WorldWideScience

Sample records for field scanning optical

  1. Transfer functions in collection scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Vohnsen, Brian; Bozhevolnaya, Elena A.

    1999-01-01

    It is generally accepted that, if in collection near-field optical microscopy the probe-sample coupling can be disregarded, a fiber probe can be considered as a detector of the near-field intensity whose size can be accounted for via an intensity transfer function. We show that, in general...... are considered with respect to the relation between near-field optical images and the corresponding intensity distributions. Our conclusions are supported with numerical simulations and experimental results obtained by using a photon scanning tunneling microscope with an uncoated fiber tip....

  2. Design of Scattering Scanning Near-Field Optical Microscope

    Science.gov (United States)

    Schrecongost, Dustin

    The primary objective of this work is to construct a fully functional scattering type Scanning Near-field Optical Microscope (s-SNOM), and to understand the working mechanisms behind it. An s-SNOM is an instrument made up of two separate instruments working in unison. One instrument is a scanning optical microscope focusing light onto a raster scanning sample surface combined with an interferometer set up. The second instrument is an Atomic Force Microscope (AFM) operating in noncontact mode. The AFM uses a small probe that interacts with the raster scanning sample surface to map out the topography of the of the sample surface. An s-SNOM uses both of these instruments simultaneously by focusing the light of the optical microscope onto the probe of the AFM. This probe acts as a nano-antenna and confines the light allowing for light-matter interaction to be inferred far below the resolution of the diffraction limit of light. This specific s-SNOM system is unique to others by having a controllable environment. It is high vacuum compatible and variable temperature. In addition, it is efficient at collecting scattered light due to the focusing objective being a partial elliptical mirror which collects 360° of light around the major axis. This s-SNOM system will be used for direct imaging of surface plasmons. Intended works are inducing surface plasmons on InSe thin films, and seeing the enhancement effect of introducing Au nano-rods. Also dielectric properties of materials will be interpreted such as the metal to insulator phase transition of NbO2.

  3. Optical Field Measurement of Nano-Apertures with a Scanning Near-Field Optical Microscope

    Institute of Scientific and Technical Information of China (English)

    XU Tie-Jun; XU Ji-Ying; WANG Jia; TIAN Qian

    2004-01-01

    @@ We investigate optical near-field distributions of the unconventional C-apertures and the conventional square apertures in preliminary experiment with an aperture scanning near-field optical microscope. These nano-apertures are fabricated in Au film on a glass substrate with focused ion beam technology. The experimental results indicate the uptrend of output light intensity that a C-aperture enables the intensity maximum to increase at least 10times more than a square aperture with same unit length. The measured near-field light spot sizes of C-apertureand square aperture with 200-nm unit length are 439nm × 500nm and 245nm × 216nm, respectively.

  4. Multi-mode Scanning Near-field Optical Microscope

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A scanning near-field optical microscope using uncoated fiber tip is described, which can work in transmission and reflection configurations, both capable of working in illumination and collection-mode, so that either transparent or opaque sample can be investigated. Depending on different applications, either constant-gap or constant-height images can be achieved. A compact homemade translator permits to select interested area of sample in the range of 4mm×4mm. Working in the constant-height as well as transmission and collection-mode configuration, several kinds of samples such as holographic grating, liposome and zeolite were investigated. The experimental results revealed the dependence of the optical resolution of the SNOM on the tip-sample separation.

  5. Numerical Modeling of a Near-Field Scanning Optical System

    Science.gov (United States)

    Kann, Joshua Louis

    A near-field scanning optical (NFO) system utilizes a subwavelength sized aperture to illuminate a sample. The aperture raster scans the sample. During the scan, the aperture is held in proximity to the sample. At each sampling point, the integrated far-zone energy distribution is stored. This collection of data is used to generate an image of the sample's surface. The main advantage of NFO systems is their very high spatial resolution. In this dissertation a hybrid finite-difference-time-domain (FDTD)/angular spectrum code is used to study the electromagnetic and imaging properties of a NFO scanning system. In addition, a finite-difference thermal (FD-thermal) code is used to calculate the thermal properties of a NFO system. Various aperture/sample geometries are studied numerically using both TE and TM polarization within a two-dimensional metallic waveguide that forms the aperture. The spatial properties of the electric field emitted by the aperture with no sample present are greatly influenced by the polarization. In particular, the electric field with TM polarization exhibits sharp peaks near the corners of the aperture, while the field with TE polarization is smooth and peaked at the center of the aperture. For both polarizations, the electric field remains collimated for a distance comparable to the aperture size. The electric field for both polarizations is altered when a dielectric sample is placed in proximity to the aperture. It is shown that the most representative image of the sample's topography is obtained using TE polarization and the resulting total far-zone energy as the sampled data. It is also shown that simpler scalar methods do not accurately predict the imaging behavior of a NFO system. Under certain circumstances the relationship between the sample's topography and the detected image is nearly linear. Under these conditions a system transfer function is calculated. Using the transfer function, it is shown that the spatial resolution of a NFO

  6. Operation of a scanning near field optical microscope in reflection in combination with a scanning force microscope

    NARCIS (Netherlands)

    van Hulst, N.F.; Moers, M.H.P.; Moers, M.H.P.; Noordman, O.F.J.; Noordman, O.F.J.; Faulkner, T.; Segerink, Franciscus B.; van der Werf, Kees; de Grooth, B.G.; Bölger, B.; Bölger, B.

    1992-01-01

    Images obtained with a scanning near field optical microscope (SNOM) operating in reflection are presented. We have obtained the first results with a SiN tip as optical probe. The instrument is simultaneously operated as a scanning force microscope (SFM). Moreover, the instrument incorporates an

  7. 3D manipulation with a scanning near field optical nanotweezers

    CERN Document Server

    Berthelot, J; Juan, M L; Kreuzer, M P; Renger, J; Quidant, R

    2013-01-01

    Recent advances in Nanotechnologies have prompted the need for tools to accurately and non-invasively manipulate individual nano-objects. Among possible strategies, optical forces have been foreseen to provide researchers with nano-optical tweezers capable to trap a specimen and move it in 3D. In practice though, the combination of weak optical forces involved and photothermal issues have thus far prevented their experimental realization. Here, we demonstrate first 3D optical manipulation of single 50 nm dielectric objects with near field nano-tweezers. The nano-optical trap is built by engineering a bowtie plasmonic aperture at the extremity of a tapered metal-coated optical fiber. Both the trapping operation and monitoring are performed through the optical fiber making these nano-tweezers totally autonomous and free of bulky optical elements. The achieved trapping performances allow for the trapped specimen to be moved over tens of micrometers during several minutes with very low in-trap intensities. This n...

  8. Field enhancement analysis of an apertureless near field scanning optical microscope probe with finite element method

    Institute of Scientific and Technical Information of China (English)

    Weibin Chen; Qiwen Zhan

    2007-01-01

    Plasmonic field enhancement in a fully coated dielectric near field scanning optical microscope (NSOM)probe under radial polarization illumination is analyzed using an axially symmetric three-dimensional (3D)finite element method (FEM) model. The enhancement factor strongly depends on the illumination spot size, taper angle of the probe, and the metal film thickness. The tolerance of the alignment angle is investigated. Probe designs with different metal coatings and their enhancement performance are studied as well. The nanometric spot size at the tip apex and high field enhancement of the apertureless NSOM probe have important potential application in semiconductor metrology.

  9. Heterodyne method of apertureless near-field scanning optical microscopy on periodic gold nanowells.

    Energy Technology Data Exchange (ETDEWEB)

    Hall, J. E.; Wiederrecht, G. P.; Gray, S. K.; Chang, S.-H.; Jeon, S.; Rogers, J. A.; Bachelot, R.; Royer, P.; Univ. of Illinois; Univ. of Technology at Troyes; Inst. of Electro-Optical Science and Engineering

    2007-04-02

    Heterodyne detection for apertureless near-field scanning optical microscopy was used to study periodic gold nanowell arrays. Optical near-field amplitude and phase signals were obtained simultaneously with the topography of the gold nanowells and with different polarizations. Theoretical calculations of the near-fields were consistent with the experiments; in particular, the calculated amplitudes were in especially good agreement. The heterodyne method is shown to be particularly effective for these types of periodic photonic structures and other highly scattering media, which can overwhelm the near-field scattered signal when conventional apertureless near-field scanning optical microscopy is used.

  10. Polarization contrast in fluorescence scanning near-field optical microscopy in reflection

    NARCIS (Netherlands)

    Jalocha, A.; Hulst, van N.F.

    1995-01-01

    Polarization contrast is presented in fluorescence images of a Langmuir-Blodgett monolayer obtained with a scanning near-field optical microscope operated in reflection. A tapered optical fiber is used both to excite and to collect the fluorescence. The lateral resolution in the reflection fluoresce

  11. Resolution of Internal Total Reflection Scanning Near-field Optical Microscopy

    Institute of Scientific and Technical Information of China (English)

    GE Huayong; GUO Qizhi; TAN Weihan

    2002-01-01

    In this paper, the probe-sample interaction equation based on Mie′s scattering theory is derived, and the resolution of scanning near field optical microscopy is calculated numerically. The results show that the offset of far-field component to near-field component in total field plays an important role in the resolution and the size of samples also has influence on resolution.

  12. Configuration resonance in scattering scanning near-field optical microscopy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A theoretical model is proposed in order to study the configuration resonance in s-SNOM. The electromagnetic coupling between the sample and the probe tip is described with the quasi-electrostatic field theory. This method permits us to analyze the configurational resonance evoked by the interaction between the probe tip and the sample in s-SNOM intuitively.The resonant conditions for a certain system are presented in an explicit form. On the condition of considering the actual size of the sample dipoles and the probe dipole, we discuss the possibility of realizing the configurational resonance for various material samples. The numerical results indicate that the polarizability of the dielectric probe tip is too small to arouse this resonance, whereas, with the surface plasmon resonance emerging on the metallic nanoparticles, the enhanced polarizability of the metallic probe tip ensures the requirements of fulfilling the resonance.

  13. Sub-nanosecond time-resolved near-field scanning magneto-optical microscope.

    Science.gov (United States)

    Rudge, J; Xu, H; Kolthammer, J; Hong, Y K; Choi, B C

    2015-02-01

    We report on the development of a new magnetic microscope, time-resolved near-field scanning magneto-optical microscope, which combines a near-field scanning optical microscope and magneto-optical contrast. By taking advantage of the high temporal resolution of time-resolved Kerr microscope and the sub-wavelength spatial resolution of a near-field microscope, we achieved a temporal resolution of ∼50 ps and a spatial resolution of microscope, the magnetic field pulse induced gyrotropic vortex dynamics occurring in 1 μm diameter, 20 nm thick CoFeB circular disks has been investigated. The microscope provides sub-wavelength resolution magnetic images of the gyrotropic motion of the vortex core at a resonance frequency of ∼240 MHz.

  14. Chemical Silver Coating of Fiber Tips in Near-Field Scanning Optical Microscopy

    Science.gov (United States)

    Vikram, Chandra S.; Witherow, William K.

    1998-01-01

    We report what is believed to be the first experimental demonstration of silver coating by a wet chemical process on tapered fiber tips used in near-field scanning optical microscopy. The process is at room temperature and pressure and takes only a few minutes to complete. Many tips can be simultaneously coated.

  15. Imaging of apoptotic HeLa cells by using scanning near-field optical microscopy

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    By using scanning near-field optical microscopy (SNOM), HeLa cells in apoptosis process are imaged with a higher optical resolution beyond the diffraction limit. Since SNOM provides both topographic and transmitted light intensity information of a cell, it can correlate the structural characteristics and optical properties with the spatial position of the apoptotic cells. Wavelength imaging by using near-field spectroscopy shows that there is a great difference in light propagation and absorption in the cell. This unique technique can be applied to the super high resolution imaging of different components in the cell. The observations by near-field optical imaging and near-field spectroscopy indicate an inhomogeneous aggregation of the inner structure in the apoptotic HeLa cells and the change of transmission intensity of light with the apoptosis status.

  16. Observation of Amorphous Recording Marks Using Reflection-Mode Near-Field Scanning Optical Microscope Supported by Optical Interference Method

    Science.gov (United States)

    Sakai, Masaru; Mononobe, Shuji; Yusu, Keiichiro; Tadokoro, Toshiyasu; Saiki, Toshiharu

    2005-09-01

    A signal enhancing technique for a reflection-mode near-field scanning optical microscope (NSOM) is proposed. Optical interference between the signal light, from an aperture at the tip of a tapered optical fiber, and the reflected light, from a metallic coating around the aperture, enhances the signal intensity. We used a rewritable high-definition digital versatile disc (HD DVD) with dual recording layers as a sample medium, and demonstrated observation of amorphous recording marks on the semitransparent (the first) recording layer. In spite of low optical contrast between the crystal region and the amorphous region on this layer, we successfully observed recording marks with good contrast.

  17. Imaging of InGaN inhomogeneities using visible aperturelessnear-field scanning optical microscope

    Energy Technology Data Exchange (ETDEWEB)

    Stebounova, Larissa V.; Romanyuk, Yaroslav E.; Chen, Dongxue; Leone, Stephen R.

    2007-06-14

    The optical properties of epitaxially grown islands of InGaN are investigated with nanometer-scale spatial resolution using visible apertureless near-field scanning optical microscopy. Scattered light from the tip-sample system is modulated by cantilever oscillations and detected at the third harmonic of the oscillation frequency to distinguish the near-field signal from unwanted scattered background light. Scattered near-field measurements indicate that the as-grown InGaN islanded film may exhibit both inhomogeneous In composition and strain-induced changes that affect the optical signal at 633 nm and 532 nm. Changes are observed in the optical contrast for large 3D InGaN islands (100's of nm) of the same height. Near-field optical mapping of small grains on a finer scale reveals InGaN composition or strain-induced irregularities in features with heights of only 2 nm, which exhibit different near-field signals at 633 nm and 532 nm incident wavelengths. Optical signal contrast from topographic features as small as 30 nm is detected.

  18. Bow-tie optical antenna probes for single-emitter scanning near-field optical microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Farahani, Javad N [Nano-Optics Group, National Center of Competence for Research in Nanoscale Science, Institute of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Eisler, Hans-Juergen [Nano-Optics Group, National Center of Competence for Research in Nanoscale Science, Institute of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Pohl, Dieter W [Nano-Optics Group, National Center of Competence for Research in Nanoscale Science, Institute of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland); Pavius, Michael [Center of MicroNanoTechnology (CMI), Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne (Switzerland); Flueckiger, Philippe [Center of MicroNanoTechnology (CMI), Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne (Switzerland); Gasser, Philippe [EMPA, Swiss Federal Laboratories for Materials Testing and Research, Electronics/Metrology Laboratory, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Hecht, Bert [Nano-Optics Group, National Center of Competence for Research in Nanoscale Science, Institute of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel (Switzerland)

    2007-03-28

    A method for the fabrication of bow-tie optical antennas at the apex of pyramidal Si{sub 3}N{sub 4} atomic force microscopy tips is described. We demonstrate that these novel optical probes are capable of sub-wavelength imaging of single quantum dots at room temperature. The enhanced and confined optical near-field at the antenna feed gap leads to locally enhanced photoluminescence (PL) of single quantum dots. Photoluminescence quenching due to the proximity of metal is found to be insignificant. The method holds promise for single quantum emitter imaging and spectroscopy at spatial resolution limited by the engineered antenna gap width exclusively.

  19. Scattering-type scanning near-field optical microscopy with reconstruction of vertical interaction

    Science.gov (United States)

    Wang, Le; Xu, Xiaoji G.

    2015-11-01

    Scattering-type scanning near-field optical microscopy provides access to super-resolution spectroscopic imaging of the surfaces of a variety of materials and nanostructures. In addition to chemical identification, it enables observations of nano-optical phenomena, such as mid-infrared plasmons in graphene and phonon polaritons in boron nitride. Despite the high lateral spatial resolution, scattering-type near-field optical microscopy is not able to provide characteristics of near-field responses in the vertical dimension, normal to the sample surface. Here, we present an accurate and fast reconstruction method to obtain vertical characteristics of near-field interactions. For its first application, we investigated the bound electromagnetic field component of surface phonon polaritons on the surface of boron nitride nanotubes and found that it decays within 20 nm with a considerable phase change in the near-field signal. The method is expected to provide characterization of the vertical field distribution of a wide range of nano-optical materials and structures.

  20. Influence of the probe-sample interaction on scanning near-field optical microscopic images in the far field

    Institute of Scientific and Technical Information of China (English)

    Li Zhi; Zhang Jia-Sen; Yang Jing; Gong Qi-Huang

    2006-01-01

    We have studied the influence of probe-sample interaction in a scanning near-field optical microscopy (SNOM) in the far field by using samples with a step structure. For a sample with a step height of ~λ/4, the SNOM image contrast between the two sides of the step changes periodically at different scan heights. For a step height of ~λ/2, the image contrast remains approximately the same. The probe-sample interaction determines the SNOM image contrast here. The influence of different refractive indices of the sample has been also analysed by using a simple theoretical model.

  1. Near-field scanning optical microscopy in cell biology and cytogenetics.

    Science.gov (United States)

    Hausmann, Michael; Perner, Birgit; Rapp, Alexander; Wollweber, Leo; Scherthan, Harry; Greulich, Karl-Otto

    2006-01-01

    Light microscopy has proven to be one of the most versatile analytical tools in cell biology and cytogenetics. The growing spectrum of scientific knowledge demands a continuous improvement of the optical resolution of the instruments. In far-field light microscopy, the attainable resolution is dictated by the limit of diffraction, which, in practice, is about 250 nm for high-numerical-aperture objective lenses. Near-field scanning optical microscopy (NSOM) was the first technique that has overcome this limit up to about one order of magnitude. Typically, the resolution range below 100 nm is accessed for biological applications. Using appropriately designed scanning probes allows for obtaining an extremely small near-field light excitation volume (some tens of nanometers in diameter). Because of the reduction of background illumination, high contrast imaging becomes feasible for light transmission and fluorescence microscopy. The height of the scanning probe is controlled by atomic force interactions between the specimen surface and the probe tip. The control signal can be used for the production of a topographic (nonoptical) image that can be acquired simultaneously. In this chapter, the principle of NSOM is described with respect to biological applications. A brief overview of some requirements in biology and applications described in the literature are given. Practical advice is focused on instruments with aperture-type illumination probes. Preparation protocols focussing on NSOM of cell surfaces and chromosomes are presented.

  2. A Tuning Fork with a Short Fibre Probe Sensor for a Near-FieldScanning Optical Microscope

    Institute of Scientific and Technical Information of China (English)

    王沛; 鲁拥华; 章江英; 明海; 谢建平; 黄建文; 高宗圣; 蔡定平

    2002-01-01

    We report on a tapping-mode tuning fork with a short fibre probe sensor for a near-field scanning optical microscope. The method demonstrates how to fabricate the short fibre probe. This tapping-mode tuning fork with a short fibre probe can provide stable and high Q at the tapping frequency of the tuning fork, and can give high-quality near-field scanning optical microscope and atomic force microscope images of samples. We present the results of using the tapping-mode tuning fork with a short fibre probe sensor for a near-field scanning optical microscope performed on an eight-channel silica waveguide.

  3. Reciprocity theory of apertureless scanning near-field optical microscopy with point-dipole probes.

    Science.gov (United States)

    Esslinger, Moritz; Vogelgesang, Ralf

    2012-09-25

    Near-field microscopy offers the opportunity to reveal optical contrast at deep subwavelength scales. In scanning near-field optical microscopy (SNOM), the diffraction limit is overcome by a nanoscopic probe in close proximity to the sample. The interaction of the probe with the sample fields necessarily perturbs the bare sample response, and a critical issue is the interpretation of recorded signals. For a few specific SNOM configurations, individual descriptions have been modeled, but a general and intuitive framework is still lacking. Here, we give an exact formulation of the measurable signals in SNOM which is easily applicable to experimental configurations. Our results are in close analogy with the description Tersoff and Hamann have derived for the tunneling currents in scanning tunneling microscopy. For point-like scattering probe tips, such as used in apertureless SNOM, the theory simplifies dramatically to a single scalar relation. We find that the measured signal is directly proportional to the field of the coupled tip-sample system at the position of the tip. For weakly interacting probes, the model thus verifies the empirical findings that the recorded signal is proportional to the unperturbed field of the bare sample. In the more general case, it provides guidance to an intuitive and faithful interpretation of recorded images, facilitating the characterization of tip-related distortions and the evaluation of novel SNOM configurations, both for aperture-based and apertureless SNOM.

  4. Differential geometry of the ruled surfaces optically generated by mirror-scanning devices. I. Intrinsic and extrinsic properties of the scan field.

    Science.gov (United States)

    Li, Yajun

    2011-04-01

    Rectilinear propagation of light rays in homogeneous isotropic media makes it possible for optical generation of ruled surfaces as the ray is deflected by a rotatable mirror. Scan patterns on a plane or curved surface are merely curves on the ruled surface. Based on this understanding, structures of the scan fields produced by mirror-scanning devices of different configurations are investigated in terms of differential geometry. Expressions of the first and second fundamental coefficients and the first and second Gauss differential forms are given for an investigation of the intrinsic properties of the optically generated ruled surfaces. The Plücker ruled conoid is then generalized for mathematical modeling of the scan fields produced by single-mirror scanning devices of different configurations. Part II will be devoted to a study of multi-mirror scanning systems for optical generation of well-known ruled surfaces such as helicoids and hyperbolic paraboloids.

  5. Low Temperature Apertureless Near-field Scanning Optical Microscope for Optical Spectroscopy of Single Ge/Si Quantum Dots

    Science.gov (United States)

    Zhu, Henry; Patil, N. G.; Levy, Jeremy

    2001-03-01

    A low-temperature apertureless near-field scanning optical microscope has been designed and constructed for the purpose of investigating the optical properties of individual Ge/Si quantum dots. The microscope fits in the 37 mm bore of a Helium vapor magneto-optic cryostat, allowing operations down to liquid helium temperatures in magnetic fields up to 8 Tesla. An in situ microscope objective focuses light onto the sample, which is scanned in the three spatial directions using a compact modular stage. An AFM/STM tip resides on the top; feedback is achieved using a quartz tuning fork oscillator. Both tip and objective are attached to inertial sliding motors that can move in fine (10 nm) steps to achieve touchdown and focus. A femtosecond optical parametric oscillator is used to excite carriers in the quantum dots both resonantly and non-resonantly; scattered luminescence from the AFM/STM tip is collected and analyzed spectrally using a 1/2 meter imaging spectrometer and a LN_2-cooled InGaAs array. We gratefully acknowledge NSF (DMR-9701725, IMR-9802784) and DARPA (DAAD-16-99-C1036) for financial support of this work.

  6. Characterization of Line Nanopatterns on Positive Photoresist Produced by Scanning Near-Field Optical Microscope

    Directory of Open Access Journals (Sweden)

    Sadegh Mehdi Aghaei

    2015-01-01

    Full Text Available Line nanopatterns are produced on the positive photoresist by scanning near-field optical microscope (SNOM. A laser diode with a wavelength of 450 nm and a power of 250 mW as the light source and an aluminum coated nanoprobe with a 70 nm aperture at the tip apex have been employed. A neutral density filter has been used to control the exposure power of the photoresist. It is found that the changes induced by light in the photoresist can be detected by in situ shear force microscopy (ShFM, before the development of the photoresist. Scanning electron microscope (SEM images of the developed photoresist have been used to optimize the scanning speed and the power required for exposure, in order to minimize the final line width. It is shown that nanometric lines with a minimum width of 33 nm can be achieved with a scanning speed of 75 µm/s and a laser power of 113 mW. It is also revealed that the overexposure of the photoresist by continuous wave laser generated heat can be prevented by means of proper photoresist selection. In addition, the effects of multiple exposures of nanopatterns on their width and depth are investigated.

  7. Analytical analysis of modulated signal in apertureless scanning near-field optical microscopy.

    Science.gov (United States)

    Lo, Y L; Chuang, C H

    2007-11-26

    Eliminating background-scattering effects from the detected signal is crucial in improving the performance of super-high-resolution apertureless scanning near-field optical microscopy (A-SNOM). Using a simple mathematical model of the A-SNOM detected signal, this study explores the respective effects of the phase modulation depth, the wavelength and angle of the incident light, and the amplitude of the tip vibration on the signal contrast and signal intensity. In general, the results show that the background-noise decays as the order of the Bessel function increases and that higher-order harmonic frequencies yield an improved signal contrast. Additionally, it is found that incident light with a longer wavelength improves the signal contrast for a constant order of modulation frequency. The signal contrast can also be improved by reducing the incident angle of the incident light. Finally, it is demonstrated that sample stage scanning yields an improved imaging result. However, tip scanning provides a reasonable low-cost and faster solution in the smaller scan area. The analytical results presented in this study enable a better understanding of the complex detected signal in A-SNOM and provide insights into methods of improving the signal contrast of the A-SNOM measurement.

  8. Light propagation studies on laser modified waveguides using scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Borrise, X.; Berini, Abadal Gabriel; Jimenez, D.

    2001-01-01

    By means of direct laser writing on Al, a new method to locally modify optical waveguides is proposed. This technique has been applied to silicon nitride waveguides, allowing modifications of the optical propagation along the guide. To study the formed structures, a scanning near-held optical...

  9. Laser-based technology of scanning near-field optical probes fabrication: study of kinetics and progress of measuring

    Science.gov (United States)

    Veiko, Vadim P.; Kalachev, Alexey I.; Kaporsky, Lev N.; Volkov, Sergey A.; Voznesensky, Nikolay B.

    2003-02-01

    Basic principles of laser assisted process of fiber etching for scanning near-field optical (SNO) probes formation and control technique are presented. The thermal and temporal regimes are considered in order to provide stable reproducibility and high quality of a tapered end of the optical fiber. Problems of adequate definition of the scanning imaging properties of a SNO probe are discussed. Thus an optical method of far-field registration and processing together with a new autoelectronic emission method are considered for solution of the task of a subwavelength SNO probe aperture measurement and estimation of its apparatus function.

  10. Scanning laser polarimetry, but not optical coherence tomography predicts permanent visual field loss in acute nonarteritic anterior ischemic optic neuropathy.

    Science.gov (United States)

    Kupersmith, Mark J; Anderson, Susan; Durbin, Mary; Kardon, Randy

    2013-08-15

    Scanning laser polarimetry (SLP) reveals abnormal retardance of birefringence in locations of the edematous peripapillary retinal nerve fiber layer (RNFL), which appear thickened by optical coherence tomography (OCT), in nonarteritic anterior ischemic optic neuropathy (NAION). We hypothesize initial sector SLP RNFL abnormalities will correlate with long-term regional visual field loss due to ischemic injury. We prospectively performed automated perimetry, SLP, and high definition OCT (HD-OCT) of the RNFL in 25 eyes with acute NAION. We grouped visual field threshold and RNFL values into Garway-Heath inferior/superior disc sectors and corresponding superior/inferior field regions. We compared sector SLP RNFL thickness with corresponding visual field values at presentation and at >3 months. At presentation, 12 eyes had superior sector SLP reduction, 11 of which had inferior field loss. Six eyes, all with superior field loss, had inferior sector SLP reduction. No eyes had reduced OCT-derived RNFL acutely. Eyes with abnormal field regions had corresponding SLP sectors thinner (P = 0.003) than for sectors with normal field regions. During the acute phase, the SLP-derived sector correlated with presentation (r = 0.59, P = 0.02) and with >3-month after presentation (r = 0.44, P = 0.02) corresponding superior and inferior field thresholds. Abnormal RNFL birefringence occurs in sectors corresponding to regional visual field loss during acute NAION when OCT-derived RNFL shows thickening. Since the visual field deficits show no significant recovery, SLP can be an early marker for axonal injury, which may be used to assess recovery potential at RNFL locations with respect to new treatments for acute NAION.

  11. Dual wavelength fluorescent ratiometric pH measurement by scanning near-field optical microscopy

    Science.gov (United States)

    Li, Yongbo; Shinohara, Ryosuke; Iwami, Kentaro; Ohta, Yoshihiro; Umeda, Norihiro

    2010-08-01

    A novel method to observe pH distribution by dual wavelength fluorescent ratiometric pH measurement by scanning near-field optical microscopy (SNOM) is developed. In this method, in order to investigate not only the pH of mitochondrial membrane but also its distribution in the vicinity, a pH sensitive fluorescent reagent covers mitochondria instead of injecting it to mitochondria. This method utilizes a dual-emission pH sensitive dye and SNOM with a themally-pulled and metal-coated optical fiber to improve the spatial resolution. Time-dependence of Fluorescent intensity ratio (FIR) under acid addition is investigated. As the distances between the dropped point and the SNOM probe becomes closer, the time when FIR changes becomes earlier. The response of mitochondria under supplement of nutrition is studied by using this method. While the probe is near to mitochondria, the ratio quickly becomes to increase. In conclusion, it was confirmed that the temporal variation of pH can be detected by this method, and pH distribution in the vicinity of mitochondria is able to be measured by this method.

  12. Scanning near-field optical microscopy on rough surfaces: applications in chemistry, biology, and medicine

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available Shear-force apertureless scanning near-field optical microscopy (SNOM with very sharp uncoated tapered waveguides relies on the unexpected enhancement of reflection in the shear-force gap. It is the technique for obtaining chemical (materials contrast in the optical image of “real world” surfaces that are rough and very rough without topographical artifacts, and it is by far less complicated than other SNOM techniques that can only be used for very flat surfaces. The experimental use of the new photophysical effect is described. The applications of the new technique are manifold. Important mechanistic questions in solid-state chemistry (oxidation, diazotization, photodimerization, surface hydration, hydrolysis are answered with respect to simultaneous AFM (atomic force microscopy and detailed crystal packing. Prehistoric petrified bacteria and concomitant pyrite inclusions are also investigated with local RAMAN SNOM. Polymer beads and unstained biological objects (rabbit heart, shrimp eye allow for nanoscopic analysis of cell organelles. Similarly, human teeth and a cancerous tissue are analyzed. Bladder cancer tissue is clearly differentiated from healthy tissue without staining and this opens a new highly promising diagnostic tool for precancer diagnosis. Industrial applications are demonstrated at the corrosion behavior of dental alloys (withdrawal of a widely used alloy, harmless substitutes, improvement of paper glazing, behavior of blood bags upon storage, quality assessment of metal particle preparations for surface enhanced RAMAN spectroscopy, and determination of diffusion coefficient and light fastness in textile fiber dyeing. The latter applications include fluorescence SNOM. Local fluorescence SNOM is also used in the study of partly aggregating dye nanoparticles within resin/varnish preparations. Unexpected new insights are obtained in all of the various fields that cannot be obtained by other techniques.

  13. Direct characterization of ultraviolet-light-induced refractive index structures by scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Svalgaard, Mikael; Madsen, S.; Hvam, Jørn Märcher;

    1998-01-01

    We have applied a reflection scanning near-field optical microscope to directly probe ultraviolet (UV)-light-induced refractive index structures in planar glass samples. This technique permits direct comparison between topography and refractive index changes (10(-5)-10(-3)) with submicrometer...

  14. Investigation of optical nanostructures for photovoltaics with near-field scanning microscopy; Untersuchung optischer Nanostrukturen fuer die Photovoltaik mit Nahfeldmikroskopie

    Energy Technology Data Exchange (ETDEWEB)

    Beckers, Thomas

    2011-09-26

    Textured and rough surfaces are known to increase light trapping in solar cells significantly. The development and optimization of these nano-structures is essential to improve the energy conversion efficiency of thin-film solar cells. In the past, first research approaches covered classical and macroscopic investigations, e.g. determining the haze or angularly resolved scattering. These methods do not provide precise explanation for the optical improvement of the devices, because layer thicknesses and structure sizes in thin-film solar cells are smaller than the wavelength of visible light. The impact of local nano-structures and their contribution to the local absorption enhancement is not resolved by macroscopic measurements. In this thesis, near-field scanning optical microscopy is introduced as first near-field investigations of nano-structures for photovoltaics. This provides an insight into local optical effects for relevant surfaces of photovoltaic devices. Investigating the distribution of the electric fields in layer stacks is crucial to understand the absorption in solar cells. Evanescent fields, which occur due to total internal reflection at the interfaces, are measurable by near-field scanning optical microscopy and yield important information about local light trapping. Within the framework of this thesis, correlations between local surface structures and optical near-field effects are shown. In this case structure features of randomly textured surfaces, which optimize local light trapping, are identified. It paves the way to connect microscopic optical effects on the surface with the macroscopic performance of thin-film solar cells. Moreover, the measurement yields a 3D illustration of the electric field distribution over the sample surface. It is an important criterion to prove the results of rigorous diffraction theory. An excellent agreement between experiment and simulation is found. The simulations provide an insight into the material, which is

  15. Adaptive Optical Scanning Holography

    Science.gov (United States)

    Tsang, P. W. M.; Poon, Ting-Chung; Liu, J.-P.

    2016-01-01

    Optical Scanning Holography (OSH) is a powerful technique that employs a single-pixel sensor and a row-by-row scanning mechanism to capture the hologram of a wide-view, three-dimensional object. However, the time required to acquire a hologram with OSH is rather lengthy. In this paper, we propose an enhanced framework, which is referred to as Adaptive OSH (AOSH), to shorten the holographic recording process. We have demonstrated that the AOSH method is capable of decreasing the acquisition time by up to an order of magnitude, while preserving the content of the hologram favorably. PMID:26916866

  16. Laser fabrication of gold nanoparticle clustered tips for use in apertureless near-field scanning optical microscopy.

    Science.gov (United States)

    Park, Kyoung-Duck; Park, Jung Su; Park, Jin-Ho; Ahn, Tae Kyu; Lee, Young Hee; Jeong, Mun Seok

    2014-08-01

    A laser fabrication method was developed to make gold nanoparticle clustered (GNC) tips for apertureless near-field scanning optical microscopes (ANSOMs) and tip-enhanced Raman spectroscopy (TERS). The near-field Rayleigh and Raman scattering of samples are highly enhanced when a gold nanoparticle cluster is synthesized on the end of the tip. This is due to the lightning rod effect in the sharp tips. The localized electromagnetic field enhancement and the spatial resolution (~30 nm) of the fabricated GNC tip were verified by TERS and ANSOM measurements of carbon nanotubes.

  17. Oxidation of hydrogen-passivated silicon surfaces by scanning near-field optical lithography using uncoated and aluminum-coated fiber probes

    DEFF Research Database (Denmark)

    Madsen, Steen; Bozhevolnyi, Sergey I.; Birkelund, Karen

    1997-01-01

    Optically induced oxidation of hydrogen-passivated silicon surfaces using a scanning near-field optical microscope was achieved with both uncoated and aluminum-coated fiber probes. Line scans on amorphous silicon using uncoated fiber probes display a three-peak profile after etching in potassium...

  18. Optical method for distance and displacement measurements of the probe-sample separation in a scanning near-field optical microscope

    Energy Technology Data Exchange (ETDEWEB)

    Santamaria, L.; Siller, H. R. [Tecnológico de Monterrey, Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849 (Mexico); Garcia-Ortiz, C. E., E-mail: cegarcia@cicese.mx [CONACYT Research Fellow – CICESE, Unidad Monterrey, Alianza Centro 504, Apodaca, NL, 66629 (Mexico); Cortes, R.; Coello, V. [CICESE, Unidad Monterrey, PIIT, Alianza Centro 504, Apodaca, NL, 66629 (Mexico)

    2016-04-15

    In this work, we present an alternative optical method to determine the probe-sample separation distance in a scanning near-field optical microscope. The experimental method is based in a Lloyd’s mirror interferometer and offers a measurement precision deviation of ∼100 nm using digital image processing and numerical analysis. The technique can also be strategically combined with the characterization of piezoelectric actuators and stability evaluation of the optical system. It also opens the possibility for the development of an automatic approximation control system valid for probe-sample distances from 5 to 500 μm.

  19. Hollow-pyramid based scanning near-field optical microscope coupled to femtosecond pulses: A tool for nonlinear optics at the nanoscale

    Science.gov (United States)

    Celebrano, Michele; Biagioni, Paolo; Zavelani-Rossi, Margherita; Polli, Dario; Labardi, Massimiliano; Allegrini, Maria; Finazzi, Marco; Duò, Lamberto; Cerullo, Giulio

    2009-03-01

    We describe an aperture scanning near-field optical microscope (SNOM) using cantilevered hollow pyramid probes coupled to femtosecond laser pulses. Such probes, with respect to tapered optical fibers, present higher throughput and laser power damage threshold, as well as greater mechanical robustness. In addition, they preserve pulse duration and polarization in the near field. The instrument can operate in two configurations: illumination mode, in which the SNOM probe is used to excite the nonlinear response in the near field, and collection mode, where it collects the nonlinear emission following far-field excitation. We present application examples highlighting the capability of the system to observe the nonlinear optical response of nanostructured metal surfaces (gold projection patterns and gold nanorods) with sub-100-nm spatial resolution.

  20. Use of scanning near-field optical microscope with an aperture probe for detection of luminescent nanodiamonds

    Science.gov (United States)

    Shershulin, V. A.; Samoylenko, S. R.; Shenderova, O. A.; Konov, V. I.; Vlasov, I. I.

    2017-02-01

    The suitability of scanning near-field optical microscopy (SNOM) to image photoluminescent diamond nanoparticles with nanoscale resolution is demonstrated. Isolated diamond nanocrystals with an average size of 100 nm, containing negatively charged nitrogen-vacancy (NV-) centers, were chosen as tested material. The NV- luminescence was stimulated by continuous 532 nm laser light. Sizes of analyzed crystallites were monitored by an atomic force microscope. The lateral resolution of the order of 100 nm was reached in SNOM imaging of diamond nanoparticles using 150 nm square aperture of the probe.

  1. Stroboscobic near-field scanning optical microscopy for 3D mapping of mode profiles of plasmonic nanostructures (Conference Presentation)

    Science.gov (United States)

    Dana, Aykutlu; Ozgur, Erol; Torunoglu, Gamze

    2016-09-01

    We present a dynamic approach to scanning near field optical microscopy that extends the measurement technique to the third dimension, by strobing the illumination in sync with the cantilever oscillation. Nitrogen vacancy (NV) centers in nanodiamonds placed on cantilever tips are used as stable emitters for emission enhancement. Local field enhancement and modulation of optical density states are mapped in three dimensions based on fluorescence intensity and spectrum changes as the tip is scanned over plasmonic nanostructures. The excitation of NV centers is done using a total internal reflection setup. Using a digital phase locked loop to pulse the excitation in various tip sample separations, 2D slices of fluorescence enhancement can be recorded. Alternatively, a conventional SNOM tip can be used to selectively couple wideband excitation to the collection path, with subdiffraction resolution of 60 nm in x and y and 10 nm in z directions. The approach solves the problem of tip-sample separation stabilization over extended periods of measurement time, required to collect data resolved in emission wavelength and three spatial dimensions. The method can provide a unique way of accessing the three dimensional field and mode profiles of nanophotonics structures.

  2. Observation of nonlinear bands in near-field scanning optical microscopy of a photonic-crystal waveguide

    CERN Document Server

    Singh, Amandev; Huisman, Simon R; Korterik, Jeroen P; Mosk, Allard P; Herek, Jennifer L; Pinkse, Pepijn W H

    2014-01-01

    We have measured the photonic bandstructure of GaAs photonic-crystal waveguides with high energy and momentum resolution using near-field scanning optical microscopy. Intriguingly, we observe additional bands that are not predicted by eigenmode solvers, as was recently demonstrated by Huisman et al. [Phys. Rev. B 86, 155154 (2012)]. We study the presence of these additional bands by performing measurements of these bands while varying the incident light power, revealing a non-linear power dependence. Here, we demonstrate experimentally and theoretically that the observed additional bands are caused by a waveguide-specific near- field tip effect not previously reported, which can significantly phase-modulate the detected field.

  3. Handbook of optical and laser scanning

    CERN Document Server

    Marshall, Gerald F

    2011-01-01

    From its initial publication titled Laser Beam Scanning in 1985 to Handbook of Optical and Laser Scanning, now in its second edition, this reference has kept professionals and students at the forefront of optical scanning technology. Carefully and meticulously updated in each iteration, the book continues to be the most comprehensive scanning resource on the market. It examines the breadth and depth of subtopics in the field from a variety of perspectives. The Second Edition covers: Technologies such as piezoelectric devices Applications of laser scanning such as Ladar (laser radar) Underwater

  4. Scan-less, line-field confocal microscopy by combination of wavelength/space conversion with dual optical comb

    Science.gov (United States)

    Yasui, Takeshi; Hase, Eiji; Miyamoto, Shuji; Hsieh, Yi-Da; Minamikawa, Takeo; Yamamoto, Hirotsugu

    2016-03-01

    Optical frequency comb (OFC) has attracted attentions for optical frequency metrology in visible and infrared regions because the mode-resolved OFC spectrum can be used as a precise frequency ruler due to both characteristics of broadband radiation and narrow-line CW radiation. Furthermore, the absolute accuracy of all frequency modes in OFC is secured by phase-locking a repetition frequency frep and a carrier-envelope-offset frequency fceo to a frequency standard. However, application fields of OFC other than optical frequency metrology are still undeveloped. One interesting aspect of OFC except for the frequency ruler is optical carrier having a huge number of discrete frequency channels because OFC is composed of a series of frequency spikes regularly separated by frep in the broad spectral range. If a certain quantity to be measured is encoded on each comb mode by dimensional conversion, a huge number of data for the measured quantity can be obtained from a single mode-resolved spectrum of OFC. In this paper, we encode the confocal microscopic line-image of a sample on the mode-resolved OFC spectrum by the dimensional conversion between wavelength and 1D-space. The resulting image-encoded OFC spectrum is acquired by an optical spectrum analyzer or dual comb spectrometer. Finally, the line image of the sample is decoded from the spectral amplitude of the mode-resolved OFC spectrum. The combination of OFC with the dimensional conversion enables to establish both confocal modality and line-field imaging under the scan-less condition.

  5. Evaluation of baseline structural factors for predicting glaucomatous visual-field progression using optical coherence tomography, scanning laser polarimetry and confocal scanning laser ophthalmoscopy.

    Science.gov (United States)

    Sehi, M; Bhardwaj, N; Chung, Y S; Greenfield, D S

    2012-12-01

    The objective of this study is to assess whether baseline optic nerve head (ONH) topography and retinal nerve fiber layer thickness (RNFLT) are predictive of glaucomatous visual-field progression in glaucoma suspect (GS) and glaucomatous eyes, and to calculate the level of risk associated with each of these parameters. Participants with ≥28 months of follow-up were recruited from the longitudinal Advanced Imaging for Glaucoma Study. All eyes underwent standard automated perimetry (SAP), confocal scanning laser ophthalmoscopy (CSLO), time-domain optical coherence tomography (TDOCT), and scanning laser polarimetry using enhanced corneal compensation (SLPECC) every 6 months. Visual-field progression was assessed using pointwise linear-regression analysis of SAP sensitivity values (progressor) and defined as significant sensitivity loss of >1 dB/year at ≥2 adjacent test locations in the same hemifield at P<0.01. Cox proportional hazard ratios (HR) were calculated to determine the predictive ability of baseline ONH and RNFL parameters for SAP progression using univariate and multivariate models. Seventy-three eyes of 73 patients (43 GS and 30 glaucoma, mean age 63.2±9.5 years) were enrolled (mean follow-up 51.5±11.3 months). Four of 43 GS (9.3%) and 6 of 30 (20%) glaucomatous eyes demonstrated progression. Mean time to progression was 50.8±11.4 months. Using multivariate models, abnormal CSLO temporal-inferior Moorfields classification (HR=3.76, 95% confidence interval (CI): 1.02-6.80, P=0.04), SLPECC inferior RNFLT (per -1 μm, HR=1.38, 95% CI: 1.02-2.2, P=0.02), and TDOCT inferior RNFLT (per -1 μm, HR=1.11, 95% CI: 1.04-1.2, P=0.001) had significant HRs for SAP progression. Abnormal baseline ONH topography and reduced inferior RNFL are predictive of SAP progression in GS and glaucomatous eyes.

  6. Remote optical sensing on the nanometer scale with a bowtie aperture nano-antenna on a fiber tip of scanning near-field optical microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Atie, Elie M.; Xie, Zhihua; El Eter, Ali; Salut, Roland; Baida, Fadi I.; Grosjean, Thierry, E-mail: thierry.grosjean@univ-fcomte.fr [Institut FEMTO-ST, UMR CNRS 6174, Université de Franche-Comté, Département d' Optique P.M. Duffieux, 15B avenue des Montboucons, 25030 Besançon cedex (France); Nedeljkovic, Dusan [Lovalite s.a.s., 7 rue Xavier Marmier, 25000 Besançon (France); Tannous, Tony [Department of Physics, University of Balamand, P.O. Box 100 Tripoli (Lebanon)

    2015-04-13

    Plasmonic nano-antennas have proven the outstanding ability of sensing chemical and physical processes down to the nanometer scale. Sensing is usually achieved within the highly confined optical fields generated resonantly by the nano-antennas, i.e., in contact to the nanostructures. In this paper, we demonstrate the sensing capability of nano-antennas to their larger scale environment, well beyond their plasmonic confinement volume, leading to the concept of “remote” (non contact) sensing on the nanometer scale. On the basis of a bowtie-aperture nano-antenna (BNA) integrated at the apex of a SNOM (Scanning Near-field Optical Microscopy) fiber tip, we introduce an ultra-compact, moveable, and background-free optical nanosensor for the remote sensing of a silicon surface (up to distance of 300 nm). Sensitivity of the BNA to its large scale environment is high enough to expect the monitoring and control of the spacing between the nano-antenna and a silicon surface with sub-nanometer accuracy. This work paves the way towards an alternative class of nanopositioning techniques, based on the monitoring of diffraction-free plasmon resonance, that are alternative to nanomechanical and diffraction-limited optical interference-based devices.

  7. Remote optical sensing on the nanometer scale with a bowtie aperture nano-antenna on a fiber tip of scanning near-field optical microscopy

    Science.gov (United States)

    Atie, Elie M.; Xie, Zhihua; El Eter, Ali; Salut, Roland; Nedeljkovic, Dusan; Tannous, Tony; Baida, Fadi I.; Grosjean, Thierry

    2015-04-01

    Plasmonic nano-antennas have proven the outstanding ability of sensing chemical and physical processes down to the nanometer scale. Sensing is usually achieved within the highly confined optical fields generated resonantly by the nano-antennas, i.e., in contact to the nanostructures. In this paper, we demonstrate the sensing capability of nano-antennas to their larger scale environment, well beyond their plasmonic confinement volume, leading to the concept of "remote" (non contact) sensing on the nanometer scale. On the basis of a bowtie-aperture nano-antenna (BNA) integrated at the apex of a SNOM (Scanning Near-field Optical Microscopy) fiber tip, we introduce an ultra-compact, moveable, and background-free optical nanosensor for the remote sensing of a silicon surface (up to distance of 300 nm). Sensitivity of the BNA to its large scale environment is high enough to expect the monitoring and control of the spacing between the nano-antenna and a silicon surface with sub-nanometer accuracy. This work paves the way towards an alternative class of nanopositioning techniques, based on the monitoring of diffraction-free plasmon resonance, that are alternative to nanomechanical and diffraction-limited optical interference-based devices.

  8. Quantum dots for multiplexed detection and characterisation of prostate cancer cells using a scanning near-field optical microscope.

    Directory of Open Access Journals (Sweden)

    Kelly-Ann D Walker

    Full Text Available In this study scanning near-field optical microscopy (SNOM has been utilised in conjunction with quantum dot labelling to interrogate the biomolecular composition of cell membranes. The technique overcomes the limits of optical diffraction found in standard fluorescence microscopy and also yields vital topographic information. The technique has been applied to investigate cell-cell adhesion in human epithelial cells. This has been realised through immunofluorescence labelling of the cell-cell adhesion protein E-cadherin. Moreover, a dual labelling protocol has been optimised to facilitate a comparative study of the adhesion mechanisms and the effect of aberrant adhesion protein expression in both healthy and cancerous epithelial cells. This study reports clear differences in the morphology and phenotype of healthy and cancerous cells. In healthy prostate epithelial cells (PNT2, E-cadherin was predominantly located around the cell periphery and within filopodial extensions. The presence of E-cadherin appeared to be enhanced when cell-cell contact was established. In contrast, examination of metastatic prostate adenocarcinoma cells (PC-3 revealed no E-cadherin labelling around the periphery of the cells. This lack of functional E-cadherin in PC-3 cells coincided with a markedly different morphology and PC-3 cells were not found to form close cell-cell associations with their neighbours. We have demonstrated that with a fully optimised sample preparation methodology, multiplexed quantum dot labelling in conjunction with SNOM imaging can be successfully applied to interrogate biomolecular localisation within delicate cellular membranes.

  9. High throughput optical lithography by scanning a massive array of bowtie aperture antennas at near-field.

    Science.gov (United States)

    Wen, X; Datta, A; Traverso, L M; Pan, L; Xu, X; Moon, E E

    2015-11-03

    Optical lithography, the enabling process for defining features, has been widely used in semiconductor industry and many other nanotechnology applications. Advances of nanotechnology require developments of high-throughput optical lithography capabilities to overcome the optical diffraction limit and meet the ever-decreasing device dimensions. We report our recent experimental advancements to scale up diffraction unlimited optical lithography in a massive scale using the near field nanolithography capabilities of bowtie apertures. A record number of near-field optical elements, an array of 1,024 bowtie antenna apertures, are simultaneously employed to generate a large number of patterns by carefully controlling their working distances over the entire array using an optical gap metrology system. Our experimental results reiterated the ability of using massively-parallel near-field devices to achieve high-throughput optical nanolithography, which can be promising for many important nanotechnology applications such as computation, data storage, communication, and energy.

  10. High throughput optical lithography by scanning a massive array of bowtie aperture antennas at near-field

    Science.gov (United States)

    Wen, X.; Datta, A.; Traverso, L. M.; Pan, L.; Xu, X.; Moon, E. E.

    2015-11-01

    Optical lithography, the enabling process for defining features, has been widely used in semiconductor industry and many other nanotechnology applications. Advances of nanotechnology require developments of high-throughput optical lithography capabilities to overcome the optical diffraction limit and meet the ever-decreasing device dimensions. We report our recent experimental advancements to scale up diffraction unlimited optical lithography in a massive scale using the near field nanolithography capabilities of bowtie apertures. A record number of near-field optical elements, an array of 1,024 bowtie antenna apertures, are simultaneously employed to generate a large number of patterns by carefully controlling their working distances over the entire array using an optical gap metrology system. Our experimental results reiterated the ability of using massively-parallel near-field devices to achieve high-throughput optical nanolithography, which can be promising for many important nanotechnology applications such as computation, data storage, communication, and energy.

  11. Development of near-field scanning microwave and optical dual probe: Application to characterization of high-T(c) superconductors

    Science.gov (United States)

    Aga, Roberto Sabas, Jr.

    In this dissertation, a novel dual-channel near-field scanning microwave and optical microprobe (NSMM/NSOM) was developed for simultaneous mapping of microwave and optical properties of a sample at microscopic scales. This microprobe is composed of an open-end coaxial resonator with its center conductor being replaced by a stainless steel tube terminated by a titanium/silver coated fiber optic with a tapered tip. The optical fiber serves as the channel for NSOM, while its metal coating is the channel for NSMM. Using this dual-channel NSMM/NSOM probe, a spatial resolution of ˜5 mum, that is comparable to the best reported for single-channel NSMM, has been achieved on metallic samples. This resolution is mainly limited by the sensitivity of the NSMM channel and may be further improved when the sensitivity of NSMM is enhanced. Characterization of the microwave properties of the highest-Tc Hg-based superconductors has been carried out using a traditional resonant cavity technique, as well as a novel single-channel NSMM and the dual-channel NSMM/NSOM. Using the traditional technique, the microwave surface resistance (Rs) and power handling capability (Pc) of HgBa 2CaCu2O6 (Hg-1212 with Tc ˜ 125 K) films have been measured for the first time, and the results are superior to the best achieved on other superconductors. For example, a comparable R s ˜ 0.3 mO (10 GHz) can be obtained on Hg-1212 at close to 120 K as opposed to the same Rs for YBa2Cu3O 7 (the most popular high-Tc superconductor with Tc ˜ 92 K) at around 77K. This can be attributed to the large difference in the Tcs between the two materials and has demonstrated the potential of Hg-1212 for microwave applications. A comparison of the microwave properties of Hg-1212, Tl-2212 and YBCO films at reduced temperature scale suggested further room for improvement of Hg-1212 performance. Using NSMM, the localized microwave properties, such as Tcs, sheet resistance and power handling capability have been investigated

  12. An imaging dataset of cervical cells using scanning near-field optical microscopy coupled to an infrared free electron laser

    Science.gov (United States)

    Halliwell, Diane E.; Morais, Camilo L. M.; Lima, Kássio M. G.; Trevisan, Júlio; Siggel-King, Michele R. F.; Craig, Tim; Ingham, James; Martin, David S.; Heys, Kelly; Kyrgiou, Maria; Mitra, Anita; Paraskevaidis, Evangelos; Theophilou, Georgios; Martin-Hirsch, Pierre L.; Cricenti, Antonio; Luce, Marco; Weightman, Peter; Martin, Francis L.

    2017-07-01

    Using a scanning near-field optical microscope coupled to an infrared free electron laser (SNOM-IR-FEL) in low-resolution transmission mode, we collected chemical data from whole cervical cells obtained from 5 pre-menopausal, non-pregnant women of reproductive age, and cytologically classified as normal or with different grades of cervical cell dyskaryosis. Imaging data are complemented by demography. All samples were collected before any treatment. Spectra were also collected using attenuated total reflection, Fourier-transform (ATR-FTIR) spectroscopy, to investigate the differences between the two techniques. Results of this pilot study suggests SNOM-IR-FEL may be able to distinguish cervical abnormalities based upon changes in the chemical profiles for each grade of dyskaryosis at designated wavelengths associated with DNA, Amide I/II, and lipids. The novel data sets are the first collected using SNOM-IR-FEL in transmission mode at the ALICE facility (UK), and obtained using whole cells as opposed to tissue sections, thus providing an 'intact' chemical profile. These data sets are suited to complementing future work on image analysis, and/or applying the newly developed algorithm to other datasets collected using the SNOM-IR-FEL approach.

  13. Second-harmonic scanning optical microscopy of semiconductor quantum dots

    DEFF Research Database (Denmark)

    Vohnsen, B.; Bozhevolnyi, S.I.; Pedersen, K.;

    2001-01-01

    Second-harmonic (SH) optical imaging of self-assembled InAlGaAs quantum dots (QD's) grown on a GaAs(0 0 1) substrate has been accomplished at room temperature by use of respectively a scanning far-field optical microscope in reflection mode and a scanning near-field optical microscope...

  14. Near-field Optical Microscopy

    NARCIS (Netherlands)

    Ruiter, A.G.T.

    1997-01-01

    Near-field scanning optical microscopy (NSOM) is one of the most recent scanning probe techniques. In this technique, an optical probe is brought in the vicinity of the sample surface, in the near-field zone. The microscope can either work in illumination mode, in which the probe consists of a

  15. Near-field Optical Microscopy

    NARCIS (Netherlands)

    Ruiter, Anthonius Gerardus Theodorus

    1997-01-01

    Near-field scanning optical microscopy (NSOM) is one of the most recent scanning probe techniques. In this technique, an optical probe is brought in the vicinity of the sample surface, in the near-field zone. The microscope can either work in illumination mode, in which the probe consists of a sub-w

  16. Micromachined microscanners for optical scanning

    Science.gov (United States)

    Kiang, Meng-Hsiung; Solgaard, Olav; Muller, Richard S.; Lau, Kam Y.

    1997-04-01

    We present the design and fabrication of surface- micromachined electrostatic-comb driven microscanners that have high angular precision over a large scan angle. When used as resonant scanners, these mirrors have fast scan rates with very low operating power. We use polysilicon microhinges, which allow the micromirrors to be lifted out of the plane of the substrate after processing is completed, to create high-aspect-ratio optical surfaces with dimensions in the hundreds of micrometers s while taking advantage of the planar surface-micromachining processing technology. Microscanners that are capable of high-speed scanning over large scan angles with high precision have been fabricated. Application of these actuated micromirrors in laser barcode scanning and optical-fiber switches have been demonstrated. These single-mirror scanners can be combined to form more complicated microscanners such as a two-mirror, two-axis raster scanner that have a wide range of applications in areas such as medicine, displays, printing, data storage, and communications.

  17. Optical characterication of probes for photon scanning tunnelling microscopy

    DEFF Research Database (Denmark)

    Vohnsen, Brian; Bozhevolnyi, Sergey I.

    1999-01-01

    The photon scanning tunnelling microscope is a well-established member of the family of scanning near-field optical microscopes used for optical imaging at the sub-wavelength scale. The quality of the probes, typically pointed uncoated optical fibres, used is however difficult to evaluate...

  18. SEMICONDUCTOR DEVICES Thermal analysis of the cavity facet for an 808 nm semiconductor laser by using near-field scanning optical microscopy

    Science.gov (United States)

    Lan, Rao; Guofeng, Song; Lianghui, Chen

    2010-10-01

    In order to analyze the thermal characteristics of the cavity facet of a semiconductor laser, a home-built near-field scanning optical microscopy (NSOM) is employed to probe the topography of the facet. By comparing the topographic images of two samples under different DC current injections, we can find that the thermal characteristic is related to its lifetime. We show that it is possible to predict the lifetime of the semiconductor laser diode with non-destructive tests.

  19. High Throughput Optical Lithography by Scanning a Massive Array of Bowtie Aperture Antennas at Near-Field

    Science.gov (United States)

    2015-11-03

    near-field gap distance. The ISPI system uses a different wavelength of laser light that is insensitive to the photoresist to avoid interfering with the...subsequent fine alignment and gap control. In the lithography system, a frequency-tripled diode-pumped solid state UV laser (wavelength = 355 nm...1.57 μ J/cm2 and a linear scanning speed of 1 μ m/s. This higher laser fluence was used to ensure patterns are produced by all the antennas since

  20. A study of the magnetic field distribution in an Ag-sheathed Bi2223 tape using scanning Hall sensor and magneto-optical techniques

    Science.gov (United States)

    Kawano, K.; Abell, J. S.; Ohtake, A.; Oota, A.

    2000-09-01

    Using both magneto-optical (MO) and scanning Hall sensor techniques, magnetic field distributions have been observed in a superconducting Ag-sheathed Bi2223 monofilamentary tape in the presence of an external magnetic field. Application of the inversion scheme to the MO contrast has allowed the two-dimensional current distribution to be determined. The Hall sensor measurements indicate that the current distribution in the core depends on the applied external field, and the current flows mainly at the edge of the core in a high external field. The magnetic line profiles across the width of the tape have been analysed by a numerical calculation by modelling the current loops based on the two-dimensional current distribution from the MO image. The analysis shows that an increase in the external field limits and narrows the current flow region from the whole of the core to the edge.

  1. A study of the magnetic field distribution in an Ag-sheathed Bi2223 tape using scanning Hall sensor and magneto-optical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Kawano, K. [School of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT (United Kingdom). E-mail: k.kawano at bham.ac.uk; Abell, J.S. [School of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT (United Kingdom); Ohtake, A.; Oota, A. [Department of Electrical and Electronic Engineering, Toyohashi University of Technology, Tempaku-cho, Toyohashi, Aichi 441-8580 (Japan)

    2000-09-01

    Using both magneto-optical (MO) and scanning Hall sensor techniques, magnetic field distributions have been observed in a superconducting Ag-sheathed Bi2223 monofilamentary tape in the presence of an external magnetic field. Application of the inversion scheme to the MO contrast has allowed the two-dimensional current distribution to be determined. The Hall sensor measurements indicate that the current distribution in the core depends on the applied external field, and the current flows mainly at the edge of the core in a high external field. The magnetic line profiles across the width of the tape have been analysed by a numerical calculation by modelling the current loops based on the two-dimensional current distribution from the MO image. The analysis shows that an increase in the external field limits and narrows the current flow region from the whole of the core to the edge. (author)

  2. Local detection efficiency of a NbN superconducting single photon detector explored by a scattering scanning near-field optical microscope.

    Science.gov (United States)

    Wang, Qiang; Renema, Jelmer J; Engel, Andreas; van Exter, Martin P; de Dood, Michiel J A

    2015-09-21

    We propose an experiment to directly probe the local response of a superconducting single photon detector using a sharp metal tip in a scattering scanning near-field optical microscope. The optical absorption is obtained by simulating the tip-detector system, where the tip-detector is illuminated from the side, with the tip functioning as an optical antenna. The local detection efficiency is calculated by considering the recently introduced position-dependent threshold current in the detector. The calculated response for a 150 nm wide detector shows a peak close to the edge that can be spatially resolved with an estimated resolution of ∼ 20 nm, using a tip with parameters that are experimentally accessible.

  3. Diffraction by a small aperture in conical geometry: Application to metal coated tips used in near-field scanning optical microscopy

    CERN Document Server

    Drezet, A; Huant, S; 10.1103/PhysRevE.65.046611

    2010-01-01

    Light diffraction through a subwavelength aperture located at the apex of a metallic screen with conical geometry is investigated theoretically. A method based on a multipole field expansion is developed to solve Maxwell's equations analytically using boundary conditions adapted both for the conical geometry and for the finite conductivity of a real metal. The topological properties of the diffracted field are discussed in detail and compared to those of the field diffracted through a small aperture in a flat screen, i. e. the Bethe problem. The model is applied to coated, conically tapered optical fiber tips that are used in Near-Field Scanning Optical Microscopy. It is demonstrated that such tips behave over a large portion of space like a simple combination of two effective dipoles located in the apex plane (an electric dipole and a magnetic dipole parallel to the incident fields at the apex) whose exact expressions are determined. However, the large "backward" emission in the P plane - a salient experimen...

  4. 4STAR Sky-Scanning Retrievals of Aerosol Intensive Optical Properties from Multiple Field Campaigns with Detailed Comparisons of SSA Reported During SEAC4RS

    Science.gov (United States)

    Flynn, Connor; Dahlgren, R. P.; Dunagan, S.; Johnson, R.; Kacenelenbogen, M.; LeBlanc, S.; Livingston, J.; Redemann, J.; Schmid, B.; Segal Rozenhaimer, M.; Shinozuka, Y.; Zhang, Q.; Schmidt, S.; Holben, B.; Sinyuk, A.; Hair, J.; Anderson, B.; Ziemba, L.

    2015-01-01

    The 4STAR (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research) instrument combines airborne sun tracking capabilities of the Ames Airborne Tracking Sun Photometer (AATS-14) with AERONET-like sky-scanning capability and adds state-of-the-art fiber-coupled grating spectrometry to yield hyper spectral measurements of direct solar irradiance and angularly resolved sky radiance. The combination of sun-tracking and sky-scanning capability enables retrievals of wavelength-dependent aerosol optical depth (AOD), mode-resolved aerosol size distribution (SD), asphericity, and complex refractive index, and thus also the scattering phase function, asymmetry parameter, single-scattering albedo (SSA), and absorption aerosol optical thickness (AAOT).From 2012 to 2014 4STAR participated in four major field campaigns: the U.S. Dept. of Energy TCAP I II campaigns, and NASAs SEAC4RS and ARISE campaigns. Establishing a strong performance record, 4STAR operated successfully on all flights conducted during each of these campaigns. Sky radiance spectra from scans in either constant azimuth (principal plane) or constant zenith angle (almucantar) were interspersed with direct beam measurements during level legs. During SEAC4RS and ARISE, 4STAR airborne measurements were augmented with flight-level albedo from the collocated Shortwave Spectral Flux Radiometer (SSFR) providing improved specification of below-aircraft radiative conditions for the retrieval. Calibrated radiances and retrieved products will be presented with particular emphasis on detailed comparisons of ambient SSA retrievals and measurements during SEAC4RS from 4STAR, AERONET, HSRL2, and from in situ measurements.

  5. Highlights from 4STAR Sky-Scanning Retrievals of Aerosol Intensive Optical Properties from Multiple Field Campaigns with Detailed Comparisons of SSA Reported During SEAC4RS

    Science.gov (United States)

    Dunagan, Stephen E.

    2016-01-01

    The 4STAR (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research) instrument combines airborne sun tracking capabilities of the Ames Airborne Tracking Sun Photometer (AATS-14) with AERONET (Aerosol Robotic Network)-like sky-scanning capability and adds state-of-the-art fiber-coupled grating spectrometry to yield hyperspectral measurements of direct solar irradiance and angularly resolved sky radiance. The combination of sun-tracking and sky-scanning capability enables retrievals of wavelength-dependent aerosol optical depth (AOD), mode-resolved aerosol size distribution (SD), asphericity, and complex refractive index, and thus also the scattering phase function, asymmetry parameter, single-scattering albedo (SSA), and absorption aerosol optical thickness (AAOT). From 2012 to 2014 4STAR participated in four major field campaigns: the U.S. Dept. of Energy's TCAP (Two-Column Aerosol Project) I & II campaigns, and NASA's SEAC4RS (Studies of Emissions, Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys) and ARISE (Arctic Radiation - IceBridge Sea & Ice Experiment) campaigns. Establishing a strong performance record, 4STAR operated successfully on all flights conducted during each of these campaigns. Sky radiance spectra from scans in either constant azimuth (principal plane) or constant zenith angle (almucantar) were interspersed with direct beam measurements during level legs. During SEAC4RS and ARISE, 4STAR airborne measurements were augmented with flight-level albedo from the collocated Shortwave Spectral Flux Radiometer (SSFR) providing improved specification of below-aircraft radiative conditions for the retrieval. Calibrated radiances and retrieved products will be presented with particular emphasis on detailed comparisons of ambient SSA retrievals and measurements during SEAC4RS from 4STAR, AERONET, HSRL2 (High Spectral Resolution Lidar), and from in situ measurements.

  6. New Optical Scanning Tomography using a rotating slicing for time-resolved measurements of 3D full field displacements in structures

    Science.gov (United States)

    Morandi, P.; Brémand, F.; Doumalin, P.; Germaneau, A.; Dupré, J. C.

    2014-07-01

    In this paper, a new optical tomography process is presented. It has been developed for time-resolved measurement of kinematic fields in the whole volume of structure. This new process is based on the scan of the specimen by a plane laser beam submitted to a motion of rotation. Calibration and reconstruction steps have been established and are described in this document. Acquisition is achieved by illuminating successive slices in the specimen using a rotating plane laser beam and data are recorded with a single CCD camera. The recorded volumes are analyzed by Digital Volume Correlation to measure the three displacement components in the bulk. This new acquisition process is assessed by performing sub-voxel rigid body translations along the three axes. We discuss the quality of a reconstructed volume and also the measurement accuracy in terms of mean error and standard deviation through rigid body displacement tests. Results are compared with those obtained using classical Optical Scanning Tomography (OST) and using X-ray Tomography.

  7. Second harmonic generation in a KNbO3 nanorod and its detection by using a near-field scanning optical microscope

    Science.gov (United States)

    Park, D. J.; Kang, P. G.; Jung, J. H.; Lee, H. H.; Choi, S. B.

    2016-04-01

    We report on an observation of second harmonic generation in an individual KNbO3 nanorod by using a near-field scanning optical microscope. The second harmonic is successfully generated by irradiating with a femtosecond laser having center wavelengths of 1200, 1100, and 972 nm. Such a second harmonic yield shows a clear dependence on the incident laser polarization, where maximum yield is obtained when the incident laser polarization is parallel to the long axis of an individual nanorod. A spatially-resolved second harmonic image shows a bright spot at the edge of the nanorod, which is attributed to the elaborated intensity of both fundamental laser light and second harmonic light inside the nanowire owing to cavity-mode formation.

  8. Speciation of europium (III) surface species on monocrystalline alumina using time-resolved laser-induced fluorescence-scanning near-field optical microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ghaleb, K.A.; Viala, F.; Miserque, F.; Salmon, L. [CEA Saclay, DEN/DANS/DPC/SCP, Lab Reactivite Surface et Interface, F-91191 Gif Sur Yvette, (France); Reiller, P. [CEA Saclay, DEN/DANS/DPC/SECR, Lab Speciat Radionucleides et Mol, F-91191 Gif Sur Yvette, (France); Moutiers, G. [CEA Saclay, DEN/DANS/DPC, Serv Chim Phys, F-91191 Gif Sur Yvette, (France)

    2008-07-01

    The aim of this work was to perform highly localized spectroscopic surface measurements by combining time-resolved laser spectroscopy and scanning near-field optical microscopy. The final purpose of that was to study surface sorption at the molecular level of trivalent ions in the framework of nuclear waste disposal assessment. Time-resolved laser spectroscopy presents the advantages of being selective, sensitive, and noninvasive and scanning near-field optical microscopy is a promising technique for high resolution surface speciation. Investigation of the interaction between trivalent europium and a monocrystalline alumina (11-bar02) surface was made using different conditions of concentration and pH. We found that the distribution of sorbed europium was always homogeneous with a decay time of europium (III) equal to 350 {mu}s {+-} 15 {mu}s. On the other hand, carbonate species with a decay time of 210 {mu}s {+-} 10 {mu}s or other hydroxide species with a decay time of 180 {mu}s {+-} 10 {mu}s were detected on the surface when a higher concentration or a higher pH solution, respectively, were used. Distribution of these species was heterogeneous and their associated fluorescence signal was relatively high, evoking a precipitated form. X-ray photoelectron spectroscopy (XPS) was also used on the same samples as a complementary technique. A binding energy of 1135.1 eV was obtained for the sorbed europium and another binding energy of 1134.4 eV was obtained for the hydroxide species, thus confirming the presence of two kinds of species on the surface. (authors)

  9. First Overtone Frequency Stimulated Quartz Tuning Fork Used for Shear-Force Scanning Near-Field Optical Microscopy

    Institute of Scientific and Technical Information of China (English)

    刘晟; 孙家林; 孙红三; 谭晓靖; 时硕; 郭继华; 赵钧

    2003-01-01

    The conventional 32.768 kHz tuning fork is stimulated at its first overtone resonant frequency of ~190 kHz for shear-force distance control.The time constant is measured to be 0.54 ms and it decreases about 40 times faster than that of the fundamental frequency(20.76ms).The cross section of a corn root with a height difference of ~ 3μm is imaged at a scan speed of 12μm/s for 256 × 256 pixels.

  10. Optical analysis of scanning microstereolithography systems

    Science.gov (United States)

    Deshmukh, Suhas P.; Dubey, Shashikant; Gandhi, P. S.

    2006-01-01

    Microstereolithography (MSL) is rapidly developing technique for micro-fabrication. Vector-by-vector scanning MSL has a potential to create true 3D micro-devices as compared to mostly planar (2D-2 1/2 D) devices fabricated by conventional MEMS techniques. Previous literature shows two different scanning methods:(1) Galvanomirror scanning, (2) Photoreactor tank scanning. Galvanomirror scanning technique has higher fabrication speed but poor resolution because of defocusing of laser spot on the resin surface. Photo-reactor tank scanning has higher resolution but produces a wavy structures and limited speed of fabrication. This paper proposes and develops an offaxis lens scanning technique for MSL and carries out optical analysis to compare its performance with the existing techniques mentioned above. The comparison clearly demonstrates improved performance with the proposed offaxis lens scanning technique.

  11. Shear Force Detection Using Single-Tine Oscillating Tuning Fork for Scanning Near-Field Optical Microscopy

    Institute of Scientific and Technical Information of China (English)

    谭晓靖; 孙家林; 刘晟; 郭继华; 孙红三

    2003-01-01

    We propose a new method to detect near-field by using a single-tine oscillating tuning fork with mechanically asymmetric excitation that exhibits the sensitivity and stability better than that by using a double-tine oscillating one. Comparison of shear forces for the two methods demonstrate that the single-tine oscillating tuning fork provides a simpler and more sensitive method for near-field measurements. A theoretical analysis is presented for explanation to the greater sensitivity. The method is demonstrated by imaging a sparse-packed layer of micro-spheres in size of 200 nm.

  12. The crocidolite fibres interaction with human mesothelial cells as investigated by combining electron microscopy, atomic force and scanning near-field optical microscopy.

    Science.gov (United States)

    Andolfi, Laura; Trevisan, Elisa; Zweyer, Marina; Prato, Stefano; Troian, Barbara; Vita, Francesca; Borelli, Violetta; Soranzo, Maria Rosa; Melato, Mauro; Zabucchi, Giuliano

    2013-03-01

    In this study, we have performed a morphological analysis of crocidolite fibres interaction with mesothelial cells (MET5A) by combining conventional electron microscopy with atomic force (AFM) and scanning near-field optical microscopy (SNOM). After 6-h exposure at a crocidolite dose of 5 μg cm(-2), 90% of MET5A cells interact with fibres that under these conditions have a low cytotoxic effect. SEM images point out that fibres can be either engulfed by the cells that lose their typical morphology or they can accumulate over or partially inside the cells, which preserve their typical spread morphology. By using AFM we are able to directly visualize the entry-site of nanometric-sized fibres at the plasma membrane of the spread mesothelial cells. More importantly, the crocidolite fibres that are observed to penetrate the plasma membrane in SNOM topography can be simultaneously followed beneath the cell surface in the SNOM optical images. The analysis of SNOM data demonstrates the entrance of crocidolite fibres in proximity of nuclear compartment, as observed also in the TEM images. Our findings indicate that the combination of conventional electron microscopy with novel nanoscopic techniques can be considered a promising approach to achieve a comprehensive morphological description of the interaction between asbestos fibres and mesothelial cells that represents the early event in fibre pathogenesis.

  13. Rotary-scanning optical resolution photoacoustic microscopy

    Science.gov (United States)

    Qi, Weizhi; Xi, Lei

    2016-10-01

    Optical resolution photoacoustic microscopy (ORPAM) is currently one of the fastest evolving photoacoustic imaging modalities. It has a comparable spatial resolution to pure optical microscopic techniques such as epifluorescence microscopy, confocal microscopy, and two-photon microscopy, but also owns a deeper penetration depth. In this paper, we report a rotary-scanning (RS)-ORPAM that utilizes a galvanometer scanner integrated with objective to achieve rotary laser scanning. A 15 MHz cylindrically focused ultrasonic transducer is mounted onto a motorized rotation stage to follow optical scanning traces synchronously. To minimize the loss of signal to noise ratio, the acoustic focus is precisely adjusted to reach confocal with optical focus. Black tapes and carbon fibers are firstly imaged to evaluate the performance of the system, and then in vivo imaging of vasculature networks inside the ears and brains of mice is demonstrated using this system.

  14. Optical scanning holography for stereoscopic display

    Science.gov (United States)

    Liu, Jung-Ping; Wen, Hsuan-Hsuan

    2016-10-01

    Optical Scanning Holography (OSH) is a scanning-type digital holographic recording technique. One of OSH's most important properties is that the OSH can record an incoherent hologram, which is free of speckle and thus is suitable for the applications of holographic display. The recording time of a scanning hologram is proportional to the sampling resolution. Hence the viewing angle as well as the resolution of a scanning hologram is limited for avoid too long recording. As a result, the viewing angle is not large enough for optical display. To solve this problem, we recorded two scanning holograms at different viewing angles. The two holograms are synthesized to a single stereoscopic hologram with two main viewing angles. In displaying, two views at the two main viewing angles are reconstructed. Because both views contain full-depth-resolved 3D scenes, the problem of accommodation conflict in conventional stereogram is avoided.

  15. Magnetic field distributions on Ag-Bi2223 tape by the magnetic optical and scanning hall sensor measurements; Jiki kogakuho oyobi sosagata horu soshiho wo mochiita Ag-Bi2223 tepu hyomen deno jiba bunpu

    Energy Technology Data Exchange (ETDEWEB)

    Otake, A.; Ota, A. [Toyohashi Univ. of Tech., Aichi (Japan); Kawano, K.; Abell, S.

    1999-11-10

    We have measured the magnetic field distribution of silver sheath Bi2223 wire rod in the surface until now using the scanning Hall element method. In magnetic field distribution measuring method, there is magneto-optic method using the Faraday effect of a magnetism network film except for the Hall element method. We measured the magnetic field distribution of silver sheath Bi2223 wire rod using two techniques of the Hall element and magneto-optics method in order to understand magnetic field distribution further, and both results were compared and were examined. (NEDO)

  16. Near field optics and nanoscopy

    CERN Document Server

    Fillard, J P

    1996-01-01

    This book contains the most recent information on optical nanoscopy. Far-Field and Near-Field properties on e.m. waves are presented which illustrate how optical images can be obtained from sub-micron objects. Scanning Probe techniques and computer processing are covered here. An explanation is given on how propagating photons or evanescent waves can behave over distances shorter than the wavelength, taking into account the presence of small objects. Quantum tunneling of photons is explained comparatively with the electron mechanism. Technical details are given on photon tunneling microscopes.

  17. SCANNING TUNNELING MICROSCOPY STUDIES ON OPTICAL DISC

    Institute of Scientific and Technical Information of China (English)

    徐磊; 顾冬红; 等

    1994-01-01

    Scanning tunneling microscope(STM) is used to investigate the optical dise.The areas with and without data stampers are all observedcarefully.Three-dimensional images of the disc surface clearly demonstrate the period.depth of the grooves and the shape of data stampers.Some phenomena of STM imaging are also discussed.

  18. Scanning Techniques For Optical Data Storage

    Science.gov (United States)

    Towner, David K.

    1987-01-01

    It seems almost paradoxical that beams of light can be moved and steered at very high speeds using a variety of scanning methods, yet the optical disk drives now being designed and marketed for data storage applications have comparatively long access times. Knowing that optical data storage has unrealized potential is of interest, but of more immediate concern is the recognition that poor access performance is a serious design issue. Magnetic disk drives offer average seek times in the 15-25ms range, compared to about 80-500ms (or more, for CD ROMS) for current optical drives. This performance disparity exists, in part, because the relatively massive "optical heads" in use today cannot be transported across the radius of a disk as quickly as a stack of much lighter magnetic heads. Any potential distance advantage that the optical drive might have, due to its substantially higher track density, is offset by the magnetic drive's use of a multi-disk stack. As a result, the drive must achieve similar radial accelerations during seeks if it is to have similar average access times. The inability of current optical drives to approach the access speeds of comparable magnetic drives significantly reduces the competitiveness of optical products in major segments of the very large data storage market. This shortcoming is especially disturbing when we know that opto-mechanical scanners typically operate in the 1-10ms range and that non-mechanical scanning techniques can be substantially faster than that.

  19. Optical scanning cryptography for secure wireless transmission

    Science.gov (United States)

    Poon, Ting-Chung; Kim, Taegeun; Doh, Kyu

    2003-11-01

    We propose a method for secure wireless transmission of encrypted information. By use of an encryption key, an image or document is optically encrypted by optical heterodyne scanning and hence encryption is performed on the fly. We call this technique optical scanning cryptography. The output of the heterodyne encrypted signal is at radio frequency and can be directly sent through an antenna to a secure site for digital storage to be prepared for decryption. In the secure site, an identical optical scanning system to that used for encryption is used, together with a decryption key, to generate an electrical signal. The electrical signal is then processed and sent to a computer to be used for decryption. Utilizing the stored information received from the encryption stage and the electrical information from the secure site, a digital decryption unit performs a decryption algorithm. If the encryption key and the decryption key are matched, the decryption unit will decrypt the image or document faithfully. The overall cryptosystem can perform the incoherent optical processing counterpart of the well-known coherent double-random phase-encoding technique. We present computer simulations of the idea.

  20. Optical scanning cryptography for secure wireless transmission.

    Science.gov (United States)

    Poon, Ting-Chung; Kim, Taegeun; Doh, Kyu

    2003-11-10

    We propose a method for secure wireless transmission of encrypted information. By use of an encryption key, an image or document is optically encrypted by optical heterodyne scanning and hence encryption is performed on the fly. We call this technique optical scanning cryptography. The output of the heterodyne encrypted signal is at radio frequency and can be directly sent through an antenna to a secure site for digital storage to be prepared for decryption. In the secure site, an identical optical scanning system to that used for encryption is used, together with a decryption key, to generate an electrical signal. The electrical signal is then processed and sent to a computer to be used for decryption. Utilizing the stored information received from the encryption stage and the electrical information from the secure site, a digital decryption unit performs a decryption algorithm. If the encryption key and the decryption key are matched, the decryption unit will decrypt the image or document faithfully. The overall cryptosystem can perform the incoherent optical processing counterpart of the well-known coherent double-random phase-encoding technique. We present computer simulations of the idea.

  1. Reflective afocal broadband adaptive optics scanning ophthalmoscope

    Science.gov (United States)

    Dubra, Alfredo; Sulai, Yusufu

    2011-01-01

    A broadband adaptive optics scanning ophthalmoscope (BAOSO) consisting of four afocal telescopes, formed by pairs of off-axis spherical mirrors in a non-planar arrangement, is presented. The non-planar folding of the telescopes is used to simultaneously reduce pupil and image plane astigmatism. The former improves the adaptive optics performance by reducing the root-mean-square (RMS) of the wavefront and the beam wandering due to optical scanning. The latter provides diffraction limited performance over a 3 diopter (D) vergence range. This vergence range allows for the use of any broadband light source(s) in the 450-850 nm wavelength range to simultaneously image any combination of retinal layers. Imaging modalities that could benefit from such a large vergence range are optical coherence tomography (OCT), multi- and hyper-spectral imaging, single- and multi-photon fluorescence. The benefits of the non-planar telescopes in the BAOSO are illustrated by resolving the human foveal photoreceptor mosaic in reflectance using two different superluminescent diodes with 680 and 796 nm peak wavelengths, reaching the eye with a vergence of 0.76 D relative to each other. PMID:21698035

  2. Variable - temperature scanning optical and force microscope

    OpenAIRE

    2004-01-01

    The implementation of a scanning microscope capable of working in confocal, atomic force and apertureless near field configurations is presented. The microscope is designed to operate in the temperature range 4 - 300 K, using conventional helium flow cryostats. In AFM mode, the distance between the sample and an etched tungsten tip is controlled by a self - sensing piezoelectric tuning fork. The vertical position of both the AFM head and microscope objective can be accurately controlled using...

  3. Handheld probes and galvanometer scanning for optical coherence tomography

    Science.gov (United States)

    Duma, V.-F.; Dobre, G.; Demian, D.; Cernat, R.; Sinescu, C.; Topala, F. I.; Negrutiu, M. L.; Hutiu, Gh.; Bradu, A.; Rolland, J. P.; Podoleanu, A. G.

    2015-09-01

    As part of the ongoing effort of the biomedical imaging community to move Optical Coherence Tomography (OCT) systems from the lab to the clinical environment and produce OCT systems appropriate for multiple types of investigations in a medical department, handheld probes equipped with different types of scanners need to be developed. These allow different areas of a patient's body to be investigated using OCT with the same system and even without changing the patient's position. This paper reviews first the state of the art regarding OCT handheld probes. Novel probes with a uni-dimensional (1D) galvanometer-based scanner (GS) developed in our groups are presented. Their advantages and limitations are discussed. Aspects regarding the use of galvoscanners with regard to Micro-Electro- Mechanical Systems (MEMS) are pointed out, in relationship with our studies on optimal scanning functions of galvanometer devices in OCT. These scanning functions are briefly discussed with regard to their main parameters: profile, theoretical duty cycle, scan frequency, and scan amplitude. The optical design of the galvoscanner and refractive optics combination in the probe head, optimized for various applications, is considered. Perspectives of the field are pointed out in the final part of the paper.

  4. The near-field scanning thermal microscope

    Science.gov (United States)

    Wischnath, Uli F.; Welker, Joachim; Munzel, Marco; Kittel, Achim

    2008-07-01

    We report on the design, characterization, and performance of a near-field scanning thermal microscope capable to detect thermal heat currents mediated by evanescent thermal electromagnetic fields close to the surface of a sample. The instrument operates in ultrahigh vacuum and retains its scanning tunneling microscope functionality, so that its miniature, micropipette-based thermocouple sensor can be positioned with high accuracy. Heat currents on the order of 10-7W are registered in z spectroscopy at distances from the sample ranging from 1 to about 30nm. In addition, the device provides detailed thermographic images of a sample's surface.

  5. Adaptive optics scanning ophthalmoscopy with annular pupils.

    Science.gov (United States)

    Sulai, Yusufu N; Dubra, Alfredo

    2012-07-01

    Annular apodization of the illumination and/or imaging pupils of an adaptive optics scanning light ophthalmoscope (AOSLO) for improving transverse resolution was evaluated using three different normalized inner radii (0.26, 0.39 and 0.52). In vivo imaging of the human photoreceptor mosaic at 0.5 and 10° from fixation indicates that the use of an annular illumination pupil and a circular imaging pupil provides the most benefit of all configurations when using a one Airy disk diameter pinhole, in agreement with the paraxial confocal microscopy theory. Annular illumination pupils with 0.26 and 0.39 normalized inner radii performed best in terms of the narrowing of the autocorrelation central lobe (between 7 and 12%), and the increase in manual and automated photoreceptor counts (8 to 20% more cones and 11 to 29% more rods). It was observed that the use of annular pupils with large inner radii can result in multi-modal cone photoreceptor intensity profiles. The effect of the annular masks on the average photoreceptor intensity is consistent with the Stiles-Crawford effect (SCE). This indicates that combinations of images of the same photoreceptors with different apodization configurations and/or annular masks can be used to distinguish cones from rods, even when the former have complex multi-modal intensity profiles. In addition to narrowing the point spread function transversally, the use of annular apodizing masks also elongates it axially, a fact that can be used for extending the depth of focus of techniques such as adaptive optics optical coherence tomography (AOOCT). Finally, the positive results from this work suggest that annular pupil apodization could be used in refractive or catadioptric adaptive optics ophthalmoscopes to mitigate undesired back-reflections.

  6. On cylindrical near-field scanning techniques

    DEFF Research Database (Denmark)

    Appel-Hansen, Jørgen

    1980-01-01

    The agreement between the coupling equations obtained in the literature by using the reciprocity theorem and the scattering matrix formulation is demonstrated. The field is expanded in cylindrical vector wave functions and the addition theorem for these functions is used. The communication may se...... serve as a tutorial introduction to the cylindrical scanning techniques....

  7. 3D mechanical analysis of aeronautical plain bearings: Validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography

    Science.gov (United States)

    Germaneau, A.; Peyruseigt, F.; Mistou, S.; Doumalin, P.; Dupré, J.-C.

    2010-06-01

    On Airbus aircraft, spherical plain bearings are used on many components; in particular to link engine to pylon or pylon to wing. Design of bearings is based on contact pressure distribution on spherical surfaces. To determine this distribution, a 3D analysis of the mechanical behaviour of aeronautical plain bearing is presented in this paper. A numerical model has been built and validated from a comparison with 3D experimental measurements of kinematic components. For that, digital volume correlation (DVC) coupled with optical scanning tomography (OST) is employed to study the mechanical response of a plain bearing model made in epoxy resin. Experimental results have been compared with the ones obtained from the simulated model. This comparison enables us to study the influence of various boundary conditions to build the FE model. Some factors have been highlighted like the fitting behaviour which can radically change contact pressure distribution. This work shows the contribution of a representative mechanical environment to study precisely mechanical response of aeronautical plain bearings.

  8. Magnetic-field-compensation optical vector magnetometer.

    Science.gov (United States)

    Papoyan, Aram; Shmavonyan, Svetlana; Khanbekyan, Alen; Khanbekyan, Karen; Marinelli, Carmela; Mariotti, Emilio

    2016-02-01

    A concept for an optical magnetometer used for the measurement of magnitude and direction of a magnetic field (B-field) in two orthogonal directions is developed based on double scanning of a B-field to compensate the measured field to zero value, which is monitored by a resonant magneto-optical process in an unshielded atomic vapor cell. Implementation of the technique using the nonlinear Hanle effect on the D2 line of rubidium demonstrates viability and efficiency of the proposed concept. The ways to enhance characteristics of the suggested technique and optimize its performance, as well as the possible extension to three-axis magnetometry, are discussed.

  9. Three-dimensional edge extraction in optical scanning holography

    Science.gov (United States)

    Zong, Yonghong; Zhou, Changhe; Ma, Jianyong; Jia, Wei; Wang, Jin

    2016-10-01

    Edge extraction has found applications in various image processing fields, such as in pattern recognition. In this paper, a new method is proposed for edge extraction of three-dimensional objects in optical scanning holography (OSH). Isotropic and anisotropic edge extraction of 3D objects is simulated using spiral phase plates in OSH operating in an incoherent mode. We propose to use a delta function and a spiral phase plate as the pupil functions to realize isotropic and anisotropic edge extraction. Our computer simulations show the capability of extracting the edges of a given 3D object by spiral phase filtering in OSH.

  10. High-Resolution, Wide-Field-of-View Scanning Telescope

    Science.gov (United States)

    Sepulveda, Cesar; Wilson, Robert; Seshadri, Suresh

    2007-01-01

    A proposed telescope would afford high resolution over a narrow field of view (<0.10 ) while scanning over a total field of view nominally 16 wide without need to slew the entire massive telescope structure. The telescope design enables resolution of a 1-m-wide object in a 50- km-wide area of the surface of the Earth as part of a 200-km-wide area field of view monitored from an orbit at an altitude of 700 km. The conceptual design of this telescope could also be adapted to other applications both terrestrial and extraterrestrial in which there are requirements for telescopes that afford both wide- and narrow-field capabilities. In the proposed telescope, the scanning would be effected according to a principle similar to that of the Arecibo radio telescope, in which the primary mirror is stationary with respect to the ground and a receiver is moved across the focal surface of the primary mirror. The proposed telescope would comprise (1) a large spherical primary mirror that would afford high resolution over a narrow field of view and (2) a small displaceable optical relay segment that would be pivoted about the center of an aperture stop to effect the required scanning (see figure). Taken together, both comprise a scanning narrow-angle telescope that does not require slewing the telescope structure. In normal operation, the massive telescope structure would stare at a fixed location on the ground. The inner moveable relay optic would be pivoted to scan the narrower field of view over the wider one, making it possible to retain a fixed telescope orientation, while obtaining high-resolution images over multiple target areas during an interval of 3 to 4 minutes in the intended orbit. The pivoting relay segment of the narrow-angle telescope would include refractive and reflective optical elements, including two aspherical mirrors, to counteract the spherical aberration of the primary mirror. Overall, the combination of the primary mirror and the smaller relay optic

  11. Differential geometry of the ruled surfaces optically generated by mirror scanning devices: II. Generation of helicoids and hyperbolic paraboloids.

    Science.gov (United States)

    Li, Yajun

    2011-06-01

    The theory developed in Part I of this study [Y. Li, "Differential geometry of the ruled surfaces optically generated by mirror-scanning devices. I. Intrinsic and extrinsic properties of the scan field," J. Opt. Soc. Am. A28, 667 (2011)] for the ruled surfaces optically generated by single-mirror scanning devices is extended to multimirror scanning systems for an investigation of optical generation of the well-known ruled surfaces, such as helicoid, Plücker's conoid, and hyperbolic paraboloid.

  12. Field guide to nonlinear optics

    CERN Document Server

    Powers, Peter E

    2013-01-01

    Optomechanics is a field of mechanics that addresses the specific design challenges associated with optical systems. This [i]Field Guide [/i]describes how to mount optical components, as well as how to analyze a given design. It is intended for practicing optical and mechanical engineers whose work requires knowledge in both optics and mechanics. This Field Guide is designed for those looking for a condensed and concise source of key concepts, equations, and techniques for nonlinear optics. Topics covered include technologically important effects, recent developments in nonlinear optics

  13. Novel optical scanning cryptography using Fresnel telescope imaging.

    Science.gov (United States)

    Yan, Aimin; Sun, Jianfeng; Hu, Zhijuan; Zhang, Jingtao; Liu, Liren

    2015-07-13

    We propose a new method called modified optical scanning cryptography using Fresnel telescope imaging technique for encryption and decryption of remote objects. An image or object can be optically encrypted on the fly by Fresnel telescope scanning system together with an encryption key. For image decryption, the encrypted signals are received and processed with an optical coherent heterodyne detection system. The proposed method has strong performance through use of secure Fresnel telescope scanning with orthogonal polarized beams and efficient all-optical information processing. The validity of the proposed method is demonstrated by numerical simulations and experimental results.

  14. Adaptive optics scanning laser ophthalmoscope imaging: technology update.

    Science.gov (United States)

    Merino, David; Loza-Alvarez, Pablo

    2016-01-01

    Adaptive optics (AO) retinal imaging has become very popular in the past few years, especially within the ophthalmic research community. Several different retinal techniques, such as fundus imaging cameras or optical coherence tomography systems, have been coupled with AO in order to produce impressive images showing individual cell mosaics over different layers of the in vivo human retina. The combination of AO with scanning laser ophthalmoscopy has been extensively used to generate impressive images of the human retina with unprecedented resolution, showing individual photoreceptor cells, retinal pigment epithelium cells, as well as microscopic capillary vessels, or the nerve fiber layer. Over the past few years, the technique has evolved to develop several different applications not only in the clinic but also in different animal models, thanks to technological developments in the field. These developments have specific applications to different fields of investigation, which are not limited to the study of retinal diseases but also to the understanding of the retinal function and vision science. This review is an attempt to summarize these developments in an understandable and brief manner in order to guide the reader into the possibilities that AO scanning laser ophthalmoscopy offers, as well as its limitations, which should be taken into account when planning on using it.

  15. Adaptive optics scanning laser ophthalmoscope imaging: technology update

    Directory of Open Access Journals (Sweden)

    Merino D

    2016-04-01

    Full Text Available David Merino, Pablo Loza-Alvarez The Institute of Photonic Sciences (ICFO, The Barcelona Institute of Science and Technology, Castelldefels, Barcelona, Spain Abstract: Adaptive optics (AO retinal imaging has become very popular in the past few years, especially within the ophthalmic research community. Several different retinal techniques, such as fundus imaging cameras or optical coherence tomography systems, have been coupled with AO in order to produce impressive images showing individual cell mosaics over different layers of the in vivo human retina. The combination of AO with scanning laser ophthalmoscopy has been extensively used to generate impressive images of the human retina with unprecedented resolution, showing individual photoreceptor cells, retinal pigment epithelium cells, as well as microscopic capillary vessels, or the nerve fiber layer. Over the past few years, the technique has evolved to develop several different applications not only in the clinic but also in different animal models, thanks to technological developments in the field. These developments have specific applications to different fields of investigation, which are not limited to the study of retinal diseases but also to the understanding of the retinal function and vision science. This review is an attempt to summarize these developments in an understandable and brief manner in order to guide the reader into the possibilities that AO scanning laser ophthalmoscopy offers, as well as its limitations, which should be taken into account when planning on using it. Keywords: high-resolution, in vivo retinal imaging, AOSLO

  16. Scanning Michelson interferometer for imaging surface acoustic wave fields.

    Science.gov (United States)

    Knuuttila, J V; Tikka, P T; Salomaa, M M

    2000-05-01

    A scanning homodyne Michelson interferometer is constructed for two-dimensional imaging of high-frequency surface acoustic wave (SAW) fields in SAW devices. The interferometer possesses a sensitivity of ~10(-5)nm/ radicalHz , and it is capable of directly measuring SAW's with frequencies ranging from 0.5 MHz up to 1 GHz. The fast scheme used for locating the optimum operation point of the interferometer facilitates high measuring speeds, up to 50,000 points/h. The measured field image has a lateral resolution of better than 1 mu;m . The fully optical noninvasive scanning system can be applied to SAW device development and research, providing information on acoustic wave distribution that cannot be obtained by merely electrical measurements.

  17. Scanning optical microscope with long working distance objective

    Science.gov (United States)

    Cloutier, Sylvain G.

    2010-10-19

    A scanning optical microscope, including: a light source to generate a beam of probe light; collimation optics to substantially collimate the probe beam; a probe-result beamsplitter; a long working-distance, infinity-corrected objective; scanning means to scan a beam spot of the focused probe beam on or within a sample; relay optics; and a detector. The collimation optics are disposed in the probe beam. The probe-result beamsplitter is arranged in the optical paths of the probe beam and the resultant light from the sample. The beamsplitter reflects the probe beam into the objective and transmits resultant light. The long working-distance, infinity-corrected objective is also arranged in the optical paths of the probe beam and the resultant light. It focuses the reflected probe beam onto the sample, and collects and substantially collimates the resultant light. The relay optics are arranged to relay the transmitted resultant light from the beamsplitter to the detector.

  18. Error correction based on micro-scanning preprocessing for an optical micro-scanning thermal microscope imaging system

    Science.gov (United States)

    Gao, Meijing; Xu, Jie; Tan, Ailing; Zu, Zhenlong; Yang, Ming; Wang, Jingyuan

    2017-06-01

    In recent years, various thermal microscope imaging systems have been developed to meet the demands of micro-thermal analysis for large-scale integrated circuits, biomedical, science, and research fields. However, conventional thermal microscope imaging systems, which use cooled infrared detectors are heavy and expensive. In order to solve this problem, we developed a thermal microscope imaging system based on an uncooled infrared detector. However, the spatial resolution of the thermal microscope imaging system based on an uncooled infrared detector is low. With optical micro-scanning technology, the spatial resolution of the thermal microscope imaging system can be increased without increasing the detector dimension or reducing the detector unit size. In order to improve its spatial resolution, a micro-scanning system based on optical plate rotation was developed, and an optical microscanning thermal microscope imaging system was obtained after the integrated design. Due to environmental factors, mechanical vibration, alignment error and other factors, there is micro-scanning error in the designed micro-scanning thermal microscope imaging system. The four low-resolution images collected by micro-scanning thermal microscope imaging system are not standard down-sampled images. The quality of the image interpolated directly by four collected images is reduced and the performance of the micro-scanning system isn't fully exploited. Therefore, based on the proposed second-order oversampling reconstruction micro-scanning error correction algorithm and the new edge directed interpolation algorithm, a new micro-scanning error correction technique is proposed. Simulations and experiments show that the proposed technique can effectively reduce optical micro-scanning error, improve the systems spatial resolution and optimize the effect of the imaging system. It can be applied to other electro-optical imaging systems to improve their spatial resolution.

  19. Selection of Acquisition Scan Methods in Intersatellite Optical Communications

    Institute of Scientific and Technical Information of China (English)

    于思源; 高惠德; 马晶; 董蕴华; 马祖光

    2002-01-01

    In this paper, a theoretical model of the acquisition in intersatellite optical communications (IOC) is founded with the assumption that beacon pointing errors could be modeled as Gaussian random variables. An optimal scan method should be chosen according to the average acquisition time under a certain acquisition probability. With analysis of the most common scan methods during the establishment of IOC, the raster-spiral scanning can substitute the spiral scanning is found. The raster scanning and raster-spiral scanning are simulated using Monte Carlo method and the result shows the first one is optimal for acquisition in IOC.

  20. A combined near field optical and force microscope

    NARCIS (Netherlands)

    Moers, M.H.P.; Tack, R.G.; Hulst, van N.F.; Bölger, B.

    1993-01-01

    Scanning near field optical microscopy (SNOM) is the optical alternative of the scanning probe microscopical techniques which enables a lateral resolution down to about 10 nm, unlimited by diffraction. Moreover, the potential of non- destructive imaging of chemical and biological samples with nanome

  1. Review of near-field optical microscopy

    Institute of Scientific and Technical Information of China (English)

    WU Shi-fa

    2006-01-01

    This review has introduced a new near-field optical microscope (NOM)-atomic force microscope combined with photon scanning tunneling microscope (AF/PSTM).During scanning,AF/PSTM could get two optical images of refractive index image and transmissivity image,and two AFM images of topography image and phase image.A reflected near-field optical microscope (AF/RSNOM) has also been developed on AF/PSTM platform.The NOM has been reviewed in this paper and the comparison between AF/PSTM & RSNOM and the commercial A-SNOM & RNOM has also been discussed.The functions of AF/PSTM & RSNOM are much better than A-SNOM & RNOM.

  2. Precision targeting with a tracking adaptive optics scanning laser ophthalmoscope

    Science.gov (United States)

    Hammer, Daniel X.; Ferguson, R. Daniel; Bigelow, Chad E.; Iftimia, Nicusor V.; Ustun, Teoman E.; Noojin, Gary D.; Stolarski, David J.; Hodnett, Harvey M.; Imholte, Michelle L.; Kumru, Semih S.; McCall, Michelle N.; Toth, Cynthia A.; Rockwell, Benjamin A.

    2006-02-01

    Precise targeting of retinal structures including retinal pigment epithelial cells, feeder vessels, ganglion cells, photoreceptors, and other cells important for light transduction may enable earlier disease intervention with laser therapies and advanced methods for vision studies. A novel imaging system based upon scanning laser ophthalmoscopy (SLO) with adaptive optics (AO) and active image stabilization was designed, developed, and tested in humans and animals. An additional port allows delivery of aberration-corrected therapeutic/stimulus laser sources. The system design includes simultaneous presentation of non-AO, wide-field (~40 deg) and AO, high-magnification (1-2 deg) retinal scans easily positioned anywhere on the retina in a drag-and-drop manner. The AO optical design achieves an error of third generation retinal tracking system achieves a bandwidth of greater than 1 kHz allowing acquisition of stabilized AO images with an accuracy of ~10 μm. Normal adult human volunteers and animals with previously-placed lesions (cynomolgus monkeys) were tested to optimize the tracking instrumentation and to characterize AO imaging performance. Ultrafast laser pulses were delivered to monkeys to characterize the ability to precisely place lesions and stimulus beams. Other advanced features such as real-time image averaging, automatic highresolution mosaic generation, and automatic blink detection and tracking re-lock were also tested. The system has the potential to become an important tool to clinicians and researchers for early detection and treatment of retinal diseases.

  3. Large Aperture Scanning Lidar Based on Holographic Optical Elements

    Science.gov (United States)

    Schwemmer, Geary K.; Miller, David O.; Wilkerson, Thomas D.; Andrus, Ionio; Guerra, David V.; Einaudi, Franco (Technical Monitor)

    2001-01-01

    Rotating Lidar Instrument Experiment (HARLIE). The HOE spins like a compact disk in a large ring ball bearing. In an aircraft the HOE faces down, looking out through a window at an angle of 45 degrees off-nadir. The HOE diffracts 85% of the incident 532 nm light into a 160 micron spot at a focal length of 1 meter. HARLIE is a field deployable lidar measuring aerosol, cloud, and boundary layer backscatter for atmospheric research. It has flown several times and is also used from a ground-based trailer in an upward-looking mode. The HOE generates a 45 degree conical scan pattern by rotating at speeds up to 30 rpm. Like PHASERS, the HOE in HARLIE serves both as the laser collimating lens as well as the receiver telescope primary optic. The telescope is coupled to the receiver package via fiber optic. The transmitter is a diode pumped Nd:YAG laser operating at 1064 nm, delivering 1 mJ pulses at a 5 KHz rep-rate. The receiver has a 200 microradian field-of-view and a 0.5 nm optical bandpass. The photon counting data system utilizes a single Geiger-mode silicon avalanche photodiode detector, This new technology has also presented us with new data visualization challenges as well as new measurement techniques. The backscatter data obtained from a stationary (i.e. ground-based) scanning HOE lidar is on the surface of a cone, which when viewed over many consecutive scans can reveal atmospheric motions on this surface over time as the atmosphere advects over the site. In a moving platform such as an airplane or satellite, the data from consecutive scans cover different areas under the flight path, revealing atmospheric structure in 3-dimensions. An example of a visualization of HARLIE ground-based data is presented, showing aerosol backscatter on a 90 degree conical surface generated from one 360 degree scan of the lidar during the HOLO-1 field campaign on the afternoon of 10 March 1999. Higher backscatter levels are rendered as lighter signal against a dark background. Breaking

  4. Field Guide to Diffractive Optics

    CERN Document Server

    Soskind, Yakov

    2011-01-01

    This SPIE Field Guide provides the operational principles and established terminology of diffractive optics as well as a comprehensive overview of the main types of diffractive optics components. An emphasis is placed on the qualitative explanation of the diffraction phenomenon by the use of field distributions and graphs, providing the basis for understanding the fundamental relations and important trends.

  5. Scanning near-field infrared microscopy on semiconductor structures

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Rainer

    2011-01-15

    Near-field optical microscopy has attracted remarkable attention, as it is the only technique that allows the investigation of local optical properties with a resolution far below the diffraction limit. Especially, the scattering-type near-field optical microscopy allows the nondestructive examination of surfaces without restrictions to the applicable wavelengths. However, its usability is limited by the availability of appropriate light sources. In the context of this work, this limit was overcome by the development of a scattering-type near-field microscope that uses a widely tunable free-electron laser as primary light source. In the theoretical part, it is shown that an optical near-field contrast can be expected when materials with different dielectric functions are combined. It is derived that these differences yield different scattering cross-sections for the coupled system of the probe and the sample. Those cross-sections define the strength of the near-field signal that can be measured for different materials. Hence, an optical contrast can be expected, when different scattering cross-sections are probed. This principle also applies to vertically stacked or even buried materials, as shown in this thesis experimentally for two sample systems. In the first example, the different dielectric functions were obtained by locally changing the carrier concentration in silicon by the implantation of boron. It is shown that the concentration of free charge-carriers can be deduced from the near-field contrast between implanted and pure silicon. For this purpose, two different experimental approaches were used, a non-interferometric one by using variable wavelengths and an interferometric one with a fixed wavelength. As those techniques yield complementary information, they can be used to quantitatively determine the effective carrier concentration. Both approaches yield consistent results for the carrier concentration, which excellently agrees with predictions from

  6. Field-based transformation optics

    DEFF Research Database (Denmark)

    Novitsky, Andrey

    2011-01-01

    Instead of common definition of the transformation-optics devices via the coordinate transformation we offer the approach founded on boundary conditions for the fields. We demonstrate the effectiveness of the approach by two examples: two-shell cloak and concentrator of electric field. We believe...... that the field-based approach is quite important for effective field control....

  7. Adaptive optics parallel near-confocal scanning ophthalmoscopy.

    Science.gov (United States)

    Lu, Jing; Gu, Boyu; Wang, Xiaolin; Zhang, Yuhua

    2016-08-15

    We present an adaptive optics parallel near-confocal scanning ophthalmoscope (AOPCSO) using a digital micromirror device (DMD). The imaging light is modulated to be a line of point sources by the DMD, illuminating the retina simultaneously. By using a high-speed line camera to acquire the image and using adaptive optics to compensate the ocular wave aberration, the AOPCSO can image the living human eye with cellular level resolution at the frame rate of 100 Hz. AOPCSO has been demonstrated with improved spatial resolution in imaging of the living human retina compared with adaptive optics line scan ophthalmoscopy.

  8. Near-Field Optical Microscopy of Fractal Structures

    DEFF Research Database (Denmark)

    Coello, Victor; Bozhevolnyi, Sergey I.

    1999-01-01

    Using a photon scanning tunnelling microscope combined with a shear-force feedback system, we image both topographical and near-field optical images (at the wavelengths of 633 and 594 nm) of silver colloid fractals. Near-field optical imaging is calibrated with a standing evanescent wave pattern...

  9. Scanning Anode Field Emission Characterisation of Carbon Nanotube emitter arrays

    NARCIS (Netherlands)

    Berhanu, S.; Gröning, O.; Chen, Z.; Merikhi, J.; Bachmann, P.K.

    2011-01-01

    Scanning anode field emission microscopy (SAFEM) was used to characterise carbon nanotube (CNT) emitter arrays produced within Philips CediX-Technotubes' activities. Four different samples were investigated and compared. The field enhancement distributions were determined and the local field

  10. In vivowide-field multispectral scanning laser ophthalmoscopy-optical coherence tomography mouse retinal imager: longitudinal imaging of ganglion cells, microglia, and Müller glia, and mapping of the mouse retinal and choroidal vasculature

    Science.gov (United States)

    Zhang, Pengfei; Zam, Azhar; Jian, Yifan; Wang, Xinlei; Li, Yuanpei; Lam, Kit S.; Burns, Marie E.; Sarunic, Marinko V.; Pugh, Edward N., Jr.; Zawadzki, Robert J.

    2015-12-01

    Scanning laser ophthalmoscopy (SLO) and optical coherence tomography (OCT) provide complementary views of the retina, with the former collecting fluorescence data with good lateral but relatively low-axial resolution, and the latter collecting label-free backscattering data with comparable lateral but much higher axial resolution. To take maximal advantage of the information of both modalities in mouse retinal imaging, we have constructed a compact, four-channel, wide-field (˜50 deg) system that simultaneously acquires and automatically coregisters three channels of confocal SLO and Fourier domain OCT data. The scanner control system allows "zoomed" imaging of a region of interest identified in a wide-field image, providing efficient digital sampling and localization of cellular resolution features in longitudinal imaging of individual mice. The SLO is equipped with a "flip-in" spectrometer that enables spectral "fingerprinting" of fluorochromes. Segmentation of retina layers and en face display facilitate spatial comparison of OCT data with SLO fluorescence patterns. We demonstrate that the system can be used to image an individual retinal ganglion cell over many months, to simultaneously image microglia and Müller glia expressing different fluorochromes, to characterize the distinctive spatial distributions and clearance times of circulating fluorochromes with different molecular sizes, and to produce unequivocal images of the heretofore uncharacterized mouse choroidal vasculature.

  11. Non-scanning, non-interferometric, three-dimensional optical profilometer with nanometer resolution

    Institute of Scientific and Technical Information of China (English)

    Chen-Tai Tan; Yuan-Sheng Chan; Jhao-An Chen; Teh-Chao Liao; Ming-Hung Chiu

    2011-01-01

    A non-scanning, non-interferometric, three-dimensional (3D) optical profilometer based on geometric optics, critical angle principle, and the use of a charge-coupled device (CCD) camera is presented. The surface profile of the test specimen can be transferred into the reflectance profile. The reflectance profile, obtained from a CCD, is the ratio of the intensity at the critical angle to the intensity obtained at the total internal reflection angle. The optical profilometer provides a sub-micron measuring range with nanometer resolution and can be used to measure roughness or surface defects in real time.%A non-scanning,non-interferometric,three-dimensional (3D) optical profilometer based on geometric optics,critical angle principle,and the use of a charge-coupled device (CCD) camera is presented.The surface profile of the test specimen can be transferred into the reflectance profile.The reflectance profile,obtained from a CCD,is the ratio of the intensity at the critical angle to the intensity obtained at the total internal reflection angle.The optical profilometer provides a sub-micron measuring range with nanometer resolution and can be used to measure roughness or surface defects in real time.Optical profilometers may be distinguished into two types:scanning and non-scanning types.Scanning profilometers have better axial resolution but spend much time in measuring.For three-dimensional (3D) surface profile measurement,scanning approaches such as confocal microscopy[1- 3],or near-field microscopy[4],which have high axial and lateral resolutions for measuring a snall scanned area,arc usually not used to measure a large surface profile.Non-scanning approaches such as the noninterferometric method[5,6],interference microscopy[7-10],and second-harmonic generation[11],can measure a large surface field,but the surface height calculation based on the fringe analysis is more complex.

  12. Field guide to adaptive optics

    CERN Document Server

    Tyson, Robert

    2012-01-01

    This SPIE Field Guide provides a summary of the methods for determining the requirements of an adaptive optics system, the performance of the system, and the requirements for the components of the system. This second edition has a greatly expanded presentation of adaptive optics control system design and operation. Discussions of control models are accompanied by various recommendations for implementing the algorithms in hardware.

  13. High-sensitive scanning laser magneto-optical imaging system.

    Science.gov (United States)

    Murakami, Hironaru; Tonouchi, Masayoshi

    2010-01-01

    A high-sensitive scanning laser magneto-optical (MO) imaging system has been developed. The system is mainly composed of a laser source, galvano meters, and a high-sensitive differential optical-detector. Preliminary evaluation of system performance by using a Faraday indicator with a Faraday rotation coefficient of 3.47 x 10(-5) rad/microm Oe shows a magnetic sensitivity of about 5 microT, without any need for accumulation or averaging processing. Using the developed MO system we have succeeded in the fast and quantitative imaging of a rotationally symmetric magnetic field distribution around an YBa(2)Cu(3)O(7-delta) (YBCO) strip line applied with dc-biased current, and also succeeded in the detection of quantized fine signals corresponding to magnetic flux quantum generation in a superconducting loop of an YBCO Josephson vortex flow transistor. Thus, the developed system enables us not only to do fast imaging and local signal detection but also to directly evaluate both the strength and direction of a magnetic signal.

  14. Elemental mapping in a contemporary miniature by full-field X-ray fluorescence imaging with gaseous detector vs. scanning X-ray fluorescence imaging with polycapillary optics

    Science.gov (United States)

    Silva, A. L. M.; Cirino, S.; Carvalho, M. L.; Manso, M.; Pessanha, S.; Azevedo, C. D. R.; Carramate, L. F. N. D.; Santos, J. P.; Guerra, M.; Veloso, J. F. C. A.

    2017-03-01

    Energy dispersive X-ray imaging can be used in several research fields and industrial applications. Elemental mapping through energy dispersive X-ray imaging technique has become a promising method to obtain positional distribution of specific elements in a non-destructive way. To obtain the elemental distribution of a sample it is necessary to use instruments capable of providing a precise positioning together with a good energy resolution. Polycapillary beams together with silicon drift chamber detectors are used in several commercial systems and are considered state-of-the-art spectrometers, however they are usually very costly. A new concept of large energy dispersive X-ray imaging systems based on gaseous radiation detectors emerged in the last years enabling a promising 2D elemental detection at a very reduced price. The main goal of this work is to analyze a contemporary Indian miniature with both X-ray fluorescence imaging systems, the one based on a gaseous detector 2D-THCOBRA and the state-of-the-art spectrometer M4 Tornado, from Bruker. The performance of both systems is compared and evaluated in the context of the sample's analysis.

  15. Field guide to geometrical optics

    CERN Document Server

    Greivenkamp, John E

    2004-01-01

    This Field Guide derives from the treatment of geometrical optics that has evolved from both the undergraduate and graduate programs at the Optical Sciences Center at the University of Arizona. The development is both rigorous and complete, and it features a consistent notation and sign convention. This volume covers Gaussian imagery, paraxial optics, first-order optical system design, system examples, illumination, chromatic effects, and an introduction to aberrations. The appendices provide supplemental material on radiometry and photometry, the human eye, and several other topics.

  16. A near-field optical microscopy nanoarray

    Energy Technology Data Exchange (ETDEWEB)

    Semin, D.J.; Ambrose, W.P.; Goodwin, P.M.; Kwller, A. [Los Alamos National Lab., NM (United States); Wendt, J.R. [Sandia National Labs., Albuquerque, NM (United States)

    1996-12-31

    Multiplexing near-field scanning optical microscopy (NSOM) by the use of a nanoarray with parallel imaging is studied. The fabrication, characterization, and utilization of nanoarrays with {approximately} 100 nm diameter apertures spaced 500 nm center-to- center is presented. Extremely uniform nanoarrays with {approximately} 10{sup 8} apertures were fabricated by electron beam lithography and reactive ion etching. The nanoarrays were characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM). In this paper we utilize these nanoarrays in a laser-illuminated microscope with parallel detection on a charge- coupled device (CCD). Detection of B-phycoerythrin (B-PE) molecules using near-field illumination is presented. In principle, our system can be used to obtain high lateral resolution NSOM images over a wide-field of view (e.g. 50-100 {mu}m) within seconds.

  17. Field guide to adaptive optics

    CERN Document Server

    Tyson, Robert K

    2004-01-01

    ""...These field guides will be immensely useful to all scientists and engineers who wish to brush up on authentic definitions, equations, and tables of data in optics. And the format is really user friendly! I...wonder now how I ever got along in optics without this ready reference....a real winner!"" --Dr. Leno S. Pedrotti, Center for Occupational Research and Development (CORD) Third in the Field Guide Series, this is a summary of the methods for determining the requirements of an adaptive optics system, the performance of the system, and the requirements for the components of th

  18. Implementation of 3D Optical Scanning Technology for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Abdil Kuş

    2009-03-01

    Full Text Available Reverse engineering (RE is a powerful tool for generating a CAD model from the 3D scan data of a physical part that lacks documentation or has changed from the original CAD design of the part. The process of digitizing a part and creating a CAD model from 3D scan data is less time consuming and provides greater accuracy than manually measuring the part and designing the part from scratch in CAD. 3D optical scanning technology is one of the measurement methods which have evolved over the last few years and it is used in a wide range of areas from industrial applications to art and cultural heritage. It is also used extensively in the automotive industry for applications such as part inspections, scanning of tools without CAD definition, scanning the casting for definition of the stock (i.e. the amount of material to be removed from the surface of the castings model for CAM programs and reverse engineering. In this study two scanning experiments of automotive applications are illustrated. The first one examines the processes from scanning to re-manufacturing the damaged sheet metal cutting die, using a 3D scanning technique and the second study compares the scanned point clouds data to 3D CAD data for inspection purposes. Furthermore, the deviations of the part holes are determined by using different lenses and scanning parameters.

  19. Creating and Probing Graphene Electron Optics with Local Scanning Probes

    Science.gov (United States)

    Stroscio, Joseph

    Ballistic propagation and the light-like dispersion of graphene charge carriers make graphene an attractive platform for optics-inspired graphene electronics where gate tunable potentials can control electron refraction and transmission. In analogy to optical wave propagation in lenses, mirrors and metamaterials, gate potentials can be used to create a negative index of refraction for Veselago lensing and Fabry-Pérot interferometers. In circular geometries, gate potentials can induce whispering gallery modes (WGM), similar to optical and acoustic whispering galleries albeit on a much smaller length scale. Klein scattering of Dirac carriers plays a central role in determining the coherent propagation of electron waves in these resonators. In this talk, I examine the probing of electron resonators in graphene confined by linear and circular gate potentials with the scanning tunneling microscope (STM). The tip in the STM tunnel junction serves both as a tunable local gate potential, and as a probe of the graphene states through tunneling spectroscopy. A combination of a back gate potential, Vg, and tip potential, Vb, creates and controls a circular pn junction that confines the WGM graphene states. The resonances are observed in two separate channels in the tunneling spectroscopy experiment: first, by directly tunneling into the state at the bias energy eVb, and, second, by tunneling from the resonance at the Fermi level as the state is gated by the tip potential. The second channel produces a fan-like set of WGM peaks, reminiscent of the fringes seen in planar geometries by transport measurements. The WGM resonances split in a small applied magnetic field, with a large energy splitting approaching the WGM spacing at 0.5 T. These results agree well with recent theory on Klein scattering in graphene electron resonators. This work is done in collaboration with Y. Zhao, J. Wyrick, F.D. Natterer, J. F. Rodriquez-Nieva, C. Lewandoswski, K. Watanabe, T. Taniguchi, N. B

  20. Analysis of a copper sample for the CLIC ACS study in a field emission scanning microscope

    CERN Document Server

    Muranaka, Tomoko; Leifer, Klaus; Ziemann, Volker; Navitski, Aliaksandr; Müller, Günter

    2011-01-01

    We report measurements on a diamond turned Copper sample of material intended for the CLIC accelerating structures. The first part of the measurements was performed at Bergische Universität Wuppertal using a field emission scanning microscope to localize and characterize strong emission sites. In a second part the sample was investigated in an optical microscope, a white-light profilometer and scanning electron microscope in the microstructure laboratory in Uppsala to attempt to identify the features responsible for the field emission.

  1. Optical transmission scanning for damage quantification in impacted GFRP composites

    Science.gov (United States)

    Khomenko, Anton; Karpenko, Oleksii; Koricho, Ermias G.; Haq, Mahmoodul; Cloud, Gary L.; Udpa, Lalita

    2016-04-01

    Glass fiber reinforced polymer (GFRP) composites constitute nearly 90% of the global composites market and are extensively used in aerospace, marine, automotive and construction industries. While their advantages of lightweight and superior mechanical properties are well explored, non-destructive evaluation (NDE) techniques that allow for damage/defect detection and assessment of its extent and severity are not fully developed. Some of the conventional NDE techniques for GFRPs include ultrasonics, X-ray, IR thermography, and a variety of optical techniques. Optical methods, specifically measuring the transmission properties (e.g. ballistic optical imaging) of specimens, provide noninvasive, safe, inexpensive, and compact solutions and are commonly used in biomedical applications. In this work, this technique is adapted for rapid NDE of GFRP composites. In its basic form, the system for optical transmission scanning (OTS) consists of a light source (laser diode), a photo detector and a 2D translation stage. The proposed technique provides high-resolution, rapid and non-contact OT (optical transmittance)-scans, and does not require any coupling. The OTS system was used for inspection of pristine and low-velocity impacted (damaged) GFRP samples. The OT-scans were compared with conventional ultrasonic C-scans and showed excellent agreement but with better resolution. Overall, the work presented lays the groundwork for cost-effective, non-contact, and rapid NDE of GFRP composite structures.

  2. Hemianopic visual field defects elicit hemianopic scanning

    NARCIS (Netherlands)

    Tant, M.L.M.; Cornelissen, F. W.; Kooijman, A.C.; Brouwer, W.H.

    2002-01-01

    Previous explanations for the variability in success of compensating for homonymous hemianopia (HH) has been in terms of extent of the brain injury. In using on-line eye movement registrations, we simulated HH in 16 healthy subjects and compared their scanning performance on a dot counting task to t

  3. Optical design and development of a small barcode scanning module

    Science.gov (United States)

    Wike, Charles K., Jr.; Lindacher, Joseph M.

    1991-04-01

    High quality molded optical components and strict optomechanical tolerances have led to a new class of barcode scanner. Dynamic analysis of the scanning system and diffraction analysis of the thru focus laser spots are used to optimize the design. The outcome of this analysis is presented herein. 2 . 0

  4. Optical Near-Field Plates

    Science.gov (United States)

    2015-04-08

    color filtering and spectral imaging ,” Nat. Comm. 1, 59 (2010). 3. H.-F. Shi and L. J. Guo, “Design of Plasmonic Near Field Plate at Opitical...AFRL-OSR-VA-TR-2015-0085 OPTICAL NEAR-FILED PLATES Roberto Merlin UNIVERSITY OF MICHIGAN Final Report 04/08/2015 DISTRIBUTION A: Distribution...03-2015 Final 09/01/2009-12/31/2014 Optical Near-Field Plates FA9550-09-1-0636 erlin, Roberto, D. The University of Michigan Ann Arbor, MI 48109

  5. A molecular line scan in the Hubble deep field north

    Energy Technology Data Exchange (ETDEWEB)

    Decarli, R.; Walter, F.; Colombo, D.; Da Cunha, E.; Rix, H.-W. [Max-Planck Institut für Astronomie, Königstuhl 17, D-69117 Heidelberg (Germany); Carilli, C. [NRAO, Pete V. Domenici Array Science Center, P.O. Box O, Socorro, NM 87801 (United States); Riechers, D. [Cornell University, 220 Space Sciences Building, Ithaca, NY 14853 (United States); Cox, P.; Neri, R.; Downes, D. [IRAM, 300 rue de la Piscine, F-38406 Saint-Martin d' Hères (France); Aravena, M. [European Southern Observatory, Alonso de Cordova 3107, Casilla 19001, Vitacura Santiago (Chile); Bell, E. [Department of Astronomy, University of Michigan, 500 Church Street, Ann Arbor, MI 48109 (United States); Bertoldi, F. [Argelander Institute for Astronomy, University of Bonn, Auf dem Hügel 71, D-53121 Bonn (Germany); Daddi, E.; Sargent, M. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d' Astrophysique, CEA Saclay, Orme des Merisiers, F-91191 Gif-sur-Yvette cedex (France); Dickinson, M. [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States); Ellis, R. [Astronomy Department, California Institute of Technology, MC105-24, Pasadena, CA 91125 (United States); Lentati, L.; Maiolino, R. [Cavendish Laboratory, University of Cambridge, 19 J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Menten, K. M., E-mail: decarli@mpia.de [Max-Planck-Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); and others

    2014-02-20

    We present a molecular line scan in the Hubble Deep Field North (HDF-N) that covers the entire 3 mm window (79-115 GHz) using the IRAM Plateau de Bure Interferometer. Our CO redshift coverage spans z ≲ 0.45, 1 ≲ z ≲ 1.9 and all z ≳ 2. We reach a CO detection limit that is deep enough to detect essentially all z > 1 CO lines reported in the literature so far. We have developed and applied different line-searching algorithms, resulting in the discovery of 17 line candidates. We estimate that the rate of false positive line detections is ∼2/17. We identify optical/NIR counterparts from the deep ancillary database of the HDF-N for seven of these candidates and investigate their available spectral energy distributions. Two secure CO detections in our scan are identified with star-forming galaxies at z = 1.784 and at z = 2.047. These galaxies have colors consistent with the 'BzK' color selection and they show relatively bright CO emission compared with galaxies of similar dust continuum luminosity. We also detect two spectral lines in the submillimeter galaxy HDF 850.1 at z = 5.183. We consider an additional nine line candidates as high quality. Our observations also provide a deep 3 mm continuum map (1σ noise level = 8.6 μJy beam{sup –1}). Via a stacking approach, we find that optical/MIR bright galaxies contribute only to <50% of the star formation rate density at 1 < z < 3, unless high dust temperatures are invoked. The present study represents a first, fundamental step toward an unbiased census of molecular gas in 'normal' galaxies at high-z, a crucial goal of extragalactic astronomy in the ALMA era.

  6. Linear optical characterization of transparent thin films by the Z-scan technique.

    Science.gov (United States)

    Boudebs, Georges; Fedus, Kamil

    2009-07-20

    We report experimental characterization of a very small rectangular phase shift (Z-scan technique. The numerical simulations as well as the experimental results reveal a peak-valley configuration in the far-field normalized transmittance, allowing us to determine the sign of the dephasing. The conditions necessary to obtain useful Z-scan traces are discussed. We provide simple linear expressions relating the measured signal to the phase shift. A very good agreement between calculated and experimental Z-scan profiles validates our approach. We show that a very well known nonlinear characterization technique can be extended for linear optical parameter estimation (as refractive index or thickness).

  7. Scanning near-field infrared micro-spectroscopy on buried InAs quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbacher, Markus; Jacob, Rainer; Winnerl, Stephan; Schneider, Harald; Helm, Manfred [Institut fuer Ionenstrahlphysik und Materialforschung, Helmholtz-Zentrum Dresden-Rossendorf (Germany); Wenzel, Marc Tobias; Krysztofinski, Anja; Ribbeck, Hans-Georg von; Eng, Lukas M. [Institut fuer Angewandte Photophysik, TU Dresden (Germany)

    2012-07-01

    Providing an optical resolution on the nanometer length scale, scanning near-field optical microscopy (SNOM) turned out to be a capable technique to investigate the optical properties of perovskites, buried semiconductors and single quantum dots. Thereby, the line-width of the observed resonances (5 - 8 meV) is significantly smaller than the inhomogeneously broadened line-width of other spectroscopic measurements. Using a scattering-type-SNOM (s-SNOM) combined with a tunable free-electron laser (FEL) light source we investigated the electronic structure of single InAs quantum dots, capped under a 70 nm thick GaAs layer. Spectroscopic near-field scans clearly identified two inter-sublevel transitions within the quantum dots at 85 meV and 120 meV, contrasting from the surrounding medium. Moreover, spatially scanning the s-SNOM tip at fixed excitation energies allowed mapping the 3D distribution of such buried quantum dots.

  8. Hybrid wide-field and scanning microscopy for high-speed 3D imaging.

    Science.gov (United States)

    Duan, Yubo; Chen, Nanguang

    2015-11-15

    Wide-field optical microscopy is efficient and robust in biological imaging, but it lacks depth sectioning. In contrast, scanning microscopic techniques, such as confocal microscopy and multiphoton microscopy, have been successfully used for three-dimensional (3D) imaging with optical sectioning capability. However, these microscopic techniques are not very suitable for dynamic real-time imaging because they usually take a long time for temporal and spatial scanning. Here, a hybrid imaging technique combining wide-field microscopy and scanning microscopy is proposed to accelerate the image acquisition process while maintaining the 3D optical sectioning capability. The performance was demonstrated by proof-of-concept imaging experiments with fluorescent beads and zebrafish liver.

  9. Quantum optical dipole radiation fields

    CERN Document Server

    Stokes, Adam

    2016-01-01

    We introduce quantum optical dipole radiation fields defined in terms of photon creation and annihilation operators. These fields are identified through their spatial dependence, as the components of the total fields that survive infinitely far from the dipole source. We use these radiation fields to perturbatively evaluate the electromagnetic radiated energy-flux of the excited dipole. Our results indicate that the standard interpretation of a bare atom surrounded by a localised virtual photon cloud, is difficult to sustain, because the radiated energy-flux surviving infinitely far from the source contains virtual contributions. It follows that there is a clear distinction to be made between a radiative photon defined in terms of the radiation fields, and a real photon, whose identification depends on whether or not a given process conserves the free energy. This free energy is represented by the difference between the total dipole-field Hamiltonian and its interaction component.

  10. Sensor-Based Technique for Manually Scanned Hand-Held Optical Coherence Tomography Imaging

    Directory of Open Access Journals (Sweden)

    Paritosh Pande

    2016-01-01

    Full Text Available Hand-held optical coherence tomography (OCT imaging probes offer flexibility to image sites that are otherwise challenging to access. While the majority of hand-held imaging probes utilize galvanometer- or MEMS-scanning mirrors to transversely scan the imaging beam, these probes are commonly limited to lateral fields-of-view (FOV of only a few millimeters. The use of a freehand manually scanned probe can significantly increase the lateral FOV. However, using the traditional fixed-rate triggering scheme for data acquisition in a manually scanned probe results in imaging artifacts due to variations in the scan velocity of the imaging probe. These artifacts result in a structurally inaccurate image of the sample. In this paper, we present a sensor-based manual scanning technique for OCT imaging, where real-time feedback from an optical motion sensor is used to trigger data acquisition. This technique is able to circumvent the problem of motion artifacts during manual scanning by adaptively altering the trigger rate based on the instantaneous scan velocity, enabling OCT imaging over a large lateral FOV. The feasibility of the proposed technique is demonstrated by imaging several biological and nonbiological samples.

  11. Processing of Graphene combining Optical Detection and Scanning Probe Lithography

    Directory of Open Access Journals (Sweden)

    Zimmermann Sören

    2015-01-01

    Full Text Available This paper presents an experimental setup tailored for robotic processing of graphene with in-situ vision based control. A robust graphene detection approach is presented applying multiple image processing operations of the visual feedback provided by a high-resolution light microscope. Detected graphene flakes can be modified using a scanning probe based lithographical process that is directly linked to the in-situ optical images. The results of this process are discussed with respect to further application scenarios.

  12. Progress of MEMS Scanning Micromirrors for Optical Bio-Imaging

    Directory of Open Access Journals (Sweden)

    Lih Y. Lin

    2015-11-01

    Full Text Available Microelectromechanical systems (MEMS have an unmatched ability to incorporate numerous functionalities into ultra-compact devices, and due to their versatility and miniaturization, MEMS have become an important cornerstone in biomedical and endoscopic imaging research. To incorporate MEMS into such applications, it is critical to understand underlying architectures involving choices in actuation mechanism, including the more common electrothermal, electrostatic, electromagnetic, and piezoelectric approaches, reviewed in this paper. Each has benefits and tradeoffs and is better suited for particular applications or imaging schemes due to achievable scan ranges, power requirements, speed, and size. Many of these characteristics are fabrication-process dependent, and this paper discusses various fabrication flows developed to integrate additional optical functionality beyond simple lateral scanning, enabling dynamic control of the focus or mirror surface. Out of this provided MEMS flexibility arises some challenges when obtaining high resolution images: due to scanning non-linearities, calibration of MEMS scanners may become critical, and inherent image artifacts or distortions during scanning can degrade image quality. Several reviewed methods and algorithms have been proposed to address these complications from MEMS scanning. Given their impact and promise, great effort and progress have been made toward integrating MEMS and biomedical imaging.

  13. Two-axis polydimethylsiloxane-based electromagnetic microelectromechanical system scanning mirror for optical coherence tomography

    Science.gov (United States)

    Kim, Sehui; Lee, Changho; Kim, Jin Young; Kim, Jeehyun; Lim, Geunbae; Kim, Chulhong

    2016-10-01

    Compact size and fast imaging abilities are key requirements for the clinical implementation of an optical coherence tomography (OCT) system. Among the various small-sized technology, a microelectromechanical system (MEMS) scanning mirror is widely used in a miniaturized OCT system. However, the complexities of conventional MEMS fabrication processes and relatively high costs have restricted fast clinical translation and commercialization of the OCT systems. To resolve these problems, we developed a two-axis polydimethylsiloxane (PDMS)-based MEMS (2A-PDMS-MEMS) scanning mirror through simple processes with low costs. It had a small size of 15×15×15 mm3, was fast, and had a wide scanning range at a low voltage. The AC/DC responses were measured to evaluate the performance of the 2A-PDMS-MEMS scanning mirror. The maximum scanning angles were measured as ±16.6 deg and ±11.6 deg along the X and Y axes, respectively, and the corresponding field of view was 29.8 mm×20.5 mm with an optical focal length of 50 mm. The resonance frequencies were 82 and 57 Hz along the X and Y axes, respectively. Finally, in vivo B-scan and volumetric OCT images of human fingertips and palms were successfully acquired using the developed SD-OCT system based on the 2A-PDMS-MEMS scanning mirror.

  14. Light amplification by stimulated emission from an optically pumped molecular junction in a scanning tunneling microscope

    CERN Document Server

    Braun, K; Wang, X; Adler, H; Peisert, H; Chasse, T; Zhang, D; Meixner, A J

    2013-01-01

    Here, we introduce and experimentally demonstrate optical amplification and stimulated emission from a single optically pumped molecular tunneling junction of a scanning tunneling microscope. The gap between a sharp gold tip and a flat gold substrate covered with a self-assembled monolayer of 5-chloro-2-mercaptobenzothiazole molecules forms an extremely small optical gain medium. When electrons tunnel from the molecules highest occupied molecular orbital to the tip, holes are left behind. These can be repopulated by hot electrons induced by the laser-driven plasmon oscillation on the metal surfaces enclosing the cavity. Solving the laser-rate equations for this system shows that the repopulation process can be efficiently stimulated by the gap modes near field, TERS scattering from neighboring molecules acting as an optical seed. Our results demonstrate how optical enhancement inside the plasmonic cavity can be further increased by a stronger localization via tunneling through molecules. We anticipate that st...

  15. Light scattering in optical CT scanning of Presage dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Y; Adamovics, J; Cheeseborough, J C; Chao, K S; Wuu, C S, E-mail: yx2010@columbia.ed

    2010-11-01

    The intensity of the scattered light from the Presage dosimeters was measured using a Thorlabs PM100D optical power meter (Thorlabs Inc, Newton, NJ) with an optical sensor of 1 mm diameter sensitive area. Five Presage dosimeters were made as cylinders of 15.2 cm, 10 cm, 4 cm diameters and irradiated with 6 MV photons using a Varian Clinac 2100EX. Each dosimeter was put into the scanning tank of an OCTOPUS' optical CT scanner (MGS Research Inc, Madison, CT) filled with a refractive index matching liquid. A laser diode was positioned at one side of the water tank to generate a stationary laser beam of 0.8 mm width. On the other side of the tank, an in-house manufactured positioning system was used to move the optical sensor in the direction perpendicular to the outgoing laser beam from the dosimeters at an increment of 1 mm. The amount of scattered photons was found to be more than 1% of the primary light signal within 2 mm from the laser beam but decreases sharply with increasing off-axis distance. The intensity of the scattered light increases with increasing light attenuations and/or absorptions in the dosimeters. The scattered light at the same off-axis distance was weaker for dosimeters of larger diameters and for larger detector-to-dosimeter distances. Methods for minimizing the effect of the light scattering in different types of optical CT scanners are discussed.

  16. Perturbation of near-field scan from connected cables

    DEFF Research Database (Denmark)

    Sørensen, Morten; Franek, Ondrej; Pedersen, Gert Frølund;

    2012-01-01

    The perturbation of near-fields scan from connected cables are investigated and how to handle the cables is discussed. A connected cable induced small but theoretical detectable changes in the near-field. This change can be seen in Huygens’ box simulations (equivalent source currents on a box...

  17. Controlling the transition of bright and dark states via scanning dressing field

    Science.gov (United States)

    Li, Peiying; Zheng, Huaibin; Zhang, Yiqi; Sun, Jia; Li, Changbiao; Huang, Gaoping; Zhang, Zhaoyang; Li, Yuanyuan; Zhang, Yanpeng

    2013-03-01

    We report the transitions between the bright and dark states of singly-dressed four-wave mixing (FWM) and doubly-dressed FWMs, and the corresponding probe transmissions by scanning the dressing field frequency detuning in a five-level atomic system. Moreover, doubly-dressed six-wave mixing with avoided-crossing plots and triple-dressed eight-wave mixing with the comparison of scanning probe field and dressing field are studied. Such controlled transitions of the nonlinear optical signals can be realizable not only in atomic vapors but also in solid medium. The investigations maybe have potential applications in optical communication, quantum information processing and optoelectronic devices, and maybe also provide a sensitive probe method to study the dressing effect.

  18. Visual Scanning Hartmann Optical Tester (VSHOT) Uncertainty Analysis (Milestone Report)

    Energy Technology Data Exchange (ETDEWEB)

    Gray, A.; Lewandowski, A.; Wendelin, T.

    2010-10-01

    In 1997, an uncertainty analysis was conducted of the Video Scanning Hartmann Optical Tester (VSHOT). In 2010, we have completed a new analysis, based primarily on the geometric optics of the system, and it shows sensitivities to various design and operational parameters. We discuss sources of error with measuring devices, instrument calibrations, and operator measurements for a parabolic trough mirror panel test. These help to guide the operator in proper setup, and help end-users to understand the data they are provided. We include both the systematic (bias) and random (precision) errors for VSHOT testing and their contributions to the uncertainty. The contributing factors we considered in this study are: target tilt; target face to laser output distance; instrument vertical offset; laser output angle; distance between the tool and the test piece; camera calibration; and laser scanner. These contributing factors were applied to the calculated slope error, focal length, and test article tilt that are generated by the VSHOT data processing. Results show the estimated 2-sigma uncertainty in slope error for a parabolic trough line scan test to be +/-0.2 milliradians; uncertainty in the focal length is +/- 0.1 mm, and the uncertainty in test article tilt is +/- 0.04 milliradians.

  19. Integrated optics in an electrically scanned imaging Fourier transform spectrometer

    Science.gov (United States)

    Breckinridge, James B. (Inventor); Ocallaghan, Fred G. (Inventor)

    1982-01-01

    An efficient, lightweight and stable, Fourier transform spectrometer was developed. The mechanical slide mechanism needed to create a path difference was eliminated by the use of retro-reflecting mirrors in a monolithic interferometer assembly in which the mirrors are not at 90 degrees to the propagation vector of the radiation, but rather at a small angle. The resulting plane wave fronts create a double-sided inteferogram of the source irradiance distribution which is detected by a charge-coupled device image sensor array. The position of each CCD pixel in the array is an indication of the path difference between the two retro-reflecting mirrors in the monolithic optical structure. The Fourier transform of the signals generated by the image sensor provide the spectral irradiance distribution of the source. For imaging, the interferometer assembly scans the source of irradiation by moving the entire instrument, such as would occur if it was fixedly mounted to a moving platform, i.e., a spacecraft. During scanning, the entrace slot to the monolithic optical structure sends different pixels to corresponding interferograms detected by adjacent columns of pixels of the image sensor.

  20. Closed-loop optical stabilization and digital image registration in adaptive optics scanning light ophthalmoscopy.

    Science.gov (United States)

    Yang, Qiang; Zhang, Jie; Nozato, Koji; Saito, Kenichi; Williams, David R; Roorda, Austin; Rossi, Ethan A

    2014-09-01

    Eye motion is a major impediment to the efficient acquisition of high resolution retinal images with the adaptive optics (AO) scanning light ophthalmoscope (AOSLO). Here we demonstrate a solution to this problem by implementing both optical stabilization and digital image registration in an AOSLO. We replaced the slow scanning mirror with a two-axis tip/tilt mirror for the dual functions of slow scanning and optical stabilization. Closed-loop optical stabilization reduced the amplitude of eye-movement related-image motion by a factor of 10-15. The residual RMS error after optical stabilization alone was on the order of the size of foveal cones: ~1.66-2.56 μm or ~0.34-0.53 arcmin with typical fixational eye motion for normal observers. The full implementation, with real-time digital image registration, corrected the residual eye motion after optical stabilization with an accuracy of ~0.20-0.25 μm or ~0.04-0.05 arcmin RMS, which to our knowledge is more accurate than any method previously reported.

  1. Scanning near field microwave microscopy based on an active resonator

    Science.gov (United States)

    Qureshi, Naser; Kolokoltsev, Oleg; Ordonez-Romero, Cesar Leonardo

    2014-03-01

    A large number of recent implementations of near field scanning microwave microscopy (NFSMM) have been based on the perturbation of a resonant cavity connected to a sharp scanning probe. In this work we present results from an alternative approach: the perturbation of a microwave source connected to a scanning tip. Based on a yittrium iron garnet (YIG) cavity ring resonator this scanning probe system has a quality factor greater than 106, which allows us to detect very small frequency shifts, which translates to a very high sensitivity in sample impedance measurements. Using a selection of representative semiconductor, metal and biological samples we show how this approach leads to unusually high sensitivity and spatial resolution. Work supported by a grant from PAPIIT, UNAM 104513.

  2. Optical scanning holography based on compressive sensing using a digital micro-mirror device

    Science.gov (United States)

    A-qian, Sun; Ding-fu, Zhou; Sheng, Yuan; You-jun, Hu; Peng, Zhang; Jian-ming, Yue; xin, Zhou

    2017-02-01

    Optical scanning holography (OSH) is a distinct digital holography technique, which uses a single two-dimensional (2D) scanning process to record the hologram of a three-dimensional (3D) object. Usually, these 2D scanning processes are in the form of mechanical scanning, and the quality of recorded hologram may be affected due to the limitation of mechanical scanning accuracy and unavoidable vibration of stepper motor's start-stop. In this paper, we propose a new framework, which replaces the 2D mechanical scanning mirrors with a Digital Micro-mirror Device (DMD) to modulate the scanning light field, and we call it OSH based on Compressive Sensing (CS) using a digital micro-mirror device (CS-OSH). CS-OSH can reconstruct the hologram of an object through the use of compressive sensing theory, and then restore the image of object itself. Numerical simulation results confirm this new type OSH can get a reconstructed image with favorable visual quality even under the condition of a low sample rate.

  3. Electron optics of multi-beam scanning electron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Mohammadi-Gheidari, A., E-mail: A.M.Gheidari@tudelft.nl [Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands); Kruit, P. [Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands)

    2011-07-21

    We have developed a multi-beam scanning electron microscope (MBSEM), which delivers a square array of 196 focused beams onto a sample with a resolution and current per beam comparable to a state of the art single beam SEM. It consists of a commercially available FEI Nova-nano 200 SEM column equipped with a novel multi-electron beam source module. The key challenge in the electron optical design of the MBSEM is to minimize the off-axial aberrations of the lenses. This article addresses the electron optical design of the system and presents the result of optics simulations for a specific setting of the system. It is shown that it is possible to design a system with a theoretical axial spot size of 1.2 nm at 15 kV with a probe current of 26 pA. The off-axial aberrations for the outermost beam add up 0.8 nm, increasing the probe size to 1.5 nm.

  4. Magnetic field concentrator for probing optical magnetic metamaterials.

    Science.gov (United States)

    Antosiewicz, Tomasz J; Wróbel, Piotr; Szoplik, Tomasz

    2010-12-06

    Development of all dielectric and plasmonic metamaterials with a tunable optical frequency magnetic response creates a need for new inspection techniques. We propose a method of measuring magnetic responses of such metamaterials within a wide range of optical frequencies with a single probe. A tapered fiber probe with a radially corrugated metal coating concentrates azimuthally polarized light in the near-field into a subwavelength spot the longitudinal magnetic field component which is much stronger than the perpendicular electric one. The active probe may be used in a future scanning near-field magnetic microscope for studies of magnetic responses of subwavelength elementary cells of metamaterials.

  5. Spectral Shaping in Rapid Scanning Optical Delay Line of Optical Coherence Tomography

    Institute of Scientific and Technical Information of China (English)

    吴继刚; 薛平; 孙汕; 郭继华

    2003-01-01

    A small spatial optical filter is put into the rapid-scanning optical delay line (RSOD) to shape the spectrum of the reference beam in optical coherence tomography (OCT). The experimental results show that the 1ongitudinal resolution can be improved by a factor of 81% with this method, while at the same time, the signal-to-noise ratio of the OCT system is not much affected. This method can be used in OCT systems that use RSOD as the reference arm with a light source of superluminescent diodes, femtosecond lasers and crystal fibre as well.

  6. Foveated scanning: dynamic monodimensional enlargement of resolved field of view in lenses of scanner systems.

    Science.gov (United States)

    Javaherian, Farhang; Rashidian, Bizhan

    2016-09-10

    An inconsistency between the circular symmetric geometry of conventional optical imagers and the geometry of long linear sensors used in today's line-scan cameras results in suboptimal separate design of optics and electronics of scanner systems. Based on the method of foveated optical imaging, a technique named foveated scanning (FS) is proposed in this paper. The FS technique is employed to enlarge the one-dimensional resolved field of view (RFOV) of conventional lenses and permits optimized performance on a line-of-interest in the image plane where the optoelectronic sensor is located. The achieved enlargement of RFOV is verified on a proof-of-concept basic telephoto lens. Both modulation transfer function analysis and the imaging simulation of a standard target have been performed. Results show a twofold increase in RFOV by this technique.

  7. Mono-Cycle Photonics and Optical Scanning Tunneling Microscopy Route to Femtosecond Ångstrom Technology

    CERN Document Server

    Yamashita, Mikio; Morita, Ryuji

    2005-01-01

    "Mono-Cycle Photonics and Optical Scanning Tunneling Microscopy" deals with both the ultrashort laser-pulse technology in the few- to mono-cycle region and the laser-surface-controlled scanning-tunneling microscopy (STM) extending into the spatiotemporal extreme technology. The former covers the theory of nonlinear pulse propagation beyond the slowly-varing-envelope approximation, the generation and active chirp compensation of ultrabroadband optical pulses, the amplitude and phase characterization of few- to mono-cycle pulses, and the feedback field control for the mono-cycle-like pulse generation. In addition, the wavelength-multiplex shaping of ultrabroadband pulse is described. The latter covers the CW-laser-excitation STM, the femtosecond-time-resolved STM and atomic-level surface phenomena controlled by femtosecond pulses.

  8. Fiber-optic raster scanning two-photon endomicroscope using a tubular piezoelectric actuator

    Science.gov (United States)

    Do, Dukho; Yoo, Hongki; Gweon, Dae-Gab

    2014-06-01

    A nonresonant, fiber-optic raster scanning endomicroscope was developed using a quarter-tubular piezoelectric (PZT) actuator. A fiber lever mechanism was utilized to enhance the small actuation range of the tubular PZT actuator and to increase its field-of-view. Finite element method simulation of the endoscopic probe was conducted for various conditions to maximize its scanning range. After fabricating the probe using a double clad fiber, we obtained two-photon fluorescence images using raster beam scanning of the fiber. The outer diameter of the probe was 3.5 mm and its rigid distal length was 30 mm including a high numerical aperture gradient index lens. These features are sufficient for input into the instrumental channel of a commercial colonoscope or gastroscope to obtain high resolution images in vivo.

  9. Helmholtz Hodge decomposition of scalar optical fields.

    Science.gov (United States)

    Bahl, Monika; Senthilkumaran, P

    2012-11-01

    It is shown that the vector field decomposition method, namely, the Helmholtz Hodge decomposition, can also be applied to analyze scalar optical fields that are ubiquitously present in interference and diffraction optics. A phase gradient field that depicts the propagation and Poynting vector directions can hence be separated into solenoidal and irrotational components.

  10. All-optical photoacoustic microscopy using a MEMS scanning mirror

    Science.gov (United States)

    Chen, Sung-Liang; Xie, Zhixing; Ling, Tao; Wei, Xunbin; Guo, L. Jay; Wang, Xueding

    2013-03-01

    It has been studied that a potential marker to obtain prognostic information about bladder cancer is tumor neoangiogenesis, which can be quantified by morphometric characteristics such as microvascular density. Photoacoustic microscopy (PAM) can render sensitive three-dimensional (3D) mapping of microvasculature, providing promise to evaluate the neoangiogenesis that is closely related to the diagnosis of bladder cancer. To ensure good image quality, it is desired to acquire bladder PAM images from its inside via the urethra, like conventional cystoscope. Previously, we demonstrated all-optical PAM systems using polymer microring resonators to detect photoacoustic signals and galvanometer mirrors for laser scanning. In this work, we build a miniature PAM system using a microelectromechanical systems (MEMS) scanning mirror, demonstrating a prototype of an endoscopic PAM head capable of high imaging quality of the bladder. The system has high resolutions of 17.5 μm in lateral direction and 19 μm in the axial direction at a distance of 5.4 mm. Images of printed grids and the 3D structure of microvasculature in animal bladders ex vivo by the system are demonstrated.

  11. Surface Plasmon mediated near-field imaging and optical addressing in nanoscience

    CERN Document Server

    Drezet, A; Krenn, J R; Brun, M; Huant, S

    2007-01-01

    We present an overview of recent progress in plasmonics. We focus our study on the observation and excitation of surface plasmon polaritons (SPPs) with optical near-field microscopy. We discuss in particular recent applications of photon scanning tunnelling microscope (PSTM) for imaging of SPP propagating in metal and dielectric wave guides. We show how near-field scanning optical microscopy (NSOM) can be used to optically and actively address remotely nano-objects such as quantum dots. Additionally we compare results obtained with near-field microscopy to those obtained with other optical far-field methods of analysis such as leakage radiation microscopy (LRM).

  12. Scanning second-harmonic optical microscopy of self-assembled InAlGaAs quantum dots

    DEFF Research Database (Denmark)

    Vohnsen, B.; Bozhevolnyi, S. I.; Pedersen, K.

    2001-01-01

    or in the illumination itself. Thus, a combination of scanning microscopy with SH detection may be a highly suitable candidate to reveal the presence of QD's embedded in an otherwise isotropic material. We have used scanning far-field (SFOM) and scanning near field optical microscopy (SNOM) techniques to locally probe......Microscopy provides a suitable technique for local probing of small ensembles of (or even individual) QD's, and when combined with the detection of second-harmonic (SH) generation the technique becomes suitable to reveal tiny changes of symmetry originating either in the material structures...

  13. Vectorial optical fields fundamentals and applications

    CERN Document Server

    2014-01-01

    Polarization is a vector nature of light that plays an important role in optical science and engineering. While existing textbook treatments of light assume beams with spatially homogeneous polarization, there is an increasing interest in vectorial optical fields with spatially engineered states of polarization. New effects and phenomena have been predicted and observed for light beams with these unconventional polarization states. This edited review volume aims to provide a comprehensive overview and summarize the latest developments in this important emerging field of optics. This book will cover the fundamentals including mathematical and physical descriptions, experimental generation, manipulation, focusing, propagation, and the applications of the engineered vectorial optical fields in focal field engineering, plasmonic focusing and optical antenna, single molecular imaging, optical tweezers/trapping, as well as optical measurements and instrumentations. Readership: Students, professionals, post-graduat...

  14. Application of optical scanning for measurements of castings and cores

    Directory of Open Access Journals (Sweden)

    M. Wieczorowski

    2010-01-01

    Full Text Available In the paper application of non destructive method for dimensional control of elements in initial phase of car manufacturing, at Volks-wagen Poznań foundry was presented. VW foundry in Poznań is responsible of series production of chill and dies castings made of light alloys using contemporary technologies. Castings have a complex shape: they are die castings of housings for steering columns and gravity chill castings of cylinder heads, for which cores are manufactured using both hot box and cold box method. Manufacturing capabilities of VW foundry in Poznań reach 26.000 tons of aluminum castings per year. Optical system ATOS at Volkswagen Poznań foundry is used to digitize object and determination of all dimensions and shapes of inspected object. This technology is applied in car industry, reverse engineering, quality analysis and control and to solve many similar tasks. System is based on triangulation: sensor head projects different fringes patterns onto a measured object while scanner observes their trajectories using two cameras. Basing on optical transform equations a processing unit automatically and with a great accuracy calculates 3D coordinates for every pixel of camera. Depending on camera reso-lution as an effect of such a scan we obtain a cloud of up to 4 million points for every single measurement. In the paper examples of di-mensional analysis regarding castings and cores were presented.

  15. Direct current scanning field emission microscope integrated with existing scanning electron microscope

    Science.gov (United States)

    Wang, Tong; Reece, Charles E.; Sundelin, Ronald M.

    2002-09-01

    Electron field emission (FE) from broad-area metal surfaces is known to occur at much lower electric field than predicted by Fowler-Nordheim law. Although micron or submicron particles are often observed at such enhanced field emission (EFE) sites, the strength and number of emitting sites and the causes of EFE strongly depend on surface preparation and handling, and the physical mechanism of EFE remains unknown. To systematically investigate the sources of this emission, a dc scanning field emission microscope (SFEM) has been built as an extension to an existing commercial scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer for emitter characterization. In the SFEM chamber of ultrahigh vacuum (approx10-9 Torr), a sample is moved laterally in a raster pattern (2.5 mum step resolution) under a high voltage anode microtip for field emission detection and localization. The sample is then transferred under vacuum by a hermetic retractable linear transporter to the SEM chamber for individual emitter site characterization. Artificial marks on the sample surface serve as references to convert x, y coordinates of emitters in the SFEM chamber to corresponding positions in the SEM chamber with a common accuracy of plus-or-minus100-200 mum in x and y. Samples designed to self-align in sample holders are used in each chamber, allowing them to retain position registration after non-in situ processing to track interesting features. No components are installed inside the SEM except the sample holder, which does not affect the routine operation of the SEM. The apparatus is a system of low cost and maintenance and significant operational flexibility. Field emission sources from planar niobium--the material used in high-field rf superconducting cavities for particle accelerator--have been studied after different surface preparations, and significantly reduced field emitter density has been achieved by refining the preparation process based on scan

  16. Review of near-field optics and superlenses for sub-diffraction-limited nano-imaging

    Directory of Open Access Journals (Sweden)

    Wyatt Adams

    2016-10-01

    Full Text Available Near-field optics and superlenses for imaging beyond Abbe’s diffraction limit are reviewed. A comprehensive and contemporary background is given on scanning near-field microscopy and superlensing. Attention is brought to recent research leveraging scanning near-field optical microscopy with superlenses for new nano-imaging capabilities. Future research directions are explored for realizing the goal of low-cost and high-performance sub-diffraction-limited imaging systems.

  17. Optical near-field microscopy of light focusing through a photonic crystal flat lens.

    Science.gov (United States)

    Fabre, Nathalie; Lalouat, Loïc; Cluzel, Benoit; Mélique, Xavier; Lippens, Didier; de Fornel, Frédérique; Vanbésien, Olivier

    2008-08-15

    We report here the direct observation by using a scanning near-field microscopy technique of the light focusing through a photonic crystal flat lens designed and fabricated to operate at optical frequencies. The lens is fabricated using a III-V semiconductor slab, and we directly visualize the propagation of the electromagnetic waves by using a scanning near-field optical microscope. We directly evidence spatially, as well as spectrally, the focusing operating regime of the lens. At last, in light of the experimental scanning near-field optical microscope pictures, we discuss the lens ability to focus light at a subwavelength scale.

  18. Near-field scanning microwave microscopy of microwave devices

    Science.gov (United States)

    Vlahacos, C. P.; Steinhauer, David E.; Dutta, S.; Anlage, S. M.; Wellstood, F. C.; Newman, H.

    1997-03-01

    We have developed a scanning microwave microscope which can presently image features with a spatial resolution of 10-100 μm in the frequency range 5-15 GHz.(C. P. Vlahacos, et al.), Appl. Phys. Lett. 69, 3272 (1996).^,(S. M. Anlage, et al.), IEEE. Trans. Appl. Supercond. (1997). The microscope consists of a resonant section of a coaxial cable which is terminated with a small-diameter open-ended coaxial probe. Images are made by scanning the sample under the probe while recording the induced near-field microwave voltage as a function of sample position. We will present images for several microwave devices, including an X-band microstrip planar ferrite circulator and a high-temperature superconducting microstrip YBa_2Cu_3O_7-δ resonator, and compare them to the calculated field profiles.

  19. Single molecule mapping of the optical field distribution of probes for near-field microscopy

    NARCIS (Netherlands)

    Veerman, J.A.; Garcia Parajo, M.F.; Kuipers, L.; van Hulst, N.F.

    1999-01-01

    The most difficult task in near-field scanning optical microscopy (NSOM) is to make a high quality subwavelength aperture probe, Recently we have developed high definition NSOM probes by focused ion beam (FIB) milling. These probes have a higher brightness, better polarization characteristics,

  20. Single molecule mapping of the optical field distribution of probes for near-field microscopy

    NARCIS (Netherlands)

    Veerman, J.A.; Garcia-Parajo, M.F.; Kuipers, L.; Hulst, van N.F.

    1999-01-01

    The most difficult task in near-field scanning optical microscopy (NSOM) is to make a high quality subwavelength aperture probe, Recently we have developed high definition NSOM probes by focused ion beam (FIB) milling. These probes have a higher brightness, better polarization characteristics, bette

  1. Characterization of Si3N4/SiO2 optical channel waveguides by photon scanning tunneling microscopy

    Science.gov (United States)

    Wang, Yan; Chudgar, Mona H.; Jackson, Howard E.; Miller, Jeffrey S.; De Brabander, Gregory N.; Boyd, Joseph T.

    1993-01-01

    Photon scanning tunneling microscopy (PSTM) is used to characterize Si3N4/Si02 optical channel waveguides being used for integrated optical-micromechanical sensors. PSTM utilizes an optical fiber tapered to a fine point which is piezoelectrically positioned to measure the decay of the evanescent field intensity associated with the waveguide propagating mode. Evanescent field decays are recorded for both ridge channel waveguides and planar waveguide regions. Values for the local effective refractive index are calculated from the data for both polarizations and compared to model calculations.

  2. Electric field effects in scanning tunneling microscope imaging

    DEFF Research Database (Denmark)

    Stokbro, Kurt; Quaade, Ulrich; Grey, Francois

    1998-01-01

    We present a high-voltage extension of the Tersoff-Hamann theory of scanning tunneling microscope (STM) images, which includes the effect of the electric field between the tip and the sample. The theoretical model is based on first-principles electronic structure calculations and has no adjustable...... parameters. We use the method to calculate theoretical STM images of the monohydrate Si(100)-H(2x1) surface with missing hydrogen defects at -2V and find an enhanced corrugation due to the electric field, in good agreement with experimental images....

  3. Gauge Field Optics with Anisotropic Media

    CERN Document Server

    Liu, Fu

    2014-01-01

    By considering gauge transformations on the macroscopic Maxwell's equations, a two dimensional gauge field, with its pseudo magnetic field in the real space, is identified as tilted anisotropy in the constitutive parameters. We show that optical spin Hall effect and one-way edge states become possible simply by using anisotropic media with broadband response. The proposed gauge field also allows us to design an optical isolator based on the Aharonov-Bohm effect. Our approach will be useful in spoof magneto-optics with arbitrary magnetic fields mimicked by metamaterials with subwavelength unit cells. It also serves as a generic way to design polarization-dependent devices.

  4. Rapid-scan acousto-optical delay line with 34 kHz scan rate and 15 as precision.

    Science.gov (United States)

    Schubert, O; Eisele, M; Crozatier, V; Forget, N; Kaplan, D; Huber, R

    2013-08-01

    An optical fast scan delay exploiting the near-collinear interaction between a train of ultrashort optical pulses and an acoustic wave propagating in a birefringent crystal is introduced. In combination with a femtosecond Er:fiber laser, the scheme is shown to delay few femtosecond pulses by up to 6 ps with a precision of 15 as. A resolution of 5 fs is obtained for a single sweep at a repetition rate of 34 kHz. This value can be improved to 39 as for multiple scans at a total rate of 0.3 kHz.

  5. Characterization of near-field optical probes

    DEFF Research Database (Denmark)

    Vohnsen, Brian; Bozhevolnyi, Sergey I.

    1999-01-01

    Radiation and collection characteristics of four different near-field optical-fiber probes, namely, three uncoated probes and an aluminium-coated small-aperture probe, are investigated and compared. Their radiation properties are characterized by observation of light-induced topography changes...... in a photo-sensitive film illuminated with the probes, and it is confirmed that the radiated optical field is unambigiously confined only for the coated probe. Near-field optical imaging of a standing evanescent-wave pattern is used to compare the detection characteristics of the probes, and it is concluded...... that, for the imaging of optical-field intensity distributions containing predominantly evanescent-wave components, a sharp uncoated tip is the probe of choice. Complementary results obtained with optical phase-conjugation experiments with he uncoated probes are discussed in relation to the probe...

  6. Modeling a Miniaturized Scanning Electron Microscope Focusing Column - Lessons Learned in Electron Optics Simulation

    Science.gov (United States)

    Loyd, Jody; Gregory, Don; Gaskin, Jessica

    2016-01-01

    This presentation discusses work done to assess the design of a focusing column in a miniaturized Scanning Electron Microscope (SEM) developed at the NASA Marshall Space Flight Center (MSFC) for use in-situ on the Moon-in particular for mineralogical analysis. The MSFC beam column design uses purely electrostatic fields for focusing, because of the severe constraints on mass and electrical power consumption imposed by the goals of lunar exploration and of spaceflight in general. The resolution of an SEM ultimately depends on the size of the focused spot of the scanning beam probe, for which the stated goal here is a diameter of 10 nanometers. Optical aberrations are the main challenge to this performance goal, because they blur the ideal geometrical optical image of the electron source, effectively widening the ideal spot size of the beam probe. In the present work the optical aberrations of the mini SEM focusing column were assessed using direct tracing of non-paraxial rays, as opposed to mathematical estimates of aberrations based on paraxial ray-traces. The geometrical ray-tracing employed here is completely analogous to ray-tracing as conventionally understood in the realm of photon optics, with the major difference being that in electron optics the lens is simply a smoothly varying electric field in vacuum, formed by precisely machined electrodes. Ray-tracing in this context, therefore, relies upon a model of the electrostatic field inside the focusing column to provide the mathematical description of the "lens" being traced. This work relied fundamentally on the boundary element method (BEM) for this electric field model. In carrying out this research the authors discovered that higher accuracy in the field model was essential if aberrations were to be reliably assessed using direct ray-tracing. This led to some work in testing alternative techniques for modeling the electrostatic field. Ultimately, the necessary accuracy was attained using a BEM

  7. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakaran, Ramprashad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rhodes, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schemer-Kohrn, Alan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guzman, Anthony D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-10-01

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  8. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakaran, Ramprashad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rhodes, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schemer-Kohrn, Alan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guzman, Anthony D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-30

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  9. Test field for airborne laser scanning in Finland

    Science.gov (United States)

    Ahokas, E.; Kaartinen, H.; Kukko, A.; Litkey, P.

    2014-11-01

    Airborne laser scanning (ALS) is a widely spread operational measurement tool for obtaining 3D coordinates of the ground surface. There is a need for calibrating the ALS system and a test field for ALS was established at the end of 2013. The test field is situated in the city of Lahti, about 100 km to the north of Helsinki. The size of the area is approximately 3.5 km × 3.2 km. Reference data was collected with a mobile laser scanning (MLS) system assembled on a car roof. Some streets were measured both ways and most of them in one driving direction only. The MLS system of the Finnish Geodetic Institute (FGI) consists of a navigation system (NovAtel SPAN GNSS-IMU) and a laser scanner (FARO Focus3D 120). In addition to the MLS measurements more than 800 reference points were measured using a Trimble R8 VRS-GNSS system. Reference points are along the streets, on parking lots, and white pedestrian crossing line corners which can be used as reference targets. The National Land Survey of Finland has already used this test field this spring for calibrating their Leica ALS-70 scanner. Especially it was easier to determine the encoder scale factor parameter using this test field. Accuracy analysis of the MLS points showed that the point height RMSE is 2.8 cm and standard deviation is 2.6 cm. Our purpose is to measure both more MLS data and more reference points in the test field area to get a better spatial coverage. Calibration flight heights are planned to be 1000 m and 2500 m above ground level. A cross pattern, southwest-northeast and northwest-southeast, will be flown both in opposite directions.

  10. Sub-wavelength imaging by depolarization in a reflection near-field optical microscope using an uncoated fiber probe

    DEFF Research Database (Denmark)

    Madsen, Steen; Bozhevolnyi, Sergey I.; Hvam, Jørn Märcher

    1998-01-01

    We present a reflection scanning near-field optical microscope utilizing counter-directional light propagation in an uncoated fiber probe, cross-polarized detection and shear-force feedback. Topographical and near-field optical imaging with a scanning speed of up to 10 mu m/s and a lateral...

  11. A dark-field scanning spectroscopy platform for localized scatter and fluorescence imaging of tissue

    Science.gov (United States)

    Krishnaswamy, Venkataramanan; Laughney, Ashley M.; Paulsen, Keith D.; Pogue, Brian W.

    2011-03-01

    Tissue ultra-structure and molecular composition provide native contrast mechanisms for discriminating across pathologically distinct tissue-types. Multi-modality optical probe designs combined with spatially confined sampling techniques have been shown to be sensitive to this type of contrast but their extension to imaging has only been realized recently. A modular scanning spectroscopy platform has been developed to allow imaging localized morphology and molecular contrast measures in breast cancer surgical specimens. A custom designed dark-field telecentric scanning spectroscopy system forms the core of this imaging platform. The system allows imaging localized elastic scatter and fluorescence measures over fields of up to 15 mm x 15 mm at 100 microns resolution in tissue. Results from intralipid and blood phantom measurements demonstrate the ability of the system to quantify localized scatter parameters despite significant changes in local absorption. A co-registered fluorescence spectroscopy mode is also demonstrated in a protophorphyrin-IX phantom.

  12. Accurate measurement of interferometer group delay using field-compensated scanning white light interferometer.

    Science.gov (United States)

    Wan, Xiaoke; Wang, Ji; Ge, Jian

    2010-10-10

    Interferometers are key elements in radial velocity (RV) experiments in astronomy observations, and accurate calibration of the group delay of an interferometer is required for high precision measurements. A novel field-compensated white light scanning Michelson interferometer is introduced as an interferometer calibration tool. The optical path difference (OPD) scanning was achieved by translating a compensation prism, such that even if the light source were in low spatial coherence, the interference stays spatially phase coherent over a large interferometer scanning range. In the wavelength region of 500-560 nm, a multimode fiber-coupled LED was used as the light source, and high optical efficiency was essential in elevating the signal-to-noise ratio of the interferogram signal. The achromatic OPD scanning required a one-time calibration, and two methods using dual-laser wavelength references and an iodine absorption spectrum reference were employed and cross-verified. In an experiment measuring the group delay of a fixed Michelson interferometer, Fourier analysis was employed to process the interferogram data. The group delay was determined at an accuracy of 1×10(-5), and the phase angle precision was typically 2.5×10(-6) over the wide wavelength region.

  13. Advanced electric-field scanning probe lithography on molecular resist using active cantilever

    Science.gov (United States)

    Kaestner, Marcus; Aydogan, Cemal; Lipowicz, Hubert-Seweryn; Ivanov, Tzvetan; Lenk, Steve; Ahmad, Ahmad; Angelov, Tihomir; Reum, Alexander; Ishchuk, Valentyn; Atanasov, Ivaylo; Krivoshapkina, Yana; Hofer, Manuel; Holz, Mathias; Rangelow, Ivo W.

    2015-03-01

    The routine "on demand" fabrication of features smaller than 10 nm opens up new possibilities for the realization of many novel nanoelectronic, NEMS, optical and bio-nanotechnology-based devices. Based on the thermally actuated, piezoresistive cantilever technology we have developed a first prototype of a scanning probe lithography (SPL) platform able to image, inspect, align and pattern features down to single digit nano regime. The direct, mask-less patterning of molecular resists using active scanning probes represents a promising path circumventing the problems in today's radiation-based lithography. Here, we present examples of practical applications of the previously published electric field based, current-controlled scanning probe lithography on molecular glass resist calixarene by using the developed tabletop SPL system. We demonstrate the application of a step-and-repeat scanning probe lithography scheme including optical as well as AFM based alignment and navigation. In addition, sequential read-write cycle patterning combining positive and negative tone lithography is shown. We are presenting patterning over larger areas (80 x 80 μm) and feature the practical applicability of the lithographic processes.

  14. Fault detection by surface seismic scanning tunneling macroscope: Field test

    KAUST Repository

    Hanafy, Sherif M.

    2014-08-05

    The seismic scanning tunneling macroscope (SSTM) is proposed for detecting the presence of near-surface impedance anomalies and faults. Results with synthetic data are consistent with theory in that scatterers closer to the surface provide brighter SSTM profiles than those that are deeper. The SSTM profiles show superresolution detection if the scatterers are in the near-field region of the recording line. The field data tests near Gulf of Aqaba, Haql, KSA clearly show the presence of the observable fault scarp, and identify the subsurface presence of the hidden faults indicated in the tomograms. Superresolution detection of the fault is achieved, even when the 35 Hz data are lowpass filtered to the 5-10 Hz band.

  15. Ultrafast random-access scanning in two-photon microscopy using acousto-optic deflectors.

    Science.gov (United States)

    Salomé, R; Kremer, Y; Dieudonné, S; Léger, J-F; Krichevsky, O; Wyart, C; Chatenay, D; Bourdieu, L

    2006-06-30

    Two-photon scanning microscopy (TPSM) is a powerful tool for imaging deep inside living tissues with sub-cellular resolution. The temporal resolution of TPSM is however strongly limited by the galvanometric mirrors used to steer the laser beam. Fast physiological events can therefore only be followed by scanning repeatedly a single line within the field of view. Because acousto-optic deflectors (AODs) are non-mechanical devices, they allow access at any point within the field of view on a microsecond time scale and are therefore excellent candidates to improve the temporal resolution of TPSM. However, the use of AOD-based scanners with femtosecond pulses raises several technical difficulties. In this paper, we describe an all-digital TPSM setup based on two crossed AODs. It includes in particular an acousto-optic modulator (AOM) placed at 45 degrees with respect to the AODs to pre-compensate for the large spatial distortions of femtosecond pulses occurring in the AODs, in order to optimize the spatial resolution and the fluorescence excitation. Our setup allows recording from freely selectable point-of-interest at high speed (1kHz). By maximizing the time spent on points of interest, random-access TPSM (RA-TPSM) constitutes a promising method for multiunit recordings with millisecond resolution in biological tissues.

  16. Far-field mapping of the longitudinal magnetic and electric optical fields

    CERN Document Server

    Ecoffey, C

    2013-01-01

    In this letter, we demonstrate the experimental mapping of the longitudinal magnetic and electric optical fields with a standard scanning microscope that involves a high numerical aperture far-field objective. The imaging concept relies upon the insertion of an azimuthal or a radial polarizer within the detection path of the microscope which acts as an optical electromagnetic filter aimed at transmitting selectively to the detector the signal from the magnetic or electric longitudinal fields present in the detection volume, respectively. The resulting system is thus versatile, non invasive, of high resolution, and shows high detection efficiencies. Magnetic optical properties of physical and biological micro and nano-structures may thus be revealed with a far-field microscope.

  17. Fabrication of narrow surface relief features in a side-chain azobenzene polyester with a scanning near-field microscope

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Holme, N. C. R.; Pedersen, M.

    2001-01-01

    We show that it is possible to fabricate topographic submicron features in a side-chain azobenzene polyester with a scanning near-field optical microscope, Through irradiation at a wavelength of 488 run at intensity levels of 12 W/cm(2), topographic features as narrow as 240 nm and as high as 6 n...

  18. Three-dimensional imaging of intracochlear tissue by scanning laser optical tomography (SLOT)

    Science.gov (United States)

    Tinne, N.; Nolte, L.; Antonopoulos, G. C.; Schulze, J.; Andrade, J.; Heisterkamp, A.; Meyer, H.; Warnecke, A.; Majdani, O.; Ripken, T.

    2016-02-01

    The presented study focuses on the application of scanning laser optical tomography (SLOT) for non-destructive visualization of anatomical structures inside the human cochlea ex vivo. SLOT is a laser-based highly efficient microscopy technique, which allows for tomographic imaging of the internal structure of transparent large-scale specimens (up to 1 cm3). Thus, in the field of otology this technique is best convenient for an ex vivo study of the inner ear anatomy. For this purpose, the preparation before imaging comprises mechanically assisted decalcification, dehydration as well as optical clearing of the cochlea samples. Here, we demonstrate results of SLOT visualizing hard and soft tissue structures of the human cochlea with an optical resolution in the micrometer range using absorption and autofluorescence as contrast mechanisms. Furthermore, we compare our results with the method of X-ray micro tomography (micro-CT, μCT) as clinical gold standard which is based only on absorption. In general, SLOT can provide the advantage of covering all contrast mechanisms known from other light microscopy techniques, such as fluorescence or scattering. For this reason, a protocol for antibody staining has been developed, which additionally enables selective mapping of cellular structures within the cochlea. Thus, we present results of SLOT imaging rodent cochleae showing specific anatomical structures such as hair cells and neurofilament via fluorescence. In conclusion, the presented study has shown that SLOT is an ideally suited tool in the field of otology for in toto visualization of the inner ear microstructure.

  19. Polarization resolved imaging with a reflection near-field optical microscope

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Xiao, Mufei; Hvam, Jørn Märcher

    1999-01-01

    Using a rigorous microscopic point-dipole description of probe-sample interactions, we study imaging with a reflection scanning near-field optical microscope. Optical content, topographical artifacts, sensitivity window-i.e., the scale on which near-field optical images represent mainly optical...... configuration is preferable to the cross-linear one, since it ensures more isotropic (in the surface plane) near-field imaging of surface features. The numerical results are supported with experimental near-field images obtained by using a reflection microscope with an uncoated fiber tip....

  20. Sensitivity calibration procedures in optical-CT scanning of BANG 3 polymer gel dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Y.; Wuu, Cheng-Shie; Maryanski, Marek J. [Department of Radiation Oncology, Columbia University, New York, New York 10032 (United States); Department of Radiation Oncology, Columbia University, New York, New York 10032 and MGS Research Inc., Madison, Connecticut 06443 (United States)

    2010-02-15

    The dose response of the BANG 3 polymer gel dosimeter (MGS Research Inc., Madison, CT) was studied using the OCTOPUS laser CT scanner (MGS Research Inc., Madison, CT). Six 17 cm diameter and 12 cm high Barex cylinders, and 18 small glass vials were used to house the gel. The gel phantoms were irradiated with 6 and 10 MV photons, as well as 12 and 16 MeV electrons using a Varian Clinac 2100EX. Three calibration methods were used to obtain the dose response curves: (a) Optical density measurements on the 18 glass vials irradiated with graded doses from 0 to 4 Gy using 6 or 10 MV large field irradiations; (b) optical-CT scanning of Barex cylinders irradiated with graded doses (0.5, 1, 1.5, and 2 Gy) from four adjacent 4x4 cm{sup 2} photon fields or 6x6 cm{sup 2} electron fields; and (c) percent depth dose (PDD) comparison of optical-CT scans with ion chamber measurements for 6x6 cm{sup 2}, 12 and 16 MeV electron fields. The dose response of the BANG 3 gel was found to be linear and energy independent within the uncertainties of the experimental methods (about 3%). The slopes of the linearly fitted dose response curves (dose sensitivities) from the four field irradiations (0.0752{+-}3%, 0.0756{+-}3%, 0.0767{+-}3%, and 0.0759{+-}3% cm{sup -1} Gy{sup -1}) and the PDD matching methods (0.0768{+-}3% and 0.0761{+-}3% cm{sup -1} Gy{sup -1}) agree within 2.2%, indicating a good reproducibility of the gel dose response within phantoms of the same geometry. The dose sensitivities from the glass vial approach are different from those of the cylindrical Barex phantoms by more than 30%, owing probably to the difference in temperature inside the two types of phantoms during gel formation and irradiation, and possible oxygen contamination of the glass vial walls. The dose response curve obtained from the PDD matching approach with 16 MeV electron field was used to calibrate the gel phantom irradiated with the 12 MeV, 6x6 cm{sup 2} electron field. Three-dimensional dose distributions

  1. Field approach in the transformation optics concept

    DEFF Research Database (Denmark)

    Novitsky, Andrey; Zhukovsky, Sergei; Barkovsky, L. M.

    2012-01-01

    is equivalent to the conventional coordinate-transformation approach but is preferable when looking for specific field distribution. A set of example devices such as invisibility cloaks, concentrators, rotators, and transformation optics lenses capable of creating light beams with predetermined field...

  2. Acousto-optic multiphoton laser scanning microscopy and multiphoton photon counting spectroscopy: Applications and implications for optical neurobiology

    Science.gov (United States)

    Iyer, Vijay

    Multiphoton excitation of molecular probes has become an important tool in experimental neurobiology owing to the intrinsic optical sectioning and low light scattering it affords. Using molecular functional indicators, multiphoton excitation allows physiological signals within single neurons to be observed from within living brain tissue. Ideally, it would be possible to record from multiple sites located throughout the elaborately branching dendritic arbors, in order to study the correlations of structure and function both within and across experiments. However, existing multiphoton microscope systems based on scanning mirrors do not allow optical recordings to be obtained from more than a handful of sites simultaneously at the high rates required to capture the fast physiological signals of interest (>100Hz for Ca2+ signals, >1kHz for membrane potential transients). In order to overcome this limitation, two-dimensional acousto-optic deflection was employed, to allow an ultrafast laser beam suited for multiphoton excitation to be rapidly repositioned with low latency (˜15mus). This supports a random-access scanning mode in which the beam can repeatedly visit a succession of user-selected sites of interest within the microscope's field-of-view at high rates, with minimal sacrifice of pixel dwell time. This technique of acousto-optic multiphoton laser scanning microscope (AO-MPLSM) was demonstrated to allow the spatial profile of signals arising in response to physiological stimulation to be rapidly mapped. Means to compensate or avoid problems of dispersion which have hampered AO-MPLSM in the past are presented, with the latter being implemented. Separately, the combination of photon counting detection with multiphoton excitation, termed generally multiphoton photon counting spectroscopy (MP-PCS), was also considered, with particular emphasis on the technique of fluorescence correlation spectroscopy (FCS). MP-PCS was shown to allow information about molecular

  3. Scanning Electron Microscopy with Samples in an Electric Field

    Science.gov (United States)

    Frank, Ludĕk; Hovorka, Miloš; Mikmeková, Šárka; Mikmeková, Eliška; Müllerová, Ilona; Pokorná, Zuzana

    2012-01-01

    The high negative bias of a sample in a scanning electron microscope constitutes the “cathode lens” with a strong electric field just above the sample surface. This mode offers a convenient tool for controlling the landing energy of electrons down to units or even fractions of electronvolts with only slight readjustments of the column. Moreover, the field accelerates and collimates the signal electrons to earthed detectors above and below the sample, thereby assuring high collection efficiency and high amplification of the image signal. One important feature is the ability to acquire the complete emission of the backscattered electrons, including those emitted at high angles with respect to the surface normal. The cathode lens aberrations are proportional to the landing energy of electrons so the spot size becomes nearly constant throughout the full energy scale. At low energies and with their complete angular distribution acquired, the backscattered electron images offer enhanced information about crystalline and electronic structures thanks to contrast mechanisms that are otherwise unavailable. Examples from various areas of materials science are presented.

  4. Special Features of Functioning of the Optical Channel of a Scanning Optical Microscope for Cryobiology and Cryomedicine

    OpenAIRE

    Lubinecka, Bogdana; Pedan, Anatoliy

    2010-01-01

    Is analyzed work of a scanning optical microscope, which magnification reaches initial values of electronic raster microscopes, at research of biological microobjects cryobiology and cryomedicine at a cellular level. Circuits of optical channels for working on showthrough and reflection, and also microscopic cryostate for deep cooling are offered on the basis of thermoelectric modules and thermal pipes.

  5. Modeling the Effect of Wave-front Aberrations in Fiber-based Scanning Optical Microscopy

    NARCIS (Netherlands)

    Verstraete, H.R.G.W.; Verhaegen, M.H.G.; Kalkman, J.

    2013-01-01

    In scanning microscopy and optical coherence tomography, aberrations of the wave-front cause a loss in intensity and resolution. Intensity and resolution are quantified using Fresnel propagation, Fraunhofer diffraction, and the calculation of overlap integrals.

  6. Performance analysis of a hybrid fingerprint extracted from optical coherence tomography fingertip scans

    CSIR Research Space (South Africa)

    Darlow, Luke N

    2016-06-01

    Full Text Available International Conference on Biometrics (ICB), 13-16 June 2016, Halmstad, Sweden Performance analysis of a hybrid fingerprint extracted from optical coherence tomography fingertip scans Darlow LN Connan J Singh A ABSTRACT: The Hybrid fingerprint is a...

  7. Optical Manipulation with Speckle Light Fields

    CERN Document Server

    Volpe, Giorgio; Gigan, Sylvain

    2014-01-01

    Optical tweezers have been widely applied to trap and manipulate micro- and nano-objects, such as cells, organelles and macromolecules. Generating well-controlled optical forces usually requires a highly focused laser beam, which means a careful engineering of the setups and the samples. Although similar conditions are routinely met in research laboratories, optical imperfections or scattering limit the applicability of this technique to real-life situations, such as in biomedical or microfluidic applications. Nonetheless, scattering of coherent light by disordered structures gives rise to speckles, random diffraction patterns with well-defined statistical properties. Here, we demonstrate how speckle fields can become a versatile tool to perform fundamental optical manipulation tasks such as trapping, guiding and sorting, exploiting the emergence of anomalous diffusion and drift in time-varying speckles. The simplicity and high-throughput of this technique greatly broadens the perspectives of optical manipula...

  8. Nonlinear optical switching and optical limiting in colloidal CdSe quantum dots investigated by nanosecond Z-scan measurement

    Science.gov (United States)

    Valligatla, Sreeramulu; Haldar, Krishna Kanta; Patra, Amitava; Desai, Narayana Rao

    2016-10-01

    The semiconductor nanocrystals are found to be promising class of third order nonlinear optical materials because of quantum confinement effects. Here, we highlight the nonlinear optical switching and optical limiting of cadmium selenide (CdSe) quantum dots (QDs) using nanosecond Z-scan measurement. The intensity dependent nonlinear absorption and nonlinear refraction of CdSe QDs were investigated by applying the Z-scan technique with 532 nm, nanosecond laser pulses. At lower intensities, the nonlinear process is dominated by saturable absorption (SA) and it is changed to reverse saturable absorption (RSA) at higher intensities. The SA behaviour is attributed to the ground state bleaching and the RSA is ascribed to free carrier absorption (FCA) of CdSe QDs. The nonlinear optical switching behaviour and reverse saturable absorption makes CdSe QDs are good candidate for all-optical device and optical limiting applications.

  9. Lateral Scanning Linnik Interferometry for Large Field of View and Fast Scanning: Wafer Bump Inspection

    Science.gov (United States)

    Kim, Min Y.; Veluvolu, Kalyana C.; Lee, Soon-Geul

    2011-07-01

    Wafer-level packaging is currently the major trend in semiconductor packaging for miniaturization and high-density integration. To ensure the package reliability, the wafer and substrate bumps utilized as connection junctions need to be in-line inspected as regards their top-height distribution, coplanarity, and volume uniformity. This article proposes a lateral scanning interferometric system for wafer bump shape inspection in three dimensions with a large field of view and fast inspection speed based on an optomechatronic system design. For multiple-peak interferogram from wafer bumps around a transparent film layer, two-step information extraction algorithms are suggested, including top surface profile and under-layer surface profile detection algorithms. The multiple-peak interferogram is acquired with variations of lateral position of the reference mirror by a piezoelectric transducer (PZT). A series of experiments is performed for representative wafer samples with solder and gold bumps, and the effectiveness of the proposed inspection system is verified from the test results.

  10. Magnetic field induced optical vortex beam rotation

    CERN Document Server

    Shi, Shuai; Zhou, Zhi-Yuan; Li, Yan; Zhang, Wei; Shi, Bao-Sen

    2015-01-01

    Light with orbital angular momentum (OAM) has drawn a great deal of attention for its important applications in the fields of precise optical measurements and high capacity optical communications. Here we adopt a method to study the rotation of a light beam, which is based on magnetic field induced circular birefringence in warm 87Rb atomic vapor. The dependence of the rotation angle to the intensity of the magnetic field makes it appropriate for weak magnetic field measurement. We derive a detail theoretical description that is in well agreement with the experimental observations. The experiment shows here provides a new method for precise measurement of magnetic field intensity and expands the application of OAM-carrying light.

  11. Near-Field to Far-Field Transformation Techniques with Spiral Scannings: A Comprehensive Review

    Directory of Open Access Journals (Sweden)

    Renato Cicchetti

    2014-01-01

    Full Text Available An overview of the near-field-far-field (NF-FF transformation techniques with innovative spiral scannings, useful to derive the radiation patterns of the antennas commonly employed in the modern wireless communication systems, is provided in this paper. The theoretical background and the development of a unified theory of the spiral scannings for quasi-spherical and nonspherical antennas are described, and an optimal sampling interpolation expansion to evaluate the probe response on a quite arbitrary rotational surface from a nonredundant number of its samples, collected along a proper spiral wrapping it, is presented. This unified theory can be applied to spirals wrapping the conventional scanning surfaces and makes it possible to accurately reconstruct the NF data required by the NF-FF transformation employing the corresponding classical scanning. A remarkable reduction of the measurement time is so achieved, due to the use of continuous and synchronized movements of the positioning systems and to the reduced number of needed NF measurements. Some numerical and experimental results relevant to the spherical spiral scanning case when dealing with quasi-planar and electrically long antennas are shown.

  12. Scanning probe and optical tweezer investigations of biomolecular interactions

    Energy Technology Data Exchange (ETDEWEB)

    Rigby-Singleton, Shellie

    2002-07-01

    A complex array of intermolecular forces controls the interactions between and within biological molecules. The desire to empirically explore the fundamental forces has led to the development of several biophysical techniques. Of these, the atomic force microscope (AFM) and the optical tweezers have been employed throughout this thesis to monitor the intermolecular forces involved in biomolecular interactions. The AFM is a well-established force sensing technique capable of measuring biomolecular interactions at a single molecule level. However, its versatility has not been extrapolated to the investigation of a drug-enzyme complex. The energy landscape for the force induced dissociation of the DHFR-methotrexate complex was studied. Revealing an energy barrier to dissociation located {approx}0.3 nm from the bound state. Unfortunately, the AFM has a limited range of accessible loading rates and in order to profile the complete energy landscape alternative force sensing instrumentation should be considered, for example the BFP and optical tweezers. Thus, this thesis outlines the development and construction an optical trap capable of measuring intermolecular forces between biomolecules at the single molecule level. To demonstrate the force sensing abilities of the optical set up, proof of principle measurements were performed which investigate the interactions between proteins and polymer surfaces subjected to varying degrees of argon plasma treatment. Complementary data was gained from measurements performed independently by the AFM. Changes in polymer resistance to proteins as a response to changes in polymer surface chemistry were detected utilising both AFM and optical tweezers measurements. Finally, the AFM and optical tweezers were employed as ultrasensitive biosensors. Single molecule investigations of the antibody-antigen interaction between the cardiac troponin I marker and its complementary antibody, reveals the impact therapeutic concentrations of heparin

  13. Large area full-field optical coherence tomography

    Science.gov (United States)

    Chang, Shoude; Sherif, Sherif; Flueraru, Costel

    2006-09-01

    Optical Coherence Tomography (OCT) is a fundamentally new type of optical imaging technology. OCT performs high resolution, cross-sectional tomographic imaging of the internal structure in materials and biological systems. The biomedical applications of the OCT imaging systems have been developed for diagnostics of ophthalmology, dermatology, dentistry and cardiology. Most of existing OCT systems use point-scanning based technology, however, the 3-axis scanning makes the system slow and cumbersome. A few OCT systems working directly on 2D full-field images were reported, however, they are designed to work in a relatively small area, around couple of hundred microns square. In this paper, we present a design and implementation of a full-field OCT imaging system for acquiring tomography and with a working area around 15mm by 15 mm. The problems rising from full-field OCT are addressed and analyzed. The algorithms to extract the tomography are proposed. Two applications of multilayer information retrieval and 3D object imaging using full-field OCT are described.

  14. Near-field optical thin microcavity theory

    Science.gov (United States)

    Wu, Jiu Hui; Hou, Jiejie

    2016-01-01

    The thin microcavity theory for near-field optics is proposed in this study. By applying the power flow theorem and the variable theorem,the bi-harmonic differential governing equation for electromagnetic field of a three-dimensional thin microcavity is derived for the first time. Then by using the Hankel transform, this governing equation is solved exactly and all the electromagnetic components inside and outside the microcavity can be obtained accurately. According to the above theory, the near-field optical diffraction from a subwavelength aperture embedded in a thin conducting film is investigated, and numerical computations are performed to illustrate the edge effect by an enhancement factor of 1.8 and the depolarization phenomenon of the near-field transmission in terms of the distance from the film surface. This thin microcavity theory is verified by the good agreement between our results and those in the previous literatures. The thin microcavity theory presented in the study should be useful in the possible applications of the thin microcavities in near-field optics and thin-film optics.

  15. Near-Field/Far-Field Transformation with Helicoidal Scanning from Irregularly Spaced Data

    Directory of Open Access Journals (Sweden)

    Francesco D'Agostino

    2010-01-01

    Full Text Available A fast and accurate technique for the compensation of the probe positioning errors in the near-field/far-field transformation with helicoidal scanning is proposed in this paper. It relies on a nonredundant sampling representation using a spherical modelling of the antenna under test and employs an iterative scheme to evaluate the near-field data at the points fixed by the helicoidal nonredundant representation from the acquired irregularly distributed ones. Once these helicoidal data have been recovered, those required by a classical cylindrical near-field/far-field transformation are efficiently determined by using an optimal sampling interpolation algorithm. Some numerical tests assessing the effectiveness of the proposed approach and its stability with respect to random errors affecting the near-field data are shown.

  16. Scanning tunneling microscope light emission: Effect of the strong dc field on junction plasmons

    Science.gov (United States)

    Kalathingal, Vijith; Dawson, Paul; Mitra, J.

    2016-07-01

    The observed energies of the localized surface plasmons (LSPs) excited at the tip-sample junction of a scanning tunneling microscope, as identified by spectral peaks in the light output, are very significantly redshifted with respect to calculations that use standard optical data for the tip and sample material, gold in this case. We argue that this anomaly depends on the extreme field in the sub-nm tunneling proximity of the tip and the sample, across which a dc bias (1-2 V) is applied. Finite element modeling analysis is presented of a gold nanosphere-plane (NS-P) combination in tunneling proximity and, crucially, in the presence of a high static electric field (˜109V /m ). It is argued that the strong dc field induces nonlinear corrections to the dielectric function of the gold via the effect of a large background polarizability through the nonlinear, χ(3 ) susceptibility contribution. When fed into the model system the modified optical data alters the LSP cavity modes of the NS-P system to indeed reveal a large redshift in energy compared to those of the virgin gold NS-P system. The net outcome may be regarded as equivalent to lowering the bulk plasmon energy, the physical interpretation being that the intense field of the tunneling environment leads to surface charge screening, effectively reducing the density of free electrons available to participate in the plasmon oscillations.

  17. Local electric field measurements by optical tweezers

    Directory of Open Access Journals (Sweden)

    G. Pesce

    2011-09-01

    Full Text Available We report a new technique to measure direction and amplitude of electric fields generated by microelectrodes embedded in polar liquid environment, as often used in microfluidic devices. The method is based on optical tweezers which act as sensitive force transducer while a trapped charged microsphere behaves as a probe. When an electric field is applied the particles moves from its equilibrium position and finishes in a new equilibrium position where electric and optical forces are balanced. A trapped bead is moved to explore the electric field in a wide region around the microelectrodes. In such way maps of electric fields with high spatial resolution can be reconstructed even for complex electrode geometries where numerical simulation approaches can fail. Experimental results are compared with calculations based on finite element analysis simulation.

  18. Internal fingerprint zone detection in optical coherence tomography fingertip scans

    CSIR Research Space (South Africa)

    Darlow, LN

    2015-04-01

    Full Text Available Optical coherence tomography (OCT) is a high-resolution imaging technology capable of capturing a three-dimensional (3-D) representation of fingertip skin. The papillary junction—a junction layer of skin containing the same topographical features...

  19. Extragalactic Fields Optimized for Adaptive Optics

    Science.gov (United States)

    2011-03-01

    DAVID MONETIO Received 2010 luly 19; accepted 2010 December 30; published 2011 March 1 ABSTRACT. In this article we present the coordinates of 67 55’ x...fields. In some cases adaptive optics observations undertaken in the fields given in this article would be orders of magnitude more efficient than...expectations of considerable pro- gress in this subject with the advent of 30 m class extremely large telescopes ( ELTs ). A basic problem with unde1taking

  20. Nonlinear optical properties of natural laccaic acid dye studied using Z-scan technique

    Science.gov (United States)

    Zongo, S.; Sanusi, K.; Britton, J.; Mthunzi, P.; Nyokong, T.; Maaza, M.; Sahraoui, B.

    2015-08-01

    We have investigated the nonlinear optical properties, including the optical limiting behaviour for five different concentrations of laccaic acid dye in solution and a thin film obtained through doping in poly (methyl methacrylate) (PMMA) polymer. The experiments were performed by using single beam Z-scan technique at 532 nm with 10 ns, 10 Hz Nd:YAG laser pulses excitation. From the open-aperture Z-scan data, we derived that the laccaic dye samples exhibit strong two photon absorption (2PA). The nonlinear refractive index was determined through the closed aperture Z-scan data. The estimated absorption coefficient β2, nonlinear refractive index n2 and second order hyperpolarizability γ were found to be of the order of 10-10 m/W, 10-9 esu and 10-32 esu, respectively. The Z-scan study reveals that the natural laccaic acid dye emerges as a promising material for third order nonlinear optical devices application.

  1. Fiber-optic nonlinear endomicroscopy with focus scanning by using shape memory alloy actuation

    Science.gov (United States)

    Wu, Yicong; Zhang, Yuying; Xi, Jiefeng; Li, Ming-Jun; Li, Xingde

    2010-01-01

    A miniature fiber optic endomicroscope with built-in dynamic focus scanning capability is developed for the first time for 3-D two-photon fluorescence (TPF) imaging of biological samples. Fast 2-D lateral beam scanning is realized by resonantly vibrating a double-clad fiber cantilever with a tubular piezoactuator. Slow axial scanning is achieved by moving the distal end of the imaging probe with an extremely compact electrically driven shape memory alloy (SMA). The 10-mm-long SMA allows 150-μm contractions with a driving voltage varying only from 50 to 100 mV. The response of the SMA contraction with the applied voltage is nonlinear, but repeatable and can be accurately calibrated. Depth-resolved imaging of acriflavine-stained biological tissues and unstained white paper with the endomicroscope is performed, and the results demonstrate the feasibility of 3-D nonlinear optical imaging with the SMA-based scanning fiber-optic endomicroscope. PMID:21198147

  2. Picosecond optical nonlinearities in symmetrical and unsymmetrical phthalocyanines studied using the Z-scan technique

    Indian Academy of Sciences (India)

    S Venugopal Rao; P T Anusha; L Giribabu; Surya P Tewari

    2010-11-01

    We present our experimental results on the picosecond nonlinear optical (NLO) studies of symmetrical and unsymmetrical phthalocyanines, examined using the Z-scan technique. Both the open-aperture and closed-aperture Z-scan curves for three samples were recorded and the nonlinear coefficients were extracted from the theoretical fits. The nonlinear absorption/refraction contribution from the solvent was also identified. The observed open aperture behaviour for these molecules is understood in terms of the absorption coefficients of these molecules near 800 nm and the peak intensities used. It is established that these phthalocyanines exhibit large optical nonlinearities and, hence, are suitable for optical limiting applications.

  3. Assessment of the Optic Disc Morphology Using Spectral-Domain Optical Coherence Tomography and Scanning Laser Ophthalmoscopy

    Directory of Open Access Journals (Sweden)

    Pilar Calvo

    2014-01-01

    Full Text Available Objective. To compare the equivalent optic nerve head (OHN parameters obtained with confocal scanning laser ophthalmoscopy (HRT3 and spectral-domain optical coherence tomography (OCT in healthy and glaucoma patients. Methods. One hundred and eighty-two consecutive healthy subjects and 156 patients with open-angle glaucoma were divided into 2 groups according to intraocular pressure and visual field outcomes. All participants underwent imaging of the ONH with the HRT3 and the Cirrus OCT. The ONH parameters and the receiver operating characteristic (ROC curves were compared between both groups. Results. Mean age did not differ between the normal and glaucoma groups (59.55 ± 9.7 years and 61.05 ± 9.4 years, resp.; P=0.15. Rim area, average cup-to-disc (C/D ratio, vertical C/D ratio, and cup volume were different between both instruments (P<0.001. All equivalent ONH parameters, except disc area, were different between both groups (P<0.001. The best areas under the ROC curve were observed for vertical C/D ratio (0.980 for OCT and 0.942 for HRT3; P=0.11. Sensitivities at 95% fixed-specificities of OCT parameters were higher than those of HRT3. Conclusions. Equivalent ONH parameters of Cirrus OCT and HRT3 are different and cannot be used interchangeably. ONH parameters measured with OCT yielded a slightly better diagnostic performance.

  4. Optical field enhancement effects in laser-assisted particle removal

    OpenAIRE

    Mosbacher, Mario; Münzer, Hans-Joachim; Zimmermann, Jörg; Solis Cespedes, Francisco Javier; Boneberg, Johannes; Leiderer, Paul

    2001-01-01

    We report on the role of local optical field enhancement in the neighbourhood of particles during dry laser cleaning (DLC) of silicon wafer surfaces. Samples covered with spherical colloidal particles (PS, SiO2) and arbitrarily shaped Al2O3 particles with diameters from 320 1700 nm were cleaned using laser pulses with durations from 150 fs to 6.5 ns and wavelengths ranging from 400 800 nm. Cleaned areas were investigated with scanning electron and atomic force microscopy. Holes in the substra...

  5. Structure-function relationships using spectral-domain optical coherence tomography: comparison with scanning laser polarimetry.

    Science.gov (United States)

    Aptel, Florent; Sayous, Romain; Fortoul, Vincent; Beccat, Sylvain; Denis, Philippe

    2010-12-01

    To evaluate and compare the regional relationships between visual field sensitivity and retinal nerve fiber layer (RNFL) thickness as measured by spectral-domain optical coherence tomography (OCT) and scanning laser polarimetry. Prospective cross-sectional study. One hundred and twenty eyes of 120 patients (40 with healthy eyes, 40 with suspected glaucoma, and 40 with glaucoma) were tested on Cirrus-OCT, GDx VCC, and standard automated perimetry. Raw data on RNFL thickness were extracted for 256 peripapillary sectors of 1.40625 degrees each for the OCT measurement ellipse and 64 peripapillary sectors of 5.625 degrees each for the GDx VCC measurement ellipse. Correlations between peripapillary RNFL thickness in 6 sectors and visual field sensitivity in the 6 corresponding areas were evaluated using linear and logarithmic regression analysis. Receiver operating curve areas were calculated for each instrument. With spectral-domain OCT, the correlations (r(2)) between RNFL thickness and visual field sensitivity ranged from 0.082 (nasal RNFL and corresponding visual field area, linear regression) to 0.726 (supratemporal RNFL and corresponding visual field area, logarithmic regression). By comparison, with GDx-VCC, the correlations ranged from 0.062 (temporal RNFL and corresponding visual field area, linear regression) to 0.362 (supratemporal RNFL and corresponding visual field area, logarithmic regression). In pairwise comparisons, these structure-function correlations were generally stronger with spectral-domain OCT than with GDx VCC and with logarithmic regression than with linear regression. The largest areas under the receiver operating curve were seen for OCT superior thickness (0.963 ± 0.022; P polarimetry, and was better expressed logarithmically than linearly. Measurements with these 2 instruments should not be considered to be interchangeable. Copyright © 2010 Elsevier Inc. All rights reserved.

  6. Design of a Compact, Bimorph Deformable Mirror-Based Adaptive Optics Scanning Laser Ophthalmoscope.

    Science.gov (United States)

    He, Yi; Deng, Guohua; Wei, Ling; Li, Xiqi; Yang, Jinsheng; Shi, Guohua; Zhang, Yudong

    2016-01-01

    We have designed, constructed and tested an adaptive optics scanning laser ophthalmoscope (AOSLO) using a bimorph mirror. The simulated AOSLO system achieves diffraction-limited criterion through all the raster scanning fields (6.4 mm pupil, 3° × 3° on pupil). The bimorph mirror-based AOSLO corrected ocular aberrations in model eyes to less than 0.1 μm RMS wavefront error with a closed-loop bandwidth of a few Hz. Facilitated with a bimorph mirror at a stroke of ±15 μm with 35 elements and an aperture of 20 mm, the new AOSLO system has a size only half that of the first-generation AOSLO system. The significant increase in stroke allows for large ocular aberrations such as defocus in the range of ±600° and astigmatism in the range of ±200°, thereby fully exploiting the AO correcting capabilities for diseased human eyes in the future.

  7. Collimating slicer for optical integral field spectroscopy

    Science.gov (United States)

    Laurent, Florence; Hénault, François

    2016-07-01

    Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element of a given field. It is a powerful tool which rearranges the data cube represented by two spatial dimensions defining the field and the spectral decomposition (x, y, λ) in a detector plane. In IFS, the "spatial" unit reorganizes the field, the "spectral" unit is being composed of a classical spectrograph. For the spatial unit, three main techniques - microlens array, microlens array associated with fibres and image slicer - are used in astronomical instrumentations. The development of a Collimating Slicer is to propose a new type of optical integral field spectroscopy which should be more compact. The main idea is to combine the image slicer with the collimator of the spectrograph mixing the "spatial" and "spectral" units. The traditional combination of slicer, pupil and slit elements and spectrograph collimator is replaced by a new one composed of a slicer and spectrograph collimator only. After testing few configurations, this new system looks very promising for low resolution spectrographs. In this paper, the state of art of integral field spectroscopy using image slicers will be described. The new system based onto the development of a Collimating Slicer for optical integral field spectroscopy will be depicted. First system analysis results and future improvements will be discussed.

  8. Video Scanning Hartmann Optical Tester (VSHOT) Uncertainty Analysis: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Lewandowski, A.; Gray, A.

    2010-10-01

    This purely analytical work is based primarily on the geometric optics of the system and shows sensitivities to various design and operational parameters. We discuss sources of error with measuring devices, instrument calibrations, and operator measurements for a parabolic trough test. In this paper, we include both the random (precision) and systematic (bias) errors for VSHOT testing and their contributions to the uncertainty. The contributing factors that we considered in this study are target tilt, target face to laser output distance, instrument vertical offset, scanner tilt, distance between the tool and the test piece, camera calibration, and scanner/calibration.

  9. Three-dimensional optical transfer functions in the aberration-corrected scanning transmission electron microscope.

    Science.gov (United States)

    Jones, L; Nellist, P D

    2014-05-01

    In the scanning transmission electron microscope, hardware aberration correctors can now correct for the positive spherical aberration of round electron lenses. These correctors make use of nonround optics such as hexapoles or octupoles, leading to the limiting aberrations often being of a nonround type. Here we explore the effect of a number of potential limiting aberrations on the imaging performance of the scanning transmission electron microscope through their resulting optical transfer functions. In particular, the response of the optical transfer function to changes in defocus are examined, given that this is the final aberration to be tuned just before image acquisition. The resulting three-dimensional optical transfer functions also allow an assessment of the performance of a system for focal-series experiments or optical sectioning applications. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.

  10. Near-field microscopy with a scanning nitrogen-vacancy color center in a diamond nanocrystal: A brief review

    CERN Document Server

    Drezet, A; Cuche, A; Mollet, O; Berthel, M; Huant, S

    2015-01-01

    We review our recent developments of near-field scanning optical microscopy (NSOM) that uses an active tip made of a single fluorescent nanodiamond (ND) grafted onto the apex of a substrate fiber tip. The ND hosting a limited number of nitrogen-vacancy (NV) color centers, such a tip is a scanning quantum source of light. The method for preparing the ND-based tips and their basic properties are summarized. Then we discuss theoretically the concept of spatial resolution that is achievable in this special NSOM configuration and find it to be only limited by the scan height over the imaged system, in contrast with the standard aperture-tip NSOM whose resolution depends critically on both the scan height and aperture diameter. Finally, we describe a scheme we have introduced recently for high-resolution imaging of nanoplasmonic structures with ND-based tips that is capable of approaching the ultimate resolution anticipated by theory.

  11. Investigation of Two-Dimensional Transition Metal Dichalcogenides by Optical and Scanning Tunneling Spectroscopy

    Science.gov (United States)

    Rigosi, Albert F.

    The goal of this dissertation is not only to present works completed and projects initiated and accomplished, but to also attempt to teach some of the material to readers who have limited exposure to condensed matter. I will offer an introduction to two-dimensional transition metal dichalcogenide materials (2D TMDCs) and the mathematics required to understand the research conducted. Some effort will be given on explaining the experimental setups and preparations. Projects that required elaborate sample fabrication and the yielded results will be summarized. These results have heavy implications for the science behind bound electron-hole pairs, the effects of magnetic fields on such pairs, and extracting the useful optical properties from the material systems in which these pairs reside. Specialized fabrication techniques of samples for longer term projects that I led will also be presented, namely those of constructing heterostructures by stacking various 2D TMDCs for exploring the modulated properties of these novel arrangements. The latter portion of this dissertation will cover the nanoscopic dynamics of TMDC heterostructures. The Kramers-Kronig relations will be derived and discussed in detail. Data and results regarding the electronic structure of these materials, their heterostructures, and their custom alloys measured via scanning tunneling microscopy will be presented. Coupled with the measured optical properties, significant numerical quantities that characterize these materials are extracted. There will be several appendices that offer some supplementary information and basic summaries about all the projects that were initiated.

  12. Two-axis water-immersible microscanning mirror for scanning optics and acoustic microscopy

    Science.gov (United States)

    Xu, Song; Zou, Jun

    2016-10-01

    Fast multiaxis scanning is useful for not only optical but also acoustic microscopic imaging. Although they have been used for optical scanning, the application of (MEMS) scanning mirrors in acoustic microscopy is still very limited due to their small mirror plate size, and more importantly, inability to operate in liquids (as ultrasound coupling media). A microfabricated two-axis water-immersible scanning mirror for optical and acoustic microscopy is reported. It has an optical and acoustically reflective mirror plate (6 mm×4 mm) to provide numerical aperture for ultrasound beam steering. Electromagnetic and mechanical analysis and simulation were conducted to estimate the mechanical tilting angle and resonance frequency of both fast and slow axes, which matches well with the measurement results. The fast axis has a resonant frequency of 320 Hz in air and 220 Hz in water, which is more than 10 times higher than that of the slow axis (24 Hz in air and 14 Hz in water). Under a 100-mA driving current, the scanning angles of the fast axis reached ±9.5 deg in both air and water at the resonance frequency, respectively. The scanning angles of the slow axis reached ±15 deg in air and ±12.5 deg in water at resonant frequencies, respectively. Raster scanning of a collimated laser beam was achieved by driving both axes simultaneously close to their own resonance frequencies. The feasibility of using the two-axis water-immersible scanning mirror in scanning acoustic microscopy was also demonstrated.

  13. Scanning laser topography and scanning laser polarimetry: comparing both imaging methods at same distances from the optic nerve head.

    Science.gov (United States)

    Kremmer, Stephan; Keienburg, Marcus; Anastassiou, Gerasimos; Schallenberg, Maurice; Steuhl, Klaus-Peter; Selbach, J Michael

    2012-01-01

    To compare the performance of scanning laser topography (SLT) and scanning laser polarimetry (SLP) on the rim of the optic nerve head and its surrounding area and thereby to evaluate whether these imaging technologies are influenced by other factors beyond the thickness of the retinal nerve fiber layer (RNFL). A total of 154 eyes from 5 different groups were examined: young healthy subjects (YNorm), old healthy subjects (ONorm), patients with normal tension glaucoma (NTG), patients with open-angle glaucoma and early glaucomatous damage (OAGE) and patients with open-angle glaucoma and advanced glaucomatous damage (OAGA). SLT and SLP measurements were taken. Four concentric circles were superimposed on each of the images: the first one measuring at the rim of the optic nerve head (1.0 ONHD), the next measuring at 1.25 optic nerve head diameters (ONHD), at 1.5 ONHD and at 1.75 ONHD. The aligned images were analyzed using GDx/NFA software. Both methods showed peaks of RNFL thickness in the superior and inferior segments of the ONH. The maximum thickness, registered by the SLT device was at the ONH rim where the SLP device tended to measure the lowest values. SLT measurements at the ONH were influenced by other tissues besides the RNFL like blood vessels and glial tissues. SLT and SLP were most strongly correlated at distances of 1.25 and 1.5 ONHD. While both imaging technologies are valuable tools in detecting glaucoma, measurements at the ONH rim should be interpreted critically since both methods might provide misleading results. For the assessment of the retinal nerve fiber layer we would like to recommend for both imaging technologies, SLT and SLP, measurements in 1.25 and 1.5 ONHD distance of the rim of the optic nerve head.

  14. Full-field optical coherence tomography apply in sphere measurements

    Science.gov (United States)

    Shi, Wei; Li, Weiwei; li, Juncheng; Wang, Jingyu; Wang, Jianguo

    2016-10-01

    The geometry of a spherical surface, for example that of a precision optic, is completely determined by the radius -of-curvature at one point and the deviation from the perfect spherical form at all other points of the sphere. Full-field Optical Coherence Tomography (FF-OCT) is a parallel detection OCT technique that utilizes a 2D detector array. This technique avoids mechanical scanning in imaging optics, thereby speeding up the imaging process and enhancing the quality of images. The current paper presents an FF-OCT instrument that is designed to be used in sphere measurement with the principle of multiple delays (MD) OCT to evaluate the curvature and radius of curved objects in single-shot imaging. The optimum combination of the MD principle with the FF-OCT method was evaluated, and the radius of a metal ball was measured with this method. The generated 2n-1 contour lines were obtained by using an MDE with n delays in a single en-face OCT image. This method of measurement, it engaged in the measurement accuracy of spherical and enriches the means of measurement, to make a spherical scan techniques flexible application.

  15. Strong near-field optical localization on an array of gold nanodisks

    OpenAIRE

    Aigouy, Lionel; Prieto Vizán, Patricia; Vitrey, Alan; Anguita, José Virgilio; Cebollada, Alfonso; González Sagardoy, María Ujué

    2011-01-01

    By scanning near-field optical microscopy, we measured the localization of the electromagnetic field on an array of gold nanodisks illuminated in a transmission mode. We experimentally observed that the field is localized between the disks, with a pattern oriented along the incident polarization direction. We also observed that the electromagnetic field rapidly decays above the nanodisks, showing a strong vertical localization. The experimental results are in good agreement with numerical sim...

  16. Near-field optical microscopy with an infra-red free electron laser applied to cancer diagnosis

    Science.gov (United States)

    Smith, A. D.; Siggel-King, M. R. F.; Holder, G. M.; Cricenti, A.; Luce, M.; Harrison, P.; Martin, D. S.; Surman, M.; Craig, T.; Barrett, S. D.; Wolski, A.; Dunning, D. J.; Thompson, N. R.; Saveliev, Y.; Pritchard, D. M.; Varro, A.; Chattopadhyay, S.; Weightman, P.

    2013-02-01

    We show that the combination of a scanning near field optical microscope and an infra-red free electron laser yields chemical images with sub-cellular spatial resolution that have the potential to provide a diagnostic for oesophageal adenocarcinoma.

  17. Physical optics in a uniform gravitational field

    Science.gov (United States)

    Hacyan, Shahen

    2012-01-01

    The motion of a (quasi-)plane wave in a uniform gravitational field is studied. It is shown that the energy of an elliptically polarized wave does not propagate along a geodesic, but in a direction that is rotated with respect to the gravitational force. The similarity with the walk-off effect in anisotropic crystals or the optical Magnus effect in inhomogeneous media is pointed out.

  18. Diagnostic capability of scanning laser polarimetry with and without enhanced corneal compensation and optical coherence tomography.

    Science.gov (United States)

    Benítez-del-Castillo, Javier; Martinez, Antonio; Regi, Teresa

    2011-01-01

    To compare the abilities of the current commercially available versions of scanning laser polarimetry (SLP) and optical coherence tomography (OCT), SLP-variable corneal compensation (VCC), SLP-enhanced corneal compensation (ECC), and high-definition (HD) OCT, in discriminating between healthy eyes and those with early-to-moderate glaucomatous visual field loss. Healthy volunteers and patients with glaucoma who met the eligibility criteria were consecutively enrolled in this prospective, cross-sectional, observational study. Subjects underwent complete eye examination, automated perimetry, SLP-ECC, SLP-VCC, and HD-OCT. Scanning laser polarimetry parameters were recalculated in 90-degree segments (quadrants) in the calculation circle to be compared. Areas under the receiver operating characteristic curve (AUROCs) were calculated for every parameter in order to compare the ability of each imaging modality to differentiate between normal and glaucomatous eyes. Fifty-five normal volunteers (mean age 59.1 years) and 33 patients with glaucoma (mean age 63.8 years) were enrolled. Average visual field mean deviation was -6.69 dB (95% confidence interval -8.07 to -5.31) in the glaucoma group. The largest AUROCs were associated with nerve fiber indicator (0.880 and 0.888) for the SLP-VCC and SLP-ECC, respectively, and with the average thickness in the HD-OCT (0.897). The best performing indices for the SLP-VCC, SLP-ECC, and HD OCT gave similar AUROCs, showing moderate diagnostic accuracy in patients with early to moderate glaucoma. Further studies are needed to evaluate the ability of these technologies to discriminate between normal and glaucomatous eyes.

  19. Toward endoscopes with no distal optics: video-rate scanning microscopy through a fiber bundle.

    Science.gov (United States)

    Andresen, Esben Ravn; Bouwmans, Géraud; Monneret, Serge; Rigneault, Hervé

    2013-03-01

    We report a step toward scanning endomicroscopy without distal optics. The focusing of the beam at the distal end of a fiber bundle is achieved by imposing a parabolic phase profile across the exit face with the aid of a spatial light modulator. We achieve video-rate images by galvanometric scanning of the phase tilt at the proximal end. The approach is made possible by the bundle, designed to have very low coupling between cores.

  20. Optical properties of barcode symbols for laser scanning

    Science.gov (United States)

    Quinn, Anna M.; Eastman, Jay M.

    1991-02-01

    Not all bar code symbols are alike. This paper will discuss the characteristics of bar code symbols which can make or break a bar code laser scanner''s performance in a specific application. These characteristics can be broken down into three catergories: Substrates " inks" ( inks toners dyes etc. ) and the light source used to read the symbol. The characteristics of the substrate can be further separated into three groups: the medium used the scattering properties of the the medium and overlaminates. Intrinsic properties of the medium can include " paper noise" resulting from the grain of paper metal grain or a retro-reflective background. Scattering characteristics cover angular distribution of the scattered light absolute scatter levels from the substrate internal scatter and specularly reflected light. Overlaminates contribute their own assets and liabilities in successfully choosing a scanner that will perform for all your needs. The inks used and the light source utilized work in conjunction with each other in determining the performance of a laser scanner. The spectral characteristics and composition of the ink determine which light source the scanner must employ to be used to successfully interpret the symbol. The three common light sources available in laser bar code scanners are helium-neon lasers visible laser diodes and infra-red laser diodes. Experimental data will be presented illustrating the optical properties discussedIbove.

  1. Addressable, large-field second harmonic generation microscopy based on 2D acousto-optical deflector and spatial light modulator.

    Science.gov (United States)

    Shao, Yonghong; Liu, Honghai; Qin, Wan; Qu, Junle; Peng, Xiang; Niu, Hanben; Gao, Bruce Z

    2012-09-01

    We present an addressable, large-field second harmonic generation microscope by combining a 2D acousto-optical deflector with a spatial light modulator. The SLM shapes an incoming mode-locked, near-infrared Ti:Sapphire laser beam into a multifocus array, which can be rapidly scanned by changing the incident angle of the laser beam using a 2D acousto-optical deflector. Compared to the single-beam-scan technique, the multifocus array scan can increase the scanning rate and the field-of-view size with the multi-region imaging ability.

  2. Z-scan: A simple technique for determination of third-order optical nonlinearity

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Vijender, E-mail: chahal-gju@rediffmail.com [Department of Applied Science, N.C. College of Engineering, Israna, Panipat-132107, Haryana (India); Aghamkar, Praveen, E-mail: p-aghamkar@yahoo.co.in [Department of Physics, Chaudhary Devi Lal University, Sirsa-125055, Haryana (India)

    2015-08-28

    Z-scan is a simple experimental technique to measure intensity dependent nonlinear susceptibilities of third-order nonlinear optical materials. This technique is used to measure the sign and magnitude of both real and imaginary part of the third order nonlinear susceptibility (χ{sup (3)}) of nonlinear optical materials. In this paper, we investigate third-order nonlinear optical properties of Ag-polymer composite film by using single beam z-scan technique with Q-switched, frequency doubled Nd: YAG laser (λ=532 nm) at 5 ns pulse. The values of nonlinear absorption coefficient (β), nonlinear refractive index (n{sub 2}) and third-order nonlinear optical susceptibility (χ{sup (3)}) of permethylazine were found to be 9.64 × 10{sup −7} cm/W, 8.55 × 10{sup −12} cm{sup 2}/W and 5.48 × 10{sup −10} esu, respectively.

  3. Multibeam scanning optics with single laser source for full-color printers.

    Science.gov (United States)

    Maruo, S; Arimoto, A; Kobayashi, S

    1997-10-01

    In the novel optical system described here, four-color toners can be developed in one rotation of the photoconductor, and the color control information is given when the intensities of the laser power levels are changed and the two polarization directions are switched. A polarizing beam splitter between the common scanning optics and the photoconductor enables the laser beam to pass through a common scanning system and to illuminate two positions on the photoconductive material. The laser beam polarization direction is controlled by an electro-optical device immediately behind the laser. In each illuminated position, two-color toners are developed by a three-level (trilevel) photographic process. This simplified optical system eliminates the registration errors that occur with four-color information items and can be useful in high-speed printing systems.

  4. Design, fabrication, and control of scanning plasmonic probe for near-field photolithographic applications

    Science.gov (United States)

    Huang, Yu-Yen; Wang, Yuyan; Hoshino, Kazunori; Giese, David; Shrestha, Yujan; Zhang, Xiaojing

    2010-02-01

    We report the design, fabrication and operation of a scanning plasmonic probe compatible with a fully customized Near-field Scanning Microscope system. The probe is a silicon cantilever with a hollow pyramidal probe tip. A silicon dioxide layer was thermally grown to form the probe. A 100 nm thick aluminum layer was then e-beam evaporated onto the released probe tip to form the metal-dielectric interface for surface plasmonic wave propagation. A 500 nm diameter aperture was subsequently milled with the Focus Ion Beam. The probe was controlled with a built-in scanning controller for the probe-sample distance using a force sensing tuning fork. A tapered optical fiber, connected to 405 nm wavelength laser source, was aligned to the backside of the probe tip to serve as the light source. The transmitted light through the aperture was used to expose the photoresist (AZ 5209E), on a piece of cover glass attached on the tuning fork. The probe was controlled for near-field photolithography, where a series of 15 exposures, varied from 0 to 8 minutes, were carried out on the photoresist stepwise at 6.5 μm separation with subsequent 60 seconds development time. The transmitted light beam spot was simulated with a Full Width Half Maximum of 227 nm. Atomic Force Microscope measurement showed a 200 nm lateral resolution for the photolithography. The depths and widths of the developed patterns were linearly correlated with increasing exposure time, showing slopes of 0.76 nm/second and 1.4 nm/second respectively.

  5. Measurement of Temperature Change in Nonlinear Optical Materials by Using the Z-Scan Technique

    Institute of Scientific and Technical Information of China (English)

    DONG Shu-Guang; YANG Jun-Yi; SHUI Min; YI Chuan-Xiang; LI Zhong-Guo; SONG Ying-Lin

    2011-01-01

    @@ Spatial and temporal changes of temperature in a novel polymer are investigated by using the Z-scan technique under ns laser pulse excitation.According to the open aperture Z-scan experimental results, the nonlinear absorption coefficient of the polymer is determined.By solving the diffusion equation of heat conduction induced by optical absorption, the spatial and temporal changes in temperature are obtained.This change in temperature drives the photo-acoustic and electromagnetic wave propagating in the polymer and induces the change in refractive index, which serves as a negative lens, and the closed aperture Z-scan shows a peak and valley profile.Based on the numerical calculation, we achieve a good fit to the closed-aperture Z-scan curve with an optimized nonlinear refractive index.This consistency attests the existence of temperature change in the solution, and the Z-scan technique is suitable to investigate this change in temperature.

  6. Scanning instrumentation for measuring magnetic field trapping in high Tc superconductors

    Science.gov (United States)

    Sisk, R. C.; Helton, A. J.

    1993-01-01

    Computerized scanning instrumentation measures and displays trapped magnetic fields across the surface of high Tc superconductors at 77 K. Data are acquired in the form of a raster scan image utilizing stepping motor stages for positioning and a cryogenic Hall probe for magnetic field readout. Flat areas up to 45 mm in diameter are scanned with 0.5-mm resolution and displayed as false color images.

  7. Characterization of rock thermal conductivity by high-resolution optical scanning

    Science.gov (United States)

    Popov, Y.A.; Pribnow, D.F.C.; Sass, J.H.; Williams, C.F.; Burkhardt, H.

    1999-01-01

    We compared thress laboratory methods for thermal conductivity measurements: divided-bar, line-source and optical scanning. These methods are widely used in geothermal and petrophysical studies, particularly as applied to research on cores from deep scientific boreholes. The relatively new optical scanning method has recently been perfected and applied to geophysical problems. A comparison among these methods for determining the thermal conductivity tensor for anisotropic rocks is based on a representative collection of 80 crystalline rock samples from the KTB continental deep borehole (Germany). Despite substantial thermal inhomogeneity of rock thermal conductivity (up to 40-50% variation) and high anisotropy (with ratios of principal values attaining 2 and more), the results of measurements agree very well among the different methods. The discrepancy for measurements along the foliation is negligible (conductivity normal to the foliation reveals somewhat larger differences (3-4%). Optical scanning allowed us to characterize the thermal inhomogeneity of rocks and to identify a three-dimensional anisotropy in thermal conductivity of some gneiss samples. The merits of optical scanning include minor random errors (1.6%), the ability to record the variation of thermal conductivity along the sample, the ability to sample deeply using a slow scanning rate, freedom from constraints for sample size and shape, and quality of mechanical treatment of the sample surface, a contactless mode of measurement, high speed of operation, and the ability to measure on a cylindrical sample surface. More traditional methods remain superior for characterizing bulk conductivity at elevated temperature.Three laboratory methods including divided-bar, line-source and optical scanning are widely applied in geothermal and petrophysical studies. In this study, these three methods were compared for determining the thermal conductivity tensor for anisotropic rocks. For this study, a

  8. Design and verification of the miniature optical system for small object surface profile fast scanning

    Science.gov (United States)

    Chi, Sheng; Lee, Shu-Sheng; Huang, Jen, Jen-Yu; Lai, Ti-Yu; Jan, Chia-Ming; Hu, Po-Chi

    2016-04-01

    As the progress of optical technologies, different commercial 3D surface contour scanners are on the market nowadays. Most of them are used for reconstructing the surface profile of mold or mechanical objects which are larger than 50 mm×50 mm× 50 mm, and the scanning system size is about 300 mm×300 mm×100 mm. There are seldom optical systems commercialized for surface profile fast scanning for small object size less than 10 mm×10 mm×10 mm. Therefore, a miniature optical system has been designed and developed in this research work for this purpose. Since the most used scanning method of such system is line scan technology, we have developed pseudo-phase shifting digital projection technology by adopting projecting fringes and phase reconstruction method. A projector was used to project a digital fringe patterns on the object, and the fringes intensity images of the reference plane and of the sample object were recorded by a CMOS camera. The phase difference between the plane and object can be calculated from the fringes images, and the surface profile of the object was reconstructed by using the phase differences. The traditional phase shifting method was accomplished by using PZT actuator or precisely controlled motor to adjust the light source or grating and this is one of the limitations for high speed scanning. Compared with the traditional optical setup, we utilized a micro projector to project the digital fringe patterns on the sample. This diminished the phase shifting processing time and the controlled phase differences between the shifted phases become more precise. Besides, the optical path design based on a portable device scanning system was used to minimize the size and reduce the number of the system components. A screwdriver section about 7mm×5mm×5mm has been scanned and its surface profile was successfully restored. The experimental results showed that the measurement area of our system can be smaller than 10mm×10mm, the precision reached to

  9. Quantitative Imaging of Microwave Electric Fields through Near-Field Scanning Microwave Microscopy

    Science.gov (United States)

    Dutta, S. K.; Vlahacos, C. P.; Steinhauer, D. E.; Thanawalla, A.; Feenstra, B. J.; Wellstood, F. C.; Anlage, Steven M.; Newman, H. S.

    1998-03-01

    The ability to non-destructively image electric field patterns generated by operating microwave devices (e.g. filters, antennas, circulators, etc.) would greatly aid in the design and testing of these structures. Such detailed information can be used to reconcile discrepancies between simulated behavior and experimental data (such as scattering parameters). The near-field scanning microwave microscope we present uses a coaxial probe to provide a simple, broadband method of imaging electric fields.(S. M. Anlage, et al.) IEEE Trans. Appl. Supercond. 7, 3686 (1997).^,(See http://www.csr.umd.edu/research/hifreq/micr_microscopy.html) The signal that is measured is related to the incident electric flux normal to the face of the center conductor of the probe, allowing different components of the field to be measured by orienting the probe appropriately. By using a simple model of the system, we can also convert raw data to absolute electric field. Detailed images of standing waves on copper microstrip will be shown and compared to theory.

  10. Scanning laser polarimetry reveals status of RNFL integrity in eyes with optic nerve head swelling by OCT.

    Science.gov (United States)

    Kupersmith, Mark J; Kardon, Randy; Durbin, Mary; Horne, Melissa; Shulman, Julia

    2012-04-18

    Optical coherence tomography (OCT) shows retinal nerve fiber layer (RNFL) thickening in optic nerve head (ONH) swelling, but does not provide information on acute axonal disruption. It was hypothesized that scanning laser polarimetry (SLP) compared with OCT might reveal the status of axon integrity and visual prognosis in acute RNFL swelling. Threshold perimetry, OCT, and SLP were used to prospectively study eyes with papilledema (24), optic neuritis (14), nonarteritic anterior ischemic optic neuropathy (NAION) (21), and ONH swelling (average RNFL value by OCT was above the 95th percentile of controls at presentation). Regional RNFL was judged reduced if the quadrant measurement was below the fifth percentile of controls. At presentation, average RNFL by OCT was similar for eyes with papilledema and NAION (P = 0.97), and reduced for optic neuritis. Average RNFL by SLP was slightly increased for papilledema and optic neuritis, and reduced for NAION (P = 0.02) eyes. The RNFL by SLP was reduced in at least one quadrant in 1 eye with papilledema, 1 eye with optic neuritis, and in 13 eyes with NAION. In NAION eyes, quadrants with reduced SLP had corresponding visual field loss that did not recover. By one month, eyes with NAION showed RNFL thinning by OCT (7/17 eyes) and by SLP (14/16 eyes) in contrast to optic neuritis (by OCT, 0/12, P = 0.006; and by SLP, 1/12, P = 0.0004). OCT and SLP revealed different aspects of RNFL changes associated with ONH swelling. OCT revealed thickening due to edema. SLP revealed a decrease in retardance in eyes with axonal injury associated with visual field loss, which is unlikely to recover.

  11. Z-scan studies of the nonlinear optical properties of gold nanoparticles prepared by electron beam deposition.

    Science.gov (United States)

    Mezher, M H; Nady, A; Penny, R; Chong, W Y; Zakaria, R

    2015-11-20

    This paper details the fabrication process for placing single-layer gold (Au) nanoparticles on a planar substrate, and investigation of the resulting optical properties that can be exploited for nonlinear optics applications. Preparation of Au nanoparticles on the substrate involved electron beam deposition and subsequent thermal dewetting. The obtained thin films of Au had a variation in thicknesses related to the controllable deposition time during the electron beam deposition process. These samples were then subjected to thermal annealing at 600°C to produce a randomly distributed layer of Au nanoparticles. Observation from field-effect scanning electron microscope (FESEM) images indicated the size of Au nanoparticles ranges from ∼13 to ∼48  nm. Details of the optical properties related to peak absorption of localized surface plasmon resonance (LSPR) of the nanoparticle were revealed by use of UV-Vis spectroscopy. The Z-scan technique was used to measure the nonlinear effects on the fabricated Au nanoparticle layers where it strongly relates LSPR and nonlinear optical properties.

  12. Implant planning and placement using optical scanning and cone beam CT technology

    NARCIS (Netherlands)

    J.M. van der Zel

    2008-01-01

    There is a growing interest in minimally invasive implant therapy as a standard prosthodontic treatment, providing complete restoration of occlusal function. A new treatment method (CADDIMA), which combines both computerized tomographic (CT) and optical laser-scan data for planning and design of sur

  13. The study of lossy compressive method with different interpolation for holographic reconstruction in optical scanning holography

    Directory of Open Access Journals (Sweden)

    HU Zhijuan

    2015-08-01

    Full Text Available The lossy hologram compression method with three different interpolations is investigated to compress images holographically recorded with optical scanning holography.Without loss of major reconstruction details,results have shown that the lossy compression method is able to achieve high compression ratio of up to 100.

  14. Three-dimensional reconstruction of sound fields based on the acousto-optic effect

    DEFF Research Database (Denmark)

    Fernandez Grande, Efren; Torras Rosell, Antoni

    2013-01-01

    The acousto-optic effect can be used to measure the pressure fluctuations in air created by acoustic disturbances (the propagation of light is affected by changes in the medium due to the presence of sound waves). This makes it possible to measure an arbitrary sound field using acousto...... of sound pressure fields from acousto-optic measurements in the audible frequency range, based on Fourier transforms and elementary wave expansion methods. The present study examines the complete reconstruction of the sound field from acousto-optic measurements, recovering all acoustic quantities......-optic tomography via scanning the field with a laser Doppler vibrometer. Consequently, the spatial characteristics of the sound field are captured in the measurement, implicitly bearing the potential for a full holographic reconstruction in a three-dimensional space. Recent studies have examined the reconstruction...

  15. Theory of Near-Field Scanning with a Probe Array

    Science.gov (United States)

    2014-01-01

    performing near-field measurement using an array of probes for antenna and bistatic radar cross section (RCS) applications. 15. SUBJECT TERMS...electromagnetic near-field measurement, antenna measurement, bistatic RCS measurement 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT... SAR 18. NUMBER OF PAGES 84 19a. NAME OF RESPONSIBLE PERSON (Monitor) a. REPORT Unclassified b. ABSTRACT Unclassified c. THIS PAGE

  16. Scanning laser optical computed tomography system for large volume 3D dosimetry

    Science.gov (United States)

    Dekker, Kurtis H.; Battista, Jerry J.; Jordan, Kevin J.

    2017-04-01

    Stray light causes artifacts in optical computed tomography (CT) that negatively affect the accuracy of radiation dosimetry in gels or solids. Scatter effects are exacerbated by a large dosimeter volume, which is desirable for direct verification of modern radiotherapy treatment plans such as multiple-isocenter radiosurgery. The goal in this study was to design and characterize an optical CT system that achieves high accuracy primary transmission measurements through effective stray light rejection, while maintaining sufficient scan speed for practical application. We present an optical imaging platform that uses a galvanometer mirror for horizontal scanning, and a translation stage for vertical movement of a laser beam and small area detector for minimal stray light production and acceptance. This is coupled with a custom lens-shaped optical CT aquarium for parallel ray sampling of projections. The scanner images 15 cm diameter, 12 cm height cylindrical volumes at 0.33 mm resolution in approximately 30 min. Attenuation coefficients reconstructed from CT scans agreed with independent cuvette measurements within 2% for both absorbing and scattering solutions as well as small 1.25 cm diameter absorbing phantoms placed within a large, scattering medium that mimics gel. Excellent linearity between the optical CT scanner and the independent measurement was observed for solutions with between 90% and 2% transmission. These results indicate that the scanner should achieve highly accurate dosimetry of large volume dosimeters in a reasonable timeframe for clinical application to radiotherapy dose verification procedures.

  17. Scanning laser optical computed tomography system for large volume 3D dosimetry.

    Science.gov (United States)

    Dekker, Kurtis H; Battista, Jerry J; Jordan, Kevin J

    2017-04-07

    Stray light causes artifacts in optical computed tomography (CT) that negatively affect the accuracy of radiation dosimetry in gels or solids. Scatter effects are exacerbated by a large dosimeter volume, which is desirable for direct verification of modern radiotherapy treatment plans such as multiple-isocenter radiosurgery. The goal in this study was to design and characterize an optical CT system that achieves high accuracy primary transmission measurements through effective stray light rejection, while maintaining sufficient scan speed for practical application. We present an optical imaging platform that uses a galvanometer mirror for horizontal scanning, and a translation stage for vertical movement of a laser beam and small area detector for minimal stray light production and acceptance. This is coupled with a custom lens-shaped optical CT aquarium for parallel ray sampling of projections. The scanner images 15 cm diameter, 12 cm height cylindrical volumes at 0.33 mm resolution in approximately 30 min. Attenuation coefficients reconstructed from CT scans agreed with independent cuvette measurements within 2% for both absorbing and scattering solutions as well as small 1.25 cm diameter absorbing phantoms placed within a large, scattering medium that mimics gel. Excellent linearity between the optical CT scanner and the independent measurement was observed for solutions with between 90% and 2% transmission. These results indicate that the scanner should achieve highly accurate dosimetry of large volume dosimeters in a reasonable timeframe for clinical application to radiotherapy dose verification procedures.

  18. Accuracy of optical scanning methods of the Cerec®3D system in the process of making ceramic inlays

    Directory of Open Access Journals (Sweden)

    Trifković Branka

    2010-01-01

    Full Text Available Background/Aim. One of the results of many years of Cerec® 3D CAD/CAM system technological development is implementation of one intraoral and two extraoral optical scanning methods which, depending on the current indications, are applied in making fixed restorations. The aim of this study was to determine the degree of precision of optical scanning methods by the use of the Cerec®3D CAD/CAM system in the process of making ceramic inlays. Methods. The study was conducted in three experimental groups of inlays prepared using the procedure of three methods of scanning Cerec ®3D system. Ceramic inlays made by conventional methodology were the control group. The accuracy of optical scanning methods of the Cerec®3D system computer aided designcomputer aided manufacturing (CAD/CAM was indirectly examined by measuring a marginal gap size between inlays and demarcation preparation by scanning electron microscope (SEM. Results. The results of the study showed a difference in the accuracy of the existing methods of scanning dental CAD/CAM systems. The highest level of accuracy was achieved by the extraoral optical superficial scanning technique. The value of marginal gap size inlays made with the technique of extraoral optical superficial scanning was 32.97 ± 13.17 μ. Techniques of intraoral optical superficial and extraoral point laser scanning showed a lower level of accuracy (40.29 ± 21.46 μ for inlays of intraoral optical superficial scanning and 99.67 ± 37.25 μ for inlays of extraoral point laser scanning. Conclusion. Optical scanning methods in dental CAM/CAM technologies are precise methods of digitizing the spatial models; application of extraoral optical scanning methods provides the hightest precision.

  19. Double acousto-optic deflector system for increased scanning range of laser beams.

    Science.gov (United States)

    Kastelik, J-C; Dupont, S; Yushkov, K B; Molchanov, V Ya; Gazalet, J

    2017-09-01

    A new laser scanning system is presented based on two wide-band acousto-optic deflectors. The interaction medium is tellurium dioxide. Anisotropic interactions take place under two different tangential phase matching configurations in such a way that the acousto-optic bandwidths add up. We demonstrate the feasibility of such a cascade deflection system for the wavelength of λ=514nm. The total frequency bandwidth is Δf=100MHz, equally distributed between the two acousto-optic deflectors. The total angular scan at the output is Δθ=4.4° leading to 125 resolvable spots for a 1mm truncated Gaussian beam. Copyright © 2017. Published by Elsevier B.V.

  20. A Scanning Multi-Axis Differential Optical Absorption Spectroscopy System for Measurement of Tropospheric NO2 in Beijing

    Institute of Scientific and Technical Information of China (English)

    LI Ang; XIE Pin-Hua; LIU Cheng; LIU Jian-Guo; LIU Wen-Qing

    2007-01-01

    A scanning multi-axis differential optical absorption spectroscopy (DOAS) system is developed for monitoring tropospheric NO2 abundance. Measurements at different viewing angles near the horizon can be performed sequentially with one telescope collecting scattered sunlight reflected by a moving mirror. Tropospheric NO2 diurnal variations can be derived from slant column densities (SCDs) of different elevation angles. The result from a field campaign in Beijing in summer of 2005 reveals potential possibility for the monitoring of tropospheric NO2 by multi-axis DOAS technique.

  1. Migratory birds use head scans to detect the direction of the earth's magnetic field.

    Science.gov (United States)

    Mouritsen, Henrik; Feenders, Gesa; Liedvogel, Miriam; Kropp, Wiebke

    2004-11-09

    Night-migratory songbirds are known to use a magnetic compass , but how do they detect the reference direction provided by the geomagnetic field, and where is the sensory organ located? The most prominent characteristic of geomagnetic sensory input, whether based on visual patterns or magnetite-mediated forces , is the predicted symmetry around the north-south or east-west magnetic axis. Here, we show that caged migratory garden warblers perform head-scanning behavior well suited to detect this magnetic symmetry plane. In the natural geomagnetic field, birds move toward their migratory direction after head scanning. In a zero-magnetic field , where no symmetry plane exists, the birds almost triple their head-scanning frequency, and the movement direction after a head scan becomes random. Thus, the magnetic sensory organ is located in the bird's head, and head scans are used to locate the reference direction provided by the geomagnetic field.

  2. Hyperspectral nanoscale imaging on dielectric substrates with coaxial optical antenna scan probes.

    Science.gov (United States)

    Weber-Bargioni, Alexander; Schwartzberg, Adam; Cornaglia, Matteo; Ismach, Ariel; Urban, Jeffrey J; Pang, Yuanjie; Gordon, Reuven; Bokor, Jeffrey; Salmeron, Miquel B; Ogletree, D Frank; Ashby, Paul; Cabrini, Stefano; Schuck, P James

    2011-03-09

    We have demonstrated hyperspectral tip-enhanced Raman imaging on dielectric substrates using linearly polarized light and nanofabricated coaxial antenna tips. A full Raman spectrum was acquired at each pixel of a 256 by 256 pixel contact-mode atomic force microscope image of carbon nanotubes grown on a fused silica microscope coverslip, allowing D and G mode intensity and D-mode peak shifts to be measured with ∼20 nm spatial resolution. Tip enhancement was sufficient to acquire useful Raman spectra in 50-100 ms. Coaxial scan probes combine the efficiency and enhanced, ultralocalized optical fields of plasmonically coupled antennae with the superior topographical imaging properties of sharp metal tips. The yield of the coaxial tip fabrication process is close to 100%, and the tips are sufficiently durable to support hours of contact-mode force microscope imaging. Our coaxial probes avoid the limitations associated with the "gap-mode" imaging geometry used in most tip-enhanced Raman studies to date, where a sharp metal tip is held ∼1 nm above a metallic substrate with the sample located in the gap.

  3. Synthetic gauge fields for light beams in optical resonators

    CERN Document Server

    Longhi, Stefano

    2015-01-01

    A method to realize artificial magnetic fields for light waves trapped in passive optical cavities with anamorphic optical elements is theoretically proposed. In particular, when a homogeneous magnetic field is realized, a highly-degenerate Landau level structure for the frequency spectrum of the transverse resonator modes is obtained, corresponding to a cyclotron motion of the optical cavity field. This can be probed by transient excitation of the passive optical resonator.

  4. Optical coherence tomography, scanning laser polarimetry and confocal scanning laser ophthalmoscopy in retinal nerve fiber layer measurements of glaucoma patients.

    Science.gov (United States)

    Fanihagh, Farsad; Kremmer, Stephan; Anastassiou, Gerasimos; Schallenberg, Maurice

    2015-01-01

    To determine the correlations and strength of association between different imaging systems in analyzing the retinal nerve fiber layer (RNFL) of glaucoma patients: optical coherence tomography (OCT), scanning laser polarimetry (SLP) and confocal scanning laser ophthalmoscopy (CSLO). 114 eyes of patients with moderate open angle glaucoma underwent spectral domain OCT (Topcon SD-OCT 2000 and Zeiss Cirrus HD-OCT), SLP (GDx VCC and GDx Pro) and CSLO (Heidelberg Retina Tomograph, HRT 3). Correlation coefficients were calculated between the structural parameters yielded by these examinations. The quantitative relationship between the measured RNFL thickness globally and for the four regions (superior, inferior, nasal, temporal) were evaluated with different regression models for all used imaging systems. The strongest correlation of RNFL measurements was found between devices using the same technology like GDx VCC and GDx Pro as well as Topcon OCT and Cirrus OCT. In glaucoma patients, the strongest associations (R²) were found between RNFL measurements of the two optical coherence tomography devices Topcon OCT and Cirrus OCT (R² = 0.513) and between GDx VCC and GDx Pro (R² = 0.451). The results of the OCTs and GDX Pro also had a strong quantitative relationship (Topcon OCT R² = 0.339 and Cirrus OCT R² = 0.347). GDx VCC and the OCTs showed a mild to moderate association (Topcon OCT R² = 0.207 and Cirrus OCT R² = 0.258). The confocal scanning laser ophthalmoscopy (HRT 3) had the lowest association to all other devices (Topcon OCT R² = 0.254, Cirrus OCT R² = 0.158, GDx Pro R² = 0.086 and GDx VCC R² = 0.1). The measurements of the RNFL in glaucoma patients reveal a high correlation of OCT and GDx devices because OCTs can measure all major retinal layers and SLP can detect nerve fibers allowing a comparison between the results of this devices. However, CSLO by means of HRT topography can only measure height values of the retinal surface but it cannot distinguish

  5. Miniaturized magnetic-driven scanning probe for endoscopic optical coherence tomography.

    Science.gov (United States)

    Pang, Ziwei; Wu, Jigang

    2015-06-01

    We designed and implemented a magnetic-driven scanning (MDS) probe for endoscopic optical coherence tomography (OCT). The probe uses an externally-driven tiny magnet in the distal end to achieve unobstructed 360-degree circumferential scanning at the side of the probe. The design simplifies the scanning part inside the probe and thus allows for easy miniaturization and cost reduction. We made a prototype probe with an outer diameter of 1.4 mm and demonstrated its capability by acquiring OCT images of ex vivo trachea and artery samples from a pigeon. We used a spectrometer-based Fourier-domain OCT system and the system sensitivity with our prototype probe was measured to be 91 dB with an illumination power of 850 μW and A-scan exposure time of 1 ms. The axial and lateral resolutions of the system are 6.5 μm and 8.1 μm, respectively.

  6. High resolution imaging of dielectric surfaces with an evanescent field optical microscope

    NARCIS (Netherlands)

    Hulst, van N.F.; Segerink, F.B.; Bölger, B.

    1992-01-01

    An evanescent field optical microscope (EFOM) is presented which employs frustrated total internal reflection o­n a localized scale by scanning a dielectric tip in close proximity to a sample surface. High resolution images of dielectric gratings and spheres containing both topographic and dielectri

  7. Optical near-field lithography on hydrogen-passivated silicon surfaces

    DEFF Research Database (Denmark)

    Madsen, Steen; Müllenborn, Matthias; Birkelund, Karen

    1996-01-01

    We report on a novel lithography technique for patterning of hydrogen-passivated amorphous silicon surfaces. A reflection mode scanning near-field optical microscope with uncoated fiber probes has been used to locally oxidize a thin amorphous silicon layer. Lines of 110 nm in width, induced...

  8. Four-probe scanning tunnelling microscope with atomic resolution for electrical and electro-optical property measurements of nanosystems

    Institute of Scientific and Technical Information of China (English)

    Lin Xiao; He Xiao-Bo; Lu Jun-Ling; Gao Li; Huan Qing; Shi Dong-Xia; Gao Hong-Jun

    2005-01-01

    We demonstrate a special four-probe scanning tunnelling microscope (STM) system in ultrahigh vacuum (UHV),which can provide coarse positioning for every probe independently with the help of scanning electron microscope (SEM)and fine positioning down to nanometre using the STM technology. The system allows conductivity measurement by means of a four-point probe method, which can draw out more accurate electron transport characteristics in nanostructures, and provides easy manipulation of low dimension materials. All measurements can be performed in variable temperature (from 30K to 500K), magnetic field (from 0 to 0.1T), and different gas environments. Simultaneously, the cathodoluminescence (CL) spectrum can be achieved through an optical subsystem. Test measurements using some nanowire samples show that this system is a powerful tool in exploring electron transport characteristics and spectra in nanoscale physics.

  9. Design and construction of a fine drive system for scanning optical elements

    Science.gov (United States)

    Golnabi, H.; Jafari, R.

    2008-09-01

    The design and operation of a simple mechanical drive system, which is able to perform a fine course of angular motion, are reported. The system consists of a lead screw, a drive nut, sine bar legs, and an output shaft that can scan the optical holder mount. With a stepper motor coupled to the lead screw and interfaced to a PC, it is possible to control the scanning operation. When a 800 step/turn motor is used, it is possible to have an angular resolution of about 0.5 mdegree for a dynamic range of about 23°. The reproducibility of the results is about 0.22% for the scan angle and the hysteresis effect of the system is in the range of 1.71%. For a total scan of 51,200 steps, a scan angle of about 23.3° is acheived. The fitted line to the experimental results shows that scan angle changes linearly with the scan length. With good precision in system construction and careful alignment, the overall nonlinearity can be less than 1%.

  10. Near-field driving of a optical monopole antenna

    NARCIS (Netherlands)

    Taminiau, Tim H.; Segerink, Franciscus B.; Moerland, R.J.; Kuipers, L.; van Hulst, N.F.

    2007-01-01

    Nanosized optical antennas have the potential to confine and enhance optical electromagnetic fields, making nano-antennas essential tools for applications in integrated nano-optical devices and high-resolution microscopy. The size, shape and material of the nano-antenna, together with the optical

  11. Optical design and multi-length-scale scanning spectro-microscopy possibilities at the Nanoscopium beamline of Synchrotron Soleil.

    Science.gov (United States)

    Somogyi, Andrea; Medjoubi, Kadda; Baranton, Gil; Le Roux, Vincent; Ribbens, Marc; Polack, François; Philippot, Pascal; Samama, Jean Pierre

    2015-07-01

    The Nanoscopium 155 m-long beamline of Synchrotron Soleil is dedicated to scanning hard X-ray nanoprobe techniques. Nanoscopium aims to reach ≤100 nm resolution in the 5-20 keV energy range for routine user experiments. The beamline design tackles the tight stability requirements of such a scanning nanoprobe by creating an overfilled secondary source, implementing all horizontally reflecting main beamline optics, applying high mechanical stability equipment and constructing a dedicated high-stability building envelope. Multi-technique scanning imaging and tomography including X-ray fluorescence spectrometry and spectro-microscopy, absorption, differential phase and dark-field contrasts are implemented at the beamline in order to provide simultaneous information on the elemental distribution, speciation and sample morphology. This paper describes the optical concept and the first measured performance of the Nanoscopium beamline followed by the hierarchical length-scale multi-technique imaging experiments performed with dwell times down to 3 ms per pixel.

  12. Multimodal backside imaging of a microcontroller using confocal laser scanning and optical-beam-induced current imaging

    Science.gov (United States)

    Finkeldey, Markus; Göring, Lena; Schellenberg, Falk; Brenner, Carsten; Gerhardt, Nils C.; Hofmann, Martin

    2017-02-01

    Microscopy imaging with a single technology is usually restricted to a single contrast mechanism. Multimodal imaging is a promising technique to improve the structural information that could be obtained about a device under test (DUT). Due to the different contrast mechanisms of laser scanning microscopy (LSM), confocal laser scanning microscopy (CLSM) and optical beam induced current microscopy (OBICM), a combination could improve the detection of structures in integrated circuits (ICs) and helps to reveal their layout. While OBIC imaging is sensitive to the changes between differently doped areas and to semiconductor-metal transitions, CLSM imaging is mostly sensitive to changes in absorption and reflection. In this work we present the implementation of OBIC imaging into a CLSM. We show first results using industry standard Atmel microcontrollers (MCUs) with a feature size of about 250nm as DUTs. Analyzing these types of microcontrollers helps to improve in the field of side-channel attacks to find hardware Trojans, possible spots for laser fault attacks and for reverse engineering. For the experimental results the DUT is placed on a custom circuit board that allows us to measure the current while imaging it in our in-house built stage scanning microscope using a near infrared (NIR) laser diode as light source. The DUT is thinned and polished, allowing backside imaging through the Si-substrate. We demonstrate the possibilities using this optical setup by evaluating OBIC, LSM and CLSM images above and below the threshold of the laser source.

  13. Large-aperture space optical system testing based on the scanning Hartmann.

    Science.gov (United States)

    Wei, Haisong; Yan, Feng; Chen, Xindong; Zhang, Hao; Cheng, Qiang; Xue, Donglin; Zeng, Xuefeng; Zhang, Xuejun

    2017-03-10

    Based on the Hartmann testing principle, this paper proposes a novel image quality testing technology which applies to a large-aperture space optical system. Compared with the traditional testing method through a large-aperture collimator, the scanning Hartmann testing technology has great advantages due to its simple structure, low cost, and ability to perform wavefront measurement of an optical system. The basic testing principle of the scanning Hartmann testing technology, data processing method, and simulation process are presented in this paper. Certain simulation results are also given to verify the feasibility of this technology. Furthermore, a measuring system is developed to conduct a wavefront measurement experiment for a 200 mm aperture optical system. The small deviation (6.3%) of root mean square (RMS) between experimental results and interferometric results indicates that the testing system can measure low-order aberration correctly, which means that the scanning Hartmann testing technology has the ability to test the imaging quality of a large-aperture space optical system.

  14. Scanning a DNA molecule for bound proteins using hybrid magnetic and optical tweezers.

    Directory of Open Access Journals (Sweden)

    Marijn T J van Loenhout

    Full Text Available The functional state of the genome is determined by its interactions with proteins that bind, modify, and move along the DNA. To determine the positions and binding strength of proteins localized on DNA we have developed a combined magnetic and optical tweezers apparatus that allows for both sensitive and label-free detection. A DNA loop, that acts as a scanning probe, is created by looping an optically trapped DNA tether around a DNA molecule that is held with magnetic tweezers. Upon scanning the loop along the λ-DNA molecule, EcoRI proteins were detected with ~17 nm spatial resolution. An offset of 33 ± 5 nm for the detected protein positions was found between back and forwards scans, corresponding to the size of the DNA loop and in agreement with theoretical estimates. At higher applied stretching forces, the scanning loop was able to remove bound proteins from the DNA, showing that the method is in principle also capable of measuring the binding strength of proteins to DNA with a force resolution of 0.1 pN/[Formula: see text]. The use of magnetic tweezers in this assay allows the facile preparation of many single-molecule tethers, which can be scanned one after the other, while it also allows for direct control of the supercoiling state of the DNA molecule, making it uniquely suitable to address the effects of torque on protein-DNA interactions.

  15. Scanning a DNA molecule for bound proteins using hybrid magnetic and optical tweezers.

    Science.gov (United States)

    van Loenhout, Marijn T J; De Vlaminck, Iwijn; Flebus, Benedetta; den Blanken, Johan F; Zweifel, Ludovit P; Hooning, Koen M; Kerssemakers, Jacob W J; Dekker, Cees

    2013-01-01

    The functional state of the genome is determined by its interactions with proteins that bind, modify, and move along the DNA. To determine the positions and binding strength of proteins localized on DNA we have developed a combined magnetic and optical tweezers apparatus that allows for both sensitive and label-free detection. A DNA loop, that acts as a scanning probe, is created by looping an optically trapped DNA tether around a DNA molecule that is held with magnetic tweezers. Upon scanning the loop along the λ-DNA molecule, EcoRI proteins were detected with ~17 nm spatial resolution. An offset of 33 ± 5 nm for the detected protein positions was found between back and forwards scans, corresponding to the size of the DNA loop and in agreement with theoretical estimates. At higher applied stretching forces, the scanning loop was able to remove bound proteins from the DNA, showing that the method is in principle also capable of measuring the binding strength of proteins to DNA with a force resolution of 0.1 pN/[Formula: see text]. The use of magnetic tweezers in this assay allows the facile preparation of many single-molecule tethers, which can be scanned one after the other, while it also allows for direct control of the supercoiling state of the DNA molecule, making it uniquely suitable to address the effects of torque on protein-DNA interactions.

  16. Magnetic field imaging of a tungsten carbide film by scanning nano-SQUID microscope

    Science.gov (United States)

    Shibata, Yusuke; Nomura, Shintaro; Ishiguro, Ryosuke; Kashiwaya, Hiromi; Kashiwaya, Satoshi; Nago, Yusuke; Takayanagi, Hideaki

    2016-10-01

    We present the results of magnetic field imaging by scanning nano-superconducting quantum interference device (SQUID) microscopy on a tungsten carbide (W-C) film fabricated using focused-ion-beam chemical vapor deposition. We have investigated magnetic field change by a W-C film in an external magnetic field using a scanning nano-SQUID microscope system. We have found that the reduction of the magnetic field above the W-C film was 0.9%, indicating the penetration of vortices in the W-C at an external magnetic field of 0.171 mT.

  17. Factors Affecting Cirrus-HD OCT Optic Disc Scan Quality: A Review with Case Examples

    Directory of Open Access Journals (Sweden)

    Joshua S. Hardin

    2015-01-01

    Full Text Available Spectral-domain OCT is an established tool to assist clinicians in detecting glaucoma and monitor disease progression. The widespread use of this imaging modality is due, at least in part, to continuous hardware and software advancements. However, recent evidence indicates that OCT scan artifacts are frequently encountered in clinical practice. Poor image quality invariably challenges the interpretation of test results, with potential implications for the care of glaucoma patients. Therefore, adequate knowledge of various imaging artifacts is necessary. In this work, we describe several factors affecting Cirrus HD-OCT optic disc scan quality and their effects on measurement variability.

  18. Optical discrimination of benign and malignant oral tissue using Z-scan technique.

    Science.gov (United States)

    Salman, Mohajer; Hossein, Majles Ara Mohammad; Kamran, Kamrava Seyed; Shayan, Maleki

    2016-12-01

    A new optical method to discriminate benign and malignant oral tissue is reported. Twenty four tissue biopsy of patients tumor have been prepared in standard method without coloring process. The CW He-Ne laser beam interrogated the samples in optical setup. Linear absorption of tissues in laser wavelength measured and nonlinear behavior of tissue biopsies has been investigated by Z-scan setup. We used some simple optical instruments to focus on microsize region of biolayer to investigate less number of cells and to take repeatable test. Results show that the malignant samples have more attenuation than benign samples. Furthermore nonlinear refractive index (n2) of malignant biolayers has positive sign and n2 of benign biopsies has negative sign with the 10(-8)(cm(2)/W) order of magnitude. So this optical method may be used to discriminate malignant from benign tissues. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Comparasion of Optic Nerve Head with Stereophotometric and Scanning Laser Ophthalmoscopic Imaging

    Directory of Open Access Journals (Sweden)

    Serek Tekin

    2016-01-01

    Full Text Available Aim: To compare theevaluation results of two experienced clinicians about examination of optic discs in glaucoma patients and healthy inidividuals by stereophotometry and scanning laser ophthalmoscopy. Material and Method: We studied 116 individuals (217 eyes who were divided as normal, glaucoma and suspected glaucoma in numbers of 54, 42 and 20 respectively. Stereophotometric photographs of optic disc were examined with fundus camera (Zeiss, FF 450 plus. Optic disc was also evaluated with HRT-3 in the same visit. Two experienced clinicians evaluated the cup/disc ratios and whether the optic discs were glaucomatous or not. Evaluation results were analysed and compared with HRT-3 examinations. Results:There were no significant age and gende rdifferences between the groups(p>0.05.Stereophotographic C/D ratio correlations between the clinicians were 0.79 (p

  20. Analysis of adaptive laser scanning optical system with focus-tunable components

    Science.gov (United States)

    Pokorný, P.; Mikš, A.; Novák, J.; Novák, P.

    2015-05-01

    This work presents a primary analysis of an adaptive laser scanner based on two-mirror beam-steering device and focustunable components (lenses with tunable focal length). It is proposed an optical scheme of an adaptive laser scanner, which can focus the laser beam in a continuous way to a required spatial position using the lens with tunable focal length. This work focuses on a detailed analysis of the active optical or opto-mechanical components (e.g. focus-tunable lenses) mounted in the optical systems of laser scanners. The algebraic formulas are derived for ray tracing through different configurations of the scanning optical system and one can calculate angles of scanner mirrors and required focal length of the tunable-focus component provided that the position of the focused beam in 3D space is given with a required tolerance. Computer simulations of the proposed system are performed using MATLAB.

  1. Double phi-Step theta-Scanning Technique for Spherical Near-Field Antenna Measurements

    DEFF Research Database (Denmark)

    Laitinen, Tommi

    2008-01-01

    Probe-corrected spherical near-field antenna measurements with an arbitrary probe set certain requirements on an applicable scanning technique. The computational complexity of the general high-order probe correction technique for an arbitrary probe, that is based on the Phi scanning, is O(N4), wh...

  2. Calibration-free B-scan images produced by master/slave optical coherence tomography

    OpenAIRE

    Bradu, Adrian; Podoleanu, Adrian G.H.

    2014-01-01

    We report on a novel method to produce B-scan images in spectral domain optical coherence tomography (SD-OCT). The method proceeds in two steps. In the first step, using a mirror in the sample arm of the interferometer, channeled spectra are acquired for different values of the optical path difference (OPD) and stored as masks. In the second step, the mirror is replaced with an object and the captured channelled spectrum is correlated with each mask, providing the interference strength from t...

  3. Optical characterization of individual semiconductor nanostructures using a scanning tunneling microscope.

    Science.gov (United States)

    Tsuruoka, Tohru; Ushioda, Sukekatsu

    2004-01-01

    By injecting low-energy minority carriers from the tip of a scanning tunneling microscope (STM) and analyzing the light emitted from the tip-sample gap of the STM, it is possible to study the optical and electronic properties of individual semiconductor nanostructures with an extremely high spatial resolution close to the atomic scale. This technique has been applied to investigate the transport properties of hot electrons injected into AlGaAs/GaAs quantum well structures and the optical properties of single self-assembled InAs/AlGaAs quantum dots. The physical principles, usefulness and future expectations of this novel technique are discussed.

  4. Field Theory for Coherent Optical Pulse Propagation

    CERN Document Server

    Park, Q H

    1997-01-01

    We introduce a new notion of "matrix potential" to nonlinear optical systems. In terms of a matrix potential $g$, we present a gauge field theoretic formulation of the Maxwell-Bloch equation that provides a semiclassical description of the propagation of optical pulses through resonant multi-level media. We show that the Bloch part of the equation can solved identically through $g$ and the remaining Maxwell equation becomes a second order differential equation with reduced set of variables due to the gauge invariance of the system. Our formulation clarifies the (nonabelian) symmetry structure of the Maxwell-Bloch equations for various multi-level media in association with symmetric spaces $G/H$. In particular, we associate nondegenerate two-level system for self-induced transparency with $G/H=SU(2)/U(1)$ and three-level $\\L $- or V-systems with $G/H = SU(3)/U(2)$. We give a detailed analysis for the two-level case in the matrix potential formalism, and address various new properties of the system including so...

  5. Near-Field Optical Microscopy and Spectroscopy with Pointed Probes

    Science.gov (United States)

    2006-01-01

    metal nanostructure can be viewed as an optical antenna . Of course, the efficiency depends on the material composition and the geometry of the...nanostructure. A simple form of optical antenna is a single ellipsoidal particle. This particle ex- hibits a distinct resonance for which the field...Grober RD, Schoelkopf RJ, Prober DE. 1997. Optical antenna : towards a unity efficiency near-field optical probe. Appl. Phys. Lett. 70:1354 54. Farahani

  6. Validation of EMC near-field scanning amplitude and phase measurement data

    DEFF Research Database (Denmark)

    Mynster, Anders P.; Sørensen, Morten

    2012-01-01

    A frequency selection and data validation procedure is presented. It shows that using data from the reference channel it makes possible to estimate the validity of the measured data from an EMC near-field scan with phase on active circuits.......A frequency selection and data validation procedure is presented. It shows that using data from the reference channel it makes possible to estimate the validity of the measured data from an EMC near-field scan with phase on active circuits....

  7. Z-scan technique for investigation of the noninstantaneous optical Kerr nonlinearity.

    Science.gov (United States)

    Gu, Bing; Wang, Hui-Tian; Ji, Wei

    2009-09-15

    By treating laser-induced optical Kerr nonlinearity as a noninstantaneous decaying process, we present the pulse-duration-dependent Z-scan analytical expressions for an arbitrary aperture and an arbitrary nonlinear magnitude. This theory has the capacity to characterize the third-order nonlinear refraction induced by a laser pulse with its temporal duration being much longer than or comparable to the recovery time of the nonlinear effect. Through Z-scan measurements at different pulse durations, the nonlinear refractive coefficient and the recovery time could be determined unambiguously and simultaneously. Furthermore, the theory can be utilized to confirm whether the measured optical Kerr nonlinearity is instantaneous or noninstantaneous with respect to the given pulse duration.

  8. Active eye-tracking for an adaptive optics scanning laser ophthalmoscope

    Science.gov (United States)

    Sheehy, Christy K.; Tiruveedhula, Pavan; Sabesan, Ramkumar; Roorda, Austin

    2015-01-01

    We demonstrate a system that combines a tracking scanning laser ophthalmoscope (TSLO) and an adaptive optics scanning laser ophthalmoscope (AOSLO) system resulting in both optical (hardware) and digital (software) eye-tracking capabilities. The hybrid system employs the TSLO for active eye-tracking at a rate up to 960 Hz for real-time stabilization of the AOSLO system. AOSLO videos with active eye-tracking signals showed, at most, an amplitude of motion of 0.20 arcminutes for horizontal motion and 0.14 arcminutes for vertical motion. Subsequent real-time digital stabilization limited residual motion to an average of only 0.06 arcminutes (a 95% reduction). By correcting for high amplitude, low frequency drifts of the eye, the active TSLO eye-tracking system enabled the AOSLO system to capture high-resolution retinal images over a larger range of motion than previously possible with just the AOSLO imaging system alone. PMID:26203370

  9. Active eye-tracking for an adaptive optics scanning laser ophthalmoscope.

    Science.gov (United States)

    Sheehy, Christy K; Tiruveedhula, Pavan; Sabesan, Ramkumar; Roorda, Austin

    2015-07-01

    We demonstrate a system that combines a tracking scanning laser ophthalmoscope (TSLO) and an adaptive optics scanning laser ophthalmoscope (AOSLO) system resulting in both optical (hardware) and digital (software) eye-tracking capabilities. The hybrid system employs the TSLO for active eye-tracking at a rate up to 960 Hz for real-time stabilization of the AOSLO system. AOSLO videos with active eye-tracking signals showed, at most, an amplitude of motion of 0.20 arcminutes for horizontal motion and 0.14 arcminutes for vertical motion. Subsequent real-time digital stabilization limited residual motion to an average of only 0.06 arcminutes (a 95% reduction). By correcting for high amplitude, low frequency drifts of the eye, the active TSLO eye-tracking system enabled the AOSLO system to capture high-resolution retinal images over a larger range of motion than previously possible with just the AOSLO imaging system alone.

  10. New optical field operator expansion in number state representation

    Institute of Scientific and Technical Information of China (English)

    Yang Yang; Fan Hong-Yi

    2013-01-01

    By virtue of the Weyl ordering method,we find a new formalism of optical field operator expansion in number state representation.Miscellaneous optical fields' (coherent state,squeezed field,Wigner operator,etc.) new expansions are therefore exhibited.Some new generating functions of special polynomials are derived herewith.

  11. Development of scanning laser sensor for underwater 3D imaging with the coaxial optics

    Science.gov (United States)

    Ochimizu, Hideaki; Imaki, Masaharu; Kameyama, Shumpei; Saito, Takashi; Ishibashi, Shoujirou; Yoshida, Hiroshi

    2014-06-01

    We have developed the scanning laser sensor for underwater 3-D imaging which has the wide scanning angle of 120º (Horizontal) x 30º (Vertical) with the compact size of 25 cm diameter and 60 cm long. Our system has a dome lens and a coaxial optics to realize both the wide scanning angle and the compactness. The system also has the feature in the sensitivity time control (STC) circuit, in which the receiving gain is increased according to the time of flight. The STC circuit contributes to detect a small signal by suppressing the unwanted signals backscattered by marine snows. We demonstrated the system performance in the pool, and confirmed the 3-D imaging with the distance of 20 m. Furthermore, the system was mounted on the autonomous underwater vehicle (AUV), and demonstrated the seafloor mapping at the depth of 100 m in the ocean.

  12. A correlative optical microscopy and scanning electron microscopy approach to locating nanoparticles in brain tumors.

    Science.gov (United States)

    Kempen, Paul J; Kircher, Moritz F; de la Zerda, Adam; Zavaleta, Cristina L; Jokerst, Jesse V; Mellinghoff, Ingo K; Gambhir, Sanjiv S; Sinclair, Robert

    2015-01-01

    The growing use of nanoparticles in biomedical applications, including cancer diagnosis and treatment, demands the capability to exactly locate them within complex biological systems. In this work a correlative optical and scanning electron microscopy technique was developed to locate and observe multi-modal gold core nanoparticle accumulation in brain tumor models. Entire brain sections from mice containing orthotopic brain tumors injected intravenously with nanoparticles were imaged using both optical microscopy to identify the brain tumor, and scanning electron microscopy to identify the individual nanoparticles. Gold-based nanoparticles were readily identified in the scanning electron microscope using backscattered electron imaging as bright spots against a darker background. This information was then correlated to determine the exact location of the nanoparticles within the brain tissue. The nanoparticles were located only in areas that contained tumor cells, and not in the surrounding healthy brain tissue. This correlative technique provides a powerful method to relate the macro- and micro-scale features visible in light microscopy with the nanoscale features resolvable in scanning electron microscopy.

  13. Optical Conductivity of Anisotropic Quantum Dots in Magnetic Fields

    Institute of Scientific and Technical Information of China (English)

    GUO Kang-Xian; CHEN Chuan-Yu

    2005-01-01

    @@ Optical conductivity of anisotropic double-parabolic quantum dots is investigated with the memory-function approach, and the analytic expression for the optical conductivity is derived. With characteristic parameterspertaining to GaAs, the numerical results are presented. It is shown that: (1) the larger the optical phonon frequency ωLO, the stronger the peak intensity of the optical conductivity, and the more asymmetric the shape of the optical conductivity; (2) the magnetic field enhances the optical conductivity for levels l = 0 and l = 1, with or without electron-LO-phonon interactions; (3) the larger the quantum dot thickness lz, the smaller the optical conductivity σ(ω).

  14. Creating optical near-field orbital angular momentum in a gold metasurface.

    Science.gov (United States)

    Chen, Ching-Fu; Ku, Chen-Ta; Tai, Yi-Hsin; Wei, Pei-Kuen; Lin, Heh-Nan; Huang, Chen-Bin

    2015-04-01

    Nanocavities inscribed in a gold thin film are optimized and designed to form a metasurface. We demonstrate both numerically and experimentally the creation of surface plasmon (SP) vortex carrying orbital angular momentum in the metasurface under linearly polarized optical excitation that carries no optical angular momentum. Moreover, depending on the orientation of the exciting linearly polarized light, we show that the metasurface is capable of providing dynamic switching between SP vortex formation or SP subwavelength focusing. The resulting SP intensities are experimentally measured using a near-field scanning optical microscope and are found in excellent quantitative agreements as compared to the numerical results.

  15. Determination of electric field, magnetic field, and electric current distributions of infrared optical antennas: A nano-optical vector network analyzer

    CERN Document Server

    Olmon, Robert L; Krenz, Peter M; Lail, Brian A; Saraf, Laxmikant V; Boreman, Glenn D; Raschke, Markus B

    2010-01-01

    In addition to the electric field E(r), the associated magnetic field H(r) and current density J(r) characterize any electromagnetic device, providing insight into antenna coupling and mutual impedance. We demonstrate the optical analogue of the radio frequency vector network analyzer implemented in interferometric homodyne scattering-type scanning near-field optical microscopy (s-SNOM) for obtaining E(r), H(r), and J(r). The approach is generally applicable and demonstrated for the case of a linear coupled-dipole antenna in the mid-infrared. The determination of the underlying 3D vector electric near-field distribution E(r) with nanometer spatial resolution and full phase and amplitude information is enabled by the design of probe tips with selectivity with respect to E-parallel and E-perpendicular fabricated by focused ion-beam milling and nano-CVD.

  16. Progress in nano-electro optics characterization of nano-optical materials and optical near-field interactions

    CERN Document Server

    Ohtsu, Motoichi

    2005-01-01

    This volume focuses on the characterization of nano-optical materials and optical-near field interactions. It begins with the techniques for characterizing the magneto-optical Kerr effect and continues with methods to determine structural and optical properties in high-quality quantum wires with high spatial uniformity. Further topics include: near-field luminescence mapping in InGaN/GaN single quantum well structures in order to interpret the recombination mechanism in InGaN-based nano-structures; and theoretical treatment of the optical near field and optical near-field interactions, providing the basis for investigating the signal transport and associated dissipation in nano-optical devices. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  17. Three dimensional image reconstruction based on a wide-field optical coherence tomography system

    Science.gov (United States)

    Feng, Yinqi; Feng, Shengtong; Zhang, Min; Hao, Junjun

    2014-07-01

    Wide-field optical coherence tomography has a promising application for its high scanning rate and resolution. The principle of a wide-field optical coherence tomography system is described, and 2D images of glass slides are reconstructed using eight-stepped phase-shifting method in the system. Using VC6.0 and OpenGL programming, 3D images are reconstructed based on the Marching Cube algorithm with 2D image sequences. The experimental results show that the depth detection and three-dimensional tomography for translucent materials could be implemented efficiently in the WFOCT system.

  18. Field Demonstration of Electro-Scan Defect Location Technology for Condition Assessment of Wastewater Collection Systems

    Science.gov (United States)

    The purpose of the field demonstration program is to gather technically reliable cost and performance information on selected condition assessment technologies under defined field conditions. The selected technologies include zoom camera, electro-scan (FELL-41), and a multi-sens...

  19. Near-field speckle-scanning-based x-ray imaging

    OpenAIRE

    Berujon, Sebastien; Ziegler, Eric

    2015-01-01

    The x-ray near-field speckle-scanning concept is an approach recently introduced to obtain absorption, phase, and dark-field images of a sample. In this paper, we present ways of recovering from a sample its ultrasmall-angle x-ray scattering distribution using numerical deconvolution. We also show how to access the 2D phase gradient signal from random step scans, the latter having the potential to elude the flat-field correction error. Each feature is explained theoretically and demonstrated ...

  20. Optical field enhancement of nanometer-sized gaps at near-infrared frequencies.

    Science.gov (United States)

    Ahn, Jae Sung; Kang, Taehee; Singh, Dilip K; Bahk, Young-Mi; Lee, Hyunhwa; Choi, Soo Bong; Kim, Dai-Sik

    2015-02-23

    We report near-field and far-field measurements of transmission through nanometer-sized gaps at near-infrared frequencies with varying the gap size from 1 nm to 10 nm. In the far-field measurements, we excluded direct transmission on the metal film surface via interferometric method. Kirchhoff integral formalism was used to relate the far-field intensity to the electric field at the nanogaps. In near-field measurements, field enhancement factors of the nanogaps were quantified by measuring transmission of the nanogaps using near-field scanning optical microscopy. All the measurements produce similar field enhancements of about ten, which we put in the context of comparing with the giant field enhancements in the terahertz regime.

  1. Tailoring optical complex fields with nano-metallic surfaces

    Directory of Open Access Journals (Sweden)

    Rui Guanghao

    2015-04-01

    Full Text Available Recently there is an increasing interest in complex optical fields with spatially inhomogeneous state of polarizations and optical singularities. Novel effects and phenomena have been predicted and observed for light beams with these unconventional states. Nanostructured metallic thin film offers unique opportunities to generate, manipulate and detect these novel fields. Strong interactions between nano-metallic surfaces and complex optical fields enable the development of highly compact and versatile functional devices and systems. In this review, we first briefly summarize the recent developments in complex optical fields. Various nano-metallic surface designs that can produce and manipulate complex optical fields with tailored characteristics in the optical far field will be presented. Nano-metallic surfaces are also proven to be very effective for receiving and detection of complex optical fields in the near field. Advances made in this nascent field may enable the design of novel photonic devices and systems for a variety of applications such as quantum optical information processing and integrated photonic circuits.

  2. Experimental Investigation of Integrated Optical Intensive Impulse Electric Field Sensors

    Institute of Scientific and Technical Information of China (English)

    SUN Bao; CHEN Fu-Shen

    2009-01-01

    We design and fabricate an integrated optical electric field sensor with segmented electrode for intensive im-pulse electric field measurement. The integrated optical sensor is based on a Mach-Zehnder interferometer with segmented electrodes. The output/input character of the sensing system is analysed and measured. The max-imal detectable electric field range (-75 kV/m to 245 kV/m) is obtained by analysing the results. As a result, the integrated optics electric field sensing system is suitable for transient intensive electric field measurement investigation.

  3. Nonlinear Optical Response of Conjugated Polymer to Electric Field

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yu-fang; ZHUANG De-xin; CUI Bin

    2005-01-01

    The organic π-conjugated polymers are of major interest materials for the use in electro-optical and nonlinear optical devices. In this work, for a selected polyacetylene chain, the optical absorption spectra in UV/Vis regime as well as the linear polarizabilitiy and nonlinear hyperpolarizability are calculated by using quantum chemical ab initio and semiempirical methods. The relationship of its optical property to electric field is obtained. Some physical mechanism of electric field effect on molecular optical property is discussed by means of electron distribution and intramolecular charge transfer.

  4. Percolation of optical excitation mediated by near-field interactions

    CERN Document Server

    Naruse, Makoto; Takahashi, Taiki; Aono, Masashi; Akahane, Kouichi; D'Acunto, Mario; Hori, Hirokazu; Thylen, Lars; Katori, Makoto; Ohtsu, Motoichi

    2016-01-01

    Optical excitation transfer in nanostructured matter has been intensively studied in various material systems for versatile applications. Herein, we discuss the percolation of optical excitations in randomly organized nanostructures caused by optical near-field interactions governed by Yukawa potential in a two-dimensional stochastic model. The model results demonstrate the appearance of two phases of percolation of optical excitation as a function of the localization degree of near-field interaction. Moreover, it indicates sublinear scaling with percolation distance when the light localization is strong. The results provide fundamental insights into optical excitation transfer and will facilitate the design and analysis of nanoscale signal-transfer characteristics.

  5. Review Of Fiber-Optic Electric-Field Sensors

    Science.gov (United States)

    De Paula, Ramon P.; Jarzynski, Jacek

    1989-01-01

    Tutorial paper reviews state of art in fiber-optic sensors of alternating electric fields. Because such sensors are made entirely of dielectric materials, they are relatively transparent to incident electric fields; they do not distort fields significantly. Paper presents equations that express relationships among stress, strain, and electric field in piezoactive plastic and equations for phase shift in terms of photoelastic coefficients and strains in optical fiber.

  6. Bell inequalities for quantum optical fields

    Science.gov (United States)

    Żukowski, Marek; Wieśniak, Marcin; Laskowski, Wiesław

    2016-08-01

    The commonly used "practical" Bell inequalities for quantum optical fields, which use intensities as the observables, are derivable only if specific additional assumptions hold. This limits the range of local hidden variable theories, which are invalidated by their violation. We present alternative Bell inequalities, which do not suffer from any (theoretical) loophole. The inequalities are for correlations of averaged products of local rates. By rates we mean ratios of the measured intensity in the given local output channel to the total local measured intensity, in the given run of the experiment. Bell inequalities of this type detect entanglement in situations in which the "practical" ones fail. Thus, we have full consistency with Bell's theorem, and better device-independent entanglement indicators. Strongly driven type-II parametric down conversion (bright squeezed vacuum) is our working example. The approach can be used to modify many types of standard Bell inequalities, to the case of undefined particle numbers. The rule is to replace the usual probabilities by rates.

  7. Concept of far-field optical evaluation of the apparatus function of an SNOM tip

    Science.gov (United States)

    Voznesensky, Nikolay B.; Veiko, Vadim P.; Ivanova, Tatiana V.; Lee, Kyeong-Hee

    2004-04-01

    An approach to the optical investigation of probes for scanning near-field optical microscopes (SNOM tips) and recognition of their near-field parameters by far-field measurements is considered. The comparison of approximate calculations of vector light field diffracted by a subwavelength aperture with more rigorous calculations of the light field passing through a tapered end of a SNOM tip is presented. A numerical iterative procedure of the SNOM tip aperture reconstruction by the analytical continuation of the emerging light Fourier spectrum is presented. The approach is based on the use of plane waves covering a wide range of spatial frequencies. The results of experimental measurements and far-field data treatment with the definition of a subwavelength aperture are discussed.

  8. A Dark-field Scanning In Situ Spectroscopy Platform for Broadband Imaging of Resected Tissue

    Science.gov (United States)

    Krishnaswamy, Venkataramanan; Laughney, Ashley M.; Paulsen, Keith D.; Pogue, Brian W.

    2012-01-01

    A dark-field geometry spectral imaging system is presented to raster-scan thick tissue samples in situ in 1.5cm square sections, recovering full spectra from each 100 microns diameter pixel. This spot size provides adequate resolution for wide field scanning, while also facilitating scatter imaging without requiring sophisticated light-tissue transport modeling. The system is demonstrated showing accurate estimation of localized scatter parameters and the potential to recover absorption-based contrast from broadband reflectance data measured from 480nm up to 750nm in tissue phantoms. Results obtained from xenograft pancreas tumors show the ability to quantitatively image changes in localized scatter response in this fast imaging geometry. The polychromatic raster scan design allows the rapid scanning necessary for use in surgical/clinical applications where timely decisions are required about tissue pathology. PMID:21593932

  9. Optical Design for the Off-axis Reflective Optics with Wide Field

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Reflective optics with wide field of view has been applied more and more widely in EUVL or space optics, and also plays an important role in promoting scientific and technological research. Among the reflective optics, the off-axis reflective optics is the most hopeful solution to the ever-highest demands of these applications. This paper gives the requirements of both the above mentioned applications and the similarities and differences between these two kinds of optical systems. Finally, a design example of off-axis reflective optics with wide field of view is presented and described.

  10. Third-order nonlinear optical properties of acid green 25 dye by Z-scan method

    Science.gov (United States)

    Jeyaram, S.; Geethakrishnan, T.

    2017-03-01

    Third-order nonlinear optical (NLO) properties of aqueous solutions of an anthraquinone dye (Acid green 25 dye, color index: 61570) have been studied by Z-scan method with a 5 mW continuous wave (CW) diode laser operating at 635 nm. The nonlinear refractive index (n2) and the absorption coefficient (β) have been evaluated respectively from the closed and open aperture Z-scan data and the values of these parameters are found to increase with increase in concentration of the dye solution. The negative sign of the observed nonlinear refractive index (n2) indicates that the aqueous solution of acid green 25 dye exhibits self-defocusing type optical nonlinearity. The mechanism of the observed nonlinear absorption (NLA) and nonlinear refraction (NLR) is attributed respectively to reverse saturable absorption (RSA) and thermal nonlinear effects. The magnitudes of n2 and β are found to be of the order of 10-7 cm2/W and 10-3 cm/W respectively. With these experimental results, the authors suggest that acid green 25 dye may have potential applications in nonlinear optics.

  11. Super-resolution imaging in optical scanning holography using structured illumination

    Science.gov (United States)

    Ren, Zhenbo; Lam, Edmund Y.

    2016-10-01

    As a specific digital holographic microscopy system, optical scanning holography (OSH) is an appealing technique that makes use of the advantages of holography in the application of optical microscopy. In OSH system, a three-dimensional object is scanned with a Fresnel zone plate in a raster fashion, and the electrical signals are demodulated into a complex hologram by heterodyne detection. Then the recorded light wavefront information contained in the hologram allows one to digitally reconstruct the specimen for multiple purposes such as optical sectioning, extended focused imaging as well as three-dimensional imaging. According to Abbe criterion, however, akin to those conventional microscopic imaging systems, OSH suffers from limited resolving power due to the finite sizes of the objective lens and the aperture, i.e., low numerical aperture. To bypass the diffraction barrier in light microscopy, various super-resolution imaging techniques have been proposed. Among those methods, structured illumination is an ensemble imaging concept that modulates the spatial frequency by projecting additional well-defined patterns with different orientation and phase shift onto the specimen. Computational algorithms are then applied to remove the effect of the structure and to reconstruct a super-resolved image beyond the diffraction-limit. In this paper, we introduce this technique in OSH system to scale down the spatial resolution beyond the diffraction limit. The performance of the proposed method is validated by simulation and experimental results.

  12. Historical review and future trends of scanning optical systems for laser-beam printers

    Science.gov (United States)

    Minoura, Kazuo

    1993-12-01

    Flying spot scanning technologies providing a constant velocity were presented in 1963 and in 1969, although the concept of `f-0' was not yet explained definitely. After the middle of the 1970s, laser diodes became worthy of notice and a compact-sized laser beam printer was developed. Along with that development, the `f-0 lens' was defined based on the optical design theory in 1979 and also popular-type `f-0 lenses' were developed through the analytical design method. On the other hand, the author and colleagues worked out the best way of enabling metal light deflectors to apply in a popular-type system in 1984; which means the optical system of `deflection error compensation' with the simple composition including a toric lens. The epoch-making optical system raised the productivity of laser beam printers and also has been providing high-definition image printing. As for recent trends, low-priced and compact- sized printers are expanding their share of the market. The author predicts that future laser scanning technologies will be focused in low-priced and process-simplified printers looking closely into high-definition image quality.

  13. Cone structure imaged with adaptive optics scanning laser ophthalmoscopy in eyes with nonneovascular age-related macular degeneration

    National Research Council Canada - National Science Library

    Zayit-Soudry, Shiri; Duncan, Jacque L; Syed, Reema; Menghini, Moreno; Roorda, Austin J

    2013-01-01

    To evaluate cone spacing using adaptive optics scanning laser ophthalmoscopy (AOSLO) in eyes with nonneovascular AMD, and to correlate progression of AOSLO-derived cone measures with standard measures of macular structure...

  14. Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives

    Science.gov (United States)

    Duma, V.-F.; Demian, D.; Sinescu, C.; Cernat, R.; Dobre, G.; Negrutiu, M. L.; Topala, F. I.; Hutiu, Gh.; Bradu, A.; Podoleanu, A. G.

    2016-03-01

    We present the handheld scanning probes that we have recently developed in our current project for biomedical imaging in general and for Optical Coherence Tomography (OCT) in particular. OCT is an established, but dynamic imagistic technique based on laser interferometry, which offers micrometer resolutions and millimeters penetration depths. With regard to existing devices, the newly developed handheld probes are simple, light and relatively low cost. Their design is described in detail to allow for the reproduction in any lab, including for educational purposes. Two probes are constructed almost entirely from off-the-shelf components, while a third, final variant is constructed with dedicated components, in an ergonomic design. The handheld probes have uni-dimensional (1D) galvanometer scanners therefore they achieve transversal sections through the biological sample investigated - in contrast to handheld probes equipped with bi-dimensional (2D) scanners that can also achieve volumetric (3D) reconstructions of the samples. These latter handheld probes are therefore also discussed, as well as the possibility to equip them with galvanometer 2D scanners or with Risley prisms. For galvanometer scanners the optimal scanning functions studied in a series of previous works are pointed out; these functions offer a higher temporal efficiency/duty cycle of the scanning process, as well as artifact-free OCT images. The testing of the handheld scanning probes in dental applications is presented, for metal ceramic prosthesis and for teeth.

  15. Three-dimensional microscopy and sectional image reconstruction using optical scanning holography.

    Science.gov (United States)

    Lam, Edmund Y; Zhang, Xin; Vo, Huy; Poon, Ting-Chung; Indebetouw, Guy

    2009-12-01

    Fast acquisition and high axial resolution are two primary requirements for three-dimensional microscopy. However, they are sometimes conflicting: imaging modalities such as confocal imaging can deliver superior resolution at the expense of sequential acquisition at different axial planes, which is a time-consuming process. Optical scanning holography (OSH) promises to deliver a good trade-off between these two goals. With just a single scan, we can capture the entire three-dimensional volume in a digital hologram; the data can then be processed to obtain the individual sections. An accurate modeling of the imaging system is key to devising an appropriate image reconstruction algorithm, especially for real data where random noise and other imaging imperfections must be taken into account. In this paper we demonstrate sectional image reconstruction by applying an inverse imaging sectioning technique to experimental OSH data of biological specimens and visualizing the sections using the OSA Interactive Science Publishing software.

  16. Classification of human retinal microaneurysms using adaptive optics scanning light ophthalmoscope fluorescein angiography.

    Science.gov (United States)

    Dubow, Michael; Pinhas, Alexander; Shah, Nishit; Cooper, Robert F; Gan, Alexander; Gentile, Ronald C; Hendrix, Vernon; Sulai, Yusufu N; Carroll, Joseph; Chui, Toco Y P; Walsh, Joseph B; Weitz, Rishard; Dubra, Alfredo; Rosen, Richard B

    2014-03-04

    Microaneurysms (MAs) are considered a hallmark of retinal vascular disease, yet what little is known about them is mostly based upon histology, not clinical observation. Here, we use the recently developed adaptive optics scanning light ophthalmoscope (AOSLO) fluorescein angiography (FA) to image human MAs in vivo and to expand on previously described MA morphologic classification schemes. Patients with vascular retinopathies (diabetic, hypertensive, and branch and central retinal vein occlusion) were imaged with reflectance AOSLO and AOSLO FA. Ninety-three MAs, from 14 eyes, were imaged and classified according to appearance into six morphologic groups: focal bulge, saccular, fusiform, mixed, pedunculated, and irregular. The MA perimeter, area, and feret maximum and minimum were correlated to morphology and retinal pathology. Select MAs were imaged longitudinally in two eyes. Adaptive optics scanning light ophthalmoscope fluorescein angiography imaging revealed microscopic features of MAs not appreciated on conventional images. Saccular MAs were most prevalent (47%). No association was found between the type of retinal pathology and MA morphology (P = 0.44). Pedunculated and irregular MAs were among the largest MAs with average areas of 4188 and 4116 μm(2), respectively. Focal hypofluorescent regions were noted in 30% of MAs and were more likely to be associated with larger MAs (3086 vs. 1448 μm(2), P = 0.0001). Retinal MAs can be classified in vivo into six different morphologic types, according to the geometry of their two-dimensional (2D) en face view. Adaptive optics scanning light ophthalmoscope fluorescein angiography imaging of MAs offers the possibility of studying microvascular change on a histologic scale, which may help our understanding of disease progression and treatment response.

  17. Quantitative measurement of ultrasound pressure field by optical phase contrast method and acoustic holography

    Science.gov (United States)

    Oyama, Seiji; Yasuda, Jun; Hanayama, Hiroki; Yoshizawa, Shin; Umemura, Shin-ichiro

    2016-07-01

    A fast and accurate measurement of an ultrasound field with various exposure sequences is necessary to ensure the efficacy and safety of various ultrasound applications in medicine. The most common method used to measure an ultrasound pressure field, that is, hydrophone scanning, requires a long scanning time and potentially disturbs the field. This may limit the efficiency of developing applications of ultrasound. In this study, an optical phase contrast method enabling fast and noninterfering measurements is proposed. In this method, the modulated phase of light caused by the focused ultrasound pressure field is measured. Then, a computed tomography (CT) algorithm used to quantitatively reconstruct a three-dimensional (3D) pressure field is applied. For a high-intensity focused ultrasound field, a new approach that combines the optical phase contrast method and acoustic holography was attempted. First, the optical measurement of focused ultrasound was rapidly performed over the field near a transducer. Second, the nonlinear propagation of the measured ultrasound was simulated. The result of the new approach agreed well with that of the measurement using a hydrophone and was improved from that of the phase contrast method alone with phase unwrapping.

  18. Multimodal swept-source spectrally encoded scanning laser ophthalmoscopy and optical coherence tomography at 400 kHz

    Science.gov (United States)

    El-Haddad, Mohamed T.; Joos, Karen M.; Patel, Shriji N.; Tao, Yuankai K.

    2017-02-01

    Multimodal imaging systems that combine scanning laser ophthalmoscopy (SLO) and optical coherence tomography (OCT) have demonstrated the utility of concurrent en face and volumetric imaging for aiming, eye tracking, bulk motion compensation, mosaicking, and contrast enhancement. However, this additional functionality trades off with increased system complexity and cost because both SLO and OCT generally require dedicated light sources, galvanometer scanners, relay and imaging optics, detectors, and control and digitization electronics. We previously demonstrated multimodal ophthalmic imaging using swept-source spectrally encoded SLO and OCT (SS-SESLO-OCT). Here, we present system enhancements and a new optical design that increase our SS-SESLO-OCT data throughput by >7x and field-of-view (FOV) by >4x. A 200 kHz 1060 nm Axsun swept-source was optically buffered to 400 kHz sweep-rate, and SESLO and OCT were simultaneously digitized on dual input channels of a 4 GS/s digitizer at 1.2 GS/s per channel using a custom k-clock. We show in vivo human imaging of the anterior segment out to the limbus and retinal fundus over a >40° FOV. In addition, nine overlapping volumetric SS-SESLO-OCT volumes were acquired under video-rate SESLO preview and guidance. In post-processing, all nine SESLO images and en face projections of the corresponding OCT volumes were mosaicked to show widefield multimodal fundus imaging with a >80° FOV. Concurrent multimodal SS-SESLO-OCT may have applications in clinical diagnostic imaging by enabling aiming, image registration, and multi-field mosaicking and benefit intraoperative imaging by allowing for real-time surgical feedback, instrument tracking, and overlays of computationally extracted image-based surrogate biomarkers of disease.

  19. High-resolution adaptive optics scanning laser ophthalmoscope with multiple deformable mirrors

    Science.gov (United States)

    Chen, Diana C.; Olivier, Scot S.; Jones; Steven M.

    2010-02-23

    An adaptive optics scanning laser ophthalmoscopes is introduced to produce non-invasive views of the human retina. The use of dual deformable mirrors improved the dynamic range for correction of the wavefront aberrations compared with the use of the MEMS mirror alone, and improved the quality of the wavefront correction compared with the use of the bimorph mirror alone. The large-stroke bimorph deformable mirror improved the capability for axial sectioning with the confocal imaging system by providing an easier way to move the focus axially through different layers of the retina.

  20. Non-common path aberration correction in an adaptive optics scanning ophthalmoscope.

    Science.gov (United States)

    Sulai, Yusufu N; Dubra, Alfredo

    2014-09-01

    The correction of non-common path aberrations (NCPAs) between the imaging and wavefront sensing channel in a confocal scanning adaptive optics ophthalmoscope is demonstrated. NCPA correction is achieved by maximizing an image sharpness metric while the confocal detection aperture is temporarily removed, effectively minimizing the monochromatic aberrations in the illumination path of the imaging channel. Comparison of NCPA estimated using zonal and modal orthogonal wavefront corrector bases provided wavefronts that differ by ~λ/20 in root-mean-squared (~λ/30 standard deviation). Sequential insertion of a cylindrical lens in the illumination and light collection paths of the imaging channel was used to compare image resolution after changing the wavefront correction to maximize image sharpness and intensity metrics. Finally, the NCPA correction was incorporated into the closed-loop adaptive optics control by biasing the wavefront sensor signals without reducing its bandwidth.

  1. Non-Linear Optical Flow Cytometry Using a Scanned, Bessel Beam Light-Sheet

    Science.gov (United States)

    Collier, Bradley B.; Awasthi, Samir; Lieu, Deborah K.; Chan, James W.

    2015-01-01

    Modern flow cytometry instruments have become vital tools for high-throughput analysis of single cells. However, as issues with the cellular labeling techniques often used in flow cytometry have become more of a concern, the development of label-free modalities for cellular analysis is increasingly desired. Non-linear optical phenomena (NLO) are of growing interest for label-free analysis because of the ability to measure the intrinsic optical response of biomolecules found in cells. We demonstrate that a light-sheet consisting of a scanned Bessel beam is an optimal excitation geometry for efficiently generating NLO signals in a microfluidic environment. The balance of photon density and cross-sectional area provided by the light-sheet allowed significantly larger two-photon fluorescence intensities to be measured in a model polystyrene microparticle system compared to measurements made using other excitation focal geometries, including a relaxed Gaussian excitation beam often used in conventional flow cytometers. PMID:26021750

  2. Initial experience with optical-CT scanning of RadBall Dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Oldham, M; Clift, C; Thomas, A; Farfan, E; Foley, T; Jannik, T; Adamovics, J; Holmes, C; Stanley, S, E-mail: Mark.Oldham@Duke.ed

    2010-11-01

    The RadBall dosimeter is a novel device for providing 3-D information on the magnitude and distribution of contaminant sources of unknown radiation in a given hot cell, glovebox, or contaminated room. The device is presently under evaluation by the National Nuclear Lab (NNL, UK) and the Savannah River National Laboratory (SRNL, US), for application as a diagnostic device for such unknown contaminants in the nuclear industry. A critical component of the technique is imaging the dose distribution recorded in the RadBall using optical-CT scanning. Here we present our initial investigations using the Duke Mid-sized Optical-CT Scanner (DMOS) to image dose distributions deposited in RadBalls exposed to a variety of radiation treatments.

  3. Mapping Nanoscale Electromagnetic Near-Field Distributions Using Optical Forces

    CERN Document Server

    Huang, Fei; Mardy, Zahra; Burdett, Jonathan; Wickramasinghe, H Kumar

    2014-01-01

    We demonstrate the application of Atomic Force Microscopy (AFM) based optical force microscopy to map the optical near-fields with nanometer resolution, limited only by the AFM probe geometry. We map the electric field distributions of tightly focused laser beams with different polarizations and show that the experimentally measured data agrees well with the theoretical predictions from a dipole-dipole interaction model, thereby validating our approach. We further validate the proposed technique by evaluating the optical electric field scattered by a spherical nanoparticle by measuring the optical forces between the nanoparticle and gold coated AFM probe. The technique allows for wavelength independent, background free, thermal noise limited mechanical imaging of optical phenomenon with sensitivity limited by AFM performance. Optical forces due to both electric and magnetic dipole-dipole interactions can be measured using this technique.

  4. Real-time near-field terahertz imaging with atomic optical fluorescence

    Science.gov (United States)

    Wade, C. G.; Šibalić, N.; de Melo, N. R.; Kondo, J. M.; Adams, C. S.; Weatherill, K. J.

    2017-01-01

    Terahertz (THz) near-field imaging is a flourishing discipline, with applications from fundamental studies of beam propagation to the characterization of metamaterials and waveguides. Beating the diffraction limit typically involves rastering structures or detectors with length scale shorter than the radiation wavelength; in the THz domain this has been achieved using a number of techniques including scattering tips and apertures. Alternatively, mapping THz fields onto an optical wavelength and imaging the visible light removes the requirement for scanning a local probe, speeding up image collection times. Here, we report THz-to-optical conversion using a gas of highly excited Rydberg atoms. By collecting THz-induced optical fluorescence we demonstrate a real-time image of a THz standing wave and use well-known atomic properties to calibrate the THz field strength.

  5. Computer-aided design provisionalization and implant insertion combined with optical scanning of plaster casts and computed tomography data

    Science.gov (United States)

    Hara, Shingo; Mitsugi, Masaharu; Kanno, Takahiro; Tatemoto, Yukihiro

    2014-01-01

    The conventional implant prosthesis planning process currently involves confirmation of two-dimensional anatomical findings or the quantity and quality of bones using panoramic X-ray images. The introduction of computed tomography (CT) into the field has enabled the previously impossible confirmation of three-dimensional findings, making implant planning in precise locations possible. However, artifacts caused by the presence of metal prostheses can become problematic and can result in obstacles to diagnosis and implant planning. The most updated version of SimPlant® Pro has made it possible to integrate plaster cast images with CT data using optical scanning. Using this function, the obstacles created by metal prostheses are eliminated, facilitating implant planning at the actual intraoral location. Furthermore, a SurgiGuide® based on individual patient information can be created on plaster casts, resulting in easier and more precise implant insertion. PMID:24987602

  6. High-speed adaptive optics line scan confocal retinal imaging for human eye

    Science.gov (United States)

    Wang, Xiaolin; Zhang, Yuhua

    2017-01-01

    Purpose Continuous and rapid eye movement causes significant intraframe distortion in adaptive optics high resolution retinal imaging. To minimize this artifact, we developed a high speed adaptive optics line scan confocal retinal imaging system. Methods A high speed line camera was employed to acquire retinal image and custom adaptive optics was developed to compensate the wave aberration of the human eye’s optics. The spatial resolution and signal to noise ratio were assessed in model eye and in living human eye. The improvement of imaging fidelity was estimated by reduction of intra-frame distortion of retinal images acquired in the living human eyes with frame rates at 30 frames/second (FPS), 100 FPS, and 200 FPS. Results The device produced retinal image with cellular level resolution at 200 FPS with a digitization of 512×512 pixels/frame in the living human eye. Cone photoreceptors in the central fovea and rod photoreceptors near the fovea were resolved in three human subjects in normal chorioretinal health. Compared with retinal images acquired at 30 FPS, the intra-frame distortion in images taken at 200 FPS was reduced by 50.9% to 79.7%. Conclusions We demonstrated the feasibility of acquiring high resolution retinal images in the living human eye at a speed that minimizes retinal motion artifact. This device may facilitate research involving subjects with nystagmus or unsteady fixation due to central vision loss. PMID:28257458

  7. High-speed adaptive optics line scan confocal retinal imaging for human eye.

    Science.gov (United States)

    Lu, Jing; Gu, Boyu; Wang, Xiaolin; Zhang, Yuhua

    2017-01-01

    Continuous and rapid eye movement causes significant intraframe distortion in adaptive optics high resolution retinal imaging. To minimize this artifact, we developed a high speed adaptive optics line scan confocal retinal imaging system. A high speed line camera was employed to acquire retinal image and custom adaptive optics was developed to compensate the wave aberration of the human eye's optics. The spatial resolution and signal to noise ratio were assessed in model eye and in living human eye. The improvement of imaging fidelity was estimated by reduction of intra-frame distortion of retinal images acquired in the living human eyes with frame rates at 30 frames/second (FPS), 100 FPS, and 200 FPS. The device produced retinal image with cellular level resolution at 200 FPS with a digitization of 512×512 pixels/frame in the living human eye. Cone photoreceptors in the central fovea and rod photoreceptors near the fovea were resolved in three human subjects in normal chorioretinal health. Compared with retinal images acquired at 30 FPS, the intra-frame distortion in images taken at 200 FPS was reduced by 50.9% to 79.7%. We demonstrated the feasibility of acquiring high resolution retinal images in the living human eye at a speed that minimizes retinal motion artifact. This device may facilitate research involving subjects with nystagmus or unsteady fixation due to central vision loss.

  8. Design and testing of prototype handheld scanning probes for optical coherence tomography.

    Science.gov (United States)

    Demian, Dorin; Duma, Virgil-Florin; Sinescu, Cosmin; Negrutiu, Meda Lavinia; Cernat, Ramona; Topala, Florin Ionel; Hutiu, Gheorghe; Bradu, Adrian; Podoleanu, Adrian Gh

    2014-08-01

    Three simple and low-cost configurations of handheld scanning probes for optical coherence tomography have been developed. Their design and testing for dentistry applications are presented. The first two configurations were built exclusively from available off-the-shelf optomechanical components, which, to the best of our knowledge, are the first designs of this type. The third configuration includes these components in an optimized and ergonomic probe. All the designs are presented in detail to allow for their duplication in any laboratory with a minimum effort, for applications that range from educational to high-end clinical investigations. Requirements that have to be fulfilled to achieve configurations which are reliable, ergonomic-for clinical environments, and easy to build are presented. While a range of applications is possible for the prototypes developed, in this study the handheld probes are tested ex vivo with a spectral domain optical coherence tomography system built in-house, for dental constructs. A previous testing with a swept source optical coherence tomography system has also been performed both in vivo and ex vivo for ear, nose, and throat-in a medical environment. The applications use the capability of optical coherence tomography to achieve real-time, high-resolution, non-contact, and non-destructive interferometric investigations with micrometer resolutions and millimeter penetration depth inside the sample. In this study, testing the quality of the material of one of the most used types of dental prosthesis, metalo-ceramic is thus demonstrated. © IMechE 2014.

  9. MO-F-CAMPUS-T-04: Utilization of Optical Dosimeter for Modulated Spot-Scanning Particle Beam

    Energy Technology Data Exchange (ETDEWEB)

    Hsi, W; Li, Y; Huang, Z; Sheng, Y; Deng, Y; Zhao, J; Zhao, F; Sun, L; Moyers, M [Shanghai Proton and Heavy Ion Center, Pudong, Shangai (China)

    2015-06-15

    Purpose: To present the utilization of an optical dosimeter for modulated spot-scanning carbon-ion and proton beams during the acceptance test of Siemens IONTRIS system. Method and Materials: An optical dosimeter using phosphor scintillation was developed to map and interactively analyze the shapes and sizes of spots over 190 energies for ProTom modulated-scanning system. The dose response to proton had been characterized with proper pixel calibration at ProTom system. The dose response was further studied at 0.7 cm depths by uniform 8cm in-diameter fields of 424.89 MeV/u (E290) carbon-ions and 215.18MeV (E282) protons at IONTRIS system. The virtual source axial distances (vSAD) of carbonions and protons of IONTRIS system was investigated by measuring either variations of spot position or field size at five different locations to Isocenter. By measuring lateral profiles of uniform doses with varied thin-thicknesses of chest-board pattern and placing the scintillation plate at near to the distal edge, range variations at different off-axis-distances (rOAD) were examined. Relative accuracy and reproducibility of beam range were measured for three beam ranges with a ramping block at front of scintillation plate. Results: Similar dose response was observed for high energies of carbon ions and protons. Mean vSAD at X and Y axes were 744.1 cm and 807.4cm with deviation of 7.4cm and 7.7cm, respectively. Variation of rOAD was within 0.35 mm over 10cm for both protons and carbon ions. Accuracy of measuring relative distal range using the ramping block was 0.2mm. Measured range over repeated three times for each range were within 0.25mm at same room, and within 1.0mm between four rooms. Conclusions: The optical dosimeter could efficiently measure the virtual source distance. And, to measure small range variation at different off-axial locations, and for the relative beam range between rooms during acceptance test of a modulated spot-scanning particle system.

  10. All-Optical Field-Induced Second-Harmonic Generation

    CERN Document Server

    Davidson, Roderick B; Ziegler, Jed I; Avanesyan, Sergey M; Lawrie, Ben J; Haglund, Richard F

    2015-01-01

    Efficient frequency modulation techniques are crucial to the development of plasmonic metasurfaces for information processing and energy conversion. Nanoscale electric-field confinement in optically pumped plasmonic structures enables stronger nonlinear susceptibilities than are attainable in bulk materials. The interaction of three distinct electric fields in (chi)^3 optical processes allows for all-optical modulation of nonlinear signals. Here we demonstrate effcient third-order second harmonic generation (SHG) in a serrated nanogap plasmonic geometry that generates steep electric field gradients within a dielectric material. We utilize an ultrafast optical pump to control the plasmonically induced electric-fields and to generate bandwidth-limited ultrafast second-harmonic pulses driven by the control pulses. The combination of plasmonic metasurfaces with all-optical control and the freedom to choose the dielectric allow multiple generalizations of this concept and geometry to other four-wave mixing process...

  11. Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Peng; Behan, Gavin; Kirkland, Angus I. [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Nellist, Peter D., E-mail: peter.nellist@materials.ox.ac.uk [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Cosgriff, Eireann C.; D' Alfonso, Adrian J.; Morgan, Andrew J.; Allen, Leslie J. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Hashimoto, Ayako [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); Takeguchi, Masaki [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); High Voltage Electron Microscopy Station, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Mitsuishi, Kazutaka [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); Quantum Dot Research Center, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Shimojo, Masayuki [High Voltage Electron Microscopy Station, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Advanced Science Research Laboratory, Saitama Institute of Technology, 1690 Fusaiji, Fukaya 369-0293 (Japan)

    2011-06-15

    Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored. -- Research Highlights: {yields} The confocal probe image in a scanning confocal electron microscopy image reveals information about the thickness and height of the crystalline layer. {yields} The form of the contrast in a three-dimensional bright-field scanning confocal electron microscopy image can be explained in terms of the confocal probe image. {yields} Despite the complicated form of the contrast in bright-field scanning confocal electron microscopy, we see that depth information is transferred on a 10 nm scale.

  12. Integration of 3D anatomical data obtained by CT imaging and 3D optical scanning for computer aided implant surgery

    Directory of Open Access Journals (Sweden)

    Paoli Alessandro

    2011-02-01

    Full Text Available Abstract Background A precise placement of dental implants is a crucial step to optimize both prosthetic aspects and functional constraints. In this context, the use of virtual guiding systems has been recognized as a fundamental tool to control the ideal implant position. In particular, complex periodontal surgeries can be performed using preoperative planning based on CT data. The critical point of the procedure relies on the lack of accuracy in transferring CT planning information to surgical field through custom-made stereo-lithographic surgical guides. Methods In this work, a novel methodology is proposed for monitoring loss of accuracy in transferring CT dental information into periodontal surgical field. The methodology is based on integrating 3D data of anatomical (impression and cast and preoperative (radiographic template models, obtained by both CT and optical scanning processes. Results A clinical case, relative to a fully edentulous jaw patient, has been used as test case to assess the accuracy of the various steps concurring in manufacturing surgical guides. In particular, a surgical guide has been designed to place implants in the bone structure of the patient. The analysis of the results has allowed the clinician to monitor all the errors, which have been occurring step by step manufacturing the physical templates. Conclusions The use of an optical scanner, which has a higher resolution and accuracy than CT scanning, has demonstrated to be a valid support to control the precision of the various physical models adopted and to point out possible error sources. A case study regarding a fully edentulous patient has confirmed the feasibility of the proposed methodology.

  13. Towards an optical far-field measurement of higher-order multipole contributions to the scattering response of nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Thomas; Orlov, Sergej [Max Planck Institute for the Science of Light, Guenther-Scharowsky-Str. 1/Bldg. 24, 91058 Erlangen (Germany); Institute of Optics, Information and Photonics, University Erlangen-Nuremberg, Staudtstr. 7/B2, 91058 Erlangen (Germany); Leuchs, Gerd; Banzer, Peter, E-mail: peter.banzer@mpl.mpg.de [Max Planck Institute for the Science of Light, Guenther-Scharowsky-Str. 1/Bldg. 24, 91058 Erlangen (Germany); Institute of Optics, Information and Photonics, University Erlangen-Nuremberg, Staudtstr. 7/B2, 91058 Erlangen (Germany); Department of Physics, University of Ottawa, 25 Templeton St., Ottawa, Ontario K1N 6N5 (Canada)

    2015-03-02

    We experimentally show an all-optical multipolar decomposition of the lowest-order eigenmodes of a single gold nanoprism using azimuthally and radially polarized cylindrical vector beams. By scanning the particle through these tailored field distributions, the multipolar character of the eigenmodes gets encoded into 2D-scanning intensity maps even for higher-order contributions to the eigenmode that are too weak to be discerned in the direct far-field scattering response. This method enables a detailed optical mode analysis of individual nanoparticles.

  14. Towards an optical far-field measurement of higher-order multipole contributions to the scattering response of nanoparticles

    CERN Document Server

    Bauer, Thomas; Leuchs, Gerd; Banzer, Peter

    2014-01-01

    We experimentally show an all-optical multipolar decomposition of the lowest-order Eigenmodes of a single gold nanoprism using azimuthally and radially polarized cylindrical vector beams. By scanning the particle through these tailored field distributions, the multipolar character of the Eigenmodes gets encoded into 2D-scanning intensity maps even for higher-order contributions to the Eigenmode that are too weak to be discerned in the direct far-field scattering response. This method enables a detailed optical mode analysis of individual nanoparticles.

  15. Coherent feedback control of multipartite quantum entanglement for optical fields

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Zhihui; Jia, Xiaojun; Xie, Changde; Peng, Kunchi [State Key Laboratory of Quantum Optics and Quantum Optics Devices, Institute of Opto-Electronics, Shanxi University, Taiyuan, 030006 (China)

    2011-12-15

    Coherent feedback control (CFC) of multipartite optical entangled states produced by a nondegenerate optical parametric amplifier is theoretically studied. The features of the quantum correlations of amplitude and phase quadratures among more than two entangled optical modes can be controlled by tuning the transmissivity of the optical beam splitter in the CFC loop. The physical conditions to enhance continuous variable multipartite entanglement of optical fields utilizing the CFC loop are obtained. The numeric calculations based on feasible physical parameters of realistic systems provide direct references for the design of experimental devices.

  16. Near-field optical study of 3rd order nonlinear properties of amorphous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yun Jin; Park, J.H.; Kim, M.R.; Jhe, Won Ho [Seoul National University, Seoul (Korea, Republic of); Rhee, B.K. [Sogang University, Seoul (Korea, Republic of)

    1999-07-01

    The 3rd order nonlinear properties show optical bleaching (Saturation) and Reverse saturation in absorption aspect, whereas self-focusing and self-defocusing in refraction aspect. Optical bleaching and self-focusing phenomena of those properties in particular can be useful to make the optical beam spot size smaller for application on the higher optical storage density. In this experiment, amorphous silicon layer is used to investigate the effect of 3rd order nonlinear material(1) on the spot size. The amorphous silicon (A-Si) layer is deposited by the method of PECVD on the corning 1737 fusion glass and its thickness is 300 nm. Two experiments are carried out in this work. One is the far-field Z-Scan and the other is the near-field Z-scan where the laser beam spot is scanned by NSOM in the near field region of the material. The former is for investigating the general 3rd order nonlinear properties of amorphous silicon and the latter is for measuring the change of the beam spot size directly. The far-field Z-scan shows Reverse saturation (Im{chi}{sup (3)} {approx} 8 X 10{sup -3} esu) and self-focusing (Re{chi}{sup (3)} {approx} 2 X 10{sup -2} esu) properties for the A-Si layer. In the second experiment, we present the change the beam spot size as a function of the input beam intensity for the A-Si layer. As a result, we find that the stronger the input beam intensity is, the smaller a beam spot size is obtained for A-Si layer. (author)

  17. Multimodal imaging of the human temporal bone: A comparison of CT and optical scanning techniques

    Science.gov (United States)

    Voie, Arne H.; Whiting, Bruce; Skinner, Margaret; Neely, J. Gail; Lee, Kenneth; Holden, Tim; Brunsden, Barry

    2003-10-01

    A collaborative effort between Washington University in St. Louis and Spencer Technologies in Seattle, WA has been undertaken to create a multimodal 3D reconstruction of the human cochlea and vestibular system. The goal of this project is to improve the accuracy of in vivo CT reconstructions of implanted cochleae, and to expand the knowledge of high-resolution anatomical detail provided by orthogonal-plane optical sectioning (OPFOS). At WUSL, computed tomography (CT) images of the cochlea are used to determine the position of cochlear implant electrodes relative to target auditory neurons. The cochlear implant position is determined using pre- and post-operative CT scans. The CT volumes are cross-registered to align the semicircular canals and internal auditory canal, which have a unique configuration in 3-D space. The head of a human body donor was scanned with a clinical CT device, after which the temporal bones were removed, fixed in formalin and trimmed prior to scanning with a laboratory Micro CT scanner. Following CT, the temporal bones were sent to the OPFOS Imaging Lab at Spencer Technologies for a further analysis. 3-D reconstructions of CT and OPFOS imaging modalities were compared, and results are presented. [Work supported by NIDCD Grants R44-03623-5 and R01-00581-13.

  18. Optical waveguide mode control by nanoslit-enhanced terahertz field

    DEFF Research Database (Denmark)

    Novitsky, Andrey; Zalkovskij, Maksim; Malureanu, Radu

    2012-01-01

    In this Letter we propose a scheme providing control over an optical waveguide mode by a terahertz (THz) wave. The scheme is based on an optimization of the overlap between the optical waveguide mode and the THz field, with the THz field strength enhanced by the presence of a metallic nanoslit...... surrounding the waveguide. We find an optimum balance between the optical mode attenuation and Kerr-induced change in the propagation constant. The criterion for a π/2-cumulative phase shift, for instance for application in a Mach–Zehnder interferometer configuration, requires 10  kV/cm THz field, which...

  19. Estimating of pulsed electric fields using optical measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, Timothy McGuire; Chantler, Gary.

    2013-09-01

    We performed optical electric field measurements ion nanosecond time scales using the electrooptic crystal beta barium borate (BBO). Tests were based on a preliminary bench top design intended to be a proofofprinciple stepping stone towards a modulardesign optical Efield diagnostic that has no metal in the interrogated environment. The long term goal is to field a modular version of the diagnostic in experiments on large scale xray source facilities, or similarly harsh environments.

  20. Three-dimensional phase-contrast X-ray microtomography with scanning-imaging X-ray microscope optics.

    Science.gov (United States)

    Takeuchi, Akihisa; Uesugi, Kentaro; Suzuki, Yoshio

    2013-09-01

    A three-dimensional (3D) X-ray tomographic micro-imaging system has been developed. The optical system is based on a scanning-imaging X-ray microscope (SIXM) optics, which is a hybrid system consisting of a scanning microscope optics with a one-dimensional (1D) focusing (line-focusing) device and an imaging microscope optics with a 1D objective. In the SIXM system, each 1D dataset of a two-dimensional (2D) image is recorded independently. An object is illuminated with a line-focused beam. Positional information of the region illuminated by the line-focused beam is recorded with the 1D imaging microscope optics as line-profile data. By scanning the object with the line focus, 2D image data are obtained. In the same manner as for a scanning microscope optics with a multi-pixel detector, imaging modes such as phase contrast and absorption contrast can be arbitrarily configured after the image data acquisition. By combining a tomographic scan method and the SIXM system, quantitative 3D imaging is performed. Results of a feasibility study of the SIXM for 3D imaging are shown.

  1. Mode field expansion in index-guiding microstructured optical fibers

    Science.gov (United States)

    Sharma, Dinesh Kumar; Sharma, Anurag

    2013-05-01

    The mode-field expander (MFE) is a microstructured optical fiber (MOF) based device that enlarges the modal field distribution and can couple light from large mode area (LMA) fibers into small core fibers or vice-versa and other optical waveguides. Using our earlier developed analytical field model, we studied the mode-field expansion in MOFs having triangular lattice, and low-loss splicing of MOFs to standard single-mode fibers (SMFs), based on the controlled all airhole collapse method, which leads to an optimum mode-field match at the joint interface of the MOF-SMF. Comparisons with available experimental and simulation results have also been included.

  2. Scanning near-field lithography with high precision flexure orientation stage control

    Science.gov (United States)

    Qin, Jin; Zhang, Liang; Tan, Haosen; Wang, Liang

    2017-09-01

    A new design of an orientation stage for scanning near-field lithography is presented based on flexure hinges. Employing flexure mechanisms in place of rigid-body mechanisms is one of the most promising techniques to efficiently implement high precision motion and avoid problems caused by friction. For near-field scanning lithography with evanescent wave, best resolution can be achieved in contact mode. However, if the mask is fixed on a rigid stage, contact friction will deteriorate the lithography surface. To reduce friction while maintaining good contact between the mask and the substrate, the mask should be held with high lateral stiffness and low torsion stiffness. This design can hold the mask in place during the scanning process and achieve passive alignment. Circular flexure hinges, whose parameters are determined by motion requirements based on Schotborgh's equation, are used as the basic unit of the stage to achieve passive alignment by compensating motions from elastic deformation. A finite-element analysis is performed to verify this property of the stage. With the aid of this stage, 21 nm resolution is achieved in static near-field lithography and 18 nm line-width in scanning near-field lithography.

  3. Sewer Lateral Electro Scan Field Verification Pilot (WERF Report INFR4R12)

    Science.gov (United States)

    Abstract:WERF selected a proposed research project to field test an emerging technology for inspecting sanitary sewer lateral pipes. The technology is called Electro Scan and is used to find defects in laterals that allow the infiltration of groundwater into the lateral. Electro ...

  4. Analysis of the measurement field of the optical klystron

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The measured fields of the optical klystron in NSRL (National Sychrotron Radiation Laboratory) are given, including the distribution on the axis, and the integrated field distribution. The harmonic magnet field and the spectra of the spontaneous emission are analyzed, and the multiple field is presented by fitting the diagram. The influence of the integrated field on the close orbit of the beam and on the operation parameters of the storage ring, and the compensation in the experiment are also discussed.

  5. Fiber optical magnetic field sensor for power generator monitoring

    Science.gov (United States)

    Willsch, Michael; Bosselmann, Thomas; Villnow, Michael

    2014-05-01

    Inside of large electrical engines such as power generators and large drives, extreme electric and magnetic fields can occur which cannot be measured electrically. Novel fiber optical magnetic field sensors are being used to characterize the fields and recognize inner faults of large power generators.

  6. Composite cavity based fiber optic Fabry Perot strain sensors demodulated by an unbalanced fiber optic Michelson interferometer with an electrical scanning mirror

    Science.gov (United States)

    Zhang, Jianzhong; Yang, Jun; Sun, Weimin; Jin, Wencai; Yuan, Libo; Peng, G. D.

    2008-08-01

    A composite cavity based fiber optic Fabry-Perot strain sensor system, interrogated by a white light source and demodulated by an unbalanced fiber optic Michelson interferometer with an electrical scanning mirror, is proposed and demonstrated. Comparing with the traditional extrinsic fiber optic Fabry-Perot strain sensor, the potential multiplexing capability and the dynamic measurement range are improved simultaneously. At the same time, the measurement stability of the electrical scanning mirror system is improved by the self-referenced signal of the sensor structure.

  7. Far-Field Pattern Reconstruction from Near-Field Data Collected via a Nonconventional Plane-Rectangular Scanning: Experimental Testing

    Directory of Open Access Journals (Sweden)

    Francesco D’Agostino

    2014-01-01

    Full Text Available This paper deals with the experimental validation of an efficient near-field-far-field (NF-FF transformation using the planar wide-mesh scanning (PWMS. Such a nonconventional plane-rectangular scanning technique is so named, since the sample grid is characterized by meshes wider and wider when going away from the center, and makes it possible to lower the number of needed measurements, as well as the time required for the data acquisition when dealing with quasi-planar antennas. It relies on the use of the nonredundant sampling representations of electromagnetic fields which employ an oblate ellipsoid or a surface formed by two circular “bowls” with the same aperture diameter but eventually different bending radii to shape a quasi-planar antenna. A two-dimensional optimal sampling interpolation formula allows the reconstruction of the NF data at any point on the measurement plane and, in particular, at those required by the classical NF-FF transformation with the conventional plane-rectangular scanning. The measurements, performed at the planar NF facility of the antenna characterization laboratories of Selex ES, have confirmed the effectiveness of this innovative scanning also from the experimental viewpoint.

  8. Near-field optically driven Brownian motors (Conference Presentation)

    Science.gov (United States)

    Wu, Shao-Hua; Huang, Ningfeng; Jaquay, Eric; Povinelli, Michelle L.

    2016-09-01

    Brownian ratchets are of fundamental interest in fields from statistical physics to molecular motors. The realization of Brownian ratchets in engineered systems opens up the potential to harness thermal energy for directed motion, with applications in transport and sorting of nanoparticles. Implementations based on optical traps provide a high degree of tunability along with precise spatiotemporal control. Near-field optical methods provide particular flexibility and ease of on-chip integration with other microfluidic components. Here, we demonstrate the first all-optical, near-field Brownian ratchet. Our approach uses an asymmetrically patterned photonic crystal and yields an ultra-stable trap stiffness of 253.6 pN/nm-W, 100x greater than conventional optical tweezers. By modulating the laser power, optical ratcheting with transport speed of 1 micron/s can be achieved, allowing a variety of dynamical lab-on-a-chip applications. The resulting transport speed matches well with the theoretical prediction.

  9. Optical fibers with composite magnetic coating for magnetic field sensing

    Energy Technology Data Exchange (ETDEWEB)

    Radojevic, V.; Nedeljkovic, D.; Talijan, N. E-mail: ntalijan@elab.tmf.bg.ac.yu; Trifunovic, D.; Aleksic, R

    2004-05-01

    The investigated system for optical fiber sensor was multi-mode optical fiber with magnetic composite coating. Polymer component of composite coating was poly (ethylene-co-vinyl acetate)-EVA, and the magnetic component was powder of SmCo{sub 5} permanent magnet in form of single domain particles. The influence of the applied external magnetic field on the change of intensity of the light signal propagated through optical fiber was investigated.

  10. Optical fibers with composite magnetic coating for magnetic field sensing

    Science.gov (United States)

    Radojevic, V.; Nedeljkovic, D.; Talijan, N.; Trifunovic, D.; Aleksic, R.

    2004-05-01

    The investigated system for optical fiber sensor was multi-mode optical fiber with magnetic composite coating. Polymer component of composite coating was poly (ethylene-co-vinyl acetate)-EVA, and the magnetic component was powder of SmCo5 permanent magnet in form of single domain particles. The influence of the applied external magnetic field on the change of intensity of the light signal propagated through optical fiber was investigated.

  11. Engineering Optical Antenna for Efficient Local Field Enhancement

    Science.gov (United States)

    2013-12-01

    spacing 10nm). In this dissertation, we theoretically derived the local field enhancement of the optical antenna and found that optimized radiation and...present a novel optical antenna design--the arch-dipole antenna--which has optimal radiation efficiency and small gap spacing (5 nm) fabricated by CMOS

  12. Photocurrent mapping of near-field optical antenna resonances.

    Science.gov (United States)

    Barnard, Edward S; Pala, Ragip A; Brongersma, Mark L

    2011-08-21

    An increasing number of photonics applications make use of nanoscale optical antennas that exhibit a strong, resonant interaction with photons of a specific frequency. The resonant properties of such antennas are conventionally characterized by far-field light-scattering techniques. However, many applications require quantitative knowledge of the near-field behaviour, and existing local field measurement techniques provide only relative, rather than absolute, data. Here, we demonstrate a photodetector platform that uses a silicon-on-insulator substrate to spectrally and spatially map the absolute values of enhanced fields near any type of optical antenna by transducing local electric fields into photocurrent. We are able to quantify the resonant optical and materials properties of nanoscale (∼50 nm) and wavelength-scale (∼1 µm) metallic antennas as well as high-refractive-index semiconductor antennas. The data agree well with light-scattering measurements, full-field simulations and intuitive resonator models.

  13. Comparative study of the retinal nerve fibre layer thickness performed with optical coherence tomography and GDx scanning laser polarimetry in patients with primary open-angle glaucoma.

    Science.gov (United States)

    Wasyluk, Jaromir T; Jankowska-Lech, Irmina; Terelak-Borys, Barbara; Grabska-Liberek, Iwona

    2012-03-01

    We compared the parameters of retinal nerve fibre layer in patients with advanced glaucoma with the use of different OCT (Optical Coherence Tomograph) devices in relation to analogical measurements performed with GDx VCC (Nerve Fiber Analyzer with Variable Corneal Compensation) scanning laser polarimetry. Study subjects had advanced primary open-angle glaucoma, previously treated conservatively, diagnosed and confirmed by additional examinations (visual field, ophthalmoscopy of optic nerve, gonioscopy), A total of 10 patients were enrolled (9 women and 1 man), aged 18-70 years of age. Nineteen eyes with advanced glaucomatous neuropathy were examined. 1) Performing a threshold perimetry Octopus, G2 strategy and ophthalmoscopy of optic nerve to confirm the presence of advanced primary open-angle glaucoma; 2) performing a GDx VCC scanning laser polarimetry of retinal nerve fibre layer; 3) measuring the retinal nerve fibre layer thickness with 3 different optical coherence tomographs. The parameters of the retinal nerve fibre layer thickness are highly correlated between the GDx and OCT Stratus and 3D OCT-1000 devices in mean retinal nerve fibre layer thickness, retinal nerve fibre layer thickness in the upper sector, and correlation of NFI (GDx) with mean retinal nerve fibre layer thickness in OCT examinations. Absolute values of the retinal nerve fibre layer thickness (measured in µm) differ significantly between GDx and all OCT devices. Examination with OCT devices is a sensitive diagnostic method of glaucoma, with good correlation with the results of GDx scanning laser polarimetry of the patients.

  14. Optical wavefront distortion due to supersonic flow fields

    Institute of Scientific and Technical Information of China (English)

    CHEN ZhiQiang; FU Song

    2009-01-01

    The optical wavefront distortion caused by a supersonic flow field around a half model of blunt nose cone was studied in a wind tunnel. A Shack-Hartmann wavefront sensor was used to measure the dis-totted optical wavefront. Interesting optical parameters including the peak variation (PV), root of mean square (RMS) and Strehl ratio were obtained under different test conditions during the experiment. During the establishing process of the flow field in the wind tunnel test section, the wavefront shape was unstable. However after the flow field reached the steady flow state, the wavefront shape kept sta-ble, and the relative error of wavefront aberration was found small. The Shack-Hartmann wavefront sensor developed was proved to be credible in measuring quantitatively the optical phase change of light traveling through the flow field around model window.

  15. Wide-field optical sectioning for live-tissue imaging by plane-projection multiphoton microscopy

    Science.gov (United States)

    Yu, Jiun-Yann; Kuo, Chun-Hung; Holland, Daniel B.; Chen, Yenyu; Ouyang, Mingxing; Blake, Geoffrey A.; Zadoyan, Ruben; Guo, Chin-Lin

    2011-11-01

    Optical sectioning provides three-dimensional (3D) information in biological tissues. However, most imaging techniques implemented with optical sectioning are either slow or deleterious to live tissues. Here, we present a simple design for wide-field multiphoton microscopy, which provides optical sectioning at a reasonable frame rate and with a biocompatible laser dosage. The underlying mechanism of optical sectioning is diffuser-based temporal focusing. Axial resolution comparable to confocal microscopy is theoretically derived and experimentally demonstrated. To achieve a reasonable frame rate without increasing the laser power, a low-repetition-rate ultrafast laser amplifier was used in our setup. A frame rate comparable to that of epifluorescence microscopy was demonstrated in the 3D imaging of fluorescent protein expressed in live epithelial cell clusters. In this report, our design displays the potential to be widely used for video-rate live-tissue and embryo imaging with axial resolution comparable to laser scanning microscopy.

  16. Far-field optical imaging with subdiffraction resolution enabled by nonlinear saturation absorption

    Science.gov (United States)

    Ding, Chenliang; Wei, Jingsong

    2016-01-01

    The resolution of far-field optical imaging is required to improve beyond the Abbe limit to the subdiffraction or even the nanoscale. In this work, inspired by scanning electronic microscopy (SEM) imaging, in which carbon (or Au) thin films are usually required to be coated on the sample surface before imaging to remove the charging effect while imaging by electrons. We propose a saturation-absorption-induced far-field super-resolution optical imaging method (SAI-SRIM). In the SAI-SRIM, the carbon (or Au) layers in SEM imaging are replaced by nonlinear-saturation-absorption (NSA) thin films, which are directly coated onto the sample surfaces using advanced thin film deposition techniques. The surface fluctuant morphologies are replicated to the NSA thin films, accordingly. The coated sample surfaces are then imaged using conventional laser scanning microscopy. Consequently, the imaging resolution is greatly improved, and subdiffraction-resolved optical images are obtained theoretically and experimentally. The SAI-SRIM provides an effective and easy way to achieve far-field super-resolution optical imaging for sample surfaces with geometric fluctuant morphology characteristics.

  17. Tunable resonance cavity control in a near-field scanning microwave microscope

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Hyuk; Kim, Joo Young; Lee, Kre Jin [Sogang Univ., Seoul (Korea, Republic of); Kim, Jin Tae [KRISS, Daejon (Korea, Republic of); Cha, Deok Joon [Kunsan National Univ., Kunsan (Korea, Republic of); Lee, Yong San [Daejin Univ., Pochon (Korea, Republic of)

    2002-05-01

    We report a microwave surface imaging technique using a near-field scanning microwave microscope with a tunable resonance cavity. By tuning the resonance cavity, we could demonstrate improved sensitivity and spatial resolution of the near-field image of YBa{sub 2}Cu{sub 3}O{sub y} thin films on MgO substrates. By measuring the shift in the resonant frequency and the change in the quality factor, we obtained near-field scanning microwave images with a spatial resolution better than 4 {mu}m at an operating frequency of f=1-1.5 GHz. The principal of operation can be explained by using the perturbation theory of a coaxial resonant cavity, considering the radius of the probe tip and the sample-tip distance.

  18. Reducing field distortion for galvanometer scanning system using a vision system

    Science.gov (United States)

    Ortega Delgado, Moises Alberto; Lasagni, Andrés Fabián

    2016-11-01

    Laser galvanometer scanning systems are well-established devices for material processing, medical imaging and laser projection. Besides all the advantages of these devices like high resolution, repeatability and processing velocity, they are always affected by field distortions. Different pre-compensating techniques using iterative marking and measuring methods are applied in order to reduce such field distortions and increase in some extends the accuracy of the scanning systems. High-tech devices, temperature control systems and self-adjusting galvanometers are some expensive possibilities for reducing these deviations. This contribution presents a method for reducing field distortions using a coaxially coupled vision device and a self-designed calibration plate; this avoids, among others, the necessity of repetitive marking and measuring phases.

  19. Imaging of acoustic fields using optical feedback interferometry.

    Science.gov (United States)

    Bertling, Karl; Perchoux, Julien; Taimre, Thomas; Malkin, Robert; Robert, Daniel; Rakić, Aleksandar D; Bosch, Thierry

    2014-12-01

    This study introduces optical feedback interferometry as a simple and effective technique for the two-dimensional visualisation of acoustic fields. We present imaging results for several pressure distributions including those for progressive waves, standing waves, as well as the diffraction and interference patterns of the acoustic waves. The proposed solution has the distinct advantage of extreme optical simplicity and robustness thus opening the way to a low cost acoustic field imaging system based on mass produced laser diodes.

  20. Selective particle trapping and optical binding in the evanescent field of an optical nanofiber

    CERN Document Server

    Frawley, Mary C; Truong, Viet Giang; Sergides, Marios; Chormaic, Síle Nic

    2014-01-01

    The evanescent field of an optical nanofiber presents a versatile interface for the manipulation of micron-scale particles in dispersion. Here, we present a detailed study of the optical binding interactions of a pair of 3.13 $\\mu$m SiO$_2$ particles in the nanofiber evanescent field. Preferred equilibrium positions for the spheres as a function of nanofiber diameter and sphere size are discussed. We demonstrated optical propulsion and self-arrangement of chains of one to seven 3.13 $\\mu$m SiO$_2$ particles; this effect is associated with optical binding via simulated trends of multiple scattering effects. Incorporating an optical nanofiber into an optical tweezers setup facilitated the individual and collective introduction of selected particles to the nanofiber evanescent field for experiments. Computational simulations provide insight into the dynamics behind the observed behavior.

  1. Comparison of Out-Of-Field Neutron Equivalent Doses in Scanning Carbon and Proton Therapies for Cranial Fields

    DEFF Research Database (Denmark)

    Athar, B.; Henker, K.; Jäkel, O.

    Purpose: The purpose of this analysis is to compare the secondary neutron lateral doses from scanning carbon and proton beam therapies. Method and Materials: We simulated secondary neutron doses for out-of-field organs in an 11-year old male patient. Scanned carbon and proton beams were simulated...... separately using Monte Carlo techniques. We have used circular aperture field of 6 cm in diameter as a representative field. The tumor was assumed to be in the cranium. The range and modulation width for both carbon and proton beams were set to 15 cm and 10 cm, respectively. Results: In carbon therapy......, absorbed neutron doses to tonsils and pharynx close to the field-edge were found to be 5x10-4 mSv/GyE and 4x10-4 mSv/GyE, respectively. Whereas, neutron equivalent doses to tonsils and pharynx were estimated to be 0.57mSv/GyE and 0.55 mSv/GyE in scanned proton therapy, respectively. In heavy ion carbon...

  2. Comparison of Out-Of-Field Neutron Equivalent Doses in Scanning Carbon and Proton Therapies for Cranial Fields

    DEFF Research Database (Denmark)

    Athar, B.; Henker, K.; Jäkel, O.;

    Purpose: The purpose of this analysis is to compare the secondary neutron lateral doses from scanning carbon and proton beam therapies. Method and Materials: We simulated secondary neutron doses for out-of-field organs in an 11-year old male patient. Scanned carbon and proton beams were simulated...... separately using Monte Carlo techniques. We have used circular aperture field of 6 cm in diameter as a representative field. The tumor was assumed to be in the cranium. The range and modulation width for both carbon and proton beams were set to 15 cm and 10 cm, respectively. Results: In carbon therapy......, absorbed neutron doses to tonsils and pharynx close to the field-edge were found to be 5x10-4 mSv/GyE and 4x10-4 mSv/GyE, respectively. Whereas, neutron equivalent doses to tonsils and pharynx were estimated to be 0.57mSv/GyE and 0.55 mSv/GyE in scanned proton therapy, respectively. In heavy ion carbon...

  3. Field-Induced Deformation as a Mechanism for Scanning Tunneling Microscopy Based Nanofabrication

    DEFF Research Database (Denmark)

    Hansen, Ole; Ravnkilde, Jan Tue; Quaade, Ulrich;

    1998-01-01

    The voltage between tip and sample in a scanning tunneling microscope (STM) results in a large electric field localized near the tip apex. The mechanical stress due to this field can cause appreciable deformation of both tip and sample on the scale of the tunnel gap. We derive an approximate...... analytical expression for this deformation and confirm the validity of the result by comparison with a finite element analysis. We derive the condition for a field-induced jump to contact of tip and sample and show that this agrees well with experimental results for material transfer between tip and sample...

  4. The chromatographic separation of particles using optical electric fields

    DEFF Research Database (Denmark)

    Javier Alvarez, Nicolas; Jeppesen, Claus; Yvind, Kresten

    2013-01-01

    We introduce a new field-flow fractionation (FFF) technique, whereby molecules are separated based on their differential interaction (dielectrophoresis (DEP)) with optical electric fields, i.e. electric fields with frequencies in the visible and near-infrared range. The results show that a parallel...... array of axially non-uniform optical fields yielding an attractive potential (positive-DEP-FFF) is advantageous for the separation of polymers, biomolecules, and nanoparticles over very short distances. Furthermore, positive-DEP-FFF yields superior selectivity and resolution compared to conventional...

  5. Tracking features in retinal images of adaptive optics confocal scanning laser ophthalmoscope using KLT-SIFT algorithm.

    Science.gov (United States)

    Li, Hao; Lu, Jing; Shi, Guohua; Zhang, Yudong

    2010-06-28

    With the use of adaptive optics (AO), high-resolution microscopic imaging of living human retina in the single cell level has been achieved. In an adaptive optics confocal scanning laser ophthalmoscope (AOSLO) system, with a small field size (about 1 degree, 280 μm), the motion of the eye severely affects the stabilization of the real-time video images and results in significant distortions of the retina images. In this paper, Scale-Invariant Feature Transform (SIFT) is used to abstract stable point features from the retina images. Kanade-Lucas-Tomasi(KLT) algorithm is applied to track the features. With the tracked features, the image distortion in each frame is removed by the second-order polynomial transformation, and 10 successive frames are co-added to enhance the image quality. Features of special interest in an image can also be selected manually and tracked by KLT. A point on a cone is selected manually, and the cone is tracked from frame to frame.

  6. Measurements Using a Scanning Near-Field Coaxial Probe Microwave Microscope

    Science.gov (United States)

    Steinhauer, David E.; Vlahacos, C. P.; Dutta, Sudeep; Wellstood, F. C.; Anlage, Steven M.

    1997-03-01

    We have developed a scanning near-field microwave microscope using an open-ended coaxial probe.(C. P. Vlahacos, et al.) Appl. Phys. Lett. 69, 3272 (1996)^,(S. M. Anlage, et al.) IEEE Trans. Appl. Supercond. (1997) The probe is connected to a coaxial transmission line, which acts as a resonant microwave circuit. The probe is scanned over a sample while microwave energy is fed into the other end of the coaxial line. The quantities that can be measured simultaneously during a scan are shifts in the resonant frequencies, amplitude of the resonant peaks, quality factor of the circuit, and changes in phase relative to the microwave source. We will show images and discuss the theory of how the data are related to properties of the sample.

  7. Novel grid-based optical Braille conversion: from scanning to wording

    Science.gov (United States)

    Yoosefi Babadi, Majid; Jafari, Shahram

    2011-12-01

    Grid-based optical Braille conversion (GOBCO) is explained in this article. The grid-fitting technique involves processing scanned images taken from old hard-copy Braille manuscripts, recognising and converting them into English ASCII text documents inside a computer. The resulted words are verified using the relevant dictionary to provide the final output. The algorithms employed in this article can be easily modified to be implemented on other visual pattern recognition systems and text extraction applications. This technique has several advantages including: simplicity of the algorithm, high speed of execution, ability to help visually impaired persons and blind people to work with fax machines and the like, and the ability to help sighted people with no prior knowledge of Braille to understand hard-copy Braille manuscripts.

  8. Z-scan measurement of nonlinear optical properties of BiOCl nanosheets.

    Science.gov (United States)

    Chen, Runze; Zheng, Xin; Zhang, Yangwei; Tang, Yuhua; Jiang, Tian

    2015-07-20

    Bismuth oxyhalides, such as bismuth oxychlorides (BiOCl), are layered materials with [Bi2O2]2+ layers sandwiched between two sheets of Cl ions. Much work has focused on the potential for bismuth oxyhalides to be a photocatalyst, but their nonlinear optical properties are rarely studied. In this work, the nonlinear refractive index of BiOCl nanosheets has been characterized with Z-scan measurement under 800 nm femtosecond pulsed laser excitation. A shift from saturable absorption to reverse saturable absorption was observed at higher input pump intensities in the experiments. The transition process was analyzed using a phenomenological model based on saturable absorption and two-photon absorption.

  9. Investigation of nonlinear optical properties of various organic materials by the Z-scan method

    Science.gov (United States)

    Ganeev, R. A.; Boltaev, G. S.; Tugushev, R. I.; Usmanov, T.

    2012-06-01

    We have studied the nonlinear optical properties of various organic materials (vegetable oil, juice, wine, cognac, Coca-Cola and Fanta drinks, Nescafé coffee, tea, gasoline, clock oil, glycerol, and polyphenyl ether) that are used in everyday life. Their nonlinearities have been studied by the Z-scan method in the near-IR and visible spectral ranges. We have shown that the majority of samples possess a nonlinear absorption; however, some of the studied materials show a strong saturated absorption and nonlinear refraction. Red wine and glycerol proved to be the most interesting materials. For these samples, we have observed a change in the sign of the nonlinear absorption with increasing laser intensity, which was attributed to the competition between two-photon absorption and saturated absorption.

  10. Measurements of nonlinear optical properties of PVDF/ZnO using Z-scan technique

    Energy Technology Data Exchange (ETDEWEB)

    Shanshool, Haider Mohammed, E-mail: haidshan62@gmail.com [Ministry of Science and Technology, Baghdad (Iraq); Yahaya, Muhammad [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor (Malaysia); Yunus, Wan Mahmood Mat [Department of Physics, Faculty of Science, University Putra Malaysia, Serdang (Malaysia); Abdullah, Ibtisam Yahya [Department of Physics, College of Science, University of Mosul, Mosul (Iraq)

    2015-10-15

    The nonlinear optical properties of ZnO nanoparticles dispersed in poly (vinylidene fluoride) (PVDF) polymer are investigated. PVDF/ZnO nanocomposites were prepared by mixing different concentrations of ZnO nanoparticles, as the filler, with PVDF, as the polymer matrix, using casting method. Acetone was used as a solvent for the polymer. FTIR spectra of the samples were analyzed thus confirming the formation of α and β phases. The absorbance spectra of the samples were obtained, thereby showing high absorption in the UV region. The linear absorption coefficient was calculated. The single-beam Z-scan technique was used to measure the nonlinear refractive index and the nonlinear absorption coefficient of the PVDF/ZnO nanocomposite samples. We observed that the nonlinear refractive index is in the order of 10{sup -13} cm{sup 2}/W with the negative sign, whereas the nonlinear absorption coefficient is in the order of 10{sup -8} cm/W. (author)

  11. Distributed optical fiber dynamic magnetic field sensor based on magnetostriction.

    Science.gov (United States)

    Masoudi, Ali; Newson, Trevor P

    2014-05-01

    A distributed optical fiber sensor is introduced which is capable of quantifying multiple magnetic fields along a 1 km sensing fiber with a spatial resolution of 1 m. The operation of the proposed sensor is based on measuring the magnetorestrictive induced strain of a nickel wire attached to an optical fiber. The strain coupled to the optical fiber was detected by measuring the strain-induced phase variation between the backscattered Rayleigh light from two segments of the sensing fiber. A magnetic field intensity resolution of 0.3 G over a bandwidth of 50-5000 Hz was demonstrated.

  12. Field approach in the transformation optics concept

    DEFF Research Database (Denmark)

    Novitsky, Andrey; Zhukovsky, Sergei; Barkovsky, L. M.

    2012-01-01

    distribution (e.g., Gaussian and sinusoidal) is studied to validate the effectiveness of the field-based formulation. As for the boundary conditions for the cloaked region the absence of the normal component of the Poynting vector is justified. In the frames of the field-based approach the physical reasons...

  13. Percolation of optical excitation mediated by near-field interactions

    Science.gov (United States)

    Naruse, Makoto; Kim, Song-Ju; Takahashi, Taiki; Aono, Masashi; Akahane, Kouichi; D'Acunto, Mario; Hori, Hirokazu; Thylén, Lars; Katori, Makoto; Ohtsu, Motoichi

    2017-04-01

    Optical excitation transfer in nanostructured matter has been intensively studied in various material systems for versatile applications. Herein, we theoretically and numerically discuss the percolation of optical excitations in randomly organized nanostructures caused by optical near-field interactions governed by Yukawa potential in a two-dimensional stochastic model. The model results demonstrate the appearance of two phases of percolation of optical excitation as a function of the localization degree of near-field interaction. Moreover, it indicates sublinear scaling with percolation distances when the light localization is strong. Furthermore, such a character is maximized at a particular size of environments. The results provide fundamental insights into optical excitation transfer and will facilitate the design and analysis of nanoscale signal-transfer characteristics.

  14. Structured caustic vector vortex optical field: manipulating optical angular momentum flux and polarization rotation.

    Science.gov (United States)

    Chen, Rui-Pin; Chen, Zhaozhong; Chew, Khian-Hooi; Li, Pei-Gang; Yu, Zhongliang; Ding, Jianping; He, Sailing

    2015-05-29

    A caustic vector vortex optical field is experimentally generated and demonstrated by a caustic-based approach. The desired caustic with arbitrary acceleration trajectories, as well as the structured states of polarization (SoP) and vortex orders located in different positions in the field cross-section, is generated by imposing the corresponding spatial phase function in a vector vortex optical field. Our study reveals that different spin and orbital angular momentum flux distributions (including opposite directions) in different positions in the cross-section of a caustic vector vortex optical field can be dynamically managed during propagation by intentionally choosing the initial polarization and vortex topological charges, as a result of the modulation of the caustic phase. We find that the SoP in the field cross-section rotates during propagation due to the existence of the vortex. The unique structured feature of the caustic vector vortex optical field opens the possibility of multi-manipulation of optical angular momentum fluxes and SoP, leading to more complex manipulation of the optical field scenarios. Thus this approach further expands the functionality of an optical system.

  15. All-optical histology using two photon laser scanning microscopy and ablation with ultrashort pulses

    Science.gov (United States)

    Tsai, Philbert S.

    This dissertation discusses the use of ultrashort laser pulses to image and manipulate tissue for the purpose of three-dimensional histological reconstruction of extended brain structures. Two photon laser scanning microscopy (TPLSM) and ultrashort pulsed laser ablation are used to provide in situ three-dimensional imaging through thick preparations of fixed tissue. Surface regions of fixed tissue are first imaged using TPLSM. The imaged regions are then removed by ablation with amplified, ultrashort laser pulses, thereby exposing a previously underlying tissue region for imaging. This process of imaging and ablation proceeds iteratively until the desired tissue volume has been processed. First, the principles, design, and construction of a two photon laser scanning microscope are discussed, followed by a discussion of the physical mechanisms of tissue ablation with ultrashort laser pulses. The compatibility of tissue ablation using ultrashort pulses with subsequent histological analysis, particularly with fluorescent microscopy, is evaluated. Tissue ablation with ultrashort laser pulses is found to produce ablated tissue surfaces that are smooth to within a micrometer. Intrinsic fluorescence as well as immunoreactivity are found to be resilient to the ablation process. The all-optical histological technique is demonstrated on brain tissue from rats and mice, including tissue from embryonic mouse as early at E15. The ablation process is shown to preserve both macroscopic and microscopic structures within tissue. To facilitate the all-optical histological analysis of neuronal vasculature and its relative distribution to surrounding neuronal tissue, a fluorescent gel perfusion technique is developed that provides a temperature-stabilized fluorescent label of the neuronal vasculature. The use of immunohistochemistry to label specific cell populations throughout an 800 micrometer-thick tissue section is demonstrated. Additionally, the immersion of fixed tissue in high

  16. Scanning laser optical tomography resolves structural plasticity during regeneration in an insect brain.

    Directory of Open Access Journals (Sweden)

    René Eickhoff

    Full Text Available BACKGROUND: Optical Projection Tomography (OPT is a microscopic technique that generates three dimensional images from whole mount samples the size of which exceeds the maximum focal depth of confocal laser scanning microscopes. As an advancement of conventional emission-OPT, Scanning Laser Optical Tomography (SLOTy allows simultaneous detection of fluorescence and absorbance with high sensitivity. In the present study, we employ SLOTy in a paradigm of brain plasticity in an insect model system. METHODOLOGY: We visualize and quantify volumetric changes in sensory information procession centers in the adult locust, Locusta migratoria. Olfactory receptor neurons, which project from the antenna into the brain, are axotomized by crushing the antennal nerve or ablating the entire antenna. We follow the resulting degeneration and regeneration in the olfactory centers (antennal lobes and mushroom bodies by measuring their size in reconstructed SLOTy images with respect to the untreated control side. Within three weeks post treatment antennal lobes with ablated antennae lose as much as 60% of their initial volume. In contrast, antennal lobes with crushed antennal nerves initially shrink as well, but regain size back to normal within three weeks. The combined application of transmission-and fluorescence projections of Neurobiotin labeled axotomized fibers confirms that recovery of normal size is restored by regenerated afferents. Remarkably, SLOTy images reveal that degeneration of olfactory receptor axons has a trans-synaptic effect on second order brain centers and leads to size reduction of the mushroom body calyx. CONCLUSIONS: This study demonstrates that SLOTy is a suitable method for rapid screening of volumetric plasticity in insect brains and suggests its application also to vertebrate preparations.

  17. Optics for multimode lasers with elongated depth of field

    Science.gov (United States)

    Laskin, Alexander; Laskin, Vadim; Ostrun, Aleksei

    2017-02-01

    Modern multimode high-power lasers are widely used in industrial applications and control of their radiation, especially by focusing, is of great importance. Because of relatively low optical quality, characterized by high values of specifications Beam Parameter Product (BPP) or M², the depth of field by focusing of multimode laser radiation is narrow. At the same time laser technologies like deep penetration welding, cutting of thick metal sheets get benefits from elongated depth of field in area of focal plane, therefore increasing of zone along optical axis with minimized spot size is important technical task. As a solution it is suggested to apply refractive optical systems splitting an initial laser beam into several beamlets, which are focused in different foci separated along optical axis with providing reliable control of energy portions in each separate focus, independently of beam size or mode structure. With the multi-focus optics, the length of zone of material processing along optical axis is defined rather by distances between separate foci, which are determined by optical design of the optics and can be chosen according to requirements of a particular laser technology. Due to stability of the distances between foci there is provided stability of a technology process. This paper describes some design features of refractive multi-focus optics, examples of real implementations and experimental results will be presented as well.

  18. Combining scanning haptic microscopy and fibre optic Raman spectroscopy for tissue characterization.

    Science.gov (United States)

    Candefjord, S; Murayama, Y; Nyberg, M; Hallberg, J; Ramser, K; Ljungberg, B; Bergh, A; Lindahl, O A

    2012-08-01

    The tactile resonance method (TRM) and Raman spectroscopy (RS) are promising for tissue characterization in vivo. Our goal is to combine these techniques into one instrument, to use TRM for swift scanning, and RS for increasing the diagnostic power. The aim of this study was to determine the classification accuracy, using support vector machines, for measurements on porcine tissue and also produce preliminary data on human prostate tissue. This was done by developing a new experimental set-up combining micro-scale TRM-scanning haptic microscopy (SHM)-for assessing stiffness on a micro-scale, with fibre optic RS measurements for assessing biochemical content. We compared the accuracy using SHM alone versus SHM combined with RS, for different degrees of tissue homogeneity. The cross-validation classification accuracy for healthy porcine tissue types using SHM alone was 65-81%, and when RS was added it increased to 81-87%. The accuracy for healthy and cancerous human tissue was 67-70% when only SHM was used, and increased to 72-77% for the combined measurements. This shows that the potential for swift and accurate classification of healthy and cancerous prostate tissue is high. This is promising for developing a tool for probing the surgical margins during prostate cancer surgery.

  19. Focussed ion beam machined cantilever aperture probes for near-field optical imaging.

    Science.gov (United States)

    Jin, E X; Xu, X

    2008-03-01

    Near-field optical probe is the key element of a near-field scanning optical microscopy (NSOM) system. The key innovation in the first two NSOM experiments (Pohl et al., 1984; Lewis et al., 1984) is the fabrications of a sub-wavelength optical aperture at the apex of a sharply pointed transparent probe tip with a thin metal coating. This paper discusses the routine use of focussed ion beam (FIB) to micro-machine NSOM aperture probes from the commercial silicon nitride cantilevered atomic force microscopy probes. Two FIB micro-machining approaches are used to form a nanoaperture of controllable size and shape at the apex of the tip. The FIB side slicing produces a silicon nitride aperture on the flat-end tips with controllable sizes varying from 120 nm to 30 nm. The FIB head-on drilling creates holes on the aluminium-coated tips with sizes down to 50 nm. Nanoapertures in C and bow tie shapes can also be patterned using the FIB head-on milling method to possibly enhance the optical transmission. A transmission-collection NSOM system is constructed from a commercial atomic force microscopy to characterize the optical resolution of FIB-micro-machined aperture tips. The optical resolution of 78 nm is demonstrated by an aperture probe fabricated by FIB head-on drilling. Simultaneous topography imaging can also be realized using the same probe. By mapping the optical near-field from a bow-tie aperture, optical resolution as small as 59 nm is achieved by an aperture probe fabricated by the FIB side slicing method. Overall, high resolution and reliable optical imaging of routinely FIB-micro-machined aperture probes are demonstrated.

  20. The Optical Chirality Flux as a Useful Far-Field Probe of Chiral Near Fields

    CERN Document Server

    Poulikakos, Lisa V; McPeak, Kevin M; Burger, Sven; Niegemann, Jens; Hafner, Christian; Norris, David J

    2016-01-01

    To optimize the interaction between chiral matter and highly twisted light, quantities that can help characterize chiral electromagnetic fields near nanostructures are needed. Here, by analogy with Poynting's theorem, we formulate the time-averaged conservation law of optical chirality in lossy dispersive media and identify the optical chirality flux as an ideal far-field observable for characterizing chiral optical near fields. Bounded by the conservation law, we show that it provides precise information, unavailable from circular dichroism spectroscopy, on the magnitude and handedness of highly twisted fields near nanostructures.

  1. Auto-elimination of fiber optical path-length drift in a frequency scanning interferometer for absolute distance measurements

    Science.gov (United States)

    Tao, Long; Liu, Zhigang; Zhang, Weibo

    2015-09-01

    Because of its compact size and portability, optical fiber has been wildly used as optical paths in frequency-scanning interferometers for high-precision absolute distance measurements. However, since the fiber is sensitive to ambient temperature, its length and refractive index change with temperature, resulting in an optical path length drift that influences the repeatability of measurements. To improve the thermal stability of the measurement system, a novel frequency-scanning interferometer composed of two Michelson-type interferometers sharing a common fiber optical path is proposed. One interferometer defined as origin interferometer is used to monitor the drift of the measurement origin due to the optical path length drift of the optical fiber under on-site environment. The other interferometer defined as measurement interferometer is used to measure the distance to the target. Because the optical path length drift of the fiber appears in both interferometers, its influence can be eliminated by subtracting the optical path difference of the origin interferometer from the optical path difference of the measurement interferometer. A prototype interferometer was developed in our research, and experimental results demonstrate its robustness and stability. Under on-site environment, an accuracy about 4 μm was achieved for a distance of about 1 m.

  2. The Galactic Magnetic Field and UHECR Optics

    CERN Document Server

    Farrar, Glennys R; Khurana, Deepak; Sutherland, Michael

    2015-01-01

    A good model of the Galactic magnetic field is crucial for estimating the Galactic contribution in dark matter and CMB-cosmology studies, determining the sources of UHECRs, and also modeling the transport of Galactic CRs since the halo field provides an important escape route for by diffusion along its field lines. We briefly review the observational foundations of the Jansson-Farrar 2012 model for the large scale structure of the GMF, underscoring the robust evidence for a N-to-S directed, spiraling halo field. New results on the lensing effect of the GMF on UHECRs are presented, displaying multiple images and dramatic magnification and demagnification that varies with source direction and CR rigidity.

  3. Burying of channel optical waveguides: relation between near-field measurement and Ag concentration profile

    Science.gov (United States)

    Tsai, Wan-Shao; Liu, Yen-Huang; Barkman, Ondrej; Prajzler, Vaclav; Stanek, Stanislav; Nekvindova, Pavla

    2015-01-01

    Two-step field-assisted ion-exchanged waveguides have been fabricated on a glass substrate. The concentration profiles of the exchanged ions were measured with electron microprobe. The waveguides were characterized under scanning electron microscope and optical microscope for the investigation of burying structures. Guiding mode patterns were characterized with near-field measurement, where symmetric profiles were observed for the burying-type waveguide. The refractive index profiles were also measured with a modified end-fire coupling method. The relation between ion concentration profiles and index profiles were compared for the waveguides with different fabrication process.

  4. High-Resolution Adaptive Optics Scanning Laser Ophthalmoscope with Dual Deformable Mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Chen, D C; Jones, S M; Silva, D A; Olivier, S S

    2006-08-11

    Adaptive optics scanning laser ophthalmoscope (AO SLO) has demonstrated superior optical quality of non-invasive view of the living retina, but with limited capability of aberration compensation. In this paper, we demonstrate that the use of dual deformable mirrors can effectively compensate large aberrations in the human retina. We used a bimorph mirror to correct large-stroke, low-order aberrations and a MEMS mirror to correct low-stroke, high-order aberration. The measured ocular RMS wavefront error of a test subject was 240 nm without AO compensation. We were able to reduce the RMS wavefront error to 90 nm in clinical settings using one deformable mirror for the phase compensation and further reduced the wavefront error to 48 nm using two deformable mirrors. Compared with that of a single-deformable-mirror SLO system, dual AO SLO offers much improved dynamic range and better correction of the wavefront aberrations. The use of large-stroke deformable mirrors provided the system with the capability of axial sectioning different layers of the retina. We have achieved diffraction-limited in-vivo retinal images of targeted retinal layers such as photoreceptor layer, blood vessel layer and nerve fiber layers with the combined phase compensation of the two deformable mirrors in the AO SLO.

  5. Study of in vitro RBCs membrane elasticity with AOD scanning optical tweezers.

    Science.gov (United States)

    Song, Huadong; Liu, Ying; Zhang, Bin; Tian, Kangzhen; Zhu, Panpan; Lu, Hao; Tang, Qi

    2017-01-01

    The elasticity of red cell membrane is a critical physiological index for the activity of RBC. Study of the inherent mechanism for RBCs membrane elasticity transformation is attention-getting all along. This paper proposes an optimized measurement method of erythrocytes membrane shear modulus incorporating acousto-optic deflector (AOD) scanning optical tweezers system. By use of this method, both membrane shear moduli and sizes of RBCs with different in vitro times were determined. The experimental results reveal that the RBCs membrane elasticity and size decline with in vitro time extension. In addition, semi quantitative measurements of S-nitrosothiol content in blood using fluorescent spectrometry during in vitro storage show that RBCs membrane elasticity change is positively associated with the S-nitrosylation level of blood. The analysis considered that the diminished activity of the nitric oxide synthase makes the S-nitrosylation of in vitro blood weaker gradually. The main reason for worse elasticity of the in vitro RBCs is that S-nitrosylation effect of spectrin fades. These results will provide a guideline for further study of in vitro cells activity and other clinical applications.

  6. Retinal degeneration in progressive supranuclear palsy measured by optical coherence tomography and scanning laser polarimetry.

    Science.gov (United States)

    Stemplewitz, Birthe; Kromer, Robert; Vettorazzi, Eik; Hidding, Ute; Frings, Andreas; Buhmann, Carsten

    2017-07-13

    This cross-sectional study compared the retinal morphology between patients with progressive supranuclear palsy (PSP) and healthy controls. (The retinal nerve fiber layer (RNFL) around the optic disc and the retina in the macular area of 22 PSP patients and 151 controls were investigated by spectral domain optical coherence tomography (SD-OCT). Additionally, the RNFL and the nerve fiber index (NFI) were measured by scanning laser polarimetry (SLP). Results of RNFL measurements with SD-OCT and SLP were compared to assess diagnostic discriminatory power. Applying OCT, PSP patients showed a smaller RNFL thickness in the inferior nasal and inferior temporal areas. The macular volume and the thickness of the majority of macular sectors were reduced compared to controls. SLP data showed a thinner RNFL thickness and an increase in the NFI in PSP patients. Sensitivity and specificity to discriminate PSP patients from controls were higher applying SLP than SD-OCT. Retinal changes did not correlate with disease duration or severity in any OCT or SLP measurement. PSP seems to be associated with reduced thickness and volume of the macula and reduction of the RNFL, independent of disease duration or severity. Retinal imaging with SD-OCT and SLP might become an additional tool in PSP diagnosis.

  7. Near-field imaging of optical antenna modes in the mid-infrared.

    Science.gov (United States)

    Olmon, Robert L; Krenz, Peter M; Jones, Andrew C; Boreman, Glenn D; Raschke, Markus B

    2008-12-08

    Optical antennas can enhance the coupling between free-space propagating light and the localized excitation of nanoscopic light emitters or receivers, thus forming the basis of many nanophotonic applications. Their functionality relies on an understanding of the relationship between the geometric parameters and the resulting near-field antenna modes. Using scattering-type scanning near-field optical microscopy (s-SNOM) with interferometric homodyne detection, we investigate the resonances of linear Au wire antennas designed for the mid-IR by probing specific vector near-field components. A simple effective wavelength scaling is observed for single wires with lambda(eff) = lambda /(2.0+/- 0.2), specific to the geometric and material parameters used. The disruption of the coherent current oscillation by introducing a gap gives rise to an effective multipolar mode for the two near-field coupled segments. Using antenna theory and numerical electrodynamics simulations two distinct coupling regimes are considered that scale with gap width or reactive near-field decay length, respectively. The results emphasize the distinct antenna behavior at optical frequencies compared to impedance matched radio frequency (RF) antennas and provide experimental confirmation of theoretically predicted scaling laws at optical frequencies.

  8. Collimating Slicer for Optical Integral Field Spectroscopy

    CERN Document Server

    Laurent, Florence

    2016-01-01

    Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being composed of a classical spectrograph.The development of a Collimating Slicer aims at proposing a new type of integral field spectrograph which should be more compact. The main idea is to combine the image slicer with the collimator of the spectrograph, thus mixing the spatial and spectral units. The traditional combination of slicer, pupil and slit elements and the spectrograph collimator is replaced by a new one composed of a slicer and collimator only. In this paper, the state of the art of integral field spectroscopy using image slicers is described. The new system based onto the development of a Collimating Slic...

  9. Integrated adaptive optics optical coherence tomography and adaptive optics scanning laser ophthalmoscope system for simultaneous cellular resolution in vivo retinal imaging.

    Science.gov (United States)

    Zawadzki, Robert J; Jones, Steven M; Pilli, Suman; Balderas-Mata, Sandra; Kim, Dae Yu; Olivier, Scot S; Werner, John S

    2011-06-01

    We describe an ultrahigh-resolution (UHR) retinal imaging system that combines adaptive optics Fourier-domain optical coherence tomography (AO-OCT) with an adaptive optics scanning laser ophthalmoscope (AO-SLO) to allow simultaneous data acquisition by the two modalities. The AO-SLO subsystem was integrated into the previously described AO-UHR OCT instrument with minimal changes to the latter. This was done in order to ensure optimal performance and image quality of the AO- UHR OCT. In this design both imaging modalities share most of the optical components including a common AO-subsystem and vertical scanner. One of the benefits of combining Fd-OCT with SLO includes automatic co-registration between two acquisition channels for direct comparison between retinal structures imaged by both modalities (e.g., photoreceptor mosaics or microvasculature maps). Because of differences in the detection scheme of the two systems, this dual imaging modality instrument can provide insight into retinal morphology and potentially function, that could not be accessed easily by a single system. In this paper we describe details of the components and parameters of the combined instrument, including incorporation of a novel membrane magnetic deformable mirror with increased stroke and actuator count used as a single wavefront corrector. We also discuss laser safety calculations for this multimodal system. Finally, retinal images acquired in vivo with this system are presented.

  10. Full-field illumination approach with multiple speckle for optical-resolution photoacoustic microscopy (Conference Presentation)

    Science.gov (United States)

    Poisson, Florian; Bossy, Emmanuel

    2016-03-01

    Optical-resolution photoacoustic endomicroscopy (OR-PAE) allows going beyond the limited penetration depth of conventional optical-resolution photoacoustic systems. Recently, it has been shown that OR-PAE may be performed through minimally invasive multimode fibers, by raster scanning a focus spot with optical wavefront shaping [1]. Here we introduce for the first time an approach to perform OR-PAE through a multimode fiber with a full-field illumination approach. By using multiple known speckle patterns, we show that it is possible to obtain optical-diffraction limited photoacoustic images, with the same resolution as that obtained by raster scanning a focus spot, i.e that of the speckle grain size. The fluctuations patterns of the photoacoustic amplitude at each pixel in the sample plane with the series of multiple speckle illumination were used to encode each pixel. This approach with known speckle illumination requires an initial calibration stage, that consists in learn a set of fluctuation patterns pixel per pixel, which will encode patterns each pixel of the scanned area. A point-like absorber was scanned across the filed-of-view during the calibration stage to acquire the reference patterns. Image reconstruction may be carried out by cross-correlating the series of photoacoustic amplitude measured with the sample to the reference patterns obtained during the calibration stage. In this work, the approach above was carried out both theoretically with Monte-carlo simulations and experimentally through a multi-mode fiber with samples made of absorbing spheres. [1] Papadopoulos et al., " Optical-resolution photoacoustic microscopy by use of a multimode fiber", Appl. Phys. Lett., 102(21), 2013

  11. Optical fiber tip for field-enhanced second harmonic generation.

    Science.gov (United States)

    Pal, Sudipta Sarkar; Mondal, Samir K; Bajpai, Phun Phun; Kapur, Pawan

    2012-10-01

    We propose a simple optical fiber tip for field-enhanced second harmonic generation (SHG). The tip shows nonlinear phenomena of SHG over a wide range of sources, at least from 630 to 830 nm. The optical field corresponding to the second harmonic appears as a nondiffracting bottle beam with voids due to the surface curvature of the tip. The field-enhanced second harmonic can also induce surface plasmons, converting the tip to a plasmonic probe with reduced background signal. The tip can be useful in nanophotonics characterization. As an example, we demonstrate the tip's response as a surface-enhanced Raman spectroscopy probe.

  12. Electro-optic probe measurements of electric fields in plasmas

    Science.gov (United States)

    Nishiura, M.; Yoshida, Z.; Mushiake, T.; Kawazura, Y.; Osawa, R.; Fujinami, K.; Yano, Y.; Saitoh, H.; Yamasaki, M.; Kashyap, A.; Takahashi, N.; Nakatsuka, M.; Fukuyama, A.

    2017-02-01

    The direct measurements of high-frequency electric fields in a plasma bring about significant advances in the physics and engineering of various waves. We have developed an electro-optic sensor system based on the Pockels effect. Since the signal is transmitted through an optical fiber, the system has high tolerance for electromagnetic noises. To demonstrate its applicability to plasma experiments, we report the first result of measurement of the ion-cyclotron wave excited in the RT-1 magnetosphere device. This study compares the results of experimental field measurements with simulation results of electric fields in plasmas.

  13. Radiation engineering of optical antennas for maximum field enhancement.

    Science.gov (United States)

    Seok, Tae Joon; Jamshidi, Arash; Kim, Myungki; Dhuey, Scott; Lakhani, Amit; Choo, Hyuck; Schuck, Peter James; Cabrini, Stefano; Schwartzberg, Adam M; Bokor, Jeffrey; Yablonovitch, Eli; Wu, Ming C

    2011-07-13

    Optical antennas have generated much interest in recent years due to their ability to focus optical energy beyond the diffraction limit, benefiting a broad range of applications such as sensitive photodetection, magnetic storage, and surface-enhanced Raman spectroscopy. To achieve the maximum field enhancement for an optical antenna, parameters such as the antenna dimensions, loading conditions, and coupling efficiency have been previously studied. Here, we present a framework, based on coupled-mode theory, to achieve maximum field enhancement in optical antennas through optimization of optical antennas' radiation characteristics. We demonstrate that the optimum condition is achieved when the radiation quality factor (Q(rad)) of optical antennas is matched to their absorption quality factor (Q(abs)). We achieve this condition experimentally by fabricating the optical antennas on a dielectric (SiO(2)) coated ground plane (metal substrate) and controlling the antenna radiation through optimizing the dielectric thickness. The dielectric thickness at which the matching condition occurs is approximately half of the quarter-wavelength thickness, typically used to achieve constructive interference, and leads to ∼20% higher field enhancement relative to a quarter-wavelength thick dielectric layer.

  14. Reversible quantum optical data storage based on resonant Raman optical field excited spin coherence.

    Science.gov (United States)

    Ham, Byoung S

    2008-09-01

    A method of reversible quantum optical data storage is presented using resonant Raman field excited spin coherence, where the spin coherence is stored in an inhomogeneously broadened spin ensemble. Unlike the photon echo method, in the present technique, a 2pi Raman optical rephasing pulse area is used and multimode (parallel) optical channels are available in which the multimode access gives a great benefit to quantum information processors such as quantum repeaters.

  15. Integration and Evaluation of Nanophotonic Devices Using Optical Near Field

    Science.gov (United States)

    Yatsui, Takashi; Nomura, Wataru; Yi, Gyu-Chul; Ohtsu, Motoichi

    In this chapter, we review the optical near-field phenomena and their applications to realize the nanophotonic device. To realize the nanometer-scale controllability in size and position, we demonstrate the feasibility of nanometer-scale chemical vapor deposition using optical near-field techniques (see Sect. 15.2). In which, the probe-less fabrication method for mass production is also demonstrated. To confirm the promising optical properties of individual ZnO for realizing nanophotonic devices, we performed the near-field evaluation of the ZnO quantum structure (see Sect. 15.3). To drive the nanophotonic device with external conventional diffraction-limited photonic device, the far-/near-field conversion device is required. Section 15.4 reviews nanometer-scale waveguide to be used as such a conversion device of the nanophotonic ICs.

  16. Intramolecular charge transfer and Z-scan studies of a semiorganic nonlinear optical material sodium acid phthalate hemihydrate: a vibrational spectroscopic study.

    Science.gov (United States)

    Sajan, D; Vijayan, N; Safakath, K; Philip, Reji; Joe, I Hubert

    2011-07-28

    FT-IR and Raman spectra of the nonlinear optical material sodium acid phthalate hemihydrate crystal have been recorded and analyzed. The equilibrium geometry, bonding features, and harmonic vibrational wavenumbers have been investigated with the help of the B3LYP density functional theory method. A detailed interpretation of the vibrational spectra was carried out with the aid of normal coordinate analysis following the scaled quantum mechanical force field methodology. The natural bond orbital analysis confirms the occurrence of strong intermolecular hydrogen bonding in the molecule. Nonlinear optical absorption of the sample has been studied at 532 nm using single 5 ns laser pulses, employing the open-aperture Z-scan technique. It is found that the NaAPH molecule is a potential candidate for optical limiting applications. © 2011 American Chemical Society

  17. Tuning of successively scanned two monolithic Vernier-tuned lasers and selective data sampling in optical comb swept source optical coherence tomography

    OpenAIRE

    Choi, Dong-hak; YOSHIMURA, Reiko; Ohbayashi, Kohji

    2013-01-01

    Monolithic Vernier tuned super-structure grating distributed Bragg reflector (SSG-DBR) lasers are expected to become one of the most promising sources for swept source optical coherence tomography (SS-OCT) with a long coherence length, reduced sensitivity roll-off, and potential capability for a very fast A-scan rate. However, previous implementations of the lasers suffer from four main problems: 1) frequencies deviate from the targeted values when scanned, 2) large amounts of noise appear as...

  18. Dynamics of annular bright field imaging in scanning transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Findlay, S.D., E-mail: scott@sigma.t.u-tokyo.ac.jp [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); Shibata, N. [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); PRESTO, Japan Science and Technology Agency, Saitama 332-0012 (Japan); Sawada, H.; Okunishi, E.; Kondo, Y. [JEOL Ltd., Tokyo 196-8558 (Japan); Ikuhara, Y. [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); Nanostructures Research Laboratory, Japan Fine Ceramics Center, Nagoya 456-8587 (Japan); WPI Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

    2010-06-15

    We explore the dynamics of image formation in the so-called annular bright field mode in scanning transmission electron microscopy, whereby an annular detector is used with detector collection range lying within the cone of illumination, i.e. the bright field region. We show that this imaging mode allows us to reliably image both light and heavy columns over a range of thickness and defocus values, and we explain the contrast mechanisms involved. The role of probe and detector aperture sizes is considered, as is the sensitivity of the method to intercolumn spacing and local disorder.

  19. Measurement of the Third-Order Nonlinear Optical Coefficient of ZnO Crystals by Using ICCD-Z-Scan

    Institute of Scientific and Technical Information of China (English)

    JIA Guang-Ming; ZHANG Gui-Zhong; XIANG Wang-Hua; J.B.Ketterson

    2004-01-01

    We present an image-intensified charge-coupled-device (ICCD) version of Z-scan by employing an ICCD detector and fixing the sample at the beam waist, and a measurement of the third-order nonlinear optical coefficient of single crystal zinc oxide (ZnO). The X(3) value of -9.1 × 10-15 cm2/W measured is in agreement with the published result. Our Z-scan configuration of placing sample at beam waist and collecting the whole wavefront by an ICCD detector is simple and can be deployed in cryogenic research where the sample cannot be Z-scanned.

  20. Integrated optical waveguide sensor for lighting impulse electric field measurement

    Science.gov (United States)

    Zhang, Jiahong; Chen, Fushen; Sun, Bao; Chen, Kaixin

    2014-09-01

    A Lithium niobate (LiNbO3) based integrated optical E-field sensor with an optical waveguide Mach-Zehnder interferometer (MZI) and a tapered antenna has been designed and fabricated for the measurement of the pulsed electric field. The minimum detectable E-field of the sensor was 10 kV/m. The sensor showed a good linear characteristic while the input E-fields varied from 10 kV/m to 370 kV/m. Furthermore, the maximum detectable E-field of the sensor, which could be calculated from the sensor input/output characteristic, was approximately equal to 1000 kV/m. All these results suggest that such sensor can be used for the measurement of the lighting impulse electric field.

  1. Nonlinear optical processes at quadrupole polariton resonance in Cu2O as probed by a Z-scan technique

    Science.gov (United States)

    Mani, S.; Jang, J. I.; Ketterson, J. B.

    2010-09-01

    Employing a modified Z-scan technique at 2 K, we monitor not only the fundamental (ω) but also the frequency-doubled (2ω) and tripled (3ω) Z-scan responses in Cu2O when the input laser frequency ω is tuned to the two-photon quadrupole polariton resonance. The Z-scan response at ω allows us to accurately estimate the absolute number of polaritons generated via two-photon absorption. A striking dip is observed near the 2ω Z-scan focus which basically arises from Auger-type recombination of polaritons. Under high excitation levels, the 3ω Z-scan shows strong third harmonic generation. Based on the nonlinear optical parameters determined, we estimate the experimental polariton density achievable and propose a direction for polariton-based Bose-Einstein condensation in Cu2O .

  2. Statistical behaviour of optical vortex fields

    CSIR Research Space (South Africa)

    Roux, FS

    2009-09-01

    Full Text Available Phase screens Least squares phase removersScintillated beam Observation plane Initial number of optical vortices is reduced asymptotically until equilibrium is reached. 0 20 40 60 80 100 120 140 160 180 200 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1... ? complex coefficients 6 6 overall amplitude and phase 6 morphology parameters 6 6 0 + axx+ ayy + ... = A exp(iΩ) [ξ(x+ iy) + ζ(x− iy)] where |ξ|2 + |ζ|2 = 1 . – p.5/37 Vortex shape For isotropic (canonical) vortices: ξ = 1 and ζ = 0 → ν = +1 ξ = 0 and ζ = 1...

  3. Field Guide to Interferometric Optical Testing

    CERN Document Server

    Goodwin, Eric P

    2006-01-01

    A distillation of Dr. Wyant's course at the University of Arizona, this Field Guide covers the key fundamentals of interferometry, types of interferometers and interferograms, concepts of phase-shifting interferometry, long-wavelength interferometry, testing of aspheric surfaces, measurement of surface microstructure, flat and curved surface testing, and absolute measurements.

  4. Increased illumination uniformity and reduced photodamage offered by the Lissajous scanning in fiber-optic two-photon endomicroscopy.

    Science.gov (United States)

    Liang, Wenxuan; Murari, Kartikeya; Zhang, Yuying; Chen, Yongping; Li, Ming-Jun; Li, Xingde

    2012-02-01

    We compare the illumination uniformity and the associated effects of the spiral and Lissajous scanning patterns that are commonly used in an endomicroscope. Theoretical analyses and numerical simulations were first performed to quantitatively investigate the area illumination density in the spiral scanning pattern. The results revealed the potential problem of manifest photodamage due to the very high illumination density in the center of the spiral scan. Similar analyses of the Lissajous scanning pattern, which can be conveniently implemented on the same endomicroscope with no hardware modifications, showed a more uniform illumination density with about an 80-fold reduction in the peak illumination density. To underscore the benefit offered by the improved illumination uniformity, we conducted in vitro two-photon fluorescence imaging of cultured cells stained with a LIVE/DEAD viability assay using our home-built, fiber-optic, two-channel endomicroscopy system. Both the spiral and the Lissajous scans were implemented. Our experimental results showed that cells near the spiral scan center experienced obvious photodamage, whereas cells remained alive over the entire region under the Lissajous beam scanning, confirming the predicted advantage offered by the Lissajous scan over this spiral scan in an endomicroscopy setting.

  5. Three order increase in scanning speed of space charge-controlled KTN deflector by eliminating electric field induced phase transition in nanodisordered KTN

    Science.gov (United States)

    Zhu, Wenbin; Chao, Ju-Hung; Chen, Chang-Jiang; Yin, Shizhuo; Hoffman, Robert C.

    2016-01-01

    In this paper, we report a three orders-of-magnitude increase in the speed of a space-charge-controlled KTN beam deflector achieved by eliminating the electric field-induced phase transition (EFIPT) in a nanodisordered KTN crystal. Previously, to maximize the electro-optic effect, a KTN beam deflector was operated at a temperature slightly above the Curie temperature. The electric field could cause the KTN to undergo a phase transition from the paraelectric phase to the ferroelectric phase at this temperature, which causes the deflector to operate in the linear electro-optic regime. Since the deflection angle of the deflector is proportional to the space charge distribution but not the magnitude of the applied electric field, the scanning speed of the beam deflector is limited by the electron mobility within the KTN crystal. To overcome this speed limitation caused by the EFIPT, we propose to operate the deflector at a temperature above the critical end point. This results in a significant increase in the scanning speed from the microsecond to nanosecond regime, which represents a major technological advance in the field of fast speed beam scanners. This can be highly beneficial for many applications including high-speed imaging, broadband optical communications, and ultrafast laser display and printing. PMID:27610923

  6. Three order increase in scanning speed of space charge-controlled KTN deflector by eliminating electric field induced phase transition in nanodisordered KTN

    Science.gov (United States)

    Zhu, Wenbin; Chao, Ju-Hung; Chen, Chang-Jiang; Yin, Shizhuo; Hoffman, Robert C.

    2016-09-01

    In this paper, we report a three orders-of-magnitude increase in the speed of a space-charge-controlled KTN beam deflector achieved by eliminating the electric field-induced phase transition (EFIPT) in a nanodisordered KTN crystal. Previously, to maximize the electro-optic effect, a KTN beam deflector was operated at a temperature slightly above the Curie temperature. The electric field could cause the KTN to undergo a phase transition from the paraelectric phase to the ferroelectric phase at this temperature, which causes the deflector to operate in the linear electro-optic regime. Since the deflection angle of the deflector is proportional to the space charge distribution but not the magnitude of the applied electric field, the scanning speed of the beam deflector is limited by the electron mobility within the KTN crystal. To overcome this speed limitation caused by the EFIPT, we propose to operate the deflector at a temperature above the critical end point. This results in a significant increase in the scanning speed from the microsecond to nanosecond regime, which represents a major technological advance in the field of fast speed beam scanners. This can be highly beneficial for many applications including high-speed imaging, broadband optical communications, and ultrafast laser display and printing.

  7. Vectorial nanoscale mapping of optical antenna fields by single molecule dipoles.

    Science.gov (United States)

    Singh, Anshuman; Calbris, Gaëtan; van Hulst, Niek F

    2014-08-13

    Optical nanoantennas confine light on the nanoscale, enabling strong light-matter interactions and ultracompact optical devices. Such confined nanovolumes of light have nonzero field components in all directions (x, y, and z). Unfortunately mapping of the actual nanoscale field vectors has so far remained elusive, though antenna hotspots have been explored by several techniques. In this paper, we present a novel method to probe all three components of the local antenna field. To this end a resonant nanoantenna is fabricated at the vertex of a scanning tip. Next, the nanoantenna is deterministically scanned in close proximity to single fluorescent molecules, whose fixed excitation dipole moment reads out the local field vector. With nanometer molecular resolution, we distinctly map x-, y-, and z-field components of the dipole antenna, i.e. a full vectorial mode map, and show good agreement with full 3D FDTD simulations. Moreover, the fluorescence polarization maps the localized coupling, with emission through the longitudinal antenna mode. Finally, the resonant antenna probe is used for single molecule imaging with 40 nm fwhm response function. The total fluorescence enhancement is 7.6 times, while out-of-plane molecules, almost undetectable in far-field, are made visible by the strong antenna z-field with a fluorescence enhancement up to 100 times. Interestingly, the apparent position of molecules shifts up to 20 nm depending on their orientation. The capability to resolve orientational information on the single molecule level makes the scanning resonant antenna an ideal tool for extreme resolution bioimaging.

  8. Zero-field optical manipulation of magnetic ions in semiconductors.

    Science.gov (United States)

    Myers, R C; Mikkelsen, M H; Tang, J-M; Gossard, A C; Flatté, M E; Awschalom, D D

    2008-03-01

    Controlling and monitoring individual spins is desirable for building spin-based devices, as well as implementing quantum information processing schemes. As with trapped ions in cold gases, magnetic ions trapped on a semiconductor lattice have uniform properties and relatively long spin lifetimes. Furthermore, diluted magnetic moments in semiconductors can be strongly coupled to the surrounding host, permitting optical or electrical spin manipulation. Here we describe the zero-field optical manipulation of a few hundred manganese ions in a single gallium arsenide quantum well. Optically created mobile electron spins dynamically generate an energy splitting of the ion spins and enable magnetic moment orientation solely by changing either photon helicity or energy. These polarized manganese spins precess in a transverse field, enabling measurements of the spin lifetimes. As the magnetic ion concentration is reduced and the manganese spin lifetime increases, coherent optical control and readout of single manganese spins in gallium arsenide should be possible.

  9. Speckle Optical Tweezers: Micromanipulation with Random Light Fields

    CERN Document Server

    Volpe, Giorgio; Callegari, Agnese; Volpe, Giovanni; Gigan, Sylvain

    2014-01-01

    Current optical manipulation techniques rely on carefully engineered setups and samples. Although similar conditions are routinely met in research laboratories, it is still a challenge to manipulate microparticles when the environment is not well controlled and known a priori, since optical imperfections and scattering limit the applicability of this technique to real-life situations, such as in biomedical or microfluidic applications. Nonetheless, scattering of coherent light by disordered structures gives rise to speckles, random diffraction patterns with well-defined statistical properties. Here, we experimentally demonstrate how speckle fields can become a versatile tool to efficiently perform fundamental optical manipulation tasks such as trapping, guiding and sorting. We anticipate that the simplicity of these "speckle optical tweezers" will greatly broaden the perspectives of optical manipulation for real-life applications.

  10. Nonmydriatic ultra-wide-field scanning laser ophthalmoscopy (Optomap) versus two-field fundus photography in diabetic retinopathy.

    Science.gov (United States)

    Liegl, Raffael; Liegl, Kristine; Ceklic, Lala; Haritoglou, Christos; Kampik, Anselm; Ulbig, Michael W; Kernt, Marcus; Neubauer, Aljoscha S

    2014-01-01

    The purpose of this study was to investigate the diagnostic properties of a 2-laser wavelength nonmydriatic 200° ultra-wide-field scanning laser ophthalmoscope (SLO) versus mydriatic 2-field 45° color fundus photography (EURODIAB standard) for assessing diabetic retinopathy (DR). A total of 143 consecutive eyes of patients with different levels of DR were graded regarding DR level and macular edema based on 2-field color photographs or 1 Optomap Panoramic 200 SLO image. All SLO images were nonmydriatic and all photographs mydriatic. Grading was performed masked to patient and clinical data. Based on photography, 20 eyes had no DR, 44 had mild, 18 moderate and 42 severe nonproliferative DR, and 19 eyes had proliferative DR. Overall correlation for grading DR level compared to Optomap SLO was moderate with kappa 0.54 (p photography need to be confirmed in further studies.

  11. Resolving phase information of the optical local density of state with scattering near-field probes

    Science.gov (United States)

    Prasad, R.; Vincent, R.

    2016-10-01

    We theoretically discuss the link between the phase measured using a scattering optical scanning near-field microscopy (s-SNOM) and the local density of optical states (LDOS). A remarkable result is that the LDOS information is directly included in the phase of the probe. Therefore by monitoring the spatial variation of the trans-scattering phase, we locally measure the phase modulation associated with the probe and the optical paths. We demonstrate numerically that a technique involving two-phase imaging of a sample with two different sized tips should allow to obtain the image the pLDOS. For this imaging method, numerical comparison with extinction probe measurement shows crucial qualitative and quantitative improvement.

  12. Microwave Spectroscopy of Superconductors with a Scanning Low Temperature Near-Field Microwave Microscope

    Science.gov (United States)

    Imtiaz, Atif; Anlage, Steven

    2001-03-01

    We have developed a new tool to study the microwave conductivity and other properties of superconductors: The Cryogenic scanning near-field microwave microscope integrated with STM feedback. This instrument allows localized spectroscopic measurements of these materials in a non-destructive way, at both low and high frequencies. We will discuss results that show it high spatial resolution on metal and superconducting films in the frequency range of 7-11 GHz and compare it to simultaneously-acquired topography of the surface using a scanning tunneling microscope. The high spatial resolution allows us to image the grains and grain boundaries in superconductors, while facilitating local spectroscopy. The instrument allows us to study the electronic properties from STM and the microwave spectroscopic properties of the materials from the microwave microscope simultaneously, and independently of each other. We will also discuss a model of the microscope, which gives a quantitative understanding of the frequency shift and Q, demonstrating that this microscope is qualitatively similar to our earlier version.^1 We shall present images of superconducting films in the critical state and discuss the possibility of imaging magnetic vortices at microwave frequencies. Reference: 1 [D.E.Steinhauer, C.P.vlahacos, S.K.Dutta, B.J.Feenstra, F.C.Wellstood, and Steven M.Anlage, "Quantitative Imaging of Sheet Resistance with a Scanning Near-Field Microwave Microscope," Appl. Phys. Lett. 72, 861 (1998)].

  13. Role of wide-field autofluorescence imaging and scanning laser ophthalmoscopy in differentiation of choroidal pigmented lesions

    Institute of Scientific and Technical Information of China (English)

    Lukas; Reznicek; Carmen; Stumpf; Florian; Seidensticker; Anselm; Kampik; Aljoscha; S; Neubauer; Marcus; Kernt

    2014-01-01

    ·AIM:Toevaluatethe diagnostic properties of wide-field fundus autofluorescence(FAF) scanning laser ophthalmoscope(SLO) imaging for differentiating choroidal pigmented lesions.·METHODS: A consecutive series of 139 patients were included, 101 had established choroidal melanoma with13 untreated lesions and 98 treated with radiotherapy.Thirty-eight had choroidal nevi. All patients underwent a full ophthalmological examination, undilated wide-field imaging, FAF and standardized US examination. FAF images and imaging characteristics from SLO were correlated with the structural findings in the two patient groups.·RESULTS: Mean FAF intensity of melanomas was significantly lower than the FAF of choroidal nevi. Only 1out of 38 included eyes with nevi touched the optic disc compared to 31 out of 101 eyes with melanomas. In 18 out of 101 melanomas subretinal fluid was seen at the pigmented lesion compared to none seen in eyes with confirmed choroidal nevi. In "green laser separation", a trend towards more mixed FAF appearance of melanomas compared to nevi was observed. The mean maximal and minimal transverse and longitudinal diameters of melanomas were significantly higher than those of nevi.·CONCLUSION: Wide-field SLO and FAF imaging may be an appropriate non-invasive diagnostic screening tool to differentiate benign from malign pigmented choroidal lesions.

  14. Optical correlation algorithm for reconstructing phase skeleton of complex optical fields for solving the phase problem

    DEFF Research Database (Denmark)

    Angelsky, O. V.; Gorsky, M. P.; Hanson, Steen Grüner;

    2014-01-01

    We propose an optical correlation algorithm illustrating a new general method for reconstructing the phase skeleton of complex optical fields from the measured two-dimensional intensity distribution. The core of the algorithm consists in locating the saddle points of the intensity distribution an...... and connecting such points into nets by the lines of intensity gradient that are closely associated with the equi-phase lines of the field. This algorithm provides a new partial solution to the inverse problem in optics commonly referred to as the phase problem....

  15. Terrestrial Laser Scanning and Structure from Motion teaching resources for undergraduate field education courses

    Science.gov (United States)

    Pratt-Sitaula, B. A.; Shervais, K.; Crosby, C. J.; Douglas, B. J.; Niemi, N. A.; Wang, G.; Charlevoix, D. J.

    2015-12-01

    Fieldwork is an integral part of the geosciences and there is a longstanding tradition of teaching field methods as part of the undergraduate curriculum. As new technology changes the ways in which we scientifically examine the Earth, and as workforce development demands evolve, there is growing interest in introducing these new technologies into field education courses. In collaboration with field education instructors, UNAVCO, the National Science Foundation's geodetic facility, has developed a module of teaching resources to integrate terrestrial lidar scanning into field courses. An NSF facility is well positioned to develop scalable resources that can then be distributed or adapted for broader implementation. The modules can also be accomplished using Structure from Motion methods in place of lidar scanning. Modules goals are for students to be able to: (A) design and conduct a complex TLS survey to address a geologic research question and (B) articulate the societal impetus for answering these research questions and identify why TLS is the appropriate method in some circumstances. The module is comprised of five units: (1) Introduction to survey design, (2) Stratigraphic section analysis, (3) Fault scarp analysis, (4) Geomorphic change detection, (5) Student-led survey design summative assessment. The modules, apart from the Introduction, are independent, thus select modules can be employed in a given field setting. Prototype module materials were developed from the last five years of UNAVCO support of undergraduate field courses. The current versions of the modules were tested in summer 2015 at the Indiana University and University of Michigan field camps. Results show that the majority of students are able to achieve the intended learning goals. Module materials are available on the UNAVCO Education and Community Engagement website.

  16. Optical calculation of potential fields for robotic path planning.

    Science.gov (United States)

    Reid, M B

    1994-02-10

    Experimental results of the optical calculation of potential-field maps suitable for mobile robot navigation are presented and described. The optical computation employs two write modes of a microchannel spatial light modulator. In one mode, written patterns expand spatially, and this characteristic is used to create an extended two-dimensional function representing the influence of the goal in a robot's workspace. Distinct obstacle patterns are written in a second, nonexpanding, mode. A model of the mechanisms determining microchannel spatial light modulator write-mode characteristics is developed and used to derive the optical calculation time for full potential-field maps. Field calculations at a few hertz are possible with current technology, and calculation time versus map size scales favorably in comparison with digital electronic computation.

  17. Sound field reconstruction based on the acousto-optic effect

    DEFF Research Database (Denmark)

    Torras Rosell, Antoni; Barrera Figueroa, Salvador; Jacobsen, Finn

    2011-01-01

    Acoustic measurements are usually carried out with transducers that interact mechanically with the sound field under investigation. The goal of this work is to employ a completely different measurement principle, the determination of sound pressure based on the interaction between sound and light......, namely the acousto-optic effect. When sound propagates through a medium, it gives rise to pressure fluctuations that change the instantaneous density of the medium. Under such circumstances, the speed of light is not constant, but changed by the acoustic field. This acousto-optic interaction can...... be measured with a laser Doppler vibrometer; furthermore, it can be exploited to characterize an arbitrary sound field using tomographic techniques. This paper briefly reviews the fundamental principles governing the acousto-optic effect in air, and presents an investigation of the tomographic reconstruction...

  18. Retinal nerve fiber layer thickness in subgroups of multiple sclerosis, measured by optical coherence tomography and scanning laser polarimetry

    NARCIS (Netherlands)

    T.A.M. Siepman (Theodora); M. Wefers Bettink-Remeijer (Marijke); R.Q. Hintzen (Rogier)

    2010-01-01

    textabstractOptical coherence tomography (OCT) and scanning laser polarimetry (GDx ECC) are non-invasive methods used to assess retinal nerve fiber layer (RNFL) thickness, which may be a reliable tool used to monitor axonal loss in multiple sclerosis (MS). The objectives of this study are (1) to com

  19. Ultrafast dark-field surface inspection with hybrid-dispersion laser scanning

    Science.gov (United States)

    Yazaki, Akio; Kim, Chanju; Chan, Jacky; Mahjoubfar, Ata; Goda, Keisuke; Watanabe, Masahiro; Jalali, Bahram

    2014-06-01

    High-speed surface inspection plays an important role in industrial manufacturing, safety monitoring, and quality control. It is desirable to go beyond the speed limitation of current technologies for reducing manufacturing costs and opening a new window onto a class of applications that require high-throughput sensing. Here, we report a high-speed dark-field surface inspector for detection of micrometer-sized surface defects that can travel at a record high speed as high as a few kilometers per second. This method is based on a modified time-stretch microscope that illuminates temporally and spatially dispersed laser pulses on the surface of a fast-moving object and detects scattered light from defects on the surface with a sensitive photodetector in a dark-field configuration. The inspector's ability to perform ultrafast dark-field surface inspection enables real-time identification of difficult-to-detect features on weakly reflecting surfaces and hence renders the method much more practical than in the previously demonstrated bright-field configuration. Consequently, our inspector provides nearly 1000 times higher scanning speed than conventional inspectors. To show our method's broad utility, we demonstrate real-time inspection of the surface of various objects (a non-reflective black film, transparent flexible film, and reflective hard disk) for detection of 10 μm or smaller defects on a moving target at 20 m/s within a scan width of 25 mm at a scan rate of 90.9 MHz. Our method holds promise for improving the cost and performance of organic light-emitting diode displays for next-generation smart phones, lithium-ion batteries for green electronics, and high-efficiency solar cells.

  20. Optical waveguide behavior of Se-doped and undoped CdS one-dimensional nanostructures using near-field optical microscopy

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao; LIU Dan; PAN Anlian; FANG Zheyu; HUANG Shan; ZHU Xing

    2009-01-01

    The optical waveguide behaviors of CdS and CdSxSe1-x nanostructures are studied using near-field optical microscopy. Optical measurements demonstrate that light may be guided on sub-wavelength scales along CdS nanoribbons in straight or bent structures. The photoluminescence (PL) spectra from nanoribbon emission using scanning near-field optical microscopy are analyzed under different inci-dent laser intensities. The PL spectra along Se-doped and undoped CdS nanoribbons at different propagation distances are investigated. Both the guided PL spectra of Se-doped and undoped CdS nanoribbons show red-shifts because of the band-edge absorption. Our results are useful for the de-velopment of new kinds of functional nano devices.

  1. Optical waveguide behavior of Se-doped and undoped CdS one-dimensional nanostructures using near-field optical microscopy

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The optical waveguide behaviors of CdS and CdSxSe1?x nanostructures are studied using near-field optical microscopy. Optical measurements demonstrate that light may be guided on sub-wavelength scales along CdS nanoribbons in straight or bent structures. The photoluminescence (PL) spectra from nanoribbon emission using scanning near-field optical microscopy are analyzed under different incident laser intensities. The PL spectra along Se-doped and undoped CdS nanoribbons at different propagation distances are investigated. Both the guided PL spectra of Se-doped and undoped CdS nanoribbons show red-shifts because of the band-edge absorption. Our results are useful for the development of new kinds of functional nano devices.

  2. Comparison of Optical Coherence Tomography and Scanning Laser Polarimetry Measurements in Patients with Multiple Sclerosis

    Science.gov (United States)

    Quelly, Amanda; Cheng, Han; Laron, Michal; Schiffman, Jade S.; Tang, Rosa A.

    2010-01-01

    Purpose To compare optical coherence tomography (OCT) and scanning laser polarimetry (GDx) measurements of the retinal nerve fiber layer (RNFL) in multiple sclerosis (MS) patients with and without optic neuritis (ON). Methods OCT and GDx were performed on 68 MS patients. Qualifying eyes were divided into two groups: 51 eyes with an ON history ≥ 6 months prior (ON eyes), and 65 eyes with no history of ON (non-ON eyes). Several GDx and OCT parameters and criteria were used to define an eye as abnormal, for example, GDx nerve fiber indicator (NFI) above 20 or 30, OCT average RNFL thickness and GDx temporal-superior-nasal-inferior-temporal average (TSNIT) below 5% or 1% of the instruments’ normative database. Agreement between OCT and GDx parameters was reported as percent of observed agreement, along with the AC1 statistic. Linear regression analyses were used to examine the relationship between OCT average RNFL thickness and GDx NFI and TSNIT. Results All OCT and GDx measurements showed significantly more RNFL damage in ON than in non-ON eyes. Agreement between OCT and GDx parameters ranged from 69–90% (AC1 0.37–0.81) in ON eyes, and 52–91% (AC1 = 0.21–0.90) in non-ON eyes. Best agreement was observed between OCT average RNFL thickness (P 30) in ON eyes (90%, AC1 = 0.81), and between OCT average RNFL thickness (P < 0.01) and GDx TSNIT average (P < 0.01) in non-ON eyes (91%, AC1 = 0.90). In ON eyes, the OCT average RNFL thickness showed good linear correlation with NFI (R2 = 0.69, P < 0.0001) and TSNIT (R2 = 0.55, P < 0.0001). Conclusions OCT and GDx show good agreement and can be useful in detecting RNFL loss in MS/ON eyes. PMID:20495500

  3. Nanoscale magnetic field mapping with a single spin scanning probe magnetometer

    Energy Technology Data Exchange (ETDEWEB)

    Rondin, L.; Tetienne, J.-P.; Spinicelli, P.; Roch, J.-F.; Jacques, V. [Laboratoire de Photonique Quantique et Moleculaire, Ecole Normale Superieure de Cachan and CNRS UMR 8537, 94235 Cachan Cedex (France); Dal Savio, C.; Karrai, K. [Attocube systems AG, Koeniginstrasse 11A RGB, Munich 80539 (Germany); Dantelle, G. [Laboratoire de Physique de la Matiere Condensee, Ecole Polytechnique and CNRS UMR 7643, 91128 Palaiseau (France); Thiaville, A.; Rohart, S. [Laboratoire de Physique des Solides, Universite Paris-Sud and CNRS UMR 8502, 91405 Orsay (France)

    2012-04-09

    We demonstrate quantitative magnetic field mapping with nanoscale resolution, by applying a lock-in technique on the electron spin resonance frequency of a single nitrogen-vacancy defect placed at the apex of an atomic force microscope tip. In addition, we report an all-optical magnetic imaging technique which is sensitive to large off-axis magnetic fields, thus extending the operation range of diamond-based magnetometry. Both techniques are illustrated by using a magnetic hard disk as a test sample. Owing to the non-perturbing and quantitative nature of the magnetic probe, this work should open up numerous perspectives in nanomagnetism and spintronics.

  4. Static terrestrial laser scanning of juvenile understory trees for field phenotyping

    Science.gov (United States)

    Wang, Huanhuan; Lin, Yi

    2014-11-01

    This study was to attempt the cutting-edge 3D remote sensing technique of static terrestrial laser scanning (TLS) for parametric 3D reconstruction of juvenile understory trees. The data for test was collected with a Leica HDS6100 TLS system in a single-scan way. The geometrical structures of juvenile understory trees are extracted by model fitting. Cones are used to model trunks and branches. Principal component analysis (PCA) is adopted to calculate their major axes. Coordinate transformation and orthogonal projection are used to estimate the parameters of the cones. Then, AutoCAD is utilized to simulate the morphological characteristics of the understory trees, and to add secondary branches and leaves in a random way. Comparison of the reference values and the estimated values gives the regression equation and shows that the proposed algorithm of extracting parameters is credible. The results have basically verified the applicability of TLS for field phenotyping of juvenile understory trees.

  5. Large optical field enhancement for nanotips with large opening angles

    CERN Document Server

    Thomas, Sebastian; Lemell, Christoph; Burgdörfer, Joachim; Hommelhoff, Peter

    2014-01-01

    We theoretically investigate optical near-fields at nanometric tips. We systematically study the dependence of field enhancement on the shape, size, and material of the tip. We confirm a strong dependence of the field enhancement factor on the radius of curvature. In addition, we find a remarkably strong increase of field enhancement with increasing opening angle of the nanotips. For gold and tungsten nanotips in the experimentally relevant parameter range (radius of curvature $\\geq 5\\,$nm at 800 nm laser wavelength), we obtain field enhancement factors of up to ${\\sim}35$ (Au) and ${\\sim}12$ (W) for wide opening angles. We confirm this strong dependence on the opening angle for many other materials studying the dependence of the field enhancement at nanotips on the dielectric response function. For dielectrics, the increase in field enhancement is traced back to the electrostatic force of the induced surface charge at the tip shank. For metals, the plasmonic response strongly increases the field enhancement ...

  6. Measurement of the Waveguide Near-field Optical Spot

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The characteristic of near-field spots is analyzed.The size of the near field and the heat response time of the hybrid record medium to overcome super paramagnetic effect are calculated based on the heat transfer theory. A novel measuring method for the diameter of near-field recording spot is also presented. Since the grain of the recording media is tiny enough,near-field optical lithography can be accomplished with the aid of atomic force microscope (AFM).The diameter of near-field recording spot can be obtained by specifically designed computer.So the relationship between the near-field recording spot diameter and the probe size of near-field recording system, the near field recording distance coupling between head and disc can be got.

  7. Scanning metallic nanosphere microscopy for vectorial profiling of optical focal spots.

    Science.gov (United States)

    Yi, Hui; Long, Jing; Li, Hongquan; He, Xiaolong; Yang, Tian

    2015-04-06

    Recent years have witnessed fast progress in the development of spatially variant states of polarization under high numerical aperture focusing, and intensive exploration of their applications. We report a vectorial, broadband, high contrast and subwavelength resolution method for focal spot profiling. In this experiment, a 100 nm diameter gold nanosphere on a silica aerogel substrate is raster scanned across the focal spots, and the orthogonal polarization components can be obtained simultaneously by measuring the scattering far field in a confocal manner. The metallic-nanosphere-on-aerogel structure ensures negligible distortion to the focal spots, low crosstalk between orthogonal polarization components (1/39 in experiment), and a low level background noise (1/80 of peak intensity in experiment), while high contrast imaging is not limited by the resonance bandwidth.

  8. Ordinary polarization singularities in three-dimensional optical fields.

    Science.gov (United States)

    Freund, Isaac

    2012-06-15

    In generic three-dimensional optical fields the canonical point polarization singularities are points of circular polarization, C points on C lines, and points of linear polarization, L points on L lines. These special points are surrounded by a sea of ordinary points. In planes oriented normal to the principle axes of the polarization ellipse at the point, every ordinary point is also a singularity, here an ordinary polarization singularity, or O point. Interactions between O points, between O points and C points, and between O points and L points are described that highlight the fact that a consistent description of optical fields containing C and L lines must include O points.

  9. Third-order nonlinear optical responses in derivatives of phenylhydrazone by Z-scan and optical limiting studies-influence of noble metal nanoparticles

    Science.gov (United States)

    Sudheesh, P.; Siji Narendran, N. K.; Chandrasekharan, K.

    2013-12-01

    Here we report a study on the third-order nonlinear optical properties of a new class of phenylhydrazones and the influence of silver and gold metal nanoparticles on their nonlinear response. Metal nanoparticles were prepared by laser ablation method. Single beam Z-scan technique with a 7 ns, 10 Hz Nd: YAG laser pulses at 532 nm were employed for the measurements. The compounds exhibit well optical limiting properties. Hence, these compounds are a promising class of materials for the optical device applications.

  10. Near-field optical microscopy and spectroscopy of few-layer black phosphorous

    Science.gov (United States)

    Frenzel, A. J.; Tran, S.; Hinton, J. P.; Sternbach, A. J.; Yang, J.; Gillgren, N.; Lau, C. N.; Basov, D. N.

    Few-layer black phosphorous is a recent addition to the family of two-dimensional (2D) materials which exhibits strongly anisotropic transport and optical properties due to its puckered honeycomb structure. It was recently predicted that this intrinsic anisotropy should manifest in the plasmon dispersion. Additionally, tuning layer number and carrier density can control the dispersion of these collective modes. Scanning near-field optical microscopy (SNOM) has been demonstrated as a powerful method to probe electronic properties, including propagating collective modes, in layered 2D materials. We used SNOM to investigate anisotropic carrier response in few-layer black phosphorous encapsulated by hexagonal boron nitride. In addition to exploring gate-voltage tunability of the electronic response, we demonstrate effective modulation of the near-field signal by ultrafast photoexcitation.

  11. Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope.

    Science.gov (United States)

    Wang, Peng; Behan, Gavin; Kirkland, Angus I; Nellist, Peter D; Cosgriff, Eireann C; D'Alfonso, Adrian J; Morgan, Andrew J; Allen, Leslie J; Hashimoto, Ayako; Takeguchi, Masaki; Mitsuishi, Kazutaka; Shimojo, Masayuki

    2011-06-01

    Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.

  12. Imaging of Active Microwave Devices at Cryogenic Temperatures using Scanning Near-Field Microwave Microscopy

    Science.gov (United States)

    Thanawalla, Ashfaq S.; Dutta, S. K.; Vlahacos, C. P.; Steinhauer, D. E.; Feenstra, B. J.; Anlage, Steven M.; Wellstood, F. C.

    1998-03-01

    The ability to image electric fields in operating microwave devices is interesting both from the fundamental point of view and for diagnostic purposes. To that end we have constructed a scanning near-field microwave microscope which uses an open-ended coaxial probe and operates at cryogenic temperatures.(For related publications see: C. P. Vlahacos, R. C. Black, S. M. Anlage, A. Amar and F. C. Wellstood, Appl. Phys. Lett. 69), 3274 (1996) and S. M. Anlage, C. P. Vlahacos, Sudeep Dutta and F. C. Wellstood, IEEE Trans. Appl. Supercond. 7, 3686 (1997). Using this system we have imaged electric fields generated by both normal metal and superconducting microstrip resonators at temperatures ranging from 77 K to 300 K. We will present images and discuss our results including observations of clear standing wave patterns at the fundamental resonant frequency and an increased quality factor of the resonators at low temperatures.

  13. Assessment of β-zone peripapillary atrophy by optical coherence tomography and scanning laser ophthalmoscopy imaging in glaucoma patients

    Directory of Open Access Journals (Sweden)

    Seidensticker F

    2014-06-01

    Full Text Available Florian Seidensticker,1,* Lukas Reznicek,2,* Thomas Mann,2 Irene Hübert,2 Anselm Kampik,2 Michael Ulbig,2 Christoph Hirneiss,2 Aljoscha S Neubauer,2 Marcus Kernt2 1Department of Ophthalmology, Hannover Medical School, Hannover, Germany; 2Department of Ophthalmology, Ludwig-Maximilians-University, Munich, Germany  *These authors have contributed equally to this work Purpose: To assess β-zone peripapillary atrophy (β-PPA using spectral domain optical coherence tomography (SD-OCT, scanning laser ophthalmoscopy (SLO, and fundus autofluorescence (FAF imaging in patients with primary open-angle glaucoma with advanced glaucomatous visual field defects. Methods: A consecutive, prospective series of 82 study eyes with primary open-angle glaucoma were included in this study. All study participants underwent a full ophthalmic examination followed by SD-OCT, wide-field SLO, and FAF imaging of the optic nerve head and the peripapillary region. Results: Eighty-four glaucomatous eyes were included in our prospective study. Correlation analyses for horizontally and vertically obtained β-PPA for all three imaging modalities (color SLO, FAF, and SD-OCT revealed highest correlations between FAF and color SLO (Pearson correlation coefficient: 0.904 [P<0.001] for horizontal β-PPA and 0.786 [P<0.001] for vertical β-PPA. Bland–Altman plotting revealed highest agreements between color SLO and FAF, with −2.1 pixels ±1.96 standard deviation (SD for horizontal β-PPA, SD: 10.5 pixels and 2.4 pixels ±1.96 SD for vertical β-PPA. Conclusion: β-PPA can be assessed using en-face SLO and cross-sectional SD-OCT imaging. Correlation analyses revealed highest correlations between color SLO and FAF imaging, while correlations between SLO and SD-OCT were weak. A more precise structural definition of β-PPA is needed. Keywords: fundus autofluorescence, FAF, OCT, SD-OCT, SLO, glaucomatous optic neuropathy

  14. Tuning of successively scanned two monolithic Vernier-tuned lasers and selective data sampling in optical comb swept source optical coherence tomography.

    Science.gov (United States)

    Choi, Dong-Hak; Yoshimura, Reiko; Ohbayashi, Kohji

    2013-01-01

    Monolithic Vernier tuned super-structure grating distributed Bragg reflector (SSG-DBR) lasers are expected to become one of the most promising sources for swept source optical coherence tomography (SS-OCT) with a long coherence length, reduced sensitivity roll-off, and potential capability for a very fast A-scan rate. However, previous implementations of the lasers suffer from four main problems: 1) frequencies deviate from the targeted values when scanned, 2) large amounts of noise appear associated with abrupt changes in injection currents, 3) optically aliased noise appears due to a long coherence length, and 4) the narrow wavelength coverage of a single chip limits resolution. We have developed a method of dynamical frequency tuning, a method of selective data sampling to eliminate current switching noise, an interferometer to reduce aliased noise, and an excess-noise-free connection of two serially scanned lasers to enhance resolution to solve these problems. An optical frequency comb SS-OCT system was achieved with a sensitivity of 124 dB and a dynamic range of 55-72 dB that depended on the depth at an A-scan rate of 3.1 kHz with a resolution of 15 μm by discretely scanning two SSG-DBR lasers, i.e., L-band (1.560-1.599 μm) and UL-band (1.598-1.640 μm). A few OCT images with excellent image penetration depth were obtained.

  15. Nonlinear optical field sensors in extreme electromagnetic and acoustic environments

    Science.gov (United States)

    Garzarella, Anthony; Wu, Dong Ho

    2014-03-01

    Sensors based on electro-optic (EO) and magneto-optic (MO) crystals measure external electric and magnetic fields through changes in birefringence which the fields induce on the nonlinear crystals. Due to their small size and all-dielectric structure, EO and MO sensors are ideal in environments involving very large electromagnetic powers. Conventional antennas and metallic probes not only present safety hazards, due to their metallic structure and the presence of large currents, but they can also perturb the very fields they intend to measure. In the case of railguns, the large electromagnetic signals are also accompanied by tremendous acoustic noise, which presents a noise background that the sensors must overcome. In this presentation, we describe extensive data obtained from fiber optic EO and MO sensors used in the railgun of the Naval Research Laboratory. Along with the field measurements obtained, we will describe the interactions between the acoustic noise and the nonlinear crystals (most notably, photoelastic effects), the noise equivalent fields they produce, and methods they could be suppressed through the optical and geometrical configurations of the sensor so that the signal to noise ratio can be maximized.

  16. Off-Resonant Third-Order Optical Nonlinearity of Au Nanoparticle Array by Femtosecond Z-scan Measurement

    Institute of Scientific and Technical Information of China (English)

    WANG Kai; LONG Hua; FU Ming; YANG Guang; LU Pei-Xiang

    2010-01-01

    @@ A periodic triangular-shaped Au nanoparticle array is fabricated on a quartz substrate using nanosphere lithography and pulled laser deposition,and the linear and nonlinear optical properties of metal particles are studied.The morphology of the polystyrene nanosphere mask(D=820 nm)and the A u nanoparticle array are investigated by scanning electron microscopy.The surface plasmon resonance absorption peak is observed at 606 nm,which is in good agreement with the calculated result using the discrete dipole approximation method.By performing the Z-scan method with femtosecond laser(800nm,50fs),the optical nonlinearities of Au nanoparticle array are determined.The results show that the Au particles exhibit negative nonlinear absorption and positive nonlinear refractive index with the effective third-order optical nonlinear susceptibility Xeff(3)can be up to(8.8±1.0)×10-10 esu under non-resonant femtosecond laser excitation.

  17. Line-scan Raman microscopy complements optical coherence tomography for tumor boundary detection

    Science.gov (United States)

    Sudheendran, Narendran; Qi, Ji; Young, Eric D.; Lazar, Alexander J.; Lev, Dina C.; Pollock, Raphael E.; Larin, Kirill V.; Shih, Wei-Chuan

    2014-10-01

    Current technique for tumor resection requires biopsy of the tumor region and histological confirmation before the surgeon can be certain that the entire tumor has been resected. This confirmation process is time consuming both for the surgeon and the patient and also requires sacrifice of healthy tissue, motivating the development of novel technologies which can enable real-time detection of tumor-healthy tissue boundary for faster and more efficient surgeries. In this study, the potential of combining structural information from optical coherence tomography (OCT) and molecular information from line-scan Raman microscopy (LSRM) for such an application is presented. The results show a clear presence of boundary between myxoid liposarcoma and normal fat which is easily identifiable both from structural and molecular information. In cases where structural images are indistinguishable, for example, in normal fat and well differentiated liposarcoma (WDLS) or gastrointestinal sarcoma tumor (GIST) and myxoma, distinct molecular spectra have been obtained. The results suggest LSRM can effectively complement OCT to tumor boundary demarcation with high specificity.

  18. High-resolution adaptive optics scanning laser ophthalmoscope with dual deformable mirrors for large aberration correction

    Energy Technology Data Exchange (ETDEWEB)

    Chen, D; Jones, S M; Silva, D A; Olivier, S S

    2007-01-25

    Scanning laser ophthalmoscopes with adaptive optics (AOSLO) have been shown previously to provide a noninvasive, cellular-scale view of the living human retina. However, the clinical utility of these systems has been limited by the available deformable mirror technology. In this paper, we demonstrate that the use of dual deformable mirrors can effectively compensate large aberrations in the human retina, making the AOSLO system a viable, non-invasive, high-resolution imaging tool for clinical diagnostics. We used a bimorph deformable mirror to correct low-order aberrations with relatively large amplitudes. The bimorph mirror is manufactured by Aoptix, Inc. with 37 elements and 18 {micro}m stroke in a 10 mm aperture. We used a MEMS deformable mirror to correct high-order aberrations with lower amplitudes. The MEMS mirror is manufactured by Boston Micromachine, Inc with 144 elements and 1.5 {micro}m stroke in a 3 mm aperture. We have achieved near diffraction-limited retina images using the dual deformable mirrors to correct large aberrations up to {+-} 3D of defocus and {+-} 3D of cylindrical aberrations with test subjects. This increases the range of spectacle corrections by the AO systems by a factor of 10, which is crucial for use in the clinical environment. This ability for large phase compensation can eliminate accurate refractive error fitting for the patients, which greatly improves the system ease of use and efficiency in the clinical environment.

  19. Optical detection of metastatic cancer cells using a scanned laser pico-projection system

    Science.gov (United States)

    Huang, Chih-Ling; Chiu, Wen-Tai; Lo, Yu-Lung; Chuang, Chin-Ho; Chen, Yu-Bin; Chang, Shu-Jing; Ke, Tung-Ting; Cheng, Hung-Chi; Wu, Hua-Lin

    2015-03-01

    Metastasis is responsible for 90% of all cancer-related deaths in humans. As a result, reliable techniques for detecting metastatic cells are urgently required. Although various techniques have been proposed for metastasis detection, they are generally capable of detecting metastatic cells only once migration has already occurred. Accordingly, the present study proposes an optical method for physical characterization of metastatic cancer cells using a scanned laser pico-projection system (SLPP). The validity of the proposed method is demonstrated using five pairs of cancer cell lines and two pairs of non-cancer cell lines treated by IPTG induction in order to mimic normal cells with an overexpression of oncogene. The results show that for all of the considered cell lines, the SLPP speckle contrast of the high-metastatic cells is significantly higher than that of the low-metastatic cells. As a result, the speckle contrast measurement provides a reliable means of distinguishing quantitatively between low- and high-metastatic cells of the same origin. Compared to existing metastasis detection methods, the proposed SLPP approach has many advantages, including a higher throughput, a lower cost, a larger sample size and a more reliable diagnostic performance. As a result, it provides a highly promising solution for physical characterization of metastatic cancer cells in vitro.

  20. Comparison of adaptive optics scanning light ophthalmoscopic fluorescein angiography and offset pinhole imaging.

    Science.gov (United States)

    Chui, Toco Y P; Dubow, Michael; Pinhas, Alexander; Shah, Nishit; Gan, Alexander; Weitz, Rishard; Sulai, Yusufu N; Dubra, Alfredo; Rosen, Richard B

    2014-04-01

    Recent advances to the adaptive optics scanning light ophthalmoscope (AOSLO) have enabled finer in vivo assessment of the human retinal microvasculature. AOSLO confocal reflectance imaging has been coupled with oral fluorescein angiography (FA), enabling simultaneous acquisition of structural and perfusion images. AOSLO offset pinhole (OP) imaging combined with motion contrast post-processing techniques, are able to create a similar set of structural and perfusion images without the use of exogenous contrast agent. In this study, we evaluate the similarities and differences of the structural and perfusion images obtained by either method, in healthy control subjects and in patients with retinal vasculopathy including hypertensive retinopathy, diabetic retinopathy, and retinal vein occlusion. Our results show that AOSLO OP motion contrast provides perfusion maps comparable to those obtained with AOSLO FA, while AOSLO OP reflectance images provide additional information such as vessel wall fine structure not as readily visible in AOSLO confocal reflectance images. AOSLO OP offers a non-invasive alternative to AOSLO FA without the need for any exogenous contrast agent.

  1. Resolution enhancement of digital laser scanning fluorescence microscopy with a dual-lens optical pickup head

    Science.gov (United States)

    Tsai, Rung-Ywan; Chen, Jung-Po; Lee, Yuan-Chin; Chiang, Hung-Chih; Huang, Tai-Ting; Huang, Chun-Chieh; Cheng, Chih-Ming; Cheng, Chung-Ta; Lo, Feng-Hsiang; Tiao, Golden

    2016-10-01

    The resolution of the cell fluorescence image captured by a digital laser scanning microscopy with a modified dual-lens BD-ROM optical pickup head is enhanced by image registration and double sample frequency. A dual objective lens of red (655 nm) and blue (405 or 488 nm) laser sources with numerical apertures of 0.6 and 0.85 is used for sample focusing and position tracking and cell fluorescence image capturing, respectively. The image registration and capturing frequency are based on the address-coded patterns of a sample slide. The address-coded patterns are designed as a string of binary code, which comprises a plurality of base-straight lands and grooves and data-straight grooves. The widths of the base-straight lands, base-straight grooves, and data-straight grooves are 0.38, 0.38, and 0.76 μm, respectively. The numbers of sample signals in the x-direction are measured at every intersection point by intersecting the base intensity of the push-pull signal of the address-coded patterns, which has a minimum spacing of 0.38 μm. After taking a double sample frequency, the resolution of the measured cell fluorescence image is enhanced from 0.38 μm to the diffraction limit of the objective lens.

  2. Feasibility of fiber optic displacement sensor scanning system for imaging of dental cavity

    Science.gov (United States)

    Rahman, Husna Abdul; Che Ani, Adi Izhar; Harun, Sulaiman Wadi; Yasin, Moh.; Apsari, Retna; Ahmad, Harith

    2012-07-01

    The purpose of this study is to investigate the potential of intensity modulated fiber optic displacement sensor scanning system for the imaging of dental cavity. Here, we discuss our preliminary results in the imaging of cavities on various teeth surfaces, as well as measurement of the diameter of the cavities which are represented by drilled holes on the teeth surfaces. Based on the analysis of displacement measurement, the sensitivities and linear range for the molar, canine, hybrid composite resin, and acrylic surfaces are obtained at 0.09667 mV/mm and 0.45 mm 0.775 mV/mm and 0.4 mm 0.5109 mV/mm and 0.5 mm and 0.25 mV/mm and 0.5 mm, respectively, with a good linearity of more than 99%. The results also show a clear distinction between the cavity and surrounding tooth region. The stability, simplicity of design, and low cost of fabrication make it suitable for restorative dentistry.

  3. Optical Characterization of Oligonucleotide DNA Influenced by Magnetic Fields

    Directory of Open Access Journals (Sweden)

    Seyedeh Maryam Banihashemian

    2013-09-01

    Full Text Available UV-VIS spectroscopic analysis of oligonucleotide DNA exposed to different magnetic fields was performed in order to investigate the relationship between DNA extinction coefficients and optical parameters according to magnetic-field strength. The results with the oligonucleotides adenine-thymine 100 mer (AT-100 DNA and cytosine-guanine 100 mer (CG-100 DNA indicate that the magnetic field influences DNA molar extinction coefficients and refractive indexes. The imaginary parts of the refractive index and molar extinction coefficients of the AT-100 and CG-100 DNA decreased after exposure to a magnetic field of 750 mT due to cleavage of the DNA oligonucleotides into smaller segments.

  4. Strong-field terahertz-optical mixing in excitons

    CERN Document Server

    Su, M Y; Sherwin, M S; Huntington, A S; Coldren, L A

    2002-01-01

    Driving a double-quantum-well excitonic intersubband resonance with a terahertz (THz) electric field of frequency \\omega_{THz} generated terahertz optical sidebands \\omega=\\omega_{THz}+\\omega_{NIR} on a weak NIR probe. At high THz intensities, the intersubband dipole energy which coupled two excitons was comparable to the THz photon energy. In this strong-field regime the sideband intensity displayed a non-monotonic dependence on the THz field strength. The oscillating refractive index which gives rise to the sidebands may be understood by the formation of Floquet states, which oscillate with the same periodicity as the driving THz field.

  5. Development of a scanning nearfield optical microscope for low-temperature investigations of semiconductor nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Hodeck, Kai Friedrich

    2009-02-19

    In the present work the electronic structure of MOCVD-grown InGaAs/GaAs and InAs/GaAs quantum dots which are characterized by a particularly low ground state transition energy, was investigated using Scanning Nearfield Optical Microscopy (SNOM). The pivotal question of the presented investigations is, which influence the interaction of the confined carriers has on the energy states of the biexcitons and the multiexcitons in a quantum dot. Therefore, photoluminescence spectra of single quantum dots were investigated under varying excitation intensity at different temperatures between 5 K and 300 K. The construction of a novel scanning nearfield microscope especially for low temperatures allowed the investigation of single quantum dots. Due to significant improvements of the positioning technology and the shear-force distance control between the sample and the nearfield probe a stable scanning of the quantum dot samples at 5 K could be demonstrated, showing a lateral optical resolution of 200 nm. This way, in the photoluminescence spectroscopy of single quantum dots the thermal linewidth broadening of the detected light was reduced down to a value of less than 1 meV, which allowed the identification of the transitions of biexcitons and multiexcitons. On the basis of the performed measurements, for the InGaAs/GaAs quantum dots a biexciton state was identified, with variable binding energies of 2-7 meV. Furthermore, a positively charged trion state with a binding energy of 11 meV was observed, showing high emission intensity, which can be assigned to the sample doping. Accordingly, for the positively charged biexciton state a binding energy of 11 meV can be announced. For the investigated InAs/GaAs quantum dots a biexciton state with binding energies of 3-4 meV was found. Some of the investigated InAs/GaAs quantum dots showed the formation of positively charged states, in particular of a trion state with a binding energy of 3 meV, and of the positively charged

  6. Neuroretinal rim in non-glaucomatous large optic nerve heads: a comparison of confocal scanning laser tomography and spectral domain optical coherence tomography.

    Science.gov (United States)

    Enders, Philip; Schaub, Friederike; Hermann, Manuel M; Cursiefen, Claus; Heindl, Ludwig M

    2017-02-01

    To compare margin-based rim area measurements from confocal scanning laser tomography (CSLT) with Bruch's membrane opening (BMO)-based measurements from spectral domain optical coherence tomography (SD-OCT) by analysis of a group of non-glaucomatous eyes with large optic discs, so-called macrodiscs (disc size >2.45 mm(2) in CSLT). Objective is to create a reference base for large optic nerve heads in SD-OCT diagnostics. 102 eyes received CSLT and SD-OCT measurements and clinical examination on the same day. Visual field testing confirmed absence of glaucomatous defects. Statistical and correlation analysis was performed for rim area by CSLT as well as retinal nerve fibre layer thickness (RNFLT) and BMO minimal rim width (BMO-MRW) by SD-OCT. Mean disc size in CSLT was 2.98±0.4 mm(2) (range 2.45-4.23), mean rim area of 1.55±0.4 mm(2). BMO area was 2.51±0.33 mm(2) (range 1.61-3.51), mean global RNFLT was 79.55±17.2 μm, mean global BMO-MRW was 234.84±48.3 μm. Correlation of BMO-MRW to global RNFLT was stronger (r=0.60, p<10(-5)) than correlation of CSLT rim area to global RNFLT (r=0.26, p=0.24). BMO-MRW and CSLT rim area correlated with r=0.59 (p<10(-5)). BMO-MRW and RNFLT significantly decreased with increasing age (p<0.001). Annual loss of BMO-MRW was 0.8 μm/year (R(2)=0.14, p<0.001), loss of RNFLT was 0.27 μm/year (R(2)=0.17, p=0.001). In large optic discs, BMO-MRW is thinner compared with normal-sized discs and correlates better than CSLT parameters with the RNFLT. An age-depended loss of BMO-MRW needs to be taken into account in evaluation of the neuroretinal rim. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  7. Separation of image-distortion sources and magnetic-field measurement in scanning electron microscope (SEM).

    Science.gov (United States)

    Płuska, Mariusz; Czerwinski, Andrzej; Ratajczak, Jacek; Katcki, Jerzy; Oskwarek, Lukasz; Rak, Remigiusz

    2009-01-01

    The electron-microscope image distortion generated by electromagnetic interference (EMI) is an important problem for accurate imaging in scanning electron microscopy (SEM). Available commercial solutions to this problem utilize sophisticated hardware for EMI detection and compensation. Their efficiency depends on the complexity of distortions influence on SEM system. Selection of a proper method for reduction of the distortions is crucial. The current investigations allowed for a separation of the distortions impact on several components of SEM system. A sum of signals from distortion sources causes wavy deformations of specimen shapes in SEM images. The separation of various reasons of the distortion is based on measurements of the periodic deformations of the images for different electron beam energies and working distances between the microscope final aperture and the specimen. Using the SEM images, a direct influence of alternating magnetic field on the electron beam was distinguished. Distortions of electric signals in the scanning block of SEM were also separated. The presented method separates the direct magnetic field influence on the electron beam below the SEM final aperture (in the chamber) from its influence above this aperture (in the electron column). It also allows for the measurement of magnetic field present inside the SEM chamber. The current investigations gave practical guidelines for selecting the most efficient solution for reduction of the distortions.

  8. Numerical study on scanning radiation acoustic field in formations generated from a borehole

    Institute of Scientific and Technical Information of China (English)

    CHE Xiaohua; ZHANG Hailan; QIAO Wenxiao; JU Xiaodong

    2005-01-01

    Numerical study on scanning radiation acoustic field in formations generated by linear phased array transmitters in a fluid-filled borehole is carried out using a real axis integration (RAI) method. The main lobe width of the acoustic beams and the incident angle on the borehole wall can be controlled by means of adjusting parameters, such as the element number and the delay time between the neighboring array elements of linear phased array transmitter. The steered angle of longitudinal waves generated in the formation satisfies the Snell's law for plane waves when the incident angle on the borehole wall is less than the first critical angle. When the lobe width of the acoustic beams is narrow and the steered angle is less than the first critical angle, the acoustic field in the formation can be approximately calculated given that the linear phased array is put in the formation without borehole. The technique of scanning radiation acoustic field can be applied to enhancing investigation resolution and signal-to-noise ratio in crosswell seismic survey and borehole acoustic reflection imaging.

  9. Novel Scanning Near-Field Microwave Microscopes Capable of Imaging Semiconductors and Metals

    Science.gov (United States)

    Imtiaz, Atif; Tselev, Alexander; Anlage, Steven

    2003-03-01

    To study novel physics in condensed matter and materials science, experimental techniques of probing the high frequency electrical properties of materials are limited in resolution to the wavelength of the incident electromagnetic wave. We report here a novel near-field microscope that is capable of operation at radio and microwave frequencies[1]. The spatial resolution is comparable to NSOM in the scanning capacitance mode of the microscope[2]. Our objective is to image materials contrast at microwave frequencies and improve the spatial resolution. The microscope is sensitive to losses in materials, and we will present evidence of sheet resistance contrast in a Boron-doped Silicon sample. These experiments are performed with two versions of the near-field microwave microscope: one has integrated STM-feedback for distance control and the second one maintains a constant frequency shift through Distance Following technique. We will discuss the data on these films in light of a transmission line and lumped element model of the microscope. The microscope is an attractive platform for measuring local losses and local nonlinear properties of a rich variety of semiconducting and correlated-electron materials. [1] D.E. Steinhauer, et.al, "Quantitative Imaging of Sheet Resistance with a Scanning Near-Field Microwave Microscope", Appl. Phys. Lett. 72, 861 (1998) [2] Atif Imtiaz and Steven M. Anlage, "A novel STM-assisted microwave microscope with capacitance and loss imaging capability", Ultramicroscopy (in press); cond-mat/0203540

  10. Large field of view computed laminography with the asymmetric rotational scanning geometry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    X-ray computed laminography(CL)is used in the fields of industrial inspection and medical imaging.It can provide the internal structure three-dimensional(3D)information of a region of the objects nondestructively.It is important to the clinical diagnosis and the quality control of flat objects like printed circuit boards,aircraft wings and satellite solar panels.With the restriction that the imaging region must be within the X-ray beam formed by the X-ray source and the detector,the imaging field of view of CL is limited by the size of detector.A new CL method with an asymmetric rotational cone-beam scanning geometry,called large field of view CL,is presented to overcome the existing disadvantage.It can extend the imaging region when the imaging spatial resolution keeps the same as that of the conventional CL.It can also improve the imaging spatial resolution when the imaging region keeps the same as that of the conventional CL.The asymmetric configuration can be achieved by offsetting the detector from the conventional symmetric configuration.It does not,however,require new detectors and X-ray source nor alter the scanning mechanical system.The filtered back-projection(FBP)reconstruction algorithm and the data truncation smoothing functions have been deduced to reconstruct the images directly from the data acquired with this asymmetric configuration.We performed numerical studies and experiments to demonstrate and validate the proposed approach. Results in these studies and experiments confirm that the proposed method can enlarge the imaging region and improve the spatial resolution.The proposed approach may find applications in the CL system with the rotational scanning geometry.

  11. A new method to detect and correct sample tilt in scanning transmission electron microscopy bright-field imaging.

    Science.gov (United States)

    Brown, H G; Ishikawa, R; Sánchez-Santolino, G; Lugg, N R; Ikuhara, Y; Allen, L J; Shibata, N

    2017-02-01

    Important properties of functional materials, such as ferroelectric shifts and octahedral distortions, are associated with displacements of the positions of lighter atoms in the unit cell. Annular bright-field scanning transmission electron microscopy is a good experimental method for investigating such phenomena due to its ability to image light and heavy atoms simultaneously. To map atomic positions at the required accuracy precise angular alignment of the sample with the microscope optical axis is necessary, since misalignment (tilt) of the specimen contributes to errors in position measurements of lighter elements in annular bright-field imaging. In this paper it is shown that it is possible to detect tilt with the aid of images recorded using a central bright-field detector placed within the inner radius of the annular bright-field detector. For a probe focus near the middle of the specimen the central bright-field image becomes especially sensitive to tilt and we demonstrate experimentally that misalignment can be detected with a precision of less than a milliradian, as we also confirm in simulation. Coma in the probe, an aberration that can be misidentified as tilt of the specimen, is also investigated and it is shown how the effects of coma and tilt can be differentiated. The effects of tilt may be offset to a large extent by shifting the diffraction plane detector an amount equivalent to the specimen tilt and we provide an experimental proof of principle of this using a segmented detector system. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Probing electric fields inside microfluidic channels during electroosmotic flow with fast-scan cyclic voltammetry.

    Science.gov (United States)

    Forry, Samuel P; Murray, Jacqueline R; Heien, Michael L A V; Locascio, Laurie E; Wightman, R Mark

    2004-09-01

    Fast-scan cyclic voltammetry (FSCV) at carbon-fiber microelectrodes was used in microfluidic channels. This method offers the advantage that it can resolve electroactive species not separated in the channel. In addition, this method provides a route to investigate the distribution of applied electrophoretic fields in microfluidic channels. To probe this, microelectrodes were inserted at various distances into channels and cyclic voltammograms recorded at 300 V/s were repeated at 0.1-s intervals. The use of a battery-powered laptop computer and potentiostat provided galvanic isolation between the applied electrophoretic field and the electrochemical measurements. In the absence of an external field, the peak potential for oxidation of the test solute, Ru(bpy)3(2+), was virtually unaltered by insertion of the microelectrode tip into the channel. When an electrophoretic field was applied, the peak potential for Ru(bpy)3(2+) oxidation shifted to more positive potentials in a manner that was directly proportional to the field in the channel. The shifts in peak potential observed with FSCV enabled direct compensation of the applied electrochemical potential. This approach was used to explore the electrophoretic field at the channel terminus. It was found to persist for more than 50 microm from the channel terminus. In addition, the degree of analyte dispersion was found to depend critically on the electrode position outside the channel.

  13. Near- and Far-Field Optical Response of Eccentric Nanoshells.

    Science.gov (United States)

    Peña-Rodríguez, Ovidio; Díaz-Núñez, Pablo; Rodríguez-Iglesias, Vladimir; Montaño-Priede, Luis; Rivera, Antonio; Pal, Umapada

    2017-12-01

    We study the optical response of eccentric nanoshells (i.e., spherical nanoparticles with an eccentric spherical inclusion) in the near and the far field through finite-difference time-domain simulations. Plasmon hybridization theory is used to explain the obtained results. The eccentricity generates a far-field optical spectrum with various plasmon peaks. The number, position, and width of the peaks depend on the core offset. Near-field enhancements in the surroundings of these structures are significantly larger than those obtained for equivalent concentric nanoshells and, more importantly, they are almost independent of the illumination conditions. This opens up the door for using eccentric nanoshells in applications requiring intense near-field enhancements.

  14. Scanning Kelvin probe microscopy on organic field-effect transistors during gate bias stress

    Science.gov (United States)

    Mathijssen, S. G. J.; Cölle, M.; Mank, A. J. G.; Kemerink, M.; Bobbert, P. A.; de Leeuw, D. M.

    2007-05-01

    The reliability of organic field-effect transistors is studied using both transport and scanning Kelvin probe microscopy measurements. A direct correlation between the current and potential of a p-type transistor is demonstrated. During gate bias stress, a decrease in current is observed, that is correlated with the increased curvature of the potential profile. After gate bias stress, the potential changes consistently in all operating regimes: the potential profile gets more convex, in accordance with the simultaneously observed shift in threshold voltage. The changes of the potential are attributed to positive immobile charges, which contribute to the potential, but not to the current.

  15. Magnetic liquids under high electric fields as optical diodes

    CERN Document Server

    Pereira, Jonas P; Smolyaninova, Vera N

    2016-01-01

    We show and give examples of how unidirectional propagation of light rays in the limit of geometric optics could arise in some magnetic fluids due to the magnetoelectric effect under weak DC magnetic fields and strong DC electric fields around half of their dielectric breakdown. For such liquids as kerosene and transformer oils, one-way propagation of light may occur for 30 nm diameter magnetic nanoparticles (e.g. cobalt) and concentrations of 2% or larger.

  16. High field optical nonlinearity and the Kramers-Kronig relations.

    Science.gov (United States)

    Wahlstrand, J K; Cheng, Y-H; Milchberg, H M

    2012-09-14

    The nonlinear optical response to high fields is absolutely measured for the noble gas atoms He, Ne, Ar, Kr, and Xe. We find that the response is quadratic in the laser field magnitude up to the ionization threshold of each gas. Its size and quadratic dependence are well predicted by a Kramers-Kronig analysis employing known ionization probabilities, and the results are consistent with calculations using the time-dependent Schrödinger equation.

  17. Magnetic liquids under high electric fields as broadband optical diodes

    Science.gov (United States)

    Pereira, Jonas P.; Smolyaninov, Igor I.; Smolyaninova, Vera N.

    2016-10-01

    We show that unidirectional propagation of light rays in the limit of geometric optics could arise in some magnetic fluids due to the magnetoelectric effect under weak DC magnetic fields and strong DC electric fields around half of their dielectric breakdown. For such liquids as kerosene and transformer oils, one-way propagation of light may occur for 30-nm-diameter magnetic nanoparticles (e.g., cobalt) and concentrations of 2 % or larger.

  18. Interconnection of polarization properties and coherence of optical fields.

    Science.gov (United States)

    Zenkova, Claudia Yu

    2014-04-01

    Theoretical and experimental approaches to diagnosing internal spin and orbital optical flows and the corresponding optical forces caused by these flows are offered. These approaches are based on the investigation of the motion of the particles tested in the formed optical field. The dependence of the above-mentioned forces upon the size and optical properties of the particles is demonstrated. The possibility of using kinematic values defining the motion dynamics of particles of the Rayleigh light scattering mechanism to make a quantitative assessment of the degree of coherence of mutually orthogonal waves that are linearly polarized in the incidence plane is demonstrated. The feasibility of using the above mentioned approach, its shortcomings, and its advantages over the interfering method for estimating the degree of coherence are analyzed.

  19. Photocurrent mapping of near-field optical antenna resonances

    KAUST Repository

    Barnard, Edward S.

    2011-08-21

    An increasing number of photonics applications make use of nanoscale optical antennas that exhibit a strong, resonant interaction with photons of a specific frequency. The resonant properties of such antennas are conventionally characterized by far-field light-scattering techniques. However, many applications require quantitative knowledge of the near-field behaviour, and existing local field measurement techniques provide only relative, rather than absolute, data. Here, we demonstrate a photodetector platform that uses a silicon-on-insulator substrate to spectrally and spatially map the absolute values of enhanced fields near any type of optical antenna by transducing local electric fields into photocurrent. We are able to quantify the resonant optical and materials properties of nanoscale (∼50nm) and wavelength-scale (∼1μm) metallic antennas as well as high-refractive-index semiconductor antennas. The data agree well with light-scattering measurements, full-field simulations and intuitive resonator models. © 2011 Macmillan Publishers Limited. All rights reserved.

  20. Electron optics simulation for designing carbon nanotube based field emission x-ray source

    Science.gov (United States)

    Sultana, Shabana

    In this dissertation, electron optics simulation for designing carbon nanotube (CNT) based field emission x-ray source for medical imaging applications will be presented. However, for design optimization of x-ray tubes accurate electron beam optics simulation is essential. To facilitate design of CNT x-ray sources a commercial 3D finite element software has been chosen for extensive simulation. The results show that a simplified model of uniform electron field emission from the cathode surface is not sufficient when compared to experimental measurements. This necessitated the development of a refined model to describe a macroscopic field emission CNT cathode for electron beam optics simulations. The model emulates the random distribution of CNTs and the associated variation of local field enhancement factor. The main parameter of the model has been derived empirically from the experimentally measured I-V characteristics of the CNT cathode. Simulation results based on this model agree well with experiments which include measurements of the transmission rate and focus spot size. The model provides a consistent simulation platform for optimization of electron beam optics in CNT x-ray source design. A systematic study of electron beam optics in CNT x-ray tubes led to the development of a new generation of compact x-ray source with multiple pixels. A micro focus field emission x-ray source with a variable focal spot size has been fully characterized and evaluated. It has been built and successfully integrated into micro-CT scanners which are capable of dynamic cardiac imaging of free-breathing small animals with high spatial and temporal resolutions. In addition a spatially distributed high power multi-beam x-ray source has also been designed and integrated into a stationary digital breast tomosynthesis (s-DBT) configuration. This system has the potential to reduce the total scan time to 4 seconds and yield superior image quality in breast imaging.

  1. Field weighting model for tracking-integrated optics

    Science.gov (United States)

    Wheelwright, Brian; Angel, Roger; Coughenour, Blake; Hammer, Kimberly; Geary, Andrew; Stalcup, Thomas

    2014-09-01

    The emergent field of tracking-integrated optics enables a potentially low cost concentrating photovoltaic (CPV) implementation, where single-axis module tracking is complemented by an additional degree of freedom within the module [1,2,3,4,5]. Gross module tracking can take on multiple configurations, the most common being rotation about a polar or horizontal North-South oriented axis. Polar-axis tracking achieves >95% sunlight collection compared to dual-axis tracking[6], leaving the tracking-integrated optics to compensate for +/-23.5° seasonal variations. The collection efficiency of N-S horizontal axis tracking is latitude-dependent, with ˜90% collection relative to dual-axis tracking at 32.2° latitude. Horizontal tracking at higher latitudes shifts an increasing burden to the tracking-integrated optics, which must operate between two incidence angle extremes: summer solstice sunrise/sunset to winter solstice noon. An important aspect of tracking-integrated lens design is choosing a suitable field weighting to appropriately account for annual DNI received at each angle of incidence. We present a field weighting model, generalized for polar or horizontal module tracking at any latitude, which shows excellent agreement with measured insolation data. This model is particularly helpful for the design of tracking-integrated optics for horizontally-tracked modules, where the correct field weighting is asymmetric and significantly biased away from the normal incidence.

  2. Stress engineering and the applications of inhomogeneously polarized optical fields

    Institute of Scientific and Technical Information of China (English)

    Thomas G. BROWN; Amber M. BECKLEY

    2013-01-01

    Spatial inhomogeneities in the polarization of a light field can show fascinating effects in focusing, propagation, illumination, and imaging. This paper provides examples of these effects and describes how deterministic stress on the periphery of an optical element can be used in fundamental studies of beam propagation, as well as applications such as polarimetry.

  3. Evolution of optical vortex distributions in stochastic vortex fields

    CSIR Research Space (South Africa)

    Roux, FS

    2011-01-01

    Full Text Available dipole,? Opt. Commun. 236, 433?440 (2004). [23] Dana, I. and Freund, I., ?Vortex-lattice wave fields,? Opt. Commun. . [24] Jenkins, R., Banerji, J., and Davies, A., ?The generation of optical vortices and shape preserving vortex arrays in hollow...

  4. Enhanced optical absorption and electric field resonance in diabolo metal bar optical antennas.

    Science.gov (United States)

    Pan, Zeyu; Guo, Junpeng

    2013-12-30

    Resonance behaviors of the fundamental resonance mode of diabolo metal bar optical antennas are investigated by using finite-difference time-domain (FDTD) numerical simulations and a dipole oscillator model. It is found that as the waist of the diabolo metal bar optical antenna is reduced, optical energy absorption cross section and near field enhancement at resonance increase significantly. Also reduction of the diabolo waist width causes red-shift of the resonant wavelengths in the spectra of absorption cross-section, scattering cross-section, and the near electric field. A dipole oscillator model including the self-inductance force is used to fit the FDTD numerical simulation results. The dipole oscillator model characterizes well the resonance behaviors of narrow waist diabolo metal bar optical antennas.

  5. On the Polarization of non-Guassian optical quantum field: higher-order optical-polarization

    CERN Document Server

    Singh, Ravi S

    2013-01-01

    Polarization of light signifies transversal, anisotropic and asymmetrical statistical property of electromagnetic radiation about direction of propagation. Traditionally, optical-polarization is characterized by Stokes theory susceptible to be insufficient in assessing polarization structure of optical quantum fields and, also, does not decipher twin characteristic polarization parameters (ratio of real amplitudes and difference in phases). An alternative way, in spirit of classical description of optical-polarization, is introduced which can be generalized to deal higher-order polarization of quantum light, particularly, prepared in non-Guassian Schrodinger Cat or Cat-like states and entangled bi-modal coherent states. On account of pseudo mono-modal or multi-modal nature of such optical quantum field, higher-order polarization is seen to be highly sensitive to the basis of description.

  6. Field Demonstration of Electro-Scan Defect Location Technology for Condition Assessment of Wastewater Collection Systems - Paper

    Science.gov (United States)

    A USEPA-sponsored field demonstration program was conducted to gather technically reliable cost and performance information on the electro-scan (FELL -41) pipeline condition assessment technology. Electro-scan technology can be used to estimate the magnitude and location of pote...

  7. Plastic optical fiber for wide field-of-view optical wireless receiver

    Science.gov (United States)

    Fallah, Hoorieh; Sterckx, Karel; Saengudomlert, Poompat; Mohammed, Waleed S.

    2016-10-01

    This paper demonstrates a working indoor optical wireless link for smart environment applications. The system utilizes a wide field-of-view (FOV) optical wireless receiver through cleaving the tip of large core plastic optical fibers (POFs) attached to the detector. The quality of the optical link is quantified through bit error rate (BER) measurements. The experimental results show a wide FOV with the uncoded BER in the order of 10-3 for transmission distances up to 35 cm when using two POFs for signal collection. The distance can be improved further by increasing the number of fibers. The transmitted signal format and how the BER measurement is achieved are discussed at length. In addition, details are provided for the design of the electronics to establish the optical wireless link.

  8. Real-Time Near-Field Terahertz Imaging with Atomic Optical Fluorescence

    CERN Document Server

    Wade, Christopher G; de Melo, Natalia R; Kondo, Jorge M; Adams, Charles S; Weatherill, Kevin J

    2016-01-01

    Terahertz (THz) near-field imaging is a flourishing discipline [1], with applications from fundamental studies of beam propagation [2,3] to the characterisation of metameterials [4,5] and waveguides [6,7]. Beating the diffraction limit typically involves rastering structures or detectors with length scale shorter than the radiation wavelength; in the THz domain this has been achieved using a number of techniques including scattering tips [8,9] and apertures [10]. Alternatively, mapping THz fields onto an optical wavelength and imaging the visible light removes the requirement for scanning a local probe, speeding up image collection times [11,12]. Here we report THz to optical conversion using a gas of highly excited `Rydberg' atoms. By collecting THz-induced optical fluorescence we demonstrate a real-time image of a THz standing wave and we use well-known atomic properties to calibrate the THz field strength. The mono-atomic gas does not distort the THz field and offers the potential to immerse structures wit...

  9. Spatial distribution of soil moisture in precision farming using integrated soil scanning and field telemetry data

    Science.gov (United States)

    Kalopesas, Charalampos; Galanis, George; Kalopesa, Eleni; Katsogiannos, Fotis; Kalafatis, Panagiotis; Bilas, George; Patakas, Aggelos; Zalidis, George

    2015-04-01

    Mapping the spatial variation of soil moisture content is a vital parameter for precision agriculture techniques. The aim of this study was to examine the correlation of soil moisture and conductivity (EC) data obtained through scanning techniques with field telemetry data and to spatially separate the field into discrete irrigation management zones. Using the Veris MSP3 model, geo-referenced data for electrical conductivity and organic matter preliminary maps were produced in a pilot kiwifruit field in Chrysoupoli, Kavala. Data from 15 stratified sampling points was used in order to produce the corresponding soil maps. Fusion of the Veris produced maps (OM, pH, ECa) resulted on the delineation of the field into three zones of specific management interest. An appropriate pedotransfer function was used in order to estimate a capacity soil indicator, the saturated volumetric water content (θs) for each zone, while the relationship between ECs and ECa was established for each zone. Validation of the uniformity of the three management zones was achieved by measuring specific electrical conductivity (ECs) along a transect in each zone and corresponding semivariograms for ECs within each zone. Near real-time data produced by a telemetric network consisting of soil moisture and electrical conductivity sensors, were used in order to integrate the temporal component of the specific management zones, enabling the calculation of time specific volumetric water contents on a 10 minute interval, an intensity soil indicator necessary to be incorporated to differentiate spatially the irrigation strategies for each zone. This study emphasizes the benefits yielded by fusing near real time telemetric data with soil scanning data and spatial interpolation techniques, enhancing the precision and validity of the desired results. Furthermore the use of telemetric data in combination with modern database management and geospatial software leads to timely produced operational results

  10. Quantitative Imaging of Surface Resistance and Electric Fields by Scanning Near-Field Microwave Microscopy (SNFiMM)^1

    Science.gov (United States)

    Feenstra, B. J.

    1998-03-01

    After a brief survey and an introduction to the field of microwave microscopy, our novel scanning near-field microwave microscope (SNFiMM) based on a resonant coaxial cable will be described. Using this system we have imaged dielectric and conducting properties and electromagnetic fields on length scales far smaller than the free space wavelength of the radiation.(C. P. Vlahacos, R. C. Black, S. M. Anlage, A. Amar, and F. C. Wellstood, Appl. Phys. Lett. 69), 3272 (1996). Some of the merits of SNFiMM are the simplicity of its construction, the broad frequency coverage, ranging from 0.15 to 50 GHz, and the ability to alternate easily between different modes (reflection, receiving, frequency following etc.). The versatility of the system will be illustrated through images of the absolute sheet resistance and absolute electric fields, measured on a μm length scale.(D. E. Steinhauer, C. P. Vlahacos, S. K. Dutta, F. C. Wellstood, and Steven M. Anlage, Appl. Phys. Lett 71), 1736 (1997). In addition, potential applications will be discussed, including the use of SNFiMM for the diagnostics of active microwave circuits, both at room and cryogenic temperatures.

  11. A proximal retarding field analyzer for scanning probe energy loss spectroscopy

    Science.gov (United States)

    Bauer, Karl; Murphy, Shane; Palmer, Richard E.

    2017-03-01

    A compact proximal retarding field analyzer for scanning probe energy loss spectroscopy measurements is described. Using the scanning tunneling microscope (STM) tip as a field emission (FE) electron source in conjunction with this analyzer, which is placed at a glancing angle to the surface plane, FE sample current and electron reflectivity imaging may be performed simultaneously. This is demonstrated in measurements of Ag nanostructures prepared on graphite by electron-beam lithography, where a material contrast of 13% is observed, with a lateral resolution of 25 nm, between the silver and graphite in electron reflectivity images. Topological contrast mechanisms such as edge enhancement and shadowing are also observed, giving rise to additional features in the electron reflectivity images. The same instrument configuration has been used to measure electron energy loss spectra on bare graphite, where the zero loss peak, π band plasmon loss peak and secondary electron peaks are observed. Using this simple and compact analyzer an STM, with sufficient open access to the tip-sample junction, may easily be augmented to provide simultaneous elemental and topographic mapping, supplementing STM image measurements with FE sample current and electron reflectivity images, as well as electron energy loss spectroscopy measurements, in the same instrument.

  12. Thirty per cent contrast in secondary-electron imaging by scanning field-emission microscopy.

    Science.gov (United States)

    Zanin, D A; De Pietro, L G; Peter, Q; Kostanyan, A; Cabrera, H; Vindigni, A; Bähler, Th; Pescia, D; Ramsperger, U

    2016-11-01

    We perform scanning tunnelling microscopy (STM) in a regime where primary electrons are field-emitted from the tip and excite secondary electrons out of the target-the scanning field-emission microscopy regime (SFM). In the SFM mode, a secondary-electron contrast as high as 30% is observed when imaging a monoatomic step between a clean W(110)- and an Fe-covered W(110)-terrace. This is a figure of contrast comparable to STM. The apparent width of the monoatomic step attains the 1 nm mark, i.e. it is only marginally worse than the corresponding width observed in STM. The origin of the unexpected strong contrast in SFM is the material dependence of the secondary-electron yield and not the dependence of the transported current on the tip-target distance, typical of STM: accordingly, we expect that a technology combining STM and SFM will highlight complementary aspects of a surface while simultaneously making electrons, selected with nanometre spatial precision, available to a macroscopic environment for further processing.

  13. J-aggregates on metal nanoparticles characterized through ultrafast spectroscopy and near-field optics.

    Science.gov (United States)

    Wiederrecht, Gary P; Wurtz, Gregory A; Im, Jin Seo; Hranisavljevic, Jasmina

    2004-01-01

    Illumination of metal nanoparticles at the plasmon resonance produces enhanced evanescent fields on the nanoparticles' surfaces. The unusual strength of the field makes it a target for exploring photoinduced phenomena at the nanoscale, if efficient functionalization or coating of the nanoparticle surface with appropriate chromophores is possible. One direction is to use cyanine dyes that form monolayers of J-aggregates on the surface of noble metal nanoparticle colloids. The unique, collective electronic properties of J-aggregates produce excitons with enormous extinction coefficients that are of interest for their efficient energy transfer, electron transfer, and nonlinear optical properties. In that vein, we report our results on time-resolved spectroscopy and near-field scanning optical microscopy (NSOM) of J-aggregate exciton dynamics on Ag and Au nanoparticle colloids. Ultrafast transient absorption studies show that J-aggregate exciton lifetimes on Ag nanoparticles are much longer than on Au nanoparticles, with a 300 ps lifetime that is two orders of magnitude longer than the electronic processes in the nanoparticles themselves. Complementary NSOM studies of the colloids show that fluorescence from the J-aggregates on the Ag nanoparticles is induced by the scanning probe. These results may be significant for improving the nanophotonic performance of hybrid materials for nanoscale applications.

  14. Magneto-optical color imaging of magnetic field distribution

    Directory of Open Access Journals (Sweden)

    Yosuke Nagakubo

    2017-05-01

    Full Text Available The magneto-optical (MO imaging technique allows magnetic field distributions to be observed in real-time. In this paper, we demonstrate a MO color imaging technique that allows quantitative values of magnetic fields to be determined by the naked eye. MO color imaging is realized using a MO imaging plate, which contains a bismuth-substituted iron garnet film. The imaging plate was prepared by the metal organic decomposition method, and a light source consisting of green and yellow light-emitting diodes or a white light-emitting diode. MO color imaging of the magnetic field distribution of a commercial ferrite magnet is demonstrated.

  15. Transmission and Distribution of Optical Field in Prism Coupler

    Energy Technology Data Exchange (ETDEWEB)

    Huang, C Q; Chen, M [College of Physics and Electronics Information, Hunan Institute of Science and Technology, Yueyang 414006 (China); Liu, J; Wan, Z M; Luo, Z M [College of Information and Communication Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China); Tian, P, E-mail: namecqh@yahoo.com.cn [College of Optoelectronic Science and Engineering, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074 (China)

    2011-02-01

    Transmission and distribution characteristics of optical field in prism coupler are studies, and the phase matching function of prism coupler is deduced based on coupled wave theory. It is shown that the stable light field distribution and mode pattern are determined by its own geometric and dielectric parameters, but have nothing to do with the categories of incident light sources. It is also found that the coupling effect would generate between waveguides through evanescent field. Our numerical simulation is based on the finite difference time domain method with perfectly matched layer absorbing boundary condition. The simulation program is compiled in MATLAB. The simulation results are analyzed carefully.

  16. Remote optical sensor system for E-field measurements

    Science.gov (United States)

    Heinzelmann, Robert; Stoehr, Andreas; Alder, Thomas; Kalinowski, D.; Schmidt, Manuel; Gross, Matthias; Jaeger, Dieter

    1998-12-01

    The concept of a remote optical sensor system for frequency selective electric field measurements will be presented. The system will be applicable to field measurement problems up to frequencies in the microwave regime. Additionally, it will provide minimum interference with the measured field, due to the optical fiber coupled sensor head. The electrooptic key components within the head of this sensor system are an array of photovoltaic cells and an electroabsorption waveguide modulator. Based on experimental results these components will be discussed and evaluated for the application within the sensor system. Furthermore, a novel fiber modulator coupling technique employing the monolithic integration of the device with InP V-grooves will be presented.

  17. Open-Loop Control in Quantum Optics: Two-Level Atom in Modulated Optical Field

    CERN Document Server

    Saifullah, Sergei

    2008-01-01

    The methods of mathematical control theory are widely used in the modern physics, but still they are less popular in quantum science. We will discuss the aspects of control theory, which are the most useful in applications to the real problems of quantum optics. We apply this technique to control the behavior of the two-level quantum particles (atoms) in the modulated external optical field in the frame of the so called "semi classical model", where quantum two-level atomic system (all other levels are neglected) interacts with classical electromagnetic field. In this paper we propose a simple model of feedforward (open-loop) control for the quantum particle system, which is a basement for further investigation of two-level quantum particle in the external one-dimensional optical field.

  18. Scanning Laser Polarimetry and Optical Coherence Tomography for Detection of Retinal Nerve Fiber Layer Defects

    Science.gov (United States)

    Oh, Jong-Hyun

    2009-01-01

    Purpose To compare the ability of scanning laser polarimetry with variable corneal compensation (GDx-VCC) and Stratus optical coherence tomography (OCT) to detect photographic retinal nerve fiber layer (RNFL) defects. Methods This retrospective cross-sectional study included 45 eyes of 45 consecutive glaucoma patients with RNFL defects in red-free fundus photographs. The superior and inferior temporal quadrants in each eye were included for data analysis separately. The location and presence of RNFL defects seen in red-free fundus photographs were compared with those seen in GDx-VCC deviation maps and OCT RNFL analysis maps for each quadrant. Results Of the 90 quadrants (45 eyes), 31 (34%) had no apparent RNFL defects, 29 (32%) had focal RNFL defects, and 30 (33%) had diffuse RNFL defects in red-free fundus photographs. The highest agreement between GDx-VCC and red-free photography was 73% when we defined GDx-VCC RNFL defects as a cluster of three or more color-coded squares (p<5%) along the traveling line of the retinal nerve fiber in the GDx-VCC deviation map (kappa value, 0.388; 95% confidence interval (CI), 0.195 to 0.582). The highest agreement between OCT and red-free photography was 85% (kappa value, 0.666; 95% CI, 0.506 to 0.825) when a value of 5% outside the normal limit for the OCT analysis map was used as a cut-off value for OCT RNFL defects. Conclusions According to the kappa values, the agreement between GDx-VCC deviation maps and red-free photography was poor, whereas the agreement between OCT analysis maps and red-free photography was good. PMID:19794943

  19. Semiautomated segmentation of the choroid in spectral-domain optical coherence tomography volume scans.

    Science.gov (United States)

    Hu, Zhihong; Wu, Xiaodong; Ouyang, Yanwei; Ouyang, Yanling; Sadda, Srinivas R

    2013-03-07

    Changes in the choroid, in particular its thickness, are believed to be of importance in the pathophysiology of a number of retinal diseases. The purpose of this study was to adapt the graph search algorithm to semiautomatically identify the choroidal layer in spectral-domain optical coherence tomography (SD-OCT) volume scans and compare its performance to manual delineation. A graph-based multistage segmentation approach was used to identify the choroid, defined as the layer between the outer border of the RPE band and the choroid-sclera junction. Thirty randomly chosen macular SD-OCT (1024 × 37 × 496 voxels, Heidelberg Spectralis) volumes were obtained from 20 healthy subjects and 10 subjects with non-neovascular AMD. The positions of the choroidal borders and resultant thickness were compared with consensus manual delineation performed by two graders. For consistency of the statistical analysis, the left eyes were horizontally flipped in the x-direction. The algorithm-defined position of the outer RPE border and choroid-sclera junction was consistent with the manual delineation, resulting in highly correlated choroidal thickness values with r = 0.91 to 0.93 for the healthy subjects and 0.94 for patients with non-neovascular AMD. Across all cases, the mean and absolute differences between the algorithm and manual segmentation for the outer RPE boundary was -0.74 ± 3.27 μm and 3.15 ± 3.07 μm; and for the choroid-sclera junction was -3.90 ± 15.93 μm and 21.39 ± 10.71 μm. Excellent agreement was observed between the algorithm and manual choroidal segmentation in both normal eyes and those with non-neovascular AMD. The choroid was thinner in AMD eyes. Semiautomated choroidal thickness calculation may be useful for large-scale quantitative studies of the choroid.

  20. Scanning laser polarimetry and optical coherence tomography for detection of retinal nerve fiber layer defects.

    Science.gov (United States)

    Oh, Jong-Hyun; Kim, Yong Yeon

    2009-09-01

    To compare the ability of scanning laser polarimetry with variable corneal compensation (GDx-VCC) and Stratus optical coherence tomography (OCT) to detect photographic retinal nerve fiber layer (RNFL) defects. This retrospective cross-sectional study included 45 eyes of 45 consecutive glaucoma patients with RNFL defects in red-free fundus photographs. The superior and inferior temporal quadrants in each eye were included for data analysis separately. The location and presence of RNFL defects seen in red-free fundus photographs were compared with those seen in GDx-VCC deviation maps and OCT RNFL analysis maps for each quadrant. Of the 90 quadrants (45 eyes), 31 (34%) had no apparent RNFL defects, 29 (32%) had focal RNFL defects, and 30 (33%) had diffuse RNFL defects in red-free fundus photographs. The highest agreement between GDx-VCC and red-free photography was 73% when we defined GDx-VCC RNFL defects as a cluster of three or more color-coded squares (p<5%) along the traveling line of the retinal nerve fiber in the GDx-VCC deviation map (kappa value, 0.388; 95% confidence interval (CI), 0.195 to 0.582). The highest agreement between OCT and red-free photography was 85% (kappa value, 0.666; 95% CI, 0.506 to 0.825) when a value of 5% outside the normal limit for the OCT analysis map was used as a cut-off value for OCT RNFL defects. According to the kappa values, the agreement between GDx-VCC deviation maps and red-free photography was poor, whereas the agreement between OCT analysis maps and red-free photography was good.

  1. The Subaru Deep Field: The Optical Imaging Data

    CERN Document Server

    Kashikawa, N; Yasuda, N; Ajiki, M; Akiyama, M; Ando, H; Aoki, K; Doi, M; Fujita, S S; Furusawa, H; Hayashino, T; Iwamuro, F; Iye, M; Karoji, H; Kobayashi, N; Kodaira, K; Kodama, T; Komiyama, Yu; Matsuda, Y; Miyazaki, S; Mizumoto, Y; Morokuma, T; Motohara, K; Murayama, T; Nagao, T; Nariai, K; Ohta, K; Okamura, S; Ouchi, M; Sasaki, T; Sato, Y; Sekiguchi, K; Shioya, Y; Tamura, H; Taniguchi, Y; Umemura, M; Yamada, T; Yoshida, M

    2004-01-01

    The Subaru Deep Field (SDF) project is a program of Subaru Observatory to carry out a deep galaxy survey over a blank field as large as 34'x27'. The program consists of very deep multi-band optical imaging, near infrared imaging for smaller portions of the field and follow-up optical spectroscopy. Major scientific goals of the project are to construct large samples of Lyman-break galaxies at z~4-5 and Lyman alpha emitters at z~5.7 and 6.6, and to make detailed studies these very high-redshift galaxy populations. In this paper, we describe the optical imaging observations and data reduction, presenting mosaicked images and object catalogs in seven bandpasses.The optical imaging was made through five broad-band filters, B, V, R, i', z', and two narrow-band filters, NB816 (lambda_c=8150A) and NB921 (lambda_c=9196A) with almost 10 hours long integrations for each band. The limiting magnitudes measured at 3-sigma on a 2" aperture are B=28.45, V=27.74, R=27.80, i'=27.43, z'=26.62, NB816=26.63, and NB921=26.54 in th...

  2. Optical Doppler tomography based on a field programmable gate array

    DEFF Research Database (Denmark)

    Larsen, Henning Engelbrecht; Nilsson, Ronnie Thorup; Thrane, Lars

    2008-01-01

    We report the design of and results obtained by using a field programmable gate array (FPGA) to digitally process optical Doppler tomography signals. The processor fits into the analog signal path in an existing optical coherence tomography setup. We demonstrate both Doppler frequency and envelope...... extraction using the Hilbert transform, all in a single FPGA. An FPGA implementation has certain advantages over general purpose digital signal processor (DSP) due to the fact that the processing elements operate in parallel as opposed to the DSP. which is primarily a sequential processor....

  3. Near-Field Optical control of Doughnut-Shaped Nanostructures

    CERN Document Server

    Dubrovkin, A M; Ortyl, E; Zielinska, S

    2014-01-01

    The application of a local near-field optical excitation can be used to control step-by-step the reshape of individual doughnut-shaped azopolymer nano-objects by varying the time of illumination demonstrating its promising performance as a functional nano-object. The possibility to provide both photoinduced reshaping opens a way to the fundamental study of size-dependent scaling laws of optical properties, photoinduced reshaping efficiency and nanoreactor or nanoresonator behavior at nanometer scale. As an example the nano-object is used to self-assembly polystyrene nanospheres in a supraball.

  4. Axial-Stereo 3-D Optical Metrology for Inner Profile of Pipes Using a Scanning Laser Endoscope.

    Science.gov (United States)

    Gong, Yuanzheng; Johnston, Richard S; Melville, C David; Seibel, Eric J

    As the rapid progress in the development of optoelectronic components and computational power, 3D optical metrology becomes more and more popular in manufacturing and quality control due to its flexibility and high speed. However, most of the optical metrology methods are limited to external surfaces. This paper proposed a new approach to measure tiny internal 3D surfaces with a scanning fiber endoscope and axial-stereo vision algorithm. A dense, accurate point cloud of internally machined threads was generated to compare with its corresponding X-ray 3D data as ground truth, and the quantification was analyzed by Iterative Closest Points algorithm.

  5. Near-field measurement of modal interference in optical nanofibers for sub-Angstrom radius sensitivity

    CERN Document Server

    Fatemi, Fredrik K; Solano, Pablo; Fenton, Eliot F; Beadie, Guy; Rolston, Steven L; Orozco, Luis A

    2016-01-01

    Optical nanofibers (ONF) of subwavelength dimensions confine light in modes with a strong evanescent field that can trap, probe, and manipulate nearby quantum systems. To measure the evanescent field and propagating modes, and to optimize ONF performance, a surface probe is desirable during fabrication. We demonstrate a nondestructive measurement of light propagation in ONFs by sampling the local evanescent field with a microfiber. This approach reveals the behavior of all propagating modes, and because the modal beat lengths in cylindrical waveguides depend strongly on radius, simultaneously provides exquisite sensitivity to the ONF radius. We show that our measured spatial frequencies provide a map of the average ONF radius (over a 600 micrometer window) along the 10 mm ONF waist with 40 picometer resolution and high signal-to-noise ratio. The measurements agree with scanning electron microscopy (SEM) to within SEM instrument resolution. This fast method is immune to polarization, intrinsic birefringence, m...

  6. Near-Field Fluorescence and Topography Characterization of a Single Nanometre Fluorophore by Apertureless Tip-Enhanced Scanning Near-Field Microscopy

    Institute of Scientific and Technical Information of China (English)

    WU Xiao-Bin; WANG Jia; XU Ji-Ying; WANG Rui; TIAN Qian; YU Jian-Yuan

    2007-01-01

    Tip-enhanced near-field fluorescence and topography characterization of a single nanometre fluorophore is conducted by using an apertureless scanning near-field microscopy system. A fluorophore with size 80nm is mapped with a spatial resolution of 10nm. The corresponding near-field fluorescence data shows significant signal enhancement due to the apertureless tip-enhanced effect. With the nanometre spatial resolution capability and nanometre local tip-enhanced effect, the apertureless tip-enhanced scanning near-field microscopy may be further used to characterize a single molecule by realizing the local near-field spectrum assignment corresponding to topography at nanometre scale.

  7. Nonlinear optical properties of natural laccaic acid dye studied using Z-scan technique

    CSIR Research Space (South Africa)

    Zongo, S

    2015-08-01

    Full Text Available We have investigated the nonlinear optical properties, including the optical limiting behaviour for five different concentrations of laccaic acid dye in solution and a thin film obtained through doping in poly (methyl methacrylate) (PMMA) polymer...

  8. Femtosecond terahertz time-domain spectroscopy at 36 kHz scan rate using an acousto-optic delay

    Science.gov (United States)

    Urbanek, B.; Möller, M.; Eisele, M.; Baierl, S.; Kaplan, D.; Lange, C.; Huber, R.

    2016-03-01

    We present a rapid-scan, time-domain terahertz spectrometer employing femtosecond Er:fiber technology and an acousto-optic delay with attosecond precision, enabling scanning of terahertz transients over a 12.4-ps time window at a waveform refresh rate of 36 kHz, and a signal-to-noise ratio of 1.7 × 105 / √{ H z } . Our approach enables real-time monitoring of dynamic THz processes at unprecedented speeds, which we demonstrate through rapid 2D thickness mapping of a spinning teflon disc at a precision of 10 nm/ √{ H z } . The compact, all-optical design ensures alignment-free operation even in harsh environments.

  9. Femtosecond THz time domain spectroscopy at 36 kHz scan rate using an acousto-optic delay

    CERN Document Server

    Urbanek, B; Eisele, M; Baierl, S; Kaplan, D; Lange, C; Huber, R

    2016-01-01

    We present a rapid-scan, time-domain terahertz spectrometer employing femtosecond Er:fiber technology and an acousto-optic delay with attosecond precision, enabling scanning of terahertz transients over a 12.4 ps time window at a waveform refresh rate of 36 kHz, and a signal-to-noise ratio of $1.7 \\times 10^5/\\sqrt{\\rm Hz}$. Our approach enables real-time monitoring of dynamic THz processes at unprecedented speeds, which we demonstrate through rapid 2D thickness mapping of a spinning teflon disc at a precision of $10\\,\\rm nm/\\sqrt{\\rm Hz}$. The compact, all-optical design ensures alignment-free operation even in harsh environments.

  10. Optical properties of the cirrus cloud ice crystals with preferred azimuthal orientation for polarization lidars with azimuthal scanning

    Science.gov (United States)

    Konoshonkin, Alexander V.; Kustova, Natalia V.; Nasonov, Sergey V.; Bryukhanov, Ilia D.; Shishko, Viktor A.; Timofeev, Dmitriy N.; Borovoi, Anatoly G.

    2016-10-01

    Optical properties of the cirrus cloud ice crystals with preferred azimuthal orientation are required for current numerical models of the Earth's radiation balance. Retrieving the orientation distributions function of the crystals from a vertically pointing polarization lidar measuring the full Mueller matrix is a very complicated problem because of lake of information. Lidars with zenith scanning can be used only to retrieve the properties of horizontally oriented particles. The paper shows that if the particles have preferred azimuthal orientation, the polarization lidars with azimuthal scanning should be used. It is also shown that all the elements of the Mueller matrix give no extra information compare to the depolarization ratio. Optical properties of preferred azimuthal oriented hexagonal ice columns with size from 10 to 1000 μm for wavelengths of 0.355, 0.532 and 1.064 μm were collected as a data bank.

  11. Near-field optics and quantum optics: an assignation arranged by four kinds of photons.

    Science.gov (United States)

    Keller, O

    2003-03-01

    In the process of emergence a photon emitted from an atom (or a molecule) is usually no better localized in space than to the near-field zone of the source. Near-field optics therefore is of central importance for understanding fundamental statistical aspects related to single-photon tunnelling, the space-time description of photon dynamics, and the photon position-operator problem. In the present work an attempt is made to study the microscopic near-field optical interaction from a quantum statistical point of view. In near-field quantum electrodynamics (QED) scalar and longitudinal photons always are involved and this makes the covariant formulation of QED attractive also in the low-energy regime. We show that the Lorenz gauge condition on the global state vector relates to the near-field electrodynamics of the d-photons. The gauge photon is shown to be of no importance in near-field interactions. To understand the role of the lack of photon localizability we finally study near-field quantum optical correlations in a new so-called propagator gauge.

  12. Imaging properties of bright-field and annular-dark-field scanning confocal electron microscopy: II. Point spread function analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mitsuishi, K., E-mail: Mitsuishi.Kazutaka@nims.go.jp [Surface Physics and Structure Unit, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Hashimoto, A.; Takeguchi, M. [Surface Physics and Structure Unit, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); Shimojo, M. [Department of Materials Science and Engineering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 135-8548 (Japan); Ishizuka, K. [Surface Physics and Structure Unit, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba 305-0047 (Japan); HREM Research Inc., 14-48 Matsukazedai, Higashimatsuyama, Saitama 355-0055 (Japan)

    2012-01-15

    The imaging properties of bright field and annular dark field scanning confocal electron microscopy (BF-SCEM and ADF-SCEM) are discussed based on their point spread functions (PSFs) in comparison with multislice simulations. Although the PSFs of BF-SCEM and ADF-SCEM show similar hourglass shapes, their numerical distributions are quite different: BF-SCEM PSF is always positive and shows a center of symmetry whereas the ADF-SCEM PSF is complex and has Hermitian symmetry. These PSF properties explain the large elongation effect in BF-SCEM for laterally extended object and almost no-elongation in ADF-SCEM, illustrating the importance of the numerical analysis of PSFs. The Hermitian symmetry of the ADF-SCEM PSF results in an interesting 'edge enhancement effect' at the interface. Simulation using the PSF and the multislice method verified this effect at GaAs surfaces and InAs interfaces embedded in GaAs. This unique feature of ADF-SCEM can potentially be useful for depth sectioning. It is also pointed out that a PSF imaging model cannot be applicable for BF-SCEM of a phase object, when the system is symmetric and aberration free. -- Highlights: Black-Right-Pointing-Pointer The properties of scanning confocal electron microscopy (SCEM) are discussed by PSF. Black-Right-Pointing-Pointer The PSFs of BF- and ADF-SCEM show similar shapes, but values are quite different. Black-Right-Pointing-Pointer This explains the large elongation effect in BF and no-elongation in ADF. Black-Right-Pointing-Pointer The ADF-SCEM PSF shows 'edge enhancement effect' that is useful for depth sectioning.

  13. Bragg-Fresnel optics: New field of applications

    Energy Technology Data Exchange (ETDEWEB)

    Snigirev, A. [ESRF, Grenoble (France)

    1997-02-01

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 10{sup 8}-10{sup 9} photons/sec in an energy bandwidth of 10{sup -4}-10{sup -6} and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging.

  14. Optical Properties of Graphene in Magnetic and Electric fields

    CERN Document Server

    Lin, Chiun-Yan; Huang, Yao-Kung; Lin, Ming-Fa

    2016-01-01

    Optical properties of graphene are explored by using the generalized tight-binding model. The main features of spectral structures, the form, frequency, number and intensity, are greatly enriched by the complex relationship among the interlayer atomic interactions, the magnetic quantization and the Coulomb potential energy. Absorption spectra have the shoulders, asymmetric peaks and logarithmic peaks, coming from the band-edge states of parabolic dispersions, the constant-energy loops and the saddle points, respectively. The initial forbidden excitation region is only revealed in even-layer AA stacking systems. Optical gaps and special structures can be generated by an electric field. The delta-function-like structures in magneto-optical spectra, which present the single, twin and double peaks, are associated with the symmetric, asymmetric and splitting Landau-level energy spectra, respectively. The single peaks due to the non-tilted Dirac cones exhibit the nearly uniform intensity. The AAB stacking possesses...

  15. Atomic-Scale Confinement of Resonant Optical Fields

    Science.gov (United States)

    Kern, Johannes; Großmann, Swen; Tarakina, Nadezda V.; Häckel, Tim; Emmerling, Monika; Kamp, Martin; Huang, Jer-Shing; Biagioni, Paolo; Prangsma, Jord C.; Hecht, Bert

    2012-11-01

    In the presence of matter there is no fundamental limit preventing confinement of visible light even down to atomic scales. Achieving such confinement and the corresponding intensity enhancement inevitably requires simultaneous control over atomic-scale details of material structures and over the optical modes that such structures support. By means of self-assembly we have obtained side-by-side aligned gold nanorod dimers with robust atomically-defined gaps reaching below 0.5 nm. The existence of atomically-confined light fields in these gaps is demonstrated by observing extreme Coulomb splitting of corresponding symmetric and anti-symmetric dimer eigenmodes of more than 800 meV in white-light scattering experiments. Our results open new perspectives for atomically-resolved spectroscopic imaging, deeply nonlinear optics, ultra-sensing, cavity optomechanics as well as for the realization of novel quantum-optical devices.

  16. Near-Field, On-Chip Optical Brownian Ratchets.

    Science.gov (United States)

    Wu, Shao-Hua; Huang, Ningfeng; Jaquay, Eric; Povinelli, Michelle L

    2016-08-10

    Nanoparticles in aqueous solution are subject to collisions with solvent molecules, resulting in random, Brownian motion. By breaking the spatiotemporal symmetry of the system, the motion can be rectified. In nature, Brownian ratchets leverage thermal fluctuations to provide directional motion of proteins and enzymes. In man-made systems, Brownian ratchets have been used for nanoparticle sorting and manipulation. Implementations based on optical traps provide a high degree of tunability along with precise spatiotemporal control. Here, we demonstrate an optical Brownian ratchet based on the near-field traps of an asymmetrically patterned photonic crystal. The system yields over 25 times greater trap stiffness than conventional optical tweezers. Our technique opens up new possibilities for particle manipulation in a microfluidic, lab-on-chip environment.

  17. Brighter near-field optical probes by means of improving the optical destruction threshold.

    Science.gov (United States)

    Stöckle, R M; Schaller, N; Deckert, V; Fokas, C; Zenobi, R

    1999-01-01

    The optical destruction thresholds of conventionally etched and tube-etched near-field optical probes were measured. One of the main advantages of tube-etched tips is their smooth glass surface after taper formation. Presumably for this reason, a destruction limit of over 120 microJ was obtained, almost twice as large as that of the rougher, conventionally etched fibre probes. The use of additional adhesion layers (Ti. Cr, Co and Ni) between the glass surface and the aluminium coating produced, especially for tube-etched tips, a significant increase in the optical destruction threshold. With increasingly thin metal coatings, the use of a protection coating that prevents corrosion during aging is recommended. An additional increase in optical stability was achieved by applying mixed-metal coatings: alternating thin titanium and thick aluminium layers yielded fibre probes with superior properties that achieved average optical destruction thresholds of > 270 microJ. This is an increase in stability of > 400% compared with conventionally fabricated near-field optical tips.

  18. En-face full-field optical coherence tomography for fast and efficient fingerprints acquisition

    Science.gov (United States)

    Harms, Fabrice; Dalimier, Eugénie; Boccara, A. Claude

    2014-05-01

    Optical coherence tomography (OCT) has been recently proposed by a number of laboratories as a promising tool for fingerprints acquisitions and for fakes discrimination. Indeed OCT being a non-contact, non-destructive optical method that virtually sections the volume of biological tissues that strongly scatter light it appears obvious to use it for fingerprints. Nevertheless most of the OCT setups have to go through the long acquisition of a full 3D image to isolate an "en-face" image suitable for fingerprint analysis. A few "en-face" OCT approaches have been proposed that use either a complex 2D scanning setup and image processing, or a full-field illumination using a camera and a spatially coherent source that induces crosstalks and degrades the image quality. We show here that Full Field OCT (FFOCT) using a spatially incoherent source is able to provide "en-face" high quality optical sectioning of the fingers skin. Indeed such approach shows a unique spatial resolution able to reveal a number of morphological details of fingerprints that are not seen with competing OCT setups. In particular the cellular structure of the stratum corneum and the epidermis-dermis interface appear clearly. We describe our high-resolution (1 micrometer, isotropic) setup and show our first design to get a large field of view while keeping a good sectioning ability of about 3 micrometers. We display the results obtained using these two setups for fingerprints examination.

  19. Innovations of wide-field optical-sectioning fluorescence microscopy: toward high-speed volumetric bio-imaging with simplicity

    Science.gov (United States)

    Yu, Jiun-Yann

    Optical microscopy has become an indispensable tool for biological researches since its invention, mostly owing to its sub-cellular spatial resolutions, non-invasiveness, instrumental simplicity, and the intuitive observations it provides. Nonetheless, obtaining reliable, quantitative spatial information from conventional wide-field optical microscopy is not always intuitive as it appears to be. This is because in the acquired images of optical microscopy the information about out-of-focus regions is spatially blurred and mixed with in-focus information. In other words, conventional wide-field optical microscopy transforms the three-dimensional spatial information, or volumetric information about the objects into a two-dimensional form in each acquired image, and therefore distorts the spatial information about the object. Several fluorescence holography-based methods have demonstrated the ability to obtain three-dimensional information about the objects, but these methods generally rely on decomposing stereoscopic visualizations to extract volumetric information and are unable to resolve complex 3-dimensional structures such as a multi-layer sphere. The concept of optical-sectioning techniques, on the other hand, is to detect only two-dimensional information about an object at each acquisition. Specifically, each image obtained by optical-sectioning techniques contains mainly the information about an optically thin layer inside the object, as if only a thin histological section is being observed at a time. Using such a methodology, obtaining undistorted volumetric information about the object simply requires taking images of the object at sequential depths. Among existing methods of obtaining volumetric information, the practicability of optical sectioning has made it the most commonly used and most powerful one in biological science. However, when applied to imaging living biological systems, conventional single-point-scanning optical-sectioning techniques often

  20. Near-field Microwave Scanning Probe Imaging of Conductivity Inhomogeneities in CVD Graphene

    Energy Technology Data Exchange (ETDEWEB)

    Tselev, Alexander [ORNL; Lavrik, Nickolay V [ORNL; Vlassiouk, Ivan V [ORNL; Briggs, Dayrl P [ORNL; Rutgers, Maarten [Asylum Research, Santa Barbara, CA; Proksch, Roger [Asylum Research, Santa Barbara, CA; Kalinin, Sergei V [ORNL

    2012-01-01

    We have performed near-field scanning microwave microscopy (SMM) of graphene grown by chemical vapor deposition. Due to the use of probe-sample capacitive coupling and a relatively high ac frequency of a few GHz, this scanning probe method allows mapping of local conductivity without a dedicated counter electrode, with a spatial resolution of about 50 nm. Here, the coupling was enabled by atomic layer deposition of alumina on top of graphene, which in turn enabled imaging both large-area films, as well as micron-sized islands, with a dynamic range covering a low sheet resistance of a metal film and a high resistance of highly disordered graphene. The structures of graphene grown on Ni films and Cu foils are explored, and the effects of growth conditions are elucidated. We present a simple general scheme for interpretation of the contrast in the SMM images of our graphene samples and other two-dimensional conductors, which is supported by extensive numerical finite-element modeling. We further demonstrate that combination of the SMM and numerical modeling allows quantitative information about the sheet resistance of graphene to be obtained, paving the pathway for characterization of graphene conductivity with a sub-100 nm special resolution.

  1. Field emission scanning electron microscopy (FE-SEM) as an approach for nanoparticle detection inside cells.

    Science.gov (United States)

    Havrdova, M; Polakova, K; Skopalik, J; Vujtek, M; Mokdad, A; Homolkova, M; Tucek, J; Nebesarova, J; Zboril, R

    2014-12-01

    When developing new nanoparticles for bio-applications, it is important to fully characterize the nanoparticle's behavior in biological systems. The most common techniques employed for mapping nanoparticles inside cells include transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). These techniques entail passing an electron beam through a thin specimen. STEM or TEM imaging is often used for the detection of nanoparticles inside cellular organelles. However, lengthy sample preparation is required (i.e., fixation, dehydration, drying, resin embedding, and cutting). In the present work, a new matrix (FTO glass) for biological samples was used and characterized by field emission scanning electron microscopy (FE-SEM) to generate images comparable to those obtained by TEM. Using FE-SEM, nanoparticle images were acquired inside endo/lysosomes without disruption of the cellular shape. Furthermore, the initial steps of nanoparticle incorporation into the cells were captured. In addition, the conductive FTO glass endowed the sample with high stability under the required accelerating voltage. Owing to these features of the sample, further analyses could be performed (material contrast and energy-dispersive X-ray spectroscopy (EDS)), which confirmed the presence of nanoparticles inside the cells. The results showed that FE-SEM can enable detailed characterization of nanoparticles in endosomes without the need for contrast staining or metal coating of the sample. Images showing the intracellular distribution of nanoparticles together with cellular morphology can give important information on the biocompatibility and demonstrate the potential of nanoparticle utilization in medicine.

  2. Interaction of aerosol particles with a standing wave optical field

    Science.gov (United States)

    Curry, John J.

    2016-09-01

    Trajectories of spherical dielectric particles carried across an optical standing wave by a flowing medium are investigated. Trajectories are determined by a three-dimensional Monte Carlo calculation that includes drag forces, Brownian motion, and optical gradient forces. We analyze the case of polystyrene particles with radii of order 100 nm carried across a Gaussian-mode standing wave by slowly flowing air. Particles are injected into the flowing air from a small source area such as the end of a capillary tube. Different sizes are dispersed continuously in space on the opposite side of the standing wave, demonstrating a practical way to sort particles. Certain discrete values of particle size show no interaction with the optical field, independent of intensity. These particles can be sorted with exceptionally high resolution. For example, particles with radii of 275 nm can be sorted with 1 nm resolution. This sorting scheme has the advantages of accommodating a high throughput, producing a continuous stream of continuously dispersed particles, and exhibiting excellent size resolution. The Monte Carlo results are in agreement with those obtained by a much simpler, and faster, fluid calculation based on effective velocities and effective diffusion coefficients, both obtained by averaging trajectories over multiple fringes of the optical field.

  3. Tuning of successively scanned two monolithic Vernier-tuned lasers and selective data sampling in optical comb swept source optical coherence tomography

    Science.gov (United States)

    Choi, Dong-hak; Yoshimura, Reiko; Ohbayashi, Kohji

    2013-01-01

    Monolithic Vernier tuned super-structure grating distributed Bragg reflector (SSG-DBR) lasers are expected to become one of the most promising sources for swept source optical coherence tomography (SS-OCT) with a long coherence length, reduced sensitivity roll-off, and potential capability for a very fast A-scan rate. However, previous implementations of the lasers suffer from four main problems: 1) frequencies deviate from the targeted values when scanned, 2) large amounts of noise appear associated with abrupt changes in injection currents, 3) optically aliased noise appears due to a long coherence length, and 4) the narrow wavelength coverage of a single chip limits resolution. We have developed a method of dynamical frequency tuning, a method of selective data sampling to eliminate current switching noise, an interferometer to reduce aliased noise, and an excess-noise-free connection of two serially scanned lasers to enhance resolution to solve these problems. An optical frequency comb SS-OCT system was achieved with a sensitivity of 124 dB and a dynamic range of 55-72 dB that depended on the depth at an A-scan rate of 3.1 kHz with a resolution of 15 μm by discretely scanning two SSG-DBR lasers, i.e., L-band (1.560-1.599 μm) and UL-band (1.598-1.640 μm). A few OCT images with excellent image penetration depth were obtained. PMID:24409394

  4. Indirect measurement of the magnetocaloric effect using a novel differential scanning calorimeter with magnetic field.

    Science.gov (United States)

    Jeppesen, S; Linderoth, S; Pryds, N; Kuhn, L Theil; Jensen, J Buch

    2008-08-01

    A simple and high-sensitivity differential scanning calorimeter (DSC) unit operating under magnetic field has been built for indirect determination of the magnetocaloric effect. The principle of the measuring unit in the calorimeter is based on Peltier elements as heat flow sensors. The high sensitivity of the apparatus combined with a suitable calibration procedure allows very fast and accurate heat capacity measurements under magnetic field to be made. The device was validated from heat capacity measurements for the typical DSC reference material gallium (Ga) and a La(0.67)Ca(0.33)MnO(3) manganite system and the results were highly consistent with previous reported data for these materials. The DSC has a working range from 200 to 340 K and has been tested in magnetic fields reaching 1.8 T. The signal-to-noise ratio is in the range of 10(2)-10(3) for the described experiments. Finally the results have been compared to results from a Quantum Design(R) physical properties measuring system. The configuration of the system also has the advantage of being able to operate with other types of magnets, e.g., permanent magnets or superconducting coils, as well as the ability to be expanded to a wider temperature range.

  5. Theory and operation of a near-field scanning microwave microscope

    Science.gov (United States)

    Vlahacos, C. P.; Steinhauer, David E.; Dutta, S.; Anlage, S. M.; Wellstood, F. C.; Newman, H.

    1997-03-01

    We will describe the operation and capabilities of a near-field microwave microscope with a spatial resolution of 10-100 μm in the frequency range 7.5-12.4 GHz.(C. P. Vlahacos, et al.), Appl. Phys. Lett. 69, 3272 (1996).^,(S. M. Anlage, et al.), IEEE Trans. Appl. Supercond. (1997) The microscope consists of a resonant section of a coaxial cable which is terminated with a small-diameter open-ended coaxial probe. Images are made by scanning the sample under the probe while recording the signal collected in the near-field as a function of sample position. Images can be made of fields produced by a powered circuit or of sample properties such as topography, dielectric constant and loss. To illustrate the operation of the system, images will be presented of microwave devices, such as a planar ferrite microwave circulator and a high-temperature superconducting microstrip YBa_2Cu_3O_7-δ resonator.

  6. Magnetic Permeability Imaging of Metals with a Scanning Near-Field Microwave Microscope

    Science.gov (United States)

    Lee, Sheng-Chiang; Vlahacos, C. P.; Feenstra, B. J.; Schwartz, Andrew; Steinhauer, David; Wellstood, Fredrick; Anlage, Steven

    2001-03-01

    We extended the use of our scanning near-field microwave microscope to measure the local magnetic properties of metallic samples in a spatially-resolved manner. We use a small loop probe to detect magnetic perturbations in thin film and bulk samples. We demonstrate qualitative and quantitative understanding of permeability imaging through spatially-resolved ferromagnetic resonance experiments on a single crystal of the colossal magneto-resistive material La_0.8Sr_0.2MnO_3. The experimental results are well described by a simple model of the system. We also modified this microscope to image the ferromagnetic resonance field over a ferromagnetic sample in the presence of external magnetic field. The spatial resolution is on the order of the size of the loop, currently 200 μ m. Results demonstrating FMR imaging on La_0.8Sr_0.2MnO3 and amorphous magnetic tapes will be presented. Reference: S.C. Lee, C P. Vlahacos, B. J. Feenstra, Andrew Schwartz, D. E. Steinhauer, F. C. Wellstood, and Steve M. Anlage, Appl. Phys. Lett., December 18 (2000)

  7. Spot Scan Probe of Lateral Field Effects in a Thick Fully-Depleted CCD

    CERN Document Server

    O'Connor, Paul

    2014-01-01

    Flat-field images with thick, fully-depleted CCDs exhibit response variations near the edges of the chip and at other locations, such as the regoins bordering mid-frame blooming stop implants. Two possible origins for these repsonse variations have been suggested: either photometric response (quantum efficiency) or effective pixel area is modified in these regions. In the latter case source position and shape distortions would be expected in these regions, with consequent impact on astrometric and weak lensing measurements. As an experimental check to distinguish between the two effects and to gauge the magnitude of distortion, we performed a measurment scanning an artificial star image across the affected region of one device.

  8. RESEARCH ON A SCANNING NEAR-FIELD MICROSCOPY BASED ON A QUARTZ RESONATOR

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A scanning near-field acoustic microscopy(SNAM) us ed in imaging the topography of precise surfaces is presented. As a micro-force sensor, a non-encapsulated 1 MHz quartz resonator is damped by hydrodynamic fo rces when approaching an object. Thus the oscillating characteristics of the leg of the quartz resonator change. While measuring the decrease of the amplitude o f vibrating, the shape of the object can be obtained. Based on the analyses of t he principle and key parameters of SNAM, a SNAM is exploited. A lateral resoluti on of 0.5 μm and vertical resolution of 2 nm has been achieved in the experimen ts.

  9. High contrast en bloc staining of neuronal tissue for field emission scanning electron microscopy

    Science.gov (United States)

    Tapia, Juan C.; Kasthuri, Narayanan; Hayworth, Kenneth; Schalek, Richard; Lichtman, Jeff W.; Smith, Stephen J; Buchanan, JoAnn

    2013-01-01

    Conventional heavy metal post staining methods on thin sections lend contrast but often cause contamination. To avoid this problem, we tested several en bloc staining techniques to contrast tissue in serial sections mounted on solid substrates for examination by Field Emission Scanning Electron Microscope (FESEM). Because FESEM section imaging requires that specimens have higher contrast and greater electrical conductivity than transmission electron microscope (TEM) samples, our technique utilizes osmium impregnation (OTO) to make the samples conductive while heavily staining membranes for segmentation studies. Combining this step with other classic heavy metal en bloc stains including uranyl acetate, lead aspartate, copper sulfate and lead citrate produced clean, highly contrasted TEM and SEM samples of insect, fish, and mammalian nervous system. This protocol takes 7–15 days to prepare resin embedded tissue, cut sections and produce serial section images. PMID:22240582

  10. Prospects for lithium imaging using annular bright field scanning transmission electron microscopy: A theoretical study

    Energy Technology Data Exchange (ETDEWEB)

    Findlay, S.D., E-mail: scott@sigma.t.u-tokyo.ac.jp [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); Lugg, N.R. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Shibata, N. [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); PRESTO, Japan Science and Technology Agency, Saitama 332-0012 (Japan); Allen, L.J. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Ikuhara, Y. [Institute of Engineering Innovation, The University of Tokyo, Tokyo 116-0013 (Japan); Nanostructures Research Laboratory, Japan Fine Ceramic Center, Nagoya 456-8587 (Japan); WPI Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

    2011-07-15

    There is strong interest in lithium imaging, particularly because of its significance in battery materials. However, light atoms only scatter electrons weakly and atomic resolution direct imaging of lithium has proven difficult. This paper explores theoretically the conditions under which lithium columns can be expected to be directly visible using annular bright field scanning transmission electron microscopy. A detailed discussion is given of the controllable parameters and the conditions most favourable for lithium imaging. -- Highlights: {yields} Optimum conditions to image Li columns in Li-bearing materials with ABF are explored. {yields} Higher accelerating voltages give better contrast at a given resolution. {yields} Aperture size must compromise between resolution and good coupling to the column. {yields} Samples with small along-column interatomic spacing between Li atoms are best. {yields} The trends observed are consistent with prediction based on the s-state model.

  11. Measurement of retinal nerve fiber layer thickness in eyes with optic disc swelling by using scanning laser polarimetry and optical coherence tomography

    Directory of Open Access Journals (Sweden)

    Hata M

    2013-12-01

    Full Text Available Masayuki Hata, Kazuaki Miyamoto, Akio Oishi, Yugo Kimura, Satoko Nakagawa, Takahiro Horii, Nagahisa Yoshimura Department of Ophthalmology and Visual Sciences, Kyoto University Graduate School of Medicine, Kyoto, Japan Background: The retinal nerve fiber layer thickness (RNFLT in patients with optic disc swelling of different etiologies was compared using scanning laser polarimetry (SLP and spectral-domain optical coherence tomography (OCT. Methods: Forty-seven patients with optic disc swelling participated in the cross-sectional study. Both GDx SLP (enhanced corneal compensation and Spectralis spectral-domain OCT measurements of RNFLT were made in 19 eyes with papilledema (PE, ten eyes with optic neuritis (ON, and 18 eyes with nonarteritic anterior ischemic optic neuropathy (NAION at the neuro-ophthalmology clinic at Kyoto University Hospital. Differences in SLP (SLP-RNFLT and OCT (OCT-RNFLT measurements among different etiologies were investigated. Results: No statistical differences in average OCT-RNFLT among PE, ON, and NAION patients were noted. Average SLP-RNFLT in NAION patients was smaller than in PE (P<0.01 or ON (P=0.02 patients. When RNFLT in each retinal quadrant was compared, no difference among etiologies was noted on OCT, but on SLP, the superior quadrant was thinner in NAION than in PE (P<0.001 or ON (P=0.001 patients. Compared with age-adjusted normative data of SLP-RNFLT, average SLP-RNFLT in PE (P<0.01 and ON (P<0.01 patients was greater. Superior SLP-RNFLT in NAION patients was smaller (P=0.026. The ratio of average SLP-RNFLT to average OCT-RNFLT was smaller in NAION than in PE (P=0.001 patients. Conclusion: In the setting of RNFL thickening, despite increased light retardance in PE and ON eyes, SLP revealed that NAION eyes have less retardance, possibly associated with ischemic axonal loss. Keywords: optic disc swelling, scanning laser polarimetry, optical coherence tomography

  12. Measurement of the permittivity and loss of high-loss materials using a Near-Field Scanning Microwave Microscope.

    Science.gov (United States)

    Gregory, A P; Blackburn, J F; Lees, K; Clarke, R N; Hodgetts, T E; Hanham, S M; Klein, N

    2016-02-01

    In this paper improvements to a Near-Field Scanning Microwave Microscope (NSMM) are presented that allow the loss of high loss dielectric materials to be measured accurately at microwave frequencies. This is demonstrated by measuring polar liquids (loss tangent tanδ≈1) for which traceable data is available. The instrument described uses a wire probe that is electromagnetically coupled to a resonant cavity. An optical beam deflection system is incorporated within the instrument to allow contact mode between samples and the probe tip to be obtained. Liquids are contained in a measurement cell with a window of ultrathin glass. The calibration process for the microscope, which is based on image-charge electrostatic models, has been adapted to use the Laplacian 'complex frequency'. Measurements of the loss tangent of polar liquids that are consistent with reference data were obtained following calibration against single-crystal specimens that have very low loss. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  13. Measurement of the permittivity and loss of high-loss materials using a Near-Field Scanning Microwave Microscope

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, A.P.; Blackburn, J.F.; Lees, K.; Clarke, R.N. [National Physical Laboratory (NPL) (United Kingdom); Hodgetts, T.E. [Consultant to NPL (United Kingdom); Hanham, S.M.; Klein, N. [Imperial College London (United Kingdom)

    2016-02-15

    In this paper improvements to a Near-Field Scanning Microwave Microscope (NSMM) are presented that allow the loss of high loss dielectric materials to be measured accurately at microwave frequencies. This is demonstrated by measuring polar liquids (loss tangent tanδ≈1) for which traceable data is available. The instrument described uses a wire probe that is electromagnetically coupled to a resonant cavity. An optical beam deflection system is incorporated within the instrument to allow contact mode between samples and the probe tip to be obtained. Liquids are contained in a measurement cell with a window of ultrathin glass. The calibration process for the microscope, which is based on image-charge electrostatic models, has been adapted to use the Laplacian ‘complex frequency’. Measurements of the loss tangent of polar liquids that are consistent with reference data were obtained following calibration against single-crystal specimens that have very low loss. - Highlights: • Design of a microwave microscope with resolution on the micron scale. • Improved theory for obtaining permittivity and loss tangent of high loss materials. • Polar reference liquids are used as test samples. • Traceable measurements with accuracy approximately ±10% in ε′ and ±20% in tan δ.

  14. Radio-Optical Galaxy Shape Correlations in the COSMOS Field

    CERN Document Server

    Tunbridge, Ben; Brown, Michael L

    2016-01-01

    We investigate the correlations in galaxy shapes between optical and radio wavelengths using archival observations of the COSMOS field. Cross-correlation studies between different wavebands will become increasingly important for precision cosmology as future large surveys may be dominated by systematic rather than statistical errors. In the case of weak lensing, galaxy shapes must be measured to extraordinary accuracy (shear systematics of $ 0.212\\pi$ radians (or $38.2^{\\circ}$) at a $95\\%$ confidence level.

  15. A comparative study on the optical limiting properties of different nano spinel ferrites with Z-scan technique

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jeevan Job; Krishnan, Shiji [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam, Kerala 686560 (India); Sridharan, K.; Philip, Reji [Light and Matter Physics Group, Raman Research Institute, C.V. Raman Avenue, Sadashivanagar, Bangalore 560080 (India); Kalarikkal, Nandakumar, E-mail: nkkalarikkal@mgu.ac.in [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam, Kerala 686560 (India); Centre for Nanoscience and Nanotechnology, Mahatma Gandhi University, Kottayam, Kerala 686560 (India)

    2012-08-15

    Highlights: ► First report in which the optical limiting properties of five different nano spinel ferrites are compared. ► The obtained nonlinearity fits to a two-photon like absorption process. ► Except for NiFe{sub 2}O{sub 4}, the observed nonlinearity has contributions from excited state absorption. ► A size dependent optical limiting response is obtained. ► Among the investigated ferrites, ZnFe{sub 2}O{sub 4} is found to be a better candidate for the optical limiting applications. -- Abstract: We report the optical limiting properties of five different spinel ferrites, NiFe{sub 2}O{sub 4}, Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}, ZnFe{sub 2}O{sub 4}, Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4}, and CoFe{sub 2}O{sub 4} with an average particle grain size of 8 nm. The optical limiting properties are investigated using the open aperture Z-scan technique. The obtained nonlinearity fits to a two-photon like absorption process. Except for NiFe{sub 2}O{sub 4}, the observed nonlinearity has contributions from excited state absorption. The optical limiting response is also studied against particle size and the nonlinearity is found to increase with increasing particle size within the range of our investigations. On comparing the optical limiting properties, ZnFe{sub 2}O{sub 4} is found to be a better candidate for the optical limiting applications. To the best of our knowledge, this is the first report where the optical limiting properties of spinel ferrites are compared.

  16. Integrated optical electric field sensor with telescopic dipole

    Institute of Scientific and Technical Information of China (English)

    Bao Sun; Fushen Chen; Yongjun Yang

    2008-01-01

    An integrated optical electric field sensor based on a Mach-Zehnder interferometer with the telescopic dipole is designed and fabricated, and its electrodes are segmented and connected with a telescopic dipole.The measured results show that when the frequency response is from 10kHz to 6GHz with the antenna length of 55mm, the minimum detectable electric field of 20mV/m can be obtained, and the linear dynamics range can reach 90dB at 250MHz.

  17. Field-enhanced nonlinear optical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kostiučenko, Oksana; Fiutowski, Jacek; Brewer, Jonathan R.;

    Second harmonic generation in nonlinearly optically active organic nanofibers, generated via self-assembled surface growth from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules, has been investigated. After the growth on mica templates, nanofibers have been transferred onto...... lithographically defined regular arrays of metal and dielectric nanostructures. Such hybrid systems were employed to correlate the second harmonic response to both morphology of the fibers i.e. local field enhancement due to local changes in the fiber’s morphology and field enhancement effects appearing...

  18. Field-enhanced nonlinear optical properties of organic nanofibers

    DEFF Research Database (Denmark)

    Kostiučenko, Oksana; Fiutowski, Jacek; Brewer, Jonathan R.;

    2014-01-01

    Second harmonic generation in nonlinearly optically active organic nanofibers, generated via self-assembled surface growth from nonsymmetrically functionalized para-quarterphenylene (CNHP4) molecules, has been investigated. After the growth on mica templates, nanofibers have been transferred onto...... lithographically defined regular arrays of metal and dielectric nanostructures. Such hybrid systems were employed to correlate the second harmonic response to both morphology of the fibers i.e. local field enhancement due to local changes in the fiber’s morphology and field enhancement effects appearing...

  19. Nonlinear optical investigation of the Tris(2‧,2-bipyridyl)iron(II) tetrafluoroborate using z-scan technique

    Science.gov (United States)

    Zidan, M. D.; Al-Ktaifani, M. M.; Allahham, A.

    2017-05-01

    Z-scan measurements were performed with a CW diode laser at 635 nm to investigate the nonlinear optical properties of Tris(2‧,2-bipyridyl)iron(II) tetrafluoroborate in ethanol at two concentrations. Theoretical fit was carried out to evaluate the nonlinear absorption coefficient (β) and the negative nonlinear refractive index (n2) for the studied complex. Furthermore, the ground-state absorption cross sections (σg), the excited-state absorption cross sections (σex) and thermo-optic coefficient were also estimated. The investigations show large NLO response, which is predominantly associated with substantial conjugation between the aromatic ring π-electron system and d-electron set metal center. The obtained results give a strong indication that Tris(2‧,2-bipyridyl)iron(II) tetrafluoroborate have a potential application in optical domain.

  20. Investigations on nucleation, HRXRD, optical, piezoelectric, polarizability and Z-scan analysis of L-arginine maleate dihydrate single crystals

    Science.gov (United States)

    Sakthy Priya, S.; Alexandar, A.; Surendran, P.; Lakshmanan, A.; Rameshkumar, P.; Sagayaraj, P.

    2017-04-01

    An efficient organic nonlinear optical single crystal of L-arginine maleate dihydrate (LAMD) has been grown by slow evaporation solution technique (SEST) and slow cooling technique (SCT). The crystalline perfection of the crystal was examined using high-resolution X-ray diffractometry (HRXRD) analysis. Photoluminescence study confirmed the optical properties and defects level in the crystal lattice. Electromechanical behaviour was observed using piezoelectric co-efficient (d33) analysis. The photoconductivity analysis confirmed the negative photoconducting nature of the material. The dielectric constant and loss were measured as a function of frequency with varying temperature and vice-versa. The laser damage threshold (LDT) measurement was carried out using Nd:YAG Laser with a wavelength of 1064 nm (Focal length is 35 cm) and the obtained results showed that LDT value of the crystal is high compared to KDP crystal. The high laser damage threshold of the grown crystal makes it a potential candidate for second and higher order nonlinear optical device application. The third order nonlinear optical parameters of LAMD crystal is determined by open-aperture and closed-aperture studies using Z-scan technique. The third order linear and nonlinear optical parameters such as the nonlinear refractive index (n2), two photon absorption coefficient (β), Real part (Reχ3) and imaginary part (Imχ3) of third-order nonlinear optical susceptibility are calculated.