containing the procedures performed in the laboratory of semen and the HAI. Testimonies, questionings and suggestions given by the couples during the process were also registered. The couples were clearly informed about the techniques and many times they externalized their demands, doubts and desires in relation to the procedures, treatment and issues concerning their wish to have children and start a family. The discussion shows concerns over the techniques and theories used in this context when performing procedures in the laboratory of semen. The bond to the service remains based on the idea that "now my dream of having kids will come true". Nevertheless, for the operationalization of the access to ARTs, at the public sector of medicine, we should count on the implementation of the National Politics in Assisted Reproduction. It did not take place and today it has even been removed, no longer being in force. It makes very clear the distance between the "accomplishment of the desire for children" and the reality of the provision of means and resources for ART at the medical public level in Brazil.

  15. Uncover the mantle: rediscovering Gregório Lopes palette and technique with a study on the painting "Mater Misericordiae"

    Antunes, Vanessa; Candeias, António; Oliveira, Maria J.; Carvalho, Maria L.; Dias, Cristina Barrocas; Manhita, Ana; Francisco, Maria J.; Costa, Sónia; Lauw, Alexandra; Manso, Marta

    2016-11-01

    Gregório Lopes (c. 1490-1550) was one of the most prominent painters of the renaissance and Mannerism in Portugal. The painting "Mater Misericordiae" made for the Sesimbra Holy House of Mercy, circa 1535-1538, is one of the most significant works of the artist, and his only painting on this theme, being also one of the most significant Portuguese paintings of sixteenth century. The recent restoration provided the possibility to study materially the painting for the first time, with a multianalytical methodology incorporating portable energy-dispersive X-ray fluorescence spectroscopy, scanning electron microscopy-energy-dispersive spectroscopy, micro-X-ray diffraction, micro-Raman spectroscopy and high-performance liquid chromatography coupled to diode array and mass spectrometry detectors. The analytical study was complemented by infrared reflectography, allowing the study of the underdrawing technique and also by dendrochronology to confirm the date of the wooden panels (1535-1538). The results of this study were compared with previous ones on the painter's workshop, and significant differences and similitudes were found in the materials and techniques used.

  16. Optimal experiment design for magnetic resonance fingerprinting.

    Bo Zhao; Haldar, Justin P; Setsompop, Kawin; Wald, Lawrence L

    2016-08-01

    Magnetic resonance (MR) fingerprinting is an emerging quantitative MR imaging technique that simultaneously acquires multiple tissue parameters in an efficient experiment. In this work, we present an estimation-theoretic framework to evaluate and design MR fingerprinting experiments. More specifically, we derive the Cramér-Rao bound (CRB), a lower bound on the covariance of any unbiased estimator, to characterize parameter estimation for MR fingerprinting. We then formulate an optimal experiment design problem based on the CRB to choose a set of acquisition parameters (e.g., flip angles and/or repetition times) that maximizes the signal-to-noise ratio efficiency of the resulting experiment. The utility of the proposed approach is validated by numerical studies. Representative results demonstrate that the optimized experiments allow for substantial reduction in the length of an MR fingerprinting acquisition, and substantial improvement in parameter estimation performance.

  17. Hyperbolic Location Fingerprinting: A Calibration-Free Solution for Handling Differences in Signal Strength

    Kjærgaard, Mikkel Baun; Munk, Carsten Valdemar

    2008-01-01

    records fingerprints as signal-strength ratios between pairs of base stations instead of absolute signal-strength values. The proposed solution has been evaluated by extending two well-known location fingerprinting techniques to hyperbolic location fingerprinting. The extended techniques have been tested...

  18. An Efficient Reconfigurable Architecture for Fingerprint Recognition

    Satish S. Bhairannawar

    2016-01-01

    Full Text Available The fingerprint identification is an efficient biometric technique to authenticate human beings in real-time Big Data Analytics. In this paper, we propose an efficient Finite State Machine (FSM based reconfigurable architecture for fingerprint recognition. The fingerprint image is resized, and Compound Linear Binary Pattern (CLBP is applied on fingerprint, followed by histogram to obtain histogram CLBP features. Discrete Wavelet Transform (DWT Level 2 features are obtained by the same methodology. The novel matching score of CLBP is computed using histogram CLBP features of test image and fingerprint images in the database. Similarly, the DWT matching score is computed using DWT features of test image and fingerprint images in the database. Further, the matching scores of CLBP and DWT are fused with arithmetic equation using improvement factor. The performance parameters such as TSR (Total Success Rate, FAR (False Acceptance Rate, and FRR (False Rejection Rate are computed using fusion scores with correlation matching technique for FVC2004 DB3 Database. The proposed fusion based VLSI architecture is synthesized on Virtex xc5vlx30T-3 FPGA board using Finite State Machine resulting in optimized parameters.

  19. Fingerprint classification using a simplified rule-set based on directional patterns and singularity features

    Dorasamy, K

    2015-07-01

    Full Text Available The use of directional patterns has recently received more attention in fingerprint classification. It provides a global representation of a fingerprint, by dividing it into homogeneous orientation partitions. With this technique, the challenge...

  20. Aspects of physicochemical methods for the detection of latent fingerprints

    Knowles, A.M.

    1978-01-01

    This paper reviews physicochemical methods of detecting latent finger-prints on a wide range of materials commonly found at the scene of a crime, with particular emphasis placed on the newer autoradiographic techniques. This is set against a description of studies on the fundamental nature of the latent fingerprint and its host substrate, with a brief review of the history of reagents used in latent fingerprint examination. (author)

  1. Photogrammetric fingerprint unwrapping

    Paar, Gerhard; del Pilar Caballo Perucha, Maria; Bauer, Arnold; Nauschnegg, Bernhard

    2008-04-01

    Fingerprints are important biometric cues. Compared to conventional fingerprint sensors the use of contact-free stereoscopic image acquisition of the front-most finger segment has a set of advantages: Finger deformation is avoided, the entire relevant area for biometric use is covered, some technical aspects like sensor maintenance and cleaning are facilitated, and access to a three-dimensional reconstruction of the covered area is possible. We describe a photogrammetric workflow for nail-to-nail fingerprint reconstruction: A calibrated sensor setup with typically 5 cameras and dedicated illumination acquires adjacent stereo pairs. Using the silhouettes of the segmented finger a raw cylindrical model is generated. After preprocessing (shading correction, dust removal, lens distortion correction), each individual camera texture is projected onto the model. Image-to-image matching on these pseudo ortho images and dense 3D reconstruction obtains a textured cylindrical digital surface model with radial distances around the major axis and a grid size in the range of 25-50 µm. The model allows for objective fingerprint unwrapping and novel fingerprint matching algorithms since 3D relations between fingerprint features are available as additional cues. Moreover, covering the entire region with relevant fingerprint texture is particularly important for establishing a comprehensive forensic database. The workflow has been implemented in portable C and is ready for industrial exploitation. Further improvement issues are code optimization, unwrapping method, illumination strategy to avoid highlights and to improve the initial segmentation, and the comparison of the unwrapping result to conventional fingerprint acquisition technology.

  2. Graphene Nanopres for DNA Fingerprinting

    Ahmed, Towfiq; Balatsky, Alexander V.; Haraldsen, J. T.; Schuller, Ivan K.; di Ventra, M.; Wikfeldt, K. T.

    2013-03-01

    The recent progress in nanopore experiments with transverse current is important for the development of fast, accurate and cheap finger-printing techniques for single nucleotide. Despite its enormous potential for the next generation DNA sequencing technology, the presence of large noise in the temporal spectrum of transverse current remains a big challenge for getting highly accurate interpretation of data. In this paper we present our abinitio calculations, and propose graphene based device for DNA fingerprinting. We calculate transmission current through graphene for each DNA base (A,C,G,T). As shown in our work, a proper time-series analysis of a signal provides a higher quality information in identifying single bio-molecule is translocating through the nanopores. This work is supported by LANL, Nordita, US DOE, AFOSR, and NIH.

  3. Magnetic resonance fingerprinting.

    Ma, Dan; Gulani, Vikas; Seiberlich, Nicole; Liu, Kecheng; Sunshine, Jeffrey L; Duerk, Jeffrey L; Griswold, Mark A

    2013-03-14

    Magnetic resonance is an exceptionally powerful and versatile measurement technique. The basic structure of a magnetic resonance experiment has remained largely unchanged for almost 50 years, being mainly restricted to the qualitative probing of only a limited set of the properties that can in principle be accessed by this technique. Here we introduce an approach to data acquisition, post-processing and visualization--which we term 'magnetic resonance fingerprinting' (MRF)--that permits the simultaneous non-invasive quantification of multiple important properties of a material or tissue. MRF thus provides an alternative way to quantitatively detect and analyse complex changes that can represent physical alterations of a substance or early indicators of disease. MRF can also be used to identify the presence of a specific target material or tissue, which will increase the sensitivity, specificity and speed of a magnetic resonance study, and potentially lead to new diagnostic testing methodologies. When paired with an appropriate pattern-recognition algorithm, MRF inherently suppresses measurement errors and can thus improve measurement accuracy.

  4. Fingerprint Sensors: Liveness Detection Issue and Hardware based Solutions

    Shahzad Memon

    2012-01-01

    Full Text Available Securing an automated and unsupervised fingerprint recognition system is one of the most critical and challenging tasks in government and commercial applications. In these systems, the detection of liveness of a finger placed on a fingerprint sensor is a major issue that needs to be addressed in order to ensure the credibility of the system. The main focus of this paper is to review the existing fingerprint sensing technologies in terms of liveness detection and discusses hardware based ‘liveness detection’ techniques reported in the literature for automatic fingerprint biometrics.

  5. Enhancing security of fingerprints through contextual biometric watermarking.

    Noore, Afzel; Singh, Richa; Vatsa, Mayank; Houck, Max M

    2007-07-04

    This paper presents a novel digital watermarking technique using face and demographic text data as multiple watermarks for verifying the chain of custody and protecting the integrity of a fingerprint image. The watermarks are embedded in selected texture regions of a fingerprint image using discrete wavelet transform. Experimental results show that modifications in these locations are visually imperceptible and maintain the minutiae details. The integrity of the fingerprint image is verified through the high matching scores obtained from an automatic fingerprint identification system. There is also a high degree of visual correlation between the embedded images, and the extracted images from the watermarked fingerprint. The degree of similarity is computed using pixel-based metrics and human visual system metrics. The results also show that the proposed watermarked fingerprint and the extracted images are resilient to common attacks such as compression, filtering, and noise.

  6. Advances in fingerprint analysis.

    Hazarika, Pompi; Russell, David A

    2012-04-10

    Fingerprints have been used in forensic investigations for the identification of individuals since the late 19th century. However, it is now clear that fingerprints can provide significantly more information about an individual. Here, we highlight the considerable advances in fingerprinting technology that can simultaneously provide chemical information regarding the drugs ingested and the explosives and drugs handled by a person as well as the identity of that individual. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Fingerprint extraction from interference destruction terahertz spectrum.

    Xiong, Wei; Shen, Jingling

    2010-10-11

    In this paper, periodic peaks in a terahertz absorption spectrum are confirmed to be induced from interference effects. Theoretically, we explained the periodic peaks and calculated the locations of them. Accordingly, a technique was suggested, with which the interference peaks in a terahertz spectrum can be eliminated and therefore a real terahertz absorption spectrum can be obtained. Experimentally, a sample, Methamphetamine, was investigated and its terahertz fingerprint was successfully extracted from its interference destruction spectrum. This technique is useful in getting samples' terahertz fingerprint spectra, and furthermore provides a fast nondestructive testing method using a large size terahertz beam to identify materials.

  8. Rapid discrimination and classification of the Lactobacillus plantarum group based on a partial dnaK sequence and DNA fingerprinting techniques.

    Huang, Chien-Hsun; Lee, Fwu-Ling; Liou, Jong-Shian

    2010-03-01

    The Lactobacillus plantarum group comprises five very closely related species. Some species of this group are considered to be probiotic and widely applied in the food industry. In this study, we compared the use of two different molecular markers, the 16S rRNA and dnaK gene, for discriminating phylogenetic relationships amongst L. plantarum strains using sequencing and DNA fingerprinting. The average sequence similarity for the dnaK gene (89.2%) among five type strains was significantly less than that for the 16S rRNA (99.4%). This result demonstrates that the dnaK gene sequence provided higher resolution than the 16S rRNA and suggests that the dnaK could be used as an additional phylogenetic marker for L. plantarum. Species-specific profiles of the Lactobacillus strains were obtained with RAPD and RFLP methods. Our data indicate that phylogenetic relationships between these strains are easily resolved using sequencing of the dnaK gene or DNA fingerprinting assays.

  9. Longitudinal study of fingerprint recognition.

    Yoon, Soweon; Jain, Anil K

    2015-07-14

    Human identification by fingerprints is based on the fundamental premise that ridge patterns from distinct fingers are different (uniqueness) and a fingerprint pattern does not change over time (persistence). Although the uniqueness of fingerprints has been investigated by developing statistical models to estimate the probability of error in comparing two random samples of fingerprints, the persistence of fingerprints has remained a general belief based on only a few case studies. In this study, fingerprint match (similarity) scores are analyzed by multilevel statistical models with covariates such as time interval between two fingerprints in comparison, subject's age, and fingerprint image quality. Longitudinal fingerprint records of 15,597 subjects are sampled from an operational fingerprint database such that each individual has at least five 10-print records over a minimum time span of 5 y. In regard to the persistence of fingerprints, the longitudinal analysis on a single (right index) finger demonstrates that (i) genuine match scores tend to significantly decrease when time interval between two fingerprints in comparison increases, whereas the change in impostor match scores is negligible; and (ii) fingerprint recognition accuracy at operational settings, nevertheless, tends to be stable as the time interval increases up to 12 y, the maximum time span in the dataset. However, the uncertainty of temporal stability of fingerprint recognition accuracy becomes substantially large if either of the two fingerprints being compared is of poor quality. The conclusions drawn from 10-finger fusion analysis coincide with the conclusions from single-finger analysis.

  10. Online fingerprint verification.

    Upendra, K; Singh, S; Kumar, V; Verma, H K

    2007-01-01

    As organizations search for more secure authentication methods for user access, e-commerce, and other security applications, biometrics is gaining increasing attention. With an increasing emphasis on the emerging automatic personal identification applications, fingerprint based identification is becoming more popular. The most widely used fingerprint representation is the minutiae based representation. The main drawback with this representation is that it does not utilize a significant component of the rich discriminatory information available in the fingerprints. Local ridge structures cannot be completely characterized by minutiae. Also, it is difficult quickly to match two fingerprint images containing different number of unregistered minutiae points. In this study filter bank based representation, which eliminates these weakness, is implemented and the overall performance of the developed system is tested. The results have shown that this system can be used effectively for secure online verification applications.

  11. Making DNA Fingerprints.

    Nunley, Kathie F.

    1996-01-01

    Presents an activity to simulate electrophoresis using everyday items. Uses adding machine paper to construct a set of DNA fingerprints that can be used to solve crime cases designed by students in any biology class. (JRH)

  12. On Realistically Attacking Tor with Website Fingerprinting

    Wang Tao

    2016-10-01

    Full Text Available Website fingerprinting allows a local, passive observer monitoring a web-browsing client’s encrypted channel to determine her web activity. Previous attacks have shown that website fingerprinting could be a threat to anonymity networks such as Tor under laboratory conditions. However, there are significant differences between laboratory conditions and realistic conditions. First, in laboratory tests we collect the training data set together with the testing data set, so the training data set is fresh, but an attacker may not be able to maintain a fresh data set. Second, laboratory packet sequences correspond to a single page each, but for realistic packet sequences the split between pages is not obvious. Third, packet sequences may include background noise from other types of web traffic. These differences adversely affect website fingerprinting under realistic conditions. In this paper, we tackle these three problems to bridge the gap between laboratory and realistic conditions for website fingerprinting. We show that we can maintain a fresh training set with minimal resources. We demonstrate several classification-based techniques that allow us to split full packet sequences effectively into sequences corresponding to a single page each. We describe several new algorithms for tackling background noise. With our techniques, we are able to build the first website fingerprinting system that can operate directly on packet sequences collected in the wild.

  13. DNA fingerprinting in botany: past, present, future.

    Nybom, Hilde; Weising, Kurt; Rotter, Björn

    2014-01-03

    Almost three decades ago Alec Jeffreys published his seminal Nature papers on the use of minisatellite probes for DNA fingerprinting of humans (Jeffreys and colleagues Nature 1985, 314:67-73 and Nature 1985, 316:76-79). The new technology was soon adopted for many other organisms including plants, and when Hilde Nybom, Kurt Weising and Alec Jeffreys first met at the very First International Conference on DNA Fingerprinting in Berne, Switzerland, in 1990, everybody was enthusiastic about the novel method that allowed us for the first time to discriminate between humans, animals, plants and fungi on the individual level using DNA markers. A newsletter coined "Fingerprint News" was launched, T-shirts were sold, and the proceedings of the Berne conference filled a first book on "DNA fingerprinting: approaches and applications". Four more conferences were about to follow, one on each continent, and Alec Jeffreys of course was invited to all of them. Since these early days, methodologies have undergone a rapid evolution and diversification. A multitude of techniques have been developed, optimized, and eventually abandoned when novel and more efficient and/or more reliable methods appeared. Despite some overlap between the lifetimes of the different technologies, three phases can be defined that coincide with major technological advances. Whereas the first phase of DNA fingerprinting ("the past") was dominated by restriction fragment analysis in conjunction with Southern blot hybridization, the advent of the PCR in the late 1980s gave way to the development of PCR-based single- or multi-locus profiling techniques in the second phase. Given that many routine applications of plant DNA fingerprinting still rely on PCR-based markers, we here refer to these methods as "DNA fingerprinting in the present", and include numerous examples in the present review. The beginning of the third phase actually dates back to 2005, when several novel, highly parallel DNA sequencing

  14. A Taxonomy for Radio Location Fingerprinting

    Kjærgaard, Mikkel Baun

    2007-01-01

    Location Fingerprinting (LF) is a promising location technique for many awareness applications in pervasive computing. However, as research on LF systems goes beyond basic methods there is an increasing need for better comparison of proposed LF systems. Developers of LF systems are also lacking...

  15. Peptide Mass Fingerprinting of Egg White Proteins

    Alty, Lisa T.; LaRiviere, Frederick J.

    2016-01-01

    Use of advanced mass spectrometry techniques in the undergraduate setting has burgeoned in the past decade. However, relatively few undergraduate experiments examine the proteomics tools of protein digestion, peptide accurate mass determination, and database searching, also known as peptide mass fingerprinting. In this experiment, biochemistry…

  16. Security and matching of partial fingerprint recognition systems

    Jea, Tsai-Yang; Chavan, Viraj S.; Govindaraju, Venu; Schneider, John K.

    2004-08-01

    Despite advances in fingerprint identification techniques, matching incomplete or partial fingerprints still poses a difficult challenge. While the introduction of compact silicon chip-based sensors that capture only a part of the fingerprint area have made this problem important from a commercial perspective, there is also considerable interest on the topic for processing partial and latent fingerprints obtained at crime scenes. Attempts to match partial fingerprints using singular ridge structures-based alignment techniques fail when the partial print does not include such structures (e.g., core or delta). We present a multi-path fingerprint matching approach that utilizes localized secondary features derived using only the relative information of minutiae. Since the minutia-based fingerprint representation, is an ANSI-NIST standard, our approach has the advantage of being directly applicable to already existing databases. We also analyze the vulnerability of partial fingerprint identification systems to brute force attacks. The described matching approach has been tested on one of FVC2002"s DB1 database11. The experimental results show that our approach achieves an equal error rate of 1.25% and a total error rate of 1.8% (with FAR at 0.2% and FRR at 1.6%).

  17. Fingerprint image enhancement by differential hysteresis processing.

    Blotta, Eduardo; Moler, Emilce

    2004-05-10

    A new method to enhance defective fingerprints images through image digital processing tools is presented in this work. When the fingerprints have been taken without any care, blurred and in some cases mostly illegible, as in the case presented here, their classification and comparison becomes nearly impossible. A combination of spatial domain filters, including a technique called differential hysteresis processing (DHP), is applied to improve these kind of images. This set of filtering methods proved to be satisfactory in a wide range of cases by uncovering hidden details that helped to identify persons. Dactyloscopy experts from Policia Federal Argentina and the EAAF have validated these results.

  18. Fingerprints in Compressed Strings

    Bille, Philip; Cording, Patrick Hagge; Gørtz, Inge Li

    2013-01-01

    The Karp-Rabin fingerprint of a string is a type of hash value that due to its strong properties has been used in many string algorithms. In this paper we show how to construct a data structure for a string S of size N compressed by a context-free grammar of size n that answers fingerprint queries...... derivative that captures LZ78 compression and its variations) we get O(loglogN) query time. Hence, our data structures has the same time and space complexity as for random access in SLPs. We utilize the fingerprint data structures to solve the longest common extension problem in query time O(logNlogℓ) and O....... That is, given indices i and j, the answer to a query is the fingerprint of the substring S[i,j]. We present the first O(n) space data structures that answer fingerprint queries without decompressing any characters. For Straight Line Programs (SLP) we get O(logN) query time, and for Linear SLPs (an SLP...

  19. Dealing with Insufficient Location Fingerprints in Wi-Fi Based Indoor Location Fingerprinting

    Kai Dong

    2017-01-01

    Full Text Available The development of the Internet of Things has accelerated research in the indoor location fingerprinting technique, which provides value-added localization services for existing WLAN infrastructures without the need for any specialized hardware. The deployment of a fingerprinting based localization system requires an extremely large amount of measurements on received signal strength information to generate a location fingerprint database. Nonetheless, this requirement can rarely be satisfied in most indoor environments. In this paper, we target one but common situation when the collected measurements on received signal strength information are insufficient, and show limitations of existing location fingerprinting methods in dealing with inadequate location fingerprints. We also introduce a novel method to reduce noise in measuring the received signal strength based on the maximum likelihood estimation, and compute locations from inadequate location fingerprints by using the stochastic gradient descent algorithm. Our experiment results show that our proposed method can achieve better localization performance even when only a small quantity of RSS measurements is available. Especially when the number of observations at each location is small, our proposed method has evident superiority in localization accuracy.

  20. An Introduction to DNA Fingerprinting.

    Hepfer, Carol Ely; And Others

    1993-01-01

    Provides background information on DNA fingerprinting, and describes exercises for introducing general biology students at the high school or college level to the methodology and applications of DNA fingerprinting. (PR)

  1. Fingerprinting with Wow

    Yu, Eugene; Craver, Scott

    2006-02-01

    Wow, or time warping caused by speed fluctuations in analog audio equipment, provides a wealth of applications in watermarking. Very subtle temporal distortion has been used to defeat watermarks, and as components in watermarking systems. In the image domain, the analogous warping of an image's canvas has been used both to defeat watermarks and also proposed to prevent collusion attacks on fingerprinting systems. In this paper, we explore how subliminal levels of wow can be used for steganography and fingerprinting. We present both a low-bitrate robust solution and a higher-bitrate solution intended for steganographic communication. As already observed, such a fingerprinting algorithm naturally discourages collusion by averaging, owing to flanging effects when misaligned audio is averaged. Another advantage of warping is that even when imperceptible, it can be beyond the reach of compression algorithms. We use this opportunity to debunk the common misconception that steganography is impossible under "perfect compression."

  2. Fingerprints in compressed strings

    Bille, Philip; Gørtz, Inge Li; Cording, Patrick Hagge

    2017-01-01

    In this paper we show how to construct a data structure for a string S of size N compressed into a context-free grammar of size n that supports efficient Karp–Rabin fingerprint queries to any substring of S. That is, given indices i and j, the answer to a query is the fingerprint of the substring S......[i,j]. We present the first O(n) space data structures that answer fingerprint queries without decompressing any characters. For Straight Line Programs (SLP) we get O(log⁡N) query time, and for Linear SLPs (an SLP derivative that captures LZ78 compression and its variations) we get O(log⁡log⁡N) query time...

  3. Fingerprint recognition system by use of graph matching

    Shen, Wei; Shen, Jun; Zheng, Huicheng

    2001-09-01

    Fingerprint recognition is an important subject in biometrics to identify or verify persons by physiological characteristics, and has found wide applications in different domains. In the present paper, we present a finger recognition system that combines singular points and structures. The principal steps of processing in our system are: preprocessing and ridge segmentation, singular point extraction and selection, graph representation, and finger recognition by graphs matching. Our fingerprint recognition system is implemented and tested for many fingerprint images and the experimental result are satisfactory. Different techniques are used in our system, such as fast calculation of orientation field, local fuzzy dynamical thresholding, algebraic analysis of connections and fingerprints representation and matching by graphs. Wed find that for fingerprint database that is not very large, the recognition rate is very high even without using a prior coarse category classification. This system works well for both one-to-few and one-to-many problems.

  4. Partial Device Fingerprints

    Ciere, M.; Hernandez Ganan, C.; van Eeten, M.J.G.

    2017-01-01

    In computing, remote devices may be identified by means of device fingerprinting, which works by collecting a myriad of clientside attributes such as the device’s browser and operating system version, installed plugins, screen resolution, hardware artifacts, Wi-Fi settings, and anything else

  5. Defense of fake fingerprint attacks using a swept source laser optical coherence tomography setup

    Meissner, Sven; Breithaupt, Ralph; Koch, Edmund

    2013-03-01

    The most established technique for the identification at biometric access control systems is the human fingerprint. While every human fingerprint is unique, fingerprints can be faked very easily by using thin layer fakes. Because commercial fingerprint scanners use only a two-dimensional image acquisition of the finger surface, they can only hardly differentiate between real fingerprints and fingerprint fakes applied on thin layer materials. A Swept Source OCT system with an A-line rate of 20 kHz and a lateral and axial resolution of approximately 13 μm, a centre wavelength of 1320 nm and a band width of 120 nm (FWHM) was used to acquire fingerprints and finger tips with overlying fakes. Three-dimensional volume stacks with dimensions of 4.5 mm x 4 mm x 2 mm were acquired. The layering arrangement of the imaged finger tips and faked finger tips was analyzed and subsequently classified into real and faked fingerprints. Additionally, sweat gland ducts were detected and consulted for the classification. The manual classification between real fingerprints and faked fingerprints results in almost 100 % correctness. The outer as well as the internal fingerprint can be recognized in all real human fingers, whereby this was not possible in the image stacks of the faked fingerprints. Furthermore, in all image stacks of real human fingers the sweat gland ducts were detected. The number of sweat gland ducts differs between the test persons. The typical helix shape of the ducts was observed. In contrast, in images of faked fingerprints we observe abnormal layer arrangements and no sweat gland ducts connecting the papillae of the outer fingerprint and the internal fingerprint. We demonstrated that OCT is a very useful tool to enhance the performance of biometric control systems concerning attacks by thin layer fingerprint fakes.

  6. DNA fingerprints come to court

    Anon.

    1988-01-01

    DNA fingerprinting, a new technique, which produces a visual representation of a person's genome, enables the identification of perpetrators from as little as a single hair root, providing they have left some biologic evidence-hair, skin cells, blood, or semen-at the scene of the crime. DNA fingerprinting was developed by British geneticist Alec Jeffreys, PhD, in 1985. Jeffreys, professor genetics at the University of Leicester, built upon a discovery, five years earlier, of certain hypervariable regions called minisatellites in unexpressed areas of DNA. The hypervariability was evidenced in the number of repetitions of certain sequences of base pairs. It was this aspect that revealed to Jeffreys something that had eluded other investigators. He realized that these minisatellite regions had a potential for identification far greater than that of conventional genetic markers, which are defined by restriction fragment length polymorphisms (RFLPs). RFLPs are characterized by the substitution of one base pair for another, resulting in the presence or absence of a restriction enzyme site. Thus, each offers a limited number of alleles. In contrast, minisatellite regions have an accordion-like range of length, as the number of repetitions of a given sequence varies widely from person to person

  7. Fast probabilistic file fingerprinting for big data.

    Tretyakov, Konstantin; Laur, Sven; Smant, Geert; Vilo, Jaak; Prins, Pjotr

    2013-01-01

    Biological data acquisition is raising new challenges, both in data analysis and handling. Not only is it proving hard to analyze the data at the rate it is generated today, but simply reading and transferring data files can be prohibitively slow due to their size. This primarily concerns logistics within and between data centers, but is also important for workstation users in the analysis phase. Common usage patterns, such as comparing and transferring files, are proving computationally expensive and are tying down shared resources. We present an efficient method for calculating file uniqueness for large scientific data files, that takes less computational effort than existing techniques. This method, called Probabilistic Fast File Fingerprinting (PFFF), exploits the variation present in biological data and computes file fingerprints by sampling randomly from the file instead of reading it in full. Consequently, it has a flat performance characteristic, correlated with data variation rather than file size. We demonstrate that probabilistic fingerprinting can be as reliable as existing hashing techniques, with provably negligible risk of collisions. We measure the performance of the algorithm on a number of data storage and access technologies, identifying its strengths as well as limitations. Probabilistic fingerprinting may significantly reduce the use of computational resources when comparing very large files. Utilisation of probabilistic fingerprinting techniques can increase the speed of common file-related workflows, both in the data center and for workbench analysis. The implementation of the algorithm is available as an open-source tool named pfff, as a command-line tool as well as a C library. The tool can be downloaded from http://biit.cs.ut.ee/pfff.

  8. A Karnaugh-Map based fingerprint minutiae extraction method

    Sunil Kumar Singla

    2010-07-01

    Full Text Available Fingerprint is one of the most promising method among all the biometric techniques and has been used for thepersonal authentication for a long time because of its wide acceptance and reliability. Features (Minutiae are extracted fromthe fingerprint in question and are compared with the features already stored in the database for authentication. Crossingnumber (CN is the most commonly used minutiae extraction method for fingerprints. In this paper, a new Karnaugh-Mapbased fingerprint minutiae extraction method has been proposed and discussed. In the proposed algorithm the 8 neighborsof a pixel in a 33 window are arranged as 8 bits of a byte and corresponding hexadecimal (hex value is calculated. Thesehex values are simplified using standard Karnaugh-Map (K-map technique to obtain the minimized logical expression.Experiments conducted on the FVC2002/Db1_a database reveals that the developed method is better than the crossingnumber (CN method.

  9. Artificial fingerprint recognition by using optical coherence tomography with autocorrelation analysis

    Cheng, Yezeng; Larin, Kirill V.

    2006-12-01

    Fingerprint recognition is one of the most widely used methods of biometrics. This method relies on the surface topography of a finger and, thus, is potentially vulnerable for spoofing by artificial dummies with embedded fingerprints. In this study, we applied the optical coherence tomography (OCT) technique to distinguish artificial materials commonly used for spoofing fingerprint scanning systems from the real skin. Several artificial fingerprint dummies made from household cement and liquid silicone rubber were prepared and tested using a commercial fingerprint reader and an OCT system. While the artificial fingerprints easily spoofed the commercial fingerprint reader, OCT images revealed the presence of them at all times. We also demonstrated that an autocorrelation analysis of the OCT images could be potentially used in automatic recognition systems.

  10. 3D fingerprint imaging system based on full-field fringe projection profilometry

    Huang, Shujun; Zhang, Zonghua; Zhao, Yan; Dai, Jie; Chen, Chao; Xu, Yongjia; Zhang, E.; Xie, Lili

    2014-01-01

    As an unique, unchangeable and easily acquired biometrics, fingerprint has been widely studied in academics and applied in many fields over the years. The traditional fingerprint recognition methods are based on the obtained 2D feature of fingerprint. However, fingerprint is a 3D biological characteristic. The mapping from 3D to 2D loses 1D information and causes nonlinear distortion of the captured fingerprint. Therefore, it is becoming more and more important to obtain 3D fingerprint information for recognition. In this paper, a novel 3D fingerprint imaging system is presented based on fringe projection technique to obtain 3D features and the corresponding color texture information. A series of color sinusoidal fringe patterns with optimum three-fringe numbers are projected onto a finger surface. From another viewpoint, the fringe patterns are deformed by the finger surface and captured by a CCD camera. 3D shape data of the finger can be obtained from the captured fringe pattern images. This paper studies the prototype of the 3D fingerprint imaging system, including principle of 3D fingerprint acquisition, hardware design of the 3D imaging system, 3D calibration of the system, and software development. Some experiments are carried out by acquiring several 3D fingerprint data. The experimental results demonstrate the feasibility of the proposed 3D fingerprint imaging system.

  11. Using Py-GC/MS to fingerprint additives associated with paper mill effluent toxicity episodes

    Sithole, Bruce

    2012-10-01

    Full Text Available techniques applicable to mill effluents such as gas chromatography. Py-GC/MS is a powerful analytical technique that can be used to fingerprint these additives. The presence of the additives is confirmed by fingerprint pyrograms of the additives (or...

  12. Classical and quantum fingerprinting strategies

    Scott, A.; Walgate, J.; Sanders, B.

    2005-01-01

    Full text: Fingerprinting enables two parties to infer whether the messages they hold are the same or different when the cost of communication is high: each message is associated with a smaller fingerprint and comparisons between messages are made in terms of their fingerprints alone. When the two parties are forbidden access to a public coin, it is known that fingerprints composed of quantum information can be made exponentially smaller than those composed of classical information. We present specific constructions of classical fingerprinting strategies through the use of constant-weight codes and provide bounds on the worst-case error probability with the help of extremal set theory. These classical strategies are easily outperformed by quantum strategies constructed from line packings and equiangular tight frames. (author)

  13. Use of Isotopic Techniques for the Assessment of Hydrological Interaction Surface Water and Groundwater. Rio Man - Cienaga Colombia

    Palacio B, P.; Betancur V, T.; Dapena, C.

    2011-01-01

    This job integrates the first results from the studies ''Conceptual Hydrological Model for the middle and lower parts of the Man River basin using hydrological, hydrochemical and isotopic techniques'' (Palacio, 2011) and ''Hydrochemical and Isotopic techniques for the assessment of hydrological processes in the the wetlands of Bajo Cauca Antioquia'' (University of Antioquia and International Atomic Energy Agency (IAEA). The Man river basin covers an area of 688 km 2 ; with temperatures ranging from 25 to 30 o C; The average annual rainfall is 2.800 mm. The geology of the area is composed mainly of clastic sedimentary rocks of continental origin. A hydrological model of interaction between surface water and groundwater for the lower middle of the Man River basin was obtained by the use of hydrological analysis techniques. This model was refined, adjusted and validated using isotope techniques based mainly on the analysis of spatial and temporal variance of stable isotopes found in rain water, surface bodies of water such as streams and wetlands, and in an unconfined aquifer.

  14. Straightforward fabrication of black nano silica dusting powder for latent fingerprint imaging

    Komalasari, Isna; Krismastuti, Fransiska Sri Herwahyu; Elishian, Christine; Handayani, Eka Mardika; Nugraha, Willy Cahya; Ketrin, Rosi

    2017-11-01

    Imaging of latent fingerprint pattern (aka fingermark) is one of the most important and accurate detection methods in forensic investigation because of the characteristic of individual fingerprint. This detection technique relies on the mechanical adherence of fingerprint powder to the moisture and oily component of the skin left on the surface. The particle size of fingerprint powder is one of the critical parameter to obtain excellent fingerprint image. This study develops a simple, cheap and straightforward method to fabricate Nano size black dusting fingerprint powder based on Nano silica and applies the powder to visualize latent fingerprint. The nanostructured silica was prepared from tetraethoxysilane (TEOS) and then modified with Nano carbon, methylene blue and sodium acetate to color the powder. Finally, as a proof-of-principle, the ability of this black Nano silica dusting powder to image latent fingerprint is successfully demonstrated and the results show that this fingerprint powder provides clearer fingerprint pattern compared to the commercial one highlighting the potential application of the nanostructured silica in forensic science.

  15. Towards reconstruction of overlapping fingerprints using plasma spectroscopy

    Yang, Jun-Ho; Choi, Soo-Jin; Yoh, Jack J.

    2017-08-01

    Chemical analysis is commonly used in the field of forensic science where the precise discrimination of primary evidence is of significant importance. Laser-Induced Breakdown Spectroscopy (LIBS) exceeds other spectroscopic methods in terms of the time required for pre- and post-sample preparation, the insensitivity to sample phase state be it solid, liquid, or gas, and the detection of two-dimensional spectral mapping from real time point measurements. In this research, fingerprint samples on various surface materials are considered in the chemical detection and reconstruction of fingerprints using the two-dimensional LIBS technique. Strong and distinct intensities of specific wavelengths represent visible ink, natural secretion of sweat, and contaminants from the environment, all of which can be present in latent fingerprints. The particular aim of the work presented here is to enhance the precision of the two-dimensional recreation of the fingerprints present on metal, plastic, and artificially prepared soil surface using LIBS with principal component analysis. By applying a distinct wavelength discrimination for two overlapping fingerprint samples, separation into two non-identical chemical fingerprints was successfully performed.

  16. Evaluation of fingerprint deformation using optical coherence tomography

    Gutierrez da Costa, Henrique S.; Maxey, Jessica R.; Silva, Luciano; Ellerbee, Audrey K.

    2014-02-01

    Biometric identification systems have important applications to privacy and security. The most widely used of these, print identification, is based on imaging patterns present in the fingers, hands and feet that are formed by the ridges, valleys and pores of the skin. Most modern print sensors acquire images of the finger when pressed against a sensor surface. Unfortunately, this pressure may result in deformations, characterized by changes in the sizes and relative distances of the print patterns, and such changes have been shown to negatively affect the performance of fingerprint identification algorithms. Optical coherence tomography (OCT) is a novel imaging technique that is capable of imaging the subsurface of biological tissue. Hence, OCT may be used to obtain images of subdermal skin structures from which one can extract an internal fingerprint. The internal fingerprint is very similar in structure to the commonly used external fingerprint and is of increasing interest in investigations of identify fraud. We proposed and tested metrics based on measurements calculated from external and internal fingerprints to evaluate the amount of deformation of the skin. Such metrics were used to test hypotheses about the differences of deformation between the internal and external images, variations with the type of finger and location inside the fingerprint.

  17. Practical Fingerprinting Localization for Indoor Positioning System by Using Beacons

    Santosh Subedi

    2017-01-01

    Full Text Available Recent developments in the fields of smartphones and wireless communication technologies such as beacons, Wi-Fi, and ultra-wideband have made it possible to realize indoor positioning system (IPS with a few meters of accuracy. In this paper, an improvement over traditional fingerprinting localization is proposed by combining it with weighted centroid localization (WCL. The proposed localization method reduces the total number of fingerprint reference points over the localization space, thus minimizing both the time required for reading radio frequency signals and the number of reference points needed during the fingerprinting learning process, which eventually makes the process less time-consuming. The proposed positioning has two major steps of operation. In the first step, we have realized fingerprinting that utilizes lightly populated reference points (RPs and WCL individually. Using the location estimated at the first step, WCL is run again for the final location estimation. The proposed localization technique reduces the number of required fingerprint RPs by more than 40% compared to normal fingerprinting localization method with a similar localization estimation error.

  18. Image encryption using fingerprint as key based on phase retrieval algorithm and public key cryptography

    Zhao, Tieyu; Ran, Qiwen; Yuan, Lin; Chi, Yingying; Ma, Jing

    2015-09-01

    In this paper, a novel image encryption system with fingerprint used as a secret key is proposed based on the phase retrieval algorithm and RSA public key algorithm. In the system, the encryption keys include the fingerprint and the public key of RSA algorithm, while the decryption keys are the fingerprint and the private key of RSA algorithm. If the users share the fingerprint, then the system will meet the basic agreement of asymmetric cryptography. The system is also applicable for the information authentication. The fingerprint as secret key is used in both the encryption and decryption processes so that the receiver can identify the authenticity of the ciphertext by using the fingerprint in decryption process. Finally, the simulation results show the validity of the encryption scheme and the high robustness against attacks based on the phase retrieval technique.

  19. Modeling Audio Fingerprints : Structure, Distortion, Capacity

    Doets, P.J.O.

    2010-01-01

    An audio fingerprint is a compact low-level representation of a multimedia signal. An audio fingerprint can be used to identify audio files or fragments in a reliable way. The use of audio fingerprints for identification consists of two phases. In the enrollment phase known content is fingerprinted,

  20. Semantically transparent fingerprinting for right protection of digital cinema

    Wu, Xiaolin

    2003-06-01

    Digital cinema, a new frontier and crown jewel of digital multimedia, has the potential of revolutionizing the science, engineering and business of movie production and distribution. The advantages of digital cinema technology over traditional analog technology are numerous and profound. But without effective and enforceable copyright protection measures, digital cinema can be more susceptible to widespread piracy, which can dampen or even prevent the commercial deployment of digital cinema. In this paper we propose a novel approach of fingerprinting each individual distribution copy of a digital movie for the purpose of tracing pirated copies back to their source. The proposed fingerprinting technique presents a fundamental departure from the traditional digital watermarking/fingerprinting techniques. Its novelty and uniqueness lie in a so-called semantic or subjective transparency property. The fingerprints are created by editing those visual and audio attributes that can be modified with semantic and subjective transparency to the audience. Semantically-transparent fingerprinting or watermarking is the most robust kind among all existing watermarking techniques, because it is content-based not sample-based, and semantically-recoverable not statistically-recoverable.

  1. Fingerprints of dynamical instabilities

    Chomaz, Ph.; Colonna, M.; Guarnera, A.

    1993-01-01

    It is explained why any reduced descriptions, such as mean field approximation, are stochastic in nature. It is shown that the introduction of this stochastic dynamics leads to a predictive theory in a statistical sens whatever the individual trajectories are characterized by the occurrence of bifurcations, instabilities or phase transitions. Concerning nuclear matter, the spinodal instability is discussed. In such a critical situation, the possibility to replace the stochastic part of the collision integral in the Boltzmann-Langevin model by the numerical noise associated with the finite number of test particles in ordinary BUU treatment is studied. It is shown that the fingerprints of these instabilities are kept during the evolution because of the relatively long recombination time compared with the typical time scales imposed by the Coulomb repulsion and the possible collective expansion. (author) 5 refs., 12 figs

  2. Influence of Skin Diseases on Fingerprint Recognition

    Drahansky, Martin; Dolezel, Michal; Urbanek, Jaroslav; Brezinova, Eva; Kim, Tai-hoon

    2012-01-01

    There are many people who suffer from some of the skin diseases. These diseases have a strong influence on the process of fingerprint recognition. People with fingerprint diseases are unable to use fingerprint scanners, which is discriminating for them, since they are not allowed to use their fingerprints for the authentication purposes. First in this paper the various diseases, which might influence functionality of the fingerprint-based systems, are introduced, mainly from the medical point of view. This overview is followed by some examples of diseased finger fingerprints, acquired both from dactyloscopic card and electronic sensors. At the end of this paper the proposed fingerprint image enhancement algorithm is described. PMID:22654483

  3. A simple low cost latent fingerprint sensor based on deflectometry and WFT analysis

    Dhanotia, Jitendra; Chatterjee, Amit; Bhatia, Vimal; Prakash, Shashi

    2018-02-01

    In criminal investigations, latent fingerprints are one of the most significant forms of evidence and most commonly used forensic investigation tool worldwide. The existing non-contact latent fingerprint detection systems are bulky, expensive and require environment which is shock and vibration resistant, thereby limiting their usability outside the laboratory. In this article, a compact, full field, low cost technique for profiling of fingerprints using deflectometry is proposed. Using inexpensive mobile phone screen based structured illumination, and windowed Fourier transform (WFT) based phase retrieval mechanism, the 2D and 3D phase plots reconstruct the profile information of the fingerprint. The phase information is also used to confirm a match between two fingerprints in real time. Since the proposed technique is non-interferometric, the measurements are least affected by environmental perturbations. Using the proposed technique, a portable sensor capable of field deployment has been realized.

  4. Families of quantum fingerprinting protocols

    Lovitz, Benjamin; Lütkenhaus, Norbert

    2018-03-01

    We introduce several families of quantum fingerprinting protocols to evaluate the equality function on two n -bit strings in the simultaneous message passing model. The original quantum fingerprinting protocol uses a tensor product of a small number of O (logn ) -qubit high-dimensional signals [H. Buhrman et al., Phys. Rev. Lett. 87, 167902 (2001), 10.1103/PhysRevLett.87.167902], whereas a recently proposed optical protocol uses a tensor product of O (n ) single-qubit signals, while maintaining the O (logn ) information leakage of the original protocol [J. M. Arazola and N. Lütkenhaus, Phys. Rev. A 89, 062305 (2014), 10.1103/PhysRevA.89.062305]. We find a family of protocols which interpolate between the original and optical protocols while maintaining the O (logn ) information leakage, thus demonstrating a tradeoff between the number of signals sent and the dimension of each signal. There has been interest in experimental realization of the recently proposed optical protocol using coherent states [F. Xu et al., Nat. Commun. 6, 8735 (2015), 10.1038/ncomms9735; J.-Y. Guan et al., Phys. Rev. Lett. 116, 240502 (2016), 10.1103/PhysRevLett.116.240502], but as the required number of laser pulses grows linearly with the input size n , eventual challenges for the long-time stability of experimental setups arise. We find a coherent state protocol which reduces the number of signals by a factor 1/2 while also reducing the information leakage. Our reduction makes use of a simple modulation scheme in optical phase space, and we find that more complex modulation schemes are not advantageous. Using a similar technique, we improve a recently proposed coherent state protocol for evaluating the Euclidean distance between two real unit vectors [N. Kumar et al., Phys. Rev. A 95, 032337 (2017), 10.1103/PhysRevA.95.032337] by reducing the number of signals by a factor 1/2 and also reducing the information leakage.

  5. Use of Isotopic Techniques for the Assessment of Hydrological Interactions Between Ground and Surface Waters - Rio Man, Cienaga Colombia

    Palacio, P.; Dapena, C.; Betancur, T. [Universidad de Antioquia, Medellin (Colombia)

    2013-07-15

    The Man River basin is located in the lower foothills of the western and central ranges of the tropical Andes, Colombia. In this area hydrological studies and hydrochemical analyses were carried out and isotopic techniques applied to describe and understand the interactions between ground and surface waters. To expand this model and to include elements other than local hydrodynamics, relationships between regional precipitation, recharge, regional flow paths and hydraulic gradients controlling water flows from big rivers to groundwater are currently being explored. Accordingly, an isotope local meteoric water line was derived and it was discovered that the relationship between ground and surface waters is similar in wet and dry seasons. Precipitation constitutes the main recharge source, base flow is important in supporting flow in rivers, streams and wetlands, and evaporation causes effects over water systems in dry periods. A tendency towards increasing air temperatures has been detected in the Man River; this change may cause negative impacts over the hydrological system, affecting evapotranspiration- recharge processes. (author)

  6. Distributed construction of quantum fingerprints

    Ambainis, Andris; Shi, Yaoyun

    2003-01-01

    Quantum fingerprints are useful quantum encodings introduced by Buhrman, Cleve, Watrous, and de Wolf (Physical Review Letters, Volume 87, Number 16, Article 167902, 2001; quant-ph/0102001) in obtaining an efficient quantum communication protocol. We design a protocol for constructing the fingerprint in a distributed scenario. As an application, this protocol gives rise to a communication protocol more efficient than the best known classical protocol for a communication problem.

  7. Rio+20

    Robert Horn

    2012-10-01

    Full Text Available This reflection on Rio+20 examines many of the major social institutions and how they fulfilled their functions during the United Nations Conference on Sustainable Development at Rio. The institutions are: 1. Nation-states as a collective. 2. Individual nation-states. 3. Vanguard institutions (some NGOs. 4. Action and convening NGOs. 5. Global media. 6. Governments of nation-states acting domestically 7. Individual governments in bilateral and multilateral situations. 8. Similar institutions in different countries acting together. 9. Businesses. 10. Global science. Each is considered within the assumptions of what the society expects them to deliver (in general, what is possible for them to deliver, and what they did deliver at Rio. In approaching Rio+20, our account differs considerably from much of the reportage by the mainstream media.

  8. Efficient and Secure Fingerprint Verification for Embedded Devices

    Sakiyama Kazuo

    2006-01-01

    Full Text Available This paper describes a secure and memory-efficient embedded fingerprint verification system. It shows how a fingerprint verification module originally developed to run on a workstation can be transformed and optimized in a systematic way to run real-time on an embedded device with limited memory and computation power. A complete fingerprint recognition module is a complex application that requires in the order of 1000 M unoptimized floating-point instruction cycles. The goal is to run both the minutiae extraction and the matching engines on a small embedded processor, in our case a 50 MHz LEON-2 softcore. It does require optimization and acceleration techniques at each design step. In order to speed up the fingerprint signal processing phase, we propose acceleration techniques at the algorithm level, at the software level to reduce the execution cycle number, and at the hardware level to distribute the system work load. Thirdly, a memory trace map-based memory reduction strategy is used for lowering the system memory requirement. Lastly, at the hardware level, it requires the development of specialized coprocessors. As results of these optimizations, we achieve a 65% reduction on the execution time and a 67% reduction on the memory storage requirement for the minutiae extraction process, compared against the reference implementation. The complete operation, that is, fingerprint capture, feature extraction, and matching, can be done in real-time of less than 4 seconds

  9. An SDN-Based Fingerprint Hopping Method to Prevent Fingerprinting Attacks

    Zheng Zhao

    2017-01-01

    Full Text Available Fingerprinting attacks are one of the most severe threats to the security of networks. Fingerprinting attack aims to obtain the operating system information of target hosts to make preparations for future attacks. In this paper, a fingerprint hopping method (FPH is proposed based on software-defined networks to defend against fingerprinting attacks. FPH introduces the idea of moving target defense to show a hopping fingerprint toward the fingerprinting attackers. The interaction of the fingerprinting attack and its defense is modeled as a signal game, and the equilibriums of the game are analyzed to develop an optimal defense strategy. Experiments show that FPH can resist fingerprinting attacks effectively.

  10. DNA Profiles from Fingerprint Lifts-Enhancing the Evidential Value of Fingermarks Through Successful DNA Typing.

    Subhani, Zuhaib; Daniel, Barbara; Frascione, Nunzianda

    2018-05-25

    This study evaluated the compatibility of the most common enhancement methods and lifting techniques with DNA profiling. Emphasis is placed on modern lifting techniques (i.e., gelatin lifters and Isomark™) and historical fingerprint lifts for which limited research has been previously conducted. A total of 180 fingerprints were deposited on a glass surface, enhanced, lifted, and processed for DNA typing. DNA could be extracted and profiled for all the powders and lifts tested and from both groomed fingerprints and natural prints with no significant difference in the percentage of profile recovered. DNA profiles could also be obtained from historical fingerprint lifts (79.2% of 72 lifts) with one or more alleles detected. These results demonstrate the compatibility between different powder/lift combinations and DNA profiling therefore augmenting the evidential value of fingerprints in forensic casework. © 2018 American Academy of Forensic Sciences.

  11. Fingerprint Change: Not Visible, But Tangible.

    Negri, Francesca V; De Giorgi, Annamaria; Bozzetti, Cecilia; Squadrilli, Anna; Petronini, Pier Giorgio; Leonardi, Francesco; Bisogno, Luigi; Garofano, Luciano

    2017-09-01

    Hand-foot syndrome, a chemotherapy-induced cutaneous toxicity, can cause an alteration in fingerprints causing a setback for cancer patients due to the occurrence of false rejections. A colon cancer patient was fingerprinted after not having been able to use fingerprint recognition devices after 6 months of adjuvant chemotherapy. The fingerprint images were digitally processed to improve fingerprint definition without altering the papillary design. No evidence of skin toxicity was present. Two months later, the situation returned to normal. The fingerprint evaluation conducted on 15 identification points highlighted the quantitative and qualitative fingerprint alteration details detected after the end of chemotherapy and 2 months later. Fingerprint alteration during chemotherapy has been reported, but to our knowledge, this particular case is the first ever reported without evident clinical signs. Alternative fingerprint identification methods as well as improved biometric identification systems are needed in case of unexpected situations. © 2017 American Academy of Forensic Sciences.

  12. Robust efficient video fingerprinting

    Puri, Manika; Lubin, Jeffrey

    2009-02-01

    We have developed a video fingerprinting system with robustness and efficiency as the primary and secondary design criteria. In extensive testing, the system has shown robustness to cropping, letter-boxing, sub-titling, blur, drastic compression, frame rate changes, size changes and color changes, as well as to the geometric distortions often associated with camcorder capture in cinema settings. Efficiency is afforded by a novel two-stage detection process in which a fast matching process first computes a number of likely candidates, which are then passed to a second slower process that computes the overall best match with minimal false alarm probability. One key component of the algorithm is a maximally stable volume computation - a three-dimensional generalization of maximally stable extremal regions - that provides a content-centric coordinate system for subsequent hash function computation, independent of any affine transformation or extensive cropping. Other key features include an efficient bin-based polling strategy for initial candidate selection, and a final SIFT feature-based computation for final verification. We describe the algorithm and its performance, and then discuss additional modifications that can provide further improvement to efficiency and accuracy.

  13. Generating cancelable fingerprint templates.

    Ratha, Nalini K; Chikkerur, Sharat; Connell, Jonathan H; Bolle, Ruud M

    2007-04-01

    Biometrics-based authentication systems offer obvious usability advantages over traditional password and token-based authentication schemes. However, biometrics raises several privacy concerns. A biometric is permanently associated with a user and cannot be changed. Hence, if a biometric identifier is compromised, it is lost forever and possibly for every application where the biometric is used. Moreover, if the same biometric is used in multiple applications, a user can potentially be tracked from one application to the next by cross-matching biometric databases. In this paper, we demonstrate several methods to generate multiple cancelable identifiers from fingerprint images to overcome these problems. In essence, a user can be given as many biometric identifiers as needed by issuing a new transformation "key." The identifiers can be cancelled and replaced when compromised. We empirically compare the performance of several algorithms such as Cartesian, polar, and surface folding transformations of the minutiae positions. It is demonstrated through multiple experiments that we can achieve revocability and prevent cross-matching of biometric databases. It is also shown that the transforms are noninvertible by demonstrating that it is computationally as hard to recover the original biometric identifier from a transformed version as by randomly guessing. Based on these empirical results and a theoretical analysis we conclude that feature-level cancelable biometric construction is practicable in large biometric deployments.

  14. Molecular fingerprinting of the Egyptian medicinal plant Cocculus ...

    Since no information about the genome of C. pendulus is available, the current study deals with molecular investigation of C. pendulus expressed by DNA fingerprinting of the young leaves of this plant using amplified fragment length polymorphism (AFLP) technique with four primer combinations. The obtained results ...

  15. Minutia-pair spectral representations for fingerprint template protection

    Stanko, T.; Skoric, B.

    2017-01-01

    We introduce a new fixed-length representation of fingerprint minutiae, for use in template protection. It is similar to the `spectral minutiae' representation of Xu et al. but is based on coordinate differences between pairs of minutiae. Our technique has the advantage that it does not discard the

  16. High Resolution Ultrasonic Method for 3D Fingerprint Representation in Biometrics

    Maev, R. Gr.; Bakulin, E. Y.; Maeva, E. Y.; Severin, F. M.

    Biometrics is an important field which studies different possible ways of personal identification. Among a number of existing biometric techniques fingerprint recognition stands alone - because very large database of fingerprints has already been acquired. Also, fingerprints are an important evidence that can be collected at a crime scene. Therefore, of all automated biometric techniques, especially in the field of law enforcement, fingerprint identification seems to be the most promising. Ultrasonic method of fingerprint imaging was originally introduced over a decade as the mapping of the reflection coefficient at the interface between the finger and a covering plate and has shown very good reliability and free from imperfections of previous two methods. This work introduces a newer development of the ultrasonic fingerprint imaging, focusing on the imaging of the internal structures of fingerprints (including sweat pores) with raw acoustic resolution of about 500 dpi (0.05 mm) using a scanning acoustic microscope to obtain images and acoustic data in the form of 3D data array. C-scans from different depths inside the fingerprint area of fingers of several volunteers were obtained and showed good contrast of ridges-and-valleys patterns and practically exact correspondence to the standard ink-and-paper prints of the same areas. Important feature reveled on the acoustic images was the clear appearance of the sweat pores, which could provide additional means of identification.

  17. The thermodynamics of latent fingerprint corrosion of metal elements and alloys.

    Bond, John W

    2008-11-01

    Redox reactions taking place between the surface of a metal and fingerprint residue have been expressed thermodynamically in terms of both the Nernst equation for reduction potential and the complexation constant for the formation of complex metal halide ions in aqueous solution. These expressions are used to explain experimental results for the corrosion of 10 different metal elements by fingerprint residue in air at room temperature. Corrosion of noble metals, such as silver and gold, supports the proposition that the degree of metal corrosion is enhanced by the presence of chloride ions in eccrine sweat. Extending the experiments to include 10 metal alloys enabled the construction of a fingerprint corrosion series for 20 different metals. Fingerprint corrosion on metals alloyed with > approximately 40% copper was found to display third level fingerprint detail. A comparison of both conventional ink on paper and digital (Livescan) fingerprinting techniques with fingerprints deposited on 9 Karat gold alloy has shown that gold alloy depositions are least susceptible to third level detail obliteration by poor fingerprint capturing techniques.

  18. The application of infrared chemical imaging to the detection and enhancement of latent fingerprints: method optimization and further findings.

    Tahtouh, Mark; Despland, Pauline; Shimmon, Ronald; Kalman, John R; Reedy, Brian J

    2007-09-01

    Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.

  19. Electronic fingerprinting of the dead.

    Rutty, G N; Stringer, K; Turk, E E

    2008-01-01

    To date, a number of methods exist for the capture of fingerprints from cadavers that can then be used in isolation as a primary method for the identification of the dead. We report the use of a handheld, mobile wireless unit used in conjunction with a personal digital assistant (PDA) device for the capture of fingerprints from the dead. We also consider a handheld single-digit fingerprint scanner that utilises a USB laptop connection for the electronic capture of cadaveric fingerprints. Both are single-operator units that, if ridge detail is preserved, can collect a 10-set of finger pad prints in approximately 45 and 90 s, respectively. We present our observations on the restrictions as to when such devices can be used with cadavers. We do, however, illustrate that the images are of sufficient quality to allow positive identification from finger pad prints of the dead. With the development of mobile, handheld, biometric, PDA-based units for the police, we hypothesize that, under certain circumstances, devices such as these could be used for the accelerated acquisition of fingerprint identification data with the potential for rapid near-patient identification in the future.

  20. Self-Organizing Maps for Fingerprint Image Quality Assessment

    Olsen, Martin Aastrup; Tabassi, Elham; Makarov, Anton

    2013-01-01

    Fingerprint quality assessment is a crucial task which needs to be conducted accurately in various phases in the biometric enrolment and recognition processes. Neglecting quality measurement will adversely impact accuracy and efficiency of biometric recognition systems (e.g. verification and iden......Fingerprint quality assessment is a crucial task which needs to be conducted accurately in various phases in the biometric enrolment and recognition processes. Neglecting quality measurement will adversely impact accuracy and efficiency of biometric recognition systems (e.g. verification...... machine learning techniques. We train a self-organizing map (SOM) to cluster blocks of fingerprint images based on their spatial information content. The output of the SOM is a high-level representation of the finger image, which forms the input to a Random Forest trained to learn the relationship between...

  1. Analysis of cellular and extracellular DNA in fingerprints

    Button, Julie M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-09

    It has been previously shown that DNA can be recovered from latent fingerprints left on various surfaces [R. A. H. van Oorschot and M. K. Jones, Nature 387, 767 (1997)]. However, the source of the DNA, extracellular versus cellular origin, is difficult to determine. If the DNA is cellular, it is believed to belong to skin cells while extracellular DNA is believed to originate from body fluids such as sweat [D. J. Daly et. al, Forensic Sci. Int. Genet. 6, 41-46 (2012); V. V. Vlassov et. al, BioEssays 29, 654-667 (2007)]. The origin of the DNA in fingerprints has implications for processing and interpretation of forensic evidence. The determination of the origin of DNA in fingerprints is further complicated by the fact that the DNA in fingerprints tends to be at a very low quantity [R. A. H. van Oorschot and M. K. Jones, Nature 387, 767 (1997)]. This study examined fingerprints from five volunteers left on sterilized glass slides and plastic pens. Three fingerprints were left on each glass slide (thumb, index, and middle fingers) while the pens were held as if one was writing with them. The DNA was collected from the objects using the wet swabbing technique (TE buffer). Following collection, the cellular and extracellular components of each sample were separated using centrifugation and an acoustofluidics system. Centrifugation is still the primary separation technique utilized in forensics laboratories, while acoustic focusing uses sound waves to focus large particles (cells) into low pressure nodes, separating them from the rest of the sample matrix. After separation, all samples were quantified using real-time quantitative PCR (qPCR). The overall trend is that there is more DNA in the extracellular fractions than cellular fractions for both centrifugation and acoustofluidic processing. Additionally, more DNA was generally collected from the pen samples than the samples left on glass slides.

  2. On the introduction of secondary fingerprint classification

    Msiza, IS

    2011-07-01

    Full Text Available The concept of fingerprint classification is an important one because of the need to, before executing a database search procedure, virtually break the fingerprint template database into smaller, manageable partitions. This is done in order to avoid...

  3. Fingerprint Recognition Using Minutia Score Matching

    J, Ravi.; Raja, K. B.; R, Venugopal. K.

    2010-01-01

    The popular Biometric used to authenticate a person is Fingerprint which is unique and permanent throughout a person’s life. A minutia matching is widely used for fingerprint recognition and can be classified as ridge ending and ridge bifurcation. In this paper we projected Fingerprint Recognition using Minutia Score Matching method (FRMSM). For Fingerprint thinning, the Block Filter is used, which scans the image at the boundary to preserves the quality of the image and extract the minutiae ...

  4. Polarization-based and specular-reflection-based noncontact latent fingerprint imaging and lifting

    Lin, Shih-Schön; Yemelyanov, Konstantin M.; Pugh, Edward N., Jr.; Engheta, Nader

    2006-09-01

    In forensic science the finger marks left unintentionally by people at a crime scene are referred to as latent fingerprints. Most existing techniques to detect and lift latent fingerprints require application of a certain material directly onto the exhibit. The chemical and physical processing applied to the fingerprint potentially degrades or prevents further forensic testing on the same evidence sample. Many existing methods also have deleterious side effects. We introduce a method to detect and extract latent fingerprint images without applying any powder or chemicals on the object. Our method is based on the optical phenomena of polarization and specular reflection together with the physiology of fingerprint formation. The recovered image quality is comparable to existing methods. In some cases, such as the sticky side of tape, our method shows unique advantages.

  5. Magnetic Resonance Fingerprinting with short relaxation intervals.

    Amthor, Thomas; Doneva, Mariya; Koken, Peter; Sommer, Karsten; Meineke, Jakob; Börnert, Peter

    2017-09-01

    The aim of this study was to investigate a technique for improving the performance of Magnetic Resonance Fingerprinting (MRF) in repetitive sampling schemes, in particular for 3D MRF acquisition, by shortening relaxation intervals between MRF pulse train repetitions. A calculation method for MRF dictionaries adapted to short relaxation intervals and non-relaxed initial spin states is presented, based on the concept of stationary fingerprints. The method is applicable to many different k-space sampling schemes in 2D and 3D. For accuracy analysis, T 1 and T 2 values of a phantom are determined by single-slice Cartesian MRF for different relaxation intervals and are compared with quantitative reference measurements. The relevance of slice profile effects is also investigated in this case. To further illustrate the capabilities of the method, an application to in-vivo spiral 3D MRF measurements is demonstrated. The proposed computation method enables accurate parameter estimation even for the shortest relaxation intervals, as investigated for different sampling patterns in 2D and 3D. In 2D Cartesian measurements, we achieved a scan acceleration of more than a factor of two, while maintaining acceptable accuracy: The largest T 1 values of a sample set deviated from their reference values by 0.3% (longest relaxation interval) and 2.4% (shortest relaxation interval). The largest T 2 values showed systematic deviations of up to 10% for all relaxation intervals, which is discussed. The influence of slice profile effects for multislice acquisition is shown to become increasingly relevant for short relaxation intervals. In 3D spiral measurements, a scan time reduction of 36% was achieved, maintaining the quality of in-vivo T1 and T2 maps. Reducing the relaxation interval between MRF sequence repetitions using stationary fingerprint dictionaries is a feasible method to improve the scan efficiency of MRF sequences. The method enables fast implementations of 3D spatially

  6. Entropy based fingerprint for local crystalline order

    Piaggi, Pablo M.; Parrinello, Michele

    2017-09-01

    We introduce a new fingerprint that allows distinguishing between liquid-like and solid-like atomic environments. This fingerprint is based on an approximate expression for the entropy projected on individual atoms. When combined with local enthalpy, this fingerprint acquires an even finer resolution and it is capable of discriminating between different crystal structures.

  7. Fingerprint Analysis with Marked Point Processes

    Forbes, Peter G. M.; Lauritzen, Steffen; Møller, Jesper

    We present a framework for fingerprint matching based on marked point process models. An efficient Monte Carlo algorithm is developed to calculate the marginal likelihood ratio for the hypothesis that two observed prints originate from the same finger against the hypothesis that they originate from...... different fingers. Our model achieves good performance on an NIST-FBI fingerprint database of 258 matched fingerprint pairs....

  8. Sex Determination from Fingerprint Ridge Density | Gungadin ...

    This study was conducted with an aim to establish a relationship between sex and fingerprint ridge density. The fingerprints were taken from 500 subjects (250 males and 250 females) in the age group of 18-60 years. After taking fingerprints, the ridges were counted in the upper portion of the radial border of each print for all ...

  9. A Compressed Sensing Framework for Magnetic Resonance Fingerprinting

    Davies, Mike; Puy, Gilles; Vandergheynst, Pierre; Wiaux, Yves

    2013-01-01

    Inspired by the recently proposed Magnetic Resonance Fingerprinting (MRF) technique, we develop a principled compressed sensing framework for quantitative MRI. The three key components are: a random pulse excitation sequence following the MRF technique; a random EPI subsampling strategy and an iterative projection algorithm that imposes consistency with the Bloch equations. We show that theoretically, as long as the excitation sequence possesses an appropriate form of persistent excitation, w...

  10. Enhancement of plant metabolite fingerprinting by machine learning.

    Scott, Ian M; Vermeer, Cornelia P; Liakata, Maria; Corol, Delia I; Ward, Jane L; Lin, Wanchang; Johnson, Helen E; Whitehead, Lynne; Kular, Baldeep; Baker, John M; Walsh, Sean; Dave, Anuja; Larson, Tony R; Graham, Ian A; Wang, Trevor L; King, Ross D; Draper, John; Beale, Michael H

    2010-08-01

    Metabolite fingerprinting of Arabidopsis (Arabidopsis thaliana) mutants with known or predicted metabolic lesions was performed by (1)H-nuclear magnetic resonance, Fourier transform infrared, and flow injection electrospray-mass spectrometry. Fingerprinting enabled processing of five times more plants than conventional chromatographic profiling and was competitive for discriminating mutants, other than those affected in only low-abundance metabolites. Despite their rapidity and complexity, fingerprints yielded metabolomic insights (e.g. that effects of single lesions were usually not confined to individual pathways). Among fingerprint techniques, (1)H-nuclear magnetic resonance discriminated the most mutant phenotypes from the wild type and Fourier transform infrared discriminated the fewest. To maximize information from fingerprints, data analysis was crucial. One-third of distinctive phenotypes might have been overlooked had data models been confined to principal component analysis score plots. Among several methods tested, machine learning (ML) algorithms, namely support vector machine or random forest (RF) classifiers, were unsurpassed for phenotype discrimination. Support vector machines were often the best performing classifiers, but RFs yielded some particularly informative measures. First, RFs estimated margins between mutant phenotypes, whose relations could then be visualized by Sammon mapping or hierarchical clustering. Second, RFs provided importance scores for the features within fingerprints that discriminated mutants. These scores correlated with analysis of variance F values (as did Kruskal-Wallis tests, true- and false-positive measures, mutual information, and the Relief feature selection algorithm). ML classifiers, as models trained on one data set to predict another, were ideal for focused metabolomic queries, such as the distinctiveness and consistency of mutant phenotypes. Accessible software for use of ML in plant physiology is highlighted.

  11. Generating One Biometric Feature from Another: Faces from Fingerprints

    Seref Sagiroglu

    2010-04-01

    Full Text Available This study presents a new approach based on artificial neural networks for generating one biometric feature (faces from another (only fingerprints. An automatic and intelligent system was designed and developed to analyze the relationships among fingerprints and faces and also to model and to improve the existence of the relationships. The new proposed system is the first study that generates all parts of the face including eyebrows, eyes, nose, mouth, ears and face border from only fingerprints. It is also unique and different from similar studies recently presented in the literature with some superior features. The parameter settings of the system were achieved with the help of Taguchi experimental design technique. The performance and accuracy of the system have been evaluated with 10-fold cross validation technique using qualitative evaluation metrics in addition to the expanded quantitative evaluation metrics. Consequently, the results were presented on the basis of the combination of these objective and subjective metrics for illustrating the qualitative properties of the proposed methods as well as a quantitative evaluation of their performances. Experimental results have shown that one biometric feature can be determined from another. These results have once more indicated that there is a strong relationship between fingerprints and faces.

  12. Generating One Biometric Feature from Another: Faces from Fingerprints

    Ozkaya, Necla; Sagiroglu, Seref

    2010-01-01

    This study presents a new approach based on artificial neural networks for generating one biometric feature (faces) from another (only fingerprints). An automatic and intelligent system was designed and developed to analyze the relationships among fingerprints and faces and also to model and to improve the existence of the relationships. The new proposed system is the first study that generates all parts of the face including eyebrows, eyes, nose, mouth, ears and face border from only fingerprints. It is also unique and different from similar studies recently presented in the literature with some superior features. The parameter settings of the system were achieved with the help of Taguchi experimental design technique. The performance and accuracy of the system have been evaluated with 10-fold cross validation technique using qualitative evaluation metrics in addition to the expanded quantitative evaluation metrics. Consequently, the results were presented on the basis of the combination of these objective and subjective metrics for illustrating the qualitative properties of the proposed methods as well as a quantitative evaluation of their performances. Experimental results have shown that one biometric feature can be determined from another. These results have once more indicated that there is a strong relationship between fingerprints and faces. PMID:22399877

  13. The spectroscopic detection of drugs of abuse in fingerprints after development with powders and recovery with adhesive lifters

    West, Matthew J.; Went, Michael J.

    2009-01-01

    The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes and are then stored in evidence bags to allow secure transit and also to preserve the chain of evidence. In a previous study we have shown that exogenous material within a fingerprint can be detected using Raman spectroscopy following development with powders and lifting with adhesive tapes. Other reports have detailed the use of Raman spectroscopy to the detection of drugs of abuse in latent fingerprints including cyanoacrylate-fumed fingerprints. This study involves the application of Raman spectroscopy for the analysis of drugs of abuse in latent fingerprints for fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. Samples of seized ecstasy, cocaine, ketamine and amphetamine were supplied by East Sussex Police and by the TICTAC unit at St. Georges Hospital Tooting. Contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Spectral subtraction was performed to remove peaks due to the hinge lifters using OMNIC software. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised. Although the application of

  14. MR fingerprinting reconstruction with Kalman filter.

    Zhang, Xiaodi; Zhou, Zechen; Chen, Shiyang; Chen, Shuo; Li, Rui; Hu, Xiaoping

    2017-09-01

    Magnetic resonance fingerprinting (MR fingerprinting or MRF) is a newly introduced quantitative magnetic resonance imaging technique, which enables simultaneous multi-parameter mapping in a single acquisition with improved time efficiency. The current MRF reconstruction method is based on dictionary matching, which may be limited by the discrete and finite nature of the dictionary and the computational cost associated with dictionary construction, storage and matching. In this paper, we describe a reconstruction method based on Kalman filter for MRF, which avoids the use of dictionary to obtain continuous MR parameter measurements. With this Kalman filter framework, the Bloch equation of inversion-recovery balanced steady state free-precession (IR-bSSFP) MRF sequence was derived to predict signal evolution, and acquired signal was entered to update the prediction. The algorithm can gradually estimate the accurate MR parameters during the recursive calculation. Single pixel and numeric brain phantom simulation were implemented with Kalman filter and the results were compared with those from dictionary matching reconstruction algorithm to demonstrate the feasibility and assess the performance of Kalman filter algorithm. The results demonstrated that Kalman filter algorithm is applicable for MRF reconstruction, eliminating the need for a pre-define dictionary and obtaining continuous MR parameter in contrast to the dictionary matching algorithm. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Influence of Skin Diseases on Fingerprint Recognition

    Martin Drahansky

    2012-01-01

    Full Text Available There are many people who suffer from some of the skin diseases. These diseases have a strong influence on the process of fingerprint recognition. People with fingerprint diseases are unable to use fingerprint scanners, which is discriminating for them, since they are not allowed to use their fingerprints for the authentication purposes. First in this paper the various diseases, which might influence functionality of the fingerprint-based systems, are introduced, mainly from the medical point of view. This overview is followed by some examples of diseased finger fingerprints, acquired both from dactyloscopic card and electronic sensors. At the end of this paper the proposed fingerprint image enhancement algorithm is described.

  16. An investigation of fake fingerprint detection approaches

    Ahmad, Asraful Syifaa'; Hassan, Rohayanti; Othman, Razib M.

    2017-10-01

    The most reliable biometrics technology, fingerprint recognition is widely used in terms of security due to its permanence and uniqueness. However, it is also vulnerable to the certain type of attacks including presenting fake fingerprints to the sensor which requires the development of new and efficient protection measures. Particularly, the aim is to identify the most recent literature related to the fake fingerprint recognition and only focus on software-based approaches. A systematic review is performed by analyzing 146 primary studies from the gross collection of 34 research papers to determine the taxonomy, approaches, online public databases, and limitations of the fake fingerprint. Fourteen software-based approaches have been briefly described, four limitations of fake fingerprint image were revealed and two known fake fingerprint databases were addressed briefly in this review. Therefore this work provides an overview of an insight into the current understanding of fake fingerprint recognition besides identifying future research possibilities.

  17. Accessible biometrics: A frustrated total internal reflection approach to imaging fingerprints.

    Smith, Nathan D; Sharp, James S

    2017-05-01

    Fingerprints are widely used as a means of identifying persons of interest because of the highly individual nature of the spatial distribution and types of features (or minuta) found on the surface of a finger. This individuality has led to their wide application in the comparison of fingerprints found at crime scenes with those taken from known offenders and suspects in custody. However, despite recent advances in machine vision technology and image processing techniques, fingerprint evidence is still widely being collected using outdated practices involving ink and paper - a process that can be both time consuming and expensive. Reduction of forensic service budgets increasingly requires that evidence be gathered and processed more rapidly and efficiently. However, many of the existing digital fingerprint acquisition devices have proven too expensive to roll out on a large scale. As a result new, low-cost imaging technologies are required to increase the quality and throughput of the processing of fingerprint evidence. Here we describe an inexpensive approach to digital fingerprint acquisition that is based upon frustrated total internal reflection imaging. The quality and resolution of the images produced are shown to be as good as those currently acquired using ink and paper based methods. The same imaging technique is also shown to be capable of imaging powdered fingerprints that have been lifted from a crime scene using adhesive tape or gel lifters. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

  18. A new method of artificial latent fingerprint creation using artificial sweat and inkjet printer.

    Hong, Sungwook; Hong, Ingi; Han, Aleum; Seo, Jin Yi; Namgung, Juyoung

    2015-12-01

    In order to study fingerprinting in the field of forensic science, it is very important to have two or more latent fingerprints with identical chemical composition and intensity. However, it is impossible to obtain identical fingerprints, in reality, because fingerprinting comes out slightly differently every time. A previous research study had proposed an artificial fingerprint creation method in which inkjet ink was replaced with amino acids and sodium chloride solution: the components of human sweat. But, this method had some drawbacks: divalent cations were not added while formulating the artificial sweat solution, and diluted solutions were used for creating weakly deposited latent fingerprint. In this study, a method was developed for overcoming the drawbacks of the methods used in the previous study. Several divalent cations were added in this study because the amino acid-ninhydrin (or some of its analogues) complex is known to react with divalent cations to produce a photoluminescent product; and, similarly, the amino acid-1,2-indanedione complex is known to be catalyzed by a small amount of zinc ions to produce a highly photoluminescent product. Also, in this study, a new technique was developed which enables to adjust the intensity when printing the latent fingerprint patterns. In this method, image processing software is used to control the intensity of the master fingerprint patterns, which adjusts the printing intensity of the latent fingerprints. This new method opened the way to produce a more realistic artificial fingerprint in various strengths with one artificial sweat working solution. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  19. Application of two-dimensional binary fingerprinting methods for the design of selective Tankyrase I inhibitors.

    Muddukrishna, B S; Pai, Vasudev; Lobo, Richard; Pai, Aravinda

    2017-11-22

    In the present study, five important binary fingerprinting techniques were used to model novel flavones for the selective inhibition of Tankyrase I. From the fingerprints used: the fingerprint atom pairs resulted in a statistically significant 2D QSAR model using a kernel-based partial least square regression method. This model indicates that the presence of electron-donating groups positively contributes to activity, whereas the presence of electron withdrawing groups negatively contributes to activity. This model could be used to develop more potent as well as selective analogues for the inhibition of Tankyrase I. Schematic representation of 2D QSAR work flow.

  20. Fingerprint verification prediction model in hand dermatitis.

    Lee, Chew K; Chang, Choong C; Johor, Asmah; Othman, Puwira; Baba, Roshidah

    2015-07-01

    Hand dermatitis associated fingerprint changes is a significant problem and affects fingerprint verification processes. This study was done to develop a clinically useful prediction model for fingerprint verification in patients with hand dermatitis. A case-control study involving 100 patients with hand dermatitis. All patients verified their thumbprints against their identity card. Registered fingerprints were randomized into a model derivation and model validation group. Predictive model was derived using multiple logistic regression. Validation was done using the goodness-of-fit test. The fingerprint verification prediction model consists of a major criterion (fingerprint dystrophy area of ≥ 25%) and two minor criteria (long horizontal lines and long vertical lines). The presence of the major criterion predicts it will almost always fail verification, while presence of both minor criteria and presence of one minor criterion predict high and low risk of fingerprint verification failure, respectively. When none of the criteria are met, the fingerprint almost always passes the verification. The area under the receiver operating characteristic curve was 0.937, and the goodness-of-fit test showed agreement between the observed and expected number (P = 0.26). The derived fingerprint verification failure prediction model is validated and highly discriminatory in predicting risk of fingerprint verification in patients with hand dermatitis. © 2014 The International Society of Dermatology.

  1. Fingerprint Liveness Detection in the Presence of Capable Intruders

    Sequeira, Ana F.; Cardoso, Jaime S.

    2015-01-01

    Fingerprint liveness detection methods have been developed as an attempt to overcome the vulnerability of fingerprint biometric systems to spoofing attacks. Traditional approaches have been quite optimistic about the behavior of the intruder assuming the use of a previously known material. This assumption has led to the use of supervised techniques to estimate the performance of the methods, using both live and spoof samples to train the predictive models and evaluate each type of fake samples individually. Additionally, the background was often included in the sample representation, completely distorting the decision process. Therefore, we propose that an automatic segmentation step should be performed to isolate the fingerprint from the background and truly decide on the liveness of the fingerprint and not on the characteristics of the background. Also, we argue that one cannot aim to model the fake samples completely since the material used by the intruder is unknown beforehand. We approach the design by modeling the distribution of the live samples and predicting as fake the samples very unlikely according to that model. Our experiments compare the performance of the supervised approaches with the semi-supervised ones that rely solely on the live samples. The results obtained differ from the ones obtained by the more standard approaches which reinforces our conviction that the results in the literature are misleadingly estimating the true vulnerability of the biometric system. PMID:26102491

  2. A preliminary study of DTI Fingerprinting on stroke analysis.

    Ma, Heather T; Ye, Chenfei; Wu, Jun; Yang, Pengfei; Chen, Xuhui; Yang, Zhengyi; Ma, Jingbo

    2014-01-01

    DTI (Diffusion Tensor Imaging) is a well-known MRI (Magnetic Resonance Imaging) technique which provides useful structural information about human brain. However, the quantitative measurement to physiological variation of subtypes of ischemic stroke is not available. An automatically quantitative method for DTI analysis will enhance the DTI application in clinics. In this study, we proposed a DTI Fingerprinting technology to quantitatively analyze white matter tissue, which was applied in stroke classification. The TBSS (Tract Based Spatial Statistics) method was employed to generate mask automatically. To evaluate the clustering performance of the automatic method, lesion ROI (Region of Interest) is manually drawn on the DWI images as a reference. The results from the DTI Fingerprinting were compared with those obtained from the reference ROIs. It indicates that the DTI Fingerprinting could identify different states of ischemic stroke and has promising potential to provide a more comprehensive measure of the DTI data. Further development should be carried out to improve DTI Fingerprinting technology in clinics.

  3. Fingerprint Liveness Detection in the Presence of Capable Intruders

    Ana F. Sequeira

    2015-06-01

    Full Text Available Fingerprint liveness detection methods have been developed as an attempt to overcome the vulnerability of fingerprint biometric systems to spoofing attacks. Traditional approaches have been quite optimistic about the behavior of the intruder assuming the use of a previously known material. This assumption has led to the use of supervised techniques to estimate the performance of the methods, using both live and spoof samples to train the predictive models and evaluate each type of fake samples individually. Additionally, the background was often included in the sample representation, completely distorting the decision process. Therefore, we propose that an automatic segmentation step should be performed to isolate the fingerprint from the background and truly decide on the liveness of the fingerprint and not on the characteristics of the background. Also, we argue that one cannot aim to model the fake samples completely since the material used by the intruder is unknown beforehand. We approach the design by modeling the distribution of the live samples and predicting as fake the samples very unlikely according to that model. Our experiments compare the performance of the supervised approaches with the semi-supervised ones that rely solely on the live samples. The results obtained differ from the ones obtained by the more standard approaches which reinforces our conviction that the results in the literature are misleadingly estimating the true vulnerability of the biometric system.

  4. Spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of Curcuma aromatica.

    Liu, Meiqiong; Wu, Youjiao; Huang, Shushi; Liu, Huagang; Feng, Jie

    2018-02-23

    Curcuma aromatica is used as a traditional Chinese medicine, and it is mainly distributed in Guangxi, China. In this study, 10 batches of C. aromatica were collected from different origins in Guangxi. The fingerprints were established by HPLC technique to investigate the quality stability of C. aromatica. The spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of C. aromatica was assessed by similarity analysis, gray relational analysis and multiple linear regression analysis. From the results, the similarity values between each batch of C. aromatica and reference fingerprint were >0.880, indicating the good quality stability of the 10 batches of C. aromatica. Twenty common peaks were selected as the fingerprints to evaluate the quality and hypolipidemic effect of C. aromatica. The results of spectrum-effect relationship showed that peaks 10, 18, 13, 15 and 17 in the fingerprints were closely related to hypolipidemic effect. This study successfully established the spectrum-effect relationship between HPLC fingerprints and hypolipidemic effect of C. aromatica, which provided methods for quality control and more effectively studies on bioactive compounds of C. aromatica. It could also provide a new simple and effective method for utilizing the fingerprints to optimize the Chinese prescription and develop traditional Chinese medicine. Copyright © 2018 John Wiley & Sons, Ltd.

  5. A Computational Discriminability Analysis on Twin Fingerprints

    Liu, Yu; Srihari, Sargur N.

    Sharing similar genetic traits makes the investigation of twins an important study in forensics and biometrics. Fingerprints are one of the most commonly found types of forensic evidence. The similarity between twins’ prints is critical establish to the reliability of fingerprint identification. We present a quantitative analysis of the discriminability of twin fingerprints on a new data set (227 pairs of identical twins and fraternal twins) recently collected from a twin population using both level 1 and level 2 features. Although the patterns of minutiae among twins are more similar than in the general population, the similarity of fingerprints of twins is significantly different from that between genuine prints of the same finger. Twins fingerprints are discriminable with a 1.5%~1.7% higher EER than non-twins. And identical twins can be distinguished by examine fingerprint with a slightly higher error rate than fraternal twins.

  6. Forensic Discrimination of Latent Fingerprints Using Laser-Induced Breakdown Spectroscopy (LIBS) and Chemometric Approaches.

    Yang, Jun-Ho; Yoh, Jack J

    2018-01-01

    A novel technique is reported for separating overlapping latent fingerprints using chemometric approaches that combine laser-induced breakdown spectroscopy (LIBS) and multivariate analysis. The LIBS technique provides the capability of real time analysis and high frequency scanning as well as the data regarding the chemical composition of overlapping latent fingerprints. These spectra offer valuable information for the classification and reconstruction of overlapping latent fingerprints by implementing appropriate statistical multivariate analysis. The current study employs principal component analysis and partial least square methods for the classification of latent fingerprints from the LIBS spectra. This technique was successfully demonstrated through a classification study of four distinct latent fingerprints using classification methods such as soft independent modeling of class analogy (SIMCA) and partial least squares discriminant analysis (PLS-DA). The novel method yielded an accuracy of more than 85% and was proven to be sufficiently robust. Furthermore, through laser scanning analysis at a spatial interval of 125 µm, the overlapping fingerprints were reconstructed as separate two-dimensional forms.

  7. Fingerprint start the next generation of payment method : Fingerprint payment: a new mode of mobile payment

    Wu, Chong

    2016-01-01

    In the generation of mobile internet, fingerprint payment is one of the most popular topics at the moment. China has a big market and many users are using the mobile payment methods. There are a large number of mobile phones equipped with fingerprint recognition technology. As we know, fingerprint payment brings us more convenience and safety. We do not need to use many bankcards, and fingerprint also eliminates the users from the trouble of queuing to pay. However, users send traditional dig...

  8. Study on internal to surface fingerprint correlation using optical coherence tomography and internal fingerprint extraction

    Darlow, LN

    2015-11-01

    Full Text Available of, the above-mentioned works. Internal fingerprint zone detection is an improvement as it uses fuzzy c-means to improve clustering performance, uses better cluster result postprocessing, and improves upon the fine-tuning procedure through... Internal fingerprint extraction consists of two main parts: fingerprint zone detection and extraction. Zone detection uses fuzzy c-means clustering to approximate the location of the papillary junction (i.e., the internal fingerprint zone). Edge detection...

  9. Fingerprint multicast in secure video streaming.

    Zhao, H Vicky; Liu, K J Ray

    2006-01-01

    Digital fingerprinting is an emerging technology to protect multimedia content from illegal redistribution, where each distributed copy is labeled with unique identification information. In video streaming, huge amount of data have to be transmitted to a large number of users under stringent latency constraints, so the bandwidth-efficient distribution of uniquely fingerprinted copies is crucial. This paper investigates the secure multicast of anticollusion fingerprinted video in streaming applications and analyzes their performance. We first propose a general fingerprint multicast scheme that can be used with most spread spectrum embedding-based multimedia fingerprinting systems. To further improve the bandwidth efficiency, we explore the special structure of the fingerprint design and propose a joint fingerprint design and distribution scheme. From our simulations, the two proposed schemes can reduce the bandwidth requirement by 48% to 87%, depending on the number of users, the characteristics of video sequences, and the network and computation constraints. We also show that under the constraint that all colluders have the same probability of detection, the embedded fingerprints in the two schemes have approximately the same collusion resistance. Finally, we propose a fingerprint drift compensation scheme to improve the quality of the reconstructed sequences at the decoder's side without introducing extra communication overhead.

  10. Flow cytometric fingerprinting for microbial strain discrimination and physiological characterization.

    Buysschaert, Benjamin; Kerckhof, Frederiek-Maarten; Vandamme, Peter; De Baets, Bernard; Boon, Nico

    2018-02-01

    The analysis of microbial populations is fundamental, not only for developing a deeper understanding of microbial communities but also for their engineering in biotechnological applications. Many methods have been developed to study their characteristics and over the last few decades, molecular analysis tools, such as DNA sequencing, have been used with considerable success to identify the composition of microbial populations. Recently, flow cytometric fingerprinting is emerging as a promising and powerful method to analyze bacterial populations. So far, these methods have primarily been used to observe shifts in the composition of microbial communities of natural samples. In this article, we apply a flow cytometric fingerprinting method to discriminate among 29 Lactobacillus strains. Our results indicate that it is possible to discriminate among 27 Lactobacillus strains by staining with SYBR green I and that the discriminatory power can be increased by combined SYBR green I and propidium iodide staining. Furthermore, we illustrate the impact of physiological changes on the fingerprinting method by demonstrating how flow cytometric fingerprinting is able to discriminate the different growth phases of a microbial culture. The sensitivity of the method is assessed by its ability to detect changes in the relative abundance of a mix of polystyrene beads down to 1.2%. When a mix of bacteria was used, the sensitivity was as between 1.2% and 5%. The presented data demonstrate that flow cytometric fingerprinting is a sensitive and reproducible technique with the potential to be applied as a method for the dereplication of bacterial isolates. © 2017 International Society for Advancement of Cytometry. © 2017 International Society for Advancement of Cytometry.

  11. Typing DNA profiles from previously enhanced fingerprints using direct PCR.

    Templeton, Jennifer E L; Taylor, Duncan; Handt, Oliva; Linacre, Adrian

    2017-07-01

    Fingermarks are a source of human identification both through the ridge patterns and DNA profiling. Typing nuclear STR DNA markers from previously enhanced fingermarks provides an alternative method of utilising the limited fingermark deposit that can be left behind during a criminal act. Dusting with fingerprint powders is a standard method used in classical fingermark enhancement and can affect DNA data. The ability to generate informative DNA profiles from powdered fingerprints using direct PCR swabs was investigated. Direct PCR was used as the opportunity to generate usable DNA profiles after performing any of the standard DNA extraction processes is minimal. Omitting the extraction step will, for many samples, be the key to success if there is limited sample DNA. DNA profiles were generated by direct PCR from 160 fingermarks after treatment with one of the following dactyloscopic fingerprint powders: white hadonite; silver aluminium; HiFi Volcano silk black; or black magnetic fingerprint powder. This was achieved by a combination of an optimised double-swabbing technique and swab media, omission of the extraction step to minimise loss of critical low-template DNA, and additional AmpliTaq Gold ® DNA polymerase to boost the PCR. Ninety eight out of 160 samples (61%) were considered 'up-loadable' to the Australian National Criminal Investigation DNA Database (NCIDD). The method described required a minimum of working steps, equipment and reagents, and was completed within 4h. Direct PCR allows the generation of DNA profiles from enhanced prints without the need to increase PCR cycle numbers beyond manufacturer's recommendations. Particular emphasis was placed on preventing contamination by applying strict protocols and avoiding the use of previously used fingerprint brushes. Based on this extensive survey, the data provided indicate minimal effects of any of these four powders on the chance of obtaining DNA profiles from enhanced fingermarks. Copyright © 2017

  12. Efficiency and Flexibility of Fingerprint Scheme Using Partial Encryption and Discrete Wavelet Transform to Verify User in Cloud Computing.

    Yassin, Ali A

    2014-01-01

    Now, the security of digital images is considered more and more essential and fingerprint plays the main role in the world of image. Furthermore, fingerprint recognition is a scheme of biometric verification that applies pattern recognition techniques depending on image of fingerprint individually. In the cloud environment, an adversary has the ability to intercept information and must be secured from eavesdroppers. Unluckily, encryption and decryption functions are slow and they are often hard. Fingerprint techniques required extra hardware and software; it is masqueraded by artificial gummy fingers (spoof attacks). Additionally, when a large number of users are being verified at the same time, the mechanism will become slow. In this paper, we employed each of the partial encryptions of user's fingerprint and discrete wavelet transform to obtain a new scheme of fingerprint verification. Moreover, our proposed scheme can overcome those problems; it does not require cost, reduces the computational supplies for huge volumes of fingerprint images, and resists well-known attacks. In addition, experimental results illustrate that our proposed scheme has a good performance of user's fingerprint verification.

  13. Fingerprinting the Milky Way

    2007-03-01

    Using ESO's Very Large Telescope, an international team of astronomers has shown how to use the chemical composition of stars in clusters to shed light on the formation of our Milky Way. This discovery is a fundamental test for the development of a new chemical tagging technique uncovering the birth and growth of our Galactic cradle. The formation and evolution of galaxies, and in particular of the Milky Way - the 'island universe' in which we live, is one of the major puzzles of astrophysics: indeed, a detailed physical scenario is still missing and its understanding requires the joint effort of observations, theories and complex numerical simulations. ESO astronomer Gayandhi De Silva and her colleagues used the Ultraviolet and Visual Echelle Spectrograph (UVES) on ESO's VLT to find new ways to address this fundamental riddle. ESO PR Photo 15/07 ESO PR Photo 15/07 The Cluster Collinder 261 "We have analysed in great detail the chemical composition of stars in three star-clusters and shown that each cluster presents a high level of homogeneity and a very distinctive chemical signature," says De Silva, who started this research while working at the Mount Stromlo Observatory, Australia. "This paves the way to chemically tagging stars in our Galaxy to common formation sites and thus unravelling the history of the Milky Way," she adds. "Galactic star clusters are witnesses of the formation history of the Galactic disc," says Kenneth Freeman, also from Mount Stromlo and another member of the team. "The analysis of their composition is like studying ancient fossils. We are chasing pieces of galactic DNA!" Open star clusters are among the most important tools for the study of stellar and galactic evolution. They are composed of a few tens up to a few thousands of stars that are gravitationally bound, and they span a wide range of ages. The youngest date from a few million years ago, while the oldest (and more rare) can have ages up to ten billion years. The well

  14. Técnica da instilação de colírios em pacientes portadores de glaucoma crônico Eye drop instillation technique in chronic glaucoma patients

    Paulo Gelman Vaidergorn

    2003-12-01

    Full Text Available OBJETIVO: Verificar a técnica da instilação de colírio em pacientes portadores de glaucoma crônico. MÉTODOS: Estudo prospectivo realizado em 193 pacientes glaucomatosos. Para cada participante era entregue um frasco de colírio lubrificante (Dunason®, Laboratório Alcon, São Paulo, Brasil e solicitado que realizasse uma instilação. RESULTADOS: Os participantes utilizaram, em média, 1,64 ± 1,26 gotas de colírio por instilação e 54,5% dos pacientes fizeram contato do bico do colírio com a superfície ocular. Em 3,1% das instilações nenhuma gota de medicamento atingiu o olho, com o paciente não se dando conta do fato. A oclusão do ponto lacrimal ou a manutenção do olho fechado por dois minutos após a instilação não foi realizada em 87,0% dos participantes, e 61,6% piscaram repetidas vezes imediatamente após instilar a droga. CONCLUSÕES: Verificou-se que a maior parte dos participantes deste estudo efetuou a instilação do colírio de modo incorreto. Isto significa desperdiçar grande parte do conteúdo do frasco, aumentar as possibilidades de toxicidade sistêmica, não aproveitar a plenitude do efeito hipotensor das drogas e contaminar a extremidade do frasco de colírio. Portanto, o ensino da técnica adequada da instilação de colírio é absolutamente necessária para todos os pacientes.PURPOSE: To observe eye drop instillation technique in chronic glaucoma patients. METHODS: This is a prospective study enrolling 193 glaucomatous patients. Each received a sample of lubricant eye drop bottle (Dunason®, Alcon Laboratories, São Paulo, Brazil and was instructed to use it once. RESULTS: All patients used a mean amount of 1.64 ± 1.26 drops. In 54.5% of the patients, the eyedropper touched the eye and adnexa. In 3.1% the drops were not placed in the eye, without the patient being aware of this. In 87.0% of them, neither the lacrimal point occlusion nor the closure of the eyes for two minutes after instillation were

  15. DNA fingerprinting, DNA barcoding, and next generation sequencing technology in plants.

    Sucher, Nikolaus J; Hennell, James R; Carles, Maria C

    2012-01-01

    DNA fingerprinting of plants has become an invaluable tool in forensic, scientific, and industrial laboratories all over the world. PCR has become part of virtually every variation of the plethora of approaches used for DNA fingerprinting today. DNA sequencing is increasingly used either in combination with or as a replacement for traditional DNA fingerprinting techniques. A prime example is the use of short, standardized regions of the genome as taxon barcodes for biological identification of plants. Rapid advances in "next generation sequencing" (NGS) technology are driving down the cost of sequencing and bringing large-scale sequencing projects into the reach of individual investigators. We present an overview of recent publications that demonstrate the use of "NGS" technology for DNA fingerprinting and DNA barcoding applications.

  16. Detection of visible and latent fingerprints using micro-X-ray fluorescence elemental imaging.

    Worley, Christopher G; Wiltshire, Sara S; Miller, Thomasin C; Havrilla, George J; Majidi, Vahid

    2006-01-01

    Using micro-X-ray fluorescence (MXRF), a novel means of detecting fingerprints was examined in which the prints were imaged based on their elemental composition. MXRF is a nondestructive technique. Although this method requires a priori knowledge about the approximate location of a print, it offers a new and complementary means for detecting fingerprints that are also left pristine for further analysis (including potential DNA extraction) or archiving purposes. Sebaceous fingerprints and those made after perspiring were detected based on elements such as potassium and chlorine present in the print residue. Unique prints were also detected including those containing lotion, saliva, banana, or sunscreen. This proof-of-concept study demonstrates the potential for visualizing fingerprints by MXRF on surfaces that can be problematic using current methods.

  17. Every Move You Make: Exploring Practical Issues in Smartphone Motion Sensor Fingerprinting and Countermeasures

    Das Anupam

    2018-01-01

    Full Text Available The ability to track users’ activities across different websites and visits is a key tool in advertising and surveillance. The HTML5 DeviceMotion interface creates a new opportunity for such tracking via fingerprinting of smartphone motion sensors. We study the feasibility of carrying out such fingerprinting under real-world constraints and on a large scale. In particular, we collect measurements from several hundred users under realistic scenarios and show that the state-of-the-art techniques provide very low accuracy in these settings. We then improve fingerprinting accuracy by changing the classifier as well as incorporating auxiliary information. We also show how to perform fingerprinting in an open-world scenario where one must distinguish between known and previously unseen users.

  18. Lead (Pb) isotopic fingerprinting and its applications in lead pollution studies in China: a review.

    Cheng, Hefa; Hu, Yuanan

    2010-05-01

    As the most widely scattered toxic metal in the world, the sources of lead (Pb) observed in contamination investigation are often difficult to identify. This review presents an overview of the principles, analysis, and applications of Pb isotopic fingerprinting in tracing the origins and transport pathways of Pb in the environment. It also summarizes the history and current status of lead pollution in China, and illustrates the power of Pb isotopic fingerprinting with examples of its recent applications in investigating the effectiveness of leaded gasoline phase-out on atmospheric lead pollution, and the sources of Pb found in various environmental media (plants, sediments, and aquatic organisms) in China. The limitations of Pb isotopic fingerprinting technique are discussed and a perspective on its development is also presented. Further methodological developments and more widespread instrument availability are expected to make isotopic fingerprinting one of the key tools in lead pollution investigation. Copyright 2009 Elsevier Ltd. All rights reserved.

  19. Fingerprint detection on counterfeit US dollar banknotes: the importance of preliminary paper examination.

    Azoury, Myriam; Cohen, Drorit; Himberg, Kimmo; Qvintus-Leino, Pia; Saari, Terhi; Almog, Joseph

    2004-09-01

    Two seizures of counterfeit 100 US dollar bills related to the same indicative number were submitted for processing of latent fingerprints. On one group of notes, identifiable fingerprints could be detected by the routine application of amino acid reagents. In the second case, this technique gave no results, even on deliberately deposited prints. Fingerprints could be revealed, however, by cyanoacrylate fuming followed by magnetic powder. Comprehensive paper analysis showed that banknotes from both seizures differed remarkably by chemical composition as well as paper macroscopic properties. The difference in surface free energy (related to surface tension) of the banknotes in the two groups seemed to be the major factor responsible for the great variance in fingerprint detectability.

  20. Development and assessment of microarray-based DNA fingerprinting in Eucalyptus grandis.

    Lezar, Sabine; Myburg, A A; Berger, D K; Wingfield, M J; Wingfield, B D

    2004-11-01

    Development of improved Eucalyptus genotypes involves the routine identification of breeding stock and superior clones. Currently, microsatellites and random amplified polymorphic DNA markers are the most widely used DNA-based techniques for fingerprinting of these trees. While these techniques have provided rapid and powerful fingerprinting assays, they are constrained by their reliance on gel or capillary electrophoresis, and therefore, relatively low throughput of fragment analysis. In contrast, recently developed microarray technology holds the promise of parallel analysis of thousands of markers in plant genomes. The aim of this study was to develop a DNA fingerprinting chip for Eucalyptus grandis and to investigate its usefulness for fingerprinting of eucalypt trees. A prototype chip was prepared using a partial genomic library from total genomic DNA of 23 E. grandis trees, of which 22 were full siblings. A total of 384 cloned genomic fragments were individually amplified and arrayed onto glass slides. DNA fingerprints were obtained for 17 individuals by hybridizing labeled genome representations of the individual trees to the 384-element chip. Polymorphic DNA fragments were identified by evaluating the binary distribution of their background-corrected signal intensities across full-sib individuals. Among 384 DNA fragments on the chip, 104 (27%) were found to be polymorphic. Hybridization of these polymorphic fragments was highly repeatable (R2>0.91) within the E. grandis individuals, and they allowed us to identify all 17 full-sib individuals. Our results suggest that DNA microarrays can be used to effectively fingerprint large numbers of closely related Eucalyptus trees.

  1. Rio report

    Saxe, D

    1992-08-01

    At the world-wide Earth Summit held in Rio de Janeiro in 1992, two new legally binding documents were signed by over 140 countries: the Convention on Climate Change and the Convention on Biological Diversity. These conventions will come into force when ratified by 50 and 30 countries respectively. The objectives of these conventions, the steps to be taken toward their compliance, and their implications for Canada are discussed. Since climatic change could bring about adverse effects such as water shortages and loss of permafrost, Canada has committed itself to a quick start toward compliance with preparation of a detailed national inventory of greenhouse gas emissions. The biodiversity convention could make it harder to develop hydropower in Canada at the same time that the climate change convention makes hydropower more attractive. Other documents from the Earth Summit included declarations on forestry management, sustainable development, and future conventions on desertification and fishing. Notable features of the summit included a refocusing of the environmental agenda to the priorities of the poorer countries, a recognition that environmental issues are linked to poverty and economic development, and an attack on the consumption patterns of the richer countries.

  2. Rio report

    Saxe, D.

    1992-01-01

    At the world-wide Earth Summit held in Rio de Janeiro in 1992, two new legally binding documents were signed by over 140 countries: the Convention on Climate Change and the Convention on Biological Diversity. These conventions will come into force when ratified by 50 and 30 countries respectively. The objectives of these conventions, the steps to be taken toward their compliance, and their implications for Canada are discussed. Since climatic change could bring about adverse effects such as water shortages and loss of permafrost, Canada has committed itself to a quick start toward compliance with preparation of a detailed national inventory of greenhouse gas emissions. The biodiversity convention could make it harder to develop hydropower in Canada at the same time that the climate change convention makes hydropower more attractive. Other documents from the Earth Summit included declarations on forestry management, sustainable development, and future conventions on desertification and fishing. Notable features of the summit included a refocusing of the environmental agenda to the priorities of the poorer countries, a recognition that environmental issues are linked to poverty and economic development, and an attack on the consumption patterns of the richer countries

  3. Forensic comparison and matching of fingerprints: using quantitative image measures for estimating error rates through understanding and predicting difficulty.

    Philip J Kellman

    Full Text Available Latent fingerprint examination is a complex task that, despite advances in image processing, still fundamentally depends on the visual judgments of highly trained human examiners. Fingerprints collected from crime scenes typically contain less information than fingerprints collected under controlled conditions. Specifically, they are often noisy and distorted and may contain only a portion of the total fingerprint area. Expertise in fingerprint comparison, like other forms of perceptual expertise, such as face recognition or aircraft identification, depends on perceptual learning processes that lead to the discovery of features and relations that matter in comparing prints. Relatively little is known about the perceptual processes involved in making comparisons, and even less is known about what characteristics of fingerprint pairs make particular comparisons easy or difficult. We measured expert examiner performance and judgments of difficulty and confidence on a new fingerprint database. We developed a number of quantitative measures of image characteristics and used multiple regression techniques to discover objective predictors of error as well as perceived difficulty and confidence. A number of useful predictors emerged, and these included variables related to image quality metrics, such as intensity and contrast information, as well as measures of information quantity, such as the total fingerprint area. Also included were configural features that fingerprint experts have noted, such as the presence and clarity of global features and fingerprint ridges. Within the constraints of the overall low error rates of experts, a regression model incorporating the derived predictors demonstrated reasonable success in predicting objective difficulty for print pairs, as shown both in goodness of fit measures to the original data set and in a cross validation test. The results indicate the plausibility of using objective image metrics to predict expert

  4. Forensic comparison and matching of fingerprints: using quantitative image measures for estimating error rates through understanding and predicting difficulty.

    Kellman, Philip J; Mnookin, Jennifer L; Erlikhman, Gennady; Garrigan, Patrick; Ghose, Tandra; Mettler, Everett; Charlton, David; Dror, Itiel E

    2014-01-01

    Latent fingerprint examination is a complex task that, despite advances in image processing, still fundamentally depends on the visual judgments of highly trained human examiners. Fingerprints collected from crime scenes typically contain less information than fingerprints collected under controlled conditions. Specifically, they are often noisy and distorted and may contain only a portion of the total fingerprint area. Expertise in fingerprint comparison, like other forms of perceptual expertise, such as face recognition or aircraft identification, depends on perceptual learning processes that lead to the discovery of features and relations that matter in comparing prints. Relatively little is known about the perceptual processes involved in making comparisons, and even less is known about what characteristics of fingerprint pairs make particular comparisons easy or difficult. We measured expert examiner performance and judgments of difficulty and confidence on a new fingerprint database. We developed a number of quantitative measures of image characteristics and used multiple regression techniques to discover objective predictors of error as well as perceived difficulty and confidence. A number of useful predictors emerged, and these included variables related to image quality metrics, such as intensity and contrast information, as well as measures of information quantity, such as the total fingerprint area. Also included were configural features that fingerprint experts have noted, such as the presence and clarity of global features and fingerprint ridges. Within the constraints of the overall low error rates of experts, a regression model incorporating the derived predictors demonstrated reasonable success in predicting objective difficulty for print pairs, as shown both in goodness of fit measures to the original data set and in a cross validation test. The results indicate the plausibility of using objective image metrics to predict expert performance and

  5. DNA Fingerprinting in a Forensic Teaching Experiment

    Wagoner, Stacy A.; Carlson, Kimberly A.

    2008-01-01

    This article presents an experiment designed to provide students, in a classroom laboratory setting, a hands-on demonstration of the steps used in DNA forensic analysis by performing DNA extraction, DNA fingerprinting, and statistical analysis of the data. This experiment demonstrates how DNA fingerprinting is performed and how long it takes. It…

  6. Extracting subsurface fingerprints using optical coherence tomography

    Akhoury, SS

    2015-02-01

    Full Text Available Subsurface Fingerprints using Optical Coherence Tomography Sharat Saurabh Akhoury, Luke Nicholas Darlow Modelling and Digital Science, Council for Scientific and Industrial Research, Pretoria, South Africa Abstract Physiologists have found... approach to extract the subsurface fingerprint representation using a high-resolution imaging technology known as Optical Coherence Tomography (OCT). ...

  7. Tools for quality control of fingerprint databases

    Swann, B. Scott; Libert, John M.; Lepley, Margaret A.

    2010-04-01

    Integrity of fingerprint data is essential to biometric and forensic applications. Accordingly, the FBI's Criminal Justice Information Services (CJIS) Division has sponsored development of software tools to facilitate quality control functions relative to maintaining its fingerprint data assets inherent to the Integrated Automated Fingerprint Identification System (IAFIS) and Next Generation Identification (NGI). This paper provides an introduction of two such tools. The first FBI-sponsored tool was developed by the National Institute of Standards and Technology (NIST) and examines and detects the spectral signature of the ridge-flow structure characteristic of friction ridge skin. The Spectral Image Validation/Verification (SIVV) utility differentiates fingerprints from non-fingerprints, including blank frames or segmentation failures erroneously included in data; provides a "first look" at image quality; and can identify anomalies in sample rates of scanned images. The SIVV utility might detect errors in individual 10-print fingerprints inaccurately segmented from the flat, multi-finger image acquired by one of the automated collection systems increasing in availability and usage. In such cases, the lost fingerprint can be recovered by re-segmentation from the now compressed multi-finger image record. The second FBI-sponsored tool, CropCoeff was developed by MITRE and thoroughly tested via NIST. CropCoeff enables cropping of the replacement single print directly from the compressed data file, thus avoiding decompression and recompression of images that might degrade fingerprint features necessary for matching.

  8. Predicting the performance of fingerprint similarity searching.

    Vogt, Martin; Bajorath, Jürgen

    2011-01-01

    Fingerprints are bit string representations of molecular structure that typically encode structural fragments, topological features, or pharmacophore patterns. Various fingerprint designs are utilized in virtual screening and their search performance essentially depends on three parameters: the nature of the fingerprint, the active compounds serving as reference molecules, and the composition of the screening database. It is of considerable interest and practical relevance to predict the performance of fingerprint similarity searching. A quantitative assessment of the potential that a fingerprint search might successfully retrieve active compounds, if available in the screening database, would substantially help to select the type of fingerprint most suitable for a given search problem. The method presented herein utilizes concepts from information theory to relate the fingerprint feature distributions of reference compounds to screening libraries. If these feature distributions do not sufficiently differ, active database compounds that are similar to reference molecules cannot be retrieved because they disappear in the "background." By quantifying the difference in feature distribution using the Kullback-Leibler divergence and relating the divergence to compound recovery rates obtained for different benchmark classes, fingerprint search performance can be quantitatively predicted.

  9. Fingerprint matching on smart card: A review

    Baruni, Kedimotse P

    2016-12-01

    Full Text Available Fingerprint Match-on-Card (MoC) offers the highest degree of privacy and security to cardholders as the fingerprint never leaves the secure environment of a smart card. The level of security of a biometric system is evaluated by the location where...

  10. The FBI compression standard for digitized fingerprint images

    Brislawn, C.M.; Bradley, J.N. [Los Alamos National Lab., NM (United States); Onyshczak, R.J. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Hopper, T. [Federal Bureau of Investigation, Washington, DC (United States)

    1996-10-01

    The FBI has formulated national standards for digitization and compression of gray-scale fingerprint images. The compression algorithm for the digitized images is based on adaptive uniform scalar quantization of a discrete wavelet transform subband decomposition, a technique referred to as the wavelet/scalar quantization method. The algorithm produces archival-quality images at compression ratios of around 15 to 1 and will allow the current database of paper fingerprint cards to be replaced by digital imagery. A compliance testing program is also being implemented to ensure high standards of image quality and interchangeability of data between different implementations. We will review the current status of the FBI standard, including the compliance testing process and the details of the first-generation encoder.

  11. The expansion of the sugarcane in the hydrographic basin from Rio Brilhante, Mato Grosso do Sul state: the use of NDVI technique as an instrument for evidencing territorial dynamics

    Patricia Silva Ferreira

    2016-12-01

    Full Text Available The areas of sugarcane cultivation have expanding, often at the expense of the agricultural and pasture areas. Under this perspective, this manuscript aims to present a methodological guide in order to identify and to map up the areas of sugarcane cultivation, whose unity of analysis was located in the surrounding area of the Rio Brilhante hydrographic basin. We aimed to identify the changes through TM-Landsat5 and OLI-Landsat8 satellite pictures by comparing the scenarios from the years of 2001 and 2015, respectively. The classification of the vegetation was made through the technique of Normalized Difference Vegetation Index (NDVI. Thus, this study points that the use of some techniques and remote sensing tools, like NDVI, when used together with the field research, are extremely efficient for identifying the areas of the sugarcane cultivation.

  12. Integrated fingerprinting in secure digital cinema projection

    Delannay, Damien; Delaigle, Jean-Francois; Macq, Benoit M. M.; Quisquater, Jean-Jacques; Mas Ribes, Joan M.; Boucqueau, Jean M.; Nivart, Jean-Francois

    2001-12-01

    This paper describes the functional model of a combined conditional access and fingerprinting copyright (-or projectionright) protection system in a digital cinema framework. In the cinema industry, a large part of early movie piracy comes from copies made in the theater itself with a camera. The evolution towards digital cinema broadcast enables watermark based fingerprinting protection systems. Besides an appropriate fingerprinting technology, a number of well defined security/cryptographic tools are integrated in order to guaranty the integrity of the whole system. The requirements are two-fold: On one side, we must ensure that the media content is only accessible at exhibition time (under specific authorization obtained after an ad-hoc film rental agreement) and contains the related exhibition fingerprint. At the other end, we must prove our ability to retrieve the fingerprint information from an illegal copy of the media.

  13. MR Fingerprinting for Rapid Quantitative Abdominal Imaging.

    Chen, Yong; Jiang, Yun; Pahwa, Shivani; Ma, Dan; Lu, Lan; Twieg, Michael D; Wright, Katherine L; Seiberlich, Nicole; Griswold, Mark A; Gulani, Vikas

    2016-04-01

    To develop a magnetic resonance (MR) "fingerprinting" technique for quantitative abdominal imaging. This HIPAA-compliant study had institutional review board approval, and informed consent was obtained from all subjects. To achieve accurate quantification in the presence of marked B0 and B1 field inhomogeneities, the MR fingerprinting framework was extended by using a two-dimensional fast imaging with steady-state free precession, or FISP, acquisition and a Bloch-Siegert B1 mapping method. The accuracy of the proposed technique was validated by using agarose phantoms. Quantitative measurements were performed in eight asymptomatic subjects and in six patients with 20 focal liver lesions. A two-tailed Student t test was used to compare the T1 and T2 results in metastatic adenocarcinoma with those in surrounding liver parenchyma and healthy subjects. Phantom experiments showed good agreement with standard methods in T1 and T2 after B1 correction. In vivo studies demonstrated that quantitative T1, T2, and B1 maps can be acquired within a breath hold of approximately 19 seconds. T1 and T2 measurements were compatible with those in the literature. Representative values included the following: liver, 745 msec ± 65 (standard deviation) and 31 msec ± 6; renal medulla, 1702 msec ± 205 and 60 msec ± 21; renal cortex, 1314 msec ± 77 and 47 msec ± 10; spleen, 1232 msec ± 92 and 60 msec ± 19; skeletal muscle, 1100 msec ± 59 and 44 msec ± 9; and fat, 253 msec ± 42 and 77 msec ± 16, respectively. T1 and T2 in metastatic adenocarcinoma were 1673 msec ± 331 and 43 msec ± 13, respectively, significantly different from surrounding liver parenchyma relaxation times of 840 msec ± 113 and 28 msec ± 3 (P < .0001 and P < .01) and those in hepatic parenchyma in healthy volunteers (745 msec ± 65 and 31 msec ± 6, P < .0001 and P = .021, respectively). A rapid technique for quantitative abdominal imaging was developed that allows simultaneous quantification of multiple tissue

  14. Structural Fingerprints of Transcription Factor Binding Site Regions

    Peter Willett

    2009-03-01

    Full Text Available Fourier transforms are a powerful tool in the prediction of DNA sequence properties, such as the presence/absence of codons. We have previously compiled a database of the structural properties of all 32,896 unique DNA octamers. In this work we apply Fourier techniques to the analysis of the structural properties of human chromosomes 21 and 22 and also to three sets of transcription factor binding sites within these chromosomes. We find that, for a given structural property, the structural property power spectra of chromosomes 21 and 22 are strikingly similar. We find common peaks in their power spectra for both Sp1 and p53 transcription factor binding sites. We use the power spectra as a structural fingerprint and perform similarity searching in order to find transcription factor binding site regions. This approach provides a new strategy for searching the genome data for information. Although it is difficult to understand the relationship between specific functional properties and the set of structural parameters in our database, our structural fingerprints nevertheless provide a useful tool for searching for function information in sequence data. The power spectrum fingerprints provide a simple, fast method for comparing a set of functional sequences, in this case transcription factor binding site regions, with the sequences of whole chromosomes. On its own, the power spectrum fingerprint does not find all transcription factor binding sites in a chromosome, but the results presented here show that in combination with other approaches, this technique will improve the chances of identifying functional sequences hidden in genomic data.

  15. Efeitos de duas técnicas de incentivo respiratório na mobilidade toracoabdominal após cirurgia abdominal alta Effects of two respiratory incentive techniques on chest wall mobility after upper abdominal surgery

    Maria Elaine Trevisan

    2010-12-01

    Full Text Available A cirurgia abdominal alta está associada a um risco elevado de complicações pulmonares que podem ser reduzidas pelo uso criterioso de manobras terapêuticas visando a expansão pulmonar. O objetivo foi comparar duas técnicas de incentivo respiratório na recuperação da dinâmica toracoabdominal em pacientes submetidos à cirurgia abdominal alta. O grupo de estudo experimental foi constituído por 16 pacientes internados na Clínica Cirúrgica do Hospital Universitário de Santa Maria distribuídos aleatoriamente em dois grupos: o grupo 1 foi constituído por dez pacientes que usaram o dispositivo Voldyne e o grupo 2, por seis pacientes submetidos ao padrão ventilatório com inspiração fracionada em três tempos. A expansibilidade toracoabdominal foi avaliada por cirtometria antes da cirurgia e no 1º, 3º¸ e 5º dias do pós-operatório (PO. Observou-se redução significativa dos valores de cirtometria no 1º PO que, gradualmente, foram sendo recuperados, não mais havendo diferença significativa no 5o PO em relação aos valores pré-operatórios em ambos os grupos. O grupo 1 obteve significativamente melhores índices de recuperação da mobilidade toracoabdominal do que o grupo 2. Também o tempo de recuperação do grupo 1 atingiu médias mais elevadas durante todo o período de PO investigado. Embora ambas as técnicas utilizadas fossem efetivas, o incentivo inspiratório por meio do Voldyne mostrou melhores resultados na recuperação da expansibilidade pulmonar após cirurgia abdominal alta.Upper abdominal surgery is associated to increased risk of pulmonary complications, which may be lessened by judicious use of therapeutic maneuvers aimed at lung expansion. The purpose here was to compare two respiratory incentive techniques on recovery of thoracic-abdominal dynamics in patients having undergone upper abdominal surgery. Sixteen patients in such condition were randomly divided into group 1 (n=10, who did respiratory training

  16. Fast group matching for MR fingerprinting reconstruction.

    Cauley, Stephen F; Setsompop, Kawin; Ma, Dan; Jiang, Yun; Ye, Huihui; Adalsteinsson, Elfar; Griswold, Mark A; Wald, Lawrence L

    2015-08-01

    MR fingerprinting (MRF) is a technique for quantitative tissue mapping using pseudorandom measurements. To estimate tissue properties such as T1 , T2 , proton density, and B0 , the rapidly acquired data are compared against a large dictionary of Bloch simulations. This matching process can be a very computationally demanding portion of MRF reconstruction. We introduce a fast group matching algorithm (GRM) that exploits inherent correlation within MRF dictionaries to create highly clustered groupings of the elements. During matching, a group specific signature is first used to remove poor matching possibilities. Group principal component analysis (PCA) is used to evaluate all remaining tissue types. In vivo 3 Tesla brain data were used to validate the accuracy of our approach. For a trueFISP sequence with over 196,000 dictionary elements, 1000 MRF samples, and image matrix of 128 × 128, GRM was able to map MR parameters within 2s using standard vendor computational resources. This is an order of magnitude faster than global PCA and nearly two orders of magnitude faster than direct matching, with comparable accuracy (1-2% relative error). The proposed GRM method is a highly efficient model reduction technique for MRF matching and should enable clinically relevant reconstruction accuracy and time on standard vendor computational resources. © 2014 Wiley Periodicals, Inc.

  17. Improving Accuracy and Simplifying Training in Fingerprinting-Based Indoor Location Algorithms at Room Level

    Mario Muñoz-Organero

    2016-01-01

    Full Text Available Fingerprinting-based algorithms are popular in indoor location systems based on mobile devices. Comparing the RSSI (Received Signal Strength Indicator from different radio wave transmitters, such as Wi-Fi access points, with prerecorded fingerprints from located points (using different artificial intelligence algorithms, fingerprinting-based systems can locate unknown points with a few meters resolution. However, training the system with already located fingerprints tends to be an expensive task both in time and in resources, especially if large areas are to be considered. Moreover, the decision algorithms tend to be of high memory and CPU consuming in such cases and so does the required time for obtaining the estimated location for a new fingerprint. In this paper, we study, propose, and validate a way to select the locations for the training fingerprints which reduces the amount of required points while improving the accuracy of the algorithms when locating points at room level resolution. We present a comparison of different artificial intelligence decision algorithms and select those with better results. We do a comparison with other systems in the literature and draw conclusions about the improvements obtained in our proposal. Moreover, some techniques such as filtering nonstable access points for improving accuracy are introduced, studied, and validated.

  18. Case study of 3D fingerprints applications.

    Feng Liu

    Full Text Available Human fingers are 3D objects. More information will be provided if three dimensional (3D fingerprints are available compared with two dimensional (2D fingerprints. Thus, this paper firstly collected 3D finger point cloud data by Structured-light Illumination method. Additional features from 3D fingerprint images are then studied and extracted. The applications of these features are finally discussed. A series of experiments are conducted to demonstrate the helpfulness of 3D information to fingerprint recognition. Results show that a quick alignment can be easily implemented under the guidance of 3D finger shape feature even though this feature does not work for fingerprint recognition directly. The newly defined distinctive 3D shape ridge feature can be used for personal authentication with Equal Error Rate (EER of ~8.3%. Also, it is helpful to remove false core point. Furthermore, a promising of EER ~1.3% is realized by combining this feature with 2D features for fingerprint recognition which indicates the prospect of 3D fingerprint recognition.

  19. Infrared Spectroscopy as a Chemical Fingerprinting Tool

    Huff, Timothy L.

    2003-01-01

    Infrared (IR) spectroscopy is a powerful analytical tool in the chemical fingerprinting of materials. Any sample material that will interact with infrared light produces a spectrum and, although normally associated with organic materials, inorganic compounds may also be infrared active. The technique is rapid, reproducible and usually non-invasive to the sample. That it is non-invasive allows for additional characterization of the original material using other analytical techniques including thermal analysis and RAMAN spectroscopic techniques. With the appropriate accessories, the technique can be used to examine samples in liquid, solid or gas phase. Both aqueous and non-aqueous free-flowing solutions can be analyzed, as can viscous liquids such as heavy oils and greases. Solid samples of varying sizes and shapes may also be examined and with the addition of microscopic IR (microspectroscopy) capabilities, minute materials such as single fibers and threads may be analyzed. With the addition of appropriate software, microspectroscopy can be used for automated discrete point or compositional surface area mapping, with the latter providing a means to record changes in the chemical composition of a material surface over a defined area. Due to the ability to characterize gaseous samples, IR spectroscopy can also be coupled with thermal processes such as thermogravimetric (TG) analyses to provide both thermal and chemical data in a single run. In this configuration, solids (or liquids) heated in a TG analyzer undergo decomposition, with the evolving gases directed into the IR spectrometer. Thus, information is provided on the thermal properties of a material and the order in which its chemical constituents are broken down during incremental heating. Specific examples of these varied applications will be cited, with data interpretation and method limitations further discussed.

  20. Sediment sources in the Upper Severn catchment: a fingerprinting approach

    A. L. Collins

    1997-01-01

    Full Text Available Suspended sediment sources in the Upper Severn catchment are quantified using a composite fingerprinting technique combining statistically-verified signatures with a multivariate mixing model. Composite fingerprints are developed from a suite of diagnostic properties comprising trace metal (Fe, Mn, AI, heavy metal (Cu, Zn, Pb, Cr, Co, Ni, base cation (Na, Mg, Ca, K, organic (C, N, radiometric (137Cs, 210Pb, and other (total P determinands. A numerical mixing model, to compare the fingerprints of contemporary catchment source materials with those of fluvial suspended sediment in transit and those of recent overbank floodplain deposits, provides a means of quantifying present and past sediment sources respectively. Sources are classified in terms of eroding surface soils under different land uses and channel banks. Eroding surface soils are the most important source of the contemporary suspended sediment loads sampled at the Institute of Hydrology flow gauging stations at Plynlimon and at Abermule. The erosion of forest soils, associated with the autumn and winter commercial activities of the Forestry Commission, is particularly evident. Reconstruction of sediment provenance over the recent past using a sediment core from the active river floodpiain at Abermule, in conjunction with a 137Cs chronology, demonstrates the significance of recent phases of afforestation and deforestation for accelerated catchment soil erosion.

  1. ORIENTATION FIELD RECONSTRUCTION OF ALTERED FINGERPRINT USING ORTHOGONAL WAVELETS

    Mini M.G.

    2016-11-01

    Full Text Available Ridge orientation field is an important feature for fingerprint matching and fingerprint reconstruction. Matching of the altered fingerprint against its unaltered mates can be done by extracting the available features in the altered fingerprint and using it along with approximated ridge orientation. This paper presents a method for approximating ridge orientation field of altered fingerprints. In the proposed method, sine and cosine of doubled orientation of the fingerprint is decomposed using orthogonal wavelets and reconstructed back using only the approximation coefficients. No prior information about the singular points is needed for orientation approximation. The method is found suitable for orientation estimation of low quality fingerprint images also.

  2. Attendance fingerprint identification system using arduino and single board computer

    Muchtar, M. A.; Seniman; Arisandi, D.; Hasanah, S.

    2018-03-01

    Fingerprint is one of the most unique parts of the human body that distinguishes one person from others and is easily accessed. This uniqueness is supported by technology that can automatically identify or recognize a person called fingerprint sensor. Yet, the existing Fingerprint Sensor can only do fingerprint identification on one machine. For the mentioned reason, we need a method to be able to recognize each user in a different fingerprint sensor. The purpose of this research is to build fingerprint sensor system for fingerprint data management to be centralized so identification can be done in each Fingerprint Sensor. The result of this research shows that by using Arduino and Raspberry Pi, data processing can be centralized so that fingerprint identification can be done in each fingerprint sensor with 98.5 % success rate of centralized server recording.

  3. Internal structure of the cerebral hemispheres: an introduction of fiber dissection technique Estrutura interna dos hemisférios cerebrais: introdução à técnica de dissecação de fibras

    Igor de Castro

    2005-06-01

    Full Text Available The aim of this study is to introduce the fiber dissection technique and its importance in the comprehension of the three-dimensional intrinsic anatomy of the brain. A total of twenty brain hemispheres were dissected. Using Kingler's technique we demonstrated the intrinsic structures of the brain. The supra lateral aspect of the brain as well as the medial aspect were presented. The most important fiber systems were demonstrated. The use and comprehension of new neuroimaging techniques demand a better understanding of this fascinating anatomy. The knowledge acquired with this technique will improve our understanding of critical pathways of the central nervous system.O objetivo é mostrar a técnica de dissecação de fibras e sua importância na compreensão da anatomia tridimensional do cérebro. Um total de 20 hemisférios cerebrais foram dissecados. Usando a técnica de dissecação descrita por Kingler, pudemos demonstrar as estruturas que compõem a anatomia interna do cérebro. A anatomia da face súpero-lateral assim como da face medial foi apresentada. O uso e compreensão de novas técnicas de neuroimagem requerem um melhor conhecimento desta anatomia. O conhecimento adquirido com essa técnica contribuirá para o melhor entendimento de vias essenciais do sistema nervoso central.

  4. Microorganism Identification Based On MALDI-TOF-MS Fingerprints

    Elssner, Thomas; Kostrzewa, Markus; Maier, Thomas; Kruppa, Gary

    Advances in MALDI-TOF mass spectrometry have enabled the ­development of a rapid, accurate and specific method for the identification of bacteria directly from colonies picked from culture plates, which we have named the MALDI Biotyper. The picked colonies are placed on a target plate, a drop of matrix solution is added, and a pattern of protein molecular weights and intensities, "the protein fingerprint" of the bacteria, is produced by the MALDI-TOF mass spectrometer. The obtained protein mass fingerprint representing a molecular signature of the microorganism is then matched against a database containing a library of previously measured protein mass fingerprints, and scores for the match to every library entry are produced. An ID is obtained if a score is returned over a pre-set threshold. The sensitivity of the techniques is such that only approximately 104 bacterial cells are needed, meaning that an overnight culture is sufficient, and the results are obtained in minutes after culture. The improvement in time to result over biochemical methods, and the capability to perform a non-targeted identification of bacteria and spores, potentially makes this method suitable for use in the detect-to-treat timeframe in a bioterrorism event. In the case of white-powder samples, the infectious spore is present in sufficient quantity in the powder so that the MALDI Biotyper result can be obtained directly from the white powder, without the need for culture. While spores produce very different patterns from the vegetative colonies of the corresponding bacteria, this problem is overcome by simply including protein fingerprints of the spores in the library. Results on spores can be returned within minutes, making the method suitable for use in the "detect-to-protect" timeframe.

  5. Fingerprint re-alignment: a solution based on the true fingerprint center point

    Msiza, IS

    2011-02-01

    Full Text Available Solution Based on the True Fingerprint Center Point Ishmael S. Msiza, Brain Leke-Betechuoh, and Tendani Malumedzha Biometrics Research Group ? Information Security CSIR, Modelling & Digital Science Unit Pretoria, Republic of South Africa e... with a pattern that belongs to the Tented Arch (TA) fingerprint class. Fingerprints that belong to the TA class have a single core and a single delta, with the core located almost directly above the delta, as depicted in figure 3 (b). Many singular...

  6. Técnica para obtenção do aparelho geniturinário e dosagem do PSA (Prostate Specific Antigen no hamster sírio, Mesocricetus auratus Technique for collecting blood for PSA (Prostate Specific Antigen dosing and genitourinary system obtaining in syrian hamster, Mesocricetus auratus

    Dimas José Araújo Vidigal

    2004-12-01

    ículas seminais e testículos. Observou-se nos Hamsters adultos (n=20, setenta por cento de alterações nos anexos sexuais a saber: um caso (5% de processo supurativo das vesículas seminais, um caso (5% de processo inflamatório isolado das vesículas seminais, um caso (5% de Processo inflamatório das vesículas seminais, HBP e prostatite concomitante e um caso (5% de infarto testicular e prostatite. Onze animais (55%, dos Hamsters adultos, apresentaram HBP (Hiperplasia Benigna da Próstata. Conclusão: A técnica cirúrgica descrita mostrou-se eficiente para a obtenção dos orgãos e estruturas do aparelho geniturinário, estudo histológico desses orgãos e dosagem do PSA no Hamster Sírio, Mesocricetus auratus.Purpose: To explain the available technique in collecting blood for PSA (Prostate Specific Antigen dosing and the genitourinary system extracting from Syrian Hamster, Mesocricetus auratus, and correspond PSA findings to anexed sexual histologic changes. Methods: Thirty (n=30 Hamsters were used in the experiment: ten (n=10 animals were on the average age of 47,5 days on the decease mourent, being qualified as young and twenty ( n=20 animals over the age of one year were qualified as adults. After being under chetamina cloridate and diazepam anesthesia, on the superior abdomen level, c. 1,5mL to 2,0mL of blood were collected for total PSA dosing though ELISA method, with human antigen. They died after blood extracting. After verifying the animal death, laparatomy was carried out, extracting in complete monoblock the genitourinary system for a histologic study of sexual anexes. A PSA correlation was set with the found histologic changes. Results: An excellent anesthesian plan was obtained after shooting chetamina cloridate and diazepam intraperitoneum on the animals, that made possible to collect blood through the cava vein trans-derm via to the superior abdomen for the PSA dosing. The animal died after blood collecting. Laparatomy was carried out with the complete

  7. FINGERPRINT MATCHING BASED ON PORE CENTROIDS

    S. Malathi

    2011-05-01

    Full Text Available In recent years there has been exponential growth in the use of bio- metrics for user authentication applications. Automated Fingerprint Identification systems have become popular tool in many security and law enforcement applications. Most of these systems rely on minutiae (ridge ending and bifurcation features. With the advancement in sensor technology, high resolution fingerprint images (1000 dpi pro- vide micro level of features (pores that have proven to be useful fea- tures for identification. In this paper, we propose a new strategy for fingerprint matching based on pores by reliably extracting the pore features The extraction of pores is done by Marker Controlled Wa- tershed segmentation method and the centroids of each pore are con- sidered as feature vectors for matching of two fingerprint images. Experimental results shows that the proposed method has better per- formance with lower false rates and higher accuracy.

  8. Ferroelastic Fingerprints in Methylammonium Lead Iodide Perovskite

    Hermes, Ilka M.; Bretschneider, Simon A.; Bergmann, Victor W.; Li, Dan; Klasen, Alexander; Mars, Julian; Tremel, Wolfgang; Laquai, Fré dé ric; Butt, Hans-Jü rgen; Mezger, Markus; Berger, Rü diger; Rodriguez, Brian J.; Weber, Stefan A. L.

    2016-01-01

    sample orientations with x-ray diffraction, the preferred domain orientation was suggested to be the a1-a2-phase. The observation of these ferroelastic fingerprints appears to strongly depend on the film texture and thus the preparation route

  9. A medium resolution fingerprint matching system

    Ayman Mohammad Bahaa-Eldin

    2013-09-01

    Full Text Available In this paper, a novel minutiae based fingerprint matching system is proposed. The system is suitable for medium resolution fingerprint images obtained by low cost commercial sensors. The paper presents a new thinning algorithm, a new features extraction and representation, and a novel feature distance matching algorithm. The proposed system is rotation and translation invariant and is suitable for complete or partial fingerprint matching. The proposed algorithms are optimized to be executed on low resource environments both in CPU power and memory space. The system was evaluated using a standard fingerprint dataset and good performance and accuracy were achieved under certain image quality requirements. In addition, the proposed system was compared favorably to that of the state of the art systems.

  10. DNA fingerprinting in botany: past, present, future

    Nybom, Hilde; Weising, Kurt; Rotter, Björn

    2014-01-01

    Almost three decades ago Alec Jeffreys published his seminal Nature papers on the use of minisatellite probes for DNA fingerprinting of humans (Jeffreys and colleagues Nature 1985, 314:67–73 and Nature 1985, 316:76–79). The new technology was soon adopted for many other organisms including plants, and when Hilde Nybom, Kurt Weising and Alec Jeffreys first met at the very First International Conference on DNA Fingerprinting in Berne, Switzerland, in 1990, everybody was enthusiastic about the n...

  11. Geochronological study of the Guanabara Bay (Rio de Janeiro State, Brazil) using 2'10 Pb dating technique and the constant rate of supply model

    Silva Braganca, Maura Julia Camara da; Oliveira Godoy, Jose Marcos de

    1995-01-01

    A geochronological study of the Guanabara Bay (RJ, Brazil) based on 210 Pb dating technique using the Constant Rate of Supply Model CRS is presented. A low energy gamma spectrometry ( 210 Pb for samples collected from Estrela and Sao Joao de Meriti rivers. Radiochemical method was applied to determine the amount of 210 Pb in samples from Guapimirim, Guaxindiba and Imbuacu rivers. Atomic absorption spectrometry with air-acetylene flame technique was used to determine the amount of copper in all the samples. The CRS model showed adequate in this estuarine system. (author). 19 refs., 5 figs., 6 tabs

  12. Privacy protection schemes for fingerprint recognition systems

    Marasco, Emanuela; Cukic, Bojan

    2015-05-01

    The deployment of fingerprint recognition systems has always raised concerns related to personal privacy. A fingerprint is permanently associated with an individual and, generally, it cannot be reset if compromised in one application. Given that fingerprints are not a secret, potential misuses besides personal recognition represent privacy threats and may lead to public distrust. Privacy mechanisms control access to personal information and limit the likelihood of intrusions. In this paper, image- and feature-level schemes for privacy protection in fingerprint recognition systems are reviewed. Storing only key features of a biometric signature can reduce the likelihood of biometric data being used for unintended purposes. In biometric cryptosystems and biometric-based key release, the biometric component verifies the identity of the user, while the cryptographic key protects the communication channel. Transformation-based approaches only a transformed version of the original biometric signature is stored. Different applications can use different transforms. Matching is performed in the transformed domain which enable the preservation of low error rates. Since such templates do not reveal information about individuals, they are referred to as cancelable templates. A compromised template can be re-issued using a different transform. At image-level, de-identification schemes can remove identifiers disclosed for objectives unrelated to the original purpose, while permitting other authorized uses of personal information. Fingerprint images can be de-identified by, for example, mixing fingerprints or removing gender signature. In both cases, degradation of matching performance is minimized.

  13. Multiparametric estimation of brain hemodynamics with MR fingerprinting ASL.

    Su, Pan; Mao, Deng; Liu, Peiying; Li, Yang; Pinho, Marco C; Welch, Babu G; Lu, Hanzhang

    2017-11-01

    Assessment of brain hemodynamics without exogenous contrast agents is of increasing importance in clinical applications. This study aims to develop an MR perfusion technique that can provide noncontrast and multiparametric estimation of hemodynamic markers. We devised an arterial spin labeling (ASL) method based on the principle of MR fingerprinting (MRF), referred to as MRF-ASL. By taking advantage of the rich information contained in MRF sequence, up to seven hemodynamic parameters can be estimated concomitantly. Feasibility demonstration, flip angle optimization, comparison with Look-Locker ASL, reproducibility test, sensitivity to hypercapnia challenge, and initial clinical application in an intracranial steno-occlusive process, Moyamoya disease, were performed to evaluate this technique. Magnetic resonance fingerprinting ASL provided estimation of up to seven parameters, including B1+, tissue T 1 , cerebral blood flow (CBF), tissue bolus arrival time (BAT), pass-through arterial BAT, pass-through blood volume, and pass-through blood travel time. Coefficients of variation of the estimated parameters ranged from 0.2 to 9.6%. Hypercapnia resulted in an increase in CBF by 57.7%, and a decrease in BAT by 13.7 and 24.8% in tissue and vessels, respectively. Patients with Moyamoya disease showed diminished CBF and lengthened BAT that could not be detected with regular ASL. Magnetic resonance fingerprinting ASL is a promising technique for noncontrast, multiparametric perfusion assessment. Magn Reson Med 78:1812-1823, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

  14. Molecular characterisation of Sporothrix schenckii isolates from humans and cats involved in the sporotrichosis epidemic in Rio de Janeiro, Brazil

    Rosani Santos Reis

    2009-08-01

    Full Text Available An epidemic of sporotrichosis, a subcutaneous mycosis caused by the fungus Sporothrix schenckii, is ongoing in Rio de Janeiro, Brazil, in which cases of human infection are related to exposure to cats. In an attempt to demonstrate the zoonotic character of this epidemic using molecular methodology, we characterised by DNA-based typing methods 19 human and 25 animal S. schenckii isolates from the epidemic, as well as two control strains. To analyse the isolates, the random amplified polymorphic DNA (RAPD technique was performed using three different primers, together with DNA fingerprinting using the minisatellite derived from the wild-type phage M13 core-sequence. The analyses generated amplicons with considerable polymorphism. Although isolates exhibited high levels of genetic relatedness, they could be clustered into 5-10 genotypes. The RAPD profiles of epidemic S. schenckii isolates could be distinguished from that of the United States isolate, displaying 20% similarity to each primer and 60% when amplified with the M13 primer. DNA fingerprinting of S. schenckii isolated from the nails (42.8% and the oral cavities (66% of cats were identical to related human samples, suggesting that there is a common infection source for animals and humans in this epidemic. It is clear that cats act as a vehicle for dissemination of S. schenckii.

  15. Sediment sources in a small agricultural catchment: A composite fingerprinting approach based on the selection of potential sources

    Zhou, Huiping; Chang, Weina; Zhang, Longjiang

    2016-08-01

    Fingerprinting techniques have been widely used as a reasonable and reliable means for investigating sediment sources, especially in relatively large catchments in which there are significant differences in surface materials. However, the discrimination power of fingerprint properties for small catchments, in which the surface materials are relatively homogeneous and human interference is marked, may be affected by fragmentary or confused source information. Using fingerprinting techniques can be difficult, and there is still a need for further studies to verify the effectiveness of such techniques in these small catchments. A composite fingerprinting approach was used in this study to investigate the main sources of sediment output, as well as their relative contributions, from a small catchment (30 km2) with high levels of farming and mining activities. The impact of the selection of different potential sediment sources on the derivation of composite fingerprints and its discrimination power were also investigated by comparing the results from different combinations of potential source types. The initial source types and several samples that could cause confusion were adjusted. These adjustments improved the discrimination power of the composite fingerprints. The results showed that the composite fingerprinting approach used in this study had a discriminatory efficiency of 89.2% for different sediment sources and that the model had a mean goodness of fit of 0.90. Cultivated lands were the main sediment source. The sediment contribution of the studied cultivated lands ranged from 39.9% to 87.8%, with a mean of 76.6%, for multiple deposited sediment samples. The mean contribution of woodlands was 21.7%. Overall, the sediment contribution from mining and road areas was relatively low. The selection of potential sources is an important factor in the application of fingerprinting techniques and warrants more attention in future studies, as is the case with other

  16. An effective one-dimensional anisotropic fingerprint enhancement algorithm

    Ye, Zhendong; Xie, Mei

    2012-01-01

    Fingerprint identification is one of the most important biometric technologies. The performance of the minutiae extraction and the speed of the fingerprint verification system rely heavily on the quality of the input fingerprint images, so the enhancement of the low fingerprint is a critical and difficult step in a fingerprint verification system. In this paper we proposed an effective algorithm for fingerprint enhancement. Firstly we use normalization algorithm to reduce the variations in gray level values along ridges and valleys. Then we utilize the structure tensor approach to estimate each pixel of the fingerprint orientations. At last we propose a novel algorithm which combines the advantages of onedimensional Gabor filtering method and anisotropic method to enhance the fingerprint in recoverable region. The proposed algorithm has been evaluated on the database of Fingerprint Verification Competition 2004, and the results show that our algorithm performs within less time.

  17. Three-dimensional fingerprint recognition by using convolution neural network

    Tian, Qianyu; Gao, Nan; Zhang, Zonghua

    2018-01-01

    With the development of science and technology and the improvement of social information, fingerprint recognition technology has become a hot research direction and been widely applied in many actual fields because of its feasibility and reliability. The traditional two-dimensional (2D) fingerprint recognition method relies on matching feature points. This method is not only time-consuming, but also lost three-dimensional (3D) information of fingerprint, with the fingerprint rotation, scaling, damage and other issues, a serious decline in robustness. To solve these problems, 3D fingerprint has been used to recognize human being. Because it is a new research field, there are still lots of challenging problems in 3D fingerprint recognition. This paper presents a new 3D fingerprint recognition method by using a convolution neural network (CNN). By combining 2D fingerprint and fingerprint depth map into CNN, and then through another CNN feature fusion, the characteristics of the fusion complete 3D fingerprint recognition after classification. This method not only can preserve 3D information of fingerprints, but also solves the problem of CNN input. Moreover, the recognition process is simpler than traditional feature point matching algorithm. 3D fingerprint recognition rate by using CNN is compared with other fingerprint recognition algorithms. The experimental results show that the proposed 3D fingerprint recognition method has good recognition rate and robustness.

  18. Inspection of Buildings in Rio de Janeiro-Brazil: Proving the greater tendency of corrosion at the base of reinforced concrete columns using potential corrosion technique

    Marcelo Henrique Farias de Medeiros

    2013-01-01

    Monitoring the corrosion of steel embedded in concrete is a way to assess the degradation of civil structures. A technique used for this is the measurement of corrosion potential, which includes the use of a reference electrode, connected to a high input impedance voltmeter. There are many factors influencing the measurement of corrosion potential, such as: degree of concrete moisture content, the oxygen access, existence of micro fissures, chloride penetration, carbonation and concrete cover...

  19. Multiscale reconstruction for MR fingerprinting.

    Pierre, Eric Y; Ma, Dan; Chen, Yong; Badve, Chaitra; Griswold, Mark A

    2016-06-01

    To reduce the acquisition time needed to obtain reliable parametric maps with Magnetic Resonance Fingerprinting. An iterative-denoising algorithm is initialized by reconstructing the MRF image series at low image resolution. For subsequent iterations, the method enforces pixel-wise fidelity to the best-matching dictionary template then enforces fidelity to the acquired data at slightly higher spatial resolution. After convergence, parametric maps with desirable spatial resolution are obtained through template matching of the final image series. The proposed method was evaluated on phantom and in vivo data using the highly undersampled, variable-density spiral trajectory and compared with the original MRF method. The benefits of additional sparsity constraints were also evaluated. When available, gold standard parameter maps were used to quantify the performance of each method. The proposed approach allowed convergence to accurate parametric maps with as few as 300 time points of acquisition, as compared to 1000 in the original MRF work. Simultaneous quantification of T1, T2, proton density (PD), and B0 field variations in the brain was achieved in vivo for a 256 × 256 matrix for a total acquisition time of 10.2 s, representing a three-fold reduction in acquisition time. The proposed iterative multiscale reconstruction reliably increases MRF acquisition speed and accuracy. Magn Reson Med 75:2481-2492, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  20. Low rank magnetic resonance fingerprinting.

    Mazor, Gal; Weizman, Lior; Tal, Assaf; Eldar, Yonina C

    2016-08-01

    Magnetic Resonance Fingerprinting (MRF) is a relatively new approach that provides quantitative MRI using randomized acquisition. Extraction of physical quantitative tissue values is preformed off-line, based on acquisition with varying parameters and a dictionary generated according to the Bloch equations. MRF uses hundreds of radio frequency (RF) excitation pulses for acquisition, and therefore high under-sampling ratio in the sampling domain (k-space) is required. This under-sampling causes spatial artifacts that hamper the ability to accurately estimate the quantitative tissue values. In this work, we introduce a new approach for quantitative MRI using MRF, called Low Rank MRF. We exploit the low rank property of the temporal domain, on top of the well-known sparsity of the MRF signal in the generated dictionary domain. We present an iterative scheme that consists of a gradient step followed by a low rank projection using the singular value decomposition. Experiments on real MRI data demonstrate superior results compared to conventional implementation of compressed sensing for MRF at 15% sampling ratio.

  1. Longest Common Extensions via Fingerprinting

    Bille, Philip; Gørtz, Inge Li; Kristensen, Jesper

    2012-01-01

    query time, no extra space and no preprocessing achieves significantly better average case performance. We show a new algorithm, Fingerprint k , which for a parameter k, 1 ≤ k ≤ [log n], on a string of length n and alphabet size σ, gives O(k n1/k) query time using O(k n) space and O(k n + sort......(n,σ)) preprocessing time, where sort(n,σ) is the time it takes to sort n numbers from σ. Though this solution is asymptotically strictly worse than the asymptotically best previously known algorithms, it outperforms them in practice in average case and is almost as fast as the simple linear time algorithm. On worst....... The LCE problem can be solved in linear space with constant query time and a preprocessing of sorting complexity. There are two known approaches achieving these bounds, which use nearest common ancestors and range minimum queries, respectively. However, in practice a much simpler approach with linear...

  2. Social media fingerprints of unemployment.

    Llorente, Alejandro; Garcia-Herranz, Manuel; Cebrian, Manuel; Moro, Esteban

    2015-01-01

    Recent widespread adoption of electronic and pervasive technologies has enabled the study of human behavior at an unprecedented level, uncovering universal patterns underlying human activity, mobility, and interpersonal communication. In the present work, we investigate whether deviations from these universal patterns may reveal information about the socio-economical status of geographical regions. We quantify the extent to which deviations in diurnal rhythm, mobility patterns, and communication styles across regions relate to their unemployment incidence. For this we examine a country-scale publicly articulated social media dataset, where we quantify individual behavioral features from over 19 million geo-located messages distributed among more than 340 different Spanish economic regions, inferred by computing communities of cohesive mobility fluxes. We find that regions exhibiting more diverse mobility fluxes, earlier diurnal rhythms, and more correct grammatical styles display lower unemployment rates. As a result, we provide a simple model able to produce accurate, easily interpretable reconstruction of regional unemployment incidence from their social-media digital fingerprints alone. Our results show that cost-effective economical indicators can be built based on publicly-available social media datasets.

  3. Social media fingerprints of unemployment.

    Alejandro Llorente

    Full Text Available Recent widespread adoption of electronic and pervasive technologies has enabled the study of human behavior at an unprecedented level, uncovering universal patterns underlying human activity, mobility, and interpersonal communication. In the present work, we investigate whether deviations from these universal patterns may reveal information about the socio-economical status of geographical regions. We quantify the extent to which deviations in diurnal rhythm, mobility patterns, and communication styles across regions relate to their unemployment incidence. For this we examine a country-scale publicly articulated social media dataset, where we quantify individual behavioral features from over 19 million geo-located messages distributed among more than 340 different Spanish economic regions, inferred by computing communities of cohesive mobility fluxes. We find that regions exhibiting more diverse mobility fluxes, earlier diurnal rhythms, and more correct grammatical styles display lower unemployment rates. As a result, we provide a simple model able to produce accurate, easily interpretable reconstruction of regional unemployment incidence from their social-media digital fingerprints alone. Our results show that cost-effective economical indicators can be built based on publicly-available social media datasets.

  4. Electrical fingerprint of pipeline defects

    Mica, Isabella; Polignano, Maria Luisa; Marco, Cinzia De

    2004-01-01

    Pipeline defects are dislocations that connect the source region of the transistor with the drain region. They were widely reported to occur in CMOS, BiCMOS devices and recently in SOI technologies. They can reduce device yield either by affecting the devices functionality or by increasing the current consumption under stand-by conditions. In this work the electrical fingerprint of these dislocations is studied, its purpose is to enable us to identify these defects as the ones responsible for device failure. It is shown that the pipeline defects are responsible for a leakage current from source to drain in the transistors. This leakage has a resistive characteristic and it is lightly modulated by the body bias. It is not sensitive to temperature; vice versa the off-current of a good transistor exhibits the well-known exponential dependence on 1/T. The emission spectrum of these defects was studied and compared with the spectrum of a good transistor. The paper aims to show that the spectrum of a defective transistor is quite peculiar; it shows well defined peaks, whereas the spectrum of a good transistor under saturation conditions is characterized by a broad spectral light emission distribution. Finally the deep-level transient spectroscopy (DLTS) is tried on defective diodes

  5. Simultaneous topography and tomography of latent fingerprints using full-field swept-source optical coherence tomography

    Dubey, Satish Kumar; Singh Mehta, Dalip; Anand, Arun; Shakher, Chandra

    2008-01-01

    We demonstrate simultaneous topography and tomography of latent fingerprints using full-field swept-source optical coherence tomography (OCT). The swept-source OCT system comprises a superluminescent diode (SLD) as broad-band light source, an acousto-optic tunable filter (AOTF) as frequency tuning device, and a compact, nearly common-path interferometer. Both the amplitude and the phase map of the interference fringe signal are reconstructed. Optical sectioning of the latent fingerprint sample is obtained by selective Fourier filtering and the topography is retrieved from the phase map. Interferometry, selective filtering, low coherence and hence better resolution are some of the advantages of the proposed system over the conventional fingerprint detection techniques. The present technique is non-invasive in nature and does not require any physical or chemical processing. Therefore, the quality of the sample does not alter and hence the same fingerprint can be used for other types of forensic test. Exploitation of low-coherence interferometry for fingerprint detection itself provides an edge over other existing techniques as fingerprints can even be lifted from low-reflecting surfaces. The proposed system is very economical and compact.

  6. Chromatographic fingerprinting: An innovative approach for food 'identitation' and food authentication - A tutorial.

    Cuadros-Rodríguez, Luis; Ruiz-Samblás, Cristina; Valverde-Som, Lucia; Pérez-Castaño, Estefanía; González-Casado, Antonio

    2016-02-25

    Fingerprinting methods describe a variety of analytical methods that provide analytical signals related to the composition of foodstuffs in a non-selective way such as by collecting a spectrum or a chromatogram. Mathematical processing of the information in such fingerprints may allow the characterisation and/or authentication of foodstuffs. In this context, the particular meaning of 'fingerprinting', in conjunction with 'profiling', is different from the original meanings used in metabolomics. This fact has produced some confusion with the use of these terms in analytical papers. Researchers coming from the metabolomic field could use 'profiling' or 'fingerprinting' on a different way to researchers who are devoted to food science. The arrival of an eclectic discipline, named 'foodomics' has not been enough to allay this terminological problem, since the authors keep on using the terms with both meanings. Thus, a first goal of this tutorial is to clarify the difference between both terms. In addition, the chemical approaches for food authentication, i.e., chemical markers, component profiling and instrumental fingerprinting, have been described. A new term, designated as 'food identitation', has been introduced in order to complete the life cycle of the chemical-based food authentication process. Chromatographic fingerprinting has been explained in detail and some strategies which could be applied has been clarified and discussed. Particularly, the strategies for chromatographic signals acquisition and chromatographic data handling are unified in a single framework. Finally, an overview about the applications of chromatographic (GC and LC) fingerprints in food authentication using different chemometric techniques has been included. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. High Resolution Ultrasonic Method for 3D Fingerprint Recognizable Characteristics in Biometrics Identification

    Maev, R. Gr.; Bakulin, E. Yu.; Maeva, A.; Severin, F.

    Biometrics is a rapidly evolving scientific and applied discipline that studies possible ways of personal identification by means of unique biological characteristics. Such identification is important in various situations requiring restricted access to certain areas, information and personal data and for cases of medical emergencies. A number of automated biometric techniques have been developed, including fingerprint, hand shape, eye and facial recognition, thermographic imaging, etc. All these techniques differ in the recognizable parameters, usability, accuracy and cost. Among these, fingerprint recognition stands alone since a very large database of fingerprints has already been acquired. Also, fingerprints are key evidence left at a crime scene and can be used to indentify suspects. Therefore, of all automated biometric techniques, especially in the field of law enforcement, fingerprint identification seems to be the most promising. We introduce a newer development of the ultrasonic fingerprint imaging. The proposed method obtains a scan only once and then varies the C-scan gate position and width to visualize acoustic reflections from any appropriate depth inside the skin. Also, B-scans and A-scans can be recreated from any position using such data array, which gives the control over the visualization options. By setting the C-scan gate deeper inside the skin, distribution of the sweat pores (which are located along the ridges) can be easily visualized. This distribution should be unique for each individual so this provides a means of personal identification, which is not affected by any changes (accidental or intentional) of the fingers' surface conditions. This paper discusses different setups, acoustic parameters of the system, signal and image processing options and possible ways of 3-dimentional visualization that could be used as a recognizable characteristic in biometric identification.

  8. Novel nanoporous sorbent for solid-phase extraction in petroleum fingerprinting

    Alayande, S. Oluwagbemiga; Hlengilizwe, Nyoni; Dare, E. Olugbenga; Msagati, Titus A. M.; Akinlabi, A. Kehinde; Aiyedun, P. O.

    2016-04-01

    Sample preparation is crucial in the analysis of petroleum and its derivatives. In this study, developing affordable sorbent for petroleum fingerprinting analysis using polymer waste such expanded polystyrene was explored. The potential of electrospun expanded polystyrene (EPS) as a sorbent for the solid-phase extraction (SPE) technique was investigated, and its efficiency was compared with commercial cartridges such as alumina, silica and alumina/silica hybrid commercial for petroleum fingerprinting analysis. The chromatograms showed that the packed electrospun EPS fibre demonstrated excellent properties for SPE applications relative to the hybrid cartridges.

  9. On multi-fingerprint detection and attribution of greenhouse gas- and aerosol forced climate change

    Hegerl, G C [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Hasselmann, K [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Cubasch, U [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany); Mitchell, J F.B. [Hadley Centre for Climate Prediction and Research, Bracknell (United Kingdom). Meteorological Office; Roeckner, E [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Voss, R [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany); Waszkewitz, J [Deutsches Klimarechenzentrum (DKRZ), Hamburg (Germany)

    1996-07-01

    A multi-fingerprint analysis is applied to the detection and attribution of anthropogenic climate change. While a single fingerprint, as applied in a previous paper by Hegerl et al. (1996), is optimal for detecting a significant climate change, the simultaneous use of several fingerprints allows one to investigate additionally the consistency between observations and model predicted climate change signals for competing candidate forcing mechanisms. Thus the multi-fingerprint method is a particularly useful technique for attributing an observed climate change to a proposed cause. Different model-predicted climate change signals are derived from three global warming simulations for the period 1880 to 2049. In one simulation, the forcing was by greenhouse gases only, while in the remaining two simulations the influence of aerosols was also included. The two dominant climate change signals derived from these simulations are optimized statistically by weighting the model-predicted climate change pattern towards low-noise directions. These optimized fingerprints are then applied to observed near surface temperature trends. The space-time structure of natural climate variability (needed to determine the signal-to-noise ratio) is estimated from several multi-century control simulations with different CGCMs and from instrumental data over the last 134 years. (orig.)

  10. Magnetic Resonance Fingerprinting - a promising new approach to obtain standardized imaging biomarkers from MRI.

    2015-04-01

    Current routine MRI examinations rely on the acquisition of qualitative images that have a contrast "weighted" for a mixture of (magnetic) tissue properties. Recently, a novel approach was introduced, namely MR Fingerprinting (MRF) with a completely different approach to data acquisition, post-processing and visualization. Instead of using a repeated, serial acquisition of data for the characterization of individual parameters of interest, MRF uses a pseudo randomized acquisition that causes the signals from different tissues to have a unique signal evolution or 'fingerprint' that is simultaneously a function of the multiple material properties under investigation. The processing after acquisition involves a pattern recognition algorithm to match the fingerprints to a predefined dictionary of predicted signal evolutions. These can then be translated into quantitative maps of the magnetic parameters of interest. MR Fingerprinting (MRF) is a technique that could theoretically be applied to most traditional qualitative MRI methods and replaces them with acquisition of truly quantitative tissue measures. MRF is, thereby, expected to be much more accurate and reproducible than traditional MRI and should improve multi-center studies and significantly reduce reader bias when diagnostic imaging is performed. Key Points • MR fingerprinting (MRF) is a new approach to data acquisition, post-processing and visualization.• MRF provides highly accurate quantitative maps of T1, T2, proton density, diffusion.• MRF may offer multiparametric imaging with high reproducibility, and high potential for multicenter/ multivendor studies.

  11. Evaluation of three methods for DNA fingerprinting of Corynebacterium pseudotuberculosis strains isolated from goats in Poland.

    Stefańska, Ilona; Rzewuska, Magdalena; Binek, Marian

    2008-01-01

    Phenotypic approaches based on metabolic and biological characteristics of Corynebacterium pseudotuberculosis have been limited due to insufficient discrimination between closely related isolates. In this paper we present performance and convenience of three molecular typing methods: BOX-PCR, random amplification of polymorphic DNA (RAPD) and amplification of DNA fragments surrounding rare restriction site (ADSRRS-fingerprinting) in genome analysis of these bacteria. Among examined 61 strains there were distinguished four, eight and 10 different genotypes by BOX-PCR, RAPD and ADSRRS-fingerprinting, respectively. The value of discrimination index was the lowest for BOX-PCR (D = 0.265), much bigger for RAPD (D = 0.539) and the highest for ADSRRS-fingerprinting (D = 0.604). The good discriminatory ability and reproducibility of RAPD and ADSRRS-fingerprinting indicates that those techniques may be particularly applied for epidemiological studies of C. pseudotuberculosis isolates. We found that ADSRRS-fingerprinting is a rapid method offering good discrimination power, excellent reproducibility and may be applied for epidemiological studies of intraspecific genetic relatedness of C. pseudotuberculosis strains.

  12. Examination of Speed Contribution of Parallelization for Several Fingerprint Pre-Processing Algorithms

    GORGUNOGLU, S.

    2014-05-01

    Full Text Available In analysis of minutiae based fingerprint systems, fingerprints needs to be pre-processed. The pre-processing is carried out to enhance the quality of the fingerprint and to obtain more accurate minutiae points. Reducing the pre-processing time is important for identification and verification in real time systems and especially for databases holding large fingerprints information. Parallel processing and parallel CPU computing can be considered as distribution of processes over multi core processor. This is done by using parallel programming techniques. Reducing the execution time is the main objective in parallel processing. In this study, pre-processing of minutiae based fingerprint system is implemented by parallel processing on multi core computers using OpenMP and on graphics processor using CUDA to improve execution time. The execution times and speedup ratios are compared with the one that of single core processor. The results show that by using parallel processing, execution time is substantially improved. The improvement ratios obtained for different pre-processing algorithms allowed us to make suggestions on the more suitable approaches for parallelization.

  13. Lead (Pb) isotopic fingerprinting and its applications in lead pollution studies in China: A review

    Cheng Hefa; Hu Yuanan

    2010-01-01

    As the most widely scattered toxic metal in the world, the sources of lead (Pb) observed in contamination investigation are often difficult to identify. This review presents an overview of the principles, analysis, and applications of Pb isotopic fingerprinting in tracing the origins and transport pathways of Pb in the environment. It also summarizes the history and current status of lead pollution in China, and illustrates the power of Pb isotopic fingerprinting with examples of its recent applications in investigating the effectiveness of leaded gasoline phase-out on atmospheric lead pollution, and the sources of Pb found in various environmental media (plants, sediments, and aquatic organisms) in China. The limitations of Pb isotopic fingerprinting technique are discussed and a perspective on its development is also presented. Further methodological developments and more widespread instrument availability are expected to make isotopic fingerprinting one of the key tools in lead pollution investigation. - This review presents an overview of the principles, applications, and limitations of Pb isotopic fingerprinting in lead pollution investigation, and provides a perspective on its future development.

  14. High perfomance liquid chromatography fingerprint analysis for quality control of brotowali (Tinospora crispa)

    Syarifah, V. B.; Rafi, M.; Wahyuni, W. T.

    2017-05-01

    Brotowali (Tinospora crispa) is widely used in Indonesia as ingredient of herbal medicine formulation. To ensure the quality, safety, and efficacy of herbal medicine products, its chemical constituents should be continuously evaluated. High performance liquid chromatography (HPLC) fingerprint is one of powerful technique for this quality control process. In this study, HPLC fingerprint analysis method was developed for quality control of brotowali. HPLC analysis was performed in C18 column and detection was performed using photodiode array detector. The optimum mobile phase for brotowali fingerprint was acetonitrile (ACN) and 0.1% formic acid in gradient elution mode at a flow rate of 1 mL/min. The number of peaks detected in HPLC fingerprint of brotowali was 32 peaks and 23 peaks for stems and leaves, respectively. Berberine as marker compound was detected at retention time of 20.525 minutes. Evaluation of analytical performance including precision, reproducibility, and stability prove that this HPLC fingerprint analysis was reliable and could be applied for quality control of brotowali.

  15. Latent fingerprints on different type of screen protective films

    Yuttana Sudjaroen

    2016-07-01

    Full Text Available The purpose of this research was to study the quality of latent fingerprint on different types of screen protective films including screen protector, matte screen protector, anti-fingerprint clear screen protector and anti-fingerprint matte screen protector by using black powder method in developing latent fingerprints. The fingerprints were performed by 10 volunteers whose fingers (right index, right thumb, left index and left thumb were stubbing at different types of screen protective films and subsequently latent fingerprints were developed by brushing with black powder. Automated Fingerprint Identification System (AFIS counted the numbers of minutiae points from 320 latent fingerprints. Anti-fingerprint matte screen protective film produced the best quality of latent fingerprint with an average minutiae point 72.65, followed by matte screen protective film, clear screen protective film and anti-fingerprint clear screen protective film with an average minutiae point of 155.2, 135.0 and 72.65 respectively. The quality of latent fingerprints developed between a clear and a matte surface of screen protective films showed a significant difference (sig>0.05, whereas the coat and the non-coat with anti-fingerprint chemical revealed a non-significant difference (sig<0.05 in their number of minutiae points.

  16. Near-Optimal Fingerprinting with Constraints

    Gulyás Gábor György

    2016-10-01

    Full Text Available Several recent studies have demonstrated that people show large behavioural uniqueness. This has serious privacy implications as most individuals become increasingly re-identifiable in large datasets or can be tracked, while they are browsing the web, using only a couple of their attributes, called as their fingerprints. Often, the success of these attacks depends on explicit constraints on the number of attributes learnable about individuals, i.e., the size of their fingerprints. These constraints can be budget as well as technical constraints imposed by the data holder. For instance, Apple restricts the number of applications that can be called by another application on iOS in order to mitigate the potential privacy threats of leaking the list of installed applications on a device. In this work, we address the problem of identifying the attributes (e.g., smartphone applications that can serve as a fingerprint of users given constraints on the size of the fingerprint. We give the best fingerprinting algorithms in general, and evaluate their effectiveness on several real-world datasets. Our results show that current privacy guards limiting the number of attributes that can be queried about individuals is insufficient to mitigate their potential privacy risks in many practical cases.

  17. Efficient Filtering of Noisy Fingerprint Images

    Maria Liliana Costin

    2016-01-01

    Full Text Available Fingerprint identification is an important field in the wide domain of biometrics with many applications, in different areas such: judicial, mobile phones, access systems, airports. There are many elaborated algorithms for fingerprint identification, but none of them can guarantee that the results of identification are always 100 % accurate. A first step in a fingerprint image analysing process consists in the pre-processing or filtering. If the result after this step is not by a good quality the upcoming identification process can fail. A major difficulty can appear in case of fingerprint identification if the images that should be identified from a fingerprint image database are noisy with different type of noise. The objectives of the paper are: the successful completion of the noisy digital image filtering, a novel more robust algorithm of identifying the best filtering algorithm and the classification and ranking of the images. The choice about the best filtered images of a set of 9 algorithms is made with a dual method of fuzzy and aggregation model. We are proposing through this paper a set of 9 filters with different novelty designed for processing the digital images using the following methods: quartiles, medians, average, thresholds and histogram equalization, applied all over the image or locally on small areas. Finally the statistics reveal the classification and ranking of the best algorithms.

  18. Cancelable remote quantum fingerprint templates protection scheme

    Liao Qin; Guo Ying; Huang Duan

    2017-01-01

    With the increasing popularity of fingerprint identification technology, its security and privacy have been paid much attention. Only the security and privacy of biological information are insured, the biological technology can be better accepted and used by the public. In this paper, we propose a novel quantum bit (qbit)-based scheme to solve the security and privacy problem existing in the traditional fingerprint identification system. By exploiting the properties of quantm mechanics, our proposed scheme, cancelable remote quantum fingerprint templates protection scheme, can achieve the unconditional security guaranteed in an information-theoretical sense. Moreover, this novel quantum scheme can invalidate most of the attacks aimed at the fingerprint identification system. In addition, the proposed scheme is applicable to the requirement of remote communication with no need to worry about its security and privacy during the transmission. This is an absolute advantage when comparing with other traditional methods. Security analysis shows that the proposed scheme can effectively ensure the communication security and the privacy of users’ information for the fingerprint identification. (paper)

  19. Impact of Finger Type in Fingerprint Authentication

    Gafurov, Davrondzhon; Bours, Patrick; Yang, Bian; Busch, Christoph

    Nowadays fingerprint verification system is the most widespread and accepted biometric technology that explores various features of the human fingers for this purpose. In general, every normal person has 10 fingers with different size. Although it is claimed that recognition performance with little fingers can be less accurate compared to other finger types, to our best knowledge, this has not been investigated yet. This paper presents our study on the topic of influence of the finger type into fingerprint recognition performance. For analysis we employ two fingerprint verification software packages (one public and one commercial). We conduct test on GUC100 multi sensor fingerprint database which contains fingerprint images of all 10 fingers from 100 subjects. Our analysis indeed confirms that performance with small fingers is less accurate than performance with the others fingers of the hand. It also appears that best performance is being obtained with thumb or index fingers. For example, performance deterioration from the best finger (i.e. index or thumb) to the worst fingers (i.e. small ones) can be in the range of 184%-1352%.

  20. Partial fingerprint identification algorithm based on the modified generalized Hough transform on mobile device

    Qin, Jin; Tang, Siqi; Han, Congying; Guo, Tiande

    2018-04-01

    Partial fingerprint identification technology which is mainly used in device with small sensor area like cellphone, U disk and computer, has taken more attention in recent years with its unique advantages. However, owing to the lack of sufficient minutiae points, the conventional method do not perform well in the above situation. We propose a new fingerprint matching technique which utilizes ridges as features to deal with partial fingerprint images and combines the modified generalized Hough transform and scoring strategy based on machine learning. The algorithm can effectively meet the real-time and space-saving requirements of the resource constrained devices. Experiments on in-house database indicate that the proposed algorithm have an excellent performance.

  1. High-speed biometrics ultrasonic system for 3D fingerprint imaging

    Maev, Roman G.; Severin, Fedar

    2012-10-01

    The objective of this research is to develop a new robust fingerprint identification technology based upon forming surface-subsurface (under skin) ultrasonic 3D images of the finger pads. The presented work aims to create specialized ultrasonic scanning methods for biometric purposes. Preliminary research has demonstrated the applicability of acoustic microscopy for fingerprint reading. The additional information from internal skin layers and dermis structures contained in the scan can essentially improve confidence in the identification. Advantages of this system include high resolution and quick scanning time. Operating in pulse-echo mode provides spatial resolution up to 0.05 mm. Technology advantages of the proposed technology are the following: • Full-range scanning of the fingerprint area "nail to nail" (2.5 x 2.5 cm) can be done in less than 5 sec with a resolution of up to 1000 dpi. • Collection of information about the in-depth structure of the fingerprint realized by the set of spherically focused 50 MHz acoustic lens provide the resolution ~ 0.05 mm or better • In addition to fingerprints, this technology can identify sweat porous at the surface and under the skin • No sensitivity to the contamination of the finger's surface • Detection of blood velocity using Doppler effect can be implemented to distinguish living specimens • Utilization as polygraph device • Simple connectivity to fingerprint databases obtained with other techniques • The digitally interpolated images can then be enhanced allowing for greater resolution • Method can be applied to fingernails and underlying tissues, providing more information • A laboratory prototype of the biometrics system based on these described principles was designed, built and tested. It is the first step toward a practical implementation of this technique.

  2. Nucleation Techniques as a Strategy for Recovery and Environmental Valuation of Degraded Areas Located in Alto Rio São Lourenço, Campo Verde-MT

    Renata Freitag Daltro

    2013-12-01

    Full Text Available Our aim was to assess the effectiveness of different techniques that comprise the recovery plan of degraded area (RPDA in one of the headwaters of São Lourenço River, Campo Verde-MT, by monitoring the early stage of plant regeneration of permanent preservation degraded areas, according to the Federal Law 4.771/65 and its updates. The experimental area was divided into five treatments, for the planting of native plants, fruit, legumes, green manure and muvuca seed, based on the precepts of nucleation. For each treatment there was a random selection of three installments, measuring 81m2, totaling 12 plots. The planting, the identification and the characterization of indicators of vegetation regeneration site were monitored in these plots. The indicators found at the site were: flowers, fruits and seeds of revegetated species; traces and presence of wildlife; litter production and soil cover, and formation of microclimates, with increasing relative humidity and decreased atmospheric temperature.

  3. Solving the Mystery of Fading Fingerprints with London Dispersion Forces.

    Kimbrough, Doris R.; DeLorenzo, Ronald

    1998-01-01

    Focuses on the kidnapping of a child whose fingerprints were not found inside the crime vehicle. Discusses the investigation that followed and led to knowledge of the differences between the fingerprints of children and adults. (DDR)

  4. Fingerprinting Mobile Devices Using Personalized Configurations

    Kurtz Andreas

    2016-01-01

    Full Text Available Recently, Apple removed access to various device hardware identifiers that were frequently misused by iOS third-party apps to track users. We are, therefore, now studying the extent to which users of smartphones can still be uniquely identified simply through their personalized device configurations. Using Apple’s iOS as an example, we show how a device fingerprint can be computed using 29 different configuration features. These features can be queried from arbitrary thirdparty apps via the official SDK. Experimental evaluations based on almost 13,000 fingerprints from approximately 8,000 different real-world devices show that (1 all fingerprints are unique and distinguishable; and (2 utilizing a supervised learning approach allows returning users or their devices to be recognized with a total accuracy of 97% over time

  5. Comparing Categorical and Probabilistic Fingerprint Evidence.

    Garrett, Brandon; Mitchell, Gregory; Scurich, Nicholas

    2018-04-23

    Fingerprint examiners traditionally express conclusions in categorical terms, opining that impressions do or do not originate from the same source. Recently, probabilistic conclusions have been proposed, with examiners estimating the probability of a match between recovered and known prints. This study presented a nationally representative sample of jury-eligible adults with a hypothetical robbery case in which an examiner opined on the likelihood that a defendant's fingerprints matched latent fingerprints in categorical or probabilistic terms. We studied model language developed by the U.S. Defense Forensic Science Center to summarize results of statistical analysis of the similarity between prints. Participant ratings of the likelihood the defendant left prints at the crime scene and committed the crime were similar when exposed to categorical and strong probabilistic match evidence. Participants reduced these likelihoods when exposed to the weaker probabilistic evidence, but did not otherwise discriminate among the prints assigned different match probabilities. © 2018 American Academy of Forensic Sciences.

  6. Use of radiometric (Cs-137, Pb-210), geomorphic, and stratigraphic techniques to date recent oxbow sediments in the Rio Puerco drainage Grants uranium region, New Mexico

    Popp, C.J.; Dehn, M. (New Mexico Inst. of Mining and Tech., Socorro (United States)); Hawley, J.W.; Love, D.W. (New Mexico Bureau of Mines and Mineral Resources, Socorro (United States))

    1988-06-01

    In the absence of historic geochemical baseline data for the Grants uranium region, environmental changes resulting from uranium mine-mill activities can be determined only by indirect methods. A methodology for determining the age of recent sediments in streams draining the region has been established based on combined geomorphic, stratigraphic, and radiometric dating techniques. Because clay-rich sediments retain possible radionuclides and heavy metals derived from mineralization and mined sources, sample sites which contain fine-grained deposits that both predate and postdate mine-mill activity were located in abandoned-channel segments (oxbows) of major streams draining the eastern Grants uranium region. Aerial photographs (and derivative maps) taken between 1935 and 1971 provided the historical and geomorphic documentation of approximate dates of oxbow formation and ages of alluvial fills in the abandoned-channel segments. Pits were dug at these oxbow sites to determine stratigraphy and composition of the deposits. Samples collected from pit walls and auger holes below the pits were subjected to radiometric analysis by gamma ray spectrometry for the artificial radionuclide Cs-137 and the natural radionuclide Pb-210 as well as other U-238 and Th-232 daughters. Because of the dynamic nature of the system, absolute dating with Cs-137 was not possible but samples could be dated as either pre- or post-1950. The 1950 date is important because it marked the beginning of the uranium exploitation in the region. The Pb-210 dating was not possible because background Pb-210 was very high relative to fallout Pb-210.

  7. Diversity of DNA fingerprints in Cryptococcus neoformans.

    Varma, A; Swinne, D; Staib, F; Bennett, J E; Kwon-Chung, K J

    1995-07-01

    DNA fingerprint patterns of 156 Cryptococcus neoformans isolates (26 AIDS patients, 46 non-AIDS patients, and 40 environmental sources) from both varieties (126 C. neoformans var. neoformans and 30 C. neoformans var. gattii isolates) and from seven countries were analyzed by using the DNA probe UT-4p. Nine and twelve distinct DNA fingerprint patterns were observed for isolates of the C. neoformans var. neoformans and var. gattii, respectively. No pattern was unique to AIDS patients, non-AIDS patients, or the environment. Pattern II was observed more often in non-AIDS patients (8 of 23) than in AIDS patients (0 of 25). Pattern V was the most prevalent pattern (42 of 82) in clinical and environmental isolates. Isolates from three AIDS patients in Burundi and Zaire exhibited patterns identical to each other but different from those of isolates collected from their houses (i.e., dust of floors, walls, etc.) or a nearby pigeon coop. DNA fingerprint stability was determined for 53 isolates from nine non-AIDS patients at different time intervals during 5 to 128 weeks of antifungal therapy. For eight patients, the fingerprint pattern was stable while the ninth may have had a mixed infection. Pattern II was observed in 4 of 9 patients, which is similar to 4 of 14 in other non-AIDS patients as reported here. In spite of the extensive pattern heterogeneity among 15 C. neoformans var. gattii isolates in Australia, the patterns observed in seven California isolates were quite different from those in Australia. Among isolates of C. neoformans var. gattii, one fingerprint pattern (designated b) was observed in several countries of the Far East. The fingerprint patterns of two of three environmental isolates from Eucalyptus camaldulensis trees in Australia were identical to those of 2 of the 12 clinical isolates from the country.

  8. Fingerprint enhancement using a multispectral sensor

    Rowe, Robert K.; Nixon, Kristin A.

    2005-03-01

    The level of performance of a biometric fingerprint sensor is critically dependent on the quality of the fingerprint images. One of the most common types of optical fingerprint sensors relies on the phenomenon of total internal reflectance (TIR) to generate an image. Under ideal conditions, a TIR fingerprint sensor can produce high-contrast fingerprint images with excellent feature definition. However, images produced by the same sensor under conditions that include dry skin, dirt on the skin, and marginal contact between the finger and the sensor, are likely to be severely degraded. This paper discusses the use of multispectral sensing as a means to collect additional images with new information about the fingerprint that can significantly augment the system performance under both normal and adverse sample conditions. In the context of this paper, "multispectral sensing" is used to broadly denote a collection of images taken under different illumination conditions: different polarizations, different illumination/detection configurations, as well as different wavelength illumination. Results from three small studies using an early-stage prototype of the multispectral-TIR (MTIR) sensor are presented along with results from the corresponding TIR data. The first experiment produced data from 9 people, 4 fingers from each person and 3 measurements per finger under "normal" conditions. The second experiment provided results from a study performed to test the relative performance of TIR and MTIR images when taken under extreme dry and dirty conditions. The third experiment examined the case where the area of contact between the finger and sensor is greatly reduced.

  9. Interoperability between Fingerprint Biometric Systems: An Empirical Study

    Gashi, I.; Mason, S.; Lugini, L.; Marasco, E.; Cukic, B.

    2014-01-01

    Fingerprints are likely the most widely used biometric in commercial as well as law enforcement applications. With the expected rapid growth of fingerprint authentication in mobile devices their importance justifies increased demands for dependability. An increasing number of new sensors,applications and a diverse user population also intensify concerns about the interoperability in fingerprint authentication. In most applications, fingerprints captured for user enrollment with one device may...

  10. DNA fingerprinting in forensics: past, present, future.

    Roewer, Lutz

    2013-11-18

    DNA fingerprinting, one of the great discoveries of the late 20th century, has revolutionized forensic investigations. This review briefly recapitulates 30 years of progress in forensic DNA analysis which helps to convict criminals, exonerate the wrongly accused, and identify victims of crime, disasters, and war. Current standard methods based on short tandem repeats (STRs) as well as lineage markers (Y chromosome, mitochondrial DNA) are covered and applications are illustrated by casework examples. Benefits and risks of expanding forensic DNA databases are discussed and we ask what the future holds for forensic DNA fingerprinting.

  11. Image Processing and Features Extraction of Fingerprint Images ...

    To demonstrate the importance of the image processing of fingerprint images prior to image enrolment or comparison, the set of fingerprint images in databases (a) and (b) of the FVC (Fingerprint Verification Competition) 2000 database were analyzed using a features extraction algorithm. This paper presents the results of ...

  12. 8 CFR 1236.5 - Fingerprints and photographs.

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Fingerprints and photographs. 1236.5... ORDERED REMOVED Detention of Aliens Prior to Order of Removal § 1236.5 Fingerprints and photographs. Every... photographed. Such fingerprints and photographs shall be made available to Federal, State, and local law...

  13. Screen Fingerprints as a Novel Modality for Active Authentication

    2014-03-01

    Screen fingerprint is the new cyber biometric modality that we have proposed to measure and analyze active authentication. The screen finger ...as a new biometric modality for active authentication. Such a fingerprint is acquired by taking a screen recording of the computer being used and...extracting discriminative visual feature from the recording. 15. SUBJECT TERMS Active authentication, screen fingerprints, biometrics 16. SECURITY

  14. An investigation on the problem of thinning in fingerprint processing ...

    A high-integrity thinning procedure for binarised fingerprints is proposed in this paper. Several authors and software developers have approached the thinning problems in fingerprint-processing differently. Their approach produced in most cases, fingerprint skeletons with low reli abi lity and thus require additional ...

  15. [Development of Tianma HPLC fingerprint and discriminant analysis].

    Xiao, Jia-Jia; Huang, Hong; Lei, You-Cheng; Lin, Ting-Wen; Ma, Yue; Zhang, Jing; Zhang, Xing-Guo; Zhang, Da-Quan; Lv, Guang-Hua

    2017-07-01

    Tianma(the tuber of Gastrodia eleta) is a widely used and pricy Chinese herb. Its counterfeits are often found in herbal markets, which are the plant materials with similar macroscopic characteristics of Tianma. Moreover, the prices of Winter Tianma(cultivated Tianma) and Spring Tianma(mostly wild Tianma) have significant difference. However, it is difficult to identify the true or false, good or bad quality of Tianma samples. Thus, a total of 48 Tianma samples with different characteristics(including Winter Tianma, Spring Tianma, slice, powder, etc.) and 9 plant species 10 samples of Tianma counterfeits were collected and analyzed by HPLC-DAD-MS techniques. After optimizing the procedure of sample preparation, chromatographic and mass-spectral conditions, the HPLC chromatograms of all those samples were collected and compared. The similarities and Fisher discriminant analysis were further conducted between the HPLC chromatograms of Tianma and counterfeit, Winter Tianma and Spring Tianma. The results showed the HPLC chromatograms of 48 Tianma samples were similar at the correlation coefficient more than 0.848(n=48). Their mean chromatogram was simulated and used as Tianma HPLC fingerprint. There were 11 common peaks on the HPLC chromatograms of Tianma, in which 6 main peaks were chosen as characteristic peaks and identified as gastrodin, p-hydroxybenzyl alcohol, parishin A, parishin B, parishin C, parishin E, respectively by comparison of the retention time, UV and MS data with those of standard chemical compounds. All the six chemical compounds are bioactive in Tianma. However, the HPLC chromatograms of the 10 counterfeit samples were significantly different from Tianma fingerprint. The correlation coefficients between HPLC fingerprints of Tianma with the HPLC chromatograms of counterfeits were less than 0.042 and the characteristic peaks were not observed on the HPLC chromatograms of these counterfeit samples. It indicated the true or false Tianma can be

  16. Fingerprinting 802.11 Devices

    Ellch, Jonathan P

    2006-01-01

    The research presented in this thesis provides the reader with a set of algorithms and techniques that enable the user to remotely determine what chipset and device driver an 802.11 device is using...

  17. Indoor Location Fingerprinting with Heterogeneous Clients

    Kjærgaard, Mikkel Baun

    2011-01-01

    Heterogeneous wireless clients measure signal strength differently. This is a fundamental problem for indoor location fingerprinting, and it has a high impact on the positioning accuracy. Mapping-based solutions have been presented that require manual and error-prone calibration for each new clie...

  18. Pseudo Identities Based on Fingerprint Characteristics

    Delvaux, Nicolas; Chabanne, Herve; Bringer, Julien; Kindarji, Bruno; Lindeberg, Patrik; Midgren, Johannes; Breebaart, Jeroen; Akkermans, Ton; van der Veen, M.; Veldhuis, Raymond N.J.; Kindt, Els; Simoens, Koen; Busch, Christoph; Bours, Patrick; Gafurov, Davrondzhon; Yang, Bian; Stern, Julien; Rust, Carsten; Cucinelli, Bruno; Skepastianos, Dimitrios

    2008-01-01

    This paper presents the integrated project TURBINE which is funded under the EU 7th research framework programme. This research is a multi-disciplinary effort on privacy enhancing technology, combining innovative developments in cryptography and fingerprint recognition. The objective of this project

  19. Forensic use of fingermarks and fingerprints

    Meuwly, Didier; Li, Stan Z.; Jain, Anil K.

    2014-01-01

    The aim of this entry is to describe and explain the main forensic uses of fingermarks and fingerprints. It defines the concepts and provides the nomenclature related to forensic dactyloscopy. It describes the structure of the papillary ridges, the organization of the information in three levels,

  20. Genetic fingerprinting and phylogenetic diversity of Staphylococcus ...

    Genetic fingerprinting of 18 different isolates of Staphylococcus aureus from Nigeria using random amplified polymorphic DNA (RAPD) was carried out. Ten out of 100 Operon primers showed polymorphism among the isolates tested generating 88 bands, 51 of which were polymorphic with sizes ranging between 200 and ...

  1. Development of spectrophotometric fingerprinting method for ...

    Selective and efficient analytical methods are required not only for quality assurance but also for authentication of herbal formulations. A simple, rapid and validated fingerprint method has developed for estimation of piperine in 'Talisadi churna', a well known herbal formulation in India. The estimation was carried out in two ...

  2. Geochemical fingerprints and pebbles zircon geochronology

    Home; Journals; Journal of Earth System Science; Volume 125; Issue 7. Geochemical fingerprints and pebbles zircon geochronology: Implications for the provenance and tectonic setting of Lower Cretaceous sediments in the Zhucheng Basin (Jiaodong peninsula, North China). Jin-Long Ni Jun-Lai Liu Xiao-Ling Tang ...

  3. Protein identification by peptide mass fingerprinting

    Hjernø, Karin

    2007-01-01

      Peptide mass fingerprinting is an effective way of identifying, e.g., gel-separated proteins, by matching experimentally obtained peptide mass data against large databases. However, several factors are known to influence the quality of the resulting matches, such as proteins contaminating the s...

  4. Indoor Localization Accuracy Estimation from Fingerprint Data

    Nikitin, Artyom; Laoudias, Christos; Chatzimilioudis, Georgios

    2017-01-01

    on arbitrary FMs coined ACCES. Our framework comprises a generic interpolation method using Gaussian Processes (GP), upon which a navigability score at any location is derived using the Cramer-Rao Lower Bound (CRLB). Our approach does not rely on the underlying physical model of the fingerprint data. Our...

  5. Characterization of Actinomyces with genomic DNA fingerprints and rRNA gene probes.

    Bowden, G; Johnson, J; Schachtele, C

    1993-08-01

    Cellular DNA from 25 Actinomyces naeslundii and Actinomyces viscosus strains belonging to the 7 taxonomic clusters of Fillery et al. (1978) and several unclustered strains was obtained by enzymatic and N-lauroylsarcosine/guanidine isothiocyanate treatment of whole cells, followed by extraction of the nucleic acid. The DNA samples were digested with restriction endonucleases BamHI or PvuII, and agarose gel electrophoresis was used to obtain DNA fingerprints. The DNA fragments were subjected to Southern blot hybridization with a digoxigenin-labeled cDNA probe transcribed from Escherichia coli 16S and 23S rRNA. The patterns of bands from genomic (DNA fingerprints) and rDNA fingerprints (ribotypes) were used for comparison between the taxonomic cluster strains and strains within clusters. Representative strains from each taxonomic cluster provided different BamHI DNA fingerprints and ribotype patterns with 3 to 9 distinct bands. Some strains within a cluster showed identical ribotype patterns with both endonucleases (A. naeslundii B120 and A. naeslundii B102 from cluster 3), while others showed the same pattern with BamHI but a different pattern with PvuII (A. naeslundii ATCC 12104 and 398A from cluster 5). A viscosus ATCC 15987 (cluster 7) and its parent strain T6 yielded identical fingerprint and ribotype patterns. The genomic diversity revealed by DNA fingerprinting and ribotyping demonstrates that these techniques, which do not require phenotypic expression, are suited for study of the oral ecology of the Actinomyces, and for epidemiological tracking of specific Actinomyces strains associated with caries lesions and sites of periodontal destruction.

  6. Acquiring a 2D rolled equivalent fingerprint image from a non-contact 3D finger scan

    Fatehpuria, Abhishika; Lau, Daniel L.; Hassebrook, Laurence G.

    2006-04-01

    The use of fingerprints as a biometric is both the oldest mode of computer aided personal identification and the most relied-upon technology in use today. But current fingerprint scanning systems have some challenging and peculiar difficulties. Often skin conditions and imperfect acquisition circumstances cause the captured fingerprint image to be far from ideal. Also some of the acquisition techniques can be slow and cumbersome to use and may not provide the complete information required for reliable feature extraction and fingerprint matching. Most of the difficulties arise due to the contact of the fingerprint surface with the sensor platen. To attain a fast-capture, non-contact, fingerprint scanning technology, we are developing a scanning system that employs structured light illumination as a means for acquiring a 3-D scan of the finger with sufficiently high resolution to record ridge-level details. In this paper, we describe the postprocessing steps used for converting the acquired 3-D scan of the subject's finger into a 2-D rolled equivalent image.

  7. Fingerprint and Face Identification for Large User Population

    Teddy Ko

    2003-06-01

    Full Text Available The main objective of this paper is to present the state-of-the-art of the current biometric (fingerprint and face technology, lessons learned during the investigative analysis performed to ascertain the benefits of using combined fingerprint and facial technologies, and recommendations for the use of current available fingerprint and face identification technologies for optimum identification performance for applications using large user population. Prior fingerprint and face identification test study results have shown that their identification accuracies are strongly dependent on the image quality of the biometric inputs. Recommended methodologies for ensuring the capture of acceptable quality fingerprint and facial images of subjects are also presented in this paper.

  8. HPLC fingerprint analysis combined with chemometrics for pattern recognition of ginger.

    Feng, Xu; Kong, Weijun; Wei, Jianhe; Ou-Yang, Zhen; Yang, Meihua

    2014-03-01

    Ginger, the fresh rhizome of Zingiber officinale Rosc. (Zingiberaceae), has been used worldwide; however, for a long time, there has been no standard approbated internationally for its quality control. To establish an efficacious and combinational method and pattern recognition technique for quality control of ginger. A simple, accurate and reliable method based on high-performance liquid chromatography with photodiode array (HPLC-PDA) detection was developed for establishing the chemical fingerprints of 10 batches of ginger from different markets in China. The method was validated in terms of precision, reproducibility and stability; and the relative standard deviations were all less than 1.57%. On the basis of this method, the fingerprints of 10 batches of ginger samples were obtained, which showed 16 common peaks. Coupled with similarity evaluation software, the similarities between each fingerprint of the sample and the simulative mean chromatogram were in the range of 0.998-1.000. Then, the chemometric techniques, including similarity analysis, hierarchical clustering analysis and principal component analysis were applied to classify the ginger samples. Consistent results were obtained to show that ginger samples could be successfully classified into two groups. This study revealed that HPLC-PDA method was simple, sensitive and reliable for fingerprint analysis, and moreover, for pattern recognition and quality control of ginger.

  9. Piezoelectric micromachined ultrasonic transducers for fingerprint sensing

    Lu, Yipeng

    Fingerprint identification is the most prevalent biometric technology due to its uniqueness, universality and convenience. Over the past two decades, a variety of physical mechanisms have been exploited to capture an electronic image of a human fingerprint. Among these, capacitive fingerprint sensors are the ones most widely used in consumer electronics because they are fabricated using conventional complementary metal oxide semiconductor (CMOS) integrated circuit technology. However, capacitive fingerprint sensors are extremely sensitive to finger contamination and moisture. This thesis will introduce an ultrasonic fingerprint sensor using a PMUT array, which offers a potential solution to this problem. In addition, it has the potential to increase security, as it allows images to be collected at various depths beneath the epidermis, providing images of the sub-surface dermis layer and blood vessels. Firstly, PMUT sensitivity is maximized by optimizing the layer stack and electrode design, and the coupling coefficient is doubled via series transduction. Moreover, a broadband PMUT with 97% fractional bandwidth is achieved by utilizing a thinner structure excited at two adjacent mechanical vibration modes with overlapping bandwidth. In addition, we proposed waveguide PMUTs, which function to direct acoustic waves, confine acoustic energy, and provide mechanical protection for the PMUT array. Furthermore, PMUT arrays were fabricated with different processes to form the membrane, including front-side etching with a patterned sacrificial layer, front-side etching with additional anchor, cavity SOI wafers and eutectic bonding. Additionally, eutectic bonding allows the PMUT to be integrated with CMOS circuits. PMUTs were characterized in the mechanical, electrical and acoustic domains. Using transmit beamforming, a narrow acoustic beam was achieved, and high-resolution (sub-100 microm) and short-range (~1 mm) pulse-echo ultrasonic imaging was demonstrated using a steel

  10. Pemanfaatan Teknologi Fingerprint Authentication untuk Otomatisasi Presensi Perkuliahan

    Abdulloh Fakih

    2015-10-01

    Full Text Available The student’s attendance is an important factor that can not be separated from the learning and evaluation activities. Higher Education usually using a signature as the proof of student attendance. However, the data validity using this method can not be guaranteed. An attendance information systemcan be used to to fulfil the required information and to improve data accuracy. This research aimed to test whether the attendance information system using fingerprint authentication technology is better than the existing conventional attendance system. There were several phases in this research. The first phase was the requirement identification using interviews, file analysis, and the observation techniques. The second phase was the requirement analysis to formulate solutions of existing problems. The third phase was to design a system using activity diagrams, class diagrams, and sequence diagrams. The fourth phase was the development of a system using Java, PHP and MySQL database. The fifth phase was to test the system using functional testing and acceptance testing. The last step was the evaluation of the system by comparing the attendance information system and the existing conventional attendance system. Results of the evaluation system shows that attendance information system using fingerprint authentication technology is better in terms of data accuracy and attendance management than the conventional attendance system.

  11. An enhanced feature set for pattern recognition based contrast enhancement of contact-less captured latent fingerprints in digitized crime scene forensics

    Hildebrandt, Mario; Kiltz, Stefan; Dittmann, Jana; Vielhauer, Claus

    2014-02-01

    In crime scene forensics latent fingerprints are found on various substrates. Nowadays primarily physical or chemical preprocessing techniques are applied for enhancing the visibility of the fingerprint trace. In order to avoid altering the trace it has been shown that contact-less sensors offer a non-destructive acquisition approach. Here, the exploitation of fingerprint or substrate properties and the utilization of signal processing techniques are an essential requirement to enhance the fingerprint visibility. However, especially the optimal sensory is often substrate-dependent. An enhanced generic pattern recognition based contrast enhancement approach for scans of a chromatic white light sensor is introduced in Hildebrandt et al.1 using statistical, structural and Benford's law2 features for blocks of 50 micron. This approach achieves very good results for latent fingerprints on cooperative, non-textured, smooth substrates. However, on textured and structured substrates the error rates are very high and the approach thus unsuitable for forensic use cases. We propose the extension of the feature set with semantic features derived from known Gabor filter based exemplar fingerprint enhancement techniques by suggesting an Epsilon-neighborhood of each block in order to achieve an improved accuracy (called fingerprint ridge orientation semantics). Furthermore, we use rotation invariant Hu moments as an extension of the structural features and two additional preprocessing methods (separate X- and Y Sobel operators). This results in a 408-dimensional feature space. In our experiments we investigate and report the recognition accuracy for eight substrates, each with ten latent fingerprints: white furniture surface, veneered plywood, brushed stainless steel, aluminum foil, "Golden-Oak" veneer, non-metallic matte car body finish, metallic car body finish and blued metal. In comparison to Hildebrandt et al.,1 our evaluation shows a significant reduction of the error rates

  12. Uniqueness: skews bit occurrence frequencies in randomly generated fingerprint libraries.

    Chen, Nelson G

    2016-08-01

    Requiring that randomly generated chemical fingerprint libraries have unique fingerprints such that no two fingerprints are identical causes a systematic skew in bit occurrence frequencies, the proportion at which specified bits are set. Observed frequencies (O) at which each bit is set within the resulting libraries systematically differ from frequencies at which bits are set at fingerprint generation (E). Observed frequencies systematically skew toward 0.5, with the effect being more pronounced as library size approaches the compound space, which is the total number of unique possible fingerprints given the number of bit positions each fingerprint contains. The effect is quantified for varying library sizes as a fraction of the overall compound space, and for changes in the specified frequency E. The cause and implications for this systematic skew are subsequently discussed. When generating random libraries of chemical fingerprints, the imposition of a uniqueness requirement should either be avoided or taken into account.

  13. Compatibility of DNA IQ™, QIAamp® DNA Investigator, and QIAsymphony® DNA Investigator® with various fingerprint treatments.

    Lin, Sze-Wah; Ip, Stephen C Y; Lam, Tze-Tsun; Tan, Tung-Fai; Yeung, Wai-Lung; Tam, Wai-Ming

    2017-03-01

    Latent fingerprint and touch DNA are the two most important contact evidence for individualization in forensic science which provide complementary information that can lead to direct and unequivocal identification of the culprit. In order to retrieve useful information from both fingerprints and DNA, which are usually mingled together, one strategy is to perform fingerprint examination prior to DNA analysis since common DNA sampling technique such as swabbing could disturb or even destroy fingerprint details. Here, we describe the compatibility of three automatic DNA extraction systems, namely, DNA IQ™, QIAamp ® DNA Investigator, and QIAsymphony ® DNA Investigator ® , with respective to the effects of various fingerprint detection techniques. Our results demonstrate that Super Glue fingerprint treatment followed by DNA IQ™ extraction shows better effectiveness in DNA profiling. Aluminum powder dusting offers the least interference to the three DNA extraction systems above. Magnetic powder dusting, on the other hand, strongly impedes DNA recovery. Physical Developer is the most intrusive, which yields profiles with poor quality, including lower peak heights, poor peak height ratios, and poor intra-color balance. In terms of the choice of extraction method, DNA IQ™ system is recommended for sampling after fingerprint treatments, but not the two DNA Investigator systems.

  14. The stable isotope fingerprinting technique for agricultural pesticide

    Suto, N.; Kawashima, H.

    2014-12-01

    The compound specific isotope analysis (CSIA) is nowadays an important and powerful tool in geochemical, environmental, and forensics field. In particular, the stable isotope ratio of pesticide is applied to biological process and reaction in the soil and distribution channel as forensics science. The aim of this study is to measure the stable isotope ratios of pesticide using various analytical methodologies, GC/IRMS, EA/IRMS, and LC/IRMS under high accuracy and precision. Therefore, these methods seemed to be important knowledge as geological field. In particular case, we present the method to measure carbon isotope ratio of nine malathion emulsion pesticides using GC/IRMS with cryo-focusing system to identify the source. In December 2013, food poisoning occurred after eating frozen dumplings (i.e., pizza and chicken nuggets) in Japan. There was a very high concentration, maximum value 15,000ppm, of malathion (diethyl (dimethoxythiophosphorylthio) succinate) in products. This incident was caused by an employee of process, and threatened the food safety. We analyzed the δ13C of malathion ranged from -30.63‰ to -29.54‰ (S.D. 0.10‰), the differences less than 1.0‰. All malathion emulsion sold in Japan are imported from Cheminova India Lat., Denmark to Sumitomo Chemical Co. Ltd., Japan. After that, Japanese each manufacture buy from Sumitomo Chemical Co. Ltd. And blended malathion and organic solvent (ethylbenzene and xylene). Therefore, ethylbenzene and xylene may be important tool as source identification. We measured the δ13C of ethylbenzene and m-,p-xylene, too. As the results, the δ13C of ethylbenzene and m-,p-xylene ranged from -28.20‰ to -20.84‰ (S.D. 0.16‰), -28.69‰ to -25.15‰ (S.D. 0.13‰), respectively. The δ13C of ethylbenzene and m-,p-xylene can be identified manufacture, although the δ13C of malathion indicated same value. In addition, we measured five pesticides (acephate, acetamiprid, glufosinate, glyphosate, and oxamyl) using EA/IRMS and LC/IRMS. The correlation coefficient between EA/IRMS and LC/IRMS is 0.97. The detail results will be presented in this conference.

  15. The compatibility of fingerprint visualization techniques with immunolabeling

    van Dam, Annemieke; Aalders, Maurice C. G.; van Leeuwen, Ton G.; Lambrechts, Saskia A. G.

    2013-01-01

    The chemical composition of a fingermark potentially holds a wealth of information about the fingermark donor, which can be extracted by immunolabeling. Immunolabeling can be used to detect specific components in fingermarks; however, to be applicable in the forensic field, it should be compatible

  16. SU-E-I-75: Development of New Biological Fingerprints for Patient Recognition to Identify Misfiled Images in a PACS Server

    Shimizu, Y; Yoon, Y; Iwase, K; Yasumatsu, S; Matsunobu, Y; Morishita, J

    2015-01-01

    Purpose: We are trying to develop an image-searching technique to identify misfiled images in a picture archiving and communication system (PACS) server by using five biological fingerprints: the whole lung field, cardiac shadow, superior mediastinum, lung apex, and right lower lung. Each biological fingerprint in a chest radiograph includes distinctive anatomical structures to identify misfiled images. The whole lung field was less effective for evaluating the similarity between two images than the other biological fingerprints. This was mainly due to the variation in the positioning for chest radiographs. The purpose of this study is to develop new biological fingerprints that could reduce influence of differences in the positioning for chest radiography. Methods: Two hundred patients were selected randomly from our database (36,212 patients). These patients had two images each (current and previous images). Current images were used as the misfiled images in this study. A circumscribed rectangular area of the lung and the upper half of the rectangle were selected automatically as new biological fingerprints. These biological fingerprints were matched to all previous images in the database. The degrees of similarity between the two images were calculated for the same and different patients. The usefulness of new the biological fingerprints for automated patient recognition was examined in terms of receiver operating characteristic (ROC) analysis. Results: Area under the ROC curves (AUCs) for the circumscribed rectangle of the lung, upper half of the rectangle, and whole lung field were 0.980, 0.994, and 0.950, respectively. The new biological fingerprints showed better performance in identifying the patients correctly than the whole lung field. Conclusion: We have developed new biological fingerprints: circumscribed rectangle of the lung and upper half of the rectangle. These new biological fingerprints would be useful for automated patient identification system

  17. SU-E-I-75: Development of New Biological Fingerprints for Patient Recognition to Identify Misfiled Images in a PACS Server

    Shimizu, Y; Yoon, Y; Iwase, K; Yasumatsu, S; Matsunobu, Y [Department of Health Sciences, Graduate School of Medical Sciences, Kyushu University, Fukuoka, JP (Japan); Morishita, J [Department of Health Sciences, Faculty of Medical Sciences, Kyushu University, Fukuoka, JP (Japan)

    2015-06-15

    Purpose: We are trying to develop an image-searching technique to identify misfiled images in a picture archiving and communication system (PACS) server by using five biological fingerprints: the whole lung field, cardiac shadow, superior mediastinum, lung apex, and right lower lung. Each biological fingerprint in a chest radiograph includes distinctive anatomical structures to identify misfiled images. The whole lung field was less effective for evaluating the similarity between two images than the other biological fingerprints. This was mainly due to the variation in the positioning for chest radiographs. The purpose of this study is to develop new biological fingerprints that could reduce influence of differences in the positioning for chest radiography. Methods: Two hundred patients were selected randomly from our database (36,212 patients). These patients had two images each (current and previous images). Current images were used as the misfiled images in this study. A circumscribed rectangular area of the lung and the upper half of the rectangle were selected automatically as new biological fingerprints. These biological fingerprints were matched to all previous images in the database. The degrees of similarity between the two images were calculated for the same and different patients. The usefulness of new the biological fingerprints for automated patient recognition was examined in terms of receiver operating characteristic (ROC) analysis. Results: Area under the ROC curves (AUCs) for the circumscribed rectangle of the lung, upper half of the rectangle, and whole lung field were 0.980, 0.994, and 0.950, respectively. The new biological fingerprints showed better performance in identifying the patients correctly than the whole lung field. Conclusion: We have developed new biological fingerprints: circumscribed rectangle of the lung and upper half of the rectangle. These new biological fingerprints would be useful for automated patient identification system

  18. Noncooperative 802.11 MAC Layer Fingerprinting and Tracking of Mobile Devices

    Pieter Robyns

    2017-01-01

    Full Text Available We present two novel noncooperative MAC layer fingerprinting and tracking techniques for Wi-Fi (802.11 enabled mobile devices. Our first technique demonstrates how a per-bit entropy analysis of a single captured frame allows an adversary to construct a fingerprint of the transmitter that is 80.0 to 67.6 percent unique for 50 to 100 observed devices and 33.0 to 15.1 percent unique for 1,000 to 10,000 observed devices. We show how existing mitigation strategies such as MAC address randomization can be circumvented using only this fingerprint and temporal information. Our second technique leverages peer-to-peer 802.11u Generic Advertisement Service (GAS requests and 802.11e Block Acknowledgement (BA requests to instigate transmissions on demand from devices that support these protocols. We validate these techniques using two datasets, one of which was recorded at a music festival containing 28,048 unique devices and the other at our research lab containing 138 unique devices. Finally, we discuss a number of countermeasures that can be put in place by mobile device vendors in order to prevent noncooperative tracking through the discussed techniques.

  19. RADIOMETRIC TECHNIQUES IN HEAVY MINERAL EXPLORATION AND EXPLOITATION

    DEMEIJER, RJ; TANCZOS, IC; STAPEL, C

    1994-01-01

    In recent years the Environmental Research Group of the KVI has been developing a number of radiometric techniques that may be employed in mineral sand exploration. These techniques involve: radiometric fingerprinting for assessing sand provenances and mineralogical composition; thermoluminescence

  20. Integrated DNA and fingerprint analyses in the identification of 60-year-old mummified human remains discovered in an Alaskan glacier.

    Loreille, Odile M; Parr, Ryan L; McGregor, Kevin A; Fitzpatrick, Colleen M; Lyon, Chriss; Yang, Dongya Y; Speller, Camilla F; Grimm, Michael R; Grimm, Michael J; Irwin, Jodi A; Robinson, Edward M

    2010-05-01

    This report describes the identification of a merchant mariner who perished in 1948 when Northwest Airlines Flight 4422, a DC-4 carrying 24 seamen and six crew members crashed into Mount Sanford, Alaska. Fifty-one years later, a human forearm and hand were found close by the wreckage of the plane, prompting identification efforts using DNA and fingerprints. There were significant challenges to both the fingerprint and DNA analyses. The hand was badly desiccated, making fingerprint friction-ridge detail almost invisible and the remains had been embalmed upon discovery, making DNA amplification difficult. We present the results of an interdisciplinary approach that successfully addressed these challenges and ultimately led to the identification of the remains. These efforts relied on efficient fingerprint rejuvenation and imaging techniques that improved print resolution, as well as new DNA extraction techniques optimized for aggressively embalmed remains.

  1. [Comparison of Bacteria ERIC-PCR Fingerprints of Index Fingers and Contactants].

    Liu, Y T; Sun, D M; Shi, S P; Yang, X

    2018-02-01

    To explore the bacteria relevance between index fingers and contactant' surfaces (mobile phone touch screen and desktop of personal office table). Bacteria were collected from the index fingers, mobile phone touch screen and desktop of personal office table of 10 volunteers. Enterobacterial repetitive intergenic consensus (ERIC)-PCR fingerprint was established by PCR amplification technique of metagenome. There were 7 volunteers' ERIC-PCR fingerprints of index fingers matched that took from the mobile phone touch screens, and different from each other. There were 3 volunteers' ERIC-PCR fingerprints of index fingers matched that took from desk top of personal office table, and other 7 volunteers' ERIC-PCR fingerprints did not match perfectly with that took from desk top of personal office table, but had at least one similar band for both. The bacteria on index finger shows individual specificity, which on mobile phone touching screen and personal desktop may be a new biological sample of forensic identification. Copyright© by the Editorial Department of Journal of Forensic Medicine.

  2. Contrast enhancement of fingerprint images using intuitionistic type II fuzzy set

    Devarasan Ezhilmaran

    2015-04-01

    Full Text Available A novel contrast image enhancement of fingerprint images using intuitionistic type II fuzzy set theory is recommended in this work. The method of Hamacher T co-norm(S norm which generates a new membership function with the help of upper and lower membership function of type II fuzzy set. The finger print identification is one of the very few techniques employed in forensic science to aid criminal investigations in daily life, providing access control in financial security;-, visa related services, as well as others. Mostly fingerprint images are poorly illuminated and hardly visible, so it is necessary to enhance the input images. The enhancement is useful for authentication and matching. The fingerprint enhancement is vital for identifying and authenticating people by matching their fingerprints with the stored one in the database. The proposed enhancement of the intuitionistic type II fuzzy set theory results showed that it is more effective, especially, very useful for forensic science operations. The experimental results were compared with non-fuzzy, fuzzy, intuitionistic fuzzy and type II fuzzy methods in which the proposed method offered better results with good quality, less noise and low blur features.

  3. Verification and Validation of a Fingerprint Image Registration Software

    Liu Yan

    2006-01-01

    Full Text Available The need for reliable identification and authentication is driving the increased use of biometric devices and systems. Verification and validation techniques applicable to these systems are rather immature and ad hoc, yet the consequences of the wide deployment of biometric systems could be significant. In this paper we discuss an approach towards validation and reliability estimation of a fingerprint registration software. Our validation approach includes the following three steps: (a the validation of the source code with respect to the system requirements specification; (b the validation of the optimization algorithm, which is in the core of the registration system; and (c the automation of testing. Since the optimization algorithm is heuristic in nature, mathematical analysis and test results are used to estimate the reliability and perform failure analysis of the image registration module.

  4. Location Fingerprint Extraction for Magnetic Field Magnitude Based Indoor Positioning

    Wenhua Shao

    2016-01-01

    Full Text Available Smartphone based indoor positioning has greatly helped people in finding their positions in complex and unfamiliar buildings. One popular positioning method is by utilizing indoor magnetic field, because this feature is stable and infrastructure-free. In this method, the magnetometer embedded on the smartphone measures indoor magnetic field and queries its position. However, the environments of the magnetometer are rather harsh. This harshness mainly consists of coarse-grained hard/soft-iron calibrations and sensor electronic noise. The two kinds of interferences decrease the position distinguishability of the magnetic field. Therefore, it is important to extract location features from magnetic fields to reduce these interferences. This paper analyzes the main interference sources of the magnetometer embedded on the smartphone. In addition, we present a feature distinguishability measurement technique to evaluate the performance of different feature extraction methods. Experiments revealed that selected fingerprints will improve position distinguishability.

  5. DNA fingerprinting of pearls to determine their origins.

    Joana B Meyer

    Full Text Available We report the first successful extraction of oyster DNA from a pearl and use it to identify the source oyster species for the three major pearl-producing oyster species Pinctada margaritifera, P. maxima and P. radiata. Both mitochondrial and nuclear gene fragments could be PCR-amplified and sequenced. A polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP assay in the internal transcribed spacer (ITS region was developed and used to identify 18 pearls of unknown origin. A micro-drilling technique was developed to obtain small amounts of DNA while maintaining the commercial value of the pearls. This DNA fingerprinting method could be used to document the source of historic pearls and will provide more transparency for traders and consumers within the pearl industry.

  6. SVD compression for magnetic resonance fingerprinting in the time domain.

    McGivney, Debra F; Pierre, Eric; Ma, Dan; Jiang, Yun; Saybasili, Haris; Gulani, Vikas; Griswold, Mark A

    2014-12-01

    Magnetic resonance (MR) fingerprinting is a technique for acquiring and processing MR data that simultaneously provides quantitative maps of different tissue parameters through a pattern recognition algorithm. A predefined dictionary models the possible signal evolutions simulated using the Bloch equations with different combinations of various MR parameters and pattern recognition is completed by computing the inner product between the observed signal and each of the predicted signals within the dictionary. Though this matching algorithm has been shown to accurately predict the MR parameters of interest, one desires a more efficient method to obtain the quantitative images. We propose to compress the dictionary using the singular value decomposition, which will provide a low-rank approximation. By compressing the size of the dictionary in the time domain, we are able to speed up the pattern recognition algorithm, by a factor of between 3.4-4.8, without sacrificing the high signal-to-noise ratio of the original scheme presented previously.

  7. Fingerprint elements scatter analysis on ancient chinese Ru porcelains samples

    Gao Zhengyao; Wang Jie; Chen Xiande

    1997-01-01

    Altogether 28 samples, mainly including glazes and bodies of ancient Chinese Ru porcelain, were analyzed by NAA technique and the contents of 36 elements were compared. The scatter analysis for nine fingerprint-elements indicates that almost all ancient Chinese Ru porcelain samples had nearly identical and long-term stable source of raw materials although they were fired in different kilns, at varying time and with distinct colors, and moreover, the source of raw materials for modern Ru porcelain seems to approach that for ancient one. The close provenance relation between ancient Jun porcelain and ancient Ru porcelain is also preliminarily verified. The glaze material of Jingdezhen white porcelain is totally different from all other samples. It shows that the former came from a separate source

  8. Maximum Likelihood Reconstruction for Magnetic Resonance Fingerprinting.

    Zhao, Bo; Setsompop, Kawin; Ye, Huihui; Cauley, Stephen F; Wald, Lawrence L

    2016-08-01

    This paper introduces a statistical estimation framework for magnetic resonance (MR) fingerprinting, a recently proposed quantitative imaging paradigm. Within this framework, we present a maximum likelihood (ML) formalism to estimate multiple MR tissue parameter maps directly from highly undersampled, noisy k-space data. A novel algorithm, based on variable splitting, the alternating direction method of multipliers, and the variable projection method, is developed to solve the resulting optimization problem. Representative results from both simulations and in vivo experiments demonstrate that the proposed approach yields significantly improved accuracy in parameter estimation, compared to the conventional MR fingerprinting reconstruction. Moreover, the proposed framework provides new theoretical insights into the conventional approach. We show analytically that the conventional approach is an approximation to the ML reconstruction; more precisely, it is exactly equivalent to the first iteration of the proposed algorithm for the ML reconstruction, provided that a gridding reconstruction is used as an initialization.

  9. Reference Device-Assisted Adaptive Location Fingerprinting

    Dongjin Wu

    2016-06-01

    Full Text Available Location fingerprinting suffers in dynamic environments and needs recalibration from time to time to maintain system performance. This paper proposes an adaptive approach for location fingerprinting. Based on real-time received signal strength indicator (RSSI samples measured by a group of reference devices, the approach applies a modified Universal Kriging (UK interpolant to estimate adaptive temporal and environmental radio maps. The modified UK can take the spatial distribution characteristics of RSSI into account. In addition, the issue of device heterogeneity caused by multiple reference devices is further addressed. To compensate the measuring differences of heterogeneous reference devices, differential RSSI metric is employed. Extensive experiments were conducted in an indoor field and the results demonstrate that the proposed approach not only adapts to dynamic environments and the situation of changing APs’ positions, but it is also robust toward measuring differences of heterogeneous reference devices.

  10. Técnicas de mineração de dados para análise da precipitação pluvial decenal no Rio Grande do Sul Data mining techniques for decennial analysis of rainfall in Rio Grande do Sul

    Raquel S Boschi

    2011-12-01

    Full Text Available O objetivo deste trabalho foi analisar o comportamento espaçotemporal da precipitação pluvial no Estado do Rio Grande do Sul, entre os decênios de 1987-1996 e 1997-2006, por meio de técnicas de mineração de dados. As séries históricas foram adquiridas no sistema de informações hidrológicas Hidroweb. A metodologia utilizada teve como base o modelo CRISP-DM (Cross Industry Standard Process for Data Mining. Foram definidas áreas pluviometricamente homogêneas para os decênios de 1987-1996 e 1997-2006. Em seguida, pela sobreposição dos agrupamentos obtidos para os dois períodos, encontraram-se seis zonas comuns aos dois decênios (A a F. As alterações ocorridas foram avaliadas nas seguintes escalas temporais: anual, sazonal e mensalmente. Os resultados indicaram incrementos significativos (20 a 240 mm na precipitação anual em todas as zonas, exceto na zona A. Na análise sazonal, as variações foram aleatórias, sendo que, na primavera, todas as zonas apresentaram incremento significativo (44 a 142 mm. Na análise mensal, destaca-se a redução ocorrida no mês de janeiro em todas as zonas, exceto na E. Nos demais meses, as variações foram aleatórias. Os resultados mostram que, entre os decênios, houve uma alteração no volume da precipitação pluvial em todas as escalas temporais analisadas.The objective of this study was to analyze the spatio-temporal rainfall in Rio Grande do Sul, between 1987-1996 and 1997-2006 decades by using techniques of data mining. The historical series were acquired from the hydrological information Hidroweb system. The methodology used was based on the CRISP-DM (Cross Industry Standard Process for Data Mining model. First, homogeneous precipitation areas for the 1987-1996 and 1997-2006 decades were defined. Subsequently, by the overlapping of the clusters obtained from both periods, six common areas were defined ranging from A to F. The changes in the volume of precipitation were evaluated

  11. SURVEY ON E-FINGERPRINT TICKET

    Zakkam Solomon; Meghana K M; Manjula; Roshini B

    2017-01-01

    Earlier work has demonstrated that when going in a transport the installment accomplished for ticket is with money .The transport ticket has such an installment figure which makes the voyager or the conductor shy of cash as far as change. This makes the conductor to keep the change with himself .This makes bother to the explorers. Subsequently there is a requirement for better workplace. To conquer this issue we are making utilization of fingerprints of the voyager which are connected to the ...

  12. Fingerprint matching algorithm for poor quality images

    Vedpal Singh

    2015-04-01

    Full Text Available The main aim of this study is to establish an efficient platform for fingerprint matching for low-quality images. Generally, fingerprint matching approaches use the minutiae points for authentication. However, it is not such a reliable authentication method for low-quality images. To overcome this problem, the current study proposes a fingerprint matching methodology based on normalised cross-correlation, which would improve the performance and reduce the miscalculations during authentication. It would decrease the computational complexities. The error rate of the proposed method is 5.4%, which is less than the two-dimensional (2D dynamic programming (DP error rate of 5.6%, while Lee's method produces 5.9% and the combined method has 6.1% error rate. Genuine accept rate at 1% false accept rate is 89.3% but at 0.1% value it is 96.7%, which is higher. The outcome of this study suggests that the proposed methodology has a low error rate with minimum computational effort as compared with existing methods such as Lee's method and 2D DP and the combined method.

  13. Laser speckle decorrelation for fingerprint acquisition

    Schirripa Spagnolo, Giuseppe; Cozzella, Lorenzo

    2012-01-01

    Biometry is gaining popularity as a physical security approach in situations where a high level of security is necessary. Currently, biometric solutions are embedded in a very large and heterogeneous group of applications. One of the most sensible is for airport security access to boarding gates. More airports are introducing biometric solutions based on face, fingerprint or iris recognition for passenger identification. In particular, fingerprints are the most widely used biometric, and they are mandatorily included in electronic identification documents. One important issue, which is difficult to address in traditional fingerprint acquisition systems, is preventing contact between subsequent users; sebum, which can be a potential vector for contagious diseases. Currently, non-contact devices are used to overcome this problem. In this paper, a new contact device based on laser speckle decorrelation is presented. Our system has the advantage of being compact and low-cost compared with an actual contactless system, allowing enhancement of the sebum pattern imaging contrast in a simple and low-cost way. Furthermore, it avoids the spreading of contagious diseases. (paper)

  14. Efficient Hardware Implementation For Fingerprint Image Enhancement Using Anisotropic Gaussian Filter.

    Khan, Tariq Mahmood; Bailey, Donald G; Khan, Mohammad A U; Kong, Yinan

    2017-05-01

    A real-time image filtering technique is proposed which could result in faster implementation for fingerprint image enhancement. One major hurdle associated with fingerprint filtering techniques is the expensive nature of their hardware implementations. To circumvent this, a modified anisotropic Gaussian filter is efficiently adopted in hardware by decomposing the filter into two orthogonal Gaussians and an oriented line Gaussian. An architecture is developed for dynamically controlling the orientation of the line Gaussian filter. To further improve the performance of the filter, the input image is homogenized by a local image normalization. In the proposed structure, for a middle-range reconfigurable FPGA, both parallel compute-intensive and real-time demands were achieved. We manage to efficiently speed up the image-processing time and improve the resource utilization of the FPGA. Test results show an improved speed for its hardware architecture while maintaining reasonable enhancement benchmarks.

  15. A network identity authentication system based on Fingerprint identification technology

    Xia, Hong-Bin; Xu, Wen-Bo; Liu, Yuan

    2005-10-01

    Fingerprint verification is one of the most reliable personal identification methods. However, most of the automatic fingerprint identification system (AFIS) is not run via Internet/Intranet environment to meet today's increasing Electric commerce requirements. This paper describes the design and implementation of the archetype system of identity authentication based on fingerprint biometrics technology, and the system can run via Internet environment. And in our system the COM and ASP technology are used to integrate Fingerprint technology with Web database technology, The Fingerprint image preprocessing algorithms are programmed into COM, which deployed on the internet information server. The system's design and structure are proposed, and the key points are discussed. The prototype system of identity authentication based on Fingerprint have been successfully tested and evaluated on our university's distant education applications in an internet environment.

  16. Studies on Chromatographic Fingerprint and Fingerprinting Profile-Efficacy Relationship of Saxifraga stolonifera Meerb.

    Xing-Dong Wu

    2015-12-01

    Full Text Available This work investigated the spectrum-effect relationships between high performance liquid chromatography (HPLC fingerprints and the anti-benign prostatic hyperplasia activities of aqueous extracts from Saxifraga stolonifera. The fingerprints of S. stolonifera from various sources were established by HPLC and evaluated by similarity analysis (SA, hierarchical clustering analysis (HCA and principal component analysis (PCA. Nine samples were obtained from these 24 batches of different origins, according to the results of SA, HCA and the common chromatographic peaks area. A testosterone-induced mouse model of benign prostatic hyperplasia (BPH was used to establish the anti-benign prostatic hyperplasia activities of these nine S. stolonifera samples. The model was evaluated by analyzing prostatic index (PI, serum acid phosphatase (ACP activity, concentrations of serum dihydrotestosterone (DHT, prostatic acid phosphatase (PACP and type II 5α-reductase (SRD5A2. The spectrum-effect relationships between HPLC fingerprints and anti-benign prostatic hyperplasia activities were investigated using Grey Correlation Analysis (GRA and partial least squares regression (PLSR. The results showed that a close correlation existed between the fingerprints and anti-benign prostatic hyperplasia activities, and peak 14 (chlorogenic acid, peak 17 (quercetin 5-O-β-d-glucopyranoside and peak 18 (quercetin 3-O-β-l-rhamno-pyranoside in the HPLC fingerprints might be the main active components against anti-benign prostatic hyperplasia. This work provides a general model for the study of spectrum-effect relationships of S. stolonifera by combing HPLC fingerprints with a testosterone-induced mouse model of BPH, which can be employed to discover the principle components of anti-benign prostatic hyperplasia bioactivity.

  17. Vitality detection in personal authentication systems using fingerprints

    Coli, Pietro

    2008-01-01

    Fingerprints are considered as the sign of each human being, and this has contributed the development of biometric applications based on such features. Since 2002, an important vulnerability has been shown: it is possible to deceive fingerprint scanners through artificial replicas of fingertips. In order to address this shortcoming it is need to recognize a spoofing attempt with artificial fingers looking for some “life signs” each time an user submit a fingerprint (vitality detection problem...

  18. Enhance Criminal Investigation by Proposed Fingerprint Recognition System

    Hashem, S.H.; Maolod, A.T.; Mohammad, A.A.

    2014-01-01

    Law enforcement officers and forensic specialists spend hours thinking about how fingerprints solve crimes, and trying to find, collect, record and compare these unique identifiers that can connect a specific person to a specific crime. These individuals understand that a basic human feature that most people take for granted, can be one of the most effective tools in crime solving.This research exploits our previous work to be applicable in criminal investigation field. The present study aims to solve the advance crime by strength fingerprint’s criminal investigation to control the alterations happen intentionally to criminals’ fingerprint. That done by suggest strategy introduce an optimal fingerprint image feature’s vector to the person and then considers it to be stored in database for future matching. Selecting optimal fingerprint feature’s vector strategy deal with considering 10 fingerprints for each criminal person (take the fingerprint in different time and different circumstance of criminal such as finger is dirty, wet, trembling, etc.). Proposal begun with apply a proposed enrollment on all 10 fingerprint for each criminal, the enrollment include the following consequence steps; begin with preprocessing step for each of 10 images including enhancement, then two level of feature extraction (first level to extract arches, whorls, and loops, where second level extract minutiae), after that applying proposed Genetic Algorithm to select optimal fingerprint, master fingerprint, which in our point of view present the most universal image which include more detailed features to recognition. Master fingerprint will be feature’s vector which stored in database. Then apply the proposed matching by testing fingerprints with these stored in database.While, measuring of criminal fingerprint investigation performance by calculating False Reject Rate (FRR)and False Accept Rate (FAR) for the traditional system and the proposed in criminal detection field. The

  19. Network-based Fingerprint Authentication System Using a Mobile Device

    Zhang, Qihu

    2016-01-01

    Abstract— Fingerprint-based user authentication is highly effective in networked services such as electronic payment, but conventional authentication solutions have problems in cost, usability and security. To resolve these problems, we propose a touch-less fingerprint authentication solution, in which a mobile device's built-in camera is used to capture fingerprint image, and then it is sent to the server to determine the identity of the user. We designed and implemented a prototype as an a...

  20. Linking sediment fingerprinting and modeling outputs for a Spanish Pyrenean river catchment.

    Palazón, Leticia; Latorre, Borja; Gaspar, Leticia; Blake, Williams H.; Smith, Hugh G.; Navas, Ana

    2015-04-01

    Indirect techniques to study fine sediment redistribution in river catchments could provide unique and diverse information, which, when combined become a powerful tool to address catchment management problems. Such combinations could solve limitations of individual techniques and provide different lines of information to address a particular problem. The Barasona reservoir has suffered from siltation since its construction, with the loss of over one third of its storage volume in around 30 study years (period 1972-1996). Information on sediment production from tributary catchments for the reservoir is required to develop management plans for maintaining reservoir sustainability. Large spatial variability in sediment delivery was found in previous studies in the Barasona catchment and the major sediment sources identified included badlands developed in the middle part of the catchment and the agricultural fields in its lower part. From the diverse range of indirect techniques, fingerprinting sediment sources and computer models could be linked to obtain a more holistic view of the processes related to sediment redistribution in the Barasona river catchment (1509 km2, Central Spanish Pyrenees), which comprises agricultural and forest land uses. In the present study, the results from a fingerprinting procedure and the SWAT model were compared and combined to improve the knowledge of land use sediment source contributions to the reservoir. Samples from the study catchment were used to define soil parameters for the model and for fingerprinting the land use sources. The fingerprinting approach provided information about relative contributions from land use sources to the superficial sediment samples taken from the reservoir infill. The calibration and validation of the model provided valuable information, for example on the timescale of sediment production from the different land uses within the catchment. Linking results from both techniques enabled us to achieve a

  1. Identification and DNA fingerprinting of Legionella strains by randomly amplified polymorphic DNA analysis.

    Bansal, N S; McDonell, F

    1997-01-01

    The randomly amplified polymorphic DNA (RAPD) technique was used in the development of a fingerprinting (typing) and identification protocol for Legionella strains. Twenty decamer random oligonucleotide primers were screened for their discriminatory abilities. Two candidate primers were selected. By using a combination of these primers, RAPD analysis allowed for the differentiation between all different species, between the serogroups, and further differentiation between subtypes of the same ...

  2. Fingerprints as a Proxy for Readership of Sales Flyers

    Schmidt, Marcus J.; Krause, Niels; Solgaard, Hans Stubbe

    2007-01-01

      Can readership of sales flyers and free newspapers be estimated by revealing fingerprints? In this paper we report the results of an empirical analysis based on 4604 flyer-pages conducted to assess the feasibility of the method. Results are encouraging, and indicate that the method presently may...... serve as a conservative estimate of readership. Advertising management may thus use the fingerprints-approach as an alternative audience measure and thereby assess the convergent validity of the traditional interview method and the fingerprint approach. While the fingerprint method appears valid...

  3. Study on Accuracy of Judgments by Chinese Fingerprint Examiners

    Shiquan Liu

    2015-01-01

    Full Text Available The interpretation of fingerprint evidence depends on the judgments of fingerprint examiners. This study assessed the accuracy of different judgments made by fingerprint examiners following the Analysis, Comparison, and Evaluation (ACE process. Each examiner was given five marks for analysis, comparison, and evaluation. We compared the experts′ judgments against the ground truth and used an annotation platform to evaluate how Chinese fingerprint examiners document their comparisons during the identification process. The results showed that different examiners demonstrated different accuracy of judgments and different mechanisms to reach them.

  4. Capacity and optimal collusion attack channels for Gaussian fingerprinting games

    Wang, Ying; Moulin, Pierre

    2007-02-01

    In content fingerprinting, the same media covertext - image, video, audio, or text - is distributed to many users. A fingerprint, a mark unique to each user, is embedded into each copy of the distributed covertext. In a collusion attack, two or more users may combine their copies in an attempt to "remove" their fingerprints and forge a pirated copy. To trace the forgery back to members of the coalition, we need fingerprinting codes that can reliably identify the fingerprints of those members. Researchers have been focusing on designing or testing fingerprints for Gaussian host signals and the mean square error (MSE) distortion under some classes of collusion attacks, in terms of the detector's error probability in detecting collusion members. For example, under the assumptions of Gaussian fingerprints and Gaussian attacks (the fingerprinted signals are averaged and then the result is passed through a Gaussian test channel), Moulin and Briassouli1 derived optimal strategies in a game-theoretic framework that uses the detector's error probability as the performance measure for a binary decision problem (whether a user participates in the collusion attack or not); Stone2 and Zhao et al. 3 studied average and other non-linear collusion attacks for Gaussian-like fingerprints; Wang et al. 4 stated that the average collusion attack is the most efficient one for orthogonal fingerprints; Kiyavash and Moulin 5 derived a mathematical proof of the optimality of the average collusion attack under some assumptions. In this paper, we also consider Gaussian cover signals, the MSE distortion, and memoryless collusion attacks. We do not make any assumption about the fingerprinting codes used other than an embedding distortion constraint. Also, our only assumptions about the attack channel are an expected distortion constraint, a memoryless constraint, and a fairness constraint. That is, the colluders are allowed to use any arbitrary nonlinear strategy subject to the above

  5. Recovery of latent fingerprints and DNA on human skin.

    Färber, Doris; Seul, Andrea; Weisser, Hans-Joachim; Bohnert, Michael

    2010-11-01

    The project "Latent Fingerprints and DNA on Human Skin" was the first systematic research in Europe dealing with detection of fingerprints and DNA left by offenders on the skin of corpses. One thousand samples gave results that allow general statements on the materials and methods used. The tests were carried out according to a uniform trial structure. Fingerprints were deposited by natural donors on corpses. The latent fingerprints were treated with magnetic powder or black fingerprint powder. Afterward, they were lifted with silicone casting material (Isomark(®)) or gelatine foil. All lifts were swabbed to recover DNA. It was possible to visualize comparable and identifiable fingerprints on the skin of corpses (16%). In the same categories, magnetic powder (18.4%) yielded better results than black fingerprint powder (13.6%). The number of comparable and identifiable fingerprints decreased on the lifts (12.7%). Isomark(®) (14.9%) was the better lifting material in comparison with gelatine foil (10.1%). In one-third of the samples, DNA could be extracted from the powdered and lifted latents. Black fingerprint powder delivered the better result with a rate of 2.2% for full DNA profiles and profiles useful for exclusion in comparison with 1.8% for the magnetic powder traces. Isomark(®) (3.1%) yielded better results than gelatine foil (0.6%). © 2010 American Academy of Forensic Sciences.

  6. Environmental impact to multimedia systems on the example of fingerprint aging behavior at crime scenes

    Merkel, Ronny; Breuhan, Andy; Hildebrandt, Mario; Vielhauer, Claus; Bräutigam, Anja

    2012-06-01

    In the field of crime scene forensics, current methods of evidence collection, such as the acquisition of shoe-marks, tireimpressions, palm-prints or fingerprints are in most cases still performed in an analogue way. For example, fingerprints are captured by powdering and sticky tape lifting, ninhydrine bathing or cyanoacrylate fuming and subsequent photographing. Images of the evidence are then further processed by forensic experts. With the upcoming use of new multimedia systems for the digital capturing and processing of crime scene traces in forensics, higher resolutions can be achieved, leading to a much better quality of forensic images. Furthermore, the fast and mostly automated preprocessing of such data using digital signal processing techniques is an emerging field. Also, by the optical and non-destructive lifting of forensic evidence, traces are not destroyed and therefore can be re-captured, e.g. by creating time series of a trace, to extract its aging behavior and maybe determine the time the trace was left. However, such new methods and tools face different challenges, which need to be addressed before a practical application in the field. Based on the example of fingerprint age determination, which is an unresolved research challenge to forensic experts since decades, we evaluate the influences of different environmental conditions as well as different types of sweating and their implications to the capturing sensory, preprocessing methods and feature extraction. We use a Chromatic White Light (CWL) sensor to exemplary represent such a new optical and contactless measurement device and investigate the influence of 16 different environmental conditions, 8 different sweat types and 11 different preprocessing methods on the aging behavior of 48 fingerprint time series (2592 fingerprint scans in total). We show the challenges that arise for such new multimedia systems capturing and processing forensic evidence

  7. Ultrasonic Fingerprinting of Structural Materials: Spent Nuclear Fuel Containers Case-Study

    Sednev, D.; Lider, A.; Demyanuk, D.; Kroening, M.; Salchak, Y.

    Nowadays, NDT is mainly focused on safety purposes, but it seems possible to apply those methods to provide national and IAEA safeguards. The containment of spent fuel in storage casks could be dramatically improved in case of development of so-called "smart" spent fuel storage and transfer casks. Such casks would have tamper indicating and monitoring/tracking features integrated directly into the cask design. The microstructure of the containers material as well as of the dedicated weld seam is applied to the lid and the cask body and provides a unique fingerprint of the full container, which can be reproducibly scanned by using an appropriate technique. The echo-sounder technique, which is the most commonly used method for material inspection, was chosen for this project. The main measuring parameter is acoustic noise, reflected from material's artefacts. The purpose is to obtain structural fingerprinting. Reference measurement and additional measurement results were compared. Obtained results have verified the appliance of structural fingerprint and the chosen control method. The successful authentication demonstrates the levels of the feature points' compliance exceeding the given threshold which differs considerably from the percentage of the concurrent points during authentication from other points. Since reproduction or doubling of the proposed unique identification characteristics is impossible at the current state science and technology, application of this technique is considered to identify the interference into the nuclear materials displacement with high accuracy.

  8. Proton transfer reaction-mass spectrometry volatile organic compound fingerprinting for monovarietal extra virgin olive oil identification

    Ruiz-Samblas, C.; Tres, A.; Koot, A.H.; Ruth, van S.M.; Gonzalez-Casado, A.; Cuadros-Rodriguez, L.

    2012-01-01

    Proton transfer reaction-mass spectrometry (PTR-MS) is a relatively new technique that allows the fast and accurate qualification of the volatile organic compound (VOC) fingerprint. This paper describes the analysis of thirty samples of extra virgin olive oil, of five different varieties of olive

  9. An Optimized DNA Analysis Workflow for the Sampling, Extraction, and Concentration of DNA obtained from Archived Latent Fingerprints.

    Solomon, April D; Hytinen, Madison E; McClain, Aryn M; Miller, Marilyn T; Dawson Cruz, Tracey

    2018-01-01

    DNA profiles have been obtained from fingerprints, but there is limited knowledge regarding DNA analysis from archived latent fingerprints-touch DNA "sandwiched" between adhesive and paper. Thus, this study sought to comparatively analyze a variety of collection and analytical methods in an effort to seek an optimized workflow for this specific sample type. Untreated and treated archived latent fingerprints were utilized to compare different biological sampling techniques, swab diluents, DNA extraction systems, DNA concentration practices, and post-amplification purification methods. Archived latent fingerprints disassembled and sampled via direct cutting, followed by DNA extracted using the QIAamp® DNA Investigator Kit, and concentration with Centri-Sep™ columns increased the odds of obtaining an STR profile. Using the recommended DNA workflow, 9 of the 10 samples provided STR profiles, which included 7-100% of the expected STR alleles and two full profiles. Thus, with carefully selected procedures, archived latent fingerprints can be a viable DNA source for criminal investigations including cold/postconviction cases. © 2017 American Academy of Forensic Sciences.

  10. MagicFinger: 3D Magnetic Fingerprints for Indoor Location

    Daniel Carrillo

    2015-07-01

    Full Text Available Given the indispensable role of mobile phones in everyday life, phone-centric sensing systems are ideal candidates for ubiquitous observation purposes. This paper presents a novel approach for mobile phone-centric observation applied to indoor location. The approach involves a location fingerprinting methodology that takes advantage of the presence of magnetic field anomalies inside buildings. Unlike existing work on the subject, which uses the intensity of magnetic field for fingerprinting, our approach uses all three components of the measured magnetic field vectors to improve accuracy. By using adequate soft computing techniques, it is possible to adequately balance the constraints of common solutions. The resulting system does not rely on any infrastructure devices and therefore is easy to manage and deploy. The proposed system consists of two phases: the offline phase and the online phase. In the offline phase, magnetic field measurements are taken throughout the building, and 3D maps are generated. Then, during the online phase, the user’s location is estimated through the best estimator for each zone of the building. Experimental evaluations carried out in two different buildings confirm the satisfactory performance of indoor location based on magnetic field vectors. These evaluations provided an error of (11.34 m, 4.78 m in the (x; y components of the estimated positions in the first building where the experiments were carried out, with a standard deviation of (3.41 m, 4.68 m; and in the second building, an error of (4 m, 2.98 m with a deviation of (2.64 m, 2.33 m.

  11. Characterization of organic and conventional sweet basil leaves using chromatographic and flow-injection mass spectrometric (FIMS) fingerprints combined with principal component analysis

    Lu, Yingjian; Gao, Boyan; Chen, Pei; Charles, Denys; Yu, Liangli (Lucy)

    2014-01-01

    Sweet basil, Ocimum basilicum., is one of the most important and wildly used spices and has been shown to have antioxidant, antibacterial, and anti-diarrheal activities. In this study, high performance liquid chromatographic (HPLC) and flow-injection mass spectrometric (FIMS) fingerprinting techniques were used to differentiate organic and conventional sweet basil leaf samples. Principal component analysis (PCA) of the fingerprints indicated that both HPLC and FIMS fingerprints could effectively detect the chemical differences in the organic and conventional sweet basil leaf samples. This study suggested that the organic basil sample contained greater concentrations of almost all the major compounds than its conventional counterpart on a per same botanical weight basis. The FIMS method was able to rapidly differentiate the organic and conventional sweet basil leaf samples (1 min analysis time), whereas the HPLC fingerprints provided more information about the chemical composition of the basil samples with a longer analytical time. PMID:24518341

  12. New optimized DNA extraction protocol for fingerprints deposited on a special self-adhesive security seal and other latent samples used for human identification.

    Kopka, Julieta; Leder, Monika; Jaureguiberry, Stella M; Brem, Gottfried; Boselli, Gabriel O

    2011-09-01

    Obtaining complete short tandem repeat (STR) profiles from fingerprints containing minimal amounts of DNA, using standard extraction techniques, can be difficult. The aim of this study was to evaluate a new kit, Fingerprint DNA Finder (FDF Kit), recently launched for the extraction of DNA and STR profiling from fingerprints placed on a special device known as Self-Adhesive Security Seal Sticker(®) and other latent fingerprints on forensic evidentiary material like metallic guns. The DNA extraction system is based on a reversal of the silica principle, and all the potential inhibiting substances are retained on the surface of a special adsorbent, while nucleic acids are not bound and remain in solution dramatically improving DNA recovery. DNA yield was quite variable among the samples tested, rendering in most of the cases (>90%) complete STR profiles, free of PCR inhibitors, and devoid of artifacts. Even samples with DNA amount below 100 pg could be successfully analyzed. © 2011 American Academy of Forensic Sciences.

  13. Sediment source fingerprinting as an aid to catchment management: A review of the current state of knowledge and a methodological decision-tree for end-users

    Collins, A.L; Pulley, S.; Foster, I.D.L; Gellis, Allen; Porto, P.; Horowitz, A.J.

    2017-01-01

    The growing awareness of the environmental significance of fine-grained sediment fluxes through catchment systems continues to underscore the need for reliable information on the principal sources of this material. Source estimates are difficult to obtain using traditional monitoring techniques, but sediment source fingerprinting or tracing procedures, have emerged as a potentially valuable alternative. Despite the rapidly increasing numbers of studies reporting the use of sediment source fingerprinting, several key challenges and uncertainties continue to hamper consensus among the international scientific community on key components of the existing methodological procedures. Accordingly, this contribution reviews and presents recent developments for several key aspects of fingerprinting, namely: sediment source classification, catchment source and target sediment sampling, tracer selection, grain size issues, tracer conservatism, source apportionment modelling, and assessment of source predictions using artificial mixtures. Finally, a decision-tree representing the current state of knowledge is presented, to guide end-users in applying the fingerprinting approach.

  14. The behavioural characteristics of sediment properties and their implications for sediment fingerprinting as an approach for identifying sediment sources in river basins

    Koiter, A. J.; Owens, P. N.; Petticrew, E. L.; Lobb, D. A.

    2013-10-01

    Sediment fingerprinting is a technique that is increasingly being used to improve the understanding of sediment dynamics within river basins. At present, one of the main limitations of the technique is the ability to link sediment back to their sources due to the non-conservative nature of many of the sediment properties. The processes that occur between the sediment source locations and the point of collection downstream are not well understood or quantified and currently represent a black-box in the sediment fingerprinting approach. The literature on sediment fingerprinting tends to assume that there is a direct connection between sources and sinks, while much of the broader environmental sedimentology literature identifies that numerous chemical, biological and physical transformations and alterations can occur as sediment moves through the landscape. The focus of this paper is on the processes that drive particle size and organic matter selectivity and biological, geochemical and physical transformations and how understanding these processes can be used to guide sampling protocols, fingerprint selection and data interpretation. The application of statistical approaches without consideration of how unique sediment fingerprints have developed and how robust they are within the environment is a major limitation of many recent studies. This review summarises the current information, identifies areas that need further investigation and provides recommendations for sediment fingerprinting that should be considered for adoption in future studies if the full potential and utility of the approach are to be realised.

  15. A New Approach for Fingerprint Image Compression

    Mazieres, Bertrand

    1997-12-01

    The FBI has been collecting fingerprint cards since 1924 and now has over 200 million of them. Digitized with 8 bits of grayscale resolution at 500 dots per inch, it means 2000 terabytes of information. Also, without any compression, transmitting a 10 Mb card over a 9600 baud connection will need 3 hours. Hence we need a compression and a compression as close to lossless as possible: all fingerprint details must be kept. A lossless compression usually do not give a better compression ratio than 2:1, which is not sufficient. Compressing these images with the JPEG standard leads to artefacts which appear even at low compression rates. Therefore the FBI has chosen in 1993 a scheme of compression based on a wavelet transform, followed by a scalar quantization and an entropy coding : the so-called WSQ. This scheme allows to achieve compression ratios of 20:1 without any perceptible loss of quality. The publication of the FBI specifies a decoder, which means that many parameters can be changed in the encoding process: the type of analysis/reconstruction filters, the way the bit allocation is made, the number of Huffman tables used for the entropy coding. The first encoder used 9/7 filters for the wavelet transform and did the bit allocation using a high-rate bit assumption. Since the transform is made into 64 subbands, quite a lot of bands receive only a few bits even at an archival quality compression rate of 0.75 bit/pixel. Thus, after a brief overview of the standard, we will discuss a new approach for the bit-allocation that seems to make more sense where theory is concerned. Then we will talk about some implementation aspects, particularly for the new entropy coder and the features that allow other applications than fingerprint image compression. Finally, we will compare the performances of the new encoder to those of the first encoder.

  16. Nanotag luminescent fingerprint anti-counterfeiting technology

    Radziwon, Michal Jędrzej; Rubahn, Horst-Günter; Johansen, Stefan

    2012-01-01

    We describe a method to fabricate, transfer and validate via image processing nanofibre- based, unique security marks (“nanotags”) for anti-counterfeiting purposes. Epitaxial surface growth of oligophenylenes on a heated muscovite mica crystal results in a thin film of mutually aligned nanofibres....... This fingerprint can be transferred on an adhesive tape as a label of a product, imaged using low magnification microscopy, digitalised and stored in a database. Infrared surface heating, enforced cooling and load lock transfer makes the fabrication process fast and scalable to mass production....

  17. Feline sporotrichosis: associations between clinical-epidemiological profiles and phenotypic-genotypic characteristics of the etiological agents in the Rio de Janeiro epizootic area.

    Boechat, Jéssica Sepulveda; Oliveira, Manoel Marques Evangelista; Almeida-Paes, Rodrigo; Gremião, Isabella Dib Ferreira; Machado, Ana Caroline de Sá; Oliveira, Raquel de Vasconcelos Carvalhaes; Figueiredo, Anna Barreto Fernandes; Rabello, Vanessa Brito de Souza; Silva, Karoline Benevides de Lima; Zancopé-Oliveira, Rosely Maria; Schubach, Tânia Maria Pacheco; Pereira, Sandro Antonio

    2018-03-01

    Sporotrichosis is caused by species of the genus Sporothrix. From 1998 to 2015, 4,703 cats were diagnosed at the Fundação Oswaldo Cruz (Fiocruz), Rio de Janeiro, Brazil. Even after the description of the Sporothrix species, the characterisation of feline isolates is not performed routinely. To characterise the clinical isolates from cats at the species level and correlate them with the clinical and epidemiological characteristics of the cats. Forty seven Sporothrix spp. isolates from cats assisted at Fiocruz from 2010 to 2011 were included. Medical records were consulted to obtain the clinical and epidemiological data. The isolates were identified through their morphological and physiological characteristics. T3B polymerase chain reaction (PCR) fingerprinting was used for molecular identification of the species. In phenotypic tests, 34 isolates were characterised as S. brasiliensis, one as S. schenckii and 12 as Sporothrix spp. PCR identified all isolates as S. brasiliensis. S. brasiliensis is the only etiological agent of feline sporotrichosis in Rio de Janeiro to date. None association was found between the isolates and the clinical and epidemiological data. In addition, we strongly recommend the use of molecular techniques for the identification of isolates of Sporothrix spp.

  18. The concept of a 'microstructural fingerprint' for the characterization of samples in nuclear forensic science

    Ray, I.L.F.; Schubert, A.; Wallenius, M.

    2002-01-01

    In the examination of unknown specimens of nuclear materials the primary parameter of importance is the 'Isotopic Fingerprint' of the sample, mainly the ratios of the different isotopes of U and Pu which are present. In some cases, however, where no clear isotopic signature is found, or where there is a mixture of materials present, the isotopic fingerprint alone is not sufficient for a unique identification to be made. In this paper the concept of a 'Microstructural Fingerprint' of a sample is proposed and developed, which is complementary to the 'Isotopic Fingerprint' for the characterisation of materials which are under investigation in the field of nuclear forensic science. The proposal combines the techniques of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Analysis (EDX), to define the microstructure of a suspect sample, a combination of techniques which has not been used before in nuclear forensic science. The microstructural information is particularly important in the case of powder samples, for the following reasons: 1) An essential prerequisite to an isotopic analysis, for example by Thermal Ionisation Mass Spectrometry (TIMS), is the information whether a powder sample consists of a single component, or is a mixture of several distinct components. If the material is multicomponent it must be separated and the individual components analysed separately. 2) Powder samples mainly represent precursor stages in the nuclear fuel cycle, and the microstructural analysis gives information on the production process and conditions (for example, the grain size in PuO 2 platelets produced by the calcination of oxalate precipitate, and the size and thickness distributions of the platelets themselves). 3) Powder samples can be mixed with other compounds with the deliberate intention of confusing the chemical or isotopic analysis of suspect materials. However the microstructural fingerprint of a component cannot

  19. A novel patterning control strategy based on real-time fingerprint recognition and adaptive wafer level scanner optimization

    Cekli, Hakki Ergun; Nije, Jelle; Ypma, Alexander; Bastani, Vahid; Sonntag, Dag; Niesing, Henk; Zhang, Linmiao; Ullah, Zakir; Subramony, Venky; Somasundaram, Ravin; Susanto, William; Matsunobu, Masazumi; Johnson, Jeff; Tabery, Cyrus; Lin, Chenxi; Zou, Yi

    2018-03-01

    In addition to lithography process and equipment induced variations, processes like etching, annealing, film deposition and planarization exhibit variations, each having their own intrinsic characteristics and leaving an effect, a `fingerprint', on the wafers. With ever tighter requirements for CD and overlay, controlling these process induced variations is both increasingly important and increasingly challenging in advanced integrated circuit (IC) manufacturing. For example, the on-product overlay (OPO) requirement for future nodes is approaching process induced variance to become extremely small. Process variance control is seen as an bottleneck to further shrink which drives the need for more sophisticated process control strategies. In this context we developed a novel `computational process control strategy' which provides the capability of proactive control of each individual wafer with aim to maximize the yield, without introducing a significant impact on metrology requirements, cycle time or productivity. The complexity of the wafer process is approached by characterizing the full wafer stack building a fingerprint library containing key patterning performance parameters like Overlay, Focus, etc. Historical wafer metrology is decomposed into dominant fingerprints using Principal Component Analysis. By associating observed fingerprints with their origin e.g. process steps, tools and variables, we can give an inline assessment of the strength and origin of the fingerprints on every wafer. Once the fingerprint library is established, a wafer specific fingerprint correction recipes can be determined based on its processing history. Data science techniques are used in real-time to ensure that the library is adaptive. To realize this concept, ASML TWINSCAN scanners play a vital role with their on-board full wafer detection and exposure correction capabilities. High density metrology data is created by the scanner for each wafer and on every layer during the

  20. Method for modeling post-mortem biometric 3D fingerprints

    Rajeev, Srijith; Shreyas, Kamath K. M.; Agaian, Sos S.

    2016-05-01

    Despite the advancements of fingerprint recognition in 2-D and 3-D domain, authenticating deformed/post-mortem fingerprints continue to be an important challenge. Prior cleansing and reconditioning of the deceased finger is required before acquisition of the fingerprint. The victim's finger needs to be precisely and carefully operated by a medium to record the fingerprint impression. This process may damage the structure of the finger, which subsequently leads to higher false rejection rates. This paper proposes a non-invasive method to perform 3-D deformed/post-mortem finger modeling, which produces a 2-D rolled equivalent fingerprint for automated verification. The presented novel modeling method involves masking, filtering, and unrolling. Computer simulations were conducted on finger models with different depth variations obtained from Flashscan3D LLC. Results illustrate that the modeling scheme provides a viable 2-D fingerprint of deformed models for automated verification. The quality and adaptability of the obtained unrolled 2-D fingerprints were analyzed using NIST fingerprint software. Eventually, the presented method could be extended to other biometric traits such as palm, foot, tongue etc. for security and administrative applications.

  1. 8 CFR 236.5 - Fingerprints and photographs.

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Fingerprints and photographs. 236.5 Section... to Order of Removal § 236.5 Fingerprints and photographs. Every alien 14 years of age or older... photographs shall be made available to Federal, State, and local law enforcement agencies upon request to the...

  2. Teaching DNA Fingerprinting using a Hands-on Simulation.

    Schug, Thatcher

    1998-01-01

    Presents an inexpensive hands-on lesson in DNA fingerprinting that can be completed in a single class period. Involves students in solving a murder in which a drop of blood is fingerprinted and matched with the blood of the murderer. (DDR)

  3. Distortion Estimation in Compressed Music Using Only Audio Fingerprints

    Doets, P.J.O.; Lagendijk, R.L.

    2008-01-01

    An audio fingerprint is a compact yet very robust representation of the perceptually relevant parts of an audio signal. It can be used for content-based audio identification, even when the audio is severely distorted. Audio compression changes the fingerprint slightly. We show that these small

  4. Rotation-invariant fingerprint matching using radon and DCT

    Sangita Bharkad

    2017-11-20

    Nov 20, 2017 ... [6] Bazen A and Gerez S 2003 Fingerprint matching by thin- plate spline modeling of elastic deformations. Pattern. Recogn. 36(8): 1859–1867. [7] Jain A, Hong L and Bolle R 1997 On-line fingerprint veri- fication. IEEE Trans.

  5. DNA Fingerprinting Using PCR: A Practical Forensic Science Activity

    Choi, Hyun-Jung; Ahn, Jung Hoon; Ko, Minsu

    2008-01-01

    This paper describes a forensic science simulation programme applicable for use in colleges. Students were asked to find a putative suspect by DNA fingerprinting using a simple protocol developed in this study. DNA samples were obtained from a hair root and a drop of blood, common sources of DNA in forensic science. The DNA fingerprinting protocol…

  6. Fingerprint Recognition using Fuzzy Logic with Triangular Pattern Template

    Hussain, Dil Muhammad Akbar

    2006-01-01

    A fingerprint is a pattern of ridges and valleys that exist on the surface of the finger. The uniqueness of a fingerprint is typically determined by the overall pattern of ridges and valleys as well as the local ridge structures e.g., a ridge bifurcation or a ridge ending, which are called minutiae...

  7. dna and seed proteins fingerprinting of egyptian crop plants

    Dr. Haddad

    2012-11-01

    Nov 1, 2012 ... combinations were used for fingerprinting six cultivars which belongs to barley, rice and wheat cultivars leading to the production of numerous AFLP bands, 300 of them were polymorphic. Thirty SSR markers were obtained from fingerprinting eight cultivars belonging to the five studied species using 11.

  8. Friction ridge skin - Automated Fingerprint Identification System (AFIS)

    Meuwly, Didier

    2013-01-01

    This contribution describes the development and the forensic use of automated fingerprint identification systems (AFISs). AFISs were initially developed in order to overcome the limitations of the paper-based fingerprint collections, by digitizing the ten-print cards in computerized databases and to

  9. Utilizing AFIS searching tools to reduce errors in fingerprint casework.

    Langenburg, Glenn; Hall, Carey; Rosemarie, Quincy

    2015-12-01

    Fifty-six (56) adjudicated, property crime cases involving fingerprint evidence were reviewed using a case-specific AFIS database tool. This tool allowed fingerprint experts to search latent prints in the cases against a database of friction ridge exemplars limited to only the individuals specific to that particular case. We utilized three different methods to encode and search the latent prints: automatic feature extraction, manual encoding performed by a student intern, and manual encoding performed by a fingerprint expert. Performance in the study was strongest when the encoding was conducted by the fingerprint expert. The results of the study showed that while the AFIS tools failed to locate all of the identifications originally reported by the initial fingerprint expert that worked the case, the AFIS tools helped to identify 7 additional latent prints that were not reported by the initial fingerprint expert. We conclude that this technology, when combined with fingerprint expertise, will reduce the number of instances where an erroneous exclusion could occur, increase the efficiency of a fingerprint unit, and be a useful tool for reviewing active or cold cases for missed opportunities to report identifications. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Study of noninvasive detection of latent fingerprints using UV laser

    Li, Hong-xia; Cao, Jing; Niu, Jie-qing; Huang, Yun-gang; Mao, Lin-jie; Chen, Jing-rong

    2011-06-01

    Latent fingerprints present a considerable challenge in forensics, and noninvasive procedure that captures a digital image of the latent fingerprints is significant in the field of criminal investigation. The capability of photography technologies using 266nm UV Nd:YAG solid state laser as excitation light source to provide detailed images of unprocessed latent fingerprints is demonstrated. Unprocessed latent fingerprints were developed on various non-absorbent and absorbing substrates. According to the special absorption, reflection, scattering and fluorescence characterization of the various residues in fingerprints (fatty acid ester, protein, and carbosylic acid salts etc) to the UV light to weaken or eliminate the background disturbance and increase the brightness contrast of fingerprints with the background, and using 266nm UV laser as excitation light source, fresh and old latent fingerprints on the surface of four types of non-absorbent objects as magazine cover, glass, back of cellphone, wood desktop paintwork and two types of absorbing objects as manila envelope, notebook paper were noninvasive detected and appeared through reflection photography and fluorescence photography technologies, and the results meet the fingerprint identification requirements in forensic science.

  11. Algorithmic strategies for adapting to environmental changes in 802.11 location fingerprinting

    Hansen, Rene; Wind, Rico; Jensen, Christian S.

    2010-01-01

    Ubiquitous and accurate indoor positioning represents a key capability of an infrastructure that enables indoor location-based services. At the same time, such positioning has yet to be achieved. Much research uses commercial, off-the-shelf 802.11 (Wi-Fi) hardware for indoor positioning. In parti......Ubiquitous and accurate indoor positioning represents a key capability of an infrastructure that enables indoor location-based services. At the same time, such positioning has yet to be achieved. Much research uses commercial, off-the-shelf 802.11 (Wi-Fi) hardware for indoor positioning....... In particular, the dominant fingerprinting technique uses a database (called a radio map) of manually collected Wi-Fi signal strengths and is able to achieve positioning accuracies that enable a wide range of location-based services. However, a major weakness of fingerprinting occurs when changes occur...

  12. DNA fingerprinting approaches to trace Escherichia coli sharing between dogs and owners.

    Naziri, Z; Derakhshandeh, A; Firouzi, R; Motamedifar, M; Shojaee Tabrizi, A

    2016-02-01

    To determine the prevalence of cross-species sharing of Escherichia coli between healthy dogs and humans living in the same household. Two faecal E. coli isolates from 25 healthy dog-owner pairs and 16 healthy control humans were tested using three fingerprinting methods. The prevalence of within-household sharing of E. coli was 4, 8 and 8% using pulsed-field gel electrophoresis, randomly amplified polymorphic DNA and enterobacterial repetitive intergenic consensus-PCR analyses respectively. Within-household bacterial sharing was more prevalent than across-household sharing (P fingerprinting techniques will help to find ways for reducing the economic impact of E. coli infections. This study support claims that public health concerns regarding the cross-species sharing of E. coli are warranted but this risk is minimal. © 2015 The Society for Applied Microbiology.

  13. [HPLC characteristic fingerprints of sedi linearis herba and sedi herba].

    Lu, Lan-Qing; Mei, Qing; Wan, Ding-Rong; Yang, Xin-Zhou; Qiao, Shu; Zhao, Yu-Dan

    2014-04-01

    To study HPLC characteristic fingerprint of Sedum lineare from different harvest periods, and to compare with its related species Sedum sarmentosum. The HPLC fingerprints of Sedum lineare from different collecting periods were established and compared with Sedum sarmentosum by the same detection method. Hyperin, isoquercitrin and astragaloside were identified from the HPLC fingerprint of Sedum lineare. The fingerprint of Sedum lineare growing in the same area but different environment were basically identical; while there were remarkable differences of Sedum lineare growing in the same place but from different harvest periods, with the area of most common peaks changing from little to great, and slightly different peak number. The HPLC fingerprint of the two Sedum species had four common peaks, but could be distinguished from each other. The optimal harvest period of these two species should be full-bloom stage. The established method can provide reference for identification and quality analysis of Sedum lineare.

  14. Optical Methods in Fingerprint Imaging for Medical and Personality Applications

    Chia-Nan Wang

    2017-10-01

    Full Text Available Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the “Big Five” personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs.

  15. Optical Methods in Fingerprint Imaging for Medical and Personality Applications

    Wang, Jing-Wein; Lin, Ming-Hsun; Chang, Yao-Lang; Kuo, Chia-Ming

    2017-01-01

    Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the “Big Five” personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs. PMID:29065556

  16. Identification and Quality Assessment of Chrysanthemum Buds by CE Fingerprinting

    Xiaoping Xing

    2015-01-01

    Full Text Available A simple and efficient fingerprinting method for chrysanthemum buds was developed with the aim of establishing a quality control protocol based on biochemical makeup. Chrysanthemum bud samples were successively extracted by water and alcohol. The fingerprints of the chrysanthemum buds samples were obtained using capillary electrophoresis and electrochemical detection (CE-ED employing copper and carbon working electrodes to capture all of the chemical information. 10 batches of chrysanthemum buds were collected from different regions and various factories to establish the baseline fingerprint. The experimental data of 10 batches electropherogram buds by CE were analyzed by correlation coefficient and the included angle cosine methods. A standard chrysanthemum bud fingerprint including 24 common peaks was established, 12 from each electrode, which was successfully applied to identify and distinguish between chrysanthemum buds from 2 other chrysanthemum species. These results demonstrate that fingerprint analysis can be used as an important criterion for chrysanthemum buds quality control.

  17. [Studies on fingerprinting of Flos Buddleja by RP-HPLC].

    Han, Peng; Cui, Ya-jun; Guo, Hong-zhu; Guo, De-an

    2004-10-01

    To establish fingerprinting of Flos Buddleja by using RP-HPLC for the quality control. The HPLC condition was as follows: Inertsil ODS-3 C18 analytical column (4.6 mm x 250 mm, 5 microm), gredient eluation with MeCN (0.1% TFA)-H2O (0.1%TFA), flow rate 1.0 mL x min(-1), detection wavelength 254 nm. 10 commercial samples were analyzed to establish a fingerprinting. Among the obtained fingerprinting, most of the detected peaks were separated effectively. The accuracy, repeatability and stability of this method were satisfied. The RSDs of relative retention time and area of aimed peaks which existed in all samples wereless than 5%. Theresults were in accordance with the request of fingerprinting. The established fingerprinting can be used for the quality control of Flos Buddleja.

  18. Optical Methods in Fingerprint Imaging for Medical and Personality Applications.

    Wang, Chia-Nan; Wang, Jing-Wein; Lin, Ming-Hsun; Chang, Yao-Lang; Kuo, Chia-Ming

    2017-10-23

    Over the years, analysis and induction of personality traits has been a topic for individual subjective conjecture or speculation, rather than a focus of inductive scientific analysis. This study proposes a novel framework for analysis and induction of personality traits. First, 14 personality constructs based on the "Big Five" personality factors were developed. Next, a new fingerprint image algorithm was used for classification, and the fingerprints were classified into eight types. The relationship between personality traits and fingerprint type was derived from the results of the questionnaire survey. After comparison of pre-test and post-test results, this study determined the induction ability of personality traits from fingerprint type. Experimental results showed that the left/right thumbprint type of a majority of subjects was left loop/right loop and that the personalities of individuals with this fingerprint type were moderate with no significant differences in the 14 personality constructs.

  19. RIO Country Report 2015

    Grimpe, Christoph; Mitchell, Jessica

    The 2015 series of RIO Country Reports analyse and assess the policy and the national research and innovation system developments in relation to national policy priorities and the EU policy agenda with special focus on ERA and Innovation Union. The executive summaries of these reports put forward...

  20. A Framework for Reproducible Latent Fingerprint Enhancements.

    Carasso, Alfred S

    2014-01-01

    Photoshop processing of latent fingerprints is the preferred methodology among law enforcement forensic experts, but that appproach is not fully reproducible and may lead to questionable enhancements. Alternative, independent, fully reproducible enhancements, using IDL Histogram Equalization and IDL Adaptive Histogram Equalization, can produce better-defined ridge structures, along with considerable background information. Applying a systematic slow motion smoothing procedure to such IDL enhancements, based on the rapid FFT solution of a Lévy stable fractional diffusion equation, can attenuate background detail while preserving ridge information. The resulting smoothed latent print enhancements are comparable to, but distinct from, forensic Photoshop images suitable for input into automated fingerprint identification systems, (AFIS). In addition, this progressive smoothing procedure can be reexamined by displaying the suite of progressively smoother IDL images. That suite can be stored, providing an audit trail that allows monitoring for possible loss of useful information, in transit to the user-selected optimal image. Such independent and fully reproducible enhancements provide a valuable frame of reference that may be helpful in informing, complementing, and possibly validating the forensic Photoshop methodology.

  1. Node fingerprinting: an efficient heuristic for aligning biological networks.

    Radu, Alex; Charleston, Michael

    2014-10-01

    With the continuing increase in availability of biological data and improvements to biological models, biological network analysis has become a promising area of research. An emerging technique for the analysis of biological networks is through network alignment. Network alignment has been used to calculate genetic distance, similarities between regulatory structures, and the effect of external forces on gene expression, and to depict conditional activity of expression modules in cancer. Network alignment is algorithmically complex, and therefore we must rely on heuristics, ideally as efficient and accurate as possible. The majority of current techniques for network alignment rely on precomputed information, such as with protein sequence alignment, or on tunable network alignment parameters, which may introduce an increased computational overhead. Our presented algorithm, which we call Node Fingerprinting (NF), is appropriate for performing global pairwise network alignment without precomputation or tuning, can be fully parallelized, and is able to quickly compute an accurate alignment between two biological networks. It has performed as well as or better than existing algorithms on biological and simulated data, and with fewer computational resources. The algorithmic validation performed demonstrates the low computational resource requirements of NF.

  2. Metabolic fingerprint of Gestational Diabetes Mellitus.

    Dudzik, Danuta; Zorawski, Marcin; Skotnicki, Mariusz; Zarzycki, Wieslaw; Kozlowska, Gabryela; Bibik-Malinowska, Katarzyna; Vallejo, María; García, Antonia; Barbas, Coral; Ramos, M Pilar

    2014-05-30

    Gestational Diabetes (GDM) is causing severe short- and long-term complications for mother, fetus or neonate. As yet, the metabolic alterations that are specific for the development of GDM have not been fully determined, which also precludes the early diagnosis and prognosis of this pathology. In this pilot study, we determine the metabolic fingerprint, using a multiplatform LC-QTOF/MS, GC-Q/MS and CE-TOF/MS system, of plasma and urine samples of 20 women with GDM and 20 with normal glucose tolerance in the second trimester of pregnancy. Plasma fingerprints allowed for the discrimination of GDM pregnant women from controls. In particular, lysoglycerophospholipids showed a close association with the glycemic state of the women. In addition, we identified some metabolites with a strong discriminative power, such as LPE(20:1), (20:2), (22:4); LPC(18:2), (20:4), (20:5); LPI(18:2), (20:4); LPS(20:0) and LPA(18:2), as well as taurine-bile acids and long-chain polyunsaturated fatty acid derivatives. Finally, we provide evidence for the implication of these compounds in metabolic routes, indicative of low-grade inflammation and altered redox-balance, that may be related with the specific pathophysiological context of the genesis of GDM. This highlights their potential use as prognostic markers for the identification of women at risk to develop severe glucose intolerance during pregnancy. Gestational Diabetes Mellitus (GDM) is increasing worldwide and, although diabetes usually remits after pregnancy, women with GDM have a high risk of developing postpartum type 2-diabetes, particularly when accompanied by obesity. Therefore, understanding the pathophysiology of GDM, as well as the identification of potentially modifiable risk factors and early diagnostic markers for GDM are relevant issues. In the present study, we devised a multiplatform metabolic fingerprinting approach to obtain a comprehensive picture of the early metabolic alternations that occur in GDM, and may

  3. The Noble Gas Fingerprint in a UK Unconventional Gas Reservoir

    McKavney, Rory; Gilfillan, Stuart; Györe, Domokos; Stuart, Fin

    2016-04-01

    In the last decade, there has been an unprecedented expansion in the development of unconventional hydrocarbon resources. Concerns have arisen about the effect of this new industry on groundwater quality, particularly focussing on hydraulic fracturing, the technique used to increase the permeability of the targeted tight shale formations. Methane contamination of groundwater has been documented in areas of gas production1 but conclusively linking this to fugitive emissions from unconventional hydrocarbon production has been controversial2. A lack of baseline measurements taken before drilling, and the equivocal interpretation of geochemical data hamper the determination of possible contamination. Common techniques for "fingerprinting" gas from discrete sources rely on gas composition and isotopic ratios of elements within hydrocarbons (e.g. δ13CCH4), but the original signatures can be masked by biological and gas transport processes. The noble gases (He, Ne, Ar, Kr, Xe) are inert and controlled only by their physical properties. They exist in trace quantities in natural gases and are sourced from 3 isotopically distinct environments (atmosphere, crust and mantle)3. They are decoupled from the biosphere, and provide a separate toolbox to investigate the numerous sources and migration pathways of natural gases, and have found recent utility in the CCS4 and unconventional gas5 industries. Here we present a brief overview of noble gas data obtained from a new coal bed methane (CBM) field, Central Scotland. We show that the high concentration of helium is an ideal fingerprint for tracing fugitive gas migration to a shallow groundwater. The wells show variation in the noble gas signatures that can be attributed to differences in formation water pumping from the coal seams as the field has been explored for future commercial development. Dewatering the seams alters the gas/water ratio and the degree to which noble gases degas from the formation water. Additionally the

  4. An Investigation on the Problem of Thinning in Fingerprint Processing

    I. O. Omeiza

    2012-06-01

    Full Text Available A high-integrity thinning procedure for binarised fingerprints is proposed in this paper. Several authors and software developers have approached the thinning problems in fingerprint-processing differently. Their approach produced in most cases, fingerprint skeletons with low reliability and thus require additional minutiae-pruning stage to discard the erroneous minutiae in the obtained skeletons. The work involves a careful blending of some already existing algorithms to achieve optimal performance in thinning binarised fingerprint images. The algorithms considered are as follows. The "Zhang and Suen" parallel algorithm for thinning digital patterns, the improved parallel thinning algorithm by Holt and company and template-based thinning algorithm by Stentiford and Mortimer. The idea of combining these stand-alone algorithms to improve the quality of obtained objects skeleton in general image processing was first suggested in a text by Parker in 1998. However, his work does not specifically address the fingerprint problem. This work has examined and proves the plausibility of this thinning approach in the particular case of fingerprint application domain. The thinning procedure obtained satisfactory skeletons for fingerprint applications.

  5. Missing data reconstruction using Gaussian mixture models for fingerprint images

    Agaian, Sos S.; Yeole, Rushikesh D.; Rao, Shishir P.; Mulawka, Marzena; Troy, Mike; Reinecke, Gary

    2016-05-01

    Publisher's Note: This paper, originally published on 25 May 2016, was replaced with a revised version on 16 June 2016. If you downloaded the original PDF, but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. One of the most important areas in biometrics is matching partial fingerprints in fingerprint databases. Recently, significant progress has been made in designing fingerprint identification systems for missing fingerprint information. However, a dependable reconstruction of fingerprint images still remains challenging due to the complexity and the ill-posed nature of the problem. In this article, both binary and gray-level images are reconstructed. This paper also presents a new similarity score to evaluate the performance of the reconstructed binary image. The offered fingerprint image identification system can be automated and extended to numerous other security applications such as postmortem fingerprints, forensic science, investigations, artificial intelligence, robotics, all-access control, and financial security, as well as for the verification of firearm purchasers, driver license applicants, etc.

  6. Detection and analysis of diamond fingerprinting feature and its application

    Li Xin; Huang Guoliang; Li Qiang; Chen Shengyi, E-mail: tshgl@tsinghua.edu.cn [Department of Biomedical Engineering, the School of Medicine, Tsinghua University, Beijing, 100084 (China)

    2011-01-01

    Before becoming a jewelry diamonds need to be carved artistically with some special geometric features as the structure of the polyhedron. There are subtle differences in the structure of this polyhedron in each diamond. With the spatial frequency spectrum analysis of diamond surface structure, we can obtain the diamond fingerprint information which represents the 'Diamond ID' and has good specificity. Based on the optical Fourier Transform spatial spectrum analysis, the fingerprinting identification of surface structure of diamond in spatial frequency domain was studied in this paper. We constructed both the completely coherent diamond fingerprinting detection system illuminated by laser and the partially coherent diamond fingerprinting detection system illuminated by led, and analyzed the effect of the coherence of light source to the diamond fingerprinting feature. We studied rotation invariance and translation invariance of the diamond fingerprinting and verified the feasibility of real-time and accurate identification of diamond fingerprint. With the profit of this work, we can provide customs, jewelers and consumers with a real-time and reliable diamonds identification instrument, which will curb diamond smuggling, theft and other crimes, and ensure the healthy development of the diamond industry.

  7. Studies on Chromatographic Fingerprint and Fingerprinting Profile-Efficacy Relationship of Polygoni Perfoliati Herba

    Li Tian

    2013-01-01

    Full Text Available Polygoni Perfoliati Herba is widely used in China with antibacterium, anti-inflammatory, expectorant, antitumor, and antivirus activities. To reveal the mechanisms of the activities of Polygoni Perfoliati Herba, the relationship between the fingerprinting profile and its bioactivities was investigated. In the present study, high-performance liquid chromatographic (HPLC fingerprinting method was developed. The established method was applied to analyze 51 batches of Polygoni Perfoliati Herba samples collected from different locations or in different harvesting times in China. Chemometrics, including similarity analysis, hierarchical clustering analysis, and principal component analysis, were used to express their similarities. It was found that similarity values of the samples were in the range of 0.432–0.998. The results of analgesic tests indicated that Polygoni Perfoliati Herba could significantly inhibit pain induced by hot plate and acetic acid in mice. The results of anti-inflammatory tests showed that Polygoni Perfoliati Herba had good anti-inflammatory effects (P < 0.01 in two models including dimethyl benzene-induced ear edema and acetic acid-induced peritoneal permeability in mice. Combining the results from chromatographic fingerprints with those from bioactivities, we found that seven peaks from Polygoni Perfoliati Herba were mainly responsible for analgesic and anti-inflammatory activities.

  8. The Ins and Outs of DNA Fingerprinting the Infectious Fungi

    Soll, David R.

    2000-01-01

    DNA fingerprinting methods have evolved as major tools in fungal epidemiology. However, no single method has emerged as the method of choice, and some methods perform better than others at different levels of resolution. In this review, requirements for an effective DNA fingerprinting method are proposed and procedures are described for testing the efficacy of a method. In light of the proposed requirements, the most common methods now being used to DNA fingerprint the infectious fungi are described and assessed. These methods include restriction fragment length polymorphisms (RFLP), RFLP with hybridization probes, randomly amplified polymorphic DNA and other PCR-based methods, electrophoretic karyotyping, and sequencing-based methods. Procedures for computing similarity coefficients, generating phylogenetic trees, and testing the stability of clusters are then described. To facilitate the analysis of DNA fingerprinting data, computer-assisted methods are described. Finally, the problems inherent in the collection of test and control isolates are considered, and DNA fingerprinting studies of strain maintenance during persistent or recurrent infections, microevolution in infecting strains, and the origin of nosocomial infections are assessed in light of the preceding discussion of the ins and outs of DNA fingerprinting. The intent of this review is to generate an awareness of the need to verify the efficacy of each DNA fingerprinting method for the level of genetic relatedness necessary to answer the epidemiological question posed, to use quantitative methods to analyze DNA fingerprint data, to use computer-assisted DNA fingerprint analysis systems to analyze data, and to file data in a form that can be used in the future for retrospective and comparative studies. PMID:10756003

  9. Disease state fingerprint for fall risk assessment.

    Similä, Heidi; Immonen, Milla

    2014-01-01

    Fall prevention is an important and complex multifactorial challenge, since one third of people over 65 years old fall at least once every year. A novel application of Disease State Fingerprint (DSF) algorithm is presented for holistic visualization of fall risk factors and identifying persons with falls history or decreased level of physical functioning based on fall risk assessment data. The algorithm is tested with data from 42 older adults, that went through a comprehensive fall risk assessment. Within the study population the Activities-specific Balance Confidence (ABC) scale score, Berg Balance Scale (BBS) score and the number of drugs in use were the three most relevant variables, that differed between the fallers and non-fallers. This study showed that the DSF visualization is beneficial in inspection of an individual's significant fall risk factors, since people have problems in different areas and one single assessment scale is not enough to expose all the people at risk.

  10. Ferroelastic Fingerprints in Methylammonium Lead Iodide Perovskite

    Hermes, Ilka M.

    2016-02-12

    Methylammonium lead iodide (MAPbI3) perovskite materials show an outstanding performance in photovoltaic devices. However, certain material properties, especially the possible ferroic behavior, remain unclear. We observed distinct nanoscale periodic domains in the piezoresponse of MAPbI3(Cl) grains. The structure and the orientation of these striped domains indicate ferroelasticity as their origin. By correlating vertical and lateral piezoresponse force microscopy experiments performed at different sample orientations with x-ray diffraction, the preferred domain orientation was suggested to be the a1-a2-phase. The observation of these ferroelastic fingerprints appears to strongly depend on the film texture and thus the preparation route. The formation of the ferroelastic twin domains could be induced by internal strain during the cubic-tetragonal phase transition.

  11. Experimental quantum fingerprinting with weak coherent pulses

    Xu, Feihu; Arrazola, Juan Miguel; Wei, Kejin; Wang, Wenyuan; Palacios-Avila, Pablo; Feng, Chen; Sajeed, Shihan; Lütkenhaus, Norbert; Lo, Hoi-Kwong

    2015-10-01

    Quantum communication holds the promise of creating disruptive technologies that will play an essential role in future communication networks. For example, the study of quantum communication complexity has shown that quantum communication allows exponential reductions in the information that must be transmitted to solve distributed computational tasks. Recently, protocols that realize this advantage using optical implementations have been proposed. Here we report a proof-of-concept experimental demonstration of a quantum fingerprinting system that is capable of transmitting less information than the best-known classical protocol. Our implementation is based on a modified version of a commercial quantum key distribution system using off-the-shelf optical components over telecom wavelengths, and is practical for messages as large as 100 Mbits, even in the presence of experimental imperfections. Our results provide a first step in the development of experimental quantum communication complexity.

  12. Experimental quantum fingerprinting with weak coherent pulses

    Xu, Feihu; Arrazola, Juan Miguel; Wei, Kejin; Wang, Wenyuan; Palacios-Avila, Pablo; Feng, Chen; Sajeed, Shihan; Lütkenhaus, Norbert; Lo, Hoi-Kwong

    2015-01-01

    Quantum communication holds the promise of creating disruptive technologies that will play an essential role in future communication networks. For example, the study of quantum communication complexity has shown that quantum communication allows exponential reductions in the information that must be transmitted to solve distributed computational tasks. Recently, protocols that realize this advantage using optical implementations have been proposed. Here we report a proof-of-concept experimental demonstration of a quantum fingerprinting system that is capable of transmitting less information than the best-known classical protocol. Our implementation is based on a modified version of a commercial quantum key distribution system using off-the-shelf optical components over telecom wavelengths, and is practical for messages as large as 100 Mbits, even in the presence of experimental imperfections. Our results provide a first step in the development of experimental quantum communication complexity. PMID:26515586

  13. Oyster polynuclear aromatic hydrocarbon fingerprinting applied to the Apex barge oil spill

    Wade, T.L.; Jackson, T.J.; McDonald, T.J.; Sericano, J.L.; Brooks, J.M.

    1993-01-01

    An estimated 692,000 gallons of catalytic feed stock oil was spilled into Galveston Bay on July 28, 1990, when a tanker collided with three Apex barges in the Houston Ship Channel. Oysters were collected and analyzed from Galveston Bay Todd's Dump (GBRD) before the spill and after the spill. Oysters were also collected from Galveston Bay Redfish Island (GBRI), a site known to be impacted by the spill, 37 and 110 days after the spill. The spilled oil was also analyzed. The concentration of 18 polynuclear aromatic hydrocarbons (PAH) measured as part of the National Oceanic and Atmospheric Administration's National Status ampersand Trends (NS ampersand T) showed a sharp increase from 100 ng/g to over 600 ng/g. Concentrations of these 18 PAHs were also found at GBRI. Fingerprinting techniques applied to data from oyster analyses demonstrated the presence of bioavailable Apex Barge oil 37, 110, and 132 days after the spill at GHTD and GBRI. Fingerprinting becomes less diagnostic with time due to possible environmental weathering of the oil. The fingerprint from GBTD 495 and 851 days after the spill will be presented and discussed

  14. Chemometrics and chromatographic fingerprints to classify plant food supplements according to the content of regulated plants.

    Deconinck, E; Sokeng Djiogo, C A; Courselle, P

    2017-09-05

    Plant food supplements are gaining popularity, resulting in a broader spectrum of available products and an increased consumption. Next to the problem of adulteration of these products with synthetic drugs the presence of regulated or toxic plants is an important issue, especially when the products are purchased from irregular sources. This paper focusses on this problem by using specific chromatographic fingerprints for five targeted plants and chemometric classification techniques in order to extract the important information from the fingerprints and determine the presence of the targeted plants in plant food supplements in an objective way. Two approaches were followed: (1) a multiclass model, (2) 2-class model for each of the targeted plants separately. For both approaches good classification models were obtained, especially when using SIMCA and PLS-DA. For each model, misclassification rates for the external test set of maximum one sample could be obtained. The models were applied to five real samples resulting in the identification of the correct plants, confirmed by mass spectrometry. Therefore chromatographic fingerprinting combined with chemometric modelling can be considered interesting to make a more objective decision on whether a regulated plant is present in a plant food supplement or not, especially when no mass spectrometry equipment is available. The results suggest also that the use of a battery of 2-class models to screen for several plants is the approach to be preferred. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. In vivo metabolic fingerprinting of neutral lipids with hyperspectral stimulated Raman scattering microscopy.

    Fu, Dan; Yu, Yong; Folick, Andrew; Currie, Erin; Farese, Robert V; Tsai, Tsung-Huang; Xie, Xiaoliang Sunney; Wang, Meng C

    2014-06-18

    Metabolic fingerprinting provides valuable information on the physiopathological states of cells and tissues. Traditional imaging mass spectrometry and magnetic resonance imaging are unable to probe the spatial-temporal dynamics of metabolites at the subcellular level due to either lack of spatial resolution or inability to perform live cell imaging. Here we report a complementary metabolic imaging technique that is based on hyperspectral stimulated Raman scattering (hsSRS). We demonstrated the use of hsSRS imaging in quantifying two major neutral lipids: cholesteryl ester and triacylglycerol in cells and tissues. Our imaging results revealed previously unknown changes of lipid composition associated with obesity and steatohepatitis. We further used stable-isotope labeling to trace the metabolic dynamics of fatty acids in live cells and live Caenorhabditis elegans with hsSRS imaging. We found that unsaturated fatty acid has preferential uptake into lipid storage while saturated fatty acid exhibits toxicity in hepatic cells. Simultaneous metabolic fingerprinting of deuterium-labeled saturated and unsaturated fatty acids in living C. elegans revealed that there is a lack of interaction between the two, unlike previously hypothesized. Our findings provide new approaches for metabolic tracing of neutral lipids and their precursors in living cells and organisms, and could potentially serve as a general approach for metabolic fingerprinting of other metabolites.

  16. Quality Evaluation of Potentilla fruticosa L. by High Performance Liquid Chromatography Fingerprinting Associated with Chemometric Methods.

    Liu, Wei; Wang, Dongmei; Liu, Jianjun; Li, Dengwu; Yin, Dongxue

    2016-01-01

    The present study was performed to assess the quality of Potentilla fruticosa L. sampled from distinct regions of China using high performance liquid chromatography (HPLC) fingerprinting coupled with a suite of chemometric methods. For this quantitative analysis, the main active phytochemical compositions and the antioxidant activity in P. fruticosa were also investigated. Considering the high percentages and antioxidant activities of phytochemicals, P. fruticosa samples from Kangding, Sichuan were selected as the most valuable raw materials. Similarity analysis (SA) of HPLC fingerprints, hierarchical cluster analysis (HCA), principle component analysis (PCA), and discriminant analysis (DA) were further employed to provide accurate classification and quality estimates of P. fruticosa. Two principal components (PCs) were collected by PCA. PC1 separated samples from Kangding, Sichuan, capturing 57.64% of the variance, whereas PC2 contributed to further separation, capturing 18.97% of the variance. Two kinds of discriminant functions with a 100% discrimination ratio were constructed. The results strongly supported the conclusion that the eight samples from different regions were clustered into three major groups, corresponding with their morphological classification, for which HPLC analysis confirmed the considerable variation in phytochemical compositions and that P. fruticosa samples from Kangding, Sichuan were of high quality. The results of SA, HCA, PCA, and DA were in agreement and performed well for the quality assessment of P. fruticosa. Consequently, HPLC fingerprinting coupled with chemometric techniques provides a highly flexible and reliable method for the quality evaluation of traditional Chinese medicines.

  17. Quality Evaluation of Potentilla fruticosa L. by High Performance Liquid Chromatography Fingerprinting Associated with Chemometric Methods

    Liu, Wei; Wang, Dongmei; Liu, Jianjun; Li, Dengwu; Yin, Dongxue

    2016-01-01

    The present study was performed to assess the quality of Potentilla fruticosa L. sampled from distinct regions of China using high performance liquid chromatography (HPLC) fingerprinting coupled with a suite of chemometric methods. For this quantitative analysis, the main active phytochemical compositions and the antioxidant activity in P. fruticosa were also investigated. Considering the high percentages and antioxidant activities of phytochemicals, P. fruticosa samples from Kangding, Sichuan were selected as the most valuable raw materials. Similarity analysis (SA) of HPLC fingerprints, hierarchical cluster analysis (HCA), principle component analysis (PCA), and discriminant analysis (DA) were further employed to provide accurate classification and quality estimates of P. fruticosa. Two principal components (PCs) were collected by PCA. PC1 separated samples from Kangding, Sichuan, capturing 57.64% of the variance, whereas PC2 contributed to further separation, capturing 18.97% of the variance. Two kinds of discriminant functions with a 100% discrimination ratio were constructed. The results strongly supported the conclusion that the eight samples from different regions were clustered into three major groups, corresponding with their morphological classification, for which HPLC analysis confirmed the considerable variation in phytochemical compositions and that P. fruticosa samples from Kangding, Sichuan were of high quality. The results of SA, HCA, PCA, and DA were in agreement and performed well for the quality assessment of P. fruticosa. Consequently, HPLC fingerprinting coupled with chemometric techniques provides a highly flexible and reliable method for the quality evaluation of traditional Chinese medicines. PMID:26890416

  18. Identification and strain differentiation of 'Bacteroides fragilis group' species and Prevotella bivia by PCR fingerprinting.

    Claros, M; Schönian, G; Gräser, Y; Montag, T; Rodloff, A C; Citron, D M; Goldstein, E J

    1995-08-01

    Using single consensus primers of genomic nucleotide sequences, PCR-generated fingerprints were used for identification and differentiation of the Bacteroides fragilis group (B. fragilis, B. thetaiotaomicron, B. ovatus, B. distasonis, B. vulgatus) and Prevotella bivia (B. bivius) by comparing the DNA profiles with those of reference strains from the American Type Culture Collection and German Culture Collection. When primed by a single primer phage M13 core sequence, intra-species specific differences and species-specific bands were detected. Using primers derived from the evolutionarily conserved tRNA gene sequence, species-specific patterns were produced. A computer program, GelManager, was used to analyze the profiles and generate dendrograms. The correlation coefficients determined from the DNA fingerprint profiles of the clinical isolates (using the M13 core primer) fell within a narrow range, reflecting a high level of homology within the species. Based on the dendrograms, strains of one species were clearly differentiated from strains of other species. For comparison, SDS-PAGE analysis of whole cell extracts was also performed to obtain protein band patterns of various strains. Because of the simplicity of the PCR fingerprinting method and the ease of performance of computerized evaluation of data, this technique is a useful method for both species and strain differentiation, as well as for characterization of Bacteroides species and Prevotella bivia.

  19. Fingerprints of flower absolutes using supercritical fluid chromatography hyphenated with high resolution mass spectrometry.

    Santerre, Cyrille; Vallet, Nadine; Touboul, David

    2018-06-02

    Supercritical fluid chromatography hyphenated with high resolution mass spectrometry (SFC-HRMS) was developed for fingerprint analysis of different flower absolutes commonly used in cosmetics field, especially in perfumes. Supercritical fluid chromatography-atmospheric pressure photoionization-high resolution mass spectrometry (SFC-APPI-HRMS) technique was employed to identify the components of the fingerprint. The samples were separated with a porous graphitic carbon (PGC) Hypercarb™ column (100 mm × 2.1 mm, 3 μm) by gradient elution using supercritical CO 2 and ethanol (0.0-20.0 min (2-30% B), 20.0-25.0 min (30% B), 25.0-26.0 min (30-2% B) and 26.0-30.0 min (2% B)) as mobile phase at a flow rate of 1.5 mL/min. In order to compare the SFC fingerprints between five different flower absolutes: Jasminum grandiflorum absolutes, Jasminum sambac absolutes, Narcissus jonquilla absolutes, Narcissus poeticus absolutes, Lavandula angustifolia absolutes from different suppliers and batches, the chemometric procedure including principal component analysis (PCA) was applied to classify the samples according to their genus and their species. Consistent results were obtained to show that samples could be successfully discriminated. Copyright © 2018 Elsevier B.V. All rights reserved.

  20. MR fingerprinting with simultaneous B1 estimation.

    Buonincontri, Guido; Sawiak, Stephen J

    2016-10-01

    MR fingerprinting (MRF) can be used for quantitative estimation of physical parameters in MRI. Here, we extend the method to incorporate B1 estimation. The acquisition is based on steady state free precession MR fingerprinting with a Cartesian trajectory. To increase the sensitivity to the B1 profile, abrupt changes in flip angle were introduced in the sequence. Slice profile and B1 effects were included in the dictionary and the results from two- and three-dimensional (3D) acquisitions were compared. Acceleration was demonstrated using retrospective undersampling in the phase encode directions of 3D data exploiting redundancy between MRF frames at the edges of k-space. Without B1 estimation, T2 and B1 were inaccurate by more than 20%. Abrupt changes in flip angle improved B1 maps. T1 and T2 values obtained with the new MRF methods agree with classical spin echo measurements and are independent of the B1 field profile. When using view sharing reconstruction, results remained accurate (error Reson Med 76:1127-1135, 2016. © 2015 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made. © 2015 The Authors Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine.

  1. ESDA®-Lite collection of DNA from latent fingerprints on documents.

    Plaza, Dane T; Mealy, Jamia L; Lane, J Nicholas; Parsons, M Neal; Bathrick, Abigail S; Slack, Donia P

    2015-05-01

    The ability to detect and non-destructively collect biological samples for DNA processing would benefit the forensic community by preserving the physical integrity of evidentiary items for more thorough evaluations by other forensic disciplines. The Electrostatic Detection Apparatus (ESDA®) was systemically evaluated for its ability to non-destructively collect DNA from latent fingerprints deposited on various paper substrates for short tandem repeat (STR) DNA profiling. Fingerprints were deposited on a variety of paper substrates that included resume paper, cotton paper, magazine paper, currency, copy paper, and newspaper. Three DNA collection techniques were performed: ESDA collection, dry swabbing, and substrate cutting. Efficacy of each collection technique was evaluated by the quantity of DNA present in each sample and the percent profile generated by each sample. Both the ESDA and dry swabbing non-destructive sampling techniques outperformed the destructive methodology of substrate cutting. A greater number of full profiles were generated from samples collected with the non-destructive dry swabbing collection technique than were generated from samples collected with the ESDA; however, the ESDA also allowed the user to visualize the area of interest while non-destructively collecting the biological material. The ability to visualize the biological material made sampling straightforward and eliminated the need for numerous, random swabbings/cuttings. Based on these results, the evaluated non-destructive ESDA collection technique has great potential for real-world forensic implementation. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  2. Chemical signature study of tupiguarani ceramic tradition from Central region of the Rio Grande do Sul state, Brazil; Estudo de assinaturas quimicas em ceramica da tradicao tupiguarani da regiao central do estado do Rio Grande do Sul, Brasil

    Bona, Irene Akemy Tomiyoshi

    2006-07-01

    In this work a model based on experimental results using chemical composition data of the pottery sherds applied to Spearmann's no parametric test, principal component analysis and discriminant analysis, was applied. The samples are soils and Tupiguarani Tradition pottery sherd from the central area of the Rio Grande do Sul State. The chemical elements , Al, Ba, Ca, Cr, Fe, K Mn, Pb, Rb, S, Si, Sr, Ti, V and Zn were determined by energy dispersive X-ray fluorescence (EDXFR) while Ce, Cu, Gd, La, Nd, Pr, Sm, Th and Y by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) techniques. Relationships among the pottery characteristics, studied sites and sherd dispersion in the several sites were proposed. Indications of chemical signature of the small pottery with function to go or not to the fire were observed. The largest dispersion is of small pottery with surface treatment no corrugated. The potteries chemical fingerprints from Ijui River, Ibicui-Vacacai Mirim River and Jacui River were verified. (author)

  3. Chemical signature study of tupiguarani ceramic tradition from Central region of the Rio Grande do Sul state, Brazil; Estudo de assinaturas quimicas em ceramica da tradicao tupiguarani da regiao central do estado do Rio Grande do Sul, Brasil

    Bona, Irene Akemy Tomiyoshi

    2006-07-01

    In this work a model based on experimental results using chemical composition data of the pottery sherds applied to Spearmann's no parametric test, principal component analysis and discriminant analysis, was applied. The samples are soils and Tupiguarani Tradition pottery sherd from the central area of the Rio Grande do Sul State. The chemical elements , Al, Ba, Ca, Cr, Fe, K Mn, Pb, Rb, S, Si, Sr, Ti, V and Zn were determined by energy dispersive X-ray fluorescence (EDXFR) while Ce, Cu, Gd, La, Nd, Pr, Sm, Th and Y by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) techniques. Relationships among the pottery characteristics, studied sites and sherd dispersion in the several sites were proposed. Indications of chemical signature of the small pottery with function to go or not to the fire were observed. The largest dispersion is of small pottery with surface treatment no corrugated. The potteries chemical fingerprints from Ijui River, Ibicui-Vacacai Mirim River and Jacui River were verified. (author)

  4. A fingerprint classification algorithm based on combination of local and global information

    Liu, Chongjin; Fu, Xiang; Bian, Junjie; Feng, Jufu

    2011-12-01

    Fingerprint recognition is one of the most important technologies in biometric identification and has been wildly applied in commercial and forensic areas. Fingerprint classification, as the fundamental procedure in fingerprint recognition, can sharply decrease the quantity for fingerprint matching and improve the efficiency of fingerprint recognition. Most fingerprint classification algorithms are based on the number and position of singular points. Because the singular points detecting method only considers the local information commonly, the classification algorithms are sensitive to noise. In this paper, we propose a novel fingerprint classification algorithm combining the local and global information of fingerprint. Firstly we use local information to detect singular points and measure their quality considering orientation structure and image texture in adjacent areas. Furthermore the global orientation model is adopted to measure the reliability of singular points group. Finally the local quality and global reliability is weighted to classify fingerprint. Experiments demonstrate the accuracy and effectivity of our algorithm especially for the poor quality fingerprint images.

  5. HPTLC Fingerprint Analysis: A Quality Control for Authentication of Herbal Phytochemicals

    Ram, Mauji; Abdin, M. Z.; Khan, M. A.; Jha, Prabhakar

    Authentication and consistent quality are the basic requirement for Indian traditional medicine (TIM), Chinese traditional herbal medicine (TCHM), and their commercial products, regardless of the kind of research conducted to modernize the TIM and TCHM. The complexities of TIM and TCHM challenge the current official quality control mode, for which only a few biochemical markers were selected for identification and quantitative assay. Referring too many unknown factors existed in TIM and TCHM, it is impossible and unnecessary to pinpoint qualitatively and quantitatively every single component contained in the herbal drug. Chromatographic fingerprint is a rational option to meet the need for more effective and powerful quality assessment to TIM and TCHM. The optimized chromatographic fingerprint is not only an alternative analytical tool for authentication, but also an approach to express the various pattern of chemical ingredients distribution in the herbal drugs and preserve such "database" for further multifaced sustainable studies. Analytical separation techniques, for example, high-performance liquid chromatography (HPLC), gas chromatography (GC) and mass spectrometry (MS) were among the most popular methods of choice used for quality control of raw material and finished herbal product. Fingerprint analysis approach using high-performance thin-layer chromatography (HPTLC) has become the most potent tool for quality control of herbal medicines because of its simplicity and reliability. It can serve as a tool for identification, authentication, and quality control of herbal drugs. In this chapter, attempts are being made to expand the use of HPTLC and at the same time create interest among prospective researcher in herbal analysis. The developed method can be used as a quality control tool for rapid authentication from a wide variety of herbal samples. Some examples demonstrated the role of fingerprinting in quality control and assessment.

  6. Attack Potential Evaluation in Desktop and Smartphone Fingerprint Sensors: Can They Be Attacked by Anyone?

    Ines Goicoechea-Telleria

    2018-01-01

    Full Text Available The use of biometrics keeps growing. Every day, we use biometric recognition to unlock our phones or to have access to places such as the gym or the office, so we rely on the security manufacturers offer when protecting our privileges and private life. It is well known that it is possible to hack into a fingerprint sensor using fake fingers made of Play-Doh and other easy-to-obtain materials but to what extent? Is this true for all users or only for specialists with a deep knowledge on biometrics? Are smartphone fingerprint sensors as reliable as desktop sensors? To answer these questions, we performed 3 separate evaluations. First, we evaluated 4 desktop fingerprint sensors of different technologies by attacking them with 7 different fake finger materials. All of them were successfully attacked by an experienced attacker. Secondly, we carried out a similar test on 5 smartphones with embedded sensors using the most successful materials, which also hacked the 5 sensors. Lastly, we gathered 15 simulated attackers with no background in biometrics to create fake fingers of several materials, and they had one week to attack the fingerprint sensors of the same 5 smartphones, with the starting point of a short video with the techniques to create them. All 5 smartphones were successfully attacked by an inexperienced attacker. This paper will provide the results achieved, as well as an analysis on the attack potential of every case. All results are given following the metrics of the standard ISO/IEC 30107-3.

  7. Microbial DNA fingerprinting of human fingerprints: dynamic colonization of fingertip microflora challenges human host inferences for forensic purposes.

    Tims, Sebastian; van Wamel, Willem; Endtz, Hubert P; van Belkum, Alex; Kayser, Manfred

    2010-09-01

    Human fingertip microflora is transferred to touched objects and may provide forensically relevant information on individual hosts, such as on geographic origins, if endogenous microbial skin species/strains would be retrievable from physical fingerprints and would carry geographically restricted DNA diversity. We tested the suitability of physical fingerprints for revealing human host information, with geographic inference as example, via microbial DNA fingerprinting. We showed that the transient exogenous fingertip microflora is frequently different from the resident endogenous bacteria of the same individuals. In only 54% of the experiments, the DNA analysis of the transient fingertip microflora allowed the detection of defined, but often not the major, elements of the resident microflora. Although we found microbial persistency in certain individuals, time-wise variation of transient and resident microflora within individuals was also observed when resampling fingerprints after 3 weeks. While microbial species differed considerably in their frequency spectrum between fingerprint samples from volunteers in Europe and southern Asia, there was no clear geographic distinction between Staphylococcus strains in a cluster analysis, although bacterial genotypes did not overlap between both continental regions. Our results, though limited in quantity, clearly demonstrate that the dynamic fingerprint microflora challenges human host inferences for forensic purposes including geographic ones. Overall, our results suggest that human fingerprint microflora is too dynamic to allow for forensic marker developments for retrieving human information.

  8. Chemical signature study of tupiguarani ceramic tradition from Central region of the Rio Grande do Sul state, Brazil

    Bona, Irene Akemy Tomiyoshi

    2006-01-01

    In this work a model based on experimental results using chemical composition data of the pottery sherds applied to Spearmann's no parametric test, principal component analysis and discriminant analysis, was applied. The samples are soils and Tupiguarani Tradition pottery sherd from the central area of the Rio Grande do Sul State. The chemical elements , Al, Ba, Ca, Cr, Fe, K Mn, Pb, Rb, S, Si, Sr, Ti, V and Zn were determined by energy dispersive X-ray fluorescence (EDXFR) while Ce, Cu, Gd, La, Nd, Pr, Sm, Th and Y by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) techniques. Relationships among the pottery characteristics, studied sites and sherd dispersion in the several sites were proposed. Indications of chemical signature of the small pottery with function to go or not to the fire were observed. The largest dispersion is of small pottery with surface treatment no corrugated. The potteries chemical fingerprints from Ijui River, Ibicui-Vacacai Mirim River and Jacui River were verified. (author)

  9. Forensic fingerprinting and source identification of the 2009 Sarnia (Ontario) oil spill.

    Wang, Zhendi; Yang, C; Yang, Z; Sun, J; Hollebone, B; Brown, C; Landriault, M

    2011-11-01

    This paper presents a case study in which integrated forensic oil fingerprinting and data interpretation techniques were used to characterize the chemical compositions and determine the source of the 2009 Sarnia (Ontario) oil spill incident. The diagnostic fingerprinting techniques include determination of hydrocarbon groups and semi-quantitative product-type screening via gas chromatography (GC), analysis of oil-characteristic biomarkers and the extended suite of parent and alkylated PAH (polycyclic aromatic hydrocarbon) homologous series via gas chromatography-mass spectrometry (GC-MS), determination and comparison of a variety of diagnostic ratios of "source-specific marker" compounds, and determination of the weathering degree of the spilled oil, and whether the spilled oil hydrocarbons have been mixed with any other "background" chemicals (biogenic and/or pyrogenic hydrocarbons). The detailed chemical fingerprinting data and results reveal the following: (1) all four samples are mixtures of diesel and lubricating oil with varying percentages of diesel to lube oil. Both samples 1460 and 1462 are majority diesel-range oil mixed with a smaller portion of lube oil. Sample 1461 contains slightly less diesel-range oil. Sample 1463 is majority lubricating-range oil. (2) The diesel in the four diesel/lube oil mixture samples was most likely the same diesel and from the same source. (3) The spill sample 1460 and the suspected-source sample 1462 have nearly identical concentrations and distribution patterns of target analytes including TPHs, n-alkane, PAHs and biomarker compounds; and have nearly identical diagnostic ratios of target compounds as well. Furthermore, a perfect "positive match" correlation line (with all normalized ratio data points falling into the straight correlation line) is clearly demonstrated. It is concluded that the spill oil water sample 1460 (#1, from the water around the vessel enclosed by a boom) matches with the suspected source sample 1462

  10. Fast dictionary generation and searching for magnetic resonance fingerprinting.

    Jun Xie; Mengye Lyu; Jian Zhang; Hui, Edward S; Wu, Ed X; Ze Wang

    2017-07-01

    A super-fast dictionary generation and searching (DGS) algorithm was developed for MR parameter quantification using magnetic resonance fingerprinting (MRF). MRF is a new technique for simultaneously quantifying multiple MR parameters using one temporally resolved MR scan. But it has a multiplicative computation complexity, resulting in a big burden of dictionary generating, saving, and retrieving, which can easily be intractable for any state-of-art computers. Based on retrospective analysis of the dictionary matching object function, a multi-scale ZOOM like DGS algorithm, dubbed as MRF-ZOOM, was proposed. MRF ZOOM is quasi-parameter-separable so the multiplicative computation complexity is broken into additive one. Evaluations showed that MRF ZOOM was hundreds or thousands of times faster than the original MRF parameter quantification method even without counting the dictionary generation time in. Using real data, it yielded nearly the same results as produced by the original method. MRF ZOOM provides a super-fast solution for MR parameter quantification.

  11. Characterization of selection effects on broiler lines using DNA fingerprinting

    GS Schmidt

    2003-05-01

    Full Text Available The objective of this study was to evaluate the effect of selection for body weight on the genetic variability and diversity in broiler lines. Two paternal broiler lines (LL and LLc were used. LL line was selected for 12 generations for growth and carcass and reproduction characteristics. The LLc line was established from LL line in 1985 and mated at random. Blood samples from six chickens per line were collected and used for molecular analysis. Also, a DNA pool was made for each line to compare effects between lines. Data were analyzed considering the collected information on the presence or absence of DNA bands. Band sharing scores were calculated using the DICE coefficient. The pattern of the 21 most representative bands was used. DNA fingerprinting (DFP showed 90.48 % of polymorphism bands for both lines. Difference between lines was not due to the presence or absence of bands, but to the frequency of such bands in each genotype. Considering that both lines had the same genetic background, changes on band frequency were probably due to selection. Selection for body weight had an effect on the band frequency as evaluated by DFP, and for this reason this technique could be used as a tool in the selection process. Results also suggest that bands 4, 5 and 19 were linked to body weight traits, and bands 9, 10, 12, 13 and 21 were linked to reproductive traits such as egg production.

  12. Sediment Source Fingerprinting of the Lake Urmia Sand Dunes.

    Ahmady-Birgani, Hesam; Agahi, Edris; Ahmadi, Seyed Javad; Erfanian, Mahdi

    2018-01-09

    Aeolian sand dunes are continuously being discovered in inner dry lands and coastal areas, most of which have been formed over the Last Glacial Maximum. Presently, due to some natural and anthropogenic implications on earth, newly-born sand dunes are quickly emerging. Lake Urmia, the world's second largest permanent hypersaline lake, has started shrinking, vast lands comprising sand dunes over the western shore of the lake have appeared and one question has been playing on the minds of nearby dwellers: where are these sand dunes coming from, What there was not 15 years ago!! In the present study, the determination of the source of the Lake Urmia sand dunes in terms of the quantifying relative contribution of each upstream geomorphological/lithological unit has been performed using geochemical fingerprinting techniques. The findings demonstrate that the alluvial and the fluvial sediments of the western upstream catchment have been transported by water erosion and they accumulated in the lower reaches of the Kahriz River. Wind erosion, as a secondary agent, have carried the aeolian sand-sized sediments to the sand dune area. Hence, the Lake Urmia sand dunes have been originating from simultaneous and joint actions of alluvial, fluvial and aeolian processes.

  13. Chemical and isotopic fingerprinting of ancient Chinese porcelains

    Zhao, J.-X.; Li, B.-P.; Greig, A.; Collerson, K.D.; Feng, Y.-X.

    2005-01-01

    We have obtained unequivocal fingerprinting for many Chinese porcelains of utmost significance, based on high-precision multi-element and isotopic analysis by inductively-coupled mass spectrometry (ICP-MS) and thermal ionization mass spectrometry (TIMS) in our laboratory. As most ancient Chinese kilns used raw materials mined from local areas, differences in the geochemistry and mineralogy of these raw materials are expected to be preserved as distinctive geochemical and isotopic signatures in finished products and this may be useful for identifying their sources. Production techniques, such as purifying and mixing of different raw materials, may also vary from kiln to kiln, or may even change over time. All of that could also potentially leave a characteristic chemical and isotopic signature in a kiln's finished products. Using a tiny amount (often a few tens milligrams) of porcelain material, more than 40 element concentrations and Sr-Nd isotopic compositions can be rapidly and precisely determined on the ICP-MS and TIMS, respectively. The analytical results show that visibly similar Chinese porcelains made in different places and/or dynasties are strikingly distinctive. The data also allow modern fakes to be readily distinguished from antique porcelains. (author). 4 refs., 7 figs

  14. Electrostatic-spray ionization mass spectrometry sniffing for perfume fingerprinting.

    Tobolkina, Elena; Qiao, Liang; Xu, Guobin; Girault, Hubert H

    2013-11-15

    The perfume market is growing significantly, and it is easy to find imitative fragrances of probably all types of perfume. Such imitative fragrances are usually of lower quality than the authentic ones, creating a possible threat for perfume companies. Therefore, it is important to develop efficient chemical analysis techniques to screen rapidly perfume samples. Electrostatic-spray ionization (ESTASI) was used to analyze directly samples sprayed or deposited on different types of paper. A linear ion trap mass spectrometer was used to detect the ions produced by ESTASI with a modified extended transfer capillary for 'sniffing' ions from the paper. Several commercial perfumes and a model perfume were analyzed by ESTASI-sniffing. The results obtained by paper ESTASI-MS of commercial fragrances were compared with those obtained from ESI-MS. In addition, a commercial fragrance was first nebulized on the hand and then soaked up by blotting paper, which was afterwards placed on an insulating plate for ESTASI-MS analysis. Analysis of peptides and proteins was also performed to show that the paper ESTASI-MS could be used for samples with very different molecular masses. Paper ESTASI-MS yields a rapid fingerprinting characterization of perfume fragrances, avoiding time-consuming sample-preparation steps, and thereby performing a rapid screening in a few seconds. Copyright © 2013 John Wiley & Sons, Ltd.

  15. Interrogation of an autofluorescence-based method for protein fingerprinting.

    Siddaramaiah, Manjunath; Rao, Bola Sadashiva S; Joshi, Manjunath B; Datta, Anirbit; Sandya, S; Vishnumurthy, Vasudha; Chandra, Subhash; Nayak, Subramanya G; Satyamoorthy, Kapaettu; Mahato, Krishna K

    2018-03-14

    In the present study, we have designed a laser-induced fluorescence (LIF) based instrumentation and developed a sensitive methodology for the effective separation, visualization, identification and analysis of proteins on a single platform. In this method, intrinsic fluorescence spectra of proteins were detected after separation on 1 or 2 dimensional Sodium Dodecyl Sulfate-Tris(2-carboxyethyl)phosphine (SDS-TCEP) polyacrylamide gel electrophoresis (PAGE) and the data were analyzed. The MATLAB assisted software was designed for the development of PAGE fingerprint for the visualization of protein after 1- and 2-dimensional protein separation. These provided objective parameters of intrinsic fluorescence intensity, emission peak, molecular weight and isoelectric point using a single platform. Further, the current architecture could differentiate the overlapping proteins in the PAGE gels which otherwise were not identifiable by conventional staining, imaging and tagging methods. Categorization of the proteins based on the presence or absence of tyrosine or tryptophan residues and assigning the corresponding emission peaks (309-356 nm) with pseudo colors allowed the detection of proportion of proteins within the given spectrum. The present methodology doesn't use stains or tags, hence amenable to couple with mass spectroscopic measurements. This technique may have relevance in the field of proteomics that is used for innumerable applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Distortion in fingerprints: a statistical investigation using shape measurement tools.

    Sheets, H David; Torres, Anne; Langenburg, Glenn; Bush, Peter J; Bush, Mary A

    2014-07-01

    Friction ridge impression appearance can be affected due to the type of surface touched and pressure exerted during deposition. Understanding the magnitude of alterations, regions affected, and systematic/detectable changes occurring would provide useful information. Geometric morphometric techniques were used to statistically characterize these changes. One hundred and fourteen prints were obtained from a single volunteer and impressed with heavy, normal, and light pressure on computer paper, soft gloss paper, 10-print card stock, and retabs. Six hundred prints from 10 volunteers were rolled with heavy, normal, and light pressure on soft gloss paper and 10-print card stock. Results indicate that while different substrates/pressure levels produced small systematic changes in fingerprints, the changes were small in magnitude: roughly the width of one ridge. There were no detectable changes in the degree of random variability of prints associated with either pressure or substrate. In conclusion, the prints transferred reliably regardless of pressure or substrate. © 2014 American Academy of Forensic Sciences.

  17. Accommodating error analysis in comparison and clustering of molecular fingerprints.

    Salamon, H; Segal, M R; Ponce de Leon, A; Small, P M

    1998-01-01

    Molecular epidemiologic studies of infectious diseases rely on pathogen genotype comparisons, which usually yield patterns comprising sets of DNA fragments (DNA fingerprints). We use a highly developed genotyping system, IS6110-based restriction fragment length polymorphism analysis of Mycobacterium tuberculosis, to develop a computational method that automates comparison of large numbers of fingerprints. Because error in fragment length measurements is proportional to fragment length and is positively correlated for fragments within a lane, an align-and-count method that compensates for relative scaling of lanes reliably counts matching fragments between lanes. Results of a two-step method we developed to cluster identical fingerprints agree closely with 5 years of computer-assisted visual matching among 1,335 M. tuberculosis fingerprints. Fully documented and validated methods of automated comparison and clustering will greatly expand the scope of molecular epidemiology.

  18. An improved Hough transform-based fingerprint alignment approach

    Mlambo, CS

    2014-11-01

    Full Text Available An improved Hough Transform based fingerprint alignment approach is presented, which improves computing time and memory usage with accurate alignment parameter (rotation and translation) results. This is achieved by studying the strengths...

  19. Chemical characterization of fingerprints from adults and children

    Buchanan, M.V.; Asano, K. [Oak Ridge National Lab., TN (United States); Bohanon, A. [Knoxville Police Dept., TN (United States)

    1996-12-31

    Observation that children`s fingerprints disappear from surfaces more quickly than adults`, initiated a study to characterize the chemical components in fingerprints. Samples were obtained from about 50 individuals ranging in age from 3 to 64 by extracting chemicals from the fingertips using rubbing alcohol. Using combined gas chromatography/mass spectrometry, a wide range of compounds were identified. Samples from children contained higher levels of relatively volatile free fatty acids, while those from adults had higher levels of less volatile long chain esters of fatty acids. These esters are thought to originate from sebaceous glands located on the face and levels of these compounds increase substantially after puberty. Also, other compounds were observed that could be used to develop improved methods for fingerprint detection at a crime scene. Further, observation of specific compounds raises the possibility of being able to identify personal traits (gender, habits, diseases, etc. ) via analysis of components in fingerprints and/or skin.

  20. Development of quality control system for fingerprint comparison processes

    Shiquan Liu

    2017-01-01

    Full Text Available Fingerprint evidence played an important role in investigation, prosecution, and trial process due to the belief of its uniqueness and unchanged characteristics. However, in recent years, the science behind the process of fingerprint comparisons has been questioned. Main research questions have been focusing on the opaqueness within the comparison processes, subjective judgments, lack of universal standards, no error rate expression on final conclusions, and poor scientific fundamental research data. Facing the above-mentioned questions, this paper aims to suggest a quality control system (QCS for fingerprint comparison processes. This QCS is based on the use of software (PiAnoS and its technological features, being able to provide a data management model to increase the transparency and quality of fingerprint comparison processes.

  1. Performance characterization of structured light-based fingerprint scanner

    Hassebrook, Laurence G.; Wang, Minghao; Daley, Raymond C.

    2013-05-01

    Our group believes that the evolution of fingerprint capture technology is in transition to include 3-D non-contact fingerprint capture. More specifically we believe that systems based on structured light illumination provide the highest level of depth measurement accuracy. However, for these new technologies to be fully accepted by the biometric community, they must be compliant with federal standards of performance. At present these standards do not exist for this new biometric technology. We propose and define a set of test procedures to be used to verify compliance with the Federal Bureau of Investigation's image quality specification for Personal Identity Verification single fingerprint capture devices. The proposed test procedures include: geometric accuracy, lateral resolution based on intensity or depth, gray level uniformity and flattened fingerprint image quality. Several 2-D contact analogies, performance tradeoffs and optimization dilemmas are evaluated and proposed solutions are presented.

  2. SwyftTapp: An NFC based attendance system using fingerprint ...

    In this paper we discuss the use of NFC technology coupled with fingerprint ... The Department of Computer Engineering, KNUST was used as the scope .... The software design of the project, as shown in Figure 3, involved three main ...

  3. Huella genética vs. Huella dactilar/Geneticprint vs. Fingerprint

    Israel Estrada Camacho

    2015-01-01

    Full Text Available From the earliest times of history, man has struggled to establish an identification system that would differentiate it from their peers. To this end it has established specific techniques and methods. This study was intended precisely to know them the advantages and disadvantages presented two foolproof methods to identify the geneticprint and the traditional fingerprint. For which was conducted a bibliography search specialized in human identification methods, also had personal communication with experts in the field of Dactiloscopy expert and genetics forensic, with the intention of obtaining data, anecdotes and experiences that provide data for the development of this research, in order to know in depth each technique therefore in conclusion is considered that the time factor is still a great advantage of the use of the Dactiloscopy, since in a few minutes at a low cost and reliable results can be obtained. Unlike the previous main disadvantages of DNA analysis are high cost and time to perform your analysis. Still have to consider that the application of molecular techniques in the identification of persons allowed to solve those cases which could not solved using classical techniques of identification (fingerprint, dental chart, etc..

  4. WLAN Fingerprint Indoor Positioning Strategy Based on Implicit Crowdsourcing and Semi-Supervised Learning

    Chunjing Song

    2017-11-01

    Full Text Available Wireless local area network (WLAN fingerprint positioning is an indoor localization technique with high accuracy and low hardware requirements. However, collecting received signal strength (RSS samples for the fingerprint database is time-consuming and labor-intensive, hindering the use of this technique. The popular crowdsourcing sampling technique has been introduced to reduce the workload of sample collection, but has two challenges: one is the heterogeneity of devices, which can significantly affect the positioning accuracy; the other is the requirement of users’ intervention in traditional crowdsourcing, which reduces the practicality of the system. In response to these challenges, we have proposed a new WLAN indoor positioning strategy, which incorporates a new preprocessing method for RSS samples, the implicit crowdsourcing sampling technique, and a semi-supervised learning algorithm. First, implicit crowdsourcing does not require users’ intervention. The acquisition program silently collects unlabeled samples, the RSS samples, without information about the position. Secondly, to cope with the heterogeneity of devices, the preprocessing method maps all the RSS values of samples to a uniform range and discretizes them. Finally, by using a large number of unlabeled samples with some labeled samples, Co-Forest, the introduced semi-supervised learning algorithm, creates and repeatedly refines a random forest ensemble classifier that performs well for location estimation. The results of experiments conducted in a real indoor environment show that the proposed strategy reduces the demand for large quantities of labeled samples and achieves good positioning accuracy.

  5. Application of DNA fingerprints for cell-line individualization.

    Gilbert, D A; Reid, Y A; Gail, M H; Pee, D; White, C; Hay, R J; O'Brien, S J

    1990-01-01

    DNA fingerprints of 46 human cell lines were derived using minisatellite probes for hypervariable genetic loci. The incidence of 121 HaeIII DNA fragments among 33 cell lines derived from unrelated individuals was used to estimate allelic and genotypic frequencies for each fragment and for composite individual DNA fingerprints. We present a quantitative estimate of the extent of genetic difference between individuals, an estimate based on the percentage of restriction fragments at which they d...

  6. Accommodating error analysis in comparison and clustering of molecular fingerprints.

    Salamon, H.; Segal, M. R.; Ponce de Leon, A.; Small, P. M.

    1998-01-01

    Molecular epidemiologic studies of infectious diseases rely on pathogen genotype comparisons, which usually yield patterns comprising sets of DNA fragments (DNA fingerprints). We use a highly developed genotyping system, IS6110-based restriction fragment length polymorphism analysis of Mycobacterium tuberculosis, to develop a computational method that automates comparison of large numbers of fingerprints. Because error in fragment length measurements is proportional to fragment length and is ...

  7. Algorithm comparison for schedule optimization in MR fingerprinting.

    Cohen, Ouri; Rosen, Matthew S

    2017-09-01

    In MR Fingerprinting, the flip angles and repetition times are chosen according to a pseudorandom schedule. In previous work, we have shown that maximizing the discrimination between different tissue types by optimizing the acquisition schedule allows reductions in the number of measurements required. The ideal optimization algorithm for this application remains unknown, however. In this work we examine several different optimization algorithms to determine the one best suited for optimizing MR Fingerprinting acquisition schedules. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Human matching performance of genuine crime scene latent fingerprints.

    Thompson, Matthew B; Tangen, Jason M; McCarthy, Duncan J

    2014-02-01

    There has been very little research into the nature and development of fingerprint matching expertise. Here we present the results of an experiment testing the claimed matching expertise of fingerprint examiners. Expert (n = 37), intermediate trainee (n = 8), new trainee (n = 9), and novice (n = 37) participants performed a fingerprint discrimination task involving genuine crime scene latent fingerprints, their matches, and highly similar distractors, in a signal detection paradigm. Results show that qualified, court-practicing fingerprint experts were exceedingly accurate compared with novices. Experts showed a conservative response bias, tending to err on the side of caution by making more errors of the sort that could allow a guilty person to escape detection than errors of the sort that could falsely incriminate an innocent person. The superior performance of experts was not simply a function of their ability to match prints, per se, but a result of their ability to identify the highly similar, but nonmatching fingerprints as such. Comparing these results with previous experiments, experts were even more conservative in their decision making when dealing with these genuine crime scene prints than when dealing with simulated crime scene prints, and this conservatism made them relatively less accurate overall. Intermediate trainees-despite their lack of qualification and average 3.5 years experience-performed about as accurately as qualified experts who had an average 17.5 years experience. New trainees-despite their 5-week, full-time training course or their 6 months experience-were not any better than novices at discriminating matching and similar nonmatching prints, they were just more conservative. Further research is required to determine the precise nature of fingerprint matching expertise and the factors that influence performance. The findings of this representative, lab-based experiment may have implications for the way fingerprint examiners testify in

  9. Holistic processing of fingerprints by expert forensic examiners.

    Vogelsang, Macgregor D; Palmeri, Thomas J; Busey, Thomas A

    2017-01-01

    Holistic processing is often characterized as a process by which objects are perceived as a whole rather than a compilation of individual features. This mechanism may play an important role in the development of perceptual expertise because it allows for rapid integration across image regions. The present work explores whether holistic processing is present in latent fingerprint examiners, who compare fingerprints collected from crime scenes against a set of standards taken from a suspect. We adapted a composite task widely used in the face recognition and perceptual expertise literatures, in which participants were asked to match only a particular half of a fingerprint with a previous image while ignoring the other half. We tested both experts and novices, using both upright and inverted fingerprints. For upright fingerprints, we found weak evidence for holistic processing, but with no differences between experts and novices with respect to holistic processing. For inverted fingerprints, we found stronger evidence of holistic processing, with weak evidence for differences between experts and novices. These relatively weak holistic processing effects contrast with robust evidence for holistic processing with faces and with objects in other domains of perceptual expertise. The data constrain models of holistic processing by demonstrating that latent fingerprint experts and novices may not substantively differ in terms of the amount of holistic processing and that inverted stimuli actually produced more evidence for holistic processing than upright stimuli. Important differences between the present fingerprint stimuli and those in the literature include the lack of verbal labels for experts and the absence of strong vertical asymmetries, both of which might contribute to stronger holistic processing signatures in other stimulus domains.

  10. Mid-infrared supercontinuum generation in the fingerprint region

    Møller, Uffe Visbech; Petersen, Christian Rosenberg; Kubat, Irnis

    The mid-infrared spectral region is of great technical and scientific interest because most molecules display fundamental vibrational absorptions in this region, leaving distinctive spectral fingerprints. Here, we demonstrate experimentally that launching intense ultra-short pulses with a central...... the potential of fibres to emit across the mid-infrared molecular fingerprint region, which is of key importance for applications such as early cancer diagnostics, gas sensing and food quality control....

  11. The passage from Rio.

    Strong, M F

    1992-01-01

    The Secretary-General of the UN Conference on Environment and Development notes that after the Earth Summit in Rio de Janeiro discussions about the environment and development will differ from those prior to the Summit. These discussions must now incorporate problems of developing countries, poverty, inequalities, flow of resources to developing countries, and terms of trade. The Rio Declaration on Environment and Development consists of important tenets, but it must evolve into an Earth Charter to be endorsed on the 50th anniversary of the UN in 1965. The Summit's Plan of Action, Agenda 21, must also continue to evolve and, despite its shortcomings, is the most extensive and, if implemented, most effective international action ever approved by the international community. Financing the Agenda 21 initiatives remains to be decided. New possible sources of funding must be based n the polluter pays principle and may include new taxes, user charges, emission permits, and citizen funding. Even though the most serious problem in the 1990s is stabilization of atmospheric gases, the Rio agreement does not include targets or timetables. Governments must take united action immediately to reduce carbon dioxide emissions by at least 60%. 1 nation has not yet approved the convention on biological diversity. Governments also need to move forward on conventions on decertification and deforestation. They need to incorporate the global objectives of Agenda 21 into their own national policies and practices. This must also be done at the global, regional, organizational, local, and individual levels. The global community must also begin technology capacity building. The participatory process should also include nongovernmental organizations. Population growth must also slow dramatically to achieve sustainable development. The various participatory levels must consider elimination of poverty.

  12. Recognition of explosives fingerprints on objects for courier services using machine learning methods and laser-induced breakdown spectroscopy.

    Moros, J; Serrano, J; Gallego, F J; Macías, J; Laserna, J J

    2013-06-15

    During recent years laser-induced breakdown spectroscopy (LIBS) has been considered one of the techniques with larger ability for trace detection of explosives. However, despite of the high sensitivity exhibited for this application, LIBS suffers from a limited selectivity due to difficulties in assigning the molecular origin of the spectral emissions observed. This circumstance makes the recognition of fingerprints a latent challenging problem. In the present manuscript the sorting of six explosives (chloratite, ammonal, DNT, TNT, RDX and PETN) against a broad list of potential harmless interferents (butter, fuel oil, hand cream, olive oil, …), all of them in the form of fingerprints deposited on the surfaces of objects for courier services, has been carried out. When LIBS information is processed through a multi-stage architecture algorithm built from a suitable combination of 3 learning classifiers, an unknown fingerprint may be labeled into a particular class. Neural network classifiers trained by the Levenberg-Marquardt rule were decided within 3D scatter plots projected onto the subspace of the most useful features extracted from the LIBS spectra. Experimental results demonstrate that the presented algorithm sorts fingerprints according to their hazardous character, although its spectral information is virtually identical in appearance, with rates of false negatives and false positives not beyond of 10%. These reported achievements mean a step forward in the technology readiness level of LIBS for this complex application related to defense, homeland security and force protection. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Development of Well-Preserved, Substrate-Versatile Latent Fingerprints by Aggregation-Induced Enhanced Emission-Active Conjugated Polyelectrolyte.

    Malik, Akhtar Hussain; Kalita, Anamika; Iyer, Parameswar Krishnan

    2017-10-25

    The development of highly efficient latent fingerprint (LFP) technology remains extremely vital for forensic and criminal investigations. In this contribution, a straightforward, rapid, and cost-effective method has been established for the quick development of well-preserved latent fingerprint on multiple substrates, including plastic, glass, aluminum foil, metallic surfaces, and so forth, without any additional treatment, based on aggregation-induced enhanced emission-active conjugated polyelectrolyte (CPE) 3,3'-((2-(4-(1,2-diphenyl-2-(p-tolyl)vinyl)phenyl)-7-(7-methylbenzo[c][1,2,5]thiadiazol-4-yl)-9H-fluorene-9,9-diyl)bis(hexane-6,1-diyl))bis(1-methyl-1H-imidazol-3-ium) bromide, revealing clearly the third-level details (ridges, bifurcations, and pores) with high selectivity, high contrast, and no background interference even by blood stains, confirming the ability of the proposed technique for LFP detection with high resolution. The LFP development process was accomplished simply by immersing fingerprint-loaded substrate into the CPE solution for ∼1 min, followed by shaking off the residual polymer solution and then air drying. The CPE was readily transferred to the LFPs because of the strong electrostatic and hydrophobic interaction between the CPE molecules and the fingerprint components revealing distinct fluorescent images on various smooth nonporous surfaces.

  14. Exploration and classification of chromatographic fingerprints as additional tool for identification and quality control of several Artemisia species.

    Alaerts, Goedele; Pieters, Sigrid; Logie, Hans; Van Erps, Jürgen; Merino-Arévalo, Maria; Dejaegher, Bieke; Smeyers-Verbeke, Johanna; Vander Heyden, Yvan

    2014-07-01

    -analysis technique. Samples of different quality could be indicated on the score plots. No multi-component analysis was required to reach the goal. Furthermore, differences related to the origin of some of the not-certified samples were shown. The importance of the specific herbal part used for its identification was also presented. In addition, no differences were observed among fingerprints of lyophilised or conditioned-air dried samples. Finally, a classification technique, Soft Independent Modelling by Class Analogy (SIMCA), was successfully evaluated as identification technique for unknown samples. Six additional Artemisia species (29 herbal samples) were identified as not belonging to any of the four modelled classes. The developed chromatographic fingerprints and the evaluation of the entire profiles provide an added value to the distinction, identification and quality control of the simultaneously investigated Artemisia species. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Establishment and application of milk fingerprint by gel filtration chromatography.

    Gao, P; Li, J; Li, Z; Hao, J; Zan, L

    2016-12-01

    Raw milk adulteration frequently occurs in undeveloped countries. It not only reduces the nutritional value of milk, but it is also harmful to consumers. In this paper, we focused on investigating an efficient method for the quality control of raw milk protein. A gel filtration chromatography (GFC) fingerprint method combined with chemometrics was developed for fingerprint analysis of raw milk. To optimize the GFC conditions, milk fat was removed by centrifugation, and GFC analysis was performed on a Superdex 75 10/300GL column (Just Scientific, Shanghai, China) with 0.2 M NaH 2 PO 4 -Na 2 HPO 4 buffer (pH 7.0) as the mobile phase. The flow rate was 0.5mL/min, and the detection wavelength was set at 280 nm. Ten batches of 120 raw milk samples were analyzed to establish the GFC fingerprint under optimal conditions. Six major peaks common to the chromatogram of each raw milk sample were selected for fingerprint analysis, and the characteristic peaks were used to establish a standard chromatographic fingerprint. Principal component analysis was then applied to classify GFC information of adulterated milk and raw milk, allowing adulterated samples to be effectively screened out from the raw milk in principal component analysis scores plot. The fingerprint method demonstrates promising features in detecting milk protein adulteration. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  16. Multifragment alleles in DNA fingerprints of the parrot, Amazona ventralis

    Brock, M.K.; White, B.N.

    1991-01-01

    Human DNA probes that identify variable numbers of tandem repeat loci are being used to generate DNA fingerprints in many animal and plant species. In most species the majority of the sc rable autoradiographic bands of the DNA fingerprint represent alleles from numerous unlinked loci. This study was initiated to use DNA fingerprints to determine the amount of band-sharing among captive Hispaniolan parrots (Amazona ventralis) with known genetic relationships. This would form the data base to examine DNA fingerprints of the closely related and endangered Puerto Rican parrot (A. vittata) and to estimate the degree of inbreeding in the relic population. We found by segregation analysis of the bands scored in the DNA fingerprints of the Hispaniolan parrots that there may be as few as two to five loci identified by the human 33.15 probe. Furthermore, at one locus we identified seven alleles, one of which is represented by as many as 19 cosegregating bands. It is unknown how common multiband alleles might be in natural populations, and their existence will cause problems in the assessment of relatedness by band-sharing analysis. We believe, therefore, that a pedigree analysis should be included in all DNA fingerprinting studies, where possible, in order to estimate the number of loci identified by a minisatellite DNA probe and to examine the nature of their alleles.

  17. DNA fingerprinting of the NCI-60 cell line panel.

    Lorenzi, Philip L; Reinhold, William C; Varma, Sudhir; Hutchinson, Amy A; Pommier, Yves; Chanock, Stephen J; Weinstein, John N

    2009-04-01

    The National Cancer Institute's NCI-60 cell line panel, the most extensively characterized set of cells in existence and a public resource, is frequently used as a screening tool for drug discovery. Because many laboratories around the world rely on data from the NCI-60 cells, confirmation of their genetic identities represents an essential step in validating results from them. Given the consequences of cell line contamination or misidentification, quality control measures should routinely include DNA fingerprinting. We have, therefore, used standard DNA microsatellite short tandem repeats to profile the NCI-60, and the resulting DNA fingerprints are provided here as a reference. Consistent with previous reports, the fingerprints suggest that several NCI-60 lines have common origins: the melanoma lines MDA-MB-435, MDA-N, and M14; the central nervous system lines U251 and SNB-19; the ovarian lines OVCAR-8 and OVCAR-8/ADR (also called NCI/ADR); and the prostate lines DU-145, DU-145 (ATCC), and RC0.1. Those lines also show that the ability to connect two fingerprints to the same origin is not affected by stable transfection or by the development of multidrug resistance. As expected, DNA fingerprints were not able to distinguish different tissues-of-origin. The fingerprints serve principally as a barcodes.

  18. Fingerprint: A Unique and Reliable Method for Identification

    Palash Kumar Bose

    2017-01-01

    Full Text Available Fingerprints have been the gold standard for personal identification within the forensic community for more than one hundred years. It is still universal in spite of discovery of DNA fingerprint. The science of fingerprint identification has evolved over time from the early use of finger prints to mark business transactions in ancient Babylonia to their use today as core technology in biometric security devices and as scientific evidence in courts of law throughout the world. The science of fingerprints, dactylography or dermatoglyphics, had long been widely accepted, and well acclaimed and reputed as panacea for individualization, particularly in forensic investigations. Human fingerprints are detailed, unique, difficult to alter, and durable over the life of an individual, making them suitable as lifelong markers of human identity. Fingerprints can be readily used by police or other authorities to identify individuals who wish to conceal their identity, or to identify people who are incapacitated or deceased, as in the aftermath of a natural disaster

  19. Laser mass spectrometry for DNA fingerprinting for forensic applications

    Chen, C.H.; Tang, K.; Taranenko, N.I.; Allman, S.L.; Chang, L.Y.

    1994-12-31

    The application of DNA fingerprinting has become very broad in forensic analysis, patient identification, diagnostic medicine, and wildlife poaching, since every individual`s DNA structure is identical within all tissues of their body. DNA fingerprinting was initiated by the use of restriction fragment length polymorphisms (RFLP). In 1987, Nakamura et al. found that a variable number of tandem repeats (VNTR) often occurred in the alleles. The probability of different individuals having the same number of tandem repeats in several different alleles is very low. Thus, the identification of VNTR from genomic DNA became a very reliable method for identification of individuals. DNA fingerprinting is a reliable tool for forensic analysis. In DNA fingerprinting, knowledge of the sequence of tandem repeats and restriction endonuclease sites can provide the basis for identification. The major steps for conventional DNA fingerprinting include (1) specimen processing (2) amplification of selected DNA segments by PCR, and (3) gel electrophoresis to do the final DNA analysis. In this work we propose to use laser desorption mass spectrometry for fast DNA fingerprinting. The process and advantages are discussed.

  20. Rio responses in the Netherlands

    Bruggink, J.J.C.

    1994-01-01

    Three of the five agreements reached in Rio - the Rio Declaration, Agenda 21 and the Framework Convention on Climate Change - are briefly summarised from and energy perspective. The state of the art in the two national policy areas that are crucial for sustainable development, environmental policy and development cooperation, are then described. Some conclusions are drawn regarding the major bottlenecks and challenges for Dutch policies in the wake of Rio. 2 figs

  1. Chemical fingerprinting and source tracing of obsidian: the central Mediterranean trade in black gold.

    Tykot, Robert H

    2002-08-01

    Chemical fingerprinting using major or trace element composition is used to characterize the Mediterranean island sources of obsidian and can even differentiate as many as nine flows in the Monte Arci region of Sardinia. Analysis of significant numbers of obsidian artifacts from Neolithic sites in the central Mediterranean reveals specific patterns of source exploitation and suggests particular trade mechanisms and routes. The use of techniques such as X-ray fluorescence, the electron microprobe, neutron activation analysis, and laser ablation ICP mass spectrometry are emphasized in order to produce quantitative results while minimizing damage to valuable artifacts.

  2. Three-dimensional imaging of artificial fingerprint by optical coherence tomography

    Larin, Kirill V.; Cheng, Yezeng

    2008-03-01

    Fingerprint recognition is one of the popular used methods of biometrics. However, due to the surface topography limitation, fingerprint recognition scanners are easily been spoofed, e.g. using artificial fingerprint dummies. Thus, biometric fingerprint identification devices need to be more accurate and secure to deal with different fraudulent methods including dummy fingerprints. Previously, we demonstrated that Optical Coherence Tomography (OCT) images revealed the presence of the artificial fingerprints (made from different household materials, such as cement and liquid silicone rubber) at all times, while the artificial fingerprints easily spoofed the commercial fingerprint reader. Also we demonstrated that an analysis of the autocorrelation of the OCT images could be used in automatic recognition systems. Here, we exploited the three-dimensional (3D) imaging of the artificial fingerprint by OCT to generate vivid 3D image for both the artificial fingerprint layer and the real fingerprint layer beneath. With the reconstructed 3D image, it could not only point out whether there exists an artificial material, which is intended to spoof the scanner, above the real finger, but also could provide the hacker's fingerprint. The results of these studies suggested that Optical Coherence Tomography could be a powerful real-time noninvasive method for accurate identification of artificial fingerprints real fingerprints as well.

  3. Website Fingerprinting Defenses at the Application Layer

    Cherubin Giovanni

    2017-04-01

    Full Text Available Website Fingerprinting (WF allows a passive network adversary to learn the websites that a client visits by analyzing traffic patterns that are unique to each website. It has been recently shown that these attacks are particularly effective against .onion sites, anonymous web servers hosted within the Tor network. Given the sensitive nature of the content of these services, the implications of WF on the Tor network are alarming. Prior work has only considered defenses at the client-side arguing that web servers lack of incentives to adopt countermeasures. Furthermore, most of these defenses have been designed to operate on the stream of network packets, making practical deployment difficult. In this paper, we propose two application-level defenses including the first server-side defense against WF, as .onion services have incentives to support it. The other defense is a lightweight client-side defense implemented as a browser add-on, improving ease of deployment over previous approaches. In our evaluations, the server-side defense is able to reduce WF accuracy on Tor .onion sites from 69.6% to 10% and the client-side defense reduces accuracy from 64% to 31.5%.

  4. DNA fingerprinting in zoology: past, present, future.

    Chambers, Geoffrey K; Curtis, Caitlin; Millar, Craig D; Huynen, Leon; Lambert, David M

    2014-02-03

    In 1962, Thomas Kuhn famously argued that the progress of scientific knowledge results from periodic 'paradigm shifts' during a period of crisis in which new ideas dramatically change the status quo. Although this is generally true, Alec Jeffreys' identification of hypervariable repeat motifs in the human beta-globin gene, and the subsequent development of a technology known now as 'DNA fingerprinting', also resulted in a dramatic shift in the life sciences, particularly in ecology, evolutionary biology, and forensics. The variation Jeffreys recognized has been used to identify individuals from tissue samples of not just humans, but also of many animal species. In addition, the technology has been used to determine the sex of individuals, as well as paternity/maternity and close kinship. We review a broad range of such studies involving a wide diversity of animal species. For individual researchers, Jeffreys' invention resulted in many ecologists and evolutionary biologists being given the opportunity to develop skills in molecular biology to augment their whole organism focus. Few developments in science, even among the subsequent genome discoveries of the 21st century, have the same wide-reaching significance. Even the later development of PCR-based genotyping of individuals using microsatellite repeats sequences, and their use in determining multiple paternity, is conceptually rooted in Alec Jeffreys' pioneering work.

  5. Multiscale Reconstruction for Magnetic Resonance Fingerprinting

    Pierre, Eric Y.; Ma, Dan; Chen, Yong; Badve, Chaitra; Griswold, Mark A.

    2015-01-01

    Purpose To reduce acquisition time needed to obtain reliable parametric maps with Magnetic Resonance Fingerprinting. Methods An iterative-denoising algorithm is initialized by reconstructing the MRF image series at low image resolution. For subsequent iterations, the method enforces pixel-wise fidelity to the best-matching dictionary template then enforces fidelity to the acquired data at slightly higher spatial resolution. After convergence, parametric maps with desirable spatial resolution are obtained through template matching of the final image series. The proposed method was evaluated on phantom and in-vivo data using the highly-undersampled, variable-density spiral trajectory and compared with the original MRF method. The benefits of additional sparsity constraints were also evaluated. When available, gold standard parameter maps were used to quantify the performance of each method. Results The proposed approach allowed convergence to accurate parametric maps with as few as 300 time points of acquisition, as compared to 1000 in the original MRF work. Simultaneous quantification of T1, T2, proton density (PD) and B0 field variations in the brain was achieved in vivo for a 256×256 matrix for a total acquisition time of 10.2s, representing a 3-fold reduction in acquisition time. Conclusions The proposed iterative multiscale reconstruction reliably increases MRF acquisition speed and accuracy. PMID:26132462

  6. Transmission fingerprints in quasiperiodic magnonic multilayers

    Coelho, I.P. [Departamento de Ensino Superior, Instituto Federal de Educacao, Ciencia e Tecnologia do Maranhao, Imperatriz-MA 65919-050 (Brazil); Departamento de Fisica, Universidade Federal do Rio Grande do Norte, Natal-RN 59072-970 (Brazil); Vasconcelos, M.S. [Escola de Ciencias e Tecnologia, Universidade Federal do Rio Grande do Norte, Natal-RN 59072-970 (Brazil); Bezerra, C.G., E-mail: cbezerra@dfte.ufrn.br [Departamento de Fisica, Universidade Federal do Rio Grande do Norte, Natal-RN 59072-970 (Brazil)

    2011-12-15

    In this paper we investigated the influence of mirror symmetry on the transmission spectra of quasiperiodic magnonic multilayers arranged according to Fibonacci, Thue-Morse and double period quasiperiodic sequences. We consider that the multilayers composed of two simple cubic Heisenberg ferromagnets with bulk exchange constants J{sub A} and J{sub B} and spin quantum numbers S{sub A} and S{sub B}, respectively. The multilayer structure is surrounded by two semi-infinite slabs of a third Heisenberg ferromagnetic material with exchange constant J{sub C} and spin quantum number S{sub C}. For simplicity, the lattice constant has the same value a in each material, corresponding to epitaxial growth at the interfaces. The transfer matrix treatment was used for the exchange-dominated regime, taking into account the random phase approximation (RPA). Our numerical results illustrate the effects of mirror symmetry on (i) transmission spectra and (ii) transmission fingerprints. - Highlights: > We model quasiperiodic magnetic multilayers presenting mirror symmetry. > We investigated the allowed and forbidden bands of magnonic transmission. > Transmission return maps show the influence of mirror symmetry. > Mirror symmetry has no effect on the Fibonacci case. > Mirror symmetry does have effect on the Thue-Morse and double period cases.

  7. Transmission fingerprints in quasiperiodic magnonic multilayers

    Coelho, I.P.; Vasconcelos, M.S.; Bezerra, C.G.

    2011-01-01

    In this paper we investigated the influence of mirror symmetry on the transmission spectra of quasiperiodic magnonic multilayers arranged according to Fibonacci, Thue-Morse and double period quasiperiodic sequences. We consider that the multilayers composed of two simple cubic Heisenberg ferromagnets with bulk exchange constants J A and J B and spin quantum numbers S A and S B , respectively. The multilayer structure is surrounded by two semi-infinite slabs of a third Heisenberg ferromagnetic material with exchange constant J C and spin quantum number S C . For simplicity, the lattice constant has the same value a in each material, corresponding to epitaxial growth at the interfaces. The transfer matrix treatment was used for the exchange-dominated regime, taking into account the random phase approximation (RPA). Our numerical results illustrate the effects of mirror symmetry on (i) transmission spectra and (ii) transmission fingerprints. - Highlights: → We model quasiperiodic magnetic multilayers presenting mirror symmetry. → We investigated the allowed and forbidden bands of magnonic transmission. → Transmission return maps show the influence of mirror symmetry. → Mirror symmetry has no effect on the Fibonacci case. → Mirror symmetry does have effect on the Thue-Morse and double period cases.

  8. Application of DNA fingerprints for cell-line individualization.

    Gilbert, D A; Reid, Y A; Gail, M H; Pee, D; White, C; Hay, R J; O'Brien, S J

    1990-09-01

    DNA fingerprints of 46 human cell lines were derived using minisatellite probes for hypervariable genetic loci. The incidence of 121 HaeIII DNA fragments among 33 cell lines derived from unrelated individuals was used to estimate allelic and genotypic frequencies for each fragment and for composite individual DNA fingerprints. We present a quantitative estimate of the extent of genetic difference between individuals, an estimate based on the percentage of restriction fragments at which they differ. The average percent difference (APD) among pairwise combinations from the population of 33 unrelated cell lines was 76.9%, compared with the APD in band sharing among cell lines derived from the same individual (less than or equal to 1.2%). Included in this survey were nine additional cell lines previously implicated as HeLa cell derivatives, and these lines were clearly confirmed as such by DNA fingerprints (APD less than or equal to 0.6%). On the basis of fragment frequencies in the tested cell line population, a simple genetic model was developed to estimate the frequencies of each DNA fingerprint in the population. The median incidence was 2.9 X 10(-17), and the range was 2.4 X 10(-21) to 6.6 X 10(-15). This value approximates the probability that a second cell line selected at random from unrelated individuals will match a given DNA fingerprint. Related calculations address the chance that any two DNA fingerprints would be identical among a large group of cell lines. This estimate is still very slight; for example, the chance of two or more common DNA fingerprints among 1 million distinct individuals is less than .001. The procedure provides a straightforward, easily interpreted, and statistically robust method for identification and individualization of human cells.

  9. Testing of complementarity of PDA and MS detectors using chromatographic fingerprinting of genuine and counterfeit samples containing sildenafil citrate.

    Custers, Deborah; Krakowska, Barbara; De Beer, Jacques O; Courselle, Patricia; Daszykowski, Michal; Apers, Sandra; Deconinck, Eric

    2016-02-01

    Counterfeit medicines are a global threat to public health. High amounts enter the European market, which is why characterization of these products is a very important issue. In this study, a high-performance liquid chromatography-photodiode array (HPLC-PDA) and high-performance liquid chromatography-mass spectrometry (HPLC-MS) method were developed for the analysis of genuine Viagra®, generic products of Viagra®, and counterfeit samples in order to obtain different types of fingerprints. These data were included in the chemometric data analysis, aiming to test whether PDA and MS are complementary detection techniques. The MS data comprise both MS1 and MS2 fingerprints; the PDA data consist of fingerprints measured at three different wavelengths, i.e., 254, 270, and 290 nm, and all possible combinations of these wavelengths. First, it was verified if both groups of fingerprints can discriminate between genuine, generic, and counterfeit medicines separately; next, it was studied if the obtained results could be ameliorated by combining both fingerprint types. This data analysis showed that MS1 does not provide suitable classification models since several genuines and generics are classified as counterfeits and vice versa. However, when analyzing the MS1_MS2 data in combination with partial least squares-discriminant analysis (PLS-DA), a perfect discrimination was obtained. When only using data measured at 254 nm, good classification models can be obtained by k nearest neighbors (kNN) and soft independent modelling of class analogy (SIMCA), which might be interesting for the characterization of counterfeit drugs in developing countries. However, in general, the combination of PDA and MS data (254 nm_MS1) is preferred due to less classification errors between the genuines/generics and counterfeits compared to PDA and MS data separately.

  10. Anatomia microcirúrgica do hipocampo na Amígdalo-hipocampectomia seletiva sob a perspectiva da técnica de Niemeyer e método pré-operatório para maximizar a corticotomia Hippocampal microsurgical anatomy regarding the selective amygdalohippocampectomy in the Niemeyer’s technique perspective and preoperative method to maximize the corticotomy

    Gustavo Rassier Isolan

    2007-12-01

    Full Text Available O conhecimento da anatomia microcirúrgica do hipocampo tem importância fundamental na cirurgia da epilepsia do lobo temporal. Uma das técnicas mais utilizadas na cirurgia da epilepsia é a técnica de Niemeyer. OBJETIVO: Descrever em detalhes a anatomia do hipocampo e mostrar uma técnica na qual pontos de referências anatômicos pré-operatórios visualizados na RNM são usados para guiar a corticotomia. MÉTODO: Foram utilizados 20 hemisférios cerebrais e 8 cadáveres para dissecções anatômicas microcirúrgicas do lobo temporal e hipocampo para identificação e descrição das principais estruturas do hipocampo. Foram estudados prospectivamente 32 pacientes com epilepsia do lobo temporal refratários ao tratamento clínico submetidos a amígdalo-hipocampectomia seletiva pela técnica de Niemeyer três parâmetros anatômicos foram mensurados na RNM pré operatória e transferidos para o ato cirúrgico. RESULTADOS: O hipocampo foi dividido em cabeça, corpo e cauda e sua anatomia microcirúrgica descrita em detalhes. As medidas adquiridas são apresentadas e discutidas. CONCLUSÃO: A complexa anatomia do hipocampo pode ser entendida de uma forma tridimensional durante dissecções microcirúrgicas. As medidas pré-operatórias mostraram-se guias anatômicos úteis para corticotomia na técnica de Niemeyer.The deep knowledge of hippocampal microsurgical anatomy is paramount in epilepsy surgery. One of the most used techniques is those proposed by Niemeyer. PURPOSE: To describe the hippocampal anatomy in details and to present a technique which preoperative anatomical points in MRI are identified to guide the corticotomy. METHOD: Microsurgical dissections were performed in twenty brain hemispheres and eight cadaveric heads to identify temporal lobe and hippocampus structures. Thirty two patients with drug-resistent temporal lobe epilepsy underwent a selective amygdalohippocampectomy with Niemeyer’s technique being measured three

  11. Reconstrução do ligamento cruzado anterior com a técnica de duplo feixe - avaliação no laboratório de biomecânica Anterior cruciate ligament reconstruction using the double bundle technique - evaluation in the biomechanics laboratory

    Caio Oliveira D'Elia

    2011-04-01

    Full Text Available OBJETIVO: O objetivo deste estudo é descrever a metodologia da análise da rotação do joelho utilizando instrumentos do laboratório de biomecânica e apresentar os resultados preliminares de um estudo comparativo com pacientes submetidos à reconstrução do ligamento cruzado anterior com a técnica de duplo feixe. MÉTODOS: Descreveu-se o protocolo atualmente utilizado em nosso laboratório e realizou-se a análise cinemática tridimensional e medida da amplitude de rotação do joelho de oito pacientes normais (grupo controle e 12 pacientes operados com a técnica de duplo feixe em três tarefas no laboratório de biomecânica. RESULTADOS: Não indicam diferenças significativas entre os lados operados e não operados em relação às amplitudes médias da marcha, da marcha com mudança de direção ou da marcha com mudança de direção ao descer a escada (p > 0,13. CONCLUSÕES: Os resultados preliminares não demonstraram diferença da técnica de reconstrução de LCA em duplo feixe em relação ao lado contralateral e ao grupo controle.OBJECTIVE: The objective of this study was to describe the methodology of knee rotation analysis using biomechanics laboratory instruments and to present the preliminary results from a comparative study on patients who underwent anterior cruciate ligament (ACL reconstruction using the double-bundle technique. METHODS: The protocol currently used in our laboratory was described. Three-dimensional kinematic analysis was performed and knee rotation amplitude was measured on eight normal patients (control group and 12 patients who were operated using the double-bundle technique, by means of three tasks in the biomechanics laboratory. RESULTS: No significant differences between operated and non-operated sides were shown in relation to the mean amplitudes of gait, gait with change in direction or gait with change in direction when going down stairs (p > 0.13. CONCLUSION: The preliminary results did not show

  12. Aplicação da ferramenta SWOT para avaliação das técnicas de dano ao choque térmico em materiais refratários SWOT as a tool to evaluate the thermal shock damage technique of refractory materials

    L. R. G. Gonçalves

    2010-12-01

    Full Text Available A literatura indica diversos tipos de ensaios e diferentes métodos de avaliação de dano por choque térmico. Adicionalmente sabe-se que, em determinadas aplicações, esse tipo de dano é um dos principais responsáveis pela degradação do revestimento refratário. Neste contexto e buscando a melhor forma de reproduzir as condições em serviço do revestimento refratário, o presente trabalho foi realizado visando analisar qual tipo de ensaio de choque térmico e método de avaliação do dano são os mais adequados para avaliar o desempenho destes materiais. Essa análise foi baseada em uma revisão bibliográfica e resultados obtidos em laboratório, em que se comparou e avaliou as vantagens e desvantagens dos métodos mais relevantes encontrados na literatura. Por fim, com o auxilio da ferramenta SWOT foi possível verificar se o método adotado pelos autores desse trabalho é adequado para auxiliar na seleção do refratário para aplicação em calcinadores de leito fluidizado.The literature shows different tests and techniques for evaluating the thermal shock damage. Additionally, it is known that, for certain applications, this type of wear mechanism is one of the main causes of fluid flash calciner refractory degradation. Within this context and in order to find the best way to reproduce the refractory lining service conditions, this work was carried out to point out which thermal shock test and damage assessment method are more suitable to evaluate these materials. This analysis was based on a literature review and laboratory experiments, comparing and evaluating the advantages and disadvantages of the most important methods available. Finally, with the support of the SWOT tool it was possible to evaluate whether the method adopted by the authors of this work is appropriated for helping the selection of the refractories for calciners application.

  13. Comparative Study of the Accuracy of Different Techniques for the Laboratory Diagnosis of Schistosomiasis Mansoni in Areas of Low Endemicity in Barra Mansa City, Rio de Janeiro State, Brazil

    Maria Cristina Carvalho Espírito-Santo

    2015-01-01

    Full Text Available Schistosomiasis constitutes a major public health problem, with an estimated 200 million people infected worldwide. Many areas of Brazil show low endemicity of schistosomiasis, and the current standard parasitological techniques are not sufficiently sensitive to detect the low-level helminth infections common in areas of low endemicity (ALEs. This study compared the Kato-Katz (KK; Hoffman, Pons, and Janer (HH; enzyme-linked immunosorbent assay- (ELISA- IgG and ELISA-IgM; indirect immunofluorescence technique (IFT-IgM; and qPCR techniques for schistosomiasis detection in serum and fecal samples, using the circumoval precipitin test (COPT as reference. An epidemiological survey was conducted in a randomized sample of residents from five neighborhoods of Barra Mansa, RJ, with 610 fecal and 612 serum samples. ELISA-IgM (21.4% showed the highest positivity and HH and KK techniques were the least sensitive (0.8%. All techniques except qPCR-serum showed high accuracy (82–95.5%, differed significantly from COPT in positivity P<0.05, and showed poor agreement with COPT. Medium agreement was seen with ELISA-IgG (Kappa = 0.377 and IFA (Kappa = 0.347. Parasitological techniques showed much lower positivity rates than those by other techniques. We suggest the possibility of using a combination of laboratory tools for the diagnosis of schistosomiasis in ALEs.

  14. The mechanical fingerprint of murine excisional wounds.

    Pensalfini, Marco; Haertel, Eric; Hopf, Raoul; Wietecha, Mateusz; Werner, Sabine; Mazza, Edoardo

    2018-01-01

    A multiscale mechanics approach to the characterization of murine excisional wounds subjected to uniaxial tensile loading is presented. Local strain analysis at a physiological level of tension uncovers the presence of two distinct regions within the wound: i) a very compliant peripheral cushion and ii) a core area undergoing modest deformation. Microstructural visualizations of stretched wound specimens show negligible engagement of the collagen located in the center of a 7-day old wound; fibers remain coiled despite the applied tension, confirming the existence of a mechanically isolated wound core. The compliant cushion located at the wound periphery appears to protect the newly-formed tissue from excessive deformation during the phase of new tissue formation. The early remodeling phase (day 14) is characterized by a restored mechanical connection between far field and wound center. The latter remains less deformable, a characteristic possibly required for cell activities during tissue remodeling. The distribution of fibrillary collagens at these two time points corresponds well to the identified heterogeneity of mechanical properties of the wound region. This novel approach provides new insight into the mechanical properties of wounded skin and will be applicable to the analysis of compound-treated wounds or wounds in genetically modified tissue. Biophysical characterization of healing wounds is crucial to assess the recovery of the skin barrier function and the associated mechanobiological processes. For the first time, we performed highly resolved local deformation analysis to identify mechanical characteristics of the wound and its periphery. Our results reveal the presence of a compliant cushion surrounding a stiffer wound core; we refer to this heterogeneous mechanical behavior as "mechanical fingerprint" of the wound. The mechanical response is shown to progress towards that of the intact skin as healing takes place. Histology and multiphoton microscopy

  15. Geomorphic process fingerprints in submarine canyons

    Brothers, Daniel S.; ten Brink, Uri S.; Andrews, Brian D.; Chaytor, Jason D.; Twichell, David C.

    2013-01-01

    Submarine canyons are common features of continental margins worldwide. They are conduits that funnel vast quantities of sediment from the continents to the deep sea. Though it is known that submarine canyons form primarily from erosion induced by submarine sediment flows, we currently lack quantitative, empirically based expressions that describe the morphology of submarine canyon networks. Multibeam bathymetry data along the entire passive US Atlantic margin (USAM) and along the active central California margin near Monterey Bay provide an opportunity to examine the fine-scale morphology of 171 slope-sourced canyons. Log–log regression analyses of canyon thalweg gradient (S) versus up-canyon catchment area (A) are used to examine linkages between morphological domains and the generation and evolution of submarine sediment flows. For example, canyon reaches of the upper continental slope are characterized by steep, linear and/or convex longitudinal profiles, whereas reaches farther down canyon have distinctly concave longitudinal profiles. The transition between these geomorphic domains is inferred to represent the downslope transformation of debris flows into erosive, canyon-flushing turbidity flows. Over geologic timescales this process appears to leave behind a predictable geomorphic fingerprint that is dependent on the catchment area of the canyon head. Catchment area, in turn, may be a proxy for the volume of sediment released during geomorphically significant failures along the upper continental slope. Focused studies of slope-sourced submarine canyons may provide new insights into the relationships between fine-scale canyon morphology and down-canyon changes in sediment flow dynamics.

  16. Iron-Tolerant Cyanobacteria: Ecophysiology and Fingerprinting

    Brown, I. I.; Mummey, D.; Lindsey, J.; McKay, D. S.

    2006-01-01

    Although the iron-dependent physiology of marine and freshwater cyanobacterial strains has been the focus of extensive study, very few studies dedicated to the physiology and diversity of cyanobacteria inhabiting iron-depositing hot springs have been conducted. One of the few studies that have been conducted [B. Pierson, 1999] found that cyanobacterial members of iron depositing bacterial mat communities might increase the rate of iron oxidation in situ and that ferrous iron concentrations up to 1 mM significantly stimulated light dependent consumption of bicarbonate, suggesting a specific role for elevated iron in photosynthesis of cyanobacteria inhabiting iron-depositing hot springs. Our recent studies pertaining to the diversity and physiology of cyanobacteria populating iron-depositing hot springs in Great Yellowstone area (Western USA) indicated a number of different isolates exhibiting elevated tolerance to Fe(3+) (up to 1 mM). Moreover, stimulation of growth was observed with increased Fe(3+) (0.02-0.4 mM). Molecular fingerprinting of unialgal isolates revealed a new cyanobacterial genus and species Chroogloeocystis siderophila, an unicellular cyanobacterium with significant EPS sheath harboring colloidal Fe(3+) from iron enriched media. Our preliminary data suggest that some filamentous species of iron-tolerant cyanobacteria are capable of exocytosis of iron precipitated in cytoplasm. Prior to 2.4 Ga global oceans were likely significantly enriched in soluble iron [Lindsay et al, 2003], conditions which are not conducive to growth of most contemporary oxygenic cyanobacteria. Thus, iron-tolerant CB may have played important physiological and evolutionary roles in Earths history.

  17. Discrimination of Arcobacter butzleri isolates by polymerase chain reaction-mediated DNA fingerprinting

    Atabay, H. I.; Bang, Dang Duong; Aydin, F.

    2002-01-01

    Aims: The objective of this study was to subtype Arcobacter butzleri isolates using RAPD-PCR. Methods and Results: Thirty-five A. butzleri isolates obtained from chicken carcasses were examined. PCR-mediated DNA fingerprinting technique with primers of the variable sequence motifs was used...... to detect polymorphism within the isolates. Eleven distinct DNA profiles were obtained as follows: Of the 35 strains, 10 as profile 4; seven as profile 1; five as profile 3; three as profiles 2 and 9; two as profile 10; one as profiles 5, 6, 7, 8 and 11. Conclusions: Chicken carcasses sold in markets were...... found to be contaminated with several different strains of A. butzleri . RAPD-PCR technique was found to be a useful technique for distinguishing A. butzleri isolates. Significance and Impact of the Study: The presence of several different A. butzleri strains on chicken carcasses may indicate multiple...

  18. Oriented diffusion filtering for enhancing low-quality fingerprint images

    Gottschlich, C.; Schönlieb, C.-B.

    2012-01-01

    To enhance low-quality fingerprint images, we present a novel method that first estimates the local orientation of the fingerprint ridge and valley flow and next performs oriented diffusion filtering, followed by a locally adaptive contrast enhancement step. By applying the authors' new approach to low-quality images of the FVC2004 fingerprint databases, the authors are able to show its competitiveness with other state-of-the-art enhancement methods for fingerprints like curved Gabor filtering. A major advantage of oriented diffusion filtering over those is its computational efficiency. Combining oriented diffusion filtering with curved Gabor filters led to additional improvements and, to the best of the authors' knowledge, the lowest equal error rates achieved so far using MINDTCT and BOZORTH3 on the FVC2004 databases. The recognition performance and the computational efficiency of the method suggest to include oriented diffusion filtering as a standard image enhancement add-on module for real-time fingerprint recognition systems. In order to facilitate the reproduction of these results, an implementation of the oriented diffusion filtering for Matlab and GNU Octave is made available for download. © 2012 The Institution of Engineering and Technology.

  19. Oriented diffusion filtering for enhancing low-quality fingerprint images

    Gottschlich, C.

    2012-01-01

    To enhance low-quality fingerprint images, we present a novel method that first estimates the local orientation of the fingerprint ridge and valley flow and next performs oriented diffusion filtering, followed by a locally adaptive contrast enhancement step. By applying the authors\\' new approach to low-quality images of the FVC2004 fingerprint databases, the authors are able to show its competitiveness with other state-of-the-art enhancement methods for fingerprints like curved Gabor filtering. A major advantage of oriented diffusion filtering over those is its computational efficiency. Combining oriented diffusion filtering with curved Gabor filters led to additional improvements and, to the best of the authors\\' knowledge, the lowest equal error rates achieved so far using MINDTCT and BOZORTH3 on the FVC2004 databases. The recognition performance and the computational efficiency of the method suggest to include oriented diffusion filtering as a standard image enhancement add-on module for real-time fingerprint recognition systems. In order to facilitate the reproduction of these results, an implementation of the oriented diffusion filtering for Matlab and GNU Octave is made available for download. © 2012 The Institution of Engineering and Technology.

  20. Quantifying the provenance of aeolian sediments using multiple composite fingerprints

    Liu, Benli; Niu, Qinghe; Qu, Jianjun; Zu, Ruiping

    2016-09-01

    We introduce a new fingerprinting method that uses multiple composite fingerprints for studies of aeolian sediment provenance. We used this method to quantify the provenance of sediments on both sides of the Qinghai-Tibetan Railway (QTR) in the Cuona Lake section of the Tibetan Plateau (TP), in an environment characterized by aeolian and fluvial interactions. The method involves repeatedly solving a linear mixing model based on mass conservation; the model is not limited to spatial scale or transport types and uses all the tracer groups that passed the range check, Kruskal-Wallis H-test, and a strict analytical solution screening. The proportional estimates that result from using different composite fingerprints are highly variable; however, the average of these fingerprints has a greater accuracy and certainty than any single fingerprint. The results show that sand from the lake beach, hilly surface, and gullies contribute, respectively, 48%, 31% and 21% to the western railway sediments and 43%, 33% and 24% to the eastern railway sediments. The difference between contributions from various sources on either side of the railway, which may increase in the future, was clearly related to variations in local transport characteristics, a conclusion that is supported by grain size analysis. The construction of the QTR changed the local cycling of materials, and the difference in provenance between the sediments that are separated by the railway reflects the changed sedimentary conditions on either side of the railway. The effectiveness of this method suggests that it will be useful in other studies of aeolian sediments.

  1. Detecting anthropogenic climate change with an optimal fingerprint method

    Hegerl, G.C.; Storch, H. von; Hasselmann, K.; Santer, B.D.; Jones, P.D.

    1994-01-01

    We propose a general fingerprint strategy to detect anthropogenic climate change and present application to near surface temperature trends. An expected time-space-variable pattern of anthropogenic climate change (the 'signal') is identified through application of an appropriate optimally matched space-time filter (the 'fingerprint') to the observations. The signal and the fingerprint are represented in a space with sufficient observed and simulated data. The signal pattern is derived from a model-generated prediction of anthropogenic climate change. Application of the fingerprint filter to the data yields a scalar detection variable. The statistically optimal fingerprint is obtained by weighting the model-predicted pattern towards low-noise directions. A combination of model output and observations is used to estimate the noise characteristics of the detection variable, arising from the natural variability of climate in the absence of external forcing. We test then the null hypothesis that the observed climate change is part of natural climate variability. We conclude that a statistically significant externally induced warming has been observed, with the caveat of a possibly inadequate estimate of the internal climate variability. In order to attribute this warming uniquely to anthropogenic greenhouse gas forcing, more information on the climate's response to other forcing mechanisms (e.g. changes in solar radiation, volcanic or anthropogenic aerosols) and their interaction is needed. (orig./KW)

  2. Ridge Width Correlations between Inked Prints and Powdered Latent Fingerprints.

    De Alcaraz-Fossoul, Josep; Barrot-Feixat, Carme; Zapico, Sara C; Mancenido, Michelle; Broatch, Jennifer; Roberts, Katherine A; Carreras-Marin, Clara; Tasker, Jack

    2017-10-03

    A methodology to estimate the time of latent fingerprint deposition would be of great value to law enforcement and courts. It has been observed that ridge topography changes as latent prints age, including the widths of ridges that could be measured as a function of time. Crime suspects are commonly identified using fingerprint databases that contain reference inked tenprints (flat and rolled impressions). These can be of interest in aging studies as they provide baseline information relating to the original (nonaged) ridges' widths. In practice, the age of latent fingerprints could be estimated following a comparison process between the evidentiary aged print and the corresponding reference inked print. The present article explores possible correlations between inked and fresh latent fingerprints deposited on different substrates and visualized with TiO 2 . The results indicate that the ridge width of flat inked prints is most similar to fresh latent fingerprints , and these should be used as the comparison standard for future aging studies. © 2017 American Academy of Forensic Sciences.

  3. ULTRAVIOLET RAMAN SPECTRAL SIGNATURE ACQUISITION: UV RAMAN SPECTRAL FINGERPRINTS.

    SEDLACEK,III, A.J.FINFROCK,C.

    2002-09-01

    As a member of the science-support part of the ITT-lead LISA development program, BNL is tasked with the acquisition of UV Raman spectral fingerprints and associated scattering cross-sections for those chemicals-of-interest to the program's sponsor. In support of this role, the present report contains the first installment of UV Raman spectral fingerprint data on the initial subset of chemicals. Because of the unique nature associated with the acquisition of spectral fingerprints for use in spectral pattern matching algorithms (i.e., CLS, PLS, ANN) great care has been undertaken to maximize the signal-to-noise and to minimize unnecessary spectral subtractions, in an effort to provide the highest quality spectral fingerprints. This report is divided into 4 sections. The first is an Experimental section that outlines how the Raman spectra are performed. This is then followed by a section on Sample Handling. Following this, the spectral fingerprints are presented in the Results section where the data reduction process is outlined. Finally, a Photographs section is included.

  4. Nano-scale analysis of titanium dioxide fingerprint-development powders

    Reynolds, A J; Jones, B J; Sears, V; Bowman, V

    2008-01-01

    Titanium dioxide based powders are regularly used in the development of latent fingerprints on dark surfaces. For analysis of prints on adhesive tapes, the titanium dioxide is suspended in a surfactant and used in the form of a small particle reagent (SPR). Analysis of commercially available products shows varying levels of effectiveness of print development, with some powders adhering to the background as well as the print. Scanning electron microscopy (SEM) images of prints developed with different powders show a range of levels of aggregation of particles. Analytical transmission electron microscopy (TEM) of the fingerprint powder shows TiO 2 particles with a surrounding coating, tens of nanometres thick, consisting of Al and Si rich material. X ray photoelectron spectroscopy (XPS) is used to determine the composition and chemical state of the surface of the powders; with a penetration depth of approximately 10nm, this technique demonstrates differing Ti: Al: Si ratios and oxidation states between the surfaces of different powders. Levels of titanium detected with this technique demonstrate variation in the integrity of the surface coating. The thickness, integrity and composition of the Al/Si-based coating is related to the level of aggregation of TiO 2 particles and efficacy of print development.

  5. Nano-scale analysis of titanium dioxide fingerprint-development powders

    Reynolds, A J; Jones, B J [Experimental Techniques Centre, Brunei University, Kingston Lane, Uxbridge, Middlesex, UB8 3PH (United Kingdom); Sears, V; Bowman, V [Fingerprint and Footwear Forensics, Home Office Scientific Development Branch, Sandridge, St Albans, Hertfordshire, AL4 9HQ (United Kingdom)], E-mail: b.j.jones@physics.org

    2008-08-15

    Titanium dioxide based powders are regularly used in the development of latent fingerprints on dark surfaces. For analysis of prints on adhesive tapes, the titanium dioxide is suspended in a surfactant and used in the form of a small particle reagent (SPR). Analysis of commercially available products shows varying levels of effectiveness of print development, with some powders adhering to the background as well as the print. Scanning electron microscopy (SEM) images of prints developed with different powders show a range of levels of aggregation of particles. Analytical transmission electron microscopy (TEM) of the fingerprint powder shows TiO{sub 2} particles with a surrounding coating, tens of nanometres thick, consisting of Al and Si rich material. X ray photoelectron spectroscopy (XPS) is used to determine the composition and chemical state of the surface of the powders; with a penetration depth of approximately 10nm, this technique demonstrates differing Ti: Al: Si ratios and oxidation states between the surfaces of different powders. Levels of titanium detected with this technique demonstrate variation in the integrity of the surface coating. The thickness, integrity and composition of the Al/Si-based coating is related to the level of aggregation of TiO{sub 2} particles and efficacy of print development.

  6. Comparison of Quantifiler(®) Trio and InnoQuant™ human DNA quantification kits for detection of DNA degradation in developed and aged fingerprints.

    Goecker, Zachary C; Swiontek, Stephen E; Lakhtakia, Akhlesh; Roy, Reena

    2016-06-01

    The development techniques employed to visualize fingerprints collected from crime scenes as well as post-development ageing may result in the degradation of the DNA present in low quantities in such evidence samples. Amplification of the DNA samples with short tandem repeat (STR) amplification kits may result in partial DNA profiles. A comparative study of two commercially available quantification kits, Quantifiler(®) Trio and InnoQuant™, was performed on latent fingerprint samples that were either (i) developed using one of three different techniques and then aged in ambient conditions or (ii) undeveloped and then aged in ambient conditions. The three fingerprint development techniques used were: cyanoacrylate fuming, dusting with black powder, and the columnar-thin-film (CTF) technique. In order to determine the differences between the expected quantities and actual quantities of DNA, manually degraded samples generated by controlled exposure of DNA standards to ultraviolet radiation were also analyzed. A total of 144 fingerprint and 42 manually degraded DNA samples were processed in this study. The results indicate that the InnoQuant™ kit is capable of producing higher degradation ratios compared to the Quantifiler(®) Trio kit. This was an expected result since the degradation ratio is a relative value specific for a kit based on the length and extent of amplification of the two amplicons that vary from one kit to the other. Additionally, samples with lower concentrations of DNA yielded non-linear relationships of degradation ratio with the duration of aging, whereas samples with higher concentrations of DNA yielded quasi-linear relationships. None of the three development techniques produced a noticeably different degradation pattern when compared to undeveloped fingerprints, and therefore do not impede downstream DNA analysis. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  7. Secure fingerprint identification based on structural and microangiographic optical coherence tomography.

    Liu, Xuan; Zaki, Farzana; Wang, Yahui; Huang, Qiongdan; Mei, Xin; Wang, Jiangjun

    2017-03-10

    Optical coherence tomography (OCT) allows noncontact acquisition of fingerprints and hence is a highly promising technology in the field of biometrics. OCT can be used to acquire both structural and microangiographic images of fingerprints. Microangiographic OCT derives its contrast from the blood flow in the vasculature of viable skin tissue, and microangiographic fingerprint imaging is inherently immune to fake fingerprint attack. Therefore, dual-modality (structural and microangiographic) OCT imaging of fingerprints will enable more secure acquisition of biometric data, which has not been investigated before. Our study on fingerprint identification based on structural and microangiographic OCT imaging is, we believe, highly innovative. In this study, we performed OCT imaging study for fingerprint acquisition, and demonstrated the capability of dual-modality OCT imaging for the identification of fake fingerprints.

  8. Damage invariant and high security acquisition of the internal fingerprint using optical coherence tomography

    Darlow, Luke N

    2016-11-01

    Full Text Available representation they offer. Using an emerging fingerprint acquisition technology – optical coherence tomography – to access an internal fingerprint under the skin surface, this paper serves to address two limitations of conventional scanners: fingertip skin damage...

  9. Distortion analysis on binary representation of minutiae based fingerprint matching for match-on-card

    Mlambo, CS

    2016-12-01

    Full Text Available The fingerprint matching on the smart card has long been developed and recognized faster method than fingerprint matching on a computer or large capacity systems. There has been much research and activities concerned with improving the accuracy...

  10. Evaluating the change of directional patterns for fingerprints with missing singular points under rotation

    Dorasamy, Kribashnee

    2016-12-01

    Full Text Available Overcoming small inter-class variation when fingerprints have missing singular points (SPs) is one of the current challenges faced in fingerprint classification, since class information is scarce. Grouping the orientation fields to form Directional...

  11. Wavelet/scalar quantization compression standard for fingerprint images

    Brislawn, C.M.

    1996-06-12

    US Federal Bureau of Investigation (FBI) has recently formulated a national standard for digitization and compression of gray-scale fingerprint images. Fingerprints are scanned at a spatial resolution of 500 dots per inch, with 8 bits of gray-scale resolution. The compression algorithm for the resulting digital images is based on adaptive uniform scalar quantization of a discrete wavelet transform subband decomposition (wavelet/scalar quantization method). The FBI standard produces archival-quality images at compression ratios of around 15 to 1 and will allow the current database of paper fingerprint cards to be replaced by digital imagery. The compression standard specifies a class of potential encoders and a universal decoder with sufficient generality to reconstruct compressed images produced by any compliant encoder, allowing flexibility for future improvements in encoder technology. A compliance testing program is also being implemented to ensure high standards of image quality and interchangeability of data between different implementations.

  12. A STRONG SECURITY PROTOCOL AGAINST FINGERPRINT DATABASE ATTACKS

    U. Latha

    2013-08-01

    Full Text Available The Biometric data is subject to on-going changes and create a crucial problem in fingerprint database. To deal with this, a security protocol is proposed to protect the finger prints information from the prohibited users. Here, a security protocol is proposed to protect the finger prints information. The proposed system comprised of three phases namely, fingerprint reconstruction, feature extraction and development of trigon based security protocol. In fingerprint reconstruction, the different crack variance level finger prints images are reconstructed by the M-band Dual Tree Complex Wavelet Transform (DTCWT. After that features are extracted by binarization. A set of finger print images are utilized to evaluate the performance of security protocol and the result from this process guarantees the healthiness of the proposed trigon based security protocol. The implementation results show the effectiveness of proposed trigon based security protocol in protecting the finger print information and the achieved improvement in image reconstruction and the security process.

  13. AIR-MRF: Accelerated iterative reconstruction for magnetic resonance fingerprinting.

    Cline, Christopher C; Chen, Xiao; Mailhe, Boris; Wang, Qiu; Pfeuffer, Josef; Nittka, Mathias; Griswold, Mark A; Speier, Peter; Nadar, Mariappan S

    2017-09-01

    Existing approaches for reconstruction of multiparametric maps with magnetic resonance fingerprinting (MRF) are currently limited by their estimation accuracy and reconstruction time. We aimed to address these issues with a novel combination of iterative reconstruction, fingerprint compression, additional regularization, and accelerated dictionary search methods. The pipeline described here, accelerated iterative reconstruction for magnetic resonance fingerprinting (AIR-MRF), was evaluated with simulations as well as phantom and in vivo scans. We found that the AIR-MRF pipeline provided reduced parameter estimation errors compared to non-iterative and other iterative methods, particularly at shorter sequence lengths. Accelerated dictionary search methods incorporated into the iterative pipeline reduced the reconstruction time at little cost of quality. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Rock in Rio: forever young

    Ricardo Ferreira Freitas

    2014-12-01

    Full Text Available The purpose of this article is to discuss the role of Rock in Rio: The Musical, as herald of megafestival Rock in Rio. Driven by the success that musicals have reached in Brazil, we believe that the design of this spectacle of music, dance and staging renews the brand of the rock festival, once it adds the force of young and healthy bodies to its concept. Moreover, the musical provides Rock in Rio with some distance from the controversal trilogy of sex, drugs and rock and roll, a strong mark of past festivals around the world. Thus, the musical expands the possibilities of growth for the brand.

  15. Binary similarity measures for fingerprint analysis of qualitative metabolomic profiles.

    Rácz, Anita; Andrić, Filip; Bajusz, Dávid; Héberger, Károly

    2018-01-01

    Contemporary metabolomic fingerprinting is based on multiple spectrometric and chromatographic signals, used either alone or combined with structural and chemical information of metabolic markers at the qualitative and semiquantitative level. However, signal shifting, convolution, and matrix effects may compromise metabolomic patterns. Recent increase in the use of qualitative metabolomic data, described by the presence (1) or absence (0) of particular metabolites, demonstrates great potential in the field of metabolomic profiling and fingerprint analysis. The aim of this study is a comprehensive evaluation of binary similarity measures for the elucidation of patterns among samples of different botanical origin and various metabolomic profiles. Nine qualitative metabolomic data sets covering a wide range of natural products and metabolomic profiles were applied to assess 44 binary similarity measures for the fingerprinting of plant extracts and natural products. The measures were analyzed by the novel sum of ranking differences method (SRD), searching for the most promising candidates. Baroni-Urbani-Buser (BUB) and Hawkins-Dotson (HD) similarity coefficients were selected as the best measures by SRD and analysis of variance (ANOVA), while Dice (Di1), Yule, Russel-Rao, and Consonni-Todeschini 3 ranked the worst. ANOVA revealed that concordantly and intermediately symmetric similarity coefficients are better candidates for metabolomic fingerprinting than the asymmetric and correlation based ones. The fingerprint analysis based on the BUB and HD coefficients and qualitative metabolomic data performed equally well as the quantitative metabolomic profile analysis. Fingerprint analysis based on the qualitative metabolomic profiles and binary similarity measures proved to be a reliable way in finding the same/similar patterns in metabolomic data as that extracted from quantitative data.

  16. Reconstruction of molecular phylogeny of closely related Amorphophallus species of India using plastid DNA marker and fingerprinting approaches.

    Gholave, Avinash R; Pawar, Kiran D; Yadav, Shrirang R; Bapat, Vishwas A; Jadhav, Jyoti P

    2017-01-01

    Plastid DNA markers sequencing and DNA fingerprinting approaches were used and compared for resolving molecular phylogeny of closely related, previously unexplored Amorphophallus species of India. The utility of individual plastid markers namely rbcL , matK , trnH - psbA , trnLC - trnLD , their combined dataset and two fingerprinting techniques viz. RAPD and ISSR were tested for their efficacy to resolves Amorphophallus species into three sections specific clades namely Rhaphiophallus , Conophallus and Amorphophallus . In the present study, sequences of these four plastid DNA regions as well as RAPD and ISSR profiles of 16 Amorphophallus species together with six varieties of two species were generated and analyzed. Maximum likelihood and Bayesian Inference based construction of phylogenetic trees indicated that among the four plastid DNA regions tested individually and their combined dataset, rbcL was found best suited for resolving closely related Amorphophallus species into section specific clades. When analyzed individually, rbcL exhibited better discrimination ability than matK , trnH - psbA , trnLC - trnLD and combination of all four tested plastid markers. Among two fingerprinting techniques used, the resolution of Amorphophallus species using RAPD was better than ISSR and combination of RAPD +ISSR and in congruence with resolution based on rbcL .

  17. Moving mountains in Rio

    Runnalls, D.

    1992-01-01

    The June 1992 United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro has been planned more as a discussion of environment and development, rather than sustainable development as suggested by the 1987 World Commission on Environment and Development (the Brundtland Commission). The Canadian agenda for UNCED is like that of most of the developed countries, and focuses mainly on climatic change, deforestation, loss of biodiversity in the tropics, and health of the oceans. The agenda of the developing countries is based on the knowledge that most of these global problems have been caused or aggravated by the industrialized countries. The developing countries fear that actions imposed to solve environmental problems will threaten their economic development. A key demand from the developing countries is a commitment by developed countries to reduce their greenhouse gas emissions, leaving space for the developing countries to increase their emissions as they develop. There is little or no pressure on governments in the developed world to come to such a comprehensive deal. For Canada, much remains to be done in setting national priorities, and many of the issues to be discussed at UNCED are under provincial jurisdiction

  18. Zone-based RSS Reporting for Location Fingerprinting

    Kjærgaard, Mikkel Baun; Treu, Georg; Linnhoff–Popien, Claudia

    2007-01-01

    In typical location fingerprinting systems a tracked terminal reports sampled Received Signal Strength (RSS) values to a location server, which estimates its position based on a database of pre-recorded RSS fingerprints. So far, poll-based and periodic RSS reporting has been proposed. However......, for supporting proactive Location-based Services (LBSs), triggered by pre-defined spatial events, the periodic protocol is inefficient. Hence, this paper introduces zone-based RSS reporting: the location server translates geographical zones defined by the LBS into RSS-based representations, which are dynamically...

  19. LED intense headband light source for fingerprint analysis

    Villa-Aleman, Eliel

    2005-03-08

    A portable, lightweight and high-intensity light source for detecting and analyzing fingerprints during field investigation. On-site field analysis requires long hours of mobile analysis. In one embodiment, the present invention comprises a plurality of light emitting diodes; a power source; and a personal attachment means; wherein the light emitting diodes are powered by the power source, and wherein the power source and the light emitting diodes are attached to the personal attachment means to produce a personal light source for on-site analysis of latent fingerprints. The present invention is available for other applications as well.

  20. Fingerprint-based structure retrieval using electron density.

    Yin, Shuangye; Dokholyan, Nikolay V

    2011-03-01

    We present a computational approach that can quickly search a large protein structural database to identify structures that fit a given electron density, such as determined by cryo-electron microscopy. We use geometric invariants (fingerprints) constructed using 3D Zernike moments to describe the electron density, and reduce the problem of fitting of the structure to the electron density to simple fingerprint comparison. Using this approach, we are able to screen the entire Protein Data Bank and identify structures that fit two experimental electron densities determined by cryo-electron microscopy. Copyright © 2010 Wiley-Liss, Inc.

  1. Nickel and binary metal mixture responses in Daphnia magna: Molecular fingerprints and (sub)organismal effects

    Vandenbrouck, Tine; Soetaert, Anneleen; Ven, Karlijn van der; Blust, Ronny; Coen, Wim de

    2009-01-01

    The recent development of a custom cDNA microarray platform for one of the standard organisms in aquatic toxicology, Daphnia magna, opened up new ways to mechanistic insights of toxicological responses. In this study, the mRNA expression of several genes and (sub)organismal responses (Cellular Energy Allocation, growth) were assayed after short-term waterborne metal exposure. Microarray analysis of Ni-exposed daphnids revealed several affected functional gene classes, of which the largest ones were involved in different metabolic processes (mainly protein and chitin related processes), cuticula turnover, transport and signal transduction. Furthermore, transcription of genes involved in oxygen transport and heme metabolism (haemoglobin, δ-aminolevilunate synthase) was down-regulated. Applying a Partial Least Squares regression on nickel fingerprints and biochemical (sub)organismal parameters revealed a set of co-varying genes (haemoglobin, RNA terminal phosphate cyclase, a ribosomal protein and an 'unknown' gene fragment). An inverse relationship was seen between the mRNA expression levels of different cuticula proteins and available energy reserves. In addition to the nickel exposure, daphnids were exposed to binary mixtures of nickel and cadmium or nickel and lead. Using multivariate analysis techniques, the mixture mRNA expression fingerprints (Ni 2+ + Cd 2+ , Ni 2+ + Pb 2+ ) were compared to those of the single metal treatments (Ni 2+ , Cd 2+ , Pb 2+ ). It was hypothesized that the molecular fingerprints of the mixtures would be additive combinations of the gene transcription profiles of the individual compounds present in the mixture. However, our results clearly showed additionally affected pathways after mixture treatment (e.g. additional affected genes involved in carbohydrate catabolic processes and proteolysis), indicating interactive molecular responses which are not merely the additive sum of the individual metals. These findings, although indicative of

  2. Fingerprinting analysis of oil samples for inter-laboratory Round Robin, 2007

    Yang, C.; Wang, Z.; Hollebone, B.; Brown, C.E.; Landriault, M.; Shang, D.; Losier, R.; Cook, A.

    2008-01-01

    The oil from an oil spill must undergo a complete chemical characterization in order to determine the source of the oil, to distinguish the spilled oil from background hydrocarbons and to evaluate the extent of impact. A study was conducted to determine the ability of international analytical laboratories to independently conduct forensic oil analysis and identification. A Round Robin study was conducted in which advanced chemical fingerprinting and data interpretation techniques were used to differentiate the types and sources of spilled oils. The participants of the Round Robin exercise were the Institute of Inland Water Management and Waste Water Treatment (RIZA) in the Netherlands and the Federal Maritime and Hydrographic Agency (BSH) in Germany. In May 2007, 6 oil samples were distributed to the participants. In the artificial oil spill scenario, 2 oil samples were considered as candidate sources and the other 4 samples were labeled as spilled oils. No other information about these oils was provided before submission of final results. Chemical fingerprinting was carried out using gas chromatography, flame ionization detection and mass spectrometry along with statistical data to determine the source of the spill. N-alkanes, alkylated polyaromatic hydrocarbons, biomarker terpanes and steranes and triaromatic steranes were normalized to C 30 17α(H)21β(H)-hopane and then semi-quantitated. Thirty diagnostic ratios of target compounds were calculated from their peak heights and areas at selected ions. Results of the 2 source samples were compared with 4 spill samples. Tiered fingerprinting analysis revealed that source oil 1 was a non-match with spill samples 3 and 4, but a probable match with spill samples 5 and 6. Source sample 2 did not match any of the 4 spilled oils. A lack of background information essential to oil spill identification made it impossible to draw an unambiguous conclusion. 14 refs., 4 tabs., 6 figs

  3. Fingerprinting analysis of oil samples for inter-laboratory Round Robin, 2007

    Yang, C.; Wang, Z.; Hollebone, B.; Brown, C.E.; Landriault, M. [Environment Canada, Ottawa, ON (Canada). Emergencies Science and Technology Division, Science and Technology Branch, Environmental Science and Technology Centre; Shang, D. [Environment Canada, North Vancouver, BC (Canada). Pacific Environmental Science Centre; Losier, R.; Cook, A. [Environment Canada, Moncton, NB (Canada). Environmental Science Centre

    2008-07-01

    The oil from an oil spill must undergo a complete chemical characterization in order to determine the source of the oil, to distinguish the spilled oil from background hydrocarbons and to evaluate the extent of impact. A study was conducted to determine the ability of international analytical laboratories to independently conduct forensic oil analysis and identification. A Round Robin study was conducted in which advanced chemical fingerprinting and data interpretation techniques were used to differentiate the types and sources of spilled oils. The participants of the Round Robin exercise were the Institute of Inland Water Management and Waste Water Treatment (RIZA) in the Netherlands and the Federal Maritime and Hydrographic Agency (BSH) in Germany. In May 2007, 6 oil samples were distributed to the participants. In the artificial oil spill scenario, 2 oil samples were considered as candidate sources and the other 4 samples were labeled as spilled oils. No other information about these oils was provided before submission of final results. Chemical fingerprinting was carried out using gas chromatography, flame ionization detection and mass spectrometry along with statistical data to determine the source of the spill. N-alkanes, alkylated polyaromatic hydrocarbons, biomarker terpanes and steranes and triaromatic steranes were normalized to C{sub 30} 17{alpha}(H)21{beta}(H)-hopane and then semi-quantitated. Thirty diagnostic ratios of target compounds were calculated from their peak heights and areas at selected ions. Results of the 2 source samples were compared with 4 spill samples. Tiered fingerprinting analysis revealed that source oil 1 was a non-match with spill samples 3 and 4, but a probable match with spill samples 5 and 6. Source sample 2 did not match any of the 4 spilled oils. A lack of background information essential to oil spill identification made it impossible to draw an unambiguous conclusion. 14 refs., 4 tabs., 6 figs.

  4. Electrochemical behaviour of brass in chloride solution concentrations found in eccrine fingerprint sweat

    Bond, John W., E-mail: jwb13@le.ac.uk [Department of Chemistry, George Porter Building, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom); Lieu, Elaine [Department of Physics and Astronomy, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom)

    2014-09-15

    Highlights: • Corrosion of brass in NaCl concentrations found in eccrine sweat was investigated. • Concentrations < 0.2 M produce a layer of mainly zinc oxide after 24 h. • A concentration of 0.2 M enables active corrosion of brass at room temperature. • 0.2 M NaCl gives both zinc and copper dissolution. • 24-h immersion of brass in 0.2 M NaCl gives an oxide film thickness of 1.3 nm. - Abstract: In this work, the corrosion properties of α phase brass immersed in concentrations of aqueous NaCl solutions that are typically found in eccrine fingerprint sweat and range between 0.01 M and 0.2 M have been analysed. Analysis methods employed were electrochemical techniques, X-ray photoelectron spectroscopy and optical profiling. For NaCl concentrations <0.2 M, active corrosion did not occur although, after a period of 24 h, a passivating layer of mainly zinc oxide formed. At a concentration of 0.2 M active corrosion did occur, with measured corrosion potentials consistent with both brass and copper dissolution. A 1 h contact time at this concentration (0.2 M) resulted in the formation of a zinc oxide passivating layer with the surface ratio of zinc oxide to copper oxide increasing with time. Film thickness was calculated to be of the order of 1.3 nm after 24 h contact. Formation of oxide layers on brass by fingerprint sweat as observed here may well have implications for the successful investigation of crime by the visualisation of corrosion fingerprint ridge patterns or the reduction of hospital environmental contamination by hand contact with brass objects such as door handles or taps.

  5. Towards a complete rule-based classification approach for flat fingerprints

    Webb, L

    2014-12-01

    Full Text Available fingerprints. This work implements an algorithm which includes new rules to account for more instances of flat fingerprints with missing singular points, specifically when the delta of a Right Loop or Left Loop fingerprint is not captured, when one of the loops...

  6. Novel fingerprint re-alignment solution that uses the TFCP as a reference

    Msiza, IS

    2011-08-01

    Full Text Available , independent, and efficient for all types of fingerprints. It, in particular, is useful when dealing with the type of fingerprints that belong to the Plain Arch (PA) fingerprint class. The credibility of this proposed solution is interrogated through its...

  7. Performance analysis of a hybrid fingerprint extracted from optical coherence tomography fingertip scans

    Darlow, Luke N

    2016-06-01

    Full Text Available The Hybrid fingerprint is a local-quality-specific blend of the surface and internal fingerprints, extracted from optical coherence tomography scans. Owing to its origin, and the manner in which it is obtained, the Hybrid fingerprint is a high...

  8. Complexity and distortion analysis on methods for unrolling 3D to 2D fingerprints

    Mlambo, CS

    2015-11-01

    Full Text Available and studies involve the application of three-dimensional (3D) fingerprint systems, where the details of the finger are captured using 3D technologies and the captured 3D fingerprints are converted into two-dimensional (2D) fingerprints. This paper presents a...

  9. Uniform Local Binary Pattern for Fingerprint Liveness Detection in the Gaussian Pyramid

    Yujia Jiang

    2018-01-01

    Full Text Available Fingerprint recognition schemas are widely used in our daily life, such as Door Security, Identification, and Phone Verification. However, the existing problem is that fingerprint recognition systems are easily tricked by fake fingerprints for collaboration. Therefore, designing a fingerprint liveness detection module in fingerprint recognition systems is necessary. To solve the above problem and discriminate true fingerprint from fake ones, a novel software-based liveness detection approach using uniform local binary pattern (ULBP in spatial pyramid is applied to recognize fingerprint liveness in this paper. Firstly, preprocessing operation for each fingerprint is necessary. Then, to solve image rotation and scale invariance, three-layer spatial pyramids of fingerprints are introduced in this paper. Next, texture information for three layers spatial pyramids is described by using uniform local binary pattern to extract features of given fingerprints. The accuracy of our proposed method has been compared with several state-of-the-art methods in fingerprint liveness detection. Experiments based on standard databases, taken from Liveness Detection Competition 2013 composed of four different fingerprint sensors, have been carried out. Finally, classifier model based on extracted features is trained using SVM classifier. Experimental results present that our proposed method can achieve high recognition accuracy compared with other methods.

  10. Rio Chama Floodplain Management Study

    Earth Data Analysis Center, University of New Mexico — The Village of Chama requested the Soil Conservation Service, through the Upper Chama Soil and Water Conservation District, to conduct a study of the Rio Chama and...

  11. A novel approach for differentiating pathogenic and non-pathogenic Leptospira based on molecular fingerprinting.

    Xiao, Di; Zhang, Cuicai; Zhang, Huifang; Li, Xiuwen; Jiang, Xiugao; Zhang, Jianzhong

    2015-04-24

    Leptospirosis is a worldwide, deadly zoonotic disease. Pathogenic Leptospira causes leptospirosis. The rapid and accurate identification of pathogenic and non-pathogenic Leptospira strains is essential for appropriate therapeutic management and timely intervention for infection control. The molecular fingerprint is a simple and rapid alternative tool for microorganisms identification, which is based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). In this study, molecular fingerprint was performed to identify pathogenic strains of Leptospira. Phylogenetic analysis based on 16S rRNA gene sequences was used as the reference method. In addition, a label-free technique was used to reveal the different proteins of pathogenic or non-pathogenic Leptospira. A reference database was constructed using 30 Leptospira strains, including 16 pathogenic strains and 14 non-pathogenic strains. Two super reference spectra that were associated with pathogenicity were established. Overall, 33 Leptospira strains were used for validation, and 32 of 33 Leptospira strains could be identified on the species level and all the 33 could be classified as pathogenic or non-pathogenic. The super reference spectra and the major spectra projection (MSP) dendrogram correctly categorized the Leptospira strains into pathogenic and non-pathogenic groups, which was consistent with the 16S rRNA reference methods. Between the pathogenic and non-pathogenic strains, 108 proteins were differentially expressed. molecular fingerprint is an alternative to conventional molecular identification and can rapidly distinguish between pathogenic and non-pathogenic Leptospira strains. Therefore, molecular fingerprint may play an important role in the clinical diagnosis, treatment, surveillance, and tracking of epidemic outbreaks of leptospirosis. Leptospirosis is a worldwide zoonosis that is caused by spirochetes of the genus Leptospira. Leptospirosis is a serious zoonotic

  12. Evaluation of molecular typing techniques to assign genetic diversity among Saccharomyces cerevisiae strains

    Baleiras Couto, M.M.; Eijsma, B.; Hofstra, H.; Huis in 't Veld, J.H.J.; Vossen, J.M.B.M. van der

    1996-01-01

    Discrimination of strains within the species Saccharomyces cerevisiae was demonstrated by the use of four different techniques to type 15 strains isolated from spoiled wine and beer. Random amplified polymorphic DNA with specific oligonucleotides and PCR fingerprinting with the microsatellite

  13. H.264/AVC digital fingerprinting based on spatio-temporal just noticeable distortion

    Ait Saadi, Karima; Bouridane, Ahmed; Guessoum, Abderrezak

    2014-01-01

    This paper presents a robust adaptive embedding scheme using a modified Spatio-Temporal noticeable distortion (JND) model that is designed for tracing the distribution of the H.264/AVC video content and protecting them from unauthorized redistribution. The Embedding process is performed during coding process in selected macroblocks type Intra 4x4 within I-Frame. The method uses spread-spectrum technique in order to obtain robustness against collusion attacks and the JND model to dynamically adjust the embedding strength and control the energy of the embedded fingerprints so as to ensure their imperceptibility. Linear and non linear collusion attacks are performed to show the robustness of the proposed technique against collusion attacks while maintaining visual quality unchanged.

  14. Total protein electrophoresis and RAPD fingerprinting analysis for the identification of Aeromonas at the species level Análise eletroforética de proteínas totais e marcadores de RAPD na identificação de Aeromonas ao nível de espécie

    Ana Paula Longaray Delamare

    2002-12-01

    Full Text Available Fifteen well-defined strains of Aeromonas of thirteen species were analyzed by SDS protein electrophoretic analysis (SDS-PAGE and random amplified polymorphic DNA analysis (RAPD. The comparison between the patterns obtained by both methods allowed differentiating all the strains. Clusters formed by the unweighted pair group method with arithmetic averages applied to protein data correlates with the genetic and biochemical information about the species. The results show that protein fingerprinting has the potential to differentiate Aeromonas species, but the low qualitative variation indicates that this technique is not efficient for the characterization of strains within a species. Conversely, RAPD fingerprinting allows the identification of strains but the high variability limits its potential as an aiding method for species identification.Quinze linhagens de Aeromonas pertencentes a treze espécies foram avaliadas através de eletroforese de proteínas totais (SDS-PAGE e segmentos de DNA amplificados ao acaso (RAPD. A comparação entre os padrões obtidos por ambos métodos permitiu diferenciar todas as linhagens. Agrupamentos formados com base nos dados protéicos mostraram relação com informações bioquímicas e genéticas a respeito das espécies. Os resultados mostraram que análises protéicas têm potencial para diferenciar espécies de Aeromonas, mas a baixa variação qualitativa indica que esta técnica não é eficiente para a caracterização entre linhagens dentro de espécies. Ao contrário, marcadores de RAPD permitem identificar linhagens, mas a alta variabilidade limita seu potencial como método auxiliar na identificação de espécies.

  15. Sediment fingerprinting experiments to test the sensitivity of multivariate mixing models

    Gaspar, Leticia; Blake, Will; Smith, Hugh; Navas, Ana

    2014-05-01

    Sediment fingerprinting techniques provide insight into the dynamics of sediment transfer processes and support for catchment management decisions. As questions being asked of fingerprinting datasets become increasingly complex, validation of model output and sensitivity tests are increasingly important. This study adopts an experimental approach to explore the validity and sensitivity of mixing model outputs for materials with contrasting geochemical and particle size composition. The experiments reported here focused on (i) the sensitivity of model output to different fingerprint selection procedures and (ii) the influence of source material particle size distributions on model output. Five soils with significantly different geochemistry, soil organic matter and particle size distributions were selected as experimental source materials. A total of twelve sediment mixtures were prepared in the laboratory by combining different quantified proportions of the Kruskal-Wallis test, Discriminant Function Analysis (DFA), Principal Component Analysis (PCA), or correlation matrix). Summary results for the use of the mixing model with the different sets of fingerprint properties for the twelve mixed soils were reasonably consistent with the initial mixing percentages initially known. Given the experimental nature of the work and dry mixing of materials, geochemical conservative behavior was assumed for all elements, even for those that might be disregarded in aquatic systems (e.g. P). In general, the best fits between actual and modeled proportions were found using a set of nine tracer properties (Sr, Rb, Fe, Ti, Ca, Al, P, Si, K, Si) that were derived using DFA coupled with a multivariate stepwise algorithm, with errors between real and estimated value that did not exceed 6.7 % and values of GOF above 94.5 %. The second set of experiments aimed to explore the sensitivity of model output to variability in the particle size of source materials assuming that a degree of

  16. Typing of Mycoplasma pneumoniae by PCR-mediated DNA fingerprinting

    Ursi, D; Ieven, M; van Bever, H; Quint, W; Niesters, H G; Goossens, H

    PCR fingerprinting was used to characterize clinical isolates of Mycoplasma pneumoniae. Among 24 strains tested, two types were distinguished. Nineteen strains belonged to type 1, whereas only 5 strains belonged to type 2. The majority of strains isolated since 1991 in Belgium belong to type 1. No

  17. [HPTLC fingerprint analysis of andrographolides from Andrographis paniculata].

    Shao, Yan-Hua; Wang, Jian-Gang; Lai, Xiao-Ping; Wu, Xiang-Wei; Ding, Ping

    2014-02-01

    To establish the high-performance thin layer chromatography (HPTLC) fingerprint of andrographolides from Andrographis paniculata, and to valuate the fingerprint similarity of samples from different habitats, markets, used parts and so on. Chromatographic conditions were as follows: stationary phase: precoated HPTLC GF254 silica-gel plate (20 cm x 10 cm); developing solvent system: chloroform-toluene-methanol (80:10:15); Relative humidity: 42%; Color development reagent: 5% H2SO4 ethanolic solution, heating at 105 degrees C and observing the fluorescent chromatogram in a UV cabinet at 366 nm. The common patterns of HPTLC fingerprint were obtained through CHROMAP 1.5 solution software. The HPTLC fingerprint of andrographolides was consisted of 9 characteristic peaks (fluorescent bands) including andrographolide, neoandrographolide and dehydroandrographolide which were chemical reference substances. The investigation and analysis of 51 batches of Andrographis paniculata showed that there were remarkable differences among different samples, so was the content of andrographolide and total lactones. This method is simple and rapid, which can serve as an effective identification and quality assessment method for Andrographis paniculata.

  18. Pemanfaatan Biometric Fingerprint sebagai Media Pembayaran Transjakarta Berbasis Electronic Money

    Muhajir, Ahmad; Ristiyanti, Lia; Harsono, Shabrina Utami

    2017-01-01

    Penelitian ini bertujuan untuk mengetahui pemanfaatan lain dari sidik jari sebagaialternative media pembayaran berbasis uang elektronik pada Transjakarta. Penggunaan sidik jaridipilih karena sidik jari merupakan identitas manusia yang tidak dapat diganti atau dirubah. Padapenelitian ini menggunakan Deskriptif Studies karena bertujuan untuk memberikan gambaransecara sistematis dan akurat mengenai Pemanfaatan Biometric Fingerprint sebagai mediapemabayaran Transjakarta berbasis E-Money. Dalam me...

  19. Image-based fingerprint verification system using LabVIEW

    Sunil K. Singla

    2008-09-01

    Full Text Available Biometric-based identification/verification systems provide a solution to the security concerns in the modern world where machine is replacing human in every aspect of life. Fingerprints, because of their uniqueness, are the most widely used and highly accepted biometrics. Fingerprint biometric systems are either minutiae-based or pattern learning (image based. The minutiae-based algorithm depends upon the local discontinuities in the ridge flow pattern and are used when template size is important while image-based matching algorithm uses both the micro and macro feature of a fingerprint and is used if fast response is required. In the present paper an image-based fingerprint verification system is discussed. The proposed method uses a learning phase, which is not present in conventional image-based systems. The learning phase uses pseudo random sub-sampling, which reduces the number of comparisons needed in the matching stage. This system has been developed using LabVIEW (Laboratory Virtual Instrument Engineering Workbench toolbox version 6i. The availability of datalog files in LabVIEW makes it one of the most promising candidates for its usage as a database. Datalog files can access and manipulate data and complex data structures quickly and easily. It makes writing and reading much faster. After extensive experimentation involving a large number of samples and different learning sizes, high accuracy with learning image size of 100 100 and a threshold value of 700 (1000 being the perfect match has been achieved.

  20. Bayesian estimation of multicomponent relaxation parameters in magnetic resonance fingerprinting.

    McGivney, Debra; Deshmane, Anagha; Jiang, Yun; Ma, Dan; Badve, Chaitra; Sloan, Andrew; Gulani, Vikas; Griswold, Mark

    2018-07-01

    To estimate multiple components within a single voxel in magnetic resonance fingerprinting when the number and types of tissues comprising the voxel are not known a priori. Multiple tissue components within a single voxel are potentially separable with magnetic resonance fingerprinting as a result of differences in signal evolutions of each component. The Bayesian framework for inverse problems provides a natural and flexible setting for solving this problem when the tissue composition per voxel is unknown. Assuming that only a few entries from the dictionary contribute to a mixed signal, sparsity-promoting priors can be placed upon the solution. An iterative algorithm is applied to compute the maximum a posteriori estimator of the posterior probability density to determine the magnetic resonance fingerprinting dictionary entries that contribute most significantly to mixed or pure voxels. Simulation results show that the algorithm is robust in finding the component tissues of mixed voxels. Preliminary in vivo data confirm this result, and show good agreement in voxels containing pure tissue. The Bayesian framework and algorithm shown provide accurate solutions for the partial-volume problem in magnetic resonance fingerprinting. The flexibility of the method will allow further study into different priors and hyperpriors that can be applied in the model. Magn Reson Med 80:159-170, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

  1. Typing of Mycoplasma pneumoniae by PCR-mediated DNA fingerprinting

    Ursi, D; Ieven, M; van Bever, H; Quint, W; Niesters, H G; Goossens, H

    1994-01-01

    PCR fingerprinting was used to characterize clinical isolates of Mycoplasma pneumoniae. Among 24 strains tested, two types were distinguished. Nineteen strains belonged to type 1, whereas only 5 strains belonged to type 2. The majority of strains isolated since 1991 in Belgium belong to type 1. No

  2. 8 CFR 1240.38 - Fingerprinting of excluded aliens.

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Fingerprinting of excluded aliens. 1240.38 Section 1240.38 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS PROCEEDINGS TO DETERMINE REMOVABILITY OF ALIENS IN THE UNITED STATES Exclusion of...

  3. Combining smart lighting and radio fingerprinting for improved indoor localization

    Kanaris, Loizos; Kokkinis, Akis; Liotta, Antonio; Stavrou, Stavros

    2017-01-01

    This work proposes a hybrid indoor positioning system, which combines a minimal smart lighting deployment for Visible Light Positioning (VPL) purposes, with an IEEE 802.11 RSS Fingerprint-based Indoor Positioning System. Such a hybrid deployment improves the localization performance by utilizing the

  4. Similarity score computation for minutiae-based fingerprint recognition

    Khanyile, NP

    2014-09-01

    Full Text Available This paper identifies and analyses the factors that contribute to the similarity between two sets of minutiae points as well as the probability that two sets of minutiae points were extracted from fingerprints of the same finger. Minutiae...

  5. On the feasibility of device fingerprinting in industrial control systems

    Caselli, M.; Hadziosmanovic, D.; Zambon, Emmanuele; Kargl, Frank; Luiijf, Eric; Hartel, Pieter H.

    2013-01-01

    As Industrial Control Systems (ICS) and standard IT networks are becoming one heterogeneous entity, there has been an increasing effort in adjusting common security tools and methodologies to fit the industrial environment. Fingerprinting of industrial devices is still an unexplored research field.

  6. An investigation of face and fingerprint feature-fusion guidelines

    Brown, Dane

    2016-05-01

    Full Text Available There are a lack of multi-modal biometric fusion guidelines at the feature-level. This paper investigates face and fingerprint features in the form of their strengths and weaknesses. This serves as a set of guidelines to authors that are planning...

  7. Detection of cores in fingerprints with improved dimension reduction

    Bazen, A.M.; Veldhuis, Raymond N.J.

    In this paper, we present a statistical approach to core detection in fingerprint images that is based on the likelihood ratio, using models of variation of core templates and randomly chosen templates. Additionally, we propose an alternative dimension reduction method. Unlike standard linear

  8. Cleaning and Processing RSS measurements for Location Fingerprinting

    Kjærgaard, Mikkel Baun

    2007-01-01

    Handling variations in sampled Received Signal Strength (RSS) is neassary for achieving robust location fingerprinting (LF). Current research has only proposed limited system-specific models for how to handle the cleaning of RSS variations. However, this paper propose a novel model for both...

  9. cultivars and identification of genotype-specific fingerprints using ...

    Home; Journals; Journal of Genetics; Volume 89; Online resources. Diversity in Indian barley (Hordeum vulgare) cultivars and identification of genotype-specific fingerprints using microsatellite markers. S. K. Jaiswal Shree P. Pandey S. Sharma R. Prasad L. C. Prasad R. P. S. Verma Arun K. Joshi. Volume 89 Online ...

  10. Development and Validation of Improved Method for Fingerprint ...

    Purpose: To develop and validate an improved method by capillary zone electrophoresis with photodiode array detection for the fingerprint analysis of Ligusticum chuanxiong Hort. (Rhizoma Chuanxiong). Methods: The optimum high performance capillary electrophoresis (HPCE) conditions were 30 mM borax containing 5 ...

  11. Atomistic fingerprint of hyaluronan-CD44 binding

    Vuorio, Joni; Vattulainen, Ilpo; Martinez-Seara, Hector

    2017-01-01

    that hyaluronan can bind CD44 with three topographically different binding modes that in unison define an interaction fingerprint, thus providing a plausible explanation for the disagreement between the earlier studies. Our results confirm that the known crystallographic mode is the strongest of the three binding...

  12. Serum protein fingerprint of patients with gastric cancer by SELDI ...

    To study the serum protein fingerprint of patients with gastric cancer and to screen for protein molecules closely related to gastric cancer during the onset and progression of the disease using surface-enhanced laser desorption and ionization time-of-flight mass spectrometry (SELDI-TOF-MS). Serum samples from 80 gastric ...

  13. Isozyme-based genetic fingerprinting of Manihot sp

    Prof. Ogunji

    1973-06-22

    Jun 22, 1973 ... Isozyme-based genetic fingerprinting of Manihot sp. Efisue, A. A.. Development of Crop & Soil Science, University of Port Harcourt P.M.B. 5323 Choba, Port Harcourt,. Rivers State, Nigeria. (Received 29:10:13, Accepted 20:12:13). Abstract. Many cassava varieties have been released into farmers' fields in ...

  14. Verification of Organic Feed Identity by Fatty Acid Fingerprinting

    Tres, A.; Ruth, van S.M.

    2011-01-01

    The origin and authenticity of feed for laying hens is an important and fraud-susceptible aspect in the production of organic eggs. Chemical fingerprinting in combination with chemometric methods is increasingly used in conjunction with administrative controls to verify and safeguard the

  15. DNA fingerprinting based on simple sequence repeat (SSR ...

    New varieties of sugarcane are protected using morphological descriptors, which have limitations in identifying morphologically similar cultivars. Development of a reliable DNA fingerprint system for identification of new varieties would contribute greatly to the breeding of these species. Microsatellite markers are tools with ...

  16. Transparent Fingerprint Sensor System for Large Flat Panel Display

    Wonkuk Seo

    2018-01-01

    Full Text Available In this paper, we introduce a transparent fingerprint sensing system using a thin film transistor (TFT sensor panel, based on a self-capacitive sensing scheme. An armorphousindium gallium zinc oxide (a-IGZO TFT sensor array and associated custom Read-Out IC (ROIC are implemented for the system. The sensor panel has a 200 × 200 pixel array and each pixel size is as small as 50 μm × 50 μm. The ROIC uses only eight analog front-end (AFE amplifier stages along with a successive approximation analog-to-digital converter (SAR ADC. To get the fingerprint image data from the sensor array, the ROIC senses a capacitance, which is formed by a cover glass material between a human finger and an electrode of each pixel of the sensor array. Three methods are reviewed for estimating the self-capacitance. The measurement result demonstrates that the transparent fingerprint sensor system has an ability to differentiate a human finger’s ridges and valleys through the fingerprint sensor array.

  17. Transparent Fingerprint Sensor System for Large Flat Panel Display.

    Seo, Wonkuk; Pi, Jae-Eun; Cho, Sung Haeung; Kang, Seung-Youl; Ahn, Seong-Deok; Hwang, Chi-Sun; Jeon, Ho-Sik; Kim, Jong-Uk; Lee, Myunghee

    2018-01-19

    In this paper, we introduce a transparent fingerprint sensing system using a thin film transistor (TFT) sensor panel, based on a self-capacitive sensing scheme. An armorphousindium gallium zinc oxide (a-IGZO) TFT sensor array and associated custom Read-Out IC (ROIC) are implemented for the system. The sensor panel has a 200 × 200 pixel array and each pixel size is as small as 50 μm × 50 μm. The ROIC uses only eight analog front-end (AFE) amplifier stages along with a successive approximation analog-to-digital converter (SAR ADC). To get the fingerprint image data from the sensor array, the ROIC senses a capacitance, which is formed by a cover glass material between a human finger and an electrode of each pixel of the sensor array. Three methods are reviewed for estimating the self-capacitance. The measurement result demonstrates that the transparent fingerprint sensor system has an ability to differentiate a human finger's ridges and valleys through the fingerprint sensor array.

  18. Laser mass spectrometry for DNA fingerprinting for forensic applications

    Chen, C. H. Winston; Tang, Kai; Taranenko, N. I.; Allman, S. L.; Ch'ang, L. Y.

    1994-10-01

    The application of DNA fingerprinting has become very broad in forensic analysis, patient identification, diagnostic medicine, and wildlife poaching, since every individual's DNA structure is identical within all tissues oftheir body. DNA fingerprinting was initiated by the use of restriction fragment length polymorphisms (RFLP). In 1987, Nakamura et aL2 found that a variable number of tandem repeats (VNTR) often occurred in the alleles. The probability of different individuals having the same number of tandem repeats in several different alleles is very low. Thus, the identification of VNTR from genomic DNA became a very reliable method for identification of individuals. Take the Huntington gene as an example, there are CAG trinucleotide repeats. For normal people, the number of CAG repeats is usually between 10 and 40. Since people have chromosomes in pairs, the possibility oftwo individuals having the same VNTR in the Huntington gene is less than one percent, ifwe assume equal distribution for various repeats. When several allels containing VNTR are analyzed for the number of repeats, the possibility of two individuals being exactly identical becomes very unlikely. Thus, DNA fingerprinting is a reliable tool for forensic analysis. In DNA fingerprinting, knowledge of the sequence of tandem repeats and restriction endornuclease sites can provide the basis for identification.

  19. CSI Frequency Domain Fingerprint-Based Passive Indoor Human Detection

    Chong Han

    2018-04-01

    Full Text Available Passive indoor personnel detection technology is now a hot topic. Existing methods have been greatly influenced by environmental changes, and there are problems with the accuracy and robustness of detection. Passive personnel detection based on Wi-Fi not only solves the above problems, but also has the advantages of being low cost and easy to implement, and can be better applied to elderly care and safety monitoring. In this paper, we propose a passive indoor personnel detection method based on Wi-Fi, which we call FDF-PIHD (Frequency Domain Fingerprint-based Passive Indoor Human Detection. Through this method, fine-grained physical layer Channel State Information (CSI can be extracted to generate feature fingerprints so as to help determine the state in the scene by matching online fingerprints with offline fingerprints. In order to improve accuracy, we combine the detection results of three receiving antennas to obtain the final test result. The experimental results show that the detection rates of our proposed scheme all reach above 90%, no matter whether the scene is human-free, stationary or a moving human presence. In addition, it can not only detect whether there is a target indoors, but also determine the current state of the target.

  20. PCR-DGGE fingerprints of microbial successional changes during ...

    PCR-DGGE fingerprints of microbial successional changes during fermentation of cereal-legume weaning foods. ... African Journal of Biotechnology ... Phenotypic identification and monitoring of the dynamics of naturally occurring microbial community responsible for the spontaneous fermentation of different cereal-legume ...