final dclg full: Topics by WorldWideScience.org

Sample records for final dclg full

Contentious Issues Arising from Payments made in Full and Final Settlement

Directory of Open Access Journals (Sweden)

R Ismail

2008-12-01

Full Text Available Payments made in full and final settlement have on several occasions presented interpretative difficulties for our judiciary, as will become apparent from this case discussion: Be Bop A Lula Manufacturing & Printing v Kingtex Marketing 2008 3 SA 327 (SCA. The Supreme Court of Appeal reversed the judgments of the trial court and the appeal court (full bench of the Cape Provincial Division which were in favour of the creditor. In such cases, the essential enquiry is whether an agreement of compromise exists. A transactio or compromise (in the form of a legal agreement exists where the relevant parties agree to settle previously disputed or uncertain obligations. Like any other agreement, a compromise is based on the contractual rules of offer and acceptance. The first material enquiry in this case wherein the debtor delivered the cheque payment to the creditor (in full and final settlement of the account, is whether 1 an intended offer of compromise exists; or 2 did the debtor merely intend to make payment towards an admitted liability. The court in the Be Bop (SCA case came to the correct finding that an offer of compromise existed. Whilst the judgment is brief, the finding itself gives practical recognition to the principle that admission of liability for a specific amount, accompanied by payment (in full and final settlement, may still be accompanied by an intended offer of compromise, instead of merely making payment towards an admission of liability.
Releasing the full potential of AIKAN - a dry anaerobic digestion biogas technology. Final report

Energy Technology Data Exchange (ETDEWEB)

Joernsgaerd, B.; Broegger Kristensen, M.; Wittrup Hansen, M. [Solum Gruppen, Hedehusene (Denmark); Uellendahl, H. [Aalborg Univ. (AAU), Aalborg (Denmark)

2013-07-15

This final project report contains a summary of the findings and documentation which have been carried out as a part of the EUDP-supported project ''Documentation and En-ergy Yield Optimisation of AIKAN{sup }- a dry anaerobic digestion biogas technology''. The aim was to improve documentation of the AIKAN{sup }technology, improve performance of the AIKAN{sup }technology and thus remove important barriers for market entry on principal export markets caused by the lack of performance documentation. The final report also contains a description of the subsequent process and technology improvements which have been carried out in order to improve and optimize the production process at the full scale AIKAN{sup }biogas plant, Biovaekst, in Audebo, Denmark. The relevant analyses carried out as part of the different work packages are attached as appendixes to the report. It is the intention that the final report and the attached appendices should function as a work of reference for the employees involved in the day to day running and optimization of the AIKAN{sup }technology. (Author)
Full-Length High-Temperature Severe Fuel Damage Test No. 5: Final safety analysis

International Nuclear Information System (INIS)

Lanning, D.D.; Lombardo, N.J.; Panisko, F.E.

1993-09-01

This report presents the final safety analysis for the preparation, conduct, and post-test discharge operation for the Full-Length High Temperature Experiment-5 (FLHT-5) to be conducted in the L-24 position of the National Research Universal (NRU) Reactor at Chalk River Nuclear Laboratories (CRNL), Ontario, Canada. The test is sponsored by an international group organized by the US Nuclear Regulatory Commission. The test is designed and conducted by staff from Pacific Northwest Laboratory with CRNL staff support. The test will study the consequences of loss-of-coolant and the progression of severe fuel damage
Higgs Boson in Multi-b-Jets Final States Reconstruction with Full Simulation of Atlas Detector

International Nuclear Information System (INIS)

Sapinski, M.; Cavalli, D.

2001-01-01

Channels with multi-b-jet final states are very important in the discovery strategies for the Higgs boson search in ATLAS experiment at LHC. Excellent jets reconstruction efficiencies and mass resolution capability of the di-jet system are crucial aspects of the detector performance for the signal observability in these channels. Full simulation and reconstruction of the four representative channels with b-jets in final states is discussed: WH, t(anti)tH with H → b(anti)b and A → Zh, H → hh with h → b(anti)b. These channels are used as benchmark ones to study the different complexity of events, level of combinatorial background from signal itself and universality of the algorithms used for jets reconstruction and energy calibration at the wide range of energy/mass scales. Equivalently important aspect of this study is to verify applicability of the fast detector simulation, based on parametrisation of main features of the detector, for studying signal and background rates for the above channels. For that reason the detailed comparisons of the expected efficiencies and acceptances in full (based on GEANT 3) and fast simulations are shown at the different stages of the selection procedures. In general good agreement is found between results obtained in both approaches. (author)
LiHe{sup +} IN THE EARLY UNIVERSE: A FULL ASSESSMENT OF ITS REACTION NETWORK AND FINAL ABUNDANCES

Energy Technology Data Exchange (ETDEWEB)

Bovino, Stefano; Tacconi, Mario; Gianturco, Francesco A. [Department of Chemistry, Universita degli Studi di Roma ' La Sapienza' , Piazzale A. Moro 5, 00185 Roma (Italy); Curik, Roman [J. Heyrovsky Institute of Physical Chemistry, Dolejskova 3, Prague (Czech Republic); Galli, Daniele, E-mail: fa.gianturco@caspur.it [INAF-Osservatorio Astrofisico di Arcetri, Largo E. Fermi 5, 50125 Firenze (Italy)

2012-06-10

We present the results of quantum calculations based on entirely ab initio methods for a variety of molecular processes and chemical reactions involving the LiHe{sup +} ionic polar molecule. With the aid of these calculations, we derive accurate reaction rates and fitting expressions valid over a range of gas temperatures representative of the typical conditions of the pregalactic gas. With the help of a full chemical network, we then compute the evolution of the abundance of LiHe{sup +} as function of redshift in the early universe. Finally, we compare the relative abundance of LiHe{sup +} with that of other polar cations formed in the same redshift interval.
Polyethylene encapsulation full-scale technology demonstration. Final report

International Nuclear Information System (INIS)

Kalb, P.D.; Lageraaen, P.R.

1994-10-01

A full-scale integrated technology demonstration of a polyethylene encapsulation process, sponsored by the US Department of Energy (DOE) Office of Technology Development (OTD), was conducted at the Environmental ampersand Waste Technology Center at Brookhaven National Laboratory (BNL.) in September 1994. As part of the Polymer Solidification National Effort, polyethylene encapsulation has been developed and tested at BNL as an alternative solidification technology for improved, cost-effective treatment of low-level radioactive (LLW), hazardous and mixed wastes. A fully equipped production-scale system, capable of processing 900 kg/hr (2000 lb/hr), has been installed at BNL. The demonstration covered all facets of the integrated processing system including pre-treatment of aqueous wastes, precise feed metering, extrusion processing, on-line quality control monitoring, and process control
75 FR 81788 - Revocation of Requirements for Full-Size Baby Cribs and Non-Full-Size Baby Cribs

Science.gov (United States)

2010-12-28

...-Size Baby Cribs and Non-Full- Size Baby Cribs AGENCY: Consumer Product Safety Commission. ACTION: Final... Safety Specification for Full-Size Baby Cribs,'' and ASTM F 406-10a, ``Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards.'' The crib standards that the CPSC is publishing...
Testing of components on the shaking table facilities of AEP and contribution to full scale dynamic testing of Kozloduy NPP. Final report

International Nuclear Information System (INIS)

Ambriashvili, Y.

1996-01-01

This final report summarizes the results of components testing on the shaking table facilities of 'Atomenergoproject' which are considered as a contribution to the full scale dynamic testing of the Kozloduy nuclear power plant Units 5 and 6. It was designed on 1.0 g according to the calculations that were based on accelerograms which included artificial and already known recordings of real earthquakes. Maximum acceleration of the designed spectrum and new spectrum which are recommended are now within the range of frequencies 2.5-20 Hz. Active reactor and the primary loop are seismic stable as well as the tested equipment tested by 'Atomenergoproject'
Narrative Finality

Directory of Open Access Journals (Sweden)

Armine Kotin Mortimer

1981-01-01

Full Text Available The cloturai device of narration as salvation represents the lack of finality in three novels. In De Beauvoir's Tous les hommes sont mortels an immortal character turns his story to account, but the novel makes a mockery of the historical sense by which men define themselves. In the closing pages of Butor's La Modification , the hero plans to write a book to save himself. Through the thrice-considered portrayal of the Paris-Rome relationship, the ending shows the reader how to bring about closure, but this collective critique written by readers will always be a future book. Simon's La Bataille de Pharsale , the most radical attempt to destroy finality, is an infinite text. No new text can be written. This extreme of perversion guarantees bliss (jouissance . If the ending of De Beauvoir's novel transfers the burden of non-final world onto a new victim, Butor's non-finality lies in the deferral to a future writing, while Simon's writer is stuck in a writing loop, in which writing has become its own end and hence can have no end. The deconstructive and tragic form of contemporary novels proclaims the loss of belief in a finality inherent in the written text, to the profit of writing itself.
TARGET 2 and Settlement Finality

Directory of Open Access Journals (Sweden)

Ivan MANGATCHEV

2011-03-01

Full Text Available This article examines how TARGET 2 as system implements the idea of settlement finality regulated by Directive 98/26 EC of the European parliament and of the Council of 19 May 1998 on settlement finality in payment and securities settlement systems (Settlement Finality Directive and Directive 2009/44/EC of the European parliament and of the Council of 6 May 2009 amending Directive 98/26/EC on settlement finality in payment and securities settlement systems and Directive 2002/47/EC on financial collateral arrangements as regards linked systems and credit claims (Directive 2009/44/EC. As the title of the arti and finality of the settlement in this system.
Full-scale turbine-missile concrete impact experiments. Final report

International Nuclear Information System (INIS)

Woodfin, R.L.

1983-02-01

Four full-scale experiments were conducted at Sandia National Laboratories' rocket sled facility to provide data on the response of reinforced concrete containment walls to impact and penetration by postulated turbine-produced missiles. The missiles' mass, velocity, and attitude, and the steel liner thickness, were varied. A 1476-kg, 120 0 segment cut from a shrunk-on turbine disc was used for three experiments, and a 2100-kg, 137 0 segment of another disc was used for one experiment. The targets were concrete panels fabricated of commercial ready-mix concrete of strength 24 to 28 MPa at 28 days and heavily reinforced (approx. = 5% by volume) with No. 18 (57-mm-dai) bars. Impacts were perpendicular to the targets at their centers. Three impacts were with the sharp corner of the missile forward (piercing) and one was with the rounded side forward (blunt). Rebar strains, liner strains, and rear face kinematic quantities were recorded for each test. Internal pressure pulses generated by the impacts were recorded on two tests. High-speed camera coverage was extensive. Depth of penetration was the primary measure diameter. Penetration depths into the 1.37-m-thick panels ranged from 33 cm for the blunt impact of the 1476-kg missile at 92 m/s to 65 cm for the piercing impact of the 2100-kg missile at 115m/s. Impact at the piercing attitude caused significantly more severe rear face cracking than did impact at the blunt attitude, but since rear face panel displacements in excess of 6 cm and velocities greater than 7 m/s were measured, results suggested that impact at a blunt attitude might cause scabbing at lower velocities than impact at a piercing attidude. In these tests, the presence of a 9.5-mm-thick steel liner on the rear face of the panel in the latter two tests precluded scabbing. Results also indicated that design formulas in common use give conservative results
The Medline/full-text research project.

Science.gov (United States)

McKinin, E J; Sievert, M; Johnson, E D; Mitchell, J A

1991-05-01

This project was designed to test the relative efficacy of index terms and full-text for the retrieval of documents in those MEDLINE journals for which full-text searching was also available. The full-text files used were MEDIS from Mead Data Central and CCML from BRS Information Technologies. One hundred clinical medical topics were searched in these two files as well as the MEDLINE file to accumulate the necessary data. It was found that full-text identified significantly more relevant articles than did the indexed file, MEDLINE. The full-text searches, however, lacked the precision of searches done in the indexed file. Most relevant items missed in the full-text files, but identified in MEDLINE, were missed because the searcher failed to account for some aspect of natural language, used a logical or positional operator that was too restrictive, or included a concept which was implied, but not expressed in the natural language. Very few of the unique relevant full-text citations would have been retrieved by title or abstract alone. Finally, as of July, 1990 the more current issue of a journal was just as likely to appear in MEDLINE as in one of the full-text files.
Jaundice in the full-term newborn.

Science.gov (United States)

Cohen, Shannon Munro

2006-01-01

Jaundice is a common problem affecting over half of all full-term and most preterm infants. Jaundice describes the yellow orange hue of the skin caused by excessive circulating levels of bilirubin that accumulate in the skin. In most healthy full-term newborns, jaundice is noticed during the first week of life. Shortened hospital stays and inconsistent follow up, especially for first-time breastfeeding mothers, prompted the American Academy of Pediatrics (AAP) to update management guidelines. Health care providers need to be familiar with the diagnosis and management of jaundice to prevent brain, vision, and hearing damage. Treatment of choice for jaundice remains close observation and frequent feeding followed by phototherapy, and finally exchange transfusion for severe or refractory cases.
Full-scale laboratory drilling tests on sandstone and dolomite. Final report

Energy Technology Data Exchange (ETDEWEB)

Black, A. D.; Green, S. J.; Rogers, L. A.

1977-08-01

Full-scale laboratory drilling experiments were performed under simulated downhole conditions to determine what effect changing various drilling parameters has on penetration rate. The two rock types, typical of deep oil and gas reservoirs, used for the tests were Colton Sandstone and Bonne Terre Dolomite. Drilling was performed with standard 7/sup 7///sub 8/ inch rotary insert bits and water base mud. The results showed the penetration rate to be strongly dependent on bit weight, rotary speed and borehole mud pressure. There was only a small dependence on mud flow rate. The drilling rate decreased rapidly with increasing borehole mud pressure for borehole pressures up to about 2,000 psi. Above this pressure, the borehole pressure and rotary speeds had a smaller effect on penetration rate. The penetration rate was then dependent mostly on the bit weight. Penetration rate per horsepower input was also shown to decrease at higher mud pressures and bit weights. The ratio of horizontal confining stress to axial overburden stress was maintained at 0.7 for simulated overburden stresses between 0 and 12,800 psi. For this simulated downhole stress state, the undrilled rock sample was within the elastic response range and the confining pressures were found to have only a small or negligible effect on the penetration rate. Visual examination of the bottomhole pattern of the rocks after simulated downhole drilling, however, revealed ductile chipping of the Sandstone, but more brittle behavior in the Dolomite.
Report on the final BRACElet workshop

Directory of Open Access Journals (Sweden)

Tony Clear

Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.
FULL ALKALINE HYDROLYSIS OF PESTICIDE DYMETOAT WITH OBTAINING ECO-SAFE PRODUCTS

Directory of Open Access Journals (Sweden)

А. Ранський

2012-04-01

Full Text Available In this work alkaline hydrolysis of the dimetoat pesticide and ways of determination of final substanceswere presented. Dependence passing of the reaction and time of the reaction was simulated
A full-acceptance detector for the SSC

International Nuclear Information System (INIS)

Bjorken, J.D.

1991-11-01

In this paper, I will describe very briefly the cartoon of a full-acceptance detector as presented in the expression of interest, along with some of the basic features and technical difficulties. I will describe some theoretical-physics spinoffs emergent from the preparation of the EoI, which bear on general issues relevant to hadron spectroscopy. I review very briefly the capability of the detector for spectroscopy per se. The final section is devoted to concluding remarks
Catarse e Final Feliz

Directory of Open Access Journals (Sweden)

Myriam Ávila

2001-12-01

Full Text Available Resumo: É a certeza de que nada mais – ou nada importante – pode acontecer após o final de um conto que permite o acontecimento da catarse. Se na maioria das narrativas existe algum tipo de dénouement, em algumas delas isso acontece de maneira especialmente satisfatória e afirmativa. O conto de fadas é uma dessas formas narrativas onde o efeito catártico é extremo e preenche objetivos específicos, de acordo com Bruno Bettelheim. Hollywood mimetizou essa forma como estratégia de sedução, iniciando a tradição do final feliz no cinema. A partir do conto de fadas Cinderela, em diferentes versões, juntamente com a animação homônima da Disney e ainda duas versões do filme Sabrina, será traçada aqui uma relação entre a catarse e o final feliz nos contos de fada, bem como seu uso pela indústria cultural. Palavras-chave: catarse, contos de fada, Hollywood
Workflows for Full Waveform Inversions

Science.gov (United States)

Boehm, Christian; Krischer, Lion; Afanasiev, Michael; van Driel, Martin; May, Dave A.; Rietmann, Max; Fichtner, Andreas

2017-04-01

Despite many theoretical advances and the increasing availability of high-performance computing clusters, full seismic waveform inversions still face considerable challenges regarding data and workflow management. While the community has access to solvers which can harness modern heterogeneous computing architectures, the computational bottleneck has fallen to these often manpower-bounded issues that need to be overcome to facilitate further progress. Modern inversions involve huge amounts of data and require a tight integration between numerical PDE solvers, data acquisition and processing systems, nonlinear optimization libraries, and job orchestration frameworks. To this end we created a set of libraries and applications revolving around Salvus (http://salvus.io), a novel software package designed to solve large-scale full waveform inverse problems. This presentation focuses on solving passive source seismic full waveform inversions from local to global scales with Salvus. We discuss (i) design choices for the aforementioned components required for full waveform modeling and inversion, (ii) their implementation in the Salvus framework, and (iii) how it is all tied together by a usable workflow system. We combine state-of-the-art algorithms ranging from high-order finite-element solutions of the wave equation to quasi-Newton optimization algorithms using trust-region methods that can handle inexact derivatives. All is steered by an automated interactive graph-based workflow framework capable of orchestrating all necessary pieces. This naturally facilitates the creation of new Earth models and hopefully sparks new scientific insights. Additionally, and even more importantly, it enhances reproducibility and reliability of the final results.
Final disposal of radioactive waste

Directory of Open Access Journals (Sweden)

Freiesleben H.

2013-06-01

Full Text Available In this paper the origin and properties of radioactive waste as well as its classification scheme (low-level waste – LLW, intermediate-level waste – ILW, high-level waste – HLW are presented. The various options for conditioning of waste of different levels of radioactivity are reviewed. The composition, radiotoxicity and reprocessing of spent fuel and their effect on storage and options for final disposal are discussed. The current situation of final waste disposal in a selected number of countries is mentioned. Also, the role of the International Atomic Energy Agency with regard to the development and monitoring of international safety standards for both spent nuclear fuel and radioactive waste management is described.

Investigation of full-scale high-level waste containment glass blocks. Task 3 characterization of radioactive waste forms a series of final reports (1985-89) - no 24

International Nuclear Information System (INIS)

Moncouyoux, J.; Aure, A.; Ladirat, C.

1991-01-01

A two-year study of the degree of fracturation in full-scale high-level waste glass blocks was undertaken under contract Fl1W-0182. The project included a theoretical investigation of thermal and mechanical stresses arising in the glass and determination of the fracture-inducing stress distribution in the block, as well as an experimental study based on tomographic examinations performed at the BAM in Berlin on full-scale canisters containing glass cast at Marcoule and on water leach tests at 100 0 C to evaluate the fractured leachable surface area. The Castem code system was used to determine the temperature profiles versus time for the glass package. The mechanical study revealed the impact of removing the package from the furnace on the final stress loading. Controlled cooling of glass blocks must be extremely slow (less than 5 0 C per hour) to have a significant effect on the stress loading. Three series of tomographic experiments were carried out: two on a canister as cast, and a third after relieving the canister stresses. Static and dynamic leach tests were conducted to determine the fracturation factor of the glass blocks. Only static leaching provides satisfactory results. Fracturation factors of 10 to 15 were measured on industrial glass blocks. 50 figs.; 20 tabs.; 3 refs
Final Exam Weighting as Part of Course Design

Directory of Open Access Journals (Sweden)

Matthew Franke

2018-03-01

Full Text Available The weighting of a final exam or a final assignment is an essential part of course design that is rarely discussed in pedagogical literature. Depending on the weighting, a final exam or assignment may provide unequal benefits to students depending on their prior performance in the class. Consequently, uncritical grade weighting can discount student learning, by ensuring that improved mastery of material at the semester’s end is not reflected in the course grade. Problems related to several common final exam weights are explored, as are potential solutions to unequal student outcomes made possible by uncritical grade weighting. Ultimately, this essay argues that choosing a weight for a final exam or a final assignment determines what types of student success ought to be possible in the class; therefore, instructors should assign exam weights intentionally, being fully aware of the potential benefits and problems of the weights that they choose.
MATERIALS FOR THE FINAL COVER OF SANITARY LANDFILLS

Directory of Open Access Journals (Sweden)

Davorin Kovačić

1994-12-01

Full Text Available The paper deals with the selection of materials for the sea¬ling layer in the final cover of sanitary landfills. The sealing la¬yer is the most critical component of the final cover. Its role is to minimize percolation of water through the final cover. Ma¬terials used for the construction of the sealing layer are either of mineral origin (compacted clay or geosynthetic (geomem¬brane. They are most often used in combination creating com¬posite liners. Recently alternative materials are also used like paper mill sludge or discarded swelling clay.
Full-sized plates irradiation with high UMo fuel loading. Final results of IRIS 1 experiment

International Nuclear Information System (INIS)

Huet, F.; Marelle, V.; Noirot, J.; Sacristan, P.; Lemoine, P.

2003-01-01

As a part of the French UMo Group qualification program, IRIS 1 experiment contained full-sized plates with high uranium loading in the meat of 8 g.cm -3 . The fuel particles consisted of 7 and 9 wt% Mo-uranium alloys ground powders. The plate were irradiated at OSIRIS reactor in IRIS device up to 67.5% peak burnup within the range of 136 W.cm - '2 for the heat flux and 72 deg. C for the cladding temperature. After each reactor cycle the plates thickness were measured. The results show no swelling behaviour differences versus burnup between UMo7 and UMo9 plates. The maximum plate swelling for peak burnup location remains lower than 6%. The wide set of PIE has shown that, within the studied irradiation conditions, the interaction product have a global formulation of '(U-Mo)Al -7 ' and that there is no aluminium dissolution in UMo particles. IRIS1 experiment, as the first step of the UMo fuel qualification for research reactor, has established the good behaviour of UMo7 and UMo9 high uranium loading full-sized plate within the tested conditions. (author)
Initial Tests on First Full-size Endcap Crystals

CERN Document Server

Davies, Gavin; Lecoq, Paul; Marcos, Roger; Schneegans, Marc; Sempere-Roldan, P

1999-01-01

At the end of last year the first full size ECAL endcap crystals were delivered to CERN.Thirty in number, they were produced to the final geometrical specifications; 220mm long with a rear square face of 30mm and a front square face of 28.6mm. All were de livered polished. The visual inspection, dimension, transmission, light yield and light yield uniformity tests carried out since are discussed, with particular emphasis on the light yield uniformity. The results are very encouraging.
Assistance in MSD Research and Development: Part 2, Full scale field testing at mining operations: Final report

Energy Technology Data Exchange (ETDEWEB)

Worsey, P.N.; Canon, C.

1988-06-01

Full scale and field testing of a simple mechanical stemming aid is described. The aid comprises a solid unit placed in the stemming above the explosive column and is designed to improve blasting efficiency and reduce drilling and blasting costs. It is designed to work with back filled drill cuttings or any other suitable stemming material. The results of Phase I testing were highly successful, indicating that the stemming aid has technically an extremely good chance of success at full scale when constructed of low cost materials. Phase II of the stemming aid research and development program comprised of the testing of various forms of the stemming is at full scale in non-research oriented i.e. field settings. The stemming aid was field tested at 4 different sites for a variety of mining application: First in underground workings at the UMR experimental mine in one and three quarter inch diameter horizontal blast holes incorporated into full blast patterns; three and three and a half inch blast holes at two crushed rock/limestone quarries in the Rolla area and at a surface coal mine operation run by Peabody Coal Company at Lynnville, Indiana in which nine and seven eighths, ten and five eighths and fifteen and a quarter inch diameter blast holes were used for parting and overburden removal. 2 refs., 37 figs., 11 tabs.
Final sonorant sequences in the Celje dialect

Directory of Open Access Journals (Sweden)

Alja Ferme

2006-12-01

Full Text Available In this paper I will analyse final sonorant sequencesin the Celje variety of Slovene. In §2 various definitions of a consonant cluster will be discussed and the definition needed for further development ofthe article will be provided. In §3 I will present pretheoretical arguments against treating all final sonorant sequences as consonant clusters. In addition, a seemingly special behaviour of a small group of sequences will be pointed out. The government phonology framework will be introduced in §4. In §5 the hin the given theoretical framework.
Relativistic analysis of four-body final states

International Nuclear Information System (INIS)

Adhikari, S.K.

1977-01-01

The constraints of unitarity and analyticity on four-body final states are studied. It is shown that unitarity alone forces the amplitudes to be coherent and have singular behaviour. The implementation of unitarity with total energy analyticity yields a set of relativistic linear integral equations for the four-body amplitude. This is the minimal set consistent with quantum mechanics and also is the full dynamical set of equations with two-body separable interactions. These equations will provide important ingredients for the phenomenological analysis of four-body final states using the isobar model. (Auth.)
Charging valve of the full hydraulic braking system

Directory of Open Access Journals (Sweden)

Jinshi Chen

2016-03-01

Full Text Available It is known that the full hydraulic braking system has excellent braking performance. As the key component of the full hydraulic braking system, the parameters of the accumulator charging valve have a significant effect on the braking performance. In this article, the key parameters of the charging valve are analyzed through the static theoretical and an Advanced Modeling Environment for performing Simulation of engineering systems (AMESim simulation model of the dual-circuit accumulator charging valve is established based on the real structure parameters first. Second, according to the results of the dynamic simulation, the dynamic characteristics of the charging pressure, the flow rate, and the frequency of the charging valve are studied. The key parameters affecting the serial production are proposed and some technical advices for improving the performance of the full hydraulic system are provided. Finally, the theoretical analysis is validated by the simulation results. The comparison between the simulation results and the experimental results indicates that the simulated AMESim model of the charging valve is accurate and credible with the error rate inside 0.5% compared with the experimental result. Hence, the performance of the charging valve meets the request of the full hydraulic braking system exactly.
Terry Turbopump Expanded Operating Band Full-Scale Component and Basic Science Detailed Test Plan - Final.

Energy Technology Data Exchange (ETDEWEB)

Osborn, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Solom, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-02-01

This document details the milestone approach to define the true operating limitations (margins) of the Terry turbopump systems used in the nuclear industry for Milestone 3 (full-scale component experiments) and Milestone 4 (Terry turbopump basic science experiments) efforts. The overall multinational-sponsored program creates the technical basis to: (1) reduce and defer additional utility costs, (2) simplify plant operations, and (3) provide a better understanding of the true margin which could reduce overall risk of operations.
Electric Energy Consumption of the Full Scale Research Biogas Plant “Unterer Lindenhof”: Results of Longterm and Full Detail Measurements

Directory of Open Access Journals (Sweden)

Thomas Jungbluth

2012-12-01

Full Text Available This work thoroughly evaluates the electric power consumption of a full scale, 3 × 923 m3 complete stirred tank reactor (CSTR research biogas plant with a production capacity of 186 kW of electric power. The plant was fed with a mixture of livestock manure and renewable energy crops and was operated under mesophilic conditions. This paper will provide an insight into precise electric energy consumption measurements of a full scale biogas plant over a period of two years. The results showed that a percentage of 8.5% (in 2010 and 8.7% (in 2011 of the produced electric energy was consumed by the combined heat and power unit (CHP, which was required to operate the biogas plant. The consumer unit agitators with 4.3% (in 2010 and 4.0% (in 2011 and CHP unit with 2.5% (in 2010 and 2011 accounted for the highest electrical power demand, in relation to the electric energy produced by the CHP unit. Calculations show that 51% (in 2010 and 46% (in 2011 of the total electric energy demand was due to the agitators. The results finally showed the need for permanent measurements to identify and quantify the electric energy saving potentials of full scale biogas plants.
Full reflector thickness and isolation thickness on neutron transport

International Nuclear Information System (INIS)

Sakai, Tomohiro; Naito, Yoshitaka; Komuro, Yuichi.

1988-08-01

A method to determine ''full reflector thickness'' and ''isolation thickness'', which is utilized for criticality safety evaluation on nuclear fuel facilities, was proposed in this paper. Firstly, a calculation was tryed to obtain the two kinds of thicknesses from the result of criticality calculations for a specific case. Then, two simple equations which calculates the two kinds of thicknesses were made from the relation between reflector (or isolator) thickness and k eff , and one-group diffusion theory. Finally, we proposed a new method to determine the thicknesses. From the method we proposed, ''full reflector thickness'' and ''isolation thickness'' can be obtain using the equations and migration length of the reflector (or isolator) and infinite and effective multiplication factor of the fuel. (author)
Full text

African Journals Online (AJOL)

IndexCopernicus Portal System

2009-05-03

May 3, 2009 ... The patient made an uneventful recovery. The final histopathology report was consistent with metastatic renal carcinoma. The patient was referred to the oncologist but unfortunately defaulted further treatment. . She is currently well and disease free 24 months after metastatectomy. Electronic PDF security ...
How Full is Full Employment? : How Tools and Not Theory Explained Full Employment

NARCIS (Netherlands)

Rodenburg, P.

2016-01-01

The post-war debate on full employment policy was blurred and unclear since the concept of full employment itself was theoretically unclear and un-operational. Unable to theoretically determine the unemployment level of full employment, economists tried to find more empirically based ways to
Review Document: Full Software Trigger

CERN Document Server

Albrecht, J; Raven, G

2014-01-01

This document presents a trigger system for the upgraded LHCb detector, scheduled to begin operation in 2020. This document serves as input for the internal review towards the "DAQ, online and trigger TDR". The proposed trigger system is implemented entirely in software. In this document we show that track reconstruction of a similar quality to that available in the offline algorithms can be performed on the full inelastic $pp$-collision rate, without prior event selections implemented in custom hardware and without relying upon a partial event reconstruction. A track nding eciency of 98.8 % relative to oine can be achieved for tracks with $p_T >$ 500 MeV/$c$. The CPU time required for this reconstruction is about 40 % of the available budget. Proof-of-principle selections are presented which demonstrate that excellent performance is achievable using an inclusive beauty trigger, in addition to exclusive beauty and charm triggers. Finally, it is shown that exclusive beauty and charm selections that do not intr...
General method for final focus system design for circular colliders

Directory of Open Access Journals (Sweden)

Riccardo de Maria

2008-03-01

Full Text Available Colliders use final focus systems to reduce the transverse beam sizes at the interaction point in order to increase collision event rates. The maximum focal strength (gradient of the quadrupoles, and the maximum beam size in them, together limit the beam size reduction that is possible. The goal of a final focus system design is to find the best compromise between quadrupole aperture and quadrupole gradient, for the magnet technology that is used. This paper develops a design method that identifies the intrinsic limitations of a final focus system, validates the results of the method against realistic designs, and reports its application to the upgrade of the Large Hadron Collider final focus.
Full-scale tank car rollover tests - survivability of top fittings and top fittings protective structures : final report.

Science.gov (United States)

2016-05-01

Full-scale rollover crash tests were performed on three non-pressure tank carbodies to validate previous analytical work and : determine the effectiveness of two different types of protective structures in protecting the top fittings. The tests were ...
Analysis of the Correlation between GDP and the Final Consumption

Directory of Open Access Journals (Sweden)

Constantin ANGHELACHE

2011-09-01

Full Text Available This paper presents the results of the researches performed by the author regarding the evolution of Gross Domestic Product. One of the main aspects of GDP analysis is the correlation with the final consumption, an important macroeconomic indicator. The evolution of the Gross Domestic Product is highly influenced by the evolution of the final consumption. To analyze the correlation, the paper proposes the use of the linear regression model, as one of the most appropriate instruments for such scientific approach. The regression model described in the article uses the GDP as resultant variable and the final consumption as factorial variable.
Yuma Border Patrol Lighting Retrofit: Final LED System Performance Assessment of Trial and Full Installation

Energy Technology Data Exchange (ETDEWEB)

Andrea Wilkerson, Gregory P Sullivan, Robert G Davis, Sarah Safranek

2018-04-30

Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial evaluation in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations, and illuminance measurements were recorded initially and at 2500 hours, 5000 hours, 7000, and 11,000 hours of operation. Additionally, four second-generation LED luminaires installed as part of the full installation were evaluated initially and again after 4,000 hours of operation. While the initial energy, lighting quality, and maintenance benefits relative to the incumbent high-pressure sodium system were very satisfactory, the study raises important questions regarding the long-term performance of LED lighting systems in high-temperature environments.
50 CFR 11.17 - Payment of final assessment.

Science.gov (United States)

2010-10-01

... TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND... administrative decision becomes effective in accordance with this part 11, the respondent shall have 20 calendar days from the date of the final administrative decision within which to make full payment of the...

Reserch on energy absorption efficiency in full-duplex multi-user broadcast channel

Directory of Open Access Journals (Sweden)

JIANG Fengju

2015-02-01

Full Text Available This paper studies the user energy scenarios absorption efficiency optimization in multiuser broadcast channel.This paper assumed that the user terminals using full-duplex mode that the user receive uplink energy information and transfer uplink energy at the same time.In this paper,we maximize the minimum user uplink transmit power,when we ensure that each user′s energy absorption efficiency is greater than a threshold value and satisfies the premise of the base station downlink power emission limits.Finally,the simulation results confirm the effectiveness of the proposed algorithm.
An Optimal Analysis in Wireless Powered Full-duplex Relaying Network

Directory of Open Access Journals (Sweden)

K.-T. Nguyen

2017-04-01

Full Text Available Wireless-powered cellular networks (WPCNs are currently being investigated to exploit the reliability and improve battery lifetime of mobile users. This paper investigates the energy harvesting structure of the full-duplex relaying networks. By using the time switching based relaying (TSR protocol and Amplify-and-Forward (AF model in delay-limited transmission scheme, we propose the closed-form expression of the outage probability and then calculate the optimal throughput. An important result can be taken obviously that the time fraction in TSR, the position of relay, the noise as well as the energy conversation impacting on the outage probability as well as the optimal throughput. By Monte Carlo simulation, the numerical results indicate an effective relaying strategy in full-duplex cooperative systems. Finally, we provide fundamental design guidelines for selecting time fraction in TSR that satisfies the requirements of a practical relaying system.
Converting Hangar High Expansion Foam Systems to Prevent Cockpit Damage: Full-Scale Validation Tests

Science.gov (United States)

2017-09-01

AFCEC-CO-TY-TR-2018-0001 CONVERTING HANGAR HIGH EXPANSION FOAM SYSTEMS TO PREVENT COCKPIT DAMAGE: FULL-SCALE VALIDATION TESTS Gerard G...manufacturer, or otherwise does not constitute or imply its endorsement, recommendation , or approval by the United States Air Force. The views and...09-2017 Final Test Report May 2017 Converting Hangar High Expansion Foam Systems to Prevent Cockpit Damage: Full-Scale Validation Tests N00173-15-D
[Integrated Development of Full-automatic Fluorescence Analyzer].

Science.gov (United States)

Zhang, Mei; Lin, Zhibo; Yuan, Peng; Yao, Zhifeng; Hu, Yueming

2015-10-01

In view of the fact that medical inspection equipment sold in the domestic market is mainly imported from abroad and very expensive, we developed a full-automatic fluorescence analyzer in our center, presented in this paper. The present paper introduces the hardware architecture design of FPGA/DSP motion controlling card+PC+ STM32 embedded micro processing unit, software system based on C# multi thread, design and implementation of double-unit communication in detail. By simplifying the hardware structure, selecting hardware legitimately and adopting control system software to object-oriented technology, we have improved the precision and velocity of the control system significantly. Finally, the performance test showed that the control system could meet the needs of automated fluorescence analyzer on the functionality, performance and cost.
Physics with Tau Lepton Final States in ATLAS

Directory of Open Access Journals (Sweden)

Pingel Almut M.

2013-05-01

Full Text Available The ATLAS detector records collisions from two high-energetic proton beams circulating in the LHC. An integral part of the ATLAS physics program are analyses with tau leptons in the final state. Here an overview is given over the studies done in ATLAS with hadronically-decaying final state tau leptons: Standard Model cross-section measurements of Z → ττ, W → τν and tt̅ → bb̅ e/μν τhadν; τ polarization measurements in W → τν decays; Higgs searches and various searches for physics beyond the Standard Model.
Seismic inference of 57 stars using full-length Kepler data sets

Directory of Open Access Journals (Sweden)

Creevey Orlagh

2017-01-01

Full Text Available We present stellar properties of 57 stars from a seismic inference using full-length data sets from Kepler (mass, age, radius, distances. These stars comprise active stars, planet-hosts, solar-analogs, and binary systems. We validate the distances derived from the astrometric Gaia-Tycho solution. Ensemble analysis of the stellar properties reveals a trend of mixing-length parameter with the surface gravity and effective temperature. We derive a linear relationship with the seismic quantity ‹r02› to estimate the stellar age. Finally, we define the stellar regimes where the Kjeldsen et al (2008 empirical surface correction for 1D model frequencies is valid.
Ethical aspects of final disposal. Final report

International Nuclear Information System (INIS)

Baltes, B.; Leder, W.; Achenbach, G.B.; Spaemann, R.; Gerhardt, V.

2003-01-01

In fulfilment of this task the Federal Environmental Ministry has commissioned GRS to summarise the current national and international status of ethical aspects of the final disposal of radioactive wastes as part of the project titled ''Final disposal of radioactive wastes as seen from the viewpoint of ethical objectives''. The questions arising from the opinions, positions and publications presented in the report by GRS were to serve as a basis for an expert discussion or an interdisciplinary discussion forum for all concerned with the ethical aspects of an answerable approach to the final disposal of radioactive wastes. In April 2001 GRS held a one-day seminar at which leading ethicists and philosophers offered statements on the questions referred to above and joined in a discussion with experts on issues of final disposal. This report documents the questions that arose ahead of the workshop, the specialist lectures held there and a summary of the discussion results [de
Integration of Full Tensor Gravity and Z-Axis Tipper Electromagnetic Passive Low Frequency EM Instruments for Simultaneous Data Acquisition - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Wieberg, Scott [Bell Geospace, Inc., Houston, TX (United States)

2016-12-02

Ground gravity is a common and useful tool for geothermal exploration. Gravity surveys map density changes in the subsurface that may be caused by tectonic deformation such as faulting, fracturing, plutonism, volcanism, hydrothermal alteration, etc. Full Tensor Gravity Gradient (FTG) data has been used for over a decade in both petroleum and mining exploration to map changes in density associated with geologic structure. Measuring the gravity gradient, rather than the gravity field, provides significantly higher resolution data. Modeling studies have shown FTG data to be a viable tool for geothermal exploration, but no FTG data had been acquired for geothermal applications to date. Electromagnetic methods have been used for geothermal exploration for some time. The Z-Axis Tipper Electromagnetic (ZTEM) was a newer technology that had found success in mapping deep conductivity changes for mining applications. ZTEM had also been used in limited tests for geothermal exploration. This newer technology provided the ability to cost effectively map large areas whilst detailing the electrical properties of the geological structures at depths. The ZTEM is passive and it uses naturally occurring audio frequency magnetic (AFMAG) signals as the electromagnetic triggering source. These geophysical methods were to be tested over a known geothermal site to determine whether or not the data provided the information required for accurately interpreting the subsurface geologic structure associated with a geothermal deposit. After successful acquisition and analysis of the known source area, an additional survey of a “greenfield” area was to be completed. The final step was to develop a combined interpretation model and determine if the combination produced a higher confident geophysical model compared to models developed using each of the technologies individually.
Full-Duplex opportunistic relay selection in future spectrum-sharing networks

KAUST Repository

Khafagy, Mohammad Galal; Alouini, Mohamed-Slim; Aï ssa, Sonia

2015-01-01

We propose and analyze the performance of full-duplex relay selection in primary/secondary spectrum-sharing networks. Contrary to half-duplex relaying, full-duplex relaying (FDR) enables simultaneous listening/forwarding at the secondary relay, thereby allowing for a higher spectral efficiency. However, since the source and relay simultaneously transmit in FDR, their superimposed signal at the primary receiver should now satisfy the existing interference constraint which can considerably limit the secondary network throughput. In this regard, relay selection can offer an adequate solution to boost the secondary throughput while satisfying the imposed interference limit. We first analyze the performance of opportunistic relay selection among a cluster of full-duplex decode-and-forward relays with self-interference by deriving the exact cumulative distribution function of its end-to-end signal-to-noise ratio. Second, we evaluate the end-to-end performance of relay selection with interference constraints due to the presence of a primary receiver. Finally, the presented exact theoretical findings are verified by numerical simulations.
Full-Duplex opportunistic relay selection in future spectrum-sharing networks

KAUST Repository

Khafagy, Mohammad Galal

2015-06-01

We propose and analyze the performance of full-duplex relay selection in primary/secondary spectrum-sharing networks. Contrary to half-duplex relaying, full-duplex relaying (FDR) enables simultaneous listening/forwarding at the secondary relay, thereby allowing for a higher spectral efficiency. However, since the source and relay simultaneously transmit in FDR, their superimposed signal at the primary receiver should now satisfy the existing interference constraint which can considerably limit the secondary network throughput. In this regard, relay selection can offer an adequate solution to boost the secondary throughput while satisfying the imposed interference limit. We first analyze the performance of opportunistic relay selection among a cluster of full-duplex decode-and-forward relays with self-interference by deriving the exact cumulative distribution function of its end-to-end signal-to-noise ratio. Second, we evaluate the end-to-end performance of relay selection with interference constraints due to the presence of a primary receiver. Finally, the presented exact theoretical findings are verified by numerical simulations.
Final Energy Consumption Trends and Drivers in Czech Republic and Latvia

Directory of Open Access Journals (Sweden)

Zhiqian Yu

2017-08-01

Full Text Available This paper analyses the trends of final energy consumption in Latvia and Czech Republic. Analysis of final energy consumption during 2000-2013 period indicated the main driving forces of final energy consumption during and after world financial crisis of 2008. The paper aimed to evaluate the impact of economic activity and other factors on final energy consumption. The decomposition of the final energy consumption is assessed by analyzing effect of different drivers by the main end-users sector (industry, transport, households, agriculture, services, activity, demography, lifestyles, structural effects, energy savings etc. The results show that the reduction in final energy consumption in most EU members states before and after year 2008 can be related to the decline in energy intensities within endusers sectors. At the same time, the increase in final energy intensity after the year 2008 is attributed to expansion of energy demand sectors. Comparison of final energy consumption trends and drivers in Latvia and Czech Republic indicated that Czech Republic implemented more policies and measures in industry and tertiary sector and this provided for final energy consumption decreased and huge energy savings in these sectors.
A plane-wave final-state theory of ATI

International Nuclear Information System (INIS)

Parker, J.S.; Clark, C.W.

1993-01-01

A Fermi Golden Rule calculation of ionization cross-sections provides us with the simplest example of a plane-wave final-state theory. In this method the final (unbound) state is modeled as a plane wave, an approximation that generally gives best results in the high energy limit in which the affect of the atomic potential on the final state can be neglected. A cross-section is then calculated from the matrix element connecting the bound initial state with the final state. The idea of generalizing this method to model transitions among unbound states is credited to L.V. Keldysh, and a number of related formalisms have been proposed that are consistent with the general features of experimental data. Here we describe a plane-wave final-state model of ATI that is in the spirit of these theories, but differs significantly in its implementation and predictions. We will present a comparison of the predictions of the plane-wave model with those of a full numerical integration of the time-dependent Schrodinger equation for atomic hydrogen in a radiation field. The theory and the numerical integration give good qualitative agreement in their predictions of photoelectron spectra over about 14 orders of magnitude
Full simulation of the beam-related backgrounds at the ILC

Energy Technology Data Exchange (ETDEWEB)

Schuetz, Anne [DESY (Germany); KIT (Germany)

2016-07-01

The ILC has been proposed as the next machine at the energy frontier and a Technical Design Report was presented in 2012. As part of the site-specific studies to prepare the hosting of the ILC in Japan, the final focus region of the ILC had to be adapted. In this contribution, updated results for the beam-related background as well as new results for the backgrounds originating from the beam dump are presented. The beam-related backgrounds are simulated using GuineaPig and are then propagated through the full simulation of the SiD detector. The impact of various modifications in the final-focus region on the detector occupancies are then evaluated. For the neutron background from the beam dump, the FLUKA simulation suite is used, which is well established for dosimetry and shielding studies. With this program, the effect of the neutrons from the ILC beam dumps on the ILC detectors are studied.
Global full-f gyrokinetic simulations of plasma turbulence

International Nuclear Information System (INIS)

Grandgirard, V; Sarazin, Y; Angelino, P; Bottino, A; Crouseilles, N; Darmet, G; Dif-Pradalier, G; Garbet, X; Ghendrih, Ph; Jolliet, S; Latu, G; Sonnendruecker, E; Villard, L

2007-01-01

Critical physical issues can be specifically tackled with the global full-f gyrokinetic code GYSELA. Three main results are presented. First, the self-consistent treatment of equilibrium and fluctuations highlights the competition between two compensation mechanisms for the curvature driven vertical charge separation, namely, parallel flow and polarization. The impact of the latter on the turbulent transport is discussed. In the non-linear regime, the benchmark with the Particle-In-Cell code ORB5 looks satisfactory. Second, the transport scaling with ρ * is found to depend both on ρ * itself and on the distance to the linear threshold. Finally, a statistical steady-state turbulent regime is achieved in a reduced version of GYSELA by prescribing a constant heat source
Financiación hipotecaria y consumidor final

Directory of Open Access Journals (Sweden)

Menéndez de la Uz, M. A.

1999-01-01

Full Text Available La Unión Monetaria Europea está generando nuevas posibilidades de financiación hipotecaria. El consumidor final demanda financiación hipotecaria para satisfacer su necesidad de vivienda. La adquisición de vivienda supone la mayor inversión efectuada por el consumidor a lo largo de su vida y, por lo general, este elevado volumen de inversión requiere el endeudamiento del adquirente, constituyendo el préstamo hipotecario su operación financiera más importante. En este trabajo se realiza un estudio, sobre la incidencia que para el consumidor final tiene la desaparición de fronteras monetarias dentro de la Unión Europea en la operación financiera de préstamo hipotecario. Para llevar a cabo el estudio se utiliza la herramienta ofrecida por la Matemática Financiera que nos permitirá evaluar el coste de dicha operación financiera y así poder efectuar un análisis comparativo que será de gran utilidad para el consumidor final.
Full three-dimensional approach to the design and simulation of a radio-frequency quadrupole

Directory of Open Access Journals (Sweden)

B. Mustapha

2013-12-01

Full Text Available We have developed a new full 3D approach for the electromagnetic and beam dynamics design and simulation of a radio-frequency quadrupole (RFQ. A detailed full 3D model including vane modulation was simulated, which was made possible by the ever advancing computing capabilities. The electromagnetic (EM design approach was first validated using experimental measurements on an existing prototype RFQ and more recently on the actual full size RFQ. Two design options have been studied, the original with standard sinusoidal modulation over the full length of the RFQ; in the second design, a trapezoidal modulation was used in the accelerating section of the RFQ to achieve a higher energy gain for the same power and length. A detailed comparison of both options is presented supporting our decision to select the trapezoidal design. The trapezoidal modulation increased the shunt impedance of the RFQ by 34%, the output energy by 15% with a similar increase in the peak surface electric field, but practically no change in the dynamics of the accelerated beam. The beam dynamics simulations were performed using three different field methods. The first uses the standard eight-term potential to derive the fields, the second uses 3D fields from individual cell-by-cell models, and the third uses the 3D fields for the whole RFQ as a single cavity. A detailed comparison of the results from TRACK shows a very good agreement, validating the 3D fields approach used for the beam dynamics studies. The EM simulations were mainly performed using the CST Microwave-Studio with the final results verified using other software. Detailed segment-by-segment and full RFQ frequency calculations were performed and compared to the measured data. The maximum frequency deviation is about 100 kHz. The frequencies of higher-order modes have also been calculated and finally the modulation and tuners effects on both the frequency and field flatness have been studied. We believe that with
Perceived Quality of Full HD Video - Subjective Quality Assessment

Directory of Open Access Journals (Sweden)

Juraj Bienik

2016-01-01

Full Text Available In recent years, an interest in multimedia services has become a global trend and this trend is still rising. The video quality is a very significant part from the bundle of multimedia services, which leads to a requirement for quality assessment in the video domain. Video quality of a streamed video across IP networks is generally influenced by two factors “transmission link imperfection and efficiency of compression standards. This paper deals with subjective video quality assessment and the impact of the compression standards H.264, H.265 and VP9 on perceived video quality of these compression standards. The evaluation is done for four full HD sequences, the difference of scenes is in the content“ distinction is based on Spatial (SI and Temporal (TI Index of test sequences. Finally, experimental results follow up to 30% bitrate reducing of H.265 and VP9 compared with the reference H.264.
National Computational Infrastructure for Lattice Gauge Theory: Final Report

International Nuclear Information System (INIS)

Richard Brower; Norman Christ; Michael Creutz; Paul Mackenzie; John Negele; Claudio Rebbi; David Richards; Stephen Sharpe; Robert Sugar

2006-01-01

This is the final report of Department of Energy SciDAC Grant ''National Computational Infrastructure for Lattice Gauge Theory''. It describes the software developed under this grant, which enables the effective use of a wide variety of supercomputers for the study of lattice quantum chromodynamics (lattice QCD). It also describes the research on and development of commodity clusters optimized for the study of QCD. Finally, it provides some high lights of research enabled by the infrastructure created under this grant, as well as a full list of the papers resulting from research that made use of this infrastructure
Full-Duplex Relay Selection in Cognitive Underlay Networks

KAUST Repository

Khafagy, Mohammad Galal

2017-09-30

In this work, we analyze the performance of full-duplex relay selection (FDRS) in spectrum-sharing networks. Contrary to half-duplex relaying, full-duplex relaying (FDR) enables simultaneous listening/forwarding at the secondary relay(s), thereby allowing for a higher spectral efficiency. However, since the source and relay simultaneously transmit in FDR, their superimposed signal at the primary receiver should now satisfy the existing interference constraint, which can considerably limit the secondary network throughput. In this regard, relay selection can offer an adequate solution to boost the secondary throughput while satisfying the imposed interference limit. We first analyze the performance of opportunistic FDRS with residual self-interference (RSI) by deriving the exact cumulative distribution function of its end-to-end signal-to-interference-plus-noise ratio under Nakagami-m fading. We also evaluate the offered diversity gain of relay selection for different full-duplex cooperation schemes in the presence/absence of a direct source-destination link. When the adopted RSI link gain model is sublinear in the relay power, which agrees with recent research findings, we show that remarkable diversity gain can be recovered even in the presence of an interfering direct link. Second, we evaluate the end-to-end performance of FDRS with interference constraints due to the presence of a primary receiver. Finally, the presented exact theoretical findings are verified by numerical simulations.
Global full-f gyrokinetic simulations of plasma turbulence

Energy Technology Data Exchange (ETDEWEB)

Grandgirard, V [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Sarazin, Y [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Angelino, P [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Bottino, A [Max Plank Institut fr Plasmaphysik, IPP-EURATOM AssociationGarching (Germany); Crouseilles, N [IRMA, Universite Louis Pasteur, 7, rue Rene Descartes, 67084 Strasbourg Cedex (France); Darmet, G [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Dif-Pradalier, G [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Garbet, X [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Ghendrih, Ph [CEA/DSM/DRFC, Association Euratom-CEA, Cadarache, 13108 St Paul-lez-Durance (France); Jolliet, S [CRPP, Association Euratom-Confederation Suisse, EPFL, 1015 Lausanne (Switzerland); Latu, G [LaBRI, 341 Cours Liberation, 33405 Talence Cedex (France); Sonnendruecker, E [IRMA, Universite Louis Pasteur, 7, rue Rene Descartes, 67084 Strasbourg Cedex (France); Villard, L [CRPP, Association Euratom-Confederation Suisse, EPFL, 1015 Lausanne (Switzerland)

2007-12-15

Critical physical issues can be specifically tackled with the global full-f gyrokinetic code GYSELA. Three main results are presented. First, the self-consistent treatment of equilibrium and fluctuations highlights the competition between two compensation mechanisms for the curvature driven vertical charge separation, namely, parallel flow and polarization. The impact of the latter on the turbulent transport is discussed. In the non-linear regime, the benchmark with the Particle-In-Cell code ORB5 looks satisfactory. Second, the transport scaling with {rho}{sub *} is found to depend both on {rho}{sub *} itself and on the distance to the linear threshold. Finally, a statistical steady-state turbulent regime is achieved in a reduced version of GYSELA by prescribing a constant heat source.

Expectations in multi-particle production in hh collisions in the TeV energy region. Full phase space

International Nuclear Information System (INIS)

Giovannini, A.

1999-01-01

First results of our programme of investigation of final charged particles multiplicity distributions properties in the TeV region and related correlation structure in hadron hadron collisions in full phase space, in rapidity and in transverse momentum intervals, are discussed. Attention is limited here to full phase space only-Huge (mini-)jets production is the main expectation in all examined scenarios. (author)
The Impact of Supply Chain Cost on the Price of the Final Product

Directory of Open Access Journals (Sweden)

Indrė Lapinskaitė

2014-06-01

Full Text Available Nowadays, as consumption and production are growing enormously fast, companies are seeking for costs reduction aimed at ensuring competitiveness. In manufacturing companies, supply chain expenses play a colossal role in the cost of the final product. This paper focuses on the main processes in the logistics chain and their components. The authors analyse the relationship between the sup- ply chain expenses and the price of the final product, the classification of logistics chain costs and their minimization as an assumption for the competitiveness of the final price.
Final Report

Energy Technology Data Exchange (ETDEWEB)

Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

2015-01-12

This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.
Purchasing motors under consideration of full-cost pricing

International Nuclear Information System (INIS)

Mauchle, P.; Ritz, Ch.

2007-01-01

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how full-cost pricing should be considered when purchasing electric motors. The authors consider it essential that the overall life-cycle costs are carefully considered. This also guarantees economical operation and enables users to avoid unexpected costs throughout the service life of the motor. The aim of this project was to provide industrial companies with suitable tools for calculating the overall life-cycle costs of motors at the time of their acquisition. These tools take the form of a sample 'Call for Tender' for motors along with software for calculating life-cycle costs. The factors involved, such as investment, installation costs, energy and environmental costs as well as operational, maintenance and disposal costs are examined.
Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Schuur, Edward [Northern Arizona Univ., Flagstaff, AZ (United States); Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States)

2016-12-01

This final grant report is a continuation of the final grant report submitted for DE-SC0006982 as the Principle Investigator (Schuur) relocated from the University of Florida to Northern Arizona University. This report summarizes the original project goals, as well as includes new project activities that were completed in the final period of the project.
Effect of occlusion amblyopia after prescribed full-time occlusion on long-term visual acuity outcomes.

Science.gov (United States)

Longmuir, Susannah; Pfeifer, Wanda; Scott, William; Olson, Richard

2013-01-01

To investigate the incidence and characteristics of occlusion amblyopia with prescribed full-time patching and determine its effect on long-term visual acuity outcomes. The records of patients younger than 10 years diagnosed as having amblyopia between 1970 and 2000 were retrospectively reviewed. Patients were prescribed full-time occlusion and observed until completion of therapy. Of 597 patients treated for amblyopia by full-time patching, 115 were diagnosed as having occlusion amblyopia (19.3%). Seventy-five percent (86 of 115) developed occlusion amblyopia during the first episode of full-time patching. Occlusion amblyopia occurred more frequently in children prescribed full-time patching at an earlier age (P = .0002), with an odds ratio of 8.56 (95% confidence interval: 2.73, 26.84) in children younger than 36 months and 2.66 (95% confidence interval: 0.96, 7.37) in children between 36 and 59 months old. Seven of the patients with occlusion amblyopia did not reverse fixation and continued to fixate with the initially amblyopic eye after treatment. Final visual acuity in these eyes with occlusion amblyopia was 20/30 or better. After cessation of treatment, the final interocular difference in visual acuity was less in patients with a history of occlusion amblyopia (P = .003). Occlusion amblyopia occurred at all ages, but the incidence decreased with increasing age. Patients who developed occlusion amblyopia with prescribed full-time occlusion had less interocular visual acuity difference than patients who did not, suggesting that development of occlusion amblyopia can indicate the potential for the development of better vision in the originally amblyopic eye. Copyright 2013, SLACK Incorporated.
Report on the design and operation of a full-scale anaerobic dairy manure digester. Final report

Energy Technology Data Exchange (ETDEWEB)

Coppinger, E.; Brautigam, J.; Lenart, J.; Baylon, D.

1979-12-01

A full-scale anaerobic digester on the Monroe State Dairy Farm was operated and monitored for 24 months with funding provided by the United States Department of Energy, Fuels from Biomass Systems Branch. During the period of operation, operating parameters were varied and the impact of those changes is described. Operational experiences and system component performance are discussed. Internal digester mixing equipment was found to be unnecessary, and data supporting this conclusion are given. An influent/effluent heat exchanger was installed and tested, and results of the tests are included. Recommendations for digester design and operation are presented. Biological stability was monitored, and test results are given. Gas production rates and system net energy are analyzed. The economics of anaerobic digestion are evaluated based on various financing options, design scales, and expected benefits. Under many circumstances digesters are feasible today, and a means of analysis is given.
Full Scale Test of a SSP 34m boxgirder 2

DEFF Research Database (Denmark)

Jensen, Find Mølholt; Branner, Kim; Nielsen, Per Hørlyk

was part of a proof of concept investigation for a patent. The tests were performed at the Blaest test facility in August 2007. The tests are an important part of a research project established in cooperation between Risø National Laboratory for sustainable energy – Technical university of Denmark, SSP......This report presents the setup and result from three static full-scale tests of the reinforced glass fiber/epoxy box girder used in a 34m wind turbine blade. One test was without reinforcement one with cap reinforcement and the final test was with rib reinforcement. The cap reinforcement test......-Technology A/S and Blaest (Blade test centre A/S) and it has been performed as a part of Find Mølholt Jensen’s PhD thesis. This report is the second data report containing the complete test data for the three full-scale tests. This report deals only with the test methods and the obtained results...
Full-color, large area, transmissive holograms enabled by multi-level diffractive optics.

Science.gov (United States)

Mohammad, Nabil; Meem, Monjurul; Wan, Xiaowen; Menon, Rajesh

2017-07-19

We show that multi-level diffractive microstructures can enable broadband, on-axis transmissive holograms that can project complex full-color images, which are invariant to viewing angle. Compared to alternatives like metaholograms, diffractive holograms utilize much larger minimum features (>10 µm), much smaller aspect ratios (30 mm ×30 mm). We designed, fabricated and characterized holograms that encode various full-color images. Our devices demonstrate absolute transmission efficiencies of >86% across the visible spectrum from 405 nm to 633 nm (peak value of about 92%), and excellent color fidelity. Furthermore, these devices do not exhibit polarization dependence. Finally, we emphasize that our devices exhibit negligible absorption and are phase-only holograms with high diffraction efficiency.
Summary of the ITER final design report. July 2001

International Nuclear Information System (INIS)

2001-01-01

This document is a summary of the ITER final design report foreseen during the current, Engineering Design Activities (EDA), phase of the ITER project. The report presents the results of collaborative design and supporting technical work undertaken by the ITER Joint Central team (JCT) and the Home Teams (HT) of the parties to the agreement on co-operation in the Engineering Design Activities for ITER (the ITER EDA Agreement). This report marks the achievement of the full technical scope of activities indicated in the ITER EDA Agreement, with a final design which meets the programmatic objective defined in the Agreement and satisfies detailed scientific, technical and costing objectives set by ITER Council in 1998
40 CFR 61.134 - Standard: Naphthalene processing, final coolers, and final-cooler cooling towers.

Science.gov (United States)

2010-07-01

... coolers, and final-cooler cooling towers. 61.134 Section 61.134 Protection of Environment ENVIRONMENTAL... Standard: Naphthalene processing, final coolers, and final-cooler cooling towers. (a) No (“zero”) emissions are allowed from naphthalene processing, final coolers and final-cooler cooling towers at coke by...
Status of the ITER full-tungsten divertor shaping and heat load distribution analysis

International Nuclear Information System (INIS)

Carpentier-Chouchana, S; Hirai, T; Escourbiac, F; Durocher, A; Fedosov, A; Ferrand, L; Kocan, M; Kukushkin, A S; Jokinen, T; Komarov, V; Lehnen, M; Merola, M; Mitteau, R; Pitts, R A; Sugihara, M; Firdaouss, M; Stangeby, P C

2014-01-01

In September 2011, the ITER Organization (IO) proposed to begin operation with a full-tungsten (W) armoured divertor, with the objective of taking a decision on the final target material (carbon fibre composite or W) by the end of 2013. This period of 2 years would enable the development of a full-W divertor design compatible with nuclear operations, the investigation of further several physics R and D aspects associated with the use of W targets and the completion of technology qualification. Beginning with a brief overview of the reference heat load specifications which have been defined for the full-W engineering activity, this paper will report on the current status of the ITER divertor shaping and will summarize the results of related three-dimensional heat load distribution analysis performed as part of the design validation. (paper)
Node Scheduling Strategies for Achieving Full-View Area Coverage in Camera Sensor Networks

Directory of Open Access Journals (Sweden)

Peng-Fei Wu

2017-06-01

Full Text Available Unlike conventional scalar sensors, camera sensors at different positions can capture a variety of views of an object. Based on this intrinsic property, a novel model called full-view coverage was proposed. We study the problem that how to select the minimum number of sensors to guarantee the full-view coverage for the given region of interest (ROI. To tackle this issue, we derive the constraint condition of the sensor positions for full-view neighborhood coverage with the minimum number of nodes around the point. Next, we prove that the full-view area coverage can be approximately guaranteed, as long as the regular hexagons decided by the virtual grid are seamlessly stitched. Then we present two solutions for camera sensor networks in two different deployment strategies. By computing the theoretically optimal length of the virtual grids, we put forward the deployment pattern algorithm (DPA in the deterministic implementation. To reduce the redundancy in random deployment, we come up with a local neighboring-optimal selection algorithm (LNSA for achieving the full-view coverage. Finally, extensive simulation results show the feasibility of our proposed solutions.
Attività conoscitiva sull'Irap. Relazione finale

Directory of Open Access Journals (Sweden)

Commissione Bicamerale Riforma Fiscale

2012-04-01

Full Text Available The article is the final report on TRAP of the Italian Parliamentary Commis-sion on Fiscal Reform (including both members of the Senate and of the Chamber of Deputies. TRAP, a regional tax on productive activities newly introduced two years ago, is levied on value added (including interest pay-ments produced by individual and corporate firms and professional activi-ties. It comes in substitution of a number of previous taxes (additional profit tax, health contributions on payroll and others. The Report analyses the impact of IRAP on firms' behaviour and the shifting of conveniences in adopting labour or capital saving productive pro-cesses, and its short-period impact on labour costs. It also analyses how tax burden is redistributed among firms. Finally, the Report reviews costs and benefits arising from possible revisions aimed at lowering the cost of labour and benefiting small firms. JEL Code: H25.
Morte do G4: ponto final para a Rodada Doha?

Directory of Open Access Journals (Sweden)

Marcos Paulo de Araujo Ribeiro

2007-06-01

Full Text Available O G4 surgiu sob uma aura extremamente promissora. Entretanto, ao final da ultima rodada Doha essa aura se desvaneceu. Assim, o presente artigo busca analisar as possíveis mudanças internas a esse fórum e os impactos que ele exerce sobre a comunidade internacional.
Schedulability Analysis for Java Finalizers

DEFF Research Database (Denmark)

Bøgholm, Thomas; Hansen, Rene Rydhof; Søndergaard, Hans

2010-01-01

Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way....
Full page insight

DEFF Research Database (Denmark)

Cortsen, Rikke Platz

2014-01-01

Alan Moore and his collaborating artists often manipulate time and space by drawing upon the formal elements of comics and making alternative constellations. This article looks at an element that is used frequently in comics of all kinds – the full page – and discusses how it helps shape spatio......, something that it shares with the full page in comics. Through an analysis of several full pages from Moore titles like Swamp Thing, From Hell, Watchmen and Promethea, it is made clear why the full page provides an apt vehicle for an apocalypse in comics....
Design and Voluntary Motion Intention Estimation of a Novel Wearable Full-Body Flexible Exoskeleton Robot

Directory of Open Access Journals (Sweden)

Chunjie Chen

2017-01-01

Full Text Available The wearable full-body exoskeleton robot developed in this study is one application of mobile cyberphysical system (CPS, which is a complex mobile system integrating mechanics, electronics, computer science, and artificial intelligence. Steel wire was used as the flexible transmission medium and a group of special wire-locking structures was designed. Additionally, we designed passive joints for partial joints of the exoskeleton. Finally, we proposed a novel gait phase recognition method for full-body exoskeletons using only joint angular sensors, plantar pressure sensors, and inclination sensors. The method consists of four procedures. Firstly, we classified the three types of main motion patterns: normal walking on the ground, stair-climbing and stair-descending, and sit-to-stand movement. Secondly, we segregated the experimental data into one gait cycle. Thirdly, we divided one gait cycle into eight gait phases. Finally, we built a gait phase recognition model based on k-Nearest Neighbor perception and trained it with the phase-labeled gait data. The experimental result shows that the model has a 98.52% average correct rate of classification of the main motion patterns on the testing set and a 95.32% average correct rate of phase recognition on the testing set. So the exoskeleton robot can achieve human motion intention in real time and coordinate its movement with the wearer.
DIMEC - Final Report

DEFF Research Database (Denmark)

Conrad, Finn

1997-01-01

Final report of the research project DIMEC - Danish InfoMechatronic Control supported by the Danish Technical Research Council, STVF.......Final report of the research project DIMEC - Danish InfoMechatronic Control supported by the Danish Technical Research Council, STVF....
Pharmaceutical Options for Triggering of Final Oocyte Maturation in ART

Directory of Open Access Journals (Sweden)

Juan Carlos Castillo

2014-01-01

Full Text Available Since the pioneering days of in vitro fertilization, hCG has been the gold standard to induce final follicular maturation. We herein reviewed different pharmaceutical options for triggering of final oocyte maturation in ART. The new upcoming agent seems to be GnRHa with its potential advantages over hCG trigger. GnRHa triggering elicits a surge of gonadotropins resembling the natural midcycle surge of gonadotropins, without the prolonged action of hCG, resulting in the retrieval of more mature oocytes and a significant reduction in or elimination of OHSS as compared to hCG triggering. The induction of final follicular maturation using GnRHa represents a paradigm shift in the ovulation triggering concept in ART and, thus, a way to develop a safer IVF procedure. Kisspeptins are key central regulators of the neuroendocrine mechanisms of human reproduction, who have been shown to effectively elicit an LH surge and to induce final oocyte maturation in IVF cycles. This new trigger concept may, therefore, offer a completely new, “natural” pharmacological option for ovulation induction. Whether kisspeptins will be the future agent to trigger ovulation remains to be further explored.

Node Scheduling Strategies for Achieving Full-View Area Coverage in Camera Sensor Networks

Science.gov (United States)

Wu, Peng-Fei; Xiao, Fu; Sha, Chao; Huang, Hai-Ping; Wang, Ru-Chuan; Xiong, Nai-Xue

2017-01-01

Unlike conventional scalar sensors, camera sensors at different positions can capture a variety of views of an object. Based on this intrinsic property, a novel model called full-view coverage was proposed. We study the problem that how to select the minimum number of sensors to guarantee the full-view coverage for the given region of interest (ROI). To tackle this issue, we derive the constraint condition of the sensor positions for full-view neighborhood coverage with the minimum number of nodes around the point. Next, we prove that the full-view area coverage can be approximately guaranteed, as long as the regular hexagons decided by the virtual grid are seamlessly stitched. Then we present two solutions for camera sensor networks in two different deployment strategies. By computing the theoretically optimal length of the virtual grids, we put forward the deployment pattern algorithm (DPA) in the deterministic implementation. To reduce the redundancy in random deployment, we come up with a local neighboring-optimal selection algorithm (LNSA) for achieving the full-view coverage. Finally, extensive simulation results show the feasibility of our proposed solutions. PMID:28587304
Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Glasser, Alan H. [Fusion Theory and Computation Inc., Kingston, WA (United States)

2018-02-02

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.
How Many Presentations Are Published as Full Papers?

Directory of Open Access Journals (Sweden)

Kyu Jin Chung

2012-05-01

Full Text Available BackgroundThe publication rate of presentations at medical international meetings has ranged from 11% to 78% with an average of 45%. To date, there are no studies about the final rate of publications at scientific meetings associated with plastic surgery from Korea. The present authors investigated the publication rate among the presentations at meetings associated with plastic surgery.MethodsThe titles and authors of the abstracts from oral and poster presentations were collected from the program books of the Congress of the Korean Society of Plastic and Reconstructive Surgeons (CKSPRS for 2005 to 2007 (58th-63rd. All of the abstracts presented were searched for using PubMed, KoreaMed, KMbase, and Google Scholar. The titles, key words from the titles, and the authors' names were then entered in database programs. The parameters reviewed included the publication rate, type of presentation including running time, affiliation, subspecialty, time to publication, and publication journal.ResultsA total of 1,176 abstracts presented at the CKSPRS from 2005 to 2007 were evaluated. 38.7% of the abstracts, of which oral presentations accounted for 41.0% and poster presentations 34.8%, were published as full papers. The mean time to publication was 15.04 months. Among journals of publication, the Journal of the Korean Society of Plastic and Reconstructive Surgeons was most used.ConclusionsBrilliant ideas and innovative approaches are being discussed at CKSPRS. The 38.7% publication rate found from this research appeared a bit lower than the average rate of medical meetings. If these valuable presentations are not available as full papers, the research would be a waste of time and effort.
Do continuous assessment results affect final exam outcomes? Evidence from a microeconomics course

Directory of Open Access Journals (Sweden)

Juan Carlos Reboredo

2017-04-01

Full Text Available Continuous assessment aims to enhance student learning and understanding of a subject and so achieve better educational outcomes. We investigated how continuous assessment grades affected final exam grades. Using a dataset for six academic post-Bologna Process years (2009-2015 for a first-year undergraduate microeconomics course offered at a Spanish public university, we examined conditional dependence between continuous assessment and final exam grades. Our results would indicate a limited contribution of continuous assessment results to final exam results: the probability of the final exam performance improving on the continuous assessment grade was lower than the probability of the opposite occurring. A consistent exception, however, was students who obtained an A grade for continuous assessment. Our results would cast some doubt on the beneficial effects of continuous assessment advocated by the Bologna Process.
Final Action Plan to Tiger Team

International Nuclear Information System (INIS)

1992-01-01

This document presents planned actions, and their associated costs, for addressing the findings in the Environmental, Safety and Health Tiger Team Assessment of the Sandia National Laboratories, Albuquerque, May 1991, hereafter called the Assessment. This Final Action Plan should be read in conjunction with the Assessment to ensure full understanding of the findings addressed herein. The Assessment presented 353 findings in four general categories: (1)Environmental (82 findings); (2) Safety and Health (243 findings); (3) Management and Organization (18 findings); and (4) Self-Assessment (10 findings). Additionally, 436 noncompliance items with Occupational Safety and Health Administration (OSHA) standards were addressed during and immediately after the Tiger Team visit
A Concealed Car Extraction Method Based on Full-Waveform LiDAR Data

Directory of Open Access Journals (Sweden)

Chuanrong Li

2016-01-01

Full Text Available Concealed cars extraction from point clouds data acquired by airborne laser scanning has gained its popularity in recent years. However, due to the occlusion effect, the number of laser points for concealed cars under trees is not enough. Thus, the concealed cars extraction is difficult and unreliable. In this paper, 3D point cloud segmentation and classification approach based on full-waveform LiDAR was presented. This approach first employed the autocorrelation G coefficient and the echo ratio to determine concealed cars areas. Then the points in the concealed cars areas were segmented with regard to elevation distribution of concealed cars. Based on the previous steps, a strategy integrating backscattered waveform features and the view histogram descriptor was developed to train sample data of concealed cars and generate the feature pattern. Finally concealed cars were classified by pattern matching. The approach was validated by full-waveform LiDAR data and experimental results demonstrated that the presented approach can extract concealed cars with accuracy more than 78.6% in the experiment areas.
A full-scale prototype for the tracking chambers of the ALICE muon spectrometer. Part II- Electronics. Preamplifier; Read-out prototype

Energy Technology Data Exchange (ETDEWEB)

Courtat, P.; Charlet, D.; Lebon, S.; Martin, J.M.; Sellem, R.; Wanlin, E. [CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France). Service d' Electronique Physique; Douet, R.; Harroch, H.; Bimbot, L.; Jouan, D.; Kharmandarian, L.; Le Bornec, Y.; Mac Cormick, M.; Willis, N. [Paris-11 Univ., 91 - Orsay (France). Institut de Physique Nucleaire

1999-07-01

A full scale prototype of one module of the first tracking station has already been constructed. It will be equipped with the new read-out electronics proposed for the final chambers. Before integration of the whole chain, tests have been carried out on the individual components in discrete circuit prototypes. The different parts of the chain are described, together with the tests performed. The final version with integrated circuits in then described. (author)
A full-scale prototype for the tracking chambers of the ALICE muon spectrometer. Part II- Electronics. Preamplifier; Read-out prototype

International Nuclear Information System (INIS)

Courtat, P.; Charlet, D.; Lebon, S.; Martin, J.M.; Sellem, R.; Wanlin, E.; Douet, R.; Harroch, H.; Bimbot, L.; Jouan, D.; Kharmandarian, L.; Le Bornec, Y.; Mac Cormick, M.; Willis, N.

1999-01-01

A full scale prototype of one module of the first tracking station has already been constructed. It will be equipped with the new read-out electronics proposed for the final chambers. Before integration of the whole chain, tests have been carried out on the individual components in discrete circuit prototypes. The different parts of the chain are described, together with the tests performed. The final version with integrated circuits in then described. (author)
EFFECT OF ULTRASOUND ACTIVATION OF SHS-CHARGE ON THE FINAL PRODUCT

Directory of Open Access Journals (Sweden)

V. V. Klubovich

2016-01-01

Full Text Available The paper describes the effect of ultrasound activation of dolomite, which is used for producing refractory material by the SHS method, on the final product. X-ray investigation has demonstrated that ultrasound activation of the initial charge brings about changes in the phase composition of the synthesized product.
The effect of full denture on memory and depression status in elderly

Directory of Open Access Journals (Sweden)

Bahruddin Thalib

2016-06-01

Full Text Available Complaint that is most often found in elderly is declining or disappearing memory and tooth loss due to aging. Loss of teeth will cause a disturbance in the function of mastication and reportedly may also contribute to the occurrence of memory disorders and depression. The objective of this study was to analyze the influence of full denture use on memory capacity and depression level in elderly. Study conducted at Oral and Dental Hospital Faculty of Dentistry, University of Hasanuddin. This study was clinical experimental with non-randomized design with pre and post test. Sampling with purposive sampling technique, and there were 6 people who are willing to participate. Memory status measurement using Mini-Mental State Exam (MMSE and level of depression using Geriatric Depression Scale (GDS. Memory status and level of depression measurement performed before using full denture and one month after using full denture. Data were analyzed with statistical pair T-test. With a 95% confidence level, the results showed there is an increase in initial MMSE average value (25.67 to the final MMSE average value (26.83 with statistically significant effect, p 0,05. This study concluded that there was significant influence in using full denture on improved memory status of complete edentulous elderly, and despite there were decreased on level of depression, but it was not statistically significant.
Final disposition of MTR fuel

International Nuclear Information System (INIS)

Jonnson, Erik B.

1996-01-01

The final disposition of power reactor fuel has been investigated for a long time and some promising solutions to the problem have been shown. The research reactor fuels are normally not compatible with the zirkonium clad power reactor fuel and can thus not rely on the same disposal methods. The MTR fuels are typically Al-clad UAl x or U 3 Si 2 , HEU resp. LEU with essentially higher remaining enrichment than the corresponding power reactor fuel after full utilization of the uranium. The problems arising when evaluating the conditions at the final repository are the high corrosion rate of aluminum and uranium metal and the risk for secondary criticality due to the high content on fissionable material in the fully burnt MTR fuel. The newly adopted US policy to take back Foreign Research Reactor Spent Fuel of US origin for a period of ten years have given the research reactor society a reasonable time to evaluate different possibilities to solve the back end of the fuel cycle. The problem is, however, complicated and requires a solid engagement from the research reactor community. The task would be a suitable continuation of the RERTR program as it involves both the development of new fuel types and collecting data for the safe long-term disposal of the spent MTR fuel. (author)
Simulation of merging neutron stars in full general relativity

International Nuclear Information System (INIS)

Shibata, M.

2001-01-01

We have performed 3D numerical simulations for merger of equal mass binary neutron stars in full general relativity. We adopt a Γ-law equation of state in the form P = (Γ - 1)ρε where P, ρ, ε and Γ are the pressure, rest mass density, specific internal energy, and the adiabatic constant. As initial conditions, we adopt models of irrotational binary neutron stars in a quasiequilibrium state. Simulations have been carried out for a wide range of Γ and compactness of neutron stars, paying particular attention to the final product and gravitational waves. We find that the final product depends sensitively on the initial compactness of the neutron stars: In a merger between sufficiently compact neutron stars, a black hole is formed in a dynamical timescale. As the compactness is decreased, the formation timescale becomes longer and longer. It is also found that a differentially rotating massive neutron star is formed instead of a black hole for less compact binary cases. In the case of black hole formation, the disk mass around the black hole appears to be very small; less than 1% of the total rest mass. It is indicated that waveforms of high-frequency gravitational waves after merger depend strongly on the compactness of neutron stars before the merger. We point out importance of detecting such gravitational waves of high frequency to constrain the maximum allowed mass of neutron stars. (author)
Full text and figure display improves bioscience literature search.

Directory of Open Access Journals (Sweden)

Anna Divoli

Full Text Available When reading bioscience journal articles, many researchers focus attention on the figures and their captions. This observation led to the development of the BioText literature search engine, a freely available Web-based application that allows biologists to search over the contents of Open Access Journals, and see figures from the articles displayed directly in the search results. This article presents a qualitative assessment of this system in the form of a usability study with 20 biologist participants using and commenting on the system. 19 out of 20 participants expressed a desire to use a bioscience literature search engine that displays articles' figures alongside the full text search results. 15 out of 20 participants said they would use a caption search and figure display interface either frequently or sometimes, while 4 said rarely and 1 said undecided. 10 out of 20 participants said they would use a tool for searching the text of tables and their captions either frequently or sometimes, while 7 said they would use it rarely if at all, 2 said they would never use it, and 1 was undecided. This study found evidence, supporting results of an earlier study, that bioscience literature search systems such as PubMed should show figures from articles alongside search results. It also found evidence that full text and captions should be searched along with the article title, metadata, and abstract. Finally, for a subset of users and information needs, allowing for explicit search within captions for figures and tables is a useful function, but it is not entirely clear how to cleanly integrate this within a more general literature search interface. Such a facility supports Open Access publishing efforts, as it requires access to full text of documents and the lifting of restrictions in order to show figures in the search interface.
Experiences of final year nursing students in their preparedness to become registered nurses

Directory of Open Access Journals (Sweden)

S Carlson

2005-09-01

Full Text Available The objectives of this study were: firstly, to explore and describe the experiences of final year nursing students relating to how they experience their preparedness to fulfil the role of professional nurse; secondly, to explore and describe the experiences of novice professional nurses in the role of professional nurse; finally, to generate a model which will assist the final year nursing student to become a professional nurse. A theory-generative, qualitative, explorative, descriptive and contextual research design was utilized to reach the objectives of the study. Results indicated that final year nursing students experience a lack of confidence to take on the responsibilities of professional nursing. The results are displayed in table form and discussed in the article. This abstract forms part of a bigger study that addresses the professional maturity of the novice professional nurse for the practice of nursing.
Energy-efficient cooperative protocols for full-duplex relay channels

KAUST Repository

Khafagy, Mohammad Galal

2013-12-01

In this work, energy-efficient cooperative protocols are studied for full-duplex relaying (FDR) with loopback interference. In these protocols, relay assistance is only sought under certain conditions on the different link outages to ensure effective cooperation. Recently, an energy-efficient selective decode-And-forward protocol was proposed for FDR, and was shown to outperform existing schemes in terms of outage. Here, we propose an incremental selective decode-And-forward protocol that offers additional power savings, while keeping the same outage performance. We compare the performance of the two protocols in terms of the end-to-end signal-to-noise ratio cumulative distribution function via closed-form expressions. Finally, we corroborate our theoretical results with simulation, and show the relative relay power savings in comparison to non-selective cooperation in which the relay cooperates regardless of channel conditions. © 2013 IEEE.
Energy-efficient cooperative protocols for full-duplex relay channels

KAUST Repository

Khafagy, Mohammad Galal; Ismail, Amr; Alouini, Mohamed-Slim; Aï ssa, Sonia

2013-01-01

In this work, energy-efficient cooperative protocols are studied for full-duplex relaying (FDR) with loopback interference. In these protocols, relay assistance is only sought under certain conditions on the different link outages to ensure effective cooperation. Recently, an energy-efficient selective decode-And-forward protocol was proposed for FDR, and was shown to outperform existing schemes in terms of outage. Here, we propose an incremental selective decode-And-forward protocol that offers additional power savings, while keeping the same outage performance. We compare the performance of the two protocols in terms of the end-to-end signal-to-noise ratio cumulative distribution function via closed-form expressions. Finally, we corroborate our theoretical results with simulation, and show the relative relay power savings in comparison to non-selective cooperation in which the relay cooperates regardless of channel conditions. © 2013 IEEE.
Final Report of the Final Meeting of Project Coordinators

International Nuclear Information System (INIS)

Cordero Calderon, Carlos F.

1996-06-01

The Costa Rican Electricity Institute has always been worried of the verification of the good state of the works and thus to guarantee their operation. For that reason, it has established different sorts of auscultation of the Arenal's Dam. Some investigations have been done to find new methods to improve and to eliminate risks in different works or projects. The Arenal's Dam is one of the greatest engineering works in Costa Rica, it has the Arenal, Corobici and Sandillal Hydroelectric Plants. Furthermore, the irrigation system in the Tempisque River Valley, in the Guanacaste province. One special characteristic of the Site of the Dam, is the near location of the Arenal Volcano, in full activity and located at 6 Km. from the dam. This report has two goals, one is the traditional permanent measurements report for the project, and the other, is to present it as a final work of the Project Arcal XVIII, to the International Atomic Energy Agency. This report analyses the geo-hydraulic, structural and topographic auscultation, as well as the activities accomplished during the ARCAL XVIII /8/018, Application of Tracer Techniques for Leakage in Dams and Damming Project, based on information gathered through the geo-chemical auscultation, until June 1996. (author).30 ills., 80 charts, 35 tabs
Apuntes sobre el tesoro del bronce final llamado de Valdeobispo

Directory of Open Access Journals (Sweden)

Enríquez Navascues, Juan Javier

1991-12-01

Full Text Available The Valdeobispo hoard (Cáceres, Extremadura consists of one necklace and four sol id gold-bracclcts, whose typology is rclatcd to thc final Bronze Age goldwork characterizcd by the influence of Atlantic metallurgy. The most intcresting piece is the necklace, which is very similar to the ones from the Berzocana and Baiocs' hoards.

El tesorillo que se ha denominado de Valdeobispo (Cáceres, Extremadura está constituido por un collar y cuatro brazaletes de oro macizo, cuya tipología lo relaciona con la orfebrería del Bronce final caracterizada por el influjo de las corrientes metalúrgicas atlánticas. La pieza más interesante es el collar, muy parecido a los de los tesoros de Berzocana y Baioes.
How accessibility influences citation counts: The case of citations to the full text articles available from ResearchGate

Directory of Open Access Journals (Sweden)

Mohammad Sababi

2017-08-01

Full Text Available It is generally believed that the number of citations to an article can positively be correlated to its free online availability. In the present study, we investigated the possible impact of academic social networks on the number of citations. We chose the social web service “ResearchGate” as a case. This website acts both as a social network to connect researchers, and at the same time, as an open access repository to publish post-print version of the accepted manuscripts and final versions of open access articles. We collected the data of 1823 articles published by the authors from four different universities. By analyzing these data, we showed that although different levels of full text availability are observed for the four universities, there is always a significant positive correlation between full text availability and the citation count. Moreover, we showed that both post-print version and publisher’s version (i.e., final published version of the archived manuscripts receive more citations than non-OA articles, and the difference in the citation counts of post-print manuscripts and publisher’s version articles is nonsignificant.
Decisiones al final de la vida en México

Directory of Open Access Journals (Sweden)

Edith González Moreno

2015-01-01

Full Text Available El presente ensayo aborda el tema de las decisiones al final de la vida en México (incluyendo el tema de la muerte medi - camente asistida. 2 Las reflexiones parten de algunos indicadores nacionales de mortalidad en nuestro país, donde el fenómeno de muerte en hospitales está apenas siendo igualado al número de muertes que venían ocurriendo fuera de ellos. Por lo anterior y a diferencia de otros países, el foco de atención en las cuestiones relacionadas con el final de la vida no deberá centrarse exclusivamente en el ámbito hospitalario. También se presentan algunos argumentos internacionales, elementos de la legislación vigente, así como la influencia de los paternalismos médico y jurídico en México.

Full-scope training simulators

International Nuclear Information System (INIS)

Ugedo, E.

1986-01-01

The following topics to be covered in this report are: Reasons justifying the use of full-scope simulators for operator qualification. Full-scope simulator description: the control room, the physical models, the computer complex, the instructor's console. Main features of full-scope simulators. Merits of simulator training. The role of full-scope simulators in the training programs. The process of ordering and acquiring a full-scope simulator. Maintaining and updating simulator capabilities. (orig./GL)
Development of first full scope commercial CANDU-6 fuel handling simulator

Energy Technology Data Exchange (ETDEWEB)

Crawford, W., E-mail: BCrawford@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada); McInerney, J. M., E-mail: JMcInerney@nbpower.com [Point Lepreau Generating Station, Maces Bay, NB (Canada); Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M., E-mail: EMoran@atlanticnuclear.ca, E-mail: JNice@atlanticnuclear.ca, E-mail: DSinclair@atlanticnuclear.ca, E-mail: SSomerville@atlanticnuclear.ca, E-mail: ECUsalp@atlanticnuclear.ca, E-mail: MUsalp@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada)

2015-07-01

Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)
Development of first full scope commercial CANDU-6 fuel handling simulator

International Nuclear Information System (INIS)

Crawford, W.; McInerney, J. M.; Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M.

2015-01-01

Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)
VizieR Online Data Catalog: Full spectroscopic data release of the SPT-GMOS (Bayliss+, 2016)

Science.gov (United States)

Bayliss, M. B.; Ruel, J.; Stubbs, C. W.; Allen, S. W.; Applegate, D. E.; Ashby, M. L. N.; Bautz, M.; Benson, B. A.; Bleem, L. E.; Bocquet, S.; Brodwin, M.; Capasso, R.; Carlstrom, J. E.; Chang, C. L.; Chiu, I.; Cho, H.-M.; Clocchiatti, A.; Crawford, T. M.; Crites, A. T.; de Haan, T.; Desai, S.; Dietrich, J. P.; Dobbs, M. A.; Doucouliagos, A. N.; Foley, R. J.; Forman, W. R.; Garmire, G. P.; George, E. M.; Gladders, M. D.; Gonzalez, A. H.; Gupta, N.; Halverson, N. W.; Hlavacek-Larrondo, J.; Hoekstra, H.; Holder, G. P.; Holzapfel, W. L.; Hou, Z.; Hrubes, J. D.; Huang, N.; Jones, C.; Keisler, R.; Knox, L.; Lee, A. T.; Leitch, E. M.; von der Linden, A.; Luong-van, D.; Mantz, A.; Marrone, D. P.; McDonald, M.; McMahon, J. J.; Meyer, S. S.; Mocanu, L. M.; Mohr, J. J.; Murray, S. S.; Padin, S.; Pryke, C.; Rapetti, D.; Reichardt, C. L.; Rest, A.; Ruhl, J. E.; Saliwanchik, B. R.; Saro, A.; Sayre, J. T.; Schaffer, K. K.; Schrabback, T.; Shirokoff, E.; Song, J.; Spieler, H. G.; Stalder, B.; Stanford, S. A.; Staniszewski, Z.; Stark, A. A.; Story, K. T.; Vanderlinde, K.; Vieira, J. D.; Vikhlinin, A.; Williamson, R.; Zenteno, A.

2016-11-01

The data presented in this paper follow the same observational design described by Ruel et al. (2014ApJ...792...45R). The final Gemini-S observing allocation for SPT-GMOS concluded at the end of the 2015B semester. Over the course of the entire survey we observed 121 individual spectroscopic masks targeting 62 SPT-SZ galaxy clusters (see table 1). All final data products from SPT-GMOS are publicly released via the Harvard Dataverse Network (http://dataverse.harvard.edu/dataverse/SPT_Clusters). The galaxy clusters observed in the SPT-GMOS are all drawn from the SPT-SZ survey, completed in 2011 November. The full SPT-SZ survey covered approximately 2500deg2 of the southern sky at 95, 150, and 220GHz with an angular resolution of ~1'. (4 data files).
A solar regenerative thermoelectrochemical converter (RTEC). Executive summary of final subcontract report

Energy Technology Data Exchange (ETDEWEB)

Townsend, C.W.; McHardy, J. [Hughes Aircraft Co., El Segundo, CA (United States)

1992-02-01

This is an executive summary of a final subcontract report that describes the successful completion of a closed-loop demonstration of a regenerative thermoelectromechanical device using solar heat input for the production of electricity. The full report, which contains a detailed description of the two-year effort, is currently subject to a government secrecy order which precludes public release of the information. Copies of the full report will be made available for general release whenever the secrecy order is lifted.
FINALITY OF INDONESIAN CONSTITUTIONAL COURT DECISION IN REGARD TO JUDICIAL REVIEW

Directory of Open Access Journals (Sweden)

Suwarno Abadi

2016-05-01

Full Text Available This article examines the constitutional status of Constitutional Court’s decisions constitutionally guaranteed as final. This status very critical because it could lead Constitutional Court to the judicial supremacy position. This article argues against this possibility. The status of Constitutional Court’s decisions should be critized on the basis that its finality is prima facie, not absolute. As a solution, this article takes a position called departmentalism which means that court and legislature are not supreme in their authority to interpret the constitution. Artikel ini membahas tentang status konstitusional putusan Mahkamah Konstitusi yang dijamin konstitusi bersifat final. Status tersebut sangat kritikal karena dapat mengarahkan Mahkamah Konstitusi ke posisi supremasi yudisial. Artikel ini berargumen tidak setuju atas kemungkinan tersebut. Oleh karena itu, status putusan Mahkamah Konstitusi perlu dikritisi dengan dasar bahwa finalitasnya tersebut bersifat “prima facie”, tidak absolut. Sebagai solusinya, artikel ini mengambil posisi departementalisme yang memiliki pengertian bahwa pengadilan dan legislator tidak memiliki supremasi atas kewenangan untuk melakukan interpretasi konstitusi.
The development of hunger and fullness during a laboratory meal in patients with Binge Eating Disorder

Science.gov (United States)

Samuels, Francine; Zimmerli, Ellen J.; Devlin, Michael J.; Kissileff, Harry R.; Walsh, B. Timothy

2010-01-01

Objective This study aimed to test the hypothesis that, compared to similarly obese participants without BED, individuals with BED have a disturbance in the development of fullness and reduction of hunger during the course of a standard meal of large size. Method Thirteen patients with BED and 14 obese control participants consumed 975 grams of a milkshake. Participants received no information about how much they had eaten or how much of the meal remained to be consumed. Participants were interrupted after every 75 g consumed to rate hunger and fullness. Results Final fullness ratings were higher in patients with BED, but there were no differences in mean duration or mean rate of eating, or in changes in subjective ratings of hunger and fullness per gram of food. Conclusion The current study reports the surprising finding of no difference in reports of hunger and fullness between patients with BED and obese controls. PMID:18803172
MORAL ECONOMY AND FOREST CERTIFICATION - SYSTEMATIC REVIEW OF THE FINAL CONSUMER PERCEPTION

Directory of Open Access Journals (Sweden)

Gustavo Leonardo Simão

2016-08-01

Full Text Available The paper aims to analyze the perception of the final consumer in relation to forest certification. The research was performed through a systematic analysis by integrative contextualista approach, where were identified information on the recognition of the final consumer in relation to forest certification process in seven different countries. The results showed that only a small fraction in the consumer market is aware of the certification process in the forestry sector even in the economically developed regions. The findings show that one of the possible reasons for the increase of production of forest certified products in the last years is less by a requirement of final consumer and more for to a source of the product warranty along to intermediate actors in the forest value chain. There is also the possibility of requirements of forest certification made by intermediaries agents, in forest supply chain, figure as non-tariff barrier. Moreover, the focus of marketing activities for better efficiency should focus its activities not only in the final consumer, should also focus attention on to intermediaries agents.
Are Final Comments in Web Survey Panels Associated with Next-Wave Attrition?

Directory of Open Access Journals (Sweden)

Cynthia McLauchlan

2016-12-01

Full Text Available Near the end of a web survey respondents are often asked whether they have further comments. Such final comments are usually ignored, in part because open-ended questions are challenging to analyse. We explored whether final comments are associated with next-wave attrition in survey panels. We categorized a random sample of final comments in the Longitudinal Studies for the Social Sciences (LISS panel and Dutch Immigrant panel into one of eight categories (neutral, positive, six subcategories of negative and regressed the indicator of next-wave attrition on comment length, comment category and socio-demographic variables. In the Immigrant panel we found shorter final comments (55 words with decreased next-wave attrition relative to making no comment. Comments about unclear survey questions quadruple the odds of attrition and “other” (uncategorized negative comments almost double the odds of attrition. In the LISS panel, making a comment (vs. not and comment length are not associated with attrition. However, when specifying individual comment categories, neutral comments are associated with half the odds of attrition relative to not making a comment.
Reflection and transmission of full-vector X-waves normally incident on dielectric half spaces

KAUST Repository

Salem, Mohamed

2011-08-01

The reflection and transmission of full-vector X-Waves incident normally on a planar interface between two lossless dielectric half-spaces are investigated. Full-vector X-Waves are obtained by superimposing transverse electric and magnetic polarization components, which are derived from the scalar X-Wave solution. The analysis of transmission and reflection is carried out via a straightforward but yet effective method: First, the X-Wave is decomposed into vector Bessel beams via the Bessel-Fourier transform. Then, the reflection and transmission coefficients of the beams are obtained in the spectral domain. Finally, the transmitted and reflected X-Waves are obtained via the inverse Bessel-Fourier transform carried out on the X-wave spectrum weighted with the corresponding coefficient. © 2011 IEEE.
Gain-loss frequency and final outcome in the Soochow Gambling Task: A Reassessment

Directory of Open Access Journals (Sweden)

Lin Ching-Hung

2009-11-01

Full Text Available Abstract Background Behavioral decision making literature suggests that decision makers are guided less by final outcome than by immediate gain-loss. However, studies of the Iowa Gambling Task (IGT under dynamic and uncertain conditions reveal very different conclusions about the role of final outcome. Another research group designed a similar yet simpler game, the Soochow Gambling Task (SGT, which demonstrated that, in dynamic decision making, the effect of gain-loss frequency is more powerful than that of final outcome. Further study is needed to determine the precise effect of final outcome on decision makers. This experiment developed two modified SGTs to explore the effect of final outcome under the same gain-loss frequency context. Methods Each version of the SGT was performed by twenty-four undergraduate Soochow University students. A large-value (± $200, ± $550 and ± $1050 and a small-value (± $100, ± $150 and ± $650 contrast of SGT were conducted to investigate the final outcome effect. The computerized SGT was launched to record and analyze the choices of the participants. Results The results of both SGT versions consistently showed that the preferred decks A and B to decks C and D. Analysis of learning curves also indicated that, throughout the game, final outcome had a minimal effect on the choices of decision makers. Conclusion Experimental results indicated that, in both the frequent-gain context and the frequent-loss context, final outcome has little effect on decision makers. Most decision makers are guided by gain-loss frequency but not by final outcome.
APPRAISAL OF FINAL TAILINGS APPLICABILITY FOR PROCESSING AND PRODUCTION OF MODIFIERS OF IRON-CARBON ALLOYS

Directory of Open Access Journals (Sweden)

A. S. Panasugin

2011-01-01

Full Text Available The methodology of rating of the galvanic final tailings applicability for further processing in the interests of needs of metallurgical production of the Republic Belarus is offered.
75 FR 81765 - Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Final Rule

Science.gov (United States)

2010-12-28

... policy that would allow ``a practical phased effective date for hospitality and commercial facilities... ``hospitality and commercial facilities,'' noting that the need for these entities to ``dispose of their...
Towards automated discrimination of lipids versus peptides from full scan mass spectra

Directory of Open Access Journals (Sweden)

Piotr Dittwald

2014-09-01

Full Text Available Although physicochemical fractionation techniques play a crucial role in the analysis of complex mixtures, they are not necessarily the best solution to separate specific molecular classes, such as lipids and peptides. Any physical fractionation step such as, for example, those based on liquid chromatography, will introduce its own variation and noise. In this paper we investigate to what extent the high sensitivity and resolution of contemporary mass spectrometers offers viable opportunities for computational separation of signals in full scan spectra. We introduce an automatic method that can discriminate peptide from lipid peaks in full scan mass spectra, based on their isotopic properties. We systematically evaluate which features maximally contribute to a peptide versus lipid classification. The selected features are subsequently used to build a random forest classifier that enables almost perfect separation between lipid and peptide signals without requiring ion fragmentation and classical tandem MS-based identification approaches. The classifier is trained on in silico data, but is also capable of discriminating signals in real world experiments. We evaluate the influence of typical data inaccuracies of common classes of mass spectrometry instruments on the optimal set of discriminant features. Finally, the method is successfully extended towards the classification of individual lipid classes from full scan mass spectral features, based on input data defined by the Lipid Maps Consortium.
Northeast Oregon Hatchery Project final siting report. Final report

International Nuclear Information System (INIS)

1995-03-01

This report presents the results of site analysis for the Bonneville Power Administration Northeast Oregon Hatchery Project. The purpose of this project is to provide engineering services for the siting and conceptual design of hatchery facilities for the Bonneville Power Administration. The hatchery project consists of artificial production facilities for salmon and steelhead to enhance production in three adjacent tributaries to the Columbia River in northeast Oregon: the Grande Ronde, Walla Walla, and Imnaha River drainage basins. Facilities identified in the master plan include adult capture and holding facilities; spawning incubation, and early rearing facilities; full-term rearing facilities; and direct release or acclimation facilities. The evaluation includes consideration of a main production facility for one or more of the basins or several smaller satellite production facilities to be located within major subbasins. The historic and current distribution of spring and fall chinook salmon and steelhead was summarized for the Columbia River tributaries. Current and future production and release objectives were reviewed. Among the three tributaries, forty seven sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed
Full scale treatment of phenolic coke coking waste water under unsteady conditions

Energy Technology Data Exchange (ETDEWEB)

Suschka, Jan [Institute for Ecology of Industrial Areas, Katowice (Poland); Morel, Jacek; Mierzwinski, Stanislaw; Januszek, Ryszard [Coke Plant Przyjazn, Dabrowa Gornicza (Poland)

1994-12-31

Phenolic waste water from the largest coke coking plant in Poland is treated at a full technical scale. From the very beginning it became evident that very high qualitative variations in short and long periods were to be expected. For this purpose, the biological treatment plant based on activated sludge is protected through preliminary physical-chemical treatment and the results are secured by a final chemical stage of treatment. Nevertheless, improvements in the performance of the treatment plant have been found necessary to introduce. In this work, the experience gained over the last five years is described and developed improvements were presented. 3 refs., 9 figs., 1 tab.
Full scale treatment of phenolic coke coking waste water under unsteady conditions

Energy Technology Data Exchange (ETDEWEB)

Suschka, Jan [Institute for Ecology of Industrial Areas, Katowice (Poland); Morel, Jacek; Mierzwinski, Stanislaw; Januszek, Ryszard [Coke Plant Przyjazn, Dabrowa Gornicza (Poland)

1993-12-31

Phenolic waste water from the largest coke coking plant in Poland is treated at a full technical scale. From the very beginning it became evident that very high qualitative variations in short and long periods were to be expected. For this purpose, the biological treatment plant based on activated sludge is protected through preliminary physical-chemical treatment and the results are secured by a final chemical stage of treatment. Nevertheless, improvements in the performance of the treatment plant have been found necessary to introduce. In this work, the experience gained over the last five years is described and developed improvements were presented. 3 refs., 9 figs., 1 tab.
Distinguishing the elements of a full product basis set needs only projective measurements and classical communication

International Nuclear Information System (INIS)

Chen Pingxing; Li Chengzu

2004-01-01

Nonlocality without entanglement is an interesting field. A manifestation of quantum nonlocality without entanglement is the possible local indistinguishability of orthogonal product states. In this paper we analyze the character of operators to distinguish the elements of a full product basis set in a multipartite system, and show that distinguishing perfectly these product bases needs only local projective measurements and classical communication, and these measurements cannot damage each product basis. Employing these conclusions one can discuss local distinguishability of the elements of any full product basis set easily. Finally we discuss the generalization of these results to the locally distinguishability of the elements of incomplete product basis set
Imaging cells and sub-cellular structures with ultrahigh resolution full-field X-ray microscopy.

Science.gov (United States)

Chien, C C; Tseng, P Y; Chen, H H; Hua, T E; Chen, S T; Chen, Y Y; Leng, W H; Wang, C H; Hwu, Y; Yin, G C; Liang, K S; Chen, F R; Chu, Y S; Yeh, H I; Yang, Y C; Yang, C S; Zhang, G L; Je, J H; Margaritondo, G

2013-01-01

Our experimental results demonstrate that full-field hard-X-ray microscopy is finally able to investigate the internal structure of cells in tissues. This result was made possible by three main factors: the use of a coherent (synchrotron) source of X-rays, the exploitation of contrast mechanisms based on the real part of the refractive index and the magnification provided by high-resolution Fresnel zone-plate objectives. We specifically obtained high-quality microradiographs of human and mouse cells with 29 nm Rayleigh spatial resolution and verified that tomographic reconstruction could be implemented with a final resolution level suitable for subcellular features. We also demonstrated that a phase retrieval method based on a wave propagation algorithm could yield good subcellular images starting from a series of defocused microradiographs. The concluding discussion compares cellular and subcellular hard-X-ray microradiology with other techniques and evaluates its potential impact on biomedical research. Copyright © 2012 Elsevier Inc. All rights reserved.
Final chlorine dioxide stage at near-neutral pH for bleaching eucalypt pulp

Directory of Open Access Journals (Sweden)

Robisnéa A. Ribeiro

2014-01-01

Full Text Available It is well known that pH is an important parameter for controlling the eucalyptus pulp bleaching when using the final chlorine dioxide stage, since it affects the effectiveness of the process. Recommendations found in the literature for operating are in the 3.5 to 4.0 range. However, in this paper it was shown that final chlorine dioxide has better performance, with significant brightness gain while also preserving pulp quality, when it is operated at near neutral pH. This result can be explained by the generation of sodium bicarbonate in situ upon adding carbon dioxide at this stage.

Poor final visual outcome after traumatic hyphema: A retrospective study of associated factors

Directory of Open Access Journals (Sweden)

Ayda Khalfan Al Ali

2012-09-01

Full Text Available OBJECTIVES: To determine the factors associated with a poor final visual outcome following a non-perforating traumatic hyphema. METHODS: The in-patient records of all traumatic hyphema patients admitted to the Department of Ophthalmology of the Hamad Medical Centre (HMC in Doha, Qatar, were retrospectively reviewed for a four-year period from January 2004 to March 2008. One hundred and seventeen patients who did not meet the exclusion criteria were divided into two groups based on their final visual outcome post-treatment. Group 1 (good outcome consisted of 100 patients with a visual acuity (VA of 6/18 or better and group 2 (worse outcome consisted of 17 patients with a VA of less than 6/18. The two groups were compared to determine the factors associated with a poor final visual outcome. RESULTS: Group 2 patients had an 82.3% incidence of complications after a traumatic hyphema compared with a 21% incidence in group 1. Of these complications, secondary glaucoma and rebleeding were significantly associated with a worse final visual outcome. Trauma from projectiles or blows did not differ significantly in their effect on the final visual outcome, although blow injuries had a greater impact on the final visual outcome. Posterior segment injuries were associated with a worse visual outcome. CONCLUSION: It was concluded that secondary glaucoma, rebleeding, and posterior segment injuries are factors associated with a poor final visual outcome.
Full Ka Band Waveguide-to-Microstrip Inline Transition Design

Science.gov (United States)

Li, Jianxing; Li, Lei; Qiao, Yu; Chen, Juan; Chen, Jianzhong; Zhang, Anxue

2018-05-01

In this paper, a compact and broadband inline waveguide-to-microstrip transition is proposed to cover the full Ka band. The transition can be segmented from the electric point of view into three building blocks, comprising a microstrip line to rectangular coaxial line, a wedged rectangular coaxial line to ridged waveguide, and a final tapered ridged waveguide impedance transformer to standard waveguide. Both good electrical performance and simple modular assembly without any soldering have been simultaneously obtained. The validation of the design concept has been conducted by numerical simulations and experimental measurements. The experimental results of a fabricated back-to-back transition prototype coincide with the simulated results. It shows that the proposed transition achieves good return loss of lower than 15.5 dB and low insertion loss with a fluctuation between 0.23 to 0.60 dB across the entire Ka band. Details of design considerations and operation mechanism as well as simulation and measurement results are presented.
Throughput maximization for buffer-aided hybrid half-/full-duplex relaying with self-interference

KAUST Repository

Khafagy, Mohammad Galal

2015-06-01

In this work, we consider a two-hop cooperative setting where a source communicates with a destination through an intermediate relay node with a buffer. Unlike the existing body of work on buffer-aided half-duplex relaying, we consider a hybrid half-/full-duplex relaying scenario with loopback interference in the full-duplex mode. Depending on the channel outage and buffer states that are assumed available at the transmitters, the source and relay may either transmit simultaneously or revert to orthogonal transmission. Specifically, a joint source/relay scheduling and relaying mode selection mechanism is proposed to maximize the end-to-end throughput. The throughput maximization problem is converted to a linear program where the exact global optimal solution is efficiently obtained via standard convex/linear numerical optimization tools. Finally, the theoretical findings are corroborated with event-based simulations to provide the necessary performance validation.
Viscoelastic material properties' identification using high speed full field measurements on vibrating plates

Science.gov (United States)

Giraudeau, A.; Pierron, F.

2010-06-01

The paper presents an experimental application of a method leading to the identification of the elastic and damping material properties of isotropic vibrating plates. The theory assumes that the searched parameters can be extracted from curvature and deflection fields measured on the whole surface of the plate at two particular instants of the vibrating motion. The experimental application consists in an original excitation fixture, a particular adaptation of an optical full-field measurement technique, a data preprocessing giving the curvature and deflection fields and finally in the identification process using the Virtual Fields Method (VFM). The principle of the deflectometry technique used for the measurements is presented. First results of identification on an acrylic plate are presented and compared to reference values. Details about a new experimental arrangement, currently in progress, is presented. It uses a high speed digital camera to over sample the full-field measurements.
Full-field stress determination in photoelasticity with phase shifting technique

Science.gov (United States)

Guo, Enhai; Liu, Yonggang; Han, Yongsheng; Arola, Dwayne; Zhang, Dongsheng

2018-04-01

Photoelasticity is an effective method for evaluating the stress and its spatial variations within a stressed body. In the present study, a method to determine the stress distribution by means of phase shifting and a modified shear-difference is proposed. First, the orientation of the first principal stress and the retardation between the principal stresses are determined in the full-field through phase shifting. Then, through bicubic interpolation and derivation of a modified shear-difference method, the internal stress is calculated from the point with a free boundary along its normal direction. A method to reduce integration error in the shear difference scheme is proposed and compared to the existing methods; the integration error is reduced when using theoretical photoelastic parameters to calculate the stress component with the same points. Results show that when the value of Δx/Δy approaches one, the error is minimum, and although the interpolation error is inevitable, it has limited influence on the accuracy of the result. Finally, examples are presented for determining the stresses in a circular plate and ring subjected to diametric loading. Results show that the proposed approach provides a complete solution for determining the full-field stresses in photoelastic models.
UKPMC: a full text article resource for the life sciences.

Science.gov (United States)

McEntyre, Johanna R; Ananiadou, Sophia; Andrews, Stephen; Black, William J; Boulderstone, Richard; Buttery, Paula; Chaplin, David; Chevuru, Sandeepreddy; Cobley, Norman; Coleman, Lee-Ann; Davey, Paul; Gupta, Bharti; Haji-Gholam, Lesley; Hawkins, Craig; Horne, Alan; Hubbard, Simon J; Kim, Jee-Hyub; Lewin, Ian; Lyte, Vic; MacIntyre, Ross; Mansoor, Sami; Mason, Linda; McNaught, John; Newbold, Elizabeth; Nobata, Chikashi; Ong, Ernest; Pillai, Sharmila; Rebholz-Schuhmann, Dietrich; Rosie, Heather; Rowbotham, Rob; Rupp, C J; Stoehr, Peter; Vaughan, Philip

2011-01-01

UK PubMed Central (UKPMC) is a full-text article database that extends the functionality of the original PubMed Central (PMC) repository. The UKPMC project was launched as the first 'mirror' site to PMC, which in analogy to the International Nucleotide Sequence Database Collaboration, aims to provide international preservation of the open and free-access biomedical literature. UKPMC (http://ukpmc.ac.uk) has undergone considerable development since its inception in 2007 and now includes both a UKPMC and PubMed search, as well as access to other records such as Agricola, Patents and recent biomedical theses. UKPMC also differs from PubMed/PMC in that the full text and abstract information can be searched in an integrated manner from one input box. Furthermore, UKPMC contains 'Cited By' information as an alternative way to navigate the literature and has incorporated text-mining approaches to semantically enrich content and integrate it with related database resources. Finally, UKPMC also offers added-value services (UKPMC+) that enable grantees to deposit manuscripts, link papers to grants, publish online portfolios and view citation information on their papers. Here we describe UKPMC and clarify the relationship between PMC and UKPMC, providing historical context and future directions, 10 years on from when PMC was first launched.
An Observational Study of Abstracts Presented at the American College of Veterinary Surgeon Annual Meetings (2001-2008) and Their Subsequent Full-Text Publication.

Science.gov (United States)

Meyers, Katherine E; Lindem, Margaret J; Giuffrida, Michelle A

2016-07-01

To determine the frequency of abstracts presented at American College of Veterinary Surgeons (ACVS) meetings from 2001 to 2008 that were published as complete articles, to identify abstract characteristics associated with final full-text publication, and to examine consistency of information between abstracts and final full-text publications. Observational bibliographic study. Abstracts were retrieved from published proceedings. Published articles were retrieved from bibliographic databases. Features of abstract and article authorship, design, and content were recorded. Regression analysis identified abstract features associated with article publication, and evaluated consistency between abstracts and final publications. Seven hundred eighty-two of 1078 (73%) abstracts were published as complete articles. Median time to publication was 1 year; 90% were published within 3 years. Abstracts originating from academic institutions were published more often than abstracts from practice or industry sites (odds ratio 2.61, 95% confidence interval 1.68-4.05). Compared to their conference abstracts, 49% of articles contained major inconsistences including changes in study design, interventions, outcomes, sample size, and results. For each year elapsed between presentation and publication, the odds of major inconsistency increased 2.4 times (odds ratio 2.36, 95% confidence interval 1.57-3.55) for retrospective studies and 1.4 times (odds ratio 1.35, 95% confidence interval 1.17-1.56) for other study designs. Changes in study title and authorship were frequent, particularly in publications that contained major inconsistencies. ACVS abstracts were promptly and reliably published, but final full-text publications often differed substantially from the original abstracts. © Copyright 2016 by The American College of Veterinary Surgeons.
75 FR 62133 - Notice of Availability of Final Environmental Assessment (FINAL EA) and a Finding of No...

Science.gov (United States)

2010-10-07

... Availability of Final Environmental Assessment (FINAL EA) and a Finding of No Significant Impact (FONSI) for... of No Significant Impact (FONSI) for Land Purchase, Access Road Construction and Access Tunnel... Impact (FONSI) based on the Final Environmental Assessment (FINAL EA) for Land Purchase, Access Road...
14 CFR 1214.1105 - Final ranking.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Final ranking. 1214.1105 Section 1214.1105... Recruitment and Selection Program § 1214.1105 Final ranking. Final rankings will be based on a combination of... preference will be included in this final ranking in accordance with applicable regulations. ...
ASDF: An Adaptable Seismic Data Format with Full Provenance

Science.gov (United States)

Smith, J. A.; Krischer, L.; Tromp, J.; Lefebvre, M. P.

2015-12-01

In order for seismologists to maximize their knowledge of how the Earth works, they must extract the maximum amount of useful information from all recorded seismic data available for their research. This requires assimilating large sets of waveform data, keeping track of vast amounts of metadata, using validated standards for quality control, and automating the workflow in a careful and efficient manner. In addition, there is a growing gap between CPU/GPU speeds and disk access speeds that leads to an I/O bottleneck in seismic workflows. This is made even worse by existing seismic data formats that were not designed for performance and are limited to a few fixed headers for storing metadata.The Adaptable Seismic Data Format (ASDF) is a new data format for seismology that solves the problems with existing seismic data formats and integrates full provenance into the definition. ASDF is a self-describing format that features parallel I/O using the parallel HDF5 library. This makes it a great choice for use on HPC clusters. The format integrates the standards QuakeML for seismic sources and StationXML for receivers. ASDF is suitable for storing earthquake data sets, where all waveforms for a single earthquake are stored in a one file, ambient noise cross-correlations, and adjoint sources. The format comes with a user-friendly Python reader and writer that gives seismologists access to a full set of Python tools for seismology. There is also a faster C/Fortran library for integrating ASDF into performance-focused numerical wave solvers, such as SPECFEM3D_GLOBE. Finally, a GUI tool designed for visually exploring the format exists that provides a flexible interface for both research and educational applications. ASDF is a new seismic data format that offers seismologists high-performance parallel processing, organized and validated contents, and full provenance tracking for automated seismological workflows.
Full text and figure display improves bioscience literature search.

Science.gov (United States)

Divoli, Anna; Wooldridge, Michael A; Hearst, Marti A

2010-04-14

When reading bioscience journal articles, many researchers focus attention on the figures and their captions. This observation led to the development of the BioText literature search engine, a freely available Web-based application that allows biologists to search over the contents of Open Access Journals, and see figures from the articles displayed directly in the search results. This article presents a qualitative assessment of this system in the form of a usability study with 20 biologist participants using and commenting on the system. 19 out of 20 participants expressed a desire to use a bioscience literature search engine that displays articles' figures alongside the full text search results. 15 out of 20 participants said they would use a caption search and figure display interface either frequently or sometimes, while 4 said rarely and 1 said undecided. 10 out of 20 participants said they would use a tool for searching the text of tables and their captions either frequently or sometimes, while 7 said they would use it rarely if at all, 2 said they would never use it, and 1 was undecided. This study found evidence, supporting results of an earlier study, that bioscience literature search systems such as PubMed should show figures from articles alongside search results. It also found evidence that full text and captions should be searched along with the article title, metadata, and abstract. Finally, for a subset of users and information needs, allowing for explicit search within captions for figures and tables is a useful function, but it is not entirely clear how to cleanly integrate this within a more general literature search interface. Such a facility supports Open Access publishing efforts, as it requires access to full text of documents and the lifting of restrictions in order to show figures in the search interface.
Evaluation of the ES-2re Dummy in Biofidelity, Component, and Full Vehicle Crash Tests.

Science.gov (United States)

Sutterfield, Aleta; Pecoraro, Katie; Rouhana, Stephen W; Xu, Lan; Abramczyk, Joe; Berliner, Jeff; Irwin, Annette; Jensen, Jack; Mertz, Harold J; Nusholtz, Guy; Pietsch, Hollie; Scherer, Risa; Tylko, Suzanne

2005-11-01

This technical paper presents the results from tests conducted with the ES-2re, a version of the ES-2 side impact dummy that was modified by the National Highway Traffic Safety Administration (NHTSA) to improve its performance in crash tests. Through the series of biofidelity tests conducted on the ES-2re, described in International Standards Organization (ISO) Technical Report (TR)9790 (1999), the OSRP observed a final overall biofidelity ranking of 4.1 for the ES-2re, which corresponds to an ISO classification of "marginal." The biofidelity of the ES-2re is compared to that of the ES-2 and the WorldSID. Repeatability was also evaluated on the ES-2re based on the biofidelity test data. Additional pendulum tests were performed to assess the response of the dummy in oblique loading conditions, and results indicate that oblique loading from the front leads to significantly reduced rib deflections. To evaluate inconsistencies observed in the response of the ES-2, the OSRP analyzed the shoulder biofidelity via additional sled and drop tests. Due to the shoulder design of the ES-2 and ES-2re, the dummies appear to have significant sensitivity to initial conditions, potentially increasing variability in full vehicle tests. Finally, the responses of the ES-2re in full vehicle tests are compared to those of the ES-2 and the WorldSID.
78 FR 43912 - Final Candidate Conservation Agreement with Assurances, Final Environmental Assessment, and...

Science.gov (United States)

2013-07-22

...-FF02ENEH00] Final Candidate Conservation Agreement with Assurances, Final Environmental Assessment, and Finding of No Significant Impact; Rio Grande Cutthroat Trout, New Mexico and Colorado AGENCY: Fish and... environmental assessment (EA) and the draft Finding of No Significant Impact (FONSI) under the National...
Final-state interactions and relativistic effects in the quasielastic (e,e') reaction

International Nuclear Information System (INIS)

Chinn, C.R.; Physics Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545); Picklesimer, A.; Van Orden, J.W.

1989-01-01

The longitudinal and transverse response functions for the inclusive quasielastic (e,e') reaction are analyzed in detail. A microscopic theoretical framework for the many-body reaction provides a clear conceptual (nonrelativistic) basis for treating final-state interactions and goes far beyond simple plane-wave or Hermitean potential models. The many-body physics of inelastic final-state channels as described by optical and multiple scattering theories is properly included by incorporating a full complex optical potential. Explicit nonrelativistic and relativistic momentum-space calculations quantitatively demonstrate the importance of such a treatment of final-state interactions for both the transverse and longitudinal response. Nonrelativistic calculations are performed using final-state interactions based on phenomenology, local density models, and microscopic multiple scattering theory. Relativistic calculations span a similar range of models and employ Dirac bound-state wave functions. The theoretical extension to relativistic dynamics is of course not clear, but is done in obvious parallel to elastic proton scattering. Extensive calculations are performed for 40 Ca at momentum transfers of 410, 550, and 700 MeV/c. A number of interesting physical effects are observed, including significant relativistic suppressions (especially for R L ), large off-shell and virtual pair effects, enhancement of the tails of the response by the final-state interactions, and large qualitative and even shape distinctions between the predictions of the various models of the final-state interactions. None of the models is found to be able to simultaneously predict the data for both response functions. This strongly suggests that additional physical mechanisms are of qualitative importance in inclusive quasielastic electron scattering
High Performance ZVT with Bus Clamping Modulation Technique for Single Phase Full Bridge Inverters

Energy Technology Data Exchange (ETDEWEB)

Xia, Yinglai; Ayyanar, Raja

2016-03-20

This paper proposes a topology based on bus clamping modulation and zero-voltage-transition (ZVT) technique to realize zero-voltage-switching (ZVS) for all the main switches of the full bridge inverters, and inherent ZVS and/or ZCS for the auxiliary switches. The advantages of the strategy include significant reduction in the turn-on loss of the ZVT auxiliary switches which typically account for a major part of the total loss in other ZVT circuits, and reduction in the voltage ratings of auxiliary switches. The modulation scheme and the commutation stages are analyzed in detail. Finally, a 1kW, 500 kHz switching frequency inverter of the proposed topology using SiC MOSFETs has been built to validate the theoretical analysis. The ZVT with bus clamping modulation technique of fixed timing and adaptive timing schemes are implemented in DSP TMS320F28335 resulting in full ZVS for the main switches in the full bridge inverter. The proposed scheme can save up to 33 % of the switching loss compared with no ZVT case.
The Location-Routing Problem with Full Truckloads in Low-Carbon Supply Chain Network Designing

Directory of Open Access Journals (Sweden)

Cheng Chen

2018-01-01

Full Text Available In recent years, low-carbon supply chain network design has been the focus of studies as the development of low-carbon economy. The location-routing problem with full truckloads (LRPFT is investigated in this paper, which extends the existing studies on the LRP to full truckloads problem within the regional many-to-many raw material supply network. A mathematical model with dual objectives of minimizing total cost and environmental effects simultaneously is developed to determine the number and locations of facilities and optimize the flows among different kinds of nodes and routes of trucks as well. A novel multiobjective hybrid approach named NSGA-II-TS is proposed by combining a known multiobjective algorithm, NSGA-II, and a known heuristics, Tabu Search (TS. A chromosome presentation based on natural number and modified partially mapping crossover operator for the LRPFT are designed. Finally, the computational effectiveness of the hybrid approach is validated by the numerical results and a practical case study is applied to demonstrate the tradeoff between total cost and CO2 emission in the LRPFT.
Full Service Leasing

OpenAIRE

Richter, Ján

2009-01-01

Aim of this master thesis is to describe the service of Full Service Leasing, as a modern form of financing and management of assets, primarily automobile fleet. Description of full service leasing is designed as a comprehensive and complete guide to support reader's position when deciding to finance and manage a fleet by this service. Whether the reader is an entrepreneur, CFO, fleet manager, new employee of leasing company, or anyone who is interested in this service, this master thesis wil...
Full-order optimal compensators for flow control: the multiple inputs case

Science.gov (United States)

Semeraro, Onofrio; Pralits, Jan O.

2018-03-01

Flow control has been the subject of numerous experimental and theoretical works. We analyze full-order, optimal controllers for large dynamical systems in the presence of multiple actuators and sensors. The full-order controllers do not require any preliminary model reduction or low-order approximation: this feature allows us to assess the optimal performance of an actuated flow without relying on any estimation process or further hypothesis on the disturbances. We start from the original technique proposed by Bewley et al. (Meccanica 51(12):2997-3014, 2016. https://doi.org/10.1007/s11012-016-0547-3), the adjoint of the direct-adjoint (ADA) algorithm. The algorithm is iterative and allows bypassing the solution of the algebraic Riccati equation associated with the optimal control problem, typically infeasible for large systems. In this numerical work, we extend the ADA iteration into a more general framework that includes the design of controllers with multiple, coupled inputs and robust controllers (H_{∞} methods). First, we demonstrate our results by showing the analytical equivalence between the full Riccati solutions and the ADA approximations in the multiple inputs case. In the second part of the article, we analyze the performance of the algorithm in terms of convergence of the solution, by comparing it with analogous techniques. We find an excellent scalability with the number of inputs (actuators), making the method a viable way for full-order control design in complex settings. Finally, the applicability of the algorithm to fluid mechanics problems is shown using the linearized Kuramoto-Sivashinsky equation and the Kármán vortex street past a two-dimensional cylinder.
10 CFR 51.93 - Distribution of final environmental impact statement and supplement to final environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of final environmental impact statement and supplement to final environmental impact statement; news releases. 51.93 Section 51.93 Energy NUCLEAR... Environmental Impact Statements-General Requirements § 51.93 Distribution of final environmental impact...
Experimental Hydro-Mechanical Characterization of Full Load Pressure Surge in Francis Turbines

Science.gov (United States)

Müller, A.; Favrel, A.; Landry, C.; Yamamoto, K.; Avellan, F.

2017-04-01

Full load pressure surge limits the operating range of hydro-electric generating units by causing significant power output swings and by compromising the safety of the plant. It appears during the off-design operation of hydraulic machines, which is increasingly required to regulate the broad integration of volatile renewable energy sources into the existing power network. The underlying causes and governing physical mechanisms of this instability were investigated in the frame of a large European research project and this paper documents the main findings from two experimental campaigns on a reduced scale model of a Francis turbine. The multi-phase flow in the draft tube is characterized by Particle Image Velocimetry, Laser Doppler Velocimetry and high-speed visualizations, along with synchronized measurements of the relevant hydro-mechanical quantities. The final result is a comprehensive overview of how the unsteady draft tube flow and the mechanical torque on the runner shaft behave during one mean period of the pressure oscillation, thus defining the unstable fluid-structure interaction responsible for the power swings. A discussion of the root cause is initiated, based on the state of the art. Finally, the latest results will enable a validation of recent RANS flow simulations used for determining the key parameters of hydro-acoustic stability models.

Experimental Analysis and Full Prediction Model of a 5-DOF Motorized Spindle

Directory of Open Access Journals (Sweden)

Weiyu Zhang

2017-01-01

Full Text Available The cost and power consumption of DC power amplifiers are much greater than that of AC power converters. Compared to a motorized spindle supported with DC magnetic bearings, a motorized spindle supported with AC magnetic bearings is inexpensive and more efficient. This paper studies a five-degrees-of-freedom (5-DOF motorized spindle supported with AC hybrid magnetic bearings (HMBs. Most models of suspension forces, except a “switching model”, are quite accurate, but only in a particular operating area and not in regional coverage. If a “switching model” is applied to a 5-DOF motorized spindle, the real-time performance of the control system can be significantly decreased due to the large amount of data processing for both displacement and current. In order to solve this defect, experiments based on the “switching model” are performed, and the resulting data are analyzed. Using the data analysis results, a “full prediction model” based on the operating state is proposed to improve real-time performance and precision. Finally, comparative, verification and stiffness tests are conducted to verify the improvement of the proposed model. Results of the tests indicate that the rotor has excellent characteristics, such as good real-time performance, superior anti-interference performance with load and the accuracy of the model in full zone. The satisfactory experimental results demonstrate the effectiveness of the “full prediction model” applied to the control system under different operating stages. Therefore, the results of the experimental analysis and the proposed full prediction model can provide a control system of a 5-DOF motorized spindle with the most suitable mathematical models of the suspension force.
Final Report

Energy Technology Data Exchange (ETDEWEB)

DeTar, Carleton [P.I.

2012-12-10

This document constitutes the Final Report for award DE-FC02-06ER41446 as required by the Office of Science. It summarizes accomplishments and provides copies of scientific publications with significant contribution from this award.
Cocrystallization studies of full-length recombinant butyrylcholinesterase (BChE) with cocaine

Energy Technology Data Exchange (ETDEWEB)

Asojo, Oluwatoyin Ajibola; Asojo, Oluyomi Adebola; Ngamelue, Michelle N.; Homma, Kohei; Lockridge, Oksana (Nebraska-Med)

2011-09-16

Human butyrylcholinesterase (BChE; EC 3.1.1.8) is a 340 kDa tetrameric glycoprotein that is present in human serum at about 5 mg l{sup -1} and has well documented therapeutic effects on cocaine toxicity. BChE holds promise as a therapeutic that reduces and finally eliminates the rewarding effects of cocaine, thus weaning an addict from the drug. There have been extensive computational studies of cocaine hydrolysis by BChE. Since there are no reported structures of BChE with cocaine or any of the hydrolysis products, full-length monomeric recombinant wild-type BChE was cocrystallized with cocaine. The refined 3 {angstrom} resolution structure appears to retain the hydrolysis product benzoic acid in sufficient proximity to form a hydrogen bond to the active-site Ser198.
Developed Turbulence: From Full Simulations to Full Mode Reductions

NARCIS (Netherlands)

Grossmann, Siegfried; Lohse, Detlef; Reeh, Achim

1996-01-01

Developed Navier-Stokes turbulence is simulated with varying wave-vector mode reductions. The flatness and the skewness of the velocity derivative depend on the degree of mode reduction. They show a crossover towards the value of the full numerical simulation when the viscous subrange starts to be
Branching Ratios and Spectral Functions of $\\tau$ Decays final ALEPH measurements and physics implications

CERN Document Server

Schael, S.; Bruneliere, R.; De Bonis, I.; Decamp, D.; Goy, C.; Jezequel, S.; Lees, J.-P.; Martin, F.; Merle, E.; Minard, M.-N.; Pietrzyk, B.; Trocme, B.; Bravo, S.; Casado, M.P.; Chmeissani, M.; Crespo, J.M.; Fernandez, E.; Fernandez-Bosman, M.; Garrido, Ll.; Martinez, M.; Pacheco, A.; Ruiz, H.; Colaleo, A.; Creanza, D.; De Filippis, N.; de Palma, M.; Iaselli, G.; Maggi, G.; Maggi, M.; Nuzzo, S.; Ranieri, A.; Raso, G.; Ruggieri, F.; Selvaggi, G.; Silvestris, L.; Tempesta, P.; Tricomi, A.; Zito, G.; Huang, X.; Lin, J.; Ouyang, Q.; Wang, T.; Xie, Y.; Xu, R.; Xue, S.; Zhang, J.; Zhang, L.; Zhao, W.; Abbaneo, D.; Barklow, T.; Buchmuller, O.; Cattaneo, M.; Clerbaux, B.; Drevermann, H.; Forty, R.W.; Frank, M.; Gianotti, F.; Hansen, J.B.; Harvey, J.; Hutchcroft, D.E.; Janot, P.; Jost, B.; Kado, M.; Mato, P.; Moutoussi, A.; Ranjard, F.; Rolandi, L.; Schlatter, D.; Teubert, F.; Valassi, A.; Videau, I.; Badaud, F.; Dessagne, S.; Falvard, A.; Fayolle, D.; Gay, P.; Jousset, J.; Michel, B.; Monteil, S.; Pallin, D.; Pascolo, J.M.; Perret, P.; Hansen, J.D.; Hansen, J.R.; Hansen, P.H.; Kraan, A.C.; Nilsson, B.S.; Kyriakis, A.; Markou, C.; Simopoulou, E.; Vayaki, A.; Zachariadou, K.; Blondel, A.; Brient, J.-C.; Machefert, F.; Rouge, A.; Videau, H.; Ciulli, V.; Focardi, E.; Parrini, G.; Antonelli, A.; Antonelli, M.; Bencivenni, G.; Bossi, F.; Capon, G.; Cerutti, F.; Chiarella, V.; Laurelli, P.; Mannocchi, G.; Murtas, G.P.; Passalacqua, L.; Kennedy, J.; Lynch, J.G.; Negus, P.; O'Shea, V.; Thompson, A.S.; Wasserbaech, S.; Cavanaugh, R.; Dhamotharan, S.; Geweniger, C.; Hanke, P.; Hepp, V.; Kluge, E.E.; Putzer, A.; Stenzel, H.; Tittel, K.; Wunsch, M.; Phys., Kirchhoff Inst.; Beuselinck, R.; Cameron, W.; Davies, G.; Dornan, P.J.; Girone, M.; Marinelli, N.; Nowell, J.; Rutherford, S.A.; Sedgbeer, J.K.; Thompson, J.C.; White, R.; Ghete, V.M.; Girtler, P.; Kneringer, E.; Kuhn, D.; Rudolph, G.; Bouhova-Thacker, E.; Bowdery, C.K.; Clarke, D.P.; Ellis, G.; Finch, A.J.; Foster, F.; Hughes, G.; Jones, R.W.L.; Pearson, M.R.; Robertson, N.A.; Smizanska, M.; van der Aa, O.; Delaere, C.; Leibenguth, G.; Lemaitre, V.; Blumenschein, U.; Holldorfer, F.; Jakobs, K.; Kayser, F.; Muller, A.-S.; Renk, B.; Sander, H.-G.; Schmeling, S.; Wachsmuth, H.; Zeitnitz, C.; Ziegler, T.; Bonissent, A.; Coyle, P.; Curtil, C.; Ealet, A.; Fouchez, D.; Payre, P.; Tilquin, A.; Ragusa, F.; David, A.; Dietl, H.; Ganis, G.; Huttmann, K.; Lutjens, G.; Manner, W.; Moser, H.-G.; Settles, R.; Villegas, M.; Wolf, G.; Boucrot, J.; Callot, O.; Davier, M.; Duflot, L.; Grivaz, J.-F.; Heusse, Ph.; Hocker, Andreas; Jacholkowska, A.; Serin, L.; Veillet, J.-J.; Yuan, C.Z.; Zhang, Z.Q.; Azzurri, P.; Bagliesi, Giuseppe; Boccali, T.; Foa, L.; Giammanco, A.; Giassi, A.; Ligabue, F.; Messineo, A.; Palla, F.; Sanguinetti, G.; Sciaba, A.; Sguazzoni, G.; Spagnolo, P.; Tenchini, R.; Venturi, A.; Verdini, P.G.; Awunor, O.; Blair, G.A.; Cowan, G.; Garcia-Bellido, A.; Green, M.G.; Medcalf, T.; Misiejuk, A.; Strong, J.A.; Teixeira-Dias, P.; Clifft, R.W.; Edgecock, T.R.; Norton, P.R.; Tomalin, I.R.; Ward, J.J.; Bloch-Devaux, Brigitte; Boumediene, D.; Colas, P.; Fabbro, B.; Lancon, E.; Lemaire, M.-C.; Locci, E.; Perez, P.; Rander, J.; Tuchming, B.; Vallage, G.; Litke, A.M.; Taylor, G.; Booth, C.N.; Cartwright, S.; Combley, F.; Hodgson, P.N.; Lehto, M.; Thompson, L.F.; Bohrer, A.; Brandt, S.; Grupen, C.; Hess, J.; Ngac, A.; Prange, G.; Borean, C.; Giannini, G.; He, H.; Putz, J.; Rothberg, J.; Armstrong, S.R.; Berkelman, Karl; Cranmer, K.; Ferguson, D.P.S.; Gao, Y.; Gonzalez, S.; Hayes, O.J.; Hu, H.; Jin, S.; Kile, J.; McNamara, P.A., III; Nielsen, J.; Pan, Y.B.; von Wimmersperg-Toeller, J.H.; Wiedenmann, W.; Wu, J.; Wu, Sau Lan; Wu, X.; Zobernig, G.; Dissertori, G.

2005-01-01

The full LEP-1 data set collected with the ALEPH detector at the $Z$ pole during 1991-1995 is analysed in order to measure the $\\tau$ decay branching fractions. The analysis follows the global method used in the published study based on 1991-1993 data, but several improvements are introduced, especially concerning the treatment of photons and $\\pi^0$'s. Extensive systematic studies are performed, in order to match the large statistics of the data sample corresponding to over 300\\,000 measured and identified $\\tau$ decays. Branching fractions are obtained for the two leptonic channels and eleven hadronic channels defined by their respective numbers of charged particles and $\\pi^0$'s. Using previously published ALEPH results on final states with charged and neutral kaons, corrections are applied to the hadronic channels to derive branching ratios for exclusive final states without kaons. Thus the analyses of the full LEP-1 ALEPH data are combined to yield a complete description of $\\tau$ decays, encompassing 22...
Full closure strategic analysis.

Science.gov (United States)

2014-07-01

The full closure strategic analysis was conducted to create a decision process whereby full roadway : closures for construction and maintenance activities can be evaluated and approved or denied by CDOT : Traffic personnel. The study reviewed current...
Full scale testing for investigation of wind turbine seismic response

Energy Technology Data Exchange (ETDEWEB)

Prowell, I.; Veletzos, M.; Elgamal, A. [California Univ., San Diego, CA (United States). Dept. of Structural Engineering

2008-07-01

In 2007, much of the growth in wind energy development was concentrated in North America and Asia, two regions which periodically experience strong earthquakes that may impact the final turbine design. As such, rational prediction of seismic hazards must be considered in order to maintain and enhance the ability of wind power to compete economically with other energy sources. In response to this challenge, researchers at the University of California, San Diego (UCSD) have experimentally investigated wind turbines to gain an understanding of expected earthquake forces. This paper described the experimental setup for a full scale shake table test of a 65 kW wind turbine. The turbine was excited perpendicular to the axis of the rotor with a seismic base shaking record scaled to various levels. The data was analyzed using simple but effective procedures to provide insight into the observed structural damping of the wind turbine. The experimental investigation showed that full scale seismic testing of wind turbines is possible and can provide valuable insight into dynamic behaviour of wind turbines. The results can be used to develop a more accurate picture of how wind turbines are impacted by earthquakes. The data regarding the low observed super-structure damping provides a basis for calibration and further development of verified design procedures. 20 refs., 3 tabs.
LISA observations of supermassive black holes: Parameter estimation using full post-Newtonian inspiral waveforms

International Nuclear Information System (INIS)

Trias, Miquel; Sintes, Alicia M.

2008-01-01

We study parameter estimation of supermassive black hole binary systems in the final stage of inspiral using the full post-Newtonian gravitational waveforms. We restrict our analysis to systems in circular orbit with negligible spins, in the mass range 10 8 M · -10 5 M · , and compare the results with those arising from the commonly used restricted post-Newtonian approximation. The conclusions of this work are particularly important with regard to the astrophysical reach of future Laser Interferometer Space Antenna measurements. Our analysis clearly shows that modeling the inspiral with the full post-Newtonian waveform, not only extends the reach to higher mass systems, but also improves in general the parameter estimation. In particular, there are remarkable improvements in angular resolution and distance measurement for systems with a total mass higher than 5x10 6 M · , as well as a large improvement in the mass determination
Identifying Problems in Students’ Final Projects Based on Scientific Writing Guidelines

Directory of Open Access Journals (Sweden)

Endang Ernawati

2010-11-01

Full Text Available Article analyzed student’s difficulties and abilities in writing their final projects, which were undergraduate theses and undergraduate paper conducted by some students at the English Department, Bina Nusantara University. This was a preliminary study to support an appropriate student guideline in writing their final project. The study was conducted by applying qualitative methods that was by analyzing the four theses and one paper in terms of their format: titles, introduction, theoretical background, analysis, conclusion, bibliography, and paper rubric to analyze the contents. It can be concluded that generally, students, guided by their mentor/lecturer, understand the final paper guidelines and they are able to apply it in their thesis and paper. But, there are still lack of clarity and relevancy in expressing their ideas properly, and their ability in writing in both English and Bahasa Indonesia must be improved. These problems can be overcome by socializing the writing guidelines to both students and lecturers, providing them with critical thinking skills, cooperation with library that will guide them in information literacy skills, and language center that will improve their writing skills.
Digitization and simulation realization of full range control system for steam generator water level

International Nuclear Information System (INIS)

Qian Hong; Ye Jianhua; Qian Fei; Li Chao

2010-01-01

In this paper, a full range digital control system for the steam generator water level is designed by a control scheme of single element control and three-element cascade feed-forward control, and the method to use the software module configuration is proposed to realize the water level control strategy. This control strategy is then applied in the operation of the nuclear power simulation machine. The simulation result curves indicate that the steam generator water level maintains constant at the stable operation condition, and when the load changes, the water level changes but finally maintains the constant. (authors)
Gravity packaging final waste recovery based on gravity separation and chemical imaging control.

Science.gov (United States)

Bonifazi, Giuseppe; Serranti, Silvia; Potenza, Fabio; Luciani, Valentina; Di Maio, Francesco

2017-02-01

Plastic polymers are characterized by a high calorific value. Post-consumer plastic waste can be thus considered, in many cases, as a typical secondary solid fuels according to the European Commission directive on End of Waste (EoW). In Europe the practice of incineration is considered one of the solutions for waste disposal waste, for energy recovery and, as a consequence, for the reduction of waste sent to landfill. A full characterization of these products represents the first step to profitably and correctly utilize them. Several techniques have been investigated in this paper in order to separate and characterize post-consumer plastic packaging waste fulfilling the previous goals, that is: gravity separation (i.e. Reflux Classifier), FT-IR spectroscopy, NIR HyperSpectralImaging (HSI) based techniques and calorimetric test. The study demonstrated as the proposed separation technique and the HyperSpectral NIR Imaging approach allow to separate and recognize the different polymers (i.e. PolyVinyl Chloride (PVC), PolyStyrene (PS), PolyEthylene (PE), PoliEtilene Tereftalato (PET), PolyPropylene (PP)) in order to maximize the removal of the PVC fraction from plastic waste and to perform the full quality control of the resulting products, can be profitably utilized to set up analytical/control strategies finalized to obtain a low content of PVC in the final Solid Recovered Fuel (SRF), thus enhancing SRF quality, increasing its value and reducing the "final waste". Copyright © 2016 Elsevier Ltd. All rights reserved.
Search for SUSY in final states with photons at CMS

Directory of Open Access Journals (Sweden)

Ntomari Eleni

2013-05-01

Full Text Available Résumé The Compact Muon Solenoid (CMS collaboration has developed a complete program of searches beyond the Standard Model (SM covering a wide range of final states. This document focuses on searches in final states with photons and missing transverse energy ETmiss organised in three analyses. The first two include comparison of the ETmiss distribution (isolation sideband method in events with either at least two photons plus at least one hadronic jet, or at least one photon plus at least two hadronic jets. The third analysis corresponds to a new approach, the Jet-Gamma Balance (JGB method, for events with at least one photon plus at least three hadronic jets.We observe no significant deviations from the SM expectation and thus derive upper limits on the signal cross section at the 95% confidence level (CL for a range of squark, gluino and neutralino mass points in the Gauge Mediated Supersymmetry Breaking scenario.
On the Outage Performance of Full-Duplex Selective Decode-and-Forward Relaying

KAUST Repository

Khafagy, Mohammad Galal

2013-02-25

We evaluate the outage performance in a three-terminal full-duplex relay channel that adopts a selective decode-and-forward protocol, taking relay self-interference into account. Previous work focused on coverage extension scenarios where direct source-destination transmissions are neglected or considered as interference. In this work, we account for the relay self-interference, and exploit the cooperative diversity offered by the independently fading source/relay message replicas that arrive at the destination. We present an approximate, yet accurate, closed-form expression for the end-to-end outage probability that captures their joint effect. With the derived expression in hand, we propose a relay transmit power optimization scheme that only requires the relay knowledge of channel statistics. Finally, we corroborate our analysis with simulations.
5 CFR 1216.206 - Final determination.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Final determination. 1216.206 Section... PROCEEDINGS Demands or Requests for Testimony and Production of Documents § 1216.206 Final determination. The General Counsel makes the final determination on demands to requests to employees for production of...
45 CFR 150.219 - Final determination.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Final determination. 150.219 Section 150.219... Are Failing To Substantially Enforce HIPAA Requirements § 150.219 Final determination. If, after... the State a written notice of its final determination. The notice includes the following: (a...
Autism in Preschoolers: Does Individual Clinician’s First Visit Diagnosis Agree with Final Comprehensive Diagnosis?

Directory of Open Access Journals (Sweden)

Gunilla Westman Andersson

2013-01-01

Full Text Available Comprehensive clinical diagnosis based on all available information is considered the “gold standard” in autism spectrum disorders (ASD. We examined agreement across independent assessments (clinical judgment of 34 young children (age 24–46 months with suspected ASD, assessed by a multidisciplinary team, and final comprehensive clinical diagnosis. Agreement across settings and between each clinician’s assessment and final diagnosis was moderate. The poorest fit was found at assessment in connection with psychological evaluation and the best with preschool observation and parent interview. Some individual clinicians had good and others had poor fit with final diagnosis. Disagreement across assessments was pronounced for girls. The findings suggest that multidisciplinary assessments remain important and that comprehensive clinical diagnosis should still be regarded as the gold standard in ASD.
Quality Improvement of a Small Water Supply. A Practical Application of a Full System of Nanofiltration

Directory of Open Access Journals (Sweden)

R. Marin Galvin

2013-04-01

Full Text Available The THM level in the Spanish drinking water is limited to less than 0.100 mg/L, due to its potential toxicological effect on humans. This paper investigates the comparison of the results obtained in a small supply of water that historically presented THM contents out of the Spanish normative, versus the results there obtained when the treatment was modified with the inclusion of a nanofiltration system. So, the conventional treatment first applied was that of pre-oxidation with chlorine and/or KMnO4, followed by coagulation with aluminum salts directly on closed sand filter, and disinfection final by chlorination: with this system, THM levels lower than 0.100 mg/L were not always secured. Thus, to improve the water quality, a full system of nanofiltration was implemented, after the above treatment, consisting in: pre-filtration through cartridges, filtration over activated carbon, post-filtration for retaining impurities, and finally, nanofiltration and chlorination of water after nanofiltration. In this order, the new treatment scheme has usually produced water with maximum THM levels of 0.058 mg/L, and average values of 0.013 mg/L, 0.30 mg/L for organic matter concentrations, and water always microbiologically pure. Also, the contents of Fe, Mn and Al in the treated water were significantly reduced with respect to the previous situation without nanofiltration.
Glass-melting using an IGBT full-bridge resonant converter

International Nuclear Information System (INIS)

Pacheco S, J.O.; Gutierrez O, E.; Benitez R, J.S.; Martinez V, J.; Lopez C, R.

1999-01-01

This work describes the design implementation and application of a full-bridge IGBT resonant converter used to obtain glass melting. The design procedure is discussed and complete converter schematics are provided, including drivers and control circuits. A brief review of the glass properties is given, and some coupling parameters of the induction furnace are also described. A very special provision is made to the coupling charge transformer and the heat induced to the glass itself, first by conduction, followed by direct electromagnetic induction when the glass becomes a conductor. A brief analysis of electromagnetic fields, current density and power induced in the material is given. A very simple method is presented to calculate the power absorbed by the load and therefore the efficiency of the heating process. Several tests are carried out to verify the effectiveness of this method. Finally, this paper describes the design and construction of a 5 k W, 50 k Hz Full-Bridge Resonant Converter (FBRC), based on IGBT transistors and a transformer-capacitor coupled to a thermal load composed of a metal-glass cylinder. For glass makers, the benefits obtained by implementing the melting system with an IGBT-based FRBC resides on the relative simplicity of its design, the low-cost of the components, the energy transfer efficiency, and the robustness of its operation. With a proper scaling, this melting system can be used, for instance, to vitrify hazardous industrial wastes, nuclear waste, and fume ashes from melting plants or combustion systems. (Author)
78 FR 69817 - Polyethylene Retail Carrier Bags From Thailand: Final Court Decision and Amended Final Results of...

Science.gov (United States)

2013-11-21

... Bags From Thailand: Final Court Decision and Amended Final Results of Administrative Review of the..., which recalculated the weighted-average duty margin for polyethylene retail carrier bags (PRCBs) from... Packaging at the CIT. \\2\\ See Polyethylene Retail Carrier Bags from Thailand: Final Results and Partial...
Final Report

DEFF Research Database (Denmark)

Heiselberg, Per; Brohus, Henrik; Nielsen, Peter V.

This final report for the Hybrid Ventilation Centre at Aalborg University describes the activities and research achievement in the project period from August 2001 to August 2006. The report summarises the work performed and the results achieved with reference to articles and reports published...

On the Performance of In-Band Full-Duplex Cooperative Communications

KAUST Repository

Khafagy, Mohammad Galal

2016-06-01

block transmission with selective cooperation. Beyond the single-relay setting, the outage performance of different opportunistic full-duplex relay selection (FDRS) protocols is also evaluated under Rayleigh and Nakagami-m fading. It is shown that, with state-of-the-art adaptive self-interference cancellation techniques, FDRS can offer the same diversity order of its half-duplex rival while supporting a higher level of spectral efficiency. FDRS is also analyzed when adopted by a spectrum-sharing secondary system while the primary spectrum user imposes an additional interference constraint. Finally, buffer-aided hybrid half-/full-duplex cooperation is addressed. To maximize the end-to-end throughput, joint duplexing mode and link selection is studied where the system leverages the buffer and outage state information at the transmitters. All theoretic findings are corroborated with numerical simulations, with comparisons to existing protocols.
11 CFR 9409.9 - Final determination.

Science.gov (United States)

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Final determination. 9409.9 Section 9409.9... INFORMATION AND PRODUCTION OF OFFICIAL RECORDS IN LEGAL PROCEEDINGS § 9409.9 Final determination. The General Counsel will make the final determination on demands and requests to employees for production of official...
48 CFR 32.605 - Final decisions.

Science.gov (United States)

2010-10-01

... REQUIREMENTS CONTRACT FINANCING Contract Debts 32.605 Final decisions. (a) The contracting officer shall issue a final decision as required by 33.211 if— (1) The contracting officer and the contractor are unable... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Final decisions. 32.605...
75 FR 50930 - Final Determination To Approve Alternative Final Cover Request for the Lake County, Montana Landfill

Science.gov (United States)

2010-08-18

... Determination To Approve Alternative Final Cover Request for the Lake County, Montana Landfill AGENCY... VIII is making a final determination to approve an alternative final cover for the Lake County landfill, a municipal solid waste landfill (MSWLF) owned and operated by Lake County, Montana on the...
Searches for diboson production at the Tevatron in final states containing heavy-flavor jets

Directory of Open Access Journals (Sweden)

Grivaz Jean-François

2012-06-01

Full Text Available Recent searches performed by the CDF and D0 collaborations at the Tevatron for diboson production in final states containing heavy-flavor jets are reported. The searches for WZ and ZZ can be regarded as the ultimate benchmark for the corresponding searches for a low-mass Higgs boson in the WH and ZH final states. Using the exact same techniques as for those Higgs boson searches, the D0 collaboration measured a cross section for WZ/ZZ production of 1.13 ± 0.36 times its expectation in the standard model, with a diboson signal significance of 3.3 standard deviations (2.9 expected.
Summary of Full-Scale Blade Displacement Measurements of the UH- 60A Airloads Rotor

Science.gov (United States)

Abrego, Anita I.; Meyn, Larry; Burner, Alpheus W.; Barrows, Danny A.

2016-01-01

Blade displacement measurements using multi-camera photogrammetry techniques were acquired for a full-scale UH-60A rotor, tested in the National Full-Scale Aerodynamic Complex 40-Foot by 80-Foot Wind Tunnel. The measurements, acquired over the full rotor azimuth, encompass a range of test conditions that include advance ratios from 0.15 to 1.0, thrust coefficient to rotor solidity ratios from 0.01 to 0.13, and rotor shaft angles from -10.0 to 8.0 degrees. The objective was to measure the blade displacements and deformations of the four rotor blades and provide a benchmark blade displacement database to be utilized in the development and validation of rotorcraft prediction techniques. An overview of the blade displacement measurement methodology, system development, and data analysis techniques are presented. Sample results based on the final set of camera calibrations, data reduction procedures and estimated corrections that account for registration errors due to blade elasticity are shown. Differences in blade root pitch, flap and lag between the previously reported results and the current results are small. However, even small changes in estimated root flap and pitch can lead to significant differences in the blade elasticity values.
32 CFR 536.64 - Final offers.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Final offers. 536.64 Section 536.64 National... UNITED STATES Investigation and Processing of Claims § 536.64 Final offers. (a) When claims personnel... less than the amount claimed, a settlement authority will make a written final offer within his or her...
Deep inelastic final states

International Nuclear Information System (INIS)

Girardi, G.

1980-11-01

In these lectures we attempt to describe the final states of deep inelastic scattering as given by QCD. In the first section we shall briefly comment on the parton model and give the main properties of decay functions which are of interest for the study of semi-inclusive leptoproduction. The second section is devoted to the QCD approach to single hadron leptoproduction. First we recall basic facts on QCD log's and derive after that the evolution equations for the fragmentation functions. For this purpose we make a short detour in e + e - annihilation. The rest of the section is a study of the factorization of long distance effects associated with the initial and final states. We then show how when one includes next to leading QCD corrections one induces factorization breaking and describe the double moments useful for testing such effects. The next section contains a review on the QCD jets in the hadronic final state. We begin by introducing the notion of infrared safe variable and defining a few useful examples. Distributions in these variables are studied to first order in QCD, with some comments on the resummation of logs encountered in higher orders. Finally the last section is a 'gaullimaufry' of jet studies
Closed-loop fault detection for full-envelope flight vehicle with measurement delays

Directory of Open Access Journals (Sweden)

Wang Zhaolei

2015-06-01

Full Text Available A closed-loop fault detection problem is investigated for the full-envelope flight vehicle with measurement delays, where the flight dynamics are modeled as a switched system with delayed feedback signals. The mode-dependent observer-based fault detection filters and state estimation feedback controllers are derived by considering the delays’ impact on the control system and fault detection system simultaneously. Then, considering updating lags of the controllers/filters’ switching signals which are introduced by the delayed measurement of altitude and Mach number, an asynchronous H∞ analysis method is proposed and the system model is further augmented to be an asynchronously switched time-delay system. Also, the global stability and desired performance of the augmented system are guaranteed by combining the switched delay-dependent Lyapunov–Krasovskii functional method with the average dwell time method (ADT, and the delay-dependent existing conditions for the controllers and fault detection filters are obtained in the form of the linear matrix inequalities (LMIs. Finally, numerical example based on the hypersonic vehicles and highly maneuverable technology (HiMAT vehicle is given to demonstrate the merits of the proposed method.
36 CFR 908.33 - Final determination.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Final determination. 908.33... DEVELOPMENT AREA Review Procedure § 908.33 Final determination. (a) The Chairman or designee(s) shall make a final determination on the claim within 45 days of receipt of the file from the Director of Real Estate...
The consistency between scientific papers presented at the Orthopaedic Trauma Association and their subsequent full-text publication.

Science.gov (United States)

Preston, Charles F; Bhandari, Mohit; Fulkerson, Eric; Ginat, Danial; Egol, Kenneth A; Koval, Kenneth J

2006-02-01

To determine the consistency of conclusions/statements made in podium presentations at the annual meeting of the Orthopaedic Trauma Association (OTA) with those in subsequent full-text publications. Also, to evaluate the nature and consistency of study design, methods, sample sizes, results and assign a corresponding level of evidence. Abstracts of the scientific programs of the OTA from 1994 to 1997 (N = 254) were queried by using the PubMed database to identify those studies resulting in a peer-reviewed, full-text publication. Of the 169 articles retrieved, 137 studies were the basis of our study after the exclusion criteria were applied: non-English language, basic science studies, anatomic dissection studies, and articles published in non-peer-reviewed journals. Information was abstracted onto a data form: first from the abstract published in the final meeting program, and then from the published journal article. Information was recorded regarding study issues, including the study design, primary objective, sample size, and statistical methods. We provided descriptive statistics about the frequency of consistent results between abstracts and full-text publications. The results were recorded as percentages and a 95% confidence interval was applied to each value. Study results were recorded for the abstract and full-text publication comparing results and the overall conclusion. A level of scientific-based evidence was assigned to each full-text publication. The final conclusion of the study remained the same 93.4% of the time. The method of study was an observational case series 52% of the time and a statement regarding the rate of patient follow-up was reported 42% of the time. Of the studies published, 18.2% consisted of a sample size smaller than the previously presented abstract. When the published papers had their level of evidence graded, 11% were level I, 16% level II, 17% level III, and 56% level IV. Authors conclusions were consistent with those in full
The full-scale Emplacement (FE) Experiment at the Mont Terri URL

International Nuclear Information System (INIS)

Mueller, H.R.; Weber, H.P.; Koehler, S.; Vogt, T.; Vietor, T.

2012-01-01

Document available in extended abstract form only. The Full-Scale Emplacement (FE) Experiment at the Mont Terri underground research laboratory (URL) is a full-scale heater test in a clay-rich formation. It simulates the construction, waste emplacement and backfilling of a spent fuel (SF) / vitrified high-level waste (HLW) repository tunnel as realistically as possible. The entire experiment implementation as well as the post-closure THM(C) evolution will be monitored using several hundred sensors. These are distributed in the host rock in the near- and far-field, the tunnel lining, the engineered barrier system and on the heaters. The aim of this experiment is to investigate HLW repository-induced thermo-hydro-mechanical (THM) coupled effects on the host rock and the validation of existing coupled THM models. A further aim is the verification of the technical feasibility of constructing a 50 m repository section at full scale with all relevant components using standard industrial equipment. Finally, the experiment will demonstrate the canister and buffer emplacement procedures for underground conditions based on the Swiss disposal concept. Experimental layout The FE experiment is based on the Swiss disposal concept for SF / HLW. The 50 m long test gallery, at the end of the former MB test tunnel in the Mont Terri URL, will be realised with a diameter of approx. 3 m. In the experiment gallery, 3 heaters with dimensions similar to those of waste canisters will be emplaced on top of abutments built of bentonite blocks. The remaining space will be backfilled with compacted bentonite pellets. The experiment will be sealed off towards the start niche with a concrete plug holding the buffer in place and reducing air and water fluxes. The first scoping calculations and design modelling for the 'far-field' instrumentation have been completed; these works have been carried out using CodeBRIGHT and the multiphase flow simulator TOUGH2. With an initial heat output of 1500 W
The hydrogen tunneling splitting in malonaldehyde: A full-dimensional time-independent quantum mechanical method

Energy Technology Data Exchange (ETDEWEB)

Wu, Feng; Ren, Yinghui; Bian, Wensheng, E-mail: bian@iccas.ac.cn [Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

2016-08-21

The accurate time-independent quantum dynamics calculations on the ground-state tunneling splitting of malonaldehyde in full dimensionality are reported for the first time. This is achieved with an efficient method developed by us. In our method, the basis functions are customized for the hydrogen transfer process which has the effect of greatly reducing the size of the final Hamiltonian matrix, and the Lanczos method and parallel strategy are used to further overcome the memory and central processing unit time bottlenecks. The obtained ground-state tunneling splitting of 24.5 cm{sup −1} is in excellent agreement with the benchmark value of 23.8 cm{sup −1} computed with the full-dimensional, multi-configurational time-dependent Hartree approach on the same potential energy surface, and we estimate that our reported value has an uncertainty of less than 0.5 cm{sup −1}. Moreover, the role of various vibrational modes strongly coupled to the hydrogen transfer process is revealed.
Data breaches. Final rule.

Science.gov (United States)

2008-04-11

This document adopts, without change, the interim final rule that was published in the Federal Register on June 22, 2007, addressing data breaches of sensitive personal information that is processed or maintained by the Department of Veterans Affairs (VA). This final rule implements certain provisions of the Veterans Benefits, Health Care, and Information Technology Act of 2006. The regulations prescribe the mechanisms for taking action in response to a data breach of sensitive personal information.
Full-Band Quasi-Harmonic Analysis and Synthesis of Musical Instrument Sounds with Adaptive Sinusoids

Directory of Open Access Journals (Sweden)

Marcelo Caetano

2016-05-01

Full Text Available Sinusoids are widely used to represent the oscillatory modes of musical instrument sounds in both analysis and synthesis. However, musical instrument sounds feature transients and instrumental noise that are poorly modeled with quasi-stationary sinusoids, requiring spectral decomposition and further dedicated modeling. In this work, we propose a full-band representation that fits sinusoids across the entire spectrum. We use the extended adaptive Quasi-Harmonic Model (eaQHM to iteratively estimate amplitude- and frequency-modulated (AM–FM sinusoids able to capture challenging features such as sharp attacks, transients, and instrumental noise. We use the signal-to-reconstruction-error ratio (SRER as the objective measure for the analysis and synthesis of 89 musical instrument sounds from different instrumental families. We compare against quasi-stationary sinusoids and exponentially damped sinusoids. First, we show that the SRER increases with adaptation in eaQHM. Then, we show that full-band modeling with eaQHM captures partials at the higher frequency end of the spectrum that are neglected by spectral decomposition. Finally, we demonstrate that a frame size equal to three periods of the fundamental frequency results in the highest SRER with AM–FM sinusoids from eaQHM. A listening test confirmed that the musical instrument sounds resynthesized from full-band analysis with eaQHM are virtually perceptually indistinguishable from the original recordings.
Considerações sobre o final de análise

Directory of Open Access Journals (Sweden)

Maria Thereza Ávila Dantas Coelho

2008-09-01

Full Text Available Na comunidade psicanalítica, o tema do final de análise sempre permeou a discussão técnico-teórica. Na Escola Lacaniana, especificamente, esse tema adquiriu especial interesse a partir do momento em que Lacan propôs um novo dispositivo de transmissão, o passe, para que novos analistas testemunhassem sobre a sua passagem à condição de analista. Desde então, diferentes concepções lacanianas sobre o final de análise têm surgido e produzido nova discussão. É nesse contexto que este artigo visa a contribuir com esse debate atual, discutindo diversos aspectos, tais como a eficácia da análise, as vicissitudes da transferência e da pulsão no processo analítico, a re-análise e o dispositivo do passe. Para tanto, parte, inicialmente, das questões levantadas pelo texto freudiano “Análise terminável e interminável” e as discute à luz dos desenvolvimentos teóricos realizados por analistas lacanianos. Após apresentar diferentes concepções sobre o final de análise, o artigo defende que há, nesse processo, um ponto de irredutibilidade, a partir do qual se é convocado a uma produção singular.
Automatic initial and final segmentation in cleft palate speech of Mandarin speakers.

Directory of Open Access Journals (Sweden)

Ling He

Full Text Available The speech unit segmentation is an important pre-processing step in the analysis of cleft palate speech. In Mandarin, one syllable is composed of two parts: initial and final. In cleft palate speech, the resonance disorders occur at the finals and the voiced initials, while the articulation disorders occur at the unvoiced initials. Thus, the initials and finals are the minimum speech units, which could reflect the characteristics of cleft palate speech disorders. In this work, an automatic initial/final segmentation method is proposed. It is an important preprocessing step in cleft palate speech signal processing. The tested cleft palate speech utterances are collected from the Cleft Palate Speech Treatment Center in the Hospital of Stomatology, Sichuan University, which has the largest cleft palate patients in China. The cleft palate speech data includes 824 speech segments, and the control samples contain 228 speech segments. The syllables are extracted from the speech utterances firstly. The proposed syllable extraction method avoids the training stage, and achieves a good performance for both voiced and unvoiced speech. Then, the syllables are classified into with "quasi-unvoiced" or with "quasi-voiced" initials. Respective initial/final segmentation methods are proposed to these two types of syllables. Moreover, a two-step segmentation method is proposed. The rough locations of syllable and initial/final boundaries are refined in the second segmentation step, in order to improve the robustness of segmentation accuracy. The experiments show that the initial/final segmentation accuracies for syllables with quasi-unvoiced initials are higher than quasi-voiced initials. For the cleft palate speech, the mean time error is 4.4ms for syllables with quasi-unvoiced initials, and 25.7ms for syllables with quasi-voiced initials, and the correct segmentation accuracy P30 for all the syllables is 91.69%. For the control samples, P30 for all the
Final focus system for TLC

International Nuclear Information System (INIS)

Oide, K.

1988-11-01

A limit of the chromaticity correction for the final focus system of a TeV Linear Collider (TLC) is investigated. As the result, it becomes possible to increase the aperture of the final doublet with a small increase of the horizontal β function. The new optics design uses a final doublet of 0.5 mm half-aperture and 1.4 T pole-tip field. The length of the system is reduced from 400 m to 200 m by several optics changes. Tolerances for various machine errors with this optics are also studied. 5 refs., 7 figs., 2 tabs
Cassini's Grand Finale Overview

Science.gov (United States)

Spilker, L. J.

2017-12-01

After 13 years in orbit, the Cassini-Huygens Mission to Saturn ended in a science-rich blaze of glory. Cassini sent back its final bits of unique science data on September 15, 2017, as it plunged into Saturn's atmosphere, vaporizing and satisfying planetary protection requirements. Cassini's final phase covered roughly ten months and ended with the first time exploration of the region between the rings and planet. In late 2016 Cassini transitioned to a series of 20 Ring Grazing orbits with peripases just outside Saturn's F ring, providing close flybys of tiny ring moons, including Pan, Daphnis and Atlas, and high-resolution views of Saturn's A and F rings. A final Titan flyby in late April 2017 propelled Cassini across Saturn's main rings and into its Grand Finale orbits. Comprised of 22 orbits, Cassini repeatedly dove between Saturn's innermost rings and upper atmosphere to answer fundamental questions unattainable earlier in the mission. The last orbit turned the spacecraft into the first Saturn atmosphere probe. The Grand Finale orbits provided highest resolution observations of both the rings and Saturn, and in-situ sampling of the ring particle composition, Saturn's atmosphere, plasma, and innermost radiation belts. The gravitational field was measured to unprecedented accuracy, providing information on the interior structure of the planet, winds in the deeper atmosphere, and mass of the rings. The magnetic field provided insight into the physical nature of the magnetic dynamo and structure of the internal magnetic field. The ion and neutral mass spectrometer sampled the upper atmosphere for molecules that escape the atmosphere in addition to molecules originating from the rings. The cosmic dust analyzer directly sampled the composition from different parts of the main rings for the first time. Fields and particles instruments directly measured the plasma environment between the rings and planet. Science highlights and new mysteries collected in the Grand
Full aperture backscatter diagnostic for the NIF laser facility (abstract)

International Nuclear Information System (INIS)

Sewall, Noel; Lewis, Izzy; Kirkwood, Robert; Moody, John; Celeste, John

2001-01-01

The current schemes for achieving ignition on the National Ignition Facility require efficient coupling of energy from 192 laser beams to the deuterium--tritium fuel capsule. Each laser beam must propagate through a long scalelength plasma region before being converted to x rays (indirect drive) or being absorbed on the capsule (direct drive). Laser-plasma instabilities such as stimulated Brillouin and stimulated Raman scattering (SBS and SRS) will scatter a fraction of the incident laser energy out of the target leading to an overall reduction in the coupling efficiency. It is important to measure the character of this scattered light in order to understand it and to develop methods for reducing it to acceptable levels. We are designing a system called the full aperature backscatter diagnostic with the capability to measure the time-dependent amplitude and spectral content of the light which is backscattered through the incident beam focusing optic. The backscattered light will be collected over about 85% of the full beam aperture and separated into the SBS wavelength band (348--354 nm) and the SRS wavelength band (400--700 nm). Spectrometers coupled to streak cameras will provide time-resolved spectra for both scattered light components. The scattered light amplitude will be measured with fast and slow diodes. The entire system will be routinely calibrated. Analysis of the data will provide important information for reducing scattered power, achieving power balance, and finally achieving ignition

The Context of Israeli-Palestinian “Final Negotiations”

Directory of Open Access Journals (Sweden)

Dan Tschirgi

2011-05-01

Full Text Available Este artículo constituye un intento preliminar de retomar la atención sobre el asunto político central de larga duración en Oriente Medio -el conflicto palestino-israelí y el rápido límite de plazo del Presidente Obama para terminar las "negociaciones finales" sobre una solución política- y, por otra parte, un esfuerzo por determinar la relevancia de la agitación regional para la perspectiva de una paz entre israelíes y palestinos. El artículo argumenta que los factores contextuales han sido históricamente determinantes del curso del conflicto y sugiere que continuarán desempeñando el mismo rol. Concluye, primero, al sugerir que la propuesta de Barak Obama de un año de "conversaciones finales" ha sido probablemente diseñada sólo para fines políticos que sin embargo aumentarán probablemente las probabilidades de una eventual solución basada en dos Estados, pero además especula con una "revolución joven" en Israel similar a la manifestada en Gaza que pueda llevar a un acuerdo pacífico en las mismas líneas.
Providing Fast Discovery in D2D Communication with Full Duplex Technology

DEFF Research Database (Denmark)

Gatnau, Marta; Berardinelli, Gilberto; Mahmood, Nurul Huda

2016-01-01

technology to provide D2D fast discovery. Such framework provides an algorithm to estimate the number of neighbor devices and to dynamically decide the transmission probability, for adapting to network changes and meeting the 10 milliseconds target. Finally, a signaling scheme is proposed to reduce......In Direct Device-to-Device (D2D), the device awareness procedure known as the discovery phase is required prior to the exchange of data. This work considers autonomous devices where the infrastructure is not involved in the discovery procedure. Commonly, the transmission of the discovery message...... the network interference. Results show that our framework performs better than a static approach, reducing the time it takes to complete the discovery phase. In addition, supporting full duplex allows to further reduce the discovery time compared to half duplex transmission mode....
PWR [pressurized water reactor] pressurizer transient response: Final report

International Nuclear Information System (INIS)

Murphy, S.I.

1987-08-01

To predict PWR pressurizer transients, Ahl proposed a three region model with a universal coefficient to represent condensation on the water surface. Specifically, this work checks the need for three regions and the modeling of the interfacial condensation coefficient. A computer model has been formulated using the basic mass and energy conservation laws. A two region vapor and liquid model was first used to predict transients run on a one-eleventh scale Freon pressurizer. These predictions verified the need for a second liquid region. As a result, a three region model was developed and used to predict full-scale pressurizer transients at TMI-2, Shippingport, and Stade. Full-scale pressurizer predictions verified the three region model and pointed out the shortcomings of Ahl's universal condensation coefficient. In addition, experiments were run using water at low pressure to study interface condensation. These experiments showed interface condensation to be significant only when spray flow is turned on; this result was incorporated in the final three region model
Simulation of a turbine trip transient at Embalse NPP with full-circuit CATHENA model

Energy Technology Data Exchange (ETDEWEB)

Rabiti, A., E-mail: arabiti@na-sa.com.ar [Nucleoelectrica Argentina S.A., Embalse Nuclear Power Plant, Engineering Management Branch, Embalse (Argentina); Parrondo, A., E-mail: aparrondo@na-sa.com.ar [Nucleoelectrica Argentina S.A., Engineering Management, Buenos Aires (Argentina); Serrano, P., E-mail: pserrano@na-sa.com.ar [Nucleoelectrica Argentina S.A., Licensing Coordination Branch, Atucha II Project Branch (Unidad de Gestion), Buenos Aires (Argentina); Sablayrolles, A.; Damiani, H., E-mail: asablayrolles@na-sa.com.ar, E-mail: hdamiani@na-sa.com.ar [Nucleoelectrica Argentina S.A., Embalse Nuclear Power Plant, Embalse Life Extension Project Management, Embalse (Argentina)

2015-07-01

Embalse NPP is carrying on a Periodic Safety Review to deal with its life extension. This review includes tasks like Deterministic Analysis review for the Final Safety Analysis Report. In 2011, NA-SA (Nucleoelectrica Argentina S.A.) issued a first CATHENA full-circuit model representing the current plant. This model is used in this work. The simulation presented here corresponds to a turbine trip that occurred at Embalse NPP. Consistency between the simulation and the real event is demonstrated. Furthermore, NASA is currently performing Safety Analysis with a new model developed jointly with AECL and Candu Energy which includes post refurbishment changes and other improvements. (author)
77 FR 14416 - Notice of Availability of a Final Environmental Impact Statement and Final Environmental Impact...

Science.gov (United States)

2012-03-09

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) has prepared a Proposed California Desert Conservation Area (CDCA) Plan Amendment (PA)/Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) for the Ocotillo Express Wind Energy Facility (OWEF) and by this notice is announcing the availability of the Proposed PA and Final EIS/EIR.
Low-complexity full-rate transmission scheme with full diversity for two-path relay networks

KAUST Repository

Fareed, Muhammad Mehboob; Yang, Hongchuan; Alouini, Mohamed-Slim

2015-01-01

Existing full-rate transmission schemes for two-path relay networks typically cannot achieve full diversity while demanding high decoding complexity. In this paper, we present a novel low-complexity full-rate transmission scheme for two-path relay networks to harvest maximum achievable diversity. The proposed scheme adopts block transmission with small block size of four symbols, which greatly reduces the decoding complexity at the receiver. Through the performance analysis of the resulting two-path relay network in terms of the symbol error rate (SER) and diversity order, we show the proposed scheme can achieve full diversity order of four and mimic a 2 \\times 2 multiple-input multiple-output system. Simulations results are provided to validate the mathematical formulation. © 1967-2012 IEEE.
Low-complexity full-rate transmission scheme with full diversity for two-path relay networks

KAUST Repository

Fareed, Muhammad Mehboob

2015-04-01

Existing full-rate transmission schemes for two-path relay networks typically cannot achieve full diversity while demanding high decoding complexity. In this paper, we present a novel low-complexity full-rate transmission scheme for two-path relay networks to harvest maximum achievable diversity. The proposed scheme adopts block transmission with small block size of four symbols, which greatly reduces the decoding complexity at the receiver. Through the performance analysis of the resulting two-path relay network in terms of the symbol error rate (SER) and diversity order, we show the proposed scheme can achieve full diversity order of four and mimic a 2 \\\\times 2 multiple-input multiple-output system. Simulations results are provided to validate the mathematical formulation. © 1967-2012 IEEE.
Full-Wave Analysis of Microstrip Antennas in Three-Layered Spherical Media

Directory of Open Access Journals (Sweden)

Tao Yu

2013-01-01

Full Text Available A model of three-layered spherical microstrip antenna has been analyzed based on Rao-Wilton-Glisson (RWG triangular basis functions using mixed potential integral equation (MPIE. Firstly, the model of antenna and the dyadic Green’s function in spherical microstrip antennas are given at the beginning of this paper. Then, due to the infinite series convergence problem, asymptotic extraction approach is presented to accelerate the Green’s functions convergence speed when source and field points are located in the same layer and different layers. The convergence speed can be accelerated observably by using this method. Finally, in order to simplify impedance matrix elements calculation at the junction of the probe and patch, a novel division fashion of pair of triangles is adopted in this paper. The input impedance result obtained shows the validity and effectiveness of the analysis method comparing with published data.
"Walking the Walk" The Final Step to Full Implementation of Goldwater-Nichols

National Research Council Canada - National Science Library

LaBrutta, Robert

2002-01-01

... (GNA) of 1986. Although vast improvements in unifying the Services have been achieved, many believe that, Parochialism, not cooperation, remains the watchword despite the common deference to jointness...
Listening to Student Views on the Transition from Work Placement to the Final Year

Science.gov (United States)

Anderson, Pamela; Novakovic, Yvonne

2017-01-01

This paper addresses a gap in the literature on student work placements, specifically the challenges of returning to final-year study after a year out. We focus on students in an Accountancy and Finance Department at one UK University who alerted us to the ways in which they struggled during the transition back to full-time study. Their accounts…
Liberation as a Paradigm for Full Humanity in Africa

Directory of Open Access Journals (Sweden)

Tshuma Ephraim

2016-06-01

Full Text Available The study is a response to the call for papers that focuses on African issues and discusses the issue of liberation. This paper seeks to explore the theme of liberation beginning with its definition. It will then proceed by looking at the history of Israel discussing the Egyptian bondage. The identity and role of Moses will also be explored in light of the prominent role that the Hebrew Bible gives him in the exodus motifs. It also highlights the life and role of Jesus of Nazareth in human liberation. In addition it will also highlight the importance of liberation and will pay attention to the fight for freedom and independence in Africa. Finally it looks at the quest for liberation among marginalized women and children in Africa looking at their struggles in the 21st century. The essay will use examples from both theological and secular sources. The Biblical/theological examples will be drawn from the Hebrew Bible, the New Testament and commentaries. Since Africa is very big although sharing related issues, I will use specific examples from Zimbabwe and also use general information from across the continent.
78 FR 32269 - Notice of Availability of the Final Environmental Impact Statement/Environmental Impact Report...

Science.gov (United States)

2013-05-29

..., state and local levels. While CDFW has participated in the development of this joint EIS/ EIR, the... alternatives on the human and physical environment, including, but not limited to, effects on biological... inspection at several libraries and government offices. A full list of locations where the final EIS/EIR is...
The final checkpoint. Cancer as an adaptive evolutionary mechanism

Directory of Open Access Journals (Sweden)

Rumena Petkova

2016-05-01

Full Text Available The mechanisms for identification of DNA damage and repair usually manage DNA damage very efficiently. If damaged cells manage to bypass the checkpoints where the integrity of the genome is assessed and the decisions whether to proceed with the cell cycle are made, they may evade the imperative to stop dividing and to die. As a result, cancer may develop. Warding off the potential sequence-altering effects of DNA damage during the life of the individual or the existence span of the species is controlled by a set of larger checkpoints acting on a progressively increasing scale, from systematic removal of damaged cells from the proliferative pool by means of repair of DNA damage/programmed cell death through ageing to, finally, cancer. They serve different purposes and act at different levels of the life cycle, safeguarding the integrity of the genetic backup of the individual, the genetic diversity of the population, and, finally, the survival of the species and of life on Earth. In the light of the theory that cancer is the final checkpoint or the nature's manner to prevent complex organisms from living forever at the expense of genetic stagnation, the eventual failure of modern anti-cancer treatments is only to be expected. Nevertheless, the medicine of today and the near future has enough potential to slow down the progression to terminal cancer so that the life expectancy and the quality of life of cancer-affected individuals may be comparable to those of healthy aged individuals.
RGO-coated elastic fibres as wearable strain sensors for full-scale detection of human motions

Science.gov (United States)

Mi, Qing; Wang, Qi; Zang, Siyao; Mao, Guoming; Zhang, Jinnan; Ren, Xiaomin

2018-01-01

In this study, we chose highly-elastic fabric fibres as the functional carrier and then simply coated the fibres with reduced graphene oxide (rGO) using plasma treatment, dip coating and hydrothermal reduction steps, finally making a wearable strain sensor. As a result, the full-scale detection of human motions, ranging from bending joints to the pulse beat, has been achieved by these sensors. Moreover, high sensitivity, good stability and excellent repeatability were realized. The good sensing performances and economical fabrication process of this wearable strain sensor have strengthened our confidence in practical applications in smart clothing, smart fabrics, healthcare, and entertainment fields.
DEMONSTRATION OF A FULL-SCALE RETROFIT OF THE ADVANCED HYBRID PARTICULATE COLLECTOR TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

Tom Hrdlicka; William Swanson

2005-12-01

The Advanced Hybrid Particulate Collector (AHPC), developed in cooperation between W.L. Gore & Associates and the Energy & Environmental Research Center (EERC), is an innovative approach to removing particulates from power plant flue gas. The AHPC combines the elements of a traditional baghouse and electrostatic precipitator (ESP) into one device to achieve increased particulate collection efficiency. As part of the Power Plant Improvement Initiative (PPII), this project was demonstrated under joint sponsorship from the U.S. Department of Energy and Otter Tail Power Company. The EERC is the patent holder for the technology, and W.L. Gore & Associates was the exclusive licensee for this project. The project objective was to demonstrate the improved particulate collection efficiency obtained by a full-scale retrofit of the AHPC to an existing electrostatic precipitator. The full-scale retrofit was installed on an electric power plant burning Powder River Basin (PRB) coal, Otter Tail Power Company's Big Stone Plant, in Big Stone City, South Dakota. The $13.4 million project was installed in October 2002. Project related testing concluded in December 2005. The following Final Technical Report has been prepared for the project entitled ''Demonstration of a Full-Scale Retrofit of the Advanced Hybrid Particulate Collector Technology'' as described in DOE Award No. DE-FC26-02NT41420. The report presents the operation and performance results of the system.
A Incidência Final dos Impostos Indiretos no Brasil: Efeitos da Tributação de Insumos

Directory of Open Access Journals (Sweden)

Siqueira Rozane Bezerra de

2001-01-01

Full Text Available Devido à multiplicidade de impostos e alíquotas e à incidência sobre insumos, o efeito final do sistema brasileiro de impostos indiretos sobre os preços está longe de ser transparente. Usando um método que incorpora os efeitos multissetoriais dos impostos indiretos, este artigo calcula, para o Brasil, a incidência efetiva destes impostos sobre os diferentes componentes da demanda final. Os resultados mostram que atividades para as quais existe uma política explícita de desoneração de impostos são de fato significativamente tributadas, indicando que a incidência final pode ser bem diversa daquela defendida pelos formuladores de políticas tributárias ou desejada pela sociedade.
Tax shift : eliminating subsidies and moving to full cost electricity pricing

International Nuclear Information System (INIS)

Gibbons, J.

2008-01-01

In order to ensure that Ontario's service needs are met at the lowest possible total cost, energy conservation and small-scale distributed generation options must be able to compete with large scale-centralized generation and transmission options on a level playing field. This report discussed how electricity is priced in Ontario. The report described the policies that subsidize coal and nuclear generation and promote excessive consumption of grid-supplied electricity. The report also presented an analysis of the impact of these subsidies and policies on Ontario's electricity consumption, electricity productivity, standard of living and air pollutant emissions. It described a practical strategy whereby these subsidies can be eliminated by recycling or shifting the monies currently spent on subsidies in a way that creates an incentive to reduce electricity consumption. It also described how full cost pricing could lead to a net financial benefit for residential customers as well as an adaptation strategy for businesses that would ensure that they remain competitive. Finally the report identified ten major subsidies that artificially reduce the cost of electricity in Ontario. These included below-market water royalty rates; corporate income tax revenue subsidy for nuclear debt; sales tax exemption; average cost pricing; and bulk metering. It was concluded that phasing out the subsidies for grid-supplied electricity and moving to full cost pricing will provide multiple benefits for Ontario. 36 refs., 5 tabs., 5 figs
Cinema as Relief and Final Goal

Directory of Open Access Journals (Sweden)

Ricardo ALDARONDO

2017-09-01

Full Text Available In the history of cinema many films, from fiction to documentaries, have reflected how death and disease affect human beings. A few of them, however, have established a total and truthful relationship, almost symbiotic, between a terminal patient and the recorded image. Lightning Over Water (1979 by Nicholas Ray and Wim Wenders, and Las alas de la vida (2006, by Antonio Pérez Canet have explored the role of the camera not only as an element of communication for the patient to transmit his or her sensations in the final stretch of life, but also as a kind of palliative care for the patient. But the presence of the camera, the filming of the dying moments to convert them into a film can also lead to some intimate reflections and moral dilemmas around the terrain that falls somewhere between the documentary as a source of knowledge and the spectacle that cinema always entails, although in a slight and tangential way.
[Endoscopic full-thickness resection].

Science.gov (United States)

Meier, B; Schmidt, A; Caca, K

2016-08-01

Conventional endoscopic resection techniques such as endoscopic mucosal resection (EMR) or endoscopic submucosal dissection (ESD) are powerful tools for the treatment of gastrointestinal (GI) neoplasms. However, those techniques are limited to the superficial layers of the GI wall (mucosa and submucosa). Lesions without lifting sign (usually arising from deeper layers) or lesions in difficult anatomic positions (appendix, diverticulum) are difficult - if not impossible - to resect using conventional techniques, due to the increased risk of complications. For larger lesions (>2 cm), ESD appears to be superior to the conventional techniques because of the en bloc resection, but the procedure is technically challenging, time consuming, and associated with complications even in experienced hands. Since the development of the over-the-scope clips (OTSC), complications like bleeding or perforation can be endoscopically better managed. In recent years, different endoscopic full-thickness resection techniques came to the focus of interventional endoscopy. Since September 2014, the full-thickness resection device (FTRD) has the CE marking in Europe for full-thickness resection in the lower GI tract. Technically the device is based on the OTSC system and combines OTSC application and snare polypectomy in one step. This study shows all full-thickness resection techniques currently available, but clearly focuses on the experience with the FTRD in the lower GI tract.
The Final Beneficiaries are Actors Active Little and Influential in Decisions on Public Policy in Brazil

Directory of Open Access Journals (Sweden)

Diolina Rodrigues Santiago Silva

2016-10-01

Full Text Available Public policies are government programs that directly influence the citizens' lives. In the formulation and implementation of these policies, there is the presence of political and private actors. The final beneficiaries are between different types of private actors. Some laws require the government listen to society at the time of decision-making in public policy and in national conferences and public consultations. The final beneficiaries, actual users of these public policies have to reach some mechanisms of direct participation in the formulation of these policies, but the number of participants is smaller and doesn't influence in making government decisions.

Perceived stress at transition to workplace: a qualitative interview study exploring final-year medical students’ needs

Directory of Open Access Journals (Sweden)

Moczko TR

2016-01-01

Full Text Available Tobias R Moczko,1,2,* Till J Bugaj,1,* Wolfgang Herzog,1 Christoph Nikendei1 1Department for General Internal and Psychosomatic Medicine, University Hospital of Heidelberg, Heidelberg, 2School of Medicine, Faculty of Health, Witten/Herdecke University, Witten, Germany *These authors contributed equally to this work Objectives: This study was designed to explore final-year medical students’ stressors and coping strategies at the transition to the clinical workplace. Methods: In this qualitative study, semi-standardized interviews with eight final-year medical students (five male, three female; aged 25.9±1.4 years were conducted during their internal medicine rotation. After verbatim transcription, a qualitative content analysis of students’ impressions of stress provoking and easing factors during final-year education was performed. Results: Students’ statements regarding burdens and dealing with stress were classified into four main categories: A perceived stressors and provoking factors, B stress-induced consequences, C personal and external resources for preventing and dealing with stress, and D final-year students’ suggestions for workplace improvement. Conclusion: Final-year medical students perceived different types of stress during their transition to medical wards, and reported both negative consequences and coping resources concerning perceived stress. As supervision, feedback, and coping strategies played an important role in the students’ perception of stress, final-year medical education curricula development should focus on these specifically. Keywords: undergraduate medical education, stress prevention, final-year medical education, workplace learning, qualitative research
Inverting reflections using full-waveform inversion with inaccurate starting models

KAUST Repository

AlTheyab, Abdullah

2015-08-19

We present a method for inverting seismic reflections using full-waveform inversion (FWI) with inaccurate starting models. For a layered medium, near-offset reflections (with zero angle of incidence) are unlikely to be cycle-skipped regardless of the low-wavenumber velocity error in the initial models. Therefore, we use them as a starting point for FWI, and the subsurface velocity model is then updated during the FWI iterations using reflection wavepaths from varying offsets that are not cycle-skipped. To enhance low-wavenumber updates and accelerate the convergence, we take several passes through the non-linear Gauss-Seidel iterations, where we invert traces from a narrow range of near offsets and finally end at the far offsets. Every pass is followed by applying smoothing to the cumulative slowness update. The smoothing is strong at the early stages and relaxed at later iterations to allow for a gradual reconstruction of the subsurface model in a multiscale manner. Applications to synthetic and field data, starting from inaccurate models, show significant low-wavenumber updates and flattening of common-image gathers after many iterations.
Wavefront picking for 3D tomography and full-waveform inversion

KAUST Repository

AlTheyab, Abdullah

2016-09-08

We have developed an efficient approach for picking firstbreak wavefronts on coarsely sampled time slices of 3D shot gathers. Our objective was to compute a smooth initial velocity model for multiscale full-waveform inversion (FWI). Using interactive software, first-break wavefronts were geometrically modeled on time slices with a minimal number of picks. We picked sparse time slices, performed traveltime tomography, and then compared the predicted traveltimes with the data in-between the picked slices. The picking interval was refined with iterations until the errors in traveltime predictions fell within the limits necessary to avoid cycle skipping in early arrivals FWI. This approach was applied to a 3D ocean-bottom-station data set. Our results indicate that wavefront picking has 28% fewer data slices to pick compared with picking traveltimes in shot gathers. In addition, by using sparse time samples for picking, data storage is reduced by 88%, and therefore allows for a faster visualization and quality control of the picks. Our final traveltime tomogram is sufficient as a starting model for early arrival FWI. © 2016 Society of Exploration Geophysicists.
Communicating the Benefits of a Full Sequence of High School Science Courses

Science.gov (United States)

Nicholas, Catherine Marie

High school students are generally uninformed about the benefits of enrolling in a full sequence of science courses, therefore only about a third of our nation's high school graduates have completed the science sequence of Biology, Chemistry and Physics. The lack of students completing a full sequence of science courses contributes to the deficit in the STEM degree production rate needed to fill the demand of the current job market and remain competitive as a nation. The purpose of the study was to make a difference in the number of students who have access to information about the benefits of completing a full sequence of science courses. This dissertation study employed qualitative research methodology to gain a broad perspective of staff through a questionnaire and document review and then a deeper understanding through semi-structured interview protocol. The data revealed that a universal sequence of science courses in the high school district did not exist. It also showed that not all students had access to all science courses; students were sorted and tracked according to prerequisites that did not necessarily match the skill set needed for the courses. In addition, the study showed a desire for more support and direction from the district office. It was also apparent that there was a disconnect that existed between who staff members believed should enroll in a full sequence of science courses and who actually enrolled. Finally, communication about science was shown to occur mainly through counseling and peers. A common science sequence, detracking of science courses, increased communication about the postsecondary and academic benefits of a science education, increased district direction and realistic mathematics alignment were all discussed as solutions to the problem.
Final Focus Systems in Linear Colliders

International Nuclear Information System (INIS)

Raubenheimer, Tor

1998-01-01

In colliding beam facilities, the ''final focus system'' must demagnify the beams to attain the very small spot sizes required at the interaction points. The first final focus system with local chromatic correction was developed for the Stanford Linear Collider where very large demagnifications were desired. This same conceptual design has been adopted by all the future linear collider designs as well as the SuperConducting Supercollider, the Stanford and KEK B-Factories, and the proposed Muon Collider. In this paper, the over-all layout, physics constraints, and optimization techniques relevant to the design of final focus systems for high-energy electron-positron linear colliders are reviewed. Finally, advanced concepts to avoid some of the limitations of these systems are discussed
Analytical approach to chromatic correction in the final focus system of circular colliders

Directory of Open Access Journals (Sweden)

Yunhai Cai

2016-11-01

Full Text Available A conventional final focus system in particle accelerators is systematically analyzed. We find simple relations between the parameters of two focus modules in the final telescope. Using the relations, we derive the chromatic Courant-Snyder parameters for the telescope. The parameters are scaled approximately according to (L^{*}/β_{y}^{*}δ, where L^{*} is the distance from the interaction point to the first quadrupole, β_{y}^{*} the vertical beta function at the interaction point, and δ the relative momentum deviation. Most importantly, we show how to compensate its chromaticity order by order in δ by a traditional correction module flanked by an asymmetric pair of harmonic multipoles. The method enables a circular Higgs collider with 2% momentum aperture and illuminates a path forward to 4% in the future.
Individual differences in the interoceptive states of hunger, fullness and thirst.

Science.gov (United States)

Stevenson, Richard J; Mahmut, Mehmet; Rooney, Kieron

2015-12-01

Interoception is the ability to perceive internal bodily states. This involves the detection and awareness of static and changing afferent signals from the viscera, motivational states, affective reactions, and associated cognitions. We examined whether there are individual differences in any or all of these aspects of ingestion-related interoception and their possible causes. Individual variation in almost all aspects of interoception was documented for hunger, fullness and thirst - including how participants use, prioritise and integrate visceral, motivational, affective and cognitive information. Individual differences may arise from multiple causes, including genetic influences, developmental changes hypothesised to result from child feeding practices, and from conditions such as depression, anxiety, eating disorders and certain subtypes of obesity. A nutritionally poor diet, and dietary restraint, may also affect ingestion-related interoception. Finally, certain forms of brain injury, notably to the medial temporal lobes are associated with impaired ingestion-related interoception. We conclude by examining the practical and theoretical consequences of these individual differences. Copyright © 2015 Elsevier Ltd. All rights reserved.
Expanded studies of linear collider final focus systems at the Final Focus Test Beam

International Nuclear Information System (INIS)

Tenenbaum, P.G.

1995-12-01

In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 3,50 to 1,500 GeV will need to deliver beams which are as small as a few Manometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnification equivalent to those in the future linear collider, which corresponds to a focused spot size in the FFTB of 1.7 microns (horizontal) by 60 manometers (vertical). In order to achieve the desired spot sizes, the FFTB beam optics must be tuned to eliminate aberrations and other errors, and to ensure that the optics conform to the desired final conditions and the measured initial conditions of the beam. Using a combination of incoming-beam diagnostics. beam-based local diagnostics, and global tuning algorithms, the FFTB beam size has been reduced to a stable final size of 1.7 microns by 70 manometers. In addition, the chromatic properties of the FFTB have been studied using two techniques and found to be acceptable. Descriptions of the hardware and techniques used in these studies are presented, along with results and suggestions for future research
Expanded studies of linear collider final focus systems at the Final Focus Test Beam

Energy Technology Data Exchange (ETDEWEB)

Tenenbaum, Peter Gregory [Stanford Univ., CA (United States)

1995-12-01

In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 3,50 to 1,500 GeV will need to deliver beams which are as small as a few Manometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnification equivalent to those in the future linear collider, which corresponds to a focused spot size in the FFTB of 1.7 microns (horizontal) by 60 manometers (vertical). In order to achieve the desired spot sizes, the FFTB beam optics must be tuned to eliminate aberrations and other errors, and to ensure that the optics conform to the desired final conditions and the measured initial conditions of the beam. Using a combination of incoming-beam diagnostics. beam-based local diagnostics, and global tuning algorithms, the FFTB beam size has been reduced to a stable final size of 1.7 microns by 70 manometers. In addition, the chromatic properties of the FFTB have been studied using two techniques and found to be acceptable. Descriptions of the hardware and techniques used in these studies are presented, along with results and suggestions for future research.
Final focus nomenclature

International Nuclear Information System (INIS)

Erickson, R.

1986-01-01

The formal names and common names for all devices in the final focus system of the SLC are listed. The formal names consist of a device type designator, microprocessor designator, and a four-digit unit number
FameLab - Swiss Semi Finals

CERN Multimedia

Corinne Pralavorio

2012-01-01

Twenty-two young scientists participated in the FameLab semi-final at CERN's Globe of Science and Innovation on 4 February, supported by a large audience and by more than 100 fans following via webcast. A panel of judges chose Lemmer and four other candidates to join five other semi-finalists at the national finals in Zurich on 30 March.
Gerenciamento de resíduos laboratoriais: recuperação de elementos e preparo para descarte final

Directory of Open Access Journals (Sweden)

Afonso Júlio Carlos

2003-01-01

Full Text Available This work shows some laboratory waste management developed in order to recover some elements or to prepare the waste for a correct final disposal. The 25 elements chosen cover basically all chemical behaviors found for the metals in the Periodic Table. The treatments adopted were based on the classical behavior in aqueous solution (wet chemistry but an important condition for a full success was the previous knowledge of the qualitative composition of the wastes treated. Some general trends were found: the final liquid waste was always saline and normally presented a higher volume than the original waste; most original wastes were acid in nature; steps such as solid-liquid separation, washing, evaporating and calcining were currently performed. This work was also a very good experience in chemistry in solution for students and showed them the need of treating wastes for a better environment.
An Online Full-Body Motion Recognition Method Using Sparse and Deficient Signal Sequences

Directory of Open Access Journals (Sweden)

Chengyu Guo

2014-01-01

Full Text Available This paper presents a method to recognize continuous full-body human motion online by using sparse, low-cost sensors. The only input signals needed are linear accelerations without any rotation information, which are provided by four Wiimote sensors attached to the four human limbs. Based on the fused hidden Markov model (FHMM and autoregressive process, a predictive fusion model (PFM is put forward, which considers the different influences of the upper and lower limbs, establishes HMM for each part, and fuses them using a probabilistic fusion model. Then an autoregressive process is introduced in HMM to predict the gesture, which enables the model to deal with incomplete signal data. In order to reduce the number of alternatives in the online recognition process, a graph model is built that rejects parts of motion types based on the graph structure and previous recognition results. Finally, an online signal segmentation method based on semantics information and PFM is presented to finish the efficient recognition task. The results indicate that the method is robust with a high recognition rate of sparse and deficient signals and can be used in various interactive applications.
Full Characterization at Low Temperature of Piezoelectric Actuators Used for SRF Cavities Active Tuning

CERN Document Server

Fouaidy, Mohammed; Chatelet, Frederic; Hammoudi, Nourredine; Martinet, Guillaume; Olivier, Aurelia; Saugnac, Herve

2005-01-01

In the frame of the CARE project activities, supported by EU, IPN Orsay participate to the development of a fast cold tuning system for SRF cavities operating at a temperature T=2 K. The study is aimed at full characterization of piezoelectric actuators at low temperature. A new experimental facility was developed for testing various prototypes piezoelectric actuators and successfully operated for T in the range 1.8 K-300 K. Different parameters were investigated as function of T: piezoelectric actuator displacement vs. applied voltage V, capacitance vs. T, dielectric and thermal properties vs. T and finally heating DT due to dielectric losses vs. modulating voltage Vmod and frequency. We observed a decrease of the Full Range Displacement (FRD or DX) of the actuator from ~40μm @ 300K down to 1.8μm-3μm @ 1.8K, depending on both material and fabrication process of the piezostacks. Besides, both material and fabrication process have a strong influence on the shape of the characteris...
Near-Space TOPSAR Large-Scene Full-Aperture Imaging Scheme Based on Two-Step Processing

Directory of Open Access Journals (Sweden)

Qianghui Zhang

2016-07-01

Full Text Available Free of the constraints of orbit mechanisms, weather conditions and minimum antenna area, synthetic aperture radar (SAR equipped on near-space platform is more suitable for sustained large-scene imaging compared with the spaceborne and airborne counterparts. Terrain observation by progressive scans (TOPS, which is a novel wide-swath imaging mode and allows the beam of SAR to scan along the azimuth, can reduce the time of echo acquisition for large scene. Thus, near-space TOPS-mode SAR (NS-TOPSAR provides a new opportunity for sustained large-scene imaging. An efficient full-aperture imaging scheme for NS-TOPSAR is proposed in this paper. In this scheme, firstly, two-step processing (TSP is adopted to eliminate the Doppler aliasing of the echo. Then, the data is focused in two-dimensional frequency domain (FD based on Stolt interpolation. Finally, a modified TSP (MTSP is performed to remove the azimuth aliasing. Simulations are presented to demonstrate the validity of the proposed imaging scheme for near-space large-scene imaging application.
Final states in Si and GaAs via RF μSR spectroscopy

International Nuclear Information System (INIS)

Kreitzman, S.R.; Pfiz, T.; Riseman, T.M.; Brewer, J.H.; Williams, D.L.; Sun-Mack, S.; Estle, T.L.

1991-01-01

The ionization of muonium centers in Si and GaAs have been studied using radio frequency (RF) resonant techniques. In Si all three muonic centers are detectable by RF. No evidence was found for delayed Mu and Mu * states at any temperature. However, our results on the diamagnetic final state (μ f + ) show that it is composed of prompt fractions (as seen by conventional μSR) and delayed fractions arising from the ionization of Mu * and Mu. We observe a full μ f + fraction at 317 K when the Mu relaxation rate is above 10 μs -1 . GaAs differs from the situation in Si in that we observed only a partial conversion of Mu * and Mu to a μ + final state up to 310 K in spite of the fact that the transverse field relaxation rates become very high at 150 and 250 K respectively. (orig.)
Final states in Si and GaAs via RF μSR spectroscopy

Science.gov (United States)

Kreitzman, S. R.; Pfiz, T.; Sun-Mack, S.; Riseman, T. M.; Brewer, J. H.; Williams, D. Ll.; Estle, T. L.

1991-02-01

The ionization of muonium centers in Si and GaAs have been studied using radio frequency (RF) resonant techniques. In Si all three muonic centers are detectable by RF. No evidence was found for delayed Mu and Mu* states at any temperature. However, our results on the diamagnetic final state (μ{f/+}) show that it is composed of prompt fractions (as seen by conventional μSR) and delayed fractions arising from the ionization of Mu* and Mu. We observe a full μ{f/+} fraction at 317 K when the Mu relaxation rate is above 10 μs-1. GaAs differs from the situation in Si in that we observed only a partial conversion of Mu* and Mu to a μ+ final state up to 310 K in spite of the fact that the transverse field relaxation rates become very high at 150 and 250 K respectively.
Final focus nomenclature

Energy Technology Data Exchange (ETDEWEB)

Erickson, R.

1986-08-08

The formal names and common names for all devices in the final focus system of the SLC are listed. The formal names consist of a device type designator, microprocessor designator, and a four-digit unit number. (LEW)
10 CFR 603.890 - Final performance report.

Science.gov (United States)

2010-01-01

... to Other Administrative Matters Financial and Programmatic Reporting § 603.890 Final performance report. A TIA must require a final performance report that addresses all major accomplishments under the... 10 Energy 4 2010-01-01 2010-01-01 false Final performance report. 603.890 Section 603.890 Energy...
Full Employment in a Green Society

OpenAIRE

Steve Dawe

2012-01-01

This article is an attempt to re-conceptualise Full Employment. The UK context is the main geographical focus. A normative route to the rehabilitation of Full Employment is offered - recast here as 'Green Full Employment' - utilising a variety of Green perspectives from sociology, politics and economics. This contribution to the debate about Full Employment is 'normative', because without ethical values we may lack a moral compass to motivate policies. Green Full Employment is presented here ...

Final Comparison Study of Teaching Blended In-Class Courses vs. Teaching Distance Education Courses

Directory of Open Access Journals (Sweden)

Susan J. Martin

2012-12-01

Full Text Available This paper will share with the members of the conference the findings from the final study. This study contains five semesters of analyzed data which compares the retention of students, final grades for students, grades for five specific tasks that were given in blended in-class courses and in the totally online courses, and a comparison of data by GPA, gender, and by class level. All courses were American Politics PLSC 111. Each semester one or two American Politics courses were conducted in the classroom and one American Politics distance education course was conducted totally online. Each time the courses were given, it was during the same semester and by the same professor who is the researcher.
SLC Final Performance and Lessons

International Nuclear Information System (INIS)

Phinney, Nan

2000-01-01

The Stanford Linear Collider (SLC) was the first prototype of a new type of accelerator, the electron-positron linear collider. Many years of dedicated effort were required to understand the physics of this new technology and to develop the techniques for maximizing performance. Key issues were emittance dilution, stability, final beam optimization and background control. Precision, non-invasive diagnostics were required to measure and monitor the beams throughout the machine. Beam-based feedback systems were needed to stabilize energy, trajectory, intensity and the final beam size at the interaction point. variety of new tuning techniques were developed to correct for residual optical or alignment errors. The final focus system underwent a series of refinements in order to deliver sub-micron size beams. It also took many iterations to understand the sources of backgrounds and develop the methods to control them. The benefit from this accumulated experience was seen in the performance of the SLC during its final run in 1997-98. The luminosity increased by a factor of three to 3*10 30 and the 350,000 Z data sample delivered was nearly double that from all previous runs combined
Final-year medical students′ perceptions regarding the curriculum in public health

Directory of Open Access Journals (Sweden)

Mitrakrishnan Rayno Navinan

2011-01-01

Full Text Available Background: The Faculty of Medicine, University of Colombo, has an integrated curriculum in which teaching of public health takes place through a series of modules which span the full five-year study programme. Aim: To assess final year medical student perceptions regarding the public health curriculum and to identify factors which influence this. Materials and Methods: The study was cross sectional. Convenience sampling was utilized on final-year students of the Faculty of Medicine, University of Colombo, Sri Lanka. A self-administered 4-point Likert scale questionnaire covered general opinion on public healthcare and perceptions about the curriculum. Data were analyzed using descriptive statistics and Chi-square tests. Results: One hundred and eighty four students (94% participated in the study. Eighty-two percent (148 viewed public health as an important field. Only 9% (16 were interested in a career in public health. A significant association was found between choosing public health as career and the following: perception of public health as an important field; holding a good opinion about public health prior to commencement of the course; having found the field-based experience enjoyable and beneficial to the community; and feeling competent to work in the community at the end of the course (P < 0.01. With regard to teaching methods, group activities and discussion-centered activities were identified positively (153, 83% and 125, 68% respectively. The majority of students indicated that they were not stimulated to read more on the subject or regularly revise what they have learnt, both during the introductory public health programme and during the final year. Conclusions: The curriculum has been able to create a positive opinion about public health. However, students lack enthusiasm to learn independently. Experiential, group-centered teaching activities and a constructivist approach may be more effective in promoting independent learning
Full-F gyrofluid model

DEFF Research Database (Denmark)

Madsen, Jens

2013-01-01

variables. The fluid moment hierarchy is closed by approximating the gyrokinetic distribution function as a finite order Hermite-Laguerre polynomial and by determining closure approximations for terms involving the gyrokinetic gyro-averaging operator. The model exactly conserves the gyrokinetic full......A global electromagnetic gyrofluid model based on the full-F gyrokinetic model is derived. The gyrofluid moment variables are not split into fluctuating and equilibrium parts. Profiles are evolved freely, and gyro-averaging operators are not parametrized, but are functions of the gyrofluid moment...
Cassini's Grand Finale Science Highlights

Science.gov (United States)

Spilker, Linda

2017-10-01

After 13 years in orbit, the Cassini-Huygens Mission to Saturn ended in a science-rich blaze of glory. Cassini returned its final bits of unique science data on September 15, 2017, as it plunged into Saturn's atmosphere satisfying planetary protection requirements. Cassini's Grand Finale covered a period of roughly five months and ended with the first time exploration of the region between the rings and planet.The final close flyby of Titan in late April 2017 propelled Cassini across Saturn’s main rings and into its Grand Finale orbits; 22 orbits that repeatedly dove between Saturn’s innermost rings and upper atmosphere making Cassini the first spacecraft to explore this region. The last orbit turned the spacecraft into the first Saturn upper atmospheric probe.The Grand Finale orbits provided highest resolution observations of both the rings and Saturn, and in-situ sampling of the ring particle composition, Saturn's atmosphere, plasma, and innermost radiation belts. The gravitational field was measured to unprecedented accuracy, providing information on the interior structure of the planet, winds in the deeper atmosphere, and mass of the rings. The magnetic field provided insight into the physical nature of the magnetic dynamo and structure of the internal magnetic field. The ion and neutral mass spectrometer sampled the upper atmosphere for molecules that escape the atmosphere in addition to molecules originating from the rings. The cosmic dust analyzer directly sampled the composition from different parts of the main rings for the first time. Fields and particles instruments directly measured the plasma environment between the rings and planet.Science highlights and new mysteries gleaned to date from the Grand Finale orbits will be discussed.The research described in this paper was carried out in part at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration. Copyright 2017
Fractional-order control and simulation of wind energy systems with PMSG/full-power converter topology

International Nuclear Information System (INIS)

Melicio, R.; Mendes, V.M.F.; Catalao, J.P.S.

2010-01-01

This paper presents a new integrated model for the simulation of wind energy systems. The proposed model is more realistic and accurate, considering a variable-speed wind turbine, two-mass rotor, permanent magnet synchronous generator (PMSG), different power converter topologies, and filters. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with PMSG/full-power converter topology, based on fractional-order controllers. Comprehensive simulation studies are carried out with matrix and multilevel power converter topologies, in order to adequately assert the system performance in what regards the quality of the energy injected into the electric grid. Finally, conclusions are duly drawn.
Fractional-order control and simulation of wind energy systems with PMSG/full-power converter topology

Energy Technology Data Exchange (ETDEWEB)

Melicio, R.; Catalao, J.P.S. [Department of Electromechanical Engineering, University of Beira Interior, R. Fonte do Lameiro, 6201-001 Covilha (Portugal); Mendes, V.M.F. [Department of Electrical Engineering and Automation, Instituto Superior de Engenharia de Lisboa, R. Conselheiro Emidio Navarro, 1950-062 Lisbon (Portugal)

2010-06-15

This paper presents a new integrated model for the simulation of wind energy systems. The proposed model is more realistic and accurate, considering a variable-speed wind turbine, two-mass rotor, permanent magnet synchronous generator (PMSG), different power converter topologies, and filters. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with PMSG/full-power converter topology, based on fractional-order controllers. Comprehensive simulation studies are carried out with matrix and multilevel power converter topologies, in order to adequately assert the system performance in what regards the quality of the energy injected into the electric grid. Finally, conclusions are duly drawn. (author)
Claims Procedure for Plans Providing Disability Benefits; 90-Day Delay of Applicability Date. Final rule; delay of applicability

Science.gov (United States)

2017-11-29

This document delays for ninety (90) days--through April 1, 2018--the applicability of a final rule amending the claims procedure requirements applicable to ERISA-covered employee benefit plans that provide disability benefits (Final Rule). The Final Rule was published in the Federal Register on December 19, 2016, became effective on January 18, 2017, and was scheduled to become applicable on January 1, 2018. The delay announced in this document is necessary to enable the Department of Labor to carefully consider comments and data as part of its effort, pursuant to Executive Order 13777, to examine regulatory alternatives that meet its objectives of ensuring the full and fair review of disability benefit claims while not imposing unnecessary costs and adverse consequences.
Compressive full waveform lidar

Science.gov (United States)

Yang, Weiyi; Ke, Jun

2017-05-01

To avoid high bandwidth detector, fast speed A/D converter, and large size memory disk, a compressive full waveform LIDAR system, which uses a temporally modulated laser instead of a pulsed laser, is studied in this paper. Full waveform data from NEON (National Ecological Observatory Network) are used. Random binary patterns are used to modulate the source. To achieve 0.15 m ranging resolution, a 100 MSPS A/D converter is assumed to make measurements. SPIRAL algorithm with canonical basis is employed when Poisson noise is considered in the low illuminated condition.
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Helm, R.; Irwin, J.

1992-08-01

Final focus systems for linear colliders present many exacting challenges in beam optics, component design, and beam quality. Efforts to resolve these problems as they relate to a new generation of linear colliders are under way at several laboratories around the world. We will outline criteria for final focus systems and discuss the current state of understanding and resolution of the outstanding problems. We will discuss tolerances on alignment, field quality and stability for optical elements, and the implications for beam parameters such as emittance, energy spread, bunch length, and stability in position and energy. Beam-based correction procedures, which in principle can alleviate many of the tolerances, will be described. Preliminary results from the Final Focus Test Beam (FFTB) under construction at SLAC will be given. Finally, we mention conclusions from operating experience at the Stanford Linear Collider (SLC)
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Helm, R.; Irwing, J.

1992-01-01

Final focus systems for linear colliders present many exacting challenges in beam optics, component design, and beam quality. Efforts to resolve these problems as they relate to a new generation of linear colliders are under way at several laboratories around the world. We outline criteria for final focus systems and discuss the current state of understanding and resolution of the outstanding problems. We discuss tolerances on alignment, field quality and stability for optical elements, and the implications for beam parameters such as emittance, energy spread , bunch length, and stability in position and energy. Beam-based correction procedures, which in principle can alleviate many of the tolerances, are described. Preliminary results from the Final Focus Test Beam (FFTB) under construction at SLAC are given. Finally, we mention conclusions from operating experience at the Stanford Linear Collider (SLC). (Author) 16 refs., 4 tabs., 6 figs
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Erickson, R.A.

1987-11-01

The final focus system of a linear collider must perform two primary functions, it must focus the two opposing beams so that their transverse dimensions at the interaction point are small enough to yield acceptable luminosity, and it must steer the beams together to maintain collisions. In addition, the final focus system must transport the outgoing beams to a location where they can be recycled or safely dumped. Elementary optical considerations for linear collider final focus systems are discussed, followed by chromatic aberrations. The design of the final focus system of the SLAC Linear Collider (SLC) is described. Tuning and diagnostics and steering to collision are discussed. Most of the examples illustrating the concepts covered are drawn from the SLC, but the principles and conclusions are said to be generally applicable to other linear collider designs as well. 26 refs., 17 figs
Factors associated with basketball field goals made in the 2014 NBA finals

Directory of Open Access Journals (Sweden)

Vitor Ciampolini

2018-01-01

Full Text Available Abstract AIMS The main objective of this study was to analyze the factors that preceded field goals made in the 2014 NBA finals considering the number of passes per offense, shooting conditions, and offense type variables. METHODS We assessed field goals attempted by 27 professional players that participated in the 2014 NBA finals. Data were collected by three researchers through an adapted version of the Technical-Tactical Performance Evaluation Tool in Basketball to systematically analyze all five games of those finals. Descriptive analysis consisted in absolute and relative frequency and inferential statistics were applied through Chi-Square test, Cohen’s D for effect size, and binary logistic regression test. Significance levels were set at 5% and all statistics were applied through SPSS 23.0. RESULTS Shooting efficacy was not associated with the number of passes made per offense. Regression statistics showed that shooting efficacy was highly associated with shooting condition rather than the offense type performed. However, fast breaks seem to lead to better shooting conditions (passively guarded and wide open when compared to set and regained offenses. CONCLUSION Evidence pointed to the importance of shooting condition as a determining factor in increasing the probability of field goals made throughout the games analyzed.
THE PROBLEM OF THE FINALITY OF WORSHIP AND THE STANDARD THOMISTIC ACCOUNT

Directory of Open Access Journals (Sweden)

Francisco J. Romero Carrasquillo

2013-11-01

Full Text Available This paper is an attempt to introduce the issue of the finality of religious worship into the analytical Thomist tradition. It aims to develop a response, based on an analysis of St. Thomas Aquinas’s texts, to the following questions: What is the end of worship? Why do we worship God? What benefit does God derive from our worship? Alternatively, perhaps, is it not ourselves, rather than God, who are the beneficiaries of our own worship? The paper aims to develop what may be called the ‘Standard Thomistic Account’ as a solution to this problem. In the first part (II, the paper examines the problem of the finality of worship within the context of Classical Theism. Part II presents the current state of the problem in the contemporary secondary literature concerning this issue. In the third part (III, the paper focuses on Cajetan’s version of the Standard Thomistic Account, and shows in which aspects it is in need of more nuance to be able to portray Aquinas’ complete solution. Finally, Part IV proposes a careful and faithful reading of the texts and lays out the foundations for a new and more nuanced solution to the problem.
Mine-by experiment final design report

International Nuclear Information System (INIS)

Read, R.S.; Martin, C.D.

1991-12-01

The Underground Research Laboratory (URL) Mine-by Experiment is designed to provide information on rock mass response to excavation that will be used to assess important aspects of the design of a nuclear fuel waste disposal vault in a granitic pluton. The final experiment design is the result of a multidisciplinary approach, drawing on experience gained at other sites as well as the URL, and using both internal expertise and the external consultants. The final experiment design, including details on characterization, construction, instrumentation, and numerical modelling, is presented along with final design drawings
Full Employment in Industrialized Countries.

Science.gov (United States)

Britton, Andrew

1997-01-01

Argues that full employment must be acceptable on both social and economic grounds. Examines profound changes in industrialized economies since the 1970s and the diversity of employment contracts. Suggests that difficult policy decisions surround full employment. (SK)
75 FR 43107 - Revocation of Requirements for Full-Size Baby Cribs and Non-Full-Size Baby Cribs

Science.gov (United States)

2010-07-23

...] Revocation of Requirements for Full-Size Baby Cribs and Non-Full- Size Baby Cribs AGENCY: Consumer Product... standards, and include ASTM F 1169-10, ``Standard Consumer Safety Specification for Full-Size Baby Cribs,'' and ASTM F 406-10, ``Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards...
Final Report

Energy Technology Data Exchange (ETDEWEB)

Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-08-07

This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.
Characterization of the radon source in North-Central Florida. Final report part 1 -- Final project report; Final report part 2 -- Technical report

International Nuclear Information System (INIS)

1997-01-01

This report contains two separate parts: Characterization of the Radon Source in North-Central Florida (final report part 1 -- final project report); and Characterization of the Radon Source in North-Central Florida (technical report). The objectives were to characterize the radon 222 source in a region having a demonstrated elevated indoor radon potential and having geology, lithology, and climate that are different from those in other regions of the U.S. where radon is being studied. Radon availability and transport in this region were described. Approaches for predicting the radon potential of lands in this region were developed
Ecodomy: Life in its fullness � if love rules the oikoumenē

Directory of Open Access Journals (Sweden)

Andries van Aarde

2015-07-01

Full Text Available In the article related terms are deconstructively compared with each other, such as oikodomē (encouragement, dioikēsis theia (divine administration and oikoumenē (inhabited world. The article aims to identify the positive roots of the term oikoumenē beyond the pejorative referencing in the New Testament as �imperial power�. It demonstrates that the notion basileiatou theou (kingdom of God provides a key to discover the gift of love as the heart of ecodomy. The article concludes with a critical discussion of forms of inauthentic love in order to outline what kind of love is conveyed in Jesus� kingdom ethics. The article consists of four sections:(1 �When children rule the oikoumenē�, (2 �When power rules the oikoumenē�, (3 �When love rules the oikoumenē�, and finally (4 �Diff�rance� � when love is not love.

5 CFR 1201.126 - Final decisions.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Final decisions. 1201.126 Section 1201.126 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES PRACTICES AND PROCEDURES Procedures for Original Jurisdiction Cases Special Counsel Disciplinary Actions § 1201.126 Final...
Measurement of the forward-backward asymmetry of top-quark and antiquark pairs using the full CDF Run II data set

Science.gov (United States)

Aaltonen, T.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Bae, T.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bedeschi, F.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brigliadori, L.; Bromberg, C.; Brucken, E.; Budagov, J.; Budd, H. S.; Burkett, K.; Busetto, G.; Bussey, P.; Butti, P.; Buzatu, A.; Calamba, A.; Camarda, S.; Campanelli, M.; Canelli, F.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Cho, K.; Chokheli, D.; Clark, A.; Clarke, C.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Cremonesi, M.; Cruz, D.; Cuevas, J.; Culbertson, R.; d'Ascenzo, N.; Datta, M.; de Barbaro, P.; Demortier, L.; Deninno, M.; D'Errico, M.; Devoto, F.; Di Canto, A.; Di Ruzza, B.; Dittmann, J. R.; Donati, S.; D'Onofrio, M.; Dorigo, M.; Driutti, A.; Ebina, K.; Edgar, R.; Erbacher, R.; Errede, S.; Esham, B.; Farrington, S.; Fernández Ramos, J. P.; Field, R.; Flanagan, G.; Forrest, R.; Franklin, M.; Freeman, J. C.; Frisch, H.; Funakoshi, Y.; Galloni, C.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González López, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Gramellini, E.; Grosso-Pilcher, C.; Guimaraes da Costa, J.; Hahn, S. R.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, M.; Harr, R. F.; Harrington-Taber, T.; Hatakeyama, K.; Hays, C.; Heinrich, J.; Herndon, M.; Hocker, A.; Hong, Z.; Hopkins, W.; Hou, S.; Hughes, R. E.; Husemann, U.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jindariani, S.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kambeitz, M.; Kamon, T.; Karchin, P. E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, J. E.; Kim, M. J.; Kim, S. H.; Kim, S. B.; Kim, Y. J.; Kim, Y. K.; Kimura, N.; Kirby, M.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Kruse, M.; Kuhr, T.; Kurata, M.; Laasanen, A. T.; Lammel, S.; Lancaster, M.; Lannon, K.; Latino, G.; Lee, H. S.; Lee, J. S.; Leo, S.; Leone, S.; Lewis, J. D.; Limosani, A.; Lipeles, E.; Lister, A.; Liu, Q.; Liu, T.; Lockwitz, S.; Loginov, A.; Lucchesi, D.; Lucà, A.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maestro, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Marchese, L.; Margaroli, F.; Marino, P.; Matera, K.; Mattson, M. E.; Mazzacane, A.; Mazzanti, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Moon, C. S.; Moore, R.; Morello, M. J.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Nigmanov, T.; Nodulman, L.; Noh, S. Y.; Norniella, O.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagliarone, C.; Palencia, E.; Palni, P.; Papadimitriou, V.; Parker, W.; Pauletta, G.; Paulini, M.; Paus, C.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Poprocki, S.; Potamianos, K.; Pranko, A.; Prokoshin, F.; Ptohos, F.; Punzi, G.; Redondo Fernández, I.; Renton, P.; Rescigno, M.; Rimondi, F.; Ristori, L.; Robson, A.; Rodriguez, T.; Rolli, S.; Ronzani, M.; Roser, R.; Rosner, J. L.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Sakumoto, W. K.; Sakurai, Y.; Santi, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, E. E.; Schwarz, T.; Scodellaro, L.; Scuri, F.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shochet, M.; Shreyber-Tecker, I.; Simonenko, A.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Song, H.; Sorin, V.; St. Denis, R.; Stancari, M.; Stentz, D.; Strologas, J.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P. K.; Thom, J.; Thomson, E.; Thukral, V.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Ukegawa, F.; Uozumi, S.; Vázquez, F.; Velev, G.; Vellidis, C.; Vernieri, C.; Vidal, M.; Vilar, R.; Vizán, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wallny, R.; Wang, S. M.; Waters, D.; Wester, W. C.; Whiteson, D.; Wicklund, A. B.; Wilbur, S.; Williams, H. H.; Wilson, J. S.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamato, D.; Yang, T.; Yang, U. K.; Yang, Y. C.; Yao, W.-M.; Yeh, G. P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Zanetti, A. M.; Zeng, Y.; Zhou, C.; Zucchelli, S.; CDF Collaboration

2016-06-01

We measure the forward-backward asymmetry of the production of top-quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy √{s }=1.96 TeV using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of 9.1 fb-1 . The asymmetry is characterized by the rapidity difference between top quarks and antiquarks (Δ y ) and measured in the final state with two charged leptons (electrons and muons). The inclusive asymmetry, corrected to the entire phase space at parton level, is measured to be AFBt t ¯=0.12 ±0.13 , consistent with the expectations from the standard model (SM) and previous CDF results in the final state with a single charged lepton. The combination of the CDF measurements of the inclusive AFBt t ¯ in both final states yields AFBt t ¯=0.160 ±0.045 , which is consistent with the SM predictions. We also measure the differential asymmetry as a function of Δ y . A linear fit to AFBt t ¯(|Δ y |), assuming zero asymmetry at Δ y =0 , yields a slope of α =0.14 ±0.15 , consistent with the SM prediction and the previous CDF determination in the final state with a single charged lepton. The combined slope of AFBt t ¯(|Δ y |) in the two final states is α =0.227 ±0.057 , which is 2.0 σ larger than the SM prediction.
17 CFR 8.20 - Final decision.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Final decision. 8.20 Section 8.20 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION EXCHANGE PROCEDURES FOR DISCIPLINARY, SUMMARY, AND MEMBERSHIP DENIAL ACTIONS Disciplinary Procedure § 8.20 Final decision. Each...
Implementation of the full-scale emplacement (FE) experiment at the Mont Terri rock laboratory

Energy Technology Data Exchange (ETDEWEB)

Müller, H.R.; Garitte, B.; Vogt, T.; and others

2017-04-15

Opalinus Clay is currently being assessed as the host rock for a deep geological repository for high-level and low- and intermediate-level radioactive wastes in Switzerland. Within this framework, the 'Full-Scale Emplacement' (FE) experiment was initiated at the Mont Terri rock laboratory close to the small town of St-Ursanne in Switzerland. The FE experiment simulates, as realistically as possible, the construction, waste emplacement, backfilling and early post-closure evolution of a spent fuel/vitrified high-level waste disposal tunnel according to the Swiss repository concept. The main aim of this multiple heater test is the investigation of repository-induced thermo-hydro-mechanical (THM) coupled effects on the host rock at this scale and the validation of existing coupled THM models. For this, several hundred sensors were installed in the rock, the tunnel lining, the bentonite buffer, the heaters and the plug. This paper is structured according to the implementation timeline of the FE experiment. It documents relevant details about the instrumentation, the tunnel construction, the production of the bentonite blocks and the highly compacted 'granulated bentonite mixture' (GBM), the development and construction of the prototype 'backfilling machine' (BFM) and its testing for horizontal GBM emplacement. Finally, the plug construction and the start of all 3 heaters (with a thermal output of 1350 Watt each) in February 2015 are briefly described. In this paper, measurement results representative of the different experimental steps are also presented. Tunnel construction aspects are discussed on the basis of tunnel wall displacements, permeability testing and relative humidity measurements around the tunnel. GBM densities achieved with the BFM in the different off-site mock-up tests and, finally, in the FE tunnel are presented. Finally, in situ thermal conductivity and temperature measurements recorded during the first heating months
DEVELOPING FINAL COURSE MONOGRAPHS USING A TEAM-BASED LEARNING METHODOLOGY

Directory of Open Access Journals (Sweden)

Ani Mari Hartz

2016-04-01

Full Text Available This article describes an experience with the Team-Based Learning (TBL methodology in courses designed to support the planning and execution of final course monographs. It contains both professors’ and students’ perceptions, through observation and assessment. A qualitative approach using observation techniques and desk research was used in conjunction with a quantitative approach based on a questionnaire. The sample consisted of 49 students from a higher education institution, 27 of them in a Communication Course and the remaining 22 in a Business Administration course. Qualitative data analysis was performed through simple categorization with back-defined categories, while the quantitative data analysis employed descriptive statistics and cluster analysis using Minitab 17.1 software. The main findings include the identification of: three student profiles (designated as traditional, collaborative and practical; a preference for guidance and feedback from the professor rather than other students; and a need for a professor-led closing discussion when applying the TBL method. As regards the main benefits to students, they recognized that discussion in groups allowed them to realize how much they really know about the subject studied. Finally, most students seemed to like the TBL approach.
LHC Report: finalizing the shutdown activities

CERN Multimedia

CERN Bulletin

2011-01-01

The maintenance work and other activities scheduled for the LHC technical stop have now been completed and the electrical, quality assurance and powering tests are in full swing. These hardware tests, or hardware re-commissioning as it is known in the CERN Control Centre, are complete for Sectors 5-6 and 6-7. The re-commissioning process is almost complete in Sectors 7-8 and 8-1, but a problem with the emergency stop safety system last week, and the failure of a turbine in the cryogenic plant at Point 8, mean that the final part of the re-commissioning for these two sectors has been delayed and will be completed this week. Preparations for the re-commissioning in the other 4 sectors are going well, and everything is on schedule for the LHC to restart with beam as planned on 18 February. At the SPS, all the technical stop work and magnet changes have been completed and the machine has been handed over to the Operations Group for the usual set of hardware tests and preparations for beam operation. ...
Superconducting quadrupoles for the SLC final focus

International Nuclear Information System (INIS)

Erickson, R.; Fieguth, T.; Murray, J.J.

1987-01-01

The final focus system of the SLC will be upgraded by replacing the final quadrupoles with higher gradient superconducting magnets positioned closer to the interaction point. The parameters of the new system have been chosen to be compatible with the experimental detectors with a minimum of changes to other final focus components. These parameter choices are discussed along with the expected improvement in SLC performance
Superconducting quadrupoles for the SLC final focus

International Nuclear Information System (INIS)

Erickson, R.; Fieguth, T.; Murray, J.J.

1987-01-01

The final focus system of the SLC will be upgraded by replacing the final quadrupoles with higher gradient supperconducting magnets positioned closer to the interaction point. The parameters of the new system have been chosen to be compatible with the experimental detectors with a minimum of changes to other final focus components. These parameter choices are discussed along with the expected improvement in SLC performance
Workplace immersion in the final year of an undergraduate medicine course: the views of final year students and recent graduates.

Science.gov (United States)

Sen Gupta, Tarun; Hays, Richard; Woolley, Torres; Kelly, Gill; Jacobs, Harry

2014-06-01

Most medical schools require formal competence assessment of students immediately prior to graduation, but variation exists in the approach to endpoint assessments. This article reports perceptions of senior students and graduates from a school with a six-year program which has introduced final year workplace immersion placements following a barrier examination at the end of the penultimate Year 5. Final year students (22) and recent graduates (4) attended focus groups and in-depth interviews exploring their perceptions of the value of the curriculum experience during the final two years, the structure and timing of assessment, and their preparation for internship. Participants felt that the penultimate year was more pressured, and focused on passing "artificial" examinations. In contrast, the final year was more relaxed, building skills for postgraduate work and later career development. As a result, students felt well prepared for internship with some indication that the self-directed nature of the final year promoted a lifelong learning approach. The final year workplace immersion model was regarded positively by senior students of this medical school. This model may be a better way of preparing students to be junior doctors than a traditional final year heavy on theoretical learning and assessment.
Full-waveform inversion of GPR data acquired between boreholes in Rustrel carbonates

Directory of Open Access Journals (Sweden)

Pinard Hugo

2016-01-01

Full Text Available Full waveform inversion (FWI of seismic or Ground Penetrating Radar data provides high-resolution quantitative images of the constitutive parameters of the rock/soil which control seismic/GPR wave propagation. We developed a 2D inversion tool in the frequency domain adapted to the multi-parameter physics controlling GPR propagation in isotropic non dispersive media, i.e. dielectric permittivity and electrical conductivity. This inversion engine was previously tested using synthetic 2D data to mitigate the trade-off between the two parameter classes. In this paper, we present the required processing techniques and first inversion results obtained on a real GPR dataset acquired in carbonates with a cross-hole configuration. The presence of the 2 m diameter underground gallery at depth constitutes a nice target to test the robustness, efficiency and resolution of the inversion in such high-contrasts context. Starting from a time tomographic image for the dielectric permittivity and from a homogeneous conductivity, we show that FWI is efficient to retrieve high resolution images of dielectric permittivity but struggles with electrical conductivity. As a quality control, we compare real and synthetic radargrams computed from the tomography and final images, showing the efficiency of the process to reconstruct some events but also underlying some issues, particularly on large incidence angles amplitude traces.
76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Science.gov (United States)

2011-10-24

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the availability of the Final EIS/EIR. By this Notice the BLM is also segregating the public lands within the Tule Project application area from appropriation under the public land laws including the Mining Law, but not the Mineral Leasing or Material Sales Act, for a period of 2 years.
First Full Beam Loading Operation with the CTF3 Linac

CERN Multimedia

Corsini, R; Bienvenu, G; Braun, H; Carron, G; Ferrari, A; Forstner, O; Garvey, Terence; Geschonke, Günther; Groening, L; Jensen, E; Koontz, R; Lefèvre, T; Miller, R; Rinolfi, Louis; Roux, R; Ruth, Ronald D; Schulte, Daniel; Tecker, F A; Thorndahl, L; Yeremian, A D

2004-01-01

The aim of the CLIC (Compact Linear Collider) Study is to investigate the feasibility of a high luminosity, multi-TeV linear e+e- collider. CLIC is based on a two-beam method, in which a high current drive beam is decelerated to produce 30 GHz RF power needed for high-gradient acceleration of the main beam running parallel to it. To demonstrate the outstanding feasibility issues of the scheme a new CLIC Test Facility, CTF3, is being constructed at CERN by an international collaboration. In its final configuration CTF3 will consist of a 150 MeV drive beam linac followed by a 42 m long delay loop and an 84 m combiner ring. The installation will include a 30 GHz high power test stand, a representative CLIC module and a test decelerator. The first part of the linac was installed and commissioned with beam in 2003. The first issue addressed was the generation and acceleration of a high-current drive beam in the "full beam loading" condition where RF power is converted into beam power with an efficiency of more tha...
36 CFR 902.61 - Final determination.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Final determination. 902.61 Section 902.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION FREEDOM OF INFORMATION ACT Time Limitations § 902.61 Final determination. A determination with respect to any appeal made...
Inattentional blindness on the full-attention trial: Are we throwing out the baby with the bathwater?

Science.gov (United States)

White, Rebekah C; Davies, Martin; Aimola Davies, Anne M

2018-03-01

When attention is otherwise engaged, observers may experience inattentional blindness, failing to notice objects or events that are presented in plain sight. In an inattentional blindness experiment, an unexpectedstimulus ispresented alongside primary-task stimuli, and its detection is probed. We evaluate a criterion that is commonly used to exclude observers from the data analysis. On the final experimental trial, observers do not perform the primary task, but instead look for anything new. Observers who fail to report the unexpected stimulus on thisfull-attention trialare excluded. On the basis of 4 hypothetical experiments and a review of 128 actual experiments from the literature, we demonstrate some potentially problematic consequences of implementing the full-attention-trial exclusion criterion. Excluded observers may cluster in experimental conditions and the exclusion criterion may lead researchers to understate the pervasiveness of inattentional blindness. It may even render usblindto inattentional blindness on the full-attention trial. Copyright © 2017 Elsevier Inc. All rights reserved.
High performance shallow water kernels for parallel overland flow simulations based on FullSWOF2D

KAUST Repository

Wittmann, Roland

2017-01-25

We describe code optimization and parallelization procedures applied to the sequential overland flow solver FullSWOF2D. Major difficulties when simulating overland flows comprise dealing with high resolution datasets of large scale areas which either cannot be computed on a single node either due to limited amount of memory or due to too many (time step) iterations resulting from the CFL condition. We address these issues in terms of two major contributions. First, we demonstrate a generic step-by-step transformation of the second order finite volume scheme in FullSWOF2D towards MPI parallelization. Second, the computational kernels are optimized by the use of templates and a portable vectorization approach. We discuss the load imbalance of the flux computation due to dry and wet cells and propose a solution using an efficient cell counting approach. Finally, scalability results are shown for different test scenarios along with a flood simulation benchmark using the Shaheen II supercomputer.
Where Full-Text Is Viable.

Science.gov (United States)

Cotton, P. L.

1987-01-01

Defines two types of online databases: source, referring to those intended to be complete in themselves, whether full-text or abstracts; and bibliographic, meaning those that are not complete. Predictions are made about the future growth rate of these two types of databases, as well as full-text versus abstract databases. (EM)
14 CFR 314.16 - Final determination.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Final determination. 314.16 Section 314.16... REGULATIONS EMPLOYEE PROTECTION PROGRAM Determination of Qualifying Dislocation § 314.16 Final determination... determination and, within 3 business days after the determination, serve a copy of the order on the persons...
24 CFR 7.37 - Final action.

Science.gov (United States)

2010-04-01

..., Color Religion, Sex, National Origin, Age, Disability or Reprisal Complaints § 7.37 Final action. (a... consult with the General Counsel, the Assistant Secretary of Administration, the Office of Human Resources... shall contain notice of the right to appeal the final action to the EEOC, the right to file a civil...
Condición de transversalidad en el problema del líder con nuevo tiempo final libre y función final para la solución de equilibrio jerárquico en la interacción dinámica empresa-gobierno

Directory of Open Access Journals (Sweden)

Boj, E.

1999-01-01

Full Text Available Este trabajo trata de la interacción dinámica entre las empresas y el gobierno. Se presenta un modelo en el cual ambos agentes económicos maximizan sus ganancias totales corrientes actualizadas más el valor inicial de la ganancia final. El concepto de solución utilizado es de equilibrio jerárquico donde el gobierno asume el papel del líder. El método de resolución empleado consiste en enfocar el problema del líder como un problema de control óptimo con nuevo tiempo final libre, dentro del horizonte temporal original [0,T] , y con una nueva función final. Ésta recogerá la ganancia total del gobierno desde el nuevo tiempo final a determinar hasta T. Se hace uso de la correspondiente condición de transversalidad asociada. Se analizan los resultados y su interpretación económica.
Radar Echo Scattering Modeling and Image Simulations of Full-scale Convex Rough Targets at Terahertz Frequencies

Directory of Open Access Journals (Sweden)

Gao Jingkun

2018-02-01

Full Text Available Echo simulation is a precondition for developing radar imaging systems, algorithms, and subsequent applications. Electromagnetic scattering modeling of the target is key to echo simulation. At terahertz (THz frequencies, targets are usually of ultra-large electrical size that makes applying classical electromagnetic calculation methods unpractical. In contrast, the short wavelength makes the surface roughness of targets a factor that cannot be ignored, and this makes the traditional echo simulation methods based on point scattering hypothesis in applicable. Modeling the scattering characteristics of targets and efficiently generating its radar echoes in THz bands has become a problem that must be solved. In this paper, a hierarchical semi-deterministic modeling method is proposed. A full-wave algorithm of rough surfaces is used to calculate the scattered field of facets. Then, the scattered fields of all facets are transformed into the target coordinate system and coherently summed. Finally, the radar echo containing phase information can be obtained. Using small-scale rough models, our method is compared with the standard high-frequency numerical method, which verifies the effectiveness of the proposed method. Imaging results of a full-scale cone-shape target is presented, and the scattering model and echo generation problem of the full-scale convex targets with rough surfaces in THz bands are preliminary solved; this lays the foundation for future research on imaging regimes and algorithms.

Skin cancer full-grown from scar

International Nuclear Information System (INIS)

Zikiryakhodjaev, D.Z.; Sanginov, D.R.

2001-01-01

In this chapter authors investigate the peculiarities of skin cancer full-grown from scar, the theory of it's descent, quote some statistical data on skin cancer full-grown from scar and variety clinical forms of skin cancer full-grown from scar was shown, quote some methods of treatment
Final State Interactions and Polarization Observables in the Reaction pp → pKΛ

Directory of Open Access Journals (Sweden)

Röder Matthias

2012-12-01

Full Text Available Due to the lack of high quality hyperon beams, final state interactions in hyperon production reactions are a compelling tool to study hyperon-nucleon interactions. The COSY-TOF experiment has recently been upgraded in order to reconstruct the pK+Λ final state with sufficient precision to determine the spin triplet pΛ scattering length with a polarized proton beam. We find an unexpected behavior of the K+ analyzing power which prevents the extraction method to be used with the available statistics. A theoretical explanation is pending. Furthermore, the polarized beam together with the self analyzing decay of the Λ allows us to determine the Λ depolarization. This is especially sensitive to K+ and π exchange in the production mechanism. Our finding verifies, to a large extent, the result from DISTO [2] that has so far been the only measurement close to the production threshold.
The transition into veterinary practice: Opinions of recent graduates and final year students

Directory of Open Access Journals (Sweden)

Hudson Neil PH

2011-09-01

Full Text Available Abstract Background The transition from veterinary student to member of the veterinary profession is known to be challenging. This study aimed to determine and compare the opinions of final year veterinary students and recent graduates on graduate attributes that ease this transition. Methods The study was carried out across 3 veterinary schools in the United Kingdom. Paper based or electronic surveys were used. Final year students in the 3 schools were surveyed either electronically (school A or on paper (schools B and C. Student cohort sizes were 112, 227 and 102 respectively. Recent graduates were contacted either at a reunion event (school A or electronically from database records (school B and school C. Cohort sizes of contacted graduates were 80, 175 and 91 respectively. Respondents were asked to rate 42 individual attributes on a 5 point Likert scale. Focus groups with final year students and recent graduates and telephone interviews with recent graduates were carried out. Data were analysed by two researchers through a combination of manual coding and thematic analysis. Data were grouped into broad themes then sorted into narrower themes. Data were then searched for counter examples. Results Response rates for final year students were 34% (school A, 36% (school B and 40% (school C. Response rates for recent graduates were 56% (school A, 20% (school B and 11% (school C. There was a high level of agreement between the cohorts with respect to communication skills, problem solving and decision making skills, recognition of own limitations and the ability to cope with pressure all rated unanimously important or very important. Business acumen, knowledge of veterinary practice management and research skills were the 3 attributes ranked at the bottom of the list. Nine attributes were identified with a significantly different (p Conclusions Recent graduates and final year students rate highly the attributes which help foster the client
Faster-Than-Real-Time Simulation of Lithium Ion Batteries with Full Spatial and Temporal Resolution

Directory of Open Access Journals (Sweden)

Sandip Mazumder

2013-01-01

Full Text Available A one-dimensional coupled electrochemical-thermal model of a lithium ion battery with full temporal and normal-to-electrode spatial resolution is presented. Only a single pair of electrodes is considered in the model. It is shown that simulation of a lithium ion battery with the inclusion of detailed transport phenomena and electrochemistry is possible with faster-than-real-time compute times. The governing conservation equations of mass, charge, and energy are discretized using the finite volume method and solved using an iterative procedure. The model is first successfully validated against experimental data for both charge and discharge processes in a LixC6-LiyMn2O4 battery. Finally, it is demonstrated for an arbitrary rapidly changing transient load typical of a hybrid electric vehicle drive cycle. The model is able to predict the cell voltage of a 15-minute drive cycle in less than 12 seconds of compute time on a laptop with a 2.33 GHz Intel Pentium 4 processor.
KNK I Test Program, Final Report Part 1

International Nuclear Information System (INIS)

Kathol, W.

1976-01-01

The compact sodium cooled nuclear reactor KNK I of the Karlsruhe Research Center reached full power for the first time in February 1974. The goal of KNK I is to collect experience for the construction and operation of larger reactors, such as SNR 300. In order to deepen these experiences, a test program was drawn up and conducted from 1973 until 1975 within the framework of R and D work on the development of fast breeder reactors. The program included individual tasks concerning reactor design, safety instrumentation, irradiation and post-examination as well as behavior of components during operation. The performance of the tests was essentially governed by the licensing procedure imposed under the atomic energy act for the construction and operation of nuclear facilities. This report is the first part of the final report of the test program
The barrel EM is cold and full

CERN Document Server

Fournier, D

After insertion of the two EM wheels in the cryostat in 2003, the cold vessel was finally closed in December (Omega seals and welds). This was then followed by the installation of the solenoid in February, and the closing of the warm vessel in March (see eNews of December 2003). During these few months the LAr cryogenic system was thoroughly tested, and its control system commissioned, each of the ~1000 control points at a time. Finally, in April the cool-down could start. Rather unusual for liquid argon detectors, the cool-down was made in its first part (above 140K) by circulating cold nitrogen gas (instead of liquid nitrogen) in the heat exchangers. The reason was to limit as much as possible temperature gradients in the calorimeter body. With the accordion structure, each of the EM wheel behaves as a single piece, which could be damaged if the supporting rings at its outside would contract faster than the active part inside. Also with improperly controlled gradients, the two wheels - 4 meters in diamete...
HRP facility for fabrication of ITER vertical target divertor full scale plasma facing units

International Nuclear Information System (INIS)

Visca, Eliseo; Roccella, S.; Candura, D.; Palermo, M.; Rossi, P.; Pizzuto, A.; Sanguinetti, G.P.; Mancini, A.; Verdini, L.; Cacciotti, E.; Cerri, V.; Mugnaini, G.; Reale, A.; Giacomi, G.

2015-01-01

Highlights: • R&D activities for the manufacturing of ITER divertor high heat flux plasma-facing components (HHFC). • ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components. • ENEA and ANSALDO NUCLEARE jointly participate to the European program for the qualification of the manufacturing technology for the ITER divertor IVT. • Successful manufacturing by HRP (Hot Radial Pressing) of first full-scale full-W armored IVT qualification prototype. - Abstract: ENEA and Ansaldo Nucleare S.p.A. (ANN) have being deeply involved in the European development activities for the manufacturing of the ITER Divertor Inner Vertical Target (IVT) plasma-facing components. During normal operation the heat flux deposited on the bottom segment of divertor is 5–10 MW/m 2 but the capability to remove up to 20 MW/m 2 during transient events of 10 s must also be demonstrated. In order to fulfill ITER requirements, ENEA has set up and widely tested a manufacturing process, named Hot Radial Pressing (HRP). The last challenge is now to fabricate full-scale prototypes of the IVT, aimed to be qualified for the next step, i.e. the series production. On the basis of the experience of manufacturing hundreds of small mock-ups, ENEA designed and installed a new suitable HRP facility. The objective of getting a final shaped plasma facing unit (PFU) that satisfies these requirements is an ambitious target because tolerances set by ITER/F4E are very tight. The setting-up of the equipment started with the fabrication of full scale and representative ‘dummies’ in which stainless steel instead of CFC or W was used for monoblocks. The results confirmed that dimensions were compliant with the required tolerances. The paper reports a brief description of the innovative HRP equipment and the dimensional check results after HRP of the first full-scale full-W PFU.
HRP facility for fabrication of ITER vertical target divertor full scale plasma facing units

Energy Technology Data Exchange (ETDEWEB)

Visca, Eliseo, E-mail: eliseo.visca@enea.it [Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, IT-00044 Frascati (Roma) (Italy); Roccella, S. [Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, IT-00044 Frascati (Roma) (Italy); Candura, D.; Palermo, M. [Ansaldo Nucleare S.p.A., Corso Perrone 25, IT-16152 Genova (Italy); Rossi, P.; Pizzuto, A. [Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, IT-00044 Frascati (Roma) (Italy); Sanguinetti, G.P. [Ansaldo Nucleare S.p.A., Corso Perrone 25, IT-16152 Genova (Italy); Mancini, A.; Verdini, L.; Cacciotti, E.; Cerri, V.; Mugnaini, G.; Reale, A.; Giacomi, G. [Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, IT-00044 Frascati (Roma) (Italy)

2015-10-15

Highlights: • R&D activities for the manufacturing of ITER divertor high heat flux plasma-facing components (HHFC). • ENEA and Ansaldo have jointly manufactured several actively cooled monoblock mock-ups and prototypical components. • ENEA and ANSALDO NUCLEARE jointly participate to the European program for the qualification of the manufacturing technology for the ITER divertor IVT. • Successful manufacturing by HRP (Hot Radial Pressing) of first full-scale full-W armored IVT qualification prototype. - Abstract: ENEA and Ansaldo Nucleare S.p.A. (ANN) have being deeply involved in the European development activities for the manufacturing of the ITER Divertor Inner Vertical Target (IVT) plasma-facing components. During normal operation the heat flux deposited on the bottom segment of divertor is 5–10 MW/m{sup 2} but the capability to remove up to 20 MW/m{sup 2} during transient events of 10 s must also be demonstrated. In order to fulfill ITER requirements, ENEA has set up and widely tested a manufacturing process, named Hot Radial Pressing (HRP). The last challenge is now to fabricate full-scale prototypes of the IVT, aimed to be qualified for the next step, i.e. the series production. On the basis of the experience of manufacturing hundreds of small mock-ups, ENEA designed and installed a new suitable HRP facility. The objective of getting a final shaped plasma facing unit (PFU) that satisfies these requirements is an ambitious target because tolerances set by ITER/F4E are very tight. The setting-up of the equipment started with the fabrication of full scale and representative ‘dummies’ in which stainless steel instead of CFC or W was used for monoblocks. The results confirmed that dimensions were compliant with the required tolerances. The paper reports a brief description of the innovative HRP equipment and the dimensional check results after HRP of the first full-scale full-W PFU.
77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Science.gov (United States)

2012-04-16

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY... safety standards for full-size and non-full-size baby cribs in response to the direction under section...
WMO Marine Final Reports

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Final reports of the World Meteorological Organization (WMO) Commission for Marine Meteorology, Commission for Synoptic Meteorology, and Commission for Basic...
‘Praise beyond Words’: Psalm 150 as grand finale of the crescendo in the Psalter

Directory of Open Access Journals (Sweden)

Dirk J. Human

2011-04-01

Full Text Available Without doubt the final hymn of the Psalter can be described as the climax, or grand finale, of the Israelite faith’s most known hymnbook. In this psalm, sound and action are blended into a picture of ecstatic joy. The whole universe is called upon to magnify Yah(weh, the God of Israel. The text poses various exegetical challenges. In the past, Psalm 150 was traditionally analysed as a single text; but with the advent of the canonical and redactionhistorical approaches to the interpretation of the Book of Psalms, Psalm 150 can be interpreted as part of the final Hallel (Pss 146–150, or Book V (Pss 107–150 of the Psalter. This view opens up new possibilities for reading the psalm in broader contexts and its broader literary context(s illuminate its theological significance. This article is an attempt at reflecting on the psalm’s context(s, structure, Gattung and dates of origin, tradition-historical relations to the Pentateuch, Psalms and other Old Testament texts. Ultimately some reflections on the psalm’s theological significance will be suggested.
Dream recall and the full moon.

Science.gov (United States)

Schredl, Michael; Fulda, Stephany; Reinhard, Iris

2006-02-01

There is ongoing debate on whether the full moon is associated with sleep and dreaming. The analysis of diaries kept by the participants (N = 196) over 28 to 111 nights showed no association of a full moon and dream recall. Psychological factors might explain why some persons associate a full moon with increased dream recall.
Costs of the final disposal of radioactive wastes

International Nuclear Information System (INIS)

Drasdo, P.

2001-01-01

The study on the costs of radioactive waste disposal covers the topic of national concepts for the countries Germany, France, United Kingdom, Sweden, Switzerland and Unites States of America. The introduction into the topic of radioactive waste disposal is concerned with the classification of radioactive wastes, the safety of final repositories and the different concepts of final disposal. The used methods of data acquisition and data processing are described. The study compares the national final disposal concepts in order to identify the reasons for the differences in capital costs and annuity costs in the respective countries. The final chapter is concerned with the optimum timing for the start-up of operation of final repositories
10 CFR 51.91 - Final environmental impact statement-contents.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-contents. 51.91... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.91 Final environmental impact statement—contents. (a)(1) The final environmental impact statement will include responses...
Design of 5G Full Dimension Massive MIMO Systems

KAUST Repository

Nadeem, Qurrat-Ul-Ain

2017-10-13

This work discusses full-dimension multiple-inputmultiple- output (FD-MIMO) technology, which is currently an active area of research and standardization in wireless communications for evolution towards Fifth Generation (5G) cellular systems. FD-MIMO utilizes an active antenna system (AAS) with a two-dimensional (2D) planar array structure, that not only allows a large number of antenna elements to be packed within feasible base station form factors but also provides the ability of adaptive electronic beamforming in the threedimensional (3D) space. However, the compact structure of largescale planar arrays drastically increases the spatial correlation in FD-MIMO systems. In order to account for its effects, the generalized spatial correlation functions for channels constituted by individual elements and overall antenna ports in the AAS are derived. Exploiting the quasi-static channel covariance matrices of users, the problem of determining the optimal downtilt weight vector for antenna ports, which maximizes the minimum signalto- interference ratio of a multi-user multiple-input-single-output system, is formulated as a fractional optimization problem. A quasi-optimal solution is obtained through the application of semi-definite relaxation and Dinkelbach’s method. Finally, the user-group specific elevation beamforming scenario is devised, which offers significant performance gains as confirmed through simulations. These results have direct application in the analysis of 5G FD-MIMO systems.
Design of 5G Full Dimension Massive MIMO Systems

KAUST Repository

Nadeem, Qurrat-Ul-Ain; Kammoun, Abla; Debbah, Merouane; Alouini, Mohamed-Slim

2017-01-01

This work discusses full-dimension multiple-inputmultiple- output (FD-MIMO) technology, which is currently an active area of research and standardization in wireless communications for evolution towards Fifth Generation (5G) cellular systems. FD-MIMO utilizes an active antenna system (AAS) with a two-dimensional (2D) planar array structure, that not only allows a large number of antenna elements to be packed within feasible base station form factors but also provides the ability of adaptive electronic beamforming in the threedimensional (3D) space. However, the compact structure of largescale planar arrays drastically increases the spatial correlation in FD-MIMO systems. In order to account for its effects, the generalized spatial correlation functions for channels constituted by individual elements and overall antenna ports in the AAS are derived. Exploiting the quasi-static channel covariance matrices of users, the problem of determining the optimal downtilt weight vector for antenna ports, which maximizes the minimum signalto- interference ratio of a multi-user multiple-input-single-output system, is formulated as a fractional optimization problem. A quasi-optimal solution is obtained through the application of semi-definite relaxation and Dinkelbach’s method. Finally, the user-group specific elevation beamforming scenario is devised, which offers significant performance gains as confirmed through simulations. These results have direct application in the analysis of 5G FD-MIMO systems.
Final storage of radioactive waste

International Nuclear Information System (INIS)

Ziehm, Cornelia

2015-01-01

As explained in the present article, operators of nuclear power plants are responsible for the safe final disposal of the radioactive wastes they produce on the strength of the polluter pays principle. To shift the burden of responsibility for safe disposal to society as a whole would violate this principle and is therefore not possible. The polluter pays principle follows from more general principles of the fair distribution of benefits and burdens. Instances of its implementation are to be found in the national Atomic Energy Law as well as in the European Radioactive Waste and Spent Fuel Management Directive. The polluters in this case are in particular responsible for financing the installation and operation of final disposal sites. The reserves accumulated so far for the decommissioning and dismantling of nuclear power plants and disposal of radioactive wastes, including the installation and operation of final disposal sites, should be transferred to a public-law fund. This fund should be supplemented by the polluters to cover further foreseeable costs not covered by the reserves accumulated so far, including a realistic cost increase factor, appropriate risk reserves as well as the costs of the site selection procedure and a share in the costs for the safe closure of the final disposal sites of Morsleben and Asse II. This would merely be implementing in the sphere of atomic law that has long been standard practice in other areas of environmental law involving environmental hazards.
PR and PP evaluation. ESFR full system case study final report (Tentative translation)

International Nuclear Information System (INIS)

Sagara, Hiroshi; Kawakubo, Yoko; Inoue, Naoko

2014-01-01

The Generation IV (GEN IV) International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PRPP WG) was established in December, 2002, as one of the crosscut groups under GIF, in order to develop a methodology for evaluating PR and PP of potential GEN IV options. The group currently consists of the experts from the U.S. national laboratories and universities, from Canada, France, Republic of Korea (ROK), Japan, the International Atomic Energy Agency (IAEA), and European Union(EU). The present report, published in Oct. 2009, was used as a supporting study for development of the evaluation methodology for proliferation resistance and physical protection of GEN IV nuclear energy systems. The present report is summarizing the case study of the PR and PP evaluation of Example Sodium Fast Reactor (ESFR), a hypothetical nuclear energy system consisting of nine main system elements, and it provides for designers the practical experience of applying the PR and PP evaluation methodology to a nuclear energy system. The development of the future nuclear fuel cycle system with sufficient PR and PP features is a crucial task in Japan, and the demonstration and explanation about its effectiveness to the domestic and international society will be required. With the usefulness the present report for such purposes, it was translated and published here as a Japanese-language edition with the concurrence of the OECD-NEA. The original report in English language can be downloaded at the OECD-NEA website. The translation was performed as closely as possible to the original, and special attention was paid to the technical term translation for consistency. Terms difficult to be translated appropriately into Japanese was written with the original English wording. Safeguards terms were translated with reference to “IAEA Safeguards Glossary 2001 Edition” (Japanese), published by the Nuclear Material Control Center Japan (NMCC). The authors are grateful to the GIF PRPP WG Co-chairs, and the OECD-NEA for their assistance in publishing the Japanese version of the report. (author)
Hadron final states in deep inelastic processes

International Nuclear Information System (INIS)

Bjorken, J.D.

1976-05-01

Lectures are presented dealing mainly with the description and discussion of hadron final states in electroproduction, colliding beams, and neutrino reactions from the point of view of the simple parton model. Also the space-time evolution of final states in the parton model is considered. It is found that the picture of space-time evolution of hadron final states in deep inelastic processes isn't totally trivial and that it can be made consistent with the hypotheses of the parton model. 39 references
Practical, real-time, full duplex wireless

KAUST Repository

Jain, Mayank; Choi, Jung Il; Kim, Taemin; Bharadia, Dinesh; Seth, Siddharth; Srinivasan, Kannan; Levis, Philip; Katti, Sachin; Sinha, Prasun

2011-01-01

This paper presents a full duplex radio design using signal inversion and adaptive cancellation. Signal inversion uses a simple design based on a balanced/unbalanced (Balun) transformer. This new design, unlike prior work, supports wideband and high power systems. In theory, this new design has no limitation on bandwidth or power. In practice, we find that the signal inversion technique alone can cancel at least 45dB across a 40MHz bandwidth. Further, combining signal inversion cancellation with cancellation in the digital domain can reduce self-interference by up to 73dB for a 10MHz OFDM signal. This paper also presents a full duplex medium access control (MAC) design and evaluates it using a testbed of 5 prototype full duplex nodes. Full duplex reduces packet losses due to hidden terminals by up to 88%. Full duplex also mitigates unfair channel allocation in AP-based networks, increasing fairness from 0.85 to 0.98 while improving downlink throughput by 110% and uplink throughput by 15%. These experimental results show that a re- design of the wireless network stack to exploit full duplex capability can result in significant improvements in network performance. © 2011 ACM.

Search for heavy resonances in diboson final states at CMS

CERN Multimedia

CERN. Geneva

2017-01-01

With Run 2 of the LHC in full swing, and very successful data collection at a centre-of-mass energy of 13 TeV, the large dataset collected so far provides a significantly improved sensitivity for discovery of new physics with respect to Run 1. Searches for new resonances in di-boson final states (HH, VH, VV, where V = W, Z) with the CMS detector are presented, including new results. The analyses are optimised for high sensitivity over a large range in resonance mass and consider different spin hypotheses. The performance of jet substructure techniques which are used to identify hadronic decays of highly-boosted W, Z, and H are also discussed.
Final disposal of radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Kroebel, R [Kernforschungszentrum Karlsruhe G.m.b.H. (Germany, F.R.). Projekt Wiederaufarbeitung und Abfallbehandlung; Krause, H [Kernforschungszentrum Karlsruhe G.m.b.H. (Germany, F.R.). Abt. zur Behandlung Radioaktiver Abfaelle

1978-08-01

This paper discusses the final disposal possibilities for radioactive wastes in the Federal Republic of Germany and the related questions of waste conditioning, storage methods and safety. The programs in progress in neighbouring CEC countries and in the USA are also mentioned briefly. The autors conclude that the existing final disposal possibilities are sufficiently well known and safe, but that they could be improved still further by future development work. The residual hazard potential of radioactive wastes from fuel reprocessing after about 1000 years of storage is lower that of known inorganic core deposits.
Final Report on Pilot Studies / Final Report on Classroom Research with STEM and TESL Assessment

DEFF Research Database (Denmark)

Biel, Carmen; Wake, Jo Dugstad; Hesse, Friedrich

This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables.......This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables....
Final Exam Weighting as Part of Course Design

Science.gov (United States)

Franke, Matthew

2018-01-01

The weighting of a final exam or a final assignment is an essential part of course design that is rarely discussed in pedagogical literature. Depending on the weighting, a final exam or assignment may provide unequal benefits to students depending on their prior performance in the class. Consequently, uncritical grade weighting can discount…
Global reaction mechanism for the auto-ignition of full boiling range gasoline and kerosene fuels

Science.gov (United States)

Vandersickel, A.; Wright, Y. M.; Boulouchos, K.

2013-12-01

Compact reaction schemes capable of predicting auto-ignition are a prerequisite for the development of strategies to control and optimise homogeneous charge compression ignition (HCCI) engines. In particular for full boiling range fuels exhibiting two stage ignition a tremendous demand exists in the engine development community. The present paper therefore meticulously assesses a previous 7-step reaction scheme developed to predict auto-ignition for four hydrocarbon blends and proposes an important extension of the model constant optimisation procedure, allowing for the model to capture not only ignition delays, but also the evolutions of representative intermediates and heat release rates for a variety of full boiling range fuels. Additionally, an extensive validation of the later evolutions by means of various detailed n-heptane reaction mechanisms from literature has been presented; both for perfectly homogeneous, as well as non-premixed/stratified HCCI conditions. Finally, the models potential to simulate the auto-ignition of various full boiling range fuels is demonstrated by means of experimental shock tube data for six strongly differing fuels, containing e.g. up to 46.7% cyclo-alkanes, 20% napthalenes or complex branched aromatics such as methyl- or ethyl-napthalene. The good predictive capability observed for each of the validation cases as well as the successful parameterisation for each of the six fuels, indicate that the model could, in principle, be applied to any hydrocarbon fuel, providing suitable adjustments to the model parameters are carried out. Combined with the optimisation strategy presented, the model therefore constitutes a major step towards the inclusion of real fuel kinetics into full scale HCCI engine simulations.
Final Hanford Comprehensive Land-Use Plan Environmental Impact Statement, Hanford Site, Richland, Washington

Energy Technology Data Exchange (ETDEWEB)

N/A

1999-10-01

This Final ''Hanford Comprehensive Land-Use Plan Environmental Impact Statement'' (HCP EIS) is being used by the Department of Energy (DOE) and its nine cooperating and consulting agencies to develop a comprehensive land-use plan (CLUP) for the Hanford Site. The DOE will use the Final HCP EIS as a basis for a Record of Decision (ROD) on a CLUP for the Hanford Site. While development of the CLUP will be complete with release of the HCP EIS ROD, full implementation of the CLUP is expected to take at least 50 years. Implementation of the CLUP would begin a more detailed planning process for land-use and facility-use decisions at the Hanford Site. The DOE would use the CLUP to screen proposals. Eventually, management of Hanford Site areas would move toward the CLUP land-use goals. This CLUP process could take more than 50 years to fully achieve the land-use goals.
IRIS Final Technical Progress Report

Energy Technology Data Exchange (ETDEWEB)

M. D. Carelli

2003-11-03

OAK-B135 This NERI project, originally started as the Secure Transportable Autonomous Light Water Reactor (STAR-LW) and currently known as the International Reactor Innovative and Secure (IRIS) project, had the objective of investigating a novel type of water-cooled reactor to satisfy the Generation IV goals: fuel cycle sustainability, enhanced reliability and safety, and improved economics. The research objectives over the three-year (1999-2002) program were as follows: First year: Assess various design alternatives and establish main characteristics of a point design; Second year: Perform feasibility and engineering assessment of the selected design solutions; Third year: Complete reactor design and performance evaluation, including cost assessment These objectives were fully attained and actually they served to launch IRIS as a full fledged project for eventual commercial deployment. The program did not terminate in 2002 at the end of the NERI program, and has just entered in its fifth year. This has been made possible by the IRIS project participants which have grown from the original four member, two-countries team to the current twenty members, nine countries consortium. All the consortium members work under their own funding and it is estimated that the value of their in-kind contributions over the life of the project has been of the order of $30M. Currently, approximately 100 people worldwide are involved in the project. A very important constituency of the IRIS project is the academia: 7 universities from four countries are members of the consortium and five more US universities are associated via parallel NERI programs. To date, 97 students have worked or are working on IRIS; 59 IRIS-related graduate theses have been prepared or are in preparation, and 41 of these students have already graduated with M.S. (33) or Ph.D. (8) degrees. This ''final'' report (final only as far as the NERI program is concerned) summarizes the work performed
Engineering Study for a Full Scale Demonstration of Steam Reforming Black Liquor Gasification at Georgia-Pacific's Mill in Big Island, Virginia; FINAL

International Nuclear Information System (INIS)

Robert De Carrera; Mike Ohl

2002-01-01

Georgia-Pacific Corporation performed an engineering study to determine the feasibility of installing a full-scale demonstration project of steam reforming black liquor chemical recovery at Georgia-Pacific's mill in Big Island, Virginia. The technology considered was the Pulse Enhanced Steam Reforming technology that was developed and patented by Manufacturing and Technology Conversion, International (MTCI) and is currently licensed to StoneChem, Inc., for use in North America. Pilot studies of steam reforming have been carried out on a 25-ton per day reformer at Inland Container's Ontario, California mill and on a 50-ton per day unit at Weyerhaeuser's New Bern, North Carolina mill
Full Life Wind Turbine Gearbox Lubricating Fluids

Energy Technology Data Exchange (ETDEWEB)

Lutz, Glenn A.; Jungk, Manfred; Bryant, Jonathan J.; Lauer, Rebecca S.; Chobot, Anthony; Mayer, Tyler; Palmer, Shane; Kauffman, Robert E.

2012-02-28

Industrial gear box lubricants typically are hydrocarbon based mineral oils with considerable amounts of additives to overcome the lack of base fluid properties like wear protection, oxidation stability, load carrying capacity, low temperature solidification and drop of viscosity at higher temperatures. For today's wind turbine gearboxes, the requirements are more severe and synthetic hydrocarbon oils are used to improve on this, but all such hydrocarbon based lubricants require significant amounts of Extreme Pressure (EP) additives to meet performance requirements. Perfluoropolyether (PFPE) fluids provide load carrying capacity as an inherent property. During the course of the project with the main tasks of 'Establish a Benchmark', 'Lubricant Evaluation', 'Full Scale Gearbox Trial' and 'Economic Evaluation', the PAO Reference oil exhibited significant changes after laboratory gear testing, in service operation in the field and full scale gearbox trial. Four hydrocarbon base oils were selected for comparison in the benchmarking exercise and showed variation with respect to meeting the requirements for the laboratory micro-pitting tests, while the PFPE fluid exceeded the requirements even with the material taken after the full scale gear box trial. This is remarkable for a lubricant without EP additives. Laboratory bearing tests performed on the PFPE fluids before and after the full scale gear box trial showed the results met requirements for the industry standard. The PFPE fluid successfully completed the full scale gear box test program which included baseline and progressive staged load testing. The evaluation of gears showed no micro-pitting or objectionable wear. By the final stage, lubricant film thickness had been reduced to just 21% of its original value, this was by design and resulted in a lambda ratio of well below 1. This test design scenario of a low lambda ratio is a very undesirable lubrication condition
Taxation Human Rights – a Concrete Case: the right to the full income tax deduction of expenses with medicines

Directory of Open Access Journals (Sweden)

Carlos Araújo Leonetti

2015-06-01

Full Text Available This article is intended to address aspecific aspect related to the taxation humanrights: the right to full deduction of expenseswith medicines from the basis for calculat-ing the income tax. After a brief introductionto the topic of taxation human rights a rela-tively new vision in universal law, the articlemakes a foray into the income tax-individual,revisiting its basic concepts and principles. Ispresented, also, a brief history of the IRPF inBrazil, in order to better situate the subject infocus. In the sequel, the article faces the ques-tion about the deductions allowed, on the ba-sis of calculation of the tax. Finally, the articleanalizes the possible inclusion of spending onmedicines among these deductions, conclud-ing that it is an imperative of Fairness and re-spect to the Constitution
40 CFR 124.61 - Final environmental impact statement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Final environmental impact statement... environmental impact statement. No final NPDES permit for a new source shall be issued until at least 30 days after the date of issuance of a final environmental impact statement if one is required under 40 CFR 6...
Simulation of Silver Thin Films' Growth and Influence of Deposition Rate on Final Grain Size under Angle Flux and Standard Situation

Directory of Open Access Journals (Sweden)

Maryam Jamshidnejad

2011-01-01

Full Text Available In this paper, a 2D stimulation model, FACET, is used for investigation of the relation between micro structure and deposition conditions such as substrate temperature, deposition rate and deposition angle of Ag thin films. It is observed that by increasing the deposition rate in standard conditions providing that the temperature of substrate is low, the average of final grain size is decreased. While, in deposition with angle flux the average of final grain size is increased.
Some economic aspects of the conversion of raw materials into final products

Energy Technology Data Exchange (ETDEWEB)

Pick, H J [Univ. of Aston, Birmingham, Eng.; Becker, P E

1978-01-01

In a previous paper Pick and Becker analyzed the direct and indirect relations between energy and the ''physical structure'' materials used by the engineering and construction industries. The present paper provides a more general description of materials conversion from natural resources to final products. The cost of raw materials, only some 30 percent of which come from the developing countries, accounts for a relatively small proportion of final product costs, the remaining product costs arising from the progressive application of labor, capital, energy, etc. Emphasis is placed on the complete interdependence of the inputs to manufacturing; a change in any one having implications for the remainder. Materials substitution, while in principle providing an adaptive mechanism to change, also has implications for a wide range of factors of production and for social and industrial issues such as regional employment, the demand for specific trades and professions, for research and development and for industrial structure and capital investment. Full allowance for this interdependence needs to be an integral part of effective long term policy formulation and of research and development planning.
75 FR 19357 - Honey From the People's Republic of China: Notice of Amended Final Results Pursuant to Final...

Science.gov (United States)

2010-04-14

... and Animal By-Products Import & Export Group Corp. v. United States, 2009 U.S. App. LEXIS 24374 (Fed... or Scot T. Fullerton, AD/CVD Operations, Office 9, Import Administration, U.S. Department of Commerce... Republic of China: Notice of Amended Final Results Pursuant to Final Court Decision AGENCY: Import...
Bacterial community structure and variation in a full-scale seawater desalination plant for drinking water production

KAUST Repository

Belila, Abdelaziz

2016-02-18

Microbial processes inevitably play a role in membrane-based desalination plants, mainly recognized as membrane biofouling. We assessed the bacterial community structure and diversity during different treatment steps in a full-scale seawater desalination plant producing 40,000 m3/d of drinking water. Water samples were taken over the full treatment train consisting of chlorination, spruce media and cartridge filters, de-chlorination, first and second pass reverse osmosis (RO) membranes and final chlorine dosage for drinking water distribution. The water samples were analyzed for water quality parameters (total bacterial cell number, total organic carbon, conductivity, pH, etc.) and microbial community composition by 16S rRNA gene pyrosequencing. The planktonic microbial community was dominated by Proteobacteria (48.6%) followed by Bacteroidetes (15%), Firmicutes (9.3%) and Cyanobacteria (4.9%). During the pretreatment step, the spruce media filter did not impact the bacterial community composition dominated by Proteobacteria. In contrast, the RO and final chlorination treatment steps reduced the Proteobacterial relative abundance in the produced water where Firmicutes constituted the most dominant bacterial group. Shannon and Chao1 diversity indices showed that bacterial species richness and diversity decreased during the seawater desalination process. The two-stage RO filtration strongly reduced the water conductivity (>99%), TOC concentration (98.5%) and total bacterial cell number (>99%), albeit some bacterial DNA was found in the water after RO filtration. About 0.25% of the total bacterial operational taxonomic units (OTUs) were present in all stages of the desalination plant: the seawater, the RO permeates and the chlorinated drinking water, suggesting that these bacterial strains can survive in different environments such as high/low salt concentration and with/without residual disinfectant. These bacterial strains were not caused by contamination during
Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

John Ross

2003-04-30

The Final Technical Report summarizes research accomplishments and Publications in the period of 5/1/99 to 4/30/03 done on the grant. Extensive progress was made in the period covered by this report in the areas of chemical kinetics of non-linear systems; spatial structures, reaction - diffusion systems, and thermodynamic and stochastic theory of electrochemical and general systems.
Transacsys PLC - Final Results

CERN Multimedia

2002-01-01

Final results from Transacsys PLC. A subsidary of this company was set up to develop the CERN EDH system into a commercial product but incurred too much financial loss so the project was cancelled (1/2 page).
Immediate prostheses on one-piece trans-mucosal implants in flapless surgical procedures Case Series Report. Part I: full arch rehabilitations

Directory of Open Access Journals (Sweden)

Aris Petros Tripodakis

2012-06-01

Full Text Available Aim: The aim of the present case series report is to illustrate a clinical technique and present the application of onepiece transmucosal implants in flapless surgical procedures, supporting full arch immediate prostheses. Materials and methods: A total of 294 implants (Xive TG, Friadent, Germany have been used to support full arch immediate prostheses, over the last six years and have been in function for at least one year. The surgical placement of five or more implants per case involved immediate extraction and intrasocket flapless placement, combined with minimal flap elevation in the areas of healed extraction sites (43 mandibular and 7 maxillary arches. In all cases immediate provisionalization followed. Detailed three-dimensional cone-beam localized volumetric tomography preceeded the surgical procedures. The delivery of the final ceramo-metal prostheses was accomplished within a 20 day period. Materials and methods: Results Six implants failed to osseointegrate. All other implants are still successfully bearing the final prosthesis for the time that they have been followed. Soft tissue reaction was favorable from both the biologic and esthetic point of view. Conclusion: The flapless placement of one piece implants into edentulous healed sites is a predictable procedure in the presence of abundance of supporting bone as confirmed by 3-D imaging. On the other hand, immediate extraction placement of one piece implants allows the engagement of sound bone located deeper into the socket and provides adequate mechanical support of the soft tissue architecture that is preserved predictably. In all cases the prosthetic procedures are accomplished without disturbing the hardsoft tissue interface as the abutment-prosthesis interface is coronally elevated by the virtual design of the implant.
THE QUANTITATIVE MODEL OF THE FINALIZATIONS IN MEN’S COMPETITIVE HANDBALL AND THEIR EFFICIENCY

Directory of Open Access Journals (Sweden)

Eftene Alexandru

2009-10-01

Full Text Available In the epistemic steps, we approach a competitive performance behavior model build after a quantitativeanalysis of certain data collected from the official International Handball Federation protocols on theperformance of the first four teams of the World Men's Handball Championship - Croatia 2009, duringsemifinals and finals.This model is a part of the integrative (global model of the handball game, which will be graduallyinvestigated during the following research.I have started the construction of this model from the premise that the finalization represents theessence of the game.The components of our model, in a prioritized order: shot at the goal from 9m- 15p; shot at the goalfrom 6m- 12p; shot at the goal from 7m- 12p; fast break shot at the goal - 11,5p; wing shot at the goal - 8,5p;penetration shot at the goal - 7p;
Achieving single channel, full duplex wireless communication

KAUST Repository

Choi, Jung Il; Jain, Mayank; Srinivasan, Kannan; Levis, Phil; Katti, Sachin

2010-01-01

This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the full-duplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays. Copyright 2010 ACM.

Constructing integrable full-pressure full-current free-boundary stellarator magnetohydrodynamic equilibrium solutions

International Nuclear Information System (INIS)

Hudson, S.R.

2002-01-01

For stellarators to be feasible candidates for fusion power stations it is essential that the magnetic field lines lie on nested flux surfaces; however, the lack of a continuous symmetry implies that magnetic islands, caused by Pfirsch-Schlueter currents, diamagnetic currents and resonant coil fields, are guaranteed to exist. The challenge is to design the plasma and coils such that these effects cancel. Magnetic islands in free-boundary full-pressure full-current stellarator magnetohydrodynamic equilibria are suppressed using a procedure based on the PIES code [Comp. Phys. Comm., 43:157, 1986] which iterates the equilibrium equations to obtain the plasma equilibrium. At each iteration, changes to a Fourier representation of the coil geometry are made to cancel resonant fields produced by the plasma. The changes are constrained to lie in the nullspace of certain measures of engineering acceptability and kink stability. As the iterations continue, the coil geometry and the plasma simultaneously converge to an equilibrium in which the island content is negligible. The method is applied to a candidate plasma and coil design for NCSX [Phys. Plas., 7:1911, 2000]. (author)
Changes to Workflow and Process Measures in the PICU During Transition From Semi to Full Electronic Health Record.

Science.gov (United States)

Salib, Mina; Hoffmann, Raymond G; Dasgupta, Mahua; Zimmerman, Haydee; Hanson, Sheila

2015-10-01

Studies showing the changes in workflow during transition from semi to full electronic medical records are lacking. This objective study is to identify the changes in workflow in the PICU during transition from semi to full electronic health record. Prospective observational study. Children's Hospital of Wisconsin Institutional Review Board waived the need for approval so this study was institutional review board exempt. This study measured clinical workflow variables at a 72-bed PICU during different phases of transition to a full electronic health record, which occurred on November 4, 2012. Phases of electronic health record transition were defined as follows: pre-electronic health record (baseline data prior to transition to full electronic health record), transition phase (3 wk after electronic health record), and stabilization (6 mo after electronic health record). Data were analyzed for the three phases using Mann-Whitney U test with a two-sided p value of less than 0.05 considered significant. Seventy-two bed PICU. All patients in the PICU were included during the study periods. Five hundred and sixty-four patients with 2,355 patient days were evaluated in the three phases. Duration of rounds decreased from a median of 9 minutes per patient pre--electronic health record to 7 minutes per patient post electronic health record. Time to final note decreased from 2.06 days pre--electronic health record to 0.5 days post electronic health record. Time to first medication administration after admission also decreased from 33 minutes pre--electronic health record and 7 minutes post electronic health record. Time to Time to medication reconciliation was significantly higher pre-electronic health record than post electronic health record and percent of medication reconciliation completion was significantly lower pre--electronic health record than post electronic health record and percent of medication reconciliation completion was significantly higher pre
Head-on collisions of binary white dwarf-neutron stars: Simulations in full general relativity

International Nuclear Information System (INIS)

Paschalidis, Vasileios; Etienne, Zachariah; Liu, Yuk Tung; Shapiro, Stuart L.

2011-01-01

We simulate head-on collisions from rest at large separation of binary white dwarf-neutron stars (WDNSs) in full general relativity. Our study serves as a prelude to our analysis of the circular binary WDNS problem. We focus on compact binaries whose total mass exceeds the maximum mass that a cold-degenerate star can support, and our goal is to determine the fate of such systems. A fully general relativistic hydrodynamic computation of a realistic WDNS head-on collision is prohibitive due to the large range of dynamical time scales and length scales involved. For this reason, we construct an equation of state (EOS) which captures the main physical features of neutron stars (NSs) while, at the same time, scales down the size of white dwarfs (WDs). We call these scaled-down WD models 'pseudo-WDs (pWDs)'. Using pWDs, we can study these systems via a sequence of simulations where the size of the pWD gradually increases toward the realistic case. We perform two sets of simulations; One set studies the effects of the NS mass on the final outcome, when the pWD is kept fixed. The other set studies the effect of the pWD compaction on the final outcome, when the pWD mass and the NS are kept fixed. All simulations show that after the collision, 14%-18% of the initial total rest mass escapes to infinity. All remnant masses still exceed the maximum rest mass that our cold EOS can support (1.92M · ), but no case leads to prompt collapse to a black hole. This outcome arises because the final configurations are hot. All cases settle into spherical, quasiequilibrium configurations consisting of a cold NS core surrounded by a hot mantle, resembling Thorne-Zytkow objects. Extrapolating our results to realistic WD compactions, we predict that the likely outcome of a head-on collision of a realistic, massive WDNS system will be the formation of a quasiequilibrium Thorne-Zytkow-like object.
Final focus test beam

International Nuclear Information System (INIS)

1991-03-01

This report discusses the following: the Final Focus Test Beam Project; optical design; magnets; instrumentation; magnetic measurement and BPM calibration; mechanical alignment and stabilization; vacuum system; power supplies; control system; radiation shielding and personnel protection; infrastructure; and administration
Report and analysis on 'PR and PP evaluation. Example sodium fast reactor full system case study'

International Nuclear Information System (INIS)

Sagara, Hiroshi; Inoue, Naoko; Kawakubo, Yoko; Watahiki, Masaru

2011-01-01

The Generation IV (GEN IV) Nuclear Energy Systems International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PRPP WG) was established in December 2002 in order to develop the PR and valuation methodology for GEN IV nuclear energy systems. In the final report of 'PR and PP Evaluation: Example Sodium Fast Reactor (ESFR) Full System Case Study,' issued in October 2009, the demonstration study of PR and PP evaluation with the qualitative approach are summarized using ESFR with four scenario threats. The present paper reviews and analyzes some results of the ESFR case study, and identifies the challenges and direction for the PR and PP evaluation methodology with quantitative approach. (author)
The final focus test beam project

International Nuclear Information System (INIS)

Burke, D.

1991-05-01

An overview is given of the Final Focus Test Beam (FFTB) that is being constructed as a prototype final focus system for a future electron-positron linear collider. This beam line will use as input the 50 GeV electron beam from the SLC linac, and is designed to reduce the transverse dimensions of the beam spot at the focal point to 1 μm. 5 refs., 2 figs., 1 tab
Full system decontamination feasibility studies

International Nuclear Information System (INIS)

Denault, R.P.; LeSurf, J.E.; Walschot, F.W.

1988-01-01

Many chemical decontaminations have been performed on subsystems in light water reactors (BWRs and PWRs) but none on the full system (including the fuel) of large, (>500 MWe) investor owned reactors. Full system decontaminations on pressure-tubed reactors have been shown to facilitate maintenance, inspection, repair and replacement of reactor components. Further advantages are increased reactor availability and plant life extension. A conceptual study has been performed for EPRI (for PWRs) and Commonwealth Edison Co (for BWRs) into the applicability and cost benefit of full system decontaminations (FSD). The joint study showed that FSDs in both PWRs and BWRs, with or without the fuel included in the decontamination, are feasible and cost beneficial provided a large amount of work is to be done following the decontamination. The large amounts of radioactive waste generated can be managed using current technologies. Considerable improvements in waste handling, and consequent cost savings, can be obtained if new techniques which are now reaching commercial application are used. (author)
LHCb : Full Experiment System Test

CERN Multimedia

Cattaneo, M

2009-01-01

LHCb had been planning to commission its High Level Trigger software and Data Quality monitoring procedures using real collisions data from the LHC pilot run. Following the LHC incident on 19th September 2008, it was decided to commission the system using simulated data. This “Full Experiment System Test” consists of: - Injection of simulated minimum bias events into the full HLT farm, after selection by a simulated Level 0 trigger. - Processing in the HLT farm to achieve the output rate expected for nominal LHC luminosity running, sustained over the typical duration of an LHC fill. - Real time Data Quality validation of the HLT output, validation of calibration and alignment parameters for use in the reconstruction. - Transmission of the event data, calibration data and book-keeping information to Tier1 sites and full reconstruction of the event data. - Data Quality validation of the reconstruction output. We will report on the preparations and results of FEST09, and on the status of commissioning for no...
77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

Science.gov (United States)

2012-07-26

... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety... standards for full-size and non-full-size baby cribs in response to the direction under section 104(b) of...
A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment.

Science.gov (United States)

Bertanza, Giorgio; Canato, Matteo; Laera, Giuseppe; Vaccari, Mentore; Svanström, Magdalena; Heimersson, Sara

2017-07-01

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.
50 CFR 11.16 - Final administrative decision.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Final administrative decision. 11.16... TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS CIVIL PROCEDURES Assessment Procedure § 11.16 Final administrative decision. (a) Where no request...
Evaluation of the tolerance to Finale® in the germination and regeneration of Cuban rice varieties (IACuba-17 and IACuba-19

Directory of Open Access Journals (Sweden)

Daymí Abreu

2005-01-01

Full Text Available Selection agent used during the shoot selection has an important role on the transgenic plant generation efficiency. In this work, the tolerance to the herbicide Finale® in two Cuban rice cultivars, IACuba17 and IACuba-19 was evaluated, and determined that 10 days exposure to 5 and 10 mg.l-1 of Finale® were enough to avoid seedlings of IAC-17 and IAC-19, respectively. Cultivated calluses (0, 2, 4 and 6 days in the absence of Finale®in the regeneration medium were used to evaluate the minimal concentration of Finale®that totally inhibits shoot regeneration. Pre-induced calluses cultured during two days and 3 mg.l-1 of Finale® in the regeneration medium was the most efficient combination to select shoots during the generation of transgenic plants resistant to the herbicide. Our shoot selection procedure reduces to 3 weeks the time to obtain shoots during the generation of transgenic rice plants. Key words: germination, mature seeds, Oryza, phosphinothricin, regeneration, selection markers
Dihadron production at the LHC: full next-to-leading BFKL calculation

Energy Technology Data Exchange (ETDEWEB)

Celiberto, Francesco G.; Papa, Alessandro [Dipartimento di Fisica dell' Universita della Calabria, Arcavacata di Rende, Cosenza (Italy); INFN-Gruppo collegato di Cosenza, Arcavacata di Rende, Cosenza (Italy); Ivanov, Dmitry Yu. [Sobolev Institute of Mathematics, Novosibirsk (Russian Federation); Novosibirsk State University, Novosibirsk (Russian Federation); Murdaca, Beatrice [INFN-Gruppo collegato di Cosenza, Arcavacata di Rende, Cosenza (Italy)

2017-06-15

The study of the inclusive production of a pair of charged light hadrons (a ''dihadron'' system) featuring high transverse momenta and well separated in rapidity represents a clear channel for the test of the BFKL dynamics at the Large Hadron Collider (LHC). This process has much in common with the well-known Mueller-Navelet jet production; however, hadrons can be detected at much smaller values of the transverse momentum than jets, thus allowing to explore an additional kinematic range, supplementary to the one studied with Mueller-Navelet jets. Furthermore, it makes it possible to constrain not only the parton densities (PDFs) for the initial proton, but also the parton fragmentation functions (FFs) describing the detected hadron in the final state. Here, we present the first full NLA BFKL analysis for cross sections and azimuthal angle correlations for dihadrons produced in the LHC kinematic ranges. We make use of the Brodsky-Lapage-Mackenzie optimization method to set the values of the renormalization scale and study the effect of choosing different values for the factorization scale. We also gauge the uncertainty coming from the use of different PDF and FF parametrizations. (orig.)
Full scale test results for ship ice impact forces and pressures

International Nuclear Information System (INIS)

Ghoneim, G.A.

1993-01-01

A set of full scale impact tests were carried out for the icebreakers Canmar Kigoriak and Robert LeMeur in first and multi-year ice conditions in the southern Beaufort Sea. Preliminary results of the testing program were published in Ghoneim et al. (1984). This paper presents some salient results of further analysis of the data. This includes a description of the different types of ice ramming mechanisms and the corresponding ice force time histories and ship response. A comparison between the bow force peak values for the kigoriak and the Robert LeMeur is made and the reasons for the difference are evaluated. The question of dynamic magnification of the response is investigated. The relationship between the peak impact force and the ramming velocity is evaluated for both ships and compared with theoretical and empirical formulations. Other parametric relationships are presented, including such parameters as force duration and relative magnitude of the impact and beaching bow forces. The added mass is evaluated from measured accelerations and calculated bow forces and are shown to be time dependent. The relationship between ice pressure and corresponding contact area is discussed. Finally, conclusions and recommendations are presented
Dihadron production at the LHC: full next-to-leading BFKL calculation

Science.gov (United States)

Celiberto, Francesco G.; Ivanov, Dmitry Yu.; Murdaca, Beatrice; Papa, Alessandro

2017-06-01

The study of the inclusive production of a pair of charged light hadrons (a "dihadron" system) featuring high transverse momenta and well separated in rapidity represents a clear channel for the test of the BFKL dynamics at the Large Hadron Collider (LHC). This process has much in common with the well-known Mueller-Navelet jet production; however, hadrons can be detected at much smaller values of the transverse momentum than jets, thus allowing to explore an additional kinematic range, supplementary to the one studied with Mueller-Navelet jets. Furthermore, it makes it possible to constrain not only the parton densities (PDFs) for the initial proton, but also the parton fragmentation functions (FFs) describing the detected hadron in the final state. Here, we present the first full NLA BFKL analysis for cross sections and azimuthal angle correlations for dihadrons produced in the LHC kinematic ranges. We make use of the Brodsky-Lapage-Mackenzie optimization method to set the values of the renormalization scale and study the effect of choosing different values for the factorization scale. We also gauge the uncertainty coming from the use of different PDF and FF parametrizations.
Characterization of an SRF gun: a 3D full wave simulation

International Nuclear Information System (INIS)

Wang, E.; Ben-Zvi, I.; Wang, J.

2011-01-01

We characterized a BNL 1.3GHz half-cell SRF gun is tested for GaAs photocathode. The gun already was simulated several years ago via two-dimensional (2D) numerical codes (i.e., Superfish and Parmela) with and without the beam. In this paper, we discuss our investigation of its characteristics using a three dimensional (3D) full-wave code (CST STUDIO SUITE(trademark)).The input/pickup couplers are sited symmetrically on the same side of the gun at an angle of 180 o . In particular, the inner conductor of the pickup coupler is considerably shorter than that of the input coupler. We evaluated the cross-talk between the beam (trajectory) and the signal on the input coupler compared our findings with published results based on analytical models. The CST STUDIO SUITE(trademark) also was used to predict the field within the cavity; particularly, a combination of transient/eigenmode solvers was employed to accurately construct the RF field for the particles, which also includes the effects of the couplers. Finally, we explored the beam's dynamics with a particle in cell (PIC) simulation, validated the results and compare them with 2D code result.
Zachary-Fort Lauderdale pipeline construction and conversion project: final supplement to final environmental impact statement. Docket No. CP74-192

Energy Technology Data Exchange (ETDEWEB)

None

1980-05-01

This Final Supplement to the Final Environmental Impact Statement (Final Supplement) evaluates the economic, engineering, and environmental aspects of newly developed alternatives to an abandonment/conversion project proposed by Florida Gas Transmission Company (Florida Gas). It also updates the staff's previous FEIS and studies revisions to the original proposal. Wherever possible, the staff has adopted portions of its previous FEIS in lieu of reprinting portions of that analysis which require no change. 60 references, 8 figures, 35 tables.
Close set in volleyball. Differences and discriminatory power of final game actions in formative stages

Directory of Open Access Journals (Sweden)

Dávila Romero, Carlos

2012-01-01

Full Text Available The aim of this study was to establish which final game actions discriminate final victories and defeats in women volleyball formative stages during ended sets, which are solved by regulation with a minimal advantage of two points. A total of 57 sets were analyzed in infantile category and 69 sets in cadet category during the national volleyball championship at school age (12-16, Valladolid 2008 and Huelva 2009. Statistics analysis shows differences between the condition of both the winner and the loser teams in sets in the positive attack in infantile category and in positive block and error in cadet category. Discriminative analysis, statistical test that determines those most significant game actions when establishing the differences existing between the winner and loser teams, shows how to predict victory and defeat in the ended sets regarding the positive attack, negative service and error in infantile category and positive block and error in cadet category. These ones suggest that during decisive set moments in both categories, either technical gestures control or errors which arise from a regulation infraction may predict their final performance.
Labeling and effectiveness testing; sunscreen drug products for over-the-counter human use; delay of compliance dates. Final rule; delay of compliance dates; request for comments.

Science.gov (United States)

2012-05-11

The Food and Drug Administration (FDA) is delaying the compliance dates for the final rule for over-the-counter (OTC) sunscreen drug products that published in the Federal Register of June 17, 2011 (76 FR 35620). The final rule establishes labeling and effectiveness testing for certain OTC sunscreen products containing specified active ingredients and marketed without approved applications. It also amends labeling claims that are not currently supported by data and lifts the previously-published delay of implementation of the Drug Facts labeling requirements for OTC sunscreens. The 2011 final rule's compliance dates are being delayed because information received after publication of the 2011 final rule indicates that full implementation of the 2011 final rule's requirements for all affected products will require an additional 6 months. This final rule is part of FDA's ongoing review of OTC drug products.
Final rubbery state characterization using a hollow cylinder dynamic shear sample on DMA7

Directory of Open Access Journals (Sweden)

Vilaiporn Luksameevanish

2004-09-01

Full Text Available Dynamic properties of raw natural rubber were examined using a hollow cylinder shaped samplesubjected to shear deformation on a laboratory Dynamic Mechanical Analyser. According to Cox-Merz’s study, dynamic complex viscosity obtained by this method showed a good agreement with shear flow viscosity measured by capillary rheometer. A master curve derived from the dynamic properties were then characterized. A crossing point of storage modulus (G’ and loss modulus (G’’ curves in the master curves was used to identify the final rubbery state, which indicated the transition of rubbery state and molten state. The position of this point depends on quantities and types of reinforcing or non-reinforcing fillers. The final rubbery state was shifted to higher frequency or lower temperature. It was found that the final rubbery state of CaCO3-filled rubber compounds was shifted to higher frequency or lower temperature by approximately 4 decades, while the translation of carbon black-filled rubber compounds was lower than unfilled rubber by about 1 decade. This phenomenon can be used to explain rubber elasticity, i.e. a decreasing of die swell of CaCO3 filled compounds at any high processing temperature. On the other hand, high magnitude of die swell for carbon black filled compound was still obtained.

Final disposal room structural response calculations

International Nuclear Information System (INIS)

Stone, C.M.

1997-08-01

Finite element calculations have been performed to determine the structural response of waste-filled disposal rooms at the WIPP for a period of 10,000 years after emplacement of the waste. The calculations were performed to generate the porosity surface data for the final set of compliance calculations. The most recent reference data for the stratigraphy, waste characterization, gas generation potential, and nonlinear material response have been brought together for this final set of calculations
Final Test Analysis of Post Graduate Medical Residents

Directory of Open Access Journals (Sweden)

Maliheh Arab

2009-04-01

Full Text Available Background and purpose: Multiple choice questions are the most frequent test for medical students. It is important to analysis the overall response to individual questions in the test.The aim of this study is to analyse questions of post graduate medical residency tests.Methods: Final annual local (Ramadan medical school and national tests given to three Residency groups including 17 Obstetrics and gynecology testees, 7 pediatrics and 12 internal medicine in 2004 were studied. In local tests residents answered to 148, 150 and 144 and in national tests to ISO MCQS. Questions were evaluated regarding cognitive domain level, Difficultly index and Discriminative index and finally to evaluate the optimal, proper, acceptable and ''must omitted" questions.Results: Questions of local Obstetrics and gynecology, pediatrics and internal medicine tests evaluated the "recall" level in 72%, 72% and 51% and in national tests 71%, 35% and 19%, respectively. Questions with Discriminative indices of 0.7 or more (proper were 3 and 5% in Obstetrics and gynecology, 3.5% and 1% in pediatrics and 1% in local and national tests. Proper difficulty indices (30-70 were shown in 53% and 54% in Obstetrics and gynecology, 34% and 43% in pediatrics and 40% and 42% in internal medicine. Generally evaluating, "must omitted" questions in local and national tests were 76% in Obstetrics and gynecology, 81% and 79% in pediatrics and 91% and 85% in internal medicine. The most common causes making the questions to be considered "must omitted" in studied tests were negative, zero or less than 0.2 Discriminative indices.Conclusion: Test analysis of final annual local (Ramadan medical school and national tests of Obstetrics and gynecology, Pediatrics and internal medicine residency programs in 2004 revealed that most of the questions are planned in "recall" level, harbor improper
Education Intervention on Chronotherapy for Final-Year Pharmacy Students

Directory of Open Access Journals (Sweden)

Gagandeep Kaur

2015-11-01

Full Text Available Chronotherapy involves altering the timing of medication administration in coordination with the body’s circadian rhythms to improve the overall control of disease and to minimise treatment side effects. Training on chronotherapy requires students to map different topics learnt in earlier years of their professional degree and apply these concepts clinically. This requires strategic educational design. Therefore, the aim of the study was to develop, implement and evaluate an educational intervention focusing on the application of chronotherapy for final-year undergraduate pharmacy students. An educational intervention utilizing multiple learning strategies for enhancing chronotherapy related awareness was designed and implemented in the final year undergraduate pharmacy cohort at the University of Sydney Australia (2013. A custom-designed questionnaire measuring awareness about (13 items scored 0 or 1, and attitudes (12 items scored on a Likert scale of 1–5 towards chronotherapy was administered pre and post intervention to evaluate its impact. The pre-intervention mean total awareness and attitude scores were 6.5 ± 2.0 (score range 0–13 and 47.4 ± 6.9 (score range 12–60 respectively. The mean total post-intervention scores were significantly higher for total awareness (10.1 ± 1.9 and attitude (54.0 ± 6.0. Carefully designed educational interventions utilising pedagogic principles for pharmacy students can improve awareness of and enhance positive attitudes toward pharmacists’ roles in optimizing drug therapy using chronotherapy.
Optimal Inversion Parameters for Full Waveform Inversion using OBS Data Set

Science.gov (United States)

Kim, S.; Chung, W.; Shin, S.; Kim, D.; Lee, D.

2017-12-01

In recent years, full Waveform Inversion (FWI) has been the most researched technique in seismic data processing. It uses the residuals between observed and modeled data as an objective function; thereafter, the final subsurface velocity model is generated through a series of iterations meant to minimize the residuals.Research on FWI has expanded from acoustic media to elastic media. In acoustic media, the subsurface property is defined by P-velocity; however, in elastic media, properties are defined by multiple parameters, such as P-velocity, S-velocity, and density. Further, the elastic media can also be defined by Lamé constants, density or impedance PI, SI; consequently, research is being carried out to ascertain the optimal parameters.From results of advanced exploration equipment and Ocean Bottom Seismic (OBS) survey, it is now possible to obtain multi-component seismic data. However, to perform FWI on these data and generate an accurate subsurface model, it is important to determine optimal inversion parameters among (Vp, Vs, ρ), (λ, μ, ρ), and (PI, SI) in elastic media. In this study, staggered grid finite difference method was applied to simulate OBS survey. As in inversion, l2-norm was set as objective function. Further, the accurate computation of gradient direction was performed using the back-propagation technique and its scaling was done using the Pseudo-hessian matrix.In acoustic media, only Vp is used as the inversion parameter. In contrast, various sets of parameters, such as (Vp, Vs, ρ) and (λ, μ, ρ) can be used to define inversion in elastic media. Therefore, it is important to ascertain the parameter that gives the most accurate result for inversion with OBS data set.In this study, we generated Vp and Vs subsurface models by using (λ, μ, ρ) and (Vp, Vs, ρ) as inversion parameters in every iteration, and compared the final two FWI results.This research was supported by the Basic Research Project(17-3312) of the Korea Institute of
Full waveform inversion using envelope-based global correlation norm

Science.gov (United States)

Oh, Ju-Won; Alkhalifah, Tariq

2018-05-01

To increase the feasibility of full waveform inversion on real data, we suggest a new objective function, which is defined as the global correlation of the envelopes of modelled and observed data. The envelope-based global correlation norm has the advantage of the envelope inversion that generates artificial low-frequency information, which provides the possibility to recover long-wavelength structure in an early stage. In addition, the envelope-based global correlation norm maintains the advantage of the global correlation norm, which reduces the sensitivity of the misfit to amplitude errors so that the performance of inversion on real data can be enhanced when the exact source wavelet is not available and more complex physics are ignored. Through the synthetic example for 2-D SEG/EAGE overthrust model with inaccurate source wavelet, we compare the performance of four different approaches, which are the least-squares waveform inversion, least-squares envelope inversion, global correlation norm and envelope-based global correlation norm. Finally, we apply the envelope-based global correlation norm on the 3-D Ocean Bottom Cable (OBC) data from the North Sea. The envelope-based global correlation norm captures the strong reflections from the high-velocity caprock and generates artificial low-frequency reflection energy that helps us recover long-wavelength structure of the model domain in the early stages. From this long-wavelength model, the conventional global correlation norm is sequentially applied to invert for higher-resolution features of the model.
Full Scale Test of a SSP 34m box girder 1. Data report

DEFF Research Database (Denmark)

Jensen, Find Mølholt; Branner, Kim; Nielsen, Per Hørlyk

This report presents the setup and result of a full-scale test of a reinforced glass fibre/epoxy box girder used in 34m wind turbine blade. The tests were performed at the Blaest test facility in August 2006. The test is an important part of a research project established in cooperation between...... Risø DTU, the National Laboratory for Sustainable Energy at the Technical University of Denmark -, SSP-Technology A/S and Blaest (Blade test centre A/S) and it has been performed as a part of Find Mølholt Jensen‟s PhD study. This report contains the complete test data for the final test, in which...... the box girder was loaded until failure. A comprehensive description of the test setup is given. This report deals only with tests and results. There are no conclusions on the data in this report, but references are given to publications, where the data are used and compared with FEM etc. Various kinds...
Full-duplex optical communication system

Science.gov (United States)

Shay, Thomas M. (Inventor); Hazzard, David A. (Inventor); Horan, Stephen (Inventor); Payne, Jason A. (Inventor)

2004-01-01

A method of full-duplex electromagnetic communication wherein a pair of data modulation formats are selected for the forward and return data links respectively such that the forward data electro-magnetic beam serves as a carrier for the return data. A method of encoding optical information is used wherein right-hand and left-hand circular polarizations are assigned to optical information to represent binary states. An application for an earth to low earth orbit optical communications system is presented which implements the full-duplex communication and circular polarization keying modulation format.
Efficient Cooperative Protocols for Full-Duplex Relaying over Nakagami-m Fading Channels

KAUST Repository

Khafagy, Mohammad Galal

2015-02-24

In this work, efficient protocols are studied for full-duplex relaying (FDR) with loopback interference over Nakagami-m block fading channels. Recently, a selective decodeand- forward (DF) protocol was proposed for FDR, and was shown to outperform existing protocols in terms of outage over Rayleigh-fading channels. In this work, we propose an incremental selective DF protocol that offers additional power savings, yet yields the same outage performance. We evaluate their outage performance over independent non-identically distributed Nakagami-m fading links, and study their relative performance in terms of the signal-to-noise ratio cumulative distribution function via closed-form expressions. The offered diversity gain is also derived. In addition, we study their performance relative to their half-duplex counterparts, as well as known non-selective FDR protocols. We corroborate our theoretical results with simulation, and confirm that selective cooperation protocols outperform the known non-selective protocols in terms of outage. Finally, we show that depending on the loopback interference level, the proposed protocols can outperform their half-duplex counterparts when high spectral efficiencies are targeted.
Full scale vibration test on nuclear power plant auxiliary building: Part I

International Nuclear Information System (INIS)

Langer, V.; Tinic, S.; Berger, E.; Zwicky, P.; Prater, E.G.

1987-01-01

In connection with the construction of the reinforced concrete auxiliary building housing the two boric water tanks (so-called BOTA building) of the Beznau Nuclear Power Plant in Switzerland the opportunity was given to carry out full scale vibration tests in November 1985. The overall aim of the tests was to validate computational models and parameters widely used in the seismic analysis of the structures and critical components of nuclear power plants. The scope of the experimental investigation was the determination of the eigenfrequencies and damping values for the fundamental soil-structure interaction (SSI) modes. The excitation level was aimed to be as high as feasibly possible. A working group was formed of representatives of the owner, NOK, the consulting firm Basler and Hofmann and the ETH to supervise the project. The project's main phases were the planning and execution of the tests, the evaluation of recorded data, numerical simulation of the tests using different computer models and finally the comparison and interpretation of measured and computed results
Cartesian Mesh Linearized Euler Equations Solver for Aeroacoustic Problems around Full Aircraft

Directory of Open Access Journals (Sweden)

Yuma Fukushima

2015-01-01

Full Text Available The linearized Euler equations (LEEs solver for aeroacoustic problems has been developed on block-structured Cartesian mesh to address complex geometry. Taking advantage of the benefits of Cartesian mesh, we employ high-order schemes for spatial derivatives and for time integration. On the other hand, the difficulty of accommodating curved wall boundaries is addressed by the immersed boundary method. The resulting LEEs solver is robust to complex geometry and numerically efficient in a parallel environment. The accuracy and effectiveness of the present solver are validated by one-dimensional and three-dimensional test cases. Acoustic scattering around a sphere and noise propagation from the JT15D nacelle are computed. The results show good agreement with analytical, computational, and experimental results. Finally, noise propagation around fuselage-wing-nacelle configurations is computed as a practical example. The results show that the sound pressure level below the over-the-wing nacelle (OWN configuration is much lower than that of the conventional DLR-F6 aircraft configuration due to the shielding effect of the OWN configuration.
Sharing the Licensed Spectrum of Full-Duplex Systems using Improper Gaussian Signaling

KAUST Repository

Gaafar, Mohamed; Amin, Osama; Abediseid, Walid; Alouini, Mohamed-Slim

2016-01-01

Sharing the spectrum with in-band full-duplex (FD) primary users (PU) is a challenging and interesting problem in the underlay cognitive radio (CR) systems. The self-inteference introducsed at the primary network may dramatically impede the secondary user (SU) opportunity to access the spectrum. In this work, we attempt to tackle this problem through the use of so called improper Gaussian signaling (IGS). Such a signaling technique has demonstrated its superiority in improving the overall performance in interference limited networks. Particularly, we assume a system with a SU pair working in half-duplex mode that uses IGS while the FD PU pair implements the regular proper Gaussiam signaling techniques. Frist, we derive a closed form expression for the SU outage probability while maintaining the required PU quality-of-service based on the average channel state information. Finally, we provide some numerical results that validate the tightness of the PU outage probability bound and demonstrate the advantage of employing IGS to the SU in order to access the spectrum of the FD PU.
Efficient Cooperative Protocols for Full-Duplex Relaying over Nakagami-m Fading Channels

KAUST Repository

Khafagy, Mohammad Galal; Tammam, Amr; Alouini, Mohamed-Slim; Aissa, Sonia

2015-01-01

In this work, efficient protocols are studied for full-duplex relaying (FDR) with loopback interference over Nakagami-m block fading channels. Recently, a selective decodeand- forward (DF) protocol was proposed for FDR, and was shown to outperform existing protocols in terms of outage over Rayleigh-fading channels. In this work, we propose an incremental selective DF protocol that offers additional power savings, yet yields the same outage performance. We evaluate their outage performance over independent non-identically distributed Nakagami-m fading links, and study their relative performance in terms of the signal-to-noise ratio cumulative distribution function via closed-form expressions. The offered diversity gain is also derived. In addition, we study their performance relative to their half-duplex counterparts, as well as known non-selective FDR protocols. We corroborate our theoretical results with simulation, and confirm that selective cooperation protocols outperform the known non-selective protocols in terms of outage. Finally, we show that depending on the loopback interference level, the proposed protocols can outperform their half-duplex counterparts when high spectral efficiencies are targeted.
Sharing the Licensed Spectrum of Full-Duplex Systems using Improper Gaussian Signaling

KAUST Repository

Gaafar, Mohamed

2016-01-06

Sharing the spectrum with in-band full-duplex (FD) primary users (PU) is a challenging and interesting problem in the underlay cognitive radio (CR) systems. The self-inteference introducsed at the primary network may dramatically impede the secondary user (SU) opportunity to access the spectrum. In this work, we attempt to tackle this problem through the use of so called improper Gaussian signaling (IGS). Such a signaling technique has demonstrated its superiority in improving the overall performance in interference limited networks. Particularly, we assume a system with a SU pair working in half-duplex mode that uses IGS while the FD PU pair implements the regular proper Gaussiam signaling techniques. Frist, we derive a closed form expression for the SU outage probability while maintaining the required PU quality-of-service based on the average channel state information. Finally, we provide some numerical results that validate the tightness of the PU outage probability bound and demonstrate the advantage of employing IGS to the SU in order to access the spectrum of the FD PU.
A Biomimetic Approach for Designing a Full External Breast Prosthesis: Post-Mastectomy

Directory of Open Access Journals (Sweden)

Pedro Cruz

2018-03-01

Full Text Available This work presents the design of a new breast prosthesis using the biomimetic technique for cases of complete mastectomy to address the problem of the increasing number of women diagnosed with breast cancer in Mexico who are candidates for a mastectomy. The designed prosthesis considers the morphology of a real breast regarding its internal structure to obtain authentic mobility and feel. In order to accomplish this, a model was obtained in 3D CAD using a coordinate measuring machine (CMM that can be scalable without losing its qualities, and which can be used in any type of patient; afterwards, a finite element model was developed and a static analysis performed with suggested load cases to evaluate the sensitivity and naturalness of the prosthesis; and finally, a modal analysis was conducted. The results obtained in displacements and in distribution of stress for the load cases assessed are consistent with those of a real breast: there were smooth contours and there was natural mobility in the prosthesis designed by means of the biomimetic technique.
Numerical experiment for nonlinear full-wave tomography. 3; Hisenkei full wave tomography no suchi jikken

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, T [Dia Consultants Company, Tokyo (Japan)

1996-10-01

Nonlinear full-wave tomography (FWT) is under investigation to improve the estimation accuracy of Vp/Vs distributions. Full-wave tomography is one of the underground structure exploration methods mainly using Tarantola`s nonlinear local optimization method (LOM). Numerical experiment for FWT was carried out assuming relatively weak nonlinear underground structure. In the case of inversion by local optimization method, adequate preconditioning is important. Utilization of geological information is also effective in estimating low-frequency components of a model. As far as data are obtained under proper observation arrangement, even in actual field, precise estimation of Vp/Vs distributions is possible by FWT using explosion in a hole as wave source. In full-wave tomography, selection of observation arrangement is essential for both Vp and Vs. However, the proper arrangement is different between Vp and Vs. Approach to different analyses for Vp and Vs is also necessary by using only proper data for Vp and Vs among obtained data sets. 4 figs.
Fourier domain optical coherence tomography achieves full range complex imaging in vivo by introducing a carrier frequency during scanning

International Nuclear Information System (INIS)

Wang, Ruikang K

2007-01-01

The author describes a Fourier domain optical coherence tomography (FDOCT) system that is capable of full range complex imaging in vivo. This is achieved by introducing a constant carrier frequency into the OCT spectral interferograms at the time when imaging is performed. The complex functions of the spatial interferograms formed by each single wavelength are constructed before performing the Fourier transformation to localize the scatters within a sample. Two algorithms, based on Fourier filtering and Hilbert transformation, respectively, are described to achieve the full range complex FDOCT imaging. It is shown that the Hilbert transformation approach delivers better performance than the Fourier filtering method does in terms of tolerating the sample movement in vivo. The author finally demonstrates experimentally the system and algorithms for true in vivo imaging at a rate of 20 000 axial scans per second
48 CFR 49.112-2 - Final payment.

Science.gov (United States)

2010-10-01

... voucher or invoice and forward the documents to the disbursing officer for payment. (b) Settlement by...) Construction contracts. In the case of construction contracts, before forwarding the final payment voucher, the... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Final payment. 49.112-2...
10 CFR 455.155 - Finality of decision.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Finality of decision. 455.155 Section 455.155 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND BUILDINGS OWNED BY UNITS OF LOCAL GOVERNMENT AND PUBLIC CARE INSTITUTIONS Administrative Review § 455.155 Finality of...
Final Report for DUSEL R&D: BetaCage: A Screener of Ultra-Low-Level Radioactive Surface Contamination

Energy Technology Data Exchange (ETDEWEB)

Golwala, Sunil R. [California Institute of Technology

2013-12-20

The eventual full-size, radiopure BetaCage will be a low-background, atmospheric-pressure neon drift chamber with unprecedented sensitivity to emitters of low-energy electrons and alpha particles. We expect that the prototype BetaCage already developed will be an excellent screener of alpha particles. Both the prototype and final BetaCage will provide new infrastructure for rare-event science.
Full MOX core design in ABWR

International Nuclear Information System (INIS)

Ihara, Toshiteru; Mochida, Takaaki; Izutsu, Sadayuki; Fujimaki, Shingo

2003-01-01

Electric Power Development Co., Ltd. (EPDC) has been investigating an ABWR plant for construction at Oma-machi in Aomori Prefecture. The reactor, termed FULL MOX-ABWR will have its reactor core eventually loaded entirely with mixed-oxide (MOX) fuel. Extended use of MOX fuel in the plant is expected to play important roles in the country's nuclear fuel recycling policy. MOX fuel bundles will initially be loaded only to less than one-third of the reactor, but will be increased to cover its entire core eventually. The number of MOX fuel bundles in the core thus varies anywhere from 0 to 264 for the initial cycle and, 0 to 872 for equilibrium cycles. The safety design of the FULL MOX-ABWR briefly stated next considers any probable MOX loading combinations out of such MOX bundle usage scheme, starting from full UO 2 to full MOX cores. (author)

Prenatal sex and other preferences for reproductive career of final year graduation girl students

Directory of Open Access Journals (Sweden)

Yugantara R Kadam

2013-01-01

Full Text Available Background: Marriage of girls just after graduation is common in Western Maharashtra. This study was planned to know the views of final year graduation student towards reproductive carrier. Aim: To interact with final year girl students of various streams to know their preferences on various aspects of reproductive carrier and contraceptive awareness. Material and Methods: Study-design: Cross-sectional. Study-setting: Academic institutes of Sangli-Miraj-Kupwad Corporation area. Study-subject: All willing final year Girl students. Exclusion Criteria: Married girls. Sample size: All final year girl students Sampling Technique: Cluster sample Study-Duration: 7 months. Study-tool: Pretested questionnaire. Statistical Analysis: Percentages, Chi-square test. Results: All girls who have responded prefer marrying and having first child at right age. All feel spacing is needed, at least of 2 years. Two children was the most common choice (52.3%. Forty-three percent girls feel male child is must and 52.3% of total girls will like to have sex determination done if required. Total 47.24% girls were unaware about any contraceptive methods but 88.2% girls knew the place of its availability. Most common source of information about contraceptive was school and friends. E-pill was known to 41.5% of girls. All girls felt the need for more information about reproductive health and according to 81.3% right age for it is 15-18 years. Conclusion: Girls have correct reproductive preferences except sex of child. Sex preference and Low contraceptive awareness needs strong intervention.
Measurement of D0–D‾0 mixing and search for CP violation in D0→K+K−,π+π− decays with the full Belle data set

Directory of Open Access Journals (Sweden)

M. Starič

2016-02-01

Full Text Available We report an improved measurement of D0–D‾0 mixing and a search for CP violation in D0 decays to CP-even final states K+K− and π+π−. The measurement is based on the final Belle data sample of 976 fb−1. The results are yCP=(1.11±0.22±0.09% and AΓ=(−0.03±0.20±0.07%, where the first uncertainty is statistical and the second is systematic.
Diffractive dissociation into 3 pion final states at COMPASS

Energy Technology Data Exchange (ETDEWEB)

Chung, Suh-Urk [Technische Universitaet Muenchen, Physik Department E18, 85748 Garching (Germany); Brookhaven National Laboratory, Upton, NY 11973 (United States); Friedrich, Jan; Grabmueller, Stefanie; Haas, Florian; Ketzer, Bernhard; Neubert, Sebastian; Paul, Stephan; Weitzel, Quirin [Technische Universitaet Muenchen, Physik Department E18, 85748 Garching (Germany); Ryabchikov, Dimitry [Technische Universitaet Muenchen, Physik Department E18, 85748 Garching (Germany); Institute for High Energy Physics, 142284 Protvino (Russian Federation)

2009-07-01

Diffractive dissociation reactions at the COMPASS experiment, CERN, provide access to the meson resonance spectrum. During a pilot run in 2004, using a pion beam on a lead target, a competitive number of {pi}{sup -} {pi}{sup -} {pi}{sup +} final state events with masses below 2.5 GeV/c{sup 2} were recorded. After COMPASS had finished its muon program in 2007, it used in 2008 again a pion beam, but now a liquid hydrogen target, and gathered during several weeks a unique high statistics. A full partial wave analysis of the 2004 data has been performed, with the focus on the kinematic range of a large momentum transfer (0.1 GeV{sup 2}/c{sup 2} {<=} t' {<=} 1.0 GeV{sup 2}/c{sup 2}). In addition first results of the adjacent analysis with 2008 data are presented.
Estádio da meiose do micrósporo como marcador do final da endodormência em pessegueiro

Directory of Open Access Journals (Sweden)

CITADIN IDEMIR

2002-01-01

Full Text Available O objetivo deste trabalho foi testar a validade da técnica da meiose polínica como marcador do final da endodormência em pessegueiro, em condições de inverno subtropical. Determinou-se o número de unidades de calor (GDHºC - Growing Degree Hour Celsius acumulado desde 1º de maio até o final da meiose e desta até 10 e 50 % de florescimento. Foram efetuadas correlações entre tétrades + pólen versus GDHºC e tétrades + pólen versus número de horas de frio (temperaturas do ar £ 7,2 ºC, nas diferentes datas de observação compreendidas entre 1º de maio e final da meiose. Pelos resultados dos dois anos de observação, verificou-se que há necessidade de calor para que as células-mãe de pólen atinjam o estádio de tétrades. O método da meiose polínica mostrou-se inadequado como marcador do final da endodormência em pessegueiro.
MaxiFuels. Final report; Maxi-Fuels. Afslutningsrapport

Energy Technology Data Exchange (ETDEWEB)

2008-07-01

The MaxiFuel pilot plant opened September 2006 with a view to testing and developing a competitive integrated concept for 2nd generation bioethanol production from lignocellulosic biomass such as straw. This makes the raw material cheaper than crops cultivated for energy production purposes only, and the bioethanol production will not compete with production of food. The MaxiFuels concept is a patented technology which has proven in lab-scale to have the potential of producing bioethanol from residual biomass for a lower price than other existing 2nd generation bioethanol concepts. Lately a suitable pre-treatment process, Wet Explosion, has been developed, and enzymes and C6 fermentation based on yeast have been tested and further developed on pre-treated straw. Furthermore a special micro organism has been isolated, genetically engineered and tested on the pre-treated biomass. The micro organism converts C5 sugars to ethanol. Finally an attempt has been made to produce biogas from the remaining organic material, which can't be fermented to ethanol. All the abovementioned processes have been developed in lab-scale. The operation of these processes at the same time in one concept in pilot scale makes it possible to evaluate the concept's productivity in full-scale. The data of the pilot plant operation have been used for the set-up of an economical model of the whole concept. Based on this model a full-scale plant has been designed and a business plan for the implementation of this step has been elaborated. (BA)
Buffer management in wireless full-duplex systems

KAUST Repository

Bouacida, Nader

2015-10-19

Wireless full-duplex radios can simultaneously transmit and receive using the same frequency. In theory, this can double the throughput. In fact, there is only little work addressing aspects other than throughput gains in full-duplex systems. Over-buffering in today\\'s networks or the so-called “bufferbloat” phenomenon creates excessive end-to-end delays resulting in network performance degradation. Our analysis shows that full-duplex systems may suffer from high latency caused by bloated buffers. In this paper, we address the problem of buffer management in full-duplex networks by using Wireless Queue Management (WQM), which is an active queue management technique for wireless networks. Our solution is based on Relay Full-Duplex MAC (RFD-MAC), an asynchronous media access control protocol designed for relay full-duplexing. We compare the performance of WQM in full-duplex environment to Drop Tail mechanism over various scenarios. Our solution reduces the end-to-end delay by two orders of magnitude while achieving similar throughput in most of the cases.
Specified radioactive waste final disposal act

International Nuclear Information System (INIS)

Yasui, Masaya

2001-01-01

Radioactive wastes must be finally and safely disposed far from human activities. Disposal act is a long-range task and needs to be understood and accepted by public for site selection. This paper explains basic policy of Japanese Government for final disposal act of specified radioactive wastes, examination for site selection guidelines to promote residential understanding, general concept of multi-barrier system for isolating the specific radioactive wastes, and research and technical development for radioactive waste management. (S. Ohno)
Feasibility and Advantages of Full Thickness Skin Graft from the Anterolateral Thigh.

Science.gov (United States)

Shin, Seung-Han; Kim, Chulkyu; Lee, Yong-Suk; Kang, Jin-Woo; Chung, Yang-Guk

2017-12-01

Full thickness skin graft (FTSG) gives better outcomes than split thickness skin graft (STSG), but it has the drawback of limited donor sites. Anterolateral thigh (ALT), a popular donor site of STSG, is also a popular donor site of perforator flaps. This area has the advantage of large flap size available with primary closure. Based on this we harvested FTSG instead of STSG from the ALT. We retrospectively reviewed 10 cases of FTSG from the ALT, with the recipient site of foot in 3, ankle in 2, lower leg in 2, forearm in 2, and wrist in 1 patient. In all cases elliptical full thickness skin was harvested from the ALT, and the donor site was closed primarily. The skin was defatted and placed onto the defect with vacuum-assisted closure (VAC). The skin size ranged 7-30 cm in length and 3-12 cm in width. Mean follow up period was 7 months (range, 3-13). FTSG from the ALT provided durable wound coverage, with excellent color and texture matching. Partial (< 20%) graft failure was observed in 1 case, but no additional surgery was necessary. No patient reported donor site pain at postoperative 2 weeks. No donor site complications were encountered. No patient complained a feeling of tension in the thigh at final follow-up. FTSG from the ALT is feasible with the aid of VAC. Considering the skin quality, large skin size available, early pain relief, and little donor site morbidity, the ALT should be revisited as a donor site of FTSG.
Search for new phenomena in monophoton final states in proton–proton collisions at s=8 TeV

Directory of Open Access Journals (Sweden)

V. Khachatryan

2016-04-01

Full Text Available Results are presented from a search for new physics in final states containing a photon and missing transverse momentum. The data correspond to an integrated luminosity of 19.6 fb−1 collected in proton–proton collisions at s=8 TeV with the CMS experiment at the LHC. No deviation from the standard model predictions is observed for these final states. New, improved limits are set on dark matter production and on parameters of models with large extra dimensions. In particular, the first limits from the LHC on branon production are found and significantly extend previous limits from LEP and the Tevatron. An upper limit of 14.0 fb on the cross section is set at the 95% confidence level for events with a monophoton final state with photon transverse momentum greater than 145 GeV and missing transverse momentum greater than 140 GeV. Keywords: CMS, Physics, Monophoton, Dark matter
Temperatura base, plastocrono e número final de nós no malmequer-do-campo Base temperature, plastochron and final node number in yellow calendula

Directory of Open Access Journals (Sweden)

Joelma Dutra Fagundes

2008-12-01

Full Text Available O malmequer-do-campo (Aspilia montevidensis é uma planta herbácea perene, nativa do Sul e Sudeste do Brasil, cuja biologia tem sido pouco estudada. O objetivo deste trabalho foi determinar a temperatura base, o plastocrono e o número final de nós de A. montevidensis. Para tanto, foi conduzido um experimento em Santa Maria, RS, com seis épocas de cultivo (20/12/2005, 14/02/2006, 06/03/2006, 04/04/2006, 05/05/2006 e 08/06/2006 no delineamento inteiramente casualizado. A unidade experimental foi uma planta cultivada em vasos preenchidos com substrato comercial. O número de nós visíveis foi registrado na haste principal e nas hastes laterais de primeira e segunda ordem. A temperatura base de emissão de nós foi estimada pela metodologia do menor Quadrado Médio do Erro. A soma térmica diária foi calculada a partir do transplante e o plastocrono foi estimado para cada haste. A temperatura base estimada para emissão de nós de A. montevidensis foi de 0°C. O plastocrono e o número final de nós variam entre hastes e épocas de cultivo, com os menores valores de plastocrono e maiores valores de número final de nós observados na haste principal.Yellow calendula (Aspilia montevidensis is a perenium herbaceous plant native of South and Southeast Brazil that has been little studied about its biology. The objective of this study was to determine the base temperature, the plastochron and the final node number in A. montevidensis. An experiment was conducted in Santa Maria, RS, with six planting dates (12/20/2005, 02/14/2006, 03/06/2006, 04/04/2006, 05/05/2006 and 06/08/2006. The experimental design was completely randomized and the experimental unit was one plant grown in pots filled with commercial substratum. The number of visible nodes were measured on the maim stem and on first and second order lateral branches. The base temperature for node appearance was estimated with the mean square error approach. The daily thermal unit was calculated
Generating potentially nilpotent full sign patterns

NARCIS (Netherlands)

Kim, I.J.; Olesky, D.D.; Shader, B.L.; Driessche, van den P.; Holst, van der H.; Vander Meulen, K.N.

2009-01-01

A sign pattern is a matrix with entries in {+,-, 0}. A full sign pattern has no zero entries. The refined inertia of a matrix pattern is defined and techniques are developed for constructing potentially nilpotent full sign patterns. Such patterns are spectrally arbitrary. These techniques can also
MASTICATION, PHONETICS AND ESTHETICS AS A FINAL RESULT OF PARTIAL OR COMPLETE DENTURE TREATMENT.

Directory of Open Access Journals (Sweden)

Kalina Georgieva

2015-08-01

Full Text Available Three target groups- dentists/ dental students, dental technicians and patients were asked to fill in an anonymous questionnaire about their satisfaction of the final results after prosthetic treatment with removable dentures using a scale from 1 to 5 (1- completely dissatisfied, 2-dissatisfied, 3-indifferent, 4-satisfied, 5-completely satisfied. The mean results (including colour, shape and size of artificial teeth, arrangement of front teeth, colour of artificial gums, phonetics, mastication, natural smile, enough space for tongue for all three groups of respondents were compared. Dental technicians (4,34 are more satisfied than dentists/dental students (3,62 and patients (3,53. A successful outcome of prosthetic treatment depends on one hand on the professional approach of the dental team and on the other hand on the patient’s motivation and cooperation. The predictive final results and realistic expectations lead to satisfaction of all participants in the treatment process.
Biofuels cost developments in the EU27+ until 2030. Full-chain cost assessment and implications of policy options. REFUEL WP4 final report

International Nuclear Information System (INIS)

Londo, H.M.; Lensink, S.M.; Deurwaarder, E.P.; Wakker, A.; De Wit, M.; Junginger, M.; Koenighofer, K; Jungmeier, G.

2008-02-01

With the rapid developments in the biofuels domain comes the need for biofuel policies that spur their introduction in a responsible way. The REFUEL project, supported by the EU Intelligent Energy Europe programme, develops a road map for biofuels in the EU27+ up to 2030. This WP4 report shows the results of a full-chain analysis of the costs of different biofuels. Effects of different levels of biofuel target setting were analysed, and also the impact of different additional policy measures, such as the introduction of a CO2 pricing mechanism and specific subsidies
10 CFR 51.90 - Final environmental impact statement-general.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-general. 51.90... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.90 Final environmental impact statement—general. After receipt and consideration of comments requested pursuant to §§ 51...
Full faith in myself

Indian Academy of Sciences (India)

Lawrence

Full faith in myself. Meenakshi Banerjee. 12. Ihad my schooling at the Irish Convent, Loreto, in Asansol,. West Bengal. Perhaps the earliest memories I have are of myself as a very determined child with a deep appreciation of and inquisitiveness regarding nature although not understanding most of it at that tender age.
Minimum Value of Eligible Employer-Sponsored Plans and Other Rules Regarding the Health Insurance Premium Tax Credit. Final regulations.

Science.gov (United States)

2015-12-18

This document contains final regulations on the health insurance premium tax credit enacted by the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010, as amended by the Medicare and Medicaid Extenders Act of 2010, the Comprehensive 1099 Taxpayer Protection and Repayment of Exchange Subsidy Overpayments Act of 2011, and the Department of Defense and Full-Year Continuing Appropriations Act, 2011. These final regulations affect individuals who enroll in qualified health plans through Affordable Insurance Exchanges (Exchanges, sometimes called Marketplaces) and claim the health insurance premium tax credit, and Exchanges that make qualified health plans available to individuals and employers.
Analisis Pengaruh Redesign Transmisi dan Final Drive Gear Terhadap Karakteristik Traksi Honda New Jazz RS 2010 Untuk Kejuaraan Dragrace

Directory of Open Access Journals (Sweden)

I Putu Gede Jaya Laksana

2017-03-01

Full Text Available Catatan waktu adalah hal yang terpenting untuk menjadi juara pada kompetisi dragrace. Pada kelas bracket 10, kendaraan harus finish dengan waktu lebih dari 10 detik dan yang paling mendekati 10 detik akan menjadi pemenang. Untuk meraih itu, perlu dilakukan modifikasi sistem transmisi pada kendaraan, yaitu rasio transmisi dan final drive gear. Pada penelitian ini, pertama dilakukan pengujian dynotest untuk mendapatkan tenaga dan torsi aktual kendaraan. Tahapan kedua dilakukan pengolahan data secara aktual dan teoritis untuk setiap tingkatan transmisi dan rasio final drive gear. Kemudian analisa akhir merupakan komparatif studi antara karakteristik traksi desain baru sistem transmisi dengan parameter desain. Hasil analisa menunjukkan bahwa rasio final drive gear memiliki pengaruh proporsional terhadap karaktersitik traksi dari kendaraan New Honda Jazz. Pada penelitian ini dapat disimpulkan bahwa kendaraan Honda New Jazz RS 2010 diprediksi finish dengan catatan waktu 10,08 detik tanpa mengalami fenomena slip.
BEAVRS full core burnup calculation in hot full power condition by RMC code

International Nuclear Information System (INIS)

Liu, Shichang; Liang, Jingang; Wu, Qu; Guo, JuanJuan; Huang, Shanfang; Tang, Xiao; Li, Zeguang; Wang, Kan

2017-01-01

Highlights: • TMS and thermal scattering interpolation were developed to treat cross sections OTF. • Hybrid coupling system was developed for HFP burnup calculation of BEAVRS benchmark. • Domain decomposition was applied to handle memory problem of full core burnup. • Critical boron concentration with burnup by RMC agrees with the benchmark results. • RMC is capable of multi-physics coupling for simulations of nuclear reactors in HFP. - Abstract: Monte Carlo method can provide high fidelity neutronics analysis of different types of nuclear reactors, owing to its advantages of the flexible geometry modeling and the use of continuous-energy nuclear cross sections. However, nuclear reactors are complex systems with multi-physics interacting and coupling. MC codes can couple with depletion solver and thermal-hydraulics (T/H) codes simultaneously for the “transport-burnup-thermal-hydraulics” coupling calculations. MIT BEAVRS is a typical “transport-burnup-thermal-hydraulics” coupling benchmark. In this paper, RMC was coupled with sub-channel code COBRA, equipped with on-the-fly temperature-dependent cross section treatment and large-scale detailed burnup calculation based on domain decomposition. Then RMC was applied to the full core burnup calculations of BEAVRS benchmark in hot full power (HFP) condition. The numerical tests show that domain decomposition method can achieve the consistent results compared with original version of RMC while enlarging the computational burnup regions. The results of HFP by RMC agree well with the reference values of BEAVRS benchmark and also agree well with those of MC21. This work proves the feasibility and accuracy of RMC in multi-physics coupling and lifecycle simulations of nuclear reactors.
Full Kinetics from First Principles of the Chlorine Evolution Reaction over a RuO2 (110) Model Electrode.

Science.gov (United States)

Exner, Kai S; Anton, Josef; Jacob, Timo; Over, Herbert

2016-06-20

Current progress in modern electrocatalysis research is spurred by theory, frequently based on ab initio thermodynamics, where the stable reaction intermediates at the electrode surface are identified, while the actual energy barriers are ignored. This approach is popular in that a simple tool is available for searching for promising electrode materials. However, thermodynamics alone may be misleading to assess the catalytic activity of an electrochemical reaction as we exemplify with the chlorine evolution reaction (CER) over a RuO2 (110) model electrode. The full procedure is introduced, starting from the stable reaction intermediates, computing the energy barriers, and finally performing microkinetic simulations, all performed under the influence of the solvent and the electrode potential. Full kinetics from first-principles allows the rate-determining step in the CER to be identified and the experimentally observed change in the Tafel slope to be explained. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Comparison of tree types of models for the prediction of final academic achievement

Directory of Open Access Journals (Sweden)

Silvana Gasar

2002-12-01

Full Text Available For efficient prevention of inappropriate secondary school choices and by that academic failure, school counselors need a tool for the prediction of individual pupil's final academic achievements. Using data mining techniques on pupils' data base and expert modeling, we developed several models for the prediction of final academic achievement in an individual high school educational program. For data mining, we used statistical analyses, clustering and two machine learning methods: developing classification decision trees and hierarchical decision models. Using an expert system shell DEX, an expert system, based on a hierarchical multi-attribute decision model, was developed manually. All the models were validated and evaluated from the viewpoint of their applicability. The predictive accuracy of DEX models and decision trees was equal and very satisfying, as it reached the predictive accuracy of an experienced counselor. With respect on the efficiency and difficulties in developing models, and relatively rapid changing of our education system, we propose that decision trees are used in further development of predictive models.

Final treatment of liquid radioactive wastes

International Nuclear Information System (INIS)

Svolik, S.

2004-01-01

Final treatment of liquid radioactive wastes which are produced by 1 st and 2 nd bloc of the Mochovce NPP, prepares the NPP in its natural range. The purpose of the equipment is liquidation of wastes, which are formed at production. Wastes are warehoused in the building of active auxiliary plants in the present time, where are reservoirs in which they are deposited. Because they are already feeling and in 2006 year they should be filled definitely, it is necessary to treat them in that manner, so as they may be liquidated. Therefore the Board of directors of the Slovenske elektrarne has disposed about construction of final treatment of liquid radioactive wastes in the Mochovce NPP. Because of transport the wastes have to be treated in the locality of power plant. Technically, the final treatment of the wastes will be interconnected with building of active operation by bridges. These bridges will transport the wastes for treatment into processing centre
Analysis of collective defense in finals of 2012. Radivoj Korac Cup

Directory of Open Access Journals (Sweden)

Stanković Aleksandar

2013-01-01

Full Text Available The aim of this research was to determine and analyze use, the way of organization and successfulness of collective defense, as well as effects of use of specific defense types. In this case of study, empirically non experimental method and monitoring technique which enables research of technically tactical activities in basketball were used. The sample of research included eight basketball teams, competitors in finals of Radivoj Korac Cup, held in Nis in 2012. In the research seven games were analyzed - four quarterfinal games, two semifinal games and one finals game. The data was collected by the monitoring technique, and analysis of collective defense is done based on variables on which, organization and successfulness of collective defense depends on. Five general variables, seven that refers to the type of defense and five variables of defense activities were included in this analysis and the results of the survey were expressed with quantitative values. With data analysis, it was realized that the team that had higher percentage of general defense efficiency was winning the game. While watching the games an impression that, the players on outer positions were significantly contributing to the efficiency of defense was made, while inner positions players showed much less mobility in defense.
Paracrine and autocrine signals promoting full chondrogenic differentiation of a mesoblastic cell line.

Science.gov (United States)

Locker, Morgane; Kellermann, Odile; Boucquey, Marie; Khun, Huot; Huerre, Michel; Poliard, Anne

2004-01-01

The pluripotent mesoblastic C1 cell line was used under serum-free culture conditions to investigate how paracrine and autocrine signals cooperate to drive chondrogenesis. Sequential addition of two systemic hormones, dexamethasone and triiodothyronine, permits full chondrogenic differentiation. The cell intrinsic activation of the BMP signaling pathway and Sox9 expression occurring on mesoblastic condensation is insufficient for recruitment of the progenitors. Dexamethasone-dependent Sox9 upregulation is essential for chondrogenesis. Differentiation of lineage stem cells relies on cell autonomous regulations modulated by external signals. We used the pluripotent mesoblastic C1 cell line under serum-free culture conditions to investigate how paracrine and autocrine signals cooperate to induce differentiation of a precursor clone along the chondrogenic lineage. C1 cells, cultured as aggregates, were induced toward chondrogenesis by addition of 10(-7) M dexamethasone in serum-free medium. After 30 days, dexamethasone was replaced by 10 nM triiodothyronine to promote final hypertrophic conversion. Mature and hypertrophic phenotypes were characterized by immunocytochemistry using specific antibodies against types II and X collagens, respectively. Type II collagen, bone morphogenetic proteins (BMPs), BMP receptors, Smads, and Sox9 expression were monitored by reverse transcriptase-polymerase chain reaction (RT-PCR), Northern blot, and/or Western blot analysis. Once C1 cells have formed nodules, sequential addition of two systemic hormones is sufficient to promote full chondrogenic differentiation. In response to dexamethasone, nearly 100% of the C1 precursors engage in chondrogenesis and convert within 30 days into mature chondrocytes, which triggers a typical cartilage matrix. On day 25, a switch in type II procollagen mRNA splicing acted as a limiting step in the acquisition of the mature chondrocyte phenotype. On day 30, substitution of dexamethasone with
Layout-aware text extraction from full-text PDF of scientific articles

Directory of Open Access Journals (Sweden)

Ramakrishnan Cartic

2012-05-01

. Finally, we discuss preliminary error analysis for our system and identify further areas of improvement. Conclusions LA-PDFText is an open-source tool for accurately extracting text from full-text scientific articles. The release of the system is available at http://code.google.com/p/lapdftext/.
Full Life Cycle of Data Analysis with Climate Model Diagnostic Analyzer (CMDA)

Science.gov (United States)

Lee, S.; Zhai, C.; Pan, L.; Tang, B.; Zhang, J.; Bao, Q.; Malarout, N.

2017-12-01

We have developed a system that supports the full life cycle of a data analysis process, from data discovery, to data customization, to analysis, to reanalysis, to publication, and to reproduction. The system called Climate Model Diagnostic Analyzer (CMDA) is designed to demonstrate that the full life cycle of data analysis can be supported within one integrated system for climate model diagnostic evaluation with global observational and reanalysis datasets. CMDA has four subsystems that are highly integrated to support the analysis life cycle. Data System manages datasets used by CMDA analysis tools, Analysis System manages CMDA analysis tools which are all web services, Provenance System manages the meta data of CMDA datasets and the provenance of CMDA analysis history, and Recommendation System extracts knowledge from CMDA usage history and recommends datasets/analysis tools to users. These four subsystems are not only highly integrated but also easily expandable. New datasets can be easily added to Data System and scanned to be visible to the other subsystems. New analysis tools can be easily registered to be available in the Analysis System and Provenance System. With CMDA, a user can start a data analysis process by discovering datasets of relevance to their research topic using the Recommendation System. Next, the user can customize the discovered datasets for their scientific use (e.g. anomaly calculation, regridding, etc) with tools in the Analysis System. Next, the user can do their analysis with the tools (e.g. conditional sampling, time averaging, spatial averaging) in the Analysis System. Next, the user can reanalyze the datasets based on the previously stored analysis provenance in the Provenance System. Further, they can publish their analysis process and result to the Provenance System to share with other users. Finally, any user can reproduce the published analysis process and results. By supporting the full life cycle of climate data analysis
Search for heavy resonances decaying into the fully hadronic di-tau final state with the ATLAS detector

CERN Document Server

Morgenstern, Marcus Matthias

The discovery of a heavy neutral particle would be a direct hint for new physics beyond the Standard Model. In this thesis searches for new heavy neutral particles decaying into two tau leptons, which further decay into hadrons, are presented. They cover neutral Higgs bosons in the context of the minimal supersymmetric extension of the Standard Model (MSSM) as well as $Z'$ bosons, predicted by various theories with an extended gauge sector. Both analyses are based on the full 2012 proton-proton collision dataset taken by the ATLAS experiment at the Large Hadron Collider (LHC). The extended Higgs sector in the MSSM suggests additional heavy neutral Higgs bosons which decay into tau leptons in about 10\\% of the time. Given that the dominant final state, $\\phi\\to b\\bar{b}$, suffers from tremendous QCD initiated backgrounds, the decay into two tau leptons is the most promising final state to discover such new resonances. The fully hadronic final state is the dominant one with a branching fraction of about 42\\%. I...
The Weaknesses of Full-Text Searching

Science.gov (United States)

Beall, Jeffrey

2008-01-01

This paper provides a theoretical critique of the deficiencies of full-text searching in academic library databases. Because full-text searching relies on matching words in a search query with words in online resources, it is an inefficient method of finding information in a database. This matching fails to retrieve synonyms, and it also retrieves…
Academic Journal Embargoes and Full Text Databases.

Science.gov (United States)

Brooks, Sam

2003-01-01

Documents the reasons for embargoes of academic journals in full text databases (i.e., publisher-imposed delays on the availability of full text content) and provides insight regarding common misconceptions. Tables present data on selected journals covering a cross-section of subjects and publishers and comparing two full text business databases.…
The case for full practice authority.

Science.gov (United States)

Holmes, Olivia; Kinsey-Weathers, Shanieka

2016-03-01

The Institute of Medicine (IOM) recommended in its 2010 report on the future of nursing that advanced practice registered nurses (APRNs) should factor prominently in providing care to the millions of Americans who access healthcare services under the Affordable Care Act (ACA). The IOM also recommended that APRNs practice to the full extent of their education and training.However, many states have laws in place that limit full practice authority for APRNs, specifically NPs, in providing basic health services such as primary care. These laws place restrictions on independent practice and Medicaid and Medicare reimbursement, which prevent nurses from “responding effectively to rapidly changing health care settings and an evolving health care system.” Less than half of the United States has adopted full practice authority licensure and practice laws (see APRN practice authority at a glance). This article discusses how the primary care needs of millions of Americans can be met by granting full practice authority to APRNs nationwide and provides evidence to support the high level of care these practitioners can provide independently.
Characters of neutron noise in full-size molten salt reactor

International Nuclear Information System (INIS)

Wang, Jiangmeng; Cao, Xinrong

2015-01-01

Highlights: • The larger system size makes full-size MSR deviate from point kinetic behavior. • The increasing velocity has non-monotonic effect on the effective delayed neutron fraction. • The amplitude of Green’s function at low frequencies is inversely proportional to the effective delayed neutron fraction. • The range of plateau region is smaller due to the more prominent point kinetic effect. - Abstract: In the present paper, the frequency-dependent and space-dependent behavior of the neutron noise in a full-size Molten Salt Reactor (MSR) is investigated. The theoretical models considering the fuel circulation are established based on one-group neutron diffusion theory. Green’s function of the neutron noise induced by a propagating perturbation is introduced with linear noise theory, due to the small perturbation. The equations are numerically calculated by developing a code, in which the eigenfunction expansion method is adopted. The static results show that the effective delayed neutron fraction changes non-monotonically with the increasing fuel velocity. In the dynamic case, the results are compared to those obtained in 1D MSR and a traditional reactor, in order to figure out the effects of both the fuel circulation and the system size. It is found that there is no difference in 1D and 3D MSR systems from the view of fuel circulation, i.e., the fuel circulation enhances the spatial neutronic coupling and leads to the stronger point kinetic effect. The more prominent space-dependent effect founded in 3D traditional reactors is also observed in the MSR, due to the looser neutronic coupling and the unique singularity of Green’s function in the location of the perturbation. Another interesting finding is that Green’s function for low frequencies changes non-monotonically with increasing velocity. The largest magnitude of Green’s function is observed at the velocity where the effective delayed neutron fraction reaches its minimum. Finally, the
Full-Carpet Design of a Low-Boom Demonstrator Concept

Science.gov (United States)

Ordaz, Irian; Wintzer, Mathias; Rallabhandi, Sriram K.

2015-01-01

The Cart3D adjoint-based design framework is used to mitigate the undesirable o -track sonic boom properties of a demonstrator concept designed for low-boom directly under the flight path. First, the requirements of a Cart3D design mesh are determined using a high-fidelity mesh adapted to minimize the discretization error of the CFD analysis. Low-boom equivalent area targets are then generated at the under-track and one off-track azimuthal position for the baseline configuration. The under-track target is generated using a trim- feasible low-boom target generation process, ensuring that the final design is not only low-boom, but also trimmed at the specified flight condition. The o -track equivalent area target is generated by minimizing the A-weighted loudness using an efficient adjoint-based approach. The configuration outer mold line is then parameterized and optimized to match the off-body pressure distributions prescribed by the low-boom targets. The numerical optimizer uses design gradients which are calculated using the Cart3D adjoint- based design capability. Optimization constraints are placed on the geometry to satisfy structural feasibility. The low-boom properties of the final design are verified using the adaptive meshing approach. This analysis quantifies the error associated with the CFD mesh that is used for design. Finally, an alternate mesh construction and target positioning approach offering greater computational efficiency is demonstrated and verified.
Analysis of expressed sequence tags generated from full-length enriched cDNA libraries of melon

Directory of Open Access Journals (Sweden)

Bendahmane Abdelhafid

2011-05-01

Full Text Available Abstract Background Melon (Cucumis melo, an economically important vegetable crop, belongs to the Cucurbitaceae family which includes several other important crops such as watermelon, cucumber, and pumpkin. It has served as a model system for sex determination and vascular biology studies. However, genomic resources currently available for melon are limited. Result We constructed eleven full-length enriched and four standard cDNA libraries from fruits, flowers, leaves, roots, cotyledons, and calluses of four different melon genotypes, and generated 71,577 and 22,179 ESTs from full-length enriched and standard cDNA libraries, respectively. These ESTs, together with ~35,000 ESTs available in public domains, were assembled into 24,444 unigenes, which were extensively annotated by comparing their sequences to different protein and functional domain databases, assigning them Gene Ontology (GO terms, and mapping them onto metabolic pathways. Comparative analysis of melon unigenes and other plant genomes revealed that 75% to 85% of melon unigenes had homologs in other dicot plants, while approximately 70% had homologs in monocot plants. The analysis also identified 6,972 gene families that were conserved across dicot and monocot plants, and 181, 1,192, and 220 gene families specific to fleshy fruit-bearing plants, the Cucurbitaceae family, and melon, respectively. Digital expression analysis identified a total of 175 tissue-specific genes, which provides a valuable gene sequence resource for future genomics and functional studies. Furthermore, we identified 4,068 simple sequence repeats (SSRs and 3,073 single nucleotide polymorphisms (SNPs in the melon EST collection. Finally, we obtained a total of 1,382 melon full-length transcripts through the analysis of full-length enriched cDNA clones that were sequenced from both ends. Analysis of these full-length transcripts indicated that sizes of melon 5' and 3' UTRs were similar to those of tomato, but
The 'final order' problem

NARCIS (Netherlands)

Teunter, RH; Haneveld, WKK

1998-01-01

When the service department of a company selling machines stops producing and supplying spare parts for certain machines, customers are offered an opportunity to place a so-called final order for these spare parts. We focus on one customer with one machine. The customer plans to use this machine up
MATERIALS FOR THE FINAL COVER OF SANITARY LANDFILLS

OpenAIRE

Davorin Kovačić

1994-01-01

The paper deals with the selection of materials for the sea¬ling layer in the final cover of sanitary landfills. The sealing la¬yer is the most critical component of the final cover. Its role is to minimize percolation of water through the final cover. Ma¬terials used for the construction of the sealing layer are either of mineral origin (compacted clay) or geosynthetic (geomem¬brane). They are most often used in combination creating com¬posite liners. Recently alternative materials are also ...
HINTS Puerto Rico: Final Report

Science.gov (United States)

This final report describes HINTS implementation in Puerto Rico. The report addresses sampling; staffing, training and management of data collection; calling protocol; findings from the CATI Operations, and sample weights.
Summary report on close-coupled subsurface barrier technology: Initial field trials to full-scale demonstration

International Nuclear Information System (INIS)

Heiser, J.H.

1997-09-01

The primary objective of this project was to develop and demonstrate the installation and measure the performance of a close-coupled barrier for the containment of subsurface waste or contaminant migration. A close-coupled barrier is produced by first installing a conventional, low-cost, cement-grout containment barrier followed by a thin lining of a polymer grout. The resultant barrier is a cement-polymer composite that has economic benefits derived from the cement and performance benefits from the durable and resistant polymer layer. The technology has matured from a regulatory investigation of the issues concerning the use of polymers to laboratory compatibility and performance measurements of various polymer systems to a pilot-scale, single column injection at Sandia to full-scale demonstration. The feasibility of the close-coupled barrier concept was proven in a full-scale cold demonstration at Hanford, Washington and then moved to the final stage with a full-scale demonstration at an actual remediation site at Brookhaven National Laboratory (BNL). At the Hanford demonstration the composite barrier was emplaced around and beneath a 20,000 liter tank. The secondary cement layer was constructed using conventional jet grouting techniques. Drilling was completed at a 45 degree angle to the ground, forming a cone-shaped barrier. The primary barrier was placed by panel jet-grouting with a dual-wall drill stem using a two part polymer grout. The polymer chosen was a high molecular weight acrylic. At the BNL demonstration a V-trough barrier was installed using a conventional cement grout for the secondary layer and an acrylic-gel polymer for the primary layer. Construction techniques were identical to the Hanford installation. This report summarizes the technology development from pilot- to full-scale demonstrations and presents some of the performance and quality achievements attained
Bevalac injector final stage RF amplifier upgrades

International Nuclear Information System (INIS)

Howard, D.; Calvert, J.; Dwinell, R.; Lax, J.; Lindner, A.; Richter, R.; Ridgeway, W.

1991-01-01

With the assistance of the DOE In-house Energy Management Program, the Bevalac injector final stage RF amplifier systems have been successfully upgraded to reduce energy consumption and operating costs. This recently completed project removed the energy-inefficient plate voltage modulator circuits that were used in conjunction with the final stage RF amplifiers. Construction, design, and operating parameters are described in detail
Full-fledged temporal processing: bridging the gap between deep linguistic processing and temporal extraction

Directory of Open Access Journals (Sweden)

Francisco Costa

2013-07-01

Full Text Available The full-fledged processing of temporal information presents specific challenges. These difficulties largely stem from the fact that the temporal meaning conveyed by grammatical means interacts with many extra-linguistic factors (world knowledge, causality, calendar systems, reasoning. This article proposes a novel approach to this problem, based on a hybrid strategy that explores the complementarity of the symbolic and probabilistic methods. A specialized temporal extraction system is combined with a deep linguistic processing grammar. The temporal extraction system extracts eventualities, times and dates mentioned in text, and also temporal relations between them, in line with the tasks of the recent TempEval challenges; and uses machine learning techniques to draw from different sources of information (grammatical and extra-grammatical even if it is not explicitly known how these combine to produce the final temporal meaning being expressed. In turn, the deep computational grammar delivers richer truth-conditional meaning representations of input sentences, which include a principled representation of temporal information, on which higher level tasks, including reasoning, can be based. These deep semantic representations are extended and improved according to the output of the aforementioned temporal extraction module. The prototype implemented shows performance results that increase the quality of the temporal meaning representations and are better than the performance of each of the two components in isolation.
Sanitary landfill in situ bioremediation optimization test. Final report

International Nuclear Information System (INIS)

1996-01-01

This work was performed as part of a corrective action plan for the Savannah River Site Sanitary Landfill. This work was performed for the Westinghouse Savannah River Company Environmental Restoration Department as part of final implementation of a groundwater remediation system for the SRS Sanitary Landfill. Primary regulatory surveillance was provided by the South Carolina Department of Health and Environmental Control and the US Environmental Protection Agency (Region IV). The characterization, monitoring and remediation systems in the program generally consisted of a combination of innovative and baseline methods to allow comparison and evaluation. The results of these studies will be used to provide input for the full-scale groundwater remediation system for the SRS Sanitary Landfill. This report summarizes the performance of the Sanitary Landfill In Situ Optimization Test data, an evaluation of applicability, conclusions, recommendations, and related information for implementation of this remediation technology at the SRS Sanitary Landfill
Infant Discrimination of a Morphologically Relevant Word-Final Contrast

Science.gov (United States)

Fais, Laurel; Kajikawa, Sachiyo; Amano, Shigeaki; Werker, Janet F.

2009-01-01

Six-, 12-, and 18-month-old English-hearing infants were tested on their ability to discriminate nonword forms ending in the final stop consonants /k/ and /t/ from their counterparts with final /s/ added, resulting in final clusters /ks/ and /ts/, in a habituation-dishabituation, looking time paradigm. Infants at all 3 ages demonstrated an ability…

Convention on nuclear safety. Final act

International Nuclear Information System (INIS)

1994-01-01

The Diplomatic Conference, which was convened by the International Atomic Energy Agency at its Headquarters from 14 to 17 June 1994, adopted the Convention on Nuclear Safety reproduced in document INFCIRC/449 and the Final Act of the Conference. The text of the Final Act of the Conference, including an annexed document entitled ''Some clarification with respect to procedural and financial arrangements, national reports, and the conduct of review meetings, envisaged in the Convention on Nuclear Safety'', is reproduced in the Attachment hereto for the information of all Member States
Paying the full cost of power : an indicative comparative analysis of residential electricity rates across Canadian provinces

International Nuclear Information System (INIS)

Goulding, A.J.; Sabatier, G.

2005-01-01

This study was commissioned to review electricity rates charged to residential consumers across Canada and to determine how the basics of ratemaking change from province to province. Rates in each province vary significantly due to differences in the industry structure and their resource base. It was noted that direct comparisons are difficult because some rates reflect the financing, fuel and opportunity costs of power. For that reason, a simple adjustment factor was developed for fair comparison between jurisdictions. This assessment compared the all-in cost to final consumers which includes power generation, transmission, distribution and all other charges, as calculated by Statistics Canada. It was revealed that Alberta is Canada's only province where prices to final consumers reflect the market value of the underlying commodity. Ratepayers have the advantage of not being responsible for bad investment choices in the power sector and there are no hidden subsidies due to provincial ownership of power resources. Another consumer advantage is that they receive appropriate price signals in terms of energy consumption and conservation. This report suggests that low electricity rates in other provinces can be expected to rise much more rapidly than those in Alberta in the coming decade as consumers may be charged the full value of the electricity they use. 18 refs., 9 figs
Exterior insulating shutter final prototype design. Final report, Phase II

Energy Technology Data Exchange (ETDEWEB)

Dike, G.A.; Kinney, L.F.

1982-12-01

The final prototype shutter described uses sliding panels composed of inch-thick thermax sandwiched between 60 mil thick ultraviolet-resistant plastic on the outside, and 20 mil stryrene on the inside. The shuter system was shown to have an effective R-value of 6 using ASHRAE procedures to convert from still air conditions to 15 mph wind conditions in a simulated cold environment. Tests were performed for cyclical operation, vulnerability to ice and wind, thermal performance, and air infiltration. Marketing efforts are described. Cost effectiveness is determined via present value analysis. (LEW)
Regional final energy consumptions

International Nuclear Information System (INIS)

2011-01-01

This report comments the differences observed between the French regions and also between these regions and national data in terms of final energy consumption per inhabitant, per GDP unit, and per sector (housing and office building, transport, industry, agriculture). It also comments the evolutions during the last decades, identifies the most recent trends
Linear growth and final height characteristics in adolescent females with anorexia nervosa.

Directory of Open Access Journals (Sweden)

Dalit Modan-Moses

Full Text Available OBJECTIVE: Growth retardation is an established complication of anorexia nervosa (AN. However, findings concerning final height of AN patients are inconsistent. The aim of this study was to assess these phenomena in female adolescent inpatients with AN. METHODS: We retrospectively studied all 211 female adolescent AN patients hospitalized in an inpatient eating disorders department from 1/1/1987 to 31/12/99. Height and weight were assessed at admission and thereafter routinely during hospitalization and follow-up. Final height was measured in 69 patients 2-10 years after discharge. Pre-morbid height data was available in 29 patients. RESULTS: Patients' height standard deviation scores (SDS on admission (-0.285±1.0 and discharge (-0.271±1.02 were significantly (p<0.001 lower than expected in normal adolescents. Patients admitted at age ≤13 years, or less than 1 year after menarche, were more severely growth-impaired than patients admitted at an older age, (p = 0.03. Final height SDS, available for 69 patients, was -0.258±1.04, significantly lower than expected in a normal population (p = 0.04, and was more severely compromised in patients who were admitted less than 1 year from their menarche. In a subgroup of 29 patients with complete growth data (pre-morbid, admission, discharge, and final adult height, the pre-morbid height SDS was not significantly different from the expected (-0.11±1.1, whereas heights at the other time points were significantly (p = 0.001 lower (-0.56±1.2, -0.52±1.2, and -0.6±1.2, respectively. CONCLUSIONS: Our findings suggest that whereas the premorbid height of female adolescent AN patients is normal, linear growth retardation is a prominent feature of their illness. Weight restoration is associated with catch-up growth, but complete catch-up is often not achieved.
Efficiency of final irrigation of root canal in removal of smear layer

Directory of Open Access Journals (Sweden)

Mitić Aleksandar

2009-01-01

Full Text Available Introduction A smear layer forms on the root canal walls as the consequence of root instrumentation. The smear layer formed in such a way considerably influences the quality of root obturation and endodontic treatment outcome. Objective The aim of this study was to ultrastructurally analyze the surface of intracanal dentine after removal of the smear layer by the solution of doxycycline, citric acid and detergent Tween-80 (MTAD. Methods The study involved 60 single-rooted, extracted, human teeth divided into four groups. All samples were instrumented by a step-back technique and manual K-files, and rinsed during instrumentation by 2% CHX and H2O2. The first group of samples was exclusively rinsed by CHX and H2O2; in the second group, besides using CHX and H2O2, MTAD solution was used for the final irrigation. The samples which were rinsed by distilled water (+ control and the samples rinsed by 5.25% NaOCl and 17% Na EDTA (-control served as control groups. All samples were observed under the scanning electronic microscope JEOL-JSM-5300. The coronary, middle and apex thirds of the radix region were analyzed. Results The obtained results of the SEM analysis showed that the application of 2% chlorhexidine and hydrogen peroxide did not give clear dentine walls, and the smear layer could not be removed completely. The application of the same combination (CHX and H2O2, added by the final MTAD irrigation solution, led to the efficient removal of the smear layer, while the morphological structure of dentine surface remained unchanged. Statistical analysis showed that canal walls in the experimental group with MTAD as the final irrigation were significantly clearer compared to the control group (p<0.001. Conclusion Based on the obtained results, it can be concluded that MTAD is an efficient solution for the final irrigation of the canal system.
Ground Combat Training Squadron Complex Final Environmental Assessment

Science.gov (United States)

2011-08-01

Squadron E nvironm ental A ssessm ent Page 1-6 Eglin A ir Force Base, FL Final Figure 1-2. R esources N ot C arried Forw ard for D etailed A...Base, FL Final Figure 3-1. W ater R esources w ithin or near the Proposed A ction or A lternative L ocations Legend c::J Project Sites 1 00...bat T raining Squadron E nvironm ental A ssessm ent Page 3-14 Eglin A ir Force Base, FL Final Figure 3-3. B iological R esources w ithin or
Design of an improved RCD buffer circuit for full bridge circuit

Science.gov (United States)

Yang, Wenyan; Wei, Xueye; Du, Yongbo; Hu, Liang; Zhang, Liwei; Zhang, Ou

2017-05-01

In the full bridge inverter circuit, when the switch tube suddenly opened or closed, the inductor current changes rapidly. Due to the existence of parasitic inductance of the main circuit. Therefore, the surge voltage between drain and source of the switch tube can be generated, which will have an impact on the switch and the output voltage. In order to ab sorb the surge voltage. An improve RCD buffer circuit is proposed in the paper. The peak energy will be absorbed through the buffer capacitor of the circuit. The part energy feedback to the power supply, another part release through the resistor in the form of heat, and the circuit can absorb the voltage spikes. This paper analyzes the process of the improved RCD snubber circuit, According to the specific parameters of the main circuit, a reasonable formula for calculating the resistance capacitance is given. A simulation model will be modulated in Multisim, which compared the waveform of tube voltage and the output waveform of the circuit without snubber circuit with the improved RCD snubber circuit. By comparing and analyzing, it is proved that the improved buffer circuit can absorb surge voltage. Finally, experiments are demonstrated to validate that the correctness of the RC formula and the improved RCD snubber circuit.
Measurement of WW and WZ production in the lepton plus heavy flavor jets final state at CDF

Energy Technology Data Exchange (ETDEWEB)

Leone, Sandra [Fermilab

2016-11-16

We present the CDF measurement of the diboson WW and WZ production cross section in a final state consistent with leptonic W decay and jets originating from heavy flavor quarks, based on the full Tevatron Run II dataset. The analysis of the di–jet invariant mass spectrum allows the observation of 3.7 sigma evidence for the combined production processes of either WW or WZ bosons. The different heavy flavor decay pattern of the W and Z bosons and the analysis of the secondary–decay vertex properties allow to independently measure the WW and WZ production cross section in a hadronic final state. The measured cross sections are consistent with the standard model predictions and correspond to signal significances of 2.9 and 2.1 sigma for WW and WZ production, respectively.
Final report

Energy Technology Data Exchange (ETDEWEB)

Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2017-02-07

This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.
78 FR 9054 - Issuance of Final Guidance Publication

Science.gov (United States)

2013-02-07

... NIOSH-144] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety and... Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The National Institute...), announces the availability of the following publication: ``NIOSH Criteria for a Recommended Standard...
78 FR 25454 - Issuance of Final Guidance Publication

Science.gov (United States)

2013-05-01

... NIOSH-161-A] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety... Human Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The National...), announces the availability of the following publication: ``NIOSH Current Intelligence Bulletin 65...
77 FR 74194 - Issuance of Final Guidance Publication

Science.gov (United States)

2012-12-13

... NIOSH-238] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety and... Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The National Institute...), announces the availability of the following publication: NIOSH Alert entitled ``Preventing Occupational...
78 FR 66936 - Issuance of Final Guidance Publication

Science.gov (United States)

2013-11-07

... NIOSH-156] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety and... Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The National Institute...), announces the availability of the following publication: ``Current Intelligence Bulletin 66--Derivation of...
Analysis of temperatures during the firing bricks and final properties solid

Directory of Open Access Journals (Sweden)

Gustavo Guerrero Gómez

2017-01-01

Full Text Available Context: Since the estructural behavior of the walls in a building directly depends on the properties of the blocks used, these properties are very important. In particular, the final properties of a ceramic block (often used in masonry depend on the cooking temperature of the pulp. Objective: The purpose of this research is to determine the relationship between the final properties of a ceramic block and the temperature at which it was cooked. Additionally, it is wroth considering how quickly these temperatures vary in the kiln. Method: In first place, a system based on Labview was used to record the temperatures in the oven. In second place, it was considered the temperature increasing rate according to the ideal curve for baking blocks, which was classified inside the oven. In third place, samples of the product were taken according to the technical norms NTC 4017 and NTC 4205 in order to determine the properties of the block. Results: According to the samples, we determined: the Initial absorption of water (TIA, the absorption rate at 24 hours of immersion, the compressive strength, and the Modulus of Rupture (MR. Additionally, applying a multiple linear regression analysis, it was found a relationship between the TIA, the temperature increase rate, and the MR. Conclusions: From the results in the research, it is possible to conclude that: blocks baked at more than 1000 °C have the highest modulus of rupture (1.54 MPa; however, it was found that blocks baked at lower temperature presented the highest initial absorption rate (0.37 gr/cm2/min and the best compressive strength (7.28 MPa. Finally, since the temperature and time are not controlled during the baking process, it is difficult for properties to be the most suitable.
Comparison of biometric predictability and final refraction expected in phacoemulsification surgery with and without trabeculectomy

Directory of Open Access Journals (Sweden)

Fernanda Guedes Oliveira

Full Text Available Abstract Objective: The main purpose of this article is to compare the predictability of biometric results and final refractive outcomes expected in patients undergoing cataract surgery through phacoemulsification with and without associated trabeculectomy. Methods: Cataract patients who have undergone phacoemulsification surgery alone (control group or associated with trabeculectomy (study group screened. All surgeries were performed following standard protocol. For enrollment, biometrics calculated by IOL Master (Carl Zeiss Meditec, Inc. biometry, refraction and intraocular pressure (IOP before and after surgery were required. Data was compared between groups in addition to the correlation between variation of IOP and final refraction. Results: Thirty eyes per group were enrolled. Only prior IOP (p <0.001, IOP post-surgery (p = 0.01 and the difference in IOP (p <0.001 were statistically significant. Axial length, IOL diopter used, expected spherical refraction by biometrics and astigmatism pre- and post-surgery were similar in both groups (p=0.1; 0.4; 0.4; 0.5 and 0.3, respectively. Spherical predictability by biometrics within 0.25 diopters was noted in both the control group (range 0.06 ± 0.45 and study group (range 0.25 ± 0.97, p = 0.3. There was no statistical significance between groups for the difference between final cylinder and corneal astigmatism (p = 0.9, and the difference between axis of refractive and corneal astigmatism (p = 0.7. Conclusion: The biometric predictability in phacoemulsification surgery and the expected final refraction are significant, andare not modified by trabeculectomy in the combined surgeries.
Full-frame, programmable hyperspectral imager

Science.gov (United States)

Love, Steven P.; Graff, David L.

2017-07-25

A programmable, many-band spectral imager based on addressable spatial light modulators (ASLMs), such as micro-mirror-, micro-shutter- or liquid-crystal arrays, is described. Capable of collecting at once, without scanning, a complete two-dimensional spatial image with ASLM spectral processing applied simultaneously to the entire image, the invention employs optical assemblies wherein light from all image points is forced to impinge at the same angle onto the dispersing element, eliminating interplay between spatial position and wavelength. This is achieved, as examples, using telecentric optics to image light at the required constant angle, or with micro-optical array structures, such as micro-lens- or capillary arrays, that aim the light on a pixel-by-pixel basis. Light of a given wavelength then emerges from the disperser at the same angle for all image points, is collected at a unique location for simultaneous manipulation by the ASLM, then recombined with other wavelengths to form a final spectrally-processed image.
Emergency building temperature restrictions. Final evaluation

Energy Technology Data Exchange (ETDEWEB)

None

1980-11-01

On July 5, 1979, DOE promulgated final regulations of the Emergency Building Temperature Restrictions program, placing emergency restrictions on thermostat settings for space heating, space cooling, and hot water in commercial, industrial, and nonresidential public buildings. The final regulations restricted space heating to a maximum of 65/sup 0/F, hot water temperature to a maximum of 105/sup 0/F, and cooling temperature to a minimum of 78/sup 0/F. A comprehensive evaluation of the entire EBTF program for a nine-month period from July 16, 1979 is presented. In Chapter 1, an estimate of the population of buildings covered by EBTR is presented. In Chapter 2, EBTR compliance by building type and region is reported. Exemptions are also discussed. In Chapter 3, the simulations of building energy use are explained and the relative impact of various building characteristics and effectiveness of different control strategies are estimated. Finally, in Chapter 4, the methodology for scaling the individual building energy savings to the national level is described, and estimated national energy savings are presented.
MARKETING RELATIONSHIP AND TRADING IN THE RELATIONSHIP BETWEEN SERVICE PROVIDERS, HEALTH OPERATORS AND FINAL CUSTOMER: THE SEARCH FOR AN INTEGRATING MODEL

Directory of Open Access Journals (Sweden)

Nilda Catalina, Tañski

2012-01-01

Full Text Available The marketing relationship finds similarities with the concept of cooperative bargaining, the purpose of this is to find solutions to mutual gains with long-term vision. Within this approach, we sought to build an integrative model of relationship marketing and negotiation in the relationship between service providers, health operators and final customers in the health plan market in Brazil, this relationship is complex, full of conflicts and stagnation. It was first used, first, as an exploratory research of direct observation of the phenomenon referred to relationship marketing, trading and health insurance to increase employment opportunities. Then, the method of data collection was in that environment through online questionnaires using the survey method, in the representative sector. The type of sample used, where n = 217 and the confidence level was 95%, not intentional probabilistic. In the final, it was concluded that the initially proposed model was fully accepted, taking into account the choice of methodology, then achieving the main objective of this study.
16 CFR 700.8 - Warrantor's decision as final.

Science.gov (United States)

2010-01-01

... jurisdiction over suits for breach of warranty and service contract. ... decision as final. A warrantor shall not indicate in any written warranty or service contract either... party is final or binding in any dispute concerning the warranty or service contract. Nor shall a...

76 FR 22106 - Issuance of Final Guidance Publication

Science.gov (United States)

2011-04-20

... NIOSH-033] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety and... Health and Human Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The... (CDC) announces the availability of the following publication: NIOSH Current Intelligence Bulletin 63...
78 FR 78963 - Issuance of Final Guidance Publication

Science.gov (United States)

2013-12-27

... CDC-2013-0001, NIOSH 134-B] Issuance of Final Guidance Publication AGENCY: National Institute for... Health and Human Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The... Prevention (CDC), announces the availability of the following publication: ``Protecting the Nanotechnology...
Submission of the First Full Scale Prototype Chip for Upgraded ATLAS Pixel Detector at LHC, FE-I4A

CERN Document Server

Barbero, M; The ATLAS collaboration; Beccherle, R; Darbo, G; Dube, S; Elledge, D; Fleury, J; Fougeron, D; Garcia-Sciveres, M; Gensolen, F; Gnani, D; Gromov, V; Jensen, F; Hemperek, T; Karagounis, M; Kluit, R; Kruth, A; Mekkaoui, A; Menouni, M; Schipper, JD; Wermes, N; Zivkovic, V

2010-01-01

A new ATLAS pixel chip FE-I4 is being developed for use in upgraded LHC luminosity environments, including the near-term Insertable B-Layer (IBL) upgrade. FE-I4 is designed in a 130nm CMOS technology, presenting advantages in terms of radiation tolerance and digital logic density compared to the 250nm CMOS technology used for the current ATLAS pixel IC, FE-I3. The FE-I4 architecture is based on an array of 80x336 pixels, each 50x250um^2, consisting of analog and digital sections. In the summer 2010, a first full scale prototype FE-I4A was submitted for an engineering run. This IC features the full scale pixel array as well as the complex periphery of the future full-size FE-I4. The FE-I4A contains also various extra test features which should prove very useful for the chip characterization, but deviate from the needs for standard operation of the final FE-I4 for IBL. In this paper, focus will be brought to the various features implemented in the FE-I4A submission, while also underlining the main differences b...
Prototype performance studies of a Full Mesh ATCA-based General Purpose Data Processing Board

CERN Document Server

Okumura, Yasuyuki; Liu, Tiehui Ted; Yin, Hang

2013-01-01

High luminosity conditions at the LHC pose many unique challenges for potential silicon based track trigger systems. One of the major challenges is data formatting, where hits from thousands of silicon modules must first be shared and organized into overlapping eta-phi trigger towers. Communication between nodes requires high bandwidth, low latency, and flexible real time data sharing, for which a full mesh backplane is a natural solution. A custom Advanced Telecommunications Computing Architecture data processing board is designed with the goal of creating a scalable architecture abundant in flexible, non-blocking, high bandwidth board to board communication channels while keeping the design as simple as possible. We have performed the first prototype board testing and our first attempt at designing the prototype system has proven to be successful. Leveraging the experience we gained through designing, building and testing the prototype board system we are in the final stages of laying out the next generatio...
Sharing the Licensed Spectrum of Full-Duplex Systems Using Improper Gaussian Signaling

KAUST Repository

Gaafar, Mohamed

2015-12-01

Sharing the spectrum with in-band full-duplex (FD) primary users (PU) is a challenging and interesting problem in the underlay cognitive radio (CR) systems. The self-interference introduced at the primary network may dramatically impede the secondary user (SU) opportunity to access the spectrum. In this work, we attempt to tackle this problem through the use of the so-called improper Gaussian signaling. Such a signaling technique has demonstrated its superiority in improving the overall performance in interference limited networks. Particularly, we assume a system with a SU pair working in half-duplex mode that uses improper Gaussian signaling while the FD PU pair implements the regular proper Gaussian signaling techniques. First, we derive a closed form expression for the SU outage probability and an upper bound for the PU outage probability. Then, we optimize the SU signal parameters to minimize its outage probability while maintaining the required PU quality-of-service based on the average channel state information. Finally, we provide some numerical results that validate the tightness of the PU outage probability bound and demonstrate the advantage of employing the improper Gaussian signaling to the SU in order to access the spectrum of the FD PU.
Application of the Hybrid Simulation Method for the Full-Scale Precast Reinforced Concrete Shear Wall Structure

Directory of Open Access Journals (Sweden)

Zaixian Chen

2018-02-01

Full Text Available The hybrid simulation (HS testing method combines physical test and numerical simulation, and provides a viable alternative to evaluate the structural seismic performance. Most studies focused on the accuracy, stability and reliability of the HS method in the small-scale tests. It is a challenge to evaluate the seismic performance of a twelve-story pre-cast reinforced concrete shear-wall structure using this HS method which takes the full-scale bottom three-story structural model as the physical substructure and the elastic non-linear model as the numerical substructure. This paper employs an equivalent force control (EFC method with implicit integration algorithm to deal with the numerical integration of the equation of motion (EOM and the control of the loading device. Because of the arrangement of the test model, an elastic non-linear numerical model is used to simulate the numerical substructure. And non-subdivision strategy for the displacement inflection point of numerical substructure is used to easily realize the simulation of the numerical substructure and thus reduce the measured error. The parameters of the EFC method are calculated basing on analytical and numerical studies and used to the actual full-scale HS test. Finally, the accuracy and feasibility of the EFC-based HS method is verified experimentally through the substructure HS tests of the pre-cast reinforced concrete shear-wall structure model. And the testing results of the descending stage can be conveniently obtained from the EFC-based HS method.
Decisiones al final de la vida en el ordenamiento jurídico español

Directory of Open Access Journals (Sweden)

David Larios Risco

2012-12-01

Full Text Available El proceso de toma de decisiones clínicas se torna especialmente complejo durante las últimas fases de las enfermedades irreversibles o terminales. Cuando la decisión del paciente implica un ataque a la propia vida, la autonomía de la voluntad de la persona puede colisionar con el criterio médico o con los límites que impone el Ordenamiento Jurídico. El artículo aborda las diferentes figuras jurídicas em el proceso de toma de decisiones al final de la vida, diferenciando entre las admitidas por la ley (limitación del esfuerzo terapéutico, rechazo al tratamiento, sedación en la agonía y voluntades anticipadas y las prohibidas (auxilio al suicidio y eutanasia com el objetivo de ofrecer una aproximación al régimen jurídico de las decisiones al final de la vida en el ordenamiento jurídico español.
Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.

Energy Technology Data Exchange (ETDEWEB)

Quarles, Stephen, L.; Sindelar, Melissa

2011-12-13

The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.
Reconstruction of constitutive parameters in isotropic linear elasticity from noisy full-field measurements

International Nuclear Information System (INIS)

Bal, Guillaume; Bellis, Cédric; Imperiale, Sébastien; Monard, François

2014-01-01

Within the framework of linear elasticity we assume the availability of internal full-field measurements of the continuum deformations of a non-homogeneous isotropic solid. The aim is the quantitative reconstruction of the associated moduli. A simple gradient system for the sought constitutive parameters is derived algebraically from the momentum equation, whose coefficients are expressed in terms of the measured displacement fields and their spatial derivatives. Direct integration of this system is discussed to finally demonstrate the inexpediency of such an approach when dealing with noisy data. Upon using polluted measurements, an alternative variational formulation is deployed to invert for the physical parameters. Analysis of this latter inversion procedure provides existence and uniqueness results while the reconstruction stability with respect to the measurements is investigated. As the inversion procedure requires differentiating the measurements twice, a numerical differentiation scheme based on an ad hoc regularization then allows an optimally stable reconstruction of the sought moduli. Numerical results are included to illustrate and assess the performance of the overall approach. (paper)
Full-reference quality assessment of stereoscopic images by learning binocular receptive field properties.

Science.gov (United States)

Shao, Feng; Li, Kemeng; Lin, Weisi; Jiang, Gangyi; Yu, Mei; Dai, Qionghai

2015-10-01

Quality assessment of 3D images encounters more challenges than its 2D counterparts. Directly applying 2D image quality metrics is not the solution. In this paper, we propose a new full-reference quality assessment for stereoscopic images by learning binocular receptive field properties to be more in line with human visual perception. To be more specific, in the training phase, we learn a multiscale dictionary from the training database, so that the latent structure of images can be represented as a set of basis vectors. In the quality estimation phase, we compute sparse feature similarity index based on the estimated sparse coefficient vectors by considering their phase difference and amplitude difference, and compute global luminance similarity index by considering luminance changes. The final quality score is obtained by incorporating binocular combination based on sparse energy and sparse complexity. Experimental results on five public 3D image quality assessment databases demonstrate that in comparison with the most related existing methods, the devised algorithm achieves high consistency with subjective assessment.
Plate Full of Color

Centers for Disease Control (CDC) Podcasts

The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Plate Full of Color teaches the value of eating a variety of colorful and healthy foods.
Mask locations in the SLC final focus region

International Nuclear Information System (INIS)

Cence, R.J.

1983-01-01

The location of four sets of masks needed to shield against background in the final focus region of the SLC is shown. The main point of this note is to update the results of Miller and Sens taking into account the recent changes that have been made in the optics of the SLC beams. For the latest beam design we use the TRANSPORT output dated 5-13-83. This design assumes that the final bends will form an S about the interaction point and that the final quadrupoles will be superconducting and will be placed about 8 feet from the interaction point
Health insurance premium tax credit. Final regulations.

Science.gov (United States)

2013-02-01

This document contains final regulations relating to the health insurance premium tax credit enacted by the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010.These final regulations provide guidance to individuals related to employees who may enroll in eligible employer-sponsored coverage and who wish to enroll in qualified health plans through Affordable Insurance Exchanges (Exchanges) and claim the premium tax credit.
Frequent Questions about the Hazardous Waste Export-Import Revisions Final Rule

Science.gov (United States)

Answers questions such as: What new requirements did EPA finalize in the Hazardous Waste Export-Import Revisions Final Rule? Why did EPA implement these changes now? What are the benefits of the final rule? What are the compliance dates for the final rule?
10 CFR 51.94 - Requirement to consider final environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Requirement to consider final environmental impact...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.94 Requirement to consider final environmental impact statement. The final environmental impact statement...
Emptiness and Fullness

DEFF Research Database (Denmark)

Bregnbæk, Susanne; Bunkenborg, Mikkel

As critical voices question the quality, authenticity, and value of people, goods, and words in post-Mao China, accusations of emptiness render things open to new investments of meaning, substance, and value. Exploring the production of lack and desire through fine-grained ethnography, this volume...... examines how diagnoses of emptiness operate in a range of very different domains in contemporary China: In the ostensibly meritocratic exam system and the rhetoric of officials, in underground churches, housing bubbles, and nationalist fantasies, in bodies possessed by spirits and evaluations of jade......, there is a pervasive concern with states of lack and emptiness and the contributions suggest that this play of emptiness and fullness is crucial to ongoing constructions of quality, value, and subjectivity in China....
CERTIFICATION - The final and critical stage of every civil or military aviation program

Directory of Open Access Journals (Sweden)

Vasile STEFAN

2012-06-01

Full Text Available As a general rule the final step in every aviation program is the certification of the airplane, an important step in which the airplane, the engins and the equipments are checked by an authority or commission according to the airworthiness rules. The main scope of the certification is to promote a safe aviation product and to protect the general public from unnecessary risk. In all the contries the national authorieties require a civil certificability for all the parts or equipments and a full aircraft certification for a new or wholly modified airplane. The military aircrafts must pased and respond to a specific way of certification and many actual efforts are done in order to unify the diffrent national rules in this field. This paper presents the existing situation in the certification of civil and military airplans and the actual measures done for the unification of certification procedures in the world.
Final environmental statement for La Crosse Boiling Water Reactor: (Docket No. 50-409)

International Nuclear Information System (INIS)

1980-04-01

A Final Environmental Statement for the Dairyland Power Cooperative for the conversion from a provisional to a full-term operating license for the La Crosse Boiling Water Reactor, located in Vernon County, Wisconsin, has been prepared by the Office of Nuclear Reactor Regulation. This statement provides a summary of environmental impacts and adverse effects of operation of the facility, and a consideration of principal alternatives (including removal of LACBWR from service, alternative cooling methodology, and alternative waste treatment systems). Also included are the comments of federal, state, and local governmental agencies and certain non-governmental organizations on the La Crosse Draft Environmental Statement and staff responses to these comments. After weighing environmental, economic, and technical benefits and liabilities, the staff recommends conversion from a provisional operating license to a full-term operating license, subject to specific environmental protection limitations. An operational monitoring program shall be established as part of the Environmental Technical Specifications. 64 refs., 20 figs., 48 tabs
Conceptual design and the simulation of final cooling section for a muon collider

International Nuclear Information System (INIS)

Skrinsky, A.N.; Zolkin, T.V.

2009-01-01

The scheme of final cooling for muon beams, based on using current-carrying liquid-lithium rods, is discussed. The dynamics of particles in the course of cooling taking into account the non-paraxial motion has been studied with the help of computer simulation. It is suggested to minimize the effective increase of the longitudinal emittance caused by fluctuations of ionization losses and large angular spread, by the rotation of the longitudinal phase-space portrait for arranging self-action. We have considered the non-dissipative multiple successive full emittance redistribution from the longitudinal dimension to transverse one, necessary for cooling of all degrees of freedom. This redistribution is based on special rotations of the particle six-dimensional phase space by the beam division in several streams and their consequent merging with the minimum increment of full emittance and minimal beam losses taking into account their local phase-space density. Some of the basic technical parameters of the cooling system elements have been estimated.
Caspase 3 inactivates biologically active full length interleukin-33 as a classical cytokine but does not prohibit nuclear translocation

International Nuclear Information System (INIS)

Ali, Shafaqat; Nguyen, Dang Quan; Falk, Werner; Martin, Michael Uwe

2010-01-01

IL-33 is a member of the IL-1 family of cytokines with dual function which either activates cells via the IL-33 receptor in a paracrine fashion or translocates to the nucleus to regulate gene transcription in an intracrine manner. We show that full length murine IL-33 is active as a cytokine and that it is not processed by caspase 1 to mature IL-33 but instead cleaved by caspase 3 at aa175 to yield two products which are both unable to bind to the IL-33 receptor. Full length IL-33 and its N-terminal caspase 3 breakdown product, however, translocate to the nucleus. Finally, bioactive IL-33 is not released by cells constitutively or after activation. This suggests that IL-33 is not a classical cytokine but exerts its function in the nucleus of intact cells and only activates others cells via its receptor as an alarm mediator after destruction of the producing cell.

23 CFR 140.609 - Progress and final vouchers.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Progress and final vouchers. 140.609 Section 140.609 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PAYMENT PROCEDURES REIMBURSEMENT Reimbursement for Bond Issue Projects § 140.609 Progress and final vouchers. (a) Progress vouchers may be...
16 CFR 1.85 - Final environmental impact statements.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Final environmental impact statements. 1.85... Final environmental impact statements. (a) After the close of the comment period, the Bureau responsible for the matter will consider the comments received on the draft environmental impact statement and...
Medicaid program; health care-related taxes. Final rule.

Science.gov (United States)

2009-06-30

This rule finalizes our proposal to delay enforcement of certain clarifications regarding standards for determining hold harmless arrangements in the final rule entitled, "Medicaid Program; Health Care-Related Taxes" from the expiration of a Congressional moratorium on enforcement from July 1, 2009 to June 30, 2010.
Smart roadside initiative : final report.

Science.gov (United States)

2015-09-01

This is the Final Report for the Smart Roadside Initiative (SRI) prototype system deployment project. The SRI prototype was implemented at weigh stations in Grass Lake, Michigan and West Friendship, Maryland. The prototype was developed to integrate ...
First experiences of full-profile analysis with GUISDAP

Directory of Open Access Journals (Sweden)

M. S. Lehtinen

Full Text Available In this paper we summarize the theory behind full-profile analysis of IS measurements and report first practical experiences with the GUISDAP (Grand Unified Incoherent Scatter Design and Analysis Package system designed to perform full-profile analysis of any IS measurements efficiently. By fitting whole plasma parameter profiles over the ionosphere, instead of point values of the parameters supposed to be approximately constant over small range intervals, full-profile analysis is free of underlying assumptions about the slow variation of the plasma parameters as a function of range. We define full-profile analysis as a mathematical inversion problem formalism and explain how it differs from the traditional gated analysis. Moreover, we study the bias introduced to traditional analysis results using realistic model ionospheres. By applying the full-profile method to data generated from the model ionospheres, we demonstrate that full-profile analysis is free from this kind of bias. Lastly, an example of analysis of real data by full-profile and gated analyses is shown.
First experiences of full-profile analysis with GUISDAP

Directory of Open Access Journals (Sweden)

M. S. Lehtinen

1996-12-01

Full Text Available In this paper we summarize the theory behind full-profile analysis of IS measurements and report first practical experiences with the GUISDAP (Grand Unified Incoherent Scatter Design and Analysis Package system designed to perform full-profile analysis of any IS measurements efficiently. By fitting whole plasma parameter profiles over the ionosphere, instead of point values of the parameters supposed to be approximately constant over small range intervals, full-profile analysis is free of underlying assumptions about the slow variation of the plasma parameters as a function of range. We define full-profile analysis as a mathematical inversion problem formalism and explain how it differs from the traditional gated analysis. Moreover, we study the bias introduced to traditional analysis results using realistic model ionospheres. By applying the full-profile method to data generated from the model ionospheres, we demonstrate that full-profile analysis is free from this kind of bias. Lastly, an example of analysis of real data by full-profile and gated analyses is shown.
Precision measurement of the top-quark mass in lepton+jets final states

CERN Document Server

Abazov, Victor Mukhamedovich; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Agnew, James P; Alexeev, Guennadi D; Alkhazov, Georgiy D; Alton, Andrew K; Askew, Andrew Warren; Atkins, Scott; Augsten, Kamil; Avila, Carlos A; Badaud, Frederique; Bagby, Linda F; Baldin, Boris; Bandurin, Dmitry V; Banerjee, Sunanda; Barberis, Emanuela; Baringer, Philip S; Bartlett, JFrederick; Bassler, Ursula Rita; Bazterra, Victor; Bean, Alice L; Begalli, Marcia; Bellantoni, Leo; Beri, Suman B; Bernardi, Gregorio; Bernhard, Ralf Patrick; Bertram, Iain A; Besancon, Marc; Beuselinck, Raymond; Bhat, Pushpalatha C; Bhatia, Sudeep; Bhatnagar, Vipin; Blazey, Gerald Charles; Blessing, Susan K; Bloom, Kenneth A; Boehnlein, Amber S; Boline, Daniel Dooley; Boos, Edward E; Borissov, Guennadi; Borysova, Maryna; Brandt, Andrew; Brandt, Oleg; Brock, Raymond L; Bross, Alan D; Brown, Duncan Paul; Bu, Xue-Bing; Buehler, Marc; Buescher, Volker; Bunichev, Viacheslav Yevgenyevich; Burdin, Sergey; Buszello, Claus Peter; Camacho-Perez, Enrique; Casey, Brendan Cameron Kieran; Castilla-Valdez, Heriberto; Caughron, Seth Aaron; Chakrabarti, Subhendu; Chan, Kwok Ming Leo; Chandra, Avdhesh; Chapon, Emilien; Chen, Guo; Cho, Sung-Woong; Choi, Suyong; Choudhary, Brajesh C; Cihangir, Selcuk; Claes, Daniel R; Clutter, Justace Randall; Cooke, Michael P; Cooper, William Edward; Corcoran, Marjorie D; Couderc, Fabrice; Cousinou, Marie-Claude; Cutts, David; Das, Amitabha; Davies, Gavin John; de Jong, Sijbrand Jan; De La Cruz-Burelo, Eduard; Deliot, Frederic; Demina, Regina; Denisov, Dmitri S; Denisov, Sergei P; Desai, Satish Vijay; Deterre, Cecile; DeVaughan, Kayle Otis; Diehl, HThomas; Diesburg, Michael; Ding, Pengfei; Dominguez, DAaron M; Dubey, Abhinav Kumar; Dudko, Lev V; Duperrin, Arnaud; Dutt, Suneel; Eads, Michael T; Edmunds, Daniel L; Ellison, John A; Elvira, VDaniel; Enari, Yuji; Evans, Harold G; Evdokimov, Valeri N; Faure, Alexandre; Feng, Lei; Ferbel, Thomas; Fiedler, Frank; Filthaut, Frank; Fisher, Wade Cameron; Fisk, HEugene; Fortner, Michael R; Fox, Harald; Fuess, Stuart C; Garbincius, Peter H; Garcia-Bellido, Aran; Garcia-Gonzalez, Jose Andres; Gavrilov, Vladimir B; Geng, Weigang; Gerber, Cecilia Elena; Gershtein, Yuri S; Ginther, George E; Gogota, Olga; Golovanov, Georgy Anatolievich; Grannis, Paul D; Greder, Sebastien; Greenlee, Herbert B; Grenier, Gerald Jean; Gris, Phillipe Luc; Grivaz, Jean-Francois; Grohsjean, Alexander; Gruenendahl, Stefan; Gruenewald, Martin Werner; Guillemin, Thibault; Gutierrez, Gaston R; Gutierrez, Phillip; Haley, Joseph Glenn Biddle; Han, Liang; Harder, Kristian; Harel, Amnon; Hauptman, John Michael; Hays, Jonathan M; Head, Tim; Hebbeker, Thomas; Hedin, David R; Hegab, Hatim; Heinson, Ann; Heintz, Ulrich; Hensel, Carsten; Heredia-De La Cruz, Ivan; Herner, Kenneth Richard; Hesketh, Gavin G; Hildreth, Michael D; Hirosky, Robert James; Hoang, Trang; Hobbs, John D; Hoeneisen, Bruce; Hogan, Julie; Hohlfeld, Mark; Holzbauer, Jenny Lyn; Howley, Ian James; Hubacek, Zdenek; Hynek, Vlastislav; Iashvili, Ia; Ilchenko, Yuriy; Illingworth, Robert A; Ito, Albert S; Jabeen, Shabnam; Jaffre, Michel J; Jayasinghe, Ayesh; Jeong, Min-Soo; Jesik, Richard L; Jiang, Peng; Johns, Kenneth Arthur; Johnson, Emily; Johnson, Marvin E; Jonckheere, Alan M; Jonsson, Per Martin; Joshi, Jyoti; Jung, Andreas Werner; Juste, Aurelio; Kajfasz, Eric; Karmanov, Dmitriy Y; Katsanos, Ioannis; Kaur, Manbir; Kehoe, Robert Leo Patrick; Kermiche, Smain; Khalatyan, Norayr; Khanov, Alexander; Kharchilava, Avto; Kharzheev, Yuri N; Kiselevich, Ivan Lvovich; Kohli, Jatinder M; Kozelov, Alexander V; Kraus, James Alexander; Kumar, Ashish; Kupco, Alexander; Kurca, Tibor; Kuzmin, Valentin Alexandrovich; Lammers, Sabine Wedam; Lebrun, Patrice; Lee, Hyeon-Seung; Lee, Seh-Wook; Lee, William M; Lei, Xiaowen; Lellouch, Jeremie; Li, Dikai; Li, Hengne; Li, Liang; Li, Qi-Zhong; Lim, Jeong Ku; Lincoln, Donald W; Linnemann, James Thomas; Lipaev, Vladimir V; Lipton, Ronald J; Liu, Huanzhao; Liu, Yanwen; Lobodenko, Alexandre; Lokajicek, Milos; Lopes de Sa, Rafael; Luna-Garcia, Rene; Lyon, Adam Leonard; Maciel, Arthur KA; Madar, Romain; Magana-Villalba, Ricardo; Malik, Sudhir; Malyshev, Vladimir L; Mansour, Jason; Martinez-Ortega, Jorge; McCarthy, Robert L; Mcgivern, Carrie Lynne; Meijer, Melvin M; Melnitchouk, Alexander S; Menezes, Diego D; Mercadante, Pedro Galli; Merkin, Mikhail M; Meyer, Arnd; Meyer, Jorg Manfred; Miconi, Florian; Mondal, Naba K; Mulhearn, Michael James; Nagy, Elemer; Narain, Meenakshi; Nayyar, Ruchika; Neal, Homer A; Negret, Juan Pablo; Neustroev, Petr V; Nguyen, Huong Thi; Nunnemann, Thomas P; Hernandez Orduna, Jose de Jesus; Osman, Nicolas Ahmed; Osta, Jyotsna; Pal, Arnab; Parashar, Neeti; Parihar, Vivek; Park, Sung Keun; Partridge, Richard A; Parua, Nirmalya; Patwa, Abid; Penning, Bjoern; Perfilov, Maxim Anatolyevich; Peters, Reinhild Yvonne Fatima; Petridis, Konstantinos; Petrillo, Gianluca; Petroff, Pierre; Pleier, Marc-Andre; Podstavkov, Vladimir M; Popov, Alexey V; Prewitt, Michelle; Price, Darren; Prokopenko, Nikolay N; Qian, Jianming; Quadt, Arnulf; Quinn, Gene Breese; Ratoff, Peter N; Razumov, Ivan A; Ripp-Baudot, Isabelle; Rizatdinova, Flera; Rominsky, Mandy Kathleen; Ross, Anthony; Royon, Christophe; Rubinov, Paul Michael; Ruchti, Randal C; Sajot, Gerard; Sanchez-Hernandez, Alberto; Sanders, Michiel P; Santos, Angelo Souza; Savage, David G; Savitskyi, Mykola; Sawyer, HLee; Scanlon, Timothy P; Schamberger, RDean; Scheglov, Yury A; Schellman, Heidi M; Schwanenberger, Christian; Schwienhorst, Reinhard H; Sekaric, Jadranka; Severini, Horst; Shabalina, Elizaveta K; Shary, Viacheslav V; Shaw, Savanna; Shchukin, Andrey A; Simak, Vladislav J; Skubic, Patrick Louis; Slattery, Paul F; Smirnov, Dmitri V; Snow, Gregory R; Snow, Joel Mark; Snyder, Scott Stuart; Soldner-Rembold, Stefan; Sonnenschein, Lars; Soustruznik, Karel; Stark, Jan; Stoyanova, Dina A; Strauss, Michael G; Suter, Louise; Svoisky, Peter V; Titov, Maxim; Tokmenin, Valeriy V; Tsai, Yun-Tse; Tsybychev, Dmitri; Tuchming, Boris; Tully, Christopher George T; Uvarov, Lev; Uvarov, Sergey L; Uzunyan, Sergey A; Van Kooten, Richard J; van Leeuwen, Willem M; Varelas, Nikos; Varnes, Erich W; Vasilyev, Igor A; Verkheev, Alexander Yurievich; Vertogradov, Leonid S; Verzocchi, Marco; Vesterinen, Mika; Vilanova, Didier; Vokac, Petr; Wahl, Horst D; Wang, Michael HLS; Warchol, Jadwiga; Watts, Gordon Thomas; Wayne, Mitchell R; Weichert, Jonas; Welty-Rieger, Leah Christine; Williams, Mark Richard James; Wilson, Graham Wallace; Wobisch, Markus; Wood, Darien Robert; Wyatt, Terence R; Xie, Yunhe; Yamada, Ryuji; Yang, Siqi; Yasuda, Takahiro; Yatsunenko, Yuriy A; Ye, Wanyu; Ye, Zhenyu; Yin, Hang; Yip, Kin; Youn, Sungwoo; Yu, Jiaming; Zennamo, Joseph; Zhao, Tianqi Gilbert; Zhou, Bing; Zhu, Junjie; Zielinski, Marek; Zieminska, Daria; Zivkovic, Lidija

2015-06-04

We measure the mass of the top quark in lepton$+$jets final states using the full sample of $p\\bar{p}$ collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at $\\sqrt s=1.96 $TeV, corresponding to $9.7 {\\rm fb}^{-1}$ of integrated luminosity. We use a matrix element technique that calculates the probabilities for each event to result from $t\\bar t$ production or background. The overall jet energy scale is constrained in situ by the mass of the $W$ boson. We measure $m_t=174.98\\pm0.76$ GeV. This constitutes the most precise single measurement of the top-quark mass.
The Final Stage of Gravitationally Collapsed Thick Matter Layers

Directory of Open Access Journals (Sweden)

Piero Nicolini

2013-01-01

Full Text Available In the presence of a minimal length, physical objects cannot collapse to an infinite density, singular, matter point. In this paper, we consider the possible final stage of the gravitational collapse of “thick” matter layers. The energy momentum tensor we choose to model these shell-like objects is a proper modification of the source for “noncommutative geometry inspired,” regular black holes. By using higher momenta of Gaussian distribution to localize matter at finite distance from the origin, we obtain new solutions of the Einstein equation which smoothly interpolates between Minkowski’s geometry near the center of the shell and Schwarzschild’s spacetime far away from the matter layer. The metric is curvature singularity free. Black hole type solutions exist only for “heavy” shells; that is, M ≥Me, where Me is the mass of the extremal configuration. We determine the Hawking temperature and a modified area law taking into account the extended nature of the source.
arXiv Final results of the OPERA experiment on $\

CERN Document Server

Agafonova, N.; Anokhina, A.; Aoki, S.; Ariga, A.; Ariga, T.; Bertolin, A.; Bozza, C.; Brugnera, R.; Buonaura, A.; Buontempo, S.; Chernyavskiy, M.; Chukanov, A.; Consiglio, L.; D'Ambrosio, N.; De Lellis, G.; De Serio, M.; del Amo Sanchez, P.; Di Crescenzo, A.; Di Ferdinando, D.; Di Marco, N.; Dmitrievsky, S.; Dracos, M.; Duchesneau, D.; Dusini, S.; Dzhatdoev, T.; Ebert, J.; Ereditato, A.; Favier, J.; Fini, R.A.; Fornari, F.; Fukuda, T.; Galati, G.; Garfagnini, A.; Gentile, V.; Goldberg, J.; Gornushkin, Y.; Gorbunov, S.; Grella, G.; Guler, A.M.; Gustavino, C.; Hagner, C.; Hara, T.; Hayakawa, T.; Hollnagel, A.; Ishiguro, K.; Iuliano, A.; Jakovcic, K.; Jollet, C.; Kamiscioglu, C.; Kamiscioglu, M.; Kim, S.H.; Kitagawa, N.; Klicek, B.; Kodama, K.; Komatsu, M.; Kose, U.; Kreslo, I.; Laudisio, F.; Lauria, A.; Ljubicic, A.; Longhin, A.; Loverre, P.; Malgin, A.; Malenica, M.; Mandrioli, G.; Matsuo, T.; Matveev, V.; Mauri, N.; Medinaceli, E.; Meregaglia, A.; Mikado, S.; Miyanishi, M.; Mizutani, F.; Monacelli, P.; Montesi, M.C.; Morishima, K.; Muciaccia, M.T.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakano, T.; Niwa, K.; Okateva, N.; Olchevsky, A.; Ogawa, S.; Ozaki, K.; Paoloni, A.; Paparella, L.; Park, B.D.; Pasqualini, L.; Pastore, A.; Patrizii, L.; Pessard, H.; Pistillo, C.; Podgrudkov, D.; Polukhina, N.; Pozzato, M.; Pupilli, F.; Roda, M.; Roganova, T.; Rokujo, H.; Rosa, G.; Ryazhskaya, O.; Sadovsky, A.; Sato, O.; Schembri, A.; Shakiryanova, I.; Shchedrina, T.; Shibuya, H.; Shibayama, E.; Shiraishi, T.; Simone, S.; Sirignano, C.; Sirri, G.; Sotnikov, A.; Spinetti, M.; Stanco, L.; Starkov, N.; Stellacci, S.M.; Stipcevic, M.; Strolin, P.; Takahashi, S.; Tenti, M.; Terranova, F.; Tioukov, V.; Tufanli, S.; Ustyuzhanin, A.; Vasina, S.; Vilain, P.; Voevodina, E.; Votano, L.; Vuilleumier, J.L.; Wilquet, G.; Wonsak, B.; Yoon, C.S.

2018-05-23

The OPERA experiment was designed to study νμ→ντ oscillations in the appearance mode in the CERN to Gran Sasso Neutrino beam (CNGS). In this Letter, we report the final analysis of the full data sample collected between 2008 and 2012, corresponding to 17.97×1019 protons on target. Selection criteria looser than in previous analyses have produced ten ντ candidate events, thus reducing the statistical uncertainty in the measurement of the oscillation parameters and of ντ properties. A multivariate approach for event identification has been applied to the candidate events and the discovery of ντ appearance is confirmed with an improved significance level of 6.1σ. |Δm322| has been measured, in appearance mode, with an accuracy of 20%. The measurement of the ντ charged-current cross section, for the first time with a negligible contamination from ν¯τ, and the first direct evidence for the ντ lepton number are also reported.
Full perimeter intersection criteria. Definitions and implementations in SR-Site

Energy Technology Data Exchange (ETDEWEB)

Munier, Raymond

2010-03-15

Large fractures intersecting canisters have potential to reactivate due to nearby earthquakes and thereby jeopardising the canister/buffer integrity. The use of full perimeter intersection (FPI) as a proxy for fracture size has been explored within SKB since late 2004. A methodology to use FPI as a deposition hole rejection criterion was first reported in and the concept has successively matured ever since. As a response to feedback obtained from various instances of our organisation and external reviewers, additional analyses and benchmarks were reported in 2007. An analytical solution to the canister/fracture intersection probability was introduced, which enabled us to benchmark various aspects of the FPI simulations. The methodology was first applied within the framework of SR-CAN to compute the number of potentially critical canister positions and soon after, based on preliminary DFN models, as one of many prerequisites for repository design. The methodology and simulation logic has evolved substantially ever since it was originally reported in 2006 and the present report is intended to entirely replace previous reports on this subject, to thereby provide the interested reader with an description of the modelling procedure, prerequisites and limitations. As a consequence thereof, major portions of previous reports are repeated herein, though we occasionally refer to these reports for comparative purposes. Furthermore, as the final versions of the site descriptive models have been reported we find it convenient to, within this report, also apply the methodology using the most actual site specific fracture data
Waste Isolation Pilot Plant: Final supplement environmental impact statement

International Nuclear Information System (INIS)

1990-01-01

The purpose of this Supplement Environmental Impact Statement (SEIS) is to update the environmental record established in 1980 by evaluating the environmental impacts associated with new information, new circumstances, and proposal modifications. This SEIS evaluates and compares the Proposed Action and two alternatives. This final SEIS for the WIPP project is a revision of the draft SEIS published in April 1989. It includes responses to the public comments received in writing and at the public hearings and revisions of the draft SEIS in response to the public comments. Revisions of importance have been identified in this final SEIS by vertical lines in the margins to highlight changes made in response to comments. Volumes 1 through 3 of the final SEIS contain the text, appendices, and the summary comments and responses, respectively. Volumes 6 through 13 of the final SEIS contain reproductions of all of the comments received on the draft SEIS, and Volumes 4 and 5 contain the indices to Volumes 6 through 13. An Executive Summary and/or Volumes 1 through 5 of the final SEIS have been distributed to those who received the draft SEIS or requested a copy of the final SEIS. Volume 5 contains indices to public comments
10 CFR 51.97 - Final environmental impact statement-materials license.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-Materials Licenses § 51.97 Final environmental impact statement—materials license. (a) Independent spent fuel storage installation (ISFSI...
19 CFR 177.31 - Reexamination of final determinations.

Science.gov (United States)

2010-04-01

...; DEPARTMENT OF THE TREASURY (CONTINUED) ADMINISTRATIVE RULINGS Government Procurement; Country-of-Origin... final determination was the subject of a contested lawsuit timely filed in the Court of International Trade under 28 U.S.C. 1581(e) or, (b) the merchandise at issue in the initial final determination was...
Cosmology Without Finality

Science.gov (United States)

Mahootian, F.

2009-12-01

The rapid convergence of advancing sensor technology, computational power, and knowledge discovery techniques over the past decade has brought unprecedented volumes of astronomical data together with unprecedented capabilities of data assimilation and analysis. A key result is that a new, data-driven "observational-inductive'' framework for scientific inquiry is taking shape and proving viable. The anticipated rise in data flow and processing power will have profound effects, e.g., confirmations and disconfirmations of existing theoretical claims both for and against the big bang model. But beyond enabling new discoveries can new data-driven frameworks of scientific inquiry reshape the epistemic ideals of science? The history of physics offers a comparison. The Bohr-Einstein debate over the "completeness'' of quantum mechanics centered on a question of ideals: what counts as science? We briefly examine lessons from that episode and pose questions about their applicability to cosmology. If the history of 20th century physics is any indication, the abandonment of absolutes (e.g., space, time, simultaneity, continuity, determinacy) can produce fundamental changes in understanding. The classical ideal of science, operative in both physics and cosmology, descends from the European Enlightenment. This ideal has for over 200 years guided science to seek the ultimate order of nature, to pursue the absolute theory, the "theory of everything.'' But now that we have new models of scientific inquiry powered by new technologies and driven more by data than by theory, it is time, finally, to relinquish dreams of a "final'' theory.
Airframe Noise Prediction of a Full Aircraft in Model and Full Scale Using a Lattice Boltzmann Approach

Science.gov (United States)

Fares, Ehab; Duda, Benjamin; Khorrami, Mehdi R.

2016-01-01

Unsteady flow computations are presented for a Gulfstream aircraft model in landing configuration, i.e., flap deflected 39deg and main landing gear deployed. The simulations employ the lattice Boltzmann solver PowerFLOW(Trademark) to simultaneously capture the flow physics and acoustics in the near field. Sound propagation to the far field is obtained using a Ffowcs Williams and Hawkings acoustic analogy approach. Two geometry representations of the same aircraft are analyzed: an 18% scale, high-fidelity, semi-span model at wind tunnel Reynolds number and a full-scale, full-span model at half-flight Reynolds number. Previously published and newly generated model-scale results are presented; all full-scale data are disclosed here for the first time. Reynolds number and geometrical fidelity effects are carefully examined to discern aerodynamic and aeroacoustic trends with a special focus on the scaling of surface pressure fluctuations and farfield noise. An additional study of the effects of geometrical detail on farfield noise is also documented. The present investigation reveals that, overall, the model-scale and full-scale aeroacoustic results compare rather well. Nevertheless, the study also highlights that finer geometrical details that are typically not captured at model scales can have a non-negligible contribution to the farfield noise signature.
Final Energy Consumption Trends and Drivers in Czech Republic and Latvia

OpenAIRE

Zhiqian Yu; Dalia Streimikiene; Tomas Balezentis; Rimantas Dapkus; Radislav Jovovic; Veselin Draskovic

2017-01-01

This paper analyses the trends of final energy consumption in Latvia and Czech Republic. Analysis of final energy consumption during 2000-2013 period indicated the main driving forces of final energy consumption during and after world financial crisis of 2008. The paper aimed to evaluate the impact of economic activity and other factors on final energy consumption. The decomposition of the final energy consumption is assessed by analyzing effect of different drivers by the main end-users sect...
Construction of a full-length prototype of the BESIII drift chamber and on-detector test for the BESIII drift chamber electronics

International Nuclear Information System (INIS)

Qin Zhonghua; Wu Linghui; Liu Jianbei; Chinese Academy of Sciences, Beijing; Yan Zhikang; Hunan Univ., Changsha; Chen Yuanbo; Chen Chang; Xu Meihang; Wang Lan; Ma Xiaoyan; Jin Yan; Liu Rongguang; Tang Xiao; Zhang Guifang; Zhu Qiming; Sheng Huayi; Zhu Kejun

2007-01-01

A full-length prototype of the BESIII drift chamber was built. The experience gained on gas sealing, high voltage supply and front-end electronics installation should be greatly beneficial to the successful construction of the BESIII drift chamber. An on-detector test of the BESIII drift chamber electronics was carried out with the constructed prototype chamber. The noise performance, drift time and charge measurements, and electronics gains were examined specifically. The final test results indicate that the electronics have a good performance and can satisfy their design requirements. (authors)
Purchasing motors in the light of full-cost calculation; Beschaffung von Motoren unter der Vollkostenbetrachtung

Energy Technology Data Exchange (ETDEWEB)

Mauchle, P.; Schnyder, G.

2006-07-01

This final report published by the Swiss Federal Office of Energy (SFOE) presents the results of a study made on how full-cost calculation can help define the optimal purchasing strategy for electrical drives. According to the authors, taking total life-cycle costs into consideration also guarantees economical operation and helps avoid unexpected service costs. The report describes the goals of the project and co-operation with industry and users. Factors influencing life-cycle costs are looked at in detail, including investments, installation and operator-training, operation and monitoring as well as maintenance and repair. Also, energy costs are looked at, as are environmental aspects and the disposal of drives taken out of service. The calculation of the economic feasibility of two types of motor is looked at. Sample Calls for Tender are presented and software for the evaluation of offers is briefly discussed.
A near-peer teaching program designed, developed and delivered exclusively by recent medical graduates for final year medical students sitting the final objective structured clinical examination (OSCE

Directory of Open Access Journals (Sweden)

Sobowale Oluwaseun

2011-03-01

Full Text Available Abstract Background The General Medical Council states that teaching doctors and students is important for the care of patients. Our aim was to deliver a structured teaching program to final year medical students, evaluate the efficacy of teaching given by junior doctors and review the pertinent literature. Methods We developed a revision package for final year medical students sitting the Objective Structured Clinical Examination (OSCE. The package was created and delivered exclusively by recent medical graduates and consisted of lectures and small group seminars covering the core areas of medicine and surgery, with a focus on specific OSCE station examples. Students were asked to complete a feedback questionnaire during and immediately after the program. Results One hundred and eighteen completed feedback questionnaires were analysed. All participants stated that the content covered was relevant to their revision. 73.2% stated that junior doctors delivered teaching that is comparable to that of consultant - led teaching. 97.9% stated the revision course had a positive influence on their learning. Conclusions Our study showed that recent medical graduates are able to create and deliver a structured, formal revision program and provide a unique perspective to exam preparation that was very well received by our student cohort. The role of junior doctors teaching medical students in a formal structured environment is very valuable and should be encouraged.
On final states of two-dimensional decaying turbulence

NARCIS (Netherlands)

Yin, Z.

2004-01-01

Numerical and analytical studies of final states of two-dimensional (2D) decaying turbulence are carried out. The first part of this work is trying to give a definition for final states of 2D decaying turbulence. The functional relation of ¿-¿, which is frequently adopted as the characterization of

Regulatory criteria for final disposal of radioactive wastes

International Nuclear Information System (INIS)

Petraitis, E.; Ciallella, N.; Siraky, G.

1998-01-01

This paper describes briefly the legislative and regulatory framework in which the final disposal of radioactive wastes is carried out in Argentina. It also presents the criteria developed by the Nuclear Regulatory Authority (ARN) to assess the long-term safety of final disposal systems for high level radioactive wastes. (author)
21 CFR 1314.155 - Suspension pending final order.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Suspension pending final order. 1314.155 Section 1314.155 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE RETAIL SALE OF SCHEDULED LISTED CHEMICAL PRODUCTS Order to Show Cause § 1314.155 Suspension pending final order. (a) The...
23 CFR 771.125 - Final environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Final environmental impact statements. 771.125 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.125 Final environmental impact statements. (a)(1..., economic, or environmental impacts of the action may need to be more fully explored; (iii) the impacts of...
Reversible one-dimensional cellular automata with one of the two Welch indices equal to 1 and full shifts

International Nuclear Information System (INIS)

Mora, Juan Carlos Seck Tuoh; Hernandez, Manuel Gonzalez; Vergara, Sergio V Chapa

2003-01-01

Reversible cellular automata are invertible discrete dynamical systems which have been widely studied both for analysing interesting theoretical questions and for obtaining relevant practical applications, for instance, simulating invertible natural systems or implementing data coding devices. An important problem in the theory of reversible automata is to know how the local behaviour which is not invertible is able to yield a reversible global one. In this sense, symbolic dynamics plays an important role for obtaining an adequate representation of a reversible cellular automaton. In this paper we prove the equivalence between a reversible automaton where the ancestors only differ at one side (technically with one of the two Welch indices equal to 1) and a full shift. We represent any reversible automaton by a de Bruijn diagram, and we characterize the way in which the diagram produces an evolution formed by undefined repetitions of two states. By means of amalgamations, we prove that there is always a way of transforming a de Bruijn diagram into the full shift. Finally, we provide an example illustrating the previous results
Reversible one-dimensional cellular automata with one of the two Welch indices equal to 1 and full shifts

Energy Technology Data Exchange (ETDEWEB)

Mora, Juan Carlos Seck Tuoh [Centro de Investigacion Avanzada en Ingenieria Industrial, Universidad Autonoma del Estado de Hidalgo, Carr Pachuca-Tulancingo Km 4.5, 42020 Pachuca (Mexico); Hernandez, Manuel Gonzalez [Centro de Investigacion Avanzada en Ingenieria Industrial, Universidad Autonoma del Estado de Hidalgo, Carr Pachuca-Tulancingo Km 4.5, 42020 Pachuca (Mexico); Vergara, Sergio V Chapa [Depto de Ingenieria Electrica, Seccion Computacion, Centro de Investigacion y de Estudios Avanzados, Instituto Politecnico Nacional, Av IPN 2508, Col San Pedro Zacatenco, 07300 DF (Mexico)

2003-07-25

Reversible cellular automata are invertible discrete dynamical systems which have been widely studied both for analysing interesting theoretical questions and for obtaining relevant practical applications, for instance, simulating invertible natural systems or implementing data coding devices. An important problem in the theory of reversible automata is to know how the local behaviour which is not invertible is able to yield a reversible global one. In this sense, symbolic dynamics plays an important role for obtaining an adequate representation of a reversible cellular automaton. In this paper we prove the equivalence between a reversible automaton where the ancestors only differ at one side (technically with one of the two Welch indices equal to 1) and a full shift. We represent any reversible automaton by a de Bruijn diagram, and we characterize the way in which the diagram produces an evolution formed by undefined repetitions of two states. By means of amalgamations, we prove that there is always a way of transforming a de Bruijn diagram into the full shift. Finally, we provide an example illustrating the previous results.
Full employment maintenance in the private sector

Science.gov (United States)

Young, G. A.

1976-01-01

Operationally, full employment can be accomplished by applying modern computer capabilities, game and decision concepts, and communication feedback possibilities, rather than accepted economic tools, to the problem of assuring invariant full employment. The government must provide positive direction to individual firms concerning the net number of employees that each firm must hire or refrain from hiring to assure national full employment. To preserve free enterprise and the decision making power of the individual manager, this direction must be based on each private firm's own numerical employment projections.
Ultra low power full adder topologies

DEFF Research Database (Denmark)

Moradi, Farshad; Wisland, Dag T.; Mahmoodi, Hamid

In this paper several low power full adder topologies are presented. The main idea of these circuits is based on the sense energy recovery full adder (SERF) design and the GDI (gate diffusion input) technique. These subthreshold circuits are employed for ultra low power applications. While the pr...... the proposed circuits have some area overhead that is negligible, they have at least 62% less power dissipation when compared with existing designs. In this paper, 65 nm standard models are used for simulations....
Buffer management in wireless full-duplex systems

KAUST Repository

Bouacida, Nader; Showail, Ahmad; Shihada, Basem

2015-01-01

, we address the problem of buffer management in full-duplex networks by using Wireless Queue Management (WQM), which is an active queue management technique for wireless networks. Our solution is based on Relay Full-Duplex MAC (RFD
78 FR 29117 - After Final Consideration Pilot Program 2.0

Science.gov (United States)

2013-05-17

...] After Final Consideration Pilot Program 2.0 AGENCY: United States Patent and Trademark Office, Commerce... Final Consideration Pilot Program (AFCP) to create the After Final Consideration Pilot Program 2.0 (AFCP....0 to consider the response. If the examiner's consideration of a proper AFCP 2.0 request and...
Acquisition Pricing and Inventory Decisions on Dual-Source Spare-Part System with Final Production and Remanufacturing

Directory of Open Access Journals (Sweden)

Yancong Zhou

2016-01-01

Full Text Available The life spans of durable goods are longer than their warranty periods. To satisfy the service demand of spare parts and keep the market competition advantage, enterprises have to maintain the longer inventory planning of spare parts. However, how to obtain a valid number of spare parts is difficult for those enterprises. In this paper, we consider a spare-part inventory problem, where the inventory can be replenished by two ways including the final production order and the remanufacturing way. Especially for the remanufacturing way, we consider the acquisition management problem of used products concerning an acquisition pricing decision. In a multiperiod setting, we formulate the problem into a dynamic optimization problem, where the system decisions include the final production order and acquisition price of used products at each period. By stochastic dynamic programming, we obtain the optimal policy of the acquisition pricing at each period and give the optimal policy structure of the optimization problem at the first period. Then, a recursion algorithm is designed to calculate the optimal decisions and the critical points in the policy. Finally, the numerical analyses show the effects of demand information and customer’s sensitive degree on the related decisions and the optimal cost.
Biclique cryptanalysis of the full AES

DEFF Research Database (Denmark)

Bogdanov, Andrey; Khovratovich, Dmitry; Rechberger, Christian

2011-01-01

Since Rijndael was chosen as the Advanced Encryption Standard (AES), improving upon 7-round attacks on the 128-bit key variant (out of 10 rounds) or upon 8-round attacks on the 192/256-bit key variants (out of 12/14 rounds) has been one of the most difficult challenges in the cryptanalysis of block...... ciphers for more than a decade. In this paper, we present the novel technique of block cipher cryptanalysis with bicliques, which leads to the following results: The first key recovery method for the full AES-128 with computational complexity 2126.1. The first key recovery method for the full AES-192...... with computational complexity 2189.7. The first key recovery method for the full AES-256 with computational complexity 2254.4. Key recovery methods with lower complexity for the reduced-round versions of AES not considered before, including cryptanalysis of 8-round AES-128 with complexity 2124.9. Preimage search...
Full scale solvent extraction remedial results

International Nuclear Information System (INIS)

Cash, A.B.

1992-01-01

Sevenson Extraction Technology, Inc. has completed the development of the Soil Restoration Unit (initially developed by Terra-Kleen Corporation), a mobile, totally enclosed solvent extraction treatment facility for the removal of organic contaminated media is greater by a closed loop, counter current process that recycles all solvents. The solvents used are selected for the individual site dependant upon the contaminants, such as PCB's, oil, etc. and the soil conditions. A mixture of up to fourteen non-toxic solvents can be used for complicated sites. The full scale unit has been used to treat one superfund site, the Traband Site in Tulsa, Oklahoma, and is currently treating another superfund site, the Pinette's Salvage Yard Site in Washburn, Maine. The full scale Soil Restoration Unit has also been used at a non-superfund site, as part of a TSCA Research and Development permit. The results from these sites will be discussed in brief herein, and in more detail in the full paper
FullSSR: Microsatellite Finder and Primer Designer

Directory of Open Access Journals (Sweden)

Sebastián Metz

2016-01-01

Full Text Available Microsatellites are genomic sequences comprised of tandem repeats of short nucleotide motifs widely used as molecular markers in population genetics. FullSSR is a new bioinformatic tool for microsatellite (SSR loci detection and primer design using genomic data from NGS assay. The software was tested with 2000 sequences of Oryza sativa shotgun sequencing project from the National Center of Biotechnology Information Trace Archive and with partial genome sequencing with ROCHE 454® from Caiman latirostris, Salvator merianae, Aegla platensis, and Zilchiopsis collastinensis. FullSSR performance was compared against other similar SSR search programs. The results of the use of this kind of approach depend on the parameters set by the user. In addition, results can be affected by the analyzed sequences because of differences among the genomes. FullSSR simplifies the detection of SSRs and primer design on a big data set. The command line interface of FullSSR was intended to be used as part of genomic analysis tools pipeline; however, it can be used as a stand-alone program because the results are easily interpreted for a nonexpert user.
The final cool down

CERN Multimedia

Thursday 29th May, the cool-down of the final sector (sector 4-5) of LHC has begun, one week after the start of the cool-down of sector 1-2. It will take five weeks for the sectors to be cooled from room temperature to 5 K and a further two weeks to complete the cool down to 1.9 K and the commissioning of cryogenic instrumentation, as well as to fine tune the cryogenic plants and the cooling loops of cryostats.Nearly a year and half has passed since sector 7-8 was cooled for the first time in January 2007. For Laurent Tavian, AT/CRG Group Leader, reaching the final phase of the cool down is an important milestone, confirming the basic design of the cryogenic system and the ability to operate complete sectors. “All the sectors have to operate at the same time otherwise we cannot inject the beam into the machine. The stability and reliability of the cryogenic system and its utilities are now very important. That will be the new challenge for the coming months,” he explains. The status of the cool down of ...
Full autonomy; Autarkie im Komplettpaket

Energy Technology Data Exchange (ETDEWEB)

Augsten, Eva

2011-05-31

Normally, those who talk of full solar autonomy refer to the annual balance of a house. Now, architect Timo Leukefeld and Helma Eigenheimbau AG presented a really autonomous solar house which is available on a turnkey basis for 363,000 Euros.
Access to Federal Employees Health Benefits (FEHB) for Employees of Certain Indian Tribal Employers. Final rule.

Science.gov (United States)

2016-12-28

This final rule makes Federal employee health insurance accessible to employees of certain Indian tribal entities. Section 409 of the Indian Health Care Improvement Act (codified at 25 U.S.C. 1647b) authorizes Indian tribes, tribal organizations, and urban Indian organizations that carry out certain programs to purchase coverage, rights, and benefits under the Federal Employees Health Benefits (FEHB) Program for their employees. Tribal employers and tribal employees will be responsible for the full cost of benefits, plus an administrative fee.
Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Final Report

International Nuclear Information System (INIS)

Timothy Shaw; Anthony Baratta; Vaughn Whisker

2005-01-01

Final report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Mockups applied to design review of AP600/1000, Construction planning for AP 600, and AP 1000 maintenance evaluation. Proof of concept study also performed for GenIV PBMR models
Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Final Report

Energy Technology Data Exchange (ETDEWEB)

Timothy Shaw; Anthony Baratta; Vaughn Whisker

2005-02-28

Final report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Mockups applied to design review of AP600/1000, Construction planning for AP 600, and AP 1000 maintenance evaluation. Proof of concept study also performed for GenIV PBMR models.
Nitrogen Removal in a Full-Scale Domestic Wastewater Treatment Plant with Activated Sludge and Trickling Filter

Directory of Open Access Journals (Sweden)

Davood Nourmohammadi

2013-01-01

Full Text Available During the last decade, more stringent effluent requirements concerning the nutrients effluent values have been imposed by legislation and social concern. In this study, efficiency of total nitrogen removal in activated sludge and trickling filter processes (AS/TF was investigated in Tehran North wastewater treatment plant. Biological system in this site was included, anoxic selector tank, aeration tank, final sedimentation, and trickling filter. A part of treated wastewater before chlorination was mixed with supernatant of dewatered sludge and fed to the trickling filter. Supernatant of dewatered sludge with high concentration of NH4-N was diluted by treated wastewater to provide complete nitrification in trickling filter Produced nitrate in trickling filter was arrived to the anoxic tank and converted to nitrogen gas by denitrification. According to the study result, low concentration of organic carbone and high concentration of NH4-N led to nitrification in TF, then nitrate denitrification to nitrogen gas occurred in selector area. NH4-N concentration decreased from 26.8 mg/L to 0.29 mg/L in TF, and NO3-N concentration increased from 8.8 mg/L to 27 mg/L in TF. Consequently, the total nitrogen decreased approximately to 50% in biological process. This efficiency has been observed in returned flow around 24% from final sedimentation into TF. It was concluded that, in comparison with biological nutrient removal processes, this process is very efficient and simple.
Nuevas aportaciones al horizonte del bronce final de La Vital (Gandia, València

Directory of Open Access Journals (Sweden)

Pablo García Borja

2014-01-01

Full Text Available Durante las tareas de seguimiento arqueológico de las obras de construcción del Acceso Sur a Gandia se localizaron diferentes estructuras negativas datadas en el Bronce final ubicadas en el perímetro de protección del yacimiento de La Vital. Las estructuras documentadas corresponden a un lugar de hábitat fechado en estos momentos. En este trabajo presentamos los resultados de dicha actuación, valorándolos en el marco del desarrollo histórico de este periodo en el propio yacimiento y en la costa mediterránea peninsular.

Development of Laser Velocimetry for the Measurements of Turbulence Intensity and Flow Velocity Ahead of a NGV Row in a Full-Stage Rotating Turbine

Science.gov (United States)

1993-09-01

INTRODUCTION This document represents a letter final report for the Caispan UB Research Center ( CUBRC ) contract no. F33615-85-C-2566. There have been many...was that CUBRC would design, construct, and calibrate heat-flux gage inserts for the Advanced High Work Turbine (AHWT) vane which is the next...Row in a Full-Stage Rotating Turbine (Unsolicited Proposal No. 102)" is herein incorporated by reference. The CUBRC proposal to which SECTION C refers
Final Report of the NASA Technology Readiness Assessment (TRA) Study Team

Science.gov (United States)

Hirshorn, Steven; Jefferies, Sharon

2016-01-01

The material in this report covers the results on the NASA-wide TRA team, who are responsible for ascertaining the full extent of issues and ambiguities pertaining to TRATRL and to provide recommendations for mitigation. The team worked for approximately 6 months to become knowledgeable on the current TRATRL process and guidance and to derive recommendations for improvement.The team reviewed the TRA processes of other government agencies (OGA), including international agencies, and found that while the high-level processes are similar, the NASA process has a greater level of detail. Finally, NASA’s HQ OCT continues to monitor the GAO’s efforts to produce a TRA Best Practices Guide, a draft of which was received in February 2016. This Guide could impact the recommendations of this report.
Development of the DL/H-1 full pressure suit for private spaceflight

Science.gov (United States)

León, Pablo de; Harris, Gary L.

2010-06-01

The objective of this paper is to detail the need for full pressure suits to protect spaceflight participants during the experimental phases of flight testing of new space vehicles. It also details the objectives, historical background, basis for design, problems encountered by the designers and final development of the DL/H-1 full pressure suit. It will include justification for its use and results of the initial tests in the high altitude chamber and spacecraft simulator at the J.D. Odegard School of Aerospace Sciences at the University of North Dakota. For the test flights of early commercial space vehicles and tourist suborbital spacecrafts, emergency protection from the rarified air of the upper atmosphere and the vacuum of low Earth orbit almost certainly will be a requirement. Suborbital vehicles could be operating in "space equivalent conditions" for as long as 30 min to as much as several hours. In the case of cabin pressure loss, without personal protection, catastrophic loss of crew and vehicle could result. This paper explains the different steps taken by the authors who designed and built a preflight hardware pressure suit that can meet the physiological and comfort requirements of the tourist suborbital industry and the early commercial private spaceflight community. The suborbital tourist and commercial spaceflight industry have unique problems confronting the pressure suit builder such as unpressurized comfort, reasonable expense, unique sizing of the general population, decompression complications of persons not fitting a past military physiology profile and equipment weight issues. In addition, the lack of a certifying agency or guidance from international or national aviation authorities has created the opportunity for the emerging civilian pressure suit industry to create a new safety standard by which it can regulate itself in the same way the recreational SCUBA diving industry has since the late 1950s.
Herbert: Design and Realisation of an full-sized anthropometrically correct humanoid robot

Directory of Open Access Journals (Sweden)

Brennand ePierce

2015-06-01

Full Text Available In this paper we present the development of a new full-sized anthropometrically correct humanoid robot Herbert. Herbert has 33 DOFs: 1 29 active DOFs (2 × 4 in the legs, 2 × 7 in the arms, 4 in the waist and 3 in the head; 2 4 passive DOFs (2 × 2 in the ankles. We present the objectives of the design and the development of our system, the hardware (mechanical, electronics as well as the supporting software architecture that encompasses the realisation of the complete humanoid system.Several key elements, that have to be taken into account in our approach to keep the costs low while ensuring high-performance, will be presented. In realising Herbert we applied a modular design for the overall mechanical structure. Two core mechanical module types make up the main structural elements of Herbert: 1 small compact mechanical drive modules; and 2 compliant mechanical drive modules. The electronic system of Herbert, which is based on two different types of motor control boards and an FPGA module with a central controller, is discussed. The software architecture is based on ROS with a number of sub nodes used for the controller. All these supporting components have been important in the development of the complete system.Finally, we present results showing our robot’s performances: demonstrating the behaviour of the compliant modules, the ability of tracking a desired position/velocity as well as a simple torque controller. We also evaluate our custom communication system. Additionally, we demonstrate Herbert balancing and squatting to show its performance. Moreover, we also show the simplicity of the higher level supporting software framework in realising new behaviours. All in all, we show that our system is compact and able to achieve comparable human performances and has human proportions while being low cost.
Bisphenol A; Final Test Rule

Science.gov (United States)

EPA is issuing a final rule, under section 4 of the Toxic Substances Control Act (TSCA) requiring manufacturers and processors of bisphenol A, hereinafter BPA, (4.4’-isopropylidenediphenol, CAS No. 80-05—7) to conduct a 90-day inhalation study.
CMS Is Finally Completed

CERN Multimedia

2008-01-01

Yet another step in the completion of the Large Hadron Collider was taken yesterday morning, as the final element of the Compact Muon Solenoid was lowered nearly 100 meters bellow ground. After more than eight years of work at the world's most powerful particle accelerator, scientists hope that they will be able to start initial experiments with the LHC until the end of this year.
Super-Kamiokande worth full restoration

CERN Multimedia

Mishima, I

2002-01-01

While prospects are good that the SuperKamiokande facility will be partially repaired after an accident last November, the government has yet to confirm whether it will spend the estimated 2.5 billion yen needed for a full-scale restoration (1 page).
Forest Canopy LAI and Vertical FAVD Profile Inversion from Airborne Full-Waveform LiDAR Data Based on a Radiative Transfer Model

Directory of Open Access Journals (Sweden)

Han Ma

2015-02-01

Full Text Available Forest canopy leaf area index (LAI is a critical variable for the modeling of climates and ecosystems over both regional and global scales. This paper proposes a physically based method to retrieve LAI and foliage area volume density (FAVD profile directly from full-waveform Light Detection And Ranging (LiDAR data using a radiative transfer (RT model. First, a physical interaction model between LiDAR and a forest scene was built on the basis of radiative transfer theories. Next, FAVD profile of each laser shot of full-waveform LiDAR was inverted using the physical model. In addition, the missing LiDAR data, caused by high-density forest and LiDAR system limitations, were filled in based on the inverted FAVD and the ancillary CHM data. Finally, LAI of the study area was retrieved from the inverted FAVD at a 10-m resolution. CHM derived LAI based on the Beer-Lambert law was compared with the LAI derived from full-waveform data. Also, we compared the results with the field measured LAI. The values of correlation coefficient r and RMSE of the estimated LAI were 0.73 and 0.67, respectively. The results indicate that full-waveform LiDAR data is a reliable data source and represent a useful tool for retrieving forest LAI.
The orthopositronium lifetime puzzle and its final solution

International Nuclear Information System (INIS)

Liu Feng; Wu Jianda; Zhan Liang; Ye Bangjiao

2004-01-01

The ortho-positronium (o-Ps), which consists of an electron and positron, is a pure lepton bound system. The o-Ps lifetime can be calculated accurately by quantum electrodynamics, but there is a long-standing discrepancy between the theoretical calculations and the experimental results. Theoretical and experimental physicists have worked hard for a long time to solve the problem, and recently finally solved this lifetime puzzle. The authors briefly outline the discrepancy between the theoretical calculations of the o-Ps annihilation decay rate and some of the experimental measurements, as well as recent developments of experimental techniques, and its final solution. In particular, the final results of the Tokyo and michigan groups are discussed
Successful closure of treatment-naïve, flat edge (Type II, full-thickness macular hole using inverted internal limiting membrane flap technique

Directory of Open Access Journals (Sweden)

Hussain N

2016-10-01

Full Text Available Nazimul Hussain,1 Anjli Hussain2 1Department of Ophthalmology, Al Zahra Hospital, 2Al Zahra Medical Center, Dubai, United Arab Emirates Objective: The objective of this study was to present the outcome of the internal limiting membrane (ILM peeling flap technique for a treatment-naïve, flat edge (Type II, full-thickness macular hole (MH. Methods: A 52-year-old man presented with complaints of decreased vision and seeing black spot. He was diagnosed to have a flat edge, full-thickness MH, which was confirmed by optical coherence tomography (OCT. He underwent 23G vitrectomy with brilliant blue G-assisted inverted ILM peeling with an inverted flap over the hole followed by fluid gas exchange. Results: Postoperative follow-up until 3 months showed successful closure of the MH, which was confirmed by OCT. The best-corrected visual acuity improved from baseline 6/60 to 6/12 at the final follow-up. Conclusion: Using the inverted ILM flap technique, a treatment-naïve, flat edge (Type II, full thickness MH achieved successful anatomical and functional outcomes. Keywords: macular hole, inverted ILM, optical coherence tomography
UOP FIN 571 Final Exam Guide New

OpenAIRE

ADMIN

2018-01-01

UOP FIN 571 Final Exam Guide New Check this A+ tutorial guideline at http://www.fin571assignment.com/fin-571-uop/fin-571-final-exam-guide -latest For more classes visit http://www.fin571assignment.com Question 1 The underlying assumption of the dividend growth model is that a stock is worth: A. An amount computed as the next annual dividend divided by the required rate of return. B. An amount computed as the next annual dividend divided by the ma...
Final height and body mass index after treatment for childhood acute lymphoblastic leukemia

Directory of Open Access Journals (Sweden)

Tadej Battelino

2006-03-01

Full Text Available Background: Newer and more agressive forms of chemotherapy and newer protocols in the treatment have increased the survival rate of children with malignancies. Improved survival rates in children treated for acute lymphoblastic leukemia have focused attention on late effects including disorders of growth and puberty, and development of overweight or obesity.Methods: The height and weight expressed as body mass index (BMI of 47 patients (29 girls, 18 boys long-term survivors of childhood lymphoblastic leukemia was retrospectively analyzed. Height standard deviation score (HSDS according to Tanner and body mass index standard deviation scores (BMISDS before treatment and at follow-up were calculated. At the time of analysis all patients remained in first remission. Twenty-eight patients had cranial radiation with 12–18 Gy and 15 with 20–30 Gy. Four patients had no radiotherapy. All patients were treated with standard chemotherapy including intrathecal Methotrexat. Mean age (SD at the diagnosis was 5 5/12 (3 2/12 years, range (5/12 – 12 5/12 and at the time of evaluation 17 11/12 (3 9/12 years, range (10 1/12 – 31 6/12.Results: We observed significant decrease in HSDS from diagnosis to the final height in both radiation groups (p < 0.01 but the decrement in final height was similar with both radiation dose regimens. The decrement in final height SDS was greater in patients treated at a younger age (Pearson, p < 0.01. Girls treated with higher radiation dose (20–30 Gy were more severely affected than boys. In both radiation dose treatment groups there was a significant increase in BMISDS between diagnosis and final height (p < 0.0001 with no significant difference between treatment groups. Menarche occurred earlier in girls than normal with no significant difference between both radiation dose regimens.Conclusions: We observed significant deterioration in HSDS and increment in BMISDS regardless to the radiation dose.
Systems study 'Alternative Entsorgung'. Final report. Technical annex 6

International Nuclear Information System (INIS)

1984-08-01

In the conditioning plant, fuel elements which have been stored for ten years are loaded into transport containers, unloaded, identified and welded into a dry storage box. The dry store barrel is introduced into a final storage container, which, after being closed, is packed in lost shielding. This so-called final storage barrel is finally placed in a transport container and leaves the conditioning plant in this form by rail for transport to the final storage mine. The fuel element method of treatment 'packing of three complete fuel elements' was used as the reference process. In addition, the method of treatment 'fuel elements dismantled into fuel rods' was also examined. The handling of fuel elements and secondary waste treatment in the reference process are described in detail. (orig./HP) [de
19 CFR 12.9 - Release for final delivery to consignee.

Science.gov (United States)

2010-04-01

...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Meat and Meat-Food Products § 12.9 Release for final delivery to consignee. No meat, meat-food products, or animal casings shall be released for final... 19 Customs Duties 1 2010-04-01 2010-04-01 false Release for final delivery to consignee. 12.9...
22 CFR 72.5 - Final report of death.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...
The Fiction of Full BEKK

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); M.J. McAleer (Michael)

2017-01-01

textabstractThe purpose of the paper is to show that univariate GARCH is not a special case of multivariate GARCH, specifically the Full BEKK model, except under parametric restrictions on the off-diagonal elements of the random coefficient autoregressive coefficient matrix, provides the regularity
Empty calories and phantom fullness

NARCIS (Netherlands)

Camps, Guido; Mars, Monica; Graaf, de Kees; Smeets, Paul A.M.

2016-01-01

Background: Stomach fullness is a determinant of satiety. Although both the viscosity and energy content have been shown to delay gastric emptying, their relative importance is not well understood. Objective: We compared the relative effects of and interactions between the viscosity and energy
Development Of Robust IFE Laser Mirrors and Multi-Scale Modeling Of Pulsed Radiation Effects. Final Report

International Nuclear Information System (INIS)

Ghoniem, Nasr M.

2009-01-01

The following has been achieved: (1) Final design of a Deformable Grazing Incidence Mirror, (2) Formulation of a new approach to model surface roughening under laser illumination, and (3) Modeling of radiation hardening under IFE conditions. We discuss here progress made in each one of these areas. The objectives of the Grazing Incidence Metal Mirror (GIMM) are: (1) to reflect the incident laser beam into the direction of the target; (2) to focus the incident beam directly onto the target (3) to withstand the thermomechanical and damage induced by laser beams; (4) to correct the reflective surface so that the focus is permanently on the target; (5) to have a full range of motion so it can be placed anywhere relative to the target. The design was described in our progress report of the period August 15, 2003 through April 15, 2004. In the following, we describe further improvements of the final design.
TSA waste stream and final waste form composition

International Nuclear Information System (INIS)

Grandy, J.D.; Eddy, T.L.; Anderson, G.L.

1993-01-01

A final vitrified waste form composition, based upon the chemical compositions of the input waste streams, is recommended for the transuranic-contaminated waste stored at the Transuranic Storage Area of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. The quantities of waste are large with a considerable uncertainty in the distribution of various waste materials. It is therefore impractical to mix the input waste streams into an ''average'' transuranic-contaminated waste. As a result, waste stream input to a melter could vary widely in composition, with the potential of affecting the composition and properties of the final waste form. This work examines the extent of the variation in the input waste streams, as well as the final waste form under conditions of adding different amounts of soil. Five prominent Rocky Flats Plant 740 waste streams are considered, as well as nonspecial metals and the ''average'' transuranic-contaminated waste streams. The metals waste stream is the most extreme variation and results indicate that if an average of approximately 60 wt% of the mixture is soil, the final waste form will be predominantly silica, alumina, alkaline earth oxides, and iron oxide. This composition will have consistent properties in the final waste form, including high leach resistance, irrespective of the variation in waste stream. For other waste streams, much less or no soil could be required to yield a leach resistant waste form but with varying properties
A preliminary design and structural analysis on the central column for supporting the full 40 .deg. Sectors at tokamak in pit

International Nuclear Information System (INIS)

Nam, Kyoungo; Park, Hyun Ki; Kim, Dong Jin; Moon, Jaeh Wan; Kim, Byung Seok; Watson, Emma; Shaw, Robert

2012-01-01

The ITER Tokamak machine is composed of nine 40 .deg. sectors shaped of torus. Each 40.deg. sector is made up of one 40 .deg. vacuum vessel (VV), two 20 .deg. toroidal filed coils and associated vacuum vessel thermal shield (VVTS) segments which consist of one inboard and two outboard VVTS. The VV/TFC/VVTS 40 .deg. sectors are sub assembled at assembly building respectively at sector sub assembly tool and then nine sub assembled 40 .deg. sectors are finally assembled at in-pit of Tokamak building. ITER sector assembly tools are the purpose built assembly tools to assemble nine 40 .deg. sectors into the complete ITER Tokamak machine at Tokamak in pit. Based on the design description document, final report prepared by the ITER organization (IO) and tooling requirements, Korea has carried out the conceptual and preliminary design of these assembly tools. Especially, the central column is the main tool, which is composed of some hollow cylinders, to support full nine 40 .deg. sectors at Tokamak in pit. Configuration and structural analysis of the central column are presented

The impacts of the final phase of transition to IFRS in Brazil

Directory of Open Access Journals (Sweden)

Clênia de Oliveira Pires

2015-08-01

Full Text Available Objective – This article aims to measure the impacts of the final phase of mandatory convergence to IFRS on net income, in equity and total assets of Brazilian publics companies. Design/methodology/approach – It is applied to the inverse of Gray (1980’s Conservatism Index – which allows you to compare the results between different accounting systems – to determine the impacts of the transition between the two phases of the convergence process in Brazil, covered by the law 11,638 and their CPCs. It was compared the 2009 financial results disclosed in BR GAAP and IFRS. Findings – The results show that the final stage of mandatory convergence to IFRS led to significant increases in both net income and the shareholders’ equity of the companies analysed: a mean increase of about 21% in earnings and about 11% in equity, as well as generating an increase, though somewhat less significant, about 7%, the total assets. Practical implications – This research helped to improve understanding of the impacts of convergence of Brazilian accounting to the international standard; as well as to assist business managers and users of financial information, especially those from the capital markets, regulators and academia, about the ultimate effects on the results reported in 2011, after the implementation of the final phase of convergence. Originality/value – The fiscal year of 2009 was a special year for understanding the impact of accounting system in the financial results disclosed in Brazil. The Brazilian publics companies reported their results in BR GAAP and IFRS and this research analysed and compare both reports and improve understanding of the impacts of convergence of Brazilian accounting to the international standard.
Comportamiento productivo de diferentes genotipos bovinos en una finca comercial. Ceba final

Directory of Open Access Journals (Sweden)

J. M Iglesias

Full Text Available El objetivo de esta investigación fue dar continuidad a los estudios relacionados con el comportamiento productivo de los genotipos bovinos Cebú (C, F1 Holstein x Cebú (HC y Mambí de Cuba (M, realizados durante la ceba inicial en pastoreo y semiestabulación. La ceba final se desarrolló durante 388 días y abarcó la época lluviosa (ELl y la poco lluviosa (EPLl. Se utilizaron los mismos 45 animales del estudio anterior, que se convirtieron en toretes de 18 meses de edad y 241-263 kg de peso, los cuales se mantuvieron divididos en tres grupos de 15 animales cada uno, según un diseño totalmente aleatorizado. Estos pastorearon en un área de gramíneas durante el horario diurno y recibieron en establo sales minerales a voluntad y suplementos (Northgold y afrecho de trigo, a razón de un kilogramo diario en la EPLl y 1,5 kg en la ELl. La disponibilidad de pastos fue de 11,8 y 26,4 kg de MS animal-1 día-1 para la EPLl y la ELl, respectivamente. Hubo diferencias significativas (p < 0,05 en la ganancia diaria de peso vivo a favor de C y HC, con valores de 0,432; 0,364 y 0,256 kg para C, HC y M, respectivamente, en la EPLl; pero los genotipos no difirieron en la ELl. El peso vivo final al sacrificio (p < 0,05 fue de 442,7; 436,3 y 391,6 kg para C, HC y M, respectivamente. Se concluye que los bovinos del genotipo M tuvieron un comportamiento satisfactorio en pastoreo, ya que las ganancias alcanzadas durante la ceba final propiciaron la obtención de animales de segunda categoría, con un peso superior a 390 kg.
Proposed amendment to the final decision document for the hydrazine blending and storage facility, interim response action

Energy Technology Data Exchange (ETDEWEB)

1991-02-25

From April through August 1989, a bench-/pilot-scale testing program was conducted to evaluate whether qualified manufactures of ultraviolet (UV)/chemical oxidation equipment could reduce the concentrations of hydrazine fuel compounds (hydrazine, monomethyl hydrazine (MMH), and unsymmetrical dimethyl hydrazine (UDMH)) and n-nitrosodimethylamine (NDMA) in the wastewater to action levels identified in the Final Decision Document. A secondary objective of this testing program was to generate design and operational information for use during the full-scale startup program.
Final repositories for high-level radioactive waste; Endlagerung hochradioaktiver Abfaelle

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-10-15

The brochure on final repositories for high-level radioactive waste covers the following issues: What is the origin of radioactive wastes? How large are the waste amounts? What is going to happen with the wastes? What is the solution for the Waste disposal? A new site search is started. Safety requirements for the final disposal of high-level radioactive wastes. Comparison of host rocks. Who is responsible and who will pay? Final disposal of high-level radioactive wastes worldwide. Short summary: History of the search for a final repository for high-level radioactive wastes in Germany.
A full-scale biological aerated filtration system application in the ...

African Journals Online (AJOL)

owner

tanks, gravel filter and finally sand anthracite (3:1 by volume) filter. ... sedimentation of the wastewater for six hours reduced the COD, BOD, and ... suspended solids, pigments color and oil and grease. ... The sludge was been dredged every.
Optimización del mantenimiento preventivo, utilizando las técnicas de diagnóstico integral. Resultados finales y evaluación económica; Optimization of the Preventive Maintenance Using the Techniques of Integral Diagnosis. Final Results and Economic Evalua

Directory of Open Access Journals (Sweden)

Pedro L Hernández Domínguez

2011-02-01

Full Text Available En este trabajo se obtienen los resultados finales y la evaluación económica de la aplicación de la metodologíaque aporta el diagnóstico integral (DI, presentada por los autores en los artículos anteriores, con la finalidad deintroducir el mantenimiento basado en la condición (MBC como una forma de mejoramiento o perfeccionamientodel mantenimiento preventivo planificado (MPP que se desarrolla en las centrales termoeléctricas (CCTT cubanas. In this paper, the authors obtained the final results and the economic evaluation of the application methodologythat contributes the integral diagnosis (ID, presented by they in a previous articles, with the purpose of introducingthe condition based maintenance (CBM like a form of improvement the Planned Preventive Maintenance(PPM that is developed in the cuban thermoelectric power stations.
Upper full arch rehabilitation with sinus by-pass with tilted implants via tapered-threaded expanders in low density bone: a clinical trial.

Science.gov (United States)

Andreasi Bassi, M; Andrisani, C; Lico, S; Ormanier, Z; Arcuri, C

2016-01-01

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants, in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors present a case series of full-arch rehabilitations performed with this procedure named: Tilted Implant Expansion Osteotomy (TIEO). 12 patients (5 males and 7 females, average age 58.5 ± 8.1 years) with totally or partially edentulous maxilla were enrolled in this study. For each patient 4 implants were placed, the anterior implants in the area of lateral incisors or canines while, the posterior implants, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 48 cylindrical two-piece implants were placed, 24 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 6 months, the second stage surgery was performed. The cases were finalized by means of a hybrid metal-acrylic prosthesis. The post finalization follow-up was at 12 months. Survival rate was 100% since none fixtures were lost. At the one-year follow up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for full-arch rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.
Tribal child welfare. Interim final rule.

Science.gov (United States)

2012-01-06

The Administration for Children and Families (ACF) is issuing this interim final rule to implement statutory provisions related to the Tribal title IV-E program. Effective October 1, 2009, section 479B(b) of the Social Security Act (the Act) authorizes direct Federal funding of Indian Tribes, Tribal organizations, and Tribal consortia that choose to operate a foster care, adoption assistance and, at Tribal option, a kinship guardianship assistance program under title IV-E of the Act. The Fostering Connections to Success and Increasing Adoptions Act of 2008 requires that ACF issue interim final regulations which address procedures to ensure that a transfer of responsibility for the placement and care of a child under a State title IV-E plan to a Tribal title IV-E plan occurs in a manner that does not affect the child's eligibility for title IV-E benefits or medical assistance under title XIX of the Act (Medicaid) and such services or payments; in-kind expenditures from third-party sources for the Tribal share of administration and training expenditures under title IV-E; and other provisions to carry out the Tribal-related amendments to title IV-E. This interim final rule includes these provisions and technical amendments necessary to implement a Tribal title IV-E program.
Full-Color Plasmonic Metasurface Holograms.

Science.gov (United States)

Wan, Weiwei; Gao, Jie; Yang, Xiaodong

2016-12-27

Holography is one of the most attractive approaches for reconstructing optical images, due to its capability of recording both the amplitude and phase information on light scattered from objects. Recently, optical metasurfaces for manipulating the wavefront of light with well-controlled amplitude, phase, and polarization have been utilized to reproduce computer-generated holograms. However, the currently available metasurface holograms have only been designed to achieve limited colors and record either amplitude or phase information. This fact significantly limits the performance of metasurface holograms to reconstruct full-color images with low noise and high quality. Here, we report the design and realization of ultrathin plasmonic metasurface holograms made of subwavelength nanoslits for reconstructing both two- and three-dimensional full-color holographic images. The wavelength-multiplexed metasurface holograms with both amplitude and phase modulations at subwavelength scale can faithfully produce not only three primary colors but also their secondary colors. Our results will advance various holographic applications.
Cohesion between two clay lamellae: From Primitive Model to Full Molecular Simulation

International Nuclear Information System (INIS)

Carrier, Benoit; Vandamme, Matthieu; Pellenq, Roland; Van Damme, Henri

2012-01-01

reference. Then, starting from DLVO model we increase the complexity in a step-wise fashion: Molecularity of the counter-ions, molecularity of the solvent and finally full atomistic description of water and of the clay lamellae. For each system, we generate a family of slit pores of various widths and we run Monte-Carlo and Molecular Dynamics simulations. We present the ionic profiles and the pressure between the charged lamellae for each model. In particular, we investigate the influence of the amplitude of the electrostatic coupling. We also compute the dielectric constant of water for the Explicit Solvent Primitive Model and for the full molecular model and show for which systems assuming inter-layer water to behave like bulk water is a relevant hypothesis. (authors)
Evidence for use of intraoral scanners under clinical conditions for obtaining full-arch digital impressions is insufficient.

Science.gov (United States)

Khraishi, Hadil; Duane, Brett

2017-03-01

Data sourcesPubMed, Scopus, Cochrane Library, Web of Science, Embase. Relevant papers were also searched from the reference lists of selected studies. A web search of current manufacturers of intraoral scanners.Study selectionStudies with full-arch digital impressions recorded intraorally that tested any of the following outcomes; validity, repeatability, reproducibility, time efficiency. Patient acceptance of digital impressions were considered for the review.Data extraction and synthesisInitially, only titles of the papers identified from the databases were screened, then further screening of the abstracts of the selected titles was carried out. Then finally, full text articles of the selected abstracts were read and only relevant articles were included in the review. Two examiners assessed the quality of the chosen articles using the QUADAS checklist. Any disagreement was resolved by discussion between the two examiners.ResultsOnly eight studies were found that carried out full-arch intraoral scanning. Four studies reported on validity, repeatability and reproducibility of digital measurements. These studies were included in the qualitative assessment. Two intraoral scanners were tested, Lava COS and iTero. In assessing scanning times and patient perception, six and four studies were included, respectively. A decrease in the scanning time was noted as the operator gained experience.ConclusionsThe literature lacks sufficient evidence to comment on the use of intraoral scanners under clinical conditions. Further studies are needed to properly assess the reliability, accuracy, reproducibility and scanning times of intraoral scans.
Exclusive B Decays to Charmonium Final States

Energy Technology Data Exchange (ETDEWEB)

Barrera, Barbara

2000-10-13

We report on exclusive decays of B mesons into final states containing charmonium using data collected with the BABAR detector at the PEP-II storage rings. The charmonium states considered here are J/{psi}, {psi}(2S), and {chi}{sub c1}. Branching fractions for several exclusive final states, a measurement of the decay amplitudes for the B{sup 0} {yields} J/{psi} K* decay, and measurements of the B{sup 0} and B{sup +} masses are presented. All of the results we present here are preliminary.
KEWB facilities decontamination and disposition. Final report

International Nuclear Information System (INIS)

Ureda, B.F.

1976-01-01

The decontamination and disposition of the KEWB facilities, Buildings 073, 643, 123, and 793, are complete. All of the facility equipment, including reactor enclosure, reactor vessel, fuel handling systems, controls, radioactive waste systems, exhaust systems, electrical services, and protective systems were removed from the site. Buildings 643, 123, and 793 were completely removed, including foundations. The floor and portions of the walls of Building 073 were covered over by final grading. Results of the radiological monitoring and the final survey are presented. 9 tables, 19 figures
Study on the ultrasonic inspection method using the full matrix capture for the in service railway wheel

Energy Technology Data Exchange (ETDEWEB)

Peng, Jianping; Wang, Li; Zhang, Yu; Gao, Xiaorong; Wang, Zeyong; Peng, Chaoyong [NDT Research Center, School of Physical Science and Technology, Southwest Jiaotong University, Chengdu 610031 (China)

2014-02-18

The quality of wheel is especially important for the safety of high speed railway. In this paper, a new ultrasonic array inspection method, the Full Matrix Capture (FMC) has been studied and applied to the high speed railway wheel inspection, especially in the wheel web from the tread. Firstly, the principle of FMC and TFM algorithm is discussed, and then the new optimization is applied to the standard FMC; Secondly the fundamentals of optimization is described in detail and the performance is analyzed. Finally, the experiment has been built with a standard phased array block and railway wheel, and then the testing results are discussed and analyzed. It is demonstrated that this change for the ultrasonic data acquisition and image reconstruction has higher efficiency and lower cost comparing to the FMC's procedure.
Global-Mode Analysis of Full-Disk Data from the Michelson Doppler Imager and the Helioseismic and Magnetic Imager

Science.gov (United States)

Larson, Timothy P.; Schou, Jesper

2018-02-01

Building upon our previous work, in which we analyzed smoothed and subsampled velocity data from the Michelson Doppler Imager (MDI), we extend our analysis to unsmoothed, full-resolution MDI data. We also present results from the Helioseismic and Magnetic Imager (HMI), in both full resolution and processed to be a proxy for the low-resolution MDI data. We find that the systematic errors that we saw previously, namely peaks in both the high-latitude rotation rate and the normalized residuals of odd a-coefficients, are almost entirely absent in the two full-resolution analyses. Furthermore, we find that both systematic errors seem to depend almost entirely on how the input images are apodized, rather than on resolution or smoothing. Using the full-resolution HMI data, we confirm our previous findings regarding the effect of using asymmetric profiles on mode parameters, and also find that they occasionally result in more stable fits. We also confirm our previous findings regarding discrepancies between 360-day and 72-day analyses. We further investigate a six-month period previously seen in f-mode frequency shifts using the low-resolution datasets, this time accounting for solar-cycle dependence using magnetic-field data. Both HMI and MDI saw prominent six-month signals in the frequency shifts, but we were surprised to discover that the strongest signal at that frequency occurred in the mode coverage for the low-resolution proxy. Finally, a comparison of mode parameters from HMI and MDI shows that the frequencies and a-coefficients agree closely, encouraging the concatenation of the two datasets.
Plate Full of Color

Centers for Disease Control (CDC) Podcasts

2008-08-04

The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Plate Full of Color teaches the value of eating a variety of colorful and healthy foods. Created: 8/4/2008 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP). Date Released: 8/5/2008.
7 CFR 1980.308 - Full faith and credit.

Science.gov (United States)

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Full faith and credit. 1980.308 Section 1980.308...) PROGRAM REGULATIONS (CONTINUED) GENERAL Rural Housing Loans § 1980.308 Full faith and credit. The loan note guarantee constitutes an obligation supported by the full faith and credit of the United States...
Full scale demonstration of air-purifying pavement

NARCIS (Netherlands)

Ballari, M.; Brouwers, H.J.H.

2013-01-01

Experiments concerning a full-scale demonstration of air purifying pavement in Hengelo, The Netherlands, are reported. The full width of the street was provided with concrete pavement containing TiO2 over a length of 150 m ("DeNOx street"). Another part of the street, about 100 m, was paved with
IRIS Toxicological Review of Trichloroacetic Acid (Tca) (Final Report)

Science.gov (United States)

EPA has finalized the Toxicological Review of Trichloroacetic Acid: in support of the Integrated Risk Information System (IRIS). Now final, this assessment may be used by EPA’s program and regional offices to inform decisions to protect human health.
On the Specification of Full Contracts

DEFF Research Database (Denmark)

Okika, Joseph; Ravn, Anders Peter; Fenech, Stephen

2009-01-01

Contracts specify properties of an interface to a software component. We consider the problem of de ning a full contract that speci es not only the normal behaviour, but also special cases and tolerated exceptions. In this paper we focus on the behavioural properties of use cases taken from...... the Common Component Modelling Example (CoCoME), proposed as a benchmark to compare di erent component models. We rst give the full speci cation of the use cases in the deontic-based speci cation language CL, and then we concentrate on three particular properties in order to compare deontic and operational...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.