75 FR 9488 - Basel Comprehensive Quantitative Impact Study

Science.gov (United States)

2010-03-02

..., Luxembourg, Mexico, the Netherlands, Russia, Saudi Arabia, Singapore, South Africa, Spain, Sweden... measurement method for market risk. \\3\\ Basel Committee on Banking Supervision, Revisions to the Basel II...

Design and pitfalls of Basel's new liquidity rules

OpenAIRE

König, Philipp; Pothier, David

2016-01-01

Following the financial crisis of 2008/09, the Basel Committee on Banking Supervision introduced a new framework for banking regulation, commonly known as Basel III. For the first time since the inception of global banking regulation in 1988, Basel III contains explicit mandatory rules for liquidity regulation. The cornerstones of the new liquidity regulation are two balance sheet ratios that seek to reduce banks' liquidity transformation. While regulation addressing liquidity risk in the ban...

SME’s and Basel 2 Challenge

Directory of Open Access Journals (Sweden)

Mario G.R. Pagliacci

2006-05-01

Full Text Available The paper refers to the impact of the Basel 2 Agreement on the development of small and medium enterprises (SME. There are presented the methods for estimating the rating (standard, basic inter and advanced rating. It is also presented the experience of some countries like Italy, Germany, France and Japan related to the Basel 2 Agreement. Finally, the situation of small Italian enterprises is revised.

SME’s and Basel 2 Challenge

Directory of Open Access Journals (Sweden)

Mario G.R. Pagliacci

2006-03-01

Full Text Available The paper refers to the impact of the Basel 2 Agreement on the development of small and medium enterprises (SME. There are presented the methods for estimating the rating (standard, basic inter and advanced rating. It is also presented the experience of some countries like Italy, Germany, France and Japan related to the Basel 2 Agreement. Finally, the situation of small Italian enterprises is revised.

Chemical composition of Martian fines

Science.gov (United States)

Clark, B. C.; Baird, A. K.; Weldon, R. J.; Tsusaki, D. M.; Schnabel, L.; Candelaria, M. P.

1982-01-01

Of the 21 samples acquired for the Viking X-ray fluorescence spectrometer, 17 were analyzed to high precision. Compared to typical terrestrial continental soils and lunar mare fines, the Martian fines are lower in Al, higher in Fe, and much higher in S and Cl concentrations. Protected fines at the two lander sites are almost indistinguishable, but concentration of the element S is somewhat higher at Utopia. Duricrust fragments, successfully acquired only at the Chryse site, invariably contained about 50% higher S than fines. No elements correlate positively with S, except Cl and possibly Mg. A sympathetic variation is found among the triad Si, Al, Ca; positive correlation occurs between Ti and Fe. Sample variabilities are as great within a few meters as between lander locations (4500 km apart), implying the existence of a universal Martian regolith component of constant average composition. The nature of the source materials for the regolith fines must be mafic to ultramafic.

Assessing Banks’ Cost of Complying with Basel II

OpenAIRE

David VanHoose

2007-01-01

This policy brief assesses the implications of Basel II for bank regulatory compliance costs. In spite of widespread complaints by bankers about the costs of complying with Basel II rules, the academic literature has given surprisingly little attention to quantifying these costs. The brief discusses estimates of Basel II compliance costs based on commonly utilized rules of thumb and on survey data collected by the Office of the Comptroller of the Currency (OCC). In addition, it utilizes OCC b...

The l\\tlanufacture of Syntrletic L)rugs and Fine Chemicals+ -RE ...

Indian Academy of Sciences (India)

has been a phenomenal advance in the matter of drugs and fine chemicals, and that .... been demonstrated in the Haffkine Institute; it is in great demand and the ... position at the moment is obviously a difficult one, but some attempt must be ...

Outstanding Issues with the Basel II Accord

DEFF Research Database (Denmark)

Balling, Morten; Llewellyn, David T.

2001-01-01

A short oveview of issues related to the reform of capital adequacy regulation for financial institutions, which has been proposed by the Basel Committee for Banking Supervision.......A short oveview of issues related to the reform of capital adequacy regulation for financial institutions, which has been proposed by the Basel Committee for Banking Supervision....

Current exposure method for CCP’s under Basel III

Directory of Open Access Journals (Sweden)

Antonie Kotzé

2013-04-01

Full Text Available Exposure-at-default is one of the most interesting and most difficult parameters to estimate in counterparty credit risk. Basel I offered only the non-internal Current Exposure Method for estimating this quantity whilst Basel II further introduced the Standardized Method and an Internal Model Method. Under new Basel III rules a central counterparty is defined as being a financial institution. New principles set out by the Basel Committee on Banking Supervision forces Central Counterparties in using the Current Exposure Method when estimating the credit exposures to Clearing Member banks notwithstanding its shortcomings. The Current Exposure Method relies on the Value-at-Risk methodology and its characteristics are discussed in this note. We will particularly investigate exposures to SAFCOM, the South African clearing house and point to a mathematical discrepancy on how netting is effected through the Basel accord.

Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals

DEFF Research Database (Denmark)

Jullesson, David; David, Florian; Pfleger, Brian

2015-01-01

Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played...... chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes....... an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine...

Enhancing of chemical compound and drug name recognition using representative tag scheme and fine-grained tokenization.

Science.gov (United States)

Dai, Hong-Jie; Lai, Po-Ting; Chang, Yung-Chun; Tsai, Richard Tzong-Han

2015-01-01

The functions of chemical compounds and drugs that affect biological processes and their particular effect on the onset and treatment of diseases have attracted increasing interest with the advancement of research in the life sciences. To extract knowledge from the extensive literatures on such compounds and drugs, the organizers of BioCreative IV administered the CHEMical Compound and Drug Named Entity Recognition (CHEMDNER) task to establish a standard dataset for evaluating state-of-the-art chemical entity recognition methods. This study introduces the approach of our CHEMDNER system. Instead of emphasizing the development of novel feature sets for machine learning, this study investigates the effect of various tag schemes on the recognition of the names of chemicals and drugs by using conditional random fields. Experiments were conducted using combinations of different tokenization strategies and tag schemes to investigate the effects of tag set selection and tokenization method on the CHEMDNER task. This study presents the performance of CHEMDNER of three more representative tag schemes-IOBE, IOBES, and IOB12E-when applied to a widely utilized IOB tag set and combined with the coarse-/fine-grained tokenization methods. The experimental results thus reveal that the fine-grained tokenization strategy performance best in terms of precision, recall and F-scores when the IOBES tag set was utilized. The IOBES model with fine-grained tokenization yielded the best-F-scores in the six chemical entity categories other than the "Multiple" entity category. Nonetheless, no significant improvement was observed when a more representative tag schemes was used with the coarse or fine-grained tokenization rules. The best F-scores that were achieved using the developed system on the test dataset of the CHEMDNER task were 0.833 and 0.815 for the chemical documents indexing and the chemical entity mention recognition tasks, respectively. The results herein highlight the importance

THE FRAMEWORK RESULTING FROM THE BASEL III REGULATIONS

Directory of Open Access Journals (Sweden)

Motocu Marius

2013-07-01

The Basel III criteria entering into force between 2013 and 2018 constitute one of the major challenges to which the banking sector will face. The real impact of the Basel III reform will depend on the attitude of the banks that will have to change in their strategy, their cost structure and policy of remuneration of the shareholders. A reform which will have therefore an impact on the world economy ensuring as estimated by Governors and supervisors, stability and long term economic performance. This paper will present the main adjustments proposed by the Basel Committee.

What do Basel Capital Accords mean for SMEs?

OpenAIRE

Trujillo Ponce, Antonio; Briozzo, Anahí; Cardone Riportella, Clara

2011-01-01

This paper analyses the impact of the new Basel Capital Accords (Basel II and Basel III) on the bank’s capital requirements in a portfolio of Small and Medium-sized Enterprises (SMEs) when the internal ratings-based (IRB) approach is used. To do this, the study uses a large database of Spanish firms and covers the period from 2005 to 2009. We also examine the effect on the credit risk premium charged by banks of the guarantee offered by a Loan Guarantee Association (LGA) to a SME; and whether...

Mechanical and chemical compaction in fine-grained shallow-water limestones.

Science.gov (United States)

Shinn, E.A.; Robbin, D.M.

1983-01-01

Significant mechanical compaction resulted from pressures simulating less than 305 m of burial. Increasing loads to an equivalent of more than 3400 m did not significantly increase compaction or reduce sediment core length. Chemical compaction (pressure dissolution) was detected only in sediment cores compacted to pressures greater than 3400 m of burial. These short-term experiments suggest that chemical compaction would begin at much shallower depths given geologic time. Compaction experiments that caused chemical compaction lend support to the well-established hypothesis; that cement required to produce a low-porosity/low-permeability fine-grained limestone is derived internally. Dissolution, ion diffusion, and reprecipitation are considered the most likely processes for creating significant thicknesses of dense limestone in the geologic record. Continuation of chemical compaction after significant porosity reduction necessitates expulsion of connate fluids, possibly including hydrocarbons. -from Authors

Operational risk: A Basel II++ step before Basel III

OpenAIRE

Guegan , Dominique; Hassani , Bertrand

2011-01-01

URL des Documents de travail : http://ces.univ-paris1.fr/cesdp/cesdp2012.html An article based on this working paper is published in Journal of Risk Management in Financial Institutions, 2012/13, Volume 6, 37-53; Documents de travail du Centre d'Economie de la Sorbonne 2011.53 - ISSN : 1955-611X - Version originale Septembre 2011, révisée en Juillet 2012; Following Banking Committee on Banking Supervision, operational risk quantification is based on the Basel matrix which enables sorting inc...

Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals.

Science.gov (United States)

Jullesson, David; David, Florian; Pfleger, Brian; Nielsen, Jens

2015-11-15

Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes. Copyright © 2015 Elsevier Inc. All rights reserved.

Sustainability projects in Gundeldingen, Basel; Nachhaltigkeitsprojekte auf dem Gundeldingerfeld in Basel - Schlussbericht zum NaQu-Projekt

Energy Technology Data Exchange (ETDEWEB)

Binz, A.; Voyame, J.-P.; Mueller, W.

2008-10-15

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at the results obtained from the 'sustainable quarter' project in Basel, Switzerland. Along with other sustainability projects in Lausanne, Lucerne and Zurich, this project was part of a research project on sustainable city district development. The projects realised in the Gundeldingen quarter in Basel are discussed, such as the gradual conversion of an industrial site into a public meeting place, information offers on sustainability, mobility projects, new green spaces, solar energy, recycling, energy management and future sustainable development in this city district.

Potential Applications of Peroxidases in the Fine Chemical Industries

Science.gov (United States)

Casella, Luigi; Monzani, Enrico; Nicolis, Stefania

A description of selected types of reactions catalyzed by heme peroxidases is given. In particular, the discussion is focused mainly on those of potential interest for fine chemical synthesis. The division into subsections has been done fromthe point of view of the enzyme action, i.e., giving emphasis to themechanismof the enzymatic reaction, and from that of the substrate, i.e., analyzing the type of transformation promoted by the enzyme. These two approaches have several points in common.

Basel III and Asset Securitization

Directory of Open Access Journals (Sweden)

M. Mpundu

2013-01-01

Full Text Available Asset securitization via special purpose entities involves the process of transforming assets into securities that are issued to investors. These investors hold the rights to payments supported by the cash flows from an asset pool held by the said entity. In this paper, we discuss the mechanism by which low- and high-quality entities securitize low- and high-quality assets, respectively, into collateralized debt obligations. During the 2007–2009 financial crisis, asset securitization was seriously inhibited. In response to this, for instance, new Basel III capital and liquidity regulations were introduced. Here, we find that we can explicitly determine the transaction costs related to low-quality asset securitization. Also, in the case of dynamic and static multipliers, the effects of unexpected negative shocks such as rating downgrades on asset price and input, debt obligation price and output, and profit will be quantified. In this case, we note that Basel III has been designed to provide countercyclical capital buffers to negate procyclicality. Moreover, we will develop an illustrative example of low-quality asset securitization for subprime mortgages. Furthermore, numerical examples to illustrate the key results will be provided. In addition, connections between Basel III and asset securitization will be highlighted.

Basel III Liquidity Risk Measures and Bank Failure

Directory of Open Access Journals (Sweden)

L. N. P. Hlatshwayo

2013-01-01

Full Text Available Basel III banking regulation emphasizes the use of liquidity coverage and nett stable funding ratios as measures of liquidity risk. In this paper, we approximate these measures by using global liquidity data for 391 hand-selected, LIBOR-based, Basel II compliant banks in 36 countries for the period 2002 to 2012. In particular, we compare the risk sensitivity of the aforementioned Basel III liquidity risk measures to those of traditional measures such as the nonperforming assets ratio, return-on-assets, LIBOR-OISS, Basel II Tier 1 capital ratio, government securities ratio, and brokered deposits ratio. Furthermore, we use a discrete-time hazard model to study bank failure. In this regard, we find that Basel III risk measures have limited ability to predict bank failure when compared with their traditional counterparts. An important result is that a higher liquidity coverage ratio is associated with a higher bank failure rate. We also find that market-wide liquidity risk (proxied by LIBOR-OISS was the major predictor of bank failures in 2009 and 2010 while idiosyncratic liquidity risk (proxied by other liquidity risk measures was less. In particular, our contribution is the first to achieve these results on a global scale over a relatively long period for a variety of banks.

Computer Aided Methods & Tools for Separation & Purification of Fine Chemical & Pharmaceutical Products

DEFF Research Database (Denmark)

Afonso, Maria B.C.; Soni, Vipasha; Mitkowski, Piotr Tomasz

2006-01-01

An integrated approach that is particularly suitable for solving problems related to product-process design from the fine chemicals, agrochemicals, food and pharmaceutical industries is presented together with the corresponding methods and tools, which forms the basis for an integrated computer...

Basel III countercyclical capital rules: implications for South Africa

OpenAIRE

Gary Wayne van Vuuren

2012-01-01

The financial crisis has been blamed on many entities, institutions and individuals as well as the Basel II accord which had just begun to be implemented globally when the crisis erupted. The criticisms resulted in the construction of Basel III, a series of measures designed to augment and repair (but not replace) the Basel II accord. One of these adjuncts addresses the problem of economic procyclicality and suggests ways to mitigate it through capital charge increases when economies overheat...

Towards a New Basel Accord with More Rigorous Settlements

Directory of Open Access Journals (Sweden)

Petru PRUNEA

2010-09-01

Full Text Available The recent financial crisis made the banking sector more vulnerable to shocks. The system was characterised by weaknesses: too much leverage in the banking; not enough high quality capital to absorb losses and excessive credit growth based on underwriting standards and under pricing of liquidity. This article is about a new accord Basel III and the view of this framework. Basel III will be finalized before November 2010, and will be implemented by the end of 2012. Basel III is going to be implemented in the United States. All G–20 countries should adopt progressively this capital framework. The Basel Committee on Banking Supervision and national authorities should develop and agree a global framework for promoting a stronger liquidity in financial institutions. The reform program is to raise the resilience of the banking sector through promoting more sustainable growth, both in the near term and over the long therm. The initiatives of Basel Committee will develop a set of reforms based on four steps: public consultation, impact assessment, overall calibration and macroeconomic impact assessment over the transition period.

Impact of chemical leaching on permeability and cadmium removal from fine-grained soils.

Science.gov (United States)

Lin, Zhongbing; Zhang, Renduo; Huang, Shuang; Wang, Kang

2017-08-01

The aim of this study was to investigate the influence of chemical leaching on permeability and Cd removal from fine-grained polluted soils. Column leaching experiments were conducted using two types of soils (i.e., artificially Cd-polluted loam and historically polluted silty loam). Chemical agents of CaCl 2 , FeCl 3 , citric acid, EDTA, rhamnolipid, and deionized water were used to leach Cd from the soils. Results showed that organic agents reduced permeability of both soils, and FeCl 3 reduced permeability of loam soil, compared with inorganic agents and deionized water. Entrapment and deposition of colloids generated from the organic agents and FeCl 3 treatments reduced the soil permeability. The peak Cd effluence from the artificially polluted loam columns was retarded. For the artificially polluted soils treated with EDTA and the historically polluted soils with FeCl 3 , Cd precipitates were observed at the bottom after chemical leaching. When Cd was associated with large colloid particles, the reduction of soil permeability caused Cd accumulation in deeper soil. In addition, the slow process of disintegration of soil clay during chemical leaching might result in the retardation of peak Cd effluence. These results suggest the need for caution when using chemical-leaching agents for Cd removal in fine-grained soils.

Application showcases for a small scale membrane contactor for fine chemical processes

NARCIS (Netherlands)

Roelands, C.P.M.; Ngene, I.S.

2011-01-01

The transition from batch to continuous processing in fine-chemicals industries offers many advantages; among these are a high volumetric productivity, improved control over reaction conditions resulting in a higher yield and selectivity, a small footprint and a safer process due to a smaller

Dopad regulace Basel III na exportní financování

OpenAIRE

Malešová, Jana

2016-01-01

The thesis focuses on the impact of the banking regulation Basel III on bank-intermediated trade finance. The theoretical part of the thesis explains details of Basel III requirements, history of Basel Accords and their future in the form of Basel IV, characteristics of trade finance products and of the whole industry. Trade finance industry voiced worries about the negative effect that these new requirements might have on trade finance business. The thesis estimates determinants of bank-inte...

Basel II: panacea or a missed opportunity?

OpenAIRE

Maximilian J.B. Hall

2004-01-01

At end-June 2004, the Basel Committee on Banking Supervision finally issued the "New Capital Accord" ("Basel II"), following endorsement by G10 bank supervisors. The Accord replaces the original accord agreed in July 1988 and implemented by most major international banks since 1993. Publication followed years of exhausting work by the Committee to improve upon the original in the light of market developments, advances in risk management and revealed deficiencies in the operation of the curren...

Auswirkungen des Basel II Akkords auf österreichisches KMU

OpenAIRE

Heimer, Thomas; Köhler, Thomas

2004-01-01

The paper discusses the impact of the Basel II Accord on the financing of small and medium size enterprises (SME) in Austria. Although the Basel II Accord has not been established yet, the study tries to evaluate the expected impact of the Basel II Accord on SMEs, on the bases of the current financial data of SMEs. The empirical work used the NACE datapool for Austrian SME provided by KMU Forschung Austria. In the datapool, SMEs are defined as companies with a turnover of up to € 100 Mio. In ...

Implementation of Basel III capital standards and challenges of global economic crisis

Directory of Open Access Journals (Sweden)

Ljubić Marijana

2015-01-01

Full Text Available Implementation of the standards of the Basel Committee on Banking Supervision is an important step towards improving banking. The author seek to illuminate the importance and necessity of introducing new Basel III capital standards, Basel Committee on Banking Supervision in the banks in Serbia and around the world. Implementation of Basel standards, as a general model for managing capital and risk management in banks, based on quantitative model and a series of qualitative solutions, which will be based on the implementation of the proposed model, in oder to be effectively implemented in the Serbian banking sector that makes up only a part that is essential for improving the range of Banking Supervision in order to help better develop. The global economic crisis is encouraged and promoted by the Basel standards whose modification of birth to the new Basel III capital agreement, will reduce the impacts of the same. Banks that successfully implement Basel guidelines to improve their overall business will realize a significant business advantage over those in which the manner and extent of implementation of policies is aimed only at the mere satisfaction of the regulator. Will Basel standards fail to alleviate the impact of the global economic crisis? Did the Basel II standards and modifications hlp to enhance better and more advanced Basel III? These are just some of the questions that the author of the paper is providing answers for.

BASEL III AGREEMENT – BETWEEN NECESSITY AND CONVENIENCE

Directory of Open Access Journals (Sweden)

Florin Cornel Dumiter

2013-03-01

Full Text Available In the aftermath of the financial crises which started in 2007, the supervision and regulation authorities around the world dispatch the necessity of recalibration the financial and banking system. Because of the bailouts in the financial and banking sectors beyond the failure of hedge funds, mortgage bonds and the collapse of Lehman Brothers, specialists around the world looked at the necessity to underwrite the regulation and supervision frameworks. The Basel III Agreement, developed by the Basel Committee of Banking Supervision enriched a substantially revised program regarding the capital adequacy headlines. In this article, we provide an outlook regarding the necessity and conformity of the new Basel III agreement facing the challenges ahead and the upcoming threats of the ongoing financial crises.

Basel II - mis, milleks ja milliste mõjudega laenuvõtjatele?

Index Scriptorium Estoniae

2006-01-01

Ilmunud ka: Finansovõi Menedzhment : infovõpusk nr. 10 dets. lk. 6-7. Pankade kapitali adekvaatsuse uue raamistiku Basel II tulemuseks võiksid teoreetiliselt olla soodsamad intressid ja laenutingimused, suureneb turudistsipliini roll. Vt. samas: USA ei kiirusta Basel IIga; Mida muudab Basel II panga äriklientide jaoks? Küsimusele vastavad Sampo Panga finantsdirektor Ivar Pae ja SEB Ühispanga krediidi arenduse ja koolituse osakonna juhataja Jaanus Leemets; Kui palju omakapitali vajab pank laenukliendi krediidiriski katteks?

Basel III – Between Global Thinking and Local Acting

Directory of Open Access Journals (Sweden)

Vasile DEDU

2012-06-01

Full Text Available The financial crisis has demonstrated that self-regulation is not sufficient to markets and financial institutions with systemic importance.Permissive regulatory policies, allowing the development speed of global banking financial system, have played an important role in emphasizing the upward slope of the financial crisis.The new regulations known as Basel III framework aimed the strengthening of prudential capital and liquidity of financial institutions and create a stronger banking and financial system more resilient to shocks.Basel III is trying to eliminate the shortcomings of Basel II, by more extensive rules on integrated risk management in banking and financial environment.

Basel III implementation: Issues and challenges for Indian banks

Directory of Open Access Journals (Sweden)

M. Jayadev

2013-06-01

Full Text Available The Basel III framework, whose main thrust has been enhancing the banking sector's safety and stability, emphasises the need to improve the quality and quantity of capital components, leverage ratio, liquidity standards, and enhanced disclosures. This article first lays the context of Basel III and then incorporates the views of senior executives of Indian banks and risk management experts on addressing the challenges of implementing the Basel III framework, especially in areas such as augmentation of capital resources, growth versus financial stability, challenges for enhanced profitability, deposit pricing, cost of credit, maintenance of liquidity standards, and strengthening of risk architecture.

Basel III countercyclical capital rules: implications for South Africa

Directory of Open Access Journals (Sweden)

Gary Wayne van Vuuren

2012-08-01

Full Text Available The financial crisis has been blamed on many entities, institutions and individuals as well as the Basel II accord which had just begun to be implemented globally when the crisis erupted. The criticisms resulted in the construction of Basel III, a series of measures designed to augment and repair (but not replace the Basel II accord. One of these adjuncts addresses the problem of economic procyclicality and suggests ways to mitigate it through capital charge increases when economies overheat and capital charge reduction in economic contractions. The consequences of this proposed measure's introduction for South African banks is explored.

Bank liquidity-stress testing and Basel III implementation in Indonesia

Directory of Open Access Journals (Sweden)

Mohamad Adam

2016-03-01

Full Text Available This study analyzes the possibility of the implementation of the Basel III, namely the rules of banking sector. The population analyzed in this study comprises the 120 banks in Indonesia. The result shows that Indonesian banking sector has tremendous value if the Basel III standards is applied in Indonesia. Bank BCA has the lowest values with a score of 8.89 while Bank BRI has the highest value with a score of 9.68. This study concludes that the standard rules of Basel III would be able to be implemented in Indonesia.

Bank Liquidity-stress Testing and Basel III Implementation in Indonesia

OpenAIRE

Adam, Mohamad; Taufik, Taufik; Prathama, Muhammad Aditya Erfiyan

2015-01-01

This study analyzes the possibility of the implementation of the Basel III, namely the rules of banking sector. The population analyzed in this study comprises the 120 banks in Indonesia. The result shows that Indonesian banking sector has tremendous value if the Basel III standards is applied in Indonesia. Bank BCA has the lowest values with a score of 8.89 while Bank BRI has the highest value with a score of 9.68. This study concludes that the standard rules of Basel III would be able to be...

The Challenges of Basel III for Romanian Banking System

Directory of Open Access Journals (Sweden)

Anca Elena NUCU

2011-12-01

Full Text Available Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the impact of Basel III upon banking system in Romania is considered to be limited. The measures which credit institutions could take to mitigate the impact of alignment with the new standards are business model adjustment and balance sheet restructuring.

Likviditní riziko podle Basel III v EU

OpenAIRE

Mošnová, Alžběta

2014-01-01

In order to address the deficiencies in the banking regulation revealed by the recent financial crisis the Basel III introduces two minimum standards for funding liquidity, Liquidity Coverage Ratio (LCR) and Net Stable Funding Ratio (NSFR). The goal of this thesis is to analyze whether the NSFR is defined optimally or whether the Basel Committee on Banking Supervision (BCBS) will be forced to relax NSFR conditions similarly as happened by the LCR. Based on the approximation of the NSFR betwee...

Some Considerations Regarding the Implementation of Basel III

Directory of Open Access Journals (Sweden)

Mihai Dorel Vlad

2016-09-01

Full Text Available Basel III represents a basic revision of the banking industry regulatory and supervisory framework for the future, the objective being the stability consolidation of the financial system. The objective of this article is to analyze the impact of the Basel III implementation upon the banking system at the European level, and respectively, upon the banking system of Romania. Basel III standards have been elaborated as a response of the 2008 financial crisis and are considered as vital for the assurance of financial institution capitalization against future financial shocks. The new standards have as an object the improvement of risk management, increased requirements of transparency and publication of credit institutions, as well as solving the banks problems of systemical importance. The measures that the credit institutions could adopt in order to mitigate the impact of alignment to the new standards are adjusting the business model and restructuring bank balance sheets.

THE FEATURES OF THE RUSSIAN BANKING SUPERVISION AND REGULATION IN THE LIGHT OF BASEL II AND BASEL III IMPLEMENTATION IN THE RUSSIAN BANKING SYSTEM

Directory of Open Access Journals (Sweden)

K. R. Kakhrimanova

2014-01-01

Full Text Available The article focuses on the current situation in the Russian banking supervision and regulation and namely the process of its reforming in accordance withBaselprinciples. A special concern of the article is the features of Russian banking sector that are obstacles in full implementation of Basel II and Basel III inRussiatoday.

THE LIMITS OF BASEL II ACCORD

OpenAIRE

Zapodeanu Daniela; Gall Raluca Dorina

2009-01-01

Even though the actual Basel II Settlement has many advantages like: more transparent and detailed bank information, the rating systems, the internal models of evaluation for risks, the three pillars which represent a whole, an equitable bank competition,

THE LIMITS OF BASEL II ACCORD

Directory of Open Access Journals (Sweden)

Gall Raluca Dorina

2009-05-01

Full Text Available Even though the actual Basel II Settlement has many advantages like: more transparent and detailed bank information, the rating systems, the internal models of evaluation for risks, the three pillars which represent a whole, an equitable bank competition,

Implementace Basel III: Dopad na chování bankovního sektoru

OpenAIRE

Kreidl, Jan

2012-01-01

This thesis focuses on consequences of the full implementation of Basel III regulations and what impact it will have on the banking sector. The purpose of Basel III is to replace Basel II as a global regulatory standard, because of its predecessor's flaws, such as the amplifying of banks' procyclicality, overreliance on credit rating agencies or the incentive to securitize its assets. The examination of Basel III regulations has shown that the most difficult task for banks would be to raise t...

Basel III : how have banks adjusted to increase CET1 ratios?

OpenAIRE

Bjerketvedt, Oda; Arneberg-Bauer, Tonje

2013-01-01

In 2010 the Basel Committee finalised the global framework called Basel III, which will have a significant impact on the global banking sector. A large part of the framework focuses on capital adequacy, where the Common Equity Tier 1 (CET1) ratio is essential. Through an analysis of four banks from the United Kingdom – HSBC, Barclays, Lloyds Banking Group and Standard Chartered – this thesis aim to examine how these banks have adjusted to the new CET1 requirements. In the EU the Basel III ...

TÜRKİYE’DE BASEL I, II ve III KURALLARINA UYUM SÜRECİ

OpenAIRE

Ezgi ASLAN KÜLAHİ; Göksel TİRYAKİ; Ahmet YILMAZ

2013-01-01

TÜRKİYE’DE BASEL I, I VE III KURALLARINA UYUM SÜRECİÖzet: Bu çalışma, Basel Kriterleri çerçevesinde Türk Bankacılık Sektörü’nde yapılan çalışmaları değerlendirerek sektörün Basel Kriterleri’ne uyum sürecinde hangi aşamada olduğunu incelemek amacıyla yapılmıştır. Çalışmada; Türkiye’de Basel I ve II Kriterleri’ne geçiş süreci: Basel I ve II’ye yönelik yapılan hazırlık çalışmaları , Basel Kriterleri’ne uyum kapsamında Türk Bankacılık Mevzuatı’nda yapılan yasal düzenlemeler ve BDDK tarafından ger...

THE IMPACT OF THE BASEL III AGREEMENT ON THE BANKING SYSTEMS

Directory of Open Access Journals (Sweden)

Magdalena RADULESCU

2014-06-01

Full Text Available In the light of the current financial crisis, some deficiencies of the financial supervision system were highlighted. The former Basel II Agreement needed to be reformulated to achieve more stability of the banking systems. The new Basel III launched tight regulation regarding both banking solvency and liquidity and the leverage ratio. These regulations imply more costs for banks. Many bankers didn’t agree because of the decrease of the profitability of banks. Still, even the current crisis wasn’t surpassed yet, the financial authorities have already claimed another improved agreement Basel IV.

Basic Requirements Of The Basel Committee On Regulating Capital Adequacy And Liquidity Of Commercial Banks

OpenAIRE

Bahriddin Berdiyarov

2012-01-01

The current paper highlights theBaselI, Basel II & Basel III requirements on capital adequacy and liquidity of commercial banks.  In the paper, Basel II structure, methods of loan risk assessment, coefficients of loan risk assessment, credit risk measurement for counterparty banks are discussed.  Moreover, assessments of Basel III on bank chances against crisis driven from financial and economic crunches, risk management, performance quality and bank transparency improvement measures are ...

The Trafigura Case and the System of Prior Informed Consent Under the Basel Convention – A Broken System?

Directory of Open Access Journals (Sweden)

Gary Cox

2010-12-01

Full Text Available The much publicised Trafigura case of the illegal dumping of hazardous petrochemical waste in and around Abidjan in Côte d’Ivoire has reignited the debate about the international trade in hazardous wastes as well as issues of international corporate social responsibility. The incident, which took place in August 2006, highlights major flaws in the existing international regulatory system, particularly around the prior informed consent (PIC procedure. PIC forms the keystone of the 1989 Basel Convention on the Transboundary Movement of Hazardous Wastes. This article focuses on the effectiveness of the PIC procedures under the Basel Convention in the light of the response to the Trafigura incident. The incident exemplifies the failures of the PIC system under the Basel Convention. It reveals confusion on the part of regulatory authorities, failure to take prompt and appropriate action by the authorities involved, a lack of proactive supervisory intervention on the part of the Basel Secretariat, and a more far-reaching lack of developing country support for capacity building and technical assistance. There is a need for a more thorough-going approach to the assessment of environmentally sound management in developing countries. More fundamentally, meaningful consent encompasses the human rights dimension of hazardous wastes on local communities. Efforts aimed at increasing co-operation between the Basel, Rotterdam, Stockholm and MARPOL Conventions should be fully supported but they should be rapidly complemented by addressing deficiencies at ‘the sharp end’ around compliance and the effectiveness of the current system of PIC. A more integrated multilateral environmental regime dealing with all aspects of hazardous chemicals and wastes is warranted based on a wider focus on common concern for the global environment.

The Challenges of Basel III for Romanian Banking System

OpenAIRE

Anca Elena NUCU

2011-01-01

Basel III represents a fundamental review of the regulatory and supervision framework of the banking industry in the future, the aim being to strengthen the stability of the financial system. The purpose of this paper is to analyze the impact of Basel III introduction upon the banking system at European level, respectively, upon the Romanian banking system. If at European level it is estimated a substantial deficit in capital and liquidity, with major impact on profitability indicators, the i...

Analyses of fine paste ceramics

International Nuclear Information System (INIS)

Sabloff, J.A.

1980-01-01

Four chapters are included: history of Brookhaven fine paste ceramics project, chemical and mathematical procedures employed in Mayan fine paste ceramics project, and compositional and archaeological perspectives on the Mayan fine paste ceramics

Efficient process intensification of fine chemical production: a new classification tool for flow chemistry technologies

NARCIS (Netherlands)

Lexmond, A.S.; Roelands, C.P.M.; Graaff, M.P. de; Bassett, J.M.

2010-01-01

The fine chemicals and pharmaceuticals industry needs to innovate to beat international competition and resolve environmental issues. Process intensification by flow chemistry is the most promising route for this change, as it can reduce raw material and energy consumption, waste production, lead

Analyses of fine paste ceramics

Energy Technology Data Exchange (ETDEWEB)

Sabloff, J A [ed.

1980-01-01

Four chapters are included: history of Brookhaven fine paste ceramics project, chemical and mathematical procedures employed in Mayan fine paste ceramics project, and compositional and archaeological perspectives on the Mayan fine paste ceramics. (DLC)

PERSPECTIVES OF BASEL III: EMPIRICAL EVIDENCE FROM BOSNIA AND HERZEGOVINA

Directory of Open Access Journals (Sweden)

Emira Kozarević

2016-06-01

Full Text Available The latest Basel Accord, which relies on the New Capital Accord (i.e. Basel II and whose basic goals have been, from a normative standpoint, enhancing the banking sector’s ability to absorb the losses arising from economic distresses like the global financial crisis (2007-2009, improving risk management and governance, and strengthening the bank's transparency and disclosures, operationally emphasises the need to improve the quality and quantity of capital components, liquidity standards, and leverage ratio. The implementation of the Accord in developed economies started at the beginning of 2013 and the overall transition period from the Basel II framework should end by the year 2019. But as far as emerging economies are concerned, there are several issues on the road of implementation, such as necessary (technical skills and expertise of bank staff as well as their supervisory institutions, sophisticated internal rating mechanisms and capacity, significant amount of new information and recordkeeping, etc. This paper discusses real and potential effects of Basel III in both developed and emerging economies. A special emphasis is given to the banking sector of Bosnia and Herzegovina

Climate protection in the cantonal electricity supplier law Basel-Stadt; Klimaschutz in dem kantonalen Stromversorgergesetz Basel-Stadt

Energy Technology Data Exchange (ETDEWEB)

Volkwein, Stephan [Renewables-Now AG, Zuerich (Switzerland)

2017-11-15

Global warming is the world's most urgent environmental problem. Solar and wind energy in particular is required to replace fossil fuels for electricity, transport, heating and industry. The dense development of the cities means that there are many roofs and facades for the use of electricity. The actual use of solar energy production depends primarily on local and national legal framework conditions. The aim is to shed light on the extent to which the electricity supplier law of the half-canton of Basel-Stadt promotes climate protection. [German] Die Erderwaermung stellt das global draengendste Umweltproblem dar. Zum Ersatz der fossilen Energie bei Strom, Verkehr, Heizungen und Industrie sind insbesondere Solar- und Windenergie notwendig. Durch die dichte Bebauung der Staedte sind dort viele Dach- und Fassadenflaechen fuer die Stromenergienutzung vorhanden. Die tatsaechliche Nutzung fuer die Solarenergieproduktion haengt vor allem von lokalen und nationalen rechtlichen Rahmenbedingungen ab. Hier soll beleuchtet werden, inwieweit das Stromversorgerrecht des Halbkantons Basel-Stadt Klimaschutz befoerdert.

Chemical characteristics of fine particles emitted from different gas cooking methods

Science.gov (United States)

See, Siao Wei; Balasubramanian, Rajasekhar

Gas cooking is an important indoor source of fine particles (PM 2.5). The chemical characteristics of PM 2.5 emitted from different cooking methods, namely, steaming, boiling, stir-frying, pan-frying and deep-frying were investigated in a domestic kitchen. Controlled experiments were conducted to measure the mass concentration of PM 2.5 and its chemical constituents (elemental carbon (EC), organic carbon (OC), polycyclic aromatic hydrocarbons (PAHs), metals and ions) arising from these five cooking methods. To investigate the difference in particle properties of different cooking emissions, the amount and type of food, and the heat setting on the gas stove were kept constant during the entire course of the experiments. Results showed that deep-frying gave rise to the largest amount of PM 2.5 and most chemical components, followed by pan-frying, stir-frying, boiling, and steaming. Oil-based cooking methods released more organic pollutants (OC, PAHs, and organic ions) and metals, while water-based cooking methods accounted for more water-soluble (WS) ions. Their source profiles are also presented and discussed.

SYNBIOCHEM Synthetic Biology Research Centre, Manchester – A UK foundry for fine and speciality chemicals production

Directory of Open Access Journals (Sweden)

Le Feuvre RA

2016-12-01

Full Text Available The UK Synthetic Biology Research Centre, SYNBIOCHEM, hosted by the Manchester Institute of Biotechnology at the University of Manchester is delivering innovative technology platforms to facilitate the predictable engineering of microbial bio-factories for fine and speciality chemicals production. We provide an overview of our foundry activities that are being applied to grand challenge projects to deliver innovation in bio-based chemicals production for industrial biotechnology.

Standardy likvidity podle BASEL III a jejich dopad na vybrané banky ČR

OpenAIRE

Plíva, Rostislav

2014-01-01

Subject of this dissertation thesis is the readiness of selected Czech banks and one cooperative lending institution to implementation of BASEL III capital requirements. Analysis is concentrated to current state of BASEL II and BASEL III in field of liquidity. For a purpose of comparison the indicator of Liquidity Coverage Ratio required by BASEL III is calculated and, when necessary, theoretically modeled. Institutions are analyzed whether they are ready and what measures should be implement...

Choosing Expected Shortfall over VaR in Basel III Using Stochastic Dominance

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); J.A. Jiménez-Martín (Juan-Ángel); E. Maasoumi (Esfandiar); M.J. McAleer (Michael)

2015-01-01

textabstractBank risk managers follow the Basel Committee on Banking Supervision (BCBS) recommendations that recently proposed shifting the quantitative risk metrics system from Value-at-Risk (VaR) to Expected Shortfall (ES). The Basel Committee on Banking Supervision (2013, p. 3) noted that: “a

The Pro-Cyclical Impact of Basel III Regulatory Capital on Bank Capital Risk

OpenAIRE

Song, Guoxiang

2014-01-01

To raise the quality of regulatory capital, Basel III capital rules recognize unrealized gains and losses on all available-for-sale (AFS) securities in Common Equity Tier 1 Capital (CET1). However, by examining the correlations between U.S. GDP growth rate, interest rates and regulatory capital ratios computed using Basel III regulatory capital definition for six U.S. global systemically important banks (G-SIBs) since 2007, this chapter finds that Basel III regulatory capital will enhance the...

THE IMPACT OF BASEL III AGREEMENT ON THE ROMANIAN BANKING SYSTEM

Directory of Open Access Journals (Sweden)

Mihaela SUDACEVSCHI

2015-07-01

Full Text Available Basel III Agreement is a set of regulations on the banking system, which aims to ensure the system stability, by applying new standards on the capital level and on the liquidity level adequacy and also, on the reduction of banking risk, implied by the financial crisis. Romanian commercial banks will be forced, by the Basel III Agreement implementation, to reduce the risk of capital, using the balance sheet restructuring and by improving the capital quality. The aim of this paper is to analyze the impact of implementing new capital requirements, stipulated by Basel III Agreement, on the Romanian commercial banks, how they will react to the new standards and the decisions they will be able to adopt to respect the standards.

Chemical Composition of Fine Particulate Matter and Life Expectancy

Science.gov (United States)

Dominici, Francesca; Wang, Yun; Correia, Andrew W.; Ezzati, Majid; Pope, C. Arden; Dockery, Douglas W.

2016-01-01

Background In a previous study, we provided evidence that a decline in fine particulate matter (PM2.5) air pollution during the period between 2000 and 2007 was associated with increased life expectancy in 545 counties in the United States. In this article, we investigated which chemical constituents of PM2.5 were the main drivers of the observed association. Methods We estimated associations between temporal changes in seven major components of PM2.5 (ammonium, sulfate, nitrate, elemental carbon matter, organic carbon matter, sodium, and silicon) and temporal changes in life expectancy in 95 counties between 2002 and 2007. We included US counties that had adequate chemical components of PM2.5 mass data across all seasons. We fitted single pollutant and multiple pollutant linear models, controlling for available socioeconomic, demographic, and smoking variables and stratifying by urban and nonurban counties. Results In multiple pollutant models, we found that: (1) a reduction in sulfate was associated with an increase in life expectancy; and (2) reductions in ammonium and sodium ion were associated with increases in life expectancy in nonurban counties only. Conclusions Our findings suggest that recent reductions in long-term exposure to sulfate, ammonium, and sodium ion between 2002 and 2007 are associated with improved public health. PMID:25906366

Does Basel II affect the market valuation of discretionary loan loss provisions?

NARCIS (Netherlands)

Hamadi, Malika; Heinen, Andreas; Linder, Stefan; Porumb, Vlad-Andrei

2016-01-01

We use a sample of banks from 24 European countries to investigate whether the adoption of the Basel II Capital Accord in 2008 affects the market valuation of discretionary loan loss provisions (DLLPs). Although Basel II lowers the incentives of internal ratings-based (IRB) banks to recognize income

Global chemical composition of ambient fine particulate matter for exposure assessment.

Science.gov (United States)

Philip, Sajeev; Martin, Randall V; van Donkelaar, Aaron; Lo, Jason Wai-Ho; Wang, Yuxuan; Chen, Dan; Zhang, Lin; Kasibhatla, Prasad S; Wang, Siwen; Zhang, Qiang; Lu, Zifeng; Streets, David G; Bittman, Shabtai; Macdonald, Douglas J

2014-11-18

Epidemiologic and health impact studies are inhibited by the paucity of global, long-term measurements of the chemical composition of fine particulate matter. We inferred PM2.5 chemical composition at 0.1° × 0.1° spatial resolution for 2004-2008 by combining aerosol optical depth retrieved from the MODIS and MISR satellite instruments, with coincident profile and composition information from the GEOS-Chem global chemical transport model. Evaluation of the satellite-model PM2.5 composition data set with North American in situ measurements indicated significant spatial agreement for secondary inorganic aerosol, particulate organic mass, black carbon, mineral dust, and sea salt. We found that global population-weighted PM2.5 concentrations were dominated by particulate organic mass (11.9 ± 7.3 μg/m(3)), secondary inorganic aerosol (11.1 ± 5.0 μg/m(3)), and mineral dust (11.1 ± 7.9 μg/m(3)). Secondary inorganic PM2.5 concentrations exceeded 30 μg/m(3) over East China. Sensitivity simulations suggested that population-weighted ambient PM2.5 from biofuel burning (11 μg/m(3)) could be almost as large as from fossil fuel combustion sources (17 μg/m(3)). These estimates offer information about global population exposure to the chemical components and sources of PM2.5.

The influence of the new Basel regulation rules on the Slovak banking sector

OpenAIRE

Emília Zimková; Jana Tašková

2012-01-01

The aim of the paper is to quantify an impact of the new Basel regulation rules which are known as Basel III on the Slovak banking sector. We present methodology provided by the Bank for international settlement in its monitoring workbook and as to database the set of central bank statements and reports provided upon request have been used. Based on our calculations we discovered three main impacts of the Basel III on the Slovak banking sector: i) the volume and quality of the capital meet re...

The Countercyclical Capital Buffer of Basel III: A Critical Assessment

OpenAIRE

Repullo, Rafael; Saurina, Jesús

2011-01-01

We provide a critical assessment of the countercyclical capital buffer in the new regulatory framework known as Basel III, which is based on the deviation of the creditto- GDP ratio with respect to its trend. We argue that a mechanical application of the buffer would tend to reduce capital requirements when GDP growth is high and increase them when GDP growth is low, so it may end up exacerbating the inherent pro-cyclicality of risk-sensitive bank capital regulation. We also note that Basel I...

Basel III - et fæstningsværk i bankreguleringens Maginot-linje?

DEFF Research Database (Denmark)

Grosen, Anders

2010-01-01

Den nye bankregulering med skærpede kapital- og likviditetskrav til bankerne er netop blevet godkendt på G20-landenes topmøde i Seoul. Reglerne er udarbejdet af den internationale bankkomite med hovedsæde i Basel - deraf betegnelsen Basel III. Nummereringen fortæller, at det er bankkomiteens tred...

2001-2010 Basel II kriterleri ve Türk bankacılık sistemine etkileri

OpenAIRE

Gökçen, Belgin

2012-01-01

Uluslararası piyasalarda son 20 yıl içerisinde meydana gelen krizler bankacılık sektöründe uluslararası farklılıklara yol açmış ve bunların giderilmesi amacıyla Uluslararası Ödemeler Bankası (BIS-Bank for International Settlements) bünyesinde Basel komitesi kurulmuştur. Basel Komitesi ilk olarak 1988 yılında bankacılık uygulamalarında standartlaşmayı getirmek amacıyla Basel Sermaye Uzlaşısı'nı (Basel I) yayımlamıştır. 1988 sonrası dönemde dünya finans sisteminin karşılaştığı krizler ve Basel ...

Seasonal trends, chemical speciation and source apportionment of fine PM in Tehran

Science.gov (United States)

Arhami, Mohammad; Hosseini, Vahid; Zare Shahne, Maryam; Bigdeli, Mostafa; Lai, Alexandra; Schauer, James J.

2017-03-01

Frequent air pollution episodes have been reported for Tehran, Iran, mainly because of critically high levels of fine particulate matter (PM2.5). The composition and sources of these particles are poorly known, so this study aims to identify the major components and heavy metals in PM2.5 along with their seasonal trends and associated sources. 24-hour PM2.5 samples were collected at a main residential station every 6 days for a full year from February 2014 to February 2015. The samples were analyzed for ions, organic carbon (including water-soluble and insoluble portions), elemental carbon (EC), and all detectable elements. The dominant mass components, which were determined by means of chemical mass closure, were organic matter (35%), dust (25%), non-sea salt sulfate (11%), EC (9%), ammonium (5%), and nitrate (2%). Organic matter and EC together comprised 44% of fine PM on average (increased to >70% in the colder season), which reflects the significance of anthropogenic urban sources (i.e. vehicles). The contributions of different components varied considerably throughout the year, particularly the dust component that varied from 7% in the cold season to 56% in the hot and dry season. Principal component analyses were applied, resulting in 5 major source factors that explained 85% of the variance in fine PM. Factor 1, representing soil dust, explained 53%; Factor 2 denotes heavy metals mainly found in industrial sources and accounted for 18%; and rest of factors, mainly representing combustion sources, explained 14% of the variation. The levels of major heavy metals were further evaluated, and their trends showed considerable increases during cold seasons. The results of this study provide useful insight to fine PM in Tehran, which could help in identifying their health effects and sources, and also adopting effective control strategies.

The impact of Basel III on money creation: A synthetic analysis

OpenAIRE

Xiong, Wanting; Wang, Yougui

2017-01-01

Recent evidences provoke broad rethinking of the role of banks in money creation. The authors argue that apart from the reserve requirement, prudential regulations also play important roles in constraining the money supply. Specifically, they study three Basel III regulations and theoretically analyze their standalone and collective impacts. The authors find that 1) the money multiplier under Basel III is not constant but a decreasing function of the monetary base; 2) the determinants of the ...

Health effects of fine particulate matter in life cycle impact assessment: findings from the Basel Guidance Workshop

DEFF Research Database (Denmark)

Fantke, Peter; Jolliet, Olivier; Evans, John S.

2015-01-01

Purpose Fine particulate matter (PM2.5) is considered to be one of the most important environmental factors contributing to the global human disease burden. However, due to the lack of broad consensus and harmonization in the life cycle assessment (LCA) community, there is no clear guidance on ho...

TÜRKİYE’DE BASEL I, II ve III KURALLARINA UYUM SÜRECİ

Directory of Open Access Journals (Sweden)

Ezgi ASLAN KÜLAHİ

2013-07-01

Full Text Available Bu çalışma, Basel Kriterleri çerçevesinde Türk Bankacılık Sektörü’nde yapılan çalışmaları değerlendirerek sektörün Basel Kriterleri’ne uyum sürecinde hangi aşamada olduğunu incelemek amacıyla yapılmıştır. Çalışmada; Türkiye’de Basel I ve II Kriterleri’ne geçiş süreci: Basel I ve II’ye yönelik yapılan hazırlık çalışmaları , Basel Kriterleri’ne uyum kapsamında Türk Bankacılık Mevzuatı’nda yapılan yasal düzenlemeler ve BDDK tarafından gerçekleştirilen yerel sayısal etki çalışmaları incelenmiş, sektörün Basel II Kriterleri’ne uyum kabiliyeti değerlendirilmiştir. Ayrıca, çalışmada henüz nihaî şekli verilmeyen Basel III Kriterleri’nin Türk Bankacılık Sektörü’ne muhtemel etkileri ele alınmıştır. Türkiye bankacılık kesimi Haziran 2012 itibariyle Basel II kurallarını sorunsuz bir şekilde uygulamayı başarmıştır. Halihazırda dünya genelinde nihai şekli verilmeye çalışılan ve bazı yönlerden ciddi eleştirilere maruz kalan Basel III kurallarına uyum konusunda da Türkiye Bankacılık Kesiminin mevcut verilerin analizinden hareketle bir sıkıntısı olmayacağı anlaşılmaktadır. Diğer taraftan; Türkiye’nin uluslararası kurallara intibak konusunda finansal kesimde göstermiş olduğu söz konusu uyum kabiliyetinin, genel olarak sürdürülebilir büyüme, ekonomik kalkınma ve ülkenin yapısal dönüşümü açısından daha olumlu sonuçlar vermesi, Türkiye ekonomisinin diğer yapısal sorunları ve başlıca makro ekonomik istikrarsızlıklarının çözümüne bağlı olduğu değerlendirilmektedir.

Financial Sector Assessment Program : Nigeria - Basel Core Principles for Effective Banking Supervision

OpenAIRE

International Monetary Fund; World Bank

2013-01-01

The assessment of the current state of the implementation of the Basel Core Principles (BCP) for effective banking supervision in Nigeria, against the BCP methodology issued by the Basel Committee on Banking Supervision (BCBS) in October 2006, was completed between August 27 and September 19, 2012, as part of a Financial Sector Assessment Program (FSAP) update, undertaken jointly by the Fu...

THE IMPACT OF THE BASEL III AGREEMENT ON THE BANKING SYSTEMS

OpenAIRE

Magdalena RADULESCU

2014-01-01

In the light of the current financial crisis, some deficiencies of the financial supervision system were highlighted. The former Basel II Agreement needed to be reformulated to achieve more stability of the banking systems. The new Basel III launched tight regulation regarding both banking solvency and liquidity and the leverage ratio. These regulations imply more costs for banks. Many bankers didn’t agree because of the decrease of the profitability of banks. Still, even the current crisis w...

Dopad likviditních pravidel Basel III na banky v EU

OpenAIRE

Klímová, Dana

2016-01-01

New liquidity rules introduced under the Basel III framework define the Net Stable Funding Ratio (NSFR) that requires banks to possess an adequate long-term liquidity. The NSFR will enter into force on January 1, 2018 and banks are concerned that this regulation will lower their profitability. In this thesis the Basel III liquidity rules are analysed. The research seeks to define characteristics and triggers of the NSFR, using a sample of 500 EU banks. We find that smaller banks (by asset siz...

Measurement and modelling of liquidity risk under the Basel III rules

OpenAIRE

Turkuner, Ercan

2016-01-01

In compliance with Basel III rules this study aims to create a model capable of generating a balance sheet. In the light of several hypotheses and general data about Turkish Banking System the model generates a balance sheet and, hence Basel III liquidity ratios could be set their threshold values. Besides, with the sensitivity analysis possible impacts of balance sheet structure on the Liquidity Coverage Ratio which promotes the short-term resilience of the liquidity risk profiles of banks h...

Developing “best practices” for bankers’ pay in line with Basel III

Directory of Open Access Journals (Sweden)

Peiyi Yu

2011-09-01

Full Text Available This paper proposes hybrid capital securities as a significant part of senior bank executive incentive compensation in light of Basel III, a new global regulatory standard on bank capital adequacy and liquidity agreed by the members of the Basel Committee on Banking Supervision. The committee developed Basel III in a response to the deficiencies in financial regulation brought about by the global financial crisis. Basel III strengthens bank capital requirements and introduces new regulatory requirements on bank liquidity and bank leverage. The hybrid bank capital securities we propose for bank executives’ compensation are preferred shares and subordinated debt that the June 2004 Basel II regulatory framework recognised as other admissible forms of capital. The past two decades have witnessed dramatic increase in performance-related pay in the banking industry. Stakeholders such as shareholders, debtholders and regulators criticise traditional cash and equity-based compensation for encouraging bank executives’ excessive risk taking and short-termism, which has resulted in the failure of risk management in high profile banks during the global financial crisis. Paying compensation in the form of hybrid bank capital securities may align the interests of executives with those of stakeholders and help banks regain their reputation for prudence after years of aggressive risk-taking. Additionally, banks are desperately seeking to raise capital in order to bolster balance sheets damaged by the ongoing credit crisis. Tapping their own senior employees with large incentive compensation packages may be a viable additional source of capital that is politically acceptable in times of large-scale bailouts of the financial sector and economically wise as it aligns the interests of the executives with the need for a stable financial system.

Chromium Extraction via Chemical Processing of Fe-Cr Alloys Fine Powder with High Carbon Content

Science.gov (United States)

Torres, D. M.; Navarro, R. C. S.; Souza, R. F. M.; Brocchi, E. A.

2017-06-01

Ferrous alloys are important raw materials for special steel production. In this context, alloys from the Fe-Cr system, with typical Cr weight fraction ranging from 0.45 to 0.95, are prominent, particularly for the stainless steel industry. During the process in which these alloys are obtained, there is considerable production of fine powder, which could be reused after suitable chemical treatment, for example, through coupling pyrometallurgical and hydrometallurgical processes. In the present study, the extraction of chromium from fine powder generated during the production of a Fe-Cr alloy with high C content was investigated. Roasting reactions were performed at 1073 K, 1173 K, and 1273 K (800 °C, 900 °C, and 1000 °C) with 300 pct (w/w) excess NaOH in an oxidizing atmosphere (air), followed by solubilization in deionized water, selective precipitation, and subsequent calcination at 1173 K (900 °C) in order to convert the obtained chromium hydroxide to Cr2O3. The maximum achieved Cr recovery was around 86 pct, suggesting that the proposed chemical route was satisfactory regarding the extraction of the chromium initially present. Moreover, after X-ray diffraction analysis, the final produced oxide has proven to be pure Cr2O3 with a mean crystallite size of 200 nm.

77 FR 52791 - Regulatory Capital Rules: Regulatory Capital, Implementation of Basel III, Minimum Regulatory...

Science.gov (United States)

2012-08-30

... the Basel Committee on Banking Supervision (BCBS) in ``Basel III: A Global Regulatory Framework for... seeking comment on the two related NPRs published elsewhere in today's Federal Register. The two related... them on Regulations.gov without change, including any business or personal information that you provide...

BASEL III – IMPLICATIONS OF THE NEW AGREEMENT UPON THE BANKING SYSTEMS

OpenAIRE

VLADA RAMONA IOANA; BANU IOANA MADALINA

2013-01-01

Global banking crisis generated by the subprime crisis in the U.S., received in December 2010, as a response from the Committee on Banking Supervision of the Bank for International Settlements, new capital adequacy rules for banks under the Basel III title: International framework for measurement, standardization and monitoring of liquidity risk, and Basel III: A global regulatory framework for banks and a sounder banking system with new capital adequacy rules for banks. These regulations are...

Phasing-in Basel III capital and liquidity requirements in post-revolution Egypt

Directory of Open Access Journals (Sweden)

Monal Abdel-Baki

2012-08-01

Full Text Available The Basel Committee has introduced a new set of capital and liquidity requirements to be introduced by the global banking system during 2013 till January 2019. Egypt possesses a well-capitalised banking sector, yet it has been exposed to the devastating shock imposed by its popular revolution. Using the GMM method, the impact of introducing the new capital and liquidity requirements on the macroeconomic performance of the Egyptian economy is examined. The results reveal that Egyptian banks are motivated to enhance capital and liquidity ratios in the case of realizing high profits and favourable conditions at the individual banking level. On the other hand, negative macroeconomic performance and a poor business environment substantially deter the preparedness of Egyptian banks to meet the Basel III requirements. The analysis is timely given the need for compliance with Basel III as one of the requirements to raise the credit rating of the devastated economy.

The Operational Risk in the Outlook of the Basel II Accord Implementation

Directory of Open Access Journals (Sweden)

Andrei Tinca

2007-05-01

Full Text Available The financial scandals în the last two decades have determined the Basel Committee to improve the risk controls for banks în general, and for operational risk in particular. Operational risk covers all non-market or credit risk, therefore including management risk, IT and fraud risk. By the Basel II Accord, the Committee proposes three risk measurement methods, which induce increasing costs, but also greater reductions în a bank’s capital reserve, and thus în its operating costs.

THE IMPACT OF BASEL III ADOPTION BY G20 MEMBERS ON THEIR CREDIT RATINGS

Directory of Open Access Journals (Sweden)

Mohammed Kalloub

2018-03-01

Full Text Available This study aims to analyze the effect of Basel III standards adoption made by 27 countries included in Basel III adoption reports (including G20 group members on their credit rating. In addition, the study tests the impact of some macroeconomic variables on sovereign credit rating. The data are obtained from BCBS semi-annual adoption reports, along with other macroeconomic indicators published by IMF and World Bank; however, the basic indicator for credit rating is Standard &Poor’s credit rating. The period under the study is between 2011 and 2016. The results of the analysis show that there is a strong statistical significant positive effect of Basel III standards on 27 countries’ credit rating.

THE NEW BASEL III REGULATIONS ON LIQUIDITY AND ITS POSSIBLE EFFECTS

Directory of Open Access Journals (Sweden)

APĂTĂCHIOAE Adina

2013-12-01

Full Text Available The global financial crisis determined a series of proposals to reform the regulatory framework that govern the banking sector in order to strengthen its resilience in poor circumstances. For this purpose, the provisions of Basel III regulatory package is reflected on the issues and risks that have caused the financial crisis, including those related to liquidity. The aim of this article is to present the new Basel III on liquidity rules, their implementation need to ensure financial stability and their possible effects. The objectives of Basel III in terms of liquidity are formulated to determine the increase in liquid assets and the reduction of the short-term funding. However, all measures taken through the new regulations can reduce the risks, but can not exclude the emergence of vulnerabilities affecting the banking system in the future. We believe that the new regulations have caused a series of reforms to the banking system, but the compliance degree of their implementation and the effects of new laws differs depending on the degree of development of each country, the main implications are differentiated by monetary transmission channels.

Critical Evaluation of Basel III as Prudential Regulation and its Consequences in Developing Countries’ Credit Needs

OpenAIRE

Dawa Sherpa

2013-01-01

This paper seeks to critically evaluate the nature and motivation for the regulatory frame sought in the Basel III norms and its consequences on the credit needs of developing countries. After the failure of previous two Basel accords (I and II), to act as the effective prudential regulation of large financial institutions operating on global scale, the new Basel III accord is hailed as the new regulatory rule which has successfully taken into consideration of all the lacunas of earlier accor...

The Impact of Basel III Indexes of Leverage and Liquidity CRDIV/CRR on Bank Performance: Evidence from Greek Banks

OpenAIRE

Maria, Psillaki; Eleftheria, Georgoulea

2016-01-01

The recent global financial crisis (GFC) of 2007-2008 revealed several critical shortcomings in the existing Basel II international banking supervisory framework. The Basel Committee adopted a set of reform measures inclusive of additional solvency and liquidity rules, known as "Basel III". Through a new Directive and Regulation known as the CRD IV and CRR package, the European Union implemented Basel III in January 2014. We investigate the effects of the new liquidity and leve...

BASEL III – IMPLICATIONS OF THE NEW AGREEMENT UPON THE BANKING SYSTEMS

Directory of Open Access Journals (Sweden)

VLADA RAMONA IOANA

2013-12-01

Full Text Available Global banking crisis generated by the subprime crisis in the U.S., received in December 2010, as a response from the Committee on Banking Supervision of the Bank for International Settlements, new capital adequacy rules for banks under the Basel III title: International framework for measurement, standardization and monitoring of liquidity risk, and Basel III: A global regulatory framework for banks and a sounder banking system with new capital adequacy rules for banks. These regulations are the focus of global financial reform to prevent future occurrence of banking crises.

Can Basel III Prevent Future Financial Crisis?

OpenAIRE

Madzova, Violeta

2012-01-01

The financial sector is crucial for the smooth functioning of the economy. For this reason, the authorities use financial regulation as a means to ensure the stability of the banking system and to correct those ‘market failures’ that would otherwise threaten the solidity of financial institutions. Recently introduced Basel III on the new bank capital and liquidity standards, (that is going to be implemented gradually starting from 2013 till 2019) is changing the way that banks address the...

Fine Motor Function Skills in Patients with Parkinson Disease with and without Mild Cognitive Impairment.

Science.gov (United States)

Dahdal, Philippe; Meyer, Antonia; Chaturvedi, Menorca; Nowak, Karolina; Roesch, Anne D; Fuhr, Peter; Gschwandtner, Ute

2016-01-01

The objective of this study was to investigate the relation between impaired fine motor skills in Parkinson disease (PD) patients and their cognitive status, and to determine whether fine motor skills are more impaired in PD patients with mild cognitive impairment (MCI) than in non-MCI patients. Twenty PD MCI and 31 PD non-MCI patients (mean age 66.7 years, range 50-84, 36 males/15 females), all right-handed, took part in a motor performance test battery. Steadiness, precision, dexterity, velocity of arm-hand movements, and velocity of wrist-finger movements were measured and compared across groups and analyzed for confounders (age, sex, education, severity of motor symptoms, and disease duration). Statistical analysis included t tests corrected for multiple testing, and a linear regression with stepwise elimination procedure was used to select significant predictors for fine motor function. PD MCI patients performed significantly worse in precision (p motor function skills were confounded by age. Fine motor skills in PD MCI patients are impaired compared to PD non-MCI patients. Investigating the relation between the fine motor performance and MCI in PD might be a relevant subject for future research. © 2016 S. Karger AG, Basel.

The influence of the new Basel regulation rules on the Slovak banking sector

Directory of Open Access Journals (Sweden)

Emília Zimková

2012-01-01

Full Text Available The aim of the paper is to quantify an impact of the new Basel regulation rules which are known as Basel III on the Slovak banking sector. We present methodology provided by the Bank for international settlement in its monitoring workbook and as to database the set of central bank statements and reports provided upon request have been used. Based on our calculations we discovered three main impacts of the Basel III on the Slovak banking sector: i the volume and quality of the capital meet requirements of the new Basel regulation already. There are no hybrid instruments in Tier 1 Capital. Movements in volumes of expected risk-weighted assets in the Slovak banking sector won´t be relevant particularly due to absence of toxic assets associated with financial markets; ii calculated indicator of leverage is more than two times higher as the requested one; iii the liquidity coverage ratio and the net stable funding ratio are even today in the Slovak banking sector highly above standards and they do not require any transitional period. The direction of the development of the world banking is returning to the classical trading model and the parameters are set for this. The Slovak banking sector did not manage to leave this classical model and this will help it now and also in the future.

Use of the International Pharmaceutical Federation's Basel Statements to Assess and Advance Hospital Pharmacy Practice: A Scoping Review.

Science.gov (United States)

Penm, Jonathan; Chaar, Betty; Moles, Rebekah J

2016-01-01

The Basel statements of the International Pharmaceutical Federation, which provide the first global, unified vision for the hospital pharmacy profession, have recently been revised. Originally released in 2008, the Basel statements have since been made available in 21 languages, and thus have the potential for great impact around the world. To conduct a scoping review to examine the extent and nature of research activity related to the Basel statements. Google Scholar, PubMed, and International Pharmaceutical Abstracts were searched using the key term "Basel statements" for relevant research articles. From each included study, data were extracted on geographic location, study design, study outcomes, and use of the Basel statements. The search strategy generated 113 results. Further refinement resulted in 14 English-language articles that met the inclusion criteria. Four of these articles focused on adapting the Basel statements to European practice, an initiative of the European Association of Hospital Pharmacists that led to development of the European statements of Hospital Pharmacy. Six studies focused on monitoring hospital pharmacy practice in Uganda, the Pacific island countries, and the Western Pacific Region. These studies provide valuable baseline data to measure and track the development of hospital pharmacy practices in their respective countries and regions. The remaining 4 studies used qualitative methods to explore the barriers to and facilitators of implementation of the Basel statements in South Africa, China, and Australia. The Basel statements have led to multiple initiatives around the world, involving more than 70 countries. The European and Western Pacific regions have been the most active. Current initiatives should be continued to ensure identification and resolution of issues related to sustaining their use over time.

An Academic Response to Basel 3.5

Directory of Open Access Journals (Sweden)

Paul Embrechts

2014-02-01

Full Text Available Recent crises in the financial industry have shown weaknesses in the modeling of Risk-Weighted Assets (RWAs. Relatively minor model changes may lead to substantial changes in the RWA numbers. Similar problems are encountered in the Value-at-Risk (VaR-aggregation of risks. In this article, we highlight some of the underlying issues, both methodologically, as well as through examples. In particular, we frame this discussion in the context of two recent regulatory documents we refer to as Basel 3.5.

The future of international banking regulations in response to the financial crisis of 2007/2009: After Basel iii then what next?

Directory of Open Access Journals (Sweden)

Joseph E. Isebor

2014-06-01

Full Text Available The financial crisis 2007-2009 will not be forgotten in a hurry because of its impact on the global financial system almost replicating the Great Depression. Major and causal factors contributed to the financial crisis, and this prompted the establishment of Basel III to contain the crisis. Basel III introduced improved capital and liquidity rules, but still could not contain the crisis. This leaves regulators with questions of how to prevent another financial crisis in the future. Evidences suggest that the financial market is evolving because of its complex and changing nature, and so are the international banking regulations (Basel I, Basel II and Basel III that support the system in terms of maintaining economic and financial stability. It is clear that Basel III will not stop the next financial crisis even though the Basel accords continue to evolve in response to maintaining economic and financial stability, with the core purpose of preventing another financial crisis. Uncertainties lies ahead, and regulators cannot be sure of what will likely cause the next crisis, but indications suggest that the financial markets and international banking regulations in the form of Basel accords will continue to evolve

Friedrich Nietzsche in Basel: An Apology for Classical Studies

Science.gov (United States)

Santini, Carlotta

2018-01-01

Alongside his work as a professor of Greek Language and Literature at the University of Basel, Friedrich Nietzsche reflected on the value of classical studies in contemporary nineteenth-century society, starting with a self-analysis of his own classical training and position as a philologist and teacher. Contrary to his well-known aversion to…

Size distribution of chemical elements and their source apportionment in ambient coarse, fine, and ultrafine particles in Shanghai urban summer atmosphere.

Science.gov (United States)

Lü, Senlin; Zhang, Rui; Yao, Zhenkun; Yi, Fei; Ren, Jingjing; Wu, Minghong; Feng, Man; Wang, Qingyue

2012-01-01

Ambient coarse particles (diameter 1.8-10 microm), fine particles (diameter 0.1-1.8 microm), and ultrafine particles (diameter Source apportionment of the chemical elements was analyzed by means of an enrichment factor method. Our results showed that the average mass concentrations of coarse particles, fine particles and ultrafine particles in the summer air were 9.38 +/- 2.18, 8.82 +/- 3.52, and 2.02 +/- 0.41 microg/m3, respectively. The mass percentage of the fine particles accounted for 51.47% in the total mass of PM10, indicating that fine particles are the major component in the Shanghai ambient particles. SEM/EDX results showed that the coarse particles were dominated by minerals, fine particles by soot aggregates and fly ashes, and ultrafine particles by soot particles and unidentified particles. SRXRF results demonstrated that crustal elements were mainly distributed in the coarse particles, while heavy metals were in higher proportions in the fine particles. Source apportionment revealed that Si, K, Ca, Fe, Mn, Rb, and Sr were from crustal sources, and S, Cl, Cu, Zn, As, Se, Br, and Pb from anthropogenic sources. Levels of P, V, Cr, and Ni in particles might be contributed from multi-sources, and need further investigation.

Organocatalysts for enantioselective synthesis of fine chemicals: definitions, trends and developments

Directory of Open Access Journals (Sweden)

Chiara Palumbo

2015-02-01

Full Text Available Organocatalysis, that is the use of small organic molecules to catalyze organic transformations, has been included among the most successful concepts in asymmetric catalysis, and it has been used for the enantioselective construction of C–C, C–N, C–O, C–S, C–P and C–halide bonds. Since the seminal works in early 2000, the scientific community has been paying an ever-growing attention to the use of organocatalysts for the synthesis, with high yields and remarkable stereoselectivities, of optically active fine chemicals of interest for the pharmaceutical industry. A brief overview is here presented about the two main classes of substrate activation by the catalyst: covalent organocatalysis and non-covalent organocatalysis, with a more stringent focus on some recent outcomes in the field of the latter and of hydrogen bond-based catalysis. Finally, some successful examples of heterogenization of organocatalysts are also discussed, in the view of a potential industrial exploitation.

BASEL III – A new approach to improve international financial stability

Directory of Open Access Journals (Sweden)

Claudia Gabriela BAICU

2010-09-01

Full Text Available In its first part, the article highlights the factors standing at the basis of the modification of the general framework of development of the banking activity in the last decades and the main trends that manifested on the international banking market until the global financial crisis. Thenceforth, the main lessons learned from the global financial crisis for the regulation and supervision authorities are presented. The final part of the article concerns the Basel Committee answer to the global financial crisis, concretised in a reform programme regarding the regulatory framework of the banking activity. The improvements and news brought by the Basel III reform programme take into account the flaws revealed by the global financial crisis and have the purpose to strengthen the stability of the international financial system.

Basel III Forthcoming - How Swedish banks perceive the impact of the Basel III Accord and its effect on systemic risk

OpenAIRE

Jordbru, Marlene; Sjöqvist, Lina

2012-01-01

The banking sector plays an important part of the modern society and a collapse of the financial system would have severe consequences for the society. In order to protect the system from a systemic collapse, regulations have been put in place to ensure a more stable financial system. Because of the financial instabilities experienced in recent years, the Basel Committee has released an improved framework in order to deal with the systemic risk which contributed to the crisis. Parts of the ne...

WHAT WAS THE ROLE OF THE SUPERVISORY COMMITTEE RECOMMENDATIONS FOR CREDIT INSTITUTIONS AND THE REQUIREMENTS OF BASEL III

Directory of Open Access Journals (Sweden)

MEDAR LUCIAN-ION

2010-12-01

Full Text Available The economic downturn and financial crisis has negative impacted the European banking system, which determined the Basel Committee on Banking Supervision, after the implementation of "Basel I and Basel II", to conduct a new series of recommendations. The economic crisis has affected all types banking products and services, all models of supervision and all evaluation methods known. Credit institutions innovations, on the ease of promoting new products and services, absence amid of high quality capital who can absorb losses in the limit of liquidity, led to a deadlock on lending activity. Supervisory Committee appointed by the new "Basel III" recommendations, requires the introduction of minimum global standards for measuring and monitoring liquidity risk and also requires banks to triple quality capital reserve by 2015-2019, up to a 7% capital adequacy.

Cause-specific stillbirth and exposure to chemical constituents and sources of fine particulate matter.

Science.gov (United States)

Ebisu, Keita; Malig, Brian; Hasheminassab, Sina; Sioutas, Constantinos; Basu, Rupa

2018-01-01

The stillbirth rate in the United States is relatively high, but limited evidence is available linking stillbirth with fine particulate matter (PM 2.5 ), its chemical constituents and sources. In this study, we explored associations between cause-specific stillbirth and prenatal exposures to those pollutants with using live birth and stillbirth records from eight California locations during 2002-2009. ICD-10 codes were used to identify cause of stillbirth from stillbirth records. PM 2.5 total mass and chemical constituents were collected from ambient monitors and PM 2.5 sources were quantified using Positive Matrix Factorization. Conditional logistic regression was applied using a nested case-control study design (N = 32,262). We found that different causes of stillbirth were associated with different PM 2.5 sources and/or chemical constituents. For stillbirths due to fetal growth, the odds ratio (OR) per interquartile range increase in gestational age-adjusted exposure to PM 2.5 total mass was 1.23 (95% confidence interval (CI): 1.06, 1.44). Similar associations were found with resuspended soil (OR=1.25, 95% CI: 1.10, 1.42), and secondary ammonium sulfate (OR=1.45, 95% CI: 1.18, 1.78). No associations were found between any pollutants and stillbirths caused by maternal complications. This study highlighted the importance of investigating cause-specific stillbirth and the differential toxicity levels of specific PM 2.5 sources and chemical constituents. Copyright © 2017 Elsevier Inc. All rights reserved.

BASEL III IMPACT ON BANKING SECTOR AND SMEs FINANCING

Directory of Open Access Journals (Sweden)

Florin Mihai Magda

2014-07-01

Full Text Available Financial crisis devastating consequences and effects started in 2008, lead to several reactions coming from the most important international organizations and entities. This article aims to present in a logic manner, synthetic, and easily understand why these prudential reactions occurred and implemented on international level, under a new Basel III framework. Moreover, this article shall encompass also regulation environment for its implementation on the European level, known as CRD IV. This article is actual and important by identifying and underlines main measures applicable in present, their implementation schedule, as well as possible effects especially in SMEs financing. Although their effects are not yet entirely known, creates heated debates and discussions, as consequences may be major for banks and financial entities, as well as for each actor who is playing on economic environment where financing is need. I consider that all my personal conclusions and opinions on this article are important for readers, clarify and bringing into the light, simply and friendly the issues of banking environment and impact of financing under the new Basel III framework, and also presenting few measures in avoiding negative possible effects.

Relations between the Basel Index and the Level of Indebtedness of Brazilian Families

Directory of Open Access Journals (Sweden)

Sabrina Espinele da Silva

2016-08-01

Full Text Available The Basel Accord imposes a regulatory minimum capital requirement for banks to maintain their liquidity and are less susceptible to shocks from the interconnection of the financial system. Banks need to manage the dynamics of funding and applications in order to avoid excess or shortage of monetary resources, they are exposed to risks such as credit risk and liquidity risk. Credit risk is the risk that the counterparty in the transaction does not honor its obligation. Liquidity risk is the risk of the financial institution become unable to honor its obligations. The debt ratio of Brazilian families grew during the period analyzed, and a high level of debt increases the chances of default and expose financial institutions to credit risk and liquidity risk. The objective of this article is to analyze the relationship between the Basel index released by the banks and the high level of household debt in Brazil. The study used data available at the time series management system (SMS of the Central Bank of Brazil, which cover the period from January 2005 to December 2013, the following variables: Basel index, debt, inflation IPCA, Selic rate , Delinquency in SPC through an ARCH model (Autoregressive Conditional Heteroskedasticity. The results demonstrate that the Basel index, and the household debt levels have negative correlation, which makes the two vary in opposite directions. We can compare the model results for the Brazilian financial system with what was observed in the US market, as, for example, the perspective of authors who point to the beginning of the financial crisis of 2008, as a result of high indebtedness of American families in the business of mortgages.

COMPARATIVE ANALYSIS OF THE BANK’S CAPITAL ADEQUACY ACCORDING TO THE BASEL AGREEMENT

Directory of Open Access Journals (Sweden)

Tesu Ramona Vasilica

2013-07-01

ground we have the state of the economy, the economic problems, situation of the banking system. In Romania there is now a modern and competitive banking system, which provides circulation of the economy and domestic supplies banking products and services in accordance with trends in the European banking sector. In this way, the action line, I did a comparative study determining capital requirements under Basel 1, Basel 2, the standardized approaches, credit risk determined. Capitalization of Romanian bank’s remain comfortable, providing good conditions for meeting additional capital requirements Basel III. In what concerns the capital adequacy management, the leading structures of a credit institution need to establish strategies and effective policies in order to maintain, on a continuous base, a level, a correct structure of their own funds, proper for covering the risks that the credit institution is exposed to. We conclude that a bank needs to increase its own funds, which is achieved by several methods decided by management. Presentation of concrete cases in approaching the bank’s capital adequacy represent the personal work which completes the study concerning the purpose of back-up accounting in the banking system, adequate correlation of the risks and capitals.

Das Longitudinale Curriculum "Soziale und kommunikative Komptenzen" im Bologna-reformierten Medizinstudium in Basel [The longitudinal curriculum "social and communicative competencies" within Bologna-reformed undergraduate medical education in Basel

Directory of Open Access Journals (Sweden)

Langewitz, Wolf

2013-08-01

Full Text Available [english] Background: Within the Bologna reform, a longitudinal curriculum of “social and communicative competencies” (SOKO was implemented into the new Bachelor-Master structure of undergraduate medical education in Basel (Switzerland. Project description: The aim of the SOKO curriculum is to enable students to use techniques of patient-centred communication to elicit and provide information to patients in order to involve them as informed partners in decision making processes. The SOKO curriculum consists of 57 lessons for the individual student from the first bachelor year to the first master year. Teaching encompasses lectures and small group learning. Didactic methods include role play, video feedback, and consultations with simulated and real patients. Summative assessment takes place in objective structured clinical examinations (OSCE. Conclusion: In Basel, a longitudinal SOKO curriculum based on students’ cumulative learning was successfully implemented. Goals and contents were coordinated with the remaining curriculum and are regularly assessed in OSCEs. At present, most of the workload rests on the shoulders of the department of psychosomatic medicine at the university hospital. For the curriculum to be successful in the long-term, sustainable structures need to be instituted at the medical faculty and the university hospital to guarantee high quality teaching and assessment.[german] Hintergrund: Mit der Umstellung auf die Bachelor-/Masterstruktur wurde in Basel (Schweiz ein longitudinales Curriculum „soziale und Kommunikative Kompetenzen“ (SOKO in das Medizinstudium implementiert. Projektbeschreibung: Ziel ist es, den Studierenden grundlegende Techniken einer patientenzentrierten Kommunikation in dem Sinne zu vermitteln, dass die Studierenden in der Lage sind, Informationen zu erheben und Informationen an Patientinnen und Patienten weiterzugeben, um sie als gut informierte Partner am Entscheidungsprozess zu beteiligen. Das

Weiterentwicklung Gruppenleiter/innen-Kurs: Ein Projekt in der Freiwilligenarbeit des CVJM/CVJF Regionalverband Basels: Projektbericht

OpenAIRE

Fankhauser, Miriam

2016-01-01

Im folgenden Bericht geht es um das Projekt «Weiterentwicklung Gruppenleiter/innen-Kurs – Ein Pro- jekt in der Freiwilligenarbeit des CVJM/CVJF Regionalverband Basels». Dieses Projekt wurde von der Studentin Miriam Fankhauser im Rahmen der Praxisausbildung an der Hochschule Luzern für Soziale Arbeit durchgeführt. In Auftrag gegeben wurde das Projekt vom CVJM/CVJF Regionalverband Basel. Beim eben genannten Projekt ging es darum, den Gruppenleiter/innen-Kurs weiterzuentwickeln. Der Kurs rich...

The effects of Basel III liquidity regulations on banks’ profitability

Directory of Open Access Journals (Sweden)

Tafirei Mashamba

2018-05-01

Full Text Available The new Basel III Liquidity Coverage Ratio standard which encourages banks to maintain a diversified pool of high-quality liquid assets against their short-term expected net cash outflows although it appears to be noble from a theoretic perspective it may weigh down banks’ performance because liquid assets earn low returns. It is against this background that this study sought to evaluate the impact of the new Basel III liquidity regulations on the profitability of banks in emerging market economies. A sample of 40 banks operating in 11 emerging markets over the period 2011 to 2016 was used in the study. For estimation, system Generalized Method of Moments (GMM estimator was employed. Surprisingly, empirical results demonstrated that regulatory pressure stemming from Liquidity Coverage Ratio requirement increased instead of diminishing the profitability of banks in emerging markets. The plausible explanation given for this evidence was that banks in emerging markets managed their liquidity in a manner that is consistent with Liquidity Coverage Ratio rule hence the regulation had no detrimental effects on banks in emerging economies.

The Basel Institute for Immunology.

Science.gov (United States)

Melchers, Fritz

2012-01-01

At the Centennial Exhibition of the Nobel Prize, the Nobel Foundation called it one of the ten cradles of creativity. The journal Nature likened its ideals to those of the French revolution--Liberté, Egalité, Fraternité--and called it a paradise devoted to the science of immune systems: the Basel Institute for Immunology (BII). Founded by Roche in 1968, inaugurated in 1971, and closed in 2000, it was home to almost 450 scientific members, over 1,000 scientific visitors, and nearly 100 scientific advisors from more than 30 countries who worked in complete academic freedom and without commercial motives on over 3,500 projects, publishing more than 3,200 scientific papers, almost all of them on the structure and functions of immune systems of different species. This review contains a first collection of historical facts and dates that describe the background of the exceptionally successful performance and the strong scientific impact of the institute on the field of immunology.

The Impact of Basel III on European Banks

OpenAIRE

Šútorová, Barbora

2013-01-01

The aim of this thesis is to take a closer look on how the stricter capital requirements defined in the Basel III framework will influence European banks from a complex point of view - lending rates and volumes of provided loans, profitability, risk taking and market value of banks. Our analysis employing simultaneous equations and panel data models on exp post data on almost 600 banks operating in the EU in the 2005-2011 period reports following results: (1) Those banks that will be forced t...

Cost analysis on a continuously operated fine chemicals production plant at 10 kg/day using a combination of microprocessing and microwave heating

NARCIS (Netherlands)

Benaskar, F.; Ben-Abdelmoumen, A.; Patil, N.G.; Rebrov, E.; Meuldijk, J.; Hessel, V.; Hulshof, L.A.; Krtschil, U.; Schouten, J.C.

2011-01-01

An extended cost study consisting of 14 process scenarios was carried out to envisage the cost impact of microprocessing and microwaves separately or in combination for two liquid-phase model reactions in fine-chemicals synthesis: (1) Ullmann C–O cross-coupling reaction and (2) the aspirin

THE IMPACT OF NEW REGULATION ON FOUR EUROPEAN BANKING SYSTEMS. A BASEL III APPROACH

Directory of Open Access Journals (Sweden)

Anamaria AVADANEI

2013-12-01

Full Text Available One of the solutions designed to rebuild the banking system is the reconfiguration of the regulatory framework. Still active, the episodes of liquidity shortage and bank failure ask for solid measures in order to increase the solidity of individual institutions, to protect the financial stability of the banking systems and to maintain confidence on the markets. The aim of this paper is to analyze the situation of four European banking systems (Czech Republic, Poland, Romania and Croatia in terms of Basel III standards. Structured on three parts, the study points out the real concerns regarding Basel III effectiveness; analyzes the evolutions of capital, leverage and liquidity indicators and highlights the future possible scenarios/actions for aligning to the new regulation. To conclude, we determine the white and the black spots of the selected banking systems related to Basel III implementation. The results show good levels of capital in Poland, Czech Republic, Croatia and Romania, and some liquidity issues in Poland. The Czech and the Croatian banking systems are the best prepared for shocks.

A study on manufacturing technology of materials for fine chemical industry use (muscovite, sericite)

Energy Technology Data Exchange (ETDEWEB)

Yang, Jung-Il; Shin, Hee-Young; Hwang, Seon-Kook; Ahn, Ji-Hwan; Bae, Kwang-Hyun [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

1997-12-01

For the technical development on utilization of unused mineral resources, the study was carried out on the highly purification and mineral processing of domestic Sericite and Muscovite. This study was also carried out to make the functional materials for the use of fine chemical industry. Scope and content of study: 1) A study on the high purification and mineral processing for sericite and muscovite. 2) A study on the surface treatment of fine particles of sericite and muscovite. EDAX analysis on surface treated Mica shows that absorbed area on mica surface appears about 56 wt% when reaction period of 75 min. The result on image analysis on the surface treated mica comparing with that of EDAX analysis appears that the material was stabilized when passing the 1st yielding point. The dry process of surface modification on mica was applied by using {Theta}-composer. The result shows that whiteness of the mica increases upto 91 at 20 min. grinding period. Polymer microcapsulation was carried out on the mica surface. The result shows that materials appear excellent hydrophobic property which is one of important factors for making cosmetics. Based on the applying test of mineral processing on Dong-jin mica, the result shows that high quality mica is recovered. Especially, lithium mica produced in the mine will be further studied in the next year project. (author). 26 refs., 36 tabs., 61 figs.

Ecological effects and chemical composition of fine sediments in Upper Austrian streams and resulting implications for river management

Science.gov (United States)

Höfler, Sarah; Pichler-Scheder, Christian; Gumpinger, Clemens

2017-04-01

In the current scientific discussion high loads of fine sediments are considered one of the most important causes of river ecosystem degradation worldwide. Especially in intensively used catchment areas changes in the sediment household must be regarded as a reason, which prevents the achievement of the objectives of the European Water Framework Directive (WFD). Therefore, the Upper Austrian Water Authorities have launched two comprehensive studies on the topic. The first one was a survey on the current siltation status of river courses in Upper Austria. The second study deals with two selected catchments in detail, in order to get a clear picture of the impacts of the fines on the aquatic fauna (trout eggs, benthic invertebrates), the chemical composition of these fractions, the crucial hydrogeological processes and to develop possible role models for measures both in the catchments and in the streams. At eight sites within the two catchments sediment and water samples were collected at two dates for detailed chemical analysis. On one date additionally the benthic invertebrate fauna was investigated on the microhabitat level. Thereby it was possible to enhance the understanding of the range of ecological impacts caused by silting-up in different hydro-morphological circumstances and with different fine sediment loads. The water samples as well as the sediment fraction samples ethylbenzene, and xylenes), AOX (adsorbable organohalogens) and various nutrients. Additionally, the basic parameters dry residue, loss on ignition, TC (total carbon), TOC (total organic carbon) and nutrients were analysed. From the sediment eluates and the filtered water decomposition products of pesticides, remains of medical drugs, sweeteners, hormonally active substances and water-soluble elements were analysed. Furthermore, a GIS-based analysis was carried out for the two examined catchments. The model included data gained from a digital elevation model, land use data and digital soil

It Pays to Violate: How Effective are the Basel Accord Penalties?

NARCIS (Netherlands)

B. da Veiga (Bernardo); F. Chan (Felix); M.J. McAleer (Michael)

2009-01-01

textabstractThe internal models amendment to the Basel Accord allows banks to use internal models to forecast Value-at-Risk (VaR) thresholds, which are used to calculate the required capital that banks must hold in reserve as a protection against negative changes in the value of their trading

What drives the demand of monetary financial institutions for domestic government bonds? Empirical evidence on the impact of Basel II and Basel III

OpenAIRE

Lang, Michael; Schröder, Michael

2015-01-01

This paper examines the treatment of sovereign debt exposure within the Basel framework and measures the impact of bank regulation on the demand of Monetary Financial Institutions (MFI) for marketable sovereign debt. Our results suggest that bank regulation has a significant positive impact on MFI demand for domestic government securities. The results are representative for the MFI in the euro zone. They remain highly robust and significant after controlling for other influential factors and ...

Important sources and chemical species of ambient fine particles related to adverse health effects

Science.gov (United States)

Heo, J.

2017-12-01

Although many epidemiological studies have reported that exposure to ambient fine particulate matter (PM2.5) has been linked to increases in mortality and mobidity health outcomes, the key question of which chemical species and sources of PM2.5 are most harmful to public health remains unanswered in the air pollution research area. This study was designed to address the key question with evaluating the risks of exposure to chemical species and source-specific PM2.5 mass on morbidity. Hourly measurements of PM2.5 mass and its major chemical species, including organic carbon, elemental carbon, ions, and trace elements, were observed from January 1 to December 31, 2013 at four of the PM2.5 supersites in urban environments in Korea and the reuslts were used in a positive matrix factorization to estimate source contributions to PM2.5 mass. Nine sources, including secondary sulfate, secondary nitrate, mobile, biomass burning, roadway emission, industry, oil combustion, soil, and aged sea salt, were identified and secondary inorganic aerosol factors (i.e. secondary sulfalte, and secondary nitrate) were the dominant sources contributing to 40% of the total PM2.5 mass in the study region. In order to evaluate the risks of exposure to chemical species and sources of PM2.5 on morbidity, emergency room visits for cardivascular disease and respiratory disease were considered. Hourly health outcomes were compared with hourly measurments of the PM2.5 chemical species and sources using a poission generalized linear model incorporating natural splines, as well as time-stratified case-crossover design. The PM2.5 mass and speveral chemical components, such as organic carbon, elemetal carbon, zinc, and potassium, were strongly associated with morbidity. Source-apporitionmened PM2.5 mass derived from biomass burning, and mobile sources, was significantly associated with cardiovascular and respiratory diseases. The findings represent that local combustion may be particularly important

Basel III and prudent risk management in banking: Continuing the cycle of fixing past crises

Directory of Open Access Journals (Sweden)

François Laurens

2012-09-01

Full Text Available Financial crises have had a significant impact on bank regulation and supervision. Reforms are often focussed on correcting past failings. Following the 2007 financial crisis, Basel III reforms have been introduced with a view to promote a more resilient banking sector and to improve the banking sector’s ability to absorb shocks arising from financial distress. A review of the Basel III reforms and the literature on the link between capital adequacy regulations and bank stability indicates that these regulations are unlikely to prevent the failure of banks resulting in systemic crises

Basel accord and financial intermediation: The impact of policy

OpenAIRE

Berka, Martin; Zimmermann, Christian

2012-01-01

This paper studies loan activity in a context where banks must follow Basel Accord-type rules and acquire financing from households. Loan activity typically decreases when entrepreneurs' investment returns decline, and we study which type of policy could reinvigorate an economy in a trough. We find that active monetary policy increases loan volume even when the economy is in good shape; introducing active capital requirement policy can be effective as well if it implies tightening of regulati...

Vibration-Assisted Handling of Dry Fine Powders

Directory of Open Access Journals (Sweden)

Paul Dunst

2018-04-01

Full Text Available Since fine powders tend strongly to adhesion and agglomeration, their processing with conventional methods is difficult or impossible. Typically, in order to enable the handling of fine powders, chemicals are added to increase the flowability and reduce adhesion. This contribution shows that instead of additives also vibrations can be used to increase the flowability, to reduce adhesion and cohesion, and thus to enable or improve processes such as precision dosing, mixing, and transport of very fine powders. The methods for manipulating powder properties are described in detail and prototypes for experimental studies are presented. It is shown that the handling of fine powders can be improved by using low-frequency, high-frequency or a combination of low- and high-frequency vibration.

Basel’s Forgotten Pillar: The Myth of Market Discipline on the Forefront of Basel III

Directory of Open Access Journals (Sweden)

Vahit Ferhan Benli

2016-01-01

Full Text Available Although Basel II fortified the first two pillars with market transparency enhancing Pillar III disclosures and encouraged the usage of major Credit Rating Agencies (CRAs such as Moody’s, Standard and Poor’s, and Fitch as quasi governmental authorities to overcome asymmetric informational problems on risk and capital adequacy fronts of the global financial system, the recent global financial crisis has proven just the opposite. The banks and regulators were not in a position to truly assess the risk and capital adequacy frameworks of the global and domestic financial institutions based on the assessments of the rating agencies. To overcome the problem of informational asymmetry for the market participants, the Basel Committee on Banking Supervision set out new proposals for enhanced Pillar III disclosures in the areas of credit risks and capital reporting standards on the forefront of Basel III that would come into effect on April 1, 2016. This paper is a critical evaluation of the new reporting proposals of BCBS within the critical role of the credit rating agencies.

Use of geothermal energy in the region of Basel at the south-eastern end of the Rheingraben; Die Nutzung der Erdwaerme in der Region Basel am Suedostende des Rheingrabens

Energy Technology Data Exchange (ETDEWEB)

Hauber, L

1997-12-01

The idea of using geothermal energy in the Basel region came up during the years 1973-1980, due to the shortages in oil and gas supply. Independency of foreign suppliers, diversification and renewable energies have been demanded. Geothermal energy was one of the possibilities discussed in those years. Today, geothermal energy is also and mainly seen as a environmental clean energy without output of CO{sub 2} and other gases. For these reasons, and because it is well known that the Rheingraben has a good geothermal gradient, the two Cantons of Basel-Stadt and Basel-Land made efforts to develop the use of this energy. The Canton Basel-Stadt together with the Community of Riehen decided to test these possibilities with two wells (1988-1990). The well Riehen 1 (depth 1`547 m) showed in the Upper Muschelkalk a pumping rate of 20,5 l/s with a temperature of 66,4 C and Riehen 2 (depth 1`247 m) made 22 l/s with 52,2 C. The salinity of the water was 17 g/l (Riehen 1) and 14 g/l (Riehen 2), mainly NaCl and CaSO{sub 4}, together with CO{sub 2}. Due to the high salinity, well Riehen 2 is used as a production well, Riehen 2 as a rejection well. Riehen decided to construct a distant heating system and therefore it was possible to add the geothermal energy into this system, avoiding the consumption of 1750 t oil per year (=50%). The power of the whole heating system is 15`200 kW. Production started in April 1994. (orig.) [Deutsch] In den vergangenen Jahren sind in der Region Basel 3 Geothermiebohrungen zur Nutzung der Erdwaerme abgetieft worden: Riehen 1: 1`547 m tief T=66,4 C Salinitaet=17`031,9 mg/l Gradient=4,05 C/100 m Riehen 2: 1`247 m tief T=52,2 C Salinitaet 14`162,7 mg/l Gradient=3,65 C/100 m Reinach 1: 1`793 m tief T=78,0 C Salinitaet=43`896 mg/l Gradient=3,75 C/100 m Riehen 1 und 2 erwiesen sich von der Ergiebigkeit (>20 l/s) her als interesant, waehrend Reinach 1 als Misserfolg bezeichnet werden muss, da keine nutzbare Menge gefoerdert werden konnte und auch die

Conference Report: The 2016 Olten Meeting at the Basel Life Science Week.

Science.gov (United States)

Heinzelmann, Elsbeth

2016-12-21

"This 'telephone' has too many shortcomings to be seriously considered as a means of communication. The device is inherently of no value to us." This was an internal memo written by Western Union in 1876. That's right. Without efficient knowledge sharing and technology transfer, even the best scientific development may prove to be a damp squib for a long time. The Basel Life Science Week was created in order to promote scientific and economic exchange and pave the way for innovative ideas. That's why NTN Swiss Biotech has moved its traditional 'Olten Meeting' to the Basel Life Science Week. It is the ideal setting for NTN Swiss Biotech and the School of Life Sciences FHNW to present innovative developments within its network of academic and industrial partners in the future-oriented disciplines of Molecular Diagnostics and Medicinal Chemistry. Short summaries of the key lectures are reported below.

Choosing Expected Shortfall Over VaR in Basel III Using Stochastic Dominance

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); J.A. Jiménez-Martín (Juan-Ángel); E. Maasoumi (Esfandiar); M.J. McAleer (Michael); T. Pérez-Amaral (Teodosio)

2016-01-01

textabstractWe compare Value at Risk (VaR) and Expected Shortfall (ES) following a Stochastic Dominance (SD) approach frequently used to order distributions in terms of welfare and in portfolio selection. Basel Committee on Banking Supervision (BCBS) recommends bank risk managers to shift the

Impact and Limitations Deriving from Basel II within the Context of the Current Financial Crisis

Directory of Open Access Journals (Sweden)

Oana Miruna DĂNILĂ

2012-06-01

Full Text Available The Banking sector risk management framework, geared towards maintaining a solid capital adequacy level, has witnessed a permanent evolution, determined by the global economic and financial reality.Basel II has brought an improvement of the risk management framework by adding minimum capital levels corresponding to market and operational risk and by the introduction of internal rating models. However the current crisis has brought forward some adverse effects as well as limitations.This paper analyses the evolution of prudential rules and regulations introduced by Basel II and their impact on the banking system together with outlining certain limitations.

Studies on manufacturing technology of materials for fine chemical and electronic industry use

Energy Technology Data Exchange (ETDEWEB)

Choi, S K; Kim, B G; Chung, H S; Lee, J C [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

1997-12-01

Fine natural crystalline graphite which is used as a source material of a high electrically conductive film and an addition of advanced high functional solid lubricant. For use high electrically conductive film and advanced high functional solid lubricant, add new and advanced high functional properties to fine graphite powder through surface modification with gas and organic materials. Surface modification methods: 1) Searching for suitable surfactant to improve dispersing characteristics in aqueous system. 2) Adsorption with oxygen on graphite surface to improve dispersing characteristics in oil. 3) Mechanochemical process using hybridization system is to shape control and spontaneous re-arrangement of the surface layer and interaction between the particle surface and extraneous molecules. In aqueous system, the optimum conditions for graphite to disperse is with 0.3-0.5% concentrations of surfactant Lomar D PWA-40 at pH range 10-11. In order to improve dispersing characteristics in oil, the optimum conditions to adsorb over 3.5% with oxygen on graphite surface are as follows: - Tip speed {yields} 3.9 m/sec, - Reaction time {yields} at least 30 min. at 120 deg.C - inert gas and pressure {yields} dried air, 1 kgf/cm{sup 2}. The oxygen contents acts critical point for dispersing graphite in oil system so needs to control oxygen contents by use of air pressure in reacting mill. Chemical methods for coating with Stearic acid and Paraffin need above 15 weight % to graphite powders. Mechanochemical process using hybridization system is to shape control and spontaneous re-arrangement of the surface layer and interaction between the particle surface and extraneous molecules. (author). 45 refs., 9 tabs., 23 figs.

The chemical and biological evolution of mature fine tailings in oil sands end-pit lakes

International Nuclear Information System (INIS)

Chen, M.; Weisener, C.; Ciborowski, J.

2010-01-01

This presentation described an innovative bench-scale technique to characterize oil sand tailings and their impact on sediment oxygen demand (SOD) for future end-pit lake model behaviour. SOD is a dominant contributor to oxygen depletion in wetlands. The function and sustainability of a wetland ecosystem depends on the biochemical processes occurring at the sediment-water interface. The biochemical reactions associated with natural sediment can change with the addition of oil sands processed material (OSPM), which can affect SOD and ecosystem viability. It is important to establishing the biotic and abiotic controls of SOD. In order to evaluate the effectiveness of current wetland reclamation designs, it is important to establish the biotic and abiotic controls of SOD. The REDOX chemistry of fresh tailings sediment (MFT) was measured in this laboratory microcosm to determine the chemical and biological influences, and to study the role of developing microbial communities as new mature fine tailings (MFT) age. The study evaluated the changes in the main chemical, physical and biological populations of the MFT in both aerobic and anaerobic microcosms. A combination of microelectrode arrays and DNA profiling at the tailings water interface was used in the study.

Evaluation of the Electricity Saving Fund in Basel, Switzerland; Evaluation des Stromsparfonds Basel

Energy Technology Data Exchange (ETDEWEB)

Iten, R; Vettori, A; Schmidt, N [Infras, Zuerich (Switzerland); Vaterlaus, S; Wild, J [Plaut (Schweiz) Consulting AG, Bern (Switzerland)

2003-09-15

This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of an evaluation made concerning the Electricity Saving Fund operated in Basel, Switzerland. The aims of the fund, which is based on the imposition of a steering levy on electricity consumption, are presented and discussed. It is noted that the political policies behind this promotional scheme differ greatly from those of other Swiss Cantons. This study examines the direct and indirect effects of the steering levy and the resulting bonus for energy-saving consumers and takes a look at possibilities for transferring the idea to other Swiss Cantons. Questions asked include the degree to which the aims were fulfilled, were negative side-effects noted, is the implementation efficient, can the know-how gained be transferred to other communities and Cantons and which general experience was gained in the application of steering levies. Details on the implementation of the Electricity Saving Bonus are presented and discussed. Results of a survey on the perception of the scheme both in the commercial and private sectors are discussed. Also, the results of evaluations made concerning the degree to which the scheme's aims were fulfilled and their usefulness from the national economics point of view are discussed. Suggestions for improvements are presented. The report is concluded with an a selection of annexes on the topics dealt with in the report

Evaluation of the Electricity Saving Fund in Basel, Switzerland; Evaluation des Stromsparfonds Basel

Energy Technology Data Exchange (ETDEWEB)

Iten, R.; Vettori, A.; Schmidt, N. [Infras, Zuerich (Switzerland); Vaterlaus, S.; Wild, J. [Plaut (Schweiz) Consulting AG, Bern (Switzerland)

2003-09-15

This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of an evaluation made concerning the Electricity Saving Fund operated in Basel, Switzerland. The aims of the fund, which is based on the imposition of a steering levy on electricity consumption, are presented and discussed. It is noted that the political policies behind this promotional scheme differ greatly from those of other Swiss Cantons. This study examines the direct and indirect effects of the steering levy and the resulting bonus for energy-saving consumers and takes a look at possibilities for transferring the idea to other Swiss Cantons. Questions asked include the degree to which the aims were fulfilled, were negative side-effects noted, is the implementation efficient, can the know-how gained be transferred to other communities and Cantons and which general experience was gained in the application of steering levies. Details on the implementation of the Electricity Saving Bonus are presented and discussed. Results of a survey on the perception of the scheme both in the commercial and private sectors are discussed. Also, the results of evaluations made concerning the degree to which the scheme's aims were fulfilled and their usefulness from the national economics point of view are discussed. Suggestions for improvements are presented. The report is concluded with an a selection of annexes on the topics dealt with in the report

Basel liquidity regulation: was it improved with the 2013 revisions?

OpenAIRE

Kowalik, Michal

2013-01-01

The Basel III Accord of December 2010, aiming to reduce the chances of systemic financial crises, included provisions regulating the liquid assets held by financial institutions. The Accord included provisions requiring financial institutions to maintain liquidity buffers: stocks of liquid assets sufficient to cover 30 days of cash outflow in a financial "stress event." ; The Accord was revised in January 2013, with new provisions regarding the size, composition and availability of liquidity ...

Update on the Chemical Composition Of Crystalline, Smectite, and Amorphous Components for Rocknest Soil and John Klein and Cumberland Mudstone Drill Fines at Gale Crater, Mars

Science.gov (United States)

Morris, R. V.; Ming, D. W.; Gellert, R.; Vaniman, D. T.; Bish, D. L.; Blake, D. F.; Chipera, S. J.; Morrison, S. M.; Downs, R. T.; Rampe, E. B.;

IMPLEMENTATION OF BASEL III IN THE EUROPEAN BANKING SECTOR

Directory of Open Access Journals (Sweden)

Ioana Sbarcea

2015-06-01

Full Text Available In this work, which is part of a larger research project aimed at the expected impact of Basel III on commercial banks in Romania, I decided to analyse the implementation and transposition of the new international prudential requirements into European regulations, which are of particular interest for the Romanian banking sector. I started this analysis by highlighting the peculiarities of the European banking sector at aggregate level, but also as a cross-country survey, to later highlight the views of European regulations on prudential supervision and differences to international regulations.

The Basel Face Database: A validated set of photographs reflecting systematic differences in Big Two and Big Five personality dimensions.

Science.gov (United States)

Walker, Mirella; Schönborn, Sandro; Greifeneder, Rainer; Vetter, Thomas

2018-01-01

Upon a first encounter, individuals spontaneously associate faces with certain personality dimensions. Such first impressions can strongly impact judgments and decisions and may prove highly consequential. Researchers investigating the impact of facial information often rely on (a) real photographs that have been selected to vary on the dimension of interest, (b) morphed photographs, or (c) computer-generated faces (avatars). All three approaches have distinct advantages. Here we present the Basel Face Database, which combines these advantages. In particular, the Basel Face Database consists of real photographs that are subtly, but systematically manipulated to show variations in the perception of the Big Two and the Big Five personality dimensions. To this end, the information specific to each psychological dimension is isolated and modeled in new photographs. Two studies serve as systematic validation of the Basel Face Database. The Basel Face Database opens a new pathway for researchers across psychological disciplines to investigate effects of perceived personality.

Pelletization of fine coals. Final report

Energy Technology Data Exchange (ETDEWEB)

Sastry, K.V.S.

1995-12-31

Coal is one of the most abundant energy resources in the US with nearly 800 million tons of it being mined annually. Process and environmental demands for low-ash, low-sulfur coals and economic constraints for high productivity are leading the coal industry to use such modern mining methods as longwall mining and such newer coal processing techniques as froth flotation, oil agglomeration, chemical cleaning and synthetic fuel production. All these processes are faced with one common problem area--fine coals. Dealing effectively with these fine coals during handling, storage, transportation, and/or processing continues to be a challenge facing the industry. Agglomeration by the unit operation of pelletization consists of tumbling moist fines in drums or discs. Past experimental work and limited commercial practice have shown that pelletization can alleviate the problems associated with fine coals. However, it was recognized that there exists a serious need for delineating the fundamental principles of fine coal pelletization. Accordingly, a research program has been carried involving four specific topics: (i) experimental investigation of coal pelletization kinetics, (ii) understanding the surface principles of coal pelletization, (iii) modeling of coal pelletization processes, and (iv) simulation of fine coal pelletization circuits. This report summarizes the major findings and provides relevant details of the research effort.

Medicine procurement in hospital pharmacies of Nepal: A qualitative study based on the Basel Statements

Science.gov (United States)

Ranjit, Eurek

2018-01-01

Background Accessibility and affordability of evidence-based medicines are issues of global concern. For low-income countries like Nepal, it is crucial to have easy and reliable access to affordable, good-quality, evidence-based medicines, especially in the aftermath of natural or manmade disasters. Availability of affordable and evidence-based high quality medicines depends on the medicine procurement procedure, which makes it an important aspect of healthcare delivery. In this study, we aimed to investigate medicine procurement practices in hospital pharmacies of Nepal within the framework of International Pharmaceutical Federation [FIP] hospital pharmacy guidelines “the Basel Statements”. Method We conducted semi-structured interviews with hospital pharmacists or procurement officers in hospital pharmacies of four major regions in Nepal to explore procurement practices. Data were collected until saturation of themes, analysed using the framework approach, and organised around the statements within the procurement theme of the Basel Statements. Results Interviews conducted with 53 participants revealed that the procurement guidelines of the Basel Statements were adopted to a certain extent in hospital pharmacies of Nepal. It was found that the majority of hospital pharmacies in Nepal reported using an expensive direct-procurement model for purchasing medicines. Most had no formulary and procured medicines solely based on doctors’ prescriptions, which were heavily influenced by pharmaceutical companies’ marketing strategies. Whilst most procured only registered medicines, a minority reported purchasing unregistered medicines through unauthorised supply-chains. And although the majority of hospital pharmacies had some contingency plans for managing medicine shortages, a few had none. Conclusions Procurement guidelines of the Basel Statements were thus found to be partially adopted; however, there is room for improvement in current procurement practices in

Medicine procurement in hospital pharmacies of Nepal: A qualitative study based on the Basel Statements.

Science.gov (United States)

Shrestha, Mina; Moles, Rebekah; Ranjit, Eurek; Chaar, Betty

2018-01-01

Accessibility and affordability of evidence-based medicines are issues of global concern. For low-income countries like Nepal, it is crucial to have easy and reliable access to affordable, good-quality, evidence-based medicines, especially in the aftermath of natural or manmade disasters. Availability of affordable and evidence-based high quality medicines depends on the medicine procurement procedure, which makes it an important aspect of healthcare delivery. In this study, we aimed to investigate medicine procurement practices in hospital pharmacies of Nepal within the framework of International Pharmaceutical Federation [FIP] hospital pharmacy guidelines "the Basel Statements". We conducted semi-structured interviews with hospital pharmacists or procurement officers in hospital pharmacies of four major regions in Nepal to explore procurement practices. Data were collected until saturation of themes, analysed using the framework approach, and organised around the statements within the procurement theme of the Basel Statements. Interviews conducted with 53 participants revealed that the procurement guidelines of the Basel Statements were adopted to a certain extent in hospital pharmacies of Nepal. It was found that the majority of hospital pharmacies in Nepal reported using an expensive direct-procurement model for purchasing medicines. Most had no formulary and procured medicines solely based on doctors' prescriptions, which were heavily influenced by pharmaceutical companies' marketing strategies. Whilst most procured only registered medicines, a minority reported purchasing unregistered medicines through unauthorised supply-chains. And although the majority of hospital pharmacies had some contingency plans for managing medicine shortages, a few had none. Procurement guidelines of the Basel Statements were thus found to be partially adopted; however, there is room for improvement in current procurement practices in hospital pharmacies of Nepal. Adoption and

Medicine procurement in hospital pharmacies of Nepal: A qualitative study based on the Basel Statements.

Directory of Open Access Journals (Sweden)

Mina Shrestha

Full Text Available Accessibility and affordability of evidence-based medicines are issues of global concern. For low-income countries like Nepal, it is crucial to have easy and reliable access to affordable, good-quality, evidence-based medicines, especially in the aftermath of natural or manmade disasters. Availability of affordable and evidence-based high quality medicines depends on the medicine procurement procedure, which makes it an important aspect of healthcare delivery. In this study, we aimed to investigate medicine procurement practices in hospital pharmacies of Nepal within the framework of International Pharmaceutical Federation [FIP] hospital pharmacy guidelines "the Basel Statements".We conducted semi-structured interviews with hospital pharmacists or procurement officers in hospital pharmacies of four major regions in Nepal to explore procurement practices. Data were collected until saturation of themes, analysed using the framework approach, and organised around the statements within the procurement theme of the Basel Statements.Interviews conducted with 53 participants revealed that the procurement guidelines of the Basel Statements were adopted to a certain extent in hospital pharmacies of Nepal. It was found that the majority of hospital pharmacies in Nepal reported using an expensive direct-procurement model for purchasing medicines. Most had no formulary and procured medicines solely based on doctors' prescriptions, which were heavily influenced by pharmaceutical companies' marketing strategies. Whilst most procured only registered medicines, a minority reported purchasing unregistered medicines through unauthorised supply-chains. And although the majority of hospital pharmacies had some contingency plans for managing medicine shortages, a few had none.Procurement guidelines of the Basel Statements were thus found to be partially adopted; however, there is room for improvement in current procurement practices in hospital pharmacies of Nepal

GFC-Robust Risk Management Under the Basel Accord Using Extreme Value Methodologies

NARCIS (Netherlands)

P.A. Santos (Paulo Araújo); J.A. Jiménez-Martín (Juan-Ángel); M.J. McAleer (Michael); T. Pérez-Amaral (Teodosio)

2011-01-01

textabstractIn McAleer et al. (2010b), a robust risk management strategy to the Global Financial Crisis (GFC) was proposed under the Basel II Accord by selecting a Value-at-Risk (VaR) forecast that combines the forecasts of different VaR models. The robust forecast was based on the median of the

BASEL III: long-term impact on economic performance and fluctuations

OpenAIRE

Paolo Angelini; Laurent Clerc; Vasco Cúrdia; Leonardo Gambacorta; Andrea Gerali; Alberto Locarno; Roberto Motto; Werner Roeger; Skander J. van den Heuvel; Jan Vlcek

2011-01-01

We assess the long-term economic impact of the new regulatory standards (the Basel III reform), answering the following questions: 1) What is the impact of the reform on longterm economic performance? 2) What is the impact of the reform on economic fluctuations? 3) What is the impact of the adoption of countercyclical capital buffers on economic fluctuations? The main results are the following: 1) Each percentage point increase in the capital ratio causes a median 0.09 percent decline in the ...

The Concept of Capital within the Framework of Basel II

OpenAIRE

Georg von Pföstl

2007-01-01

The new Basel II Capital Accord has been one of the financial sector’s most fiercely discussed topics in the recent past. After many years’ debate, the regulations formally took effect on January 1, 2007, and the advanced measurement approaches are scheduled to become fully operational on January 1, 2008. The new regulations will cause a number of changes in the area of credit risk. The calculation of risk-weighted assets, and thus of regulatory capital, will henceforth be based on borrowers’...

THE NEED TO REFORM THE BANKING SYSTEM – A PREMISE FOR THE IMPLEMENTATION OF THE BASEL III ACCORD

Directory of Open Access Journals (Sweden)

Cosma Daniela

2013-07-01

Many of the changes in the banking system are inspired by the final draft of the G-20 reunion, that of developed countries, in November 2008, a draft considering the economic re-launch and reform. Basel III considers the reform of the banking system by measures whose cover area is much larger and they refer to both the micro-prudential framework and to the macro-prudential one. The application of all the measures established by Basel III Accord is expected to end by 2019, with different effects in the main segments of banking business: retail, corporate and investment banking. The impact of Basel III implementation in the banking system of the USA is almost similar to that of Europe’s, with slight differences regarding the capital and the reduction of mortgage rights, which play a more important role in the USA, the latter having another starting economic point than Europe.

Radiological and microanalytical studies of fine Melnik wines

International Nuclear Information System (INIS)

Tonev, Dimiter; Geleva, Elena; Damianova, Anna; Grigorov, Todor; Goutev, Nikolai; Protohristov, Hristo; Stoyanov, Chavdar; Bashev, Vladimir; Popov, Evgeni; Tringovska, Ivanka; Kostova, Dimitrina

2016-01-01

Nuclear methods and chemical fingerprinting can help in the process of determination of the year of production (vintage) and the geographical provenance or designation of origin of high quality wines. For the first time we report results obtained for fine Bulgarian wines from Melnik region, as well as, vineyard soil, vine stems and grape leaves. The gamma-ray activity of the radioisotope 137 Cs has been measured also for the first time in wines from different vintages using low background, high resolution gamma-ray spectrometry. The specific concentrations of 16 elements have been measured in samples from soil, vine stems, grape leaves and fine wines from the type Shiroka Melnishka, which are grown in typical Melnik vineyard by means of Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). The obtained radiological and chemical correlations can be used as initial data base in order to determinate the wine vintage back to 1986 and, eventually, as tool to establish the designation of origin of the Melnik fine wine and the quality of the wine

Effects of fly ash fineness on the mechanical properties of concrete

Indian Academy of Sciences (India)

ash to have positive impact on mechanical properties of concrete. ... coarse ashes and their physical–chemical properties were evaluated. ... important factor affecting index of puzzolanic activity was fineness of the fly ash, not its chemical.

Sustainable development in city districts: BaLaLuZ project - Gundeldinger Feld - Phase 1; Schlussbericht Quartier Gundeldingerfeld Basel - Phase 1

Energy Technology Data Exchange (ETDEWEB)

Binz, A.; Voyame, J.-P.

2004-07-01

This final report for the Swiss Federal Office of Energy (SFOE) is one of a series of reports concerning municipal development in various cities in Switzerland. The four city districts involved include Basel (Gundeldinger Feld), Lausanne (Bellevaux), Lucerne (Basel-/Bernstrasse) and Zurich (Werdwies). This final report summarises the results of the first phase of the project in Gundeldinger Feld, Basel. In an analysis of the initial situation in the Gundeldinger Feld, ecological and economical aspects are examined as are questions concerning mobility and urban planning. The various players involved are introduced and their expectations reviewed; work done and the involvement of the local inhabitants in the project are looked at. Measures to be taken to realise the visions proposed are discussed and suggestions for projects are made.

Climatology of local flow patterns around Basel

Energy Technology Data Exchange (ETDEWEB)

Weber, R.O. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-06-01

Recently a method has been developed to classify local-scale flow patterns from the wind measurements at a dense network of stations. It was found that in the MISTRAL area around Basel a dozen characteristic flow patterns occur. However, as the dense network of stations ran only during one year, no reliable climatology can be inferred from these data, especially the annual cycle of the flow patterns is not well determined from a single year of observations. As there exist several routinely operated stations in and near the MISTRAL area, a method was searched to identify the local flow patterns from the observations at the few routine stations. A linear discriminant analysis turned out to be the best method. Based of data from 11 stations which were simultaneously operated during 1990-1995 a six-year climatology of the flow patterns could be obtained. (author) 1 fig., 1 tab., 3 refs.

Loss distribution approach for operational risk capital modelling under Basel II: Combining different data sources for risk estimation

Directory of Open Access Journals (Sweden)

Pavel V. Shevchenko

2013-07-01

Full Text Available The management of operational risk in the banking industry has undergone significant changes over the last decade due to substantial changes in operational risk environment. Globalization, deregulation, the use of complex financial products and changes in information technology have resulted in exposure to new risks very different from market and credit risks. In response, Basel Committee for banking Supervision has developed a regulatory framework, referred to as Basel II, that introduced operational risk category and corresponding capital requirements. Over the past five years, major banks in most parts of the world have received accreditation under the Basel II Advanced Measurement Approach (AMA by adopting the loss distribution approach (LDA despite there being a number of unresolved methodological challenges in its implementation. Different approaches and methods are still under hot debate. In this paper, we review methods proposed in the literature for combining different data sources (internal data, external data and scenario analysis which is one of the regulatory requirement for AMA.

Preliminary evaluation of physical and chemical characterization of waste palm oil shell as cool material replaced in asphaltic concrete as fine aggregate

Science.gov (United States)

Anuar, M. A. M.; Anting, N.; Shahidan, S.; Lee, Y. Y.; Din, M. F. Md; Khalid, F. S.; Nazri, W. M. H. W.

2017-11-01

Malaysia is one of the biggest producer of palm oil product and currently as main source of economy for the country. During the production of crude palm oil, a large amount of waste material is generated, such as palm oil fibres, palm oil shells and empty fruit bunches. Palm oil shell aggregate (POSA) is identified as a material that shows good potential to be used as a fine aggregate replacement in asphaltic concrete. On other hand, the chemical compound that exist in the Palm Oil Shell (POS) have shown a good potential as reflective component in cool-material. The purpose of this study is to obtain the physical and chemical properties of palm oil shell. The result shows the apparent particle density of Palm Oil Shell is 1.6 mg/m3. The specific gravity of palm oil shell was obtained with the value 1.6 and the water absorption amount of palm oil shell recorded from this study was 25.1%. The X-Ray Fluorescence study shows that palm oil shell contains the highest amount of SiO2 (46.412 wt%) and the second highest amount of Fe2O3 (34.016 wt%), both is the main output of relectivity compound. As a conclusion, waste palm oil shell has a potential to be used as alternative material for fine aggregate replacement. Besides that, the amount of chemical element that consist in palm oil shell which high in SiO2 and Fe2O3, promising the benefit to mitigate urban heat island as a cooling material agent.

Integrating Seasonal Oscillations into Basel II Behavioural Scoring Models

Directory of Open Access Journals (Sweden)

Goran Klepac

2007-09-01

Full Text Available The article introduces a new methodology of temporal influence measurement (seasonal oscillations, temporal patterns for behavioural scoring development purposes. The paper shows how significant temporal variables can be recognised and then integrated into the behavioural scoring models in order to improve model performance. Behavioural scoring models are integral parts of the Basel II standard on Internal Ratings-Based Approaches (IRB. The IRB approach much more precisely reflects individual risk bank profile.A solution of the problem of how to analyze and integrate macroeconomic and microeconomic factors represented in time series into behavioural scorecard models will be shown in the paper by using the REF II model.

Excessive credit growth and countercyclical capital buffers in basel III: an empirical evidence from central and east european countries

OpenAIRE

Seidler, Jakub; Gersl, Adam

2012-01-01

Excessive credit growth is often considered to be an indicator of future problems in the financial sector. This paper examines the issue of how best to determine whether the observed level of private sector credit is excessive in the context of the “countercyclical capital buffer”, a macroprudential tool proposed in the new regulatory framework of Basel III by the Basel Committee on Banking Supervision. An empirical analysis of selected Central and Eastern European countries, including the Cz...

An Optimal Portfolio and Capital Management Strategy for Basel III Compliant Commercial Banks

Directory of Open Access Journals (Sweden)

Grant E. Muller

2014-01-01

Full Text Available We model a Basel III compliant commercial bank that operates in a financial market consisting of a treasury security, a marketable security, and a loan and we regard the interest rate in the market as being stochastic. We find the investment strategy that maximizes an expected utility of the bank’s asset portfolio at a future date. This entails obtaining formulas for the optimal amounts of bank capital invested in different assets. Based on the optimal investment strategy, we derive a model for the Capital Adequacy Ratio (CAR, which the Basel Committee on Banking Supervision (BCBS introduced as a measure against banks’ susceptibility to failure. Furthermore, we consider the optimal investment strategy subject to a constant CAR at the minimum prescribed level. We derive a formula for the bank’s asset portfolio at constant (minimum CAR value and present numerical simulations on different scenarios. Under the optimal investment strategy, the CAR is above the minimum prescribed level. The value of the asset portfolio is improved if the CAR is at its (constant minimum value.

EPA Fines Conyers Firm for Not Filing a Report

Science.gov (United States)

Contains Dec. 20, 1998 newspaper article in Atlanta Constitution on fine of Bio - Lab Incorporated, in Conyers, Rockdale County, Georgia for failing to report releases of toxic chemicals into the environment.

Chemical compositions and sources of organic matter in fine particles of soils and sands from the vicinity of Kuwait city.

Science.gov (United States)

Rushdi, Ahmed I; Al-Zarban, Sheikha; Simoneit, Bernd R T

2006-09-01

Fine particles in the atmosphere from soil and sand resuspension contain a variety of organic compounds from natural biogenic and anthropogenic matter. Soil and sand samples from various sites near Kuwait city were collected, sieved to retain the fine particles, and extracted with a mixture of dichloromethane and methanol. The extracts were derivatized and analyzed by gas chromatography-mass spectrometry in order to characterize the chemical compositions and sources of the organic components. The major inputs of organic compounds were from both natural biogenic and anthropogenic sources in these samples. Vegetation was the major natural source of organic compounds and included n-alkanols, n-alkanoic acids, n-alkanes, sterols and triterpenoids. Saccharides had high concentrations (31-43%) in the sand dune and seafront samples, indicating sources from decomposed vegation materials and/or the presence of viable microbiota such as bacteria and fungi. Vehicular emission products, leakage of lubricating oils, discarded plastics and emissions from cooking operations were the major anthropogenic inputs in the samples from the urban areas. This input was mainly UCM, n-alkanes, hopanes, plasticizers and cholesterol, respectively.

A Stochastic Dominance Approach to the Basel III Dilemma: Expected Shortfall or VaR?

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); J.A. Jiménez-Martín (Juan-Ángel); E. Maasoumi (Esfandiar); M.J. McAleer (Michael); T. Pérez-Amaral (Teodosio)

2015-01-01

markdownabstract__Abstract__ The Basel Committee on Banking Supervision (BCBS) (2013) recently proposed shifting the quantitative risk metrics system from Value-at-Risk (VaR) to Expected Shortfall (ES). The BCBS (2013) noted that “a number of weaknesses have been identified with using VaR for

Has the Basel II Accord Encouraged Risk Management During the 2008-09 Financial Crisis?

NARCIS (Netherlands)

M.J. McAleer (Michael); J.A. Jiménez-Martín (Juan-Ángel); T. Pérez-Amaral (Teodosio)

2009-01-01

textabstractThe Basel II Accord requires that banks and other Authorized Deposit-taking Institutions (ADIs) communicate their daily risk forecasts to the appropriate monetary authorities at the beginning of each trading day, using one or more risk models to measure Value-at-Risk (VaR). The risk

An Assessment of the Internal Rating Based Approach in Basel II

OpenAIRE

Simone Varotto

2008-01-01

The new bank capital regulation commonly known as Basel II includes a internal rating based approach (IRB) to measuring credit risk in bank portfolios. The IRB relies on the assumptions that the portfolio is fully diversified and that systematic risk is driven by one common factor. In this work we empirically investigate the impact of these assumptions by comparing the risk measures produced by the IRB with those of a more general credit risk model that allows for multiple systematic risk fac...

Transport-related measures to mitigate climate change in Basel, Switzerland: A health-effectiveness comparison study.

Science.gov (United States)

Perez, L; Trüeb, S; Cowie, H; Keuken, M P; Mudu, P; Ragettli, M S; Sarigiannis, D A; Tobollik, M; Tuomisto, J; Vienneau, D; Sabel, C; Künzli, N

2015-12-01

Local strategies to reduce green-house gases (GHG) imply changes of non-climatic exposure patterns. To assess the health impacts of locally relevant transport-related climate change policies in Basel, Switzerland. We modelled change in mortality and morbidity for the year 2020 based on several locally relevant transport scenarios including all decided transport policies up to 2020, additional realistic and hypothesized traffic reductions, as well as ambitious diffusion levels of electric cars. The scenarios were compared to the reference condition in 2010 assumed as status quo. The changes in non-climatic population exposure included ambient air pollution, physical activity, and noise. As secondary outcome, changes in Disability-Adjusted Life Years (DALYs) were put into perspective with predicted changes of CO2 emissions and fuel consumption. Under the scenario that assumed a strict particle emissions standard in diesel cars and all planned transport measures, 3% of premature deaths could be prevented from projected PM2.5 exposure reduction. A traffic reduction scenario assuming more active trips provided only minor added health benefits for any of the changes in exposure considered. A hypothetical strong support to electric vehicles diffusion would have the largest health effectiveness given that the energy production in Basel comes from renewable sources. The planned local transport related GHG emission reduction policies in Basel are sensible for mitigating climate change and improving public health. In this context, the most effective policy remains increasing zero-emission vehicles. Copyright © 2015 Elsevier Ltd. All rights reserved.

New methods and standards for fine dust

International Nuclear Information System (INIS)

Spielvogel, Juergen; Hartstock, Stefan; Grimm, Hans

2009-01-01

There seems to be common agreement that PM10 is a suboptimal quantity for the quantification of potential dangers from fine dust due to a number of reasons, notably because the chemical composition of the particles is not considered, because the size distribution is disregarded, and because of sampling artefacts. In a first step for improving the particle measurements, the European Community has published new directives for ambient air in June 2008 (EU 2008), which as a main part included new regulations for PM2.5 measurements, in addition to the further on valid regulations for PM10. The comparison of PM2.5 and PM10 may allow a source apportionment and a better assessment of the influence of fine dust on human health. The source apportionment may allow more effective fine dust reduction strategies.

A Global Perspective of Fine Particulate Matter Pollution and Its Health Effects.

Science.gov (United States)

Mukherjee, Arideep; Agrawal, Madhoolika

Fine particulate matter (PM) in the ambient air is implicated in a variety of human health issues throughout the globe. Regulation of fine PM in the atmosphere requires information on the dimension of the problem with respect to variations in concentrations and sources. To understand the current status of fine particles in the atmosphere and their potential harmful health effects in different regions of the world this review article was prepared based on peer-reviewed scientific papers, scientific reports, and database from government organizations published after the year 2000 to evaluate the global scenario of the PM 2.5 (particles levels and exceedances of national and international standards were several times higher in Asian countries, while levels in Europe and USA were mostly well below the respective standards. Vehicular traffic has a significant influence on PM 2.5 levels in urban areas; followed by combustion activities (biomass, industrial, and waste burning) and road dust. In urban atmosphere, fine particles are mostly associated with different health effects with old aged people, pregnant women, and more so children being the most susceptible ones. Fine PM chemical constituents severely effect health due to their carcinogenic or mutagenic nature. Most of the research indicated an exceedance of fine PM level of the standards with a diverse array of health effects based on PM 2.5 chemical constituents. Emission reduction policies with epidemiological studies are needed to understand the benefits of sustainable control measures for fine PM mitigation.

BASEL III IMPACT ON ROMANIAN BANKING SYSTEM PERFORMANCE

Directory of Open Access Journals (Sweden)

Mariana G. NEDELCU (BUNEA

2014-04-01

Full Text Available In the context of economic and financial crisis triggered in EU by autumn 2008, Romania's banking system like that in the other European countries, faced with the consequences of decreasing the standard of living the worsening of purchasing power (in terms of retail and with gaps and Delay occurred in the payment of corporate clients. However the deteriorating the quality of bank investments, increasing non-performing loans in bank portfolios totate ultimately causing the accumulation of excessive risks that banks were exposed. On the background of the crisis, the impact of Basel III is not only a financial regulation that is applicable to the banking industry and will fundamentally determine the profitability of the banking system. Through this study, we propose a series of measures applicable to the credit institutions to mitigate the impact of alignment with the new capital requirements.

The Impact of Islamic Securitization (Sukuk on the banks’ Liquidity within Basel 3 Requirements.

Directory of Open Access Journals (Sweden)

Bakhita Hamdow Gad Elkreem

2017-02-01

Full Text Available Abstract: This study aims to investigate the relation between Islamic securitization representing in Sukuk, and the Islamic banks ‘liquidities in light of Basell  3 requirements .So that the study investigate three variables which include Islamic securitization as independent variable; net cash from financing activities and net noncore funding dependence ratio as dependent variables .The study follows quantitative method by employing cross sectional data context analysis. The data is collected from six banks over six countries through the period 2011---- 2013.   Pearson regression is used to measure causal relation between Sukuk and Net Stable Fund Ratio (NSFR, hence the model is developed to describe the relation. The study uses net noncore funding dependence ratio as (NSFR which was required by Basel 3 .The regression result finds that there is positive relation between Sukuk and NSFR for Islamic banks .Also the study uses loans / deposits ratio to discover the relation between Sukuk and Islamic banks ‘liquidity risk so the regression test shows that there is positive relation between Sukuk and loans / deposit ratio.

Regulatory pressure and income smoothing by banks in response to anticipated changes to the Basel II Accord

Directory of Open Access Journals (Sweden)

Chu Yeong Lim

2017-03-01

Full Text Available We examine the effects of the revised Basel II rules on bank managers’ discretionary behavior, specifically income smoothing and loan loss provisioning. As the revised rules exert greater regulatory pressure on corporate than retail banking, we predict corporate bank managers to reduce risk-taking activities or increase income smoothing. Analysis of segmental reports reveals greater (less income smoothing in the corporate banking segments of low-capital (high-capital banks during the Basel II period, with their managers recognizing loan loss provisions in a less timely fashion. We find no such effects for retail banking. Although we document an initially negative market reaction to the regulatory announcements, that reaction weakens over time. Overall, the study highlights the unintended consequences of the banking rule changes.

Regulatory pressure and income smoothing by banks in response to anticipated changes to the Basel Ⅱ Accordq

Institute of Scientific and Technical Information of China (English)

Chu Yeong Lim; Kevin Ow Yong

2017-01-01

We examine the effects of the revised Basel II rules on bank managers’ discretionary behavior, specifically income smoothing and loan loss provisioning. As the revised rules exert greater regulatory pressure on corporate than retail banking, we predict corporate bank managers to reduce risk-taking activities or increase income smoothing. Analysis of segmental reports reveals greater(less) income smoothing in the corporate banking segments of low-capital(high-capital) banks during the Basel II period, with their managers recognizing loan loss provisions in a less timely fashion. We find no such effects for retail banking. Although we document an initially negative market reaction to the regulatory announcements, that reaction weakens over time. Overall,the study highlights the unintended consequences of the banking rule changes.

Verification of the fulfilment of the purposes of Basel II, Pillar 3 through application of the web log mining methods

Directory of Open Access Journals (Sweden)

M. Munk

2012-01-01

Full Text Available The objective of the paper is the verification of the fulfilment of the purposes of Basel II, Pillar 3 – market discipline during the recent financial crisis. The objective of the paper is to describe the current state of the working out of the project that is focused on the analysis of the market participants’ interest in mandatory disclosure of financial information by a commercial bank by means of advanced methods of web log mining. The output of the realized project will be the verification of the assumptions related to the purposes of Basel III by means of the web mining methods, the recommendations for possible reduction of mandatory disclosure of information under Basel II and III, the proposal of the methodology for data preparation for web log mining in this application domain and the generalised procedure for users’ behaviour modelling dependent on time. The schedule of the project has been divided into three phases. The paper deals with its first phase that is focusing on the data pre-processing, analysis and evaluation of the required information under Basel II, Pillar 3 since 2008 and its disclosure into the web site of a commercial bank. The authors introduce the methodologies for data preparation and known heuristic methods for path completion into web log files with respect to the particularity of investigated application domain. They propose scientific methods for modelling users’ behaviour of the webpages related to Pillar 3 with respect to time.

Hydrogen Reduction of Hematite Ore Fines to Magnetite Ore Fines at Low Temperatures

Directory of Open Access Journals (Sweden)

Wenguang Du

2017-01-01

Full Text Available Surplus coke oven gases (COGs and low grade hematite ores are abundant in Shanxi, China. Our group proposes a new process that could simultaneously enrich CH4 from COG and produce separated magnetite from low grade hematite. In this work, low-temperature hydrogen reduction of hematite ore fines was performed in a fixed-bed reactor with a stirring apparatus, and a laboratory Davis magnetic tube was used for the magnetic separation of the resulting magnetite ore fines. The properties of the raw hematite ore, reduced products, and magnetic concentrate were analyzed and characterized by a chemical analysis method, X-ray diffraction, optical microscopy, and scanning electron microscopy. The experimental results indicated that, at temperatures lower than 400°C, the rate of reduction of the hematite ore fines was controlled by the interfacial reaction on the core surface. However, at temperatures higher than 450°C, the reaction was controlled by product layer diffusion. With increasing reduction temperature, the average utilization of hydrogen initially increased and tended to a constant value thereafter. The conversion of Fe2O3 in the hematite ore played an important role in the total iron recovery and grade of the concentrate. The grade of the concentrate decreased, whereas the total iron recovery increased with the increasing Fe2O3 conversion.

76 FR 37620 - Risk-Based Capital Standards: Advanced Capital Adequacy Framework-Basel II; Establishment of a...

Science.gov (United States)

2011-06-28

... advanced approaches rules, several commenters, mostly representing the largest U.S. financial institutions... principles for preparing financial statements instead of the statutory accounting principles applicable to...-Based Capital Standards: Advanced Capital Adequacy Framework--Basel II; Establishment of a Risk-Based...

Development of High Sensitivity Nuclear Emulsion and Fine Grained Emulsion

Science.gov (United States)

Kawahara, H.; Asada, T.; Naka, T.; Naganawa, N.; Kuwabara, K.; Nakamura, M.

2014-08-01

Nuclear emulsion is a particle detector having high spacial resolution and angular resolution. It became useful for large statistics experiment thanks to the development of automatic scanning system. In 2010, a facility for emulsion production was introduced and R&D of nuclear emulsion began at Nagoya university. In this paper, we present results of development of the high sensitivity emulsion and fine grained emulsion for dark matter search experiment. Improvement of sensitivity is achieved by raising density of silver halide crystals and doping well-adjusted amount of chemicals. Production of fine grained emulsion was difficult because of unexpected crystal condensation. By mixing polyvinyl alcohol (PVA) to gelatin as a binder, we succeeded in making a stable fine grained emulsion.

Chemicals manufacture via biotechnology - the prospects for western Europe

Energy Technology Data Exchange (ETDEWEB)

Lewis, C.; Kristiansen, B.

1985-09-02

The trend of European chemical and biotechnological companies to move away from low value, high volume bulk chemicals towards the manufacture of high value, low volume, fine and speciality chemicals will continue into the 21st century. The manufacture of fine chemicals (principally antibiotics, biopesticides, enzymes and organic acids) and commodity chemicals (principally butanol and industrial ethanol) necessitates 1.5Mt and 2-3 Mt of carbohydrate feedstocks for their production. Thus it is vital that the Common Agricultural Policy does not interfere with the progress of the biotechnology industry by maintaining carbohydrate feedstock prices at their present high levels.

Chemical Composition and Emission Sources of the Fine Particulate Matters in a Southeast Asian Mega City (Dhaka, Bangladesh)

Science.gov (United States)

Salam, Abdus

2016-04-01

Air pollution has significant impact on human health, climate change, agriculture, visibility reduction, and also on the atmospheric chemistry. There are many studies already reported about the direct relation of the human mortality and morbidity with the increase of the atmospheric particulate matters. Especially, fine particulate matters can easily enter into the human respiratory system and causes many diseases. Particulate matters have the properties to absorb the solar radiation and impact on the climate. Dhaka, Bangladesh is a densely populated mega-city in the world. About 16 million inhabitants are living within an area of 360 square kilometers. Air quality situation has been degrading due to unplanned growth, increasing vehicles, severe traffic jams, brick kilns, industries, construction, and also transboundary air pollution. A rapidly growing number of vehicles has worsen the air quality in spite of major policy interventions, e.g., ban of two-stroke and three-wheeled vehicles, phase out of 20 years old vehicles, conversion to compressed natural gas (CNGs), etc. Introduction of CNGs to reduce air pollution was not the solution for fine particles at all, as evidence shows that CNGs and diesel engines are the major sources of fine particles. High concentration of the air pollutants in Dhaka city such as PM, carbonaceous species (black and organic carbon), CO, etc. has already been reported. PM2.5 mass, chemical composition (e.g., BC, OC, SO42-, NO3-, trace elements, etc.), aerosol Optical Depth (AOD) and emission sources of our recent measurements at the highly polluted south East Asian Mega city (Dhaka) Bangladesh will be presented in the conference. PM2.5 samples were collected on filters with Digital PM2.5 sampler (Switzerland) and Air photon, USA. BC was measured from filters (with thermal and optical method) and also real time with an Aethalometer AE42 (Magee Scitific., USA). Water soluble ions were determined from filters with ion chromatogram. AOD

Development of High Sensitivity Nuclear Emulsion and Fine Grained Emulsion

International Nuclear Information System (INIS)

Kawahara, H.; Asada, T.; Naka, T.; Naganawa, N.; Kuwabara, K.; Nakamura, M.

2014-01-01

Nuclear emulsion is a particle detector having high spacial resolution and angular resolution. It became useful for large statistics experiment thanks to the development of automatic scanning system. In 2010, a facility for emulsion production was introduced and R and D of nuclear emulsion began at Nagoya university. In this paper, we present results of development of the high sensitivity emulsion and fine grained emulsion for dark matter search experiment. Improvement of sensitivity is achieved by raising density of silver halide crystals and doping well-adjusted amount of chemicals. Production of fine grained emulsion was difficult because of unexpected crystal condensation. By mixing polyvinyl alcohol (PVA) to gelatin as a binder, we succeeded in making a stable fine grained emulsion

Graphene directed architecture of fine engineered nanostructures with electrochemical applications

DEFF Research Database (Denmark)

Hou, Chengyi; Zhang, Minwei; Halder, Arnab

2017-01-01

, and polymers has led to the possibility to create new electroactive and multifunctional nanostructures, which can serve as promising material platforms for electrochemical purposes. However, the precise control and fine-tuning of material structures and properties are still challenging and in demand...... classified nanostructures, including metallic nanostructures, self-assembled organic and supramolecular structures, and fine engineered metal oxides. In these cases, graphene templates either sacrificed during templating synthesis or retained as support for final products. We also discuss remained challenges....... In this review, we aim to highlight some recent efforts devoted to rational design, assembly and fine engineering of electrochemically active nanostructures using graphene or/and its derivatives as soft templates for controlled synthesis and directed growth. We organize the contents according to the chemically...

Basel II and lending to SMEs : what lies ahead? / Ingrid Ulst, Rain Raa

Index Scriptorium Estoniae

Ulst, Ingrid, 1977-

2003-01-01

Väike- ja keskmise suurusega ettevõtted moodustavad olulise osa Euroopa riikide majanduskeskkondadest, mistõttu on tähelepanu all nende asutamise, toetamise ja krediteerimise küsimused. Autor selgitab väikeettevõttele esitatavaid nõudeid Euroopa Komisjoni ja Euroopa Investeerimisfondi poolt. Ülevaade Baseli Komitee soovituslikest reeglitest (Basel Capital Accord II) väikeettevõtete krediidiriski mõõtmiseks ning mõjudest Euroopa Liidu liikmesriikide ja liituvate riikide pankade laenutegevusele väikeettevõtete finantseerimisel. Tabel. Skeemid

Adaptation of Basel Agreements to the Currency Risks Management in Ukraine and Russia

Directory of Open Access Journals (Sweden)

Ekaterina Tikhonovna Sveshnikova

2015-12-01

Full Text Available The article reveals the problem of adapting the Basel standards for managing the market and, in particular, foreign exchange risks to the conditions of the national economies of Ukraine and Russia. Internationality, fictitiousness and speculating of the currency transactions necessitated the transition of national banking systems of Ukraine and Russia to the international standards of Basel Committee. The article describes the history and shows the gradual process of implementation of these standards in the banking law and practice. We have studied the nature of the categories of “market risk” and “foreign exchange risk”. The place of the foreign exchange risk is updated in the classification of banking risks by analyzing the different views, and the mechanism of its effect is identified on the activities of commercial banks. The proposals on copyright issues are presented in particular: the necessity of combining the stock, interest rate and foreign exchange risks in the market risk group, as well as fixing the common regulatory definition of foreign exchange risk in the legislation. In the article the author’s category definition interpretation of “foreign exchange risk management system” is given in the light of its absence in the legal and the economic literature. The author also gives the recommendations to banks on developing the individual models for risk management in accordance with their own needs and current circumstances.

Analýza bankovej regulácie Basel III vo vzťahu k bankovému sektoru v krajinách EÚ

OpenAIRE

Mitrik, Lukáš

2017-01-01

This bachelor thesis describes the topic of banking regulation with emphasis on the most recent regulatory standard Basel 3. Planned outcome of this thesis is identification and evaluation of impact on European banking sector and also specifically on sectors of Czech Republic and Slovakia. The first thoretical part of this work simply explains basic principles and knowledge of overall regulation, organizational structure of European regulatory framework, shortcomings of Basel 2 and main focus...

Transport-related measures to mitigate climate change in Basel, Switzerland

DEFF Research Database (Denmark)

Perez, L.; Trüeb, S.; Cowie, H.

2015-01-01

for the year 2020 based on several locally relevant transport scenarios including all decided transport policies up to 2020, additional realistic and hypothesized traffic reductions, as well as ambitious diffusion levels of electric cars. The scenarios were compared to the reference condition in 2010 assumed......: Under the scenario that assumed a strict particle emissions standard in diesel cars and all planned transport measures, 3% of premature deaths could be prevented from projected PM2.5 exposure reduction. A traffic reduction scenario assuming more active trips provided only minor added health...... benefits for any of the changes in exposure considered. A hypothetical strong support to electric vehicles diffusion would have the largest health effectiveness given that the energy production in Basel comes from renewable sources. Conclusion: The planned local transport related GHG emission reduction...

HIGH-QUALITY ORNAMENTAL FINE CONCRETES MODIFIED BY NANOPARTICLES OF TITANIUM DIOXIDE

Directory of Open Access Journals (Sweden)

Bazhenov Yuriy Mikhaylovich

2012-10-01

Full Text Available Ultrasonic method of generation of a stable suspension of nano-particles of titanium dioxide and the strengthening properties of the ornamental fine concrete that contains cement binders with a nano-dispersed additive constitute the subject of the research covered by the authors. Nanoparticles react with the basic chemical elements that compose the concrete and act as crystallization centres. Therefore, the concrete porosity is reduced, while physical and technology-related properties of the ornamental fine concrete are improved. The authors have proven that the application of the nano-dispersed additive that contains titanium dioxide influences the processes of the structure formation in respect of fine ornamental concretes and improves the strength, as well as the water and cold resistance of fine concretes. The improvement is attributed to the dense concrete structure and strong adhesion between cement grains and between the cement and the aggregate. This conclusion is based on the data obtained through the employment of an electronic microscope used to identify the porosity of fine concretes.

Switzerland; Financial Sector Assessment Program: Factual Update: Basel Core Principles for Effective Banking Supervision

OpenAIRE

International Monetary Fund

2007-01-01

This technical note presents a factual update of the 2001 assessment of Switzerland’s compliance with the 1997 Basel Core Principles for Effective Banking Supervision (BCP), including a follow-up on implementation of the 2001 BCP assessment, undertaken in the context of the original Financial Sector Assessment Program in 2001. The note discusses that the Swiss Federal Banking Commission (SFBC) has made impressive progress both organizationally and to its supervisory practices to strengthen Sw...

Impact of Basel Accord on Banking System(Evidence from Islamic Banks of Pakistan)

OpenAIRE

Muhammad Mehtab Azeem; Akin Marsap; Cigdem Ozari

2015-01-01

Banks and bank regulatory authorities are vital players for the stability of economy and financial system in potential way. Basel III and its related to capital¡¯s requirement obligations have been effective useful tool for the banking system. Since, this is tough job for the bankers to maintain the liquidity for hedging the future risk but it also been expensive for bankers to keep the extra capital and become more liquid since this discourage the provision of loans but promote the credit ra...

Basel Regulations, Economic Capital and Their Implications for the Turkish Banking Industry = Basel Kuralları, Ekonomik Sermaye ve Bu Kavramların Türk Bankacılık Sektörü İçin İşaret Ettiği Hususlar

Directory of Open Access Journals (Sweden)

Göksel TİRYAKİ

2009-01-01

Full Text Available Capital is one of the crucial financial sources of fund for all economic agents. It is also a basic financial indicator that should be measured and managed, especially for banks. Basel Banking Committee has been publishing a number of standards for almost two decades in order to establish harmonized capital requirement for banks, which set basis for regulatory capital. On the other hand, economic capital, which is another concept in managing capital in banks, is a consequence of theoretical studies and risk management and capital requirement practices. It is defined as the optimum bank capital level measured by quantifying all relevant risks involved. In this paper, these capital regulations are explained and implications of Basel Rules and economic capital models for The Turkish Banking Industry are summarized.

Regole di Basilea e modelli di vigilanza: quale convergenza? (Basel rules and supervisory models: What convergence?

Directory of Open Access Journals (Sweden)

Elisabetta Montanaro

2013-12-01

Full Text Available The globalisation process that has interested the banking sector in the last decades was significantly fostered by the three founding pillars of the Basel framework: the home country control based on consolidated supervision, risk-sensitive prudential requirements, and the core principles for effective banking supervision. The present paper analyses whether the principle of the home country control is coherent with the large discretion with which national supervisors have implemented Basel’s prudential regulation. The complexity of global banks, too big to be supervised and resolved, inevitably generates regulatory coordination failures. The increasing mistrust of host countries in the ability and willingness of the home countries authorities to protect their national interests represents a serious threat to the sustainability of bank globalisation. An effective and binding convergence on the mechanisms and processes for managing and resolving the crises of cross-border banks seems destined to remain the unsolved problem of the Basel rules.  JEL Codes: G28, G01, G18, F33 

Split credit ratings and the prediction of bank ratings in the Basel II environment

OpenAIRE

Barton, Amanda

2006-01-01

This thesis investigates two aspects of credit risk measurement in the context of Basel 11: The International Convergence of Capital Measurement and Capital Standards. The first is the problem arising when two credit rating agencies disagree over the rating assigned to an issuer and a split rating arises. The second area is the determination of internal credit rating models for use under the Internal ratings-based approach. This thesis presents a variety of bank rating modes for individual an...

Ge and As x-ray absorption fine structure spectroscopic study of homopolar bonding, chemical order, and topology in Ge-As-S chalcogenide glasses

International Nuclear Information System (INIS)

Sen, S.; Ponader, C.W.; Aitken, B.G.

2001-01-01

The coordination environments of Ge and As atoms in Ge x As y S 1-x-y glasses with x:y=1:2, 1:1, and 2.5:1 and with wide-ranging S contents have been studied with Ge and As K-edge x-ray absorption fine structure spectroscopy. The coordination numbers of Ge and As atoms are found to be 4 and 3, respectively, in all glasses. The first coordination shells of Ge and As atoms in the stoichiometric and S-excess glasses consist of S atoms only, implying the preservation of chemical order at least over the length scale of the first coordination shell. As-As homopolar bonds are found to appear at low and intermediate levels of S deficiency, whereas Ge-Ge bonds are formed only in strongly S-deficient glasses indicating clustering of metal atoms and violation of chemical order in S-deficient glasses. The composition-dependent variation in chemical order in chalcogenide glasses has been hypothesized to result in topological changes in the intermediate-range structural units. The role of such topological transitions in controlling the structure-property relationships in chalcogenide glasses is discussed

Luna 24 regolith breccias: A possible source of the fine size material of the Luna 24 regolith

Science.gov (United States)

Rode, O. D.; Lindstrom, M. M.

1994-01-01

The regolith breccias from the Luna 24 core were analyzed. The Luna 24 regolith is a mixture of fine and coarse grain materials. The comparable analysis of the grain size distributions, the modal and chemical compositions of the breccias, and the regolith from the same levels show that the friable slightly litificated breccia with a friable fine grain matrix may be a source of fine grain material of the Luna 24 present day regolith.

Catalytic Conversion of Renewable Resources into Bulk and Fine Chemicals.

Science.gov (United States)

de Vries, Johannes G

2016-12-01

Several strategies can be chosen to convert renewable resources into chemicals. In this account, I exemplify the route that starts with so-called platform chemicals; these are relatively simple chemicals that can be produced in high yield, directly from renewable resources, either via fermentation or via chemical routes. They can be converted into the existing bulk chemicals in a very efficient manner using multistep catalytic conversions. Two examples are given of the conversion of sugars into nylon intermediates. 5-Hydroxymethylfurfural (HMF) can be prepared in good yield from fructose. Two hydrogenation steps convert HMF into 1,6-hexanediol. Oppenauer oxidation converts this product into caprolactone, which in the past, has been converted into caprolactam in a large-scale industrial process by reaction with ammonia. An even more interesting platform chemical is levulinic acid (LA), which can be obtained directly from lignocellulose in good yield by treatment with dilute sulfuric acid at 200°C. Hydrogenation converts LA into gamma-valerolactone, which is ring-opened and esterified in a gas-phase process to a mixture of isomeric methyl pentenoates in excellent selectivity. In a remarkable selective palladium-catalysed isomerising methoxycarbonylation, this mixture is converted in to dimethyl adipate, which is finally hydrolysed to adipic acid. Overall selectivities of both processes are extremely high. The conversion of lignin into chemicals is a much more complicated task in view of the complex nature of lignin. It was discovered that breakage of the most prevalent β-O-4 bond in lignin occurs not only via the well-documented C3 pathway, but also via a C2 pathway, leading to the formation of highly reactive phenylacetaldehydes. These compounds went largely unnoticed as they immediately recondense on lignin. We have now found that it is possible to prevent this by converting these aldehydes in a tandem reaction, as they are formed. For this purpose, we have used

One Decade of Induced Seismicity in Basel, Switzerland: A Consistent High-Resolution Catalog Obtained by Template Matching

Science.gov (United States)

Herrmann, M.; Kraft, T.; Tormann, T.; Scarabello, L.; Wiemer, S.

2017-12-01

Induced seismicity at the site of the Basel Enhanced Geothermal System (EGS) continuously decayed for six years after injection had been stopped in December 2006. Starting in May 2012, the Swiss Seismological Service was detecting a renewed increase of induced seismicity in the EGS reservoir to levels last seen in 2007 and reaching magnitudes up to ML2.0. Seismic monitoring at this EGS site is running for more than ten years now, but the details of the long-term behavior of its induced seismicity remained unexplored because a seismic event catalog that is consistent in detection sensitivity and magnitude estimation did not exist.We have created such a catalog by applying our matched filter detector to the 11-year-long seismic recordings of a borehole station at 2.7km depth. Based on 3'600 located earthquakes of the operator's borehole-network catalog, we selected about 2'500 reasonably dissimilar templates using waveform clustering. This large template set ensures an adequate coverage of the diversity of event waveforms which is due to the reservoir's highly complex fault system and the close observation distance. To cope with the increased computational demand of scanning 11-years of data with 2'500 templates, we parallelized our detector to run on a high-performance computer of the Swiss National Supercomputing Centre.We detect more than 200'000 events down to ML-2.5 during the six-day-long stimulation in December 2006 alone. Previously, only 13'000 detections found by an amplitude-threshold-based detector were known for this period. The high temporal and spatial resolution of this new catalog allows us to analyze the statistics of the induced Basel earthquakes in great detail. We resolve spatio-temporal variations of the seismicity parameters (a- and b-value) that have not been identified before and derive the first high-resolution temporal evolution of the seismic hazard for the Basel EGS reservoir.In summer 2017, our detector monitored the 10-week pressure

Bank Valuation and Its Connections with the Subprime Mortgage Crisis and Basel II Capital Accord

Directory of Open Access Journals (Sweden)

C. H. Fouche

2008-01-01

Full Text Available The ongoing subprime mortgage crisis (SMC and implementation of Basel II Capital Accord regulation have resulted in issues related to bank valuation and profitability becoming more topical. Profit is a major indicator of financial crises for households, companies, and financial institutions. An SMC-related example of this is the U.S. bank, Wachovia Corp., which reported major losses in the first quarter of 2007 and eventually was bought by Citigroup in September 2008. A first objective of this paper is to value a bank subject to Basel II based on premiums for market, credit, and operational risk. In this case, we investigate the discrete-time dynamics of banking assets, capital, and profit when loan losses and macroeconomic conditions are explicitly considered. These models enable us to formulate an optimal bank valuation problem subject to cash flow, loan demand, financing, and balance sheet constraints. The main achievement of this paper is bank value maximization via optimal choices of loan rate and supply which leads to maximal deposits, provisions for deposit withdrawals, and bank profitability. The aforementioned loan rates and capital provide connections with the SMC. Finally, OECD data confirms that loan loss provisioning and profitability are strongly correlated with the business cycle.

Occurrence of organic pollutants in recovered soil fines from construction and demolition waste.

Science.gov (United States)

Jang, Y C; Townsend, T G

2001-01-01

The objective of this study was to characterize recovered soil fines from construction and demolition (C&D) waste recycling facilities for trace organic pollutants. Over a period of 18 months, five sampling trips were made to 14 C&D waste recycling facilities in Florida. Screened soil fines were collected from older stockpiles and newly generated piles at the sites. The samples were analyzed for the total concentration (mg/kg) of a series of volatile organic compound (VOCs) and semi-volatile organic compounds (semi-VOCs). The synthetic precipitation leaching procedure (SPLP) test was also performed to evaluate the leachability of the trace organic chemicals. During the total analysis only a few volatile organic compounds were commonly found in the samples (trichlorofluoromethane, toluene, 4-isopropyltoluene, trimethylbenzene, xylenes, and methylene chloride). A total of nine VOCs were detected in the leaching test. Toluene showed the highest leachability among the compounds (61.3-92.0%), while trichlorofluoromethane, the most commonly detected compound from both the total and leaching tests, resulted in the lowest leachability (1.4-39.9%). For the semi-VOC analysis, three base-neutral semi-VOC compounds (bis(2-ethylhexyl)phthalate, butyl benzyl phthalate, and di-n-butyl phthalate) and several PAHs (acenaphthene, pyrene, fluoranthene, and phenanthrene) were commonly detected in C&D fines samples. These compounds also leached during the SPLP leaching test (0.1-25%). No acid extractable compounds, pesticides, or PCBs were detected. The results of this study were further investigated to assess risk from land applied recovered soil fines by comparing total and leaching concentrations of recovered soil fines samples to risk-based standards. The results of this indicate that the organic chemicals in recovered soil fines from C&D debris recycling facilities were not of a major concern in terms of human risk and leaching risk to groundwater under reuse and contact scenarios.

The modern alchemy: The chemical industry

International Nuclear Information System (INIS)

Valencia Giraldo, Asdrubal

2002-01-01

A brief history is presented on the development of chemistry from the antiquity, through alchemy, iatrochemistry, electrochemistry, atomic theory and the XVII, XVIII, XIX and X X centuries discoveries up to modern chemistry, fine chemistry, chemical engineering and the modern chemical industry with all of its consequences

The utilisation of fine sprays for Chemical, Biological, and Radiological or Nuclear (CBRN Decontamination

Directory of Open Access Journals (Sweden)

G Nasr

2016-04-01

Full Text Available The risk of exposure to hazardous materials, in many industrialenvironments and in everyday life due to the possibility of terrorist attacks,is widely recognised. It is therefore pertinent to have robustdecontamination equipment to limit the effects of hazardous materials andin turn protect human life and assets. This can be done by the applicationof neutralisation (coverage and rinsing techniques to the hazardousmaterials. The overall aim of this paper is to describe an investigationutilising fine sprays for coverage/deposition on the human body, inconjunction with standard safety showers for rinsing of a victim duringdecontamination of CBRN materials. As a novel feature miniature highpressure spill-return atomiser are used. It was found that fine spraysdecrease the consumption of decontamination liquid that is normally usedin practice which has many advantages in practice.

Influence of fining agents on glass melting: A review, Part 2

Czech Academy of Sciences Publication Activity Database

Hujová, Miroslava; Vernerová, Miroslava

2017-01-01

Roč. 61, č. 3 (2017), s. 202-208 ISSN 0862-5468 Institutional support: RVO:67985891 Keywords : glass melting * sodium sulphate * chemical reactions * gas evolution * dissolution * fining * bubble nucleation * foaming Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass OBOR OECD: Ceramics Impact factor: 0.439, year: 2016

Influence of fining agents on glass melting: A review, Part 1

Czech Academy of Sciences Publication Activity Database

Hujová, Miroslava; Vernerová, Miroslava

2017-01-01

Roč. 61, č. 2 (2017), s. 119-126 ISSN 0862-5468 Institutional support: RVO:67985891 Keywords : glass melting * sodium sulphate * chemical reactions * gas evolution * dissolution * fining * bubble nucleation * foaming Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass OBOR OECD: Ceramics Impact factor: 0.439, year: 2016

Determinants of SME credit worthiness under Basel rules: the value of credit history information

Directory of Open Access Journals (Sweden)

Francesco Dainelli

2013-03-01

Full Text Available The Basel III Accord has reportedly had an impact on SME financing. In this paper, we aim to highlight the determinants of SME credit worthiness. We use credit history in addition to financial ratios and “hybrid” indicators that have been built by mixing credit history with financial statement data. We develop a failure prediction logit model on 187 Italian SMEs. The use of short-term credit lines is the most important variable. Contrary to common understanding, capitalization levels do not affect ratings. Lastly, credit worthiness is sensitive to sale profitability.

The Basel Convention: effect on the Asian secondary lead industry

Science.gov (United States)

Elmer, J. W.

The Basel Convention has had a dramatic effect on the world trade in scrap materials. The scope of implementation is broader than was originally intended. This is due mainly to uncertainties created by a failure to distinguish between waste for disposal and waste destined for recycling. Spent lead/acid batteries and other lead scrap flows from OECD to non-OECD countries have been restricted to the point where secondary lead production is being affected. Export-import flows between OECD members have also changed as recycling is being contained within those countries. The economics of recycling in OECD countries may result in a smaller percentage of scrap being recycled. The established lead/acid battery industry in the Asian region, which relies heavily on imported scrap, will now be forced to import more finished metal, to maintain output. With strong economic growth forecast for the region, and no substitute for the lead-based battery, the supply situation is unlikely to ease.

Sahara Coal: the fine art of collecting fines for profit

Energy Technology Data Exchange (ETDEWEB)

Schreckengost, D.; Arnold, D.

1984-09-01

A considerable increase in the volume of fines in rom coal caused Sahara Coal in Illinois to redesign the fine coal system in their Harrisburg preparation plant. Details of the new design, and particularly the fine refuse system which dewaters and dries 28 mesh x O clean coal, are given. Results have exceeded expectations in reducing product losses, operating costs and slurry pond cleaning costs.

Growth of fine holes in polyethyleneterephthalate film irradiated by fission fragments

International Nuclear Information System (INIS)

Komaki, Y.; Tsujimura, S.

1975-01-01

Growth of fine holes by chemical etching in polyethyleneterephthalate films exposed to fission fragments were followed by measuring gas flow through films. The etching rate along tracks and the radial etching rate were determined at hole diameters of 100--3000 A and hole densities of 10 6 --10 8 /cm 2

The Physical and Chemical Properties of Fine Carbon Particles-Pinewood Resin Blends and Their Possible Utilization

Directory of Open Access Journals (Sweden)

Aviwe Melapi

2015-01-01

Full Text Available The application of biomass gasification technology is very important in the sense that it helps to relieve the dwindling supply of natural gas from fossil fuels, and the desired product of its gasification process is syngas. This syngas is a mixture of CO and H2; however, by-products such as char, tar, soot, ash, and condensates are also produced. This study, therefore, investigated selected by-products recovered from the gasification process of pinewood chips with specific reference to their potential application in other areas when used as blends. Three samples of the gasification by-products were obtained from a downdraft biomass gasifier system and were characterized in terms of chemical and physical properties. FTIR analysis confirmed similar spectra in all char-resin blends. For fine carbon particles- (soot- resin blends, almost the same functional groups as observed in char-resin blends appeared. In bomb calorimeter measurements, 70% resin/30% char blends gave highest calorific value, followed by 50% resin/50% soot blends with values of 35.23 MJ/kg and 34.75 MJ/kg consecutively. Provided these by-products meet certain criteria, they could be used in other areas such as varnishes, water purification, and wind turbine blades.

Chemical characteristics and source apportionment of fine particulate organic carbon in Hong Kong during high particulate matter episodes in winter 2003

Science.gov (United States)

Li, Yun-Chun; Yu, Jian Zhen; Ho, Steven Sai Hang; Schauer, James J.; Yuan, Zibing; Lau, Alexis K. H.; Louie, Peter K. K.

2013-02-01

PM2.5 samples were collected at six general stations and one roadside station in Hong Kong in two periods of high particulate matter (PM) in 2003 (27 October-4 November and 30 November-13 December). The highest PM2.5 reached 216 μg m- 3 during the first high PM period and 113 μg m- 3 during the second high PM period. Analysis of synoptic weather conditions identified individual sampling days under dominant influence of one of three types of air masses, that is, local, regional and long-range transported (LRT) air masses. Roadside samples were discussed separately due to heavy influences from vehicular emissions. This research examines source apportionment of fine organic carbon (OC) and contribution of secondary organic aerosol on high PM days under different synoptic conditions. Six primary OC (POC) sources (vehicle exhaust, biomass burning, cooking, cigarette smoke, vegetative detritus, and coal combustion) were identified on the basis of characteristic organic tracers. Individual POC source contributions were estimated using chemical mass balance model. In the roadside and the local samples, OC was dominated by the primary sources, accounting for more than 74% of OC. In the samples influenced by regional and LRT air masses, secondary OC (SOC), which was approximated to be the difference between the total measured OC and the apportioned POC, contributed more than 54% of fine OC. SOC was highly correlated with water-soluble organic carbon and sulfate, consistent with its secondary nature.

Deposition velocities to Sorbus aria, Acer campestre, Populus deltoides x trichocarpa 'Beaupre', Pinus nigra and x Cupressocyparis leylandii for coarse, fine and ultra-fine particles in the urban environment

International Nuclear Information System (INIS)

Freer-Smith, P.H.; Beckett, K.P.; Taylor, Gail

2005-01-01

Trees are effective in the capture of particles from urban air to the extent that they can significantly improve urban air quality. As a result of their aerodynamic properties conifers, with their smaller leaves and more complex shoot structures, have been shown to capture larger amounts of particle matter than broadleaved trees. This study focuses on the effects of particle size on the deposition velocity of particles (Vg) to five urban tree species (coniferous and broadleaved) measured at two field sites, one urban and polluted and a second more rural. The larger uptake to conifers is confirmed, and for broadleaves and conifers Vg values are shown to be greater for ultra-fine particles (Dp<1.0 μm) than for fine and coarse particles. This is important since finer particles are more likely to be deposited deep in the alveoli of the human lung causing adverse health effects. The finer particle fraction is also shown to be transported further from the emission source; in this study a busy urban road. In further sets of data the aqueous soluble and insoluble fractions of the ultra-fines were separated, indicating that aqueous insoluble particles made up only a small proportion of the ultra-fines. Much of the ultra-fine fraction is present as aerosol. Chemical analysis of the aqueous soluble fractions of coarse, fine and ultra-fine particles showed the importance of nitrates, chloride and phosphates in all three size categories at the polluted and more rural location

Comparison Of Liver Cell Models Using The Basel Phenotyping Cocktail

Directory of Open Access Journals (Sweden)

Benjamin Berger

2016-11-01

Full Text Available Currently used hepatocyte cell systems for in vitro assessment of drug metabolism include hepatoma cell lines and primary human hepatocyte (PHH cultures. We investigated the suit-ability of the validated in vivo Basel phenotyping cocktail (caffeine [CYP1A2], efavirenz [CYP2B6], losartan [CYP2C9], omeprazole [CYP2C19], metoprolol [CYP2D6], midazolam [CYP3A4] in vitro and characterized four hepatocyte cell systems (HepG2 cells, HepaRG cells, and primary cryopreserved human hepatocytes in 2-dimensional [2D] culture or in 3D-spheroid co-culture regarding basal metabolism and CYP inducibility. Under non-induced conditions, all CYP activities could be determined in 3D-PHH, CYP2B6, CYP2C19, CYP2D6 and CYP3A4 in 2D-PHH and HepaRG, and CYP2C19 and CYP3A4 in HepG2 cells. The highest non-induced CYP activities were observed in 3D-PHH and HepaRG cells. mRNA expression was at least 4-fold higher for all CYPs in 3D-PHH compared to the other cell systems. After treatment with 20µM rifampicin, mRNA increased 3 to 50-fold for all CYPs except CYP1A2 and 2D6 for HepaRG and 3D-PHH, 4-fold (CYP2B6 and 17-fold (CYP3A4 for 2D-PHH and 4-fold (CYP3A4 for HepG2. In 3D-PHH at least a 2-fold in-crease in CYP activity was observed for all inducible CYP isoforms while CYP1A2 and CYP2C9 activity did not increase in 2D-PHH and HepaRG. CYP inducibility assessed in vivo using the same phenotyping probes was also best reflected by the 3D-PHH model.Our studies show that 3D-PHH and (with some limitations HepaRG are suitable cell systems for assessing drug metabolism and CYP induction in vitro. HepG2 cells are less suited to as-sess CYP induction of the 2C and 3A family. The Basel phenotyping cocktail is suitable for the assessment of CYP activity and induction also in vitro.

The influence of clay fineness upon sludge recycling in a ceramic matrix

Science.gov (United States)

Szőke, A. M.; Muntean, M.; Sándor, M.; Brotea, L.

2016-04-01

The feasibility of sludge recycling in the ceramic manufacture was evaluated through laboratory testing. Such residues have similar chemical and mineralogical composition with the raw mixture of the green ceramic body used in construction. Several ceramic masses with clay and various proportion of sludge have been synthesized and then characterized by their physical-mechanical properties. The fineness of the clay, the main component of the green ceramic body, has been considered for every raw mixture. The proportion of the sludge waste addition depends on the clay fineness and the sintering capacity also, increases with the clay fineness. The ceramic properties, particularly, the open porosity, and mechanical properties, in presence of small sludge proportion (7, 20%) shows small modification. The introduction of such waste into building ceramic matrix (bricks, tiles, and plates) has a very good perspective.

Mathematical modeling of atmospheric fine particle-associated primary organic compound concentrations

Science.gov (United States)

Rogge, Wolfgang F.; Hildemann, Lynn M.; Mazurek, Monica A.; Cass, Glen R.; Simoneit, Bernd R. T.

1996-08-01

An atmospheric transport model has been used to explore the relationship between source emissions and ambient air quality for individual particle phase organic compounds present in primary aerosol source emissions. An inventory of fine particulate organic compound emissions was assembled for the Los Angeles area in the year 1982. Sources characterized included noncatalyst- and catalyst-equipped autos, diesel trucks, paved road dust, tire wear, brake lining dust, meat cooking operations, industrial oil-fired boilers, roofing tar pots, natural gas combustion in residential homes, cigarette smoke, fireplaces burning oak and pine wood, and plant leaf abrasion products. These primary fine particle source emissions were supplied to a computer-based model that simulates atmospheric transport, dispersion, and dry deposition based on the time series of hourly wind observations and mixing depths. Monthly average fine particle organic compound concentrations that would prevail if the primary organic aerosol were transported without chemical reaction were computed for more than 100 organic compounds within an 80 km × 80 km modeling area centered over Los Angeles. The monthly average compound concentrations predicted by the transport model were compared to atmospheric measurements made at monitoring sites within the study area during 1982. The predicted seasonal variation and absolute values of the concentrations of the more stable compounds are found to be in reasonable agreement with the ambient observations. While model predictions for the higher molecular weight polycyclic aromatic hydrocarbons (PAH) are in agreement with ambient observations, lower molecular weight PAH show much higher predicted than measured atmospheric concentrations in the particle phase, indicating atmospheric decay by chemical reactions or evaporation from the particle phase. The atmospheric concentrations of dicarboxylic acids and aromatic polycarboxylic acids greatly exceed the contributions that

Analysis of ancient fine white porcelains by SRXRF and preliminary study of the discriminating criteria

International Nuclear Information System (INIS)

Feng Xiangqian; Feng Songlin; Xu Qing; Zhang Ying; Lei Yong; Fan Dongyu; Cheng Lin; Huang Yuying; He Wei

2002-01-01

30 Samples were chosen from the fine white porcelain shards excavated in Xing, Xing and Jingxing kilns of Hebei province. Their bodies and glaze were analyzed for 19 elements by SRXRF, followed by the cluster analysis and principal factor analysis. The statistical results show that porcelains of each kiln are classified as one class according to their elemental composition. It indicates that provenance of the fine white porcelains may be identified based on their chemical components

Local Fine Structural Insight into Mechanism of Electrochemical Passivation of Titanium.

Science.gov (United States)

Wang, Lu; Yu, Hongying; Wang, Ke; Xu, Haisong; Wang, Shaoyang; Sun, Dongbai

2016-07-20

Electrochemically formed passive film on titanium in 1.0 M H2SO4 solution and its thickness, composition, chemical state, and local fine structure are examined by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure. AES analysis reveals that the thickness and composition of oxide film are proportional to the reciprocal of current density in potentiodynamic polarization. XPS depth profiles of the chemical states of titanium exhibit the coexistence of various valences cations in the surface. Quantitative X-ray absorption near edge structure analysis of the local electronic structure of the topmost surface (∼5.0 nm) shows that the ratio of [TiO2]/[Ti2O3] is consistent with that of passivation/dissolution of electrochemical activity. Theoretical calculation and analysis of extended X-ray absorption fine structure spectra at Ti K-edge indicate that both the structures of passivation and dissolution are distorted caused by the appearance of two different sites of Ti-O and Ti-Ti. And the bound water in the topmost surface plays a vital role in structural disorder confirmed by XPS. Overall, the increase of average Ti-O coordination causes the electrochemical passivation, and the dissolution is due to the decrease of average Ti-Ti coordination. The structural variations of passivation in coordination number and interatomic distance are in good agreement with the prediction of point defect model.

Charge neutrality of fine particle (dusty) plasmas and fine particle cloud under gravity

Energy Technology Data Exchange (ETDEWEB)

Totsuji, Hiroo, E-mail: totsuji-09@t.okadai.jp

2017-03-11

The enhancement of the charge neutrality due to the existence of fine particles is shown to occur generally under microgravity and in one-dimensional structures under gravity. As an application of the latter, the size and position of fine particle clouds relative to surrounding plasmas are determined under gravity. - Highlights: • In fine particle (dusty) plasmas, the charge neutrality is much enhanced by the existence of fine particles. • The enhancement of charge neutrality generally occurs under microgravity and gravity. • Structure of fine particle clouds under gravity is determined by applying the enhanced charge neutrality.

Autonomous patterning of cells on microstructured fine particles

International Nuclear Information System (INIS)

Takeda, Iwori; Kawanabe, Masato; Kaneko, Arata

2015-01-01

Regularly patterned cells can clarify cellular function and are required in some biochip applications. This study examines cell patterning along microstructures and the effect of microstructural geometry on selective cellular adhesion. Particles can be autonomously assembled on a soda-lime glass substrate that is chemically patterned by immersion in a suspension of fine particles. By adopting various sizes of fine particles, we can control the geometry of the microstructure. Cells adhere more readily to microstructured fine particles than to flat glass substrate. Silica particles hexagonally packed in 5–40 μm line and space microstructures provide an effective cell scaffold on the glass substrate. Cultured cells tend to attach and proliferate along the microstructured region while avoiding the flat region. The difference in cell adhesion is attributed to their geometries, as both of the silica particles and soda-lime glass are hydrophilic related with cell adhesiveness. After cell seeding, cells adhered to the flat region migrated toward the microstructured region. For most of the cells to assemble on the scaffold, the scaffolding microstructures must be spaced by at most 65 μm. - Highlights: • PS and SiO 2 particles provide effective scaffolds for cells. • Cells that adhere to microstructured particles successfully proliferate and differentiate. • Selective adhesion and growth along the scaffold can be achieved by patterning the fine particle microstructure. • Cells adhered to flat regions migrate toward microstructured regions. • Selective adhesion by cells depends on the microstructural geometry; specifically, on the inter-line spacing

Asymmetric Procyclicality of Chinese Banking and the Countercyclical Buffer of Basel III

Directory of Open Access Journals (Sweden)

Yufeng Li

2015-01-01

Full Text Available Since the global financial crisis of 2007-2008, the importance of the procyclicality in the banking sector has been highlighted. One of the Basel III objectives is to promote countercyclical buffers and reduce procyclicality. We apply time-varying copula combined with GARCH model to test the existence of asymmetric procyclicality of Chinese banking. The results show that the procyclicality of Chinese banking is asymmetric, where the dependence between loan and economy growth is more correlated during the decline stage than the rise stage of economy. Based on this asymmetry, we suggest that the authority can use high frequent index for signalling the start point of releasing countercyclical buffer and accelerate the releasing pace to avoid the supply of credit being constrained by regulatory capital requirements in downturns.

Get out of Fines Free: Recruiting Student Usability Testers via Fine Waivers

Science.gov (United States)

Hockenberry, Benjamin; Blackburn, Kourtney

2016-01-01

St. John Fisher College's Lavery Library's Access Services and Systems departments began a pilot project in which students with overdue fines tested usability of library Web sites in exchange for fine waivers. Circulation staff promoted the program and redeemed fine waiver vouchers at the Checkout Desk, while Systems staff administered testing and…

Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System

Directory of Open Access Journals (Sweden)

R. Ahmadi

2016-01-01

Full Text Available Micro fine sized palm oil fuel ash (POFA is a new supplementary cementitious material that can increase the strength, durability, and workability of concrete. However, production of this material incurs high cost and is not practical for the construction industry. This paper investigates a simple methodology of producing micro fine sized POFA by means of a laboratory scale wind tunnel system. The raw POFA obtained from an oil palm factory is first calcined to remove carbon residue and then grinded in Los Angeles abrasion machine. The grinded POFA is then blown in the fabricated wind tunnel system for separation into different ranges of particle sizes. The physical, morphological, and chemical properties of the micro fine sized POFA were then investigated using Laser Particle Size Analyser (PSA, nitrogen sorption, and Scanning Electron Microscopy with Energy Dispersive X-Ray (SEM-EDX. A total of 32.1% micro fine sized POFA were collected from each sample blown, with the size range of 1–10 micrometers. The devised laboratory scale of wind tunnel production system is successful in producing micro fine sized POFA and, with modifications, this system is envisaged applicable to be used to commercialize micro fine sized POFA production for the construction industry.

Chemical characterization and sources of personal exposure to fine particulate matter in the general population of Guangzhou, China

Science.gov (United States)

Chen, Xiao-Cui; Jahn, Heiko J.; Engling, Guenter; Ward, Tony J.; Kraemer, Alexander; Ho, Kin-Fai; Hung-Lam Yim, Steve; Chan, Chuen-Yu

2017-04-01

Fine particulate matter pollution severely deteriorates the environmental conditions and negatively impacts human health in the Chinese megacity Guangzhou. Concurrent ambient and personal measurements of fine particulate matter (PM2.5) were conducted in Guangzhou, China. Personal-to-ambient (P-C) relationships of PM2.5 chemical components were determined and sources of personal PM2.5 exposure were evaluated using principal component analysis along with a mixed-effects model. Water-soluble inorganic ions (mainly secondary inorganic ions) and anhydrosugars exhibited median personal-to-ambient (P/C) ratios < 1 accompanied by strong P-C correlations, indicating that these constituents in personal PM2.5 were significantly affected by ambient sources. Conversely, elemental carbon (EC) and calcium (Ca2+) showed median P/C ratios greater than unity, which indicated that among subjects who spent a great amount of time indoors, aside from particles of ambient origin, individual's total exposure to PM2.5 includes contributions of non-ambient exposure while indoors and outdoors (e.g., local traffic, indoor sources, personal activities). SO42- displayed very low coefficient of divergence (COD) values coupled with strong P-C correlations, implying a uniform distribution of SO42- in the urban area of Guangzhou. EC, Ca2+, and levoglucosan were otherwise heterogeneously distributed across individuals in different districts. Regional air pollution (50.4 ± 0.9%), traffic-related particles (8.6 ± 0.7%), dust-related particles (5.8 ± 0.7%), and biomass burning emissions (2.0 ± 0.2%) were moderate to high positive sources of personal PM2.5 exposure in Guangzhou. The observed positive and significant contribution of Ca2+ to personal PM2.5 exposure, highlighting indoor sources and/or personal activities, were driving factors determining personal exposure to dust-related particles. Considerable discrepancies (COD values ranging from 0.42 to 0.50) were shown between ambient

Anne Fine

Directory of Open Access Journals (Sweden)

Philip Gaydon

2015-04-01

Full Text Available An interview with Anne Fine with an introduction and aside on the role of children’s literature in our lives and development, and our adult perceptions of the suitability of childhood reading material. Since graduating from Warwick in 1968 with a BA in Politics and History, Anne Fine has written over fifty books for children and eight for adults, won the Carnegie Medal twice (for Goggle-Eyes in 1989 and Flour Babies in 1992, been a highly commended runner-up three times (for Bill’s New Frock in 1989, The Tulip Touch in 1996, and Up on Cloud Nine in 2002, been shortlisted for the Hans Christian Andersen Award (the highest recognition available to a writer or illustrator of children’s books, 1998, undertaken the positon of Children’s Laureate (2001-2003, and been awarded an OBE for her services to literature (2003. Warwick presented Fine with an Honorary Doctorate in 2005. Philip Gaydon’s interview with Anne Fine was recorded as part of the ‘Voices of the University’ oral history project, co-ordinated by Warwick’s Institute of Advanced Study.

某精细化工企业清洁生产审核实践研究%Cleaner Production Audit on A Fine Chemical Company

Institute of Scientific and Technical Information of China (English)

冯俊丽; 张时佳

2016-01-01

This paper takes the cleaner production of a company as example to expound the necessity and practical signifi-cance of carrying out cleaner production audit in fine chemical industry. According to eight existing issues of this company, the study provides practical low and high cost clean production project, totally 28 items. After calculating the economic, environmen-tal and social benefit of each project,the practical values of cleaner production audit to a company were pointed out, giving direc-tion of energy-saving emission reduction and low carbon development. This audit discusses the specific practice of cleaner pro-duction in fine chemical industry and it has guiding significance of practicing cleaner production in this domain.%以某企业的清洁生产审核为例,阐述分析精细化工行业开展清洁生产审核的必要性及实践意义.针对该企业存在的八方面问题,提出切实可行的无低费及中高费清洁生产方案共计28项,经核算各方案的经济、环境、社会效益,指出企业开展清洁生产审核的实际价值,为企业节能减排、低碳发展指明方向.本次审核初步探讨了清洁生产在精细化工行业的具体实践,对该行业清洁生产的践行具有一定的指导意义.

Performance comparison of sand and fine sawdust vermifilters in treating concentrated grey water for urban poor.

Science.gov (United States)

Adugna, Amare T; Andrianisa, Harinaivo A; Konate, Yacouba; Ndiaye, Awa; Maiga, Amadou H

2015-01-01

A comparative investigation was conducted for 10 months with sand and fine sawdust vermifilters and a control unit to treat concentrated grey water generated from a poor urban household in Ouagadougou, Burkina Faso. Each of the filters was made up of cylindrical DN200-PVC pipes and filled with 10 cm of gravel at the bottom. On top of the gravel layer, filter 1 (fully sand, F1) was completed with 40 cm of sand and 10 cm of fine sawdust, filter 2 (partially sand, F2) with 20 cm of sand and 30 cm of fine sawdust, respectively, and filter 3 (fully sawdust, F3) and 4 (control, F4) with 50 cm of fine sawdust only. Two hundred Eudrilus eugeniae earthworms were inoculated in each of the vermifilters. The vermifiltration system was supplied with grey water four times per day at a hydraulic loading rate of 64 L/m(2)/day on a batch basis. The removal efficiencies of biological oxygen demand, total chemical oxygen demand, and dissolved chemical oxygen demand (dCOD) by the vermifilters were 25-30% higher than the control, but little differences were observed in terms of total suspended solids and coliform removal efficiencies. Though there was no significant difference in the performance of the three vermifilters (p > 0.05), except for dCOD removal efficiency, the lifespan of F2 and F3 was longer than that of F1. Therefore, fine sawdust can substitute sand as a filter medium in vermifilters.

The XRD Amorphous Component in John Klein Drill Fines at Yellowknife Bay, Gale Crater, Mars

Science.gov (United States)

Morris, Richard V.; Ming,, Douglas W.; Blake, David; Vaniman, David; Bish, David L; Chipera, Steve; Downs, Robert; Morrison, Shaunna; Gellert, Ralf; Campbell, Iain;

Altered growth and fine root chemistry of Betula papyrifera and Acer saccharum under elevated CO2

International Nuclear Information System (INIS)

Parsons, W. F. J.; Kopper, B. J.; Lindroth, R. L.

2003-01-01

The effects of carbon dioxide enrichment on fine root chemical composition of two tree species common to northern hardwood forests was investigated. Results showed no change in the root/shoot ratios and fine root percentages in either birch or maple samples as a result of enriched carbon dioxide. Tissue nitrogen concentrations decreased in the fine roots, and consequently, carbon/nitrogen ratios increased with elevated carbon dioxide. In birch only, condensed tannins increased with carbon dioxide enrichment; in maple, neither complex tannins nor hydrosable tannins appear to have been influenced by elevated carbon dioxide. It is suspected that the responses of the tree saplings to elevated carbon dioxide may be related to their successional status. 37 refs., 2 tabs

Personal exposures to NO2 in the EXPOLIS-study: relation to residential indoor, outdoor and workplace concentrations in Basel, Helsinki and Prague

International Nuclear Information System (INIS)

Kousa, A.; Rotko, T.; Alm, S.; Monn, C.

2001-01-01

Personal exposures, residential indoor, outdoor and workplace levels of nitrogen dioxide (NO 2 ) were measured for 262 urban adult (25-55 years) participants in three EXPOLIS centres (Basel, Switzerland; Helsinki, Finland; and Prague, Czech Republic) using passive samplers for 48-h sampling periods during 1996-1997. The average residential outdoor and indoor NO 2 levels were lowest in Helsinki (24 ± 12 and 18 ± 11 μgm -3 , respectively), highest in Prague (61 ± 20 and 43 ± 23μgm -3 ), with Basel in between (36 ± 13 and 27± 13μgm -3 ). Average workplace NO 2 levels, however, were highest in Basel (36 ± 24μgm -3 ), lowest in Helsinki (27 ± 15μgm -3 ), with Prague in between (30 ± 18μgm -3 ). A time-weighted microenvironmental exposure model explained 74% of the personal exposure variation in all centre and in average 88% of the exposures. Log-linear regression models, using residential outdoor measurements (fixed site monitoring) combined with residential and work characteristics (i.e. work location, using gas appliances and keeping windows open), explained 48% (37%) of the personal NO 2 exposure variation. Regression models based on ambient fixed site concentrations alone explained only 11-19% of personal NO 2 exposure variation. Thus, ambient fixed site monitoring alone was a poor predictor for personal NO 2 exposure variation, but adding personal questionnaire information can significantly improve the predicting power. (Author)

Seismic wave attenuation from borehole and surface records in the top 2.5 km beneath the city of Basel, Switzerland

KAUST Repository

Bethmann, Falko; Deichmann, Nicholas; Mai, Paul Martin

2012-01-01

We investigate attenuation (Q−1) of sediments of 2.5–3.5km thickness underneath the city of Basel, Switzerland. We use recordings of 195 induced events that were obtained during and after the stimulation of a reservoir for a Deep Heat Mining Project

Modifying the properties of finely ground limestone by tumbling granulation

Science.gov (United States)

Macho, Oliver; Eckert, Maroš; Tomášová, Barbora; Peciar, Peter; Ščasný, Martin; Fekete, Roman; Peciar, Marián

2016-06-01

Calcium carbonate in the form of finely ground limestone is a material that has found its application in a wide range of industries, in the chemical, rubber, agricultural, and paper industries, is used for desulfurization of boilers and other. In civil engineering, ground limestone is used for the production of building materials, plaster and mortar mixtures, as a filler in concrete mixtures, in road construction, and as an essential component of mastic asphalt. This paper deals with examining the modification of the properties of finely ground limestone by the tumbling agglomeration method. It has been shown that the components of concrete with a round grain have a positive effect on the pumping of concrete in comparison with an elongated grain or the rough surface of crushed stone. The experiments will be carried out on a granulation plate using a variety of granulation liquid. The agglomerates and their properties were compared with untreated finely ground limestone, with a focus on detecting changes in compressibility, density and particle size. The output of this paper is a description and graphical representation of the changes in the properties of ground limestone before and after the agglomeration process.

Modifying the properties of finely ground limestone by tumbling granulation

Directory of Open Access Journals (Sweden)

Macho Oliver

2016-06-01

Full Text Available Calcium carbonate in the form of finely ground limestone is a material that has found its application in a wide range of industries, in the chemical, rubber, agricultural, and paper industries, is used for desulfurization of boilers and other. In civil engineering, ground limestone is used for the production of building materials, plaster and mortar mixtures, as a filler in concrete mixtures, in road construction, and as an essential component of mastic asphalt. This paper deals with examining the modification of the properties of finely ground limestone by the tumbling agglomeration method. It has been shown that the components of concrete with a round grain have a positive effect on the pumping of concrete in comparison with an elongated grain or the rough surface of crushed stone. The experiments will be carried out on a granulation plate using a variety of granulation liquid. The agglomerates and their properties were compared with untreated finely ground limestone, with a focus on detecting changes in compressibility, density and particle size. The output of this paper is a description and graphical representation of the changes in the properties of ground limestone before and after the agglomeration process.

Source areas and chemical composition of fine particulate matter in the Pearl River Delta region of China

Science.gov (United States)

Hagler, G. S. W.; Bergin, M. H.; Salmon, L. G.; Yu, J. Z.; Wan, E. C. H.; Zheng, M.; Zeng, L. M.; Kiang, C. S.; Zhang, Y. H.; Lau, A. K. H.; Schauer, J. J.

Fine particulate matter (PM 2.5) was measured for 4 months during 2002-2003 at seven sites located in the rapidly developing Pearl River Delta region of China, an area encompassing the major cities of Hong Kong, Shenzhen and Guangzhou. The 4-month average fine particulate matter concentration ranged from 37 to 71 μg m -3 in Guangdong province and from 29 to 34 μg m -3 in Hong Kong. Main constituents of fine particulate mass were organic compounds (24-35% by mass) and sulfate (21-32%). With sampling sites strategically located to monitor the regional air shed patterns and urban areas, specific source-related fine particulate species (sulfate, organic mass, elemental carbon, potassium and lead) and daily surface winds were analyzed to estimate influential source locations. The impact of transport was investigated by categorizing 13 (of 20 total) sampling days by prevailing wind direction (southerly, northerly or low wind-speed mixed flow). The vicinity of Guangzhou is determined to be a major source area influencing regional concentrations of PM 2.5, with levels observed to increase by 18-34 μg m -3 (accounting for 46-56% of resulting particulate levels) at sites immediately downwind of Guangzhou. The area near Guangzhou is also observed to heavily impact downwind concentrations of lead. Potassium levels, related to biomass burning, appear to be controlled by sources in the northern part of the Pearl River Delta, near rural Conghua and urban Guangzhou. Guangzhou appears to contribute 5-6 μg m -3 of sulfate to downwind locations. Guangzhou also stands out as a significant regional source of organic mass (OM), adding 8.5-14.5 μg m -3 to downwind concentrations. Elemental carbon is observed to be strongly influenced by local sources, with highest levels found in urban regions. In addition, it appears that sources outside of the Pearl River Delta contribute a significant fraction of overall fine particulate matter in Hong Kong and Guangdong province. This is evident

Levels, chemical composition and sources of fine aerosol particles (PM1) in an area of the Mediterranean basin

International Nuclear Information System (INIS)

Caggiano, Rosa; Macchiato, Maria; Trippetta, Serena

2010-01-01

Daily samples of fine aerosol particles (i.e., PM1, aerosol particles with an aerodynamic diameter less than 1.0 μm) were collected in Tito Scalo - Southern Italy - from April 2006 to March 2007. Measurements were performed by means of a low-volume gravimetric sampler, and each PM1 sample was analyzed by means of Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) or Atomic Absorption Spectrometry (GFAAS and FAAS) techniques in order to determine its content in fourteen trace elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Ti and Zn). During the period examined, PM1 daily concentrations ranged between 0.3 μg m -3 and 55 μg m -3 with a mean value of 8 μg m -3 , a standard deviation of 7 μg m -3 and a median value of 6 μg m -3 . As far as PM1 chemical composition is concerned, the mean values of the trace element concentrations decreased in the following order: Ca > Fe > Al > Na > K > Cr > Mg > Pb > Ni ∼ Ti ∼ Zn > Cd ∼ Cu > Mn. Principal Component Analysis (PCA) allowed the identification of three probable PM1 sources: industrial emissions, traffic and re-suspension of soil dust. Moreover, the results of a procedure applied to study the potential long-range transport contribution to PM1 chemical composition, showed that trace element concentrations do not seem to be affected by air mass origin and path. This was probably due to the strong impact of the local emission sources and the lack of the concentration measurements of some important elements and compounds that could better reveal the long-range transport influence on PM1 measurements at ground level.

Levels, chemical composition and sources of fine aerosol particles (PM1) in an area of the Mediterranean basin.

Science.gov (United States)

Caggiano, Rosa; Macchiato, Maria; Trippetta, Serena

2010-01-15

Daily samples of fine aerosol particles (i.e., PM1, aerosol particles with an aerodynamic diameter less than 1.0mum) were collected in Tito Scalo - Southern Italy - from April 2006 to March 2007. Measurements were performed by means of a low-volume gravimetric sampler, and each PM1 sample was analyzed by means of Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) or Atomic Absorption Spectrometry (GFAAS and FAAS) techniques in order to determine its content in fourteen trace elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Ti and Zn). During the period examined, PM1 daily concentrations ranged between 0.3microgm(-3) and 55microgm(-3) with a mean value of 8 microg m(-3), a standard deviation of 7microgm(-3) and a median value of 6microgm(-3). As far as PM1 chemical composition is concerned, the mean values of the trace element concentrations decreased in the following order: Ca>Fe>Al>Na>K>Cr>Mg>Pb>Ni approximately Ti approximately Zn>Cd approximately Cu>Mn. Principal Component Analysis (PCA) allowed the identification of three probable PM1 sources: industrial emissions, traffic and re-suspension of soil dust. Moreover, the results of a procedure applied to study the potential long-range transport contribution to PM1 chemical composition, showed that trace element concentrations do not seem to be affected by air mass origin and path. This was probably due to the strong impact of the local emission sources and the lack of the concentration measurements of some important elements and compounds that could better reveal the long-range transport influence on PM1 measurements at ground level. Copyright 2009 Elsevier B.V. All rights reserved.

Penetrating performance and “self-sharpening” behavior of fine-grained tungsten heavy alloy rod penetrators

Energy Technology Data Exchange (ETDEWEB)

Luo, Rongmei, E-mail: luorm_1999@126.com [School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu (China); College of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning (China); Huang, Dewu; Yang, Mingchuan; Tang, Enling; Wang, Meng; He, Liping [College of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning (China)

2016-10-15

Rod penetrators with 95W–3.75Ni–1.25Fe fine-grained tungsten heavy alloy (fine-grained 95W) and conventional tungsten heavy alloy rod penetrators with the same chemical composition (conventional 95W) were subjected to ballistic impact to compare their penetration performance. “Self-sharpening” behavior and an average 10.5% increase in penetration depth compared to conventional 95W penetrators. An acute head remained on the fine-grained 95W rod with SEM results revealing many micro-cracks and small debris on surface layer of the rod head. The stress-strain curves collected in the Split Hopkinson Pressure Bar (SHPB) experiment showed that critical failure strain values of the fine-grained 95W were 0.12 and 0.39 at strain rate of 2×10{sup 3} s{sup −1} and 3.9×10{sup 3} s{sup −1}, respectively, approximately 40% and 10% lower than those of the conventional 95W. The dynamic strength values of fine-grained 95W were 2100 MPa and 2520 MPa, respectively, which were 500 MPa and 520 MPa higher than those of the conventional 95W. The relationship among microstructure, mechanical property and “self-sharpening” behavior of fine-grained 95W is discussed in this work.

Evaluation of the Electricity Saving Fund in Basel, Switzerland

International Nuclear Information System (INIS)

Iten, R.; Vettori, A.; Schmidt, N.; Vaterlaus, S.; Wild, J.

2003-09-01

This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of an evaluation made concerning the Electricity Saving Fund operated in Basel, Switzerland. The aims of the fund, which is based on the imposition of a steering levy on electricity consumption, are presented and discussed. It is noted that the political policies behind this promotional scheme differ greatly from those of other Swiss Cantons. This study examines the direct and indirect effects of the steering levy and the resulting bonus for energy-saving consumers and takes a look at possibilities for transferring the idea to other Swiss Cantons. Questions asked include the degree to which the aims were fulfilled, were negative side-effects noted, is the implementation efficient, can the know-how gained be transferred to other communities and Cantons and which general experience was gained in the application of steering levies. Details on the implementation of the Electricity Saving Bonus are presented and discussed. Results of a survey on the perception of the scheme both in the commercial and private sectors are discussed. Also, the results of evaluations made concerning the degree to which the scheme's aims were fulfilled and their usefulness from the national economics point of view are discussed. Suggestions for improvements are presented. The report is concluded with an a selection of annexes on the topics dealt with in the report

Sources and geographical origins of fine aerosols in Paris (France)

International Nuclear Information System (INIS)

Bressi, M.; Nicolas, J.B.; Sciare, J.; Feron, A.; Nonnaire, N.; Petit, J.E.

2014-01-01

The present study aims at identifying and apportioning fine aerosols to their major sources in Paris (France) - the second most populated - larger urban zone - in Europe - and determining their geographical origins. It is based on the daily chemical composition of PM2.5 examined over 1 year at an urban background site of Paris (Bressi et al., 2013). Positive matrix factorization (EPA PMF3.0) was used to identify and apportion fine aerosols to their sources; bootstrapping was performed to determine the adequate number of PMF factors, and statistics (root mean square error, coefficient of determination, etc.) were examined to better model PM2.5 mass and chemical components. Potential source contribution function (PSCF) and conditional probability function (CPF) allowed the geographical origins of the sources to be assessed; special attention was paid to implement suitable weighting functions. Seven factors, namely ammonium sulfate (A.S.)-rich factor, ammonium nitrate (A.N.)-rich factor, heavy oil combustion, road traffic, biomass burning, marine aerosols and metal industry, were identified; a detailed discussion of their chemical characteristics is reported. They contribute 27, 24, 17, 14, 12, 6 and 1% of PM2.5 mass (14.7 μgm -3 ) respectively on the annual average; their seasonal variability is discussed. The A.S.- and A.N.-rich factors have undergone mid- or long-range transport from continental Europe; heavy oil combustion mainly stems from northern France and the English Channel, whereas road traffic and biomass burning are primarily locally emitted. Therefore, on average more than half of PM2.5 mass measured in the city of Paris is due to mid- or long-range transport of secondary aerosols stemming from continental Europe, whereas local sources only contribute a quarter of the annual averaged mass. These results imply that fine-aerosol abatement policies conducted at the local scale may not be sufficient to notably reduce PM2.5 levels at urban background sites

Chemical composition and source of fine and nanoparticles from recent direct injection gasoline passenger cars: Effects of fuel and ambient temperature

Science.gov (United States)

Fushimi, Akihiro; Kondo, Yoshinori; Kobayashi, Shinji; Fujitani, Yuji; Saitoh, Katsumi; Takami, Akinori; Tanabe, Kiyoshi

2016-01-01

Particle number, mass, and chemical compositions (i.e., elemental carbon (EC), organic carbon (OC), elements, ions, and organic species) of fine particles emitted from four of the recent direct injection spark ignition (DISI) gasoline passenger cars and a port fuel injection (PFI) gasoline passenger car were measured under Japanese official transient mode (JC08 mode). Total carbon (TC = EC + OC) dominated the particulate mass (90% on average). EC dominated the TC for both hot and cold start conditions. The EC/TC ratios were 0.72 for PFI and 0.88-1.0 (average = 0.92) for DISI vehicles. A size-resolved chemical analysis of a DISI car revealed that the major organic components were the C20-C28 hydrocarbons for both the accumulation-mode particles and nanoparticles. Contribution of engine oil was estimated to be 10-30% for organics and the sum of the measured elements. The remaining major fraction likely originated from gasoline fuel. Therefore, it is suggested that soot (EC) also mainly originated from the gasoline. In experiments using four fuels at three ambient temperatures, the emission factors of particulate mass were consistently higher with regular gasoline than with premium gasoline. This result suggest that the high content of less-volatile compounds in fuel increase particulate emissions. These results suggest that focusing on reducing fuel-derived EC in the production process of new cars would effectively reduce particulate emission from DISI cars.

Impact on air quality of measures to reduce CO2 emissions from road traffic in Basel, Rotterdam, Xi'an and Suzhou

NARCIS (Netherlands)

Keuken, M.P.; Jonkers, S.; Verhagen, H.L.M.; Perez, L.; Truëb, S.; Okkerse, W.J.; Liu, J.; Pan, X.C.; Zheng, L.; Wang, H.; Xu, R.; Sabel, C.E.

2014-01-01

Two traffic scenarios to reduce CO2 emissions from road traffic in two European cities (Basel and Rotterdam) and two Chinese cities (Xi'an and Suzhou) were evaluated in terms of their impact on air quality. The two scenarios, one modelling a reduction of private vehicle kilometres driven by 10% on

Prospects of implementation of "Basel III" international standards for domestic banks based on international experience

Directory of Open Access Journals (Sweden)

Baha Oksana

2016-04-01

Full Text Available This article summarizes the main requirements of the "Basel III" new standards in the context of banks capital regulation and identifies prospects for implementation of domestic banks based on analysis of international experience. The urgency of the problem is formulated in the need to restore the stability of the banking system of Ukraine with the new standards, which purpose is to increase the stability of banks and to protect the rights of financial services consumers. The main threats faced by the banking systems of developed countries and possible for the Ukrainian financial system were determined. The ways of achieving maximum benefits of new banking reform introduction were proposed.

Sahara Coal: the fine art of collecting fines for profit

Energy Technology Data Exchange (ETDEWEB)

Schreckengost, D.; Arnold, D.

1984-09-01

Because of a change in underground mining methods that caused a considerable increase in the amount of fine sizes in the raw coal, Sahara Coal Co. designed and constructed a unique and simple fine coal system at their Harrisburg, IL prep plant. Before the new system was built, the overload of the fine coal circuit created a cost crunch due to loss of salable coal to slurry ponds, slurry pond cleaning costs, and operating and maintenance costs--each and every one excessive. Motivated by these problems, Sahara designed a prototype system to dewater the minus 28 mesh refuse. The success of the idea permitted fine refuse to be loaded onto the coarse refuse belt. Sahara also realized a large reduction in pond cleaning costs. After a period of testing, an expanded version of the refuse system was installed to dewater and dry the 28 mesh X 0 clean coal. Clean coal output increased about 30 tph. Cost savings justified the expenditures for the refuse and clean coal systems. These benefits, combined with increased coal sales revenue, paid back the project costs in less than a year.

Flotation in column applied to fines of the Itataia phosphoro-uraniferous ore, CE, Brazil

International Nuclear Information System (INIS)

Furtado, J.R.V.; Peres, A.E.C.

1985-01-01

An adequate process to treat the fine fraction was developed in the present investigation, after size and chemical characterization of the fines,. Emphasis was placed on construction, assembling and operation of a 5.2 cm diameter and 6.0 m high continuos flotation column. The column was fed with the pilot plant desliming cyclone overflow, below 10 m. Tests were also carried out with the underflow of the same cyclone and with the very fine underflow of a 20 mm cyclone. The column presented a better performance than a rougher laboratory mechanical cell when tested with the underflow of 20 mm cyclone. Concentrates with 24.5% P 2 O 5 , with recovery levels above 60% were achieved from feed grades of 10.3%P 2 O 5 , it is worth mentioning that the rougher flotation reagents scheme is not effective to deppress carbonatic gangue irrespective of the size range. (Author) [pt

The Impact of the Basel III Liquidity Regulations on the Bank Lending Channel: A Luxembourg case study

OpenAIRE

Gaston Giordana; Ingmar Schumacher

2011-01-01

In this paper we study the impact of the Basel III liquidity regulations, namely the Liquidity Coverage Ratio (LCR) and the Net Stable Funding Ratio (NSFR), on the bank lending channel in Luxembourg. For this aim we built, based on individual bank data, time series of the LCR and NSFR for a sample of banks covering between 82% and 100% of total assets of the banking sector. Additionally, we simulated the optimal balance sheet adjustments needed to adhere to the regulations. We extend the exis...

Risk regulation in Islamic banking: Does Saudi Arabia need to adopt the risk regulation practices of Basel?

OpenAIRE

Sharbatly, A.

2016-01-01

Proponents of Islamic finance often argue that the success of Islamic banks in the UK and Malaysia during the 2007-8 Financial Crisis is proof of the proposition that all Islamic banks (IBs) are immune from sub-prime-mortgage type shocks. The implementation of Basel practices in Saudi Arabia will be very difficult and is likely through various challenges. However, it is arguable that such practices may bring about change in a substantial way in the UAE market. Thus, this thesis will discuss f...

Ultra fine particulates. Small particulates with large consequences?; Ultrafijn stof. Kleine deeltjes met grote gevolgen?

Energy Technology Data Exchange (ETDEWEB)

Hensema, A.; Keuken, M.; Kooter, I.; Verbeek, R.; Van Vugt, M. [TNO Science and Industry, Delft (Netherlands)

2009-02-15

The concentrations of ultra fine particles (and elementary carbon) have increased significantly near traffic routes. The amount of ultra fine particles (and the chemical composition of particulate matter) are related to traffic emissions and are therefore relevant to the established health effects. Better insight in the effectiveness of particulate matter policy requires more attention for ultra fine particles than just maintaining the standards for PM2,5 and PM10. [mk]. [Dutch] De concentraties van ultrafijne deeltjes (en elementair koolstof) zijn fors verhoogd in de buurt van verkeerswegen. Het aantal ultrafijne deeltjes (en de chemische samenstelling van fijnstof) gerelateerd aan verkeersemissies lijkt daarom relevant voor de vastgestelde gezondheidseffecten. Voor een beter inzicht in de effectiviteit van het fijnstofbeleid is meer aandacht nodig voor ultrafijne deeltjes dan alleen handhaving van de normen voor PM2,5 en PM10.

Integrated methods and scenario development for urban groundwater management and protection during tunnel road construction: a case study of urban hydrogeology in the city of Basel, Switzerland

Science.gov (United States)

Epting, J.; Huggenberger, P.; Rauber, M.

2008-05-01

In the northwestern area of Basel, Switzerland, a tunnel highway connects the French highway A35 (Mulhouse Basel) with the Swiss A2 (Basel Gotthard Milano). The subsurface highway construction was associated with significant impacts on the urban groundwater system. Parts of this area were formerly contaminated by industrial wastes, and groundwater resources are extensively used by industry. During some construction phases, considerable groundwater drawdown was necessary, leading to major changes in the groundwater flow regime. Sufficient groundwater supply for industrial users and possible groundwater pollution due to interactions with contaminated areas had to be taken into account. A groundwater management system is presented, comprising extensive groundwater monitoring, high-resolution numerical groundwater modeling, and the development and evaluation of different scenarios. This integrated approach facilitated the evaluation of the sum of impacts, and their interaction in time and space with changing hydrological boundary conditions. For all project phases, changes of the groundwater system had to be evaluated in terms of the various goals and requirements. Although the results of this study are case-specific, the overall conceptual approach and methodologies applied may be directly transferred to other urban areas.

Tools for chemical synthesis in microsystems

OpenAIRE

Jensen, Klavs F.; Newman, Stephen G.; Reizman, Brandon Jacob

2014-01-01

Chemical synthesis in microsystems has evolved from simple proof-of-principle examples to become a general technique in academia and industry. Numerous such “flow chemistry” applications are now found in pharmaceutical and fine chemical synthesis. Much of the development has been based on systems employing macroscopic flow components and tubes, rather than the integrated chip technology envisioned by the lab-on-a-chip community. We review the major developments in systems for flow chemistry a...

Acclimation of fine root respiration to soil warming involves starch deposition in very fine and fine roots: a case study in Fagus sylvatica saplings.

Science.gov (United States)

Di Iorio, Antonino; Giacomuzzi, Valentino; Chiatante, Donato

2016-03-01

Root activities in terms of respiration and non-structural carbohydrates (NSC) storage and mobilization have been suggested as major physiological roles in fine root lifespan. As more frequent heat waves and drought periods within the next decades are expected, to what extent does thermal acclimation in fine roots represent a mechanism to cope with such upcoming climatic conditions? In this study, the possible changes in very fine (diameter respiration rate and NSC [soluble sugars (SS) and starch] concentrations, were investigated on 2-year-old Fagus sylvatica saplings subjected to a simulated long-lasting heat wave event and to co-occurring soil drying. For both very fine and fine roots, soil temperature (ST) resulted inversely correlated with specific root length, respiration rates and SSs concentration, but directly correlated with root mass, root tissue density and starch concentration. In particular, starch concentration increased under 28 °C for successively decreasing under 21 °C ST. These findings showed that thermal acclimation in very fine and fine roots due to 24 days exposure to high ST (∼ 28 °C), induced starch accumulation. Such 'carbon-savings strategy' should bear the maintenance costs associated to the recovery process in case of restored favorable environmental conditions, such as those occurring at the end of a heat wave event. Drought condition seems to affect the fine root vitality much more under moderate than high temperature condition, making the temporary exposure to high ST less threatening to root vitality than expected. © 2015 Scandinavian Plant Physiology Society.

Novel silica stabilization method for the analysis of fine nanocrystals using coherent X-ray diffraction imaging

Energy Technology Data Exchange (ETDEWEB)

Monteforte, Marianne; Estandarte, Ana K.; Chen, Bo; Harder, Ross; Huang, Michael H.; Robinson, Ian K.

2016-06-23

High-energy X-ray Bragg coherent diffraction imaging (BCDI) is a well established synchrotron-based technique used to quantitatively reconstruct the three-dimensional morphology and strain distribution in nanocrystals. The BCDI technique has become a powerful analytical tool for quantitative investigations of nanocrystals, nanotubes, nanorods and more recently biological systems. BCDI has however typically failed for fine nanocrystals in sub-100?nm size regimes ? a size routinely achievable by chemical synthesis ? despite the spatial resolution of the BCDI technique being 20?30?nm. The limitations of this technique arise from the movement of nanocrystals under illumination by the highly coherent beam, which prevents full diffraction data sets from being acquired. A solution is provided here to overcome this problem and extend the size limit of the BCDI technique, through the design of a novel stabilization method by embedding the fine nanocrystals into a silica matrix. Chemically synthesized FePt nanocrystals of maximum dimension 20?nm and AuPd nanocrystals in the size range 60?65?nm were investigated with BCDI measurement at beamline 34-ID-C of the APS, Argonne National Laboratory. Novel experimental methodologies to elucidate the presence of strain in fine nanocrystals are a necessary pre-requisite in order to better understand strain profiles in engineered nanocrystals for novel device development.

Failures of fine tubes of steam generators and the essential defects

International Nuclear Information System (INIS)

Kawano, Shinji; Ebisawa, Toru; Sato, Susumu.

1976-01-01

Light water reactors were sold to Japan as their economy and safety have been established, but the average availability of 11 reactors in Japan during 7 year operation is only 53%, and it is being proved that there are questions in the safety and economy. In this report, the failures of fine tubes of steam generators are discussed from the standpoint of the corrosion of materials. First, the functions and construction of the fine tubes of steam generators in PWRs are explained. The failures of the fine tubes of steam generators became frequent since the beginning of 1970s as large capacity nuclear power stations have started the operation. When the fine tubes are pierced with holes during operation and the radioactivity in primary coolant leaks into secondary coolant, it is detected with radioactivity monitors. In order to find out the broken tubes, eddy current flaw detectors are used, and the tubes on which flaws were detected we plugged by explosion welding. In these works, many manual operations are included, and the radiation exposure of workers and the difficulties in the operations are the problems. The cases of the tube failures in Japan and foreign countries, the causes and the countermeasures are described. Chemical corrosion, thermal stress cycle, shaving off due to eddy flow, and stress corrosion are the probable causes. The safety of steam generators is essentially in extremely poor state. The seriousness of the tube failures in steam generators is emphasized. (Kako, I.)

The Impact of the Basel Accord on Greek Banks: A Stress Test Study

Directory of Open Access Journals (Sweden)

John Leventides

2015-03-01

Full Text Available In this paper, we study the impact of extreme events on the loan portfolios of the Greek banking system. These portfolios are grouped into three separate groups based on the size of the bank to which they belong, in particular, large, medium, and small size. A series of extreme scenarios was performed and the increase in capital requirements was calculated for each scenario based on the standardized and internal ratings approach of the Basel II accord. The results obtained show an increase of credit risk during the crisis periods, and the differentiation of risk depending on the size of the banking organization as well as the added capital that will be needed in order to hedge that risk. The execution of the scenarios aims at studying the effects which may be brought about on the capital of the three representative banks by the appearance of adverse events.

[Health evaluation of fine particulate matter in indoor air].

Science.gov (United States)

2008-11-01

When evaluating the health effects of indoor air fine particulate matter, the indoor dynamics as well as the physical, chemical and biological properties of fine particles have to be considered. The indoor air fraction PM2.5 largely stems from outdoor air. Accordingly, the German Working Group on Indoor Guideline Values of the Federal Environmental Agency and the States' Health Authorities also recommends WHO's (2006) 24-hour mean guideline value of 25 microg PM2,5 per cubic meter for indoor air evaluation. In contrast to PM2.5, coarse particles (PM10) in schools, kindergartens and dwellings show much higher indoor air concentrations. Additional sources indoors have to be assumed. Because of the different composition of indoor air compared to outdoor air and due to the lack of dose-response relationships of coarse particles in indoor air, the health effects of indoor air PM10 can not be evaluated yet. Sufficient and consistent ventilation is an indispensable basis to reduce PM concentrations in indoor spaces. Furthermore, known sources of PM indoors should be detected consequently and subsequently minimized.

Characterization of traffic-related ambient fine particulate matter (PM2.5) in an Asian city: Environmental and health implications

Science.gov (United States)

Zhang, Zhi-Hui; Khlystov, Andrey; Norford, Leslie K.; Tan, Zhen-Kang; Balasubramanian, Rajasekhar

2017-07-01

Vehicular traffic emission is an important source of particulate pollution in most urban areas. The detailed chemical speciation of traffic-related PM2.5 (fine particles) is relatively sparse in the literature, especially in Asian cities. To fill this knowledge gap, we carried out an intensive field study in Singapore from November 2015 to February 2016. PM2.5 samples were collected concurrently at a typical roadside microenvironment and at an urban background site. A detailed chemical speciation of PM2.5 samples was conducted to gain insights into the emission characteristics of traffic-related fine aerosols. Analyses of diagnostic ratios and molecular markers of selected chemical species were explored for source attribution of different classes of chemical constituents in traffic-related PM2.5. The human health risk due to inhalation of the particulate-bound PAHs (polycyclic aromatic hydrocarbons) and toxic trace elements was estimated for both adults and children. The overall results of the study indicate that gasoline-powered vehicles make a higher contribution to traffic-related fine aerosol components such as organic carbon (OC), particle-bound PAHs and particulate ammonium than that of diesel-powered vehicles. However, both types of vehicles contribute to traffic-related EC emissions significantly. The combustion of petroleum fuels and lubricating oil make significant contributions to the emission of n-alkanes and hopanes into the urban atmosphere, respectively. The study further reveals that some toxic trace elements are emitted from non-exhaust sources and that aromatic acids represent an important component of secondary organic aerosols. The emission of toxic trace elements from non-exhaust sources is of particular concern as they could pose a higher carcinogenic risk to both adults and children than other chemical species.

Growth of fine holes in polyethylenenaphthalate film irradiated by fission fragments

International Nuclear Information System (INIS)

Komaki, Y.; Tsujimura, S.

1976-01-01

Growth of fine holes by chemical etching in polyethylenenaphthalate films exposed to fission fragments were examined by measuring gas flow through the films. The etching rate along tracks, the radial etching rate, and the bulk etching rate were determined at effective hole diameters of 100 to 1000 A and hole densities of approximately 10 8 cm -2 . The effects of ethanol and surfactants on the etching rates were studied from the viewpoint of attaining less-tapered holes

Principles, techniques and recent advances in fine particle aggregation for solid-liquid separation

International Nuclear Information System (INIS)

Somasundaran, P.; Vasudevan, T.V.

1993-01-01

Waste water discharged from various chemical and nuclear processing operations contains dissolved metal species that are highly toxic and, in some cases, radioactive. When the waste is acidic in nature, neutralization using reagents such as lime is commonly practiced to reduce both the acidity and the amount of waste (Kuyucak et al.). The sludge that results from the neutralization process contains metal oxide or hydroxide precipitates that are colloidal in nature and is highly stable. Destabilization of colloidal suspensions can be achieved by aggregation of fines into larger sized agglomerates. Aggregation of fines is a complex phenomenon involving a multitude of forces that control the interparticle interaction. In order to understand the colloidal behavior of suspensions a fundamental knowledge of physicochemical properties that determine the various forces is essential. In this review, a discussion of basic principles governing the aggregation of colloidal fines, various ways in which interparticle forces can be manipulated to achieve the desired aggregation response and recent advances in experimental techniques to probe the interfacial characteristics that control the flocculation behavior are discussed

Evaluation of Basel III revision of quantitative standards for implementation of internal models for market risk

Directory of Open Access Journals (Sweden)

Meera Sharma

2012-12-01

Full Text Available This paper studies revisions under Basel III for market risk which allow conservative combination of short and long period Value-at-Risks (VaRs. This is the first study that examines this issue. The performance of the combination method is evaluated through regulatory back tests, unconditional and conditional coverage tests. The combination improves performance in regulatory back tests and tests of unconditional coverage. A common trend is the superior performance of long (1000/750 day in combination with short (190/125 days VaR methods. The combination does not enhance conditional coverage performance. This is the first study on this topic.

Basel II Sürecinde Kredi Derecelendirme ve Bir Tekstil İşletmesinde Uygulaması(Credit Rating in Process of Basel II and Application in The Textile Company

Directory of Open Access Journals (Sweden)

Nilgün KAYALI

2011-01-01

Full Text Available Small and medium scale entreprises (SMEs operating in the real sector and the credit relationships of these with the banks that offer them credits provide the backbone of a country’s economy. Starting from 1990 onwards, ss a result of the integration experienced in the international financing systems, it became compulsory to provide these services in compliance with the international standards. This requires distancing from traditional evaluation methods used in the crediting process and moving towards a more scientific, and internationally recognized credit rating systems. BASEL II Capital Accord that started being implemented in G-10 countries as of 2007, is planned to be implemented in other countries as well. Thus, in the calculation of credit risks there will be a more objective, understandable and easy to implement tool available. In case this is used by our banks, the SMEs fulfilling such requirements will be in a position to acquire low cost funds from financial and capital markets. When a macro perspective is brought to the topic, as a result of diminishement of high-risk investments, it will be possible to make an effective evaluation of the funds by the country economies.

CONTACT STRENGTH OF MECHANOACTIVATED FINE CONCRETES FROM GRANULATED BLAST-FURNACE SLAGS

Directory of Open Access Journals (Sweden)

V. I. Bolshakov

2014-10-01

rotary mixer-activator on the value of the contact strength of cement and aggregates got further development. Practical value. Strengthening of contact area of fine concrete in the exercise of the combined machining of all concrete mix components in the mixer-activator is achieved owing to increment of hydration degree of raw concrete components; creation of conditions for solid-phase chemical reactions between its components; structure improvement of the received material. It promotes significant increase of mechanical strength of mechanoactivated fine concretes (around 5 times in comparison with concretes, made from a non-activated mix, which makes it possible to decrease the cement consumption when manufacturing 1 m3 of concrete up to 59 %.

Religion, mission and national development: A contextual interpretation of Jeremiah 29:4-7 in the light of the activities of the Basel Mission Society in Ghana (1828-1918 and its missiological implications

Directory of Open Access Journals (Sweden)

Peter White

2015-03-01

Full Text Available We cannot realistically analyse national development without factoring religion into the analysis. In the same way, we cannot design any economic development plan without acknowledging the influence of religion on its implementation. The fact is that, many economic development policies require a change from old values, attitudes, beliefs and behaviour patterns of the citizenry to those that are supportive of the new policy. Christianity has become a potent social force in every facet of Ghanaian life, from family life, economic activities, occupation, and health to education. In the light of the essential role of religion in national development, this article discusses the role the Basel Mission Society played in the development of Ghana and its missiological implications. This article argues that the Basel Mission Society did not only present the gospel to the people of Ghana, they also practicalised the gospel by developing their converts spiritually, economically, and educationally. Through these acts of love by the Basel Mission Society, the spreading of the Gospel gathered momentum and advanced.Intradisciplinary and/or interdisciplinary implications: The article contributes to the interdisciplinary discourse on religion and development with specific reference to the role of the Basel Mission Society�s activities in Ghana (1828�1918. It provides missiological implications of their activities in the light of the broader Ecumenical discourses.

Bank Interest Margin and Default Risk under Basel III Capped Capital Adequacy Accord and Regulatory Deposit Insurance Fund Protection

OpenAIRE

Chuen-Ping Chang; Shi Chen

2015-01-01

We study the optimal bank interest margin and default risk under the capped ratio schedule of government capital instruments in the Basel III Capital Adequacy Accord and the Deposit Insurance Fund arrangement program. We show that an increase in the capped ratio (a decrease in the capped government capital injection) increases the default risk in the bank¡¯s equity return at a reduced interest margin. Regulatory deposit insurance fund protection reinforces the reduced bank interest margin and...

Chemical composition of wildland fire emissions

Science.gov (United States)

Shawn P. Urbanski; Wei Min Hao; Stephen Baker

2009-01-01

Wildland fires are major sources of trace gases and aerosol, and these emissions are believed to significantly influence the chemical composition of the atmosphere and the earth's climate system. The wide variety of pollutants released by wildland fire include greenhouse gases, photochemically reactive compounds, and fine and coarse particulate matter. Through...

The team behind HALO, a large-scale art installation conceived at CERN and inspired by ATLAS data, exhibited at 2018 Art Basel.

CERN Multimedia

Marcelloni, Claudia

2018-01-01

Merging particle physics and art, a CERN-inspired artwork is being featured for the first time at Art Basel, the international art fair in Basel, Switzerland from 13 to 17 June. A large-scale immersive art installation entitled HALO is the artistic interpretation of the Large Hadron Collider’s ATLAS experiment and celebrates the links between art, science and technology. Inspired by raw data generated by ATLAS, the artwork has been conceived and executed by CERN’s former artists-in-residence, the “Semiconductor” duo Ruth Jarman and Joe Gerhardt, in collaboration with Mónica Bello, curator and head of Arts at CERN. During their three-month Arts at CERN residency in 2015, Semiconductor had the chance to explore particle-collision data in collaboration with scientists from the University of Sussex ATLAS group and work with them on the data later used in the artwork. HALO is a cylindrical structure, measuring ten metres in diameter and surrounded by 4-metre-long vertical piano wires. On the inside, an en...

Physical, chemical and mineralogical characteristics of some selected gardud soils of kordofan region

International Nuclear Information System (INIS)

Elgubshawi, Abdelmoneim Ahmed Ismail

1995-05-01

Recently much of the attention is given to gardud soil as the main alternative for the depleted marginal sandy soils. A lack of exact knowledge regarding these soils are evident. For studying gardud soil four sites were chosen according to the annual rainfall. Two pits were excavated in each site to represent the concaved and convexed locations plus composite samples to cover the area between two pits. Morphological, physical, chemical and mineralogical investigations were made. The results showed that the gardud soils were relatively differed within and between sites due to the climate and the topography. The dominant clay minerals are kaolinite, montmorillonite and illte. The chemical and physical characteristics were poor. Some of the restrictions limiting the use of these soils such as erosion, hardness, fertility, stoniness, drought and acidity. According to the American system of soil classification, the soils studied were given the following classification: (1) Bardab soil: (A) Kanhablic rhodustalf-fine clay, kaolinite, isohyperthermic (concaved). (B) Kandic paleustalf-very fine clay, kaolinite, isohyperthermic (convexed). (2) Sodari: (A) Typic comborthid-coarse loamy, mixed hyperthermic (concave). (B) Typic comborthid-coarse loamy, mixed hyperthermic (convexed). (3) Nihud (Rahad Elsilk): (A) Rhodic paleustalf-fine loamy, kaolinite isohyperthermic (concaved). (B) Aridic paleustalf-fine loamy kaolinite isohyperthermic (convexed). (4) Umgamalla: (A) Ustic hapustalf-fine loamy kaolinite isohyperthermic (concaved). (B)Ustic hapustalf-fine loamy kaolinite isohyperthermic (convexed). (Author)

Physical, chemical and mineralogical characteristics of some selected gardud soils of kordofan region

Energy Technology Data Exchange (ETDEWEB)

Elgubshawi, Abdelmoneim Ahmed Ismail [Department of Biochemistry and Soil Science, Faculty of agriculture, University of Khartoum, Khartoum (Sudan)

1995-05-01

Recently much of the attention is given to gardud soil as the main alternative for the depleted marginal sandy soils. A lack of exact knowledge regarding these soils are evident. For studying gardud soil four sites were chosen according to the annual rainfall. Two pits were excavated in each site to represent the concaved and convexed locations plus composite samples to cover the area between two pits. Morphological, physical, chemical and mineralogical investigations were made. The results showed that the gardud soils were relatively differed within and between sites due to the climate and the topography. The dominant clay minerals are kaolinite, montmorillonite and illte. The chemical and physical characteristics were poor. Some of the restrictions limiting the use of these soils such as erosion, hardness, fertility, stoniness, drought and acidity. According to the American system of soil classification, the soils studied were given the following classification: (1) Bardab soil: (A) Kanhablic rhodustalf-fine clay, kaolinite, isohyperthermic (concaved). (B) Kandic paleustalf-very fine clay, kaolinite, isohyperthermic (convexed). (2) Sodari: (A) Typic comborthid-coarse loamy, mixed hyperthermic (concave). (B) Typic comborthid-coarse loamy, mixed hyperthermic (convexed). (3) Nihud (Rahad Elsilk): (A) Rhodic paleustalf-fine loamy, kaolinite isohyperthermic (concaved). (B) Aridic paleustalf-fine loamy kaolinite isohyperthermic (convexed). (4) Umgamalla: (A) Ustic hapustalf-fine loamy kaolinite isohyperthermic (concaved). (B)Ustic hapustalf-fine loamy kaolinite isohyperthermic (convexed). (Author) 39 refs. , 8 tabs. , 35 figs.

Fine structure of synapses on dendritic spines

Directory of Open Access Journals (Sweden)

Michael eFrotscher

2014-09-01

Full Text Available Camillo Golgi’s Reazione Nera led to the discovery of dendritic spines, small appendages originating from dendritic shafts. With the advent of electron microscopy (EM they were identified as sites of synaptic contact. Later it was found that changes in synaptic strength were associated with changes in the shape of dendritic spines. While live-cell imaging was advantageous in monitoring the time course of such changes in spine structure, EM is still the best method for the simultaneous visualization of all cellular components, including actual synaptic contacts, at high resolution. Immunogold labeling for EM reveals the precise localization of molecules in relation to synaptic structures. Previous EM studies of spines and synapses were performed in tissue subjected to aldehyde fixation and dehydration in ethanol, which is associated with protein denaturation and tissue shrinkage. It has remained an issue to what extent fine structural details are preserved when subjecting the tissue to these procedures. In the present review, we report recent studies on the fine structure of spines and synapses using high-pressure freezing (HPF, which avoids protein denaturation by aldehydes and results in an excellent preservation of ultrastructural detail. In these studies, HPF was used to monitor subtle fine-structural changes in spine shape associated with chemically induced long-term potentiation (cLTP at identified hippocampal mossy fiber synapses. Changes in spine shape result from reorganization of the actin cytoskeleton. We report that cLTP was associated with decreased immunogold labeling for phosphorylated cofilin (p-cofilin, an actin-depolymerizing protein. Phosphorylation of cofilin renders it unable to depolymerize F-actin, which stabilizes the actin cytoskeleton. Decreased levels of p-cofilin, in turn, suggest increased actin turnover, possibly underlying the changes in spine shape associated with cLTP. The findings reviewed here establish HPF as

On Basu's proposal: Fines affect bribes

OpenAIRE

Popov, Sergey V.

2017-01-01

I model the connection between the equilibrium bribe amount and the fines imposed on both bribe-taker and bribe-payer. I show that Basu's (2011) proposal to lower the fines imposed on bribe-payers in order to induce more whistleblowing and increase the probability of penalizing corrupt government officials might instead increase bribe amounts. Higher expected fines on bribe-takers will make them charge larger bribes; at the same time, lowering fines for bribe-paying might increase bribe-payer...

Basel III Global Liquidity Standards: Critical Discussion and Impact onto the European Banking Sector

Directory of Open Access Journals (Sweden)

Veronika Bučková

2011-09-01

Full Text Available Together with the Basel III regulatory equity rules, two liquidity ratios have been published. Resulting from the illiquidity of some banks during the financial crisis in 2008, these ratios shall help to prevent further crisis in the European banking sector. But do they really fulfill their aim? This article presents the new liquidity ratios, the actual liquidity situation in banks and describes the consequences for banks at a simplified example. It has to be stated that implementing more detailed liquidity frameworks into the banking supervision process is necessary. The financial crisis in 2008 showed that several banks did not have adequate liquidity risk models and processes to prevent illiquidity. But the LCR and the NSFR seem to be wrong methods. Both ratios will increase. The implementation of both ratios has to be done very carefully in order to prevent this.

Processed bottom ash for replacing fine aggregate in making high-volume fly ash concrete

Directory of Open Access Journals (Sweden)

Antoni

2017-01-01

Full Text Available Bottom ash is a coal plant by-product that is abundant and underutilized. There is the potential use of bottom ash as a fine aggregate replacement in concrete mixtures; however, the problems of water absorption and uniformity of quality of the material need to be overcome first. In this study, bottom ash was treated by sieve separation and pounding to smaller particle size for use as a sand substitute. The physical and chemical characteristics of bottom ash were tested after treatment including water absorption, sieve analysis, and fineness modulus. Highvolume fly ash (HVFA mortar specimens were made and the compressive strength and flowability test using bottom ash after treatment are compared with that of the sand specimen. Low water to cementitious ratio was used to ensure higher strength from the cementitious paste and superplasticizer demand was determined for each treatment. The result showed that bottom ash can be used as fine aggregate replacement material. Sieve separation of the bottom ash could produce 75% of the compressive strength compared with the control sand specimen, whereas pounded bottom ash could have up to 96% of the compressive strength of the control specimen. A 28-day compressive strength of 45 MPa was achievable with 100% replacement of fine aggregate with bottom ash.

Pelletisation Behavior of Fluxed Iron Ore Pellets of Varying Basicities Made with Waste Fines

Directory of Open Access Journals (Sweden)

Alok Sarkar

2013-10-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE The present study deals with the utilization of fines generated from comminution process (crushing, grinding and screening of the Run of Mines into value added products i.e. fluxed iron ore pellets. The study comprises to understand the physical and mechanical behavior of five distinguished chemical compositions of green and dried iron ore pellets with respect to a typical Mini Blast furnace (MBF burden data and furnace operating parameter. The maximum basicity of pellets was calculated 2.37 to make slag neutral when blast furnace runs at 100% high ash coke (avg. ash content= 29%. The crushing strength and drop number of various green pellets were measured. Green Crushing Strength was decreased with increasing lime fines. The addition of lime fines as a burnt lime, which has acicular structure creates less plasticity and brittle like fracture occurred. Due to formation of hard CaCO3 layer on the surface, after increasing lime contain crushing strength was increased in the air and oven dry pellets with respect to acid pellet (0% lime fines addition. [How to cite this article: Sarkar, A., Mandal, A.K., and Sinha, O.P. (2013 Pelletisation Behavior of Fluxed Iron Ore Pellets of Varying Basicities Made with Waste Fines. International Journal of Science and Engineering, 5(2,9-14. Doi: 10.12777/ijse.5.2.9-14] 

Complementary information on CdSe/ZnSe quantum dot local structure from extended X-ray absorption fine structure and diffraction anomalous fine structure measurements

International Nuclear Information System (INIS)

Piskorska-Hommel, E.; Holý, V.; Caha, O.; Wolska, A.; Gust, A.; Kruse, C.; Kröncke, H.; Falta, J.; Hommel, D.

2012-01-01

The extended X-ray absorption fine structure (EXAFS) and diffraction anomalous fine structure (DAFS) have been applied to investigate a local structure for the CdSe/ZnSe quantum dots grown by molecular beam epitaxy (MBE) and migration-enhanced epitaxy (MEE). The aim was to study the intermixing of Cd and Zn atoms, chemical compositions and strain induced by cap-layer. The EXAFS at the Cd K-edge and DAFS at the Se K-edge proved the intermixing of Cd and Zn atoms. The distances Cd–Se (2.61 Å) found from EXAFS and DAFS analysis for h 1 region is closer to that in bulk CdSe (2.62 Å). The DAFS analysis revealed the differences in the local structure in two investigated regions (i.e. different iso-strain volumes) on the quantum dots. It was found that the investigated areas differ in the Cd concentration. To explain the experimental results the theoretical calculation based on a full valence-force field (VFF) model was performed. The theoretical VFF model fully explains the experimental data.

The Fine Structure Constant

Indian Academy of Sciences (India)

IAS Admin

The article discusses the importance of the fine structure constant in quantum mechanics, along with the brief history of how it emerged. Al- though Sommerfelds idea of elliptical orbits has been replaced by wave mechanics, the fine struc- ture constant he introduced has remained as an important parameter in the field of ...

Occurrence of Somma-Vesuvio fine ashes in the tephrostratigraphic record of Panarea, Aeolian Islands

Science.gov (United States)

Donatella, De Rita; Daniela, Dolfi; Corrado, Cimarelli

2008-10-01

Ash-rich tephra layers interbedded in the pyroclastic successions of Panarea island (Aeolian archipelago, Southern Italy) have been analyzed and related to their original volcanic sources. One of these tephra layers is particularly important as it can be correlated by its chemical and morphoscopic characteristics to the explosive activity of Somma-Vesuvio. Correlation with the Pomici di Base eruption, that is considered one of the largest explosive events causing the demolition of the Somma stratovolcano, seems the most probable. The occurrence on Panarea island of fine ashes related to this eruption is of great importance for several reasons: 1) it allows to better constrain the time stratigraphy of the Panarea volcano; 2) it provides a useful tool for tephrochronological studies in southern Italy and finally 3) it allows to improve our knowledge on the distribution of the products of the Pomici di Base eruption giving new insights on the dispersion trajectories of fine ashes from plinian plumes. Other exotic tephra layers interbedded in the Panarea pyroclastic successions have also been found. Chemical and sedimentological characteristics of these layers allow their correlation with local vents from the Aeolian Islands thus constraining the late explosive activity of Panarea dome.

The Basel II Accord on Measuring and Managing a Bank's Risks

Directory of Open Access Journals (Sweden)

Ion Stancu

2007-11-01

Full Text Available The abundance of risk metrics stems from the effort to measure the difference between the expected and actual returns, under a hypothesis of normality. Under the assumption of risk aversion, investors are likely to quantify risk using metrics which measure returns lower than the expected average. These include the semi-variance of returns smaller than the average, the risk of loss – a return under a chosen level, usually 0%, and value-at-risk, for the greatest losses, with a probability of less than 1-5% in a given period of time. The Basel II accord improves on the way risks are measured, by allowing banks greater flexibility. There is an increase in the complexity of measuring credit risks, the market risks measurement methods remain the same, and the measurement of operational risk is introduced for the first time. The most advanced (and widely-used risk metrics are based on VaR. However, it must be noted that VaR calculations are statistical, and therefore unlikely to forecast extraordinary events. So the quality of a VaR calculation must be checked using back-testing, and if the VaR value fails in a percentage of 1-5% of the cases, then the premises of the model must be changed.

Impact of Poultry Litter Cake, Cleanout, and Bedding following Chemical Amendments on Soil C and N Mineralization

OpenAIRE

Watts, Dexter B.; Smith, Katy E.; Torbert, H. A.

2012-01-01

Poultry litter is a great alternative N source for crop production. However, recent poultry litter management changes, and increased chemical amendment use may impact its N availability. Thus, research was initiated to evaluate the effect that broiler cake and total cleanout litter amended with chemical additives have on C and N mineralization. A 35-day incubation study was carried out on a Hartsells fine sandy loam (fine-loamy, siliceous, subactive, thermic Typic Hapludults) soil common to t...

36 CFR 910.35 - Fine arts.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Fine arts. 910.35 Section 910... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.35 Fine arts. Fine arts... of art which are appropriate for the development. For information and guidance, a reasonable...

Enabling continuous-flow chemistry in microstructured devices for pharmaceutical and fine-chemical production.

Science.gov (United States)

Kockmann, Norbert; Gottsponer, Michael; Zimmermann, Bertin; Roberge, Dominique M

2008-01-01

Microstructured devices offer unique transport capabilities for rapid mixing, enhanced heat and mass transfer and can handle small amounts of dangerous or unstable materials. The integration of reaction kinetics into fluid dynamics and transport phenomena is essential for successful application from process design in laboratory to chemical production. Strategies to implement production campaigns up to tons of pharmaceutical chemicals are discussed, based on Lonza projects.

Considering Fine Art and Picture Books

Science.gov (United States)

Serafini, Frank

2015-01-01

There has been a close association between picturebook illustrations and works of fine art since the picturebook was first conceived, and many ways these associations among works of fine art and picturebook illustrations and design play out. To make sense of all the various ways picturebook illustrations are associated with works of fine art,…

Fine root dynamics for forests on contrasting soils in the Colombian Amazon

Directory of Open Access Journals (Sweden)

E. M. Jiménez

2009-12-01

Full Text Available It has been hypothesized that as soil fertility increases, the amount of carbon allocated to below-ground production (fine roots should decrease. To evaluate this hypothesis, we measured the standing crop fine root mass and the production of fine roots (<2 mm by two methods: (1 ingrowth cores and, (2 sequential soil coring, during 2.2 years in two lowland forests growing on different soils types in the Colombian Amazon. Differences of soil resources were defined by the type and physical and chemical properties of soil: a forest on clay loam soil (Endostagnic Plinthosol at the Amacayacu National Natural Park and, the other on white sand (Ortseinc Podzol at the Zafire Biological Station, located in the Forest Reservation of the Calderón River. We found that the standing crop fine root mass and the production was significantly different between soil depths (0–10 and 10–20 cm and also between forests. The loamy sand forest allocated more carbon to fine roots than the clay loam forest with the production in loamy sand forest twice (mean±standard error=2.98±0.36 and 3.33±0.69 Mg C ha⁻¹ yr⁻¹, method 1 and 2, respectively as much as for the more fertile loamy soil forest (1.51±0.14, method 1, and from 1.03±0.31 to 1.36±0.23 Mg C ha⁻¹ yr⁻¹, method 2. Similarly, the average of standing crop fine root mass was higher in the white-sands forest (10.94±0.33 Mg C ha⁻¹ as compared to the forest on the more fertile soil (from 3.04±0.15 to 3.64±0.18 Mg C ha⁻¹. The standing crop fine root mass also showed a temporal pattern related to rainfall, with the production of fine roots decreasing substantially in the dry period of the year 2005. These results suggest that soil resources may play an important role in patterns of carbon allocation to the production of fine roots in these forests as the proportion of carbon allocated to above- and below-ground organs is different

Chemical mass balance source apportionment of fine and PM10 in the Desert Southwest, USA

Directory of Open Access Journals (Sweden)

Andrea L. Clements

2016-03-01

Full Text Available The Desert Southwest Coarse Particulate Matter Study was undertaken in Pinal County, Arizona, to better understand the origin and impact of sources of fine and coarse particulate matter (PM in rural, arid regions of the U.S. southwestern desert. The desert southwest experiences some of the highest PM10 mass concentrations in the country. To augment previously reported results, 6-week aggregated organic speciation data that included ambient concentrations of n-alkanes, polycyclic aromatic hydrocarbons, organic acids, and saccharides were used in chemical mass balance modeling (CMB. A set of re-suspended soil samples were analyzed for specific marker species to provide locally-appropriate source profiles for the CMB analysis. These profiles, as well as previously collected plant and fungal spore profiles from the region, were combined with published source profiles for other relevant sources and used in the CMB analysis. The six new region-specific source profiles included both organic and inorganic species for four crustal material sources, one plant detritus source, and one fungal spore source.Results indicate that up to half of the ambient PM2.5 was apportioned to motor vehicles with the highest regional contribution observed in the small urban center of Casa Grande. Daily levels of apportioned crustal material accounted for up to 50% of PM2.5 mass with the highest contributions observed at the sites closest to active agricultural areas. Apportioned secondary PM, biomass burning, and road dust typically contributed less than 35% as a group to the apportioned PM2.5 mass. Crustal material was the primary source apportioned to PM10 and accounted for between 50–90% of the apportioned mass. Of the other sources apportioned to PM10, motor vehicles and road dust were the largest contributors at the urban and one of the rural sites, whereas road dust and meat cooking operations were the largest contributors at the other rural site.

Extrinsic lactose fines improve dry powder inhaler formulation performance of a cohesive batch of budesonide via agglomerate formation and consequential co-deposition.

Science.gov (United States)

Kinnunen, Hanne; Hebbink, Gerald; Peters, Harry; Huck, Deborah; Makein, Lisa; Price, Robert

2015-01-15

The aim of the study was to investigate how the fine particle content of lactose carriers prepared with different types of lactose fines regulates dry powder inhaler (DPI) formulation performance of a cohesive batch of micronised budesonide. Budesonide formulations (0.8 wt%) were prepared with three different lactose carriers (Lactohale (LH) LH100, 20 wt% LH210 in LH100 and 20 wt% LH300 in LH100). Fine particle fraction of emitted dose (FPFED) and mean mass aerodynamic diameter (MMAD) of budesonide was assessed with a Next Generation Impactor (NGI) using a Cyclohaler at 90 l/min. Morphological and chemical characteristics of particles deposited on Stage 2 were determined using a Malvern Morphologi G3-ID. The results indicate that increasing concentration of lactose fines (agglomerates. Presence of agglomerates on Stage 2 was confirmed by morphological analysis of particles. Raman analysis of material collected on Stage 2 indicated that the more fine lactose particles were available the more agglomerates of budesonide and lactose were delivered to Stage 2. These results suggest drug-fines agglomerate formation is an important mechanism for how lactose fines improve and regulate DPI formulation performance. Copyright © 2014 Elsevier B.V. All rights reserved.

Flocculation of Pyrite Fines in Aqueous Suspensions with Corn Starch to Eliminate Mechanical Entrainment in Flotation

Directory of Open Access Journals (Sweden)

Wei Ge

2015-10-01

Full Text Available The hydrophilic flocculation of pyrite fines in aqueous suspensions with corn starch was studied by measuring particle size distribution, microscopy observation and micro-flotation. Furthermore, the interaction of corn starch with pyrite was investigated by determining the adsorption density and based on zeta potential measurements and X-ray photoelectron spectrometer (XPS analysis in this work. The results of the particle size distribution measurement show that corn starch can effectively aggregate pyrite fines, and the pyrite floccules (flocs are sensitive to mechanical stirring. The micro-flotation results suggest that the mechanical entrainment of pyrite fines in flotation can be effectively eliminated through the formation of large-size flocs. The zeta potential of pyrite particles decreases with the addition of corn starch. The XPS results prove that carboxyl groups are generated on the digested corn starch, and both iron hydroxyl compounds and ferrous disulfide on the pyrite surface can chemically interact with the corn starch digested by sodium hydroxide.

REPLACEMENT OF SOFTWOOD KRAFT PULP WITH ECF-BLEACHED BAMBOO KRAFT PULP IN FINE PAPER

Directory of Open Access Journals (Sweden)

Guanglei Zhao

2010-06-01

Full Text Available Non-wood fibers such as bamboo and wheat straw have been playing important roles in the pulp and paper industry in China. In this study an ECF-bleached bamboo kraft pulp was compared with a bleached softwood kraft pulp (NBSK as the reinforcement pulp in fine paper production. Areas that were examined include the refining of pure fibers, influence of bamboo on dewatering, retention, and sizing. The influence of bamboo kraft pulp as a part of a furnish replacing NBSK was compared as well. Results show that fiber shortening was more prominent with bamboo when refined. This resulted in a higher amount of fines, and addition wet-end chemicals may be required to compensate. Handsheets with bamboo as a reinforcement fiber showed similar mechanical and optical properties to handsheets containing NBSK.

Transport of reservoir fines

DEFF Research Database (Denmark)

Yuan, Hao; Shapiro, Alexander; Stenby, Erling Halfdan

Modeling transport of reservoir fines is of great importance for evaluating the damage of production wells and infectivity decline. The conventional methodology accounts for neither the formation heterogeneity around the wells nor the reservoir fines’ heterogeneity. We have developed an integral...... dispersion equation in modeling the transport and the deposition of reservoir fines. It successfully predicts the unsymmetrical concentration profiles and the hyperexponential deposition in experiments....

Optimization principles for preparation methods and properties of fine ferrite materials

Science.gov (United States)

Borisova, N. M.; Golubenko, Z. V.; Kuz'micheva, T. G.; Ol'khovik, L. P.; Shabatin, V. P.

1992-08-01

The paper is devoted to the problems of development of fine materials based on Ba-ferrite for vertical magnetic recording in particular. Taking an analogue — BaFe 12-2 xCo xTe xO 19 — we have optimized the melt co-precipitation method and shown a new opportunity to provide chemical homogeneity of microcrystallites by means of cryotechnology. Magnetic characteristics of the magnetic tape experimental sample for digital video recording are presented. A series of principles of consistent control of ferrite powder properties are formulated and illustrated with specific developments.

Seasonal variation of fine- and coarse-mode nitrates and related aerosols over East Asia: synergetic observations and chemical transport model analysis

Science.gov (United States)

Uno, Itsushi; Osada, Kazuo; Yumimoto, Keiya; Wang, Zhe; Itahashi, Syuichi; Pan, Xiaole; Hara, Yukari; Kanaya, Yugo; Yamamoto, Shigekazu; Fairlie, Thomas Duncan

2017-11-01

We analyzed long-term fine- and coarse-mode synergetic observations of nitrate and related aerosols (SO42-, NO3-, NH4+, Na+, Ca2+) at Fukuoka (33.52° N, 130.47° E) from August 2014 to October 2015. A Goddard Earth Observing System chemical transport model (GEOS-Chem) including dust and sea salt acid uptake processes was used to assess the observed seasonal variation and the impact of long-range transport (LRT) from the Asian continent. For fine aerosols (fSO42-, fNO3-, and fNH4+), numerical results explained the seasonal changes, and a sensitivity analysis excluding Japanese domestic emissions clarified the LRT fraction at Fukuoka (85 % for fSO42-, 47 % for fNO3-, 73 % for fNH4+). Observational data confirmed that coarse NO3- (cNO3-) made up the largest proportion (i.e., 40-55 %) of the total nitrate (defined as the sum of fNO3-, cNO3-, and HNO3) during the winter, while HNO3 gas constituted approximately 40 % of the total nitrate in summer and fNO3- peaked during the winter. Large-scale dust-nitrate (mainly cNO3-) outflow from China to Fukuoka was confirmed during all dust events that occurred between January and June. The modeled cNO3- was in good agreement with observations between July and November (mainly coming from sea salt NO3-). During the winter, however, the model underestimated cNO3- levels compared to the observed levels. The reason for this underestimation was examined statistically using multiple regression analysis (MRA). We used cNa+, nss-cCa2+, and cNH4+ as independent variables to describe the observed cNO3- levels; these variables were considered representative of sea salt cNO3-, dust cNO3-, and cNO3- accompanied by cNH4+), respectively. The MRA results explained the observed seasonal changes in dust cNO3- and indicated that the dust-acid uptake scheme reproduced the observed dust-nitrate levels even in winter. The annual average contributions of each component were 43 % (sea salt cNO3-), 19 % (dust cNO3-), and 38 % (cNH4+ term). The MRA dust

selectivity engineering in sustainable production of chemicals, fuels ...

Indian Academy of Sciences (India)

admin

Cost. Landfill. –400. Source: Tuck et al., Science, 337 (6095): 695-699 10 August ... libraries for novel enzymes that transform lignocellulosics ... Bio-process engineering for optimal production of ... fine chemicals and petrochemical industries. ..... Mole ratio : Epichlorohydrin to acetone of 1:8 , 100 % atom economy. Sr.No.

Reduced in vitro toxicity of fine particulate matter collected during the 2008 Summer Olympic Games in Beijing: the roles of chemical and biological components.

Science.gov (United States)

Shang, Yu; Zhu, Tong; Lenz, Anke-Gabriele; Frankenberger, Birgit; Tian, Feng; Chen, Chenyong; Stoeger, Tobias

2013-10-01

Beijing has implemented systematic air pollution control legislation to reduce particulate emissions and improve air quality during the 2008 Summer Olympics, but whether the toxicity of fine fraction of particles (PM(2.5)) would be changed remains unclear. In present study we compared in vitro biological responses of PM(2.5) collected before and during the Olympics and tried to reveal possible correlations between its chemical components and toxicological mechanism(s). We measured cytotoxicity, cytokines/chemokines, and related gene expressions in murine alveolar macrophages, MH-S, after treated with 20 PM(2.5) samples. Significant, dose-dependent effects on cell viability, cytokine/chemokine release and mRNA expressions were observed. The cytotoxicity caused at equal mass concentration of PM(2.5) was notably reduced (p<0.05) by control measures, and significant association was found for viability and elemental zinc in PM(2.5). Endotoxin content in PM(2.5) correlated with all of the eight detected cytokines/chemokines; elemental and organic carbon correlated with four; arsenic and chromium correlated with six and three, respectively; iron and barium showed associations with two; nickel, magnesium, potassium, and calcium showed associations with one. PM(2.5) toxicity in Beijing was substantially dependent on its chemical components, and lowering the levels of specific components in PM(2.5) during the 2008 Olympics resulted in reduced biological responses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fine Guidance Sensing for Coronagraphic Observatories

Science.gov (United States)

Brugarolas, Paul; Alexander, James W.; Trauger, John T.; Moody, Dwight C.

2011-01-01

Three options have been developed for Fine Guidance Sensing (FGS) for coronagraphic observatories using a Fine Guidance Camera within a coronagraphic instrument. Coronagraphic observatories require very fine precision pointing in order to image faint objects at very small distances from a target star. The Fine Guidance Camera measures the direction to the target star. The first option, referred to as Spot, was to collect all of the light reflected from a coronagraph occulter onto a focal plane, producing an Airy-type point spread function (PSF). This would allow almost all of the starlight from the central star to be used for centroiding. The second approach, referred to as Punctured Disk, collects the light that bypasses a central obscuration, producing a PSF with a punctured central disk. The final approach, referred to as Lyot, collects light after passing through the occulter at the Lyot stop. The study includes generation of representative images for each option by the science team, followed by an engineering evaluation of a centroiding or a photometric algorithm for each option. After the alignment of the coronagraph to the fine guidance system, a "nulling" point on the FGS focal point is determined by calibration. This alignment is implemented by a fine alignment mechanism that is part of the fine guidance camera selection mirror. If the star images meet the modeling assumptions, and the star "centroid" can be driven to that nulling point, the contrast for the coronagraph will be maximized.

Proceedings of 20. Symposium of Malaysian Chemical Engineers (SOMChE 2006)

International Nuclear Information System (INIS)

2006-12-01

The objective of the symposium is to provide a platform for participants and relevant chemical engineering community to meet and encourage expertise and knowledge sharing and to allow recent chemical engineering research and innovation works to be properly documented, displayed and made known to interested parties. The subjects discussed are advanced material modeling and simulation bioprocess, catalysis, chemical engineering education (outcome-based education), computational fluid dynamics, drying technology, energy, environment, fine chemicals, food engineering, oil and gas, oleochemical, particle technology, petrochemical, pharmaceutical engineering, polymer technology, process control, process system, engineering, reaction engineering, renewable energy, separation

Chemical characterzation of fine particle emissions from the fireplace combustion of woods grown in the Southern United States.

Science.gov (United States)

Fine, Philip M; Cass, Glen R; Simoneit, Bernd R T

2002-04-01

The fireplace combustion of wood is a significant and largely unregulated source of fine particle pollution in the United States. Source apportionment techniques that use particulate organic compounds as tracers have been successful in determining the contribution of wood smoke to ambient fine particle levels in specific areas in California. To apply these techniques to the rest of the United States, the differences in emissions profiles between different wood smoke sources and fuel types should be resolved. To this end, a series of fireplace source tests was conducted on six fuel wood species found in the Southern United States to determine fine particulate emission factors for total mass, ionic and elemental species, elemental and organic carbon, and over 250 individual organic compounds. The wood species tested, chosen for their high abundance and availability in the Southern U.S. region, were yellow poplar, white ash, sweetgum, mockernut hickory, loblolly pine, and slash pine. The differences in the emissions of compounds such as substituted phenols and resin acids help to distinguish between the smoke from hardwood and softwood combustion. Levoglucosan, a cellulose pyrolysis product which may serve as a tracer for wood smoke in general, was quantified in the emissions from all the wood species burned. The furofuran lignan, yangambin, which was emitted in significant quantities from yellow poplar combustion and not detected in any of the other North American wood smokes, is a potential species-specific molecular tracer which may be useful in qualitatively identifying particulate emissions from a specific geographical area where yellow poplar is being burned.

The announcement of the Ministry of Foreign Affairs of the Slovak Republic on acceptance of the Basel Convention on the Control of transboundary movements of hazardous wastes

International Nuclear Information System (INIS)

2000-01-01

The Ministry of Foreign Affairs of the Slovak Republic (as well as the Secretary-General of the United Nations, acting in his capacity as depository, of 6 May 1998) communicates the following: at the Fourth Meeting of the Conference of the Parties to the Basel Convention, held in Kuching, Malaysia, from 23 to 27 February 1998, the Parties proposed an amendment to Annex I and adopted two new Annexes (VIII and IX) to the Basel Convention on the Control of transboundary movements of hazardous wastes and their disposal. The texts of the amendment and the Annexes are transmitted herewith. The changes in the Annex I and Annexes VIII and IX for the Slovak Republic shall into effect on 6 November 1998. The thorium scrap and rare earth scrap are included into the Annex IX, List B

Physical and Chemical Properties of Coal Bottom Ash (CBA) from Tanjung Bin Power Plant

Science.gov (United States)

Izzati Raihan Ramzi, Nurul; Shahidan, Shahiron; Zulkhairi Maarof, Mohamad; Ali, Noorwirdawati

2016-11-01

The objective of this study is to determine the physical and chemical characteristics of Coal Bottom Ash (CBA) obtained from Tanjung Bin Power Plant Station and compare them with the characteristics of natural river sand (as a replacement of fine aggregates). Bottom ash is the by-product of coal combustion during the electricity generating process. However, excess bottom ash production due to the high production of electricity in Malaysia has caused several environmental problems. Therefore, several tests have been conducted in order to determine the physical and chemical properties of bottom ash such as specific gravity, density, particle size distribution, Scanning Electron Microscopic (SEM) and X- Ray Fluorescence (XRF) in the attempt to produce sustainable material from waste. The results indicated that the natural fine aggregate and coal bottom ash have very different physical and chemical properties. Bottom ash was classified as Class C ash. The porous structure, angular and rough texture of bottom ash affected its specific gravity and particle density. From the tests, it was found that bottom ash is recommended to be used in concrete as a replacement for fine aggregates.

高职精细化工实验--十二烷基硫酸钠的制备1例%Recommendation of a fine chemical experiment-the synthesis of sodium dodecyl sulfate

Institute of Scientific and Technical Information of China (English)

张桂锋

2014-01-01

在教学实践的基础上，推荐一个适合高职院校精细化工专业学生的实验---十二烷基硫酸钠的制备。以浓硫酸和尿素为催化剂，用月桂醇(正十二醇)和氨基磺酸反应，然后加入氢氧化钠放尽氨气，所得粗产物，经提纯、干燥精制得白色或淡黄色固体。通过实验可以让学生掌握硫酸化制备阴离子表面活性剂的基本原理和方法，并掌握尾气吸收、提纯等精细化工实验操作技能。%Based on the teaching practice, a fine chemical experiments was recommend, it's suitable for advanced vocational students———the synthesis of sodium dodecyl sulfate. Using sulfuric acid and urea as catalyst, lauryl alcohol ( lauryl alcohol) and amino sulfonic acid were reacted, and sodium hydroxide was put ammonia, so the coarse product was gotten, and then, the white or light yellow solid were obtained by purification and drying. Through the experiment can make the students master the basic principle of sulfating preparation of anionic surfactant and methods, and grasp the experimental operation skills of fine chemical industry, such as the tail gas absorption and purification .

Chemical mass transport between fluid fine tailings and the overlying water cover of an oil sands end pit lake

Science.gov (United States)

Dompierre, Kathryn A.; Barbour, S. Lee; North, Rebecca L.; Carey, Sean K.; Lindsay, Matthew B. J.

2017-06-01

Fluid fine tailings (FFT) are a principal by-product of the bitumen extraction process at oil sands mines. Base Mine Lake (BML)—the first full-scale demonstration oil sands end pit lake (EPL)—contains approximately 1.9 × 108 m3 of FFT stored under a water cover within a decommissioned mine pit. Chemical mass transfer from the FFT to the water cover can occur via two key processes: (1) advection-dispersion driven by tailings settlement; and (2) FFT disturbance due to fluid movement in the water cover. Dissolved chloride (Cl) was used to evaluate the water cover mass balance and to track mass transport within the underlying FFT based on field sampling and numerical modeling. Results indicated that FFT was the dominant Cl source to the water cover and that the FFT is exhibiting a transient advection-dispersion mass transport regime with intermittent disturbance near the FFT-water interface. The advective pore water flux was estimated by the mass balance to be 0.002 m3 m-2 d-1, which represents 0.73 m of FFT settlement per year. However, the FFT pore water Cl concentrations and corresponding mass transport simulations indicated that advection rates and disturbance depths vary between sample locations. The disturbance depth was estimated to vary with location between 0.75 and 0.95 m. This investigation provides valuable insight for assessing the geochemical evolution of the water cover and performance of EPLs as an oil sands reclamation strategy.

Radioactivity in fine papers

International Nuclear Information System (INIS)

Taylor, H.W.; Singh, B.

1993-01-01

The radioactivity of fine papers has been studied through γ-ray spectroscopy with an intrinsic Ge detector. Samples of paper from European and North American sources were found to contain very different amounts of 226 Ra and 232 Th. The processes which introduce radionuclides into paper are discussed. The radioactivity from fine papers makes only a small contribution to an individual's annual radiation dose; nevertheless it is easily detectable and perhaps, avoidable. (Author)

Iron solubility related to particle sulfur content in source emission and ambient fine particles.

Science.gov (United States)

Oakes, M; Ingall, E D; Lai, B; Shafer, M M; Hays, M D; Liu, Z G; Russell, A G; Weber, R J

2012-06-19

The chemical factors influencing iron solubility (soluble iron/total iron) were investigated in source emission (e.g., biomass burning, coal fly ash, mineral dust, and mobile exhaust) and ambient (Atlanta, GA) fine particles (PM2.5). Chemical properties (speciation and mixing state) of iron-containing particles were characterized using X-ray absorption near edge structure (XANES) spectroscopy and micro-X-ray fluorescence measurements. Bulk iron solubility (soluble iron/total iron) of the samples was quantified by leaching experiments. Major differences were observed in iron solubility in source emission samples, ranging from low solubility (iron solubility did not correspond to silicon content or Fe(II) content. However, source emission and ambient samples with high iron solubility corresponded to the sulfur content observed in single particles. A similar correspondence between bulk iron solubility and bulk sulfate content in a series of Atlanta PM2.5 fine particle samples (N = 358) further supported this trend. In addition, results of linear combination fitting experiments show the presence of iron sulfates in several high iron solubility source emission and ambient PM2.5 samples. These results suggest that the sulfate content (related to the presence of iron sulfates and/or acid-processing mechanisms by H(2)SO(4)) of iron-containing particles is an important proxy for iron solubility.

Towards atomically resolved EELS elemental and fine structure mapping via multi-frame and energy-offset correction spectroscopy.

Science.gov (United States)

Wang, Yi; Huang, Michael R S; Salzberger, Ute; Hahn, Kersten; Sigle, Wilfried; van Aken, Peter A

2018-01-01

Electron energy-loss spectroscopy and energy-dispersive X-ray spectroscopy are two of the most common means for chemical analysis in the scanning transmission electron microscope. The marked progress of the instrumentation hardware has made chemical analysis at atomic resolution readily possible nowadays. However, the acquisition and interpretation of atomically resolved spectra can still be problematic due to image distortions and poor signal-to-noise ratio of the spectra, especially for investigation of energy-loss near-edge fine structures. By combining multi-frame spectrum imaging and automatic energy-offset correction, we developed a spectrum imaging technique implemented into customized DigitalMicrograph scripts for suppressing image distortions and improving the signal-to-noise ratio. With practical examples, i.e. SrTiO 3 bulk material and Sr-doped La 2 CuO 4 superlattices, we demonstrate the improvement of elemental mapping and the EELS spectrum quality, which opens up new possibilities for atomically resolved EELS fine structure mapping. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Ultrafine and fine particle formation in a naturally ventilated office as a result of reactions between ozone and scented products

DEFF Research Database (Denmark)

Toftum, Jørn; Dijken, F. v.

2003-01-01

Ultrafine and fine particle formation as a result of chemical reactions between ozone and four different air fresheners and a typical lemon-scented domestic cleaner was studied in a fully furnished, naturally ventilated office. The study showed that under conditions representative of those...

An Einstein-Cartan Fine Structure Constant Definition

Directory of Open Access Journals (Sweden)

Stone R. A. Jr.

2010-01-01

Full Text Available The fine structure constant definition given in Stone R.A. Jr. Progress in Physics, 2010, v.1, 11-13 is compared to an Einstein-Cartan fine structure constant definition. It is shown that the Einstein-Cartan definition produces the correct pure theory value, just not the measure value. To produce the measured value, the pure theory Einstein-Cartan fine structure constant requires only the new variables and spin coupling of the fine structure constant definition in [1].

Fine chemicals for the electronics industry: the proceedings of a symposium organised by the Fine Chemicals and Medicinals Group of the Industrial Division of the Royal Society of Chemistry, Bath, UK, 2-4 April 1986

International Nuclear Information System (INIS)

Bamfield, P.

1986-01-01

Most business surveys on electronic chemicals emphasise the importance of semi-conductor materials, printed circuit board chemicals, hybrid circuit materials and others, e.g. liquid crystal materials. This was expanded in this symposium to include chemicals consumed by the telecommunications, optoelectronics, reprographics, displays, and energy conversion sectors. The burgeoning area of molecular electronics was also considered to be important. (author)

The Effect of Quartz on the Flotation of Fine Wolframite with Octyl Hydroxamic Acid

Directory of Open Access Journals (Sweden)

Qingyou Meng

2017-09-01

Full Text Available The influence of quartz on the flotation of fine wolframite using octyl hydroxamic acid (OHA as the collector was investigated by micro-flotation tests, inductively coupled plasma (ICP measurements, adsorption experiments, zeta potential, and Fourier transform infrared spectroscopy (FT-IR analysis. Micro-flotation tests showed that a large difference in floatability existed between fine wolframite and quartz in the pH range of 7.0 to 10.0. However, in a synthetic mixture, the flotation separation of fine wolframite from quartz became more difficult as the particle size of the latter decreased. When a dissolved solution of wolframite was used as the flotation medium, quartz floatability improved significantly. Zeta potentials of quartz particles shifted positively in the dissolved solution of wolframite compared to distilled water, especially at a pH level of 7.0–10.0, which was attributed to the metal ions dissolved from the wolframite being adsorbed onto the quartz surface. The surface activation of quartz led to an increase in the OHA adsorption and made the surface hydrophobic. FT-IR analysis further demonstrated that OHA could adsorb onto the activated quartz surface through a dominantly chemical process.

47 CFR 76.943 - Fines.

Science.gov (United States)

2010-10-01

... TELEVISION SERVICE Cable Rate Regulation § 76.943 Fines. (a) A franchising authority may impose fines or... specifically at the cable operator, provided the franchising authority has such power under state or local laws. (b) If a cable operator willfully fails to comply with the terms of any franchising authority's order...

A practice of ultra-fine tailings disposal as filling material in a gold mine.

Science.gov (United States)

Deng, D Q; Liu, L; Yao, Z L; Song, K I-I L; Lao, D Z

2017-07-01

A practice of cemented backfill technology with ultra-fine tailings in a gold mine was comprehensively presented, and a series of tests were conducted in accordance with the peculiar properties of ultra-fine tailings and the mining technology conditions. The test results show that, the tailings from Shuiyindong Gold Mine have a great grinding fineness, with the average particle diameter 22.03 μm, in which the ultra-fine particles with the diameter below 20 μm occupying 66.13%. The analysis results of chemical components of tailings indicate that the content of SiO 2 is relatively low, i.e., 33.08%, but the total content of CaO, MgO and Al 2 O 3 is relatively high i.e., 36.5%. After the settlement of 4-6 h, the tailing slurry with the initial concentration of 40% has the maximum settling concentration of 54.692%, and the corresponding maximum settling unit weight is 1.497 g/cm 3 . During the field application, the ultra-fine tailings and PC32.5 cement were mixed with the cement-tailings ratios of 1:3-1:8, and the slurry concentration of 50 wt% was prepared. Using the slurry pump, the prepared cemented backfill slurries flowed into the goaf, and then the strength of the cemented backfill body met the mining technique requirements in Shuiyindong Gold Mine, where the ore body has a smooth occurrence, with the average thickness of approximately 2 m and the inclination angle ranging from 5 to 10°. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of fine motor skills in preterm infants.

Science.gov (United States)

Bos, Arend F; Van Braeckel, Koenraad N J A; Hitzert, Marrit M; Tanis, Jozien C; Roze, Elise

2013-11-01

Fine motor skills are related to functioning in daily life and at school. We reviewed the status of knowledge, in preterm children, on the development of fine motor skills, the relation with gross motor skills, and risk factors for impaired fine motor skills. We searched the past 15 years in PubMed, using ['motor skills' or 'fine motor function' and 'preterm infant'] as the search string. Impaired gross and fine motor skills are among the most frequently occurring problems encountered by preterm children who do not develop cerebral palsy. The prevalence is around 40% for mild to moderate impairment and 20% for moderate impairment. Fine motor skill scores on the Movement Assessment Battery for Children are about 0.62 of a standard deviation lower compared with term children. Risk factors for fine motor impairments include moderately preterm birth (odds ratio [OR] 2.0) and, among very preterm children (development of and recovery from brain injury could guide future intervention attempts aimed at improving fine motor skills of preterm children. © The Authors. Developmental Medicine & Child Neurology © 2013 Mac Keith Press.

The Third Pillar of the Basel Accord: Evidence of borrower discipline in the Kyrgyz banking system

Directory of Open Access Journals (Sweden)

Edgar Demetrio Tovar-García

2016-07-01

Full Text Available We empirically study the asset side of market discipline in the banking system of the Kyrgyz Republic, examining whether borrowers are willing to pay higher interest rates to high-quality banks. Based on dynamic panel models and a dataset with bank information from 23 banks over the period 2010–2012, our findings suggest the presence of market discipline induced by borrowers. In other words, banks with higher capital ratios and liquidity charge higher interest rates on loans. This result has several implications for the banking policy in Kyrgyzstan, where we can recommend to policymakers a disclosure policy following the Third Pillar of Basel III, because not only can the bank's creditors use bank information to penalize the excessive bank risk, but borrowers can also use this information to discipline their banks.

Usage of Crushed Concrete Fines in Decorative Concrete

Science.gov (United States)

Pilipenko, Anton; Bazhenova, Sofia

2017-10-01

The article is devoted to the questions of usage of crushed concrete fines from concrete scrap for the production of high-quality decorative composite materials based on mixed binder. The main problem in the application of crushed concrete in the manufacture of decorative concrete products is extremely low decorative properties of crushed concrete fines itself, as well as concrete products based on them. However, crushed concrete fines could have a positive impact on the structure of the concrete matrix and could improve the environmental and economic characteristics of the concrete products. Dust fraction of crushed concrete fines contains non-hydrated cement grains, which can be opened in screening process due to the low strength of the contact zone between the hydrated and non-hydrated cement. In addition, the screening process could increase activity of the crushed concrete fines, so it can be used as a fine aggregate and filler for concrete mixes. Previous studies have shown that the effect of the usage of the crushed concrete fines is small and does not allow to obtain concrete products with high strength. However, it is possible to improve the efficiency of the crushed concrete fines as a filler due to the complex of measures prior to mixing. Such measures may include a preliminary mechanochemical activation of the binder (cement binder, iron oxide pigment, silica fume and crushed concrete fines), as well as the usage of polycarboxylate superplasticizers. The development of specific surface area of activated crushed concrete fines ensures strong adhesion between grains of binder and filler during the formation of cement stone matrix. The particle size distribution of the crushed concrete fines could achieve the densest structure of cement stone matrix and improve its resistance to environmental effects. The authors examined the mechanisms of structure of concrete products with crushed concrete fines as a filler. The results of studies of the properties of

CDC WONDER: Daily Fine Particulate Matter

Data.gov (United States)

U.S. Department of Health & Human Services — The Daily Fine Particulate Matter data available on CDC WONDER are geographically aggregated daily measures of fine particulate matter in the outdoor air, spanning...

Granulation of coke breeze fine for using in the sintering process

Directory of Open Access Journals (Sweden)

Mohamed F.M.

2010-01-01

Full Text Available Coke breeze is the main fuel used in the sintering process. The value of -3+1 mm. represents the most favorable particle size for coke breeze in the sintering process. About 20% of total coke fines (-0.5 mm are produced during different steps of preparation. Introducing these fines during the sintering process proves to be very harmful for different operating parameters. Thus ,this study aims at investigating the production of granules resulting from these fines using molasses as organic binder and its application in sintering of an iron ore. The results showed that the granules having the highest mechanical properties were obtained with 14.5 wt % molasses addition. The sintering experiments were performed by using coke breeze in different shapes (-3+1 mm in size, coke breeze without sieving and coke breeze granules -3+1 mm. The reduction experiments, microscopic structure and X-ray analysis for the produced sinter were carried out. The results revealed that, all sinter properties (such as shatter test, productivity of sinter machine and blast furnace, reduction time and chemical composition for produced sinter by using coke breeze with size -3+1 mm and coke breeze granules were almost the same. The iron ore sinter which was produced by using coke breeze without sieving yielded low productivity for both sinter machine and blast furnace. Furthermore, using coke breeze without sieving in sintering of an iron ore decreases the vertical velocity of sinter machine and increases the reduction time.

Stress-induced light scattering method for the detection of latent flaws on fine polished glass substrates.

Science.gov (United States)

Sakata, Y; Sakai, K; Nonaka, K

2014-08-01

Fine polishing techniques, such as the chemical mechanical polishing treatment, are one of the most important technique to glass substrate manufacturing. Mechanical interaction in the form of friction occurs between the abrasive and the substrate surface during polishing, which may cause formation of latent flaws on the glass substrate surface. Fine polishing-induced latent flaws may become obvious during a subsequent cleaning process if glass surfaces are corroded away by chemical interaction with the cleaning liquid. Latent flaws thus reduce product yield. In general, non-destructive inspection techniques, such as the light-scattering methods, used to detect foreign matters on the glass substrate surface. However, it is difficult to detect latent flaws by these methods because the flaws remain closed. Authors propose a novel inspection technique for fine polishing-induced latent flaws by combining the light scattering method with stress effects, referred to as the stress-induced light scattering method (SILSM). SILSM is able to distinguish between latent flaws and particles on the surface. In this method, samples are deformed by an actuator and stress effects are induced around the tips of latent flaws. Due to the photoelastic effect, the refractive index of the material around the tip of a latent flaw is changed. This changed refractive index is in turn detected by a cooled charge-coupled device camera as variations in light scattering intensity. In this report, surface latent flaws are detected non-destructively by applying SILSM to glass substrates, and the utility of SILSM evaluated as a novel inspection technique.

Electroosmotic transport in fine grained sediments with respect to pore throats

Energy Technology Data Exchange (ETDEWEB)

Krauss, H.; Zorn, R.; Haus, R.; Czurda, K. [Dept. of Applied Geology, Univ. Karlsruhe (Germany)

2001-07-01

Electroosmotic experiments were performed with two different fine grained soils, which were consolidated in different ways. The electroosmotic permeability was calculated using the transported volume of water under a dc electric field. In addition to the pH-values prior and after the experiments near the anode and cathode the dominating pore throat-diameters of the samples were analysed by mercury porosimetry. The electroosmotic permeability can be correlated with the dominating pore throat-diameter. Not only chemical parameters like zeta-potential or ion-concentration but also the kind and structure of the soil particles characterize electroosmotic transport. (orig.)

A study of human DPOAE fine structure

DEFF Research Database (Denmark)

Reuter, Karen; Hammershøi, Dorte

height and ripple prevalence. Temporary changes of the DPOAE fine structure are analyzed by measuring DPOAE both before and after exposing some of the subjects to an intense sound. The characteristic patterns of fine structure can be found in the DPOAE of all subjects, though they are individual and vary...... fine structures are obtained from 74 normalhearing humans using primary levels of L1/L2=65/45 dB. The subjects belong to groups with different age and exposure history. A classification algorithm is developed, which quantifies the fine structure by the parameters ripple place, ripple width, ripple...

Fine 5 Eesti tantsuväljal / Iiris Viirpalu

Index Scriptorium Estoniae

Viirpalu, Iiris, 1992-

2017-01-01

Nüüdistantsuteatril Fine 5 täitub tänavu 25. tegutsemisaasta. Fine 5 käekirjast. Vestlusest Fine 5 tantsuteatri ja -kooli kauaaegsete kunstiliste juhtide Renee Nõmmiku ja Tiina Olleskiga Eesti tantsukunstist

Revisiting fine-tuning in the MSSM

Energy Technology Data Exchange (ETDEWEB)

Ross, Graham G. [Oxford Univ. (United Kingdom). Rudolf Peierls Centre for Theoretical Physics; Schmidt-Hoberg, Kai [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Staub, Florian [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Inst. fuer Theoretische Physik; Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Experimentelle Kernphysik

2017-03-15

We evaluate the amount of fine-tuning in constrained versions of the minimal supersymmetric standard model (MSSM), with different boundary conditions at the GUT scale. Specifically we study the fully constrained version as well as the cases of non-universal Higgs and gaugino masses. We allow for the presence of additional non-holomorphic soft-terms which we show further relax the fine-tuning. Of particular importance is the possibility of a Higgsino mass term and we discuss possible origins for such a term in UV complete models. We point out that loop corrections typically lead to a reduction in the fine-tuning by a factor of about two compared to the estimate at tree-level, which has been overlooked in many recent works. Taking these loop corrections into account, we discuss the impact of current limits from SUSY searches and dark matter on the fine-tuning. Contrary to common lore, we find that the MSSM fine-tuning can be as small as 10 while remaining consistent with all experimental constraints. If, in addition, the dark matter abundance is fully explained by the neutralino LSP, the fine-tuning can still be as low as ∝20 in the presence of additional non-holomorphic soft-terms. We also discuss future prospects of these models and find that the MSSM will remain natural even in the case of a non-discovery in the foreseeable future.

Revisiting fine-tuning in the MSSM

Energy Technology Data Exchange (ETDEWEB)

Ross, Graham G. [Rudolf Peierls Centre for Theoretical Physics, University of Oxford, 1 Keble Road, Oxford OX1 3NP (United Kingdom); Schmidt-Hoberg, Kai [DESY, Notkestraße 85, D-22607 Hamburg (Germany); Staub, Florian [Institute for Theoretical Physics (ITP), Karlsruhe Institute of Technology, Engesserstraße 7, D-76128 Karlsruhe (Germany); Institute for Nuclear Physics (IKP), Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

2017-03-06

We evaluate the amount of fine-tuning in constrained versions of the minimal supersymmetric standard model (MSSM), with different boundary conditions at the GUT scale. Specifically we study the fully constrained version as well as the cases of non-universal Higgs and gaugino masses. We allow for the presence of additional non-holomorphic soft-terms which we show further relax the fine-tuning. Of particular importance is the possibility of a Higgsino mass term and we discuss possible origins for such a term in UV complete models. We point out that loop corrections typically lead to a reduction in the fine-tuning by a factor of about two compared to the estimate at tree-level, which has been overlooked in many recent works. Taking these loop corrections into account, we discuss the impact of current limits from SUSY searches and dark matter on the fine-tuning. Contrary to common lore, we find that the MSSM fine-tuning can be as small as 10 while remaining consistent with all experimental constraints. If, in addition, the dark matter abundance is fully explained by the neutralino LSP, the fine-tuning can still be as low as ∼20 in the presence of additional non-holomorphic soft-terms. We also discuss future prospects of these models and find that the MSSM will remain natural even in the case of a non-discovery in the foreseeable future.

Process of briquetting fine shale

Energy Technology Data Exchange (ETDEWEB)

Kraemer, J

1943-05-05

A process is described for the preparation of briquetts of fine bituminous shale, so-called Mansfield copper shale, without addition of binding material, characterized in that the fine shale is warmed to about 100/sup 0/C and concurrently briquetted in a high-pressure rolling press or piece press under a pressure of 300 to 800 kg/cm/sup 2/.

A study on the manufacturing technology of material for fine chemical and electronic industry use.

Energy Technology Data Exchange (ETDEWEB)

Choi, Sang-Keun; Kim, Byoung-Gon; Chung, Hun-Saeng [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

1999-12-01

The research results are summarized as follows; (1) An investigation on ultra-fine grinding characteristics of crystalline graphite on dry base system by vacuum technique was performed. Natural graphite grinding is inefficient, since graphite has lamella structures which cause the high lubrication by slipping of the layers. However, this lamella structure causes difficulty in grinding. Interposition states of grinding obstacle materials between graphite layers was proposed. (2) An investigation on the oxygen adsorption characteristics of ultrafine crystalline graphite powders(produced by grinding in vacuum) by surface treatment using an attrition mill on dry base was carried out. Adsorbed oxygen on graphite surface was known to influence the suspension stability of graphite particles. (3) The result of scale-up test shows that sericite concentrate obtained about 31.91% Al{sub 2}O{sub 3}, 9.76% K{sub 2}0 and 1.45% Fe{sub 2}O{sub 3}. The process of grinding and classification is obtained fine mica mean size of 2.39 {mu}m such as 3.5 wt.% yield. (4) The dry process of surface modification has been achieved up to 91 for whiteness as 20 min ground samples. Polymer microcapsulation was carried out on the mica surface. The results are excellent hydrophobic properties which is applied cosmetics industry. The results shows a possibility of producing nano size composite materials of 200-500nm and emitting test on purified sericite appears 0.914-0.915 intensity in wave length of 5-20 {mu}m. The delamination effect of surface coated sericite and Muscovite by using Theta-composer. (author). 105 refs., 56 tabs., 139 figs.

The influence of chemical composition and fineness on the performance of alkali activated cements obtained from blast furnace slags

International Nuclear Information System (INIS)

Langaro, Eloise Aparecida; Matoski, Adalberto; Luz, Caroline Angulski da; Buth, Islas Stein; Moraes, Maryah Costa de; Pereira Filho, Jose Ilo

2017-01-01

New binders are being developed for concrete in order to reduce the environmental impact mainly related to CO_2 emissions. Alkali -activated cements (CATs) are obtained from lime-aluminosilicate materials and an alkali activator and can reduce by 80% the emission of CO_2 compared to Portland Cement (PC). Papers have also shown physical and mechanical properties similar or higher than those presented by the PC, however, the activation of raw material is complex. Recent papers have also have showed a strong influence of the characteristics of raw material on the performance of CAT, however, little mentioned in the literature.. Therefore, this paper aimed to analyze the influence of characteristics of blast furnace slag (fineness and chemical composition) on the behavior of activated alkali cements. For this purpose, two slags were used, A and B, which were submitted to different milling times; and activated using 5% of NaOH. Mortars and pastes were prepared for compressive strength testing (7 and 28 days), measurements of heat of hydration and investigation of microstructure (XRD and DSC) were made. The results showed that the mortar made with slag A reached a very good mechanical performance, close to 48MPa at 28 days, and higher formation of CSH, in opposite of slag B. The probable hypothesis of this study is that the system formed in CAT made with slag A (containing more Al_2O_3) could provide CSH with a greater incorporation of Al and a lower crystallinity, increasing the mechanical strength. (author)

Nigeria; Publication of Financial Sector Assessment Program Documentation––Detailed Assessment of Compliance of the Basel Core Priciples for Effective Banking Supervision

OpenAIRE

International Monetary Fund

2013-01-01

The assessment of the implementation of the Basel Core Principles (BCP) was conducted for effective banking supervision in Nigeria. The assessment team reviewed the legal framework for banking supervision and held extensive discussions with the staff of the Central Bank of Nigeria (CBN) and the Nigeria Deposit Insurance Corporation (NDIC). It is assessed that Nigeria has recorded significant improvement in its level of compliance with the BCPs, which is attributed to the enhancement of the su...

Trading trash: why the U.S. won't sign on to the Basel convention.

Science.gov (United States)

Schmidt, C W

1999-08-01

Environmentalists worry that hazardous wastes produced in industrialized nations are being dumped in cash-starved developing countries--the countries with the least political or economic clout to resist and the fewest resources for managing these toxic imports. Imported waste can pose a serious threat to the health of human populations and ecosystems if not managed appropriately. In 1989, the international community initiated efforts to reduce the flow of hazardous wastes from industrialized countries to developing countries by drafting a treaty known as the Basel Convention on the Control of Transboundary Wastes and their Disposal. The convention's mission is to strictly regulate the international transfer of hazardous wastes and to ensure that wastes are managed and disposed of in an environmentally sound manner. Although the United States supports the convention in theory, it remains the only industrialized country within the Organization for Economic Cooperation and Development yet to ratify it. However, legislation drafted by the Clinton administration that is soon to go before the 106th Congress could make the United States a party to the convention.

Effect of hyperbaric environment on fine motor skills

OpenAIRE

Les, Martin

2017-01-01

Title: Effect of hyperbaric environment on fine motor skills Objectives: The aim of study is to assess the changes fine motor skills due to hyperbaric environment in preparation for selected tests of fine motor skills. Methods: The first method was used empirically - research. Then the method chosen of compilation of the information obtained. The basic method to work was the experimental measurement method specially constructed tests on fine motor skills. All measured values were statisticall...

Risk of pneumonia in obstructive lung disease: A real-life study comparing extra-fine and fine-particle inhaled corticosteroids.

Science.gov (United States)

Sonnappa, Samatha; Martin, Richard; Israel, Elliot; Postma, Dirkje; van Aalderen, Wim; Burden, Annie; Usmani, Omar S; Price, David B

2017-01-01

Regular use of inhaled corticosteroids (ICS) in patients with obstructive lung diseases has been associated with a higher risk of pneumonia, particularly in COPD. The risk of pneumonia has not been previously evaluated in relation to ICS particle size and dose used. Historical cohort, UK database study of 23,013 patients with obstructive lung disease aged 12-80 years prescribed extra-fine or fine-particle ICS. The endpoints assessed during the outcome year were diagnosis of pneumonia, acute exacerbations and acute respiratory events in relation to ICS dose. To determine the association between ICS particle size, dose and risk of pneumonia in unmatched and matched treatment groups, logistic and conditional logistic regression models were used. 14788 patients were stepped-up to fine-particle ICS and 8225 to extra-fine ICS. On unmatched analysis, patients stepping-up to extra-fine ICS were significantly less likely to be coded for pneumonia (adjusted odds ratio [aOR] 0.60; 95% CI 0.37, 0.97]); experience acute exacerbations (adjusted risk ratio [aRR] 0.91; 95%CI 0.85, 0.97); and acute respiratory events (aRR 0.90; 95%CI 0.86, 0.94) compared with patients stepping-up to fine-particle ICS. Patients prescribed daily ICS doses in excess of 700 mcg (fluticasone propionate equivalent) had a significantly higher risk of pneumonia (OR [95%CI] 2.38 [1.17, 4.83]) compared with patients prescribed lower doses, irrespective of particle size. These findings suggest that patients with obstructive lung disease on extra-fine particle ICS have a lower risk of pneumonia than those on fine-particle ICS, with those receiving higher ICS doses being at a greater risk.

Fine structure studies of terbium atoms

International Nuclear Information System (INIS)

Abhay Kumar; Bandyopadhyay, Krishnanath; Niraj Kumar

2012-01-01

Terbium (Z = 65) is a typical rare-earth element. Fine structure of spectural lines of terbium (Tb) are presented using the laser optogalvanic spectroscopic technique. Altogether eighty transitions in the 5686-6367 A range have been observed in the fine structure spectrum of 159 Tb. Wavelengths of all the observed transitions have been determined. Out of 80 transitions of Tb, a total of 59 transitions are being reported for the first time. Classifications of 39 new transitions have been provided using the known energy levels, Doppler-limited optogalvanic spectroscopic technique is employed to study the fine structure (fs) 159 Tb. (author)

Processed bottom ash for replacing fine aggregate in making high-volume fly ash concrete

OpenAIRE

Antoni; Sulistio Aldi Vincent; Wahjudi Samuel; Hardjito Djwantoro; Hardjito Djwantoro

2017-01-01

Bottom ash is a coal plant by-product that is abundant and underutilized. There is the potential use of bottom ash as a fine aggregate replacement in concrete mixtures; however, the problems of water absorption and uniformity of quality of the material need to be overcome first. In this study, bottom ash was treated by sieve separation and pounding to smaller particle size for use as a sand substitute. The physical and chemical characteristics of bottom ash were tested after treatment includi...

The Execution of Criminal Fine Penalty

Directory of Open Access Journals (Sweden)

Cosmin Peneoașu

2014-05-01

Full Text Available This paper aims at dissecting the criminal provisions on criminal enforcement of fines in current Romanian criminal law with the goal of highlighting the new penal policy stated in the larger field of criminal penalties. In the new Criminal Code the fine penalty experience a new regulation, but also a wider scope compared to the Criminal Code from 1968, with an exponential growth of the number of offenses or variations of them, for which a fine may be imposed as a unique punishment, but, especially, as an alternative punishment to imprisonment. Consequently, to ensure the efficiency of this punishment, the effective enforcement manner of the fine takes a new dimension. The study aims both students and academics or practitioners in the making. Furthermore, throughout the approach of this scientific research, new matters that new criminal legislation brings, are emphasized regarding this institution, both in a positive, and especially under a critical manner.

Remelting of metallurgical fines using thermal plasma

International Nuclear Information System (INIS)

Vicente, L.C.; Neto F, J.B.F.; Bender, O.W.; Collares, M.P.

1992-01-01

A plasma furnace was developed for remelting of ferro alloys and silicon fines. The furnace capacity was about 4 Kg of silicon and power about 50 kW. The fine (20 to 100 mesh) was fed into the furnace directly at the high temperature zone. This system was tested for remelting silicon fines and the results in the recovery of silicon was about 95% and it took place a refine of aluminium and calcium. (author)

Source apportionment of fine organic aerosols in Beijing

Directory of Open Access Journals (Sweden)

S. Guo

2009-11-01

Full Text Available Fine particles (PM_2.5, i.e., particles with an aerodynamic diameter of ≤2.5 μm were collected from the air in August 2005, August–September 2006, and January–February 2007, in Beijing, China. The chemical compositions of particulate organic matter in the ambient samples were quantified by gas chromatography/mass spectrometry. The dominant compounds identified in summertime were n-alkanoic acids, followed by dicarboxylic acids and sugars, while sugars became the most abundant species in winter, followed by polycyclic aromatic hydrocarbons, n-alkanes, and n-alkanoic acids. The contributions of seven emission sources (i.e., gasoline/diesel vehicles, coal burning, wood/straw burning, cooking, and vegetative detritus to particulate organic matter in PM_2.5 were estimated using a chemical mass balance receptor model. The model results present the seasonal trends of source contributions to organic aerosols. Biomass burning (straw and wood had the highest contribution in winter, followed by coal burning, vehicle exhaust, and cooking. The contribution of cooking was the highest in summer, followed by vehicle exhaust and biomass burning, while coal smoke showed only a minor contribution to ambient organic carbon.

Optimization of calcium phosphate fine ceramic powders preparation

Science.gov (United States)

Sezanova, K.; Tepavitcharova, S.; Rabadjieva, D.; Gergulova, R.; Ilieva, R.

2013-12-01

The effect of biomimetic synthesis method, reaction medium and further precursor treatments on the chemical and phase composition, crystal size and morphology of calcium phosphates was examined. Nanosized calcium phosphate precursors were biomimetically precipitated by the method of continuous precipitation in three types of reaction media at pH 8: (i) SBF as an inorganic electrolyte system; (ii) organic (glycerine) modified SBF (volume ratio of 1:1); (iii) polymer (10 g/l xanthan gum or 10 g/l guar gum) modified SBF (volume ratio of 1:1). After maturation (24 h) the samples were lyophilized, calcinated at 300°C for 3 hours, and washed with water, followed by new gelation, lyophilization and step-wise (200, 400, 600, 800, and 1000°C, each for 3 hours) sintering. The reaction medium influenced the chemical composition and particle size but not the morphology of the calcium phosphate powders. In all studied cases bi-phase calcium phosphate fine powders with well-shaped spherical grains, consisting of β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) with a Ca/P ratio of 1.3 - 1.6 were obtained. The SBF modifiers decreased the particle size of the product in the sequence guar gum ˜ xanthan gum < glycerin < SBF medium.

Cellular and Immunological Aspects of Basel Cell Carcinoma

NARCIS (Netherlands)

J.W. Kooy (Angela)

1998-01-01

textabstractThe skin, which is the largest organ of the human body, has several important functions such as protection against infections and chemical and physical influences, regulation of temperature and water balance, vitamin D synthesis, etc. The skin consists of two layers, the dermis and the

Fine motor control

Science.gov (United States)

... gross (large, general) motor control. An example of gross motor control is waving an arm in greeting. Problems ... out the child's developmental age. Children develop fine motor skills over time, by practicing and being taught. To ...

The effect of mycorrhizal inoculation on hybrid poplar fine root dynamics in hydrocarbon contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Gunderson, J.; Knight, J.D.; Van Rees, K.C.J. [Saskatchewan Univ., Saskatoon, SK (Canada). Dept. of Soil Science

2006-07-01

The biological remediation of contaminated soils using plants was discussed. Hybrid poplars are good candidates for phytoremediation because they root deeply, cycle large amounts of water and grow quickly. Their fine root system is pivotal in nutrient and water acquisition. Therefore, in order to maximize the phytoremediation potential, it is important to understand the response of the fine root system. In addition to degrading organic chemicals, ectomycorrhizal (ECM) fungi provide the host with greater access to nutrients. This study determined the relationship between residual soil hydrocarbons and soil properties at a field site. The effects of residual contamination on hybrid poplar fine root dynamics was also examined along with the effect of ectomycorrhizal colonization on hybrid poplar fine root dynamics when grown in diesel contaminated soil under controlled conditions. A minirhizotron camera inside a growth chamber captured images of mycorrhizal inoculation on hybrid poplar fine root production. Walker hybrid poplar seedlings were grown for 12 weeks in a control soil and also in a diesel contaminated soil. Seedlings were also grown in control and diesel contaminated, ectomycorrhizal inoculated soils. The inoculum was a mycorrhizal mix containing Pisolithus tinctorius and Rhizopogon spp. The images showed that colonization by ECM fungi increased hybrid poplar fine root production and aboveground biomass in a diesel contaminated soil compared to non-colonized trees in the same soil. Root:shoot ratios were much higher in the diesel contaminated/non-inoculated treatment than in either of the control soil treatments. Results of phytoremediation in diesel contaminated soil were better in the non-colonized treatment than in the colonized treatment. Both treatments removed more contaminants from the soil than the unplanted control. Much higher quantities of hydrocarbons were found sequestered in the roots from the inoculated treatment than from the non

Development of fine motor skills in preterm infants

NARCIS (Netherlands)

Bos, Arend F.; Van Braeckel, Koenraad N. J. A.; Hitzert, Marrit M.; Tanis, Jozien C.; Roze, Elise

2013-01-01

Fine motor skills are related to functioning in daily life and at school. We reviewed the status of knowledge, in preterm children, on the development of fine motor skills, the relation with gross motor skills, and risk factors for impaired fine motor skills. We searched the past 15 years in PubMed,

SHAPE ANALYSIS OF FINE AGGREGATES USED FOR CONCRETE

Directory of Open Access Journals (Sweden)

Huan He

2016-12-01

Full Text Available Fine aggregate is one of the essential components in concrete and significantly influences the material properties. As parts of natures, physical characteristics of fine aggregate are highly relevant to its behaviors in concrete. The most of previous studies are mainly focused on the physical properties of coarse aggregate due to the equipment limitations. In this paper, two typical fine aggregates, i.e. river sand and crushed rock, are selected for shape characterization. The new developed digital image analysis systems are employed as the main approaches for the purpose. Some other technical methods, e.g. sieve test, laser diffraction method are also used for the comparable references. Shape characteristics of fine aggregates with different origins but in similar size ranges are revealed by this study. Compared with coarse aggregate, fine grains of different origins generally have similar shape differences. These differences are more significant in surface texture properties, which can be easily identified by an advanced shape parameter: bluntness. The new image analysis method is then approved to be efficient for the shape characterization of fine aggregate in concrete.

Modelling the Frequency of Operational Risk Losses under the Basel II Capital Accord: A Comparative study of Poisson and Negative Binomial Distributions

OpenAIRE

Silver, Toni O.

2013-01-01

2013 dissertation for MSc in Finance and Risk Management. Selected by academic staff as a good example of a masters level dissertation. \\ud \\ud This study investigated the two major methods of modelling the frequency of\\ud operational losses under the BCBS Accord of 1998 known as Basel II Capital\\ud Accord. It compared the Poisson method of modelling the frequency of\\ud losses to that of the Negative Binomial. The frequency of operational losses\\ud was investigated using a cross section of se...

Fine filament NbTi superconductive composite

International Nuclear Information System (INIS)

Hong, S.; Grabinsky, G.; Marancik, W.; Pattanayak, D.

1986-01-01

The large superconducting magnet for the high energy physics accelerator requires fine filament composite to minimize the field error due to the persistent current in the filaments. New concepts toward the fine filament composite and its cable fabrication are discussed. Two-stage cables of fine wire with intermediate number of filaments were introduced. The first stage was six wires cables around one and in the second stage this was used to produce a Rutherford cable. The advantage of this process is in the ease of billet fabrication since the number of filaments in a single wire is within the range of easy billet fabrication. The disadvantage is in the cable fabrication. One of the major concerns in the fabrication of fine NbTi filaments composite in a copper matrix is the intermetallic compound formation during the extrusion and heat treatment steps. The hard intermetallic particles degrade the uniformity of the filaments and reduce the critical current density. The process of using Nb barrier between the filaments and copper matrix in order to prevent this CuTi intermetallic particle formation is described

Surface chemical problems in coal flotation

Science.gov (United States)

Taylor, S. R.; Miller, K. J.; Deurbrouck, A. W.

1981-02-01

As the use of coal increases and more fine material is produced by mining and processing, the need for improved methods of coal beneficiation increases. While flotation techniques can help meet these needs, the technique is beset with many problems. These problems involve surface chemical and interfacial properties of the coal-mineral-water slurry systems used in coal flotation. The problems associated with coal flotation include non-selectivity, inefficient reagent utilization, and excessive variablity of results. These problems can be broadely classified as a lack of predictability. The present knowledge of coal flotation is not sufficient, in terms of surface chemical parameters, to allow prediction of the flotation response of a given coal. In this paper, some of the surface chemical properties of coal and coal minerals that need to be defined will be discussed in terms of the problems noted above and their impact on coal cleaning.

Development of advanced mesostructured catalytic coatings on different substrates for fine chemical synthesis

NARCIS (Netherlands)

Protasova, L.N.

2011-01-01

Catalytic microstructured reactors are becoming widely recognized for their unique properties, such as high surface–to–volume ratios, isothermal conditions due to high heat transfer rates, enhanced safety, and potential applications in chemistry and in chemical industry. The efficient use of

Actual problems of exposure risk assessment of finely dispersed aerosols and aerosols of nanoparticles

Directory of Open Access Journals (Sweden)

A. I. Sevalnev

2018-04-01

Full Text Available Purpose of the study – analysis of the scientific literature on generalization of the data on domestic and foreign experience in risk assessment due to exposure to finely dispersed aerosols and aerosols of nanoparticles (NPs. The article summarizes data of long-term studies on the effect of nanomaterials and nanoparticles on the quality of human habitat and health. The domestic and foreign experience of harm health assessment, safety of new types of nanomaterials for the environment and work-related conditions have been analyzed. There are numerous studies of foreign and domestic scientists on the biological activity of nanoparticles and their effect on experimental animals, namely, on the specificity of their effect on various organs and systems of the body. Classification of nanomaterials, depending on their chemical composition, is presented. Attention is paid to the problems of nanosafety, namely, to the evaluation of nanotoxicity of substances and to the definition of the concept of a “dose” for nanoparticles. The data on the presence of finely dispersed and ultra-fine particles in the atmospheric air, which increase risk of respiratory system diseases among residents of large megacities, is given. There is special importance on assessing work conditions and occupational risks in production and use of materials which contain nanoparticles as well as in production processes with formation of the fine dust and nanoparticles indicated in the article. Due to the lack of a clear system for assessing health risks related to the action of nanoparticles, lack of common criteria of harmfulness and maximum allowable concentrations for most nanoparticles and uniform methods of their control, it is suggested to strictly adhere to protective measures in contact with nanomaterials and active improvement of nanosecurity measures. Conclusions. High toxicity and health hazards of finely dispersed and ultra-fine particles confirm need to control their

The aggregation efficiency of very fine volcanic ash

Science.gov (United States)

Del Bello, E.; Taddeucci, J.; Scarlato, P.

2013-12-01

Explosive volcanic eruptions can discharge large amounts of very small sized pyroclasts (under 0.090 mm) into the atmosphere that may cause problems to people, infrastructures and environment. The transport and deposition of fine ash are ruled by aggregation that causes premature settling of fine ash and, as consequence, significantly reduces the concentration of airborne material over long distances. Parameterizing the aggregation potential of fine ash is then needed to provide accurate modelling of ash transport and deposition from volcanic plumes. Here we present the first results of laboratory experiments investigating the aggregation efficiency of very fine volcanic particles. Previous laboratory experiments have shown that collision kinetic and relative humidity provide the strongest effect on aggregation behaviour but were only limited to particles with size > 0.125 mm. In our work, we focus on natural volcanic ash at ambient humidity with particles size aggregation potential. Two types of ash were used in our experiments: fresh ash, collected during fall-out from a recent plume-forming eruption at Sakurajima (Japan -July 2013) and old ash, collected from fall-out tephra deposits at Campi Flegrei (Italy, ca. 10 ka), to account for the different chemical composition and morphoscopic effects of altered ash on aggregation efficiency. Total samples were hand sieved to obtain three classes with unimodal grain size distributions (sieved from the top of a transparent tank where a fan, placed at the bottom, allows turbulent dispersion of particles. Collision and sticking of particles on a vertical glass slide were filmed with a high speed cameras at 6000 fps. Our lenses arrangement provide high image resolution allowing to capture particles down to 0.005 mm in diameter. Video sequences of particles motion and collision were then processed with image analysis and particle tracking tools to determine i) the particle number density and ii) the grain size distribution

Chemical composition and source apportionment of aerosol over the Klang valley

International Nuclear Information System (INIS)

Shamsiah Abdul Rahman; Mohd Suhaimi Hamzah; Abdul Khalik Wood; Nazaratul Ashifa Abdullah Salim; Mohd Suhaimi Elias; Eswiza Sanuri

2009-01-01

This paper reports the study of aerosol chemical composition of fine particles (PM 2.5) and possible sources of air pollution over the Klang Valley, Kuala Lumpur, based on the samples collected for a period of 6 years from July 2000 to Jun 2006. Samples collected were measured for mass, black carbon and elemental content of Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Br and Pb. The fine aerosol mass concentration ranged from 11 - 110 ?g/m3. Black carbon is the major component of the fine aerosol with the weight fraction of 20%, whilst S is the major elemental content with the weight fraction about 5% as relative to the fine particle mass. The factor analysis method, positive matrix factorization (PMF) was then used to confirm the possible sources. The result of PMF analysis produced five-factor sources that contribute to the fine particles in the Klang Valley area. The five factors represent sea spray, industry, motor vehicles, smoke and soil. Motor vehicle is the main source of particulates in the area, with an average contribution of 51% of the fine mass concentration, followed by industry, smoke, sea spray and soil, with average contribution of 28%, 14%, 3.6% and 2.1%, respectively. (Author)

Method of vitrificating fine-containing liquid waste

International Nuclear Information System (INIS)

Hagiwara, Minoru; Matsunaka, Kazuhisa.

1989-01-01

This invention concerns a vitrificating method of liquid wastes containing fines (metal powder discharged upon cutting fuel cans) used in a process for treating high level radioactive liquid wastes or a process for treating liquid wastes from nuclear power plants. Liquid wastes containing fines, slurries, etc. are filtered by a filter vessel comprising glass fibers. The fines are supplied as they are to a glass melting furnace placed in the vessel. Filterates formed upon filteration are mixed with other high level radioactive wastes and supplied together with starting glass material to the glass melting furnace. Since the fine-containing liquid wastes are processed separately from high radioactive liquid wastes, clogging of pipeways, etc. can be avoided, supply to the melting furnace is facilitated and the operation efficiency of the vitrification process can be improved. (I.N.)

Chemical erosion of carbon doped with different fine-grain carbides

International Nuclear Information System (INIS)

Balden, M.; Garcia-Rosales, C.; Behrisch, R.; Roth, J.; Paz, P.; Etxeberria, J.

2001-01-01

Several carbide-doped (SiC, TiC, V 8 C 7 , WC, ZrC) graphites have been produced. The erosion of these materials at low-energy (eV) hydrogen ion bombardment has been investigated using the weight-loss method, mass spectroscopy, ion beam analysis, and scanning electron microscopy (SEM). The erosion yields of the WC- and V 8 C 7 -doped graphites are reduced by a factor of 2 for 30 eV D at 300 K compared to pure graphite. This observed reduction is partly attributed to surface enrichment of carbide due to preferential C erosion. The other part is assigned to changes in the chemical erosion process (Y surf ) as well as at elevated temperatures in the thermal activated process (Y therm ). The reduction of both erosion processes is determined for all dopants to be more than 25% of the erosion yield of the undoped graphite

Plant cell tissue culture: A potential source of chemicals

Energy Technology Data Exchange (ETDEWEB)

Scott, C.D.; Dougall, D.K.

1987-08-01

Higher plants produce many industrially important products. Among these are drugs and medicinal chemicals, essential oils and flavors, vegetable oils and fats, fine and specialty chemicals, and even some commodity chemicals. Although, currently, whole-plant extraction is the primary means of harvesting these materials, the advent of plant cell tissue culture could be a much more effective method of producing many types of phytochemicals. The use of immobilized plant cells in an advanced bioreactor configuration with excretion of the product into the reactor medium may represent the most straightforward way of commercializing such techniques for lower-value chemicals. Important research and development opportunities in this area include screening for plant cultures for nonmedical, lower-value chemicals; understanding and controlling plant cell physiology and biochemistry; optimizing effective immobilization methods; developing more efficient bioreactor concepts; and perfecting product extraction and purification techniques. 62 refs., 2 figs.

The fine particle emissions of energy production in Finland

International Nuclear Information System (INIS)

Ohlstroem, M.

1998-01-01

The main purpose of this master's thesis was to define the fine particle (PM2.5, diameter under 2,5 μm) emissions of the energy production and to compare the calculated emission factors between different energy production concepts. The purpose was also to define what is known about fine particle emissions and what should still be studied/measured. The purpose was also to compare briefly the fine particle emissions of energy production and vehicle traffic, and their correlations to the fine particle concentrations of urban air. In the theory part of this work a literature survey was made about fine particles in energy production, especially how they form and how they are separated from the flue gas. In addition, the health effects caused by fine particles, and different measuring instruments were presented briefly. In the experimental part of this work, the aim was to find out the fine particle emissions of different energy production processes by calculating specific emission factors (mg/MJ fuel ) from powerplants' annual total particulate matter emissions (t/a), which were obtained from VAHTI-database system maintained by the Finnish Environmental Institute, and by evaluating the share of fine particles from total emissions with the help of existing measurement results. Only those energy production processes which produce significantly direct emissions of solid particles have been treated (pulverised combustion and oil burners from burner combustion, fluidized bed combustion processes, grate boilers, recovery boilers and diesel engines). The processes have been classified according to boiler type, size category, main fuel and also according to dust separation devices. To be able to compare different energy production processes, shared specific emission factor have been calculated for the similar subprocesses. The fine particle emissions depend strongest on the boiler size category and dust separation devices used. Spent fuel or combustion technique does not have

Cement waste form development for ion-exchange resins and fine particles ILW of AREVA La Hague Reprocessing Plant

International Nuclear Information System (INIS)

Chartier, D.; Sanchez-Canet, J.; Avril, D.; Roussel, C.; Pineau, J.N.

2015-01-01

Wastes have been temporarily stored in dedicated silos in La Hague reprocessing plant. These wastes are to be retrieved in the near future and to be conditioned for final disposal. Some of these wastes are supposed to be encapsulated in cement matrix and, depending on the chemical composition of the waste streams, several projects are presently ongoing. The present article aims to focus on one amongst these cement encapsulation relevant projects, namely the conditioning of a mix of spent ion-exchange resins (from filtration of pool) and fine particles (insoluble fission products from spent fuel dissolution and Zircaloy and stainless steel fines from cladding shearing). The project, aims to retrieve these wastes from a silo, separate the resins and fine particles from the other waste (hulls and end pieces), in order to encapsulate the intermediate-level fines and resins in a cement matrix. The waste forms will be produced in AREVA's La Hague reprocessing plant, prior to being sent as intermediate-level waste to a long-term repository. The cement formulation developments were initially carried out at a small scale at C.E.A. Marcoule on surrogate wastes. One of the main issues that were considered was the chemical compatibility between waste and cement matrix. Indeed, swelling phenomena are sometimes reported when ion exchange resins are embedded in cement matrixes such as Portland cement. This kind of destructive phenomenon has been prevented by the use of cement containing a high amount of ground granulated blast furnace slag. The impact of the variability of ionic charge of the resins on the waste form's properties has also been addressed in order to comfort the results obtained on the reference ionic charge of resins NaNO 3 . Once the results obtained were satisfactory, intermediate scale and full scale tests were performed by AREVA. These tests have focused on adjusting the mixing process and controlling the thermal properties of the mix during setting

HONO and Inorganic Fine Particle Composition in Typical Monsoon Region with Intensive Anthropogenic Emission: In-situ Observations and Source Identification.

Science.gov (United States)

Xie, Y.; Nie, W.; Ding, A.; Huang, X.

2015-12-01

Yangtze River Delta (YRD) is one of the most typical monsoon area with probably the most largest population intensity in the world. With sharply economic development and the large anthropogenic emissions, fine particle pollution have been one of the major air quality problem and may further have impact on the climate system. Though a lot of control policy (sulfur emission have been decreasing from 2007) have been conducted in the region, studies showed the sulfate in fine particles still take major fraction as the nitrate from nitrogen oxides increased significantly. In this study, the role of inorganic chemical compositions in fine particles was investigated with two years in-situ observation. Sulfate and Nitrate contribute to fine particle mass equally in general, but sulfate contributes more during summer and nitrate played more important role in winter. Using lagrangian dispersion backward modeling and source contribution clustering method, the impact of airmass coming from different source region (industrial, dust, biogenic emissions, etc) on fine particle inorganic compositions were discussed. Furthermore, we found two unique cases showing in-situ implications for sulfate formation by nitrogen dioxide oxidation mechanisms. It was showed that the mixing of anthropogenic pollutants with long-range transported mineral dust and biomass burning plume would enhance the sulfate formation by different chemistry mechanisms. This study focus on the complex aspects of fine particle formation in airmasses from different source regions: . It highlights the effect of NOx in enhancing the atmospheric oxidization capacity and indicates a potentially very important impact of increasing NOx on air pollution formation and regional climate change in East Asia.

MOTORIC STIMULATION RELATED TO FINE MOTORIC DEVELOPMENT ON CHILD

Directory of Open Access Journals (Sweden)

Mira Triharini

2017-07-01

Full Text Available Introduction: Motor developmental stimulation is an activity undertaken to stimulate the children basic skills and so they can grow and develop optimally. Children who obtain a direct stimulus will grow faster than who get less stimulus. Mother’s behavior of stimulation is very important for children, it is considering as the basic needs of children and it must be fulfilled. Providing good stimulation could optimize fine motor development in children. The purpose of this study was to analyze mother’s behavior about motor stimulation with fine motor development in toddler age 4-5 years old. Method: Design have been  used in this study was cross sectional. Population were mothers and their toddler in Group A of Dharma Wanita Persatuan Driyorejo Gresik Preschool. Sample were 51 respondents recruited by using purposive sampling technique according to inclusion and exclusion criteria. The independent variable was mother’s behavior about motor stimulation whereas dependent variable was fine motor development in toddler. The data were collected using questionnaire and conducting observation on fine motor development based on Denver Development Screening Test (DDST. Data then analyzed using Spearman Rho (r test to find relation between mother’s behaviors about stimulation motor on their toddler fine motor development. Result: Results  of this study showed that there were correlations between mother’s knowledge and fine motor development in toddler (p=0.000, between mother’s attitude and fine motor development in toddler (p=0.000, and between mother’s actions and fine motor development in toddler (p=0.000. Analysis: In sort study found that there were relation between fine motor development and mother’s behavior. Discussion: Therefore mother’s behavior needed to be improved. Further research about stimulation motor and fine motor development aspects in toddler is required.

Significance of Fines in Hot Mix Asphalt Synthesis

Directory of Open Access Journals (Sweden)

Kalaitzaki Elvira

2017-07-01

Full Text Available According to their size, aggregates are classified in coarse grained, fine grained, and fines. The determination of fines content in aggregate materials is very simple and is performed through the aggregate washing during the sieving procedure to define the gradation curve. The very fine material consists of grains having a size lower than 63 μm. The presence of fines directly influences the composition and performance of concrete and asphalt mixtures (e.g. asphalt content, elasticity, fracture. The strength and load carrying capacity of hot mix asphalt (HMA results from the aggregate framework created through particle-particle contact and interlock. Fines or mineral filler have a role in HMA. The coarse aggregate framework is filled by the sand-sized material and finally by the mineral filler. At some point, the smallest particles lose contact becoming suspended in the binder not having the particle-particle contact that is created by the larger particles. The overall effect of mineral filler in hot mix asphalt specimens has been investigated through a series of laboratory tests. It is clear that a behaviour influenced by the adherence of fines to asphalt film has been developed. The optimum bitumen content requirement in case of stone filler is almost the same as that for fly ash. It has been found that the percentage of fly ash filler is crucial if it exceeds approximately a value of 4%.

Two proofs of Fine's theorem

International Nuclear Information System (INIS)

Halliwell, J.J.

2014-01-01

Fine's theorem concerns the question of determining the conditions under which a certain set of probabilities for pairs of four bivalent quantities may be taken to be the marginals of an underlying probability distribution. The eight CHSH inequalities are well-known to be necessary conditions, but Fine's theorem is the striking result that they are also sufficient conditions. Here two transparent and self-contained proofs of Fine's theorem are presented. The first is a physically motivated proof using an explicit local hidden variables model. The second is an algebraic proof which uses a representation of the probabilities in terms of correlation functions. - Highlights: • A discussion of the various approaches to proving Fine's theorem. • A new physically-motivated proof using a local hidden variables model. • A new algebraic proof. • A new form of the CHSH inequalities

Fine-grained sediment dispersal along the California coast

Science.gov (United States)

Warrick, Jonathan A.; Storlazzi, Curt D.

2013-01-01

Fine-grained sediment (silt and clay) enters coastal waters from rivers, eroding coastal bluffs, resuspension of seabed sediment, and human activities such as dredging and beach nourishment. The amount of sediment in coastal waters is an important factor in ocean ecosystem health, but little information exists on both the natural and human-driven magnitudes of fine-grained sediment delivery to the coastal zone, its residence time there, and its transport out of the system—information upon which to base environmental assessments. To help fill these information gaps, the U.S. Geological Survey has partnered with Federal, State, and local agencies to monitor fine-grained sediment dispersal patterns and fate in the coastal regions of California. Results of these studies suggest that the waves and currents of many of the nearshore coastal settings of California are adequately energetic to transport fine-grained sediment quickly through coastal systems. These findings will help with the management and regulation of fine-grained sediment along the U.S. west coast.

Fine motor skills in children with Down syndrome

OpenAIRE

Memišević Haris; Mačak Amra

2014-01-01

Fine motor skills are very important for children's overall functioning. Their development is necessary for many everyday activities such as dressing, feeding, holding objects, etc. Moreover, fine motor skills are also correlated to the children's academic success at school. Recent research suggests a close relationship between motor skills and intelligence. Given the relative paucity of literature on fine motor skills in different etiological groups of children with intellectual disability (...

A 2D Micromodel Study of Fines Migration and Clogging Behavior in Porous Media: Implications of Fines on Methane Extraction from Hydrate-Bearing Sediments

Science.gov (United States)

Cao, S. C.; Jang, J.; Waite, W. F.; Jafari, M.; Jung, J.

2017-12-01

Fine-grained sediment, or "fines," exist nearly ubiquitously in natural sediment, even in the predominantly coarse-grained sediments that host gas hydrates. Fines within these sandy sediments can play a crucial role during gas hydrate production activities. During methane extraction, several processes can alter the mobility and clogging potential of fines: 1) fluid flow as the formation is depressurized to release methane from hydrate; 2) pore-fluid chemistry shifts as pore-fluid brine freshens due to pure water released from dissociating hydrate; 3) the presence of a moving gas/water interface as gas evolves from dissociating hydrate and moves through the reservoir toward the production well. To evaluate fines migration and clogging behavior changes resulting from methane gas production and pore-water freshening during hydrate dissociation, 2D micromodel experiments have been conducted on a selection of pure fines, pore-fluids, and micromodel pore-throat sizes. Additionally, tests have been run with and without an invading gas phase (CO2) to test the significance of a moving meniscus on fines mobility and clogging. The endmember fine particles chosen for this research include silica silt, mica, calcium carbonate, diatoms, kaolinite, illite, and bentonite (primarily made of montmorillonite). The pore fluids include deionized water, sodium chloride brine (2M concentration), and kerosene. The microfluidic pore models, used as porous media analogs, were fabricated with pore-throat widths of 40, 60, and 100 µm. Results from this research show that in addition to the expected dependence of clogging on the ratio of particle-to-pore-throat size, pore-fluid chemistry is also a significant factor because the interaction between a particular type of fine and pore fluid influences that fine's capacity to cluster, clump together and effectively increase its particle "size" relative to the pore-throat width. The presence of a moving gas/fluid meniscus increases the clogging

Trajectory calculation of a trapped particle in electro-dynamic balance for study of chemical reaction of aerosol particles

International Nuclear Information System (INIS)

Okuma, Miho; Itou, Takahiro; Harano, Azuchi; Takarada, Takayuki; James, Davis E

2013-01-01

Electrodynamic balance (EDB) is a powerful tool for investigating the chemical reactions between a fine particle and gaseous species. But the EDB device alone is inadequate to match the rapid weight change of a fine particle caused by chemical reactions, because it takes a few seconds to set a fine particle at null point. The particle trajectory calculation for the trapped particle added to the EDB is thus a very useful tool for the measurement of the transient response of a particle weight change with no need to adjust the applied DC voltage to set the null point. The purpose of this study is to develop the trajectory calculation method to track the particle oscillation pattern in the EDB and examine the possibility for kinetic studies on the reaction of a single aerosol particle with gaseous species. The results demonstrated the feasibility of applying particle trajectory calculation to realize the research purpose.

Development of a fine and ultra-fine group cell calculation code SLAROM-UF for fast reactor analyses

International Nuclear Information System (INIS)

Hazama, Taira; Chiba, Go; Sugino, Kazuteru

2006-01-01

A cell calculation code SLAROM-UF has been developed for fast reactor analyses to produce effective cross sections with high accuracy in practical computing time, taking full advantage of fine and ultra-fine group calculation schemes. The fine group calculation covers the whole energy range in a maximum of 900-group structure. The structure is finer above 52.5 keV with a minimum lethargy width of 0.008. The ultra-fine group calculation solves the slowing down equation below 52.5 keV to treat resonance structures directly and precisely including resonance interference effects. Effective cross sections obtained in the two calculations are combined to produce effective cross sections over the entire energy range. Calculation accuracy and improvements from conventional 70-group cell calculation results were investigated through comparisons with reference values obtained with continuous energy Monte Carlo calculations. It was confirmed that SLAROM-UF reduces the difference in k-infinity from 0.15 to 0.01% for a JOYO MK-I fuel subassembly lattice cell calculation, and from - 0.21% to less than a statistical uncertainty of the reference calculation of 0.03% for a ZPPR-10A core criticality calculation. (author)

Fine Channel Networks

Science.gov (United States)

1997-01-01

A color image of fine channel networks on Mars; north toward top. The scene shows heavily cratered highlands dissected by dendritic open channel networks that dissect steep slopes of impact crater walls. This image is a composite of Viking high-resolution images in black and white and low-resolution images in color. The image extends from latitude 9 degrees S. to 5 degrees S. and from longitude 312 degrees to 320 degrees; Mercator projection. The dendritic pattern of the fine channels and their location on steep slopes leads to the interpretation that these are runoff channels. The restriction of these types of channels to ancient highland rocks suggests that these channels are old and date from a time on Mars when conditions existed for precipitation to actively erode rocks. After the channels reach a low plain, they appear to end. Termination may have resulted from burial by younger deposits or perhaps the flows percolated into the surface materials and continued underground.

Method for producing dustless graphite spheres from waste graphite fines

Science.gov (United States)

Pappano, Peter J [Oak Ridge, TN; Rogers, Michael R [Clinton, TN

2012-05-08

A method for producing graphite spheres from graphite fines by charging a quantity of spherical media into a rotatable cylindrical overcoater, charging a quantity of graphite fines into the overcoater thereby forming a first mixture of spherical media and graphite fines, rotating the overcoater at a speed such that the first mixture climbs the wall of the overcoater before rolling back down to the bottom thereby forming a second mixture of spherical media, graphite fines, and graphite spheres, removing the second mixture from the overcoater, sieving the second mixture to separate graphite spheres, charging the first mixture back into the overcoater, charging an additional quantity of graphite fines into the overcoater, adjusting processing parameters like overcoater dimensions, graphite fines charge, overcoater rotation speed, overcoater angle of rotation, and overcoater time of rotation, before repeating the steps until graphite fines are converted to graphite spheres.

Fine Arts Database (FAD)

Data.gov (United States)

General Services Administration — The Fine Arts Database records information on federally owned art in the control of the GSA; this includes the location, current condition and information on artists.

Fine motor skills in children with Down syndrome

Directory of Open Access Journals (Sweden)

Memišević Haris

2014-01-01

Full Text Available Fine motor skills are very important for children's overall functioning. Their development is necessary for many everyday activities such as dressing, feeding, holding objects, etc. Moreover, fine motor skills are also correlated to the children's academic success at school. Recent research suggests a close relationship between motor skills and intelligence. Given the relative paucity of literature on fine motor skills in different etiological groups of children with intellectual disability (ID, we examined these skills in children with Down syndrome. The sample for this study comprised 90 children with ID, aged 7-15, who were divided in three etiological groups: 1. Down syndrome, 2. Organic/other genetic cause of ID and 3. Unknown etiology of ID. Fine motor skills were assessed by the Purdue Pegboard Test. The results of this study indicate that children with Down syndrome did not differ statistically significantly from the other two etiological groups. On the other hand, children with unknown etiology of ID performed statistically better than children with organic/other genetic cause of ID. An additional goal was to examine fine motor skills in children with Down syndrome in relation to the child's sex. There were no statistically significant differences in fine motor skills between girls and boys with Down syndrome. It is important to provide children with Down syndrome, and all other children with ID, with early (rehabilitation programs for the improvement of their fine motor skills. Special educators and rehabilitators should play a crucial role in the assessment and in creating programs for the development of these skills.

Fine needle aspiration cytology of cervicofacial actinomycosis

Directory of Open Access Journals (Sweden)

Venkatesh Kusuma

2008-01-01

Full Text Available Actinomycosis is a chronic infection caused by Actinomyces israelii, usually seen in immunocompromised patients or in the background of tissue injury. Cervicofacial actinomycosis presenting as a fixed jaw swelling in an elderly individual can mimic malignancy and pose a diagnostic dilemma. We report here a case of cervicofacial actinomycosis diagnosed by fine needle aspiration, along with a review of the relevant literature. A 60 year-old man presented with a gradually increasing 6 x 5 cm swelling in the left side of his jaw. The swelling was fixed, without any apparent sinus or abscess. Fine needle aspiration was diagnostic as it revealed colonies of actinomyces surrounded by polymorphs and chronic inflammatory cells. The histopathological study of the excised specimen confirmed the cytological findings. Fine needle aspiration is an effective tool in the diagnosis of actinomycosis although its documentation is rare. Difficulties in the management can be avoided by early diagnosis using the fine needle aspiration technique.

Sweeping at the Martin boundary of a fine domain

DEFF Research Database (Denmark)

El Kadiri, Mohamed; Fuglede, Bent

2016-01-01

We study sweeping on a subset of the Riesz-Martin space of a fine domain in R n   (n≥2), both with respect to the natural topology and the minimal-fine topology, and show that the two notions of sweeping are identical.......We study sweeping on a subset of the Riesz-Martin space of a fine domain in R n   (n≥2), both with respect to the natural topology and the minimal-fine topology, and show that the two notions of sweeping are identical....

Fining of glass melts: what we know about fining processes today

NARCIS (Netherlands)

Beerkens, R.G.C.

2009-01-01

The paper addresses the mechanisms of fining (removal of gases from melt) and the effect of batch composition, oxidation state of the melt and furnace atmosphere on bubble removal processes for commercial glass types, such as float glass and container glass compositions. The mechanisms of the

Fine Sprays for Disinfection within Healthcare

Directory of Open Access Journals (Sweden)

G Nasr

2016-09-01

Full Text Available Problems exist worldwide with Hospital Acquired Infections (HAI's. The Spray Research Group (SRG have been working with relevant industries in developing a product which can provide a delivery system for treatment chemicals for surfaces, including the design and testing of a novel Spill-Return Atomiser (SRA for this purpose. A comprehensive description of this atomiser has already been given. This paper reports on a new application of this atomiser and discusses the problem of spray coating for disinfection that has been considered very little in previous work. The related spray coating performance tests in developing the product are thus provided. The experimental work includes determining the required spray duration and the coverage area produced by different sprays, including the analysis of the effects of atomiser positions, configurations, and the required number of atomisers. Comparison is made with the efficacy of an ultrasonic gas atomiser that is currently used for this purpose. The investigation has found that the utilisation of fine sprays (10μm>D32>25μm at high liquid pressure (<12MPa and low flow rates (<0.3 l/min is suitable for surface disinfection in healthcare applications (i.e. MRSA, VRSA etc.

A two-stage treatment for Municipal Solid Waste Incineration (MSWI) bottom ash to remove agglomerated fine particles and leachable contaminants.

Science.gov (United States)

Alam, Qadeer; Florea, M V A; Schollbach, K; Brouwers, H J H

2017-09-01

In this lab study, a two-stage treatment was investigated to achieve the valorization of a municipal solid waste incineration (MSWI) bottom ash fraction below 4mm. This fraction of MSWI bottom ash (BA) is the most contaminated one, containing potentially toxic elements (Cu, Cr, Mo and Sb), chlorides and sulfates. The BA was treated for recycling by separating agglomerated fine particles (≤125µm) and soluble contaminants by using a sequence of sieving and washing. Initially, dry sieving was performed to obtain BA-S (≤125µm), BA-M (0.125-1mm) and BA-L (1-4mm) fractions from the original sample. The complete separation of fine particles cannot be achieved by conventional sieving, because they are bound in a cementitious matrix around larger BA grains. Subsequently, a washing treatment was performed to enhance the liberation of the agglomerated fine particles from the BA-M and BA-L fractions. These fine particles were found to be similar to the particles of BA-S fraction in term of chemical composition. Furthermore, the leaching behavior of Cr, Mo Sb, chlorides and sulfates was investigated using various washing parameters. The proposed treatment for the separation of agglomerated fine particles with dry sieving and washing (L/S 3, 60min) was successful in bringing the leaching of contaminants under the legal limit established by the Dutch environmental norms. Copyright © 2017 Elsevier Ltd. All rights reserved.

SHAPE ANALYSIS OF FINE AGGREGATES USED FOR CONCRETE

OpenAIRE

HE, Huan; Courard, Luc; Pirard, Eric; Michel, Frédéric

2016-01-01

Fine aggregate is one of the essential components in concrete and significantly influences the material properties. As parts of natures, physical characteristics of fine aggregate are highly relevant to its behaviors in concrete. The most of previous studies are mainly focused on the physical properties of coarse aggregate due to the equipment limitations. In this paper, two typical fine aggregates, i.e. river sand and crushed rock, are selected for shape characterization. The new developed d...

Imeilus Fine 5

Index Scriptorium Estoniae

2017-01-01

Vaba Lava teatrikeskuse laval esineb Fine 5 oma lavastusega "Imeilus". Tiina Ollesk ja Renee Nõmmik, tantsulavastuse autorid on koreograafid, õppejõud, lavastajad ja kogemustega tantsijad. 29. jaanuaril korraldavad Tiina Ollesk ja Renee Nõmmik Tallinna Ülikoolis kaasaegse liikumismõtlemise töötoa, mis on pühendatud lavastusele "Imeilus"

Chemical characterization and toxicity assessment of fine particulate matters emitted from the combustion of petrol and diesel fuels.

Science.gov (United States)

Wu, Di; Zhang, Fei; Lou, Wenhao; Li, Dan; Chen, Jianmin

2017-12-15

Fuel consumption is one of the major contributors to air pollution worldwide. Plenty of studies have demonstrated that the diesel and petrol exhaust fine particulate matters (FPMs) are associated with increases of various diseases. However, the influences of different fuel types and their chemical components on toxicity have been less investigated. In this study, four kinds of fuels that widely used in China were burned in a laboratory simulation, and the FPMs were collected and analyzed. Transmission electron microscopy showed that black carbon was mainly soot with a dendritic morphology. For light diesel oil, marine heavy diesel oil, 93 octane petrol and 97 octane petrol diesel oil, the emission factors of FPMs were 3.05±0.29, 3.21±0.54, 2.36±0.33, and 2.28±0.25g/kg fuel, respectively. And the emission factors for the "16 US EPA" PAHs of FPM were 0.45±0.20, 0.80±0.22, 1.00±0.20, and 1.05±0.19mg/g FPMs, respectively. Fe is the most abundant metal in these FPMs, and the emission factors of FPMs were 2.58±1.70, 4.45±0.11, 8.18±0.58, and 9.24±0.17mg/g FPMs, respectively. We ranked the cytotoxicity of the FPMs emission from fuels combustion: marine heavy diesel oil>97 octane petrol>93 octane petrol>light diesel oil, and the genotoxicity of FPMs emission from fuels combustion: marine heavy diesel oil>light diesel oil>93 octane petrol>97 octane petrol. Significant correlations were found between PAH concentrations and reactive oxygen species (ROS) generation. Our results demonstrated that fuels exhaust FPMs have strong association with ROS activity, cytotoxicity and genotoxicity. These results indicated that fuels exhaust FPMs pose a potentially serious health, and emphasized the importance of assessing the health risks posed by the particulate pollutants in vehicle exhausts. Copyright © 2017. Published by Elsevier B.V.

Characterization of self-organized InGaN/GaN quantum dots by Diffraction Anomalous Fine Structure (DAFS)

International Nuclear Information System (INIS)

Piskorska, E.; Holy, V.; Siebert, M.; Schmidt, Th.; Falta, J.; Yamaguchi, T.; Hommel, D.; Renevier, H.

2006-01-01

The local chemical composition of InGaN quantum dots grown by a MBE method on GaN virtual substrates was investigated by x-ray diffraction anomalous fine-structure method. From the detailed numerical analysis of the data we were able to reconstruct the local neighborhood of Ga atoms at different positions in the dots. Using this approach, we found that the In content increases from 20% at the dot base to 40-50% at the top. (author) [pl

Trimethylsilyl derivatives of organic compounds in source samples and in atmospheric fine particulate matter.

Science.gov (United States)

Nolte, Christopher G; Schauer, James J; Cass, Glen R; Simoneit, Bernd R T

2002-10-15

Source sample extracts of vegetative detritus, motor vehicle exhaust, tire dust paved road dust, and cigarette smoke have been silylated and analyzed by GC-MS to identify polar organic compounds that may serve as tracers for those specific emission sources of atmospheric fine particulate matter. Candidate molecular tracers were also identified in atmospheric fine particle samples collected in the San Joaquin Valley of California. A series of normal primary alkanols, dominated by even carbon-numbered homologues from C26 to C32, the secondary alcohol 10-nonacosanol, and some phytosterols are prominent polar compounds in the vegetative detritus source sample. No new polar organic compounds are found in the motor vehicle exhaust samples. Several hydrogenated resin acids are present in the tire dust sample, which might serve as useful tracers for those sources in areas that are heavily impacted by motor vehicle traffic. Finally, the alcohol and sterol emission profiles developed for all the source samples examined in this project are scaled according to the ambient fine particle mass concentrations attributed to those sources by a chemical mass balance receptor model that was previously applied to the San Joaquin Valley to compute the predicted atmospheric concentrations of individual alcohols and sterols. The resulting underprediction of alkanol concentrations at the urban sites suggests that alkanols may be more sensitive tracers for natural background from vegetative emissions (i.e., waxes) than the high molecular weight alkanes, which have been the best previously available tracers for that source.

Fines Classification Based on Sensitivity to Pore-Fluid Chemistry

KAUST Repository

Jang, Junbong

2015-12-28

The 75-μm particle size is used to discriminate between fine and coarse grains. Further analysis of fine grains is typically based on the plasticity chart. Whereas pore-fluid-chemistry-dependent soil response is a salient and distinguishing characteristic of fine grains, pore-fluid chemistry is not addressed in current classification systems. Liquid limits obtained with electrically contrasting pore fluids (deionized water, 2-M NaCl brine, and kerosene) are combined to define the soil "electrical sensitivity." Liquid limit and electrical sensitivity can be effectively used to classify fine grains according to their fluid-soil response into no-, low-, intermediate-, or high-plasticity fine grains of low, intermediate, or high electrical sensitivity. The proposed methodology benefits from the accumulated experience with liquid limit in the field and addresses the needs of a broader range of geotechnical engineering problems. © ASCE.

Fines classification based on sensitivity to pore-fluid chemistry

Science.gov (United States)

Jang, Junbong; Santamarina, J. Carlos

2016-01-01

The 75-μm particle size is used to discriminate between fine and coarse grains. Further analysis of fine grains is typically based on the plasticity chart. Whereas pore-fluid-chemistry-dependent soil response is a salient and distinguishing characteristic of fine grains, pore-fluid chemistry is not addressed in current classification systems. Liquid limits obtained with electrically contrasting pore fluids (deionized water, 2-M NaCl brine, and kerosene) are combined to define the soil “electrical sensitivity.” Liquid limit and electrical sensitivity can be effectively used to classify fine grains according to their fluid-soil response into no-, low-, intermediate-, or high-plasticity fine grains of low, intermediate, or high electrical sensitivity. The proposed methodology benefits from the accumulated experience with liquid limit in the field and addresses the needs of a broader range of geotechnical engineering problems.

Flocculation of chromite ore fines suspension using polysaccharide ...

Indian Academy of Sciences (India)

Unknown

liquid separation. Keywords. Flocculation; graft copolymer; mineral industry effluent; chromite ore fines; ... work well as flocculating agent on coal washery effluent, copper and iron ore fines etc (Karmakar et al 1998, 1999;. Tripathy et al 2001).

Closing remarks at the symposium in honour of Daniel Bellus. Pharmacenter, University of Basel, February 6, 2009.

Science.gov (United States)

Ganter, Camille

2010-01-01

In the Closing Remarks at the Symposium on 'Frontiers in Bioorganic Chemistry' (Friday, February 6, 2009, Pharmacenter, University of Basel) in honour of Daniel Bellus, his arrival in Zürich in fall 1967 and especially his postdoctoral work at the Laboratorium für Organische Chemie at the Eidgenössische Technische Hochschule (ETH) in Zürich throughout the year 1967/68 were mentioned. In his most remarkable paper (published in 1969 in Helv. Chim. Acta), the photochemistry of the alpha,beta-unsaturated cyclohexenones O-acetyl-testosterone and 10-methy-delta1,9-octalon-(2) is described in detail. Change of solvent leads to lowering or increasing of the n,pi*- and (pi,pi*)-triplet energies, resulting in a crossing of the two energy levels. Personal remarks on Daniel Bellus and warmest thanks to him, to Profs. Beat Ernst and Bernd Giese (the organizers of the symposium) and to all the speakers concluded this most special event.

Interaction of fine sediment with alluvial streambeds

Science.gov (United States)

Jobson, Harvey E.; Carey, William P.

1989-01-01

More knowledge is needed about the physical processes that control the transport of fine sediment moving over an alluvial bed. The knowledge is needed to design rational sampling and monitoring programs that assess the transport and fate of toxic substances in surface waters because the toxics are often associated with silt- and clay-sized particles. This technical note reviews some of the past research in areas that may contribute to an increased understanding of the processes involved. An alluvial streambed can have a large capacity to store fine sediments that are extracted from the flow when instream concentrations are high and it can gradually release fine sediment to the flow when the instream concentrations are low. Several types of storage mechanisms are available depending on the relative size distribution of the suspended load and bed material, as well as the flow hydraulics. Alluvial flow tends to segregate the deposited material according to size and density. Some of the storage locations are temporary, but some can store the fine sediment for very long periods of time.

Sub-nanometrically resolved chemical mappings of quantum-cascade laser active regions

International Nuclear Information System (INIS)

Pantzas, Konstantinos; Beaudoin, Grégoire; Patriarche, Gilles; Largeau, Ludovic; Mauguin, Olivia; Sagnes, Isabelle; Pegolotti, Giulia; Vasanelli, Angela; Calvar, Ariane; Amanti, Maria; Sirtori, Carlo

2016-01-01

A procedure that produces sub-nanometrically resolved chemical mappings of MOCVD-grown InGaAs/InAlAs/InP quantum cascade lasers is presented. The chemical mappings reveal that, although the structure is lattice-matched to InP, the InAlAs barriers do not attain the nominal aluminum content—48%—and are, in fact, InGaAlAs quaternaries. This information is used to adjust the aluminum precursor flow and fine-tune the composition of the barriers, resulting in a significant improvement of the fabricated lasers. (paper)

Synchrotron x-ray fluorescence and extended x-ray absorption fine structure analysis

International Nuclear Information System (INIS)

Chen, J.R.; Gordon, B.M.; Hanson, A.L.; Jones, K.W.; Kraner, H.W.; Chao, E.C.T.; Minkin, J.A.

1984-01-01

The advent of dedicated synchrotron radiation sources has led to a significant increase in activity in many areas of science dealing with the interaction of x-rays with matter. Synchrotron radiation provides intense, linearly polarized, naturally collimated, continuously tunable photon beams, which are used to determine not only the elemental composition of a complex, polyatomic, dilute material but also the chemical form of the elements with improved accuracy. Examples of the application of synchrotron radiation include experiments in synchrotron x-ray fluorescence (SXRF) analysis and extended x-ray absorption fine structure (EXAFS) analysis. New synchrotron radiation x-ray microprobes for elemental analysis in the parts per billion range are under construction at several laboratories. 76 references, 24 figures

Fine topology and locally Minkowskian manifolds

Science.gov (United States)

Agrawal, Gunjan; Sinha, Soami Pyari

2018-05-01

Fine topology is one of the several well-known topologies of physical and mathematical relevance. In the present paper, it is obtained that the nonempty open sets of different dimensional Minkowski spaces with the fine topology are not homeomorphic. This leads to the introduction of a new class of manifolds. It turns out that the technique developed here is also applicable to some other topologies, namely, the s-topology, space topology, f-topology, and A-topology.

Susceptibility based upon Chemical Interaction with Disease ...

Science.gov (United States)

One of the challenges facing toxicology and risk assessment is that numerous host and environmental factors may modulate vulnerability and risk. An area of increasing interest is the potential for chemicals to interact with background aging and disease processes, an interaction that may yield cumulative damage, altered chemical potency, and increased disease incidence. This review outlines the interactions possible between chemicals and background disease and identifies the type of information needed to evaluate such interactions. Key among these is the existence of a clinically relevant and easy to measure biomarker of disease risk which allows the identification of vulnerable individuals based upon the level of risk biomarker. The impact of toxic chemicals on this biomarker can then be used to predict how the chemical modifies disease risk as long as related mechanistic and toxicological data are consistent with toxicant effect on the disease process. Several case studies are briefly presented which describe the toxic chemical, the clinical biomarker and the impacted disease including: fine particulate matter/decreased heart rate variability/increased cardiopulmonary events; cadmium/decreased glomerular filtration rate/increased chronic kidney disease; methyl mercury/decreased paraoxonase-1/increased cardiovascular risk; trichloroethylene/increased anti-nuclear antibody/autoimmunity; dioxin/increased CYP1A1/hypertension. These case studies point o

Fine-tuning of electronic properties in donor-acceptor conjugated polymers based on oligothiophenes

Science.gov (United States)

Imae, Ichiro; Sagawa, Hitoshi; Harima, Yutaka

2018-03-01

A novel series of donor-acceptor conjugated polymers having oligothiophenes with well-defined structures were synthesized and their optical, electrochemical, and photovoltaic properties were investigated. It was found that the absorption bands of polymers were red-shifted with increasing number of ethylenedioxy groups added to each oligothiophene unit and that their band edges reached over 1000 nm. The systematical fine-tuning of the electronic properties was achieved using the chemical structures of oligothiophene units. Photovoltaic cells based on polymer/(6,6)-phenyl C61 butyric acid methyl ester (PC61BM) exhibited power conversion efficiencies in the range from 0.004 to 1.10%, reflecting the electronic properties of the polymers.

Interannual variation in the fine-mode MODIS aerosol optical depth and its relationship to the changes in sulfur dioxide emissions in China between 2000 and 2010

Directory of Open Access Journals (Sweden)

S. Itahashi

2012-03-01

Full Text Available Anthropogenic SO₂ emissions increased alongside economic development in China at a rate of 12.7% yr⁻¹ from 2000 to 2005. However, under new Chinese government policy, SO₂ emissions declined by 3.9% yr⁻¹ between 2005 and 2009. Between 2000 and 2010, we found that the variability in the fine-mode (submicron aerosol optical depth (AOD over the oceans adjacent to East Asia increased by 3–8% yr⁻¹ to a peak around 2005–2006 and subsequently decreased by 2–7% yr⁻¹, based on observations by the Moderate Resolution Imaging Spectroradiometer (MODIS on board NASA's Terra satellite and simulations by a chemical transport model. This trend is consistent with ground-based observations of aerosol particles at a mountainous background observation site in central Japan. These fluctuations in SO₂ emission intensity and fine-mode AOD are thought to reflect the widespread installation of fuel-gas desulfurization (FGD devices in power plants in China, because aerosol sulfate is a major determinant of the fine-mode AOD in East Asia. Using a chemical transport model, we confirmed that the contribution of particulate sulfate to the fine-mode AOD is more than 70% of the annual mean and that the abovementioned fluctuation in fine-mode AOD is caused mainly by changes in SO₂ emission rather than by other factors such as varying meteorological conditions in East Asia. A strong correlation was also found between satellite-retrieved SO₂ vertical column density and bottom-up SO₂ emissions, both of which were also consistent with observed fine-mode AOD trends. We propose a simplified approach for evaluating changes in SO₂ emissions in China, combining the use of modeled sensitivity coefficients that describe the variation of fine-mode AOD with changes in SO₂ emissions and satellite retrieval. Satellite measurements of fine-mode AOD

Fine 5 lavastab Venemaal

Index Scriptorium Estoniae

2013-01-01

Tantsuteatru Fine 5 koreograafid Tiina Ollesk ja Rene Nõmmik toovad Jekaterinburgis välja lavastuse "... and Red", esitajaks Venemaa nimekas nüüdistantsutrupp Provintsialnõje Tantsõ. Lavastuses kõlab Taavo Remmeli kontrabassiimprovisatsioon "12.12.2006"

Safety management system in a Swiss chemical company

International Nuclear Information System (INIS)

Vouillamoz, R.

1996-01-01

Through the implementation of the fine chemical strategy, i.e. the manufacture of products with a higher value, the Lonza AG was confronted with a drastic increase of complexity in safety and disposal. In this connection, a concept of risk reduction was developed and carried out. This concept is based on 3 different steps: - prevention, - reduction, - provision. The details of these steps are explained here and illustrated with concrete examples. (author) 5 figs., tabs

Self-compacting fine-grained concretes with compensated shrinkage

Directory of Open Access Journals (Sweden)

Alimov Lev

2017-01-01

Full Text Available This paper substantiates the efficiency of application of fine-grained concrete for erection of cast-in-place concrete and reinforced concrete structures of different purpose. On the basis of analysis of experimental research results it was established that the introduction of microfillers with expansion effect to composite binder allows not only improving the rheological properties of fine-grained concrete, but also decreasing of value of shrinkage strain and improving of concrete crack resistance and durability. The analysis of the results of industrial use of fine-grained concretes with compensated shrinkage is given.

Antitrust Enforcement Under Endogenous Fines and Price-Dependent Detection Probabilities

NARCIS (Netherlands)

Houba, H.E.D.; Motchenkova, E.; Wen, Q.

2010-01-01

We analyze the effectiveness of antitrust regulation in a repeated oligopoly model in which both fines and detection probabilities depend on the cartel price. Such fines are closer to actual guidelines than the commonly assumed fixed fines. Under a constant detection probability, we confirm the

The effect of limited availability of N or water on C allocation to fine roots and annual fine root turnover in Alnus incana and Salix viminalis.

Science.gov (United States)

Rytter, Rose-Marie

2013-09-01

The effect of limited nitrogen (N) or water availability on fine root growth and turnover was examined in two deciduous species, Alnus incana L. and Salix viminalis L., grown under three different regimes: (i) supply of N and water in amounts which would not hamper growth, (ii) limited N supply and (iii) limited water supply. Plants were grown outdoors during three seasons in covered and buried lysimeters placed in a stand structure and filled with quartz sand. Computer-controlled irrigation and fertilization were supplied through drip tubes. Production and turnover of fine roots were estimated by combining minirhizotron observations and core sampling, or by sequential core sampling. Annual turnover rates of fine roots water availability. Fine root production (treatments in Salix; i.e., absolute length and biomass production increased in the order: water limited treatment effects were detected for fine roots 1-2 mm. Proportionally more C was allocated to fine roots (≤2 mm) in N or water-limited Salix; 2.7 and 2.3 times the allocation to fine roots in the unlimited regime, respectively. Estimated input to soil organic carbon increased by ca. 20% at N limitation in Salix. However, future studies on fine root decomposition under various environmental conditions are required. Fine root growth responses to N or water limitation were less pronounced in Alnus, thus indicating species differences caused by N-fixing capacity and slower initial growth in Alnus, or higher fine root plasticity in Salix. A similar seasonal growth pattern across species and treatments suggested the influence of outer stimuli, such as temperature and light.

Shock fabrics in fine-grained micrometeorites

Science.gov (United States)

Suttle, M. D.; Genge, M. J.; Russell, S. S.

2017-10-01

The orientations of dehydration cracks and fracture networks in fine-grained, unmelted micrometeorites were analyzed using rose diagrams and entropy calculations. As cracks exploit pre-existing anisotropies, analysis of their orientation provides a mechanism with which to study the subtle petrofabrics preserved within fine-grained and amorphous materials. Both uniaxial and biaxial fabrics are discovered, often with a relatively wide spread in orientations (40°-60°). Brittle deformation cataclasis and rotated olivine grains are reported from a single micrometeorite. This paper provides the first evidence for impact-induced shock deformation in fine-grained micrometeorites. The presence of pervasive, low-grade shock features in CM chondrites and CM-like dust, anomalously low-density measurements for C-type asteroids, and impact experiments which suggest CM chondrites are highly prone to disruption all imply that CM parent bodies are unlikely to have remained intact and instead exist as a collection of loosely aggregated rubble-pile asteroids, composed of primitive shocked clasts.

Studies on fire and explosion hazards of zircaloy fines

International Nuclear Information System (INIS)

Andriessen, H.; Kroebel, R.; Bereznai, T.; Wurtz, R.; Hattwig, M.; Hensel, W.; Osswald, R.

1987-01-01

To promote the safe handling of the Zry-fines arising in a reprocessing plant, an experimental program was conducted under which the fire and explosion hazards were assessed. In order to evaluate the effect of irradiation on the ignition and explosion properties, irradiated and unirradiated Zry-fines, generated with the same tool, were investigated and compared which each other. Irradiated Zry-fines exhibit a higher fire and explosion hazard than non-irradiated fines passing the same sieve. These differences are caused mainly by the irradiation induced embrittlement and hardening of the Zry-hulls. On account of these different physical properties the generated fines have got a finer grain size due to a more spherical shape resulting in a higher bulk density and a lower mean value. These secondary irradiation effects seem to determine the lower minimum ignition temperatures and the higher values for the maximum explosion pressure and rate of pressure rise

Edge separation using diffraction anomalous fine structure

International Nuclear Information System (INIS)

Ravel, B.; Bouldin, C.E.; Renevier, H.; Hodeau, J.L.; Berar, J.F.

1999-01-01

We exploit the crystallographic sensitivity of the Diffraction Anomalous Fine-Structure (DAFS) measurement to separate the fine structure contributions of different atomic species with closely spaced resonant energies. In BaTiO 3 the Ti K edge and Ba Lm edges are separated by 281 eV, or about 8.2 Angstrom -1 ), thus severely limiting the information content of the Ti K edge signal. Using the site selectivity of DAFS we can separate the two fine structure spectra using an iterative Kramers-Kronig method, thus extending the range of the Ti K edge spectrum. This technique has application to many rare earth/transition metal compounds, including many magnetic materials of technological significance for which K and L edges overlap in energy. (au)

Benjamin Ortmeyer: Mythos und Pathos statt Logos und Ethos, Zu den Publikationen führender Erziehungswissenschaftler in der NS-Zeit: Eduard Spranger, Herman Nohl, Erich Weniger und Peter Petersen, Weinheim / Basel: Beltz 2009 [Rezension

OpenAIRE

Zimmer, Hasko

2010-01-01

Rezension von: Benjamin Ortmeyer: Mythos und Pathos statt Logos und Ethos, Zu den Publikationen führender Erziehungswissenschaftler in der NS-Zeit: Eduard Spranger, Herman Nohl, Erich Weniger und Peter Petersen, Weinheim / Basel: Beltz 2009, 606 S.

Chemical characterization and sources of personal exposure to fine particulate matter (PM2.5) in the megacity of Guangzhou, China.

Science.gov (United States)

Chen, Xiao-Cui; Jahn, Heiko J; Engling, Guenter; Ward, Tony J; Kraemer, Alexander; Ho, Kin-Fai; Yim, S H L; Chan, Chuen-Yu

2017-12-01

Concurrent ambient and personal measurements of fine particulate matter (PM 2.5 ) were conducted in eight districts of Guangzhou during the winter of 2011. Personal-to-ambient (P-C) relationships of PM 2.5 chemical components were determined and sources of personal PM 2.5 exposures were evaluated using principal component analysis and a mixed-effects model. Water-soluble inorganic ions (e.g., SO 4 2- , NO 3 - , NH 4 + , C 2 O 4 2- ) and anhydrosugars (e.g., levoglucosan, mannosan) exhibited median personal-to-ambient (P/C) ratios personal PM 2.5 were significantly affected by ambient sources. Conversely, elemental carbon (EC) and calcium (Ca 2+ ) showed median P/C ratios greater than unity, illustrating significant impact of local traffic, indoor sources, and/or personal activities on individual's exposure. SO 4 2- displayed very low coefficient of divergence (COD) values coupled with strong P-C correlations, implying a uniform distribution of SO 4 2- in the urban area of Guangzhou. EC, Ca 2+ , and levoglucosan were otherwise heterogeneously distributed across individuals in different districts. Regional air pollution (50.4 ± 0.9%), traffic-related particles (8.6 ± 0.7%), dust-related particles (5.8 ± 0.7%), and biomass burning emissions (2.0 ± 0.2%) were moderate to high positive sources of personal PM 2.5 exposure in Guangzhou. The observed positive and significant contribution of Ca 2+ to personal PM 2.5 exposure, highlighting indoor sources and/or personal activities, were driving factors determining personal exposure to dust-related particles. Considerable discrepancies (COD values ranging from 0.42 to 0.50) were shown between ambient concentrations and personal exposures, indicating caution should be taken when using ambient concentrations as proxies for personal exposures in epidemiological studies. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effect of bond characteristics between steel slag fine aggregate and cement paste on mechanical properties of concrete and mortar

International Nuclear Information System (INIS)

Yuji, W.

1988-01-01

The ordinary fine aggregate in concrete has been replaced by ground and sieved steel slag fine aggregate, treated and exposed to air for three months. Compared with concrete made from natural sand, properties such as compressive strength, flexural strength, elastic modules, permeability and abrasion resistance are considerably improved. The improvement increases with a decrease in w/c ratio, an increase in curing time and an increase in the replacement weight of sand. These results are due to the fact that the steel slag contains some active minerals such as C/sub 3/S, C/sub 2/S, C/sub 4/AF, etc., and shows favorable surface physical characteristics that improve the bond between steel slag particles and cement paste. The results of XRD, SEM and EPM microhardness showed that there are heavier concentration of ions, with finer crystals and a lower degree of CH orientation at the interfacial zone between steel slag particles and cement paste. The study also found small cementitious and fibrous C-S-H crystals growing from the fine aggregate, which are linked with hydrated products form cement paste making the bond and structural characteristic more favorable with cement. The steel slag fine aggregate is an active mineral similar to cement. The bond between the aggregate and cement paste is strengthened both physically and chemically

A fine art

Energy Technology Data Exchange (ETDEWEB)

Schnabel, G.; Raaff, T. [Andritz AG (Austria)

2006-07-15

The paper describes a new dewatering system for coal fines which challenges established processes by using screenbowl centrifuge and hyperbaric filter combinations. Company acquisitions over the past three to four years enabled Andritz AG to develop a new system combining two technologies. The article describes the benefits of the combination process and explains the basic operation of these machines. 4 figs.

Acoustic fine structure may encode biologically relevant information for zebra finches.

Science.gov (United States)

Prior, Nora H; Smith, Edward; Lawson, Shelby; Ball, Gregory F; Dooling, Robert J

2018-04-18

The ability to discriminate changes in the fine structure of complex sounds is well developed in birds. However, the precise limit of this discrimination ability and how it is used in the context of natural communication remains unclear. Here we describe natural variability in acoustic fine structure of male and female zebra finch calls. Results from psychoacoustic experiments demonstrate that zebra finches are able to discriminate extremely small differences in fine structure, which are on the order of the variation in acoustic fine structure that is present in their vocal signals. Results from signal analysis methods also suggest that acoustic fine structure may carry information that distinguishes between biologically relevant categories including sex, call type and individual identity. Combined, our results are consistent with the hypothesis that zebra finches can encode biologically relevant information within the fine structure of their calls. This study provides a foundation for our understanding of how acoustic fine structure may be involved in animal communication.

Martin Boundary of a Fine Domain and a Fatou-Naïm-Doob Theorem for Finely Superharmonic Functions

DEFF Research Database (Denmark)

El Kadiri, Mohamed; Fuglede, Bent

2016-01-01

We construct the Martin compactification U ¯ ¯ ¯ ¯    of a fine domain U in R n (n = 2) and the Riesz-Martin kernel K on U×U ¯ ¯ ¯ ¯    . We obtain the integral representation of finely superharmonic fonctions ≥ 0 on U in terms of K and establish the Fatou-Naim-Doob theorem in this setting....

Chemical kinetics of Cs species in an alkali-activated municipal solid waste incineration fly ash and pyrophyllite-based system using Cs K-edge in situ X-ray absorption fine structure analysis

Science.gov (United States)

Shiota, Kenji; Nakamura, Takafumi; Takaoka, Masaki; Nitta, Kiyofumi; Oshita, Kazuyuki; Fujimori, Takashi; Ina, Toshiaki

2017-05-01

We conducted in situ X-ray absorption fine structure (in situ XAFS) analysis at the Cs K-edge to investigate the chemical kinetics of Cs species during reaction in an alkali-activated municipal solid waste incineration fly ash (MSWIFA) and pyrophyllite-based system. Understanding the kinetics of Cs is essential to the design of appropriate conditions for Cs stabilization. In situ XAFS analysis of four pastes, prepared from NaOHaq, sodium silicate solution, pyrophyllite, and MSWIFA with the addition of CsCl, was conducted in custom-built reaction cells at four curing temperatures (room temperature, 60 °C, 80 °C, 105 °C) for approximately 34 h. The results indicated that the change in Cs species during reaction at room temperature was small, while changes at higher temperatures were faster and more extreme, with the fastest conversion to pollucite occurring at 105 °C. Further analysis using a leaching test and a simple reaction model for Cs species during reaction showed that the pollucite formation rate was dependent on the curing temperature and had a significant negative correlation with Cs leaching. The activation energy of pollucite formation was estimated to be 31.5 kJ/mol. These results revealed that an important change in the chemical state of Cs occurs during reaction in the system.

Numerical modeling of fine particle fractal aggregates in turbulent flow

Directory of Open Access Journals (Sweden)

Cao Feifeng

2015-01-01

Full Text Available A method for prediction of fine particle transport in a turbulent flow is proposed, the interaction between particles and fluid is studied numerically, and fractal agglomerate of fine particles is analyzed using Taylor-expansion moment method. The paper provides a better understanding of fine particle dynamics in the evolved flows.

Chemical characterization of fine particulate matter emitted by peat fires in Central Kalimantan, Indonesia, during the 2015 El Niño

Directory of Open Access Journals (Sweden)

T. Jayarathne

2018-02-01

Full Text Available Fine particulate matter (PM2.5 was collected in situ from peat smoke during the 2015 El Niño peat fire episode in Central Kalimantan, Indonesia. Twenty-one PM samples were collected from 18 peat fire plumes that were primarily smoldering with modified combustion efficiency (MCE values of 0.725–0.833. PM emissions were determined and chemically characterized for elemental carbon (EC, organic carbon (OC, water-soluble OC, water-soluble ions, metals, and organic species. Fuel-based PM2.5 mass emission factors (EFs ranged from 6.0 to 29.6 g kg−1 with an average of 17.3 ± 6.0 g kg−1. EC was detected only in 15 plumes and comprised  ∼ 1 % of PM mass. Together, OC (72 %, EC (1 %, water-soluble ions (1 %, and metal oxides (0.1 % comprised 74 ± 11 % of gravimetrically measured PM mass. Assuming that the remaining mass is due to elements that form organic matter (OM; i.e., elements O, H, N an OM-to-OC conversion factor of 1.26 was estimated by linear regression. Overall, chemical speciation revealed the following characteristics of peat-burning emissions: high OC mass fractions (72 %, primarily water-insoluble OC (84 ± 11 %C, low EC mass fractions (1 %, vanillic to syringic acid ratios of 1.9, and relatively high n-alkane contributions to OC (6.2 %C with a carbon preference index of 1.2–1.6. Comparison to laboratory studies of peat combustion revealed similarities in the relative composition of PM but greater differences in the absolute EF values. The EFs developed herein, combined with estimates of the mass of peat burned, are used to estimate that 3.2–11 Tg of PM2.5 was emitted to atmosphere during the 2015 El Niño peatland fire event in Indonesia. Combined with gas-phase measurements of CO2, CO, CH4, and volatile organic carbon from Stockwell et al. (2016, it is determined that OC and EC accounted for 2.1 and 0.04 % of total carbon emissions, respectively. These in situ EFs can be used to

Chemical characterization of fine particulate matter emitted by peat fires in Central Kalimantan, Indonesia, during the 2015 El Niño

Science.gov (United States)

Jayarathne, Thilina; Stockwell, Chelsea E.; Gilbert, Ashley A.; Daugherty, Kaitlyn; Cochrane, Mark A.; Ryan, Kevin C.; Putra, Erianto I.; Saharjo, Bambang H.; Nurhayati, Ati D.; Albar, Israr; Yokelson, Robert J.; Stone, Elizabeth A.

2018-02-01

Fine particulate matter (PM2.5) was collected in situ from peat smoke during the 2015 El Niño peat fire episode in Central Kalimantan, Indonesia. Twenty-one PM samples were collected from 18 peat fire plumes that were primarily smoldering with modified combustion efficiency (MCE) values of 0.725-0.833. PM emissions were determined and chemically characterized for elemental carbon (EC), organic carbon (OC), water-soluble OC, water-soluble ions, metals, and organic species. Fuel-based PM2.5 mass emission factors (EFs) ranged from 6.0 to 29.6 g kg-1 with an average of 17.3 ± 6.0 g kg-1. EC was detected only in 15 plumes and comprised ∼ 1 % of PM mass. Together, OC (72 %), EC (1 %), water-soluble ions (1 %), and metal oxides (0.1 %) comprised 74 ± 11 % of gravimetrically measured PM mass. Assuming that the remaining mass is due to elements that form organic matter (OM; i.e., elements O, H, N) an OM-to-OC conversion factor of 1.26 was estimated by linear regression. Overall, chemical speciation revealed the following characteristics of peat-burning emissions: high OC mass fractions (72 %), primarily water-insoluble OC (84 ± 11 %C), low EC mass fractions (1 %), vanillic to syringic acid ratios of 1.9, and relatively high n-alkane contributions to OC (6.2 %C) with a carbon preference index of 1.2-1.6. Comparison to laboratory studies of peat combustion revealed similarities in the relative composition of PM but greater differences in the absolute EF values. The EFs developed herein, combined with estimates of the mass of peat burned, are used to estimate that 3.2-11 Tg of PM2.5 was emitted to atmosphere during the 2015 El Niño peatland fire event in Indonesia. Combined with gas-phase measurements of CO2, CO, CH4, and volatile organic carbon from Stockwell et al. (2016), it is determined that OC and EC accounted for 2.1 and 0.04 % of total carbon emissions, respectively. These in situ EFs can be used to improve the

Discordance Rate between Thyroid Fine Needle Aspiration Cytology ...

African Journals Online (AJOL)

Discordance Rate between Thyroid Fine Needle Aspiration Cytology and Histopathologic Diagnosis. Wondwossen Ergete, Daniel Abebe. Abstract. Fine Needle Aspiration (FNA) of the thyroid is a low cost procedure, which can give an accurate diagnosis promptly. The objective of this study was to assess the diagnostic ...

Sustainable Production of Fine Chemicals and Materials Using Nontoxic Renewable Sources.

Science.gov (United States)

Kokel, Anne; Török, Béla

2018-02-01

Due to declining hydrocarbon resources and strengthening environmental regulations, significant attention is directed toward sustainable and nontoxic supplies for the development of green technologies in a variety of industries. This account provides an overview on the sources and recent applications of such materials surveying the most common nontoxic and renewable resources that can be obtained from biological sources. Developing a broad array of technologies based on these materials would establish a truly sustainable green chemical industry. The study thematically discusses various compound groups, eg, carbohydrates, proteins, and triglycerides (oils). Since often the monomers or building blocks of these biopolymers are of significant importance and produced in large amounts, the applications of these compounds are also reviewed. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Towards gloss control in fine art reproduction

Science.gov (United States)

Baar, Teun; Brettel, Hans; Ortiz Segovia, Maria V.

2015-03-01

The studies regarding fine art reproduction mainly focus on the accuracy of colour and the recreation of surface texture properties. Since reflection properties other than colour are neglected, important details of the artwork are lost. For instance, gloss properties, often characteristic to painters and particular movements in the history of art, are not well reproduced. The inadequate reproduction of the different gloss levels of a piece of fine art leads to a specular reflection mismatch in printed copies with respect to the original works that affects the perceptual quality of the printout. We used different print parameters of a 3D high resolution printing setup to control the gloss level on a printout locally. Our method can be used to control gloss automatically and in crucial applications such as fine art reproduction.

A precision study of the fine tuning in the DiracNMSSM

International Nuclear Information System (INIS)

Kaminska, Anna; Ross, Graham G.; Staub, Florian; Bonn Univ.

2014-01-01

Recently the DiracNMSSM has been proposed as a possible solution to reduce the fine tuning in supersymmetry. We determine the degree of fine tuning needed in the DiracNMSSM with and without non-universal gaugino masses and compare it with the fine tuning in the GNMSSM. To apply reasonable cuts on the allowed parameter regions we perform a precise calculation of the Higgs mass. In addition, we include the limits from direct SUSY searches and dark matter abundance. We find that both models are comparable in terms of fine tuning, with the minimal fine tuning in the GNMSSM slightly smaller.

Fine and coarse elemental components in the urban aerosol of Sao Paulo, Brazil

International Nuclear Information System (INIS)

Boueres, L.C.S.; Orsini, C.M.Q.

1981-01-01

Using cascade impactor sampling and PIXE analysis we have measured particle size distributions for approximately 15 elements in the Sao Paulo urban atmosphere. These elements, in our case, may be classified, according to their occurrence in fine or coarse aerosol log-normal modes, into three groups: (a) soil dust reference elements (coarse particle mode): Ti, Si and Ca; (b) anthropogenic fine particle mode: Zn, Br and Pb; and (c) mixed bimodal elements: S, K, V, Cr, Mn, Ni, Cu and Fe. All of the soil dust reference elements show consistently the log-normal parameters MMAD approx. 5.5 μm and sigmasub(g) approx. 3.2 (mass median aerodynamic diameter and geometric standard deviation, respectively). Enrichment factor calculations for Ti, Si, Ca and K in the coarse particle fraction (> 2 μmad), relative to Fe and the standard crustal aerosol values of Lawson and Winchester, show that Ti and Si are mainly soil derived while Ca and K may have significant industrial components in this particle fraction (i.e. coarse mode). The fine mode parameters for the other elements show variations with element suggesting different air pollution sources (such as motor vehicles, resuspended dust, refuse burning, industrial activities, etc.) and/or different chemical pathways, which presumably could be identifiable. For example, the modal parameters for group (b) are: Zn, MMAD = 0.9 μm, sigmasub(g) = 2.2; Br, MMAD = 0.5 μm, sigmasub(g) = 4.0; Pb, MMAD = 0.6 μm, sigmasub(g) = 3.0; thus suggesting a common source (automotive) for Br and Pb, unrelated to the source of Zn (possibly refuse burning). (orig.)

76 FR 31307 - Commission of Fine Arts; Notice of Meeting

Science.gov (United States)

2011-05-31

... COMMISSION OF FINE ARTS Commission of Fine Arts; Notice of Meeting The next meeting of the U.S. Commission of Fine Arts is scheduled for June 16, 2011, at 10 a.m. in the Commission offices at the National Building Museum,Suite 312, Judiciary Square, 401 F Street, NW., Washington, DC, 20001-2728. Items of...

49 CFR 107.336 - Limitation on fines and penalties.

Science.gov (United States)

2010-10-01

... MATERIALS PROGRAM PROCEDURES Enforcement Criminal Penalties § 107.336 Limitation on fines and penalties. If a State or political subdivision or Indian tribe assesses any fine or penalty determined by the...

Seasonal variation and chemical characterization of PM2.5 in northwestern Philippines

Science.gov (United States)

Bagtasa, Gerry; Cayetano, Mylene G.; Yuan, Chung-Shin

2018-04-01

The seasonal and chemical characteristics of fine particulate matter (PM2.5) were investigated in Burgos, Ilocos Norte, located at the northwestern edge of the Philippines. Each 24 h sample of fine aerosol was collected for four seasons. Fine particulate in the region shows strong seasonal variation in both concentration and composition. Highest mass concentration was seen during the boreal spring season with a mean mass concentration of 21.6 ± 6.6 µg m-3, and lowest was in fall with a mean concentration of 8.4 ± 2.3 µg m-3. Three-day wind back trajectory analysis of air mass reveals the influence of the northwestern Pacific monsoon regimes on PM2.5 concentration. During southwest monsoon, sea salt was the dominant component of fine aerosols carried by moist air from the South China Sea. During northeast monsoon, on the other hand, both wind and receptor model analysis showed that higher particulate concentration was due to the long-range transport (LRT) of anthropogenic emissions from northern East Asia. Overall, sea salt and soil comprise 33 % of total PM2.5 concentration, while local biomass burning makes up 33 %. LRT of industrial emission, solid waste burning and secondary sulfate from East Asia have a mean contribution of 34 % to the total fine particulate for the whole sampling period.

Selecting the Best: Evolutionary Engineering of Chemical Production in Microbes

DEFF Research Database (Denmark)

Shepelin, Denis; Hansen, Anne Sofie Lærke; Lennen, Rebecca

2018-01-01

, we focus primarily on a more challenging problem-the use of evolutionary engineering for improving the production of chemicals in microbes directly. We describe recent developments in evolutionary engineering strategies, in general, and discuss, in detail, case studies where production of a chemical......Microbial cell factories have proven to be an economical means of production for many bulk, specialty, and fine chemical products. However, we still lack both a holistic understanding of organism physiology and the ability to predictively tune enzyme activities in vivo, thus slowing down rational...... engineering of industrially relevant strains. An alternative concept to rational engineering is to use evolution as the driving force to select for desired changes, an approach often described as evolutionary engineering. In evolutionary engineering, in vivo selections for a desired phenotype are combined...

Production of fine powder from silk by radiation

International Nuclear Information System (INIS)

Takeshita, Hidefumi; Yoshii, Fumio; Kume, Tamikazu

2000-01-01

Silk fine power was prepared directly from silk fiber irradiated with an accelerated electron beam(EB). Irradiated silk fiber was well pulverized only by physical crushing using ball mill without any chemical pretreatment. Raw and degummed silk fibers were irradiated at ambient temperature in the dose range of 250-1000 kGy. Although unirradiated silk fibers were not pulverized at all, irradiated fibers were easily pulverized and showed higher conversion from fiber to powder for higher doses. The presence of oxygen in the irradiation atmosphere enhanced pulverization of silk fiber. Raw silk fibers were less pulverized compared to degummed ones. The electron microscope observation showed that the minimum particle size of silk powder obtained from fiber irradiated by 1000 kGy in oxygen was less than 10 microns. It was found that fibroin powder obtained in this work dissolved remarkably into cold water, thought unirradiated fibroin fiber had little solubility even in hot water. A typical soluble fraction was about 60% for fibroin powder obtained from fiber irradiated by 1000 kGy in oxygen. (author)

Production of fine powder from silk by radiation

Energy Technology Data Exchange (ETDEWEB)

Takeshita, Hidefumi; Yoshii, Fumio; Kume, Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Ishida, Kazunari; Kamiishi, Youichi [Textile Research Institute of Gunma, Kiryu, Gunma (Japan)

2000-03-01

Silk fine power was prepared directly from silk fiber irradiated with an accelerated electron beam(EB). Irradiated silk fiber was well pulverized only by physical crushing using ball mill without any chemical pretreatment. Raw and degummed silk fibers were irradiated at ambient temperature in the dose range of 250-1000 kGy. Although unirradiated silk fibers were not pulverized at all, irradiated fibers were easily pulverized and showed higher conversion from fiber to powder for higher doses. The presence of oxygen in the irradiation atmosphere enhanced pulverization of silk fiber. Raw silk fibers were less pulverized compared to degummed ones. The electron microscope observation showed that the minimum particle size of silk powder obtained from fiber irradiated by 1000 kGy in oxygen was less than 10 microns. It was found that fibroin powder obtained in this work dissolved remarkably into cold water, thought unirradiated fibroin fiber had little solubility even in hot water. A typical soluble fraction was about 60% for fibroin powder obtained from fiber irradiated by 1000 kGy in oxygen. (author)

Relations between Playing Activities and Fine Motor Development

Science.gov (United States)

Suggate, Sebastian; Stoeger, Heidrun; Pufke, Eva

2017-01-01

Children's fine motor skills (FMS) are being increasingly recognized as an important aspect of preschool development; yet, we know very little about the experiences that foster their development. We utilized a parent-administered children's fine and gross motor activities questionnaire (MAQ) to investigate links with FMS. We recruited a sample of…

Ultrasound-Guided Fine Needle Aspiration Biopsy of the Thyroid

Science.gov (United States)

... Physician Resources Professions Site Index A-Z Ultrasound-Guided Fine Needle Aspiration Biopsy of the Thyroid An ... Aspiration Biopsy of the Thyroid? What is Ultrasound-Guided Fine Needle Aspiration Biopsy of the Thyroid? During ...

Fine root production at drained peatland sites

Energy Technology Data Exchange (ETDEWEB)

Finer, L [Finnish Forest Research Inst. (Finland). Joensuu Research Station; Laine, J [Helsinki Univ. (Finland). Dept. of Forest Ecology

1997-12-31

The preliminary results of the Finnish project `Carbon balance of peatlands and climate change` show that fine roots play an important role in carbon cycling on peat soils. After drainage the roots of mire species are gradually replaced by the roots of trees and other forest species. Pine fine root biomass reaches a maximum level by the time of crown closure, some 20 years after drainage on pine mire. The aim of this study is to compare the results of the sequential coring method and the ingrowth bag method used for estimating fine root production on three drained peatland sites of different fertility. The results are preliminary and continuation to the work done in the study Pine root production on drained peatlands, which is part of the Finnish project `Carbon cycling on peatlands and climate change`. In this study the fine root biomass was greater on the poor site than on the rich sites. Pine fine root production increased with the decrease in fertility. Root turnover and the production of field layer species were greater on the rich sites than on the poor site. The results suggested that the in growth bag method measured more root activity than the magnitude of production. More than two growing seasons would have been needed to balance the root dynamics in the in growth bags with the surrounding soil. That time would probably have been longer on the poor site than on the rich ones and longer for pine and field layer consisting of dwarf shrubs than for field layer consisting of sedge like species and birch. (11 refs.)

Fine root production at drained peatland sites

Energy Technology Data Exchange (ETDEWEB)

Finer, L. [Finnish Forest Research Inst. (Finland). Joensuu Research Station; Laine, J. [Helsinki Univ. (Finland). Dept. of Forest Ecology

1996-12-31

The preliminary results of the Finnish project `Carbon balance of peatlands and climate change` show that fine roots play an important role in carbon cycling on peat soils. After drainage the roots of mire species are gradually replaced by the roots of trees and other forest species. Pine fine root biomass reaches a maximum level by the time of crown closure, some 20 years after drainage on pine mire. The aim of this study is to compare the results of the sequential coring method and the ingrowth bag method used for estimating fine root production on three drained peatland sites of different fertility. The results are preliminary and continuation to the work done in the study Pine root production on drained peatlands, which is part of the Finnish project `Carbon cycling on peatlands and climate change`. In this study the fine root biomass was greater on the poor site than on the rich sites. Pine fine root production increased with the decrease in fertility. Root turnover and the production of field layer species were greater on the rich sites than on the poor site. The results suggested that the in growth bag method measured more root activity than the magnitude of production. More than two growing seasons would have been needed to balance the root dynamics in the in growth bags with the surrounding soil. That time would probably have been longer on the poor site than on the rich ones and longer for pine and field layer consisting of dwarf shrubs than for field layer consisting of sedge like species and birch. (11 refs.)

Agglomeration of coal fines for premium fuel application

International Nuclear Information System (INIS)

Atalay, A.; Zaman, M.D.

1992-01-01

This paper reports on fine coal in liquid suspension, which can be agglomerated in a number of ways. One of the oldest procedures involves the addition of electrolyte to the suspension to cause a reduction in the zeta potential and allow colliding particles to agglomerate. A second method involves the use of polymeric flocculants to bridge between particles. Both of these technologies are being used in the wastewater treatment plants for removal of fine waste particles from contaminated water. A third method involves the addition of a second immiscible liquid preferentially to wet the particles and cause adhesion by capillary interfacial forces. While the bonding forces in the first two methods are small and result in rather weak and voluminous agglomerates, the third method is postulated to produce more dense and much stronger agglomerates. In the case of fine coals, the carbonaceous constituents can be agglomerated and recovered from the aqueous suspension with many different coagulants. Inorganic or ash-forming constituents are also agglomerated along with the fine coal particles. As the froth floatation, agglomeration using coal and colloidal dust to effect a separation. Froth floatation, however, becomes less effective where extremely fine particles of cal must be treated or if there is considerable clay-size particle present. In contrast, there appears to be virtually no lower limit on the particle size suitable for agglomeration uses

Coupling fine particle and bedload transport in gravel-bedded streams

Science.gov (United States)

Park, Jungsu; Hunt, James R.

2017-09-01

Fine particles in the silt- and clay-size range are important determinants of surface water quality. Since fine particle loading rates are not unique functions of stream discharge this limits the utility of the available models for water quality assessment. Data from 38 minimally developed watersheds within the United States Geological Survey stream gauging network in California, USA reveal three lines of evidence that fine particle release is coupled with bedload transport. First, there is a transition in fine particle loading rate as a function of discharge for gravel-bedded sediments that does not appear when the sediment bed is composed of sand, cobbles, boulders, or bedrock. Second, the discharge at the transition in the loading rate is correlated with the initiation of gravel mobilization. Third, high frequency particle concentration and discharge data are dominated by clockwise hysteresis where rising limb discharges generally have higher concentrations than falling limb discharges. These three observations across multiple watersheds lead to a conceptual model that fine particles accumulate within the sediment bed at discharges less than the transition and then the gravel bed fluidizes with fine particle release at discharges above the transition discharge. While these observations were individually recognized in the literature, this analysis provides a consistent conceptual model based on the coupling of fine particle dynamics with filtration at low discharges and gravel bed fluidization at higher discharges.

Magnetic resonance cholangiopancreatography. The fine art of bilio-pancreatic imaging.

Science.gov (United States)

Adamek, H E; Breer, H; Layer, G; Riemann, J F

2002-01-01

With the introduction of endoscopic retrograde cholangio-pancreatography in the early 1970s, gastroenterologists have a lot of diagnostic options in the biliopancreatic system to their disposal. Meanwhile, magnetic resonance cholangiopancreatography (MRCP) has become a competitive replacement for diagnostic ERCP with the advantage of avoiding complications related to endoscopic techniques. Mounting evidence suggests that both MRCP and MRI (magnetic resonance imaging) have a profound influence of diagnostic algorithms in a variety of hepatobiliary and pancreatic diseases. Copyright 2002 S. Karger AG, Basel and IAP

Comparison between wire mesh and plate electrodes during Wide-pattern machining on invar fine sheet using through-mask electrochemical micromachining

Energy Technology Data Exchange (ETDEWEB)

Chun, Kwang-ho; Jin, Da-som; Kim, Seong-hyun; Lee, Eun-sang [Inha University, Incheon (Korea, Republic of)

2017-04-15

Many research on the fabrication of Organic light emitting diodes (OLED) shadow masks with high resolution have been carried out because of the development of the smart-display industry. It is the parts of display panel which has millions of micro holes on invar (Fe- Ni) fine sheet. Various techniques such as laser machining, chemical etching and Electrochemical micro-machining (EMM) are used to produce micro-hole arrays. In this study, Through-mask electrochemical machining (TMEMM) combine with portion of photolithography process was applied to fabricate micro-hole arrays on invar fine sheet. The sheet was coated with dry film photoresist. Two types of electrode, plate and mesh, was used to compare the influence of electrode type. The sheet was coated with dry film photoresist with micro- sized through holes. The results were compared in regard to uniformity and taper angle. Compared with the plate electrode, the mesh electrode has better uniformity and taper angle which is important criteria of OLED shadow mask. These results could be used to improve TMEMM for invar fine sheet when it is applied to fabricate micro-hole arrays and help to obtain optical uniformity and desired taper angles.

Development and Validation of an Aquatic Fine Sediment Biotic Index

Science.gov (United States)

Relyea, Christina D.; Minshall, G. Wayne; Danehy, Robert J.

2012-01-01

The Fine Sediment Biotic Index (FSBI) is a regional, stressor-specific biomonitoring index to assess fine sediment (Plecoptera (5), Trichoptera (3), and Ephemeroptera (2) contained all but one of the species or species groups classified as extremely sensitive. Index validation with an independent data set of 255 streams found FSBI scores to accurately predict both high and low levels of measured fine sediment.

Finely divided, irradiated tetrafluorethylene polymers

International Nuclear Information System (INIS)

Brown, M.T.; Rodway, W.G.

1977-01-01

Dry non-sticky fine lubricant powders are made by γ-irradiation of unsintered coagulated dispersion grade tetrafluoroethylene polymers. These powders may also be dispersed in an organic medium for lubricating purposes

Fine sediment erodibility in Lake Okeechobee, Florida

OpenAIRE

Mehta, Ashish J.; Hwang, Kyu-Nam

1989-01-01

The critical need to predict the turbidity in water due to fine-grained sediment suspension under wave action over mud deposits for sedimentation and erosion studies, as well as sorbed contaminant transport, is well known. Since fall velocities of fine sediment particles are very small, they can be easily transported by hydrodynamic flows such as waves and currents. The presence of these particles in the water column affects accoustic transmission, heat absorption and depth of ...

Effective flocculation of fine mineral suspensions using Moringa oleifera seeds

Energy Technology Data Exchange (ETDEWEB)

Pickett, T.M. [Bureau of Mines, Reno, NV (United States)

1995-12-31

The purpose of this research was to investigate the feasibility of using Moringa oleifera seeds, or the active components of the seeds, in the clarification of waters containing suspended mineral fines. In comparative testing using a hematite suspension, the flocculating activity of Moringa oleifera seeds was better than alum. Twenty milligrams of seed powder was sufficient to clarify the hematite to near zero turbidity, while the same amount of alum had a minimal effect on turbidity. Extracts were prepared from the seeds in an attempt to separate the proteins. A crude protein extract was enriched by lowering the pH to 6.0. Only 0.08 mg/L of the enriched extract was required to flocculate a minusil suspension. Environmentally friendly protein flocculants could theoretically be produced and enhanced with recombinant DNA techniques as an alternative to chemical flocculants currently used in water treatment.

Study of fine films nature on the surface of copper band by photoelectron spectroscopy method

International Nuclear Information System (INIS)

Reznichenko, K.N.; Fedorov, V.N.; Shevakin, Yu.F.

1983-01-01

The composition of surface films formed on the copper band of industrial production under atmospheric conditions, its changes in thickness and determination of chemical state of the above films are studied. It has been found by the methods of X-ray photoelectronic and Auger-spectroscopy that defect formations on the surface of the copper band of industrial production represent copper oxides in the form of fine films, their change in colour from blue to dark blue probably is determined by different thickness of these defects. The said films on copper have practically identical chemical composition characterized by the presence of unequally valent copper, oxygen in various states (adsorbed and in the form of oxides), carbon and iron. By means of chemical shifts of the line Cu 2psub(3/2) and Ol s the presence in the external part of the film of CuO copper oxide is established and nearer to the interface surface film-metal-of Cu 2 O cuprous oxide which indicates a two-layer surface film structure. The presence of adsorbed carbon and iron in the film composition is a result of surface contamination

Fine 5 kolib Kumu lavale

Index Scriptorium Estoniae

2006-01-01

Kumu kunstimuuseumi auditooriumis toimub 21. veebruaril Fine 5 kaasaegse tantsu etendus "Panus". Esinevad Tiina Ollesk, Irina Pähn, žonglöör Dimitri Kruus, disainer Rain Saukas ja muusik Mattias Siitan

Nitramine Drying & Fine Grinding Facility

Data.gov (United States)

Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

Fine structure of charge exchange lines observed in laboratory plasmas

Energy Technology Data Exchange (ETDEWEB)

Ida, K.; Nishimura, S. [National Inst. for Fusion Science, Nagoya (Japan); Kondo, K.

1997-01-01

The influence of the fine structure of charge exchange lines appears only at the plasma edge or in the recombining phase where the ion temperature is low enough. The observed spectra in Li III and C VI are consistent with the sum of fine-structure components populated by statistical weights (assuming complete l-mixing) not by direct charge exchange cross sections. Some discrepancy was observed in the intensity ratio of fine-structure components between the observation and calculation for C VI in the recombining phase. The fine-structure of charge exchange lines gives an apparent Doppler shift in plasma rotation velocity measurement using charge exchange spectroscopy. (author)

Flotation mechanisms of molybdenite fines by neutral oils

Science.gov (United States)

Lin, Qing-quan; Gu, Guo-hua; Wang, Hui; Liu, You-cai; Fu, Jian-gang; Wang, Chong-qing

2018-01-01

The flotation mechanisms of molybdenite fines by neutral oils were investigated through microflotation test, turbidity measurements, infrared spectroscopy, and interfacial interaction calculations. The results of the flotation test show that at pH 2-11, the floatability of molybdenite fines in the presence of transformer oil is markedly better than that in the presence of kerosene and diesel oil. The addition of transformer oil, which enhances the floatability of molybdenite fines, promotes the aggregation of molybdenite particles. Fourier transform infrared measurements illustrate that physical interaction dominates the adsorption mechanism of neutral oil on molybdenite. Interfacial interaction calculations indicate that hydrophobic attraction is the crucial force that acts among the oil collector, water, and molybdenite. Strong hydrophobic attraction between the oily collector and water provides the strong dispersion capability of the collector in water. Furthermore, the dispersion capability of the collector, not the interaction strength between the oily collectors and molybdenite, has a highly significant role in the flotation system of molybdenite fines. Our findings provide insights into the mechanism of molybdenite flotation.

Handwriting and fine motor problems after treatment for acute lymphoblastic leukemia

NARCIS (Netherlands)

Reinders-Messelink, H.A.; Schoemaker, M.M.; Goeken, L.N H; van den Briel, M.M.; Kamps, W.A; Simner, M L; Leedham, C G; Thomassen, A J W M

1996-01-01

Fine motor skills and handwriting performance were investigated in 17 children at least two years after treatment for acute lymphoblastic leukemia. It was hypothesized that as a late effect of vincristine neuropathy, children would still have fine motor and/or handwriting problems. Gross and fine

36 CFR 401.6 - Approval by National Commission of Fine Arts.

Science.gov (United States)

2010-07-01

... Commission of Fine Arts. 401.6 Section 401.6 Parks, Forests, and Public Property AMERICAN BATTLE MONUMENTS COMMISSION MONUMENTS AND MEMORIALS § 401.6 Approval by National Commission of Fine Arts. A design for a... Commission of Fine Arts before the Commission can accept it. ...

Stabilization of Black Cotton Soil Using Micro-fine Slag

Science.gov (United States)

Shukla, Rajesh Prasad; Parihar, Niraj Singh

2016-09-01

This work presents the results of laboratory tests conducted on black cotton soil mixed with micro-fine slag. Different proportions of micro-fine slag, i.e., 3, 6, 9, 12 and 15 % were mixed with the black cotton soil to improve soil characteristics. The improvement in the characteristics of stabilized soil was assessed by evaluating the changes in the physical and strength parameters of the soil, namely, the Atterberg limits, free swell, the California Bearing Ratio (CBR), compaction parameters and Unconfined Compressive Strength (UCS). The mixing of micro-fine slag decreases the liquid limit, plasticity index and Optimum Moisture Contents (OMC) of the soil. Micro-fine slag significantly increases the plastic limit, UCS and CBR of the soil up to 6-7 % mixing, but mixing of more slag led to decrease in the UCS and CBR of the soil. The unsoaked CBR increased by a substantial amount unlike soaked CBR value. The swell potential of the soil is reduced from medium to very low. The optimum amount of micro-fine slag is found to be approximately 6-7 % by the weight of the soil.

Synthesis of ultra-fine porous tin oxide fibres and its process characterization

International Nuclear Information System (INIS)

Wang Yu; Ramos, Idalia; Santiago-Aviles, Jorge J

2007-01-01

Porous rutile-structured SnO 2 fibres, with their length of several millimetres, diameter from 100 nm to 40 μm and potentials for sensor applications, were synthesized from a precursor solution of poly(ethylene oxide) (PEO), chloroform (CHCl 3 ) and dimethyldineodecanoate tin (C 22 H 44 O 4 Sn) using electrospinning and metal-organic decomposition techniques. Fourier-transform infrared spectroscopy, thermogravimetric and differential thermal analysis and x-ray diffraction were used to characterize the synthesized fibres so as to reveal the series of physical and chemical changes occurring from the starting chemicals to the final product of ultra-fine SnO 2 fibres: the solvent CHCl 3 evaporates during the electrospinning; the organic groups in PEO and C 22 H 44 O 4 Sn decompose, with Sn-C bond in C 22 H 44 O 4 Sn replaced by Sn-O between 220 and 300 deg. C, and the atomic arrangement transforms into the genesis of a rutile-type lattice between 300 and 380 deg. C; the incipient lattice finally develops into the rutile structure during heat treatment at higher temperatures up to 600 deg. C

Lime stabilization of fine-grained sediments in western Greenland

DEFF Research Database (Denmark)

Jørgensen, Anders Stuhr; Ingeman-Nielsen, Thomas; Skels, Peteris

2011-01-01

Thick deposits of fine-grained marine sediments exist in large areas of western Greenland. Many places these sediments are located above sea-level, and now complicate construction projects in urban areas. The mineralogy of the fine-grained sediments is very different from European sediments, mainly...... due to the cold climate, and it is therefore of great interest to study possible methods to improve the stability and strength properties. This project includes laboratory studies of lime stabilization on fine-grained marine sediments from Kangerlussuaq, western Greenland. The results have included...

Fines Classification Based on Sensitivity to Pore-Fluid Chemistry

KAUST Repository

Jang, Junbong; Santamarina, Carlos

2015-01-01

The 75-μm particle size is used to discriminate between fine and coarse grains. Further analysis of fine grains is typically based on the plasticity chart. Whereas pore-fluid-chemistry-dependent soil response is a salient and distinguishing

The fine-structure constant before quantum mechanics

International Nuclear Information System (INIS)

Kragh, Helge

2003-01-01

This paper focuses on the early history of the fine-structure constant, largely the period until 1925. Contrary to what is generally assumed, speculations concerning the interdependence of the elementary electric charge and Planck's constant predated Arnold Sommerfeld's 1916 discussion of the dimensionless constant. This paper pays particular attention to a little known work from 1914 in which G N Lewis and E Q Adams derived what is effectively a numerical expression for the fine-structure constant

Numerical simulation of fine oil sand tailings drying in test cells

NARCIS (Netherlands)

Vardon, P.J.; Nijssen, T.; Yao, Y.; Van Tol, A.F.

2014-01-01

As a promising technology in disposal of mature fine tailings (MFT), atmospheric fines drying (AFD) is currently being implemented on a commercial scale at Shell Canada’s Muskeg River Mine near Fort McMurray, Alberta. AFD involves the use of a polymer flocculent to bind fine particles in MFT

Fine structure transitions in Fe XIV

Science.gov (United States)

Nahar, Sultana N.

2013-07-01

Results are reported for Fe XIV energy levels and transitions obtained from the ab initio relativistic Breit-Pauli R-matrix (BPRM) method. BPRM method developed under the Iron Project is capable of calculating very large number of fine structure energy levels and corresponding transitions. However, unlike in the atomic structure calculations, where levels are identified spectroscopically based on the leading percentage contributions of configurations, BPRM is incapable of such identification of the levels and hence the transitions. The main reason for it is that the percentage contributions can not be determined exactly from the large number of channels in the R-matrix space. The present report describes an identification method that uses considerations of quantum defects of channels, contributions of channel from outer regions, Hund's rule, and angular momenta algebra for addition and completeness of fine structure components. The present calculations are carried out using a close coupling wave function expansion that included 26 core excitations from configurations 2s22p63s2, 2s22p63s3p,2s22p63p2,2s22p63s3d, and 2s22p63p3d. A total of 1002 fine structure levels with n ⩽ 10, l⩽9, and 0.5 ⩽J⩽ 9.5 with even and odd parities and the corresponding 130,520 electric dipole allowed (E1) fine structure transitions, a most complete set for astrophysical modelings of spectral analysis and opacities, is presented. Large number of new energy levels are found and identified. The energies agree very well, mostly in less than 1% with the highest being 1.9%, with the 68 observed fine structure levels. While the high lying levels may have some uncertainty, an overall accuracy of energy levels should be within 10%. BPRM transitions have been benchmarked with the existing most accurate calculated transition probabilities with very good agreement for most cases. Based on the accuracy of the method and comparisons, most of the transitions can be rated with A (⩽10%) to C (�

Dispersibility of lactose fines as compared to API in dry powders for inhalation.

Science.gov (United States)

Thalberg, Kyrre; Åslund, Simon; Skogevall, Marcus; Andersson, Patrik

2016-05-17

This work investigates the dispersion performance of fine lactose particles as function of processing time, and compares it to the API, using Beclomethasone Dipropionate (BDP) as model API. The total load of fine particles is kept constant in the formulations while the proportions of API and lactose fines are varied. Fine particle assessment demonstrates that the lactose fines have higher dispersibility than the API. For standard formulations, processing time has a limited effect on the Fine Particle Fraction (FPF). For formulations containing magnesium stearate (MgSt), FPF of BDP is heavily influenced by processing time, with an initial increase, followed by a decrease at longer mixing times. An equation modeling the observed behavior is presented. Surprisingly, the dispersibility of the lactose fines present in the same formulation remains unaffected by mixing time. Magnesium analysis demonstrates that MgSt is transferred to the fine particles during the mixing process, thus lubrication both BDP and lactose fines, which leads to an increased FPF. Dry particle sizing of the formulations reveals a loss of fine particles at longer mixing times. Incorporation of fine particles into the carrier surfaces is believed to be behind this, and is hence a mechanism of importance as regards the dispersion performance of dry powders for inhalation. Copyright © 2016 Elsevier B.V. All rights reserved.

Fine-art gifted pupils in art classes

OpenAIRE

Vogrin, Oto

2011-01-01

Fine arts gift is an inborn quality yet the potential can easily be wasted if not developed. The development of a child’s gift is affected by his/her surroundings and conditions, adapted to an individual’s needs. Among the individual capabilities of fine arts gifted student our special attention goes to the ones which an individual uses to assimilate his/her experience and reactions to it, to visual memory, manual skills and aesthetic intelligence. They all enable us to determine aesthetic va...

Fine root architecture of nine North American trees

Science.gov (United States)

Kurt S. Pregitzer; Jared L. DeForest; Andrew J. Burton; Michael F. Allen; Roger W. Ruess; Ronald L. Hendrick

2002-01-01

The fine roots of trees are concentrated on lateral branches that arise from perennial roots. They are important in the acquisition of water and essential nutrients, and at the ecosystem level, they make a significant contribution to biogeochemical cycling. Fine roots have often been studied according to arbitrary size classes, e.g., all roots less than 1 or 2 mm in...

[Evaluation of Cellular Effects Caused by Lunar Regolith Simulant Including Fine Particles].

Science.gov (United States)

Horie, Masanori; Miki, Takeo; Honma, Yoshiyuki; Aoki, Shigeru; Morimoto, Yasuo

2015-06-01

The National Aeronautics and Space Administration has announced a plan to establish a manned colony on the surface of the moon, and our country, Japan, has declared its participation. The surface of the moon is covered with soil called lunar regolith, which includes fine particles. It is possible that humans will inhale lunar regolith if it is brought into the spaceship. Therefore, an evaluation of the pulmonary effects caused by lunar regolith is important for exploration of the moon. In the present study, we examine the cellular effects of lunar regolith simulant, whose components are similar to those of lunar regolith. We focused on the chemical component and particle size in particular. The regolith simulant was fractionated to lunar regolith simulant such as cell membrane damage, induction of oxidative stress and proinflammatory effect.

Comparison of Fine Needle Aspiration and Fine Needle Nonaspiration Cytology of Thyroid Nodules: A Meta-Analysis

Directory of Open Access Journals (Sweden)

Hongming Song

2015-01-01

Full Text Available Background. Fine needle aspiration cytology (FNAC and fine needle nonaspiration cytology (FNNAC are useful cost-effective techniques for preoperatively assessing thyroid lesions. Both techniques have advantages and disadvantages, and there is controversy over which method is superior. This meta-analysis was performed to evaluate the differences between FNAC and FNNAC for diagnosis of thyroid nodules. Methods. Primary publications were independently collected by two reviewers from PubMed, Web of Science, Google Scholar, EBSCO, OALib, and the Cochrane Library databases. The following search terms were used: fine needle, aspiration, capillary, nonaspiration, sampling without aspiration, thyroid, and cytology. The last search was performed on February 1, 2015. Results. Sixteen studies comprising 1,842 patients and 2,221 samples were included in this study. No statistically significant difference was observed between FNAC and FNNAC groups with respect to diagnostically inadequate smears, diagnostically superior smears, diagnostic performance (accuracy, sensitivity, specificity, negative predictive value, and positive predictive value, area under the summary receiver operating characteristic curve, average score of each parameter (background blood or clot, amount of cellular material, degree of cellular degeneration, degree of cellular trauma, and retention of appropriate architecture, and total score of five parameters. Conclusion. FNAC and FNNAC are equally useful in assessing thyroid nodules.

ÜLKEMİZDE KOBİLER VE FİNANSAL KURUMLAR AÇISINDAN BASEL SÜRECİNİN DEĞERLENDİRİLMESİ

OpenAIRE

ÇOBAN ÇELİKDEMİR, Neşe

2011-01-01

Basel II düzenlemeleri bankacılık sektörünün yanı sıra işletmeleri de yakından ilgilendirmektedir. Düşük risk ağırlığına sahip işletmeler, bankalardan düşük maliyetli kredi kullanma olanağına sahip olurken, yüksek riskli işletmeler ise kredi bulmakta zorlanacaklardır. Burada özellikle küçük ve orta ölçekli işletmelerin (KOBİ) durumu önem arz etmektedir. Türkiye’deki işletmelerin %99’unu oluşturan, istihdamın büyük bir kesimini kapsayan, ekonomik büyüme ve ihracata önemli derecede katkı sağlay...

Revisiting the effects of hydrodynamic sorting and sedimentary recycling on chemical weathering indices

Science.gov (United States)

Guo, Yulong; Yang, Shouye; Su, Ni; Li, Chao; Yin, Ping; Wang, Zhongbo

2018-04-01

Although the proxies based on elemental geochemistry of siliciclastic sediments have been well developed to indicate the intensity of chemical weathering in various catchments, their geological indications and limitations, and especially how the differentiation of minerals and sediment grain size influences the applications of these proxies needs more clarification. This paper investigates the interactive effects of weathering, hydraulic sorting and sedimentary recycling on river sediment chemistry, and further validates the application of various weathering indices by measuring mineralogical and geochemical compositions of bank sediments and suspended particulate matters (SPMs) from five rivers in East China bearing various sizes, geologic settings and climatic regimes. For a specific river, the silicate weathering intensity registered in the fine SPMs is systematically stronger than that in the coarse-grained bank sediments. Most of the weathering indices not only reflect the integrated weathering history of various catchments but also depend on hydraulic sorting effect during sediment transport and depositional processes. The correlation between CIA (chemical index of alteration) and WIP (weathering index of Parker) offers an approach to predict the weathering trends of the fine SPMs, coarse bank sediments and recycled sediments under the influence of quartz dilution. To minimize the effects of hydrodynamic sorting and sedimentary recycling, we suggest that the fine sediments (e.g. SPMs and <2 μm fraction of bank sediments) in rivers can better reflect the average of present-day weathering crust in catchments and the weathered terrigenous materials into marginal seas and oceans.

The effect of amblyopia on fine motor skills in children.

Science.gov (United States)

Webber, Ann L; Wood, Joanne M; Gole, Glen A; Brown, Brian

2008-02-01

In an investigation of the functional impact of amblyopia in children, the fine motor skills of amblyopes and age-matched control subjects were compared. The influence of visual factors that might predict any decrement in fine motor skills was also explored. Vision and fine motor skills were tested in a group of children (n = 82; mean age, 8.2 +/- 1.7 [SD] years) with amblyopia of different causes (infantile esotropia, n = 17; acquired strabismus, n = 28; anisometropia, n = 15; mixed, n = 13; and deprivation n = 9), and age-matched control children (n = 37; age 8.3 +/- 1.3 years). Visual motor control (VMC) and upper limb speed and dexterity (ULSD) items of the Bruininks-Oseretsky Test of Motor Proficiency were assessed, and logMAR visual acuity (VA) and Randot stereopsis were measured. Multiple regression models were used to identify the visual determinants of fine motor skills performance. Amblyopes performed significantly poorer than control subjects on 9 of 16 fine motor skills subitems and for the overall age-standardized scores for both VMC and ULSD items (P multiple regression model that took into account the intercorrelation between visual characteristics, poorer fine motor skills performance was associated with strabismus (F(1,75) = 5.428; P = 0.022), but not with the level of binocular function, refractive error, or visual acuity in either eye. Fine motor skills were reduced in children with amblyopia, particularly those with strabismus, compared with control subjects. The deficits in motor performance were greatest on manual dexterity tasks requiring speed and accuracy.

POC-scale testing of an advanced fine coal dewatering equipment/technique

Energy Technology Data Exchange (ETDEWEB)

Groppo, J.G.; Parekh, B.K. [Univ. of Kentucky, Lexington, KY (United States); Rawls, P. [Department of Energy, Pittsburgh, PA (United States)

1995-11-01

Froth flotation technique is an effective and efficient process for recovering of ultra-fine (minus 74 {mu}m) clean coal. Economical dewatering of an ultra-fine clean coal product to a 20 percent level moisture will be an important step in successful implementation of the advanced cleaning processes. This project is a step in the Department of Energy`s program to show that ultra-clean coal could be effectively dewatered to 20 percent or lower moisture using either conventional or advanced dewatering techniques. As the contract title suggests, the main focus of the program is on proof-of-concept testing of a dewatering technique for a fine clean coal product. The coal industry is reluctant to use the advanced fine coal recovery technology due to the non-availability of an economical dewatering process. in fact, in a recent survey conducted by U.S. DOE and Battelle, dewatering of fine clean coal was identified as the number one priority for the coal industry. This project will attempt to demonstrate an efficient and economic fine clean coal slurry dewatering process.

Impact of PAC Fines in Fouling of Polymeric and Ceramic Low-Pressure Membranes for Drinking Water Treatment

Science.gov (United States)

Oligny, Laurent; Bérubé, Pierre R.; Barbeau, Benoit

2016-01-01

This study assessed the issue of membrane fouling in a Hybrid Membrane Process (HMP) due to the export of powdered activated carbon (PAC) fines from a pretreatment contactor. Two parallel pilot-scale ceramic and polymeric membranes were studied. Reversible and irreversible foulings were measured following three cleaning procedures: Physical backwashing (BW), chemically enhanced backwashing (CEB) and Clean-in-Place (CIP). The impacts on fouling of membrane type, operation flux increase and the presence/absence of the PAC pretreatment were investigated. Membranes without pretreatment were operated in parallel as a control. In addition, CIP washwaters samples were analyzed to measure organic and inorganic foulants removed from the membranes. It was observed that for the polymeric membranes, fouling generally increased with the presence of the PAC pretreatment because of the export of fines. On the contrary, the ceramic membranes were not significantly impacted by their presence. The analysis of CIP washwaters showed a greater total organic carbon (TOC) content on membranes with a PAC pretreatment while no similar conclusion could be made for inorganic foulants. PMID:27399788

Impact of PAC Fines in Fouling of Polymeric and Ceramic Low-Pressure Membranes for Drinking Water Treatment.

Science.gov (United States)

Oligny, Laurent; Bérubé, Pierre R; Barbeau, Benoit

2016-07-07

This study assessed the issue of membrane fouling in a Hybrid Membrane Process (HMP) due to the export of powdered activated carbon (PAC) fines from a pretreatment contactor. Two parallel pilot-scale ceramic and polymeric membranes were studied. Reversible and irreversible foulings were measured following three cleaning procedures: Physical backwashing (BW), chemically enhanced backwashing (CEB) and Clean-in-Place (CIP). The impacts on fouling of membrane type, operation flux increase and the presence/absence of the PAC pretreatment were investigated. Membranes without pretreatment were operated in parallel as a control. In addition, CIP washwaters samples were analyzed to measure organic and inorganic foulants removed from the membranes. It was observed that for the polymeric membranes, fouling generally increased with the presence of the PAC pretreatment because of the export of fines. On the contrary, the ceramic membranes were not significantly impacted by their presence. The analysis of CIP washwaters showed a greater total organic carbon (TOC) content on membranes with a PAC pretreatment while no similar conclusion could be made for inorganic foulants.

Impact of PAC Fines in Fouling of Polymeric and Ceramic Low-Pressure Membranes for Drinking Water Treatment

Directory of Open Access Journals (Sweden)

Laurent Oligny

2016-07-01

Full Text Available This study assessed the issue of membrane fouling in a Hybrid Membrane Process (HMP due to the export of powdered activated carbon (PAC fines from a pretreatment contactor. Two parallel pilot-scale ceramic and polymeric membranes were studied. Reversible and irreversible foulings were measured following three cleaning procedures: Physical backwashing (BW, chemically enhanced backwashing (CEB and Clean-in-Place (CIP. The impacts on fouling of membrane type, operation flux increase and the presence/absence of the PAC pretreatment were investigated. Membranes without pretreatment were operated in parallel as a control. In addition, CIP washwaters samples were analyzed to measure organic and inorganic foulants removed from the membranes. It was observed that for the polymeric membranes, fouling generally increased with the presence of the PAC pretreatment because of the export of fines. On the contrary, the ceramic membranes were not significantly impacted by their presence. The analysis of CIP washwaters showed a greater total organic carbon (TOC content on membranes with a PAC pretreatment while no similar conclusion could be made for inorganic foulants.

Soft sensor for real-time cement fineness estimation.

Science.gov (United States)

Stanišić, Darko; Jorgovanović, Nikola; Popov, Nikola; Čongradac, Velimir

2015-03-01

This paper describes the design and implementation of soft sensors to estimate cement fineness. Soft sensors are mathematical models that use available data to provide real-time information on process variables when the information, for whatever reason, is not available by direct measurement. In this application, soft sensors are used to provide information on process variable normally provided by off-line laboratory tests performed at large time intervals. Cement fineness is one of the crucial parameters that define the quality of produced cement. Providing real-time information on cement fineness using soft sensors can overcome limitations and problems that originate from a lack of information between two laboratory tests. The model inputs were selected from candidate process variables using an information theoretic approach. Models based on multi-layer perceptrons were developed, and their ability to estimate cement fineness of laboratory samples was analyzed. Models that had the best performance, and capacity to adopt changes in the cement grinding circuit were selected to implement soft sensors. Soft sensors were tested using data from a continuous cement production to demonstrate their use in real-time fineness estimation. Their performance was highly satisfactory, and the sensors proved to be capable of providing valuable information on cement grinding circuit performance. After successful off-line tests, soft sensors were implemented and installed in the control room of a cement factory. Results on the site confirm results obtained by tests conducted during soft sensor development. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Relationship between Overall Debt, Taxation and the Basel Index in Major Financial Institutions in Brazil

Directory of Open Access Journals (Sweden)

Paulo César de Melo Mendes

2016-04-01

Full Text Available Research regarding the capital structure of banks points to the regulatory minimum capital requirement established by the Basel agreements as its main determinant. For other kinds of enterprise, capital structure is pointed to by several theories as a tax planning alternative, since the use of debt allows tax savings. Given the debt characteristics of banks, which prevent the deduction of interest in the calculation of income taxes and thus prevent tax savings through debt, the use of capital structure for tax planning by financial institutions is less evident. In view of this, in addition to contributing to research on the determinants of the capital structure of banks, this study has the objective of examining the relationship between overall debt, taxation and the BIS ratio of financial institutions located in Brazil. The initial sample consisted of the 50 largest banks, identified by the criterion of net income in 2012; but due to lack of availability of information and adjustments made to assure the efficacy of the study, the final sample was made up of 34 financial institutions. The baseline for analysis was the mean values of data from 2010 to 2012 and data were analyzed using correlation analysis and multiple linear regression. No relationship was found between taxation and banks' overall indebtedness. However, influence of the regulatory minimum capital requirement on the capital structure of financial institutions was observed.

Berry's Phase and Fine Structure

CERN Document Server

Binder, B

2002-01-01

Irrational numbers can be assigned to physical entities based on iterative processes of geometric objects. It is likely that iterative round trips of vector signals include a geometric phase component. If so, this component will couple back to the round trip frequency or path length generating an non-linear feedback loop (i.e. induced by precession). In this paper such a quantum feedback mechanism is defined including generalized fine structure constants in accordance with the fundamental gravitomagnetic relation of spin-orbit coupling. Supported by measurements, the general relativistic and topological background allows to propose, that the deviation of the fine structure constant from 1/137 could be assigned to Berry's phase. The interpretation is straightforward: spacetime curvature effects can be greatly amplified by non-linear phase-locked feedback-loops adjusted to single-valued phase relationships in the quantum regime.

Compressive behavior of fine sand.

Energy Technology Data Exchange (ETDEWEB)

Martin, Bradley E. (Air Force Research Laboratory, Eglin, FL); Kabir, Md. E. (Purdue University, West Lafayette, IN); Song, Bo; Chen, Wayne (Purdue University, West Lafayette, IN)

2010-04-01

The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trends were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.

Screening preschool children for fine motor skills: environmental influence.

Science.gov (United States)

Comuk-Balci, Nilay; Bayoglu, Birgul; Tekindal, Agah; Kerem-Gunel, Mintaze; Anlar, Banu

2016-03-01

[Purpose] The aim of this study was to investigate the influence of gender and family factors on performance in the fine motor domain of the Denver II developmental screening test. [Subjects and Methods] Data were obtained from 2038 healthy children, 999 boys (49%) and 1039 girls (51%) in four age groups: 0-24 months (57%), 25-40 months (21.1%), 41-56 months (10.4%), and 57-82 months (11.5%). [Results] Female gender, higher maternal age, especially in children older than 24 months, and higher maternal education were associated with earlier accomplishment of fine motor items. Higher socioeconomic status was correlated with fine motor skills more noticeably at young ages. [Conclusion] The results of this study support the role of environmental factors in the interpretation of fine motor test results and point to target groups for intervention, such as infants in the low socioeconomic group and preschool children of less educated mothers. Studies in different populations may reveal particular patterns that affect child development.

Efficiency of Micro-fine Cement Grouting in Liquefiable Sand

International Nuclear Information System (INIS)

Mirjalili, Mojtaba; Mirdamadi, Alireza; Ahmadi, Alireza

2008-01-01

In the presence of strong ground motion, liquefaction hazards are likely to occur in saturated cohesion-less soils. The risk of liquefaction and subsequent deformation can be reduced by various ground improvement methods including the cement grouting technique. The grouting method was proposed for non-disruptive mitigation of liquefaction risk at developed sites susceptible to liquefaction. In this research, a large-scale experiment was developed for assessment of micro-fine cement grouting effect on strength behavior and liquefaction potential of loose sand. Loose sand samples treated with micro-fine grout in multidirectional experimental model, were tested under cyclic and monotonic triaxial loading to investigate the influence of micro-fine grout on the deformation properties and pore pressure response. The behavior of pure sand was compared with the behavior of sand grouted with a micro-fine cement grout. The test results were shown that cement grouting with low concentrations significantly decreased the liquefaction potential of loose sand and related ground deformation

Chemical and Physical Interactions of Martian Surface Material

Science.gov (United States)

Bishop, J. L.

1999-09-01

A model of alteration and maturation of the Martian surface material is described involving both chemical and physical interactions. Physical processes involve distribution and mixing of the fine-grained soil particles across the surface and into the atmosphere. Chemical processes include reaction of sulfate, salt and oxidizing components of the soil particles; these agents in the soils deposited on rocks will chew through the rock minerals forming coatings and will bind surface soils together to form duricrust deposits. Formation of crystalline iron oxide/oxyhydroxide minerals through hydrothermal processes and of poorly crystalline and amorphous phases through palagonitic processes both contribute to formation of the soil particles. Chemical and physical alteration of these soil minerals and phases contribute to producing the chemical, magnetic and spectroscopic character of the Martian soil as observed by Mars Pathfinder and Mars Global Surveyor. Minerals such as maghemite/magnetite and jarosite/alunite have been observed in terrestrial volcanic soils near steam vents and may be important components of the Martian surface material. The spectroscopic properties of several terrestrial volcanic soils containing these minerals have been analyzed and evaluated in terms of the spectroscopic character of the surface material on Mars.

Evolución e impacto de la regulación bancaria internacional hasta Basilea III: el caso de América Latina = Evolution and impact of international banking regulation until Basel III: The case of Latin America

Directory of Open Access Journals (Sweden)

Cristina Gutiérrez López

2013-12-01

Full Text Available La crisis financiera ha cuestionado la efectividad de los Acuerdos de Basilea como herramienta de regulación y supervisión bancaria a nivel internacional, especialmente por la coincidencia temporal de Basilea II y los problemas del sector bancario. En el caso de América Latina, esto se une tanto a las particularidades de su sistema financiero, que ha afrontado reformas muy significativas en los últimos años, como a la forma diferencial en que la crisis financiera se ha manifestado.El artículo revisa las características del esquema de regulación bancaria internacional hasta llegar al nuevo Acuerdo de Basilea III y su previsible adaptación al caso latinoamericano, con especial interés sobre los efectos en la financiación y prociclicidad.The financial crisis has questioned Basel Accords effectiveness as regulatory and supervisory tools in the international banking area, especially because Basel II was firstly applied when banking problems started. In the Latin America case, this happens in a particular financial system, which has suffered significant reforms over the last years, and where the financial crisis has behaved in a different way.The paper analyses the main characteristics of the international banking regulatory framework until current Basel III Accord. It also addresses its foreseeable adaptation to the Latin American context, with special emphasis on funding and pro-cyclicality

Sources and Chemical Composition of Atmospheric Fine Particles in Rabigh, Saudi Arabia

Science.gov (United States)

Nayebare, S. R.; Aburizaiza, O. S.; Siddique, A.; Hussain, M. M.; Zeb, J.; Khwaja, H. A.

2014-12-01

Air pollution research in Saudi Arabia and the whole of Middle East is at its inception, making air pollution in the region a significant problem. This study presents the first detailed data on fine particulate matter (PM2.5) concentrations of Black Carbon (BC), ions, and trace metals at Rabigh, Saudi Arabia, and assesses their sources. Results showed several characteristic aspects of air pollution at Rabigh. Daily levels of PM2.5 and BC showed significant temporal variability ranging from 12.2 - 75.9 µg/m3 and 0.39 - 1.31 µg/m3, respectively. More than 90% of the time, the daily PM2.5 exceeded the 24 h WHO guideline of 20 µg/m3. Sulfate, NO3-, and NH4+ dominated the identifiable components. Trace metals with significantly higher concentrations included Si, S, Ca, Al, Fe, Na, Cl, Mg, K, and Ti, with average concentrations of 3.1, 2.2, 1.6, 1.2, 1.1, 0.7, 0.7, 0.5, 0.4 and 0.1 µg/m3, respectively. Based on the Air Quality Index (AQI), there were 44% days of moderate air quality, 33% days of unhealthy air quality for sensitive groups, and 23% days of unhealthy air quality throughout the study period. Two categories of aerosol trace metal sources were defined: anthropogenic (S, V, Cr, Ni, Cu, Zn, Br, Cd, Sb, and Pb) and naturally derived elements (Si, Al, and Fe). The extent of anthropogenic contribution was estimated by the degree of enrichment of these elements compared to the crustal composition. Soil resuspension and/or mobilization is an important source of "natural" elements, while "anthropogenic" elements originate primarily from fossil fuel combustion and industries. Ni and V correlated strongly pointing to combustion of heavy fuel oil as the likely source. A positive matrix factorization (PMF) was used to obtain information about possible sources. Our study highlights the need for stringent laws on PM2.5 emission control to protect human health and the environment.

Ordinary mode auroral kilometric radiation fine structure observed by DE 1

International Nuclear Information System (INIS)

Benson, R.F.; Mellott, M.M.; Huff, R.L.; Gurnett, D.A.

1988-01-01

The fine structure observed with intense right-hand extraordinary (R-X) mode auroral kilometric radiation (AKR) has received major theoretical attention. Data from the Dynamics Explorer 1 plasma wave instrument indicate that left-hand ordinary (L-O) mode AKR posses similar fine structure. Several theories have been proposed to explain the fine structure of the R-X mode AKR. In order to account for the L-O mode fine structure, these theories will have to be modified to produce the L-O mode directly or will have to rely on mode conversion processes from the R-X to the L-O mode

Fine motor skills in children with prenatal alcohol exposure or fetal alcohol spectrum disorder.

Science.gov (United States)

Doney, Robyn; Lucas, Barbara R; Jones, Taryn; Howat, Peter; Sauer, Kay; Elliott, Elizabeth J

2014-01-01

Prenatal alcohol exposure (PAE) can cause fetal alcohol spectrum disorders (FASD) and associated neurodevelopmental impairments. It is uncertain which types of fine motor skills are most likely to be affected after PAE or which assessment tools are most appropriate to use in FASD diagnostic assessments. This systematic review examined which types of fine motor skills are impaired in children with PAE or FASD; which fine motor assessments are appropriate for FASD diagnosis; and whether fine motor impairments are evident at both "low" and "high" PAE levels. A systematic review of relevant databases was undertaken using key terms. Relevant studies were extracted using a standardized form, and methodological quality was rated using a critical appraisal tool. Twenty-four studies met inclusion criteria. Complex fine motor skills, such as visual-motor integration, were more frequently impaired than basic fine motor skills, such as grip strength. Assessment tools that specifically assessed fine motor skills more consistently identified impairments than those which assessed fine motor skills as part of a generalized neurodevelopmental assessment. Fine motor impairments were associated with "moderate" to "high" PAE levels. Few studies reported fine motor skills of children with "low" PAE levels, so the effect of lower PAE levels on fine motor skills remains uncertain. Comprehensive assessment of a range of fine motor skills in children with PAE is important to ensure an accurate FASD diagnosis and develop appropriate therapeutic interventions for children with PAE-related fine motor impairments.

Shrinkage and swelling properties of flocculated mature fine tailings

NARCIS (Netherlands)

Yao, Y.; Van Tol, A.F.; Van Paassen, L.A.; Vardon, P.J.

2014-01-01

In the atmospheric fines drying technique, mature fine tailings (MFT) are treated with polymers and deposited in thin layers on a sloped surface for sub-aerial drying. During the whole drying period, the tailings deposits can experience rewetting during periods of rainy weather or as result of the

Studies on the visualization of the fine relief of the colon

International Nuclear Information System (INIS)

Persigehl, M.; Niemann, G.; Klose, K.C.

1983-01-01

The possibility of visualizing the fine relief of the colon was examined by studying human intestinal segments removed post mortem. The visualization depends, among other things, on the extent of expansion of the colon wall. The visualization of the fine relief structure becomes progressively poorer, the greater the extension of the wall. This might indicate that fold formation of the mucosa through a state of contraction of the tunica mucosa is done of the responsible factors for the visualization of the fine relief structures. The article discusses, apart from this factor, the course of the vessels as an anatomical basic pattern determining the manifestation of the fine relief structure; for this purpose, the course of the vessels in the intestine of the dog was visualized by intra-arterial contrast medium injection and then compared with the human fine relief. (orig.) [de

Degradation of non-vulcanized natural rubber - renewable resource for fine chemicals used in polymer synthesis

Directory of Open Access Journals (Sweden)

Alexander Fainleib

2013-01-01

Full Text Available In the current scenario, there is growing interest in the products of degradation of rubber (natural and synthetic for specific applications in different industry sectors, whose benefits in replacing conventionally used products are mainly related to sustainability. Since the degradation products of rubber can be used in different areas, several research groups may have the interest aroused by these products, but are not familiar with the aspects related to the chemical behavior of rubber. This review aims to bring together the key information in the published literature on the degradation of natural rubber, emphasizing metatheses reactions, oxidative damage and splitting of the double bond, in order to serve as a reference source for researchers from different fields interested in obtaining such kind of products. The structures and properties as well as additional chemical transformations resulting in oligomers of isoprene, functionalised oligomers and polymers based on both are also described.

Scintillating optical fibers for fine-grained hodoscopes

International Nuclear Information System (INIS)

Borenstein, S.R.; Strand, R.C.

1981-01-01

Fast detectors with fine spatial resolution will be needed to exploit high event rates at ISABELLE. Scintillating optical fibers for fine grained hodoscopes have been developed by the authors. A commercial manufacturer of optical fibers has drawn and clad PVT scintillator. Detection efficiencies greater than 99% have been achieved for a 1 mm fiber with a PMT over lengths up to 60 cm. Small diameter PMT's and avalanche photodiodes have been tested with the fibers. Further improvements are sought for the fiber and for the APD's sensitivity and coupling efficiency with the fiber

Fabrication of ultra-fine nanostructures using edge transfer printing.

Science.gov (United States)

Xue, Mianqi; Li, Fengwang; Cao, Tingbing

2012-03-21

The exploration of new methods and techniques for application in diverse fields, such as photonics, microfluidics, biotechnology and flexible electronics is of increasing scientific and technical interest for multiple uses over distance of 10-100 nm. This article discusses edge transfer printing--a series of unconventional methods derived from soft lithography for nanofabrication. It possesses the advantages of easy fabrication, low-cost and great serviceability. In this paper, we show how to produce exposed edges and use various materials for edge transfer printing, while nanoskiving, nanotransfer edge printing and tunable cracking for nanogaps are introduced. Besides this, different functional materials, such as metals, inorganic semiconductors and polymers, as well as localised heating and charge patterning, are described here as unconventional "inks" for printing. Edge transfer printing, which can effectively produce sub-100 nm scale ultra-fine structures, has broad applications, including metallic nanowires as nanoelectrodes, semiconductor nanowires for chemical sensors, heterostructures of organic semiconductors, plasmonic devices and so forth. This journal is © The Royal Society of Chemistry 2012

Annealing induced atomic rearrangements on (Ga,In) (N,As) probed by hard X-ray photoelectron spectroscopy and X-ray absorption fine structure.

Science.gov (United States)

Ishikawa, Fumitaro; Higashi, Kotaro; Fuyuno, Satoshi; Morifuji, Masato; Kondow, Masahiko; Trampert, Achim

2018-04-13

We study the effects of annealing on (Ga 0.64 ,In 0.36 ) (N 0.045 ,As 0.955 ) using hard X-ray photoelectron spectroscopy and X-ray absorption fine structure measurements. We observed surface oxidation and termination of the N-As bond defects caused by the annealing process. Specifically, we observed a characteristic chemical shift towards lower binding energies in the photoelectron spectra related to In. This phenomenon appears to be caused by the atomic arrangement, which produces increased In-N bond configurations within the matrix, as indicated by the X-ray absorption fine structure measurements. The reduction in the binding energies of group-III In, which occurs concomitantly with the atomic rearrangements of the matrix, causes the differences in the electronic properties of the system before and after annealing.

Helping Preschoolers Prepare for Writing: Developing Fine Motor Skills

Science.gov (United States)

Huffman, J. Michelle; Fortenberry, Callie

2011-01-01

Early childhood is the most intensive period for the development of physical skills. Writing progress depends largely on the development of fine motor skills involving small muscle movements of the hand. Young children need to participate in a variety of developmentally appropriate activities intentionally designed to promote fine motor control.…

Utilisation of Waste Marble Dust as Fine Aggregate in Concrete

Science.gov (United States)

Vigneshpandian, G. V.; Aparna Shruthi, E.; Venkatasubramanian, C.; Muthu, D.

2017-07-01

Concrete is the important construction material and it is used in the construction industry due to its high compressive strength and its durability. Now a day’s various studies have been conducted to make concrete with waste material with the intention of reducing cost and unavailability of conventional materials. This paper investigates the strength properties of concrete specimens cast using waste marble dust as replacement of fine aggregate. The marble pieces are finely crushed to powdered and the gradation is compared with conventional fine aggregate. Concrete specimen were cast using wmd in the laboratory with different proportion (25%, 50% and 100%) by weight of cement and from the studies it reveals that addition of waste marble dust as a replacement of fine aggregate marginally improves compressive, tensile and flexural strength in concrete.

Marine litter plastics and microplastics and their toxic chemicals components: the need for urgent preventive measures.

Science.gov (United States)

Gallo, Frederic; Fossi, Cristina; Weber, Roland; Santillo, David; Sousa, Joao; Ingram, Imogen; Nadal, Angel; Romano, Dolores

2018-01-01

Persistent plastics, with an estimated lifetime for degradation of hundreds of years in marine conditions, can break up into micro- and nanoplastics over shorter timescales, thus facilitating their uptake by marine biota throughout the food chain. These polymers may contain chemical additives and contaminants, including some known endocrine disruptors that may be harmful at extremely low concentrations for marine biota, thus posing potential risks to marine ecosystems, biodiversity and food availability. Although there is still need to carry out focused scientific research to fill the knowledge gaps about the impacts of plastic litter in the marine environment (Wagner et al. in Environ Sci Eur 26:9, 2014), the food chain and human health, existing scientific evidence and concerns are already sufficient to support actions by the scientific, industry, policy and civil society communities to curb the ongoing flow of plastics and the toxic chemicals they contain into the marine environment. Without immediate strong preventive measures, the environmental impacts and the economic costs are set only to become worse, even in the short term. Continued increases in plastic production and consumption, combined with wasteful uses, inefficient waste collection infrastructures and insufficient waste management facilities, especially in developing countries, mean that even achieving already established objectives for reductions in marine litter remains a huge challenge, and one unlikely to be met without a fundamental rethink of the ways in which we consume plastics. This document was prepared by a working group of Regional Centres of the Stockholm and Basel Conventions and related colleagues intended to be a background document for discussion in the 2017 Conference of the Parties (COP) of the Basel Convention on hazardous wastes and the Stockholm Convention on persistent organic pollutants (POPs). The COP finally approved that the issue of plastic waste could be dealt by its

Effect of bioremediation agents on oil biodegradation in medium-fine sand

International Nuclear Information System (INIS)

Croft, B.C.; Swannell, R.P.J.; Grant, A.L.; Lee, K.

1995-01-01

A spill of weathered Arabian light crude oil on an intertidal sand zone was simulated in the laboratory. Respirometry, chemical, and microbiological methods were employed to assess the effectiveness of two bioremediation agents: a slow-release inorganic (Max Bac) and an oleophilic organic fertilizer (Inipol EAP22). Inipol EAP22 stimulated additional CO 2 evolution, and significantly increased both the total chemoheterotrophic population and the number of hydrocarbon-degrading microorganisms. At the end of the experiment, the residual oil extracted from the Inipol-treated sand was significantly more biodegraded, based on the application of the conserved biomarkers (phytane and 17α, 21β hopane), than that removed from the other sand columns, albeit by a relatively small amount. The results suggested that Inipol EAP22 stimulated the chemoheterotrophic and hydrocarbon-degrading microbial population and, after a lag phase, encouraged oil biodegradation in fine sandy sediments subjected to a vertical tidal cycle

Reducing the fine-tuning of gauge-mediated SUSY breaking

Energy Technology Data Exchange (ETDEWEB)

Casas, J.A.; Moreno, Jesus M. [Universidad Autonoma de Madrid, Instituto de Fisica Teorica, IFT-UAM/CSIC, Madrid (Spain); Robles, Sandra [Universidad Autonoma de Madrid, Instituto de Fisica Teorica, IFT-UAM/CSIC, Madrid (Spain); Universidad Autonoma de Madrid, Departamento de Fisica Teorica, Madrid (Spain); Rolbiecki, Krzysztof [Universidad Autonoma de Madrid, Instituto de Fisica Teorica, IFT-UAM/CSIC, Madrid (Spain); University of Warsaw, Faculty of Physics, Warsaw (Poland)

2016-08-15

Despite their appealing features, models with gauge-mediated supersymmetry breaking (GMSB) typically present a high degree of fine-tuning, due to the initial absence of the top trilinear scalar couplings, A{sub t} = 0. In this paper, we carefully evaluate such a tuning, showing that is worse than per mil in the minimal model. Then, we examine some existing proposals to generate A{sub t} ≠ 0 term in this context. We find that, although the stops can be made lighter, usually the tuning does not improve (it may be even worse), with some exceptions, which involve the generation of A{sub t} at one loop or tree level. We examine both possibilities and propose a conceptually simplified version of the latter; which is arguably the optimum GMSB setup (with minimal matter content), concerning the fine-tuning issue. The resulting fine-tuning is better than one per mil, still severe but similar to other minimal supersymmetric standard model constructions. We also explore the so-called ''little A{sub t}{sup 2}/m{sup 2} problem'', i.e. the fact that a large A{sub t}-term is normally accompanied by a similar or larger sfermion mass, which typically implies an increase in the fine-tuning. Finally, we find the version of GMSB for which this ratio is optimized, which, nevertheless, does not minimize the fine-tuning. (orig.)

GD-OES and XPS coupling: A new way for the chemical profiling of photovoltaic absorbers

Energy Technology Data Exchange (ETDEWEB)

Mercier, Dimitri, E-mail: dimitri.mercier@uvsq.fr [Institut Lavoisier de Versailles, 45 av. des Etats-Unis, 78035 Versailles Cedex (France); Bouttemy, Muriel; Vigneron, Jackie [Institut Lavoisier de Versailles, 45 av. des Etats-Unis, 78035 Versailles Cedex (France); Chapon, Patrick [HORIBA Jobin Yvon SAS, F-91165 Longjumeau (France); Etcheberry, Arnaud [Institut Lavoisier de Versailles, 45 av. des Etats-Unis, 78035 Versailles Cedex (France)

2015-08-30

Highlights: • The coupling between GD-OES and XPS analysis is a promising way for fine characterization of thin layers. • Crater surface modifications obtained after GD-OES sputtering depend to the plasma gas. • Inversion of the gas flow improves the surface of the crater. • The modified layer is totally eliminated a few seconds after restarting GD-OES sputtering. - Abstract: In this paper, we examine the complementarity of Glow Discharge Optical Emission Spectroscopy (GD-OES) and X Ray Photoelectron Spectroscopy (XPS) for the realization of fine chemical depth profiling of photovoltaic absorbers using Cu(In,Ga)Se{sub 2} (CIGS) materials. The possibility to use sequentially these two techniques is discussed in this paper. We have evaluated the chemical modifications of the crater after GD-OES analyses which depend on the manner of finishing the plasma etching sequence; and we propose different ways to limit or eliminate this effect. For the moment, an intermediate step (wet chemical etching or weak sputtering) is required to obtain a CIGS phase in the crater. Finally, we have demonstrated the possibility to restart the GD-OES analyses of the materials after XPS quantification or GD-OES breaking without modifying the profile shape.

ELNES study of chemical solution deposited SrO(SrTiO3)n Ruddlesden-Popper films: Experiment and simulation

International Nuclear Information System (INIS)

Riedl, T.; Gemming, T.; Weissbach, T.; Seifert, G.; Gutmann, E.; Zschornak, M.; Meyer, D.C.; Gemming, S.

2009-01-01

This article analyzes electron energy-loss near-edge fine structures of the SrO(SrTiO 3 ) n=1 Ruddlesden-Popper system and of the parent compounds SrTiO 3 and SrO by comparison with first principles calculations. For that, the fine structures of chemical solution deposited Ruddlesden-Popper films have been experimentally recorded by means of transmission electron microscopy. Moreover, density of states computations using an all-electron density-functional code have been performed. It is shown that the appearance and shape of the experimental O-K and Ti-L 2,3 fine structure features result from the crystallography-dependent electronic structure of the investigated oxides, which display technologically interesting dielectric as well as lattice-structural properties.

Performance of concrete with partial replacement of fine aggregates ...

African Journals Online (AJOL)

The study investigated the level of replacement of fine aggregate with waste glass that will result in optimal compressive strength. A total of 36 cubes were cast. 6 cubes without waste glass (control) and 30 cubes containing waste glass as partial replacement for fine aggregates at 15%, 25%, 35%, 45%, and 50%.

Fine Arts Standards of Learning for Virginia Public Schools

Science.gov (United States)

Virginia Department of Education, 2006

2006-01-01

The Fine Arts Standards of Learning in this publication represent a major development in public education in Virginia, emphasizing the importance of instruction in the fine arts (dance arts, music, theatre arts, and visual arts) as an important part of Virginia's efforts to provide challenging educational programs in the public schools. Knowledge…

Identification and chemical characterization of industrial particulate matter sources in southwest Spain.

Science.gov (United States)

Alastuey, Andrés; Querol, Xavier; Plana, Feliciano; Viana, Mar; Ruiz, Carmen R; Sánchez de la Campa, Ana; de la Rosa, Jesús; Mantilla, Enrique; García dos Santos, Saul

2006-07-01

A detailed physical and chemical characterization of coarse particulate matter (PM10) and fine particulate matter (PM2.5) in the city of Huelva (in Southwestern Spain) was carried out during 2001 and 2002. To identify the major emission sources with a significant influence on PM10 and PM2.5, a methodology was developed based on the combination of: (1) real-time measurements of levels of PM10, PM2.5, and very fine particulate matter (PM1); (2) chemical characterization and source apportionment analysis of PM10 and PM2.5; and (3) intensive measurements in field campaigns to characterize the emission plumes of several point sources. Annual means of 37, 19, and 16 microg/m3 were obtained for the study period for PM10, PM2.5, and PM1, respectively. High PM episodes, characterized by a very fine grain size distribution, are frequently detected in Huelva mainly in the winter as the result of the impact of the industrial emission plumes on the city. Chemical analysis showed that PM at Huelva is characterized by high PO4(3-) and As levels, as expected from the industrial activities. Source apportionment analyses identified a crustal source (36% of PM10 and 31% of PM2.5); a traffic-related source (33% of PM10 and 29% of PM2.5), and a marine aerosol contribution (only in PM10, 4%). In addition, two industrial emission sources were identified in PM10 and PM2.5: (1) a petrochemical source, 13% in PM10 and 8% in PM2.5; and (2) a mixed metallurgical-phosphate source, which accounts for 11-12% of PM10 and PM2.5. In PM2.5 a secondary source has been also identified, which contributed to 17% of the mass. A complete characterization of industrial emission plumes during their impact on the ground allowed for the identification of tracer species for specific point sources, such as petrochemical, metallurgic, and fertilizer and phosphate production industries.

Technical fine-tuning problem in renormalized perturbation theory

International Nuclear Information System (INIS)

Foda, O.E.

1983-01-01

The technical - as opposed to physical - fine tuning problem, i.e. the stability of tree-level gauge hierarchies at higher orders in renormalized perturbation theory, in a number of different models is studied. These include softly-broken supersymmetric models, and non-supersymmetric ones with a hierarchy of spontaneously-broken gauge symmetries. The models are renormalized using the BPHZ prescription, with momentum subtractions. Explicit calculations indicate that the tree-level hierarchy is not upset by the radiative corrections, and consequently no further fine-tuning is required to maintain it. Furthermore, this result is shown to run counter to that obtained via Dimensional Renormalization, (the only scheme used in previous literature on the subject). The discrepancy originates in the inherent local ambiguity in the finite parts of subtracted Feynman integrals. Within fully-renormalized perturbation theory the answer to the technical fine-tuning question (in the sense of whether the radiative corrections will ''readily'' respect the tree level gauge hierarchy or not) is contingent on the renormalization scheme used to define the model at the quantum level, rather than on the model itself. In other words, the need for fine-tuning, when it arises, is an artifact of the application of a certain class of renormalization schemes

Technical fine-tuning problem in renormalized perturbation theory

Energy Technology Data Exchange (ETDEWEB)

Foda, O.E.

1983-01-01

The technical - as opposed to physical - fine tuning problem, i.e. the stability of tree-level gauge hierarchies at higher orders in renormalized perturbation theory, in a number of different models is studied. These include softly-broken supersymmetric models, and non-supersymmetric ones with a hierarchy of spontaneously-broken gauge symmetries. The models are renormalized using the BPHZ prescription, with momentum subtractions. Explicit calculations indicate that the tree-level hierarchy is not upset by the radiative corrections, and consequently no further fine-tuning is required to maintain it. Furthermore, this result is shown to run counter to that obtained via Dimensional Renormalization, (the only scheme used in previous literature on the subject). The discrepancy originates in the inherent local ambiguity in the finite parts of subtracted Feynman integrals. Within fully-renormalized perturbation theory the answer to the technical fine-tuning question (in the sense of whether the radiative corrections will ''readily'' respect the tree level gauge hierarchy or not) is contingent on the renormalization scheme used to define the model at the quantum level, rather than on the model itself. In other words, the need for fine-tuning, when it arises, is an artifact of the application of a certain class of renormalization schemes.

Phenotypic plasticity of fine root growth increases plant productivity in pine seedlings

Directory of Open Access Journals (Sweden)

Grissom James E

2004-09-01

Full Text Available Abstract Background The plastic response of fine roots to a changing environment is suggested to affect the growth and form of a plant. Here we show that the plasticity of fine root growth may increase plant productivity based on an experiment using young seedlings (14-week old of loblolly pine. We use two contrasting pine ecotypes, "mesic" and "xeric", to investigate the adaptive significance of such a plastic response. Results The partitioning of biomass to fine roots is observed to reduce with increased nutrient availability. For the "mesic" ecotype, increased stem biomass as a consequence of more nutrients may be primarily due to reduced fine-root biomass partitioning. For the "xeric" ecotype, the favorable influence of the plasticity of fine root growth on stem growth results from increased allocation of biomass to foliage and decreased allocation to fine roots. An evolutionary genetic analysis indicates that the plasticity of fine root growth is inducible, whereas the plasticity of foliage is constitutive. Conclusions Results promise to enhance a fundamental understanding of evolutionary changes of tree architecture under domestication and to design sound silvicultural and breeding measures for improving plant productivity.

Use of Unprocessed Coal Bottom Ash as Partial Fine Aggregate ...

African Journals Online (AJOL)

2012r

transportation applications such as structural fill, road base material, and as snow ... normal fine particles resulting in weak porous paste, modulus of elasticity is ..... with the porous structure and high absorptivity of fine particles of bottom ash.

Picobubble enhanced fine coal flotation

Energy Technology Data Exchange (ETDEWEB)

Tao, Y.J.; Liu, J.T.; Yu, S.; Tao, D. [University of Kentucky, Lexington, KY (United States). Dept. of Mining Engineering

2006-07-01

Froth flotation is widely used in the coal industry to clean -28 mesh fine coal. A successful recovery of particles by flotation depends on efficient particle-bubble collision and attachment with minimal subsequent particle detachment from bubble. Flotation is effective in a narrow size range beyond which the flotation efficiency drops drastically. It is now known that the low flotation recovery of particles in the finest size fractions is mainly due to a low probability of bubble-particle collision while the main reason for poor coarse particle flotation recovery is the high probability of detachment. A fundamental analysis has shown that use of picobubbles can significantly improve the flotation recovery of particles in a wide range of size by increasing the probability of collision and attachment and reducing the probability of detachment. A specially designed column with a picobubble generator has been developed for enhanced recovery of fine coal particles. Picobubbles were produced based on the hydrodynamic cavitation principle. They are characterized by a size distribution that is mostly below 1 {mu}m and adhere preferentially to the hydrophobic surfaces. The presence of picobubbles increases the probability of collision and attachment and decreases the probability of detachment, thus enhancing flotation recovery. Experimental results with the Coalberg seam coal in West Virginia, U.S.A. have shown that the use of picobubbles in a 2 in. column flotation increased fine coal recovery by 10-30%, depending on the feed rate, collector dosage, and other flotation conditions. Picobubbles also acted as a secondary collector and reduced the collector dosage by one third to one half.

FY 2000 study report on the study on technological development of the chemical processes of the next generation; 2000 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The technological development of the innovative chemical reaction processes is studied, in order to accomplish further energy saving, and reduction of resource consumption and environmental loads. Described herein are the FY 2000 study results. The program for systematization of the next-generation chemical processes systematically pigeonholes the undergoing projects and subjects to be studied, based on the principles of simplification, and sets the study fields of organic bulk chemicals, organic fine chemicals, highpolymer materials and inorganic materials. The program for investigation on next-generation chemical processes reviews creation and technological use of tailor-made biocatalysts, polymer materials which utilize wood resources, tailor-made reaction process engineering for handling fine particles in high-temperature reaction fields, production and processing of materials for high-performance polymer batteries, and extreme energy saving process for polyolefins, and proposes the revisions. The newly proposed study themes include novel C1 catalytic processes toward minimal wastes, and high utilization of biotechnology for novel processes to create materials. (NEDO)

Impact of Poultry Litter Cake, Cleanout, and Bedding following Chemical Amendments on Soil C and N Mineralization

Directory of Open Access Journals (Sweden)

Dexter B. Watts

2012-01-01

Full Text Available Poultry litter is a great alternative N source for crop production. However, recent poultry litter management changes, and increased chemical amendment use may impact its N availability. Thus, research was initiated to evaluate the effect that broiler cake and total cleanout litter amended with chemical additives have on C and N mineralization. A 35-day incubation study was carried out on a Hartsells fine sandy loam (fine-loamy, siliceous, subactive, thermic Typic Hapludults soil common to the USA Appalachian Plateau region. Three poultry litter components (broiler cake, total cleanout, and bedding material from a broiler house were evaluated and compared to a soil control. Chemical amendments lime (CaCO3, gypsum (CaSO4, aluminum sulfate (AlSO4, and ferrous sulfate (FeSO4 were added to the poultry litter components to determine their impact on C and N mineralization. Litter component additions increased soil C mineralization in the order of broiler cake > total cleanout > bedding > soil control. Although a greater concentration of organic C was observed in the bedding, broiler cake mineralized the most C, which can be attributed to differences in the C : N ratio between treatments. Chemical amendment in addition to the manured soil also impacted C mineralization, with AlSO4 generally decreasing mineralization. Nitrogen mineralization was also significantly affected by poultry litter component applications. Broiler cake addition increased N availability followed by total cleanout compared to soil control, while the bedding resulted in net N immobilization. Chemical amendments impacted N mineralization primarily in the broiler cake amended soil where all chemical amendments decreased mineralization compared to the no chemical amendment treatment. This short-term study (35-day incubation indicates that N availability to crops may be different depending on the poultry litter component used for fertilization and chemical amendment use which could

Application of synthetic biology for production of chemicals in yeast Saccharomyces cerevisiae

DEFF Research Database (Denmark)

Borodina, Irina; Li, Mingji

2015-01-01

Synthetic biology and metabolic engineering enable generation of novel cell factories that efficiently convert renewable feedstocks into biofuels, bulk, and fine chemicals, thus creating the basis for biosustainable economy independent on fossil resources. While over a hundred proof...... biology has the potential to bring down this cost by improving our ability to predictably engineer biological systems. This review highlights synthetic biology applications for design, assembly, and optimization of non-native biochemical pathways in baker's yeast Saccharomyces cerevisiae. We describe......-of-concept chemicals have been made in yeast, only a very small fraction of those has reached commercial-scale production so far. The limiting factor is the high research cost associated with the development of a robust cell factory that can produce the desired chemical at high titer, rate, and yield. Synthetic...

effect of fines content on the engineering properties of reconstituted

African Journals Online (AJOL)

2012-11-03

Nov 3, 2012 ... Reconstitution of the natural soil (0% fines content) yielded soil samples having fines content between ... action to different stabilizing agents are better under- .... tion cracking, whereas clay soils with too low plastic limit (PL) ...

Geotechnical field investigation of the rapid densification phenomenon in oil sands mature fine tailings

Energy Technology Data Exchange (ETDEWEB)

Guo, C.; Chalaturnyk, R.J.; Scott, J.D.; Cyre, G. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering; MacKinnon, M. [Syncrude Canada Ltd., Edmonton, AB (Canada). Edmonton Research Centre

2002-07-01

The Mildred Lake Settling Basin (MLSB) is an oil sand tailings pond with a water area of about 11 square km and a maximum depth of mature fine tailings (MFT) of about 50 m, rendering it Syncrude's largest disposal site for tailings. Syncrude began storing the MFT in 1978 but in recent years there has been a sharp increase in the consolidation of the fine tailings, creating pumping challenges in the transfer of tailings from the MLSB for the creation of composite tailings. This paper presents preliminary results of field and laboratory study which have been launched to better manage the rapid densification of fine tailings. The study involves sampling, field vane tests, cone penetration tests, steel plate penetration tests and earth pressure measurements. Methane producing microorganisms have become very active in the part of the pond that is experiencing rapid densification. The objective of the study was to determine the inventory and distribution of high strength MFT in current storage ponds and to assess whether geotechnical properties are enough to support direct loading with solids such as sand, clay or coke. The cause of the phenomena was also examined along with ways to possibly enhance MFT development through microbial, physical or chemical treatments. Results show that the accumulation of methane gas may have reached a critical state in some parts of the pond. The densification phenomenon at the southern pond is more significant compared to the northern pond. Earth pressure measurements indicate that the earth pressure cell has good sensitivity and that the coefficient of earth pressure at rest is approximately one. Good agreement was reached between different testing methods used to determine geotechnical properties of MFT. 5 refs., 4 tabs., 14 figs.

The Effects of Different Fine Recycled Concrete Aggregates on the Properties of Mortar

Science.gov (United States)

Fan, Cheng-Chih; Huang, Ran; Hwang, Howard; Chao, Sao-Jeng

2015-01-01

The practical use of recycled concrete aggregate produced by crushing concrete waste reduces the consumption of natural aggregate and the amount of concrete waste that ends up in landfills. This study investigated two methods used in the production of fine recycled concrete aggregate: (1) a method that produces fine as well as coarse aggregate, and (2) a method that produces only fine aggregate. Mortar specimens were tested using a variety of mix proportions to determine how the characteristics of fine recycled concrete aggregate affect the physical and mechanical properties of the resulting mortars. Our results demonstrate the superiority of mortar produced using aggregate produced using the second of the two methods. Nonetheless, far more energy is required to render concrete into fine aggregate than is required to produce coarse as well as fine aggregate simultaneously. Thus, the performance benefits of using only fine recycled concrete aggregate must be balanced against the increased impact on the environment.

Light stops and fine-tuning in MSSM

Energy Technology Data Exchange (ETDEWEB)

Cici, Ali; Kirca, Zerrin; Uen, Cem Salih [Uludag Univ., Department of Physics, Bursa (Turkey)

2018-01-15

We discuss the fine-tuning issue within the MSSM framework. Following the idea that the fine-tuning can measure effects of some missing mechanism, we impose non-universal gaugino masses at the GUT scale, and explore the low scale implications. We realize that the fine-tuning parametrized with Δ{sub EW} can be as low as zero. We consider the stop mass with a special importance and focus on the mass scales as m{sub t} ≤ 700 GeV, which are excluded by the current experiments when the stop decays into a neutralino along with a top quark or a chargino along with a bottom quark. We find that the stop mass can be as low as about 250 GeV with Δ{sub EW} ∝ 50. We find that the solutions in this region can be excluded only up to 60% when stop decays into a neutralino-top quark, and 50% when it decays into a chargino-b quark. Setting 65% CL to be potential exclusion and 95% to be pure exclusion limit such solutions will be tested in near future experiments, which are conducted with higher luminosity. In addition to stop, the region with low fine-tuning and light stops predicts masses for the other supersymmetric particles such as m{sub b} >or similar 700 GeV, m{sub τ} >or similar 1 TeV, m{sub χ{sub 1}{sup {sub ±}}} >or similar 120 GeV. The details for the mass scales and decay rates are also provided by tables of benchmark points. (orig.)

Light stops and fine-tuning in MSSM

Science.gov (United States)

Çiçi, Ali; Kırca, Zerrin; Ün, Cem Salih

2018-01-01

We discuss the fine-tuning issue within the MSSM framework. Following the idea that the fine-tuning can measure effects of some missing mechanism, we impose non-universal gaugino masses at the GUT scale, and explore the low scale implications. We realize that the fine-tuning parametrized with Δ _{EW} can be as low as zero. We consider the stop mass with a special importance and focus on the mass scales as m_{\\tilde{t}} ≤ 700 GeV, which are excluded by the current experiments when the stop decays into a neutralino along with a top quark or a chargino along with a bottom quark. We find that the stop mass can be as low as about 250 GeV with Δ _{EW} ˜ 50. We find that the solutions in this region can be exluded only up to 60% when stop decays into a neutralino-top quark, and 50% when it decays into a chargino-b quark. Setting 65% CL to be potential exclusion and 95% to be pure exclusion limit such solutions will be tested in near future experiments, which are conducted with higher luminosity. In addition to stop, the region with low fine-tuning and light stops predicts masses for the other supersymmetric particles such as m_{\\tilde{b}} ≳ 700 GeV, m_{\\tilde{τ }} ≳ 1 TeV, m_{\\tilde{χ }1^{± }} ≳ 120 GeV. The details for the mass scales and decay rates are also provided by tables of benchmark points.

On the Accelerated Settling of Fine Particles in a Bidisperse Slurry

Directory of Open Access Journals (Sweden)

Leonid L. Minkov

2015-01-01

Full Text Available An estimation of increasing the volume average sedimentation velocity of fine particles in bidisperse suspension due to their capturing in the circulation zone formed in the laminar flow of incompressible viscous fluid around the spherical coarse particle is proposed. The estimation is important for an explanation of the nonmonotonic shape of the separation curve observed for hydrocyclones. The volume average sedimentation velocity is evaluated on the basis of a cellular model. The characteristic dimensions of the circulation zone are obtained on the basis of a numerical solution of Navier-Stokes equations. Furthermore, these calculations are used for modelling the fast sedimentation of fine particles during their cosedimentation in bidisperse suspension. It was found that the acceleration of sedimentation of fine particles is determined by the concentration of coarse particles in bidisperse suspension, and the sedimentation velocity of fine fraction is proportional to the square of the coarse and fine particle diameter ratio. The limitations of the proposed model are ascertained.

Development of Chemically Defined Media to Express Trp-Analog-Labeled Proteins in a Lactococcus lactis Trp Auxotroph.

Science.gov (United States)

Shao, Jinfeng; Marcondes, Marcelo F M; Oliveira, Vitor; Broos, Jaap

2016-01-01

Chemically defined media for growth of Lactococcus lactis strains contain about 50 components, making them laborious and expensive growth media. However, they are crucial for metabolism studies as well as for expression of heterologous proteins labeled with unnatural amino acids. In particular, the L. lactis Trp auxotroph PA1002, overexpressing the tryptophanyl tRNA synthetase enzyme of L. lactis, is very suitable for the biosynthetic incorporation of Trp analogs in proteins because of its most relaxed substrate specificity reported towards Trp analogs. Here we present two much simpler defined media for L. lactis, which consist of only 24 or 31 components, respectively, and with which the L. lactis Trp auxotroph shows similar growth characteristics as with a 50-component chemically defined medium. Importantly, the expression levels of two recombinant proteins used for evaluation were up to 2-3 times higher in these new media than in the 50-component medium, without affecting the Trp analog incorporation efficiency. Taken together, the simplest chemically defined media reported so far for L. lactis are presented. Since L. lactis also shows auxotrophy for Arg, His, Ile, Leu Val, and Met, our simplified media may also be useful for the biosynthetic incorporation of analogs of these five amino acids. © 2016 The Author(s) Published by S. Karger AG, Basel.

Sintering of Fine Particles in Suspension Plasma Sprayed Coatings

Directory of Open Access Journals (Sweden)

Leszek Latka

2010-07-01

Full Text Available Suspension plasma spraying is a process that enables the production of finely grained nanometric or submicrometric coatings. The suspensions are formulated with the use of fine powder particles in water or alcohol with some additives. Subsequently, the suspension is injected into plasma jet and the liquid additives evaporate. The remaining fine solids are molten and subsequently agglomerate or remain solid, depending on their trajectory in the plasma jet. The coating’s microstructure results from these two groups of particles arriving on a substrate or previously deposited coating. Previous experimental studies carried out for plasma sprayed titanium oxide and hydroxyapatite coatings enabled us to observe either a finely grained microstructure or, when a different suspension injection mode was used, to distinguish two zones in the microstructure. These two zones correspond to the dense zone formed from well molten particles, and the agglomerated zone formed from fine solid particles that arrive on the substrate in a solid state. The present paper focuses on the experimental and theoretical analysis of the formation process of the agglomerated zone. The experimental section establishes the heat flux supplied to the coating during deposition. In order to achieve this, calorimetric measurements were made by applying experimental conditions simulating the real coatings’ growth. The heat flux was measured to be in the range from 0.08 to 0.5 MW/m2,depending on the experimental conditions. The theoretical section analyzes the sintering during the coating’s growth, which concerns the fine particles arriving on the substrate in the solid state. The models of volume, grain boundary and surface diffusion were analyzed and adapted to the size and chemistry of the grains, temperature and time scales corresponding to the suspension plasma spraying conditions. The model of surface diffusion was found to best describe the sintering during suspension

Chemically bonded ceramic matrix composites: Densification and conversion to diffusion bonding

International Nuclear Information System (INIS)

Johnson, B.R.; Guelguen, M.A.; Kriven, W.M.

1995-01-01

Chemically bonded ceramics appear to be a promising alternative route for near-net shape fabrication of multi-phase ceramic matrix composites (CMC's). The hydraulic (and refractory) properties of fine mono-calcium aluminate (CaAl 2 O 4 ) powders were used as the chemically bonding matrix phase, while calcia stabilized zirconia powders were the second phase material. Samples containing up to 70 wt% (55 vol%) zirconia have been successfully compacted and sintered. Various processing techniques were evaluated. Processing was optimized based on material properties, dilatometry and simultaneous thermal analysis (DTA/TGA). The physical characteristics of this novel CMC were characterized by hardness, density, and fracture toughness testing. Microstructures were evaluated by SEM and phase identification was verified using XRD

Picobubble enhanced column flotation of fine coal

Energy Technology Data Exchange (ETDEWEB)

Tao, D.; Yu, S.; Parekh, B.K. [University of Kentucky, Lexington, KY (United States). Mining Engineering

2006-07-01

The purpose is to study the effectiveness of picobubbles in the column flotation of -28 mesh fine coal particles. A flotation column with a picobubble generator was developed and tested for enhancing the recovery of ultrafine coal particles. The picobubble generator was designed using the hydrodynamic cavitation principle. A metallurgical and a steam coal were tested in the apparatus. The results show that the use of picobubbles in a 2in. flotation column increased the recovery of fine coal by 10 to 30%. The recovery rate varied with feed rate, collector dosage, and other column conditions. 40 refs., 8 figs., 2 tabs.

Method and equipment to determine fine dust concentrations

International Nuclear Information System (INIS)

Breuer, H.; Gebhardt, J.; Robock, K.

1979-01-01

The measured values for the fine dust concentration are obtained by optical means which where possible agree with the probable deposited quantity of fine dust in the pulmonary alveoli. This is done by receiving the strong radiation produced in dependence of the particle size at an angle of 70 0 to the angle of incidence of the primary beam. The wavelength of the primary radiation is in the region of 1000 to 2000 nm. (RW) [de

Assessment of Pb-slag, MSWI bottom ash and boiler and fly ash for using as a fine aggregate in cement mortar.

Science.gov (United States)

Saikia, Nabajyoti; Cornelis, Geert; Mertens, Gilles; Elsen, Jan; Van Balen, Koenraad; Van Gerven, Tom; Vandecasteele, Carlo

2008-06-15

Three types of wastes, metallurgical slag from Pb production (SLG), the sand-sized (0.1-2 mm) fraction of MSWI bottom ash from a grate furnace (SF), and boiler and fly ash from a fluidised bed incinerator (BFA), were characterized and used to replace the fine aggregate during preparation of cement mortar. The chemical and mineralogical behaviour of these wastes along with the reactivities of the wastes with lime and the hydration behaviour of ordinary Portland cement paste with and without these wastes added were evaluated by various chemical and instrumental techniques. The compressive strengths of the cement mortars containing waste as a partial substitution of fine aggregates were also assessed. Finally, leaching studies of the wastes and waste containing cement mortars were conducted. SLG addition does not show any adverse affect during the hydration of cement, or on the compressive strengths behaviours of mortars. Formation of expansive products like ettringite, aluminium hydroxide and H2 gas due to the reaction of some constituents of BFA and SF with alkali creates some cracks in the paste as well as in the cement mortars, which lower the compressive strength of the cement mortars. However, utilization of all materials in cement-based application significantly improves the leaching behaviour of the majority of the toxic elements compared to the waste as such.

Function spaces with uniform, fine and graph topologies

CERN Document Server

McCoy, Robert A; Jindal, Varun

2018-01-01

This book presents a comprehensive account of the theory of spaces of continuous functions under uniform, fine and graph topologies. Besides giving full details of known results, an attempt is made to give generalizations wherever possible, enriching the existing literature. The goal of this monograph is to provide an extensive study of the uniform, fine and graph topologies on the space C(X,Y) of all continuous functions from a Tychonoff space X to a metric space (Y,d); and the uniform and fine topologies on the space H(X) of all self-homeomorphisms on a metric space (X,d). The subject matter of this monograph is significant from the theoretical viewpoint, but also has applications in areas such as analysis, approximation theory and differential topology. Written in an accessible style, this book will be of interest to researchers as well as graduate students in this vibrant research area.

The interaction of fine particles with stranded oil

International Nuclear Information System (INIS)

Owens, E.H.

1999-01-01

The interaction of micron-sized mineral particles with stranded oil reduces its adhesion to solid surfaces, such as sediments or bedrock. The net result is the formation of stable, micron-sized, oil droplets that disperse into the water column. In turn, the increase in surface area makes the oil more available for biodegradation. Oil and Fine-particle Interaction ('OFI') can explain how oiled shorelines are cleaned naturally in the absence of wave action in very sheltered coastal environments. Fine-particle interaction can be accelerated during a spill response by relocating the oiled sediments into the surf zone. This has been achieved successfully on two occasions to date: the Tampa Bay response in Florida, and the Sea Empress operation in Wales. Sediment relocation also causes physical abrasion by the hydraulic action of waves so that the processes of fine-particle interaction and surf washing usually occur in combination on open coasts. (author)

The contribution of fine roots to peatland stability under changing environmental conditions

Science.gov (United States)

Malhotra, A.; Brice, D. J.; Childs, J.; Phillips, J.; Hanson, P. J.; Iversen, C. M.

2017-12-01

Fine-root production and traits are closely linked with ecosystem nutrient and water fluxes, and may regulate these fluxes in response to environmental change. Plant strategies can shift to favoring below- over aboveground biomass allocation when nutrients or moisture are limited. Fine-roots traits such as root tissue density (RTD) or specific root length (SRL) can also adapt to the environment, for example, by maximizing the area of soil exploited by decreasing RTD and increasing SRL during dry conditions. Fine-root trait plasticity could contribute to the stability of peatland carbon function in response to environmental change. However, the extent and mechanisms of peatland fine-root plasticity are unknown. We investigated fine-root growth and traits and their link to environmental factors and aboveground dynamics at SPRUCE (Spruce and Peatland Responses Under Changing Environments), a warming and elevated CO2 (eCO2) experiment in an ombrotrophic peatland. In the first growing season of whole ecosystem warming, fine-root production increased with warming and drying. Above- versus belowground allocation strategies varied by plant functional type (PFT). In shrubs, contrary to our expectation, aboveground- to fine-root production allocation ratio increased with dryer conditions, perhaps as a response to a concurrent increase in nutrients. Trait response hypotheses were largely supported, with RTD decreasing and SRL increasing with warming; however, response varied among PFTs. Once eCO2 was turned on in the second growing season, preliminary results suggest interactive effects of warming and eCO2 on total fine-root production: production decreased or increased with warming in ambient or elevated CO2 plots, respectively. Both trait and production responses to warming and eCO2 varied by microtopography and depth. Our results highlight plasticity of fine-root traits and biomass allocation strategies; the extent and mechanism of which varies by PFT. We will summarize

Uranium resources in fine-grained carbonaceous rocks of the Great Divide Basin, south-central Wyoming. National Uranium Resource Evaluation

International Nuclear Information System (INIS)

Burger, J.A.; Roe, L.M. II; Hacke, C.M.; Mosher, M.M.

1982-11-01

The uranium resources of the fine-grained carbonaceous rocks of the Great Divide Basin in southern Wyoming were assessed. The assessment was based primarily on data from some 600 boreholes. The data included information from geophysical logs, lithologic logs and cores, and drill cuttings. The cores and cuttings were analyzed for chemical U 3 O 8 , radiometric U, Th and trace elements. Selected samples were examined by thin section, sieve analysis, x-ray, SEM, ion probe, and alpha track methods. The uranium is associated with fine-grained carbonaceous shales, siltstones, mudstones, and coals in radioactive zones 5 to 50 ft thick that are continuous over broad areas. These rocks have a limited stratigraphic range between the Red Desert tongue of the Wasatch Formation and the lower part of the Tipton tongue of the Green River Formation. Most of this uranium is syngenetic in origin, in part from the chelation of the uranium by organic material in lake-side swamps and in part as uranium in very fine detrital heavy minerals. The uraniferous fine-grained carbonaceous rocks that exceed a cutoff grade of 100 ppM eU 3 O 8 extend over an area of 542 mi 2 and locally to a depth of approximately 2000 ft. The uraniferous area is roughly ellipical and embraces the zone of change between the piedmont and alluvial-fan facies and the lacustrine facies of the intertonguing Battle Spring, Wasatch, and Green River Formations. About 1.05 x 10 6 tons U 3 O 8 , based on gross-gamma logs not corrected for thorium, are assigned to the area in the first 500 ft; an estimated 3.49 x 10 6 tons are assigned to a depth of 1000 ft. These units also contain a substantial thorium resource that is also associated with fine-grained rocks. The thorium-to-uranium ratio generally ranges between 1 and 4. A thorium resource of 3.43 x 10 6 tons to a depth of 500 ft is estimated for the assessment area. 5 figures, 3 tables

Fine-Scale Spatial Heterogeneity in the Distribution of Waterborne Protozoa in a Drinking Water Reservoir.

Science.gov (United States)

Burnet, Jean-Baptiste; Ogorzaly, Leslie; Penny, Christian; Cauchie, Henry-Michel

2015-09-23

The occurrence of faecal pathogens in drinking water resources constitutes a threat to the supply of safe drinking water, even in industrialized nations. To efficiently assess and monitor the risk posed by these pathogens, sampling deserves careful design, based on preliminary knowledge on their distribution dynamics in water. For the protozoan pathogens Cryptosporidium and Giardia, only little is known about their spatial distribution within drinking water supplies, especially at fine scale. Two-dimensional distribution maps were generated by sampling cross-sections at meter resolution in two different zones of a drinking water reservoir. Samples were analysed for protozoan pathogens as well as for E. coli, turbidity and physico-chemical parameters. Parasites displayed heterogeneous distribution patterns, as reflected by significant (oo)cyst density gradients along reservoir depth. Spatial correlations between parasites and E. coli were observed near the reservoir inlet but were absent in the downstream lacustrine zone. Measurements of surface and subsurface flow velocities suggest a role of local hydrodynamics on these spatial patterns. This fine-scale spatial study emphasizes the importance of sampling design (site, depth and position on the reservoir) for the acquisition of representative parasite data and for optimization of microbial risk assessment and monitoring. Such spatial information should prove useful to the modelling of pathogen transport dynamics in drinking water supplies.