WorldWideScience

Sample records for filtration electronically safettm

  1. Filtration Fundamentals.

    Science.gov (United States)

    Ward, Ken; Hunsaker, Scot

    1997-01-01

    Examines how choice of commercial swimming-pool filtration systems is driven by the project-specific needs of the pools. Also highlighted are definitions of specific terms used when discussing filtration systems. Questions that pool designers can answer to make filtration-system purchasing decisions are listed. (GR)

  2. Monitoring of biological odour filtration in closed environments with olfactometry and an electronic nose

    NARCIS (Netherlands)

    Willers, H.C.; Gijsel, de P.; Ogink, N.W.M.; Amico, D' A.; Martinelli, E.; Natale, Di C.; Ras, van N.; Waarde, van der J.

    2004-01-01

    Air treatment with a compact biological membrane filter, and air quality monitoring with an electronic nose were tested in the laboratory on air from a cage containing six mice. Additional analyses of air to and from the filter were performed using olfactometry and ammonia and hydrogen sulphide gas

  3. Electron microscopic time-lapse visualization of surface pore filtration on particulate matter trapping process.

    Science.gov (United States)

    Sanui, Ryoko; Hanamura, Katsunori

    2016-09-01

    A scanning electron microscope (SEM) was used to dynamically visualize the particulate matter (PM) trapping process on diesel particulate filter (DPF) walls at a micro scale as 'time-lapse' images corresponding to the increase in pressure drop simultaneously measured through the DPF. This visualization and pressure drop measurement led to the conclusion that the PM trapping in surface pores was driven by PM bridging and stacking at constricted areas in porous channels. This caused a drastic increase in the pressure drop during PM accumulation at the beginning of the PM trapping process. The relationship between the porous structure of the DPF and the depth of the surface pore was investigated in terms of the porosity distribution and PM penetration depth near the wall surface with respect to depth. The pressure drop calculated with an assumed surface pore depth showed a good correspondence to the measured pressure drop.

  4. Characterizing black carbon in rain and ice cores using coupled tangential flow filtration and transmission electron microscopy

    Directory of Open Access Journals (Sweden)

    A. Ellis

    2015-06-01

    Full Text Available Antarctic ice cores have been used to study the history of black carbon (BC, but little is known with regards to the physical and chemical characteristics of these particles in the remote atmosphere. Characterization remains limited by ultra-trace concentrations in ice core samples and the lack of adequate methods to isolate the particles unaltered from the melt water. To investigate the physical and chemical characteristics of these particles, we have developed a tangential flow filtration (TFF method combined with transmission electron microscopy (TEM. Tests using ultrapure water and polystyrene latex particle standards resulted in excellent blanks and significant particle recovery. This approach has been applied to melt water from Antarctic ice cores as well as tropical rain from Darwin, Australia with successful results: TEM analysis revealed a variety of BC particle morphologies, insoluble coatings, and the attachment of BC to mineral dust particles. The TFF-based concentration of these particles has proven to give excellent results for TEM studies of BC particles in Antarctic ice cores and can be used for future studies of insoluble aerosols in rainwater and ice core samples.

  5. Shortening filtrations

    Institute of Scientific and Technical Information of China (English)

    ENOCHS Edgar E.

    2012-01-01

    Let C be a set of modules.We argue that there is an ordinal κ such that if a module has a filtration by modules in C,then it has a filtration of length κ by direct sums of modules in C.As an application we give another way to prove a result of Saorín and (S)(t)oví(c)ek and of (S)(t)oví(c)ek.

  6. GSPEL - Air Filtration Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Evaluation capabilities for air filtration devices The Air Filtration Lab provides testing of air filtration devices to demonstrate and validate new or legacy system...

  7. GSPEL - Air Filtration Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Evaluation capabilities for air filtration devicesThe Air Filtration Lab provides testing of air filtration devices to demonstrate and validate new or legacy system...

  8. Preventing colloidal fouling in reverse osmosis and nano filtration system. Application of electron beam surface analysis; Prevencion del ensuciamiento coloidal en sistemas de osmosis inversa y nanofiltracion. Aplicacion del analisis de superficies con haces de electrones.

    Energy Technology Data Exchange (ETDEWEB)

    Sanz Ataz, J.; Guerrero Gallego, L.; Taberna Camprubi, E.; Pena Garcia, N.M; Carulla Contreras, C.; Blavia Bergos, J.

    2003-07-01

    Particulate matter in natural waters and wastewaters can cause fouling in reverse osmosis and nano filtration membranes. Common foulants includes organic and inorganic colloids; hydrous aluminum and iron silicates, silt, iron and manganese oxides, calcium carbonate, microorganisms, polysaccharides, lipoproteins, biological debris, etc. Predicting fouling of dispersed materials on membrane surface and brine flow channels uses the silt density index (SDI) and modified fouling index (MFI). Scanning electron microscopy (SEM) coupled with energy X-ray microanalysis (EDX) of SDI filters contributes to obtain information about shape, size and chemical composition of foulants and cake layer. (Author) 6 refs.

  9. Glomerular filtration rate

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/007305.htm Glomerular filtration rate To use the sharing features on this page, please enable JavaScript. Glomerular filtration rate (GFR) is a test used to check ...

  10. Rotary filtration system

    Science.gov (United States)

    Herman, David T.; Maxwell, David N.

    2011-04-19

    A rotary filtration apparatus for filtering a feed fluid into permeate is provided. The rotary filtration apparatus includes a container that has a feed fluid inlet. A shaft is at least partially disposed in the container and has a passageway for the transport of permeate. A disk stack made of a plurality of filtration disks is mounted onto the shaft so that rotation of the shaft causes rotation of the filtration disks. The filtration disks may be made of steel components and may be welded together. The shaft may penetrate a filtering section of the container at a single location. The rotary filtration apparatus may also incorporate a bellows seal to prevent leakage along the shaft, and an around the shaft union rotary joint to allow for removal of permeate. Various components of the rotary filtration apparatus may be removed as a single assembly.

  11. Magnetic-seeding filtration

    Energy Technology Data Exchange (ETDEWEB)

    Ying, T.Y.; Chin, C.J.; Lu, S.C.; Yiacoumi, S. [Georgia Institute of Technology, Atlanta, GA (United States). School of Civil and Environmental Engineering] [and others

    1997-10-01

    Magnetic-seeding filtration consists of two steps: heterogeneous particle flocculation of magnetic and nonmagnetic particles in a stirred tank and high-gradient magnetic filtration (HGMF). The effects of various parameters affecting magnetic-seeding filtration (HGMF). The effects of various parameters affecting magnetic seeding filtration are theoretically and experimentally investigated. A trajectory model that includes hydrodynamic resistance, van der Waals, and electrostatic forces is developed to calculate the flocculation frequency in a turbulent-shear regime. Fractal dimension is introduced to simulate the open structure of aggregates. A magnetic-filtration model that consists of trajectory analysis, a particle build-up model, a breakthrough model, and a bivariate population-balance model is developed to predict the breakthrough curve of magnetic-seeding filtration. A good agreement between modeling results and experimental data is obtained. The results show that the model developed in this study can be used to predict the performance of magnetic-seeding filtration without using empirical coefficients or fitting parameters. 35 refs., 7 figs., 1 tab.

  12. Filtration in Porous Media

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander

    There is a considerable and ongoing effort aimed at understanding the transport and the deposition of suspended particles in porous media, especially non-Fickian transport and non-exponential deposition of particles. In this work, the influential parameters in filtration models are studied...... to understand their effects on the non-Fickian transport and the non-exponential deposition. The filtration models are validated by the comparisons between the modelling results and the experimental data.The elliptic equation with distributed filtration coefficients may be applied to model non-Fickian transport...... and hyperexponential deposition. The filtration model accounting for the migration of surface associated particles may be applied for non-monotonic deposition....

  13. Water Filtration Products

    Science.gov (United States)

    1986-01-01

    American Water Corporation manufactures water filtration products which incorporate technology originally developed for manned space operations. The formula involves granular activated charcoal and other ingredients, and removes substances by catalytic reactions, mechanical filtration, and absorption. Details are proprietary. A NASA literature search contributed to development of the compound. The technology is being extended to a deodorizing compound called Biofresh which traps gas and moisture inside the unit. Further applications are anticipated.

  14. Visualization of water flow during filtration using flat filtration materials

    Directory of Open Access Journals (Sweden)

    Hrůza Jakub

    2012-04-01

    Full Text Available Filtration materials are very important elements of some industrial appliances. Water filtration is a separation of solid materials from fluid. Solid particles are captured on the frontal area of the filtration textile and only liquid passes through it. It is important to know the filtration process in a detailed way to be able to develop filtration materials. Visualization of filtration process enables a better view of the filtration. This method also enables to determine efficiency and homogeneity of filtration using image analysis. For this purpose, a new waterfiltration measuring setup was proposed and constructed. Filtration material is mounted into the optically transparent place in the setup. Laser sheet is directed into this place as in the case of Particle Image Velocimetry measuring method. Monochrome and sensitive camera records the light scattered by seeding particles in water. The seeding particles passing through the filter serve for measuring filtration efficiency, and also for visualization of filtration process. Filtration setup enables to measure also the pressure drop and a flow. The signals are processed by National Instruments compactDAQ system and UMA software. Microfibrous and nanofibrous filtration materials are tested by this measuring method. In the case of nanofibrous filtration, appropriate size of seeding particles is needed to be used to perform a process of filtration.

  15. Microfluidic colloid filtration

    Science.gov (United States)

    Linkhorst, John; Beckmann, Torsten; Go, Dennis; Kuehne, Alexander J. C.; Wessling, Matthias

    2016-03-01

    Filtration of natural and colloidal matter is an essential process in today’s water treatment processes. The colloidal matter is retained with the help of micro- and nanoporous synthetic membranes. Colloids are retained in a “cake layer” – often coined fouling layer. Membrane fouling is the most substantial problem in membrane filtration: colloidal and natural matter build-up leads to an increasing resistance and thus decreasing water transport rate through the membrane. Theoretical models exist to describe macroscopically the hydrodynamic resistance of such transport and rejection phenomena; however, visualization of the various phenomena occurring during colloid retention is extremely demanding. Here we present a microfluidics based methodology to follow filter cake build up as well as transport phenomena occuring inside of the fouling layer. The microfluidic colloidal filtration methodology enables the study of complex colloidal jamming, crystallization and melting processes as well as translocation at the single particle level.

  16. CENTRIFUGAL MEMBRANE FILTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Daniel J. Stepan; Bradley G. Stevens; Melanie D. Hetland

    1999-10-01

    The overall project consists of several integrated research phases related to the applicability, continued development, demonstration, and commercialization of the SpinTek centrifugal membrane filtration process. Work performed during this reporting period consisted of Phase 2 evaluation of the SpinTek centrifugal membrane filtration technology and Phase 3, Technology Partnering. During Phase 1 testing conducted at the EERC using the SpinTek ST-IIL unit operating on a surrogate tank waste, a solids cake developed on the membrane surface. The solids cake was observed where linear membrane velocities were less than 17.5 ft/s and reduced the unobstructed membrane surface area up to 25%, reducing overall filtration performance. The primary goal of the Phase 2 research effort was to enhance filtration performance through the development and testing of alternative turbulence promoter designs. The turbulence promoters were designed to generate a shear force across the entire membrane surface sufficient to maintain a self-cleaning membrane capability and improve filtration efficiency and long-term performance. Specific Phase 2 research activities included the following: System modifications to accommodate an 11-in.-diameter, two-disk rotating membrane assembly; Development and fabrication of alternative turbulence promoter designs; Testing and evaluation of the existing and alternative turbulence promoters under selected operating conditions using a statistically designed test matrix; and Data reduction and analysis; The objective of Phase 3 research was to demonstrate the effectiveness of SpinTek's centrifugal membrane filtration as a pretreatment to remove suspended solids from a liquid waste upstream of 3M's WWL cartridge technology for the selective removal of technetium (Tc).

  17. Magnetic-seeding filtration

    Energy Technology Data Exchange (ETDEWEB)

    Depaoli, D. [Oak Ridge National Lab., TN (United States)

    1996-10-01

    This task will investigate the capabilities of magnetic-seeding filtration for the enhanced removal of magnetic and nonmagnetic particulates from liquids. This technology appies to a wide range of liquid wastes, including groundwater, process waters, and tank supernatant. Magnetic-seeding filtration can be used in several aspects of treatment, such as (1) removal of solids, particularly those in the colloidal-size range that are difficult to remove by conventional means; (2) removal of contaminants by precipitation processes; and (3) removal of contaminants by sorption processes.

  18. Filtration by eyelashes

    Science.gov (United States)

    Vistarakula, Krishna; Bergin, Mike; Hu, David

    2010-11-01

    Nearly every mammalian and avian eye is rimmed with lashes. We investigate experimentally the ability of lashes to reduce airborne particle deposition in the eye. We hypothesize that there is an optimum eyelash length that maximizes both filtration ability and extent of peripheral vision. This hypothesis is tested using a dual approach. Using preserved heads from 36 species of animals at the American Museum of Natural History, we determine the relationship between eye size and eyelash geometry (length and spacing). We test the filtration efficacy of these geometries by deploying outdoor manikins and measuring particle deposition rate as a function of eyelash length.

  19. Enlargements of filtrations and applications

    CERN Document Server

    Corcuera, J M

    2012-01-01

    In this paper we review some old and new results about the enlargement of filtrations problem, as well as their applications to credit risk and insider trading problems. The enlargement of filtrations problem consists in the study of conditions under which a semimartingale remains a semimartingale when the filtration is enlarged, and, in such a case, how to find the Doob-Meyer decomposition. Filtrations may be enlarged in different ways. In this paper we consider initial and progressive filtration enlargements made by random variables and processes. Keywords: Credit Risk, Insider Trading, Enlargement of Filtrations

  20. Water Treatment Technology - Filtration.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on filtration provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purposes of sedimentation basins and flocculation…

  1. 电子商务推荐系统的数据过滤%Data Filtrating for Recommendation System in Electronic Commerce

    Institute of Scientific and Technical Information of China (English)

    杨静

    2012-01-01

    This paper takes attention to descent of recommending quantity that is resulted in the extreme increase of user and product. Bases on the analysis of the system workflow, it combines sample algorithm and lookahead algorithm for data filtrating, and then builds system's flame-work. Then the algorithm is put into experiment, with much higher recommendation quality and much better performance.%着眼于用户和商品数据的急剧增加,所造成的电子商务推荐系统推荐质量下降的问题。在分析了系统工作流程的基础上,选择抽样算法结合前瞻算法进行数据过滤,进而据此构建系统结构框架。实验结果显示,系统推荐结果的质量和系统的性能确有较大提高。

  2. Drug Dosing in Patients with Renal Insufficiency in a Hospital Setting using Electronic Prescribing and Automated Reporting of Estimated Glomerular Filtration Rate

    DEFF Research Database (Denmark)

    Nielsen, Anita L.; Henriksen, Daniel Pilsgaard; Marinakis, Christianna;

    2014-01-01

    . We conclude that despite implementation of electronic prescribing and automated reporting of eGFR, patients with renal insufficiency may still be exposed to inappropriate drug use, with potential increased risk of adverse effects. Initiatives to reduce medication errors such as the use of electronic......GFR in the range of 10-49 ml/min/1.73m(2) were included. We identified 436 episodes with administration of renal risk drugs (prescribed to 183 patients): 410 drugs required dose adjustment according to the eGFR and 26 should be avoided. In total, the use or dosing of 66 (15%) of the 436 renal risk drugs...

  3. Dynamic optical filtration

    Science.gov (United States)

    Chretien, Jean-Loup (Inventor); Lu, Edward T. (Inventor)

    2005-01-01

    A dynamic optical filtration system and method effectively blocks bright light sources without impairing view of the remainder of the scene. A sensor measures light intensity and position so that selected cells of a shading matrix may interrupt the view of the bright light source by a receptor. A beamsplitter may be used so that the sensor may be located away from the receptor. The shading matrix may also be replaced by a digital micromirror device, which selectively sends image data to the receptor.

  4. Magnetic flocculation and filtration

    Energy Technology Data Exchange (ETDEWEB)

    Yiacoumi, Sotira; Chin, Ching-Ju; Yin, Tung-Yu [Georgia Inst. of Tech., Atlanta, GA (United States). School of Civil and Environmental Engineering; Tsouris, C., DePaoli, D.W.; Chattin, M.R.; Spurrier, M. [Oak Ridge National Lab., TN (United States)

    1996-10-01

    A model is available in predicting flocculation frequencies between particles of various properties under the influence of a magnetic field. This model provides a basic understanding of fundamental phenomena, such as particle-particle and particle-collector interactions, occurring in HGMF (high gradient magnetic field), and will be extended to describe experimental data of particle flocculation and filtration and predict the performance of high- gradient magnetic filters. It is also expected that this model will eventually lead to a tool for design and optimization of magnetic filters for environmental, metallurgical, biochemical, and other applications.

  5. Magnetic-seeding filtration

    Energy Technology Data Exchange (ETDEWEB)

    DePaoli, D.W.; Tsouris, C. [Oak Ridge National Lab., TN (United States); Yiacoumi, Sotira

    1997-10-01

    Magnetic-seeding filtration is a technology under development for the enhanced removal of magnetic and non-magnetic particulates from liquids. This process involves the addition of a small amount of magnetic seed particles (such as naturally occurring iron oxide) to a waste suspension, followed by treatment with a magnetic filter. Non-magnetic and weakly magnetic particles are made to undergo nonhomogeneous flocculation with the seed particles, forming flocs of high magnetic susceptibility that are readily removed by a conventional high-gradient magnetic filter. This technology is applicable to a wide range of liquid wastes, including groundwater, process waters, and tank supernatants. Magnetic-seeding filtration may be used in several aspects of treatment, such as (1) removal of solids, particularly those in the colloidal size range that are difficult to remove by conventional means; (2) removal of contaminants by precipitation processes; and (3) removal of contaminants by sorption processes. Waste stream characteristics for which the technology may be applicable include (1) particle sizes ranging from relatively coarse (several microns) to colloidal particles, (2) high or low radiation levels, (3) broad-ranging flow rates, (4) low to moderate solids concentration, (5) cases requiring high decontamination factors, and (6) aqueous or non-aqueous liquids. At this point, the technology is at the bench-scale stage of development; laboratory studies and fundamental modeling are currently being employed to determine the capabilities of the process.

  6. Modus of filtration.

    Science.gov (United States)

    Meltzer, Theodore H

    2006-01-01

    Experience teaches that particles larger than the pores of a filter cannot negotiate its passage. Other retention mechanisms are less obvious than sieve retention or size exclusion. They are electrical in nature, and find expression in the bonding alliances that mutually attract (or repel) filters and particles. The influence of hydrogen bonds, of van der Waals forces, of hydrophobic adsorptions, and of transient polarities on particle retentions are set forth in terms of the double electrical layer concept that also governs colloidal destabilizations. The origins of differences in membrane porosities is explained, as also the importance of the filtration conditions. The singularity of the particle-fluid-filter relationship on organism and/or pore size alteration is stressed.

  7. Filtration properties of nonwovens.

    Science.gov (United States)

    Gador, W; Jankowska, E

    1999-01-01

    This paper presents the results and conclusions from experimental investigations concerning filtration properties of nonwovens. The needled nonwovens were made from polyester fibres (PTE) with average fibre diameter 12 micrometres and polypropylene fibres (PP) with average fibre diameter 32 micrometres. Nonwovens were produced out of each of those fibres or out of a mixture of polyester and polypropylene fibres. This paper also presents investigations of nonwoven fabric made of polypropylene fibres (PP) with average fibre diameter 2.6 micrometres, which was formed according to melt-blown technology. Oil mist, as challenge aerosol, was used to evaluate the performance of filter media at various aerosol velocities. The average oil mist test aerosol particle diameter was 0.3 micrometre. Filter penetration was measured at oil mist concentration 0.24 g/m(3).

  8. Air filtration in HVAC systems

    CERN Document Server

    Ginestet, Alain; Tronville, Paolo; Hyttinen, Marko

    2010-01-01

    Air filtration Guidebook will help the designer and user to understand the background and criteria for air filtration, how to select air filters and avoid problems associated with hygienic and other conditions at operation of air filters. The selection of air filters is based on external conditions such as levels of existing pollutants, indoor air quality and energy efficiency requirements.

  9. Filtrating forms of soil bacteria

    Science.gov (United States)

    Van'kova, A. A.; Ivanov, P. I.; Emtsev, V. T.

    2013-03-01

    Filtrating (ultramicroscopic) forms (FF) of bacteria were studied in a soddy-podzolic soil and the root zone of alfalfa plants as part of populations of the most widespread physiological groups of soil bacteria. FF were obtained by filtering soil solutions through membrane filters with a pore diameter of 0.22 μm. It was established that the greater part of the bacteria in the soil and in the root zone of the plants has an ultramicroscopic size: the average diameter of the cells is 0.3 μm, and their length is 0.6 μm, which is significantly less than the cell size of banal bacteria. The number of FF varies within a wide range depending on the physicochemical conditions of the habitat. The FF number's dynamics in the soil is of a seasonal nature; i.e., the number of bacteria found increases in the summer and fall and decreases in the winter-spring period. In the rhizosphere of the alfalfa, over the vegetation period, the number of FF and their fraction in the total mass of the bacteria increase. A reverse tendency is observed in the rhizoplane. The morphological particularities (identified by an electron microscopy) and the nature of the FF indicate their physiological activity.

  10. Problems of multiphase fluid filtration

    CERN Document Server

    Konovalov, AN

    1994-01-01

    This book deals with a spectrum of problems related to the mathematical modeling of multiphase filtration. Emphasis is placed on an inseparable triad: model - algorithm - computer code. An analysis of new and traditional filtration problems from the point of view of both their numerical implementation and the reproduction of one or another technological characteristics of the processes under consideration is given. The basic principles which underlie the construction of efficient numerical methods taking into account the filtration problems are discussed: non-evolutionary nature, degeneration,

  11. Some aspects of applying nanostructured materials in air filtration, water filtration and electrical engineering

    Science.gov (United States)

    Kimmer, Dusan; Vincent, Ivo; Lovecka, Lenka; Kazda, Tomas; Giurg, Adam; Skorvan, Ondrej

    2017-05-01

    Nanostructures prepared from nanofibres and nanostructured composites prepared from nanofibres and fillers are gradually becoming increasingly demanded materials for applications in various industrial branches connected with catalysis, environment protection (air filtration, waste water treatment, sound absorption), in biological engineering, electronics (battery separators, electrode materials), etc. Selected applications of these materials prepared in the company SPUR a.s. are summed up in the following presentation.

  12. Latest aspects of mechanical filtration

    Directory of Open Access Journals (Sweden)

    Stanislav Koláček

    2013-01-01

    Full Text Available The aim of this study was to describe and unify all knowledge about mechanic filtration. The first part deals with the parameters and properties of filtration. Here some important basic concepts are explained such as pressure gradient, filter life, etc. There’s also a description of convenient filtration technology for coarse and fine materials, such as sand, smoke or soot. The second part primarily focuses on the real use and application of filters for liquid and gaseous media. The differences in construction between different types of filters for filtration of fuels, oils, hydraulic fluids, air and cabin filters are described. The last section is focused mainly on new materials for the production of filters. These materials are ceramic or nanomaterials, which can actually be enriched for example with antibacterial silver or some fungicides.

  13. Health benefits of particle filtration.

    Science.gov (United States)

    Fisk, W J

    2013-10-01

    The evidence of health benefits of particle filtration in homes and commercial buildings is reviewed. Prior reviews of papers published before 2000 are summarized. The results of 16 more recent intervention studies are compiled and analyzed. Also, reviewed are four studies that modeled health benefits of using filtration to reduce indoor exposures to particles from outdoors. Prior reviews generally concluded that particle filtration is, at best, a source of small improvements in allergy and asthma health effects; however, many early studies had weak designs. A majority of recent intervention studies employed strong designs and more of these studies report statistically significant improvements in health symptoms or objective health outcomes, particularly for subjects with allergies or asthma. The percentage improvement in health outcomes is typically modest, for example, 7% to 25%. Delivery of filtered air to the breathing zone of sleeping allergic or asthmatic persons may be more consistently effective in improving health than room air filtration. Notable are two studies that report statistically significant improvements, with filtration, in markers that predict future adverse coronary events. From modeling, the largest potential benefits of indoor particle filtration may be reductions in morbidity and mortality from reducing indoor exposures to particles from outdoor air.

  14. Health Benefits of Particle Filtration

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.

    2013-10-01

    The evidence of health benefits of particle filtration in homes and commercial buildings is reviewed. Prior reviews of papers published before 2000 are summarized. The results of 16 more recent intervention studies are compiled and analyzed. Also reviewed are four studies that modeled health benefits of using filtration to reduce indoor exposures to particles from outdoors. Prior reviews generally concluded that particle filtration is, at best, a source of small improvements in allergy and asthma health effects; however, many early studies had weak designs. A majority of recent intervention studies employed strong designs and more of these studies report statistically significant improvements in health symptoms or objective health outcomes, particularly for subjects with allergies or asthma. The percentage improvement in health outcomes is typically modest, e.g., 7percent to 25percent. Delivery of filtered air to the breathing zone of sleeping allergic or asthmatic persons may be more consistently effective in improving health than room air filtration. Notable are two studies that report statistically significant improvements, with filtration, in markers that predict future adverse coronary events. From modeling, the largest potential benefits of indoor particle filtration may be reductions in morbidity and mortality from reducing indoor exposures to particles from outdoor air.

  15. Health Benefits of Particle Filtration

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.

    2013-10-01

    The evidence of health benefits of particle filtration in homes and commercial buildings is reviewed. Prior reviews of papers published before 2000 are summarized. The results of 16 more recent intervention studies are compiled and analyzed. Also, reviewed are four studies that modeled health benefits of using filtration to reduce indoor exposures to particles from outdoors. Prior reviews generally concluded that particle filtration is, at best, a source of small improvements in allergy and asthma health effects; however, many early studies had weak designs. A majority of recent intervention studies employed strong designs and more of these studies report statistically significant improvements in health symptoms or objective health outcomes, particularly for subjects with allergies or asthma. The percent age improvement in health outcomes is typically modest, for example, 7percent to 25percent. Delivery of filtered air to the breathing zone of sleeping allergic or asthmatic persons may be more consistently effective in improving health than room air filtration. Notable are two studies that report statistically significant improvements, with filtration, in markers that predict future adverse coronary events. From modeling, the largest potential benefits of indoor particle filtration may be reductions in morbidity and mortality from reducing indoor exposures to particles from outdoor air.

  16. Filtration and compression of organic materials

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Keiding, Kristian

    The conventional filtration theory has been based on filtrations of incompressible particles such as anatase, kaolin and clay. The filtration models have later been used for organic slurries but can often not explain the observed experimental data. At constant pressure, the filtrate volume does...

  17. 40 CFR 141.73 - Filtration.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Filtration. 141.73 Section 141.73... PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.73 Filtration. A public water system..., and does not meet all of the criteria in § 141.71 (a) and (b) for avoiding filtration, must...

  18. Cake creep during filtration of flocculated manure

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Keiding, Kristian

    the distribution of N and P on the fields. Filtration is a useful method for such a separation. Furthermore, chemicals can be added to flocculate the solids and thereby increase the filterability i.e. the specific filter-cake resistance can be reduced from 1015 m/kg to 1011 m/kg. Both the amount of added chemicals......, and the mixing procedure affect the result, and lab-scale experiments are often used to study how these pre-treatments influence the filtration process. However, the existing mathematical filtration models are based on filtration of inorganic particles and cannot simulate the filtration data obtained when manure...... that the discrepancy between the filtration theory and the observed filtration behaviour is due to a time-dependent collapse of the formed cake (creep). This can also explain the observed behaviour when flocculated manure is filtered. The filtration data can be simulated if cake creep is adopted in the filtration...

  19. PORE STRUCTURE CHARACTERISTICS OF DEPOSITS FORMED DURING FIBER BUNDLE MEDIA FILTRATION

    Institute of Scientific and Technical Information of China (English)

    Deying Wang; Ziqiu Shen

    2004-01-01

    Scanning electronic microscope was adopted to investigate the pore structure of deposits formed during polypropylene fiber bundle filtration. The effects of flocculants, cationic polyacrylamide and polyaluminumchloride, on the pore structure and filtration process were examined. It is found from experimental results that the filter deposit has a self-similarity pore structure, which can be described in fractal dimensions.

  20. Improving IAQ Via Air Filtration.

    Science.gov (United States)

    Monk, Brian

    1999-01-01

    Provides tips on using air filtration to control indoor air quality in educational facilities, including dedicated spaces with unique air quality conditions such as in libraries, museums and archival storage areas, kitchens and dining areas, and laboratories. The control of particulate contaminants, gaseous contaminants, and moisture buildup are…

  1. Filtration combustion: Smoldering and SHS

    Science.gov (United States)

    Matkowsky, Bernard J.

    1995-01-01

    Smolder waves and SHS (self-propagating high-temperature synthesis) waves are both examples of combustion waves propagating in porous media. When delivery of reactants through the pores to the reaction site is an important aspect of the process, it is referred to as filtration combustion. The two types of filtration combustion have a similar mathematical formulation, describing the ignition, propagation and extinction of combustion waves in porous media. The goal in each case, however, is different. In smoldering the desired goal is to prevent propagation, whereas in SHS the goal is to insure propagation of the combustion wave, leading to the synthesis of desired products. In addition, the scales in the two areas of application may well differ. For example, smoldering generally occurs at a relatively low temperature and with a smaller propagation velocity than SHS filtration combustion waves. Nevertheless, the two areas of application have much in common, so that mechanisms learned about in one application can be used to advantage in the other. In this paper we discuss recent results in the areas of filtration combustion.

  2. Demonstration of creep during filtration

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Bugge, Thomas Vistisen; Kirchheiner, Anders Løvenbalk

    The classical filtration theory assumes a unique relationship between the local filter cake porosity and the local effective pressure. For a number of compressible materials, it has however been observed that during the consolidation stage this may not be the case. It has been found that the prod......The classical filtration theory assumes a unique relationship between the local filter cake porosity and the local effective pressure. For a number of compressible materials, it has however been observed that during the consolidation stage this may not be the case. It has been found...... that the production of filtrate also depends on the characteristic time for the filter cake solids to deform. This is formulated in the Terzaghi-Voigt model in which a secondary consolidation is introduced. The secondary consolidation may be visualized by plots of the relative cake deformation (U) v.s. the square...... magnitude as the primary consolidation (defined by the hydraulic retardation), the creep phenomenon may occur during filtration. This will lead to Ruth's plots characterized by a concave with two (more or less) distinct slopes. The slopes are defined by the relationship between the porosity...

  3. Filtration Understanding: FY10 Testing Results and Filtration Model Update

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Richard C.; Billing, Justin M.; Burns, Carolyn A.; Peterson, Reid A.; Russell, Renee L.; Schonewill, Philip P.; Shimskey, Rick W.

    2011-04-04

    This document completes the requirements of Milestone 2-4, Final Report of FY10 Testing, discussed in the scope of work outlined in the EM31 task plan WP-2.3.6-2010-1. The focus of task WP 2.3.6 is to improve the U.S. Department of Energy’s (DOE’s) understanding of filtration operations for high-level waste (HLW) to improve filtration and cleaning efficiencies, thereby increasing process throughput and reducing the Na demand (through acid neutralization). Developing the cleaning/backpulsing requirements will produce much more efficient operations for both the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and the Savannah River Site (SRS), thereby significantly increasing throughput by limiting cleaning cycles. The scope of this work is to develop the understanding of filter fouling to allow developing this cleaning/backpulsing strategy.

  4. Effect of Nanofibers on Spore Penetration and Lunar Dust Filtration

    Directory of Open Access Journals (Sweden)

    Phil Gibson, Ph.D.

    2008-06-01

    Full Text Available The results of two separate studies on biological spore penetration and simulated lunar dust filtration illustrate the use of nanofibers in some nonstandard filtration applications (nanofibers are generally defined as having diameters of less than a micron. In the first study, a variety of microporous liners containing microfibers and nanofibers were combined with cotton-based fabrics in order to filter aerosolized spores. The aerosol penetration resistance of the nanofiber-lined fabrics was measured, and some analysis was conducted of where the particles are captured within the fabric layers. Testing was conducted with aerosolized living spores, in order to evaluate the efficacy of various fabric treatments on spore viability within the fabric layers after exposure. Reported are the results of studies on fabrics with and without a removable electrospun nanofiber liner, and the fate of the spores within the fabric layers. In the second study, non-instrumented filtration testing using simulated lunar dust determined the comparative filtration efficiency of various nonwoven filtration media. Nanofiber witness media, combined with scanning electron microscope images, showed that an electrospun nonwoven filter layer effectively filtered out all the large and fine particles of the simulated lunar dust.

  5. 40 CFR 141.173 - Filtration.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Filtration. 141.173 Section 141.173... PRIMARY DRINKING WATER REGULATIONS Enhanced Filtration and Disinfection-Systems Serving 10,000 or More People § 141.173 Filtration. A public water system subject to the requirements of this subpart that...

  6. Mobile surface water filtration system

    Directory of Open Access Journals (Sweden)

    Aashish Vatsyayan

    2012-09-01

    Full Text Available To design a mobile system for surface water filtrationMethodology: the filtration of surface impurities begins with their retraction to concentrated thickness using non ionising surfactants, then isolation using surface tension property and sedimentation of impurities in process chamber using electrocoagulation. Result:following studies done to determine the rate of spreading of crude oil on water a method for retraction of spread crude oil to concentrated volumes is developed involving addition of non -ionising surfactants in contrast to use of dispersants. Electrocoagulation process involves multiple processes taking place to lead to depositionof impurities such as oil, grease, metals. Studies of experiments conducted reveals parameters necessary for design of electrocoagulation process chamber though a holistic approach towards system designing is still required. Propeller theory is used in determining the required design of propeller and the desired thrust, the overall structure will finally contribute in deciding the choice of propeller.

  7. Centrifugal membrane filtration -- Task 9

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Energy and Environmental Research Center (EERC) has teamed with SpinTek Membrane Systems, Inc., the developer of a centrifugal membrane filtration technology, to demonstrate applications for the SpinTek technology within the US Department of Energy (DOE) Environmental management (EM) Program. The technology uses supported microporous membranes rotating at high rpm, under pressure, to separate suspended and colloidal solids from liquid streams, yielding a solids-free permeate stream and a highly concentrated solids stream. This is a crosscutting technology that falls under the Efficient Separations and Processing Crosscutting Program, with potential application to tank wastes, contaminated groundwater, landfill leachate, and secondary liquid waste streams from other remediation processes, including decontamination and decommissioning systems. Membrane-screening tests were performed with the SpinTek STC-X4 static test cell filtration unit, using five ceramic membranes with different pore size and composition. Based on permeate flux, a 0.25-{micro}m TiO{sub 2}/Al{sub 2}O{sub 3} membrane was selected for detailed performance evaluation using the SpinTek ST-IIL centrifugal membrane filtration unit with a surrogate tank waste solution. An extended test run of 100 hr performed on a surrogate tank waste solution showed some deterioration in filtration performance, based on flux, apparently due to the buildup of solids near the inner portion of the membrane where relative membrane velocities were low. Continued testing of the system will focus on modifications to the shear pattern across the entire membrane surface to affect improved long-term performance.

  8. Cake Filtration in Viscoelastic Polymer Solutions

    Science.gov (United States)

    Surý, Alexander; Machač, Ivan

    2009-07-01

    In this contribution, the filtration equations for a cake filtration in viscoelastic fluids are presented. They are based on a capillary hybrid model for the flow of a power law fluid. In order to express the elastic pressure drop excess in the flow of viscoelastic filtrate through the filter cake and filter screen, modified Deborah number correction functions are included into these equations. Their validity was examined experimentally. Filtration experiments with suspensions of hardened polystyrene particles (Krasten) in viscoelastic aqueous solutions of polyacryl amides (0.4% and 0.6%wt. Kerafloc) were carried out at a constant pressure on a cylindrical filtration unit using filter screens of different resistance.

  9. Water Filtration Using Plant Xylem

    CERN Document Server

    Lee, Jongho; Chambers, Valerie; Venkatesh, Varsha; Karnik, Rohit

    2013-01-01

    Effective point-of-use devices for providing safe drinking water are urgently needed to reduce the global burden of waterborne disease. Here we show that plant xylem from the sapwood of coniferous trees - a readily available, inexpensive, biodegradable, and disposable material - can remove bacteria from water by simple pressure-driven filtration. Approximately 3 cm3 of sapwood can filter water at the rate of several liters per day, sufficient to meet the clean drinking water needs of one person. The results demonstrate the potential of plant xylem to address the need for pathogen-free drinking water in developing countries and resource-limited settings.

  10. Pig manure treatment and purification by filtration.

    Science.gov (United States)

    Makara, A; Kowalski, Z

    2015-09-15

    This study aimed to develop a new, complex pig manure treatment and filtration process. The final scheme, called the AMAK process, comprised the following successive steps: mineralization with mineral acids, alkalization with lime milk, superphosphate addition, a second alkalization, thermal treatment, and pressure filtration. The proposed method produced a filtrate with 95%, 80%, and 96% reductions in chemical oxygen demand, nitrogen content, and phosphorus content, respectively. An advantage of the proposed method was that it incorporated a crystalline phase into the solid organic part of the manure, which enabled high filtration rates (>1000 kg m(-2) h(-1)) and efficient separation. The process also eliminated odor emissions from the filtrate and sediment. The treated filtrate could be used to irrigate crops or it could be further treated in conventional biological wastewater treatment plants. The sediment could be used for producing mineral-organic fertilizer. The AMAK process is inexpensive, and it requires low investment costs.

  11. Side Stream Filtration for Cooling Towers

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-20

    This technology evaluation assesses side stream filtration options for cooling towers, with an objective to assess key attributes that optimize energy and water savings along with providing information on specific technology and implementation options. This information can be used to assist Federal sites to determine which options may be most appropriate for their applications. This evaluation provides an overview of the characterization of side stream filtration technology, describes typical applications, and details specific types of filtration technology.

  12. Glomerular Filtration Barrier Assembly: An insight

    OpenAIRE

    Arif, Ehtesham; Nihalani, Deepak

    2013-01-01

    A glomerulus is the network of capillaries that resides in the Bowman’s capsule that functions as a filtration unit of kidney. The glomerular function ensures that essential plasma proteins are retained in blood and the filtrate is passed on as urine. The glomerular filtration assembly is composed of three main cellular barriers that are critical for the ultrafiltration process, the fenestrated endothelium, glomerular basement membrane and highly specialized podocytes. The podocytes along wit...

  13. Persistent homology in graph power filtrations.

    Science.gov (United States)

    Parks, Allen D; Marchette, David J

    2016-10-01

    The persistence of homological features in simplicial complex representations of big datasets in R (n) resulting from Vietoris-Rips or Čech filtrations is commonly used to probe the topological structure of such datasets. In this paper, the notion of homological persistence in simplicial complexes obtained from power filtrations of graphs is introduced. Specifically, the rth complex, r ≥ 1, in such a power filtration is the clique complex of the rth power G(r) of a simple graph G. Because the graph distance in G is the relevant proximity parameter, unlike a Euclidean filtration of a dataset where regional scale differences can be an issue, persistence in power filtrations provides a scale-free insight into the topology of G. It is shown that for a power filtration of G, the girth of G defines an r range over which the homology of the complexes in the filtration are guaranteed to persist in all dimensions. The role of chordal graphs as trivial homology delimiters in power filtrations is also discussed and the related notions of 'persistent triviality', 'transient noise' and 'persistent periodicity' in power filtrations are introduced.

  14. Air filtration and indoor air quality

    DEFF Research Database (Denmark)

    Bekö, Gabriel

    2006-01-01

    decent ventilation and air cleaning/air filtration, high indoor air quality cannot be accomplished. The need for effective air filtration has increased with increasing evidence on the hazardous effects of fine particles. Moreover, the air contains gaseous pollutants, removal of which requires various air....... These contradictions should motivate manufacturers and researchers to develop new efficient filtration techniques and/or improve the existing ones. Development of low polluting filtration techniques, which are at the same time easy and inexpensive to maintain is the way forward in the future....

  15. Filtration and compression of organic materials

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Keiding, Kristian

    The conventional filtration theory has been based on filtrations of incompressible particles such as anatase, kaolin and clay. The filtration models have later been used for organic slurries but can often not explain the observed experimental data. At constant pressure, the filtrate volume does...... not increase in proportion with square root time when e.g. sewage sludge and manure are filtered. Different explanations have been suggested. However, organic slurries are complex mixtures and it is therefore difficult to evaluate the suggested explanations and develops new models. One possible solution...

  16. Morphology and fractal characteristic of deposits formed during fiber bundle media filtration

    Institute of Scientific and Technical Information of China (English)

    WANG De-ying; SHEN Zi-qiu

    2005-01-01

    The scanning electronic microscope and automated image analyzer are adopted to investigate the morphology of deposits formed during fiber bundle media filtration, which results in the discovery of the self-similarity of the deposits. Then in this paper it is proposed that the deposits are a fractal structure. Moreover, the fractal dimension value is related to the filter performance. The.higher the fractal dimension value, the higher the filtration efficiency, and the longer filtration cycle, but the development of the head loss is also faster.

  17. Tangential flow filtration of hemoglobin.

    Science.gov (United States)

    Palmer, Andre F; Sun, Guoyong; Harris, David R

    2009-01-01

    Bovine and human hemoglobin (bHb and hHb, respectively) was purified from bovine and human red blood cells via tangential flow filtration (TFF) in four successive stages. TFF is a fast and simple method to purify Hb from RBCs using filtration through hollow fiber (HF) membranes. Most of the Hb was retained in stage III (100 kDa HF membrane) and displayed methemoglobin levels less than 1%, yielding final concentrations of 318 and 300 mg/mL for bHb and hHb, respectively. Purified Hb exhibited much lower endotoxin levels than their respective RBCs. The purity of Hb was initially assessed via SDS-PAGE, and showed tiny impurity bands for the stage III retentate. The oxygen affinity (P(50)) and cooperativity coefficient (n) were regressed from the measured oxygen-RBC/Hb equilibrium curves of RBCs and purified Hb. These results suggest that TFF yielded oxygen affinities of bHb and hHb that are comparable to values in the literature. LC-MS was used to measure the molecular weight of the alpha (alpha) and beta (beta) globin chains of purified Hb. No impurity peaks were present in the HPLC chromatograms of purified Hb. The mass of the molecular ions corresponding to the alpha and beta globin chains agreed well with the calculated theoretical mass of the alpha- and beta- globin chains. Taken together, our results demonstrate that HPLC-grade Hb can be generated via TFF. In general, this method can be more broadly applied to purify Hb from any source of RBCs. This work is significant, since it outlines a simple method for generating Hb for synthesis and/or formulation of Hb-based oxygen carriers.

  18. Comparison of parabolic filtration methods for 3D filtered back projection in pulsed EPR imaging.

    Science.gov (United States)

    Qiao, Zhiwei; Redler, Gage; Epel, Boris; Halpern, Howard J

    2014-11-01

    Pulse electron paramagnetic resonance imaging (Pulse EPRI) is a robust method for noninvasively measuring local oxygen concentrations in vivo. For 3D tomographic EPRI, the most commonly used reconstruction algorithm is filtered back projection (FBP), in which the parabolic filtration process strongly influences image quality. In this work, we designed and compared 7 parabolic filtration methods to reconstruct both simulated and real phantoms. To evaluate these methods, we designed 3 error criteria and 1 spatial resolution criterion. It was determined that the 2 point derivative filtration method and the two-ramp-filter method have unavoidable negative effects resulting in diminished spatial resolution and increased artifacts respectively. For the noiseless phantom the rectangular-window parabolic filtration method and sinc-window parabolic filtration method were found to be optimal, providing high spatial resolution and small errors. In the presence of noise, the 3 point derivative method and Hamming-window parabolic filtration method resulted in the best compromise between low image noise and high spatial resolution. The 3 point derivative method is faster than Hamming-window parabolic filtration method, so we conclude that the 3 point derivative method is optimal for 3D FBP. Copyright © 2014. Published by Elsevier Inc.

  19. PDF-based heterogeneous multiscale filtration model.

    Science.gov (United States)

    Gong, Jian; Rutland, Christopher J

    2015-04-21

    Motivated by modeling of gasoline particulate filters (GPFs), a probability density function (PDF) based heterogeneous multiscale filtration (HMF) model is developed to calculate filtration efficiency of clean particulate filters. A new methodology based on statistical theory and classic filtration theory is developed in the HMF model. Based on the analysis of experimental porosimetry data, a pore size probability density function is introduced to represent heterogeneity and multiscale characteristics of the porous wall. The filtration efficiency of a filter can be calculated as the sum of the contributions of individual collectors. The resulting HMF model overcomes the limitations of classic mean filtration models which rely on tuning of the mean collector size. Sensitivity analysis shows that the HMF model recovers the classical mean model when the pore size variance is very small. The HMF model is validated by fundamental filtration experimental data from different scales of filter samples. The model shows a good agreement with experimental data at various operating conditions. The effects of the microstructure of filters on filtration efficiency as well as the most penetrating particle size are correctly predicted by the model.

  20. Metal reduction at bulk chemical filtration

    Science.gov (United States)

    Umeda, Toru; Daikoku, Shusaku; Tsuzuki, Shuichi; Murakami, Tetsuya

    2017-03-01

    OK73 thinner and cyclohexanone, both of which were spiked with metals were passed through Nylon 6,6 filter, varying flow rate, which include the conditions of both point-of-use and bulk filtrations. The influent and effluent metal concentrations were measured using ICP-MS for metal removal efficiency of the filtration. As a result, removal efficiency for some metals descended depending on the flow rate, while others maintained. Slower flow rate is recommended to maintain low metal concentration in bulk filtration based on the result. Metals in cyclohexanone were reduced at higher efficiency than in OK73 thinner, agrees with a metal removal model of hydrophilic adsorbent in organic solvent, evidenced in our previous paper. Further, metal reduction on 300 mm φ Si wafer after coating organic solvents with Nylon 6,6 filtration was evidenced with TREX analysis.

  1. Filtration in coal liquefaction - Influence of filtration conditions in non-hydrogenated systems

    Science.gov (United States)

    Clarke, J. W.; Rantell, T. D.

    1980-01-01

    A series of experiments has been carried out to study the effects of filtration conditions upon the rate of filtration of non-hydrogenated coal digests. The results show the dependence of cake resistivity on both the filtration temperature and pressure. Filter cakes were found to be compressible, resulting in smaller increases in rate with increasing pressure than with incompressible cakes. The filtration temperature determines the packing of residual solids in the cake which in turn affects the cake resistivity. An empirical relation has been derived between filtration temperature and resistivity. With increasing temperature there is an increase in filtration rate due to the reduced viscosity, but a reduction owing to a higher packing density of solids in the filter cake.

  2. Complications and Management of the Filtration Bleb

    Institute of Scientific and Technical Information of China (English)

    Clement; W; N; Chan

    1992-01-01

    Filtration surgery is the commonest operation performed for closed angle or open angle glaucoma when medical treatment or laser trabeculoplasty has failed to control the intraocular pressure. It is characterized by the formation of an artificial drainage fistula between the anterior chamber and subconjunctival space. The successful operation is evidenced by the appearance of a subconjunctival filtration bleb which in turn depends on the patency of this pathway. Despite numerous modification, the procedu...

  3. The Glomerular Filtration Barrier: Components and Crosstalk

    OpenAIRE

    Madhav C. Menon; Chuang, Peter Y.; Cijiang John He

    2012-01-01

    The glomerular filtration barrier is a highly specialized blood filtration interface that displays a high conductance to small and midsized solutes in plasma but retains relative impermeability to macromolecules. Its integrity is maintained by physicochemical and signalling interplay among its three core constituents—the glomerular endothelial cell, the basement membrane and visceral epithelial cell (podocyte). Understanding the pathomechanisms of inherited and acquired human diseases as well...

  4. Benchtop isolation and characterization of functional exosomes by sequential filtration.

    Science.gov (United States)

    Heinemann, Mitja L; Ilmer, Matthias; Silva, Leslie P; Hawke, David H; Recio, Alejandro; Vorontsova, Maria A; Alt, Eckhard; Vykoukal, Jody

    2014-12-05

    Early and minimally invasive detection of malignant events or other pathologies is of utmost importance in the pursuit of improved patient care and outcomes. Recent evidence indicates that exosomes and extracellular vesicles in serum and body fluids can contain nucleic acid, protein, and other biomarkers. Accordingly, there is great interest in applying these clinically as prognostic, predictive, pharmacodynamic, and early detection indicators. Nevertheless, existing exosome isolation methods can be time-consuming, require specialized equipment, and/or present other inefficiencies regarding purity, reproducibility and assay cost. We have developed a straightforward, three-step protocol for exosome isolation of cell culture supernatants or large volumes of biofluid based on sequential steps of dead-end pre-filtration, tangential flow filtration (TFF), and low-pressure track-etched membrane filtration that we introduce here. Our approach yields exosome preparations of high purity and defined size distribution and facilitates depletion of free protein and other low-molecular-weight species, extracellular vesicles larger than 100nm, and cell debris. Samples of exosomes prepared using the approach were verified morphologically by nanoparticle tracking analysis and electron microscopy, and mass spectrometry analyses confirmed the presence of previously reported exosome-associated proteins. In addition to being easy-to-implement, sequential filtration yields exosomes of high purity and, importantly, functional integrity as a result of the relatively low-magnitude manipulation forces employed during isolation. This answers an unmet need for preparation of minimally manipulated exosomes for investigations into exosome function and basic biology. Further, the strategy is amenable to translation for clinical exosome isolations because of its speed, automatability, scalability, and specificity for isolating exosomes from complex biological samples.

  5. Properties of the filtrate from treatment of pig manure by filtration method

    Directory of Open Access Journals (Sweden)

    Makara Agnieszka

    2017-02-01

    Full Text Available This paper presents properties of filtrate obtained from pig manure using the AMAK treatment process, which includes the mineralization of macro- and microfertilizer components by the hydrolyzing of organic matter into forms that are bioavailable to plants. Filtration produced two products, sediment and filtrate. The quality of the filtrate allowed for its use as a substitute of water to irrigate crops. Concentrations of heavy metals are very low and therefore the quality of the filtrate fully complies with European standard concerning fertilizers. The used mineralization process practically eliminated odors from the filtrate. The reduction of specific odor emission by 99.1-99.5% in samples taken from above the filtrate, respectively compared to the odor concentration found in samples taken from above raw pig manure. Sediment could be used as raw material for production of mineral-organic fertilizer. Filtrate and filtration sediments analyses show that the majority of nitrogen and other fertilizing compounds included in raw pig manure remains in sediment.

  6. 21 CFR 177.2910 - Ultra-filtration membranes.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ultra-filtration membranes. 177.2910 Section 177... Components of Articles Intended for Repeated Use § 177.2910 Ultra-filtration membranes. Ultra-filtration... the processing of food, under the following prescribed conditions; (a)(1) Ultra-filtration...

  7. Filtration of sodium chloride from seawater using carbon hollow tube composed of carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Chaudhary Ravi Prakash Patel

    2014-07-01

    Full Text Available The present article deals with filtration of seawater to remove sodium chloride (NaCl using filter made from organized structures of carbon nanotubes (CNTs. The filter consists of hollow carbon cylinder (length ~10 cm, diameter ~1 cm, which is composed of radially aligned CNTs. This carbon hollow cylinder has been synthesized by continuous spray pyrolysis of ferrocene–benzene solution in argon atmosphere. The hollow cylinder has been turned into a water filter by closing one end and keeping a small funnel at the other. Filtration of seawater (Marina Beach, Chennai, India has been obtained both under the self pressure of seawater column in the hollow cylinder and under the difference of pressure created by enclosing the filter in a vacuum tight container. It has been found that the efficiency of filtration is about two times higher under partial vacuum (~10–2 torr created on the filtrate (water side. After filtration of seawater, a deposit in the inner surface of hollow cylinder has been found. This deposit has been characterized by X-ray diffraction, transmission electron microscopy and energy dispersive X-ray analysis, and it has been found that the deposit was NaCl. The filtration leads to almost complete removal of NaCl from the seawater.

  8. Measured performance of filtration and ventilation systems for fine and ultrafine particles and ozone in an unoccupied modern California house.

    Science.gov (United States)

    Singer, B C; Delp, W W; Black, D R; Walker, I S

    2016-12-05

    This study evaluated nine ventilation and filtration systems in an unoccupied 2006 house located 250 m downwind of the I-80 freeway in Sacramento, California. Systems were evaluated for reducing indoor concentrations of outdoor particles in summer and fall/winter, ozone in summer, and particles from stir-fry cooking. Air exchange rate was measured continuously. Energy use was estimated for year-round operation in California. Exhaust ventilation without enhanced filtration provided indoor PM2.5 that was 70% lower than outdoors. Supply ventilation with MERV13 filtration provided slightly less protection, whereas supply MERV16 filtration reduced PM2.5 by 97-98% relative to outdoors. Supply filtration systems used little energy but provided no benefits for indoor-generated particles. Systems with MERV13-16 filter in the recirculating heating and cooling unit (FAU) operating continuously or 20 min/h reduced PM2.5 by 93-98%. Across all systems, removal percentages were higher for ultrafine particles and lower for black carbon, relative to PM2.5 . Indoor ozone was 3-4% of outdoors for all systems except an electronic air cleaner that produced ozone. Filtration via the FAU or portable filtration units lowered PM2.5 by 25-75% when operated over the hour following cooking. The energy for year-round operation of FAU filtration with an efficient blower motor was estimated at 600 kWh/year.

  9. The Glomerular Filtration Barrier: Components and Crosstalk

    Directory of Open Access Journals (Sweden)

    Madhav C. Menon

    2012-01-01

    Full Text Available The glomerular filtration barrier is a highly specialized blood filtration interface that displays a high conductance to small and midsized solutes in plasma but retains relative impermeability to macromolecules. Its integrity is maintained by physicochemical and signalling interplay among its three core constituents—the glomerular endothelial cell, the basement membrane and visceral epithelial cell (podocyte. Understanding the pathomechanisms of inherited and acquired human diseases as well as experimental injury models of this barrier have helped to unravel this interdependence. Key among the consequences of interference with the integrity of the glomerular filtration barrier is the appearance of significant amounts of proteins in the urine. Proteinuria correlates with kidney disease progression and cardiovascular mortality. With specific reference to proteinuria in human and animal disease phenotypes, the following review explores the roles of the endothelial cell, glomerular basement membrane, and the podocyte and attempts to highlight examples of essential crosstalk within this barrier.

  10. The evolution of down-scale virus filtration equipment for virus clearance studies.

    Science.gov (United States)

    Wieser, Andreas; Berting, Andreas; Medek, Christian; Poelsler, Gerhard; Kreil, Thomas R

    2015-03-01

    The role of virus filtration in assuring the safety of biopharmaceutical products has gained importance in recent years. This is due to the fundamental advantages of virus filtration, which conceptually can remove all pathogens as long as their size is larger than the biomolecule of commercial interest, while at the same time being neutral to the biological activity of biopharmaceutical compound(s). Major progress has been made in the development of adequate filtration membranes that can remove even smaller viruses, or possibly even all. Establishing down-scaled models for virus clearance studies that are fully equivalent with respect to operating parameters at manufacturing scale is a continuing challenge. This is especially true for virus filtration procedures where virus clearance studies at small-scale determine the operating parameters, which can be used at manufacturing scale. This has limited volume-to-filter-area-ratios, with significant impact on process economics. An advanced small-scale model of virus filtration, which allows the investigation of the full complexity of these processes, is described here. It includes the automated monitoring and control of all process parameters, as well as an electronic data acquisition system, which is fully compliant with current regulatory requirements for electronic records in a pharmaceutical environment.

  11. Maize genome sequencing by methylation filtration.

    Science.gov (United States)

    Palmer, Lance E; Rabinowicz, Pablo D; O'Shaughnessy, Andrew L; Balija, Vivekanand S; Nascimento, Lidia U; Dike, Sujit; de la Bastide, Melissa; Martienssen, Robert A; McCombie, W Richard

    2003-12-19

    Gene enrichment strategies offer an alternative to sequencing large and repetitive genomes such as that of maize. We report the generation and analysis of nearly 100,000 undermethylated (or methylation filtration) maize sequences. Comparison with the rice genome reveals that methylation filtration results in a more comprehensive representation of maize genes than those that result from expressed sequence tags or transposon insertion sites sequences. About 7% of the repetitive DNA is unmethylated and thus selected in our libraries, but potentially active transposons and unmethylated organelle genomes can be identified. Reverse transcription polymerase chain reaction can be used to finish the maize transcriptome.

  12. The Perspective of Riverbank Filtration in China

    Science.gov (United States)

    Li, J.; Teng, Y.; Zhai, Y.; Zuo, R.

    2014-12-01

    Sustainable drinking water supply can affect the health of people, and the surrounding ecosystems. According to statistics of the monitoring program of drinking water sources in 309 at or above prefecture level of China in 2013, the major pollutants index were total phosphorus, ammonia and manganese in surface drinking water sources, respectively, iron, ammonia and manganese in groundwater drinking water sources, respectively. More than 150 drinking water emergency environmental accidents happened since 2006, 52 of these accidents led to the disruption of water supply in waterworks, and a population of over ten million were affected. It indicated that there is a potential risk for people's health by the use of river water directly and it is necessary to require alternative techniques such as riverbank filtration for improving the drinking water quality. Riverbank filtration is an inexpensive natural process, not only smoothing out normal pollutant concentration found in surface water but also significantly reducing the risk from such emergency events as chemical spill into the river. Riverbank filtration technique has been used in many countries more than 100 years, including China. In China, in 1950s, the bank infiltration technique was first applied in northeast of China. Extensive bank infiltration application was conducted in 1980s, and more than 300 drinking water sources utilities bank infiltration established mainly near the Songhua River Basin, the Yellow River Basin, Haihe River Basin. However, the comparative lack of application and researches on riverbank filtration have formed critical scientific data gap in China. As the performance of riverbank filtration technique depend on not only the design and setting such as well type, pumping rate, but also the local hydrogeology and environmental properties. We recommend more riverbank filtration project and studies to be conducted to collect related significant environmental geology data in China

  13. Salt disposition alternatives filtration at SRTC

    Energy Technology Data Exchange (ETDEWEB)

    Walker, B. W.; Hobbs, D.

    2000-01-27

    Several of the prospective salt disposition alternative technologies require a monosodium titanate (MST) contact to remove strontium and actinides from inorganic salt solution feedstock. This feedstock also contains sludge solids from waste removal operations and may contain defoamers added in the evaporator systems. Filtration is required to remove the sludge and MST solids before sending the salt solution for further processing. This report describes testing performed using the Parallel Theological Experimental Filter (PREF). The PREF contains two single tube Mott sintered metal crossflow filters. For this test one filter was isolated so that the maximum velocities could be achieved. Previous studies showed slurries of MST and sludge in the presence of sodium tetraphenylborate (NaTPB) were filterable since the NaTPB slurry formed a filter cake which aided in removing the smaller MST and sludge particles. Some of the salt disposition alternative technologies do not use NaTPB raising the question of how effective crossflow filtration is with a feed stream containing only sludge and MST. Variables investigated included axial velocity, transmembrane pressure, defoamer effects, and solids concentration (MST and sludge). Details of the tests are outlined in the technical report WSRC-RP-98-O0691. Key conclusions from this study are: (1) Severe fouling of the Mott sintered metal filter did not occur with any of the solutions filtered. (2) The highest fluxes, in the range of .46 to 1.02 gpm/f{sup 2}, were obtained when salt solution decanted from settled solids was fed to the filter. These fluxes would achieve 92 to 204 gpm filtrate production for the current ITP filters. The filtrate fluxes were close to the flux of 0.42 gpm/f{sup 2} reported for In Tank Precipitation Salt Solution by Morrisey. (3) For the range of solids loading studied, the filter flux ranged from .04 to .17 gpm/f{sup 2} which would result in a filtrate production rate of 9 to 31 gpm for the current HP

  14. Industrial investigations of the liquid steel filtration

    Directory of Open Access Journals (Sweden)

    K. Janiszewski

    2014-07-01

    Full Text Available Hitherto existing investigations concerning the ceramic filter use in the steel making processes have given good results. The obtained results of filtration have proved that this method may be used as an effective and cheap way of steel filtration from non-metallic inclusions. Placing filters in the tundish is the best location considering the limitation of the possibility of secondary pollution of steel. Yet, the results presented in this paper, of an experiment prepared and carried out in the industrial environment, are the only positive results obtained, which are connected with so much quantities of liquid steel processed with use of the multi-hole ceramic filters.

  15. Projective Dimension in Filtrated K-Theory

    DEFF Research Database (Denmark)

    Bentmann, Rasmus Moritz

    2013-01-01

    Under mild assumptions, we characterise modules with projective resolutions of length n∈N in the target category of filtrated K-theory over a finite topological space in terms of two conditions involving certain Tor -groups. We show that the filtrated K-theory of any separable C∗dash-algebra over...... any topological space with at most four points has projective dimension 2 or less. We observe that this implies a universal coefficient theorem for rational equivariant KK-theory over these spaces. As a contrasting example, we find a separable C∗dash-algebra in the bootstrap class over a certain five...

  16. Projective Dimension in Filtrated K-Theory

    DEFF Research Database (Denmark)

    Bentmann, Rasmus Moritz

    2013-01-01

    any topological space with at most four points has projective dimension 2 or less. We observe that this implies a universal coefficient theorem for rational equivariant KK-theory over these spaces. As a contrasting example, we find a separable C∗dash-algebra in the bootstrap class over a certain five......-point space, the filtrated K-theory of which has projective dimension 3. Finally, as an application of our investigations, we exhibit Cuntz-Krieger algebras which have projective dimension 2 in filtrated K-theory over their respective primitive spectrum....

  17. Mechanisms of pressure filtration of liquid aluminum alloys

    Science.gov (United States)

    Cao, X.

    2006-12-01

    The Prefil Footprinter, a portable pressure filtration instrument, is usually used to detect the quality of liquid aluminum alloys. However, no investigations have ever been done to calculate the cake resistance to date. Based on the identification and classification of flow behavior using the first derivative method for filtrate mass vs filtration time curves, conventional filtration equations are successfully employed to understand the filtration behaviors. From the analyses of the variations of cake resistance with filtration time, the filtration mechanisms are discussed in detail over the different filtration stages. During the steady stage, either incompressible or compressible cake mode is the main mechanism. At the initial and terminal transient stages, however, deep-bed filtration, complete straining, and solidification clogging may appear. Solid inclusions in liquid metal have significant influence on the cake structures and properties. Some important issues related to the heterogeneity of filter media and test methodology are highlighted in this work.

  18. Aerosol filtration - performance of filter media; Filtration des aerosols - performances des medias filtrants

    Energy Technology Data Exchange (ETDEWEB)

    Bemer, D.; Regnier, R. [Institut National de Recherche et de Securite (INRS), Dept. Ingenierie des Procedes, 75 - Paris (France); Calle, S.; Thomas, D.; Simon, X.; Appert-Collin, J.Ch. [Centre National de la Recherche Scientifique (CNRS), Lab. des Sciences du Genie Chimique de Nancy, 54 - Vandoeuvre-les-Nancy (France)

    2006-03-15

    Set up in 2000, the Laboratoire de Filtration des Aerosols in Nancy (LFA), associating research teams from INRS (Institut National de Recherche et de Securite and LSGC (Laboratoire des Sciences du Genie Chimique - CNRS), has been commissioned to provide expertise in the aerosol filtration field to both CRAM (Caisse Regionale de l'Assurance Maladie) prevention specialists and industrialists. Following a theoretical review of fibre medium filtration, this paper summarises the different actions undertaken by the LFA: filter performance during clogging with liquid and solid aerosols, modelling, pneumatic unclogging of baghouse dust collectors, influence of micro-leaks, etc. (authors)

  19. Prevention of febrile nonhemolytic transfusion reaction with leucocyte filtrated concentrates

    Institute of Scientific and Technical Information of China (English)

    ZHAO Shu-ming; XIANG Guo-chun; ZHANG Jia-si; CHENG Xiao-ling; LI Ru-qing

    2002-01-01

    Objective: To assess the clinical efficiency of the transfusion of leucocyte filtrated RBC concentrates to prevent febrile nonhemolytic transfusion reactions (FNHTRs). Methods: One hundred patients with liver cirrhosis, gastric ulcer or cancer were subjected to receive RBC concentrates after leucocyte filtration.Another 50 patients with similar diseases were selected to receive non-filtrated RBC concentrates. The incidence of FNHTRs in all patients was investigated. Results: There was no FNHTR in 100 transfusions with leucocyte filtrated RBC concentrates, while FNHTRs occurred in 8 of 50 patients with non-filtrated RBC concentrates, with the incidence of 160%. Conclusion: FNHTRs to RBC transfusion can be prevented with leucocyte filtration.

  20. Plasma discharge self-cleaning filtration system

    Science.gov (United States)

    Cho, Young I.; Fridman, Alexander; Gutsol, Alexander F.; Yang, Yong

    2014-07-22

    The present invention is directed to a novel method for cleaning a filter surface using a plasma discharge self-cleaning filtration system. The method involves utilizing plasma discharges to induce short electric pulses of nanoseconds duration at high voltages. These electrical pulses generate strong Shockwaves that disintegrate and dislodge particulate matter located on the surface of the filter.

  1. Filtration of engineered nanoparticles using porous membranes

    NARCIS (Netherlands)

    Trzaskus, Krzystof

    2016-01-01

    The research presented in this thesis aims at providing a better understanding of the fundamental aspects responsible for nanoparticle removal and fouling development during filtration of engineered nanoparticles. The emphasis is put on the role of interparticle interactions in the feed solution,

  2. Organic micropollutant removal during river bank filtration

    NARCIS (Netherlands)

    Bertelkamp, C.

    2015-01-01

    This study investigated the factors influencing the main removal mechanisms (adsorption and biodegradation) for organic micropollutant (OMP) removal during river bank filtration (RBF) and the possibility of developing a predictive model of this process for OMP removal during RBF. Chapter 2 analysed

  3. [Clinical experience of automated double filtration plasmapheresis].

    Science.gov (United States)

    Lee, C T; Chuang, F R; Hsu, K T; Lam, K K; Liao, S C; Liu, C C; Chen, J B; Jang, S W; Chien, Y S; Pan, H H

    1996-12-01

    Double filtration plasmapheresis, one kind of fractionation plasmapheresis, was developed from membrane type plasmapheresis to remove only the pathogen and return the normal protein back to the patient. We started our automated double filtration plasmapheresis since December 1993. There were 13 patients who received one hundred treatments totally during one year period. And they are myasthenia gravis (8 patients); acute inflammatory demyelinating polyneuropathy (1 patient), multiple myeloma (1 patient); acquired factor VIII inhibitor (1 patient); autoimmune hemolytic anemia (1 patient); systemic lupus erythematous (1 patient). Technically double filtration plasmapheresis is easy to perform and time-saving. It also makes necessity of replacement fluid less frequent. Incidence of complication is rare, and this includes hypotension 2%, palpitation 1%, headache 1%, hemolysis 4%, air emboli 1%, high secondary pressure 2%, and no motality during our treatment. Clinical response is documented in cases of myasthenia gravis; acute inflammatory demyelinating polyneuropathy and acquired factor VIII inhibitor in our study. In conclusion, double filtration plasmapheresis is a time-saving, convenient, and safe therapeutic modality with rare complication. Because its effectiveness on limited kinds of diseases and costs relatively high price, thus plasmapheresis should be used in selected cases and treat aggressively if indicated.

  4. Advances in hot gas filtration technology

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.

    The past decade has seen the introduction of new filter media specifically designed for 'hot-gas' filtration. These media are available as woven or knitted fabrics and as non-wovens, i.e. needled felts. Needlefelted fabrics have proven so highly successful in the dedusting of hot gases that they are widely used nowadays in this new and necessary technology. Hot-gas filtration offers advantages in, for example, the saving or recycling of energy, the elimination of the cooling process, and the short-circuiting of process steps. This paper gives a survey of the types of textile fibres available for hot-gas filtration from the more recently developed organic fibres to refractory fibres. It describes, compares and contrasts their salient properties and lists the uses to which they may be put. It concentrates on such fibres which are generally referred to as 'high performance materials', since they are expected to provide satisfactory performance under extreme conditions of temperature, chemical environment and mechanical stress. It touches on filtration theory governing the collection mechanism. 9 refs., 7 figs., 3 tabs.

  5. Using Digital Filtration for Hurst Parameter Estimation

    Directory of Open Access Journals (Sweden)

    J. Prochaska

    2009-06-01

    Full Text Available We present a new method to estimate the Hurst parameter. The method exploits the form of the autocorrelation function for second-order self-similar processes and is based on one-pass digital filtration. We compare the performance and properties of the new method with that of the most common methods.

  6. Evaluation of the effectiveness of the filtration leaching for uranium recovery from uranium ore

    OpenAIRE

    2015-01-01

    The physical and chemical processes taking place in filtration leaching of uranium from uranium ore sample by sulphuric acid solution have been studied by modern physico-chemical methods (X-ray diffraction, scanning electron spectroscopy, electron probe microanalysis, optical emission spectroscope, ICP OES). Column leaching test was carried out for ore samples obtained from a uranium in-situ leaching (ISL) mining site using deluted sulphuricacid to study the evolution of various elements conc...

  7. OPTIMIZATION OF THE PROCESS OF DRYING THE FILTRATE DISTILLERY DREGS

    Directory of Open Access Journals (Sweden)

    A. A. Shevtsov

    2013-01-01

    Full Text Available The interactions of various factors affecting the process of drying the filtrate distillery dregs are investigated. Rational conditions for the process of drying the filtrate distillery dregs in a spray dryer are obtained.

  8. Internal filtration, filtration fraction, and blood flow resistance in high- and low-flux dialyzers.

    Science.gov (United States)

    Schneditz, Daniel; Zierler, Edda; Vanholder, Raymond; Eloot, Sunny

    2014-01-01

    It was the aim to examine the fluid flow in blood and dialysate compartments of highly permeable hollow fiber dialyzers where internal filtration contributes to solute removal but where excessive filtration bears a risk of cell activation and damage. Flow characteristics of high- (HF) and low-flux (LF) dialyzers were studied in lab-bench experiments using whole bovine blood. Measurements obtained under different operating conditions and under zero net ultrafiltration were compared to theoretical calculations obtained from a mathematical model. Experimental resistances in the blood compartment were within ±2% of those calculated from the model when dialysate was used as a test fluid. With whole blood, the experimental resistances in the blood compartment were only 81.8 ± 2.8% and 83.7 ± 4.3% of those calculated for the LF and HF dialyzer, respectively. Surprisingly, measured blood flow resistance slightly but significantly decreased with increasing flow rate (p filtration fraction, while overall internal filtration increased. The increase in internal filtration when increasing blood flow is associated with a beneficial reduction in internal filtration fraction. Concerns of increased hemoconcentration when increasing blood flow therefore appear to be unwarranted.

  9. Technology Review of Modern Gas Turbine Inlet Filtration Systems

    OpenAIRE

    2012-01-01

    An inlet air filtration system is essential for the successful operation of a gas turbine. The filtration system protects the gas turbine from harmful debris in the ambient air, which can lead to issues such as FOD, erosion, fouling, and corrosion. These issues if not addressed will result in a shorter operational life and reduced performance of the gas turbine. Modern day filtration systems are comprised of multiple filtration stages. Each stage is selected based on the local operating envir...

  10. 40 CFR 141.171 - Criteria for avoiding filtration.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Criteria for avoiding filtration. 141... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Enhanced Filtration and Disinfection-Systems Serving 10,000 or More People § 141.171 Criteria for avoiding filtration. In addition to...

  11. 40 CFR 141.174 - Filtration sampling requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Filtration sampling requirements. 141... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Enhanced Filtration and Disinfection-Systems Serving 10,000 or More People § 141.174 Filtration sampling requirements. (a)...

  12. 40 CFR 141.71 - Criteria for avoiding filtration.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Criteria for avoiding filtration. 141... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.71 Criteria for avoiding filtration. A public water system that uses a surface water source must meet all...

  13. Origins of the poor filtration characteristics of wheat starch hydrolysates

    NARCIS (Netherlands)

    Matser, A.M.; Steeneken, P.A.M.

    1998-01-01

    The effects of wheat starch components on the filtration characteristics of wheat starch hydrolysates were investigated with a model-based approach. The filtration rate was not affected by the removal of the pentosans or by altering the conformation of the protein. On the other hand, the filtration

  14. Nanoparticles filtration by leaked fibrous filters

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, Guillaume; Calle-Chazelet, Sandrine; Thomas, Dominique; Appert-Collin, Jean-Christophe [Nancy-Universite/LSGC/CNRS - 1 rue Grandville - BP 20451 - F-54001 Nancy Cedex (France)], E-mail: sandrine.calle@ensic.inpl-nancy.fr; Bemer, Denis [INRS - Avenue de Bourgogne - F-54501 Vandoeuvre les Nancy Cedex (France)

    2009-05-01

    The aim of this work is first to measured nanoparticles penetration through three different fiberglass filters intentionally-pierced with calibrated needles at different filtration velocity. Then a semi-empirical model based on the air flow resistances of the new and perforated filter media and on the mechanism of Brownian diffusion for the collection of ultrafine particles by the media enables to well predict the efficiency observed for all tested operating conditions. Results show that the increase of particles penetration is all the more important that the pinhole is large and that the particle diameter is low. Another result is that the filtration efficiency of the new filter media controlled the penetration. A high efficiency filter with a high resistance to air flow will be more damaged than a low efficiency filter when being perforated.

  15. Integrative filtration research and sustainable nanotechnology

    Institute of Scientific and Technical Information of China (English)

    Jing Wang; Drew Thompson; David Y.H.Pui

    2013-01-01

    With the wide applications of nanomaterials in an array of industries,more concerns are being raised about the occupational health and safety of nanoparticles in the workplace,and implications of nanotechnology on the environment and living systems.Studies on environmental,health and safety (EHS) issues of nanomaterials play a significant role in public acceptance,and eventual sustainability,of nanotechnology.We present research results on three aspects of the EHS studies:characterization and measurement of nanoparticles,nanoparticle emission and exposure at workplaces,and control and abatement of nanoparticle release using filtration technology.Measurement of nanoparticle agglomerates using a newly developed instrument,the Universal Nanoparticle Analyzer,is discussed.Nanoparticle emission and exposure measurement results for carbon nanotubes in the manufacture of nanocomposites and for silicon nanoparticles in their production at a pilot scale facility are presented.Filtration of nanoparticles and nanoparticle agglomerates are also studied.

  16. Air filtration and indoor air quality

    DEFF Research Database (Denmark)

    Bekö, Gabriel

    2006-01-01

    Demands for better indoor air quality are increasing, since we spend most of our time indoors and we are more and more aware of indoor air pollution. Field studies in different parts of the world have documented that high percentage of occupants in many offices and buildings find the indoor air...... decent ventilation and air cleaning/air filtration, high indoor air quality cannot be accomplished. The need for effective air filtration has increased with increasing evidence on the hazardous effects of fine particles. Moreover, the air contains gaseous pollutants, removal of which requires various air...... cleaning techniques. Supply air filter is one of the key components in the ventilation system. Studies have shown that used ventilation filters themselves can be a significant source of indoor air pollution with consequent impact on perceived air quality, sick building syndrome symptoms and performance...

  17. Ultrasonic filtration of industrial chemical solutions

    Science.gov (United States)

    Cosma, T.

    1974-01-01

    The practical results obtained as a result of filtering industrial chemical solutions under continuous flow conditions with the aid of an ultrasonic filter are presented. The main part of the assembly consists of an ultrasonic generator with an output power of about 400 W and the filtration assembly, in which there is a magnetostrictive amplifier constructed for 20.5 kHz. In addition to ensuring a continuous flow of filtered solution, ultrasonic filters can be replaced or cleaned at intervals of time that are 8-10 times greater than in the case of mechanical filters. They yield considerably better results as far as the size of the filtered particles is concerned. The parameters on which filtration quality depends are also presented.

  18. Breakthrough of cyanobacteria in bank filtration.

    Science.gov (United States)

    Pazouki, Pirooz; Prévost, Michèle; McQuaid, Natasha; Barbeau, Benoit; de Boutray, Marie-Laure; Zamyadi, Arash; Dorner, Sarah

    2016-10-01

    The removal of cyanobacteria cells in well water following bank filtration was investigated from a source water consisting of two artificial lakes (A and B). Phycocyanin probes used to monitor cyanobacteria in the source and in filtered well water showed an increase of fluorescence values demonstrating a progressive seasonal growth of cyanobacteria in the source water that were correlated with cyanobacterial biovolumes from taxonomic counts (r = 0.59, p cyanobacteria. Of cyanobacteria that passed through bank filtration, smaller cells were significantly more frequent in well water samples (p cyanobacteria to wells. Winter samples demonstrated that cyanobacteria accumulate within bank filters, leading to continued passage of cells beyond the bloom season. Although no concentrations of total microcystin-LR were above detection limits in filtered well water, there is concern that cyanobacterial cells that reach the wells have the potential to contain intracellular toxins. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. The filtration properties of a dimorphic yeast

    OpenAIRE

    McCarthy, Anthony A

    2001-01-01

    A dimorphic yeast Kluyveromyces marxianu var. marxianus NRRLy2415 which exhibits a wide range of mean morphological forms was used as a model organism to investigate the role of cell morphology on the dead-end and crossflow filtration behaviour. Varying the culturing conditions produced cell suspensions of different mean morphology. Batch fermentations were used to produce yeast-like morphologies and continuous cultures produced cells more mycelial in nature. Semi-automated image analysis was...

  20. Symptomatic hyponatremia during glomerular filtration rate testing

    OpenAIRE

    2010-01-01

    Hyponatremia affects nearly one in five of all hospitalized patients. Severe hyponatremia is associated with significant morbidity and mortality, and is therefore important to recognize. Prior reports have linked duloxetine with hyponatremia, but it is uncommon. In this case report, we describe a research subject taking duloxetine who developed severe symptomatic hyponatremia during glomerular filtration rate testing despite having undergone such testing uneventfully in the past.

  1. Portable Hybrid Powered Water Filtration Device

    Directory of Open Access Journals (Sweden)

    Maria Lourdes V. Balansay

    2015-08-01

    Full Text Available The existing water filtration device has features that can be developed to be more useful and functional during emergency situations. The project’s development has been aided by following provisions in PEC, NEC, NEMA and Philippine National Standard for Safe Drinking Water provide standards for the construction of the project. These standards protect both the prototype and the user. These also served as guide for the maintenance of every component. The design of the portable hybrid powered water filtration device shows that the project has more advanced features such as portability and the power supply used such as photovoltaic module solar cells and manually operated generator. This also shows its effectiveness and reliability based on the results of discharging test, water quality test and water production test. Based on analysis of the overall financial aspects, the machine can be profitable and the amount of revenue and operating cost will increase as years pass. Using the proper machine/ tools and methods of fabrication helps in easy assembly of the project. The materials and components used are cost effective and efficient. The best time for charging the battery using solar panel is 9:00 am onwards while the hand crank generator is too slow because the generated current is little. The water filtration device is very efficient regarding the operating hours and water production. The machine may have a great effect to society and economy in generation of clean available water at less cost.

  2. Aerosol Filtration Application Using Fibrous Media An Industrial Perspective

    Institute of Scientific and Technical Information of China (English)

    杨传芳

    2012-01-01

    Filtration of aerosol particles using non-woven fibrous media is a common practice for air cleaning. It has found wide applications in industries and our daily lives. This paper overviews some of these applications and provides an industrial perspective. It starts from discussing aerosol filtration theory, followed by a brief review on the advancement of filtration media. After that, filtration applications in respiratory protection, dust collection, and engine in-take air cleaning are elaborated. These are the areas that the author sees as the typical needed ones in China's fast pace economical development endeavor, where air filtration enables the protection of human health, environment and equipment for sustainability.

  3. Filtration Combustion in Smoldering and SHS

    Science.gov (United States)

    Matkowsky, Bernard J.

    2001-01-01

    Smolder waves and SHS (self-propagating high-temperature synthesis) waves are both examples of filtration combustion waves propagating in porous media. Smoldering combustion is important for the study of fire safety. Smoldering itself can cause damage, its products are toxic and it can also lead to the more dangerous gas phase combustion which corresponds to faster propagation at higher temperatures. In SHS , a porous solid sample, consisting of a finely ground powder mixture of reactants, is ignited at one end. A high temperature thermal wave, having a frontal structure, then propagates through the sample converting reactants to products. The SHS technology appears to enjoy a number of advantages over the conventional technology, in which the sample is placed in a furnace and "baked" until it is "well done". The advantages include shorter synthesis times, greater economy, in that the internal energy of the reactions is employed rather than the costly external energy of the furnace, purer products, simpler equipment and no intrinsic limitation on the size of the sample to be synthesized as exists in the conventional technology. When delivery of reactants through the pores to the reaction site is an important aspect of the combustion process, it is referred to as filtration combustion. The two types of filtration combustion have a similar mathematical formulation, describing the ignition, propagation and extinction of combustion waves in porous media. The goal in each case, however, is different. In smoldering the desired goal is to prevent propagation, whereas in SHS the goal is to ensure propagation of the combustion wave, leading to the synthesis of desired products. In addition, the scales in the two areas of application differ. Smoldering generally occurs at lower temperatures and propagation velocities than in SHS nevertheless, the two applications have much in common so that what is learned fit make application can be used to advantage in the other. In porous

  4. Nanofiber filter media for air filtration

    Science.gov (United States)

    Raghavan, Bharath Kumar

    Nanofibers have higher capture efficiencies in comparison to microfibers in the submicron particle size range of 100-500 nm because of small fiber diameter and increased surface area of the fibers. Pressure drop across the filter increases tremendously with decrease in fiber diameter in the continuum flow regime. Nanofibers with fiber diameter less than 300 nm are in the slip flow regime as a consequence of which steep increase in pressure drop is considerably reduced due to slip effect. The outlet or inlet gases have broad range of particle size distribution varying from few micrometers to nanometers. The economic benefits include capture of a wide range of particle sizes in the gas streams using compact filters composed of nanofibers and microfibers. Electrospinning technique was used to successfully fabricate polymeric and ceramic nanofibers. The nanofibers were long, continuous, and flexible with diameters in the range of 200--300 nm. Nanofibers were added to the filter medium either by mixing microfibers and nanofibers or by directly electrospinning nanofibers as thin layer on the surface of the microfiber filter medium. Experimental results showed that either by mixing Nylon 6 nanofibers with B glass fibers or by electrospinning Nylon 6 nanofibers as a thin layer on the surface of the microfiber medium in the surface area ratio of 1 which is 0.06 g of nanofibers for 2 g of microfibers performed better than microfiber filter media in air filtration tests. This improved performance is consistent with numerical modeling. The particle loading on a microfibrous filter were studied for air filtration tests. The experimental and modeling results showed that both pressure drop and capture efficiency increased with loading time. Nanofiber filter media has potential applications in many filtration applications and one of them being hot gas filtration. Ceramic nanofibers made of alumina and titania nanofibers can withstand in the range of 1000°C. Ceramic nanofibers

  5. Filtration Efficiency of Functionalized Ceramic Foam Filters for Aluminum Melt Filtration

    Science.gov (United States)

    Voigt, Claudia; Jäckel, Eva; Taina, Fabio; Zienert, Tilo; Salomon, Anton; Wolf, Gotthard; Aneziris, Christos G.; Le Brun, Pierre

    2017-02-01

    The influence of filter surface chemistry on the filtration efficiency of cast aluminum alloys was evaluated for four different filter coating compositions (Al2O3—alumina, MgAl2O4—spinel, 3Al2O3·2SiO2—mullite, and TiO2—rutile). The tests were conducted on a laboratory scale with a filtration pilot plant, which facilitates long-term filtration tests (40 to 76 minutes). This test set-up allows the simultaneous use of two LiMCAs (before and after the filter) for the determination of the efficiency of inclusion removal. The four tested filter surface chemistries exhibited good thermal stability and mechanical robustness after 750 kg of molten aluminum had been cast. All four filter types exhibited a mean filtration efficiency of at least 80 pct. However, differences were also observed. The highest filtration efficiencies were obtained with alumina- and spinel-coated filter surfaces (>90 pct), and the complete removal of the largest inclusions (>90 µm) was observed. The efficiency was slightly lower with mullite- and rutile-coated filter surfaces, in particular for large inclusions. These observations are discussed in relation to the properties of the filters, in particular in terms of, for example, the surface roughness.

  6. Filtration Efficiency of Functionalized Ceramic Foam Filters for Aluminum Melt Filtration

    Science.gov (United States)

    Voigt, Claudia; Jäckel, Eva; Taina, Fabio; Zienert, Tilo; Salomon, Anton; Wolf, Gotthard; Aneziris, Christos G.; Le Brun, Pierre

    2016-12-01

    The influence of filter surface chemistry on the filtration efficiency of cast aluminum alloys was evaluated for four different filter coating compositions (Al2O3—alumina, MgAl2O4—spinel, 3Al2O3·2SiO2—mullite, and TiO2—rutile). The tests were conducted on a laboratory scale with a filtration pilot plant, which facilitates long-term filtration tests (40 to 76 minutes). This test set-up allows the simultaneous use of two LiMCAs (before and after the filter) for the determination of the efficiency of inclusion removal. The four tested filter surface chemistries exhibited good thermal stability and mechanical robustness after 750 kg of molten aluminum had been cast. All four filter types exhibited a mean filtration efficiency of at least 80 pct. However, differences were also observed. The highest filtration efficiencies were obtained with alumina- and spinel-coated filter surfaces (>90 pct), and the complete removal of the largest inclusions (>90 µm) was observed. The efficiency was slightly lower with mullite- and rutile-coated filter surfaces, in particular for large inclusions. These observations are discussed in relation to the properties of the filters, in particular in terms of, for example, the surface roughness.

  7. Transfer and transport of aluminum in filtration unit

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Aluminum salt coagulants were used prevalently in various water works. In this article, the effects of filtration on residual aluminum concentration and species distribution were researched by determining the concentration of different Aluminum species before and after single layer filter, double layer filter, and membrane filtration units. In the research, size exclusion chromatography (SEC) was used to separate colloidal and soluble aluminum, ion exchange chromatography (IEC) was used to separate organic and inorganic aluminum, and inductivity coupled plasma-atomic emission spectrometry (ICP-AES) was used to determine the aluminum concentration. The results showed that the rapid filtration process had the ability of removing residual aluminum from coagulant effluent water, and that double layer filtration was more effective in residual aluminum removal than single layer filtration, while Nano filtration was more effective than micro filtration. It was found that when the residual aluminum concentration was below 1mg/L in sediment effluent, the residual aluminum concentration in treated water was above 0.2 mg/L. The direct rapid filtration process mainly removed the suspended aluminum. The removal of soluble and colloidal aluminum was always less than 10% and the natural small particles that adsorbed the amount of soluble or small particles aluminum on their surface were difficult to be removed in this process. Micro filtration and nano filtration were good technologies for removing aluminum; the residual aluminum concentration in the effluent was less than 0.05 mg/L.

  8. Martingale representation property in progressively enlarged filtrations

    CERN Document Server

    Jeanblanc, M

    2012-01-01

    Consider $\\mathbb{G}$ the progressive enlargement of a filtration $\\mathbb{F}$ with a random time $\\tau$. Assuming that, in $\\mathbb{F}$, the martingale representation property holds, we examine conditions under which the martingale representation property holds also in $\\mathbb{G}$. It is noted that the classical results on this subject are no more sufficient to deal with all examples coming from credit risk modeling. In this paper, we introduce a new methodology which extends the various classical results and applies on recent examples.

  9. Integration of membrane filtration and photoelectrocatalysis using a TiO{sub 2}/carbon/Al{sub 2}O{sub 3} membrane for enhanced water treatment

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Guanlong; Chen, Shuo, E-mail: shuochen@dlut.edu.cn; Yu, Hongtao; Quan, Xie

    2015-12-15

    Highlights: • Membrane filtration was integrated with photoelectrocatalysis for water treatment. • This integrated process (PECM) displays good antifouling capacity in NOMs removal. • PECM process enables efficient removal of chemical contaminants (e.g., RhB). • Enhanced charge separation of PECM process leads to its improved performance. - Abstract: Coupling membrane filtration with photocatalysis provides multifunction involving filtration and photocatalytic degradation for removing pollutants from water, but the performance of photocatalytic membrane is limited due to the quick recombination of photogenerated electron-holes in photocatalytic layer. Herein, a TiO{sub 2}/carbon/Al{sub 2}O{sub 3} membrane was designed and constructed through sequentially depositing graphitic carbon layer with good electro-conductivity and TiO{sub 2} nanoparticles layer with photocatalytic activity on Al{sub 2}O{sub 3} membrane support. When light irradiated on the membrane with a voltage supply, the photogenerated electrons could be drained from photocatalytic layer and separated with holes efficiently, thus endowing the membrane with photoelectrocatalytic function. Membrane performance tests indicated that the photoelectrocatalytic membrane filtration (PECM) showed improved removal of natural organic matters (NOMs) and permeate flux with increasing voltage supply. For PECM process at 1.0 V, its NOMs removal was 1.2 or 1.7 times higher than that of filtration with UV irradiation or filtration alone, and its stable permeate flux was 1.3 or 3 times higher than that of filtration with UV irradiation or filtration alone. Moreover, the PECM process exhibited special advantage in removing organic chemicals (e.g., Rhodamine B), which displayed 1.3 or 3 times higher removal than that of filtration with UV irradiation or filtration alone.

  10. Ultrastructural model for size selectivity in glomerular filtration.

    Science.gov (United States)

    Edwards, A; Daniels, B S; Deen, W M

    1999-06-01

    A theoretical model was developed to relate the size selectivity of the glomerular barrier to the structural characteristics of the individual layers of the capillary wall. Thicknesses and other linear dimensions were evaluated, where possible, from previous electron microscopic studies. The glomerular basement membrane (GBM) was represented as a homogeneous material characterized by a Darcy permeability and by size-dependent hindrance coefficients for diffusion and convection, respectively; those coefficients were estimated from recent data obtained with isolated rat GBM. The filtration slit diaphragm was modeled as a single row of cylindrical fibers of equal radius but nonuniform spacing. The resistances of the remainder of the slit channel, and of the endothelial fenestrae, to macromolecule movement were calculated to be negligible. The slit diaphragm was found to be the most restrictive part of the barrier. Because of that, macromolecule concentrations in the GBM increased, rather than decreased, in the direction of flow. Thus the overall sieving coefficient (ratio of Bowman's space concentration to that in plasma) was predicted to be larger for the intact capillary wall than for a hypothetical structure with no GBM. In other words, because the slit diaphragm and GBM do not act independently, the overall sieving coefficient is not simply the product of those for GBM alone and the slit diaphragm alone. Whereas the calculated sieving coefficients were sensitive to the structural features of the slit diaphragm and to the GBM hindrance coefficients, variations in GBM thickness or filtration slit frequency were predicted to have little effect. The ability of the ultrastructural model to represent fractional clearance data in vivo was at least equal to that of conventional pore models with the same number of adjustable parameters. The main strength of the present approach, however, is that it provides a framework for relating structural findings to the size

  11. Low-cost multi-stage filtration enhanced by coagulation-flocculation in upflow gravel filtration

    NARCIS (Netherlands)

    Sanchez, L.D.; Marin, L.M.; Visscher, J.T.; Rietveld, L.C.

    2012-01-01

    This paper assesses the operational and design aspects of coagulation and flocculation in upflow gravel filters (CF-UGF) in a multi-stage filtration (MSF) plant. This study shows that CF-UGF units improve the performance of MSF considerably, when the system operates with turbidity above 30 NTU. It s

  12. Dynamic optimization of a dead-end filtration trajectory : Non-ideal cake filtration

    NARCIS (Netherlands)

    Blankert, Bastiaan; Kattenbelt, Carolien; Betlem, Ben H.L.; Roffel, Brian

    2007-01-01

    A control strategy aimed at minimizing energy consumption is formulated for non-ideal dead-end cake filtration with an inside-out hollow fiber ultrafiltration membrane system. The non-ideal behavior was assumed to originate from cake compression, non-linear cake resistance and a variable pump effici

  13. Dynamic optimization of a dead-end filtration trajectory : Blocking filtration laws

    NARCIS (Netherlands)

    Blankert, Bastiaan; Betlem, Ben H.L.; Roffel, Brian

    2006-01-01

    An operating model for dead-end membrane filtration is proposed based on the well-known blocking laws. The resulting model contains three parameters representing, the operating strategy, the fouling mechanism and the fouling potential of the feed. The optimal control strategy is determined by minimi

  14. Measured performance of filtration and ventilation systems for fine and ultrafine particles and ozone in an unoccupied modern California house

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Delp, William W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Black, Douglas R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walker, Iain S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-12-01

    This study evaluated nine ventilation and filtration systems in an unoccupied 2006 house located 250m downwind of the I-80 freeway in Sacramento, California. Systems were evaluated for reducing indoor concentrations of outdoor particles in summer and fall/winter, ozone in summer, and particles from stir-fry cooking. Air exchange rate was measured continuously. Energy use was estimated for year-round operation in California. Exhaust ventilation without enhanced filtration produced indoor PM2.5 that was 70% lower than outdoors. Supply ventilation with MERV13 filtration provided slightly less protection whereas supply MERV16 filtration reduced PM2.55 by 97-98% relative to outdoors. Supply filtration systems used little energy but provided no benefits for indoor-generated particles. Systems with MERV13-16 filters in the recirculating heating and cooling unit (FAU) operating continuously or 20 min/h reduced PM2.5 by 93-98%. Across all systems, removal percentages were higher for ultrafine particles and lower for black carbon, relative to PM2.5. Indoor ozone was 3-4% of outdoors for all systems except an electronic air cleaner that produced ozone. Filtration via the FAU or portable filtration units lowered PM2.5 by 25-75% when operated over the hour following cooking. The energy for year-round operation of FAU filtration with an efficient blower motor was estimated at 600 kWh/year.

  15. METC CFD simulations of hot gas filtration

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, T.J.

    1995-06-01

    Computational Fluid Dynamic (CFD) simulations of the fluid/particle flow in several hot gas filtration vessels will be presented. These simulations have been useful in designing filtration vessels and in diagnosing problems with filter operation. The simulations were performed using the commercial code FLUENT and the METC-developed code MFIX. Simulations of the initial configuration of the Karhula facility indicated that the dirty gas flow over the filter assemblage was very non-uniform. The force of the dirty gas inlet flow was inducing a large circulation pattern that caused flow around the candles to be in opposite directions on opposite sides of the vessel. By introducing a system of baffles, a more uniform flow pattern was developed. This modification may have contributed to the success of the project. Several simulations of configurations proposed by Industrial Filter and Pump were performed, varying the position of the inlet. A detailed resolution of the geometry of the candles allowed determination of the flow between the individual candles. Recent simulations in support of the METC/CeraMem Cooperative Research and Development Agreement have analyzed the flow in the vessel during the cleaning back-pulse. Visualization of experiments at the CeraMem cold-flow facility provided confidence in the use of CFD. Extensive simulations were then performed to assist in the design of the hot test facility being built by Ahlstrom/Pyropower. These tests are intended to demonstrate the CeraMem technology.

  16. Diatomite releases silica during spirit filtration.

    Science.gov (United States)

    Gómez, J; Gil, M L A; de la Rosa-Fox, N; Alguacil, M

    2014-09-15

    The purpose of this study was to ascertain whether diatomite is an inert filter aid during spirit filtration. Surely, any compound with a negative effect on the spirit composition or the consumer's health could be dissolved. In this study different diatomites were treated with 36% vol. ethanol/water mixtures and the amounts and structures of the extracted compounds were determined. Furthermore, Brandy de Jerez was diatomite- and membrane-filtered at different temperatures and the silicon content was analysed. It was found that up to 0.36% by weight of diatomite dissolved in the aqueous ethanol and amorphous silica, in the form of hollow spherical microparticles, was the most abundant component. Silicon concentrations in Brandy de Jerez increased by up to 163.0% after contact with diatomite and these changes were more marked for calcined diatomite. In contrast, reductions of more than 30% in silicon concentrations were achieved after membrane filtration at low temperatures. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Tailoring Supramolecular Nanofibers for Air Filtration Applications.

    Science.gov (United States)

    Weiss, Daniel; Skrybeck, Dominik; Misslitz, Holger; Nardini, David; Kern, Alexander; Kreger, Klaus; Schmidt, Hans-Werner

    2016-06-15

    The demand of new materials and processes for nanofiber fabrication to enhance the performance of air filters is steadily increasing. Typical approaches to obtain nanofibers are based on top-down processes such as melt blowing, centrifugal spinning, and electrospinning of polymer materials. However, fabrication of polymer nanofibers is limited with respect to either a sufficiently high throughput or the smallest achievable fiber diameter. This study reports comprehensively on a fast and simple bottom-up process to prepare supramolecular nanofibers in situ inside viscose/polyester microfiber nonwovens. Here, selected small molecules of the materials class of 1,3,5-benzenetrisamides are employed. The microfiber-nanofiber composites exhibit a homogeneous nanofiber distribution and morphology throughout the entire nonwoven scaffold. Small changes in molecular structure and processing solvent have a strong influence on the final nanofiber diameter and diameter distribution and, consequently, on the filtration performance. Choosing proper processing conditions, microfiber-nanofiber composites with surprisingly high filtration efficiencies of particulate matter are obtained. In addition, the microfiber-nanofiber composite integrity at elevated temperatures was determined and revealed that the morphology of supramolecular nanofibers is maintained compared to that of the utilized polymer nonwoven.

  18. Renal filtration function in patients with gout

    Directory of Open Access Journals (Sweden)

    N. N. Kushnarenko

    2016-01-01

    Full Text Available Aim. To study circadian blood pressure (BP profile in patients with gout depending on the presence of arterial hypertension (HT and their relationship to the renal filtration function.Material and methods. Patients with gout (n=87 were included into the study. All the patients underwent ambulatory BP monitoring (ABPM with the assessment of circadian BP profile, determination of uric acid serum levels, glomerular filtration rate (GFR was evaluated by CKD-EPI method. Depending on GFR level, all the patients were divided into 2 groups - with renal dysfunction or without one.Results. ABPM revealed circadian BP dysregulation in 55% of gout patients both with HT and without HT. Chronic kidney disease (CKD was revealed in 72.4% of male patients, with the prevalence in patients with HT (76.6 vs 61%; p<0.001. Correlations between uric acid levels and some ABPM indicators and GFR were determined.Conclusion. Obtained data suggest the contribution of hyperuricemia in disorders of systemic and renal hemodynamics, leading to the early development of CKD.

  19. Riverbed Clogging and Sustainability of Riverbank Filtration

    Directory of Open Access Journals (Sweden)

    Thomas Grischek

    2016-12-01

    Full Text Available Clogging refers to a reduction of riverbed hydraulic conductivity. Due to difficulties in determining the thickness of the clogging layer, the leakage coefficient (L is introduced and used to quantify the recoverable portion of bank filtrate. L was determined at several riverbank filtration (RBF sites in field tests and using an analytical solution. Results were compared with data from similar experiments in the early 1970s and 1991–1993. In the 1980s, severe river water pollution in conjunction with high water abstraction led to partly unsaturated conditions beneath the riverbed. A leakage coefficient L of 5 × 10−7 s−1 was determined. After water quality improvement, L increased to 1–1.5 × 10−6 s−1. An alternative, cost and time efficient method is presented to estimate accurate leakage coefficients. The analytical solution is based on groundwater level monitoring data from observation wells next to the river, which can later feed into numerical models. The analytical approach was able to reflect long-term changes as well as seasonal variations. Recommendations for its application are given based on experience.

  20. A study of dynamic filtration; Um estudo sobre filtracao dinamica

    Energy Technology Data Exchange (ETDEWEB)

    Girao, Joaquim Helder S. [PETROBRAS, Natal, RN (Brazil). Distrito de Perfuracao da Bacia Potiguar. Div. de Tecnicas de Perfuracao

    1989-12-31

    The problems that cause cost increase such as: formation damage and borehole swelling or caving lead us to study the filtration of the liquid part of formation drilling fluid. With the aim of comparing static and dynamic filtration rates, we developed a modest dynamic filtration equipment, consisting of a modified API filter, connected to reservoir by means of a positive injection pump. We carried out various tests, and the results were set in charts and tables. Through these, it is possible to notice how the static and dynamic filtration curves come apart for a same pressure value. We also evaluated the effects of circulation speed, starch concentration and counter pressure. This paper does not include calculations or mathematical models accounting for filtrate invasion radii, but it demonstrates, for example, that cleaning circulation will cause lower filtration rates at lower flows. (author) 5 refs., 11 figs., 14 tabs.

  1. Physicochemical interaction and its influence on deep bed filtration process.

    Science.gov (United States)

    Guo, Jin-long; Meng, Jun; Li, Gui-ping; Luan, Zhao-kun; Tang, Hong-xiao

    2004-01-01

    The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep bed filtration process were also studied theoretically. Through the comparison of the hydraulic and physicochemical forces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the microflocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and the experimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoretical prediction was reasonably consistent with the experimental results under different conditions, which indicated that the regulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of the physicochemical interactions. Further theoretical and experimental research should be carried out to investigate the interaction mechanism and its application in the deep bed filtration and other cases.

  2. In-Water Hull Cleaning & Filtration System

    Science.gov (United States)

    George, Dan

    2015-04-01

    Dan George R & D Mining Technology LinkedIn GRD Franmarine have received the following prestigious awards in 2014 for their research & development of an in-water hull cleaning and filtration system "The Envirocart: Golden Gecko Award for Environmental Excellence; WA Innovator of the Year - Growth Sector; Department of Fisheries - Excellence in Marine Biosecurity Award - Innovation Category; Lloyd's List Asia Awards - Environmental Award; The Australian Innovation Challenge - Environment, Agriculture and Food Category; and Australian Shipping and Maritime Industry Award - Environmental Transport Award. The Envirocart developed and patented by GRD Franmarine is a revolutionary new fully enclosed capture and containment in-water hull cleaning technology. The Envirocart enables soft Silicon based antifouling paints and coatings containing pesticides such as Copper Oxide to be cleaned in situ using a contactless cleaning method. This fully containerised system is now capable of being deployed to remote locations or directly onto a Dive Support Vessel and is rated to offshore specifications. This is the only known method of in-water hull cleaning that complies with the Department of Agriculture Fisheries and Forestry (DAFF) and Department of Fisheries WA (DoF) Guidelines. The primary underwater cleaning tool is a hydraulically powered hull cleaning unit fitted with rotating discs. The discs can be fitted with conventional brushes for glass or epoxy based coatings or a revolutionary new patented blade system which can remove marine biofouling without damaging the antifouling paint (silicone and copper oxide). Additionally there are a patented range of fully enclosed hand cleaning tools for difficult to access niche areas such as anodes and sea chests, providing an innovative total solution that enables in-water cleaning to be conducted in a manner that causes no biological risk to the environment. In full containment mode or when AIS are present, material is pumped

  3. The effect of filter cake viscoelasticity on filtration

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard

    Wastewater is usually treated biologically, and a by-product from this treatment is waste-activated sludge with high water content. Sludge is therefore often filtrated to reduce the volume for handling and disposal, and to minimise the water content before incineration of the sludge. However...... a function of pressure as assumed when using the conventional models. Moreover, it is shown how the existing filtration models can be modified and the filtration process for activated sludge simulated....

  4. Analysis of fouling development under dynamic membrane filtration operation

    OpenAIRE

    Saleem, Mubashir; Alibardi, Luca; Cossu, Raffaello; Lavagnolo, Maria Cristina; Spagni, Alessandro

    2016-01-01

    This research is a contribution towards evaluating the appropriate fouling mechanism responsible for the flux decline under dynamic membrane (DM) filtration and its formation mechanism by using gravity-driven filtration in a specifically designed experimental setup. Series of extended short term filtration experiments were performed at varying operating conditions of mixed liquor suspended solids (MLSS) concentrations, trans-membrane pressures (TMP) and mesh pore sizes. Blocking models were a...

  5. Removal of cytomegalovirus DNA from donor blood by filtration.

    Science.gov (United States)

    Smith, K L; Cobain, T; Dunstan, R A

    1993-04-01

    Blood from five donors, previously shown to be positive for cytomegalovirus (CMV) DNA following polymerase chain reaction (PCR) amplification, was filtered through commercially available leucocyte filters. Analysis of pre- and post-filtration samples by PCR with ethidium bromide staining has shown that filtration was successful in removing CMV DNA from all samples. This is evidence that leucocyte filtration of red cell concentrates may greatly decrease the risk of CMV disease following transfusion to susceptible patients.

  6. Membraneless water filtration using CO2

    Science.gov (United States)

    Shin, Sangwoo; Shardt, Orest; Warren, Patrick; Stone, Howard

    2016-11-01

    Water purification technologies such as ultrafiltration and reverse osmosis utilize porous membranes to remove suspended particles and solutes. These membranes, however, cause many drawbacks such as a high pumping cost and a need for periodic replacement due to fouling. Here we show an alternative membraneless method for separating suspended particles by exposing the colloidal suspension to CO2. Dissolution of CO2 into the suspension creates solute gradients that drive phoretic motion of particles, or so-called diffusiophoresis. Due to the large diffusion potential built up by the dissociation of carbonic acid, colloidal particles move either away from or towards the gas-liquid interface depending on their surface charge. Our findings suggest a means to separate particles without membranes or filters, thus reducing operating and maintenance costs. Using the directed motion of particles induced by exposure to CO2, we demonstrate a scalable, continuous flow, membraneless particle filtration process that exhibits very low pressure drop and is essentially free from fouling.

  7. Dynamical Systems, Cytokine Storms, and Blood Filtration

    Science.gov (United States)

    Foster, Glenn; Hubler, Alfred

    2008-03-01

    Various infections and non-infectious diseases can trigger immune cells and the proteins (cytokines) the cells use to communicate with each other to be caught in a positive feedback loop; this ``cytokine storm'' is frequently fatal. By examining the network of cytokine-immune cell interactions we will illustrate why anti-mediator drugs have been generally ineffective in stopping this feedback. A more effective approach may be to try and reduce interactions by dampening many signals at once by filtering the cytokines out of the blood directly (think dialysis). We will argue that feedback on an out of control nonlinear dynamical system is easier to understand than its normal healthy state and apply filtration to a toy model of immune response.

  8. Pattern recognition using inverse resonance filtration

    CERN Document Server

    Sofina, Olga; Kvetnyy, Roman

    2010-01-01

    An approach to textures pattern recognition based on inverse resonance filtration (IRF) is considered. A set of principal resonance harmonics of textured image signal fluctuations eigen harmonic decomposition (EHD) is used for the IRF design. It was shown that EHD is invariant to textured image linear shift. The recognition of texture is made by transfer of its signal into unstructured signal which simple statistical parameters can be used for texture pattern recognition. Anomalous variations of this signal point on foreign objects. Two methods of 2D EHD parameters estimation are considered with the account of texture signal breaks presence. The first method is based on the linear symmetry model that is not sensitive to signal phase jumps. The condition of characteristic polynomial symmetry provides the model stationarity and periodicity. Second method is based on the eigenvalues problem of matrices pencil projection into principal vectors space of singular values decomposition (SVD) of 2D correlation matrix....

  9. Gravity filtration of suspensions: permeability effects

    Science.gov (United States)

    Soori, Tejaswi; Wang, Mengyu; Ward, Thomas

    2015-11-01

    This paper examines the filtration rates of mono-modal suspensions as a function of time and a cake layer builds up through theory and experimentation. Darcy's Law, which describes fluid flow through porous media, was applied along with the Kynch theory of sedimentation, which provides the basis for analyzing low concentration (ϕ filter media. A CCD camera was used to capture images of the cake formation and fluid drainage processes, and subsequent image and theoretical analysis found the fluid flow experienced a constant pressure loss due to the permeability of the filter media, whereas the experienced pressure loss due to the cake formation varies as a function of time, ϕ and d. The rate of cake formation was also found to be independent of ϕ but dependent on d which can be attributed to a change in porosity affecting permeability. Studies on similar systems with multi-modal suspensions are in-progress.

  10. Batch cooling crystallization and pressure filtration of sulphathiazole: the influence of solvent composition.

    Science.gov (United States)

    Häkkinen, Antti; Pöllänen, Kati; Karjalainen, Milja; Rantanen, Jukka; Louhi-Kultanen, Marjatta; Nyström, Lars

    2005-02-01

    Currently there is a great interest in new process analytical approaches to increase the process understanding of pharmaceutical unit operations. In the present study, the influence of the solvent composition on the material properties and, further, on the filtration characteristics, of different crystal suspensions obtained through an unseeded batch-cooling-crystallization process was studied. Sulphathiazole, which is an antibiotic agent with multiple polymorphic forms, was produced by performing laboratory-scale cooling crystallization experiments from five different mixtures of water and propan-1-ol (n-propanol). The size, shape and polymorphic composition of the crystals produced were characterized with a scanning electron microscope, with a novel automated image analyser and with an X-ray powder diffractometer. All of the monitored crystal properties were found to clearly differ between the samples obtained from different solvents. The crystals produced in the batch-cooling-crystallization experiments were separated from the crystallizing solvents using a batch-type pressure Nutsche filter, and the filtration characteristics of the suspensions were evaluated on the basis of average filter-cake porosities and average specific cake resistances, which were determined from the experimentally obtained filtration data. Comparison between the calculated filtration characteristics revealed that considerable differences existed between the different suspensions, and it could therefore be concluded that the pressure-filtration process was influenced by the composition of the crystallizing solvent. The filterability of all the studied sulphathiazole suspensions was considered to be rather good on the basis of the relatively low cake porosities (0.51-0.63), which were accompanied with low average specific cake resistances [(8.7 x 10(7))-(1.2 x 10(9)) m/kg].

  11. Life Support Filtration System Trade Study for Deep Space Missions

    Science.gov (United States)

    Agui, Juan H.; Perry, Jay L.

    2017-01-01

    The National Aeronautics and Space Administrations (NASA) technical developments for highly reliable life support systems aim to maximize the viability of long duration deep space missions. Among the life support system functions, airborne particulate matter filtration is a significant driver of launch mass because of the large geometry required to provide adequate filtration performance and because of the number of replacement filters needed to a sustain a mission. A trade analysis incorporating various launch, operational and maintenance parameters was conducted to investigate the trade-offs between the various particulate matter filtration configurations. In addition to typical launch parameters such as mass, volume and power, the amount of crew time dedicated to system maintenance becomes an increasingly crucial factor for long duration missions. The trade analysis evaluated these parameters for conventional particulate matter filtration technologies and a new multi-stage particulate matter filtration system under development by NASAs Glenn Research Center. The multi-stage filtration system features modular components that allow for physical configuration flexibility. Specifically, the filtration system components can be configured in distributed, centralized, and hybrid physical layouts that can result in considerable mass savings compared to conventional particulate matter filtration technologies. The trade analysis results are presented and implications for future transit and surface missions are discussed.

  12. Vibrating membrane filtration as improved technology for microalgae dewatering.

    Science.gov (United States)

    Nurra, Claudia; Clavero, Ester; Salvadó, Joan; Torras, Carles

    2014-04-01

    The effect of shear-enhanced filtration by vibratory process in microalgae dewatering is presented in this paper. The aim of this research was to investigate the technical performance and improvement of vibrating membrane filtration compared with conventional tangential cross-flow filtration in microalgae concentration. An industrial-scale available commercial set-up was used. Several membrane materials as polyethersulfone, polyacrylonitrile, etc., and mean pore sizes (from 7000Da to 0.2μm) were tested and compared in both filtration set-ups. Experiments were carried-out with Nannochloropsis gaditana and Phaeodactylum tricornutum microalgae. It has been demonstrated that, even if the choice of the membrane depends on its cut-off, its material and the type of microalgae filtrated, dynamic filtration is always the best technology over a conventional one. If with conventional filtration permeability values were in the vicinity of 10L/h/m(2)/bar in steady state phase, with dynamic filtration these values increased to 30L/h/m(2)/bar or more.

  13. Analysis of the Medium Resistance for Constant Pressure Filtration

    Institute of Scientific and Technical Information of China (English)

    吴燕翔; 王碧玉

    2004-01-01

    A mathematical model for constant pressure filtration is established. The distribution of hydraulic pressure within the cake and the medium resistance are measured. The medium resistance Rm is calculated from the suppositional filtration time Ore. It is demonstrated that Rm is nearly a constant for a given filter cloth.

  14. Purification of contaminated water by filtration through porous glass

    Science.gov (United States)

    Wydeven, T.; Leban, M. I.

    1972-01-01

    Method for purifying water that is contaminated with mineral salts and soluble organic compounds is described. Method consists of high pressure filtration of contaminated water through stabilized porous glass membranes. Procedure for conducting filtration is described. Types of materials by percentage amounts removed from the water are identified.

  15. Filter aids influence on pressure drop across a filtration system

    Science.gov (United States)

    Hajar, S.; Rashid, M.; Nurnadia, A.; Ammar, M. R.; Hasfalina, C. M.

    2017-06-01

    Filter aids is commonly used to reduce pressure drop across air filtration system as it helps to increase the efficiency of filtration of accumulated filter cake. Filtration velocity is one of the main parameters that affect the performance of filter aids material. In this study, a formulated filter aids consisting of PreKot™ and activated carbon mixture (designated as PrekotAC) was tested on PTFE filter media under various filtration velocities of 5, 6, and 8 m/min at a constant material loading of 0.2 mg/mm2. Results showed that pressure drop is highly influenced by filtration velocity where higher filtration velocity leads to a higher pressure drop across the filter cake. It was found that PrekotAC performed better in terms of reducing the pressure drop across the filter cake even at the highest filtration velocity. The diversity in different particle size distribution of non-uniform particle size in the formulated PrekotAC mixture presents a higher permeability causes a lower pressure drop across the accumulated filter cake. The finding suggests that PrekotAC is a promising filter aids material that helps reducing the pressure drop across fabric filtration system.

  16. Scaling and particulate fouling in membrane filtration systems

    NARCIS (Netherlands)

    Boerlage, S.F.E.

    2001-01-01

    In the last decade, pressure driven membrane filtration processes; reverse osmosis, nano, ultra and micro-filtration have undergone steady growth. Drivers for this growth include desalination to combat water scarcity and the removal of various material from water to comply with increasingly stringen

  17. Scaling and particulate fouling in membrane filtration systems

    NARCIS (Netherlands)

    Boerlage, S.F.E.

    2001-01-01

    In the last decade, pressure driven membrane filtration processes; reverse osmosis, nano, ultra and micro-filtration have undergone steady growth. Drivers for this growth include desalination to combat water scarcity and the removal of various material from water to comply with increasingly

  18. Simulation of impaction filtration by a porous filter

    NARCIS (Netherlands)

    Ghazaryan, L.; Lopez Penha, D.J.; Geurts, B.J.; Stolz, S.; Winkelmann, C.; Vafai, K.

    2010-01-01

    We present a new numerical approach for estimating filtration through porous media from first principles. We numerically simulate particle motion as arises in a carrier gas flow. The filtration we look at occurs due to impaction of particles with obstructing surfaces that are contained in the solid

  19. Model and optimization of electromagnetic filtration of metals

    Directory of Open Access Journals (Sweden)

    S. Golak

    2013-04-01

    Full Text Available Electromagnetic buoyancy force causes the movement of non-conducive particles in a conducting liquid under electromagnetic field. The phenomenon allows filtration of small inclusions from molten metals. This paper presents a mathematical model of the filtration process under alternating electromagnetic field and the methodology for maximizing its efficiency.

  20. Evaluation of the effectiveness of the filtration leaching for uranium recovery from uranium ore

    Directory of Open Access Journals (Sweden)

    Bolat Uralbekov

    2015-09-01

    Full Text Available The physical and chemical processes taking place in filtration leaching of uranium from uranium ore sample by sulphuric acid solution have been studied by modern physico-chemical methods (X-ray diffraction, scanning electron spectroscopy, electron probe microanalysis, optical emission spectroscope, ICP OES. Column leaching test was carried out for ore samples obtained from a uranium in-situ leaching (ISL mining site using deluted sulphuricacid to study the evolution of various elements concentration in the pregnant leach solution. It has been shown that the uranium in pregnant solutions appears by dissolution of calcium and magnesium carbonates and uranium minerals as well. It was found the decreasing of filtration coefficient from 0.099 m day-1 to 0.082 m day-1, due to the presence of mechanical and chemical mudding. Partial extraction of uranium (85% from the ore has been explained by the slow diffusion of sulfuric acid to the uranium minerals locates in the cracks of silicate minerals. It was concluded that the studied uranium ore sample according to adverse geotechnical parameters is not suitable for uranium extraction by filtration leaching.

  1. Physicochemical interaction and its influence on deep bed filtration process

    Institute of Scientific and Technical Information of China (English)

    GUO Jin-long; MENG Jun; LI GUI-ping; LUAN Zhao-kun; TANG Hong-xiao

    2004-01-01

    The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. Thephysicochemical interaction forces between the filter media and suspended particles and their influence on deep bedfiltration process were also studied theoretically. Through the comparison of the hydraulic and physicochemicalforces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the micro-flocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and theexperimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoreticalprediction was reasonably consistent with the experimental results under different conditions, which indicated that theregulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of thephysicochemical interactions. Further theoretical and experimental research should be carried out to investigate theinteraction mechanism and its application in the deep bed filtration and other cases.

  2. Screening culture filtrates of fungi for activity against Tylenchulus semipenetrans

    Energy Technology Data Exchange (ETDEWEB)

    Verdejo-Lucas, S.; Viera, A.; Stchigel, A. M.; Sorribas, F. J.

    2009-07-01

    Culture filtrates of 20 fungi isolated from citrus soils were screened for their activity against Tylenchulus semipenetrans in both in vitro and greenhouse tests. The filtrates of Talaromyces cyanescens (isolates 2-4 and 2-5), Paecilomyces lilacinus, Chaetomium robustum, Acremonium strictum, Engyodontium album, Myrothecium verrucaria, Emericella rugulosa, and Tarracomyces gigaspora consistently inhibited the motility of second-stage juveniles at various concentrations of the filtrate. Dose-response models were used to determine the filtrate concentration required to inhibit the motility of 50% of the juveniles (CI50). The culture filtrate of P. lilacinus showed the highest activity with a CI50 value of 58% that differed from that of C. robustum (CI50 = 68%), and A. strictum CI50 = 82%. The culture filtrates of P. lilacinus, E. album, and T. cyanescens 2-5 maintained their activity when autoclaved at 120 degree centigrade for 20 min. The autoclaved filtrate of T. cyanescens 2-4 was more effective at inhibiting juvenile motility (CI50 = 28%) than that of T. cyanescens 2-5 (CI50 = 80%), C. robustum (CI50 = 72 %) and P. lilacinus (CI50 = 72%). The culture filtrate of T. cyanescens 2-4 also inhibited egg hatching. Nematode reproduction on Cleopatra mandarin and Carrizo citrange were respectively reduced by the culture filtrate of P. lilacinus and the autoclaved filtrate of T. cyanescens 2-4. These results support the hypothesis that soil fungi may contribute to regulate nematode densities by the production of secondary metabolites with nematicidal activity. (Author) 30 refs.

  3. Hydrophilicity improvement in polyphenylsulfone nanofibrous filtration membranes through addition of polyethylene glycol

    Science.gov (United States)

    Kiani, Shirin; Mousavi, Seyed Mahmoud; Shahtahmassebi, Nasser; Saljoughi, Ehsan

    2015-12-01

    Novel hydrophilic polyphenylsulfone (PPSU) nanofibrous membrane was prepared by electrospinning of the PPSU solution blended with polyethylene glycol 400 (PEG 400). The influence of the PEG concentration on the membrane characteristics was studied using scanning electron microscopy (SEM), water contact angle measurement, and tensile test. Filtration performance of the membranes was investigated by measurement of pure water flux (PWF) and determination of the rejection values of the pollution indices during treatment of canned beans production wastewater. According to the results, blending the PPSU solution with 10 wt.% PEG 400 resulted in formation of a nanofibrous membrane with high porosity and increased mechanical strength which exhibited a low water contact angle of 8.9° and high water flux of 7920 L/m2h. Flux recovery of the mentioned membrane which was assessed by filtration of a solution containing bovine serum albumin (BSA) was 83% indicating a noticeable antifouling property.

  4. Field Emission Properties of the Graphene Double-Walled Carbon Nanotube Hybrid Films Prepared by Vacuum Filtration and Screen Printing

    OpenAIRE

    Jinzhuo Xu; Tao Feng; Yiwei Chen; Zhuo Sun

    2013-01-01

    The graphene double-walled carbon nanotube (DWCNT) hybrid films were prepared by vacuum filtration and screen printing. Their electron field emission properties have been studied systematically. The electron emission properties of the hybrid films are much better than those of pure DWCNT films and pure graphene films. Comparing with the screen printed films, the vacuum filtered films have many advantages, such as lower turn-on field, higher emission current density, better uniformity, better ...

  5. Sorghum genome sequencing by methylation filtration.

    Directory of Open Access Journals (Sweden)

    Joseph A Bedell

    2005-01-01

    Full Text Available Sorghum bicolor is a close relative of maize and is a staple crop in Africa and much of the developing world because of its superior tolerance of arid growth conditions. We have generated sequence from the hypomethylated portion of the sorghum genome by applying methylation filtration (MF technology. The evidence suggests that 96% of the genes have been sequence tagged, with an average coverage of 65% across their length. Remarkably, this level of gene discovery was accomplished after generating a raw coverage of less than 300 megabases of the 735-megabase genome. MF preferentially captures exons and introns, promoters, microRNAs, and simple sequence repeats, and minimizes interspersed repeats, thus providing a robust view of the functional parts of the genome. The sorghum MF sequence set is beneficial to research on sorghum and is also a powerful resource for comparative genomics among the grasses and across the entire plant kingdom. Thousands of hypothetical gene predictions in rice and Arabidopsis are supported by the sorghum dataset, and genomic similarities highlight evolutionarily conserved regions that will lead to a better understanding of rice and Arabidopsis.

  6. Capturing phosphates with iron enhanced sand filtration.

    Science.gov (United States)

    Erickson, Andrew J; Gulliver, John S; Weiss, Peter T

    2012-06-01

    Most treatment practices for urban runoff capture pollutants such as phosphorus by either settling or filtration while dissolved phosphorus, typically as phosphates, is untreated. Dissolved phosphorus, however, represents an average 45% of total phosphorus in stormwater runoff and can be more than 95%. In this study, a new stormwater treatment technology to capture phosphate, called the Minnesota Filter, is introduced. The filter comprises iron filings mixed with sand and is tested for phosphate removal from synthetic stormwater. Results indicate that sand mixed with 5% iron filings captures an average of 88% phosphate for at least 200 m of treated depth, which is significantly greater than a sand filter without iron filings. Neither incorporation of iron filings into a sand filter nor capture of phosphates onto iron filings in column experiments had a significant effect on the hydraulic conductivity of the filter at mixtures of 5% or less iron by weight. Field applications with up to 10.7% iron were operated over 1 year without detrimental effects upon hydraulic conductivity. A model is applied and fit to column studies to predict the field performance of iron-enhanced sand filters. The model predictions are verified through the predicted performance of the filters in removing phosphates in field applications. Practical applications of the technology, both existing and proposed, are presented so stormwater managers can begin implementation.

  7. Crosslinked polytriazole membranes for organophilic filtration

    KAUST Repository

    Chisca, Stefan

    2016-12-30

    We report the preparation of crosslinked membranes for organophilic filtration, by reacting a new polytriazole with free OH groups, using non-toxic poly (ethylene glycol) diglycidyl ether (PEGDE). The OH-functionalized polymer was obtained by converting the oxadiazole to triazole rings with high yield (98%). The maximum degree of crosslinking is achieved after 6 h of reaction. The crosslinked polytriazole membranes are stable in a wide range of organic solvents and show high creep recovery, indicating the robustness of crosslinked membranes. The influence of different casting solutions and different crosslinking time on the membrane morphology and membrane performance was investigated. The membranes performance was studied in dimethylformamide (DMF) and (tetrahydrofuran) THF. We achieved a permeance for THF of 49 L m−2 h−1 bar−1 for membranes with molecular weight cut off (MWCO) of 7 kg mol−1 and a permeance for THF of 17.5 L m−2 h−1 bar−1 for membranes with MWCO of 3 kg mol−1. Our data indicate that by using the new polytriazole is possible to adjust the pore dimensions of the membranes to have a MWCO, which covers ultra- and nanofiltration range.

  8. Estimating Glomerular Filtration Rate in Older People

    Directory of Open Access Journals (Sweden)

    Sabrina Garasto

    2014-01-01

    Full Text Available We aimed at reviewing age-related changes in kidney structure and function, methods for estimating kidney function, and impact of reduced kidney function on geriatric outcomes, as well as the reliability and applicability of equations for estimating glomerular filtration rate (eGFR in older patients. CKD is associated with different comorbidities and adverse outcomes such as disability and premature death in older populations. Creatinine clearance and other methods for estimating kidney function are not easy to apply in older subjects. Thus, an accurate and reliable method for calculating eGFR would be highly desirable for early detection and management of CKD in this vulnerable population. Equations based on serum creatinine, age, race, and gender have been widely used. However, these equations have their own limitations, and no equation seems better than the other ones in older people. New equations specifically developed for use in older populations, especially those based on serum cystatin C, hold promises. However, further studies are needed to definitely accept them as the reference method to estimate kidney function in older patients in the clinical setting.

  9. Pulmonary interstitial compliance and microvascular filtration coefficient.

    Science.gov (United States)

    Goldberg, H S

    1980-08-01

    Static and dynamic properties governing the fluid movement into the pulmonary interstitium were examined in isolated canine lobes. The system was driven by altering intravascular presure (Piv) when the lobe was isogravimetric (change in weight (W) = 0) and allowing the lobe to become isogravimetric again. By making use of an analogy to charging a capacitor across a resistor, calculation of the filtration coefficient for transvascular fluid movement (KF) and determination of the pressure-volume relationship of the pulmonary interstitial space (Pis-Vis), with a minimum of untested assumptions, was possible. KF was found to be the same for fluid moving out of or into the intravascular space, and when the relationship between Piv and alveolar pressure (PAlv) was constant, KF was independent of transpulmonary pressure (PL). When PAlv exceeded Piv, changes in Piv did not influence KF, suggesting no significant change in either surface area available for fluid transudation or vascular permeability. The Pis-Vis curve for increasing values of Vis and Pis is best described by an exponential relationhip and is independent of PL. However, the Pis-Vis curve with decreasing values of Vis and Pis is dependent on PL.

  10. Sorghum genome sequencing by methylation filtration.

    Science.gov (United States)

    Bedell, Joseph A; Budiman, Muhammad A; Nunberg, Andrew; Citek, Robert W; Robbins, Dan; Jones, Joshua; Flick, Elizabeth; Rholfing, Theresa; Fries, Jason; Bradford, Kourtney; McMenamy, Jennifer; Smith, Michael; Holeman, Heather; Roe, Bruce A; Wiley, Graham; Korf, Ian F; Rabinowicz, Pablo D; Lakey, Nathan; McCombie, W Richard; Jeddeloh, Jeffrey A; Martienssen, Robert A

    2005-01-01

    Sorghum bicolor is a close relative of maize and is a staple crop in Africa and much of the developing world because of its superior tolerance of arid growth conditions. We have generated sequence from the hypomethylated portion of the sorghum genome by applying methylation filtration (MF) technology. The evidence suggests that 96% of the genes have been sequence tagged, with an average coverage of 65% across their length. Remarkably, this level of gene discovery was accomplished after generating a raw coverage of less than 300 megabases of the 735-megabase genome. MF preferentially captures exons and introns, promoters, microRNAs, and simple sequence repeats, and minimizes interspersed repeats, thus providing a robust view of the functional parts of the genome. The sorghum MF sequence set is beneficial to research on sorghum and is also a powerful resource for comparative genomics among the grasses and across the entire plant kingdom. Thousands of hypothetical gene predictions in rice and Arabidopsis are supported by the sorghum dataset, and genomic similarities highlight evolutionarily conserved regions that will lead to a better understanding of rice and Arabidopsis.

  11. Filtration application from recycled expanded polystyrene.

    Science.gov (United States)

    Shin, C

    2006-10-01

    Water-in-oil emulsion with drop size less than 100 mum is difficult to separate. Coalescence filtration is economical and effective for separation of secondary dispersions. Coalescence performance depends on flow rate, bed depth, fiber surface properties, and drop size. The amount of surface area of the fibers directly affects the efficiency. A new recycling method was investigated in the previous work in which polystyrene (PS) sub-mum fibers were electro-spun from recycled expanded polystyrene (EPS). These fibers are mixed with micro glass fibers to modify the glass fiber filter media. The filter media are tested in the separation of water droplets from an emulsion of water droplets in oil. The experimental results in this work show that adding nanofibers to conventional micron sized fibrous filter media improves the separation efficiency of the filter media but also increases the pressure drop. An optimum in the performance occurs (significant increase in efficiency with minimal increase in pressure drop) with the addition of about 4% by mass of 500 nm diameter PS nanofibers to glass fibers for the filters.

  12. Efficient filtration system for paraffin-catalyst slurry separation

    Directory of Open Access Journals (Sweden)

    Khodagholi Mohammad Ali

    2013-01-01

    Full Text Available The filtration efficiency for separating liquid paraffin (or water from a slurry consisting of 25 weight% spherical alumina in a Slurry Bubble Column Reactor (SBCR comprised of a cylindrical tube of 10 cm diameter and 150 cm length was studied. Various differential pressures (ΔP were applied to two separate tubular sintered metal stainless steel filter elements with nominal pore size of 4 and 16μm. The experimental results disclosed that the rate of filtrations increased on applying higher differential pressure to the filter element. Albeit this phenomenon is limited to moderate ΔPs and for ΔP more than 1 bar is neither harmful nor helpful. The highest filtration rates at ΔPs higher than 1 bar were 170 and 248 ml/minute for 4 and 16μm respectively. Using water as the liquid in slurry the rate of filtration enhanced to 4 folds, and this issue reveals impact of viscosity on filtration efficiency clearly. In all situations, the total amount of particles present in the filtrate part never exceeded a few parts per million (ppm. The statistical analysis of the SEM image of the filtrate indicated that by applying higher pressure difference to the filter element the frequency percent of larger particle size increases. The operation of filter cake removing was performed with back flashing of 300 ml of clean liquid with pressures of 3-5 bar of N2 gas.

  13. Resolution of the three dimensional structure of components of the glomerular filtration barrier.

    Science.gov (United States)

    Arkill, Kenton P; Qvortrup, Klaus; Starborg, Tobias; Mantell, Judith M; Knupp, Carlo; Michel, C Charles; Harper, Steve J; Salmon, Andy H J; Squire, John M; Bates, Dave O; Neal, Chris R

    2014-02-01

    The human glomerulus is the primary filtration unit of the kidney, and contains the Glomerular Filtration Barrier (GFB). The GFB had been thought to comprise 3 layers - the endothelium, the basement membrane and the podocyte foot processes. However, recent studies have suggested that at least two additional layers contribute to the function of the GFB, the endothelial glycocalyx on the vascular side, and the sub-podocyte space on the urinary side. To investigate the structure of these additional layers is difficult as it requires three-dimensional reconstruction of delicate sub-microscopic (<1 μm) cellular and extracellular elements. Here we have combined three different advanced electron microscopic techniques that cover multiple orders of magnitude of volume sampled, with a novel staining methodology (Lanthanum Dysprosium Glycosaminoglycan adhesion, or LaDy GAGa), to determine the structural basis of these two additional layers. Serial Block Face Scanning Electron Microscopy (SBF-SEM) was used to generate a 3-D image stack with a volume of a 5.3 x 105 μm3 volume of a whole kidney glomerulus (13% of glomerular volume). Secondly, Focused Ion Beam milling Scanning Electron Microscopy (FIB-SEM) was used to image a filtration region (48 μm3 volume). Lastly Transmission Electron Tomography (Tom-TEM) was performed on a 0.3 μm3 volume to identify the fine structure of the glycocalyx. Tom-TEM clearly showed 20 nm fibre spacing in the glycocalyx, within a limited field of view. FIB-SEM demonstrated, in a far greater field of view, how the glycocalyx structure related to fenestrations and the filtration slits, though without the resolution of TomTEM. SBF-SEM was able to determine the extent of the sub-podocyte space and glycocalyx coverage, without additional heavy metal staining. Neither SBF- nor FIB-SEM suffered the anisotropic shrinkage under the electron beam that is seen with Tom-TEM. These images demonstrate that the three dimensional structure of the GFB can

  14. THE STUDY OF THE FILTRATION EFFICIENCY OF FILTER MATERIAL

    Institute of Scientific and Technical Information of China (English)

    Jia Ruiqing; Wang Luping; Wu Xueping

    2000-01-01

    In this paper, the course of the filtration is analyzed.In order to study the filtration efficiency of the filter material, the computer program was edited.According to the results of the computer program, some important parameters of the filter material are discussed.It shows that the filtration efficiency is closely related to the diameter (d) and the size (b).In addition, by using these results and the computer program, we can analysis the relationship between the fiber structure and filter properties quantitatively.

  15. Additive Difference Schemes for Filtration Problems in Multilayer Systems

    CERN Document Server

    Ayrjan, E A; Pavlush, M; Fedorov, A V

    2000-01-01

    In the present paper difference schemes for solution of the plane filtration problem in multilayer systems are analyzed within the framework of difference schemes general theory. Attention is paid to splitting the schemes on physical processes of filtration along water-carring layers and vertical motion between layers. Some absolutely stable additive difference schemes are obtained the realization of which needs no software modification. Parallel algorithm connected with the solving of the filtration problem in every water-carring layer on a single processor is constructed. Program realization on the multi-processor system SPP2000 at JINR is discussed.

  16. Field Emission Properties of the Graphene Double-Walled Carbon Nanotube Hybrid Films Prepared by Vacuum Filtration and Screen Printing

    Directory of Open Access Journals (Sweden)

    Jinzhuo Xu

    2013-01-01

    Full Text Available The graphene double-walled carbon nanotube (DWCNT hybrid films were prepared by vacuum filtration and screen printing. Their electron field emission properties have been studied systematically. The electron emission properties of the hybrid films are much better than those of pure DWCNT films and pure graphene films. Comparing with the screen printed films, the vacuum filtered films have many advantages, such as lower turn-on field, higher emission current density, better uniformity, better long-term stability, and stronger adhesive strength with conductive substrates. The optimized hybrid films with 20% weight ratio of graphene, which were fabricated by vacuum filtration, show the best electron emission performances with a low turn-on field of 0.50 Vμm−1 (at 1 μAcm−2 and a high field enhancement factor β of 27000.

  17. Filtration performance of microporous ceramic supports.

    Science.gov (United States)

    Belouatek, Aissa; Ouagued, Abdellah; Belhakem, Mustapha; Addou, Ahmed

    2008-04-24

    The use of inorganic membranes in pollution treatment is actually limited by the cost of such membranes. Advantages of inorganic membranes are their chemical, thermal and pH properties. The purpose of this work was the development of microporous ceramic materials based on clay for liquid waste processing. The supports or ceramic filters having various compositions were prepared and thermally treated at 1100 degrees C. The results show that, at the temperature studied, porosity varied according to the support composition from 12% for the double-layered (ceramic) support to 47% for the activated carbon- filled support with a mean pore diameter between 0.8 and 1.3 microm, respectively. Volumes of 5 l of distilled water were filtered tangentially for 3 h under an applied pressure of 3.5 and 5.5 bar. The retention of tubular supports prepared was tested with molecules of varying size (Evans blue, NaCl and Sacharose). The study of the liquid filtration and flow through these supports showed that the retention rate depends on support composition and pore diameter, and solute molecular weight. The S1 support (mixture of barbotine and 1% (w/w) activated carbon) gave a flux for distilled water of 68 L/m2 h while the double-layered support resulted in a flux of 8 L/m2 h for the same solution at the pressure of 3.5 bar. At a pressure of 5.5 bar an increase in the distilled water flux through the various supports was observed. It was significant for the S1 support (230 L/m h).

  18. Understanding and modeling alternating tangential flow filtration for perfusion cell culture.

    Science.gov (United States)

    Kelly, William; Scully, Jennifer; Zhang, Di; Feng, Gang; Lavengood, Mathew; Condon, Jason; Knighton, John; Bhatia, Ravinder

    2014-01-01

    Alternating tangential flow (ATF) filtration has been used with success in the Biopharmaceutical industry as a lower shear technology for cell retention with perfusion cultures. The ATF system is different than tangential flow filtration; however, in that reverse flow is used once per cycle as a means to minimize fouling. Few studies have been reported in the literature that evaluates ATF and how key system variables affect the rate at which ATF filters foul. In this study, an experimental setup was devised that allowed for determination of the time it took for fouling to occur for given mammalian (PER.C6) cell culture cell densities and viabilities as permeate flow rate and antifoam concentration was varied. The experimental results indicate, in accordance with D'Arcy's law, that the average resistance to permeate flow (across a cycle of operation) increases as biological material deposits on the membrane. Scanning electron microscope images of the post-run filtration surface indicated that both cells and antifoam micelles deposit on the membrane. A unique mathematical model, based on the assumption that fouling was due to pore blockage from the cells and micelles in combination, was devised that allowed for estimation of sticking factors for the cells and the micelles on the membrane. This model was then used to accurately predict the increase in transmembane pressure during constant flux operation for an ATF cartridge used for perfusion cell culture.

  19. Water quality and treatment of river bank filtrate

    NARCIS (Netherlands)

    De Vet, W.W.J.M.; Van Genuchten, C.C.A.; Van Loosdrecht, M.C.M.; Van Dijk, J.C.

    2009-01-01

    In drinking water production, river bank filtration has the advantages of dampening peak concentrations of many dissolved components, substantially removing many micropollutants and removing, virtually completely, the pathogens and suspended solids. The production aquifer is not only fed by the

  20. Water quality and treatment of river bank filtrate

    NARCIS (Netherlands)

    De Vet, W.W.J.M.; Van Genuchten, C.C.A.; Van Loosdrecht, M.C.M.; Van Dijk, J.C.

    2010-01-01

    In drinking water production, river bank filtration has the advantages of dampening peak concentrations of many dissolved components, substantially removing many micropollutants and removing, virtually completely, the pathogens and suspended solids. The production aquifer is not only fed by the

  1. Granular bed filtration of high temperature biomass gasification gas.

    Science.gov (United States)

    Stanghelle, Daniel; Slungaard, Torbjørn; Sønju, Otto K

    2007-06-18

    High temperature cleaning of producer gas from biomass gasification has been investigated with a granular filter. Field tests were performed for several hours on a single filter element at about 550 degrees C. The results show cake filtration on the granular material and indicate good filtration of the biomass gasification producer gas. The relatively low pressure drop over the filter during filtration is comparable to those of bag filters. The granular filter can operate with high filtration velocities compared to bag filters and maintain high efficiency and a low residual pressure. This work is a part of the BioSOFC-up project that has a goal of utilizing the producer gas from the gasification plant in a solid oxide fuel cell (SOFC). The BioSOFC-up project will continue to the end of 2007.

  2. Effect of lithium therapy on glomerular filtration rate.

    Science.gov (United States)

    Decina, P; Oliver, J A; Sciacca, R R; Colt, E; Fieve, R R

    1983-08-01

    Patients taking lithium had a slightly higher serum creatinine concentration than controls. Creatinine concentration was independent of lithium level or therapy length, suggesting that lithium decreases glomerular filtration but that this effect is small, noncumulative, and of marginal clinical significance.

  3. Performance of multistage filtration using different filter media ...

    African Journals Online (AJOL)

    Performance of multistage filtration using different filter media against conventional water treatment systems. ... horizontal flow roughing filter (HRF)) as an alternative water treatment technology to the conventional one. A pilot- ... Article Metrics.

  4. Scaling and particulate fouling in membrane filtration systems

    NARCIS (Netherlands)

    Boerlage, S.F.E.

    2001-01-01

    Membrane filtration technologies have emerged as cost competitive and viable techniques in drinking and industrial water production. Despite advancements in membrane manufacturing and technology, membrane scaling and fouling remain major problems and may limit future growth in the industry. Scaling

  5. Advanced treatment of WWTP effluent with filtration leading to a pretreatment technique for membrane filtration.

    Science.gov (United States)

    Scherrenberg, S M; te Kloeze, A M; Janssen, A N; van Nieuwenhuijzen, A F; Menkveld, H W H; Bechger, M; van der Graaf, J H J M

    2010-01-01

    In 2000 the European Union introduced the Water Framework Directive (WFD). The aim of the WFD is having an ecological and chemical balance for all surface waters in Europe in 2015. The European Commission identified 33 priority substances and their maximum allowable concentrations, FHI-values (Fraunhofer Institute), which are specified in the Annex of the WFD. The objective of this research is to achieve the removal of suspended solids, nitrogen and total phosphorus together with priority substances. All these substances will be removed in one filter called a "One Step Total Effluent Polishing filter" i.e. 1-STEP(®) filter. For this purpose a filter pilot plant was tested at the WWTP Horstermeer. The results show that the filter can fulfil the target values in the filtrate water for total nitrogen (2.2 mg Ntotal/L) and total phosphorus (0.15 mg Ptotal/L). The majority of the priority (hazardous) substances in the WWTP effluent are already below the detection limit. Due to the low concentration ranges, the results on the removal of medicine and pesticides are only indicative. A decreasing tendency in the removal efficiency is shown for all measured compounds. The average specific ultrafiltration resistance (SUR) value decrease of the filter is 55% and the final value is always below 5·10(12) m(-2). This indicates that the filtrate water of the filter is very well filterable and can be used as ultrafiltration feedwater.

  6. Effect of Nanofibers on Spore Penetration and Lunar Dust Filtration

    OpenAIRE

    Phil Gibson, Ph.D.; Heidi Schreuder-Gibson, Ph.D.; Robert Stote; Margaret Roylance, Ph.D.; Cathy Capone; Masami Nakagawa, Ph.D.

    2008-01-01

    The results of two separate studies on biological spore penetration and simulated lunar dust filtration illustrate the use of nanofibers in some nonstandard filtration applications (nanofibers are generally defined as having diameters of less than a micron). In the first study, a variety of microporous liners containing microfibers and nanofibers were combined with cotton-based fabrics in order to filter aerosolized spores. The aerosol penetration resistance of the nanofiber-lined fabrics was...

  7. Water Clarity Simulant for K East Basin Filtration Testing

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Andrew J.

    2006-01-20

    This document provides a simulant formulation intended to mimic the behavior of the suspended solids in the K East (KE) Basin fuel storage pool. The simulant will be used to evaluate alternative filtration apparatus to improve Basin water clarity and to possibly replace the existing sandfilter. The simulant was formulated based on the simulant objectives, the key identified parameters important to filtration, the composition and character of the KE Basin suspended sludge particles, and consideration of properties of surrogate materials.

  8. Pesticide removal by combined ozonation and granular activated carbon filtration

    OpenAIRE

    Orlandini, E.

    1999-01-01

    Since the seventies, new water treatment processes have been introduced in the production of drinking water from surface water. Their major aim was to adequately cope with the disinfection of this water, and/or with the removal of pesticides and other organic micropollutants from it. This research focused on Biological Activated Carbon (BAC) filtration, which is a combination of ozonation and GAC filtration. Its general goal was identification and understanding of the mechanisms that underlie...

  9. Filtration ATF in automatic transmissions (AT) of cars

    OpenAIRE

    Tadeusz Dziubak; Paweł Szczepaniak

    2014-01-01

    Functions and conditions of work of suction ATF filters are presented. Requirements ofATF filters are discussed. Sources of contaminations ATF are presented. ATF filtration system wascharacterized. Classification of ATF filters and their selection of design solutions are presented. Filtermaterials used for the production of ATF suction filters are presented and characterized. Conditions ofthe work of suction ATF filters were analyzed. Hydraulic and filtration characteristics are discussed.[b]...

  10. Sampling Rate Independent Filtration Approach for Automatic ECG Delineation

    CERN Document Server

    Chereda, Hryhorii; Tymoshenko, Yury

    2016-01-01

    In this paper different types of ECG automatic delineation approaches were overviewed. A combination of these approaches was used to create sampling rate independent filtration algorithm for automatic ECG delineation that is capable of distinguishing different morphologies of T and P waves and QRS complexes. Created filtration algorithm was compared with algorithme \\`a trous. It was investigated that continuous wavelets transform with proposed automatic adaptation for different sampling rates procedure can be used for delineation problem.

  11. Characterization and modification of particulate properties to enhance filtration performance

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, T.R.; Vann Bush, P.; Robinson, M.S.

    1990-06-01

    The specific objectives of this project are to characterize the particulate properties that determine the filtration performance of fabric filters, and to investigate methods for modifying these particulate properties to enhance filtration performance. Inherent in these objectives is the development of an experimental approach that will lead to full-scale implementation of beneficial conditioning processes identified during the project. The general approach has included a large number of laboratory evaluations to be followed by optional field tests of a new successful conditioning processes performed on a sidestream device. This project was divided into five tasks. The schedule followed for these tasks is shown in Figure 4. Tasks 2 and 3 each focus on one of the two complementary parts of the project. Task 2 Parametric Tests of Ashes and Fabrics, evaluates the degree to which ash properties and fabric design determine filtration performance. Task 3 Survey of Methods to Modify the Particle Filtration Properties, provides a literature review and laboratory study of techniques to modify ash properties. The results of these two tasks were used in Task 4 Proof-of-Concept Tests of Methods to Modify Particle Filtration Properties to demonstrate the effects on filtration performance of modifying ash properties. The findings of all the tasks are summarized in this Final Report. 13 refs.

  12. Wind Turbine Gearbox Oil Filtration and Condition Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Shuangwen

    2015-10-25

    This is an invited presentation for a pre-conference workshop, titled advances and opportunities in lubrication: wind turbine, at the 2015 Society of Tribologists and Lubrication Engineers (STLE) Tribology Frontiers Conference held in Denver, CO. It gives a brief overview of wind turbine gearbox oil filtration and condition monitoring by highlighting typical industry practices and challenges. The presentation starts with an introduction by covering recent growth of global wind industry, reliability challenges, benefits of oil filtration and condition monitoring, and financial incentives to conduct wind operation and maintenance research, which includes gearbox oil filtration and condition monitoring work presented herein. Then, the presentation moves on to oil filtration by stressing the benefits of filtration, discussing typical main- and offline-loop practices, highlighting important factors considered when specifying a filtration system, and illustrating real-world application challenges through a cold-start example. In the next section on oil condition monitoring, a discussion on oil sample analysis, oil debris monitoring, oil cleanliness measurements and filter analysis is given based on testing results mostly obtained by and at NREL, and by pointing out a few challenges with oil sample analysis. The presentation concludes with a brief touch on future research and development (R and D) opportunities. It is hoping that the information presented can inform the STLE community to start or redirect their R and D work to help the wind industry advance.

  13. C*-Algebras over Topological Spaces: Filtrated K-Theory

    CERN Document Server

    Meyer, Ralf

    2008-01-01

    We define the filtrated K-theory of a C*-algebra over a finite topological space X and explain how to construct a spectral sequence that computes the bivariant Kasparov theory over X in terms of filtrated K-theory. For finite spaces with totally ordered lattice of open subsets, this spectral sequence becomes an exact sequence as in the Universal Coefficient Theorem, with the same consequences for classification. We also exhibit an example where filtrated K-theory is not yet a complete invariant. We describe a space with four points and two C*-algebras over this space in the bootstrap class that have isomorphic filtrated K-theory but are not KK(X)-equivalent. For this particular space, we enrich filtrated K-theory by another K-theory functor, so that there is again a Universal Coefficient Theorem. Thus the enriched filtrated K-theory is a complete invariant for purely infinite, stable C*-algebras with this particular spectrum and belonging to the appropriate bootstrap class.

  14. PREPARATION MICRO-FILTRATION CERAMIC MEMBRANE FROM NATURAL ZEOLITE FOR PROCION RED MX8B AND METHYLENE BLUE FILTRATION

    Directory of Open Access Journals (Sweden)

    Dyah Choiriyah

    2015-12-01

    Full Text Available The study of ceramic membrane fabrication from natural zeolite and its utilization for filtration of procion red MX8B and methylene blue has been investigated. The purposes of this study are to determine the effect of pressure on membrane permeability and selectivity and utilize natural zeolite as ceramic membranes procion red MX8B and methylene blue filtration. The membrane was prepared by metide press pellets and then calcined at 850 oC. The membranes were characterized by mechanical test, flux and rejection of dye. The compression test of the membrane found the values of 1369.178 psi in dry conditions to 1388.933 psi in wet conditions. The flux test found that the higher the pressure applied, the flux was increase. However, the high pressure also decreased the selectivity. Rejection test found that the rejection of methylene blue filtration up to 70 %. Meanwhile, procion red MX8B filtration has rejectivity less than 20 %.

  15. Four years experience with filtration systems in commercial nurseries for eliminating Phytophthora species from recirculation water

    Science.gov (United States)

    T. Ufer; M. Posner; H.-P. Wessels; S. Wagner; K. Kaminski; T. Brand; Werres S.

    2008-01-01

    In a four year project, three different filtration systems were tested under commercial nursery conditions to eliminate Phytophthora spp. from irrigation water. Five nurseries were involved in the project. Slow sand filtration systems were tested in three nurseries. In the fourth nursery, a filtration system with lava grains (Shieer® Bio filtration)...

  16. A comparison of facemask and respirator filtration test methods.

    Science.gov (United States)

    Rengasamy, Samy; Shaffer, Ronald; Williams, Brandon; Smit, Sarah

    2017-02-01

    NIOSH published a Federal Register Notice to explore the possibility of incorporating FDA required filtration tests for surgical masks (SMs) in the 42 CFR Part 84 respirator certification process. There have been no published studies comparing the filtration efficiency test methods used for NIOSH certification of N95 filtering facepiece respirators (N95 FFRs) with those used by the FDA for clearance of SMs. To address this issue, filtration efficiencies of "N95 FFRs" including six N95 FFR models and three surgical N95 FFR models, and three SM models were measured using the NIOSH NaCl aerosol test method, and FDA required particulate filtration efficiency (PFE) and bacterial filtration efficiency (BFE) methods, and viral filtration efficiency (VFE) method. Five samples of each model were tested using each method. Both PFE and BFE tests were done using unneutralized particles as per FDA guidance document. PFE was measured using 0.1 µm size polystyrene latex particles and BFE with ∼3.0 µm size particles containing Staphylococcus aureus bacteria. VFE was obtained using ∼3.0 µm size particles containing phiX 174 as the challenge virus and Escherichia coli as the host. Results showed that the efficiencies measured by the NIOSH NaCl method for "N95 FFRs" were from 98.15-99.68% compared to 99.74-99.99% for PFE, 99.62-99.9% for BFE, and 99.8-99.9% for VFE methods. Efficiencies by the NIOSH NaCl method were significantly (p = PFE, BFE, and VFE methods produced no significant difference. The above results show that the NIOSH NaCl method is relatively conservative and is able to identify poorly performing filtration devices. The higher efficiencies obtained using PFE, BFE and VFE methods show that adding these supplemental particle penetration methods will not improve respirator certification.

  17. Silver nanoparticle-doped zirconia capillaries for enhanced bacterial filtration.

    Science.gov (United States)

    Wehling, Julia; Köser, Jan; Lindner, Patrick; Lüder, Christian; Beutel, Sascha; Kroll, Stephen; Rezwan, Kurosch

    2015-03-01

    Membrane clogging and biofilm formation are the most serious problems during water filtration. Silver nanoparticle (Agnano) coatings on filtration membranes can prevent bacterial adhesion and the initiation of biofilm formation. In this study, Agnano are immobilized via direct reduction on porous zirconia capillary membranes to generate a nanocomposite material combining the advantages of ceramics being chemically, thermally and mechanically stable with nanosilver, an efficient broadband bactericide for water decontamination. The filtration of bacterial suspensions of the fecal contaminant Escherichia coli reveals highly efficient bacterial retention capacities of the capillaries of 8 log reduction values, fulfilling the requirements on safe drinking water according to the U.S. Environmental Protection Agency. Maximum bacterial loading capacities of the capillary membranes are determined to be 3×10(9)bacterialcells/750mm(2) capillary surface until back flushing is recommendable. The immobilized Agnano remain accessible and exhibit strong bactericidal properties by killing retained bacteria up to maximum bacterial loads of 6×10(8)bacterialcells/750mm(2) capillary surface and the regenerated membranes regain filtration efficiencies of 95-100%. Silver release is moderate as only 0.8% of the initial silver loading is leached during a three-day filtration experiment leading to average silver contaminant levels of 100μg/L.

  18. Spontaneous water filtration of bio-inspired membrane

    Science.gov (United States)

    Kim, Kiwoong; Kim, Hyejeong; Lee, Sang Joon

    2016-11-01

    Water is one of the most important elements for plants, because it is essential for various metabolic activities. Thus, water management systems of vascular plants, such as water collection and water filtration have been optimized through a long history. In this view point, bio-inspired technologies can be developed by mimicking the nature's strategies for the survival of the fittest. However, most of the underlying biophysical features of the optimized water management systems remain unsolved In this study, the biophysical characteristics of water filtration phenomena in the roots of mangrove are experimentally investigated. To understand water-filtration features of the mangrove, the morphological structures of its roots are analyzed. The electrokinetic properties of the root surface are also examined. Based on the quantitatively analyzed information, filtration of sodium ions in the roots are visualized. Motivated by this mechanism, spontaneous desalination mechanism in the root of mangrove is proposed by combining the electrokinetics and hydrodynamic transportation of ions. This study would be helpful for understanding the water-filtration mechanism of the roots of mangrove and developing a new bio-inspired desalination technology. This research was financially supported by the National Research Foundation (NRF) of Korea (Contract Grant Number: 2008-0061991).

  19. Impact of Acidification on Pollutants Fate and Soil Filtration Function

    Directory of Open Access Journals (Sweden)

    Jarmila Makovniková

    2014-12-01

    Full Text Available The objective of this paper was to investigate the effects of simulated acid load on the fate of inorganic pollutants (Cd, Pb, soil sorption potential, soil filtration func-tion. We made use of a short-term acidification pot experiment with grown plant of spring barley cultivated at 4 different soil types (Fluvisol, Cambisol, Stagnosol, Podzol. The potential of soil filtration was evaluated according to the Eq.: [Soil filtration function]=[Potential of soil sorbents]+[Potential of total content of inor-ganic pollutants]. Potential of soil sorbents (PSS is defined by qualitative (pH, or-ganic matter quality - A400/600 and quantitative factors (carbon content-Cox, humus layer thickness-H according to the Eq.:[PSS]=F(pH+F(A465/665+F(Cox*F(H. Acid load significantly influenced soil sorption potential and thus affected increase in Cd and Pb mobility what was reflected in their transfer into the plants. Results of soil filtration function showed significant change of filtration function in Cambisol.

  20. Water quality and treatment of river bank filtrate

    Directory of Open Access Journals (Sweden)

    W. W. J. M. de Vet

    2010-06-01

    Full Text Available In drinking water production, river bank filtration has the advantages of dampening peak concentrations of many dissolved components, substantially removing many micropollutants and removing, virtually completely, the pathogens and suspended solids. The production aquifer is not only fed by the river bank infiltrate but also by water percolating through covering layers. In the polder areas, these top layers consist of peat and deposits from river sediments and sea intrusions.

    This paper discusses the origin and fate of macro components in river bank filtrate, based on extensive full-scale measurements in well fields and treatment systems of the Drinking Water Company Oasen in the Netherlands. First, it clarifies and illustrates redox reactions and the mixing of river bank filtrate and PW as the dominant processes determining the raw water quality for drinking water production. Next, full-scale results are elaborated on to evaluate trickling filtration as an efficient and proven one-step process to remove methane, iron, ammonium and manganese. The interaction of methane and manganese removal with nitrification in these systems is further analyzed. Methane is mostly stripped during trickling filtration and its removal hardly interferes with nitrification. Under specific conditions, microbial manganese removal may play a dominant role.

  1. Enhancement of fine particle filtration with efficient humidification☆

    Institute of Scientific and Technical Information of China (English)

    Yumei Zhang; Weidong Zhang; Zhengyu Yang; Junteng Liu; Fushen Yang; Ning Li; Le Du⁎

    2016-01-01

    Filtration is one of the most effective methods to remove suspended fine particles from air. In filtration processes, pressure drop of compact dust cake causes problems in efficiency and economy, which has received increasing at-tention and stil remains chal enging. In this study, we developed a novel technique to intensify the filtration of fine particles with efficient humidification. Two strategies for humidification, including ultrasonic atomization and steam humidification (control ing of ambient humidity), were employed and proved to be both effective. The re-generation frequency of the filter could be reduced by 55%with ultrasonic atomization, while steam humidification could lead to a 78%reduction in regeneration frequency. The effect of operating conditions on pressure drop and the mass loading during filtration were investigated. The dust cake showed a loose and porous structure with an opti-mized droplet-to-particle ratio. With the ratio of 1.53 and 0.0282, the maximum mass loading was 552 g·m−2 upon the ultrasonic atomization and 720 g·m−2 upon the steam humidification. The results show that humidification could slow down the increase of pressure drop during filtration and improve the efficiency of process.

  2. Effect of membrane filtration artifacts on dissolved trace element concentrations

    Science.gov (United States)

    Horowitz, Arthur J.; Elrick, Kent A.; Colberg, Mark R.

    1992-01-01

    Among environment scientists, the current and almost universally accepted definition of dissolved constituents is an operational one; only those materials which pass through a 0.45-??m membrane filter are considered to be dissolved. Detailed laboratory and field studies on Fe and Al indicate that a number of factors associated with filtration, other than just pore size, can substantially alter 'dissolved' trace element concentrations; these include: filter type, filter diameter, filtration method, volume of sample processed, suspended sediment concentration, suspended sediment grain-size distribution, concentration of colloids and colloidally associated trace elements and concentration of organic matter. As such, reported filtered-water concentrations employing the same pore size filter may not be equal. Filtration artifacts may lead to the production of chemical data that indicate seasonal or annual 'dissolved' chemical trends which do not reflect actual environmental conditions. Further, the development of worldwide averages for various dissolved chemical constituents, the quantification of geochemical cycles, and the determination of short- or long-term environmental chemical trends may be subject to substantial errors, due to filtration artifacts, when data from the same or multiple sources are combined. Finally, filtration effects could have a substantial impact on various regulatory requirements.

  3. Transforming growth factor-beta and the glomerular filtration barrier

    Directory of Open Access Journals (Sweden)

    Ayesha Ghayur

    2013-03-01

    Full Text Available The increasing burden of chronic kidney disease worldwide and recent advancements in the understanding of pathologic events leading to kidney injury have opened up new potential avenues for therapies to further diminish progression of kidney disease by targeting the glomerular filtration barrier and reducing proteinuria. The glomerular filtration barrier is affected by many different metabolic and immune-mediated injuries. Glomerular endothelial cells, the glomerular basement membrane, and podocytes—the three components of the filtration barrier—work together to prevent the loss of protein and at the same time allow passage of water and smaller molecules. Damage to any of the components of the filtration barrier can initiate proteinuria and renal fibrosis. Transforming growth factor-beta (TGF-β is a pleiotropic cytokine strongly associated with the fibrogenic response. It has a known role in tubulointerstitial fibrosis. In this review we will highlight what is known about TGF-β and how it interacts with the components of glomerular filtration barrier and causes loss of function and proteinuria.

  4. Technology Review of Modern Gas Turbine Inlet Filtration Systems

    Directory of Open Access Journals (Sweden)

    Melissa Wilcox

    2012-01-01

    Full Text Available An inlet air filtration system is essential for the successful operation of a gas turbine. The filtration system protects the gas turbine from harmful debris in the ambient air, which can lead to issues such as FOD, erosion, fouling, and corrosion. These issues if not addressed will result in a shorter operational life and reduced performance of the gas turbine. Modern day filtration systems are comprised of multiple filtration stages. Each stage is selected based on the local operating environment and the performance goals for the gas turbine. Selection of these systems can be a challenging task. This paper provides a review of the considerations for selecting an inlet filtration system by covering (1 the characteristics of filters and filter systems, (2 a review of the many types of filters, (3 a detailed look at the different environments where the gas turbine can operate, (4 a process for evaluating the site where the gas turbine will be or is installed, and (5 a method to compare various filter system options with life cycle cost analysis.

  5. Oviposition Attractancy of Bacterial Culture Filtrates: response of Culex quinquefasciatus

    Directory of Open Access Journals (Sweden)

    S Poonam

    2002-04-01

    Full Text Available Oviposition attractants could be used for monitoring as well as controlling mosquitoes by attracting them to lay eggs at chosen sites. In the present study, culture filtrates of seven bacterial species were tested for their attractancy against gravid females of Culex quinquefasciatus. When their oviposition active indices (OAI were studied, the culture filtrates of Bacillus cereus and Pseudomonas fluorescens exhibited oviposition attractancy (OAI = >0.3 at 100 ppm and the OAI were respectively 0.70 and 0.47. Culture filtrates of B. thuringiensis var. israelensis (wild type, B. t. var. israelensis (mutant and B. sphaericus showed attractancy at 2000 ppm with OAI of respectively 0.71, 0.59 and 0.68. However, the OAI of B. megaterium as well as Azospirillum brasilense was 0.13 (at 2000 ppm, which was less than 0.3 required to be considered them as attractants. When the oviposition attractancy of the bacterial culture filtrates were compared with that of a known oviposition attractant, p-cresol (at 10 ppm, the culture filtrates of B. t. var. israelensis (wild type and B. cereus were found to be more active than p-cresol, respectively with 64.2 and 54.3% oviposition.

  6. Pharmacologic Atrial Natriuretic Peptide Reduces Human Leg Capillary Filtration

    Science.gov (United States)

    Watenpaugh, Donald E.; Vissing, Susanne F.; Lane, Lynda D.; Buckey, Jay C.; Firth, Brian G.; Erdman, William; Hargens, Alan R.; Blomqvist, C. Gunnar

    1995-01-01

    Atrial natriuretic peptide (ANP) is produced and secreted by atrial cells. We measured calf capillary filtration rate with prolonged venous-occlusion plethys-mography of supine health male subjects during pharmacologic infusion of ANP (48 pmol/kg/min for 15 min; n equals 6) and during placebo infusion (n equals 7). Results during infusions were compared to prior control measurements. ANP infusion increased plasma (ANP) from 30 plus or minus 4 to 2,568 plus or minus 595 pmol/L. Systemic hemoconcentration occurred during ANP infusion; mean hematocrit and plasma colloid osmotic pressure increased 4.6 and 11.3 percent respectively, relative to pre-infusion baseline values (p is less than 0.05). Mean calf filtration, however was significantly reduced from 0.15 to 0.08 ml/100 ml/min with ANP. Heart rate increased 20 percent with ANP infusion, wheras blood pressure was unchanged. Calf conductance (blood flow/arterial pressure) and venous compliance were unaffected by ANP infusion. Placebo infusion had no effect relative to prior baseline control measurements. Although ANP induced systemic capillary filtration, in the calf, filtration was reduced with ANP. Therefore, phamacologic ANP infusion enhances capillary filtration from the systemic circulation, perhaps at upper body or splanchic sites or both, while having the opposite effect in the leg.

  7. Filtration des fluides de forage à travers les parois du puits - Bibliographie Filtration of Drilling Fluids Through Borehole Walls

    Directory of Open Access Journals (Sweden)

    Martin M.

    2006-11-01

    Full Text Available Ce document résume un certain nombre de données déjà publiées, relatives à la filtration du fluide de forage, de l'annulaire vers les formations traversées, durant l'approfondissement du puits. On considère : - d'une part, les phénomènes de filtration : . le long des parois (filtration dynamique durant les périodes de circulation - filtration statique durant les arrêts, . sous l'outil ; - d'autre part, certaines de leurs conséquences, en particulier leur influence : . sur la vitesse d'avancement, . sur les risques de coincement de la garniture par pression différentielle, . sur l'envahissement des zones poreuses et perméables. Les phénomènes et leurs conséquences dépendent de très nombreux facteurs dont certains jouent des rôles d'importance très voisine. Leurs études nécessitent des moyens expérimentaux bien adaptés, permettant une simulation suffisamment rigoureuse des conditions de forage. Les résultats ne peuvent être généralisés et doivent être exprimés en fonction des paramètres opératoires choisis. This article reviews varions data which have already been published and which concern the filtration of drilling fluid from the annular space into the formations crossed through during the drilling of a borehole. The following aspects are considered: (i filtration phenomena along borehole walls (dynamic filtration during circulation, and static filtration during shutdowns and underneath the bit; (ii some of the consequences of this filtration, and especially its influence on the rate of penetration, on risks of drill string sticking as the result of differential pressure, and on the invasion of porous and permeable zones. Such phenomena and their consequences depend on a great many factor, some which play roles of quite similar importance. Resaerch on such phenomena requires well suited experimental facilities enabling the sufficiently cllose simulation of drilling conditions. the results of such research

  8. EX-PRESS Glaucoma Filtration Device: efficacy, safety, and predictability.

    Science.gov (United States)

    Chan, Jessica E; Netland, Peter A

    2015-01-01

    Trabeculectomy has been the traditional primary surgical therapy for open-angle glaucoma. While trabeculectomy is effective in lowering intraocular pressure, complications associated with the procedure have motivated the development of alternative techniques and devices, including the EX-PRESS Glaucoma Filtration Device. This review describes the efficacy, safety, complication rates, and potential advantages and disadvantages of the EX-PRESS Glaucoma Filtration Device. EX-PRESS implantation is technically simpler compared with that of trabeculectomy, with fewer surgical steps. Vision recovery has been more rapid after EX-PRESS implantation compared with trabeculectomy. Intraocular pressure variation is lower during the early postoperative period, indicating a more predictable procedure. While efficacy of the EX-PRESS implant has been comparable to trabeculectomy, postoperative complications appear less common after EX-PRESS implantation compared with trabeculectomy. The EX-PRESS Glaucoma Filtration Device appears to be safe and effective in the surgical management of open-angle glaucoma.

  9. The Fundamentals of Waste Water Sludge Characterization and Filtration

    Energy Technology Data Exchange (ETDEWEB)

    Scales, Peter J.; Dixon, David R.; Harbour, Peter J.; Stickland, Anthony D.

    2003-07-01

    The move to greater emphasis on the disposal of waste water sludges through routes such as incineration and the added cost of landfill emplacement puts high demands on dewatering technology for these sludges. A dear problem in this area is that waste water sludges are slow and difficult to dewater and traditional methods of laboratory measurement for prediction of filtration performance are inadequate. This is highly problematic for the design and operational optimisation of centrifuges, filters and settling devices in the waste water industry. The behaviour is assessed as being due to non-linear behaviour of these sludges which negates the use of classical approaches. These approaches utilise the linear portion of a t versus V{sup 2} plot (where t is the time to filtration and V is the specific filtrate volume) to extract a simple Darcian permeability. Without this parameter, a predictive capacity for dewatering using current theory is negated. (author)

  10. Effects of drinking-water filtration on Cryptosporidium seroepidemiology, Scotland.

    Science.gov (United States)

    Ramsay, Colin N; Wagner, Adam P; Robertson, Chris; Smith, Huw V; Pollock, Kevin G J

    2014-01-01

    Continuous exposure to low levels of Cryptosporidium oocysts is associated with production of protective antibodies. We investigated prevalence of antibodies against the 27-kDa Cryptosporidium oocyst antigen among blood donors in 2 areas of Scotland supplied by drinking water from different sources with different filtration standards: Glasgow (not filtered) and Dundee (filtered). During 2006-2009, seroprevalence and risk factor data were collected; this period includes 2007, when enhanced filtration was introduced to the Glasgow supply. A serologic response to the 27-kDa antigen was found for ≈75% of donors in the 2 cohorts combined. Mixed regression modeling indicated a 32% step-change reduction in seroprevalence of antibodies against Cryptosporidium among persons in the Glasgow area, which was associated with introduction of enhanced filtration treatment. Removal of Cryptosporidium oocysts from water reduces the risk for waterborne exposure, sporadic infections, and outbreaks. Paradoxically, however, oocyst removal might lower immunity and increase the risk for infection from other sources.

  11. EFFECT OF KIESELGUHR FILTRATION ON OPTICAL PROPERTIES OF BEER

    Directory of Open Access Journals (Sweden)

    Helena Frančáková

    2013-02-01

    Full Text Available Looks of beer is an important factor which is associated with high clarity. Clarity of beer is a basic precondition of its good marketability and consumer satisfaction. Beer filtration is ideal tool to create required optical properties. There is a high accent on this operation in brewery and minibrewery. The process of filtering removes unwanted haze-active substances in order to increase clarity and overall stability of beer. Objective method to expressing clarity of beer is nephelometric determination of turbidity, which is highly sensitive and achieved by reliable results directly in the units used to express the turbidity values in beer. The objective of our study was to measure haze before and after filtration in various types of beer with different length of lagering. Kieselguhr was used as filtration material. Haze of beer was measured by haze meter in determination under 2 angles and values were expressed in European Brewery Convention units directly.

  12. Perlite filtration of phenolic compounds from cigarette smoke.

    Science.gov (United States)

    Rostami-Charati, Faramarz; Robati, Gholamreza Moradi; Naghizadeh, Farhad; Hosseini, Shahnaz; Chaichi, Mohammad Javad

    2013-01-01

    Adsorption of phenolic compounds and chemical analysis of them from a local production cigarette (named by Farvardin cigarette) smoke have been investigated by using perlite filtration. In this research, the mainstream smoke was tested by three filtration methods: Perlite filter, Cambridge filter and general cigarette filter. Then the used filter was extracted by pure methanol as solvent. After that, the extracted solution was analysed by GC-MS. By this consideration, the phenolic derivatives such as phenol, hydroquinone, resorcinol, pyrocatechol, m-cresol, p-cresol and o-cresol were detected. The structure of the perlite filtration after absorption was studied by SEM. In addition, its chemical structure was investigated by XRD and XRF.

  13. EVALUATION OF EFFECTIVENESS OF HOUSEHOLD DRINKING WATER FILTRATION

    Directory of Open Access Journals (Sweden)

    Karolina Jezierska

    2014-10-01

    Full Text Available The aim of this study was to analyze the effectiveness of household drinking water filtration. This article demonstrates the possibilities of using study on the reaction of ascorbic acid degradation in aqueous solutions to develop a new method for determining the effectiveness of household drinking water filtration. Based on the measurements of absorbance of ascorbic acid a new parameters WCW (Coeffi cient of Water Purity and SF (Filtration Degree were defined. Correlations between the SF and the amount of filtered water (filter usage were investigated. With the filter usage decreasing effectiveness of calcium ions removal and drop of differences in conductivity between the tap and filtered water were observed. SF decreases proportionally to the filter usage and therefore the proposed method can be an effective tool to determine the effectiveness of domestic water filters.

  14. The renal handling of hemoglobin. I. Glomerular filtration.

    Science.gov (United States)

    Bunn, H F; Esham, W T; Bull, R W

    1969-05-01

    The glomerular filtration of hemoglobin (alpha(2)beta(2)) was studied under conditions in which its dissociation into alphabeta dimers was experimentally altered. Rats receiving hemoglobin treated with the sulfhydryl reagent bis(N-maleimidomethyl) ether (BME) showed a much lower renal excretion and prolonged plasma survival as compared with animals injected with untreated hemoglobin. Plasma disappearance was also prolonged in dogs receiving BME hemoglobin. Gel filtration data indicated that under physiological conditions, BME hemoglobin had impaired subunit dissociation. In addition, BME hemoglobin showed a very high oxygen affinity and a decreased rate of auto-oxidation. Glomerular filtration was enhanced under conditions which favor the dissociation of hemoglobin into dimers. Cat hemoglobin, which forms subunits much more extensively than canine hemoglobin, was excreted more readily by the rat kidney. The renal uptake of (59)Fe hemoglobin injected intra-arterially into rabbits varied inversely with the concentration of the injected dose.

  15. Deashing of coal liquids by sonically assisted filtration

    Energy Technology Data Exchange (ETDEWEB)

    Slomka, B.J.

    1994-10-01

    This project seeks to improve the effectiveness and reduce the cost of coal liquefaction by novel applications of sonic and ultrasonic energy. The specific purpose of this project is to develop and improve means for the economical removal of dispersed solid particles of ash, unreacted coal, and spent catalyst from direct and indirect coal liquefaction resids by using sonic or ultrasonic waves. Product streams containing solids are generated in both direct and indirect coal liquefaction processes. Direct coal liquefaction processes generate liquid products which contain solids including coal-originated mineral matter, unreacted coal, and spent dispersed catalyst. The removal of these solids from a product stream is one of the most difficult problems in direct coal liquefaction processes. On this report, results are discussed for sonically assisted crossflow filtration of V-1067 resid, diluted with No. 2 fuel oil, and sonically assisted batch filtrations of solids concentrates from continuous cross-flow filtration experiments.

  16. A novel insight into membrane fouling mechanism regarding gel layer filtration: Flory-Huggins based filtration mechanism.

    Science.gov (United States)

    Lei, Qian; Zhang, Meijia; Shen, Liguo; Li, Renjie; Liao, Bao-Qiang; Lin, Hongjun

    2016-09-15

    This study linked the chemical potential change to high specific filtration resistance (SFR) of gel layer, and then proposed a novel membrane fouling mechanism regarding gel layer filtration, namely, Flory-Huggins based filtration mechanism. A mathematical model for this mechanism was theoretically deduced. Agar was used as a model polymer for gel formation. Simulation of the mathematical model for agar gel showed that volume fraction of polymer and Flory-Huggins interaction parameter were the two key factors governing the gel SFR, whereas, pH and ionic strength were not related with the gel SFR. Filtration tests of gel layer showed that the total SFR value, effects of pH and ionic strength on the gel SFR well agreed with the perditions of model's simulation, indicating the real occurrence of this mechanism and the feasibility of the proposed model. This mechanism can satisfactorily explain the extremely high SFR of gel layer, and improve fundamental insights into membrane fouling regarding gel layer filtration.

  17. A novel insight into membrane fouling mechanism regarding gel layer filtration: Flory-Huggins based filtration mechanism

    Science.gov (United States)

    Lei, Qian; Zhang, Meijia; Shen, Liguo; Li, Renjie; Liao, Bao-Qiang; Lin, Hongjun

    2016-09-01

    This study linked the chemical potential change to high specific filtration resistance (SFR) of gel layer, and then proposed a novel membrane fouling mechanism regarding gel layer filtration, namely, Flory-Huggins based filtration mechanism. A mathematical model for this mechanism was theoretically deduced. Agar was used as a model polymer for gel formation. Simulation of the mathematical model for agar gel showed that volume fraction of polymer and Flory-Huggins interaction parameter were the two key factors governing the gel SFR, whereas, pH and ionic strength were not related with the gel SFR. Filtration tests of gel layer showed that the total SFR value, effects of pH and ionic strength on the gel SFR well agreed with the perditions of model’s simulation, indicating the real occurrence of this mechanism and the feasibility of the proposed model. This mechanism can satisfactorily explain the extremely high SFR of gel layer, and improve fundamental insights into membrane fouling regarding gel layer filtration.

  18. ACTINIDE REMOVAL PROCESS SAMPLE ANALYSIS, CHEMICAL MODELING, AND FILTRATION EVALUATION

    Energy Technology Data Exchange (ETDEWEB)

    Martino, C.; Herman, D.; Pike, J.; Peters, T.

    2014-06-05

    Filtration within the Actinide Removal Process (ARP) currently limits the throughput in interim salt processing at the Savannah River Site. In this process, batches of salt solution with Monosodium Titanate (MST) sorbent are concentrated by crossflow filtration. The filtrate is subsequently processed to remove cesium in the Modular Caustic Side Solvent Extraction Unit (MCU) followed by disposal in saltstone grout. The concentrated MST slurry is washed and sent to the Defense Waste Processing Facility (DWPF) for vitrification. During recent ARP processing, there has been a degradation of filter performance manifested as the inability to maintain high filtrate flux throughout a multi-batch cycle. The objectives of this effort were to characterize the feed streams, to determine if solids (in addition to MST) are precipitating and causing the degraded performance of the filters, and to assess the particle size and rheological data to address potential filtration impacts. Equilibrium modelling with OLI Analyzer{sup TM} and OLI ESP{sup TM} was performed to determine chemical components at risk of precipitation and to simulate the ARP process. The performance of ARP filtration was evaluated to review potential causes of the observed filter behavior. Task activities for this study included extensive physical and chemical analysis of samples from the Late Wash Pump Tank (LWPT) and the Late Wash Hold Tank (LWHT) within ARP as well as samples of the tank farm feed from Tank 49H. The samples from the LWPT and LWHT were obtained from several stages of processing of Salt Batch 6D, Cycle 6, Batch 16.

  19. Pathogen filtration to control plant disease outbreak in greenhouse production

    Science.gov (United States)

    Jeon, Sangho; Krasnow, Charles; Bhalsod, Gemini; Granke, Leah; Harlan, Blair; Hausbeck, Mary; Zhang, Wei

    2016-04-01

    Previous research has been extensively focused on understanding the fate and transport of human microbial pathogens in soil and water environments. However, little is known about the transport of plant pathogens, although these pathogens are often found in irrigation waters and could cause severe crop damage and economical loss. Water mold pathogens including Phytophthora spp. and Pythium spp. are infective to a wide range of vegetable and floriculture crops, and they are primarily harbored in soils and disseminated through water flow. It is challenging to control these pathogens because they often quickly develop resistance to many fungicides. Therefore, this multi-scale study aimed to investigate physical removal of plant pathogens from water by filtration, thus reducing the pathogen exposure risks to crops. In column-scale experiments, we studied controlling factors on the transport and retention of Phytophthora capsici zoospores in saturated columns packed with iron oxide coated-sand and uncoated-sand under varying solution chemistry. Biflagellate zoospores were less retained than encysted zoospores, and lower solution pH and greater iron oxide content increased the retention of encysted zoospores. These results provided insights on environmental dispersal of Phytophthora zoospores in natural soils as well as on developing cost-effective engineered filtration systems for pathogen removal. Using small-scale greenhouse filtration systems, we further investigated the performance of varying filter media (i.e., granular sand, iron oxide coated ceramic porous media, and activated carbon) in mitigating disease outbreaks of Phytophthora and Pythium for greenhouse-grown squash and poinsettia, respectively, in comparison with fungicide treatment. For squash, filtration by iron oxide coated media was more effective in reducing the Phytophthora infection, comparing to sand filtration and fungicide application. For poinsettia, sand filtration performed better in controlling

  20. Simulations of Microbial-Enhanced Oil Recovery: Adsorption and Filtration

    DEFF Research Database (Denmark)

    Nielsen, Sidsel Marie; Nesterov, Igor; Shapiro, Alexander

    2014-01-01

    In the context of microbial-enhanced oil recovery (MEOR) with injection of surfactant-producing bacteria into the reservoir, different types of bacteria attachment and growth scenarios are studied using a 1D simulator. The irreversible bacteria attachment due to filtration similar to the deep bed...... applied to filtration model provides formation of two oil banks during recovery. This feature is not reproduced by application of REA model or DBF with growth in attached phase. This makes it possible to select a right model based on the qualitative analysis of the experimental data. A criterion...

  1. Depot effect of bioactive components in experimental membrane filtrations

    Science.gov (United States)

    Mitev, D.; Peshev, D.; Peev, G.; Peeva, L.

    2017-01-01

    Depot effects were found to be accompanying phenomena of membrane separation processes. Accumulation of target species in the membrane matrix during feasibility tests can hamper proper conclusions or compromise the filtration results. Therefore, we investigated the effects of delayed membrane release of chlorogenic acid and caffeine, considered as key compounds of interest in spent coffee products’ recovery treatment. Permeate fluxes and key components release were studied in course of 24 hours via nanofiltration of pure solvent, both immediately after the mock solution filtration and after idle stay. Conclusions are drawn and recommendations advised for proper analysis of experimental data on membrane screening.

  2. Filtration ATF in automatic transmissions (AT of cars

    Directory of Open Access Journals (Sweden)

    Tadeusz Dziubak

    2014-03-01

    Full Text Available Functions and conditions of work of suction ATF filters are presented. Requirements ofATF filters are discussed. Sources of contaminations ATF are presented. ATF filtration system wascharacterized. Classification of ATF filters and their selection of design solutions are presented. Filtermaterials used for the production of ATF suction filters are presented and characterized. Conditions ofthe work of suction ATF filters were analyzed. Hydraulic and filtration characteristics are discussed.[b]Keywords: AT[/b] — automatic transmissions, ATF — automatic transmission fluid, ATF filter

  3. Low-cost multi-stage filtration enhanced by coagulation-flocculation in upflow gravel filtration

    Directory of Open Access Journals (Sweden)

    L. D. Sánchez

    2012-06-01

    Full Text Available This paper assesses the operational and design aspects of coagulation and flocculation in upflow gravel filters (CF-UGF in a multi-stage filtration (MSF plant. This study shows that CF-UGF units improve the performance of MSF considerably, when the system operates with turbidity above 30 NTU. It strongly reduces the load of particulate material before the water enters in the slow sand filters (SSF and therewith avoids short filter runs and prevents early interruption in SSF operations. The removal efficiency of turbidity in the CF-UGF with coagulant was between 85 and 96%, whereas the average efficiency without coagulant dosing was 46% (range: 21–76%. Operating with coagulant also improves the removal efficiency for total coliforms, E-coli and HPC. No reduction was observed in the microbial activity of the SSF, no obstruction of the SSF bed was demonstrated and SSF runs were maintained between 50 and 70 days for a maximum head loss of 0.70 m. The most important advantage is the flexibility of the system to operate with and without coagulant according to the influent turbidity. It was only necessary for 20% of the time to operate with the coagulant. The CF-UGF unit represented 7% of total construction costs and the O&M cost for the use of coagulant represented only 0.3%.

  4. Low-cost multi-stage filtration enhanced by coagulation-flocculation in upflow gravel filtration

    Directory of Open Access Journals (Sweden)

    L. D. Sánchez

    2012-12-01

    Full Text Available This paper assesses the operational and design aspects of coagulation and flocculation in upflow gravel filters (CF-UGF in a multi-stage filtration (MSF plant. This study shows that CF-UGF units improve the performance of MSF considerably, when the system operates with turbidity above 30 NTU. It strongly reduces the load of particulate material before the water enters in the slow sand filters (SSF and therewith avoids short filter runs and prevents early interruption in SSF operations. The removal efficiency of turbidity in the CF-UGF with coagulant was between 85 and 96%, whereas the average efficiency without coagulant dosing was 46% (range: 21–76%. Operating with coagulant also improves the removal efficiency for total coliforms, E-coli and HPC. No reduction was observed in the microbial activity of the SSF, no obstruction of the SSF bed was demonstrated and SSF runs were maintained between 50 and 70 days for a maximum head loss of 0.70 m. The most important advantage is the flexibility of the system to operate with and without coagulant according to the influent turbidity. It was only necessary for 20% of the time to operate with the coagulant. The CF-UGF unit represented 7% of total construction costs and the O&M cost for the use of coagulant represented only 0.3%.

  5. Equivalent Cake Filtration Model%等效滤饼过滤模型

    Institute of Scientific and Technical Information of China (English)

    徐坦; 朱企新; 陈旭; 李文苹

    2008-01-01

    Cake filtration has been widely used in many chemical processes with more non-Newtonian, highly vis- cous and compressible materials involved. Neither traditional nor modern filtration theory can be applied in practice. "Equivalent cake filtration model" is a recently developed mathematical model to describe cake filtration for both Newtonian and non-Newtonian fluids, in either steady or unsteady filtration stages. This model has two strengths: (1) It can be used to determine equivalent capillary radii and predict filtration quality based on the properties of solid/liquid system and operation parameters; and (2) to calculate cake specific resistance and its variations with time at various cake thickness locations.

  6. A New Solution of the Deep Bed Filtration

    OpenAIRE

    Saatçı, A.M.; Halilsoy, Mustafa

    1987-01-01

    We present a more general solution of the standard deep bed filtration equations which explains the initial improvement of effluent quality as a suspension passes through a porous medium. Our solution gives a good fit to experimental data and predicts the experimental observations. The file in this item is the publisher version (published version) of the article.

  7. Filtration and dewatering: review of literature. [117 references

    Energy Technology Data Exchange (ETDEWEB)

    Gala, H. B.; Chiang, S. H.

    1980-09-01

    Filtration and dewatering are important aspects of any chemical process involved in producing solid product from a slurry. However, these operations are not studied in as much detail as other industrial operations like distillation, absorption, etc. In the past, the design of filtration equipment was considered more of an art than science. Only in the last few years have attempts been made to understand the fundamental mechanism underlying these operations. In this review, the present status of filtration and dewatering is discussed, particularly concerning the models used for predicting the rate of filtration and dewatering. Effects of various parameters, size of particles in the slurry, their shape and method of cake formation, etc., on the characteristics of these operations are analyzed. A separate chapter on the use of these processes in coal cleaning is included. Dewatering of fine coal and refuse has attracted a great deal of attention in recent years. Special problems associated with dewatering of fine coal are discussed. Enhanced methods of dewatering are reviewed and finally areas requiring further research are highlighted.

  8. A high-powered view of the filtration barrier.

    Science.gov (United States)

    Peti-Peterdi, János; Sipos, Arnold

    2010-11-01

    Multiphoton excitation fluorescence microscopy is a powerful noninvasive imaging technique for the deep optical sectioning of living tissues. Its application in several intact tissues is a significant advance in our understanding of organ function, including renal pathophysiological mechanisms. The glomerulus, the filtering unit in the kidney, is one good example of a relatively inaccessible and complex structure, with cell types that are otherwise difficult to study at high resolution in their native environment. In this article, we address the application, advantages, and limitations of this imaging technology for the study of the glomerular filtration barrier and the controversy it recently generated regarding the glomerular filtration of macromolecules. More advanced and accurate multiphoton determinations of the glomerular sieving coefficient that are presented here dismiss previous claims on the filtration of nephrotic levels of albumin. The sieving coefficient of 70-kD dextran was found to be around 0.001. Using a model of focal segmental glomerulosclerosis, increased filtration barrier permeability is restricted only to areas of podocyte damage, consistent with the generally accepted role of podocytes and the glomerular origin of albuminuria. Time-lapse imaging provides new details and important in vivo confirmation of the dynamics of podocyte movement, shedding, replacement, and the role of the parietal epithelial cells and Bowman's capsule in the pathology of glomerulosclerosis.

  9. EVALUATION OF FILTRATION AND DISTILLATION METHODS FOR RECYCLING AUTOMOTIVE COOLANT.

    Science.gov (United States)

    This evaluation addresses the product quality, waste reduction, and economic issues involved in recycling automotive and heavy-duty engine coolants at a New Jersey Department of Transportation garage. The specific recycling units evaluated are based on the technologies of filtrat...

  10. Successful Treatment Of Homozygous Familial Hypercholesterolemia Using Cascade Filtration Plasmapheresis

    Directory of Open Access Journals (Sweden)

    Fatih Kardas

    2012-12-01

    Full Text Available OBJECTIVE: The aim of our study is to discuss the efficacy of low-density lipoprotein-cholesterol (LDL-C apheresis procedure using the cascade filtration system for pediatric patients with homozygous familial hypercholesterolemia (FH, and to clarify the adverse effects and difficulties. METHODS: LDL apheresis using the cascade filtration system was performed in 3 pediatric patients with homozygous FH. In total, 120 apheresis sessions were performed for all patients. RESULTS: Cascade filtration therapy significantly reduced the mean LDL-C values from 418 ± 62 mg/dl to 145 ± 43 mg/dl (p<0.05. We determined an acute mean reduction in the plasma levels of total cholesterol (57.9%, LDL cholesterol (70.8%, and high-density lipoprotein (HDL cholesterol (40.7%. Treatments were well tolerated. The most frequent clinical adverse effects were hypotension in 3 sessions (2.5%, chills/feeling cold (1.7% in 2 sessions, and nausea and vomiting in 3 sessions (2.5%. CONCLUSION: Our experience with three patients using the cascade filtration system were, good clinical outcomes, laboratory findings, safety of usage, minor adverse effects and technical problems.

  11. Modelling contaminant transport for pumping wells in riverbank filtration systems.

    Science.gov (United States)

    Mustafa, Shaymaa; Bahar, Arifah; Aziz, Zainal Abdul; Suratman, Saim

    2016-01-01

    Analytical study of the influence of both the pumping well discharge rate and pumping time on contaminant transport and attenuation is significant for hydrological and environmental science applications. This article provides an analytical solution for investigating the influence of both pumping time and travelling time together for one-dimensional contaminant transport in riverbank filtration systems by using the Green's function approach. The basic aim of the model is to understand how the pumping time and pumping rate, which control the travelling time, can affect the contaminant concentration in riverbank filtration systems. Results of analytical solutions are compared with the results obtained using a MODFLOW numerical model. Graphically, it is found that both analytical and numerical solutions have almost the same behaviour. Additionally, the graphs indicate that any increase in the pumping rate or simulation pumping time should increase the contamination in groundwater. The results from the proposed analytical model are well matched with the data collected from a riverbank filtration site in France. After this validation, the model is then applied to the first pilot project of a riverbank filtration system conducted in Malaysia. Sensitivity analysis results highlight the importance of degradation rates of contaminants on groundwater quality, for which higher utilization rates lead to the faster consumption of pollutants. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Removal of Inclusions from Molten Aluminum by Supergravity Filtration

    Science.gov (United States)

    Song, Gaoyang; Song, Bo; Yang, Zhanbing; Yang, Yuhou; Zhang, Jing

    2016-09-01

    A new approach to removing inclusions from aluminum melt by supergravity filtration was investigated. The molten aluminum containing MgAl2O4 spinel and coarse Al3Ti particles was isothermally filtered with different gravity coefficients, different filtering times, and various filtering temperatures under supergravity field. When the gravity coefficient G ≥ 50, the alloy samples were divided automatically into two parts: the upper residue and the lower filtered aluminum. All inclusions (MgAl2O4 and Al3Ti particles) were nearly intercepted in the upper residue by filter felt with average pore size of 44.78 μm. The removal efficiencies of oxide inclusions and Al3Ti particles exceeded 98 and 90 pct, respectively, at G ≥ 50, t = 2 minutes, T = 973 K (700 °C). Besides, the yield of purified aluminum was up to 92.1 pct at G = 600, t = 2 minutes, and T = 973 K (700 °C). The calculations of centrifugal pressure indicated that supergravity filtration could effectively overcome the pressure drop without meeting the rigorous requirement of height of molten metal, especially for using the fine-pore filter medium. Moreover, cake-mode filtration was the major mechanism of supergravity filtration of molten metal in this work.

  13. DEM Simulation of Particle Clogging in Fiber Filtration

    Science.gov (United States)

    Tao, Ran; Yang, Mengmeng; Li, Shuiqing

    2015-11-01

    The formation of porous particle deposits plays a crucial role in determining the efficiency of filtration process. In this work, an adhesive discrete element method (DEM), in combination with CFD, is developed to dynamically describe these porous deposit structures and the changed flow field between two parallel fibers under the periodic boundary conditions. For the first time, it is clarified that the structures of clogged particles are dependent on both the adhesion parameter (defined as the ratio of interparticle adhesion to particle inertia) and the Stokes number (as an index of impaction efficiency). The relationship between the pressure-drop gradient and the coordination number along the filtration time is explored, which can be used to quantitatively classify the different filtration regimes, i.e., clean filter stage, clogging stage and cake filtration stage. Finally, we investigate the influence of the fiber separation distance on the particle clogging behavior, which affects the collecting efficiency of the fibers significantly. The results suggest that changing the arrangement of fibers can improve the filter performance. This work has been funded by the National Key Basic Research and Development Program (2013CB228506).

  14. Superamphiphobic nanofibrous membranes for effective filtration of fine particles.

    Science.gov (United States)

    Wang, Na; Zhu, Zhigao; Sheng, Junlu; Al-Deyab, Salem S; Yu, Jianyong; Ding, Bin

    2014-08-15

    The worldwide demands are rising for an energy-efficient and cost-effective approach that can provide advanced nanofibrous membranes with high filtration performance and superior antifouling properties. Here we report a novel synthesized fluorinated polyurethane (FPU) modified nanofibrous membrane optimized to achieve oil and non-oil aerosol particle filtration. By employing the FPU incorporation, the polyacrylonitrile/polyurethane (PAN/PU) composite membranes were endowed with superhydrophobicity with a water contact angle of 154° and superoleophobicity with an oil contact angle of 151°. Morphology, surface wettability, porous structure, and filtration performance could be manipulated by tuning the solution composition as well as the hierarchical structure. Furthermore, the as-prepared membranes can capture, for the first time, a range of different oil aerosol particles in a single-unit operation, with >99.9% filtration efficiency, by using the combined contribution of fiber diameter and surface roughness acting on the objective particles. Exemplified here by the construction of superamphiphobic nanofibrous membrane, numerous applications of this medium includes high efficiency particulate air filters, ultra-low penetration air filters, and respiratory protection equipment.

  15. Membrane device and process for mass exchange, separation, and filtration

    Science.gov (United States)

    Liu, Wei; Canfield, Nathan L.

    2016-11-15

    A membrane device and processes for fabrication and for using are disclosed. The membrane device may include a number of porous metal membranes that provide a high membrane surface area per unit volume. The membrane device provides various operation modes that enhance throughput and selectivity for mass exchange, mass transfer, separation, and/or filtration applications between feed flow streams and permeate flow streams.

  16. A scalable approach for high throughput branch flow filtration.

    Science.gov (United States)

    Inglis, David W; Herman, Nick

    2013-05-07

    Microfluidic continuous flow filtration methods have the potential for very high size resolution using minimum feature sizes that are larger than the separation size, thereby circumventing the problem of clogging. Branch flow filtration is particularly promising because it has an unlimited dynamic range (ratio of largest passable particle to the smallest separated particle) but suffers from very poor volume throughput because when many branches are used, they cannot be identical if each is to have the same size cut-off. We describe a new iterative approach to the design of branch filtration devices able to overcome this limitation without large dead volumes. This is demonstrated by numerical modelling, fabrication and testing of devices with 20 branches, with dynamic ranges up to 6.9, and high filtration ratios (14-29%) on beads and fungal spores. The filters have a sharp size cutoff (10× depletion for 12% size difference), with large particle rejection equivalent to a 20th order Butterworth low pass filter. The devices are fully scalable, enabling higher throughput and smaller cutoff sizes and they are compatible with ultra low cost fabrication.

  17. Culture: A Filtration Process during Communication in Education.

    Science.gov (United States)

    de Lange, Rudi

    This paper focuses on the filtration process of culture during communication in education with reference to visual elements. An introduction provides a review of some communication models--graphic representations of theories that attempt to predict and explain the process of communication. These simple models are discussed: Aristotle's model of…

  18. Pressure filtration of ceramic pastes. 4: Treatment of experimental data

    Science.gov (United States)

    Torrecillas, A. S.; Polo, J. F.; Perez, A. A.

    1984-01-01

    The use of data processing method based on the algorithm proposed by Kalman and its application to the filtration process at constant pressure are described, as well as the advantages of this method. This technique is compared to the least squares method. The operation allows the precise parameter adjustment of the equation in direct relationship to the specific resistance of the cake.

  19. Novel filtration mode for fouling limitation in membrane bioreactors.

    Science.gov (United States)

    Wu, Jinling; Le-Clech, Pierre; Stuetz, Richard M; Fane, Anthony G; Chen, Vicki

    2008-08-01

    A novel filtration mode is presented to reduce fouling propensity in membrane bioreactors (MBR). During this mode, an elevated high instantaneous flux (60Lm(-2)h(-1)) is initially applied for a short time (120s), followed by a longer filtration (290s) at lower flux (10.3Lm(-2)h(-1)) and a backwash in each filtration cycle. The mixed mode is expected to limit irreversible fouling as the reversible fouling created during the initial stage appears to protect the membrane. Hydraulic performance and the components of foulants were analyzed and compared with conventional continuous and backwash modes. It was found that the mixed mode featured lower trans-membrane pressure (TMP) after 24h of filtration when compared to other modes. The mixed mode was effective in preventing soluble microbial products (SMP) attaching directly onto the membrane surface, keeping the cake layer weakly compressed, and reducing the mixed liquor suspended solids (MLSS) accumulation on the membrane. This strategy reduced the resistances of both the cake layer and the gel layer. A factorial experimental design was carried out for eight runs with different conditions to identify the major operational parameters affecting the hydraulic performances. The results showed that the value of the flux in the initial high-flux period had the most effect on the performance of the mixed mode: high initial flux (60Lm(-2)h(-1)) led to improved performance.

  20. Removal of Inclusions from Molten Aluminum by Supergravity Filtration

    Science.gov (United States)

    Song, Gaoyang; Song, Bo; Yang, Zhanbing; Yang, Yuhou; Zhang, Jing

    2016-12-01

    A new approach to removing inclusions from aluminum melt by supergravity filtration was investigated. The molten aluminum containing MgAl2O4 spinel and coarse Al3Ti particles was isothermally filtered with different gravity coefficients, different filtering times, and various filtering temperatures under supergravity field. When the gravity coefficient G ≥ 50, the alloy samples were divided automatically into two parts: the upper residue and the lower filtered aluminum. All inclusions (MgAl2O4 and Al3Ti particles) were nearly intercepted in the upper residue by filter felt with average pore size of 44.78 μm. The removal efficiencies of oxide inclusions and Al3Ti particles exceeded 98 and 90 pct, respectively, at G ≥ 50, t = 2 minutes, T = 973 K (700 °C). Besides, the yield of purified aluminum was up to 92.1 pct at G = 600, t = 2 minutes, and T = 973 K (700 °C). The calculations of centrifugal pressure indicated that supergravity filtration could effectively overcome the pressure drop without meeting the rigorous requirement of height of molten metal, especially for using the fine-pore filter medium. Moreover, cake-mode filtration was the major mechanism of supergravity filtration of molten metal in this work.

  1. Separation of nanoparticles: Filtration and scavenging from waste incineration plants.

    Science.gov (United States)

    Förster, Henning; Thajudeen, Thaseem; Funk, Christine; Peukert, Wolfgang

    2016-06-01

    Increased amounts of nanoparticles are applied in products of everyday life and despite material recycling efforts, at the end of their life cycle they are fed into waste incineration plants. This raises the question on the fate of nanoparticles during incineration. In terms of environmental impact the key question is how well airborne nanoparticles are removed by separation processes on their way to the bag house filters and by the existing filtration process based on pulse-jet cleanable fibrous filter media. Therefore, we investigate the scavenging and the filtration of metal nanoparticles under typical conditions in waste incineration plants. The scavenging process is investigated by a population balance model while the nanoparticle filtration experiments are realized in a filter test rig. The results show that depending on the particle sizes, in some cases nearly 80% of the nanoparticles are scavenged by fly ash particles before they reach the bag house filter. For the filtration step dust cakes with a pressure drop of 500Pa or higher are found to be very effective in preventing nanoparticles from penetrating through the filter. Thus, regeneration of the filter must be undertaken with care in order to guarantee highly efficient collection of particles even in the lower nanometre size regime.

  2. Membrane filters and membrane-filtration processes for health care.

    Science.gov (United States)

    Eudailey, W A

    1983-11-01

    The development of membrane-filtration processes is reviewed, and current types and uses of membrane filtration in health care is discussed. Development of adequate support structures for filters and of disposable filtration devices has facilitated development of filtration processes for pharmaceutical industry, manufacturing in hospital pharmacies, and direct patient care. Hydrophobic filters have also been developed; aqueous solutions cannot wet the pore structures of these filters and therefore cannot pass. Sterility-testing systems have also been developed. There are two types of filters: depth (constructed of compacted fibers) and membrane (which have a homogeneous internal structure). Depth filters retain only a portion of particles in a particular size range and are generally not acceptable for use in health care. Membrane filters retain all particles of a given size. Types of membrane filters are selected for specific uses based on needed flow rates, particulate load, and retention capability. Membrane filters may be validated using bacterial-passage, bubble-point, and diffusion tests. Most membrane filters used in health care are microporous filters that retain particles in the 0.1-10-micron size range. Applications are currently being developed for ultrafilters, which retain both particles and substances with large molecular structures such as proteins, and reverse-osmosis filter membranes, which allow only water or water-miscible solvents of very low molecular weights to pass. Experience in engineering designs, quality assurance, and test procedures has led to the development of many safe, reliable, and effective membrane products for health care.

  3. Modelling Real World Using Stochastic Processes and Filtration

    Directory of Open Access Journals (Sweden)

    Jaeger Peter

    2016-03-01

    Full Text Available First we give an implementation in Mizar [2] basic important definitions of stochastic finance, i.e. filtration ([9], pp. 183 and 185, adapted stochastic process ([9], p. 185 and predictable stochastic process ([6], p. 224. Second we give some concrete formalization and verification to real world examples.

  4. Reaching ultra low phosphorus concentrations by filtration techniques

    NARCIS (Netherlands)

    Scherrenberg, S.M.

    2011-01-01

    This research deals with tertiary treatment techniques used for the removal of phosphorus from wastewater treatment plant (WWTP) effluent. The main objective of this research is to obtain ultra low total phosphorus (<0.15 mg total phosphorus/L) concentrations by coagulation, flocculation and filtrat

  5. Experiences on dual media filtration of WWTP effluent.

    Science.gov (United States)

    Scherrenberg, S M; Postma, P; Neef, R; Menkveld, H W H; Bechger, M; van der Graaf, J H J M

    2011-01-01

    This research is legislation driven by the European Water Framework Directive (WFD) and the Dutch Fourth Memorandum on Water Management. The objective of this research is to achieve the removal of total nitrogen and total phosphorus by Dual Media Filtration. The target value during this research for total nitrogen is 2.2 mg/L and for total phosphorus 0.15 mg/L. The results show that for NOx-N concentrations in the WWTP effluent up to 10 mg/L, a stable operation of the process can be reached with removal rates of 80% to 90%. The maximum nitrogen removal rate was 3.5 kg N/(m3.d). Above 10 mg/L a risk of filter bed clogging occurred. When the orthophosphorus concentration in the WWTP effluent exceeds the maximum of 0.3 mg/L, the total phosphorus concentration in the filtrate water will exceed the target value of 0.15 mg P-total/L. Temperature has a large impact in the phosphorus removal; the optimum temperature range is within 13 degrees C-18 degrees C. In conclusion, Dual Media Filtration is capable of producing reusable water with total phosphorus concentrations of WWTP effluent with steady concentrations for orthophosphorus (<0.3 mg PO4-P/L). To reach total nitrogen concentrations in the filtrate water of <2.2 mg/L a NOx-N removal efficiency of nearly 100% is required.

  6. RENAL RESERVE FILTRATION CAPACITY IN GROWTH-HORMONE DEFICIENT SUBJECTS

    NARCIS (Netherlands)

    DULLAART, RPF; MEIJER, S; MARBACH, P; SLUITER, WJ

    In normal subjects, the glomerular filtration rate (GFR) and effective renal plasma flow (ERPF) acutely increase in response to infusion of amino acids and to low doses of dopamine. It is uncertain whether circulatory growth hormone (GH) is a permissive factor for these stimulatory effects. GFR and

  7. EVALUATION OF FILTRATION AND DISTILLATION METHODS FOR RECYCLING AUTOMOTIVE COOLANT.

    Science.gov (United States)

    This evaluation addresses the product quality, waste reduction, and economic issues involved in recycling automotive and heavy-duty engine coolants at a New Jersey Department of Transportation garage. The specific recycling units evaluated are based on the technologies of filtrat...

  8. Removal of Brettanomyces bruxellensis from red wine using membrane filtration

    Science.gov (United States)

    While sulfites help limit growth of the spoilage yeast, Brettanomyces, SO2 has been reported to decrease cell size, thereby potentially decreasing the porosities of filtration membranes required for removal. B. bruxellensis strains B1b and F3 were inoculated into red wines and after 12 days, half th...

  9. Simulation of impaction filtration of aerosol droplets in porous media

    NARCIS (Netherlands)

    Ghazaryan, Lilya; Lopez Penha, David J.; Geurts, Bernard J.; Stolz, Steffen; Winkelmann, Christoph; Pereira, J.C.F.; Sequeira, A.; Pereira, J.M.C.

    2010-01-01

    We report on the development of a method to simulate from first principles the particle filtration efficiency of filters that are composed of structured porous media. We assume that the ratio of particle density to the fluid density is high. We concentrate on the motion of the particles in a laminar

  10. An improved method to isolate lichen algae by gel filtration.

    Science.gov (United States)

    Pérez, M J; Vicente, C; Legaz, M E

    1985-08-01

    Photobiont cells of the lichen Evernia prunastri have completely been separated from their fungal partner by filtration through a bed of Sepharose 2B. Both mannitol and ribitol have been quantified by gas-liquid chromatography in the different steps of the isolation procedure. Absence of mannitol, which is exclusively produced by the mycobiont, has been used as the best probe to monitor isolation.

  11. Mechanism of reduced glomerular filtration rate in chronic malnutrition.

    Science.gov (United States)

    Ichikawa, I; Purkerson, M L; Klahr, S; Troy, J L; Martinez-Maldonado, M; Brenner, B M

    1980-05-01

    To determine the physiological basis for the low glomerular filtration rate in chronic malnutrition, micropuncture studies were performed in Munich-Wistar rats chronically pair-fed isocaloric diets of either low (group 1, nine rats) or high protein content (group 2, nine rats). Despite the absence of hypoalbuminemia, average values for single nephron and total kidney glomerular filtration rate were nearly 35% lower in group 1 than in group 2. Mean values for glomerular capillary and Bowman's space hydraulic pressures were essentially identical in the two groups, thereby excluding glomerular transcapillary hydraulic pressure difference as the cause for the low filtration rates in group 1 animals. On the other hand, average glomerular capillary plasma flow rate and glomerular capillary ultrafiltration coefficient were significantly lower (by approximately 25 and approximately 50%, respectively) in group 1 than in group 2. The fall in glomerular capillary plasma flow rate was the consequence of increased afferent and efferent arteriolar resistances. Plasma and erythrocyte volumes were found to be equal in five additional pairs of group 1 and group 2 rats. Thus, the substantial alterations in the ultrafiltration coefficient, glomerular capillary plasma flow rate, and renal arteriolar resistances responsible for the low filtration rate in group 1 animals were not merely a consequence of decreased circulating blood or plasma volumes. Mean values for glomerular cross sectional area were significantly lower in group 1 than in group 2 despite similar values for kidney weight in the two groups. This reduction in glomerular cross sectional area in group 1 rats is presumed to reflect a decrease in effective filtration surface area and therefore likely accounts, at least in part, for the decline in ultrafiltration coefficient observed in this group.Finally, since the daily caloric intake of group 2 animals was restricted because of pair feeding requirements tied to the group 1

  12. Cake filtration modeling: Analytical cake filtration model and filter medium characterization

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Michael

    2008-05-15

    Cake filtration is a unit operation to separate solids from fluids in industrial processes. The build up of a filter cake is usually accompanied with a decrease in overall permeability over the filter leading to an increased pressure drop over the filter. For an incompressible filter cake that builds up on a homogeneous filter cloth, a linear pressure drop profile over time is expected for a constant fluid volume flow. However, experiments show curved pressure drop profiles, which are also attributed to inhomogeneities of the filter (filter medium and/or residual filter cake). In this work, a mathematical filter model is developed to describe the relationship between time and overall permeability. The model considers a filter with an inhomogeneous permeability and accounts for fluid mechanics by a one-dimensional formulation of Darcy's law and for the cake build up by solid continuity. The model can be solved analytically in the time domain. The analytic solution allows for the unambiguous inversion of the model to determine the inhomogeneous permeability from the time resolved overall permeability, e.g. pressure drop measurements. An error estimation of the method is provided by rewriting the model as convolution transformation. This method is applied to simulated and experimental pressure drop data of gas filters with textile filter cloths and various situations with non-uniform flow situations in practical problems are explored. A routine is developed to generate characteristic filter cycles from semi-continuous filter plant operation. The model is modified to investigate the impact of non-uniform dust concentrations. (author). 34 refs., 40 figs., 1 tab

  13. Impacts of extreme flooding on riverbank filtration water quality.

    Science.gov (United States)

    Ascott, M J; Lapworth, D J; Gooddy, D C; Sage, R C; Karapanos, I

    2016-06-01

    Riverbank filtration schemes form a significant component of public water treatment processes on a global level. Understanding the resilience and water quality recovery of these systems following severe flooding is critical for effective water resources management under potential future climate change. This paper assesses the impact of floodplain inundation on the water quality of a shallow aquifer riverbank filtration system and how water quality recovers following an extreme (1 in 17 year, duration >70 days, 7 day inundation) flood event. During the inundation event, riverbank filtrate water quality is dominated by rapid direct recharge and floodwater infiltration (high fraction of surface water, dissolved organic carbon (DOC) >140% baseline values, >1 log increase in micro-organic contaminants, microbial detects and turbidity, low specific electrical conductivity (SEC) 400% baseline). A rapid recovery is observed in water quality with most floodwater impacts only observed for 2-3 weeks after the flooding event and a return to normal groundwater conditions within 6 weeks (lower fraction of surface water, higher SEC, lower DOC, organic and microbial detects, DO). Recovery rates are constrained by the hydrogeological site setting, the abstraction regime and the water quality trends at site boundary conditions. In this case, increased abstraction rates and a high transmissivity aquifer facilitate rapid water quality recoveries, with longer term trends controlled by background river and groundwater qualities. Temporary reductions in abstraction rates appear to slow water quality recoveries. Flexible operating regimes such as the one implemented at this study site are likely to be required if shallow aquifer riverbank filtration systems are to be resilient to future inundation events. Development of a conceptual understanding of hydrochemical boundaries and site hydrogeology through monitoring is required to assess the suitability of a prospective riverbank filtration

  14. Filtration effectiveness of HVAC systems at near-roadway schools.

    Science.gov (United States)

    McCarthy, M C; Ludwig, J F; Brown, S G; Vaughn, D L; Roberts, P T

    2013-06-01

    Concern for the exposure of children attending schools located near busy roadways to toxic, traffic-related air pollutants has raised questions regarding the environmental benefits of advanced heating, ventilation, and air-conditioning (HVAC) filtration systems for near-road pollution. Levels of black carbon and gaseous pollutants were measured at three indoor classroom sites and at seven outdoor monitoring sites at Las Vegas schools. Initial HVAC filtration systems effected a 31-66% reduction in black carbon particle concentrations inside three schools compared with ambient air concentrations. After improved filtration systems were installed, black carbon particle concentrations were reduced by 74-97% inside three classrooms relative to ambient air concentrations. Average black carbon particle concentrations inside the schools with improved filtration systems were lower than typical ambient Las Vegas concentrations by 49-96%. Gaseous pollutants were higher indoors than outdoors. The higher indoor concentrations most likely originated at least partially from indoor sources, which were not targeted as part of this intervention. Recent literature has demonstrated adverse health effects in subjects exposed to ambient air near major roadways. Current smart growth planning and infill development often require that buildings such as schools are built near major roadways. Improving the filtration systems of a school's HVAC system was shown to decrease children's exposure to near-roadway diesel particulate matter. However, reducing exposure to the gas-phase air toxics, which primarily originated from indoor sources, may require multiple filter passes on recirculated air. © 2012 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

  15. The glomerular filtration rate during pregnancy : Saline infusion enhances the glomerular filtration rate in the pregnant rat

    NARCIS (Netherlands)

    Faas, MM; Schuiling, GA; Klok, PA; Valkhof, N; Bakker, WW

    1996-01-01

    The glomerular filtration rate (GFR) of pregnant rats is generally believed to exceed non-pregnant values. This notion is primarily based upon standard inulin clearances. However, the inulin clearance requires continuous infusion of inulin usually dissolved in saline. Since saline infusion per se in

  16. Stochastic modeling of filtrate alkalinity in water filtration devices: Transport through micro/nano porous clay based ceramic materials

    Science.gov (United States)

    Clay and plant materials such as wood are the raw materials used in manufacture of ceramic water filtration devices around the world. A step by step manufacturing procedure which includes initial mixing, molding and sintering is used. The manufactured ceramic filters have numerous pores which help i...

  17. Uncertainty and Sensitivity Analysis of Filtration Models for Non-Fickian transport and Hyperexponential deposition

    DEFF Research Database (Denmark)

    Yuan, Hao; Sin, Gürkan

    2011-01-01

    filtration coefficients, while deposition is more sensitive to filtration coefficients. More experimental measurements at these moments are suggested to determine dispersion coefficients more accurately. More measurements of the steady-state effluent concentration or deposition are suggested to determine...

  18. Characterization, Washing, Leaching, and Filtration of C-104 Sludge

    Energy Technology Data Exchange (ETDEWEB)

    KP Brooks; PR Bredt; GR Golcar; SA Hartley; LK Jagoda; KG Rappe; MW Urie

    2000-06-09

    Approximately 1,400 g of wet Hanford Tank C-104 Sludge was evaluated by Battelle for the high-level waste (HLW) pretreatment processes of ultrafiltration, dilute caustic washing, and elevated-temperature caustic leaching. The filterability of diluted C-104 sludge was measured with a 0.1-{micro}m sintered metal Mott filter using a 24-inch-long, single-element, crossflow filtration system (cells unit filter [CUF]). While the filtrate was being recirculated prior to washing and leaching, a 6.9 wt% solids slurry was evaluated with a matrix of seven 1-hour conditions of varying trans-membrane pressure (30 to 70 psid) and axial velocity (9 to 15 ft/s). The filtrate flux and backpulse efficiency were determined for each condition. The slurry was concentrated to 23 wt% solids, a second matrix of six 1-hour conditions was performed, and data analogous to that recorded in the first matrix were obtained. The low-solids-concentration matrix produced filtrate flux rates that ranged from 0.038 to 0.083 gpm/ft{sup 2}. The high-solids-concentration matrix produced filtrate flux rates that ranged from 0.0095 to 0.0172 gpm/ft{sup 2}. In both cases, the optimum filtrate flux was at the highest axial velocity (15 ft/s) and transmembrane pressure had little effect. Nearly all of the measured filtrate fluxes were more than an order of magnitude greater than the required plant flux for C-104 of 0.00126 gpm/ft{sup 2}. In both matrices, the filtrate flux appeared to be proportional to axial velocity, and the permeability appeared to be inversely proportional to the trans-membrane pressure. The first test condition was repeated as the last test condition for each matrix. In both cases, there was a significant decrease in filtrate flux, indicating some filter fouling during the test matrix that could not be removed by backpulsing alone, although the backpulse number and duration were not optimized. Following testing of these two matrices, the material was washed within the CUF by

  19. High flux filtration medium based on nanofibrous substrate with hydrophilic nanocomposite coating.

    Science.gov (United States)

    Wang, Xuefen; Chen, Xuming; Yoon, Kyunghwan; Fang, Dufei; Hsiao, Benjamin S; Chu, Benjamin

    2005-10-01

    A novel high flux filtration medium, consisting of a three-tier composite structure, i.e., a nonporous hydrophilic nanocomposite coating top layer, an electrospun nanofibrous substrate midlayer, and a conventional nonwoven microfibrous support, was demonstrated for oil/water emulsion separations for the first time. The nanofibrous substrate was prepared by electrospinning of poly(vinyl alcohol) (PVA) followed by chemical cross-linking with glutaraldehyde (GA) in acetone. The resulting cross-linked PVA substrates showed excellent water resistance and good mechanical properties. The top coating was based on a nanocomposite layer containing hydrophilic polyether-b-polyamide copolymer or a cross-linked PVA hydrogel incorporated with surface-oxidized multiwalled carbon nanotubes (MWNTs). Scanning electron microscopy (SEM) examinations indicated that the nanocomposite layer was nonporous within the instrumental resolution and MWNTs were well dispersed in the polymer matrix. Oil/ water emulsion tests showed that this unique type of filtration media exhibited a high flux rate (up to 330 L/m2-h at the feed pressure of 100 psi) and an excellent total organic solute rejection rate (99.8%) without appreciable fouling. The increase in the concentration of surface-oxidized MWNT in the coating layer generally improves the flux rate, which can be attributed to the generation of more effective hydrophilic nanochannels for water passage in the composite membranes.

  20. Physical Characterization of Mouse Deep Vein Thrombosis Derived Microparticles by Differential Filtration with Nanopore Filters

    Directory of Open Access Journals (Sweden)

    Antonio Peramo

    2011-12-01

    Full Text Available With the objective of making advancements in the area of pro-thrombotic microparticle characterization in cardiovascular biology, we present a novel method to separate blood circulating microparticles using a membrane-based, nanopore filtration system. In this qualitative study, electron microscopy observations of these pro-thrombotic mouse microparticles, as well as mouse platelets and leukocytes obtained using a mouse inferior vena cava ligation model of deep-vein thrombosis are presented. In particular, we present mouse microparticle morphology and microstructure using SEM and TEM indicating that they appear to be mostly spherical with diameters in the 100 to 350 nm range. The nanopore filtration technique presented is focused on the development of novel methodologies to isolate and characterize blood circulating microparticles that can be used in conjunction with other methodologies. We believe that determination of microparticle size and structure is a critical step for the development of reliable assays with clinical or research application in thrombosis and it will contribute to the field of nanomedicine in thrombosis.

  1. Static and dynamic filtrations of different clay, electrolytes, polymer systems; Filtrations statiques et dynamiques de differents systemes argile, electrolytes, polymere

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.

    1996-04-16

    Filtration properties of model drilling fluids composed of water, clays, electrolytes and water soluble polymers have been studied in static and dynamic conditions on paper filters and rock slices. Filtration experiments combined with cake observations by cryo-S.E.M. and T.E.M., show the influence of the size shape of clay particles as well as their associating mode in suspension, on the texture of the cake, its permeability, and relaxation properties. These parameters depend on the nature of the electrolyte. The polymer reduces the cake permeability by enhancing the dispersion of the clay within the suspension, but mainly by plugging the porous network due its auto aggregation properties. The cake construction in dynamic conditions, is related to the state of aggregation of the initial suspension, its poly-dispersity, its sensitivity to shear rates, and also, to the permeability of the cake built at the beginning of the filtration. In all cases, the rate of thickening of the cake is slower and larger filtrate volumes are obtained compared to the static conditions. Shear rate has two effects: first, to dissociate the weak aggregates in suspension, second, to impose a size selection of the particles in the case of a poly-dispersed suspension. At high shear rates, a cake of constant thin thickness is quickly obtained. The thickness of this limiting cake depends on the fraction of small particles present in suspension, or that can be formed by dissociation of weak aggregates under shear rate. The permeability of this limiting cake formed in dynamic conditions is, as in static conditions, controlled by the size and the shape of the particles that form the cake or by the presence of a build loss reducer water soluble polymer. Filtrations carried out on Fontainebleau sandstones allow to visualize the internal cake and to precise the risks of formation damage by the drilling fluid. (author) 127 refs.

  2. On influence of some ecological factors on intensity of the oyster filtration (Ostrea edulis

    Directory of Open Access Journals (Sweden)

    N. A. Sitnik

    2009-10-01

    Full Text Available Quantitative regularities of the filtration feeding of the Black Sea oyster depending on some ecological factors were studied. Influence of food concentration on filtration activity of shellfish is described. Dependences of filtration speed are certain on the body mass of oysters under different temperature conditions were found. The seasonal changes of its intensity in the Kerch Strait and the Donuzlav Estuary are illustrated. Influence of water salinity on filtration activity of the oyster is established.

  3. Particulate Matter Filtration Design Considerations for Crewed Spacecraft Life Support Systems

    Science.gov (United States)

    Agui, Juan H.; Vijayakumar, R.; Perry, Jay L.

    2016-01-01

    Particulate matter filtration is a key component of crewed spacecraft cabin ventilation and life support system (LSS) architectures. The basic particulate matter filtration functional requirements as they relate to an exploration vehicle LSS architecture are presented. Particulate matter filtration concepts are reviewed and design considerations are discussed. A concept for a particulate matter filtration architecture suitable for exploration missions is presented. The conceptual architecture considers the results from developmental work and incorporates best practice design considerations.

  4. Mechanics and molecular filtration performance of graphyne nanoweb membranes for selective water purification

    Science.gov (United States)

    Lin, Shangchao; Buehler, Markus J.

    2013-11-01

    Two-dimensional carbon materials such as the 2D nanoweb-like graphyne membrane are promising as molecular sieves for energy and environmental applications. Based on the application of water purification - the removal of contaminants from wastewater and seawater - here we use molecular dynamics (MD) simulations to investigate the interplay between mechanical forces, filtration mechanisms, and overall performance for graphyne membranes with different pore sizes. We carry out biaxial tensile tests and verify the superior mechanical robustness and tolerance of graphyne membranes against possible deformations from the membrane installation process. A possible ultimate stress in excess of 15 GPa and an ultimate strain of 1.2-2.7% are determined. We also demonstrate their excellent filtration performance with barrier-free water permeation and perfect rejection of the representative contaminants considered here, including divalent heavy metal salts (copper sulfate), hydrophobic organic chemicals (benzene and carbon tetrachloride), and inorganic monovalent salts (sodium chloride). We find that graphtriyne, with an effective pore diameter of 3.8 Å, exhibits an optimal purification performance, because the contaminant rejection rate is more sensitive to pore size than water permeability. In addition, we find that the hydrophobic graphyne membranes exhibit higher rejection rates for hydrophilic contaminants compared to the hydrophobic ones. This size exclusion effect is a result of the larger hydrated radii of hydrophilic species due to stronger interactions between them and water molecules. Finally, we find that the maximum deformation of graphtriyne at the ultimate strain before material failure has only a minor impact on its filtration performance. One of the advantages of using graphyne for water purification is that no chemical functionalization or defects need to be introduced, which maintains the structural integrity of the membrane, and possibly, the long-term device

  5. Description of three-phase filtration with a novel dimensionless number

    NARCIS (Netherlands)

    Huizenga, P.; Kuipers, J.A.M.; Swaaij, van W.P.M.

    1998-01-01

    Internal filtration in slurry bubble columns offers a possible solution to the filtration problems related to this reactor type. The applicability of the concept has already been demonstrated at full-scale for wastewater treatment, even though a theoretical description of internal filtration is lack

  6. 40 CFR 141.717 - Pre-filtration treatment toolbox components.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Pre-filtration treatment toolbox... Cryptosporidium Requirements for Microbial Toolbox Components § 141.717 Pre-filtration treatment toolbox... softening stages prior to filtration. Both softening stages must treat the entire plant flow taken from...

  7. 21 CFR 211.46 - Ventilation, air filtration, air heating and cooling.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Ventilation, air filtration, air heating and... Buildings and Facilities § 211.46 Ventilation, air filtration, air heating and cooling. (a) Adequate... holding of a drug product. (c) Air filtration systems, including prefilters and particulate matter...

  8. 75 FR 28295 - Cummins Filtration, Including On-Site Leased Workers From Manpower and Spherion Staffing...

    Science.gov (United States)

    2010-05-20

    ... Employment and Training Administration Cummins Filtration, Including On-Site Leased Workers From Manpower and... workers of Cummins Filtration, including on-site leased workers from Manpower, Lake Mills, Iowa. The... Mills, Iowa location of Cummins Filtration to provide procurement and inventory management services...

  9. Facilitating community water supply treatment : from transferring filtration technology to multi-stakeholder learning

    NARCIS (Netherlands)

    Visscher, J.T.

    2006-01-01

    For more than a quarter of a century, IRC has been supporting the development of Slow Sand Filtration (SSF) and more recently, together with CINARA, the pioneering of Multi-Stage Filtration (MSF) - a combination of Gravel Filtration and SSF that has been shown to have great potential as an effective

  10. 77 FR 38857 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Normal...

    Science.gov (United States)

    2012-06-29

    ... COMMISSION Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Normal..., Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Normal Atmosphere Cleanup Systems..., entitled, ``Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of...

  11. 76 FR 82323 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units

    Science.gov (United States)

    2011-12-30

    ... COMMISSION Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units AGENCY: Nuclear...-1274, ``Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of....'' This guide applies to the design, inspection, and testing of air filtration and iodine adsorption...

  12. Facilitating community water supply treatment : from transferring filtration technology to multi-stakeholder learning

    NARCIS (Netherlands)

    Visscher, J.T.

    2006-01-01

    For more than a quarter of a century, IRC has been supporting the development of Slow Sand Filtration (SSF) and more recently, together with CINARA, the pioneering of Multi-Stage Filtration (MSF) - a combination of Gravel Filtration and SSF that has been shown to have great potential as an effective

  13. Carbon Nanotube Membranes: Synthesis, Properties, and Future Filtration Applications

    Science.gov (United States)

    Rashid, Md. Harun-Or; Ralph, Stephen F.

    2017-01-01

    Over the course of the past decade, there has been growing interest in the development of different types of membranes composed of carbon nanotubes (CNTs), including buckypapers and composite materials, for an ever-widening range of filtration applications. This article provides an overview of how different types of CNT membranes are prepared and the results obtained from investigations into their suitability for different applications. The latter involve the removal of small particles from air samples, the filtration of aqueous solutions containing organic compounds and/or bacteria, and the separation of individual liquids present in mixtures. A growing number of reports have demonstrated that the incorporation of CNTs into composite membranes confers an improved resistance to fouling caused by biomacromolecules and bacteria. These results are discussed, along with evidence that demonstrates it is possible to further reduce fouling by taking advantage of the inherent conductivity of composite membranes containing CNTs, as well as by using different types of electrochemical stimuli. PMID:28468314

  14. NASA Lunar Dust Filtration and Separations Workshop Report

    Science.gov (United States)

    Agui, Juan H.; Stocker, Dennis P.

    2009-01-01

    NASA Glenn Research Center hosted a 2.5-day workshop, entitled "NASA Lunar Dust Filtration and Separations Workshop" at the Ohio Aerospace Institute in Cleveland, Ohio, on November 18 to 20, 2008. The purpose of the workshop was to address the issues and challenges of particulate matter removal from the cabin atmospheres in the Altair lunar lander, lunar habitats, and in pressurized rovers. The presence of lunar regolith dust inside the pressurized volumes was a theme of particular interest. The workshop provided an opportunity for NASA, industry experts, and academia to identify and discuss the capabilities of current and developing air and gas particulate matter filtration and separations technologies as they may apply to NASA s needs. A goal of the workshop was to provide recommendations for strategic research areas in cabin atmospheric particulate matter removal and disposal technologies that will advance and/or supplement the baseline approach for these future lunar surface exploration missions.

  15. Cast Steel Filtration Trials Using Ceramic-Carbon Filters

    Directory of Open Access Journals (Sweden)

    Lipowska B.

    2014-12-01

    Full Text Available Trials of cast steel filtration using two types of newly-developed foam filters in which carbon was the phase binding ceramic particles have been conducted. In one of the filters the source of carbon was flake graphite and coal-tar pitch, while in the other one graphite was replaced by a cheaper carbon precursor. The newly-developed filters are fired at 1000°C, i.e. at a much lower temperature than the currently applied ZrO2-based filters. During filtration trials the filters were subjected to the attack of a flowing metal stream having a temperature of 1650°C for 30 seconds.

  16. Formation of siliceous sediments in brandy after diatomite filtration.

    Science.gov (United States)

    Gómez, J; Gil, M L A; de la Rosa-Fox, N; Alguacil, M

    2015-03-01

    Brandy is quite a stable spirit but sometimes light sediment appears. This sediment was separated and analysed by IR and SEM-EDX. It was revealed that the sediment is composed mostly of silica and residual organic matter. Silica was present as an amorphous phase and as microparticles. In an attempt to reproduce the formation of the sediment, a diatomite extract was prepared with an ethanol/water mixture (36% vol.) and a calcined diatomite similar to that used in brandy filtration. This extract was added to unfiltered brandy in different amounts. After 1 month, the Si concentration decreased in all samples and sediments with similar compositions and features to those found in the unstable brandy appeared. The amounts of sediment obtained were directly related to the decrease in Si concentration in solution. Consequently, it can be concluded that siliceous sediment in brandy originates from Si released during diatomite filtration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Particle flocculation and filtration by high-gradient magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Tsouris, C. [Oak Ridge National Lab., TN (United States); Yiacoumi, S. [Georgie Inst. of Technology, Atlanta, GA (United States)

    1997-01-01

    Flocculation and filtration of micrometer-sized particles in a high-gradient magnetic field (HGMF) were investigated. Experiments were conducted using a cryogenic magnet of 6 Tesla maximum strength. Hematite particles were used for flocculation and filtration experiments. A new approach of using magnetic fields to enhance separation of weakly magnetic particles was also investigated. This approach is based on magnetic seeding which involves flocculation of existing non-magnetic particles with injected paramagnetic particles. A particle-flocculation model was developed based on trajectory analysis. External forces due to gravity and magnetism, and interparticle forces such as electrostatic, hydrodynamic, magnetic dipole, and van der Waals forces, were taken into consideration in these models.

  18. High gradient magnetic filtration and separation. Part II

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, D.

    The paper contains the second part of a two part paper in which the developing role of high grade magnetic filtration and separation (HGMF/S) is reviewed. Part I discussed the increasing potential for the technique and outlined the basic theory behind it. Part II describes the practical application of the technique with particular reference to the beneficiation of fine coal. Aspects considered are: a simple laboratory HGMF/S device; the matrix and its efficency; processing rates in HGMF/S; coal desulphurization and deashing - a potential application of HGMS. The paper concludes that HGMF/S is a process of high potential application as natural particles have a wide variation of magnetic character. Add to this the space saving nature of very powerful superconducting systems and their low energy consumption and it can be safely predicted that HGMF/S will, over time, gain many more applications as whole or part of whole filtration and separation processes. 19 references.

  19. Flocculation, hydrophobic agglomeration and filtration of ultrafine coal

    Science.gov (United States)

    Yu, Zhimin

    In coal preparation plant circuits, fine coal particles are aggregated either by oil agglomeration or by flocculation. In a new hydrophobic agglomeration process, recently developed hydrophobic latices are utilized. While the selectivity of such aggregation processes determines the beneficiation results, the degree of aggregation has a strong effect on fine coal filtration. The aim of this research was to study the fundamentals and analyze the common grounds for these processes, including the potential effect of the coal surface properties. The selective flocculation tests, in which three types of coal, which differed widely in surface wettability, and three additives (hydrophobic latices, a semi-hydrophobic flocculant and a typical hydrophilic polyelectrolyte) were utilized, showed that coal wettability plays a very important role in selective flocculation. The abstraction of a hydrophobic latex on coal and silica revealed that the latex had a much higher affinity towards hydrophobic coal than to hydrophilic mineral matter. As a result, the UBC-1 hydrophobic latex flocculated only hydrophobic coal particles while the polyelectrolyte (PAM) flocculated all the tested coal samples and minerals, showing no selectivity in the fine coal beneficiation. The oil agglomeration was tested using kerosene emulsified with various surfactants (e.g. cationic, anionic and non-ionic). Surfactants enhance not only oil emulsification, hence reducing oil consumption (down to 0.25--0.5%), but also entirely change the electrokinetic properties of the droplets and affect the interaction energy between oil droplets and coal particles. Consequently, the results found in the course of the experimental work strongly indicate that even oxidized coals can be agglomerated if cationic surfactants are used to emulsify the oil. Oil agglomeration of the Ford-4 ultrafine coal showed that even at extremely low oil consumption (0.25 to 0.5%), a clean coal product with an ash content around 5% at over

  20. Review series: The cell biology of renal filtration.

    Science.gov (United States)

    Scott, Rizaldy P; Quaggin, Susan E

    2015-04-27

    The function of the kidney, filtering blood and concentrating metabolic waste into urine, takes place in an intricate and functionally elegant structure called the renal glomerulus. Normal glomerular function retains circulating cells and valuable macromolecular components of plasma in blood, resulting in urine with just trace amounts of proteins. Endothelial cells of glomerular capillaries, the podocytes wrapped around them, and the fused extracellular matrix these cells form altogether comprise the glomerular filtration barrier, a dynamic and highly selective filter that sieves on the basis of molecular size and electrical charge. Current understanding of the structural organization and the cellular and molecular basis of renal filtration draws from studies of human glomerular diseases and animal models of glomerular dysfunction.

  1. Fast filtration for metabolome sampling of suspended animal cells

    OpenAIRE

    Volmer, Martin; Northoff, Stefan; Scholz, Sebastian; Thüte, Tobias; Büntemeyer, Heino; Noll, Thomas

    2010-01-01

    Abstract A new method for sampling suspended animal cells by fast filtration is presented that allows rapid quenching of cellular metabolism and efficient separation of the cells from culture medium. Compared to sampling with a microstructure heat exchanger or centrifugation without prior quenching, the adenylate energy charge and the measured concentrations especially of metabolites with a high turnover rate or of metabolites early in metabolic pathways were substantially higher. ...

  2. EFFECT OF KIESELGUHR FILTRATION ON OPTICAL PROPERTIES OF BEER

    OpenAIRE

    Helena Frančáková; Štefan Dráb; Miriam Solgajová; Žigmund Tóth; Tatiana Bojňanská

    2013-01-01

    Looks of beer is an important factor which is associated with high clarity. Clarity of beer is a basic precondition of its good marketability and consumer satisfaction. Beer filtration is ideal tool to create required optical properties. There is a high accent on this operation in brewery and minibrewery. The process of filtering removes unwanted haze-active substances in order to increase clarity and overall stability of beer. Objective method to expressing clarity of beer is nephelometric d...

  3. The Potentiometric Titration of Filtrates from the Bachmann Process

    Science.gov (United States)

    1942-06-23

    or above, the ferrous sulfato tost was negative anc: tho ph«holdl»ulfoBlc’ IfSt test indicated Less than 100 ppm., of niträte ion in the distillates...to Ü.5). 5. With the exception of two of the early runs, when the pH of the filtrate waa 2.0 or abovt- the ferrous sulfato test in the distillate

  4. Fast filtration for metabolome sampling of suspended animal cells

    OpenAIRE

    Volmer, Martin; Northoff, Stefan; Scholz, Sebastian; Thüte, Tobias; Büntemeyer, Heino; Noll, Thomas

    2010-01-01

    Abstract A new method for sampling suspended animal cells by fast filtration is presented that allows rapid quenching of cellular metabolism and efficient separation of the cells from culture medium. Compared to sampling with a microstructure heat exchanger or centrifugation without prior quenching, the adenylate energy charge and the measured concentrations especially of metabolites with a high turnover rate or of metabolites early in metabolic pathways were substantially higher. ...

  5. Rapid detection of simulated bacteremia by centrifugation and filtration.

    OpenAIRE

    Herlich, M B; Schell, R F; Francisco, M.; Le Frock, J L

    1982-01-01

    A centrifugation-filtration procedure was developed to expedite the recovery of microorganisms from blood. Fresh whole human blood was inoculated with various aerobic and facultatively anaerobic microorganisms (3 to 18 per ml). The seeded blood was carefully overlaid on a Ficoll-Hypaque gradient (density, 1.114 g/ml) and centrifuged (400 x g) for 45 min at ambient temperature. The entire gradient (plasma, leukocytes, and Ficoll-Hypaque) was removed and filtered through a 0.22-micrometer membr...

  6. Plasmapheresis and other extracorporeal filtration techniques in critical patients.

    Science.gov (United States)

    Daga Ruiz, D; Fonseca San Miguel, F; González de Molina, F J; Úbeda-Iglesias, A; Navas Pérez, A; Jannone Forés, R

    2017-04-01

    Plasmapheresis is an extracorporeal technique that eliminates macromolecules involved in pathological processes from plasma. A review is made of the technical aspects, main indications in critical care and potential complications of plasmapheresis, as well as of other extracorporeal filtration techniques such as endotoxin-removal columns and other devices designed to eliminate cytokines or modulate the inflammatory immune response in critical patients. Copyright © 2016 Elsevier España, S.L.U. y SEMICYUC. All rights reserved.

  7. Particle clogging in porous media. Filtration of a smectite solution

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Tobias (Chalmers University of Technology, Goeteborg (Sweden))

    2010-01-15

    The goal of this project is to find out if it is possible for bentonite clay to self heal during leaching with deionized water. The investigation has focused on the formation of a filter cake made of accessory material from MX 80 and the separation of solid material when a smectite solution (1%) is pushed through the cake using a pressure difference of 5 bar. It was also in the scope of this project to design and build the necessary equipment for these experiments. In the literature review it was not found any example that the phenomenon of clogging has been used as a self-healing method previously. It was rather separated also between the clogging of a filter cake (deep bed filtration or cake filtration) and the filtration of colloidal particles. Probably because the latter are in such low concentrations in natural systems and the focus have mainly been in the transport properties of colloids within a filter cake or deep bed filter. An experimental equipment was designed and built. It consists of seven filtration cells that could operate in parallel. All of them are connected to the same source of pressure to ensure equal conditions. A system was also prepared to prevent air from dissolving in the solution because it could create an unwanted expansion in the filter cake due to lower solubility at lower pressure. The experiment showed good separation of smectite particles from the solution when it passed through the filter cake. In all tested cases, the separation was almost complete after long enough time, indicating that the cake has small enough pores to act as a geometrical hinder for the small particles. Comparison between the materials prepared at Chalmers University of Technology and at Clay Technology showed a very good agreement indicating similar properties of the produced smectite

  8. Intra-aortic filtration is effective in collecting hazardous materials.

    Science.gov (United States)

    Mestres, Carlos-A; Bernabeu, Eduardo; Fernández, Claudio; Colli, Andrea; Josa, Miguel

    2007-04-01

    Neurological complications after cardiac operations are mostly due to particle embolization. This case illustrates the embolic potential of any material. A 77-year-old lady underwent re-operation for homograft aortic regurgitation and mitral valve replacement. Intra-aortic filtration was used. After cardiopulmonary bypass the filter was found to have captured a pledget from a suture used to secure the mitral replacement device.

  9. Removal of benzocaine from water by filtration with activated carbon

    Science.gov (United States)

    Howe, G.E.; Bills, T.D.; Marking, L.L.

    1990-01-01

    Benzocaine is a promising candidate for registration with the U.S. Food and Drug Administration for use as an anesthetic in fish culture, management, and research. A method for the removal of benzocaine from hatchery effluents could speed registration of this drug by eliminating requirements for data on its residues, tolerances, detoxification, and environmental hazards. Carbon filtration effectively removes many organic compounds from water. This study tested the effectiveness of three types of activated carbon for removing benzocaine from water by column filtration under controlled laboratory conditions. An adsorptive capacity was calculated for each type of activated carbon. Filtrasorb 400 (12 x 40 mesh; U.S. standard sieve series) showed the greatest capacity for benzocaine adsorption (76.12 mg benzocaine/g carbon); Filtrasorb 300 (8 x 30 mesh) ranked next (31.93 mg/g); and Filtrasorb 816 (8 x 16 mesh) absorbed the least (1.0 mg/g). Increased adsorptive capacity was associated with smaller carbon particle size; however, smaller particle size also impeded column flow. Carbon filtration is a practical means for removing benzocaine from treated water.

  10. The filtration of colloidal gold nanoparticles with carbon nanotubes

    Science.gov (United States)

    de Jong, Frans Jan; Buffet, Adeline

    2016-11-01

    Understanding the local filtering of nanoparticles (NPs) is essential for the development and optimization of medical and industrial applications. Microfocus small-angle X-ray scattering (μSAXS) was used to determine the local filtration kinetics of 100 nm sized colloidal gold nanoparticles (Au NPs) within a multi-walled carbon nanotube (MWCNT) forest. To get a physical insight into the Au NP filtration process within the MWCNT forest a novel model based on the well-known DLVO theory was developed. The DLVO theory is commonly used to describe the interaction between colloidal particles. In addition to the attractive Van de Waals force and the electrostatic double-layer force, a non-DLVO force is added to account for hydration and hydrophobic effects. The model presented here shows that the Au NPs are mainly unfavorably deposited into the so-called secondary energy minimum. This latter finding is in good agreement with the experimental observations and the literature, in which unfavorable particle deposition is related to deposition into the secondary energy minimum. The use of μSAXS to get a physical insight into the local deposition kinetics of submicrometer particles opens up new pathways to optimize the preparation of MWCNT forests for filtration purposes.

  11. Modeling the filtration ability of stockpiled filtering facepiece

    Science.gov (United States)

    Rottach, Dana R.

    2016-03-01

    Filtering facepiece respirators (FFR) are often stockpiled for use during public health emergencies such as an infectious disease outbreak or pandemic. While many stockpile administrators are aware of shelf life limitations, environmental conditions can lead to premature degradation. Filtration performance of a set of FFR retrieved from a storage room with failed environmental controls was measured. Though within the expected shelf life, the filtration ability of several respirators was degraded, allowing twice the penetration of fresh samples. The traditional picture of small particle capture by fibrous filter media qualitatively separates the effect of inertial impaction, interception from the streamline, diffusion, settling, and electrostatic attraction. Most of these mechanisms depend upon stable conformational properties. However, common FFR rely on electrets to achieve their high performance, and over time heat and humidity can cause the electrostatic media to degrade. An extension of the Langevin model with correlations to classical filtration concepts will be presented. The new computational model will be used to predict the change in filter effectiveness as the filter media changes with time.

  12. Are vacuum-filtrated reduced graphene oxide membranes symmetric?

    KAUST Repository

    Tang, Bo

    2015-12-02

    Graphene or reduced graphene oxide (rGO) membrane-based materials are promising for many advanced applications due to their exceptional properties. One of the most widely used synthesis methods for rGO membranes is vacuum filtration of graphene oxide (GO) on a filter membrane, followed by reduction, which shows great advantages such as operational convenience and good controllability. Despite vacuum-filtrated rGO membranes being widely used in many applications, a fundamental question is overlooked: are the top and bottom surfaces of the membranes formed at the interfaces with air and with the filter membrane respectively symmetric or asymmetric? This work, for the first time, reports the asymmetry of the vacuum-filtrated rGO membranes and discloses the filter membranes’ physical imprint on the bottom surface of the rGO membrane, which takes place when the filter membrane surface pores have similar dimension to GO sheets. This result points out that the asymmetric surface properties should be cautiously taken into consideration while designing the surface-related applications for GO and rGO membranes.

  13. Virus removal vs. subsurface water velocity during slow sand filtration.

    Science.gov (United States)

    Dizer, Halim; Brackmann, Bernhard; Rahman, M Azizur; Szewzyk, Regine; Sprenger, Christoph; Holzbecher, Ekkehard; López-Pila, Juan M

    2015-06-01

    In an attempt to obtain a conservative estimate of virus removal during slow sand and river bank filtration, a somatic phage was isolated with slow decay and poor adsorption to coarse sand. We continuously fed a phage suspension to a 7-m infiltration path and measured the phage removal. In a second set of experiments, we fed the phage suspension to 1-m long columns run at different pore water velocities. Using the data obtained, a mathematical model was constructed describing removal vs. pore water velocity (PWV), assuming different statistical distributions of the adsorption coefficient λ. The bimodal distribution best fit the results for PWVs higher than 1 m/d. It predicted a removal of approximately 4 log10 after 50 days infiltration at 1 m/d. At PWVs below 1 m/d the model underestimated removal. Sand-bound phages dissociated slowly into the liquid phase, with a detachment constant kdet of 2.6 × 10⁻⁵. This low kdet suggests that river bank filtration plants should be intermittently operated when viral overload is suspected, e.g. during flooding events or at high water-marks in rivers, in order for viruses to become soil-associated during the periods of standstill. Resuming filtration will allow only a very slow virus release from the soil.

  14. Vulnerability of bank filtration systems to climate change.

    Science.gov (United States)

    Sprenger, C; Lorenzen, G; Hülshoff, I; Grützmacher, G; Ronghang, M; Pekdeger, A

    2011-01-15

    Bank filtration (BF) is a well established and proven natural water treatment technology, where surface water is infiltrated to an aquifer through river or lake banks. Improvement of water quality is achieved by a series of chemical, biological and physical processes during subsurface passage. This paper aims at identifying climate sensitive factors affecting bank filtration performance and assesses their relevance based on hypothetical 'drought' and 'flood' climate scenarios. The climate sensitive factors influencing water quantity and quality also have influence on substance removal parameters such as redox conditions and travel time. Droughts are found to promote anaerobic conditions during bank filtration passage, while flood events can drastically shorten travel time and cause breakthrough of pathogens, metals, suspended solids, DOC and organic micropollutants. The study revealed that only BF systems comprising an oxic to anoxic redox sequence ensure maximum removal efficiency. The storage capacity of the banks and availability of two source waters renders BF for drinking water supply less vulnerable than surface water or groundwater abstraction alone. Overall, BF is vulnerable to climate change although anthropogenic impacts are at least as important. Copyright © 2010 Elsevier B.V. All rights reserved.

  15. Filtration parameters influencing circulating tumor cell enrichment from whole blood.

    Directory of Open Access Journals (Sweden)

    Frank A W Coumans

    Full Text Available Filtration can achieve circulating tumor cell (CTC enrichment from blood. Key parameters such as flow-rate, applied pressure, and fixation, vary largely between assays and their influence is not well understood. Here, we used a filtration system, to monitor these parameters and determine their relationships. Whole blood, or its components, with and without spiked tumor cells were filtered through track-etched filters. We characterize cells passing through filter pores by their apparent viscosity; the viscosity of a fluid that would pass with the same flow. We measured a ratio of 5·10(4∶10(2∶1 for the apparent viscosities of 15 µm diameter MDA-231 cells, 10 µm white cells and 90 fl red cells passing through a 5 µm pore. Fixation increases the pressure needed to pass cells through 8 µm pores 25-fold and halves the recovery of spiked tumor cells. Filtration should be performed on unfixed samples at a pressure of ∼10 mbar for a 1 cm(2 track-etched filter with 5 µm pores. At this pressure MDA-231 cells move through the filter in 1 hour. If fixation is needed for sample preservation, a gentle fixative should be selected. The difference in apparent viscosity between CTC and blood cells is key in optimizing recovery of CTC.

  16. Active osmotic exchanger for advanced filtration at the nano scale

    Science.gov (United States)

    Marbach, Sophie; Bocquet, Lyderic

    2015-11-01

    One of the main functions of the kidney is to remove the waste products of an organism, mostly by excreting concentrated urea while reabsorbing water and other molecules. The human kidney is capable of recycling about 200 liters of water per day, at the relatively low cost of 0.5 kJ/L (standard dialysis requiring at least 150 kJ/L). Kidneys are constituted of millions of parallel filtration networks called nephrons. The nephrons of all mammalian kidneys present a specific loop geometry, the Loop of Henle, that is believed to play a key role in the urinary concentrating mechanism. One limb of the loop is permeable to water and the other contains sodium pumps that exchange with a common interstitium. In this work, we take inspiration from this osmotic exchanger design to propose new nanofiltration principles. We first establish simple analytical results to derive general operating principles, based on coupled water permeable pores and osmotic pumps. The best filtration geometry, in terms of power required for a given water recycling ratio, is comparable in many ways to the mammalian nephron. It is not only more efficient than traditional reverse osmosis systems, but can also work at much smaller pressures (of the order of the blood pressure, 0.13 bar, as compared to more than 30 bars for pressure-retarded osmosis systems). We anticipate that our proof of principle will be a starting point for the development of new filtration systems relying on the active osmotic exchanger principle.

  17. GPS Data Filtration Method for Drive Cycle Analysis Applications

    Energy Technology Data Exchange (ETDEWEB)

    Duran, A.; Earleywine, M.

    2013-02-01

    When employing GPS data acquisition systems to capture vehicle drive-cycle information, a number of errors often appear in the raw data samples, such as sudden signal loss, extraneous or outlying data points, speed drifting, and signal white noise, all of which limit the quality of field data for use in downstream applications. Unaddressed, these errors significantly impact the reliability of source data and limit the effectiveness of traditional drive-cycle analysis approaches and vehicle simulation software. Without reliable speed and time information, the validity of derived metrics for drive cycles, such as acceleration, power, and distance, become questionable. This study explores some of the common sources of error present in raw onboard GPS data and presents a detailed filtering process designed to correct for these issues. Test data from both light and medium/heavy duty applications are examined to illustrate the effectiveness of the proposed filtration process across the range of vehicle vocations. Graphical comparisons of raw and filtered cycles are presented, and statistical analyses are performed to determine the effects of the proposed filtration process on raw data. Finally, an evaluation of the overall benefits of data filtration on raw GPS data and present potential areas for continued research is presented.

  18. Ultra-filtration measurement using CT imaging technology

    Energy Technology Data Exchange (ETDEWEB)

    Lu Junfeng [Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No.2 Beiyitiao Street, Zhongguancun, Haidian District, Beijing, 100190 (China); Lu Wenqiang, E-mail: junfenglu@mail.ipc.ac.c [Graduate University of Chinese Academy of Sciences, No.19A Yuquan Road, Shijingshan District, Beijing, 100049 (China)

    2009-02-01

    As a functional unit in the hemodialysis process, dialyzer captured quite a few medical research interests since 1980s. In the design of dialyzer or in the ongoing hemodialysis process, to estimate the ultra-filtration amount of a dialyzer, the sideway loss of the running blood flow through hollow fibers or filtration channels should be measured. This further leads to the measurement of the blood flow inside the dialyzer. For this measurement, a non-invasive method is highly desired because of the high-dense bundled hollow fibers or packed channels inside the dialyzer. As non-invasive measurement tools, CT (Computed Tomography) technologies were widely used for tissue, bone, and cancerous clinical analyses etc .... Thus, in this paper, a CT system is adopted to predict the blood flow inside a hollow fiber dialyzer. In view of symmetric property of the hollow fiber dialyzer, the largest cutting plane that parallels to the cylindrical dialyzer was analyzed by the CT system dynamically. And then, a noninvasive image analysis method used to predict the ultra-filtration amount is proposed.

  19. Evaluation of hyperbaric filtration for fine coal dewatering. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Parekh, B.K. [Univ. of Kentucky, Lexington, KY (United States); Hogg, R. [Pennsylvania State Univ., University Park, PA (United States); Fonseca, A. [CONSOL Inc. (United States)

    1996-08-15

    The main objectives of the project were to investigate the fundamental aspects of particle-liquid interaction in fine coal dewatering, to conduct laboratory and pilot plant studies on the applicability of hyperbaric filter systems and to develop process conditions for dewatering of fine clean coal to less than 20% moisture. The program consisted of three phases, namely Phase 1 -- Model Development, Phase 2 -- Laboratory Studies, Phase 3 -- Pilot Plant Testing. The Pennsylvania State University led efforts in Phase 1, the University of Kentucky in Phase 2, and CONSOL Inc. in Phase 3 of the program. All three organizations were involved in all the three phases of the program. The Pennsylvania State University developed a theoretical model for hyperbaric filtration systems, whereas the University of Kentucky conducted experimental studies to investigate fundamental aspects of particle-liquid interaction and application of high pressure filter in fine coal dewatering. The optimum filtration conditions identified in Phase 1 and 2 were tested in two of the CONSOL Inc. coal preparation plants using an Andritz Ruthner portable hyperbaric filtration unit.

  20. Numerical Solutions of Mechanical Turbulent Filtration Equation Used in Mechatronics and Micro Mechanic

    Directory of Open Access Journals (Sweden)

    Hassan Fathabadi

    2013-08-01

    Full Text Available In this study, several novel numerical solutions are presented to solve the turbulent filtration equation and its special case called “Non-Newtonian mechanical filtration equation”. The turbulent filtration equation in porous media is a very important equation which has many applications to solve the problems appearing especially in mechatronics, micro mechanic and fluid mechanic. Many applied mechanical problems can be solved using this equation. For example, non-Newtonian mechanical filtration equation solves many filtration problems in fluid mechanic. The novel proposed discrete numerical solutions are simulated in MATLAB/simulink environment to validate the theoretically numerical solutions and proofing that the proposed numerical solutions are realizable.

  1. Effect of the filtration of PbI2 solution for zinc oxide nanowire based perovskite solar cells

    Science.gov (United States)

    Mijanur Rahman, Md.; Uekawa, Naofumi; Shiba, Fumiyuki; Okawa, Yusuke; Sakai, Masatoshi; Yamamoto, Kazunuki; Kudo, Kazuhiro; Konishi, Takehisa

    2016-01-01

    Zinc oxide (ZnO) nanowires (NWs) are grown on fluorine-doped tin oxide (FTO) glass substrates via a simple reactive evaporation method without the presence of any catalysts or additives. The ZnO NWs show high crystallinity and preferential elongation along the c-axis of the hexagonal wurtzite crystal structure. The highly crystalline NWs as electron transporting layer have been used to fabricate the CH3NH3PbI3 perovskite solar cells and their photovoltaic performance were investigated. In this report, we studied the effect of filtration of PbI2-solution on surface morphology of CH3NH3PbI3 layer. Spin-coating of the filtered PbI2-solution leads to a better crystallization and relatively homogenous coverage of the CH3NH3PbI3 film, resulting in an enhancement of the solar cell efficiency compared to the cell fabricated using non-filtrated PbI2-solution. By synthesizing the CH3NH3PbI3 film using filtrated PbI2-solution, we achieved the best power conversion efficiency of 4.8% with a current density of 7.6 mA cm-2, the open circuit voltage of 0.79 V and fill factor of 0.63.

  2. [Evaluation of preoperative anxiety in patients requiring glaucoma filtration surgery].

    Science.gov (United States)

    Lemaitre, S; Blumen-Ohana, E; Akesbi, J; Laplace, O; Nordmann, J-P

    2014-01-01

    Preoperative anxiety is often expressed by patients requiring filtration surgery for their glaucoma. So far, there has been no scale for screening this group of patients for preoperative anxiety. The Amsterdam Preoperative Anxiety and Information Scale (APAIS) is a self-evaluation questionnaire which has been used in specialties other than ophthalmology and which makes it possible to identify the adult patients with a high level of preoperative anxiety over an upcoming surgical procedure. The purpose of this study is to estimate the preoperative anxiety in glaucoma patients requiring filtration surgery. We performed a prospective study of 36 adult patients with chronic glaucoma not responding to medical treatment and who were about to undergo filtration surgery (trabeculectomy or deep sclerectomy). The APAIS questionnaire was given to the patients after discussing the indication for surgery. A global anxiety score (ranging from 4 to 20) above 10 defined patients with a high level of preoperative anxiety. We attempted to identify among these patients the factors related to filtration surgery which caused them anxiety (lack of control of intraocular pressure, risk of blindness, presence of the filtering bleb). In our sample of patients, we found that glaucoma was a source of anxiety. That was also true for the surgical procedure, though most patients believe that once the decision had been made, their psychological status was not modified by the upcoming procedure. The patient-clinician relationship is important in any chronic disease, all the more so in glaucoma, since this disease remains asymptomatic for a long time. When filtration surgery is necessary, the patients are going to express less preoperative anxiety if they trust their physician and if individualized information has been given to them The French version of the APAIS is a quick scale, easily completed, that can be recommended for evaluating anxiety and patients' need for information prior to filtering

  3. Preliminary evaluation of fungicidal and termiticidal activities of filtrates from biomass slurry fuel production.

    Science.gov (United States)

    Kartal, S N; Imamura, Y; Tsuchiya, F; Ohsato, K

    2004-10-01

    Biomass slurry fuel (BSF) production has recently been developed as a natural energy for the conversion of solid biomass into fuel. In addition to using fuel, filtrates from BSF production may also serve a chemical source with several organic compounds. There is an increasing interest in the research and application of biomass-based filtrates. In this study, fungicidal and termiticidal properties of filtrates from BSF production using sugi (Cryptomeria japonica) and acacia (Acacia mangium) wood were evaluated in laboratory decay and termite resistance tests. Wood blocks treated with the filtrates showed increased resistance against brown-rot fungus, Fomitopsis palustris. However the filtrates from sugi wood processed at 270 degrees C which contained less phenolic compounds than the other filtrates were effective against white-rot fungus, Trametes versicolor. Phenolic compounds of filtrates seemed to play a role in the decay resistance tests however the filtrates did not increase the durability of the wood blocks against subterranean termites Coptotermes formosanus. Despite high acetic and lactic acid content of the filtrates, vanillin content of the filtrates may have served as an additional food source and promoted termite attack. It can be concluded that filtrates with phenolic compounds from lignin degradation during BSF production can be considered for targeted inhibition of brown-rot.

  4. Preliminary evaluation of fungicidal and termiticidal activities of filtrates from biomass slurry fuel production

    Energy Technology Data Exchange (ETDEWEB)

    Kartal, S.N. [Istanbul University (Turkey). Forestry Faculty; Imamura, Y. [Kyoto University (Japan). Wood Research Institute; Tsuchiya, F.; Ohsato, K. [JGC Corporation, Yokohama (Japan)

    2004-10-01

    Biomass slurry fuel (BSF) production has recently been developed as a natural energy for the conversion of solid biomass into fuel. In addition to using fuel, filtrates from BSF production may also serve a chemical source with several organic compounds. There is an increasing interest in the research and application of biomass-based filtrates. In this study, fungicidal and termiticidal properties of filtrates from BSF production using sugi (Cryptomeria japonica) and acacia (Acacia mangium) wood were evaluated in laboratory decay and termite resistance tests. Wood blocks treated with the filtrates showed increased resistance against brown-rot fungus, Formitopsis palustris. However the filtrates from sugi wood processed at 270{sup o}C which contained less phenolic compounds than the other filtrates were effective against white-rot fungus, Trametes versicolor. Phenolic compounds of filtrates seemed to play a role in the decay resistance tests however the filtrates did not increase the durability of the wood blocks against subterranean termites Coptotermes formosanus. Despite high acetic and lactic acid content of the filtrates, vanillin content of the filtrates may have served as an additional food source and promoted termite attack. It can be concluded that filtrates with phenolic compounds from lignin degradation during BSF production can be considered for targeted inhibition of brown-rot. (author)

  5. Experimental Study on the Influence of DPF Micropore Structure and Particle Property on Its Filtration Process

    Directory of Open Access Journals (Sweden)

    Zhongwei Meng

    2016-01-01

    Full Text Available A single layer filtration system was developed to investigate the filtration and regeneration performance of diesel particle filter (DPF. The particle layer thickness was directly measured online to analyze the different filtration stages. The influence of particle property on particle layer stage performance was also investigated. The results indicate that the filtration velocity can greatly affect the deep bed filtration stage, and the deposited particle layer can be compressed even in very low filtration velocity and higher filtration velocity trends to form denser particle layer. Optimizing the pore structure can effectively shorten the deep bed filtration stage and reduce the pressure drop eventually. An empirical function was proposed to relate the pore structure and the initial increment rate of pressure drop, which presented that reducing the pore size distribution range (3σ can result in low DPF filtration pressure drop. The filtration stage could be further divided into four stages, and the value of particle layer thickness ranging within 15~20 μm has been found to be critical number for the shift from the transient stage to the cake filtration stage. Particle with large primary diameter and BET surface was beneficial to form loose particle layer.

  6. A Study on Enhancement of Filtration Process with Filter Aids Diatomaceous Earth and Wood Pulp Cellulose

    Institute of Scientific and Technical Information of China (English)

    都丽红; 陈旭; 李文苹; 朱企新

    2011-01-01

    In this paper, a study to enhance the filtration for solid/liquid materials difficult to be filtered, such as highly viscous, highly compactible or gel like materials, is presented. Filter aids diatomaceous earth and wood pulp cellulose are used to enhance the filtration by improving filter cake structure and properties in the filtration of a biological health product and a highly viscous chemical fiber polymer melt product. The property of solid/liquidsystems, filtration at different flow rates, specitic cake resistance, cake wetness, filtration rate, filtrate turbidity for filter aid selection and evaluation, and operation optimization are investigated. The results are successfully applied to industrial process, .and can be used as a reference for similar filtration applications.

  7. CROSSFLOW FILTRATION: EM-31, WP-2.3.6

    Energy Technology Data Exchange (ETDEWEB)

    Duignan, M.; Nash, C.; Poirier, M.

    2011-02-01

    In the interest of accelerating waste treatment processing, the DOE has funded studies to better understand filtration with the goal of improving filter fluxes in existing crossflow equipment. The Savannah River National Laboratory (SRNL) performed some of those studies, with a focus on start-up techniques, filter cake development, the application of filter aids (cake forming solid precoats), and body feeds (flux enhancing polymers). This paper discusses the progress of those filter studies. Crossflow filtration is a key process step in many operating and planned waste treatment facilities to separate undissolved solids from supernate solutions. This separation technology generally has the advantage of self-cleaning through the action of wall shear stress created by the flow of waste slurry through the filter tubes. However, the ability of filter wall self-cleaning depends on the slurry being filtered. Many of the alkaline radioactive wastes are extremely challenging to filtration, e.g., those containing compounds of aluminum and iron, which have particles whose size and morphology reduce permeability. Unfortunately, low filter flux can be a bottleneck in waste processing facilities such as the Savannah River Integrated Salt Disposition Process and the Hanford Waste Treatment Plant. Any improvement to the filtration rate would lead directly to increased throughput of the entire process. To date increased rates are generally realized by either increasing the crossflow filter feed flow rate, limited by pump capacity, or by increasing filter surface area, limited by space and increasing the required pump load. SRNL set up both dead-end and crossflow filter tests to better understand filter performance based on filter media structure, flow conditions, filter cleaning, and several different types of filter aids and body feeds. Using non-radioactive simulated wastes, both chemically and physically similar to the actual radioactive wastes, the authors performed several

  8. Low-density lipoprotein apheresis by membrane differential filtration (cascade filtration) via arteriovenous fistula performed in children with familial hypercholesterolemia.

    Science.gov (United States)

    Gülle, Saniye; Bak, Mustafa; Serdaroglu, Erkin; Can, Demet; Karabay, Ozalp

    2010-02-01

    Membrane differential filtration (cascade filtration) is an apheresis technique by which atherogenic lipoproteins can be eliminated from plasma on the basis of particle size. In this study, we aim to discuss the efficacy of low-density lipoprotein (LDL) apheresis performed by providing alternative vascular routes in two siblings with familial hypercholesterolemia who did not respond to medical treatment and diet. Of the two siblings, one was nine years old and the other one was three-and-a-half years old. Of the total of 78 apheresis processes performed, 24 were done via a permanent subclavian catheter, 36 were done via a subsequently provided arteriovenous fistula, and 18 were done via an arteriovenous graft. We observed a mean reduction in the plasma levels of total cholesterol (61.6%), LDL cholesterol (65.5%), and high-density lipoprotein cholesterol (38.6%). We noted that cascade filtration apheresis was effective in decreasing the LDL cholesterol in plasma, and no serious complications were noted. The success of the apheresis program depends on well-functioning blood access. An arteriovenous fistula may be the best route for the long-term treatment of familial hypercholesterolemia, which requires complication-free apheresis treatments.

  9. Subconjunctival sustained release 5-fluorouracil for glaucoma filtration surgery

    Institute of Scientific and Technical Information of China (English)

    Li-jun CUI; Nai-xue SUN; Xing-hua LI; Jie HUANG; Jian-gang YANG

    2008-01-01

    Aim:To determine the release characteristics of a 5-fluorouracil-loaded poly (lactic acid) disc (5-FU-PLA-DS) and the effect of sustained drug delivery on the success of glaucoma filtration surgery in rabbit eyes. Methods: A method of microspheres accumulated by excessive carriers was used in the preparation of the 5-FU-PLA-DS. The disc was characterized for drug loading, entrapment efficiency, in vitro release, and external morphology. It was then implanted sub-conjunctivally into rabbit eyes with trabeculectomy. Intraocular pressure, ocular inflammatory reaction, filtration bleb appearance, and persistence were evalu-ated up to postoperative d 90. A quantitative analysis of 5-fluorouracil (5-FU) was performed in the aqueous humor. Ultrasound biomicroscopy was used to assess the appearance of the filtering fistula. Results: The 5-FU-PLA-DS was produced with the drug-loading of 3.07±0.08 mg (mean±SD). 5-FU was released for 91 d with suppressive concentrations. The decrease in intraocular pressure from baseline was significantly more marked in the 5-FU-PLA-DS-implanted eyes during postoperative d 3-90, and the persistence of bleb and filtration fistula was longer than the control eyes (P<0.05). Corneal toxicity and hyperemia triggered by 5-FU was lower in the 5-FU-PLA-DS-implanted eyes than those exposed to 5-FU intraoperatively. The 5-FU concentration in the aqueous humor was insufficient for corneal endothelial damage. No evidence of toxic reaction was found in the conjunctival biopsy. Conclusion: 5-FU-PLA-DS displaying sustained intraocular release of 5-FU, reduced intraocular pres-sure, and prolonged bleb persistence, while significantly reducing 5-FU toxicity.

  10. Improved Filtration Technology for Pathogen Reduction in Rural Water Supplies

    Directory of Open Access Journals (Sweden)

    Valentine Tellen

    2010-06-01

    Full Text Available Intermittent bio-sand filtration (BSF is a low-cost process for improving water quality in rural households. This study addresses its two drawbacks: flow limitations requiring excessive waiting, and inadequate purification when high flows are imposed. Two modifications were examined: increasing the sand’s effective size, and adding zero-valent iron (ZVI into the media as a disinfectant. After 65 days, percent reductions in total coliform, fecal coliform, and fecal streptococci averaged 98.9% for traditional BSF and 99% for the improved BSF. Both modifications showed statistically significant improvements. Increased sand size and ZVI addition can counter the drawbacks of traditional BSF.

  11. Indexing Glomerular Filtration Rate to Body Surface Area

    DEFF Research Database (Denmark)

    Redal-Baigorri, Belén; Rasmussen, Knud; Heaf, James Goya

    2014-01-01

    BACKGROUND: Kidney function is mostly expressed in terms of glomerular filtration rate (GFR). A common feature is the expression as ml/min per 1.73 m(2) , which represents the adjustment of the individual kidney function to a standard body surface area (BSA) to allow comparison between individuals....... We investigated the impact of indexing GFR to BSA in cancer patients, as this BSA indexation might affect the reported individual kidney function. METHODS: Cross-sectional study of 895 adults who had their kidney function measured with (51) chrome ethylene diamine tetraacetic acid. Mean values of BSA...

  12. High gradient magnetic filtration and separation. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, D.

    1986-12-01

    This paper reviews the developing role of high gradient magnetic filtration (HGMF), and separation (HGMS). If discusses the relative position of this technique within the context of the general field of magnetic separation. Its future potential and the basic theory behind it is also reviewed. The two processes; HGMF and HGMS are well known and well established fuels used frequently in mineral processing, for example iron ore. Using different techniques and machines a whole host of uses is possible and the paper concludes by outlining the theory behind this whole area. 11 refs.

  13. Particulate filtration for sorbent-based H2 storage

    Science.gov (United States)

    van Hassel, Bart A.; Karra, Jagadeswara R.

    2016-01-01

    A method was developed for sizing the particulate filter that can be used inside a sorption-based onboard hydrogen storage system for light-duty vehicles. The method is based on a trade-off between the pressure drop across the particulate filter (during the fill of the H2 storage tank or during its discharge while driving) and the effect of this pressure drop on the usable amount of H2 gas from the H2 storage system. The permeability and filtration efficiency of the particulate filters (in the absence and presence of MOF-5 particulates) was quantified in this study, with an emphasis on meeting DOE's H2 purity requirements.

  14. Non-steady-state aerosol filtration in nanostructured fibrous media.

    Science.gov (United States)

    Przekop, Rafal; Gradoń, Leon

    2011-06-28

    The filtration of aerosol particles using composites of nano- and microsized fibrous structures is a promising method for the effective separation of nanoparticles from gases. A multi-scale physical system describing the flow pattern and particle deposition at a non-steady-state condition requires an advanced method of modelling. The combination of lattice Boltzmann and Brownian dynamics was used for analysis of the particle deposition pattern in a fibrous system. The dendritic structures of deposits for neutral and charged fibres and particles are present. The efficiency of deposition, deposit morphology, porosity and fractal dimension were calculated for a selected operational condition of the process.

  15. Possibilities for the filtration of inlet air for gas turbines

    Energy Technology Data Exchange (ETDEWEB)

    Sievert, J.; Reinhardt, H.

    1988-05-01

    Gas turbines require large quantities of air, which are sucked in from the atmosphere. Depending on the weather conditions and the location of the gas turbine the ambient air contains impurities which may lead to damage to or contamination of the blading of the compressors and turbines. In consequence this causes a reduction in output or efficiency. In principle there are several possibilities for the filtration of air sucked in for gas turbines of which the technically relevant ones at the present time are described.

  16. Filtration in ultrasonic field; Filtracao em campo ultrassonico

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Inaura Carolina C. da; Cortes, Marcela de Araujo H.; Marques, Jose Jailton [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil). Dept. de Engenharia Quimica

    2008-07-01

    The production of water associated to the petroleum is an issue of big relevance in exploration areas classified as 'exhausted fields'. The current alternative in practice is the re-injection of the wastewater into the geological formation with the dual purpose of increasing oil recovery and pollution minimization. However, produced water presents several components that make impossible its direct re-injection, requiring a previous treatment. In this context, this work presents the state-of-art of filtration in ultrasonic field, in order to contribute to the development of a new treatment technology applicable to the produced water problem. (author)

  17. Dedicated breast CT: effect of adaptive filtration on dose distribution

    CERN Document Server

    Shikhaliev, Polad M

    2016-01-01

    Purpose: The purpose of the work was experimental investigations of the breast dose distributions with adaptive filtration. Adaptive filtration reduces detector dynamic range and improves image quality. The adaptive filter with predetermined shape is placed at the x-ray beam such that the x-ray intensity at the detector surface is flat. However, adaptive filter alters the mean dose to the breast, as well as volume distribution of the dose. Methods: The dose was measured using a 14 cm diameter cylindrical acrylic breast phantom. An acrylic adaptive filter was fabricated to match the 14 cm diameter of the phantom. The dose was measured using ion chamber inserted into holes distributed along the radius of the phantom from the center to the edge. The radial distribution of dose was measured and fitted by an analytical function and the volume distribution and mean value of dose was calculated. The measurements were performed at 40, 60, 90, and 120 kVp tube voltages and 6.6 mGy air kerma. Results: The adaptive filt...

  18. Asymptotics of the filtration problem for suspension in porous media

    Directory of Open Access Journals (Sweden)

    Kuzmina Ludmila Ivanovna

    2015-01-01

    Full Text Available The mechanical-geometric model of the suspension filtering in the porous media is considered. Suspended solid particles of the same size move with suspension flow through the porous media - a solid body with pores - channels of constant cross section. It is assumed that the particles pass freely through the pores of large diameter and are stuck at the inlet of pores that are smaller than the particle size. It is considered that one particle can clog only one small pore and vice versa. The particles stuck in the pores remain motionless and form a deposit. The concentrations of suspended and retained particles satisfy a quasilinear hyperbolic system of partial differential equations of the first order, obtained as a result of macro-averaging of micro-stochastic diffusion equations. Initially the porous media contains no particles and both concentrations are equal to zero; the suspension supplied to the porous media inlet has a constant concentration of suspended particles. The flow of particles moves in the porous media with a constant speed, before the wave front the concentrations of suspended and retained particles are zero. Assuming that the filtration coefficient is small we construct an asymptotic solution of the filtration problem over the concentration front. The terms of the asymptotic expansions satisfy linear partial differential equations of the first order and are determined successively in an explicit form. It is shown that in the simplest case the asymptotics found matches the known asymptotic expansion of the solution near the concentration front.

  19. Carbon Nanotube Membranes: Synthesis, Properties, and Future Filtration Applications

    Directory of Open Access Journals (Sweden)

    Md. Harun-Or Rashid

    2017-05-01

    Full Text Available Over the course of the past decade, there has been growing interest in the development of different types of membranes composed of carbon nanotubes (CNTs, including buckypapers and composite materials, for an ever-widening range of filtration applications. This article provides an overview of how different types of CNT membranes are prepared and the results obtained from investigations into their suitability for different applications. The latter involve the removal of small particles from air samples, the filtration of aqueous solutions containing organic compounds and/or bacteria, and the separation of individual liquids present in mixtures. A growing number of reports have demonstrated that the incorporation of CNTs into composite membranes confers an improved resistance to fouling caused by biomacromolecules and bacteria. These results are discussed, along with evidence that demonstrates it is possible to further reduce fouling by taking advantage of the inherent conductivity of composite membranes containing CNTs, as well as by using different types of electrochemical stimuli.

  20. Chemical filtration of Cr (VI) with electrospun chitosan nanofiber membranes.

    Science.gov (United States)

    Li, Lei; Li, Yanxiang; Yang, Chuanfang

    2016-04-20

    Chitosan nanofibers (average diameter of 75nm) were electrospun on polyester (PET) scrim to form composite nanofiber membranes with controlled pore size. The membranes were then stacked as a membrane bed for chemical filtration of Cr (VI) of 1-5mg/L. The performance of the bed with respect to loading capacity at breakthrough, bed saturation and utilization efficiency were carefully investigated. The results showed that while these three parameters were dependent on pH, flow rate, flow distribution and packed pattern of the membrane, the latter two were less affected by feed Cr (VI) concentration and bed length. The maximum bed loading capacity for 1mg/L Cr (VI) filtration at breakthrough was found to be 16.5mg-chromium/g-chitosan, higher than the static adsorption capacity of 11.0mg-chromium/g-chitosan using nanofiber mats, indicating the membranes' better potential for dynamic adsorption. The minimum bed length required to avoid breakthrough was determined to be three layers of stacked membranes with nanofiber deposition density of 1g/m(2) by applying bed depth service time (BDST) model.

  1. Mechanistic evaluation of virus clearance by depth filtration.

    Science.gov (United States)

    Venkiteshwaran, Adith; Fogle, Jace; Patnaik, Purbasa; Kowle, Ron; Chen, Dayue

    2015-01-01

    Virus clearance by depth filtration has not been well-understood mechanistically due to lack of quantitative data on filter charge characteristics and absence of systematic studies. It is generally believed that both electrostatic interactions and sized based mechanical entrapment contribute to virus clearance by depth filtration. In order to establish whether the effectiveness of virus clearance correlates with the charge characteristics of a given depth filter, a counter-ion displacement technique was employed to determine the ionic capacity for several depth filters. Two depth filters (Millipore B1HC and X0HC) with significant differences in ionic capacities were selected and evaluated for their ability to eliminate viruses. The high ionic capacity X0HC filter showed complete porcine parvovirus (PPV) clearance (eliminating the spiked viruses to below the limit of detection) under low conductivity conditions (≤2.5 mS/cm), achieving a log10 reduction factor (LRF) of > 4.8. On the other hand, the low ionic capacity B1HC filter achieved only ∼2.1-3.0 LRF of PPV clearance under the same conditions. These results indicate that parvovirus clearance by these two depth filters are mainly achieved via electrostatic interactions between the filters and PPV. When much larger xenotropic murine leukemia virus (XMuLV) was used as the model virus, complete retrovirus clearance was obtained under all conditions evaluated for both depth filters, suggesting the involvement of mechanisms other than just electrostatic interactions in XMuLV clearance.

  2. Performance of rapid-grown KDP crystals with continuous filtration

    Institute of Scientific and Technical Information of China (English)

    Guohang Hu; Yueliang Wang; Junxiu Chang; Xiaoyi Xie; Yuanan Zhao; Hongji Qi; Jianda Shao

    2015-01-01

    Rapid growth processing of KDP crystals was improved by employing continuous filtration to eliminate bulk defects.The performances of the KDP crystals, including scattering defects, laser damage resistance and transmittance, were measured and analyzed. Compared with rapid-grown KDP without continuous filtration, the transmittance in the nearinfrared was increased by at least 2%, almost all of ‘micron size’ defects were eliminated and ‘sub-micron size’ defects were decreased by approximately 90%. Laser damage testing revealed that the laser-induced damage thresholds(LIDTs),as well as the consistency of the LIDTs from sample to sample, were improved greatly. Moreover, it identified that‘micron size’ defects were the precursors which initiated laser damage at relative lower laser fluence(4–6 J cm-2),and there was a lower correlation between smaller size scattering defects and laser damage initiation. The improved consistency in the LIDTs, attributed to elimination of ‘micron size’ defects, and LIDT enhancement originated from the decreased absorption of the KDP crystals.

  3. Controversies on glomerular filtration from Ludwig to the present.

    Science.gov (United States)

    Steinhausen, M; Endlich, K

    1996-01-01

    Since Ludwig's theory of filtration in the glomerulus is generally accepted, current research interest has focussed on the regulation of this process. The main determinants of glomerular filtration rate are glomerular capillary pressure and glomerular blood flow, which are adjusted via resistance changes in the pre- and postglomerular vasculature. Overall pre- and postglomerular resistances were first determined by micropuncture in superficial glomeruli. While the predominant source of postglomerular resistance is the efferent arteriole, several results indicate that preglomerular resistance might be rather uniformly distributed among all preglomerular vessels (interlobar, arcuate and interlobular arteries and afferent arterioles). Over the last decade, several techniques have been used to visualize renal vessels and to study the action of various vasoactive hormones thereon. Results obtained with the split hydronephrotic kidney model, which permits in vivo microscopy of all renal vessels, provide evidence for a differential regulation of the various preglomerular vessels by vasoactive hormones. In particular, mediators of inflammation almost selectively constrict interlobar and arcuate arteries. We conclude that, given the renal vascular architecture, differential regulation of preglomerular vessels can alter haemodynamic parameters specifically for different nephron populations.

  4. Controlled shear filtration: A novel technique for animal cell separation.

    Science.gov (United States)

    Vogel, J H; Kroner, K H

    1999-06-20

    A novel rotary microfiltration technique specifically suited for the separation of animal cells has been developed. The concept allows the independent adjustment of wall shear stress, transmembrane pressure, and residence time, allowing straightforward optimization of the microfiltration process. By using a smooth, conically shaped rotor, it is possible to establish a controlled shear field in which animal cells experience a significant hydrodynamic lift away from the membrane surface. It is shown in preliminary experiments that shear-induced cell-rupture speeds up membrane clogging and that cell debris poses the most significant problem in harvesting of BHK cell cultures by dynamic microfiltration. However, a threshold value of shear stability exists which depends on the frequency of passing the shear field, the residence time in the shear field, as well as on cell status. By operating close to this threshold value, cell viability can be maintained while concentration polarization is efficiently minimized. By applying this concept, it is possible to attain flux rates several times higher compared to conventional crossflow filtration. Controlled shear filtration (CSF) can be used for batch harvesting as well as for cell retention in high cell density systems. In batch harvesting of hIL-2 from rBHK cell culture, a constant flux rate of 290 L h-1 m-2 has been adjusted without indication of membrane clogging or fouling.

  5. Improved techniques for hyperbaric filtration of fine coal slurry

    Energy Technology Data Exchange (ETDEWEB)

    Yang, J.; Wang, X.H.; Parekh, B.K. [University of Kentucky, Lexington, KY (United States). Center for Applied Energy Research

    2010-07-01

    Dewatering of fine clean coal slurry is one of the most important unit operations of a coal-cleaning circuit. However, an efficient and economic dewatering method is still eluding the coal industry. In this study hyperbaric (high pressure) filtration studies were conducted on a froth flotation product obtained from a coal preparation plant processing Pittsburgh No. 8 seam coal. The fine coal slurry (42 weight percent minus 25 {mu}m) could be dewatered to a low moisture (24%) using 482kPa (70psi) pressure. This article describes two novel approaches for improving dewatering of the fine coal slurry using hyperbaric filtration, such as using a modified filter support and split-size dewatering. The modified filter support system and the split-sizing at 25 {mu}m (500mesh) provided 21.5% and 15.9% moisture filter cake, which was about 10% and 34% improvement in moisture reduction in the filter cake moisture, respectively. Combining both the approaches with the addition of a nonionic flocculant provided a filter cake with 10.5% moisture, which was about a 56% improvement in moisture reduction.

  6. The PBW Filtration, Demazure Modules and Toroidal Current Algebras

    Directory of Open Access Journals (Sweden)

    Evgeny Feigin

    2008-10-01

    Full Text Available Let L be the basic (level one vacuum representation of the affine Kac-Moody Lie algebra ^g. The m-th space F_m of the PBW filtration on L is a linear span of vectors of the form x_1dots x_lv_0, where l ≤ m, x_i in ^g and v_0 is a highest weight vector of L. In this paper we give two descriptions of the associated graded space L^{gr} with respect to the PBW filtration. The ''top-down'' description deals with a structure of L^{gr} as a representation of the abelianized algebra of generating operators. We prove that the ideal of relations is generated by the coefficients of the squared field e_θ(z2, which corresponds to the longest root θ. The ''bottom-up'' description deals with the structure of L^{gr} as a representation of the current algebra g otimes C[t]. We prove that each quotient F_m/F_{m-1} can be filtered by graded deformations of the tensor products of m copies of g.

  7. Triamcinolone acetonide concentration after filtration of the solvent agent.

    Science.gov (United States)

    Spandau, Ulrich H M; Derse, Mathias; Schmitz-Valckenberg, Paul; Papoulis, Christos; Sagstetter, Bernd-Udo; Stiefvater, Karlheinz; Jonas, Jost B

    2005-04-01

    To determine the amount of triamcinolone acetonide and the preservative benzyl alcohol after filtration. Laboratory investigation. The probes were prepared by two different hospital pharmacies. The probes of the first pharmacy included 20 probes with 25-mg triamcinolone acetonide, unfiltered (n = 5 probes) or filtered (n = 5), or with 4-mg triamcinolone acetonide, filtered (n = 5) or unfiltered (n = 5). The probes for the second pharmacy were filtered (n = 3) probes of 25-mg triamcinolone acetonide. For the probes of the first pharmacy, triamcinolone acetonide dosages were 2.4 +/- 0.8 mg, 3.1 +/- 0.6 mg, 12.8 +/- 0.7 mg, and 23.4 +/- 2.3 mg, respectively, for the filtered 4-mg probes, unfiltered 4-mg probes, filtered 25-mg probes, and unfiltered 25-mg probes, respectively. For the second pharmacy, mean triamcinolone acetonide dosage was 23.8 +/- 0.6 mg for the 25-mg filtered probes and contained benzyl alcohol in a mean concentration of 0.0013 +/- 0.0001 mg/0.1 ml. Depending on the method employed and the pharmacy, preparation of triamcinolone acetonide including filtration of the solvent agent leads to a marked inter-pharmacy variation and a relatively low intra-pharmacy variation in the reduction of triamcinolone acetonide dosage.

  8. Purification of hemoglobin by tangential flow filtration with diafiltration.

    Science.gov (United States)

    Elmer, Jacob; Harris, David R; Sun, Guoyong; Palmer, Andre F

    2009-01-01

    A recent study by Palmer, Sun, and Harris (Biotechnol. Prog., 25:189-199, 2009) demonstrated that tangential flow filtration (TFF) can be used to produce HPLC-grade bovine and human hemoglobin (Hb). In this current study, we assessed the quality of bovine Hb (bHb) purified by introducing a 10 L batch-mode diafiltration step to the previously mentioned TFF Hb purification process. The bHb was purified from bovine red blood cells (RBCs) by filtering clarified RBC lysate through 50 nm (stage I) and 500 kDa (stage II) hollow fiber (HF) membranes. The filtrate was then passed through a 100 kDa (stage III) HF membrane with or without an additional 10 L diafiltration step to potentially remove additional small molecular weight impurities. Protein assays, SDS-PAGE, and LC-MS of the purified bHb (stage III retentate) reveal that addition of a diafiltration step has no effect on bHb purity or yield; however, it does increase the methemoglobin level and oxygen affinity of purified bHb. Therefore, we conclude that no additional benefit is gained from diafiltration at stage III and a three stage TFF process is sufficient to produce HPLC-grade bHb.

  9. Internal filtration in dialyzers with different membrane permeabilities.

    Science.gov (United States)

    Sato, Yuichi; Kimura, Kenjiro; Chikaraishi, Tatsuya

    2010-07-01

    Over the last decade, hemodialysis with enhanced internal filtration (IF) has been investigated as an alternative to conventional dialysis. Several factors affect IF, including the geometry and permeability of hollow-fiber dialyzers. Although various studies have been performed, the association between IF and membrane permeability has not been fully examined because of the difficulty in measuring IF. Therefore, in this study, we set up an experimental circuit and attempted to directly measure IF as well as membrane permeability in five dialyzers. In the circuit, we placed two dialyzers of the same type in series, and a special sampling port between them, thereby making it possible to determine IF by measuring the extent to which blood was concentrated between the two dialyzers. We showed that a significant amount of IF occurred in this tandem-dialyzer circuit, ranging from 23.5 to 100 ml/min, which increased linearly with increasing membrane permeability. We also showed that membrane permeability was reduced in the first dialyzer to a greater extent than in the second one after four hours of circulation, suggesting that filtration caused substantial membrane fouling. In this study we practically demonstrated that membrane permeability is highly relevant to the phenomenon of IF.

  10. Intermittent filtration of bacteria and colloids in porous media

    Science.gov (United States)

    Auset, Maria; Keller, Arturo A.; Brissaud, François; Lazarova, Valentina

    2005-09-01

    Intermittent filtration through porous media used for water and wastewater treatment can achieve high pathogen and colloid removal efficiencies. To predict the removal of bacteria, the effects of cyclic infiltration and draining events (transient unsaturated flow) were investigated. Using physical micromodels, we visualized the intermittent transport of bacteria and other colloids in unsaturated porous media. Column experiments provided quantitative measurements of the phenomena observed at the pore scale. Tagged Escherichia coli and a conservative tracer (NaI) were introduced in an initial pulse into a 1.5 m sand column. Subsequent hydraulic flushes without tagged bacteria or tracer were repeated every 4 hours for the next 4 days, during which outflow concentrations were monitored. Breakthrough behavior between colloids and dissolved tracer differed significantly, reflecting the differences in transport processes. Advancement of the wetting front remobilized bacteria which were held in thin water films, attached to the air-water interface (AWI), or entrapped in stagnant pore water between gas bubbles. In contrast, the tracer was only remobilized by diffusion from immobile to mobile water. Remobilization led to successive concentration peaks of bacteria and tracer in the effluent but with significant temporal differences. Observations at the pore-scale indicated that the colloids were essentially irreversibly attached to the solid-water interface, which explained to some extent the high removal efficiency of microbes in the porous media. Straining, cluster filtration, cell lysis, protozoa grazing, and bacteriophage parasitism could also contribute to the removal efficiency of bacteria.

  11. Turbidity removal: Gravel and charcoal as roughing filtration media

    Directory of Open Access Journals (Sweden)

    Josiah A. Adeyemo

    2010-10-01

    Full Text Available Roughing filtration is an important pre-treatment process for wastewater, because it efficiently separates fine solid particles over prolonged periods, without the addition of chemicals. For this study, a pilot plant was designed at Delmas Coal Mine in the Mpumalanga province of South Africa. The design and sizing of the pilot plant was guided by Wegelin’s design criteria. Gravel was used as a control medium because it is one of the most commonly used roughing filter media and because it was used in developing the criteria. We compared the performance of gravel as a filter medium to that of another locally available material, charcoal, for the removal of turbidity in wastewater. The pilot plant was monitored continuously for 90 days from commissioning until the end of the project. The overall performance of the roughing filter in turbidity removal, using gravel or charcoal, was considered efficient for the pre-treatment of waste water. Charcoal performed slightly better than gravel as a filter medium for the removal of turbidity, possibly because charcoal has a slightly higher specific surface area and porosity than gravel, which could enhance sedimentation and other filtration processes, such as adsorption, respectively.

  12. Harder–Narasimhan filtration for rank 2 tensors and stable coverings

    Indian Academy of Sciences (India)

    ALFONSO ZAMORA

    2016-08-01

    We construct a Harder--Narasimhan filtration for rank 2 tensors, where there does not exist any such notion {/it a priori,} as coming from a GIT notion of maximal unstability. The filtration associated to the 1-parameter subgroup of Kempf giving the maximal way to destabilize, in the GIT sense, a point in the parameter space of the construction of the moduli space of rank 2 tensors over a smooth projective complex variety, does not depend on a certain integer used in the construction of the moduli space, for large values of the integer. Hence, this filtration is unique and we define the Harder--Narasimhan filtration for rank 2 tensors as this unique filtration coming from GIT. Symmetric rank 2 tensors over smooth projective complex curves define curve coverings lying on a ruled surface, hence we can translate the stability condition to define stable coverings and characterize the Harder--Narasimhan filtration in terms of intersection theory.

  13. Effects of different Helicobacter pylori culture filtrates on growth of gastric epithelial cells

    Institute of Scientific and Technical Information of China (English)

    Yan-Guo Yan; Gang Zhao; Jin-Ping Ma; Shi-Rong Cai; Wen-Hua Zhan

    2008-01-01

    AIM: To study the effects of different Helicobacter pylori (H py/orl) culture filtrates on growth of gastric epithelial cells.METHODS: Broth culture filtrates of H pylori were prepared. Gastric epithelial cells were treated with the filtrates, and cell growth was determined by growth curve and flow cytometry. DNA damage of gastric epithelial cells was measured by single-cell microgel electrophoresis.RESULTS: Gastric epithelial cells proliferated actively when treated by CagA-gene-positive broth culture filtrates, and colony formation reached 40%. The number of cells in S phase increased compared to controls. Comet assay showed 41.2% comet cells in GES-1 cells treated with CagA-positive filtrates (P<0.05).CONCLUSION: CagA-positive filtrates enhance the changes in morphology and growth characteristics of human gastric epithelial tumor cells. DNA damage maybe one of the mechanisms involved in the growth changes.

  14. Impact of 50% Synthesized Iso-Paraffins (SIP) on Middle Distillate Fuel Filtration and Coalescence

    Science.gov (United States)

    2014-10-30

    Impact of 50% Synthesized Iso-Paraffins (SIP) on Middle Distillate Fuel Filtration and Coalescence NF&LCFT REPORT 441/15-003 30 October 2014...October 2014 Page 1 Impact of 50% Synthesized Iso-Paraffins (SIP) on Middle Distillate Fuel Filtration and Coalescence 1.0 BACKGROUND In...Paraffins (SIP) on Middle 5a. CONTRACT NUMBER N/A Distillate Fuel F-76 Filtration and Coalescence 5b. GRANT NUMBER N/A 5c. PROGRAM

  15. The direct filtration in a conventional water treatment plant; La filtracion directa en una ETAP convencional

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Quiros, F. [Canal de Isabel II, Madrid (Spain)

    1995-06-01

    The article describes the difficulty of the decantation of low turbidity water. Direct filtration and in-line filtration can be available alternative treatment process to coagulation, flocculation, with the minimum required chemical dosage especially coagulants, less sludge production and lower operation cost. The adaptation of conventional treatment plant to direct filtration system with recuperation of filters backwash water by eliminating the decantation, is relatively simple. The result to apply this process shows an efficient filters performance for the same effluent quality. (Author)

  16. ACCUMULATION OF ALKALIS IN THE RECYCLING FILTRATE OF THE PHOSPHOGYPSUM PULPS

    OpenAIRE

    ANTANAS KAZILIUNAS; MARYTE BACAUSKIENE

    2011-01-01

    Sodium and potassium combinations existing in phosphogypsum are highly soluble and remain in the filtrate, their amount increasing with each recycle. It has been determined that the amount of alkalis in the recycling filtrate depends on an amount of alkalis in uncleaned phosphogypsum, a number of recycles in the filtrate, the technology of the phosphogypsum pulp preparation and an amount of soluble phosphates. New phosphate formations composed in an acid medium (pH = 4.5-5) are well crystaliz...

  17. Sterile Filtration of Highly Concentrated Protein Formulations: Impact of Protein Concentration, Formulation Composition, and Filter Material.

    Science.gov (United States)

    Allmendinger, Andrea; Mueller, Robert; Huwyler, Joerg; Mahler, Hanns-Christian; Fischer, Stefan

    2015-10-01

    Differences in filtration behavior of concentrated protein formulations were observed during aseptic drug product manufacturing of biologics dependent on formulation composition. The present study investigates filtration forces of monoclonal antibody formulations in a small-scale set-up using polyvinylidene difluoride (PVDF) or polyethersulfone (PES) filters. Different factors like formulation composition and protein concentration related to differences in viscosity, as well as different filtration rates were evaluated. The present study showed that filtration behavior was influenced by the presence or absence of a surfactant in the formulation, which defines the interaction between filter membrane and surface active formulation components. This can lead to a change in filter resistance (PES filter) independent on the buffer system used. Filtration behavior was additionally defined by rheological non-Newtonian flow behavior. The data showed that high shear rates resulting from small pore sizes and filtration pressure up to 1.0 bar led to shear-thinning behavior for highly concentrated protein formulations. Differences in non-Newtonian behavior were attributed to ionic strength related to differences in repulsive and attractive interactions. The present study showed that the interplay of formulation composition, filter material, and filtration rate can explain differences in filtration behavior/filtration flux observed for highly concentrated protein formulations thus guiding filter selection.

  18. PRE-FILTRATION IN BOULDER AND SLOW SAND FILTRATION WITH NON-WOVEN SYNTHETIC LAYERS AND GRANULATED VEGETAL COAL TO IMPROVE QUALITY IN WASTEWATER TREATED BY CONSTRUCTED WETLANDS

    OpenAIRE

    Paterniani, JES; da Silva, MJM; Ribeiro, TAP; Barbosa, M.

    2011-01-01

    The objective of this study was the comparison between two filtration systems, being one composed of a boulder pre-filter followed by a slow filter with sand as filtration media and a non-woven synthetic fabric in the upper part, and the other one composed of a boulder pre-filter followed by a slow filter with sand as filtration media and granular activated charcoal and a non-woven synthetic fabric in the upper part, for the purification of household effluents treated in cultivated beds, to b...

  19. Glomerular endothelial surface layer acts as a barrier against albumin filtration.

    Science.gov (United States)

    Dane, Martijn J C; van den Berg, Bernard M; Avramut, M Cristina; Faas, Frank G A; van der Vlag, Johan; Rops, Angelique L W M M; Ravelli, Raimond B G; Koster, Bram J; van Zonneveld, Anton Jan; Vink, Hans; Rabelink, Ton J

    2013-05-01

    Glomerular endothelium is highly fenestrated, and its contribution to glomerular barrier function is the subject of debate. In recent years, a polysaccharide-rich endothelial surface layer (ESL) has been postulated to act as a filtration barrier for large molecules, such as albumin. To test this hypothesis, we disturbed the ESL in C57Bl/6 mice using long-term hyaluronidase infusion for 4 weeks and monitored albumin passage using immunolabeling and correlative light-electron microscopy that allows for complete and integral assessment of glomerular albumin passage. ESL ultrastructure was visualized by transmission electron microscopy using cupromeronic blue and by localization of ESL binding lectins using confocal microscopy. We demonstrate that glomerular fenestrae are filled with dense negatively charged polysaccharide structures that are largely removed in the presence of circulating hyaluronidase, leaving the polysaccharide surfaces of other glomerular cells intact. Both retention of native ferritin [corrected] in the glomerular basement membrane and systemic blood pressure were unaltered. Enzyme treatment, however, induced albumin passage across the endothelium in 90% of glomeruli, whereas this could not be observed in controls. Yet, there was no net albuminuria due to binding and uptake of filtered albumin by the podocytes and parietal epithelium. ESL structure and function completely recovered within 4 weeks on cessation of hyaluronidase infusion. Thus, the polyanionic ESL component, hyaluronan, is a key component of the glomerular endothelial protein permeability barrier.

  20. An in situ filtration system for trace element determination in suspended particulate matter

    Energy Technology Data Exchange (ETDEWEB)

    Grotti, Marco; Soggia, Francesco; Dalla Riva, Simona; Magi, Emanuele; Frache, Roberto

    2003-11-28

    A system for in situ filtration of suspended particulate matter (SPM) has been developed specifically for trace element determination. Minimization of metal contamination sources was realized by careful choice of materials and designing a ''closed-open-closed'' electronic procedure for the soaking of the system. In order to prevent undesired pressure increase due to the filter clogging and to avoid modification of metal distribution in the different phases of SPM, a relief valve was used to keep the pumping pressure constant. The possibility to perform a sub-sampling of SPM was also taken into account to expand the analytical capabilities. Finally, the sampler was equipped with a multiparametric probe in order to carry out real-time measurements of physical parameters (temperature, salinity, fluorescence, turbidimetry) and operating conditions (flow rates, filtered volumes, energy consumption). The system has been tested and applied successfully in Antarctic coastal waters (Terra Nova Bay, Ross Sea) in the framework of the Italian Research Programme in Antarctica (PNRA). The analytical possibilities allowed by the large amount of SPM which can be collected by FIS500 (50-100 mg) include total metal concentration, solid speciation and morphological investigation by scanning electron microscopy.

  1. Antimicrobial filtration with electrospun poly(vinyl alcohol) nanofibers containing benzyl triethylammonium chloride: Immersion, leaching, toxicity, and filtration tests.

    Science.gov (United States)

    Park, Jeong-Ann; Kim, Song-Bae

    2017-01-01

    Antimicrobial electrospun poly(vinyl alcohol) (PVA) nanofibers were synthesized by impregnating benzyl triethylammonium chloride (BTEAC) as an antimicrobial agent into PVA nanofibers. The BTEAC-PVA nanofibers were heat-methanol treated during the preparation for various tests. The BTEAC-PVA nanofibers became more hydrophilic than the PVA nanofibers due to incorporation of BTEAC. Through heat-methanol treatment, thermal property, crystallinity, and water stability of BTEAC-PVA nanofibers were improved considerably. The immersion test shows that heat-methanol treatment has an advantage over heat treatment to maintain BTEAC content in BTEAC-PVA nanofibers. The acute toxicity test demonstrates that the 24-h EC50 and 48-h EC50 values (EC50 = median effective concentration) of BTEAC to Daphnia magna were 113 and 90 mg/L, respectively. The leaching test indicates that the BTEAC concentration leached from BTEAC-PVA nanofibers was far below the concentration affecting the immobilization of D. magna. For antimicrobial filtration tests, the BTEAC-PVA nanofibers were deposited onto glass fiber filter. The antimicrobial filtration test was conducted against bacteria (Escherichia coli, Staphylococcus aureus) and bacteriophages (MS2, PhiX174), demonstrating that the BTEAC-PVA nanofibers could enhance the removal of E. coli and S. aureus considerably but not the removal of MS2 and PhiX174 under dynamic flow conditions.

  2. Reverse osmosis followed by activated carbon filtration for efficient removal of organic micropollutants from river bank filtrate.

    Science.gov (United States)

    Kegel, F Schoonenberg; Rietman, B M; Verliefde, A R D

    2010-01-01

    Drinking water utilities in Europe are faced with a growing presence of organic micropollutants in their water sources. The aim of this research was to assess the robustness of a drinking water treatment plant equipped with reverse osmosis and subsequent activated carbon filtration for the removal of these pollutants. The total removal efficiency of 47 organic micropollutants was investigated. Results indicated that removal of most organic micropollutants was high for all membranes tested. Some selected micropollutants were less efficiently removed (e.g. the small and polar NDMA and glyphosate, and the more hydrophobic ethylbenzene and napthalene). Very high removal efficiencies for almost all organic micropollutants by the subsequent activated carbon, fed with the permeate stream of the RO element were observed except for the very small and polar NDMA and 1,4-dioxane. RO and subsequent activated carbon filtration are complementary and their combined application results in the removal of a large part of these emerging organic micropollutants. Based on these experiments it can be concluded that the robustness of a proposed treatment scheme for the drinking water treatment plant Engelse Werk is sufficiently guaranteed.

  3. Electrospun ceramic fibermats for filtration applications in lunar missions for in-habitat applications

    Science.gov (United States)

    Biswas, Apratim

    associated with general handling and fixture used for holding the filtration media. Electrospinning was selected as the fabrication method due to superior performance towards fiber diameter uniformity and the ability to decrease fiber diameters to the nm level. Filtration tests have been carried out on such fibermats concerning a number of key variables such as fiber diameter, particle size, pressure drop and more. Multifunctionality, as filter material and as photocatalyst, allows the filters to be regenerable. Furthermore, organic vapors (odors) and plant super hormones (ethylene gas) can be oxidized. This is key for a sustainable human base where food needs to be grown and the level of odors in habitat has to be minimized. Ceramic materials based on TiO2 and titania composites where selected. To enhance the catalytic properties doping with a pentavalent ion, viz. niobium, with varying concentrations was done. Materials were electrospun and characterized. An increase of niobium yields stabilization of the anatase phase at 600°C as evident from XRD patterns. Higher treatment temperatures allow a transformation to rutile. This is important since the semiconductor junction of anatase to rutile decreases electron-hole recombination rate, which enhances the photocatalytic activity. Furthermore, doping anatase with niobium increases the porosity and with it the catalytically active area. In fact the specific surface area of titania fibers increases by almost 6 times when doped with only 2.5 at% niobium. However, in this work reduced photocatalytic activity was observed. It is hypothesized that phase separation of the niobium rather than doping in a solid solution occurred which will change the properties of the semiconductor junction in an unfavorable way. The other possible explanation is the decrease in the anatase -- rutile semiconductor junction in niobium doped titania.

  4. Application of transmission electron tomography for modeling the renal corpuscle.

    Science.gov (United States)

    Cheng, Delfine; Shen, Sylvie; Chen, Xin-Ming; Pollock, Carol; Braet, Filip

    2013-11-01

    Structural alteration to the microanatomical organization of the glomerular filtration barrier results in proteinuria. Conventional transmission electron microscopy is an important diagnostic tool to assess the degree of ultrastructural damage of the corpusclar filtration unit. However, this approach lacks the ability to collect accurate stereological insights in a relative large tissue volume. Transmission electron tomography offers the ability to gather three-dimensional information with relative ease. Therefore, this contribution aims to highlight what electron tomography can bring to the pathologist in this challenging area of diagnostic practice. Kidney tissue was prepared for routine ultrastructural transmission electron microscopy investigation. Three-dimensional data stacks were automatically acquired by tilting semi-thin sections of 270 nm in an angular range of typically -60° to +60° with 1° increment. Subsequently, models of the filtration unit were produced by computer-assisted tracking of structures of interest. This short report illustrates the capability that transmission electron tomography can offer in the fine structure-function assessment of the porous fenestrated glomerular capillary endothelium, the underlying basement membrane and the podocyte filtration slits. Furthermore, this approach allows the generation of morphometric data about size, shape and volume alterations of the kidney's filtration barrier at the nanoscale.

  5. Is the use of particle air filtration justified? Costs and benefits of filtration with regard to health effects, building cleaning and occupant productivity

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Clausen, Geo; Weschler, Charles J.

    2008-01-01

    Estimates of costs and the corresponding benefits of particle filtration have been derived for a standard office building. Reduction in occupants’ exposure to particles during their workday is anticipated to reduce their morbidity and mortality. Filtration may also reduce the costs associated......, the sensitivity of the results to these parameters was evaluated as part of this study. The study also acknowledges that the benefits-to-costs ratio depends on the perspective of the stakeholder: the employer renting the building is impacted by occupant performance and building energy costs; the building owner...... is impacted by maintenance of the building and its HVAC system; society is impacted by the employees’ health and welfare. Regardless of perspective, particle filtration is anticipated to lead to annual savings significantly exceeding the running costs for filtration. However, economic losses resulting from...

  6. Water Purification by Shock Electrodialysis: Deionization, Filtration, Separation, and Disinfection

    CERN Document Server

    Deng, Daosheng; Braff, William A; Schlumpberger, Sven; Suss, Matthew E; Bazant, Martin Z

    2014-01-01

    The development of energy and infrastructure efficient water purification systems are among the most critical engineering challenges facing our society. Water purification is often a multi-step process involving filtration, desalination, and disinfection of a feedstream. Shock electrodialysis (shock ED) is a newly developed technique for water desalination, leveraging the formation of ion concentration polarization (ICP) zones and deionization shock waves in microscale pores near to an ion selective element. While shock ED has been demonstrated as an effective water desalination tool, we here present evidence of other simultaneous functionalities. We show that, unlike electrodialysis, shock ED can thoroughly filter micron-scale particles and aggregates of nanoparticles present in the feedwater. We also demonstrate that shock ED can enable disinfection of feedwaters, as approximately $99\\%$ of viable bacteria (here \\textit{E. coli}) in the inflow were killed or removed by our prototype. Shock ED also separates...

  7. Hot-gas filtration for pressurized fluidized-bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    Chang, R.; Kuby, W.

    1984-03-01

    This topical report discusses the status of the work, conducted under EPRI contract 1336-4, on the evaluation and development of ceramic filter hot gas cleanup technology for pressurized fluidized bed combustion. This topical report represents the status of the work through September 1983. The goal of the effort is to achieve 6000 h of operation on a 13-filter durability test rig. The work includes two parallel tasks. The first is construction of a durability test facility, operation of the facility with an initial candidate filter media installed, and assessment of results. The second task includes a literature survey to identify state-of-the-art ceramic fibers suitable for high-temperature gas filtration applications and filter testing in a single-filter test facility to assess the performance of promising new filter media. The best candidate will be chosen for further evaluation in the durability facility.

  8. Development of injection moulded, ultrasonically welded immiscible phase filtration devices

    DEFF Research Database (Denmark)

    Kistrup, Kasper

    for ultrasonic welding, suitable for microfluidic systems. A methodology has been established where energy directors can be quickly added to existing mould inserts, using laser micromachining. The produced device was performance tested by isolating methicillin-resistant Staphylococcus aureus from bovine whole....... The device appliesmagnetic bead-based solid-phase extraction for nucleic acid extraction from biological samples, using the immiscible phase filtration (IPF) approach. Device development has employed injection moulding for part fabrication and ultrasonic welding for bonding. Rapid prototyping...... was accomplished by micromilling and laser micromachining of mould inserts, allowing for design-to-production of chips within a day. The rapid overall fabrication cycle of a few minutes per chip allowed for conducting research in a single-use disposable fashion. Chip development has centred on manufacturing...

  9. Home water treatment by direct filtration with natural coagulant.

    Science.gov (United States)

    Babu, Raveendra; Chaudhuri, Malay

    2005-03-01

    Seeds of the plant species Strychnos potatorum and Moringa oleifera contain natural polyelectrolytes which can be used as coagulants to clarify turbid waters. In laboratory tests, direct filtration of a turbid surface water (turbidity 15-25 NTU, heterotrophic bacteria 280-500 cfu ml(-1), and fecal coliforms 280-500 MPN 100 ml(-1)), with seeds of S. potatorum or M. oleifera as coagulant, produced a substantial improvement in its aesthetic and microbiological quality (turbidity 0.3-1.5 NTU, heterotrophic bacteria 5-20 cfu ml(-1) and fecal coliforms 5-10 MPN 100 ml(-1)). The method appears suitable for home water treatment in rural areas of developing countries. These natural coagulants produce a 'low risk' water; however, additional disinfection or boiling should be practised during localised outbreaks/epidemics of enteric infections.

  10. Ceramic Ultra Filtration Membrane Bioreactor for Domestic Wastewater Treatment

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A long term domestic wastewater treatment experiment was conducted using a recirculating ceramic ultra filtration membrane bioreactor (CUFMB) system. Three experiments were run with a hydraulic retention time of 5h, sludge retention times of 5d, 15d, and 30d and a membrane surface flow rate of 4m/s. The experiment studied the membrane fouling mechanism and cleaning techniques. The results show that a CUFMB system can provide continuous good quality effluent which is completely acceptable for reuse. The system is also not affected by fluctuations of the inlet flow. The CUFMB sludge loading rate is similar to that of conventional biological treatment units. However, the volumetric loading rate of the CUFMB is 24 times that of conventional biological treatment units. Membrane fouling occurs due to channel clogging, which could be easily removed, and surface fouling, which can be effectively removed using the method described in this work which includes water rinsing, base cleaning, and acid washing.

  11. Simulation of C-CP Fiber-Based Air Filtration

    Directory of Open Access Journals (Sweden)

    Christopher L. Cox, Ph.D.

    2008-06-01

    Full Text Available The overall goal of this project is to develop High Efficiency Particulate Air (HEPA filter media, using conventional fiber spinning techniques, with lower pressure drop than current media through the use of shaped fibers. Capillary-channeled polymer (C-CP fibers are gaining interest for use in a range of separations applications. This paper focuses on modeling air filtration where the filter consists of C-CP fibers. A variety of numerical tools are being used in this effort, including a finite element flow solver and Brownian dynamics simulation. Aspects of these techniques in relation to the problem at hand will be described, and simulation results including comparisons to round-fiber filters will be presented. The primary result presented here is the significant difference in predicted pressure drop between a prototype C-CP filter and a round-fiber filter with equal total cross-sectional area.

  12. The Use of Coupled Plasma Filtration Adsorption in Traumatic Rhabdomyolysis

    Directory of Open Access Journals (Sweden)

    Mario Pezzi

    2017-01-01

    Full Text Available Severe musculoskeletal injuries induce the release of sarcoplasmic elements such as muscle enzymes, potassium, and myoglobin in the systemic circulation. The circulating myoglobin damages the glomerulus and renal tubules. Conventional haemodialysis is not able to remove myoglobin, due to its high molecular weight (17,8 kilodaltons [kDa]. We treated four traumatic rhabdomyolysis patients with Coupled Plasma Filtration Adsorption (CPFA in order to remove myoglobin followed by 14 hours of Continuous Veno-Venous Hemofiltration (CVVH. During the treatment, all patients showed clinical improvement with a decrease in muscular (creatine kinase [CK] and myoglobin and renal (creatinine and potassium damage indices. One patient, in spite of full renal recovery, died of cerebral haemorrhage on the 26th day of hospital stay.

  13. Flocculation, hydrophobic agglomeration and filtration of ultrafine coal

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Z. [University of British Columbia, Vancouver, BC (Canada). Department of Mineral and Mineral Process Engineering

    1999-07-01

    Selective flocculation tests were run on three types of coal and three additives in tests on a new hydrophobic agglomeration process using hydrophobic latices. The coals differed widely in surface wettability. The additives were hydrophobic latexes, a semi-hydrophobic flocculant, and a typical hydrophilic polyelectrolyte. The results show that coal wettability is very important in selective flocculation. UBC-1 hydrophobic latex flocculated hydrophobic coal particles only, while the polyelectrolyte flocculated all the coal samples and minerals that were tested. Tests of oil agglomeration using kerosene emulsified with surfactants of various ionic properties show that even oxidized coals can be agglomerated, if cationic surfactants are used to emulsify the oil. The hydrophobic latex and emulsified oils also significantly increase filtration rate and reduce filter cake moisture content.

  14. Liquid filtration properties in gravel foundation of railroad tracks

    Science.gov (United States)

    Strelkov, A.; Teplykh, S.; Bukhman, N.

    2016-08-01

    Railway bed gravel foundation has a constant permanent impact on urban ecology and ground surface. It is only natural that larger objects, such as railway stations, make broader impact. Surface run-off waters polluted by harmful substances existing in railroad track body (ballast section) flow along railroad tracks and within macadam, go down into subterranean ground flow and then enter neighbouring rivers and water basins. This paper presents analytic calculations and characteristics of surface run-off liquid filtration which flows through gravel multiple layers (railroad track ballast section). The authors analyse liquids with various density and viscosity flowing in multi-layer porous medium. The paper also describes liquid stationary and non-stationary weepage into gravel foundation of railroad tracks.

  15. Glomerular filtration rate in cows estimated by a prediction formula.

    Science.gov (United States)

    Murayama, Isao; Miyano, Anna; Sato, Tsubasa; Iwama, Ryosuke; Satoh, Hiroshi; Ichijyo, Toshihiro; Sato, Shigeru; Furuhama, Kazuhisa

    2014-12-01

    To testify the relevance of Jacobsson's equation for estimating bovine glomerular filtration rate (GFR), we prepared an integrated formula based on its equation using clinically healthy dairy (n=99) and beef (n=63) cows, and cows with reduced renal function (n=15). The isotonic, nonionic, contrast medium iodixanol was utilized as a test tracer. The GFR values estimated from the integrated formula were well consistent with those from the standard multisample method in each cow strain, and the Holstein equation prepared by a single blood sample in Holstein dairy cows. The basal reference GFR value in healthy dairy cows was significantly higher than that in healthy beef cows, presumably due to a breed difference or physiological state difference. It is concluded that the validity for the application of Jacobsson's equation to estimate bovine GFR is proven and it can be used in bovine practices.

  16. Organic-inorganic membranes for filtration of corn distillery

    Directory of Open Access Journals (Sweden)

    Myronchuk Valeriy G.

    2016-01-01

    Full Text Available Organic-inorganic membranes were obtained by modification of polymer microfiltration membrane with inorganic ion-exchangers, which form secondary porosity inside macroporous substrate (zirconium hydrophosphate or simultaneously in the macroporous substrate and active layer, depending of the particle size (from ≈50 nm up to several microns. Precipitation of the inorganic constituent is considered from the point of view of Ostwald-Freundlich equation. Such processes as pressing test in deionized water and filtration of corn distillery at 1-6 bar were investigated. Theoretical model allowing to establish fouling mechanism, was applied. It was found that the particles both in the substrate and active layer prevent fouling of the membrane with organics and provide rejection of colloidal particles.

  17. Allelopathic Effects of Cyanobacterial Filtrates on Baltic Diatom

    Science.gov (United States)

    Śliwińska, Sylwia; Latała, Adam

    2012-01-01

    Allelopathy may be one of the factors affecting the formation of massive and harmful algal blooms in aquatic environments. Recent studies indicate that blooms of cyanobacteria in the Baltic Sea has grown significantly in last decades, so it is important to determine the allelopathic interactions between the dominant species of cyanobacteria and microalgae. In this work we investigated the influence of allelopathic compounds on the growth of Skeletonema marinoi by addition of cell-free filtrate of the Baltic cyanobacterium Nodularia spumigena cultures grown under different temperature (15-25°C). Additionally the effects of filtrates of both an exponential and a stationary growing culture of N. spumigena were tested on diatom. These studies indicate that high temperature affected the donor species by increasing its production of allelochemicals. The highest drop of growth of analyzed diatom were observed after the addition of cell-free filtrate obtained from N. spumigena grown at 25°C and constituted 70% of their control. N. spumigena was only allelopathic in exponential growth phase, whereas the cyanobacteria filtrate from stationary phase have any effect on S. marinoi. These findings suggest that N. spumigena may reveal allelopathic activity and that the production of allelopathic substances is influenced by the temperature and growth phase of cyanobacteria. Allelopatia może być kluczowym czynnikiem wpływającym na tworzenie się masowych zakwitów sinic w wielu wodnych ekosystemach. Badania pokazują, że zakwity sinic w Morzu Bałtyckim w ostatnich dekadach znacznie się nasiliły, dlatego tak ważne jest określenie stopnia oddziaływania allelopatycznego dominujących w tym akwenie gatunków fitoplanktonu. W przeprowadzonych badaniach określono wpływ związków allelopatycznych produkowanych przez bałtycką sinicę Nodularia spumigena hodowaną w różnych temperaturach (15-25°C) na wzrost okrzemki Skeletonema marinoi. Dodatkowo w niniejszej pracy por

  18. MULTILAYER POROUS COMPOSITE FROM WASTE GLASS FOR WATER FILTRATION

    Directory of Open Access Journals (Sweden)

    M. P. Aji

    2015-07-01

    Full Text Available Multilayer porous composite have been produced through the heating process at temperature T=700oC for 2.5 h. Single layered porous composite was made with a varied mass percentage of from PEG polymer  1% to 10%. Double-layered porous composite were made by the arrangement of porosity (4:3%, (4:2% and (3:2%, while the three-layers porous composite have an arrangement (4:3:2%. Performance of multilayer porous composite for water filtration with pollutants of methylene blue 100 ppm was estimated from the absorbance spectrum. Rejection of methylene blue pollutants from single layered porous composite increases when the fraction of PEG polymer tend to be smaller in the matrix. Meanwhile, the double layered porous composite has a degradation of methylene blue pollutants are better than one layer. Triple layered porous composite have good performance for the water filtration where all the pollutants of methylene blue be able to be filtered.   Komposit pori berlapis telah dihasilkan dengan proses pemanasan pada temperatur T=700oC selama 2.5 jam. Komposit pori satu lapis dibuat dengan variasi persen massa polimer PEG 1% hingga 10%. Komposit pori dua lapis dibuat dengan susunan porositas (4:3%, (4:2% dan (3:2%, sedangkan komposit pori tiga lapis memiliki susunan porositas (4:3:2%. Kinerja komposit pori berlapis untuk filter air dengan polutan methylene blue 100 ppm diestimasi dari spektrum absorbansi. Rejeksi polutan methylene blue dari komposit pori satu lapis meningkat saat fraksi polimer PEG cenderung lebih kecil dalam matrik komposit. Sedangkan, komposit pori dua lapis memiliki kemampuan untuk degradasi polutan methylene blue yang lebih baik dari satu lapis. Komposit pori tiga lapis memiliki kinerja yang baik untuk filter air dimana seluruh polutan methylene blue mampu disaring. 

  19. Filtration-guided assembly for patterning one-dimensional nanostructures

    Science.gov (United States)

    Zhang, Yaozhong; Wang, Chuan; Yeom, Junghoon

    2017-04-01

    Tremendous progress has been made in synthesizing various types of one-dimensional (1D) nanostructures (NSs), such as nanotubes and nanowires, but some technical challenges still remain in the deterministic assembly of the solution-processed 1D NSs for device integration. In this work we investigate a scalable yet inexpensive nanomaterial assembly method, namely filtration-guided assembly (FGA), to place nanomaterials into desired locations as either an individual entity or ensembles, and form functional devices. FGA not only addresses the assembly challenges but also encompasses the notion of green nanomanufacturing, maximally utilizing nanomaterials and eliminating a waste stream of nanomaterials into the environment. FGA utilizes selective filtration of 1D NSs through the open windows on the nanoporous filter membrane whose surface is patterned by a polymer mask for guiding the 1D NS deposition. The modified soft-lithographic technique called blanket transfer (BT) is employed to create the various photoresist patterns of sub-10-micron resolution on the nanoporous filter membrane like mixed cellulose acetate. We use single-walled carbon nanotubes (SWCNTs) as a model 1D NS and demonstrate the fabrication of an array pattern of homogeneous 1D NS network films over an area of 20 cm2 within 10 min. The FGA-patterned SWCNT network films are transferred onto the substrate using the adhesive-based transfer technique, and show the highly uniform film thickness and resistance measurements across the entire substrate. Finally, the electrical performance of the back-gated transistors made from the FGA and transfer method of 95% pure SWCNTs is demonstrated.

  20. Biotrickling filtration of isopropanol under intermittent loading conditions.

    Science.gov (United States)

    San-Valero, Pau; Penya-Roja, Josep M; Sempere, Feliu; Gabaldón, Carmen

    2013-07-01

    This paper investigates the removal of isopropanol by gas-phase biotrickling filtration. Two plastic packing materials, one structured and one random, have been evaluated in terms of oxygen mass transfer and isopropanol removal efficiency. Oxygen mass transfer experiments were performed at gas velocities of 104 and 312 m h⁻¹ and liquid velocities between 3 and 33 m h⁻¹. Both materials showed similar mass transfer coefficients up to liquid velocities of 15 m h⁻¹. At greater liquid velocities, the structured packing exhibited greater oxygen mass transfer coefficients. Biotrickling filtration experiments were carried out at inlet loads (IL) from 20 to 65 g C m⁻³ h⁻¹ and empty bed residence times (EBRT) from 14 to 160 s. To simulate typical industrial emissions, intermittent isopropanol loading (16 h/day, 5 day/week) and intermittent spraying frequency (15 min/1.5 h) were applied. Maximum elimination capacity of 51 g C m⁻³ h⁻¹ has been obtained for the random packing (IL of 65 g C m⁻³ h⁻¹, EBRT of 50 s). The decrease in irrigation frequency to 15 min every 3 h caused a decrease in the outlet emissions from 86 to 59 mg C Nm⁻³ (inlet of 500 mg C Nm⁻³). The expansion of spraying to night and weekend periods promoted the degradation of the isopropanol accumulated in the water tank during the day, reaching effluent concentrations as low as 44 mg C Nm⁻³. After a 7-week starvation period, the performance was recovered in less than 10 days, proving the robustness of the process.

  1. Modeling of hyperbaric filtration and dewatering of coal

    Science.gov (United States)

    Ranjan, Sushil

    Generalized models have been developed for continuous hyperbaric filtration to evaluate cake formation, filter capacity/filter area, cake dewatering, air consumption and residual cake saturation/residual cake moisture. Emphasis has been placed on cake structure as being a major controlling factor in fine coal dewatering by filtration. The effects of cake structure, as defined by the distributions of pore size and shape, have been reviewed. A simple model relating cake structure to feed particle characteristics is presented and applied to a practical case of fine coal dewatering. A binary packing model has been proposed to explain the existence of compressibility in non-compressible cakes. This model proposes an inner open-structure in the main cake, with the inner layer being compressible. The variation in the inner cake porosity with applied pressure has been used to explain the change in specific cake resistance and filter capacity (solids cake throughput). Process simulations have been conducted for a single stage and a two stage process, wherein the original feed has been split into a coarse fraction and a fine fraction (and then each fraction processed separately). The process simulations for a two stage process show a lot of promise as this leads to a lowering of the required filter area and the residual cake moisture. The required filter area increases, while the residual cake moisture decreases as the cut size for the two stage process is increased. However, the advantages of a two stage process are adversely affected by an inefficient separation process, which leads to an increased filter area and a higher residual cake moisture and the two stage process approaches a single stage process.

  2. Enhanced filtration program at LLL. A progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Taylor, R.D.; Miller, H.H.; Bierman, A.H.; Hebard, H.D.; daRoza, R.A.; Lum, B.Y.

    1978-07-28

    As part of Lawrence Livermore Laboratory's Enhanced Filtration Program, we are investigating the use of an externally applied electric field to improve the performance of fibrous filters. Our objective in this program is to develop filtration systems for the nuclear industry that will reduce the cost and volume of nuclear waste associated with present systems. We have developed a new theory of the electrostatic filter that is consistent with experimental tests made during transient and steady-state conditions. For these tests, we used ac and dc electric fields, insulated and noninsulated electrodes, and conducting and nonconducting filter media; all tests were conducted in our small-scale 25 l/s test system, using sodium chloride aerosols. Our theory employs a new mechanism based on the attraction between charged particles and charged fibers in addition to the previously proposed mechanism based on the attraction between charged particles and polarized fibers. In this theory, fibers are charged when charged particles deposit on them. We have also developed a theoretical model that explains the increase in filter efficiency and pressure drop when particles load on the filter. The filter loading tests we conducted to evaluate this model verify its accuracy to a remarkable degree. By using the model equations, we are thus able to explain the observed increase in filter efficiency as a function of particle mass loading, particle size, and particle-particle collection efficiency. Two systems we developed for use in the nuclear industry use electric fields to increase the performance of fibrous filters. One is designed for use inside glove boxes to control radioactive particles at their source; the other is designed for use in ventilation systems. Here we report the results of laboratory and field evaluations for the glove box system.

  3. Microfluidic filtration system to isolate extracellular vesicles from blood.

    Science.gov (United States)

    Davies, Ryan T; Kim, Junho; Jang, Su Chul; Choi, Eun-Jeong; Gho, Yong Song; Park, Jaesung

    2012-12-21

    Extracellular vesicles are released by various cell types, particularly tumor cells, and may be potential targets for blood-based cancer diagnosis. However, studies performed on blood-borne vesicles to date have been limited by lack of effective, standardized purification strategies. Using in situ prepared nanoporous membranes, we present a simple strategy employing a microfluidic filtration system to isolate vesicles from whole blood samples. This method can be applied to purify nano-sized particles from blood allowing isolation of intact extracellular vesicles, avoiding the need for laborious and potentially damaging centrifugation steps or overly specific antibody-based affinity purification. Porous polymer monoliths were integrated as membranes into poly(methyl methacrylate) microfluidic chips by benchtop UV photopolymerization through a mask, allowing precise positioning of membrane elements while preserving simplicity of device preparation. Pore size could be manipulated by changing the ratio of porogenic solvent to prepolymer solution, and was tuned to a size proper for extraction of vesicles. Using the membrane as a size exclusion filter, we separated vesicles from cells and large debris by injecting whole blood under pressure through the microfluidic device. To enhance isolation purity, DC electrophoresis was employed as an alternative driving force to propel particles across the filter and increase the separation efficiency of vesicles from proteins. From the whole blood of melanoma-grown mice, we isolated extracellular vesicles and performed RT-PCR to verify their contents of RNA. Melan A mRNA derived from melanoma tumor cells were found enriched in filtered samples, confirming the recovery of vesicles via their cargo. This filtration system can be incorporated into other on-chip processes enabling integrated sample preparation for the downstream analysis of blood-based extracellular vesicles.

  4. Removal of geosmin and 2-methylisoborneol by biological filtration.

    Science.gov (United States)

    Elhadi, S L N; Huck, P M; Slawson, R M

    2004-01-01

    The quality of drinking water is sometimes diminished by the presence of certain compounds that can impart particular tastes or odours. One of the most common and problematic types of taste and odour is the earthy/musty odour produced by geosmin (trans-1, 10-dimethyl-trans-9-decalol) and MIB (2-methylisoborneol). Taste and odour treatment processes including powdered activated carbon, and oxidation using chlorine, chloramines, potassium permanganate, and sometimes even ozone are largely ineffective for reducing these compounds to below their odour threshold concentration levels. Ozonation followed by biological filtration, however, has the potential to provide effective treatment. Ozone provides partial removal of geosmin and MIB but also creates other compounds more amenable to biodegradation and potentially undesirable biological instability. Subsequent biofiltration can remove residual geosmin and MIB in addition to removing these other biodegradable compounds. Bench scale experiments were conducted using two parallel filter columns containing fresh and exhausted granular activated carbon (GAC) media and sand. Source water consisted of dechlorinated tap water to which geosmin and MIB were added, as well as, a cocktail of easily biodegradable organic matter (i.e. typical ozonation by-products) in order to simulate water that had been subjected to ozonation prior to filtration. Using fresh GAC, total removals of geosmin ranged from 76 to 100% and total MIB removals ranged from 47% to 100%. The exhausted GAC initially removed less geosmin and MIB but removals increased over time. Overall the results of these experiments are encouraging for the use of biofiltration following ozonation as a means of geosmin and MIB removal. These results provide important information with respect to the role biofilters play during their startup phase in the reduction of these particular compounds. In addition, the results demonstrate the potential biofilters have in responding to

  5. Robust scale-up of dead end filtration: impact of filter fouling mechanisms and flow distribution.

    Science.gov (United States)

    Laska, Michael E; Brooks, Ralph P; Gayton, Marshall; Pujar, Narahari S

    2005-11-05

    Robust design of a dead end filtration step and the resulting performance at manufacturing scale relies on laboratory data collected with small filter units. During process development it is important to characterize and understand the filter fouling mechanisms of the process streams so that an accurate assessment can be made of the filter area required at manufacturing scale. Successful scale-up also requires integration of the lab-scale filtration data with an understanding of flow characteristics in the full-scale filtration equipment. A case study is presented on the development and scale-up of a depth filtration step used in a 2nd generation polysaccharide vaccine manufacturing process. The effect of operating parameters on filter performance was experimentally characterized for a diverse set of process streams. Filter capacity was significantly reduced when operating at low fluxes, caused by both low filtration pressure and high stream viscosity. The effect of flux on filter capacity could be explained for a variety of diverse streams by a single mechanistic model of filter fouling. To complement the laboratory filtration data, the fluid flow and distribution characteristics in manufacturing-scale filtration equipment were carefully evaluated. This analysis identified the need for additional scale-up factors to account for non-uniform filter area usage in large-scale filter housings. This understanding proved critical to the final equipment design and depth filtration step definition, resulting in robust process performance at manufacturing scale. Copyright (c) 2005 Wiley Periodicals, Inc.

  6. Self-assembled nanowire arrays as three-dimensional nanopores for filtration of DNA molecules.

    Science.gov (United States)

    Rahong, Sakon; Yasui, Takao; Yanagida, Takeshi; Nagashima, Kazuki; Kanai, Masaki; Meng, Gang; He, Yong; Zhuge, Fuwei; Kaji, Noritada; Kawai, Tomoji; Baba, Yoshinobu

    2015-01-01

    Molecular filtration and purification play important roles for biomolecule analysis. However, it is still necessary to improve efficiency and reduce the filtration time. Here, we show self-assembled nanowire arrays as three-dimensional (3D) nanopores embedded in a microfluidic channel for ultrafast DNA filtration. The 3D nanopore structure was formed by a vapor-liquid-solid (VLS) nanowire growth technique, which allowed us to control pore size of the filtration material by varying the number of growth cycles. λ DNA molecules (48.5 kbp) were filtrated from a mixture of T4 DNA (166 kbp) at the entrance of the 3D nanopore structure within 1 s under an applied electric field. Moreover, we observed single DNA molecule migration of T4 and λ DNA molecules to clarify the filtration mechanism. The 3D nanopore structure has simplicity of fabrication, flexibility of pore size control and reusability for biomolecule filtration. Consequently it is an excellent material for biomolecular filtration.

  7. Tools for Schools: Filtration for Improved Air Quality. Technical Services Bulletin.

    Science.gov (United States)

    2001

    This product bulletin addresses air pollution control in educational facilities to enhance educational performance, provides air quality recommendations for schools, and examines the filtration needs of various school areas. The types of air particles typically present are highlighted, and the use of proper filtration to control gases and vapors…

  8. Filtration of Nanoparticles: Evolution of Cake Structure and Pressure-Drop

    DEFF Research Database (Denmark)

    Elmøe, Tobias Dokkedal; Tricoli, Antonio; Grunwaldt, Jan-Dierk

    2009-01-01

    with constant solid volume fraction began to form, accompanied with build-up of pressuredrop which was in excellent agreement with classic cake filtration theory. An expression for the solid volume fraction of the cake (fsd,c) was obtained as a sole function of Pe. In addition, the filtration efficiency became...

  9. Filtration track membranes and their biomedical applications; Trekowe membrany filtracyjne oraz ich zastosowania biomedyczne

    Energy Technology Data Exchange (ETDEWEB)

    Buczkowski, M.; Wawszczak, D.; Starosta, W. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1997-10-01

    The characteristics of track filtration membranes has been performed. The investigation of radiation resistance has been carried out for different types of polymer foil used as a membrane material. Biomedical applications of track filtration membranes have been presented and discussed. 10 refs, 10 figs.

  10. Treatment of plasmapheresis refractory thrombotic thrombocytopenic purpura with double-filtration membrane plasmapheresis.

    Science.gov (United States)

    Karakus, Volkan; Deveci, Burak; Kurtoğlu, Erdal

    2013-06-01

    Thrombotic thrombocytic purpura (TTP) is a life-threatening disorder. Without plasma exchange treatment (PET) the mortality rate is quite high. Double-filtration plasmapheresis is an alternative opportunity for TTP patients refractory to PET. Here we report our experience in a refractory TTP patient who was successfully treated by means of double-filtration plasmapheresis therapy.

  11. Spunlaced and chemically bonded nonwovens for filtration applications: Performance evaluation and comparison

    CSIR Research Space (South Africa)

    Boguslavsky, L

    2008-11-01

    Full Text Available The main function of textile filter media in air filtration is to control air pollution. Air filtration plays an important role in improving air quality and hygiene. The demands for air quality and hygiene at work places have increased greatly due...

  12. The Application of Homogenate and Filtrate from Baltic Seaweeds in Seedling Growth Tests

    Directory of Open Access Journals (Sweden)

    Izabela Michalak

    2017-02-01

    Full Text Available Algal filtrate and homogenate, obtained from Baltic seaweeds, were applied in seedling growth tests. Radish seeds were used in order to assess algal products phytotoxicity and their biostimulant effect on growth and nutrient uptake. Algal filtrate, at concentrations ranging from 5.0% to 100% was used for seed soaking and as a liquid biostimulant (soil and foliar application. Algal homogenate was developed for seed coating. Algal filtrate and homogenate were also enriched with Zn(II ions in order to examine the influence on metal ion complexation. The optimal doses of algal filtrate and homogenate, as well as soaking time were established. Multi-elemental analyses of the raw biomass, filtrate, homogenate, and radish were also performed using ICP-OES (Inductively Coupled Plasma—Optical Emission Spectrometry. The best results in terms of seedlings’ length and weight were obtained using clear filtrate at a concentration of 50% applied to the soil and for homogenate applied at a dose of 50 mg/g of seeds. Clear filtrate at a concentration of 50% used for seed soaking for one hour showed the best results. The applied algal products increased the content of elements in seedlings. Among the tested products, a concentration of 50% algal filtrate is recommended for future pot and field experiments.

  13. Resolution of the three dimensional structure of components of the glomerular filtration barrier

    DEFF Research Database (Denmark)

    Arkill, Kenton P; Qvortrup, Klaus; Starborg, Tobias

    2014-01-01

    The human glomerulus is the primary filtration unit of the kidney, and contains the Glomerular Filtration Barrier (GFB). The GFB had been thought to comprise 3 layers - the endothelium, the basement membrane and the podocyte foot processes. However, recent studies have suggested that at least two...

  14. Measurement of glomerular filtration rate in adults: accuracy of five single-sample plasma clearance methods

    DEFF Research Database (Denmark)

    Rehling, M; Rabøl, A

    1989-01-01

    After an intravenous injection of a tracer that is removed from the body solely by filtration in the kidneys, the glomerular filtration rate (GFR) can be determined from its plasma clearance. The method requires a great number of blood samples but collection of urine is not needed. In the present...

  15. Clinical use of estimated glomerular filtration rate for evaluation of kidney function

    DEFF Research Database (Denmark)

    Broberg, Bo; Lindhardt, Morten; Rossing, Peter;

    2013-01-01

    Estimating glomerular filtration rate by the Modification of Diet in Renal Disease or Chronic Kidney Disease Epidemiology Collaboration formulas gives a reasonable estimate of kidney function for e.g. classification of chronic kidney disease. Additionally the estimated glomerular filtration rate...

  16. Effect of leukocyte filtration on the P-selectin expression of apheresis platelets.

    Science.gov (United States)

    Xie, Z T; Chen, C; Zhang, S H; Yang, H M; Tao, Z H

    2015-06-01

    The aim of this study was to investigate the effect of leukocyte filtration on the P-selectin (CD62P) surface expression of apheresis platelets during the retention period. Ten bags of apheresis platelets stored for 1 day (0-24 h) and 10 bags of apheresis platelets stored for 2 days (24-48 h) were used for leukocyte filtration (experimental group). Ten bags of apheresis platelets with the corresponding retention periods but without filtration were used as a negative control (control group). Thereafter, 100 μL of platelet suspensions from apheresis platelets with or without leukocyte filtration were sampled before and after leukocyte filtration for the detection of CD62P surface expression by flow cytometry. No statistical difference in the CD62P surface expression of apheresis platelets was observed before and after leukocyte filtration (P > 0.05), neither did the CD62P surface expression exhibit any change among the different retention periods. Leukocyte filtration does not affect the CD62P surface expression of apheresis platelets stored for up to 2 days, which indicates that leukocyte filtration does not damage the activation of apheresis platelets within the retention period.

  17. Theoretical comparison of filtration by the renal glomerulus and artificial membranes.

    Science.gov (United States)

    Tsuji, M; Sakai, K

    1999-01-01

    Improvement in filtration performance of artificial membranes will be possible if their structure mimics the renal glomerulus. Blood filtration with glomerular capillary and artificial membranes was, therefore, modeled to clarify the effects of their structure on filtration rates. Filtration rates were obtained by dividing membrane modules axially into a number of sections and using a calculus of finite differences. The modules were assumed to be composed of straight hollow fibers arranged in parallel, with a membrane surface area of 1.5 m2. The mean transmembrane pressure (TMP) was assumed to be too low for a protein gel layer to form on the membrane surface. A decrease in the inner diameter of membrane hollow fibers led to an increase in filtration rate because of an increased film mass transfer coefficient. A decrease in hollow fiber length also produced an increase in filtration rate because of decreased axial TMP drop. The glomerular capillary has a higher filtration rate than artificial membranes because of the low TMP drop and the low osmotic pressure at the membrane surface. Decreasing both the inner diameter and the length of the hollow fibers is effective in increasing the filtration rate at constant TMP.

  18. ACCUMULATION OF ALKALIS IN THE RECYCLING FILTRATE OF THE PHOSPHOGYPSUM PULPS

    Directory of Open Access Journals (Sweden)

    ANTANAS KAZILIUNAS

    2011-12-01

    Full Text Available Sodium and potassium combinations existing in phosphogypsum are highly soluble and remain in the filtrate, their amount increasing with each recycle. It has been determined that the amount of alkalis in the recycling filtrate depends on an amount of alkalis in uncleaned phosphogypsum, a number of recycles in the filtrate, the technology of the phosphogypsum pulp preparation and an amount of soluble phosphates. New phosphate formations composed in an acid medium (pH = 4.5-5 are well crystalized crystals. They do not alter the filtrability of the phosphogypsum pulp. The new combinations formed in an alkaline medium (pH = 7-11 are colloidal. They settle down on the surface of the hard particles and make the filtration of the phosphogypsum pulp complicated. The filtrated phosphogypsum is more humid which causes the growth of the amount of alkalis carried out together with moisture and thus the lower alkali concentration is observed in the recycling filtrate. In the discussed case, the larger amount of soluble phosphates of uncleaned phosphogypsum is formed the larger amount of the colloidal particles in the neutralized phosphogypsum pulp which results in complicated filtration. In all the cases, the alkali concentration in the recycling filtrate approaches the maximum degree which would take place if alkalis existing in uncleaned phosphogypsum were thawed in humidity of cleaned phosphogypsum.

  19. Biological Control of Aphid Using Fungal Culture and Culture Filtrates of Beauveria bassiana.

    Science.gov (United States)

    Kim, Jeong Jun; Jeong, Gayoung; Han, Ji Hee; Lee, Sangyeob

    2013-12-01

    Aphids are one of the most destructive pests in crop production such as pepper, cucumber, and eggplants. The importance of entomopathogenic fungi as alternative pest control agents is increasing. Conidia of entomopathogenic fungi are influenced by environmental conditions, such as temperature and relative humidity, and cause slow and fluctuating mortality. These factors have prevented wider application and use of biocontrol agents. For investigation of means of mitigation of such problems, we conducted bioassays with 47 fungal culture filtrates in order to evaluate the potential of secondary metabolites produced by entomopathogenic fungi for use in aphid control. Among 47 culture filtrates cultured potato dextrose broth, filtrate of Beauveria bassiana Bb08 showed the highest mortality (78%) against green peach aphid three days after treatments. Filtrate of Bb08 cultured in Adamek's medium showed higher toxicity as 100% to third instar nymphs of the aphid compared with seven other filtrates cultured in different broths amended with colloidal chitin or oil. The culture filtrates and fungal cultures from media amended with colloidal chitin or oil had lower control efficacies than filtrates without these additives in three different media. These results indicate that the fungal culture fluid or culture filtrate of B. bassiana Bb08 cultured in Adamek's medium has potential for development as a mycopesticide for aphid control.

  20. Comparative toxicities of oxygen, ozone, chlorine dioxide, and chlorine bleaching filtrates - microtox toxicities of raw and processed filtrates

    Energy Technology Data Exchange (ETDEWEB)

    Ard, T.A.; McDonough, T.J.

    1995-12-31

    It has claimed that effluents from the bleaching of kraft pulp with chlorine and its compounds have deleterious effects on the aquatic environment. It has been further suggested that bleaching without the use of chlorine or its compounds will produce innocuous effluents. To obtain information on the validity of these claims, we have conducted a laboratory study of the toxicity of filtrates from chlorine-based and nonchlorine bleaching processes. We have also examined two related issues. The first is whether any toxicants generated during bleaching are rendered harmless (by neutralization, storage, and biological treatment) before being discharged to the environment. The second related issue is whether any toxicity observed in mill effluents actually originates in the bleaching process, as opposed to being due to raw material components or compounds formed during the pulping step that precedes bleaching. Several conclusions were drawn from this study. (1) There is a background level of toxicity which originates in the oxygen stage, process steps prior to bleaching, or in the wood raw material. It is decreased by neutralization and storage, but residual toxicity may still be detected after two weeks. (2) If the sum of the first and second stage toxicities is taken as an indicator of overall toxicity, the untreated filtrates may be ranked as follows: Control (Background) > D(EO) > Z(EO) > C(EO). However, these toxicities are of no importance in regard to environmental effects because of their ephemeral nature and the likelihood of their being reduced or eliminated prior to effluent discharge. Evidence for this statement is the ease with which all except the C(EO) were detoxified by neutralization and storage. (3) After neutralization and storage for two weeks at room temperature the ranking of toxicities becomes: C(EO) > D(EO) > Z(EO) > Background. The last three are similar in magnitude.

  1. Measurement of water filtration in skeletal muscle in man by an osmotic transient method

    DEFF Research Database (Denmark)

    Palm, T; Nielsen, S L; Lassen, N A

    1983-01-01

    Water filtration in the human forearm was determined with a new method using a hyperoncotic transient of albumin solution infused into the brachial artery. Baseline dilution of labelled albumin in deep forearm vein plasma in excess of the contribution from arterial blood and from infusate...... was assumed to originate from extravascular water filtered into the blood by the transient. The filtration coefficient (Fc) was determined as the ratio between filtered water and increase in colloid osmotic pressure in the blood samples, and gives the filtrative water permeability in the exchange areas...... of the microcirculation. In 10 normal volunteers, Fc was 0.00082 ml (ml mmHg)-1 (SD=0.00007). Multiplication of Fc by plasma flow in the forearm gave a filtration capacity (Kf) of 0.0036 ml (100 ml tissue min mmHg)-1 (SD=0.00137). This filtration capacity (Kf) represents that of fast flowing regions in the forearm...

  2. Pretreatment of highly turbid coal mine drainage by a chemical agent free filtration system

    Institute of Scientific and Technical Information of China (English)

    Zhang Chunhui; He Xiong; Li Kaihe; Wu Dongsheng; Guo Yanrong; Wang Can

    2012-01-01

    A filtration system used without chemical agents for the pretreatment of turbid coal mine drainage is described in this paper.The influence of different aperture sizes and different motor speeds was investigated during the study.The experimental results show that for aperture diameters of 0.4,0.6,or 0.8 mm smaller apertures provide more complete filtration.Rotations of 12,20,28,or 40 r/min show that higher speeds give more efficient filtration.Suspended solids decreased in both particle size and concentration after the filtration.The separated slime can be directly reused as a fuel.Efficient filtration pretreatment systems for coal mine drainage were investigated and the economic feasibility is analyzed in this article.

  3. Continuous Processing of Active Pharmaceutical Ingredients Suspensions via Dynamic Cross-Flow Filtration.

    Science.gov (United States)

    Gursch, Johannes; Hohl, Roland; Toschkoff, Gregor; Dujmovic, Diana; Brozio, Jörg; Krumme, Markus; Rasenack, Norbert; Khinast, Johannes

    2015-10-01

    Over the last years, continuous manufacturing has created significant interest in the pharmaceutical industry. Continuous filtration at low flow rates and high solid loadings poses, however, a significant challenge. A commercially available, continuously operating, dynamic cross-flow filtration device (CFF) is tested and characterized. It is shown that the CFF is a highly suitable technology for continuous filtration. For all tested model active pharmaceutical ingredients, a material-specific strictly linear relationship between feed and permeate rate is identified. Moreover, for each tested substance, a constant concentration factor is reached. A one-parameter model based on a linear equation is suitable to fully describe the CFF filtration performance. This rather unexpected finding and the concentration polarization layer buildup is analyzed and a basic model to describe the observed filtration behavior is developed.

  4. Impaired autoregulation of glomerular filtration rate in type 1 (insulin-dependent) diabetic patients with nephropathy

    DEFF Research Database (Denmark)

    Parving, H H; Kastrup, Helge; Smidt, U M;

    1984-01-01

    served as controls. Renal function was assessed by glomerular filtration rate (single bolus 51Cr-EDTA technique) and urinary albumin excretion rate (radial immunodiffusion). The study was performed twice within 2 weeks, with the subjects receiving an intravenous injection of either clonidine (225...... arterial blood pressure in all three groups (16-18 mmHg). While glomerular filtration rate and urinary albumin excretion rate remained unchanged in both control groups after clonidine injection, glomerular filtration rate diminished from 78 to 71 ml/min per 1.73 m2 (p les than 0.01), and urinary albumin...... excretion declined from 1707 to 938 micrograms/min (p less than 0.01) in the patients with diabetic nephropathy. Our results suggest that an intrinsic vascular (arteriolar) mechanism underlying the normal autoregulation of glomerular filtration rate, i.e. the relative constancy of glomerular filtration rate...

  5. Derivation of total filtration thickness for diagnostic x-ray source assembly

    Science.gov (United States)

    Sekimoto, Michiharu; Katoh, Yoh

    2016-08-01

    The method defined by the IEC 60522 for determining the inherent filtration of an x-ray source device is applicable only for a limited range of tube voltage. Because the users cannot legally remove the x-ray movable diaphragm of the x-ray source device, total filtration, which is the sum of the additional filtration diaphragm movable for specific filtration and x-ray, cannot be measured. We develop a method for simply obtaining the total filtration for different tube voltage values. Total filtration can be estimated from a ratio R‧ of the air kerma Kx+T\\prime , which is measured with an Al plate with thickness T, and Kx\\prime measured without an Al plate. The conditions of the target material of the x-ray source device are then entered into the Report 78 Spectrum Processor to calculate the air kerma K x and K x+T for Al thicknesses x and (x  +  T), respectively, to obtain R. The minimum value of x, which is the difference between the R and R‧, is the total filtration of the x-ray source device. The total filtration calculated using the industrial x-ray source device was within  ±1% in the 40-120 kV range. This method can calculate the total filtration using air kerma measurements with and without the Al plate. Therefore, the load on the x-ray tube can be reduced, and preparation of multiple Al plates is not necessary. Furthermore, for the 40-120 kV tube voltage range, the user can easily measure the total filtration.

  6. Understanding Deep Bed Filtration by Direct Micro-scale Particulate Flow Modelling

    Science.gov (United States)

    Mirabolghasemi, M.; Prodanovic, M.

    2013-12-01

    Filtration of suspensions through porous beds occurs in a variety of applications such as drilling mud infiltration into rock formations and waste water treatment. Accurate modelling of filtration through porous media on macroscopic scale often requires a precise estimate of the filtration coefficient, which reflects the fraction of particles that get retained in the filter medium. A large number of deep bed filtration models assume a constant entrapment rate without taking into account the rate of particle release back into the flow. In addition, the available models often assume instantaneous entrapment, which ignores particle rolling. These assumptions lead to an almost static description of filtration phenomenon, which is in fact highly dynamic in nature. In this study we used a micro-scale simulation approach to understand the filtration of suspensions through a sphere pack. We applied a semi-coupled CFD-DEM method to directly model the fluid and particulate flow through the extracted pore space. The accuracy of the geometrical description of the flow domain was tested by calculating its porosity and permeability and comparing those to measured values. The results of the simulation provide the distribution of particle and fluid velocities throughout the filtration process. These velocity distributions show that under our simulation conditions, a significant portion of particles travel with a velocity 4 to 5 orders of magnitude slower than the average fluid velocity, which indicates that particle rolling is not negligible. Based on these results we propose a modified definition of filtration coefficient and estimate its values. Overall, this study provides an improved insight into deep bed filtration and reveals the absence of a granular phase flow equation in the existing deep bed filtration formulation. Finally, while we worked with sphere packing for this initial study, the simulation can take any pore space described by a binary (segmented) image and is

  7. Phosphorus removal from municipal wastewater by hydrous ferric oxide reactive filtration and coupled chemically enhanced secondary treatment: part II--mechanism.

    Science.gov (United States)

    Newcombe, R L; Strawn, D G; Grant, T M; Childers, S E; Möller, G

    2008-03-01

    The removal mechanism of a hydrous ferric oxide (HFO) reactive filtration (RF) process with coupled chemically enhanced secondary treatment (RECYCLE) for phosphorus removal from municipal wastewater (HFO-RF-RECYCLE) was examined. A 0.95-ML/d (0.25-mgd) demonstration of HFO-RF-RECYCLE was performed at a municipal wastewater treatment plant equipped with oxidation ditches and secondary clarifiers. Influent to the plant averaged 6.0 mg/L phosphorus, with a 3-month tertiary effluent average of 0.011 mg/L phosphorus. In addition to aqueous geochemical modeling, experiments with surface charge, scanning electron microscopy, adsorptive capacity, thermal desorption, and most probable number of iron(III)-reducing bacteria were performed on samples from the system, to determine the major phosphorus-removal pathways. Results suggest that, in addition to filtration of particulate phosphorus, the low tertiary effluent total phosphorus result was achieved by adsorption.

  8. The Role of Filtration in Maintaining Clean Heat Exchanger Coils

    Energy Technology Data Exchange (ETDEWEB)

    Li Yang; James E. Braun; Eckhard A. Groll

    2004-06-30

    The main purpose of the study was to investigate the role of filtration in maintaining clean heat exchanger coils and overall performance. Combinations of 6 different levels of filtration (MERV 14, 11, 8, 6, 4, and no filter) and 4 different coils (an eight-row lanced-fin coil, HX8L), (an eight-row wavy-fin coil, HX8W), (a four-row lanced-fin coil, HX4L) and (a two-row lanced-fin coil, HX2L) were tested at 4 different air velocities (1.52, 2.03, 2.54,3.05 m/s (300, 400, 500, 600 ft/min)). The fouled conditions were obtained after injection of 600 grams of ASHRAE standard dust upstream of the filter/coil combination. This magnitude of dust is representative of a year of normal operation for an air conditioning system. The air-side pressure drops of the coils and filters and air-side heat transfer coefficients of the coils were determined from the measurements under the clean and fouled conditions. Depending upon the filter and coil test, the coil pressure drops increased in the range of 6%-30% for an air velocity at 2.54 m/s (500 ft/min). The impact was significantly greater for tests performed without a filter. The largest relative effect of fouling on pressure drop occurs for coils with fewer rows and having lanced fins. Coils with a greater number of rows can hold more dust so that a fixed amount of dust has a relatively smaller impact. The impact of fouling on air-side heat transfer coefficients was found to be relatively small. In some cases, heat transfer was actually enhanced due to additional turbulence caused by the presence of dust. The experimental results for pressure drops and heat transfer coefficients were correlated and the correlations were implemented within computer models of prototypical rooftop air conditioners and used to evaluate the impact of fouling on cooling capacity and EER. The equipment cooling capacity is reduced with fouling primarily because of a decrease in air flow due to the increase pressure drop rather than due to changes in h

  9. A Combined Approach to Measure Micropollutant Behaviour during Riverbank Filtration

    Science.gov (United States)

    van Driezum, Inge; Saracevic, Ernis; Derx, Julia; Kirschner, Alexander; Sommer, Regina; Farnleitner, Andreas; Blaschke, Alfred Paul

    2016-04-01

    Riverbank filtration (RBF) systems are widely used as natural treatment process. The advantages of RBF over surface water abstraction are the elimination of for example suspended solids, biodegradable compounds (like specific micropollutants), bacteria and viruses (Hiscock and Grischek, 2002). However, in contrast to its importance, remarkably less is known on the respective external (e.g. industrial or municipal sewage) and the internal (e.g. wildlife and agricultural influence) sources of contaminants, the environmental availability and fate of the various hazardous substances, and its potential transport during soil and aquifer passage. The goal of this study is to get an insight in the behaviour of various micropollutants and microbial indicators during riverbank filtration. Field measurements were combined with numerical modelling approaches. The study area comprises an alluvial backwater and floodplain area downstream of Vienna. The river is highly dynamic, with discharges ranging from 900 m3/s during low flow to 11000 m3/s during flood events. Samples were taken in several monitoring wells along a transect extending from the river towards a backwater river in the floodplain. Three of the piezometers were situated in the first 20 meters away from the river in order to obtain information about micropollutant behaviour close to the river. A total of 9 different micropollutants were analysed in grab samples taken under different river flow conditions (n=33). Following enrichment using SPE, analysis was performed using high performance liquid chromatography-tandem mass spectrometry. Faecal indicators (E. coli and enterococci) and bacterial spores were enumerated in sample volumes of 1 L each using cultivation based methods (ISO 16649-1, ISO 7899-2:2000 and ISO 6222). The analysis showed that some compounds, e.g. ibuprofen and diclofenac, were only found in the river. These compounds were already degraded in the first ten meters away from the river. Analysis of

  10. DESTRUCTION OF XENOBIOTICS BY CULTURE FILTRATE FROM XYLOTROPHIC BASIDIOMYCETES

    Directory of Open Access Journals (Sweden)

    Fedotov O. V.

    2015-12-01

    Full Text Available The article deals with the efficiency of pollutants biodegradation by xylotrophic basidiomycetes submerged cultures grown on standard glucose-peptone medium (GPM. The efficiency of pollutants biodegradation was determined by the model compound – dye Methyl Orange. The purpose of the work is screening of 19 species 81 strains xylotrophic basidiomycetes cultures on the indicator of the dye oxidative degradation efficiency and exploring the possibility of induction of this indicator by modifying the culture medium. The biodegradation efficiency was determined by following method. Assigned amount of culture filtrate (experiment or medium (control was added to the 0.001% solution of Methyl Orange in sodium acetate buffer. pH of the reaction mixture was 4.4 units. Samples were incubated at +40°C for 48 hours. Then pH of the reaction mixture was set up at 3.1 units using sodium acetate buffer and the optical density of solutions at a wavelength of 506 nm was measured. The efficiency of biodegradation was calculated by the difference of the optical density of control and experiment as a percentage. The most promising strains – F. velutipes F-1105, P. eryngii P-er, T. hirsuta Th-11 and D. quercina Dq-08 were selected. The composition of the glucose-peptone medium was modified for these strains by the introduction in the medium lignosulfonate, Tween 80, Kirk’s minerals solution and selecting the concentration of these components. According to the study for the purpose of pollutants degradation it is advisable to cultivate F. velutipes F-1105 strain on modified GPM, which further comprises at 1 l: lignosulfonate – 3.5 g; Tween 80 – 1.0 g, Kirk’s minerals solution – 70 ml; P. eryngii P-er strain – 5.0 g, 1.0 g, 70 ml; T. hirsuta Th-11 strain – 5.0 g, 1.0 g, 105 ml; and D. quercina Dq-08 strain – 6.5 g, 1.0 g, 105 ml, respectively. This allowed to increase the model compound degradation efficiency by the culture filtrate of strain F

  11. Evaluation of Filtration and UV Disinfection for Inactivation of Viruses in Non-Community Water Systems in Minnesota

    Science.gov (United States)

    This study evaluated filtration and disinfection processes for removal and inactivation of pathogens in non-community water systems (NCWS) in two surface water supplies. Pretreatment systems included 1) pressure sand filtration, and 2) granular activated carbon adsorption, and 3...

  12. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  13. Effect of mycosynthesized silver nanoparticles from filtrate of Trichoderma harzianum against larvae and pupa of dengue vector Aedes aegypti L.

    Science.gov (United States)

    Sundaravadivelan, Chandran; Padmanabhan, Madanagopal Nalini

    2014-03-01

    Mosquitoes transmit dreadful diseases, causing millions of deaths every year. Therefore, screening for larvicidal and pupicidal activity of microbial extracts attributes could lead to development of new and improved mosquito control methods that are economical and safe for nontarget organisms and are ecofriendly. Synthetic chemical insecticides occupy predominant position in control strategies. These hazardous chemicals exert unwarranted toxicity and lethal effects on nontarget organisms, develop physiological resistance in target, and cause adverse environmental effect. For vector control, fungal-mediated natural products have been a priority in this area at present. In the current study, effective larvicidal and pupicidal effect of mycosynthesized silver nanoparticles (Ag NPs) using an entomopathogenic fungi Trichoderma harzianum against developmental stages of the dengue vector Aedes aegypti was investigated. An attractive possibility of green nanotechnology is to use microorganisms in the synthesis of nanosilver especially Ag NPs. The mycosynthesized Ag NPs were characterized to find their unique properties through UV-visible spectrophotometer, X-ray diffraction analysis, Fourier transform infrared, and surface characteristics by scanning electron microscopy. To analyze the bioefficacy, different test concentrations for extracellular filtrate (0.2, 0.4, 0.6, 0.8, and 1.0 %) and Ag NPs (0.05, 0.10, 0.15, 0.20, and 0.25 %) were prepared to a final volume of 200 mL using deionized water; 20 larvae of each instars (I-IV) and pupa were exposed to each test concentration separately which included a set of control (distilled water) group with five replicates. Characterization of the synthesized Ag NPs were about 10-20 nm without aggregation. Susceptibility of larval instars to synthesized Ag NPs was higher than the extracellular filtrate of T. harzianum alone after 24-h exposure, where the highest mortality was recorded as 92 and 96 % for first and second instars and

  14. Membrane filtration biocathode microbial fuel cell for nitrogen removal and electricity generation.

    Science.gov (United States)

    Zhang, Guangyi; Zhang, Hanmin; Ma, Yanjie; Yuan, Guangen; Yang, Fenglin; Zhang, Rong

    2014-06-10

    Conductive materials with attached biofilms, were used as membrane filtration biocathodes to filter the effluent and supply electrons for denitrification. Stainless steel mesh and carbon felt were employed to fabricate membrane modules, and the two MFC systems were termed as M1 and M2, respectively. High effluent quality was obtained with M1 and M2 in terms of turbidity, COD and ammonium. In M1, no bioelectrochemical denitrification took place, while nitrate decreased from 35.88±4.15 to 27.33±5.32mg-N/L through the membrane in M2, causing a removal efficiency of 23.3±6.5% with respect to cathodic nitrate. The denitrification ceased without electricity. The maximum power densities of M1 and M2 were 121 and 1253mW/m(3), respectively. Micrococcus bacteria and rod-shaped bacteria covered the surface of carbon felt and fewer bacteria were found on stainless steel mesh. According to fluorescence in situ hybridization, the putative bacteria affiliated with Paracoccus genus and Pseudomonas spp. dominated in the interior biofilm on carbon felt for denitrification. Results demonstrate that the carbon felt system can perform bioelectrochemical denitrification to polish the effluent.

  15. Residual urinary extracellular vesicles in ultracentrifugation supernatants after hydrostatic filtration dialysis enrichment

    Science.gov (United States)

    Musante, Luca; Tataruch-Weinert, Dorota; Kerjaschki, Dontscho; Henry, Michael; Meleady, Paula; Holthofer, Harry

    2017-01-01

    ABSTRACT Urinary extracellular vesicles (UEVs) appear an ideal source of biomarkers for kidney and urogenital diseases. The majority of protocols designed for their isolation are based on differential centrifugation steps. However, little is still known of the type and amount of vesicles left in the supernatant. Here we used an isolation protocol for UEVs which uses hydrostatic filtration dialysis as first pre-enrichment step, followed by differential centrifugation. Transmission electron microscopy (TEM), mass spectrometry (MS), western blot, ELISA assays and tuneable resistive pulse sensing (TRPS) were used to characterise and quantify UEVs in the ultracentrifugation supernatant. TEM showed the presence of a variety of small size vesicles in the supernatant while protein identification by MS matched accurately with the protein list available in Vesiclepedia. Screening and relative quantification for specific vesicle markers showed that the supernatant was preferentially positive for CD9 and TSG101. ELISA tests for quantification of exosome revealed that 14%, was left in the supernatant with a particle diameter of 110 nm and concentration of 1.54 × 1010/ml. Here we show a comprehensive characterisation of exosomes and other small size urinary vesicles which the conventional differential centrifugation protocol may lose.

  16. subsection{Fate of the cyanobacterial toxin Microcystin-LR during bank filtration - column experiments and modelling}

    Science.gov (United States)

    Gerstenberg, Karen; Nützmann, Gunnar

    2010-05-01

    Over the past several years there has been an increasing interest in microcystins and other cyanobacterial toxins in surface waters and oxic groundwater. Since these compounds are strong hepatotoxic agents their presence in surface water is undesirable and can especially cause health problems if the contaminated surface water is used for drinking water abstraction by bank filtration. During the subsurface sediment passage microcystins are biodegraded by adapted microorganisms in a co-metabolic way together with other compounds - a process which causes depletion of oxygen in the sediment and production of anoxic zones in the underground. Presence or absence of oxygen as electron acceptor for microbial energetic metabolism is a crucial factor for degradation. Up to now most studies focused on the fate of microcystin under oxic conditions. But if during bank filtration anoxic zones occur, these approaches cannot be used for description and prediction of transport and degradation processes of microcystin in bank filtration sites. For a better understanding of anoxic degradation of microcystins during subsurface sediment passage laboratory column experiments were designed to simulate the transport and degradation conditions in the aquifer. In small columns of about 20 cm length different cyanobacterial concentrations and potential electron acceptors are adjusted. The outflowing water was analyzed with respect to Microcystin-LR and the main ion concentrations. Transport and sorption parameters were investigated by flow experiments, and quantification of the main parameters was done by inverse modelling using a MATLAB inverse transport model. Flow and sorption experiments reconfirmed that Microcystin-LR does not tend to sorb to the sandy material. Considering the anoxic degradation behaviour of the toxin the redox state of the system was assumed to be the most important factor and therefore varied during the experiments by adding supplemental nitrate or nitrite. The

  17. Filtration of Carbon Particulate Emissions from a Plasma Pyrolysis Assembly

    Science.gov (United States)

    Agui, Juan H.; Green, Robert; Vijayakumar, R.; Berger, Gordon; Greenwood, Zach; Abney, Morgan; Peterson, Elspeth

    2016-01-01

    NASA is investigating plasma pyrolysis as a candidate technology that will enable the recovery of hydrogen from the methane produced by the ISS Sabatier Reactor. The Plasma Pyrolysis Assembly (PPA) is the current prototype of this technology which converts the methane product from the Carbon Dioxide Reduction Assembly (CRA) to acetylene and hydrogen with 90% or greater conversion efficiency. A small amount of solid carbon particulates are generated as a side product and must be filtered before the acetylene is removed and the hydrogen-rich gas stream is recycled back to the CRA. We discuss developmental work on several options for filtering out the carbon particulate emissions from the PPA exit gas stream. The filtration technologies and concepts investigated range from fibrous media to monolithic ceramic and sintered metal media. This paper describes the different developed filter prototypes and characterizes their performance from integrated testing at the Environmental Chamber (E-Chamber) at MSFC. In addition, characterization data on the generated carbon particulates, that help to define filter requirements, are also presented.

  18. Integrated photocatalytic filtration array for indoor air quality control.

    Science.gov (United States)

    Denny, Frans; Permana, Eric; Scott, Jason; Wang, Jing; Pui, David Y H; Amal, Rose

    2010-07-15

    Photocatalytic and filtration technologies were integrated to develop a hybrid system capable of removing and oxidizing organic pollutants from an air stream. A fluidized bed aerosol generator (FBAG) was adapted to prepare TiO(2)-loaded ventilation filters for the photodegradation of gas phase ethanol. Compared to a manually loaded filter, the ethanol photodegradation rate constant for the FBAG coated filter increased by 361%. Additionally, the presence of the photogenerated intermediate product, acetaldehyde, was reduced and the time for mineralization to CO(2) was accelerated. These improvements were attributed to the FBAG system providing a more uniform distribution of TiO(2) particles across the filter surface leading to greater accessibility by the UV light. A dual-UV-lamp system, as opposed to a single-lamp system, enhanced photocatalytic filter performance demonstrating the importance of high light irradiance and light distribution across the filter surface. Substituting the blacklight blue lamps with a UV-light-emitting-diode (UV-LED) array led to further improvement as well as suppressed the electrical energy per order (EE/O) by a factor of 6. These improvements derived from the more uniform distribution of light irradiance as well as the higher efficiency of UV-LEDs in converting electrical energy to photons.

  19. Standard filtration practices may significantly distort planktonic microbial diversity estimates

    Directory of Open Access Journals (Sweden)

    Cory Cruz Padilla

    2015-06-01

    Full Text Available Fractionation of biomass by filtration is a standard method for sampling planktonic microbes. It is unclear how the taxonomic composition of filtered biomass changes depending on sample volume. Using seawater from a marine oxygen minimum zone, we quantified the 16S rRNA gene composition of biomass on a prefilter (1.6 μm pore-size and a downstream 0.2 μm filter over sample volumes from 0.05 to 5 L. Significant community shifts occurred in both filter fractions, and were most dramatic in the prefilter community. Sequences matching Vibrionales decreased from ~40-60% of prefilter datasets at low volumes (0.05-0.5 L to less than 5% at higher volumes, while groups such at the Chromatiales and Thiohalorhabdales followed opposite trends, increasing from minor representation to become the dominant taxa at higher volumes. Groups often associated with marine particles, including members of the Deltaproteobacteria, Planctomycetes and Bacteroidetes, were among those showing the greatest increase with volume (4 to 27-fold. Taxon richness (97% similarity clusters also varied significantly with volume, and in opposing directions depending on filter fraction, highlighting potential biases in community complexity estimates. These data raise concerns for studies using filter fractionation for quantitative comparisons of aquatic microbial diversity, for example between free-living and particle-associated communities.

  20. Establishment and application of milk fingerprint by gel filtration chromatography.

    Science.gov (United States)

    Gao, P; Li, J; Li, Z; Hao, J; Zan, L

    2016-12-01

    Raw milk adulteration frequently occurs in undeveloped countries. It not only reduces the nutritional value of milk, but it is also harmful to consumers. In this paper, we focused on investigating an efficient method for the quality control of raw milk protein. A gel filtration chromatography (GFC) fingerprint method combined with chemometrics was developed for fingerprint analysis of raw milk. To optimize the GFC conditions, milk fat was removed by centrifugation, and GFC analysis was performed on a Superdex 75 10/300GL column (Just Scientific, Shanghai, China) with 0.2 M NaH2PO4-Na2HPO4 buffer (pH 7.0) as the mobile phase. The flow rate was 0.5mL/min, and the detection wavelength was set at 280 nm. Ten batches of 120 raw milk samples were analyzed to establish the GFC fingerprint under optimal conditions. Six major peaks common to the chromatogram of each raw milk sample were selected for fingerprint analysis, and the characteristic peaks were used to establish a standard chromatographic fingerprint. Principal component analysis was then applied to classify GFC information of adulterated milk and raw milk, allowing adulterated samples to be effectively screened out from the raw milk in principal component analysis scores plot. The fingerprint method demonstrates promising features in detecting milk protein adulteration.

  1. Standard filtration practices may significantly distort planktonic microbial diversity estimates.

    Science.gov (United States)

    Padilla, Cory C; Ganesh, Sangita; Gantt, Shelby; Huhman, Alex; Parris, Darren J; Sarode, Neha; Stewart, Frank J

    2015-01-01

    Fractionation of biomass by filtration is a standard method for sampling planktonic microbes. It is unclear how the taxonomic composition of filtered biomass changes depending on sample volume. Using seawater from a marine oxygen minimum zone, we quantified the 16S rRNA gene composition of biomass on a prefilter (1.6 μm pore-size) and a downstream 0.2 μm filter over sample volumes from 0.05 to 5 L. Significant community shifts occurred in both filter fractions, and were most dramatic in the prefilter community. Sequences matching Vibrionales decreased from ~40 to 60% of prefilter datasets at low volumes (0.05-0.5 L) to less than 5% at higher volumes, while groups such at the Chromatiales and Thiohalorhabdales followed opposite trends, increasing from minor representation to become the dominant taxa at higher volumes. Groups often associated with marine particles, including members of the Deltaproteobacteria, Planctomycetes, and Bacteroidetes, were among those showing the greatest increase with volume (4 to 27-fold). Taxon richness (97% similarity clusters) also varied significantly with volume, and in opposing directions depending on filter fraction, highlighting potential biases in community complexity estimates. These data raise concerns for studies using filter fractionation for quantitative comparisons of aquatic microbial diversity, for example between free-living and particle-associated communities.

  2. Characterization and modification of particulate properties to enhance filtration performance

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, T.R.; Robinson, M.S.; Vann Bush, P.

    1989-06-22

    This report describes the results of project activities that occurred during the period from March 1 through May 31, 1989. The organization of this report generally follows the outline of work presented in the Project Work Plan. Work performed during this period included tests under Task 2 -- Parametric Tests of Ashes and Fabrics, and Task 3 -- Survey of Methods to Modify Particle Filtration Properties. Discussion of the Task 2 work has been organized topically, rather than adhering to the activities specified in the Work Plan. Cohesive ash from the Tennessee Valley Authority's 160 MW Atmospheric Fluidized-Bed Combustor at the Shawnee Plant in Paducah, Kentucky was obtained during this quarter and has been analyzed in the laboratory. The second phase of the abstract search and review of pertinent articles included in activity 3.1 is nearly complete. A summary of this phase of the literature search is included in this report. A variety of potential conditioning agents have been evaluated during this reporting period. These agents include sodium bicarbonate, hydrated lime, various grades of fine silica powder, gasifier char, glass beads and glass fibers. The three source ashes have been mixed with these agents in different concentrations and using various mixing techniques. These tests are continuing, and this report contains a summary of the combinations evaluated during this past quarter. 17 figs., 7 tabs.

  3. ALTERNATE HIGH EFFICIENCY PARTICULATE AIR (HEPA) FILTRATION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Bishop; Robert Goldsmith; Karsten Nielsen; Phillip Paquette

    2002-08-16

    In Phase IIA of this project, CeraMem has further developed and scaled up ceramic HEPA filters that are appropriate for use on filtration of vent gas from HLW tanks at DOE sites around the country. This work included procuring recrystallized SiC monoliths, developing membrane and cement materials, and defining a manufacturing process for the production of prototype full sizes HEPA filters. CeraMem has demonstrated that prototype full size filters can be manufactured by producing 9 full size filters that passed DOP aerosol testing at the Oak Ridge Filter Test Facility. One of these filters was supplied to the Savannah River Technical Center (SRTC) for process tests using simulated HLW tank waste. SRTC has reported that the filter was regenerable (with some increase in pressure drop) and that the filter retained its HEPA retention capability. CeraMem has also developed a Regenerable HEPA Filter System (RHFS) design and acceptance test plan that was reviewed by DOE personnel. The design and acceptance test plan form the basis of the system proposal for follow-on work in Phase IIB of this project.

  4. Riverbank filtration in China: A review and perspective

    Science.gov (United States)

    Hu, Bin; Teng, Yanguo; Zhai, Yuanzheng; Zuo, Rui; Li, Jiao; Chen, Haiyang

    2016-10-01

    Riverbank filtration (RBF) for water supplies is used widely throughout the world because it guarantees a sustainable quantity and improves water quality. In this study, the development history and the technical overview of RBF in China are reviewed and summarized. Most RBF systems in China were constructed using vertical wells, horizontal wells, and infiltration galleries in flood plains, alluvial fans, and intermountain basins. Typical pollutants such as NH4+, pathogens, metals, and organic materials were removed or diluted by most RBF investigated. There have recently been many investigations of the interaction between groundwater and surface water and biogeochemical processes in RBF. Comprehensive RBF applications should include not only the positive but also negative effects. Based on a discussion of the advantages and disadvantages, the perspectives of China's RBF technology development were proposed. To protect the security of water supply, China's RBF systems should establish a management system, monitoring system and forecasting system of risk. Guidelines of RBF construction and management should also be issued on the basic of relevant fundamental investigations such as climate influence, clogging, and purification mechanism of water-quality improvement.

  5. Evaluation of gravimetric techniques to estimate the microvascular filtration coefficient.

    Science.gov (United States)

    Dongaonkar, R M; Laine, G A; Stewart, R H; Quick, C M

    2011-06-01

    Microvascular permeability to water is characterized by the microvascular filtration coefficient (K(f)). Conventional gravimetric techniques to estimate K(f) rely on data obtained from either transient or steady-state increases in organ weight in response to increases in microvascular pressure. Both techniques result in considerably different estimates and neither account for interstitial fluid storage and lymphatic return. We therefore developed a theoretical framework to evaluate K(f) estimation techniques by 1) comparing conventional techniques to a novel technique that includes effects of interstitial fluid storage and lymphatic return, 2) evaluating the ability of conventional techniques to reproduce K(f) from simulated gravimetric data generated by a realistic interstitial fluid balance model, 3) analyzing new data collected from rat intestine, and 4) analyzing previously reported data. These approaches revealed that the steady-state gravimetric technique yields estimates that are not directly related to K(f) and are in some cases directly proportional to interstitial compliance. However, the transient gravimetric technique yields accurate estimates in some organs, because the typical experimental duration minimizes the effects of interstitial fluid storage and lymphatic return. Furthermore, our analytical framework reveals that the supposed requirement of tying off all draining lymphatic vessels for the transient technique is unnecessary. Finally, our numerical simulations indicate that our comprehensive technique accurately reproduces the value of K(f) in all organs, is not confounded by interstitial storage and lymphatic return, and provides corroboration of the estimate from the transient technique.

  6. Validating and implementing modified Filinov phase filtration in semiclassical dynamics

    Science.gov (United States)

    Church, Matthew S.; Antipov, Sergey V.; Ananth, Nandini

    2017-06-01

    The Mixed Quantum-Classical Initial Value Representation (MQC-IVR) is a recently introduced approximate semiclassical (SC) method for the calculation of real-time quantum correlation functions. MQC-IVR employs a modified Filinov filtration (MFF) scheme to control the overall phase of the SC integrand, extending the applicability of SC methods to complex systems while retaining their ability to accurately describe quantum coherence effects. Here, we address questions regarding the effectiveness of the MFF scheme in combination with SC dynamics. Previous work showed that this filtering scheme is of limited utility in the context of semiclassical wavepacket propagation, but we find that the MFF is extraordinarily powerful in the context of correlation functions. By examining trajectory phase and amplitude contributions to the real-time SC correlation function in a model system, we clearly demonstrate that the MFF serves to reduce noise by damping amplitude only in regions of highly oscillatory phase leading to a reduction in computational effort while retaining accuracy. Further, we introduce a novel and efficient MQC-IVR formulation that allows for linear scaling in computational cost with the total simulation length, a significant improvement over the more-than quadratic scaling exhibited by the original method.

  7. Implementation Of Adaptive Filtration For Digital Chest Imaging

    Science.gov (United States)

    McAdams, H. Page; Johnson, G. Allan; Suddarth, S. A.; Sheerrier, R. H.; Ravin, C. E.

    1987-07-01

    Previous work has demonstrated the potential for adaptive filtration in processing digital chest images. The technique uses the histogram of the image to determine the pixels (and regions) in which edge enhancement is applied. This paper extends that work by investigating the choice of parameters used in selectively enhancing the mediastinum. The image is separated into its low and high frequency components by convolution with a square kernel. The effect of kernel size was studied with a choice of 17 x 17 mm, which was found to be sufficient to include the frequencies of interest. A serious deficiency in previous implementations of this technique is the existence of ringing artifacts at the juncture of the lung and mediastinum. These result in part from the use of a step function to specify the low frequency image intensity above which high frequencies are amplified. By replacing this step with a smoother (cosine) function, the artifact can be removed. Finally, the amplification constant was examined in light of its effect on both structure and noise in the image.

  8. Membrane fouling in a membrane bioreactor: High filtration resistance of gel layer and its underlying mechanism.

    Science.gov (United States)

    Chen, Jianrong; Zhang, Meijia; Li, Fengquan; Qian, Lei; Lin, Hongjun; Yang, Lining; Wu, Xilin; Zhou, Xiaoling; He, Yiming; Liao, Bao-Qiang

    2016-10-01

    A membrane bioreactor (MBR) was continuously operated to investigate mechanisms of fouling caused by the gel layer in this study. Agar was used as a model foulant for gel layer formation, and filtration resistance of gel layers was systematically assessed. The results showed that gel layer possessed unusually high specific filtration resistance (SFR) and high measured porosity as compared with cake layer. Current knowledge cannot explain the contradiction between high filtration resistance and high porosity of gel layer. A new fouling mechanism based on Flory-Huggins theory was then proposed. Filtration resistance of agar gel layer was found to be independent of pH and ionic strength, but linearly increase with gel thickness. The results are accordant with the mechanism deductions. Simulation of the mechanism model showed that the filtration resistance induced by mixing chemical potential variation was comparable to the experimental data of filtration resistance of agar gel layer, indicating that the proposed mechanism is the predominant mechanism responsible for the high filtration resistance of gel layer. The proposed mechanism was further verified from the bound water viewpoint.

  9. Magnetic filtration with magnetized granular beds: Basic principles and filter performance

    Institute of Scientific and Technical Information of China (English)

    Teymuraz; Abbasov

    2007-01-01

    This study is devoted to the explanation of different characteristics of magnetic filtration and the way these characteristics affect the important filtration parameters. Magnetic fields in pores and the force effect of these fields on magnetic particles and the magnetization properties of packed beds composed of ferromagnetic spheres and metal chips are evaluated. The profile of accumulation and capture regions of the particles, the variation of the fluid velocity in these regions and analytic expressions of particle capture radius are presented. The effects of filtration regime parameters on magnetic filter performance were investigated. An analytical expression has been obtained for the dependence of the logarithmic efficiency coefficient on filtration velocity, the geometry of filter elements, the particle size and other parameters of filtration. The stationary and non-stationary equations of the magnetic filtration processes are given. An expression of magnetic filter performance is shown with dimensionless parameters obtained from the filtration system. These relations are useful for calculations in engineering practice, including the design of magnetic filters, provision of suggestions on construction, and optimization and control of filter operation.

  10. Experimental investigation of air pressure affecting filtration performance of fibrous filter sheet.

    Science.gov (United States)

    Xu, Bin; Yu, Xiao; Wu, Ya; Lin, Zhongping

    2017-03-01

    Understanding the effect of air pressure on their filtration performance is important for assessing the effectiveness of fibrous filters under different practical circumstances. The effectiveness of three classes of air filter sheets were investigated in laboratory-based measurements at a wide range of air pressures (60-130 KPa). The filtration efficiency was found most sensitive to the air pressure change at smaller particle sizes. As the air pressure increased from 60 to 130 KPa, significant decrease in filtration efficiency (up to 15%) and increase in pressure drop (up to 90 Pa) were observed. The filtration efficiency of the filter sheet with largest fiber diameter and smallest solid volume fraction was affected most, while the pressure drop of the filter sheet with smallest fiber diameter and largest solid volume fraction was affected most. The effect of air pressure on the filtration efficiency was slightly larger at greater filter face air velocity. However, the effect of air pressure on the pressure drop was negligible. The filtration efficiency and pressure drop were explicitly expressed as functions of the air pressure. Two coefficients were empirically derived and successfully accounted for the effects of air pressure on filtration efficiency and pressure drop.

  11. Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment.

    Science.gov (United States)

    Ma, Teng-Fei; Chen, You-Peng; Kang, Jia; Gao, Xu; Guo, Jin-Song; Fang, Fang; Zhang, Xiao-Tian

    2016-12-01

    Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).

  12. Evaluation of emerging factors blocking filtration of high-adjunct-ratio wort.

    Science.gov (United States)

    Ma, Ting; Zhu, Linjiang; Zheng, Feiyun; Li, Yongxian; Li, Qi

    2014-08-20

    Corn starch has become a common adjunct for beer brewing in Chinese breweries. However, with increasing ratio of corn starch, problems like poor wort filtration performance arise, which will decrease production capacity of breweries. To solve this problem, factors affecting wort filtration were evaluated, such as the size of corn starch particle, special yellow floats formed during liquefaction of corn starch, and residual substance after liquefaction. The effects of different enzyme preparations including β-amylase and β-glucanase on filtration rate were also evaluated. The results indicate that the emerging yellow floats do not severely block filtration, while the fine and uniform-shape corn starch particle and its incompletely hydrolyzed residue after liquefaction are responsible for filtration blocking. Application of β-amylase preparation increased the filtration rate of liquefied corn starch. This study is useful for our insight into the filtration blocking problem arising in the process of high-adjunct-ratio beer brewing and also provides a feasible solution using enzyme preparations.

  13. Detection of damage of a filter by visualization of filtration process

    Directory of Open Access Journals (Sweden)

    Bílek P.

    2014-03-01

    Full Text Available This paper deals with testing of filters on the basis of visualization of filtration process. A filtration material can be damaged by flow of the filtered medium, high pressure drop and long-term adverse conditions. These negative effects can cause extensive damage of the filtration textile and filtration efficiency decreases. The filter can be also fractured during manufacturing, processing or by improper manipulation. A testing of a purposely damaged filtration textile is described in the article. Experiments were performed on the filtration setup which permits an optical entrance to the position where a sample of filter is placed. A laser sheet is directed into this place. Scattered light from seeding particles in front of and behind the filter is captured by a digital camera. Images from the camera are analyzed and the filtration efficiency versus time and also versus position can be obtained. Measuring chain including light scattering theory and measuring of light intensity by a digital camera are also discussed in the article.

  14. Detection of damage of a filter by visualization of filtration process

    Science.gov (United States)

    Bílek, P.; Šidlof, P.

    2014-03-01

    This paper deals with testing of filters on the basis of visualization of filtration process. A filtration material can be damaged by flow of the filtered medium, high pressure drop and long-term adverse conditions. These negative effects can cause extensive damage of the filtration textile and filtration efficiency decreases. The filter can be also fractured during manufacturing, processing or by improper manipulation. A testing of a purposely damaged filtration textile is described in the article. Experiments were performed on the filtration setup which permits an optical entrance to the position where a sample of filter is placed. A laser sheet is directed into this place. Scattered light from seeding particles in front of and behind the filter is captured by a digital camera. Images from the camera are analyzed and the filtration efficiency versus time and also versus position can be obtained. Measuring chain including light scattering theory and measuring of light intensity by a digital camera are also discussed in the article.

  15. Efficacy of Syringe Filtration for the Selective Isolation of Campylobacter from Chicken Carcass Rinse.

    Science.gov (United States)

    Chon, Jung-Whan; Kim, Hong-Seok; Kim, Dong-Hyeon; Kim, Young-Ji; Sung, Kidon; Kim, Hyunsook; Seo, Kun-Ho

    2017-06-01

    We investigated the efficacy of syringe filtration for selective isolation of Campylobacter from chicken carcass rinse by combining syringe filtration with the conventional culture method. Whole chicken carcass rinses were incubated in Bolton enrichment broth, set aside or subjected to syringe filtration, and streaked on Campy-Cefex agar with or without cefoperazone antibiotic supplement. Compared with the conventional method without filtration, 0.65-μm-pore-size syringe filtration resulted in a significantly higher number of Campylobacter-positive samples (23.8 to 37.5% versus 70.0 to 72.5%; P Campylobacter (93.8% versus 6.3 to 26.3%), and a lower growth index (1 = growth of a few colonies; 2 = growth of colonies on about half of the plate; and 3 = growth on most of the plate) for competing microbiota (2.9 to 3.0 versus 1.2 to 1.4). When syringe filtration was applied, agar plates containing the antibiotic had significantly less contamination (6.3% versus 26.3%; P Campylobacter isolation rate was similar (P > 0.05). Syringe filtration combined with conventional enrichment improved the rate and selectivity of Campylobacter isolation from chicken carcasses.

  16. [Niobium filtration in dental radiology. Effects on image quality and on dosage].

    Science.gov (United States)

    Bianchi, S D; Giovannetti, P; Albrito, F

    1997-06-01

    The necessity of reducing the radiation dose to the patient in diagnostic radiology according to the ALARA guideline established by the ICRP has stimulated the research on additional filtration systems capable of removing the low-energy photons increasing the dose and worsening image quality. Very few literature studies deal with the effects of niobium filtration on image quality in dental radiography with the use of modulation transfer function (MTF) and square wave response function (SWRF). Only one study has considered those effects measuring dose absorption in an anthropomorphic phantom. 1) to study the effects of a 30 microns additional niobium filter on image quality using the SWRF; 2) to compare the doses absorbed in vivo during a complete radiographic survey of the mouth, both with and without niobium filtration. Qualitative studies led us to conclude that niobium filtration does not significantly worsen radiographic image quality. The following doses were measured in the exposures with niobium filtration: 1678 microGy to 6000 microGy (intraoral doses) and 75 microGy to 3643 microGy (skin doses). The comparison with the doses measured during the exposures made with conventional filtration indicates that dose reduction is not significantly advantageous relative to risk reduction. In conclusion, additional niobium filtration is not advisable in dental radiology, also because of the filter cost and of the increased wear of the unit.

  17. Modeling of particle removal in the first coarse media of direct horizontal-flow roughing filtration.

    Science.gov (United States)

    Ahn, H W; Park, N S; Kim, S; Park, S Y; Wang, C K

    2007-03-01

    Horizontal-Flow Roughing Filtration (HRF) is an alternative pretreatment method e.g. prior to Slow Sand Filtration (SSF). However, some of its limitations are that the effluent quality drops drastically at higher turbidity (>200NTU) and at higher filtration rate (>1 m h(-1)). To overcome these drawbacks, we suggested Direct Horizontal-Flow Roughing Filtration (DHRF), which is a modified system of Horizontal-Flow Roughing Filtration (HRF) by addition of a low dose of coagulant prior to filtration. To optimize the DHRF configuration, a conceptual and mathematical model for the coarse compartment has been developed in analogy with multi-plate settler. Data from simple column settling test can be used in the model to predict the filter performance. Furthermore, the model developed herein has been validated by successive experiments. The conventional column settling test has been found to be handy and useful to predict the performance of DHRF for different raw water characteristics (e.g. coagulated or uncoagulated water, different amounts of organic matter, etc.) and different initial process conditions (e.g. coagulant dose, mixing time and intensity, etc.). An optimum filter design for the coarse compartment (grain size 20 mm) has been found to be of 3m h(-1) filtration rate with filter length of 4-4.5 m.

  18. 77 FR 60481 - Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Post-Accident...

    Science.gov (United States)

    2012-10-03

    ... COMMISSION Design, Inspection, and Testing Criteria for Air Filtration and Adsorption Units of Post-Accident..., and Testing Criteria for Air Filtration and Adsorption Units of Post-accident Engineered-Safety... design, inspection, and testing of air filtration and iodine adsorption units of...

  19. Impact of 50% Alcohol to Jet Blends on Aviation Turbine Fuel Filtration and Coalescence

    Science.gov (United States)

    2014-06-20

    50% Alcohol to Jet Blends on Aviation Turbine Fuel Filtration and Coalescence NF&LCFT REPORT 441/14-015 20 June 2014 Prepared By...Aviation Turbine Fuel Filtration and Coalescence 1.0 BACKGROUND In October 2009, Secretary of the Navy Ray Mabus directed the Navy to decrease its...0 ɛ 1 Existent Gum (mg/100 mL) D381 7.0 5.0 Particulate Matter (mg/L) D5452 1.0 0.2 Filtration Time (minutes) MIL-DTL- 5624V 15 6 Micro

  20. Removal of Cryptosporidium sized particle under different filtration temperature, flow rate and alum dosing

    Institute of Scientific and Technical Information of China (English)

    XU Guo-ren; Fitzpatrick S. B. Caroline; Gregory John; DENG Lin-yu

    2007-01-01

    Recent Cryptosporidium outbreaks have highlighted concerns about filter efficiency and in particular particle breakthrough. It is essential to ascertain the causes of Cryptosporidium sized particle breakthrough for Cryptosporidium cannot be destroyed by conventional chlorine disinfection. This research tried to investigate the influence of temperature, flow rate and chemical dosing on particle breakthrough during filtration. The results showed that higher temperatures and coagulant doses could reduce particle breakthrough. The increase of filtration rate made the residual particle counts become larger. There was an optimal dose in filtration and was well correlated to ζ potential.

  1. Synthesis of poly(N-isopropylacrylamide-co-acrylic acid) model compounds for filtration experiments

    DEFF Research Database (Denmark)

    Hinge, Mogens; Christensen, Morten Lykkegaard; Scales, Peter

    2005-01-01

    these biosolid/organic systems and thereby make a basis for further theoretical development with respect to filtration.   Poly(N-isopropylacrylamide-co-acrylic acid) microgels are synthesized by free-radical surfactant free emulsion polymerization as an organic model system for biosolids. The model system...... concentrations of acrylic acid as co-monomer. The microgels have a charge density between 0.2 and 0.9 mmol/g.   Preliminary filtration experiments show that filtration properties of the microgel model system significantly differs from the properties for inorganic colloidals such as titaniumdioxid....

  2. Evaluation of Side Stream Filtration Technology at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Brian K.

    2014-08-01

    This technology evaluation was performed by Pacific Northwest National Laboratory and Oak Ridge National Laboratory on behalf of the Federal Energy Management Program. The objective was to quantify the benefits side stream filtration provides to a cooling tower system. The evaluation assessed the performance of an existing side stream filtration system at a cooling tower system at Oak Ridge National Laboratory’s Spallation Neutron Source research facility. This location was selected because it offered the opportunity for a side-by-side comparison of a system featuring side stream filtration and an unfiltered system.

  3. Harvesting of Dunaliella tertiolecta cells by magnetic filtration

    Science.gov (United States)

    Manousakis, Emmanouil; Manariotis, Ioannis D.

    2015-04-01

    The rising cost and reduced reserves of fossil fuels have enhanced the interest for finding alterative energy sources. Microalgae are considered to be the only sustainable option in biodiesel production for two key points. The energy yield from microalgae is much higher than that of oil producing crops, and the cultivation of algae it is not antagonistic with food supply chain. Because of the small size of microalgae and the dilute nature of algal cultures, the harvesting cost of microalgae is so far a limiting step for the scale up of microalgal biofuel production. It is estimated that the algal harvesting cost is at least 20-30% of the total biomass production cost. Traditional methods, which have been employed for the recovery of microalgal biomass, include centrifugation, gravity separation, filtration, flocculation, and flotation. Alternative approaches, other than conventional methods, capable of processing large cultures volume at a low cost, and reducing effluent toxicity are essential for microalgal biomass production. Magnetic separation is a promising technology and has been applied for algal removal in the mid of 1970s. The aim of this study was to investigate the harvesting of microalgae cells using magnetic microparticles (MPs). Dunaliella tertiolecta was selected as a representative for marine microalgae. The cultivation of microalgae was conducted under continuous artificial light, in 20 L flasks. Iron oxide microparticles were prepared by microwave irradiation of FeSO4 7H2O in an alkaline solution. Samples were taken at different operation intervals to conduct harvesting studies. Batch and flow-through experiments were conducted in order to investigate the effect of the magnetic material on microalgae removal. Algal removal in flow through experiments ranged from 70 to 85% depending on the initial MPs concentration even at very short hydraulic retention times (i.e. 2 min). In batch tests, algal removal was up to 97% at MPs concentration of 490 mg/L.

  4. Energy Implications of In-Line Filtration in California

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Iain S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dickerhoff, Darryl [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Turner, William J.N. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-02-01

    Occupant concern about indoor air quality (IAQ) issues has led to the increased use of more effective air filters in residential heating and cooling systems. This study performed measurements in ten California houses to determine the effects of changing filter performance and related characteristics on the energy use of the heating and cooling systems. Multiple filters were evaluated covering a wide range of filter effectiveness from simple low filtration fiberglass filters up to high efficiency filters that might be used by occupants concerned about IAQ. Sophisticated analysis and simulation tools used the field-testing results to determine filter impacts for a wide range of parameters and California climates. The results indicate that for MERV 10/11/13 filters the effects on energy use are moderate (<5%) over a wide range of performance conditions and climates. Using higher MERV 16 filters can lead to significantly increased energy use (>5%). The high airflow resistance of MERV 16 filters led to excess noise in some test houses from air bypassing the filter and the blower motor. Filter loading rates varied more from house to house than by MERV rating and overall were quite low in many of the homes. Filter related energy use does not need to be addressed for filters of MERV 10/11/13 and MERV 16 filters should only be used with low leakage tested ducts unless the filter is mounted at the blower compartment. MERV 16 filters should only be used if the filter area is sufficient to prevent noise issues and if the duct system has low air flow resistance and low leakage. Filters should be labeled for their air flow resistance, or static pressure at a particular flow rate, that would allow codes and standards to reference a particular performance specification and allow contractors and homeowners to make informed purchases.

  5. Measurement of glomerular filtration rate in the conscious rat.

    Science.gov (United States)

    Pestel, Sabine; Krzykalla, Volker; Weckesser, Gerhard

    2007-01-01

    Glomerular filtration rate (GFR) is an important parameter for studying drug-induced impairments on renal function in rats. The GFR is calculated from the concentration of creatinine and blood urea nitrogen (BUN) in serum and in urine, respectively. Following current protocols serum and urine samples must be taken from the same animal. Thus, in order to determine time-dependent effects it is necessary to use for each time point one separated group of animals. We developed a statistical test which allows analyzing the GFR from two different groups of animals: one used for repeated serum and the other one used for repeated urine analysis. Serum and urine samples were taken from two different sets of rats which were otherwise treated identically, i.e. drug doses, routes of administration (per os or per inhalation) and tap water loading. For each dose group GFR mean, standard deviation and statistical analysis to identify differences between the dose groups were determined. After determination of the optimal time points for measurements, the effect on GFR of the three reference compounds, furosemide, hydrochlorothiazide and formoterol, was calculated. The results showed that the diuretic drugs furosemide and hydrochlorothiazide decreased the GFR and the antidiuretic drug formoterol increased the GFR, as counter regulation on urine loss or urine retention, respectively. A mathematical model and the corresponding algorithm were developed, which can be used to calculate the GFR, and to test for differences between groups from two separated sets of rats, one used for urine, and the other one for serum analysis. This new method has the potential to reduce the number of animals needed and to improve the quality of data generated from various groups of animals in renal function studies.

  6. Maternal glomerular filtration rate in pregnancy and fetal size.

    Directory of Open Access Journals (Sweden)

    Nils-Halvdan Morken

    Full Text Available BACKGROUND: The relationship of maternal glomerular filtration rate (GFR in pregnancy to fetal size needs to be better characterized as it impacts an ongoing debate about confounding effect of maternal GFR in investigations of important environmental contaminants. We aimed to characterize the size of the association between maternal GFR and infant birth weight. MATERIALS AND METHODS: A sub-cohort of 953 selected women (470 women with and 483 women without preeclampsia in the Norwegian Mother and Child Cohort (MoBa, recruited during 2003-2007 were analyzed. GFR in the second trimester was estimated based on plasma creatinine. Birth weight was ascertained from the Medical Birth Registry of Norway. Multivariate linear regression was used to evaluate the association between maternal GFR in second trimester (estimated by the Cockroft-Gault [GFR-CG] and the modification of diet in renal disease [GFR-MDRD] formulas and infant birth weight. Partial correlation coefficients were also calculated. RESULTS: Maternal GFR-CG (β: 0.73 g/ml/min, p = 0.04 and GFR-MDRD (β: 0.83 g/ml/min, p = 0.04 were associated with infant birth weight in models adjusted for maternal weight in kilograms, preeclampsia, and gestational age at delivery (days. Partial correlation coefficients for the association between infant birth weight and GFR were 0.07 for both formulas. Although the birth weight-GFR association was stronger among the women with preeclampsia, the difference from women without preeclampsia was not statistically significant. CONCLUSION: These data support an association between GFR during pregnancy and infant birth weight, and indicate that GFR may confound selected epidemiologic associations.

  7. Riverbank filtration for the treatment of highly turbid Colombian rivers

    Science.gov (United States)

    Gutiérrez, Juan Pablo; van Halem, Doris; Rietveld, Luuk

    2017-05-01

    The poor quality of many Colombian surface waters forces us to seek alternative, sustainable treatment solutions with the ability to manage peak pollution events and to guarantee the uninterrupted provision of safe drinking water to the population. This review assesses the potential of using riverbank filtration (RBF) for the highly turbid and contaminated waters in Colombia, emphasizing water quality improvement and the influence of clogging by suspended solids. The suspended sediments may be favorable for the improvement of the water quality, but they may also reduce the production yield capacity. The cake layer must be balanced by scouring in order for an RBF system to be sustainable. The infiltration rate must remain high enough throughout the river-aquifer interface to provide the water quantity needed, and the residence time of the contaminants must be sufficient to ensure adequate water quality. In general, RBF seems to be a technology appropriate for use in highly turbid and contaminated surface rivers in Colombia, where improvements are expected due to the removal of turbidity, pathogens and to a lesser extent inorganics, organic matter and micro-pollutants. RBF has the potential to mitigate shock loads, thus leading to the prevention of shutdowns of surface water treatment plants. In addition, RBF, as an alternative pretreatment step, may provide an important reduction in chemical consumption, considerably simplifying the operation of the existing treatment processes. However, clogging and self-cleansing issues must be studied deeper in the context of these highly turbid waters to evaluate the potential loss of abstraction capacity yield as well as the development of different redox zones for efficient contaminant removal.

  8. Estimating glomerular filtration rate preoperatively for patients undergoing hepatectomy

    Institute of Scientific and Technical Information of China (English)

    Yoshimi Iwasaki; Tokihiko Sawada; Shozo Mori; Yukihiro Iso; Masato Katoh; Kyu Rokkaku; Junji Kita; Mitsugi Shimoda; Keiichi Kubota

    2009-01-01

    AIM: To compare creatinine clearance (Ccr) with estimated glomerular filtration rate (eGFR) in preoperative renal function tests in patients undergoing hepatectomy. METHODS: The records of 197 patients undergoing hepatectomy between August 2006 and August 2008 were studied, and preoperative Ccr, a three-variable equation for eGFR (eGFR3) and a five-variable equation for eGFR (eGFR5) were calculated. Abnormal values were defined as Ccr < 50 mL/min, eGFR3 and eGFR5 < 60 mL/min per 1.73 m2. The maximum increases in the postoperative serum creatinine (post Cr) level and postoperative rate of increase in the serum Cr level (post Cr rate) were compared. RESULTS: There were 37 patients (18.8%) withabnormal Ccr, 31 (15.7%) with abnormal eGFR3, and 40 (20.3%) with abnormal eGFR5. Although there were no significant differences in the post Cr rate between patients with normal and abnormal Ccr, eGFR3 and eGFR5 values, the post Cr level was significantly higher in patients with eGFR3 and eGFR5 abnormality than in normal patients ( P < 0.0001). Post Cr level tended to be higher in patients with Ccr abnormality ( P = 0.0936 and P = 0.0875, respectively). CONCLUSION: eGFR5 and the simpler eGFR3, rather than Ccr, are recommended as a preoperative renal function test in patients undergoing hepatectomy.

  9. /sup 125/I iothalamate an ideal marker for glomerular filtration

    Energy Technology Data Exchange (ETDEWEB)

    Odlind, B.; Haellgren, R.S.; Sohtell, M.; Lindstroem, B.

    1985-01-01

    The triiodinated angiographic contrast medium, iothalamate (usually labelled /sup 125/I), has been used extensively as a marker for glomerular filtration. The authors have studied the renal handling of /sup 125/I iothalamate (IOT) in vivo and in vitro in several species. In renal cortical slices from chicken, rabbit, rat, and monkey, the tissue-to-medium ratio of IOT was twice that of /sup 51/Cr-EDTA (EDTA) at 37 degrees C; a difference that was abolished at 0 degree C and markedly reduced by added o-iodohippurate or iodipamide. In five chickens the steady-state renal clearance of IOT (CIOT) was twice that of EDTA (CEDTA) or /sup 3/H inulin (C1); a difference that was abolished by administration of 100 mg/kg/hr of novobiocin, an organic anion transport inhibitor. CEDTA was similar to C1 before as well as after transport inhibition. Utilizing the Sperber technique the mean apparent tubular excretion fraction (ATEF) of IOT was 8%, while that of EDTA was 1%. After novobiocin coinfusion (new steady-state) ATEFIOT was significantly reduced and not different from that of EDTA (-1%). In the same animals the total urinary recovery of IOT was 84 and 57% before and after novobiocin, respectively, while corresponding values for EDTA was unchanged by the inhibitor. In seven rats the renal extraction of IOT was reduced from 29 to 17% by coinfusion of probenecid (5 mg/kg/hr). Corresponding extractions were 82 to 34% and 22% (unchanged) for PAH and EDTA, respectively.

  10. SPECTRAL FILTRATION OF IMAGES BY MEANS OF DISPERSIVE SYSTEMS

    Directory of Open Access Journals (Sweden)

    I. M. Gulis

    2016-01-01

    Full Text Available Instruments for spectral filtration of images are an important element of the systems used in remote sensing, medical diagnostics, in-process measurements. The aim of this study is analysis of the functional features and characteristics of the proposed two image monochromator versions which are based on dispersive spectral filtering. The first is based on the use of a dispersive monochromator, where collimating and camera lenses form a telescopic system, the dispersive element of which is within the intermediate image plane. The second version is based on an imaging double monochromator with dispersion subtraction by back propagation. For the telescopic system version, the spectral and spatial resolutions are estimated, the latter being limited by aberrations and diffraction from the entrance slit. The device has been numerically simulated and prototyped. It is shown that for the spectral bandwidth 10 nm (visible spectral range, the aberration-limited spot size is from 10–20 μm at the image center to about 30 μm at the image periphery for the image size 23–27 mm. The monochromator with dispersion subtraction enables one to vary the spectral resolution (up to 1 nm and higher by changing the intermediate slit width. But the distinctive feature is a significant change in the selected central wavelength over the image field. The considered designs of dispersive image monochromators look very promising due to the particular advantages over the systems based on tunable filters as regards the spectral resolution, fast tuning, and the spectral contrast. The monochromator based on a telescopic system has a simple design and a rather large image field but it also has a limited light throughput due to small aperture size. The monochromator with dispersion subtraction has higher light throughput, can provide high spectral resolution when recording a full data cube in a series of measuring acts for different dispersive element positions. 

  11. Removal of selected pharmaceuticals and personal care products (PPCPs) and endocrine-disrupting chemicals (EDCs) during sand filtration and ozonation at a municipal sewage treatment plant.

    Science.gov (United States)

    Nakada, Norihide; Shinohara, Hiroyuki; Murata, Ayako; Kiri, Kentaro; Managaki, Satoshi; Sato, Nobuyuki; Takada, Hideshige

    2007-11-01

    We investigated the efficiencies of removal of 24 pharmaceutically active compounds (PhACs) during sand filtration and ozonation in an operating municipal sewage treatment plant (STP). The target compounds were 2 phenolic antiseptics (thymol, triclosan), 5 acidic analgesics or anti-inflammatories (ibuprofen, naproxen, ketoprofen, fenoprofen, mefenamic acid), 4 amide pharmaceuticals (propyphenazone, crotamiton, carbamazepine, diethyltoluamide), 7 antibiotics (sulfapyridine, sulfamethoxazole, trimethoprim, azithromycin, erythromycin anhydride, clarithromycin, roxithromycin), 3 phenolic endocrine-disrupting chemicals (EDCs) (nonylphenol:NP, octylphenol:OP, bisphenol A:BPA) and 3 natural estrogens (17 beta-estradiol:E2, estrone:E1, estriol:E3). Ozonation removed approximately 80% or more of the phenolic antiseptics, crotamiton, sulfonamide and macrolide antibiotics, and 17 beta-estradiol. Their removal is discussed in terms of chemical structure. The study ascertained the validity of ozonation mechanisms proposed by previous studies in an actually running STP. Compounds with a CC double bond or an aromatic structure with electron donors (e.g., phenol, alkyl, methoxy, or non-protonated amine) were susceptible to ozonation. Compounds with amide structures were resistant. Removal of the PhACs during sand filtration was generally inefficient, probably because of their low hydrophobicities. The combination of ozonation and sand filtration with activated sludge treatment gave efficient removal (>80%) of all the target compounds except carbamazepine and diethyltoluamide. Among all the steps in the plant, ozonation contributed substantially to overall removal of naproxen, ketoprofen, triclosan, crotamiton, sulfapyridine, macrolide antibiotics, and estrone.

  12. STUDY ON FIBROUS COMPOSITES BEHAVIOUR IN HYDRODYNAMIC PROCESS OF WINE FILTRATION

    Directory of Open Access Journals (Sweden)

    Petronela Nechita

    2009-11-01

    Full Text Available This study concerns the implementation and performance evaluation of fibrous composites in sterile filtration of wine. Conditions of preparation were established having in view that the separation of particulate contaminants from liquids by depth filtration is occurring by mechanical entrapment into structural pores and by electrokinetic adsorption, and both retention mechanisms are influenced by various factors. Functional characteristics and behaviour of the filtering composite in industrial filtration of wine were evaluated. It was found that the effectiveness with which micro-organisms were retained was substantially improved by a porous structure characterized by small pores, and respectively by high resistance to air filtration, as well as by a higher content of cationic charges in the system.

  13. Studies on filtration rate in four species of suspension feeding bivalves

    Institute of Scientific and Technical Information of China (English)

    林元烧; 罗文新; 曹文清; 郭东晖; 郑爱榕; 黄长江

    2002-01-01

    The filtration rates of four kinds of bivalves that were cultivated dominantly around Xiamen sea area were measured by using a laboratory flowing system. The experimental results were shown below: (1) Filtration rates were measured in the range of 54~74.8 ml/ (g@min) among the four bivalves, sequencing descently Saccostrea cucullata > Sinonovacula constricta > Mytilus viridis > Ruditapes philippinarum. (2) The relationship between filtration rates on individual size showed a negative exponential function (FR = aWb, FR' = aWb-1), with b - 1 = - 0.435 6 and - 0.392. (3) Filtration rates on Skeletonema costatum were much higher than on Alexandrium tamarensis and Scrippsilla trochoidea inS. Cucullata and R. Philippinarum. (4) FR'on algal densities was also shown a negative function(FR' = aDb-1), with b-1 =-0.143 and-0.215 2 in S.cucullata and R.philippinarum, respectively.

  14. Modeling Non-Fickian Transport and Hyperexponential Deposition for Deep Bed Filtration

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander

    2010-01-01

    An integral model of the deep bed filtration process has been developed. It incorporates pore and particle size distributions, as well as the particle residence time distribution in the framework of the continuous time random walk theory. Numerical modeling is carried out to study the factors...... influencing breakthrough curves and deposition profiles for the deep bed filtration systems. Results are compared with a large set of experimental observations. Our findings show that highly dispersed breakthrough curves, e.g. those with early arrivals and large ending tails, correspond to large dispersion......: particle population in connection with the distribution of the filtration coefficients, heterogeneity in connection with non-Fickian transport, and heterogeneity in connection with the spatial distribution of the filtration coefficients. The influence and interaction of all three mechanisms have been...

  15. The Effect of Ventilation, Filtration and Passive Sorption on Indoor Air Quality in Museum Storage Rooms

    DEFF Research Database (Denmark)

    Ryhl-Svendsen, M.; Clausen, Geo

    2009-01-01

    A study was conducted in five storage rooms at the National Museum of Denmark, in which the effect on indoor air quality of mechanical ventilation, filtration and passive sorption was investigated. Mechanical ventilation and recirculation/filtration was initiated by introducing new ventilation...... and filtration units. Passive sorption was initiated by hanging sheets of sorptive materials oil walls. The control strategies were evaluated in terms of their ability to lower the concentration of internally, generated pollutants, and the indoor-to-outdoor concentration ratio of outdoor pollutants. The overall...... environmental impact for each method was evaluated by the use of material dosimeters. It was found that passive sorption performed better in a small room compared to a large room. Mechanical ventilation and filtration with activated charcoal gave a high protection against ozone, but were less effective...

  16. Stochastic control under progressive enlargement of filtrations and applications to multiple defaults risk management

    CERN Document Server

    Pham, Huyen

    2010-01-01

    We formulate and investigate a general stochastic control problem under a progressive enlargement of filtration. The global information is enlarged from a reference filtration and the knowledge of multiple random times together with associated marks when they occur. By working under a density hypothesis on the conditional joint distribution of the random times and marks, we prove a decomposition of the original stochastic control problem under the global filtration into classical stochastic control problems under the reference filtration, which are determined in a finite backward induction. Our method revisits and extends in particular stochastic control of diffusion processes with finite number of jumps. This study is motivated by optimization problems arising in default risk management, and we provide applications of our decomposition result for the indifference pricing of defaultable claims, and the optimal investment under bilateral counterparty risk. The solutions are expressed in terms of BSDEs involvin...

  17. Evaluating the effectiveness of heat-resistant cast steel filtration from the results of structure examinations

    Directory of Open Access Journals (Sweden)

    Asłanowicz M.

    2007-01-01

    Full Text Available Filtration guarantees castings characterised by high quality and free from any non-metallic inclusions, which are formed at the stage of melting and pouring of liquid metal. This article discusses the problem of the effectiveness of filtration process taking as an example heat-resistant cast steel poured into ceramic moulds. In investigations, foamed zircon filters made by FerroTerm Sp. z o.o. The effectiveness of filtration was described and examined using the results of metallographic examinations, including macro- and micro-structure examinations of metal and of cast metal/ceramic filter interface, and measurements of the content of non-metallic inclusions. The methods of investigations were presented, the obtained results were described, and relevant conclusions were drawn, all of them unmistakably indicating a very beneficial effect that filtration has on molten metal quality. Łódź, Poland, were used.

  18. Paper and board mill effluent treatment with the combined biological-coagulation-filtration pilot scale reactor.

    Science.gov (United States)

    Afzal, Muhammad; Shabir, Ghulam; Hussain, Irshad; Khalid, Zafar M

    2008-10-01

    Pilot scale reactor based on combined biological-coagulation-filtration treatments was designed and evaluated for the treatment of effluent from a paper and board mill. Biological treatment by fed batch reactor (FBR) followed by coagulation and sand filtration (SF) resulted in a total COD and BOD reduction of 93% and 96.5%, respectively. A significant reduction in both COD (90%) and BOD (92%) was also observed by sequencing batch reactor (SBR) process followed by coagulation and filtration. Untreated effluent was found to be toxic, whereas the treated effluents by either of the above two processes were found to be non-toxic when exposed to the fish for 72h. The resultant effluent from FBR-coagulation-sand filtration system meets National Environmental Quality Standards (NEQS) of Pakistan and can be discharged into the environment without any risks.

  19. EFFICACY OF FILTRATION PROCESSES TO OBTAIN WATER CLARITY AT K EAST SPENT NUCLEAR FUEL (SNF) BASIN

    Energy Technology Data Exchange (ETDEWEB)

    DUNCAN JB

    2006-09-28

    The objective is to provide water clarity to the K East Basin via filtration processes. Several activities are planned that will challenge not only the capacity of the existing ion exchange modules to perform as needed but also the current filtration system to maintain water clarity. Among the planned activities are containerization of sludge, removal of debris, and hydrolasing the basin walls to remove contamination.

  20. Relationships between the Processing Parameters of Melt Blown Nonwoven Fabric and Its Structure and Filtration Property

    Institute of Scientific and Technical Information of China (English)

    潘莺; 王善元

    2001-01-01

    Based on the processing experiment and sodium flame test this paper deals with the relationship between processing parameters, structure, and filtration property of melt blown fabric. Through the image analysis of Questar micro-images in combination with the SEM observation and the measurement of some macrostructure indices, the relationship between the processing parameters and the structure especially the microstructure is emphasized Finally the effect of somestructure factors on filtration properties is discussed theoretically.

  1. Fractionnement de protéines du lait par filtration dynamique.

    OpenAIRE

    Espina, V.

    2009-01-01

    This thesis focuses on milk proteins fractionation by dynamic filtration. A two-stage process has been proposed in order to separate milk proteins into three main fractions: casein micelles, α-Lactalbumin and β-Lactoglobulin. The first stage of the process consists in microfiltration of skim milk for separating casein micelles from whey proteins. The performances of two dynamic filtration modules: the Multi Shaft Disk (MSD) module and the rotating disk module have been compared. The results h...

  2. Modeling the filtration of deformable and permeable colloidal particles: the case of casein micelles

    OpenAIRE

    Qu, Peng; Bouchoux, Antoine

    2011-01-01

    When filtrating a colloidal dispersion, colloids accumulate at the membrane surface, thus forming a polarized layer that can ultimately turns into a deposit (= a "gel") in some extreme cases. Modeling such a filtration has always been a challenge. In recent developments, Bacchin et al. propose a model based on the analogy between permeation in a deposit and diffusion in a polarized layer [1]. The permeation flux is then given by the following equation, which is the analog of the classical Dar...

  3. Effect of contact angle on equilibrium saturation during mist filtration in nonwoven and foam media

    OpenAIRE

    Abishek, S.; Mullins, B; King, A.; Kasper, G; Heikamp, W.

    2016-01-01

    Coalescence filtration using knitted, foam or nonwoven fibrous media is the widely applied in the industry for separation and recovery of liquid mists that are generated in many processes, including lubricated machining, compressors and engine crankcases. The dynamics of multi-component/ phase fluid transport and its interaction with the filter surface at the pore-scale and the contact angle dynamics are expected to significantly influence performance and efficiency of filtration processes. M...

  4. A Brief Review of Filtration Studies for Waste Treatment at the Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Richard C.; Schonewill, Philip P.; Shimskey, Rick W.; Peterson, Reid A.

    2010-12-01

    This document completes the requirements of Milestone 1-2, PNNL Draft Literature Review, discussed in the scope of work outlined in the EM-31 Support Project task plan WP-2.3.6-2010-1. The focus of task WP 2.3.6 is to improve the U.S. Department of Energy’s (DOE’s) understanding of filtration operations for high-level waste (HLW) to enhance filtration and cleaning efficiencies, thereby increasing process throughput and reducing the sodium demand (through acid neutralization). Developing the processes for fulfilling the cleaning/backpulsing requirements will result in more efficient operations for both the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and the Savannah River Site (SRS), thereby increasing throughput by limiting cleaning cycles. The purpose of this document is to summarize Pacific Northwest National Laboratory’s (PNNL’s) literature review of historical filtration testing at the laboratory and of testing found in peer-reviewed journals. Eventually, the contents of this document will be merged with a literature review by SRS to produce a summary report for DOE of the results of previous filtration testing at the laboratories and the types of testing that still need to be completed to address the questions about improved filtration performance at WTP and SRS. To this end, this report presents 1) a review of the current state of crossflow filtration knowledge available in the peer-reviewed literature, 2) a detailed review of PNNL-related filtration studies specific to the Hanford site, and 3) an overview of current waste filtration models developed by PNNL and suggested avenues for future model development.

  5. Investigation on Beer Filtration%啤酒过滤性能探讨

    Institute of Scientific and Technical Information of China (English)

    王志坚

    2011-01-01

    影响啤酒过滤的主要因素有过滤前酵母细胞浓度、酒液粘度、固形物含量、稳定剂等;对β-葡聚糖、α-葡聚糖、酵母、颗粒物对啤酒过滤性的影响进行研究分析。改善啤酒过滤性的措施主要有降低麦汁和啤酒中β-葡萄糖的含量,降低过滤前酒液中的酵母细胞数,控制添加剂的添加,添加过滤助剂。%The factors influencing beer filtration included yeast cells concentration for filtration,beer viscosity,solids content,stabilizer etc.The effects of β-dextran,α-dextran,yeast,and granules on beer filtration were investigated.The measures to improve beer filtration included reducing β-dextran content in wort and in beer,reducing yeast cells number in beer before the filtration,proper control of the addition level of additives,and the addition of auxilliary filtration agents.(Tran.by YUE Yang)

  6. Evaluation of particulate filtration efficiency of retrofit particulate filters for light duty vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Van Asch, R.; Verbeek, R.

    2009-10-15

    In the light of the currently running subsidy programme for particulate filters in the Netherlands, the Dutch ministry of spatial planning and environment (VROM) asked TNO to execute a desk study to evaluate the particulates filtration efficiency of retrofit particulate filters for light duty vehicles (passenger cars and vans). The typical retrofit particulate filters for light duty vehicles are also called 'open' or 'half-open' filters, because a part of the exhaust gas can pass through the particulate filter unfiltered. From design point they are very different from the majority of the factory installed particulate filters, which are also called wall-flow or 'closed' particulate filters. Due to these differences there is a large difference in filtration efficiency. Whereas the 'dosed' particulate filters show a filtration efficiency of larger than 90%, the filtration efficiency of 'open' particulate filters is generally lower (type approval minimum 30%), and strongly dependent on the conditions of use. The objective of the current project was to assess the average filtration efficiency of retrofit (open) particulate fillters on light duty vehicles in real world day to day driving, based on available literature data. Also, the reasons of a possible deviation with the type approval test results (minimum filtration efficiency of 30%) was investigated.

  7. Can combining economizers with improved filtration save energy and protect equipment in data centers?

    Energy Technology Data Exchange (ETDEWEB)

    Shehabi, Arman; Ganguly, Srirupa; Gundel, Lara A.; Horvath, Arpad; Kirchstetter, Thomas W.; Lunden, Melissa M.; Tschudi, William; Gadgil, Ashok J.; Nazaroff, William W

    2009-06-05

    Economizer use in data centers is an energy efficiency strategy that could significantly limit electricity demand in this rapidly growing economic sector. Widespread economizer implementation, however, has been hindered by potential equipment reliability concerns associated with exposing information technology equipment to particulate matter of outdoor origin. This study explores the feasibility of using economizers in data centers to save energy while controlling particle concentrations with high-quality air filtration. Physical and chemical properties of indoor and outdoor particles were analyzed at an operating northern California data center equipped with an economizer under varying levels of air filtration efficiency. Results show that when improved filtration is used in combination with an economizer, the indoor/outdoor concentration ratios for most measured particle types were similar to levels when using conventional filtration without economizers. An energy analysis of the data center reveals that, even during the summer months, chiller savings from economizer use greatly outweigh any increase in fan power associated with improved filtration. These findings indicate that economizer use combined with improved filtration could reduce data center energy demand while providing a level of protection from particles of outdoor origin similar to that observed with conventional design.

  8. Development of a Filtration-Based Bioluminescence Assay for Detection of Microorganisms in Tea Beverages.

    Science.gov (United States)

    Shinozaki, Yohei; Igarashi, Toshinori; Harada, Yasuhiro

    2016-03-01

    The market for tea drinks as healthy beverages has been steadily expanding, and ready-to-drink beverages in polyethylene terephthalate bottles have been popular. To more rapidly and accurately test tea beverages bottled in polyethylene terephthalate for microbial contamination, a newly developed filtration device and a washing method with a commercial bioluminescence assay were combined to detect low numbers of bacterial spores, fungal conidia, and ascospores. Washing buffers were formulated with nonionic detergents from the Tween series. Commercially available tea beverages were used to evaluate the filtration capacity of the filtration device, the effect of washing buffers, and the performance of the assay. The assay was tested with serially diluted suspensions of colonies of two bacterial strains, spores of three Bacillus strains, conidia of five fungal strains, and ascospores of four fungal strains. The filtration device enabled filtration of a large sample volume (100 to 500 ml), and the washing buffer significantly decreased the background bioluminescence intensity of tea samples when compared with the no-washing method. Low numbers (1 to 10 CFU/100 ml) of the tested strains of bacteria were detected within 8 to 18 h of cultivation, and fungi were detected within 24 to 48 h. Furthermore, a whole bottle (500 ml) of mixed tea was filtered through the filtration device and microbes were detected. This method could be used for quality control of bottled beverages without preincubation.

  9. Efficient and reusable polyamide-56 nanofiber/nets membrane with bimodal structures for air filtration.

    Science.gov (United States)

    Liu, Bowen; Zhang, Shichao; Wang, Xueli; Yu, Jianyong; Ding, Bin

    2015-11-01

    Nanofibrous media that both possess high airborne particle interception efficiency and robust air permeability would have broad technological implications for areas ranging from individual protection and industrial security to environmental governance; however, creating such filtration media has proved extremely challenging. Here we report a strategy to construct the bio-based polyamide-56 nanofiber/nets (PA-56 NFN) membranes with bimodal structures for effective air filtration via one-step electrospinning/netting. The PA-56 membranes are composed of completely covered two-dimensional (2D) ultrathin (∼20 nm) nanonets which are optimized by facilely regulating the solution concentration, and the bonded scaffold fibers constructed cavity structures which are synchronously created by using the CH3COOH inspiration. With integrated properties of small aperture, high porosity, and bonded scaffold, the resulting PA-56 NFN membranes exhibit high filtration efficiency of 99.995%, low pressure drop of 111 Pa, combined with large dust holding capacity of 49 g/m(2) and dust-cleaning regeneration ability, for filtrating ultrafine airborne particles in the most safe manner involving sieving principle and surface filtration. The successful synthesis of PA-56 NFN medium would not only make it a promising candidate for air filtration, but also provide new insights into the design and development of nanonet-based bimodal structures for various applications.

  10. Mathematical analysis for internal filtration of convection-enhanced high-flux hemodialyzer.

    Science.gov (United States)

    Lee, Jung Chan; Lee, Kyungsoo; Kim, Hee Chan

    2012-10-01

    Structural modifications using a conventional hemodialyzer improved the internal filtration and clearance of middle molecular weight wastes by enhanced convection effect. In this study, we employed a mathematical model describing the internal filtration rate as well as the hemodynamic and hematologic parameters in highflux dialyzer to interpret the previous reported experimental results. Conventional high-flux hemodialysis and convection-enhanced high-flux hemodialysis were configured in the mathematical forms and integrated into the iterative numerical method to predict the internal filtration phenomena inside the dialyzers during dialysis. The distributions of blood pressure, dialysate pressure, oncotic pressure, blood flow rates, dialysate flow rates, local ultrafiltration, hematocrit, protein concentration and blood viscosity along the axial length of dialyzer were calculated in order to estimate the internal filtration volume. The results show that the filtration volumes by internal filtration is two times higher in a convection-enhanced high-flux hemodialyzer than in a conventional high-flux hemodialzer and explains the experimental result of improved clearance of middle molecular size waste in convection-enhanced high-flux hemodialyzer.

  11. Effects of pH value and coagulant dosage on contact filtration of humic substances

    Institute of Scientific and Technical Information of China (English)

    蒋绍阶; 刘宗源; 梁建军

    2009-01-01

    Humic substances (especially fulvic acid (FA)) are the major components of natural organic matter (NOM) that widely exist in drinking water source. Due to their potential effects on public health,the removal of FA was one of the main concerns during the water treatment. Therefore,the contact filtration of FA by using aluminum sulfate as coagulant on the basis of jar tests was carried out. The effects of pH and coagulant dosage on the FA removal and the development of head loss were investigated. The results show that the range of pH value during the FA contact filtration can be effectively influenced by the dosage of aluminum sulfate,and the high aluminum sulfate dosage is an important factor that can result in early filter breakthrough. The FA filtration by deep-bed filtration or by membrane filtration is sometimes disparate under the same coagulation conditions. The choice of aluminum sulfate dosage by the method of membrane filtration,i.e. the "true color measurement",may result in inappropriate filter run,whereas it can be determined with simple jar tests by observing the formation of micro flocs. Considering the effects of pH on aluminum sulfate dosage and FA removal,the optimal pH range of 5.5?6.0 is suggested.

  12. Experimental study on non-woven filamentous fibre micro-filter with high filtration speed.

    Science.gov (United States)

    Niu, Siping; Park, Kisoo; Guerra, Heidi B; Kim, Youngchul

    2015-01-01

    A laboratory study was undertaken to pursue the filter performance of a micro-filter module employing highly porous fibre media under a high filtration rate (≥1,500 m/day), faster than that of any conventional filter process. The effects of filtration rate, head loss, raw water turbidity, and filter aid chemicals on filter performance were analysed. In spite of the extremely high filtration rate, the filter achieved an attractive efficiency, reducing the raw water turbidity by over 80%. As with other filter systems, the filter aid used ((polyaluminium chloride (PAC)) greatly affected the performance of this particular fibre filter. Long-term repetitive runs were additionally carried out to confirm the reproducibility of the filter performance. Also, a comparison was carried out with other high-rate filter systems which are either being tested for use in experimental studies, or are already commercially available. This study reveals that the filter performance under a high filtration speed is still attractive especially as PAC is used. Due to the high porosity of the fibre, the filter had small head loss even though the filtration rate was high. These results ascertain that it is possible to operate the filters with high filtration rate achieving reliable treatment performance.

  13. Magnetic filtration of an iron oxide aerosol by means of magnetizable grates

    Institute of Scientific and Technical Information of China (English)

    A. Alvaro; J.M. Rodríguez; Paulo A. Augusto; A.M. Estévez

    2007-01-01

    The cleaning of gases with low concentrations of small ferromagnetic or paramagnetic particles is a difficult task for conventional filtration. A new alternative procedure, magnetic filtration, is used in this work.Iron oxide aerosol was generated by elutriation of iron oxide particles from a fluidized bed consisting of a mixture of Geldart-C iron oxide powder and large spherical Geldart-B sand particles. The aerosol was filtered by means of a magnetic filter which consisted of one, two or three iron grates staggered to each other. The experimental installation contained also an isokinetic sampling system and a Microtrac SRA 150 Particle Analyser.A theoretical expression for filtration efficiency was deduced from a previous model taking into account the different forces acting on the iron oxide particles. Experimental filtration efficiency matches quite well calculated theoretical efficiency. It was found that an increase in particle size,in the number of grates or in the applied magnetic field produced higher filtration efficiencies up to 100% in some cases. In all filtration experiments pressure drop through the magnetic filter was very small.

  14. Simultaneous reduction of particulate matter and NO(x) emissions using 4-way catalyzed filtration systems.

    Science.gov (United States)

    Swanson, Jacob J; Watts, Winthrop F; Newman, Robert A; Ziebarth, Robin R; Kittelson, David B

    2013-05-07

    The next generation of diesel emission control devices includes 4-way catalyzed filtration systems (4WCFS) consisting of both NOx and diesel particulate matter (DPM) control. A methodology was developed to simultaneously evaluate the NOx and DPM control performance of miniature 4WCFS made from acicular mullite, an advanced ceramic material (ACM), that were challenged with diesel exhaust. The impact of catalyst loading and substrate porosity on catalytic performance of the NOx trap was evaluated. Simultaneously with NOx measurements, the real-time solid particle filtration performance of catalyst-coated standard and high porosity filters was determined for steady-state and regenerative conditions. The use of high porosity ACM 4-way catalyzed filtration systems reduced NOx by 99% and solid and total particulate matter by 95% when averaged over 10 regeneration cycles. A "regeneration cycle" refers to an oxidizing ("lean") exhaust condition followed by a reducing ("rich") exhaust condition resulting in NOx storage and NOx reduction (i.e., trap "regeneration"), respectively. Standard porosity ACM 4-way catalyzed filtration systems reduced NOx by 60-75% and exhibited 99.9% filtration efficiency. The rich/lean cycling used to regenerate the filter had almost no impact on solid particle filtration efficiency but impacted NOx control. Cycling resulted in the formation of very low concentrations of semivolatile nucleation mode particles for some 4WCFS formulations. Overall, 4WCFS show promise for significantly reducing diesel emissions into the atmosphere in a single control device.

  15. Antimicrobial nanoparticle-coated electrostatic air filter with high filtration efficiency and low pressure drop.

    Science.gov (United States)

    Sim, Kyoung Mi; Park, Hyun-Seol; Bae, Gwi-Nam; Jung, Jae Hee

    2015-11-15

    In this study, we demonstrated an antimicrobial nanoparticle-coated electrostatic (ES) air filter. Antimicrobial natural-product Sophora flavescens nanoparticles were produced using an aerosol process, and were continuously deposited onto the surface of air filter media. For the electrostatic activation of the filter medium, a corona discharge electrification system was used before and after antimicrobial treatment of the filter. In the antimicrobial treatment process, the deposition efficiency of S. flavescens nanoparticles on the ES filter was ~12% higher than that on the pristine (Non-ES) filter. In the evaluation of filtration performance using test particles (a nanosized KCl aerosol and submicron-sized Staphylococcus epidermidis bioaerosol), the ES filter showed better filtration efficiency than the Non-ES filter. However, antimicrobial treatment with S. flavescens nanoparticles affected the filtration efficiency of the filter differently depending on the size of the test particles. While the filtration efficiency of the KCl nanoparticles was reduced on the ES filter after the antimicrobial treatment, the filtration efficiency was improved after the recharging process. In summary, we prepared an antimicrobial ES air filter with >99% antimicrobial activity, ~92.5% filtration efficiency (for a 300-nm KCl aerosol), and a ~0.8 mmAq pressure drop (at 13 cm/s). This study provides valuable information for the development of a hybrid air purification system that can serve various functions and be used in an indoor environment.

  16. Proposal for initial collection efficiency models for direct granular upflow filtration

    Directory of Open Access Journals (Sweden)

    Alexandre Botari

    2015-05-01

    Full Text Available Mathematical models of the filtration process are based on the mass balance in the filter bed. Models of the filtration phenomenon describe the mass balance in bed filtration in terms of particle removal mechanisms, and allow for the determination of global particle removal efficiencies. This phenomenon is defined in terms of the geometry and the characteristic elements of granule collectors, particles and fluid, and the composition of the balance of forces that act in the particle collector system. This type of resolution is well known as the trajectory analysis theory. Particle trajectory analysis by mathematical correlation of the dimensionless numbers that represent fluid and particle characteristics is considered the main approach for mathematically modeling the initial collection efficiency of particle removal in water filtration. The existing initial collection efficiency models are designed for downflow filtration. This study analyzes initial collection efficiency models, and proposes an adaptation of these models to direct upflow filtration in a granular bed of coarse sand and gravel, taking into account the contribution of the gravitational factor of the settling removal efficiency in the proposal of initial collection efficiency models.

  17. Can combining economizers with improved filtration save energy and protect equipment in data centers?

    Energy Technology Data Exchange (ETDEWEB)

    Shehabi, Arman; Ganguly, Srirupa; Gundel, Lara A.; Horvath, Arpad; Kirchstetter, Thomas W.; Lunden, Melissa M.; Tschudi, William; Gadgil, Ashok J.; Nazaroff, William W

    2009-06-05

    Economizer use in data centers is an energy efficiency strategy that could significantly limit electricity demand in this rapidly growing economic sector. Widespread economizer implementation, however, has been hindered by potential equipment reliability concerns associated with exposing information technology equipment to particulate matter of outdoor origin. This study explores the feasibility of using economizers in data centers to save energy while controlling particle concentrations with high-quality air filtration. Physical and chemical properties of indoor and outdoor particles were analyzed at an operating northern California data center equipped with an economizer under varying levels of air filtration efficiency. Results show that when improved filtration is used in combination with an economizer, the indoor/outdoor concentration ratios for most measured particle types were similar to levels when using conventional filtration without economizers. An energy analysis of the data center reveals that, even during the summer months, chiller savings from economizer use greatly outweigh any increase in fan power associated with improved filtration. These findings indicate that economizer use combined with improved filtration could reduce data center energy demand while providing a level of protection from particles of outdoor origin similar to that observed with conventional design.

  18. A bubble- and clogging-free microfluidic particle separation platform with multi-filtration.

    Science.gov (United States)

    Cheng, Yinuo; Wang, Yue; Ma, Zengshuai; Wang, Wenhui; Ye, Xiongying

    2016-11-15

    Microfiltration is a compelling method to separate particles based on their distinct size and deformability. However, this approach is prone to clogging after processing a certain number of particles and forming bubbles in the separation procedure, which often leads to malfunctioning of devices. In this work, we report a bubble-free and clogging-free microfluidic particle separation platform with high throughput. The platform features an integrated bidirectional micropump, a hydrophilic microporous filtration membrane and a hydrophobic porous degassing membrane. The bidirectional micropump enables the fluid to flow back and forth repeatedly, which flushes the filtration membrane and clears the filtration micropores for further filtration, and to flow forward to implement multi-filtration. The hydrophobic porous membrane on top of the separation channel removes air bubbles forming in the separation channel, improving the separation efficiency and operational reliability. The microbead mixture and undiluted whole blood were separated using the microfluidic chip. After 5 cycles of reverse flushing and forward re-filtration, a 2857-fold enrichment ratio and an 89.8% recovery rate of 10 μm microbeads were achieved for microbead separation with 99.9% removal efficiency of 2 μm microbeads. After 8 cycles, white blood cells were effectively separated from whole blood with a 396-fold enrichment ratio and a 70.6% recovery rate at a throughput of 39.1 μl min(-1), demonstrating that the platform can potentially be used in biomedical applications.

  19. Filtration treatment of processing kapuas river's water by coral sands/kaolinite/activated carbon

    Science.gov (United States)

    Sasri, Risya; Wahyuni, Nelly; Utomo, Kiki Prio

    2017-03-01

    Filtration treatment of processing Kapuas river's water in the Sepuk Keladi village, West Kalimantan has been conducted. The aims of the treatments to process kapuas river's water with the characteristics of peat into clean water. Processing method using flow-up-flow filtration system with filter media coral sands / kaolinite / activated carbon. Coral sands was obtained from Kijing beach and characterized using X-Ray Diffraction (XRD) and BET method. The XRD spectrum showed strongest peak at 33.09°, 52.40°, 29.34° and it can be concluded that mineral was verified corresponding to calcium consisting of calcite phase. While the result of BET plot point that surface area of coral sands was 4.954 m2/g. The effectiveness of the filtration media was determined by testing parameters such as pH, total suspended solid (TSS), total dissolved solid (TDS), chloride as Cl, and iron as Fe, before and after filtration of Kapuas river's water. The result show that kapuas river's water after filtration treatment was increased pH from 6,53 to 7,2. Filtration using this systems resulted in an average 43,53% reduction in TSS, 91,63% reduction in TDS, 83,63% reduction in content of chloride as Cl and 33,56 % reduction in content iron as Fe, respectively.

  20. Reduction in MRSA environmental contamination with a portable HEPA-filtration unit.

    Science.gov (United States)

    Boswell, T C; Fox, P C

    2006-05-01

    There is renewed interest in the hospital environment as a potentially important factor for cross-infection with methicillin-resistant Staphylococcus aureus (MRSA) and other nosocomial pathogens. The aim of this study was to evaluate the effectiveness of a portable high-efficiency particulate air (HEPA)-filtration unit (IQAir Cleanroom H13, Incen AG, Goldach, Switzerland) at reducing MRSA environmental surface contamination within a clinical setting. The MRSA contamination rate on horizontal surfaces was assessed with agar settle plates in ward side-rooms of three patients who were heavy MRSA dispersers. Contamination rates were measured at different air filtration rates (60-235 m(3)/h) and compared with no air filtration using Poisson regression. Without air filtration, between 80% and 100% of settle plates were positive for MRSA, with the mean number of MRSA colony-forming units (cfu)/10-h exposure/plate ranging from 4.1 to 27.7. Air filtration at a rate of 140 m(3)/h (one patient) and 235 m(3)/h (two patients), resulted in a highly significant decrease in contamination rates compared with no air filtration (adjusted rate ratios 0.037, 0.099 and 0.248, respectively; P contamination within patient isolation rooms, and this may prove to be a useful addition to existing MRSA infection control measures.

  1. Transport of Cryptosporidium oocysts in porous media: Role of straining and physicochemical filtration

    Science.gov (United States)

    Tufenkji, N.; Miller, G.F.; Ryan, J.N.; Harvey, R.W.; Elimelech, M.

    2004-01-01

    The transport and filtration behavior of Cryptosporidium parvum oocysts in columns packed with quartz sand was systematically examined under repulsive electrostatic conditions. An increase in solution ionic strength resulted in greater oocyst deposition rates despite theoretical predictions of a significant electrostatic energy barrier to deposition. Relatively high deposition rates obtained with both oocysts and polystyrene latex particles of comparable size at low ionic strength (1 mM) suggest that a physical mechanism may play a key role in oocyst removal. Supporting experiments conducted with latex particles of varying sizes, under very low ionic strength conditions where physicochemical filtration is negligible, clearly indicated that physical straining is an important capture mechanism. The results of this study indicate that irregularity of sand grain shape (verified by SEM imaging) contributes considerably to the straining potential of the porous medium. Hence, both straining and physicochemical filtration are expected to control the removal of C. parvum oocysts in settings typical of riverbank filtration, soil infiltration, and slow sand filtration. Because classic colloid filtration theory does not account for removal by straining, these observations have important implications with respect to predictions of oocyst transport.

  2. In Vitro Selection of Peanut Somatic Embryos on Medium Containing Culture Filtrate of Sclerotium rolfsii and Plantlet Regeneration

    Directory of Open Access Journals (Sweden)

    YUSNITA

    2005-06-01

    Full Text Available Attempts to identify somaclonal variants of peanut with resistance to Sclerotium stem rot disease due to infection of S. rolfsii were conducted. The objectives of this study were to develop in vitro selection method using culture filtrates of S. rolfsii, identify culture filtrate-insensitive somatic embryo (SE of peanut after in vitro selection and regenerate peanut R0 lines originated from culture filtrate-insensitive SE. To achieve these objectives, peanut embryogenic tissues were cultured on selective medium containing various concentrations of S. rolfsii culture filtrates and sublethal concentration of the filtrates. Medium containing sublethal level of S. rolfsii culture filtrates was used to identify culture filtrate-insensitive SE of peanut. Subsequently, the selected SEs were germinated, plantlets were regenerated and preliminary tested against S. rolfsii. Results of the experiments showed that addition of S. rolfsii culture filtrates into medium for inducing peanut somatic embryos drastically reduced their growth and proliferation. S. rolfsii culture filtrates at 10% concentration has significantly reduced the number of proliferated SE per explant. However, sublethal level was achieved at 30% of culture filtrates concentration. Responses of five peanut cultivars against 30% of culture filtrates were similar, indicating they were similar in their susceptibility against S. rolfsii. A number of culture filtrate-insensitive SE were identified after culturing 1500 clumps of embryogenic tissue of peanut cv. Kelinci for three consecutive passages on medium containing 30% of culture filtrates. Germination of selected SE and regeneration of plantlet from culture filtrate-insensitive SE resulted in 50 peanut R0 lines. These lines have been grown in the plastic house and produced normal seeds for further evaluation. Results of S. rolfsii inoculation indicated the existence of chimera for insensitivity against S. rolfsii.

  3. Assessment of riverbank filtration using selected organic micropollutants

    Science.gov (United States)

    Bichler, Andrea; Bruenjes, Robert; Lange, Frank Thomas; Brauch, Heinz-Juergen; Hofmann, Thilo

    2015-04-01

    Managed riverbank filtration (MRBF) is frequently used as a (pre)treatment step to improve surface water quality for drinking water use. In a managed RBF systems the understanding of flow patterns, mixing processes and groundwater residence times is a key factor to assess the effectiveness of the natural attenuation processes and to secure a good water quality. This study evaluates a suite of organic micropollutants (selected artificial sweeteners, pharmaceuticals and the MRI contrast agent gadolinium) as tracers for river water infiltration into a glaciofluvial aquifer. In particular, the transport behaviour of the selected micropollutants and their suitability to estimate groundwater residence times at a small scale (< 100 m) are assessed. The investigated MRBF system is located in a sub-alpine river valley in a rural catchment and the river permanently infiltrates into the aquifer. The aquifer consists of coarse carbonaceous gravel and is characterized by high permeabilities and groundwater flow velocities. The aquifer thickness reaches values of 16m with a saturated thickness of approximately 6m. The field site was instrumented with ten rhizons (Rhizosphere® microfiltration membrane pore water samplers) along a transect in groundwater flow direction to allow for a high spatial and temporal monitoring resolution. The rhizons were installed beneath the river bed and in the aquifer at different depths (7-13 m) and at different distances (20-60 m) to the river. The selected micropollutants were monitored over a period of ten days, water samples were collected as 12h composite samples. In addition to the selected micropollutants also conventional hydrochemical data and stable water isotopes were analyzed. Radon (²²²Rn) was used as a natural occurring tracer to determine groundwater ages. Based on ²²²Rn measurement the residence times were estimated to be below seven days in the transect. Hydrochemical data indicates that groundwater is recharged exclusively

  4. 压滤式污泥过滤比阻测定方法%Measurement of specific resistance to filtration of sludge by pressure filtration

    Institute of Scientific and Technical Information of China (English)

    赵培涛; 葛仕福; 黄瑛; 陈振乾; 李响

    2011-01-01

    A pressure filtration device was designed based on the principle of mechanical dewatering.A corresponding SRF( specific resistance to filtration) testing model was established. The test results show that SRF Rp measured with pressure filtration method (PFM) has a good consistency with SRF Rv measured with Buchner funnel filtration, whose linear correlation coefficient R2 is 0. 99, the maximum and minimum relative error are 8%, 1.0% respectively, and the average relative error is 5.0%. The porosity of filtrate plate ε does not affect the measurement of SRF, however, the specific resistance Rm(ε) of filtrate plate and filtrate medium decrease with the increasing of filtrate plate porosity ε when ε is less than 4. 0%, while it is constantly equal to the specific resistance Rm(ε) of filtrate medium when ε is greater than 4. 0%. The change of experimental pressure has little effect on the SRF. The optimal experimental pressure is chosen to obtain an appropriate filtrate speed when SRF is measured by PFM. The stability of experimental pressure can be effectively guaranteed by PFM.The accuracy of testing results can be improved by PFM measuring SRF via the piston rod's displacement versus time. Moreover, the sludge dewaterability can be reflected intuitively and qualitatively.%根据污泥机械脱水机理,建立了污泥比阻测试模型,设计了一种压滤式污泥比阻测试装置.结果表明:压滤法测得的污泥比阻Rp与布氏漏斗过滤实验测得的比阻Rv具有较好的一致性,两者线性相关系数R2=0.99,最大相对误差为8.0%,最小相对误差为1.0%,平均相对误差为5.0%;滤板开孔率的大小不会影响污泥比阻的测定,但当开孔率小于4.0%时,过滤介质和滤板的阻抗Rm(ε)随滤板开孔率的增加而减小,开孔率大于4.0%时,Rm(ε)与开孔率无关.分析了布氏漏斗测定污泥比阻时有效面积的影响;压滤式比阻测定仪测定污泥比阻时,实验压力的选取以获得适

  5. Removals of cryptosporidium parvum oocysts and cryptosporidium-sized polystyrene microspheres from swimming pool water by diatomaceous earth filtration and perlite-sand filtration.

    Science.gov (United States)

    Lu, Ping; Amburgey, James E; Hill, Vincent R; Murphy, Jennifer L; Schneeberger, Chandra L; Arrowood, Michael J; Yuan, Tao

    2017-06-01

    Removal of Cryptosporidium-sized microspheres and Cryptosporidium parvum oocysts from swimming pools was investigated using diatomaceous earth (DE) precoat filtration and perlite-sand filtration. In pilot-scale experiments, microsphere removals of up to 2 log were obtained with 0.7 kg·DE/m(2) at a filtration rate of 5 m/h. A slightly higher microsphere removal (2.3 log) was obtained for these DE-precoated filters when the filtration rate was 3.6 m/h. Additionally, pilot-scale perlite-sand filters achieved greater than 2 log removal when at least 0.37 kg/m(2) of perlite was used compared to 0.1-0.4 log removal without perlite both at a surface loading rate of 37 m/h. Full-scale testing achieved 2.7 log of microspheres and oocysts removal when 0.7 kg·DE/m(2) was used at 3.6 m/h. Removals were significantly decreased by a 15-minute interruption of the flow (without any mechanical agitation) to the DE filter in pilot-scale studies, which was not observed in full-scale filters. Microsphere removals were 2.7 log by perlite-sand filtration in a full-scale swimming pool filter operated at 34 m/h with 0.5 kg/m(2) of perlite. The results demonstrate that either a DE precoat filter or a perlite-sand filter can improve the efficiency of removal of microspheres and oocysts from swimming pools over a standard sand filter under the conditions studied.

  6. Modeling of Filtration Processes—Microfiltration and Depth Filtration for Harvest of a Therapeutic Protein Expressed in Pichia pastoris at Constant Pressure

    Directory of Open Access Journals (Sweden)

    Muthukumar Sampath

    2014-12-01

    Full Text Available Filtration steps are ubiquitous in biotech processes due to the simplicity of operation, ease of scalability and the myriad of operations that they can be used for. Microfiltration, depth filtration, ultrafiltration and diafiltration are some of the most commonly used biotech unit operations. For clean feed streams, when fouling is minimal, scaling of these unit operations is performed linearly based on the filter area per unit volume of feed stream. However, for cases when considerable fouling occurs, such as the case of harvesting a therapeutic product expressed in Pichia pastoris, linear scaling may not be possible and current industrial practices involve use of 20–30% excess filter area over and above the calculated filter area to account for the uncertainty in scaling. In view of the fact that filters used for harvest are likely to have a very limited lifetime, this oversizing of the filters can add considerable cost of goods for the manufacturer. Modeling offers a way out of this conundrum. In this paper, we examine feasibility of using the various proposed models for filtration of a therapeutic product expressed in Pichia pastoris at constant pressure. It is observed that none of the individual models yield a satisfactory fit of the data, thus indicating that more than one fouling mechanism is at work. Filters with smaller pores were found to undergo fouling via complete pore blocking followed by cake filtration. On the other hand, filters with larger pores were found to undergo fouling via intermediate pore blocking followed by cake filtration. The proposed approach can be used for more accurate sizing of microfilters and depth filters.

  7. Applicability of estimating glomerular filtration rate equations in pediatric patients: comparison with a measured glomerular filtration rate by iohexol clearance.

    Science.gov (United States)

    Deng, Fang; Finer, Gal; Haymond, Shannon; Brooks, Ellen; Langman, Craig B

    2015-03-01

    Estimating glomerular filtration rate (eGFR) has become popular in clinical medicine as an alternative to measured GFR (mGFR), but there are few studies comparing them in clinical practice. We determined mGFR by iohexol clearance in 81 consecutive children in routine practice and calculated eGFR from 14 standard equations using serum creatinine, cystatin C, and urea nitrogen that were collected at the time of the mGFR procedure. Nonparametric Wilcoxon test, Spearman correlation, Bland-Altman analysis, bias (median difference), and accuracy (P15, P30) were used to compare mGFR with eGFR. For the entire study group, the mGFR was 77.9 ± 38.8 mL/min/1.73 m(2). Eight of the 14 estimating equations demonstrated values without a significant difference from the mGFR value and demonstrated a lower bias in Bland-Altman analysis. Three of these 8 equations based on a combination of creatinine and cystatin C (Schwartz et al. New equations to estimate GFR in children with CKD. J Am Soc Nephrol 2009;20:629-37; Schwartz et al. Improved equations estimating GFR in children with chronic kidney disease using an immunonephelometric determination of cystatin C. Kidney Int 2012;82:445-53; Chehade et al. New combined serum creatinine and cystatin C quadratic formula for GFR assessment in children. Clin J Am Soc Nephrol 2014;9:54-63) had the highest accuracy with approximately 60% of P15 and 80% of P30. In 10 patients with a single kidney, 7 with kidney transplant, and 11 additional children with short stature, values of the 3 equations had low bias and no significant difference when compared with mGFR. In conclusion, the 3 equations that used cystatin C, creatinine, and growth parameters performed in a superior manner over univariate equations based on either creatinine or cystatin C and also had good applicability in specific pediatric patients with single kidneys, those with a kidney transplant, and short stature. Thus, we suggest that eGFR calculations in pediatric clinical practice

  8. Noncausal two-stage image filtration at presence of observations with anomalous errors

    Directory of Open Access Journals (Sweden)

    S. V. Vishnevyy

    2013-04-01

    Full Text Available Introduction. It is necessary to develop adaptive algorithms, which allow to detect such regions and to apply filter with respective parameters for suppression of anomalous noises for the purposes of image filtration, which consist of regions with anomalous errors. Development of adaptive algorithm for non-causal two-stage images filtration at pres-ence of observations with anomalous errors. The adaptive algorithm for noncausal two-stage filtration is developed. On the first stage the adaptive one-dimensional algorithm for causal filtration is used for independent processing along rows and columns of image. On the second stage the obtained data are united and a posteriori estimations are calculated. Results of experimental investigations. The developed adaptive algorithm for noncausal images filtration at presence of observations with anomalous errors is investigated on the model sample by means of statistical modeling on PC. The image is modeled as a realization of Gaussian-Markov random field. The modeled image is corrupted with uncorrelated Gaussian noise. Regions of image with anomalous errors are corrupted with uncorrelated Gaussian noise which has higher power than normal noise on the rest part of the image. Conclusions. The analysis of adaptive algorithm for noncausal two-stage filtration is done. The characteristics of accuracy of computed estimations are shown. The comparisons of first stage and second stage of the developed adaptive algorithm are done. Adaptive algorithm is compared with known uniform two-stage algorithm of image filtration. According to the obtained results the uniform algorithm does not suppress anomalous noise meanwhile the adaptive algorithm shows good results.

  9. A general approach for predicting the filtration of soft and permeable colloids: the milk example.

    Science.gov (United States)

    Bouchoux, Antoine; Qu, Peng; Bacchin, Patrice; Gésan-Guiziou, Geneviève

    2014-01-14

    Membrane filtration operations (ultra-, microfiltration) are now extensively used for concentrating or separating an ever-growing variety of colloidal dispersions. However, the phenomena that determine the efficiency of these operations are not yet fully understood. This is especially the case when dealing with colloids that are soft, deformable, and permeable. In this paper, we propose a methodology for building a model that is able to predict the performance (flux, concentration profiles) of the filtration of such objects in relation with the operating conditions. This is done by focusing on the case of milk filtration, all experiments being performed with dispersions of milk casein micelles, which are sort of ″natural″ colloidal microgels. Using this example, we develop the general idea that a filtration model can always be built for a given colloidal dispersion as long as this dispersion has been characterized in terms of osmotic pressure Π and hydraulic permeability k. For soft and permeable colloids, the major issue is that the permeability k cannot be assessed in a trivial way like in the case for hard-sphere colloids. To get around this difficulty, we follow two distinct approaches to actually measure k: a direct approach, involving osmotic stress experiments, and a reverse-calculation approach, that consists of estimating k through well-controlled filtration experiments. The resulting filtration model is then validated against experimental measurements obtained from combined milk filtration/SAXS experiments. We also give precise examples of how the model can be used, as well as a brief discussion on the possible universality of the approach presented here.

  10. Comparison of nonwoven fiberglass and stainless steel microfiber media in aerosol coalescence filtration

    Science.gov (United States)

    Manzo, Gabriel

    Coalescing filters are used to remove small liquid droplets from air streams. They have numerous industrial applications including dehumidification, cabin air filtration, compressed air filtration, metal working, CCV, and agriculture. In compressed air systems, oils used for lubrication of compressor parts can aerosolize into the main air stream causing potential contamination concerns for downstream applications. In many systems, humid air can present problems to sensitive equipment and sensors. As the humid air cools, small water drops condense and can disrupt components that need to be kept dry. Fibrous nonwoven filter media are commonly used to coalesce small drops into larger drops for easier removal. The coalescing performance of a medium is dependent upon several parameters including permeability, porosity, and wettability. In many coalescing filters, glass fibers are used. In this work, the properties of steel fiber media are measured to see how these properties compare to glass fiber media. Steel fiber media has different permeability, porosity and wettability to oil and water than fiber glass media. These differences can impact coalescence performance. The impact of these differences in properties on coalescence filtration performance was evaluated in a coalescence test apparatus. The overall coalescence performance of the steel and glass nonwoven fiber media are compared using a filtration efficiency and filtration index. In many cases, the stainless steel media performed comparably to fiber glass media with efficiencies near 90%. Since stainless steel media had lower pressure drops than fiber glass media, its filtration index values were significantly higher. Broader impact of this work is the use of stainless steel fiber media as an alternative to fiber glass media in applications where aerosol filtration is needed to protect the environment or sensitive equipment and sensors.

  11. Chest CT using spectral filtration: radiation dose, image quality, and spectrum of clinical utility

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Franziska M.; Johnson, Thorsten R.C.; Sommer, Wieland H.; Thierfelder, Kolja M.; Meinel, Felix G. [University Hospital Munich, Institute for Clinical Radiology, Munich (Germany)

    2015-06-01

    To determine the radiation dose, image quality, and clinical utility of non-enhanced chest CT with spectral filtration. We retrospectively analysed 25 non-contrast chest CT examinations acquired with spectral filtration (tin-filtered Sn100 kVp spectrum) compared to 25 examinations acquired without spectral filtration (120 kV). Radiation metrics were compared. Image noise was measured. Contrast-to-noise-ratio (CNR) and figure-of-merit (FOM) were calculated. Diagnostic confidence for the assessment of various thoracic pathologies was rated by two independent readers. Effective chest diameters were comparable between groups (P = 0.613). In spectral filtration CT, median CTDI{sub vol}, DLP, and size-specific dose estimate (SSDE) were reduced (0.46 vs. 4.3 mGy, 16 vs. 141 mGy*cm, and 0.65 vs. 5.9 mGy, all P < 0.001). Spectral filtration CT had higher image noise (21.3 vs. 13.2 HU, P < 0.001) and lower CNR (47.2 vs. 75.3, P < 0.001), but was more dose-efficient (FOM 10,659 vs. 2,231/mSv, P < 0.001). Diagnostic confidence for parenchymal lung disease and osseous pathologies was lower with spectral filtration CT, but no significant difference was found for pleural pathologies, pulmonary nodules, or pneumonia. Non-contrast chest CT using spectral filtration appears to be sufficient for the assessment of a considerable spectrum of thoracic pathologies, while providing superior dose efficiency, allowing for substantial radiation dose reduction. (orig.)

  12. Denoising of 4D cardiac micro-CT data using median-centric bilateral filtration

    Science.gov (United States)

    Clark, D.; Johnson, G. A.; Badea, C. T.

    2012-02-01

    Bilateral filtration has proven an effective tool for denoising CT data. The classic filter uses Gaussian domain and range weighting functions in 2D. More recently, other distributions have yielded more accurate results in specific applications, and the bilateral filtration framework has been extended to higher dimensions. In this study, brute-force optimization is employed to evaluate the use of several alternative distributions for both domain and range weighting: Andrew's Sine Wave, El Fallah Ford, Gaussian, Flat, Lorentzian, Huber's Minimax, Tukey's Bi-weight, and Cosine. Two variations on the classic bilateral filter, which use median filtration to reduce bias in range weights, are also investigated: median-centric and hybrid bilateral filtration. Using the 4D MOBY mouse phantom reconstructed with noise (stdev. ~ 65 HU), hybrid bilateral filtration, a combination of the classic and median-centric filters, with Flat domain and range weighting is shown to provide optimal denoising results (PSNRs: 31.69, classic; 31.58 median-centric; 32.25, hybrid). To validate these phantom studies, the optimal filters are also applied to in vivo, 4D cardiac micro-CT data acquired in the mouse. In a constant region of the left ventricle, hybrid bilateral filtration with Flat domain and range weighting is shown to provide optimal smoothing (stdev: original, 72.2 HU; classic, 20.3 HU; median-centric, 24.1 HU; hybrid, 15.9 HU). While the optimal results were obtained using 4D filtration, the 3D hybrid filter is ultimately recommended for denoising 4D cardiac micro-CT data, because it is more computationally tractable and less prone to artifacts (MOBY PSNR: 32.05; left ventricle stdev: 20.5 HU).

  13. 过滤方式及压力对速率影响的研究%The Research on the Impact of Filtration Manners and Pressure on Filtration Rate

    Institute of Scientific and Technical Information of China (English)

    杨德武; 王海艳

    2012-01-01

    The advantages and disadvantages of relevant filtrations are introduced.Filtration experiment process is established independently and a corresponding membrane filter is designed to study the horizontal dead-end filtration,vertical dead-end filtration,horizontal cross-flow filtration and vertical cross-flow filtration and operating pressure impacting on the filtration rate.Experimen-tal results show that the filtration rate of vertical cross-flow filtration is larger and the rate attenua-tion is slower than other three filtration manners.After a period of time,the filtration rate tend to a definite value;The filtration rate is improved by increasing pressure,but membrane fouling and the rate attenuation is accelerated.%介绍了相关过滤方式的优缺点,自主建立了过滤实验流程,设计出相应的膜滤器,通过实验,研究了横向终端过滤、竖向终端过滤、横向错流过滤和竖向错流过滤及过滤压力对过滤速率的影响等。结果表明:采用竖向流动错流过滤方式膜过滤速率大于其它方式的过滤速率,衰减最为缓慢,且一段时间后,速率趋于一定值;压力增大可以提高竖向流动错流过滤速率,但也加快了膜污染,使膜速率衰减加快。

  14. Presence of an adsorbent cake layer improves the performance of gravity-driven membrane (GDM) filtration system.

    Science.gov (United States)

    Shao, Senlin; Feng, Yijing; Yu, Huarong; Li, Jiangyun; Li, Guibai; Liang, Heng

    2017-01-01

    Gravity-driven membrane (GDM) filtration is a promising decentralized drinking water treatment process. To improve the performance of GDM system, a thin layer of adsorbent was pre-deposited on the membrane surface prior to filtration (adsorbent-laden GDM system). The tested adsorbents include powdered activated carbon (PAC) and anion exchange resin (AER), and an unmodified GDM system and a SiO2-laden GDM system were used as controls. In the adsorbent-laden GDM systems, the adsorption of the PAC and AER increased the removal efficiency of natural organic matter by 7.2-43.5% and microcystin-LR, atrazine, and bisphenol A by 7.9-81.2%. The presence of adsorbent particles increased the amount of microorganisms in the cake layer and therefore increased the removal efficiency of assimilable organic matter (AOC) by 20.1-34.4%. In the adsorbent-laden GDM systems, the physically irrecoverable fouling decreased because of the reduction in membrane foulants by the adsorbent layer. However, the presence of adsorbent particles in the cake layer counteracted this effect and increased the physically recoverable fouling. Consequently, the pre-deposited adsorbent layers had only a limited effect on the stabilized flux (2.26-2.65 L/m(2) h). A bilayer structure was found in the cake layer of the adsorbent-laden GDM systems via scanning electron microscopy (SEM), and the cake layer was looser in the presence of adsorbent particles. These results demonstrate that pre-depositing a thin layer of adsorbents on the membrane surface of the GDM system can significantly improve the quality of the permeate without decreasing the stabilized flux. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Hierarchically structured polysulfone/titania fibrous membranes with enhanced air filtration performance.

    Science.gov (United States)

    Wan, Huigao; Wang, Na; Yang, Jianmao; Si, Yinsong; Chen, Kun; Ding, Bin; Sun, Gang; El-Newehy, Mohamed; Al-Deyab, Salem S; Yu, Jianyong

    2014-03-01

    Hierarchically structured, superhydrophobic filter medium exhibiting robust filtration performance to airborne particulate were prepared by a facile deposition of electrospun polysulfone/titania nanoparticles (PSU/TiO2 NPs) on a conventional nonwoven substrate. The air permeability, tensile strength and abrasion resistance of pristine PSU fibrous membranes could be finely controlled by regulating the solvent composition and number ratios of jets. By employing the TiO2 NPs incorporation, the pristine PSU fibers were endowed with promising superhydrophobicity with a water contact angle of up to 152°. The quantitative hierarchical roughness analysis using N2 adsorption method has confirmed the major contribution of TiO2 NPs on enhancing the porous structure and surface fractal features with irregular rough structure. Filtration performance studies have revealed that the filtration efficiency and pressure drop of resultant hybrid membranes could be manipulated by tuning the surface composition as well as the hierarchical structures. Furthermore, the as-prepared PSU/TiO2-5 membrane exhibited improved filtration efficiency (99.997%) and pressure drop (45.3 Pa) compared with pristine PSU membrane, which would make them a promising media for fine particle filtration, and a new insight was also provided into the design and development of high performance filter medium based on hierarchical structured fibers.

  16. Optimization of biomolecule separation by combining microscale filtration and design-of-experiment methods.

    Science.gov (United States)

    Kazemi, Amir S; Kawka, Karina; Latulippe, David R

    2016-10-01

    There is considerable interest in developing microscale (i.e., high-throughput) methods that enable multiple filtration experiments to be run in parallel with smaller sample amounts and thus reduce the overall required time and associated cost to run the filtration tests. Previous studies to date have focused on simply evaluating the filtration capacity, not the separation performance. In this work, the stirred-well filtration (SWF) method was used in combination with design-of-experiment (DOE) methods to optimize the separation performance for three binary mixtures of bio-molecules: protein-protein, protein-polysaccharide, and protein-DNA. Using the parallel based format of the SWF method, eight constant-flux ultrafiltration experiments were conducted at once to study the effects of stirring conditions, permeate flux, and/or solution conditions (pH, ionic strength). Four separate filtration tests were conducted for each combination of process variables; in total, over 100 separate tests were conducted. The sieving coefficient and selectivity results are presented to match the DOE design format and enable a greater understanding of the effects of the different process variables that were studied. The method described herein can be used to rapidly determine the optimal combination of process factors that give the best separation performance for a range of membrane-based separations applications and thus obviate the need to run a large number of traditional lab-scale tests. Biotechnol. Bioeng. 2016;113: 2131-2139. © 2016 Wiley Periodicals, Inc.

  17. Effect of filtration rate on coal-sand dual-media filter performances for microalgae removal.

    Science.gov (United States)

    Sabiri, Nour-Eddine; Monnier, Elodie; Raimbault, Virginie; Massé, Anthony; Séchet, Véronique; Jaouen, Pascal

    2017-02-01

    This study tested the efficiency of granular filtration using a bilayer sand filter for microalgae removal from culture dilutions ranging from 10,000 to 17,000 cells/mL. The objective is to evaluate the removal capacity of the filter without chemical coagulation. Two filter media, sand and anthracite, with mean grain sizes of 0.395 and 1.2 mm, respectively, were used in constant-flow-rate experiments (down-flow mode) with suspensions containing Heterocapsa triquetra microalga. The conventional rapid filtration which usually operates at a constant rate of approximately 5 m(3)/m(2) h is compared to high-rate filtration. Two filtration velocities (5 and 10 m/h) were investigated with bed depth of 1100 mm. Average microalgal cell removal rates were 90% at 5 m/h and 68% at 10 m/h. Turbidity removal was more than 71% at 5 m/h but just 57% at 10 m/h. Head losses did not increase significantly, and values measured at process end were 32 mbar at 5 m/h and 78 mbar at 10 m/h. Retention probabilities were calculated from experimental data. A theoretical model was used to evaluate the contributions of the different drivers of microalgae removal. Hypotheses are developed on the understanding of change in the mechanisms of retention as a function of filtration velocity.

  18. Experimental prestorage filtration removes antibodies and decreases lipids in RBC supernatants mitigating TRALI in vivo.

    Science.gov (United States)

    Silliman, Christopher C; Kelher, Marguerite R; Khan, Samina Y; LaSarre, Monica; West, F Bernadette; Land, Kevin J; Mish, Barbara; Ceriano, Linda; Sowemimo-Coker, Samuel

    2014-05-29

    Transfusion-related acute lung injury (TRALI) remains a significant cause of transfusion-related mortality with red cell transfusion. We hypothesize that prestorage filtration may reduce proinflammatory activity in the red blood cell (RBC) supernatant and prevent TRALI. Filters were manufactured for both small volumes and RBC units. Plasma containing antibodies to human lymphocyte antigen (HLA)-A2 or human neutrophil antigen (HNA)-3a was filtered, and immunoglobulins and specific HNA-3a and HLA-2a neutrophil (PMN) priming activity were measured. Antibodies to OX27 were added to plasma, and filtration was evaluated in a 2-event animal model of TRALI. RBC units from 31 donors known to have antibodies against HLA antigens and from 16 antibody-negative controls were filtered. Furthermore, 4 RBC units were drawn and underwent standard leukoreduction. Immunoglobulins, HLA antibodies, PMN priming activity, and the ability to induce TRALI in an animal model were measured. Small-volume filtration of plasma removed >96% of IgG, antibodies to HLA-A2 and HNA-3a, and their respective priming activity, as well as mitigating antibody-mediated in vivo TRALI. In RBC units, experimental filtration removed antibodies to HLA antigens and inhibited the accumulation of lipid priming activity and lipid-mediated TRALI. We conclude that filtration removes proinflammatory activity and the ability to induce TRALI from RBCs and may represent a TRALI mitigation step.

  19. An evaluation of the filtration performance of paediatric breathing system filters at low flows.

    Science.gov (United States)

    Malan, C A; Wilkes, A R; Hall, J E; Gildersleve, C

    2007-05-01

    The filtration performance of five different types of filter intended for use in paediatric anaesthesia was measured. A total of 120 unused filters (24 samples of each filter type) were evaluated. The pressure drop and filtration performance, using challenges of sodium chloride particles, were measured for each filter at 3 l min(-1) and 15 l min(-1). The pressure drop was less at the lower flow; there was a wide variation in the pressure drop across some filters. The filtration performance of all filter types showed an improvement at 3 l min(-1) compared to 15 l min(-1). Four filter types had filtration efficiencies greater than 95% at 15 l min(-1) and greater than 99% at 3 l min(-1). The remaining filter type had a filtration efficiency less than 90% at 15 l min(-1) and greater than 95% at 3 l min(-1). These levels of performance are comparable to that of breathing system filters intended for use in adult anaesthesia using flows representing mean inspiratory flow.

  20. The effect of membrane filtration artifacts on dissolved trace element concentrations

    Science.gov (United States)

    Horowitz, A.J.; Elrick, K.A.; Colberg, M.R.

    1992-01-01

    Among environment scientists, the current and almost universally accepted definition of dissolved constituents is an operational one only those materials which pass through a 0.45-??m membrane filter are considered to be dissolved. Detailed laboratory and field studies on Fe and Al indicate that a number of factors associated with filtration, other than just pore size, can substantially alter 'dissolved' trace element concentrations; these include: filter type, filter diameter, filtration method, volume of sample processed, suspended sediment concentration, suspended sediment grain-size distribution, concentration of colloids and colloidally-associated trace elements and concentration of organic matter. As such, reported filtered-water concentrations employing the same pore size filter may not be equal. Filtration artifacts may lead to the production of chemical data that indicate seasonal or annual 'dissolved' chemical trends which do not reflect actual environmental conditions. Further, the development of worldwide averages for various dissolved chemical constituents, the quantification of geochemical cycles, and the determination of short- or long-term environmental chemical trends may be subject to substantial errors, due to filtration artifacts, when data from the same or multiple sources are combined. Finally, filtration effects could have a substantial impact on various regulatory requirements.

  1. Filtration of bioaerosols using a granular metallic filter with micrometer-sized collectors

    Energy Technology Data Exchange (ETDEWEB)

    Damit, Brian E [ORNL; Bischoff, Brian L [ORNL; Phelps, Tommy Joe [ORNL; Wu, Dr. Chang-Yu [University of Florida, Gainesville; Cheng, Mengdawn [ORNL

    2014-01-01

    Several experimental studies with granular bed filters composed of micrometer-sized spherical or sintered metallic granules have demonstrated their use in aerosol filtration. However, the effectiveness of these metallic membrane filters against bioaerosols has not been established. In this work, the filtration efficiency and filter quality of these filters against airborne B. subtilis endospore and MS2 virus were determined as a function of face velocity and loading time. In experiments, a physical removal efficiency greater than 99.9% and a viable removal efficiency of greater than 5-log were observed for both bacterial spore and viral aerosols. A lower face velocity produced both higher collection efficiency and filter quality for virus but was not statistically significant for spore filtration. Although the filter had high filtration efficiency of the test bioaerosols, the filter's high pressure drop resulted in a low filter quality (0.25-0.75 kPa- 1). Overall, filters with micrometer-sized collectors capture bioaerosols effectively but their applications in aerosol filtration may be limited by their high pressure drop.

  2. Impacts of Coagulation Pretreatment on MF Filtration and a Comparative Study of Different Membrane Module Types

    Institute of Scientific and Technical Information of China (English)

    LIU Qi-feng; Kim Seung-hyun; Yun Jong-sup; Moon Seong-yong

    2006-01-01

    Changes in the regulatory requirements and the forthcoming Disinfectant/Disinfection By-Products (D/DBP)Rule will require that drinking water treatment facilities be operated to achieve maximum removals of particles and disinfectant tolerant microorganisms as well as natural organic matter (NOM). For drinking water production, the use of membrane filtration processes such as microfiltration and ultrafiltration (MF/UF) alone to satisfy the turbidity, particle and microorganism removal a requirement of the surface water treatment regulation (SWTR) is not enough. MF/UF treatment processes can achieve only nominal (10 percent) removal of disinfection by-products (DBP) precursors (James, et al., 1995). On the other hand, too fast fouling can make the filtration processes more difficult to carry on. To solve these problems, many authors have been interested in installing coagulation pretreatment before membrane filtration to improve membrane performance. However, previous studies reported conflicting results. Some supported the effectiveness of coagulation pretreatment, while others contended that coagulation aggravated membrane performance. This research aims to identify the effects of coagulation pretreatment on membrane filtration through a pilot study using PVDF membrane in combination with analyzing the rationale of coagulation. Another objective of this research was to evaluate the different impacts on membrane performance of using different membrane modules (the submerged module and pressured module). The results showed that coagulation pretreatment greatly improved the membrane performance, extending the filtration time as well as reducing the permeated organic level, and that the submerged module is much more efficient than the pressured module.

  3. Estimation of single-kidney glomerular filtration rate without exogenous contrast agent.

    Science.gov (United States)

    He, Xiang; Aghayev, Ayaz; Gumus, Serter; Ty Bae, K

    2014-01-01

    Measurement of single-kidney filtration fraction and glomerular filtration rate (GFR) without exogenous contrast is clinically important to assess renal function and pathophysiology, especially for patients with comprised renal function. The objective of this study is to develop a novel MR-based tool for noninvasive quantification of renal function using conventional MR arterial spin labeling water as endogenous tracer. The regional differentiation of the arterial spin labeling water between the glomerular capsular space and the renal parenchyma was characterized and measured according to their MR relaxation properties (T1ρ or T2 ), and applied to the estimation of filtration fraction and single-kidney GFR. The proposed approach was tested to quantify GFR in healthy volunteers at baseline and after a protein-loading challenge. Biexponential decay of the cortical arterial spin labeling water MR signal was observed. The major component decays the same as parenchyma water; the minor component decays much slower as expected from glomerular ultra-filtrates. The mean single-kidney GFR was estimated to be 49 ± 9 mL/min at baseline and increased by 28% after a protein-loading challenge. We developed an arterial spin labeling-based MR imaging method that allows us to estimate renal filtration fraction and singe-kidney GFR without use of exogenous contrast. Copyright © 2013 Wiley Periodicals, Inc.

  4. Particle contamination of parenteralia and in-line filtration of proteinaceous drugs.

    Science.gov (United States)

    Werner, Benjamin Patrick; Winter, Gerhard

    2015-12-30

    Protein drug products play an important role in the treatment of severe diseases. However, due to the instability of these complex molecules, protein aggregates can form which can compromise drug safety and efficacy including immunogenic reactions. In-line filtration during the administration of these drugs can serve as a final safeguarding step to protect patients from risks associated with proteinaceous particles. A unique analysis of more than 300 marketed protein drug products revealed that already around 16% of all these products are filtered during preparation or administration. Further, the research revealed that no standardized filtration practice exists. Broad variances regarding filter membrane or pore size are found and sometimes no specifications are mentioned at all. The benefits as well as possible negative impacts of filtration like filter shedding, extractables or drug adsorption are critically assessed. Several proposals to improve the current filtration practice and to expand the number of in-line filtered protein drug products are made. The suggestions include the demand for the specific usage of one filter membrane type, the establishment of a filtration routine for unfiltered protein drugs and a statistical analysis between filtered and non-filtered products with similar formulations to identify possible differences in the immunogenicity rate.

  5. Effect of filtration on rolling-element-bearing life in contaminated lubricant environment

    Science.gov (United States)

    Loewenthal, S. H.; Moyer, D. W.; Sherlock, J. J.

    1978-01-01

    Fatigue tests were conducted on groups of 65 millimeter-bore ball bearings under four levels of filtration with and without a contaminated MIL-L-23699 lubricant. The baseline series used noncontaminated oil with 49 micron absolute filtration. In the remaining tests contaminants of the composition found in aircraft engine filters were injected into the filter's supply line at a constant rate of 125 milligrams per bearing-hour. The test filters had absolute particle removal ratings of 3, 30, 49, and 105 microns (0.45, 10, 30, and 70 microns nominal), respectively. Bearings were tested at 15,000 rpm under 4580 newtons radial load. Bearing life and running tract condition generally improved with finer filtration. The 3 and 30 micron filter bearings in a contaminated lubricant had statistically equivalent lives, approaching those from the baseline tests. The experimental lives of 49 micron bearings were approximately half the baseline bearing's lives. Bearings tested with the 105 micron filter experienced wear failures. The degree of surface distress, weight loss, and probable failure mode were found to be dependent on filtration level, with finer filtration being clearly beneficial.

  6. Membrane fouling and dialysate flow pattern in an internal filtration-enhancing dialyzer.

    Science.gov (United States)

    Yamamoto, Ken-ichiro; Hiwatari, Michihito; Kohori, Fukashi; Sakai, Kiyotaka; Fukuda, Makoto; Hiyoshi, Tatsuo

    2005-01-01

    For efficient removal of large molecular weight solutes by dialysis, several types of internal filtration-enhancing dialyzers (IFEDs) are commercially available. However, in a pressure-driven membrane separation process (i.e., filtration), membrane fouling caused by adhesion of plasma proteins is a severe problem. The objective of the present study is to investigate the effects of internal filtration on membrane fouling based on the membrane's pure-water permeability, diffusive permeability, and sieving coefficient. Hemodialysis experiments were performed with two different dialyzers, IFEDs and non-IFEDs. Local membrane fouling in each dialyzer was evaluated by measuring the pure-water permeability, the diffusive permeability, and the sieving coefficient of native membranes and membranes treated with bovine blood. The effects of packing ratio on dialysate flow pattern were also evaluated by measuring the time required for an ion tracer to reach electrodes placed in the dialyzers. In the IFED, membrane fouling caused by protein adhesion is increased because of enhanced internal filtration only at the early stage of dialysis, and this fouling tends to occur only near the dialysate outlet port. However, enhanced internal filtration has little effect on measured membrane transfer parameters.

  7. Chitosan and metal salt coagulant impacts on Cryptosporidium and microsphere removal by filtration.

    Science.gov (United States)

    Brown, Trevor J; Emelko, Monica B

    2009-02-01

    Maintenance of appropriate chemical pretreatment is a critical component of ensuring proper filtration performance. Pilot-scale in-line filtration studies were performed to investigate the relative impacts of chitosan, alum, and FeCl(3) coagulation on the removal of Cryptosporidium parvum oocysts and oocyst-sized polystyrene microspheres by granular media filtration. Similar removals of oocysts and microspheres were achieved when optimal coagulant doses were utilized. Sub-optimal alum and FeCl(3) coagulation resulted in a deterioration filter effluent turbidity (0.2-0.3NTU) and total particle counts (30-100 total particles > or =2microm/mL) that were accompanied by reduced (by approximately 2-3-log) median oocyst and microsphere removals by filtration. At all doses investigated, chitosan coagulation resulted in excellent turbidity and particle reductions by filtration. Nonetheless, chitosan coagulation at doses of 0.1, 0.5, and 1.0mg/L did not result in appreciable improvements in C. parvum oocyst removal relative to complete coagulation failure (median oocyst removals were alum and FeCl(3) coagulation, but not chitosan coagulation.

  8. The oxidation of As(III) in groundwater using biological manganese removal filtration columns.

    Science.gov (United States)

    Yang, Hong; Sun, Wenyong; Ge, Huoqing; Yao, Renda

    2015-01-01

    Arsenic is known as a toxic element to humans, and has been reported to co-exist with iron and manganese in groundwater worldwide. The typical method for arsenic removal from groundwater is to oxidize trivalent (As(III)) to pentavalent (As(V)) followed by the As(V) removal. This study aims to evaluate the oxidization efficiency of As(III) in a mature biological manganese (Mn(2+)) removal filtration system with different elevated influent As(III) concentrations. The effects of influent Mn(2+) concentrations, influent As(III) concentrations, filtration rates and dissolved oxygen (DO) levels on the efficiency of As(III) oxidation were assessed. The results showed that As(III) oxidation can be simultaneously achieved with removing Mn(2+) in the filtration system. The oxidation efficiency was not impacted by increasing the influent As(III) concentration up to nearly 2500 µg L(-1), but the filtration rate was limited at 11 m h(-1) for maintaining the effluent As(III) concentration below 10 µg L(-1). The oxidation process followed first-order kinetics with the constant reaching 0.56-0.61 min(-1). The As(III) oxidation process was most likely to be mediated by the bacterial community initially developed for Mn(2+) removal in the filtration system, which performed the catalytic oxidation for As(III).

  9. The Structural and Functional Organization of the Podocyte Filtration Slits Is Regulated by Tjp1/ZO-1

    OpenAIRE

    Itoh, Masahiko; Nakadate, Kazuhiko; Horibata, Yasuhiro; Matsusaka, Taiji; Xu, Jianliang; Hunziker, Walter; Sugimoto, Hiroyuki

    2014-01-01

    Blood filtration in the kidney glomerulus is essential for physiological homeostasis. The filtration apparatus of the kidney glomerulus is composed of three distinct components: the fenestrated endothelial cells, the glomerular basement membrane, and interdigitating foot processes of podocytes that form the slit diaphragm. Recent studies have demonstrated that podocytes play a crucial role in blood filtration and in the pathogenesis of proteinuria and glomerular sclerosis; however, the molecu...

  10. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  11. Chemical composition and morphology of oxidic ceramics at filtration of steel deoxidised by aluminium

    Directory of Open Access Journals (Sweden)

    J. Bažan

    2009-10-01

    Full Text Available Composition and morphology of filter ceramics were investigated during filtration of steel deoxidised by aluminium. Filtration was realized with use of filters based on oxidic ceramics Cr2O3, TiO2, SiO2, ZrO2, Al2O3, 3Al2O3•2SiO2 and MgO•Al2O3. It was established that change of interphase (coating occurs during filtration of steel on the surface of capillaries of ceramics, where content of basic oxidic component decreases. Loss of oxidic component in the coating is replaced by increase of oxides of manganese and iron and it is great extent inversely proportional to the value of Gibbs’ energy of oxide, which forms this initial basis of ceramics.

  12. Utility of Double Filtration Plasmapheresis in Acute Antibody Mediated Renal Allograft Rejection: Report of Three Cases

    Directory of Open Access Journals (Sweden)

    Yalçın SOLAK

    2011-09-01

    Full Text Available Plasmapheresis is an extracorporeal procedure, which is often employed to rapidly lower circulating titers of autoantibodies, immune complexes or toxins. There are two types of plasmapheresis namely, regular plasmapheresis (RPP by centrifugation and membrane filtration, and double filtration plasmapheresis (DFPP which is a special form of membrane filtration in which two membranes called as plasma separator and plasma fractionator are employed to filter macromolecules more selectively. DFPP have several advantages over RP. Despite widespread utilization of DFPP in the setting of ABO blood group incompatible kidney transplantation, there is no report regarding DFPP in patients with antibody mediated acute renal allograft rejection who are good candidates for beneficial effects of DFPP. Here we report three renal transplant recipients in whom DFPP was applied as a component of anti-rejection treatment regimen.

  13. Approximate solutions to the deep bed filtration problem; Solucoes aproximadas para o problema de deposicao profunda

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Julio M.; Marchesin, Dan [Instituto de Matematica Pura e Aplicada (IMPA), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The deep bed filtration problem is closely related to secondary oil recovery. In this work we derive explicit solutions to two filtration problems. The filtration function varies non-linearly with the Darcy speed and linearly with the deposition, but very little. The first solution is built by the method of perturbations and although it is only an approximation it is available in multiple symmetries, including the radial geometry used in the field. The main motivation is the validation of numerical methods. The second solution is exact but it is only available in the linear symmetry, i.e., laboratory geometry. We use it to verify the accuracy of the first solution, but it can also be used to simulate the deposition in experiments. (author)

  14. A simple filtration technique for obtaining purified human chromosomes in suspension.

    Science.gov (United States)

    Yusuf, Mohammed; Parmar, Neha; Bhella, Gurdeep K; Robinson, Ian K

    2014-05-01

    Here we present a simple method for cleaning polyamine human mitotic chromosomes in solution. This was achieved by filtering intact (unburst) nuclei along with both large and small cytoplasmic debris through a series of different pore sized filters. Pure human chromosomes were recovered using a simple reverse filtration step. Fluorescence microscopy was used to validate the chromosome suspension after each filtration step. This reverse filtration technique is an improvement in both procedure time and chromosome recovery compared to currently used post-purification methods. Chromosomes purified by our method could be used for many applications, such as structural studies using microfluidics and high resolution imaging or generation of chromosome paints and sequencing after flow cytometry.

  15. Nanoparticle Filtration in a RTM Processed Epoxy/Carbon Fiber Composite

    Science.gov (United States)

    Miller, Sandi G.; Micham, Logan; Copa, Christine C.; Criss, James M., Jr.; Mintz, Eric A.

    2011-01-01

    Several epoxy matrix composite panels were fabricated by resin transfer molding (RTM) E862/W resin onto a triaxially braided carbon fiber pre-form. Nanoparticles including carbon nanofiber, synthetic clay, and functionalized graphite were dispersed in the E862 matrix, and the extent of particle filtration during processing was characterized. Nanoparticle dispersion in the resin flashing on both the inlet and outlet edges of the panel was compared by TEM. Variation in physical properties such as Tg and moisture absorption throughout the panel were also characterized. All nanoparticle filled panels showed a decrease in Tg along the resin flow path across the panel, indicating nanoparticle filtration, however there was little change in moisture absorption. This works illustrates the need to obtain good nano-particle dispersion in the matrix resin to prevent particle agglomeration and hence particle filtration in the resultant polymer matrix composites (PMC).

  16. Dynamic fouling behaviors of submerged nonwoven bioreactor for filtration of activated sludge with different SRT.

    Science.gov (United States)

    Chuang, Shun-Hsing; Lin, Po-Kuen; Chang, Wei-Chin

    2011-09-01

    The flux variations and resistances accumulated during filtration of activated sludge with sludge retention time (SRT) of 15, 30, and 60 days were analyzed to investigate the dynamic fouling behavior in a submerged nonwoven bioreactor. Different SRT values varied sludge condition and particle size distribution in the supernatants, which caused dissimilar fouling characteristics. Short-term fouling of the nonwoven bioreactor during filtration of activated sludge with SRT of 15 days was fully reversible, and the resistance percentages of solutes, colloids, and suspended solids were 6%, 27%, and 67%, respectively. On the other hand, significant increases of colloid resistance, such as with the filtration of activated sludge with SRT of 30 and 60 days, were related to the occurrence of irreversible fouling. The phenomenon of pore blocking by particles or colloids with size analogous to the pore of nonwoven fabric was a decisive factor leading to irreversible fouling in the large-pore materials.

  17. Effect of particle size on the performance of batchwise centrifugal filtration.

    Science.gov (United States)

    Hwang, K J

    2001-01-01

    The effect of particle size distribution on the performance of batchwise centrifugal filtration is studied. By analyzing the velocity of particles in a filter, a numerical program is designed for simulating the migration and deposition of particles. The particle size distributions and the average specific filtration resistances of cake are then estimated under various rotating speeds of the centrifuge. A large deviation of particle concentration profiles in the filter chamber will occur if the particle size distribution is not taken into consideration. A more heterogeneous cake will form under a lower rotating speed due to the sedimentation effect of particles. The predicted results of particle size distribution and average specific filtration resistance of cake agree well with the available experimental data.

  18. Effect of Twisting and Stretching on Magneto Resistance and Spin Filtration in CNTs

    Directory of Open Access Journals (Sweden)

    Anil Kumar Singh

    2017-08-01

    Full Text Available Spin-dependent quantum transport properties in twisted carbon nanotube and stretched carbon nanotube are calculated using density functional theory (DFT and non-equilibrium green’s function (NEGF formulation. Twisting and stretching have no effect on spin transport in CNTs at low bias voltages. However, at high bias voltages the effects are significant. Stretching restricts any spin-up current in antiparallel configuration (APC, which results in higher magneto resistance (MR. Twisting allows spin-up current almost equivalent to the pristine CNT case, resulting in lower MR. High spin filtration is observed in PC and APC for pristine, stretched and twisted structures at all applied voltages. In APC, at low voltages spin filtration in stretched CNT is higher than in pristine and twisted ones, with pristine giving a higher spin filtration than twisted CNT.

  19. Filtration of aluminum alloys and its influence on mechanical properties and shape of eutectical silicium

    Directory of Open Access Journals (Sweden)

    M. Brůna

    2008-07-01

    Full Text Available Filtration during casting of high quality aluminum alloys belongs to main refining methods. Even when there are many years of experiences and experimental works on this subject, there are still some specific anomalies. While using ceramic filtration media during casting of aluminum alloys, almost in all experiments occurred increase of strength limit and atypical increase of extension. This anomaly was not explained with classical metallurgical methods, black-white contrast after surface etching neither with color surface etching. For that reason was used deep etching on REM. By using pressed ceramic filters, by studying morphology eutectical silicon was observed modification morphology of eutectical silicon, this explains increase extension after filtration. Pressed ceramic filters were used on experimental works. Casting was executed on hardenable alloy AlSi10MgMn.

  20. Integration of sand and membrane filtration systems for iron and pesticide removal without chemical addition

    DEFF Research Database (Denmark)

    Kowalski, Krysztof; Madsen, Henrik Tækker; Søgaard, Erik Gydesen

    2013-01-01

    Pilot plant investigations of sand and membrane filtration (MF/UF/NF/LPRO) have been performed to treat groundwater polluted with pesticides. The results show that simple treatment, with use of aeration and sand filtration or MF/UF membranes, does not remove pesticides. However, by reducing...... the content of key foulants, the techniques can be used as a pre-treatment for nanofiltration and low pressure reverse osmosis that has proved to be capable of removing pesticides. It was found that a lower fouling potential could be obtained by using the membranes, but that sand filter was better at removing...... manganese and dissolved organic matter. The results indicate that combining aeration; sand filtration and membrane techniques might be a good option for pesticide removal without any addition of chemicals and minimized membrane maintenance....

  1. Comparison of gel filtration and ammonium sulphate precipitation in the purification of diphtheria toxin and toxoid.

    Science.gov (United States)

    Møyner, K; Christiansen, G

    1984-02-01

    Crude diphtheria toxin and toxoid were subjected to purification by gel filtration and stepwise ammonium sulphate precipitation. The various fractions obtained by the purification procedures were studied by immunological methods. A high molecular weight fraction of glycoprotein nature was present in all of the crude preparations studied. The fraction was antigenically non-identical with the real toxin or toxoid and did not have its origin in the culture medium. It showed a long flocculation time when tested against equine diphtheria toxoid antiserum. The fraction could be removed from the crude preparations by gel filtration or by precipitation with 21% (w/v) ammonium sulphate. When comparing toxoids purified by each of these methods, the method of gel filtration resulted in a somewhat higher degree of purity, suggesting that this method would be more suitable than the AS precipitation method for the purification of diphtheria toxoid.

  2. Hydrodynamic filtration in microfluidic channels as size-selection process for giant unilamellar vesicles.

    Science.gov (United States)

    Woo, Youngjun; Heo, Youhee; Shin, Kwanwoo; Yi, Gi-Ra

    2013-04-01

    We have developed hydrodynamic filtration method in microfluidic device for the efficient size-selection of polydisperse lipid vesicles for giant unilamellar vesicles (GUVs), in which vesicles were formed by electroformation method. Combining pinched flow channel design before hydrodynamic filtration, GUVs were flowed and guided to filtration channels, in which small lipid vesicles were further filtered and GUV were remained in main flow channels. For increasing the selectivity of GUV in outlets, length of slit section, or relative flow rate were controlled and drain channels were introduced for avoiding back flow. At higher flow rate in a pinched flow, the fraction of recovered GUVs (>10 microm) were increased, in which most of small vesicles were filtered.

  3. High gradient magnetic filtration of cupric oxide and fly ash particles

    Energy Technology Data Exchange (ETDEWEB)

    Lua, A.C. [Nanyang Technological University (Singapore). School of Mechanical and Production Engineering

    1996-12-31

    High gradient magnetic filtration (HGMF) tests have been carried out on cupric oxide particles and power plant fly ash which were dispersed in air streams. An experimental test rig was set up to conduct these tests. Results showed that for cupric oxide particles, filtration efficiencies of up to 95% were obtained for submicron sizes with dust loadings of up to 0.36 time the matrix volume. For fly ash, filtration efficiencies of up to 65% were obtained for submicron particles. However, all particle sizes showed progressive deterioration in efficiencies with loading. At the end of the test, the matrix had collected 0.52 times its own mass of fly ash. 2 refs., 7 figs.

  4. Alkaline hydrothermal conversion of fly ash filtrates into zeolites 2: utilization in wastewater treatment.

    Science.gov (United States)

    Somerset, Vernon; Petrik, Leslie; Iwuoha, Emmanuel

    2005-01-01

    Filtrates were collected using a codisposal reaction wherein fly ash was reacted with acid mine drainage. These codisposal filtrates were then analyzed by X-ray Fluorescence spectrometry for quantitative determination of the SiO2 and Al2O3 content. Alkaline hydrothermal zeolite synthesis was then applied to the filtrates to convert the fly ash material into zeolites. The zeolites formed under the experimental conditions were faujasite, sodalite, and zeolite A. The use of the fly ash-derived zeolites and a commercial zeolite was explored in wastewater decontamination experiments as it was applied to acid mine drainage in different dosages. The concentrations of Ni, Zn, Cd, As, and Pb metal ions in the treated wastewater were investigated. The results of the treatment of the acid mine drainage with the prepared fly ash zeolites showed that the concentrations of Ni, Zn, Cd, and Hg were decreased as the zeolite dosages of the fly ash zeolite (FAZ1) increased.

  5. Enhanced particle filtration in straight microchannels using shear-modulated inertial migration

    Science.gov (United States)

    Bhagat, Ali Asgar S.; Kuntaegowdanahalli, Sathyakumar S.; Papautsky, Ian

    2008-10-01

    In this work, we introduce a novel method for enhanced particle filtration using shear-modulated inertial migration in straight microchannels. Depending on their size, inertial lift causes particles to migrate toward microchannel walls. Using microchannels with high aspect ratio cross sections, the fluidic shear can be modulated, resulting in preferential equilibration of particles along the longer microchannel walls. Due to large lift forces generated in these high aspect ratio channels, complete particle filtration can be achieved in short distances even at low flow rates (Re<50). Based on this principle, we use a straight microfluidic channel with a rectangular cross section to passively and continuously filter 1.9 μm polystyrene particles. Overall, the proposed technique is versatile and can be easily integrated with on-chip microfluidic systems for filtration of a wide range of particle sizes, from micro- to nanoparticles.

  6. Circulating tumor cell isolation: the assets of filtration methods with polycarbonate track-etched filters.

    Science.gov (United States)

    Dolfus, Claire; Piton, Nicolas; Toure, Emmanuel; Sabourin, Jean-Christophe

    2015-10-01

    Circulating tumor cells (CTCs) arise from primary or secondary tumors and enter the bloodstream by active or passive intravasation. Given the low number of CTCs, enrichment is necessary for detection. Filtration methods are based on selection of CTCs by size using a filter with 6.5 to 8 µm pores. After coloration, collected CTCs are evaluated according to morphological criteria. Immunophenotyping and fluorescence in situ hybridization techniques may be used. Selected CTCs can also be cultivated in vitro to provide more material. Analysis of genomic mutations is difficult because it requires adapted techniques due to limited DNA materials. Filtration-selected CTCs have shown prognostic value in many studies but multicentric validating trials are mandatory to strengthen this assessment. Other clinical applications are promising such as follow-up, therapy response prediction and diagnosis. Microfluidic emerging systems could optimize filtration-selected CTCs by increasing selection accuracy.

  7. Characterization, Leaching, and Filtrations Testing of Ferrocyanide Tank sludge (Group 8) Actual Waste Composite

    Energy Technology Data Exchange (ETDEWEB)

    Fiskum, Sandra K.; Billing, Justin M.; Crum, J. V.; Daniel, Richard C.; Edwards, Matthew K.; Shimskey, Rick W.; Peterson, Reid A.; MacFarlan, Paul J.; Buck, Edgar C.; Draper, Kathryn E.; Kozelisky, Anne E.

    2009-02-28

    This is the final report in a series of eight reports defining characterization, leach, and filtration testing of a wide variety of Hanford tank waste sludges. The information generated from this series is intended to supplement the Waste Treatment and Immobilization Plant (WTP) project understanding of actual waste behaviors associated with tank waste sludge processing through the pretreatment portion of the WTP. The work described in this report presents information on a high-iron waste form, specifically the ferrocyanide tank waste sludge. Iron hydroxide has been shown to pose technical challenges during filtration processing; the ferrocyanide tank waste sludge represented a good source of the high-iron matrix to test the filtration processing.

  8. Carbide sludge management in acetylene producing plants by using vacuum filtration.

    Science.gov (United States)

    Ramasamy, Palanisamy; Periathamby, Agamuthu; Ibrahim, Shaliza

    2002-12-01

    Carbide sludge (10.4-11.5 tonnes day(-1)) is generated from the reaction of calcium carbide (900 kg) and water (6,000 L) in the production of acetylene (2,400 m3), in three selected acetylene manufacturing plants. The sludge (of pH 12.2 and containing Cu, Pb, Fe, Mn, Ni and Zn ions whose concentrations exceed the Department of Environment limits for industrial wastewater) was treated by vacuum filtration as a substitute for the ponding system, which is environmentally less acceptable. A similar system by flocculation was also developed. The filtration system represents an improvement over the ponding method, as shown by a pH of 7 for the clear filtrate; the solid cake, which contains 98% of the metals, can be conveniently disposed at an integrated scheduled waste treatment centre.

  9. Ambient Filtration Method To Rapidly Prepare Highly Conductive, Paper-Based Porous Gold Films for Electrochemical Biosensing.

    Science.gov (United States)

    Guntupalli, Bhargav; Liang, Pingping; Lee, Jung-Hoon; Yang, Yuehai; Yu, Haixiang; Canoura, Juan; He, Jin; Li, Wenzhi; Weizmann, Yossi; Xiao, Yi

    2015-12-16

    Thin gold films offer intriguing material properties for potential applications including fuel cells, supercapacitors, and electronic and photonic devices. We describe here an ambient filtration method that provides a simple and novel way to generate rapidly porous and thin gold films without the need for sophisticated instruments, clean-room environments, and any postgrowth process or sintering steps. Using this approach, we can fabricate highly conductive gold films composed of gold nanoparticles layered atop a matrix of metallic single-walled carbon nanotubes on mixed cellulose ester filter paper within 20 min. These hybrid films (thickness ∼40 nm) exhibit fast electron transfer and excellent electrocatalytic properties that are similar to purchased gold films, but with a larger electroactive surface that lends itself to more sensitive analyte detection. We used the neurotransmitters dopamine and serotonin as benchmark analytes to demonstrate that our hybrid gold films can clearly discriminate the presence of both molecules in a mixture with resolution that greatly exceeds that of either purchased gold slides or electrodeposited gold films. Importantly, we postulate that this new approach could readily be generalized for the rapid fabrication of films from various other metals under ambient conditions, and could also be used as a prelude to transferring the resulting films onto glass or other flexible substrates.

  10. On filtration for high-energy phase-contrast x-ray imaging

    Science.gov (United States)

    Riess, Christian; Mohamed, Ashraf; Hinshaw, Waldo; Fahrig, Rebecca

    2015-03-01

    Phase-sensitive x-ray imaging promises unprecedented soft-tissue contrast and resolution. However, several practical challenges have to be overcome when using the setup in a clinical environment. The system design that is currently closest to clinical use is the grating-based Talbot-Lau interferometer (GBI).1-3 The requirements for patient imaging are low patient dose, fast imaging time, and high image quality. For GBI, these requirements can be met most successfully with a narrow energy width, high- ux spectrum. Additionally, to penetrate a human-sized object, the design energy of the system has to be well above 40 keV. To our knowledge, little research has been done so far to investigate optimal GBI filtration at such high x-ray energies. In this paper, we study different filtration strategies and their impact on high-energy GBI. Specifically, we compare copper filtration at low peak voltage with equal-absorption, equal-imaging time K-edge filtration of spectra with higher peak voltage under clinically realistic boundary conditions. We specifically focus on a design energy of 59 keV and investigate combinations of tube current, peak voltage, and filtration that lead to equal patient absorption. Theoretical considerations suggest that the K edge of tantalum might provide a transmission pocket at around 59 keV, yielding a well-shaped spectrum. Although one can observe a slight visibility benefit when using tungsten or tantalum filtration, experimental results indicate that visibility benefits most from a low x-ray tube peak voltage.

  11. Impacts of Filtration on Contrast-Detail Detectability of an X-ray Imaging System

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available The purpose of this study is to investigate the impacts of added filtration on the contrast-detail detectability of a digital X-ray imaging system for small animal studies. A digital X-ray imaging system specifically designed for small animal studies was used. This system is equipped with a micro X-ray source with a tungsten target and a beryllium window filtration and a CCD-based digital detector. Molybdenum filters of 0 mm, 0.02 mm, and 0.05 mm in thickness were added. The corresponding X-ray spectra and contrast-detail detectabilities were measured using two phantoms of different thicknesses simulating breast tissue under different exposures. The added Mo filters reduced the low-energy as well as the high-energy photons, hence providing a narrowband for imaging quality improvement. In the experiments with a 1.15 cm phantom, the optimal image detectability was observed using 22 kVp and the 0.05 mm Mo filter. With the 2.15 cm phantom, the best detectability was obtained with 22 kVp and the 0.02 mm Mo filter. Our experiments showed that appropriate filtrations could reduce certain low- and high-energy components of X-ray spectra which have limited contributions to image contrast. At the same time, such filtration could improve the contrast-detail detectability, particularly at relatively low kVp and high filtration. Therefore, optimal image quality can be obtained with the same absorbed radiation dose by the subjects when appropriate filtration is used.

  12. Electronic Cigarettes

    Science.gov (United States)

    ... New FDA Regulations Text Size: A A A Electronic Cigarettes Electronic cigarettes (e-cigarettes) are battery operated products designed ... more about: The latest news and events about electronic cigarettes on this FDA page Electronic cigarette basics ...

  13. Filtrated K-theory for real rank zero C*-algebras

    DEFF Research Database (Denmark)

    Arklint, Sara Esther; Restorff, Gunnar; Ruiz, Efren

    2012-01-01

    The smallest primitive ideal spaces for which there exist counterexamples to the classification of non-simple, purely infinite, nuclear, separable C*-algebras using filtrated K-theory, are four-point spaces. In this article, we therefore restrict to real rank zero C*-algebras with four......-point primitive ideal spaces. Up to homeomorphism, there are ten different connected T0-spaces with exactly four points. We show that filtrated K-theory classifies real rank zero, tight, stable, purely infinite, nuclear, separable C*-algebras that satisfy that all simple subquotients are in the bootstrap class...

  14. Simulation of the filtration mechanism of hyaluronic acid in total knee prosthesis

    Energy Technology Data Exchange (ETDEWEB)

    Paolo, J Di [GBC, Facultad de Ingenieria, Universidad Nacional de Entre Rios, Oro Verde, Ruta 11 km 10, 3101 (Argentina); Berli, M E [GBC, Facultad de Ingenieria, Universidad Nacional de Entre Rios, Oro Verde, Ruta 11 km 10, 3101 (Argentina); Campana, D M [GBC, Facultad de Ingenieria, Universidad Nacional de Entre Rios, Oro Verde, Ruta 11 km 10, 3101 (Argentina); Ubal, S [GBC, Facultad de Ingenieria, Universidad Nacional de Entre Rios, Oro Verde, Ruta 11 km 10, 3101 (Argentina); Cardenes, L D [GBC, Facultad de Ingenieria, Universidad Nacional de Entre Rios, Oro Verde, Ruta 11 km 10, 3101 (Argentina)

    2007-11-15

    Polyethylene (UHMWPE) wear in current knee prosthesis causes prosthesis loosening after no more than 15 years. In this work, a steady state one-dimensional lubrication model with non- Newtonian fluid, porous elastic layer on tibial component, ultra-filtration mechanism of fluid and some features of the surface roughness is studied through a numerical technique based on the Finite Element Method. The results show that the UHMWPE stiffness makes difficult the lubrication mechanism of the artificial joint and promotes abrasive and fatigue wear. Nevertheless, the use of compliant porous materials on the tibial component could reduce friction and wear. Moreover, the ultra-filtration mechanism promotes efficiency on the joint.

  15. Isolation and purification of bovine immunoglobulins: use of Sephacryl S-300 filtration avoids protein precipitation steps.

    Science.gov (United States)

    Collard, A; Pivont, P; Portetelle, D; Gregoire, R; Burny, A; Antoine, H

    1984-01-01

    A simplified purification method for bovine IgG1, IgG2, IgM, IgA and S-IgA is presented. It takes advantage of Sephacryl S-300 gel filtration. When applied to this column, colostral whey can be separated into IgM, S-IgA and IgG rich fractions. Filtration of blood serum leads to IgM, IgA and IgG rich fractions. IgM, IgG1, IgG2, S-IgA and IgA are then further purified by anion exchange chromatography.

  16. Integration of sand and membrane filtration systems for iron and pesticide removal without chemical addition

    DEFF Research Database (Denmark)

    Kowalski, Krysztof; Madsen, Henrik Tækker; Søgaard, Erik Gydesen

    2013-01-01

    Pilot plant investigations of sand and membrane filtration (MF/UF/NF/LPRO) have been performed to treat groundwater polluted with pesticides. The results show that simple treatment, with use of aeration and sand filtration or MF/UF membranes, does not remove pesticides. However, by reducing...... the content of key foulants, the techniques can be used as a pre-treatment for nanofiltration and low pressure reverse osmosis that has proved to be capable of removing pesticides. It was found that a lower fouling potential could be obtained by using the membranes, but that sand filter was better at removing...

  17. Challenges of Membrane Filtration for Produced Water Treatment in Offshore Oil & Gas Production

    DEFF Research Database (Denmark)

    Jepsen, Kasper Lund; Hansen, Leif; Mai, Christian;

    2016-01-01

    the Water Flooding Technology (WFT) is employed. The quality requirements for WFT and the increasing environmental concerns for produced water discharge lead to increased interest in zero-pollutant discharge. Traditional Produced Water Treatment (PWT) technologies(such as hydrocyclones) are already...... struggling to their fundamental limit, therefore the membrane filtration technology turns to be a potential candidate for zero pollutant discharge. Membrane filtration technology suffers from the notorious fouling problem, where many methods for fouling prevention and removal are explored, the general idea...

  18. Estimating filtration coefficients for straining from percolation and random walk theories

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander; You, Zhenjiang

    2012-01-01

    In this paper, laboratory challenge tests are carried out under unfavorable attachment conditions, so that size exclusion or straining is the only particle capture mechanism. The experimental results show that far above the percolation threshold the filtration coefficients are not proportional...... size exclusion theory or the model of parallel tubes with mixing chambers, where the filtration coefficients are proportional to the flux through smaller pores, and the predicted penetration depths are much lower. A special capture mechanism is proposed, which makes it possible to explain...

  19. Wet-Laid Meets Electrospinning: Nonwovens for Filtration Applications from Short Electrospun Polymer Nanofiber Dispersions.

    Science.gov (United States)

    Langner, Markus; Greiner, Andreas

    2016-02-01

    Dispersions of short electrospun fibers are utilized for the preparation of nanofiber nonwovens with different weight area on filter substrates. The aerosol filtration efficiencies of suspension-borne nanofiber nonwovens are compared to nanofiber nonwovens prepared directly by electrospinning with similar weight area. The filtration efficiencies are found to be similar for both types of nonwovens. With this, a large potential opens for processing, design, and application of new nanofiber nonwovens obtained by wet-laying of short electrospun nanofiber suspensions. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Double filtration plasmapheresis in a dog with multiple myeloma and hyperviscosity syndrome

    Directory of Open Access Journals (Sweden)

    I. Lippi

    2015-08-01

    Full Text Available A 12 year old, 38 kg, mix-breed, intact male dog presented with a 20 day history of clinical signs consistent with hyperviscosity syndrome secondary to multiple myeloma. The dog received three double filtration plasmapheresis treatments on day 0, 7 and 22 after presentation. A significant (p<0.05 reduction in serum total protein, alpha-2 and gamma globulins was found following each treatment. These reductions were accompanied by a complete resolution, although temporary, of the clinical signs of hyperviscosity syndrome. The present study reported for the first time the use of double filtration plasmapheresis to reduce clinical signs of hyperviscosity syndrome in a dog with multiple myeloma.