WorldWideScience

Sample records for filter baf reactor

  1. Production of sorption functional media (SFM) from clinoptilolite tailings and its performance investigation in a biological aerated filter (BAF) reactor

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Yan [School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090 (China); School of Civil Engineering and Architecture, University of Jinan, Jinan 250022 (China); Qi, Jingyao, E-mail: qjy_hit@yahoo.cn [School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090 (China); Chi, Liying [School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090 (China); Wang, Dong [School of Civil Engineering and Architecture, University of Jinan, Jinan 250022 (China); Wang, Zhaoyang; Li, Ke; Li, Xin [School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090 (China)

    2013-02-15

    Highlights: ► Sorption functional media (SFM) were prepared using zeolite tailings. ► Two upflow BAFs were applied to treat municipal wastewater. ► SFM BAF brought a relative superiority to haydite reactor. ► SFM BAF has a stronger adaptability to low temperature (6–11°C) for NH{sub 3}-N removal. ► The application provided a promising way in zeolite tailings utilization. -- Abstract: The few reuse and large stockpile of zeolite tailings led to a series of social and environmental problems. This study investigated the possibility of using the zeolite tailings as one of principal raw materials to prepare sorption functional media (SFM) by a high temperature sintering process. The SFM was used to serve as a biomedium in a biological aerated filter (BAF) reactor for domestic wastewater treatment, and its purification performance was examined. The physical, chemical and sorption properties of SFM were also determined. The microstructure of the SFM was analyzed by scanning electron microscopy (SEM). Results revealed that: (1) zeolite tailings could be used to produce the SFM under the optimal sintering parameters; (2) the sorption and desorption isotherm of ammonia nitrogen on SFM could be well described by the Langmuir formula; (3) in terms of removing organic matter, ammonia nitrogen, turbidity and colourity, the performance of the biofilter with SFM was superior to that with haydite; and (4) SFM BAF has a stronger adaptability to low temperature (6–11 °C) for NH{sub 3}-N removal compared to haydite BAF. Therefore, the SFM produced from the zeolite tailings was suitable to serve as the biomedium in the domestic wastewater treatment.

  2. Production of sorption functional media (SFM) from clinoptilolite tailings and its performance investigation in a biological aerated filter (BAF) reactor.

    Science.gov (United States)

    Feng, Yan; Qi, Jingyao; Chi, Liying; Wang, Dong; Wang, Zhaoyang; Li, Ke; Li, Xin

    2013-02-15

    The few reuse and large stockpile of zeolite tailings led to a series of social and environmental problems. This study investigated the possibility of using the zeolite tailings as one of principal raw materials to prepare sorption functional media (SFM) by a high temperature sintering process. The SFM was used to serve as a biomedium in a biological aerated filter (BAF) reactor for domestic wastewater treatment, and its purification performance was examined. The physical, chemical and sorption properties of SFM were also determined. The microstructure of the SFM was analyzed by scanning electron microscopy (SEM). Results revealed that: (1) zeolite tailings could be used to produce the SFM under the optimal sintering parameters; (2) the sorption and desorption isotherm of ammonia nitrogen on SFM could be well described by the Langmuir formula; (3) in terms of removing organic matter, ammonia nitrogen, turbidity and colourity, the performance of the biofilter with SFM was superior to that with haydite; and (4) SFM BAF has a stronger adaptability to low temperature (6-11°C) for NH(3)-N removal compared to haydite BAF. Therefore, the SFM produced from the zeolite tailings was suitable to serve as the biomedium in the domestic wastewater treatment.

  3. Production of lightweight ceramisite from iron ore tailings and its performance investigation in a biological aerated filter (BAF) reactor.

    Science.gov (United States)

    Liu, Yangsheng; Du, Fang; Yuan, Li; Zeng, Hui; Kong, Sifang

    2010-06-15

    The few reuse and large stockpile of iron ore tailings (IOT) led to a series of social and environmental problems. This study investigated the possibility of using the IOT as one of starting materials to prepare lightweight ceramisite (LWC) by a high temperature sintering process. Coal fly ash (CFA) and municipal sewage sludge (SS) were introduced as additives. The LWC was used to serve as a biomedium in a biological aerated filter (BAF) reactor for municipal wastewater treatment, and its purification performance was examined. The effects of sintering parameters on physical properties of the LWC, and leaching concentrations of heavy metals from the LWC were also determined. The microstructure and the phase composition of the LWC were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Results revealed that: (1) IOT could be used to produce the LWC under the optimal sintering parameters; (2) the leaching concentrations of heavy metals from the LWC were well below their respective regulatory levels in the China Environmental Quality Standards for Surface Water (CEQS); and (3) the BAF reactor with the LWC serving as the biomedium achieved high removal efficiencies for COD(Cr) (>92%), NH(4)(+)-N (>62%) and total phosphate (T-P) (>63%). Therefore, the LWC produced from the IOT was suitable to serve as the biomedium in the municipal wastewater treatment. Copyright 2010 Elsevier B.V. All rights reserved.

  4. Advanced treatment of biologically pretreated coal gasification wastewater using a novel anoxic moving bed biofilm reactor (ANMBBR)-biological aerated filter (BAF) system.

    Science.gov (United States)

    Zhuang, Haifeng; Han, Hongjun; Jia, Shengyong; Zhao, Qian; Hou, Baolin

    2014-04-01

    A novel system integrating anoxic moving bed biofilm reactor (ANMBBR) and biological aerated filter (BAF) with short-cut biological nitrogen removal (SBNR) process was investigated as advanced treatment of real biologically pretreated coal gasification wastewater (CGW). The results showed the system had efficient capacity of degradation of pollutants especially nitrogen removal. The best performance was obtained at hydraulic residence times of 12h and nitrite recycling ratios of 200%. The removal efficiencies of COD, total organic carbon, NH4(+)-N, total phenols and total nitrogen (TN) were 74.6%, 70.0%, 85.0%, 92.7% and 72.3%, the corresponding effluent concentrations were 35.1, 18.0, 4.8, 2.2 and 13.6mg/L, respectively. Compared with traditional A(2)/O process, the system had high performance of NH4(+)-N and TN removal, especially under the high toxic loading. Moreover, ANMBBR played a key role in eliminating toxicity and degrading refractory compounds, which was beneficial to improve biodegradability of raw wastewater for SBNR process.

  5. BIOLOGICAL AERATED FILTERS (BAFs FOR CARBON AND NITROGEN REMOVAL: A REVIEW

    Directory of Open Access Journals (Sweden)

    ELSHAFIE AHMED

    2012-08-01

    Full Text Available Biological aerated filters (BAFs are an emerging wastewater treatment technology designed for a wide range of municipal and industrial applications. This review paper presents and discusses of the influence C/N ratio, nitrification and denitrification principle, effect of pH, DO and alkalinity on the nitrification and denitrification systems, organic and hydraulic loading of BAF reactor, etc. Results from upflow and downflow biofilter pilot at different condition, with nitrification and denitrification are reviewed. Under the optimal conditions, significant amount of COD, ammonia-nitrogen and total nitrogen were removed. Removal rates based on reactor volume for different carbon-aceous COD and ammonia loading rate are reported. The BAF system for the nitrification and denitrification processes for carbon and nitrogen removal from the wastewater need to be evaluated and applied properly to protect of our environment and resources.

  6. Comparison of combined and separated biological aerated filter (BAF) performance for pre-denitrification/nitrification of municipal wastewater.

    Science.gov (United States)

    Rother, E; Cornel, P; Ante, A; Kleinert, P; Brambach, R

    2002-01-01

    The performance of two systems of semi-industrial up-flow biological aerated filters (BAF) with pre-denitrification followed by nitrification was studied and compared under various operating and loading conditions. The first system consisted of two separate reactors for the denitrification and the nitrification step, whereas in the second system the aerobic nitrification zone was packed on top of the anoxic denitrification zone in one reactor. The second system potentially offers substantial savings in investment costs and space requirements for a large scale treatment plant. Regarding the elimination of carbonaceous pollution and denitrification the systems did not show significant differences. However, nitrification in the combined system suffered from the mixing of different biocenosis by daily backwashing and was reduced to 50-70% of the separated system's performance. Factors such as oxygen concentration, raw water composition and loading rates affected both systems' nitrification rates in similar ways. Since it is impossible to optimise the nitrification and denitrification processes separately, the combined system should only be considered for large scale applications if space is very scarce and if a stable raw water composition can be expected. If strict limit values for nitrate have to be met in the effluent, a combination of pre- and post-denitrification is advantageous and advisable.

  7. Study on the factors affecting simultaneous removal of ammonia and manganese by pilot-scale biological aerated filter (BAF) for drinking water pre-treatment.

    Science.gov (United States)

    Han, Mei; Zhao, Zhi-wei; Gao, Wei; Cui, Fu-yi

    2013-10-01

    It was demonstrated that simultaneous removal of ammonia and manganese could be accomplished by biological aerated filter (BAF) with low-cost lava as media. Long-term operation performance and impact factors were systematically studied. DGGE analysis demonstrated that ammonia oxidizing bacteria (AOB), manganese oxidizing bacteria (MOB) and simultaneous ammonia and manganese oxidizing bacteria (SAMOB) co-existed in the bio-film. Ammonia and manganese concentration profiles along the height of BAF column, including that in the influent and effluent, were investigated with varying hydraulic loadings, aeration intensities and feed ammonia concentrations. It was inferred that AOB and MOB may have different spatial distribution in vertical direction, and AOB and MOB may compete for oxygen capture or be present on different layers of the bio-films. Further work should focus on the distribution of AOB, MOB and SAMOB in the reactor and optimize it for more efficient mass transfer and better system performance. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Biodegradation behavior of natural organic matter (NOM) in a biological aerated filter (BAF) as a pretreatment for ultrafiltration (UF) of river water

    KAUST Repository

    Huang, Guocheng

    2011-04-15

    In this study, biodegradation of natural organic matter (NOM) in a biological aerated filter (BAF) as pretreatment of UF treating river water was investigated. Photometric measurement, three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy and liquid chromatography with online organic carbon detector (LC-OCD) were used to investigate the fate of NOM fractions in the BAF+UF process. Results showed that the BAF process could effectively remove particles and parts of dissolved organic matter, which led to a lower NOM loading in the UF system, but different NOM fractions showed different biodegradation potentials. Further biodegradation batch experiments confirmed this observation and identified that polysaccharides and proteins (quantified using photometric methods) contained a large proportion of readily biodegradable matter while humic substances were mainly composed of inert organic substances. According to EEM measurements, it is evident that protein-like substances were more readily eliminated by microorganisms than humic-like substances. LC-OCD data also supported the phenomena that the polysaccharides and large-size proteins were more degradable than humic substances. © 2011 Springer-Verlag.

  9. Process of inorganic nitrogen transformation and design of kinetics model in the biological aerated filter reactor.

    Science.gov (United States)

    Yan, Gang; Xu, Xia; Yao, Lirong; Lu, Liqiao; Zhao, Tingting; Zhang, Wenyi

    2011-04-01

    As one of the plug-flow reactors, biological aerated filter (BAF) reactor was divided into four sampling sectors to understand the characteristics of elemental nitrogen transformation during the reaction process, and then the different characteristics of elemental nitrogen transformation caused by different NH(3)-N loadings, biological quantities and activities in each section were obtained. The results showed that the total transformation ratio in the nitrifying reactor was more than 90% in the absence of any organic carbon resource, at the same time, more than 65% NH(3)-N in the influent were nitrified at the filter height of 70 cm below under the conditions of the influent runoff 9-19 L/h, the gas-water ratio 4-5:1, the dissolved oxygen 3.0-5.8 mg/L and the NH(3)-N load 0.28-0.48 kg NH(3)-N/m(3) d. On the base of the Eckenfelder mode, the kinetics equation of the NH(3)-N transformation along the reactor was S(e)=S(0) exp(-0.0134D/L(1.2612)).

  10. Reactors

    CERN Document Server

    International Electrotechnical Commission. Geneva

    1988-01-01

    This standard applies to the following types of reactors: shunt reactors, current-limiting reactors including neutral-earthing reactors, damping reactors, tuning (filter) reactors, earthing transformers (neutral couplers), arc-suppression reactors, smoothing reactors, with the exception of the following reactors: small reactors with a rating generally less than 2 kvar single-phase and 10 kvar three-phase, reactors for special purposes such as high-frequency line traps or reactors mounted on rolling stock.

  11. Hybrid Plasma Reactor/Filter for Transportable Collective Protection Systems

    Energy Technology Data Exchange (ETDEWEB)

    Josephson, Gary B.; Tonkyn, Russell G.; Frye, J. G.; Riley, Brian J.; Rappe, Kenneth G.

    2011-04-06

    Pacific Northwest National Laboratory (PNNL) has performed an assessment of a Hybrid Plasma/Filter system as an alternative to conventional methods for collective protection. The key premise of the hybrid system is to couple a nonthermal plasma (NTP) reactor with reactive adsorption to provide a broader envelope of protection than can be provided through a single-solution approach. The first step uses highly reactive species (e.g. oxygen radicals, hydroxyl radicals, etc.) created in a nonthermal plasma (NTP) reactor to destroy the majority (~75% - 90%) of an incoming threat. Following the NTP reactor an O3 reactor/filter uses the O3 created in the NTP reactor to further destroy the remaining organic materials. This report summarizes the laboratory development of the Hybrid Plasma Reactor/Filter to protect against a ‘worst-case’ simulant, methyl bromide (CH3Br), and presents a preliminary engineering assessment of the technology to Joint Expeditionary Collective Protection performance specifications for chemical vapor air purification technologies.

  12. Combination and Application on A/O Bio-chemical Pool and BAF Biological Filter%A/O生化池和BAF生物滤池的组合应用

    Institute of Scientific and Technical Information of China (English)

    段进元

    2012-01-01

      The paper presents the application principle and its result on two-grade combination of bio-chemistry of A/O bio-chemical pool and BAF biological filter, makes analysis on inlet and outlet water quality of two-grade bio-chemistry and explains the problems existed in system operation.%  较为全面地介绍了A/O生化池和BAF生物滤池两级生化合并的应用原理和效果,对两级生化的进出水水质进行了分析,并对系统运行中存在的问题进行了阐述。

  13. The Entrance and Exit Effects in Small Electrochemical Filter-Press Reactors Used in the Laboratory

    Science.gov (United States)

    Frias-Ferrer, Angel; Gonzalez-Garcia, Jose; Saez, Veronica; Exposito, Eduardo; Sanchez-Sanchez, Carlos M.; Mantiel, Vicente; Walsh, Frank C.; Aldaz, Antonio; Walsh, Frank C.

    2005-01-01

    A laboratory experiment designed to examine the entrance and exit effects in small electrochemical filter-press reactors used in the laboratory is presented. The single compartment of the filter-press reactor is filled with different turbulence promoters to study their influence as compared to the empty configuration.

  14. Design and operation of a filter reactor for continuous production of a selected pharmaceutical intermediate

    DEFF Research Database (Denmark)

    Christensen, Kim Müller; Pedersen, Michael Jønch; Dam-Johansen, Kim;

    2012-01-01

    A novel filter reactor system for continuous production of selected pharmaceutical intermediates is presented and experimentally verified. The filter reactor system consists of a mixed flow reactor equipped with a bottom filter, to retain solid reactant particles, followed by a conventional plug...... flow reactor, where residual reactant is converted by titration. A chemical case study, production of the pharmaceutical intermediate allylcarbinol by a reaction between allylmagnesium chloride and 2-chloro-thioxanthone, in the presence of a side reaction is considered. The synthesis is conducted......-batch operation, are reduced impurity formation and the use of much lower reactor volumes (factor of 1000 based on the laboratory reactor) and less solvent consumption (from 5.8 to 2.3L/kg reactant). Added challenges include handling of continuous solid powder feeding, stable pumping of reactive slurries...

  15. Enhanced phosphorus and ciprofloxacin removal in a modified BAF system by configuring Fe-C micro electrolysis: Investigation on pollutants removal and degradation mechanisms.

    Science.gov (United States)

    Zhang, Longlong; Yue, Qinyan; Yang, Kunlun; Zhao, Pin; Gao, Baoyu

    2017-09-08

    A modified biological aerated filter (BAF) system configured Fe-C micro electrolysis was applied to enhance phosphorus and ciprofloxacin (CIP) removal. A novel sludge ceramic and sintering ferric-carbon ceramic (SFC) were separately packed into a lab-scale BAF and Fe-C micro electrolysis reactor. The BAF and Fe-C micro electrolysis coupled system was operated about 230days. The enhancement of phosphorus and ciprofloxacin removals by Fe-C micro electrolysis, the degradation mechanisms of CIP and the variations of microbial population were investigated. The removal efficiencies of chemical oxygen demand (CODcr), ammonia (NH4-N), total phosphorus (TP) and CIP reached about 95%, 95%, 80% and 85% in the combined process, respectively. Configuring Fe-C micro electrolysis significantly enhanced phosphorus and CIP removal, whereas had no promotion on N removal. Four main degradation pathways were proposed according to the LC-MS analysis. More than 12 degradation products were detected through the treatment of Fe-C micro electrolysis and only 3 biodegraded products with low concentration were identified in BAF effluent. The high-throughput sequencing analysis showed that the microbial community changed a lot under CIP pressure. The relative abundance of Sphingomonadaceae, Xanthomonadaceae, Bradyrhizobium, Helicobacter and Pseudomonas increased with CIP influent. This study provides a promising process in CIP wastewater treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Fast Pyrolysis of Biomass in a Fluidized Bed Reactor: In Situ Filtering of the Vapors

    NARCIS (Netherlands)

    Hoekstra, Elly; Hogendoorn, Kees J.A.; Wang, Xiaoquan; Westerhof, Roel J.M.; Kersten, Sascha R.A.; Swaaij, van Wim P.M.; Groeneveld, Michiel J.

    2009-01-01

    A system to remove in situ char/ash from hot pyrolysis vapors has been developed and tested at the University of Twente. The system consists of a continuous fluidized bed reactor (0.7 kg/h) with immersed filters (wire mesh, pore size 5 μm) for extracting pyrolysis vapors. Integration of the filter s

  17. Filtered epithermal quasi-monoenergetic neutron beams at research reactor facilities.

    Science.gov (United States)

    Mansy, M S; Bashter, I I; El-Mesiry, M S; Habib, N; Adib, M

    2015-03-01

    Filtered neutron techniques were applied to produce quasi-monoenergetic neutron beams in the energy range of 1.5-133keV at research reactors. A simulation study was performed to characterize the filter components and transmitted beam lines. The filtered beams were characterized in terms of the optimal thickness of the main and additive components. The filtered neutron beams had high purity and intensity, with low contamination from the accompanying thermal emission, fast neutrons and γ-rays. A computer code named "QMNB" was developed in the "MATLAB" programming language to perform the required calculations.

  18. Cleaning of porous filters in fossilized bed reactors; Estudio de limpieza de filtros porosos en reactores de lecho fluidizado

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigo Otero, A.; Sancho Rod, J.

    1965-07-01

    In this report are established the optimum working conditions of a filter cleaning system by blow back. For this purpose it was determined in the first place the blow back air rate necessary to have a good cleaning. The reasons for which it was not possible until now to control the pressure in a fluidized bed calcination reactor are analyzed and a criteria is established to calculate the optimum floe necessary to clean efficiently a porous by this procedures. (Author)

  19. Single-crystal filters for attenuating epithermal neutrons and gamma rays in reactor beams

    DEFF Research Database (Denmark)

    Rustad, B.M.; Als-Nielsen, Jens Aage; Bahnsen, A.

    1965-01-01

    Cross section of representative samples of bismuth and quartz were measured at room and liquid nitrogen temperatures over neutron energy range of 0.0007 to 2.0 ev to obtain data for design of single-crystal 32-cm bismuth filters for attenuating fast neutrons and γ-rays in reactor beams; filters may...... be constructed to optimize beam characteristics for low energy neutron experiments....

  20. Hybrid Plasma Reactor/Filter for Transportable Collective Protection Systems

    Science.gov (United States)

    2011-03-01

    None From the ion chromatography results we can calculate the concentration of HNO3 in the gas leaving the plasma reactor. The small NO3- detected...resistant to decomposition by O3. Carbon and polymeric adsorbents were not considered because they would react with O3 and decompose . Potential...nor any ability to decompose ozone. A SAC-13 catalyst was obtained from Engelhard for testing also. This material is an H- Nafion Ion Exchange

  1. The Reduced Rank of Ensemble Kalman Filter to Estimate the Temperature of Non Isothermal Continue Stirred Tank Reactor

    OpenAIRE

    Erna Apriliani; Dieky Adzkiya; Arief Baihaqi

    2011-01-01

    Kalman filter is an algorithm to estimate the state variable of dynamical stochastic system. The square root ensemble Kalman filter is an modification of Kalman filter. The square root ensemble Kalman filter is proposed to keep the computational stability and reduce the computational time. In this paper we study the efficiency of the reduced rank ensemble Kalman filter. We apply this algorithm to the non isothermal continue stirred tank reactor problem. We decompose the covariance of the ense...

  2. Radionuclide removal from reactor wastes by HGMF. [High gradient magnetic filter

    Energy Technology Data Exchange (ETDEWEB)

    Emory, B.B.

    1981-04-01

    This paper describes experiments conducted to support the use of a high gradient magnetic filter (HGMF) to remove radioactive particulate matter generated by internal decontamination of water-cooled nuclear reactors. Decontamination schemes for reduction of radiation exposure at power reactors call for the introduction of chemical reagents into the primary circuit to loosen and flush the radioactive corrosion products from the internal surfaces. This produces large volumes of liquid radioactive wastes which must be treated to remove the soluble and particulate material so that the water can be disposed of. Mechanical filters produce a large volume of filter material versus the volume of particulates removed and are limited as to the smallest particulate size removed, with resultant recontamination of the cleaned surfaces. The majority of the material removed is in the particulate form and is magnetically susceptible, therefore the HGMF has provided to be ideally suited to this application. 3 figures, 1 table.

  3. Optimization of the purification process of wine lees through anaerobic filter reactors. Optimizacion del proceso de depuracion de vinazas de vino mediante reactores tipo filtro anaerobio

    Energy Technology Data Exchange (ETDEWEB)

    Nebot Sanz, E.; Romero Garcia, L.I.; Quiroga Alonso, J.M.; Sales Marquez, D. (Departamento de Ingenieria Quimica, Universidad de Cadiz, Cadiz (Spain))

    1994-01-01

    In this work, the optimization of thermophilic anaerobic process, using Anaerobic Filter technology was studied. Feed of the Anaerobic Filter was wine-distillery wastewaters. The experiments developed were carried out at lab-scale downflow anaerobic filter reactors. Reactors were filled with a high porous plastic media (Flocor-R). The media support entities have a high surface/volume ratio. Test were run to determine the maximum organic load attainable in the system for wich both, the depurative efficiency and the methane production were optimum. Likewise, the effect of organic load on the anaerobic filter performance were studied. (Author) 15 refs. (Author)

  4. Synergistic Water-Treatment Reactors Using a TiO2-Modified Ti-Mesh Filter

    Directory of Open Access Journals (Sweden)

    Akira Fujishima

    2013-07-01

    Full Text Available The recent applications of a TiO2-modified Ti-mesh filter (TMiP™ for water purification are summarized with newly collected data including biological assays as well as sewage water treatment. The water purification reactors consist of the combination of a TMiP, a UV lamp, an excimer VUV lamp, and an ozonation unit. The water purification abilities of the reactor were evaluated by decomposition of organic contaminants, inactivation of waterborne pathogens, and treatment efficiency for sewage water. The UV-C/TMiP/O3 reactor disinfected E. coli in aqueous suspension in approximately 1 min completely, and also decreased the number of E. coli in sewage water in 15 min dramatically. The observed rate constants of 7.5 L/min and 1.3 L/min were calculated by pseudo-first-order kinetic analysis respectively. Although organic substances in sewage water were supposed to prevent the UV-C/TMiP/O3 reactor from purifying water, the reactor reduced E. coli in sewage water continuously. On the other hand, although much higher efficiencies for decomposition of organic pollutants in water were achieved in the excimer/TMiP reactor, the disinfection activity of the reactor for waterborne pathogens was not as effective as the other reactors. The difference of efficiency between organic pollutants and waterborne pathogens in the excimer/TMiP reactor may be due to the size, the structure, and the decomposition mechanism of the organic pollutants and waterborne pathogens. These results show that a suitable system assisted by synergy of photocatalysts and other technologies such as ozonation has a huge potential as a practical wastewater purification system.

  5. Anaerobic filter reactor performance for the treatment of complex dairy wastewater at industrial scale.

    Science.gov (United States)

    Omil, Francisco; Garrido, Juan M; Arrojo, Belén; Méndez, Ramón

    2003-10-01

    The wastewaters discharged by raw milk quality control laboratories are more complex than the ones commonly generated by dairy factories because of the presence of certain chemicals such as sodium azide or chloramphenicol, which are used for preserving milk before analysis. The treatment of these effluents has been carried out in a full-scale plant comprising a 12 m(3) anaerobic filter (AF) reactor and a 28 m(3) sequential batch reactor (SBR). After more than 2 years of operation, a successful anaerobic treatment of these effluents was achieved, without fat removal prior to the anaerobic reactor. The organic loading rates maintained in the AF reactor were 5-6 kg COD/m(3) d, with COD removal being higher than 90%. No biomass washout was observed, and most of the fat contained in the wastewaters was successfully degraded. The addition of alkalinity is crucial for the maintenance of a proper buffer medium to ensure pH stability. The effluent of the AF reactor was successfully treated in the SBR reactor, and a final effluent with a COD content below 200 mg/l and total nitrogen below 10mg N/l was obtained.

  6. Particulate Filtration from Emissions of a Plasma Pyrolysis Assembly Reactor Using Regenerable Porous Metal Filters

    Science.gov (United States)

    Agui, Juan H.; Abney, Morgan; Greenwood, Zachary; West, Philip; Mitchell, Karen; Vijayakumar, R.; Berger, Gordon M.

    2017-01-01

    Microwave-based plasma pyrolysis technology is being studied as a means of supporting oxygen recovery in future spacecraft life support systems. The process involves the conversion of methane produced from a Sabatier reactor to acetylene and hydrogen, with a small amount of solid carbon particulates generated as a side product. The particles must be filtered before the acetylene is removed and the hydrogen-rich gas stream is recycled back to the CRA. We discuss developmental work on porous metal media filters for removing the carbon particulate emissions from the PPA exit gas stream and to provide in situ media regeneration capability. Because of the high temperatures involved in oxidizing the deposited carbon during regeneration, there was particular focus in this development on the materials that could be used, the housing design, and heating methods. This paper describes the design and operation of the filter and characterizes their performance from integrated testing at the Environmental Chamber (E-Chamber) at MSFC.

  7. Particulate filtration from emissions of a plasma pyrolysis assembly reactor using regenerable porous metal filters

    Science.gov (United States)

    Berger, Gordon M.; Agui, Juan H.; Vijayakumar, R.; Abney, Morgan B.; Greenwood, Zachary W.; West, Philip J.; Mitchell, Karen O.

    2017-01-01

    Microwave-based plasma pyrolysis technology is being studied as a means of supporting oxygen recovery in future spacecraft life support systems. The process involves the conversion of methane produced from a Sabatier reactor to acetylene and hydrogen, with a small amount of solid carbon particulates generated as a side product. The particles must be filtered before the acetylene is removed and the hydrogen-rich gas stream is recycled back to the CRA. We discuss developmental work on porous metal media filters for removing the carbon particulate emissions from the PPA exit gas stream and to provide in situ media regeneration capability. Because of the high temperatures involved in oxidizing the deposited carbon during regeneration, there was particular focus in this development on the materials that could be used, the housing design, and heating methods. This paper describes the design and operation of the filter and characterizes their performance from integrated testing at the Environmental Chamber (E-Chamber) at MSFC.

  8. Performance evaluation of cigarette filter rods as a biofilm carrier in an anaerobic moving bed biofilm reactor.

    Science.gov (United States)

    Sabzali, Ahmad; Nikaeen, Mahnaz; Bina, Bijan

    2012-01-01

    Biocarriers are an important component of anaerobic moving bed biofilm reactors (AMBBRs). In this study, the capability of cigarette filter rods (CFRs) as a biocarrier in an anaerobic moving bed biofilm reactor was evaluated. Two similar lab-scale anaerobic moving bed biofilm reactors were undertaken using Kaldnes-K3 plastic media and cigarette filter rods (wasted filters from tobacco factories) as biofilm attachment media for wastewater treatment. Organic substance and total posphours (TP) removal was investigated over 100 days. Synthetic wastewater was prepared with ordinary water and glucose as the main sources of carbon and energy, plus balanced macro- and micro-nutrients. Process performance was studied by increasing the organic loading rate (OLR) in the range of 1.6-4.5 kg COD/m3 x d. The COD average removal efficiency were 61.3% and 64.5% for AMBBR with cigarette filter rods (Reactor A) and AMBBR with Kaldnes plastic media (Reactor B), respectively. The results demonstrate that the performance of the AMBBR containing 0.25 litres of cigarette filters was comparable with a similar reactor containing 1.5 litres of Kaldnes plastic media. An average phosphorus removal of 67.7% and 72.9% was achieved by Reactors A and B, respectively.

  9. Kinetic evaluation and process performance of an upflow anaerobic filter reactor degrading terephthalic acid.

    Science.gov (United States)

    Davutluoglu, Orkun I; Seckin, Galip

    2014-01-01

    The anaerobic degradation of terephthalic acid (TA) as the sole organic carbon source was studied in an upflow anaerobic filter (UAF) reactor. The reactor was seeded with biomass obtained from a full-scale upflow anaerobic sludge bed (UASB) reactor and was used to treat wastewater from a petrochemical facility producing dimethyl terephthalate. The UAF reactor was operated for 252 d with a constant hydraulic retention time of 24 h, and the organic loading rate (OLR) was gradually increased from 1 to 10 g-chemical oxygen demand (COD)/L d. After a lag period of approximately 40 d, the COD removal efficiency increased exponentially and high removal rate values (≈90%) were obtained, except for at highest OLR (10 g-COD/L d). The high removal rates and the robustness of the reactor performance could be attributed to the formation of biofilm as well as granular sludge. The methane production rates (0.22 to 2.15 L/d) correlated well with the removed OLRs (0.3 to 6.8 g-COD/L d) during the various phases of treatment, indicating that the main mechanism of TA degradation occurs via methanogenic reactions. The average methane content of the produced biogas was 70.3%. The modified Stover-Kincannon model was found to be applicable for the anaerobic degradation of TA in UAFs (Umax = 64.5, KB = 69.1 g-COD/L d and Ymax = 0.27 L-CH4/g-CODremoved). These results suggest that UAF reactors are among the most effective reactor configurations for the anaerobic degradation of TA.

  10. Simultaneous dioxin and mercury collection in a filter bed reactor; Process concepts and test results. Simultane Dioxin- und Quecksilberabscheidung im Filterschichtreaktor; Verfahrenskonzepte und Versuchsergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Weirich, W. (Deutsche Babcock Anlagen GmbH, Oberhausen (Germany)); Glinka, U. (Deutsche Babcock Anlagen GmbH, Oberhausen (Germany)); Ruther, G. (Deutsche Babcock Anlagen GmbH, Oberhausen (Germany))

    1993-03-01

    In the process chain dealt with in this paper, which uses a combined SCR reactor and filter bed reactor where the most far-reaching catalytic destruction of NO[sub x] and dioxins is obtained, the filter bed reactor was operated as a pilot plant using an inexpensive additive with multiple recycling. (orig.)

  11. Anaerobic treatment performance and microbial population of thermophilic upflow anaerobic filter reactor treating awamori distillery wastewater.

    Science.gov (United States)

    Tang, Yue-Qin; Fujimura, Yutaka; Shigematsu, Toru; Morimura, Shigeru; Kida, Kenji

    2007-10-01

    Distillery wastewater from awamori making was anaerobically treated for one year using thermophilic upflow anaerobic filter (UAF) reactors packed with pyridinium group-containing nonwoven fabric material. The microbial structure and spatial distribution of microorganisms on the support material were characterized using molecular biological methods. The reactor steadily achieved a high TOC loading rate of 18 g/l/d with approximately 80% TOC removal efficiency when non-diluted wastewater was fed. The maximum TOC loading rate increased to 36 g/l/d when treating thrice-diluted wastewater. However, the TOC removal efficiency and gas evolution rate decreased compared with that when non-diluted wastewater was used. Methanogens closely related to Methanosarcina thermophila and Methanoculleus bourgensis and bacteria in the phyla Firmicutes and Bacteroidetes were predominant methanogens and bacteria in the thermophilic UFA reactor, as indicated by 16S rRNA gene clone analysis. Fluorescence in situ hybridization (FISH) results showed that a large quantity of bacterial cells adhered throughout the whole support, and Methanosarcina-like methanogens existed mainly in the relative outside region while Methanoculleus cells were located in the relative inner part of the support. The support material used proved to be an excellent carrier for microorganisms, and a UAF reactor using this kind of support can be used for high-rate treatment of awamori/shochu distillery wastewater.

  12. Experimentation on the anaerobic filter reactor for biogas production using rural domestic wastewater

    Science.gov (United States)

    Leju Celestino Ladu, John; Lü, Xi-wu; Zhong, Zhaoping

    2017-08-01

    The biogas production from anaerobic filter (AF) reactor was experimented in Taihu Lake Environmental Engineering Research Center of Southeast University, Wuxi, China. Two rounds of experimental operations were conducted in a laboratory scale at different Hydraulic retention time (HRT) and wastewater temperature. The biogas production rate during the experimentation was in the range of 4.63 to 11.78 L/d. In the first experimentation, the average gas production rate was 10.08 L/d, and in the second experimentation, the average gas production rate was 4.97 L/d. The experimentation observed the favorable Hydraulic Retention Time and wastewater temperature in AF was three days and 30.95°C which produced the gas concentration of 11.78 L/d. The HRT and wastewater temperature affected the efficiency of the AF process on the organic matter removal and nutrients removal as well. It can be deduced from the obtained results that HRT and wastewater temperature directly affects the efficiency of the AF reactor in biogas production. In conclusion, anaerobic filter treatment of organic matter substrates from the rural domestic wastewater increases the efficiency of the AF reactor on biogas production and gives a number of benefits for the management of organic wastes as well as reduction in water pollution. Hence, the operation of the AF reactor in rural domestic wastewater treatment can play an important element for corporate economy of the biogas plant, socio-economic aspects and in the development of effective and feasible concepts for wastewater management, especially for people in rural low-income areas.

  13. Filter/moderator system for a BNCT beam of epithermal neutrons at nuclear reactor MARIA

    Science.gov (United States)

    Tyminska, Katarzyna

    2009-01-01

    Boron Neutron Capture Therapy is a very promising form of cancer therapy, consisting in irradiating a stable isotope of boron (10B) concentrated in tumor cells with a low energy neutron beam. This technique makes it possible to destroy tumor cells, leaving healthy tissues practically unaffected. In order to carry out the therapy in the proper way, the proper range of the neutron beam energy has to be chosen. In this paper we present a filter/moderator system modeled with MCNP code in order to obtain an epithermal neutron beam for BNCT post at MARIA reactor in Swierk.

  14. Determining Pu-239 content by resonance transmission analysis using a filtered reactor beam.

    Energy Technology Data Exchange (ETDEWEB)

    Klann, R. T.

    1998-11-25

    A novel technique has been developed at Argonne National Laboratory to determine the {sup 239}Pu content in EBR-II blanket elements using resonance transmission analysis (RTA) with a filtered reactor beam. The technique uses cadmium and gadolinium filters along with a {sup 239}Pu fission chamber to isolate the 0.3 eV resonance in {sup 239}Pu. In the energy range from 0.1 to 0.5 eV, the total microscopic cross-section of {sup 239}Pu is significantly larger than the cross-sections of {sup 238}U and {sup 235}U. This large difference in cross-section allows small amounts of {sup 239}Pu to be detected in uranium samples. Tests using a direct beam from a 250 kW TRIGA reactor have been performed with stacks of depleted uranium and {sup 239}Pu foils. Preliminary measurement results are in good agreement with the predicted results up to about two weight percent of {sup 239}Pu in the sample. In addition, measured {sup 239}Pu masses were in agreement with actual sample masses with uncertainties less than 3.8 percent.

  15. 沸石-陶粒BAF处理微污染水源水的影响因素研究%On the influencing factors of zeolite-ceramics biological aerated filter (BAF) in treating slightly polluted raw water

    Institute of Scientific and Technical Information of China (English)

    刘金香; 娄金生; 陈春宁

    2007-01-01

    探讨沸石-陶粒BAF工艺对微污染水源水中CODMn、氨氮、UV254、浊度等污染物质的去除效果.通过模型试验,研究了填料高度、水力负荷、气水比等因素对沸石-陶粒曝气生物滤池(BAF)工艺处理效果的影响.结果表明,在水力负荷为1.2~4.8 m3/(m2·h)、气水比为1时,CODMn、氨氮、UV254和浊度的去除率随填料层高度的增加而增加,其中CODMn、UV254、浊度的去除在最初的440 mm内最为显著,而氨氮的去除在220~440 mm范围内较明显; 在气水比为1,水力负荷分别为1.2 m3/(m2·h)、2.4 m3/(m2·h)和4.8 m3/(m2·h)时,CODMn的总去除率分别为38.62%、32.23%和25.37%,较合适的水力负荷为1.2 m3/(m2·h); 在水力负荷为1.2 m3/(m2·h)、气水比由0.5增为1时,CODMn的平均去除率由26.34%增为36.31%,氨氮的平均去除率由78.15%增为94.4%,当气水比增大为2时,CODMn、氨氮的去除率增加很少,合适的气水比为1.研究表明,沸石-陶粒BAF工艺处理微污染水源水的效果良好,且所需的填料高度小,气水比低.

  16. The application of moving bed biofilm reactor to denitrification process after trickling filters.

    Science.gov (United States)

    Kopec, Lukasz; Drewnowski, Jakub; Kopec, Adam

    2016-12-01

    The paper presents research of a prototype moving bed biofilm reactor (MBBR). The device was used for the post-denitrification process and was installed at the end of a technological system consisting of a septic tank and two trickling filters. The concentrations of suspended biomass and biomass attached on the EvU Perl moving bed surface were determined. The impact of the external organic carbon concentration on the denitrification rate and efficiency of total nitrogen removal was also examined. The study showed that the greater part of the biomass was in the suspended form and only 6% of the total biomass was attached to the surface of the moving bed. Abrasion forces between carriers of the moving bed caused the fast stripping of attached microorganisms and formation of flocs. Thanks to immobilization of a small amount of biomass, the MBBR was less prone to leaching of the biomass and the occurrence of scum and swelling sludge. It was revealed that the maximum rate of denitrification was an average of 0.73 gN-NO(3)/gDM·d (DM: dry matter), and was achieved when the reactor was maintained in external organic carbon concentration exceeding 300 mgO2/dm(3) chemical oxygen demand. The reactor proved to be an effective device enabling the increase of total nitrogen removal from 53.5% to 86.0%.

  17. The developmental and pathogenic roles of BAF57, a special subunit of the BAF chromatin-remodeling complex.

    Science.gov (United States)

    Lomelí, Hilda; Castillo-Robles, Jorge

    2016-06-01

    Mammalian SWI/SNF or BAF chromatin-remodeling complexes are polymorphic assemblies of homologous subunit families that remodel nucleosomes. BAF57 is a subunit of the BAF complexes; it is encoded only in higher eukaryotes and is present in all mammalian assemblies. Its main structural feature is a high-mobility group domain, the DNA-binding properties of which suggest that BAF57 may play topological roles as the BAF complex enters or exits the nucleosome. BAF57 displays specific interactions with a number of proteins outside the BAF complex. Through these interactions, it can accomplish specific functions. In the embryo, BAF57 is responsible for the silencing of the CD4 gene during T-cell differentiation, and during the repression of neuronal genes in non-neuronal cells, BAF57 interacts with the transcriptional corepressor, Co-REST, and facilitates repression. Extensive work has demonstrated a specific role of BAF57 in regulating the interactions between BAF and nuclear hormone receptors. Despite its involvement in oncogenic pathways, new generation sequencing studies do not support a prominent role for BAF57 in the initiation of cancer. On the other hand, evidence has emerged to support a role for BAF57 as a metastasis factor, a prognosis marker and a therapeutic target. In humans, BAF57 is associated with disease, as mutations in this gene predispose to important congenital disorders, including menigioma disease or the Coffin-Siris syndrome. In this article, we present an exhaustive analysis of the BAF57 molecular and biochemical properties, cellular functions, loss-of-function phenotypes in living organisms and pathological manifestations in cases of human mutations.

  18. Characterization of filter cartridges from the IEA-R1 reactor by radiochemical method

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Bianca; Vicente, Roberto; Ferreira, Robson J.; Goes, Marcos M.; Marumo, Julio T., E-mail: bgeraldo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The filter cartridges used in water purification system of research nuclear reactor IEA-R1 are considered radioactive wastes after their useful life. The characterization of these wastes is one of the stages of management, which aims to identify and quantify the radionuclides present, including those known as 'difficult to measure' (DTM) radionuclides. Establish a radiochemical analysis methodology for this type of waste is a difficult job, not only by the application of these techniques, but also by the amount of radionuclides that should be analyzed. In the waste produced in a nuclear reactor, the most important radionuclides are fission products, activation products and transuranic elements. Since these radionuclides emit gamma radiation not measurable in its decay process and consequently are difficult to measure, their concentrations can be estimated by indirect methods such as scale factors. This method is used to evaluate the DTM concentration, which is represented by alpha and beta nuclides using the correlation between them and the radionuclide key, a gamma emitter. The objective of this work is to describe a radiochemical analysis methodology for gamma emitter nuclides, present in the filter cartridges, evaluating the activity and concentrations by destructive assays. At the same time, two studies have been performed by non-destructive assays, the first one based on dose rates and the point kernel method to correlate the results and the second one based on calibration efficiency with Monte Carlo method. These studies belong to the radioactive waste characterization program that has been conducted at the Waste Management Laboratory of Nuclear and Energy Research Institute, IPEN-CNEN/SP. (author)

  19. Buoyant Filter Bio-Reactor (BFBR)--a novel anaerobic wastewater treatment unit.

    Science.gov (United States)

    Panicker, Soosan J; Philipose, M C; Haridas, Ajit

    2008-01-01

    The Buoyant Filter Bio-Reactor (BFBR) is a novel and very efficient method for the treatment of complex wastewater. Sewage is a complex wastewater containing insoluble COD contributed by fat and proteins. The fat and proteins present in the domestic sewage cause operational problems and underperformance in the Upflow Anaerobic Sludge Blanket Reactor, used now for treating sewage anaerobically. The biogas yield from the BFBR is 0.36 m3/kg COD reduced and the methane content was about 70-80%. Production of methane by anaerobic digestion of organic waste had the benefit of lower energy costs for treatment and is thus environmentally beneficial to the society by providing a clean fuel from renewable feed stocks. The BFBR achieved a COD removal efficiency of 80-90% for an organic loading rate of 4.5 kg/m3/d at a hydraulic retention time of 3.25 hours. The effluent COD was less than 100 mg/l, thus saving on secondary treatment cost. No pretreatment like sedimentation was required for the influent to the BFBR. The BFBR can produce low turbidity effluent as in the activated sludge process (ASP). The land area required for the BFBR treatment plant is less when compared to ASP plant. Hence the problem of scarcity of land for the treatment plant is reduced. The total expenditure for erecting the unit was less than 50% as that of conventional ASP for the same COD removal efficiency including land cost.

  20. Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment.

    Science.gov (United States)

    Ma, Teng-Fei; Chen, You-Peng; Kang, Jia; Gao, Xu; Guo, Jin-Song; Fang, Fang; Zhang, Xiao-Tian

    2016-12-01

    Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).

  1. The Reduced Rank of Ensemble Kalman Filter to Estimate the Temperature of Non Isothermal Continue Stirred Tank Reactor

    Directory of Open Access Journals (Sweden)

    Erna Apriliani

    2011-01-01

    Full Text Available Kalman filter is an algorithm to estimate the state variable of dynamical stochastic system. The square root ensemble Kalman filter is an modification of Kalman filter. The square root ensemble Kalman filter is proposed to keep the computational stability and reduce the computational time. In this paper we study the efficiency of the reduced rank ensemble Kalman filter. We apply this algorithm to the non isothermal continue stirred tank reactor problem. We decompose the covariance of the ensemble estimation by using the singular value decomposition (the SVD, and then we reduced the rank of the diagonal matrix of those singular values. We make a simulation by using Matlab program. We took some the number of ensemble such as 100, 200 and 500. We compared the computational time and the accuracy between the square root ensemble Kalman filter and the ensemble Kalman filter. The reduced rank ensemble Kalman filter can’t be applied in this problem because the dimension of state variable is too less.

  2. Treatment of domestic wastewater by modified zeolite as BAF filters%改性沸石作为BAF填料处理生活污水的研究

    Institute of Scientific and Technical Information of China (English)

    赵雪锋; 王欣

    2012-01-01

    沸石分子筛因其特殊的结构特性对氨氮具有较高的吸附性能.将天然斜发沸石在250℃下高温改性,并用于含氨氮溶液的等温吸附处理,获得了在不同氨氮初始质量浓度下的改性沸石等温吸附曲线.根据朗格缪尔吸附理论拟合得到改性沸石的等温吸附方程1/qe=7.58986/Ce+0.13739,并求得其对氨氮的理论最大吸附量qm为7.278 6 mg/g.通过对沸石曝气生物滤池系统在不同水力负荷和气水比条件下的运行研究,总结出改性斜发沸石作为曝气生物滤池工艺的最佳水力负荷为0.15 ~0.25m3/(m2·h),气水比为20∶1.%Because of special structure characters, zeolite has high adsorption rate of ammonia nitrogen. The natural clinoptilolite was modified under 250℃ high temperature and used in isothermal adsorption of ammonia nitrogen contained solutions. Much isothermal adsorption curves were got in terms of different ammonia nitrogen initial concentrations. According to Langmuir adsorption theory, the Langmuir adsorption isotherm equation was that 1/qe =7. 589 86/Ce +0.137 39, which the most theoretical adsorption capacity qm was 7. 278 6 mg/ g. Through the operation of the zeolite biological aerated filter system under different hydraulic load rates and gas-water rate, the optimum operational parameters were given out with hydraulic load rates of 0. 15 ~0. 25 m3/m2·h and gas-water rate of 20:1.

  3. Effect of application rates and media types on nitrogen and surfactant removal in trickling filters applied to the post-treatment of effluents from UASB reactors

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, P. G. S. de; Taveres, F. v. F.; Chernicharo, C. A. I.

    2009-07-01

    Tricking filters are a very promising alternative for the post treatment of effluents from UASB reactors treating domestic sewage,especially in developing countries. Although a fair amount of information is already available regarding organic mater removal in this combined system, very little is known in relation to nitrogen and surfactant removal in trickling filters post-UASB reactors. Therefore, the purpose of this study was to evaluate and compare the effect evaluate and compare the effect of different application rates and packing media types on trickling filters applied to the post-treatment of effluents from UASB reactors, regarding the removal of ammonia nitrogen and surfactants. (Author)

  4. Arsenic and fluoride removal from groundwater by electrocoagulation using a continuous filter-press reactor.

    Science.gov (United States)

    Guzmán, Athziri; Nava, José L; Coreño, Oscar; Rodríguez, Israel; Gutiérrez, Silvia

    2016-02-01

    We investigated simultaneous arsenic and fluoride removal from ground water by electrocoagulation (EC) using aluminum as the sacrificial anode in a continuous filter-press reactor. The groundwater was collected at a depth of 320 m in the Bajío region in Guanajuato Mexico (arsenic 43 µg L(-1), fluoride 2.5 mg L(-1), sulfate 89.6 mg L(-1), phosphate 1.8 mg L(-1), hydrated silica 112.4 mg L(-1), hardness 9.8 mg L(-1), alkalinity 31.3 mg L(-1), pH 7.6 and conductivity 993 µS cm(-1)). EC was performed after arsenite was oxidized to arsenate by addition of 1 mg L(-1) hypochlorite. The EC tests revealed that at current densities of 4, 5 and 6 mA cm(-2) and flow velocities of 0.91 and 1.82 cm s(-1), arsenate was abated and residual fluoride concentration satisfies the WHO standard (CF < 1.5 mg L(-1)). Spectrometric analyses performed on aluminum flocs indicated that these are mainly composed of aluminum-silicates of calcium and magnesium. Arsenate removal by EC involves adsorption on aluminum flocs, while fluoride replaces a hydroxyl group from aluminum aggregates. The best EC was obtained at 4 mA cm(-2) and 1.82 cm s(-1) with electrolytic energy consumption of 0.34 KWh m(-3).

  5. Process of nitrogen transformation and microbial community structure in the Fe(0)-carbon-based bio-carrier filled in biological aerated filter.

    Science.gov (United States)

    Deng, Shihai; Li, Desheng; Yang, Xue; Zhu, Shanbin; Li, Jinlong

    2016-04-01

    Nitrogen pollutants in low-organic carbon wastewater are difficult to biodegrade. Therefore, the Fe(0)-carbon-based bio-carrier (FCBC) was firstly used as hydrogen producer in a biological-aerated filter (BAF) to make up for the lack of organic carbon in biological nitrogen removal. Physical and chemical properties of FCBC were detected and compared in this study. The nitrogen removal rate for low COD/TN ratio wastewater, nitrogen transformation process, and microbial communities in the FCBC filled in BAF were investigated. Results showed that the nitrogen removal rates was 0.38-0.41 kg N m(-3) day(-1) in the FCBC filled BAF and reached 0.62 kg N m(-3) day(-1) within the filter depth of 60-80 cm, under the conditions of the dissolved oxygen 3.5 ± 0.2 mg L(-1) and the inlet pH 7.2 ± 0.1. Hydrogenophaga (using hydrogen as electron donor), Sphaerotilus (absorbing [Fe(3+)]), Nitrospira (nitrificaion), and Nitrosomonas (ammonia oxidation) were found to be the predominant genera in the reactor. The reaction schemes in the FCBC filled in BAF was calculated: hydrogen and [Fe(3+)] were produced by Fe(0)-C galvanic cells in the FCBC, ammonia was oxidized into nitrate by Nitrosomonas and Nitrospira genera, hydrogen was used as electron donors by Hydrogenophaga genus to reduce nitrate into N2, and [Fe(3+)] was partly absorbed by Sphaerotilus and diverted via sludge discharging.

  6. The Buoyant Filter Bioreactor: a high-rate anaerobic reactor for complex wastewater--process dynamics with dairy effluent.

    Science.gov (United States)

    Haridas, Ajit; Suresh, S; Chitra, K R; Manilal, V B

    2005-03-01

    A novel high-rate anaerobic reactor, called "Buoyant Filter Bioreactor" (BFBR), has been developed for treating lipid-rich complex wastewater. The BFBR is able to decouple the biomass and insoluble COD retention time from the hydraulic retention time by means of a granular filter bed made of buoyant polystyrene beads. Filter clogging is prevented by an automatic backwash driven by biogas release, which fluidizes the granular filter bed in a downward direction. During filter backwash, the solids captured in the filter are reintroduced into the reaction zone of the reactor. The reaction zone is provided with a mixing system, which is independent of the hydraulic retention time. The performance of a laboratory-scale BFBR was studied for the treatment of dairy effluent, chosen as a model complex wastewater. The dairy effluent was not pre-treated for fat removal. The BFBR was operated over 400 d and showed greater than 85% COD removal at 10 kg COD/(m3/d). The COD conversion to methane in the BFBR was essentially complete. The BFBR performance improved with age, and with feed containing 3200 mg COD/l, the treated effluent had 120 mg COD/l and no turbidity. The hold-up of degradable biosolids, including scum, inside the BFBR was estimated using starvation tests. When load is increased, scum accumulates inside the BFBR and then decays after undergoing change from hydrophobic to hydrophilic. This is explained as the accumulation of fat solids, its conversion to insoluble long chain fatty acids and its further solubilization and degradation.

  7. Electrochemical incineration of vinasse in filter-press-type FM01-LC reactor using 3D BDD electrode.

    Science.gov (United States)

    Nava, J L; Recéndiz, A; Acosta, J C; González, I

    2008-01-01

    This work shows results obtained in the electrochemical incineration of a synthetic vinasse with initial chemical oxygen demand (COD) of 75.096 g L(-1) in aqueous media (which resembles vinasse industrial wastewater). Electrolyses in a filter-press-type FM01-LC electrochemical reactor equipped with a three-dimensional (3D) boron doped diamond electrode (BDD) were performed at Reynolds values between 22 BDD surface. Experimental data revealed that hydrodynamic conditions slightly influence the vinasse degradation rate and current efficiency, indicating that the oxidation involves a complex pathway. IWA Publishing 2008.

  8. Removal of pharmaceuticals, polybrominated flame retardants and UV-filters from sludge by the fungus Trametes versicolor in bioslurry reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Rodriguez, Carlos E. [Unitat Asociada de Biocatalisi Aplicada IQAC-CSIC, Escola d' Enginyeria, Universitat Autonoma de Barcelona, 08193 Bellaterra, Barcelona (Spain); Centro de Investigacion en Contaminacion Ambiental, Universidad de Costa Rica, 2060 San Jose (Costa Rica); Baron, Enrique; Gago-Ferrero, Pablo; Jelic, Aleksandra; Llorca, Marta; Farre, Marinella; Diaz-Cruz, M. Silvia; Eljarrat, Ethel [Department of Environmental Chemistry, Institute of Environmental Assessment and Water Research (IDAEA), Spanish Council for Scientific Research (CSIC), Jordi Girona 18-26, 08034 Barcelona (Spain); Petrovic, Mira [Institucio Catalana de Reserca i Estudis Avancats (ICREA), Passeig Lluis Companys 23, 80010 Barcelona (Spain); Catalan Institute for Water Research (ICRA), H2O Building, Scientific and Technological Park of the University of Girona, 101-E-17003 Girona (Spain); Caminal, Gloria, E-mail: Gloria.Caminal@uab.cat [Unitat Asociada de Biocatalisi Aplicada IQAC-CSIC, Escola d' Enginyeria, Universitat Autonoma de Barcelona, 08193 Bellaterra, Barcelona (Spain); Barcelo, Damia [Department of Environmental Chemistry, Institute of Environmental Assessment and Water Research (IDAEA), Spanish Council for Scientific Research (CSIC), Jordi Girona 18-26, 08034 Barcelona (Spain); Catalan Institute for Water Research (ICRA), H2O Building, Scientific and Technological Park of the University of Girona, 101-E-17003 Girona (Spain); King Saud University (KSU), P.O. Box 2455, 11451 Riyadh (Saudi Arabia); and others

    2012-09-30

    Highlights: Black-Right-Pointing-Pointer Sludge from a WWTP was treated in a fungal slurry reactor with Trametes versicolor. Black-Right-Pointing-Pointer Twenty-four pharmaceuticals were removed at important extents. Black-Right-Pointing-Pointer UV-filters and brominated flame retardants were also degraded. Black-Right-Pointing-Pointer Overall toxicity of sludge increased despite the pollutant removal. - Abstract: Conventional wastewater treatments are inefficient in the removal of many organic pollutants. The presence of these contaminants in the final sludge represents a source of environmental pollution due to the increasing use of biosolids in land application. A biotechnological approach which employed the fungus Trametes versicolor in a sludge-bioslurry reactor was assessed in order to remove several groups of emerging pollutants. Biological fungal activity was monitored by means of ergosterol and laccase determinations. Fifteen out of 24 detected pharmaceuticals were removed at efficiencies over 50% after the treatment, including eight completely degraded. Removal ranged between 16-53% and 22-100% for the brominated flame retardants and the UV-filters, respectively. Only two of all the detected compounds remained unchanged after the treatment. Although elimination results are promising, the toxicity of the final sludge increased after the treatment. This finding is contrary to the toxicity results obtained in similar treatments of sludge with T. versicolor in solid-phase.

  9. Reduction of COD and Turbidity of Effluent in the Swine Productions Unit Employing Anaerobic Baffled Reactor (ABR Followed by Biological Filters and Sand Filter

    Directory of Open Access Journals (Sweden)

    Euzebio Beli

    2010-04-01

    Full Text Available The growing swine production is constantly in conflict with the environment due to the lack of environmental management directed to the cycle of animal production and the industrial sector, mainly due to the mishandling of slurry produced. In association with large concentrations of confined animals appear huge dumps of organic matter, inorganic nutrients and gaseous emissions, which require special care for its disposal to the environment. The aim of this study was to evaluate the use of an anaerobic baffled reactor (ABR in series with two downflow biological filters, followed by a sand filter as a polishing treatment. It were analyzed the reduction of COD and turbidity, and the behavior of pH in all phases of treatment. The removal of COD in the conjugated system, which occurred during treatment ranged from 74.55% to 94.41% with an average removal of 84.24%. In turn, the removal of turbidity from the period ranged from 53.07% to 96.11% with an average removal of 85.49%. In the studied period the pH changed from 5,6 to 8,4. This system was efficient in the removal of COD and turbidity of swine wastewater.

  10. Performance of an Anaerobic Baffled Filter Reactor in the Treatment of Algae-Laden Water and the Contribution of Granular Sludge

    OpenAIRE

    Yaqin Yu; Xiwu Lu; Yifeng Wu

    2014-01-01

    This study investigated the performance and stability of an anaerobic baffled filter reactor in the treatment of algae-laden water from Taihu Lake at several organic loading rates. The study also evaluated the capability of soft filler to train granule sludge and improve the anaerobic environment and sludge activity in the anaerobic baffled reactor (ABR), thereby enhancing the treatment efficiency. The ABR consisted of five rectangular compartments, each of which was 120 cm long, 80 cm wide, ...

  11. Comparative performance of fixed-film biological filters: Application of reactor theory

    Science.gov (United States)

    Watten, B.J.; Sibrell, P.L.

    2006-01-01

    Nitrification is classified as a two-step consecutive reaction where R1 represents the rate of formation of the intermediate product NO2-N and R2 represents the rate of formation of the final product NO3-N. The relative rates of R1 and R2 are influenced by reactor type characterized hydraulically as plug-flow, plug-flow with dispersion and mixed-flow. We develop substrate conversion models for fixed-film biofilters operating in the first-order kinetic regime based on application of chemical reactor theory. Reactor type, inlet conditions and the biofilm kinetic constants Ki (h-1) are used to predict changes in NH4-N, NO2-N, NO3-N and BOD5. The inhibiting effects of the latter on R1 and R2 were established based on the ?? relation, e.g.:{A formula is presented}where BOD5,max is the concentration that causes nitrification to cease and N is a variable relating Ki to increasing BOD5. Conversion models were incorporated in spreadsheet programs that provided steady-state concentrations of nitrogen and BOD5 at several points in a recirculating aquaculture system operating with input values for fish feed rate, reactor volume, microscreen performance, make-up and recirculating flow rates. When rate constants are standardized, spreadsheet use demonstrates plug-flow reactors provide higher rates of R1 and R2 than mixed-flow reactors thereby reducing volume requirements for target concentrations of NH4-N and NO2-N. The benefit provided by the plug-flow reactor varies with hydraulic residence time t as well as the effective vessel dispersion number, D/??L. Both reactor types are capable of providing net increases in NO2-N during treatment but the rate of decrease in the mixed-flow case falls well behind that predicted for plug-flow operation. We show the potential for a positive net change in NO2-N increases with decreases in the dimensionless ratios K2, (R2 )/K1,( R1 ) and [NO2-N]/[NH4-N] and when the product K1, (R1) t provides low to moderate NH4-N conversions. Maintaining

  12. Pilot-plant testing of magnetic filters for the N-Reactor primary cooling circuit

    Energy Technology Data Exchange (ETDEWEB)

    Emory, B.B.

    1982-01-01

    Data obtained during the laboratory loop test program using the high power HGMF indicates that removal efficiency for /sup 60/Co and subsequently the bulk of the crud, will be greater than 90% at field strength above .1 Tesla for the expanded metal mesh matrix. However, since /sup 54/Mn seems to exhibit paramagnetic behavior and the possibility of quantities of alpha iron forming during reactor shut down from oxygen inleakage, a field strength of .5 to 1 Tesla may be more appropriate for a full scale on-reactor installation. Crud loading of 50 gm per kg of matrix weight are readily obtainable and up to twice that amount has been reached.

  13. Performance of an Anaerobic Baffled Filter Reactor in the Treatment of Algae-Laden Water and the Contribution of Granular Sludge

    Directory of Open Access Journals (Sweden)

    Yaqin Yu

    2014-01-01

    Full Text Available This study investigated the performance and stability of an anaerobic baffled filter reactor in the treatment of algae-laden water from Taihu Lake at several organic loading rates. The study also evaluated the capability of soft filler to train granule sludge and improve the anaerobic environment and sludge activity in the anaerobic baffled reactor (ABR, thereby enhancing the treatment efficiency. The ABR consisted of five rectangular compartments, each of which was 120 cm long, 80 cm wide, 80 cm high, and packed with soft filler. The anaerobic baffled filter reactor was found to be an efficient reactor configuration for the treatment of algae-laden water. The reactor was operated at an organic loading rate of 1.5 kg chemical oxygen demand (COD/(m3d and an ambient temperature of 30 °C; under these conditions, the COD removal efficiency was 80% and the biogas production rate was 293 mL/(Ld. Moreover, the soft filler increased the biomass retention time and decreased the rate at which solids were washed out from the reactor, promoting an improved spatial distribution of the microbial communities within the compartments. Methanoregula, Methanobacteriaceae, Methanosaeta, Methanoculleu, and Thermogymnomonas were the dominant archaeal species in each compartment during an operational period of approximately 100 days. The protease activity in the reactor decreased longitudinally down the reactor from Compartments 1 to 5, whereas the activity of coenzyme F420 increased. The soft filler played a key role in successfully treating algae-laden water with the anaerobic baffled filter reactor.

  14. A 4p BaF2 detector for (n,g) cross section measurements at a spallation neutron source

    CERN Document Server

    Heil, M; Fowler, M M; Haight, R C; Käppeler, F; Rundberg, R S; Seabury, E H; Ullmann, J L; Wilhelmy, J B; Wisshak, K

    2013-01-01

    The quest for improved neutron capture cross sections for advanced reactor concepts, transmutation of radioactive wastes as well as for astrophysical scenarios of neutron capture nucleosynthesis has motivated new experimental efforts based on modern techniques. Recent measurements in the keV region have shown that a 4p BaF2 detector represents an accurate and versatile instrument for such studies. The present work deals with the potential of such a 4p BaF2 detector in combination with spallation neutron sources, which offer large neutron fluxes over a wide energy range. Detailed Monte Carlo simulations with the GEANT package have been performed to investigate the critical backgrounds at a spallation facility, to optimize the detector design, and to discuss alternative solutions.

  15. 不同曝气位置曝气生物滤池(BAF)处理对虾养殖污水的试验研究%Biological Aerated Filters of Different Aeration Locations for Wastewater Treatment During Litopenaeus vannamei Culture

    Institute of Scientific and Technical Information of China (English)

    陈强; 黎中宝; 张艳艳; 王晨晨; 王超; 于凌宇

    2012-01-01

    采用不同曝气位置的上向流生物滤池处理对虾养殖污水,连续运行30 d,分析出水水质,并观察系统运行情况和装置污染状况.考察了对虾养殖污水中化学需氧量、氨氮、硝酸盐氮、亚硝酸盐氮、无机氮及活性磷酸盐6项指标的去除效果.结果表明:从养殖污水主要污染物指标的去除效果上看,中下部曝气生物滤池(MUBAF)要优于底部曝气生物滤池(BUBAF).在系统进水化学需氧量质量浓度为7.62~8.20 mg· L-1,氨氮质量浓度为0.62~0.65 mg·L-1,硝酸盐氮质量浓度为0.54~0.59 mg·L-1,亚硝酸盐氮质量浓度为0.23~0.27 mg· L-1,无机氮质量浓度为1.40~1.47 mg·L-1,活性磷酸盐质量浓度为0.24~0.29 mg·L-1,水温为25℃~30 ℃时,中下部曝气生物滤池对养殖污水中6项指标的去除率分别为45.2%、88.9%、58.5%、78.8%、75.3%和25.1%.可见,对氨氮的去除效果最佳,亚硝酸盐氮和无机氮次之,化学需氧量和硝酸盐氮的去除效果较差,活性磷酸盐去除率最低.总体而言,曝气生物滤池在水产养殖污水应用中处理效果明显,具有可行性和实用性.%In this paper, the up-flow biological aerated filter of middle aeration Location( MUBAF) and up-flow biological aerated filter of bottom aeration Location( BUBAF) were adopted to treat aquacultural wastewater of Litopenaeus vannamei. The water quality indexes such as chemical oxygen demand(COD), ammonia nitrogen(NH3-N), nitrate nitrogen(NO3-N), nitrite nitrogen(NOi-N), inorganic nitrogen (DIN) and soluble reactive phosphates( P04-P) were measured and analysed during 30 days processing. The study focused on the effect of the purification characteristics for aquacultural wastewater. Both the operating condition and the polluted condition of the wastewater treatment were also observed. The results showed that the removal rates of pollutants above using MUBAF were superior than that using BUBAF. When the temperature was

  16. Nitrifying-denitrifying filters and UV-C disinfection reactor: a combined system for wastewater treatment.

    Science.gov (United States)

    Ben Rajeb, Asma; Mehri, Inès; Nasr, Houda; Najjari, Afef; Saidi, Neila; Hassen, Abdennaceur

    2017-03-01

    Biological treatment systems use the natural processes of ubiquitous organisms to remove pollutants and improve the water quality before discharge to the environment. In this paper, the nitrification/denitrification reactor allowed a reduction in organic load, but offered a weak efficiency in nitrate reduction. However, the additions of the activated sludge in the reactor improve this efficiency. A decrease of [Formula: see text] values from 13.3 to 8 mg/l was noted. Nevertheless, sludge inoculation led to a net increase of the number of pathogenic bacteria. For this reason, a UV-C pilot reactor was installed at the exit of the biological nitrification-denitrification device. Thus, a fluence of 50 mJ.cm(-2) was sufficient to achieve values of 20 MPN/100 ml for fecal coliform and 6 MPN/100 ml for fecal streptococci, conforms to Tunisian Standards of Rejection. On the other hand, the DGGE approach has allowed a direct assessment of the bacterial community changes upon the treated wastewater.

  17. Characterization of an electrochemical pilot-plant filter-press reactor by hydrodynamic and mass transport studies

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, J.; Frias, A.; Exposito, E.; Montiel, V.; Aldaz, A.; Conesa, J.A.

    2000-05-01

    This work deals with the study of the influence of turbulence promoters in the hydrodynamic and mass transport behavior of a pilot-plant filter-press electrolyzer (a homemade UA200.08 with a 200 cm{sup 2} electrode area) in an undivided configuration. A simple experimental arrangement was used to generate data from electrolytic conductivity measurements in a series of impulse-response experiments. The presence and type of turbulence promoters influence the flow distribution inside the reactor. A new design of a model (presented in a previous work) has been used to analyze the residence time distributions. In this study a new parameter, the turbulence factor, given as N{sub {alpha}}{Phi}{sub {beta}}, was employed to classify the turbulence promoters. The optimization of the parameters indicates that the correct model is dispersed plug-flow behavior with a low axial dispersion that considers exchange between the dead and main zones of the reactor. It is also very interesting to highlight that the information obtained by means of the turbulence factors is similar to that obtained from the values of the mass transport coefficients measured using the limiting current technique.

  18. BAF180 regulates cellular senescence and hematopoietic stem cell homeostasis through p21.

    Science.gov (United States)

    Lee, Hyemin; Dai, Fangyan; Zhuang, Li; Xiao, Zhen-Dong; Kim, Jongchan; Zhang, Yilei; Ma, Li; You, M James; Wang, Zhong; Gan, Boyi

    2016-04-12

    BAF180 (also called PBRM1), a subunit of the SWI/SNF complex, plays critical roles in the regulation of chromatin remodeling and gene transcription, and is frequently mutated in several human cancers. However, the role of mammalian BAF180 in tumor suppression and tissue maintenance in vivo remains largely unknown. Here, using a conditional somatic knockout approach, we explored the cellular and organismal functions of BAF180 in mouse. BAF180 deletion in primary mouse embryonic fibroblasts (MEFs) triggers profound cell cycle arrest, premature cellular senescence, without affecting DNA damage response or chromosomal integrity. While somatic deletion of BAF180 in adult mice does not provoke tumor development, BAF180 deficient mice exhibit defects in hematopoietic system characterized by progressive reduction of hematopoietic stem cells (HSCs), defective long-term repopulating potential, and hematopoietic lineage developmental aberrations. BAF180 deletion results in elevated p21 expression in both MEFs and HSCs. Mechanistically, we showed that BAF180 binds to p21 promoter, and BAF180 deletion enhances the binding of modified histones associated with transcriptional activation on p21 promoter. Deletion of p21 rescues cell cycle arrest and premature senescence in BAF180 deficient MEFs, and partially rescues hematopoietic defects in BAF180 deficient mice. Together, our study identifies BAF180 as a critical regulator of cellular senescence and HSC homeostasis, which is at least partially regulated through BAF180-mediated suppression of p21 expression. Our results also suggest that senescence triggered by BAF180 inactivation may serve as a failsafe mechanism to restrain BAF180 deficiency-associated tumor development, providing a conceptual framework to further understand BAF180 function in tumor biology.

  19. Knockdown Brm and Baf170, components of chromatin remodeling complex, facilitates reprogramming of somatic cells

    Science.gov (United States)

    The SWI/SNF (SWItch/Sucrose NonFermentable or BAF, Brg/Brahma-associated factors) complexes are epigenetic modifiers of chromatin structure and undergo progressive changes in subunit composition during cellular differentiation. For example, in embryonic stem cells (ESCs) esBAF contains Brg1 and Baf...

  20. Reactor

    Science.gov (United States)

    Evans, Robert M.

    1976-10-05

    1. A neutronic reactor having a moderator, coolant tubes traversing the moderator from an inlet end to an outlet end, bodies of material fissionable by neutrons of thermal energy disposed within the coolant tubes, and means for circulating water through said coolant tubes characterized by the improved construction wherein the coolant tubes are constructed of aluminum having an outer diameter of 1.729 inches and a wall thickness of 0.059 inch, and the means for circulating a liquid coolant through the tubes includes a source of water at a pressure of approximately 350 pounds per square inch connected to the inlet end of the tubes, and said construction including a pressure reducing orifice disposed at the inlet ends of the tubes reducing the pressure of the water by approximately 150 pounds per square inch.

  1. Removal of estrogenic compounds from filtered secondary wastewater effluent in a continuous enzymatic membrane reactor. Identification of biotransformation products.

    Science.gov (United States)

    Lloret, Lucia; Eibes, Gemma; Moreira, M Teresa; Feijoo, Gumersindo; Lema, Juan M

    2013-05-07

    In the present study, a novel and efficient technology based on the use of an oxidative enzyme was developed to perform the continuous removal of estrogenic compounds from polluted wastewaters. A 2 L enzymatic membrane reactor (EMR) was successfully operated for 100 h with minimal requirements of laccase for the transformation of estrone (E1), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2)from both buffer solution and real wastewater (filtered secondary effluent). When the experiments were performed at high and low concentrations of the target compounds, 4 mg/L and 100 μg/L, not only high removal yields (80-100%) but also outstanding reduction of estrogenicity (about 84-95%) were attained. When the EMR was applied for the treatment of municipal wastewaters with real environmental concentrations of the different compounds (0.29-1.52 ng/L), excellent results were also achieved indicating the high efficiency and potential of the enzymatic reactor system. A second goal of this study relied on the identification of the transformation products to elucidate the catalytic mechanism of estrogens' transformation by laccase. The formation of dimers and trimers of E1, E2, and EE2, as well as the decomposition of E2 into E1 by laccase-catalyzed treatment, has been demonstrated by liquid chromatography atmospheric pressure chemical ionization (LC-APCI) analysis and confirmed by determination of accurate masses through liquid chromatography electrospray time-of-flight mass spectrometry (LC-ESI-TOF). Dimeric products of E2 and EE2 were found even when operating at environmental concentrations. Moreover, the reaction pathways of laccase-catalyzed transformation of E2 were proposed.

  2. Effects of hydraulic retention time and nitrobenzene concentration on the performance of sequential upflow anaerobic filter and air lift reactors in treating nitrobenzene-containing wastewater

    DEFF Research Database (Denmark)

    Wu, Jinhua; Chen, Guocai; Gu, Jingjing;

    2014-01-01

    Sequential upflow anaerobic filter (UAF)/air lift (ALR) reactors were employed to investigate the effects of hydraulic retention time (HRT) and nitrobenzene (NB) concentration on treatment of NB-containing wastewater. The results showed that NB was effectively reduced to aniline (AN) with glucose...... and the influent NB concentration increased from 400 to 800 mg l super(-1), respectively. The results showed that sequential UAF/ALR system can be operated at low HRTs and high NB concentrations without significantly affecting the removal efficiency of NB in the reactor system. The UAF/ALR system can provide...... an effective yet low cost method for treatment of NB-containing industrial wastewater....

  3. Removal of nitrogen and phosphorus in a combined A2/O-BAF system with a short aerobic SRT

    Institute of Scientific and Technical Information of China (English)

    DING Yong-wei; WANG Lin; WANG Bao-zhen; WANG Zheng

    2006-01-01

    A bench-scale anaerobic/anoxic/aerobic process-biological aerated filter (A2/O-BAF) combined system was carried out to treat wastewater with lower C/N and C/P ratios. The A2/O process was operated in a short aerobic sludge retention time (SRT) for organic pollutants and phosphorus removal, and denitrification. The subsequent BAF process was mainly used for nitrification. The BAF effluent was partially returned to anoxic zone of the A2/O process to provide electron acceptors for denitrification and anoxic P uptake. This unique system formed an environment for reproducing the denitrifying phosphate-accumulating organisms (DPAOs). The ratio of DPAOs to phosphorus accumulating organisms (PAOs) could be maintained at 28% by optimizing the organic loads in the anaerobic zone and the nitrate loads into the anoxic zone in the A2/O process. The aerobic phosphorus over-uptake and discharge of excess activated sludge was the main mechanism of phosphorus removal in the combined system. The aerobic SRT of the A2/O process should meet the demands for the development of aerobic PAOs and the restraint on the nitrifiers growth, and the contact time in the aerobic zone of the A2/O process should be longer than 30 min, which ensured efficient phosphorus removal in the combined system. The adequate BAF effluent retum rates should be controlled with 1-4 mg/L nitrate nitrogen in the anoxic zone effluent of A2/O process to achieve the optimal nitrogen and phosphorus removal efficiencies.

  4. Spectrum evaluation at the filter-modified neutron irradiation field for neutron capture therapy in Kyoto University Research Reactor

    Science.gov (United States)

    Sakurai, Yoshinori; Kobayashi, Tooru

    2004-10-01

    The Heavy Water Neutron Irradiation Facility of the Kyoto University Research Reactor (KUR-HWNIF) was updated in March 1996, mainly to improve the facility for neutron capture therapy (NCT). In this facility, neutron beams with various energy spectra, from almost pure thermal to epithermal, are available. The evaluation of the neutron energy spectra by multi-activation-foil method was performed as a series of the facility characterization. The spectra at the normal irradiation position were evaluated for the combinations of heavy-water thickness of the spectrum shifter and the open-close condition of the cadmium and boral filters. The initial spectra were made mainly using a two-dimensional transport code, and the final spectra were obtained using an adjusting code. For the verification of the evaluated spectra, simulation calculations using a phantom were performed on the assumption of NCT-clinical-irradiation conditions. It resulted that the calculated data for the depth neutron-flux distributions were in good agreement with the experimental ones.

  5. Start-up and steady-state conditions of an Anaerobic Hybrid Reactor (AHR) using mini-filters composed with two types of support medium operating under low loading rates

    National Research Council Canada - National Science Library

    Silva, Vivian Galdino da; Campos, Cláudio Milton Montenegro; Pereira, Erlon Lopes; Silva, Júlia Ferreira da

    2011-01-01

    ...) removing organic matter of coffee wastewater with low concentration. The AHR was built similar to an UASB reactor, however the interior was filled with mini-filters composed by two types of support materials...

  6. Radioactive contamination of BaF2 crystal scintillator

    CERN Document Server

    Polischuk, O G; Bernabei, R; Cappella, F; Caracciolo, V; Cerulli, R; Di Marco, A; Danevich, F A; Incicchitti, A; Poda, D V; Tretyak, V I

    2013-01-01

    Barium fluoride (BaF$_2$) crystal scintillators are promising detectors to search for double beta decay processes in $^{130}$Ba ($Q_{2{\\beta}}$ = 2619(3) keV) and $^{132}$Ba ($Q_{2{\\beta}}$ = 844(1) keV). The $^{130}$Ba isotope is of particular interest because of the indications on 2${\\beta}$ decay found in two geochemical experiments. The radioactive contamination of BaF$_2$ scintillation crystal with mass of 1.714 kg was measured over 113.4 hours in a low-background DAMA/R&D set-up deep underground (3600 m w.e.) at the Gran Sasso National Laboratories of INFN (LNGS, Italy). The half-life of $^{212}$Po (present in the crystal scintillator due to contamination by radium) was estimated as $T_{1/2}$ = 298.8 $\\pm$ 0.8(stat.) $\\pm$ 1.4(syst.) ns by analysis of the events pulse profiles.

  7. 7SK-BAF axis controls pervasive transcription at enhancers.

    Science.gov (United States)

    Flynn, Ryan A; Do, Brian T; Rubin, Adam J; Calo, Eliezer; Lee, Byron; Kuchelmeister, Hannes; Rale, Michael; Chu, Ci; Kool, Eric T; Wysocka, Joanna; Khavari, Paul A; Chang, Howard Y

    2016-03-01

    RNA functions at enhancers remain mysterious. Here we show that the 7SK small nuclear RNA (snRNA) inhibits enhancer transcription by modulating nucleosome position. 7SK occupies enhancers and super enhancers genome wide in mouse and human cells, and it is required to limit enhancer-RNA initiation and synthesis in a manner distinct from promoter pausing. Clustered elements at super enhancers uniquely require 7SK to prevent convergent transcription and DNA-damage signaling. 7SK physically interacts with the BAF chromatin-remodeling complex, recruits BAF to enhancers and inhibits enhancer transcription by modulating chromatin structure. In turn, 7SK occupancy at enhancers coincides with that of Brd4 and is exquisitely sensitive to the bromodomain inhibitor JQ1. Thus, 7SK uses distinct mechanisms to counteract the diverse consequences of pervasive transcription that distinguish super enhancers, enhancers and promoters.

  8. BaF2 TIME DIFFERENTIAL PERTURBED ANGULAR DISTRIBUTION SPECTROMETER

    Institute of Scientific and Technical Information of China (English)

    朱升云; 勾振辉; 等

    1994-01-01

    A BaF2 time differential perturbed angular distribution spectrometer has been established at the HI-13 tandem accelerator in CIAE.The time resolution of the spectrometer is 195ps and the nonlinearity is less than 2%.The spectrometer works very stably and no time drift is found over a period of experimental runs.This spectrometer has been successfully used in the g-factor measurement of 43Sc(19/2-,3.1232MeV).

  9. baf(x)dx=∫baf(a+b-x)dx的应用初探%Exploration of the Application of ∫baf(x) dx = ∫baf(a+ b - x ) dx

    Institute of Scientific and Technical Information of China (English)

    吴琼

    2003-01-01

    本文从两个方面对等式∫baf(x)dx=∫bafa+b-x)dx的应用做了一些初步探讨,这两方面分别为:运用这个等式证明一些积分等式,以及证明一些不易求解的三角函数积分.

  10. Using a biological aerated filter to treat mixed water-borne volatile organic compounds and assessing its emissions

    Institute of Scientific and Technical Information of China (English)

    CHENG Wen-Hsi

    2009-01-01

    A biological aerated filter (BAF) was evaluated as a fixed-biofilm processes to remove water-borne volatile organic compounds (VOCs) from a multiple layer ceramic capacitor (MLCC) manufacturing plant in southern Taiwan.The components of VOC were identified to be toluene,1,2,4-trimethylbenzene,1,3,5-trimethylbenzene,bromodichloromethane and isopropanol (IPA).The full-scale BAF was constructed of two separate reactors in series,respectively using 10-cm and 15-cm diameter polypropylene balls as the packing materials and a successful preliminary bench-scale experiment was performed to feasibility.Performance results show that the BAF removed over 90% chemical oxygen demand (COD) from the influent with (1188 ± 605) mg/L of COD.A total organic loading of 2.76 kg biochemical oxygen demand (BOD)/(m~3 packing·d) was determined for the packed bed,in which the flow pattern approached that of a mixed flow.A limited VOC concentration of (0.97 ± 0.29) ppmv (as methane) was emitted from the BAF system.Moreover,the emission rate of VOC was calculated using the proposed formula,based on an air-water mass equilibrium relationship,and compared to the simulated results obtained using the Water 9 model.Both estimation approaches of calculation and model simulation using Water 9 evaluating VOC emissions reveal that 0.1% IPA (0.0031-0.0037 kg/d) was aerated into a gaseous phase,and 30% to 40% (0.006-0.008 kg/d) of the toluene was aerated.

  11. Method to identify potential phosphorus rate-limiting conditions in post-denitrification biofilm reactors within systems designed for simultaneous low-level effluent nitrogen and phosphorus concentrations.

    Science.gov (United States)

    Boltz, Joshua P; Morgenroth, Eberhard; Daigger, Glen T; deBarbadillo, Christine; Murthy, Sudhir; Sørensen, Kim H; Stinson, Beverly

    2012-12-01

    Water-quality standards requiring simultaneous low level effluent N and P concentrations are increasingly common in Europe and the United States of America. Moving bed biofilm reactors (MBBRs) and biologically active filters (BAFs) have been used as post-denitrification biofilm reactors in processes designed and operated for this purpose (Boltz et al., 2010a). There is a paucity of information describing systematic design and operational protocols that will minimize the potential for phosphorus rate-limited conditions as well as a lack of information describing the interaction between these post-denitrification biofilm reactors and unit processes that substantially alter phosphorus speciation (e.g., chemically enhanced clarification). In this paper, a simple mathematical model for estimating the threshold below which P becomes rate-limiting, and the model is presented and evaluated by comparing its predictions with operational data from post-denitrification MBBRs and BAFs. Ortho-phosphorus (PO(4)-P), which is the dissolved reactive component of total phosphorus, was a primary indicator of P rate-limiting conditions in the evaluated post-denitrification biofilm reactors. The threshold below which PO(4)-P becomes the rate-limiting substrate is defined: S(PO4-P):S(NOx-N) = 0.0086 g P/g N and S(PO4-P):S(M) = 0.0013 g P/g COD. Additional analyses indicate J(NOx-N)(avg) =0.48 g/m2/d when S(PO4-P):S(NOx-N) > 0.0086, and J(NOx-N)(avg) = 0.06 g/m2/d when S(PO4-P):S(NOx-N) clarifiers effluent stream, dosing phosphoric acid in the MBBR or BAF influent stream, and/or optimizing secondary process EBPR may overcome phosphorus rate-limitations in the biofilm-based post-denitrification process. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Performance of digester decant system with biological filter followed by constructed wetland and solar reactor in the treatment of domestic sewage

    Directory of Open Access Journals (Sweden)

    Delfran Batista dos Santos

    2012-08-01

    Full Text Available This study aimed to analyze the performance of digester decant system with biological filter followed by constructed wetland and solar reactor in the treatment of domestic sewage from Milagres rural community in Apodi-RN. The treatment system was monitored for the period of October and November 2010, 48 days after planting Pennisetum purpureum Schumach. Samples of domestic sewage were collected at different stages of treatment, in four replications on time, to determine physicochemical and microbiological characteristics about the system performance. The results indicated significant removal of turbidity, biochemical oxygen demand, chemical oxygen demand, total solids, suspended solids, phosphorus and oil and grease using the set digester decant with biological filter, followed by constructed wetland and solar reactor; the association of average solar radiation of 28.73 MJ m-2 d-1, effluent depth of 0.10 m on reactor and time of sun exposure of 12 hours provided removal of fecal coliform up to 99.99% of domestic sewage in Apodi, RN, the treated effluent met microbiological standard of the Brazilian guidelines for agricultural use with restrictions.

  13. mSWI/SNF (BAF) Complexes Are Indispensable for the Neurogenesis and Development of Embryonic Olfactory Epithelium.

    Science.gov (United States)

    Bachmann, Christina; Nguyen, Huong; Rosenbusch, Joachim; Pham, Linh; Rabe, Tamara; Patwa, Megha; Sokpor, Godwin; Seong, Rho H; Ashery-Padan, Ruth; Mansouri, Ahmed; Stoykova, Anastassia; Staiger, Jochen F; Tuoc, Tran

    2016-09-01

    Neurogenesis is a key developmental event through which neurons are generated from neural stem/progenitor cells. Chromatin remodeling BAF (mSWI/SNF) complexes have been reported to play essential roles in the neurogenesis of the central nervous system. However, whether BAF complexes are required for neuron generation in the olfactory system is unknown. Here, we identified onscBAF and ornBAF complexes, which are specifically present in olfactory neural stem cells (oNSCs) and olfactory receptor neurons (ORNs), respectively. We demonstrated that BAF155 subunit is highly expressed in both oNSCs and ORNs, whereas high expression of BAF170 subunit is observed only in ORNs. We report that conditional deletion of BAF155, a core subunit in both onscBAF and ornBAF complexes, causes impaired proliferation of oNSCs as well as defective maturation and axonogenesis of ORNs in the developing olfactory epithelium (OE), while the high expression of BAF170 is important for maturation of ORNs. Interestingly, in the absence of BAF complexes in BAF155/BAF170 double-conditional knockout mice (dcKO), OE is not specified. Mechanistically, BAF complex is required for normal activation of Pax6-dependent transcriptional activity in stem cells/progenitors of the OE. Our findings unveil a novel mechanism mediated by the mSWI/SNF complex in OE neurogenesis and development.

  14. BAF200 is required for heart morphogenesis and coronary artery development.

    Directory of Open Access Journals (Sweden)

    Lingjuan He

    Full Text Available ATP-dependent SWI/SNF chromatin remodeling complexes utilize ATP hydrolysis to non-covalently change nucleosome-DNA interactions and are essential in stem cell development, organogenesis, and tumorigenesis. Biochemical studies show that SWI/SNF in mammalian cells can be divided into two subcomplexes BAF and PBAF based on the subunit composition. ARID2 or BAF200 has been defined as an intrinsic subunit of PBAF complex. However, the function of BAF200 in vivo is not clear. To dissect the possible role of BAF200 in regulating embryogenesis and organ development, we generated BAF200 mutant mice and found they were embryonic lethal. BAF200 mutant embryos exhibited multiple cardiac defects including thin myocardium, ventricular septum defect, common atrioventricular valve, and double outlet right ventricle around E14.5. Moreover, we also detected reduced intramyocardial coronary arteries in BAF200 mutants, suggesting that BAF200 is required for proper migration and differentiation of subepicardial venous cells into arterial endothelial cells. Our work revealed that PBAF complex plays a critical role in heart morphogenesis and coronary artery angiogenesis.

  15. The new readout electronics for the BaF2-calorimeter TAPS

    NARCIS (Netherlands)

    Drexler, P; Thoring, U; Bonn, W; van der Duin, HAP; Holzmann, R; van der Kruk, G; Krusche, B; Lohner, H; Metag, [No Value; Nijboer, TW; Novotny, R; Potapov, A; Salz, C; Schadmand, S; Steinacher, M; Thiel, M; Vorenholt, H

    2003-01-01

    A highly compact and fast VME based readout board for BaF2 scintillation detectors has been designed, developed, and finally tested in an in-beam experiment. Adapted to the excellent properties of BaF2, the unit allows to digitize time, energy, and pulse-shape information of four detector channels i

  16. The new readout electronics for the BaF2-calorimeter TAPS

    NARCIS (Netherlands)

    Drexler, P; Thoring, U; Bonn, W; van der Duin, HAP; Holzmann, R; van der Kruk, G; Krusche, B; Lohner, H; Metag, [No Value; Nijboer, TW; Novotny, R; Potapov, A; Salz, C; Schadmand, S; Steinacher, M; Thiel, M; Vorenholt, H

    A highly compact and fast VME based readout board for BaF2 scintillation detectors has been designed, developed, and finally tested in an in-beam experiment. Adapted to the excellent properties of BaF2, the unit allows to digitize time, energy, and pulse-shape information of four detector channels

  17. A unique missense allele of BAF155, a core BAF chromatin remodeling complex protein, causes neural tube closure defects in mice.

    Science.gov (United States)

    Harmacek, Laura; Watkins-Chow, Dawn E; Chen, Jianfu; Jones, Kenneth L; Pavan, William J; Salbaum, J Michael; Niswander, Lee

    2014-05-01

    Failure of embryonic neural tube closure results in the second most common class of birth defects known as neural tube defects (NTDs). While NTDs are likely the result of complex multigenic dysfunction, it is not known whether polymorphisms in epigenetic regulators may be risk factors for NTDs. Here we characterized Baf155(msp3) , a unique ENU-induced allele in mice. Homozygous Baf155(mps3) embryos exhibit highly penetrant exencephaly, allowing us to investigate the roles of an assembled, but malfunctional BAF chromatin remodeling complex in vivo at the time of neural tube closure. Evidence of defects in proliferation and apoptosis were found within the neural tube. RNA-Seq analysis revealed that surprisingly few genes showed altered expression in Baf155 mutant neural tissue, given the broad epigenetic role of the BAF complex, but included genes involved in neural development and cell survival. Moreover, gene expression changes between individual mutants were variable even though the NTD was consistently observed. This suggests that inconsistent gene regulation contributes to failed neural tube closure. These results shed light on the role of the BAF complex in the process of neural tube closure and highlight the importance of studying missense alleles to understand epigenetic regulation during critical phases of development.

  18. Comparative study on nutrient removal of agricultural non-point source pollution for three filter media filling schemes in eco-soil reactors.

    Science.gov (United States)

    Du, Fuyi; Xie, Qingjie; Fang, Longxiang; Su, Hang

    2016-08-01

    Nutrients (nitrogen and phosphorus) from agricultural non-point source (NPS) pollution have been increasingly recognized as a major contributor to the deterioration of water quality in recent years. The purpose of this article is to investigate the discrepancies in interception of nutrients in agricultural NPS pollution for eco-soil reactors using different filling schemes. Parallel eco-soil reactors of laboratory scale were created and filled with filter media, such as grit, zeolite, limestone, and gravel. Three filling schemes were adopted: increasing-sized filling (I-filling), decreasing-sized filling (D-filling), and blend-sized filling (B-filling). The systems were intermittent operations via simulated rainstorm runoff. The nutrient removal efficiency, biomass accumulation and vertical dissolved oxygen (DO) distribution were defined to assess the performance of eco-soil. The results showed that B-filling reactor presented an ideal DO for partial nitrification-denitrification across the eco-soil, and B-filling was the most stable in the change of bio-film accumulation trends with depth in the three fillings. Simultaneous and highest removals of NH4(+)-N (57.74-70.52%), total nitrogen (43.69-54.50%), and total phosphorus (42.50-55.00%) were obtained in the B-filling, demonstrating the efficiency of the blend filling schemes of eco-soil for oxygen transfer and biomass accumulation to cope with agricultural NPS pollution.

  19. Investigating the role of co-substrate-substrate ratio and filter media on the performance of anammox hybrid reactor treating nitrogen rich wastewater.

    Science.gov (United States)

    Tomar, Swati; Gupta, Sunil Kumar

    2016-03-01

    This study explored the feasibility of using the anammox hybrid reactor (AHR), which combines suspended and attached growth media, for the biodegradation of ammonical nitrogen in wastewater. The study was performed in four laboratory-scale AHRs, inoculated with mixed seed culture (1:1). The anammox process was established by feeding the AHR with synthetic wastewater, containing NH(4)-N and NO(2)-N (1:1), at hydraulic retention time (HRT) of 1 day. The reactors were gradually acclimated to a higher ammonium concentration (1200 mg/l) until the pseudo-steady state was attained. Subsequently, the reactors were operated at various HRTs (0.25-3.0 days) to optimize the HRT and nitrogen loading rate (NLR). The study demonstrated that HRT of 1 day, corresponding to 95.1% of nitrogen removal was optimal. Pearson correlation analysis indicated the strong and positive correlation of HRT and sludge retention time (SRT), whereas the NLR and biomass yield correlated negatively with the nitrogen removal efficiency (NRE). The mass balance of nitrogen showed that a major fraction (79.1%) of the input nitrogen was converted into N2 gas, and 11.25% was utilized in synthesizing the biomass. The filter media in the AHR contributed to an additional 15.4% of ammonium removal and a reduction of 29% in the sludge washout rate. The nitrogen removal kinetics in the AHR followed the modified Stover-Kincannon model, whereas the Lawrence-McCarty model best described the bacterial growth kinetics. The study concludes that the hybrid configuration of the reactor demonstrated promising results and could be suitably applied for industrial applications. Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  20. Micro-reactor for heterogeneous catalysis. Applications: hydrogen storage in hydrocarbons and filter for gas sensor; Microreacteur pour la catalyse heterogene: applications: stockage d'hydrogene dans les hydrocarbures: filtre pour capteur gaz

    Energy Technology Data Exchange (ETDEWEB)

    Roumanie, M

    2005-10-15

    This manuscript presents the design and the use of silicon micro-structured reactor for heterogeneous catalysis and especially for the dehydrogenation of methyl-cyclohexane reaction. This reaction enables on one hand to store hydrogen and on the other hand to realize technological developments since it is endothermic and difficult to carry out. By consequence, a new micro-reactor obtained by DRIE was designed and capped with a Pyrex wafer. It bundles micro-heaters deposited by screen-printing and a high temperature metallic connection. It comprises either a catalyst coming from micro-technology, Pt film deposited by sputtering or a classic catalyst, platinum supported on alumina. For this last catalyst, the micro-reactor previously pre-oxidized is pretreated by oxygen plasma or liquid way so that the deposit to walls. The wash coat could be done in open micro-reactor by dip coating in the suspension or in closed micro-reactor under vacuum or by liquid circulation. After catalytic tests realised in a macro-reactor, the Pt/Al{sub 2}O{sub 3} catalyst was chosen to be inserted in the micro-reactor. The catalytic tests realised in a micro-reactor coupled with a mass spectrometer let to show the presence of hydrogen. In parallel, the micro-reactor was used as filter to improve gas sensor selectivity. (author)

  1. Vibrational spectra of (BaF2)n (n=1-6) clusters

    Science.gov (United States)

    Pandey, Ratnesh K.; Waters, Kevin; Nigam, Sandeep; Pandey, Ravindra; Pandey, Avinash C.

    2016-05-01

    The vibrational properties of alkaline-earth metal fluoride clusters (BaF2)n (n=1-6) are investigated in the framework of density functional theory. The calculated Raman and Infrared (IR) spectra reveals shift in Raman and IR peak position towards lower frequency region with the increase in the cluster size. Further the calculated spectra have been compared with the experimental vibrational spectra of bulk BaF2 crystal. Even though the smaller size cluster lacks translational symmetry, the structural and vibrational characteristic of (BaF2)5-6 are nearer to bulk counterpart.

  2. Electrochemical incineration of indigo. A comparative study between 2D (plate) and 3D (mesh) BDD anodes fitted into a filter-press reactor.

    Science.gov (United States)

    Nava, José L; Sirés, Ignasi; Brillas, Enric

    2014-01-01

    This paper compares the performance of 2D (plate) and 3D (mesh) boron-doped diamond (BDD) electrodes, fitted into a filter-press reactor, during the electrochemical incineration of indigo textile dye as a model organic compound in chloride medium. The electrolyses were carried out in the FM01-LC reactor at mean fluid velocities between 0.9 ≤ u ≤ 10.4 and 1.2 ≤ u ≤ 13.9 cm s(-1) for the 2D BDD and the 3D BDD electrodes, respectively, at current densities of 5.63 and 15 mA cm(-2). The oxidation of the organic matter was promoted, on the one hand, via the physisorbed hydroxyl radicals (BDD(·OH)) formed from water oxidation at the BDD surface and, on the other hand, via active chlorine formed from the oxidation of chloride ions on BDD. The performance of 2D BDD and 3D BDD electrodes in terms of current efficiency, energy consumption, and charge passage during the treatments is discussed.

  3. Enzymatic oxidation of cephalosporin C using whole cells of the yeast Triginopsis variabilis within a "cross-flow filter-reactor".

    Science.gov (United States)

    Vicenzi, J T; Hansen, G J

    1993-04-01

    An economical process for the enzymatic oxidation of cephalosporin C to glutaryl-7-ACA was developed at a pilot plant scale. The process utilized nonviable whole cells of the yeast Triginopsis variabilis containing high levels of D-amino acid oxidase. Prior to use, the whole cells were permeabilized with a 25% acetone/water solution which enhanced their apparent activity by 20- to 50-fold. After permeabilization, the whole cells were incubated at pH 11, which served to selectively deactivate catalase which was present in very large quantities. Deactivation of catalase was critical to achieving high reaction yields. The whole cells were utilized within a "cross-flow filter-reactor" which allowed easy and economical recycle of the cells for repeated use. The overall yield of glutaryl-7-ACA from cephalosporin C was 90-95%. The overall productivity of the yeast was 13 kg cephalosporin C oxidized per kilogram yeast (dry basis). The reaction was run at a concentration of 40 g cephalosporin CL-1 and the overall reactor productivity was 11 g glutaryl-7-ACA l-1 h-1. The process has been thoroughly demonstrated on a 35-l scale, and it should be directly scaleable to 10,000 l or more.

  4. A performance evaluation of a new iron oxide-based porous ceramsite (IPC) in biological aerated filters.

    Science.gov (United States)

    Bao, Teng; Chen, Tianhu; Ezzatahmadi, Naeim; Rathnayake, Suramya I; Chen, Dong; Wille, Marie-Luise; Frost, Ray

    2017-04-01

    A novel medium containing iron oxide-based porous ceramsite (IPC) and commercial ceramsite (CC) was used in two laboratory-scale upflow biological aerated filters (BAFs) to treat city wastewater to compare their efficacy in wastewater treatment. The IPC BAF and CC BAF were operated in water at 20-26°C, an air/water (A/W) ratio of: 3:1 and hydraulic retention times (HRTs) of 7, 3.5, 1.75, and 0.5 h and the removal of ammonia nitrogen (NH3-N), total nitrogen (TN), total organic carbon (TOC), and phosphorus (P) were studied. Our results indicated that IPC BAF was superior to CC BAF in terms of TOC, TN, NH3-N, and P removal. IPC had higher total porosity and larger total surface area than CC. The interconnected porous structure of IPC was suitable to microbial growth, protozoan, and metazoan organisms were primarily found in the accumulated biofilm layer. Biomass, in the biofilm layer, was detected at three distinct distances (300, 900, and 1500 mm) from the bottom of the inlet filter, again indicating that the IPC was more suitable for biomass growth. The presence of biomass improves the simultaneous removal efficiency of nitrogen and phosphorus in the IPC BAF. Thus, our findings support IPC as a material for use in filter media in wastewater treatment BAFs.

  5. Annual Report for Hybrid Plasma Reactor/Filter for Transportable Collective Protection Systems—Phase 1B

    Energy Technology Data Exchange (ETDEWEB)

    Josephson, Gary B.; Tonkyn, Russell G.; Rappe, Kenneth G.; Frye, John G.

    2009-06-01

    Annual report covering the development of a hybrid nonthermal plasma single-pass filtration system for collective protection. This report covers NTP destruction testing on a high priority Toxic Industrial Material and an surrogate for a sulfur containing chemical agent (e.g. mustard), Effects of catalysts in the nonthermal plasma and catalyst poisoning by the sulfur are presented. Also presented are proof-of-principle data for utilizing ozone created in the NTP as a beneficial reactant to destroy adsorbed contaminants in-situ. Catalysts to decompose the ozone within the adsorbent bed are necessary to convert the adsorber into an ozone reactor.

  6. Luminescence and scintillation properties of BaF2sbnd Ce transparent ceramic

    Science.gov (United States)

    Luo, Junming; Sahi, Sunil; Groza, Michael; Wang, Zhiqiang; Ma, Lun; Chen, Wei; Burger, Arnold; Kenarangui, Rasool; Sham, Tsun-Kong; Selim, Farida A.

    2016-08-01

    Cerium doped Barium Fluoride (BaF2sbnd Ce) transparent ceramic was fabricated and its luminescence and scintillation properties were studied. The photoluminescence shows the emission peaks at 310 nm and 323 nm and is related to the 5d-4f transitions in Ce3+ ion. Photo peak at 511 keV and 1274 keV were obtained with BaF2sbnd Ce transparent ceramic for Na-22 radioisotopes. Energy resolution of 13.5% at 662 keV is calculated for the BaF2sbnd Ce transparent ceramic. Light yield of 5100 photons/MeV was recorded for BaF2sbnd Ce(0.2%) ceramic and is comparable to its single crystal counterpart. Scintillation decay time measurements shows fast component of 58 ns and a relatively slow component of 434 ns under 662 keV gamma excitation. The slower component in BaF2sbnd Ce(0.2%) ceramic is about 200 ns faster than the STE emission in BaF2 host and is associated with the dipole-dipole energy transfer from the host matrix to Ce3+ luminescence center.

  7. The BAH domain of BAF180 is required for PCNA ubiquitination

    Energy Technology Data Exchange (ETDEWEB)

    Niimi, Atsuko [Department of Genome Dynamics, Research Institute of Environmental Medicine, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Hopkins, Suzanna R; Downs, Jessica A [Genome Damage and Stability Centre, University of Sussex, Falmer, Brighton BN1 9RQ (United Kingdom); Masutani, Chikahide, E-mail: masutani@riem.nagoya-u.ac.jp [Department of Genome Dynamics, Research Institute of Environmental Medicine, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan)

    2015-09-15

    Highlights: • The expression of BAF180 promotes UV-induced PCNA ubiquitination during S phase. • The BAH domains of BAF180 alone are sufficient to promote PCNA ubiquitination. • The BAH domains are not assembled into the PBAF in the absence of the C-terminus. - Abstract: Monoubiquitination of proliferating cell nuclear antigen (PCNA) is a critical regulator of post replication repair (PRR). The depletion of BAF180, a unique subunit of the PBAF chromatin remodeling complex in human cells results in reduced PCNA ubiquitination leading to less efficient fork progression following DNA damage, but little is known about the mechanism. Here, we report that the expression of exogenous BAF180 in cells promotes PCNA ubiquitination during S-phase after UV irradiation and it persists for many hours. No correlation was observed between the protein level of ubiquitin-specific protease 1 (USP1) and ubiquitinated PCNA in BAF180 expressing cells. Analysis of cells expressing BAF180 deletion mutants showed that the bromo-adjacent homology (BAH) domains are responsible for this effect. Surprisingly, a deletion construct encoding only the BAH domain region is able to increase the level of ubiquitinated PCNA, even though it is unable to be assembled into the PBAF complex. These results suggest that the ATPase-dependent chromatin remodeling activity of PBAF is not necessary, but instead the BAH domains are sufficient to promote PCNA ubiquitination.

  8. Context-dependent role for chromatin remodeling component PBRM1/BAF180 in clear cell renal cell carcinoma

    Science.gov (United States)

    Murakami, A; Wang, L; Kalhorn, S; Schraml, P; Rathmell, W K; Tan, A C; Nemenoff, R; Stenmark, K; Jiang, B-H; Reyland, M E; Heasley, L; Hu, C-J

    2017-01-01

    A subset of clear cell renal cell carcinoma (ccRCC) tumors exhibit a HIF1A gene mutation, yielding two ccRCC tumor types, H1H2 type expressing both HIF1α and HIF2α, and H2 type expressing HIF2α, but not functional HIF1α protein. However, it is unclear how the H1H2 type ccRCC tumors escape HIF1's tumor-suppressive activity. The polybromo-1 (PBRM1) gene coding for the BAF180 protein, a component of the SWItch/Sucrose Non-Fermentable (SWI/SNF) chromatin remodeling complex, is inactivated in 40% ccRCCs, the function and mechanism of BAF180 mutation is unknown. Our previous study indicates that BAF180-containing SWI/SNF chromatin remodeling complex is a co-activator for transcription factor HIF to induce HIF target genes. Thus, our questions are if BAF180 is involved in HIF-mediated hypoxia response and if PBRM1/BAF180 mutation has any association with the HIF1A retention in H1H2 type ccRCC. We report here that BAF180 is mutated in H1H2 ccRCC cell lines and tumors, and BAF180 re-expression in H1H2 ccRCC cell lines reduced cell proliferation/survival, indicating that BAF180 has tumor-suppressive role in these cells. However, BAF180 is expressed in HIF1-deficient H2 ccRCC cell lines and tumors, and BAF180 knockdown in H2 type ccRCC cell lines reduced cell proliferation/survival, indicating that BAF180 has tumor-promoting activity in these cells. In addition, our data show that BAF180 functions as co-activator for HIF1- and HIF2-mediated transcriptional response, and BAF180's tumor-suppressive and -promoting activity in ccRCC cell lines depends on co-expression of HIF1 and HIF2, respectively. Thus, our studies reveal that BAF180 function in ccRCC is context dependent, and that mutation of PBRM1/BAF180 serves as an alternative strategy for ccRCC tumors to reduce HIF1 tumor-suppressive activity in H1H2 ccRCC tumors. Our studies define distinct functional subgroups of ccRCCs based on expression of BAF180, and suggest that BAF180 inhibition may be a novel therapeutic

  9. SELECTIVE CATALYTIC REDUCTION (SCR OF NO BY AMMONIA OVER V2O5/TiO2 CATALYST IN A CATALYTIC FILTER MEDIUM AND HONEYCOMB REACTOR: A KINETIC MODELING STUDY

    Directory of Open Access Journals (Sweden)

    M. Nahavandi

    2015-12-01

    Full Text Available Abstract The present study addresses a numerical modeling and simulation based on the available knowledge of SCR kinetics for prediction of NO conversion over a V2O3/TiO3 catalyst through a catalytic filter medium and honeycomb reactor. After introducing the NH3-SCR system with specific operational criteria, a reactor model was developed to evaluate the effect of various operating parameters such as flue gas temperature, velocity, NH3/NO molar ratio, etc., on the SCR process. Computational investigations were performed based on the proposed model and optimum operational conditions were identified. Simulation results indicate that SCR performance is substantially under the effects of reactant concentration and operating temperature, so that the concentration of unreacted ammonia emitted from reactor discharge (ammonia slip increases significantly at NH3/NO ratios of more than 1.14 and operating temperatures less than 360 ºC and 300 ºC, respectively, in the catalytic filter medium and honeycomb reactor. The results also show that there are three sections in NO conversion variation versus changing temperature and the required conversion with a maximum of almost 87% and low level of ammonia slip can be achieved at the NH3/NO ratio of 1 and temperature range of 240–360 ºC in both reactors.

  10. Anaerobic acidogenic digestion of olive mill wastewaters in biofilm reactors packed with ceramic filters or granular activated carbon.

    Science.gov (United States)

    Bertin, Lorenzo; Lampis, Silvia; Todaro, Daniela; Scoma, Alberto; Vallini, Giovanni; Marchetti, Leonardo; Majone, Mauro; Fava, Fabio

    2010-08-01

    Four identically configured anaerobic packed bed biofilm reactors were developed and employed in the continuous acidogenic digestion of olive mill wastewaters to produce volatile fatty acids (VFAs), which can be exploited in the biotechnological production of polyhydroxyalkanoates. Ceramic porous cubes or granular activated carbon were used as biofilm supports. Aside packing material, the role of temperature and organic loading rate (OLR) on VFA production yield and mixture composition were also studied. The process was monitored through a chemical, microbiological and molecular biology integrated procedure. The highest wastewater acidification yield was achieved with the ceramic-based technology at 25 degrees C, with an inlet COD and an OLR of about 17 g/L and 13 g/L/day, respectively. Under these conditions, about the 66% of the influent COD (not including its VFA content) was converted into VFAs, whose final amount represented more than 82% of the influent COD. In particular, acetic, propionic and butyric acids were the main VFAs by composing the 55.7, 21.5 and 14.4%, respectively, of the whole VFA mixture. Importantly, the relative concentrations of acetate and propionate were affected by the OLR parameter. The nature of the packing material remarkable influenced the process performances, by greatly affecting the biofilm bacterial community structure. In particular, ceramic cubes favoured the immobilization of Firmicutes of the genera Bacillus, Paenibacillus and Clostridium, which were probably involved in the VFA producing process.

  11. Molecular Dynamics Simulations for Melting Temperatures of SrF2and BaF2

    Institute of Scientific and Technical Information of China (English)

    Xiao-yu Huang; Xin-lu Cheng; Chao-lei Fan; Qiong Chen; Xiao-li Yuan

    2009-01-01

    The shell-model molecular dynamics method was applied to simulate the melting temper-atures of SrF2 and BaF2 at elevated temperatures and high pressures. The same method was used to calculate the equations of state for SrF2 and BaF2 over the pressure range of 0.1 MPa-3 GPa and 0.1 MPa-7 GPa. Compared with previous results for equations of state, the maximum errors are 0.3% and 2.2%, respectively. Considering the pre-melting in the fluorite-type crystals, we made the necessary corrections for the simulated melting temper-atures of SrF2 and BaF2. Consequently, the melting temperatures of SrF2 and BaF2 were obtained for high pressures. The melting temperatures of SrF2 and BaF2 that were obtained by the simulation are in good agreement with available experimental data.

  12. Application of novel Modified Biological Aerated Filter (MBAF) as a promising post-treatment for water reuse: Modification in configuration and backwashing process.

    Science.gov (United States)

    Nikoonahad, Ali; Ghaneian, Mohammad Taghi; Mahvi, Amir Hossein; Ehrampoush, Mohammad Hassan; Ebrahimi, Ali Asghar; Lotfi, Mohammad Hassan; Salamehnejad, Sima

    2017-12-01

    Biological Aerated Filter (BAF) reactors due to their plentiful biomass, high shockability, high efficiency, good filtration, availability and lack of need for large land areas, are enjoying from great importance in advanced wastewater treatment. Therefore, in this study, Polystyrene Coated by Sand (PCS) was produced as a novel media and its application in a modified down-flow BAF structure for advanced wastewater treatment was assessed in two steps. In step one, the backwash effluent did not return to the system, while in step two backwash effluent returned to increase the water reuse efficiency. The backwash process was also studied through three methods of Top Backwashing (TB), Bottom Backwashing (BB), as well as Top and Bottom Backwashing Simultaneously (TBBS). The results showed that return of backwash effluent had no significant effect on the BAF effluent quality. In the second step similar to the first one with slight differences, the residual average concentrations of TSS, BOD5, and COD at the effluent were about 2.5, 8.2, and 25.5 mg/L, respectively. Additionally, in step two, the mean volume of disposal sludge/volume of treated water (vds/vtw) decreased a large extent to about 0.088%. In other words, the water reuse has increased to more than 99.91%. The backwash time in methods of TB and BB were 65 and 35 min, respectively; however, it decreased in TBBS methods to 25 min. The concentrations of most effluent parameters in this system are in concordance with the 2012 EPA Agriculture Standards, even for irrigation of Non-processed agricultural crops and livestock water consumption. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Removal of antibiotics from piggery wastewater by biological aerated filter system: Treatment efficiency and biodegradation kinetics.

    Science.gov (United States)

    Chen, Jun; Liu, You-Sheng; Zhang, Jin-Na; Yang, Yong-Qiang; Hu, Li-Xin; Yang, Yuan-Yuan; Zhao, Jian-Liang; Chen, Fan-Rong; Ying, Guang-Guo

    2017-08-01

    This study aimed to investigate the removal efficiency and mechanism for antibiotics in swine wastewater by a biological aerated filter system (BAF system) in combination with laboratory aerobic and anaerobic incubation experiments. Nine antibiotics including sulfamonomethoxine, sulfachloropyridazine, sulfamethazine, trimethoprim, norfloxacin, ofloxacin, lincomycin, leucomycin and oxytetracycline were detected in the wastewater with concentrations up to 192,000ng/L. The results from this pilot study showed efficient removals (>82%) of the conventional wastewater pollutants (BOD5, COD, TN and NH3-N) and the detected nine antibiotics by the BAF system. Laboratory simulation experiment showed first-order dissipation kinetics for the nine antibiotics in the wastewater under aerobic and anaerobic conditions. The biodegradation kinetic parameters successfully predicted the fate of the nine antibiotics in the BAF system. This suggests that biodegradation was the dominant process for antibiotic removal in the BAF system. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. The Arabidopsis SWI/SNF protein BAF60 mediates seedling growth control by modulating DNA accessibility

    KAUST Repository

    Jégu, Teddy

    2017-06-15

    Plant adaptive responses to changing environments involve complex molecular interplays between intrinsic and external signals. Whilst much is known on the signaling components mediating diurnal, light, and temperature controls on plant development, their influence on chromatin-based transcriptional controls remains poorly explored.In this study we show that a SWI/SNF chromatin remodeler subunit, BAF60, represses seedling growth by modulating DNA accessibility of hypocotyl cell size regulatory genes. BAF60 binds nucleosome-free regions of multiple G box-containing genes, opposing in cis the promoting effect of the photomorphogenic and thermomorphogenic regulator Phytochrome Interacting Factor 4 (PIF4) on hypocotyl elongation. Furthermore, BAF60 expression level is regulated in response to light and daily rhythms.These results unveil a short path between a chromatin remodeler and a signaling component to fine-tune plant morphogenesis in response to environmental conditions.

  15. Luminescent and kinetic properties of the polystyrene composites based on BaF2 nanoparticles

    Science.gov (United States)

    Demkiv, T. M.; Halyatkin, O. O.; Vistovskyy, V. V.; Gektin, A. V.; Voloshinovskii, A. S.

    2016-02-01

    Luminescence-kinetic properties of polystyrene composites based on BaF2 nanoparticles were studied. The electron emission from the nanoparticles due to the photoelectric effect is the main luminescence excitation mechanism in the case of polystyrene composites loaded with small BaF2 nanoparticles (~20 nm). Scintillation pulse of polystyrene composites possesses only fast decay component with the time constant τ~2 ns, and its emission intensity considerably exceeds the one for pure polystyrene scintillator upon the X-ray excitations.

  16. Loss of BAF (mSWI/SNF Complexes Causes Global Transcriptional and Chromatin State Changes in Forebrain Development

    Directory of Open Access Journals (Sweden)

    Ramanathan Narayanan

    2015-12-01

    Full Text Available BAF (Brg/Brm-associated factors complexes play important roles in development and are linked to chromatin plasticity at selected genomic loci. Nevertheless, a full understanding of their role in development and chromatin remodeling has been hindered by the absence of mutants completely lacking BAF complexes. Here, we report that the loss of BAF155/BAF170 in double-conditional knockout (dcKO mice eliminates all known BAF subunits, resulting in an overall reduction in active chromatin marks (H3K9Ac, a global increase in repressive marks (H3K27me2/3, and downregulation of gene expression. We demonstrate that BAF complexes interact with H3K27 demethylases (JMJD3 and UTX and potentiate their activity. Importantly, BAF complexes are indispensable for forebrain development, including proliferation, differentiation, and cell survival of neural progenitor cells. Our findings reveal a molecular mechanism mediated by BAF complexes that controls the global transcriptional program and chromatin state in development.

  17. Mutation of Neuron-Specific Chromatin Remodeling Subunit BAF53b: Rescue of Plasticity and Memory by Manipulating Actin Remodeling

    Science.gov (United States)

    Ciernia, Annie Vogel; Kramár, Enikö A.; Matheos, Dina P.; Havekes, Robbert; Hemstedt, Thekla J.; Magnan, Christophe N.; Sakata, Keith; Tran, Ashley; Azzawi, Soraya; Lopez, Alberto; Dang, Richard; Wang, Weisheng; Trieu, Brian; Tong, Joyce; Barrett, Ruth M.; Post, Rebecca J.; Baldi, Pierre; Abel, Ted; Lynch, Gary; Wood, Marcelo A.

    2017-01-01

    Recent human exome-sequencing studies have implicated polymorphic Brg1-associated factor (BAF) complexes (mammalian SWI/SNF chromatin remodeling complexes) in several intellectual disabilities and cognitive disorders, including autism. However, it remains unclear how mutations in BAF complexes result in impaired cognitive function. Post-mitotic…

  18. X-RAY AND GAMMA-RAY LUMINESCENCE OF CE-3+ DOPED BAF2 CRYSTALS

    NARCIS (Netherlands)

    DORENBOS, P; VISSER, R; VANEIJK, CWE; HOLLANDER, RW; DENHARTOG, HW

    1991-01-01

    The scintillation properties of BaF2 doped with 0.002 to 10 mol% Ce3+ have been studied by means of X-ray and gamma ray excitation. The luminescence intensity increases with the Ce concentration until a maximum is reached for 0.2 mol% doped crystals. The light yield is then about 60% more intense th

  19. X-RAY AND GAMMA-RAY LUMINESCENCE OF CE-3+ DOPED BAF2 CRYSTALS

    NARCIS (Netherlands)

    DORENBOS, P; VISSER, R; VANEIJK, CWE; HOLLANDER, RW; DENHARTOG, HW

    1991-01-01

    The scintillation properties of BaF2 doped with 0.002 to 10 mol% Ce3+ have been studied by means of X-ray and gamma ray excitation. The luminescence intensity increases with the Ce concentration until a maximum is reached for 0.2 mol% doped crystals. The light yield is then about 60% more intense

  20. Response of BaF sub 2 and YAP:Ce to heavy ions

    CERN Document Server

    Klamra, W; Moszynski, M; Norlin, L O; Novák, D; Possnert, G

    2000-01-01

    The light output and energy resolution for BaF sub 2 and YAP:Ce have been measured with sup 1 sup 6 O, sup 3 sup 5 Cl and sup 7 sup 9 Br in the energy region 8.5-34 MeV. Both crystals show a nonproportional light yield response, mostly pronounced for the lighter ions.

  1. Response of MEDEA BaF 2 detectors to 20-280 MeV photons

    Science.gov (United States)

    Bellia, G.; Alba, R.; Coniglione, R.; Del Zoppo, A.; Finocchiaro, P.; Maiolino, C.; Migneco, E.; Piattelli, P.; Sapienza, P.; Frascaria, N.; Lhenry, I.; Roynette, J. C.; Suomijärvi, T.; Alamanos, N.; Auger, F.; Gillibert, A.; Pierroutsakou, D.; Sida, J. L.; Silveira Gomes, P. R.

    1993-05-01

    The response function of MEDEA BaF 2 crystals to high energy photons, up to 280 MeV, has been studied using monochromatic γ-rays from the in flight annihilation of positron beams. The experimental response functions are compared to the results of Monte Carlo simulations based on the EGS3 code and parametrized over the whole investigated energy range.

  2. In-Situ Conductivity Measurement of BaF2 under High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    HAO Ai-Min; LI Xiao-Dong; LIU Jing; GAO Chun-Xiao; LI Ming; HE Chun-Yuan; HUANG Xiao-Wei; ZHANG Dong-Mei; YU Cui-Ling; ZOU Guang-Tian; LI Yan-Chun

    2006-01-01

    @@ We perform the in-situ conductivity measurement on BaF2 at high pressure using a microcircuit fabricated on a diamond anvil cell. The results show that BaF2 initially exhibits the electrical property of an insulator at pressure below 25 Gpa, it transforms to a wide energy gap semiconductor at pressure from 25 to 30 Gpa, and the conductivity increases gradually with increasing pressure from 30 Gpa. However, the metallization predicted by theoretical calculation at 30-33 Gpa cannot be observed. In addition, we measure the temperature dependence of the conductivity at several pressures and obtain the relationship between the energy gap and pressure. Based on the experimental data, it is predicted that BaF2 would transform to a metal at about 87 Gpa and ambient temperature. The conductivity of BaF2 reaches the order of 10-3Ω-1 cm-1 at 37 Gpa and 2400 K, the superionic conduction is not observed during the experiments, indicating the application of pressure elevates greatly the transition temperature of the superionic conduction.

  3. Ba/F3 cells and their use in kinase drug discovery.

    Science.gov (United States)

    Warmuth, Markus; Kim, Sungjoon; Gu, Xiang-ju; Xia, Gang; Adrián, Francisco

    2007-01-01

    Due to their ability to function as dominant oncogenes, protein kinases have become favored targets in the quest for 'molecularly-targeted' cancer chemotherapeutics. The discovery of a large number of cancer-associated mutations in the kinome, and the progress in developing specific small-molecule kinase inhibitors has increased the need for accurate, reproducible, and efficient kinase activity-dependent cellular assay systems. Ba/F3, a murine interleukin-3 dependent pro-B cell line is increasingly popular as a model system for assessing both the potency and downstream signaling of kinase oncogenes, and the ability of small-molecule kinase inhibitors to block kinase activity. Facilitated by their growth properties, Ba/F3 cells have recently been adapted to high-throughput assay formats for compound profiling. Further, several published approaches show promise in predicting resistance to small-molecule kinase inhibitors elicited by point mutations interfering with inhibitor binding. Ba/F3 cells are an increasingly popular tool in kinase drug discovery. The ability to test the transforming capacity of newly identified kinase mutations, and to profile drug candidates and compound libraries in high-throughput fashion, combined with the use of Ba/F3 cells to predict clinical resistance will greatly facilitate developments in this field.

  4. Nuclear Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hogerton, John

    1964-01-01

    This pamphlet describes how reactors work; discusses reactor design; describes research, teaching, and materials testing reactors; production reactors; reactors for electric power generation; reactors for supply heat; reactors for propulsion; reactors for space; reactor safety; and reactors of tomorrow. The appendix discusses characteristics of U.S. civilian power reactor concepts and lists some of the U.S. reactor power projects, with location, type, capacity, owner, and startup date.

  5. Clock distribution for BaF2 readout electronics at CSNS-WNS

    Science.gov (United States)

    He, Bing; Cao, Ping; Zhang, De-Liang; Wang, Qi; Zhang, Ya-Xi; Qi, Xin-Cheng; An, Qi

    2017-01-01

    A BaF2 (Barium Fluoride) detector array is designed to precisely measure the (n, γ) cross section at the CSNS-WNS (white neutron source at China Spallation Neutron Source). It is a 4π solid angle-shaped detector array consisting of 92 BaF2 crystal elements. To discriminate signals from the BaF2 detector, a pulse shape discrimination method is used, supported by a waveform digitization technique. There are 92 channels for digitizing. The precision and synchronization of clock distribution restricts the performance of waveform digitizing. In this paper, a clock prototype for the BaF2 readout electronics at CSNS-WNS is introduced. It is based on the PXIe platform and has a twin-stage tree topology. In the first stage, clock is synchronously distributed from the tree root to each PXIe crate through a coaxial cable over a long distance, while in the second stage, the clock is further distributed to each electronic module through a PXIe dedicated differential star bus. With the help of this topology, each tree node can fan out up to 20 clocks with 3U size. Test results show the clock jitter is less than 20 ps, which meets the requirements of the BaF2 readout electronics. Besides, this clock system has the advantages of high density, simplicity, scalability and cost saving, so it can be useful for other clock distribution applications. Supported by National Research and Development plan (2016 YFA0401602) NSAF (U1530111) and National Natural Science Foundation of China (11005107)

  6. Combined Application of UV Photolysis and Ozonation with Biological Aerating Filter in Tertiary Wastewater Treatment

    Directory of Open Access Journals (Sweden)

    Zhaoqian Jing

    2012-01-01

    Full Text Available To enhance the biodegradability of residual organic pollutants in secondary effluent of wastewater treatment plants, UV photolysis and ozonation were used in combination as pretreatment before a biological aerating filter (BAF. The results indicated that UV photolysis could not remove much COD (chemical oxygen demand, and the performance of ozonation was better than the former. With UV photolysis combined with ozonation (UV/O3, COD removal was much higher than the sum of that with UV photolysis and ozonation alone, which indicated that UV photolysis could efficiently promote COD removal during ozonation. This pretreatment also improved molecular weight distribution (MWD and biodegradability greatly. Proportion of organic compounds with molecular weight (MW <3 kDalton was increased from 51.9% to 85.9%. COD removal rates with BAF and O3/BAF were only about 25% and 38%, respectively. When UV/O3 oxidation was combined with BAF, the average COD removal rate reached above 61%, which was about 2.5 times of that with BAF alone. With influent COD ranging from 65 to 84 mg/L, the effluent COD was stably in the scope of 23–31 mg/L. The combination of UV/O3 oxidation with BAF was quite efficient in organic pollutants removal for tertiary wastewater treatment.

  7. Role of vegetation (Typha latifolia) on nutrient removal in a horizontal subsurface-flow constructed wetland treating UASB reactor-trickling filter effluent.

    Science.gov (United States)

    da Costa, Jocilene Ferreira; Martins, Weber Luiz Pinto; Seidl, Martin; von Sperling, Marcos

    2015-01-01

    The main objective of the work is to characterize the role of plants in a constructed wetland in the removal of nitrogen (N) and phosphorus (P). The experiments were carried out in a full-scale system in the city of Belo Horizonte, Brazil, with two parallel horizontal subsurface-flow constructed wetland units (one planted with Typha latifolia and one unplanted) treating the effluent from a system composed of an upflow anaerobic sludge blanket reactor and a trickling filter (TF). Each wetland unit received a mean flow of approximately 8.5 m³ d⁻¹ (population equivalent around 60 inhabitants each), with a surface hydraulic loading rate 0.12 m³m⁻²d⁻¹. The experiments were conducted from September 2011 to July 2013. Mean effluent concentrations from the wetlands were: (a) planted unit total nitrogen (TN) 22 mg L⁻¹, ammonia-N 19 mg L⁻¹, nitrite-N 0.10 mg L⁻¹, nitrate-N 0.25 mg L⁻¹, P-total 1.31 mg L⁻¹; and (b) unplanted unit TN 24 mg L⁻¹, ammonia-N 20 mg L⁻¹, nitrite-N 0.54 mg mL⁻¹, nitrate-N 0.15 mg L⁻¹, P-total 1.31 mg L⁻¹. The aerial part of the plant contained mean values of 24.1 gN (kg dry matter)⁻¹ and 4.4 gP (kg dry matter)⁻¹, and the plant root zone was composed of 16.5 gN (kg dry matter)⁻¹ and 4.1 gP (kg dry matter)⁻¹. The mean extraction of N by the plant biomass was 726 kgN ha⁻¹y⁻¹, corresponding to 17% of the N load removed. For P, the extraction by the plant biomass was 105 kgP ha⁻¹y⁻¹, corresponding to 9% of the P load removed. These results reinforce the reports that N and P removal due to plant uptake is a minor mechanism in horizontal subsurface-flow constructed wetlands operating under similar loading rates, typical for polishing of sanitary effluent.

  8. 新型曝气生物滤池处理生活污水试验研究%Experimental Study on New-type Biological Aerated Filter for Domestic Sewage Treatment

    Institute of Scientific and Technical Information of China (English)

    司马卫平; 何强; 张玉平

    2012-01-01

    采用半柔性填料和酶促好氧填料的两段上向流曝气生物滤池(TUBAF)处理生活污水,考察了氨氮容积负荷和溶解氧对其处理效能的影响,并分析了BAF C段有机物的去除对BAFN段处理效果的影响.结果表明,在氨氮容积负荷为0.05 ~0.25 kg/( m3·d)的条件下,对氨氮的去除率为83.2% ~94.1%;BAF C段和BAF N段的最佳DO浓度分别为(2.0 ~3.0)和(3.0 ~5.0)mg/L,能够有效实现有机物和氨氮的去除;BAF C段对有机物的去除为BAF N段对氨氮的去除提供了较好的外部环境,成功地实现了BAF N段的硝化分区.%A two-stage up-flow biological aerated filter (TUBAF) with semi-soft media and enzyme-catalyzed aerobic media ( denoted by BAF-C and BAF-N respectively) was used to treat domestic sewage. The influence of ammonia nitrogen volumetric loading and dissolved oxygen concentration on the pollutant removal efficiency was investigated, and the contribution of the removal of organic matter in BAF-C to the treatment efficiency in BAF-N was analyzed. The experimental results showed that when the ammonia nitrogen volumetric loading was 0. 05 to 0. 25 kg/( m · d) , the removal rate of ammonia nitrogen was 83. 2% to 94. 1% . The organic matter and ammonia nitrogen could be effectively removed when dissolved oxygen concentrations in BAF-C and BAF-N were 2. 0 to 3.0 mg/L and 3.0 to 5. 0 mg/L respectively. The removal of organic matter in BAF-C provided a better external environment for the removal of ammonia nitrogen in BAF-N, and the nitrification in BAF-N was realized successfully.

  9. Scintillation response of BaF sub 2 and YAlO sub 3 Ce) to energetic ions

    CERN Document Server

    Slunga, E; Ideguchi, E; Kérek, A; Klamra, W; Marel, J V D; Novák, D; Norlin, L O

    2001-01-01

    The scintillation response of BaF sub 2 and YAP:Ce to protons, alpha particles, sup 1 sup 6 O and sup 2 sup 8 Si ions in the 5-30 MeV range has been investigated. The ratio between the fast and slow parts of the scintillator signal for BaF sub 2 has been used to separate protons, alpha particles and heavier ions, and the dependence of this ratio on the particle energy has been studied. The time constants and intensities of the two components of the YAP:Ce signal were measured, as were the time constant and intensity of the weak component of the slow part of the BaF sub 2 signal. Furthermore, the dependence of the light yield on the particle energy has been investigated for both BaF sub 2 and YAP:Ce.

  10. Suppression of HPV E6 and E7 expression by BAF53 depletion in cervical cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kiwon; Lee, Ah-Young [Department of Bioscience and Biotechnology, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of); Kwon, Yunhee Kim [Department of Life and Nanopharmaceutical Science and Department of Biology, Kyunghee University, Seoul 130-701 (Korea, Republic of); Kwon, Hyockman, E-mail: hmkwon@hufs.ac.kr [Department of Bioscience and Biotechnology, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of)

    2011-08-26

    Highlights: {yields} Integration of HPV into host genome critical for activation of E6 and E7 oncogenes. {yields} BAF53 is essential for higher-order chromatin structure. {yields} BAF53 knockdown suppresses E6 and E7 from HPV integrants, but not from episomal HPVs. {yields} BAF53 knockdown decreases H3K9Ac and H4K12Ac on P105 promoter of integrated HPV 18. {yields} BAF53 knockdown restores the p53-dependent signaling pathway in HeLa and SiHa cells. -- Abstract: Deregulation of the expression of human papillomavirus (HPV) oncogenes E6 and E7 plays a pivotal role in cervical carcinogenesis because the E6 and E7 proteins neutralize p53 and Rb tumor suppressor pathways, respectively. In approximately 90% of all cervical carcinomas, HPVs are found to be integrated into the host genome. Following integration, the core-enhancer element and P105 promoter that control expression of E6 and E7 adopt a chromatin structure that is different from that of episomal HPV, and this has been proposed to contribute to activation of E6 and E7 expression. However, the molecular basis underlying this chromatin structural change remains unknown. Previously, BAF53 has been shown to be essential for the integrity of higher-order chromatin structure and interchromosomal interactions. Here, we examined whether BAF53 is required for activated expression of E6 and E7 genes. We found that BAF53 knockdown led to suppression of expression of E6 and E7 genes from HPV integrants in cervical carcinoma cell lines HeLa and SiHa. Conversely, expression of transiently transfected HPV18-LCR-Luciferase was not suppressed by BAF53 knockdown. The level of the active histone marks H3K9Ac and H4K12Ac on the P105 promoter of integrated HPV 18 was decreased in BAF53 knockdown cells. BAF53 knockdown restored the p53-dependent signaling pathway in HeLa and SiHa cells. These results suggest that activated expression of the E6 and E7 genes of integrated HPV is dependent on BAF53-dependent higher-order chromatin

  11. A BaF2 crystal array for high energy -ray measurements

    Indian Academy of Sciences (India)

    A Ray; S R Banerjee; P Das

    2001-07-01

    We shall discuss about the scientific motivation and construction of a 7 × 7 BaF2 crystal array at Variable Energy Cyclotron Centre, Calcutta. This detector would be used to measure high energy -ray photons from GDR decay and proton–neutron bremsstrahlung reactions at the present 88'' cyclotron and upcoming superconducting cyclotron at VECC, Calcutta. This detector can also be used to measure photons from quark–gluon plasma at the relativistic heavy ion collider (RHIC) in USA.

  12. Geomatics for Smart Cities: Obtaining the Urban Planning Baf Index from Existing Digital Maps

    Science.gov (United States)

    Casella, V.; Franzini, M.; De Lotto, R.

    2016-06-01

    The urban analytics expression is spreading out. To our understanding, it deals with the capability of measuring cities and their communities, as a support to their effective planning and management. In other words, being an analytically well-known city is a precondition for pursuing smartness. Urban planning is a very important item for city management and is interrelated with many layers, including urban environmental quality, air quality and well-being. Effective urban planning is based on the knowledge of quantitative parameters such as the biotope area factor (BAF), which was originally proposed for the city of Berlin and is currently used in other cities. The BAF index is used to evaluate the degree of soil permeability and measures, to a certain extent and from a specific point of view, how a city is eco-friendly. The usual way of evaluating the BAF is based on the manual construction of dedicated maps, using existing orthophotos and oblique imagery as a support. But this method is expensive, time-consuming and non-objective, as it is prone to different interpretations. The paper presents a newly-developed methodology for calculating the BAF. It is based on the use of existing digital cartography and on the application of geoprocessing techniques from GIS science: it is therefore fully automated and objective. The Pavia city (Northern Italy) is used as a testsite and a careful validation of the developed methodology is carried out, by comparison to 12 manually surveyed test areas, corresponding to 5% of the built-up areas of the municipality.

  13. Beber e dirigir: características de condutores com bafômetro positivo

    Directory of Open Access Journals (Sweden)

    Valdir Ribeiro Campos

    2012-01-01

    Full Text Available CONTEXTO: O beber e dirigir não foi suficientemente estudado no Brasil até agora. OBJETIVO: Apresentar dados do primeiro levantamento sobre o comportamento do beber e dirigir de um estado do Brasil. MÉTODO: Foram conduzidas 1.799 entrevistas anônimas com motoristas em postos de checagem de sobriedade em 10 cidades, representando as 10 regiões geográficas do estado de Minas Gerais. Desses motoristas, 1.209 (67,2% responderam a um questionário estruturado e aceitaram o teste do bafômetro. RESULTADOS: Vinte por cento dos motoristas estavam dirigindo com níveis de alcoolemia acima do limite legal. A análise de regressão logística, controlada por sexo, foi utilizada para predizer bafômetro positivo. Essa análise mostrou chance aumentada de bafômetro positivo para condutor com idade acima de 31 anos que tem frequência de consumo de álcool de, pelo menos, um a dois dias na semana e para quem não usa o cinto de segurança. CONCLUSÃO: Estudos localizados com metodologia similares realizados em postos de checagem da sobriedade podem monitorar o comportamento dos condutores e os riscos no trânsito e direcionar políticas públicas sobre o beber e dirigir.

  14. Clock Distributing for BaF2 Readout Electronics at CSNS-WNS

    CERN Document Server

    He, Bing; De-Liang-Zhang,; Wang, Qi; Zhang, Ya-Xi; Qi, Xin-Cheng; Qi-An,

    2016-01-01

    aF2 (Barium Fluoride) detector array is designed for the measurement of (n,{\\gamma}) cross section precisely at CSNS-WNS (white neutron source at China Spallation Neutron Source). It is a 4{\\pi}solid angle-shaped detector array consisting of 92 BaF2 crystal elements. To discriminate signals from BaF2 detector, pulse shape discrimination methodology is used, which is supported by waveform digitization technique. There are total 92 channels for digitizing. The precision and synchronization of clock distribution restricts the performance of waveform digitizing. In this paper, the clock prototype for BaF2 readout electronics at CSNS-WNS is introduced. It is based on PXIe platform and has a twin-stage tree topology. In the first stage, clock is distributed from the tree root to each PXIe crate synchronously through coaxial cable over long distance, while in the second stage, clock is further distributed to each electronic module through PXIe dedicated differential star bus. With the help of this topology, each tre...

  15. Evaluation Software for BaF2 Detector Array Electronics at CSNS-WNS

    Science.gov (United States)

    Zhang, Yaxi; Cao, Ping; Wang, Qi; Zhang, Deliang; He, Bing; Qi, Xincheng; An, Qi

    2017-06-01

    The “in programming barium fluoride (BaF2) detector array” is one of the experiment facilities at China Spallation Neutron Source-White Neutron Sources, which is designed for the measurement of neutron capture cross section with high accuracy. It consists of 92 crystal elements with completely 4π solid-angle coverage, which needs 92 analog channels and 92 digitization channels for data acquisition. Accordingly, the readout electronics is comprised with four distributed readout PXIe crates, containing 46 field digitization modules (FDMs). Each FDM supports two valid channels for signal digitizing. In this paper, evaluation software is designed for evaluating the performance of BaF2 readout electronics. It focuses on evaluating the performance of data transmission, waveform digitizing, and working status monitoring. Test results show that the evaluation software can correctly acquire and assemble data from the BaF2 readout system and evaluate the analog digital converter (ADC) performance under ADC test mode. FDMs in the readout system can also be monitored and controlled by this software in real time.

  16. BAF53 Forms Distinct Nuclear Complexes and Functions as a Critical c-Myc-Interacting Nuclear Cofactor for Oncogenic Transformation

    Science.gov (United States)

    Park, Jeonghyeon; Wood, Marcelo A.; Cole, Michael D.

    2002-01-01

    The c-Myc oncoprotein functions as a transcription factor that can transform normal cells into tumor cells, as well as playing a direct role in normal cell proliferation. The c-Myc protein transactivates cellular promoters by recruiting nuclear cofactors to chromosomal sites through an N-terminal transactivation domain. We have previously reported the identification and functional characterization of four different c-Myc cofactors: TRRAP, hGCN5, TIP49, and TIP48. Here we present the identification and characterization of the actin-related protein BAF53 as a c-Myc-interacting nuclear cofactor that forms distinct nuclear complexes. In addition to the human SWI/SNF-related BAF complex, BAF53 forms a complex with TIP49 and TIP48 and a separate biochemically distinct complex containing TRRAP and a histone acetyltransferase which does not contain TIP60. Using deletion mutants of BAF53, we show that BAF53 is critical for c-Myc oncogenic activity. Our results indicate that BAF53 plays a functional role in c-Myc-interacting nuclear complexes. PMID:11839798

  17. Can those organic micro-pollutants that are recalcitrant in activated sludge treatment be removed from wastewater by biofilm reactors (slow sand filters)?

    Energy Technology Data Exchange (ETDEWEB)

    Escolà Casas, Mònica; Bester, Kai, E-mail: kb@dmu.dk

    2015-02-15

    The degradation of seven compounds which are usually recalcitrant in classical activated sludge treatment (e.g., diclofenac, propranolol, iopromide, iohexol, iomeprol tebuconazole and propiconazole) was studied in a biofilm reactor (slow sand filtration). This reactor was used to treat real effluent-wastewater at different flow rates (hydraulic loadings) under aerobic conditions so removal and degradation kinetics of these recalcitrant compounds were calculated. With the hydraulic loading rate of 0.012 m{sup 3} m{sup 2} h{sup −1} the reactor removed 41, 94, 58, 57 and 85% of diclofenac, propranolol, iopromide, iohexol and iomeprol respectively. For these compounds the removal efficiency was dependent on hydraulic residence-times. Only 59 and 21% of the incoming tebuconazole and propiconazole respectively were removed but their removal did not depend on hydraulic residence time. Biofilm reactors are thus efficient in removing micro-pollutants and could be considered as an option for advanced treatment in small wastewater treatment plants. - Highlights: • A biofilm reactor (biofilter) can remove micro-pollutants from WWTP effluent. • Sorption could be excluded as the dominant removal mechanism. • Biodegradation was responsible for removing seven compounds. • The removal efficiency was usually proportional to the hydraulic residence-time. • Single first-order removal rates apply for most compounds.

  18. Filter for isotopic alteration of mercury vapor

    Science.gov (United States)

    Grossman, M.W.; George, W.A.

    1989-06-13

    A filter is described for enriching the [sup 196]Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The [sup 196]Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is, less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter. 9 figs.

  19. Suppression of HPV E6 and E7 expression by BAF53 depletion in cervical cancer cells.

    Science.gov (United States)

    Lee, Kiwon; Lee, Ah-Young; Kwon, Yunhee Kim; Kwon, Hyockman

    2011-08-26

    Deregulation of the expression of human papillomavirus (HPV) oncogenes E6 and E7 plays a pivotal role in cervical carcinogenesis because the E6 and E7 proteins neutralize p53 and Rb tumor suppressor pathways, respectively. In approximately 90% of all cervical carcinomas, HPVs are found to be integrated into the host genome. Following integration, the core-enhancer element and P105 promoter that control expression of E6 and E7 adopt a chromatin structure that is different from that of episomal HPV, and this has been proposed to contribute to activation of E6 and E7 expression. However, the molecular basis underlying this chromatin structural change remains unknown. Previously, BAF53 has been shown to be essential for the integrity of higher-order chromatin structure and interchromosomal interactions. Here, we examined whether BAF53 is required for activated expression of E6 and E7 genes. We found that BAF53 knockdown led to suppression of expression of E6 and E7 genes from HPV integrants in cervical carcinoma cell lines HeLa and SiHa. Conversely, expression of transiently transfected HPV18-LCR-Luciferase was not suppressed by BAF53 knockdown. The level of the active histone marks H3K9Ac and H4K12Ac on the P105 promoter of integrated HPV 18 was decreased in BAF53 knockdown cells. BAF53 knockdown restored the p53-dependent signaling pathway in HeLa and SiHa cells. These results suggest that activated expression of the E6 and E7 genes of integrated HPV is dependent on BAF53-dependent higher-order chromatin structure or nuclear motor activity. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Treatment of Slightly Polluted Wastewater in an Oil Refinery Using a Biological Aerated Filter Process

    Institute of Scientific and Technical Information of China (English)

    XIE Wenyu; ZHONG Li; CHEN Jianjun

    2007-01-01

    The slightly polluted wastewater from oil refinery contains some COD, oil pollutants and suspended solids (SS). A small-scale fixed film biological aerated filter (BAF) process was used to treat the wastewater. The influences of hydraulic retention time (HRT), air/water volume flow ratio and backwashing cycle on treatment efficiencies were investigated. The wastewater was treated by the BAF process under optimal conditions: the HRT of backwashing cycle of every 4-7 days. The results showed that the average removal efficiency of COD, oil pollutants and SS was 84.5%, 94.0% and 83.4%, respectively. And the average effluent concentration of COD, oil pollutants and SS was 12.5, 0.27, 14.5the BAF process is a suitable and highly efficient method to treat the wastewater.

  1. Essential role of BAF complex interacting with Pax6 in establishment of a core cross-regulatory neurogenic network

    Science.gov (United States)

    Ninkovic, Jovica; Steiner-Mezzadri, Andrea; Jawerka, Melanie; Akinci, Umut; Masserdotti, Giacomo; Petricca, Stefania; Fischer, Judith; von Holst, Alexander; Beckers, Johanes; Lie, Chichung D.; Petrik, David; Miller, Erik; Tang, Jiong; Wu, Jiang; Lefebvre, Veronique; Demmers, Jeroen; Eisch, Amelia; Metzger, Daniel; Crabtree, Gerald; Irmler, Martin; Poot, Raymond; Götz, Magdalena

    2014-01-01

    The molecular mechanisms of neurogenic fate determination are of particular importance in light of the need to regenerate neurons. Here we define the mechanisms of installing neurogenic fate by the transcription factor Pax6 acting together with the Brg1-containing BAF chromatin remodeling complex. We show that Pax6 physically interacts with Brg1-containing BAF complex and genetic deletion of either Pax6 or Brg1, in the neural stem cells in the adult mouse subependymal zone results in a strikingly similar fate conversion from neuronal progenitors to glia. The Pax6-BAF complex drives neurogenesis by directly activating transcription factors Sox11, Nfib and Pou3f4, which form a cross-regulatory network that maintains neurogenic fate downstream of the Pax6-BAF complex in neuroblasts. Our work identifies a novel concept of stratification in neural fate commitment with a strikingly specific role of the Pax6-BAF complex in initiating a cross-regulatory network essential for maintenance of the neurogenic lineage in the adult brain. PMID:23933087

  2. A new irradiation method with a neutron filter for silicon neutron transmutation doping at the Japan research reactor no. 3 (JRR-3).

    Science.gov (United States)

    Komeda, Masao; Kawasaki, Kozo; Obara, Toru

    2013-04-01

    We studied a new silicon irradiation holder with a neutron filter designed to make the vertical neutron flux profile uniform. Since an irradiation holder has to be made of a low activation material, we applied aluminum blended with B4C as the holder material. Irradiation methods to achieve uniform flux with a filter are discussed using Monte-Carlo calculation code MVP. Validation of the use of the MVP code for the holder's analyses is also discussed via characteristic experiments. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Does the Loss of ARID1A (BAF-250a Expression in Endometrial Clear Cell Carcinomas Have Any Clinicopathologic Significance? A Pilot Assessment

    Directory of Open Access Journals (Sweden)

    Oluwole Fadare, Idris L. Renshaw, Sharon X. Liang

    2012-01-01

    Full Text Available SWI/SNF chromatin-modification complexes use the energy of ATP hydrolysis to remodel nucleosomes and to affect transcription and several cellular processes. Accordingly, their loss of function has been associated with malignant transformation. ARID1A (the expression of whose product, BAF250a, a key complex component, is lost when mutated has recently been identified as a tumor suppressor gene that is mutated in 46-57% of ovarian clear cell carcinoma (CCC. The purposes of this study are to assess the frequency of loss of BAF250a expression in endometrial CCC and whether this loss has any discernable clinicopathologic implications. 34 endometrial carcinomas with a CCC component (including 22 pure CCC, 8 mixed carcinomas with a 10% CCC component, and 4 carcinosarcomas with a CCC epithelial component, were evaluated by immunohistochemistry using a monoclonal antibody directed against the human BAF250a protein. 5 (22.7% of the 22 pure CCC were entirely BAF250a negative, whereas the remainder showed diffuse immunoreactivity. None of 4 carcinosarcomas and only 1 (12.5% of the 8 mixed carcinomas were BAF250a negative. There was no discernable relationship between BAF250a immunoreactivity status and tumor architectural patterns (solid, papillary or tubulocystic areas or cell type (flat, hobnail or polygonal. Of the 22 patients with pure CCC, 14, 2, 3, and 3 were International Federation of Gynecology and Obstetrics stages 1, II, III and IV respectively. Interestingly, all 5 BAF250a negative cases were late stage [stages III or IV] as compared with 1 of 17 BAF250a positive cases (p=0.0002. Thus, 83% (5/6 of all late stage cases were BAF250a [-], as compared with 0 (0% of the 16 early stage (I or II cases (p=.0002. BAF250a negative and positive cases did not show any statistically significant difference regarding patient age and frequency of lymphovascular invasion or myometrial invasion. As may be anticipated from the concentration of late stage cases in

  4. Structure, branching ratios, and a laser-cooling scheme for the 138BaF molecule

    Science.gov (United States)

    Chen, Tao; Bu, Wenhao; Yan, Bo

    2016-12-01

    For laser-cooling considerations, we have theoretically investigated the electronic, rovibrational, and hyperfine structures of the BaF molecule. The highly diagonal Franck-Condon factors and the branching ratios for all possible transitions within the lowest-lying four electronic states have also been calculated. Meanwhile, the mixing between the metastable A'2Δ and A2Π states and, further, the lifetime of the Δ state have been estimated since the loss procedure via the Δ state might fatally break the main quasicycling Σ -Π transition for cooling and trapping. The resultant hyperfine splittings of each rovibrational state in the X2Σ+ state provide benchmarks for sideband modulations of the cooling and repumping lasers and the remixing microwaves to address all necessary levels. The calculated Zeeman shift and g factors for both X and A states serve as benchmarks for selection of the trapping laser polarizations. Our study paves the way for future laser cooling and magneto-optical trapping of the BaF molecule.

  5. Small Molecule Inhibitors of BAF; A Promising Family of Compounds in HIV-1 Latency Reversal

    Directory of Open Access Journals (Sweden)

    Mateusz Stoszko

    2016-01-01

    Full Text Available Persistence of latently infected cells in presence of Anti-Retroviral Therapy presents the main obstacle to HIV-1 eradication. Much effort is thus placed on identification of compounds capable of HIV-1 latency reversal in order to render infected cells susceptible to viral cytopathic effects and immune clearance. We identified the BAF chromatin remodeling complex as a key player required for maintenance of HIV-1 latency, highlighting its potential as a molecular target for inhibition in latency reversal. Here, we screened a recently identified panel of small molecule inhibitors of BAF (BAFi's for potential to activate latent HIV-1. Latency reversal was strongly induced by BAFi's Caffeic Acid Phenethyl Ester and Pyrimethamine, two molecules previously characterized for clinical application. BAFi's reversed HIV-1 latency in cell line based latency models, in two ex vivo infected primary cell models of latency, as well as in HIV-1 infected patient's CD4+ T cells, without inducing T cell proliferation or activation. BAFi-induced HIV-1 latency reversal was synergistically enhanced upon PKC pathway activation and HDAC-inhibition. Therefore BAFi's constitute a promising family of molecules for inclusion in therapeutic combinatorial HIV-1 latency reversal.

  6. Hardness of CaF2 and BaF2 solid lubricants at 25 to 670 deg C

    Science.gov (United States)

    Deadmore, Daniel L.; Sliney, Harold E.

    1987-01-01

    Plastic deformation is a prominent factor in determining the lubricating value of solid lubricants. Little information is available and its direct measurement is difficult so hardness, which is an indirect measure of this property was determined for fluoride solid lubricant compositions. The Vickers hardness of BaF2 and CaF2 single crystals was measured up to 670 C in a vacuum. The orientation of the BaF2 was near the (013) plane and the CaF2 was about 16 degrees from the degrees from the (1'11) plane. The BaF2 has a hardness of 83 kg/sq mm at the 25 C and 9 at the 600 C. The CaF2 is 170 at 25 C and 13 at 670 C. The decrease in hardness in the temperature range of 25 to 100 C is very rapid and amounts to 40% for both materials. Melts of BaF2 and CaF2 were made in a platinum crucible in ambient air with compositions of 50 to 100 wt% BaF2. The Vickers hardness of these polycrystalline binary compositions at 25 C increased with increasing CaF2 reaching a maximum of 150 kn/sq mm near the eutectic. The polycrystalline CaF2 was 14% softer than that of the single crystal surface and BsF2 was 30% harder than the single crystal surface. It is estimated that the brittle to ductile transition temperature for CaF2 and BaF2 is less than 100 C for the conditions present in the hardness tester.

  7. Fenton-BAF-RO工艺处理电镀前处理废水并回用%Treatment and Reuse of Electroplating Pre-treatment Wastewater by Fenton/BAF/RO Membrane Technology

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    Pre-treatment wastewater is an important part of the plating wastewater. It has higher COD but with relatively larger reuse potential. The technology of Fenton-BAF-RO membrane separation process was used to treat electroplating Pre-treatment wastewater from a plant in Guangdong province, the results show that the pre-treatment wastewater can be advanced treated and reused effectively by this technology, and by concentrated water recirculation, zero emission was achieved. Fenton-BAF process ensure the stable operation of the RO system.%  前处理废水是电镀废水的重要组成部分,COD较高但回用潜力相对较大。采用Fenton-BAF-RO膜分离工艺处理广东省某厂电镀前处理废水,运行结果表明,该工艺可有效实现电镀前处理废水的深度处理及回用,并且通过浓水回流达到零排放,Fenton-BAF 工艺保证了 RO 系统的稳定运行。

  8. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  9. Familial partial lipodystrophy, mandibuloacral dysplasia and restrictive dermopathy feature barrier-to-autointegration factor (BAF) nuclear redistribution.

    Science.gov (United States)

    Capanni, Cristina; Squarzoni, Stefano; Cenni, Vittoria; D'Apice, Maria Rosaria; Gambineri, Alessandra; Novelli, Giuseppe; Wehnert, Manfred; Pasquali, Renato; Maraldi, Nadir M; Lattanzi, Giovanna

    2012-10-01

    Prelamin A processing impairment is a common feature of a restricted group of rare genetic alterations/disorders associated with a wide range of clinical phenotypes. Changes in histone posttranslational modifications, alterations in non-histone chromatin proteins and chromatin disorganization have been specifically linked to impairment of specific, distinct prelamin A processing steps, but the molecular mechanism involved in these processes is not yet understood . In this study, we show that the accumulation of wild-type prelamin A detected in restrictive dermopathy (RD), as well as the accumulation of mutated forms of prelamin A identified in familial partial lipodystrophy (FPLD) and mandibuloacral dysplasia (MADA), affect the nuclear localization of barrier-to-autointegration factor (BAF), a protein able to link lamin A precursor to chromatin remodeling functions. Our findings, in accordance with previously described results, support the hypothesis of a prelamin A involvement in BAF nuclear recruitment and suggest BAF-prelamin A complex as a protein platform usually activated in prelamin A-accumulating diseases. Finally, we demonstrate the involvement of the inner nuclear membrane protein emerin in the proper localization of BAF-prelamin A complex.

  10. Simultaneous nutrients and carbon removal from low-strength domestic wastewater with an immobilised-microorganism biological aerated filter.

    Science.gov (United States)

    Chen, Q; Qu, L; Tong, G; Ni, J

    2011-01-01

    To improve the efficiency of low-strength domestic wastewater treatment, an immobilised-microorganism biological aerated filter (I-BAF) was established for simultaneous carbon, nitrogen and phosphorus removal. The I-BAF performance was systematically evaluated under continuous and intermittent aeration modes. At the optimal condition with an intermittent aeration control schedule of 2 h on/1 h off, the maximum removal rates of COD, NH(4)(+)-N, TN and P were 82.54%, 94.83%, 51.85% and 61.49%, respectively, and the corresponding averaged effluents could meet the first class standards of China. Further analysis of PCR-DGGE profile revealed that members of the gamma and alpha proteobacterium bacterial groups were probably responsible for the nitrogen and phosphorus removal. The I-BAF system showed excellent performance in carbon and nutrients removal, which provided a cost-effective solution for the treatment of low-strength domestic wastewater.

  11. Proposal of Readout Electronics for CSNS-WNS BaF2 Detector

    CERN Document Server

    Zhang, Deliang; Wang, Qi; He, Bing; Zhang, Yaxi; Qi, Xincheng; Yu, Tao; An, Qi

    2016-01-01

    BaF2 (Barium fluoride) detector is one of the experiment facilities at the under construction CSNS-WNS (White Neutron Source at China Spallation Neutron Source). It is designed for precisely measuring (n,gamma) cross section with total 92 crystal elements and completely 4 pi steradian coverage. In this proposal for readout electronics, waveform digitizing technique with 1GSps sampling rate and 12-bit resolution is adopted to precisely capture the detector signal. To solve the problem of massive data readout and processing, the readout electronics system is designed into a distributed architecture with 4 PXIe crates. The digitized detector's signal is concentrated to PXIe crate controller through PCIe bus on backplane and transmitted to data acquisition system over Gigabit Ethernet in parallel. Besides, clock and trigger can be fanned out synchronously to each electronic channel over a high-precision distributing network. Test results showed that the prototype of the readout electronics system achieved good pe...

  12. Phonons in mixed superionic fluorites (BaF2)1–(LaF3)

    Indian Academy of Sciences (India)

    M M Sinha

    2002-11-01

    In recent years, the fluorite-structured solid solutions with the general formula, (MF2)1–(RF3) (M = Ca, Sr, Ba, Pb and R is a rare-earth element or Y), have been the subject of numerous experimental studies focussed on their superionic properties. The overall cubic crystal symmetry (space group 3) is conserved up to ≤ max, where max 0.4–0.5 depending on M and R. The zone centre phonons and phonon dispersion along three symmetry directions of the mixed superionic compound (BaF2)1–(LaF3) have been investigated by applying de Launey angular force model for ≤ max. The calculated results are compared and explained with available experimental results.

  13. Structures, Branching Ratios and Laser Cooling Scheme for 138BaF Molecule

    CERN Document Server

    Chen, Tao; Yan, Bo

    2016-01-01

    For laser cooling considerations, we have theoretically investigated the electronic, rovibrational and hypefine structures of BaF molecule. The highly diagonal Franck-Condon factors and the branching ratios for all possible transitions within the lowest-lying four electronic states have also been calculated. Meanwhile, the mixing between metastable A'2{\\Delta} and A2{\\Pi} states and further the lifetime of the {\\Delta} state have been estimated since the loss procedure via {\\Delta} state would like fatally destroy the main quasi-cycling {\\Sigma}-{\\Pi} transition for cooling and trapping. The resultant hyperfine splittings of each rovibrational states in X2{\\Sigma}+ state provide benchmarksfor sideband modulations of cooling and repumping lasers and remixing microwaves to address all necessary levels. The calculated Zeeman shift and g-factors for both X and A states serve as benchmarks for selections of the trapping laser polarizations. Our study paves the way for future laser cooling and magneto-optical trapp...

  14. Tratamento de águas residuárias de suinocultura em reator UASB e filtro anaeróbio em série seguidos de filtro biológico percolador Treatment of swine wastewater in UASB reactor and anaerobic filter in series followed of trickling filter

    Directory of Open Access Journals (Sweden)

    Rose Maria Duda

    2011-03-01

    Full Text Available Avaliou-se o desempenho de um reator anaeróbio de fluxo ascendente com manta de lodo (UASB seguido de um filtro anaeróbio, instalados em série, com volume total de 300 L e 190 L, respectivamente, no tratamento de águas residuárias de suinocultura. As cargas orgânicas volumétricas aplicadas no reator UASB foram de 12,4;15,5; 23,2 e 26,3 g DQOtotal (L d-1. Para o pós-tratamento do efluente do sistema anaeróbio em dois estágios utilizou-se um filtro biológico percolador com volume total de 250 L. O meio suporte utilizado nos filtros anaeróbio e biológico percolador foi composto por anéis de bambu. No sistema de tratamento anaeróbio e de pós-tratamento foram observadas eficiências médias de remoção de demanda química de oxigênio total (DQOtotal, sólidos suspensos totais (SST, nitrogênio total (NT, fósforo total (P-total, Cu e Zn de até 98, 99, 78, 84, 99 e 98%, respectivamente.The performance of an upflow anaerobic sludge blanket (UASB followed by the anaerobic filter, installed in series, was evaluated for the treatment of swine wastewater. The total volume of UASB and anaerobic filter were of 300 L and 190 L, respectively. The organic load rate applied on the reactor UASB were of 12.4, 15.5, 23.2 and 26.3 g total COD (L d-1. For the post-treatment of effluent the anaerobic system was used a trickling filter with total volume of 250 L. The supports used in the anaerobic filter and trickling filter were composed by bamboo rings. The efficiencies of removal the chemical oxygen demand, total solids suspended, nitrogen, total phosphorus, Cu and Zn were of up to 98, 99, 78, 84, 99 and 98%, respectively, for the anaerobic and aerobic treatment system.

  15. BAF53b, a Neuron-Specific Nucleosome Remodeling Factor, Is Induced after Learning and Facilitates Long-Term Memory Consolidation.

    Science.gov (United States)

    Yoo, Miran; Choi, Kwang-Yeon; Kim, Jieun; Kim, Mujun; Shim, Jaehoon; Choi, Jun-Hyeok; Cho, Hye-Yeon; Oh, Jung-Pyo; Kim, Hyung-Su; Kaang, Bong-Kiun; Han, Jin-Hee

    2017-03-29

    Although epigenetic mechanisms of gene expression regulation have recently been implicated in memory consolidation and persistence, the role of nucleosome-remodeling is largely unexplored. Recent studies show that the functional loss of BAF53b, a postmitotic neuron-specific subunit of the BAF nucleosome-remodeling complex, results in the deficit of consolidation of hippocampus-dependent memory and cocaine-associated memory in the rodent brain. However, it is unclear whether BAF53b expression is regulated during memory formation and how BAF53b regulates fear memory in the amygdala, a key brain site for fear memory encoding and storage. To address these questions, we used viral vector approaches to either decrease or increase BAF53b function specifically in the lateral amygdala of adult mice in auditory fear conditioning paradigm. Knockdown of Baf53b before training disrupted long-term memory formation with no effect on short-term memory, basal synaptic transmission, and spine structures. We observed in our qPCR analysis that BAF53b was induced in the lateral amygdala neurons at the late consolidation phase after fear conditioning. Moreover, transient BAF53b overexpression led to persistently enhanced memory formation, which was accompanied by increase in thin-type spine density. Together, our results provide the evidence that BAF53b is induced after learning, and show that such increase of BAF53b level facilitates memory consolidation likely by regulating learning-related spine structural plasticity.SIGNIFICANCE STATEMENT Recent works in the rodent brain begin to link nucleosome remodeling-dependent epigenetic mechanism to memory consolidation. Here we show that BAF53b, an epigenetic factor involved in nucleosome remodeling, is induced in the lateral amygdala neurons at the late phase of consolidation after fear conditioning. Using specific gene knockdown or overexpression approaches, we identify the critical role of BAF53b in the lateral amygdala neurons for memory

  16. 曝气生物滤池工艺脱氮性能及反硝化细菌群落结构特征研究%Study on the Nitrogen Removal Performance and the Characteristics of Denitrification Bacterial Community Structure of Biological Aerated Filter

    Institute of Scientific and Technical Information of China (English)

    彭晓兰; 刘聪; 陈吕军

    2012-01-01

    The nitrogen removal performance and the denitrification bacterial community structure of two pre-denitrification biological aeration filter(BAF) processes with different media combinations,the ceramic-zeolite BAF process(C-Z BAF) and the zeolite-ceramic BAF process(Z-C BAF),were compared at different C/N ratios.The results showed that the average TN removal efficiency of Z-C BAF was higher than that of C-Z BAF,and the advantage was more notable at low C/N ratio.When the C/N ratio decreased to 3.3,the average TN removal efficiency of Z-C BAF was 20% higher than that of C-Z BAF.Comparing the microbial community structure of the two combinations at different C/N ratios,it was found that the richness and diversity of denitrification bacterial community decreased significantly with the decrease of C/N ratio.At low C/N ratio,within the whole oxic filter of Z-C BAF,nosZ genetic T-RFs were detected with more than 20% relative abundance,whereas no nosZ genetic T-RFs were detected at the upper oxic filter of C-Z BAF by PCR amplification.The results indicated that the simultaneous nitrification and denitrification function of Z-C BAF was better than that of C-Z BAF.At low C/N ratio,the nitrogen removal efficiency of Z-C BAF was obviously higher than that of C-Z BAF.Thus,compared to C-Z BAF,Z-C BAF had greater potential on the treatment of wastewater with low organic concentration and low C/N ratio.%比较了两组不同填料组合的前置反硝化曝气生物滤池(biological aeration filter,BAF)脱氮工艺:陶粒-沸石BAF工艺(C-Z BAF)和沸石-陶粒BAF工艺(Z-C BAF),在不同C/N条件下的脱氮效果及滤料表面的反硝化细菌群落结构特征.结果表明,Z-C BAF对TN的平均去除效率高于C-Z BAF,且在低C/N条件下Z-C BAF的优势更加明显,当C/N为3.3时Z-C BAF的TN平均去除率比C-Z BAF高出20%.测定2种组合在不同C/N条件下的反硝化细菌群落结构发现,随着C/N的降低,2种组合反硝化细菌

  17. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  18. Full-Scale Continuous Mini-Reactor Setup for Heterogeneous Grignard Alkylation of a Pharmaceutical Intermediate

    DEFF Research Database (Denmark)

    Pedersen, Michael Jønch; Holm, Thomas; Rahbek, Jesper P.

    2013-01-01

    A reactor setup consisting of two reactors in series has been implemented for a full-scale, heterogeneous Grignard alkylation. Solutions pass from a small filter reactor into a static mixer reactor with multiple side entries, thus combining continuous stirred tank reactor (CSTR) and plug flow rea...

  19. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  20. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  1. 曝气生物滤池处理石油采出水的动力学特性研究%Kinetic Performance of Oil-field Produced Water Treatment by Biological Aerated Filter

    Institute of Scientific and Technical Information of China (English)

    苏德林; 王建龙; 刘凯文; 周定

    2007-01-01

    The biological aerated filter (BAF) was used to treat the oil-field produced water. The removal efficiency for oil, COD, BOD and suspended solids (SS) was 76.3%-80.3%, 31.6%-57.9%, 86.3%-96.3% and 76.4%-82.7%, respectively when the hydraulic loading rates varied from 0.6m·h-1 to 1.4m·h-1. The greatest part of removal, for example more than 80% of COD removal, occurred on the top 100cm of the media in BAF. The kinetic performance of BAF indicated that the relationship of BOD removal efficiency with the hydraulic loading rates in biological aerated filters could be described by cr/ci=1-exp(-2.44/L0.59). This equation could be used to predict the BOD removal efficiency at different hydraulic loading rates.

  2. The effects of Tb3+ doping concentration on luminescence properties and crystal structure of BaF2 phosphor

    Indian Academy of Sciences (India)

    Zhenxing Du; Quansheng Liu; Tianjiang Hou; Yue Song; Xiyan Zhang; Yanyu Cui

    2015-06-01

    This paper is aimed at explaining the effects of Tb3+ concentration on structure and luminescence properties and clarifying the concentration quenching mechanism of Tb3+. The lattice of BaF2 decreases with the increase of Tb3+ ions concentration. The emission spectrum of BaF2:Tb3+ consists of blue emission band and green emission band and corresponds to the transition of 5D3 $\\to$ 7F ( =0, 1, 2, 4, 5, 6) and 5D4 $\\to$ 7F ( =2, 3, 4, 5, 6) of Tb3+. The optimum concentration of Tb3+ is 4 mol%, and the concentration quenching mechanism of Tb3+ can be interpreted by the dipole–quadrupole (d–q) interaction.

  3. BAF Complex Is Closely Related to and Interacts with NF1/CTF and RNA Polymerase Ⅱ in Gene Transcriptional Activation

    Institute of Scientific and Technical Information of China (English)

    Li-Hui ZHAO; Xue-Qing BA; Xiao-Guang WANG; Xiao-Juan ZHU; Li WANG; Xian-Lu ZENG

    2005-01-01

    Brg- or hBrm-associated factor (BAF) complexes, a chromatin-remodeling complex family of mammalian cells, facilitate transcriptional activity by remodeling nucleosome structure. Brg 1 is the core subunit of Brg-associated factor complexes. In the present study, we investigated the spatial relationship between Brg1 and nuclear factor 1 (NF1/CTF) and RNA polymerase Ⅱ (RNAP Ⅱ) upon gene transcriptional activation in vivo by employing immuno-gold labeling. The data showed that Brg1 was closely co-localized with NF1/CTF and RNAP Ⅱ in HeLa cells. Moreover, the co-immunoprecipitation assay further revealed that Brg1 can be isolated together with NF1/CTF and RNAP Ⅱ in the ConA-stimulated, but not the resting,T lymphocyte. The combined results suggested that BAF complexes can interact with NF1/CTF and RNAP Ⅱ, and this interaction is closely dependent on the activation of gene transcription.

  4. Filter arrays

    Energy Technology Data Exchange (ETDEWEB)

    Page, Ralph H.; Doty, Patrick F.

    2017-08-01

    The various technologies presented herein relate to a tiled filter array that can be used in connection with performance of spatial sampling of optical signals. The filter array comprises filter tiles, wherein a first plurality of filter tiles are formed from a first material, the first material being configured such that only photons having wavelengths in a first wavelength band pass therethrough. A second plurality of filter tiles is formed from a second material, the second material being configured such that only photons having wavelengths in a second wavelength band pass therethrough. The first plurality of filter tiles and the second plurality of filter tiles can be interspersed to form the filter array comprising an alternating arrangement of first filter tiles and second filter tiles.

  5. 曝气生物滤池中无机氮转化规律与降解数学模型%Transformation Regularity of Inorganic Nitrogen and Mathematical Model of Degradation in Biological Aerated Filter

    Institute of Scientific and Technical Information of China (English)

    夏绍凤

    2012-01-01

    Biological aerated filter (BAF) reactor in which the sewage and gas flow upward through the filtering media layer is one of the pushing reactors. In order to study its characteristics of inorganic nitrogen transformation along the reactor, the reactor was divided into four sampling sites and the different characteristics of inorganic nitrogen transformation caused by different organic loading and NH3-N loading as well as the biological quantity and activity of each section was researched. The result indicates when hydraulic loading rate is 1.13-2.38 m3/m2+h, ratio of air and water is 4-5:1, DO is 2.9-5.9 mg/L and NH3-N loading is 0.25-0.5 kgNH3-N/m3+d without any organic carbon, the major reaction is nitration in the reactor. More than 70 % NH3-N in the influent is nitrified when the relative height of the filter is less than 0.52. Total nitrogen (TN) basically maintains balanced, NO-3 -N increases, and there is few NOj -N in the reactor. According to Eckenfelder model, the kinetics equation of NH3-N transformation is Se = 50exp(-0.013 4D/L1.261 2).%上向流曝气生物滤池反应器(BAF)中的污水、空气从下往上同向流过滤料层,是一种推流式反应器.为研究其沿程无机氮转化特性,试验装置由下至上共设有4个取样口,研究各区间段由于NH3-N负荷、生物数量及活性等不同引起的沿程无机氮转化特性差异.试验结果表明在水力负荷为1.13~2.38 m3/m2·h、气水比为4~5∶1、沿程DO为2.9~5.9 mg/L、NH3-N负荷为0.25~0.5 kgNH3-N/m3·d、不加任何有机碳源的情况下,反应器内以硝化反应为主,进水中70%以上的NH3-N在相对高度0.52以下部分被硝化.曝气生物滤池沿程NO3- -N增加,NO2--N含量较少,TN基本维持平衡.依据Eckenfelder模式,BAF滤池中NH3-N沿程转化动力学方程为:Se=Soexp(-0.013 4D/L1.2612).

  6. Persistent magnetism in silver-doped BaF e2A s2 crystals

    Science.gov (United States)

    Li, Li; Cao, Huibo; Parker, David S.; Kuhn, Stephen J.; Sefat, Athena S.

    2016-10-01

    We investigate the thermodynamic and transport properties of silver-substituted BaF e2A s2 (122) crystals up to ˜4.5 % . Similar to other transition-metal substitutions in 122, Ag diminishes the antiferromagnetic (TN) and structural (TS) transition temperatures, but unlike other electron-doped 122s, TN and TS coincide without splitting. Although magnetism drops precipitously to TN= 84 K at doping x =0.029 , it only weakly changes above this x , settling at TN= 80 K at x =0.045 . Compared to this persistent magnetism in Ag-122, doping other group 11 elements of either Cu or Au in 122 diminished TN and induced superconductivity near Tc= 2 K at x =0.044 or 0.031, respectively. Ag-122 crystals show reflective surfaces with surprising thicker cross sections for x ≥0.019 , the appearance that is in contrast to the typical thin stacked layered feature seen in all other flux-grown x122 and lower Ag-122. This physical trait may be a manifest of intrinsic weak changes in c lattice and TN. Our theoretical calculations suggest that Ag doping produces strong electronic scattering and yet a relatively small disruption of the magnetic state, both of which preclude superconductivity in this system.

  7. Investigation of rare nuclear decays with BaF$_2$ crystal scintillator contaminated by radium

    CERN Document Server

    Belli, P; Cappella, F; Caracciolo, V; Cerulli, R; Danevich, F A; Di Marco, A; Incicchitti, A; Poda, D V; Polischuk, O G; Tretyak, V I

    2014-01-01

    The radioactive contamination of a BaF$_2$ scintillation crystal with mass of 1.714 kg was measured over 101 hours in the low-background DAMA/R&D set-up deep underground (3600 m w.e.) at the Gran Sasso National Laboratories of INFN (LNGS, Italy). The half-life of $^{212}$Po (present in the crystal scintillator due to contamination by radium) was measured as $T_{1/2}(^{212}$Po) = 298.8$\\pm$0.8(stat.)$\\pm$1.4(syst.) ns by analysis of the events' pulse profiles. The $^{222}$Rn nuclide is known as 100% decaying via emission of $\\alpha$ particle with $T_{1/2}$ = 3.82 d; however, its $\\beta$ decay is also energetically allowed with $Q_\\beta = 24\\pm21$ keV. Search for decay chains of events with specific pulse shapes characteristic for $\\alpha$ or for $\\beta/\\gamma$ signals and with known energies and time differences allowed us to set, for the first time, the limit on the branching ratio of $^{222}$Rn relatively to $\\beta$ decay as $B_\\beta 8.0$ y). Half-life limits of $^{212}$Pb, $^{222}$Rn and $^{226}$Ra rel...

  8. The BAF complex interacts with Pax6 in adult neural progenitors to establish a neurogenic cross-regulatory transcriptional network.

    Science.gov (United States)

    Ninkovic, Jovica; Steiner-Mezzadri, Andrea; Jawerka, Melanie; Akinci, Umut; Masserdotti, Giacomo; Petricca, Stefania; Fischer, Judith; von Holst, Alexander; Beckers, Johanes; Lie, Chichung D; Petrik, David; Miller, Erik; Tang, Jiong; Wu, Jiang; Lefebvre, Veronique; Demmers, Jeroen; Eisch, Amelia; Metzger, Daniel; Crabtree, Gerald; Irmler, Martin; Poot, Raymond; Götz, Magdalena

    2013-10-03

    Numerous transcriptional regulators of neurogenesis have been identified in the developing and adult brain, but how neurogenic fate is programmed at the epigenetic level remains poorly defined. Here, we report that the transcription factor Pax6 directly interacts with the Brg1-containing BAF complex in adult neural progenitors. Deletion of either Brg1 or Pax6 in the subependymal zone (SEZ) causes the progeny of adult neural stem cells to convert to the ependymal lineage within the SEZ while migrating neuroblasts convert to different glial lineages en route to or in the olfactory bulb (OB). Genome-wide analyses reveal that the majority of genes downregulated in the Brg1 null SEZ and OB contain Pax6 binding sites and are also downregulated in Pax6 null SEZ and OB. Downstream of the Pax6-BAF complex, we find that Sox11, Nfib, and Pou3f4 form a transcriptional cross-regulatory network that drives neurogenesis and can convert postnatal glia into neurons. Taken together, elements of our work identify a tripartite effector network activated by Pax6-BAF that programs neuronal fate.

  9. Numerical modeling of radiative heat transfer in Bridgman solidification of semi-transparent BaF 2 crystals

    Science.gov (United States)

    Stelian, C.

    2007-08-01

    The radiative heat transfer during Bridgman solidification of semi-transparent barium fluoride (BaF 2) crystals is numerically investigated by using the commercial software FIDAP. This code uses the P-1 approximation for the participating media modeling. The thermal field and the solid-liquid interface shape are computed for an opaque melt-crystal sample, a semi-transparent grey sample and a semi-transparent non-grey sample. The transient numerical analysis of the latent heat influence on the interface deflection shows a significant effect on the interface shape. In the case of an opaque sample, this effect is huge because of the small thermal conductivity of the BaF 2 melt. The interface curvature is drastically reduced when the latent heat is taken into account, and the growth front, which has a convex shape, becomes flat when the growth rate increases. The latent heat effect is reduced in the case of the participating BaF 2 sample because the effective thermal conductivity of the melt is augmented by the internal radiative heat transfer. The internal radiative effect is small at low solidified fractions but becomes significant when the crystal length increases, leading to a more curved interface. When the growth rates are greater than a critical value, the interface becomes concave and a destabilization of the growth process can occur. These results are in agreement with previous experimental measurements of the interface curvature and analytical investigations of the factors affecting the interface deflection.

  10. SWI/SNF protein component BAF250a regulates cardiac progenitor cell differentiation by modulating chromatin accessibility during second heart field development.

    Science.gov (United States)

    Lei, Ienglam; Gao, Xiaolin; Sham, Mai Har; Wang, Zhong

    2012-07-13

    ATP-dependent SWI/SNF chromatin remodeling complexes alter the structure of chromatin at specific loci and facilitate tissue-specific gene regulation during development. Several SWI/SNF subunits are required for cardiogenesis. However, the function and mechanisms of SWI/SNF in mediating cardiac progenitor cell (CPC) differentiation during cardiogenesis are not well understood. Our studies of the SWI/SNF chromatin remodeling complex identified that BAF250a, a regulatory subunit of the SWI/SNF, plays a key role in CPC differentiation. BAF250a ablation in mouse second heart field (SHF) led to trabeculation defects in the right ventricle, ventricular septal defect, persistent truncus arteriosus, reduced myocardial proliferation, and embryonic lethality around E13. Using an embryonic stem cell culture system that models the formation and differentiation of SHF CPCs in vivo, we have shown that BAF250a ablation in CPCs specifically inhibits cardiomyocyte formation. Moreover, BAF250a selectively regulates the expression of key cardiac factors Mef2c, Nkx2.5, and Bmp10 in SHF CPCs. Chromatin immunoprecipitation and DNase I digestion assays indicate that BAF250a regulates gene expression by binding selectively to its target gene promoters and recruiting Brg1, the catalytic subunit of SWI/SNF, to modulate chromatin accessibility. Our results thus identify BAF250a-mediated chromatin remodeling as an essential epigenetic mechanism mediating CPC differentiation.

  11. SWI/SNF Protein Component BAF250a Regulates Cardiac Progenitor Cell Differentiation by Modulating Chromatin Accessibility during Second Heart Field Development*

    Science.gov (United States)

    Lei, Ienglam; Gao, Xiaolin; Sham, Mai Har; Wang, Zhong

    2012-01-01

    ATP-dependent SWI/SNF chromatin remodeling complexes alter the structure of chromatin at specific loci and facilitate tissue-specific gene regulation during development. Several SWI/SNF subunits are required for cardiogenesis. However, the function and mechanisms of SWI/SNF in mediating cardiac progenitor cell (CPC) differentiation during cardiogenesis are not well understood. Our studies of the SWI/SNF chromatin remodeling complex identified that BAF250a, a regulatory subunit of the SWI/SNF, plays a key role in CPC differentiation. BAF250a ablation in mouse second heart field (SHF) led to trabeculation defects in the right ventricle, ventricular septal defect, persistent truncus arteriosus, reduced myocardial proliferation, and embryonic lethality around E13. Using an embryonic stem cell culture system that models the formation and differentiation of SHF CPCs in vivo, we have shown that BAF250a ablation in CPCs specifically inhibits cardiomyocyte formation. Moreover, BAF250a selectively regulates the expression of key cardiac factors Mef2c, Nkx2.5, and Bmp10 in SHF CPCs. Chromatin immunoprecipitation and DNase I digestion assays indicate that BAF250a regulates gene expression by binding selectively to its target gene promoters and recruiting Brg1, the catalytic subunit of SWI/SNF, to modulate chromatin accessibility. Our results thus identify BAF250a-mediated chromatin remodeling as an essential epigenetic mechanism mediating CPC differentiation. PMID:22621927

  12. BAF250B-associated SWI/SNF chromatin-remodeling complex is required to maintain undifferentiated mouse embryonic stem cells

    Science.gov (United States)

    Yan, Zhijiang; Wang, Zhong; Sharova, Lioudmila; Sharov, Alexei A.; Ling, Chen; Piao, Yulan; Aiba, Kazuhiro; Matoba, Ryo; Wang, Weidong; Ko, Minoru S.H.

    2008-01-01

    Whether SWI/SNF chromatin remodeling complexes play roles in embryonic stem (ES) cells remains unknown. Here we show that SWI/SNF complexes are present in mouse ES cells, and their composition is dynamically regulated upon induction of ES cell differentiation. For example, the SWI/SNF purified from undifferentiated ES cells contains a high level of BAF155 and a low level of BAF170 (both of which are homologs of yeast SWI3 protein), whereas that from differentiated cells contains near equal amounts of both. Moreover, the levels of BAF250A and BAF250B decrease, whereas that of BRM increases, during the differentiation of ES cells. The altered expression of SWI/SNF components hinted that these complexes could play roles in ES cell maintenance or differentiation. We therefore generated ES cells with biallelic inactivation of BAF250B, and found that these cells display a reduced proliferation rate and an abnormal cell cycle. Importantly, these cells are deficient in self-renewal capacity of undifferentiated ES cells, and exhibit certain phenotypes of differentiated cells, including reduced expression of several pluripotency-related genes, and increased expression of some differentiation-related genes. These data suggest that the BAF250B-associated SWI/SNF is essential for mouse ES cells to maintain its normal proliferation and pluripotency. The work presented here underscores the importance of SWI/SNF chromatin remodeling complexes in pluripotent stem cells. PMID:18323406

  13. Reactor Neutrinos

    OpenAIRE

    Soo-Bong Kim; Thierry Lasserre; Yifang Wang

    2013-01-01

    We review the status and the results of reactor neutrino experiments. Short-baseline experiments have provided the measurement of the reactor neutrino spectrum, and their interest has been recently revived by the discovery of the reactor antineutrino anomaly, a discrepancy between the reactor neutrino flux state of the art prediction and the measurements at baselines shorter than one kilometer. Middle and long-baseline oscillation experiments at Daya Bay, Double Chooz, and RENO provided very ...

  14. BOILING REACTORS

    Science.gov (United States)

    Untermyer, S.

    1962-04-10

    A boiling reactor having a reactivity which is reduced by an increase in the volume of vaporized coolant therein is described. In this system unvaporized liquid coolant is extracted from the reactor, heat is extracted therefrom, and it is returned to the reactor as sub-cooled liquid coolant. This reduces a portion of the coolant which includes vaporized coolant within the core assembly thereby enhancing the power output of the assembly and rendering the reactor substantially self-regulating. (AEC)

  15. Membrane reactor. Membrane reactor

    Energy Technology Data Exchange (ETDEWEB)

    Shindo, Y.; Wakabayashi, K. (National Chemical Laboratory for Industry, Tsukuba (Japan))

    1990-08-05

    Many reaction examples were introduced of membrane reactor, to be on the point of forming a new region in the field of chemical technology. It is a reactor to exhibit excellent function, by its being installed with membrane therein, and is generally classified into catalyst function type and reaction promotion type. What firstly belongs to the former is stabilized zirconia, where oxygen, supplied to the cathodic side of membrane with voltage, impressed thereon, becomes O {sup 2 {minus}} to be diffused through the membrane and supplied, as variously activated oxygenous species, on the anodic side. Examples with many advantages can be given such as methane coupling, propylene oxidation, methanating reaction of carbon dioxide, etc. Apart, palladium film and naphion film also belong to the former. While examples of the latter comprise, among others, decomposition of hydrogen sulfide by porous glass film and dehydrogenation of cyclohexane or palladium alloy film, which are expected to be developed and materialized in the industry. 33 refs., 8 figs.

  16. Optimal filtering

    CERN Document Server

    Anderson, Brian D O

    2005-01-01

    This graduate-level text augments and extends beyond undergraduate studies of signal processing, particularly in regard to communication systems and digital filtering theory. Vital for students in the fields of control and communications, its contents are also relevant to students in such diverse areas as statistics, economics, bioengineering, and operations research.Topics include filtering, linear systems, and estimation; the discrete-time Kalman filter; time-invariant filters; properties of Kalman filters; computational aspects; and smoothing of discrete-time signals. Additional subjects e

  17. Gd sub 2 SiO sub 5 (Ce sup 3 sup +) and BaF sub 2 measured electron and photon responses

    CERN Document Server

    Mengesha, W; Valentine, J D; Rooney, B D

    2002-01-01

    Gd sub 2 SiO sub 5 (Ce sup 3 sup +) (GSO) and BaF sub 2 electron responses were measured using the Compton Coincidence Technique (CCT). The CCT has previously been used to characterize several scintillators and has proven to be an accurate and reliable technique. The measured GSO electron response was observed to increase by 28% as the electron energy increased from 5 to 445 keV. The measured BaF sub 2 electron response increased 23% as the electron energy increased from 18 to 436 keV. Both electron responses become linear at higher electron energies (above about 200 keV). These observations made with GSO and BaF sub 2 in this study are consistent with the general trend reported for previous CCT characterized non-alkali halide scintillators. To validate the GSO and BaF sub 2 measured electron responses, respective photon responses were calculated and subsequently compared to measured photon response data. MCNP4C together with simplified electron cascade sequences for GSO and BaF sub 2 were used in these photo...

  18. Response of BaF 2 detectors to photons of 3-50 MeV energy

    Science.gov (United States)

    Matulewicz, T.; Grosse, E.; Emling, H.; Freifelder, R.; Grein, H.; Henning, W.; Herrmann, N.; Holzmann, R.; Kulessa, R.; Simon, R. S.; Wollersheim, H. J.; Schoch, B.; Vogt, J.; Wilhelm, M.; Kratz, J. V.; Schmidt, R.; Janssens, R. V. F.

    1990-04-01

    BaF 2 detectors of 20 cm length (10 radiation lengths) and hexagonal cross section (diameter 5.2 cm) were tested using monochromatic photons from the tagged-photon facility at the electron accelerator MAMIA at Mainz. The experimental spectra the deposited energy for a single detector and for an array of seven modules compare very well with the predictions of Monte Carlo shower simulations using the code GEANT3. At high photon energies a significant improvement (more than a factor 2) of the energy resolution is observed for the summed energy spectra as compared to the resolution of one single module.

  19. Scintillation light simulation in big-sized BaF$_{2}$ and pure CsI crystals

    CERN Document Server

    Usubov, Zafar

    2016-01-01

    We have investigated scintillation light distribution in BaF$_{2}$ and pure CsI crystals with dimensions 3x3x20 cm$^{3}$ using the Geant4 toolkit. The diffuse wrapping material is selected as coating for the crystals. The simulated cosmic muons and 105 MeV electrons are used as beam particles. The optical attenuation along the crystals is explored with the simulation data. We have demonstrated the impact of the crystal surface finish on the light distribution at the crystal end, optical photon arrival time, incidence angle distributions, and optical attenuation for the studied crystals.

  20. Design of Harmonics-Caused Thermal Overload Protection for AC Filter Reactor and Its Application in HVDC Power Transmission Projects%交流滤波器电抗器谐波热过负荷保护设计及其在直流工程中的应用

    Institute of Scientific and Technical Information of China (English)

    张民; 贺仁睦; 李泰; 孙哲

    2013-01-01

    In HVDC power transmission projects the thermal overload of AC filter reactor may occur due to harmonic currents. The harmonics-caused thermal overload protection is the main protection for the reactor to avoid the damage due to thermal overload, so it is necessary for the correct configuraion of related protection parameters to understand the principle of this protection and master its design and implementation. The design and implementation of harmonics-caused thermal overload protection for AC filter reactor are researched in depth, and the skin-effect of harmonic currents, the determination of filter paramters, protection algorithm and setting calculation are analyzed in detail, and according to the designed withstanding ability of AC filter reactor to harmonic currents the correctness of the desing and related paramters are checked by PSCAD/EMTDC simulation. Based on the presented method and according to the skin-effect coefficient provided by reactor manufacturer the parameters of skin-effect filter can be calculated, and according to thermal equivalent current of harmonic currents the setting of the protection can be calculated. The proposed method is available for reference to the configuration of thermal overload protection for AC filter reactor used in HVDC projects.%在直流输电工程中,交流滤波器电抗器在谐波电流的作用下会出现发热或过载现象,电抗器谐波热过负荷保护是避免电抗器因过热导致损坏的主保护,理解并掌握该保护的设计原理及实现过程才能在实际工程中正确配置保护相关参数,详细研究了交流滤波器电抗器热过负荷保护的设计及实现方法,对保护中的集肤效应滤波器参数确定方法、保护算法、定值计算均进行了详细分析,并根据交流滤波器电抗器耐受谐波电流设计能力通过PSCAD/EMTDC仿真计算校核了保护设计及相关参数的正确性,在实际工程中可以按照所述方法根据电抗器生产厂

  1. Synergism of Novel Sequence Bio-ecological Process and Biological Aerated Filter for Sewage Treatment in Cold Climate

    Institute of Scientific and Technical Information of China (English)

    张鹏; 海热提; 周东凯; 何一群; 白志远

    2011-01-01

    A lab-scale integrated treatment system including the novel sequence bio-ecological process (SBEP) and biological aerated filter (BAF) for a sewage mixture (chemistry laboratory wastewater and domestic sewage) was presented in this paper. The main objective of the study was to test the contribution of artificial aeration, recir-culation ratio and mass concentration of steel slag on pollutant removal in winter when the plants are dormant. It had been shown that SBEP and BAF play different roles in removing contaminants from wastewater. During the airflow experiment, the removal efficiency of COD and TP in SBEP was higher than that in BAF, whereas BAF can compensate for the deficiency of SBEP where no significant improvement on ammonium nitrogen removal is ob-served. Yet, the removal etticiencies of COD,TP and NH4^+ -N in SBEP could be improved apparently when ditterent recireulation ratio or various mass concentration of steel were applied. Especially, when the airflow of 0.06 L·h^-1, the recirculation ratio rate of 80% and the mass concentration of steel of 2.2-2.4 g·L^-1 were applied, thehighest efficiency of 94.6%, 77.9% and 80.7% for COD, TP and NH4^+ -N were achieved,-respectively,The integrated treatment system of SBEP and BAF was proved to be an effective wastewater treatment technique and a better alternative to treat domestic sewage.

  2. Effect of media heights on the performance of biological aerated filter

    Institute of Scientific and Technical Information of China (English)

    HU Yong-you; WANG Li-li

    2005-01-01

    The optimum media height of carbon oxidation and nitrification in a down-flow biological aerated filter was determined, and the distribution of the heterotrophic and nitrifying populations through studying the changes of organic carbon contents and ammonia concentration at different media height was got. The results showed that as a down flow BAF with granular media, the active layer of nitrifiers was deeper than heterotrophs in BAF. And the optimum media height for the removal of SS, CODCr and NH4+ -N was 40 cm,60 cm and 80 cm respectively. The removal efficiency of SS, CODCr and NH4+-N was 79.1%, 63.9% and 96.4% respectively under the influent CODCr and NH4+ -N of 122.1 mgCODCr/L and 14.84 mgNH4+ -N/L, the influent flux of 15.8 L/h, air to liquid ratio of 3: 1.

  3. Multifunctional reactors

    NARCIS (Netherlands)

    Westerterp, K.R.

    1992-01-01

    Multifunctional reactors are single pieces of equipment in which, besides the reaction, other functions are carried out simultaneously. The other functions can be a heat, mass or momentum transfer operation and even another reaction. Multifunctional reactors are not new, but they have received much

  4. Enhanced 2.0 microm emission and gain coefficient of transparent glass ceramic containing BaF2: Ho3+,Tm3+ nanocrystals.

    Science.gov (United States)

    Zhang, W J; Zhang, Q Y; Chen, Q J; Qian, Q; Yang, Z M; Qiu, J R; Huang, P; Wang, Y S

    2009-11-09

    Transparent glass ceramic containing BaF(2):Ho(3+),Tm(3+) nanocrystals has been prepared by melt quenching and subsequent thermal treatment. The precipitation of BaF(2) nanocrystals was confirmed by X-ray diffraction and high-resolution transmission electron microscopy. Intense 2.0 microm fluorescence originating from Ho(3+): (5)I(7) --> (5)I(8) transition was achieved upon excitation with 808 nm laser diode. A large ratio of forward Tm(3+) --> Ho(3+) energy transfer constant to that of backward process indicated high efficient energy transfer from Tm(3+)((3)F(4)) to Ho(3+)((5)I(7)), benefited from the reduced ionic distances of Tm(3+)-Tm(3+) and Tm(3+)-Ho(3+) pairs and low phonon energy environment with the incorporation of rare-earth ions into the precipitated BaF(2) nanocrystals. The results indicate that glass ceramic is a promising candidate material for 2.0 microm laser.

  5. Defect-induced wetting on BaF 2(111) and CaF 2(111) at ambient conditions

    Science.gov (United States)

    Cardellach, M.; Verdaguer, A.; Fraxedas, J.

    2011-12-01

    The interaction of water with freshly cleaved (111) surfaces of isostructural BaF2 and CaF2 single crystals at ambient conditions (room temperature and under controlled humidity) has been studied using scanning force microscopy in different operation modes and optical microscopy. Such surfaces exhibit contrasting behaviors for both materials: while on BaF2(111) two-dimensional water layers are formed after accumulation at step edges, CaF2(111) does not promote the formation of such layers. We attribute such opposed behavior to lattice match (mismatch) between hexagonal water ice and the hexagonal (111) surfaces of BaF2(CaF2). Optical microscope images reveal that this behavior also determines the way the surfaces become wetted at a macroscopic level.

  6. HIC1 interacts with a specific subunit of SWI/SNF complexes, ARID1A/BAF250A

    Energy Technology Data Exchange (ETDEWEB)

    Van Rechem, Capucine; Boulay, Gaylor [CNRS UMR 8161, Institut de Biologie de LILLE, Universite de Lille Nord de FRANCE, Institut PASTEUR de LILLE, IFR 142, 1 Rue Calmette, 59017 LILLE Cedex (France); Leprince, Dominique, E-mail: dominique.leprince@ibl.fr [CNRS UMR 8161, Institut de Biologie de LILLE, Universite de Lille Nord de FRANCE, Institut PASTEUR de LILLE, IFR 142, 1 Rue Calmette, 59017 LILLE Cedex (France)

    2009-08-07

    HIC1, a tumor suppressor gene epigenetically silenced in many human cancers encodes a transcriptional repressor involved in regulatory loops modulating p53-dependent and E2F1-dependent cell survival and stress responses. HIC1 is also implicated in growth control since it recruits BRG1, one of the two alternative ATPases (BRM or BRG1) of SWI/SNF chromatin-remodeling complexes to repress transcription of E2F1 in quiescent fibroblasts. Here, through yeast two-hybrid screening, we identify ARID1A/BAF250A, as a new HIC1 partner. ARID1A/BAF250A is one of the two mutually exclusive ARID1-containing subunits of SWI/SNF complexes which define subsets of complexes endowed with anti-proliferative properties. Co-immunoprecipitation assays in WI38 fibroblasts and in BRG1-/- SW13 cells showed that endogenous HIC1 and ARID1A proteins interact in a BRG1-dependent manner. Furthermore, we demonstrate that HIC1 does not interact with BRM. Finally, sequential chromatin immunoprecipitation (ChIP-reChIP) experiments demonstrated that HIC1 represses E2F1 through the recruitment of anti-proliferative SWI/SNF complexes containing ARID1A.

  7. System design for precise digitization and readout of the CSNS-WNS BaF2 spectrometer

    Science.gov (United States)

    Zhang, De-Liang; Cao, Ping; Wang, Qi; He, Bing; Zhang, Ya-Xi; Qi, Xin-Cheng; Yu, Tao; An, Qi

    2017-02-01

    The BaF2 (barium fluoride) spectrometer is one of the experiment facilities at the CSNS-WNS (White Neutron Source at China Spallation Neutron Source), currently under construction. It is designed to precisely measure the (n, γ) cross section, with 92 crystal elements and complete 4π steradian coverage. In order to improve the precision of measurement, in this paper, a new precise digitization and readout method is proposed. Waveform digitizing with 1 GSps sampling rate and 12-bit resolution is used to precisely capture the detector signal. To solve the problem of massive data readout and processing, the readout electronics is designed as a distributed architecture with 4 PXIe crates. The digitized signal is concentrated to the PXIe crate controller through a PCIe bus on the backplane and transmitted to the data acquisition system over gigabit Ethernet in parallel. Besides, the clock and trigger can be fanned out synchronously to every electronic channel over a high-precision distribution network. Test results show that the prototype of the readout electronics can achieve good performance and meet the requirements of the CSNS-WNS BaF2 spectrometer. Supported by National Research and Development plan (2016YFA0401602) and NSAF (U1530111)

  8. Ultraviolet filters.

    Science.gov (United States)

    Shaath, Nadim A

    2010-04-01

    The chemistry, photostability and mechanism of action of ultraviolet filters are reviewed. The worldwide regulatory status of the 55 approved ultraviolet filters and their optical properties are documented. The photostabilty of butyl methoxydibenzoyl methane (avobenzone) is considered and methods to stabilize it in cosmetic formulations are presented.

  9. Reactor vessel

    OpenAIRE

    Makkee, M.; Kapteijn, F.; Moulijn, J.A

    1999-01-01

    A reactor vessel (1) comprises a reactor body (2) through which channels (3) are provided whose surface comprises longitudinal inwardly directed parts (4) and is provided with a catalyst (6), as well as buffer bodies (8, 12) connected to the channels (3) on both sides of the reactor body (2) and comprising connections for supplying (9, 10, 11) and discharging (13, 14, 15) via the channels (3) gases and/or liquids entering into a reaction with each other and substances formed upon this reactio...

  10. Performance of a multipurpose research electrochemical reactor

    Energy Technology Data Exchange (ETDEWEB)

    Henquin, E.R. [Programa de Electroquimica Aplicada e Ingenieria Electroquimica (PRELINE), Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2829, S3000AOM Santa Fe (Argentina); Bisang, J.M., E-mail: jbisang@fiq.unl.edu.ar [Programa de Electroquimica Aplicada e Ingenieria Electroquimica (PRELINE), Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2829, S3000AOM Santa Fe (Argentina)

    2011-07-01

    Highlights: > For this reactor configuration the current distribution is uniform. > For this reactor configuration with bipolar connection the leakage current is small. > The mass-transfer conditions are closely uniform along the electrode. > The fluidodynamic behaviour can be represented by the dispersion model. > This reactor represents a suitable device for laboratory trials. - Abstract: This paper reports on a multipurpose research electrochemical reactor with an innovative design feature, which is based on a filter press arrangement with inclined segmented electrodes and under a modular assembly. Under bipolar connection, the fraction of leakage current is lower than 4%, depending on the bipolar Wagner number, and the current distribution is closely uniform. When a turbulence promoter is used, the local mass-transfer coefficient shows a variation of {+-}10% with respect to its mean value. The fluidodynamics of the reactor responds to the dispersion model with a Peclet number higher than 10. It is concluded that this reactor is convenient for laboratory research.

  11. Chemical Reactors.

    Science.gov (United States)

    Kenney, C. N.

    1980-01-01

    Describes a course, including content, reading list, and presentation on chemical reactors at Cambridge University, England. A brief comparison of chemical engineering education between the United States and England is also given. (JN)

  12. Reactor Neutrinos

    Directory of Open Access Journals (Sweden)

    Soo-Bong Kim

    2013-01-01

    Full Text Available We review the status and the results of reactor neutrino experiments. Short-baseline experiments have provided the measurement of the reactor neutrino spectrum, and their interest has been recently revived by the discovery of the reactor antineutrino anomaly, a discrepancy between the reactor neutrino flux state of the art prediction and the measurements at baselines shorter than one kilometer. Middle and long-baseline oscillation experiments at Daya Bay, Double Chooz, and RENO provided very recently the most precise determination of the neutrino mixing angle θ13. This paper provides an overview of the upcoming experiments and of the projects under development, including the determination of the neutrino mass hierarchy and the possible use of neutrinos for society, for nonproliferation of nuclear materials, and geophysics.

  13. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  14. Reactor Engineering

    Science.gov (United States)

    Lema, Juan M.; López, Carmen; Eibes, Gemma; Taboada-Puig, Roberto; Moreira, M. Teresa; Feijoo, Gumersindo

    In this chapter, the engineering aspects of processes catalyzed by peroxidases will be presented. In particular, a discussion of the existing technologies that utilize peroxidases for different purposes, such as the removal of recalcitrant compounds or the synthesis of polymers, is analyzed. In the first section, the essential variables controlling the process will be investigated, not only those that are common in any enzymatic system but also those specific to peroxidative reactions. Next, different reactor configurations and operational modes will be proposed, emphasizing their suitability and unsuitability for different systems. Finally, two specific reactors will be described in detail: enzymatic membrane reactors and biphasic reactors. These configurations are especially valuable for the treatment of xenobiotics with high and poor water solubility, respectively.

  15. Reactor Neutrinos

    OpenAIRE

    Lasserre, T.; Sobel, H.W.

    2005-01-01

    We review the status and the results of reactor neutrino experiments, that toe the cutting edge of neutrino research. Short baseline experiments have provided the measurement of the reactor neutrino spectrum, and are still searching for important phenomena such as the neutrino magnetic moment. They could open the door to the measurement of coherent neutrino scattering in a near future. Middle and long baseline oscillation experiments at Chooz and KamLAND have played a relevant role in neutrin...

  16. Food Filter

    Institute of Scientific and Technical Information of China (English)

    履之

    1995-01-01

    A typical food-processing plant produces about 500,000 gallons of waste water daily. Laden with organic compounds, this water usually is evaporated or discharged into sewers.A better solution is to filter the water through

  17. Spectroscopic properties of Pr3+ and Er3+ ions in lead-free borate glasses modified by BaF2

    Science.gov (United States)

    Pisarska, Joanna; Pisarski, Wojciech A.; Dorosz, Dominik; Dorosz, Jan

    2015-09-01

    Lead-free oxyfluoride borate glasses singly doped with Pr3+ and Er3+ were prepared and next investigated using absorption and luminescence spectroscopy. In the studied glass system, barium oxide was substituted by BaF2. Two luminescence bands of Pr3+ located at visible spectral region are observed, which correspond to 3P0-3H4 (blue) and 1D2-3H4 (reddish orange) transitions, respectively. The luminescence bands due to 1D2-3H4 transition of Pr3+ are shifted to shorter wavelengths, when BaO was substituted by BaF2. Near-infrared luminescence spectra of Er3+ ions in lead-free borate glasses modified by BaF2 correspond to 4I13/2-4I15/2 transition. Their spectral linewidths increase with increasing BaF2 concentration. The changes in measured lifetimes of rare earth ions are well correlated with the bonding parameters calculated from the optical absorption spectra.

  18. A Unique TAS Setup for high multiplicity events at VECC, Kolkata using BaF2 detectors

    Directory of Open Access Journals (Sweden)

    Mukherjee G.

    2014-03-01

    Full Text Available A granular total absorption spectrometer (TAS has been developed at the Variable Energy Cyclotron Centre, Kolkata, India using 50 elements of BaF2 detectors and covering 4π. The advantage with such a granular setup is that one can get sum spectrum with the condition of different multiplicity hits in an event. It has been shown that one can get clean sum-peaks devoid of individual peaks with the choice of two or higher fold of multiplicity. The large granularity makes it a unique TAS setup particularly for the high multiplicity events. The set up has been tested using different radioactive sources with one, two or multiple γ rays in cascade. The set up is ready to be used online.

  19. Test of the statistical model in Mo96 with the BaF2γ calorimeter DANCE array

    Science.gov (United States)

    Sheets, S. A.; Agvaanluvsan, U.; Becker, J. A.; Bečvář, F.; Bredeweg, T. A.; Haight, R. C.; Jandel, M.; Krtička, M.; Mitchell, G. E.; O'Donnell, J. M.; Parker, W.; Reifarth, R.; Rundberg, R. S.; Sharapov, E. I.; Ullmann, J. L.; Vieira, D. J.; Wilhelmy, J. B.; Wouters, J. M.; Wu, C. Y.

    2009-02-01

    The γ-ray cascades following the Mo95(n,γ)Mo96 reaction were studied with the γ calorimeter DANCE (Detector for Advanced Neutron Capture Experiments) consisting of 160 BaF2 scintillation detectors at the Los Alamos Neutron Science Center. The γ-ray energy spectra for different multiplicities were measured for s- and p-wave resonances below 2 keV. The shapes of these spectra were found to be in very good agreement with simulations using the DICEBOX statistical model code. The relevant model parameters used for the level density and photon strength functions were identical with those that provided the best fit of the data from a recent measurement of the thermal Mo95(n,γ)Mo96 reaction with the two-step-cascade method. The reported results strongly suggest that the extreme statistical model works very well in the mass region near A=100.

  20. Leak test of the charcoal filter in the nuclear facility

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Sang Yeol; Lee, Key Soon; Hong, Kwon Pyo; Oh, Yon Woo; Park, Dae Kyu; Ahn, Sang Bok; Choo, Yong Sun; Kim, Sung Jung

    1998-06-01

    In the heating, ventilation and air conditioning(HVAC) system, pre-filter, HEPA(high efficiency particle air) filter and charcoal filter are instrumented in order to filter off the radioactive substance in the nuclear facility. Equipment of the charcoal filter off the radioactive substance in the nuclear facility. Equipment of the charcoal filter at the hot cell where manipulates the nuclear fuel irradiated in the nuclear reactor is essential for shutting off the leakage of the radioiodine which is produced from the cutting procedures of nuclear fuel. Also, the leak test of installed filter should be performed perfectly. In addition, charcoal filter is instrumented to filter the radioactive gas such as radioiodine which is produced in the nuclear facility. In this technical report, the theoretical discussion, the experimental procedures and the precautions of the leak test of charcoal filter are described. (author). 8 refs., 4 tabs., 8 figs.

  1. Bioconversion reactor

    Science.gov (United States)

    McCarty, Perry L.; Bachmann, Andre

    1992-01-01

    A bioconversion reactor for the anaerobic fermentation of organic material. The bioconversion reactor comprises a shell enclosing a predetermined volume, an inlet port through which a liquid stream containing organic materials enters the shell, and an outlet port through which the stream exits the shell. A series of vertical and spaced-apart baffles are positioned within the shell to force the stream to flow under and over them as it passes from the inlet to the outlet port. The baffles present a barrier to the microorganisms within the shell causing them to rise and fall within the reactor but to move horizontally at a very slow rate. Treatment detention times of one day or less are possible.

  2. Low-temperature post-treatment of anaerobically treated-sewage in anaerobic filter with cationic-polymer addition

    NARCIS (Netherlands)

    Elmitwalli, T.A.; Raimundo, R.; Kujawa-Roeleveld, K.; Zeeman, G.

    2006-01-01

    The post-treatment of domestic sewage pretreated in a 6m3 UASB was investigated in two high-rate anaerobic filter (AF) reactors operated in parallel. The difference between the two AF reactors was only the addition of cationic polymer to the second reactor (AF + P). The reactors were operated at low

  3. Study on determination of biofilm activity in BAF by TTC-dehydrogenase assay%优化TTC-脱氢酶还原法测定陶粒负载微生物活性

    Institute of Scientific and Technical Information of China (English)

    齐鲁青; 汪晓军; 詹德明

    2012-01-01

    利用氯化三苯基四氮唑(TTC)-脱氢酶还原法定量测定了曝气生物滤池中陶粒负载生物膜的活性,并对影响生物活性测定的因素进行了分析和优化.实验表明,经优化后得出最佳培养条件是:陶粒采用原位法制样,依次加入pH为8.0的Tris-HCl缓冲液,质量分数为0.4%的TTC溶液,0.1 mol/L葡萄糖溶液,在温度40℃下培养4h,最后生成的三苯基甲臢(TriphenylFormazone,TF)用甲苯萃取可以除去有色废水的颜色影响.采用TTC-脱氢酶还原法可以快速、方便的检测曝气生物滤池中陶粒负载生物膜的生物活性,并能很好的进行定量化测定.%The biofilms activity in Biological Aerated Filters (BAF) is quantitatively determined by 2,3,5-triphenyl tetrazolium chloride (TTC) -dehydrogenase assay and some major factors influencing the determination are studied in this paper. The optimum parameters are shown as follows: Tris-HCl buffers and 8. 0 of pH, 0. 4% ( mass fraction) of TTC and 0. 1 mol/L of dextrose solution. The incubation time and temperature are 4 h and 401 , respectively. The formazan reduction product can be efficiently extracted by methylbenzene, which can reduce the disturbance of dye color. This study demonstrates that the TTC-dehydrogenase assay can be successfully applied to the determination of biofilms activity in BAF.

  4. Reactor and method for production of nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Sunkara, Mahendra Kumar; Kim, Jeong H.; Kumar, Vivekanand

    2017-04-25

    A reactor and method for production of nanostructures, including metal oxide nanowires or nanoparticles, are provided. The reactor includes a regulated metal powder delivery system in communication with a dielectric tube; a plasma-forming gas inlet, whereby a plasma-forming gas is delivered substantially longitudinally into the dielectric tube; a sheath gas inlet, whereby a sheath gas is delivered into the dielectric tube; and a microwave energy generator coupled to the dielectric tube, whereby microwave energy is delivered into a plasma-forming gas. The method for producing nanostructures includes providing a reactor to form nanostructures and collecting the formed nanostructures, optionally from a filter located downstream of the dielectric tube.

  5. Sonochemical Reactors.

    Science.gov (United States)

    Gogate, Parag R; Patil, Pankaj N

    2016-10-01

    Sonochemical reactors are based on the generation of cavitational events using ultrasound and offer immense potential for the intensification of physical and chemical processing applications. The present work presents a critical analysis of the underlying mechanisms for intensification, available reactor configurations and overview of the different applications exploited successfully, though mostly at laboratory scales. Guidelines have also been presented for optimum selection of the important operating parameters (frequency and intensity of irradiation, temperature and liquid physicochemical properties) as well as the geometric parameters (type of reactor configuration and the number/position of the transducers) so as to maximize the process intensification benefits. The key areas for future work so as to transform the successful technique at laboratory/pilot scale into commercial technology have also been discussed. Overall, it has been established that there is immense potential for sonochemical reactors for process intensification leading to greener processing and economic benefits. Combined efforts from a wide range of disciplines such as material science, physics, chemistry and chemical engineers are required to harness the benefits at commercial scale operation.

  6. Neutron imaging on the VR-1 reactor

    Science.gov (United States)

    Crha, J.; Sklenka, L.; Soltes, J.

    2016-09-01

    Training reactor VR-1 is a low power research reactor with maximal thermal power of 1 kW. The reactor is operated by the Faculty of Nuclear Science and Physical Engineering of the Czech Technical University in Prague. Due to its low power it suits as a tool for education of university students and training of professionals. In 2015, as part of student research project, neutron imaging was introduced as another type of reactor utilization. The low available neutron flux and the limiting spatial and construction capabilities of the reactor's radial channel led to the development of a special filter/collimator insertion inside the channel and choosing a nonstandard approach by placing a neutron imaging plate inside the channel. The paper describes preliminary experiments carried out on the VR-1 reactor which led to first radiographic images. It seems, that due to the reactor construction and low reactor power, the neutron imaging technique on the VR-1 reactor is feasible mainly for demonstration or educational and training purposes.

  7. Generalised Filtering

    Directory of Open Access Journals (Sweden)

    Karl Friston

    2010-01-01

    Full Text Available We describe a Bayesian filtering scheme for nonlinear state-space models in continuous time. This scheme is called Generalised Filtering and furnishes posterior (conditional densities on hidden states and unknown parameters generating observed data. Crucially, the scheme operates online, assimilating data to optimize the conditional density on time-varying states and time-invariant parameters. In contrast to Kalman and Particle smoothing, Generalised Filtering does not require a backwards pass. In contrast to variational schemes, it does not assume conditional independence between the states and parameters. Generalised Filtering optimises the conditional density with respect to a free-energy bound on the model's log-evidence. This optimisation uses the generalised motion of hidden states and parameters, under the prior assumption that the motion of the parameters is small. We describe the scheme, present comparative evaluations with a fixed-form variational version, and conclude with an illustrative application to a nonlinear state-space model of brain imaging time-series.

  8. Notch filter

    Science.gov (United States)

    Shelton, G. B. (Inventor)

    1977-01-01

    A notch filter for the selective attenuation of a narrow band of frequencies out of a larger band was developed. A helical resonator is connected to an input circuit and an output circuit through discrete and equal capacitors, and a resistor is connected between the input and the output circuits.

  9. Fenton/BAF组合工艺处理全棉机织布印染废水研究%Fenton Oxidation/BAF Process for Advanced Treatment of Wastewater from Dyeing and Finishing of Cotton Woven Fabrics

    Institute of Scientific and Technical Information of China (English)

    文淦斌; 黄瑞敏; 黄春梅; 王君

    2011-01-01

    The dyeing and finishing processes of cotton woven fabrics need a lot of sizing agents toimprove the smoothness and wear resistance of the fabrics, thus the discharged wastewater often contains a lot of desizing wastewater, which has high concentration of COD, strong alkalinity and poor biodegradability. The biodegradability is difficult to be improved using conventional coagulation sedimentation/anaerobic/aerobic process, and the effluent COD and color are difficult to meet the standards. According to the characteristics above, the combined process of Fenton oxidation and biological aerated filter (BAF) was used for the advanced treatment. The results of the pilot study show that under the conditions of initial pH of 4, H2O2 dosage of 150 mg/L, Fe2+/H2O2 ratio of 1 and reaction time of 60 min in Fenton oxidation process, COD and color of the wastewater are reduced from 400 mg/L to 125 mg/L with the removal rate of 68.75% and from 200 times to less than 25 times respectively. After the Fenton oxidation,the B/C ratio is increased from 0.08 to 0.34, and the biodegradability is significantly improved. Under the condition of HRT of 2.5 h, COD in the effluent from BAF is 74.5 mg/L, with the removal rate of 40.4%. After treatment by the combined process, the removal rate of COD is more than 80% , and the color is less than 25 times, with good treatment efficiency.%全棉机织布染色加工需使用大量浆料助剂进行上浆处理以提高织物的光滑度及耐磨性,因而排放的废水中往往含有大量的退浆废水,其COD浓度高、碱度强、可生化性差,经常规的混凝沉淀/厌氧/好氧组合工艺处理后,可生化性难以改善,出水COD、色度值难以达标.采用Fen-ton/曝气生物滤池(BAF)组合工艺对其进行深度处理,中试结果表明,在Fenton工艺的初始pH值=4、H2O2投加量=150 mg/L、Fe2+/H2O2值=1、反应时间为60 min的条件下,COD由原来的400mg/L降低至125 mg/L,去除率达68.75%,色度由200

  10. Complex Refractive Index Measurements for BaF2 and CaF2 via Single-Angle Infrared Reflectance Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kelly-Gorham, Molly Rose K.; De Vetter, Brent M.; Brauer, Carolyn S.; Cannon, Bret D.; Burton, Sarah D.; Bliss, Mary; Johnson, Timothy J.; Myers, Tanya L.

    2017-10-01

    We have re-investigated the optical constants n and k for the homologous series of inorganic salts barium fluoride (BaF2) and calcium fluoride (CaF2) using a single-angle near-normal incidence reflectance device in combination with a calibrated Fourier transform infrared (FTIR) spectrometer. Our results are in good qualitative agreement with most previous works. However, certain features of the previously published data near the reststrahlen band exhibit distinct differences in spectral characteristics. Notably, our measurements of BaF2 do not include a spectral feature in the ~250 cm-1 reststrahlen band that was previously published. Additionally, CaF2 exhibits a distinct wavelength shift relative to the model derived from previously published data. We confirmed our results with recently published works that use significantly more modern instrumentation and data reduction techniques

  11. Ultralow threshold green lasing and optical bistability in ZBNA (ZrF4-BaF2-NaF-AlF3) microspheres

    Science.gov (United States)

    Wu, Yuqiang; Ward, Jonathan M.; Nic Chormaic, Síle

    2010-02-01

    Upconversion lasing and fluorescence from active microspheres fabricated from a novel fluorozirconate, Er3+ doped glass, ZBNA (ZrF4-BaF2-NaF-AlF3), when pumped at 978 nm via a tapered optical fiber is demonstrated. An ultralow, green lasing threshold of ˜3 μW for 550 nm emissions is measured. This is one order of magnitude lower than that previously reported for ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) microspheres. Optical bistability effects in ZBNA microspheres are reported and the bistable mechanism is discussed and attributed to shifts of the whispering gallery modes due to thermal expansion of the sphere, where heating is achieved by optical pumping around 978 nm. The effect of the bistability on the upconversion lasing is examined and we report multiple bistability loops within the microspheres.

  12. Ho3+/Yb3+ co-doped TeO2-BaF2-Y2O3 glasses for ∼1.2 μm laser applications

    Science.gov (United States)

    Wang, Shunbin; Li, Chengzhi; Yao, Chuanfei; Jia, Shijie; Jia, Zhixu; Qin, Guanshi; Qin, Weiping

    2017-02-01

    Intense ∼1.2 μm fluorescence is observed in Ho3+/Yb3+ co-doped TeO2-BaF2-Y2O3 glasses under 915 nm laser diode excitation. The 1.2 μm emission can be ascribed to the transition 5I6→5I8 of Ho3+. With the introducing of BaF2, the content of OH in the glasses drops markedly, and the 1.2 μm emission intensity increases gradually as increasing the concentration percentage of BaF2. Furthermore, microstructured fibers based on the TeO2-BaF2-Y2O3 glasses are fabricated by using a rod-in-tube method, and a relative positive gain of ∼9.42 dB at 1175.3 nm is obtained in a 5 cm long fiber.

  13. Transients in reactors for power systems compensation

    Science.gov (United States)

    Abdul Hamid, Haziah

    This thesis describes new models and investigations into switching transient phenomena related to the shunt reactors and the Mechanically Switched Capacitor with Damping Network (MSCDN) operations used for reactive power control in the transmission system. Shunt reactors and MSCDN are similar in that they have reactors. A shunt reactor is connected parallel to the compensated lines to absorb the leading current, whereas the MSCDN is a version of a capacitor bank designed as a C-type filter for use in the harmonic-rich environment. In this work, models have been developed and transient overvoltages due to shunt reactor deenergisation were estimated analytically using MathCad, a mathematical program. Computer simulations used the ATP/EMTP program to reproduce both single-phase and three-phase shunt reactor switching at 275 kV operational substations. The effect of the reactor switching on the circuit breaker grading capacitor was also examined by considering various switching conditions.. The main original achievement of this thesis is the clarification of failure mechanisms occurring in the air-core filter reactor due to MSCDN switching operations. The simulation of the MSCDN energisation was conducted using the ATP/EMTP program in the presence of surge arresters. The outcome of this simulation shows that extremely fast transients were established across the air-core filter reactor. This identified transient event has led to the development of a detailed air-core reactor model, which accounts for the inter-turn RLC parameters as well as the stray capacitances-to-ground. These parameters are incorporated into the transient simulation circuit, from which the current and voltage distribution across the winding were derived using electric field and equivalent circuit modelling. Analysis of the results has revealed that there are substantial dielectric stresses imposed on the winding insulation that can be attributed to a combination of three factors. (i) First, the

  14. Scintillators for photon detection at medium energies--a comparative study of BaF sub 2 , CeF sub 3 and PbWO sub 4

    CERN Document Server

    Novotny, R; Döring, W; Hejny, V; Hoek, M; Hofstäetter, A; Metag, V; Roemer, K

    2002-01-01

    In a comparative study, the performance of sub-arrays consisting of large CeF sub 3 and PbWO sub 4 crystals has been investigated with high-energy photons below 1 GeV. Energy and time resolutions are determined and compared with the corresponding values for BaF sub 2 based on the experience of operating the electromagnetic calorimeter TAPS.

  15. CCR7 is involved in BCR-ABL/STAP-2-mediated cell growth in hematopoietic Ba/F3 cells.

    Science.gov (United States)

    Kubo, Kaori; Iwakami, Masashi; Muromoto, Ryuta; Inagaki, Takuya; Kitai, Yuichi; Kon, Shigeyuki; Sekine, Yuichi; Oritani, Kenji; Matsuda, Tadashi

    2015-08-07

    Chronic myeloid leukemia is a clonal disease characterized by the presence of the Philadelphia chromosome and its oncogenic product, BCR-ABL, which activates multiple pathways involved in cell survival, growth promotion, and disease progression. We previously reported that in murine hematopoietic Ba/F3 cells, signal transducing adaptor protein-2 (STAP-2) binds to BCR-ABL and up-regulates BCR-ABL phosphorylation, leading to enhanced activation of its downstream signaling molecules. The binding of STAP-2 to BCR-ABL also influenced the expression levels of chemokine receptors, such as CXCR4 and CCR7. For the induction of CCR7 expression, signals mediated by the MAPK/ERK pathway were critical in Ba/F3 cells expressing BCR-ABL and STAP-2. In addition, STAP-2 cooperated with BCR-ABL to induce the production of CCR7 ligands, CCL19 and CCL21. Our results demonstrate a contribution of CCR7 to STAP-2-dependent enhancement of BCR-ABL-mediated cell growth in Ba/F3 cells.

  16. Optical characterization of Tm3+ doped Bi2O3-GeO2-Ga2O3 glasses in absence and presence of BaF2

    Science.gov (United States)

    Han, Kexuan; Zhang, Peng; Wang, Shunbin; Guo, Yanyan; Zhou, Dechun; Yu, Fengxia

    2016-08-01

    In this paper, Two new Bi2O3-GeO2-Ga2O3 glasses (one presence of BaF2) doped with 1mol% Tm2O3 were prepared by melt-quenching technique. Differential thermal analysis (DTA), the absorption, Raman, IR spectra and fluorescence spectra were measured. The Judd-Ofelt intensity parameters, emission cross section, absorption cross section, and gain coefficient of Tm3+ ions were comparatively investigated. After the BaF2 introduced, the glass showed a better thermal stability, lower phonon energy and weaker OH- absorption coefficient, meanwhile, a larger ~1.8 μm emission cross section σem (7.56 × 10-21 cm2) and a longer fluorescence lifetime τmea (2.25 ms) corresponding to the Tm3+: 4F3 → 3H6 transition were obtained, which is due to the addition of fluoride in glass could reduce the quenching rate of hydroxyls and raise the cross-relaxation (3H6 + 3H4 → 3F4 + 3F4) rate. Our results suggest that the Tm3+ doped Bi2O3-GeO2-Ga2O3 glass with BaF2 might be potential to the application in efficient ~1.8 μm lasers system.

  17. Luminescence properties of dual valence Eu doped nano-crystalline BaF2 embedded glass-ceramics and observation of Eu2+ → Eu3+ energy transfer.

    Science.gov (United States)

    Biswas, Kaushik; Sontakke, Atul D; Sen, R; Annapurna, K

    2012-03-01

    Europium doped glass-ceramics containing BaF(2) nano-crystals have been prepared by using the controlled crystallization of melt-quenched glasses. X-ray diffraction and transmission electron microscopy have confirmed the presence of cubic BaF(2) nano-crystalline phase in glass matrix in the ceramized samples. Incorporation of rare earth ions into the formed crystalline phase having low phonon energy of 346 cm(-1) has been demonstrated from the emission spectra of Eu(3+) ions showing the transitions from upper excitation states (5)D(J) (J = 1, 2, and 3) to ground states for the glass-ceramics samples. The presence of divalent europium ions in glass and glass-ceramics samples is confirmed from the dominant blue emission corresponding to its 5d-4f transition under an excitation of 300 nm. Increase in the reduction of trivalent europium (Eu(3+)) ions to divalent (Eu(2+)) with the extent of ceramization is explained by charge compensation model based on substitution defect mechanisms. Further, the phenomenon of energy transfer from Eu(2+) to Eu(3+) ion by radiative trapping or re-absorption is evidenced which increases with the degree of ceramization. For the first time, the reduction of Eu(3+) to Eu(2+) under normal air atmospheric condition has been observed in a BaF(2) containing oxyfluoride glass-ceramics system.

  18. Spectroscopic properties and mechanism of Tm3+/Er3+/Yb3+co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals

    Science.gov (United States)

    Hu, Yue-Bo; Qiu, Jian-Bei; Zhou, Da-Cheng; Song, Zhi-Guo; Yang, Zheng-Wen; Wang, Rong-Fei; Jiao, Qing; Zhou, Da-Li

    2014-02-01

    Transparent Tm3+/Er3+/Yb3+ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals are prepared. Under excitation of a 980-nm laser diode (LD), compared with the glass before heat treatment, the Tm3+/Er3+/Yb3+co-doped oxyfluorogermanate glass ceramics can emit intense blue, green and red up-conversion luminescence and Stark-split peaks; X-ray diffraction (XRD) and transmission electron microscope (TEM) results show that BaF2 nanocrystals with an average diameter of 20 nm are precipitated from the glass matrix. Stark splitting of the up-conversion luminescence peaks in the glass ceramics indicates that Tm3+, Er3+ and (or) Yb3+ ions are incorporated into the BaF2 nanocrystals. The up-conversion luminescence intensities of Tm3+, Er3+ and the splitting degree of luminescence peaks in the glass ceramics increase significantly with the increase of heat treat temperature and heat treat time extension. In addition, the possible energy transfer process between rare earth ions and the up-conversion luminescence mechanism are also proposed.

  19. Biota-sediment accumulation factor (BSAF), bioaccumulation factor (BAF), and contaminant levels in prey fish to indicate the extent of PAHs and OCPs contamination in eggs of waterbirds.

    Science.gov (United States)

    Kwok, C K; Liang, Y; Leung, S Y; Wang, H; Dong, Y H; Young, L; Giesy, J P; Wong, M H

    2013-12-01

    Samples of pond sediment, fish, and shrimp were collected from the Ramsar site at Mai Po marshes, Hong Kong (south China), and samples of pond sediment, fish, and shrimp, as well as eggs of water birds (Chinese Pond Herons (Ardeola bacchus) and Little Egrets (Egretta garzetta)), were collected from two smaller wetland sites at Jiangsu Province (mid-China), between 2004 and 2007. Accumulation levels of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in the biota were used to calculate biota-sediment accumulation factor (BSAF) and bioaccumulation factor (BAF). For fish and shrimp, BSAFs of OCPs (3.8-56) were greater than those of PAHs (0.12-6.3). BSAFs and BAFs of 11-79 and 4-34, respectively, were registered for OCPs in eggs of the birds and were greater than those for PAHs (0.11-1.5 and 0.02-1.3, respectively). Assuming that fish were the main prey of the birds, greater bioaccumulation of OCPs was detected for both bird species (BAFs =4.5-34), while accumulation of PAHs was only detected in Little Egret (BAF=1.3). A significant linear relationship (p<0.01) was observed between concentrations of OCPs in bird eggs and in the prey fish. The present study provides a new possibility of using OCP levels detected in prey fish to predict the extent of OCPs contamination in eggs of waterbirds including the endangered species, as a noninvasive method.

  20. Molecular-beam optical Stark and Zeeman study of the A {sup 2}{Pi}--X {sup 2}{Sigma}{sup +} (0,0) band system of BaF

    Energy Technology Data Exchange (ETDEWEB)

    Steimle, Timothy C.; Frey, Sarah; Le, Anh; DeMille, David; Rahmlow, David A.; Linton, Colan [Department of Chemistry and Biochemistry, Arizona State University, Tempe, Arizona 85287-1604 (United States); Department of Physics, Yale University, P.O. Box 208120, New Haven, Connecticut 06520 (United States); Centre for Laser Atomic and Molecular Sciences, Physics Department, University of New Brunswick, P.O. Box 4400, Fredericton, New Brunswick, E3B 5A3 (Canada)

    2011-07-15

    The A {sup 2}{Pi}-X {sup 2}{Sigma}{sup +} (0,0) band system of barium monofluoride (BaF) has been recorded using high-resolution laser-induced fluorescence spectroscopy both field-free and in the presence of static magnetic and electric fields. The field-free spectra for the {sup 135}BaF, {sup 137}BaF, and {sup 138}BaF isotopologues were modeled to generate an improved set of spectroscopic constants for the A {sup 2}{Pi}({upsilon} = 0) and X {sup 2}{Sigma}{sup +}({upsilon} = 0) states. The observed optical Stark shifts for the {sup 138}BaF isotopologue were analyzed to produce the permanent electric dipole moments of 1.50(2) and 1.31(2) D for the A {sup 2}{Pi}{sub 1/2}({upsilon} = 0) and A {sup 2}{Pi}{sub 3/2} ({upsilon} = 0) states, respectively. The observed optical Zeeman shifts for the {sup 138}BaF isotopologue were analyzed to produce a set of magnetic g factors for the A {sup 2}{Pi}({upsilon} = 0) and X {sup 2}{Sigma}{sup +}({upsilon} = 0) states.

  1. CRYSTAL FILTER TEST SET

    Science.gov (United States)

    CRYSTAL FILTERS, *HIGH FREQUENCY, *RADIOFREQUENCY FILTERS, AMPLIFIERS, ELECTRIC POTENTIAL, FREQUENCY, IMPEDANCE MATCHING , INSTRUMENTATION, RADIOFREQUENCY, RADIOFREQUENCY AMPLIFIERS, TEST EQUIPMENT, TEST METHODS

  2. Combination of ozonation, activated carbon, and biological aerated filter for advanced treatment of dyeing wastewater for reuse.

    Science.gov (United States)

    Zou, Xiao-Ling

    2015-06-01

    Laboratorial scale experiments were performed to investigate and evaluate the performance and removal characteristics of organics, color, and genotoxicity by an integrated process including ozonation, activated carbon (AC), and biological aerated filter (BAF) for recycling biotreated dyeing wastewater (BTDW) collected from a cotton textile factory. Influent chemical oxygen demand (COD) in the range of 156 - 252 mg/L, 5-day biochemical oxygen demand (BOD5) of 13.5 - 21.7 mg/L, and color of 58 - 76° were observed during the 20-day continuous operation. Outflows with average COD of 43 mg/L, BOD5 of 6.6 mg/L, and color of 5.6° were obtained after being decontaminated by the hybrid system with ozone dosage of 0.25 mg O3applied/mg COD0, 40 min ozonation contact time, 30 min hydraulic retention time (HRT) for AC treatment, and 2.5 h HRT for BAF treatment. More than 82 % of the genotoxicity of BTDW was eliminated in the ozonation unit. The genotoxicity of the BAF effluent was less than 1.33 μg 4-nitroquinoline-N-oxide/L. Ozonation could change the organics molecular structures, destroy chromophores, increase the biodegradability, and obviously reduce the genotoxicity of BTDW. Results showed that the combined process could guarantee water reuse with high quality.

  3. Digital filters

    CERN Document Server

    Hamming, Richard W

    1997-01-01

    Digital signals occur in an increasing number of applications: in telephone communications; in radio, television, and stereo sound systems; and in spacecraft transmissions, to name just a few. This introductory text examines digital filtering, the processes of smoothing, predicting, differentiating, integrating, and separating signals, as well as the removal of noise from a signal. The processes bear particular relevance to computer applications, one of the focuses of this book.Readers will find Hamming's analysis accessible and engaging, in recognition of the fact that many people with the s

  4. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  5. D and DR Reactors

    Data.gov (United States)

    Federal Laboratory Consortium — The world's second full-scale nuclear reactor was the D Reactor at Hanford which was built in the early 1940's and went operational in December of 1944.D Reactor ran...

  6. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  7. Evaluation of Core Loss in Magnetic Materials Employed in Utility Grid AC Filters

    DEFF Research Database (Denmark)

    Beres, Remus Narcis; Wang, Xiongfei; Blaabjerg, Frede;

    2016-01-01

    Inductive components play an important role in filtering the switching harmonics related to the pulse width modulation in voltage source converters. Particularly, the filter reactor on the converter side of the filter is subjected to rectangular excitation which may lead to significant losses in ...

  8. Simultaneous measurement of (n, γ) and (n, fission) cross sections with the DANCE 4π BaF 2 array

    Science.gov (United States)

    Bredeweg, T. A.; Fowler, M. M.; Becker, J. A.; Bond, E. M.; Chadwick, M. B.; Clement, R. R. C.; Esch, E.-I.; Ethvignot, T.; Granier, T.; Jandel, M.; Macri, R. A.; O'Donnell, J. M.; Reifarth, R.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wilhelmy, J. B.; Wouters, J. M.; Wu, C. Y.

    2007-08-01

    We have recently begun a program of high precision measurements of the key production and destruction reactions of important radiochemical diagnostic isotopes, including several isotopes of uranium, plutonium and americium. The detector for advanced neutron capture experiments (DANCE), a 4π BaF2 array located at the Los Alamos Neutron Science Center, will be used to measure the neutron capture cross sections for most of the isotopes of interest. However, neutron capture measurements on many of the actinides are complicated by the presence of prompt γ-rays arising from low energy neutron-induced fission, which competes with neutron capture to varying degrees. Previous measurements of 235U using the DANCE array have shown that we can partially resolve capture from fission events based on total γ-ray calorimetry (i.e. total γ-ray energy versus γ-ray multiplicity). The addition of a dedicated fission-tagging detector to the DANCE array has greatly improved our ability to separate these two competing processes. In addition to higher quality neutron capture data, the addition of a fission-tagging detector offers a means to determine the capture-to-fission ratio (σγ/σf) in a single measurement, which should reduce the effect of systematic uncertainties. We are currently using a dual parallel-plate avalanche counter (PPAC) with the target material electro-deposited directly on the center cathode foil. This design provides a high efficiency for detecting fission fragments and allows loading of pre-assembled target/detector assemblies into the neutron beam line at DANCE. Results from tests of the fission-tag detector, as well as preliminary results from measurements on 235U and 252Cf that utilized the fission-tag detector will be presented.

  9. Nuclear reactor neutron shielding

    Energy Technology Data Exchange (ETDEWEB)

    Speaker, Daniel P; Neeley, Gary W; Inman, James B

    2017-09-12

    A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactor cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.

  10. Reactor and method of operation

    Science.gov (United States)

    Wheeler, John A.

    1976-08-10

    A nuclear reactor having a flattened reactor activity curve across the reactor includes fuel extending over a lesser portion of the fuel channels in the central portion of the reactor than in the remainder of the reactor.

  11. Convergent Filter Bases

    OpenAIRE

    Coghetto Roland

    2015-01-01

    We are inspired by the work of Henri Cartan [16], Bourbaki [10] (TG. I Filtres) and Claude Wagschal [34]. We define the base of filter, image filter, convergent filter bases, limit filter and the filter base of tails (fr: filtre des sections).

  12. Convergent Filter Bases

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2015-09-01

    Full Text Available We are inspired by the work of Henri Cartan [16], Bourbaki [10] (TG. I Filtres and Claude Wagschal [34]. We define the base of filter, image filter, convergent filter bases, limit filter and the filter base of tails (fr: filtre des sections.

  13. ADM1 applications for a hybrid up-flow anaerobic sludge-filter bed reactor performance and for a batch thermophilic anaerobic digestion of thermally pretreated waste activated sludge

    Directory of Open Access Journals (Sweden)

    lván Ramirez

    2012-01-01

    Full Text Available Los procesos de la digestión anaerobia comprenden una red completa de reacciones bioquimicas y fisicoquímicas, secuenciales y paralelas. Los digestores anaerobios a menudo exhiben importantes problemas de estabilidad que sólo pueden ser evitados a través de apropiadas estrategias de control. Tales estrategias requieren, en general, para su implementación, del desarrollo de modelos matemáticos cuya finalidad es el de permitirnos mejor comprensión y optimización de los procesos de la digestión anaerobia, describiendo estas reacciones de una manera estructurada. Este trabajo revisa el modelo ADMI de la IWAy discute dos aplicaciones del modelo: la digestión anaerobia de las aguas residuales vinazas de las destilerias de vino corno sustrato en un reactor hibrido (UASFB y la digestión anaerobia termófila en batch de lodos activados con pre-tratamiento térmico. Las predicciones del modelo, usando los parámetros establecidos en este estudio, concuerdan bien con los resultados de las mediciones en las diferentes condiciones ensayadas. Los modelos resultantes explicaron la evolución dinámica de las principales variables, tanto en la fase liquida corno la fase gaseosa.

  14. Performances of lateral flow biological aerated filter in treating domestic wastewater

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-jing; LONG Teng-rui; CAO Yan-xiao

    2006-01-01

    A new biological aerated filter--lateral flow biological aerated filter(LBAF) is developed.The effects of air/water ratio,hydraulic loading and the length of LBAF on pollutants removal efficiency are tested.The results show that under optimal technological conditions when hydraulic loading is 0.43 m3 m(2 h(1 and air/water ratio is 10:1,the average removal efficiencies of COD,SS,NH3-N,and TN reach 88.01%,95.18%,78.97% and 52.58%,respectively.An LBAF has a large pollutants handling capacity; is less liable to be blocked,and has a longer operation cycle in comparison with a traditional BAF.

  15. NOVEL MICROWAVE FILTER DESIGN TECHNIQUES.

    Science.gov (United States)

    ELECTROMAGNETIC WAVE FILTERS, MICROWAVE FREQUENCY, PHASE SHIFT CIRCUITS, BANDPASS FILTERS, TUNED CIRCUITS, NETWORKS, IMPEDANCE MATCHING , LOW PASS FILTERS, MULTIPLEXING, MICROWAVE EQUIPMENT, WAVEGUIDE FILTERS, WAVEGUIDE COUPLERS.

  16. Construction of the WSU Epithermal Neutron Filter

    Energy Technology Data Exchange (ETDEWEB)

    Venhuizen, James Robert; Nigg, David Waler; Tripard, G.

    2002-09-01

    Moderating material has been installed in the original thermal-neutron filter region of the Washington State University (WSU) TRIGA™ type reactor to produce an epithermal-neutron beam. Attention has been focused upon the development of a convenient, local, epithermal-neutron beam facility at WSU for collaborative Idaho National Engineering and Environmental Laboratory (INEEL)/WSU boron neutron capture therapy (BNCT) preclinical research and boronated pharmaceutical screening in cell and animal models. The design of the new facility was performed in a collaborative effort1,2 of WSU and INEEL scientists. This paper summarizes the physical assembly of this filter.

  17. Studies on upflow anaerobic filter

    Science.gov (United States)

    Varandani, Nanik Sobhraj

    The thesis presents a critical review of the available literature on the various studies carried out on various aspects of Upflow Anaerobic Filter (UAF) throughout the world. Young and McCarty (1969) did the pioneering work in developing UAF in 1969, since then several studies have been carried out by different researchers using different substrates under different operating conditions and variety of supporting media. However, the most significant modification of the original reactor developed by Young and McCarty (1968), has been the development and use of high porosity media. The use of high porosity media, in fact, has changed the character of the reactor, from basically a fixed film reactor to a fixed film reactor in which the contribution by the suspended bio-solids, entrapped in the numerous media pores, in the substrate removal is quite significant that is to say that the reactor no longer remains a biological reactor which can be modeled and designed on the basis of biofilm kinetics only. The thesis presents an attempt to validate the developed mathematical model(s) by using the laboratory scale reactor performance data and the calculated values of reaction kinetic and bio-kinetic constants. To simplify the verification process, computer programmes have been prepared using the "EXCELL" software and C language. The results of the "EXCELL" computer program runs are tabulated at table no. 7.1 to 7.5. The verification of various mathematical models indicate that the model III B, i.e. Non ideal plug flow model assumed to consist of Complete Mix Reactors in series based on reaction kinetics, gives results with least deviation from the real situation. An interesting observation being that the model offers least deviation or nearly satisfies the real situation for a particular COD removal efficiency, for a particular OLR, eg. the least deviations are obtained at COD removal efficiency of 89% for OLR 2, 81.5% for OLR 4, 78.5% for OLR 6 . However, the use of the

  18. Role of magnetism in superconductivity of BaF e2A s2 : Study of 5 d Au-doped crystals

    Science.gov (United States)

    Li, Li; Cao, Huibo; McGuire, Michael A.; Kim, Jungsoo S.; Stewart, Greg R.; Sefat, Athena S.

    2015-09-01

    We investigate properties of BaF e2A s2 (122) single crystals upon gold doping, which is the transition metal with the highest atomic weight. The Au substitution into the FeAs-planes of 122 crystal structure (Au-122) is only possible up to a small amount of ˜3 % . We find that 5 d is more effective in reducing magnetism in 122 than its counter 3 d Cu, and this relates to superconductivity. We provide evidence of short-range magnetic fluctuations and local lattice inhomogeneities that may prevent strong percolative superconductivity in Ba (Fe1-xA ux) 2A s2 .

  19. Alpha-gamma pulse shape discrimination in CsI:Tl, CsI:Na and BaF sub 2 scintillators

    CERN Document Server

    Dinca, L E; Haas, J; Bom, V R; Eijk, C W E

    2002-01-01

    Some scintillating materials offer the possibility of measuring well separated alpha and gamma scintillation response using a single crystal. Eventually aiming at thermal neutron detection using sup 6 Li or sup 1 sup 0 B admixture, pulse shape discrimination measurements were made on three scintillators: CsI:Tl, CsI:Na and pure BaF sub 2 crystals. A very good alpha/gamma discrimination was obtained using sup 2 sup 2 Na, sup 2 sup 4 sup 1 Am (gamma) and sup 2 sup 4 sup 4 Cm (alpha) radioactive sources.

  20. Miniaturized dielectric waveguide filters

    Science.gov (United States)

    Sandhu, Muhammad Y.; Hunter, Ian C.

    2016-10-01

    Design techniques for a new class of integrated monolithic high-permittivity ceramic waveguide filters are presented. These filters enable a size reduction of 50% compared to air-filled transverse electromagnetic filters with the same unloaded Q-factor. Designs for Chebyshev and asymmetric generalised Chebyshev filter and a diplexer are presented with experimental results for an 1800 MHz Chebyshev filter and a 1700 MHz generalised Chebyshev filter showing excellent agreement with theory.

  1. 臭氧 BAF一体化装置处理含氨氮有机污染废水%Integrated Unit of Ozone-BAF System for Treatment of Organic Polluted Wastewater with Ammonia Nitrogen

    Institute of Scientific and Technical Information of China (English)

    刘剑玉; 林庆坤; 汪晓军

    2015-01-01

    Integrated unit of ozone and biological aerated filter (BAF)was used to treat organic polluted wastewater containing ammonia nitrogen. The results indicate that removal rate of ammonia nitrogen decreases with the increase of ammonia nitrogen concentration in influent,the ideal ammonia nitrogen loading is 0. 17 ~ 0. 25 kg / m3 ·d,and then removal rate of ammonia nitrogen can be above 60% stably. Ammonia nitrogen in influent has some negative influence on COD removal. When concentration of ammonia nitrogen is more than 60 mg / L,effect of COD removal turns worse obviously. Lipid-phosphorous method was applied in biomass measurement of the integrated ozone-BAF unit to treat biomass distribution in the system. It is shown that in the area near inlet,when sampling height isn’t more than 1. 2 m,biomass is extremely rare as a result of the high ozone disinfection. Biomass reaches maximum when the vertical distance is 1. 5 m,and then biomass declines with the increase of sampling height.%该文采用臭氧曝气生物滤池(BAF)一体化装置处理含氨氮有机污染废水。随着氨氮浓度增大,系统对氨氮的去除率呈现下降趋势,较理想的进水氨氮负荷范围为0.17~0.25 kg / m3·d,此时的氨氮去除率可稳定在60%以上。进水中含有的氨氮对COD去除效果的影响较大,当氨氮浓度超过60 mg / L时,系统对 COD的去除效果明显变差。用脂磷法测定一体化装置内的微生物量,结果显示在距离进水口较近的区域(取样高度≤1.2 m)由于高浓度臭氧的杀菌作用,微生物量极少;在距离进水口垂直距离1.5 m处生物量达到最大值,形成了臭氧氧化和生化的协同作用区域;在此之后,随着取样高度的继续增加,系统内生物量出现下降的现象。

  2. Qualifications of Candle Filters for Combined Cycle Combustion Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tomasz Wiltowski

    2008-08-31

    The direct firing of coal produces particulate matter that has to be removed for environmental and process reasons. In order to increase the current advanced coal combustion processes, under the U.S. Department of Energy's auspices, Siemens Westinghouse Power Corporation (SWPC) has developed ceramic candle filters that can operate at high temperatures. The Coal Research Center of Southern Illinois University (SIUC), in collaboration with SWPC, developed a program for long-term filter testing at the SIUC Steam Plant followed by experiments using a single-filter reactor unit. The objectives of this program funded by the U.S. Department of Energy were to identify and demonstrate the stability of porous candle filter elements for use in high temperature atmospheric fluidized-bed combustion (AFBC) process applications. These verifications were accomplished through extended time slipstream testing of a candle filter array under AFBC conditions using SIUC's existing AFBC boiler. Temperature, mass flow rate, and differential pressure across the filter array were monitored for a duration of 45 days. After test exposure at SIUC, the filter elements were characterized using Scanning Electron Microscopy and BET surface area analyses. In addition, a single-filter reactor was built and utilized to study long term filter operation, the permeability exhibited by a filter element before and after the slipstream test, and the thermal shock resilience of a used filter by observing differential pressure changes upon rapid heating and cooling of the filter. The data acquired during the slipstream test and the post-test evaluations demonstrated the suitability of filter elements in advanced power generation applications.

  3. Filter quality of pleated filter cartridges.

    Science.gov (United States)

    Chen, Chun-Wan; Huang, Sheng-Hsiu; Chiang, Che-Ming; Hsiao, Ta-Chih; Chen, Chih-Chieh

    2008-04-01

    The performance of dust cartridge filters commonly used in dust masks and in room ventilation depends both on the collection efficiency of the filter material and the pressure drop across the filter. Currently, the optimization of filter design is based only on minimizing the pressure drop at a set velocity chosen by the manufacturer. The collection efficiency, an equally important factor, is rarely considered in the optimization process. In this work, a filter quality factor, which combines the collection efficiency and the pressure drop, is used as the optimization criterion for filter evaluation. Most respirator manufacturers pleat the filter to various extents to increase the filtration area in the limit space within the dust cartridge. Six sizes of filter holders were fabricated to hold just one pleat of filter, simulating six different pleat counts, ranging from 0.5 to 3.33 pleats cm(-1). The possible electrostatic charges on the filter were removed by dipping in isopropyl alcohol, and the air velocity is fixed at 100 cm s(-1). Liquid dicotylphthalate particles generated by a constant output atomizer were used as challenge aerosols to minimize particle loading effects. A scanning mobility particle sizer was used to measure the challenge aerosol number concentrations and size distributions upstream and downstream of the pleated filter. The pressure drop across the filter was monitored by using a calibrated pressure transducer. The results showed that the performance of pleated filters depend not only on the size of the particle but also on the pleat count of the pleated filter. Based on filter quality factor, the optimal pleat count (OPC) is always higher than that based on pressure drop by about 0.3-0.5 pleats cm(-1). For example, the OPC is 2.15 pleats cm(-1) from the standpoint of pressure drop, but for the highest filter quality factor, the pleated filter needed to have a pleat count of 2.65 pleats cm(-1) at particle diameter of 122 nm. From the aspect of

  4. Spectroscopy of laser properties of Nd(3+)-doped CaF2, SrF2, and BaF2

    Science.gov (United States)

    Payne, Stephen A.; Caird, John A.; Chase, L. L.; Smith, L. K.; Nielsen, N. D.; Krupke, William F.

    1990-03-01

    The optical properties of Nd(3+) in CaF2, SrF2, and BaF2 were investigated in order to determine if these materials are useful as laser-pumped amplifier media. The CaF2:Nd crystal was found to not be useful because the impurities tend to cluster at very low concentration, leading to the formation of nonluminescent centers. On the other hand, the Nd(3+) centers in BaF2 exhibit unacceptably low transition strengths. SrF2:Nd appears to have adequate absorption strength, and, in addition, to have a remarkably long emission lifetime of 1280 microns. A maximum doping of 0.20 atomic percent Nd(3+) can be tolerated in SrF2 without the occurrence of detrimental clustering. The peak emission cross section of SrF2:Nd is 1.7 x 10(exp -20) sq cm at 1036.5 nm. Direct measurement of the gain spectrum of SrF2:Nd(3+) reveals the presence of the F-4(sub 3/2) yields G-2(sub 9/2) excited state absorption lines, although the impact on the emission cross section is minor.

  5. Operação de filtros biológicos percoladores pós-reatores UASB sem a etapa de decantação secundária Operation of trickling filters post-UASB reactors without the secondary sedimentation stage

    Directory of Open Access Journals (Sweden)

    Paulo Gustavo Sertório de Almeida

    2011-09-01

    Full Text Available A pesquisa teve por objetivo avaliar filtros biológicos percoladores (FBP pós-reatores UASB operando sem a etapa de decantação secundária, em termos da remoção da demanda bioquímica e química de oxigênio (DBO e DQO e sólidos suspensos totais (SST. O aparato experimental consistia em um reator UASB que alimentava quatro FBP em paralelo, preenchidos com diferentes materiais suporte. O reator UASB operou em regime hidráulico permanente, e três condições operacionais foram impostas aos FBP durante o período experimental. Em geral, os sistemas UASB/FBP foram capazes de promover o atendimento aos padrões de lançamento. Em condições de baixas cargas orgânicas volumétricas (COV, o uso de materiais de enchimento de maior área superficial específica não proporcionou ganhos expressivos em termos de desempenho. Contudo, o uso de meio suporte baseado em espumas de poliuretano propiciou melhoria significativa na qualidade do efluente final. O uso de sistemas UASB/FBP sem decantadores secundários parece ser uma promissora alternativa para a simplificação operacional da tecnologia, e uma importante estratégia para o tratamento de efluentes domésticos em países em desenvolvimento. No entanto, o sucesso do emprego desta tecnologia fica condicionado ao correto gerenciamento do lodo anaeróbio do reator UASB, a fim de que sejam evitadas sobrecargas nos FBP.The research aimed at evaluating the operation of trickling filters (TF post-UASB reactors without the secondary sedimentation stage, in terms of biochemical and chemical oxygen demand (BOD and COD and total suspended solids (TSS removal. The experimental apparatus consisted of one UASB reactor followed by four TF in parallel, each one filled with a different packing media. The UASB reactor was operated at a permanent hydraulic regime, while three operational conditions were imposed to the TF during the experimental period. In general, the UASB/TF systems were able to comply with

  6. Composing morphological filters

    NARCIS (Netherlands)

    H.J.A.M. Heijmans (Henk)

    1995-01-01

    textabstractA morphological filter is an operator on a complete lattice which is increasing and idempotent. Two well-known classes of morphological filters are openings and closings. Furthermore, an interesting class of filters, the alternating sequential filters, is obtained if one composes openin

  7. Composing morphological filters

    NARCIS (Netherlands)

    Heijmans, H.J.A.M.

    1995-01-01

    A morphological filter is an operator on a complete lattice which is increasing and idempotent. Two well-known classes of morphological filters are openings and closings. Furthermore, an interesting class of filters, the alternating sequential filters, is obtained if one composes openings and closi

  8. Relationship of BAF Complex and Transcription Factor NF1/CTF with RNA Polymerase Ⅱ%BAF复合物和转录因子NF1/CTF与RNA聚合酶Ⅱ的联系

    Institute of Scientific and Technical Information of China (English)

    姜革强; 邓国忠; 王霞

    2006-01-01

    通过ELISA实验观察小鼠脾T淋巴细胞和Jurkat细胞经ConA处理后,BAF(hSWI/SNF)复合物、转录因子NF1/CTF、RNA聚合酶Ⅱ蛋白表达量的变化情况.实验证实,细胞活化后,复合物BAF(hSWI/SNF)、转录因子NF1/CTF、RNA聚合酶Ⅱ的表达发生了变化,表明它们和细胞的转录活动有关.

  9. Reactor Physics Programme

    Energy Technology Data Exchange (ETDEWEB)

    De Raedt, C

    2000-07-01

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies.

  10. Passive Power Filters

    CERN Document Server

    Künzi, R

    2015-01-01

    Power converters require passive low-pass filters which are capable of reducing voltage ripples effectively. In contrast to signal filters, the components of power filters must carry large currents or withstand large voltages, respectively. In this paper, three different suitable filter struc tures for d.c./d.c. power converters with inductive load are introduced. The formulas needed to calculate the filter components are derived step by step and practical examples are given. The behaviour of the three discussed filters is compared by means of the examples. P ractical aspects for the realization of power filters are also discussed.

  11. 曝气生物滤池处理腈纶废水的启动性能研究%Research on the Start-up Performance of the Biological Aerated Filter for Treating Acrylic Water

    Institute of Scientific and Technical Information of China (English)

    卞吉良; 张洪林; 李长波; 马会强

    2011-01-01

    A bench scale experimental BAF was established, with which acrylic waste water was treated. The start-up law of BAF in treating the waste water containing acrylic was studied. Ceramsite was used as the filter in BAF. Under the conditions of the flow of 2SL/h, aeration rate of 40L/h, the removal rate of COD and ammonia was tested every day. The results demonstrated that the removal rate of COD was about 65% after 15 days; and the removal rate of ammonia was about 60% after 18 days. The result of the optical bio-microscope observation showed that the ecosystem with many kinds of different microbes and distinct biological phase distribution was formed in the BAF. Therefore, the course of biofilm formation and the degree of biological nitrification could be estimated by the change of removal rate of ammonia and COD during the course of the natural start-up of the BAF.%以曝气生物滤池(Biological Aerated Filter,BAF)净化腈纶废水为研究对象,研究了BAF处理腈纶废水的启动规律.试验以陶粒为滤料,在流量为25Lh,曝气量为40L/h的试验条件下,每天测试COD和氨氮的去除率变化情况.BAF对COD,氨氮有一定的去除效果.启动15d后,COD去除率达到65%;18d后,氨氮去除率达到60%以上.镜检表明,填料表面生物膜中均存在着多种微生物和明显的生物相分布.BAF挂膜过程中可以通过氨氮和COD去除率变化,来判断填料挂膜的进程和生物硝化作用进行的程度.

  12. Hydrodynamic behaviour of the lateral flow biological aerated filter

    Institute of Scientific and Technical Information of China (English)

    HE Qiang; WANG Yin; FANG Jun-hua; ZHANG Hong-jing; XU Jing

    2006-01-01

    Pulsed signal experiment was carried out to determine the hydrodynamic behaviours of lateral flow biological aerated filter(LBAF). With the analysis of experimental results, LBAF is viewed as an approximate plug flow reactor, and hydraulic retention time distribution function was derived based on LBAF. The results show that flow rate and aeration strength are two critical factors which influence flow patterns in LBAF reactor. The hydrodynamic behaviour analysis of LBAF is the theoretical basis of future research on improving capacity factor and developing kinetic model for the reactor.

  13. Attrition reactor system

    Science.gov (United States)

    Scott, Charles D.; Davison, Brian H.

    1993-01-01

    A reactor vessel for reacting a solid particulate with a liquid reactant has a centrifugal pump in circulatory flow communication with the reactor vessel for providing particulate attrition, resulting in additional fresh surface where the reaction can occur.

  14. LMFBR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kawakami, Hiroto

    1995-02-07

    A reactor container of the present invention has a structure that the reactor container is entirely at the same temperature as that at the inlet of the reactor and, a hot pool is incorporated therein, and the reactor container has is entirely at the same temperature and has substantially uniform temperature follow-up property transiently. Namely, if the temperature at the inlet of the reactor core changes, the temperature of the entire reactor container changes following this change, but no great temperature gradient is caused in the axial direction and no great heat stresses due to axial temperature distribution is caused. Occurrence of thermal stresses caused by the axial temperature distribution can be suppressed to improve the reliability of the reactor container. In addition, since the laying of the reactor inlet pipelines over the inside of the reactor is eliminated, the reactor container is made compact and the heat shielding structures above the reactor and a protection structure of container walls are simplified. Further, secondary coolants are filled to the outside of the reactor container to simplify the shieldings. The combined effects described above can improve economical property and reliability. (N.H.).

  15. Cumulants and waitingtime distribution of the photon emission from driven BaF molecule%外场作用下BaF分子发射光子累积量及等待时间分布的研究∗

    Institute of Scientific and Technical Information of China (English)

    古丽姗; 彭勇刚

    2016-01-01

    In this paper, we consider a single BaF molecule driven by an external field. When the symmetry is broken, the states of the BaF molecule demonstrate the permanent dipole moments. An external laser field to excite BaF molecule transition from its ground state to its excited state, and a radio frequency field couple with the permanent dipole moment of the BaF. The first order and second order cumulants of the emission photons and the waiting time distribution are studied via the recently developed generating function approach, which is very convenient to study the counting statistics and the corresponding probability distributions. The results demonstrate that the radio frequency field could help the BaF molecule to absorb photons from the driving field. The second and third order waiting time distributions oscillate with the evolution time, which reflects the states oscillating with the external radio frequency field.

  16. Application of integrated ozone biological aerated filters and membrane filtration in water reuse of textile effluents.

    Science.gov (United States)

    He, Yaozhong; Wang, Xiaojun; Xu, Jinling; Yan, Jinli; Ge, Qilong; Gu, Xiaoyang; Jian, Lei

    2013-04-01

    A combined process including integrated ozone-BAFs (ozone biological aerated filters) and membrane filtration was first applied for recycling textile effluents in a cotton textile mill with capacity of 5000 m(3)/d. Influent COD (chemical oxygen demand) in the range of 82-120 mg/L, BOD5 (5-day biochemical oxygen demand) of 12.6-23.1 mg/L, suspended solids (SSs) of 38-52 mg/L and color of 32-64° were observed during operation. Outflows with COD≤45 mg/L, BOD5≤7.6 mg/L, SS≤15 mg/L, color≤8° were obtained after being decontaminated by ozone-BAF with ozone dosage of 20-25 mg/L. Besides, the average removal rates of PVA (polyvinyl alcohol) and UV254 were 100% and 73.4% respectively. Permeate water produced by RO (reverse osmosis) could be reused in dyeing and finishing processes, while the RO concentrates could be discharged directly under local regulations with COD≤100 mg/L, BOD5≤21 mg/L, SS≤52 mg/L, color≤32°. Results showed that the combined process could guarantee water reuse with high quality, and solve the problem of RO concentrate disposal.

  17. 高次谐波滤除方法在ADS次临界堆瞬发中子衰减常数计算中的应用%High Order Harmonic Wave Filtering Method Used In Prompt Neutron Attenuation Constant Calculation Of ADS Sub-Critical Reactor

    Institute of Scientific and Technical Information of China (English)

    谢金森; 于涛; 左国平; 何丽华; 李小华

    2013-01-01

    MUSE (Multiplication with an external source) seres experiments carried out by the EU show that the Pulsed Neutron Source (PNS) method is appropriate for keff measurement in deep sub-critical conditions.In PNS method,the accuracy of prompt neutron attenuation constant α plays a key role for accuratelykeffr measurement.In this paper,the analysis of α constant measurement on fast-thermal coupled subcritical facility Venus-1# is performed.By using high order harmonic wave filtering technique,the time interval for α fitting is obtained and the fitted α values are spatially independent with locations of detectors.Furthermore,the comparison of prompt multiplication factorskp,derived from fitted α and calculated by MCNP (Monte Carlo N Particles) is made,which shows a good conformation.Results in this research indicate that,the high order harmonic wave filtering method can effectively avoid the problem that the measured α values depend on the locations of detectors,and the α values obtained from which can be used for keff off-line monitoring in ADS sub-critical reactors.%欧盟开展的外源倍增(MUSE)系列实验表明:脉冲中子源(PNS)方法是一种适用于深次临界堆中子增殖系数(keff)测量的方法,在PNS方法中,瞬发中子衰减常数α的准确与否是精确测量keff的关键.本文针对“快热”耦合次临界装置——“启明星1#”上的α测量进行分析,采用高次谐波滤除方法,得到拟合α值的时间区间,在该时间区间内得到的α与探测器位置无关.同时将由α计算出的次临界系统的瞬发中子倍增系数kp与蒙特卡罗程序(MCNP)计算结果进行对比分析,两者符合较好.研究表明:高次谐波滤除方法可有效避免α值测量依赖于探测器位置的问题,由该方法得到的α值可用于加速器驱动洁净核能系统(ADS)次临界反应堆keff离线监督.

  18. Method of securing filter elements

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Erik P.; Haslam, Jeffery L.; Mitchell, Mark A.

    2016-10-04

    A filter securing system including a filter unit body housing; at least one tubular filter element positioned in the filter unit body housing, the tubular filter element having a closed top and an open bottom; a dimple in either the filter unit body housing or the top of the tubular filter element; and a socket in either the filter unit body housing or the top of the tubular filter element that receives the dimple in either the filter unit body housing or the top of the tubular filter element to secure the tubular filter element to the filter unit body housing.

  19. 内循环BAF技术处理碱渣工程应用%Engineering application of internal circulating BAF technology to the pretreatment of alkaline residue

    Institute of Scientific and Technical Information of China (English)

    李明达; 王建

    2016-01-01

    中石油兰州石化公司碱渣装置采用内循环BAF生物处理技术预处理碱渣。整套系统能够满足兰州石化厂现有碱渣处理量的需求,解决了该厂碱渣处理难题。对内循环BAF反冲洗沉淀池进行及时清淤,能够改善反冲洗给水水质、提升反冲洗系统的效率,进而有助于提高内循环BAF的出水效果。在出水水质满足设计要求的前提下,当前9组(共12组)内循环BAF池运转对碱渣的处理量可达到8.3 m3/h,核算运行成本为38元/t。%Internal circulating BAF biological oxidation technology has been used in the alkaline residue equipment in PetroChina Lanzhou Petrochemical Co. for the pretreatment of alkaline residue. The whole system is capable for meeting the requirement for the present alkaline residue treatment capacity in Lanzhou Petrochemical Plant. Thus , the problems in alkaline residue treatment in that plant has now been solved. The discharge of sludge from the flush-ing sedimentation tank in time is very helpful for improving the quality of backwashing water supply ,upgrading the efficiency of the backwashing system,and,furthermore,upgrading the effluent effect of internal circulating BAF. On the premise that the effluent water quality meets the designed requirements ,the alkaline residue treatment capacity by the operation of the first 9 groups (12 groups altogether) of internal circulating BAF tank can reach 8.3 m3/h, whose accounting cost is CNY38 per ton.

  20. Light water reactor safety

    CERN Document Server

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  1. Nuclear reactor physics

    CERN Document Server

    Stacey, Weston M

    2010-01-01

    Nuclear reactor physics is the core discipline of nuclear engineering. Nuclear reactors now account for a significant portion of the electrical power generated worldwide, and new power reactors with improved fuel cycles are being developed. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. The second edition of this successful comprehensive textbook and reference on basic and advanced nuclear reactor physics has been completely updated, revised and enlarged to include the latest developme

  2. Spinning fluids reactor

    Science.gov (United States)

    Miller, Jan D; Hupka, Jan; Aranowski, Robert

    2012-11-20

    A spinning fluids reactor, includes a reactor body (24) having a circular cross-section and a fluid contactor screen (26) within the reactor body (24). The fluid contactor screen (26) having a plurality of apertures and a circular cross-section concentric with the reactor body (24) for a length thus forming an inner volume (28) bound by the fluid contactor screen (26) and an outer volume (30) bound by the reactor body (24) and the fluid contactor screen (26). A primary inlet (20) can be operatively connected to the reactor body (24) and can be configured to produce flow-through first spinning flow of a first fluid within the inner volume (28). A secondary inlet (22) can similarly be operatively connected to the reactor body (24) and can be configured to produce a second flow of a second fluid within the outer volume (30) which is optionally spinning.

  3. 10BaF2∶NaF, Na3AlF6/TiO2 composite as a novel visible-light-driven photocatalyst based on upconversion emission

    Institute of Scientific and Technical Information of China (English)

    Liu En-Zhou; Fan Jun; Hu Xiao-Yun; Hou Wen-Qian; Dai Hong-Zhe

    2012-01-01

    A rare-earth free upconversion luminescent material,10BaF2∶NaF,Na3AlF6,is synthesized by a hydrothermal method.The study of fluorescent spectrum indicates that it can convert visible light (550 nm-610 nm) into ultraviolet light (290 nm-350 nm),and two emission peaks at 304 nm and 324 nm are observed under the excitation of 583 nm at room temperature.Subsequently,10BaF2∶NaF,Na3AlF6/TiO2 composite photocatalyst is prepared and its catalyticactivity is evaluated by the photocatalytic reduction of CO2 under visible light irradiation (λ > 515 nm).The resultsshow that 10BaF2∶NaF,Na3AlF6/TiO2 is a more effective photocatalyst for CO2 reduction than pure TiO2,their corresponding methanol yields are 179 and 0 μmol/g-cat under the same conditions.Additionally,the mechanism of photocatalytic reduction of CO2 on 10BaF2∶NaF,Na3A1F6/TiO2 is proposed.

  4. Generalized Hampel Filters

    Science.gov (United States)

    Pearson, Ronald K.; Neuvo, Yrjö; Astola, Jaakko; Gabbouj, Moncef

    2016-12-01

    The standard median filter based on a symmetric moving window has only one tuning parameter: the window width. Despite this limitation, this filter has proven extremely useful and has motivated a number of extensions: weighted median filters, recursive median filters, and various cascade structures. The Hampel filter is a member of the class of decsion filters that replaces the central value in the data window with the median if it lies far enough from the median to be deemed an outlier. This filter depends on both the window width and an additional tuning parameter t, reducing to the median filter when t=0, so it may be regarded as another median filter extension. This paper adopts this view, defining and exploring the class of generalized Hampel filters obtained by applying the median filter extensions listed above: weighted Hampel filters, recursive Hampel filters, and their cascades. An important concept introduced here is that of an implosion sequence, a signal for which generalized Hampel filter performance is independent of the threshold parameter t. These sequences are important because the added flexibility of the generalized Hampel filters offers no practical advantage for implosion sequences. Partial characterization results are presented for these sequences, as are useful relationships between root sequences for generalized Hampel filters and their median-based counterparts. To illustrate the performance of this filter class, two examples are considered: one is simulation-based, providing a basis for quantitative evaluation of signal recovery performance as a function of t, while the other is a sequence of monthly Italian industrial production index values that exhibits glaring outliers.

  5. MST Filterability Tests

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Burket, P. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Duignan, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-12

    The Savannah River Site (SRS) is currently treating radioactive liquid waste with the Actinide Removal Process (ARP) and the Modular Caustic Side Solvent Extraction Unit (MCU). The low filter flux through the ARP has limited the rate at which radioactive liquid waste can be treated. Recent filter flux has averaged approximately 5 gallons per minute (gpm). Salt Batch 6 has had a lower processing rate and required frequent filter cleaning. Savannah River Remediation (SRR) has a desire to understand the causes of the low filter flux and to increase ARP/MCU throughput. In addition, at the time the testing started, SRR was assessing the impact of replacing the 0.1 micron filter with a 0.5 micron filter. This report describes testing of MST filterability to investigate the impact of filter pore size and MST particle size on filter flux and testing of filter enhancers to attempt to increase filter flux. The authors constructed a laboratory-scale crossflow filter apparatus with two crossflow filters operating in parallel. One filter was a 0.1 micron Mott sintered SS filter and the other was a 0.5 micron Mott sintered SS filter. The authors also constructed a dead-end filtration apparatus to conduct screening tests with potential filter aids and body feeds, referred to as filter enhancers. The original baseline for ARP was 5.6 M sodium salt solution with a free hydroxide concentration of approximately 1.7 M.3 ARP has been operating with a sodium concentration of approximately 6.4 M and a free hydroxide concentration of approximately 2.5 M. SRNL conducted tests varying the concentration of sodium and free hydroxide to determine whether those changes had a significant effect on filter flux. The feed slurries for the MST filterability tests were composed of simple salts (NaOH, NaNO2, and NaNO3) and MST (0.2 – 4.8 g/L). The feed slurry for the filter enhancer tests contained simulated salt batch 6 supernate, MST, and filter enhancers.

  6. Reactor Vessel Surveillance Program for Advanced Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kyeong-Hoon; Kim, Tae-Wan; Lee, Gyu-Mahn; Kim, Jong-Wook; Park, Keun-Bae; Kim, Keung-Koo

    2008-10-15

    This report provides the design requirements of an integral type reactor vessel surveillance program for an integral type reactor in accordance with the requirements of Korean MEST (Ministry of Education, Science and Technology Development) Notice 2008-18. This report covers the requirements for the design of surveillance capsule assemblies including their test specimens, test block materials, handling tools, and monitors of the surveillance capsule neutron fluence and temperature. In addition, this report provides design requirements for the program for irradiation surveillance of reactor vessel materials, a layout of specimens and monitors in the surveillance capsule, procedures of installation and retrieval of the surveillance capsule assemblies, and the layout of the surveillance capsule assemblies in the reactor.

  7. Guided image filtering.

    Science.gov (United States)

    He, Kaiming; Sun, Jian; Tang, Xiaoou

    2013-06-01

    In this paper, we propose a novel explicit image filter called guided filter. Derived from a local linear model, the guided filter computes the filtering output by considering the content of a guidance image, which can be the input image itself or another different image. The guided filter can be used as an edge-preserving smoothing operator like the popular bilateral filter [1], but it has better behaviors near edges. The guided filter is also a more generic concept beyond smoothing: It can transfer the structures of the guidance image to the filtering output, enabling new filtering applications like dehazing and guided feathering. Moreover, the guided filter naturally has a fast and nonapproximate linear time algorithm, regardless of the kernel size and the intensity range. Currently, it is one of the fastest edge-preserving filters. Experiments show that the guided filter is both effective and efficient in a great variety of computer vision and computer graphics applications, including edge-aware smoothing, detail enhancement, HDR compression, image matting/feathering, dehazing, joint upsampling, etc.

  8. Broad spectrum moderators and advanced reflector filters using 208Pb

    DEFF Research Database (Denmark)

    Schönfeldt, Troels; Batkov, K.; Klinkby, Esben Bryndt

    2015-01-01

    thermalizing property of 208Pb to design a broad spectrum moderator, i.e. a moderator which emits thermal and cold neutrons from the same position. Using 208Pb as a reflector filter material is shown to be slightly less efficient than a conventional beryllium reflector filter. However, when surrounding...... the reflector filter by a cold moderator it is possible to regain the neutrons with wavelengths below the Bragg edge, which are suppressed in the beryllium reflector filter. In both the beryllium and lead case surrounding the reflector filter with a cold moderator increases the cold brightness significantly......Cold and thermal neutrons used in neutrons scattering experiments are produced in nuclear reactors and spallation sources. The neutrons are cooled to thermal or cold temperatures in thermal and cold moderators, respectively. The present study shows that it is possible to exploit the poor...

  9. Computer Aided Filter Design.

    Science.gov (United States)

    1987-12-01

    FIR filter can be described in the following. [Ref. 2] 1. FIR filters with exact linear phase can be easily designed. Linear phase filters are important...response for the four cases of linear phase filter , i.e., even or odd symmetry with an even or odd number of terms, can be written in the form: H (eJ ) = e...Ansari, The Design and Application of Optimal FIR Fractional Phase Filters , IEEE on Acoutics, Speech and Signal Processing, Vol. 2, 1987, pp.896-899. 77 14

  10. A unified Kalman filter

    Science.gov (United States)

    Stubberud, Allen R.

    2017-01-01

    When considering problems of linear sequential estimation, two versions of the Kalman filter, the continuous-time version and the discrete-time version, are often used. (A hybrid filter also exists.) In many applications in which the Kalman filter is used, the system to which the filter is applied is a linear continuous-time system, but the Kalman filter is implemented on a digital computer, a discrete-time device. The two general approaches for developing a discrete-time filter for implementation on a digital computer are: (1) approximate the continuous-time system by a discrete-time system (called discretization of the continuous-time system) and develop a filter for the discrete-time approximation; and (2) develop a continuous-time filter for the system and then discretize the continuous-time filter. Generally, the two discrete-time filters will be different, that is, it can be said that discretization and filter generation are not, in general, commutative operations. As a result, any relationship between the discrete-time and continuous-time versions of the filter for the same continuous-time system is often obfuscated. This is particularly true when an attempt is made to generate the continuous-time version of the Kalman filter through a simple limiting process (the sample period going to zero) applied to the discrete-time version. The correct result is, generally, not obtained. In a 1961 research report, Kalman showed that the continuous-time Kalman filter can be obtained from the discrete-time Kalman filter by taking limits as the sample period goes to zero if the white noise process for the continuous-time version is appropriately defined. Using this basic concept, a discrete-time Kalman filter can be developed for a continuous-time system as follows: (1) discretize the continuous-time system using Kalman's technique; and (2) develop a discrete-time Kalman filter for that discrete-time system. Kalman's results show that the discrete-time filter generated in

  11. Bias aware Kalman filters

    DEFF Research Database (Denmark)

    Drecourt, J.-P.; Madsen, H.; Rosbjerg, Dan

    2006-01-01

    . The colored noise filter formulation is extended to correct both time correlated and uncorrelated model error components. A more stable version of the separate filter without feedback is presented. The filters are implemented in an ensemble framework using Latin hypercube sampling. The techniques...... are illustrated on a simple one-dimensional groundwater problem. The results show that the presented filters outperform the standard Kalman filter and that the implementations with bias feedback work in more general conditions than the implementations without feedback. 2005 Elsevier Ltd. All rights reserved....

  12. SNTP program reactor design

    Science.gov (United States)

    Walton, Lewis A.; Sapyta, Joseph J.

    1993-06-01

    The Space Nuclear Thermal Propulsion (SNTP) program is evaluating the feasibility of a particle bed reactor for a high-performance nuclear thermal rocket engine. Reactors operating between 500 MW and 2,000 MW will produce engine thrusts ranging from 20,000 pounds to 80,000 pounds. The optimum reactor arrangement depends on the power level desired and the intended application. The key components of the reactor have been developed and are being tested. Flow-to-power matching considerations dominate the thermal-hydraulic design of the reactor. Optimal propellant management during decay heat cooling requires a three-pronged approach. Adequate computational methods exist to perform the neutronics analysis of the reactor core. These methods have been benchmarked to critical experiment data.

  13. Hybrid reactors. [Fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.

    1980-09-09

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of /sup 233/U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m/sup -2/, and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid.

  14. Fast Spectrum Reactors

    CERN Document Server

    Todd, Donald; Tsvetkov, Pavel

    2012-01-01

    Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

  15. Ceramic fiber filter technology

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, B.L.; Janney, M.A.

    1996-06-01

    Fibrous filters have been used for centuries to protect individuals from dust, disease, smoke, and other gases or particulates. In the 1970s and 1980s ceramic filters were developed for filtration of hot exhaust gases from diesel engines. Tubular, or candle, filters have been made to remove particles from gases in pressurized fluidized-bed combustion and gasification-combined-cycle power plants. Very efficient filtration is necessary in power plants to protect the turbine blades. The limited lifespan of ceramic candle filters has been a major obstacle in their development. The present work is focused on forming fibrous ceramic filters using a papermaking technique. These filters are highly porous and therefore very lightweight. The papermaking process consists of filtering a slurry of ceramic fibers through a steel screen to form paper. Papermaking and the selection of materials will be discussed, as well as preliminary results describing the geometry of papers and relative strengths.

  16. LMFBR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kanbe, Mitsuru

    1997-04-04

    An LMFBR type reactor comprises a plurality of reactor cores in a reactor container. Namely, a plurality of pot containing vessels are disposed in the reactor vessel and a plurality of reactor cores are formed in a state where an integrated-type fuel assembly is each inserted to a pot, and a coolant pipeline is connected to each of the pot containing-vessel to cool the reactor core respectively. When fuels are exchanged, the integrated-type fuel assembly is taken out together with the pot from the reactor vessel in a state where the integrated-type fuel assembly is immersed in the coolants in the pot as it is. Accordingly, coolants are supplied to each of the pot containing-vessel connected with the coolant pipeline and circulate while cooling the integrated-type fuel assembly for every pot. Then, when the fuels are exchanged, the integrated type fuel assembly is taken out to the outside of the reactor together with the pot by taking up the pot from the pot-containing vessel. Then, neutron economy is improved to thereby improve reactor power and the breeding ratio. (N.H.)

  17. INVAP's Research Reactor Designs

    Directory of Open Access Journals (Sweden)

    Eduardo Villarino

    2011-01-01

    Full Text Available INVAP, an Argentine company founded more than three decades ago, is today recognized as one of the leaders within the research reactor industry. INVAP has participated in several projects covering a wide range of facilities, designed in accordance with the requirements of our different clients. For complying with these requirements, INVAP developed special skills and capabilities to deal with different fuel assemblies, different core cooling systems, and different reactor layouts. This paper summarizes the general features and utilization of several INVAP research reactor designs, from subcritical and critical assemblies to high-power reactors.

  18. Multi purpose research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Raina, V.K. [Research Reactor Design and Projects Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)]. E-mail: vkrain@magnum.barc.ernet.in; Sasidharan, K. [Research Reactor Design and Projects Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Sengupta, Samiran [Research Reactor Design and Projects Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Singh, Tej [Research Reactor Services Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

    2006-04-15

    At present Dhruva and Cirus reactors provide the majority of research reactor based facilities to cater to the various needs of a vast pool of researchers in the field of material sciences, physics, chemistry, bio sciences, research and development work for nuclear power plants and production of radio isotopes. With a view to further consolidate and expand the scope of research and development in nuclear and allied sciences, a new 20 MWt multi purpose research reactor is being designed. This paper describes some of the design features and safety aspects of this reactor.

  19. 去除致嗅物质的不同填料曝气生物滤池的启动特性与去除效果比较%Comparison of Start-up Characteristics and Odorant Removal Efficiencies of Biological Aerated Filters Different in Filling

    Institute of Scientific and Technical Information of China (English)

    吴媛媛; 杨宁宁; 邓超; 文湘华; 闫海; 孙体昌

    2013-01-01

    搭建了填料分别为生物陶粒(CPs)和颗粒活性炭(GAC)的2个曝气生物滤池(BAF)反应器,通过考察土嗅素和2-甲基异崁醇(2-MIB)这2种致嗅物质的去除效果和稳定周期,研究不同填料BAF的启动与挂膜特性.结果表明,在相同进水条件下,2种填料BAF去除溶解性总有机碳(DOC)的效率无明显差异,均在24d时达到稳定,且DOC去除率均基本稳定在70%以上.2种填料BAF去除土嗅素和2-MIB所需的启动时间有较大差异,CPs-BAF启动时间分别为30和26 d,而GAC-BAF启动时间分别为62和43 d.GAC-BAF和CPs-BAF对土嗅素的去除率分别稳定在约95%和69%,前者的去除率和稳定性明显高于后者;GAC-BAF和CPs-BAF对2-MIB的去除率分别稳定在约75%和73%,两者相差不大,但前者的稳定性强于后者.%Two biological aerated fiher (BAF) reactors using different fillings,separately,i.e.ceramic pellets (CPs)and granular active carbon (GAC),were built and used to remove geosmin and 2-MIB from water.Further,their startup characteristics were investigated by comparing odorant removal efficiencies and start-up time.At the same influent water,the two BAFs were quite similar in dissolved organic carbon (DOC) removal efficiency and both removal rates stabilized over 70% in 24 days.However,the two BAFs differed significantly in start-up time for removing geosmin and 2-MIB,separately,i.e.30 and 26 days respectively in CPs-BAF and 62 and 43 days respectively in GAC-BAF.Moreover,the geosmin removal rates in GAC-BAF and CPs-BAF were stable at about 95% and 69%,respectively,and the rate and stability for geosmin removal of the former was obviously higher than of the latter.And the removal rates of 2-MIB in GAC-BAF and CPs-BAF were similar to each other and stable at about 75% and 73%,respectively,but the stability of the former was higher than of the latter.

  20. Three-zone pupil filters

    Science.gov (United States)

    Sheppard, Colin J. R.; Campos, Juan; Escalera, Juan C.; Ledesma, Silvia

    2008-07-01

    The performance of pupil filters consisting of three zones each of constant complex amplitude transmittance is investigated. For filters where the transmittance is real, different classes of potentially useful filter are identified. These include leaky filters with an inner zone of low amplitude transmittance, pure phase filters with phase change of π, and equal area filters.

  1. Task 3.13 - hot-gas filter testing. Semi-annual report, July 1, 1996--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, M.L.

    1998-12-31

    The objectives of the hot-gas cleanup (HGC) work on the transport reactor demonstration unit (TRDU) located at the Energy & Environmental Research Center (EERC) is to demonstrate acceptable performance of hot-gas filter elements in a pilot-scale system prior to long-term demonstration tests. The primary focus of the experimental effort in the 3-year project is the testing of hot-gas filter element performance (particulate collection efficiency, filter pressure differential, filter cleanability, and durability) as a function of temperature and filter face velocity during short term operation (100-200 hours). The filter vessel is used in combination with the TRDU to evaluate the performance of selected hot-gas filter elements under gasification operating conditions. This work directly supports the power systems development facility utilizing the M.W. Kellogg transport reactor located at Wilsonville, Alabama and, indirectly, the Foster Wheeler advanced pressurized fluid-bed combustor, also located at Wilsonville.

  2. Generic Kalman Filter Software

    Science.gov (United States)

    Lisano, Michael E., II; Crues, Edwin Z.

    2005-01-01

    The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on

  3. Degradation Mechanisms of Colloidal Organic Matter in Biofilm Reactors

    DEFF Research Database (Denmark)

    Larsen, Tove; Harremoës, Poul

    1994-01-01

    The degradation mechanisms of colloidal organic matter in biofilm reactors have been studied in an idealized laboratory reactor system with soluble starch as a model substrate. Batch tests and experiments with different reactor configurations have shown that for this specific substrate, bulk liquid......-diffusible organic matter in a biofilm reactor. DH depends on the combined volumetric and surface hydraulic loading rate, Q2/(AV). In full-scale wastewater treatment plants, the degradation mechanism presented in this paper can explain important differences between the performance of trickling filters and RBC...... hydrolysis is the mechanism for transforming non-diffusible organic matter into biofilm diffusible substrate. A simplified mathematical description has led to the identification of the degree of hydrolysis, DH, as the parameter expressing the major difference between degradation of diffusible and non...

  4. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2001-04-01

    The activities of the Reactor Materials Research Department of the Belgian Nuclear Research Centre SCK-CEN in 2000 are summarised. The programmes within the department are focussed on studies concerning (1) fusion, in particular mechanical testing; (2) Irradiation Assisted Stress Corrosion Cracking (IASCC); (3) nuclear fuel; and (4) Reactor Pressure Vessel Steel (RPVS)

  5. Space Nuclear Reactor Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Poston, David Irvin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-06

    We needed to find a space reactor concept that could be attractive to NASA for flight and proven with a rapid turnaround, low-cost nuclear test. Heat-pipe-cooled reactors coupled to Stirling engines long identified as the easiest path to near-term, low-cost concept.

  6. Light water reactor program

    Energy Technology Data Exchange (ETDEWEB)

    Franks, S.M.

    1994-12-31

    The US Department of Energy`s Light Water Reactor Program is outlined. The scope of the program consists of: design certification of evolutionary plants; design, development, and design certification of simplified passive plants; first-of-a-kind engineering to achieve commercial standardization; plant lifetime improvement; and advanced reactor severe accident program. These program activities of the Office of Nuclear Energy are discussed.

  7. Concentric Split Flow Filter

    Science.gov (United States)

    Stapleton, Thomas J. (Inventor)

    2015-01-01

    A concentric split flow filter may be configured to remove odor and/or bacteria from pumped air used to collect urine and fecal waste products. For instance, filter may be designed to effectively fill the volume that was previously considered wasted surrounding the transport tube of a waste management system. The concentric split flow filter may be configured to split the air flow, with substantially half of the air flow to be treated traveling through a first bed of filter media and substantially the other half of the air flow to be treated traveling through the second bed of filter media. This split flow design reduces the air velocity by 50%. In this way, the pressure drop of filter may be reduced by as much as a factor of 4 as compare to the conventional design.

  8. Crux vena cava filter.

    Science.gov (United States)

    Murphy, Erin H; Johnson, Eric D; Kopchok, George E; Fogarty, Thomas J; Arko, Frank R

    2009-09-01

    Inferior vena cava filters are widely accepted for pulmonary embolic prophylaxis in high-risk patients with contraindications to anticoagulation. While long-term complications have been associated with permanent filters, retrievable filters are now available and have resulted in the rapid expansion of this technology. Nonetheless, complications are still reported with optional filters. Furthermore, device tilting and thrombus load may prevent retrieval in up to 30% of patients, thereby eliminating the benefits of this technology. The Crux vena cava filter is a novel, self-centering, low-profile filter that is designed for ease of delivery, retrievability and improved efficacy while limiting fatigue-related device complications. This device has been proven safe and user-friendly in an ovine model and has recently been implanted in human subjects.

  9. CrowdFilter

    DEFF Research Database (Denmark)

    Mortensen, Michael Lind; Wallace, Byron C.; Kraska, Tim

    for complex multi-criteria search problems through crowdsourcing. The CrowdFilter system is capable of supporting both criteria-level labels and n-gram rationales, capturing the human decision making process behind each filtering choice. Using the data provided through CrowdFilter we also introduce a novel......Multi-criteria filtering of mixed open/closed-world data is a time-consuming task, requiring significant manual effort when latent open-world attributes are present. In this work we introduce a novel open-world filtering framework CrowdFilter, enabling automatic UI generation and label elicitation...... multi-criteria active learning method; capable of incorporating labels and n-gram rationales per inclusion criteria, and thus capable of determining both clear includes/excludes, as well as complex borderline cases. By incorporating the active learning approach into the elicitation process of Crowd...

  10. Conservative Noise Filters

    Directory of Open Access Journals (Sweden)

    Mona M.Jamjoom

    2016-05-01

    Full Text Available Noisy training data have a huge negative impact on machine learning algorithms. Noise-filtering algorithms have been proposed to eliminate such noisy instances. In this work, we empirically show that the most popular noise-filtering algorithms have a large False Positive (FP error rate. In other words, these noise filters mistakenly identify genuine instances as outliers and eliminate them. Therefore, we propose more conservative outlier identification criteria that improve the FP error rate and, thus, the performance of the noise filters. With the new filter, an instance is eliminated if and only if it is misclassified by a mutual decision of Naïve Bayesian (NB classifier and the original filtering criteria being used. The number of genuine instances that are incorrectly eliminated is reduced as a result, thereby improving the classification accuracy.

  11. Doping-dependent critical current properties in K, Co, and P-doped BaF e2A s2 single crystals

    Science.gov (United States)

    Ishida, Shigeyuki; Song, Dongjoon; Ogino, Hiraku; Iyo, Akira; Eisaki, Hiroshi; Nakajima, Masamichi; Shimoyama, Jun-ichi; Eisterer, Michael

    2017-01-01

    In order to establish the doping dependence of the critical current properties in the iron-based superconductors, the in-plane critical current density Jc of BaF e2A s2 -based superconductors B a1 -xKxF e2A s2 (K-Ba122), Ba (F e1 -xC ox)2A s2 (Co-Ba122), and BaF e2(As1-xPx) 2 (P-Ba122) in a wide range of doping concentration x was investigated by means of magnetization hysteresis loop (MHL) measurements on single-crystal samples. Depending on the dopant elements and their concentration, Jc exhibits a variety of magnetic-field H and temperature T dependences. (1) In the case of K-Ba122, the MHL of the underdoped samples (x ≤0.33 ) exhibits a second magnetization peak (SMP), which sustains high Jc at high H and high T , exceeding 105A /c m2 at T = 25 K and μ0H = 6 T for x = 0.30 . On the other hand, the SMP is missing in the optimally (x ˜ 0.36 -0.40 ) and overdoped (x ˜ 0.50 ) samples and consequently Jc rapidly decreases by more than one order of magnitude, although the change in Tc is within a few K. (2) For Co-Ba122, the SMP is always present over the entire superconducting (SC) dome from the underdoped (x ˜ 0.05 ) to the overdoped (x ˜ 0.12 ) region. However, the magnitude of Jc significantly changes with x , exhibiting a sharp maximum at x ˜ 0.057 , which is a slightly underdoped composition for Co-Ba122. (3) For P-Ba122, the highest Jc is attained at x = 0.30 , corresponding to the highest Tc composition. For the overdoped samples, the MHL is characterized by a SMP located close to the irreversibility field Hirr. Common to the three doping variations, Jc becomes highest at the underdoping side of the SC dome near the phase boundary between the SC phase and the antiferromagnetic-orthorhombic (AFO) phase. Also, the peak appears in a narrow range of doping, distinct from the Tc dome with a broad maximum. These similarities in the three cases indicate that the observed doping dependence of Jc is intrinsic to the BaF e2A s2 -based superconductors. The

  12. Status of French reactors

    Energy Technology Data Exchange (ETDEWEB)

    Ballagny, A. [Commissariat a l`Energie Atomique, Saclay (France)

    1997-08-01

    The status of French reactors is reviewed. The ORPHEE and RHF reactors can not be operated with a LEU fuel which would be limited to 4.8 g U/cm{sup 3}. The OSIRIS reactor has already been converted to LEU. It will use U{sub 3}Si{sub 2} as soon as its present stock of UO{sub 2} fuel is used up, at the end of 1994. The decision to close down the SILOE reactor in the near future is not propitious for the start of a conversion process. The REX 2000 reactor, which is expected to be commissioned in 2005, will use LEU (except if the fast neutrons core option is selected). Concerning the end of the HEU fuel cycle, the best option is reprocessing followed by conversion of the reprocessed uranium to LEU.

  13. Nuclear reactor design

    CERN Document Server

    2014-01-01

    This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.

  14. Mirror reactor surface study

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A. L.; Damm, C. C.; Futch, A. H.; Hiskes, J. R.; Meisenheimer, R. G.; Moir, R. W.; Simonen, T. C.; Stallard, B. W.; Taylor, C. E.

    1976-09-01

    A general survey is presented of surface-related phenomena associated with the following mirror reactor elements: plasma first wall, ion sources, neutral beams, director converters, vacuum systems, and plasma diagnostics. A discussion of surface phenomena in possible abnormal reactor operation is included. Several studies which appear to merit immediate attention and which are essential to the development of mirror reactors are abstracted from the list of recommended areas for surface work. The appendix contains a discussion of the fundamentals of particle/surface interactions. The interactions surveyed are backscattering, thermal desorption, sputtering, diffusion, particle ranges in solids, and surface spectroscopic methods. A bibliography lists references in a number of categories pertinent to mirror reactors. Several complete published and unpublished reports on surface aspects of current mirror plasma experiments and reactor developments are also included.

  15. Hybrid Filter Membrane

    Science.gov (United States)

    Laicer, Castro; Rasimick, Brian; Green, Zachary

    2012-01-01

    Cabin environmental control is an important issue for a successful Moon mission. Due to the unique environment of the Moon, lunar dust control is one of the main problems that significantly diminishes the air quality inside spacecraft cabins. Therefore, this innovation was motivated by NASA s need to minimize the negative health impact that air-suspended lunar dust particles have on astronauts in spacecraft cabins. It is based on fabrication of a hybrid filter comprising nanofiber nonwoven layers coated on porous polymer membranes with uniform cylindrical pores. This design results in a high-efficiency gas particulate filter with low pressure drop and the ability to be easily regenerated to restore filtration performance. A hybrid filter was developed consisting of a porous membrane with uniform, micron-sized, cylindrical pore channels coated with a thin nanofiber layer. Compared to conventional filter media such as a high-efficiency particulate air (HEPA) filter, this filter is designed to provide high particle efficiency, low pressure drop, and the ability to be regenerated. These membranes have well-defined micron-sized pores and can be used independently as air filters with discreet particle size cut-off, or coated with nanofiber layers for filtration of ultrafine nanoscale particles. The filter consists of a thin design intended to facilitate filter regeneration by localized air pulsing. The two main features of this invention are the concept of combining a micro-engineered straight-pore membrane with nanofibers. The micro-engineered straight pore membrane can be prepared with extremely high precision. Because the resulting membrane pores are straight and not tortuous like those found in conventional filters, the pressure drop across the filter is significantly reduced. The nanofiber layer is applied as a very thin coating to enhance filtration efficiency for fine nanoscale particles. Additionally, the thin nanofiber coating is designed to promote capture of

  16. Oriented Fiber Filter Media

    Directory of Open Access Journals (Sweden)

    R. Bharadwaj

    2008-06-01

    Full Text Available Coalescing filters are widely used throughout industry and improved performance will reduce droplet emissions and operating costs. Experimental observations show orientation of micro fibers in filter media effect the permeability and the separation efficiency of the filter media. In this work two methods are used to align the fibers to alter the filter structure. The results show that axially aligned fiber media improve quality factor on the order of 20% and cutting media on an angle from a thick layered media can improve performance by about 40%. The results also show the improved performance is not monotonically correlated to the average fiber angle of the medium.

  17. Fundamentals of Stochastic Filtering

    CERN Document Server

    Crisan, Dan

    2008-01-01

    The objective of stochastic filtering is to determine the best estimate for the state of a stochastic dynamical system from partial observations. The solution of this problem in the linear case is the well known Kalman-Bucy filter which has found widespread practical application. The purpose of this book is to provide a rigorous mathematical treatment of the non-linear stochastic filtering problem using modern methods. Particular emphasis is placed on the theoretical analysis of numerical methods for the solution of the filtering problem via particle methods. The book should provide sufficient

  18. Filter holder and gasket assembly for candle or tube filters

    Science.gov (United States)

    Lippert, Thomas Edwin; Alvin, Mary Anne; Bruck, Gerald Joseph; Smeltzer, Eugene E.

    1999-03-02

    A filter holder and gasket assembly for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut.

  19. Slurry reactor design studies

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. (Bechtel Group, Inc., San Francisco, CA (USA)); Akgerman, A. (Texas A and M Univ., College Station, TX (USA)); Smith, J.M. (California Univ., Davis, CA (USA))

    1990-06-01

    The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

  20. Fast Anisotropic Gauss Filtering

    NARCIS (Netherlands)

    Geusebroek, J.M.; Smeulders, A.W.M.; van de Weijer, J.; Heyden, A.; Sparr, G.; Nielsen, M.; Johansen, P.

    2002-01-01

    We derive the decomposition of the anisotropic Gaussian in a one dimensional Gauss filter in the x-direction followed by a one dimensional filter in a non-orthogonal direction phi. So also the anisotropic Gaussian can be decomposed by dimension. This appears to be extremely efficient from a computin

  1. Multilevel ensemble Kalman filter

    KAUST Repository

    Chernov, Alexey

    2016-01-06

    This work embeds a multilevel Monte Carlo (MLMC) sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF). In terms of computational cost vs. approximation error the asymptotic performance of the multilevel ensemble Kalman filter (MLEnKF) is superior to the EnKF s.

  2. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Wells, George; Beaton, Dorcas E; Tugwell, Peter;

    2014-01-01

    The "Discrimination" part of the OMERACT Filter asks whether a measure discriminates between situations that are of interest. "Feasibility" in the OMERACT Filter encompasses the practical considerations of using an instrument, including its ease of use, time to complete, monetary costs, and inter...

  3. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  4. Gas cooled fast reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-06-01

    Although most of the development work on fast breeder reactors has been devoted to the use of liquid metal cooling, interest has been expressed for a number of years in alternative breeder concepts using other coolants. One of a number of concepts in which interest has been retained is the Gas-Cooled Fast Reactor (GCFR). As presently envisioned, it would operate on the uranium-plutonium mixed oxide fuel cycle, similar to that used in the Liquid Metal Fast Breeder Reactor (LMFBR), and would use helium gas as the coolant.

  5. Microfluidic electrochemical reactors

    Science.gov (United States)

    Nuzzo, Ralph G [Champaign, IL; Mitrovski, Svetlana M [Urbana, IL

    2011-03-22

    A microfluidic electrochemical reactor includes an electrode and one or more microfluidic channels on the electrode, where the microfluidic channels are covered with a membrane containing a gas permeable polymer. The distance between the electrode and the membrane is less than 500 micrometers. The microfluidic electrochemical reactor can provide for increased reaction rates in electrochemical reactions using a gaseous reactant, as compared to conventional electrochemical cells. Microfluidic electrochemical reactors can be incorporated into devices for applications such as fuel cells, electrochemical analysis, microfluidic actuation, pH gradient formation.

  6. Vena cava filter; Vena-cava-Filter

    Energy Technology Data Exchange (ETDEWEB)

    Helmberger, T. [Klinikum Bogenhausen, Institut fuer Diagnostische und Interventionelle Radiologie und Nuklearmedizin, Muenchen (Germany)

    2007-05-15

    Fulminant pulmonary embolism is one of the major causes of death in the Western World. In most cases, deep leg and pelvic venous thrombosis are the cause. If an anticoagulant/thrombotic therapy is no longer possible or ineffective, a vena cava filter implant may be indicated if an embolism is threatening. Implantation of the filter is a simple and safe intervention. Nevertheless, it is necessary to take into consideration that the data base for determining the indications for this treatment are very limited. Currently, a reduction in the risk of thromboembolism with the use of filters of about 30%, of recurrences of almost 5% and fatal pulmonary embolism of 1% has been reported, with a risk of up to 20% of filter induced vena cava thrombosis. (orig.) [German] Die fulminante Lungenembolie zaehlt zu den Haupttodesursachen in der westlichen Welt. In der Mehrzahl der Faelle sind tiefe Bein- und Beckenvenenthrombosen ursaechlich verantwortlich. Ist eine antikoagulative/-thrombotische Therapie nicht (mehr) moeglich oder unwirksam, kann bei drohender Emboliegefahr die Vena-cava-Filterimplantation indiziert sein. Die Filterimplantation ist eine einfache und sehr sichere Intervention. Dennoch muss bei der Indikationsstellung beruecksichtigt werden, dass die Datenlage zur Wirksamkeit sehr limitiert ist. So wird aktuell ueber eine Reduktion des Thrombembolierisikos um 30% bei Embolierezidiven von knapp 5% und fatalen Lungenembolien von 1% unter Filterprophylaxe berichtet, bei einem Risiko von bis zu 20% fuer die filterinduzierte Vena-cava-Thrombose. (orig.)

  7. Enhanced processability of ZrF4-BaF2-LaF3-AlF3-NaF glass in microgravity

    Science.gov (United States)

    Torres, Anthony; Ganley, Jeff; Maji, Arup; Tucker, Dennis; Starodubov, Dmitry

    2013-06-01

    Fluorozirconate glasses, such as ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF), have the potential for optical transmission from 0.3 μm in the UV to 7 μm in the IR region. However, crystallites formed during the fiber drawing process prevent this glass from achieving its desired transmission range. The temperature at which the glass can be drawn into a fiber is known as the working range, defined as (Tx - Tg), bounded by the glass transition temperature (Tg) and the crystallization temperature (Tx). In contrast to silica glasses, the working temperature range for ZBLAN glass is extremely narrow. Multiple ZBLAN samples were subject to a heating and quenching test apparatus on the parabolic aircraft, under a controlled 0-g and hyper-g environment and compared with 1-g ground tests. The microgravity duration on board Zero-G Corporation parabolic aircraft is approximately 20 seconds and the hyper-g intervals are approximately 56 seconds. Optical microscopy examination elucidates crystal growth in ZBLAN is suppressed when processed in a microgravity environment. The crystallization temperature, Tx, at which crystals form increased, therefore, significantly broadening the working temperature range for ZBLAN.

  8. Electron paramagnetic resonance and optical spectroscopy of Yb sup 3 sup + ions in SrF sub 2 and BaF sub 2; an analysis of distortions of the crystal lattice near Yb sup 3 sup +

    CERN Document Server

    Falin, M L; Latypov, V A; Leushin, A M

    2003-01-01

    SrF sub 2 and BaF sub 2 crystals, doped with the Yb sup 3 sup + ions, have been investigated by electron paramagnetic resonance and optical spectroscopy. As-grown crystals of SrF sub 2 and BaF sub 2 show the two paramagnetic centres for the cubic (T sub c) and trigonal (T sub 4) symmetries of the Yb sup 3 sup + ions. Empirical diagrams of the energy levels were established and the potentials of the crystal field were determined. Information was obtained on the SrF sub 2 and BaF sub 2 phonon spectra from the electron-vibrational structure of the optical spectra. The crystal field parameters were used to analyse the crystal lattice distortions in the vicinity of the impurity ion and the F sup - ion compensating for the excess positive charge in T sub 4. Within the frames of a superposition model, it is shown that three F sup - ions from the nearest surrounding cube, located symmetrically with respect to the C sub 3 axis from the side of the ion-compensator, approach the impurity ion and cling to the axis of the...

  9. The quasi-binary phase diagram BaF2-BaBr2 and its relation to the x-ray storage phosphor BaFBr : Eu2+

    Science.gov (United States)

    Kolb, R.; Schlapp, M.; Hesse, S.; Schmechel, R.; von Seggern, H.; Fasel, C.; Riedel, R.; Ehrenberg, H.; Fuess, H.

    2002-08-01

    In order to understand the formation and stoichiometry of the x-ray storage phosphor BaFBr : Eu2+, the phase diagram of the quasi-binary BaF2-BaBr2 system has been investigated. The phase diagram was obtained by means of differential thermal analysis and temperature controlled x-ray diffraction experiments. The resulting phase diagram indicates that BaFBr forms a compound with no detectable solid solubility for neither BaF2 nor BaBr2. Experiments to obtain non-stoichiometric BaFBr via the synthesis route using BaF2 and NH4Br as proposed in the literature could not be verified. It will be shown that the type of colour centre created during x-ray irradiation is related to the non-stoichiometry of the starting compositions before sintering. A surplus of either barium fluoride or barium bromide during sintering allows the controlled formation of F(Br-)- and F(F-)-centres, respectively.

  10. Weighted guided image filtering.

    Science.gov (United States)

    Li, Zhengguo; Zheng, Jinghong; Zhu, Zijian; Yao, Wei; Wu, Shiqian

    2015-01-01

    It is known that local filtering-based edge preserving smoothing techniques suffer from halo artifacts. In this paper, a weighted guided image filter (WGIF) is introduced by incorporating an edge-aware weighting into an existing guided image filter (GIF) to address the problem. The WGIF inherits advantages of both global and local smoothing filters in the sense that: 1) the complexity of the WGIF is O(N) for an image with N pixels, which is same as the GIF and 2) the WGIF can avoid halo artifacts like the existing global smoothing filters. The WGIF is applied for single image detail enhancement, single image haze removal, and fusion of differently exposed images. Experimental results show that the resultant algorithms produce images with better visual quality and at the same time halo artifacts can be reduced/avoided from appearing in the final images with negligible increment on running times.

  11. Robustifying Vector Median Filter

    Directory of Open Access Journals (Sweden)

    Valentín Gregori

    2011-08-01

    Full Text Available This paper describes two methods for impulse noise reduction in colour images that outperform the vector median filter from the noise reduction capability point of view. Both methods work by determining first the vector median in a given filtering window. Then, the use of complimentary information from componentwise analysis allows to build robust outputs from more reliable components. The correlation among the colour channels is taken into account in the processing and, as a result, a more robust filter able to process colour images without introducing colour artifacts is obtained. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter. Objective measures demonstrate the goodness of the achieved improvement.

  12. Filter cake breaker systems

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Marcelo H.F. [Poland Quimica Ltda., Duque de Caxias, RJ (Brazil)

    2004-07-01

    Drilling fluids filter cakes are based on a combination of properly graded dispersed particles and polysaccharide polymers. High efficiency filter cakes are formed by these combination , and their formation on wellbore walls during the drilling process has, among other roles, the task of protecting the formation from instantaneous or accumulative invasion of drilling fluid filtrate, granting stability to well and production zones. Filter cake minimizes contact between drilling fluid filtrate and water, hydrocarbons and clay existent in formations. The uniform removal of the filter cake from the entire interval is a critical factor of the completion process. The main methods used to breaking filter cake are classified into two groups, external or internal, according to their removal mechanism. The aim of this work is the presentation of these mechanisms as well their efficiency. (author)

  13. Naive Bayesian for Email Filtering

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The paper presents a method of email filter based on Naive Bayesian theory that can effectively filter junk mail and illegal mail. Furthermore, the keys of implementation are discussed in detail. The filtering model is obtained from training set of email. The filtering can be done without the users specification of filtering rules.

  14. Axi-symmetrical flow reactor for .sup.196 Hg photochemical enrichment

    Science.gov (United States)

    Grossman, Mark W.

    1991-01-01

    The present invention is directed to an improved photochemical reactor useful for the isotopic enrichment of a predetermined isotope of mercury, especially, .sup.196 Hg. Specifically, two axi-symmetrical flow reactors were constructed according to the teachings of the present invention. These reactors improve the mixing of the reactants during the photochemical enrichment process, affording higher yields of the desired .sup.196 Hg product. Measurements of the variation of yield (Y) and enrichment factor (E) along the flow axis of these reactors indicates very substantial improvement in process uniformity compared to previously used photochemical reactor systems. In one preferred embodiment of the present invention, the photoreactor system was built such that the reactor chamber was removable from the system without disturbing the location of either the photochemical lamp or the filter employed therewith.

  15. Axi-symmetrical flow reactor for [sup 196]Hg photochemical enrichment

    Science.gov (United States)

    Grossman, M.W.

    1991-04-30

    The present invention is directed to an improved photochemical reactor useful for the isotopic enrichment of a predetermined isotope of mercury, especially, [sup 196]Hg. Specifically, two axi-symmetrical flow reactors were constructed according to the teachings of the present invention. These reactors improve the mixing of the reactants during the photochemical enrichment process, affording higher yields of the desired [sup 196]Hg product. Measurements of the variation of yield (Y) and enrichment factor (E) along the flow axis of these reactors indicates very substantial improvement in process uniformity compared to previously used photochemical reactor systems. In one preferred embodiment of the present invention, the photoreactor system was built such that the reactor chamber was removable from the system without disturbing the location of either the photochemical lamp or the filter employed therewith. 10 figures.

  16. Treatment of swine wastewater in UASB reactor and anaerobic filter in series followed of trickling filter

    OpenAIRE

    Rose Maria Duda; Roberto Alves de Oliveira

    2011-01-01

    Avaliou-se o desempenho de um reator anaeróbio de fluxo ascendente com manta de lodo (UASB) seguido de um filtro anaeróbio, instalados em série, com volume total de 300 L e 190 L, respectivamente, no tratamento de águas residuárias de suinocultura. As cargas orgânicas volumétricas aplicadas no reator UASB foram de 12,4;15,5; 23,2 e 26,3 g DQOtotal (L d)-1. Para o pós-tratamento do efluente do sistema anaeróbio em dois estágios utilizou-se um filtro biológico percolador com volume total de 250...

  17. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed.

  18. New reactor type proposed

    CERN Multimedia

    2003-01-01

    "Russian scientists at the Research Institute of Nuclear Power Engineering in Moscow are hoping to develop a new reactor that will use lead and bismuth as fuel instead of uranium and plutonium" (1/2 page).

  19. Reactor Neutrino Spectra

    CERN Document Server

    Hayes, A C

    2016-01-01

    We present a review of the antineutrino spectra emitted from reactors. Knowledge of these and their associated uncertainties are crucial for neutrino oscillation studies. The spectra used to-date have been determined by either conversion of measured electron spectra to antineutrino spectra or by summing over all of the thousands of transitions that makeup the spectra using modern databases as input. The uncertainties in the subdominant corrections to beta-decay plague both methods, and we provide estimates of these uncertainties. Improving on current knowledge of the antineutrino spectra from reactors will require new experiments. Such experiments would also address the so-called reactor neutrino anomaly and the possible origin of the shoulder observed in the antineutrino spectra measured in recent high-statistics reactor neutrino experiments.

  20. Reactor BR2. Introduction

    Energy Technology Data Exchange (ETDEWEB)

    Gubel, P

    2001-04-01

    The BR2 is a materials testing reactor and is still one of SCK-CEN's important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. During the last three years, the availability of the installation was maintained at an average level of 97.6 percent. In the year 2000, the reactor was operated for a total of 104 days at a mean power of 56 MW. In 2000, most irradiation experiments were performed in the CALLISTO PWR loop. The report describes irradiations achieved or under preparation in 2000, including the development of advanced facilities and concept studies for new programmes. An overview of the scientific irradiation programmes as well as of the R and D programme of the BR2 reactor in 2000 is given.

  1. Future Reactor Experiments

    OpenAIRE

    He, Miao

    2013-01-01

    The measurement of the neutrino mixing angle $\\theta_{13}$ opens a gateway for the next generation experiments to measure the neutrino mass hierarchy and the leptonic CP-violating phase. Future reactor experiments will focus on mass hierarchy determination and the precision measurement of mixing parameters. Mass hierarchy can be determined from the disappearance of reactor electron antineutrinos based on the interference effect of two separated oscillation modes. Relative and absolute measure...

  2. Reactor Neutrino Experiments

    OpenAIRE

    Cao, Jun

    2007-01-01

    Precisely measuring $\\theta_{13}$ is one of the highest priority in neutrino oscillation study. Reactor experiments can cleanly determine $\\theta_{13}$. Past reactor neutrino experiments are reviewed and status of next precision $\\theta_{13}$ experiments are presented. Daya Bay is designed to measure $\\sin^22\\theta_{13}$ to better than 0.01 and Double Chooz and RENO are designed to measure it to 0.02-0.03. All are heading to full operation in 2010. Recent improvements in neutrino moment measu...

  3. Department of Reactor Technology

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  4. Helias reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Beidler, C.D. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Grieger, G. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Harmeyer, E. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Kisslinger, J. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Karulin, N. [Nuclear Fusion Institute, Moscow (Russian Federation); Maurer, W. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany); Nuehrenberg, J. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Rau, F. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Sapper, J. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Wobig, H. [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany)

    1995-10-01

    The present status of Helias reactor studies is characterised by the identification and investigation of specific issues which result from the particular properties of this type of stellarator. On the technical side these are issues related to the coil system, while physics studies have concentrated on confinement, alpha-particle behaviour and ignition conditions. The usual assumptions have been made in those fields which are common to all toroidal fusion reactors: blanket and shield, refuelling and exhaust, safety and economic aspects. For blanket and shield sufficient space has been provided, a detailed concept will be developed in future. To date more emphasis has been placed on scoping and parameter studies as opposed to fixing a specific set of parameters and providing a detailed point study. One result of the Helias reactor studies is that physical dimensions are on the same order as those of tokamak reactors. However, it should be noticed that this comparison is difficult in view of the large spectrum of tokamak reactors ranging from a small reactor like Aries, to a large device such as SEAFP. The notion that the large aspect ratio of 10 or more in Helias configurations also leads to large reactors is misleading, since the large major radius of 22 m is compensated by the average plasma radius of 1.8 m and the average coil radius of 5 m. The plasma volume of 1400 m{sup 3} is about the same as the ITER reactor and the magnetic energy of the coil system is about the same or even slightly smaller than envisaged in ITER. (orig.)

  5. INVAP's Research Reactor Designs

    OpenAIRE

    Eduardo Villarino; Alicia Doval

    2011-01-01

    INVAP, an Argentine company founded more than three decades ago, is today recognized as one of the leaders within the research reactor industry. INVAP has participated in several projects covering a wide range of facilities, designed in accordance with the requirements of our different clients. For complying with these requirements, INVAP developed special skills and capabilities to deal with different fuel assemblies, different core cooling systems, and different reactor layouts. This paper ...

  6. The reactor antineutrino anomalies

    Energy Technology Data Exchange (ETDEWEB)

    Haser, Julia; Buck, Christian; Lindner, Manfred [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany)

    2016-07-01

    Major discoveries were made in the past few years in the field of neutrino flavour oscillation. Nuclear reactors produce a clean and intense flux of electron antineutrinos and are thus an essential neutrino source for the determination of oscillation parameters. Most currently the reactor antineutrino experiments Double Chooz, Daya Bay and RENO have accomplished to measure θ{sub 13}, the smallest of the three-flavour mixing angles. In the course of these experiments two anomalies emerged: (1) the reanalysis of the reactor predictions revealed a deficit in experimentally observed antineutrino flux, known as the ''reactor antineutrino anomaly''. (2) The high precision of the latest generation of neutrino experiments resolved a spectral shape distortion relative to the expected energy spectra. Both puzzles are yet to be solved and triggered new experimental as well as theoretical studies, with the search for light sterile neutrinos as most popular explanation for the flux anomaly. This talk outlines the two reactor antineutrino anomalies. Discussing possible explanations for their occurrence, recent and upcoming efforts to solve the reactor puzzles are highlighted.

  7. Moon base reactor system

    Science.gov (United States)

    Chavez, H.; Flores, J.; Nguyen, M.; Carsen, K.

    1989-01-01

    The objective of our reactor design is to supply a lunar-based research facility with 20 MW(e). The fundamental layout of this lunar-based system includes the reactor, power conversion devices, and a radiator. The additional aim of this reactor is a longevity of 12 to 15 years. The reactor is a liquid metal fast breeder that has a breeding ratio very close to 1.0. The geometry of the core is cylindrical. The metallic fuel rods are of beryllium oxide enriched with varying degrees of uranium, with a beryllium core reflector. The liquid metal coolant chosen was natural lithium. After the liquid metal coolant leaves the reactor, it goes directly into the power conversion devices. The power conversion devices are Stirling engines. The heated coolant acts as a hot reservoir to the device. It then enters the radiator to be cooled and reenters the Stirling engine acting as a cold reservoir. The engines' operating fluid is helium, a highly conductive gas. These Stirling engines are hermetically sealed. Although natural lithium produces a lower breeding ratio, it does have a larger temperature range than sodium. It is also corrosive to steel. This is why the container material must be carefully chosen. One option is to use an expensive alloy of cerbium and zirconium. The radiator must be made of a highly conductive material whose melting point temperature is not exceeded in the reactor and whose structural strength can withstand meteor showers.

  8. Status of neutron beam utilization at the Dalat nuclear research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Dien, Nguyen Nhi; Hai, Nguyen Canh [Nuclear Research Institute, Dalat (Viet Nam)

    2003-03-01

    The 500-kW Dalat nuclear research reactor was reconstructed from the USA-made 250-kW TRIGA Mark II reactor. After completion of renovation and upgrading, the reactor has been operating at its nominal power since 1984. The reactor is used mainly for radioisotope production, neutron activation analysis, neutron beam researches and reactor physics study. In the framework of the reconstruction and renovation project of the 1982-1984 period, the reactor core, the control and instrumentation system, the primary and secondary cooling systems, as well as other associated systems were newly designed and installed by the former Soviet Union. Some structures of the reactor, such as the reactor aluminum tank, the graphite reflector, the thermal column, horizontal beam tubes and the radiation concrete shielding have been remained from the previous TRIGA reactor. As a typical configuration of the TRIGA reactor, there are four neutron beam ports, including three radial and one tangential. Besides, there is a large thermal column. Until now only two-neutron beam ports and the thermal column have been utilized. Effective utilization of horizontal experimental channels is one of the important research objectives at the Dalat reactor. The research program on effective utilization of these experimental channels was conducted from 1984. For this purpose, investigations on physical characteristics of the reactor, neutron spectra and fluxes at these channels, safety conditions in their exploitation, etc. have been carried out. The neutron beams, however, have been used only since 1988. The filtered thermal neutron beams at the tangential channel have been extracted using a single crystal silicon filter and mainly used for prompt gamma neutron activation analysis (PGNAA), neutron radiography (NR) and transmission experiments (TE). The filtered quasi-monoenergetic keV neutron beams using neutron filters at the piercing channel have been used for nuclear data measurements, study on

  9. Derivative free filtering using Kalmtool

    DEFF Research Database (Denmark)

    Bayramoglu, Enis; Hansen, Søren; Ravn, Ole;

    2010-01-01

    In this paper we present a toolbox enabling easy evaluation and comparison of different filtering algorithms. The toolbox is called Kalmtool 4 and is a set of MATLAB tools for state estimation of nonlinear systems. The toolbox contains functions for extended Kalman filtering as well as for DD1...... filter and the DD2 filter. It also contains functions for Unscented Kalman filters as well as several versions of particle filters. The toolbox requires MATLAB version 7, but no additional toolboxes are required....

  10. Energy Consumption and Energy Potential of Miraco Bubble Aerated Oxidation Ditch & BAF and Measures of Energy Saving%微曝氧化沟+BAF污水深度处理能耗潜能分析与节能研究

    Institute of Scientific and Technical Information of China (English)

    时章明; 沈浩; 姜信杰; 陈通; 余煌

    2012-01-01

    The advanced treatment of urban sewage and the related energy consumption are issues for concern. The wastewater treatment process of miraco bubble-aerated oxidation ditch and biological aerated filter is studied in this paper, its energy consumption and the process energy potential are analyzed from the perspective of the technical process. The results show that the maximum power consumption in the process of miraco bubble-aerated oxidation ditch accounts for 54.59% in the total power consumption, followed by those in water pumping stations, sludge pumping stations and water pumping stations, respectively, which account for 13.49%, 9.56% and 8.69% in the total power consumption. The aeration system and the sewage sludge dynamic system take still the most important part in the energy consumption. The reductions of chemical energy potential and biological energy potential in the entire process are 231.6 × l06hj/d and 201.5 xl06kJ/d. The potential energy in the sewage water is higher than the total energy consumption, the rates of the increase in the energy consumption and decrease in the energy potential are the greatest in the miraco bubble-aerated oxidation ditch. Some energy-saving measures are proposed for the process, the electrical equipment and the re-use of resources.%城市污水的深度处理必然成为未来发展的趋势,污水处理的能耗问题已经引起人们的关注.某城市污水处理厂采用的是微曝氧化沟+生物曝气滤池(BAF)的污水深度处理工艺,从该工艺处理流程的角度进行了能耗与工序潜能分析,将能耗与潜能联系起来进行了研究.结果表明,工序中微曝氧化沟耗电量最大,占污水处理工艺总电耗的54.59%,其次是进水泵房、污泥泵房和出水泵房,分别占总电耗的13.49%,9.56%和8.69%,曝气系统和污水污泥的动力系统仍是耗能的重点;整个处理工序中化学与生化潜能的减少量分别为231.6×106kJ/d与201.5×106kJ/d,污水进

  11. Circuits and filters handbook

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    A bestseller in its first edition, The Circuits and Filters Handbook has been thoroughly updated to provide the most current, most comprehensive information available in both the classical and emerging fields of circuits and filters, both analog and digital. This edition contains 29 new chapters, with significant additions in the areas of computer-aided design, circuit simulation, VLSI circuits, design automation, and active and digital filters. It will undoubtedly take its place as the engineer's first choice in looking for solutions to problems encountered in the design, analysis, and behavi

  12. EMI filter design

    CERN Document Server

    Ozenbaugh, Richard Lee

    2011-01-01

    With today's electrical and electronics systems requiring increased levels of performance and reliability, the design of robust EMI filters plays a critical role in EMC compliance. Using a mix of practical methods and theoretical analysis, EMI Filter Design, Third Edition presents both a hands-on and academic approach to the design of EMI filters and the selection of components values. The design approaches covered include matrix methods using table data and the use of Fourier analysis, Laplace transforms, and transfer function realization of LC structures. This edition has been fully revised

  13. Randomized Filtering Algorithms

    DEFF Research Database (Denmark)

    Katriel, Irit; Van Hentenryck, Pascal

    2008-01-01

    of AllDifferent and is generalization, the Global Cardinality Constraint. The first delayed filtering scheme is a Monte Carlo algorithm: its running time is superior, in the worst case, to that of enforcing are consistency after every domain event, while its filtering effectiveness is analyzed...... in the expected sense. The second scheme is a Las Vegas algorithm using filtering triggers: Its effectiveness is the same as enforcing are consistency after every domain event, while in the expected case it is faster by a factor of m/n, where n and m are, respectively, the number of nodes and edges...

  14. Air Filter Simulation by Geodict

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-peng; Kitai Kim; Changhwan Lee; Jooyong Kim

    2006-01-01

    In this paper, we discussed the relationship of filter efficiency and pressure drop with the porosity, fiber diameter and filter thickness by Geodict. We found that filter efficiency will increase when filter porosity and fiber diameter decreasing or filter thickness increasing. And the pressure drop has a linear relationship with filter thickness and non-linear relationship with filter porosity and fiber diameter. We also compared the simulation results with the real test results by TSI 3160. Although there are some differences, I think Geodict can be used to predict filter efficiency and pressure drop.

  15. Reactor Safety Planning for Prometheus Project, for Naval Reactors Information

    Energy Technology Data Exchange (ETDEWEB)

    P. Delmolino

    2005-05-06

    The purpose of this letter is to submit to Naval Reactors the initial plan for the Prometheus project Reactor Safety work. The Prometheus project is currently developing plans for cold physics experiments and reactor prototype tests. These tests and facilities may require safety analysis and siting support. In addition to the ground facilities, the flight reactor units will require unique analyses to evaluate the risk to the public from normal operations and credible accident conditions. This letter outlines major safety documents that will be submitted with estimated deliverable dates. Included in this planning is the reactor servicing documentation and shipping analysis that will be submitted to Naval Reactors.

  16. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Kirwan, John R; Boers, Maarten; Hewlett, Sarah

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter presupposes an explicit framework for identifying the relevant core outcomes that are......OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter presupposes an explicit framework for identifying the relevant core outcomes...... that are universal to all studies of the effects of intervention effects. There is no published outline for instrument choice or development that is aimed at measuring outcome, was derived from broad consensus over its underlying philosophy, or includes a structured and documented critique. Therefore, a new proposal...

  17. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    D'Agostino, Maria-Antonietta; Boers, Maarten; Kirwan, John

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides a framework for the validation of outcome measures for use in rheumatology clinical research. However, imaging and biochemical measures may face additional validation challenges because of their technical nature. The Imagin...

  18. Paul Rodgersi filter Kohilas

    Index Scriptorium Estoniae

    2000-01-01

    28. I Kohila keskkoolis kohaspetsiifiline skulptuur ja performance "Filter". Kooli 130. aastapäeva tähistava ettevõtmise eesotsas oli skulptor Paul Rodgers ja kaks viimase klassi noormeest ئ Marko Heinmäe, Hendrik Karm.

  19. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Tugwell, Peter; Boers, Maarten; D'Agostino, Maria-Antonietta

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter requires that criteria be met to demonstrate that the outcome instrument meets...... the criteria for content, face, and construct validity. METHODS: Discussion groups critically reviewed a variety of ways in which case studies of current OMERACT Working Groups complied with the Truth component of the Filter and what issues remained to be resolved. RESULTS: The case studies showed...... that there is broad agreement on criteria for meeting the Truth criteria through demonstration of content, face, and construct validity; however, several issues were identified that the Filter Working Group will need to address. CONCLUSION: These issues will require resolution to reach consensus on how Truth...

  20. Paul Rodgersi filter Kohilas

    Index Scriptorium Estoniae

    2000-01-01

    28. I Kohila keskkoolis kohaspetsiifiline skulptuur ja performance "Filter". Kooli 130. aastapäeva tähistava ettevõtmise eesotsas oli skulptor Paul Rodgers ja kaks viimase klassi noormeest ئ Marko Heinmäe, Hendrik Karm.

  1. HEPA air filter (image)

    Science.gov (United States)

    ... pet dander and other irritating allergens from the air. Along with other methods to reduce allergens, such ... controlling the amount of allergens circulating in the air. HEPA filters can be found in most air ...

  2. Perspectives on Nonlinear Filtering

    KAUST Repository

    Law, Kody

    2015-01-07

    The solution to the problem of nonlinear filtering may be given either as an estimate of the signal (and ideally some measure of concentration), or as a full posterior distribution. Similarly, one may evaluate the fidelity of the filter either by its ability to track the signal or its proximity to the posterior filtering distribution. Hence, the field enjoys a lively symbiosis between probability and control theory, and there are plenty of applications which benefit from algorithmic advances, from signal processing, to econometrics, to large-scale ocean, atmosphere, and climate modeling. This talk will survey some recent theoretical results involving accurate signal tracking with noise-free (degenerate) dynamics in high-dimensions (infinite, in principle, but say d between 103 and 108 , depending on the size of your application and your computer), and high-fidelity approximations of the filtering distribution in low dimensions (say d between 1 and several 10s).

  3. Cryogenic coaxial microwave filters

    CERN Document Server

    Tancredi, G; Meeson, P J

    2014-01-01

    At millikelvin temperatures the careful filtering of electromagnetic radiation, especially in the microwave regime, is critical for controlling the electromagnetic environment for experiments in fields such as solid-state quantum information processing and quantum metrology. We present a design for a filter consisting of small diameter dissipative coaxial cables that is straightforward to construct and provides a quantitatively predictable attenuation spectrum. We describe the fabrication process and demonstrate that the performance of the filters is in good agreement with theoretical modelling. We further perform an indicative test of the performance of the filters by making current-voltage measurements of small, underdamped Josephson Junctions at 15 mK and we present the results.

  4. REACTOR GROUT THERMAL PROPERTIES

    Energy Technology Data Exchange (ETDEWEB)

    Steimke, J.; Qureshi, Z.; Restivo, M.; Guerrero, H.

    2011-01-28

    Savannah River Site has five dormant nuclear production reactors. Long term disposition will require filling some reactor buildings with grout up to ground level. Portland cement based grout will be used to fill the buildings with the exception of some reactor tanks. Some reactor tanks contain significant quantities of aluminum which could react with Portland cement based grout to form hydrogen. Hydrogen production is a safety concern and gas generation could also compromise the structural integrity of the grout pour. Therefore, it was necessary to develop a non-Portland cement grout to fill reactors that contain significant quantities of aluminum. Grouts generate heat when they set, so the potential exists for large temperature increases in a large pour, which could compromise the integrity of the pour. The primary purpose of the testing reported here was to measure heat of hydration, specific heat, thermal conductivity and density of various reactor grouts under consideration so that these properties could be used to model transient heat transfer for different pouring strategies. A secondary purpose was to make qualitative judgments of grout pourability and hardened strength. Some reactor grout formulations were unacceptable because they generated too much heat, or started setting too fast, or required too long to harden or were too weak. The formulation called 102H had the best combination of characteristics. It is a Calcium Alumino-Sulfate grout that contains Ciment Fondu (calcium aluminate cement), Plaster of Paris (calcium sulfate hemihydrate), sand, Class F fly ash, boric acid and small quantities of additives. This composition afforded about ten hours of working time. Heat release began at 12 hours and was complete by 24 hours. The adiabatic temperature rise was 54 C which was within specification. The final product was hard and displayed no visible segregation. The density and maximum particle size were within specification.

  5. Holographic interference filters

    Science.gov (United States)

    Diehl, Damon W.

    Holographic mirrors have wavelength-selection properties and thus qualify as a class of interference filters. Two theoretical methods for analyzing such structures are developed. The first method uses Hill's matrix method to yield closed-forms solutions in terms of the Floquet-Bloch waves within a periodic structure. A process is developed for implementing this solution method on a computer, using sparse-matrix memory allocation, numerical root-finding algorithms, and inverse-iteration techniques. It is demonstrated that Hill's matrix method is valid for the analysis of finite and multi-periodic problems. The second method of theoretical analysis is a transfer-matrix technique, which is herein termed thin-film decomposition. It is shown that the two methods of solution yield results that differ by, at worst, a fraction of a percent. Using both calculation techniques, a number of example problems are explored. Of key importance is the construction of a set of curves that are useful for the design and characterization of holographic interference filters. In addition to the theoretical development, methods are presented for the fabrication of holographic interference filters using DuPont HRF-800X001 photopolymer. Central to the exposure system is a frequency-stabilized, tunable dye laser. The types of filters fabricated include single-tone reflection filters, two types of multitone reflection filters, and reflection filters for infrared wavelengths. These filters feature index profiles that are not easily attainable through other fabrication methods. As a supplement to the body of the dissertation, the computer algorithms developed to implement Hill's matrix method and thin-film decomposition are also included as an appendix. Further appendices provide more information on Floquet's theorem and Hill's matrix method. A final appendix presents a design for an infrared laser spectrophotometer.

  6. The Endogenous Kalman Filter

    OpenAIRE

    Brad Baxter; Liam Graham; Stephen Wright

    2007-01-01

    We relax the assumption of full information that underlies most dynamic general equilibrium models, and instead assume agents optimally form estimates of the states from an incomplete information set. We derive a version of the Kalman filter that is endogenous to agents' optimising decisions, and state conditions for its convergence. We show the (restrictive) conditions under which the endogenous Kalman filter will at least asymptotically reveal the true states. In general we show that incomp...

  7. Scaleable, High Efficiency Microchannel Sabatier Reactor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A Microchannel Sabatier Reactor System (MSRS) consisting of cross connected arrays of isothermal or graded temperature reactors is proposed. The reactor array...

  8. DEGRADATION OF AROMATIC COMPOUNDS USING MOVING BED BIOFILM REACTORS

    Directory of Open Access Journals (Sweden)

    B. Ayati, H. Ganjidoust, M. Mir Fattah

    2007-04-01

    Full Text Available For biological treatment of water, there are many different biofilm systems in use. Examples of them are trickling filters, rotating biological contactors, fixed media submerged biofilters, granular media biofilters and fluidized bed reactors. They all have their advantages and disadvantages. Hence, the Moving Bed Biofilm Reactor process was developed in Norway in the late 1980s and early 1990s to adopt the best features of the activated sludge process as well as those of the biofilter processes, without including the worst. Two cylindrical moving bed biofilm reactors were used in this study working in upflow stream conditions. Experiments have been done in aerobic batch flow regime. Laboratory experiments were conducted at room temperature (23–28C and synthetic wastewater comprising a composition of phenol and hydroquinone in each reactor as the main organic constituents, plus balanced nutrients and alkalinity were used to feed the reactor. The ratio of influent to effluent COD was determined at different retention times. The results indicated that the removal efficiency of each selected compound is affected by the detention time. At low phenol and hydroquinone concentration (from 700 to 1000 mg/L maximum removal efficiency (over 80 % was obtained. By further increasing in COD loading rate up to 3000 mg/L, a decrease in COD removal rate was occurred. In the reactor containing pyrogallol in COD of 1500 mg/L, the removal rate decreased to 10 percent because of its toxicity for microorganisms.

  9. Far Ultraviolet Refractive Index of Optical Materials for Solar Blind Channel (SBC) Filters for HST Advanced Camera for Surveys

    Science.gov (United States)

    Leviton, Douglas B.; Madison, Timothy J.; Petrone, Peter

    1998-01-01

    Refractive index measurements using the minimum deviation method have been carried out for prisms of a variety of far ultraviolet optical materials used in the manufacture of Solar Blind Channel (SBC) filters for the HST Advanced Camera for Surveys (ACS). Some of the materials measured are gaining popularity in a variety of high technology applications including high power excimer lasers and advanced microlithography optics operating in a wavelength region where high quality knowledge of optical material properties is sparse. Our measurements are of unusually high accuracy and precision for this wavelength region owing to advanced instrumentation in the large vacuum chamber of the Diffraction Grating Evaluation Facility (DGEF) at Goddard Space Flight Center (GSFC). Index values for CaF2, BaF2, LiF, and far ultraviolet grades of synthetic sapphire and synthetic fused silica are reported and compared with values from the literature.

  10. Far Ultraviolet Refractive Index of Optical Materials for Solar Blind Channel (SBC) Filters for HST Advanced Camera for Surveys

    Science.gov (United States)

    Leviton, Douglas B.; Madison, Timothy J.; Petrone, Peter

    1998-01-01

    Refractive index measurements using the minimum deviation method have been carried out for prisms of a variety of far ultraviolet optical materials used in the manufacture of Solar Blind Channel (SBC) filters for the HST Advanced Camera for Surveys (ACS). Some of the materials measured are gaining popularity in a variety of high technology applications including high power excimer lasers and advanced microlithography optics operating in a wavelength region where high quality knowledge of optical material properties is sparse. Our measurements are of unusually high accuracy and precision for this wavelength region owing to advanced instrumentation in the large vacuum chamber of the Diffraction Grating Evaluation Facility (DGEF) at Goddard Space Flight Center (GSFC). Index values for CaF2, BaF2, LiF, and far ultraviolet grades of synthetic sapphire and synthetic fused silica are reported and compared with values from the literature.

  11. Inorganic UV filters

    Directory of Open Access Journals (Sweden)

    Eloísa Berbel Manaia

    2013-06-01

    Full Text Available Nowadays, concern over skin cancer has been growing more and more, especially in tropical countries where the incidence of UVA/B radiation is higher. The correct use of sunscreen is the most efficient way to prevent the development of this disease. The ingredients of sunscreen can be organic and/or inorganic sun filters. Inorganic filters present some advantages over organic filters, such as photostability, non-irritability and broad spectrum protection. Nevertheless, inorganic filters have a whitening effect in sunscreen formulations owing to the high refractive index, decreasing their esthetic appeal. Many techniques have been developed to overcome this problem and among them, the use of nanotechnology stands out. The estimated amount of nanomaterial in use must increase from 2000 tons in 2004 to a projected 58000 tons in 2020. In this context, this article aims to analyze critically both the different features of the production of inorganic filters (synthesis routes proposed in recent years and the permeability, the safety and other characteristics of the new generation of inorganic filters.

  12. Contactor/filter improvements

    Science.gov (United States)

    Stelman, David

    1989-01-01

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. The housing further includes a gas inlet means, a gas outlet means, and means for moving a body of granular material through the zone. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. Disposed on the upstream face of the filter element is a cover screen which isolates the filter element from contact with the moving granular bed and collects a portion of the particulates so as to form a dust cake having openings small enough to exclude the granular material, yet large enough to receive the dust particles. In one embodiment, the granular material is comprised of prous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses.

  13. Mining dust filter. Bergbaustaubfilter

    Energy Technology Data Exchange (ETDEWEB)

    Igelbuescher, H.; Hoelter, H.

    1988-12-28

    A dust filter for application underground, whose casing is designed as a transportable unit combinable with further casings and fitted with removable filter pockets. These filter pockets have a frame which seals towards the casing and with the lattices on which the filter cloth is stretched and with spacers holding the said lattices at a distance. Each casing as such has inspection ports that are operationable optionally on either side, and clean and crude gas channels on its upper side. The ends of these channels have coupleable head pieces, so that connection is made easy when casings are arranged in a line. Each crude gas channel is connected to the inside of the casing by means of perforations in the floor of said channel, whereas the clean gas channel, for its part, is in connection with the inside of the casing by means of a channel on the head side of the casing. It is thus possible to create a dust filter having practically any desired output by arranging individual modules in line, in which connection each individual module is reliably transportable on the facilities available below ground, as pre-fabricated above ground. Stable support of the sides of the filter cloths is ensured by the lattice that consists of reciprocally cranked longitudinal and transverse wires. 10 figs.

  14. The role of objective facial analysis using FDNA in making diagnoses following whole exome analysis. Report of two patients with mutations in the BAF complex genes.

    Science.gov (United States)

    Gripp, Karen W; Baker, Laura; Telegrafi, Aida; Monaghan, Kristin G

    2016-07-01

    The genetic basis of numerous intellectual disability (ID) syndromes has recently been identified by applying exome analysis on a research or clinical basis. There is significant clinical overlap of biologically related syndromes, as exemplified by Nicolaides-Baraitser (NCBRS) and Coffin-Siris (CSS) syndrome. Both result from mutations affecting the BAF (mSWI/SNF) complex and belong to the growing category of BAFopathies. In addition to the notable clinical overlap between these BAFopathies, heterogeneity exists for patients clinically diagnosed with one of these conditions. We report two teenagers with ID whose molecular diagnosis of a SMARC2A or ARID1B mutation, respectively, was established through clinical exome analysis. Interestingly, using only the information provided in a single clinically obtained facial photograph from each patient, the facial dysmorphology analysis detected similarities to facial patterns associated with NCBRS as the first suggestion for both individuals, followed by CSS as the second highest ranked in the individual with the ARID1B mutation. Had this information been available to the laboratory performing the exome analysis, it could have been utilized during the variant analysis and reporting process, in conjunction with the written summary provided with each test requisition. While the available massive parallel sequencing technology, variant calling and variant interpretation are constantly evolving, clinical information remains critical for this diagnostic process. When trio analysis is not feasible, additional diagnostic tools may become particularly valuable. Facial dysmorphology analysis data may supplement the clinical phenotype summary and provide data independent of the clinician's personal experience and bias. © 2016 Wiley Periodicals, Inc.

  15. Recognition of Relevant ORP, pH, and DO Bending Points in Ammonia Removal from Drinking Water through Online BAF System

    Directory of Open Access Journals (Sweden)

    Hassimi Abu Hasan

    2010-01-01

    Full Text Available This study was undertaken to identify the relevant bending points in ORP, pH, and DO profiles in ammonia removal through online monitoring. A novelty BAF system as newl application for drinking water treatment that equipped with ORP, pH, DO NH4 + and NO3 − sensors was used. Two types of polluted drinking water strength (low and high strength with various NH4 + concentrations and aeration flow were treated at a fixed-time reaction of 24 h. Experiments were conducted at four track studies (TS of TS1 (NH4 += 50 mg/L, aeration = 0.3 L/min, TS2 (NH4 + = 100 mg/L, aeration = 2.0 L/min, TS3 (NH4 += 100 mg/L, no aeration and TS4 (NH4 += 10 mg/L, aeration = 0.1 L/min. The results showed that the removal of NH4 + was more than 95% for TS1, TS2, and TS4. From the online monitoring performances, DO elbow and ammonia valley appeared in ORP and pH profiles, respectively. Similarly, new positive plateaus were observed in DO, indicating that the nitrifiers stopped to consume the DO after NH4 + was completely removed. Hence, based on the bending points, the aeration system is possible to be automatically stopped just after DO elbow and ammonia valley appears in order to save the energy consumption and to shorten the time demands for the drinking water treatment process.

  16. LMFBR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Takeshi; Iida, Masaaki; Moriki, Yasuyuki

    1994-10-18

    A reactor core is divided into a plurality of coolants flowrate regions, and electromagnetic pumps exclusively used for each of the flowrate regions are disposed to distribute coolants flowrates in the reactor core. Further, the flowrate of each of the electromagnetic pumps is automatically controlled depending on signals from a temperature detector disposed at the exit of the reactor core, so that the flowrate of the region can be controlled optimally depending on the burning of reactor core fuels. Then, the electromagnetic pumps disposed for every divided region are controlled respectively, so that the coolants flowrate distribution suitable to each of the regions can be attained. Margin for fuel design is decreased, fuels are used effectively, as well as an operation efficiency can be improved. Moreover, since the electromagnetic pump has less flow resistance compared with a mechanical type pump, and flow resistance of the reactor core flowrate control mechanism is eliminated, greater circulating flowrate can be ensured after occurrence of accident in a natural convection using a buoyancy of coolants utilizable for after-heat removal as a driving force. (N.H.).

  17. Circulating and plateout activity program for gas-cooled reactors with arbitrary radioactive chains

    Energy Technology Data Exchange (ETDEWEB)

    Apperson, C.E. Jr.

    1978-03-01

    A time-dependent method for estimating the fuel body, circulating, plateout, and filter inventory of a high temperature gas-cooled reactor (HTGR) during normal operation is discussed. The primary coolant model accounts for the source, buildup, decay, and cleanup of isotopes that are gas borne inside the prestressed concrete reactor vessel (PCRV). This method has been implemented in the SUVIUS computer program that is described in detail.

  18. Reactor Structural Materials: Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Chaouadi, R

    2000-07-01

    The objectives of SCK-CEN's R and D programme on Rector Pressure Vessel (RPV) Steels are:(1) to complete the fracture toughness data bank of various reactor pressure vessel steels by using precracked Charpy specimens that were tested statically as well as dynamically; (2) to implement the enhanced surveillance approach in a user-friendly software; (3) to improve the existing reconstitution technology by reducing the input energy (short cycle welding) and modifying the stud geometry. Progress and achievements in 1999 are reported.

  19. Operation of Reactor

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    3.1 Annual Report of SPR Operation Chu Shaochu Having overseen by National Nuclear Safety Administration and specialists, the reactor restarted up successfully after Safety renovation on April 16, 1996. In August 1996 the normal operation of SPR was approved by the authorities of Naitonal Nuclear Safety Administration. 1 Operation status In 1996, the reactor operated safely for 40 d and the energy released was about 137.3 MW·d. The operation status of SPR is shown in table 1. The reactor started up to higher power (power more than 1 MW) and lower power (for physics experiments) 4 times and 14 times respectively. Measurement of control rod efficiency and other measurement tasks were 2 times and 5 times respectively.

  20. Nuclear Rocket Engine Reactor

    CERN Document Server

    Lanin, Anatoly

    2013-01-01

    The development of a nuclear rocket engine reactor (NRER ) is presented in this book. The working capacity of an active zone NRER under mechanical and thermal load, intensive neutron fluxes, high energy generation (up to 30 MBT/l) in a working medium (hydrogen) at temperatures up to 3100 K is displayed. Design principles and bearing capacity of reactors area discussed on the basis of simulation experiments and test data of a prototype reactor. Property data of dense constructional, porous thermal insulating and fuel materials like carbide and uranium carbide compounds in the temperatures interval 300 - 3000 K are presented. Technological aspects of strength and thermal strength resistance of materials are considered. The design procedure of possible emergency processes in the NRER is developed and risks for their origination are evaluated. Prospects of the NRER development for pilotless space devices and piloted interplanetary ships are viewed.

  1. Thermionic Reactor Design Studies

    Energy Technology Data Exchange (ETDEWEB)

    Schock, Alfred

    1994-08-01

    Paper presented at the 29th IECEC in Monterey, CA in August 1994. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their (thermionic reactor) performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling.

  2. An Overview of Reactor Concepts, a Survey of Reactor Designs.

    Science.gov (United States)

    1985-02-01

    Public Affairs Office and is releasaole to the National Technical Information Services (NTIS). At NTIS, it will be available to the general public...Reactors that use deu- terium (heavy water) as a coolant can use natural uranium as a fuel. The * Canadian reactor, CANDU , utilizes this concept...reactor core at the top and discharged at the Dotton while the reactor is in operation. The discharged fuel can then b inspected to see if it can De used

  3. Oscillatory flow chemical reactors

    Directory of Open Access Journals (Sweden)

    Slavnić Danijela S.

    2014-01-01

    Full Text Available Global market competition, increase in energy and other production costs, demands for high quality products and reduction of waste are forcing pharmaceutical, fine chemicals and biochemical industries, to search for radical solutions. One of the most effective ways to improve the overall production (cost reduction and better control of reactions is a transition from batch to continuous processes. However, the reactions of interests for the mentioned industry sectors are often slow, thus continuous tubular reactors would be impractically long for flow regimes which provide sufficient heat and mass transfer and narrow residence time distribution. The oscillatory flow reactors (OFR are newer type of tube reactors which can offer solution by providing continuous operation with approximately plug flow pattern, low shear stress rates and enhanced mass and heat transfer. These benefits are the result of very good mixing in OFR achieved by vortex generation. OFR consists of cylindrical tube containing equally spaced orifice baffles. Fluid oscillations are superimposed on a net (laminar flow. Eddies are generated when oscillating fluid collides with baffles and passes through orifices. Generation and propagation of vortices create uniform mixing in each reactor cavity (between baffles, providing an overall flow pattern which is close to plug flow. Oscillations can be created by direct action of a piston or a diaphragm on fluid (or alternatively on baffles. This article provides an overview of oscillatory flow reactor technology, its operating principles and basic design and scale - up characteristics. Further, the article reviews the key research findings in heat and mass transfer, shear stress, residence time distribution in OFR, presenting their advantages over the conventional reactors. Finally, relevant process intensification examples from pharmaceutical, polymer and biofuels industries are presented.

  4. Fractional vortex dipole phase filter

    Science.gov (United States)

    Sharma, Manoj Kumar; Joseph, Joby; Senthilkumaran, Paramasivam

    2014-10-01

    In spatial filtering experiments, the use of vortex phase filters plays an important role in realizing isotropic edge enhancement. In this paper, we report the use of a vortex dipole phase filter in spatial filtering. A dipole made of fractional vortices is used, and its filtering characteristics are studied. It is observed that the filter performance can be tuned by varying the distance of separation between the vortices of the dipole to achieve better contrast and output noise suppression, and when this distance tends to infinity, the filter performs like a 1-D Hilbert mask. Experimental and simulation results are presented.

  5. Choosing and using astronomical filters

    CERN Document Server

    Griffiths, Martin

    2014-01-01

    As a casual read through any of the major amateur astronomical magazines will demonstrate, there are filters available for all aspects of optical astronomy. This book provides a ready resource on the use of the following filters, among others, for observational astronomy or for imaging: Light pollution filters Planetary filters Solar filters Neutral density filters for Moon observation Deep-sky filters, for such objects as galaxies, nebulae and more Deep-sky objects can be imaged in much greater detail than was possible many years ago. Amateur astronomers can take

  6. Reactor Dosimetry State of the Art 2008

    Science.gov (United States)

    Voorbraak, Wim; Debarberis, Luigi; D'Hondt, Pierre; Wagemans, Jan

    2009-08-01

    data, damage correlations. Two-dimensional mapping of the calculated fission power for the full-size fuel plate experiment irradiated in the advanced test reactor / G. S. Chang and M. A. Lillo. The radiation safety information computational center: a resource for reactor dosimetry software and nuclear data / B. L. Kirk. Irradiated xenon isotopic ratio measurement for failed fuel detection and location in fast reactor / C. Ito, T. Iguchi and H. Harano. Characterization of dosimetry of the BMRR horizontal thimble tubes and broad beam facility / J.-P. Hu, R. N. Reciniello and N. E. Holden. 2007 nuclear data review / N. E. Holden. Further dosimetry studies at the Rhode Island nuclear science / R. N. Reciniello ... [et al.]. Characterization of neutron fields in the experimental fast reactor Joyo MK-III core / S. Maeda ... [et al.]. Measuring [symbol]Li(n, t) and [symbol]B(n, [symbol]) cross sections using the NIST alpha-gamma apparatus / M. S. Dewey ... [et al.]. Improvement of neutron/gamma field evaluation for restart of JMTR / Y. Nagao ... [et al.]. Monitoring of the irradiated neutron fluence in the neutron transmutation doping process of HANARO / M.-S. Kim and S.-J. Park.Training reactor VR-l neutron spectrum determination / M. Vins, A. Kolros and K. Katovsky. Differential cross sections for gamma-ray production by 14 MeV neutrons on iron and bismuth / V. M. Bondar ... [et al.]. The measurements of the differential elastic neutron cross-sections of carbon for energies from 2 to 133 ke V / O. Gritzay ... [et al.]. Determination of neutron spectrum by the dosimetry foil method up to 35 Me V / S. P. Simakov ... [et al.]. Extension of the BGL broad group cross section library / D. Kirilova, S. Belousov and Kr. Ilieva. Measurements of neutron capture cross-section for tantalum at the neutron filtered beams / O. Gritzayand V. Libman. Measurements of microscopic data at GELINA in support of dosimetry / S. Kopecky ... [et al.]. Nuclide guide and international chart of

  7. An IIR median hybrid filter

    Science.gov (United States)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  8. Two-zone pupil filters

    Science.gov (United States)

    Sheppard, Colin J. R.; Campos, Juan; Escalera, Juan C.; Ledesma, Silvia

    2008-03-01

    The performance of pupil filters consisting of two zones each of constant complex amplitude transmittance is investigated. For filters where the transmittance is real, different classes of potentially useful filter are identified and optimized. These include leaky filters with an inner zone of low amplitude transmittance, pure phase filters with phase change of π, and equal area filters. The first of these minimizes the relative power in the outer rings for a given axial resolution, the second maximizes the Strehl ratio for a given transverse resolution, and the third minimizes the relative power in the outer rings for a given transverse resolution. Complex filters can give an axially shifted maximum in intensity: the performance parameters calculated relative to the true focus are investigated for some different classes of filter, but filters with phase change not equal to π are found to give inferior performance to the real value filters.

  9. Remotely serviced filter and housing

    Science.gov (United States)

    Ross, M.J.; Zaladonis, L.A.

    1987-07-22

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

  10. Perspectives on reactor safety

    Energy Technology Data Exchange (ETDEWEB)

    Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States)

    1994-03-01

    The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

  11. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2002-04-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

  12. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on fusion reactor materials includes: (1) the study of the mechanical behaviour of structural materials under neutron irradiation (including steels, inconel, molybdenum, chromium); (2) the determination and modelling of the characteristics of irradiated first wall materials such as beryllium; (3) the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; (4) the study of the dismantling and waste disposal strategy for fusion reactors.; (5) a feasibility study for the testing of blanket modules under neutron radiation. Main achievements in these topical areas in the year 1999 are summarised.

  13. Multilevel Mixture Kalman Filter

    Directory of Open Access Journals (Sweden)

    Xiaodong Wang

    2004-11-01

    Full Text Available The mixture Kalman filter is a general sequential Monte Carlo technique for conditional linear dynamic systems. It generates samples of some indicator variables recursively based on sequential importance sampling (SIS and integrates out the linear and Gaussian state variables conditioned on these indicators. Due to the marginalization process, the complexity of the mixture Kalman filter is quite high if the dimension of the indicator sampling space is high. In this paper, we address this difficulty by developing a new Monte Carlo sampling scheme, namely, the multilevel mixture Kalman filter. The basic idea is to make use of the multilevel or hierarchical structure of the space from which the indicator variables take values. That is, we draw samples in a multilevel fashion, beginning with sampling from the highest-level sampling space and then draw samples from the associate subspace of the newly drawn samples in a lower-level sampling space, until reaching the desired sampling space. Such a multilevel sampling scheme can be used in conjunction with the delayed estimation method, such as the delayed-sample method, resulting in delayed multilevel mixture Kalman filter. Examples in wireless communication, specifically the coherent and noncoherent 16-QAM over flat-fading channels, are provided to demonstrate the performance of the proposed multilevel mixture Kalman filter.

  14. Multilevel ensemble Kalman filtering

    KAUST Repository

    Hoel, Haakon

    2016-01-08

    The ensemble Kalman filter (EnKF) is a sequential filtering method that uses an ensemble of particle paths to estimate the means and covariances required by the Kalman filter by the use of sample moments, i.e., the Monte Carlo method. EnKF is often both robust and efficient, but its performance may suffer in settings where the computational cost of accurate simulations of particles is high. The multilevel Monte Carlo method (MLMC) is an extension of classical Monte Carlo methods which by sampling stochastic realizations on a hierarchy of resolutions may reduce the computational cost of moment approximations by orders of magnitude. In this work we have combined the ideas of MLMC and EnKF to construct the multilevel ensemble Kalman filter (MLEnKF) for the setting of finite dimensional state and observation spaces. The main ideas of this method is to compute particle paths on a hierarchy of resolutions and to apply multilevel estimators on the ensemble hierarchy of particles to compute Kalman filter means and covariances. Theoretical results and a numerical study of the performance gains of MLEnKF over EnKF will be presented. Some ideas on the extension of MLEnKF to settings with infinite dimensional state spaces will also be presented.

  15. NOTCH FILTER USING SIMULATED INDUCTOR

    Directory of Open Access Journals (Sweden)

    D.SUSAN,

    2011-06-01

    Full Text Available The design of analog filters at low frequencies is not possible because the size of inductors becomes very large. In such cases, the simulated inductors using operational amplifiers are used. This paper deals with the implementation of notch filter using band pass filter which uses simulated inductor where the direct implementation of notch filter using simulated inductor is not possible because of floating inductor. The design of notch filter and the simulation done in PSPICE is presented.

  16. Improved directional-distance filter

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper proposes a new spatial-distance weighting function.By combining the weighting function and the traditional directional-distance filter (DDF) in a novel way,a new vector filter-the adaptive distance-weighted directional-distance filter (ADWDDF)-is presented.The experimental results show that the proposed solution provides better filtering performance and preserves better image chromaticity and edge or detail information compared with the traditional DDF and some other typical vector filters.

  17. DOE HEPA filter test program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This standard establishes essential elements of a Department of Energy (DOE) program for testing HEPA filters to be installed in DOE nuclear facilities or used in DOE-contracted activities. A key element is the testing of HEPA filters for performance at a DOE Filter Test Facility (FTF) prior to installation. Other key elements are (1) providing for a DOE HEPA filter procurement program, and (2) verifying that HEPA filters to be installed in nuclear facilities appear on a Qualified Products List (QPL).

  18. High Flux Isotope Reactor (HFIR)

    Data.gov (United States)

    Federal Laboratory Consortium — The HFIR at Oak Ridge National Laboratory is a light-water cooled and moderated reactor that is the United States’ highest flux reactor-based neutron source. HFIR...

  19. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

    1989-12-01

    The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

  20. Reactor operation safety information document

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

  1. Particle Filter-Based Recursive Data Fusion With Sensor Indexing for Large Core Neutron Flux Estimation

    Science.gov (United States)

    Tamboli, Prakash Kumar; Duttagupta, Siddhartha P.; Roy, Kallol

    2017-06-01

    We introduce a sequential importance sampling particle filter (PF)-based multisensor multivariate nonlinear estimator for estimating the in-core neutron flux distribution for pressurized heavy water reactor core. Many critical applications such as reactor protection and control rely upon neutron flux information, and thus their reliability is of utmost importance. The point kinetic model based on neutron transport conveniently explains the dynamics of nuclear reactor. The neutron flux in the large core loosely coupled reactor is sensed by multiple sensors measuring point fluxes located at various locations inside the reactor core. The flux values are coupled to each other through diffusion equation. The coupling facilitates redundancy in the information. It is shown that multiple independent data about the localized flux can be fused together to enhance the estimation accuracy to a great extent. We also propose the sensor anomaly handling feature in multisensor PF to maintain the estimation process even when the sensor is faulty or generates data anomaly.

  2. Stack filter classifiers

    Energy Technology Data Exchange (ETDEWEB)

    Porter, Reid B [Los Alamos National Laboratory; Hush, Don [Los Alamos National Laboratory

    2009-01-01

    Just as linear models generalize the sample mean and weighted average, weighted order statistic models generalize the sample median and weighted median. This analogy can be continued informally to generalized additive modeels in the case of the mean, and Stack Filters in the case of the median. Both of these model classes have been extensively studied for signal and image processing but it is surprising to find that for pattern classification, their treatment has been significantly one sided. Generalized additive models are now a major tool in pattern classification and many different learning algorithms have been developed to fit model parameters to finite data. However Stack Filters remain largely confined to signal and image processing and learning algorithms for classification are yet to be seen. This paper is a step towards Stack Filter Classifiers and it shows that the approach is interesting from both a theoretical and a practical perspective.

  3. Automated electronic filter design

    CERN Document Server

    Banerjee, Amal

    2017-01-01

    This book describes a novel, efficient and powerful scheme for designing and evaluating the performance characteristics of any electronic filter designed with predefined specifications. The author explains techniques that enable readers to eliminate complicated manual, and thus error-prone and time-consuming, steps of traditional design techniques. The presentation includes demonstration of efficient automation, using an ANSI C language program, which accepts any filter design specification (e.g. Chebyschev low-pass filter, cut-off frequency, pass-band ripple etc.) as input and generates as output a SPICE(Simulation Program with Integrated Circuit Emphasis) format netlist. Readers then can use this netlist to run simulations with any version of the popular SPICE simulator, increasing accuracy of the final results, without violating any of the key principles of the traditional design scheme.

  4. Adaptive digital filters

    CERN Document Server

    Kovačević, Branko; Milosavljević, Milan

    2013-01-01

    “Adaptive Digital Filters” presents an important discipline applied to the domain of speech processing. The book first makes the reader acquainted with the basic terms of filtering and adaptive filtering, before introducing the field of advanced modern algorithms, some of which are contributed by the authors themselves. Working in the field of adaptive signal processing requires the use of complex mathematical tools. The book offers a detailed presentation of the mathematical models that is clear and consistent, an approach that allows everyone with a college level of mathematics knowledge to successfully follow the mathematical derivations and descriptions of algorithms.   The algorithms are presented in flow charts, which facilitates their practical implementation. The book presents many experimental results and treats the aspects of practical application of adaptive filtering in real systems, making it a valuable resource for both undergraduate and graduate students, and for all others interested in m...

  5. REACTOR FUEL ELEMENTS TESTING CONTAINER

    Science.gov (United States)

    Whitham, G.K.; Smith, R.R.

    1963-01-15

    This patent shows a method for detecting leaks in jacketed fuel elements. The element is placed in a sealed tank within a nuclear reactor, and, while the reactor operates, the element is sparged with gas. The gas is then led outside the reactor and monitored for radioactive Xe or Kr. (AEC)

  6. Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. [eds.

    1992-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  7. WATER BOILER REACTOR

    Science.gov (United States)

    King, L.D.P.

    1960-11-22

    As its name implies, this reactor utilizes an aqueous solution of a fissionable element salt, and is also conventional in that it contains a heat exchanger cooling coil immersed in the fuel. Its novelty lies in the utilization of a cylindrical reactor vessel to provide a critical region having a large and constant interface with a supernatant vapor region, and the use of a hollow sleeve coolant member suspended from the cover assembly in coaxial relation with the reactor vessel. Cool water is circulated inside this hollow coolant member, and a gap between its outer wall and the reactor vessel is used to carry off radiolytic gases for recombination in an external catalyst chamber. The central passage of the coolant member defines a reflux condenser passage into which the externally recombined gases are returned and condensed. The large and constant interface between fuel solution and vapor region prevents the formation of large bubbles and minimizes the amount of fuel salt carried off by water vapor, thus making possible higher flux densities, specific powers and power densities.

  8. MULTISTAGE FLUIDIZED BED REACTOR

    Science.gov (United States)

    Jonke, A.A.; Graae, J.E.A.; Levitz, N.M.

    1959-11-01

    A multistage fluidized bed reactor is described in which each of a number of stages is arranged with respect to an associated baffle so that a fluidizing gas flows upward and a granular solid downward through the stages and baffles, whereas the granular solid stopsflowing downward when the flow of fluidizing gas is shut off.

  9. Fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

  10. Integral Fast Reactor concept

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.

    1986-01-01

    The Integral Fast Reactor (IFR) is an innovative LMR concept, being developed at Argonne National Laboratory, that fully exploits the inherent properties of liquid metal cooling and metallic fuel to achieve breakthroughs in economics and inherent safety. This paper describes key features and potential advantages of the IFR concept, technology development status, fuel cycle economics potential, and future development path.

  11. The First Reactor.

    Science.gov (United States)

    Department of Energy, Washington, DC.

    On December 2, 1942, in a racquet court underneath the West Stands of Stagg Field at the University of Chicago, a team of scientists led by Enrico Fermi created the first controlled, self-sustaining nuclear chain reaction. This updated and revised story of the first reactor (or "pile") is based on postwar interviews (as told to Corbin…

  12. Thermal Reactor Safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Information is presented concerning fire risk and protection; transient thermal-hydraulic analysis and experiments; class 9 accidents and containment; diagnostics and in-service inspection; risk and cost comparison of alternative electric energy sources; fuel behavior and experiments on core cooling in LOCAs; reactor event reporting analysis; equipment qualification; post facts analysis of the TMI-2 accident; and computational methods.

  13. Chromatographic and Related Reactors.

    Science.gov (United States)

    1988-01-07

    special information about effects of surface heteroge- neity in the methanation reaction. Studies of an efficient multicolumn assembly for measuring...of organic basic catalysts such as pyridine and 4-methylpicoline. It was demonstrated that the chromatographic reactor gave special information about...Programmed Reaction to obtain special information about surface heterogeneity in the methanation reaction. Advantages of stopped flow over steady state

  14. New concepts for shaftless recycle reactors

    Energy Technology Data Exchange (ETDEWEB)

    Berty, J.M.; Berty, I.J.

    1987-01-01

    Berty Reaction Engineers, Ltd. (BREL) is developing two new laboratory recycle reactors, the ROTOBERTY and the TURBOBERTY. These new reactors are basically improved versions of the original Berty reactor. To understand why the reactors have the features that they do, it is first necessary to briefly review laboratory reactors in general and specifically the original Berty reactor.

  15. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  16. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  17. Brazilian multipurpose reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Brazilian Multipurpose Reactor (RMB) Project is an action of the Federal Government, through the Ministry of Science Technology and Innovation (MCTI) and has its execution under the responsibility of the Brazilian National Nuclear Energy Commission (CNEN). Within the CNEN, the project is coordinated by the Research and Development Directorate (DPD) and developed through research units of this board: Institute of Nuclear Energy Research (IPEN); Nuclear Engineering Institute (IEN); Centre for Development of Nuclear Technology (CDTN); Regional Center of Nuclear Sciences (CRCN-NE); and Institute of Radiation Protection and Dosimetry (IRD). The Navy Technological Center in Sao Paulo (CTMSP) and also the participation of other research centers, universities, laboratories and companies in the nuclear sector are important and strategic partnerships. The conceptual design and the safety analysis of the reactor and main facilities, related to nuclear and environmental licensing, are performed by technicians of the research units of DPD / CNEN. The basic design was contracted to engineering companies as INTERTHECNE from Brazil and INVAP from Argentine. The research units from DPD/CNEN are also responsible for the design verification on all engineering documents developed by the contracted companies. The construction and installation should be performed by specific national companies and international partnerships. The Nuclear Reactor RMB will be a open pool type reactor with maximum power of 30 MW and have the OPAL nuclear reactor of 20 MW, built in Australia and designed by INVAP, as reference. The RMB reactor core will have a 5x5 configuration, consisting of 23 elements fuels (EC) of U{sub 3}Si{sub 2} dispersion-type Al having a density of up to 3.5 gU/cm{sup 3} and enrichment of 19.75% by weight of {sup 23{sup 5}}U. Two positions will be available in the core for materials irradiation devices. The main objectives of the RMB Reactor and the other nuclear and radioactive

  18. The clinically-tested S1P receptor agonists, FTY720 and BAF312, demonstrate subtype-specific bradycardia (S1P₁ and hypertension (S1P₃ in rat.

    Directory of Open Access Journals (Sweden)

    Ryan M Fryer

    Full Text Available Sphingosine-1-phospate (S1P and S1P receptor agonists elicit mechanism-based effects on cardiovascular function in vivo. Indeed, FTY720 (non-selective S1P(X receptor agonist produces modest hypertension in patients (2-3 mmHg in 1-yr trial as well as acute bradycardia independent of changes in blood pressure. However, the precise receptor subtypes responsible is controversial, likely dependent upon the cardiovascular response in question (e.g. bradycardia, hypertension, and perhaps even species-dependent since functional differences in rodent, rabbit, and human have been suggested. Thus, we characterized the S1P receptor subtype specificity for each compound in vitro and, in vivo, the cardiovascular effects of FTY720 and the more selective S1P₁,₅ agonist, BAF312, were tested during acute i.v. infusion in anesthetized rats and after oral administration for 10 days in telemetry-instrumented conscious rats. Acute i.v. infusion of FTY720 (0.1, 0.3, 1.0 mg/kg/20 min or BAF312 (0.5, 1.5, 5.0 mg/kg/20 min elicited acute bradycardia in anesthetized rats demonstrating an S1P₁ mediated mechanism-of-action. However, while FTY720 (0.5, 1.5, 5.0 mg/kg/d elicited dose-dependent hypertension after multiple days of oral administration in rat at clinically relevant plasma concentrations (24-hr mean blood pressure = 8.4, 12.8, 16.2 mmHg above baseline vs. 3 mmHg in vehicle controls, BAF312 (0.3, 3.0, 30.0 mg/kg/d had no significant effect on blood pressure at any dose tested suggesting that hypertension produced by FTY720 is mediated S1P₃ receptors. In summary, in vitro selectivity results in combination with studies performed in anesthetized and conscious rats administered two clinically tested S1P agonists, FTY720 or BAF312, suggest that S1P₁ receptors mediate bradycardia while hypertension is mediated by S1P₃ receptor activation.

  19. Application of Ozone-BAF Process in Printing and Dyeing Wastewater Reuse%臭氧-BAF技术在印染废水回用处理中的应用

    Institute of Scientific and Technical Information of China (English)

    梁晶

    2014-01-01

    对臭氧-曝气生物滤池(BAF)技术在印染废水中的应用进行了研究,结果表明,臭氧投加量为15 mg/L,臭氧与废水的接触时间为60 min时,废水的B/C由0.1提高到0.23左右,印染废水的生化性得到较大的提高;同时,当BAF的停留时间达到3 h时,出水的CODcr为48.22 mg/L、BOD5为9.54 mg/L、SS为8.17 mg/L、色度为18时,出水水质达到相关标准。%To advanced treating and then reusing the printing and dyeing wastewater effectively, a bridge technology of Ozone- BAF is adopted in this article. During the Ozone treatment process, the quality, espe-cially the biodegradability of the wastewater is analyzed with two influence factors, the Ozone dosage, and the contact time between the Ozone and the wastewater. The test results show that B/Cin the wastewater increases from0.1to0.23, when the Ozone dosage is15mg/L and the contact time is60min. Thus, the biodegradability of the wastewater has been improved. After that, the wastewater goes to the BAF process. The influence of hy-draulic retention time in the BAF to the water quality is studied. The test results, CODcr is 48.22mg/L, BOD5is9.54mg/L, SSis8.17mg/L and Chromaticity is 18 when the hydraulic retention time in the BAF is 3h, show the treated wastewater satisfies the relevant standards and can be reused.

  20. 不同填料组合的曝气生物滤池前置反硝化工艺特性的比较研究%Comparitive study on two biological aerated filter processes with different media combination for pre-denitrification/nitrification of grey water

    Institute of Scientific and Technical Information of China (English)

    彭晓兰; 陈吕军

    2012-01-01

    The performance and characteristics of two separated pre-denitrification processes using biological aerated filter(BAF),ceramic-zeolite BAF(C-Z BAF),and zeolite-ceramic BAF(Z-C BAF),were investigated and compared under various HRTs,reflux ratios and air-liquid ratios for treating grey water.The optimized HRT,air-liquid ratio and reflux ratio of C-Z BAF and Z-C BAF were 1.5 h,5∶ 1,1∶ 1 and 1.5 h,5∶ 1,2∶ 1,respectively,while influent volumetric loading rates for COD,NH3-N and TN were 0.72~5.97,0.09~0.60,and 0.11~0.78 kg/m3·d.Under the optimal conditions,the mean removal efficiency of COD,NH3-N,and TN were 94.7%,99.0% and 62.2%,respectively for the C-Z BAF;and 93.2%,99.5%,and 70.1%,separately for the Z-C BAF.The results of one-way ANOVA showed that HRT had significant effect on the removal of COD,NH3-N and TN of both processes;reflux ratio had significant effect on the TN removal of Z-C BAF while had no significant effect on that of C-Z BAF.The profile of pollutants along the flow path in the two BAF systems indicated that the COD was oxidized in the anoxic filter and the media of 0~0.3 m in oxic filter;the nitrification mainly happened in the media of 0~0.6 m in oxic filter and the Z-C BAF had higher nitrification rate than C-Z BAF;Z-C BAF had remarkable simultaneous nitrification and de-nitrification phenomenon,thus the de-nitrification efficiency of Z-C BAF was better than that of C-Z BAF.%研究了2组不同填料组合的前置反硝化曝气生物滤池(BAF)脱氮工艺:陶粒-沸石工艺(C-Z BAF)和沸石-陶粒工艺(Z-C BAF),比较二者在不同的水力停留时间(HRT)、气水比和回流比条件下的工艺特性。当进水COD、氨氮和TN容积负荷分别为0.72~5.97、0.09~0.60和0.11~0.78 kg/(m3.d)时,C-Z BAF和Z-C BAF的最佳HRT、气水比和回流比分别为1.5 h、5∶1、1∶1和1.5 h、5∶1、2∶1,相应COD、氨氮和TN的平均去除率分别为94.7%、99.0%、62.2%和93.2%、99.5%、70

  1. Modeling Chemical Reactors I: Quiescent Reactors

    CERN Document Server

    Michoski, C E; Schmitz, P G

    2010-01-01

    We introduce a fully generalized quiescent chemical reactor system in arbitrary space $\\vdim =1,2$ or 3, with $n\\in\\mathbb{N}$ chemical constituents $\\alpha_{i}$, where the character of the numerical solution is strongly determined by the relative scaling between the local reactivity of species $\\alpha_{i}$ and the local functional diffusivity $\\mathscr{D}_{ij}(\\alpha)$ of the reaction mixture. We develop an operator time-splitting predictor multi-corrector RK--LDG scheme, and utilize $hp$-adaptivity relying only on the entropy $\\mathscr{S}_{\\mathfrak{R}}$ of the reactive system $\\mathfrak{R}$. This condition preserves these bounded nonlinear entropy functionals as a necessarily enforced stability condition on the coupled system. We apply this scheme to a number of application problems in chemical kinetics; including a difficult classical problem arising in nonequilibrium thermodynamics known as the Belousov-Zhabotinskii reaction where we utilize a concentration-dependent diffusivity tensor $\\mathscr{D}_{ij}(...

  2. Alternative approaches to fusion. [reactor design and reactor physics for Tokamak fusion reactors

    Science.gov (United States)

    Roth, R. J.

    1976-01-01

    The limitations of the Tokamak fusion reactor concept are discussed and various other fusion reactor concepts are considered that employ the containment of thermonuclear plasmas by magnetic fields (i.e., stellarators). Progress made in the containment of plasmas in toroidal devices is reported. Reactor design concepts are illustrated. The possibility of using fusion reactors as a power source in interplanetary space travel and electric power plants is briefly examined.

  3. Statistically-Efficient Filtering in Impulsive Environments: Weighted Myriad Filters

    Directory of Open Access Journals (Sweden)

    Gonzalez Juan G

    2002-01-01

    Full Text Available Linear filtering theory has been largely motivated by the characteristics of Gaussian signals. In the same manner, the proposed Myriad Filtering methods are motivated by the need for a flexible filter class with high statistical efficiency in non-Gaussian impulsive environments that can appear in practice. Myriad filters have a solid theoretical basis, are inherently more powerful than median filters, and are very general, subsuming traditional linear FIR filters. The foundation of the proposed filtering algorithms lies in the definition of the myriad as a tunable estimator of location derived from the theory of robust statistics. We prove several fundamental properties of this estimator and show its optimality in practical impulsive models such as the -stable and generalized- . We then extend the myriad estimation framework to allow the use of weights. In the same way as linear FIR filters become a powerful generalization of the mean filter, filters based on running myriads reach all of their potential when a weighting scheme is utilized. We derive the "normal" equations for the optimal myriad filter, and introduce a suboptimal methodology for filter tuning and design. The strong potential of myriad filtering and estimation in impulsive environments is illustrated with several examples.

  4. Reactor monitoring using antineutrino detectors

    Science.gov (United States)

    Bowden, N. S.

    2011-08-01

    Nuclear reactors have served as the antineutrino source for many fundamental physics experiments. The techniques developed by these experiments make it possible to use these weakly interacting particles for a practical purpose. The large flux of antineutrinos that leaves a reactor carries information about two quantities of interest for safeguards: the reactor power and fissile inventory. Measurements made with antineutrino detectors could therefore offer an alternative means for verifying the power history and fissile inventory of a reactor as part of International Atomic Energy Agency (IAEA) and/or other reactor safeguards regimes. Several efforts to develop this monitoring technique are underway worldwide.

  5. Reactor vessel support system. [LMFBR

    Science.gov (United States)

    Golden, M.P.; Holley, J.C.

    1980-05-09

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  6. Development of the nested fiber filter

    Science.gov (United States)

    Litt, R. D.; Conkle, H. N.; Raghavan, J. K.

    Battelle has tested the Nested Fiber Filter (NFF) as a particulate control device for high temperature, high-pressure (HTHP) applications. Battelle funded initial bench-scale tests which were the basis for patents and a concept applying the NFF. Subsequent parametric tests in a 6-inch diameter reactor established excellent particulate capture performance, greater than 99 percent, for conditions up to 1600 F and 6 atmospheres. Effective cleaning/regeneration of the NFF was achieved in the 6-inch scale with acoustic and mechanical vibration. A pulse combustor was tested in an integrated NFF arrangement because of compatibility with the HTBP conditions. This arrangement provided the basis for larger scale tests under the subject contract. A 6-sq ft test module was designed and installed with an existing fluidized bed combustor for additional development and testing.

  7. Domain wall filters

    CERN Document Server

    Bär, O; Neuberger, H; Witzel, O; Baer, Oliver; Narayanan, Rajamani; Neuberger, Herbert; Witzel, Oliver

    2007-01-01

    We propose using the extra dimension separating the domain walls carrying lattice quarks of opposite handedness to gradually filter out the ultraviolet fluctuations of the gauge fields that are felt by the fermionic excitations living in the bulk. This generalization of the homogeneous domain wall construction has some theoretical features that seem nontrivial.

  8. Fast Anisotropic Gauss Filters

    NARCIS (Netherlands)

    Geusebroek, J.M.; Smeulders, A.W.M.; van de Weijer, J.

    2003-01-01

    We derive the decomposition of the anisotropic Gaussian in a one dimensional Gauss filter in the x-direction phi. So also the anisotropic Gaussian can be decomposed by dimension. This appears to be extremely efficient from a computing perspective. An implementation scheme for normal covolution and f

  9. Ceramic HEPA Filter Program

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

    2012-04-30

    Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

  10. Magnetic-Optical Filter

    CERN Document Server

    Formicola, I; Pinto, C; Cerulo, P

    2007-01-01

    Magnetic-Optical Filter (MOF) is an instrument suited for high precision spectral measurements for its peculiar characteristics. It is employed in Astronomy and in the field of the telecommunications (it is called FADOF there). In this brief paper we summarize its fundamental structure and functioning.

  11. Enhanced Optical Filter Design

    CERN Document Server

    Cushing, David

    2011-01-01

    This book serves as a supplement to the classic texts by Angus Macleod and Philip Baumeister, taking an intuitive approach to the enhancement of optical coating (or filter) performance. Drawing from 40 years of experience in thin film design, Cushing introduces the basics of thin films, the commonly used materials and their deposition, the major coatings and their applications, and improvement methods for each.

  12. Ozone decomposing filter

    Science.gov (United States)

    Simandl, Ronald F.; Brown, John D.; Whinnery, Jr., LeRoy L.

    1999-01-01

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  13. Spot- Zombie Filtering System

    Directory of Open Access Journals (Sweden)

    Arathy Rajagopal

    2014-01-01

    Full Text Available A major security challenge on the Internet is the existence of the large number of compromised machines. Such machines have been increasingly used to launch various security attacks including spamming and spreading malware, DDoS, and identity theft. These compromised machines are called “Zombies”. In general E-mail applications and providers uses spam filters to filter the spam messages. Spam filtering is a technique for discriminating the genuine message from the spam messages. The attackers send the spam messages to the targeted machine by exalting the filters, which causes the increase in false positives and false negatives. We develop an effective spam zombie detection system named SPOT by monitoring outgoing messages of a network. SPOT focuses on the number of outgoing messages that are originated or forwarded by each computer on a network to identify the presence of Zombies. SPOT is designed based on a powerful statistical tool called Sequential Probability Ratio Test, which has bounded false positive and false negative error rates.

  14. Digital hum filtering

    Science.gov (United States)

    Knapp, R.W.; Anderson, N.L.

    1994-01-01

    Data may be overprinted by a steady-state cyclical noise (hum). Steady-state indicates that the noise is invariant with time; its attributes, frequency, amplitude, and phase, do not change with time. Hum recorded on seismic data usually is powerline noise and associated higher harmonics; leakage from full-waveform rectified cathodic protection devices that contain the odd higher harmonics of powerline frequencies; or vibrational noise from mechanical devices. The fundamental frequency of powerline hum may be removed during data acquisition with the use of notch filters. Unfortunately, notch filters do not discriminate signal and noise, attenuating both. They also distort adjacent frequencies by phase shifting. Finally, they attenuate only the fundamental mode of the powerline noise; higher harmonics and frequencies other than that of powerlines are not removed. Digital notch filters, applied during processing, have many of the same problems as analog filters applied in the field. The method described here removes hum of a particular frequency. Hum attributes are measured by discrete Fourier analysis, and the hum is canceled from the data by subtraction. Errors are slight and the result of the presence of (random) noise in the window or asynchrony of the hum and data sampling. Error is minimized by increasing window size or by resampling to a finer interval. Errors affect the degree of hum attenuation, not the signal. The residual is steady-state hum of the same frequency. ?? 1994.

  15. Particle filter based entropy

    NARCIS (Netherlands)

    Boers, Y.; Driessen, Hans; Bagchi, Arunabha; Mandal, Pranab K.

    For many problems in the field of tracking or even the wider area of filtering the a posteriori description of the uncertainty can oftentimes not be described by a simple Gaussian density function. In such situations the characterization of the uncertainty by a mean and a covariance does not capture

  16. Spot- Zombie Filtering System

    Directory of Open Access Journals (Sweden)

    Arathy Rajagopal

    2015-10-01

    Full Text Available A major security challenge on the Internet is the existence of the large number of compromised machines. Such machines have been increasingly used to launch various security attacks including spamming and spreading malware, DDoS, and identity theft. These compromised machines are called "Zombies". In general E-mail applications and providers uses spam filters to filter the spam messages. Spam filtering is a technique for discriminating the genuine message from the spam messages. The attackers send the spam messages to the targeted machine by exalting the filters, which causes the increase in false positives and false negatives. We develop an effective spam zombie detection system named SPOT by monitoring outgoing messages of a network. SPOT focuses on the number of outgoing messages that are originated or forwarded by each computer on a network to identify the presence of Zombies. SPOT is designed based on a powerful statistical tool called Sequential Probability Ratio Test, which has bounded false positive and false negative error rates.

  17. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    Science.gov (United States)

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  18. Methanogenesis in Thermophilic Biogas Reactors

    DEFF Research Database (Denmark)

    Ahring, Birgitte Kiær

    1995-01-01

    Methanogenesis in thermophilic biogas reactors fed with different wastes is examined. The specific methanogenic activity with acetate or hydrogen as substrate reflected the organic loading of the specific reactor examined. Increasing the loading of thermophilic reactors stabilized the process...... as indicated by a lower concentration of volatile fatty acids in the effluent from the reactors. The specific methanogenic activity in a thermophilic pilot-plant biogas reactor fed with a mixture of cow and pig manure reflected the stability of the reactor. The numbers of methanogens counted by the most...... against Methanothrix soehngenii or Methanothrix CALS-I in any of the thermophilic biogas reactors examined. Studies using 2-14C-labeled acetate showed that at high concentrations (more than approx. 1 mM) acetate was metabolized via the aceticlastic pathway, transforming the methyl-group of acetate...

  19. Digital Filters for Low Frequency Equalization

    DEFF Research Database (Denmark)

    Tyril, Marni; Abildgaard, J.; Rubak, Per

    2001-01-01

    Digital filters with high resolution in the low-frequency range are studied. Specifically, for a given computational power, traditional IIR filters are compared with warped FIR filters, warped IIR filters, and modified warped FIR filters termed warped individual z FIR filters (WizFIR). The results...... indicate that IIR filters are the most effective in a number of situations....

  20. Fabrication and Characterization of a Conduction Cooled Thermal Neutron Filter

    Energy Technology Data Exchange (ETDEWEB)

    Heather Wampler; Adam Gerth; Heng Ban; Donna Post Guillen; Douglas Porter; Cynthia Papesch

    2010-06-01

    Installation of a conduction cooled thermal (low-energy) neutron filter in an existing domestic test reactor would provide the U.S. the capability to test new reactor fuels and materials for advanced fast (high-energy) reactor concepts. A composite consisting of Al3Hf-Al has been proposed for the neutron filter due to both the neutron filtering properties of hafnium and the conducting capabilities of aluminum. Knowledge of the thermal conductivity of the Al3Hf-Al composite is essential for the design of the filtering system. The present objectives are to identify a suitable fabrication technique and to measure the thermophysical properties of the Al3Hf intermetallic, which has not been done previous to this study. A centrifugal casting method was used to prepare samples of Al3Hf. X-ray diffraction and Rietveld analysis were conducted to determine the structural make-up of each of the samples. Thermophysical properties were measured as follows: specific heat by a differential scanning calorimeter (DSC), thermal diffusivity by a laser flash thermal diffusivity measuring system, thermal expansion by a dilatometer, and thermal conductivity was calculated based on the previous measurements. All measurements were acquired over a temperature range of 90°C - 375°C with some measurements outside these bounds. The average thermal conductivity of the intermetallic Al3Hf (~7 at.% Hf) was found to be ~ 41 W/m-K for the given temperature range. This information fills a knowledge gap in the thermophysical properties of the intermetallic Al3Hf with the specified percentage of hafnium. A model designed to predict composite properties was used to calculate a thermal conductivity of ~177 W/m-K for an Al3Hf-Al composite with 23 vol% Al3Hf. This calculation was based upon the average thermal conductivity of Al3Hf over the specified temperature range.

  1. Compact fusion reactors

    CERN Document Server

    CERN. Geneva

    2015-01-01

    Fusion research is currently to a large extent focused on tokamak (ITER) and inertial confinement (NIF) research. In addition to these large international or national efforts there are private companies performing fusion research using much smaller devices than ITER or NIF. The attempt to achieve fusion energy production through relatively small and compact devices compared to tokamaks decreases the costs and building time of the reactors and this has allowed some private companies to enter the field, like EMC2, General Fusion, Helion Energy, Lawrenceville Plasma Physics and Lockheed Martin. Some of these companies are trying to demonstrate net energy production within the next few years. If they are successful their next step is to attempt to commercialize their technology. In this presentation an overview of compact fusion reactor concepts is given.

  2. MEANS FOR COOLING REACTORS

    Science.gov (United States)

    Wheeler, J.A.

    1957-11-01

    A design of a reactor is presented in which the fuel elements may be immersed in a liquid coolant when desired without the necessity of removing them from the reactor structure. The fuel elements, containing the fissionable material are in plate form and are disposed within spaced slots in a moderator material, such as graphite to form the core. Adjacent the core is a tank containing the liquid coolant. The fuel elements are mounted in spaced relationship on a rotatable shaft which is located between the core and the tank so that by rotation of the shaft the fuel elements may be either inserted in the slots in the core to sustain a chain reaction or immersed in the coolant.

  3. Integrated Microfluidic Reactors.

    Science.gov (United States)

    Lin, Wei-Yu; Wang, Yanju; Wang, Shutao; Tseng, Hsian-Rong

    2009-12-01

    Microfluidic reactors exhibit intrinsic advantages of reduced chemical consumption, safety, high surface-area-to-volume ratios, and improved control over mass and heat transfer superior to the macroscopic reaction setting. In contract to a continuous-flow microfluidic system composed of only a microchannel network, an integrated microfluidic system represents a scalable integration of a microchannel network with functional microfluidic modules, thus enabling the execution and automation of complicated chemical reactions in a single device. In this review, we summarize recent progresses on the development of integrated microfluidics-based chemical reactors for (i) parallel screening of in situ click chemistry libraries, (ii) multistep synthesis of radiolabeled imaging probes for positron emission tomography (PET), (iii) sequential preparation of individually addressable conducting polymer nanowire (CPNW), and (iv) solid-phase synthesis of DNA oligonucleotides. These proof-of-principle demonstrations validate the feasibility and set a solid foundation for exploring a broad application of the integrated microfluidic system.

  4. Analyzing the biomass filter behavior in an anaerobic wastewater treatment plants

    Energy Technology Data Exchange (ETDEWEB)

    Carlos-Hernandez, S.

    2009-07-01

    Nowadays, waste emissions in air, water and soil must be reduced in order to reach the more and more strict environmental rules. In the case of wastewater, there exists a big interest to improve treatment plants performances. The paper deals with the analysis, via the phase portraits method, of a biomass filter behavior in a completely stirred tank reactor deals with the analysis. (Author)

  5. Development of DWDM Filter Manufacture

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    DWDM technology is developing rapidly. Thin film narrow bandpass filter plays an important role in this field. This article presents some achievements in developing the DWDM narrow bandpass filters and also describes the results achieved by us.

  6. Analog filters in nanometer CMOS

    CERN Document Server

    Uhrmann, Heimo; Zimmermann, Horst

    2014-01-01

    Starting from the basics of analog filters and the poor transistor characteristics in nanometer CMOS 10 high-performance analog filters developed by the authors in 120 nm and 65 nm CMOS are described extensively. Among them are gm-C filters, current-mode filters, and active filters for system-on-chip realization for Bluetooth, WCDMA, UWB, DVB-H, and LTE applications. For the active filters several operational amplifier designs are described. The book, furthermore, contains a review of the newest state of research on low-voltage low-power analog filters. To cover the topic of the book comprehensively, linearization issues and measurement methods for the characterization of advanced analog filters are introduced in addition. Numerous elaborate illustrations promote an easy comprehension. This book will be of value to engineers and researchers in industry as well as scientists and Ph.D students at universities. The book is also recommendable to graduate students specializing on nanoelectronics, microelectronics ...

  7. Reactor Neutrino Spectra

    OpenAIRE

    Hayes, A. C.; Vogel, Petr

    2016-01-01

    We present a review of the antineutrino spectra emitted from reactors. Knowledge of these spectra and their associated uncertainties is crucial for neutrino oscillation studies. The spectra used to date have been determined either by converting measured electron spectra to antineutrino spectra or by summing over all of the thousands of transitions that make up the spectra, using modern databases as input. The uncertainties in the subdominant corrections to β-decay plague both methods, and we ...

  8. REACTOR MODERATOR STRUCTURE

    Science.gov (United States)

    Greenstreet, B.L.

    1963-12-31

    A system for maintaining the alignment of moderator block structures in reactors is presented. Integral restraining grids are placed between each layer of blocks in the moderator structure, at the top of the uppermost layer, and at the bottom of the lowermost layer. Slots are provided in the top and bottom surfaces of the moderator blocks so as to provide a keying action with the grids. The grids are maintained in alignment by vertical guiding members disposed about their peripheries. (AEC)

  9. Appendix to HDC 2118 design criteria 100-X reactor water plant, general description - section II

    Energy Technology Data Exchange (ETDEWEB)

    1952-03-29

    The factors responsible for the advances of 100-X compared with the older areas are: Simplification of the process, such as elimination of separate process water clearwells, by having the filtered water reservoirs perform that function. Combination of separate buildings into one building, such as combining filter pump house and process pump house. Use of electric standby. Use of higher capacity pumps and filter basins, and so fewer number of units. Centralization of control and operation. More compact arrangement of plant components. Use of waste heat for space heating, recovered from reactor effluent, backed up by steam plant.

  10. BOILER-SUPERHEATED REACTOR

    Science.gov (United States)

    Heckman, T.P.

    1961-05-01

    A nuclear power reactor of the type in which a liquid moderator-coolant is transformed by nuclear heating into a vapor that may be used to drive a turbo- generator is described. The core of this reactor comprises a plurality of freely suspended tubular fuel elements, called fuel element trains, within which nonboiling pressurized liquid moderator-coolant is preheated and sprayed through orifices in the walls of the trains against the outer walls thereof to be converted into vapor. Passage of the vapor ovcr other unwetted portions of the outside of the fuel elements causes the steam to be superheated. The moderatorcoolant within the fuel elements remains in the liqUid state, and that between the fuel elements remains substantiaily in the vapor state. A unique liquid neutron-absorber control system is used. Advantages expected from the reactor design include reduced fuel element failure, increased stability of operation, direct response to power demand, and circulation of a minimum amount of liquid moderatorcoolant. (A.G.W.)

  11. The OPAL reactor

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.; Irwin, T. [Australian Nuclear Science and Technology Organisation, Sydney (Australia); Ordonez, J.P. [INVAP SE, Bariloche (Argentina)

    2007-07-01

    The project to provide a replacement for Australia's HIFAR reactor began with governmental approval in September 1997 and reached its latest milestone with the achievement of the first full power operation of the OPAL reactor in November 2006. OPAL is a pool-type reactor with a thermal power of 20 MW and a fuel enrichment maximum of 20 per cent. This has been a successful project for both ANSTO (Australian Nuclear Science and Technology Organisation) and the contractor INVAP SE. This project was characterised by extensive interaction with the project's stake-holders during project definition and the use of a performance-based turnkey contract which gave the contractor the maximum opportunity to optimise the design to achieve performance and cost effectiveness. The contactor provided significant in-house resources as well as capacity to manage an international team of suppliers and sub-contractors. A key contributor to the project's successful outcomes has been the development and maintenance of an excellent working relationship between ANSTO and INVAP project teams. Commissioning was undertaken in accordance with the IAEA recommended stages. This paper presents the approaches used to define the project requirements, to choose the supplier and to deliver the project. The main results of hot commissioning are reviewed and the problems encountered examined. Operational experience since hot commissioning is also reviewed.

  12. Nuclear research reactors in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Cota, Anna Paula Leite; Mesquita, Amir Zacarias, E-mail: aplc@cdtn.b, E-mail: amir@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The rising concerns about global warming and energy security have spurred a revival of interest in nuclear energy, giving birth to a 'nuclear power renaissance' in several countries in the world. Particularly in Brazil, in the recent years, the nuclear power renaissance can be seen in the actions that comprise its nuclear program, summarily the increase of the investments in nuclear research institutes and the government target to design and build the Brazilian Multipurpose research Reactor (BMR). In the last 50 years, Brazilian research reactors have been used for training, for producing radioisotopes to meet demands in industry and nuclear medicine, for miscellaneous irradiation services and for academic research. Moreover, the research reactors are used as laboratories to develop technologies in power reactors, which are evaluated today at around 450 worldwide. In this application, those reactors become more viable in relation to power reactors by the lowest cost, by the operation at low temperatures and, furthermore, by lower demand for nuclear fuel. In Brazil, four research reactors were installed: the IEA-R1 and the MB-01 reactors, both at the Instituto de Pesquisas Energeticas Nucleares (IPEN, Sao Paulo); the Argonauta, at the Instituto de Engenharia Nuclear (IEN, Rio de Janeiro) and the IPR-R1 TRIGA reactor, at the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN, Belo Horizonte). The present paper intends to enumerate the characteristics of these reactors, their utilization and current academic research. Therefore, through this paper, we intend to collaborate on the BMR project. (author)

  13. Nuclear research reactors in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Cota, Anna Paula Leite; Mesquita, Amir Zacarias, E-mail: aplc@cdtn.b, E-mail: amir@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    The rising concerns about global warming and energy security have spurred a revival of interest in nuclear energy, giving birth to a 'nuclear power renaissance' in several countries in the world. Particularly in Brazil, in the recent years, the nuclear power renaissance can be seen in the actions that comprise its nuclear program, summarily the increase of the investments in nuclear research institutes and the government target to design and build the Brazilian Multipurpose research Reactor (BMR). In the last 50 years, Brazilian research reactors have been used for training, for producing radioisotopes to meet demands in industry and nuclear medicine, for miscellaneous irradiation services and for academic research. Moreover, the research reactors are used as laboratories to develop technologies in power reactors, which are evaluated today at around 450 worldwide. In this application, those reactors become more viable in relation to power reactors by the lowest cost, by the operation at low temperatures and, furthermore, by lower demand for nuclear fuel. In Brazil, four research reactors were installed: the IEA-R1 and the MB-01 reactors, both at the Instituto de Pesquisas Energeticas Nucleares (IPEN, Sao Paulo); the Argonauta, at the Instituto de Engenharia Nuclear (IEN, Rio de Janeiro) and the IPR-R1 TRIGA reactor, at the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN, Belo Horizonte). The present paper intends to enumerate the characteristics of these reactors, their utilization and current academic research. Therefore, through this paper, we intend to collaborate on the BMR project. (author)

  14. The Rao-Blackwellized Particle Filter: A Filter Bank Implementation

    Directory of Open Access Journals (Sweden)

    Karlsson Rickard

    2010-01-01

    Full Text Available For computational efficiency, it is important to utilize model structure in particle filtering. One of the most important cases occurs when there exists a linear Gaussian substructure, which can be efficiently handled by Kalman filters. This is the standard formulation of the Rao-Blackwellized particle filter (RBPF. This contribution suggests an alternative formulation of this well-known result that facilitates reuse of standard filtering components and which is also suitable for object-oriented programming. Our RBPF formulation can be seen as a Kalman filter bank with stochastic branching and pruning.

  15. Assessment of ceramic membrane filters

    Energy Technology Data Exchange (ETDEWEB)

    Ahluwalia, R.K.; Geyer, H.K.; Im, K.H. [and others

    1995-08-01

    The objectives of this project include the development of analytical models for evaluating the fluid mechanics of membrane coated, dead-end ceramic filters, and to determine the effects of thermal and thermo-chemical aging on the material properties of emerging ceramic hot gas filters. A honeycomb cordierite monolith with a thin ceramic coating and a rigid candle filter were evaluated.

  16. Comparison of long-term performances and final microbial compositions of anaerobic reactors treating landfill leachate

    NARCIS (Netherlands)

    Calli, B.; Mertoglu, B.; Roest, C.; Inanc, B.

    2006-01-01

    Laboratory scale anaerobic upflow filter, sludge blanket and hybrid bed reactors were operated for 860 days in the treatment of high ammonia landfill leachate. Organic loading was gradually increased from 1.3 to 23.5 kg COD/m3 day in the start-up period and then fluctuated according to the COD conce

  17. The filter/moderator arrangement-optimisation for the boron-neutron capture therapy (BNCT).

    Science.gov (United States)

    Tracz, G; Dabkowski, L; Dworak, D; Pytel, K; Woźnicka, U

    2004-01-01

    The paper presents results of the numerical modelling of the fission-converter-based epithermal neutron source designed for the boron neutron capture therapy (BNCT) facility to be located at the Polish research nuclear reactor MARIA at Swierk. The unique design of the fission converter has been proposed due to a specific geometrical surrounding of the reactor. The filter/moderator arrangement has been optimised to moderate fission neutrons to epithermal energies and to remove both fast neutrons and photons from the therapeutic beam. The selected filter/moderator set-up ensures both high epithermal neutron flux and suitably low level of beam contamination. Photons originating from the reactor core are almost eliminated what is the exceptional advantage of the proposed design. It yields one order of magnitude lower gamma radiation dose than the maximum allowed dose in such a type of therapeutic facility. The MCNP code has been used for the computations.

  18. Multilevel particle filter

    KAUST Repository

    Law, Kody

    2016-01-06

    This talk will pertain to the filtering of partially observed diffusions, with discrete-time observations. It is assumed that only biased approximations of the diffusion can be obtained, for choice of an accuracy parameter indexed by l. A multilevel estimator is proposed, consisting of a telescopic sum of increment estimators associated to the successive levels. The work associated to O( 2) mean-square error between the multilevel estimator and average with respect to the filtering distribution is shown to scale optimally, for example as O( 2) for optimal rates of convergence of the underlying diffusion approximation. The method is illustrated on some toy examples as well as estimation of interest rate based on real S&P 500 stock price data.

  19. Filtered cathodic arc source

    Science.gov (United States)

    Falabella, Steven; Sanders, David M.

    1994-01-01

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45.degree. to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles.

  20. Event Filter Dataflow Software

    CERN Document Server

    Meessen, C; Bosman, M; Karr, K M; Pacheco, A; Qian, Z; Touchard, F

    2000-01-01

    This document describes the software handling the flow of events through the Event Filter. This is the fourth iteration of the implementation of the code. When compared to previous versions, enhancements come from the feedback by users and can be seen as simplifications while the interfaces have been kept identical. The high level design of the dataflow is briefly reminded. Then, the details of the implementation of the components are given.

  1. Web Content Filtering

    OpenAIRE

    Gómez Hidalgo, José María; Puertas Sanz, Enrique; Carrero García, Francisco Manuel; Buenaga Rodríguez, Manuel de

    2009-01-01

    Across the years, Internet has evolved from an academic network to a truly communication medium, reaching impressive levels of audience and becoming a billionaire business. Many of our working, studying, and entertainment activities are nowadays overwhelmingly limited if we get disconnected from the net of networks. And of course, with the use comes abuse. The World Wide Web features a wide variety of content that are harmful for children or just inappropriate in the workplace. Web filtering ...

  2. Thermionic Reactor Design Studies

    Energy Technology Data Exchange (ETDEWEB)

    Schock, Alfred

    1994-06-01

    During the 1960's and early 70's the author performed extensive design studies, analyses, and tests aimed at thermionic reactor concepts that differed significantly from those pursued by other investigators. Those studies, like most others under Atomic Energy Commission (AEC and DOE) and the National Aeronautics and Space Administration (NASA) sponsorship, were terminated in the early 1970's. Some of this work was previously published, but much of it was never made available in the open literature. U.S. interest in thermionic reactors resumed in the early 80's, and was greatly intensified by reports about Soviet ground and flight tests in the late 80's. This recent interest resulted in renewed U.S. thermionic reactor development programs, primarily under Department of Defense (DOD) and Department of Energy (DOE) sponsorship. Since most current investigators have not had an opportunity to study all of the author's previous work, a review of the highlights of that work may be of value to them. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling. Where the author's concepts differed from the later Topaz-2 design was in the relative location of the emitter and the collector. Placing the fueled emitter on the outside of the cylindrical diodes permits much higher axial conductances to reduce ohmic

  3. Carbon nanotube filters

    Science.gov (United States)

    Srivastava, A.; Srivastava, O. N.; Talapatra, S.; Vajtai, R.; Ajayan, P. M.

    2004-09-01

    Over the past decade of nanotube research, a variety of organized nanotube architectures have been fabricated using chemical vapour deposition. The idea of using nanotube structures in separation technology has been proposed, but building macroscopic structures that have controlled geometric shapes, density and dimensions for specific applications still remains a challenge. Here we report the fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres. These cylindrical membranes are used as filters to demonstrate their utility in two important settings: the elimination of multiple components of heavy hydrocarbons from petroleum-a crucial step in post-distillation of crude oil-with a single-step filtering process, and the filtration of bacterial contaminants such as Escherichia coli or the nanometre-sized poliovirus (~25 nm) from water. These macro filters can be cleaned for repeated filtration through ultrasonication and autoclaving. The exceptional thermal and mechanical stability of nanotubes, and the high surface area, ease and cost-effective fabrication of the nanotube membranes may allow them to compete with ceramic- and polymer-based separation membranes used commercially.

  4. Archimedes Mass Filter Vaporizer

    Science.gov (United States)

    Putvinski, S.; Agnew, A. F.; Cluggish, B. P.; Ohkawa, T.; Sevier, L.; Umstadter, K. R.; Dresvin, S. V.; Kuteev, B. V.; Feygenson, O. N.; Ivanov, D. V.; Zverev, S. G.; Miroshnikov, I. V.; Egorov, S. M.; Kiesewetter, D. V.; Maliugin, V. I.

    2001-10-01

    Archimedes Technology Group, Inc., is developing a plasma mass separator called the Archimedes Filter that separates waste oxide mixtures ion by ion into two mass groups: light and heavy. Since high-level waste at Hanford has 99.9its radioactivity associated with heavy elements, the Archimedes Filter can effectively decontaminate over three-quarters of that waste. The Filter process involves some preprocessing followed by volatilization and separation by the magnetic and electric fields of the main plasma. This presentation describes the approach to volatilization of the waste oxy-hydroxide mixture by means of a very high heat flux (q > 10 MW/m2). Such a high heat flux is required to ensure congruent evaporation of the complex oxy-hydroxide mixture and is achieved by injection of small droplets of molten waste into an inductively coupled plasma (ICP) torch. This presentation further addresses different issues related to evaporation of the waste including modeling of droplet evaporation, estimates of parameters of plasma torch, and 2D modeling of the plasma. The experimental test bed for oxide vaporization and results of the initial experiments on oxide evaporation in 60 kW ICP torch will also be described.

  5. Application of a low cost ceramic filter to a membrane bioreactor for greywater treatment.

    Science.gov (United States)

    Hasan, Md Mahmudul; Shafiquzzaman, Md; Nakajima, Jun; Ahmed, Abdel Kader T; Azam, Mohammad Shafiul

    2015-03-01

    The performance of a low cost and simple ceramic filter to a membrane bioreactor (MBR) process was evaluated for greywater treatment. The ceramic filter was submerged in an acrylic cylindrical column bioreactor. Synthetic greywater (prepared by shampoo, dish cleaner and laundry detergent) was fed continuously into the reactor. The filter effluent was obtained by gravitational pressure. The average flux performance was observed to be 11.5 LMH with an average hydraulic retention time of 1.7 days. Complete biodegradation of surfactant (methylene blue active substance removal: 99-100%) as well as high organic removal performance (biochemical oxygen demand: 97-100% and total organic carbon: >88%) was obtained. The consistency of flux (11.5 LMH) indicated that the filter can be operated for a long time without fouling. The application of this simple ceramic filter would make MBR technology cost-effective in developing countries for greywater reclamation and reuse.

  6. Laboratory measurement of secondary pollutant yields from ozone reaction with HVAC filters.

    Energy Technology Data Exchange (ETDEWEB)

    Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, J& #233; r& #233; mie; Zhang, Jianshun (Jensen); Fisk, William J.

    2009-09-09

    We used Proton Transfer Reaction - Mass Spectrometry (PTR-MS) and conventional sampling methods to monitor and identify trace level organic pollutants formed in heterogeneous reactions between ozone and HVAC filters in real time. Experiments were carried out using a bench-scale flow tube reactor operating with dry air and humidified air (50% RH), at realistically high ozone concentrations (150 ppbv). We explored different filter media (i.e., fiberglass and cotton/polyester blends) and different particle loadings (i.e., clean filter and filters loaded with particles for 3 months at the Lawrence Berkeley National Laboratory and the Port of Oakland, CA). Detailed emission dynamics of very low levels of certain organic pollutants from filter media upon ozone exposure in the presence of moisture have been obtained and analyzed.

  7. Effect of Hydraulic Retention Time and Wastewater Temperature on Treatment Efficiency of Upflow Anaerobic Filter Treating Campus Domestic Wastewater

    Directory of Open Access Journals (Sweden)

    John Leju Celestino Ladu

    2014-02-01

    Full Text Available The study examined the removal efficiency of upflow anaerobic filter reactor fed continuously with campus domestic wastewater at different hydraulic retention time and wastewater temperature. The reactor was filled with non woven filter materials and operated at hydraulic retention time ranging from 1 to 6 days and wastewater temperature ranging from 20 to 30C. At that operating condition, the result revealed no significant difference for Carbonaceous (COD and nutrients materials except there was significant production of gas. The result revealed that increase in HRT and wastewater temperature improves removal performance of the reactor. The overall reactor removal efficiency for COD, TN, NH4+-N, NO3-N and TP concentration were 51, 22, 21, 28 and 10% and 61 35, 37, 49 and 27% in the anaerobic and anoxic columns, respectively. The experimental system was capable of instantaneous removal of the carbonaceous, nitrogenous and phosphorous compounds.

  8. New reactors for laboratory studies

    Energy Technology Data Exchange (ETDEWEB)

    Berty, J.M.

    1978-02-01

    Recent developments in design of laboratory and bench-scale reactors reflect mostly the developments in reaction engineering; that is the improved understanding of physical and chemical rate limiting processes, their interactions, and their effects on commercial-scale reactor performance. Whether a laboratory reactor is used to study the fundamentals of a commercial process or for pure scientific interest, it is important to know what physical or chemical process is limiting or influencing the rate and selectivity. To clarify this, a definition is required of the regime where physical influences exist, and study the intrinsic kinetics at conditions where physical processes do not affect the rate. Reactors are illustrated whose design was influenced by the above considerations. These reactors produce results which are independent of the reactors in which they were measured, and which can be scaled up with up-to-date reaction engineering techniques.

  9. Sludge granulation and efficiency of phase separator in UASB reactor treating combined industrial effluent

    Institute of Scientific and Technical Information of China (English)

    Abdullah Yasar; Nasir Ahmad; Muhammad Nawaz Chaudhry; Aamir Amanat Ali Khan

    2007-01-01

    Sludge granulation and the effect of gas-liquid-solid separator (GLSS) design on the efficiency of upflow anaerobic sludge blanket (UASB) and upflow anaerobic sludge filter (UASF) reactors, operating at HRTs ranging from 3 to 12 h was investigated. VSS/TS ratio gradually increased in both the reactors with increasing sludge age (from 0.5 to more than 0.7 for UASB reactor and 0.012 to 0.043 for UASF reactor). X-Ray diffraction analysis of the UASF sludge showed the presence of expanding clays revealing its additional absorption capability. Fuoraphyllite and albite precipitation related to excellular polymers of the microbial shell structure, showed the extended growth of microorganisms during sludge granulation. A gradual decrease (82%-69%) in COD removal with decreasing HRT was apparent in UASF reactor. In case of UASB reactor, this decrease was marginal because addition of GLSS device significantly improved (14%-20%) the overall efficiency of the UASB reactor. GLSS enhanced the efficiency of the UASB reactor by increasing the settleability of suspended particles and accelerating the coagulation of colloidal particles due to the velocity gradient.

  10. Sludge granulation and efficiency of phase separator in UASB reactor treating combined industrial effluent.

    Science.gov (United States)

    Yasar, Abdullah; Ahmad, Nasir; Chaudhry, Muhammad Nawaz; Khan, Aamir Amanat Ali

    2007-01-01

    Sludge granulation and the effect of gas-liquid-solid separator (GLSS) design on the efficiency of upflow anaerobic sludge blanket (UASB) and upflow anaerobic sludge filter (UASF) reactors, operating at HRTs ranging from 3 to 12 h were investigated. VSS/TS ratio gradually increased in both the reactors with increasing sludge age (from 0.5 to more than 0.7 for UASB reactor and 0.012 to 0.043 for UASF reactor). X-Ray diffraction analysis of the UASF sludge showed the presence of expanding clays revealing its additional absorption capability. Fuoraphyllite and albite precipitation related to excellular polymers of the microbial shell structure, showed the extended growth of microorganisms during sludge granulation. A gradual decrease (82%-69%) in COD removal with decreasing HRT was apparent in UASF reactor. In case of UASB reactor, this decrease was marginal because addition of GLSS device significantly improved (14%-20%) the overall efficiency of the UASB reactor. GLSS enhanced the efficiency of the UASB reactor by increasing the settleability of suspended particles and accelerating the coagulation of colloidal particles due to the velocity gradient.

  11. Hydrodynamics of microbial filter feeding

    DEFF Research Database (Denmark)

    Nielsen, Lasse Tor; Asadzadeh, Seyed Saeed; Dölger, Julia

    2017-01-01

    Microbial filter feeders are an important group of grazers, significant to the microbial loop, aquatic food webs, and biogeochemical cycling. Our understanding of microbial filter feeding is poor, and, importantly, it is unknown what force microbial filter feeders must generate to process adequat...... predict how optimum filter mesh size increases with cell size in microbial filter feeders, a prediction that accords very well with observations. We expect our results to be of significance for small-scale biophysics and trait-based ecological modeling....

  12. Prognostics Health Management for Advanced Small Modular Reactor Passive Components

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Ramuhalli, Pradeep; Coble, Jamie B.; Mitchell, Mark R.; Wootan, David W.; Hirt, Evelyn H.; Berglin, Eric J.; Bond, Leonard J.; Henager, Charles H.

    2013-10-18

    In the United States, sustainable nuclear power to promote energy security is a key national energy priority. Advanced small modular reactors (AdvSMR), which are based on modularization of advanced reactor concepts using non-light-water reactor (LWR) coolants such as liquid metal, helium, or liquid salt may provide a longer-term alternative to more conventional LWR-based concepts. The economics of AdvSMRs will be impacted by the reduced economy-of-scale savings when compared to traditional LWRs and the controllable day-to-day costs of AdvSMRs are expected to be dominated by operations and maintenance costs. Therefore, achieving the full benefits of AdvSMR deployment requires a new paradigm for plant design and management. In this context, prognostic health management of passive components in AdvSMRs can play a key role in enabling the economic deployment of AdvSMRs. In this paper, the background of AdvSMRs is discussed from which requirements for PHM systems are derived. The particle filter technique is proposed as a prognostics framework for AdvSMR passive components and the suitability of the particle filter technique is illustrated by using it to forecast thermal creep degradation using a physics-of-failure model and based on a combination of types of measurements conceived for passive AdvSMR components.

  13. Investigation of radiations penetration in aluminum used in reactor technology

    Energy Technology Data Exchange (ETDEWEB)

    El-Sayed Abdo, A.; Bashter, I.I.; Makarious, A.S.; Kansouh, W.A. [Atomic Energy Authority, Cairo (Egypt). Nuclear Research Center

    1996-07-01

    Measurements have been carried out to determine the spatial and energy distributions of fast neutrons, total gamma rays and secondary gamma rays in aluminum as a reactor wide structural material experimental work was performed using one of the horizontal channels of the ET-RR-1 reactor. For secondary gamma ray investigations, measurements were carried out for bar, cadmium filtered and boron carbide filtered reactor beams. Aluminum cylinders with a diameter of 100mm and of different thicknesses have been used. Fast neutrons and gamma rays were measured using a neutron-gamma spectrometer with a stilbene scintillator. Discrimination against undesired pulses of neutrons and gamma rays was achieved by a pulse shape discrimination based on zero cross over technique. The measured pulse amplitude distributions of fast neutrons or gamma rays were transformed to neutron or gamma ray energy distributions using the differentiation method and the matrix correction method, respectively. The obtained data were displayed in the form of spatial fluxes and energy distributions and attenuation curves. Total fast neutron macroscopic cross sections, gamma rays linear attenuation coefficients and the relaxation lengths were obtained for the whole energy range and at different energies. (Author).

  14. Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg[sup 196] enrichment

    Science.gov (United States)

    Grossman, M.W.

    1993-02-16

    The present invention is directed to a method of eliminating the cold spot zones presently used on Hg[sup 196] isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

  15. Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg.sup.196 enrichment

    Science.gov (United States)

    Grossman, Mark W.

    1993-01-01

    The present invention is directed to a method of eliminating the cold spot zones presently used on Hg.sup.196 isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

  16. Spiral-shaped disinfection reactors

    KAUST Repository

    Ghaffour, Noreddine

    2015-08-20

    This disclosure includes disinfection reactors and processes for the disinfection of water. Some disinfection reactors include a body that defines an inlet, an outlet, and a spiral flow path between the inlet and the outlet, in which the body is configured to receive water and a disinfectant at the inlet such that the water is exposed to the disinfectant as the water flows through the spiral flow path. Also disclosed are processes for disinfecting water in such disinfection reactors.

  17. Turning points in reactor design

    Energy Technology Data Exchange (ETDEWEB)

    Beckjord, E.S.

    1995-09-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

  18. Acceptability of reactors in space

    Energy Technology Data Exchange (ETDEWEB)

    Buden, D.

    1981-04-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it dies not appear that reactors add measurably to the risk associated with the Space Transportation System.

  19. Hydrogen Production in Fusion Reactors

    OpenAIRE

    Sudo, S.; Tomita, Y.; Yamaguchi, S.; Iiyoshi, A.; Momota, H; Motojima, O.; Okamoto, M.; Ohnishi, M.; Onozuka, M; Uenosono, C.

    1993-01-01

    As one of methods of innovative energy production in fusion reactors without having a conventional turbine-type generator, an efficient use of radiation produced in a fusion reactor with utilizing semiconductor and supplying clean fuel in a form of hydrogen gas are studied. Taking the candidates of reactors such as a toroidal system and an open system for application of the new concepts, the expected efficiency and a concept of plant system are investigated.

  20. Fast reactor programme in India

    Indian Academy of Sciences (India)

    P Chellapandi; P R Vasudeva Rao; Prabhat Kumar

    2015-09-01

    Role of fast breeder reactor (FBR) in the Indian context has been discussed with appropriate justification. The FBR programme since 1985 till 2030 is highlighted focussing on the current status and future direction of fast breeder test reactor (FBTR), prototype fast breeder reactor (PFBR) and FBR-1 and 2. Design and technological challenges of PFBR and design and safety targets with means to achieve the same are the major highlights of this paper.

  1. Neutrino Oscillation Studies with Reactors

    CERN Document Server

    Vogel, Petr; Zhang, Chao

    2015-01-01

    Nuclear reactors are one of the most intense, pure, controllable, cost-effective, and well-understood sources of neutrinos. Reactors have played a major role in the study of neutrino oscillations, a phenomenon that indicates that neutrinos have mass and that neutrino flavors are quantum mechanical mixtures. Over the past several decades reactors were used in the discovery of neutrinos, were crucial in solving the solar neutrino puzzle, and allowed the determination of the smallest mixing angle $\\theta_{13}$. In the near future, reactors will help to determine the neutrino mass hierarchy and to solve the puzzling issue of sterile neutrinos.

  2. Approximately liner phase IIR digital filter banks

    OpenAIRE

    J. D. Ćertić; M. D. Lutovac; L. D. Milić

    2013-01-01

    In this paper, uniform and nonuniform digital filter banks based on approximately linear phase IIR filters and frequency response masking technique (FRM) are presented. Both filter banks are realized as a connection of an interpolated half-band approximately linear phase IIR filter as a first stage of the FRM design and an appropriate number of masking filters. The masking filters are half-band IIR filters with an approximately linear phase. The resulting IIR filter banks are compared with li...

  3. Accelerator based fusion reactor

    Science.gov (United States)

    Liu, Keh-Fei; Chao, Alexander Wu

    2017-08-01

    A feasibility study of fusion reactors based on accelerators is carried out. We consider a novel scheme where a beam from the accelerator hits the target plasma on the resonance of the fusion reaction and establish characteristic criteria for a workable reactor. We consider the reactions d+t\\to n+α,d+{{}3}{{H}\\text{e}}\\to p+α , and p+{{}11}B\\to 3α in this study. The critical temperature of the plasma is determined from overcoming the stopping power of the beam with the fusion energy gain. The needed plasma lifetime is determined from the width of the resonance, the beam velocity and the plasma density. We estimate the critical beam flux by balancing the energy of fusion production against the plasma thermo-energy and the loss due to stopping power for the case of an inert plasma. The product of critical flux and plasma lifetime is independent of plasma density and has a weak dependence on temperature. Even though the critical temperatures for these reactions are lower than those for the thermonuclear reactors, the critical flux is in the range of {{10}22}-{{10}24}~\\text{c}{{\\text{m}}-2}~{{\\text{s}}-1} for the plasma density {ρt}={{10}15}~\\text{c}{{\\text{m}}-3} in the case of an inert plasma. Several approaches to control the growth of the two-stream instability are discussed. We have also considered several scenarios for practical implementation which will require further studies. Finally, we consider the case where the injected beam at the resonance energy maintains the plasma temperature and prolongs its lifetime to reach a steady state. The equations for power balance and particle number conservation are given for this case.

  4. Integrating powdered activated carbon into wastewater tertiary filter for micro-pollutant removal.

    Science.gov (United States)

    Hu, Jingyi; Aarts, Annelies; Shang, Ran; Heijman, Bas; Rietveld, Luuk

    2016-07-15

    Integrating powdered activated carbon (PAC) into wastewater tertiary treatment is a promising technology to reduce organic micro-pollutant (OMP) discharge into the receiving waters. To take advantage of the existing tertiary filter, PAC was pre-embedded inside the filter bed acting as a fixed-bed adsorber. The pre-embedding (i.e. immobilization) of PAC was realized by direct dosing a PAC solution on the filter top, which was then promoted to penetrate into the filter media by a down-flow of tap water. In order to examine the effectiveness of this PAC pre-embedded filter towards OMP removal, batch adsorption tests, representing PAC contact reactor (with the same PAC mass-to-treated water volume ratio as in the PAC pre-embedded filter) were performed as references. Moreover, as a conventional dosing option, PAC was dosed continuously with the filter influent (i.e. the wastewater secondary effluent with the investigated OMPs). Comparative results confirmed a higher OMP removal efficiency associated with the PAC pre-embedded filter, as compared to the batch system with a practical PAC residence time. Furthermore, over a filtration period of 10 h (approximating a realistic filtration cycle for tertiary filters), the continuous dosing approach resulted in less OMP removal. Therefore, it was concluded that the pre-embedding approach can be preferentially considered when integrating PAC into the wastewater tertiary treatment for OMP elimination. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Biparticle fluidized bed reactor

    Science.gov (United States)

    Scott, C.D.

    1993-12-14

    A fluidized bed reactor system which utilizes a fluid phase, a retained fluidized primary particulate phase, and a migratory second particulate phase is described. The primary particulate phase is a particle such as a gel bead containing an immobilized biocatalyst. The secondary particulate phase, continuously introduced and removed in either cocurrent or countercurrent mode, acts in a secondary role such as a sorbent to continuously remove a product or by-product constituent from the fluid phase. Introduction and removal of the sorbent phase is accomplished through the use of feed screw mechanisms and multivane slurry valves. 3 figures.

  6. FAST NEUTRONIC REACTOR

    Science.gov (United States)

    Snell, A.H.

    1957-12-01

    This patent relates to a reactor and process for carrying out a controlled fast neutron chain reaction. A cubical reactive mass, weighing at least 920 metric tons, of uranium metal containing predominantly U/sup 238/ and having a U/sup 235/ content of at least 7.63% is assembled and the maximum neutron reproduction ratio is limited to not substantially over 1.01 by insertion and removal of a varying amount of boron, the reactive mass being substantially freed of moderator.

  7. Digital Filters for Low Frequency Equalization

    DEFF Research Database (Denmark)

    Tyril, Marni; Abildgaard, J.; Rubak, Per

    2001-01-01

    Digital filters with high resolution in the low-frequency range are studied. Specifically, for a given computational power, traditional IIR filters are compared with warped FIR filters, warped IIR filters, and modified warped FIR filters termed warped individual z FIR filters (WizFIR). The results...

  8. Licensed reactor nuclear safety criteria applicable to DOE reactors

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Department of Energy (DOE) Order DOE 5480.6, Safety of Department of Energy-Owned Nuclear Reactors, establishes reactor safety requirements to assure that reactors are sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that adequately protects health and safety and is in accordance with uniform standards, guides, and codes which are consistent with those applied to comparable licensed reactors. This document identifies nuclear safety criteria applied to NRC (Nuclear Regulatory Commission) licensed reactors. The titles of the chapters and sections of USNRC Regulatory Guide 1.70, Standard Format and Content of Safety Analysis Reports for Nuclear Power Plants, Rev. 3, are used as the format for compiling the NRC criteria applied to the various areas of nuclear safety addressed in a safety analysis report for a nuclear reactor. In each section the criteria are compiled in four groups: (1) Code of Federal Regulations, (2) US NRC Regulatory Guides, SRP Branch Technical Positions and Appendices, (3) Codes and Standards, and (4) Supplemental Information. The degree of application of these criteria to a DOE-owned reactor, consistent with their application to comparable licensed reactors, must be determined by the DOE and DOE contractor.

  9. Computational fluid dynamic modeling of fluidized-bed polymerization reactors

    Energy Technology Data Exchange (ETDEWEB)

    Rokkam, Ram [Iowa State Univ., Ames, IA (United States)

    2012-01-01

    Polyethylene is one of the most widely used plastics, and over 60 million tons are produced worldwide every year. Polyethylene is obtained by the catalytic polymerization of ethylene in gas and liquid phase reactors. The gas phase processes are more advantageous, and use fluidized-bed reactors for production of polyethylene. Since they operate so close to the melting point of the polymer, agglomeration is an operational concern in all slurry and gas polymerization processes. Electrostatics and hot spot formation are the main factors that contribute to agglomeration in gas-phase processes. Electrostatic charges in gas phase polymerization fluidized bed reactors are known to influence the bed hydrodynamics, particle elutriation, bubble size, bubble shape etc. Accumulation of electrostatic charges in the fluidized-bed can lead to operational issues. In this work a first-principles electrostatic model is developed and coupled with a multi-fluid computational fluid dynamic (CFD) model to understand the effect of electrostatics on the dynamics of a fluidized-bed. The multi-fluid CFD model for gas-particle flow is based on the kinetic theory of granular flows closures. The electrostatic model is developed based on a fixed, size-dependent charge for each type of particle (catalyst, polymer, polymer fines) phase. The combined CFD model is first verified using simple test cases, validated with experiments and applied to a pilot-scale polymerization fluidized-bed reactor. The CFD model reproduced qualitative trends in particle segregation and entrainment due to electrostatic charges observed in experiments. For the scale up of fluidized bed reactor, filtered models are developed and implemented on pilot scale reactor.

  10. Fast Reactor Fuel Type and Reactor Safety Performance

    Energy Technology Data Exchange (ETDEWEB)

    R. Wigeland; J. Cahalan

    2009-09-01

    Fast Reactor Fuel Type and Reactor Safety Performance R. Wigeland , Idaho National Laboratory J. Cahalan, Argonne National Laboratory The sodium-cooled fast neutron reactor is currently being evaluated for the efficient transmutation of the highly-hazardous, long-lived, transuranic elements that are present in spent nuclear fuel. One of the fundamental choices that will be made is the selection of the fuel type for the fast reactor, whether oxide, metal, carbide, nitride, etc. It is likely that a decision on the fuel type will need to be made before many of the related technologies and facilities can be selected, from fuel fabrication to spent fuel reprocessing. A decision on fuel type should consider all impacts on the fast reactor system, including safety. Past work has demonstrated that the choice of fuel type may have a significant impact on the severity of consequences arising from accidents, especially for severe accidents of low probability. In this paper, the response of sodium-cooled fast reactors is discussed for both oxide and metal fuel types, highlighting the similarities and differences in reactor response and accident consequences. Any fast reactor facility must be designed to be able to successfully prevent, mitigate, or accommodate all consequences of potential events, including accidents. This is typically accomplished by using multiple barriers to the release of radiation, including the cladding on the fuel, the intact primary cooling system, and most visibly the reactor containment building. More recently, this has also included the use of ‘inherent safety’ concepts to reduce or eliminate the potential for serious damage in some cases. Past experience with oxide and metal fuel has demonstrated that both fuel types are suitable for use as fuel in a sodium-cooled fast reactor. However, safety analyses for these two fuel types have also shown that there can be substantial differences in accident consequences due to the neutronic and

  11. A_2N/BAF组合工艺深度除磷脱氮研究%Study on combined A_2N/BAF process for advanced nitrogen and phosphate removal

    Institute of Scientific and Technical Information of China (English)

    李继; 吕小梅; 董文艺; 张真江; 范翊; 王维康

    2012-01-01

    The A2N process with BAF as a nitrification unit was researched aiming at the low carbon and nitrogen ratio domestic wastewater in southern China.According to the problems that effluent ammonia exceeded the standard because of the ammonia carried in surpass sludge and total phosphate couldn't reach the discharge standard when SS of secondary settling tank was high,a secondary BAF was set up,and the total treatment effect of A2N/BAF process was studied.Results showed that the average removal rates of COD,ammonia and TP of A2N stage were 82.0%,70.9% and 90.0%,respectively.Effluent ammonia concentration of secondary settling tank exceeded 10 mg/L when influent was more than 40 mg/L.Average concentration of COD,TP,ammonia,nitrate and SS in final effluent were 35,0.35,1.06,8.01 and 7 mg/L,respectively,which had satisfied the A-level of the national standards.%针对我国南方低碳氮比生活污水,开展以BAF为硝化单元的A2N工艺小试研究,针对超越污泥携带NH4+导致出水超标及二沉池出水SS偏高时TP超标问题,进一步研究增加二级BAF单元的处理效果,形成A2N/BAF工艺.结果表明:A2N段对COD、NH4+-N、TP平均去除率分别为82.0%、70.9%、90.0%;当进水NH4+-N超过40.0 mg/L时,二沉池出水NH4+-N超过10.0 mg/L;二级BAF单元能够硝化二沉池出水NH4+-N及截留SS,最终出水COD、TP、NH4+-N、NO3--N、SS平均质量浓度分别为35、0.35、1.06、8.01、7 mg/L,稳定达到一级A标准.

  12. Advances in Collaborative Filtering

    Science.gov (United States)

    Koren, Yehuda; Bell, Robert

    The collaborative filtering (CF) approach to recommenders has recently enjoyed much interest and progress. The fact that it played a central role within the recently completed Netflix competition has contributed to its popularity. This chapter surveys the recent progress in the field. Matrix factorization techniques, which became a first choice for implementing CF, are described together with recent innovations. We also describe several extensions that bring competitive accuracy into neighborhood methods, which used to dominate the field. The chapter demonstrates how to utilize temporal models and implicit feedback to extend models accuracy. In passing, we include detailed descriptions of some the central methods developed for tackling the challenge of the Netflix Prize competition.

  13. Multilevel ensemble Kalman filtering

    KAUST Repository

    Hoel, Hakon

    2016-06-14

    This work embeds a multilevel Monte Carlo sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF) in the setting of finite dimensional signal evolution and noisy discrete-time observations. The signal dynamics is assumed to be governed by a stochastic differential equation (SDE), and a hierarchy of time grids is introduced for multilevel numerical integration of that SDE. The resulting multilevel EnKF is proved to asymptotically outperform EnKF in terms of computational cost versus approximation accuracy. The theoretical results are illustrated numerically.

  14. Robust Kriged Kalman Filtering

    Energy Technology Data Exchange (ETDEWEB)

    Baingana, Brian; Dall' Anese, Emiliano; Mateos, Gonzalo; Giannakis, Georgios B.

    2015-11-11

    Although the kriged Kalman filter (KKF) has well-documented merits for prediction of spatial-temporal processes, its performance degrades in the presence of outliers due to anomalous events, or measurement equipment failures. This paper proposes a robust KKF model that explicitly accounts for presence of measurement outliers. Exploiting outlier sparsity, a novel l1-regularized estimator that jointly predicts the spatial-temporal process at unmonitored locations, while identifying measurement outliers is put forth. Numerical tests are conducted on a synthetic Internet protocol (IP) network, and real transformer load data. Test results corroborate the effectiveness of the novel estimator in joint spatial prediction and outlier identification.

  15. Charcoal filter testing

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, J. [Nuclear Regulatory Commission, Washington, DC (United States)

    1997-08-01

    In this very brief, informal presentation, a representative of the US Nuclear Regulatory Commission outlines some problems with charcoal filter testing procedures and actions being taken to correct the problems. Two primary concerns are addressed: (1) the process to find the test method is confusing, and (2) the requirements of the reference test procedures result in condensation on the charcoal and causes the test to fail. To address these problems, emergency technical specifications were processed for three nuclear plants. A generic or an administrative letter is proposed as a more permanent solution. 1 fig.

  16. Reactor Physics Analysis Models for a CANDU Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hang Bok

    2007-10-15

    Canada deuterium uranium (CANDU) reactor physics analysis is typically performed in three steps. At first, macroscopic cross-sections of the reference lattice is produced by modeling the reference fuel channel. Secondly macroscopic cross-sections of reactivity devices in the reactor are generated. The macroscopic cross-sections of a reactivity device are calculated as incremental cross-sections by subtracting macroscopic cross-sections of a three-dimensional lattice without reactivity device from those of a three-dimensional lattice with a reactivity device. Using the macroscopic cross-sections of the reference lattice and incremental cross-sections of the reactivity devices, reactor physics calculations are performed. This report summarizes input data of typical CANDU reactor physics codes, which can be utilized for the future CANDU reactor physics analysis.

  17. Reactor Physics Analysis Models for a CANDU Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hang Bok

    2007-10-15

    Canada deuterium uranium (CANDU) reactor physics analysis is typically performed in three steps. At first, macroscopic cross-sections of the reference lattice is produced by modeling the reference fuel channel. Secondly macroscopic cross-sections of reactivity devices in the reactor are generated. The macroscopic cross-sections of a reactivity device are calculated as incremental cross-sections by subtracting macroscopic cross-sections of a three-dimensional lattice without reactivity device from those of a three-dimensional lattice with a reactivity device. Using the macroscopic cross-sections of the reference lattice and incremental cross-sections of the reactivity devices, reactor physics calculations are performed. This report summarizes input data of typical CANDU reactor physics codes, which can be utilized for the future CANDU reactor physics analysis.

  18. From Microwave Filter to Digital Filter and Back Again

    DEFF Research Database (Denmark)

    Dalby, Arne Brejning

    1989-01-01

    A new very simple state variable flow graph representation for interdigital transmission line bandpass filters is presented, which has led to two important results: 1) A new type of digital filter with properties, that surpass the properties of most other (all pole) digital filtertypes. 2......) The study of the new digital filtertype has led to design formulas for interdigital transmission line filters that are very simple compared to the hitherto known formulas. The accuracy is the same or better....

  19. Filter and Filter Bank Design for Image Texture Recognition

    Energy Technology Data Exchange (ETDEWEB)

    Randen, Trygve

    1997-12-31

    The relevance of this thesis to energy and environment lies in its application to remote sensing such as for instance sea floor mapping and seismic pattern recognition. The focus is on the design of two-dimensional filters for feature extraction, segmentation, and classification of digital images with textural content. The features are extracted by filtering with a linear filter and estimating the local energy in the filter response. The thesis gives a review covering broadly most previous approaches to texture feature extraction and continues with proposals of some new techniques. 143 refs., 59 figs., 7 tabs.

  20. State-of-the-art review and report on critical aspects and scale-up considerations in the design of fluidized-bed reactors. Final report on Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Information is given on the design of distributor plates and opening geometry to provide uniform flow over the reactor area. The design of granular bed filters is also considered. Pressure drops and particle size in the bed are discussed. (LTN)

  1. Chemical-vapor-deposition reactor

    Science.gov (United States)

    Chern, S.

    1979-01-01

    Reactor utilizes multiple stacked trays compactly arranged in paths of horizontally channeled reactant gas streams. Design allows faster and more efficient deposits of film on substrates, and reduces gas and energy consumption. Lack of dead spots that trap reactive gases reduces reactor purge time.

  2. Thermochemical reactor systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Lipinski, Wojciech; Davidson, Jane Holloway; Chase, Thomas Richard

    2016-11-29

    Thermochemical reactor systems that may be used to produce a fuel, and methods of using the thermochemical reactor systems, utilizing a reactive cylindrical element, an optional energy transfer cylindrical element, an inlet gas management system, and an outlet gas management system.

  3. Test reactor risk assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, R.H.; Rawlins, J.K.; Stewart, M.E.

    1976-04-01

    A methodology has been developed for the identification of accident initiating events and the fault modeling of systems, including common mode identification, as these methods are applied in overall test reactor risk assessment. The methods are exemplified by a determination of risks to a loss of primary coolant flow in the Engineering Test Reactor.

  4. Studies on a membrane reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mohan, K.; Govind, R.

    1988-10-01

    Simulation is used to evaluate the performance of a catalytic reactor with permeable wall (membrane reactor) in shifting the equilibrium of three reversible reactions (cyclohexane dehydrogenation, hydrogen iodide decomposition, and propylene disproportionation). It is found that the preferred choice of cocurrernt or countercurrent operation is dependent on the physical properties and operating conditions. Methods of enhancing conversion are suggested and temperature effects are discussed.

  5. Thermochemical reactor systems and methods

    Science.gov (United States)

    Lipinski, Wojciech; Davidson, Jane Holloway; Chase, Thomas Richard

    2016-11-29

    Thermochemical reactor systems that may be used to produce a fuel, and methods of using the thermochemical reactor systems, utilizing a reactive cylindrical element, an optional energy transfer cylindrical element, an inlet gas management system, and an outlet gas management system.

  6. Brookhaven leak reactor to close

    CERN Multimedia

    MacIlwain, C

    1999-01-01

    The DOE has announced that the High Flux Beam Reactor at Brookhaven is to close for good. Though the news was not unexpected researchers were angry the decision had been taken before the review to assess the impact of reopening the reactor had been concluded (1 page).

  7. Nanoparticle optical notch filters

    Science.gov (United States)

    Kasinadhuni, Pradeep Kumar

    Developing novel light blocking products involves the design of a nanoparticle optical notch filter, working on the principle of localized surface plasmon resonance (LSPR). These light blocking products can be used in many applications. One such application is to naturally reduce migraine headaches and light sensitivity. Melanopsin ganglion cells present in the retina of the human eye, connect to the suprachiasmatic nucleus (SCN-the body's clock) in the brain, where they participate in the entrainment of the circadian rhythms. As the Melanopsin ganglion cells are involved in triggering the migraine headaches in photophobic patients, it is necessary to block the part of visible spectrum that activates these cells. It is observed from the action potential spectrum of the ganglion cells that they absorb light ranging from 450-500nm (blue-green part) of the visible spectrum with a λmax (peak sensitivity) of around 480nm (blue line). Currently prescribed for migraine patients is the FL-41 coating, which blocks a broad range of wavelengths, including wavelengths associated with melanopsin absorption. The nanoparticle optical notch filter is designed to block light only at 480nm, hence offering an effective prescription for the treatment of migraine headaches.

  8. Robust fault detection filter design

    Science.gov (United States)

    Douglas, Randal Kirk

    The detection filter is a specially tuned linear observer that forms the residual generation part of an analytical redundancy system designed for model-based fault detection and identification. The detection filter has an invariant state subspace structure that produces a residual with known and fixed directional characteristics in response to a known design fault direction. In addition to a parameterization of the detection filter gain, three methods are given for improving performance in the presence of system disturbances, sensor noise, model mismatch and sensitivity to small parameter variations. First, it is shown that by solving a modified algebraic Riccati equation, a stabilizing detection filter gain is found that bounds the H-infinity norm of the transfer matrix from system disturbances and sensor noise to the detection filter residual. Second, a specially chosen expanded-order detection filter is formed with fault detection properties identical to a set of independent reduced-order filters that have no structural constraints. This result is important to the practitioner because the difficult problem of finding a detection filter insensitive to disturbances and sensor noise is converted to the easier problem of finding a set of uncoupled noise insensitive filters. Furthermore, the statistical properties of the reduced-order filter residuals are easier to find than the statistical properties of the structurally constrained detection filter residual. Third, an interpretation of the detection filter as a special case of the dual of the restricted decoupling problem leads to a new detection filter eigenstructure assignment algorithm. The new algorithm places detection filter left eigenvectors, which annihilate the detection spaces, rather than right eigenvectors, which span the detection spaces. This allows for a more flexible observer based fault detection system structure that could not be formulated as a detection filter. Furthermore, the link to the dual

  9. Spatial filters for high average power lasers

    Science.gov (United States)

    Erlandson, Alvin C

    2012-11-27

    A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second slit filter positioned between the second pair of cylindrical lenses.

  10. Reconfigurable Mixed Mode Universal Filter

    Directory of Open Access Journals (Sweden)

    Neelofer Afzal

    2014-01-01

    Full Text Available This paper presents a novel mixed mode universal filter configuration capable of working in voltage and transimpedance mode. The proposed single filter configuration can be reconfigured digitally to realize all the five second order filter functions (types at single output port. Other salient features of proposed configuration include independently programmable filter parameters, full cascadability, and low sensitivity figure. However, all these features are provided at the cost of quite large number of active elements. It needs three digitally programmable current feedback amplifiers and three digitally programmable current conveyors. Use of six active elements is justified by introducing three additional reduced hardware mixed mode universal filter configurations and its comparison with reported filters.

  11. Wavelength Filters in Fibre Optics

    CERN Document Server

    Venghaus, Herbert

    2006-01-01

    Wavelength filters constitute an essential element of fibre-optic networks. This book gives a comprehensive account of the principles and applications of such filters, including their technological realisation. After an introductory chapter on wavelength division multiplexing in current and future fibre optic networks follows a detailed treatment of the phase characteristics of wavelength filters, a factor frequently neglected but of significant importance at high bit rates. Subsequent chapters cover three-dimensional reflection of gratings, arrayed waveguide gratings, fibre Bragg gratings, Fabry-Perot filters, dielectric multilayer filters, ring filters, and interleavers. The book explains the relevant performance parameters, the particular advantages and shortcomings of the various concepts and components, and the preferred applications. It also includes in-depth information on the characteristics of both commercially available devices and those still at the R&D stage. All chapters are authored by inter...

  12. Metallic fuels for advanced reactors

    Science.gov (United States)

    Carmack, W. J.; Porter, D. L.; Chang, Y. I.; Hayes, S. L.; Meyer, M. K.; Burkes, D. E.; Lee, C. B.; Mizuno, T.; Delage, F.; Somers, J.

    2009-07-01

    In the framework of the Generation IV Sodium Fast Reactor Program, the Advanced Fuel Project has conducted an evaluation of the available fuel systems supporting future sodium cooled fast reactors. This paper presents an evaluation of metallic alloy fuels. Early US fast reactor developers originally favored metal alloy fuel due to its high fissile density and compatibility with sodium. The goal of fast reactor fuel development programs is to develop and qualify a nuclear fuel system that performs all of the functions of a conventional fast spectrum nuclear fuel while destroying recycled actinides. This will provide a mechanism for closure of the nuclear fuel cycle. Metal fuels are candidates for this application, based on documented performance of metallic fast reactor fuels and the early results of tests currently being conducted in US and international transmutation fuel development programs.

  13. A model of reactor kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, A.S.; Thompson, B.R.

    1988-09-01

    The analytical model of nuclear reactor transients, incorporating both mechanical and nuclear effects, simulates reactor kinetics. Linear analysis shows the stability borderline for small power perturbations. In a stable system, initial power disturbances die out with time. With an unstable combination of nuclear and mechanical characteristics, initial disturbances persist and may increase with time. With large instability, oscillations of great magnitude occur. Stability requirements set limits on the power density at which particular reactors can operate. The limiting power density depends largely on the product of two terms: the fraction of delayed neutrons and the frictional damping of vibratory motion in reactor core components. As the fraction of delayed neutrons is essentially fixed, mechanical damping largely determines the maximum power density. A computer program, based on the analytical model, calculates and plots reactor power as a nonlinear function of time in response to assigned values of mechanical and nuclear characteristics.

  14. Engineering reactors for catalytic reactions

    Indian Academy of Sciences (India)

    Vivek V Ranade

    2014-03-01

    Catalytic reactions are ubiquitous in chemical and allied industries. A homogeneous or heterogeneous catalyst which provides an alternative route of reaction with lower activation energy and better control on selectivity can make substantial impact on process viability and economics. Extensive studies have been conducted to establish sound basis for design and engineering of reactors for practising such catalytic reactions and for realizing improvements in reactor performance. In this article, application of recent (and not so recent) developments in engineering reactors for catalytic reactions is discussed. Some examples where performance enhancement was realized by catalyst design, appropriate choice of reactor, better injection and dispersion strategies and recent advances in process intensification/ multifunctional reactors are discussed to illustrate the approach.

  15. Unsteady processes in catalytic reactors

    Energy Technology Data Exchange (ETDEWEB)

    Matros, Yu.Sh.

    1985-01-01

    In recent years a realization has occurred that reaction and reactor dynamics must be considered when designing and operating catalytic reactors. In this book, the author has focussed on both the processes occurring on individual porous-catalyst particles as well as the phenomena displayed by collections of these particles in fixed-bed reactors. The major topics discussed include the effects of unsteady-state heat and mass transfer, the influence of inhomogeneities and stagnant regions in fixed beds, and reactor operation during forced cycling of operating conditions. Despite the title of the book, attention is also paid to the determination of the number and stability of fixed-bed steady states, with the aim of describing the possibility of controlling reactors at unstable steady states. However, this development is somewhat dated, given the recent literature on multiplicity phenomena and process control.

  16. Antineutrino Monitoring of Thorium Reactors

    CERN Document Server

    Akindele, Oluwatomi A; Norman, Eric B

    2015-01-01

    Various groups have demonstrated that antineutrino monitoring can be successful in assessing the plutonium content in water-cooled nuclear reactors for nonproliferation applications. New reactor designs and concepts incorporate nontraditional fuels types and chemistry. Understanding how these properties affect the antineutrino emission from a reactor can extend the applicability of antineutrino monitoring.Thorium molten salt reactors (MSR) breed U-233, that if diverted constitute an IAEA direct use material. The antineutrino spectrum from the fission of U-233 has been determined, the feasibility of detecting the diversion of a significant quantity, 8 kg of U-233, within the IAEA timeliness goal of 30 days has been evaluated. The antineutrino emission from a thorium reactor operating under normal conditions is compared to a diversion scenario at a 25 meter standoff by evaluating the daily antineutrino count rate and the energy spectrum of the detected antineutrinos. It was found that the diversion of a signifi...

  17. Catalytic ceramic filter for Diesel soot removal. Preliminary investigations

    Energy Technology Data Exchange (ETDEWEB)

    Ciambelli, P.; Palma, V.; Russo, P. [Dipartimento di Ingegneria Chimica e Alimentare, Universita di Salerno, Fisciano, Salerno (Italy); Vaccaro, S. [Dipartimento di Chimica, Universita di Napoli Federico II,, Napoli (Italy)

    1998-12-31

    The catalytic combustion of Diesel soot was studied performing reactivity tests of soot-catalyst mixtures in a tubular flow reactor. The dependence of the reaction rate on the temperature was found. With respect to the uncatalysed combustion the reactivity of the soot in the presence of catalyst increased of some orders of magnitude while the apparent activation energy was found to be less than half. Complementary tests were carried out for studying the regeneration process of ceramic sintered filter samples by uncatalysed and catalysed combustion of the accumulated carbon particles. With respect to the uncatalysed case, the presence of catalyst reduces the carbon ignition temperature so favouring spontaneous filter regeneration. However, the catalyst activity appears to be lower than that observed in the reactivity tests. The results of both series of tests were discussed and compared in order to assess the role of carbon-catalyst contact and of catalyst preparation on its performances. 20 refs.

  18. Near infrared ultrafast pump-probe spectroscopy with ZrF4-BaF2-LaF3-AlF3-NaF fiber supercontinuum

    Science.gov (United States)

    Fischbach, Stefan; Gorbach, Andrey V.; Di Nuzzo, Daniele; Da Como, Enrico

    2015-07-01

    We report on the performance of a setup designed for femtosecond pump-probe spectroscopy in the near infrared (NIR) spectral region. We generate a supercontinuum (SC) probe by coupling 140 fs light pulses at 1550 nm into a ZrF4-BaF2-LaF3-AlF3-NaF (ZBLAN) fiber. The combined high nonlinearity and transparency of the ZBLAN fluoride glass allows us to obtain a SC probe from 1 to 2.6 μm. The NIR pulses are used to demonstrate a proof of principle experiment probing the relaxation of photo induced excitations in a conjugated polymer:fullerene blend film. The results show the possibility to perform fibre based NIR SC femtosecond spectroscopy at >100 KHz repetition rate and using lasers with pulse energy just above 300 nJ.

  19. Semi-Hausdorff Fuzzy Filters

    Directory of Open Access Journals (Sweden)

    V. Lakshmana Gomathi Nayagam

    2007-01-01

    Full Text Available The notion of fuzzy filters was studied by Vicente and Aranguren (1988, Lowen (1979, and Ramakrishnan and Nayagam (2002. The notion of fuzzily compactness was introduced and studied by Ramakrishnan and Nayagam (2002. In this paper, an equivalent condition of fuzzily compactness is studied and a new notion of semi-Hausdorffness on fuzzy filters, which cannot be defined in crisp theory of filters, is introduced and studied.

  20. Cuckoo Filter: Simplification and Analysis

    OpenAIRE

    Eppstein, David

    2016-01-01

    The cuckoo filter data structure of Fan, Andersen, Kaminsky, and Mitzenmacher (CoNEXT 2014) performs the same approximate set operations as a Bloom filter in less memory, with better locality of reference, and adds the ability to delete elements as well as to insert them. However, until now it has lacked theoretical guarantees on its performance. We describe a simplified version of the cuckoo filter using fewer hash function calls per query. With this simplification, we provide the first theo...

  1. Multi-filter spectrophotometry simulations

    Science.gov (United States)

    Callaghan, Kim A. S.; Gibson, Brad K.; Hickson, Paul

    1993-01-01

    To complement both the multi-filter observations of quasar environments described in these proceedings, as well as the proposed UBC 2.7 m Liquid Mirror Telescope (LMT) redshift survey, we have initiated a program of simulated multi-filter spectrophotometry. The goal of this work, still very much in progress, is a better quantitative assessment of the multiband technique as a viable mechanism for obtaining useful redshift and morphological class information from large scale multi-filter surveys.

  2. Faraday anomalous dispersion optical filters

    Science.gov (United States)

    Shay, T. M.; Yin, B.; Alvarez, L. S.

    1993-01-01

    The effect of Faraday anomalous dispersion optical filters on infrared and blue transitions of some alkali atoms is calculated. A composite system is designed to further increase the background noise rejection. The measured results of the solar background rejection and image quality through the filter are presented. The results show that the filter may provide high transmission and high background noise rejection with excellent image quality.

  3. Filters and supports in orthoalgebras

    Science.gov (United States)

    Foulis, D. J.; Greechie, R. J.; Rüttimann, G. T.

    1992-05-01

    An orthoalgebra, which is a natural generalization of an orthomodular lattice or poset, may be viewed as a “logic” or “proposition system” and, under a welldefined set of circumstances, its elements may be classified according to the Aristotelian modalities: necessary, impossible, possible, and contingent. The necessary propositions band together to form a local filter, that is, a set that intersects every Boolean subalgebra in a filter. In this paper, we give a coherent account of the basic theory of Orthoalgebras, define and study filters, local filters, and associated structures, and prove a version of the compactness theorem in classical algebraic logic.

  4. Spatial filtering with photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Maigyte, Lina [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Rambla Sant Nebridi 22, Terrassa 08222 (Spain); Staliunas, Kestutis [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Rambla Sant Nebridi 22, Terrassa 08222 (Spain); Institució Catalana de Recerca i Estudis Avançats (ICREA), Pg. Lluís Companys 23, Barcelona 08010 (Spain)

    2015-03-15

    Photonic crystals are well known for their celebrated photonic band-gaps—the forbidden frequency ranges, for which the light waves cannot propagate through the structure. The frequency (or chromatic) band-gaps of photonic crystals can be utilized for frequency filtering. In analogy to the chromatic band-gaps and the frequency filtering, the angular band-gaps and the angular (spatial) filtering are also possible in photonic crystals. In this article, we review the recent advances of the spatial filtering using the photonic crystals in different propagation regimes and for different geometries. We review the most evident configuration of filtering in Bragg regime (with the back-reflection—i.e., in the configuration with band-gaps) as well as in Laue regime (with forward deflection—i.e., in the configuration without band-gaps). We explore the spatial filtering in crystals with different symmetries, including axisymmetric crystals; we discuss the role of chirping, i.e., the dependence of the longitudinal period along the structure. We also review the experimental techniques to fabricate the photonic crystals and numerical techniques to explore the spatial filtering. Finally, we discuss several implementations of such filters for intracavity spatial filtering.

  5. Optimization of integrated polarization filters

    CERN Document Server

    Gagnon, Denis; Déziel, Jean-Luc; Dubé, Louis J

    2014-01-01

    This study reports on the design of small footprint, integrated polarization filters based on engineered photonic lattices. Using a rods-in-air lattice as a basis for a TE filter and a holes-in-slab lattice for the analogous TM filter, we are able to maximize the degree of polarization of the output beams up to 98 % with a transmission efficiency greater than 75 %. The proposed designs allow not only for logical polarization filtering, but can also be tailored to output an arbitrary transverse beam profile. The lattice configurations are found using a recently proposed parallel tabu search algorithm for combinatorial optimization problems in integrated photonics.

  6. Adaptive filtering and change detection

    CERN Document Server

    Gustafsson, Fredrik

    2003-01-01

    Adaptive filtering is a classical branch of digital signal processing (DSP). Industrial interest in adaptive filtering grows continuously with the increase in computer performance that allows ever more conplex algorithms to be run in real-time. Change detection is a type of adaptive filtering for non-stationary signals and is also the basic tool in fault detection and diagnosis. Often considered as separate subjects Adaptive Filtering and Change Detection bridges a gap in the literature with a unified treatment of these areas, emphasizing that change detection is a natural extensi

  7. Filter selection using genetic algorithms

    Science.gov (United States)

    Patel, Devesh

    1996-03-01

    Convolution operators act as matched filters for certain types of variations found in images and have been extensively used in the analysis of images. However, filtering through a bank of N filters generates N filtered images, consequently increasing the amount of data considerably. Moreover, not all these filters have the same discriminatory capabilities for the individual images, thus making the task of any classifier difficult. In this paper, we use genetic algorithms to select a subset of relevant filters. Genetic algorithms represent a class of adaptive search techniques where the processes are similar to natural selection of biological evolution. The steady state model (GENITOR) has been used in this paper. The reduction of filters improves the performance of the classifier (which in this paper is the multi-layer perceptron neural network) and furthermore reduces the computational requirement. In this study we use the Laws filters which were proposed for the analysis of texture images. Our aim is to recognize the different textures on the images using the reduced filter set.

  8. Kalman filtering implementation with Matlab

    OpenAIRE

    Kleinbauer, Rachel

    2004-01-01

    1960 und 1961 veröffentlichte Rudolf Emil Kalmen seine Arbeiten über einen rekursiven prädiktiven Filter, der auf dem Gebrauch von rekursiven Algorithmen basiert. Damit revolutionierte er das Feld der Schätzverfahren. Seitdem ist der sogenannte Kalman Filter Gegenstand ausführlicher Forschung und findet bis heute Anwendung in zahlreichen Gebieten. Der Kalman Filter schätzt den Zustand eines dynamischen Systems, auch wenn die exakte Form dieses Systems unbekannt ist. Der Filter ist sehr lei...

  9. The intractable cigarette 'filter problem'.

    Science.gov (United States)

    Harris, Bradford

    2011-05-01

    When lung cancer fears emerged in the 1950s, cigarette companies initiated a shift in cigarette design from unfiltered to filtered cigarettes. Both the ineffectiveness of cigarette filters and the tobacco industry's misleading marketing of the benefits of filtered cigarettes have been well documented. However, during the 1950s and 1960s, American cigarette companies spent millions of dollars to solve what the industry identified as the 'filter problem'. These extensive filter research and development efforts suggest a phase of genuine optimism among cigarette designers that cigarette filters could be engineered to mitigate the health hazards of smoking. This paper explores the early history of cigarette filter research and development in order to elucidate why and when seemingly sincere filter engineering efforts devolved into manipulations in cigarette design to sustain cigarette marketing and mitigate consumers' concerns about the health consequences of smoking. Relevant word and phrase searches were conducted in the Legacy Tobacco Documents Library online database, Google Patents, and media and medical databases including ProQuest, JSTOR, Medline and PubMed. 13 tobacco industry documents were identified that track prominent developments involved in what the industry referred to as the 'filter problem'. These reveal a period of intense focus on the 'filter problem' that persisted from the mid-1950s to the mid-1960s, featuring collaborations between cigarette producers and large American chemical and textile companies to develop effective filters. In addition, the documents reveal how cigarette filter researchers' growing scientific knowledge of smoke chemistry led to increasing recognition that filters were unlikely to offer significant health protection. One of the primary concerns of cigarette producers was to design cigarette filters that could be economically incorporated into the massive scale of cigarette production. The synthetic plastic cellulose acetate

  10. Pilot-scale study on treatment of the secondary biochemical effluent from sewage factory with biological aerated filter%曝气生物滤池补充处理污水厂出水的中试研究

    Institute of Scientific and Technical Information of China (English)

    宁艳春; 李忠臣; 高兴波; 蒲文晶; 韩文举; 邱延波; 吕利民; 庄立波; 袁伟

    2012-01-01

    针对某污水处理厂二级生化出水,开展了曝气生物滤池中试实验研究.分别开展了下向流和上向流滤池形式的实验研究,通过对比实验,最终确定适宜的滤池形式和滤料;并对气水体积比、水力负荷、水温等影响因素进行了分析和讨论,优化操作条件,确定了工艺的最佳操作参数.通过活性炭、陶粒2种滤料的微观结构对比,对反应机理进行了探讨.中试实验结果表明:上向流曝气生物滤池(活性炭、陶粒混装滤料)对污水厂二级生化出水进行补充处理,可以使污水厂出水COD指标达到污水综合排放标准(GB8978-1996)的一级标准.%The pilot experiment of BAF was used to treat the secondary biochemical effluent from sewage factory. The contrasting experiment was carried out on two modes of BAF (UBAF and DBAF), and two kinds of carriers (ceramic granule and activated carbon). By comparing, the optimum BAF form and filter materials were determined finally. The principal influencing factors of BAF were the ratio of air to water, hydraulic loading, water temperature. And the operational conditions were optimized, and defined the best operation parameter to obtain the optimization resolution. The result showed: that using two-stage UBAF which is filled with ceramic granule and activated carbon,treated the secondary biochemical effluent, the effluent quality can achieve the first level criteria specified in the Integrated Wastewater Discharge Standard (GB 8978-1996).

  11. Licensed reactor nuclear safety criteria applicable to DOE reactors

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    This document is a compilation and source list of nuclear safety criteria that the Nuclear Regulatory Commission (NRC) applies to licensed reactors; it can be used by DOE and DOE contractors to identify NRC criteria to be evaluated for application to the DOE reactors under their cognizance. The criteria listed are those that are applied to the areas of nuclear safety addressed in the safety analysis report of a licensed reactor. They are derived from federal regulations, USNRC regulatory guides, Standard Review Plan (SRP) branch technical positions and appendices, and industry codes and standards.

  12. University Reactor Conversion Lessons Learned Workshop for Purdue University Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Eric C. Woolstenhulme; Dana M. Hewit

    2008-09-01

    The Department of Energy’s Idaho National Laboratory, under its programmatic responsibility for managing the University Research Reactor Conversions, has completed the conversion of the reactor at Purdue University Reactor. With this work completed and in anticipation of other impending conversion projects, the INL convened and engaged the project participants in a structured discussion to capture the lessons learned. The lessons learned process has allowed us to capture gaps, opportunities, and good practices, drawing from the project team’s experiences. These lessons will be used to raise the standard of excellence, effectiveness, and efficiency in all future conversion projects.

  13. Neutronic Reactor Shield

    Science.gov (United States)

    Fermi, Enrico; Zinn, Walter H.

    The argument of the present Patent is a radiation shield suitable for protection of personnel from both gamma rays and neutrons. Such a shield from dangerous radiations is achieved to the best by the combined action of a neutron slowing material (a moderator) and a neutron absorbing material. Hydrogen is particularly effective for this shield since it is a good absorber of slow neutrons and a good moderator of fast neutrons. The neutrons slowed down by hydrogen may, then, be absorbed by other materials such as boron, cadmium, gadolinium, samarium or steel. Steel is particularly convenient for the purpose, given its effectiveness in absorbing also the gamma rays from the reactor (both primary gamma rays and secondary ones produced by the moderation of neutrons). In particular, in the present Patent a shield is described, made of alternate layers of steel and Masonite (an hydrolized ligno-cellulose material). The object of the present Patent is not discussed in any other published paper.

  14. Neutrino Experiments at Reactors

    Science.gov (United States)

    Reines, F.; Gurr, H. S.; Jenkins, T. L.; Munsee, J. H.

    1968-09-09

    A description is given of the electron-antineutrino program using a large fission reactor. A search has been made for a neutral weak interaction via the reaction (electron antineutrino + d .> p + n + electron antineutrino), the reaction (electron antineutrino + d .> n + n + e{sup +}) has now been detected, and an effort is underway to observe the elastic scattering reaction (electron antineutrino + e{sup -} .> electron antineutrino + e{sup -}) as well as to measure more precisely the reaction (electron antineutrino + p .> n + e{sup+}). The upper limit on the elastic scattering reaction which we have obtained with our large composite NaI, plastic, liquid scintillation detector is now about 50 times the predicted value.

  15. Mercury Oxidation via Catalytic Barrier Filters Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Wayne Seames; Michael Mann; Darrin Muggli; Jason Hrdlicka; Carol Horabik

    2007-09-30

    In 2004, the Department of Energy National Energy Technology Laboratory awarded the University of North Dakota a Phase II University Coal Research grant to explore the feasibility of using barrier filters coated with a catalyst to oxidize elemental mercury in coal combustion flue gas streams. Oxidized mercury is substantially easier to remove than elemental mercury. If successful, this technique has the potential to substantially reduce mercury control costs for those installations that already utilize baghouse barrier filters for particulate removal. Completed in 2004, Phase I of this project successfully met its objectives of screening and assessing the possible feasibility of using catalyst coated barrier filters for the oxidation of vapor phase elemental mercury in coal combustion generated flue gas streams. Completed in September 2007, Phase II of this project successfully met its three objectives. First, an effective coating method for a catalytic barrier filter was found. Second, the effects of a simulated flue gas on the catalysts in a bench-scale reactor were determined. Finally, the performance of the best catalyst was assessed using real flue gas generated by a 19 kW research combustor firing each of three separate coal types.

  16. Prediction of the ledge thickness inside a high-temperature metallurgical reactor using a virtual sensor

    Science.gov (United States)

    LeBreux, Marc; Désilets, Martin; Lacroix, Marcel

    2012-11-01

    A non-intrusive inverse heat transfer procedure for predicting the time-varying thickness of the phase-change ledge on the inner surface of the walls of a high-temperature metallurgical reactor is presented. An extended Kalman filter with augmented state is coupled with a nonlinear state-space model of the reactor in order to estimate on-line the position of the phase front. The data are collected by a heat flux sensor located inside or outside of the reactor wall. This non-intrusive method can be seen as a virtual sensor which is defined as the combination of an estimation algorithm with measurements for the estimation of 'hard to measure' on-line process variables. The inverse prediction of the ledge thickness with the virtual sensor is thoroughly tested for typical operating conditions that prevail inside an industrial facility. Due to the fact that the melting/solidification process inside the reactor is highly nonlinear, results show that the accuracy of the state-space identification and the virtual sensor estimation is far superior when a nonlinear state-space model and the extended Kalman filter are employed, as opposed to a linear state-space model and the classic Kalman filter. In the former, it is shown that the discrepancy between the exact and the estimated ledge thickness remains smaller than 10% at all times.

  17. Advanced treatment of port cabin washing wastewater by integrated process ozonization-biological aerated filter-biological aerated filter%一体化O3-BAF—BAF组合工艺深度处理港口洗舱废水

    Institute of Scientific and Technical Information of China (English)

    葛启龙; 汪晓军

    2013-01-01

    采用一体化臭氧曝气生物滤池(O3-BAF)—曝气生物滤池(BAF)组合工艺对二级生化处理后的港口码头洗舱化学品废水进行深度处理,进水COD约为200~240 mg/L,色度为16~32倍时,经该工艺处理后出水COD<30mg/L,去除率>91%,色度降到4倍以下,出水水质达到《生活杂用水水质标准》(CJ/T48-1999)要求.工程运行实践表明,该深度处理系统运行稳定,处理效率高,具有良好的经济效益与环境效益.%The integrated ozonization-biological aerated filter-biological aerated filter combined process has been applied to the advanced treatment of port cabin washing wastewater after secondary biochemical treatment.When the COD of the influent is 200-240 mg/L,and chroma is 16-32 times,COD of effluent is reduced to less than 30 mg/L after treatment,the removing rate is more than 91%,and chroma is reduced to less than 4 times,reaching the specified Miscellaneous Domestic Water Quality Standard(CJ/T 48-1999).The result shows that the advanced treatment system runs stably,and has high treatment efficiency.It has great economic and environmental benefits.

  18. 适宜填料提高温室甲鱼养殖废水曝气生物滤池处理效能%Suitable substrates to improve efficiency of biological aerated filter for greenhouse turtle breeding wastewater treatment

    Institute of Scientific and Technical Information of China (English)

    陈重军; 张蕊; 王亮; 吴伟祥; 陈英旭

    2013-01-01

    The greenhouse turtle breeding wastewater contains high concentration of nitrogen and phosphorous. Its unordered discharge has seriously affected the quality and safety of daily and production water supply of the surrounding residents. The greenhouse turtle breeding wastewater has become one of the main pollution sources in the rural area of the Yangtze River Delta, especially in the compact district of turtle aquaculture. In order to provide some experiences for the practical application in a turtle aquaculture farm, the experiment would explore the feasibility of a biological aerated filter (BAF) for greenhouse turtle breeding wastewater treatment, and select a suitable substrate for the BAF. In this paper, we have investigated three types of substrates filling in the BAF, i.e. clinoptilolite, bio-ceramic and gravel, in terms of their capacity of adsorbing the nitrogen and phosphorous in the greenhouse turtle breeding wastewater, and the performance of purifying wastewater. The results have showed that the nitrogen adsorption capacities in the three substrates are similar in the range of 0.469-0.563 mg/g, but that the phosphorous adsorption capacity greatly varies from 0.003 to 0.114 mg/g with the best one from the clinoptilolite. A pilot scale of BAF for greenhouse turtle breeding wastewater treatment was built in one of the typical greenhouse turtle aquaculture farms in the Yangtze River Delta. After 122 days running in the BAF with different influent concentration, the results showed that the BAF with clinoptilolite, bio-ceramic and gravel substrate have good removal efficiency for COD, NH4+-N, TN, TP and so on. The result of pilot engineering has showed that average COD, NH4+-N, TN and TP removal efficiencies of a biological aerated filter are 59.4%-61.1%,93.2%-97.2%,54.4%-71.1%and 62.7%-84.3%, respectively. The clinoptilolite filter excels in the removal of total nitrogen (TN) compared to the others, whereas the bio-ceramic and the gravel filters have the

  19. Particle Kalman Filtering: A Nonlinear Framework for Ensemble Kalman Filters

    KAUST Repository

    Hoteit, Ibrahim

    2010-09-19

    Optimal nonlinear filtering consists of sequentially determining the conditional probability distribution functions (pdf) of the system state, given the information of the dynamical and measurement processes and the previous measurements. Once the pdfs are obtained, one can determine different estimates, for instance, the minimum variance estimate, or the maximum a posteriori estimate, of the system state. It can be shown that, many filters, including the Kalman filter (KF) and the particle filter (PF), can be derived based on this sequential Bayesian estimation framework. In this contribution, we present a Gaussian mixture‐based framework, called the particle Kalman filter (PKF), and discuss how the different EnKF methods can be derived as simplified variants of the PKF. We also discuss approaches to reducing the computational burden of the PKF in order to make it suitable for complex geosciences applications. We use the strongly nonlinear Lorenz‐96 model to illustrate the performance of the PKF.

  20. Application of DFT Filter Banks and Cosine Modulated Filter Banks in Filtering

    Science.gov (United States)

    Lin, Yuan-Pei; Vaidyanathan, P. P.

    1994-01-01

    None given. This is a proposal for a paper to be presented at APCCAS '94 in Taipei, Taiwan. (From outline): This work is organized as follows: Sec. II is devoted to the construction of the new 2m channel under-decimated DFT filter bank. Implementation and complexity of this DFT filter bank are discussed therein. IN a similar manner, the new 2m channel cosine modulated filter bank is discussed in Sec. III. Design examples are given in Sec. IV.