WorldWideScience

Sample records for final separating media

  1. Evaluation, engineering and development of advanced cyclone processes. Final separating media evaluation and test report (FSMER)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-19

    {open_quotes}Evaluation Engineering and Development of Advanced Cyclone Processes{close_quotes} is one of the DOE-PETC sponsored advanced coal cleaning projects, which share a number of specific goals. These goals are to produce a 6% ash product, reject 85% of the parent coal`s pyritic sulfur, recover 85% of the parent coal`s Btu value, and provide products that are less than 30% moisture. The process in this project, as the name implies, relies on a cyclone or cyclonic separator to achieve physical beneficiation based on the gravimetric differences between clean coal and its impurities. Just as important as the cyclonic separator, if not more so, is the selection of a parting liquid or medium for use in the separator. Selection of a separating medium is regarded as a significant portion of the project because it has a profound impact on the required unit operations, the performance of the separator, and economics of the process. The choice of medium especially influences selection of media recovery system(s), and the characteristics of clean coal and refuse products. Since medium selection is such an important aspect of the project, portions of the project are dedicated to the study, evaluation, and selection of the most desirable medium. Though separators are an important component, this project initially focused on media study, rather than the separators themselves. In coal processing, discussion of media requires description of the handling and recovery system(s), separation performance, interaction with coal, cost, and health, environmental and safety issues. In order to be effective, a candidate must perform well in all of these categories.

  2. Evaluation, engineering and development of advanced cyclone processes. Final separating media evaluation and test report (FSMER). Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This report consists of appendices pertaining to the separating media evaluation (calcium nitrate solution) and testing for an advanced cyclone process. Appendices include: materials safety data, aqueous medium regeneration, pH control strategy, and other notes and data.

  3. Acoustic Separation Technology; FINAL

    International Nuclear Information System (INIS)

    Fred Ahrens; Tim Patterson

    2002-01-01

    Today's restrictive environmental regulations encourage paper mills to close their water systems. Closed water systems increase the level of contaminants significantly. Accumulations of solid suspensions are detrimental to both the papermaking process and the final products. To remove these solids, technologies such as flotation using dissolved air (DAF), centrifuging, and screening have been developed. Dissolved Air Flotation systems are commonly used to clarify whitewater. These passive systems use high pressure to dissolve air into whitewater. When the pressure is released, air micro-bubbles form and attach themselves to fibers and particles, which then float to the surface where they are mechanically skimmed off. There is an economic incentive to explore alternatives to the DAF technology to drive down the cost of whitewater processing and minimize the use of chemicals. The installed capital cost for a DAF system is significant and a typical DAF system takes up considerable space. An alternative approach, which is the subject of this project, involves a dual method combining the advantages of chemical flocculation and in-line ultrasonic clarification to efficiently remove flocculated contaminants from a water stream

  4. Alternative (Potentially Green) Separations Media: Aqueous Biphasic and Related Systems Extending the Frontier Final Report For Period September 1, 2002 January 31, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Robin D

    2007-06-25

    Through the current DoE-BES funding, we have extended our fundamental understanding of the critical phase separation of aqueous polymer solutions at the molecular level, and have developed a similar understanding of their application as novel solvent systems. Our principal aims included mode of delivery of the aqueous biphasic system (ABS) solvent system and the application of this system to problems of reactive extraction. In the former case we have developed novel solid phase analogues, in the form of cross-linked polyethylene glycol hydrogels, and in the latter case we have examined the role that ABS might play in reaction engineering, with a view to greener, simpler, and safer processes. We have also developed a new salt/salt ABS and have extended our understanding of this system as well. The major outcomes are as follows: (1) Through the use of variable temperature phase diagrams, coupled with differential scanning calorimetry (DSC) measurements of the phases, a better understanding of the thermodynamics of phase formation was obtained. Evidence to the existence and role of an upper critical solution temperature (UCST) or lower critical solution temperature (LCST) (or both) in these systems was gained. With variable temperature solute partitioning, thermodynamic parameters were calculated, and inter-system comparisons were made. Through the use of Abraham's linear solvation energy regression (LSER) the solvent-solute properties of liquid/liquid ABS were examined. We have shown that ABS are indeed very tunable and LSERs have been used as a tool to compare these systems to traditional organic/water and other liquid/liquid systems. (2) We have successfully shown the development of novel reaction media for chemical synthesis and reaction; Aqueous Biphasic Reactive Extraction (ABRE). As a proof of concept, we have shown the synthesis of adipic acid from cyclohexene in an ABS, which represents an important development in the exploitation of this technology

  5. Density separation of boron particles. Final report

    International Nuclear Information System (INIS)

    Smith, R.M.

    1980-04-01

    A density distribution much broader than expected was observed in lots of natural boron powder supplied by two different sources. The material in both lots was found to have a rhombohedral crystal structure, and the only other parameters which seemed to account for such a distribution were impurities within the crystal structure and varying isotopic ratios. A separation technique was established to isolate boron particles in narrow densty ranges. The isolated fractions were subsequently analyzed for B 10 and total boron content in an effort to determine whether selective isotopic enrichment and nonhomogeneous impurity distribution were the causes for the broad density distribution of the boron powders. It was found that although the B 10 content remained nearly constant around 18%, the total boron content varied from 37.5 to 98.7%. One of the lots also was found to contain an apparently high level of alpha rhombohedral boron which broadened the density distribution considerably. During this work, a capability for removing boron particles containing gross amounts of impurities and, thereby, improving the overall purity of the remaining material was developed. In addition, the separation technique used in this study apparently isolated particles with alpha and beta rhombohedral crystal structures, although the only supporting evidence is density data

  6. Numerical study of microphase separation in gels and random media

    International Nuclear Information System (INIS)

    Uchida, Nariya

    2004-01-01

    Microphase separation in gels and random media is numerically studied using a Ginzburg-Landau model. A random field destroys long-range orientational (lamellar) order and gives rise to a disordered bicontinuous morphology. The dependence of the correlation length on the field strength is distinct from that of random-field magnets

  7. Separate P‐ and SV‐wave equations for VTI media

    KAUST Repository

    Pestana, Reynam C.; Ursin, Bjø rn; Stoffa, Paul L.

    2011-01-01

    In isotropic media we use the scalar acoustic wave equation to perform reverse time migration RTM of the recorded pressure wavefleld data. In anisotropic media P- and SV-waves are coupled and the elastic wave equation should be used for RTM. However, an acoustic anisotropic wave equation is often used instead. This results in significant shear wave energy in both modeling and RTM. To avoid this undesired SV-wave energy, we propose a different approach to separate P- and SV-wave components for vertical transversely isotropic VTI media. We derive independent pseudo-differential wave equations for each mode. The derived equations for P- and SV-waves are stable and reduce to the isotropic case. The equations presented here can be effectively used to model and migrate seismic data in VTI media where ε - δ is small. The SV-wave equation we develop is now well-posed and triplications in the SV wavefront are removed resulting in stable wave propagation. We show modeling and RTM results using the derived pure P-wave mode in complex VTI media and use the rapid expansion method REM to propagate the waveflelds in time. © 2011 Society of Exploration Geophysicists.

  8. Clinical survey on adverse reaction of contrast media, final report

    International Nuclear Information System (INIS)

    Katayama, Hitoshi; Ishida, Osamu; Osawa, Tadashi

    1988-01-01

    This report is a final analysis of adverse reactions to iodinated contrast media examined in 33,440 patients from 11 hospitals during the period from October 1983 through June 1986. Adverse reactions, such as nausea, exanthema and vomiting, to contrast media occurred in 2,523 patients (7.5 %), with the higher number occuring in patients aged 40 - 60, irrespective of sex. There were no significant alternations in vital signs. Patients positive for pretesting and having a history of allergy had higher incidences of adverse reactions (48 % and 52 %, respectively). A history of allergy is the most potential predictor for adverse reactions to contrast media. There was no definitive correlation between prior medication of contrast media and the occurrence of their adverse reactions. The relationship between the occurrence of adverse reactions and both kinds and dosage of contrast media was unknown. (Namekawa, K.)

  9. Actinides-lanthanides (neodymium) separation by electrolytical extraction in molten fluoride media; Separation actinides-lanthanides (neodyne) par extraction electrolytique en milieux fluorures fondus

    Energy Technology Data Exchange (ETDEWEB)

    Hamel, C

    2005-02-15

    The aim of this thesis is to assess the potentialities of pyrochemical processes for futur nuclear fuels and Generation IV reactors (more particularly molten salt reactors). This study concerns the Actinides-Lanthanides and Lanthanides-Solvent separation by electrolytical extraction in molten fluoride media at high temperature. Three elements are selected for this study: neodymium (NdF{sub 3}), uranium (UF{sub 4}) and plutonium (PuF{sub 3}). Firstly, the electrochemical study of these three compounds in molten fluoride media is performed to evaluate the separations. Electrodeposition processes are studied and the values of formal potentials of U(III)/U(0), Pu(III)/Pu(0) and Nd(III)/Nd(0) are obtained in LiF-CaF{sub 2} eutectic mixture. Thermodynamically, the values of potentials differences are enough to separate U-Nd and Pu-Nd with a yield of extraction of 99.99%; this value is just sufficient for the Pu-Nd separation. Concerning the Nd-solvent separation this potential difference is too small. Next, the electrodeposition of solid metals on inert electrodes is performed. This study showed that the uranium and neodymium deposits are unstable in several fluoride media. In addition, the presence of salts in the dendritic metal is observed for the U solid deposits. Finally, a reactive cathode is used to improve these separation results and the shape of the deposits. The experimental results on nickel electrodes showed an improvement of the Pu-Nd separation and the Nd-solvent separation with the depolarisation phenomenon of the metal deposit on the nickel. Moreover, U and Nd metal are stabilized in the alloy which allows the elimination of reactions with the solvent as observed for the solid deposit. The formation of liquids alloys makes also easier the recovery of these three. (author)

  10. Actinides-lanthanides (neodymium) separation by electrolytic extraction in molten fluoride media; Separation actinides-lanthanides (neodyne) par extraction electrolytique en milieux fluorures fondus

    Energy Technology Data Exchange (ETDEWEB)

    Hamel, C

    2005-02-15

    The aim of this thesis is to assess the potentialities of pyrochemical processes for future nuclear fuels and Generation IV reactors (more particularly molten salt reactors). This study concerns the Actinides-Lanthanides and Lanthanides-Solvent separation by electrolytic extraction in molten fluoride media at high temperature. Three elements are selected for this study: neodymium (NdF{sub 3}), uranium (UF{sub 4}) and plutonium (PuF{sub 3}). Firstly, the electrochemical study of these three compounds in molten fluoride media is performed to evaluate the separations. Electrodeposition processes are studied and the values of formal potentials of U(III)/U(0), Pu(III)/Pu(0) and Nd(III)/Nd(0) are obtained in LiF-CaF{sub 2} eutectic mixture. Thermodynamically, the values of potentials differences are enough to separate U-Nd and Pu-Nd with a yield of extraction of 99.99%; this value is just sufficient for the Pu-Nd separation. Concerning the Nd-solvent separation this potential difference is too small. Next, the electrodeposition of solid metals on inert electrodes is performed. This study showed that the uranium and neodymium deposits are unstable in several fluoride media. In addition, the presence of salts in the dendritic metal is observed for the U solid deposits. Finally, a reactive cathode is used to improve these separation results and the shape of the deposits. The experimental results on nickel electrodes showed an improvement of the Pu-Nd separation and the Nd-solvent separation with the depolarization phenomenon of the metal deposit on the nickel. Moreover, U and Nd metal are stabilized in the alloy which allows the elimination of reactions with the solvent as observed for the solid deposit. The formation of liquids alloys makes also easier the recovery of these three. (author)

  11. Rapid anion exchange separation of fermium with mineral acid-methyl alcohol mixed media

    International Nuclear Information System (INIS)

    Usuda, S.; Shinohara, N.; Ichikawa, S.; Suzuki, T.

    1987-01-01

    Anion exchange separation of 250 Fm (30 m) synthesized by the 12 C+ 242 Pu and 16 O+ 238 U reactions was investigated with mineral acid-methyl alcohol mixed media at elevated temperature. Fermium was chromatographically separated from the other transplutonium elements, the target materials and an Al catcher foil by anion exchange with mixtures of nitric acid and methyl alcohol. By use of the mixed media of hydrochloric acid and methyl alcohol, Fm together with Cf was separated from Al, Am, Cm, Pu, U and from major fission products. The separation systems are suitable for rapid separation and immediate alpha-counting source preparation of Fm. (author) 22 refs.; 4 figs

  12. Separation of organic azeotropic mixtures by pervaporation. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.W.

    1991-12-01

    Distillation is a commonly used separation technique in the petroleum refining and chemical processing industries. However, there are a number of potential separations involving azetropic and close-boiling organic mixtures that cannot be separated efficiently by distillation. Pervaporation is a membrane-based process that uses selective permeation through membranes to separate liquid mixtures. Because the separation process is not affected by the relative volatility of the mixture components being separated, pervaporation can be used to separate azetropes and close-boiling mixtures. Our results showed that pervaporation membranes can be used to separate azeotropic mixtures efficiently, a result that is not achievable with simple distillation. The membranes were 5--10 times more permeable to one of the components of the mixture, concentrating it in the permeate stream. For example, the membrane was 10 times more permeable to ethanol than methyl ethyl ketone, producing 60% ethanol permeate from an azeotropic mixture of ethanol and methyl ethyl ketone containing 18% ethanol. For the ethyl acetate/water mixture, the membranes showed a very high selectivity to water (> 300) and the permeate was 50--100 times enriched in water relative to the feed. The membranes had permeate fluxes on the order of 0.1--1 kg/m{sup 2}{center_dot}h in the operating range of 55--70{degrees}C. Higher fluxes were obtained by increasing the operating temperature.

  13. Germanium-76 Isotope Separation by Cryogenic Distillation. Final Report

    International Nuclear Information System (INIS)

    Stohler, Eric

    2007-01-01

    The current separation method for Germanium isotopes is electromagnetic separation using Calutrons. The Calutrons have the disadvantage of having a low separation capacity and a high energy cost to achieve the separation. Our proposed new distillation method has the advantage that larger quantities of Germanium isotopes can be separated at a significantly lower cost and in a much shorter time. After nine months of operating the column that is 1.5 meter in length, no significant separation of the isotopes has been measured. We conclude that the length of the column we have been using is too short. In addition, other packing material than the 0.16 inch Propak, 316 ss Protruded metal packing that we used in the column, should be evaluated which may have a better separation factor than the 0.16 inch Propak, 316 ss Protruded metal packing that has been used. We conclude that a much longer column - a minimum of 50 feet length - should be built and additional column packing should be tested to verify that isotopic separation can be achieved by cryogenic distillation. Even a longer column than 50 feet would be desirable.

  14. Supported ionic liquids: versatile reaction and separation media

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Haumann, Marco

    2006-01-01

    The latest developments in supported ionic liquid phase (SILP) systems for catalysis and separation technology are surveyed. The SILP concept combines the advantages of homogeneous catalysis with heterogeneous process technology, and a variety of reactions have been studied where supported ionic ...... liquid catalysts proved to be more active and selective than common systems. In separation applications the use of supported ionic liquids can facilitate selective transport of substrates across membranes.......The latest developments in supported ionic liquid phase (SILP) systems for catalysis and separation technology are surveyed. The SILP concept combines the advantages of homogeneous catalysis with heterogeneous process technology, and a variety of reactions have been studied where supported ionic...

  15. Isotope separation by chemical exchange process: Final technical report

    International Nuclear Information System (INIS)

    Schneider, A.

    1987-02-01

    The feasibility of a chemical exchange method for the separation of the isotopes of europium was demonstrated in the system EuCl 2 -EuCl 3 . The single stage separation factor, α, in this system is 1.001 or 1.0005 per mass unit. This value of α is comparable to the separation factors reported for the U 4+ - U 6 and U 3+ - Y 4+ systems. The separation of the ionic species was done by precipitation of the Eu 2+ ions or by extraction of the Eu 3+ ions with HDEHP. Conceptual schemes were developed for a countercurrent reflux cascades consisting of solvent extraction contractors. A regenerative electrocel, combining simultaneous europium reduction, europium oxidation with energy generation, and europium stripping from the organic phase is described. 32 refs., 22 figs., 6 tabs

  16. Fluid-transfer properties of recombinant battery separator media

    Energy Technology Data Exchange (ETDEWEB)

    Zguris, G.C. [Hollingsworth and Vose, Groton, MA (United States)

    2000-05-01

    The fluid-transfer properties of the separator play a critical role in both acid- and alkaline-based batteries. These properties are of particular importance in a lead-acid battery since the sulfuric acid is an active component of the battery reaction; the acid is depleted as the battery discharges. In a flooded lead-acid, the function of the separator to deliver acid is less significant than in a valve-regulated design. This paper discusses some issues with regards to this important interaction. (orig.)

  17. AIR SEPARATION BY PRESSURE SWING ADSORPTION USING SUPERIOR ADSORBENTS; FINAL

    International Nuclear Information System (INIS)

    Ralph T Yang

    2001-01-01

    Li-X zeolite (Si/Al= 1.0) is currently the best sorbent for use in the separation of air by adsorption processes. In particular, pressure swing adsorption (PSA) using zeolite sorbents is being increasingly used for air separation. Silver is also known to strongly affect the adsorptive properties of zeolites; and it is known that thermal vacuum dehydration of silver zeolites leads to the formation of silver clusters within the zeolite. In this work we have synthesized type X zeolites containing Ag and also varying mixtures of Li and Ag. In this project, we developed the Ag-containing zeolite as the best sorbent for air separation. We have also studied Co-ligand compounds as oxygen-selective sorbents. Syntheses, structural characterization and adsorption properties have been performed on all sorbents. The results are described in detail in 5 chapters

  18. Uranium isotopic separation by aerodynamic methods. Final report

    International Nuclear Information System (INIS)

    Davidovitz, P.; Anderson, J.B.; Brook, J.W.; Calia, V.S.; Greene, G.T.

    1979-06-01

    Two aerodynamic separation techniques for uranium enrichment were investigated for technical feasibility and economic viability. These techniques are known as the Jet Membrane and Velocity Slip Processes. Both analytical and laboratory studies were conducted to explore the technical feasibility of the subject processes. The Jet Membrane Process Studies demonstrated that the process was feasible and that a condensable gas carrier is available. The Velocity Slip Studies demonstrated the predicted effects and did not identify a suitable condensable gas carrier. Hence the Velocity Slip Process exhibited a larger power consumption than did the Jet Membrane Process. An independent contractor prepared detailed cost estimates of the process. The independent results indicated that, based on the same costing ground rules, the Velocity Slip process would require 16 times the fixed capital costs and 12 times the cost per separative work unit as compared to the Jet Membrane Process. The same cost structure indicated that the cost per separative work unit for the Jet Membrane process would be two to three times that for the Gas Centrifuge process. There are a number of uncertainties associated with these cost estimates, such that, in the extreme, the costs might be the same. Further, more detailed cost analysis would be required to resolve the uncertainties associated with the initial cost estimates. The conduct of new studies was not considered to be appropriate for EPRI because of the changes in enrichment program management and security philosophy discussed in the text

  19. Media Fill Test for validation of autologous leukocytes separation and labelling by (99m)Tc-HmPAO.

    Science.gov (United States)

    Urbano, Nicoletta; Modoni, Sergio; Schillaci, Orazio

    2013-01-01

    Manufacturing of sterile products must be carried out in order to minimize risks of microbiological contamination. White blood cells (WBC) labelled with (99m)Tc-exametazime ((99m)Tc-hexamethylpropyleneamine oxime; (99m)Tc-HMPAO) are being successfully applied in the field of infection/inflammation scintigraphy for many years. In our radiopharmacy lab, separation and labelling of autologous leukocytes with (99m)Tc-HMPAO were performed in a laminar flow cabinet not classified and placed in a controlled area, whereas (99m)Tc-HMPAO radiolabelling procedure was carried out in a hot cell with manipulator gloves. This study was conducted to validate this process using a Media Fill simulation test. The study was performed using sterile Tryptic Soy Broth (TSB) in place of active product, reproducing as closely as possible the routine aseptic production process with all the critical steps, as described in the our internal standard operative procedures (SOP). The final vials containing the media of each processed step were then incubated for 14 days and examined for the evidence of microbial growth. No evidence of turbidity was observed in all the steps assayed by the Media Fill. In the separation and labelling of autologous leukocytes with (99m)Tc-HmPAO, Media-Fill test represents a reliable tool to validate the aseptic process. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. Entropy-induced separation of star polymers in porous media

    International Nuclear Information System (INIS)

    Blavats'ka, V.; Ferber, C. von; Holovatch, Yu.

    2006-01-01

    We present a quantitative picture of the separation of star polymers in a solution where part of the volume is influenced by a porous medium. To this end, we study the impact of long-range-correlated quenched disorder on the entropy and scaling properties of f-arm star polymers in a good solvent. We assume that the disorder is correlated on the polymer length scale with a power-law decay of the pair correlation function g(r)∼r -a . Applying the field-theoretical renormalization group approach we show in a double expansion in ε=4-d and δ=4-a that there is a range of correlation strengths δ for which the disorder changes the scaling behavior of star polymers. In a second approach we calculate for fixed space dimension d=3 and different values of the correlation parameter a the corresponding scaling exponents γ f that govern entropic effects. We find that γ f -1, the deviation of γ f from its mean field value is amplified by the disorder once we increase δ beyond a threshold. The consequences for a solution of diluted chain and star polymers of equal molecular weight inside a porous medium are that star polymers exert a higher osmotic pressure than chain polymers and in general higher branched star polymers are expelled more strongly from the correlated porous medium. Surprisingly, polymer chains will prefer a stronger correlated medium to a less or uncorrelated medium of the same density while the opposite is the case for star polymers

  1. EDUCATIONAL MEDIA (TV) FOR THE PRESCHOOL CHILD. FINAL REPORT.

    Science.gov (United States)

    BECK, LESTER F.

    THE PHILOSOPHY AND CONTENT OF EIGHT EDUCATIONAL TV SERIES FOR PRESCHOOL CHILDREN WERE DESCRIBED BY THE PEOPLE WHO CREATED THEM. PHOTOGRAPHS ARE INCLUDED TO ILLUSTRATE THE USE OF EDUCATIONAL MEDIA - STILL PICTURES, FILMS, GRAPHIC AIDS, MODELS, PUPPETS, AND PICTURE BOOKS - IN ASSOCIATION WITH TELEVISION. THE PAPERS THAT MADE UP THIS REPORT INCLUDED…

  2. Uranium isotope separation in the solid state. Final report for period ending September 30, 1978

    International Nuclear Information System (INIS)

    Bernstein, E.R.

    1978-09-01

    The final results of an investigation on the isotope separation of uranium in the solid state are presented in this report. The feasibility of separating uranium isotopes using the proposed system based on uranium borohydride (borodeuteride) in a low temperature mixed crystal has been determined. The first section of the report summarizes the background material relating to this work which includes: a calculation of isotope shifts (borodeuteride), details on the two-step, two-photon spectroscopic isotope separation technique, and a brief overview of the method and equipment used for separating uranium isotopes in the solid state. The second section concerns the experimental details of the present work performed in the laboratory. Representative spectroscopic data obtained in this investigation are presented and discussed in the third section. Finally, the report is concluded with recommendations for further investigations on the uranium borohydride (borodeuteride) system for isotope separation

  3. Search for chemical separations of the element 106 homologues in HF and HF-HCl media

    International Nuclear Information System (INIS)

    Trubert, D.; Monroy-Guzman, F.; Hussonnois, M.; Brillard, L.; Le Naour, C.; Constantinescu, O.

    1996-01-01

    In order to study the chemical properties of element 263 106 in aqueous media, fast, efficient and reproducible chromatographic separations were tested on its assumed homologous: Mo, W and U. Corroborative static and dynamic off-line experiments have shown that after fixation of these three elements on anion-exchange resin in HF medium, selective elution could be achieved by using suitable concentration of HCl - HF and HCl solutions. Separations of short-lived W isotopes, produced through heavy ion irradiation were also performed on-line. (author). 27 refs., 14 figs

  4. High-functionalization of fiber-forming materials. Polymer membrane as separation media

    Energy Technology Data Exchange (ETDEWEB)

    Kamide, Kenji; Iijima, Hideki (Asahi Chemical Industry Co. Ltd., Osaka, (Japan))

    1989-07-05

    For obtaining higher functions by donating specific functions to the fiber, it is effective to change its structure. Various separating films which is known as an example of the high-functionalization of the fiber materials is an example of the fiber structure conversion from the view-point of substance-permeating function. This report firstly describes the features and types of the film separation method and the production of films, and then on the correlation between the structure and functions of the fibers, the correlation of the structure and the separating characteristics of the films, and the mechanism of the emergence of the film structure. Finally, applied examples of the film separating method in the medical field are described. In the medical liquid film separation, blood or plasma are the object of the separation. Blood has various components whose concentration and particle size are multiplicated, and yet requires a tremendous separating accuracy when compared with the industrial separation. Examples are a blood dialyzer film and an ultrafiltration film (film for plasma separation and virus separation), etc.. 28 refs., 6 figs., 2 tabs.

  5. Study of electrochemical processes for separation of the actinides and lanthanides in molten fluoride media

    International Nuclear Information System (INIS)

    Zvejskova, R.; Chuchvalcova Bimova, K.; Lisy, F.; Soucek, P.

    2005-01-01

    The technology of the Molten Salt Reactors (MSR) is developed for two possible applications: For one thing as the Molten Salt Transmutation Reactor (MSTR) incinerating plutonium and minor actinides within reprocessing of spent fuel from PWR or FBR and for another thing as electricity generating MSR working under thorium uranium fuel cycle. Electrochemical separation processes are one of promising pyrochemical techniques that should enable the on-line reprocessing of circulating fuel salt in MSR (fuel cycle back-end). The former application represents the Czech P and T concept, in which framework the electrolytic separation can be applied both in the front-end and back-end of the MSTR fuel cycle. Within the front-end electro separation should follow the Fluoride Volatility Method (FVM), which should separate 95 % of uranium from the spent fuel in the form of volatile uranium hexafluoride. The residual uranium and fission products (FP) are supposed to be separated among others also by electrochemical methods. The presented work comprises the results reached within development of electrochemical separation of the actinides and fission products from each other by electrolytic deposition method on solid cathode in molten fluoride media, that represent he carrier salts of MSR technology. The knowledge of electrochemical properties (red-ox potentials, mainly of deposition potentials) is necessary for determination of separation possibilities of individual components by electrolysis. (authors)

  6. Interface physics in microporous media : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Knutson, Chad E.; Noble, David R.; Aragon, Alicia R.; Chen, Ken Shuang; Giordano, Nicholas J. (Purdue University, West Lafayette, IN); Brooks, Carlton, F.; Pyrak-Nolte, Laura J. (Purdue University, West Lafayette, IN); Liu, Yihong (Purdue University, West Lafayette, IN)

    2008-09-01

    This document contains a summary of the work performed under the LDRD project entitled 'Interface Physics in Microporous Media'. The presence of fluid-fluid interfaces, which can carry non-zero stresses, distinguishes multiphase flows from more readily understood single-phase flows. In this work the physics active at these interfaces has been examined via a combined experimental and computational approach. One of the major difficulties of examining true microporous systems of the type found in filters, membranes, geologic media, etc. is the geometric uncertainty. To help facilitate the examination of transport at the pore-scale without this complication, a significant effort has been made in the area of fabrication of both two-dimensional and three-dimensional micromodels. Using these micromodels, multiphase flow experiments have been performed for liquid-liquid and liquid-gas systems. Laser scanning confocal microscopy has been utilized to provide high resolution, three-dimensional reconstructions as well as time resolved, two-dimensional reconstructions. Computational work has focused on extending lattice Boltzmann (LB) and finite element methods for probing the interface physics at the pore scale. A new LB technique has been developed that provides over 100x speed up for steady flows in complex geometries. A new LB model has been developed that allows for arbitrary density ratios, which has been a significant obstacle in applying LB to air-water flows. A new reduced order model has been developed and implemented in finite element code for examining non-equilibrium wetting in microchannel systems. These advances will enhance Sandia's ability to quantitatively probe the rich interfacial physics present in microporous systems.

  7. Review and assessment of technologies for the separation of strontium from alkaline and acidic media

    International Nuclear Information System (INIS)

    Orth, R.J.; Kurath, D.E.

    1994-01-01

    A literature survey has been conducted to identify and evaluate methods for the separation of strontium from acidic and alkaline media as applied to Hanford tank waste. The most promising methods of solvent extraction, precipitation, and ion exchange are described. The following criteria were used for evaluating the separation methods: Appreciable strontium removal must be demonstrated; Strontium selectivity over bulk components must be demonstrated; The method must show promise for evolving into a practical and fairly simple process; The process should be safe to operate; The method must be robust (i.e., capable of separating strontium from various waste types); Secondary waste generation must be minimized; and The method must show resistance to radiation damage. The methods discussed did not necessarily satisfy all of the above criteria; thus, key areas requiring further development are also given for each method. Less promising solvent extraction, precipitation, and ion exchange methods were also identified; areas for potential development are included in this report

  8. Smart surfaces with switchable superoleophilicity and superoleophobicity in aqueous media: Toward controllable oil/water separation

    KAUST Repository

    Zhang, L.

    2012-02-01

    Advanced materials with surfaces that have controllable oil wettability when submerged in aqueous media have great potential for various underwater applications. Here we have developed smart surfaces on commonly used materials, including non-woven textiles and polyurethane sponges, which are able to switch between superoleophilicity and superoleophobicity in aqueous media. The smart surfaces are obtained by grafting a block copolymer, comprising blocks of pH-responsive poly(2-vinylpyridine) and oleophilic/hydrophobic polydimethylsiloxane (i.e., P2VP-b-PDMS) on these materials. The P2VP block can alter its wettability and its conformation via protonation and deprotonation in response to the pH of the aqueous media, which provides controllable and switchable access of oil by the PDMS block, resulting in the switchable surface oil wettability in the aqueous media. On the other hand, the high flexibility of the PDMS block facilitates the reversible switching of the surface oil wettability. As a proof of concept, we also demonstrate that materials functionalized with our smart surfaces can be used for highly controllable oil/water separation processes.

  9. Microsystems for anion exchange separation of radionuclides in nitric acid media

    Energy Technology Data Exchange (ETDEWEB)

    Losno, M.; Brennetot, R.; Mariet, C. [DEN/Service d' Etudes Analytiques et de Reactivite des Surfaces - SEARS, CEA, Centre de Saclay, Universite Paris-Saclay, F-91191, Gif sur Yvette (France); Ferrante, I.; Descroix, S. [MMBM Group, Institut Curie Research Center, CNRS UMR 168, Paris (France)

    2016-07-01

    An efficient and reproducible photo-polymerized poly(ethylene glycol methacrylate methacrylate-co- allyl methacrylate) monolith was synthesized and a photo-grafting process based on the ene-thiol click-chemistry has been performed to give anion exchange properties to the monolith. Since their introduction in the early 1990's polymethacrylate monoliths have emerged as a powerful alternative for microscale separations or sample treatment. Their relatively simple implementation in columns with small internal diameters makes them particularly attractive for the new chromatographic challenges of complex matrices analysis and on-chip separations. Despite their relatively poor ion-exchange capacity due to their highly porous structure, their use as anion exchangers is of large interest for nuclear analysis as numerous separations are based on this process. This paper presents a systematic study of the synthesis of the polymeric porous monolith and the versatile and robust functionalization method developed for the specific strong acidic media used in radiochemical procedures. The robustness of the stationary phase was tested in concentrated nitric acid. It appears that the C-S bond formed via thiol-ene chemistry is strong enough to be used to graft function of interest for separation in strong nitric acid medium. The photo-grafted anion exchanger, a quaternary ammonium, presents sufficient resistance to be used for radionuclide separation in [HNO{sub 3}]=5 mol.L{sup -1}so the next step is its integration in the cyclo olefin copolymer (COC) micro-system.

  10. Gravity packaging final waste recovery based on gravity separation and chemical imaging control.

    Science.gov (United States)

    Bonifazi, Giuseppe; Serranti, Silvia; Potenza, Fabio; Luciani, Valentina; Di Maio, Francesco

    2017-02-01

    Plastic polymers are characterized by a high calorific value. Post-consumer plastic waste can be thus considered, in many cases, as a typical secondary solid fuels according to the European Commission directive on End of Waste (EoW). In Europe the practice of incineration is considered one of the solutions for waste disposal waste, for energy recovery and, as a consequence, for the reduction of waste sent to landfill. A full characterization of these products represents the first step to profitably and correctly utilize them. Several techniques have been investigated in this paper in order to separate and characterize post-consumer plastic packaging waste fulfilling the previous goals, that is: gravity separation (i.e. Reflux Classifier), FT-IR spectroscopy, NIR HyperSpectralImaging (HSI) based techniques and calorimetric test. The study demonstrated as the proposed separation technique and the HyperSpectral NIR Imaging approach allow to separate and recognize the different polymers (i.e. PolyVinyl Chloride (PVC), PolyStyrene (PS), PolyEthylene (PE), PoliEtilene Tereftalato (PET), PolyPropylene (PP)) in order to maximize the removal of the PVC fraction from plastic waste and to perform the full quality control of the resulting products, can be profitably utilized to set up analytical/control strategies finalized to obtain a low content of PVC in the final Solid Recovered Fuel (SRF), thus enhancing SRF quality, increasing its value and reducing the "final waste". Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Separation of oil palm shell and kernel by using kaolinite media

    Directory of Open Access Journals (Sweden)

    Sukpong Sirinupong

    2003-05-01

    Full Text Available The objective of this research is to investigate the possibility of using kaolinite from Ranong province as media in the oil palm shell and kernel separation process by means of heavy media separation. The effect of specific gravity of the slurry, type and amount of dispersant and type of clays on suspension of media and efficiency of separation were studied. It was found that the specific gravity of oil palm shell and kernel are 1.40 and 1.20 respectively. While the average specific gravity of kaolinite grade MRD-B85, RANONG-325 and commercial clay from Univanich Group. PCL., are 2.54, 2.65 and 2.46 respectively. It was apparent that the viscosity of clay slurry increased with the specific gravity of the slurry. For MRD-B85 and RANONG- 325 clays which have the average particle sizes of 10 and 12 microns, the pH of their slurries of about 5.84 and 6.33 respectively were obtained and at these conditions stability of the slurry rarely occurred and they could not be used for separation. However, these clays can also be utilized as media when dispersant such asCalgon or sodium silicate is applied to their slurries. It was found that the efficiency of separation depends on specific gravity and viscosity of the slurry, type and particle size of kaolinite and dosage of dispersant. The optimum separating conditions for MRD-B85 clay were the dosage of Calgon of 0.15% (or 1.5 kg/t of clay at the specific gravity of the slurry of 1.20-1.24 (27-32% Solids in which a pH of 6.14 and viscosity of 104 cP to very low value (could not be measured were obtained. Thus, kernel yielded 97.57-100% and shell contamination of 1.48-6.32% was achieved. While sodium silicate was applied to the slurry about 0.15% at the specific gravity of 1.22, pH of 6.74 and viscosity of 238 cP were obtained and kernel could be recovered 100% with shell contamination of 8.36%. When 0.15% Calgon or 0.25% sodium silicate was introduced to the RANONG-325 clay slurry at the specific gravity

  12. Separation of milk fat globules via microfiltration: Effect of diafiltration media and opportunities for stream valorization.

    Science.gov (United States)

    Jukkola, A; Partanen, R; Rojas, O J; Heino, A

    2016-11-01

    Milk fat globule membranes (MFGM) sourced in buttermilk have gained recent interest given their nutritional value and functional properties. However, production of isolated MFGM has been challenging given their size similarity with casein micelles, which limits attempts toward fractionation by size exclusion techniques. Therefore, the hypothesis underpinning this study is that the removal of proteins from cream before butter-making facilitates MFGM isolation. As such, milk fat globules were separated from raw whole milk via microfiltration (1.4-µm pore diameter and 0.005-m 2 filtration surface area) by using 3 diafiltration media; namely, skim milk ultrafiltration permeate, saline, and water. Their effects on the stability of the milk fat globules and protein permeation was elucidated. Whereas a substantial reduction in protein concentration was achieved with all diafiltration media (~90% reduction), water and saline produced negligible membrane fouling with better filtration performance. Moreover, diafiltration with skim milk ultrafiltration permeate exhibited reduced permeate flux. Colloidal stability of the resultant milk decreased with all diafiltration solutions due to changing composition and reduced apparent viscosity. Overall, microfiltration was found to be an efficient method for separation of milk fat globules from whole milk, leading to increased MFGM fragment concentration in buttermilk dry matter, thus making it more suitable for industrial utilization. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  13. Extraction and separation of molybdenum and vanadium from acidic and alkaline media using tertiary and quaternary amines

    International Nuclear Information System (INIS)

    Stas, J.; Dahdouh, A.; Rizkallah, I.

    2010-01-01

    phases (TDA and QA) with several stripping agents (H 2 SO 4 , (NH 4 ) 2 SO 4 , (NH 4 ) 2 CO 3 , Na 2 CO 3 , NaOH) has been studied and it was found that NaOH is the best stripping media for both extractants but with more difficulties for the quaternary amine methyl trioctyl ammonium chloride. Finally, it has been suggested two flowsheets for vanadium separation from molybdenum using TDA and QA. (author)

  14. Studies of elasticity, sound propagation and attenuation of acoustic modes in granular media: final report

    Energy Technology Data Exchange (ETDEWEB)

    Makse, Hernan A. [City College of New York, NY (United States). Levich Inst., Dept. of Physcis; Johnson, David L. [Schlumberger-Doll Research, Cambridge, MA (United States)

    2014-09-03

    This is the final report describing the results of DOE Grant # DE-FG02-03ER15458 with original termination date of April 31, 2013, which has been extended to April 31, 2014. The goal of this project is to develop a theoretical and experimental understanding of sound propagation, elasticity and dissipation in granular materials. The topic is relevant for the efficient production of hydrocarbon and for identifying and characterizing the underground formation for storage of either CO2 or nuclear waste material. Furthermore, understanding the basic properties of acoustic propagation in granular media is of importance not only to the energy industry, but also to the pharmaceutical, chemical and agricultural industries. We employ a set of experimental, theoretical and computational tools to develop a study of acoustics and dissipation in granular media. These include the concept effective mass of granular media, normal modes analysis, statistical mechanics frameworks and numerical simulations based on Discrete Element Methods. Effective mass measurements allow us to study the mechanisms of the elastic response and attenuation of acoustic modes in granular media. We perform experiments and simulations under varying conditions, including humidity and vacuum, and different interparticle force-laws to develop a fundamental understanding of the mechanisms of damping and acoustic propagation in granular media. A theoretical statistical approach studies the necessary phase space of configurations in pressure, volume fraction to classify granular materials.

  15. Studies on rapid ion-exchange separation of the transplutonium elements with mineral acid-methanol mixed media

    International Nuclear Information System (INIS)

    Usuda, Shigekazu

    1989-03-01

    In order to study properties of short-lived transplutonium nuclides synthesized by heavy-ion bombardment, three methods for rapid separation of tri-valent transplutonium elements by ion-exchange chromatography with mineral acid-methanol mixed media at elevated temperature were investigated. The first separation method was anion-exchange chromatography with nitric acid-methanol mixed media. The second method was anion-exchange choromatography with dilute hydrochloric acid-methanol mixed media. The third method was improved cation-exchange chromatography with single-column operation using the mixed media of hydrochloric acid and methanol. The separation methods developed were found applicable to studies on synthesis of the trans-plutonium nuclides, 250 Fm (T 1/2 :30 min), 244,245,246 Cf (T 1/2 :20 min, 46 min and 35.7 h, respectively) from the 16 O + 238 U and 12 C + 242 Pu reactions, and on the decay property of 245 Cf. Attempts to search for new actinide nuclides, such as 240 U and neutron deficient nuclides of Am, Cm and Bk, were made by a quick purification. The separation system was also applied to the rapid and effective separation of Nd, Am and Cm from spent nuclear fuel samples, for burn-up determination. (J.P.N.) 242 refs

  16. Anion exchange separation of the light lanthanoids with nitric acid-methyl alcohol mixed media at elevated temperature

    International Nuclear Information System (INIS)

    Usuda, S.; Magara, M.

    1987-01-01

    Anion exchange chromatography with nitric acid-methyl alcohol mixed media at elevated temperature was applied to mutual separation of the light lanthanoids, La, Ce, Pr, Nd and Pm. The individual elements could be effectively separated from each other, main fission products and actinoids with 0.01M HNO 3 -90% CH 3 OH or 0.5M HNO 3 -80% CH 3 OH eluent at 90 deg C. (author) 14 refs.; 3 tables

  17. Second space Christmas for ESA: Huygens to begin its final journey to Titan/ Media activities.

    Science.gov (United States)

    2004-12-01

    the morning of 25 December at about 05:08 CET. Since the Cassini orbiter will have to achieve precise pointing for the release, there will be no real-time telemetry available until it turns back its main antenna toward Earth and beams the recorded data of the release. It will take over an hour (67 min) for the signals to reach us on Earth. The final data confirming the separation will be available later on Christmas Day. After release, Huygens will move away from Cassini at a speed of about 35 cm per second and, to keep on track, will spin on its axis, making about 7 revolutions a minute. Huygens will not communicate with Cassini for the whole period until after deployment of the main parachute following entry into Titan’s atmosphere. On 28 December Cassini will then manoeuvre off collision course to resume its mission and prepare itself to receive Huygens data, which it will record for later playback to Earth. Huygens will remain dormant until a few hours before its arrival at Titan on 14 January. The entry into the atmosphere is set for 11:15 CET. Huygens is planned to complete its descent in about two hours and 15 minutes, beaming back its science data to the Cassini orbiter for replay to Earth later in the afternoon. If Huygens, which is designed as an atmospheric probe rather than a lander, survives touchdown on the surface, it could deliver up to 2 hours of bonus data before the link with Cassini is lost. Direct radio signals from Huygens will reach Earth after 67 minutes of interplanetary travel at the speed of light. An experiment has been set up by radio scientists that will use an array of radio telescopes around the Pacific to attempt to detect a faint tone from Huygens. If successful, early detection is not expected before around 11:30 CET. The European Space Agency owns and manages the Huygens probe and is in charge of operations of the probe from its control centre in Darmstadt, Germany. NASA's Jet Propulsion Laboratory in Pasadena, California

  18. Study of the separation of metallic compounds by means of an anion exchanger resin and of complexing media

    International Nuclear Information System (INIS)

    Denis de Trobriand, Anne

    1971-01-01

    In order to define better separation conditions of molybdenum and aluminium from uranium alloys, this research thesis first reports the study of the fixation of each of these elements on a Dowex resin in a carbonate medium. Results obtained by other studies in a hydrogen carbonate medium has leaded to the use of mixing of CO 3 2- and HCO 3 - . In a last part, the author reports the analysis of two samples (uranium-molybdenum and uranium-aluminium): after an attack of these alloys in a melt carbonate medium, components are separated by elution in one of the studied media

  19. Laser enhanced microwave plasma isotope separation. Final report, September 30, 1992--September 29, 1995

    International Nuclear Information System (INIS)

    Brake, M.L.; Gilgenbach, R.M.

    1996-06-01

    The experimental research was to focus on laser excitation of a low abundance isotope and then ionize and separate the isotope of low abundance using a microwave/ECR discharge at 2.45 GHz. A small compact electron cyclotron resonance ion source, which uses permanent magnets, was constructed during this project. The dye laser was purchased and later an excimer laser had to also be purchased because it turned out that the dye laser could not be pumped by our copper laser. It was intended that the dye laser be tuned to a wavelength of 670.8 nm, which would excite 6 Li which would then be preferentially ionized by the ECR source and collected with a charged grid. The degree of enrichment was to be determined using thermal ionization mass spectrometry. The final objective of this project was to assess the feasibility of this system to large-scale production of stable isotopes. However the funding of this project was interrupted and we were not able to achieve all of our goals

  20. Smart surfaces with switchable superoleophilicity and superoleophobicity in aqueous media: Toward controllable oil/water separation

    KAUST Repository

    Zhang, L.; Zhang, Z.; Wang, Peng

    2012-01-01

    Advanced materials with surfaces that have controllable oil wettability when submerged in aqueous media have great potential for various underwater applications. Here we have developed smart surfaces on commonly used materials, including non

  1. Who owns the images? Image politics and media criticism in theater: a separation of powers

    NARCIS (Netherlands)

    Röttger, K.; Jackob, A.

    2007-01-01

    This article investigates the ownership of images analyzing not only the place and mode of image circulation, but also the question of who can access these images under what circumstances. It is not only concerned with the technical or electronic media that are often held responsible for the

  2. Separation of Olefin/Paraffin Mixtures with Carrier Facilitated Membrane Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Merkel, T.C.; Blanc, R.; Zeid, J.; Suwarlim, A.; Firat, B.; Wijmans, H.; Asaro, M. (SRI); Greene, M.(Lummus)

    2007-03-12

    This document describes the results of a DOE funded joint effort of Membrane Technology and Research Inc. (MTR), SRI International (SRI), and ABB Lummus (ABB) to develop facilitated transport membranes for olefin/paraffin separations. Currently, olefin/paraffin separation is done by distillation—an extremely energy-intensive process because of the low relative volatilities of olefins and paraffins. If facilitated transport membranes could be successfully commercialized, the potential energy savings achievable with this membrane technology are estimated to be 48 trillion Btu per year by the year 2020. We discovered in this work that silver salt-based facilitated transport membranes are not stable even in the presence of ideal olefin/paraffin mixtures. This decline in membrane performance appears to be caused by a previously unrecognized phenomenon that we have named olefin conditioning. As the name implies, this mechanism of performance degradation becomes operative once a membrane starts permeating olefins. This project is the first study to identify olefin conditioning as a significant factor impacting the performance of facilitated olefin transport membranes. To date, we have not identified an effective strategy to mitigate the impact of olefin conditioning. other than running at low temperatures or with low olefin feed pressures. In our opinion, this issue must be addressed before further development of facilitated olefin transport membranes can proceed. In addition to olefin conditioning, traditional carrier poisoning challenges must also be overcome. Light, hydrogen, hydrogen sulfide, and acetylene exposure adversely affect membrane performance through unwanted reaction with silver ions. Harsh poisoning tests with these species showed useful membrane lifetimes of only one week. These tests demonstrate a need to improve the stability of the olefin complexing agent to develop membranes with lifetimes satisfactory for commercial application. A successful effort

  3. SEPARATION OF HAZARDOUS ORGANICS BY LOW PRESSURE REVERSE OSMOSIS MEMBRANES - PHASE II FINAL REPORT

    Science.gov (United States)

    Extensive experimental studies showed that thin-film, composite membranes can be used effectively for the separation of selected hazardous organic compounds. This waste treatment technique offers definite advantages in terms of high solute separations at low pressures (<2MPa) and...

  4. A fast pointwise strategy for anisotropic wave-mode separation in TI media

    KAUST Repository

    Liu, Qiancheng

    2017-08-17

    The multi-component wavefield contains both compressional and shear waves. Separating wave-modes has many applications in seismic workflows. Conventionally, anisotropic wave-mode separation is implemented by either directly filtering in the wavenumber domain or nonstationary filtering in the space domain, which are computationally expensive. These methods could be categorized into the pseudo-derivative family and only work well within Finite Difference (FD) methods. In this paper, we establish a relationship between group-velocity direction and polarity direction and propose a method, which could go beyond modeling by FD. In particular, we are interested in performing wave-mode separation in a Spectral Element Method (SEM), which is widely used for seismic wave propagation on various scales. The separation is implemented pointwise, independent of its neighbor points, suitable for running in parallel. Moreover, no correction for amplitude and phase changes caused by the derivative operator is required. We have verified our scheme using numerical examples.

  5. A fast pointwise strategy for anisotropic wave-mode separation in TI media

    KAUST Repository

    Liu, Qiancheng; Peter, Daniel; Lu, Yongming

    2017-01-01

    The multi-component wavefield contains both compressional and shear waves. Separating wave-modes has many applications in seismic workflows. Conventionally, anisotropic wave-mode separation is implemented by either directly filtering in the wavenumber domain or nonstationary filtering in the space domain, which are computationally expensive. These methods could be categorized into the pseudo-derivative family and only work well within Finite Difference (FD) methods. In this paper, we establish a relationship between group-velocity direction and polarity direction and propose a method, which could go beyond modeling by FD. In particular, we are interested in performing wave-mode separation in a Spectral Element Method (SEM), which is widely used for seismic wave propagation on various scales. The separation is implemented pointwise, independent of its neighbor points, suitable for running in parallel. Moreover, no correction for amplitude and phase changes caused by the derivative operator is required. We have verified our scheme using numerical examples.

  6. Review and assessment of technologies for the separation of cesium from acidic media

    Energy Technology Data Exchange (ETDEWEB)

    Orth, R.J.; Brooks, K.P.; Kurath, D.E.

    1994-09-01

    A preliminary literature survey has been conducted to identify and evaluate methods for the separation of cesium from acidic waste. The most promising solvent extraction, precipitation, and ion exchange methods, along with some of the attributes for each method, are listed. The main criteria used in evaluating the separation methods were as follows: (1) good potential for cesium separation must be demonstrated (i.e., cesium decontamination factors on the order of 50 to 100). (2) Good selectivity for cesium over bulk components must be demonstrated. (3) The method must show promise for evolving into a practical and fairly simple process. (4) The process should be safe to operate. (5) The method must be robust (i.e., capable of separating cesium from various acidic waste types). (6) Secondary waste generation must be minimized. (7) The method must show resistance to radiation damage. The most promising separation methods did not necessarily satisfy all of the above criteria, thus key areas requiring further development are suggested for each method. The report discusses in detail these and other areas requiring further development, as well as alternative solvent extraction, precipitation, ion exchange, and {open_quote}other{close_quote} technologies that, based on current information, show less promise for the separation of cesium from acidic wastes because of significant process limitations. When appropriate, the report recommends areas of future development.

  7. f-Element Ion Chelation in Highly Basic Media - Final Report

    International Nuclear Information System (INIS)

    Paine, R.T.

    2000-01-01

    A large body of data has been collected over the last fifty years on the chemical behavior of f-element ions. The ions undergo rapid hydrolysis reactions in neutral or basic aqueous solutions that produce poorly understood oxide-hydroxide species; therefore, most of the fundamental f-element solution chemistry has allowed synthetic and separations chemists to rationally design advanced organic chelating ligands useful for highly selective partitioning and separation of f-element ions from complex acidic solution matrices. These ligands and new examples under development allow for the safe use and treatment of solutions containing highly radioactive species. This DOE/EMSP project was undertaken to address the following fundamental objectives: (1) study the chemical speciation of Sr and lanthanide (Ln) ions in basic aqueous media containing classical counter anions found in waste matrices; (2) prepare pyridine N-oxide phosphonates and phosphonic acids that might act as selective chelator s for Ln ions in model basic pH waste streams; (3) study the binding of the new chelators toward Ln ions and (4) examine the utility of the chelators as decontamination and dissolution agents under basic solution conditions. The project has been successful in attacking selected aspects of the very difficult problems associated with basic pH solution f-element waste chemistry. In particular, the project has (1) shed additional light on the initial stages of Ln ion sol-gel-precipitate formulation under basic solution conditions; (2) generated new families of pyridine phosphonic acid chelators; (3) characterized the function of the chelators and (4) examined their utility as oxide-hydroxide dissolution agents. These findings have contributed significantly to an improved understanding of the behavior of Ln ions in basic media containing anions found in typical waste sludges as well as to the development of sludge dissolution agents. The new chelating reagents are easily made and could be

  8. Cost analysis of lasers for a laser isotope separation system. Final report

    International Nuclear Information System (INIS)

    Mail, R.A.; Markovich, F.J.; Carr, R.H.

    1977-01-01

    To be of practical significance, laser isotope separation (LIS) for separation of 235 U from 238 U must exhibit attributes which make it preferable to expansion of the present facilities. Clearly the most attractive such attribute is the prospect of significant cost reductions, which preliminary studies at LLL suggest will amount to a factor of three and perhaps as much as ten. From these preliminary studies, it appears that the lasers themselves account for a very substantial portion of the capital cost of a LIS system, and a significant portion of the equipment replacement costs. Since the laser costs are so pivotal to the system cost, and the system cost is so pivotal to the choice of separation techniques, it is clear that a more detailed investigation of laser costs is required. Results are presented of a study performed by General Research Corporation (GRC) to assess the cost of lasers in a production laser isotope separation (LIS) plant

  9. Application of radiation grafted media for lectin affinity separation and urease immobilization: a novel approach to tumor therapy and renal disease diagnosis

    International Nuclear Information System (INIS)

    Mueller-Schulte, D.; Daschek, W.

    1995-01-01

    Carriers modified by synergistic radiation grafting are used as affinity media for the separation of a lectin from a mistletoe extract. The grafted supports show distinctly superior properties when compared to conventional affinity media. The application of these carriers as urease immobilization support incorporated in a conductimetric bioreactor for urea analysis as potential diagnostic device in renal diseases is also described. (Author)

  10. TAILORING INORGANIC SORBENTS FOR SRS STRONTIUM AND ACTINIDE SEPARATIONS: OPTIMIZED MONOSODIUM TITANATE PHASE II FINAL REPORT

    International Nuclear Information System (INIS)

    Hobbs, D; Thomas Peters, T; Michael Poirier, M; Mark Barnes, M; Major Thompson, M; Samuel Fink, S

    2007-01-01

    This document provides a final report of Phase II testing activities for the development of a modified monosodium titanate (MST) that exhibits improved strontium and actinide removal characteristics compared to the baseline MST material. The activities included determining the key synthesis conditions for preparation of the modified MST, preparation of the modified MST at a larger scale by a commercial vendor, demonstration of the strontium and actinide removal characteristics with actual tank waste supernate and measurement of filtration characteristics. Key findings and conclusions include the following. Testing evaluated three synthetic methods and eleven process parameters for the optimum synthesis conditions for the preparation on an improved form of MST. We selected the post synthesis method (Method 3) for continued development based on overall sorbate removal performance. We successfully prepared three batches of the modified MST using Method 3 procedure at a 25-gram scale. The laboratory prepared modified MST exhibited increased sorption kinetics with simulated and actual waste solutions and similar filtration characteristics to the baseline MST. Characterization of the modified MST indicated that the post synthesis treatment did not significantly alter the particle size distribution, but did significantly increase the surface area and porosity compared to the original MST. Testing indicated that the modified MST exhibits reduced affinity for uranium compared to the baseline MST, reducing risk of fissile loading. Shelf-life testing indicated no change in strontium and actinide performance removal after storing the modified MST for 12-months at ambient laboratory temperature. The material releases oxygen during the synthesis and continues to offgas after the synthesis at a rapidly diminishing rate until below a measurable rate after 4 months. Optima Chemical Group LLC prepared a 15-kilogram batch of the modified MST using the post synthesis procedure (Method

  11. Separation and immobilization of Sr and Cs contained in acidic media by using inorganic ion-exchangers. Literature survey

    Energy Technology Data Exchange (ETDEWEB)

    Yamagishi, Isao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-07-01

    The present study deals with the survey of inorganic ion-exchangers suitable for separation and immobilization of Sr and Cs contained in acidic high-level liquid waste. The stabilities of published waste forms and their preparation processes were evaluated from the standpoint of conversion of exchangers containing Sr and Cs into appropriate waste forms. The essential results are below. (1) For separation and immobilization of Cs, crystalline silicotitanate seems to be the most promising exchanger. Insoluble ferrocyanides and phosphates are not suitable for immobilization without additives. Mordenite is inexpensive and commercially available but it would dissolve in highly acidic media. (2) For selective separation of Sr, there is no promising exchanger up to now. It is necessary either to modify separation condition or to synthesize a novel exchanger. (3) Soluble salts, glasses and ceramics are proposed as a storage or disposal form of separated Sr and Cs. Ceramics sintered by hot-pressing are favorable waste forms of inorganic ion-exchangers but their leachabilities and thermal conductivities are largely influenced by qualities of products. Crystallinity of a sintered exchanger depends on its composition. Exchanges of low Cs contents are often converted into amorphous materials whose chemical stabilities depend on solubilities of components of exchangers. (4) A new exchanger to be synthesized is crystalline and selective toward Sr and Cs. One meq/g is enough for Sr and Cs capacities, which are restricted by thermal and transmutation effects. Composition of the exchanger should be selected from the point of a scenario of separation and disposal. The solubilities of SiO{sub 2}, TiO{sub 2}, ZrO{sub 2}, Nb{sub 2}O{sub 5} and Ta{sub 2}O{sub 5} are low in acidic media and those of Al{sub 2}O{sub 3}, TiO{sub 2} and ZrO{sub 2}, in disposal circumstances. (5) Future works are optimization of separation scheme including development of exchangers, simplification of

  12. Final Evaluation of Assignment: Media Literacy. A Report to the Discovery Channel.

    Science.gov (United States)

    Kubey, Robert; Serafin, Gina Marcello

    The Assignment: Media Literacy curriculum is a 6-module media literacy curriculum developed by Renee Hobbs of Babson College and her staff in collaboration with the Discovery Channel. There are three versions of Assignment: Media Literacy, one for elementary school students, one for middle school students, and one for high school students. Close…

  13. Final remediation of the provisional storage near Zavratec. Separation of waste, decontamination and radiological measurements

    International Nuclear Information System (INIS)

    Stepisnik, M.; Zeleznik, N.; Mele, I.

    2000-01-01

    This paper presents remedial activities in Zavratec during winter 1999 - 2000. The difficult and slow process of separation radioactive from non-radioactive waste is explained, and the measuring techniques and equipment for separation are presented. The measurements of storage contamination and its decontamination, involving different practical problems, are described in detail. As a result, the initial volume of the waste was reduced to 50%, in spite of the extended decontamination works. The waste has been relocated to the Brinje storage facility. Measurements inside and outside the Zavratec facility after decontamination showed that no radioactivity higher than the natural background was present. The facility was released for unrestricted use. (author)

  14. Software package r3t. Model for transport and retention in porous media. Final report

    International Nuclear Information System (INIS)

    Fein, E.

    2004-01-01

    In long-termsafety analyses for final repositories for hazardous wastes in deep geological formations the impact to the biosphere due to potential release of hazardous materials is assessed for relevant scenarios. The model for migration of wastes from repositories to men is divided into three almost independent parts: the near field, the geosphere, and the biosphere. With the development of r 3 t the feasibility to model the pollutant transport through the geosphere for porous or equivalent porous media in large, three-dimensional, and complex regions is established. Furthermore one has at present the ability to consider all relevant retention and interaction effects which are important for long-term safety analyses. These are equilibrium sorption, kinetically controlled sorption, diffusion into immobile pore waters, and precipitation. The processes of complexing, colloidal transport and matrix diffusion may be considered at least approximately by skilful choice of parameters. Speciation is not part of the very recently developed computer code r 3 t. With r 3 t it is possible to assess the potential dilution and the barrier impact of the overburden close to reality

  15. Synergistic extraction of transition metal cations from aqueous media by two separated organic phases

    International Nuclear Information System (INIS)

    Goldberg, I.

    1991-12-01

    We have therefore initiated novel approaches to the study of the mechanism of the synergistic extraction of metal ions by means of two separated organic phases, which are brought in contact with the same aqueous phase. The present work is concerned with the extraction of transition metals and actinides ions from nitric acid by chelating agents e.g., HTTA thenoyltrifluoroacetone in a diluent - the first organic phase, and by natural donor, e.g., TBP, tri-butyl phosphate in a diluent the second organic phase. The adduct formation was studied by means of spectrochemical and radiochemical methods. In the first approach the aqueous phase was attacked with both organic phases simultanously (the static or parallel extraction). In this method organic phase are separated one from the other. It was shown that even in the absence of mixing, synergism is observed under this experimental conditions. The results indicate, that adduct formation occurs in both organic phases. Nevertheless the enhanchment of extraction in the TBP phase is by far greater than that in the HTTA containing phase. This approach has one disadvatage, viz., the experiments are very time consuming, a typical experiment requiring over 10 days. In order to overcome this difficulty, the following experiments were carried out: the aqueous phase were first shaken with diluent containing an anionic ligand and the phases were allowed to separate. Then the aqueous solution were shaken with diluent containing a netural donor and the phase again were allowed to separate. The concentration of the metal ions in all the phases were determined. The experiments were repeated with an other diluent replacing the first diluent in one or both organic phases. In this way eight sequences of experiments were carried out for each concentration set chosen. The results thus point out that this experimental approach open new possibilities to investigate the mechanism and the kinetics of synergistic extraction processes. (author) the

  16. Separation, fractionation, concentration and drying of food products: Final report, March 4, 1987--March 31, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.; Brewbaker, P.L.

    1988-03-01

    This project studied energy efficient processes for separation, fractionation, concentration, drying, and recombination of food products, in order to reduce energy requirements for processing, preservation, and transportation. The project had three phases. In the laboratory-scale phase, results of which are summarized in this report, tomato puree was separated by three methods: conventional vacuum filtration, centrifugation, and crossflow microfiltration to produce pulp and serum. Three methods of recombination were examined: homogenizing, stomacher blending, and static (in-line) mixing. Satisfactory recombined purees were obtained. In addition, after centrifugation, the pulp was rinsed producing rinsed-pulp, and the rinse water was added to the serum producing rinse/serum. The rinse/serum was concentrated by evaporation. This was recombined with the rinsed-pulp and water producing satisfactory puree. 11 refs., 18 figs., 18 tabs.

  17. Multiphase Transport in Porous Media: Gas-Liquid Separation Using Capillary Pressure Gradients International Space Station (ISS) Flight Experiment Development

    Science.gov (United States)

    Wheeler, Richard R., Jr.; Holtsnider, John T.; Dahl, Roger W.; Deeks, Dalton; Javanovic, Goran N.; Parker, James M.; Ehlert, Jim

    2013-01-01

    Advances in the understanding of multiphase flow characteristics under variable gravity conditions will ultimately lead to improved and as of yet unknown process designs for advanced space missions. Such novel processes will be of paramount importance to the success of future manned space exploration as we venture into our solar system and beyond. In addition, because of the ubiquitous nature and vital importance of biological and environmental processes involving airwater mixtures, knowledge gained about fundamental interactions and the governing properties of these mixtures will clearly benefit the quality of life here on our home planet. The techniques addressed in the current research involving multiphase transport in porous media and gas-liquid phase separation using capillary pressure gradients are also a logical candidate for a future International Space Station (ISS) flight experiment. Importantly, the novel and potentially very accurate Lattice-Boltzmann (LB) modeling of multiphase transport in porous media developed in this work offers significantly improved predictions of real world fluid physics phenomena, thereby promoting advanced process designs for both space and terrestrial applications.This 3-year research effort has culminated in the design and testing of a zero-g demonstration prototype. Both the hydrophilic (glass) and hydrophobic (Teflon) media Capillary Pressure Gradient (CPG) cartridges prepared during the second years work were evaluated. Results obtained from ground testing at 1-g were compared to those obtained at reduced gravities spanning Martian (13-g), Lunar (16-g) and zero-g. These comparisons clearly demonstrate the relative strength of the CPG phenomena and the efficacy of its application to meet NASAs unique gas-liquid separation (GLS) requirements in non-terrestrial environments.LB modeling software, developed concurrently with the zero-g test effort, was shown to accurately reproduce observed CPG driven gas-liquid separation

  18. Extraction and separation of zinc and cadmium chlorides by TOPO from mixed media

    International Nuclear Information System (INIS)

    Ben Mousa, S.; Altakrory, A.; Abdel Raouf, M.W.; Alian, A.

    1997-01-01

    The effect of water-miscible alcohols and acetone on the extraction and separation of Cd and Zn chlorides by TOPO was systematically investigated. The maximum extraction of Zn chloride with 0.1 M TOPO decreases in the order: acetone> methanol> ethanol> 2-propanol> 2-butanol. For alcohols, the sequence of decreasing extractability is thus parallel to the order of their dielectric constants. This can be explained by the increase of HCl extraction by TOPO in the same direction. The presence of additives in the polar phase prevents the formation of a bulky white precipitate encountered during extraction of Zn Cl 2 from pure aqueous solutions. A decrease of Cd chloride extraction was generally noticed in presence of additives; this is more noticeable for the longer chain alcohols. The highest separation factor (E) for Zn Cl 2 and Cd Cl 2 in 0.4 M HCl is obtained from 30% methanol (13.8 compared to about 3.8 in absence of methanol) and from 10-20% acetone where it reaches 30

  19. La presencia catalana en la Andalucía Occidental a finales de la Edad Media

    Directory of Open Access Journals (Sweden)

    Bello León, Juan Manuel

    2010-06-01

    Full Text Available Taking for granted that the Catalan-Aragonese expansion through the Mediterranean sea has received due attention from historians, this work deals with some realms and locations less often visited by sailors and merchants from Catalonia, Valencia or Mallorca. Its aim is to provide a view of the Catalan presence in western Andalusia throughout the late Middle Ages, analyzing its role in the Andalusian allotment and the conditions accounting for the development of such a presence in the region between the thirteenth and the fifteenth centuries. It deals particularly with the creation of family and economic bonds standing as the foundations of Catalan influence on Andalusia, which help to better understand its interest in the Middle Atlantic some time later.

    Tomada como punto de partida la idea de que la historiografía conoce bastante bien la expansión catalanoaragonesa por distintos puntos del Mediterráneo, este trabajo pretende acercarse a otros ámbitos menos frecuentados por marinos y comerciantes de aquel reino, aunque no por ello es menos importante para el desarrollo económico de Cataluña, Valencia o Mallorca. Así, el objetivo de este artículo es ofrecer una muestra de lo que fue la presencia catalana en la Andalucía Occidental a lo largo de los siglos finales de la Edad Media, analizando su participación en los repartimientos andaluces, las condiciones que afectaron al desarrollo de su presencia en la región entre los siglos XIII-XV, así como prestar una especial atención a la formación de los vínculos familiares y económicos que cimentaron su influencia en Andalucía y ayudan a explicar mejor su posterior interés por el Atlántico Medio.

  20. Redox speciation of final repository relevant elements using separation methods in combination with ICP mass spectrometry

    International Nuclear Information System (INIS)

    Graser, Carl-Heinrich

    2015-01-01

    The long-term safety assessment for nuclear waste repositories requires a detailed understanding of the chemistry of actinide elements in the geosphere. The development of advanced analytical tools is required to gain detailed insights into actinide redox speciation in a given system. The mobility of radionuclides is mostly determined by the geochemical conditions which control the redox state of radionuclides. Besides the longlived radionuclides plutonium (Pu) and neptunium (Np), which are key elements in high level nuclear waste, iron (Fe) represents a main component in natural systems controlling redox related geochemical processes. Analytical techniques for determining oxidation state distribution for redox sensitive radionuclides and other metal ions often have a lack of sensitivity. The detection limits of these methods (i.e. UV/vis, TRLFS, XANES) are in general in the range of ≥ 10 -6 mol.L -1 . As a consequence ultrasensitive new analytical techniques are required. Capillary electrophoresis (CE) and ion chromatography (IC) are powerful separation methods for metal ions. In the course of this thesis different speciation method for iron, neptunium and plutonium were optimized. With the optimized setup redox speciation analysis of these elements in different samples were done. Furthermore CE hyphenated to inductively coupled plasma sector field mass spectrometry (CE - ICP - SF - MS) was used to measure the redox speciation of Pu (III, IV, V, VI), Np (IV, V, VI) and Fe (II, III) at concentrations lower than 10 -7 mol.L -1 . CE coupling and separation parameters such as sample gas pressure, make up flow rate, capillary position, auxiliary gas flow, as well as the electrolyte system were optimized to obtain the maximum sensitivity. The methodes detection limits are 10 -12 mol.L -1 for Np and Pu. The various oxidation state species of Pu and Np in different samples were separated by application of an acetate based electrolyte system. The separation of Fe (II

  1. Propiedad, producción y paisaje agrarios en Pozuelo, a finales de la Edad Media .

    Directory of Open Access Journals (Sweden)

    Clemente Ramos, Julián

    2004-06-01

    Full Text Available The agrarian economy of Pozuelo, village of the tierra of Galisteo located in the base of the mountainous reliefs of the Central System, is characterized by the importance of other productions besides the cereal (wine and, in smaller measure, oil and figs. This smallest weight in the cereal explains the nonexistence of cultivation hojas that appear in other villages of the tierra. There is, however, a white and net separation of the open fields dedicated to the cereal and of the vineyards and orchards. The property of cereal lands and vineyards are distributed in a very different way. The first one presents a high concentration. Something more than 10% of the neighbors has exploitations of twenty or more fanegas; around 20% they possess exploitations stockings; in front of them, a third has insufficient exploitations and a fourth part doesn't possess cereal lands. However, the less suitable sectors control a majority and growing part of the vineyards. This circumstance allows us to think of a certain social balance.

    La economía agraria de Pozuelo, aldea de la tierra de Galisteo situada en la base de los relieves montañosos del Sistema Central, se caracteriza por la importancia de la producción no cerealícola (vino y, en menor medida, aceite e higos. Este menor peso del cereal explica la inexistencia de hojas de cultivo, que aparecen en otras aldeas de la tierra. Hay, sin embargo, una clara y neta separación de los campos abiertos cerealícolas y de las viñas y huertos. La propiedad cerealícola y vitícola se reparten de modo muy diferente. La primera presenta una elevada concentración. Algo más de un 10% de los vecinos disponen de explotaciones de veinte o más fanegas; en torno al 20% poseen explotaciones medias; frente a ellos, un tercio tiene explotaciones insuficientes y una cuarta parte no posee tierras de cereal. Sin embargo, los sectores menos acomodados controlan una parte mayoritaria y

  2. Bio-Oil Separation and Stabilization by Supercritical Fluid Fractionation. 2014 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Agblevor, Foster [Utah State Univ., Logan, UT (United States); Petkovic, Lucia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bennion, Edward [Utah State Univ., Logan, UT (United States); Quinn, Jason [Utah State Univ., Logan, UT (United States); Moses, John [CF Technologies, Hyde Park, MA (United States); Newby, Deborah [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ginosar, Daniel [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-03-01

    The objective of this project is to use supercritical fluids to separate and fractionate algal-based bio-oils into stable products that can be subsequently upgraded to produce drop-in renewable fuels. To accomplish this objective, algae was grown and thermochemically converted to bio-oils using hydrothermal liquefaction (HTL), pyrolysis, and catalytic pyrolysis. The bio-oils were separated into an extract and a raffinate using near-critical propane or carbon dioxide. The fractions were then subjected to thermal aging studies to determine if the extraction process had stabilized the products. It was found that the propane extract fraction was twice as stable as the parent catalytic pyrolysis bio-oils as measured by the change in viscosity after two weeks of accelerated aging at 80°C. Further, in-situ NMR aging studies found that the propane extract was chemically more stable than the parent bio-oil. Thus the milestone of stabilizing the product was met. A preliminary design of the extraction plant was prepared. The design was based on a depot scale plant processing 20,000,000 gallons per year of bio-oil. It was estimated that the capital costs for such a plant would be $8,700,000 with an operating cost of $3,500,000 per year. On a per gallon of product cost and a 10% annual rate of return, capital costs would represent $0.06 per gallon and operating costs would amount to $0.20 per gallon. Further, it was found that the energy required to run the process represented 6.2% of the energy available in the bio-oil, meeting the milestone of less than 20%. Life cycle analysis and greenhouse gas (GHG) emission analysis found that the energy for running the critical fluid separation process and the GHG emissions were minor compared to all the inputs to the overall well to pump system. For the well to pump system boundary, energetics in biofuel conversion are typically dominated by energy demands in the growth, dewater, and thermochemical process. Bio-oil stabilization by

  3. Calculations on isotope separation by laser induced photodissociation of polyatomic molecules. Final report

    International Nuclear Information System (INIS)

    Lamb, W.E. Jr.

    1978-11-01

    This report describes research on the theory of isotope separation produced by the illumination of polyatomic molecules by intense infrared laser radiation. Newton's equations of motion were integrated for the atoms of the SF 6 molecule including the laser field interaction. The first year's work has been largely dedicated to obtaining a suitable interatomic potential valid for arbitrary configurations of the seven particles. This potential gives the correct symmetry of the molecule, the equilibrium configuration, the frequencies of the six distinct normal modes of oscillation and the correct (or assumed) value of the total potential energy of the molecule. Other conditions can easily be imposed in order to obtain a more refined potential energy function, for example, by making allowance for anharmonicity data. A suitable expression was also obtained for the interaction energy between a laser field and the polyatomic molecule. The electromagnetic field is treated classically, and it would be easily possible to treat the cases of time dependent pulses, frequency modulation and noise

  4. [Atomic Vapor Laser Isotope Separation (AVLIS) program]. Final report, [January--July 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-04

    This report summarizes work performed for the Atomic Vapor Laser Isotope Separation (AVLIS) program from January through July, 1992. Each of the tasks assigned during this period is described, and results are presented. Section I details work on sensitivity matrices for the UDS relay telescope. These matrices show which combination of mirror motions may be performed in order to effect certain changes in beam parameters. In Section II, an analysis is given of transmission through a clipping aperture on the launch telescope deformable mirror. Observed large transmission losses could not be simulated in the analysis. An EXCEL spreadsheet program designed for in situ analysis of UDS optical systems is described in Section III. This spreadsheet permits analysis of changes in beam first-order characteristics due to changes in any optical system parameter, simple optimization to predict mirror motions needed to effect a combination of changes in beam parameters, and plotting of a variety of first-order data. Optical systems may be assembled directly from OSSD data. A CODE V nonsequential model of the UDS optical system is described in Section IV. This uses OSSD data to build the UDS model; mirror coordinates may thus be verified. Section V summarizes observations of relay telescope performance. Possible procedures which allow more accurate assessment of relay telescope performance are given.

  5. Investigation of the particle selectivity of a traveling potential wave; neon isotope separation with the Solitron process. Final report

    International Nuclear Information System (INIS)

    Lowder, R.S.

    1994-01-01

    The specific goal of this three year effort was to investigate this novel isotope separation process itself: to determine whether isotopes could indeed be separated and, if so, with what limitations--space charge effects, instabilities, and, in particular, with what throughput limitations. Termed the Solitron process, the concept is based on the strong isotopic variation in wave/ion interaction for a potential wave passing through an ion beam when the wave speed is near the ion speed. The ion's charge-to-mass ratio determines not only which ions are picked up by the wave but also the final energy of those ions that are picked up (accelerated to a higher energy); thus, this method can be used for isotope separation. Much progress was made regarding separation and throughput, concluding that separation works well in conjunction with electrostatic focusing used to obtain enough throughput (enough beam current) to make a practical device. The next step would likely be a production device, although development of an appropriate metal ion source would be useful. Funding is an issue; development cost estimates run around two million dollars for a market only several times that cost. Although there is much concern about the future supply of isotopes such as could be produced by the Solitron process, as well as costs, at present the supply from Oak Ridge and Russian sources is adequate for US needs. Should demand grow, these LDRD studies would strongly support proposals for further development of this Solitron process and help assure its likely success. For example, a point design for a magnesium mission was formulated to obtain a consistent set of design numbers that would optimize performance without pushing any constraints seen in these studies. A similar design could be formulated for other missions (magnesium was just a convenient target)

  6. Dynamics of Coupled Contaminant and Microbial Transport in Heterogeneous Porous Media: Purdue Component. Final report

    International Nuclear Information System (INIS)

    Cushman, J.H.

    2000-01-01

    Dynamic microbial attachment/detachment occurs in subsurface systems in response to changing environmental conditions caused by contaminant movement and degradation. Understanding the environmental conditions and mechanisms by which anaerobic bacteria partition between aqueous and solid phases is a critical requirement for designing and evaluating in situ bioremediation efforts. This interdisciplinary research project, of which we report only the Purdue contribution, provides fundamental information on the attachment/detachment dynamics of bacteria in heterogeneous porous media. Fundamental results from the Purdue collaboration are: (a) development of a matched-index method for obtaining 3-D Lagrangian trajectories of microbial sized particles transporting within porous media or microflow cells, (b) application of advanced numerical methods to optimally design a microflow cell for studying anaerobic bacterial attachment/detachment phenomena, (c) development of two types of models for simulating bacterial movement and attachment/detachment in microflow cells and natural porous media, (d) application of stochastic analysis to upscale pore scale microbial attachment/detachment models to natural heterogeneous porous media, and (e) evaluation of the role nonlocality plays in microbial dynamics in heterogeneous porous media

  7. TAILORING INORGANIC SORBENTS FOR SRS STRONTIUM AND ACTINIDE SEPARATIONS: MODIFIED MONOSODIUM TITANATE PHASE III FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Taylor-Pashow, K.; Hobbs, D.

    2010-09-01

    This document provides a final report of Phase III testing activities for the development of modified monosodium titanate (mMST), which exhibits improved strontium and actinide removal characteristics compared to the baseline MST material. The activities included characterization of the crystalline phases present at varying temperatures, solids settling characteristics, quantification of the peroxide content; evaluation of the post-synthesis gas release under different conditions; the extent of desorption of {sup 85}Sr, Np, and Pu under washing conditions; and the effects of age and radiation on the performance of the mMST. Key findings and conclusions include the following. The peroxide content of several mMST samples was determined using iodometric titration. The peroxide content was found to decrease with age or upon extended exposure to elevated temperature. A loss of peroxide was also measured after exposure of the material to an alkaline salt solution similar in composition to the simulated waste solution. To determine if the loss of peroxide with age affects the performance of the material, Sr and actinide removal tests were conducted with samples of varying age. The oldest sample (4 years and 8 months) did show lower Sr and Pu removal performance. When compared to the youngest sample tested (1 month), the oldest sample retained only 15% of the DF for Pu. Previous testing with this sample indicated no decrease in Pu removal performance up to an age of 30 months. No loss in Np removal performance was observed for any of the aged samples, and no uptake of uranium occurred at the typical sorbent loading of 0.2 g/L. Additional testing with a uranium only simulant and higher mMST loading (3.0 g/L) indicated a 10% increase of uranium uptake for a sample aged 3 years and 8 months when compared to the results of the same sample measured at an age of 1 year and 5 months. Performance testing with both baseline-MST and mMST that had been irradiated in a gamma source to

  8. The Effects of Otitis Media on Articulation. Final Report for 1982-1983.

    Science.gov (United States)

    Roberts, Joanne Erwick

    The study examined the relationship in 44 preschoolers (considered to have varying degrees of predicted risk for poor school performance) between otitis media (middle ear disease) during the first 3 years of life and speech production (articulation) during preschool and school age years. Speech production accuracy was assessed by the number of…

  9. The Effects of Otitis Media on Speech and Language. Final Report for 1983-1984.

    Science.gov (United States)

    Roberts, Joanne Erwick; Henderson, Frederick W.

    This study, part of a 4-year longitudinal project, examined the possible relationship between persistent otitis media (middle ear disease) in early childhood and speech and language functioning. Subjects were 38 black preschool children between 3 and 7 years of age who, although normal in intellectual and verbal functioning, were identified as at…

  10. Extraction and separation of U(VI and Th(IV from hydrobromic acid media using Cyanex-923 extractant

    Directory of Open Access Journals (Sweden)

    Ghag Snehal M.

    2010-01-01

    Full Text Available A systematic study of the solvent extraction of uranium(VI and thorium(IV from hydrobromic acid media was performed using the neutral phosphine oxide extractant Cyanex-923 in toluene. These metal ions were found to be quantitatively extracted with Cyanex-923 in toluene in the acidity range 5x10-5-1x10-4 M and 5x10-5-5x10-3 M, respectively, and they are stripped from the organic phase with 7.0 M HClO4 and 2.0- 4.0 M HCl, respectively. The effect of the equilibrium period, diluents, diverse ions and stripping agent on the extraction of U(VI and Th(IV was studied. The stoichiometry of the extracted species of these metal ions was determined based on the slope analysis method. The extraction reactions proceed by solvation and their probable extracted species found in the organic phase were UO2Br2•2Cyanex-923 and ThBr4•2Cyanex-923. Based on these results, a sequential procedure for their separation from each other was developed.

  11. Actinide-Lanthanide separation by an electrolytic method in molten salt media: feasibility assessment of a renewed liquid cathode

    International Nuclear Information System (INIS)

    Huguet, A.

    2009-12-01

    This study is part of a research program concerning the assessment of pyrochemical methods for the nuclear waste processing. The An-Ln partitioning could be achieved by an electrolytic selective extraction in molten salt media. It has been decided to focus on liquid reactive cathode which better suits to a group actinides co-recycling. The aim of the study is to propose, define and initiate the development of an electrolytic pyro-process dedicated to the quantitative and selective recovery of the actinides. Quantitativeness is related to technology, whereas selectivity is governed by chemistry. The first step consisted in selecting the adequate operating conditions, which enables a sufficient An-Ln separation. The first step consisted, by means of thermodynamic calculi and electrochemical investigations, in selecting a promising combination between molten electrolyte and cathodic material, regarding the process constraints. To improve the recovery yield, it is necessary to develop a disruptive technology: here comes the concept of a dynamic electrodeposition carried out onto liquid metallic drops. The next step consisted in designing and manufacturing a lab-scale device which enables dropping flow studies. Since interfacial phenomena are of primary meaning in such a concept, it has been decided to focus on high temperature liquid-liquid interfacial measurements. (author)

  12. Extraction behaviour of 2-octylaminopyridine towards lead(II) from succinate media and its separation from other toxic metals

    International Nuclear Information System (INIS)

    Mane, Chandrashekhar P.; Anuse, Mansing A.

    2008-01-01

    Liquid-liquid extraction of lead(II) from succinate media was carried out with 2-octylaminopyridine (2-OAP) in chloroform. Lead(II) was quantitatively extracted with 0.036 M 2-OAP in chloroform from 0.005-0.007 M sodium succinate when equilibrated for 5 min. Lead(II) from the organic phase was stripped with three 10 mL portions of 0.4 M acetic acid and determined titrimetrically with EDTA. The nature of extracted species was determined from the log-log plot. The optimum conditions have been evaluated based on a critical study of weak acid concentration, extractant concentration, period of equilibration and effect of diluents. The metal loading capacity of the reagent was found to be 8 mg of lead(II) with 10 mL 0.036 M of the extractant. The extraction of the lead(II) was carried out in presence of various ions to ascertain the tolerance limit of individual. Temperature dependence of the extraction equilibrium constants was examined to estimate the apparent thermodynamic functions (ΔH, ΔS and ΔG) for extraction reaction. Lead(II) was successfully separated from commonly associated metal ions such as Bi(III), Hg(II), Cr(VI), Cd(II), Zn(II), Al(III), Ca(II), Ba(II) and from binary and ternary mixtures. The method was extended for determination of lead(II) in real samples

  13. final register SOLID FERMENTED MATERIAL (BOKASHI) AS A BIOFERTILIZER FOR POTTING MEDIA USING EFFECTIVE MICROORGANISMS (EM)

    OpenAIRE

    Jenkins, Tim A.; Daly, Mike

    2005-01-01

    Adding a solid fermentation product (bokashi) to potting media enhanced the growth of vegetable seedlings when the microbial inoculant Effective Micororganisms (EM) was used. There was a negative response to the inclusion of bokashi made without EM. The benefit to seedling growth from EM bokashi also improved crop performance post-transplanting. Effect on seedlings was further enhanced by the inclusion of fishmeal and, to a lesser extent, by adding trace elements in the bokashi fermentation. ...

  14. Social networking and the Olympic Movement: social media analysis, opportunities and trends : final report

    OpenAIRE

    Fernández Peña, Emilio

    2011-01-01

    Table of contents : 1: Introduction. - 2 : Sociodemographic data of social networking sites. - 3 : The Vancouver 2010 Olympic Winter Games on Facebook, Twitter and Orkut. - 4 : Singapore 2010 Youth Olympic Games communication strategies on Facebook and Twitter. - 5 : Sport organizations social networking strategies : case study analysis. - 6 : Olympic athletes and social media use during a non olympic-period. - 7. The Olympic Games, NBA and FC Barcelona on Facebook : content and fan participa...

  15. Modelling extraction and separation of some alpha-transition elements from acidic media by synergic combinations of aromatic polyimines and micellar cationic exchangers

    International Nuclear Information System (INIS)

    Vitart, X.; Musikas, C.

    1988-01-01

    In this paper is emphasized, taking the extraction and separation by Dinonylnaphtalene sulfonic acid (HDMNS)of ruthenium-rhodium from a nitric acid media and nickel-cobalt from a sulfuric acid media as examples, the quantified chemical equilibria involved in order to elucidate the extraction mechanism. Reactions in aqueous media were investigated within three aspects: kinetics of formation, stability of metal complexes, ionic associations between complexes and mineral anions present in acidic media. This last point explains partly the selectivity of the system. The behaviour of HDNNS within extraction conditions, was studied leading to the structure of the micelle and to the quantification of equilibria involved (critical micelle concentration, polymerisation constant, etc...). Ligand extraction was studied previously to metal complexes extraction since the general mechanism of the system proceeds as a competitive extraction of cationic species in aqueous media (protonated forms of the free ligand, cationic metal complexes). The modelling of independent extraction of metals was used to predict numerically the behaviour of a multicomponent system where few metals are initially in aqueous media. These simulations are in accordance with experimental results

  16. Final Report: Vitrification of Inorganic Ion-Exchange Media, VSL-16R3710-1

    Energy Technology Data Exchange (ETDEWEB)

    Kot, Wing K. [The Catholic Univ. of America, Washington, DC (United States). Vitreous State Lab.; Pegg, Ian L. [The Catholic Univ. of America, Washington, DC (United States). Vitreous State Lab.; Brandys, Marek [The Catholic Univ. of America, Washington, DC (United States). Vitreous State Lab.; Penafiel, Miguel [The Catholic Univ. of America, Washington, DC (United States). Vitreous State Lab.

    2018-02-21

    One of the primary roles of waste pretreatment at the Hanford Tank Waste Treatment and Immobilization Plant (WTP) is to separate the majority of the radioactive components from the majority of the nonradioactive components in retrieved tank wastes, producing a high level waste (HLW) stream and a low activity waste (LAW) stream. This separation process is a key element in the overall strategy to reduce the volume of HLW that requires vitrification and subsequent disposal in a national deep geological repository for high level nuclear waste. After removal of the radioactive constituents, the LAW stream, which has a much larger volume but smaller fraction of radioactivity than the HLW stream, will be immobilized and disposed of in near surface facilities at the Hanford site.

  17. ‘I’d just lose it if there was any more stress in my life’: Separated Fathers, Fathers’ Rights and the News Media

    Directory of Open Access Journals (Sweden)

    Vivienne Elizabeth

    2016-06-01

    Full Text Available Custody abductions and filicides-suicides are not every day occurrences and typically become ‘media events’. Through an analysis of newspaper representations of two custody abductions and one filicide-suicide, this article examines the role played by fathers’ rights discourse in the construction of the separated father in each case. It argues that fathers’ rights discourse played a central role in the sympathetic portrayal of the two fathers involved in the custody abductions, but was less obviously present in the case of the filicide-suicide. These divergent representations indicate that news media representations are contingent on circumstances and also point to the limits of fathers’ rights discourses in legitimating and neutralising the actions of fathers in pain over the loss of intimate personal relationships. However, the use of a forensic approach to reporting meant that each case remained decontextualised from the pattern of violence and coercive control that typically characterises conflictual separations and custody disputes.

  18. Final Report - Montana State University - Microbial Activity and Precipitation at Solution-Solution Mixing Zones in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Gerlach, Robin [Montana State University

    2014-10-31

    impact on ancillary constituents (i.e., Sr) was determined. Model simulations accompanied the experimental efforts. Benefits and Outcomes of the Project. The research contributed towards defining the key physical, chemical, and biological processes influencing the form and mobility of DOE priority contaminants (e.g., 60Co, 90Sr, U) in the subsurface. The work conducted and reported herein, will in the future (i) contribute to controlling the juxtaposition of microbial activity, contaminants and amendments, (ii) promote new strategies for delivering amendments, and (iii) allow new approaches for modifying permeability and flow in porous media. We feel that the work has already translated directly to improving the efficiency of amendment based remediation strategies. Products. The results of the project have been published in a number of peer reviewed journal articles. The abstracts and citations to those articles, given in section 2.0 below, make up the bulk of this final report.

  19. Laser Texturing of Magnetic Recording Media Final Report CRADA No. TSV-1298-96

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marshall, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-16

    The Commercial Laser Systems Group at LLNL developed a concept for patterning of computer magnetic recording discs. Magnetic recording media require texturing over areas designated for contact in order to minimize friction with data transducing heads. In fabricating a hard disk, an aluminum nickel-phosphorous substrate was polished to a specular finish then a mechanical means was used to roughen an annular area intended to be the head contact band. In a previous patent (US Patent 5,062,021) it was proposed that the focused output of a low power laser with short pulse length could be used to generate the textured pattern. However, the patterned area typically required 75,000 textured spots that needed to be rapidly (less than 10 seconds) printed with good uniformity. A means to achieve the accurate placement and uniform profile, as well as a meaningfully rapid process time, was not discussed in the referenced patent. The LLNL team devised a system that could rapidly and inexpensively accomplish the texturing.

  20. FINAL INTERIM REPORT VERIFICATION SURVEY ACTIVITIES IN FINAL STATUS SURVEY UNITS 7, 8, 9, 10, 11, 13 and 14 AT THE SEPARATIONS PROCESS RESEARCH UNIT, NISKAYUNA, NEW YORK

    International Nuclear Information System (INIS)

    Jadick, M.G.

    2010-01-01

    The Separations Process Research Unit (SPRU) facilities were constructed in the late 1940s to research the chemical separation of plutonium and uranium. SPRU operated between February 1950 and October 1953. The research activities ceased following the successful development of the reduction/oxidation and plutonium/uranium extraction processes that were subsequently used by the Hanford and the Savannah River sites.

  1. Final summarizing report on Grant DE-SC0001014 "Separation of Highly Complex Mixtures by Two-dimension Liquid Chromatography"

    Energy Technology Data Exchange (ETDEWEB)

    Guiochon, Georges [Univ. of Tennessee, Knoxville, TN (United States)

    2013-09-16

    The goal of our research was a fundamental investigation of methods available for the coupling of two separate chromatographic separations that would considerably enhance the individual separation power of each of these two separations. This gain arises from the combination of two independent retention mechanisms, one of them separating the components that coelute on the other column, making possible the separation of many more compounds in a given time. The two separation mechanisms used must be very different. This is possible because many retention mechanisms are available, using different kinds of molecular interactions, hydrophobic or hydrophilic interactions, polar interactions, hydrogen bonding, complex formation, ionic interactions, steric exclusion. Two methods can be used, allowing separations to be performed in space (spreading the bands of sample components on a plate covered with stationary phase layer) or in time (eluting the sample components through a column and detecting the bands leaving the column). Both offer a wide variety of possible combinations and were studied.

  2. Shear waves in near surface 3D media-SH-wavefield separation, refraction time migration and tomography

    Science.gov (United States)

    Woelz, Susanne; Rabbel, Wolfgang; Mueller, Christof

    2009-05-01

    When investigating topographically irregular layers in the near surface with shear waves, it is of particular importance to consider the 3D-nature of wave propagation. Depending on the layer geometry and on the spatial arrangement of source- and receiver-points significant lateral ray bending can occur causing side-swipe traveltime effects and complicated polarisation patterns. As an example we present a study where 3D-shear wave refraction measurements were applied in order to reconstruct the geometry of a silted ancient harbour basin at the archaeological site of Miletus (West Turkey). Seismic signals were generated with a three-component vector force and recorded with three-component geophones arranged in 2D-arrays of 1 m grid spacing. Since a correct identification of refracted S-wave arrivals is a precondition to traveltime interpretation we investigated a method to decompose these wavefields with respect to their polarisation and azimuth of propagation. Taking advantage of the 2D-geophone arrangement we applied the following processing approach: In case of general lateral heterogeneity a decomposition can be performed by applying the curl and divergence operations to the vector wavefields recorded in 2D-arrays. The separated tangential and normal components to the wavefront in a plane are finally enhanced by combining the different force components in order to eliminate the radiation characteristics of the source. The decomposed wavefield was then the basis for 3D-refractor imaging through a newly formulated map migration of the refracted traveltime field. This technique was developed to map coherent basement structure on the meter-scale. Supplemental tomographic inversion using the refractor topography model as input provided a plausible velocity model, exhibiting characteristic anomalies such as a prominent low velocity zone overlain by a high velocity layer in the refractor. The seismic velocity structure suggests that the harbour basin was locally filled

  3. FY12 Final Report for PL10-Mod Separations-PD12: Electrochemically Modulated Separation of Plutonium from Dilute and Concentrated Dissolver Solutions for Analysis by Gamma Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, Sandra H.; Arrigo, Leah M.; Duckworth, Douglas C.; Cloutier, Janet M.; Breshears, Andrew T.; Schwantes, Jon M.

    2013-05-01

    Accurate and timely analysis of plutonium in spent nuclear fuel is critical in nuclear safeguards for detection of both protracted and rapid plutonium diversions. Gamma spectroscopy is a viable method for accurate and timely measurements of plutonium provided that the plutonium is well separated from the interfering fission and activation products present in spent nuclear fuel. Electrochemically modulated separation (EMS) is a method that has been used successfully to isolate picogram amounts of Pu from nitric acid matrices. With EMS, Pu adsorption may be turned “on” and “off” depending on the applied voltage, allowing for collection and stripping of Pu without the addition of chemical reagents. In this work, we have scaled up the EMS process to isolate microgram quantities of Pu from matrices encountered in spent nuclear fuel during reprocessing. Several challenges have been addressed including surface area limitations, radiolysis effects, electrochemical cell performance stability, and chemical interferences. After these challenges were resolved, 6 µg Pu was deposited in the electrochemical cell with approximately an 800-fold reduction of fission and activation product levels from a spent nuclear fuel sample. Modeling showed that these levels of Pu collection and interference reduction may not be sufficient for Pu detection by gamma spectroscopy. The main remaining challenges are to achieve a more complete Pu isolation and to deposit larger quantities of Pu for successful gamma analysis of Pu. If gamma analyses of Pu are successful, EMS will allow for accurate and timely on-site analysis for enhanced Pu safeguards.

  4. Separation of DR synthesized Ti-Mg Alloy by dissolution of waste by-products in acid media

    CSIR Research Space (South Africa)

    Mushove, T

    2010-06-01

    Full Text Available The objective of this work is to isolate synthesized Ti-Mg alloy powder through leaching out of MgO and any unreduced oxides of Titanium. Leaching media investigated are H2SO4, HCl and organic acids ascorbic acid/oxalic and L-cysteine /ascorbic...

  5. Ionic liquids as recyclable and separable reaction media in Rh-catalyzed decarbonylation of aromatic and aliphatic aldehydes

    DEFF Research Database (Denmark)

    Malcho, Phillip; Garcia-Suarez, Eduardo J.; Riisager, Anders

    2014-01-01

    Ionic liquids (ILs) have been applied as recyclable reaction media in the decarbonylation of aldehydes in the presence of a rhodium-phosphine complex catalyst. The performance of several new catalytic systems based on imidazolium-based ILs and [Rh(dppp)2]Cl (dppp: 1,3-diphenylphosphinopropane) were...

  6. The plasma centrifuge: A compact, low cost, stable isotope separator. Phase 2 final technical report, September 15, 1991 - September 14, 1995

    International Nuclear Information System (INIS)

    Guss, W.

    1996-01-01

    Enriched stable isotopes are required for production of radionuclides as well as for research and diagnostic uses. Science Research Laboratory (SRL) has developed a plasma centrifuge for moderate throughput of enriched stable isotopes, such as 13 C, 17 O, 18 O, and 203 Tl, for medical as well as other applications. Dwindling isotope stocks have restricted the use of enriched isotopes and their associated labeled organic molecules in medical imaging to very few research facilities because of high costs of isotope separation. With the introduction of the plasma centrifuge separator, the cost per separated gram of even rarely occurring isotopes (≤ 1% natural abundance) is potentially many times lower than with other separation technologies (cryogenic distillation and calutrons). The centrifuge is a simple, robust, pulsed electrical discharge device that has successfully demonstrated isotope separation of small (mg) quantities of 26 Mg. Based on the results of the Phase 2 program, modest enhancements to the power supplies and cooling systems, a centrifuge separator will have high repetition rate (60 pps) and high duty cycle (60%) to produce in one month kilogram quantities of highly enriched stable isotopes. The centrifuge may be used in stand-alone operation or could be used as a high-throughput pre-separation stage with calutrons providing the final separation

  7. 76 FR 56797 - United States v. Cumulus Media Inc., et al.; Proposed Final Judgment and Competitive Impact...

    Science.gov (United States)

    2011-09-14

    ... advertising preferable to advertising on other media platforms. Reasons for this include the fact that radio advertising time may be more cost-efficient and effective than other media at reaching the advertiser's target... as effectively using other media. 12. Local and national advertising that is placed on radio stations...

  8. Software package r{sup 3}t. Model for transport and retention in porous media. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fein, E. (ed.)

    2004-07-01

    In long-termsafety analyses for final repositories for hazardous wastes in deep geological formations the impact to the biosphere due to potential release of hazardous materials is assessed for relevant scenarios. The model for migration of wastes from repositories to men is divided into three almost independent parts: the near field, the geosphere, and the biosphere. With the development of r{sup 3}t the feasibility to model the pollutant transport through the geosphere for porous or equivalent porous media in large, three-dimensional, and complex regions is established. Furthermore one has at present the ability to consider all relevant retention and interaction effects which are important for long-term safety analyses. These are equilibrium sorption, kinetically controlled sorption, diffusion into immobile pore waters, and precipitation. The processes of complexing, colloidal transport and matrix diffusion may be considered at least approximately by skilful choice of parameters. Speciation is not part of the very recently developed computer code r{sup 3}t. With r{sup 3}t it is possible to assess the potential dilution and the barrier impact of the overburden close to reality.

  9. El diezmo y las catedrales en España e Inglaterra hacia finales de la Edad Media

    Directory of Open Access Journals (Sweden)

    Hernández Borreguero, José Julián

    2013-12-01

    Full Text Available This article is a comparative study of tithe collection in Spain and England at the end of the middle ages, based on the archives of the Cathedral Chapter of Seville and Durham Priory. A number of similarities are observable in the two systems but there are also important differences, especially concerning the recipients of tithe: in the English case, tithes were owed to the parish priest, but in the Spanish they were shared by the Crown, the bishop and the cathedral chapter (as manager of the tithe.El artículo realiza un estudio comparado entre los sistemas de recaudación del diezmo español e inglés a finales de la Edad Media, tomando como referencia la administración del Cabildo Catedral de Sevilla y del monasterio de la Catedral de Durham. Los dos sistemas ofrecen algunas similitudes y también importantes diferencias, condicionadas, sobre todo, por los beneficiarios del diezmo: en el diezmo inglés el beneficio era para el párroco, y en el diezmo español participaban también la Corona, el obispo y el cabildo catedralicio (como gestor del impuesto.

  10. Heat and mass transfer in porous media phase separation at temperatures below the lambda-point of He-4

    Science.gov (United States)

    Yuan, S. W. K.; Frederking, T. H. K.

    1986-01-01

    Newtonian fluid motion, coupled to heat transfer via latent heat of phase transition, is well known from numerous studies of condensation and boiling. Considerably less knowledge is available for vapor-liquid phase separation in the absence of gravity effect on the transport phenomena. The present studies are focused on heat and mass transfer associated with vapor-liquid phase separation required for long-term storage of the cryogen liquid He II in space vessels. Though space conditions are the dominant mode of interest in advanced equipment, e.g. IR telescopes, the systems may be operated in principle during terrestrial conditions. The latter are considered in the present work. It emphasizes the linear regime including an extrapolation based on variable thermophysical properties. Data taken with a phase separation approach show departures from the linear regime prediction. They agree with a transport equation proposed for the nonlinear, turbulent regime.

  11. Separation of DR synthesized Ti-Mg Alloy by dissolution of waste by-products in acid media

    CSIR Research Space (South Africa)

    Mushove, T

    2010-06-01

    Full Text Available Of DR Synthesized Ti-Mg Alloy By Dissolution Of Waste By-Products In Acid Media. The dissolution experiments were done in a Julabo SW23 waterbath shaker, with 300 ml flasks. Acid solution of predetermined molarity was charged into a flask and heated... of the diffraction peaks of Mg and TiO2. The reduction of TiO2 at 32hrs of milling was evaluated from Equation 6.2 to be 90.4% (4). Calculated proportions of products, and the respective masses from a 2g sample, are shown in Table 1. Constituent TiO2 Ti-Mg Mg...

  12. High capacity Venturi scrubber to separate aerosol-borne radioactivity from an air-gas-steam mixture. Final report

    International Nuclear Information System (INIS)

    Mayinger, F.; Glueckert, U.

    1993-01-01

    All German LWR are equipped with devices which in the case of a hypothetic accident permit a filtered depressurization of the containment precluding failure of the latter and minimizing the release of radioactive materials into the environment. To filter the aerosol charged air-steam mixture from the containment also a venturi scrubber is used. It has the great advantage that it can remove safely and over a certain period of time, even without active cooling systems, the after-heat released from the separated radioactive materials. Those separated radioactive materials are trapped in a scrubbing liquid which, in the event of a temporary failure of all active cooling systems, may partly evaporate and thus remove the heat in a completely passive way. The venturi scrubbers conceived earlier by the reactor manufacturer are of a very simple design and not optimized to achieve highest separation degrees. Therefore development work was started to optimize the separation behaviour of the venturi scrubber precisely with regard to submicron aerosols which are to be expected after a core meltdown accident. To achieve this, a special concept of scrubbing liquid addition developed by the contractor, the so-called multistage concept, was applied adapting it to the specific requirements. (orig./HP) [de

  13. Adsorption/Membrane Filtration as a Contaminant Concentration and Separation Process for Mixed Wastes and Tank Wastes - Final Report

    International Nuclear Information System (INIS)

    Benjamin, M.M.

    1999-01-01

    This project was conducted to evaluate novel approaches for removing radioactive strontium (Sr) and cesium (Cs) from the tank wastes. The bulk of the Sr removal research conducted as part of this project investigated adsorption of Sr onto a novel adsorbent known as iron-oxide-coated sand. The second major focus of the work was on the removal of cesium. Since the chemistries of strontium and cesium have little commonality, different materials (namely, cesium scavengers known as hexacyanoferrates, HCFs) were employed in these tests. This study bridged several scientific areas and yielded valuable knowledge for implementing new technological processes. The applicability of the results extends beyond the highly specialized application niches investigated experimentally to other issues of potential interest for EMSP programs (e.g., separation of chromium from a variety of wastes using IOCS, separation of Cs from neutral and acidic wastes with EC-controlled HCFs)

  14. Judeus de Castela em Portugal no final da Idade Media: onomástica familiar e mobilidade

    Directory of Open Access Journals (Sweden)

    Ferro Tavares, María José

    2014-06-01

    Full Text Available Using mainly unpublished sources of the royal chancery and Inquisition proceedings the author provides profiles of individuals and their families among a Jewish minority of Spanish origin in Portugal from the restoration of the Avis dynasty (1383 to the forced baptism and the expulsions and forced baptism of the Jews. The first part identifies Spanish-Jewish last names found in the sources as the last names of many Jews could indicate their geographic origin or that of their immediate ancestors. Special attention is given to a selection of these families (Navarro, Menir, Abravanel. In the second part, it is exemplified the mobility of the Jewish immigrants as a consequence of the social and political instability.Judíos de Castilla en Portugal a finales de la Edad Media: onomástica familiar y movilidad Mediante el recurso a documentación en buena medida inédita de la cancillería real y procesos inquisitoriales, la autora realiza una lectura diacrónica de la presencia y establecimiento de judíos de origen hispánico en Portugal desde la instauración de la Casa de Avís y hasta después del bautismo forzado de 1497. La primera parte del estudio está dedicada al análisis de la onomástica hispano-judía, partiendo de la premisa de que el sobrenombre de algunos judíos puede indicar su naturalidad u origen toponímico (o el de sus antepasados inmediatos, con especial detenimiento en las familias Navarro, Menir (desmiente la tradicional identificación entre ambos linajes y Abravanel. En la segunda parte se exponen ejemplos de la movilidad de los judíos llegados al reino como consecuencia de la inestabilidad social y las políticas regias.

  15. Boundaries of the Realizability Region of Membrane Separation Processes

    Science.gov (United States)

    Tsirlin, A. M.; Akhrenemkov, A. A.

    2018-01-01

    The region of realizability of membrane separation systems having a constant total membrane area has been determined for a definite output of a final product at a definite composition of a mixture flow. The law of change in the pressure in the mixture, corresponding to the minimum energy required for its separation, was concretized for media close in properties to ideal gases and solutions.

  16. Final Report for Fractionation and Separation of Polydisperse Nanoparticles into Distinct Monodisperse Fractions Using CO2 Expanded Liquids

    Energy Technology Data Exchange (ETDEWEB)

    Chistopher Roberts

    2007-08-31

    The overall objective of this project was to facilitate efficient fractionation and separation of polydisperse metal nanoparticle populations into distinct monodisperse fractions using the tunable solvent properties of gas expanded liquids. Specifically, the dispersibility of ligand-stabilized nanoparticles in an organic solution was controlled by altering the ligand-solvent interaction (solvation) by the addition of carbon dioxide (CO{sub 2}) gas as an antisolvent (thereby tailoring the bulk solvent strength) in a custom high pressure apparatus developed in our lab. This was accomplished by adjusting the CO{sub 2} pressure over the liquid dispersion, resulting in a simple means of tuning the nanoparticle precipitation by size. Overall, this work utilized the highly tunable solvent properties of organic/CO{sub 2} solvent mixtures to selectively size-separate dispersions of polydisperse nanoparticles (ranging from 1 to 20 nm in size) into monodisperse fractions ({+-}1nm). Specifically, three primary tasks were performed to meet the overall objective. Task 1 involved the investigation of the effects of various operating parameters (such as temperature, pressure, ligand length and ligand type) on the efficiency of separation and fractionation of Ag nanoparticles. In addition, a thermodynamic interaction energy model was developed to predict the dispersibility of different sized nanoparticles in the gas expanded liquids at various conditions. Task 2 involved the extension of the experimental procedures identified in task 1 to the separation of other metal particles used in catalysis such as Au as well as other materials such as semiconductor particles (e.g. CdSe). Task 3 involved using the optimal conditions identified in tasks 1 and 2 to scale up the process to handle sample sizes of greater than 1 g. An experimental system was designed to allow nanoparticles of increasingly smaller sizes to be precipitated sequentially in a vertical series of high pressure vessels by

  17. Role of nanoparticles in phase separation and final morphology of superhydrophobic polypropylene/zinc oxide nanocomposite surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hejazi, Iman [Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Hajalizadeh, Bardia [Department of Chemical Engineering, Islamic Azad University, Shahrood Branch, P.O. Box 36155-163, Shahrood (Iran, Islamic Republic of); Seyfi, Javad, E-mail: Jseyfi@gmail.com [Department of Chemical Engineering, Islamic Azad University, Shahrood Branch, P.O. Box 36155-163, Shahrood (Iran, Islamic Republic of); Sadeghi, Gity Mir Mohamad [Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Jafari, Seyed-Hassan [School of Chemical Engineering, University of Tehran, P.O. Box 11155-4563, Tehran (Iran, Islamic Republic of); Khonakdar, Hossein Ali [Iran Polymer and Petrochemical Institute, P.O. Box 14965/115, Tehran (Iran, Islamic Republic of)

    2014-02-28

    In this work, phase separation process was revisited to study the effect of nanoparticles in acceleration of phase separation and formation of hierarchical structures. Superhydrophobic surfaces were prepared using polypropylene (PP) and the corresponding nanocomposites containing zinc oxide (ZnO) nanoparticles through a typical solution casting method. The wettability and morphological behavior of the surfaces were investigated via water contact angle (WCA) measurements and scanning electron microscopy (SEM), respectively. It was found that upon introduction of ZnO nanoparticles into the pure PP, the obtained surfaces have become superhydrophobic with WCAs above 150° and sliding angles below 10°. Calcination of ZnO nanoparticles was exploited to explicate the unexpected significant loss in superhydrophobicity of the sample loaded with high ZnO content. Crystallization behavior of the samples were also investigated via differential scanning calorimetry and correlated to superhydrophobicity of the surfaces. X-ray photoelectron and Fourier transform infrared spectroscopies were also utilized to further characterize the samples. An attempt was also made to present a more clear mechanism for formation of hierarchical structures which are responsible for superhydrophobicity. Likewise, the so far proposed mechanisms for formation of micro/nano roughness on the superhydrophobic surfaces were reviewed as well.

  18. Improving the Quality of Mixed Recycled Coarse Aggregates from Construction and Demolition Waste Using Heavy Media Separation with Fe3O4 Suspension

    Directory of Open Access Journals (Sweden)

    Heonchan Kang

    2017-01-01

    Full Text Available The primary objectives of this study are to investigate the feasibility of a heavy media separation process with magnetite (Fe3O4 suspension for upgrading the quality of mixed recycled coarse aggregates from construction and demolition waste (CDW in Korea and to determine a range of effective operating density of Fe3O4 suspension for producing high-quality RCA acceptable to structural concrete applications. For the purposes, six 200 kg recycled coarse aggregates (RCAs samples were collected from a conventional recycling plant in Korea. Subsequently, the samples were processed by a heavy media separation process using Fe3O4 suspensions with various densities from 2.65 g/cm3 to 2.40 g/cm3 with an interval of 0.05 g/cm3. Next, a series of tests was performed in the laboratory to evaluate properties of finished sink and float products from the HMS processes, including oven-dry density, absorption capacity, and physical durability. Furthermore, compressive strength of concrete cylinders (150 mm by 300 mm made of the finished sink products from Fe3O4 suspensions with three different densities (2.4, 2.5, and 2.6 g/cm3 was tested in this study. As a result, it was demonstrated that the HMS process using Fe3O4 suspension with a density ranging between 2.40 and 2.65 g/cm3 was effective for upgrading mixed CDW RCAs in Korea to high-quality RCAs acceptable for structural concrete applications.

  19. The non-Newtonian heat and mass transport of He 2 in porous media used for vapor-liquid phase separation. Ph.D. Thesis

    Science.gov (United States)

    Yuan, S. W. K.

    1985-01-01

    This investigation of vapor-liquid phase separation (VLPS) of He 2 is related to long-term storage of cryogenic liquid. The VLPS system utilizes porous plugs in order to generate thermomechanical (thermo-osmotic) force which in turn prevents liquid from flowing out of the cryo-vessel (e.g., Infrared Astronomical Satellite). An apparatus was built and VLPS data were collected for a 2 and a 10 micrometer sintered stainless steel plug and a 5 to 15 micrometer sintered bronze plug. The VLPS data obtained at high temperature were in the nonlinear turbulent regime. At low temperature, the Stokes regime was approached. A turbulent flow model was developed, which provides a phenomenological description of the VLPS data. According to the model, most of the phase separation data are in the turbulent regime. The model is based on concepts of the Gorter-Mellink transport involving the mutual friction known from the zero net mass flow (ZNMF) studies. The latter had to be modified to obtain agreement with the present experimental VLPS evidence. In contrast to the well-known ZNMF mode, the VLPS results require a geometry dependent constant (Gorter-Mellink constant). A theoretical interpretation of the phenomenological equation for the VLPS data obtained, is based on modelling of the dynamics of quantized vortices proposed by Vinen. In extending Vinen's model to the VLPS transport of He 2 in porous media, a correlation between the K*(GM) and K(p) was obtained which permits an interpretation of the present findings. As K(p) is crucial, various methods were introduced to measure the permeability of the porous media at low temperatures. Good agreement was found between the room temperature and the low temperature K(p)-value of the plugs.

  20. Life Cycle Assessment of different uses of biogas from anaerobic digestion of separately collected biodegradable waste in France. Final report

    International Nuclear Information System (INIS)

    2007-01-01

    In the first part of the study, Gaz de France (GdF) and the French Environment Energy Management Agency (ADEME) wished to identify the best method to use the biogas from anaerobic digestion of separately collected biodegradable waste (bio-waste). Secondly, GdF and ADEME wished to evaluate the strength and weaknesses of the two main different organic recycling: anaerobic digestion (methanization) and composting. The study is based on the life cycle assessment method. The life cycle assessment used for this study consists in quantifying the environmental impacts of all of the activities which are related to the chosen use method. This methodology involves compiling a detailed account of all substances and energy flows removed or emitted from or into the environment at each stage of the life cycle. These flows are then translated into indicators of potential environment impacts. This methodology is based on the international standards ISO14040 and ISO 14044. The life cycle assessment was performed by RDC Environnement. In this study, two questions were treated: - Which is the best valorisation method for biogas produced from the anaerobic digestion of separately collected biodegradable waste: fuel, heat or electricity? ('Biogas' question); - Which is the best treatment for the separately collected biodegradable waste: anaerobic digestion (methanization) or industrial composting? ('Composting' question). The field of the study includes the arrival of the separately collected biodegradable waste at the anaerobic unit as well as the utilisation of the biogas energy and the agricultural use of the digestate from anaerobic digestion. For each biogas utilisation, the environmental impacts of each life cycle stage were considered as well as the impacts that were avoided due to the substitution of the use of non-renewable energy ('conventional' procedures). The modelling of the direct composting of the biodegradable waste was realised taking into account the followings

  1. Separation of actinides and fission products from middle-active wastes by precipate flotation. Final report. Pt. 2

    International Nuclear Information System (INIS)

    Heckmann, K.; Strnad, J.; Rieger, W.; Rieger, C.

    1988-11-01

    1. Fluorine substituted 'Kalignost' derivatives are selective to Cesium and can be used as precipitation and/or extraction agents. 2. Plutonium(IV) can be separated from nitric acid solutions by recipitation with Alkylpyridinium salts. The concentration of Plutonium in the filtrate decreases under optimal conditions to 2x10 -7 mole/l. The method is selective, the precipitation agents stable in nitric acid and under high radioactive exposition. The theory of precipitation of hexanitrato complexes of metals in the fourth oxidation state is also presented. 3. An electroflotation apparatus has been constructed. It allows to adjust in one single step the appropriate oxidation states of the metals and the flotation of the metal-surfactant precipitates. (orig.) With 9 refs., 5 tabs., 11 figs [de

  2. Organic photochemical reactions on solid surfaces: Enrichment and separation of isotopes. Final report. SBIR-1988, Phase 2

    International Nuclear Information System (INIS)

    Ruderman, W.; Fehlner, J.; Spencer, J.

    1988-01-01

    The objectives of the Phase II program were to: (1) investigate organic photochemical reactions on solid porous silica surfaces, (2) utilize the magnetic isotope effect to develop a (13)C enrichment process using a fluidized bed reactor, and (3) investigate the possibility of enrichment of heavier isotopes having a nuclear spin. Although researchers were able to demonstrate a continuous fluidized bed (13)C enrichment process, analysis showed that the process could not compete with low temperature distillation of CO because of the high cost of the starting material, dibenzylketone (DBK), and the difficulty of converting the photochemical decomposition products back to DBK. However, the process shows promise for the separation of heavier isotopes such as (29)Si. The photochemical studies led to the discovery that the selectivity for terminal chlorination of alkanes can be increased more than 25 fold by sorbing the alkanes on ZSM-5 zeolites in a fluidized bed. The selectivity is ascribed to the presence of interfaces within the crystals

  3. Photodecomposition of iodinated contrast media and subsequent formation of toxic iodinated moieties during final disinfection with chlorinated oxidants.

    Science.gov (United States)

    Allard, Sébastien; Criquet, Justine; Prunier, Anaïs; Falantin, Cécilia; Le Person, Annaïg; Yat-Man Tang, Janet; Croué, Jean-Philippe

    2016-10-15

    Large amount of iodinated contrast media (ICM) are found in natural waters (up to μg.L(-)(1) levels) due to their worldwide use in medical imaging and their poor removal by conventional wastewater treatment. Synthetic water samples containing different ICM and natural organic matter (NOM) extracts were subjected to UV254 irradiation followed by the addition of chlorine (HOCl) or chloramine (NH2Cl) to simulate final disinfection. In this study, two new quantum yields were determined for diatrizoic acid (0.071 mol.Einstein(-1)) and iotalamic acid (0.038 mol.Einstein(-1)) while values for iopromide (IOP) (0.039 mol.Einstein(-1)), iopamidol (0.034 mol.Einstein(-1)) and iohexol (0.041 mol.Einstein(-1)) were consistent with published data. The photodegradation of IOP led to an increasing release of iodide with increasing UV doses. Iodide is oxidized to hypoiodous acid (HOI) either by HOCl or NH2Cl. In presence of NOM, the addition of oxidant increased the formation of iodinated disinfection by-products (I-DBPs). On one hand, when the concentration of HOCl was increased, the formation of I-DBPs decreased since HOI was converted to iodate. On the other hand, when NH2Cl was used the formation of I-DBPs was constant for all concentration since HOI reacted only with NOM to form I-DBPs. Increasing the NOM concentration has two effects, it decreased the photodegradation of IOP by screening effect but it increased the number of reactive sites available for reaction with HOI. For experiments carried out with HOCl, increasing the NOM concentration led to a lower formation of I-DBPs since less IOP are photodegraded and iodate are formed. For NH2Cl the lower photodegradation of IOP is compensated by the higher amount of NOM reactive sites, therefore, I-DBPs concentrations were constant for all NOM concentrations. 7 different NOM extracts were tested and almost no differences in IOP degradation and I-DBPs formation was observed. Similar behaviour was observed for the 5 ICM

  4. Engineered Osmosis for Energy Efficient Separations: Optimizing Waste Heat Utilization FINAL SCIENTIFIC REPORT DOE F 241.3

    Energy Technology Data Exchange (ETDEWEB)

    NATHAN HANCOCK

    2013-01-13

    chosen process stimulation software was required to improve the reliability of process simulations for engineering design support. Data from experiments was also employed to calculate critical mass transfer and system design parameters (such as the height equivalent to a theoretical plate (HETP)) to aid in process design. When measured in a less than optimal design state for the stripping of NH{sub 3} and CO{sub 2} from a simulated dilute draw solution the HETP for one type of commercial stripper packing material was 1.88 ft/stage. During this study it was observed that the heat duty required to vaporize the draw solution solutes is substantially affected by the amount of water boilup also produced to achieve a low NH{sub 3} stripper bottoms concentration specification. Additionally, fluid loading of the stripper packing media is a critical performance parameter that affects all facets of optimum stripper column performance. Condensation of the draw solution tops vapor requires additional process considerations if being conducted in sub-atmospheric conditions and low temperature. Future work will focus on the commercialization of the Oasys EO technology platform for numerous applications in water and wastewater treatment as well as harvesting low enthalpy energy with our proprietary osmotic heat engine. Engineering design related to thermal integration of Oasys EO technology for both low and hig-grade heat applications is underway. Novel thermal recovery processes are also being investigated in addition to the conventional approaches described in this report. Oasys Water plans to deploy commercial scale systems into the energy and zero liquid discharge markets in 2013. Additional process refinement will lead to integration of low enthalpy renewable heat sources for municipal desalination applications.

  5. Final Report for Award #DE-SC3956 Separating Algorithm and Implementation via programming Model Injection (SAIMI)

    Energy Technology Data Exchange (ETDEWEB)

    Strout, Michelle [Colorado State Univ., Fort Collins, CO (United States)

    2015-08-15

    Programming parallel machines is fraught with difficulties: the obfuscation of algorithms due to implementation details such as communication and synchronization, the need for transparency between language constructs and performance, the difficulty of performing program analysis to enable automatic parallelization techniques, and the existence of important "dusty deck" codes. The SAIMI project developed abstractions that enable the orthogonal specification of algorithms and implementation details within the context of existing DOE applications. The main idea is to enable the injection of small programming models such as expressions involving transcendental functions, polyhedral iteration spaces with sparse constraints, and task graphs into full programs through the use of pragmas. These smaller, more restricted programming models enable orthogonal specification of many implementation details such as how to map the computation on to parallel processors, how to schedule the computation, and how to allocation storage for the computation. At the same time, these small programming models enable the expression of the most computationally intense and communication heavy portions in many scientific simulations. The ability to orthogonally manipulate the implementation for such computations will significantly ease performance programming efforts and expose transformation possibilities and parameter to automated approaches such as autotuning. At Colorado State University, the SAIMI project was supported through DOE grant DE-SC3956 from April 2010 through August 2015. The SAIMI project has contributed a number of important results to programming abstractions that enable the orthogonal specification of implementation details in scientific codes. This final report summarizes the research that was funded by the SAIMI project.

  6. Improving titer while maintaining quality of final formulated drug substance via optimization of CHO cell culture conditions in low-iron chemically defined media.

    Science.gov (United States)

    Xu, Jianlin; Rehmann, Matthew S; Xu, Xuankuo; Huang, Chao; Tian, Jun; Qian, Nan-Xin; Li, Zheng Jian

    2018-04-01

    During biopharmaceutical process development, it is important to improve titer to reduce drug manufacturing costs and to deliver comparable quality attributes of therapeutic proteins, which helps to ensure patient safety and efficacy. We previously reported that relative high-iron concentrations in media increased titer, but caused unacceptable coloration of a fusion protein during early-phase process development. Ultimately, the fusion protein with acceptable color was manufactured using low-iron media, but the titer decreased significantly in the low-iron process. Here, long-term passaging in low-iron media is shown to significantly improve titer while maintaining acceptable coloration during late-phase process development. However, the long-term passaging also caused a change in the protein charge variant profile by significantly increasing basic variants. Thus, we systematically studied the effect of media components, seed culture conditions, and downstream processing on productivity and quality attributes. We found that removing β-glycerol phosphate (BGP) from basal media reduced basic variants without affecting titer. Our goals for late-phase process development, improving titer and matching quality attributes to the early-phase process, were thus achieved by prolonging seed culture age and removing BGP. This process was also successfully scaled up in 500-L bioreactors. In addition, we demonstrated that higher concentrations of reactive oxygen species were present in the high-iron Chinese hamster ovary cell cultures compared to that in the low-iron cultures, suggesting a possible mechanism for the drug substance coloration caused by high-iron media. Finally, hypotheses for the mechanisms of titer improvement by both high-iron and long-term culture are discussed.

  7. DOE Final Report -NON-LINEAR WAVES IN CONTINUOUS MEDIA- BES- Division of Engineering and Materials Science

    International Nuclear Information System (INIS)

    Seth J. Putterman

    2006-01-01

    FINAL REPORT ON : NON-LINEAR WAVES IN CONTINUOUS MEDIA Doe DE FG03-87ER13686 (001312-001) Submitted January 10, 2006 by Seth J. Putterman 310-8252269 Physics Department University of California Los Angeles, CA 90095 puherman at ritva.physics.ucla.edu NON-LINEAR WAVES IN CONTINUOUS MEDIA I am happy to report that this project has been a big success. For over 10 years the DOE [Division of Materials Sciences and Engineering] has funded our research program on the overarching theme of spontaneous energy focusing phenomena. These effects occur when a nonlinear macroscopic system is excited so as to drive it far from equilibrium. The subsequent relaxation to equilibrium does not occur smoothly but instead is accompanied by the formation of structured domains where the energy density is highly concentrated. A signature example is picosecond sonoluminescence [1] wherein a smooth sound wave has its energy density focused by 12 orders of magnitude to generate a clock-like string of picosecond flashes of ultraviolet light. Our earlier work on solitons [2] demonstrated how uniform surface waves break up into stable localized structures. Our experimental work on turbulence produced photos of localized structures lying many standard deviations outside the range of gaussian statistics[3]. This effect is referred to as intermittency. Our recent work on friction finds its motivation in those theories of sonoluminescence which invoke frictional electricity. In its most common form this is the generation of a spark when we touch a doorknob after walking over a carpet. Our reading of the literature on this subject indicated that frictional electricity like sonoluminescence is not understood. So to probe triboelectrification we set up a modern version of an experiment performed by Bernoulli in 1700. Here sparking is caused by the rubbing of glass against mercury. We indeed observed flashes of light which were accompanied by events of stick-slip friction at the interface between the

  8. Continued Benefit to Rectal Separation for Prostate Radiation Therapy: Final Results of a Phase III Trial

    Energy Technology Data Exchange (ETDEWEB)

    Hamstra, Daniel A., E-mail: Daniel.Hamstra@gmail.com [Texas Oncology, Texas Center for Proton Therapy, Irving, Texas (United States); Mariados, Neil [Associated Medical Professionals of NY, PLLC, Syracuse, New York (United States); Sylvester, John [21st Century Oncology, Inc, Lakewood Ranch, East Bradenton, Florida (United States); Shah, Dhiren [Western New York Urology Associates, LLC, Doing Business as Cancer Care of WNY, Cheektowaga, New York (United States); Karsh, Lawrence [The Urology Center of Colorado, Denver, Colorado (United States); Hudes, Richard [Chesapeake Urology Associates, Doing Business as Chesapeake Urology Research Associates (The Prostate Center), Owings Mills, Maryland (United States); Beyer, David [Arizona Oncology Services Foundation, Phoenix, Arizona (United States); Kurtzman, Steven [Urological Surgeons of Northern California Inc, Campbell, California (United States); Bogart, Jeffrey [The Research Foundation of State University of New York/State University of New York Upstate Medical University, Syracuse, New York (United States); Hsi, R. Alex [Peninsula Cancer Center, Poulsbo, Washington (United States); Kos, Michael [Urology Nevada, Reno, Nevada (United States); Ellis, Rodney [University Hospitals Case Medical Center, Cleveland, Ohio (United States); Logsdon, Mark [Sutter Health Sacramento Sierra Region, Doing Business as Sutter Institute for Medical Research, Sacramento, California (United States); Zimberg, Shawn [Advanced Radiation Centers of New York, Lake Success, New York (United States); Forsythe, Kevin [Oregon Urology Institute, Springfield, Oregon (United States); Zhang, Hong [University of Rochester, Rochester, New York (United States); Soffen, Edward [CentraState Medical Center, Freehold, New Jersey (United States); Francke, Patrick [Carolina Regional Cancer Center, LLC, 21st Century Oncology, Inc, Myrtle Beach, South Carolina (United States); Mantz, Constantine [21st Century Oncology, Inc, Fort Meyers, Florida (United States); and others

    2017-04-01

    Purpose: SpaceOAR, a Food and Drug Administration–approved hydrogel intended to create a rectal–prostate space, was evaluated in a single-blind phase III trial of image guided intensity modulated radiation therapy. A total of 222 men were randomized 2:1 to the spacer or control group and received 79.2 Gy in 1.8-Gy fractions to the prostate with or without the seminal vesicles. The present study reports the final results with a median follow-up period of 3 years. Methods and Materials: Cumulative (Common Terminology Criteria for Adverse Events, version 4.0) toxicity was evaluated using the log-rank test. Quality of life (QOL) was examined using the Expanded Prostate Cancer Index Composite (EPIC), and the mean changes from baseline in the EPIC domains were tested using repeated measures models. The proportions of men with minimally important differences (MIDs) in each domain were tested using repeated measures logistic models with prespecified thresholds. Results: The 3-year incidence of grade ≥1 (9.2% vs 2.0%; P=.028) and grade ≥2 (5.7% vs 0%; P=.012) rectal toxicity favored the spacer arm. Grade ≥1 urinary incontinence was also lower in the spacer arm (15% vs 4%; P=.046), with no difference in grade ≥2 urinary toxicity (7% vs 7%; P=0.7). From 6 months onward, bowel QOL consistently favored the spacer group (P=.002), with the difference at 3 years (5.8 points; P<.05) meeting the threshold for a MID. The control group had a 3.9-point greater decline in urinary QOL compared with the spacer group at 3 years (P<.05), but the difference did not meet the MID threshold. At 3 years, more men in the control group than in the spacer group had experienced a MID decline in bowel QOL (41% vs 14%; P=.002) and urinary QOL (30% vs 17%; P=.04). Furthermore, the control group were also more likely to have experienced large declines (twice the MID) in bowel QOL (21% vs 5%; P=.02) and urinary QOL (23% vs 8%; P=.02). Conclusions: The benefit of a hydrogel spacer in

  9. Continued Benefit to Rectal Separation for Prostate Radiation Therapy: Final Results of a Phase III Trial

    International Nuclear Information System (INIS)

    Hamstra, Daniel A.; Mariados, Neil; Sylvester, John; Shah, Dhiren; Karsh, Lawrence; Hudes, Richard; Beyer, David; Kurtzman, Steven; Bogart, Jeffrey; Hsi, R. Alex; Kos, Michael; Ellis, Rodney; Logsdon, Mark; Zimberg, Shawn; Forsythe, Kevin; Zhang, Hong; Soffen, Edward; Francke, Patrick; Mantz, Constantine

    2017-01-01

    Purpose: SpaceOAR, a Food and Drug Administration–approved hydrogel intended to create a rectal–prostate space, was evaluated in a single-blind phase III trial of image guided intensity modulated radiation therapy. A total of 222 men were randomized 2:1 to the spacer or control group and received 79.2 Gy in 1.8-Gy fractions to the prostate with or without the seminal vesicles. The present study reports the final results with a median follow-up period of 3 years. Methods and Materials: Cumulative (Common Terminology Criteria for Adverse Events, version 4.0) toxicity was evaluated using the log-rank test. Quality of life (QOL) was examined using the Expanded Prostate Cancer Index Composite (EPIC), and the mean changes from baseline in the EPIC domains were tested using repeated measures models. The proportions of men with minimally important differences (MIDs) in each domain were tested using repeated measures logistic models with prespecified thresholds. Results: The 3-year incidence of grade ≥1 (9.2% vs 2.0%; P=.028) and grade ≥2 (5.7% vs 0%; P=.012) rectal toxicity favored the spacer arm. Grade ≥1 urinary incontinence was also lower in the spacer arm (15% vs 4%; P=.046), with no difference in grade ≥2 urinary toxicity (7% vs 7%; P=0.7). From 6 months onward, bowel QOL consistently favored the spacer group (P=.002), with the difference at 3 years (5.8 points; P<.05) meeting the threshold for a MID. The control group had a 3.9-point greater decline in urinary QOL compared with the spacer group at 3 years (P<.05), but the difference did not meet the MID threshold. At 3 years, more men in the control group than in the spacer group had experienced a MID decline in bowel QOL (41% vs 14%; P=.002) and urinary QOL (30% vs 17%; P=.04). Furthermore, the control group were also more likely to have experienced large declines (twice the MID) in bowel QOL (21% vs 5%; P=.02) and urinary QOL (23% vs 8%; P=.02). Conclusions: The benefit of a hydrogel spacer in

  10. Steel grinding media in production use

    International Nuclear Information System (INIS)

    Nass, D.E.

    1975-01-01

    This paper reviews the types of steel being used for grinding rods and balls by the mining industry in U. S. and Canada. Results of a Dec. 1973 grinding media survey of U. S. and Canadian mills are summarized. Common alloying elements (C, Mn, Cr, Mo, Cu, etc.) are discussed. Grinding balls and rods are discussed separately; wear tests using irradiated balls are described. Finally, defects in grinding media are discussed

  11. Extraction of zirconium(IV) and separation of 95Zr-95Nb from acidic thiocyanate media by LIX 54 and its mixtures with TBP

    International Nuclear Information System (INIS)

    Mishra, P.K.; Chakravortty, V.; Dash, K.C.; Das, N.R.; Bhattacharyya, S.N.

    1990-01-01

    Appreciable extraction of 95 Zr- 95 Nb by LIX 54 from aqueous HCl alone is not observed in the concentration range from 0.1 to 2 M HCl. Presence of thiocyanate ions results in appreciable extraction of this pair from such acid medium. Synergism has been observed in the extraction of zirconium(IV) by mixtures of LIX 54 and TBP from thiocyanate media, whereas there has been no appreciable synergism in case of niobium(V) under identical conditions. Slope analyses indicate the species extracted by pure TBP to be disolvate whereas for extraction by the mixtures of LIX 54 and TBP it is found to be monosolvate with respect to TBP. The extraction of both the metal ions have been found to depend on the concentration of acid as well as that of thiocyanate ions. Extraction increases with increase in percentage of either of the extractants. Effective separation of these congeneric pairs has been achieved by suitable choice of above system. Extraction is independent of aq. zirconium concentration up to 0.01 M above which it decreases. (orig.)

  12. Derecho, muerte y matrimonio: la familia matrimonial en el Mediterráneo cristiano, desde la Antigüedad al final de la Edad Media

    OpenAIRE

    Vial Dumas, Manuel

    2012-01-01

    La tesis analiza la evolución de las estructuras familiares en el ámbito del Mediterráneo cristiano desde la Antigüedad hasta el final de la Edad Media. La primera parte se centra en el paso de una familia de estructura extensa centrada en la muerte del padre como generadora de esferas jurídico-patrimoniales (es decir, de familias), a una familia nuclear centrada en el matrimonio como hecho generador de dichas esferas. Dicho cambio se produce, sobre todo, en la Antigüedad tardía. Para la espe...

  13. Mass transfer modeling on the separation of tantalum and niobium from dilute hydrofluoric media through a hollow fiber supported liquid membrane

    International Nuclear Information System (INIS)

    Buachuang, Duenphen; Ramakul, Prakorn; Leepipatpiboon, Natchanun; Pancharoen, Ura

    2011-01-01

    Highlights: → Simultaneous separation of tantalum and niobium from the mixture solution. → An extraction through a hollow fiber supported liquid membrane (HFSLM). → The effect on tantalum removal found from Aliquat 336. → The mathematical model focusing on the extraction side of the liquid membrane system was presented. → The mass transfer coefficients of the aqueous feed (k i ) and the organic membrane phase (k m ) for the system were estimated as 1.19 x 10 -5 and 1.39 x 10 -7 cm/s, respectively. → Experimental data and theoretical values were found to be in good agreement when the concentration of Aliquat336 in the membrane phase was below 4% (v/v). - Abstract: The separation of a mixture of tantalum and niobium in dilute hydrofluoric media via hollow fiber supported liquid membrane (HFSLM) was examined. Quaternary ammonium salt (Aliquat336) diluted in kerosene was used as a carrier. The various effects on the transport and separation of tantalum and niobium were studied: concentration of hydrofluoric acid in the feed solution, concentration of the carrier (Aliquat336) in the membrane phase, types of stripping solutions (NaClO 4 , thiourea and HCl) and their concentration. The extraction of tantalum in the membrane phase from 0.3 M hydrofluoric acid (HF) by 3% (v/v) Aliquat336 was achieved by leaving niobium in the feed solution. Quantitative recovery of tantalum was achieved by 0.2 M NaClO 4 . Furthermore, a mathematical model focusing on the extraction side of the liquid membrane system was presented in order to predict the concentration of tantalum at different times. The mass transfer coefficients of the aqueous feed (k i ) and the organic membrane phase (k m ) were estimated as 1.19 x 10 -5 and 1.39 x 10 -7 cm/s, respectively. Therefore, the mass transfer limiting step is the diffusion of tantalum-Aliquat336 through the liquid membrane. Moreover, mass transfer modeling was performed and the validity of the developed model evaluated. Experimental

  14. Mass transfer modeling on the separation of tantalum and niobium from dilute hydrofluoric media through a hollow fiber supported liquid membrane

    Energy Technology Data Exchange (ETDEWEB)

    Buachuang, Duenphen [Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330 (Thailand); Ramakul, Prakorn [Department of Chemical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom 73000 (Thailand); Leepipatpiboon, Natchanun [Chromatography and Separation Research Unit, Department of Chemistry, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand); Pancharoen, Ura, E-mail: ura.p.@chula.ac.th [Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330 (Thailand)

    2011-09-29

    Highlights: > Simultaneous separation of tantalum and niobium from the mixture solution. > An extraction through a hollow fiber supported liquid membrane (HFSLM). > The effect on tantalum removal found from Aliquat 336. > The mathematical model focusing on the extraction side of the liquid membrane system was presented. > The mass transfer coefficients of the aqueous feed (k{sub i}) and the organic membrane phase (k{sub m}) for the system were estimated as 1.19 x 10{sup -5} and 1.39 x 10{sup -7} cm/s, respectively. > Experimental data and theoretical values were found to be in good agreement when the concentration of Aliquat336 in the membrane phase was below 4% (v/v). - Abstract: The separation of a mixture of tantalum and niobium in dilute hydrofluoric media via hollow fiber supported liquid membrane (HFSLM) was examined. Quaternary ammonium salt (Aliquat336) diluted in kerosene was used as a carrier. The various effects on the transport and separation of tantalum and niobium were studied: concentration of hydrofluoric acid in the feed solution, concentration of the carrier (Aliquat336) in the membrane phase, types of stripping solutions (NaClO{sub 4}, thiourea and HCl) and their concentration. The extraction of tantalum in the membrane phase from 0.3 M hydrofluoric acid (HF) by 3% (v/v) Aliquat336 was achieved by leaving niobium in the feed solution. Quantitative recovery of tantalum was achieved by 0.2 M NaClO{sub 4}. Furthermore, a mathematical model focusing on the extraction side of the liquid membrane system was presented in order to predict the concentration of tantalum at different times. The mass transfer coefficients of the aqueous feed (k{sub i}) and the organic membrane phase (k{sub m}) were estimated as 1.19 x 10{sup -5} and 1.39 x 10{sup -7} cm/s, respectively. Therefore, the mass transfer limiting step is the diffusion of tantalum-Aliquat336 through the liquid membrane. Moreover, mass transfer modeling was performed and the validity of the

  15. Science literacy programs for K-12 teachers, public officials, news media and the public. Final report, 1994--1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    On 12 July 94, The Institute for Science and Society received the above titled grant for $300,000 with an additional $323,000 awarded 14 August 95. The Institute completed the programs provided by the Department of Energy grant on 28 February 97. These programs for teachers, public officials, news media and the public will continue through 31 December 97 with funding from other sources. The Institute is a non-profit 501-c-3 corporation. It was organized {open_quotes}... to help increase science literacy in all segments of the population and contribute to a more rational atmosphere than now exists for the public consideration of societal issues involving science and technology, both regional and national.{close_quotes} Institute personnel include the Honorable Mike McCormack, Director; Joan Harris, Associate Director; Kim Freier, Ed.D, Program Manager; and Sharon Hunt, Executive Secretary.

  16. Speciation analysis of arsenic, chromium and selenium in aquatic media. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2007-03-01

    The initiation of the Coordinated Research Project (CRP) on Development and Validation of Speciation Analysis using Nuclear Techniques resulted from the recognition that knowledge of total element concentration does not provide adequate information to understand the effects of trace and heavy metals observed in the environment and in living systems. Their toxicity, bioavailability, physiological and metabolic processes, mobility and distribution are greatly dependent on the specific chemical form of the element. Speciation analysis has yet to be developed to its full potential for biochemical, clinical and environmental investigations and still more work is needed in the near future. Seven participants from seven countries participated in this CRP covering a range of analytical techniques including GC, HPLC, AAS, and ICP-MS. The first Research Coordination Meeting (RCM) of the Coordinated Research Project on the Development and Validation of Speciation Analysis using Nuclear Techniques was held at the Reactor Centre of the Jozef Stefan Institute, Podgorica (near Ljubljana), Slovenia, 20-23 June 2001. The second RCM was held at the Technical University of Vienna, 18-22 November 2002, where, in addition to the participants, two external researchers could present their views and experience in the field. The last RCM was held in Vienna, 26-29 April 2004, and this publication is a summary of the results achieved and presented at this last RCM. The participants have developed several new procedures for the reliable analysis of As, Cr, and Se species, mainly in aquatic media. A new instrument was designed and several recommendations for speciation analysis were issued. It is hoped that this publication will make a contribution to enhancing the awareness of the importance of speciation analysis and add to the reliability of speciation results in Member State laboratories

  17. Rapid instrumental and separation methods for monitoring radionuclides in food and environmental samples. Final report on an IAEA co-ordinated research programme

    International Nuclear Information System (INIS)

    1995-01-01

    The Co-ordinated Research Programme (CRP) on Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples was established by the Agency following a Consultants' Meeting on the same topic, which was held 5-9 September 1988 in Vienna. It was completed in 1992. At various times during its course it encompassed 15 participants from 14 countries. The scope of work and objectives of the CRP were established at the Consultants' Meeting. It was agreed that the CRP should focus on the development of rapid methods for the determination of radionuclides in food and environmental samples during the intermediate and late post-accident phases. The rapid methods developed during the course of the CRP were intended to permit a timely and accurate determination of radionuclides at concentrations at least one order of magnitude below those specified for Derived Intervention Levels (DILs) for food by the WHO/FAO and the IAEA. Research Co-ordination meetings were held in Warsaw, Poland in September 1989 and in Vienna, Austria in 1991. Reports of the meetings are available from the Agency on Request. This document comprises copies of final reports from the participants and selected contributions presented by the participants at the meetings. The contributions were selected on the basis of being able to stand alone, without further explanation. Where there was an overlap in the information presented by a participant at both meetings, the most complete contribution was selected

  18. Rapid instrumental and separation methods for monitoring radionuclides in food and environmental samples. Final report on an IAEA co-ordinated research programme

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Co-ordinated Research Programme (CRP) on Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples was established by the Agency following a Consultants' Meeting on the same topic, which was held 5-9 September 1988 in Vienna. It was completed in 1992. At various times during its course it encompassed 15 participants from 14 countries. The scope of work and objectives of the CRP were established at the Consultants' Meeting. It was agreed that the CRP should focus on the development of rapid methods for the determination of radionuclides in food and environmental samples during the intermediate and late post-accident phases. The rapid methods developed during the course of the CRP were intended to permit a timely and accurate determination of radionuclides at concentrations at least one order of magnitude below those specified for Derived Intervention Levels (DILs) for food by the WHO/FAO and the IAEA. Research Co-ordination meetings were held in Warsaw, Poland in September 1989 and in Vienna, Austria in 1991. Reports of the meetings are available from the Agency on Request. This document comprises copies of final reports from the participants and selected contributions presented by the participants at the meetings. The contributions were selected on the basis of being able to stand alone, without further explanation. Where there was an overlap in the information presented by a participant at both meetings, the most complete contribution was selected.

  19. Final Report - Elucidating Bioreductive Transformations within Physically Complex Media: Impact on the Fate and Transport of Uranium and Chromium

    International Nuclear Information System (INIS)

    Benner, Shawn G.; Fendorf, Scott

    2009-01-01

    In situ stabilization (inclusive of natural attenuation) of toxic metals and radionuclides is an attractive approach for remediating many contaminated DOE sites. By immobilizing toxic metals and radionuclides in place, the removal of contaminated water to the surface for treatment as well as the associated disposal costs are avoided. To enhance in situ remediaton, microbiological reductive stabilization of contaminant metals has been, and continues to be, actively explored. It is likely that surface and subsurface microbial activity can alter the redox state of toxic metals and radionuclides, either directly or indirectly, so they are rendered immobile. Furthermore, anaerobic bacterial metabolic products will help to buffer pulses of oxidation, typically from fluxes of nitrate or molecular oxygen, and thus may stabilize reduced contaminants from oxidative mobilization. Uranium and chromium are two elements of particular concern within the DOE complex that, owing to their abundance and toxicity, appear well suited for biologically mediated reductive stabilization. Subsurface microbial activity can alter the redox state of toxic metals and radionuclides, rending them immobile. Imparting an important criterion on the probability that contaminants will undergo reductive stabilization, however, is the chemical and physical heterogeneity of the media. Our research first examined microbially induced transformation of iron (hydr)oxide minerals and their impact on contaminant attenuation. We revealed that in intricate cascade of geochemical reactions is induced by microbially produced Fe(II), and that during transformation contaminants such as U(VI) can be incorporated into the structure, and a set of Fe(II) bearing solids capable of reducing Cr(VI) and stabilizing resulting Cr(III). We also note, however, that common subsurface constituents such as phosphate can modify iron oxide transformation pathways and thus impact contaminant sequestration - 'affecting both Cr and U

  20. Flow in porous media, phase behavior and ultralow interfacial tensions: mechanisms of enhanced petroleum recovery. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Davis, H.T.; Scriven, L.E.

    1982-01-01

    A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The 1982 outputs of the interdisciplinary team of investigators were again ideas, instruments, techniques, data, understanding and skilled people: forty-one scientific and engineering papers in leading journals; four pioneering Ph.D. theses; numerous presentations to scientific and technical meetings, and to industrial, governmental and university laboratories; vigorous program of research visits to and from Minnesota; and two outstanding Ph.D.'s to research positions in the petroleum industry, one to a university faculty position, one to research leadership in a governmental institute. This report summarizes the 1982 papers and theses and features sixteen major accomplishments of the program during that year. Abstracts of all forty-five publications in the permanent literature are appended. Further details of information transfer and personnel exchange with industrial, governmental and university laboratories appear in 1982 Quarterly Reports available from the Department of Energy and are not reproduced here. The Minnesota program continues in 1983, notwithstanding earlier uncertainty about the DOE funding which finally materialized and is the bulk of support. Supplemental grants-in-aid from nine companies in the petroleum industry are important, as are the limited University and departmental contributions. 839 references, 172 figures, 29 tables.

  1. Final report on CCQM-K27.2: Second Subsequent study: determination of ethanol in aqueous media

    Science.gov (United States)

    Schantz, Michele M.; Parris, Reenie M.; May, Willie E.; Rosso, Adriana; Puglisi, Celia; Marques Rodrigues Caixeiro, Janaína; Massiff, Gabriela; Camacho Frías, Evangelina; Pérez Urquiza, Melina; Archer, Marcellé; Visser, M. S.; deVos, Betty-Jayne

    2013-01-01

    subsequent study (nominal concentrations of 0.2 mg/g, 1 mg/g, 3 mg/g and 60 mg/g). The three participants in the CCQM-K27-Subsequent key comparison demonstrated their ability to measure ethanol in aqueous matrix in the concentration range of 0.2 mg/g to 60 mg/g. A report on this project has been approved by the CCQM and can be found at the BIPM website. A second follow-on key comparison, CCQM-K27.2 Second Subsequent, was initiated in 2006 to accommodate laboratories that had not been ready to benchmark their methods in the previous two CCQM-K27 studies. Two levels of ethanol in water were used in the second subsequent study ranging in concentration between 0.5 mg/g and 4 mg/g. Four of the five participants in the CCQM-K27.2 Second Subsequent key comparison demonstrated their ability to measure ethanol in aqueous matrix in that concentration range. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  2. Research directed at developing a classical theory to describe isotope separation of polyatomic molecules illuminated by intense infrared radiation. Final report, May 7-September 30, 1979

    International Nuclear Information System (INIS)

    Lamb, W.E. Jr.

    1981-12-01

    This final report describes research on the theory of isotope separation produced by the illumination of polyatomic molecules by intense infrared laser radiation. This process is investigated by treating the molecule, sulfur hexafluoride, as a system of seven classical particles that obey the Newtonian equations of motion. A minicomputer is used to integrate these differential equations. The particles are acted on by interatomic forces, and by the time-dependent electric field of the laser. We have a very satisfactory expression for the interaction of the laser and the molecule which is compatible with infrared absorption and spectroscopic data. The interatomic potential is capable of improvement, and progress on this problem is still being made. We have made several computer runs of the dynamical behavior of the molecule using a reasonably good model for the interatomic force law. For the laser parameters chosen, we find that typically the molecule passes quickly through the resonance region into the quasi-continuum and even well into the real continuum before dissociation actually occurs. When viewed on a display terminal, the motions are exceedingly complex. As an aid to the visualization of the process, we have made a number of 16 mm movies depicting a three-dimensional representation of the motion of the seven particles. These show even more clearly the enormous complexity of the motions, and make clear the desirability of finding ways of characterizing the motion in simple ways without giving all of the numerical detail. One of the ways to do this is to introduce statistical parameters such as a temperature associated with the distribution of kinetic energies of the single particle. We have made such an analysis of our data runs, and have found favorable indications that such methods will prove useful in keeping track of the dynamical histories

  3. Separation of lanthanides through hydroxyapatite

    International Nuclear Information System (INIS)

    Garcia M, F.G.

    2006-01-01

    With the objective of obtaining from an independent way to each one of the lanthanides 151 Pm, 161 Tb, 166 Ho and 177 Lu free of carrier and with high specific activities starting from the indirect irradiation via, it intends in this work to determine the viability of separation of the couples Nd/Pm, Dy/Ho, Gd/Tb and Yb/Lu, by means of ion exchange column chromatography, using hydroxyapatite (HAp) and fluorite like absorbent material in complexing media. It is important to mention that have registered separation studies among lanthanides of the heavy group with those of the slight group, using the same mass and, in comparison with this work, quantities different from the father were used and of the son, also, that the separation studies were carried out among neighboring lanthanides. In this investigation, it was determined the effect that its have the complexing media: KSCN, sodium tartrate, sodium citrate, EDTA and aluminon, their pH and concentration, in the adsorption of the lanthanides in both minerals, in order to determine the chromatographic conditions for separation of the couples Nd/Pm, Dy/Ho, Gd/Tb and Yb/Lu. The work consists of five chapters, in the first one they are presented a theoretical introduction of the characteristics more important of the lanthanides, the hydroxyapatite and the fluorite; in the second, it is deepened in the ion exchange, as well as the two techniques (XRD and High Vacuum Electron Microscopy) to make the characterization of LnCI 3 (Ln = Nd, Gd, Dy or Yb) synthesized. The third chapter, it describes the methodology continued in our experimental work; in the room, its are presented the obtained results of the static and dynamic method to determine the viability of separation of neighboring lanthanides; and finally, the five chapter shows the conclusions. In this study, it is concludes that the separation among neighboring lanthanides cannot be carried out in the minerals and used media; because practically these lanthanides

  4. Pd-catalyzed ethylene methoxycarbonylation with Brønsted acid ionic liquids as promoter and phase-separable reaction media

    DEFF Research Database (Denmark)

    Garcia-Suarez, Eduardo J.; Khokarale, Santosh Govind; Nguyen van Buu, Olivier

    2014-01-01

    Brønsted acid ionic liquids (BAILs) were prepared and applied as combined acid promoters and reaction media in Pd–phosphine catalyzed methoxycarbonylation of ethylene to produce methyl propionate. The BAILs served as alternatives to common mineral acids required for the reaction, e.g. methanesulf......Brønsted acid ionic liquids (BAILs) were prepared and applied as combined acid promoters and reaction media in Pd–phosphine catalyzed methoxycarbonylation of ethylene to produce methyl propionate. The BAILs served as alternatives to common mineral acids required for the reaction, e...

  5. Electromagnetism on anisotropic fractal media

    Science.gov (United States)

    Ostoja-Starzewski, Martin

    2013-04-01

    Basic equations of electromagnetic fields in anisotropic fractal media are obtained using a dimensional regularization approach. First, a formulation based on product measures is shown to satisfy the four basic identities of the vector calculus. This allows a generalization of the Green-Gauss and Stokes theorems as well as the charge conservation equation on anisotropic fractals. Then, pursuing the conceptual approach, we derive the Faraday and Ampère laws for such fractal media, which, along with two auxiliary null-divergence conditions, effectively give the modified Maxwell equations. Proceeding on a separate track, we employ a variational principle for electromagnetic fields, appropriately adapted to fractal media, so as to independently derive the same forms of these two laws. It is next found that the parabolic (for a conducting medium) and the hyperbolic (for a dielectric medium) equations involve modified gradient operators, while the Poynting vector has the same form as in the non-fractal case. Finally, Maxwell's electromagnetic stress tensor is reformulated for fractal systems. In all the cases, the derived equations for fractal media depend explicitly on fractal dimensions in three different directions and reduce to conventional forms for continuous media with Euclidean geometries upon setting these each of dimensions equal to unity.

  6. CHRISGAS Project. WP13: Ancillary and Novel Processes. Final Report: Separation of Hydrogen with Membranes Combined with Water Gas Shift Reaction

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Hervas, J. M.; Marono, M.; Barreiro, M. M.

    2011-05-13

    Oxygen pressurized gasification of biomass out stands as a very promising approach to obtain energy or hydrogen from renewable sources. The technical feasibility of this technology has been investigated under the scope of the VI FP CHRISGAS project, which started in September 2004 and had a duration of five and a half years. The Division of Combustion and Gasification of CIEMAT participated in this project in Work Package 13: Ancillary and novel processes, studying innovative gas separation and gas upgrading systems. Such systems include novel or available high temperature water gas shift catalysts and commercially available membranes not yet tried in this type of atmosphere. This report describes the activities carried out during the project regarding the performance of high temperature water gas shift catalysts for upgrading of synthesis gas obtained from biomass gasification, the separation of H2 with selective membranes and the combination of both processes in one by means of a catalytic membrane reactor. (Author) 20 refs.

  7. CHRISGAS Project. WP13: Ancillary and Novel Processes. Final Report: Separation of Hydrogen with Membranes Combined with Water Gas Shift Reaction

    International Nuclear Information System (INIS)

    Sanchez-Hervas, J. M.; Marono, M.; Barreiro, M. M.

    2011-01-01

    Oxygen pressurized gasification of biomass out stands as a very promising approach to obtain energy or hydrogen from renewable sources. The technical feasibility of this technology has been investigated under the scope of the VI FP CHRISGAS project, which started in September 2004 and had a duration of five and a half years. The Division of Combustion and Gasification of CIEMAT participated in this project in Work Package 13: Ancillary and novel processes, studying innovative gas separation and gas upgrading systems. Such systems include novel or available high temperature water gas shift catalysts and commercially available membranes not yet tried in this type of atmosphere. This report describes the activities carried out during the project regarding the performance of high temperature water gas shift catalysts for upgrading of synthesis gas obtained from biomass gasification, the separation of H2 with selective membranes and the combination of both processes in one by means of a catalytic membrane reactor. (Author) 20 refs.

  8. Joint stabilization of sewage sludge and separated manure fluid. Treatment and utilization of manure. Final report; Gemeinsame Stabilisierung von Klaerschlamm und separierter Guellefluessigkeit. Guellebehandlung und -verwertung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, W.F.; Kolisch, G.

    1994-12-01

    As an alternative to separate manure processing, anaerobic stabilization of surplus manure and sewage sludge in combination is possible at municipal sewage treatment plants. Subsequently to the removal of solids, pig manure is fed into existing digesters. The process concept comprises the following partial steps: preliminary treatment of crude manure, anarobic stabilization of the separated manure fluid, biological nitrogen elimination from the digested mixture of sewage sludge and manure, and dewatering of the mixed sludge in the dewatering systems of the sewage treatment plant. (orig./SR) [Deutsch] Eine Alternative zu den Verfahren einer separaten Guelleaufbereitung stellt die gemeinsame anaerobe Stabilisierung von Ueberschussguelle und Klaerschlamm auf kommunalen Klaeranlagen dar, die eine Einspeisung feststoffseparierter Schweineguelle in bereits vorhandene Faulbehaelter vorsieht. Das Verfahrenskonzept besteht aus den Teilschritten Vorseparierung der Rohguelle, anaerobe Stabiliserung der separierten Guellefluessigkeit, biologische Stickstoffelimination aus dem ausgefaulten Klaerschlamm-Guelle-Gemisch sowie Entwaesserung der Mischschlaemme auf den Entwaesserungsaggregaten der Klaeranlage. (orig./SR)

  9. In Situ Immobilization of Uranium in Structured Porous Media via Biomineralization at the Fracture/Matrix Interface - Subproject to Co-PI Eric E. Roden. Final report

    International Nuclear Information System (INIS)

    Roden, Eric E.

    2007-01-01

    Although the biogeochemical processes underlying in situ bioremediation technologies are increasingly well understood, field-scale heterogeneity (both physical and biogeochemical) remains a major obstacle to successful field-scale implementation. In particular, slow release of contamination from low-permeability regions (primarily by diffusive/dispersive mass transfer) can hinder the effectiveness of remediation. The research described in this report was conducted in conjunction with a project entitled ''In Situ Immobilization of Uranium in Structured Porous Media via Biomineralization at the Fracture/Matrix Interface'', which was funded through the Field Research element of the former NABIR Program (now the Environmental Remediation Sciences Program) within the Office of Biological and Environmental Research. Dr. Timothy Scheibe (Pacific Northwest National Laboratory) was the overall PI/PD for the project, which included Scott Brooks (Oak Ridge National Laboratory) and Eric Roden (formerly at The University of Alabama, now at the University of Wisconsin) as separately-funded co-PIs. The overall goal of the project was to evaluate strategies that target bioremediation at interfaces between high- and low-permeability regions of an aquifer in order to minimize the rate of contaminant transfer into high-permeability/high fluid flow zones. The research was conducted at the Area 2 site of the Field Research Center (FRC) at Oak Ridge National Laboratory (ORNL). Area 2 is a shallow pathway for migration of contaminated groundwater to seeps in the upper reach of Bear Creek at ORNL, mainly through a ca. 1 m thick layer of gravel located 4-5 m below the ground surface. Hydrological tracer studies indicate that the gravel layer receives input of uranium from both upstream sources and from diffusive mass transfer out of highly contaminated fill and saprolite materials above and below the gravel layer. We sought to test the hypothesis that injection of electron donor into this

  10. Final Technical Report for the Energy Frontier Research Center Understanding Charge Separation and Transfer at Interfaces in Energy Materials (EFRC:CST)

    Energy Technology Data Exchange (ETDEWEB)

    Vanden Bout, David A. [Univ. of Texas, Austin, TX (United States)

    2015-09-14

    Our EFRC was founded with the vision of creating a broadly collaborative and synergistic program that would lead to major breakthroughs in the molecular-level understanding of the critical interfacial charge separation and charge transfer (CST) processes that underpin the function of candidate materials for organic photovoltaic (OPV) and electrical-energy-storage (EES) applications. Research in these energy contexts shares an imposing challenge: How can we understand charge separation and transfer mechanisms in the presence of immense materials complexity that spans multiple length scales? To address this challenge, our 50-member Center undertook a total of 28 coordinated research projects aimed at unraveling the CST mechanisms that occur at interfaces in these nanostructured materials. This rigorous multi-year study of CST interfaces has greatly illuminated our understanding of early-timescale processes (e.g., exciton generation and dissociation dynamics at OPV heterojunctions; control of Li+-ion charging kinetics by surface chemistry) occurring in the immediate vicinity of interfaces. Program outcomes included: training of 72 graduate student and postdoctoral energy researchers at 5 institutions and spanning 7 academic disciplines in science and engineering; publication of 94 peer-reviewed journal articles; and dissemination of research outcomes via 340 conference, poster and other presentations. Major scientific outcomes included: implementation of a hierarchical strategy for understanding the electronic communication mechanisms and ultimate fate of charge carriers in bulk heterojunction OPV materials; systematic investigation of ion-coupled electron transfer processes in model Li-ion battery electrode/electrolyte systems; and the development and implementation of 14 unique technologies and instrumentation capabilities to aid in probing sub-ensemble charge separation and transfer mechanisms.

  11. Parenting and Digital Media.

    Science.gov (United States)

    Coyne, Sarah M; Radesky, Jenny; Collier, Kevin M; Gentile, Douglas A; Linder, Jennifer Ruh; Nathanson, Amy I; Rasmussen, Eric E; Reich, Stephanie M; Rogers, Jean

    2017-11-01

    Understanding the family dynamic surrounding media use is crucial to our understanding of media effects, policy development, and the targeting of individuals and families for interventions to benefit child health and development. The Families, Parenting, and Media Workgroup reviewed the relevant research from the past few decades. We find that child characteristics, the parent-child relationship, parental mediation practices, and parents' own use of media all can influence children's media use, their attitudes regarding media, and the effects of media on children. However, gaps remain. First, more research is needed on best practices of parental mediation for both traditional and new media. Ideally, this research will involve large-scale, longitudinal studies that manage children from infancy to adulthood. Second, we need to better understand the relationship between parent media use and child media use and specifically how media may interfere with or strengthen parent-child relationships. Finally, longitudinal research on how developmental processes and individual child characteristics influence the intersection between media and family life is needed. The majority of children's media use takes place within a wider family dynamic. An understanding of this dynamic is crucial to understanding child media use as a whole. Copyright © 2017 by the American Academy of Pediatrics.

  12. Synthesis of Novel Polymeric Resins by Gamma Irradiation for Separation of In(III) ions from Cd(II) in Aqueous Media

    International Nuclear Information System (INIS)

    Massoud, A.; Abou El-Nour, F.; Killa, H.

    2012-01-01

    In this work, Zn(II)polymethacrylates and poly(acrylamide-acrylic acid) were prepared by gamma irradiation polymerization technique of the corresponding monomer at 30 kGy. The polymeric resins were mixed with Indium ions to determine its capacity in aqueous solutions using batch experiment. The adsorption efficiency of obtained polymeric resins toward In(III) and Cd(II) in different experimental conditions was established. Batch and column methods were applied for separation of indium and cadmium. The effects of various eluants such as H 2 SO 4 , NH 4 NO 3 , HNO 3 and HCl on the recovery of both metal ions were studied. The polymeric resins may be regenerated using 3M HCl solutions.

  13. Radiation synthesis of stimuli-responsive membranes, hydrogels and adsorbents for separation purposes. Final report of a coordinated research project 2000-2004

    International Nuclear Information System (INIS)

    2005-08-01

    This coordinated research project coordinated research work for the development of novel materials prepared by radiation processing techniques. Single and multi-pore polyamide membranes, fast thermo-responsive hydrogels, porous polymer monoliths, stimuli-responsive hydrogels based on natural and synthetic polymers, temperature responsive membranes, selective adsorbents, polymeric nanogels and novel non-ionic thermo-sensitive hydrogels were produced. The application areas explored for beneficially utilizing these novel materials included specialized drug delivery systems (DDS), selective adsorbents, nanopores for single molecule detection, membranes for separation and concentration of solutes, health care and remediation of environmental pollution. The report provides basic information on radiation processing and promotes experience exchange for further developments of radiation technology. Protocols and procedures of preparation of various stimuli responsive membranes and their actual and perspective applications are described in the report. Public awareness and technology acceptance are other factors to be considered for further dissemination. This publication summarizes the present status and the prospects of this technology

  14. Gas separation of landfill gas and other biogases by pressure swing adsorption. Final report. Gastrennung fuer Deponie- und Faulgase mittels Druckwechseltechnik. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pilarczyk, E; Mellech, L

    1986-01-01

    A new PSA-process for recovery of methane with SNG-quality from biogases was developed in the laboratory and successfully tested in field trials at the German landfill Emscherbruch/Gelsenkirchen. A special carbon molecular sieve on which carbon dioxide is adsorbed much faster than methane was proved as the best suited adsorbent for biogas separation. Even part of nitrogen which is mostly contained in landfill gases from leakage air is simultaneously removed from methane together with carbon dioxide by using the carbon molecular sieve. Low quality-SNG with 88-90% by vol. methane could be processed from landfill gas containing up to 15% by vol. nitrogen at an adsorption pressure of 3-9 bar abs. The recovery of methane goes upt to 98%. High quality-SNG can be processed from N/sub 2/-free biogases like sewage gas. The capital and operational cost (not including prepurification) for recovery of low quality-SNG by PSA is estimated to about 0,12 DM/m/sup 3/ SNG. (orig.) With 13 refs., 13 tabs., 16 figs.

  15. Arsenic Removal from Drinking Water by Adsorptive Media - U.S. EPA Demonstration Project at Rollinsford, NH, Final Performance Evaluation Report

    Science.gov (United States)

    This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Rollinsford, New Hampshire. The objectives of the project were to evaluate: 1) the effectiveness of AdEdge Technologies’ AD -33TM media ...

  16. Arsenic Removal from Drinking Water by Adsorptive Media - U.S. EPA Demonstration Project at Seely-Brown Village in Pomfret, CT - Final Performance Evaluation Report

    Science.gov (United States)

    This report documents the activities performed for and the results obtained from the arsenic removal treatment technology demonstration project at Seely-Brown Village in Pomfret, CT. The objectives of the project were to evaluate the effectiveness of ArsenXnp adsorption media in...

  17. One Health in social networks and social media.

    Science.gov (United States)

    Mekaru, S R; Brownstein, J S

    2014-08-01

    In the rapidly evolving world of social media, social networks, mobile applications and citizen science, online communities can develop organically and separately from larger or more established organisations. The One Health online community is experiencing expansion from both the bottom up and the top down. In this paper, the authors review social media's strengths and weaknesses, earlier work examining Internet resources for One Health, the current state of One Health in social media (e.g. Facebook, Twitter, YouTube) and online social networking sites (e.g. LinkedIn and ResearchGate), as well as social media in One Health-related citizen science projects. While One Health has a fairly strong presence on websites, its social media presence is more limited and has an uneven geographic distribution. In work following the Stone Mountain Meeting,the One Health Global Network Task Force Report recommended the creation of an online community of practice. Professional social networks as well as the strategic use of social media should be employed in this effort. Finally, One Health-related research projects using volunteers (citizen science) often use social media to enhance their recruitment. Including these researchers in a community of practitioners would take full advantage of their existing social media presence. In conclusion, the interactive nature of social media, combined with increasing global Internet access, provides the One Health community with opportunities to meaningfully expand their community and promote their message.

  18. Rational Synthesis of Imprinted Organofunctional Sol-Gel Materials for Toxic Metal Separation - Final Report - 09/15/1997 - 09/14/2001

    International Nuclear Information System (INIS)

    Xue, Ziling; Barnes, Craig E.; Dai, Shang

    2001-01-01

    novel class of materials tailored for toxic metal recognition/separation with enhanced capacity and selectivity. It will also provide the scientific basis for such recognition and the development of a new generation of technologies for more efficient toxic metal removal. Furthermore, these research results should be directly applicable to DOE Environmental Management (EM) missions

  19. Rational Synthesis of Imprinted Organofunctional Sol-Gel Materials for Toxic Metal Separation - Final Report - 09/15/1997 - 09/14/2001

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Ziling (Ben); Barnes, Craig E.; Dai, Shang

    2001-09-14

    . Success in this research will lead to a novel class of materials tailored for toxic metal recognition/separation with enhanced capacity and selectivity. It will also provide the scientific basis for such recognition and the development of a new generation of technologies for more efficient toxic metal removal. Furthermore, these research results should be directly applicable to DOE Environmental Management (EM) missions.

  20. The Media Mixer

    DEFF Research Database (Denmark)

    Vestergaard, Vitus; Mortensen, Christian Hviid

    2011-01-01

    content. The media content is created by the user in the museum's physical environment, but it can be mixed with material from web archives. It is the intention that the users learn about media through participatory and creative processes with media where the borders between producing, playing......We explore how remixing and content sharing can be used as a means for user participation in a digital museum age. Remix culture is seen as a culture that allows and encourages the production of derivative works; works that are based on already existing works. This cultural practice thrives...... throughout the Internet, most notably on web 2.0 sites like YouTube. The Media Museum has embraced the remix paradigm with the development of an interactive media experience centre called the Media Mixer. Here the museum users can produce, deconstruct, reconstruct and finally publish and share digital media...

  1. SOCIAL MEDIA

    Science.gov (United States)

    RESPONSIBILITY CENTCOM COALITION MEDIA SOCIAL MEDIA NEWS ARTICLES PRESS RELEASES IMAGERY VIDEOS TRANSCRIPTS VISITORS AND PERSONNEL FAMILY CENTER FAMILY READINESS CENTCOM WEBMAIL SOCIAL MEDIA SECURITY ACCOUNTABILITY HomeMEDIASOCIAL MEDIA Social Media CENTCOM'S ENGLISH SOCIAL MEDIA ACCOUNTS There are many U.S. military commands

  2. Separation of rubidium from irradiated aluminum-encapsulated uranium

    International Nuclear Information System (INIS)

    Horwitz, E.P.; Schmitz, F.J.; Rokop, D.J.

    1982-01-01

    A procedure was developed for separating rubidium from irradiated aluminum encapsulated uranium. The separations procedure produces a final ultra-high purity RbCl product for subsequent high performance mass spectrometric analysis. The procedure involves first removing most of the macro-components and fission products by strong base anion exchange using, first, concentrated HCl, then oxalic acid media and second, selectively separating rubidium from alkaline-earth ions and other alkali-metal ions, including cesium, using Bio-Rex-40 cation-exchange resin. The resultant RbCl is then put through a final vacuum sublimation step. Ultra-pure reagents and specially clean glassware are used throughout the procedure to minimize contamination by naturally-occurring rubidium

  3. Frecuencia de los formantes de las vocales medias en sílaba final de palabra con elisión de -/s/: un estudio con materiales de la norma culta de Las Palmas de Gran Canaria

    OpenAIRE

    Pérez Martín, Ana María; Troya Déniz, Magnolia

    2012-01-01

    [ES]El propósito de este artículo es comprobar si la supresión de -/s/ final de palabra condiciona la articulación de las vocales medias pronunciadas por hablantes con estudios universitarios de Las Palmas de Gran Canaria. Para ello, no solo se calculan las frecuencias de los formantes de /e/ y /o/ y se establecen sus campos de dispersión, sino que, además, se examina si la información gramatical de la consonante elidida o los factores sexo y edad pueden influir en la altura frecuencial de lo...

  4. Development of an Effective Transport Media for Juvenile Spring Chinook Salmon to Mitigate Stress and Improve Smolt Survival During Columbia River Fish Hauling Operations, 1985 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Wedemeyer, Gary A.

    1985-02-01

    Selected transport media consisting of mineral salt additions (Na/sup +/, Cl/sup -/, Ca/sup + +/, PO/sub 4//sup -3/, HCO/sub 3//sup -/, and Mg/sup + +/), mineral salts plus tranquilizing concentrations of tricaine methane sulfonate (MS-222), or MS-222 alone were tested for their ability to mitigate stress and increase smolt survival during single and mixed species hauling of Columbia River spring chinook salmon (Oncorhynchus tshawytscha) and steelhead trout (Salmo gairdneri). Successful stress mitigation was afforded by several formulations as indicated by protection against life-threatening osmoregulatory and other physiological dysfunctions, and against immediate and delayed hauling mortality. Effects on the seawater survival and growth of smolts hauled in transport media were used as the overall criterion of success. Of the fourteen chemical formulations tested, 10 ppM MS-222 emerged as top-rated in terms of ability to mitigate physiological stress during single and mixed species transport of juvenile spring chinook salmon at hauling densities of 0.5 or 1.0 lb/gallon. Immediate and delayed mortalities from hauling stress were also reduced, but benefits to early marine growth and survival were limited to about the first month in seawater. The two physical factors tested (reduced light intensity and water temperature) were generally less effective than mineral salt additions in mitigating hauling stress, but the degree of protection afforded by reduced light intensity was nevertheless judged to be physiologically beneficial. 36 refs., 1 fig., 19 tabs.

  5. The Media Mixer

    DEFF Research Database (Denmark)

    Vestergaard, Vitus; Mortensen, Christian Hviid

    In recent years many museums have experimented with different approaches to involving users through digital media. We explore how remixing and content sharing can be used as a means for user participation. Remix culture is seen as a culture that allows and encourages the production of derivative...... works; works that are based on already existing works. This cultural practice thrives throughout the Internet, most notably on web2.0 sites like YouTube. The Media Museum has embraced the remix paradigm with the development of an interactive media experience centre called the Media Mixer. Here...... the museum users can produce, deconstruct, reconstruct and finally publish and share digital media content. The media content is created by the user in the museums physical environment, but it can be mixed with material from local or global archives. In that way the gap between the analogue and the digital...

  6. Social media, help or hindrance: what role does social media play in young people's mental health?

    Science.gov (United States)

    Lloyd, Alfie

    2014-11-01

    Social media is a huge force in the lives of young people with wide ranging effects on their development; given the importance of adolescence in the genesis of mental illness, social media is a factor in the mental health of young people. Despite the role that social media obviously plays in the development of mental illness, little research has been done into the impact that social media has on in the mental illness of young people. In general, what research there is points towards social media having a large impact on young people in both positive and negative ways. In particular, certain studies show a greater incidence and severity of bullying online compared to offline which may contribute to the development of depression. This contrasts with the positive impact that social media seems to have for young people in minority groups (ethnic minorities and those with chronic disease or disability) by allowing them to connect with others who live similar lives despite geographical separation. This acts as a positive influence in these people's lives though a direct link to mental illness was not shown. Overall, several important issues are raised: firstly, the lack of research that has been conducted in the area; secondly, the gulf that exists between the generation of younger, 'digital native' generations and the older generations who are not as engaged with social media; and finally, the huge potential that exists for the use of social media as a protective influence for adolescents. With proper engagement, policy makers and health professionals could use social media to connect with young people on issues like mental health.

  7. A separator

    Energy Technology Data Exchange (ETDEWEB)

    Prokopyuk, S.G.; Dyachenko, A.Ye.; Mukhametov, M.N.; Prokopov, O.I.

    1982-01-01

    A separator is proposed which contains separating slanted plates and baffle plates installed at a distance to them at an acute angle to them. To increase the effectiveness of separating a gas and liquid stream and the throughput through reducing the secondary carry away of the liquid drops and to reduce the hydraulic resistance, as well, openings are made in the plates. The horizontal projections of each opening from the lower and upper surfaces of the plate do not overlap each other.

  8. Isotope separation

    International Nuclear Information System (INIS)

    Eerkens, J.W.

    1979-01-01

    A method of isotope separation is described which involves the use of a laser photon beam to selectively induce energy level transitions of an isotope molecule containing the isotope to be separated. The use of the technique for 235 U enrichment is demonstrated. (UK)

  9. El patrimonio de Hernando Alonso de Amusco, canónigo de la catedral de Coria, a finales de la Edad Media

    Directory of Open Access Journals (Sweden)

    Cotano Olivera, Fátima

    2008-06-01

    Full Text Available Studies about the cathedral's chapters in the Middle Ages have been essential to know the creation and subsequent evolution of bishoprics and dioceses of Spain. The conquest of the city of Coria by Alfonso VII, in 1142, and the restoration of the diocese were the definitive step for the origin and formation of the chapter. The documentation of chapter archive shows the cathedral as the administrative center and symbol of power of the diocese, especially during the Late Middle Ages. This extensive information has revealed the internal structure of the chapter —categories and functions—, social and economic stratification of each of its members, as well as its relationships with other ecclesiastical and civil institutions. However, there are few occasions when the documentation provides very comprenhensive information about life, work and customs of a Chapter member.

    Los estudios sobre los cabildos catedralicios durante la Edad Media han sido esenciales para conocer la creación y posterior evolución de los obispados y diócesis de España. La conquista de la ciudad de Coria por Alfonso VII, en 1142, y la restauración de la diócesis fueron el paso definitivo para el origen y formación del cabildo. La documentación del archivo capitular muestra a la catedral como centro administrativo y símbolo de poder de la diócesis, especialmente durante la Baja Edad Media. Esta amplia información ha permitido conocer la estructura interna del cabildo —categorías y funciones—, la estratificación social y económica de cada uno de los miembros que lo componen, así como las relaciones del capítulo con otras instituciones eclesiásticas y civiles. Sin embargo, son escasas las ocasiones en las que la documentación aporta una información tan completa acerca de la vida, obra y costumbres de un miembro capitular.

  10. CENTRIFUGAL SEPARATORS

    Science.gov (United States)

    Skarstrom, C.

    1959-03-10

    A centrifugal separator is described for separating gaseous mixtures where the temperature gradients both longitudinally and radially of the centrifuge may be controlled effectively to produce a maximum separation of the process gases flowing through. Tbe invention provides for the balancing of increases and decreases in temperature in various zones of the centrifuge chamber as the result of compression and expansions respectively, of process gases and may be employed effectively both to neutralize harmful temperature gradients and to utilize beneficial temperaturc gradients within the centrifuge.

  11. Microparticle Separation by Cyclonic Separation

    Science.gov (United States)

    Karback, Keegan; Leith, Alexander

    2017-11-01

    The ability to separate particles based on their size has wide ranging applications from the industrial to the medical. Currently, cyclonic separators are primarily used in agriculture and manufacturing to syphon out contaminates or products from an air supply. This has led us to believe that cyclonic separation has more applications than the agricultural and industrial. Using the OpenFoam computational package, we were able to determine the flow parameters of a vortex in a cyclonic separator in order to segregate dust particles to a cutoff size of tens of nanometers. To test the model, we constructed an experiment to separate a test dust of various sized particles. We filled a chamber with Arizona test dust and utilized an acoustic suspension technique to segregate particles finer than a coarse cutoff size and introduce them into the cyclonic separation apparatus where they were further separated via a vortex following our computational model. The size of the particles separated from this experiment will be used to further refine our model. Metropolitan State University of Denver, Colorado University of Denver, Dr. Randall Tagg, Dr. Richard Krantz.

  12. Isotopic separation

    International Nuclear Information System (INIS)

    Castle, P.M.

    1979-01-01

    This invention relates to molecular and atomic isotope separation and is particularly applicable to the separation of 235 U from other uranium isotopes including 238 U. In the method described a desired isotope is separated mechanically from an atomic or molecular beam formed from an isotope mixture utilising the isotropic recoil momenta resulting from selective excitation of the desired isotope species by radiation, followed by ionization or dissociation by radiation or electron attachment. By forming a matrix of UF 6 molecules in HBr molecules so as to collapse the V 3 vibrational mode of the UF 6 molecule the 235 UF 6 molecules are selectively excited to promote reduction of UF 6 molecules containing 235 U and facilitate separation. (UK)

  13. Isotopic separation

    International Nuclear Information System (INIS)

    Chen, C.L.

    1979-01-01

    Isotopic species in an isotopic mixture including a first species having a first isotope and a second species having a second isotope are separated by selectively exciting the first species in preference to the second species and then reacting the selectively excited first species with an additional preselected radiation, an electron or another chemical species so as to form a product having a mass different from the original species and separating the product from the balance of the mixture in a centrifugal separating device such as centrifuge or aerodynamic nozzle. In the centrifuge the isotopic mixture is passed into a rotor where it is irradiated through a window. Heavier and lighter components can be withdrawn. The irradiated mixture experiences a large centrifugal force and is separated in a deflection area into lighter and heavier components. (UK)

  14. Separations chemistry

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Results of studies on the photochemistry of aqueous Pu solutions and the stability of iodine in liquid and gaseous CO 2 are reported. Progress is reported in studies on: the preparation of macroporous bodies filled with oxides and sulfides to be used as adsorbents; the beneficiation of photographic wastes; the anion exchange adsorption of transition elements from thiosulfate solutions; advanced filtration applications of energy significance; high-resolution separations; and, the examination of the separation agents, octylphenylphosphoric acid (OPPA) and trihexyl phosphate (THP)

  15. Isotopic separation

    International Nuclear Information System (INIS)

    Chen, C.L.

    1982-01-01

    A method is described for separating isotopes in which photo-excitation of selected isotope species is used together with the reaction of the excited species with postive ions of predetermined ionization energy, other excited species, or free electrons to produce ions or ion fragments of the selected species. Ions and electrons are produced by an electrical discharge, and separation is achieved through radial ambipolar diffusion, electrostatic techniques, or magnetohydrodynamic methods

  16. Rapid ion-exchange separations of actinides

    International Nuclear Information System (INIS)

    Usuda, Shigekazu

    1988-01-01

    For the purpose of studying short-lived actinide nuclides, three methods for rapid ion exchange separation of actinide elements with mineral acid-alcohol mixed media were developed: anion exchange with nitric acid-methyl alcohol mixed media to separate the transplutonium and rare earth elements from target material, U or Pu and Al catcher foils; anion exchange with hydrochloric acid-methyl alcohol media to separate Am+Cm, Bk and Cf+Fm from the target, catcher foils and major fission products; and cation exchange with hydrochloric acid-methyl alcohol media and with concentrated hydrochloric acid to separate the transplutonium elements as a group from the rare earths after eliminating the large amounts of U, Al, Cu, Fe etc. The methods enable one to perform rapid and effective separation at elevated temperature (90 deg C) and immediate source preparation for alpha-ray spectrometry. (author) 47 refs.; 10 figs

  17. Separation unit for uranium isotopes etc

    International Nuclear Information System (INIS)

    1975-01-01

    The task of the invention - improving the efficiency of a uranium isotope separation unit with a rotor as separation chamber by improving its flow characteristics - is solved by a central-axial gas conduction system with radial branches which leads the media into the separation chambers or out of these. (UWI) [de

  18. Media exposure and health in Europe: Mediators and moderators of media systems

    NARCIS (Netherlands)

    Blom, N.; Zanden, R. van der; Buijzen, M.A.; Scheepers, P.L.H.

    2016-01-01

    This study examined media exposure as an explanatory factor for individual and cross-national differences in self-assessed general health. In studying media exposure, traditional media (television, radio, and newspapers) and contemporary media (internet) were separately considered. Aside from

  19. Media education.

    Science.gov (United States)

    Strasburger, Victor C

    2010-11-01

    The American Academy of Pediatrics recognizes that exposure to mass media (eg, television, movies, video and computer games, the Internet, music lyrics and videos, newspapers, magazines, books, advertising) presents health risks for children and adolescents but can provide benefits as well. Media education has the potential to reduce the harmful effects of media and accentuate the positive effects. By understanding and supporting media education, pediatricians can play an important role in reducing harmful effects of media on children and adolescents.

  20. Separation system

    International Nuclear Information System (INIS)

    Rubin, L.S.

    1986-01-01

    A disposal container is described for use in disposal of radioactive waste materials consisting of: top wall structure, bottom wall structure, and circumferential side wall structure interconnecting the top and bottom wall structures to define an enclosed container, separation structure in the container adjacent the inner surface of the side wall structure for allowing passage of liquid and retention of solids, inlet port structure in the top wall structure, discharge port structure at the periphery of the container in communication with the outer surface of the separation structure for receiving liquid that passes through the separation structure, first centrifugally actuated valve structure having a normal position closing the inlet port structure and a centrifugally actuated position opening the inlet port structure, second centrifugally actuated valve structure having a normal position closing the discharge port structure and a centrifugally actuated position opening the discharge port structure, and coupling structure integral with wall structure of the container for releasable engagement with centrifugal drive structure

  1. Separable algebras

    CERN Document Server

    Ford, Timothy J

    2017-01-01

    This book presents a comprehensive introduction to the theory of separable algebras over commutative rings. After a thorough introduction to the general theory, the fundamental roles played by separable algebras are explored. For example, Azumaya algebras, the henselization of local rings, and Galois theory are rigorously introduced and treated. Interwoven throughout these applications is the important notion of étale algebras. Essential connections are drawn between the theory of separable algebras and Morita theory, the theory of faithfully flat descent, cohomology, derivations, differentials, reflexive lattices, maximal orders, and class groups. The text is accessible to graduate students who have finished a first course in algebra, and it includes necessary foundational material, useful exercises, and many nontrivial examples.

  2. Isotope separation

    International Nuclear Information System (INIS)

    Bartlett, R.J.; Morrey, J.R.

    1978-01-01

    A method and apparatus is described for separating gas molecules containing one isotope of an element from gas molecules containing other isotopes of the same element in which all of the molecules of the gas are at the same electronic state in their ground state. Gas molecules in a gas stream containing one of the isotopes are selectively excited to a different electronic state while leaving the other gas molecules in their original ground state. Gas molecules containing one of the isotopes are then deflected from the other gas molecules in the stream and thus physically separated

  3. Extractive separation of tellurium(4)

    International Nuclear Information System (INIS)

    Gawali, S.B.; Shinde, V.M.

    1977-01-01

    A method is described for the extraction of tellurium (4) from hydrobromic acid media using 4-methyl-2-pentanol as an extractant. The method affords the determination of tellurium after its separation from Se, Au, Cu, Pb, Fe, Os, V and Al. (author)

  4. Media Komunitas dan Media Literacy

    Directory of Open Access Journals (Sweden)

    Pawito .

    2013-12-01

    Full Text Available Abstract:This essay deals with community media in relation to media literacy. After a short discussion on a number of community media characters is made the essay goes further with somewhat detail theoretical presumptions of the roles of media community with respect primarily to the development as Amartya Sen mentioned about. The author suggests that community media may play some significant roles in the development including (a disseminating information (from varieties of perspective, (b facilitating public discussion, (c helping to reach solutions of problems, (d encouraging participations, and (e encouraging the development of media literacy. Regarding the last point the author remarks that media community may have a dual-roles i.e facilitating community’s member in media participation and facilitating community’s member in media education.

  5. 75 FR 77670 - SuperMedia, LLC, Formerly Known as Idearc Media, LLC, a Subsidiary of SuperMedia Information...

    Science.gov (United States)

    2010-12-13

    ... Known as Idearc Media, LLC, a Subsidiary of SuperMedia Information Services, LLC Publishing Group, Troy... Subsidiary of SuperMedia Information Services, LLC, Troy, New York, to apply for Trade Adjustment Assistance..., Publishing Group, Troy, New York, who became totally or partially separated from employment on or after...

  6. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on first term final research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo (daiikki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-30

    The first term has performed research and development placing emphasis on that 'the basic study on membrane separation is to be performed systematically to elucidate governing factors in membrane separation'. With respect to water/ethanol separation by using the penetration gasifying method, it was indicated that excellent separation performance can be exhibited by using natural polymers having sugar chain skeleton as a raw material, and by controlling the membrane structure by means of membrane manufacturing methods. For enhancement of performance in water selective permeation type separation membrane, it was shown experimentally that it is important to select a membrane suitable for the object of separation and a separation method that uses the selected membrane. Regarding the water/ethanol separation, it was shown theoretically that the penetration gasifying method can save more energy than the conventional distillation method, where the development target was presented. It was recognized that impregnation type liquid membrane using crown ether can separate amino acid optical isomers. High separation performance was obtained in carbon monoxide/nitrogen separation by using fluid carrier that uses cuprous iodine/1-methyl imidazole. (NEDO)

  7. Recent or imminent separation and intimate violence against women. A conceptual overview and some Canadian examples.

    Science.gov (United States)

    Sev'er, A

    1997-12-01

    The link between recent or imminent separation and violence against female partners is discussed. Interviews were conducted among 87 divorced, separated and domestic violence survivors during 1985-88 to study violence perpetrated by men against their female intimate partners. Various bodies of literature are reviewed to establish the fact that separation heightens the risk of violence. The conceptual contributions of social learning and power and control theories are presented as they pertain to intimate violence against women. An expanded version of the power-and-control model is used to underscore the violence proneness of separations, especially when women initiate separations. To illustrate the expanded model, numerous Canadian examples are provided, drawn from interviews with divorced women, survivors of intimate violence, and news media reports. Finally, different strategies to break the cycle of violence are summarized.

  8. Research directed at developing a classical theory to describe isotope separation of polyatomic molecules illuminated by intense infrared radiation. Final report, May 7-September 30, 1979, extension December 31, 1979

    International Nuclear Information System (INIS)

    Lamb, W.E. Jr.

    1981-12-01

    This final report describes research on the theory of isotope separation produced by the illumination of polyatomic molecules by intense infrared laser radiation. This process is investigated by treating the molecule, sulfur hexafluoride, as a system of seven classical particles that obey the Newtonian equations of motion. A minicomputer is used to integrate these differential equations. The particles are acted on by interatomic forces, and by the time-dependent electric field of the laser. We have a very satisfactory expression for the interaction of the laser and the molecule which is compatible with infrared absorption and spectroscopic data. The interatomic potential is capable of improvement, and progress on this problem is still being made. We have made several computer runs of the dynamical behavior of the molecule using a reasonably good model for the interatomic force law. For the laser parameters chosen, we find that typically the molecule passes quickly through the resonance region into the quasi-continuum and even well into the real continuum before dissociation actually occurs. When viewed on a display terminal, the motions are exceedingly complex. As an aid to the visualization of the process, we have made a number of 16 mm movies depicting a three-dimensional representation of the motion of the seven particles. These show even more clearly the enormous complexity of the motions, and make clear the desirability of finding ways of characterizing the motion in simple ways without giving all of the numerical detail. One of the ways to do this is to introduce statistical parameters such as a temperature associated with the distribution of kinetic energies of the single particle. We have made such an analysis of our data runs, and have found favorable indications that such methods will prove useful in keeping track of the dynamical histories

  9. Research Directed at Developing a Classical Theory to Describe Isotope Separation of Polyatomic Molecules Illuminated by Intense Infrared Radiation. Final Report for period May 7, 1979 to September 30, 1979; Extension December 31, 1997

    Science.gov (United States)

    Lamb, W. E. Jr.

    1981-12-01

    This final report describes research on the theory of isotope separation produced by the illumination of polyatomic molecules by intense infrared laser radiation. This process is investigated by treating the molecule, sulfur hexafluoride, as a system of seven classical particles that obey the Newtonian equations of motion. A minicomputer is used to integrate these differential equations. The particles are acted on by interatomic forces, and by the time-dependent electric field of the laser. We have a very satisfactory expression for the interaction of the laser and the molecule which is compatible with infrared absorption and spectroscopic data. The interatomic potential is capable of improvement, and progress on this problem is still being made. We have made several computer runs of the dynamical behavior of the molecule using a reasonably good model for the interatomic force law. For the laser parameters chosen, we find that typically the molecule passes quickly through the resonance region into the quasi-continuum and even well into the real continuum before dissociation actually occurs. When viewed on a display terminal, the motions are exceedingly complex. As an aid to the visualization of the process, we have made a number of 16 mm movies depicting a three-dimensional representation of the motion of the seven particles. These show even more clearly the enormous complexity of the motions, and make clear the desirability of finding ways of characterizing the motion in simple ways without giving all of the numerical detail. One of the ways to do this is to introduce statistical parameters such as a temperature associated with the distribution of kinetic energies of the single particle. We have made such an analysis of our data runs, and have found favorable indications that such methods will prove useful in keeping track of the dynamical histories.

  10. On separable Pauli equations

    International Nuclear Information System (INIS)

    Zhalij, Alexander

    2002-01-01

    We classify (1+3)-dimensional Pauli equations for a spin-(1/2) particle interacting with the electro-magnetic field, that are solvable by the method of separation of variables. As a result, we obtain the 11 classes of vector-potentials of the electro-magnetic field A(t,x(vector sign))=(A 0 (t,x(vector sign)), A(vector sign)(t,x(vector sign))) providing separability of the corresponding Pauli equations. It is established, in particular, that the necessary condition for the Pauli equation to be separable into second-order matrix ordinary differential equations is its equivalence to the system of two uncoupled Schroedinger equations. In addition, the magnetic field has to be independent of spatial variables. We prove that coordinate systems and the vector-potentials of the electro-magnetic field providing the separability of the corresponding Pauli equations coincide with those for the Schroedinger equations. Furthermore, an efficient algorithm for constructing all coordinate systems providing the separability of Pauli equation with a fixed vector-potential of the electro-magnetic field is developed. Finally, we describe all vector-potentials A(t,x(vector sign)) that (a) provide the separability of Pauli equation, (b) satisfy vacuum Maxwell equations without currents, and (c) describe non-zero magnetic field

  11. Social Media in IS Literature

    DEFF Research Database (Denmark)

    Dyrby, Signe

    2013-01-01

    The phenomenon of ‘digital living’ is to a high extent influenced by the introduction of new media into society. Especially, social media are affecting the digital world of today and are setting the agenda for social connectedness in private, public and commercial networks. Based in an initial...... desire to explore a research agenda for the workings of social media in network structures a look into the literature on social media within the field of Information Systems sparked an interest in exploring a new research perspective for social media. Reviewing the IS literature it is apparent...... that the perspective of the ‘media’ as an artifact of social media has been neglected in existing literature. Based in this, this paper proposes research possibilities for investigating the ‘media’ of social media as well as some theoretical considerations that could aid the investigation. Finally, potential outcomes...

  12. Locative media

    CERN Document Server

    Wilken, Rowan

    2014-01-01

    Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

  13. Media Entrepreneurship

    DEFF Research Database (Denmark)

    Khajeheian, Datis

    2017-01-01

    Media Entrepreneurship has been an ambiguous, unclear and controversial concept and despite of growing academic efforts in the last decade, it is still a poorly defined subject. This paper is an effort to fill this gap by providing a comprehensive definition of media entrepreneurship. Firstly......, a literature review conducted and entrepreneurship, media, opportunity and innovation as building blocks of media entrepreneurship explained. Then by using of a mixed of bibliographic method and a Delphi method with multi-stage analysis process, a consensual definition of media entrepreneurship proposed...... entrepreneurship....

  14. Media Framing

    DEFF Research Database (Denmark)

    Pedersen, Rasmus T.

    2017-01-01

    The concept of media framing refers to the way in which the news media organize and provide meaning to a news story by emphasizing some parts of reality and disregarding other parts. These patterns of emphasis and exclusion in news coverage create frames that can have considerable effects on news...... consumers’ perceptions and attitudes regarding the given issue or event. This entry briefly elaborates on the concept of media framing, presents key types of media frames, and introduces the research on media framing effects....

  15. Gas separating

    Science.gov (United States)

    Gollan, A.

    1988-03-29

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  16. Isotope separation

    International Nuclear Information System (INIS)

    Rosevear, A.; Sims, H.E.

    1985-01-01

    sup(195m)Au for medical usage is separated from sup(195m)Hg in a solution containing ions of sup(195m)Hg by contacting the solution with an adsorbing agent to adsorb 195 Hgsup(H) thereon, followed by selective elution of sup(195m)Au generated by radioactive decay of the sup(195m)Hg. The adsorbing agent comprises a composite material in the form of an inert porous inorganic substrate (e.g. Kieselguhr),the pores of which are occupied by a hydrogel of a polysaccharide (e.g. agarose) carrying terminal thiol groups for binding Hgsup(H) ions. (author)

  17. Representative of the Media

    International Nuclear Information System (INIS)

    Domenech, F.

    2007-01-01

    Francesc Domenech recalled that the Vandellos-I accident created a very difficult situation for the nuclear industry. During the crisis the nuclear sector decided not to participate in any media activities. Finally, the industry realised that not being open only exacerbated the credibility crisis. The closure of the Vandellos -I power plant decreased the stress and offered an opportunity for the nuclear sector to change its attitude and public relations. In Mr. Domenech's view the Vandellos-I decommissioning project is a technical challenge undertaken by society. ENRESA made great efforts to rebuild mutual trust between the nuclear industry and the media. For the first time, journalists were provided with fluid data, some of them very complex, which the media had to render more understandable for the public. Finally, Mr. Domenech observed that nowadays it is the regulator which most needs to gain credibility. (author)

  18. Sensitive Media

    Directory of Open Access Journals (Sweden)

    Malinowska Anna

    2017-12-01

    Full Text Available The paper engages with what we refer to as “sensitive media,” a concept associated with developments in the overall media environment, our relationships with media devices, and the quality of the media themselves. Those developments point to the increasing emotionality of the media world and its infrastructures. Mapping the trajectories of technological development and impact that the newer media exert on human condition, our analysis touches upon various forms of emergent affect, emotion, and feeling in order to trace the histories and motivations of the sensitization of “the media things” as well as the redefinition of our affective and emotional experiences through technologies that themselves “feel.”

  19. Media Ecology

    Directory of Open Access Journals (Sweden)

    Marina Ašković

    2015-05-01

    Full Text Available Does the trend in which electronic media are gradually becoming extension of human body have to move towards full enslavement of a human and his personality, or the same human will unpredictably, with the aid of his personal media literacy, exit the whirls of media and technological censorships? Personality crisis is closely related to the crisis of language no matter how contradicted to global ideology of transnational transhumanism it may seem. Considering the fact that recent media presentations of the world are based on commercialization of environmentalism, philosophical and aesthetic thought appears as an important subject of ecology. As media mediates, the scenery of civilized living increasingly becomes more appealing even though it derives from commercial and political background. Consequently, the future of humanity depends by large on the philosophy of media. Media have to truly ecologise returning the humanum to its essence making it into the extension of the natural world.

  20. El final de la edad media

    OpenAIRE

    Villacañas Berlanga, José Luís

    2015-01-01

    This essay wishes to explain the breakdown of Spanish normative conscience, settled in a mimetic use of history, recognised as magistra vitae, which offers the accredited behavioural models for the ruler at the same time that it deconstructs them from a precise conscience of their non-adaptation to the present. In this sense, Saavedra experiences in his time and in the political order the same methodical doubt Descartes experienced in the field of sciences. Nonetheless, his scepticism serves ...

  1. Media Flow

    DEFF Research Database (Denmark)

    Kabel, Lars

    2016-01-01

    News and other kinds of journalistic stories, 16-17 hours a day, all year round, on all platforms, also the moderated social media. The key research thesis behind this article is that the continuous and speedy stream of news stories and media content now is becoming the centre of the production...... processes and the value creation in converged multimedia newsrooms. The article identify new methods and discuss editorial challenges in handling media flow....

  2. Separation of lanthanides through hydroxyapatite; Separacion de lantanidos mediante hidroxiapatita

    Energy Technology Data Exchange (ETDEWEB)

    Garcia M, F.G

    2006-07-01

    With the objective of obtaining from an independent way to each one of the lanthanides {sup 151} Pm, {sup 161} Tb, {sup 166} Ho and {sup 177} Lu free of carrier and with high specific activities starting from the indirect irradiation via, it intends in this work to determine the viability of separation of the couples Nd/Pm, Dy/Ho, Gd/Tb and Yb/Lu, by means of ion exchange column chromatography, using hydroxyapatite (HAp) and fluorite like absorbent material in complexing media. It is important to mention that have registered separation studies among lanthanides of the heavy group with those of the slight group, using the same mass and, in comparison with this work, quantities different from the father were used and of the son, also, that the separation studies were carried out among neighboring lanthanides. In this investigation, it was determined the effect that its have the complexing media: KSCN, sodium tartrate, sodium citrate, EDTA and aluminon, their pH and concentration, in the adsorption of the lanthanides in both minerals, in order to determine the chromatographic conditions for separation of the couples Nd/Pm, Dy/Ho, Gd/Tb and Yb/Lu. The work consists of five chapters, in the first one they are presented a theoretical introduction of the characteristics more important of the lanthanides, the hydroxyapatite and the fluorite; in the second, it is deepened in the ion exchange, as well as the two techniques (XRD and High Vacuum Electron Microscopy) to make the characterization of LnCI{sub 3} (Ln = Nd, Gd, Dy or Yb) synthesized. The third chapter, it describes the methodology continued in our experimental work; in the room, its are presented the obtained results of the static and dynamic method to determine the viability of separation of neighboring lanthanides; and finally, the five chapter shows the conclusions. In this study, it is concludes that the separation among neighboring lanthanides cannot be carried out in the minerals and used media; because

  3. Social Media, Traditional Media and Marketing Communication of Public Relations

    DEFF Research Database (Denmark)

    Khajeheian, Datis; Mirahmadi, Fereshteh

    2015-01-01

    Public relations are undertaking more important role in the marketing communication and advertising. The present paper reports a survey conducted in three Iranian banks’ public relations departments to understand how they use different media in their marketing communications and other related...... functions. A classification of public relations functions including fourteen functions in three categories has taken as research framework and by using a questionnaire, eight media have been asked to rank for each function, includes Television, Radio, Newspaper, Magazine, Classified Ads, Internet Websites......, Social media and finally Mobile and SMS ads. Findings show that traditional media still play a dominant role in media consumption of public relations, while new Web2.0 media consist of Mobile communications and Social networks, have never ranked better than fifth from eight. Some reasons have been argues...

  4. Separations chemistry

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Infrared spectra of Pu(IV) polymer show effects of CO 2 adsorption and of aging. Uv light (300 nm) increases the rate of reduction of PuO 2 2+ and Pu 4+ to Pu 3+ and the Pu--U separation factor using TBP. Distribution ratios for Zr and Hf between Dowex 50W--X8 resin and H 2 SO 4 solutions were found to decrease sharply with H 2 SO 4 content. Octylphenyl acid phosphate, a mixture of monooctylphenyl and dioctylphenyl phosphoric acids, is being studied for U recovery from wet-process phosphoric acid. A study of HNO 3 leaching of Ra from U ores was completed. Effects of particle size of the packed bed on the dispersion of the boundary of the miscible phase used in oil recovery are being studied. Effects of sulfonates on toluene--n-butanol--water phase relations were determined, as were the effects of salts and solutes on the max water content of 1:1 toluene--alcohol solutions. A study was begun of hydrocarbon solubility in water--surfactant--alcohol. The mechanism of the formation of hydrous ZrO 2 --polyacrylate membranes and their use for sulfate rejection were studied. Salt rejection through hyperfiltration by clay membranes (bentonite and kaolin) was also investigated. Preliminary results are given for hyperfiltration of wood-pulping wastes by ZrO 2 membranes. 13 figures

  5. Researching media through practices: an ethnographic approach

    Directory of Open Access Journals (Sweden)

    Antoni Roig

    2009-05-01

    Full Text Available Anthropological and ethnographic research on media have been largely focused on analyzing reception of media products (television, radio, press and film and media consumption related to domestic appropriation of technologies (Rothenbuhler et al., 2005. There is also a wide body of research devoted to the study of the political dimension of alternative and indigenous media (Ginsburg, 2002. However, there has been a separation between media and internet studies, and between the analysis of media reception and practices of self-production, such as family photography or home video. Current digital media practices urge reexamination of self-produced content and media flows from a broader perspective that cuts across divisions between public and private, corporative media products and people's releases, home production and cultural industry, political activism and everyday life.

  6. Mobile Media Photography

    DEFF Research Database (Denmark)

    Svabo, Connie; Shanks, Michael

    2013-01-01

    Mobile media photography marks a shift in orientation from the image towards photography as a mode of engagement. This leads is to explore the processes of experience and documentation that mobile media help to constitute. We unfold two aspects of the process of photography: photography as temporal......, archaeological engagement, and photography as spatial, geographical engagement. Finally, as a closing perspective we point out that vernacular photography may be read as an intersection between a personal means of expression and corporate financial interest....

  7. Multisided Media Markets

    DEFF Research Database (Denmark)

    Lindstädt, Nadine

    Media markets recently have been identified as multisided markets. The application of the theory of multisided markets provides a better understanding of such markets. It enriched the hitherto economic approach and led to new insights and perspectives especially for the antitrust authorities when...... evaluating competition constraints and mergers. This paper reviews the theory of multisided markets and subsequently applies it to media markets. Finally the paper draws attention to the new perspectives and insights the theory provides but also brings open research questions to light....

  8. Instructional Media

    African Journals Online (AJOL)

    This can be summed up in a few words: Students can learn a great deal from any of the media. Under most of the conditions tested, they could learn as much as from ... Beyond physical conditions (deafness) there is little reason to expect a differential media. Scientia Militaria, South African Journal of Military Studies, Vol 13 ...

  9. Mixed Media

    Science.gov (United States)

    Peterson, Erin

    2010-01-01

    While institutions do not often have a hook as compelling as an eagerly awaited movie, great content is critical for media relations success--and coupling it with the right distribution channel can ensure the story finds the right audience. Even better, retooling it for several media platforms can extend the life and reach of a story. The changes…

  10. Media darling

    CERN Multimedia

    Chalmers, Matthew

    2008-01-01

    He is the media-friendly face of particle physics, appearing on countless TV and radio shows in the run-up to the opening of CERN's Large Hadron Collider. Matthew Chalmers discovers how Brian Cox finds the time to be both a physicist and a media personality. (2 pages)

  11. Media Art

    DEFF Research Database (Denmark)

    Ekman, Ulrik

    2015-01-01

    environments, experience time, and develop identities individually and socially. Interviews with working media artists lend further perspectives on these cultural transformations. Drawing on cultural theory, new media art studies, human-computer interaction theory, and software studies, this cutting-edge book...... critically unpacks the complex ubiquity-effects confronting us every day....

  12. Social Media Participation in an Activist Movement for Racial Equality.

    Science.gov (United States)

    De Choudhury, Munmun; Jhaver, Shagun; Sugar, Benjamin; Weber, Ingmar

    2016-05-01

    From the Arab Spring to the Occupy Movement, social media has been instrumental in driving and supporting socio-political movements throughout the world. In this paper, we present one of the first social media investigations of an activist movement around racial discrimination and police violence, known as "Black Lives Matter". Considering Twitter as a sensor for the broader community's perception of the events related to the movement, we study participation over time, the geographical differences in this participation, and its relationship to protests that unfolded on the ground. We find evidence for continued participation across four temporally separated events related to the movement, with notable changes in engagement and language over time. We also find that participants from regions of historically high rates of black victimization due to police violence tend to express greater negativity and make more references to loss of life. Finally, we observe that social media attributes of affect, behavior and language can predict future protest participation on the ground. We discuss the role of social media in enabling collective action around this unique movement and how social media platforms may help understand perceptions on a socially contested and sensitive issue like race.

  13. Social Media's New Role in Emergency Management

    Energy Technology Data Exchange (ETDEWEB)

    Ethan Huffman; Sara Prentice

    2008-03-01

    As technology continues to evolve, emergency management organizations must adapt to new ways of responding to the media and public. This paper examines a brief overview of social media's new role in emergency management. This includes definitions of social media, the benefits of utilizing social media, examples of social media being used and finally a discussion of how agencies, such as Department of Energy national laboratories, can begin including social media in their emergency management plans.

  14. Cavitational Hydrothermal Oxidation: A New Remediation Process - Final Report; FINAL

    International Nuclear Information System (INIS)

    Suslick, K. S.

    2001-01-01

    During the past year, we have continued to make substantial scientific progress on our understanding of cavitation phenomena in aqueous media and applications of cavitation to remediation processes. Our efforts have focused on three separate areas: sonoluminescence as a probe of conditions created during cavitational collapse in aqueous media, the use of cavitation for remediation of contaminated water, and an addition of the use of ultrasound in the synthesis of novel heterogeneous catalysts for hydrodehalogenation of halocarbons under mild conditions

  15. Media for Reflection

    DEFF Research Database (Denmark)

    Knudsen, Morten

    2016-01-01

    This article develops the concept media for reflection in the interest of conceptualizing the interpretative frames that enable and limit reflection in management and leadership education. The concept ‘media for reflection’ allows us to conceptualize the social and cultural mediation of reflection...... without reducing reflection to an effect of the social structures and cultural norms in which it is embedded. Based on the developed theoretical framework, this article analyses how a renaissance ‘mirror for princes’ and contemporary research-based management education mediate reflection. The content...... of the mediations is analysed as well as the societal and organizational background. Furthermore, the means by which the two media enable and limit reflection in different ways is compared. Finally, the article discusses possible implications of the analysis in terms of management and leadership education....

  16. Media violence.

    Science.gov (United States)

    Cantor, J

    2000-08-01

    Research on the effects of media violence is not well understood by the general public. Despite this fact, there is an overwhelming consensus in the scientific literature about the unhealthy effects of media violence. Meta-analyses show that media-violence viewing consistently is associated with higher levels of antisocial behavior, ranging from the trivial (imitative violence directed against toys) to the serious (criminal violence), with many consequential outcomes in between (acceptance of violence as a solution to problems, increased feelings of hostility, and the apparent delivery of painful stimulation to another person). Desensitization is another well-documented effect of viewing violence, which is observable in reduced arousal and emotional disturbance while witnessing violence, the reduced tendency to intervene in a fight, and less sympathy for the victims of violence. Although there is evidence that youth who are already violent are more likely to seek out violent entertainment, there is strong evidence that the relationship between violence viewing and antisocial behavior is bidirectional. There is growing evidence that media violence also engenders intense fear in children which often lasts days, months, and even years. The media's potential role in solutions to these problems is only beginning to be explored, in investigations examining the uses and effects of movie ratings, television ratings, and the V-chip, and the effects of media literacy programs and public education efforts. Future research should explore important individual differences in responses to media violence and effective ways to intervene in the negative effects.

  17. Social Media Across the Organization

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth; Mohammadreza, Marjan

    2016-01-01

    Social Media studies tend to focus on either internal (Friedl & Verčič, 2011; Huang et al, 2013) or external communication (Briones et al, 2011; Hanna et al, 2011; Saschi, 2012; Byrd, 2012; Kilgour et al, 2015) , rather than addressing social media across the organization. This is problematic...... because of the diversity in perspectives about how social media should be deployed among competing department perspectives in an organization are generally not explicitly considered when internal and external communication are dealt with separately. These diverse perspectives lead to tensions between...... differing needs and practices across the organization that affect the understanding of social media value and use, as well as how social media fits with overall communication strategy planning. To address this issue, we have conceptualized the “Online Reputation Chain” as a metaphor for understanding social...

  18. Irradiated uranium reprocessing, Final report I-VI, Part VI - Separation of uranium, plutonium and fission products from HNO3 solution on the zirconium phosphate (part I), Adsorption equilibrium and kinetics

    International Nuclear Information System (INIS)

    Gal, I.; Ruvarac, A.

    1961-12-01

    Separation of uranium, plutonium and long-lived fission products was investigated on a inorganic ion exchanger. Zirconium phospate was chosen for this purpose because its ion exchanger properties were well known. This report deals with the study of equilibrium and kinetics of the adsorption

  19. From Augmentation Media to Meme Media.

    Science.gov (United States)

    Tanaka, Yuzuru

    Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

  20. Identification of organic iodocompounds in the PUREX process with the help of methods for chromatographic separation and spectrometric detection as well as characterization of their behavior during extraction. Final report

    International Nuclear Information System (INIS)

    Gaul, G.; Gibau, F.; Knoechel, A.

    1993-01-01

    In the system HNO 3 KI, Dodecan and TBP the radiolytic reactive behaviour of the described compounds during the dissolution of nuclear fuel elements was simulated. External γ-irradiation gave the best informations. As a consequence of radiolyticly induced reactions several volatile and non-volatile iodoorganic compounds like iodoalkanes, iodonitroalkanes and iodonitroalkylphosphates are formed. They were separated by gaschromatography (GC) and high performance liquid chromatography (HPLC). For HPLC a special photolytic/electrochemical detector with comparable sensitivity like the electroncapture detector in the GC-field was developed. With the help of the two described chromatographic techniques the different iodoorganic compounds could be separated singularily or in groups of isomers. The separation of all compounds demands two-dimensional chromatographies including the capillary-SFC, which was not available for this project. Most of the iodoorganic compounds could be identified by comparison of the retention times of well known compounds. In the other cases, the compounds were studied mass-spectrometrically. Unfortunately all available ionisation techniques (EI; CI; FAB) were too hard for the labile C-I-bond. Therefore an identification of these compounds was not possible. In any case, instructive fingerprint spectra are available enabling relationships between the generation of the iodoorganic compounds and the reaction conditions during their formation. (orig.) [de

  1. Media and the ageing body

    DEFF Research Database (Denmark)

    Givskov, Cecilie; Petersen, Line Nybro

    2018-01-01

    In this introductory article we offer a frame for understanding the relationship between the ageing body and the media as the focus for this special issue. As societies age, issues of representations of old bodies and people’s practices and embodied experiences with media technologies requires...... with this duality: the changing sociocultural conditions for the ageing body and the changing authority of media and its role for the ageing body. Finally, we briefly introduce the articles that are part of the special issue ‘The ageing body and the media’....

  2. Measuring motivations for media exposure: A thesis

    NARCIS (Netherlands)

    Hendriks Vettehen, P.G.J.; Snippenburg, L.B. van

    2002-01-01

    The present article discusses the problem of separating the motivation conceptempirically from other relevant concepts in research on mass media audiences. For about half a century, audience researchers use questionnaire items with adistinct format as measurements of motivations for media exposure.

  3. An efficient Helmholtz solver for acoustic transversely isotropic media

    KAUST Repository

    Wu, Zedong

    2017-11-11

    The acoustic approximation, even for anisotropic media, is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on less medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from S-wave artifacts. Thus, we propose to separate the quasi-P wave propagation in anisotropic media into the elliptic anisotropic operator (free of the artifacts) and the non-elliptic-anisotropic components, which form a pseudo-differential operator. We, then, develop a separable approximation of the dispersion relation of non-elliptic-anisotropic components, specifically for transversely isotropic (TI) media. Finally, we iteratively solve the simpler lower-order elliptical wave equation for a modified source function that includes the non-elliptical terms represented in the Fourier domain. A frequency domain Helmholtz formulation of the approach renders the iterative implementation efficient as the cost is dominated by the Lower-Upper (LU) decomposition of the impedance matrix for the simpler elliptical anisotropic model. Also, the resulting wavefield is free of S-wave artifacts and has balanced amplitude. Numerical examples show that the method is reasonably accurate and efficient.

  4. An efficient Helmholtz solver for acoustic transversely isotropic media

    KAUST Repository

    Wu, Zedong; Alkhalifah, Tariq Ali

    2017-01-01

    The acoustic approximation, even for anisotropic media, is widely used in current industry imaging and inversion algorithms mainly because P-waves constitute the majority of the energy recorded in seismic exploration. The resulting acoustic formulas tend to be simpler, resulting in more efficient implementations, and depend on less medium parameters. However, conventional solutions of the acoustic wave equation with higher-order derivatives suffer from S-wave artifacts. Thus, we propose to separate the quasi-P wave propagation in anisotropic media into the elliptic anisotropic operator (free of the artifacts) and the non-elliptic-anisotropic components, which form a pseudo-differential operator. We, then, develop a separable approximation of the dispersion relation of non-elliptic-anisotropic components, specifically for transversely isotropic (TI) media. Finally, we iteratively solve the simpler lower-order elliptical wave equation for a modified source function that includes the non-elliptical terms represented in the Fourier domain. A frequency domain Helmholtz formulation of the approach renders the iterative implementation efficient as the cost is dominated by the Lower-Upper (LU) decomposition of the impedance matrix for the simpler elliptical anisotropic model. Also, the resulting wavefield is free of S-wave artifacts and has balanced amplitude. Numerical examples show that the method is reasonably accurate and efficient.

  5. Media Training

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    With the LHC starting up soon, the world's media are again turning their attention to CERN. We're all likely to be called upon to explain what is happening at CERN to media, friends and neighbours. The seminar will be given by BBC television news journalists Liz Pike and Nadia Marchant, and will deal with the kind of questions we're likely to be confronted with through the restart period. The training is open for everybody. Make sure you arrive early enough to get a seat - there are only 200 seats in the Globe. The session will also be webcast: http://webcast.cern.ch/

  6. Social Media Sites

    Science.gov (United States)

    Media Sites Site Registration Contact Us Search AF.mil: Home > AF Sites > Social Media Sites Social Media Welcome to the Air Force social media directory! The directory is a one-stop shop of official Air Force social media pages across various social media sites. Social media is all about

  7. Redox speciation of final repository relevant elements using separation methods in combination with ICP mass spectrometry; Redoxspeziation von endlagerrelevanten Elementen mit Hilfe von Trennmethoden gekoppelt an ein Massenspektrometer mit induktiv gekoppeltem Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Graser, Carl-Heinrich

    2015-12-18

    The long-term safety assessment for nuclear waste repositories requires a detailed understanding of the chemistry of actinide elements in the geosphere. The development of advanced analytical tools is required to gain detailed insights into actinide redox speciation in a given system. The mobility of radionuclides is mostly determined by the geochemical conditions which control the redox state of radionuclides. Besides the longlived radionuclides plutonium (Pu) and neptunium (Np), which are key elements in high level nuclear waste, iron (Fe) represents a main component in natural systems controlling redox related geochemical processes. Analytical techniques for determining oxidation state distribution for redox sensitive radionuclides and other metal ions often have a lack of sensitivity. The detection limits of these methods (i.e. UV/vis, TRLFS, XANES) are in general in the range of ≥ 10{sup -6} mol.L{sup -1}. As a consequence ultrasensitive new analytical techniques are required. Capillary electrophoresis (CE) and ion chromatography (IC) are powerful separation methods for metal ions. In the course of this thesis different speciation method for iron, neptunium and plutonium were optimized. With the optimized setup redox speciation analysis of these elements in different samples were done. Furthermore CE hyphenated to inductively coupled plasma sector field mass spectrometry (CE - ICP - SF - MS) was used to measure the redox speciation of Pu (III, IV, V, VI), Np (IV, V, VI) and Fe (II, III) at concentrations lower than 10{sup -7} mol.L{sup -1}. CE coupling and separation parameters such as sample gas pressure, make up flow rate, capillary position, auxiliary gas flow, as well as the electrolyte system were optimized to obtain the maximum sensitivity. The methodes detection limits are 10{sup -12} mol.L{sup -1} for Np and Pu. The various oxidation state species of Pu and Np in different samples were separated by application of an acetate based electrolyte system

  8. Seeds of Cross-Media Production

    DEFF Research Database (Denmark)

    Bødker, Susanne; Petersen, Anja Bechmann

    2007-01-01

    separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... with planning and coordination. We demonstrate how the production rhythms of the individual media collide with that of cross-media, and how product lifecycle rhythms add to the list of causes of problems that may jeopardize crossmedia production. We propose to strengthen planning and overview support elements...

  9. Contrast media

    International Nuclear Information System (INIS)

    Decazes, Ph.

    2004-01-01

    The Guerbet firm, which holds 69% of the capital on the contrast media for medical imagery, could sale about 20% of this capital in order to accelerate its development in the United States, one of its next market with the Japan. (O.M.)

  10. Otitis media

    NARCIS (Netherlands)

    Rovers, MM; Schilder, AGM; Zielhuis, GA; Rosenfeld, RM

    2004-01-01

    Otitis media (OM) continues to be one of the most common childhood infections and is a major cause of morbidity in children. The pathogenesis of OM is multifactorial, involving the adaptive and native immune system, Eustachian-tube dysfunction, viral and bacterial load, and genetic and environmental

  11. Social Media

    Science.gov (United States)

    2010-05-01

    Digital Marketing and Ecommerce Professionals. 29 January 2010. 20 May 2010. <http://econsultancy.com/blog/5324-20+-mind-blowing-social- media...Statistics Revisited.” Econsultancy | Community of Digital Marketing and Ecommerce Professionals. 29 Jan. 2010. 20 May 2010. <http://econsultancy.com/blog

  12. Streaming Media

    Science.gov (United States)

    Pulley, John

    2009-01-01

    At a time when the evolutionary pace of new media resembles the real-time mutation of certain microorganisms, the age-old question of how best to connect with constituents can seem impossibly complex--even for an elite institution plugged into the motherboard of Silicon Valley. Identifying the most effective vehicle for reaching a particular…

  13. Steam-water separator

    International Nuclear Information System (INIS)

    Modrak, T.M.; Curtis, R.W.

    1978-01-01

    The steam-water separator connected downstream of a steam generator consists of a vertical centrifugal separator with swirl blades between two concentric pipes and a cyclone separator located above. The water separated in the cyclone separator is collected in the inner tube of the centrifugal separator which is closed at the bottom. This design allows the overall height of the separator to be reduced. (DG) [de

  14. ITER isotope separation system

    International Nuclear Information System (INIS)

    Busigin, A.; Sood, S.K.; Kveton, O.K.; Sherman, R.H.; Anderson, J.L.

    1990-09-01

    This document presents the results of a study that examined the technical operating and economic viability of an alternative Isotope Separation System (ISS) design based on the distributed design concept. In the distributed design, the ISS is broken up into local independently operable subsystems matched to local processing requirements. The distributed design accepts the same feeds and produces essentially the same products as the reference design. The distributed design consists of two separate, independent subsystems. The first, called ISS-H, receives only protium-dominated streams and waste water from tritium extraction. It has two cryogenic distillation columns and can produce a 50 percent D, 50 percent T product since it lacks D/T separation capability. A final 80 percent T 2 concentration product can be obtained by blending the 50 percent T 2 stream from ISS-H with the more than 99 percent T 2 stream from the second subsystem, ISS-D. The second subsystem receives only deuterium-dominated feeds, which also contain some protium. ISS-D is as complex as the reference design, but smaller. Although each subsystem has some advantages, such as only two cryogenic distillation columns in ISS-H and better than 99 percent steady state T 2 product in ISS-D, the combined subsystems do not offer any real advantage compared to the reference IISS. The entire distributed ISS design has been simulated using Ontario Hydro's FLOSHEET steady state process simulator. Dynamic analysis has not been done for the distributed design. (10 refs., 3 figs., 8 tabs.)

  15. f-Element Ion Chelation in Highly Basic Media

    International Nuclear Information System (INIS)

    Paine, Robert T.

    1999-01-01

    High-level radioactive waste (HLW) generated in the DOE complex is stored in tanks at several sites, but predominantly it is found at the Hanford reservation. Much of the material has been exposed to high pHs, consequently the waste exists in a complex, poorly understood mixture of solids, gels and solutions. The final waste remediation plan may involve chemical separation of fractions and a suitable, well developed molecular chemistry basis for performing these separations is not available. Indeed, the fundamental chemical behavior of most radioactive nuclides in basic media is not known. The goal of this project is to undertake fundamental studies of the coordination chemistry of f-element species in basic aqueous solutions containing common waste treatment ions (e.g., NO3 -, CO3 2-, organic carboxylates, and EDTA), as well as new waste scrubbing chelators produced in this study. The experimental agenda includes: 1. Studies of the speciation of Sr and Ln ions in basic solutions wit h and without common counterions; 2. Preparations of new multifunctional ligands that may act as strong, ion-specific chelators for Sr and/or Ln ions in basic media; and 3. Studies of the coordination and dissolution behavior of oxide-hydroxide species, as well as in insoluble sols, gels, and precipitates in combination with new chelating ligands. It is anticipated that this coordination chemistry will facilitate the design of advanced separation schemes required for handling the complex waste matrices found at the Hanford HLW facility

  16. [Chronic otitis mediaChronic Otitis Media].

    Science.gov (United States)

    Kohles, N; Schulz, T; Eßer, D

    2015-11-01

    There are 2 different kinds of chronic otitis media: Otitis media chronica mesotympanalis and otitis media chronica epitympanalis (cholesteatoma). The incidence of chronic otitis media as reported in literature differs in a wide range. The incidence rates vary between 0.45 and 46%. Both, otitis media chronica mesotympanalis and cholesteatoma, lead to eardrum perforation due to lengthy and recurring inflammations. Furthermore, chronic otitis media is characterized by frequently recurring otorrhea and conductive hearing loss. Georg Thieme Verlag KG Stuttgart · New York.

  17. Light-induced reduction of rhodium(III) and palladium(II) on titanium dioxide dispersions and the selective photochemical separation and recovery of gold(III), platinum(IV), and rhodium(III) in chloride media

    Energy Technology Data Exchange (ETDEWEB)

    Borgarello, E.; Serpone, N.; Emo, G.; Harris, R.; Pelizzetti, E.; Minero, C.

    1986-12-03

    Irradiation of aqueous TiO/sub 2/ dispersions containing palladium(II) or rhodium(III) chloride salts with AM1 simulated sunlight leads to the photoreduction of these metals, which are deposited on the semiconductor particle surface. Oxygen is detrimental to the photoreduction of rhodium(III) but not the photoreduction of palladium(II). However, in both cases the reduction process is most efficient if the solution contains CH/sub 3/OH, which acts to scavenge valence band holes of the illuminated TiO/sub 2/ semiconductor. The selective photoreduction and recovery of precious metals from a dilute solution (as might be found in industrial wastes) have been investigated for a mixture of gold(III), platinum(IV), and rhodium(III) chloride salts as a function of various parameters (pH, presence or absence of O/sub 2/, presence or absence of a hole scavenger, and the concentration of the semiconductor). At pH 0, gold is easily separated from platinum and rhodium. The rate of photoreduction of gold(III) on TiO/sub 2/ is nearly independent of the concentration of the semiconductor, under the experimental conditions employed; the limiting rate is 2.7 x 10/sup -7/ M s/sup -1/. The potential utility of this selective photochemical technique is discussed.

  18. Fictional Separation Logic

    DEFF Research Database (Denmark)

    Jensen, Jonas Buhrkal; Birkedal, Lars

    2012-01-01

    , separation means physical separation. In this paper, we introduce \\emph{fictional separation logic}, which includes more general forms of fictional separating conjunctions P * Q, where "*" does not require physical separation, but may also be used in situations where the memory resources described by P and Q...

  19. On Media Education

    Science.gov (United States)

    Fedorov, Alexander

    2008-01-01

    This monograph analyzes the theory and practice of media education and media literacy. The book also includes the list of Russian media education literature and addresses of websites of the associations for media education.

  20. My three shrinks: Personal stories of social media exploration.

    Science.gov (United States)

    Daviss, Steve; Hanson, Annette; Miller, Dinah

    2015-04-01

    Three psychiatrist authors illustrate the impact of social media on their professional lives by reflecting on personal stories about their experiences with social media. They reflect on their experiences with listservs, chat rooms, online forums, blogs, podcasts, and other interactive media, while recounting actual stories involving those media. The impact of social media on professional advocacy across broad populations is addressed. In addition, the use of social media in educating psychiatric trainees and informing forensic evaluations is discussed. Finally, social media as a tool for enhancing consumer advocacy and addressing controversial patient safety procedures in emergency settings is discussed.

  1. Otitis media.

    Science.gov (United States)

    Schilder, Anne G M; Chonmaitree, Tasnee; Cripps, Allan W; Rosenfeld, Richard M; Casselbrant, Margaretha L; Haggard, Mark P; Venekamp, Roderick P

    2016-09-08

    Otitis media (OM) or middle ear inflammation is a spectrum of diseases, including acute otitis media (AOM), otitis media with effusion (OME; 'glue ear') and chronic suppurative otitis media (CSOM). OM is among the most common diseases in young children worldwide. Although OM may resolve spontaneously without complications, it can be associated with hearing loss and life-long sequelae. In developing countries, CSOM is a leading cause of hearing loss. OM can be of bacterial or viral origin; during 'colds', viruses can ascend through the Eustachian tube to the middle ear and pave the way for bacterial otopathogens that reside in the nasopharynx. Diagnosis depends on typical signs and symptoms, such as acute ear pain and bulging of the tympanic membrane (eardrum) for AOM and hearing loss for OME; diagnostic modalities include (pneumatic) otoscopy, tympanometry and audiometry. Symptomatic management of ear pain and fever is the mainstay of AOM treatment, reserving antibiotics for children with severe, persistent or recurrent infections. Management of OME largely consists of watchful waiting, with ventilation (tympanostomy) tubes primarily for children with chronic effusions and hearing loss, developmental delays or learning difficulties. The role of hearing aids to alleviate symptoms of hearing loss in the management of OME needs further study. Insertion of ventilation tubes and adenoidectomy are common operations for recurrent AOM to prevent recurrences, but their effectiveness is still debated. Despite reports of a decline in the incidence of OM over the past decade, attributed to the implementation of clinical guidelines that promote accurate diagnosis and judicious use of antibiotics and to pneumococcal conjugate vaccination, OM continues to be a leading cause for medical consultation, antibiotic prescription and surgery in high-income countries.

  2. Separation Anxiety (For Parents)

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español Separation Anxiety KidsHealth / For Parents / Separation Anxiety What's in this ... both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. Parents ...

  3. Media matters.

    Science.gov (United States)

    Martinez, L M

    1995-01-01

    The impact of the mass media on woman's status was addressed at two 1995 conferences: the Fourth World Conference on Women, held in Beijing, China, and the Congress of the World Association for Christian Communication, held in Puebla, Mexico. The globalization process facilitated by the mass media has served to increase the power of patriarchy, with no advantages to the cause of women's rights. Coverage of popular movements has been suppressed out of deference to male-controlled governments. Coverage of the Beijing Conference highlighted celebrities and personal stories, to the exclusion of the economic and political issues under debate. Television has commodified women, reinforcing their oppression. On the other hand, the alternative media, which tend to be decentralized, democratic, low-cost, and low in technology, are presenting women as subjects rather than objects and deconstructing gender stereotypes. Of concern, however, is the tendency of computer technology to widen the gap between social classes and developed and developing countries. Women must use information networks to disseminate information on women's rights and strengthen the links between women throughout the world.

  4. Media Education Initiatives by Media Organizations: The Uses of Media Literacy in Hong Kong Media

    Science.gov (United States)

    Chu, Donna; Lee, Alice Y. L.

    2014-01-01

    As more media organizations have engaged in media education, this paper investigates the goals and practices of these activities. This article coins media education initiatives by media organizations with the term "media-organization media literac"y (MOML). Four MOML projects in Hong Kong were selected for examination. Built on critical…

  5. New separation technique. Catalytically functionated separation membrane

    Energy Technology Data Exchange (ETDEWEB)

    Urgami, Tadashi [Kansai Univ., Osaka (Japan)

    1989-02-01

    This report introduces research examples, showing the fundamental principle of the membrane by separating the catalytically functionated separation membrane into enzyme fixing separation membrane, polymerized metal complex separation membrane and polymer catalyst separation membrane. This membrane can achieve both functions of separation and catalytic reaction simultaneously and has sufficient possibility to combine powerful functions. Enzyme fixing separation membrane is prepared by carrier combination method, bridging method or covering method and the enzyme fixing method with polymerized complex in which enzyme is controlled to prevent the activity lowering as much as possible and enzyme is fixed from an aqueous solution into polymer membrane. This membrane is applied to the continuous manufacturing of invert sugar from cane sugar and adsorption and removing of harmful substances from blood by utilizing both micro-capsuled urease and active carbon. Alginic acid-copper (II) complex membrane is used for the polymerized metal complex membrane and polystyrene sulfonate membrane is used for the polymer catalyst separation membrane. 28 refs., 4 figs., 1 tabs.

  6. THE IMPACT OF MASS MEDIA ON CHILDREN

    Directory of Open Access Journals (Sweden)

    Maria Katarzyna Grzegorzewska

    2008-01-01

    Full Text Available The 21th century from the standpoint of man is regarded as a time of domestication of new media technologies. During that era audiovisual media have displayed the traditional media. Written word has lost is place to television, video games, and in the Internet, whichare having a major impact on people of all ages including young children. The word “illusion” originates from the Latin word “illusio” which means to pretend, to elude. The media world has become independent in terms of the real word and started tolive according to its own rules. We have started to function in two separate realities: actual reality, and virtual media reality. For some people it is very hard to distinguish two types of realities, not to mention kids, which usually perceive media reality as entirely real, actual domain.

  7. Controlling Separation in Turbomachines

    Science.gov (United States)

    Evans, Simon; Himmel, Christoph; Power, Bronwyn; Wakelam, Christian; Xu, Liping; Hynes, Tom; Hodson, Howard

    2010-01-01

    Four examples of flow control: 1) Passive control of LP turbine blades (Laminar separation control). 2) Aspiration of a conventional axial compressor blade (Turbulent separation control). 3) Compressor blade designed for aspiration (Turbulent separation control). 4.Control of intakes in crosswinds (Turbulent separation control).

  8. Media Matter

    Directory of Open Access Journals (Sweden)

    Holger Pötzsch

    2017-02-01

    Full Text Available The present contribution maps materialist advances in media studies. Based on the assumption that matter and materiality constitute significant aspects of communication processes and practices, I introduce four fields of inquiry - technology, political economy, ecology, and the body - and argue that these perspectives enable a more comprehensive understanding of the implications of contemporary technologically afforded forms of interaction. The article shows how each perspective can balance apologetic and apocalyptic approaches to the impact of in particular digital technologies, before it demonstrates the applicability of an integrated framework with reference to the techno-politics of NSA surveillance and the counter-practices of WikiLeaks.

  9. Media education and media influence on youth

    OpenAIRE

    LILÁK, Karel

    2011-01-01

    Bachelor´s work is focused on the questions of the medial education and the medias themselves. This work also investigate with the influence of the action of medias to the students of apprenticeship. The first part of the theoretical work has generally explains what is media education, what is its significance for society and for the benefit of education in school. They are given functions, types and objectives of media education and communications capabilities via the media. The second part ...

  10. Microcellular foams via phase separation

    International Nuclear Information System (INIS)

    Young, A.T.

    1985-01-01

    A study of wide variety of processes for making plastic foams shows that phase separation processes for polymers from solutions offers the most viable methods for obtaining rigid plastic foams which met the physical requirements for fusion target designs. Four general phase separation methods have been shown to give polymer foams with densities less than 0.1 g/cm 3 and cell sizes of 30μm or less. These methods involve the utilization of non-solvent, chemical or thermal cooling processes to achieve a controlled phase separation wherein either two distinct phases are obtained where the polymer phase is a continuous phase or two bicontinuous phases are obtained where both the polymer and solvent are interpenetrating, continuous, labyrinthine phases. Subsequent removal of the solvent gives the final foam structure

  11. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

    2015-01-12

    This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

  12. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    DeTar, Carleton [P.I.

    2012-12-10

    This document constitutes the Final Report for award DE-FC02-06ER41446 as required by the Office of Science. It summarizes accomplishments and provides copies of scientific publications with significant contribution from this award.

  13. Monodisperse Multidimensional Nanostructures via Centrifugal Separation

    Science.gov (United States)

    Shin, Yu Jin

    Anisotropic nanomaterials, including zero-dimensional metallic nanoparticles (MNPs), one-dimensional single-walled carbon nanotubes (SWCNTs), and two-dimensional few-layer black phosphorous (FL-P) exhibit interesting structure-dependent properties that could be exploited in biomedicine, plasmonics, and optoelectronics. In this thesis, centrifugation sorting of these nanomaterials is utilized for structure refinement, investigation of structure-dependent optical response, and applications in biomedical imaging and plasmonics. Nobel NMPs show unique shape- and size-dependent optical properties. Controlled synthetic methods are developed to manipulate the structure of these NMPs, but intrinsically produce dispersions of polydisperse NPs with various shape and size, and synthetic byproducts. Here, we describe a facile strategy for separating small (edge length 80%) and subsequently achieve a 2.5 fold enhancement in refractive index sensitivity, comparable to the unsorted mixture. This shallow DGC approach is robust and reliable, and therefore can be applied to other metal nanostructures for concomitant improvements in plasmonic properties and applications. Using the identical separation strategy in the previous study, we are able to enrich gold nanostars as a function of branch number. In particular, we explore different variants of density gradient media to ensure compatibility with the star shape and colloid stability. We determine that sucrose is compatible with nanostars stability and surface functionalizaton. The refined population of gold stars are functionalized with Gd(III)-DNA to act as MRI contrast agents, and thus enables us to investigate how populations of nanostars with different branch numbers contribute to the relaxivity of surface bound Gd(III)-DNA. It is shown that the increased relaxivity of DNA-Gd star is correlated with increased number of star branches, not with increased size of the stars. Therefore, shape is a new parameter which can be tuned in

  14. The Role of Media Coverage in Meeting Operational Objectives

    National Research Council Canada - National Science Library

    Mitchell-Musumarra, Mary

    2003-01-01

    ...: Operation Desert Storm, Operation Restore Hope (Somalia) and Operation Iraqi Freedom. It describes some of the motivations and concerns of the news media, and examines doctrine from the perspective of the media's requirements for information. Finally, recommendations are made to improve future media coverage of operations.

  15. Managing Media: Segmenting Media Through Consumer Expectancies

    Directory of Open Access Journals (Sweden)

    Matt Eastin

    2014-04-01

    Full Text Available It has long been understood that consumers are motivated to media differently. However, given the lack of comparative model analysis, this assumption is without empirical validation, and thus, the orientation of segmentation from a media management perspective is without motivational grounds. Thus, evolving the literature on media consumption, the current study develops and compares models of media segmentation within the context of use. From this study, six models of media expectancies were constructed so that motivational differences between media (i.e., local and national newspapers, network and cable television, radio, and Internet could be observed. Utilizing higher order statistical analyses the data indicates differences across a model comparison approach for media motivations. Furthermore, these differences vary across numerous demographic factors. Results afford theoretical advancement within the literature of consumer media consumption as well as provide media planners’ insight into consumer choices.

  16. Separation of Tritium from Wastewater

    International Nuclear Information System (INIS)

    JEPPSON, D.W.

    2000-01-01

    A proprietary tritium loading bed developed by Molecular Separations, Inc (MSI) has been shown to selectively load tritiated water as waters of hydration at near ambient temperatures. Tests conducted with a 126 (micro)C 1 tritium/liter water standard mixture showed reductions to 25 (micro)C 1 /L utilizing two, 2-meter long columns in series. Demonstration tests with Hanford Site wastewater samples indicate an approximate tritium concentration reduction from 0.3 (micro)C 1 /L to 0.07 (micro)C 1 /L for a series of two, 2-meter long stationary column beds Further reduction to less than 0.02 (micro)C 1 /L, the current drinking water maximum contaminant level (MCL), is projected with additional bed media in series. Tritium can be removed from the loaded beds with a modest temperature increase and the beds can be reused Results of initial tests are presented and a moving bed process for treating large quantities of wastewaters is proposed. The moving bed separation process appears promising to treat existing large quantities of wastewater at various US Department of Energy (DOE) sites. The enriched tritium stream can be grouted for waste disposition. The separations system has also been shown to reduce tritium concentrations in nuclear reactor cooling water to levels that allow reuse. Energy requirements to reconstitute the loading beds and waste disposal costs for this process appear modest

  17. Narrative Finality

    Directory of Open Access Journals (Sweden)

    Armine Kotin Mortimer

    1981-01-01

    Full Text Available The cloturai device of narration as salvation represents the lack of finality in three novels. In De Beauvoir's Tous les hommes sont mortels an immortal character turns his story to account, but the novel makes a mockery of the historical sense by which men define themselves. In the closing pages of Butor's La Modification , the hero plans to write a book to save himself. Through the thrice-considered portrayal of the Paris-Rome relationship, the ending shows the reader how to bring about closure, but this collective critique written by readers will always be a future book. Simon's La Bataille de Pharsale , the most radical attempt to destroy finality, is an infinite text. No new text can be written. This extreme of perversion guarantees bliss (jouissance . If the ending of De Beauvoir's novel transfers the burden of non-final world onto a new victim, Butor's non-finality lies in the deferral to a future writing, while Simon's writer is stuck in a writing loop, in which writing has become its own end and hence can have no end. The deconstructive and tragic form of contemporary novels proclaims the loss of belief in a finality inherent in the written text, to the profit of writing itself.

  18. Geographic Media Literacy

    Science.gov (United States)

    Lukinbeal, Chris

    2014-01-01

    While the use of media permeates geographic research and pedagogic practice, the underlying literacies that link geography and media remain uncharted. This article argues that geographic media literacy incorporates visual literacy, information technology literacy, information literacy, and media literacy. Geographic media literacy is the ability…

  19. Adolescents and media literacy.

    Science.gov (United States)

    McCannon, Robert

    2005-06-01

    In the face of media industry consolidation, fewer people control media content which makes it harder for parents and citizens to know the research about media-related issues, such as video game violence, nutrition, and sexual risk-taking. Media literacy offers a popular and potentially successful way to counter the misinformation that is spread by Big Media public relations.

  20. Safety in online media – freedom of the media; safety of media actors and media education

    OpenAIRE

    Moeller, Ch

    2013-01-01

    In this paper, prepared for the international conference ‘Mass Media – Society – Education: Media Safety Problems’ at the Chelyabinsk State University’s Department for Journalism and Media Education from September 30 – October 3, 2013, I would like to address three dimensions of media safety and security in online media.

  1. SOCIAL MEDIA SECURITY

    Science.gov (United States)

    RESPONSIBILITY CENTCOM COALITION MEDIA SOCIAL MEDIA NEWS ARTICLES PRESS RELEASES IMAGERY VIDEOS TRANSCRIPTS VISITORS AND PERSONNEL FAMILY CENTER FAMILY READINESS CENTCOM WEBMAIL SOCIAL MEDIA SECURITY ACCOUNTABILITY HomeVISITORS AND PERSONNELSOCIAL MEDIA SECURITY FAQ on Security for Social Media Due to the widespread use of

  2. Measuring News Media Literacy

    Science.gov (United States)

    Maksl, Adam; Ashley, Seth; Craft, Stephanie

    2015-01-01

    News media literacy refers to the knowledge and motivations needed to identify and engage with journalism. This study measured levels of news media literacy among 500 teenagers using a new scale measure based on Potter's model of media literacy and adapted to news media specifically. The adapted model posits that news media literate individuals…

  3. Editorial: Pedagogical Media Ecologies

    Directory of Open Access Journals (Sweden)

    Dorothee M. Meister

    2014-07-01

    (data projector to lecture capture media– have not rendered the lecture obsolete, but have instead foregrounded its performative aspects and its ongoing adaptability. Michael Kerres and Richard Heinen take as their starting point Deimann’s, Hug’s and Friesen’s stress on the manifold possibilities presented digital and open educational resources. They then seek to answer the question: How can this embarrassment of riches be put to good use in K-12 educational contexts? Their answer: «Edutags», a way of making resources more accessible and usable by providing descriptive and evaluative information along with such resources. Heinz Moser and Thomas Hermann present the concept and first results of the project «Visualized Vocational Aspirations: Potentials of photography for career counselling and vocational preparation».5 The research project is a cooperation between the Zurich University of Teacher Education (Pädagogische Hochschule Zürich and the «Laufbahnzentrum» (Centre of Vocational Counselling Zürich. Based on an ecological approach of narrative career education and a design-based research methodology the undertaking aims at creative applications of visual storytelling in career counselling. Rainer Leschke and Norm Friesen conclude the issue with what might be called an aesthetic- or formal-ecological perspective. The digital convergence of textual and other media forms, Leschke and Friesen maintain, means the erasure of formal and material distinctions traditionally embedded in separate media. Educational (and other institutions have oriented long themselves on the basis of such distinctions; and what is now left are distinctions based only on recombinant, virtual aesthetic markers. ——————————— The exceptions are the papers by Rainer Leschke and Norm Friesen, Michael Kerres and Richard Heinen, and Theo Hug. See: http://kw.uni-paderborn.de/institute-einrichtungen/mewi/arbeitsschwerpunkte/prof-dr-dorothee-m-meister/tagungen/educational-media

  4. Cardiopulmonary resuscitation and contrast media reactions in a radiology department

    International Nuclear Information System (INIS)

    O'Neill, John M.; McBride, Kieran D.

    2001-01-01

    AIM: To assess current knowledge and training in the management of contrast media reactions and cardiopulmonary resuscitation within a radiology department. MATERIALS AND METHODS: The standard of knowledge about the management of contrast media reactions and cardiopulmonary resuscitation among radiologists, radiographers and nurses were audited using a two-section questionnaire. Our results were compared against nationally accepted standards. Repeat audits were undertaken over a 28-month period. Three full audit cycles were completed. RESULTS: The initial audit confirmed that although a voluntary training programme was in place, knowledge of cardiopulmonary resuscitation techniques were below acceptable levels (set at 70%) for all staff members. The mean score for radiologists was 50%. Immediate changes instituted included retraining courses, the distribution of standard guidelines and the composition and distribution of two separate information handouts. Initial improvements were complemented by new wallcharts, which were distributed throughout the department, a series of lectures on management of contrast reactions and regular reviews with feedback to staff. In the third and final audit all staff groups had surpassed the required standard. CONCLUSION: Knowledge of contrast media reactions and resuscitation needs constant updating. Revision of skills requires a prescriptive programme; visual display of advice is a constant reminder. It is our contention all radiology departmental staff should consider it a personal duty to maintain their resuscitation skills at appropriate standards. O'Neill, J.M., McBride, K.D.(2001). Clinical Radiology 00, 000-000

  5. Cardiopulmonary resuscitation and contrast media reactions in a radiology department

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, John M.; McBride, Kieran D

    2001-04-01

    AIM: To assess current knowledge and training in the management of contrast media reactions and cardiopulmonary resuscitation within a radiology department. MATERIALS AND METHODS: The standard of knowledge about the management of contrast media reactions and cardiopulmonary resuscitation among radiologists, radiographers and nurses were audited using a two-section questionnaire. Our results were compared against nationally accepted standards. Repeat audits were undertaken over a 28-month period. Three full audit cycles were completed. RESULTS: The initial audit confirmed that although a voluntary training programme was in place, knowledge of cardiopulmonary resuscitation techniques were below acceptable levels (set at 70%) for all staff members. The mean score for radiologists was 50%. Immediate changes instituted included retraining courses, the distribution of standard guidelines and the composition and distribution of two separate information handouts. Initial improvements were complemented by new wallcharts, which were distributed throughout the department, a series of lectures on management of contrast reactions and regular reviews with feedback to staff. In the third and final audit all staff groups had surpassed the required standard. CONCLUSION: Knowledge of contrast media reactions and resuscitation needs constant updating. Revision of skills requires a prescriptive programme; visual display of advice is a constant reminder. It is our contention all radiology departmental staff should consider it a personal duty to maintain their resuscitation skills at appropriate standards. O'Neill, J.M., McBride, K.D.(2001). Clinical Radiology 00, 000-000.

  6. Life Cycle Assessment of different uses of biogas from anaerobic digestion of separately collected biodegradable waste in France. Final report; Analyse du Cycle de Vie des modes de valorisation energetique du biogaz issu de methanisation de la Fraction Fermentescible des Ordures Menageres collectee selectivement en France. Rapport Final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    In the first part of the study, Gaz de France (GdF) and the French Environment Energy Management Agency (ADEME) wished to identify the best method to use the biogas from anaerobic digestion of separately collected biodegradable waste (bio-waste). Secondly, GdF and ADEME wished to evaluate the strength and weaknesses of the two main different organic recycling: anaerobic digestion (methanization) and composting. The study is based on the life cycle assessment method. The life cycle assessment used for this study consists in quantifying the environmental impacts of all of the activities which are related to the chosen use method. This methodology involves compiling a detailed account of all substances and energy flows removed or emitted from or into the environment at each stage of the life cycle. These flows are then translated into indicators of potential environment impacts. This methodology is based on the international standards ISO14040 and ISO 14044. The life cycle assessment was performed by RDC Environnement. In this study, two questions were treated: - Which is the best valorisation method for biogas produced from the anaerobic digestion of separately collected biodegradable waste: fuel, heat or electricity? ('Biogas' question); - Which is the best treatment for the separately collected biodegradable waste: anaerobic digestion (methanization) or industrial composting? ('Composting' question). The field of the study includes the arrival of the separately collected biodegradable waste at the anaerobic unit as well as the utilisation of the biogas energy and the agricultural use of the digestate from anaerobic digestion. For each biogas utilisation, the environmental impacts of each life cycle stage were considered as well as the impacts that were avoided due to the substitution of the use of non-renewable energy ('conventional' procedures). The modelling of the direct composting of the biodegradable waste was realised taking into

  7. Media Literacy in Times of Media Divides

    Directory of Open Access Journals (Sweden)

    Kaja Žuran

    2013-12-01

    Full Text Available We live in a post-modern society, an information society, a society based around knowledge and participation, and above all in a media society. In a media culture where media holds a dominant position, we cannot overlook the emerging idea of a ‘media divide’ within the frame of media education, media literate individuals and the expansion of the traditional concept of media literacy. Firstly, we are in an era of technological revolution, and it is time to consider the meaning and function of media and how we experience it in our everyday life. Secondly, as a society we are subject to intense media invasion and we all need to learn how to use it to our benefit and apply a critical and autonomous perspective towards selecting media content. Otherwise the media divide between the media literate and illiterate will widen; but is there even a chance to overcome the supposed divide between those who are formally media educated and those who are not?

  8. Polymethacrylate-based monoliths as stationary phases for separation of biopolymers and immobilization of enzymes.

    Science.gov (United States)

    Martinović, Tamara; Josić, Djuro

    2017-11-01

    The experiences in the production and application of polymethacrylate-based monolithic supports, since their development almost thirty years ago, are presented. The main driving force for the development of new chromatographic supports was the necessity for the isolation and separation of physiologically active biopolymers and their use for therapeutic purposes. For this sake, a development of a method for fast separation, preventing denaturation and preserving their biological activity was necessary. Development of polysaccharide-based supports, followed by the introduction of polymer-based chromatographic media, is shortly described. This development was followed by the advances in monolithic media that are now used for both large- and small-scale separation of biopolymers and nanoparticles. Finally, a short overview is given about the applications of monoliths for sample displacement chromatography, resulting in isolation of physiologically active biomolecules, such as proteins, protein complexes, and nucleic acid, as well as high-throughput sample preparation for proteomic investigations. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Magnetic separation of algae

    Science.gov (United States)

    Nath, Pulak; Twary, Scott N.

    2016-04-26

    Described herein are methods and systems for harvesting, collecting, separating and/or dewatering algae using iron based salts combined with a magnetic field gradient to separate algae from an aqueous solution.

  10. Separation anxiety in children

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/001542.htm Separation anxiety in children To use the sharing features on this page, please enable JavaScript. Separation anxiety in children is a developmental stage in which ...

  11. Chromatographic separations of stereoisomers

    Energy Technology Data Exchange (ETDEWEB)

    Souter, R.W.

    1985-01-01

    This text covers both diastereomers and enantiomers; describes techniques for GC, HPLC, and other chromatographic methods; and tabulates results of various applications by both techniques and compound class. It provides current knowledge about separation mechanisms and interactions of asymmetric molecules, as well as experimental and commercial materials such as columns, instruments, and derivatization reagents. The contents also include stereoisomer separations by gas chromatography. Stereoisomer separations by high-performance liquid chromatography. Stereoisomer separations by other chromatographic techniques.

  12. Final Report

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Nielsen, Peter V.

    This final report for the Hybrid Ventilation Centre at Aalborg University describes the activities and research achievement in the project period from August 2001 to August 2006. The report summarises the work performed and the results achieved with reference to articles and reports published...

  13. Otitis media with effusion

    Science.gov (United States)

    OME; Secretory otitis media; Serous otitis media; Silent otitis media; Silent ear infection; Glue ear ... from the tube and is swallowed. OME and ear infections are connected in two ways: After most ear ...

  14. Fission-Product Separation as a Final Solution to the Problem of Storing Highly Radioactive Waste; La Separation des Produits de Fission Comme Solution Definitive du Stockage des Dechets Fortement Radioactifs; 0412 042b 0414 ; La Separacion de los Productos de Fision Como Solucion Definitiva del Problema del Almacenamiento de los Desechos de Elevada Radiactividad

    Energy Technology Data Exchange (ETDEWEB)

    Raggenbass, A.; Lefevre, J. [Centre d' Etudes Nucleaires, Saclay (France)

    1963-02-15

    At the 1955 Geneva Conference; it was suggested by Glueckauf that the problems presented by solutions of concentrated fission products could be dealt with by isolating caesium-137 and strontium-90 with a decontamination factor of at least 10{sup 4} so that, after conventional effluent processing, disposal could be effected in 10 to 20 years' time. This paper considers the suggestion in the light of the present situation. Thanks to the progress made in methods of separating caesium and strontium it now seems feasible to obtain this factor of 10{sup 4} under industrial conditions. The following methods are very promising: (a) For caesium-137: precipitation by phosphotungstic acid, exchange using an ammonium salt of a heteropoly-acid, fixation using a zirconium phosphate and (b) For strontium-90: oxalate precipitation, extraction by di-2 ethyl hexylphosphoric acid, exchange using various salts, strontium sulphate, etc. This progress in chemical techniques, backed up by advances in the industrial processing of effluents, indicate that Glueckauf's proposal is technically possible. In addition, the increasing use of large quantities of fission products, particularly in the SNAP programmes, justifies the outlay of capital, which will be recovered at least in part by the sale of the products made. There is no doubt that refractory sources with a very high resistance to attack by all external agents, constitute the most satisfactory means of storage for products so dangerous and of such long half-life. We believe, therefore, that both technically and psychologically, storing by means of concentrated sources with strong cladding is the most reliable method. A comparison of this method with that of fixation in glass is worthy of full and detailed examination. (author) [French] Glueckauf avait formule, a la Conference de Geneve en 1955, l'hypothese qu'une solution definitive aux problemes poses par les solutions de produits de fission concentres pouvait etre trouvee dans l

  15. Methods of using adsorption media for separating or removing constituents

    Science.gov (United States)

    Tranter, Troy J [Idaho Falls, ID; Herbst, R Scott [Idaho Falls, ID; Mann, Nicholas R [Blackfoot, ID; Todd, Terry A [Aberdeen, ID

    2011-10-25

    Methods of using an adsorption medium to remove at least one constituent from a feed stream. The method comprises contacting an adsorption medium with a feed stream comprising at least one constituent and removing the at least one constituent from the feed stream. The adsorption medium comprises a polyacrylonitrile (PAN) matrix and at least one metal hydroxide homogenously dispersed therein. The adsorption medium may comprise from approximately 15 wt % to approximately 90 wt % of the PAN and from approximately 10 wt % to approximately 85 wt % of the at least one metal hydroxide. The at least one metal hydroxide may be selected from the group consisting of ferric hydroxide, zirconium hydroxide, lanthanum hydroxide, cerium hydroxide, titanium hydroxide, copper hydroxide, antimony hydroxide, and molybdenum hydroxide.

  16. Designing and Testing an Inventory for Measuring Social Media Competency of Certified Health Education Specialists.

    Science.gov (United States)

    Alber, Julia M; Bernhardt, Jay M; Stellefson, Michael; Weiler, Robert M; Anderson-Lewis, Charkarra; Miller, M David; MacInnes, Jann

    2015-09-23

    Social media can promote healthy behaviors by facilitating engagement and collaboration among health professionals and the public. Thus, social media is quickly becoming a vital tool for health promotion. While guidelines and trainings exist for public health professionals, there are currently no standardized measures to assess individual social media competency among Certified Health Education Specialists (CHES) and Master Certified Health Education Specialists (MCHES). The aim of this study was to design, develop, and test the Social Media Competency Inventory (SMCI) for CHES and MCHES. The SMCI was designed in three sequential phases: (1) Conceptualization and Domain Specifications, (2) Item Development, and (3) Inventory Testing and Finalization. Phase 1 consisted of a literature review, concept operationalization, and expert reviews. Phase 2 involved an expert panel (n=4) review, think-aloud sessions with a small representative sample of CHES/MCHES (n=10), a pilot test (n=36), and classical test theory analyses to develop the initial version of the SMCI. Phase 3 included a field test of the SMCI with a random sample of CHES and MCHES (n=353), factor and Rasch analyses, and development of SMCI administration and interpretation guidelines. Six constructs adapted from the unified theory of acceptance and use of technology and the integrated behavioral model were identified for assessing social media competency: (1) Social Media Self-Efficacy, (2) Social Media Experience, (3) Effort Expectancy, (4) Performance Expectancy, (5) Facilitating Conditions, and (6) Social Influence. The initial item pool included 148 items. After the pilot test, 16 items were removed or revised because of low item discrimination (r.90), or based on feedback received from pilot participants. During the psychometric analysis of the field test data, 52 items were removed due to low discrimination, evidence of content redundancy, low R-squared value, or poor item infit or outfit

  17. Wide angle isotope separator

    International Nuclear Information System (INIS)

    Kantrowitz, A.

    1976-01-01

    A method and apparatus is described for particle separation. The method uses a wide angle radially expanding vapor of a particle mixture. In particular, selective ionization of one isotope type in the particle mixture is produced in a multichamber separator and the ionized isotope type is accelerated out of the path of the vapor expansion for separate collection

  18. Steam-water separator

    International Nuclear Information System (INIS)

    Modrak, T.M.; Curtis, R.W.

    1978-01-01

    A two-stage steam-water separating device is introduced, where the second stage is made as a cyclone separator. The water separated here is collected in the first stage of the inner tube and is returned to the steam raising unit. (TK) [de

  19. Meniscus Membranes For Separation

    Science.gov (United States)

    Dye, Robert C.; Jorgensen, Betty; Pesiri, David R.

    2005-09-20

    Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

  20. Meniscus membranes for separations

    Science.gov (United States)

    Dye, Robert C [Irvine, CA; Jorgensen, Betty [Jemez Springs, NM; Pesiri, David R [Aliso Viejo, CA

    2004-01-27

    Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

  1. How Media Companies Should Create Value: Innovation Centered Business Models and Dynamic Capabilities

    NARCIS (Netherlands)

    Kranenburg, H.L. van; Ziggers, G.W.; Friedrichsen, M.; Mühl-Benninghaus, W.; Picard, R.; Vartanova, E.

    2014-01-01

    Globalization, deregulation, technological innovation and the convergence of previously separated industries such as media, entertainment, information, and consumer electronics industries, have changed the media landscape into a turbulent environment. As a consequence of these developments, many

  2. Intermediality and media change

    OpenAIRE

    2012-01-01

    This book is about intermediality as an approach to analysing and understanding media change. Intermediality and Media Change is critical of technological determinism that characterises 'new media discourse' about the ongoing digitalization, framed as a revolution and creating sharp contrasts between old and new media. Intermediality instead emphasises paying attention to continuities between media of all types and privileges a comparative perspective on technological changes in media over ti...

  3. Media Pembelajaran Global Warming

    OpenAIRE

    Tham, Fikri Jufri; Liliana, Liliana; Purba, Kristo Radion

    2016-01-01

    Computer based learning media is one of the media has an important role in learning. Learning media will be attractive when packaged through interactive media , such as interactive media created in paper manufacture " instructional media global warming" . The advantage gained is that it can increase knowledge, generally educate people to be more concerned about the environment , and also can be a means of entertainment. This application is focused to learn about global warming and packaged in...

  4. Separation of technetium from nuclear waste stream simulants. Final report

    International Nuclear Information System (INIS)

    Strauss, S.H.

    1995-01-01

    The author studied liquid anion exchangers, such as Aliquat-336 nitrate, various pyridinium nitrates, and related salts, so that they may be applied toward a specific process for extracting (partitioning) and recovering 99 TcO 4 - from nuclear waste streams. Many of the waste streams are caustic and contain a variety of other ions. For this reason, the author studied waste stream simulants that are caustic and contain appropriate concentrations of selected, relevant ions. Methods of measuring the performance of the exchangers and extractant systems included contact experiments. Batch contact experiments were used to determine the forward and reverse extraction parameters as a function of temperature, contact time, phase ratio, concentration, solvent (diluent), and other physical properties. They were also used for stability and competition studies. Specifically, the author investigated the solvent extraction behavior of salts of perrhenate (ReO 4 - ), a stable (non-radioactive) chemical surrogate for 99 TcO 4 - . Results are discussed for alternate organic solvents; metalloporphyrins, ferrocenes, and N-cetyl pyridium nitrate as alternate extractant salts; electroactive polymers; and recovery of ReO 4 - and TcO 4 -

  5. Separation of technetium from nuclear waste stream simulants. Final report

    International Nuclear Information System (INIS)

    Strauss, S.H.

    1994-01-01

    The authors evaluated several calorimetric assays for ReO 4 - , and discovered that all were flawed. They evaluated atomic absorption spectroscopy as a technique to determine sub-millimolar concentrations of ReO 4 - , and discovered that it is not sensitive enough for their use. However, they discovered that ICP-AES can be used to determine concentrations of ReO 4 - down to 0.25 ppm. They next determined that ReO 4 - can be quickly extracted (10 minutes or less) from aqueous HNO 3 using the commercial extractant Aliquat-336 nitrate diluted with 1,3-diisopropylbenzene. Higher concentrations of extractant led to higher values of K d (the distribution ratio). K d was lower as the nitrate concentration of the medium increased, and was also lowered by increasing the acidity at constant nitrate ion concentration. The authors performed parallel studies with TcO 4 - , determining that K d (ReO 4 - ) and K d (TcO 4 - ) track similarly as the conditions are changed. An effort was made to prepare substituted pyridium nitrate salts that are soluble in organic solvents to be used as alternate extractants. However, in all cases but one, the salts were also soluble to some extent in the aqueous phase, significantly limiting their usefulness as extractants for these purposes. Many of the new extractant salts would partition between the organic solvent and water so that 10% of the extractant salt was in the aqueous phase. Only 1-methyl-3,5-didodecylpyridium nitrate did not show any measurable solubility in water. However, this compound was not as good an extractant as Aliquat-336. A considerable effort was also made to find suitable alternative solvents to 1,3-diisopropylbenzene. Several ketone solvents with flash points above 60 C were tested, and two of these, 2-nonanone and 3-nonanone, were superior to 1,3-diisopropylbenzene as a diluent

  6. Ultrafiltration concept for separating oil from water. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Goldsmith, R.L.; Schrab H.

    1973-01-01

    Discharge of oily wastes from shipboard operations of deballasting, bilge pumping, and slop tank cleaning constitutes a serious water pollution problem. Membrane ultrafiltration was studied in this project as a means of generating a highly purified water from a variety of oily wastes.

  7. Separation of technetium from nuclear waste stream simulants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, S.H. [Colorado State Univ., Fort Collins, CO (United States). Dept. of Chemistry

    1995-09-11

    The author studied liquid anion exchangers, such as Aliquat-336 nitrate, various pyridinium nitrates, and related salts, so that they may be applied toward a specific process for extracting (partitioning) and recovering {sup 99}TcO{sub 4}{sup {minus}} from nuclear waste streams. Many of the waste streams are caustic and contain a variety of other ions. For this reason, the author studied waste stream simulants that are caustic and contain appropriate concentrations of selected, relevant ions. Methods of measuring the performance of the exchangers and extractant systems included contact experiments. Batch contact experiments were used to determine the forward and reverse extraction parameters as a function of temperature, contact time, phase ratio, concentration, solvent (diluent), and other physical properties. They were also used for stability and competition studies. Specifically, the author investigated the solvent extraction behavior of salts of perrhenate (ReO{sub 4}{sup {minus}}), a stable (non-radioactive) chemical surrogate for {sup 99}TcO{sub 4}{sup {minus}}. Results are discussed for alternate organic solvents; metalloporphyrins, ferrocenes, and N-cetyl pyridium nitrate as alternate extractant salts; electroactive polymers; and recovery of ReO{sub 4}{sup {minus}} and TcO{sub 4}{sup {minus}}.

  8. Design and synthesis of reactive separation systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Doherty, M.F.

    1992-12-31

    During the last decade there has been a rapid upturn in interest in reactive distillation. The chemical process industry recognizes the favorable economics of carrying out reaction simultaneously with distillation for certain classes of reacting systems, and many new processes have been built based on this technology. Interest is also increasing by academics and software vendors. Systematic design methods for reactive distillation systems have only recently begun to emerge. In this report we survey the available design techniques and point out the contributions made by our group at the University of Massachusetts.

  9. Advanced-laser development for isotope separation. Final report

    International Nuclear Information System (INIS)

    1983-06-01

    To address a number of the issues associated with lasers appropriate for both atomic vapor and molecular laser enrichment schemes, MSNW developed pertinent technologies on two test devices. These were a high pulse rate, 100 watt excimer laser named Mistral, and a 20 watt copper-vapor laser (CVL). Mistral is a closed-loop, 100 W, kilohertz rare-gas halide laser system. The first half of the Mistral effort dealt with the study of gas flow and acoustic effects in high PRF rare-gas halide lasers. In burst-mode operation, 1250 Hz operation was demonstrated, the effects on flow quality of acoustic dampers were measured, and gas clearing factors of 2.5 at 1 kHz were demonstrated. The second half of the Mistral program dealt with extending the run time capability of the laser. This effort culminated with the continuous operation of Mistral for almost eight hours at 500 ppS, producing over 50 mJ/pulse at 308 nm on a single fill of XeCl gas mixture. At the end of the program, the effectiveness of using magnetic pulse compression in the modulator circuit of a copper-vapor laser (CVL) was also verified. The magnetic switching/pulse compression scheme as used on both the CVL and Mistral greatly extends thyratron lifetime

  10. Is There a Separate Visual Iconic Memory System? Final Report.

    Science.gov (United States)

    Levie, W. Howard; Levie, Diane D.

    The purpose of these studies was to provide evidence to support either the dual-coding hypothesis or the single-system hypothesis of human memory. In one experiment, college subjects were shown a mixed series of words and pictures either while simultaneously engaged in shadowing (repeating aloud) a prose passage presented via earphones or while…

  11. Catalyst functionalized buffer sorbent pebbles for rapid separation of carbon dioxide from gas mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Aines, Roger D

    2015-03-31

    A method for separating CO.sub.2 from gas mixtures uses a slurried media impregnated with buffer compounds and coating the solid media with a catalyst or enzyme that promotes the transformation of CO.sub.2 to carbonic acid. Buffer sorbent pebbles with a catalyst or enzyme coating are provided for rapid separation of CO.sub.2 from gas mixtures.

  12. Catalyst functionalized buffer sorbent pebbles for rapid separation of carbon dioxide from gas mixtures

    Science.gov (United States)

    Aines, Roger D.

    2013-03-12

    A method for separating CO.sub.2 from gas mixtures uses a slurried media impregnated with buffer compounds and coating the solid media with a catalyst or enzyme that promotes the transformation of CO.sub.2 to carbonic acid. Buffer sorbent pebbles with a catalyst or enzyme coating are provided for rapid separation of CO.sub.2 from gas mixtures.

  13. Production and chemical separation of 48 V radioisotope

    International Nuclear Information System (INIS)

    Szucs, Z.; Dudu, D.; Cimpeanu, C.; Luca, A.; Duta, E.; Sahagia, M.

    2003-01-01

    detected only 48 V. The advantages of this method are the easy dissolution of the target and the quick, complete separation of 48 V. The disadvantage is glassware avoiding, all lab-equipment must be produced of HF-resistant plastic material and the final product is difficult to be used due to the aggressive HF media. The sulfuric acid with concentration of 6 mol/l can also dissolve the target, however it is much more difficult than in the case of HF use. It needs heating under reflux for 6 hours. During the dissolution, the solid salt of Ti was produced in high amount. Only 50 % of the stoichiometric necessary amount of sulfuric acid for fully dissolution was used in order to avoid the dissolution of the part of the target in which the nuclear reaction was not produced. After the dissolution, the liquid and solid phase were separated and the solid salts were dissolved in 0.01 mol/l sulfuric acid. This soft acidic condition is necessary for effective separation on the Amberlite CG-50 column. The higher oxidation stage and the peroxide-complex of Ti is a guaranty for Ti remaining on the cation exchange column. Therefore 1% H 2 O 2 in 0.01 mol/l nitric acid was added to the sample. The orange color is a proof of successful chemical reaction. For ion exchange separation this solution was used. The elution was carried out by 1% H 2 O 2 in 0.01 mol/l nitric acid as an eluent. The radio-chromatogram was determined by the same method which was mentioned in the case of the separation in HF media. The chemical yield of the separation was higher than 95%. The radionuclide impurity of 46 Sc was less 0.02 % determined by γ-spectrometry. The chemical purity of 48 V was 99.8% according to Ti determined by VIS-spectrophotometry using the absorbance of peroxide complex of Ti in 420 nm approximately. The advantages of this method are the softer chemical circumstances and the easy use of the final product. The disadvantages are the long dissolution time, the several hand-operated steps and

  14. Social media management and media environment

    Directory of Open Access Journals (Sweden)

    Šiđanin Iva

    2012-01-01

    Full Text Available The paper deals with the system of services that social media management can offer to a variety of users. As social media systems are emerging, social media management can strengthen teams in social media and help to manage numerous social channels and distribution of social information from one place. Social media management is a system of procedures that are used to manage the flow of information in the environment of social media. This involves connecting with social media like Facebook, Twitter, LinkedIn, Plaxo, Ecademy, YouTube and many others, then the aggregation and management of social data. Social media management services are analysed through various fields, such as managing multiple social media profiles, mail scheduling and filtering, reporting and analytics. Social media management enables managing personal business through social media, which contributes to a significant reduction in expenditures. The paper also discusses the importance of social media management in marketing activities and various forms of social promotion, which allow companies to easily reach their customers.

  15. Safety shutdown separators

    Science.gov (United States)

    Carlson, Steven Allen; Anakor, Ifenna Kingsley; Farrell, Greg Robert

    2015-06-30

    The present invention pertains to electrochemical cells which comprise (a) an anode; (b) a cathode; (c) a solid porous separator, such as a polyolefin, xerogel, or inorganic oxide separator; and (d) a nonaqueous electrolyte, wherein the separator comprises a porous membrane having a microporous coating comprising polymer particles which have not coalesced to form a continuous film. This microporous coating on the separator acts as a safety shutdown layer that rapidly increases the internal resistivity and shuts the cell down upon heating to an elevated temperature, such as 110.degree. C. Also provided are methods for increasing the safety of an electrochemical cell by utilizing such separators with a safety shutdown layer.

  16. Seeds of Cross-Media Production

    DEFF Research Database (Denmark)

    Bødker, Susanne; Petersen, Anja Bechmann

    2007-01-01

    We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......, and our analyses focus on the rhythm of the daily planning, coordination and production processes. Specifically, we analyze the temporal coordination of the activities in and around the Superdesk – the current center of coordination of the news organization, and of the persons who work specifically...

  17. Wet separation processes as method to separate limestone and oil shale

    Science.gov (United States)

    Nurme, Martin; Karu, Veiko

    2015-04-01

    Biggest oil shale industry is located in Estonia. Oil shale usage is mainly for electricity generation, shale oil generation and cement production. All these processes need certain quality oil shale. Oil shale seam have interlayer limestone layers. To use oil shale in production, it is needed to separate oil shale and limestone. A key challenge is find separation process when we can get the best quality for all product types. In oil shale separation typically has been used heavy media separation process. There are tested also different types of separation processes before: wet separation, pneumatic separation. Now oil shale industry moves more to oil production and this needs innovation methods for separation to ensure fuel quality and the changes in quality. The pilot unit test with Allmineral ALLJIG have pointed out that the suitable new innovation way for oil shale separation can be wet separation with gravity, where material by pulsating water forming layers of grains according to their density and subsequently separates the heavy material (limestone) from the stratified material (oil shale)bed. Main aim of this research is to find the suitable separation process for oil shale, that the products have highest quality. The expected results can be used also for developing separation processes for phosphorite rock or all others, where traditional separation processes doesn't work property. This research is part of the study Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

  18. Rapid chemical separations

    CERN Document Server

    Trautmann, N

    1976-01-01

    A survey is given on the progress of fast chemical separation procedures during the last few years. Fast, discontinuous separation techniques are illustrated by a procedure for niobium. The use of such techniques for the chemical characterization of the heaviest known elements is described. Other rapid separation methods from aqueous solutions are summarized. The application of the high speed liquid chromatography to the separation of chemically similar elements is outlined. The use of the gas jet recoil transport method for nuclear reaction products and its combination with a continuous solvent extraction technique and with a thermochromatographic separation is presented. Different separation methods in the gas phase are briefly discussed and the attachment of a thermochromatographic technique to an on-line mass separator is shown. (45 refs).

  19. Acoustofluidic bacteria separation

    International Nuclear Information System (INIS)

    Li, Sixing; Huang, Tony Jun; Ma, Fen; Zeng, Xiangqun; Bachman, Hunter; Cameron, Craig E

    2017-01-01

    Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate Escherichia coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care sepsis diagnostic device. (paper)

  20. Acoustofluidic bacteria separation

    Science.gov (United States)

    Li, Sixing; Ma, Fen; Bachman, Hunter; Cameron, Craig E.; Zeng, Xiangqun; Huang, Tony Jun

    2017-01-01

    Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate Escherichia coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care sepsis diagnostic device.

  1. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-07

    This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.

  2. MEDIA AND WOMEN HEALTH IN INDIA

    OpenAIRE

    K. Parkavi

    2017-01-01

    Health Communication is an important domain in communication arena aims at disseminating health messages to the public. In this study the role of media in giving health information to women is analysed. The portrayal of women in media, the impact it creates on the minds of women, both urban and rural background is scrutinised separately. The responsibility of media in the rural health of women is critically studied and media’s role in Idealising body images in the mind of urban women is also ...

  3. Isotope separation by ion waves

    International Nuclear Information System (INIS)

    Dawson, J.M.

    1978-01-01

    One of the isotopes of an element having several isotopes can be separated from the others in a dense, neutral plasma. Thus initially a neutral plasma is prepared including the element in question. This may consist of positive ions and negative electrons or alternatively of positive and negative ions, or else of a mixture of positive ions, negative ions and electrons. The plasma may then be injected into a magnetic field or may be generated in the field where more energy is imparted to a selected isotope than to the others. Finally, the isotopes are separated from each other on the basis of their differential energies. For example, the selected isotope may be given more energy than the others by stimulating it within the plasma at its resonant frequency which may be close to the cyclotron frequency, either by an electric field or by a magnetic field. In order to excite the other isotope, a different resonant frequency is required which depends on the plasma density, the relative concentration of electrons if the plasma contains electrons, the strength of the magnetic field, the ratio of charge to mass of the isotope, and possibly on the physical parameters of the plasma apparatus itself, such as the ratio of the length of the plasma column to its radius. The more energetic isotope may be separated by energy dependent chemical reactions, it may be collected by a positively biased probe or else the isotopes may be separated from each other by magnetic fields or in various other ways

  4. Isotope separation by magnetic fields

    International Nuclear Information System (INIS)

    Dawson, J.M.

    1978-01-01

    One of the isotopes of an element having several isotopes can be separated from the others in a dense, neutral plasma. Thus initially a neutral plasma is prepared including the element in question. This may consist of positive ions and negative electrons or alternatively of positive and negative ions, or else of a mixture of positive ions, negative ions and electrons. The plasma may then be injected into a magnetic field or may be generated in the field where more energy is imparted to a selected isotope than to the others. Finally, the isotopes are separated from each other on the basis of their differential energies. For example, the selected isotope may be given more energy than the others by stimulating it within the plasma at its resonant frequency which may be close to the cyclotron frequency, either by an electric field or by a magnetic field. In order to excite the other isotope, a different resonant frequency is required which depends on the plasma density, the relative concentration of electrons if the plasma contains electrons, the strength of the magnetic field, the ratio of charge to mass of the isotope, and possibly on the physical parameters of the plasma apparatus itself, such as the ratio of the length of the plasma column to its radius. The more energetic isotope may be separated by energy dependent chemical reactions, it may be collected by a positively biased probe or else the isotopes may be separated from each other by magnetic fields or in various other ways

  5. Infant otitis media and the use of secondary heating sources.

    Science.gov (United States)

    Pettigrew, Melinda M; Gent, Janneane F; Triche, Elizabeth W; Belanger, Kathleen D; Bracken, Michael B; Leaderer, Brian P

    2004-01-01

    This prospective study investigated the association of exposure to indoor secondary heating sources with otitis media and recurrent otitis media risk in infants. We enrolled mothers living in nonsmoking households and delivering babies between 1993 and 1996 in 12 Connecticut and Virginia hospitals. Biweekly telephone interviews during the first year of life assessed diagnoses from doctors' office visits and use of secondary home heating sources, air conditioner use, and day care. Otitis media episodes separated by more than 21 days were considered to be unique episodes. Recurrent otitis media was defined as 4 or more episodes of otitis media. Repeated-measures logistic regression modeling evaluated the association of kerosene heater, fireplace, or wood stove use with otitis media episodes while controlling for potential confounders. Logistic regression evaluated the relation of these secondary heating sources with recurrent otitis media. None of the secondary heating sources were associated with otitis media or with recurrent otitis media. Otitis media was associated with day care, the winter heating season, birth in the fall, white race, additional children in the home, and a maternal history of allergies in multivariate models. Recurrent otitis media was associated with day care, birth in the fall, white race, and a maternal history of allergies or asthma. We found no evidence that the intermittent use of secondary home heating sources increases the risk of otitis media or recurrent otitis media. This study confirms earlier findings regarding the importance of day care with respect to otitis media risk.

  6. The media and dirty bombs

    International Nuclear Information System (INIS)

    Hanley, C.J.

    2003-01-01

    During the recent Jose Padilla 'dirty bomb' scare, an indignant US citizen wrote to his local newspaper in Florida complaining that the news media were giving terrorists a recipe for making dirty bombs. 'Unless the media eases up on scaring us, he wrote, the public won't feel safe even leaving their homes. Or perhaps that is what they want, he said, 'us staying inside our homes watching the news on how terrorists can destroy us all.' It seems our real motivations have finally been uncovered we in the media want to scare them so much they won't leave their TV screens. Based on the previous event an analysis of the role of media and journalists is discussed. Leaders of the news media would, first of all, universally advise full and rapid and authoritative disclosure of what is known. If it isn't coming quickly from the highest levels, then the news will soon deteriorate to what's being heard on the streets, from police officers and fire fighters and other emergency personnel, and from passers-by. Journalists are the first to acknowledge their ignorance.That is why they ask questions. However, they seem to learn fast. It was found that that the term dirty bomb never appeared on Associated Press news wires before the 11 September 2001 attacks. Now it appears every day, and increasingly we are getting the facts right and helping to prepare our audience of millions for this dangerous new world

  7. La estela de El Carpio (Córdoba); avance a una nueva manifestación simbólica del bronce final en la vega media del Guadalquivir

    OpenAIRE

    Martínez Sánchez, Rafael M.ª

    2008-01-01

    Se presenta un avance al reciente descubrimiento de una nueva estela del Bronce Final procedente de la localidad cordobesa de El Carpio, hallada reutilizada en la torre medieval de dicha población. La inclusión de dos figuras humanas en el monumento dentro de una aparente jerarquía compositiva y la dinámica escénica de la representación conservada nos obliga a relacionarla con ejemplos coetáneos procedentes del Valle del Guadalquivir, uno de cuyos exponentes más espectacu...

  8. Chemical separation of boron isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Palko, A.A.

    1978-06-01

    This is the final report of the research performed at ORNL on the chemical fractionation of boron isotopes between BF/sub 3/ gas and the liquid molecular addition compounds of BF/sub 3/. Thirty compounds were studied, ten of them in detail. Graphs and equations are given for variation of isotopic equilibrium constant, vapor pressure, and BF/sub 3/ solubility as a function of temperature. Rate of isotopic exchange and melting points were determined. Several of the compounds are likely candidates for use in a gas-liquid countercurrent exchange system for large-scale separation of boron isotopes. 23 figs, 53 tables, 39 references.

  9. Chemical separation of boron isotopes

    International Nuclear Information System (INIS)

    Palko, A.A.

    1978-06-01

    This is the final report of the research performed at ORNL on the chemical fractionation of boron isotopes between BF 3 gas and the liquid molecular addition compounds of BF 3 . Thirty compounds were studied, ten of them in detail. Graphs and equations are given for variation of isotopic equilibrium constant, vapor pressure, and BF 3 solubility as a function of temperature. Rate of isotopic exchange and melting points were determined. Several of the compounds are likely candidates for use in a gas-liquid countercurrent exchange system for large-scale separation of boron isotopes. 23 figs, 53 tables, 39 references

  10. Method for separating isotopes

    International Nuclear Information System (INIS)

    Jepson, B.E.

    1976-01-01

    The invention comprises a method for separating different isotopes of elements from each other by contacting a feed solution containing the different isotopes with a macrocyclic polyether to preferentially form a macrocyclic polyether complex with the lighter of the different isotopes. The macrocyclic polyether complex is then separated from the lighter isotope depleted feed solution. A chemical separation of isotopes is carried out in which a constant refluxing system permits a continuous countercurrent liquid-liquid extraction. (LL)

  11. Exogenous vs. Endogenous Separation

    OpenAIRE

    Ramey, Garey

    2008-01-01

    This paper assesses how various approaches to modelling the separation margin a¤ect the ability of the Mortensen-Pissarides job matching model to explain key facts about the aggregate labor market. Allowing for realistic time variation in the separation rate, whether exogenous or endogenous, greatly in- creases the unemployment variability generated by the model. Speci…cations with exogenous separation rates, whether constant or time-varying, fail to pro- duce realistic volatility and prod...

  12. Method for separating isotopes

    International Nuclear Information System (INIS)

    Schlenker, R.F.

    1978-01-01

    A vortex tube for separating isotopes is described. A gas mixture containing the isotopic molecules enters the vortex tube under pressure and is separated into a hot discharge flow stream and a cold discharge flow stream. The hot discharge is enriched in lighter isotopic molecules whereas the cold discharge flow stream is enriched in the heavier isotopic molecules. The vortex tube can be used in a single stage or multistage isotope separation apparatus

  13. Media Literacy Bibliography.

    Science.gov (United States)

    Duncan, Barry

    1989-01-01

    Provides an up-to-date bibliography of resources available for teaching media literacy. Groups resources into the areas of media education methodology, mass media texts, general background, television, film, the news and medium of print, advertising, gender and the media, popular culture, popular music and rock video, periodicals, and…

  14. Separation and retention of iodine

    International Nuclear Information System (INIS)

    Thomas, T.R.

    1976-01-01

    Caustic and mercuric nitrate scrubbers have been used for iodine recovery from process offgas, but they exhibit low decontamination factors for organic iodide removal and produce liquid wastes that are unsuitable for final storage. The Iodox process gives high decontamination factors for both organic iodides and elemental iodine. The liquid waste can be evaporated to a solid or concentrated and fixed in cement. Efficient separation and retention of gaseous iodine species can be obtained with silver-loaded adsorbents. The waste is a dry solid easily handled and stored. Adsorbents containing cheaper metals appear to have lower iodine-loading capacities and may be unsuitable for bulk iodine removal from process offgas because of the large amounts of solid waste that would be generated. A potential method for regenerationg and recycling silver-loaded adsorbents is being evaluated. In conjunction with the regeneration, lead-exchanged zeolite is used as a secondary adsorbent for the final fixation and storage of the iodine

  15. Centrifugal gas separator

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, M

    1970-03-27

    A centrifugal gas separator of a highly endurable construction and with improved gas sealing qualities utilizes a cylincrical elastic bellows or similar system in cooperation with a system of dynamic pressure operable gas seals as means for removing separated gases from the interior of the rotor drum, collecting the separated gases in their respective separated gas chambers defined by the corresponding bellows and their supporting stationary wall members, gas seals and rotor end caps, and means for discharging to the exterior of the surrounding cylindrical wall member the gaseous components from their respective separated gas chambers. In the vicinity of the rotary drum motor is a mixed gas chamber and means for providing the gas mixture along a co-axial passage into the rotary drum chamber. Orifices are bored into the end caps of the rotary drum to direct the separated gases into the aforementioned separated gas chambers which, through the action of the gas seals, freely slide upon the rotating drum to collect and thereafter discharge the thus separated gases. Therefore, according to the present invention, helium gas used to prevent separated gas remixture is unnecessary and, furthermore, the gas seals and elastic bellows means provide an air-tight seal superior to that of the contact sealing system of the former art.

  16. Entrainment separator performance

    International Nuclear Information System (INIS)

    First, M.W.; Leith, D.

    1976-01-01

    Clean and dust-loaded ACS entrainment separators mounted upstream of HEPA filters were exposed to a combination of fine water mist and steam at about 70 0 C from one to four hours. In every trial, the ACS entrainment separator prevented measurable deterioration of performance in the following HEPA filter. Droplet size-efficiency evaluation of the ACS entrainment separators showed that, within the accuracy of the measurements, they meet all service requirements and are fully equal to the best separator units available for service on pressurized water reactors

  17. Centrifugal gas separator

    International Nuclear Information System (INIS)

    Sakurai, Mitsuo.

    1970-01-01

    A centrifugal gas separator of a highly endurable construction and with improved gas sealing qualities utilizes a cylincrical elastic bellows or similar system in cooperation with a system of dynamic pressure operable gas seals as means for removing separated gases from the interior of the rotor drum, collecting the separated gases in their respective separated gas chambers defined by the corresponding bellows and their supporting stationary wall members, gas seals and rotor end caps, and means for discharging to the exterior of the surrounding cylindrical wall member the gaseous components from their respective separated gas chambers. In the vicinity of the rotary drum motor is a mixed gas chamber and means for providing the gas mixture along a co-axial passage into the rotary drum chamber. Orifices are bored into the end caps of the rotary drum to direct the separated gases into the aforementioned separated gas chambers which, through the action of the gas seals, freely slide upon the rotating drum to collect and thereafter discharge the thus separated gases. Therefore, according to the present invention, helium gas used to prevent separated gas remixture is unnecessary and, furthermore, the gas seals and elastic bellows means provide an air-tight seal superior to that of the contact sealing system of the former art. (K.J. Owens)

  18. Separation of flow

    CERN Document Server

    Chang, Paul K

    2014-01-01

    Interdisciplinary and Advanced Topics in Science and Engineering, Volume 3: Separation of Flow presents the problem of the separation of fluid flow. This book provides information covering the fields of basic physical processes, analyses, and experiments concerning flow separation.Organized into 12 chapters, this volume begins with an overview of the flow separation on the body surface as discusses in various classical examples. This text then examines the analytical and experimental results of the laminar boundary layer of steady, two-dimensional flows in the subsonic speed range. Other chapt

  19. Reflecting on democratic and responsible citizenship. Where do the media step in?

    Directory of Open Access Journals (Sweden)

    Oana BĂLUŢĂ

    2013-12-01

    Full Text Available Citizenship is one notion that generated debates and, on occasion, contradictory positions within academic community, opening the doors not only for political scientists, but for practitioners, activists, politicians as well to step in. The paper aims to explore and highlight how sociologists, political scientists and mass media practitioners envisage responsible and democratic citizenship in Romania. Reviews of literature developments on citizenship in connection with democracy and participation, and perspectives of local journalists, sociologists and political scientists on the intersection of media and responsible citizenship allowed me to highlight key inner marks of responsible and democratic citizenship. The final part of the paper proposes a process of (rethinking citizenship, emphasizing few propositions with a decisive role when drafting responsible and democratic citizenship: citizenship cannot be separated from participation, active participation; citizenship is correlated with political interests; 3. Active citizenship is democratic and responsible citizenship; citizenship has both a private and a public dimension.

  20. ANALISIS CATEGORY ADVERTISING EXPENDITURE DAN CONSUMER MEDIA HABIT DI MEDIA TELEVISI DAN MEDIA CETAK

    Directory of Open Access Journals (Sweden)

    Zifwen Zifwen

    2011-08-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The purpose of the study is to identify the category of advertising expenditure and media habit on media advertising, especially on television and print ad such as newspapers, magazines and tabloids. The Data were collected  from Nielsen Media Research (NMR data base from a number of cities in Indonesia, such as Jakarta,Surabaya, Bandung, Semarang, Surabaya, Yogyakarta, Bali, Medan,Palembang and Makassar. There are three different type of data used to acquire the secondary data for the study: (1  Telescope (data collected for rating analysis January 1st, 2005 to March 31st, 2005, (2 Print scope (data collected from the readership of magazines, tabloids and newspaper January 1st, 2004 to December 31st, 2004 and (3 Ad quest (data collected from advertising expenditure for all categories. The data were collected, calculated and analyzed from January 1st, 2002 to December 31st, 2004. The purpose of the study is to uncover the trend of advertising budget from all categories on the television and print ads, in order to describe the consumption tendency of the people within advertising media. Index analysis and Biplot were used to analyze the data. Based on the result of advertising expenditure analysis of data, showing that all categories were completely different in the utilization of the media for advertisement. Some categories used mix media to support their campaign and others used a single media. Characteristic of the categories were strongly involved in the decision making in way of choosing and using the advertising media. The result of consumer media analysis found that the people habit were completely different and unique in media consumption. Different of age, sex and social economic status can create a different habit in term of hobbies and desire within the channel, programme, newspaper, magazines and the tabloids. Finally, to create an effective and efficient advertising activity

  1. Are the nonionic contrast media really safe

    International Nuclear Information System (INIS)

    Seyferth, W.; Zeitler, E.

    1987-01-01

    The authors used a wide variety of ionic and nonionic contrast media in 11,203 patient examinations (angiography, phlebography, CT). Data have been collected in prospective studies since 1982. The rate of mild side effects was reduced by a factor of 2 to 3 for all examinations when nonionic contrast media were used. Angiography may not be suitable for evaluating the safety of contrast media. Because of statistical requirements, the influence of nonionic media on the rate of severe side effects will not be known for some time. The side effects of nonionic contrast media were somewhat delayed, and differed from times reported in the literature: 29% of wide effects were noticed within 15 minutes and 71% between 25 minutes to 72 hours after the study. The final results of the study will have numerous consequences for patient treatment protocols

  2. Social media and (dis)connectivity

    DEFF Research Database (Denmark)

    Tække, Jesper

    The paper discuss the relation between media of communication and societal (dis)connectivity. The question is how communication media provide society with different possibilities for (dis)connectivity in different historical media societies. The paper draws on Luhmann’s theory of social systems...... for social systems to develop structures with new forms of communicative connections. Even though society only is possible because of communication media and gets new possibilities for the formation of new structures providing it with new connection possibilities, in the beginning a new communication medium....... In the present society we also see signs of new dis-connectivity, i.e. fake news, political polarization, and economic and democratic inequality. In the final section the paper analyse such problems triggered by digital media. Also the paper point out some new possibilities triggered by the acquisition of social...

  3. Intelligent Multi-Media Integrated Interface Project

    Science.gov (United States)

    1990-06-01

    been devoted to the application of aritificial intelligence technology to the development of human -computer interface technology that integrates speech...RADC-TR-90-128 Final Technical Report June 1090 AD-A225 973 INTELLIGENT MULTI-MEDIA INTEGRATED INTERFACE PROJECT Calspan-University of Buffalo...contractual obligations or notices on a specific document require that it be returned. INTELLIGENT MULTI-MEDIA INTEGRATED INTERFACE PROJECT J. G. Neal J. M

  4. Understanding Social Media Logic

    OpenAIRE

    José van Dijck; Thomas Poell

    2013-01-01

    Over the past decade, social media platforms have penetrated deeply into the mech­anics of everyday life, affecting people's informal interactions, as well as institutional structures and professional routines. Far from being neutral platforms for everyone, social media have changed the conditions and rules of social interaction. In this article, we examine the intricate dynamic between social media platforms, mass media, users, and social institutions by calling attention to social media log...

  5. Social media influencer marketing

    OpenAIRE

    Isosuo, Heli

    2016-01-01

    The marketing field is changing simultaneously with the digital world. Social media is getting more and more important to marketers, and there is a need to stand out in the social media noise. Social media influencer marketing could be a good alternative to other types of marketing. A need from the consignor and the interest of the author were the motivations for conducting the study. Sääskilahti Consulting has a social media influencer network Somevaikuttajat, which is offering social media ...

  6. Separation of tungsten and rhenium on alumina

    Directory of Open Access Journals (Sweden)

    MILOVAN SM. STOILJKOVIC

    2004-09-01

    Full Text Available The conditions for the efficient separation of tungsten(VI and rhenium (VII on alumina were established. The distribution coefficients Kd for tungstate and perrhenate anions, as well as the separation factors a (a = KdWO42-/Kd ReO4- were determined using hydrochloric or nitric acid as the aqueous media. A solution of sodium chloride in the pH range 2–6 was also examined. Under all the tested experimental conditions, alumina is a much better adsorbent for tungsten than for rhenium. The obtained results indicated that the best separation of these two elements is achieved when 0.01– 0.1 mol dm-3 HCl or 1.0 mol dm-3 HNO3 are used as the aqueous media. If NaCl is used as the aqueous phase, the best separation is achieved with 0.20 mol dm-3 NaCl, pH 4–6. Under these experimental conditions, the breakthrough and saturation capacities of alumina for tungsten at pH 4 are 17 and 26 mg W/g Al2O3, respectively. With increasing pH, these values decrease. Thus, at pH 6 they are only 4 and 13 mg W/g Al2O3, respectively.

  7. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-02-07

    This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.

  8. Separation of ionic solutes

    International Nuclear Information System (INIS)

    1986-01-01

    The conference proceedings contain 44 papers of which 19 were incorporated in INIS. The subject of these is the use of solvent extraction or emulsion membrane extraction for separation of fission products, rare earth compounds and actinide compunds; the sorption of radionuclides; and the use of adsorbents and chelating agents in separation processes. (J.P.)

  9. Process for isotope separation

    International Nuclear Information System (INIS)

    Schuster, E.; Kersting, A.; Gebauhr, W.

    1980-01-01

    Isotope separation in UF 6 gas takes place on the principle of selective excitation by laser irradiation and separation by chemical conversion with a partner in a reaction. Atomic H, N or O or the CH 3 or CHO radicals are suitable partners in the reaction. The recombination takes place by catalytic acceleration on leaving the reaction area. (DG) [de

  10. Separation of uranium isotopes

    International Nuclear Information System (INIS)

    Porter, J.T.

    1980-01-01

    Methods and apparatus are disclosed for separation of uranium isotopes by selective isotopic excitation of photochemically reactive uranyl salt source material at cryogenic temperatures, followed by chemical separation of selectively photochemically reduced U+4 thereby produced from remaining uranyl source material

  11. Isotope separation process

    International Nuclear Information System (INIS)

    Lyon, R.K.

    1979-01-01

    A method is described for the isotopically selective excitation of gas phase molecules by multiple infrared photon absorption after which more of the excited molecules than nonexcited molecules are converted to a chemically different form which may be separated by means known in the art. This invention is useful for, but not limited to, the separation of the principal isotopes of uranium

  12. Separation anxiety disorder

    NARCIS (Netherlands)

    Nauta, M.H.; Emmelkamp, P.M.G.; Sturmey, P.; Hersen, M.

    2012-01-01

    Separation anxiety disorder (SAD) is the only anxiety disorder that is specific to childhood; however, SAD has hardly ever been addressed as a separate disorder in clinical trials investigating treatment outcome. So far, only parent training has been developed specifically for SAD. This particular

  13. Method for separating isotopes

    International Nuclear Information System (INIS)

    Jepson, B.E.

    1975-01-01

    Isotopes are separated by contacting a feed solution containing the isotopes with a cyclic polyether wherein a complex of one isotope is formed with the cyclic polyether, the cyclic polyether complex is extracted from the feed solution, and the isotope is thereafter separated from the cyclic polyether

  14. Students' use of social media during the travel process

    OpenAIRE

    Nemec Rudež, Helena; Vodeb, Ksenija

    2015-01-01

    Purpose – The purpose of the study is to explore how students as an important travel segment are involved in social media during the travel process and explore the underlying dimensions of social media use by students during the travel process. Design/methodology/approach – The quantitative research focuses on the students’ use of social media in the three phrases of the travel process – before travel, during travel and after travel separately. Survey instrument was a structured questionna...

  15. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

  16. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

  17. Learning Through Media; An IMC Handbook for Chelmsford Teachers.

    Science.gov (United States)

    Morrow, James; Wallace, Daniel

    This handbook is designed to provide basic information that is necessary to use the Chelmsford School System's Instructional Media Center (IMC). It defines six different media (print, sound, television, photography, movies and design) and suggests a series of separate classroom production activities in each. An emphasis is given to the ways in…

  18. Unpacking New Media Literacy

    Directory of Open Access Journals (Sweden)

    Der-Thanq “victor” Chen

    2011-04-01

    Full Text Available The 21st century has marked an unprecedented advancement of new media. New media has become so pervasive that it has penetrated into every aspect of our society. New media literacy plays an essential role for any citizen to participate fully in the 21st century society. Researchers have documented that literacy has evolved historically from classic literacy (reading-writing-understanding to audiovisual literacy to digital literacy or information literacy and recently to new media literacy. A review of literature on media literacy reveals that there is a lack of thorough analysis of unique characteristics of new media and its impacts upon the notion of new media literacy. The purpose of the study is to unpack new media literacy and propose a framework for a systematic investigation of new media literacy.

  19. Isotope separation process

    International Nuclear Information System (INIS)

    Cox, D.M.; Maas, E.T.

    1982-01-01

    Processes are disclosed for the separation of isotopes of an element comprising vaporizing uranyl compounds having the formula (UO2a2)n, where a is a monovalent anion and n in an integer from 2 to 4, the compounds having an isotopically shifted infrared absorption spectrum associated with uranyl ions containing said element which is to be separated, and then irradiating the uranyl compound with infrared radiation which is preferentially absorbed by a molecular vibration of uranyl ions of the compound containing a predetermined isotope of that element so that excited molecules of the compound are provided which are enriched in the molecules of the compound containing that predetermined isotope, thus enabling separation of these excited molecules. The processes disclosed include separation of the excited molecules by irradiating under conditions such that the excited molecules dissociate, and also separating the excited molecules by a discrete separation step. The latter includes irradiating the excited molecules by a second infrared laser in order to convert the excited molecules into a separable product, or also by chemically converting the excited molecules, preferably by reaction with a gaseous reactant

  20. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  1. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Robert C. [Texas A& M University; Kamon, Teruki [Texas A& M University; Toback, David [Texas A& M University; Safonov, Alexei [Texas A& M University; Dutta, Bhaskar [Texas A& M University; Dimitri, Nanopoulos [Texas A& M University; Pope, Christopher [Texas A& M University; White, James [Texas A& M University

    2013-11-18

    Overview The High Energy Physics Group at Texas A&M University is submitting this final report for our grant number DE-FG02-95ER40917. This grant has supported our wide range of research activities for over a decade. The reports contained here summarize the latest work done by our research team. Task A (Collider Physics Program): CMS & CDF Profs. T. Kamon, A. Safonov, and D. Toback co-lead the Texas A&M (TAMU) collider program focusing on CDF and CMS experiments. Task D: Particle Physics Theory Our particle physics theory task is the combined effort of Profs. B. Dutta, D. Nanopoulos, and C. Pope. Task E (Underground Physics): LUX & NEXT Profs. R. Webb and J. White(deceased) lead the Xenon-based underground research program consisting of two main thrusts: the first, participation in the LUX two-phase xenon dark matter search experiment and the second, detector R&D primarily aimed at developing future detectors for underground physics (e.g. NEXT and LZ).

  2. Relaciones con los medios a finales del siglo XIX: antecedentes de los comunicados de prensa en la prensa malagueña / Media relations in the late nineteenth century: press releases in the malacitan press

    Directory of Open Access Journals (Sweden)

    Jesús REINA-ESTÉVEZ

    2015-01-01

    Full Text Available La presente investigación trata de rastrear algunos antecedentes de comunicados de prensa y otros instrumentos de comunicación empresarial en la prensa malagueña de finales del siglo XIX. Para obtener los resultados se aplica el método del análisis de contenido sobre las comunicaciones que el periódico La Unión Mercantil (1886-1936 publicó en las secciones específicas: comunicado, remitido, circulares y avisos, en el periodo comprendido entre su nacimiento en 1886 y el comienzo del conflicto bélico cubano a principios de 1895. Los ejemplares digitalizados del diario se hallan disponibles online para su consulta en la página web del Archivo Narciso Díaz de Escovar, con la excepción del año 1892, cuya colección ha desaparecido casi por completo. Se logran obtener 400 resultados válidos, que se analizan según criterios de autoría y origen, objetivos de comunicación, y fuentes mencionadas. Este trabajo inicia una línea de debate casi desconocida en España, dada la falta de investigaciones monográficas de periódicos esenciales para la historia del periodismo en nuestro país, a nivel técnico y de contenido, a la vez que incide en la búsqueda de antecedentes de relaciones públicas antes del inicio oficial de la disciplina mediados los años sesenta del siglo XX.

  3. Deuterium isotope separation

    International Nuclear Information System (INIS)

    Benson, S.W.

    1979-01-01

    Deuterium-containing molecules are separated and enriched by exposing commercially available ethylene, vinyl chloride, 1,2-dichloroethane or propylene to the radiation of tuned infrared lasers to selectively decompose these compounds into enriched molecular products containing deuterium atoms. The deuterium containing molecules can be easily separated from the starting material by absorption, distillation or other simple chemical separation techniques and methods. After evaporation such deuterium containing molecules can be burned to form water with an enriched deuterium content or pyrolyzed to form hydrogen gas with an enriched deuterium content. (author)

  4. Chromatographic hydrogen isotope separation

    International Nuclear Information System (INIS)

    Aldridge, F.T.

    1983-01-01

    Intermetallic compounds with the CaCu5 type of crystal structure, particularly LaNiCo and CaNi5, exhibit high separation factors and fast equilibrium times and therefore are useful for packing a chromatographic hydrogen isotope separation column. The addition of an inert metal to dilute the hydride improves performance of the column. A large scale multi-stage chromatographic separation process run as a secondary process off a hydrogen feedstream from an industrial plant which uses large volumes of hydrogen can produce large quantities of heavy water at an effective cost for use in heavy water reactors

  5. Chromatographic hydrogen isotope separation

    International Nuclear Information System (INIS)

    Aldridge, F.T.

    1981-01-01

    Intermetallic compounds with the CaCu5 type of crystal structure , particularly LaNiCo and CaNi5, exhibit high separation factors and fast equilibrium times and therefore are useful for packing a chromatographic hydrogen isotope separation colum. The addition of an inert metal to dilute the hydride improves performance of the column. A large scale mutli-stage chromatographic separation process run as a secondary process off a hydrogen feedstream from an industrial plant which uses large volumes of hydrogen can produce large quantities of heavy water at an effective cost for use in heavy water reactors

  6. Magnetic separations in biotechnology.

    Science.gov (United States)

    Borlido, L; Azevedo, A M; Roque, A C A; Aires-Barros, M R

    2013-12-01

    Magnetic separations are probably one of the most versatile separation processes in biotechnology as they are able to purify cells, viruses, proteins and nucleic acids directly from crude samples. The fast and gentle process in combination with its easy scale-up and automation provide unique advantages over other separation techniques. In the midst of this process are the magnetic adsorbents tailored for the envisioned target and whose complex synthesis spans over multiple fields of science. In this context, this article reviews both the synthesis and tailoring of magnetic adsorbents for bioseparations as well as their ultimate application. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Mass Media: The Invisible Environment.

    Science.gov (United States)

    Glessing, Robert J.; White, William P.

    This anthology for students of media consists of essays and articles grouped under four topics: media forms, media content, media environments, and "the last word." Media forms deals with the nature of these kinds of media: electronic, print, film, music, and comics, graffiti, and clothing. Media content contains articles on the news, advertising,…

  8. Media Pluralism and Diversity

    DEFF Research Database (Denmark)

    In the western world, a diverse and pluralistic media landscape is deemed essential for democracy. But how universal is media pluralism as a concept underpinning media policies? To what extent do normative approaches, regulatory dimensions and monitoring systems differ throughout the world......? Adopting a truly global, theoretical and multidisciplinary perspective, Media Pluralism and Diversity advances our understanding of media pluralism across the globe. It compares metrics developed in different parts of the world to assess levels of, or threats to, media pluralism. It identifies common...

  9. Social Media Reputation

    DEFF Research Database (Denmark)

    Etter, Michael Andreas; Ravasi, Davide; Colleoni, Elanor

    motivational drivers and contextual conditions associated with the formation of narratives in traditional news media and social media influence their content, diffusion, and impact significantly. Our analysis suggests that current theories of media reputation may provide an incomplete representation......Social media enable millions of users to create and disseminate narratives about organizations that increase their public exposure and shape public perceptions. In this paper, we draw on the sociology of news production and research on computer-mediated communication to discuss how different...... of the phenomenon, and highlight theoretically relevant differences and interrelationships between reputational dynamics involving news media and social media....

  10. Children's media consumption in Serbia

    Directory of Open Access Journals (Sweden)

    Filipović Jelena

    2009-01-01

    Full Text Available The paper aims at providing an insight into media consumption among children in Serbia. A consumer survey was conducted to examine differences in children's consumption of various advertising media based on their age, gender and hometown. The research findings revealed significant differences between the two age cohorts in the three out of four tested media categories (TV, print, radio and Internet. On the other hand, the research findings also revealed variations in consumption of radio and print media, and no difference in the consumption of television and Internet between boys and girls. Finally, the research findings suggested significant differences in the consumption of Internet among children living in five cities in Serbia. Though the sample included more than 700 children it cannot be considered strictly representative for the whole country since the survey was conducted in urban areas only. However, the greatest value of this study comes from the fact that the research was placed in Serbia as a transitional society of the Western Balkans which has been seriously underrepresented in the main body of contemporary marketing theory and research studies. Therefore, one of the main goals of this paper was to make a contribution to better understanding of local conditions that might influence marketing decisions when communicating with children as a specific target group on Serbian market.

  11. Separations by centrifugal phenomena

    International Nuclear Information System (INIS)

    Hsu, H.W.

    1981-01-01

    The technical information presented herein emphasizes the uniqueness of the centrifugal separations methodology and pertinent theory for various kinds of centrifugation. The topics are arranged according to gas, liquid, and solid phases, in the order of increasing densities. Much space is devoted to liquid centrifugation because of the importance of this technique in chemical and biological laboratories. Many separational and characterizational examples are illustrated in detail. The material has been divided into 7 chapters entitled: 1) Introduction, 2) Basic Theory of Centrifugation, 3) Gas Centrifuges, 4) Preparative Liquid Centrifuges, 5) Analytical Liquid Centrifuges, 6) Liquid Centrifuges in Practice, and 7) Mechanical Separations by Centrifuges. Separate abstracts have been prepared for each chapter except the introduction

  12. Partially separable t matrix

    International Nuclear Information System (INIS)

    Sasakawa, T.; Okuno, H.; Ishikawa, S.; Sawada, T.

    1982-01-01

    The off-shell t matrix is expressed as a sum of one nonseparable and one separable terms so that it is useful for applications to more-than-two body problems. All poles are involved in this one separable term. Both the nonseparable and the separable terms of the kernel G 0 t are regular at the origin. The nonseparable term of this kernel vanishes at large distances, while the separable term behaves asymptotically as the spherical Hankel function. These properties make our expression free from defects inherent in the Jost or the K-matrix expressions, and many applications are anticipated. As the application, a compact expression of the many-level formula is presented. Also the application is suggested to the breakup threebody problem based on the Faddeev equation. It is demonstrated that the breakup amplitude is expressed in a simple and physically interesting form and we can calculate it in coordinate space

  13. Separation by solvent extraction

    International Nuclear Information System (INIS)

    Holt, C.H. Jr.

    1976-01-01

    In a process for separating fission product values from U and Pu values contained in an aqueous solution, an oxidizing agent is added to the solution to secure U and Pu in their hexavalent state. The aqueous solution is contacted with a substantially water-immiscible organic solvent with agitation while the temperature is maintained at from -1 to -2 0 C until the major part of the water present is frozen. The solid ice phase is continuously separated as it is formed and a remaining aqueous liquid phase containing fission product values and a solvent phase containing Pu and U values are separated from each other. The last obtained part of the ice phase is melted and added to the separated liquid phase. The resulting liquid is treated with a new supply of solvent whereby it is practically depleted of U and Pu

  14. CHROMATOGRAPHIC SEPARATION AND SPECTRO ...

    African Journals Online (AJOL)

    Four different fractions having colours yellow, grey, orange and ... Two different dyes vis a vis: methylene blue and malachite green dyes have been separated .... hydrogen carbonate of alkaline and alkaline earth metals in the samples.

  15. AMAMM - All Media Are Mixed Media

    DEFF Research Database (Denmark)

    All Media Are Mixed Media Alle medier er blandingsmedier. Alle kunstarter er kompositte. Alle sanser er sammensatte. Alle medialiteter er miksede og mangfoldige. Alle er AMAMM. Denne påstand står centralt i ord-, billed- og medie-teoretikeren W.J.T. Mitchells forfatterskab. I hosstående bog tager...

  16. Hydrogen separation process

    Science.gov (United States)

    Mundschau, Michael [Longmont, CO; Xie, Xiaobing [Foster City, CA; Evenson, IV, Carl; Grimmer, Paul [Longmont, CO; Wright, Harold [Longmont, CO

    2011-05-24

    A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to a hydrogen separation membrane system comprising a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to an integrated water gas shift/hydrogen separation membrane system wherein the hydrogen separation membrane system comprises a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for pretreating a membrane, comprising: heating the membrane to a desired operating temperature and desired feed pressure in a flow of inert gas for a sufficient time to cause the membrane to mechanically deform; decreasing the feed pressure to approximately ambient pressure; and optionally, flowing an oxidizing agent across the membrane before, during, or after deformation of the membrane. A method of supporting a hydrogen separation membrane system comprising selecting a hydrogen separation membrane system comprising one or more catalyst outer layers deposited on a hydrogen transport membrane layer and sealing the hydrogen separation membrane system to a porous support.

  17. UWIS isotope separator

    Energy Technology Data Exchange (ETDEWEB)

    Wojtasiewicz, A. [Warsaw Univ., Inst. of Experimental Physics, Nuclear Physics Div., Warsaw (Poland)

    1997-12-31

    Since 1995 the University of Warsaw Isotope Separator group has participated in the ISOL/IGISOL project at the Heavy Ion Cyclotron. This project consists in installation of an isotope separator (on line with cyclotron heavy ion beam) with a hot plasma ion source (ISOL system) and/or with an ion guide source (IGISOL system). In the report the short description of the present status of the project is presented. 2 figs, 10 refs.

  18. Separating oil from water

    Energy Technology Data Exchange (ETDEWEB)

    Webb, C

    1991-04-11

    The technology available to deal with oil spills has assumed many new faces in recent years. Methods of dealing with small-scale pollution in the process industries and vast oil slicks such as that in the Gulf have developed in parallel. The progress being made in finding new means of separating oil from water is reported and the relative merits of bioremediation, hydrocylones, horizontal separators and gas flotation are discussed. (author).

  19. Particle transport in porous media

    Science.gov (United States)

    Corapcioglu, M. Yavuz; Hunt, James R.

    The migration and capture of particles (such as colloidal materials and microorganisms) through porous media occur in fields as diversified as water and wastewater treatment, well drilling, and various liquid-solid separation processes. In liquid waste disposal projects, suspended solids can cause the injection well to become clogged, and groundwater quality can be endangered by suspended clay and silt particles because of migration to the formation adjacent to the well bore. In addition to reducing the permeability of the soil, mobile particles can carry groundwater contaminants adsorbed onto their surfaces. Furthermore, as in the case of contamination from septic tanks, the particles themselves may be pathogens, i.e., bacteria and viruses.

  20. Low Complexity Bayesian Single Channel Source Separation

    DEFF Research Database (Denmark)

    Beierholm, Thomas; Pedersen, Brian Dam; Winther, Ole

    2004-01-01

    can be estimated quite precisely using ML-II, but the estimation is quite sensitive to the accuracy of the priors as opposed to the source separation quality for known mixing coefficients, which is quite insensitive to the accuracy of the priors. Finally, we discuss how to improve our approach while...

  1. PEREMPUAN DALAM JERATAN EKSPLOITASI MEDIA MASSA

    Directory of Open Access Journals (Sweden)

    Delmira Syafrini

    2014-06-01

    Full Text Available Exploitation of women now comes in new faces; through the mass media. Media currently has a dual role, like two sides of a coin, on one side the media serves as a mediator for the improvement and progress of the nation, on the other side contributes to the suppression of media for the benefit of market capitalism toward consumer culture women once again being the subject of image construction. Expansion of the market and the mass media can not be separated from the flow of consumerism, because the mass media (particularly advertising on television is an extension of the market to boost sales of industrial products in the form of imagery that originates from the "mode of production". Through the process of meaning people are affected by the image created by the market and advertisement that increase their consumptive behavior. Here begins the role of advertising in blurring the identity as the supporting tool of consumerism, therefore those who identify themselves as modern men are no longer themselves but apparently no more than "Robot Man" impersonator without original identity, the principle of life pawned in the name of modernity. Women are vying to look beautiful, to buy up all whitening products, hair straightener tools, body slimming drugs, making them "Paranoid" who are restless because being haunted by old age. Actually they are aware of the exploitation, but enjoy it on the pretext of style and fashion. Key words: women, exploitation, mass media

  2. Catholic Media and Youth.

    Science.gov (United States)

    Nunes, Stephen A.

    1980-01-01

    Discusses the impact of media on youth and suggests some possible directions for the Catholic media, especially in the areas of textbooks, magazines, television, movies, and radio, in responding to the needs of youth. (Author/FM)

  3. Nurses and social media.

    Science.gov (United States)

    Farrelly, Rory

    Nurses' use of social media and other electronic communications has increased significantly with growing numbers of social media opportunities, platforms and applications including blogs, social networking sites, video sites and online chat rooms and forums.

  4. Media and Crime

    DEFF Research Database (Denmark)

    Agger, Gunhild; Waade, Anne Marit

    2011-01-01

    Recent developments in the relationship between media and crime are analyzed, taking both fiction and journalism in account......Recent developments in the relationship between media and crime are analyzed, taking both fiction and journalism in account...

  5. Development of contrast media

    International Nuclear Information System (INIS)

    Krause, W.

    1993-01-01

    Description of all contrast media (ionic and nonionic monomers, ionic and nonionic dimers) was presented. Chemotoxicity, osmolality and viscosity of some contrast agents were analyzed. The main adverse reactions to ionic and nonionic contrast media were described

  6. The social media revolution.

    Science.gov (United States)

    Dubose, Cheryl

    2011-01-01

    The growing popularity and use of social media tools such as Facebook, YouTube, Twitter, blogging, and wikis have led to a social media revolution. Given this widespread influence, it is important for educators, administrators, and technologists to understand the risks of using social media in the classroom and workplace. To investigate popular social media sites and their effect on radiologic technology education and business practices. A comprehensive search of literature was performed to examine social media and its applications in education, health care, and business. Social media use is on the rise, affecting all aspects of mainstream society. Leaders in the radiologic sciences should be familiar with social media and cognizant of its risks. Future studies regarding social media use in the radiologic sciences are necessary to determine its effect on the radiologic science community. ©2011 by the American Society of Radiologic Technologists.

  7. MODERN MEDIA EDUCATION MODELS

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2011-03-01

    Full Text Available The author supposed that media education models can be divided into the following groups:- educational-information models (the study of the theory, history, language of media culture, etc., based on the cultural, aesthetic, semiotic, socio-cultural theories of media education;- educational-ethical models (the study of moral, religions, philosophical problems relying on the ethic, religious, ideological, ecological, protectionist theories of media education;- pragmatic models (practical media technology training, based on the uses and gratifications and ‘practical’ theories of media education;- aesthetical models (aimed above all at the development of the artistic taste and enriching the skills of analysis of the best media culture examples. Relies on the aesthetical (art and cultural studies theory; - socio-cultural models (socio-cultural development of a creative personality as to the perception, imagination, visual memory, interpretation analysis, autonomic critical thinking, relying on the cultural studies, semiotic, ethic models of media education.

  8. Magnetic separations: From steel plants to biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Cafer T. Yavuz; Arjun Prakash; J.T. Mayo; Vicki L. Colvin [Rice University, Houston, TX (United States). Department of Chemistry

    2009-05-15

    Magnetic separations have for decades been essential processes in diverse industries ranging from steel production to coal desulfurization. In such settings magnetic fields are used in continuous flow processes as filters to remove magnetic impurities. High gradient magnetic separation (HGMS) has found even broader use in wastewater treatment and food processing. Batch scale magnetic separations are also relevant in industry, particularly biotechnology where fixed magnetic separators are used to purify complex mixtures for protein isolation, cell separation, drug delivery, and biocatalysis. In this review, we introduce the basic concepts behind magnetic separations and summarize a few examples of its large scale application. HGMS systems and batch systems for magnetic separations have been developed largely in parallel by different communities. However, in this work we compare and contrast each approach so that investigators can approach both key areas. Finally, we discuss how new advances in magnetic materials, particularly on the nanoscale, as well as magnetic filter design offer new opportunities for industries that have challenging separation problems.

  9. Asian Media Productions

    DEFF Research Database (Denmark)

    This work consists of 12 essays on different aspects of Asian media by Japanese, European, and American scholars, many of whom have themselves been involved in the production of media forms. Working in the fields of anthropology, media and cultural studies, and on the basis of hands-on research, ......, they have written a book on the social practices and cultural attitudes of people producing, reading, watching and listening to different kinds of media in Japan, China, Taiwan, Indonesia, Vietnam, Singapore and India....

  10. Advertising on social media

    OpenAIRE

    Sumit Goyal

    2013-01-01

    This communication reports the latest trends of advertising on social media. Social media advertising means to gain traffic or attention of online users through social media sites. Today, when a user thinks about buying something, he first comes to the internet, searches for that product, compares its price with other competing brands and takes a decision, which one to buy. In this write-up, author has discussed many aspects concerning advertising through social media, viz., what is social me...

  11. Procedural Media Representation

    OpenAIRE

    Henrysson, Anders

    2002-01-01

    We present a concept for using procedural techniques to represent media. Procedural methods allow us to represent digital media (2D images, 3D environments etc.) with very little information and to render it photo realistically. Since not all kind of content can be created procedurally, traditional media representations (bitmaps, polygons etc.) must be used as well. We have adopted an object-based media representation where an object can be represented either with a procedure or with its trad...

  12. Controversial Science and the Media

    Science.gov (United States)

    Riordon, James

    2012-03-01

    The possibility that the OPERA collaboration has detected superluminal neutrinos was among the most controversial topics in physics news in decades, and one of the most widely covered stories in all of science in 2011. Word of the research initially reached journalists and the public prior to publication in peer-reviewed journals. Understandably, many physicists are concerned that the significance of controversial science may be exaggerated or distorted when news organizations report on science at such an early stage. I will offer an overview of the ways the story was promoted by the media relations personnel, and outline the rationales that motivate media relations efforts along with the associated benefits and drawbacks that can result. Finally, I will examine the accuracy and completeness of the superluminal neutrino news stories that ultimately were made available to the general public.

  13. Media Education: Sociology Surveys

    Science.gov (United States)

    Fedorov, Alexander

    2007-01-01

    In Russia as well as in foreign countries we can witness sort of the confusion of the terms of "media education" and "media literacy". There are quite a few differences in theoretical approaches to media education, to distinguishing of the most important aims, objectives, means of introduction into the teaching process, etc.…

  14. Modern Media Education Models

    Science.gov (United States)

    Fedorov, Alexander

    2011-01-01

    The author supposed that media education models can be divided into the following groups: (1) educational-information models (the study of the theory, history, language of media culture, etc.), based on the cultural, aesthetic, semiotic, socio-cultural theories of media education; (2) educational-ethical models (the study of moral, religions,…

  15. Open Media Science

    DEFF Research Database (Denmark)

    Martiny, Kristian Møller Moltke; Pedersen, David Budtz; Hansted, Alfred Birkegaard

    2016-01-01

    and extend into a fully-fledged Open Media movement engaging with new media and non-traditional formats of science communication. We discuss two cases where experiments with open media have driven new collaborations between scientists and documentarists. We use the cases to illustrate different advantages...

  16. Children's Media Policy

    Science.gov (United States)

    Jordan, Amy B.

    2008-01-01

    Amy Jordan addresses the need to balance the media industry's potentially important contributions to the healthy development of America's children against the consequences of excessive and age-inappropriate media exposure. Much of the philosophical tension regarding how much say the government should have about media content and delivery stems…

  17. Social Media Empowerment (I)

    NARCIS (Netherlands)

    A. Cox

    2011-01-01

    full text via link. Social media stellen mensen, merken en bedrijven in staat om zichzelf te versterken. Soms wordt optimaal gebruik gemaakt van Social Media Empowerment, maar soms ook wat minder. Effectief inzetten van social media. Regel 1: Start met context en motivatie

  18. Youth media lifestyles

    NARCIS (Netherlands)

    van Kruistum, Claudia; Leseman, Paul Pm; de Haan, Mariëtte

    2014-01-01

    In this article, the concept of "media lifestyles" is adopted in order to develop a comprehensive approach toward youth engagement in communication media. We explore how 503 Dutch eighth grade students with full access to new technology combine a broad range of media by focusing on their engagement

  19. Sizing Up Social Media

    Science.gov (United States)

    Pearson, Jerold

    2010-01-01

    Most people are aware of the increasing importance of social media to institutional advancement, and many colleges and universities have started investing resources in these media. The next step is to measure the impact of social media on the institution and evaluate the success of one's efforts. Every advancement leader should understand how…

  20. The Media Reader.

    Science.gov (United States)

    Valdes, Joan; Crow, Jeanne

    An anthology of readings in the media correlates chapter-by-chapter to the authors' textbook, "The Media Works." Fifteen chapters cover the study of newspapers, magazines, comics, popular music, television, movies, and advertising. The authors included represent varied perspectives on the media. The selections were chosen with the help of a…

  1. Media and child development

    NARCIS (Netherlands)

    Piotrowski, J.T.; Vossen, H.G.M.; Valkenburg, P.M.; Wright, J.D.

    2015-01-01

    Decades of research have shown that the relationship between media and childhood is not unidirectional but reciprocal. In this article, both directions of the media-child development relationship are presented. We discuss how child development predisposes children's media use and preferences by

  2. Multisided Media Markets: Applying the Theory of Multisided Markets to Media Markets

    OpenAIRE

    Nadine Lindstädt

    2009-01-01

    Media markets recently have been identified as multisided markets. The application of the theory of multisided markets provides a better understanding of such markets. It enriched the hitherto economic approach and led to new insights and perspectives especially for the antitrust authorities when evaluating competition constraints and mergers. This paper reviews the theory of multisided markets and subsequently applies it to media markets. Finally the paper draws attention to the new perspect...

  3. Gas separation with membranes

    International Nuclear Information System (INIS)

    Schulz, G.; Michele, H.; Werner, U.

    1982-01-01

    Gas separation with membranes has already been tested in numerous fields of application, e.g. uranium enrichment of H 2 separation. In many of these processes the mass transfer units, so-called permeators, have to be connected in tandem in order to achieve high concentrations. A most economical operating method provides for each case an optimization of the cascades with regard to the membrane materials, construction and design of module. By utilization of the concentration gradient along the membrane a new process development has been accomplished - the continuously operating membrane rectification unit. Investment and operating costs can be reduced considerably for a number of separating processes by combining a membrane rectification unit with a conventional recycling cascade. However, the new procedure requires that the specifications for the module construction, flow design, and membrane properties be reconsidered. (orig.) [de

  4. Isotope separation process

    International Nuclear Information System (INIS)

    Lyon, R.K.

    1977-01-01

    The instant invention relates to a process for separating a material into two or more parts in each of which the abundances of the isotopes of a given element differ from the abundances of the isotopes of the same material in said material. More particularly, the invention relates to a method for the isotopically selective excitation of gas phase molecules by multiple infrared photon absorption followed by a step wherein more of the excited molecules than nonexcited molecules are converted to a chemically different form which may be separated by means known in the art. This invention is useful for, but not limited to, the separation of the principal isotopes of uranium. 15 claims, 1 figure

  5. Isotope separation process

    International Nuclear Information System (INIS)

    Thomas, W.R.L.

    1979-01-01

    The instant invention relates to an improved process for separating a material into two or more parts in each of which the abundances of the isotopes of a given element differ from the abundances of the isotopes of the same element in said material. More particularly, the invention relates to a method for the isotopically selective excitation of gas phase molecules by multiple infrared photon absorption followed by a step wherein more of the excited molecules than non-excited molecules are converted to a chemically different form which may be separated by means known in the art. This invention is useful for, but not limited to, the separation of the principal isotopes of uranium

  6. Separable quadratic stochastic operators

    International Nuclear Information System (INIS)

    Rozikov, U.A.; Nazir, S.

    2009-04-01

    We consider quadratic stochastic operators, which are separable as a product of two linear operators. Depending on properties of these linear operators we classify the set of the separable quadratic stochastic operators: first class of constant operators, second class of linear and third class of nonlinear (separable) quadratic stochastic operators. Since the properties of operators from the first and second classes are well known, we mainly study the properties of the operators of the third class. We describe some Lyapunov functions of the operators and apply them to study ω-limit sets of the trajectories generated by the operators. We also compare our results with known results of the theory of quadratic operators and give some open problems. (author)

  7. Immunoassay separation technique

    International Nuclear Information System (INIS)

    1977-01-01

    A method for effecting the immunoassay of a multiplicity of samples, each possibly containing an antigen or an antibody to be assayed, is discussed. Each sample is incubated with a solution containing a detectable antigen or antibody to form a multiplicity of mixtures, each mixture containing as components antigen-antibody, non-complexed antigen and non-complexed antibody. At least one of the components of the said mixture is separated by adsorption. There after, quantity of detectable antigen or antibody is detected in one of the non-adsorbed portions of the mixture. An improvement, compared to other techniques, is the continuous and sequential separation of at least one component, which is intended to be separated from each said multiplicity of mixtures

  8. Electromagnetic separator of plasma

    International Nuclear Information System (INIS)

    Gasilin, V.V.; Nezovibatko, Yu.N.; Poklepach, G.S.; Shvets, O.M.; Taran, V.S.; Tereshin, V.I.

    2005-01-01

    The progress in the widespread utilization of the PVD methods is determined in many respects by the plasma quality and, therefore, the necessity of an application of plasma separators, in particular magnetic separators. One needs to note that traditional magnetic separators have a number of problems their using, namely their unwieldiness, the presence of the isolated cameras and so on. We have proposed, manufactured and investigated the simple separator of plasma that doesn't require using additional cameras. As a source of metallic plasma the standard cathode vaporizer in the installation 'BULAT 6' was in use. Plasma stream from the cathode flowed through the not protected by isolation spiral solenoid. The solenoid input (from the cathode side) was under floating potential. The solenoid output was connected to the autonomous power supply system. The solenoid was prepared with stride winding and 90 degree turn. The solenoid current was 20-90 A and the solenoid voltage with respect to the vessel (earth) was +15 V. In this case drifting charged particles could freely fly out from the interior solenoid region to its boundary. The glow of the turned flow of plasma was observed during the supplying of the cathode and the solenoid. Plasma flow was separated from the coils and extended along the axis of solenoid. One can assume that this device ensures radial electric with respect to the bulk of plasma (the diameter of the bulk of plasma is comparable with the cathode diameter), the toroidal magnetic field, produced by solenoid, was of an order of 20 Oe. Magnetic field strength was sufficient for the magnetization of electrons, but it was rather small for magnetizing the ions and charged micro-droplets. The experiments carried out with aluminum cathode on the deposition of coatings at the stainless steel substrate have shown the high effectiveness of this separator operation. Coatings without droplets were obtained also on the glass substrate with HF- displacement

  9. Notes for media reinvention

    Directory of Open Access Journals (Sweden)

    Jesús Miguel Flores-Vivar

    2009-10-01

    Full Text Available Journalism and media are going through a change of era. This change is reflected in the transformation of journalism and media-lived and that another major in 1980 that became known as mediamorphosis, by this, professionals have to learn new roles. The impact of information technology and Internet has changed the way how you present the news and, most importantly, transform the business model that has characterized media companies. This article analyzes the current situation provides some strategic guidelines to be followed by some media-and-do and studied some of the new profiles arebeginning to emerge as a result of the reinvention of journalism and the media.

  10. Prosocial effects of media.

    Science.gov (United States)

    Hogan, Marjorie J

    2012-06-01

    Parents, teachers, health care providers, and other caring adults worry about the harmful influence of media messages and images on children and teens and wonder how to recognize and encourage positive and healthy use of media. For decades, experts have commented on the power of media. Media depictions can lead to negative attitudes and behavior in some young viewers. This article discusses whether prosocial, tolerant, and cooperative attitudes and behavior can be learned and imitated by children and adolescents and whether media can nurture or stimulate creativity or actively promote health and well-being in young consumers. Copyright © 2012 Elsevier Inc. All rights reserved.

  11. Representasi Wanita Dalam Media Massa Masa Kini

    Directory of Open Access Journals (Sweden)

    Errika Dwi Setya Watie

    2016-04-01

    Full Text Available Media audience, in general, using representation of women in the media to "see" women. How does the media show the figure of a woman often becomes references and examples used to assess women in general. Not only how man seeing woman, but women see themselves and other women see each other. This condition seemed to reinforce the encouragement of women to remain in the view of women in the past is loaded with socio-political. In many media, women are still portrayed as "mere body" related to sexuality. Besides the still dominant view that shows women as "a figure in the kitchen", the less equilibrate view that showing women in the intellectual and career figures, reinforce the representation of "traditional" women. And finally appeared in public perception will remain the same. Representation of woman according to the spirit of emancipation of women only appears in the commemoration of Kartini day, mothers day, and other momentum associated with women.

  12. Unity Through Separation

    DEFF Research Database (Denmark)

    Dabelsteen, Hans B.

    This PhD thesis asks how we can conceptualize the current separation doctrine of religion and politics in a country like Denmark, where the structure of the established church and peoplehood overlap. In order to answer this question, Hans Bruun Dabelsteen maps the current discussion of secularism...... into the principle of treating everybody equally (with religious freedom, equality and Danish peoplehood as the most important principles adjacent to secularism). In a study of the historical roots of the separation doctrine and two current policy cases (same-sex marriage and reforms of church governance...

  13. Separation membrane development

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M.W. [Savannah River Technology Center, Aiken, SC (United States)

    1998-08-01

    A ceramic membrane has been developed to separate hydrogen from other gases. The method used is a sol-gel process. A thin layer of dense ceramic material is coated on a coarse ceramic filter substrate. The pore size distribution in the thin layer is controlled by a densification of the coating materials by heat treatment. The membrane has been tested by permeation measurement of the hydrogen and other gases. Selectivity of the membrane has been achieved to separate hydrogen from carbon monoxide. The permeation rate of hydrogen through the ceramic membrane was about 20 times larger than Pd-Ag membrane.

  14. Gas separation membranes

    Science.gov (United States)

    Schell, William J.

    1979-01-01

    A dry, fabric supported, polymeric gas separation membrane, such as cellulose acetate, is prepared by casting a solution of the polymer onto a shrinkable fabric preferably formed of synthetic polymers such as polyester or polyamide filaments before washing, stretching or calendering (so called griege goods). The supported membrane is then subjected to gelling, annealing, and drying by solvent exchange. During the processing steps, both the fabric support and the membrane shrink a preselected, controlled amount which prevents curling, wrinkling or cracking of the membrane in flat form or when spirally wound into a gas separation element.

  15. Separation techniques: Chromatography

    Science.gov (United States)

    Coskun, Ozlem

    2016-01-01

    Chromatography is an important biophysical technique that enables the separation, identification, and purification of the components of a mixture for qualitative and quantitative analysis. Proteins can be purified based on characteristics such as size and shape, total charge, hydrophobic groups present on the surface, and binding capacity with the stationary phase. Four separation techniques based on molecular characteristics and interaction type use mechanisms of ion exchange, surface adsorption, partition, and size exclusion. Other chromatography techniques are based on the stationary bed, including column, thin layer, and paper chromatography. Column chromatography is one of the most common methods of protein purification. PMID:28058406

  16. Isotope separation process

    International Nuclear Information System (INIS)

    1976-01-01

    The invention relates to a process for separating a given material into two or more parts, in each of which the abundances of the isotopes of a given element differ from the abundances of the isotopes of the same material in the said material. More particularly, the invention relates to a method for the isotopically selective excitation of gas phase UF 6 by infrared photon absorption followed by selective reaction of said excited UF 6 with atomic chlorine, bromine, or iodine to form a product which may be separated by means known in the art

  17. SEPARATION PHENOMENA LOGISTIC REGRESSION

    Directory of Open Access Journals (Sweden)

    Ikaro Daniel de Carvalho Barreto

    2014-03-01

    Full Text Available This paper proposes an application of concepts about the maximum likelihood estimation of the binomial logistic regression model to the separation phenomena. It generates bias in the estimation and provides different interpretations of the estimates on the different statistical tests (Wald, Likelihood Ratio and Score and provides different estimates on the different iterative methods (Newton-Raphson and Fisher Score. It also presents an example that demonstrates the direct implications for the validation of the model and validation of variables, the implications for estimates of odds ratios and confidence intervals, generated from the Wald statistics. Furthermore, we present, briefly, the Firth correction to circumvent the phenomena of separation.

  18. Radiation gradient isotope separator

    International Nuclear Information System (INIS)

    Hughes, J.L.

    1980-01-01

    A system is described for transporting, separating and storing charged particles, charged antiparticles and fully or partially ionized isotopes of any element comprising a laser beam generator, laser beam intensity profiler, a laser beam variable intensity attenuator, and means for injecting charged particles, charged antiparticles and ionized isotopes into the beam and extracting them from the system as required. The invention is particularly useful for channelling electrons and ions used for fuel pellet compression in inertial fusion systems, for separating the isotopes of elements and for the confinement of charged antiparticles and particle/antiparticle plasmas

  19. Organic separations with membranes

    International Nuclear Information System (INIS)

    Funk, E.W.

    1993-01-01

    This paper presents an overview of present and emerging applications of membrane technology for the separation and purification of organic materials. This technology is highly relevant for programs aimed at minimizing waste in processing and in the treatment of gaseous and liquid effluents. Application of membranes for organic separation is growing rapidly in the petrochemical industry to simplify processing and in the treatment of effluents, and it is expected that this technology will be useful in numerous other industries including the processing of nuclear waste materials

  20. Isotope separation process

    International Nuclear Information System (INIS)

    Lyon, R.K.

    1976-01-01

    The instant invention relates to a process for separating a material into two or more parts in each of which the abundances of the isotopes of a given element differ from the abundances of the isotopes of the same material in said material. In one embodiment, the invention relates to a method for the isotopically selective excitation of gas phase molecules by multiple infrared photon absorption followed by selective dissociation of said excited molecules by the absorption of a single photon of visible or ultraviolet light. This invention is useful for, but not limited to, the separation of the principal isotopes of uranium. 11 Claims, 2 Drawing Figures

  1. Assessment of the usage of social media among agricultural ...

    African Journals Online (AJOL)

    It is recommended that the extension workers should be paid befitting salaries to boost their morale and encouraged to open multiple social media accounts, to take advantage of the benefits provided by social media to improve their knowledge level and finally, the Government should put more efforts in power generation ...

  2. Comprehension of digital media

    International Nuclear Information System (INIS)

    Kim, Ju Hwan

    2008-11-01

    This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

  3. Radiographic contrast media

    International Nuclear Information System (INIS)

    Golman, K.; Holtz, E.; Almen, T.

    1987-01-01

    Contrast media are used in diagnostic radiology to enhance the X-ray attenuation between a body structure of interest and the surrounding tissue. A detail becomes perceptible on a roentgenogram only when its contrast exceeds a minimum value in relation to the background. Small areas of interest must have higher contrast than the background. The contrast effect depends on concentration of the contrast media with the body. A high contrast media concentration difference thus gives rise to more morphological details in the radiographs. Contrast media can be divided into negative contrast media such as air and gas which attenuate X-rays less than the body tissues, and positive contrast materials which attenuate X-rays more than the body tissues. The positive contrast media all contain either iodine (atomic number 53) or barium (atomic number 56) and can be divided into water-insoluble and water-soluble contrast media

  4. Comprehension of digital media

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Hwan

    2008-11-15

    This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

  5. Extraction and Separation of Uranium (VI) and Thorium (IV) Using Tri-n-dodecylamine Impregnated Resins

    International Nuclear Information System (INIS)

    Metwally, E.; Saleh, A.Sh.; El-Naggar, H.A.

    2005-01-01

    Extraction of U(VI) and Th(IV) from chloride and nitrate solutions with tri-n- dodecylamine impregnated on Amberlite XAD4, was investigated. The distribution of U(VI) and Th(IV) was studied at different concentrations of acid, salting-out agent, extractant, aqueous metal ion and other parameters. Absorption spectral studies have been investigated for uranium species in both aqueous HCl solution and the resin phase. From these studies, it is suggested that the tetrachloro complex of U(VI) is formed in the extraction of uranium (VI) from hydrochloric acid solutions by TDA impregnated resin. Stripping of the extracted U(VI) and Th(IV) was assayed with HCl and HNO 3 . Finally, the separation of uranium from thorium and fission products in HCl media was achieved

  6. Media:Time card stack

    NARCIS (Netherlands)

    Annemarie Wennekers; Jos de Haan; Frank Huysmans

    2016-01-01

    Original title: Media:Tijd in kaart The Dutch spend a daily average of 8 hours 33 minutes using media. Men and people aged over 50 spend most time using media, at an average of 9 hours per day. Older media users prefer traditional media and devices over new media and modern devices. Young and

  7. Emphasis on the Impact of Asynchronous Media

    African Journals Online (AJOL)

    ICTs and their utilization is one of the most pertinent issues in the education industry today. ... The paper pointed out specific impact of asynchronous ICT media in ... The paper finally noted that the struggle to be part of the digital world is ...

  8. Radiochemical separation of Tb-149 after tandem accelerator production

    International Nuclear Information System (INIS)

    Sarkar, S.R.

    1996-01-01

    Full text: Terbium-149 is produced by the heavy ion induced reaction of the type 142 Nd( 12 C,5n) 149 Dy→ 149 Tb. This work concerns the separation of terbium from neodymium target, and other lanthanides produced by secondary reactions on neodymium target. Firstly, anion-exchange separation is carried out at room temperature using acid-alcohol media (90% methanol-10% 5M nitric acid) as eluent. But the separation is not satisfactory. To achieve satisfactory separation, cation exchange separation is performed under pressure at room temperature using 0.1 6M α-hydroxyisobutyric acid of pH 5 as eluent. The pressure is exerted from a nitrogen gas cylinder. The simplicity and efficacy of this method for the separation of terbium are discussed in comparison with the commercially available high performance liquid chromatography system

  9. Understanding Social Media Logic

    Directory of Open Access Journals (Sweden)

    José van Dijck

    2013-08-01

    Full Text Available Over the past decade, social media platforms have penetrated deeply into the mech­anics of everyday life, affecting people's informal interactions, as well as institutional structures and professional routines. Far from being neutral platforms for everyone, social media have changed the conditions and rules of social interaction. In this article, we examine the intricate dynamic between social media platforms, mass media, users, and social institutions by calling attention to social media logic—the norms, strategies, mechanisms, and economies—underpin­ning its dynamics. This logic will be considered in light of what has been identified as mass me­dia logic, which has helped spread the media's powerful discourse outside its institutional boundaries. Theorizing social media logic, we identify four grounding principles—programmabil­ity, popularity, connectivity, and datafication—and argue that these principles become increas­ingly entangled with mass media logic. The logic of social media, rooted in these grounding principles and strategies, is gradually invading all areas of public life. Besides print news and broadcasting, it also affects law and order, social activism, politics, and so forth. Therefore, its sustaining logic and widespread dissemination deserve to be scrutinized in detail in order to better understand its impact in various domains. Concentrating on the tactics and strategies at work in social media logic, we reassess the constellation of power relationships in which social practices unfold, raising questions such as: How does social media logic modify or enhance ex­isting mass media logic? And how is this new media logic exported beyond the boundaries of (social or mass media proper? The underlying principles, tactics, and strategies may be relat­ively simple to identify, but it is much harder to map the complex connections between plat­forms that distribute this logic: users that employ them, technologies that

  10. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on first term final research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo (daiikki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-30

    The first term has performed research and development placing emphasis on that 'the basic study on membrane separation is to be performed systematically to elucidate governing factors in membrane separation'. With respect to water/ethanol separation by using the penetration gasifying method, it was indicated that excellent separation performance can be exhibited by using natural polymers having sugar chain skeleton as a raw material, and by controlling the membrane structure by means of membrane manufacturing methods. For enhancement of performance in water selective permeation type separation membrane, it was shown experimentally that it is important to select a membrane suitable for the object of separation and a separation method that uses the selected membrane. Regarding the water/ethanol separation, it was shown theoretically that the penetration gasifying method can save more energy than the conventional distillation method, where the development target was presented. It was recognized that impregnation type liquid membrane using crown ether can separate amino acid optical isomers. High separation performance was obtained in carbon monoxide/nitrogen separation by using fluid carrier that uses cuprous iodine/1-methyl imidazole. (NEDO)

  11. New Fragment Separation Technology for Superheavy Element Research

    International Nuclear Information System (INIS)

    Shaughnessy, D A; Moody, K J; Henderson, R A; Kenneally, J M; Landrum, J H; Lougheed, R W; Patin, J B; Stoyer, M A; Stoyer, N J; Wild, J F; Wilk, P A

    2008-01-01

    interference from other background species [16]. The final aspect of this project was the production of new isotopes and elements. All of the experiments were performed in Dubna at the U400 Cyclotron and the results are described in more detail in Refs. [2,3,5-8,11,12,14]. The first experiments were designed to establish the decay properties of isotopes of elements 112, 114, and 116 [5]. Because these isotopic signatures were established through these initial experiments, the discovery of element 118 [11] was possible, since the 118 nuclides decayed into these previously studied isotopes. This was the first successful report of the discovery of element 118, which was reported by the media to a large extent. The last experiment that was performed for this project was the production and detection of a new isotope of element 113 [14

  12. Fathering After Marital Separation

    Science.gov (United States)

    Keshet, Harry Finkelstein; Rosenthal, Kristine M.

    1978-01-01

    Deals with experiences of a group of separated or divorced fathers who chose to remain fully involved in the upbringing of their children. As they underwent transition from married parenthood to single fatherhood, these men learned that meeting demands of child care contributed to personal stability and growth. (Author)

  13. Isotope separator laoratory development

    International Nuclear Information System (INIS)

    Anderl, R.A.

    1977-01-01

    Significant improvements in the capability for collection of mass-separated ions are described. These improvements centered on the fabrication and installation of a more versatile collection-beam viewing system and the design, fabrication, installation and testing of a retardation lens. A summary description of this capability development is presented

  14. Separation of Powers.

    Science.gov (United States)

    Bill of Rights in Action, 1987

    1987-01-01

    The dimensions of the separation of powers principle are explored through three lessons in the subject areas of U.S. history, U.S. government, and world history. In 1748, a French nobleman, Baron de Montesquieu, wrote a book called "The Spirit of the Laws," in which he argued that there could be no liberty when all government power was…

  15. Polymide gas separation membranes

    Science.gov (United States)

    Ding, Yong; Bikson, Benjamin; Nelson, Joyce Katz

    2004-09-14

    Soluble polyamic acid salt (PAAS) precursors comprised of tertiary and quaternary amines, ammonium cations, sulfonium cations, or phosphonium cations, are prepared and fabricated into membranes that are subsequently imidized and converted into rigid-rod polyimide articles, such as membranes with desirable gas separation properties. A method of enhancing solubility of PAAS polymers in alcohols is also disclosed.

  16. Industrial separation processes : fundamentals

    NARCIS (Netherlands)

    Haan, de A.B.; Bosch, Hans

    2013-01-01

    Separation processes on an industrial scale comprise well over half of the capital and operating costs. They are basic knowledge in every chemical engineering and process engineering study. This book provides comprehensive and fundamental knowledge of university teaching in this discipline,

  17. diffusive phase separation

    Directory of Open Access Journals (Sweden)

    Nobuyuki Kenmochi

    1996-01-01

    w is constrained to have double obstacles σ*≤w≤σ* (i.e., σ* and σ* are the threshold values of w. The objective of this paper is to discuss the semigroup {S(t} associated with the phase separation model, and construct its global attractor.

  18. Separation of uranium isotopes

    International Nuclear Information System (INIS)

    Ehrfeld, W.; Ehrfeld, U.

    1977-01-01

    In the nuclear fuel cycle, uranium enrichment is not a principal problem of technological feasibility. Several processes exist for producing LWR fuel and the enrichment method can be selected in consideration of economical, environmental, and political aspects. To date, the gaseous diffusion process constitutes the major part of enrichment capacity. This process has been well demonstrated for over 30 years and, as a matter of fact, no major technological and economical progress is to be expected in the future. Because of their comparatively high development potential, the centrifuge and the separation nozzle method may become increasingly favorable in economics. The development of the centrifuge process which is superior by its low specific energy consumption aims at technological improvements. In the separation nozzle process which offers the advantage of a comparatively simple technology a further reduction of the specific energy consumption is to be expected because of the thermodynamically favorable separation mechanism of this process. Laser isotope separation methods are still on the laboratory scale, although large financial funds have been spent. (orig.) [de

  19. Oily Bilgewater Separators

    Science.gov (United States)

    2011-11-01

    11 3.3.4 Flotation ...Flocculation, • Flotation , and • Ultrafiltration . EPA evaluated the effectiveness of bilge separators by their ability to achieve low effluent oil...parameters, suspended solids), metals (arsenic, copper , cadmium, chromium, lead, mercury, selenium and zinc) and organics (benzene, chloroform

  20. Separation problems and forcing

    Czech Academy of Sciences Publication Activity Database

    Zapletal, Jindřich

    2013-01-01

    Roč. 13, č. 1 (2013), s. 1350002 ISSN 0219-0613 R&D Projects: GA AV ČR IAA100190902 Institutional research plan: CEZ:AV0Z10190503 Keywords : separation * set of uniqueness * forcing Subject RIV: BA - General Mathematics Impact factor: 0.364, year: 2012 http://www.worldscientific.com/doi/abs/10.1142/S0219061313500025

  1. Radioactive krypton gas separation

    International Nuclear Information System (INIS)

    Martin, J.R.

    1976-01-01

    Radioactive krypton is separated from a gas mixture comprising nitrogen and traces of carbon dioxide and radioactive krypton by selective adsorption and then cryogenic distillation of the prepurified gas against nitrogen liquid to produce krypton bottoms concentrate liquid, using the nitrogen gas from the distillation for two step purging of the adsorbent. 16 Claims, 8 Drawing Figures

  2. Centrifugal separator. [for production of enriched U

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, J; Fujita, S I

    1970-02-25

    In a centrifugal separator of the concurrent flow through type, a rotating member having an inner and outer cylinder with an air gap therebetween is supported within a frame. A mixture to be separated is supplied to the interior of the inner cylinder through a hollow shaft inserted coaxially within the rotatable portion of a driving apparatus, with one end of the rotatable portion attached to the common inlet end cap of the cylinders which are thereby rotated. There are provided holes at the upper end of the inner cylinder through which the mixture enters the air gap to undergo separation, with the thus separated lighter component entering a separate chamber at the lower end of the inner cylinder through holes provided therein to thereafter be discharged from the outlet end thereof, while the heavier component is discharged from the outlet end of the outer cylinder through holes provided therein. The separated gases then enter their respective chambers within the frame for final removal where they are isolated from each other by sealing means to prevent remixture. Efficiency is heightened and, since no other complicated means are necessary for dividing and removing the separated components, the structure of the present centrifuge can be simplified and reduced in size.

  3. Mineralogy and geochemistry of density-separated Greek lignite fractions

    NARCIS (Netherlands)

    Iordanidis, A.; Doesburg, van J.D.J.

    2006-01-01

    In this study, lignite samples were collected from the Ptolemais region, northern Greece, homogenized, crushed to less than I nun, and separated in three density fractions using heavy media. The mineralogical investigation of the density fractions showed a predominance of pyrite in the light

  4. Separation of Process Water using Hydroxy Sodalite Membranes

    NARCIS (Netherlands)

    Khajavi, S.

    2010-01-01

    This thesis describes the synthesis, characterization, and application of Hydroxy Sodalite (H-SOD) membranes in selective separation of water from aqueous solutions and reaction media. The emphasis has been put on the development of a tight membrane film that could be primarily used for water

  5. Leaving work at work: a balanced, compassionate, separate home life.

    Science.gov (United States)

    Mendes, Aysha

    We all know it's important to keep our work and home lives separate, but in an age of new media, of being constantly 'on', how can we do this in practice? These issues are even more acute for nurses, argues Aysha Mendes, since the emotional nature of their work makes 'switching off' all the harder.

  6. Separation science and technology

    International Nuclear Information System (INIS)

    Smith, B.F.; Sauer, N.; Chamberlin, R.M.; Gottesfeld, S.; Mattes, B.R.; Li, D.Q.; Swanson, B.

    1998-01-01

    The focus of this project is the demonstration and advancement of membrane-based separation and destruction technologies. The authors are exploring development of membrane systems for gas separations, selective metal ion recovery, and for separation or destruction of hazardous organics. They evaluated existing polymers and polymer formulations for recovery of toxic oxyanionic metals such as chromate and arsenate from selected waste streams and developed second-generation water-soluble polymeric systems for highly selective oxyanion removal and recovery. They optimized the simultaneous removal of radioactive strontium and cesium from aqueous solutions using the new nonhazardous separations agents, and developed recyclable, redox-active extractants that permitted recovery of the radioactive ions into a minimal waste volume. They produced hollow fibers and fabricated prototype hollow-fiber membrane modules for applications to gas separations and the liquid-liquid extraction and recovery of actinides and nuclear materials from process streams. They developed and fabricated cyclodextrin-based microporous materials that selectively absorb organic compounds in an aqueous environment; the resultant products gave pure water with organics at less than 0.05 parts per billion. They developed new, more efficient, membrane-based electrochemical reactors for use in organic destruction in process waste treatment. They addressed the need for advanced oxidation technologies based on molecular-level materials designs that selectively remove or destroy target species. They prepared and characterized surface-modified TiO 2 thin films using different linking approaches to attach ruthenium photosensitizers, and they started the measurement of the photo-degradation products generated using surface modified TiO 2 films in reaction with chlorophenol

  7. Transport in Stochastic Media

    International Nuclear Information System (INIS)

    Haran, O.; Shvarts, D.; Thieberger, R.

    1998-01-01

    Classical transport of neutral particles in a binary, scattering, stochastic media is discussed. It is assumed that the cross-sections of the constituent materials and their volume fractions are known. The inner structure of the media is stochastic, but there exist a statistical knowledge about the lump sizes, shapes and arrangement. The transmission through the composite media depends on the specific heterogeneous realization of the media. The current research focuses on the averaged transmission through an ensemble of realizations, frm which an effective cross-section for the media can be derived. The problem of one dimensional transport in stochastic media has been studied extensively [1]. In the one dimensional description of the problem, particles are transported along a line populated with alternating material segments of random lengths. The current work discusses transport in two-dimensional stochastic media. The phenomenon that is unique to the multi-dimensional description of the problem is obstacle bypassing. Obstacle bypassing tends to reduce the opacity of the media, thereby reducing its effective cross-section. The importance of this phenomenon depends on the manner in which the obstacles are arranged in the media. Results of transport simulations in multi-dimensional stochastic media are presented. Effective cross-sections derived from the simulations are compared against those obtained for the one-dimensional problem, and against those obtained from effective multi-dimensional models, which are partially based on a Markovian assumption

  8. Final Report: Air Purification: Nanostructured Media for Individual Protection

    Science.gov (United States)

    linker. A main focus of this overall work was to evaluate MOFs for selective removal of ammonia from air . We found that UiO-66-OH has a capacity of...and high selectivity and high capacity for ammonia is crucial to developing new adsorbents for ammonia removal from air .

  9. Promoting Media Literacy’ as Practicing “Media Reform”: Reflecting on Personal Experiences

    Directory of Open Access Journals (Sweden)

    Hui-Ju Tsai

    2016-04-01

    Full Text Available This paper assesses conceptions and practices in critical media literacy. In particular, it focuses on teaching experience and the processes which combine the educator’s reflection of theories of the ‘public sphere’, ‘media literacy’, and ‘communication civil rights’. The paper is divided into three main parts. The first of four sections will briefly cover the history of media reform and the relationship between the media reform movement and critical media literacy lessons in community colleges. It will connect this to the idea of ‘turn to the public’. The meaning and position of ‘media literacy’ in the broad media reform movement will also be analyzed. Following this, in the second section, conceptualizations of the ‘public sphere’, ‘public pedagogy’, and ‘critical media literacy pedagogy’ will be developed. Finally, three stages of the lesson design and practical interactions will be examined dialectically. In particular, the community college field research on my teaching experience will be described in the third section, and the suggestions, reflections and conclusions from the research will be examined in the last section.

  10. Media relations after the introduction of social media

    OpenAIRE

    Mesila, Helin

    2010-01-01

    In the light of the popularity of social media on one hand, and the contradictive relationships between journalists and public relations practitioners on the other hand, the thesis studies media relations after the introduction of social media. The study focuses on media relations in Estonian public relations scenery. The research answers to the questions: - What are media relations today? - What are the functions of social media and media relations in organizational communication? ...

  11. Media education and media enlightenment as attributes of information society

    Directory of Open Access Journals (Sweden)

    Лилия Борисовна Белоглазова

    2014-12-01

    Full Text Available The article deals with the problem of the functioning of media-education and media-enlightenment in modern society. Focuses on the impact of this socio-cultural phenomenon on consciousness of members of the Information Society. Are the main characteristics of media-education and media-education and media-enlightenment. Concludes that media-education and media-enlightenment forms unscientific and anti-scientific thinking and style speech.

  12. Strategi Media Relations Humas PT. Pelabuhan Indonesia III Dalam Handling Crisis Pemberitaan

    OpenAIRE

    RM, Agesty Sabreyna; Moertijoso, R. Bambang

    2015-01-01

    Media Relations was a requirement for Public Relation practitioners thatPR had an important role in a relationship with media. It was because thetask of public relation was the mass media and journalist. PT PelabuhanIndonesia III (Persero) as a State-owned enterprised cannot separate withthe crisis news. The strategy of media relations was very important to handlethe negative publicity because it could affect a company’s image.This research used qualitative descriptive method with data collec...

  13. Magnetically Separable Fe3O4@DOPA-Pd: A Heterogeneous Catalyst for Aqueous Heck Reaction

    Science.gov (United States)

    Magnetically separable Fe3O4@DOPA-Pd catalyst has been synthesized via anchoring of palladium over dopamine-coated magnetite via non-covalent interaction and the catalyst is utilized for expeditious Heck coupling in aqueous media.

  14. Home media server content management

    Science.gov (United States)

    Tokmakoff, Andrew A.; van Vliet, Harry

    2001-07-01

    With the advent of set-top boxes, the convergence of TV (broadcasting) and PC (Internet) is set to enter the home environment. Currently, a great deal of activity is occurring in developing standards (TV-Anytime Forum) and devices (TiVo) for local storage on Home Media Servers (HMS). These devices lie at the heart of convergence of the triad: communications/networks - content/media - computing/software. Besides massive storage capacity and being a communications 'gateway', the home media server is characterised by the ability to handle metadata and software that provides an easy to use on-screen interface and intelligent search/content handling facilities. In this paper, we describe a research prototype HMS that is being developed within the GigaCE project at the Telematica Instituut . Our prototype demonstrates advanced search and retrieval (video browsing), adaptive user profiling and an innovative 3D component of the Electronic Program Guide (EPG) which represents online presence. We discuss the use of MPEG-7 for representing metadata, the use of MPEG-21 working draft standards for content identification, description and rights expression, and the use of HMS peer-to-peer content distribution approaches. Finally, we outline explorative user behaviour experiments that aim to investigate the effectiveness of the prototype HMS during development.

  15. Separation of Nanoparticles in Aqueous Multiphase Systems through Centrifugation

    KAUST Repository

    Akbulut, Ozge; Mace, Charles R.; Martinez, Ramses V.; Kumar, Ashok A.; Nie, Zhihong; Patton, Matthew R.; Whitesides, George M.

    2012-01-01

    This paper demonstrates the use of aqueous multiphase systems (MuPSs) as media for rate-zonal centrifugation to separate nanoparticles of different shapes and sizes. The properties of MuPSs do not change with time or during centrifugation; this stability facilitates sample collection after separation. A three-phase system demonstrates the separation of the reaction products (nanorods, nanospheres, and large particles) of a synthesis of gold nanorods, and enriches the nanorods from 48 to 99% in less than ten minutes using a benchtop centrifuge. © 2012 American Chemical Society.

  16. Separation of Nanoparticles in Aqueous Multiphase Systems through Centrifugation

    KAUST Repository

    Akbulut, Ozge

    2012-08-08

    This paper demonstrates the use of aqueous multiphase systems (MuPSs) as media for rate-zonal centrifugation to separate nanoparticles of different shapes and sizes. The properties of MuPSs do not change with time or during centrifugation; this stability facilitates sample collection after separation. A three-phase system demonstrates the separation of the reaction products (nanorods, nanospheres, and large particles) of a synthesis of gold nanorods, and enriches the nanorods from 48 to 99% in less than ten minutes using a benchtop centrifuge. © 2012 American Chemical Society.

  17. Separation of UO2 powder

    International Nuclear Information System (INIS)

    Ristic, M.M.

    1962-01-01

    This report deals with theoretical approach to separation process and describes the constructed separator with liquid medium. The separator was calibrated and tested with Al 3 O 3 and UO 2 . it has been concluded that it can be used for separation of powders with sufficient accuracy if the separation is performed for a longer period of time. The separated fractions were characterised by microscopic method and the UO 2 fraction additionally by sedimentation method

  18. Novel reprocessing methods with nuclide separation for volume reduction of high level radioactive waste

    International Nuclear Information System (INIS)

    Suzuki, Tatsuya

    2015-01-01

    We have proposed the reprocessing system with nuclide separation processes based on the chromatographic technique in the hydrochloric acid solution system. Our proposing system consists of the dissolution process, the reprocessing process, the MA separation process, and nuclide separation processes. In our proposing processes, the pyridine resin is used as a main separation media. We expect that our proposing will contribute to that volume reduction of high level radioactive waste by combining the transmutation techniques, usage of valuable elements, and so on. (author)

  19. Isotope separation process

    International Nuclear Information System (INIS)

    Kaldor, A.; Rabinowitz, P.

    1979-01-01

    A method of separating the isotopes of an element is described, which comprises the steps of (i) subjecting molecules of a gaseous compound of the element simultaneously to two infrared radiations of different wavelengths, the first radiation having a wavelength which corresponds to an absorption band of the compound, which in turn corresponds to a mode of molecular motion in which there is participation by atoms of the element, and the second radiation having a power density greater than 10 6 watts per cm 2 , thereby exciting molecules of the compound in an isotopically selective manner, this step being conducted in such manner that the excited molecules either receive a level of energy sufficient to cause them to undergo conversion by unimolecular decomposition or receive a level of energy sufficient to cause them to undergo conversion by reaction with molecules of another gas present for that purpose; and (ii) separating and recovering converted molecules from unconverted molecules. (author)

  20. Process for isotope separation

    International Nuclear Information System (INIS)

    Emile, B.F.M.

    1983-11-01

    A process is claimed for isotopic separation applied to isotopes of elements that can be placed in at least a physicochemical form in which the isotopic atoms or the molecules containing these atoms can be easily displaced and for which there are selective radiations preferentially absorbed by the isotopes of a certain type or by the molecules containing them, said absorption substantially increasing the probability of ionization of said atoms or molecules relative to the atoms or molecules that did not absorb the radiation. The process consists of placing the isotopic mixture in such a form, subjecting it in a separation zone to selective radiations and to an electrical field that produces migration of positive ions toward the negative electrodes and negative ions toward the positive electrodes, and withdrawing from certain such zones the fractions thus enriched in certain isotopes

  1. High gradient magnetic separation

    International Nuclear Information System (INIS)

    Prothero, D.H.

    1982-01-01

    In a process in which magnetic material is trapped in a filter disposed in a magnetic field, and is unloaded by passing a fluid through the filter in the absence of the initial magnetic field, the magnetic field is first reduced to an intermediate value to allow unloading of the more weakly magnetic particles, the more strongly magnetic particles being retained and subsequently unloaded by further reduction of the magnetic field. Stage by stage reduction of the magnetic field during unloading allows separation of different species from the mixture. As an example the method can be applied to the separation of uranium compounds from mine ores. The uranium compounds are magnetic, while most of the other constituents of the ore are non-magnetic. The starting material is a suspension of the ore. Water is used for unloading. The filter material in this case is stainless steel balls. (author)

  2. Materials separation and enrichment

    International Nuclear Information System (INIS)

    1987-01-01

    This volume supplies information in 16 individual contributions on projects sponsored by the Federal Ministry for Research and Technology (BMFT) with regard to the above mentioned topic, on the state of the art, on new technologies, and on international cooperation; two of the contributions have been recorded separately for the databases INIS and ENERGY. The contributions are supplemented by a survey of the projects sponsored and by a list of publications which have resulted from the sponsored projects. (EF) [de

  3. Laser isotope separation

    International Nuclear Information System (INIS)

    1976-01-01

    The claimed invention is a method of isotope separation based on the unimolecular decomposition of vibrationally excited negative ions which are produced in the reaction of thermal electrons and molecules which have been vibrationally excited in an isotope selective manner. This method is especially applicable to molecules represented by the formula MF 6 wherein M is selected from the group consisting of U, S, W, Se, Te, Mo, Re and Tc

  4. Laser isotope separation process

    International Nuclear Information System (INIS)

    Kaldor, A.

    1976-01-01

    The claimed invention is a method of isotope separation based on the unimolecular decomposition of vibrationally excited negative ions which are produced in the reaction of thermal electrons and molecules which have been vibrationally excited in an isotope selective manner. This method is especially applicable to molecules represented by the formula MF 6 wherein M is selected from the group consisting of U, S, W, Se, Te, Mo, Re, and Tc. 9 claims, 1 drawing figure

  5. Eddy energy separator

    Energy Technology Data Exchange (ETDEWEB)

    Mukhutdinov, R.Kh.; Prokopov, O.I.

    1982-01-01

    An eddy energy separator is proposed which contains a chamber with nozzle input of compressed air and sleeves for cold and hot streams. In order to increase productivity, the chamber is cylindrical and the nozzle input is arranged along its axis. Coaxially to the input, there is an adaptor forming an annular channel with its end arranged in an angle to the axis of the chamber. The nozzle input and the adaptor are installed with the possibility of relative movement.

  6. URANIUM SEPARATION PROCESS

    Science.gov (United States)

    Lyon, W.L.

    1962-04-17

    A method of separating uranium oxides from PuO/sub 2/, ThO/sub 2/, and other actinide oxides is described. The oxide mixture is suspended in a fused salt melt and a chlorinating agent such as chlorine gas or phosgene is sparged through the suspension. Uranium oxides are selectively chlorinated and dissolve in the melt, which may then be filtered to remove the unchlorinated oxides of the other actinides. (AEC)

  7. Organizational Communication and Media

    DEFF Research Database (Denmark)

    Tække, Jesper

      The paper reflects an interest in the relation between organizational communication and media. It tries to answer the question, how we can observe the relationship between organizational communication and media. It is a work-in-progress which tries to combine organizational studies inspired...... of Niklas Luhmann (Tække & Paulsen 2008, Tække 2008a) with analysis of how organizations communicate in and about media. Using systems theory and form theory, it puts forward a theoretical framework and a strategy for analysing organisational communication in and about media. The medium aspect is inspired...... is a possible framework to draw the two disciplines together in, because it is a theory about the relation between the social and the media it is based on. First the paper sum up the Luhmann inspired theory about organizations, fleshing out how organizations are thought to communicate in and about media and how...

  8. Social media visibility

    DEFF Research Database (Denmark)

    Uldam, Julie

    2018-01-01

    of activists remains under-researched. This article examines BP’s surveillance of activists who criticise the company’s corporate social responsibility (CSR) programme as ‘greenwashing’. In this way, it goes beyond corporations’ uses of big data and instead explores how they monitor and discuss strategies......As activists move from alternative media platforms to commercial social media platforms, they face increasing challenges in protecting their online security and privacy. While government surveillance of activists is well-documented in scholarly research and the media, corporate surveillance...... for responding to the activities of individual activists in social media. It shows that while social media afford an unprecedented level of visibility for activists, it comes with the risk of being monitored by corporations. Theoretically, it draws on conceptions of visibility in social sciences and media...

  9. Abortion in the media.

    Science.gov (United States)

    Conti, Jennifer A; Cahill, Erica

    2017-12-01

    To review updates in how abortion care is depicted and analysed though various media outlets: news, television, film, and social media. A surge in recent media-related abortion research has recognized several notable and emerging themes: abortion in the news media is often inappropriately sourced and politically motivated; abortion portrayal in US film and television is frequently misrepresented; and social media has a new and significant role in abortion advocacy. The portrayal of abortion onscreen, in the news, and online through social media has a significant impact on cultural, personal, and political beliefs in the United States. This is an emerging field of research with wide spread potential impact across several arenas: medicine, policy, public health.

  10. Internal Social Media

    DEFF Research Database (Denmark)

    Madsen, Vibeke Thøis

    2018-01-01

    Internal social media is a web-based communication arena that provides all organizational members with a communication opportunity. The media has emerged in organizations since 2004, and is increasingly seen as a way of giving employees a voice in organizations which can benefit the organization...... in terms of knowledge sharing, collaboration, and employee participation and engagement. The first wave of studies of internal social media was primarily from an information-systems perspective and focused more on its adoption, its affordances, and the outcome of its introduction. The second wave...... of studies was more concerned with studying the dynamics of communication on internal social media, in order to understand coworkers as strategic communicators and how communication on internal social media can constitute the organization. With a successful introduction of internal social media, coworkers...

  11. New Media, New Citizens?

    DEFF Research Database (Denmark)

    Ohme, Jakob

    as for different age groups, the thesis shows that digital and especially social media use can be a strong driver of citizen participation. Besides looking at immediate mobilizing effects, the book sheds light on how digital media use may shape participation patterns through a long-term change in citizenship......The use of news media is regarded as a driver for citizens’ engagement with society and their political participation. But as news media use increasingly shifts to digital platforms, it is crucial to understand the interplay between a changing media environment and recent patterns of political...... participation. Against the background of citizens’ diverse possibilities for receiving political information and being politically active nowadays, the book focuses on the impact of digital media on political participation in Denmark. By examining this relationship in election- and non-election times as well...

  12. Digital Media Use in Families: Theories and Strategies for Intervention.

    Science.gov (United States)

    Dalope, Kristin A; Woods, Leonard J

    2018-04-01

    Family dynamics are increasingly being influenced by digital media. Three frameworks are described to help clinicians to understand and respond to this influence. First, a social-ecological framework shows how media has both a direct and indirect impact on individuals, relationships, communities, and society. Next, family systems theory is introduced to demonstrate digital media-related interactions within families. Finally, a developmental framework explores the role of digital media in shaping parenting. These theories are then integrated into practical strategies that clinicians can use, including recommendations and resources from the American Academy of Pediatrics. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Innovative Separations Technologies

    Energy Technology Data Exchange (ETDEWEB)

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  14. Colour Separation and Aversion

    Directory of Open Access Journals (Sweden)

    Sarah M Haigh

    2012-05-01

    Full Text Available Aversion to achromatic patterns is well documented but relatively little is known about discomfort from chromatic patterns. Large colour differences are uncommon in the natural environment and deviation from natural statistics makes images uncomfortable (Fernandez and Wilkins 2008, Perception, 37(7, 1098–113; Juricevic et al 2010, Perception, 39(7, 884–899. We report twelve studies documenting a linear increase in aversion to chromatic square-wave gratings as a function of the separation in UCS chromaticity between the component bars, independent of their luminance contrast. Two possible explanations for the aversion were investigated: (1 accommodative response, or (2 cortical metabolic demand. We found no correlation between chromaticity separation and accommodative lag or variance in lag, measured using an open-field autorefractor. However, near infrared spectroscopy of the occipital cortex revealed a larger oxyhaemoglobin response to patterns with large chromaticity separation. The aversion may be cortical in origin and does not appear to be due to accommodation.

  15. Separation of gas mixtures

    International Nuclear Information System (INIS)

    1981-01-01

    Apparatus is described for the separation of a gaseous plasma mixture into components in some of which the original concentration of a specific ion has been greatly increased or decreased, comprising: a source for converting the gaseous mixture into a train of plasma packets; an open-ended vessel with a main section and at least one branch section, adapted to enclose along predetermined tracks the original plasma packets in the main section, and the separated plasma components in the branch sections; drive means for generating travelling magnetic waves along the predetermined tracks with the magnetic flux vector of the waves transverse to each of the tracks; and means for maintaining phase coherence between the plasma packets and the magnetic waves at a value needed for accelerating the components of the packets to different velocities and in such different directions that the plasma of each packet is divided into distinctly separate packets in some of which the original concentration of a specific ion has been greatly increased or decreased, and which plasma packets are collected from the branch sections of the vessels. (author)

  16. Innovative Separations Technologies

    International Nuclear Information System (INIS)

    Tripp, J.; Soelberg, N.; Wigeland, R.

    2011-01-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR and D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  17. Centrifugal gas separator

    Energy Technology Data Exchange (ETDEWEB)

    Kanagawa, A; Fujii, O; Nakamoto, H

    1970-03-09

    Counter currents in the rotary drum of a centrifugal gas separator are produced by providing, at either end of the drum in the vicinity of the circumferential and central positions, respectively, outflow and inflow holes with a communicating passage external to the drum there between whereby gaseous counter currents are caused to flow within the drum and travel through the passage which is provided with gas flow adjustment means. Furthermore, the space defined by the stationary portion of the passage and the rotor drum is additionally provided with a screw pump or throttling device at either its stationary side or drum side or both in order to produce a radially directed gas flow therewithin. A gas mixture is axially admitted into the drum while centrifugal force and a cooling element provided therebelow cause an increase in gas pressure along and a gaseous flow toward the wall member, whereupon the comparatively high pressured circumferentially distributed gas is extracted from the outlet holes, flows through the external gas passage and back into the lower pressured drum core through the inlet holes, thus producing the desired counter currents. The gases thus separated are withdrawn along axially provided discharge pipes. Accordingly, this invention permits heating elements which were formerly used to produce thermal convection currents to be disposed of and allows the length of the rotor drum to be more efficiently utilized to enhance separation efficiency.

  18. Radioactive substance separation systems

    International Nuclear Information System (INIS)

    Sakai, Takuhiko.

    1981-01-01

    Purpose: To enable separation of fission products, radioactive corrosion products and the likes in primary coolants with no requirement for the replacement of separation system during plant service life, by providing protruded magnetic pole plates in a liquid metal flow channel to thereby form slopes magnetic fields. Constitution: A plurality of magnetic pole plates are disposed vertically in a comb-like arrangement so as not to contact with each other along the direction of flow in a rectangular primary coolant pipeway at the exit of the reactor core in an LMFBR type reactor. Large magnetic poles are provided to the upper and lower sides of the pipeway and coils are wound on the side opposed to the pipeway. When electrical current is supplied to the coils, the magnetic pole is magnetized intensely and thus the magnetic pole plates are also magnetized intensely and thus the magnetic pole plates are also magnetized intensely to form large gradient in the magnetic fields between the upper and lower magnetic plates, whereby ferromagnetic and ferrimagnetic fission products and radioactive corrosion products in the coolants are intensely adsorbed and not detached by the flow of the coolants. Accordingly, the fission products and the radioactive corrosion products can surely be removed with no requirement for the exchange of separation system during plant service life. (Horiuchi, T.)

  19. Separation of contaminated concrete

    International Nuclear Information System (INIS)

    Bakiewicz, J.L.; Reymer, A.P.S.

    1990-01-01

    Separating the contaminated parts from the non-contaminated parts from decommissioned nuclear facilities may strongly reduce the amount of contaminated concrete. The reduction in volume of the radioactive contaminated concrete is dependent on how much cementstone is in the concrete. This research program shows that the radioactive contamination is mostly in the cementstone. However the choice that the cementstone parts, (or better said the radioactive parts) are smaller than 1 mm may not always be true. Normally the cementstone takes about 30% of the total concrete volume. A separation procedure composed by a combination of milling and thermal shock has been assessed. Both the cold and hot thermal shock in combination with milling are not able to separate the cementstone from the larger aggregates completely. However, the cementstone from the concrete with a low nominal grain size seems to be almost completely removed by the combination cold thermal shock/milling, while the cementstone from the concrete with a high nominal grain size seems to be almost completely removed by the combination hot thermal shock/milling. After both methods a layer of cementstone was still visible on the aggregates. Washing followed by a nitric acid treatment removed each 2 wt% of cementstone

  20. Method of isotope separation

    Energy Technology Data Exchange (ETDEWEB)

    Lyon, R K

    1975-05-22

    Isotopes of a gaseous compound can be separated by multi-infrared photoabsorption which follows a selective dissociation of the excited molecules by single photon absorption of photons of visible or UV radiation. The process involves three steps. Firstly, the molecules to be separated are irradiated with a high-energy IR laser, whereby the molecules of the compound containing the lighter isotopes are preferably excited. They are then irradiated by a second laser with UV or visible light whose frequency of radiation brings the excited molecules into a form in which they can be separated from the non-excited molecules. The third step is the reformation of the substances according to known methods. A power density of at least 10/sup 4/ watt/cm/sup 2/ per torr gas pressure with an irradiation time of 10/sup -10/ to 5 x 10/sup -5/ seconds in the presence of a second gas with at least 5 times higher partial pressure is necessary for the IR radiation. The method may be used for UF/sub 6/ for which an example is given here.

  1. Orchestrating the Media Collage

    Science.gov (United States)

    Ohler, Jason

    2009-01-01

    Modern literacy has always meant being able to both read and write narrative in the media forms of the day, whatever they may be. Just being able to read is not sufficient. A new dimension of literacy is now in play--namely, the ability to adapt to new media forms and fit them into the overall media collage quickly and effectively. A strong case…

  2. 77 FR 19932 - Inmate Communication With News Media: Removal of Byline Regulations

    Science.gov (United States)

    2012-04-03

    ... Communication With News Media: Removal of Byline Regulations AGENCY: Bureau of Prisons, Justice. ACTION: Final... media and the inmate, for which the inmate is compensated. But the scope of this lawsuit does not... because the inmate publishes a writing under a byline in the news media is much more remote. Id. at 1123...

  3. The digital media handbook

    CERN Document Server

    Dewdney, Andrew

    2013-01-01

    The new edition of The Digital Media Handbook presents an essential guide to the historical and theoretical development of digital media, emphasising cultural continuity alongside technological change, and highlighting the emergence of new forms of communication in contemporary networked culture.Andrew Dewdney and Peter Ride present detailed critical commentary and descriptive historical accounts, as well as a series of interviews from a range of digital media practitioners, including producers, developers, curators and artists.The Digital Media Handbook highlights key concerns of today's prac

  4. Media Monopoly in Brazil.

    Science.gov (United States)

    Amaral, Roberto; Guimaraes, Cesar

    1994-01-01

    Documents the process of broadcasting media development in Brazil, the failure of new technologies to produce democratization, and the barriers to democratization erected by monopolization and "metastasis." (SR)

  5. Overview: new media.

    Science.gov (United States)

    O'Keeffe, Gwenn Schurgin

    2012-06-01

    Pediatricians care for children's growth and development from the time they are born until they become adults. In addition, pediatricians must be vigilant for external influences. Technology influences children of all ages. Seventy-five percent of teenagers own cell phones, with 25% using them for social media. Technology can lead to an increase in skills and social benefits but there is also the potential for harm such as sexting, cyberbullying, privacy issues, and Internet addiction, all of which can affect health. Pediatricians must become well versed in the new media to provide media-oriented anticipatory guidance and advice on media-related issues. Copyright © 2012 Elsevier Inc. All rights reserved.

  6. Antennas in inhomogeneous media

    CERN Document Server

    Galejs, Janis; Fock, V A; Wait, J R

    2013-01-01

    Antennas in Inhomogeneous Media details the methods of analyzing antennas in such inhomogeneous media. The title covers the complex geometrical configurations along with its variational formulations. The coverage of the text includes various conditions the antennas are subjected to, such as antennas in the interface between two media; antennas in compressible isotropic plasma; and linear antennas in a magnetoionic medium. The selection also covers insulated loops in lossy media; slot antennas with a stratified dielectric or isotropic plasma layers; and cavity-backed slot antennas. The book wil

  7. Media multitasking in adolescence.

    Science.gov (United States)

    Cain, Matthew S; Leonard, Julia A; Gabrieli, John D E; Finn, Amy S

    2016-12-01

    Media use has been on the rise in adolescents overall, and in particular, the amount of media multitasking-multiple media consumed simultaneously, such as having a text message conversation while watching TV-has been increasing. In adults, heavy media multitasking has been linked with poorer performance on a number of laboratory measures of cognition, but no relationship has yet been established between media-multitasking behavior and real-world outcomes. Examining individual differences across a group of adolescents, we found that more frequent media multitasking in daily life was associated with poorer performance on statewide standardized achievement tests of math and English in the classroom, poorer performance on behavioral measures of executive function (working memory capacity) in the laboratory, and traits of greater impulsivity and lesser growth mindset. Greater media multitasking had a relatively circumscribed set of associations, and was not related to behavioral measures of cognitive processing speed, implicit learning, or manual dexterity, or to traits of grit and conscientiousness. Thus, individual differences in adolescent media multitasking were related to specific differences in executive function and in performance on real-world academic achievement measures: More media multitasking was associated with poorer executive function ability, worse academic achievement, and a reduced growth mindset.

  8. Open Media Science

    DEFF Research Database (Denmark)

    Møller Moltke Martiny, Kristian; Pedersen, David Budtz; Hansted, Allan Alfred Birkegaard

    2016-01-01

    In this article, we present three challenges to the emerging Open Science (OS) movement: the challenge of communication, collaboration and cultivation of scientific research. We argue that to address these challenges OS needs to include other forms of data than what can be captured in a text...... and extend into a fully-fledged Open Media movement engaging with new media and non-traditional formats of science communication. We discuss two cases where experiments with open media have driven new collaborations between scientists and documentarists. We use the cases to illustrate different advantages...... of using open media to face the challenges of OS....

  9. Development of Separation Materials Containing Palladium for Hydrogen Isotopes Separation

    International Nuclear Information System (INIS)

    Deng Xiaojun; Luo Deli; Qian Xiaojing

    2010-01-01

    Displacement chromatography (DC) is a ascendant technique for hydrogen isotopes separation. The performance of separation materials is a key factor to determine the separation effect of DC. At present,kinds of materials are researched, including palladium materials and non-palladium materials. It is hardly replaceable because of its excellent separation performance, although palladium is expensive. The theory of hydrogen isotopes separation using DC was introduced at a brief manner, while several palladium separation materials were expatiated in detail(Pd/K, Pd-Al 2 O 3 , Pd-Pt alloy). Development direction of separation materials for DC was forecasted elementarily. (authors)

  10. Social Media Training for Professional Identity Development in Undergraduate Nurses.

    Science.gov (United States)

    Mather, Carey; Cummings, Elizabeth; Nichols, Linda

    2016-01-01

    The growth of social media use has led to tension affecting the perception of professionalism of nurses in healthcare environments. The aim of this cross-sectional study was to explore first and final year undergraduate student use of social media to understand how it was utilised by them during their course. Descriptive statistical analysis was undertaken to compare differences between first and final year student use. No difference indicated there was a lack of development in the use of social media, particularly concerning in relation to expanding their professional networks. There is a need for the curriculum to include opportunities to teach student nurses methods to ensure the appropriate and safe use of social media. Overt teaching and modelling of desired behaviour to guide and support the use of social media to positively promote professional identity formation, which is essential for work-readiness at graduation, is necessary.

  11. Growth of Campylobacter incubated aerobically in fumarate-pyruvate media or media supplemented with dairy, meat, or soy extracts and peptones.

    Science.gov (United States)

    Hinton, Arthur

    2016-09-01

    The ability of Campylobacter to grow aerobically in media supplemented with fumarate-pyruvate or with dairy, meat, or soy extracts or peptones was examined. Optical densities (OD) of Campylobacter cultured in basal media, media supplemented with fumarate-pyruvate or with 1.0, 2.5, 5.0, or 7.5% beef extract was measured. Growth was also compared in media supplemented with other extracts or peptones. Finally, cfu/mL of Campylobacter recovered from basal media or media supplemented with fumarate-pyruvate, casamino acids, beef extract, soytone, or beef extract and soytone was determined. Results indicated that OD of cultures grown in media supplemented with fumarate-pyruvate or with 5.0 or 7.5% beef extract were higher than OD of isolates grown in basal media or media supplemented with lower concentrations of beef extract. Highest OD were produced by isolates grown in media supplemented with beef extract, peptone from meat, polypeptone, proteose peptone, or soytone. Also, more cfu/mL were recovered from media with fumarate-pyruvate, beef extract, soytone, or beef extract-soytone than from basal media or media with casamino acids. Findings indicate that media supplemented with organic acids, vitamins, and minerals and media supplemented with extracts or peptones containing these metabolites can support aerobic growth of Campylobacter. Published by Elsevier Ltd.

  12. Australian health professions student use of social media.

    Science.gov (United States)

    Usher, Kim; Woods, Cindy; Casellac, Evan; Glass, Nel; Wilson, Rhonda; Mayner, Lidia; Jackson, Debra; Brown, Janie; Duffy, Elaine; Mather, Carey; Cummings, Elizabeth; Irwin, Pauletta

    2014-01-01

    Increased bandwidth, broadband network availability and improved functionality have enhanced the accessibility and attractiveness of social media. The use of the Internet by higher education students has markedly increased. Social media are already used widely across the health sector but little is currently known of the use of social media by health profession students in Australia. A cross-sectional study was undertaken to explore health profession students' use of social media and their media preferences for sourcing information. An electronic survey was made available to health profession students at ten participating universities across most Australian states and territories. Respondents were 637 first year students and 451 final year students. The results for first and final year health profession students indicate that online media is the preferred source of information with only 20% of students nominating traditional peer-reviewed journals as a preferred information source. In addition, the results indicate that Facebook usage was high among all students while use of other types of social media such as Twitter remains comparatively low. As health profession students engage regularly with social media, and this use is likely to grow rather than diminish, educational institutions are challenged to consider the use of social media as a validated platform for learning and teaching.

  13. SOCIAL MEDIA INTELLIGENCE: OPPORTUNITIES AND LIMITATIONS

    Directory of Open Access Journals (Sweden)

    Adrian Liviu IVAN

    2015-09-01

    Full Text Available An important part of the reform of the intelligence community is felt in the opening linked with the widening spectrum of methods and spaces which can be used to collect and analyse dates and information. One of these methods that produce large mutations in the system is connected to the world of social media which proves to be a huge source of information. Social Media Intelligence (SOCMINT, the newest member of the family INT's, is undoubtedly a separate domain, a practice rooted in the work of the intelligence community. This paper proposes a general characterization of the most important aspects of Social Media Intelligence, a brand new way for the intelligence community to collect and analyse information for national security purposes (but not only in the context of the current global challenges. Moreover, the work is focused in identifying the further limitations and opportunities of this practice in the upcoming decade.

  14. Television in a New Media Environment

    Directory of Open Access Journals (Sweden)

    Viktorija Car

    2010-12-01

    Full Text Available The first decade of the 21st century has brought about comprehensive changes for media and communications in general. The new multimedia landscape has broken traditional boarders between telecommunications, the audiovisual industry, and information technology. Still, the border between traditional and new media is quite defined, yet there exists a tendency to mitigate it. Changes in media content production will play the dominant role in that process, as well the fact that the three-step flows of communication encompass new configurations of one-to-one, one-to-many, and many-to-many communication across the online/offline divide. In such processes of development and transformation, video content, once reserved exclusively for film and television using the one-way channel of communication (from content provider to viewers, now plays an increasingly important role. New media provides opportunities for video content to use three-step flows of communication, which subsequently enables space for new video genres and formats. This article presents the results of the study entitled, ”Media Accountability”, and compares them with the author’s own research on television news and with Forrester’s research on youth as a media audience. Finally, this article provides insights on the future of television as a medium and its existence as a traditional medium.

  15. Adapting Behavioral Interventions for Social Media Delivery

    Science.gov (United States)

    Waring, Molly E; May, Christine N; Ding, Eric Y; Kunz, Werner H; Hayes, Rashelle; Oleski, Jessica L

    2016-01-01

    Patients are increasingly using online social networks (ie, social media) to connect with other patients and health care professionals—a trend called peer-to-peer health care. Because online social networks provide a means for health care professionals to communicate with patients, and for patients to communicate with each other, an opportunity exists to use social media as a modality to deliver behavioral interventions. Social media-delivered behavioral interventions have the potential to reduce the expense of behavioral interventions by eliminating visits, as well as increase our access to patients by becoming embedded in their social media feeds. Trials of online social network-delivered behavioral interventions have shown promise, but much is unknown about intervention development and methodology. In this paper, we discuss the process by which investigators can translate behavioral interventions for social media delivery. We present a model that describes the steps and decision points in this process, including the necessary training and reporting requirements. We also discuss issues pertinent to social media-delivered interventions, including cost, scalability, and privacy. Finally, we identify areas of research that are needed to optimize this emerging behavioral intervention modality. PMID:26825969

  16. Adapting Behavioral Interventions for Social Media Delivery.

    Science.gov (United States)

    Pagoto, Sherry; Waring, Molly E; May, Christine N; Ding, Eric Y; Kunz, Werner H; Hayes, Rashelle; Oleski, Jessica L

    2016-01-29

    Patients are increasingly using online social networks (ie, social media) to connect with other patients and health care professionals--a trend called peer-to-peer health care. Because online social networks provide a means for health care professionals to communicate with patients, and for patients to communicate with each other, an opportunity exists to use social media as a modality to deliver behavioral interventions. Social media-delivered behavioral interventions have the potential to reduce the expense of behavioral interventions by eliminating visits, as well as increase our access to patients by becoming embedded in their social media feeds. Trials of online social network-delivered behavioral interventions have shown promise, but much is unknown about intervention development and methodology. In this paper, we discuss the process by which investigators can translate behavioral interventions for social media delivery. We present a model that describes the steps and decision points in this process, including the necessary training and reporting requirements. We also discuss issues pertinent to social media-delivered interventions, including cost, scalability, and privacy. Finally, we identify areas of research that are needed to optimize this emerging behavioral intervention modality.

  17. Gender differences in job separation rates and employment stability

    DEFF Research Database (Denmark)

    Frederiksen, Anders

    2008-01-01

    I analyze the job separation process to learn about gender differences in job separation rates and employment stability. An essential finding is that employer-employee data are required to identify gender differences in job separation probabilities because of labor market segregation. Failure...... workplaces. Finally, women's employment stability is relatively low because they are more likely to move from a job and into unemployment or out of the labor force, and less likely to make job-to-job transitions....

  18. Making Media Studies

    Directory of Open Access Journals (Sweden)

    David Gauntlett

    2015-12-01

    Full Text Available This podcast is a recording of a research seminar that took place on December 3, 2015, at the University of Westminster's Communication and Media Research Institute (CAMRI. In this contribution, David Gauntlett discusses his new book, Making Media Studies, and other new work. In Making Media Studies (Peter Lang, 2015, Gauntlett proposes a vision of media studies based around doing and making – not about the acquisition of skills, as such, but an experience of building knowledge and understanding through creative hands-on engagement with all kinds of media. Gauntlett suggests that media studies scholars have failed to recognise the significance of everyday creativity – the vital drive of people to make, exchange, and learn together, supported by online networks. He argues that we should think about media in terms of conversations, inspirations, and making things happen. Media studies can be about genuine social change, he suggests, if we recognise the significance of everyday creativity, work to transform our tools, and learn to use them wisely. David Gauntlett is a Professor in the School of Media, Arts and Design at the University of Westminster, where he is also the School's Co-Director of Research. He is the author of several books, including: Creative Explorations (2007, Media, Gender and Identity: An Introduction (2nd edition 2008, Making is Connecting (2011, and Making Media Studies (2015. He has made a number of popular online resources, videos and playthings, and has pioneered creative research and workshop methods. He is external examiner for Information Experience Design at the Royal College of Art, London.

  19. Educational Potential of New Media

    Directory of Open Access Journals (Sweden)

    Maria Yu. Kazak

    2017-11-01

    Full Text Available Digitalization of the mass media, which has radically changed the information environment, creates new opportunities for self-education and upgrowth of the audience. The paper defines the communicative and cultural status of new media, characterizes the socio-cultural and technological aspects of their dynamics; substantiates the necessity of elaborating mechanisms for systematization of heterogeneous information flows and elaborating criteria for their evaluation in the era of globalization of the media sphere, what implies a qualitatively different level of media competence of the audience, provided with such factors as media education, media coverage, media criticism. The definition of concepts "media competence", "media enlightenment", "media education", "media criticism" is given and their functional areas are delineated. Social networks are considered as an important tool for media enlightenment which provides significant opportunities for promoting cultural achievements in the new media environment.

  20. Method to separate isotopes

    International Nuclear Information System (INIS)

    Coenen, H.; Neuschuetz, D.

    1980-01-01

    An extraction by means of supercritical pure gases (e.g. CD 2 ) or gas mixtures is proposed to separate isotopes, especially H/D, Li-6/Li-7, and U-235/U-238, and water or benzol is used as entrainer. The extraction shall be carried out at pressure rates of about 350 bar above the critical pressure with the temperature being by up to 100 0 C above the critical temperature. A NaCl-solution and the change of the isotopic ratio Cl-35/Cl-37 are investigated for example purpose. (UWI) [de

  1. Why Recruits Separate Early

    Science.gov (United States)

    1991-01-01

    our sample were reportedly unable to adjust to the military environment due to social or emotional immaturity. This problem was especially prevalent...Table 9. Table 9 REASONS FOR EARLY SEPARATION 1. Mental health. Phobias , suicide threats and attempts, emotional immaturity, and personality and...hliurfl’lutf t’ htrtiuug tht .’ plinittol piioL’m.9 evIn’ thfll I b’ r i’lli. vre’.Ilv ifao~ , ýI ll.tv ill it](- rv ’: 111nil tln1 (i~..󈧏 4 P A W4.11

  2. Separation of chemical species

    International Nuclear Information System (INIS)

    Rentzepis, P.M.

    1977-01-01

    Isotopic separation is accomplished by (1) a second photon irradiation step for selective ionization of a first isotopic species and (2) selective precipitation of a generally immiscible liquid from the saturating vapor phase on the ionized species. The first photon corresponds with a sharply defined spectral portion of the irradiation which exclusively excites the first species to a vibrational level. The second photon further excites this species to its ionization level. Selective precipitation is by coulombic attraction between the ionized species and the vapor. The procedure is applicable to any vapor phase ionizable material

  3. SEPARATION OF PLUTONIUM

    Science.gov (United States)

    Maddock, A.G.; Smith, F.

    1959-08-25

    A method is described for separating plutonium from uranium and fission products by treating a nitrate solution of fission products, uranium, and hexavalent plutonium with a relatively water-insoluble fluoride to adsorb fission products on the fluoride, treating the residual solution with a reducing agent for plutonium to reduce its valence to four and less, treating the reduced plutonium solution with a relatively insoluble fluoride to adsorb the plutonium on the fluoride, removing the solution, and subsequently treating the fluoride with its adsorbed plutonium with a concentrated aqueous solution of at least one of a group consisting of aluminum nitrate, ferric nitrate, and manganous nitrate to remove the plutonium from the fluoride.

  4. Isotope separation process

    International Nuclear Information System (INIS)

    Lyon, R.K.; Kaldor, A.

    1977-01-01

    In a method for the separation of isotopes of uranium in UF 6 , the UF 6 is subjected to ir radiation at a predetermined wavelength or set of wavelengths for less than 10 -3 sec in such a manner that at least 0.1% of the 235 UF 6 molecules absorb an energy of more than 2000 cm -1 . The excited UF 6 is then reacted with a gaseous reagent, F 2 , Cl 2 , or Br 2 , to produce a product which is then recovered by means known in the art

  5. Advanced Separations at SRS

    International Nuclear Information System (INIS)

    Thompson, M.C.

    1998-03-01

    The Savannah River Site (SRS) has many waste streams which are contaminated with radionuclides and/or hazardous materials which must be treated to remove the radioactivity (Cs, Sr, tritium, actinides) and hazardous components (polychlorinated biphenyls, cyanide, metal ions). This task provides test beds for ESP-developed separations materials and technologies using actual SRS waste streams. The work includes different SRS waste streams; high level waste solutions presently stored in underground tanks onsite, water recycled from the waste vitrification plant, and reactor basin water in excess facilities

  6. Digital media in the home: technical and research challenges

    Science.gov (United States)

    Ribas-Corbera, Jordi

    2005-03-01

    This article attempts to identify some of the technology and research challenges facing the digital media industry in the future. We first discuss several trends in the industry, such as the rapid growth of broadband Internet networks and the emergence of networking and media-capable devices in the home. Next, we present technical challenges that result from these trends, such as effective media interoperability in devices, and provide a brief overview of Windows Media, which is one of the technologies in the market attempting to address these challenges. Finally, given these trends and the state of the art, we argue that further research on data compression, encoder optimization, and multi-format transcoding can potentially make a significant technical and business impact in digital media. We also explore the reasons that research on related techniques such as wavelets or scalable video coding is having a relatively minor impact in today"s practical digital media systems.

  7. Understanding mental distress in film and media: a new agenda?

    Science.gov (United States)

    Harper, Stephen

    2008-07-01

    This paper surveys some recent developments in media criticism and recent developments in film and media representations of mental distress. Focusing on a representations drawn from various forms of media, the paper argues that media and film images of mental distress are in many cases 'positive' and sympathetic, although they can also contain sexist, racist and other problematic elements that are not commonly identified by anti-stigma campaigners. It also suggests that while still valid in many ways, existing anti-stigma criticism tends to focus on a rather undifferentiated notion of 'violence to others' as the sole criterion against which media images are judged. Finally, the paper proposes that critics and campaigners pay closer attention to how the particular form or genre of any media text influences its treatment of psychological distress.

  8. Media Anthropology: A Theoretical Framework

    Science.gov (United States)

    Eiselein, E. B.; Topper, Martin

    1976-01-01

    Media anthropology, a diverse field, has involved nearly all the major subdisciplines of anthropology and most of the major media in five different areas of interaction: the study of media, reaching the public, gathering data, teaching with media, and applied media anthropology. (NQ)

  9. New processes for uranium isotope separation

    International Nuclear Information System (INIS)

    Vanstrum, P.R.; Levin, S.A.

    1977-01-01

    An overview of the status and prospects for processes other than gaseous diffusion, gas centrifuge, and separation nozzle for uranium isotope separation is presented. The incentive for the development of these processes is the increasing requirements for enriched uranium as fuel for nuclear power plants and the potential for reducing the high costs of enrichment. The latest nuclear power projections are converted to uranium enrichment requirements. The size and timing of the market for new enrichment processes are then determined by subtracting the existing and planned uranium enrichment capacities. It is estimated that to supply this market would require the construction of a large new enrichment plant of 9,000,000 SWU per year capacity, costing about $3 billion each (in 1976 dollars) about every year till the year 2000. A very comprehensive review of uranium isotope separation processes was made in 1971 by the Uranium Isotope Separation Review Ad Hoc Committee of the USAEC. Many of the processes discussed in that review are of little current interest. However, because of new approaches or remaining uncertainties about potential, there is considerable effort or continuing interest in a number of alternative processes. The status and prospects for attaining the requirements for competitive economics are presented for these processes, which include laser, chemical exchange, aerodynamic other than separation nozzle, and plasma processes. A qualitative summary comparison of these processes is made with the gaseous diffusion, gas centrifuge, and separation nozzle processes. In order to complete the overview of new processes for uranium isotope separation, a generic program schedule of typical steps beyond the basic process determination which are required, such as subsystem, module, pilot plant, and finally plant construction, before large-scale production can be attained is presented. Also the present value savings through the year 2000 is shown for various

  10. Japanese Media in English.

    Science.gov (United States)

    Tanaka, Sachiko Oda

    1995-01-01

    Describes the use of English in the media in Japan, focusing on the role and history of English-language newspapers, radio, and television programs, as well as the proliferation of English-language films shown in Japanese cinemas. Discusses the implications of English in the Japanese media. (20 references) (MDM)

  11. Advertising Pressures on Media.

    Science.gov (United States)

    Hammitt, Harry

    The majority of the media in the United States is funded through revenues derived from the sale of advertising space. The problem that arises from this situation is fundamentally an economic one: if advertisers are paying the bills for the media, how much control over content should they have? This report offers a review of instances in which…

  12. Corporeal-Locomotive Media

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft

    and experiences such as reading or listening to a story and watching a movie or theatre play and other traditional or new media forms. These circumstances make the article question whether digital games can be understood as (new) media form at all and, thus, it points towards a possible new vocabulary...... for and comprehension of digital games, gameplay and gameplayers....

  13. A Religious Media Revolution?

    DEFF Research Database (Denmark)

    Skovgaard-Petersen, Jakob

    2016-01-01

    This article is a preliminary survey of the media usage of Sunni religious actors during the Syrian conflict. It traces the adoption of new media by religious actors, and analyses the kind of authority these actors have sought to embody, whether regime supporting, oppositional or jihadist...

  14. Loneliness and Media Gratifications.

    Science.gov (United States)

    Canary, Daniel J.; Spitzberg, Brian H.

    1993-01-01

    Assesses the nature of the relationship between experienced loneliness and media gratifications. Finds that chronically lonely college students rely less on media for escape than do others and that they reported the least motivation for watching their favorite soap opera. (SR)

  15. Media Entertainment and emotions

    DEFF Research Database (Denmark)

    Tan, Ed S.

    2017-01-01

    The chapter presents a psychological framework for entertainment experiences. It reviews types of emotion and their associations with media entertainment contents, explaining the role of genre.......The chapter presents a psychological framework for entertainment experiences. It reviews types of emotion and their associations with media entertainment contents, explaining the role of genre....

  16. Men, Myth, and Media.

    Science.gov (United States)

    Thoman, Elizabeth, Ed.; Silver, Rosalind, Ed.

    1989-01-01

    This issue on gender and the media contains the following (1) "Home, Home on the Remote"; (2) "Dads Through the Decades" (Mark Crispin Miller); (3) "The New Man: That's Entertainment!" (John Lehrer); (4) "Singing Men's Songs" (Kerry Skorlich); (5) "Media Myths and Men's Work" (Ian Harris); (6) "Why Are There No Asian Male Anchors?" (Ben…

  17. Austria: Media Dependence.

    Science.gov (United States)

    Signitzer, Benno

    1978-01-01

    Describes the Austrian broadcast industry which is dominated by foreign influences. Suggests the restoration of autonomy of Austria's media through a system of promotion of and subsidies to Austrian media efforts, as well as a decentralization of foreign influence to increase the quality and competitiveness of domestic production. (JMF)

  18. Mapping Media and Meaning

    DEFF Research Database (Denmark)

    Chamberlain, Alan; Bødker, Mads; Papangelis, Konstantinos

    2017-01-01

    places and intangible personal content can be used to develop meaningful experiences. The paper explores the use of autoethnography as a method for soundscape design in the fields of personal heritage and locative media. Specifically, we explore possible connections between digital media, space...

  19. Understanding social media logic

    NARCIS (Netherlands)

    van Dijck, J.; Poell, T.

    2013-01-01

    Over the past decade, social media platforms have penetrated deeply into the mech­anics of everyday life, affecting people's informal interactions, as well as institutional structures and professional routines. Far from being neutral platforms for everyone, social media have changed the conditions

  20. Literacy, Learning, and Media.

    Science.gov (United States)

    Adams, Dennis; Hamm, Mary

    2000-01-01

    Considers the expanding definition of literacy from traditional reading and writing skills to include technological, visual, information, and networking literacy. Discusses the impact of media on social interactions and intellectual development; linking technology to educational goals; influences of new media symbol systems on communication;…

  1. Introduction to Media.

    Science.gov (United States)

    Riler, Robert

    Designed for senior high school students, this one semester course focuses on four aspects of modern media: television, film, radio, and advertising. Each topic is worked into a weekly lesson plan format that stresses the active involvement of students in the learning process. The course outline contains lists of objectives and media materials…

  2. Work in the Media

    NARCIS (Netherlands)

    Deuze, M.

    2014-01-01

    As media have become dominant players in society’s affairs and, as an industry, represent a powerful economic and symbolic force, it is disheartening to see that work across the creative industries is becoming increasingly precarious. At the same time, media practitioners address this precarity in a

  3. Corporate Media Governance

    NARCIS (Netherlands)

    Kempen, Petrus Cornelis

    2011-01-01

    The media can make or break a reputation. This being said, it seems to be essential for companies, governments and institutions to pay specific attention to corporate media management in their daily operations. However, this thesis shows that they often neglect to pay adequate attention to corporate

  4. Building Social Media Connections

    Science.gov (United States)

    Ferriter, William N.; Ramsden, Jason T.; Sheninger, Eric C.

    2012-01-01

    Incorporating social media tools into your professional practices does not have to be intimidating as long as you are willing to tackle five action steps. It is far easier to articulate the strengths--and to imagine the possibilities--of social media spaces as tools for communication and professional development when you are actively using those…

  5. Printed Spacecraft Separation System

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; Holmans, Walter [Planetary Systems Corporation

    2016-10-01

    In this project Planetary Systems Corporation proposed utilizing additive manufacturing (3D printing) to manufacture a titanium spacecraft separation system for commercial and US government customers to realize a 90% reduction in the cost and energy. These savings were demonstrated via “printing-in” many of the parts and sub-assemblies into one part, thus greatly reducing the labor associated with design, procurement, assembly and calibration of mechanisms. Planetary Systems Corporation redesigned several of the components of the separation system based on additive manufacturing principles including geometric flexibility and the ability to fabricate complex designs, ability to combine multiple parts of an assembly into a single component, and the ability to optimize design for specific mechanical property targets. Shock absorption was specifically targeted and requirements were established to attenuate damage to the Lightband system from shock of initiation. Planetary Systems Corporation redesigned components based on these requirements and sent the designs to Oak Ridge National Laboratory to be printed. ORNL printed the parts using the Arcam electron beam melting technology based on the desire for the parts to be fabricated from Ti-6Al-4V based on the weight and mechanical performance of the material. A second set of components was fabricated from stainless steel material on the Renishaw laser powder bed technology due to the improved geometric accuracy, surface finish, and wear resistance of the material. Planetary Systems Corporation evaluated these components and determined that 3D printing is potentially a viable method for achieving significant cost and savings metrics.

  6. Apparatus for diffusion separation

    International Nuclear Information System (INIS)

    Nierenberg, W.A.

    1976-01-01

    A diffuser separator apparatus is described which comprises a plurality of flow channels in a single stage. Each of said channels has an inlet port and an outlet port and a constant cross sectional area between said ports. At least a portion of the defining surface of each of said channels is a diffusion separation membrane, and each of said channels is a different cross sectional area. Means are provided for connecting said channels in series so that each successive channel of said series has a smaller cross sectional area than the previous channel of said series. Also provided are a source of gaseous mixture, individual means for flowing said gaseous mixture to the inlet port of each of said channels, gas receiving and analyzing means, individual means for flowing gas passing from each of said outlet ports and means for flowing gas passing through said membranes to said receiving and analyzing means, and individual means for connecting the outlet port of each channel with the inlet port of the channel having the next smaller cross sectional area

  7. Isotope separation process

    International Nuclear Information System (INIS)

    Wexler, Sol; Young, C.E.

    1976-01-01

    Description is given of method for separating a specific isotope from a mixture of isotopes of an actinide element present as MF 6 , wherein M is the actinide element. It comprises: preparing a feed gas mixture of MF 6 in a propellant gas; passing the feed gas mixture under pressure through an expansion nozzle while heating the mixture to about 600 0 C; releasing the heated gas mixture from the nozzle into an exhaust chamber having a reduced pressure, whereby a gas jet of MF 6 molecules, MF 6 molecular clusters and propellant gas molecules is formed, the MF 6 molecules having a translational energy of about 3 eV; converting the MF 6 molecules to MF 6 ions by passing the jet through a cross jet of electron donor atoms so that an electron transfer takes place between the MF 6 - molecules and the electron donor atoms whereby the jet is now quasi-neutral, containing negative MF 6 - ions and positive donor ions; passing the quasi-neutral jet through a radiofrequency mass filter tuned to separate the MF 6 ions containing the specific isotope from the MF 6 - ions of the other isotopes and neutralizing and collecting the MF 6 molecules of the specific isotope [fr

  8. Separation of gases

    International Nuclear Information System (INIS)

    Wang, C.G.

    1980-01-01

    A process for separating gaseous mixtures of molecules of different mass comprises the steps of: causing a rotational nozzle to eject a contiguous plurality of successive groups of molecules into an evacuated space, the groups mutually overlapping to form a continuous stream of the mixture in the form of an Archimedean spiral, allowing the molecules of each group of molecules to move in accordance with their thermal velocities for a predetermined period of time following ejection, thereby to allow each group of molecules to form a generally spherical configuration the outer portion of which will be enriched, in molecules of lighter mass, relative to the inner portion thereof, using a deflector means co-rotating with the rotating nozzle to deflect molecules, which have been allowed to move for the predetermined period of time in accordance with their thermal velocities, from at least one desired portion of the stream and using a stationary collector means to collect the deflected molecules. The process is described with reference to the separation of isotopes of uranium hexafluoride. (author)

  9. Trolling new media: violent extremist groups recruiting through social media

    OpenAIRE

    Chang, Mark D.

    2015-01-01

    Approved for public release; distribution is unlimited With the advent and subsequent growth of several new media technologies, violent extremist groups have incorporated social media into recruiting strategies. How are violent extremist groups using social media for recruiting? This thesis explores several new media technologies—websites, blogs, social media, mobile phones, and online gaming—to determine if violent extremist groups rely on social media for recruiting. By comparing the com...

  10. Komunikasi Krisis di Era New Media dan Social Media

    OpenAIRE

    Prastya, Narayana Mahendra

    2016-01-01

    New media and social media have changed the practice of public relations. One area that changed is crisis communication. Because of these new technologies, crisis can be more complex. The pace of information, the uncertainty, and the rumors, are increasing. Public relations practitioners should include the new media and social media use in their crisis communication plan. Before doing that, public relations practitioners should change their mindset about social media and new media. The first ...

  11. Populism and the media

    DEFF Research Database (Denmark)

    Esser, Frank; Stepinska, Agnieszka; Hopmann, David Nicolas

    2017-01-01

    European media systems have gone through major changes in the last few decades, and these changes have included increased opportunity structures for the dissemination of populist messages. Chapter 12 (‘Switzerland’) rightly states that the disappearance of the traditional party press, increased...... media ownership concentration, dependence on advertising, and a stronger orientation toward news values have worked in favor of a growing populist discourse. The newly established online media are seen as having a high afnity to populism’s rhetorical persuasion because both aim for the “quick kick....../click” with a broad audience. As was stated in Chapter 1 in this volume, the role that the media play in the dissemination of populism is largely under-explored. In the classical research literature dealing with populism (see, e.g., Canovan, 1981; Taggart, 2000), communication and media are not addressed at all. When...

  12. Media Sociography on Weblogs

    DEFF Research Database (Denmark)

    Tække, Jesper

    Weblogs are not only one of the newest technical media for communication, but also one of the most difficult to understand. Are weblogs a kind of mass medium, a personal medium like an online diary, or a medium that gives space for communities to grow? Or are weblogs a medium that enable all...... these possibilities depended on the actual use? This paper throws some light on what weblogs are by using the methodology of Media Sociography (Tække 2003, 2004a, 2004b and 2004c). Media Sociography is a strategy for analysing mediated social systems or in other words a strategy for describing the social in relation...... to the media it is based on. Theoretically seen it is inspired of two theoretical paradigms the Sociological Systems Theory of Niklas Luhmann and the Media Theory (also called the Toronto school). Empirically the paper primary draws on the literature about weblogs, which could be framed as CMC...

  13. Social Media in Organizations

    DEFF Research Database (Denmark)

    Razmerita, Liana; Kirchner, Kathrin; Nabeth, Thierry

    2014-01-01

    By using social media, many companies try to exploit new forms of interaction, collaboration, and knowledge sharing through leveraging the social, collaborative dimension of social software. The traditional collective knowledge management model based on a top-down approach is now opening up new...... avenues for a bottom-up approach incorporating a more personal knowledge management dimension, which could be synergized into collective knowledge using the social-collaborative dimension of social media. This article addresses the following questions: (1) How can social media support the management...... of personal and collective knowledge using a synergetic approach? (2) Do the personal and collective dimensions compete with each other or can they reinforce each other in a more effective manner using social media? Our findings indicate that social media supports both the personal and collective dimensions...

  14. Social Media Reputation

    DEFF Research Database (Denmark)

    Etter, Michael; Colleoni, Elanor; Ravasi, Davide

    directly to corporate performance and actions. Secondly, prominent reputation measurements couple stakeholders´ believes to reputation drivers through the use of predefined scales and items. We argue that with the rise of social media a company´s reputation has increasingly become autonomous from corporate...... actions, which demands a greater decoupling of stakeholders´ perceptions from corporate signals or actions in corporate reputation research. We develop the concept of social media reputation as the overall evaluation of a company presented in social media and present a new approach of measuring reputation...... based on social media data that accounts for the autonomy of stakeholder´s perception of a firm. We compare and contrast this novel social media reputation measure (SMRM) with traditional reputation measurements and find that SMRM is a valuable measurement to capture the autonomy of the stakeholders...

  15. Balancing media environments

    DEFF Research Database (Denmark)

    Olesen, Mogens

    The paper examines how students in Danish upper secondary schools experience the uses and effects of the digital environment in relation to their school activities. Theoretically a media ecological perspective (Strate 2006) is applied which understands teaching and learning practices as shaped...... by the interrelation between teacher, student and the media technologies. According to this perspective, media creates an environment that shapes our possibilities for acting and communicating. In a basic sense, teaching and learning is a communicative situation where, traditionally, the teacher sends information...... to the receiving students through a medium (e.g. speech, blackboard, book or online learning platform). Digital media challenge this situation due to their affordances (Gibson 1979) for interactivity. Affordance has become an increasingly popular term within media studies for describing a complementary...

  16. From media crossing to media mining

    NARCIS (Netherlands)

    de Jong, Franciska M.G.; Piperidis, S.; Cunningham, H.; Tablan, V.

    2006-01-01

    This paper reviews how the concept of Media Crossing has contributed to the advancement of the application domain of information access and explores directions for a future research agenda. These will include themes that could help to broaden the scope and to incorporate the concept of

  17. Social Justice and Media. Media Corner.

    Science.gov (United States)

    Braun, Joseph A., III, Ed.

    1994-01-01

    Contends that the end of slavery, women's suffrage, and the civil rights movement were watershed events of social justice in U.S. history. Provides reviews of two media-based sets of instructional materials that can help students understand the struggle by disenfranchised groups to become full participants in society. (CFR)

  18. Separation of fission products by the use of recoil; Separation des produits de fission par utilisation du recul

    Energy Technology Data Exchange (ETDEWEB)

    Henry, R; Beydon, J; Bardy, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    We have studied fission recoil in U{sub 3}O{sub 8} organic solvent mixtures. The organic phase chosen was first naphtalene then terphenyl. Graphite and activated carbon were also tried out as recoil media. We first verified that the fission fragments are ejected from the uranium oxide particles under our experimental conditions. The retention phenomenon observed is due to an adsorption occurring either during irradiation or during the chemical treatment. Using naphthalene or terphenyl, the individual separation of the fission products has made it possible to show the influence of the chemical nature of the recoil medium on the retention of each fission product. We put forward a hypothesis concerning this phenomenon: experiments carried out using 'scavengers', together with kinetic studies make it possible to explain the retention phenomenon and to choose the most favorable conditions for reducing this retention to a low value. The thermal recombination kinetics demonstrate the influence of the fission ion charge on the final value of the retention for a given temperature. The origins of this thermal recombination are discussed. (author) [French] On a etudie le recul de fission dans les melanges U{sub 3}0{sub 8}, phase organique. La phase organique choisie a ete le naphtalene puis le terphenyle. Le graphite et le charbon actif ont egalement ete essayes comme milieux de recul. On a d'abord determine que les fragments de fission sortent des particules d'oxyde d'uranium avec un rendement de 100 pour cent dans nos conditions experimentales. Le phenomene de retention observe est du a une adsorption ayant lieu pendant l'irradiation ou pendant le traitement chimique. Dans le naphtalene et le terphenyle, la separation individuelle des produits de fission a permis de mettre en evidence l'influence de la nature chimique du milieu de recul sur la retention de chaque produit de fission. On avance une hypothese sur ce phenomene: des experiences effectuees avec des 'scavengers

  19. Role of the media in influencing trajectories of youth smoking.

    Science.gov (United States)

    Wakefield, Melanie; Flay, Brian; Nichter, Mark; Giovino, Gary

    2003-05-01

    This paper summarizes results of empirical studies on cigarette advertising and promotions, antismoking advertising, product placement in movies, on television and in music media and news coverage about smoking. In addition, we provide an overview of some of the theoretical literature relevant to the study of media uses and effects. Finally, we discuss empirical findings in the context of these theories to draw some conclusions about media influences on smoking and identify issues for further research. We conclude that (a) the media both shape and reflect social values about smoking; (b) the media provide new information about smoking directly to audiences; (c) the media act as a source of observational learning by providing models which teenagers may seek to emulate; (d) exposure to media messages about smoking also provides direct reinforcement for smoking or not smoking; (e) the media promote interpersonal discussion about smoking; (f) the media can influence "intervening" behaviors that may make teenage smoking less likely; and (g) antismoking media messages can also set the agenda for other change at the community, state or national level. We outline priorities for further research which emphasize the need for longitudinal studies, multi-level studies, an awareness of the probably dynamic relationship between tobacco advertising and antismoking advertising, the importance of determining appraisal of tobacco industry youth smoking prevention efforts and the dearth of research on news coverage about smoking.

  20. Advancing the use of streaming media and digital media technologies at the Connecticut Department of Transportation.

    Science.gov (United States)

    2014-03-27

    This final research report culminates a decade-long initiative to demonstrate and implement streaming media technologies at CONNDOT. This effort began in 2001 during an earlier related-study (SPR-2231) that concluded in 2006. This study (SPR-2254) re...