WorldWideScience

Sample records for fel ultrashort electron

  1. Electron Beam Diagnostic Based on a Short Seeded FEL

    CERN Document Server

    Graves, W; Kaertner, Franz X; Zwart, T

    2005-01-01

    The optical properties of an FEL amplifier are sensitively dependent on the electron beam current profile, energy spread, and transverse emittance. In this paper we consider using a short FEL amplifier operating on a low harmonic of a visible-IR input seed as a mildly destructive electron beam diagnostic able to measure these properties for sub-ps time slices. The optical methods are described as well as a planned implementation of the device for the FERMI@Elettra XUV FEL under construction at Sincrotrone Trieste, including its fiber-based seed laser closely coupled with the facility timing system, undulator parameters, and requirements on the electron and FEL pulses. This diagnostic is conveniently integrated with a "laser heater" designed to increase the very low electron beam energy spread produced by a photoinjector in order to avoid space charge and coherent synchrotron radiation instabilities.

  2. Ultra-Short Electron Bunch and X-Ray Temporal Diagnostics with an X-Band Transverse Deflector

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y.; Emma, P.; Frisch, J.; Huang, Z.; Loos, H.; Krejcik, P.; Wang, M-H.; /SLAC; Behrens, C.; /DESY

    2011-12-13

    The measurement of ultra-short electron bunches on the femtosecond time scale constitutes a very challenging problem. In X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS), generation of sub-ten femtosecond X-ray pulses is possible, and some efforts have been put into both ultra-short electron and X-ray beam diagnostics. Here we propose a single-shot method using a transverse rf deflector (X-band) after the undulator to reconstruct both the electron bunch and X-ray temporal profiles. Simulation studies show that about 1 fs (rms) time resolution may be achievable in the LCLS and is applicable to a wide range of FEL wavelengths and pulse lengths. The jitter, resolution and other related issues will be discussed. The successful operation of the Linac Coherent Light Source (LCLS), with its capability of generating free-electron laser (FEL) X-ray pulses from a few femtoseconds (fs) up to a few hundred fs, opens up vast opportunities for studying atoms and molecules on this unprecedented ultrashort time scale. However, tremendous challenges remain in the measurement and control of these ultrashort pulses with femtosecond precision, for both the electron beam (e-beam) and the X-ray pulses. For ultrashort e-beam bunch length measurements, a standard method has been established at LCLS using an S-band radio-frequency (rf) deflector, which works like a streak camera for electrons and is capable of resolving bunch lengths as short as {approx} 10 fs rms. However, the e-beam with low charges of 20 pC at LCLS, which is expected to be less than 10 fs in duration, is too short to be measured using this transverse deflector. The measurement of the electron bunch length is helpful in estimating the FEL X-ray pulse duration. However, for a realistic beam, such as that with a Gaussian shape or even a spiky profile, the FEL amplification varies along the bunch due to peak current or emittance variation. This will cause differences between the temporal

  3. Electron bunch length measurement at the Vanderbilt FEL

    Energy Technology Data Exchange (ETDEWEB)

    Amirmadhi, F.; Brau, C.A.; Mendenhall, M. [Vanderbilt Free-Electron-Laser Center, Nashville, TN (United States)] [and others

    1995-12-31

    During the past few years, a number of experiments have been performed to demonstrate the possibility to extract the longitudinal charge distribution from spectroscopic measurements of the coherent far-infrared radiation emitted as transition radiation or synchrotron radiation. Coherent emission occurs in a spectral region where the wavelength is comparable to or longer than the bunch length, leading to an enhancement of the radiation intensity that is on the order of the number of particles per bunch, as compared to incoherent radiation. This technique is particularly useful in the region of mm and sub-mm bunch lengths, a range where streak-cameras cannot be used for beam diagnostics due to their limited time resolution. Here we report on experiments that go beyond the proof of principle of this technique by applying it to the study and optimization of FEL performance. We investigated the longitudinal bunch length of the Vanderbilt FEL by analyzing the spectrum of coherent transition radiation emitted by the electron bunches. By monitoring the bunch length while applying a bunch-compression technique, the amount of the compression could be easily observed. This enabled us to perform a systematic study of the FEL performance, especially gain and optical pulse width, as a function of the longitudinal electron distribution in the bunch. The results of this study will be presented and discussed.

  4. Single-shot measurement of free-electron laser polarization at SDUV-FEL

    CERN Document Server

    Feng, Lie; Zhang, Tong; Feng, Chao; Chen, Jianhui; Wang, Xingtao; Lan, Taihe; Shen, Lei; Zhang, Wenyan; Yao, Haifeng; Liu, Xiaoqing; Liu, Bo; Wang, Dong

    2014-01-01

    In this paper, a division-of-amplitude photopolarimeter (DOAP) for measuring the polarization state of free-electron laser (FEL) pulse is described. The incident FEL beam is divided into four separate beams, and four Stokes parameters can be measured in a single-shot. In the crossed-planar undulators experiment at Shanghai deep ultraviolet FEL test facility, this DOAP instrument constructed in house responses accurately and timely while the polarization-state of fully coherent FEL pulses are switched, which is helpful for confirming the crossed-planar undulators technique for short-wavelength FELs.

  5. Coherent undulator radiation of electron beam, microbunched for the FEL power outcoupling

    Energy Technology Data Exchange (ETDEWEB)

    Kulipanov, G.N.; Sokolov, A.S.; Vinokurov, N.A. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)

    1995-12-31

    The spectral intensity of the coherent undulator radiation of electron beam, preliminarily microbunched by the FEL oscillator for the FEL power outcoupling, is approximately calculated by simple analytic considerations, taking into account the transverse emittances and the energy spread of the microbunched electron beams.

  6. Production of ultrashort FEL XUV pulses via a reverse undulator taper

    Science.gov (United States)

    Fawley, W. M.

    2008-08-01

    We adapt the "reverse taper" scheme presented by Saldin et al. (Phys. Rev. ST Accel. Beams 9 (2006) 050702) for attosecond pulse production to the XUV/soft-X-ray regime. We find that GW-level pulses of a few femtosecond duration or shorter can be produced using electron beams of quite moderate parameters and undulators of 20-m length or shorter. The output pulse is significantly shifted in wavelength relative to the main background which permits a further increase in contrast ratio via simple monochromatization. Moreover, the output pulse has a natural wavelength chirp that allows further temporal compression, if wanted. Both positive and negative chirps can be produced depending upon the sign of the undulator taper.

  7. Radiation sources and diagnostics with ultrashort electron bunches

    Energy Technology Data Exchange (ETDEWEB)

    Catravas, P.; Esarey, E.; Leemans, W.P.

    2001-11-02

    The basic principles and design of radiation sources (transition radiation, Cerenkov radiation, radiation from periodic structures, etc.) and radiation-based diagnostics will be discussed, with emphasis on radiation from ultra-short electron bunches. Ultra-short electron bunches have the potential to produce high peak flux radiation sources that cover wavelength regimes where sources are currently not widely available (coherent THz/IR) as well as ultrashort X-ray pulses (3-100 fs). While radiation from the electron bunch contains the full signature of the electron beam and/or medium it has travelled through, the deconvolution of a single property of interest can be difficult due to a large number of contributing properties. The experimental implementation of novel solutions to this problem will be described for beams from 30 MeV to 30 GeV, including fluctuational interferometry, source imaging, phase matched cone angles and laser-based techniques, which utilize optical transition radiation, wiggler and Cerenkov radiation, and Thomson scattering. These novel diagnostic methods have the potential to resolve fs bunch durations, slice emittance on fs scales, etc. The advantages and novel features of these techniques will be discussed.

  8. Electron Beam Characterization at PITZ and the VUV-FEL at DESY

    CERN Document Server

    Honkavaara, K

    2005-01-01

    The VUV-FEL being commissioned at DESY Hamburg is a user facility for SASE FEL radiation in the VUV wavelength range. The quality of the high brightness electron beam driving the VUV-FEL plays an important role for the performance of the facility. Prior to installation, the electron photo-injector of the VUV-FEL has been fully tested and characterized at the PITZ photo injector test facility at DESY Zeuthen, dedicated to develop high brightness electron sources for FEL projects like the VUV-FEL and the XFEL. We summarize the results on transverse emittance optimization at PITZ and report on the upgrade of the PITZ facility presently under construction. Results on transverse emittance optimization and measurements at the VUV-FEL are presented. Projected emittances around 1.4 mm mrad for 90% of a 1 nC bunch have been regularly measured. In addition, recent measurements of the longitudinal bunch profile after compression using a transverse deflecting cavity are presented.

  9. Optical circular deflector with attosecond resolution for ultrashort electron beam

    Directory of Open Access Journals (Sweden)

    Zhen Zhang

    2017-05-01

    Full Text Available A novel method using high-power laser as a circular deflector is proposed for the measurement of femtosecond (fs and sub-fs electron beam. In the scheme, the electron beam interacts with a laser pulse operating in a radially polarized doughnut mode (TEM_{01^{*}} in a helical undulator, generating angular kicks along the beam in two directions at the same time. The phase difference between the two angular kicks makes the beam form a ring after a propagation section with appropriate phase advance, which can reveal the current profile of the electron beam. Detailed theoretical analysis of the method and numerical results with reasonable parameters are both presented. It is shown that the temporal resolution can reach up to ∼100 attosecond, which is a significant improvement for the diagnostics of ultrashort electron beam.

  10. The envelope Hamiltonian for electron interaction with ultrashort pulses

    CERN Document Server

    Toyota, Koudai; Rost, Jan M

    2014-01-01

    For ultrashort VUV pulses with a pulse length comparable to the orbital time of the bound electrons they couple to we propose a simplified envelope Hamiltonian. It is based on the Kramers-Henneberger representation in connection with a Floquet expansion of the strong-field dynamics but keeps the time dependence of the pulse envelope explicit. Thereby, the envelope Hamiltonian captures the essence of the physics, -- light-induced shifts of bound states, single-photon absorption, and non-adiabatic electronic transitions. It delivers quantitatively accurate ionization dynamics and allows for physical insight into the processes occurring. Its minimal requirements for construction in terms of laser parameters make it ideally suited for a large class of atomic and molecular problems.

  11. Generation of ultra-short relativistic-electron-bunch by a laser wakefield

    NARCIS (Netherlands)

    Khachatryan, A.G.; Boller, K.-J.; Goor, van F.A.

    2003-01-01

    The possibility of the generation of an ultra-short (about one micron long) relativistic (up to a few GeVs) electron-bunch in a moderately nonlinear laser wakefield excited in an underdense plasma by an intense laser pulse is investigated. The ultra-short bunch is formed by trapping, effective compr

  12. An Electron Bunch Compressor Based on an FEL Interaction in the Far Infra Red

    OpenAIRE

    Gaupp, Andreas

    2013-01-01

    In this note an electron bunch compressor is proposed based on FEL type interaction of the electron bunch with far infrared (FIR) radiation. This mechanism maintains phase space density and thus requires a high quality electron beam to produce bunches of the length of a few ten micrometer.

  13. High Average Current Electron Guns for High-Power FELs

    Science.gov (United States)

    2009-12-09

    FELs 10 Appendix B: Thermionic Injectors 11 Appendix C: Grid Fields and Bunch Emittance 13 Appendix D: PARMELA Simulation of an IOT Gun 16...Inductive Output Tube ( IOT ) amplifiers [32-34] and can generate average currents of ~1 A, peak currents of ~ 5-10 A, cathode-anode voltages of ~ 35...of grid wires, centered at z = zG and x = ±a, ±3a, ±5a, ..., is given by <D(JC,Z) = - X n = ±l.±3. Fa(x,z) Gn(x,z) ( C3 ) where *0 = (1 / 2

  14. Amplification of current density modulation in a FEL with an infinite electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G.; Litvinenko, V.N.; Webb, S.D.

    2011-03-28

    We show that the paraxial field equation for a free electron laser (FEL) in an infinitely wide electron beam with {kappa}-2 energy distribution can be reduced to a fourth ordinary differential equation (ODE). Its solution for arbitrary initial phase space density modulation has been derived in the wave-vector domain. For initial current modulation with Gaussian profile, close form solutions are obtained in space-time domain. In developing an analytical model for a FEL-based coherent electron cooling system, an infinite electron beam has been assumed for the modulation and correction processes. While the assumption has its limitation, it allows for an analytical close form solution to be obtained, which is essential for investigating the underlying scaling law, benchmarking the simulation codes and understanding the fundamental physics. 1D theory was previously applied to model a CeC FEL amplifier. However, the theory ignores diffraction effects and does not provide the transverse profile of the amplified electron density modulation. On the other hand, 3D theories developed for a finite electron beam usually have solutions expanded over infinite number of modes determined by the specific transverse boundary conditions. Unless the mode with the largest growth rate substantially dominates other modes, both evaluation and extracting scaling laws can be complicated. Furthermore, it is also preferable to have an analytical FEL model with assumptions consistent with the other two sections of a CeC system. Recently, we developed the FEL theory in an infinitely wide electron beam with {kappa}-1 (Lorentzian) energy distribution. Close form solutions have been obtained for the amplified current modulation initiated by an external electric field with various spatial-profiles. In this work, we extend the theory into {kappa}-2 energy distribution and study the evolution of current density induced by an initial density modulation.

  15. Powerful electrostatic FEL: Regime of operation, recovery of the spent electron beam and high voltage generator

    Energy Technology Data Exchange (ETDEWEB)

    Boscolo, I. [Univ. and INFN, Milan (Italy); Gong, J. [Southwest Jiaotong Univ., Chengdu (China)

    1995-02-01

    FEL, driven by a Cockcroft-Walton electrostatic accelerator with the recovery of the spent electron beam, is proposed as powerful radiation source for plasma heating. The low gain and high gain regimes are compared in view of the recovery problem and the high gain regime is shown to be much more favourable. A new design of the onion Cockcroft-Walton is presented.

  16. Ultrashort electromagnetic clusters formation by two-stream superheterodyne free electron lasers

    DEFF Research Database (Denmark)

    Kulish, Viktor V.; Lysenko, Alexander V.; Volk, Iurii I.

    2016-01-01

    A cubic nonlinear self-consistent theory of multiharmonic two-stream superheterodyne free electron lasers (TSFEL) of a klystron type, intended to form powerful ultrashort clusters of an electromagnetic field is constructed. Plural three-wave parametric resonant interactions of wave harmonics have...... been taken into account. An amplitude, phase and spectral analyses of the processes occurring in such devices have been carried out. The conditions necessary for the forming of the ultrashort clusters of an electromagnetic field have been found out. The possibility of the ultrashort electromagnetic...

  17. Laser-plasma interactions from thin tapes for high-energy electron accelerators and seeding compact FELs

    Science.gov (United States)

    Shaw, Brian Henry

    This thesis comprises a detailed investigation of the physics of using a plasma mirror (PM) from a tape by reflecting ultrashort pulses from a laser-triggered surface plasma. The tapes used in the characterization of the PM are VHS and computer data storage tape. The tapes are 6.6 m (computer storage tape) and 15 m (VHS) thick. Each tape is 0.5 inches wide, and 10s of meters of tape are spooled using a tape drive; providing thousands of shots on a single reel of tape. The amount of reflected energy of the PM was studied for different input intensities. The fluence was varied by translating the focus of the laser upstream and downstream of the tape, which changed the spot size on the tape surface and hence changed the fluence. This study measured reflectances from both sides of the two tapes, and for input light of both s and p-polarizations. Lastly, an analytic model was developed to understand the reflectance as a function of fluence for each tape material and polarization. Another application that benefits from the advancements of LPA technology is an LPAbased FEL. By sending a high quality electron bunch through an undulator (a periodic structure of positive and negative magnetic poles), the electrons oscillate transversely to the propagation axis and produce radiation. The 1.5 m THUNDER undulator at the BELLA Center has been commissioned using electron beams of 400MeV beams with broad energy spread (35%). To produce a coherent LPA-based FEL, the beam quality would need to improve to sub-percent level energy spread. A seed source could be used to help induce bunching of the electron beam within the undulator. This thesis described the experimental investigation of the physics of using solid-based surface high-harmonic generation (SHHG) from a thin tape as a possible seed source for an FEL. A thin tape placed within centimeters of the undulator's entrance could act as a harmonic generating source, while simultaneously transmitting an electron beam. This removes

  18. Experimental Studies of Temporal Electron Beam Shaping at the DUV-FEL Accelerator

    CERN Document Server

    Loos, H; Doweel, D; Ferario, M; Petrarca, M; Serafini, L; Sheehy, B; Shen, Y; Tsang, Thomas; Vicario, C; Wang, X

    2005-01-01

    The photoinjectors for future short wavelength high brightness accelerator driven light sources need to produce an electron beam with ultra-low emittance. At the DUV-FEL facility at BNL, we studied the effect of longitudinally shaping the photocathode laser pulses on the electron beam dynamics. We report on measurements of transverse and longitudinal electron beam emittance and comparisons of the experimental results with simulations.

  19. Study on wavelength shortening and upgrading of the free electron laser (FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Tetsuo; Yamada, Kawakatsu; Sei, Norihiro; Ohgaki, Hideaki; Sugiyama, Suguru; Mikado, Tomohisa [Electrotechnical Lab., Tsukuba, Ibaraki (Japan)

    1997-02-01

    This study is a task of ``Comprehensive study`` in ``nuclear energy basic technology research``, which is promoted under cooperation of four research institutes. The Electrotechnical Laboratory conducted, in 1991 in the first period of colaboration, on successful oscillation at visible region (598 nm) as the first case in Japan, construction of small type accumulation ring NIJI-IV for FEL, successful oscillation of visible range from 595 to 488 nm by installing optical krystron with maximum frequency in the world, and successful emittance lowering of accumulation beam by wide improvement of the ring. In the optical resonator, studies on minute loss measuring technique and on recovery from mirror deterioration were promoted. In the second period started from fiscal year of 1994, studies on FEL oscillation technique in short wavelength and upgrading of FEL corresponding to a frontier area were started, to succeed an oscillation experiment at 350 nm in ultraviolet area on April, 1994. Then, studies on generation of high luminescence x-ray owing to laser Compton scattering using FEL as a future plan, on design of a new accumulation ring and on the others as well as studies on further quality improvement of electron beam and on optical resonator have been promoted. (G.K.)

  20. Critical issues for high-power FEL based on microtron recuperator/electron out-coupling scheme

    Science.gov (United States)

    Vinokurov, Nikolai A.; Zholents, Alexander A.; Fawley, William M.; Kim, Kwang J.

    1997-05-01

    The FELs based on the rf accelerator-recuperator and the electron outcoupling is promising for obtaining average output power of hundreds of kilowatts. We present basic considerations for the system stability and performance optimization for this scheme.

  1. Simulation of planar FEL-amplifier with tape relativistic electron beam

    CERN Document Server

    Ginzburg, N S; Peskov, N Yu; Arzhannikov, A V; Sinitskij, S L

    2001-01-01

    The simulation of the planar microwave (4 mm) amplifier on the basis of the powerful laser on free electrons (FEL- amplifier) is carried out. The tape relativistic electron beam with the energy up to 1 MeV and operating current up to 2 kA is formed by the Y-3 accelerators. The complete nonaveraging system of the self-consistent equations describing the process of interaction of the particles, moving in the plane ondulator field is obtained. Thereafter the averaging of the above-mentioned equations was carried out and the linear and nonlinear stages of the amplification process were studied. The additional simulation of the FEL-amplifier is carried out on the basis of the two-dimensional version of the KARAT PIC-code. It is shown that the applied approaches give sufficiently close results

  2. Condensed matter research using the UCSB FEL. [Univ. of California, Santa Barbara Free Electron Laser project

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The University of California, Santa Barbara (UCSB) Free Electron Laser (FEL) project was initiated in 1981 to test the idea of using an electrostatic accelerator in a recirculating beam mode to produce high-power, continuously tunable, coherent far infrared radiation. The development and application of this device to condensed matter research are briefly recounted. Emphasis was on semiconductor research and two-photon experiments. (RWR)

  3. Harmonic Generation at Lower Electron Energies for a Hard X-ray FEL

    Energy Technology Data Exchange (ETDEWEB)

    Marksteiner, Quinn R. [Los Alamos National Laboratory

    2011-01-01

    There are several schemes currently being investigated to pre-bunch the electron beam and step the coherent bunching up to higher harmonics, all which require modulator sections which introduce additional energy modulation. X-ray FELs operate in a regime where the FEL parameter, {rho} is equal to or less than the effective energy spread introduced from the emittance in the electron beam. Because of this large effective energy spread, the energy modulation introduced from harmonic generation schemes would seriously degrade FEL performance. This problem can be mitigated by incorporating the harmonic generation scheme at a lower electron kinetic energy than the energy at the final undulator. This will help because the effective energy spread from emittance is reduced at lower energies, and can be further reduced by making the beam transversely large. Then the beam can be squeezed down slowly enough in the subsequent accelerator sections so that geometric debunching is mitigated. The beam size inside the dispersive chicanes and in the accelerator sections must be carefully optimized to avoid debunching, and each subharmonic modulator section must generate enough energy modulation to overcome the SASE noise without significantly increasing the gain length in the final undulator. Here we show analytical results that demonstrate the feasibility of this harmonic pre-bunching scheme.

  4. High energy electron generation by the 15 mJ ultrashort pulse laser

    Energy Technology Data Exchange (ETDEWEB)

    Takano, K; Hotta, E; Nemoto, K [Department of Energy Sciences Tokyo Institute of Technology 4259 Nagatsuta-cho Midori-ku Yokohama 226-8502 (Japan); Nayuki, T; Oishi, Y; Fujii, T; Zhidkov, A [Central Research Institute of Electric Power Industry 2-6-1 Nagasaka, Yokosuka, Kanagawa, 240-0196 (Japan); Todoriki, M; Hasegawa, S [University of Tokyo 7-3-1 Hongo Bunkyo-ku Tokyo 113-8654 (Japan)], E-mail: k-tn@plasma.es.titech.ac.jp

    2008-05-01

    We propose a small size high energy X-ray source utilizing ultrashort pulse lasers, and a new scheme for generating quasi-monoenergetic electrons. In this paper, we developed a compact laser electron generator and performed experiment that generated energetic electrons over 1 MeV electrons with only 15 mJ laser energy. The temperatures of emitted electrons were measured to be 0.2 MeV and 0.25 MeV without and with prepulse, respectively.

  5. Recent Results from and Future Plans for the VISA II SASE FEL

    CERN Document Server

    Andonian, Gerard; Babzien, Marcus; Ben-Zvi, Ilan; Boscolo, Ilario; Cialdi, Simone; Ferrario, Massimo; Flacco, Alessandro Federico; Frigola, Pedro; Huang, Jung Y; Litvinenko, Vladimir N; Murokh, Alex; Palumbo, Luigi; Pellegrini, Claudio; Reiche, Sven; Rosenzweig, James E; Travish, Gil; Vicario, Carlo; Yakimenko, Vitaly

    2005-01-01

    As the promise of X-ray Free Electron Lasers (FEL) comes close to realization, the creation and diagnosis of ultra-short pulses is of great relevance in the SASE FEL (Self-Amplified Spontaneous Emission) community. The VISA II (Visible to Infrared SASE Amplifier) experiment entails the use of a chirped electron beam to drive a high gain SASE FEL at the Accelerator Test Facility (ATF) in Brookhaven National Labs (BNL). The resulting ultra-short pulses will be diagnosed using an advanced FROG (Frequency Resolved Optical Gating) technique, as well as a double differential spectrum (angle/wavelength) diagnostic. Implementation of sextupole corrections to the longitudinal aberrations affecting the high energy-spread chirped beam during transport to the VISA undulator is studied. Start-to-end simulations, including radiation diagnostics, are discussed. Initial experimental results involving a highly chirped beam transported without sextupole correction, the resulting high gain lasing, and computational analysis are...

  6. A study of ultrafast electron diffusion kinetics in ultrashort-pulse laser ablation of metals

    Institute of Scientific and Technical Information of China (English)

    Yang Jian-Jun; Liu Wei-Wei; Zhu Xiao-Nong

    2007-01-01

    Temperature dependence of the electron diffusion in metallic targets, where the electron-electron collision is the dominant process, is investigated with the help of an extended two-temperature model. In sharp contrast to the low electron temperature case, where only the electron-phonon collisions are commonly considered, the electron diffusion process underlying the high electron temperatures evolves dramatically different in both temporal and spatial domains.Calculated results of the ablation yield at different pulse durations are presented for a copper plate impinged by ultrashort laser pulses with energy fluences ranging from 0.1 J/cm2 to 10 J/cm2. The excellent agreement between the simulation results and the experimental data indicates the significant role of electron-electron collisions in material ablations using intense ultrashort laser pulses.

  7. Electron orbits in the microwave inverse FEL accelerator (MIFELA)

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.B.; Marshall, T.C. [Columbia Univ., New York, NY (United States)

    1995-12-31

    The MIFELA is a new device based on stimulated absorption of microwaves by electrons moving along an undulator. An intense microwave field is used (a{sub s} = eE{sub s}/k{sub s} m c{sup 2} = 0.2) as well as a large undulator field (a{sub w}/{gamma} = eB{sub {perpendicular}}/{gamma}k{sub w} mc{sup 2} = 1/2) to accelerate electrons emitted at 6MeV from a rf gun to 20MeV in 1.5m. The spiral radius of the electrons in the undulator is 8mm, in a waveguide of diameter 34mm, with undulator period about 10cm. There is a small guiding field, and the electrons move in type I orbits. We describe three problems connected with the orbital motion of the electrons in this structure: (i) injecting the electrons in an increasing undulator field prior to entering the MIFELA; (ii) orbital motion and stability inside the MIFELA; (iii) extraction of electrons from the spiral orbit in the accelerator into an axially-propagating beam, obtaining {Beta}{sub {perpendicular}} < 0.02. These studies have application to a MIFELA which is under construction at Yale University by Omega-P.

  8. Plasma switch as a temporal overlap tool for pump-probe experiments at FEL facilities

    Science.gov (United States)

    Harmand, M.; Murphy, C. D.; Brown, C. R. D.; Cammarata, M.; Döppner, T.; Düsterer, S.; Fritz, D.; Förster, E.; Galtier, E.; Gaudin, J.; Glenzer, S. H.; Göde, S.; Gregori, G.; Hilbert, V.; Hochhaus, D.; Laarmann, T.; Lee, H. J.; Lemke, H.; Meiwes-Broer, K.-H.; Moinard, A.; Neumayer, P.; Przystawik, A.; Redlin, H.; Schulz, M.; Skruszewicz, S.; Tavella, F.; Tschentscher, T.; White, T.; Zastrau, U.; Toleikis, S.

    2012-08-01

    We have developed an easy-to-use and reliable timing tool to determine the arrival time of an optical laser and a free electron laser (FEL) pulses within the jitter limitation. This timing tool can be used from XUV to X-rays and exploits high FELs intensities. It uses a shadowgraph technique where we optically (at 800 nm) image a plasma created by an intense XUV or X-ray FEL pulse on a transparent sample (glass slide) directly placed at the pump - probe sample position. It is based on the physical principle that the optical properties of the material are drastically changed when its free electron density reaches the critical density. At this point the excited glass sample becomes opaque to the optical laser pulse. The ultra-short and intense XUV or X-ray FEL pulse ensures that a critical electron density can be reached via photoionization and subsequent collisional ionization within the XUV or X-ray FEL pulse duration or even faster. This technique allows to determine the relative arrival time between the optical laser and the FEL pulses in only few single shots with an accuracy mainly limited by the optical laser pulse duration and the jitter between the FEL and the optical laser. Considering the major interest in pump-probe experiments at FEL facilities in general, such a femtosecond resolution timing tool is of utmost importance.

  9. Electron-based EUV and ultrashort hard-x-ray sources

    Science.gov (United States)

    Egbert, A.; Mader, B.; Tkachenko, B.; Chichkov, B. N.

    2002-11-01

    A brief review of our progress in the realization of femtosecond laser-driven ultrashort hard-x-ray sources is given. New results on the development of electron-based compact EUV sources for "at-wavelength" metrology and next generation lithography are presented. AIP Conference Proceedings.

  10. Method for the determination of the three-dimensional structure of ultrashort relativistic electron bunches

    CERN Document Server

    Geloni, Gianluca; Saldin, Evgeni; Schneidmiller, Evgeni; Yurkov, Mikhail

    2009-01-01

    We describe a novel technique to characterize ultrashort electron bunches in X-ray Free-Electron Lasers. Namely, we propose to use coherent Optical Transition Radiation to measure three-dimensional (3D) electron density distributions. Our method relies on the combination of two known diagnostics setups, an Optical Replica Synthesizer (ORS) and an Optical Transition Radiation (OTR) imager. Electron bunches are modulated at optical wavelengths in the ORS setup. When these electron bunches pass through a metal foil target, coherent radiation pulses of tens MW power are generated. It is thereafter possible to exploit advantages of coherent imaging techniques, such as direct imaging, diffractive imaging, Fourier holography and their combinations. The proposed method opens up the possibility of real-time, wavelength-limited, single-shot 3D imaging of an ultrashort electron bunch.

  11. Ultrashort x-ray pulse generation by electron beam slicing in storage rings

    Directory of Open Access Journals (Sweden)

    A. He

    2014-04-01

    Full Text Available We propose a new method to generate ultrashort x-ray pulses using focused short low energy (∼20  MeV electron bunches to create short slices of electrons from the circulating electron bunches in a synchrotron radiation storage ring. When a low energy electron bunch crosses from the top of a high energy storage ring electron bunch, its Coulomb force will kick a short slice from the core of the storage ring electron bunch. The separated slices, when passing through an undulator, will radiate ultrashort x-ray pulses at about 160 fs. We discuss the advantages, challenges, and provide data which confirm the feasibility of this new method.

  12. Method for the determination of the three-dimensional structure of ultrashort relativistic electron bunches

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca; Ilinski, Petr; Saldin, Evgeni; Schneidmiller, Evgeni; Yurkov, Mikhail

    2009-05-15

    We describe a novel technique to characterize ultrashort electron bunches in Xray Free-Electron Lasers. Namely, we propose to use coherent Optical Transition Radiation to measure three-dimensional (3D) electron density distributions. Our method relies on the combination of two known diagnostics setups, an Optical Replica Synthesizer (ORS) and an Optical Transition Radiation (OTR) imager. Electron bunches are modulated at optical wavelengths in the ORS setup.When these electron bunches pass through a metal foil target, coherent radiation pulses of tens MW power are generated. It is thereafter possible to exploit advantages of coherent imaging techniques, such as direct imaging, diffractive imaging, Fourier holography and their combinations. The proposed method opens up the possibility of real-time, wavelength-limited, single-shot 3D imaging of an ultrashort electron bunch. (orig.)

  13. FEL indulators with the hollow-ring electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Epp, V.; Bordovitsyn, V. [Tomsk State Univ. (Russian Federation); Kozhevnikov, A. [Tomsk Pedagogical Institute (Russian Federation)] [and others

    1995-12-31

    A conceptual design of undulators with a modulated longitudinal magnetic field is proposed. The magnetic field is created by use of a solenoid with axis coincident with the electron beam axis. In order to modulate the magnetic field we propose an insertion of a row of alternating ferromagnetic and superconducting diaphragms in line with electron beam. The simulation of two-dimensional distribution of the magnetic field in the plane containing undulator axis was made using the computer code {open_quotes}Mermaid{close_quotes}. The magnetic field was analysed as a function of the system geometry. The dependence on the spacing l between superconducting diaphragms, inner a and outer b radii of the last ones is investigated. Two versions of the device are considered: with ferromagnetic rings made of magnetically soft material placed between the superconducting diaphragms and without them. It is shown that the field modulation depth increases with ratio of b/l and can exceed 50% in case of the ferromagnetic insertions. An approximate analytical calculation of the magnetic field distribution is performed as follows. The axial-symmetrical magnetic field can be defined by the vector potential with only one nonzero component A(r,{phi}) where r and {phi} are the cylindrical coordinates. The solution of the Laplace`s equation is found under the assumption that the magnetic field is infinitely extended and periodic along the z-axis. The boundary conditions are defined by the undulator design. The result is used for the calculation of the particle dynamics and for the investigations of the trajectory stability. The spectral and angular distribution of the radiation emitted from the described systems is found. The estimations show that the proposed design allows to create relatively high magnitude of the magnetic field (up to 1 T) with a short period about 1 cm or less.

  14. 5 (Upgradable to 25 keV) Free Electron Laser (FEL) Facility

    CERN Document Server

    York, R C

    2013-01-01

    A Free Electron Laser (FEL) facility utilizing a recirculated Superconducting Radio Frequency (SRF) linear accelerator (linac) provides the opportunity to achieve about five times greater photon energy than an unrecirculated linac of similar cost. > A 4 GeV SRF, cw, electron linac can be used to drive an FEL producing 5 keV photons. The SLAC National Accelerator Laboratory, a Department of Energy (DOE) Basic Energy Sciences (BES) laboratory, proposes to utilize a 4 GeV unrecirculated, SRF, linac in a segment of existing linac tunnel. > For an initial investment similar to that of the proposed SLAC strategy, a recirculated SRF linac system could deliver the 4 GeV electrons for photon energies of 5 keV and provide an upgrade path to photon energies of 25 keV. > Further support amounting to about a third of the initial investment would provide upgrade funds for additional SRF linac and cryogenic capacity sufficient to provide electron energies appropriate for 25 keV photons matching the European XFEL.

  15. Electron correlation in two-photon double ionization of helium from attosecond to FEL pulses

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Lee [Los Alamos National Laboratory

    2009-01-01

    We investigate the role of electron correlation in the two-photon double ionization of helium for ultrashort pulses in the extreme ultraviolet (XUV) regime with durations ranging from a hundred attoseconds to a few femtoseconds. We perform time-dependent ab initio calculations for pulses with mean frequencies in the so-called 'sequential' regime ({Dirac_h}{omega} > 54.4 eV). Electron correlation induced by the time correlation between emission events manifests itself in the angular distribution of the ejected electrons, which strongly depends on the energy sharing between them. We show that for ultrashort pulses two-photon double ionization probabilities scale non-uniformly with pulse duration depending on the energy sharing between the electrons. Most interestingly we find evidence for an interference between direct ('nonsequential') and indirect ('sequential') double photoionization with intermediate shake-up states, the strength of which is controlled by the pulse duration. This observation may provide a route towards measuring the pulse duration of x-ray free-electron laser (XFEL) pulses.

  16. Hot electrons generated by ultra-short pulse laser interacting with solid targets

    Institute of Scientific and Technical Information of China (English)

    陈黎明; 张杰; 李玉同; 梁天骄; 王龙; 魏志义; 江文勉

    2000-01-01

    Hot electrons produced by ultra-short pulse laser interacting with solid targets were studied systematically. When 800 nm, 8 × 1015 W/cm2 laser pulses interacted with solid targets, hot electron e-mission was found to be collimated in certain directions and the angular distribution of hot electrons depended on the energy absorption. The angular divergence of outgoing hot electrons was inversely proportional to the hot electron energy. The energy spectrum of hot electrons was found to be in a bi-Maxwellian distribution and the maximum energy was over 500 keV.

  17. Hot electrons generated by ultra-short pulse laser interacting with solid targets

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Hot electrons produced by ultra-short pulse laser interacting with solid targets were studied systematically. When 800 nm, 8×1015 W/cm2 laser pulses interacted with solid targets, hot electron emission was found to be collimated in certain directions and the angular distribution of hot electrons depended on the energy absorption. The angular divergence of outgoing hot electrons was inversely proportional to the hot electron energy. The energy spectrum of hot electrons was found to be in a bi-Maxwellian distribution and the maximum energy was over 500 keV.

  18. An Overview of the MaRIE X-FEL and Electron Radiography LINAC RF Systems

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, Joseph Thomas III [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rees, Daniel Earl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scheinker, Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sheffield, Richard L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-05-04

    The purpose of the Matter-Radiation Interactions in Extremes (MaRIE) facility at Los Alamos National Laboratory is to investigate the performance limits of materials in extreme environments. The MaRIE facility will utilize a 12 GeV linac to drive an X-ray Free-Electron Laser (FEL). Most of the same linac will also be used to perform electron radiography. The main linac is driven by two shorter linacs; one short linac optimized for X-FEL pulses and one for electron radiography. The RF systems have historically been the one of the largest single component costs of a linac. We will describe the details of the different types of RF systems required by each part of the linacs. Starting with the High Power RF system, we will present our methodology for the choice of RF system peak power and pulselength with respect to klystron parameters, modulator parameters, performance requirements and relative costs. We will also present an overview of the Low Level RF systems that are proposed for MaRIE and briefly describe their use with some proposed control schemes.

  19. Ultrafast Coherent Control and Characterization of Surface Reactions using FELs

    Energy Technology Data Exchange (ETDEWEB)

    Ogasawara, Hirohito; Nordlund, Dennis a Nilsson, Anders; /SLAC, SSRL

    2005-09-30

    The microscopic understanding of reactions at surfaces requires an in-depth knowledge of the dynamics of elementary processes on an ultrafast timescale. This can be accomplished using an ultrafast excitation to initiate a chemical reaction and then probe the progression of the reaction with an ultrashort x-ray pulse from the FEL. There is a great potential to use atom-specific spectroscopy involving core levels to probe the chemical nature, structure and bonding of species on surfaces. The ultrashort electron pulse obtained in the linear accelerator to feed the X-ray FEL can also be used for generation of coherent synchrotron radiation in the low energy THz regime to be used as a pump. This radiation has an energy close to the thermal excitations of low-energy vibrational modes of molecules on surfaces and phonons in substrates. The coherent THz radiation will be an electric field pulse with a certain direction that can collectively manipulate atoms or molecules on surfaces. In this respect a chemical reaction can be initiated by collective atomic motion along a specific reaction coordinate. If the coherent THz radiation is generated from the same source as the X-ray FEL radiation, full-time synchronization for pump-probe experiments will be possible. The combination of THz and X-ray spectroscopy could be a unique opportunity for FEL facilities to conduct ultrafast chemistry studies at surfaces.

  20. Analysis and comparison between electric and magnetic power couplers for accelerators in Free Electron Lasers (FEL)

    Science.gov (United States)

    Serpico, C.; Grudiev, A.; Vescovo, R.

    2016-10-01

    Free-electron lasers represent a new and exciting class of coherent optical sources possessing broad wavelength tunability and excellent optical-beam quality. The FERMI seeded free-electron laser (FEL), located at the Elettra laboratory in Trieste, is driven by a 200 m long, S-band linac: the high energy part of the linac is equipped with 6 m long backward traveling wave (BTW) structures. The structures have small iris radius and a nose cone geometry which allows for high gradient operation. Development of new high-gradient, S-band accelerating structures for the replacement of the existing BTWs is under consideration. This paper investigates two possible solutions for the RF power couplers suitable for a linac driven FEL which require reduced wakefields effects, high operating gradient and very high reliability. The first part of the manuscript focuses on the reduction of residual field asymmetries, while in the second analyzes RF performances, the peak surface fields and the expected breakdown rate. In the conclusion, two solutions are compared and pros and cons are highlighted.

  1. Comments on advanced, time-resolved imaging techniques for free-electron laser (FEL) experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.

    1992-01-01

    An extensive set of time-resolved imaging experiments has been performed on rf-linac driven free-electron lasers (FELs) over the past few years. These experiments have addressed both micropulse and macropulse timescales on both the charged-particle beam and the wiggler/undulator outputs (spontaneous emission and lasing). A brief review of first measurements on photoinjecter micropulse elongation, submacropulse phase slew in drive lasers, submacropulse wavelength shifts in lasers, etc. is presented. This is followed by discussions of new measurements of 35-MeV electron beam micropulse bunch length (<10 ps) using optical transition radiation, some of the first single bend synchrotron radiation beam profile measurements at gamma <80, and comments on the low-jitter synchroscan streak camera tuner. These techniques will be further developed on the 200-650 MeV linac test stand at the Advanced Photon Source (APS) in the next few years. Such techniques should be adaptable to many of the present FEL designs and to some aspects of the next generation of light sources.

  2. Comments on advanced, time-resolved imaging techniques for free-electron laser (FEL) experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.

    1992-11-01

    An extensive set of time-resolved imaging experiments has been performed on rf-linac driven free-electron lasers (FELs) over the past few years. These experiments have addressed both micropulse and macropulse timescales on both the charged-particle beam and the wiggler/undulator outputs (spontaneous emission and lasing). A brief review of first measurements on photoinjecter micropulse elongation, submacropulse phase slew in drive lasers, submacropulse wavelength shifts in lasers, etc. is presented. This is followed by discussions of new measurements of 35-MeV electron beam micropulse bunch length (<10 ps) using optical transition radiation, some of the first single bend synchrotron radiation beam profile measurements at gamma <80, and comments on the low-jitter synchroscan streak camera tuner. These techniques will be further developed on the 200-650 MeV linac test stand at the Advanced Photon Source (APS) in the next few years. Such techniques should be adaptable to many of the present FEL designs and to some aspects of the next generation of light sources.

  3. A Novel Diagnostics of Ultrashort Electron Bunches Based on Detection of Coherent Radiation from Bunched Electron Beam in an Undulator

    CERN Document Server

    Saldin, Evgeny L; Yurkov, Mikhail V

    2004-01-01

    We propose a new method for measurements of the longitudinal profile of 100 femtosecond electron bunches for X-ray Free Electron Lasers (XFELs). The method is based on detection of coherent undulator radiation produced by modulated electron beam. Seed optical quantum laser is used to produce exact optical replica of ultrashort electron bunches. The replica is generated in apparatus which consists of an input undulator (energy modulator), and output undulator (radiator) separated by a dispersion section. The radiation in the output undulator is excited by the electron bunch modulated at the optical wavelength and rapidly reaches a hundred-MW-level power. We then use the now-standard method of ultrashort laser pulse-shape measurement, a tandem combination of autocorrelator and spectrum (FROG -- frequency resolved optical gating) providing real-time single-shot measurements of the electron bunch structure. The big advantage of proposed technique is that it can be used to determine the slice energy spread and emi...

  4. Electron Gun and Injector Designs for State-of-the-Art FELs

    CERN Document Server

    Blüm, H P; Christina, V; Cole, M D; Falletta, M; Holmes, D; Peterson, E; Rathke, J; Schultheiss, T; Todd, A M M; Wong, R

    2005-01-01

    Reliable, high-brightness, high-power injector operation is a critical technology issue for energy recovery linac drivers of high-power free electron lasers (FEL). Advanced Energy Systems is involved in three ongoing injector programs that target up to 0.5 Ampere current levels at emittance values consistent with the requirements of the FEL. One is a DC photocathode gun and superconducting RF (SRF) booster cryomodule. A 748.5 MHz injector of this type is being assembled and will be tested up to 100 mA at the Thomas Jefferson National Accelerator Facility (JLAB) beginning in 2007. The second approach being explored is a high-current normal-conducting RF photoinjector. A 700 MHz gun, presently under fabrication, will undergo thermal test in 2006 at Los Alamos National Laboratory (LANL). Finally, a half-cell 703.75 MHz SRF gun is presently being designed and will be tested to 0.5 Ampere at Brookhaven National Laboratory (BNL) in 2007. The status and projected performance for each of these injector projects is pr...

  5. Modeling of a planar FEL amplifier with a sheet relativistic electron beam

    CERN Document Server

    Ginzburg, N S; Peskov, N Yu; Arzhannikov, A V; Sinitsky, S L

    2002-01-01

    The paper is devoted to the modeling of a 75 GHz planar FEL-amplifier. This amplifier is driven by a sheet electron beam (1 MeV, 2 kA) produced by the U-3 accelerator (BINP). Different approaches based on non-averaged self-consistent system of equations as well as the averaged equations were used for the description of interaction between the electron beam and the TEM-mode of the planar waveguide. Both methods demonstrated similar results with maximum gains 24-25 db, corresponding to an output power of about 250-300 MW and an efficiency of 14-17%. The 2-D version of the PIC-code KARAT was used for additional modeling. KARAT-based simulations demonstrated a maximum gain up to 22 db, output power 160-170 MW and an efficiency of 9%. The reduction of gain can be explained by the space-charge effects.

  6. Diagnostics and Instrumentation for FEL

    CERN Document Server

    Couprie, M E

    2001-01-01

    Free Electron Laser are coherent sources of radiation based on the interaction of a relativistic electron beam in an undulator field. According to the energy of the accelerator, they presently cover a wide spectral range, from the infra-red to the VUV. FELs combine the diagnostics of typical laser systems (for the measurement of spectral and temporal characteristics, the transverse mode pattern, the polarisation) and the diagnostics of relativistic electron beams. The electron beam is characterised in order to evaluate and control the FEL performances, but also in order to measure the effect of the FEL on the electron beam. The FEL characteristics are monitored with various types of detectors, depending mainly on the spectral range. Diagnostics for Linac based Infra Red FELs and storage ring FELs in the UV-VUV will be described. Particular instrumentation, required for FEL operation, such as the optical resonator, possible diagnostics inside the undulator will also be analysed.

  7. Influence of spatiotemporal coupling on the capture-and-acceleration-scenario vacuum electron acceleration by ultrashort pulsed laser beam

    Institute of Scientific and Technical Information of China (English)

    Lu Da-Quan; Qian Lie-Jia; Li Yong-Zhong; Fan Dian-Yuan

    2007-01-01

    This paper investigates the properties of the ultrashort pulsed beam aimed to the capture-and-acceleration-scenario(CAS) vacuum electron acceleration. The result shows that the spatiotemporal distribution of the phase velocity, the longitudinal component of the electric field and the acceleration quality factor are qualitatively similar to that of the continuous-wave Gaussian beam, and are slightly influenced by the spatiotemporal coupling of the ultrashort pulsed beam. When the pulse is compressed to an ultrashort one in which the pulse duration TFWHM < 5T0, the variation of the maximum net energy gain due to the carrier-envelope phase is a crucial disadvantage in the CAS acceleration process.

  8. Computations of longitudinal electron dynamics in the recirculating cw RF accelerator-recuperator for the high average power FEL

    Science.gov (United States)

    Sokolov, A. S.; Vinokurov, N. A.

    1994-03-01

    The use of optimal longitudinal phase-energy motion conditions for bunched electrons in a recirculating RF accelerator gives the possibility to increase the final electron peak current and, correspondingly, the FEL gain. The computer code RECFEL, developed for simulations of the longitudinal compression of electron bunches with high average current, essentially loading the cw RF cavities of the recirculator-recuperator, is briefly described and illustrated by some computational results.

  9. Electron-phonon nonequilibrium during ultrashort pulsed laser heating of metals

    Science.gov (United States)

    Smith, Andrew Neil

    2001-10-01

    Ultrashort pulsed lasers have repeatedly been demonstrated as an effective tool for the observation of transport properties on atomistic time and length scales. Accordingly, the number of applications of these types of lasers as diagnostic tools is rapidly increasing. To effectively use these tools, precise knowledge of the energy deposition mechanism is absolutely necessary. The accepted model for ultrashort pulsed laser heating is the ``Two Temperature Model'' which assumes equilibrium electron and phonon distributions that are not in equilibrium with each other. Recently the applicability of the ``Two Temperature Model'' has received some scrutiny for very low and very high intensity application. This model gave rise to the electron-phonon coupling factor, which, when combined with the temperature difference between the two systems, represents the rate of energy transfer for small perturbations in temperature. However, numerous applications use moderate to high intensity ultrashort pulses, which create far more than small perturbations in temperature. In this investigation the temperature dependence of the electron-phonon coupling factor, electron heat capacity, and thermal conductivity are examined for significant changes in the electron temperature. Experimental results are presented for transient thermoreflectance data taken at moderate fluences. A significant discrepancy is apparent between the two temperature model and the experimental data taken on Au. This problem was originally thought to arise from increased electron- phonon coupling for moderate changes in the electron temperature. Investigation into the temperature dependence of the electron-phonon coupling factor did not support this hypothesis. It was discovered that the discrepancy was due to a nonlinear relationship between changes in the electron temperature and changes in reflectance. The incident probe energy used when taking the experimental data was 1.5 eV, which is significantly less than

  10. Transport studies of LPA electron beam towards the FEL amplification at COXINEL

    Energy Technology Data Exchange (ETDEWEB)

    Khojoyan, M., E-mail: martin.khojoyan@synchrotron-soleil.fr; Briquez, F.; Labat, M.; Loulergue, A.; Marcouillé, O.; Marteau, F.; Sharma, G.; Couprie, M.E.

    2016-09-01

    Laser Plasma Acceleration (LPA) [1] is an emerging concept enabling to generate electron beams with high energy, high peak current and small transverse emittance within a very short distance. The use of LPA can be applied to the Free Electron Laser (FEL) [2] case in order to investigate whether it is suitable for the light amplification in the undulator. However, capturing and guiding of such beams to the undulator is very challenging, because of the large divergence and high energy spread of the electron beams at the plasma exit, leading to large chromatic emittances. A specific beam manipulation scheme was recently proposed for the COXINEL (Coherent X-ray source inferred from electrons accelerated by laser) setup, which makes an advantage from the intrinsically large chromatic emittance of such beams [3]. The electron beam transport is studied using two simulation codes: a SOLEIL in-house one and ASTRA [4]. The influence of the collective effects on the electron beam performance is also examined.

  11. Transport studies of LPA electron beam towards the FEL amplification at COXINEL

    CERN Document Server

    Khojoyan, M; Labat, M; Loulergue, A; Marcouillé, O; Marteau, F; Sharma, G; Couprie, M E

    2016-01-01

    Laser Plasma Acceleration (LPA) [1] is an emerging concept enabling to generate electron beams with high energy, high peak current and small transverse emittance within a very short distance. The use of LPA can be applied to the Free Electron Laser (FEL) [2] case in order to investigate whether it is suitable for the light amplification in the undulator. However, capturing and guiding of such beams to the undulator is very challenging, because of the large divergence and high energy spread of the electron beams at the plasma exit, leading to large chromatic emittances. A specific beam manipulation scheme was recently proposed for the COXINEL (Coherent X-ray source inferred from electrons accelerated by laser) setup, which makes an advantage from the intrinsically large chromatic emittance of such beams [3]. The electron beam transport is studied using two simulation codes: a SOLEIL in-house one and ASTRA [4]. The influence of the collective effects on the electron beam performance is also examined.

  12. Electron rescattering at metal nanotips induced by ultrashort laser pulses

    Science.gov (United States)

    Wachter, G.; Lemell, C.; Burgdörfer, J.

    2014-04-01

    We theoretically investigate the interaction of moderate intensity near-infrared few cycle laser pulses with nano-scale metal tips. Local field enhancement in a nanometric region around the tip apex triggers coherent electron emission on the nanometer length and femtosecond time scale. The quantum dynamics at the surface are simulated with time-dependent density functional theory (TDDFT) and interpreted based on the simple man's model. We investigate the dependence of the emitted electron spectra on the laser wavelength.

  13. Electron-lattice kinetics of metals heated by ultrashort laser pulses

    Science.gov (United States)

    Falkovsky, L. A.; Mishchenko, E. G.

    1999-01-01

    We propose a kinetic model of transient nonequilibrium phenomena in metals exposed to ultrashort laser pulses when heated electrons affect the lattice through direct electron-phonon interaction. This model describes the destruction of a metal under intense laser pumping. We derive the system of equations for the metal, which consists of hot electrons and a cold lattice. Hot electrons are described with the help of the Boltzmann equation and equation of thermoconductivity. We use the equations of motion for lattice displacements with the electron force included. The lattice deformation is estimated immediately after the laser pulse up to the time of electron temperature relaxation. An estimate shows that the ablation regime can be achieved.

  14. Electron rescattering at metal nanotips induced by ultrashort laser pulses

    CERN Document Server

    Wachter, Georg; Burgdörfer, Joachim; Schenk, Markus; Krüger, Michael; Hommelhoff, Peter

    2012-01-01

    We report on the first investigation of plateau and cut-off structures in photoelectron spectra from nano-scale metal tips interacting with few-cycle near-infrared laser pulses. These hallmarks of electron rescattering, well-known from atom-laser interaction in the strong-field regime, appear at remarkably low laser intensities with nominal Keldysh parameters of the order of $\\gtrsim 10$. Quantum and quasi-classical simulations reveal that a large field enhancement near the tip and the increased backscattering probability at a solid-state target play a key role. Plateau electrons are by an order of magnitude more abundant than in comparable atomic spectra, reflecting the high density of target atoms at the surface. The position of the cut-off serves as an in-situ probe for the locally enhanced electric field at the tip apex.

  15. X-ray FEL based on harmonics generation and electron beam outcoupling

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Burnham, B. [Duke Univ., Durham, NC (United States)

    1995-12-31

    Electron beam outcoupling was suggested by N. A. Vinokurov as a method of optics independent outcoupling for high power FELs. The bunching of the electron beam is provided in a master oscillator. The prebunched electron beam then radiates coherently into an additional wiggler called the radiator. The electron beam is turned by an achromatic bend into this wiggler and its radiation propagates with a small angle with respect to the OK-4 optical axis. Thus, the radiation will pass around the mirror of the master oscillator optical cavity and can then be utilized. This scheme is perfectly suited for harmonic generation if the radiator wiggler is tuned on one of the master oscillator wavelength harmonics. This system is reminiscent of a klystron operating on a harmonic of the reference frequency. In this paper we present the theory of this device, its spectral and spatial characteristics of radiation, the optimization of the master oscillator, the achromatic bend and bunching for harmonic generation, and influence of beam parameters (energy spread, emittance, etc.) on generated power. Examples of possible storage ring and linac driven systems are discussed.

  16. X-ray FEL based on harmonics generation and electron beam outcoupling

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Burnham, B. [Duke Univ., Durham, NC (United States)

    1995-12-31

    Electron beam outcoupling was suggested by N. A. Vinokurov as a method of optics independent outcoupling for high power FELs. The bunching of the electron beam is provided in a master oscillator. The prebunched electron beam then radiates coherently into an additional wiggler called the radiator. The electron beam is turned by an achromatic bend into this wiggler and its radiation propagates with a small angle with respect to the OK-4 optical axis. Thus, the radiation will pass around the mirror of the master oscillator optical cavity and can then be utilized. This scheme is perfectly suited for harmonic generation if the radiator wiggler is tuned on one of the master oscillator wavelength harmonics. This system is reminiscent of a klystron operating on a harmonic of the reference frequency. In this paper we present the theory of this device, its spectral and spatial characteristics of radiation, the optimization of the master oscillator, the achromatic bend and bunching for harmonic generation, and influence of beam parameters (energy spread, emittance, etc.) on generated power. Examples of possible storage ring and linac driven systems are discussed.

  17. Emittance studies at the Los Alamos National Laboratory Free-Electron Laser (FEL)

    Science.gov (United States)

    Carlsten, B. E.; Feldman, D. W.; Lumpkin, A. H.; Stein, W. E.; Warren, R. W.

    Recent emittance studies at the Los Alamos Free-Electron Laser (FEL) have indicated several areas of concern in the linac and beamline feeding the wiggler. Four emittance growth mechanisms of special importance have been studied. First, a rapid growth of the electron beam's emittance immediately after the spherical gridded Pierce gun resulted, in part, from the long time required for our pulsing electronics to ramp the grid voltage up at the start and down at the end of the pulse, which created a pulse with a cosine-like current distribution as a function of time. The growth was compounded by the extremely small radial beam size (almost a waist) leaving the gun. In addition, we saw evidence of electrostatic charging of the insulators in the gun, reducing the quality of the electron beam further. Second, the action of the solenoidal focusing fields in the low-voltage bunching region was studied, and criteria for a minimum emittance growth were established. Third, maximum misalignment angles and displacements for various elements of the beamline were calculated for the desired low emittance growth. Finally, emittance growth in the horizontal dimension through the nonisochronous bend caused by varying energy depression on the particles due to longitudinal wake fields was both calculated and observed. In addition, we measured energy depressions caused by the wake fields generated by various other elements in the beamline. Strategies were developed to relieve the magnitude of these wake-field effects.

  18. Terahertz coherent transition radiation based on an ultrashort electron bunching beam

    Science.gov (United States)

    Liu, Wen-Xin; Huang, Wen-Hui; Du, Ying-Chao; Yan, Li-Xin; Wu, Dai; Tang, Chuan-Xiang

    2011-07-01

    The experimental result of terahertz (THz) coherent transition radiation generated from an ultrashort electron bunching beam is reported. During this experiment, the window for THz transmission from ultrahigh vacuum to free air is tested. The compact measurement system which can simultaneously test the THz wave power and frequency is built and proofed. With the help of improved Martin—Puplett interferometer and Kramers—Krong transform, the longitudinal bunch length is measured. The results show that the peak power of THz radiation wave is more than 80 kW, and its radiation frequency is from 0.1 THz to 1.5 THz.

  19. Intense ultrashort pulse generation using the JAERI far-infrared free electron laser

    CERN Document Server

    Nagai, R; Nishimori, N; Kikuzawa, N; Sawamura, M; Minehara, E J

    2002-01-01

    An intense ultrashort optical pulse has been quasi-continuously generated using a superconducting RF linac-based free-electron laser at a wavelength of 22.5 mu m. The pulse shape and width are measured by second-order optical autocorrelation with a birefringent Te crystal. At synchronism of the optical resonator, the pulse shape is a smooth single pulse with an FWHM width of 255 fs and energy of 74 mu J. A train of subpulses is developed by increasing the desynchronism of the optical resonator. The measured results are in good agreement with numerical simulation.

  20. Electron acceleration mechanisms in the interaction of ultrashort lasers with underdense plasmas: Experiments and simulations

    Energy Technology Data Exchange (ETDEWEB)

    Faure, J.; Lefebvre, E.; Malka, V.; Marques, J.-R.; Amiranoff, F.; Solodov, A.; Mora, P.

    2002-06-30

    An experiment investigating the production of relativistic electrons from the interaction of ultrashort multi-terawatt laser pulses with an underdense plasma is presented. Electrons were accelerated to tens of MeV and the maximum electron energy increased as the plasma density decreased. Simulations have been performed in order to model the experiment. They show a good agreement with the trends observed in the experiment and the spectra of accelerated electrons could be reproduced successfully. The simulations have been used to study the relative contribution of the different acceleration mechanisms: plasma wave acceleration, direct laser acceleration and stochastic heating. The results show that in low density case (1 percent of the critical density) acceleration by laser is dominant mechanism. The simulations at high density also suggest that direct laser acceleration is more efficient that stochastic heating.

  1. Generation of GW radiation pulses from a VUV free-electron laser operating in the femtosecond regime.

    Science.gov (United States)

    Ayvazyan, V; Baboi, N; Bohnet, I; Brinkmann, R; Castellano, M; Castro, P; Catani, L; Choroba, S; Cianchi, A; Dohlus, M; Edwards, H T; Faatz, B; Fateev, A A; Feldhaus, J; Flöttmann, K; Gamp, A; Garvey, T; Genz, H; Gerth, Ch; Gretchko, V; Grigoryan, B; Hahn, U; Hessler, C; Honkavaara, K; Hüning, M; Ischebeck, R; Jablonka, M; Kamps, T; Körfer, M; Krassilnikov, M; Krzywinski, J; Liepe, M; Liero, A; Limberg, T; Loos, H; Luong, M; Magne, C; Menzel, J; Michelato, P; Minty, M; Müller, U-C; Nölle, D; Novokhatski, A; Pagani, C; Peters, F; Pflüger, J; Piot, P; Plucinski, L; Rehlich, K; Reyzl, I; Richter, A; Rossbach, J; Saldin, E L; Sandner, W; Schlarb, H; Schmidt, G; Schmüser, P; Schneider, J R; Schneidmiller, E A; Schreiber, H-J; Schreiber, S; Sertore, D; Setzer, S; Simrock, S; Sobierajski, R; Sonntag, B; Steeg, B; Stephan, F; Sytchev, K P; Tiedtke, K; Tonutti, M; Treusch, R; Trines, D; Türke, D; Verzilov, V; Wanzenberg, R; Weiland, T; Weise, H; Wendt, M; Will, I; Wolff, S; Wittenburg, K; Yurkov, M V; Zapfe, K

    2002-03-11

    Experimental results are presented from vacuum-ultraviolet free-electron laser (FEL) operating in the self-amplified spontaneous emission (SASE) mode. The generation of ultrashort radiation pulses became possible due to specific tailoring of the bunch charge distribution. A complete characterization of the linear and nonlinear modes of the SASE FEL operation was performed. At saturation the FEL produces ultrashort pulses (30-100 fs FWHM) with a peak radiation power in the GW level and with full transverse coherence. The wavelength was tuned in the range of 95-105 nm.

  2. Ultrafast Coherent Control and Characterization of Surface Reactions using FELs

    CERN Document Server

    Ogasawara, Hirohito; Nordlund, Dennis

    2005-01-01

    The microscopic understanding of surface chemistry requires a detailed understanding of the dynamics of elementary processes at surfaces. The ultrashort electron pulse obtained in the linear accelerator to feed the FEL can be used for generation of coherent synchrotron radiation in the low energy THz regime. With the current parameters for LCLS this corresponds to radiation with energy corresponding to excitations of low-energy vibrational modes of molecules on surfaces or phonons in substrates. The coherent radiation can coherently manipulate atoms or molecules on surfaces. In this respect a chemical reaction can be initiated by coherent atomic motion along a specific reaction coordinate. Since the THz radiation is generated from the same source as the FEL radiation full-time synchronization for pump-probe experiments will be possible. The possibility to perform time-resolved X-ray Emission Spectroscopy (XES) and X-ray Photoelectron Spectroscopy (XPS) measurements as a probe of chemical dynamics is an exciti...

  3. Analysis of the eigenvalue equation of the FEL amplifier with axisymmetric electron beam and diaphragm focusing line

    Science.gov (United States)

    Saldin, E. L.; Schneidmiller, E. A.; Yurkov, M. V.

    1996-02-01

    The paper presents analysis of the eigenvalue problem of the FEL amplifier with axisymmetric electron beam and diaphragm focusing line. This novel type of an FEL amplifier has perspective to be used for applications where high average and peak radiation power is required [E.L. Saldin et al., Nucl. Instr. and meth. A 361 (1995) 317; these Proceedings, Nucl. Instr. and Meth. 375 (1996) 389; Nucl. Instr. and Meth. A 361 (1995) 101]. An FEL model is discussed wherein diffraction effects, space charge fields and energy spread of electrons in the beam are taken into account. To take into account diffraction effects at the diaphragms we apply the rigorous impedance boundary conditions proposed by Veinstein. The rigorous solutions of the eigenvalue problem have been found for the stepped electron beam profile. Analytical expressions for eigenfunctions of active open waveguide and formulae of their expansion in the eigenfunctions of passive open waveguide, are derived, too. Asymptotic behaviour of the obtained solutions is studied in details.

  4. FEL-accelerator related diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Jordan; David Douglas; Stephen V. Benson; Pavel Evtuschenko

    2007-08-02

    Free Electron Lasers (FEL) present a unique set of beam parameters to the diagnostics suite. The FEL requires characterization of the full six dimensional phase space of the electron beam at the wiggler and accurate alignment of the electron beam to the optical mode of the laser. In addition to the FEL requirements on the diagnostics suite, the Jefferson Lab FEL is operated as an Energy Recovered Linac (ERL) which imposes additional requirements on the diagnostics. The ERL aspect of the Jefferson Lab FEL requires that diagnostics operate over a unique dynamic range and operate with simultaneous transport of the accelerated and energy recovered beams. This talk will present how these challenges are addressed at the Jefferson Lab FEL.

  5. Temporal characterization of ultrashort ionization-injected electron bunches generated from a laser wakefield accelerator

    CERN Document Server

    Zhang, C J; Wan, Y; Guo, B; Pai, C -H; Wu, Y P; Li, F; Chu, H -H; Gu, Y Q; Mori, W B; Joshi, C; Wang, J; Lu, W

    2016-01-01

    A new concept to diagnose the temporal characteristics of ultrashort electron bunches generated from a laser wakefield accelerator is described. When the ionization-injected bunch interacts with the back of the drive laser it is deflected and stretched along the direction of the electric field of the laser. Upon exiting the plasma if the bunch goes through a narrow slit in front of the dipole magnet that disperses the electrons in the plane of the laser polarization, it can form a series of bunchlets that have different energies but separated by half a laser wavelength. By analyzing the modulated energy spectrum, the beam current profile and the longitudinal (energy versus time) phase space are recovered. This concept is demonstrated through particle-in-cell simulations and experiment.

  6. Nanosecond discharge in sulfur hexafluoride and the generation of an ultrashort avalanche electron beam

    Science.gov (United States)

    Baksht, E. Kh.; Burachenko, A. G.; Erofeev, M. V.; Lomaev, M. I.; Rybka, D. V.; Sorokin, D. A.; Tarasenko, V. F.

    2008-06-01

    A discharge in the presence of a nonuniform electric field and the generation of an ultrashort avalanche electron beam (UAEB) are studied in the insulating gas SF6 at the pressures 0.01 2.50 atm. High-voltage nanosecond pulses (about 150 and 250 kV) and the voltage pulses with an amplitude of 25 kV and a duration of tens of nanoseconds are applied across the gap. An electron beam is obtained behind the AlBe foil with a thickness of 45 μm at a sulfur hexafluoride pressure in a gas-filled diode of up to 2 atm. It is demonstrated that, at relatively high pressures (greater than 1 atm) and in the presence of high-voltage nanosecond pulses across the gap, the UAEB pulse FWHM increases. The spectra of the diffuse and contracted discharges in sulfur hexafluoride are measured.

  7. Two FEL`s in one

    Energy Technology Data Exchange (ETDEWEB)

    Epp, V. [Tomsk Pedagogical Institute (Russian Federation); Nikitin, M. [Tomsk Polytechnical Univ. (Russian Federation)

    1995-12-31

    A new scheme for a FEL operation is proposed. The conventional principle of FEL operation is means that the electron bunch passes through the interaction area of FEL only in one direction. We suggest another possible layout which implies that the electron bunch makes a turn after leaving the wiggler and entries the wiggler at the same end. Actually the wiggler is a kind of a bridge between two storage rings. The electron bunches on the orbit are expected to be adjusted in the way that after one of them leaves the wiggler, another one enters in the opposite direction and in the proper phase with the wave pulse emitted by the previous bunch. So the electron bunch comes in interaction with the amplified electromagnetic wave in both directions i.e. twice per period. It is especially important for the short wavelength FELs, because each reflection from the mirror causes a significant losses of the wave magnitude. The proposed design gives one interaction per each reflection instead of one interaction per two reflections in the traditional scheme. Another way to realize the suggested principle of operating is to insert the wiggler in the electron-positron storage ring. But this layout can be less efficient because of low intensity of the positron beam. The comparison study of radiation from different types of described double wigglers is fulfilled. The synchronization problems are discussed in this paper.

  8. Development of an ultrashort table-top electron and x-ray source pumped by laser

    Science.gov (United States)

    Girardeau-Montaut, Jean-Pierre; Kiraly, Bela; Girardeau-Montaut, Claire; Leboutet, Hubert

    1999-09-01

    We report on the design of the CIBER-X source which is a new laser driven table-top ultrashort electron and x-ray source. X-ray pulses are produced by a three-step process which consists of the electron pulse production from a thin metallic photocathode illuminated by picosecond 213 nm laser pulses with 16 ps duration. The electrons are accelerated in the diode by a cw electric field of 11 MV/m, and the photoinjector produces a single 70 - 100 keV electron pulse of approximately 0,5 nC and approximately 20 A peak current at a repetition rate of 10 Hz. The gun is a standard Pierce diode electrode type, the electrons leaving the diode through a hole made in the anode. The electrons are then transported along a path approximately 20 cm long, and are focused by two magnetic fields produced by electromagnetic coils. Finally, the x-rays are produced by the impact of electrons on a massive target of Tm. Simulations of geometrical and energetic characteristics of the complete source were done previously with assistance of the code PIXEL1. Finally, experimental performances of electron and x-ray bursts are discussed.

  9. Tapered undulators for SASE FELs

    CERN Document Server

    Fawley, W M; Vinokurov, N A

    2002-01-01

    We discuss the use of tapered undulators to enhance the performance of free-electron lasers (FELs) based upon self-amplified spontaneous emission, where the radiation tends to have a relatively broad bandwidth and limited temporal coherence. Using the polychromatic FEL simulation code GINGER, we numerically demonstrate the effectiveness of tapered undulators for parameters corresponding to the Argonne low-energy undulator test line FEL and the proposed linac coherent light source.

  10. A simple method for the determination of the structure of ultrashort relativistic electron bunches

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2004-01-01

    In this paper we propose a new method for measurements of the longitudinal profile of 100 femtosecond electron bunches for X-ray Free Electron Lasers (XFELs). The method is simply the combination of two well-known techniques, which where not previously combined to our knowledge. We use seed 10-ps 1047 nm quantum laser to produce exact optical replica of ultrafast electron bunches. The replica is generated in apparatus which consists of an input undulator (energy modulator), and the short output undulator (radiator) separated by a dispersion section. The radiation in the output undulator is excited by the electron bunch modulated at the optical wavelength and rapidly reaches 100 MW-level peak power. We then use the now-standard method of ultrashort laser pulse-shape measurement, a tandem combination of autocorrelator and spectrum (FROG -- frequency resolved optical gating). The FROG trace of the optical replica of electron bunch gives accurate and rapid electron bunch shape measurements in a way similar to a f...

  11. The SPARC project: a high-brightness electron beam source at LNF to drive a SASE-FEL experiment

    Energy Technology Data Exchange (ETDEWEB)

    Alesini, D.; Bertolucci, S.; Biagini, M.E.; Biscari, C.; Boni, R.; Boscolo, M.; Castellano, M.; Clozza, A.; Di Pirro, G.; Drago, A.; Esposito, A.; Ferrario, M. E-mail: massimo.ferrario@lnf.infn.it; Fusco, V.; Gallo, A.; Ghigo, A.; Guiducci, S.; Incurvati, M.; Laurelli, P.; Ligi, C.; Marcellini, F.; Migliorati, M.; Milardi, C.; Palumbo, L.; Pellegrino, L.; Preger, M.; Raimondi, P.; Ricci, R.; Sanelli, C.; Sgamma, F.; Spataro, B.; Serio, M.; Stecchi, A.; Stella, A.; Tazzioli, F.; Vaccarezza, C.; Vescovi, M.; Vicario, C.; Zobov, M.; Acerbi, E.; Alessandria, F.; Barni, D.; Bellomo, G.; Boscolo, I.; Broggi, F.; Cialdi, S.; DeMartinis, C.; Giove, D.; Maroli, C.; Petrillo, V.; Rome' , M.; Serafini, L.; Chiadroni, E.; Felici, G.; Levi, D.; Mastrucci, M.; Mattioli, M.; Medici, G.; Petrarca, G.S.; Catani, L.; Cianchi, A.; D' Angelo, A.; Di Salvo, R.; Fantini, A.; Moricciani, D.; Schaerf, C.; Bartolini, R.; Ciocci, F.; Dattoli, G.; Doria, A.; Flora, F.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Mezi, L.; Ottaviani, P.L.; Picardi, L.; Quattromini, M.; Renieri, A.; Ronsivalle, C.; Avaldi, L.; Carbone, C.; Cricenti, A.; Pifferi, A.; Perfetti, P.; Prosperi, T.; Albertini, V. Rossi; Quaresima, C.; Zema, N

    2003-07-11

    The Project Sorgente Pulsata e Amplificata di Radiazione Coerente (SPARC), proposed by a collaboration among ENEA-INFN-CNR-Universita' di Tor Vergata-INFM-ST, was recently approved by the Italian Government and will be built at LNF. The aim of the project is to promote an R and D activity oriented to the development of a coherent ultra-brilliant X-ray source in Italy. This collaboration has identified a program founded on two main issues: the generation of ultra-high peak brightness electron beams and of resonant higher harmonics in the SASE-FEL process, as presented in this paper.

  12. Initial observations of high-charge, low-emittance electron beams at HIBAF (High Brightness Accelerator FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Feldman, R.B.; Carsten, B.E.; Feldman, D.W.; Sheffield, R.L.; Stein, W.E.; Johnson, W.J.; Thode, L.E.; Bender, S.C.; Busch, G.E.

    1990-01-01

    We report our initial measurements of bright (high-charge, low-emittance) electron beams generated at the Los Alamos High Brightness Accelerator FEL (HIBAF) Facility. Normalized emittance values of less than 50 {pi} mm-mrad for charges ranging from 0.7 to 8.7 nC were obtained for single micropulses at a y-waist and at an energy of 14.7 MeV. These measurements were part of the commissioning campaign on the HIBAF photoelectric injector. Macropulse measurements have also been performed and are compared with PARMELA simulations. 5 refs., 8 figs., 3 tabs.

  13. Ultra-short channel GaN high electron mobility transistor-like Gunn diode with composite contact

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ying; Yang, Lin' an, E-mail: layang@xidian.edu.cn; Wang, Zhizhe; Chen, Qing; Huang, Yonghong; Dai, Yang; Chen, Haoran; Zhao, Hongliang; Hao, Yue [The State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2014-09-07

    We present a numerical analysis on an ultra-short channel AlGaN/GaN HEMT-like planar Gunn diode based on the velocity-field dependence of two-dimensional electron gas (2-DEG) channel accounting for the ballistic electron acceleration and the inter-valley transfer. In particular, we propose a Schottky-ohmic composite contact instead of traditional ohmic contact for the Gunn diode in order to significantly suppress the impact ionization at the anode side and shorten the “dead zone” at the cathode side, which is beneficial to the formation and propagation of dipole domain in the ultra-short 2-DEG channel and the promotion of conversion efficiency. The influence of the surface donor-like traps on the electron domain in the 2-DEG channel is also included in the simulation.

  14. Ultra-short channel GaN high electron mobility transistor-like Gunn diode with composite contact

    Science.gov (United States)

    Wang, Ying; Yang, Lin'an; Wang, Zhizhe; Chen, Qing; Huang, Yonghong; Dai, Yang; Chen, Haoran; Zhao, Hongliang; Hao, Yue

    2014-09-01

    We present a numerical analysis on an ultra-short channel AlGaN/GaN HEMT-like planar Gunn diode based on the velocity-field dependence of two-dimensional electron gas (2-DEG) channel accounting for the ballistic electron acceleration and the inter-valley transfer. In particular, we propose a Schottky-ohmic composite contact instead of traditional ohmic contact for the Gunn diode in order to significantly suppress the impact ionization at the anode side and shorten the "dead zone" at the cathode side, which is beneficial to the formation and propagation of dipole domain in the ultra-short 2-DEG channel and the promotion of conversion efficiency. The influence of the surface donor-like traps on the electron domain in the 2-DEG channel is also included in the simulation.

  15. Comprehensive z-dependent measurements of electron-beam microbunching using COTR in a saturated SASE FEL

    CERN Document Server

    Lumpkin, Alex H; Lewellen, J W; Berg, W; Biedron, S G; Borland, M; Chae, Y; Erdmann, M; Huang, Z; Kim, K J; Li, Y; Milton, S V; Moog, E; Rule, D W; Sajaev, Vadim; Yang, B X

    2002-01-01

    We report the initial, comprehensive set of z-dependent measurements of electron-beam microbunching using coherent optical transition radiation (Cot) in a saturated self-amplified spontaneous emission (SASE) free-electron laser (FEL) experiment. In this case the FEL was operated near 530 nm using an enhanced facility including a bunch-compressed photocathode gun electron beam, linac, and 21.6 m of undulator length. The longitudinal microbunching was tracked by inserting a metal foil and mirror after each of the nine 2.4-m-long undulators and measuring the visible COTR spectra, intensity, angular, distribution, and spot size. We observed for the first time the z-dependent transition of the COTR spectra from simple lines to complex structure/sidebands near saturation. We also observed the change in the microbunching fraction after saturation, multiple fringes in the COTR interferogram that are consistent with involvement of a smaller core of the e-beam transverse distribution, and the second harmonic content of...

  16. Self-amplified spontaneous emission free-electron laser with an energy-chirped electron beam and undulator tapering.

    Science.gov (United States)

    Giannessi, L; Bacci, A; Bellaveglia, M; Briquez, F; Castellano, M; Chiadroni, E; Cianchi, A; Ciocci, F; Couprie, M E; Cultrera, L; Dattoli, G; Filippetto, D; Del Franco, M; Di Pirro, G; Ferrario, M; Ficcadenti, L; Frassetto, F; Gallo, A; Gatti, G; Labat, M; Marcus, G; Moreno, M; Mostacci, A; Pace, E; Petralia, A; Petrillo, V; Poletto, L; Quattromini, M; Rau, J V; Ronsivalle, C; Rosenzweig, J; Rossi, A R; Rossi Albertini, V; Sabia, E; Serluca, M; Spampinati, S; Spassovsky, I; Spataro, B; Surrenti, V; Vaccarezza, C; Vicario, C

    2011-04-08

    We report the first experimental implementation of a method based on simultaneous use of an energy chirp in the electron beam and a tapered undulator, for the generation of ultrashort pulses in a self-amplified spontaneous emission mode free-electron laser (SASE FEL). The experiment, performed at the SPARC FEL test facility, demonstrates the possibility of compensating the nominally detrimental effect of the chirp by a proper taper of the undulator gaps. An increase of more than 1 order of magnitude in the pulse energy is observed in comparison to the untapered case, accompanied by FEL spectra where the typical SASE spiking is suppressed.

  17. Ultrashort Laser Pulse Phenomena

    CERN Document Server

    Diels, Jean-Claude

    2006-01-01

    Ultrashort Laser Pulse Phenomena, 2e serves as an introduction to the phenomena of ultra short laser pulses and describes how this technology can be used to examine problems in areas such as electromagnetism, optics, and quantum mechanics. Ultrashort Laser Pulse Phenomena combines theoretical backgrounds and experimental techniques and will serve as a manual on designing and constructing femtosecond (""faster than electronics"") systems or experiments from scratch. Beyond the simple optical system, the various sources of ultrashort pulses are presented, again with emphasis on the basic

  18. Capturing relativistic wakefield structures in plasmas using ultrashort high-energy electrons as a probe.

    Science.gov (United States)

    Zhang, C J; Hua, J F; Xu, X L; Li, F; Pai, C-H; Wan, Y; Wu, Y P; Gu, Y Q; Mori, W B; Joshi, C; Lu, W

    2016-07-11

    A new method capable of capturing coherent electric field structures propagating at nearly the speed of light in plasma with a time resolution as small as a few femtoseconds is proposed. This method uses a few femtoseconds long relativistic electron bunch to probe the wake produced in a plasma by an intense laser pulse or an ultra-short relativistic charged particle beam. As the probe bunch traverses the wake, its momentum is modulated by the electric field of the wake, leading to a density variation of the probe after free-space propagation. This variation of probe density produces a snapshot of the wake that can directly give many useful information of the wake structure and its evolution. Furthermore, this snapshot allows detailed mapping of the longitudinal and transverse components of the wakefield. We develop a theoretical model for field reconstruction and verify it using 3-dimensional particle-in-cell (PIC) simulations. This model can accurately reconstruct the wakefield structure in the linear regime, and it can also qualitatively map the major features of nonlinear wakes. The capturing of the injection in a nonlinear wake is demonstrated through 3D PIC simulations as an example of the application of this new method.

  19. Capturing relativistic wake eld structures in plasmas using ultrashort high-energy electrons as a probe

    CERN Document Server

    Zhang, C J; Xu, X L; Li, F; Pai, C -H; Wan, Y; Wu, Y P; Gu, Y Q; Mori, W B; Joshi, C; Lu, W

    2016-01-01

    A new method capable of capturing coherent electric field structures propagating at nearly the speed of light in plasma with a time resolution as small as a few femtoseconds is proposed. This method uses a few femtoseconds long relativistic electron bunch to probe the wake produced in a plasma by an intense laser pulse or an ultra-short relativistic charged particle beam. As the probe bunch traverses the wake, its momentum is modulated by the electric field of the wake, leading to a density variation of the probe after free-space propagation. This variation of probe density produces a snapshot of the wake that can directly give many useful information of the wake structure and its evolution. Furthermore, this snapshot allows detailed mapping of the longitudinal and transverse components of the wakefield. We develop a theoretical model for field reconstruction and verify it using 3-dimensional particle-in-cell (PIC) simulations. This model can accurately reconstruct the wakefield structure in the linear regime...

  20. Capturing relativistic wakefield structures in plasmas using ultrashort high-energy electrons as a probe

    Science.gov (United States)

    Zhang, C. J.; Hua, J. F.; Xu, X. L.; Li, F.; Pai, C.-H.; Wan, Y.; Wu, Y. P.; Gu, Y. Q.; Mori, W. B.; Joshi, C.; Lu, W.

    2016-07-01

    A new method capable of capturing coherent electric field structures propagating at nearly the speed of light in plasma with a time resolution as small as a few femtoseconds is proposed. This method uses a few femtoseconds long relativistic electron bunch to probe the wake produced in a plasma by an intense laser pulse or an ultra-short relativistic charged particle beam. As the probe bunch traverses the wake, its momentum is modulated by the electric field of the wake, leading to a density variation of the probe after free-space propagation. This variation of probe density produces a snapshot of the wake that can directly give many useful information of the wake structure and its evolution. Furthermore, this snapshot allows detailed mapping of the longitudinal and transverse components of the wakefield. We develop a theoretical model for field reconstruction and verify it using 3-dimensional particle-in-cell (PIC) simulations. This model can accurately reconstruct the wakefield structure in the linear regime, and it can also qualitatively map the major features of nonlinear wakes. The capturing of the injection in a nonlinear wake is demonstrated through 3D PIC simulations as an example of the application of this new method.

  1. Two-dimensional angular energy spectrum of electrons accelerated by the ultra-short relativistic laser pulse

    Energy Technology Data Exchange (ETDEWEB)

    Borovskiy, A. V. [Department of Computer Science and Cybernetics, Baikal State University of Economics and Law, 11 Lenin Street, Irkutsk 664003 (Russian Federation); Galkin, A. L. [Coherent and Nonlinear Optics Department, A.M. Prokhorov General Physics Institute of the RAS, 38 Vavilov Street, Moscow 119991 (Russian Federation); Department of Physics of MBF, Pirogov Russian National Research Medical University, 1 Ostrovitianov Street, Moscow 117997 (Russian Federation); Kalashnikov, M. P., E-mail: galkin@kapella.gpi.ru [Max-Born-Institute for Nonlinear Optics and Short-Time Spectroscopy, 2a Max-Born-Strasse, Berlin 12489 (Germany)

    2015-04-15

    The new method of calculating energy spectra of accelerated electrons, based on the parameterization by their initial coordinates, is proposed. The energy spectra of electrons accelerated by Gaussian ultra-short relativistic laser pulse at a selected angle to the axis of the optical system focusing the laser pulse in a low density gas are theoretically calculated. The two-peak structure of the electron energy spectrum is obtained. Discussed are the reasons for its appearance as well as an applicability of other models of the laser field.

  2. Exact and variational solutions of 3D eigenmodes in high gain FELs [Exact and variational solutions of 3D eigenmodes in high gain free electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Ming [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2000-05-18

    Exact solution and variational approximation of eigenmodes in high gain FELs are presented. These eigenmodes specify transverse profiles and exponential growth rates of the laser field before saturation. They are self-consistent solutions of coupled Maxwell–Vlasov equations describing FEL interaction taking into account the effects due to energy spread, emittance and betatron oscillations of the electron beam, as well as diffraction and optical guiding of the laser field. A new formalism of scaling is introduced and based on which solutions in various limiting cases are discussed. Additionally, a fitting formula is obtained from interpolating the variational solution for quick calculation of exponential growth rate of the fundamental mode.

  3. Design Formulas for VUV and X-Ray FELs

    CERN Document Server

    Saldin, Evgeny L; Yurkov, Mikhail V

    2004-01-01

    Simple formulas for optimization of VUV and X-ray SASE FELs are presented. The FEL gain length and the optimal beta-function are explicitly expressed in terms of the electron beam and undulator parameters. The FEL saturation length is estimated taking into account energy diffusion due to quantum fluctuations of the undulator radiation. Examples of the FEL optimization are given. Parameters of a SASE FEL, operating at the Compton wavelength, are suggested.

  4. Contributions to the FEL2005 conference

    Energy Technology Data Exchange (ETDEWEB)

    Grimm, O. (comp.)

    2005-07-01

    The following topics were dealt with: First lasing at 32 nm of the VUV-FEL at DESY, properties of the radiation from VUV-FEL at DESY, accelerator lay out and physics of X-ray free-electron lasers, bunch compression stability dependence on RF parameters, undulator systems and photon diagnostic for the European XFEL project, electron beam characterization at PITZ and the VUV-FEL at DESY, high precision optical synchronization systems for X-ray free electron lasers, optical laser synnchronized for the DESY VUV-FEL for two-color pump probe experiments, properties of the third harmonic of the SASE FEL radiation, detector response and beam line transmission measurements with far-infrared radiation, upgrades of the laser beam-line at PITZ, bunch length measurements using a Martin-Puplett interferometer at the VUV-FEL, next generation synchronization system for the VUV-FEL at DESY, transverse electron beam diagnostics at the VYV-FEL at DESY, the infrared undulator project at the VUV-FEL, misconceptions regarding second harmonic generation in X-ray free-electron lasers, influence of an energy chirp on SASE FEL operation, design considerations for the 4GLS XUV-FEL, broadband single shot spectrometer, commissioning of TTF2 bunch compressors for 20 fs SASE source, observation of femtosecond bunch length using a transverse deflecting structure, measurement of slice-emittance using a transverse deflecting structure, the injector of the VUV-FEL at DESY, spectral decoding electro-optic measurements for longitudinal bunch diagnostics at the DESY VUV-FEL, longitudinal phase space studies at PITZ, modelling the transverse phase space and core emittance studies at PITZ, measurements of thermal emittance for cesium telluride photocathodes at PITZ, status and first results from the upgraded PITZ facility, commissioning of the SPARC movable emittance meter and its first operation at PITZ. (HSI)

  5. Development of a coherent THz radiation source based on the ultra-short electron beam and its applications

    Science.gov (United States)

    Kuroda, R.; Yasumoto, M.; Toyokawa, H.; Sei, N.; Koike, M.; Yamada, K.

    2011-05-01

    At the National Institute of Advanced Industrial Science and Technology (AIST), a coherent terahertz (THz) radiation source has been developed based on an ultra-short electron beam using an S-band compact electron linac. The designed THz pulse has a high peak power of more than 1 kW in the frequency range 0.1-2 THz. The entire system is located in one research room of about 10 m square. The linac consists of a laser photocathode rf gun (BNL type) with a Cs2Te photocathode load-lock system and two 1.5-m-long S-band accelerator tubes. The electron beam can be accelerated up to approximately 42 MeV. The electron bunch was compressed to less than 1 ps (rms) with a magnetic bunch compressor. The coherent synchrotron radiation (CSR) of the THz region was generated from the ultra-short electron bunch at the 90° bending magnet, and it was extracted from a z-cut quartz window for THz applications. In this work, the THz scanning transmission imaging was successfully demonstrated for measuring the freshness of a vegetable leaf over a period of time.

  6. Self-amplified spontaneous emission FEL with energy-chirped electron beam and its application for generation of attosecond x-ray pulses

    Directory of Open Access Journals (Sweden)

    E. L. Saldin

    2006-05-01

    Full Text Available Influence of a linear energy chirp in the electron beam on a self-amplified spontaneous emission (SASE Free Electron Laser (FEL operation is studied analytically and numerically using a 1D model. Analytical results are based on the theoretical background developed by Krinsky and Huang [Phys. Rev. ST Accel. Beams 6, 050702 (2003PRABFM1098-4402]. Explicit expressions for Green’s functions and for output power of a SASE FEL are obtained for the high-gain linear regime in the limits of small and large energy chirp parameters. Saturation length and power versus energy chirp parameter are calculated numerically. It is shown that the effect of linear energy chirp on FEL gain is equivalent to the linear undulator tapering (or linear energy variation along the undulator. A consequence of this fact is a possibility to perfectly compensate FEL gain degradation, caused by the energy chirp, by means of the undulator tapering independently of the value of the energy chirp parameter. An application of this effect for generation of attosecond pulses from a hard x-ray FEL is proposed. Strong energy modulation within a short slice of an electron bunch is produced by a few-cycle optical laser pulse in a short undulator, placed in front of the main undulator. Gain degradation within this slice is compensated by an appropriate undulator taper while the rest of the bunch suffers from this taper and does not lase. Three-dimensional simulations predict that short (200 attoseconds high-power (up to 100 GW pulses can be produced in Angstrom wavelength range with a high degree of contrast. A possibility to reduce pulse duration to sub-100 attosecond scale is discussed.

  7. Formation and stability of a hollow electron beam in the presence of a plasma wake field driven by an ultra-short electron bunch

    CERN Document Server

    Tanjia, F; De Nicola, S; Akhter, T; Jovanovic, D

    2015-01-01

    A numerical investigation on the spatiotemporal evolution of an electron beam, externally injected in a plasma in the presence of a plasma wake field, is carried out. The latter is driven by an ultra-short relativistic axially-symmetric femtosecond electron bunch. We first derive a novel Poisson-like equation for the wake potential where the driving term is the ultra-short bunch density, taking suitably into account the interplay between the sharpness and high energy of the bunch. Then, we show that a channel is formed longitudinally, through the externally injected beam while experiencing the effects of the bunch-driven plasma wake field, within the context of thermal wave model. The formation of the channel seems to be a final stage of the 3D evolution of the beam. This involves the appearance of small filaments and bubbles around the longitudinal axis. The bubbles coalesce forming a relatively stable axially-symmetric hollow beam structure.

  8. Formation and stability of a hollow electron beam in the presence of a plasma wake field driven by an ultra-short electron bunch

    Energy Technology Data Exchange (ETDEWEB)

    Tanjia, F., E-mail: tanjia.fatema@gmail.com [Dipartimento di Fisica, Universià di Napoli “Federico II” (Italy); INFN Sezione di Napoli (Italy); Fedele, R. [Dipartimento di Fisica, Universià di Napoli “Federico II” (Italy); INFN Sezione di Napoli (Italy); De Nicola, S. [Dipartimento di Fisica, Universià di Napoli “Federico II” (Italy); INFN Sezione di Napoli (Italy); CNR-SPIN, Complesso Universitario di Monte S' Angelo, Napoli (Italy); Akhter, T. [Dipartimento di Fisica, Universià di Napoli “Federico II” (Italy); INFN Sezione di Napoli (Italy); Jovanović, D. [Institute of Physics, University of Belgrade, Belgrade (Serbia)

    2016-09-01

    A numerical investigation on the spatiotemporal evolution of an electron beam, externally injected in a plasma in the presence of a plasma wake field, is carried out. The latter is driven by an ultra-short relativistic axially-symmetric femtosecond electron bunch. We first derive a novel Poisson-like equation for the wake potential where the driving term is the ultra-short bunch density, taking suitably into account the interplay between the sharpness and high energy of the bunch. Then, we show that a channel is formed longitudinally, through the externally injected beam while experiencing the effects of the bunch-driven plasma wake field, within the context of thermal wave model. The formation of the channel seems to be a final stage of the 3D evolution of the beam. This involves the appearance of small filaments and bubbles around the longitudinal axis. The bubbles coalesce forming a relatively stable axially-symmetric hollow beam structure. - Highlights: • A novel Poisson-like equation for the wake potential driven by the ultra-short bunch density is derived in the context of PWF theory. • The spatiotemporal evolution of another externally injected electron beam in the presence plasma wake field is numerically investigated. • A channel is formed longitudinally, through the externally injected beam while experiencing the effects of the bunch-driven plasma wake field. • A relatively stable axially symmetric hollow beam structure is formed through the evolution.

  9. Electron acceleration in vacuum by a linearly-polarized ultra-short tightly-focused THz pulse

    Science.gov (United States)

    Salamin, Yousef I.

    2017-09-01

    The analytic expressions for the electric and magnetic fields of an ultra-short, tightly-focused, linearly-polarized laser pulse propagating in vacuum, derived elsewhere (Salamin, 2015) [13] to lowest-order of a truncated power-series expansion from vector and scalar potentials, are employed here for single electron acceleration calculations by THz radiation. It is shown that, while currently available THz peak powers cannot accelerate electrons appreciably, yet they result in substantial energy gradients. The field equations are used to show that an electron can be accelerated, in vacuum, from rest to 4.83 MeV by interaction with a single THz pulse of 1 TW power. Similarly, a 1 GW power pulse focused to sub-wavelength waist radius at focus is shown to accelerate the electron from rest to 5.76 keV.

  10. Summary of the working group on FEL theory

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references.

  11. 17th international free electron laser conference and 2nd international FEL users` workshop. Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This workshop and conference were held together to enhance the interaction between FEL builders and users. Current topics of interest in FEL research form the basis for the oral presentations. The program for the User`s workshop was developed in a similar manner. Storage rings, linear accelerators, materials research and applications are all considered topics. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  12. Generation of low-emittance electron beams in electrostatic accelerators for FEL applications

    Science.gov (United States)

    Teng, Chen; Elias, Luis R.

    1995-02-01

    This paper reports results of transverse emittance studies and beam propagation in electrostatic accelerators for free electron laser applications. In particular, we discuss emittance growth analysis of a low current electron beam system consisting of a miniature thermoionic electron gun and a National Electrostatics Accelerator (NEC) tube. The emittance growth phenomenon is discussed in terms of thermal effects in the electron gun cathode and aberrations produced by field gradient changes occurring inside the electron gun and throughout the accelerator tube. A method of reducing aberrations using a magnetic solenoidal field is described. Analysis of electron beam emittance was done with the EGUN code. Beam propagation along the accelerator tube was studied using a cylindrically symmetric beam envelope equation that included beam self-fields and the external accelerator fields which were derived from POISSON simulations.

  13. Table-top laser-driven ultrashort electron and X-ray source: the CIBER-X source project

    Science.gov (United States)

    Girardeau-Montaut, Jean-Pierre; Kiraly, Bélà; Girardeau-Montaut, Claire; Leboutet, Hubert

    2000-09-01

    We report on the development of a new laser-driven table-top ultrashort electron and X-ray source, also called the CIBER-X source . X-ray pulses are produced by a three-step process which consists of the photoelectron emission from a thin metallic photocathode illuminated by 16 ps duration laser pulses at 213 nm. The e-gun is a standard Pierce diode electrode type, in which electrons are accelerated by a cw electric field of ˜11 MV/m up to a hole made in the anode. The photoinjector produces a train of 70-80 keV electron pulses of ˜0.5 nC and 20 A peak current at a repetition rate of 10 Hz. The electrons are then transported outside the diode along a path of 20 cm length, and are focused onto a target of thullium by magnetic fields produced by two electromagnetic coils. X-rays are then produced by the impact of electrons on the target. Simulations of geometrical, electromagnetic fields and energetic characteristics of the complete source were performed previously with the assistance of the code PIXEL1 also developed at the laboratory. Finally, experimental electron and X-ray performances of the CIBER-X source as well as its application to very low dose imagery are presented and discussed. source Compacte d' Impulsions Brèves d' Electrons et de Rayons X

  14. Design study on the merger for BXERL-FEL

    Institute of Scientific and Technical Information of China (English)

    ZHU Xiong-Wei; WANG Shu-Hong; CHEN Sen-Yu

    2009-01-01

    In North China, there is a preliminary proposal for ERL-FEL light source (BXERL-FEL) with its aim at "one machine, two purposes" (the XFEL and ERL work simultaneously). One of the key technologies is the merger section. In this paper, we give the physical design of the merger section for BXERL-FEL which merges three kinds of electron beam.

  15. High Average Power Optical FEL Amplifiers

    CERN Document Server

    Ben-Zvi, I; Litvinenko, V

    2005-01-01

    Historically, the first demonstration of the FEL was in an amplifier configuration at Stanford University. There were other notable instances of amplifying a seed laser, such as the LLNL amplifier and the BNL ATF High-Gain Harmonic Generation FEL. However, for the most part FELs are operated as oscillators or self amplified spontaneous emission devices. Yet, in wavelength regimes where a conventional laser seed can be used, the FEL can be used as an amplifier. One promising application is for very high average power generation, for instance a 100 kW average power FEL. The high electron beam power, high brightness and high efficiency that can be achieved with photoinjectors and superconducting energy recovery linacs combine well with the high-gain FEL amplifier to produce unprecedented average power FELs with some advantages. In addition to the general features of the high average power FEL amplifier, we will look at a 100 kW class FEL amplifier is being designed to operate on the 0.5 ampere Energy Recovery Li...

  16. Investigation of a 2-Colour Undulator FEL Using Puffin

    CERN Document Server

    Campbell, L T; Reiche, S

    2013-01-01

    Initial studies of a 2-colour FEL amplifier using one monoenergetic electron beam are presented. The interaction is modelled using the unaveraged, broadband FEL code Puffin. A series of undulator modules are tuned to generate two resonant frequencies along the FEL interaction and a self-consistent 2-colour FEL interaction at widely spaced non-harmonic wavelengths at 1nm and 2.4nm is demonstrated.

  17. Femtosecond timing-jitter between photo-cathode laser and ultra-short electron bunches by means of hybrid compression

    Science.gov (United States)

    Pompili, R.; Anania, M. P.; Bellaveglia, M.; Biagioni, A.; Castorina, G.; Chiadroni, E.; Cianchi, A.; Croia, M.; Di Giovenale, D.; Ferrario, M.; Filippi, F.; Gallo, A.; Gatti, G.; Giorgianni, F.; Giribono, A.; Li, W.; Lupi, S.; Mostacci, A.; Petrarca, M.; Piersanti, L.; Di Pirro, G.; Romeo, S.; Scifo, J.; Shpakov, V.; Vaccarezza, C.; Villa, F.

    2016-08-01

    The generation of ultra-short electron bunches with ultra-low timing-jitter relative to the photo-cathode (PC) laser has been experimentally proved for the first time at the SPARC_LAB test-facility (INFN-LNF, Frascati) exploiting a two-stage hybrid compression scheme. The first stage employs RF-based compression (velocity-bunching), which shortens the bunch and imprints an energy chirp on it. The second stage is performed in a non-isochronous dogleg line, where the compression is completed resulting in a final bunch duration below 90 fs (rms). At the same time, the beam arrival timing-jitter with respect to the PC laser has been measured to be lower than 20 fs (rms). The reported results have been validated with numerical simulations.

  18. Femtosecond timing-jitter between photo-cathode laser and ultra-short electron bunches by means of hybrid compression

    CERN Document Server

    Pompili, Riccardo; Bellaveglia, M; Biagioni, A; Castorina, G; Chiadroni, E; Cianchi, A; Croia, M; Di Giovenale, D; Ferrario, M; Filippi, F; Gallo, A; Gatti, G; Giorgianni, F; Giribono, A; Li, W; Lupi, S; Mostacci, A; Petrarca, M; Piersanti, L; Di Pirro, G; Romeo, S; Scifo, J; Shpakov, V; Vaccarezza, C; Villa, F

    2017-01-01

    The generation of ultra-short electron bunches with ultra-low timing-jitter relative to the photo-cathode (PC) laser has been experimentally proved for the first time at the SPARC_LAB test-facility (INFN-LNF, Frascati) exploiting a two-stage hybrid compression scheme. The first stage employs RF-based compression (velocity-bunching), which shortens the bunch and imprints an energy chirp on it. The second stage is performed in a non-isochronous dogleg line, where the compression is completed resulting in a final bunch duration below 90 fs (rms). At the same time, the beam arrival timing-jitter with respect to the PC laser has been measured to be lower than 20 fs (rms). The reported results have been validated with numerical simulations.

  19. Experimental Studies of Temporal Electron Beam Shaping at the DUV-FEL Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Loos, H.; Doweel, D.; /SLAC; Sheehy, B.; Shen, Y.; Tsang, T.; Wang, X.; /Brookhaven; Serafini, L.; /INFN, Milan; Boscolo, M.; Ferrario, M.; Petrarca, M.; Vicario, C.; /Frascati

    2005-09-28

    The photoinjectors for future short wavelength high brightness accelerator driven light sources need to produce an electron beam with ultra-low emittance. At the DUVFEL facility at BNL, we studied the effect of longitudinally shaping the photocathode laser pulses on the electron beam dynamics. We report on measurements of the longitudinal phase space distributions and the time-resolved transverse beam parameters for both a Gaussian and a flat-top temporal laser pulse profile.

  20. FEL simulations for the LCLS

    CERN Document Server

    Nuhn, H D

    1999-01-01

    A first design study report has recently been completed (The LCLS Design Study Group, LCLS Design Study Report, April 1998, SLAC-R-521) for the linac coherent light source (LCLS), a proposal to build an X-ray free electron laser (FEL) at the Stanford Linear Accelerator Center (SLAC) as a single pass self-amplified spontaneous emission (SASE) amplifier. The proposal includes the use of a very low emittance electron beam accelerated up to 15 GeV by the last third of the SLAC linac to produce sub-picosecond X-ray pulses with high brightness and full transverse coherence in a 112-m long undulator. Many aspects of the FEL design have been analyzed with FEL simulation codes. The paper discusses some of the results of these aspects, i.e. temporal X-ray pulse structure and power spectrum, trajectory errors and effects of undulator beam tube wakefields.

  1. Single-shot spectro-temporal characterization of XUV pulses from a seeded free-electron laser.

    Science.gov (United States)

    De Ninno, Giovanni; Gauthier, David; Mahieu, Benoît; Ribič, Primož Rebernik; Allaria, Enrico; Cinquegrana, Paolo; Danailov, Miltcho Bojanov; Demidovich, Alexander; Ferrari, Eugenio; Giannessi, Luca; Penco, Giuseppe; Sigalotti, Paolo; Stupar, Matija

    2015-08-20

    Intense ultrashort X-ray pulses produced by modern free-electron lasers (FELs) allow one to probe biological systems, inorganic materials and molecular reaction dynamics with nanoscale spatial and femtoscale temporal resolution. These experiments require the knowledge, and possibly the control, of the spectro-temporal content of individual pulses. FELs relying on seeding have the potential to produce spatially and temporally fully coherent pulses. Here we propose and implement an interferometric method, which allows us to carry out the first complete single-shot spectro-temporal characterization of the pulses, generated by an FEL in the extreme ultraviolet spectral range. Moreover, we provide the first direct evidence of the temporal coherence of a seeded FEL working in the extreme ultraviolet spectral range and show the way to control the light generation process to produce Fourier-limited pulses. Experiments are carried out at the FERMI FEL in Trieste.

  2. Radiation control aspects of the civil construction for a high power free electron laser (FEL) facility

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, T.; Neil, G.; Stapleton, G.

    1996-12-31

    The paper discusses some of the assumptions and methods employed for the control of ionizing radiation in the specifications for the civil construction of a planned free electron laser facility based on a 200 MeV, 5 mA superconducting recirculation electron accelerator. Consideration is given firstly to the way in which the underlying building configuration and siting aspects were optimized on the basis of the early assumptions of beam loss and radiation goals. The various design requirements for radiation protection are then considered, and how they were folded into an aesthetically pleasing and functional building.

  3. FEL system for gamma-gamma collider at TESLA

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2001-01-01

    The present paper contains the results of optimization of the free electron laser for the gamma-gamma collider at TESLA. A superconducting linear accelerator, similar to the TTF (TESLA Test Facility) accelerator, produces a driving electron beam for the FEL. The MOPA FEL scheme is studied when the radiation from a master oscillator is amplified in the FEL amplifier with tapered undulator. The FEL produces a radiation of TW level with a wavelength of 1 mu m. Optimization of the FEL amplifier is performed with a three-dimensional, time-dependent simulation code FAST.

  4. Towards diffractive imaging with single pulses of FEL radiation. Dynamics within irradiatied samples and their influence on the analysis of imaging data

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Fenglin

    2010-08-15

    3D single particle coherent diffraction imaging (CDI) of bioparticles (such as proteins, macromolecules and viruses) is one of the main possible applications of the new generation of light sources: free-electron lasers (FELs), which are now available at FLASH (Hamburg, Germany) and LCLS (Stanford, U.S.A.). The extremely bright and ultrashort FEL pulses potentially enable CDI to achieve high resolution down to subnanometer length scale. However, intense FEL pulses cause serious radiation damage in bioparticles, even during single shots, which may set the resolution limits for CDI with FELs. Currently, since the signal-to-noise ratio is very low for small biological particles, direct experimental study of radiation damage in the single particle imaging is fairly difficult. Single atomic (noble gas) clusters become good objects to reveal effects of radiation damage processes on CDI with FEL radiation. This thesis studies three aspects of the radiation damage problem, which are treated in three independent chapters: (1) Molecular Dynamics simulations to quantitively describe radiation damage processes within irradiated atomic clusters during single pulses; (2) reconstruction analysis of single-shot CDI diffraction patterns of atomic clusters, which may potentially help to understand the radiation damage occurring in biological samples; and (3) testing the effects of coating water layers in CDI, which is supposed to minimize the radiation damage in irradiated bioparticles. (orig.)

  5. Investigations on the electron bunch distribution in the longitudinal phase space at a laser driven RF electron source for the European X-FEL

    Energy Technology Data Exchange (ETDEWEB)

    Roensch, Juliane

    2010-01-15

    The Photoinjector Test facility at DESY, Zeuthen site, (PITZ) is aiming for the optimization of electron guns for SAS-FELs. For this it is necessary to investigate the characteristics of the six dimensional phase space of the bunch produced by a photoinjector. This thesis is focused on the analysis of the longitudinal properties of the electron bunch distribution, this means the temporal current distribution and the momentum distribution as well as the correlation of both properties. The complete distribution of the electron bunch in longitudinal phase space of a photoinjector was measured directly for the first time at a beam momentum of about 5 MeV/c, using an existing apparatus. This system had been designed for an accelerating gradient of 40 MV/m. Its subcomponents were analysed to understand sources of uncertainties of the measurement system. The usage of higher accelerating gradients in the gun (60 MV/m, resulting in a beam momentum of about 6.8 MeV/c) demands major modifications of the existing measurement system for the longitudinal phase space distribution. An upgrade of the facility by an additional accelerating cavity required the design of further longitudinal diagnostics systems for the analysis at higher momenta (up to 40 MeV/c). Measurements of the longitudinal beam properties to determine the influence of different operation parameters, like RF launch phase, charge, accelerating field gradient and laser distribution were performed and compared to simulations. (orig.)

  6. Effect of gas heating on the generation of an ultrashort avalanche electron beam in the pulse-periodic regime

    Science.gov (United States)

    Baksht, E. Kh.; Burachenko, A. G.; Lomaev, M. I.; Sorokin, D. A.; Tarasenko, V. F.

    2015-07-01

    The generation of an ultrashort avalanche electron beam (UAEB) in nitrogen in the pulse-periodic regime is investigated. The gas temperature in the discharge gap of the atmospheric-pressure nitrogen is measured from the intensity distribution of unresolved rotational transitions ( C 3Π u , v' = 0) → ( B 3Π g , v″ = 0) in the nitrogen molecule for an excitation pulse repetition rate of 2 kHz. It is shown that an increase in the UAEB current amplitude in the pulse-periodic regime is due to gas heating by a series of previous pulses, which leads to an increase in the reduced electric field strength as a result of a decrease in the gas density in the zone of the discharge formation. It is found that in the pulse-periodic regime and the formation of the diffuse discharge, the number of electrons in the beam increases by several times for a nitrogen pressure of 9 × 103 Pa. The dependences of the number of electrons in the UAEB on the time of operation of the generator are considered.

  7. Violation of the transit-time limit toward generation of ultrashort electron bunches with controlled velocity chirp

    Science.gov (United States)

    Jeon, Seok-Gy; Shin, Dongwon; Hur, Min Sup

    2016-09-01

    Various methods to generate ultrashort electron bunches for the ultrafast science evolved from the simple configuration of two-plate vacuum diodes to advanced technologies such as nanotips or photocathodes excited by femtosecond lasers. In a diode either in vacuum or of solid-state, the transit-time limit originating from finite electron mobility has caused spatiotemporal bunch-collapse in ultrafast regime. Here, we show for the first time that abrupt exclusion of transit-phase is a more fundamental origin of the bunch-collapse than the transit-time limit. We found that by significantly extending the cathode-anode gap distance, thereby violating the transit-time limit, the conventional transit-time-related upper frequency barrier in diodes can be removed. Furthermore, we reveal how to control the velocity chirp of bunches leading to ballistic bunch-compression. Demonstration of 0.707 THz-, 46.4 femtosecond-bunches from a 50 μm-wide diode in three-dimensional particle-in-cell simulations shows a way toward simple and compact sources of ultrafast electron bunches for diverse ultrafast sciences.

  8. Enhancing FEL Power with Phase Shifters

    Energy Technology Data Exchange (ETDEWEB)

    Ratner, Daniel; /Stanford U.; Chao, Alex; Huang, Zhirong; /SLAC

    2010-07-30

    Tapering the undulator parameter is a well-known method for maintaining the resonant condition past saturation, and increasing Free Electron Laser (FEL) efficiency. In this paper, we demonstrate that shifting the electron bunch phase relative to the radiation is equivalent to tapering the undulator parameter. Using discrete phase changes derived from optimized undulator tapers for the Linac Coherent Light Source (LCLS) x-ray FEL, we show that appropriate phase shifts between undulator sections can reproduce the power enhancement of undulator tapers. Phase shifters are relatively easy to implement and operate, and could be used to aid or replace undulator tapers in optimizing FEL performance.

  9. Primary experimental studies on mid-infrared FEL irradiation on dental substances at BFEL

    CERN Document Server

    Biao, Z J; Gao Xue Ju; He Wei; Huang Yu Ying; Li Yong Gui; LiuNianQing; Wang Min Kai; Wu Gan; Yan Xue Pin; Zhang Guo Qing

    2001-01-01

    A free electron laser (FEL) with its characteristics of wide wavelength tunability, ultrashort pulse time structure, and high peak power density is predominantly superior to all other conventional lasers in applications. Several experimental studies on mid-infrared FEL irradiation on dental enamel and dentine were performed at the Beijing FEL. Experimental aims were to investigate changes in the hardness, ratios of P to Ca and Cs before and after irradiation on samples with a characteristic absorption wavelength of 9.66 mu m, in the colors of these sample surfaces after irradiation with different wavelengths around the peak wavelength. The time dependence of temperature of the dentine sample was measured with its ps pulse effects compared to that with a continuous CO sub 2 laser. FTIR absorption spectra in the range of 2.5-15.4 mu m for samples of these hard dental substances and pure hydroxyapatite were first examined to decide their chemical components and absorption maximums. Primary experimental results w...

  10. A Cherenkov radiator for FEL-synchronized VUV-pulses at a linac-based FEL

    NARCIS (Netherlands)

    Goloviznin, V. V.; Oepts, D.; van der Wiel, M. J.

    1997-01-01

    A possible way to carry out two-color IR+VUV pump-probe experiments at linac-based FELs is proposed. The idea is to supply an FEL facility with a gas cell filled with helium or hydrogen, so that the electron beam, upon passage through the undulator, could be used to generate ultraviolet Cherenkov

  11. Pondermotive acceleration of electrons to GeV energies by a tightly focused ultra-short ultra-intense laser pulse

    Science.gov (United States)

    Tian, Youwei; Yu, Wei; Lu, Peixiang; He, Feng; Xu, Han

    2005-12-01

    Laser-driven pondermotive acceleration of electrons in vacuum has been considered using computer simulations. It is demonstrated that a low-energy free electron can be violently accelerated to final kinetic energy of GeV by a tightly focused ultra-short ultra-intense laser pulse. Suitable conditions that are crucial for this phenomenon to occur have been investigated. It is shown that selection of appropriate initial conditions like relative time delay between electron and the laser pulse, electron's incident angle and momentum, laser pulse duration and its focal spot size play important roles in the efficient acceleration scheme.

  12. An electrohydrodynamics model for non-equilibrium electron and phonon transport in metal films after ultra-short pulse laser heating

    Science.gov (United States)

    Zhou, Jun; Li, Nianbei; Yang, Ronggui

    2015-06-01

    The electrons and phonons in metal films after ultra-short pulse laser heating are in highly non-equilibrium states not only between the electrons and the phonons but also within the electrons. An electrohydrodynamics model consisting of the balance equations of electron density, energy density of electrons, and energy density of phonons is derived from the coupled non-equilibrium electron and phonon Boltzmann transport equations to study the nonlinear thermal transport by considering the electron density fluctuation and the transient electric current in metal films, after ultra-short pulse laser heating. The temperature evolution is calculated by the coupled electron and phonon Boltzmann transport equations, the electrohydrodynamics model derived in this work, and the two-temperature model. Different laser pulse durations, film thicknesses, and laser fluences are considered. We find that the two-temperature model overestimates the electron temperature at the front surface of the film and underestimates the damage threshold when the nonlinear thermal transport of electrons is important. The electrohydrodynamics model proposed in this work could be a more accurate prediction tool to study the non-equilibrium electron and phonon transport process than the two-temperature model and it is much easier to be solved than the Boltzmann transport equations.

  13. Design Features of a Planar Hybrid/Permanent Magnet Strong Focusing Undulator for Free Electron Laser (FEL) And Synchrotron Radiation (SR) Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tatchyn, Roman; /SLAC

    2011-09-09

    Insertion devices for Angstrom-wavelength Free Electron Laser (FEL) amplifiers driven by multi-GeV electron beams generally require distributed focusing substantially stronger than their own natural focusing fields. Over the last several years a wide variety of focusing schemes and configurations have been proposed for undulators of this class, ranging from conventional current-driven quadrupoles external to the undulator magnets to permanent magnet (PM) lattices inserted into the insertion device gap. In this paper we present design studies of a flexible high-field hybrid/PM undulator with strong superimposed planar PM focusing proposed for a 1.5 Angstrom Linac Coherent Light Source (LCLS) driven by an electron beam with a 1 mm-mr normalized emittance. Attainable field parameters, tuning modes, and potential applications of the proposed structure are discussed.

  14. Measurement of Hot Electron Spectrum During the Interaction of Ultrashort Pulse UV Laser With Solid Target

    Institute of Scientific and Technical Information of China (English)

    LIYe-jun; SHANYu-sheng; ZHANGJi; ZHANGHai-feng; TANGXiu-zhang; WANGLei-jian

    2003-01-01

    The hot electron spectrum was measured using electron magnetic spectrometer through the irradiation of solid Cu target by an intense, UV (248 nm) femtosecond (440 fs) laser pulse with free pre-pulse, and the intensity of laser is 1017 W/cm2. We find the electron spectrum presents two temperatures Maxwellian distribution.

  15. ElectroOptical measurements of ultrashort 45 MeV electron beam bunch

    CERN Document Server

    Nikas, D; Kowalski, L A; Larsen, R; Lazarus, D M; Ozben, C; Semertzidis, Y K; Tsang, Thomas; Srinivasan-Rao, T

    2001-01-01

    We have made an observation of 45 MeV electron beam bunches using the nondestructive electro-optical (EO) technique. The amplitude of the EO modulation was found to increase linearly with electron beam charge and decrease inversely with the optical beam path distance from the electron beam. The risetime of the signal was bandwidth limited by our detection system to \\~70ps. An EO signal due to ionization caused by the electrons traversing the EO crystal was also observed. The EO technique may be ideal for the measurement of bunch structure with femtosecond resolution of relativistic charged particle beam bunches.

  16. Electro-optical Measurements of Ultrashort 45 MeV Electron Beam Bunches

    CERN Document Server

    Tsang, Thomas; Kowalski, L A; Larsen, R; Lazarus, D M; Nikas, D; Ozben, C; Semertzidis, Y K; Srinivasan-Rao, T

    2000-01-01

    We have measured the temporal duration of 45 MeV picosecond electron beam bunches using a noninvasive electro-optical (EO) technique. The amplitude of the EO modulation was found to increase linearly with electron beam charge and decrease inversely with distance from the electron beam. The risetime of the temporal signal was limited by our detection system to ~70ps. The EO signal due to ionization caused by the electrons traversing the EO crystal was also observed. It has a distinctively long decay time constant and signal polarity opposite to that due to the field induced by the electron beam. The electro-optical technique may be ideal for the measurement of bunch length of femtosecond, relativistic, high energy, charged, particle beams.

  17. Optical tailoring of xFEL beams

    Energy Technology Data Exchange (ETDEWEB)

    West, Gavin [SLAC National Accelerator Lab., Menlo Park, CA (United States); Coffee, R. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-08-20

    There is an inherent exibility unique to free electron lasers (FELs) that lends well to experimental approaches normally too difficult for other light sources to accomplish. This includes the ability to optically shape the electron bunch prior to final its acceleration for the final FEL process. Optical pulse shaping of the electron bunch can enable both femtosecond and attosecond level FEL pulse control. Pulse shaping is currently implemented, not optically but mechanically, in LCLS-I with an adjustable foil slit that physically spoils the momentum phase of the electron bunch. This selectively suppresses the downstream FEL process ofspoiled electrons. Such a mechanical spoiling method fails for both the soft x-ray regime as well as the high repetition rates that are planned in LCLS-II. Our proposed optical spoiling method circumvents this limitation by making use of the existing ultrafast laser beam that is typically used for adjusting the energy spread for the initial electron bunch. Using Fourier domain shaping we can nearly arbitrarily shape the laser pulses to affect the electron bunch. This can selectively spoil electrons within each bunch. Here we demonstrate the viability of this approach with a programmable acousto-optic dispersive filter. This method is not only well suited for LCLS-II but also has several advantages over mechanical spoiling, including lack of radiation concerns, experiment specific FEL pulse shapes, and real-time adjustment for applications that require high duty-cycle variation such as lock-in amplification of small signals.

  18. Emerging opportunities in structural biology with X-ray free-electron lasers

    Science.gov (United States)

    Schlichting, Ilme; Miao, Jianwei

    2012-01-01

    X-ray free-electron lasers (X-FELs) produce X-ray pulses with extremely brilliant peak intensity and ultrashort pulse duration. It has been proposed that radiation damage can be “outrun” by using an ultra intense and short X-FEL pulse that passes a biological sample before the onset of significant radiation damage. The concept of “diffraction-before-destruction” has been demonstrated recently at the Linac Coherent Light Source, the first operational hard X-ray FEL, for protein nanocrystals and giant virus particles. The continuous diffraction patterns from single particles allow solving the classical “phase problem” by the oversampling method with iterative algorithms. If enough data are collected from many identical copies of a (biological) particle, its three-dimensional structure can be reconstructed. We review the current status and future prospects of serial femtosecond crystallography (SFX) and single-particle coherent diffraction imaging (CDI) with X-FELs. PMID:22922042

  19. Effect of intense, ultrashort laser pulses on DNA plasmids in their native state: strand breakages induced by {\\it in-situ} electrons and radicals

    CERN Document Server

    D'Souza, J S; Dharmadhikari, A K; Rao, B J; Mathur, D

    2011-01-01

    Single strand breaks are induced in DNA plasmids, pBR322 and pUC19, in aqueous media exposed to strong fields generated using ultrashort laser pulses (820 nm wavelength, 45 fs pulse duration, 1 kHz repetition rate) at intensities of 1-12 TW cm$^{-2}$. The strong fields generate, {\\it in situ}, electrons and radicals that induce transformation of supercoiled DNA into relaxed DNA, the extent of which is quantified. Introduction of electron and radical scavengers inhibits DNA damage; results indicate that OH radicals are the primary (but not sole) cause of DNA damage.

  20. Sub-lambda gratings, surface plasmons, hotter electrons and brighter x-ray sources- enhanced absorption of intense, ultrashort laser light by tiny surface modulations

    CERN Document Server

    Kahaly, S; Kahaly, Subhendu

    2007-01-01

    We observe near 100 % absorption of light in intense ultrashort laser plasma interaction in a metal coated (Au on glass) sub-lambda grating structure under suitable conditions and the subsequent 'hot' electron generation from the grating plasma. In the low intensity regime we determine the conditions in which a monochromatic infrared light (lambda = 800nm corresponding to the central wavelength of the ultrashort laser that we used in subsequent experiments) efficiently excites surface plasmon in the grating. Then we study how the surface plasmon resonance condition changes when we excite them using low intensity ultrashort pulses. We look at the reflectivity of light varying the incident light intensity over a wide range (2x10e12Wcm-2-2x10e15Wcm-2). The reflectivity of grating with the resonance condition satisfied is the lowest over the whole range of intensity. We compare the data with those obtained from highly polished (lambda/5) Au mirror target under identical conditions. At high intensities we look at ...

  1. A feasibility study of TAC IR-FEL project

    Energy Technology Data Exchange (ETDEWEB)

    Aksakal, Huesnue, E-mail: aksakal@cern.c [Nigde University, Department of Physics, Faculty of Letter and Science, 51240 Nigde (Turkey); Arikan, Ertan [Nigde University, Department of Physics, Faculty of Letter and Science, 51240 Nigde (Turkey)

    2010-08-21

    We have performed preliminary simulation of amplifier mode operation of Turkish accelerator complex (TAC) infrared free electron laser (IR-FEL) facility which is designed to operate in oscillator mode. FEL power values of amplifier mode are explored using 3D SIMPLEX 1.3 (X-ray FEL Practical Simulator) simulation code and it is argued that the same or higher amount of power of TAC IR-FEL planing to obtain in the oscillator mode, could be obtained in the amplifier mode, using same undulator and electron beam parameters with a small modification.

  2. 2D Optical Streaking for Ultra-Short Electron Beam Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y.T.; Huang, Z.; Wang, L.; /SLAC

    2011-12-14

    We propose a novel approach to measure short electron bunch profiles at micrometer level. Low energy electrons generated during beam-gas ionization are simultaneously modulated by the transverse electric field of a circularly-polarized laser, and then they are collected at a downstream screen where the angular modulation is converted to a circular shape. The longitudinal bunch profile is simply represented by the angular distribution of the electrons on the screen. We only need to know the laser wavelength for calibration and there is no phase synchronization problem. Meanwhile the required laser power is also relatively low in this setup. Some simulations examples and experimental consideration of this method are discussed. At Linac Coherent Light Source (LCLS), an S-band RF transverse deflector (TCAV) is used to measure the bunch length with a resolution 10 femtosecond (fs) rms. An X-band deflector (wavelength 2.6cm) is proposed recently to improve the resolution. However, at the low charge operation mode (20pC), the pulse length can be as short as fs. It is very challenging to measure femtosecond and sub-femtosecond level bunch length. One of the methods is switching from RF to {mu}m level wavelength laser to deflect the bunch. A powerful laser ({approx}10s GW) is required to deflect such a high energy beam (GeV) in a wiggler. Synchronization is another difficulty: the jitter between the bunch and the laser can be larger than the laser wavelength, which makes single-shot measurement impossible. To reduce the laser power, we propose to use ionized electrons from high energy electron beam and gas interaction for high energy electron bunch diagnostics. Similarly, the femtosecond X-ray streak camera uses X-ray ionization electrons to measure the X-ray pulse. The electrons generated by beam-gas ionization have low energy (eVs). Therefore, a lower laser power is possible to deflect such low energy electrons. Note that there is no field ionization in our case. To avoid

  3. Giant electron-hole transport asymmetry in ultra-short quantum transistors

    Science.gov (United States)

    McRae, A. C.; Tayari, V.; Porter, J. M.; Champagne, A. R.

    2017-05-01

    Making use of bipolar transport in single-wall carbon nanotube quantum transistors would permit a single device to operate as both a quantum dot and a ballistic conductor or as two quantum dots with different charging energies. Here we report ultra-clean 10 to 100 nm scale suspended nanotube transistors with a large electron-hole transport asymmetry. The devices consist of naked nanotube channels contacted with sections of tube under annealed gold. The annealed gold acts as an n-doping top gate, allowing coherent quantum transport, and can create nanometre-sharp barriers. These tunnel barriers define a single quantum dot whose charging energies to add an electron or a hole are vastly different (e-h charging energy asymmetry). We parameterize the e-h transport asymmetry by the ratio of the hole and electron charging energies ηe-h. This asymmetry is maximized for short channels and small band gap tubes. In a small band gap device, we demonstrate the fabrication of a dual functionality quantum device acting as a quantum dot for holes and a much longer quantum bus for electrons. In a 14 nm-long channel, ηe-h reaches up to 2.6 for a device with a band gap of 270 meV. The charging energies in this device exceed 100 meV.

  4. Observation of superradiance in a short-pulse FEL oscillator

    NARCIS (Netherlands)

    Jaroszynski, D. A.; Chaix, P.; Piovella, N.; Oepts, D.; Knippels, G.M.H.; van der Meer, A. F. G.; Weits, H. H.

    1997-01-01

    Superradiance has been experimentally studied, in a short-pulse free-electron laser (FEL) oscillator. Superradiance is the optimal way of extracting optical radiation from an FEL and can be characterised by the following scale laws: peak optical power P, scales as the square of electron charge, Q, (

  5. Measurements and simulations of ultralow emittance and ultrashort electron beams in the linac coherent light source.

    Science.gov (United States)

    Ding, Y; Brachmann, A; Decker, F-J; Dowell, D; Emma, P; Frisch, J; Gilevich, S; Hays, G; Hering, Ph; Huang, Z; Iverson, R; Loos, H; Miahnahri, A; Nuhn, H-D; Ratner, D; Turner, J; Welch, J; White, W; Wu, J

    2009-06-26

    The Linac Coherent Light Source (LCLS) is an x-ray free-electron laser project presently in a commissioning phase at the SLAC National Accelerator Laboratory. We report here on very low-emittance measurements made at low bunch charge, and a few femtosecond bunch length produced by the LCLS bunch compressors. Start-to-end simulations associated with these beam parameters show the possibilities of generating hundreds of GW at 1.5 A x-ray wavelength and nearly a single longitudinally coherent spike at 1.5 nm with 2-fs duration.

  6. Steady State Analysis of Short-wavelength, High-gainFELs in a Large Storage Ring

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Z.; Bane, K.; Cai, Y.; Chao, A.; Hettel, R.; /SLAC; Pellegrini, C.; /UCLA

    2007-10-15

    Storage ring FELs have operated successfully in the low-gain regime using optical cavities. Discussions of a high-gain FEL in a storage ring typically involve a special bypass to decouple the FEL interaction from the storage ring dynamics. In this paper, we investigate the coupled dynamics of a high-gain FEL in a large storage ring such as PEP and analyze the equilibrium solution. We show that an FEL in the EUV and soft x-ray regimes can be integrated into a very bright storage ring and potentially provides three orders of magnitude improvement in the average brightness at these radiation wavelengths. We also discuss possibilities of seeding with HHG sources to obtain ultra-short, high-peak power EUV and soft x-ray pulses.

  7. Electron Acceleration and the Propagation of Ultrashort High-Intensity Laser Pulses in Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiaofang; Krishnan, Mohan; Saleh, Ned; Wang, Haiwen; Umstadter, Donald

    2000-06-05

    Reported are interactions of high-intensity laser pulses ({lambda}=810 nm and I{<=}3x10{sup 18} W /cm{sup 2} ) with plasmas in a new parameter regime, in which the pulse duration ({tau}=29 fs ) corresponds to 0.6-2.6 plasma periods. Relativistic filamentation is observed to cause laser-beam breakup and scattering of the beam out of the vacuum propagation angle. A beam of megaelectronvolt electrons with divergence angle as small as 1 degree sign is generated in the forward direction, which is correlated to the growth of the relativistic filamentation. Raman scattering, however, is found to be much less than previous long-pulse results. (c) 2000 The American Physical Society.

  8. Time-resolved Chemical Imaging of Molecules by High-order Harmonics and Ultrashort Rescattering Electrons

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Chii Dong [Kansas State Univ., Manhattan, KS (United States)

    2016-03-21

    Directly monitoring atomic motion during a molecular transformation with atomic-scale spatio-temporal resolution is a frontier of ultrafast optical science and physical chemistry. Here we provide the foundation for a new imaging method, fixed-angle broadband laser-induced electron scattering, based on structural retrieval by direct one-dimensional Fourier transform of a photoelectron energy distribution observed along the polarization direction of an intense ultrafast light pulse. The approach exploits the scattering of a broadband wave packet created by strong-field tunnel ionization to self-interrogate the molecular structure with picometre spatial resolution and bond specificity. With its inherent femtosecond resolution, combining our technique with molecular alignment can, in principle, provide the basis for time-resolved tomography for multi-dimensional transient structural determination.

  9. Duke storage rink UV/VUV FEL: Status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Burnham, B.; Madey, J.M.J. [Duke Univ., Durham, NC (United States)] [and others

    1995-12-31

    The 1 GeV Duke storage ring was successfully commissioned with parameters exceeding initial specification. The OK-4 FEL has arrived at the Duke FEL laboratory from the Novosibirsk Institute of Nuclear Physics. The OK-4 installation and commissioning is in progress. In this paper we describe the up-to-date status of the Duke storage ring and the OK-4 FEL. The projected performance of the OK-4 UV/VUV FEL is presented based on the electron beam parameters achieved. Initial plans to operate the OK-4 UV/VUV FEL at the Duke 1 GeV storage ring are outlined. Future plans and prospects of both the OK-4 FEL and the Duke storage ring are discussed.

  10. Performance of the OK-4/Duke storage ring FEL

    CERN Document Server

    Litvinenko, V N; Pinayev, I V; Wu, Y

    2001-01-01

    In this paper, we report measured parameters of the OK-4 FEL driven by the Duke storage ring. The OK-4 FEL was being operated continuously for 2 yr in the broad wavelength range for user applications utilising spontaneous and coherent XUV and UV radiation as well as Compton back-scattered gamma-rays in the range of 2-58 MeV. During this time, the OK-4 FEL lased in the range from 193.7 to about 730 nm using five sets of mirrors and electron beam energies from 240 to 800 MeV. Our predictions for the OK-4 FEL are compared with measured performance, both in the CW and in the giant pulse mode. We discuss our future plans for the OK-4 FEL operation as well as the construction and commissioning of the OK-5 FEL with helical wigglers.

  11. Generation of "gigantic" ultra-short microwave pulses based on passive mode-locking effect in electron oscillators with saturable absorber in the feedback loop

    Science.gov (United States)

    Ginzburg, N. S.; Denisov, G. G.; Vilkov, M. N.; Zotova, I. V.; Sergeev, A. S.

    2016-05-01

    A periodic train of powerful ultrashort microwave pulses can be generated in electron oscillators with a non-linear saturable absorber installed in the feedback loop. This method of pulse formation resembles the passive mode-locking widely used in laser physics. Nevertheless, there is a specific feature in the mechanism of pulse amplification when consecutive energy extraction from different fractions of a stationary electron beam takes place due to pulse slippage over the beam caused by the difference between the wave group velocity and the electron axial velocity. As a result, the peak power of generated "gigantic" pulses can exceed not only the level of steady-state generation but also, in the optimal case, the power of the driving electron beam.

  12. Transverse-coherence properties of the FEL at the LCLS

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Yuantao; Huang, Zhirong; /SLAC; Ocko, Samuel A.; /MIT, Cambridge, Dept. Phys.

    2010-09-02

    The recently commissioned Linac Coherent Light Source is an x-ray free-electron laser at the SLAC National Accelerator Laboratory, which is now operating at x-ray wavelengths of 20-1.2 Angstrom with peak brightness nearly ten orders of magnitude beyond conventional synchrotron sources. Understanding of coherence properties of the radiation from SASE FELs at LCLS is of great practical importance for some user experiments. We present the numerical analysis of the coherence properties at different wavelengths based on a fast algorithmusing ideal and start-end simulated FEL fields. The sucessful commissioning and operation of the linac coherent light source (LCLS) [1] has demonstrated that the x-ray free-electron laser (FEL) has come of age; these types of x-ray sources are poised to revolutionize the ultra-fast x-ray sciences. The LCLS and other hard x-ray FELs under construction are based on the principle of self-amplified spontaneous emission (SASE) [2, 3], where the amplification process starts from the shot noise in the electron beam. A large number of transverse radiation modes are also excited when the electron beam enters the undulator. The FEL collective instability in the electron beam causes the modulation of the electron density to increase exponentially, and after sufficient undulator distances, a single transverse mode starts to dominate. As a result, SASE FEL is almost fully coherent in the transverse dimension. Understanding of transverse coherence properties of the radiation from SASE FELs is of great practical importance. The longitudinal coherence properties of SASE FELs have been studied before [4]. Some studies on the transverse coherence can be found in previous papers, for example, in ref. [5, 6, 7, 8, 9]. In this paper, we first discuss a new numerical algorithm based on Markov chain Monte Carlo techniques to calculate the FEL transverse coherence. Then we focus on the numerical analysis of the LCLS FEL transverse coherence.

  13. Low Emittance X-FEL Development

    CERN Document Server

    Li, K S B; Anghel, A; Bakker, R J; Böge, M; Candel, A E; Dehler, M; Ganter, R; Gough, C; Ingold, G; Leemann, S C; Pedrozzi, M; Raguin, J Y; Rivkin, L; Schlott, V; Streun, A; Wrulich, A F

    2005-01-01

    The Paul Scherrer Institute (PSI) in Switzerland currently develops a Low-Emittance electron-Gun (LEG) based on field-emitter technology [1]. The target is a normalized transverse emittance of 5 10(-8) m rad or less. Such a source is particularly interesting for FELs that target wavelengths below 0.3 nm since it permits a reduction of the required beam-energy and hence, a reduction of the construction- and operational costs of X-ray FELs. That is, for the case that this initial low emittance can be maintained throughout the accelerator. Here we present a concept for a 0.1 nm X-FEL based on LEG, which can be located close to the Swiss Light Source (SLS). Special attention goes to the maintenance of the emittance during the process of acceleration and bunch-compression, in particular in the regimes where either space-charge forces or coherent-synchrotron radiation are of importance.

  14. Spontaneous emission effects in optically pumped x-ray FEL

    Energy Technology Data Exchange (ETDEWEB)

    Smetanin, I.V.; Grigor`ev, S.V. [P.N. Lebedev Physics Institute, Moscow (Russian Federation)

    1995-12-31

    An effect of spontaneous emission in both quantum and classical regimes of the optically pumped X-ray free electron laser (FEL) in investigated. The quantum properties of an FEL are determined by the ratio of the separation {h_bar} between the absorption and emission lines (i.e. the quanta emitted) and their effective width {Delta}{epsilon} {eta}={h_bar}/{Delta}{epsilon}. In the conventional classical regime {eta} {much_lt} 1 an electron emits and absorbes a great number of shortwavelength photons over the interaction region, the gain in FEL being the result of these competitive processes. In the quantum limit {eta} {much_gt} 1 the emission and absorption lines are completely separated and thus the FEL becomes a two-level quantum oscillator with a completely inverted active medium. Spontaneous emission causes the electron to leave the range of energies where resonant interaction with the laser field occurs, thus effectively reducing the number of particles that take part in generating the induced X-ray signal. This effect is found to be crucial for lasing in optically pumped X-ray FEL. The characteristic relaxation times are calculated for both classical and quantum FEL regimes. It is shown that spontaneous emission results in FEL electron beam threshold current, which is of rather high value. An optimal range of pumping laser intensities is determined.

  15. Experimental and numerical study of short pulse effects in FELs

    CERN Document Server

    Khodyachykh, S; Genz, H; Hessler, C; Richter, A; Asgekar, V

    2004-01-01

    We report the experimental and numerical investigations of the influence of short pulse effects occurring in FELs in different operational regimes for electron bunch lengths which are of the order of the slippage distance. Several observables such as the small signal gain, the macropulse power and the spectral distribution of the FEL radiation were determined experimentally within the constraints of the stable focus regime at the infrared FEL at the S- DALINAC and for the limit cycle regime at the Dutch near infrared FEL FELIX. The experimental findings were compared to predictions of numerical simulations based on the 1D time dependent code FEL1D-OSC. The agreement between experiment and simulation is good. Furthermore, the simulations reveal a chaotic behavior of the macropulses for specific values of the slippage as well as period-doubling, two effects that are predicted to show up in the spectral distribution.

  16. Experimental and numerical study of short pulse effects in FELs

    Science.gov (United States)

    Khodyachykh, S.; Brunken, M.; Genz, H.; Hessler, C.; Richter, A.; Asgekar, V.

    2004-09-01

    We report the experimental and numerical investigations of the influence of short pulse effects occurring in FELs in different operational regimes for electron bunch lengths which are of the order of the slippage distance. Several observables such as the small signal gain, the macropulse power and the spectral distribution of the FEL radiation were determined experimentally within the constraints of the stable focus regime at the infrared FEL at the S-DALINAC and for the limit cycle regime at the Dutch near infrared FEL FELIX. The experimental findings were compared to predictions of numerical simulations based on the 1D time dependent code FEL1D-OSC. The agreement between experiment and simulation is good. Furthermore, the simulations reveal a chaotic behavior of the macropulses for specific values of the slippage as well as period-doubling, two effects that are predicted to show up in the spectral distribution.

  17. First Results from the DUV-FEL Upgrade at BNL

    CERN Document Server

    Wang, Xijie; Murphy, James; Pinayev, Igor; Rakowsky, George; Rose, James; Shaftan, Timur; Sheehy, Brian; Skaritka, John; Wu, Zilu; Yu Li Hua

    2005-01-01

    The DUV-FEL at BNL is the world’s only facility dedicated to laser-seeded FEL R&D and its applications. Tremendous progress was made in both HGHG FEL and its applications in the last couple years.*,** In response to the requests of many users to study chemical science at the facility, the DUV-FEL linac was upgraded from 200 to 300 MeV to enable the HGHG FEL to produce 100 uJ pulses of 100 nm light. This will establish the DUV FEL as a premier user facility for ultraviolet radiation and enable state-of-the-art gas phase photochemistry research. The upgraded facility will also make possible key R&D experiments such as higher harmonic HGHG (n>5) that would lay the groundwork for future X-ray FEL based on HGHG. The upgraded HGHG FEL will operate at the 4th harmonic with the seed laser at either 800 nm or 400nm. The increase of the electron beam energy will be accomplished by installing a 5th linac cavity and two 45 MW klystrons. New HGHG modulator and dispersion sections vacuum chambers w...

  18. A compact FEL upconverter of coherent radiation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.; Marshall, T.C. [Columbia Univ., New York, NY (United States)

    1995-12-31

    The objective is to generate a powerful millimeter-wave FEL signal in a single pass, using a coherent microwave source (24GHz) to prebunch the electron beam for a harmonically-related wave (72GHz). We use the Columbia FEL facility, operating the electron beam at 600kV, 100A; undulator period = 1.85cm and 250G (K = 0.25); electron beam diameter = 3mm inside a 8.5 mm ID drift tube; guiding field of 8800G. Under these conditions, both the microwave signal (5kW input) and the millimeter signal will show travelling-wave gain in the TE11 mode. We report initial experimental results for the millimeter wave spectrum and find an overall power gain of {approximately}20 for the 24GHz input wave. Also presented will be numerical solutions of the wave growth using the FEL equations with slippage. This device has the advantage of producing a high-power FEL output in a single-pass travelling-wave configuration, obtaining a millimeter wave which is phase-referenced to a coherent laboratory source.

  19. Present and next steps of the JAERI superconducting rf linac based FEL program

    Energy Technology Data Exchange (ETDEWEB)

    Minehara, E.J.; Yamauchi, T.; Sugimoto, M. [FEL Laboratory at Tokai, Advanced Photon Research Center, Kansai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (JP)] (and others)

    2000-03-01

    The JAERI superconducting rf linac based FEL has successfully been lased to produce a 0.3 kW FEL light and 100 kW or larger electron beam output in quasi continuous wave operation in 1999. The 1 kW class output as our present program goal will be achieved to improve the optical out coupling method in the FEL optical resonator, the electron gun, and the electron beam optics in the JAERI FEL driver. As our next 5 year program goal is the 100 kW class FEL light and a few tens MW class electron beam output in average, quasi continuous wave operation of the light and electron beam will be planned in the JAERI superconducting rf linac based FEL facility. Conceptual design options needed for such a very high power operation and shorter wavelength light sources will be discussed to improve and to upgrade the exciting facility. (author)

  20. Free electron lasers: Present status and future challenges

    Energy Technology Data Exchange (ETDEWEB)

    Barletta, W A; Corlett, J N; Emma, P; Huang, Z; Kim, K -J; Lindberg, R; Murphy, J B; Neil, G P; Nguyen, D C; Pellegrini, C; Rimmer, R A; Sannibale, F; Stupakov, G; Walker, R P

    2010-06-01

    With the scientific successes of the soft X-ray FLASH facility in Germany and the recent spectacular commissioning of the Linac Coherent Light Source at SLAC, free electron lasers are poised to take center stage as the premier source of tunable, intense, coherent photons of either ultra-short time resolution or ultra-fine spectral resolution, from the far infrared to the hard X-ray regime. This paper examines the state of the art in FEL performance and the underlying enabling technologies. It evaluates the state of readiness of the three basic machine architectures—SASE FELs, seeded FELs, and FEL oscillators—for the major X-ray science user facilities on the 5–10 years time scale and examines the challenges that lie ahead for FELs to achieve their full potential throughout the entire spectral range. In soft and hard X-rays, high longitudinal coherence, in addition to full transverse coherence, will be the key performance upgrade; ideas using laser-based or self-seeding or oscillators can be expected to be qualitatively superior to today's SASE sources. Short pulses, from femtoseconds to attoseconds, can be realistically envisioned. With high repetition rate electron sources coupled to superconducting radiofrequency linear accelerators, unprecedented average beam brightness will be possible and many users would be served simultaneously by a single accelerator complex.

  1. Free electron lasers: Present status and future challenges

    Energy Technology Data Exchange (ETDEWEB)

    Barletta, W.A. [Department of Physics, Massachusetts Institute of Technology, Bldg. 26-563, 77 Massachusetts Avenue, Cambridge, MA 02139-4307 (United States); Bisognano, J. [Synchrotron Radiation Center, 3731 Schneider Dr., Stoughton, WI 53589-3097 (United States); Corlett, J.N. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Emma, P.; Huang, Z. [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Kim, K.-J.; Lindberg, R. [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States); Murphy, J.B., E-mail: jbm@bnl.go [National Synchrotron Light Source, Building 725C, Upton, NY 11973 (United States); Neil, G.R. [Thomas Jefferson National Accelerator Laboratory, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Nguyen, D.C. [Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545 (United States); Pellegrini, C. [Department of Physics and Astronomy, University of California-Los Angeles, 405 Hilgard Avenue, Los Angeles, CA 90095 (United States); Rimmer, R.A. [Thomas Jefferson National Accelerator Laboratory, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Sannibale, F. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Stupakov, G. [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Walker, R.P. [Diamond Light Source Ltd, Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0DE (United Kingdom); Zholents, A.A. [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States)

    2010-06-21

    With the scientific successes of the soft X-ray FLASH facility in Germany and the recent spectacular commissioning of the Linac Coherent Light Source at SLAC, free electron lasers are poised to take center stage as the premier source of tunable, intense, coherent photons of either ultra-short time resolution or ultra-fine spectral resolution, from the far infrared to the hard X-ray regime. This paper examines the state of the art in FEL performance and the underlying enabling technologies. It evaluates the state of readiness of the three basic machine architectures-SASE FELs, seeded FELs, and FEL oscillators-for the major X-ray science user facilities on the 5-10 years time scale and examines the challenges that lie ahead for FELs to achieve their full potential throughout the entire spectral range. In soft and hard X-rays, high longitudinal coherence, in addition to full transverse coherence, will be the key performance upgrade; ideas using laser-based or self-seeding or oscillators can be expected to be qualitatively superior to today's SASE sources. Short pulses, from femtoseconds to attoseconds, can be realistically envisioned. With high repetition rate electron sources coupled to superconducting radiofrequency linear accelerators, unprecedented average beam brightness will be possible and many users would be served simultaneously by a single accelerator complex.

  2. Extreme ultraviolet resonant inelastic X-ray scattering (RIXS) at a seeded free-electron laser

    Science.gov (United States)

    Dell’Angela, M.; Hieke, F.; Malvestuto, M.; Sturari, L.; Bajt, S.; Kozhevnikov, I. V.; Ratanapreechachai, J.; Caretta, A.; Casarin, B.; Glerean, F.; Kalashnikova, A. M.; Pisarev, R. V.; Chuang, Y.-D.; Manzoni, G.; Cilento, F.; Mincigrucci, R.; Simoncig, A.; Principi, E.; Masciovecchio, C.; Raimondi, L.; Mahne, N.; Svetina, C.; Zangrando, M.; Passuello, R.; Gaio, G.; Prica, M.; Scarcia, M.; Kourousias, G.; Borghes, R.; Giannessi, L.; Wurth, W.; Parmigiani, F.

    2016-12-01

    In the past few years, we have been witnessing an increased interest for studying materials properties under non-equilibrium conditions. Several well established spectroscopies for experiments in the energy domain have been successfully adapted to the time domain with sub-picosecond time resolution. Here we show the realization of high resolution resonant inelastic X-ray scattering (RIXS) with a stable ultrashort X-ray source such as an externally seeded free electron laser (FEL). We have designed and constructed a RIXS experimental endstation that allowed us to successfully measure the d-d excitations in KCoF3 single crystals at the cobalt M2,3-edge at FERMI FEL (Elettra-Sincrotrone Trieste, Italy). The FEL-RIXS spectra show an excellent agreement with the ones obtained from the same samples at the MERIXS endstation of the MERLIN beamline at the Advanced Light Source storage ring (Berkeley, USA). We established experimental protocols for performing time resolved RIXS experiments at a FEL source to avoid X ray-induced sample damage, while retaining comparable acquisition time to the synchrotron based measurements. Finally, we measured and modelled the influence of the FEL mixed electromagnetic modes, also present in externally seeded FELs, and the beam transport with ~120 meV experimental resolution achieved in the presented RIXS setup.

  3. Advanced Electronic Systems for HEP Experiments, Astroparticle Physics, Accelerator Technology, FELs and Fusion; 2013 WILGA January Symposium (in Polish)

    CERN Document Server

    Romaniuk, R S

    2013-01-01

    The cycle of WILGA conferences [wilga.ise.pw.edu.pl] on Photonics and Web Engineering, Advanced Electronic Systems, under the auspices of IEEE, SPIE, KEiT PAN and WEiTI PW was initiated in 1998 by a Research Team PERG/ELHEP ISE PW. The WILGA conferences take place two times a year and the participants are young scientists from this country and abroad. This paper debates chosen topical tracks and some papers presented during the 31 WILGA Conference, which took place on 8-10 February 2013 at the Faculty of WEiTI PW. The conference was attended by over 60 persons. Here we discuss closer the subjects of biomedical electronics and informatics, as well as chosen aspects of applications of advanced electronic circuits and systems. The next 32 WILGA Conference will take place on 27 May – 02 June 2013 in WUT WILGA resort near Warsaw. Proposed conference papers are submitted via the WILGA Conference web page. Email for the correspondence is: photonics@ise.pw.edu.pl. The papers are published in journals Elektronika, I...

  4. High-power FEL design issues - a critical review

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Madey, J.M.J.; O`Shea, P.G. [Duke Univ., Durham, NC (United States)

    1995-12-31

    The high-average power capability of FELs has been much advertised but little realized. In this paper we provide a critical analysis of the technological and economic issues associated with high-average power FEL operation from the UV to near IR. The project of IR FEL for the Siberian Center of photochemical researches is described. The distinguished features of this project are the use of the race-track microtron-recuperator and the {open_quotes}electron output of radiation{close_quotes}. The building for the machine is under reconstruction now. About half of hardware has been manufactured. The assembly of installation began.

  5. Harmonic cascade FEL designs for LUX

    Energy Technology Data Exchange (ETDEWEB)

    Penn, G.; Reinsch, M.; Wurtele, J.; Corlett, J.N.; Fawley, W.M.; Zholents, A.; Wan, W.

    2004-07-16

    LUX is a design concept for an ultrafast X-ray science facility, based on an electron beam accelerated to GeV energies in are circulating linac. Included in the design are short duration (200 fs or shorter FWHM) light sources using multiple stages of higher harmonic generation, seeded by a 200-250 nm laser of similar duration. This laser modulates the energy of a group of electrons within the electron bunch; this section of the electron bunch then produces radiation at a higher harmonic after entering a second, differently tuned undulator. Repeated stages in a cascade yield increasing photon energies up to 1 keV. Most of the undulators in the cascade operate in the low-gain FEL regime. Harmonic cascades have been designed for each pass of the recirculating linac up to a final electron beam energy of 3.1 GeV. For a given cascade, the photon energy can be selected over a wide range by varying the seed laser frequency and the field strength in the undulators. We present simulation results using the codes GENESIS and GINGER, as well as the results of analytical models which predict FEL performance. We discuss lattice considerations pertinent for harmonic cascade FELs, as well as sensitivity studies and requirements on the electron beam.

  6. Coherent π-electron dynamics of (P)-2,2'-biphenol induced by ultrashort linearly polarized UV pulses: angular momentum and ring current.

    Science.gov (United States)

    Mineo, H; Lin, S H; Fujimura, Y

    2013-02-21

    The results of a theoretical investigation of coherent π-electron dynamics for nonplanar (P)-2,2'-biphenol induced by ultrashort linearly polarized UV pulses are presented. Expressions for the time-dependent coherent angular momentum and ring current are derived by using the density matrix method. The time dependence of these coherences is determined by the off-diagonal density matrix element, which can be obtained by solving the coupled equations of motion of the electronic-state density matrix. Dephasing effects on coherent angular momentum and ring current are taken into account within the Markov approximation. The magnitudes of the electronic angular momentum and current are expressed as the sum of expectation values of the corresponding operators in the two phenol rings (L and R rings). Here, L (R) denotes the phenol ring in the left (right)-hand side of (P)-2,2'-biphenol. We define the bond current between the nearest neighbor carbon atoms Ci and Cj as an electric current through a half plane perpendicular to the Ci-Cj bond. The bond current can be expressed in terms of the inter-atomic bond current. The inter-atomic bond current (bond current) depends on the position of the half plane on the bond and has the maximum value at the center. The coherent ring current in each ring is defined by averaging over the bond currents. Since (P)-2,2'-biphenol is nonplanar, the resultant angular momentum is not one-dimensional. Simulations of the time-dependent coherent angular momentum and ring current of (P)-2,2'-biphenol excited by ultrashort linearly polarized UV pulses are carried out using the molecular parameters obtained by the time-dependent density functional theory (TD-DFT) method. Oscillatory behaviors in the time-dependent angular momentum (ring current), which can be called angular momentum (ring current) quantum beats, are classified by the symmetry of the coherent state, symmetric or antisymmetric. The bond current of the bridge bond linking the L and R

  7. Optical properties of infrared FELs from the FELI Facility II

    Energy Technology Data Exchange (ETDEWEB)

    Saeki, K.; Okuma, S.; Oshita, E. [Free Electron Laser Institute, Osaka (Japan)] [and others

    1995-12-31

    The FELI Facility II has succeeded in infrared FEL oscillation at 1.91 {mu} m using a 68-MeV, 40-A electron beam from the FELI S-band linac in February 27, 1995. The FELI Facility II is composed of a 3-m vertical type undulator ({lambda}u=3.8cm, N=78, Km a x=1.4, gap length {ge}20mm) and a 6.72-m optical cavity. It can cover the wavelength range of 1-5{mu}m. The FELs can be delivered from the optical cavity to the diagnostics room through a 40-m evacuated optical pipeline. Wavelength and cavity length dependences of optical properties such as peak power, average power, spectrum width, FEL macropulse, FEL transverse profile are reported.

  8. Free-Electron Laser (FEL) Utilization in Space Applications (Ship-Borne Pointing Accuracy, Deep-Space Communications, and Orbital Debris Tracking)

    Science.gov (United States)

    2011-12-01

    object that impacted this window left an approximately 1 mm crater in the window and was estimated to be approximately 100 microns in size and...extrapolation of that application is to use the FEL to detect and track objects at much larger distances, such as close-approach asteroids or meteors ...Also, if the return is found to be suitably strong, then there is a potential for using the returned light for spectroscopy of the asteroid or meteor

  9. FEL Design Studies at LBNL: Activities and Plans

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, John N.; Fawley, W.; Lidia, S.; Padmore, H.; Penn, G.; Pogorelov, I.; Qiang, J.; Sannibale, F.; Staples, J.; Steier, C.; Venturini, M.; Wan, W.; Wilcox, R.; Zholents, A.

    2007-03-01

    LBNL staff are currently pursuing R&D for future x-ray FELs, and participate in two FEL construction projects. Our strategy is to address the most fundamental challenges, which are the cost-drivers and performance limitations of FEL facilities. An internally funded R&D program is aimed at investigating accelerator physics and technologies in three key areas: (1) Theoretical study, modeling, and experimental development of low emittance, high quantum efficiency cathodes; (2) Design studies of electron beam delivery systems, including emittance manipulations, high-resolution modeling of 6-D phase space, and low-emittance beam transport; and (3) Design studies of optical manipulations of electron beams for seeded and SASE FELs, providing short x-ray pulses of variable duration, synchronous with the seed and pump laser sources, and also long transform-limited pulses with a narrow bandwidth. Design studies of means for production of attosecond x-ray pulses at various wavelengths. We are collaborators in the FERMI{at}Elettra seeded FEL facility under construction at Sincrotrone Trieste, Italy, participating in accelerator design and FEL physics studies, and mechanical and electrical engineering. We are participating in the LCLS project at SLAC, implementing our design of stabilized timing and synchronization systems. Here we outline our long-term objectives, and current activities.

  10. Growth of transverse coherence in SASE FELs

    CERN Document Server

    Kumar, V

    2000-01-01

    We introduce the correlation function between the electric field at two different points in the transverse plane as a parameter to quantify the degree of transverse coherence. We also propose a more realistic model for the initialization of the radiation in computer codes used to study SASE FELs. We make these modifications in the code TDA and use it to study the growth of transverse coherence as a function of electron beam size, beam current and transverse emittance. Our results show explicitly that the onset of full transverse coherence in SASE takes place much before the power saturates. With the more realistic model the onset of the exponential growth regime is delayed, and to get a given power from the FEL one needs a longer undulator than would be predicted by the original TDA code.

  11. Possible enhancement of SASE FEL output field intensity induced by local phase jump

    Science.gov (United States)

    Varfolomeev, A. A.; Yarovoi, T. V.; Bousine, P. V.

    1998-02-01

    A possible influence on the FEL dynamics of a locally induced phase jump between the FEL radiation and electron beam is considered. A numerical study has been made for the SASE mode FEL supposing that the phase jumps are introduced at different depths inside the undulator. The FEL evolution starting from a small input signal was studied in 1D high gain approach. It was shown that the FEL radiation output is sensitive to the phase jump value if it is introduced at the depth where saturation of output power takes places. In the steady state regime, the phase displacement of order ˜π provides enhancement of the peak output power up to 50%. Some kind of optical tapering is also possible giving further FEL efficiency enhancement.

  12. Macro-particle FEL model with self-consistent spontaneous radiation

    CERN Document Server

    Litvinenko, Vladimir N

    2015-01-01

    Spontaneous radiation plays an important role in SASE FELs and storage ring FELs operating in giant pulse mode. It defines the correlation function of the FEL radiation as well as its many spectral features. Simulations of these systems using randomly distributed macro-particles with charge much higher that of a single electron create the problem of anomalously strong spontaneous radiation, limiting the capabilities of many FEL codes. In this paper we present a self-consistent macro-particle model which provided statistically exact simulation of multi-mode, multi-harmonic and multi-frequency short-wavelength 3-D FELs including the high power and saturation effects. The use of macro-particle clones allows both spontaneous and induced radiation to be treated in the same fashion. Simulations using this model do not require a seed and provide complete temporal and spatial structure of the FEL optical field.

  13. FEL options for power beaming

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.J.; Zholents, A.A.; Zolotorev, M.S. [Lawrence Berkeley National Lab., CA (United States); Vinokurov, N.A. [Budker Inst. of Nuclear Physics, Novosibirsk (Russian Federation)

    1997-10-01

    The demand for the output power of communication satellites has been increasing exponentially. The satellite power is generated from solar panels which collect the sunlight and convert it to electrical power. The power per satellite is limited due to the limit in the practical size of the solar panel. One way to meet the power demand is to employ multiple satellites (up to 10) per the internationally agreed-upon ``slot`` in the geosynchronous earth orbit (GEO). However, this approach is very expensive due to the high cost of sending a satellite into a GEO orbit. An alternative approach is power beaming, i.e., to illuminate the solar panels with high power, highly-directed laser beams from earth. The power beaming generates more power per satellite for the same area of the solar panel. The minimum optical beam power, interesting for power beaming application, is P{sub L} = 200kW. The wavelength is chosen to be {lambda} = 0.84 {micro}m, so that it is within one of the transmission windows of the air, and at the same time near the peak of the photo-voltaic conversion efficiency of Si, which is the commonly used material for the solar panels. Free electron lasers (FELs) are well suited for the power beaming application because they can provide high power with coherent wavefront, but without high energy density in media. In this article the authors discuss some principal issues, such as the choice of accelerator and electron gun, the choice of beam parameters, radiation hazards, technological availability, and overall efficiency and reliability of the installation. They also attempt to highlight the compromise between the cost of the primary installation, the operation cost, and the choice of technology, and its maturity. They then present several schemes for the accelerator-FEL systems based on RF accelerators. The initial electron beam accelerator up to the energy of a few MeV is more or less common for all these schemes.

  14. First measurements of electron-beam transit times and micropulse elongation in a photoelectric injector at the High-Brightness Accelerator FEL (HIBAF)

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Carlsten, B.E.; Feldman, R.B.

    1990-01-01

    Key aspects of the dynamics of a photoelectric injector (PEI) on the Los Alamos High-Brightness Accelerator FEL (HIBAF) facility have been investigated using a synchroscan streak camera. By phase-locking the streak camera sweep to the reference 108.3 MHz rf signal, the variations of micropulse temporal elongations (30 to 80% over the drive-laser pulse length) and of transit times (25 ps for a 16{degree}-phase change) were observed for the first time. These results were in good agreement with PARMELA simulations. 2 refs., 8 figs.

  15. Application of a PWFA to an X-ray FEL

    CERN Document Server

    Israeli, Yasmine; Reiche, Sven; Pedrozzi, Marco; Muggli, Patric

    2016-01-01

    There is a growing demand for X-ray Free-electron lasers (FELs) in various science fields, in particular for those with short pulses, larger photon fluxes and shorter wavelengths. The level of X-ray power and the pulse energy depend on the amount of electron bunch energy. Increasing the latter will increase the power of the radiating X-rays. Using numerical simulations we explore the possibility of using a plasma wakefield accelerator (PWFA) scheme to increase the electron beam energy of an existing FEL facility without significantly increasing the accelerator length. In this paper we use parameters of the SwissFEL beam. The simulations are carried out in 2D cylindrical symmetry using the code OSIRIS. Initial results show an energy gain of ~2 GeV after propagation of 0.5 m in the plasma with a relative energy spread of ~1%.

  16. Ultrashort laser ablation of metals: pump probe experiments, the role of ballistic electrons and the two-temperature model

    Science.gov (United States)

    Schmidt, V.; Husinsky, W.; Betz, G.

    2002-09-01

    The dynamics of laser ablation from metallic surfaces (Ag, Al, Fe and Ni) induced by the combined effect of two 30 fs sub-threshold laser pulses has been examined. In a pump-probe setup the yield of the emitted secondary ions and neutrals has been determined as a function of the delay between the two laser pulses. The instantaneous generation of highly excited (ballistic) electrons by the laser pulse and the thermal properties of the metal, which have been modified to be valid into the regime of high electron temperatures have been found to be determining factors for the ablation process. Unexpectedly, two distinct maxima for particle emission have been observed as a function of the time separation of the pump and the probe pulse. The energy relaxation is discussed within the frame of the two-temperature model (TTM) and it is shown that the measured behavior (in the time domain) of ablated particles can only be explained by taking into account a general expression for the thermal conductivity, valid for a wide range of electron temperatures and in addition a substantial role of hot, ballistic electrons.

  17. Harmonic lasing in X-ray FELs

    CERN Document Server

    Schneidmiller, E A

    2012-01-01

    Harmonic lasing in a free electron laser with a planar undulator (under the condition that the fundamental frequency is suppressed) might be a cheap and efficient way of extension of wavelength ranges of existing and planned X-ray FEL facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide much more intense, stable, and narrow-band FEL beam which is easier to handle due to the suppressed fundamental frequency. In this paper we perform a parametrization of the solution of the eigenvalue equation for lasing at odd harmonics, and present an explicit expression for FEL gain length, taking into account all essential effects. We propose and discuss methods for suppression of the fundamental harmonic. We also suggest a combined use of harmonic lasing and lasing at the retuned fundamental wavelength in order to reduce bandwidth and to increase brilliance of X-ray beam at saturation. Considering 3rd harmonic lasing as a practical example, we come to the conclusion that it is much more robust...

  18. Characterization of X-Ray FEL Radiation

    CERN Document Server

    Bionta, R M

    2005-01-01

    The Linac Coherent Light Source (LCLS) will generate X-FEL radiation with photon energies tunable from 826 eV to 8261 eV. It is expected that elements of the Linac and Undulator systems will require careful tuning in order to achieve lasing at these wavelengths. The tuning will be guided by measurements of both the electron and photon beam characteristics. The primary characteristics of the photon beam that can be measured are the total pulse energy, its spatial shape, and spectra. During the initial commissioning phase, these measurements will be performed on the spontaneous radiation emitted by one or more undulators as they are added to the LCLS. The next phase of commissioning requires detecting and measuring faint (unsaturated) FEL radiation for the purposes of tuning the Linac and undulator to achieve saturation. During the last phases of commissioning these measurements will have to be performed on the saturated FEL beam. The photon measurements are complicated by the large dynamic range required, the ...

  19. Feedback Requirements for SASE-FELs

    Energy Technology Data Exchange (ETDEWEB)

    Loos, Henrik; /SLAC

    2012-07-06

    The operation of a Self Amplified Spontaneous Emission (SASE) Free Electron Lasers (FEL) at soft and hard X-ray wavelengths driven by a high brightness electron beam imposes strong requirements on the stability of the accelerator and feedback systems are necessary to both guarantee saturation of the SASE process as well as a stable photon beam for user experiments. Diagnostics for the relevant transverse and longitudinal beam parameters are presented and various examples of feedback systems for bunches with low repetition rate as well as systems for intra bunch train feedbacks are discussed.

  20. Harmonic Inverse FEL Interaction at 800nm

    CERN Document Server

    Sears, C M S; Siemann, R; Spencer, J E

    2005-01-01

    The inverse Free Electron Laser (IFEL) interaction has recently been proposed and demonstrated as a premodulator for High Gain Harmonic Generation (HGHG) experiments. These experiments utilized the fundamental of the interaction between the laser field and electron bunch. In the current experiment, we explore the higher order resonances of the IFEL interaction from a 3 period, 1.8 centimeter wavelength undulator with a picosecond, 0.25 mJ/pulse laser at 800nm. The resonances are observed by adjusting the gap of the undulator while keeping the beam energy constant. The harmonic IFEL can add flexibility to HGHG FEL design.

  1. Step-tapered operation of the FEL: Efficiency enhancement and two-colour operation

    NARCIS (Netherlands)

    Jaroszynski, D. A.; Prazeres, R.; Glotin, F.; Marcouille, O.; Ortega, J. M.; Oepts, D.; van der Meer, A. F. G.; Knippels, G.M.H.; van Amersfoort, P. W.

    1996-01-01

    We present measurements of the temporal and spectral properties of radiation produced from the step-tapered undulator infrared free-electron lasers (FELs), CLIO in France and FELIX in the Netherlands. Using a two section undulator with independently adjustable deflection parameters, K, the FEL will

  2. A table-top x-ray FEL based on a laser wakefield accelerator-undulator system

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, K.; Kawakubo, T.; Nakanishi, H. [National Lab. for High Energy Physics, Ibaraki-ken (Japan)] [and others

    1995-12-31

    Ultrahigh-gradient electron acceleration has been confirmed owing to the laser wakefield acceleration mechanism driven by an intense short laser wakefield acceleration mechanism driven by an intense short laser pulse in an underdense plasma. The laser wakefield acceleration makes it possible to build a compact electron linac capable of producing an ultra-short bunched electron beam. While the accelerator is attributed to longitudinal wakefields, transverse wakefields simultaneously generated by a short laser pulse can serve as a plasma undulator with a very short wavelength equal to a half of the plasma wavelength. We propose a new FEL concept for X-rays based on a laser wakefield accelerator-undulator system driven by intense short laser pulses delivered from table-top terawatt lasers. The system is composed of the accelerator stage and the undulator stage in a table-top size. A low energy electron beam is accelerated an bunched into microbunches due to laser wakefields in the accelerator stage. A micro-bunched beam travelling to the opposite direction of driving laser pulses produces coherent X-ray radiation in the undulator stage. A practical configuration and its analyses are presented.

  3. Quasi-isochronous storage ring for enhanced FEL performance

    Science.gov (United States)

    Ohgaki, H.; Robin, D.; Yamazaki, T.

    1996-02-01

    A compact storage ring is designed to be used as driver for a free electron laser (FEL). This ring can be operated very close to zero momentum compaction factor (α) to increase the electron density and thus the gain of the FEL. In order to control α with zero dispersion in the straight sections we use an inverted dipole located between the bending magnets and 4 families of quadrupoles. By using 3 families of sextupoles we can control the 2 transverse chromaticities and 2nd order momentum compaction. We find that the ring has sufficient dynamic aperture for good performance.

  4. Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti-Sa Laser Produced in Xe Gas

    CERN Document Server

    Lambert, G

    2005-01-01

    In order to reach very short wavelengths in systems based on Free Electrons Laser (FEL), and to have a more compact, fully coherent and tunable source, a particular seeding configuration is studied here. It is foreseen to test it as a demonstration experiment in 2006 into the SCSS phase 1 facility (Spring-8 Compact Sase Source, Japan). SCSS phase 1 is a linac-based FEL project, providing a compact SASE source with high brightness in the X-ray range. The external laser source, which is employed, is straightfully in the XUV range, the 13th harmonic of a Ti:Sa femtosecond laser (61.5 nm), generated in Xe gas. This harmonic can be now easily generated by focusing the Ti: Sa laser (25 mJ, 10 Hz, 100 fs) on a 10 Hz pulsed Xe gas cell. This High order Harmonics Generation (HHG) process provides us with a VUV beam with intense (1 μJ) and ultra-short (50 fs) properties.

  5. Towards possible opportunities in nuclear materials science and technology at an X-ray free electron laser research facility

    Science.gov (United States)

    Froideval, A.; Badillo, A.; Bertsch, J.; Churakov, S.; Dähn, R.; Degueldre, C.; Lind, T.; Paladino, D.; Patterson, B. D.

    2011-09-01

    Spectroscopy and imaging of condensed matter have benefited greatly from the availability of intense X-ray beams from synchrotron sources, both in terms of spatial resolution and of elemental specificity. The advent of the X-ray free electron laser (X-ray FEL) provides the additional features of ultra-short pulses and high transverse coherence, which greatly expand possibilities to study dynamic processes and to image non-crystalline materials. The proposed SwissFEL facility at the Paul Scherrer Institute is one of at present four X-ray FEL projects worldwide and is scheduled to go into operation in the year 2017. This article describes a selection of problems in nuclear materials science and technology that would directly benefit from this and similar X-ray FEL sources. X-ray FEL-based experiments are proposed to be conducted on nuclear energy-related materials using single-shot X-ray spectroscopy, coherent X-ray scattering and/or X-ray photon correlation spectroscopy in order to address relevant scientific questions such as the evolution in time of the irradiation-induced damage processes, the deformation processes in nuclear materials, the ion diffusion processes in the barrier systems of geological repositories, the boiling heat transfer in nuclear reactors, as well as the structural characterization of graphite dust in advanced nuclear reactors and clay colloid aggregates in the groundwater near a radioactive waste repository.

  6. Photoinjector RF cavity design for high power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Young, L. M. (Lloyd M.); Schultheiss, T. (Thomas); Christina, V.; Rathke, J.

    2003-01-01

    The project is under way to develop a key enabling technology for highpower CW FEL: an RF photoinjector capable of producing continuous average current greater than 100 mA. The specific aim is a n-mode, normalconducting IW photoinjector, 3 nC of bunch charge, 100 mA of current (at 33.3-MHz bunch repetition rate) and emittance less than 10 mm-mad. This level of performance will enable robust 100-kW-class FEL operation with electron beam energy <100 MeV, thereby reducing the size and cost of the FEL. This design is scalable to the MW power level by increasing the electron bunch repetition rate to a higher value. The major challenges are emittance control and high heat flux within the CW 700-MHz RF cavities. Results of RF cavity design and cooling schemes are presented, including both high-velocity water and liquid-nitrogen cooling options.

  7. Injection system for microtron-based terehertz FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kazakevich, Grigory M.; Kuznetsov, Gennady I.; Pavlov, Viatcheslav M.; /Novosibirsk, IYF; Jeong, Young Uk; Park, Seong Hee; Lee, Byung Cheol; /KAERI, Taejon

    2005-09-01

    A reliable injection system of the widely tunable microtron-based terahertz Free Electron Laser (FEL) has been developed and during last few years provides stable operation of the FEL for users. The system is based on the long-life thermionic cathode assembly using 2.5 mm-in diameter monocrystalline LaB{sub 6} emitter, heated by the tungsten cylindrical filament with the power consumption less than 55 W. The cathode emits the macro-pulse current in the range of 1-1.4 A providing operation of the terahertz FEL during more than 1000 h. The cathode assembly is installed on the cover of the I-type microtron accelerating cavity in location providing an efficient injection for the acceleration with variable number of orbits. This variation widely changes the energy of the electron beam and allows on-the-fly retuning of the FEL in the range of 1-3 THz. Pulse-signal system stabilizing the emission current prevents randomized break-downs in the accelerating cavity and decreases fluctuations of the power of the FEL radiation. The standard deviation of the fluctuations was measured to be less than 10% during long-time operation.

  8. Injection System for Microtron-Based Terahertz FEL

    CERN Document Server

    Kazakevich, G M

    2005-01-01

    A reliable injection system of the widely tunable microtron-based terahertz Free Electron Laser (FEL) has been developed and during last few years provides stable operation of the FEL for users. The system is based on the long-life thermionic cathode assembly using 2.5 mm-in diameter monocrystalline LaB6 emitter, heated by the tungsten cylindrical filament with the power consumption less than 50 W. The cathode emits the macro-pulse current in the range of 1-1.4 A providing operation of the terahertz FEL during more than 1000 h. The cathode assembly is installed on the cover of the I-type microtron accelerating cavity in location providing an efficient injection for the acceleration with variable number of orbits. This variation widely changes the energy of the electron beam and allows on-the-fly retuning of the FEL in the range of 1-3 THz. Pulse-signal system stabilizing the emission current prevents randomized break-downs in the accelerating cavity and decreases macro-pulse power fluctuations of the FEL radi...

  9. Ultrashort single-wall carbon nanotubes reveal field-emission coulomb blockade and highest electron-source brightness.

    Science.gov (United States)

    Pascale-Hamri, A; Perisanu, S; Derouet, A; Journet, C; Vincent, P; Ayari, A; Purcell, S T

    2014-03-28

    We present here well-defined Coulomb staircases using an original field-emission experiment on several individual in situ-grown single-wall carbon nanotubes. A unique in situ process was applied nine times to progressively shorten one single-wall carbon nanotube down to ≃10  nm, which increased the oscillations periods from 5.5 to 80 V, the temperature for observable Coulomb staircase to 1100 K and the currents to 1.8  μA. This process led to the brightest electron source ever reported [9×1011  A/(str m2 V)].

  10. The time resolved measurement of ultrashort terahertz-band electric fields without an ultrashort probe

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, D. A., E-mail: david.walsh@stfc.ac.uk; Snedden, E. W. [Accelerator Science and Technology Centre, STFC Daresbury National Laboratory, Warrington WA4 4AD (United Kingdom); Jamison, S. P. [Accelerator Science and Technology Centre, STFC Daresbury National Laboratory, Warrington WA4 4AD (United Kingdom); Photon Science Institute, The University of Manchester, Manchester M13 9PL (United Kingdom)

    2015-05-04

    The time-resolved detection of ultrashort pulsed THz-band electric field temporal profiles without an ultrashort laser probe is demonstrated. A non-linear interaction between a narrow-bandwidth optical probe and the THz pulse transposes the THz spectral intensity and phase information to the optical region, thereby generating an optical pulse whose temporal electric field envelope replicates the temporal profile of the real THz electric field. This optical envelope is characterised via an autocorrelation based FROG (frequency resolved optical gating) measurement, hence revealing the THz temporal profile. The combination of a narrow-bandwidth, long duration, optical probe, and self-referenced FROG makes the technique inherently immune to timing jitter between the optical probe and THz pulse and may find particular application where the THz field is not initially generated via ultrashort laser methods, such as the measurement of longitudinal electron bunch profiles in particle accelerators.

  11. The time resolved measurement of ultrashort THz-band electric fields without an ultrashort probe

    CERN Document Server

    Walsh, David A; Jamison, Steven P

    2015-01-01

    The time-resolved detection of ultrashort pulsed THz-band electric field temporal profiles without an ultrashort laser probe is demonstrated. A non-linear interaction between a narrow-bandwidth optical probe and the THz pulse transposes the THz spectral intensity and phase information to the optical region, thereby generating an optical pulse whose temporal electric field envelope replicates the temporal profile of the real THz electric field. This optical envelope is characterised via an autocorrelation based FROG measurement, hence revealing the THz temporal profile. The combination of a narrow-bandwidth, long duration, optical probe and self-referenced FROG makes the technique inherently immune to timing jitter between the optical probe and THz pulse, and may find particular application where the THz field is not initially generated via ultrashort laser methods, such as the measurement of longitudinal electron bunch profiles in particle accelerators.

  12. Analysis of FEL-based CeC amplification at high gain limit

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G. [Brookhaven National Lab. (BNL), Upton, NY (United States); Litvinenko, V. [Brookhaven National Lab. (BNL), Upton, NY (United States); Jing, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-03

    An analysis of Coherent electron Cooling (CeC) amplifier based on 1D Free Electron Laser (FEL) theory was previously performed with exact solution of the dispersion relation, assuming electrons having Lorentzian energy distribution. At high gain limit, the asymptotic behavior of the FEL amplifier can be better understood by Taylor expanding the exact solution of the dispersion relation with respect to the detuning parameter. In this work, we make quadratic expansion of the dispersion relation for Lorentzian energy distribution and investigate how longitudinal space charge and electrons’ energy spread affect the FEL amplification process.

  13. Ultrashort X-ray pulse science

    Energy Technology Data Exchange (ETDEWEB)

    Chin, Alan Hap [Univ. of California, Berkeley, CA (US). Dept. of Physics; Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    1998-05-01

    A variety of phenomena involves atomic motion on the femtosecond time-scale. These phenomena have been studied using ultrashort optical pulses, which indirectly probe atomic positions through changes in optical properties. Because x-rays can more directly probe atomic positions, ultrashort x-ray pulses are better suited for the study of ultrafast structural dynamics. One approach towards generating ultrashort x-ray pulses is by 90° Thomson scattering between terawatt laser pulses and relativistic electrons. Using this technique, the author generated ~ 300 fs, 30 keV (0.4 Å) x-ray pulses. These x-ray pulses are absolutely synchronized with ultrashort laser pulses, allowing femtosecond optical pump/x-ray probe experiments to be performed. Using the right-angle Thomson scattering x-ray source, the author performed time-resolved x-ray diffraction studies of laser-perturbated InSb. These experiments revealed a delayed onset of lattice expansion. This delay is due to the energy relaxation from a dense electron-hole plasma to the lattice. The dense electron-hole plasma first undergoes Auger recombination, which reduces the carrier concentration while maintaining energy content. Longitudinal-optic (LO) phonon emission then couples energy to the lattice. LO phonon decay into acoustic phonons, and acoustic phonon propagation then causes the growth of a thermally expanded layer. Source characterization is instrumental in utilizing ultrashort x-ray pulses in time-resolved x-ray spectroscopies. By measurement of the electron beam diameter at the generation point, the pulse duration of the Thomson scattered x-rays is determined. Analysis of the Thomson scattered x-ray beam properties also provides a novel means of electron bunch characterization. Although the pulse duration is inferred for the Thomson scattering x-ray source, direct measurement is required for other x-ray pulse sources. A method based on the laser-assisted photoelectric effect (LAPE) has been demonstrated as a

  14. Ultrashort X-ray pulse science

    Energy Technology Data Exchange (ETDEWEB)

    Chin, Alan Hap [Univ. of California, Berkeley, CA (US). Dept. of Physics; Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    1998-05-01

    A variety of phenomena involves atomic motion on the femtosecond time-scale. These phenomena have been studied using ultrashort optical pulses, which indirectly probe atomic positions through changes in optical properties. Because x-rays can more directly probe atomic positions, ultrashort x-ray pulses are better suited for the study of ultrafast structural dynamics. One approach towards generating ultrashort x-ray pulses is by 90{sup o} Thomson scattering between terawatt laser pulses and relativistic electrons. Using this technique, the author generated {approx} 300 fs, 30 keV (0.4 {angstrom}) x-ray pulses. These x-ray pulses are absolutely synchronized with ultrashort laser pulses, allowing femtosecond optical pump/x-ray probe experiments to be performed. Using the right-angle Thomson scattering x-ray source, the author performed time-resolved x-ray diffraction studies of laser-perturbated InSb. These experiments revealed a delayed onset of lattice expansion. This delay is due to the energy relaxation from a dense electron-hole plasma to the lattice. The dense electron-hole plasma first undergoes Auger recombination, which reduces the carrier concentration while maintaining energy content. Longitudinal-optic (LO) phonon emission then couples energy to the lattice. LO phonon decay into acoustic phonons, and acoustic phonon propagation then causes the growth of a thermally expanded layer. Source characterization is instrumental in utilizing ultrashort x-ray pulses in time-resolved x-ray spectroscopies. By measurement of the electron beam diameter at the generation point, the pulse duration of the Thomson scattered x-rays is determined. Analysis of the Thomson scattered x-ray beam properties also provides a novel means of electron bunch characterization. Although the pulse duration is inferred for the Thomson scattering x-ray source, direct measurement is required for other x-ray pulse sources. A method based on the laser-assisted photoelectric effect (LAPE) has

  15. Improvement of the beam quality by chromaticity correction for wavelength shortening in the NIJI-IV FEL

    CERN Document Server

    Sei, N; Ohgaki, H; Litvinenko, V N; Mikado, T; Yamazaki, T

    1999-01-01

    Electron-beam qualities improved by chromaticity correction in the storage ring NIJI-IV were investigated at the beam energy of 309 MeV. Sextupole-quadrupole-sextupole (SQS) magnets, which were installed in all of the short-straight sections in NIJI-IV, perfectly corrected a horizontal and a vertical chromaticity. This improvement suppressed a head-tail instability, so that higher beam current (approx 30 mA) and higher peak-electron density (approx 6x10 sup 1 sup 6 m sup - sup 3) were available for FEL experiments. The maximum FEL gain was estimated to be about 2.5% at a wavelength of 240 nm. The lasing of an FEL around 300 nm was achieved in March 1998, and the lasing of an FEL at around 240 nm was successfully observed in May 1998. The shortest wavelength of FELs with the NIJI-IV FEL system was 228 nm.

  16. Terahertz IFEL/FEL Microbunching for Plasma Beatwave Accelerators

    CERN Document Server

    Sung, Chieh; Joshi, Chandrashekhar; Musumeci, Pietro; Pellegrini, Claudio; Ralph, Joseph; Reiche, Sven; Rosenzweig, James E; Tochitsky, Sergei Ya

    2005-01-01

    In order to obtain monoenergetic acceleration of electrons, phase-locked injection using electron microbunches shorter than the accelerating structure is necessary. For a laser-driven plasma beatwave accelerator experiment, we propose to microbunch the electrons by interaction with terahertz (THz) radiation in an undulator via two mechanisms– free electron laser (FEL) and inverse free electron laser (IFEL). Since the high power FIR radiation will be generated via difference frequency mixing in GaAs by the same CO2 beatwave used to drive the plasma wave, electrons could be phase-locked and pre-bunched into a series of microbunches separated with the same periodicity. Here we examine the criteria for undulator design and present simulation results for both IFEL and FEL approaches. Using different CO2 laser lines, electrons can be microbunched with different periodicity 300 – 100 mm suitable for injection into plasma densities in the range 1016 – 1017 cm-3, respectively. The requiremen...

  17. The bunch compression system at the TESLA test facility FEL

    Science.gov (United States)

    Limberg, T.; Weise, H.; Molodozhentsev, A.; Petrov, V.

    1996-02-01

    A SASE-FEL [A.M. Kontradenko and E.L. Saldin, Particle Accelerators 10 (1980) 207; R. Bonifacio, C. Pellegrini and I.M. Narducci, Opt. Commun. 50 (1884) 373] requires extremely high peak currents which cannot be achieved by electron guns. The bunch length therefore has to be reduced along the accelerating linac, the bunch has to be compressed. In the TTF-FEL this is done with the help of bending magnet chicanes in three stages. We present the lay-out of the scheme as well as first beam dynamics calculations.

  18. STARS A Two Stage High Gain Harmonic Generation FEL Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    M. Abo-Bakr; W. Anders; J. Bahrdt; P. Budz; K.B. Buerkmann-Gehrlein; O. Dressler; H.A. Duerr; V. Duerr; W. Eberhardt; S. Eisebitt; J. Feikes; R. Follath; A. Gaupp; R. Goergen; K. Goldammer; S.C. Hessler; K. Holldack; E. Jaeschke; Thorsten Kamps; S. Klauke; J. Knobloch; O. Kugeler; B.C. Kuske; P. Kuske; A. Meseck; R. Mitzner; R. Mueller; M. Neeb; A. Neumann; K. Ott; D. Pfluckhahn; T. Quast; M. Scheer; Th. Schroeter; M. Schuster; F. Senf; G. Wuestefeld; D. Kramer; Frank Marhauser

    2007-08-01

    BESSY is proposing a demonstration facility, called STARS, for a two-stage high-gain harmonic generation free electron laser (HGHG FEL). STARS is planned for lasing in the wavelength range 40 to 70 nm, requiring a beam energy of 325 MeV. The facility consists of a normal conducting gun, three superconducting TESLA-type acceleration modules modified for CW operation, a single stage bunch compressor and finally a two-stage HGHG cascaded FEL. This paper describes the faciliy layout and the rationale behind the operation parameters.

  19. FERMI@Elettra FEL Design Technical Optimization Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Fawley, William; Penn, Gregory; Allaria, Enrico; De Ninno,Giovanni; Graves, William

    2006-07-31

    This is the final report of the FEL Design Group for the Technical Optimization Study for the FERMI{at}ELETTRA project. The FERMI{at}ELETTRA project is based on the principle of harmonic upshifting of an initial ''seed'' signal in a single pass, FEL amplifier employing multiple undulators. There are a number of FEL physics principles which underlie this approach to obtaining short wavelength output: (1) the energy modulation of the electron beam via the resonant interaction with an external laser seed (2) the use of a chromatic dispersive section to then develop a strong density modulation with large harmonic overtones (3) the production of coherent radiation by the microbunched beam in a downstream radiator. Within the context of the FERMI project, we discuss each of these elements in turn.

  20. R&D Requirements, RF Gun Mode Studies, FEL-2 Steady-StateStudies, Preliminary FEL-1 Time-Dependent Studies, and Preliminary LayoutOption Investigation

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, John; Corlett, John; Doolittle, Larry; Fawley, William; Lidia, Steven; Penn, Gregory; Ratti, Alex; Staples, John; Wilcox Russell; Wurtele, Jonathan; Zholents, Alexander

    2005-10-01

    This report constitutes the third deliverable of LBNLs contracted role in the FERMI {at} Elettra Technical Optimization study. It describes proposed R&D activities for the baseline design of the Technical Optimization Study, initial studies of the RF gun mode-coupling and potential effects on beam dynamics, steady-state studies of FEL-2 performance to 10 nm, preliminary studies of time-dependent FEL-1 performance using electron bunch distribution from the start-to-end studies, and a preliminary investigation of a configuration with FEL sinclined at a small angle from the line of the linac.

  1. Towards imaging of ultrafast molecular dynamics using FELs

    NARCIS (Netherlands)

    Rouzee, A.; Johnsson, P.; Rading, L.; Siu, W.; Huismans, Y.; Duesterer, S.; Redlin, H.; Tavella, F.; Stojanovic, N.; Al-Shemmary, A.; Lepine, F.; Holland, D. M. P.; Schlathölter, Thomas; Hoekstra, R.; Fukuzawa, H.; Ueda, K.; Vrakking, M. J. J.; Hundertmark, A.

    2013-01-01

    The dissociation dynamics induced by a 100 fs, 400 nm laser pulse in a rotationally cold Br-2 sample was characterized by Coulomb explosion imaging (CEI) using a time-delayed extreme ultra-violet (XUV) FEL pulse, obtained from the Free electron LASer in Hamburg (FLASH). The momentum distribution of

  2. Investigation of 3d Effects on Fel Operation

    NARCIS (Netherlands)

    van Werkhoven, G. H. C.; Faatz, B.; Schep, T. J.

    1993-01-01

    An investigation is made of 3D effects on FEL operation by comparing the 3D simulation code TDA with a 1 1/2D model. In the latter model, the full spatial dependence of the radiation field is taken into account, whereas the electrons are treated as moving in a 1D, density-averaged ponderomotive pote

  3. Application of electro-optic sampling in FEL diagnostics

    NARCIS (Netherlands)

    Yan, X.; MacLeod, A. M.; Gillespie, W. A.; Knippels, G.M.H.; Oepts, D.; van der Meer, A. F. G.

    2001-01-01

    The electro-optic sampling technique has been used for the full characterization (both amplitude and phase) of freely propagating pulsed electromagnetic radiation (such as FEL pulses, transition radiation) and for the quasistatic electric field of relativistic electron bunches. Measurements of the e

  4. Status of the project of Novosibirsk high power FEL

    Energy Technology Data Exchange (ETDEWEB)

    Pinayev, I.V.; Erg, G.I.; Gavrilov, N.G. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)] [and others

    1995-12-31

    The project of IR FEL for the Siberian Center of photochemical researches is described. The distinguished features of this project are the use of the race-track microtron-recuperator and the {open_quotes}electron output of radiation{close_quotes}. The building for the machine is under reconstruction now. About half of hardware has been manufactured. The assembly of installation began.

  5. Dislocation structure produced by an ultrashort shock pulse

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Tomoki, E-mail: t-matsu@mapse.eng.osaka-u.ac.jp; Hirose, Akio [Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Suita, Osaka 565-0871 (Japan); Sano, Tomokazu [Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Suita, Osaka 565-0871 (Japan); JST, CREST, Suita, Osaka 565-0871 (Japan); Arakawa, Kazuto [JST, CREST, Suita, Osaka 565-0871 (Japan); Department of Material Science, Interdisciplinary Faculty of Science and Engineering, Shimane University, Matsue, Shimane 690-8504 (Japan)

    2014-11-14

    We found an ultrashort shock pulse driven by a femtosecond laser pulse on iron generates a different dislocation structure than the shock process which is on the nanosecond timescale. The ultrashort shock pulse produces a highly dense dislocation structure that varies by depth. According to transmission electron microscopy, dislocations away from the surface produce microbands via a network structure similar to a long shock process, but unlike a long shock process dislocations near the surface have limited intersections. Considering the dislocation motion during the shock process, the structure near the surface is attributed to the ultrashort shock duration. This approach using an ultrashort shock pulse will lead to understanding the whole process off shock deformation by clarifying the early stage.

  6. Present Status and Results from the KAERI Compact THz FEL Facility

    CERN Document Server

    Jeong, Y U; Lee, B C; Park, S H

    2005-01-01

    We have developed a laboratory-scale users facility with a compact terahertz (THz) free electron laser (FEL). The FEL operates in the wavelength range of 100-1200 μm, which corresponds to 0.3-3 THz. The peak power of the FEL micropulse having 30 ps pulse duration is 1 kW and the pulse energy of the 3-μs-FEL-macropulse is approximately 0.3 mJ. The main application of the FEL is THz imaging for bio-medical researches. Transmitted THz imaging of various samples including bugs have been measured. The samples were scanned by a 2-dimensional stage at the focal point of the THz beam. The bugs were not dry because they were killed just before experiments. We could get the transmitted THz imaging of the bugs at 3 THz with the high power THz FEL. THz spectral characteristics of several materials have been studied by the FEL and a THz FTIR spectrometer. We will introduce recent results on the imaging and spectroscopy by the THz FEL.

  7. The Upgrade of the DUV-FEL Facility at the BNL

    CERN Document Server

    Wang, Xijie; Murphy, James; Rakowsky, George; Rose, James; Sheehy, Brian; Shen, Yuzhen; Skaritka, John; Wu, Zilu; Yu Li Hua

    2004-01-01

    The DUV-FEL at BNL, is the world's only facility dedicated to laser-seeded FEL R&D and its applications. The HGHG at the DUV-FEL reached saturation at 266 nm with 800 nm seeding [1] in 2002. Since then, the first chemical science experiment ? ion pair imaging, was successfully completed [2].The DUV-FEL linac is being upgraded from 200 to 300 MeV to enable the HGHG FEL to produce 100 μJ pulses of 100 nm light. This will establish the DUV FEL as a premier user facility for XUV radiation. The upgraded facility will also enable several critical R&Ds for a future X-ray FEL based on HGHG, such as cascaded HGHG and higher harmonic HGHG (n>5). The upgraded HGHG will operate at the 4th harmonic with the seed laser at 400nm. The increase of the electron beam energy will be accomplished by installing a 5th linac cavity and two 45 MW klystrons. New modulator and dispersion sections vacuum chambers will be manufactured to accommodate new matching optics and 8th harmonic HGHG. The status of the DUV-FEL upgra...

  8. The ARC-EN-CIEL FEL Proposal

    CERN Document Server

    Couprie, M E

    2005-01-01

    ARC-EN-CIEL (Accelerator-Radiation for Enhanced Coherent Intense Extended Light), the French project of a fourth generation light source aims at providing the user community with coherent femtosecond light pulses covering from UV to soft X ray. It is based on a CW 1 GeV superconducting linear accelerator delivering high charge, subpicosecond, low emittance electron bunches with a high repetition rate. The FEL is based on in the injection of High Harmonics in Gases in a High Gain Harmonic Generation scheme, leading to a rather compact solution. The produced radiation extending down to 0.8 nm with the Non Linear Harmonic reproduces the good longitudinal and transverse coherence of the harmonics in gas. Optional beam loops are foreseen to increase the beam current or the energy. They will accommodate fs synchrotron radiation sources in the IR, VUV and X ray ranges and a FEL oscillator in the 10 nm range. An important synergy is expected between accelerator and laser communities. Indeed, electron plasma accelerat...

  9. FEL gain optimisation and spontaneous radiation

    Energy Technology Data Exchange (ETDEWEB)

    Bali, L.M.; Srivastava, A.; Pandya, T.P. [Lucknow Univ. (India)] [and others

    1995-12-31

    Colson have evaluated FEL gains for small deviations from perfect electron beam injection, with radiation of the same polarisation as that of the wiggler fields. We find that for optimum gain the polarisation of the optical field should be the same as that of the spontaneous emission under these conditions. With a helical wiggler the axial oscillations resulting from small departures from perfect electron beam injection lead to injection dependent unequal amplitudes and phases of the spontaneous radiation in the two transverse directions. Viewed along the axis therefore the spontaneous emission is elliptically polarised. The azimuth of the ellipse varies with the difference of phase of the two transverse components of spontaneous emission but the eccentricity remains the same. With planar wigglers the spontaneous emission viewed in the axial direction is linearly polarised, again with an injection dependent azimuth. For optimum coherent gain of a radiation field its polarisation characteristics must be the same as those of the spontaneous radiation with both types of wiggler. Thus, with a helical wiggler and the data reported earlier, an increase of 10% in the FEL gain at the fundamental frequency and of 11% at the fifth harmonic has been calculated in the small gain per pass limit. Larger enhancements in gain may result from more favourable values of input parameters.

  10. Coherence Improvement of the BESSY HGHG FEL Radiation

    CERN Document Server

    Abo-Bakr, M; Meseck, A

    2005-01-01

    BESSY proposes a soft X-ray free electron laser (FEL) multi-user facility. It will consist of three undulator lines, each based on a cascaded High-Gain Harmonic-Generation (HGHG) scheme. With a seed laser, tunable between 230 nm and 460 nm, the desired output radiation wavelength range from 1.24 nm to 51 nm can be covered. Signal to noise ratio and coherence of the HGHG FEL radiation degrades quadratically with the harmonic number. For the short-wavelength BESSY-FEL line, operating on the 225th harmonic of the seed, a cure to this effect and maintaining the coherence is to improve the spectral purity of the output radiation by implementation of a "non-dispersive double-monochromator" system between two HGHG stages. Layout and parameters of such a monochromator section are described. To separate the electron beam path from the optical devices a bypass section is needed. Its design is presented and influences on the electron beam dynamics are discussed. Simulations of the full cascaded HGHG FEL, using the resto...

  11. A wiggler magnet for FEL low voltage operation

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shamma`a, A.; Stuart, R.A.; Lucas, J.

    1995-12-31

    In low voltage FELs (ie, 200kV), operation is necessarily in the microwave frequency range for wiggler periods of the order of cms., so that a waveguide system is mandatory. Also, because of the relatively low velocity of the electron beam, the wiggle amplitude of the electron beam can be much larger than is normal for highly relativistic FELs. Both these factors mean that the electron trajectory must be carefully controlled to avoid beam collision with the waveguide walls. A wiggler system with half poles at entrance and exit is not an acceptable solution because of the offset is gives rise to the electron trajectory. Consequently, we have designed and constructed a wiggler magnet with exponential entrance and exit tapers for a minimal deflection and displacement of the electron beam. Simulations and experimental measurements showed that an on axis trajectory is easily obtainable.

  12. The PixFEL project: Progress towards a fine pitch X-ray imaging camera for next generation FEL facilities

    Science.gov (United States)

    Rizzo, G.; Batignani, G.; Benkechkache, M. A.; Bettarini, S.; Casarosa, G.; Comotti, D.; Dalla Betta, G.-F.; Fabris, L.; Forti, F.; Grassi, M.; Lodola, L.; Malcovati, P.; Manghisoni, M.; Mendicino, R.; Morsani, F.; Paladino, A.; Pancheri, L.; Paoloni, E.; Ratti, L.; Re, V.; Traversi, G.; Vacchi, C.; Verzellesi, G.; Xu, H.

    2016-07-01

    The INFN PixFEL project is developing the fundamental building blocks for a large area X-ray imaging camera to be deployed at next generation free electron laser (FEL) facilities with unprecedented intensity. Improvement in performance beyond the state of art in imaging instrumentation will be explored adopting advanced technologies like active edge sensors, a 65 nm node CMOS process and vertical integration. These are the key ingredients of the PixFEL project to realize a seamless large area focal plane instrument composed by a matrix of multilayer four-side buttable tiles. In order to minimize the dead area and reduce ambiguities in image reconstruction, a fine pitch active edge thick sensor is being optimized to cope with very high intensity photon flux, up to 104 photons per pixel, in the range from 1 to 10 keV. A low noise analog front-end channel with this wide dynamic range and a novel dynamic compression feature, together with a low power 10 bit analog to digital conversion up to 5 MHz, has been realized in a 110 μm pitch with a 65 nm CMOS process. Vertical interconnection of two CMOS tiers will be also explored in the future to build a four-side buttable readout chip with high density memories. In the long run the objective of the PixFEL project is to build a flexible X-ray imaging camera for operation both in burst mode, like at the European X-FEL, or in continuous mode with the high frame rates anticipated for future FEL facilities.

  13. The PixFEL project: Progress towards a fine pitch X-ray imaging camera for next generation FEL facilities

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, G., E-mail: giuliana.rizzo@pi.infn.it [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Batignani, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Benkechkache, M.A. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017, Constantine (Algeria); Bettarini, S.; Casarosa, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Comotti, D. [Università di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Dalla Betta, G.-F. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); TIFPA INFN, I-38123 Trento (Italy); Fabris, L. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); Forti, F. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Grassi, M.; Lodola, L.; Malcovati, P. [Università di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Manghisoni, M. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); and others

    2016-07-11

    The INFN PixFEL project is developing the fundamental building blocks for a large area X-ray imaging camera to be deployed at next generation free electron laser (FEL) facilities with unprecedented intensity. Improvement in performance beyond the state of art in imaging instrumentation will be explored adopting advanced technologies like active edge sensors, a 65 nm node CMOS process and vertical integration. These are the key ingredients of the PixFEL project to realize a seamless large area focal plane instrument composed by a matrix of multilayer four-side buttable tiles. In order to minimize the dead area and reduce ambiguities in image reconstruction, a fine pitch active edge thick sensor is being optimized to cope with very high intensity photon flux, up to 10{sup 4} photons per pixel, in the range from 1 to 10 keV. A low noise analog front-end channel with this wide dynamic range and a novel dynamic compression feature, together with a low power 10 bit analog to digital conversion up to 5 MHz, has been realized in a 110 μm pitch with a 65 nm CMOS process. Vertical interconnection of two CMOS tiers will be also explored in the future to build a four-side buttable readout chip with high density memories. In the long run the objective of the PixFEL project is to build a flexible X-ray imaging camera for operation both in burst mode, like at the European X-FEL, or in continuous mode with the high frame rates anticipated for future FEL facilities.

  14. The GALAXIE all-optical FEL project

    Energy Technology Data Exchange (ETDEWEB)

    Rosenzweig, J. B.; Arab, E.; Andonian, G.; Cahill, A.; Fitzmorris, K.; Fukusawa, A.; Hoang, P.; Jovanovic, I.; Marcus, G.; Marinelli, A.; Murokh, A.; Musumeci, P.; Naranjo, B.; O' Shea, B.; O' Shea, F.; Ovodenko, A.; Pogorelsky, I.; Putterman, S.; Roberts, K.; Shumail, M. [Dept. of Physics and Astronomy, University of California, Los Angeles, 405 Hilgard Ave., Los Angeles, CA 90034 (United States); Dept. of Mechanical and Nuclear Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Dept. of Physics and Astronomy, University of California, Los Angeles, 405 Hilgard Ave., Los Angeles, CA 90034 (United States); and others

    2012-12-21

    We describe a comprehensive project, funded under the DARPA AXiS program, to develop an all-optical table-top X-ray FEL based on dielectric acceleration and electromagnetic undulators, yielding a compact source of coherent X-rays for medical and related applications. The compactness of this source demands that high field (>GV/m) acceleration and undulation-inducing fields be employed, thus giving rise to the project's acronym: GV/m AcceLerator And X-ray Integrated Experiment (GALAXIE). There are numerous physics and technical hurdles to surmount in this ambitious scenario, and the integrated solutions include: a biharmonic photonic TW structure, 200 micron wavelength electromagnetic undulators, 5 {mu}m laser development, ultra-high brightness magnetized/asymmetric emittance electron beam generation, and SASE FEL operation. We describe the overall design philosophy of the project, the innovative approaches to addressing the challenges presented by the design, and the significant progress towards realization of these approaches in the nine months since project initialization.

  15. Stochastic Temporal Properties of the SASE FEL

    Energy Technology Data Exchange (ETDEWEB)

    Krinsky, S.

    2009-08-23

    We review the statistical description of the chaotic time evolution of the radiation from a self-amplified spontaneous-emission free-electron laser in the linear region before saturation. A high-gain, self-amplified spontaneous-emission (SASE) free-electron laser (FEL) [1, 2], based on modern beam technology, has the advantage of operating without a resonator and hence is capable of generating coherent radiation with wavelength down to the x-ray region. The LCLS at SLAC has recently achieved high gain and saturation at 1.5 {angstrom} [3]. A review of SASE theory can be found in ref. [4]. In this paper, we have considered the linear regime before saturation. In the nonlinear saturation regime, SASE is no longer a Gaussian process and analytic treatment is very difficult. A valuable numerical simulation analysis of the statistical behavior in the nonlinear regime can be found in ref. [10,11].

  16. Compact THz FELs and Their Potential in Biological Applications

    CERN Document Server

    Gallerano, G P; Giovenale, E; Messina, G; Spassovsky, I P

    2005-01-01

    Two THz FEL sources are available at ENEA-Frascati covering the spectral range from 90 GHz to 0.7 THz. The first source, the ENEA Compact FEL, is based on a 5 MeV Microtron providing 4 A of peak current in 13 ps bunches. Peak power in excess of 3kW is obtained at 130 GHz. When the beam is focused, a peak E-field greater than 2 kV/cm can be obtained in the micropulse. The second source, FEL-CATS, is based on a 2.5 MeV RF Linac. After the Linac electrons enter a RF device that correlates their distribution in energy and phase. As a result a strong coherent spontaneous emission occurs in the undulator. Power up to several kW has been measured in the macropulse. The absence of a resonator results in a broad band emission from 0.4 to 0.7 THz. The peculiar temporal structure of the emitted radiation allows the investigation of the effects of high peak power, while maintaining a low average power incident on the sample. A variety of biological systems have been studied with the ENEA Compact FEL in the frame of the E...

  17. Mode-Locked Multichromatic X-Rays in a Seeded Free-Electron Laser for Single-Shot X-Ray Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, Dao; Ding, Yuantao; Raubenheimer, Tor; Wu, Juhao; /SLAC

    2012-05-10

    We present the promise of generating gigawatt mode-locked multichromatic x rays in a seeded free-electron laser (FEL). We show that, by using a laser to imprint periodic modulation in electron beam phase space, a single-frequency coherent seed can be amplified and further translated to a mode-locked multichromatic output in an FEL. With this configuration the FEL output consists of a train of mode-locked ultrashort pulses which span a wide frequency gap with a series of equally spaced sharp lines. These gigawatt multichromatic x rays may potentially allow one to explore the structure and dynamics of a large number of atomic states simultaneously. The feasibility of generating mode-locked x rays ranging from carbon K edge ({approx}284 eV) to copper L{sub 3} edge ({approx}931 eV) is confirmed with numerical simulation using the realistic parameters of the linac coherent light source (LCLS) and LCLS-II. We anticipate that the mode-locked multichromatic x rays in FELs may open up new opportunities in x-ray spectroscopy (i.e. resonant inelastic x-ray scattering, time-resolved scattering and spectroscopy, etc.).

  18. Mode-Locked Multichromatic X-Rays in a Seeded Free-Electron Laser for Single-Shot X-Ray Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, Dao; Ding, Yuantao; Raubenheimer, Tor; Wu, Juhao; /SLAC

    2012-05-10

    We present the promise of generating gigawatt mode-locked multichromatic x rays in a seeded free-electron laser (FEL). We show that, by using a laser to imprint periodic modulation in electron beam phase space, a single-frequency coherent seed can be amplified and further translated to a mode-locked multichromatic output in an FEL. With this configuration the FEL output consists of a train of mode-locked ultrashort pulses which span a wide frequency gap with a series of equally spaced sharp lines. These gigawatt multichromatic x rays may potentially allow one to explore the structure and dynamics of a large number of atomic states simultaneously. The feasibility of generating mode-locked x rays ranging from carbon K edge ({approx}284 eV) to copper L{sub 3} edge ({approx}931 eV) is confirmed with numerical simulation using the realistic parameters of the linac coherent light source (LCLS) and LCLS-II. We anticipate that the mode-locked multichromatic x rays in FELs may open up new opportunities in x-ray spectroscopy (i.e. resonant inelastic x-ray scattering, time-resolved scattering and spectroscopy, etc.).

  19. Recent Progress of the NIJI-IV VUV/IR FEL

    CERN Document Server

    Sei, N; Watanabe, K W; Yamada, K Y; Yasumoto, M Y

    2005-01-01

    Free electron lasers (FELs) are being developed in a broad wavelength region from the VUV to the IR with the compact storage ring NIJI-IV at AIST. In the DUV and VUV regions, the FEL is used as an intense light source for real-time surface observation with the photoelectron emission microscopy. To extend the application field of the NIJI-IV FEL, for example to the structural analysis of proteins, experiments to obtain FEL oscillations at the wavelength below 195 nm are going on. In addition, a 3.6-m optical klystron, ETLOK-III, for developing infrared FELs has been installed in the north straight section of the NIJI-IV. Fundamental and higher harmonic spontaneous emissions from the ETLOK-III were observed in the visible and near-infrared regions. It was expected that the FEL gain for the 3rd harmonics exceed 5%. In the presentation, we will report the recent results of the VUV and IR FEL experiments.

  20. FEL Applications in EUV Lithography

    CERN Document Server

    Goldstein, M; Shroff, Y A; Silverman, P J; Williams, D

    2005-01-01

    Semiconductor industry growth has largely been made possible by regular improvements in lithography. State of the art lithographic tools cost upwards of twenty five million dollars and use 0.93 numerical aperture projection optics with 193nm wavelengths to pattern features for 45 nm node development. Scaling beyond the 32 nm feature size node is expected to require extreme ultraviolet (EUV) wavelength light. EUV source requirements and equipment industry plasma source development efforts are reviewed. Exploratory research on a novel hybrid klystron and high gain harmonic generation FEL with oblique laser seeding will be disclosed. The opportunity and challenges for FELs to serve as a second generation (year 2011-2013) source technology in the semiconductor industry are presented.

  1. Half-period optical pulse generation using a free-electron laser

    Energy Technology Data Exchange (ETDEWEB)

    Jaroszynski, D.A.; Chaix, P.; Piovella, N. [Commissariat a l`Energie Atomique, Bruycres-le-Chatel (France)

    1995-12-31

    Recently there has been growth, in interest in non-equilibrium interaction of half-period long optical pulses with matter. To date the optical pulses have been produced by chopping out a half-period long segment from a longer pulse using a semiconductor switch driven by a femtosecond laser. In this paper we present new methods for producing tunable ultra-short optical pulses as short as half an optical period using a free-electron laser driven by electron bunches with a duration a fraction of an optical period. Two different methods relying on the production of coherent spontaneous emission will be described. In the first method we show that when a train of ultra-short optical pulses as short as one half period. We present calculations which show that the small signal gain is unimportant in the early stages of radiation build up in the cavity when the startup process is dominated by coherent spontaneous emission. To support our proposed method we present encouraging experimental results from the FELIX experiment in the Netherlands which show that interference effects between the coherent spontaneous optical pulses at start-up are very important. The second proposed method relies on the fact that coherent spontaneous emission mimics the undulations of electrons as they pass through the undulator. We show that ultra-short optical pulses are produced by coherent spontaneous emission when ultra-short electron bunches pass through an ultra-short undulator. We discuss the interesting case of such undulator radiation in the presence of an optical cavity and show that the optical pulse can be {open_quotes}taylored{close_quotes} by simply adjusting the optical cavity desynchronism. The proposed methods may be realisable using existing rf driven FELs in the far-infrared.

  2. Status and Future Plans of JAERI Eergy-Recovery Linac FEL

    CERN Document Server

    Hajima, R; Kikuzawa, N; Minehara, E J; Nagai, R; Nishimori, N; Nishitani, T; Sawamura, M; Yamauchi, T

    2005-01-01

    An energy-recovery linac for a high-power free-electron laser is in operation at Japan Atomic Energy Research Institute (JAERI). In this paper, we report results of research activities and future plans of JAERI ERL-FEL, which are the construction of FEL transport line, the operation of newly-installed RF controller and IOTs, the development of super-lattice photo cathode.

  3. FELs, nice toys or efficient tools?

    Science.gov (United States)

    van der Meer, A. F. G.

    2004-08-01

    An FEL is an intrinsically interesting device and pushing its performance presents a natural challenge to a physicist. Nonetheless, the main justification for doing FEL research is of course its potential as a unique, versatile source of radiation to be employed for something useful. After 25 years of FEL research, one may wonder how efficient these tools have become. In this paper, I will reflect on this issue from the perspective of 10 years of operation of FELIX as a user facility.

  4. Influence of an imperfect energy profile on a seeded free electron laser performance

    Directory of Open Access Journals (Sweden)

    Botao Jia

    2010-06-01

    Full Text Available A single-pass high-gain x-ray free electron laser (FEL calls for a high quality electron bunch. In particular, for a seeded FEL amplifier and for a harmonic generation FEL, the electron bunch initial energy profile uniformity is crucial for generating an FEL with a narrow bandwidth. After the acceleration, compression, and transportation, the electron bunch energy profile entering the undulator can acquire temporal nonuniformity. We study the influence of the electron bunch initial energy profile nonuniformity on the FEL performance. Intrinsically, for a harmonic generation FEL, the harmonic generation FEL in the final radiator starts with an electron bunch having energy modulation acquired in the previous stages, due to the FEL interaction at those FEL wavelengths and their harmonics. The influence of this electron bunch energy nonuniformity on the harmonic generation FEL in the final radiator is then studied.

  5. Optical Fibre Dosimeter for SASE FEL Undulators

    CERN Document Server

    Körfer, M

    2003-01-01

    Single pass Free Electron Lasers (FELs) based on self-amplified spontaneous emission (SASE) are developed for high brightness and short wavelength applications. They use permanent magnet undulators which are radiation sensitive devices. During accelerator commissioning beam losses can appear anywhere along the undulator line. To avoid damage of the permanent magnets due to radiation, an optical fibre dosimeter system can be used. The increase of absorption caused by ionizing radiation is measured in radiation sensitive optical fibers. The dose system enables relatively fast particle loss tuning during accelerator operation and allows the monitoring of the accumulated dose. Dose measurements in narrow gaps which are inaccessible for any other (online) dosimeter type become possible. The electromagnetic insensitivity of optical fibre sensor is an advantage of applications in strong magnetic undulator fields. At each location the light absorption is measured by using an optical power-meter. The dynamic range is ...

  6. An induction linac developed for FEL application

    Science.gov (United States)

    de Mascureau, J.; Anthouard, Ph.; Bardy, J.; Eyharts, Ph.; Eyl, P.; Launspach, J.; Thevenot, M.; Villate, D.

    1992-07-01

    An induction linac is being studied and built at CESTA for FEL application. At first we studied the induction technology and namely the high-voltage (HV) generators and the induction cells. A HV generator designed to feed the cells with calibrated pulses (150 kV, 50 ns, δV/V magnetic switches. This generator is planned for kHz repetition-rate operation. A prototype induction cell has also been built and tested with a cable generator. An electron injector (1.5 MeV, 1.5kA) has been designed and is now under test: it uses ten induction cells and a thermionic dispenser cathode. Numerical codes have been developed and simulations have been compared with experimental results for HV generators, induction cells, and the injector. An induction accelerating module has been studied and we plan to have the accelerator working at 3 MeV in 1992.

  7. The Infrared Undulator Project at the VUV-FEL

    CERN Document Server

    Grimm, O; Rossbach, J; Saldin, E L; Schneidmiller, E; Yurkov, M V

    2005-01-01

    A special electromagnetic wiggler generating infrared radiation in the range 1-200 microns is planned to be installed at the DESY VUV-FEL in Hamburg by autumn 2006. The device is located after the FEL undulators, using the spent electron beam. The purpose is two-fold: first, it will serve longitudinal electron beam diagnostics, similar to other methods currently investigated using the coherent emission of radiation at wavelengths similar to the bunch length, and second it will be used as a powerful (100 MW peak) source for short (few ps) infrared radiation pulses. The natural, perfect synchronization with the VUV pulses will allow for pump-probe experiments with high timing precision. This paper will give an overview of the project, including the infrared beam transport line.

  8. Quasi-real-time photon pulse duration measurement by analysis of FEL radiation spectra

    Energy Technology Data Exchange (ETDEWEB)

    Engel, Robin, E-mail: robin.engel@uni-oldenburg.de [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Institut für Physik, Carl von Ossietzky Universität Oldenburg, D-26111 Oldenburg (Germany); Institut für Laser und Optik, Hochschule Emden/Leer, University of Applied Sciences, Constantiaplatz 4, D-26723 Emden (Germany); Düsterer, Stefan; Brenner, Günter [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Teubner, Ulrich [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Institut für Physik, Carl von Ossietzky Universität Oldenburg, D-26111 Oldenburg (Germany); Institut für Laser und Optik, Hochschule Emden/Leer, University of Applied Sciences, Constantiaplatz 4, D-26723 Emden (Germany)

    2016-01-01

    Considering the second-order spectral correlation function of SASE-FEL radiation allows a real-time observation of the photon pulse duration during spectra acquisition. For photon diagnostics at free-electron lasers (FELs), the determination of the photon pulse duration is an important challenge and a complex task. This is especially true for SASE FELs with strongly fluctuating pulse parameters. However, most techniques require an extensive experimental setup, data acquisition and evaluation time, limiting the usability in all-day operation. In contrast, the presented work uses an existing approach based on the analysis of statistical properties of measured SASE FEL spectra and implements it as a software tool, integrated in FLASH’s data acquisition system. This allows the calculation of the average pulse durations from a set of measured spectral distributions with only seconds of delay, whenever high-resolution spectra are recorded.

  9. Plasma-driven ultrashort bunch diagnostic

    CERN Document Server

    Dornmair, I; Floettmann, K; Marchetti, B; Maier, A R

    2016-01-01

    Ultrashort electron bunches are crucial for an increasing number of applications, however, diagnosing their longitudinal phase space remains a challenge. We propose a new method that harnesses the strong electric fields present in a laser driven plasma wakefield. By transversely displacing driver laser and witness bunch, a streaking field is applied to the bunch. This field maps the time information to a transverse momentum change and, consequently, to a change of transverse position. We illustrate our method with simulations where we achieve a time resolution in the attosecond range.

  10. Plasma-driven ultrashort bunch diagnostics

    Science.gov (United States)

    Dornmair, I.; Schroeder, C. B.; Floettmann, K.; Marchetti, B.; Maier, A. R.

    2016-06-01

    Ultrashort electron bunches are crucial for an increasing number of applications, however, diagnosing their longitudinal phase space remains a challenge. We propose a new method that harnesses the strong electric fields present in a laser driven plasma wakefield. By transversely displacing driver laser and witness bunch, a streaking field is applied to the bunch. This field maps the time information to a transverse momentum change and, consequently, to a change of transverse position. We illustrate our method with simulations where we achieve a time resolution in the attosecond range.

  11. Seeded quantum FEL at 478 keV

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, Marc [Max-Planck-Institut fuer Quantenoptik, Garching (Germany); Thirolf, Peter; Seggebrock, Thorben [Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany); Habs, Dietrich [Max-Planck-Institut fuer Quantenoptik, Garching (Germany); Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany)

    2012-07-01

    We present for the first time a concept for a seeded {gamma} quantum Free Electron Laser (QFEL) at 478 keV (transition in {sup 7}Li). To produce a highly intense and coherent {gamma} beam, we intend to use a seeded FEL scheme. Important for the production of a highly brilliant and coherent {gamma} beam are novel refractive {gamma} lenses for focusing and an efficient monochromator, allowing to generate a very intense and coherent seed beam. To realize such a coherent {gamma} beam at 478 keV (1/38 A), it is suitable to use a quantum FEL design based on a new ''asymmetric'' laser-electron Compton back scattering scheme as pursued for the MeGaRay and ELI-NP facilities. Here the pulse length of the laser is much longer than the electron bunch length, equivalent to a {gamma}-FEL with laser wiggler. The coherence of a seeded QFEL can open up totally new areas of fundamental physics and applications. Especially, 478 keV can be attractive for ''green energy'' and life-science research, such as the detection of Li deposition in the brain for manic-depressive psychosis treatment with high spatial resolution or isotope-specific nuclear waste management and treatment.

  12. A HIGH REPETITION RATE VUV-SOFT X-RAY FEL CONCEPT

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, J.; Byrd, J.; Fawley, W.M.; Gullans, M.; Li, D.; Lidia,S.M.; Padmore, H.; Penn, G.; Pogorelov, I.; Qiang, J.; Robin, D.; Sannibale, F.; Staples, J.W.; Steier, C.; Venturini, M.; Virostek, S.; Wan, W.; Wells, R.; Wilcox, R.; Wurtele, J.; Zholents, A.

    2007-06-24

    We report on design studies for a seeded FEL light source that is responsive to the scientific needs of the future. The FEL process increases radiation flux by several orders of magnitude above existing incoherent sources, and offers the additional enhancements attainable by optical manipulations of the electron beam: control of the temporal duration and bandwidth of the coherent output, reduced gain length in the FEL, utilization of harmonics to attain shorter wavelengths, and precise synchronization of the x-ray pulse with seed laser systems. We describe an FEL facility concept based on a high repetition rate RF photocathode gun, that would allow simultaneous operation of multiple independent FEL's, each producing high average brightness, tunable over the VUV-soft x-ray range, and each with individual performance characteristics determined by the configuration of the FEL. SASE, enhanced-SASE (ESASE), seeded, harmonic generation, and other configurations making use of optical manipulations of the electron beam may be employed, providing a wide range of photon beam properties to meet varied user demands.

  13. Diagnostic Tools for Operation and Optimization of the ELBE-FEL

    CERN Document Server

    Michel, P; Lehnert, U; Schneider, C; Schurig, R; Seidel, W; Teichert, J; Wohlfarth, D

    2005-01-01

    A FEL in the mid infrared range is one of the applications of the ELBE cw-electron accelerator. The successful operation of the lasing process for the different wavelength is mainly determined by the alignment of the optical cavities, the bunch length and the energy spread of the electron beam so as the transversal adjustment of the beam through the FEL. The energy spread and the bunch length of the electron beam have their minima at different phase conditions of the accelerator. For various energy settings of the accelerator a special adjustment of both parameters has to be found for the lasing process. The presentation describes the diagnostic tools used at ELBE for the correct alignment of the optical cavity, the steering of the electron beam through the FEL and the adjustment of the electron beam parameters with respect to energy spread and bunch length.

  14. Single-shot method for measuring femtosecond bunch length in linac-based free-electron lasers

    Directory of Open Access Journals (Sweden)

    Z. Huang

    2010-09-01

    Full Text Available There is growing interest in the generation and characterization of femtosecond and subfemtosecond pulses from linac-based free-electron lasers (FELs. In this report, following the method of Ricci and Smith [Phys. Rev. ST Accel. Beams 3, 032801 (2000PRABFM1098-440210.1103/PhysRevSTAB.3.032801], we investigate the measurement of the longitudinal bunch profile of an ultrashort electron bunch produced by these FELs. We show that this method can be applied in a straightforward manner at x-ray FEL facilities such as the Linac Coherent Light Source by slightly adjusting the second bunch compressor followed by running the bunch on an rf zero-crossing phase of the final linac. We find that the linac wakefield strongly perturbs the measurement, and through analysis show that it can be compensated in a simple way. We demonstrate the effectiveness of this method and wakefield compensation through numerical simulations, including effects of coherent synchrotron radiation and longitudinal space charge. When used in conjunction with a high-resolution electron spectrometer, this method potentially reveals the temporal profile of the electron beam down to the femtosecond and subfemotsecond scale.

  15. FELS, nice toys or efficient tools?

    NARCIS (Netherlands)

    van der Meer, A. F. G.

    2004-01-01

    An FEL is an intrinsically interesting device and pushing its performance presents a natural challenge to a physicist. Nonetheless, the main justification for doing FEL research is of course its potential as a unique, versatile source of radiation to be employed for something useful. After 25 years

  16. Derivation of FEL Gain Using Wakefield Approach

    Energy Technology Data Exchange (ETDEWEB)

    Stupakov, Gennady V.

    2003-05-27

    We describe the one-dimensional SASE FEL instability using the wake approach. First, we obtain an expression for the longitudinal 1-D wake in a helical undulator. We then show that taking into account the retardation effect in the Vlasov equation with the proper wake leads to the correct result for the FEL instability, in agreement with the traditional theory.

  17. Single spike operation in SPARC SASE-FEL

    Energy Technology Data Exchange (ETDEWEB)

    Boscolo, M. [INFN/LNF, Via Enrico Fermi 40, 00044 Frascati, Roma (Italy)], E-mail: Manuela.Boscolo@lnf.infn.it; Ferrario, M. [INFN/LNF, Via Enrico Fermi 40, 00044 Frascati, Roma (Italy); Boscolo, I.; Castelli, F.; Cialdi, S.; Petrillo, V. [University of Milano, Via Celoria 16, 20133 Milano (Italy); Bonifacio, R. [CBPF, Rio de Janeiro (Brazil); Palumbo, L. [La Sapienza, Roma (Italy); Serafini, L. [INFN/MI, Via Celoria 16, 20133 Milano (Italy)

    2008-08-01

    We describe in this paper a possible experiment with the existing SPARC photoinjector to test the generation of sub-picosecond high brightness electron bunches able to produce single spike radiation pulses at 500 nm in the SPARC self-amplified spontaneous emission free-electron laser (SASE-FEL). The main purpose of the experiment will be the production of short electron bunches as long as few SASE cooperation lengths and to validate scaling laws to foresee operation at shorter wavelength in the future operation with SPARX. The basic physics, the experimental parameters and 3D simulations are discussed.

  18. The formation of transverse coherence in SASE FELs

    CERN Document Server

    Saldin, E L; Yurkov, M V

    1999-01-01

    This report presents a fully three-dimensional study of the amplification process in the self amplified spontaneous emission (SASE) free electron laser. Investigations are based on the data obtained with the three-dimensional, time-dependent FEL simulation code FAST. Analysis of the data shows that the statistical properties of the radiation can be described with Gaussian statistics. In particular, fluctuations of the instantaneous radiation intensity at one space point follow the negative exponential law, while the finite-time integrals of the radiation intensity (both in space and in time) follow a gamma-distribution. Numerical examples presented in the paper correspond to the 70 nm SASE FEL under construction at the TESLA test facility at DESY.

  19. Locking Lasers to RF in an Ultra Fast FEL

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, R.; Huang, G.; Doolittle, L.; White, W.; Frisch, J.; Coffee, R.

    2010-01-02

    Using a novel, phase-stabilized RF-over-fiber scheme, they transmit 3GHz over 300m with 27fs RMS error in 250kHz bandwidth over 12 hours, and phase lock a laser to enable ultrafast pump-probe experiments. Free-electron lasers (FELs) are capable of producing short-duration (< 10fs), high-energy X-ray pulses for a range of scientific applications. The recently activated Linac Coherent Light Source (LCLS) FEL facility at SLAC will support experiments which require synchronized light pulses for pump-probe schemes. They developed and operated a fiber optic RF transmission system to synchronize lasers to the emitted X-ray pulses, which was used to enable the first pump-probe experiments at the LCLS.

  20. Accelerating Rf System Of Microtron-recuperator For Fel

    CERN Document Server

    Arbuzov, V S; Gorniker, E I; Kendjebulatov, E K; Kolobanov, E I; Kondakov, A A; Krutikhin, S A; Kuptsov, I V; Kurkin, G Ya; Medvedev, L E; Motygin, S V; Osipov, V N; Petrov, V M; Pilan, Andrey M; Popov, A M; Sedlyarov, I K; Tribendis, A G

    2004-01-01

    FEL (Free Electron Laser) for the Siberian Centre of Photochemical Research is constructed in Novosibirsk. Parameters and last results received on a RF system of the race-track microtron-recuperator for FEL are given in the report. The frequency of the RF system is 180.4 MHz. The RF system operates in continuous mode. The 16 cavities are used in accelerating system of the microtron-recuperator. The RF system is consists of two channels. Each of two 600kW generators drives 8 cavities. Each channel was tested at 7500 kV on the gaps of 8 cavities. The RF power was 630 kW per channel. Now, the accelerating RF system operates at 13600 kV on 16 cavities. Total power of generators is 1100kW.

  1. First lasing of the IR upgrade FEL at Jefferson lab

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Behre; Stephen Benson; George Biallas; James Boyce; Christopher Curtis; David Douglas; H. Dylla; L. Dillon-townes; Richard Evans; Albert Grippo; Joseph Gubeli; David Hardy; John Heckman; Carlos Hernandez-Garcia; Tommy Hiatt; Kevin Jordan; Nikolitsa Merminga; George Neil; Joseph Preble; Harvey Rutt; Michelle D. Shinn; Timothy Siggins; Hiroyuki Toyokawa; David W. Waldman; Richard Walker; Neil Wilson; Byung Yunn; Shukui Zhang

    2004-08-01

    We report initial lasing results from the IR Upgrade FEL at Jefferson Lab[1]. The electron accelerator was operated with low average current beam at 80 MeV. The time structure of the beam was 120 pC bunches at 4.678 MHz with up to 750 {micro}sec pulses at 2Hz. Lasing was established over the entire wavelength range of the mirrors (5.5-6.6 {micro}m). The detuning curve length, turn-on time, and power were in agreement with modeling results assuming a 1 psec FWHM micropulse. The same model predicts over 10 kW of power output with 10 mA of beam and 10% output coupling, which is the ultimate design goal of the IR Upgrade FEL. The behavior of the laser while the dispersion section strength was varied was found to qualitatively match predictions. Initial CW lasing results also will be presented.

  2. Cavity-mirror degradation in the deep-UV FEL

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, K.; Yamazaki, T.; Sei, N. [Electrotechnical Lab., Ibaraki (Japan)] [and others

    1995-12-31

    It is known that the degradation of dielectric multilayer mirrors used in short wavelength free-electron lasers (FELs) is caused by the carbon contamination on the mirror surface and the defects inside the dielectrics. We reported last year that the degraded dielectric multilayer mirrors can be repaired with both surface treatment by RF-induced oxygen plasma and thermal annealing. However, such a mirror degradation is still one of the most critical issues in the deep ultraviolet (UV) FELs, because the fundamental undulator radiation resonating in the laser cavity, the intensity of which is much higher than that of higher harmonics, can be sufficiently energetic to cause the mirror degradation through photochemical reactions. We are investigating the mirror degradation mainly in the deep UV region down to 240 nm. The experimental results will be shown. The mirror degradation mechanism will be discussed.

  3. Photoinjector RF cavity design for high power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Young, L. M. (Lloyd M.); Schultheiss, T. (Thomas); Christina, V.; Rathke, J. (John)

    2002-01-01

    The project is under way to develop a key enabling technology for high-power CW FEL: an RF photoinjector capable of producing continuous average current greater than 100 mA. The specific aim is a 700 MHz pi-mode, normal-conducting RF photoinjector, 3 nC of bunch charge, 100 mA of current (at 33.3-MHz bunch repetition rate) and emittance less than 10 mm-mrad. This level of performance will enable robust 100-kW-class FEL operation with electron beam energy 400 MeV, thereby reducing the size and cost of the FEL. This design is scalable to the MW power level by increasing the electron bunch repetition rate from 33.3 MHz to a higher value. The major challenges are emittance control and high heat flux within the CW 700-MHz RF cavities. Results of RF cavity design and cooling schemes are presented, including both high-velocity water and liquid nitrogen cooling options.

  4. Slippage effect on laser phase error amplification in seeded harmonic generation free-electron lasers

    CERN Document Server

    Feng, Chao; Wang, Guanglei; Wang, Dong; Xiang, Dao; Zhao, Zhentang

    2013-01-01

    Free-electron lasers (FELs) seeded with external lasers hold great promise for generating high power radiation with nearly transform-limited bandwidth in soft x-ray region. However, it has been pointed out that the initial seed laser noise will be amplified by the frequency up-conversion process, which may degrade the quality of the output radiation produced by a harmonic generation scheme. In this paper, theoretical and simulation studies for laser phase error amplification in seeded FEL schemes with slippage effect taken into account are presented. It is found that, the seed laser imperfection experienced by the electron beam can be significantly smoothed by the slippage effect in the modulator when the slippage length is comparable to the laser pulse length. This smoothing effect allows one to preserve the excellent temporal coherence of seeded FELs in presence of large laser phase errors. For ultra-short UV seed lasers with FWHM around 16 fs, the slippage length in a modulator with ~30 undulator periods i...

  5. FEL development at the Budker Institute of Nuclear Physics

    Science.gov (United States)

    Vinokurov, N. A.

    1993-07-01

    There are three different FEL projects at the Budker Institute of Nuclear Physics: 1) the FEL on the VEPP-3 storage ring which operates in the visible and ultraviolet region; 2) the high power FEL using a racetrack microtron recuperator (this machine will provide an average power of about tens of kilowatt in the infrared region); and 3) the compact infrared FEL project, using a microton, and a powerful FEL on a dedicated superconducting storage ring, which is under consideration now.

  6. Fused rock from Köfels, Tyrol

    Science.gov (United States)

    Milton, Daniel J.

    1964-01-01

    The vesicular glass from Köfels, Tyrol, contains grains of quartz that have been partially melted but not dissolved in the matrix glass. This phenomenon has been observed in similar glasses formed by friction along a thrust fault and by meteorite impact, but not in volcanic glasses. The explosion of a small nuclear device buried behind a steep slope produced a geologic structure that is a good small-scale model of that at Köfels. Impact of a large meteorite would have an effect analogous to that of a subsurface nuclear explosion and is the probable cause of the Köfels feature.

  7. The magnetic and diagnostics systems for the Advanced Photon Source self-amplified spontaneously emitting FEL

    CERN Document Server

    Gluskin, E; Dejus, Roger J; Hartog, P K D; Deriy, B N; Makarov, O A; Milton, S V; Moog, E R; Ogurtsov, V I; Trakhtenberg, E; Robinson, K E; Vasserman, I B; Vinokurov, N A; Xu, S

    1999-01-01

    A self-amplified spontaneously emitting (SASE) free-electron laser (FEL) for the visible-to-ultraviolet spectral range is under construction at the Advanced Photon Source at Argonne National Laboratory. The amplifier part of the FEL consists of twelve identical 2.7-m-long sections. Each section includes a 2.4-m-long, 33-mm-period hybrid undulator, a quadrupole lens, and a set of electron beam and radiation diagnostics equipment. The undulators will operate at a fixed magnetic gap (approx. 9.3 mm) with K=3.1. The electron beam position will be monitored using capacitive beam position monitors, YAG scintillators with imaging optics, and secondary emission detectors. The spatial distribution of the photon beam will be monitored by position sensitive detectors equipped with narrow-band filters. A high-resolution spectrograph will be used to observe the spectral distribution of the FEL radiation.

  8. Multi-mode competition in an FEL oscillator at perfect synchronism of an optical cavity

    CERN Document Server

    Dong, Z W; Kii, T; Yamazaki, T; Yoshikawa, K

    2002-01-01

    The sustained saturation in a short pulse free electron laser (FEL) oscillator at perfect synchronism of an optical cavity has been observed recently by Japan Atomic Energy Research Institute (JAERI) FEL group by using their super-conducting linac (Phys. Rev. Lett., in preparation). The experiments have clearly shown that FEL efficiency becomes maximum at perfect synchronism, although it has been considered that only a transient state exists at perfect synchronism due to the lethargy effect. Through careful analyses of the experimental condition of JAERI FEL, we found that, in spite of the short length of the electron micro-bunch, the saturation appears due to the following features, which were different from other FEL experiments: (1) very large ratio of the small signal gain to losses, (2) very long electron macro-bunch which can tolerate a slow start up. The saturation and high efficiency at perfect synchronism were benefited from the contribution of the weak sideband instability. In order to analyse these...

  9. Feasibility Study of a Laser Beat-Wave Seeded THz FEL at the Neptune Laboratory

    CERN Document Server

    Reiche, Sven; Pellegrini, Claudio; Rosenzweig, James E; Shvets, Gennady; Tochitsky, Sergei Ya

    2005-01-01

    Free-Electron Laser in the THz range can be used to generate high output power radiation or to modulate the electron beam longitudinally on the radiation wavelength scale. Microbunching on the scale of 1-5 THz is of particular importance for potential phase-locking of a modulated electron beam to a laser-driven plasma accelerating structure. However the lack of a seeding source for the FEL at this spectral range limits operation to a SASE FEL only, which denies a subpicosecond synchronization of the current modulation or radiation with an external laser source. One possibility to overcome this problem is to seed the FEL with two external laser beams, which difference (beat-wave) frequency is matched to the resonant FEL frequency in the THz range. In this presentation we study feasibility of an experiment on laser beat-wave injection in the THz FEL considered at the UCLA Neptune Laboratory, where both a high brightness photoinjector and a two-wavelength, TW-class CO2 laser system exist. By incorporating the en...

  10. The Shanghai FEL User Facility

    Institute of Scientific and Technical Information of China (English)

    ZhaoXiao-Feng; LuoYing-Xiong; 等

    1998-01-01

    The shanghai FEL User Facility(SFEL) for interdisciplinary studies is based on a rf linear accelerator.the prime goal of SEFL is provide a brodly tunable laser beam from near=IR to far-IR with tens of MW at peak power,A linear accelerator will operate in three modes:-3 MeV moed,20-30MeV mode and 40-50MeV mode.In 20-30 MeV mode,the accelerator consists of a ns grid gun driven at 476MHzm,a 476MHz subharmonic buncher,a 2856 MHz T-W type of buncher with high field gradients,and a SLAC type linac.

  11. Timing Diagnostics and Coherent Harmonics from a test-FEL

    OpenAIRE

    Cutic, Nino

    2011-01-01

    The test free-electron laser (test-FEL) at MAX-lab in Lund demonstrated for the first time circularly polarized coherent femtosecond pulses at 66 nm wavelength. A 375 MeV electron bunch was seeded by a femtosecond laser at 263 nm and coherent harmonics were extracted in an APPLE-II type elliptical undulator. A thermionic gun with a barium oxide cathode was adapted for photocathode operation, and the performance of the gun was tested. Measurements showed the production of 200 pC...

  12. In-pixel conversion with a 10 bit SAR ADC for next generation X-ray FELs

    Energy Technology Data Exchange (ETDEWEB)

    Lodola, L., E-mail: luca.lodola01@universitadipavia.it [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Batignani, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Benkechkache, M.A. [TIFPA INFN, I-38123 Trento (Italy); University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017 Constantine (Algeria); Bettarini, S.; Casarosa, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Comotti, D. [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Dalla Betta, G.F. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); TIFPA INFN, I-38123 Trento (Italy); Fabris, L. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); Forti, F. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Grassi, M. [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Latreche, S. [University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017 Constantine (Algeria); and others

    2016-07-11

    This work presents the design of an interleaved Successive Approximation Register (SAR) ADC, part of the readout channel for the PixFEL detector. The PixFEL project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging for applications at the next generation Free Electron Laser (FEL) facilities. For this purpose, the collaboration is developing the fundamental microelectronic building blocks for the readout channel. This work focuses on the design of the ADC carried out in a 65 nm CMOS technology. To obtain a good tradeoff between power consumption, conversion speed and area occupation, an interleaved SAR ADC architecture was adopted.

  13. In-pixel conversion with a 10 bit SAR ADC for next generation X-ray FELs

    Science.gov (United States)

    Lodola, L.; Batignani, G.; Benkechkache, M. A.; Bettarini, S.; Casarosa, G.; Comotti, D.; Dalla Betta, G. F.; Fabris, L.; Forti, F.; Grassi, M.; Latreche, S.; Malcovati, P.; Manghisoni, M.; Mendicino, R.; Morsani, F.; Paladino, A.; Pancheri, L.; Paoloni, E.; Ratti, L.; Re, V.; Rizzo, G.; Traversi, G.; Vacchi, C.; Verzellesi, G.; Xu, H.

    2016-07-01

    This work presents the design of an interleaved Successive Approximation Register (SAR) ADC, part of the readout channel for the PixFEL detector. The PixFEL project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging for applications at the next generation Free Electron Laser (FEL) facilities. For this purpose, the collaboration is developing the fundamental microelectronic building blocks for the readout channel. This work focuses on the design of the ADC carried out in a 65 nm CMOS technology. To obtain a good tradeoff between power consumption, conversion speed and area occupation, an interleaved SAR ADC architecture was adopted.

  14. Performance of the SASE amplifier of the TEU-FEL project

    NARCIS (Netherlands)

    Ernst, G.J.; Goldstein, J.C.

    1992-01-01

    The free-electron laser of the TEU-FEL project of the University of Twente will be driven by a photoinjector followed by a racetrack microtron. The injector, which is now under construction, will provide a very high-brightness electron beam with an energy of about 6 MeV. In phase I of the project, e

  15. The Gain and Efficiency Enhancement in Double-Undulator Fels Induced Betatron Oscillations

    NARCIS (Netherlands)

    Bazylev, V. A.; Tulupov, A. V.

    1993-01-01

    A new construction of a free-electron laser using induced betatron oscillations to increase the FEL gain or efficiency is proposed. Induced betatron oscillations are driven by an additional space-periodic magnetic field with a period close to that of electron betatron oscillations in an undulator

  16. Nanoplasmonic generation of ultrashort EUV pulses

    Science.gov (United States)

    Choi, Joonhee; Lee, Dong-Hyub; Han, Seunghwoi; Park, In-Yong; Kim, Seungchul; Kim, Seung-Woo

    2012-10-01

    Ultrashort extreme-ultraviolet (EUV) light pulses are an important tool for time-resolved pump-probe spectroscopy to investigate the ultrafast dynamics of electrons in atoms and molecules. Among several methods available to generate ultrashort EUV light pulses, the nonlinear frequency upconversion process of high-harmonic generation (HHG) draws attention as it is capable of producing coherent EUV pulses with precise control of burst timing with respect to the driving near-infrared (NIR) femtosecond laser. In this report, we present and discuss our recent experimental data obtained by the plasmon-driven HHG method that generate EUV radiation by means of plasmonic nano-focusing of NIR femtosecond pulses. For experiment, metallic waveguides having a tapered hole of funnel shape inside were fabricated by adopting the focused-ion-beam process on a micro-cantilever substrate. The plasmonic field formed within the funnelwaveguides being coupled with the incident femtosecond pulse permitted intensity enhancement by a factor of ~350, which creates a hot spot of sub-wavelength size with intensities strong enough for HHG. Experimental results showed that with injection of noble gases into the funnel-waveguides, EUV radiation is generated up to wavelengths of 32 nm and 29.6 nm from Ar and Ne gas atoms, respectively. Further, it was observed that lower-order EUV harmonics are cut off in the HHG spectra by the tiny exit aperture of the funnel-waveguide.

  17. Theoretical research on time-space conversion method for measuring ultra-short electron pulse width%超短电子脉冲的时空转换测量方法理论研究

    Institute of Scientific and Technical Information of China (English)

    吴建军; 袁锡明; 赵宝升; 田进寿; 李军科

    2013-01-01

    分析了超快电子枪处于扫描状态下电子束的传输特性,对飞秒量级的超短电子束脉冲通过偏转扫描系统时的偏转距离等物理量进行了数值计算.计算结果显示:为确保电子束能够顺利通过偏转扫描系统并最后轰击直径为30 mm的荧光屏,必须加一个700~1400 V的初始电压,以便抵消负斜坡扫描电压的作用;700~1400 V的初始电压和负斜坡扫描电压的共同作用,是扫描实验成功的一个前提.扫描实验成功的另一个前提是激发光电阴极的光路和控制扫描的电路之间的同步.讨论了前提一带给同步实验的巨大困难,并设计了一个可以在扫描实验中以较高效率调节光路延时的实验系统,该系统可解决脉宽测量实验中扫描斜坡电压信号和超快电子脉冲的同步难题.%The transmission characteristics of ultra-short electron beams of the ultra-fast electron guns in scanning state were analysed,and the deflection distance of the ultra-short electron beams passing the deflection-scan system was calculated.The results indicate that the initial voltage must be within the range of 700-1400 V to counterbalance the effect of the negative scan slope voltage,ensuring that the electron beams will pass the deflection-scan system and finally hit the phosphor screen of 30 mm in diameter,and the cooperative function of the initial voltage and the negative scan slope voltage is one of the two premises of the scan experiment.The other premise is the synchronization of the electrical and the optical signals.Following the discussion of the great difficulty caused by the first promise,an experimental system that can adjust the optical delay more effectively in the scan experiment was designed,which can facilitate the synchronization of the negative scan slope voltage and the ultra-fast electron pulse.

  18. Analysis of longitudinal bunching in an FEL driven two-beam accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Lidia, S.; Gardelle, J.; Lefevre, T.; Donohue, J.T.; Gouard, P.; Rullier, J.L.; Vermare, C.

    2000-08-01

    Recent experiments have explored the use of a free-electron laser (FEL) as a buncher for a microwave two-beam accelerator, and the subsequent driving of a standing-wave rf output cavity. Here the authors present a deeper analysis of the longitudinal dynamics of the electron bunches as they are transported from the end of the FEL and through the output cavity. In particular, the authors examine the effect of the transport region and cavity aperture to filter the bunched portion of the beam.

  19. 超短电子脉冲展宽的外场依赖性分析%Dependence of Ultra-Short Electron Packet Broadening on External Electric Field

    Institute of Scientific and Technical Information of China (English)

    王超; 田进寿; 康轶凡; 李昊; 刘虎林

    2013-01-01

    Boersch effect of electron pulse broadening was modeled and analyzed, based on the existing results reported in literature. A theory to characterize the electron packet broadening was formulated, with the time dispersion characteristics as the major factor. The influence of the external electric field on the ultra-short electron packet broadening was evaluated,in the newly-developed theory.The results show that the external e-field,accelerating the electrons,suppresses the broadening;whereas the field, decelerating electrons, widens the broadening. In image-converter streak cameras and ultra-fast electron diffraction devices,there exist one non-equipotential and two known equi-potential regions:one situates in the vicinity of photocathode, the other lies behind the deflection plate. Our preliminary results are of much technological interest for design of high-performance electron gun, because significant time broadening originates from the transit of the photoelectron packet in the potential decreasing direction.%根据已有文献研究结果,建立了Boersch效应电子脉冲展宽物理分析模型,确立了以时间弥散特征参量为核心参数的电子脉冲展宽表征理论,以此为基础分析了超短电子脉冲展宽对外场的依赖性.结果表明:相比匀速漂移场,加速场具有较好的抑制电子脉冲展宽作用,而减速场则增大了电子脉冲展宽;对条纹相机和超快电子衍射仪等电子枪系统而言,除了已知的两个区域一光阴极附近和偏转板后等电位漂移空间之外,光电子脉冲从高电位向低电位传输时其时间弥散也是非常显著的.此结论对高性能电子枪工程设计具有重要的理论指导价值.

  20. Two-color infrared FEL facility employing a 250-MeV linac injector of Saga synchrotron light source

    CERN Document Server

    Tomimasu, T; Koga, N; Hashiguchi, Y; Ochiai, Y; Ishibashi, M

    2001-01-01

    A two-color infrared free electron laser (FEL) facility is proposed. This FEL facility will employ a new 250-MeV linac injector of the Saga synchrotron light source (SLS). The linac has two operation modes: short macropulse mode of 1 mu s at 250 MeV is for injection to a 1.4-GeV storage ring and long macropulse mode of 13 mu s at 40 MeV is for the two-color FEL facility. The two-color FEL uses a single electron beam and simultaneously provides both infrared (IR) and far-IR laser pulses for pump-probe studies of quantum-well structures and studying vibrational relaxation of molecules. The Saga SLS will be operated in 2004 to promote material science, bio-medical and industrial applications in Kyushu.

  1. S2E simulation of an ERL-based high-power EUV-FEL source for lithography

    Science.gov (United States)

    Nakamura, N.; Kato, R.; Miyajima, T.; Shimada, M.; Hotei, T.; Hajima, R.

    2017-07-01

    Energy recovery linac (ERL) based extreme ultraviolet (EUV) free electron lasers (FELs) are candidates of a next-generation high-power EUV source for lithography. An ERL-based EUV FEL source has been designed in order to demonstrate the feasibility of generating a 10-kW class EUV power. Start-to-End (S2E) simulation including the injection beam optimization, bunch compression, FEL lasing and bunch decompression is performed for the designed EUV source. As a result it is demonstrated that the EUV FEL can produce high power more than 10 kW at 10 mA and that the electron beam can be well transported throughout the EUV source without beam loss.

  2. Design and Test of Wire-Scanners for SwissFEL

    CERN Document Server

    Orlandi, G L; Brands, H; Heimgartner, P; Ischebeck, R; Kammerer, A; Löhl, F; Lüscher, R; Mohanmurthy, P; Ozkan, C; Schlott, V; Schulz, L; Rippstein, B; Seiler, C; Trovati, S; Valitutti, P; Zimoch, D

    2016-01-01

    The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.8 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be discussed.

  3. Anomalous multiphoton photoelectric effect in ultrashort time scales.

    Science.gov (United States)

    Kupersztych, J; Raynaud, M

    2005-09-30

    In a multiphoton photoelectric process, an electron needs to absorb a given number of photons to escape the surface of a metal. It is shown for the first time that this number is not a constant depending only on the characteristics of the metal and light, but varies with the interaction duration in ultrashort time scales. The phenomenon occurs when electromagnetic energy is transferred, via ultrafast excitation of electron collective modes, to conduction electrons in a duration less than the electron energy damping time. It manifests itself through a dramatic increase of electron production.

  4. Statistical properties of the radiation from SASE FEL operating in a post-saturation regime with and without undulator tapering

    CERN Document Server

    Schneidmiller, E A

    2015-01-01

    We describe statistical and coherence properties of the radiation from x-ray free electron lasers (XFEL) operating in the post-saturation regime. We consider practical case of the SASE3 FEL at the European XFEL. We perform comparison of the main characteristics of the X-ray FEL operating in the post-saturation regime with and without undulator tapering: efficiency, coherence time and degree of transverse coherence.

  5. Characteristics of the Duke/OK-4 storage ring FEL and gamma-ray source

    Science.gov (United States)

    Park, Seong Hee

    The Duke/OK-4 storage ring is a dedicated device for driving a short wavelength Free Electron Laser (FEL). In addition, Compton scattering of the laser light from the circulating electron beam products a semi-monochromatic γ-ray source. The dynamics of such a system including accelerator physics, FEL physics, and Compton backscattering is complex and requires special study, This dissertation is a detailed theoretical and experimental analysis of such a system. The main emphasis of the theory presented here is the self-consistent analysis of the system which incorporates three drastically different processes-the dynamics of an intense electron beam, the free electron laser, and the Compton backscattering. The interdependence of these three processes and the physics of this complex system is discussed in this work. The OK-4/Duke storage ring FEL is the only accelerator facility capable of routine lasing in the deep-UV range and able to generate intense γ-ray beams with energy tunable from 2 MeV to 55 MeV, with energy resolution between 0.5%-1% and with flux up to -5 × 107. The flexibility of this γ-ray source is due to the record-breaking performance of the OK-4/Duke storage ring FEL (lasing from 193.7 nm to 730 nm). Experimental studies determining the parameters of the electron beams, OK-4 FEL beams, and γ-ray beams compare favorably with the theoretical predictions. This study confirms that the electron energy spread induced by FEL lasing is currently the main factor limiting energy resolution. These results provide a solid foundation for future development of the system to obtain more reliable predictions of its performance. A number of useful ``scaling laws'' are also presented here. The results of this work have provided the basis for a number of applications of the OK-4 FEL beam and γ- ray beam that are underway or in the advance planning stage. Future plans include the development and design of a system capable of generating γ-ray beams with an energy

  6. Simulation of FEL pulse length calculation with THz streaking method

    Energy Technology Data Exchange (ETDEWEB)

    Gorgisyan, I., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Ischebeck, R.; Prat, E.; Reiche, S. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Rivkin, L. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Juranić, P., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland)

    2016-04-02

    Simulation of THz streaking of photoelectrons created by X-ray pulses from a free-electron laser and reconstruction of the free-electron laser pulse lengths. Having accurate and comprehensive photon diagnostics for the X-ray pulses delivered by free-electron laser (FEL) facilities is of utmost importance. Along with various parameters of the photon beam (such as photon energy, beam intensity, etc.), the pulse length measurements are particularly useful both for the machine operators to measure the beam parameters and monitor the stability of the machine performance, and for the users carrying out pump–probe experiments at such facilities to better understand their measurement results. One of the most promising pulse length measurement techniques used for photon diagnostics is the THz streak camera which is capable of simultaneously measuring the lengths of the photon pulses and their arrival times with respect to the pump laser. This work presents simulations of a THz streak camera performance. The simulation procedure utilizes FEL pulses with two different photon energies in hard and soft X-ray regions, respectively. It recreates the energy spectra of the photoelectrons produced by the photon pulses and streaks them by a single-cycle THz pulse. Following the pulse-retrieval procedure of the THz streak camera, the lengths were calculated from the streaked spectra. To validate the pulse length calculation procedure, the precision and the accuracy of the method were estimated for streaking configuration corresponding to previously performed experiments. The obtained results show that for the discussed setup the method is capable of measuring FEL pulses with about a femtosecond accuracy and precision.

  7. Ultrafast coherent diffractive imaging of nanoparticles using X-ray free-electron laser radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kassemeyer, Stephan

    2014-05-20

    Coherent diffractive imaging with X-ray free-electron lasers (X-FEL) promises high-resolution structure determination of single microscopic particles without the need for crystallization. The diffraction signal of small samples can be very weak, a difficulty that can not be countered by merely increasing the number of photons because the sample would be damaged by a high absorbed radiation dose. Traditional X-ray crystallography avoids this problem by bringing many sample particles into a periodic arrangement, which amplifies the individual signals while distributing the absorbed dose. Depending on the sample, however, crystallization can be very difficult or even impossible. This thesis presents algorithms for a new imaging approach using X-FEL radiation that works with single, non-crystalline sample particles. X-FELs can deliver X-rays with a peak brilliance many orders of magnitude higher than conventional X-ray sources, compensating for their weak interaction cross sections. At the same time, FELs can produce ultra-short pulses down to a few femtoseconds. In this way it is possible to perform ultra-fast imaging, essentially ''freezing'' the atomic positions in time and terminating the imaging process before the sample is destroyed by the absorbed radiation. This thesis primarily focuses on the three-dimensional reconstruction of single (and not necessarily crystalline) particles using coherent diffractive imaging at X-FELs: in order to extract three-dimensional information from scattering data, two-dimensional diffraction patterns from many different viewing angles must be combined. Therefore, the diffraction signal of many identical sample copies in random orientations is measured. The main result of this work is a globally optimal algorithm that can recover the sample orientations solely based on the diffraction signal, enabling three-dimensional imaging for arbitrary samples. The problem of finding three-dimensional orientations is

  8. Ultrashort-pulse laser calligraphy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Weijia; Kazansky, Peter G. [Optoelectronics Research Centre, University of Southampton, SO17 1BJ (United Kingdom); Shimotsuma, Yasuhiko; Sakakura, Masaaki; Miura, Kiyotaka; Hirao, Kazuyuki [Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8510 (Japan)

    2008-10-27

    Control of structural modifications inside silica glass by changing the front tilt of an ultrashort pulse is demonstrated, achieving a calligraphic style of laser writing. The phenomena of anisotropic bubble formation at the boundary of an irradiated region and modification transition from microscopic bubbles formation to self-assembled form birefringence are observed, and the physical mechanisms are discussed. The results provide the comprehensive evidence that the light beam with centrosymmetric intensity distribution can produce noncentrosymmetric material modifications.

  9. Ultrashort-pulse laser calligraphy

    Science.gov (United States)

    Yang, Weijia; Kazansky, Peter G.; Shimotsuma, Yasuhiko; Sakakura, Masaaki; Miura, Kiyotaka; Hirao, Kazuyuki

    2008-10-01

    Control of structural modifications inside silica glass by changing the front tilt of an ultrashort pulse is demonstrated, achieving a calligraphic style of laser writing. The phenomena of anisotropic bubble formation at the boundary of an irradiated region and modification transition from microscopic bubbles formation to self-assembled form birefringence are observed, and the physical mechanisms are discussed. The results provide the comprehensive evidence that the light beam with centrosymmetric intensity distribution can produce noncentrosymmetric material modifications.

  10. Investigation of 3D effects on FEL operation

    Science.gov (United States)

    van Werkhoven, G. H. C.; Faatz, B.; Schep, T. J.

    1993-07-01

    An investigation is made of 3D effects on FEL operation by comparing the 3D simulation code TDA with a 1 {1}/{2}D model. In the latter model, the full spatial dependence of the radiation field is taken into account, whereas the electrons are treated as moving in a 1D, density-averaged ponderomotive potential. Three dimensional effects like a radial beam profile, emittance and betatron oscillations are investigated. For FELIX parameters, the 1 {1}/{2}D model is in good agreement with TDA.

  11. Development of intense terahertz coherent synchrotron radiation at KU-FEL

    Energy Technology Data Exchange (ETDEWEB)

    Sei, Norihiro, E-mail: sei.n@aist.go.jp [Research Institute for Measurement and Analytical Instrumentation, National Institute of Advanced Industrial Science and Technology, 1-1-1 Umezono, Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Zen, Heishun; Ohgaki, Hideaki [Institute for Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

    2016-10-01

    We produced intense coherent synchrotron radiation (CSR) in the terahertz (THz) region using an S-band linac at the Kyoto University Free Electron Laser (KU-FEL), which is a mid-infrared free-electron laser facility. The CSR beam was emitted from short-pulse electron bunches compressed by a 180° arc, and was transferred to air at a large solid angle of 0.10 rad. The measured CSR energy was 55 μJ per 7 μs macropulse, and KU-FEL was one of the most powerful CSR sources in normal conducting linear accelerator facilities. The CSR spectra were measured using an uncooled pyroelectric detector and a Michelson-type interferometer designed specifically for the KU-FEL electron beam, and had a maximum at a frequency of 0.11 THz. We found that adjusting the energy slit enhanced the CSR energy and shortened the electron beam bunch length in the CSR spectra measurements. Our results demonstrated that the efficient use of the energy slit can help improve the characteristics of CSR. - Highlights: • We have developed intense coherent synchrotron radiation (CSR) at KU-FEL. • The elevation angle of the CSR was correctly measured by a new technique. • The CSR power extracted to the air was 55 μJ per 7 μs macropulse. • It was demonstrated that an energy slit was effective to improve the CSR properties.

  12. PFM2: a 32 × 32 processor for X-ray diffraction imaging at FELs

    Science.gov (United States)

    Manghisoni, M.; Fabris, L.; Re, V.; Traversi, G.; Ratti, L.; Grassi, M.; Lodola, L.; Malcovati, P.; Vacchi, C.; Pancheri, L.; Benkechcache, M. E. A.; Dalla Betta, G.-F.; Xu, H.; Verzellesi, G.; Ronchin, S.; Boscardin, M.; Batignani, G.; Bettarini, S.; Casarosa, G.; Forti, F.; Giorgi, M.; Paladino, A.; Paoloni, E.; Rizzo, G.; Morsani, F.

    2016-11-01

    This work is concerned with the design of a readout chip for application to experiments at the next generation X-ray Free Electron Lasers (FEL). The ASIC, named PixFEL Matrix (PFM2), has been designed in a 65 nm CMOS technology and consists of 32 × 32 pixels. Each cell covers an area of 110 × 110 μm2 and includes a low-noise charge sensitive amplifier (CSA) with dynamic signal compression, a time-variant shaper used to process the preamplifier output signal, a 10-bit successive approximation register (SAR) analog-to-digital converter (ADC) and digital circuitry for channel control and data readout. Two different solutions for the readout channel, based on different versions of the time-variant filter, have been integrated in the chip. Both solutions can be operated in such a way to cope with the high frame rate (exceeding 1 MHz) foreseen for future X-ray FEL machines. The ASIC will be bump bonded to a slim/active edge pixel sensor to form the first demonstrator for the PixFEL X-ray imager. This work has been carried out in the frame of the PixFEL project funded by Istituto Nazionale di Fisica Nucleare (INFN), Italy.

  13. Status report on the development of a high-power UV/IR FEL at CEBAF

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.; Bohn, C.; Dylla, H.F. [Continuous Electron Beam Accelerator Facility, Newport News, VA (United States)] [and others

    1995-12-31

    Last year we presented a design for a kilowatt industrial UV FEL based on a superconducting RF accelerator delivering 5 mA of electron-beam current at 200 MeV with energy recovery to enhance efficiency. Since then, we have progressed toward resolving several issues associated with that design. More exact simulations of the injector have resulted in a more accurate estimate of the injector performance. A new injection method has reduced the longitudinal and transverse emittance at the linac entrance. A more compact lattice has been designed for the UV FEL, and a new recirculation scheme has been identified which greatly increases the threshold for longitudinal instabilities. We decided to use a wiggler from the Advanced Photon Source which leads to a robust high-gain FEL. Analysis of the stability of an RF control system based on CEBAF control modules indicates that only minor modifications will be needed to apply them to this FEL. Detailed magnet specifications, vacuum-chamber beam apertures, and diagnostic specifications have been developed for the recirculation arcs. The design of the optical cavity has been conceptualized, and control systems have been devised to regulate mirror distortion. A half-scale model of one of the end-corner cubes has been built and tested. Finally, three-dimensional simulations have been carried out which indicate that the FEL should exceed its minimum design goals with adequate performance margin.

  14. A project of accelerator-recuperator for Novosibirsk high-power FEL

    Science.gov (United States)

    Bolotin, V. P.; Vinokurov, N. A.; Kayran, D. A.; Knyazev, B. A.; Kolobanov, E. I.; Kotenkov, V. V.; Kubarev, V. V.; Kulipanov, G. N.; Matveenko, A. N.; Medvedev, L. E.; Miginsky, S. V.; Mironenko, L. A.; Oreshkov, A. D.; Ovchar, V. K.; Popik, V. M.; Salikova, T. V.; Serednyakov, S. S.; Skrinsky, A. N.; Tcheskidov, V. G.; Shevchenko, O. A.; Scheglov, M. A.

    2006-12-01

    The first stage of the Novosibirsk high-power free-electron laser (FEL) was commissioned in 2003. It is driven by a CW energy recovery linac. The next step will be the full-scale machine, a four-track accelerator-recuperator based on the same RF accelerating structure. This upgrade will permit to get shorter wavelengths in the infrared region and increase the average power of the FEL by several times. The scheme and some technical details of the project are set out. The installation will be a prototype for future multiturn accelerator-recuperators.

  15. Optimization and Modeling of the Accelerator for the FERMI @ Elettra FEL

    CERN Document Server

    Di Mitri, S; Emma, P; Huang, Z; Wang, D; Wu, J; Zholents, A; Craievich, P

    2005-01-01

    Design studies are in progress to use the existing FERMI@Elettra linear accelerator for a seeded harmonic cascade FEL facility [1]. This accelerator will be upgraded to 1.2 GeV and equipped with a low-emittance RF photocathode gun, laser heater, two bunch compressors, and beam delivery system. We present an optimization study for all the components following the gun, with the aim of achieving high peak current, low energy spread and low emittance electron beam necessary for the FEL. Various operational scenarios are discussed. Results of accelerator simulations including effects of space charge, coherent synchrotron radiation, and wakefields are reported.

  16. Numerical Modeling on Thermal Loading of Diamond Crystal in X-ray FEL Oscillator

    CERN Document Server

    Song, Meiqi; Guo, Yuhang; Li, Kai; Deng, Haixiao

    2015-01-01

    Due to high reflectivity and high resolution to X-ray pulse, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono-chromator in the next generation free electrons lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expanding of diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillator has been systematically studied by the combined simulation of Geant4 and ANSYS, and its dependence on the environment temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented.

  17. An FEL based high-intensity gamma source at the TESLA Test Facility at DESY

    CERN Document Server

    Pagani, C; Schneidmiller, E A; Yurkov, M V

    1999-01-01

    One possible extension of the FEL activity at DESY is connected with the installation of an additional FEL beamline providing tunable UV radiation with peak and average power of 220 GW and 7 kW, respectively. This report presents the feasibility study of a high-intensity, polarized, monochromatic gamma source at the TESLA Test Facility. Gamma quanta are produced in the process of Compton backscattering of the UV FEL radiation on 1 GeV electrons of the TTF accelerator. The ultimate intensity of the gamma source can reach a value up to 10 sup 1 sup 2 gamma quanta per second with a maximum energy of about 100 MeV. The energy resolution of the gamma source can be reduced down to a value of about 0.2%. Potential applications of the intense gamma source at the TESLA Test Facility are discussed as well.

  18. Active FEL-Klystrons As Formers of Femto-Second Clusters of Electromagnetic Field. General Description

    Directory of Open Access Journals (Sweden)

    A.Ju. Brusnik

    2010-01-01

    Full Text Available A qualitative physical and technological substantiation of the creation possibility of a new class of Femto-second Free Electron Lasers (FFELs (active cluster FEL-klystrons is given in the article. The concept of “electromagnetic field” cluster is introduced. Apart from that, the main difference between the concepts “the electromagnetic cluster” and “the radio-pulse” (which is well-known in radio-physics is formulated. The concept of “cluster electromagnetic wave” is also discussed. A general approach to designing the proposed active cluster FEL-klystrons is formulated. The description of a principal design scheme of the active cluster FEL-klystrons and their key technological basis are discussed.

  19. IR-FEL-induced green fluorescence protein (GFP) gene transfer into plant cell

    CERN Document Server

    Awazu, K; Tamiya, E

    2002-01-01

    A Free Electron Laser (FEL) holds potential for various biotechnological applications due to its characteristics such as flexible wavelength tunability, short pulse and high peak power. We could successfully introduce the Green Fluorescent Protein (GFP) gene into tobacco BY2 cells by IR-FEL laser irradiation. The irradiated area of the solution containing BY2 cells and plasmid was about 0.1 mm sup 2. FEL irradiation at a wavelength of 5.75 and 6.1 mu m, targeting absorption by the ester bond of the lipid and the amide I bond of the protein, respectively, was shown to cause the introduction of the fluorescent dye into the cell. On the other hand, transient expression of the GFP fluorescence was only observed after irradiation at 5.75 mu m. The maximum transfer efficiency was about 0.5%.

  20. First Lasing at the ELBE mid-IR FEL

    CERN Document Server

    Michel, Peter

    2004-01-01

    First lasing of the mid infrared FEL at ELBE was achieved on May 7, 2004. The Radiation Source ELBE at the Forschungszentrum Rossendorf in Dresden is currently under transition from commissioning to regular user operation. Presently the electron linac produces an up to 18 MeV, 1 mA (cw) electron beam which is alotted to generate various kinds of secondary radiation. After the successful commissioning of the bremsstrahlung and channeling-X-ray facilities during 2003 stable lasing has now been observed in the IR range (15 to 22 μm). The oscillator FEL is equipped with two planar undulator units, both consisting of 34 hybrid permanent magnet periods of 27.3 mm (Krms = 0.3 - 0.8). The distance between the two parts is variable and the gaps can be adjusted and tapered independently. At 19.6 µm an optical power of 3W was out-coupled in a macro pulse of 0.6 ms duration using an electron beam energy of 16.1 MeV and an energy spread of less than 100 keV; the micropulse charge was 50 pC and its width slightly a...

  1. Transverse C-band deflecting structure for longitudinal electron-bunch-diagnosis in XFEL “SACLA”

    Energy Technology Data Exchange (ETDEWEB)

    Ego, H., E-mail: ego@spring8.or.jp [Japan Synchrotron Radiation Research Institute (JASRI), Kouto, Sayo, Hyogo (Japan); Maesaka, H.; Sakurai, T.; Otake, Y. [RIKEN SPring-8 Center, Kouto, Sayo, Hyogo (Japan); Hashirano, T.; Miura, S. [Mitsubishi Heavy Industries, Ltd. (MHI), Itozaki, Mihara, Hiroshima (Japan)

    2015-09-21

    In the 8 GeV compact X-ray FEL “SACLA,” a single bunch of electrons is compressed to a duration of approximately 30 fs to yield a peak current of 3 kA, which creates brilliant self-amplified spontaneous emission. To measure the longitudinal profile of an ultrashort electron bunch and verify the compression, we developed a high-gradient C-band RF deflecting structure 1.8 m long and periodically loaded with racetrack-shaped irises. The irises generated a high deflection gradient for the vertically deflecting HEM11-5π/6 dipole mode and suppressed rotation of the deflection plane. The two structures were fabricated and generated a stable total deflecting voltage exceeding 60 MV and revealed the longitudinal electron-bunch profile with an effective time resolution of approximately 10 fs.

  2. 3D simulations on output power fluctuation in a short bunch rf-linac FEL

    Science.gov (United States)

    Sentoku, Y.; Furukawa, H.; Mima, K.; Taguchi, T.; Kuruma, S.; Yasuda, H.; Yamanaka, C.; Nakai, S.

    1995-04-01

    A space-time dependent 3D simulation code has been developed in order to analyze the RF-linac FEL oscillator dynamics. Our simulation code employed both the transverse mode spectral method and the longitudinal finite difference method. The electron beam is modeled by a group of super particles which have a density profile in the time domain. In this model the electron beam is able to determine the energy spread and the finite emittance. This simulation code enables us to describe the transverse mode competition and the slippage effects in the resonator cavity. In this paper, a high power infrared FEL with a short bunch electron beam is investigated. The output power fluctuation with cavity desynchronism is simulated with this code. Especially, we investigated the effects of the transverse mode competition, energy spread, and the finite emittance of the electron beam on the output fluctuation. Using FELIX parameters, the FEL oscillator is simulated for 300 passes. The output power oscillates periodically in the case of single transverse mode and not in the case of multi-transverse modes. In a warm beam with multi-transverse modes, the emission is higher than that with a single mode, and the optical pulse shape is almost the after 100 passes. Furthermore, the phase space motion of the laser field is periodic and stable. As a result of the simulation, we recommend that high power infrared FEL operation should include multi-transverse modes in order to get higher emission and a more stable optical pulse.

  3. Commissioning of the accelerator-recuperator for the FEL at the Siberian Center for Photochemical Research.

    Science.gov (United States)

    Antokhin, E I; Akberdin, R R; Bokov, M A; Bolotin, V P; Deichuli, O I; Dementyev, E N; Dubrovin, A N; Dovgenko, B A; Evtushenko, Yu A; Gavrilov, N G; Gorniker, E I; Kairan, D A; Kholopov, M A; Kiselev, O B; Kolmogorov, V V; Kolobanov, E I; Kondakov, A A; Kondakova, N L; Krutikhin, S A; Kubarev, V V; Kulipanov, G N; Kuper, E A; Kuptsov, I V; Kurkin, G Ya; Leontyevskaya, L G; Loskutov, V Yu; Medvedev, L E; Medvedko, A S; Miginsky, S V; Mironenko, L A; Oreshkov, A D; Ovchar, V K; Petrov, S P; Petrov, V M; Popik, V M; Rotov, E A; Salikova, T V; Sedlyarov, I K; Scheglov, M A; Serednyakov, S S; Shevchenko, O A; Shubin, E I; Skrinsky, A N; Tararyshkin, S V; Timoshina, L A; Tribendis, A G; Veremeenko, V F; Vinokurov, N A; Vobly, P D; Zagorodnikov, E I; Zaigrayeva, N S

    2003-09-01

    A 100 MeV eight-turn accelerator-recuperator intended to drive a high-power infrared free-electron laser (FEL) is currently under construction in Novosibirsk. The first stage of the machine includes a one-turn accelerator-recuperator that contains a full-scale RF system. It was commissioned successfully in June 2002.

  4. Properties of the Third Harmonic of the SASE FEL Radiation

    CERN Document Server

    Saldin, E L; Schneidmiller, E

    2005-01-01

    Recent theoretical and experimental studies have shown that SASE FEL with a planar undulator holds a potential for generation of relatively strong coherent radiation at the third harmonic of the fundamental frequency. Here we present detailed study of the nonlinear harmonic generation in SASE FEL obtained with time-dependent FEL simulation code FAST. Using similarity techniques we present universal dependencies for temporal, spectral, and statistical properties of the third harmonic radiation from SASE FEL.

  5. Application of FPGA technology for control of superconducting TESLA cavities in free electron laser

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2006-10-01

    Contemporary fundamental research in physics, biology, chemistry, pharmacology, material technology and other uses frequently methods basing on collision of high energy particles or penetration of matter with ultra-short electromagnetic waves. Kinetic energy of involved particles, considerably greater than GeV, is generated in accelerators of unique construction. The paper presents a digest of working principles of accelerators. There are characterized research methods which use accelerators. A method to stabilize the accelerating EM field in superconducting (SC) resonant cavity was presented. An example was given of usage of TESLA cavities in linear accelerator propelling the FLASH free electron laser (FEL) in DESY, Hamburg. Electronic and photonic control system was debated. The system bases on advanced FPGA circuits and cooperating fast DSP microprocessor chips. Examples of practical solutions were described. Test results of the debated systems in the real-time conditions were given.

  6. Obtaining high degree of circular polarization at X-ray FELs via a reverse undulator taper

    Energy Technology Data Exchange (ETDEWEB)

    Schneidmiller, E.A.; Yurkov, M.V.

    2013-08-15

    Baseline design of a typical X-ray FEL undulator assumes a planar configuration which results in a linear polarization of the FEL radiation. However, many experiments at X-ray FEL user facilities would profit from using a circularly polarized radiation. As a cheap upgrade one can consider an installation of a short helical (or cross-planar) afterburner, but then one should have an efficient method to suppress powerful linearly polarized background from the main undulator. In this paper we propose a new method for such a suppression: an application of the reverse taper in the main undulator. We discover that in a certain range of the taper strength, the density modulation (bunching) at saturation is practically the same as in the case of non-tapered undulator while the power of linearly polarized radiation is suppressed by orders of magnitude. Then strongly modulated electron beam radiates at full power in the afterburner. Considering SASE3 undulator of the European XFEL as a practical example, we demonstrate that soft X-ray radiation pulses with peak power in excess of 100 GW and an ultimately high degree of circular polarization can be produced. The proposed method is rather universal, i.e. it can be used at SASE FELs and seeded (self-seeded) FELs, with any wavelength of interest, in a wide range of electron beam parameters, and with any repetition rate. It can be used at different X-ray FEL facilities, in particular at LCLS after installation of the helical afterburner in the near future.

  7. SOFT X-RAY FEL BY CASCADING STAGES OF HIGH GAIN HARMONIC GENERATION.

    Energy Technology Data Exchange (ETDEWEB)

    YU,L.H.

    2003-04-17

    Short wavelength Free-Electron Lasers are perceived as the next generation of synchrotron light sources. In the past decade, significant advances have been made in the theory and technology of high brightness electron beams and single pass FELs. These developments facilitate the construction of practical VUV FELs and make x-ray FELs possible. Self-Amplified Spontaneous Emission (SASE) and High Gain Harmonic Generation (HGHG)[17-19] are the two leading candidates for x-ray FELs. The first lasing of HGHG proof-of-principle experiment succeeded in August, 1999 in Brookhaven National Laboratory. The experimental results agree with the theory prediction. Compared with SASE FEL, the following advantages of HGHG FEL were confirmed; (1) Better longitudinal coherence, and hence, much narrower bandwidth than SASE. (2) More stable central wavelength, (3) More stable output energy. In this introduction, we will first briefly describe the principle of HGHG in Section A. Then in Section B, we give a general description about how to produce soft x-ray by cascading HGHG scheme. In section 2, we give a detailed description of the system design. Then, in section 3, we give a description of an analytical estimate for the HGHG process, and the calculation of the parameters of different parts of the system. The estimate is found to agree with simulation within about a factor 2 for most cases we studied. The stability issue, the sensitivity to parameter variation, the harmonic contents of the final output, and the noise degradation issue of such HGHG scheme are discussed in Section 4. The results are presented in Section 4. Finally, in Section 5, we will give some discussion of the challenges in development of the system. The conclusion is given in Section 6.

  8. Synchronization and Characterization of an Ultra-Short Laser for Photoemission and Electron-Beam Diagnostics Studies at a Radio Frequency Photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Timothy; Ruan, Jinhao; Piot, Philippe; Lumpkin, Alex

    2012-03-01

    A commercially-available titanium-sapphire laser system has recently been installed at the Fermilab A0 photoinjector laboratory in support of photoemission and electron beam diagnostics studies. The laser system is synchronized to both the 1.3-GHz master oscillator and a 1-Hz signal use to trigger the radiofrequency system and instrumentation acquisition. The synchronization scheme and performance are detailed. Long-term temporal and intensity drifts are identified and actively suppressed to within 1 ps and 1.5%, respectively. Measurement and optimization of the laser's temporal profile are accomplished using frequency-resolved optical gating.

  9. Synchronization and Characterization of an Ultra-Short Laser for Photoemission and Electron-Beam Diagnostics Studies at a Radio Frequency Photoinjector

    CERN Document Server

    Maxwell, Timothy; Piot, Philippe; Lumpkin, Alex

    2012-01-01

    A commercially-available titanium-sapphire laser system has recently been installed at the Fermilab A0 photoinjector laboratory in support of photoemission and electron beam diagnostics studies. The laser system is synchronized to both the 1.3-GHz master oscillator and a 1-Hz signal use to trigger the radiofrequency system and instrumentation acquisition. The synchronization scheme and performance are detailed. Long-term temporal and intensity drifts are identified and actively suppressed to within 1 ps and 1.5%, respectively. Measurement and optimization of the laser's temporal profile are accomplished using frequency-resolved optical gating.

  10. Timing jitter studies of the SwissFEL Test Injector drive laser

    Energy Technology Data Exchange (ETDEWEB)

    Csatari Divall, Marta, E-mail: marta.divall@psi.ch [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Kaiser, Maik; Hunziker, Stephan; Vicario, Carlo; Beutner, Bolko; Schietinger, Thomas; Lüthi, Matthias; Pedrozzi, Marco [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Hauri, Christoph P. [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Ecole Polytechnique Federale de Lausanne, 1015 Lausanne (Switzerland)

    2014-01-21

    To produce short X-ray pulses for SwissFEL, it is necessary to compress the electron bunches by a factor of 300, down to sub-fs for the attosecond operational modes. To achieve stable FEL output accurate timing of the initial electron injection at the main linear accelerator is necessary. Tolerance studies show, that to reach the final performance goals, less than 40 fs relative rms jitter is required from the electron gun, relative to the reference. Here we present independent residual RF phase noise measurements of the laser oscillators, showing an exceptional ∼30 fs integrated rms jitter. Moreover timing studies at the SwissFEL Injector Test Facility, based on charge detection at the sharp rising edge of the Schottky-scan were performed allowing for systematic correlation studies and showing a residual jitter of ∼150 fs at 10 Hz from the pulsed laser system and beam transport respect to the reference. For future development, available relative jitter measurement techniques for pulsed laser systems will be reviewed and their applicability for laser arrival time monitoring and feedback for FEL applications will be discussed.

  11. Design and optimization of the grating monochromator for soft X-ray self-seeding FELs

    Energy Technology Data Exchange (ETDEWEB)

    Serkez, Svitozar

    2015-10-15

    The emergence of Free Electron Lasers (FEL) as a fourth generation of light sources is a breakthrough. FELs operating in the X-ray range (XFEL) allow one to carry out completely new experiments that probably most of the natural sciences would benefit. Self-amplified spontaneous emission (SASE) is the baseline FEL operation mode: the radiation pulse starts as a spontaneous emission from the electron bunch and is being amplified during an FEL process until it reaches saturation. The SASE FEL radiation usually has poor properties in terms of a spectral bandwidth or, on the other side, longitudinal coherence. Self-seeding is a promising approach to narrow the SASE bandwidth of XFELs significantly in order to produce nearly transformlimited pulses. It is achieved by the radiation pulse monochromatization in the middle of an FEL amplification process. Following the successful demonstration of the self-seeding setup in the hard X-ray range at the LCLS, there is a need for a self-seeding extension into the soft X-ray range. Here a numerical method to simulate the soft X-ray self seeding (SXRSS) monochromator performance is presented. It allows one to perform start-to-end self-seeded FEL simulations along with (in our case) GENESIS simulation code. Based on this method, the performance of the LCLS self-seeded operation was simulated showing a good agreement with an experiment. Also the SXRSS monochromator design developed in SLAC was adapted for the SASE3 type undulator beamline at the European XFEL. The optical system was studied using Gaussian beam optics, wave optics propagation method and ray tracing to evaluate the performance of the monochromator itself. Wave optics analysis takes into account the actual beam wavefront of the radiation from the coherent FEL source, third order aberrations and height errors from each optical element. The monochromator design is based on a toroidal VLS grating working at a fixed incidence angle mounting without both entrance and exit

  12. Users program for storage-ring based FEL and synchrotron sources of the Duke FEL Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Straub, K.D.; Barnett, G.; Burnham, B. [and others

    1995-12-31

    The storage ring at the Duke FEL Laboratory was first operated with a stored e-beam in November, 1994. It has now achieved operation energies in excess 1 GeV with more than 100 mA current at 280 MeV. The ring has several ports for FEL and synchrotron light source research. The circulating ring current can be synchronized with the seperate Mark III FEL operating in the 2-9.5 {mu}m IR region. This allows low optical jitter (10-20 ps) between the two sources and thus pump-probe operation. The ring has been configured to drive a number of light sources including the OK-4 FEL system capable of FEL operation between 400 and 65 nm, an inverse Compton scattering source using this undulator which will yield 4-200 MeV gammas, an undulator source at approximately 40 {angstrom} (not an FEL), a mm FEL with inverse compton scattering providing 1-100 keV x-rays and two synchrotron ports from the bend magnets for which the {lambda}{sub c} = 11-12 {angstrom} for 1 GeV. The broadly tunable FEL sources and their associated inverse compton scattering are extremely bright. The initial research proposals, submitted to the Laboratory emphasizes photoelectron spectroscopy, PEEM, high resolution vacuum UV of gases, solid spectroscopy and photochemistry in the UV, X-ray microprobe studies, X-ray microscopy, X-ray holography, X-ray crystallography, Mossbauer spectroscopy, nuclear spectroscopy, neutron production, photon activation therapy and broadband synchrotron as a probe of fast reaction in the IR and near IR.

  13. Multiscale degradations of storage ring FEL optics

    CERN Document Server

    Gatto, A; Amra, C; Boccara, C; Couprie, Marie Emmanuelle; De Ninno, G; Feigl, T; Garzella, D; Grewe, M; Kaiser, N; Marsi, M; Paoloni, S; Reita, V; Roger, J P; Torchio, P; Trovò, M; Walker, R; Wille, K

    2002-01-01

    The advanced understanding of the complete degradation phenomena is crucial in order to develop robust optics for FEL. Under very harsh Synchrotron Radiation conditions, results show that multiscale wavelength damages could be observed, inducing local crystalline structure modifications of the high optical index material with a severe increase of the surface roughness.

  14. Start-To-End Simulations of the Energy Recovery Linac Prototype FEL

    CERN Document Server

    Gerth, Christopher; Muratori, Bruno; Owen, Hywel; Thompson, Neil R

    2004-01-01

    Daresbury Laboratory is currently building an Energy Recovery Linac Prototype (ERLP) that serves as a testbed for the study of beam dynamics and accelerator technology important for the design and construction of the proposed 4th Generation Light Source (4GLS) project. Two major objectives for the ERLP are the operation of an oscillator infra-red FEL and demonstration of energy recovery from an electron bunch with an energy spread induced by the FEL. In this paper we present start-to-end simulations including the FEL of the ERLP. The beam dynamics in the high-brightness injector, which consists of a DC photocathode gun and a super-conducting booster, have been modelled using the particle tracking code ASTRA. After the main linac, in which the particles are accelerated to 35 MeV, particles have been tracked with the code ELEGANT. The 3D code GENESIS was used to model the FEL interaction with the electron beam. Different modes of operation and their impact on the design of the ERLP are discussed.

  15. A proposed VUV oscillator-based FEL upgrade at Jefferson Lab

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S. V. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Douglas, D. R. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Evtushenko, P. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Hannon, F. E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Hernandez-Garcia, C. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. M. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Legg, R. A. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Neil, G. R. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Shinn, M. D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tennant, C. D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Zhang, S. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Williams, G. P. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2011-09-20

    Advances in superconducting linac technology offer the possibility of an upgrade of the Jefferson Lab Free Electron Laser (JLab FEL) facility to an oscillator-based VUV-FEL that would produce 6 x 10{sup 12} coherent 100 eV photons per pulse at multi-MHz repetition rates in the fundamental. At present JLab operates a pair of oscillator-based continuous-wave Free Electron Lasers (FELs) as a linac-based next generation light source in the IR and UV, with sub-picosecond pulses up to 75 MHz. Harmonics upwards of 10 eV are produced and the fully coherent nature of the source results in peak and average brightness values that are several orders of magnitude higher than storage rings. The accelerator uses an energy recovered linac design for efficiency of operation. New style superconducting linac cryomodules with higher gradient, combined with a new injector and beam transport system allow the development of the FEL to higher photon energies.

  16. Availability Performance and Considerations for LCLS X-Ray FEL at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Allen, W.B.; Brachmann, A.; Colocho, W.; Stanek, M.; Warren, J.; /SLAC

    2011-08-16

    The Linac Coherent Light Source (LCLS) is an X-ray Free Electron Laser (FEL) facility located at the SLAC National Accelerator Laboratory. LCLS has been in operation since spring 2009, and it has completed its 3rd user run. LCLS is the first in its class of X-ray FEL user facilities, and presents different availability challenges compared to storage ring light sources. This paper presents recent availability performance of the FEL as well as factors to consider when defining the operational availability figure of merit for user runs. During LCLS [1] user runs, an availability of 95% has been set as a goal. In run III, LCLS photon and electron beam systems achieved availabilities of 94.8% and 96.7%, respectively. The total availability goal can be distributed among subsystems to track performance and identify areas that need attention in order to maintain and improve hardware reliability and operational availability. Careful beam time accounting is needed to understand the distribution of down time. The LCLS complex includes multiple experimental hutches for X-ray science, and each user program has different requirements of a set of parameters that the FEL can be configured to deliver. Since each user may have different criteria for what is considered 'acceptable beam', the quality of the beam must be considered to determine the X-ray beam availability.

  17. Parameter Analysis For A High-Gain Harmonic Generation FEL By Numerical Calculation Based On 1D Theory

    CERN Document Server

    Li, Yuhui; Zhang, Shancai

    2004-01-01

    The high-gain harmonic generation (HGHG) free-electron laser (FEL) is an important candidate for a fourth-generation light source. Lots of theoretical work has been performed. Recently a further 1D theory about HGHG FEL has been developed. It considers the effects of different parameters for the whole process. An initial program based on this theory has been made. In this paper, a brief comparison of the results from this 1D program and from TDA (3D code) is discussed. It also analyses the parameters for Shanghai deep ultra violate free-electron laser source (SDUV-FEL), including electron beam energy spread, seed laser power, strength of dispersion section etc.

  18. The FERMI free-electron lasers.

    Science.gov (United States)

    Allaria, E; Badano, L; Bassanese, S; Capotondi, F; Castronovo, D; Cinquegrana, P; Danailov, M B; D'Auria, G; Demidovich, A; De Monte, R; De Ninno, G; Di Mitri, S; Diviacco, B; Fawley, W M; Ferianis, M; Ferrari, E; Gaio, G; Gauthier, D; Giannessi, L; Iazzourene, F; Kurdi, G; Mahne, N; Nikolov, I; Parmigiani, F; Penco, G; Raimondi, L; Rebernik, P; Rossi, F; Roussel, E; Scafuri, C; Serpico, C; Sigalotti, P; Spezzani, C; Svandrlik, M; Svetina, C; Trovó, M; Veronese, M; Zangrando, D; Zangrando, M

    2015-05-01

    FERMI is a seeded free-electron laser (FEL) facility located at the Elettra laboratory in Trieste, Italy, and is now in user operation with its first FEL line, FEL-1, covering the wavelength range between 100 and 20 nm. The second FEL line, FEL-2, a high-gain harmonic generation double-stage cascade covering the wavelength range 20-4 nm, has also completed commissioning and the first user call has been recently opened. An overview of the typical operating modes of the facility is presented.

  19. Harmonic Operation of the SDUV HGHG-FEL

    CERN Document Server

    Dai, Z M; Xu, Y; Zhao, X F; Zhao, Z

    2005-01-01

    In this paper, we study the harmonic operation of the SDUV HGHG-FEL (Phase-I), which consists of 160MeV linac, and two undulators separated by a dispersion section. A laser light at 352nm is injected into the first undulator to modulate the energy of the electron beam. This is followed by a dispersion section to produce spatial bunching at 352nm, and a second undulator which fundamental is resonant to 264nm and 3rd harmonic is resonant to 88nm. Upon passing through the second undulator, the prebunched electron beam first radiates coherently at 88nm (i.e., the 3rd harmonic of the second undulator which is integer times of the seeding laser), and then this radiation is exponentially amplified, while the fundamental of the second undulator is allowed to grow from noise. Under proper condition, the output power of the 3rd harmonic may be much higher than that of the fundamental.

  20. Dynamical aspects on FEL interaction in single passage and storage ring devices

    Energy Technology Data Exchange (ETDEWEB)

    Dattoli, G.; Renieri, A. [ENEA, Frascati (Italy)

    1995-12-31

    The dynamical behaviour of the free-electron lasers is investigated using appropriate scaling relations valid for devices operating in the low and high gain regimes, including saturation. The analysis is applied to both single passage and storage ring configurations. In the latter case the interplay between the interaction of the electron bean with the laser field and with the accelerator environment is investigated. In particular we discuss the effect of FEL interaction on the microwave instability.

  1. A broadly tunable autocorrelator for ultra-short, ultra-high power infrared optical pulses

    Energy Technology Data Exchange (ETDEWEB)

    Szarmes, E.B.; Madey, J.M.J. [Duke Univ., Durham, NC (United States)

    1995-12-31

    We describe the design of a crossed-beam, optical autocorrelator that uses an uncoated, birefringent beamsplitter to split a linearly polarized incident pulse into two orthogonally polarized pulses, and a Type II, SHG crystal to generate the intensity autocorrelation function. The uncoated beamsplitter accommodates extremely broad tunability while precluding any temporal distortion of ultrashort optical pulses at the dielectric interface, and the specific design provides efficient operation between 1 {mu}m and 4 {mu}m. Furthermore, the use of Type II SHG completely eliminates any single-beam doubling, so the autocorrelator can be operated at very shallow crossed-beam angles without generating a background pedestal. The autocorrelator has been constructed and installed in the Mark III laboratory at Duke University as a broadband diagnostic for ongoing compression experiments on the chirped-pulse FEL.

  2. Comment to the paper: 'Seeded quantum FEL at 478 keV' AIP Conf. Proc. 'Light at Extreme Intensities' 1462 173-176 (2012)'

    CERN Document Server

    Petrillo, Vittoria

    2012-01-01

    We criticize the thesis exposed the paper 'Seeded quantum FEL at 478 keV' AIP Conf. Proc. 'Light at Extreme Intensities,' 1462 173-176 (2012), which presents the possibility of producing gamma rays at 478 KeV by means of a seeded quantum FEL driven by an electron beam at 125 MeV, current I=40 A, interacting with an infrared laser. We show that, in the case analyzed, the FEL Pierce parameter has a value two orders of magnitude less than what claimed in the paper in question, overturning the conclusions of the analysis.

  3. Characteristics of the FEL project for the MUH experiment; Stato del progetto FEL per l`esperimeto MUH

    Energy Technology Data Exchange (ETDEWEB)

    Ciocci, F.; Doria, A.; Fascetti, M.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Picardi, L.; Renieri, A.; Ronci, G.; Ronsivalle, C.; Vignati, A. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione

    1999-01-01

    The design characteristics of a compact Free Electron Laser (FEL) operating in the far infrared spectral range between 200 and 600 {mu}m are presented in this report. The device can be employed in a fundamental physics experiment to be performed in collaboration with INFN-Trieste and the Paul Sherrer Institute- Villigen. Spectroscopic measurements in the above spectral region will allow one to determine the energy difference between the levels 3D-3P in the {mu}P system with great accuracy. [Italiano] In questo rapporto vengono presentate le caratteristiche di progetto di un Laser ad Elettroni Liberi (FEL) compatto operante nel lontano infrarosso a lunghezze d`onda comprese tra 200 e 600 {mu}m. Tale laser potra` essere impiegato in un esperimento di fisica fondamentale su idrogeno muonico in collaborazione con INFN-Trieste ed il Paul Sherrer Institute-Villigen. Le misure spettroscopiche nella regione spettrale del lontano infrarosso consentiranno di determinare con grande accuratezza la differenza di energia dei livelli 3D-3P nel sistema {mu}P. Attraverso la misura di questa transizione sara` possibile effettuare un test delle correzioni di Meccanica Quantistica (QED) alle energie di legame, migliorando di un ordine di grandezza l`accuratezza della misura della polarizzazione del vuoto.

  4. Performance of a Combined System Using an X-Ray FEL Oscillator and a High-Gain FEL Amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, L.; Lindberg, R.; Kim, K. -J.

    2016-10-01

    The LCLS-II at SLAC will feature a 4 GeV CW superconducting (SC) RF linac [1] that can potentially drive a 5th harmonic X-Ray FEL Oscillator (XFELO) to produce fully coherent, 1 MW photon pulses with a 5 meV bandwidth at 14.4 keV [2]. The XFELO output can serve as the input seed signal for a high-gain FEL amplifier employing fs electron beams from the normal conducting SLAC linac, thereby generating coherent, fs x-ray pulses with TW peak powers using a tapered undulator after saturation [3]. Coherent, intense output at several tens of keV will also be feasible if one considers a harmonic generation scheme. Thus, one can potentially reach the 42 keV photon energy required for the MaRIE project [4] by beginning with an XFELO operating at the 3rd harmonic to produce 14.0 keV photons using a 12 GeV SCRF linac, and then subsequently using the high-gain harmonic generation scheme to generate and amplify the 3th harmonic at 42 keV [5]. We report extensive GINGER simulations that determine an optimized parameter set for the combined system.

  5. The role of radiation reaction in Lienard-Wiechert description of FEL interaction

    Energy Technology Data Exchange (ETDEWEB)

    Kimel, I.; Elias, L.R. [Univ. of Central Florida, Orlando, FL (United States)

    1995-12-31

    The most common theoretical analysis of the FEL interaction is based on the set of equations consisting of Lorentz and wave equations. This approach explains most of FEL features and, in particular, works well to describe operation in the amplifier mode. In that approach however, there are some difficulties in describing operation in oscillator mode, as well as self amplified spontaneous emission. In particular, it is not possible to describe the start up stage since there is no wave to start with. It is clear that a different approach is required in such situations. That is why we have pursued the study of the FEL interaction in the framework of Lorentz plus Lienard-Wiechert equations. The Lienard-Wiechert Lorentz equation approach however, presents its own set of problems. Variation in energy of the electrons is given exclusively by the Lorentz equation. Thus, the energy lost due to the radiation process is not properly taken into account. This, of course, is a long standing problem in classical electrodynamics. In order to restore energy conservation radiation reaction has to be incorporated into the framework. The first question in that regard has to do with which form of the radiation reaction equations is the most convenient for computations in the FEL process. This has to do with the fact that historically, radiation reaction has been added in an ad hoc manner instead of being derived from the fundamental equations. Another problem discussed is how to take into account the radiation reaction in a collective manner in the interaction among electrons. Also discussed is the radiation reaction vis a vi the coherence properties of the FEL process.

  6. A helical optical for circular polarized UV-FEL project at the UVSOR

    Energy Technology Data Exchange (ETDEWEB)

    Hama, Hiroyuki [Institute for Molecular Science, Okazaki (Japan)

    1995-12-31

    Most of existing storage ring free electron lasers (SRFEL) are restricted those performances by degradation of mirrors in optical cavities. In general, the SRFEL gain at the short wavelength region with high energy electrons is quite low, and the high reflectivity mirrors such as dielectric multilayer mirrors are therefore required. The mirror degradation is considered as a result of irradiation of higher harmonic photons that are simultaneously emitted from planar optical klystron (OK) type undulators, which are commonly used in SRFEL. This problem is getting severer as the lasing wavelength becomes shorter. The UVSOR-FEL had been originally scheduled to be shutdown by 1996 because another undulator project for spectroscopic studies with circular polarized photon would take the FEL`s place. According to suggestion of the insertion device group of the SPring-8, we have designed a helical undulator that is able to vary degree and direction of the polarization easily. In addition, the undulator can be converted into a helical OK by replacing magnets at the center part of undulator in order to coexist with further FEL experiments. Using a calculated magnetic field for magnet configurations of the OK mode, the radiation spectrum at wide wavelength range was simulated by a Fourier transform of Lienard-Wiechert potentials. As a matter of course, some higher harmonics are radiated on the off-axis angle. However it was found out that the higher harmonics is almost negligible as far as inside a solid angle of the Gaussian laser mode. Moreover the gain at the UV region of 250 nm is expected to be much higher than our present FEL because of high brilliant fundamental radiation. The calculated spatial distribution of higher harmonics and the estimated instantaneous gain is presented. Advantages of the helical OK for SRFEL will be discussed in view of our experience, and a possibility of application two-color experiment with SR will be also mentioned.

  7. Active FEL-Klystrons as Formers of Femto-Second Clusters of Electromagnetic Field. Description of Models on the Basis of Sections of ‘Ordinary’ FEL’: Analisys

    Directory of Open Access Journals (Sweden)

    V.V. Kulish

    2011-01-01

    Full Text Available Physical processes of ultrashort electromagnetic cluster formation in multiharmonic parametrical free electron lasers are analyzed. The conditions, which are necessary for formation of such clusters, are found out. Two formation variants, which differ with input electromagnetic signal spectra and multiharmonic pumping magnetic field spectra, are studied. Possibility of the ultrashort electromagnetic field cluster formation in the multiharmonic parametrical free electron lasers is shown.

  8. Experimental setups for FEL-based four-wave mixing experiments at FERMI

    Energy Technology Data Exchange (ETDEWEB)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs–nm time–length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  9. Experimental setups for FEL-based four-wave mixing experiments at FERMI.

    Science.gov (United States)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs-nm time-length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  10. Experimental setups for FEL-based four-wave mixing experiments at FERMI

    Energy Technology Data Exchange (ETDEWEB)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs–nm time–length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  11. Deposition of robust multilayer mirror coatings for storage ring FEL lasing at 176nm

    Science.gov (United States)

    Günster, St.; Ristau, D.; Trovó, M.; Danailov, M.; Gatto, A.; Kaiser, N.; Sarto, F.; Piegari, A.

    2005-09-01

    Progress was achieved in the last years in the development of multilayer mirrors used in storage ring Free Electron Lasers (FEL) operating in the vacuum ultraviolet spectral range. Based on dense oxide coatings deposited by Ion Beam Sputtering, a stable lasing at 190 nm was demonstrated. The extension towards shorter wavelengths had to overcome severe problems connected to the radiation resistance and the necessary reflectivity of the resonator mirrors. In this context, radiation resistance can be considered as the ability of the mirror materials to withstand the high power laser radiation and the intense energetic background radiation generated in the synchrotron source. The bombardment with high energetic photons leads to irreversible changes and a coloration on the specimen. Reflectivity requirements can be evaluated from the tolerable losses of FEL systems. At ELETTRA FEL the resonator mirror reflectivity must be above 95 %. Evaporated fluoride multilayer mirrors provide sufficient reflectivity, but they do not exhibit an adequate radiation resistance. Pure oxide multilayers show a sufficient radiation resistance, but they cannot reach the necessary reflectivity below 190 nm. A successful approach combines evaporated fluoride multilayer stack with a dense protection layer of silicon dioxide deposited by Ion Beam Sputtering. Such mirror systems were produced reaching a reflectivity of approximately 99 % at 180 nm. Lasing in the storage ring FEL at ELETTRA was realised in the range between 176 - 179 nm. The mirror reflectivity shows only a slight degradation after lasing, which could be fully restored after the lasing experiment.

  12. Numerical modeling of thermal loading of diamond crystal in X-ray FEL oscillators

    Science.gov (United States)

    Song, Mei-Qi; Zhang, Qing-Min; Guo, Yu-Hang; Li, Kai; Deng, Hai-Xiao

    2016-04-01

    Due to high reflectivity and high resolution of X-ray pulses, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono-chromator in the next generation of free electron lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expansion of the diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillators has been systematically studied by combined simulation with Geant4 and ANSYS, and its dependence on the environmental temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented. Our results show that taking the thermal loading effects into account, X-ray FEL oscillators are still robust and promising with an optimized design. Supported by National Natural Science Foundation of China (11175240, 11205234, 11322550) and Program for Changjiang Scholars and Innovative Research Team in University (IRT1280)

  13. Generation of a few femtoseconds pulses in seeded FELs using a seed laser with small transverse size

    Science.gov (United States)

    Li, Heting; Jia, Qika

    2016-09-01

    We propose a simple method to generate a few femtosecond pulses in seeded FELs. We use a longitudinal energy-chirped electron beam passing through a dogleg where transverse dispersion will generate a horizontal energy chirp, then in the modulator, a seed laser with narrow beam radius will only modulate the center portion of the electron beam and then short pulses at high harmonics will be generated in the radiator. Using a representative realistic set of parameters, we show that 30 nm XUV pulse based on the HGHG scheme and 9 nm soft x-ray pulse based on the EEHG scheme with duration of about 8 fs (FWHM) and peak power of GW level can be generated from a 180 nm UV seed laser with beam waist of 75 μm. This new scheme can provide an optional operation mode for the existing seeded FEL facilities to meet the requirement of short-pulse FEL.

  14. Photoelectron sidebands induced by a chirped laser field for shot-by-shot temporal characterization of FEL pulses

    Science.gov (United States)

    Liu, Chien-Nan; Morishita, Toru; Fushitani, Mizuho; Hishikawa, Akiyoshi

    2016-02-01

    We theoretically investigate the laser-assisted photoionization of He by an extreme ultra violet (XUV) pulse in the presence of a linearly chirped intense laser pulse by solving the time-dependent Schrödinger equation within the single-active-electron approximation. Analysis based on the time-dependent perturbation theory is also carried out to provide more physical insights. A new scheme is shown to be capable of extracting the arrival time of an XUV free-electron laser (FEL) pulse relative to an external laser pulse as well as the XUV pulse duration from the photoelectron sidebands resulting from XUV ionization in the presence of a chirped laser pulse. This scheme is independent of the energy fluctuation and the timing jittering of the FEL pulse. Therefore it can be implemented in a non-invasive way to characterize FEL pulses on a shot-by-shot basis in time-resolved spectroscopy.

  15. The BESSY Soft X-Ray FEL User Facility

    CERN Document Server

    Kraemer, Dieter

    2005-01-01

    The user requests for an optimized 2nd generation FEL facility in the VUV to soft X-ray range demand for ultra short photon pulses (t = 20 fs) at a peak power of several GW. A high shot to shot reproducibility of the pulse shape and pulse power allowing for fs-synchronization for pump-probe experiments is feasible in a seeded FEL approach. Free selectable photon polarization and wavelength tuning is essential for any 2nd generation FEL source like the proposed BESSY-Soft X-ray FEL user facility. Freely selectable pulse repetition rates and freely selectable pulse patterns, including fast switching to different parallel operating FEL-Lines are necessary ingredients, feasible with a suitable injector in combination with a CW-superconducting linac. The status of the BESSY HGHG-FEL project will be reviewed.

  16. Development of intense terahertz coherent synchrotron radiation at KU-FEL

    Science.gov (United States)

    Sei, Norihiro; Zen, Heishun; Ohgaki, Hideaki

    2016-10-01

    We produced intense coherent synchrotron radiation (CSR) in the terahertz (THz) region using an S-band linac at the Kyoto University Free Electron Laser (KU-FEL), which is a mid-infrared free-electron laser facility. The CSR beam was emitted from short-pulse electron bunches compressed by a 180° arc, and was transferred to air at a large solid angle of 0.10 rad. The measured CSR energy was 55 μJ per 7 μs macropulse, and KU-FEL was one of the most powerful CSR sources in normal conducting linear accelerator facilities. The CSR spectra were measured using an uncooled pyroelectric detector and a Michelson-type interferometer designed specifically for the KU-FEL electron beam, and had a maximum at a frequency of 0.11 THz. We found that adjusting the energy slit enhanced the CSR energy and shortened the electron beam bunch length in the CSR spectra measurements. Our results demonstrated that the efficient use of the energy slit can help improve the characteristics of CSR.

  17. Free electron laser for gamma-gamma collider at TESLA

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2000-01-01

    The present paper contains the results of optimization of the free electron laser for the gamma-gamma collider at TESLA. A superconducting linear accelerator, similar to the TESLA test facility (TTF) accelerator, produces a driving electron beam for the FEL. The MOPA FEL scheme is studied when the radiation from a master oscillator is amplified in the FEL amplifier with tapered undulator. The FEL produces the radiation of TW level with a wavelength of 1 mu m. Optimization of the FEL amplifier is performed with three-dimensional, time-dependent simulation code FAST.

  18. PixFEL: developing a fine pitch, fast 2D X-ray imager for the next generation X-FELs

    Science.gov (United States)

    Ratti, L.; Comotti, D.; Fabris, L.; Grassi, M.; Lodola, L.; Malcovati, P.; Manghisoni, M.; Re, V.; Traversi, G.; Vacchi, C.; Bettarini, S.; Casarosa, G.; Forti, F.; Morsani, F.; Paladino, A.; Paoloni, E.; Rizzo, G.; Benkechkache, M. A.; Dalla Betta, G.-F.; Mendicino, R.; Pancheri, L.; Verzellesi, G.; Xu, H.

    2015-10-01

    The PixFEL project is conceived as the first stage of a long term research program aiming at the development of advanced X-ray imaging instrumentation for applications at the free electron laser (FEL) facilities. The project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging by exploring cutting-edge solutions for sensor development, for integration processes and for readout channel architectures. The main focus is on the development of the fundamental microelectronic building blocks for detector readout and on the technologies for the assembly of a multilayer module with minimum dead area. This work serves the purpose of introducing the main features of the project, together with the simulation results leading to the first prototyping run.

  19. Two-Colour Free Electron Laser with Wide Frequency Separation using a Single Monoenergetic Electron Beam

    CERN Document Server

    Campbell, L T; Reiche, S

    2014-01-01

    Studies of a broad bandwidth, two-colour FEL amplifier using one monoenergetic electron beam are presented. The two-colour FEL interaction is achieved using a series of undulator modules alternately tuned to two well-separated resonant frequencies. Using the broad bandwidth FEL simulation code Puffin, the electron beam is shown to bunch strongly and simultaneously at the two resonant frequencies. Electron bunching components are also generated at the sum and difference of the resonant frequencies.

  20. Active FEL-Klystrons as Formers of Femto-Second Clusters of Electromagnetic Field. Systems on the Basis of Two-Stream Instability

    Directory of Open Access Journals (Sweden)

    V.V. Kulish

    2012-05-01

    Full Text Available A general analysis of the two-stream cluster FEL-klystrons, as a new high efficient class of electronic devices, intended for generation of femto-second clusters of electromagnetic field has been performed. Three models are described firstly in the article. Detail weak-signal analysis of multi-harmonic processes within the FEL-klystron transition section is accomplished.

  1. Industrial Applications of High Average Power FELS

    CERN Document Server

    Shinn, Michelle D

    2005-01-01

    The use of lasers for material processing continues to expand, and the annual sales of such lasers exceeds $1 B (US). Large scale (many m2) processing of materials require the economical production of laser powers of the tens of kilowatts, and therefore are not yet commercial processes, although they have been demonstrated. The development of FELs based on superconducting RF (SRF) linac technology provides a scaleable path to laser outputs above 50 kW in the IR, rendering these applications economically viable, since the cost/photon drops as the output power increases. This approach also enables high average power ~ 1 kW output in the UV spectrum. Such FELs will provide quasi-cw (PRFs in the tens of MHz), of ultrafast (pulsewidth ~ 1 ps) output with very high beam quality. This talk will provide an overview of applications tests by our facility's users such as pulsed laser deposition, laser ablation, and laser surface modification, as well as present plans that will be tested with our upgraded FELs. These upg...

  2. Renewal of KU-FEL Facility

    CERN Document Server

    Kii, Toshiteru; Masuda, Kai; Murakami, Shio; Ohgaki, Hideaki; Yamazaki, Tetsuo; Yoshikawa, Kiyoshi; Zen, Heishun

    2004-01-01

    Users demands to a high power tunable IR laser are increasing in Japan in energy-related science, such as basic study of high-efficiency solar cells, generation of new energy source of alcohol and/or H2 from polluted gas, and separation of DNA and/or RNA. To satisfy these demands, we decided to renew our FEL facility more user friendly and to operate more flexibly. Construction and fundamental studies on the KU-FEL have been carried out at a building of Institute of Chemical Research where few other accelerators are operating. Therefore, available machine time for our experiments is quite limited. We are now modifying the room by adding concrete walls of 2-m thickness and some space for users will be available. The present FEL system will be moved to the room A photocathode RF-gun system will be nearly added to the system and the present thermionic RF-gun will be used ternatively according to the demands of users. The photocathode material will be Cs2Te. The room with the shielding will be completed in June, ...

  3. A proposed visible FEL Facility at Boeing

    Energy Technology Data Exchange (ETDEWEB)

    Dowell, D.H.; Adamski, J.L.; Hayward, T.D. [Boeing Defense & Space Group, Seattle, WA (United States)] [and others

    1995-12-31

    A 1-kW average power, visible wavelength FEL is described, based on a 120-MeV, 0.1. A macropulse average current linac operating at a duty factor of 0. 6% and having average beam power of 70 kW. The accelerator will employ a demonstrated photoinjector, 18-MeV, 433-MHz linac as an injector, followed by a 1300-MHz longitudinal phase space {open_quotes} linearizer,{close_quotes} a magnetic buncher chicane, and seven 1300-MHz, pulsed traveling wave linac sections. The magnets used to transport the beam from the linac to the FEL centerline, the 5-m THUNDER wiggler, and the optical resonator will be reclaimed from previous FEL demonstration experiments. We expect to attain pulse lengths of 7 ps for 3.5 nC, with minimal distortion of the pulse profile and normalized rms emittance of 7.5 {+-} 2.5 {pi} mm-mr. FELEX projects a laser conversion efficiency of 4.3 %, yielding average output of 3 kW.

  4. Undulators to FELs: Nanometers, Femtoseconds, Coherence and Applications

    Energy Technology Data Exchange (ETDEWEB)

    Attwood, David [University of California Berkeley

    2011-11-30

    For scientists in many fields, from material science to the life sciences and archeology, synchrotron radiation, and in particular undulator radiation, has provide an intense source of x-rays which are tunable to the absorption edges of particular elements of interest, often permitting studies at high spatial and spectral resolution. Now a close cousin to the undulator, the x-ray free electron laser (XFEL) has emerged with improved spatial coherence and, perhaps more importantly, femtosecond pulse durations which permit dynamical studies. In the future attosecond x-ray capabilities are anticipated. In this colloqium we will describe some state of the art undulator studies, how undulators work, the evolution to FELs, their pulse and coherence properties, and the types of experiments envisioned.

  5. Lasing Towards the VUV in the NIJI-IV FEL

    CERN Document Server

    Yamada, K; Ohgaki, H; Mikado, T; Sugiyama, S; Yamazaki, T

    2000-01-01

    The lasing wavelength in the NIJI-IV free electron laser (FEL) reached 212 nm in the deep ultraviolet (UV) range. Adoption of Al sub 2 O sub 3 /SiO sub 2 multilayer mirrors to the laser cavity, whose light absorption loss is sufficiently small even below 220 nm, compared with HfO sub 2 /SiO sub 2 usually used in the UV, was essential to shorten the wavelength in the deep UV range. The laser gain was estimated to be approx 2% around 214 nm with a peak beam current of approx 4A (average beam current of approx 20 mA) from the measured loss of the cavity degraded after the lasing experiments which agreed well with an analytic gain calculation. Lasing in the vacuum ultraviolet (VUV) range is also expected even on the compact storage ring NIJI-IV with possible enhancement of the laser gain.

  6. Present status and recent results from the APS SASE FEL

    CERN Document Server

    Lewellen, J W; Gluskin, E; Arnold, N D; Benson, C; Berg, W; Biedron, S G; Borland, M; Chae, Y C; Dejus, Roger J; Hartog, P K D; Deriy, B; Erdmann, M; Eidelman, Yu I; Hahne, M W; Huang, Z; Kim, K J; Li, Y; Lumpkin, Alex H; Makarov, O; Moog, E; Nassiri, A; Sajaev, Vadim; Soliday, R; Tieman, B J; Trakhtenberg, E; Vasserman, I B; Vinokurov, N A; Wiemerslage, G; Yang, B X

    2002-01-01

    The Low-Energy Undulator Test Line (LEUTL) at the Advanced Photon Source, Argonne National Laboratory, is intended to demonstrate the basic operation of a SASE-based free-electron laser. Goals include comparison of experimental results with theoretical predictions and scaling laws, identification of problems relevant to fourth-generation light source construction and operation and the means of addressing them, the development of operational and diagnostic techniques to optimize SASE FEL performance and increase repeatability from run to run, and performance of initial pioneering experiments capable of exploiting the unique properties of the laser. The basic layout and operational philosophy of the LEUTL experiment is presented. A summary of past results, including saturation, is reviewed, and a description of recent results is presented. We conclude with future plans, which include pressing to shorter wavelengths and incorporating user experiments into the LEUTL experimental program.

  7. High Power Operation of the JLab IR FEL Driver Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Beard; Stephen Benson; George Biallas; James Boyce; Donald Bullard; James Coleman; David Douglas; H. Dylla; Richard Evans; Pavel Evtushenko; Christopher Gould; Albert Grippo; Joseph Gubeli; David Hardy; Carlos Hernandez-Garcia; J. Hovater; Kevin Jordan; John Klopf; Rui Li; Steven Moore; George Neil; Benard Poelker; Thomas Powers; Joseph Preble; Robert Rimmer; Daniel Sexton; Michelle D. Shinn; Christopher Tennant; Richard Walker; Gwyn Williams; Shukui Zhang

    2007-08-01

    Operation of the JLab IR Upgrade FEL at CW powers in excess of 10 kW requires sustained production of high electron beam powers by the driver ERL. This in turn demands attention to numerous issues and effects, including: cathode lifetime; control of beamline and RF system vacuum during high current operation; longitudinal space charge; longitudinal and transverse matching of irregular/large volume phase space distributions; halo management; management of remnant dispersive effects; resistive wall, wake-field, and RF heating of beam vacuum chambers; the beam break up instability; the impact of coherent synchrotron radiation (both on beam quality and the performance of laser optics); magnetic component stability and reproducibility; and RF stability and reproducibility. We discuss our experience with these issues and describe the modus vivendi that has evolved during prolonged high current, high power beam and laser operation.

  8. Beam Property Measurements on the KU-FEL Linac

    CERN Document Server

    Masuda, Kai; Kii, Toshiteru; Murakami, Shio; Ohgaki, Hideaki; Yamazaki, Tetsuo; Yoshikawa, Kiyoshi; Zen, Heishun

    2004-01-01

    An infrared FEL facility is under construction for advanced energy researches [1]. Electron beams of around 30 MeV have been obtained by an S-band 4.5-cell rf gun with a thermionic cathode, and a recently installed 3-m accelerating tube. A 180 degree arc consisting of three bending magnets have been also set up for bunch compression, and beam property measurements are under way. Transverse phase space distributions and resultant emittances have been obtained through the tomographic technique [2] by use of a quadrupole magnet, an alumina phosphor screen and a CCD camera. An OTR screen is being prepared for a higher spatial resolution as well as for longitudinal bunch shape measurements by use of a streak camera of 0.2 psec resolution. Comparison with the start-to-end simulation results [3] will be also presented.

  9. Short wavelength FEL with helical micro-wiggler at FELI

    CERN Document Server

    Nakao, N; Goto, M; Ohigashi, N; Tsunawaki, Y; Moon, A; Nagai, A; Mima, K; Nakai, S; Yamanaka, C

    2000-01-01

    We are planning a short wavelength FEL experiment combining a micro-wiggler and an X-ray seed pulse. A micro-wiggler makes it possible to lase in the VUV to soft X-ray region using a low-energy electron beam. The development of the micro-wiggler is almost complete. With an intense X-ray seed pulse, quick start-up is expected making the wiggler length short. For the seed X-ray source we will use laser-produced Plasma. The validity of this concept was verified using a simulation code based on the SDE-method. With 10 kW X-ray power for seeding the saturation position is shortened to 5 m.

  10. Generating polarization controllable FELs at Dalian coherent light source

    CERN Document Server

    Zhang, T; Wang, D; Zhao, Z T; Zhang, W Q; Wu, G R; Dai, D X; Yang, X M

    2013-01-01

    The property of the FEL polarization is of great importance to the user community. FEL pulses with ultra-high intensity and flexible polarization control ability will absolutely open up new scientific realms. In this paper, several polarization control approaches are presented to investigate the great potential on Dalian coherent light source, which is a government-approved novel FEL user facility with the capability of wavelength continuously tunable in the EUV regime of 50-150 nm. The numerical simulations show that both circularly polarized FELs with highly modulating frequency and 100 microjoule level pulse energy could be generated at Dalian coherent light source.

  11. Innovative FEL schemes using variable-gap undulators

    Science.gov (United States)

    Schneidmiller, E. A.; Yurkov, M. V.

    2017-06-01

    We discuss theoretical background and experimental verification of advanced schemes for X-ray FELs using variable gap undulators (harmonic lasing self-seeded FEL, reverse taper etc.) Harmonic lasing in XFELs is an opportunity to extend operating range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide much more intense, stable, and narrow-band FEL beam which is easier to handle due to the suppressed fundamental. Another interesting application of harmonic lasing is Harmonic Lasing Self-Seeded (HLSS) FEL that allows to improve longitudinal coherence and spectral power of a SASE FEL. Recently this concept was successfully tested at the soft X-ray FEL user facility FLASH in the wavelength range between 4.5 nm and 15 nm. That was also the first experimental demonstration of harmonic lasing in a high-gain FEL and at a short wavelength (before it worked only in infrared FEL oscillators). Another innovative scheme that was tested at FLASH2 is the reverse tapering that can be used to produce circularly polarized radiation from a dedicated afterburner with strongly suppressed linearly polarized radiation from the main undulator. This scheme can also be used for an efficient background-free production of harmonics in an afterburner. Experiments on the frequency doubling that allowed to reach the shortest wavelength at FLASH as well as on post-saturation tapering to produce a record intencity in XUV regime are also discussed.

  12. Dielectric Wakefield Accelerator to drive the future FEL Light Source.

    Energy Technology Data Exchange (ETDEWEB)

    Jing, C.; Power, J.; Zholents, A. (Accelerator Systems Division (APS)); ( HEP); (LLC)

    2011-04-20

    X-ray free-electron lasers (FELs) are expensive instruments and a large part of the cost of the entire facility is driven by the accelerator. Using a high-energy gain dielectric wake-field accelerator (DWA) instead of the conventional accelerator may provide a significant cost saving and reduction of the facility size. In this article, we investigate using a collinear dielectric wakefield accelerator to provide a high repetition rate, high current, high energy beam to drive a future FEL x-ray light source. As an initial case study, a {approx}100 MV/m loaded gradient, 850 GHz quartz dielectric based 2-stage, wakefield accelerator is proposed to generate a main electron beam of 8 GeV, 50 pC/bunch, {approx}1.2 kA of peak current, 10 x 10 kHz (10 beamlines) in just 100 meters with the fill factor and beam loading considered. This scheme provides 10 parallel main beams with one 100 kHz drive beam. A drive-to-main beam efficiency {approx}38.5% can be achieved with an advanced transformer ratio enhancement technique. rf power dissipation in the structure is only 5 W/cm{sup 2} in the high repetition rate, high gradient operation mode, which is in the range of advanced water cooling capability. Details of study presented in the article include the overall layout, the transform ratio enhancement scheme used to increase the drive to main beam efficiency, main wakefield linac design, cooling of the structure, etc.

  13. Coherent harmonic production using a two-section undulator FEL

    Energy Technology Data Exchange (ETDEWEB)

    Jaroszynski, D.A. [Commissariat a l`Energie, Bruyeres-le-Chatel (France); Prazeres, R.; Glotin, F. [Centre Universitaire Paris-Sud (France)] [and others

    1995-12-31

    We present measurements and a theoretical analysis of a new method of generating harmonic radiation in a free-electron laser oscillator with a two section undulator in a single optical cavity. To produce coherent harmonic radiation the undulator is arranged so that the downstream undulator section resonance frequency matches a harmonic of the upstream undulator. Both the fundamental and the harmonic optical fields evolve in the same optical cavity and are coupled out with different extraction fractions using a hole in one of the cavity mirrors. We present measurements that show that the optical power at the second and third harmonic can be enhanced by more than an order of magnitude in this fundamental/harmonic configuration. We compare the production of harmonic radiation of a two sectioned fundamental/harmonic undulator with that produced from a FEL operating at its highest efficiency with a step-tapered undulator, where the bunching at the end of the first section is very large. We examine, the dependence of the harmonic power on the intracavity power by adjusting the optical cavity desynchronism, {delta}L. We also examine the evolution of the fundamental and harmonic powers as a function of cavity roundtrip number to evaluate the importance of the small signal gain at the harmonic. We compare our measurements with predictions of a multi-electron numerical model that follows the evolution of fundamental and harmonic power to saturation. This fundamental/harmonic mode, of operation of the FEL may have useful applications in the production of coherent X-ray and VUV radiation, a spectral range where high reflectivity optical cavity mirrors are difficult or impossible to manufacture.

  14. Characteristics Of The Duke/ok-4 Storage Ring Fel And Gamma-ray Source

    CERN Document Server

    Park, S H

    2000-01-01

    The Duke/OK-4 storage ring is a device for driving a short wavelength Free Electron Laser (FEL). In addition, Compton scattering of the laser light from the circulating electron beam products a semi-monochromatic γ-ray source. The dynamics of such a system including accelerator physics, FEL physics, and Compton backscattering is complex and requires special study, This dissertation is a detailed theoretical and experimental analysis of such a system. The main emphasis of the theory presented here is the self-consistent analysis of the system which incorporates three drastically different processes—the dynamics of an intense electron beam, the free electron laser, and the Compton backscattering. The interdependence of these three processes and the physics of this complex system is discussed in this work. The OK-4/Duke storage ring FEL is the only accelerator facility capable of routine lasing in the deep-UV range and able to generate intense γ-ray beams with energy tunable from 2 ...

  15. Measurements of nonlinear harmonic generation at the Advanced Photon Source's SASE FEL

    CERN Document Server

    Biedron, S G; Borland, M; Dejus, Roger J; Den Hartog, P K; Erdmann, M; Fawley, W M; Freund, H P; Gluskin, E; Huang, Z; Kim, K J; Lewellen, J W; Li, Y; Lumpkin, Alex H; Milton, S V; Moog, E; Nassiri, A; Sajaev, Vadim; Wiemerslage, G; Yang, B X

    2002-01-01

    SASE saturation was recently achieved at the Advanced Photon Source's SASE FEL in the low-energy undulator test line at 530 nm and 385 nm. The electron beam microbunching becomes more and more prominent until saturation is achieved. This bunching causes nonlinear harmonic emission that extends the usefulness of a SASE system in achieving shorter FEL wavelengths for the same electron beam energy. We have investigated the intensity of the fundamental and second harmonic undulator radiation as a function of distance along the undulator line and present the experimental results and compare them to numerical simulations. In addition, we have measured the single-shot second harmonic spectra as well as the simultaneous fundamental and second harmonic spectra and present the experimental results.

  16. First operation of a powerful FEL with two-dimensional distributed feedback

    CERN Document Server

    Agarin, N V; Bobylev, V B; Ginzburg, N S; Ivanenko, V G; Kalinin, P V; Kuznetsov, S A; Peskov, N Yu; Sergeev, A S; Sinitsky, S L; Stepanov, V D

    2000-01-01

    A W-band (75 GHz) FEL of planar geometry driven by a sheet electron beam was realised using the pulse accelerator ELMI (0.8 MeV/3 kA/5 mu s). To provide the spatial coherence of radiation from different parts of the electron beam with a cross-section of 0.4x12 cm two-dimensional distributed feedback systems have been employed using a 2-D Bragg resonator of planar geometry. The resonator consisted of two 2-D Bragg reflectors separated by a regular waveguide section. The total energy in the microwave pulse of microsecond duration was 100 J corresponding to a power of approx 100 MW. The main component of the FEL radiation spectrum was at 75 GHz that corresponded to the zone of effective Bragg reflection found from 'cold' microwave testing of the resonator. The experimental data compared well with the results of theoretical analysis.

  17. JLAMP: AN AMPLIFIER-BASED FEL IN THE JLAB SRF ERL DRIVER

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Jordan; Stephen V. Benson; David Douglas; Pavel Evtushenko; Carlos Hernandez-Garcia; George R. Neil

    2007-06-13

    Notional designs for energy-recovering linac (“ERL”) -driven high average power free electron lasers (“FEL”s) often invoke amplifier-based architectures. To date, however, amplifier FELs have been limited in average power output to values several orders of magnitude lower than those demonstrated in optical-resonator based systems; this is due at least in part to the limited electron beam powers available from their driver accelerators. In order to directly contrast the performance available from amplifiers to that provided by high-power cavity-based resonators, we have developed a scheme to test an amplifier FEL in the JLab SRF ERL driver. We describe an accelerator system design that can seamlessly and non-invasively integrate a 10 m wiggler into the existing system and which provides, at least in principle, performance that would support high-efficiency lasing in an amplifier configuration. Details of the design and an accelerator performance analysis will be presented

  18. On the surface topography of ultrashort laser pulse treated steel surfaces

    NARCIS (Netherlands)

    Obona, J. Vincenc; Ocelik, V.; Skolski, J. Z. P.; Mitko, V. S.; Romer, G. R. B. E.; in't Veld, A. J. Huis; De Hosson, J. Th M.; Römer, G.R.B.E.; Huis in’t Veld, A.J.

    2011-01-01

    This paper concentrates on observations of the surface topography by scanning electron microscopy (SEM) on alloyed and stainless steels samples treated by ultrashort laser pulses with duration of 210 fs and 6.7 ps. Globular-like and jet-like objects were found depending on the various levels of the

  19. Longitudinal Space Charge Effects in the JLAB IR FEL SRF Linac

    CERN Document Server

    Hernandez-Garcia, Carlos; Behre, Chris; Benson, S V; Herman-Biallas, George; Boyce, James; Douglas, David; Dylla, Fred; Evans, Richard; Grippo, A; Gubeli, Joe; Hardy, David; Jordan, Kevin; Merminga, Lia; Neil, George; Preble, Joe; Shinn, Michelle D; Siggins, Tim; Walker, Richard; Williams, Gwyn; Yunn, Byung; Zhang, Shukui

    2004-01-01

    Observations of energy spread asymmetry when operating the Linac on either side of crest and longitudinal emittance growth have been confirmed by extending PARMELA simulations from the injector to the end of the first SRF Linac module. The asymmetry can be explained by the interaction of the accelerating electric field with that from longitudinal space charge effects within the electron bunch. This can be a major limitation to performance in FEL accelerators.

  20. Condensed matter research using the UCSB FEL. Final technical report, May 1, 1984--January 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The University of California, Santa Barbara (UCSB) Free Electron Laser (FEL) project was initiated in 1981 to test the idea of using an electrostatic accelerator in a recirculating beam mode to produce high-power, continuously tunable, coherent far infrared radiation. The development and application of this device to condensed matter research are briefly recounted. Emphasis was on semiconductor research and two-photon experiments. (RWR)

  1. Commissioning experience and beam physics measurements at the SwissFEL Injector test Facility

    CERN Document Server

    Schietinger, T.; Aiba, M.; Arsov, V.; Bettoni, S.; Beutner, B.; Calvi, M.; Craievich, P.; Dehler, M.; Frei, F.; Ganter, R.; Hauri, C. P.; Ischebeck, R.; Ivanisenko, Y.; Janousch, M.; Kaiser, M.; Keil, B.; Löhl, F.; Orlandi, G. L.; Ozkan Loch, C.; Peier, P.; Prat, E.; Raguin, J.-Y.; Reiche, S.; Schilcher, T.; Wiegand, P.; Zimoch, E.; Anicic, D.; Armstrong, D.; Baldinger, M.; Baldinger, R.; Bertrand, A.; Bitterli, K.; Bopp, M.; Brands, H.; Braun, H. H.; Brönnimann, M.; Brunnenkant, I.; Chevtsov, P.; Chrin, J.; Citterio, A.; Csatari Divall, M.; Dach, M.; Dax, A.; Ditter, R.; Divall, E.; Falone, A.; Fitze, H.; Geiselhart, C.; Guetg, M. W.; Hämmerli, F.; Hauff, A.; Heiniger, M.; Higgs, C.; Hugentobler, W.; Hunziker, S.; Janser, G.; Kalantari, B.; Kalt, R.; Kim, Y.; Koprek, W.; Korhonen, T.; Krempaska, R.; Laznovsky, M.; Lehner, S.; Le Pimpec, F.; Lippuner, T.; Lutz, H.; Mair, S.; Marcellini, F.; Marinkovic, G.; Menzel, R.; Milas, N.; Pal, T.; Pollet, P.; Portmann, W.; Rezaeizadeh, A.; Ritt, S.; Rohrer, M.; Schär, M.; Schebacher, L.; Scherrer, St.; Schlott, V.; Schmidt, T.; Schulz, L.; Smit, B.; Stadler, M.; Steffen, Bernd; Stingelin, L.; Sturzenegger, W.; Treyer, D. M.; Trisorio, A.; Tron, W.; Vicario, C.; Zennaro, R.; Zimoch, D.

    2016-10-26

    The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including atransverse deflecting rf cavity. It delivered electron bunchesof up to200 pC chargeand up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of a FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measureme...

  2. Development of photoinjector RF cavity for high-power CW FEL

    Science.gov (United States)

    Kurennoy, S. S.; Schrage, D. L.; Wood, R. L.; Young, L. M.; Schultheiss, T.; Christina, V.; Rathke, J.

    2004-08-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high-power CW FEL. A preliminary design of the first, and the most challenging, section of a 700-MHz CW RF normal-conducting photoinjector—a 2.5-cell, pi-mode cavity with solenoidal magnetic field for emittance compensation—is completed. Beam dynamics simulations demonstrate that this cavity with an electric field gradient of 7 MV/m will produce an electron beam at 2.7 MeV with the transverse rms emittance 7 mm mrad at 3 nC of charge per bunch. Electromagnetic field computations combined with a thermal and stress analysis show that the challenging problem of cavity cooling can be successfully resolved. We are in the process of building a 100-mA (3 nC of bunch charge at 33.3 MHz bunch repetition rate) photoinjector for demonstration purposes. Its performance parameters will enable a robust 100-kW-class FEL operation with electron beam energy below 100 MeV. The design is scalable to higher power levels by increasing the electron bunch repetition rate and provides a path to a MW-class amplifier FEL.

  3. Development of photoinjector RF cavity for high-power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S.S. E-mail: kurennoy@lanl.gov; Schrage, D.L.; Wood, R.L.; Young, L.M.; Schultheiss, T.; Christina, V.; Rathke, J

    2004-08-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high-power CW FEL. A preliminary design of the first, and the most challenging, section of a 700-MHz CW RF normal-conducting photoinjector - a 2.5-cell, pi-mode cavity with solenoidal magnetic field for emittance compensation - is completed. Beam dynamics simulations demonstrate that this cavity with an electric field gradient of 7 MV/m will produce an electron beam at 2.7 MeV with the transverse rms emittance 7 mm mrad at 3 nC of charge per bunch. Electromagnetic field computations combined with a thermal and stress analysis show that the challenging problem of cavity cooling can be successfully resolved. We are in the process of building a 100-mA (3 nC of bunch charge at 33.3 MHz bunch repetition rate) photoinjector for demonstration purposes. Its performance parameters will enable a robust 100-kW-class FEL operation with electron beam energy below 100 MeV. The design is scalable to higher power levels by increasing the electron bunch repetition rate and provides a path to a MW-class amplifier FEL.

  4. Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

    Directory of Open Access Journals (Sweden)

    T. Schietinger

    2016-10-01

    Full Text Available The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measurements performed during the operation of the test facility, including the results of the test of an in-vacuum undulator prototype generating radiation in the vacuum ultraviolet and optical range.

  5. Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

    CERN Document Server

    Schietinger, T; Aiba, M; Arsov, V; Bettoni, S; Beutner, B; Calvi, M; Craievich, P; Dehler, M; Frei, F; Ganter, R; Hauri, C P; Ischebeck, R; Ivanisenko, Y; Janousch, M; Kaiser, M; Keil, B; Löhl, F; Orlandi, G L; Loch, C Ozkan; Peier, P; Prat, E; Raguin, J -Y; Reiche, S; Schilcher, T; Wiegand, P; Zimoch, E; Anicic, D; Armstrong, D; Baldinger, M; Baldinger, R; Bertrand, A; Bitterli, K; Bopp, M; Brands, H; Braun, H H; Brönnimann, M; Brunnenkant, I; Chevtsov, P; Chrin, J; Citterio, A; Divall, M Csatari; Dach, M; Dax, A; Ditter, R; Divall, E; Falone, A; Fitze, H; Geiselhart, C; Guetg, M W; Hämmerli, F; Hauff, A; Heiniger, M; Higgs, C; Hugentobler, W; Hunziker, S; Janser, G; Kalantari, B; Kalt, R; Kim, Y; Koprek, W; Korhonen, T; Krempaska, R; Laznovsky, M; Lehner, S; Pimpec, F Le; Lippuner, T; Lutz, H; Mair, S; Marcellini, F; Marinkovic, G; Menzel, R; Milas, N; Pal, T; Pollet, P; Portmann, W; Rezaeizadeh, A; Ritt, S; Rohrer, M; Schär, M; Schebacher, L; Scherrer, St; Schmidt, V Schlott T; Schulz, L; Smit, B; Stadler, M; Steffen, B; Stingelin, L; Sturzenegger, W; Treyer, D M; Trisorio, A; Tron, W; Vicario, C; Zennaro, R; Zimoch, D

    2016-01-01

    The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and testbed for the development and realization of SwissFEL, the X-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultra-low-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics meas...

  6. Harmonic cascade FEL designs for LUX, a facility for ultrafast x-ray science

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, John; Fawley, William; Penn, Gregory; Wan, Weishi; Zholents, A.; Reinsch, M.; Wurtele, Jonathan

    2004-08-25

    LUX is a design study to develop concepts for future ultrafast x-ray facilities. Presently, LUX is based on an electron beam accelerated to {approx}3-GeV energy in a superconducting, recirculating linac. Included in the design are multiple free-electron laser (FEL) beamlines which use the harmonic cascade approach to produce coherent XUV and soft X-ray emission beginning with a strong input seed at {approx}200-nm wavelength obtained from a ''conventional'' laser. Each cascade module generally operates in the low-gain regime and is composed of a radiator together with a modulator section, separated by a magnetic chicane. The chicane temporally delays the electron beam pulse in order that a ''virgin'' pulse region (with undegraded energy spread) be brought into synchronism with the radiation pulse. For a given cascade, the output photon energy can be selected over a wide range by varying the seed laser wavelength and the field strength in the undulators. We present numerical simulation results, as well as those from analytical models, to examine certain aspects of the predicted FEL performance. We also discuss lattice considerations pertinent to harmonic cascade FELs, some sensitivity studies and requirements on the undulator alignment, and temporal pulse evolution initiated by short input radiation seeds.

  7. Simulation of the fundamental and nonlinear harmonic output from an FEL amplifier with a soft x-ray seed laser

    Energy Technology Data Exchange (ETDEWEB)

    Biedron, S. G.; Freund, H. P.; Li, Y.; Milton, S. V.

    2000-07-05

    A single-pass, high-gain free-electron laser (FEL) x-ray amplifier was simulated using the 3D, polychromatic simulation code MEDUSA. The seed for the system is a table-top, soft x-ray laser. The simulated fundamental and nonlinear harmonic x-ray output wavelengths are discussed.

  8. Multi-dimensional free-electron laser simulation codes: a comparison study

    CERN Document Server

    Biedron, S G; Dejus, Roger J; Faatz, B; Freund, H P; Milton, S V; Nuhn, H D; Reiche, S

    2000-01-01

    A self-amplified spontaneous emission (SASE) free-electron laser (FEL) is under construction at the Advanced Photon Source (APS). Five FEL simulation codes were used in the design phase: GENESIS, GINGER, MEDUSA, RON, and TDA3D. Initial comparisons between each of these independent formulations show good agreement for the parameters of the APS SASE FEL.

  9. Black phosphorus saturable absorber for ultrashort pulse generation

    Energy Technology Data Exchange (ETDEWEB)

    Sotor, J., E-mail: jaroslaw.sotor@pwr.edu.pl; Sobon, G.; Abramski, K. M. [Laser and Fiber Electronics Group, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, Wroclaw 50-370 (Poland); Macherzynski, W.; Paletko, P. [Faculty of Microsystem Electronics and Photonics, Wroclaw University of Technology, Janiszewskiego 11/17, Wroclaw 50-372 (Poland)

    2015-08-03

    Low-dimensional materials, due to their unique and versatile properties, are very interesting for numerous applications in electronics and optoelectronics. Recently rediscovered black phosphorus, with a graphite-like layered structure, can be effectively exfoliated up to the single atomic layer called phosphorene. Contrary to graphene, it possesses a direct band gap controllable by the number of stacked atomic layers. For those reasons, black phosphorus is now intensively investigated and can complement or replace graphene in various photonics and electronics applications. Here, we demonstrate that black phosphorus can serve as a broadband saturable absorber and can be used for ultrashort optical pulse generation. The mechanically exfoliated ∼300 nm thick layers of black phosphorus were transferred onto the fiber core, and under pulsed excitation at 1560 nm wavelength, its transmission increases by 4.6%. We have demonstrated that the saturable absorption of black phosphorus is polarization sensitive. The fabricated device was used to mode-lock an Er-doped fiber laser. The generated optical solitons with the 10.2 nm bandwidth and 272 fs duration were centered at 1550 nm. The obtained results unambiguously show that black phosphorus can be effectively used for ultrashort pulse generation with performances similar or even better than currently used graphene or carbon nanotubes. This application of black phosphorus proves its great potential to future practical use in photonics.

  10. Ultrashort Laser Pulses in Biology and Medicine

    CERN Document Server

    Braun, Markus; Zinth, Wolfgang

    2008-01-01

    Sources of ultrashort laser pulses are nowadays commercially available and have entered many areas of research and development. This book gives an overview of biological and medical applications of these laser pulses. The briefness of these laser pulses permits the tracing of the fastest processes in photo-active bio-systems, which is one focus of the book. The other focus is applications that rely on the high peak intensity of ultrashort laser pulses. Examples covered span non-linear imaging techniques, optical tomography, and laser surgery.

  11. Design Concept for a Compact ERL to Drive a VUV/Soft X-Ray FEL

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Tennant ,David Douglas

    2011-03-01

    We explore possible upgrades of the existing Jefferson Laboratory IR/UV FEL driver to higher electron beam energy and shorter wavelength through use of multipass recirculation to drive an amplifier FEL. The system would require beam energy at the wiggler of 600 MeV with 1 mA of average current. The system must generate a high brightness beam, configure it appropriately, and preserve beam quality through the acceleration cycle ? including multiple recirculations ? and appropriately manage the phase space during energy recovery. The paper will discuss preliminary design analysis of the longitudinal match, space charge effects in the linac, and recirculator design issues, including the potential for the microbunching instability. A design concept for the low energy recirculator and an emittance preserving lattice solution will be presented.

  12. Preliminary Design of a Synchronized Narrow Bandwidth FEL for Taiwan Light Source

    CERN Document Server

    Keung Lau Wai; Ching Fan, Tai; Zone Hsiao Feng; Tung Hsu Kuo; Hwang, Ching Shiang; Cheng Kuo Chin; Huei Luo Guo; Jen Wang Duan; Ping Wang Jau; Huey Wang Min

    2004-01-01

    Design study of a narrow line-width, high power IR-FEL facility has been carried out at NSRRC. This machine is designed to synchronize with the U9 undulator radiation of Taiwan Light Source and therefore provide new opportunity for chemical dynamics and condensed matter research. It has been proposed to use a super-conducting linac to provide a 60 MeV high quality electron beam to drive a 2.5-10 microns FEL oscillator with U5 undulator. Operating this linac in energy recovery mode will also be considered as an option to improve overall system effeciency and reduce heat loss and radiation dosage at the beam dump. Performance requirements and outcomes from this preliminary design study will be reported.

  13. A Fast Switchyard for the TESLA FEL-Beam Using a Superconducting Transverse Mode Cavity

    CERN Document Server

    Wanzenberg, R

    2000-01-01

    In the present design of the TESLA Linear Collider with integrated X-ray Laser Facility it is necessary that 1 ms long bunch trains with about 10000 bunches are generated and distributed to several free electron laser (FEL) beam lines. The different scientific applications of the X-ray FELs need specific filling patterns of the bunches in the bunch train. It is shown that a fast switch-yard based on a superconducting transverse mode cavity can be used to generate the required bunch pattern in a flexible way while keeping the beam loading in the main linear accelerator constant. The conceptual design of the beam optics and the transverse mode cavity are presented.

  14. Tapering studies for Terawatt level X-ray FELs with a superconducting undulator

    CERN Document Server

    Emma, Claudio; Emma, Paul; Huang, Zhirong; Pellegrini, Claudio

    2015-01-01

    We study the tapering optimization scheme for a short period, less than two cm, superconducting undulator, and show that it can generate 4 keV X-ray pulses with peak power in excess of 1 terawatt, using LCLS electron beam parameters. We study the e?ect of undulator module length relative to the FEL gain length for continous and step-wise taper pro?les. For the optimal section length of 1.5m we study the evolution of the FEL process for two di?erent superconducting technologies NbTi and Nb3Sn. We discuss the major factors limiting the maximum output power, particle detrapping around the saturation location and time dependent detrapping due to generation and ampli?cation of sideband modes.

  15. Design Studies for a High-Repetition-Rate FEL Facility at LBNL.

    Energy Technology Data Exchange (ETDEWEB)

    CORLETT, J.; BELKACEM, A.; BYRD, J. M.; FAWLEY, W.; KIRZ, J.; LIDIA, S.; MCCURDY, W.; PADMORE, H.; PENN, G.; POGORELOV, I.; QIANG, J.; ROBIN, D.; SANNIBALE, F.; SCHOENLEIN, R.; STAPLES, J.; STEIER, C.; VENTURINI, M.; WAN, W.; WILCOX, R.; ZHOLENTS, A.

    2007-10-04

    Lawrence Berkeley National Laboratory (LBNL) is working to address the needs of the primary scientific Grand Challenges now being considered by the U.S. Department of Energy, Office of Basic Energy Sciences: we are exploring scientific discovery opportunities, and new areas of science, to be unlocked with the use of advanced photon sources. A partnership of several divisions at LBNL is working to define the science and instruments needed in the future. To meet these needs, we propose a seeded, high-repetition-rate, free-electron laser (FEL) facility. Temporally and spatially coherent photon pulses, of controlled duration ranging from picosecond to sub-femtosecond, are within reach in the vacuum ultraviolet (VUV) to soft X-ray regime, and LBNL is developing critical accelerator physics and technologies toward this goal. We envision a facility with an array of FELs, each independently configurable and tunable, providing a range of photon-beam properties with high average and peak flux and brightness.

  16. Intense inverse compton {gamma}-ray source from Duke storage ring FEL

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Madey, J.M.J. [Duke Univ., Durham, NC (United States)

    1995-12-31

    We suggest using FEL intracavity power in the Duke storage ring fortrays production via Inverse Compton Backscattering (ICB). The OK-4 FEL driven by the Duke storage ring will tens of watts of average lasing power in the UV/VUV range. Average intracavity power will be in kilowatt range and can be used to pump ICB source. The {gamma}-rays with maximum energy from 40 MeV to 200 MeV with intensity of 0.1-5 10{sup 10}{gamma} per second can be generated. In this paper we present expected parameters of {gamma}-ray beam parameters including its intensity and distribution. We discuss influence of e-beam parameters on collimated {gamma}-rays spectrum and optimization of photon-electron interaction point.

  17. A hybrid type undulator for far-infrared FELs at FELI

    Energy Technology Data Exchange (ETDEWEB)

    Zako, A.; Miyauchi, Y.; Koga, A. [Free Electron Laser Research Institute, Inc., Osaka (Japan)] [and others

    1995-12-31

    Two FEL facilities of the FELI are now operating in the wavelength range of 1-20 {mu}m. A 3.2-m hybrid type undulator ({lambda}{sub u}=80mm, N=40) has been designed for far-infrared FELs and will be installed in December. It can cover the wavelength of 20-60 {mu}m by changing K-value from 1 to 2.7 for a 28.0-MeV electron beam. It is composed of ferrite magnetic poles and Sm-Co permanent magnets. Commonly wound coils induce alternating magnetic field in ferrite poles. Combination of the induced field and the permanent magnet field can controls the magnetic field between the undulator gap.

  18. Step-tapered operation of the FEL: efficiency enhancement and two-colour operation

    Science.gov (United States)

    Jaroszynski, D. A.; Prazeres, R.; Glotin, F.; Marcouillé, O.; Ortega, J. M.; Oepts, D.; van der Meer, A. F. G.; Knippels, G. M. H.; van Amersfoort, P. W.

    1996-02-01

    We present measurements of the temporal and spectral properties of radiation produced from the step-tapered undulator infrared free-electron lasers (FELs), CLIO in France and FELIX in the Netherlands. Using a two section undulator with independently adjustable deflection parameters, K, the FEL will operate either with an enhanced efficiency and improved spectral properties (with a small positive ΔK step) or simultaneously at two frequencies (for large ΔK). Using a dispersion-free hole output coupler the maximum wavelength difference {δλ}/{λ}, has now been extended to more than {δλ}/{λ} ≈ 0.6. We also present measurements that show that the FEL FELIX will produce significant power simultaneously at two wavelengths by coherent spontaneous emission when the wavelength is long and the electron bunch is short. The efficiency, spectral and temporal properties have been measured. We show that at the maximum efficiency, ΔK ≈ 0.02, the optical pulses generated are smooth and close to Fourier transform limited. By adjusting ΔK the optical pulse duration can be varied by a factor of 2 or more and sidebands due to synchrotron oscillations can be suppressed.

  19. High-gain Seeded FEL Amplifier Tunable in the Terahertz Range

    CERN Document Server

    Sung, C; Pellegrini, C; Ralph, J E; Reiche, S; Rosenzweig, J B; Tochitsky, Sergei Ya

    2005-01-01

    The lack of a high-power, relatively low-cost and compact terahertz (THz) source in the range 0.3-3x10(12) Hz is the major obstacle in progressing on biomedical and material studies at these wavelengths. A high-gain, single pass seeded FEL technique allows to obtain high power THz pulses of a high spectral brightness. We describe an ongoing project at the Neptune laboratory where a ~ 1kW seed pulse generated by difference frequency mixing of CO2 laser lines in a GaAs nonlinear crystal is injected into a waveguide FEL amplifier. The FEL is driven by a 5 ps (r.m.s) long electron pulse with a peak current up to 100A provided by a regular S-band photoinjector. According to 3-D, time dependent simulations, up to ~ 10 MW THz power can be generated using a 2 meter long planar undulator. By mixing different pairs of CO2 laser lines and matching resonant energy of the electron beam, tunability in the 100-400 mm range is expected. A tunable Fabri-Perot interferometer will be used to select a high-power 5ps THz pulse. T...

  20. Investigation of bunch repetition rate deviations in FIR FEL driven by a magnetron-based microtron

    CERN Document Server

    Kazakevitch, Grigori M; Lee Byung Cheol; Lee, J

    2002-01-01

    The stability of the bunch repetition rate in a FIR FEL driven by a 2.8 GHz magnetron-based microtron was investigated using a heterodyne method with a low Q-factor straight-flight measuring cavity. The measuring cavity is located in the straight section of the FIR FEL injection beam line and is excited by the passage of electron bunches. The RF signal from the measuring cavity coupling loop was mixed with a precise heterodyne signal with a frequency difference of several MHz. The beat frequency was analyzed to obtain the temporal distribution of the bunch repetition rate deviation during the macro pulse of the electron beam. The time resolution and the accuracy of measurements are approximately 100 ns and a few kHz, respectively. Based on this data, we could determine the level and shape of the magnetron current and the initial frequency shift between magnetron and accelerating cavity for the FEL operation in the wavelength range 100-300 microns.

  1. Numerical Simulation of HGHG Operation for the SDUV-FEL

    CERN Document Server

    Li, D G; Gu, Q; Xu, Y; Zhao, X F; Zhao, Z

    2005-01-01

    In this paper, we present the numerical simulation for HGHG operation of the Shanghai deep ultra-violet free electron laser source (SDUV-FEL). In this operation, a 264nm seed laser interacts with a 277MeV, 400A, normalized emittance 4mm.rad and local energy spread 0.1% electron beam in the first wiggler(modulator) with period 5cm, total length 0.8m and parameter K=2.03, where the energy of the electron beam is modulated. Then through a dispersion section with dy/dg~6.3, the energy modulation is converted to spatial bunching. In the second wiggler (radiator) with period 2.5cm, total length 10m and parameter K=1.45, the 88nm coherent radiation is generated in the first two gain lengths and its radiation power is exponentially amplified after two gain lengths. The simulation indicates that about several hundred MW 88nm and about few MW 29.3nm radiation can be produced.

  2. Tailoring the amplification of attosecond pulse through detuned X-ray FEL undulator.

    Science.gov (United States)

    Kumar, Sandeep; Kang, Heung-Sik; Kim, Dong Eon

    2015-02-09

    We demonstrate that the amplification of attosecond pulse in X-ray free electron laser (FEL) undulator can be tailored. The characteristic of the amplification of an isolated attosecond pulse in the FEL undulator is investigated. An isolated 180 attoseconds full width half maximum (FWHM) pulse at 1.25 nm with a spectral bandwidth of 1% is injected into an undulator. The simulation results show that for a direct seeding of 3MW, the seed is amplified to the peak power of 106 GW (40 μJ, an output pulse-width of 383 attoseconds) in the presence of a detuning at FEL resonance condition in 100-m long undulator. We note that the introduction of detuning leads to the better performance compared to the case without detuning: shorter by 15.5% in a pulse-width and higher by 76.6% in an output power. Tapering yields a higher power (116% increases in the output power compared to the case without detuning) but a longer pulse (15.4% longer in the pulse-width). It was observed that ± Δλ(r)/8 (Δλ(r)/λ(r) ~1%) is the maximum degree of detuning, beyond which the amplification becomes poor: lower in the output power and longer in the pulse duration. The minimum power for a seed pulse needs to be higher than 1 MW for the successful amplification of an attosecond pulse at 1.25 nm. Also, the electron beam energy-spread must be less than 0.1% for a suitable propagation of attosecond pulse along the FEL undulator under this study.

  3. Undulator beamline optimization with integrated chicanes for X-ray free-electron-laser facilities.

    Science.gov (United States)

    Prat, Eduard; Calvi, Marco; Ganter, Romain; Reiche, Sven; Schietinger, Thomas; Schmidt, Thomas

    2016-07-01

    An optimization of the undulator layout of X-ray free-electron-laser (FEL) facilities based on placing small chicanes between the undulator modules is presented. The installation of magnetic chicanes offers the following benefits with respect to state-of-the-art FEL facilities: reduction of the required undulator length to achieve FEL saturation, improvement of the longitudinal coherence of the FEL pulses, and the ability to produce shorter FEL pulses with higher power levels. Numerical simulations performed for the soft X-ray beamline of the SwissFEL facility show that optimizing the advantages of the layout requires shorter undulator modules than the standard ones. This proposal allows a very compact undulator beamline that produces fully coherent FEL pulses and it makes possible new kinds of experiments that require very short and high-power FEL pulses.

  4. Limits of applicability of a two-temperature model under nonuniform heating of metal by an ultrashort laser pulse

    Science.gov (United States)

    Polyakov, D. S.; Yakovlev, E. B.

    2015-10-01

    The heating of metals (silver and aluminium) by ultrashort laser pulses is analysed proceeding from a spatially nonuniform kinetic equation for the electron distribution function. The electron subsystem thermalisation is estimated in a wide range of absorbed pulse energy density. The limits of applicability are determined for the two-temperature model.

  5. The Present Applications of IR FEL at Peking University

    CERN Document Server

    Yang Li Min; Zhao, Kui

    2004-01-01

    In this study the sections of human tissues were treated under 9.5 μm FEL in the BFEL based on the vibrational spectroscopic investigation that significant differences occur between normal and malignant tissues. Under the defocus condition, the burning of tissue section at some part while other part remains unchanged, suggesting that the FEL can selectively destroy some part of tissue. Vibrational spectroscopic and microscopic methods have shown that the FEL can induce decomposition of malignant tissues. The application of FEL whose wavelength is on the characteristic bands of malignant tissues may provide a new method to kill cancer cells with higher selectivity. For understanding the interactions between FEL and biological tissues, structure changes of substances under irradiation by FEL of 9.414 μm and 6.228 μm were measured using FTIR spectroscopy. The samples include ATP, ADP, AMP, and D-ribose, etc. The FTIR spectra of the molecules before and after irradiation of FEL indicate...

  6. Design of a high average-power FEL driven by an existing 20 MV electrostatic-accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kimel, I.; Elias, L.R. [Univ. of Central Florida, Orlando, FL (United States)

    1995-12-31

    There are some important applications where high average-power radiation is required. Two examples are industrial machining and space power-beaming. Unfortunately, up to date no FEL has been able to show more than 10 Watts of average power. To remedy this situation we started a program geared towards the development of high average-power FELs. As a first step we are building in our CREOL laboratory, a compact FEL which will generate close to 1 kW in CW operation. As the next step we are also engaged in the design of a much higher average-power system based on a 20 MV electrostatic accelerator. This FEL will be capable of operating CW with a power output of 60 kW. The idea is to perform a high power demonstration using the existing 20 MV electrostatic accelerator at the Tandar facility in Buenos Aires. This machine has been dedicated to accelerate heavy ions for experiments and applications in nuclear and atomic physics. The necessary adaptations required to utilize the machine to accelerate electrons will be described. An important aspect of the design of the 20 MV system, is the electron beam optics through almost 30 meters of accelerating and decelerating tubes as well as the undulator. Of equal importance is a careful design of the long resonator with mirrors able to withstand high power loading with proper heat dissipation features.

  7. Experimental Characterization of the Seeded FEL Amplifier at the BNL SDL

    CERN Document Server

    Watanabe, T; Murphy, J B; Rose, J; Shaftan, T V; Tsang, Thomas; Wang, X J; Yu, L H

    2005-01-01

    A laser seeded near IR FEL amplifier experiment was initiated at the BNL SDL [1] to explore various schemes of FEL efficiency improvement and generation of short Rayleigh length (SRL) FEL output. The FEL achieved first SASE lasing at 0.8 μm on May 6, 2005. The experimental characterization of the laser seeded FEL output power, spectrum and transverse mode structure evolution will be presented.

  8. Los Alamos High-Brightness Accelerator FEL (HIBAF) facility

    Energy Technology Data Exchange (ETDEWEB)

    Cornelius, W.D.; Bender, S.; Meier, K.; Thode, L.E.; Watson, J.M.

    1989-01-01

    The 10-/mu/m Los Alamos free-electron laser (FEL) facility is being upgraded. The conventional electron gun and bunchers have been replaced with a much more compact 6-MeV photoinjector accelerator. By adding existing parts from previous experiments, the primary beam energy will be doubled to 40 MeV. With the existing 1-m wiggler (/lambda//sub w/ = 2.7 cm) and resonator, the facility can produce photons with wavelengths from 3 to 100 /mu/m when lasing on the fundamental mode and produce photons in the visible spectrum with short-period wigglers or harmonic operation. After installation of a 150/degree/ bend, a second wiggler will be added as an amplifier. The installation of laser transport tubes between the accelerator vault and an upstairs laboratory will provide experimenters with a radiation-free environment for experiments. Although the initial experimental program of the upgraded facility will be to test the single accelerator-master oscillator/power amplifier configuration, some portion of the operational time of the facility can be dedicated to user experiments. 13 refs., 5 figs., 6 tabs.

  9. Extension of the spectral range of the CLIO FEL

    Energy Technology Data Exchange (ETDEWEB)

    Marcouille, O.; Boyer, J.C.; Corlier, M. [LURE, Orsay (France)] [and others

    1995-12-31

    The CLIO FEL has been designed to lase between 2 and 20 {mu}m. The electrons are produced by a 32/50 MeV RF linear accelerator. The injector is a 100 keV thermoionic gun, followed by a subharmonic prebuncher at 0.5 GHz and a buncher at 3 GHz. The electron beam is then accelerated in a 4.5 m long travelling wave accelerating section, to the nominal energy. The undulator consisted of 48 periods of 40 mm and the optical cavity is 4.8 m long which corresponds to a 1.2 m Rayleigh length. The peak power extracted by a ZnSe Brewster plate is 10 MW at 10 {mu}. But, beyond 11{mu}m, the laser power decreases rapidely and no laser oscillation appears above 17 {mu}m. In order to lase at farther wavelengths, few changes have been made: First of all, the power limit is due to the diffraction losses of the undulator vaccuum chamber (7 mm height and 2 m long). Numerical calculations have been made and show that cavity losses reach 55 % at 15 {mu}m whereas the measured gain is 60 %. Consequently, the undulator vaccuum chamber have been replaced by a approximately twice bigger one. Then, the minimum gap is increased and the maximum deflection parameter K is reduced by a factor 2: laser tunability is greatly reduced. This why a new undulator has been built. The main characteristics are summarized.

  10. The general solution of the eigenvalue problem for a high-gain FEL

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2001-01-01

    The exact solution of the eigenvalue equation for a high-gain FEL derived in Xie (Nucl. Instr. and Meth. A 445 (2000) 59) is generalized in order to include the space charge effects. This solution is valid not only for natural undulator focusing, but also for alternating-gradient focusing under some condition that is presented. At such, the obtained solution includes all the important effects in the system of axially homogeneous electron beam and undulator: diffraction, betatron motion, energy spread, space charge and frequency detuning. It is valid for ground TEM sub 0 sub 0 mode as well as for high-order modes and can be used for calculation of high-gain FEL amplifiers operating in the wavelength regions from far infrared down to X-ray. In addition, a computationally efficient approximate solution for TEM sub 0 sub 0 mode is derived providing high accuracy (better than 1% in the whole range of parameters). It can be used for quick optimization of FEL amplifiers.

  11. FTIR Spectroscopy on Basic Materials in THz Region for Compact FEL-Based Imaging

    CERN Document Server

    Cha, H J; Lee, B C; Park, S H

    2005-01-01

    We are making experiments on THz(terahertz) imaging using a compact high power FEL (free-electron laser) which is operating as a users facility at KAERI. The wavelength range of output pulses is 100~1200 μm, which corresponds to 0.3~3 THz in the frequency region. We should select the optimum wavelength for the constituents of specimens to realize the imaging based on the THz FEL. A FTIR (Fourier-transform infrared) spectrometer was modified to measure the optical constants of the specimens in THz region. A polyester film of which thickness is 3.7 μm was used as a beam splitter of the spectrometer. In the case of normal incidence, the transmittance of the film was measured to be more than 90%, and the estimated loss by absorption was approximately 2% at the FEL frequency of 3 THz. Several tens of nanometer-thick-silver was coated on the polyester film to balance both transmission and reflection of THz waves in the beam splitter. We investigated FTIR spectroscopy on air, vapor and liquid water...

  12. FERMI @ Elettra A Seeded Harmonic Cascade FEL for EUV and Soft X-Rays

    CERN Document Server

    Bocchetta, C J; Craievich, P; D'Auria, G; Danailov, M B; De Ninno, G; Di Mitri, S; Diviacco, B; Ferianis, M; Gomezel, A; Iazzourene, F; Karantzoulis, E; Penco, G; Trovò, M

    2005-01-01

    We describe the machine layout and major performance parameters for the FERMI FEL project funded for construction at Sincrotrone Trieste, Italy. The project will be the first user facility based on seeded harmonic cascade FELs, providing controlled, high peak-power pulses. With a high-brightness rf photocathode gun, and using the existing 1.2 GeV S-band linac, the facility will provide tunable output over a range from ~100 nm to ~10 nm, with pulse duration from 40 fs to ~ 1ps, and with fully variable output polarization. Initially, two FEL cascades are planned; a single-stage harmonic generation to operate > 40 nm, and a two-stage cascade operating from ~40 nm to ~10 nm or shorter wavelength. The output is spatially and temporally coherent, with peak power in the GW range. Lasers provide modulation to the electron beam, as well as driving the photocathode and other systems, and the facility will integrate laser systems with the accelerator infrastructure, including a state-of-the-art optical timing sys...

  13. FERMI @ Elettra -- A Seeded Harmonic Cascade FEL for EUV and SoftX-rays

    Energy Technology Data Exchange (ETDEWEB)

    Bocchetta, C.; Bulfone, D.; Craievich, P.; Danailov, M.B.; D' Auria,G.; DeNinno, G.; Di Mitri, S.; Diviacco, B.; Ferianis, M.; Gomezel, A.; Iazzourene, F.; Karantzoulis, E.; Parmigiani, F.; Penco, G.; Trovo, M.; Corlett, J.; Fawley, W.; Lidia, S.; Penn, G.; Ratti, A.; Staples, J.; Wilcox, R.; Zholents, A.; Graves, W.; Ilday, F.O.; Kaertner,F.; Wang, D.; Zwart, T.; Cornacchia, M.; Emma, P.; Huang, Z.; Wu, J.

    2005-09-01

    We describe the machine layout and major performance parameters for the FERMI FEL project funded for construction at Sincrotrone Trieste, Italy, within the next five years. The project will be the first user facility based on seeded harmonic cascade FELs, providing controlled, high peak-power pulses. With a high-brightness rf photocathode gun, and using the existing 1.2 GeV S-band linac, the facility will provide tunable output over a range from {approx}100 nm to {approx}10nm, with pulse duration from 40 fs to {approx} 1 ps, peak power GW, and with fully variable output polarization. Initially, two FEL cascades are planned; a single-stage harmonic generation to operate >40 nm, and a two stage cascade operating from {approx}40 nm to {approx}10 nm or shorter wavelength. The output is spatially and temporally coherent, with peak power in the GW range. Lasers provide modulation to the electron beam, as well as driving the photocathode and other systems, and the facility will integrate laser systems with the accelerator infrastructure, including a state-of-the-art optical timing system providing synchronization of rf signals, lasers, and x-ray pulses. Major systems and overall facility layout are described, and key performance parameters summarized.

  14. FERMI@Elettra: A Seeded Harmonic Cascade FEL for EUV and Soft X-Rays

    Energy Technology Data Exchange (ETDEWEB)

    Bocchetta, C.J.; Bulfone, D.; Craievich, P.; Danailov, M.B.; D' Auria, G.; De Ninno, G.; Di Mitri, S.; Diviacco, B.; Ferianis, M.; Gomezel, A.; Iazzourene, F.; Karantzoulis, E.; Parmigiani, F.; Penco, G.; Trovo, M.; /Sincrotrone Trieste; Corlett, J.; Fawley, W.; Lidia, S.; Penn, G.; Ratti, A.; Staples, J.; /LBL, Berkeley /MIT /SLAC

    2005-12-14

    We describe the machine layout and major performance parameters for the FERMI FEL project funded for construction at Sincrotrone Trieste, Italy, within the next five years. The project will be the first user facility based on seeded harmonic cascade FEL's, providing controlled, high peak-power pulses. With a high-brightness rf photocathode gun, and using the existing 1.2 GeV S-band linac, the facility will provide tunable output over a range from {approx}100 nm to {approx}10 nm, with pulse duration from 40 fs to {approx} 1ps, peak power {approx}GW, and with fully variable output polarization. Initially, two FEL cascades are planned; a single-stage harmonic generation to operate > 40 nm, and a two-stage cascade operating from {approx}40 nm to {approx}10 nm or shorter wavelength. The output is spatially and temporally coherent, with peak power in the GW range. Lasers provide modulation to the electron beam, as well as driving the photocathode and other systems, and the facility will integrate laser systems with the accelerator infrastructure, including a state-of-the-art optical timing system providing synchronization of rf signals, lasers, and x-ray pulses. Major systems and overall facility layout are described, and key performance parameters summarized.

  15. Dynamics of a multi-beam photonic free electron laser

    NARCIS (Netherlands)

    Lee, J.H.H.; van Dijk, M.W.; Denis, T.; van der Slot, Petrus J.M.; Boller, Klaus J.

    2012-01-01

    A photonic free-electron laser (pFEL) uses free electrons streaming through a photonic crystal (PhC) to generate tunable coherent radiation. Here, we consider a pFEL driven by a set of three low energy (~ 10 keV), low perveance (< 0.1 μP) electron beams. Using a particle-in- cell code, we numericall

  16. A 4 to 0.1 nm FEL Based on the SLAC Linac

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrini, C.; /UCLA

    2012-06-05

    The author show that using existing electron gun technology and a high energy linac like the one at SLAC, it is possible to build a Free Electron Laser operating around the 4 nm water window. A modest improvement in the gun performance would further allow to extend the FEL to the 0.1 nm region. Such a system would produce radiation with a brightness many order of magnitude above that of any synchrotron radiation source, existing or under construction, with laser power in the multigawatt region and subpicosecond pulse length.

  17. The DarkLight Experiment at the JLab FEL

    Science.gov (United States)

    Fisher, Peter

    2013-10-01

    DarkLight will study the production of gauge bosons associated with Dark Forces theories in the scattering of 100 MeV electrons on proton a target. DarkLight is a spectrometer to measure all the final state particles in e- + p -->e- + p +e- +e+ . QED allows this process and the invariant mass distribution of the e+e- pair is a continuum from nearly zero to nearly the electron beam energy. Dark Forces theories, which allow the dark matter mass scale to be over 1 TeV, predict a gauge boson A' in the mass range of 10-1,000 MeV and decays to an electron-positron pair with an invariant mass of mA'. We aim to search for this process using the 100 MeV, 10 mA electron beam at the JLab Free Electron Laser impinging on a hydrogen target with a 1019 cm-2 density. The resulting luminosity of 6 ×1035/cm2-s gives the experiment enough sensitivity to probe A' couplings of 10-9 α . DarkLight is unique in its design to detect all four particles in the final state. The leptons will be measured in a large high-rate TPC and a silicon sensor will measure the protons. A 0.5 T solenoidal magnetic field provides the momentum resolution and focuses the copious Møller scattering background down the beam line, away from the detectors. A first beam test has shown the FEL beam is compatible with the target design and that the hall backgrounds are manageable. The experiment has been approved by Jefferson Lab for first running in 2017.

  18. Ultrashort pulsed laser treatment inactivates viruses by inhibiting viral replication and transcription in the host nucleus.

    Science.gov (United States)

    Tsen, Shaw-Wei D; Chapa, Travis; Beatty, Wandy; Xu, Baogang; Tsen, Kong-Thon; Achilefu, Samuel

    2014-10-01

    Ultrashort pulsed laser irradiation is a new method for virus reduction in pharmaceuticals and blood products. Current evidence suggests that ultrashort pulsed laser irradiation inactivates viruses through an impulsive stimulated Raman scattering process, resulting in aggregation of viral capsid proteins. However, the specific functional defect(s) in viruses inactivated in this manner have not been demonstrated. This information is critical for the optimization and the extension of this treatment platform to other applications. Toward this goal, we investigated whether viral internalization, replication, or gene expression in cells were altered by ultrashort pulsed laser irradiation. Murine Cytomegalovirus (MCMV), an enveloped DNA virus, was used as a model virus. Using electron and fluorescence microscopy, we found that laser-treated MCMV virions successfully internalized in cells, as evidenced by the detection of intracellular virions, which was confirmed by the detection of intracellular viral DNA via PCR. Although the viral DNA itself remained polymerase-amplifiable after laser treatment, no viral replication or gene expression was observed in cells infected with laser-treated virus. These results, along with evidence from previous studies, support a model whereby the laser treatment stabilizes the capsid, which inhibits capsid uncoating within cells. By targeting the mechanical properties of viral capsids, ultrashort pulsed laser treatment represents a unique potential strategy to overcome viral mutational escape, with implications for combatting emerging or drug-resistant pathogens.

  19. Dual wavelength laser damage mechanisms in the ultra-short pulse regime

    Science.gov (United States)

    Gyamfi, Mark; Costella, Marion; Willemsen, Thomas; Jürgens, Peter; Mende, Mathias; Jensen, Lars; Ristau, Detlev

    2016-12-01

    New ultrashort pulse laser systems exhibit an ever increasing performance which includes shorter pulses and higher pulse energies. Optical components used in these systems are facing increasing requirements regarding their durability, and therefore understanding of the damage mechanism is crucial. In the ultra-short pulse regime electron ionization processes control the damage mechanisms. For the single wavelength, single pulse regime the Keldysh [1] and the Drude model [2] allow a quantitative description of these ionization processes. However, in this model, the electrical field is restricted to a single wavelength, and therefore it cannot be applied in the case of irradiation with two pulses at different wavelengths. As frequency conversion is becoming more common in ultra-short pulse applications, further research is needed in this field to predict the damage resistance of optical components. We investigate the damage behavior of high reflective mirrors made of different metal oxide materials under simultaneous exposure to ultra-short pulses at the wavelengths 387.5 nm and 775 nm, respectively.

  20. Kinetic theory of free electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Hafizi, B. [Naval Research Lab., Washington, DC (United States); Roberson, C.W. [Office of Naval Research, Arlington, VA (United States)

    1995-12-31

    We have developed a relativistic kinetic theory of free electron lasers (FELs). The growth rate, efficiency, filling factor and radius of curvature of the radiation wave fronts are determined. We have used the theory to examine the effects of beam compression on growth rate. The theory has been extended to include self field effects on FEL operation. These effects are particularly important in compact, low voltage FELs. The surprising result is that the self field contribution to the beam quality is opposite to the emittance contribution. Hence self fields can improve beam quality, particularly in compact, low voltage FELs.

  1. Electro-Magnetic Quadrupole Magnets in the LCLS FEL Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Emma, P.

    2005-01-31

    We discuss various aspects of electro-magnetic quadrupole (EMQ) magnets for the LCLS FEL undulator, including their utility in beam-based alignment (BBA), magnet design issues, and impact on tunnel environment, reliability, and cost.

  2. Conceptual design of industrial free electron laser using superconducting accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Saldin, E.L.; Schneidmiller, E.A.; Ulyanov, Yu.N. [Automatic Systems Corporation, Samara (Russian Federation)] [and others

    1995-12-31

    Paper presents conceptual design of free electron laser (FEL) complex for industrial applications. The FEL complex consists of three. FEL oscillators with the optical output spanning the infrared (IR) and ultraviolet (UV) wave-lengths ({lambda} = 0.3...20 {mu}m) and with the average output power 10 - 20 kW. The driving beam for the FELs is produced by a superconducting accelerator. The electron beam is transported to the FELs via three beam lines (125 MeV and 2 x 250 MeV). Peculiar feature of the proposed complex is a high efficiency of the. FEL oscillators, up to 20 %. This becomes possible due to the use of quasi-continuous electron beam and the use of the time-dependent undulator tapering.

  3. R&D for a Soft X-Ray Free Electron Laser Facility

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, John; Attwood, David; Byrd, John; Denes, Peter; Falcone, Roger; Heimann, Phil; Leemans, Wim; Padmore, Howard; Prestemon, Soren; Sannibale, Fernando; Schlueter, Ross; Schroeder, Carl; Staples, John; Venturini, Marco; Warwick, Tony; Wells, Russell; Wilcox, Russell; Zholent, Alexander; Adolphsen, Chris; Arthur, John; Bergmann, Uwe; Cai, Yunhai; Colby, Eric; Dowell, David; Emma, Paul; Fox, John; Frisch, Josef; Galayda, John; Hettel, Robert; Huang, Zhirong; Phinney, Nan; Rabedeau, Tom; Raubenheimer, Tor; Reis, David; Schmerge, John; Stohr, Joachim; Stupakov, Gennady; White, Bill; Xiang, Dao

    2009-06-08

    structure. Demonstration experiments in advanced seeding techniques, such as EEHG, and other optical manipulations to enhance the FEL process are required to reduce technical risk in producing temporally coherent and ultrashort x-ray output using optical seed lasers. Success of EEHG in particular would result in reduced development and cost of laser systems and accelerator hardware for seeded FELs. With a 1.5-2.5 GeV linac, FELs could operate in the VUV-soft x-ray range, where the actual beam energy will be determined by undulator technology; for example, to use the lower energy would require the use of advanced designs for which undulator R&D is needed. Significant reductions in both unit costs and accelerator costs resulting from the lower electron beam energy required to achieve lasing at a particular wavelength could be obtained with undulator development. Characterization of the wakefields of the vacuum chambers in narrow-gap undulators will be needed to minimize risk in ability to deliver close to transform limited pulses. CW superconducting RF technology for an FEL facility with short bunches at MHz rate and up to mA average current will require selection of design choices in cavity frequency and geometry, higher order mode suppression and power dissipation, RF power supply and distribution, accelerating gradient, and cryogenics systems. R&D is needed to define a cost and performance optimum. Developments in laser technology are proceeding at rapid pace, and progress in high-power lasers, harmonic generation, and tunable sources will need to be tracked.

  4. Development of a pump-probe facility with sub-picosecond time resolution combining a high-power ultraviolet regenerative FEL amplifier and a soft X-ray SASE FEL

    CERN Document Server

    Faatz, B; Feldhaus, J; Krzywinski, J; Pflüger, J; Rossbach, J; Saldin, E L; Schneidmiller, E A; Yurkov, M V

    2001-01-01

    This paper presents the conceptual design of a high power radiation source with laser-like characteristics in the ultraviolet spectral range at the TESLA Test Facility (TTF). The concept is based on the generation of radiation in a regenerative FEL amplifier (RAFEL). The RAFEL described in this paper covers a wavelength range of 200-400 nm and provides 200 fs pulses with 2 mJ of optical energy per pulse. The linac operates at 1% duty factor and the average output radiation power exceeds 100 W. The RAFEL will be driven by the spent electron beam leaving the soft X-ray FEL, thus providing minimal interference between these two devices. The RAFEL output radiation has the same time structure as the X-ray FEL and the UV pulses are naturally synchronized with the soft X-ray pulses from the TTF FEL. Therefore, it should be possible to achieve synchronization close to the duration of the radiation pulses (200 fs) for pump-probe techniques using either an UV pulse as a pump and soft X-ray pulse as a probe, or vice ver...

  5. Transient absorption spectroscopy in biology using the Super-ACO storage ring FEL and the synchrotron radiation combination

    CERN Document Server

    Renault, E; De Ninno, G; Garzella, D; Hirsch, M; Nahon, L; Nutarelli, D

    2001-01-01

    The Super-ACO storage ring FEL, covering the UV range down to 300 nm with a high average power (300 mW at 350 nm) together with a high stability and long lifetime, is a unique tool for the performance of users applications. We present here the first pump-probe two color experiments on biological species using a storage ring FEL coupled to the synchrotron radiation. The intense UV pulse of the Super-ACO FEL is used to prepare a high initial concentration of chromophores in their first singlet electronic excited state. The nearby bending magnet synchrotron radiation provides, on the other hand a pulsed, white light continuum (UV-IR), naturally synchronized with the FEL pulses and used to probe the photochemical subsequent events and the associated transient species. We have demonstrated the feasibility with a dye molecule (POPOP) observing a two-color effect, signature of excited state absorption and a temporal signature with Acridine. Applications on various chromophores of biological interest are carried out,...

  6. Optimization of the LCLS X-Rray FEL Output Performance in the Presence of Strong Undulator Wakefields

    CERN Document Server

    Reiche, Sven; Emma, Paul; Fawley, William M; Huang, Zhirong; Nuhn, Heinz-Dieter; Stupakov, Gennady

    2005-01-01

    The Linac Coherent Light Source (LCLS) Free-Electron Laser will operate in the wavelength range of 1.5 to 15 Angstroms. Energy loss due to wakefields within the long undulator can degrade the FEL process by detuning the resonant FEL frequency. The wakefields arise from the vacuum chamber wall resistivity, its surface roughness, and abrupt changes in its aperture. For LCLS parameters, the resistive component is the most critical and depends upon the chamber material (e.g. Cu) and its radius. To study the expected performance in the presence of these wakefields, we make a series of "start-to-end" simulations with tracking codes PARMELA and ELEGANT and time-dependent FEL simulation codes Genesis 1.3 and Ginger. We discuss the impact of the wakefield on output energy, spectral bandwidth, and temporal envelope of the output FEL pulse, as well as the benefits of a partial compensation obtained with a slight z dependent taper in the undulator field. We compare these results to those obtained by decreasing the bunch ...

  7. Experimental results of a sheet-beam, high power, FEL amplifier with application to magnetic fusion research

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, S.; Destler, W.W.; Granatstein, V.L. [Univ. of Maryland, College Park, MD (United States)] [and others

    1995-12-31

    The experimental study of sheet-beam FELs as candidate millimeter-wave sources for heating magnetic fusion plasmas has achieved a major milestone. In a proof-of-principle, pulsed experiment, saturated FEL amplifier operation was achieved with 250 kW of output power at 86 GHz. Input microwave power was 1 kW, beam voltage was 450 kV and beam current was 17 A. The planar wiggler had a peak value of 3.8 kG, a period of 0.96 cm and was 71 cm long. The linear gain of 30 dB, saturated gain of 24 dB and saturated efficiency of 3% all are in good agreement with theoretical prediction. Follow-on work would include development of a thermionic sheet-beam electron-gun compatible with CW FEL operation, adding a section of tapered wiggler to increase the output power to levels in excess of 1 megawatt, and increasing the FEL frequency.

  8. Element Selective Probe of the Ultra-Fast Magnetic Response to an Element Selective Excitation in Fe-Ni Compounds Using a Two-Color FEL Source

    Directory of Open Access Journals (Sweden)

    Eugenio Ferrari

    2017-01-01

    Full Text Available The potential of the two-color mode implemented at the FERMI free-electron laser (FEL source for pumping and probing selectively different atomic species has been demonstrated by time-resolved scattering experiments with permalloy (FeNi alloy and NiFe2O4 samples. We monitored the ultra-fast demagnetization of Ni induced by the pump FEL pulse, by tuning the linearly-polarized FEL probe pulse to the Ni-3p resonance and measuring the scattered intensity in the transverse magneto-optical Kerr effect geometry. The measurements were performed by varying the intensity of the FEL pump pulse, tuning its wavelength to and off of the Fe-3p resonance, and by spanning the FEL probe pulse delays across the 300–900 fs range. The obtained results have evidenced that for the case of NiFe2O4, there is a sensible difference in the magnetic response at the Ni site when the pump pulse causes electronic excitations at the Fe site.

  9. Black-hole evaporation and ultrashort distances

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, T. (Department of Physics, University of Maryland, College Park, Maryland (USA))

    1991-09-15

    The role played by ultrahigh frequencies of ultrashort distances in the usual derivations of the Hawking effect is discussed and criticized. The question would a blackhole radiate if there were a Planck scale cutoff in the rest frame of the hole '' is posed. Guidance is sought from Unruh's fluid-flow analogue of black-hole radiation, by taking into account the atomic nature of the fluid. Two arguments for black-hole radiation are given which assume a Planck length cutoff. One involves the response of static accelerated detectors outside the horizon, and the other involves conservation of the expectation value of the stress tensor. Neither argument is conclusive, but they do strongly suggest that, in spite of reasonable doubt about the usual derivations of black-hole radiation, a safe'' derivation which avoids our ignorance of ultrashort-distance physics can likely be formulated. Remaining open questions are discussed.

  10. Propagation of ultrashort pulsed beams in dispersive media

    Institute of Scientific and Technical Information of China (English)

    刘志军; 吕百达

    2003-01-01

    Starting from the Rayleigh diffraction integral, the propagation equation of ultrashort pulsed beams in dispersive media is derived without making the paraxial approximation and slowly varying envelope approximation (SVEA). The spatiotemporal properties of ultrashort pulsed beams in dispersive media, such as spectrum redshifting, narrowing and pulse distortion are illustrated with pulsed Gaussian beams. It is stressed that the "antibeam" behaviour of ultrashort pulsed beams can be avoided, if a suitable truncation function is chosen.

  11. Production of color centers in PMMA by ultrashort laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Elgul Samad, Ricardo, E-mail: resamad@gmail.co [Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, Av. Prof. Lineu Prestes 2242, Cidade universitaria 05508-000, Sao Paulo, SP (Brazil); Coronato Courrol, Lilia [Departamento de Ciencias Exatas e da Terra, UNIFESP, Diadema, SP (Brazil); Benevolo Lugao, Ademar; Zanardi Freitas, Anderson de; Dias Vieira, Nilson [Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, Av. Prof. Lineu Prestes 2242, Cidade universitaria 05508-000, Sao Paulo, SP (Brazil)

    2010-03-15

    We report here the creation of color centers in commercial, transparent PMMA samples by ultrashort pulses from a Ti:Sapphire laser emitting at 800 nm, with spatial control. Although the 800 nm photon energy is not sufficient to ionize the polymer, the centers are created following a multiphotonic absorption that causes the ionization. We propose that the free electrons quivering motion on the pulse electric field displaces atoms from its equilibrium positions, creating free radicals and double bonds that coalesce into color centers. The absorption and emission spectra of the centers were measured, but a dose-like curve could not be built due to the presence of damages created along with the centers that scatter the excitation and emission lights due to the commercial sample's poor optical quality.

  12. Ultrashort-pulse laser excitation and damage of dielectric materials

    DEFF Research Database (Denmark)

    Haahr-Lillevang, Lasse; Balling, Peter

    2015-01-01

    Ultrashort-pulse laser excitation of dielectrics is an intricate problem due to the strong coupling between the rapidly changing material properties and the light. In the present paper, details of a model based on a multiple-rate-equation description of the conduction band are provided. The model...... is verified by comparison with recent experimental measurements of the transient optical properties in combination with ablation-depth determinations. The excitation process from the first creation of conduction-band electrons at low intensities to the formation of a highly-excited plasma and associated...... material fragmentation is explained by the model. For quartz samples, the optical properties are strongly influenced by self-trapped excitons, and the associated additions to the model are described....

  13. Ultrashort Laser Pulse Heating of Nanoparticles: Comparison of Theoretical Approaches

    Directory of Open Access Journals (Sweden)

    Renat R. Letfullin

    2008-01-01

    Full Text Available The interaction between nanoparticles and ultrashort laser pulses holds great interest in laser nanomedicine, introducing such possibilities as selective cell targeting to create highly localized cell damage. Two models are studied to describe the laser pulse interaction with nanoparticles in the femtosecond, picosecond, and nanosecond regimes. The first is a two-temperature model using two coupled diffusion equations: one describing the heat conduction of electrons, and the other that of the lattice. The second model is a one-temperature model utilizing a heat diffusion equation for the phonon subsystem and applying a uniform heating approximation throughout the particle volume. A comparison of the two modeling strategies shows that the two-temperature model gives a good approximation for the femtosecond mode, but fails to accurately describe the laser heating for longer pulses. On the contrary, the simpler one-temperature model provides an adequate description of the laser heating of nanoparticles in the femtosecond, picosecond, and nanosecond modes.

  14. Generation of powerful ultrashort electromagnetic pulses based on superradiance

    CERN Document Server

    Ginzburg, N S; Novozhilova, Y V; Sergeev, A S; Phelps, A D R; Cross, A W; Wiggins, S M; Ronald, K; Shpak, V G; Yalandin, M I; Shunailov, S A; Ulmaskulov, M R

    2001-01-01

    Experimental results of the observation of superradiation from intense, subnanosecond electron bunches moving through a periodic waveguide and interacting with a backward propagating TM sub 0 sub 1 wave are presented. The ultra-short microwave pulses in Ka, W, and G band were generated with repetition frequencies of up to 25 Hz. Observation of RF breakdown of ambient air, as well as direct measurements by hot-carrier germanium detectors, leads to an estimate of the peak power as high as 60-120 MW for the 300-400 ps pulses at 38 GHz. The initial observation of 75 GHz 10-15 MW radiation pulses with duration less than 150 ps, and of 150 GHz microwave spikes with a risetime of 75ps are also reported. Comparison with simulations is discussed as well.

  15. A Far-Infrared FEL for the Radiation Source ELBE

    CERN Document Server

    Seidel, W; Lehnert, U; Michel, P; Schlenk, R; Willkommen, U; Wohlfarth, D; Wünsch, R

    2005-01-01

    After successfully commissioning the mid-infrared FEL (U27) and adjoining a second accelerator unit (up to 35 MeV) at ELBE we have modified our plan how to produce radiation in the far infrared.To ensure the continuous variation of the wavelength up to 150 microns we want to complement the U27 undulator by a permanent magnet undulator with a period of 100 mm (U100). The minimum gap of 24 mm and the hybrid construction consisting of Sm/Co magnets and soft iron poles ensures sufficient radiation resistance and allows rms undulator parameters up to 2.7. The large field variation allows us to cover the whole wavelength range by only two different electron energies (e.g. 20 and 35 MeV). To reduce the transverse beam size we use a partial waveguide which is 10 mm high and wide enough to allow free propagation in horizontal direction. It spans from the last quadrupole in front of the undulator up to the downstream mirror and is somewhat longer than 8 m. To minimize the coupling losses between free propagation and th...

  16. Ultrashort Laser Retinal Damage Threshold Mechanisms

    Science.gov (United States)

    2010-01-15

    Strickland and Mourou [1] introduced a technique called ‘‘chirped pulse amplification’’ to produce ultrashort laser pulses with extraordinary peak powers...photocoagula- tion of the retinal layers as had been seen in longer exposure studies. Thompson et al. [22] examined in detail the thermal response of...Gewebeveränderungen. Schlüsselwörter: Ultrakurz; Retina; Sicherheit; Femtosekunde; Melanin; Laserinduzierter Durchbruch; Ultraschnell References [1] Strickland D

  17. Ionization of molecular hydrogen in ultrashort intense laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Vanne, Yulian V.

    2010-03-18

    A novel ab initio numerical approach is developed and applied that solves the time-dependent Schroedinger equation describing two-electron diatomic molecules (e.g. molecular hydrogen) exposed to an intense ultrashort laser pulse. The method is based on the fixed-nuclei and the non-relativistic dipole approximations and aims to accurately describe both correlated electrons in full dimensionality. The method is applicable for a wide range of the laser pulse parameters and is able to describe both few-photon and many-photon single ionization processes, also in a non-perturbative regime. A key advantage of the method is its ability to treat the strong-field response of the molecules with arbitrary orientation of the molecular axis with respect to the linear-polarized laser field. Thus, this work reports on the first successful orientation-dependent analysis of the multiphoton ionization of H{sub 2} performed by means of a full-dimensional numerical treatment. Besides the investigation of few-photon regime, an extensive numerical study of the ionization by ultrashort frequency-doubled Ti:sapphire laser pulses (400 nm) is presented. Performing a series of calculations for different internuclear separations, the total ionization yields of H{sub 2} and D{sub 2} in their ground vibrational states are obtained for both parallel and perpendicular orientations. A series of calculations for 800 nm laser pulses are used to test a popular simple interference model. Besides the discussion of the ab initio numerical method, this work considers different aspects related to the application of the strong-field approximation (SFA) for investigation of a strong-field response of an atomic and molecular system. Thus, a deep analysis of the gauge problem of SFA is performed and the quasistatic limit of the velocity-gauge SFA ionization rates is derived. The applications of the length-gauge SFA are examined and a recently proposed generalized Keldysh theory is criticized. (orig.)

  18. Investigation of Early Plasma Evolution Induced by Ultrashort Laser Pulses

    Science.gov (United States)

    Hu, Wenqian; Shin, Yung C.; King, Galen B.

    2012-01-01

    Early plasma is generated owing to high intensity laser irradiation of target and the subsequent target material ionization. Its dynamics plays a significant role in laser-material interaction, especially in the air environment1-11. Early plasma evolution has been captured through pump-probe shadowgraphy1-3 and interferometry1,4-7. However, the studied time frames and applied laser parameter ranges are limited. For example, direct examinations of plasma front locations and electron number densities within a delay time of 100 picosecond (ps) with respect to the laser pulse peak are still very few, especially for the ultrashort pulse of a duration around 100 femtosecond (fs) and a low power density around 1014 W/cm2. Early plasma generated under these conditions has only been captured recently with high temporal and spatial resolutions12. The detailed setup strategy and procedures of this high precision measurement will be illustrated in this paper. The rationale of the measurement is optical pump-probe shadowgraphy: one ultrashort laser pulse is split to a pump pulse and a probe pulse, while the delay time between them can be adjusted by changing their beam path lengths. The pump pulse ablates the target and generates the early plasma, and the probe pulse propagates through the plasma region and detects the non-uniformity of electron number density. In addition, animations are generated using the calculated results from the simulation model of Ref. 12 to illustrate the plasma formation and evolution with a very high resolution (0.04 ~ 1 ps). Both the experimental method and the simulation method can be applied to a broad range of time frames and laser parameters. These methods can be used to examine the early plasma generated not only from metals, but also from semiconductors and insulators. PMID:22806170

  19. High-Order Temporal Corrected Fields of Ultra-Short Laser Pulses and Laser-Driven Acceleration

    Institute of Scientific and Technical Information of China (English)

    XIE Yong-Jie; HUO Yu-Kun; KONG Qing; WANG Ping-Xiao; CHEN Zhao; LIU Jing-Ru

    2006-01-01

    @@ Up to third-order temporal correction in terms of a small dimensionless temporal parameter ε = 1/(ω0t0) (ω0 =ck0 the central oscillatory frequency, t0 the pulse duration of half period), the field expressions of ultra-short focused laser pulses are explicitly presented. To evaluate the correction efficacy, electric amplitudes of zeroth-order and higher-order corrected fields are compared for different pulse durations. Furthermore, electron interaction with ultra-short laser pulses is simulated using both the zeroth-order and higher-order corrected field equations.

  20. LIGHT SOURCE: Terahertz emission in tenuous gases irradiated by ultrashort laser pulses

    Science.gov (United States)

    Wang, Wei-Min; Sheng, Zheng-Ming; Wit, Hui-Chun; Chen, Min; Li, Chun; Zhang, Jie; Mima, K.

    2009-06-01

    Mechanism of terahertz (THz) pulse generation in gases irradiated by ultrashort laser pulses is investigated theoretically. Quasi-static transverse currents produced by laser field ionization of gases and the longitudinal modulation in formed plasmas are responsible for the THz emission at the electron plasma frequency, as demonstrated by particle-in-cell simulations including field ionization. The THz field amplitude scaling with the laser amplitude within a large range is also discussed.

  1. Three-dimensional Simulation of Thermal Harmonic Lasing FEL with Detuning of the Fundamental

    CERN Document Server

    Salehi, Elham; Mirian, Najmeh Sadat

    2016-01-01

    Detuning of the fundamental is a way to enhance harmonic generation . By this method, the wiggler is composed of two segments in such a way that the fundamental resonance of the second segment to coincide with the third harmonic of the first segment of the wiggler to generate extreme ultraviolet radiation and x-ray emission. A set of coupled, nonlinear, and first-order differential equations in three dimensions describing the evolution of the electron trajectories and the radiation field with warm beam is solved numerically by CYRUS 3D code in the steady-state for two models (1) seeded free electron laser (FEL) and (2) shot noise on the electron beam (self-amplified spontaneous emission FEL). Thermal effects in the form of longitudinal velocity spread is considered. Three-dimensional simulation describes self-consistently the longitudinal spatial dependence of radiation waists, curvatures, and amplitudes together with the evaluation of the electron beam. The evolutions of the transverse modes are investigated...

  2. Sub-Terawatt Mode of Operation of X-ray SASE FEL

    CERN Document Server

    Saldin, Evgeny L; Yurkov, Mikhail V

    2004-01-01

    Application of dispersion section in combination with undulator tapering is an effective tool for achieving extremely high output power of XFEL. In the first part of the undulator the gap is fixed, and amplification process is developed as in usual SASE FEL. When energy modulation of the electron beam becomes to be comparable with local energy spread, the electron bunch passes via dispersion section resulting in an effective compression of the electron bunch. Then bunched electron beam enters the second half of the undulator where the gap is tapered for effective extraction of the energy from the electron bunch. Our studies shows that output radiation power can reach a sub-TW level in Angstrom wavelength range.

  3. Prompt pre-thermal laser ion sheath acceleration with ultra-short laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Zeil, Karl; Bussmann, Michael; Cowan, Thomas; Kluge, Thomas; Kraft, Stephan; Metzkes, Josefine; Schramm, Ulrich [Helmholtz-Zentrum Dresden-Rossendorf (Germany)

    2013-07-01

    Recent laser-ion acceleration experiments performed at the 150 TW Draco laser in Dresden, Germany, have demonstrated the importance of a precise understanding of the electron dynamics in solids on an ultra-short time scale. For example, with ultra-short laser pulses a description based purely on the evolution of a thermal electron ensemble, as in standard TNSA models, is not sufficient anymore. Rather, non-thermal effects during the ultra-short intra-pulse phase of laser-electron interaction in solids become important for the acceleration of ions when the laser pulse duration is in the order of only a few tens of femtoseconds. While the established maximum ion energy scaling in the TNSA regime goes with the square root of the laser intensity, for such ultra short pulse durations the maximum ion energy is found to scale linear with laser intensity, motivating the interest in such laser systems. Investigating the influence of laser pulse contrast, laser polarization and laser incidence angle on the proton maximum energy and angular distribution, we present recent advances in the description of the laser interaction with solids, focusing on the implications of intra-pulse non-thermal phenomena on the ion acceleration.

  4. Optimization Issues in a Harmonic Cascade FEL

    CERN Document Server

    De Ninno, G

    2005-01-01

    Presently there is significant interest by multiple groups (e.g. BNL, ELETTRA, LBNL, BESSY, MIT) to reach short output wavelengths via a harmonic cascade FEL using an external seed laser. In a multistage device, there are a number of "free" parameters such as the nominal power of the input seed, the lengths of the individual modulator and radiator undulators, the strengths (i.e. the R56's) of the dispersive sections, the choice of the actual harmonic numbers to reach a given wavelength, etc., whose optimization is a non-trivial exercise. In particular, one can choose whether to operate predominantly in the "high gain" regime such as was proposed by Yu [1] in which case each radiator undulator is many gain lengths long or, alternatively, in the "low gain" regime in which case all undulators (except possibly the last radiator) are a couple gain lengths or less long and the output from each radiator essentially corresponds to coherent spontaneous emission from a pre-bunched beam. With particular emphasis upon th...

  5. Design of energy-recovery transport for the JAERI FEL driven by a superconducting linac

    CERN Document Server

    Hajima, R; Nagai, R; Kikuzawa, N; Nishimori, N; Shizuma, T; Minehara, E J; Vinokurov, N A

    2000-01-01

    A high-average power free-electron laser driven by a superconducting linac has been developed in Japan Atomic Energy Research Institute (JAERI), and stable laser output over 0.1 kW in infrared region is now available. For further increasing of FEL output power, installing energy-recovery transport has been planned. The lattice design for the energy-recovery transport is discussed in the present paper. It is found that a recirculation transport, which fulfills the requirements for energy acceptance and isochronicity, can be realized by adding another triple-bend arc to the existing beam line.

  6. Component technologies for a recirculating linac free-electron laser

    Science.gov (United States)

    Litvinenko, Vladimir N.; Madey, John M. J.; Vinokurov, Nikolai A.

    1994-05-01

    The key component technologies required for a high average power free-electron laser (FEL) are described. Some basic aspects of approaches for high average power (scalable to megawatt level) accelerators and FELs are presented. A short description of the Novosibirsk 100 kW average power near infrared (IR) FEL driven by a race-track microtron-recuperator is given. The current status and plans for this facility are provided by Institute of Nuclear Physics (Novosibirsk).

  7. Calibration status and plans for the charge integrating JUNGFRAU pixel detector for SwissFEL

    Science.gov (United States)

    Redford, S.; Bergamaschi, A.; Brückner, M.; Cartier, S.; Dinapoli, R.; Ekinci, Y.; Fröjdh, E.; Greiffenberg, D.; Mayilyan, D.; Mezza, D.; Mozzanica, A.; Rajeev, R.; Ramilli, M.; Ruder, C.; Schädler, L.; Schmitt, B.; Shi, X.; Thattil, D.; Tinti, G.; Zhang, J.

    2016-11-01

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector under development for photon science applications at free electron laser and synchrotron facilities. In particular, JUNGFRAU detectors will equip the Aramis end stations of SwissFEL, an X-ray free electron laser currently under construction at the Paul Scherrer Institut in Villigen, Switzerland. JUNGFRAU has been designed specifically to meet the challenges of photon science at XFELs, including high frame rates, single photon sensitivity in combination with a high dynamic range, vacuum compatibility and tilable modules. This has resulted in a charge integrating detector with three dynamically adjusting gains, a low noise of 55 ENC RMS, readout speeds in excess of 2 kHz, single photon sensitivity down to 2 keV (with a signal to noise ratio of 10) and a dynamic range covering four orders of magnitude at 12 keV. Each JUNGFRAU module consists of eight chips of 256 × 256 pixels, each 75 × 75 μm2 in size. The chips are arranged in 2 × 4 formation and bump-bonded to a single silicon sensor 320 μm thick, resulting in an active area of approximately 4 × 8 cm2 per module. Multi-module vacuum compatible systems comprising up to 16 Mpixels (32 modules) will be used at SwissFEL. The design of SwissFEL and the JUNGFRAU system for the Aramis end station A will be introduced, together with results from early prototypes and a characterisation using the first batch of final JUNGFRAU modules. Plans and first results of the pixel-by-pixel calibration will also be shown. The vacuum compatibility of the JUNGFRAU module is demonstrated for the first time.

  8. FAST: a three-dimensional time-dependent FEL simulation code

    CERN Document Server

    Saldin, E L; Yurkov, M V

    1999-01-01

    In this report we briefly describe the three-dimensional, time-dependent FEL simulation code FAST. The equations of motion of the particles and Maxwell's equations are solved simultaneously taking into account the slippage effect. Radiation fields are calculated using an integral solution of Maxwell's equations. A special technique has been developed for fast calculations of the radiation field, drastically reducing the required CPU time. As a result, the developed code allows one to use a personal computer for time-dependent simulations. The code allows one to simulate the radiation from the electron bunch of any transverse and longitudinal bunch shape; to simulate simultaneously an external seed with superimposed noise in the electron beam; to take into account energy spread in the electron beam and the space charge fields; and to simulate a high-gain, high-efficiency FEL amplifier with a tapered undulator. It is important to note that there are no significant memory limitations in the developed code and an...

  9. Emittance measurements and minimization at the SwissFEL Injector Test Facility

    Directory of Open Access Journals (Sweden)

    Eduard Prat

    2014-10-01

    Full Text Available The emittance of the electron beam is crucial for Free-Electron Laser facilities: it has a strong influence on the lasing performance and on the total length of the accelerator. We present our procedure to measure and minimize the projected and slice emittance at the SwissFEL Injector Test Facility. The normalized slice emittance resolution achieved is about 3 nm and the longitudinal resolution is about 13 fs, with measurement errors estimated to be below 5%. After performing a full optimization we have obtained, for uncompressed beams, a slice emittance of about 200 nm for a beam charge of 200 pC, and a slice emittance of about 100 nm for 10 pC. These values are consistent with our simulations and are well below the requirements of the SwissFEL under construction at the Paul Scherrer Institute. At these bunch charges our measured slice emittances are, to our knowledge, the lowest reported so far for an electron linear accelerator.

  10. Performance of an undulator for visible and UV FELs at FELI

    Energy Technology Data Exchange (ETDEWEB)

    Miyauchi, Y.; Zako, A.; Koga, A. [Free Electron Laser Research Institute, Inc., Osaka (Japan)] [and others

    1995-12-31

    Two infrared free electron lasers (FELs) of the FELI project are now operating in the wavelength range of 1-20{mu}m. A 2.68-m undulator has been constructed for visible and UV FELs covering the wavelength of 1-0.2{mu}m for 100-165 MeV electron beams. It generates alternating, horizontal magnetic field, and wiggles electron beam on a vertical plane. The undulator length and period are 2.68m and 40mm, respectively. The gap of undulator magnets can be changed remotely by using servomotors with an accuracy of 1 {mu}m from the control room. The maximum K-value and related magnetic field strength are 1.9 and 0.5T, respectively, when its gap is set to the minimum value of 16mm. In order to minimize magnetic field reduction due to radiation damage, Sm-Co permanent magnet was adopted. Its structure and the results of magnetic field measurement will be reported.

  11. Design and installation of a low particulate, ultrahigh vacuum system for a high power free-electron laser

    CERN Document Server

    Dyll, Aa; Feldl, E; Parkinson, J; Preble, J; Siggins, T; Williams, S; Wisema, M

    1999-01-01

    A high-average power (kW) infrared (IR) free-electron laser (FEL) is currently being commissioned for the Jefferson Laboratory FEL User Facility. The IR FEL is driven by a unique superconducting rf linac which is recirculated to recover electron beam power that is not radiated in the FEL. The design and installation of the vacuum system for the FEL involved particular attention to minimizing particulate contamination which could cause problems with the superconducting acceleration cavities and the high power FEL optics. Particulate contamination levels of all vacuum components were monitored during the cleaning process using laser scattering. Cleaning, transport, and installation procedures were developed to minimize the contamination of the complete system. We will summarize a data base we compiled of particulate contamination levels of the various components installed in the FEL vacuum system.

  12. Upgrade of the L-Band Linac at ISIR, Osaka University for a Far-Infrared FEL

    CERN Document Server

    Kato, Ryukou; Kashiwagi, Shigeru; Suemine, Shoji; Yamamoto, Tamotsu

    2004-01-01

    We are developing the far-infrared free-electron laser (FEL) using the L-band electron linac at the Institute of Scientific and Industrial Research (ISIR), Osaka University. The first lasing of the FEL was obtained at wavelengths from 32 to 40 μm in 1994, and the wavelength region has been extended up to 150 μm. The linac was designed and constructed for producing the high-intensity single-bunch beam for pulse radiolysis, so that the filling time of the accelerating structure is 1.8 μs long and the maximum macropulse length of the electron beam is limited to 2 μs, though the duration of the RF pulse can be extended to 4 μs. As a result, the FEL could not reach power saturation because the number of amplification times was limited. Recently, the linac has been extensively remodeled to realize high operational stability and reproducibility for advanced studies in beam science and technology. Almost all the peripheral components are replaced with new ones. At this opportunity, ...

  13. Modification of transparent materials with ultrashort laser pulses: What is energetically and mechanically meaningful?

    Energy Technology Data Exchange (ETDEWEB)

    Bulgakova, Nadezhda M., E-mail: nadezhda.bulgakova@hilase.cz [HiLASE Centre, Institute of Physics ASCR, Za Radnicí 828, 25241 Dolní Břežany (Czech Republic); Institute of Thermophysics SB RAS, 1 Lavrentyev Ave., 630090 Novosibirsk (Russian Federation); Zhukov, Vladimir P. [Institute of Computational Technologies SB RAS, 6 Lavrentyev Ave., 630090 Novosibirsk (Russian Federation); Novosibirsk State Technical University, 20 Karl Marx Ave., 630073, Novosibirsk (Russian Federation); Sonina, Svetlana V. [Novosibirsk State University, 1 Koptuga Ave., 630090 Novosibirsk (Russian Federation); Meshcheryakov, Yuri P. [Design and Technology Branch of Lavrentyev Institute of Hydrodynamics SB RAS, Tereshkovoi street 29, 630090 Novosibirsk (Russian Federation)

    2015-12-21

    A comprehensive analysis of laser-induced modification of bulk glass by single ultrashort laser pulses is presented which is based on combination of optical Maxwell-based modeling with thermoelastoplastic simulations of post-irradiation behavior of matter. A controversial question on free electron density generated inside bulk glass by ultrashort laser pulses in modification regimes is addressed on energy balance grounds. Spatiotemporal dynamics of laser beam propagation in fused silica have been elucidated for the regimes used for direct laser writing in bulk glass. 3D thermoelastoplastic modeling of material relocation dynamics under laser-induced stresses has been performed up to the microsecond timescale when all motions in the material decay. The final modification structure is found to be imprinted into material matrix already at sub-nanosecond timescale. Modeling results agree well with available experimental data on laser light transmission through the sample and the final modification structure.

  14. Ablation enhancement of silicon by ultrashort double-pulse laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Xin; Shin, Yung C. [Center for Laser-Based Manufacturing, School of Mechanical Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)

    2014-09-15

    In this study, the ultrashort double-pulse ablation of silicon is investigated. An atomistic simulation model is developed to analyze the underlying physics. It is revealed that the double-pulse ablation could significantly increase the ablation rate of silicon, compared with the single pulse ablation with the same total pulse energy, which is totally different from the case of metals. In the long pulse delay range (over 1 ps), the enhancement is caused by the metallic transition of melted silicon with the corresponding absorption efficiency. At ultrashort pulse delay (below 1 ps), the enhancement is due to the electron excitation by the first pulse. The enhancement only occurs at low and moderate laser fluence. The ablation is suppressed at high fluence due to the strong plasma shielding effect.

  15. Modification of transparent materials with ultrashort laser pulses: What is energetically and mechanically meaningful?

    Science.gov (United States)

    Bulgakova, Nadezhda M.; Zhukov, Vladimir P.; Sonina, Svetlana V.; Meshcheryakov, Yuri P.

    2015-12-01

    A comprehensive analysis of laser-induced modification of bulk glass by single ultrashort laser pulses is presented which is based on combination of optical Maxwell-based modeling with thermoelastoplastic simulations of post-irradiation behavior of matter. A controversial question on free electron density generated inside bulk glass by ultrashort laser pulses in modification regimes is addressed on energy balance grounds. Spatiotemporal dynamics of laser beam propagation in fused silica have been elucidated for the regimes used for direct laser writing in bulk glass. 3D thermoelastoplastic modeling of material relocation dynamics under laser-induced stresses has been performed up to the microsecond timescale when all motions in the material decay. The final modification structure is found to be imprinted into material matrix already at sub-nanosecond timescale. Modeling results agree well with available experimental data on laser light transmission through the sample and the final modification structure.

  16. A high-average-power FEL for industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Dylla, H.F.; Benson, S.; Bisognano, J.

    1995-12-31

    CEBAF has developed a comprehensive conceptual design of an industrial user facility based on a kilowatt UV (150-1000 nm) and IR (2-25 micron) FEL driven by a recirculating, energy-recovering 200 MeV superconducting radio-frequency (SRF) accelerator. FEL users{endash}CEBAF`s partners in the Laser Processing Consortium, including AT&T, DuPont, IBM, Northrop-Grumman, 3M, and Xerox{endash}plan to develop applications such as polymer surface processing, metals and ceramics micromachining, and metal surface processing, with the overall effort leading to later scale-up to industrial systems at 50-100 kW. Representative applications are described. The proposed high-average-power FEL overcomes limitations of conventional laser sources in available power, cost-effectiveness, tunability and pulse structure. 4 refs., 3 figs., 2 tabs.

  17. Antimalarial Activity of Ultra-Short Peptides

    Directory of Open Access Journals (Sweden)

    María Yolanda Rios

    2009-12-01

    Full Text Available Ultra-short peptides 1-9 were designed and synthesized with phenylalanine, ornithine and proline amino acid residues and their effect on antimalarial activity was analyzed. On the basis of the IC50 data for these compounds, the effects of nature, polarity, and amino acid sequence on Plasmodium berghei schizont cultures were analyzed too. Tetrapeptides Phe-Orn-Phe-Orn (4 and Lys-Phe-Phe-Orn (5 showed a very important activity with IC50 values of 3.31 and 2.57 μM, respectively. These two tetrapeptides are candidates for subsequent in vivo assays and SARS investigations.

  18. Intense ultrashort terahertz pulses: generation and applications

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Matthias C [Max Planck Research Department for Structural Dynamics, University of Hamburg, CFEL, 22607 Hamburg (Germany); Fueloep, Jozsef Andras, E-mail: matthias.c.hoffmann@mpsd.cfel.de, E-mail: fulop@fizika.ttk.pte.hu [Department of Experimental Physics, University of Pecs, Ifjusag u. 6, 7624 Pecs (Hungary)

    2011-03-02

    Ultrashort terahertz pulses derived from femtosecond table-top sources have become a valuable tool for time-resolved spectroscopy during the last two decades. Until recently, the pulse energies and field strengths of these pulses have been generally too low to allow for the use as pump pulses or the study of nonlinear effects in the terahertz range. In this review article we will describe methods of generation of intense single cycle terahertz pulses with emphasis on optical rectification using the tilted-pulse-front pumping technique. We will also discuss some applications of these intense pulses in the emerging field of nonlinear terahertz spectroscopy. (topical review)

  19. Gain enhancement in a two-frequency high-gain waveguide free-electron laser

    CERN Document Server

    Lefèvre, T; Rullier, J L; Gouard, P; Donohue, J T

    2002-01-01

    In a waveguide monomode free-electron laser (FEL), two resonant frequencies can be amplified by the electron beam. At the CEA/CESTA facility, single-pass high-gain FEL experiments have been performed over the last five years using relativistic electron beams provided by induction linacs. Most of the work was done in the amplifier regime (at the higher frequency) with the aim of producing a 35 GHz bunched beam. However, super-radiant measurements were also made and have shown that the FEL gain at the upper frequency is higher than in the amplifier regime and may be driven by the lower frequency FEL interaction.

  20. First operation of a harmonic lasing self-seeded free electron laser

    Energy Technology Data Exchange (ETDEWEB)

    Schneidmiller, E.A.; Faatz, B.; Kuhlmann, M.; Roensch-Schulenburg, J.; Schreiber, S.; Tischer, M.; Yurkov, M.V.

    2016-12-15

    Harmonic lasing is a perspective mode of operation of X-ray FEL user facilities that allows to provide brilliant beams of higher energy photons for user experiments. Another useful application of harmonic lasing is so called Harmonic Lasing Self-Seeded Free Electron Laser (HLSS FEL) that allows to improve spectral brightness of these facilities. In the past, harmonic lasing has been demonstrated in the FEL oscillators in infrared and visible wavelength ranges, but not in high-gain FELs and not at short wavelengths. In this paper we report on the first evidence of the harmonic lasing and the first operation of the HLSS FEL at the soft X-ray FEL user facility FLASH in the wavelength range between 4.5 nm and 15 nm. Spectral brightness was improved in comparison with Self-Amplified Spontaneous emission (SASE) FEL by a factor of six in the exponential gain regime. A better performance of HLSS FEL with respect to SASE FEL in the post-saturation regime with a tapered undulator was observed as well. The first demonstration of harmonic lasing in a high-gain FEL and at short wavelengths paves the way for a variety of applications of this new operation mode in X-ray FELs.

  1. First operation of a harmonic lasing self-seeded free electron laser

    Directory of Open Access Journals (Sweden)

    E. A. Schneidmiller

    2017-02-01

    Full Text Available Harmonic lasing is a possible mode of operation of X-ray FEL user facilities that allows us to provide brilliant beams of higher energy photons for user experiments. Another useful application of harmonic lasing is the so-called harmonic lasing self-seeded free electron laser (HLSS FEL that allows the improvement of spectral brightness of these facilities. In the past, harmonic lasing has been demonstrated in the FEL oscillators in infrared and visible wavelength ranges, but not in high-gain FELs and not at short wavelengths. In this paper we report on the first evidence of the harmonic lasing and the first operation of the HLSS FEL at the soft X-ray FEL user facility FLASH in the wavelength range between 4.5 nm and 15 nm. Spectral brightness was improved in comparison with self-amplified spontaneous emission (SASE FEL by a factor of six in the exponential gain regime. A better performance of HLSS FEL with respect to SASE FEL in the post-saturation regime with a tapered undulator was observed as well. The first demonstration of harmonic lasing in a high-gain FEL and at short wavelengths paves the way for a variety of applications of this new operation mode in X-ray FELs.

  2. Medical free-electron laser: fact or fiction?

    Science.gov (United States)

    Bell, James P.; Ponikvar, Donald R.

    1994-07-01

    The free electron laser (FEL) has long been proposed as a flexible tool for a variety of medical applications, and yet the FEL has not seen widespread acceptance in the medical community. The issues have been the laser's size, cost, and complexity. Unfortunately, research on applications of FELs has outpaced the device development efforts. This paper describes the characteristics of the FEL, as they have been demonstrated in the U.S. Army's FEL technology development program, and identifies specific medical applications where demonstrated performance levels would suffice. This includes new photodynamic therapies for cancer and HIV treatment, orthopedic applications, tissue welding applications, and multiwavelength surgical techniques. A new tunable kilowatt class FEL device is described, which utilizes existing hardware from the U.S. Army program. An assessment of the future potential, based on realistic technology scaling is provided.

  3. VISA IB Ultra-High Bandwidth, High Gain SASE FEL

    CERN Document Server

    Andonian, Gerard; Murokh, Alex; Pellegrini, Claudio; Reiche, Sven; Rosenzweig, J B; Travish, Gil

    2004-01-01

    The results of a high energy-spread SASE FEL experiment, the intermediary experiment linking the VISA I and VISA II projects, are presented. A highly chirped beam (~1.7%) was transported without correction of longitudinal aberrations in the ATF dogleg, and injected into the VISA undulator. The output FEL radiation displayed an uncharacteristicly large bandwidth (~11%) with extremely stable lasing and measured energy of about 2 microJoules. Start-to-end simulations reproduce key features of the measured results and provide an insight into the mechanisms giving rise to such a high bandwidth. These analyses are described as they relate to important considerations for the VISA II experiment.

  4. Self-seeding scheme with gas monochromator for narrow-bandwidth soft X-ray FELs

    CERN Document Server

    Geloni, Gianluca; Saldin, Evgeni

    2011-01-01

    Self-seeding schemes, consisting of two undulators with a monochromator in between, aim at reducing the bandwidth of SASE X-ray FELs. We recently proposed to use a new method of monochromatization exploiting a single crystal in Bragg-transmission geometry for self-seeding in the hard X-ray range. Here we consider a possible extension of this method to the soft X-ray range using a cell filled with resonantly absorbing gas as monochromator. The transmittance spectrum in the gas exhibits an absorbing resonance with narrow bandwidth. Then, similarly to the hard X-ray case, the temporal waveform of the transmitted radiation pulse is characterized by a long monochromatic wake. In fact, the FEL pulse forces the gas atoms to oscillate in a way consistent with a forward-propagating, monochromatic radiation beam. The radiation power within this wake is much larger than the equivalent shot noise power in the electron bunch. Further on, the monochromatic wake of the radiation pulse is combined with the delayed electron b...

  5. Normal-conducting RF cavity of high current photoinjector for high power CW FEL.

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Schultheiss, T. (Thomas); Rathke, J. (John); Young, L. M. (Lloyd M.)

    2004-01-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high power CW FEL. The design of a 2.5-cell, {pi}-mode, 700-MHz normal-conducting RF photoinjector cavity with magnetic emittance compensation is completed. With the electric field gradients of 7.7, and 5 MV/m in the three cells, the photoinjector will produce a 2.5-MeV electron beam with 3-nC charge per bunch and the transverse rms emittance 7 mm-mrad. Electromagnetic modeling was used extensively to optimize ridge-loaded tapered waveguides and RF couplers, which led to a new, improved coupler iris design. The results, combined with a thermal and stress analysis, show that the challenging problem of cavity cooling can be successfully solved. The manufacturing of a demo 100-mA (at 35 MHz bunch repetition rate) photoinjector is underway. The design is scalable to higher power levels by increasing the electron bunch repetition rate, and provides a path to a MW-class amplifier FEL. This paper presents the cavity design and details of RF coupler modeling.

  6. Normal-Conducting High Current RF Photoinjector for High Power CW FEL

    CERN Document Server

    Kurennoy, Sergey; Nguyen, Dinh C; Rathke, John; Schrage, Dale L; Schultheiss, Tom; Wood, Richard L; Young, Lloyd M

    2005-01-01

    An RF photoinjector capable of producing high average current with low emittance and energy spread is a key enabling technology for high power CW FEL. The design of a 2.5-cell, pi-mode, 700-MHz normal-conducting RF photoinjector cavity with magnetic emittance compensation is completed. With average gradients of 7, 7, and 5 MV/m in its three accelerating cells, the photoinjector will produce a 2.5-MeV electron beam with 3-nC charge per bunch and transverse rms emittance below 7 mm-mrad. Electromagnetic modeling has been used extensively to optimize ridge-loaded tapered waveguides and RF couplers, and led to a new, improved coupler iris design. The results, combined with a thermal and stress analysis, show that the challenging problem of cavity cooling can be successfully solved. Fabrication of a demo 100-mA (at 35 MHz bunch repetition rate) photoinjector is underway. The design is scalable to higher average currents by increasing the electron bunch repetition rate, and provides a path to a MW-class FEL. This p...

  7. Investigation of short pulse effects in IR FELs and new simulation results

    CERN Document Server

    Asgekar, Vivek; Brunken, M; Casper, Lars; Genz, Harald; Grigore, Maria; Hessler, Christoph; Khodyachykh, Sergiy; Richter, Achim; Van der Meer, Alex F G

    2003-01-01

    The Darmstadt IR FEL is designed to generate wavelengths between 3 and 10 mum and driven by the superconducting electron linear accelerator. The pulsed electron beam has a peak current of 2.7 A leading to a small signal gain of 5%. Currently, investigations of the energy transfer process inside the undulator are performed using the 1D time-dependent simulation code FAST1D-OSC. We present simulation results for the power vs. different desynchronization and tapering parameters as well as a comparison with experimental data from the S-DALINAC IR-FEL. Furthermore, a compact autocorrelation system assuring a background-free measurement of the optical pulse length is described. In a first test experiment at FELIX, the autocorrelator has been tested at wavelengths 5.7 less than approximately equals lambda less than approximately equals 9.0 mum. The frequency doubling in a 2 mm-long ZnGeP//2-crystal resulted in a time resolution of 300 fs and a conversion efficiency of 5%.

  8. Optical alignment and tuning system for the HUST THz-FEL

    Science.gov (United States)

    Liu, Xu; Liu, Kaifeng; Qin, Bin; Tan, Ping; Fu, Qiang; Wang, Wei; Pei, Yuanji

    2016-11-01

    A compact FEL oscillator with a radiation wavelength of 30 - 100 μm is proposed by HUST and NSRL. The optical cavity is very sensitive to misalignment errors of the mirror, due to its near-concentric and symmetric structure. The magnetic axis of the undulator, the optical axis of the resonator, and the electron beam propagation axis must all be aligned with high precision for achieving saturated lasing. This paper introduces a high-precision, multi-degree-of-freedom controlled optical alignment system, which has the ability to align in the transverse and longitudinal directions. The alignment tolerances are given by theoretical analysis and numerical simulations with three-dimensional FEL code GENESIS and optical propagation code (OPC). To accomplish optical alignment, two auxiliary HeNe laser systems were introduced. By adjusting the HeNe laser beam spot on the wedge, the optical axis can be aligned to the magnetic axis, and the estimated errors meet the tolerances. Finally, the electron beam will be guided through the hole in the central wedge to complete the transverse alignment. The longitudinal alignment and tuning methods are also described.

  9. Application of the green function formalism to nonlinear evolution of the low gain FEL oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Shvets, G. [Princeton Plasma Physics Lab., NJ (United States); Wurtele, J.S.; Gardent, D. [Massachusetts Institute of Technology, Cambridge, MA (United States)] [and others

    1995-12-31

    A matrix formalism for the optical pulse evolution in the frequency domain, is applied to the nonlinear regime of operation. The formalism was previously developed for studies of the linear evolution of the low-gain FEL oscillator with an arbitrary shape of the electron beam. By varying experimentally controllable parameters, such as cavity detunning and cavity losses, different regimes of operation of the FEL oscillator, such as a steady state saturation and limit cycle saturation, are studied numerically. It is demonstrated that the linear supermodes, numerically obtained from the matrix formalism, provide an appropriate framework for analyzing the periodic change in the output power in the limit cycle regime. The frequency of this oscillation is related to the frequencies of the lowest-order linear supermodes. The response of the output radiation to periodic variation of the electron energy is studied. It is found that the response is enhanced when the frequency of the energy variation corresponds to the difference of per-pass phase advances of the lowest linear supermodes. Finally, various nonlinear models are tested to capture the steady state saturation and limit cycle variation of the EM field in the oscillator cavity.

  10. Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science

    CERN Document Server

    John, Corlett; Penn, Gregory; Zholents, Alexander A

    2004-01-01

    LUX is a proposed facility for ultrafast X-ray science, based on an electron beam accelerated to ~3-GeV energy in a superconducting, recirculating linac.Included in the design are multiple FEL beamlines which use the harmonic cascade approach to produce coherent XUV & soft X-ray emission beginning with a strong input external laser seed at ~200 nm wavelength. Each cascade module generally operates in the low-gain regime and is composed of a radiator together with a modulator section, separated by a magnetic chicane. The chicane temporally delays the electron beam pulse in order that a "virgin" pulse region (with undegraded energy spread) be brought into synchronism with the radiation pulse. For each cascade, the output photon energy can be selected over a wide range by varying the seed laser wavelength and the field strength in the undulators. We present numerical simulation results, as well as those from analytical models, to examine predicted FEL performance. We also discuss lattice considerations perti...

  11. Photon-induced positron annihilation lifetime spectroscopy using ultrashort laser-Compton-scattered gamma-ray pulses.

    Science.gov (United States)

    Taira, Y; Toyokawa, H; Kuroda, R; Yamamoto, N; Adachi, M; Tanaka, S; Katoh, M

    2013-05-01

    High-energy ultrashort gamma-ray pulses can be generated via laser Compton scattering with 90° collisions at the UVSOR-II electron storage ring. As an applied study of ultrashort gamma-ray pulses, a new photon-induced positron annihilation lifetime spectroscopy approach has been developed. Ultrashort gamma-ray pulses with a maximum energy of 6.6 MeV and pulse width of 2.2 ps created positrons throughout bulk lead via pair production. Annihilation gamma rays were detected by a BaF2 scintillator mounted on a photomultiplier tube. A positron lifetime spectrum was obtained by measuring the time difference between the RF frequency of the electron storage ring and the detection time of the annihilation gamma rays. We calculated the response of the BaF2 scintillator and the time jitter caused by the variation in the total path length of the ultrashort gamma-ray pulses, annihilation gamma rays, and scintillation light using a Monte Carlo simulation code. The positron lifetime for bulk lead was successfully measured.

  12. Collective Effects in the Free Electron Laser (FEL)

    Science.gov (United States)

    1984-01-01

    potential, i.e., W b/( voz z Y ) has been neglected. From the character of the dispersion relation in (26) it is clear that this regime Involves the...kiloanperes, L is the wiggler length, rb is the beam radius, B = Vw Ic, yoz = Y ( + Y22) 1/2 f(0) = (sin 6/0)2/91 e = (/ - vo/vph)Tw/2, T = L/ voz is

  13. Ultrashort hard x-ray pulses generated by 90 degrees Thomson scattering

    Energy Technology Data Exchange (ETDEWEB)

    Chin, A.H. [Univ. of California, Berkeley, CA (United States); Schoenlein, R.W.; Glover, T.E. [Ernest Orlando Lawrence Berkeley National Lab., CA (United States)] [and others

    1997-04-01

    Ultrashort x-ray pulses permit observation of fast structural dynamics in a variety of condensed matter systems. The authors have generated 300 femtosecond, 30 keV x-ray pulses by 90 degrees Thomson scattering between femtosecond laser pulses and relativistic electrons. The x-ray and laser pulses are synchronized on a femtosecond time scale, an important prerequisite for ultrafast pump-probe spectroscopy. Analysis of the x-ray beam properties also allows for electron bunch characterization on a femtosecond time scale.

  14. Generation and measurement of velocity bunched ultrashort bunch of pC charge

    Directory of Open Access Journals (Sweden)

    X. H. Lu

    2015-03-01

    Full Text Available In this paper, we discuss the velocity compression in a short rf linac of an electron bunch from a rf photoinjector operated in the blowout regime. Particle tracking simulations shows that with a beam charge of 2 pC an ultrashort bunch duration of 16 fs can be obtained at a tight longitudinal focus downstream of the linac. A simplified coherent transition radiation (CTR spectrum method is developed to enable the measurement of ultrashort (sub-50 fs bunches at low bunch energy (5 MeV and low bunch charges (<10  pC. In this method, the ratio of the radiation energy selected by two narrow bandwidth filters is used to estimate the bunch length. The contribution to the coherent form factor of the large transverse size of the bunch suppresses the radiation signal significantly and is included in the analysis. The experiment was performed at the UCLA Pegasus photoinjector laboratory. The measurement results show bunches of sub-40 fs with 2 pC of charge well consistent with the simulation using actual experimental conditions. These results open the way to the generation of ultrashort bunches with time-duration below 10 fs once some of the limitations of the setup (rf phase jitter, amplitude instability and low field in the gun limited by breakdown are corrected.

  15. Optimization Studies of the FERMI at ELETTRA FEL Design

    CERN Document Server

    De Ninno, G

    2005-01-01

    The FERMI at ELETTRA project at Sincotrone Trieste involves two FEL's, each based upon the principle of a seeded harmonic cascade and using the existing ELETTRA injection linac at 1.2 GeV beam energy. Scheduled to be completed in 2008, FEL-1 will operate in the 40-100 nm wavelength range and will involve one stage of harmonic up-conversion. The second phase, FEL-2, will begin operation two years later in the 10-40 nm wavelength range and will involve two cascade stages. FEL design assumes wavelength tunability over the full wavelength range and polarization tunability of the output radiation including helical polarization. The design considers focusing properties and segmentation of realizable undulators and available input seed lasers. We discuss how the interplay between various limitations and self-consistent accelerator simulations [1,2] have led to our current design. We present results of simulations using GENESIS and GINGER simulation codes including studies of various shot-to-shot fluctuations and und...

  16. Dispersion relations for 1D high-gain FELs

    Energy Technology Data Exchange (ETDEWEB)

    Webb, S.D.; Litvinenko, V.N.

    2010-08-23

    We present analytical results for the one-dimensional dispersion relation for high-gain FELs. Using kappa-n distributions, we obtain analytical relations between the dispersion relations for various order kappa distributions. Since an exact solution exists for the kappa-1 (Lorentzian) distribution, this provides some insight into the number of modes on the way to the Gaussian distribution.

  17. Double-Undulator Fel for Governing by the Harmonics Generation

    NARCIS (Netherlands)

    Tulupov, A. V.

    1993-01-01

    Generation of harmonics in the double-undulator FEL based on the additional cyclotron resonance is considered. It is shown that efficient control of harmonics generation is feasible. Only one selected harmonic is generated while the others are suppressed. This effect takes place under a small value

  18. Free electron lasers for the XUV spectral region

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, J.B.; Pellegrini, C.

    1984-01-01

    Using the system described, an electron storage ring with an undulator in a special bypass section, we can obtain high intensity coherent radiation by sending the beam through the undulator and using the FEL collective instability to produce radiation. Compared to other systems, such as an FEL oscillator or a transverse optical klystron, this system has the advantage that it does not

  19. Applications of free electron lasers in the UV

    Energy Technology Data Exchange (ETDEWEB)

    Couprie, M.E.

    1994-12-31

    The first applications of the UV Free Electron Lasers (FEL) show the advance to a stage of maturity for such sources. Two-color experiments coupling storage ring FEL and synchrotron radiation offer the wide range of use. (TEC). 26 refs., 7 figs., 2 tabs.

  20. Cavity ring down spectroscopy with a free-electron laser

    NARCIS (Netherlands)

    Engeln, R.; van den Berg, E.; Meijer, G.; Lin, L.; Knippels, G.M.H.; van der Meer, A. F. G.

    1997-01-01

    A cavity ring down (CRD) absorption experiment is performed with a free-electron laser (FEL) operating in the 10-11 mu m region. A short infrared pulse of approximately 20 ns, sliced from the much longer FEL pulse, is used to measure CRD spectra of ethylene in two different ways. First, ''

  1. Design and Analysis of Megawatt Class Free Electron Laser Weapons

    Science.gov (United States)

    2015-12-01

    25 H. THERMAL BLOOMING .......................................................................25 V. FREE ELECTRON LASER AND... thermal blooming. .................................................26 Figure 11. FEL 4-D model simulating an FEL oscillator configuration...nanoseconds apart . By contrast, normal conducting linear accelerators can only operate with microseconds-long macro-pulses separated by milliseconds due to

  2. Normal conducting RF cavity of high current photoinjector for high power CW FEL.

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Schultheiss, T. (Thomas); Rathke, J. (John); Christina, V.; Young, L. M. (Lloyd M.)

    2004-01-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high power CW FEL. The design of a 2.5-cell {pi}-mode 700-MHz normal-conducting RF photoinjector cavity with magnetic emittance compensation is completed. With the electric field gradients of 7, 7, and 5 MV/m in the three cells, the photoinjector will produce a 2.5-MeV electron beam with 3-nC charge per bunch and 7 mm-mrad transverse rms emittance. Electromagnetic modeling was used extensively to optimize ridge-loaded tapered waveguides and RF couplers, which led to a new improved coupler-iris design. The results, combined with a thermal/stress analysis, show that the challenging problem of cavity cooling can be successfully solved. A demo 100-mA (at 35-MHz bunch-repetition rate) photoinjector is being manufactured. The design is scalable to higher power levels by increasing the bunch repetition rate, and provides a path to a MW-class amplifier FEL. The cavity design and details of RF coupler modeling are presented.

  3. Production and detection of axion-like particles at the VUV-FEL. Letter of intent

    Energy Technology Data Exchange (ETDEWEB)

    Koetz, U.; Ringwald, A.; Tschentscher, T.

    2006-06-15

    Recently, the PVLAS collaboration has reported evidence for an anomalously large rotation of the polarization of light generated in vacuum in the presence of a transverse magnetic field. This may be explained through the production of a new light spin-zero particle coupled to two photons. In this Letter of Intent, we propose to test this hypothesis by setting up a photon regeneration experiment which exploits the photon beam of the Vacuum-UltraViolet Free-Electron Laser VUV-FEL, sent along the transverse magnetic field of a linear arrangement of dipole magnets of size B L {approx} 30 Tm. The high photon energies available at the VUV-FEL increase substantially the expected photon regeneration rate in the mass range implied by the PVLAS anomaly, in comparison to the rate expected at visible lasers of similar power. We find that the particle interpretation of the PVLAS result can be tested within a short running period. The pseudoscalar vs. scalar nature can be determined by varying the direction of the magnetic field with respect to the laser polarization. The mass of the particle can be measured by running at different photon energies. The proposed experiment offers a window of opportunity for a firm establishment or exclusion of the particle interpretation of the PVLAS anomaly before other experiments can compete. (Orig.)

  4. Growth of nano-dots on the grazing-incidence mirror surface under FEL irradiation.

    Science.gov (United States)

    Kozhevnikov, I V; Buzmakov, A V; Siewert, F; Tiedtke, K; Störmer, M; Samoylova, L; Sinn, H

    2016-01-01

    A new phenomenon on X-ray optics surfaces has been observed: the growth of nano-dots (40-55 nm diameter, 8-13 nm height, 9.4 dots µm(-2) surface density) on the grazing-incidence mirror surface under irradiation by the free-electron laser (FEL) FLASH (5-45 nm wavelength, 3° grazing-incidence angle). With a model calculation it is shown that these nano-dots may occur during the growth of a contamination layer due to polymerization of incoming hydrocarbon molecules. The crucial factors responsible for the growth of nano-dots in the model are the incident peak intensity and the reflection angle of the beam. A reduction of the peak intensity (e.g. replacement of the FEL beam by synchrotron radiation) as well as a decrease of the incident angle by just 1° (from 3° to 2°) may result in the total disappearance of the nano-dots. The model calculations are compared with surface analysis of two FLASH mirrors.

  5. Design considerations of 10 kW-scale, extreme ultraviolet SASE FEL for lithography

    CERN Document Server

    Pagani, C; Schneidmiller, E A; Yurkov, M V

    2001-01-01

    The semiconductor industry growth is driven to a large extent by steady advancements in microlithography. According to the newly updated industry road map, the 70 nm generation is anticipated to be available in the year 2008. However, the path to get there is not clear. The problem of construction of extreme ultraviolet (EUV) quantum lasers for lithography is still unsolved: progress in this field is rather moderate and we cannot expect a significant breakthrough in the near future. Nevertheless, there is clear path for optical lithography to take us to sub-100 nm dimensions. Theoretical and experimental work in Self-Amplified Spontaneous Emission (SASE) Free Electron Lasers (FEL) physics and the physics of superconducting linear accelerators over the last 10 years has pointed to the possibility of the generation of high-power optical beams with laser-like characteristics in the EUV spectral range. Recently, there have been important advances in demonstrating a high-gain SASE FEL at 100 nm wavelength (J. Andr...

  6. VUV/Soft X-Ray FEL Projects on the Horizon

    CERN Document Server

    Bakker, Rene J

    2005-01-01

    Free-Electron Lasers (FELs) combine the properties of lasers and synchrotron radiation: the possibility to produce high-power, short-pulsed, laser-like radiation in spectral regions not accessible by other light-sources. Operation of an FEL in the Vacuum Ultra Violet (VUV) to X-ray spectral region has proven challenging, however, mainly because of the increased demands set to the accelerator technology as the wavelength becomes shorter (higher peak currents and beam energy, combined with a high stability and a lower emittance and/or energy spread). Over the last decade many of these challenges have been addressed and several laboratories have demonstrated successful operation from the Infrared to the VUV. These results are very significant as they pave the way to the construction of the next-generation light-sources. Moreover, they have demonstrated the validity of the tools used to design and predict performances of such devices at these-, or ever shorter wavelengths. This presentation gives an overview of t...

  7. 3 kA Power Supplies for the Duke OK-5 FEL Wigglers

    CERN Document Server

    Popov, Victor; Mikhailov, Stepan; Oakeley, Owen; Wallace, Patrick W; Wu, Y K

    2005-01-01

    The next generation electromagnetic OK-5/Duke storage ring FEL wigglers require three 3kA/70V power supplies with current stability about 20 ppm and current ripples less than 20ppm in their full operating range. Duke FEL Laboratory acquired three out-of-service thyristor controllable power supplies (Transrex, 5kA/100V) which was built almost 30 years ago. The existing archaic firing circuit, lack of any output voltage filtering and outdated DCCT, would not be able to meet the above requirements.To deliver the desirable high performance with very limited funds, all three T-Rex power supplies have been completely rebuilt in house at DFELL. Modern high stability electronic components and a Danfysik DCCT with a high current stability have been used. New symmetrical firing circuit, efficient passive LC filter and reliable transformer-coupled active filter are used to reduce output current ripples to an appropriate level. At the present time, the first refurbished power supply in operation since August, 2004 with g...

  8. Magnetization reversal in ultrashort magnetic field pulses

    CERN Document Server

    Bauer, M; Fassbender, J; Hillebrands, B

    2000-01-01

    We report the switching properties of a thin magnetic film subject to an ultrashort, laterally localized magnetic field pulse, obtained by numerical investigations. The magnetization distribution in the film is calculated on a grid assuming Stoner-like coherent rotation within the grid square size. Perpendicularly and in-plane magnetized films exhibit a magnetization reversal due to a 4 ps magnetic field pulse. Outside the central region the pulse duration is short compared to the precession period. In this area the evolution of the magnetization during the field pulse does not depend strongly on magnetic damping and/or pulse shape. However, the final magnetization distribution is affected by the magnetic damping. Although the pulse duration is short compared to the precession period, the time needed for the relaxation of the magnetization to the equilibrium state is rather large. The influence of the different magnetic anisotropy contributions and the magnetic damping parameter enters into the magnetization ...

  9. Interaction of ultrashort electromagnetic pulses with matter

    CERN Document Server

    Astapenko, Valeriy

    2013-01-01

    The book is devoted to the theory describing the interaction of  ultra-short electromagnetic pulses (USP) with matter, including both classical and quantum cases. This theme is a hot topic in modern physics because of the great achievements in generating USP. Special attention is given to the peculiarities of UPS-matter interaction. One of the important items of this book is the derivation and applications of a new formula which describes the total photo-process probability under the action of USP in the framework of perturbation theory. Strong field-matter interaction is also considered with the use of the Bloch formalism in a two-level approximation for UPS with variable characteristics.  

  10. Ultra-short pulse laser proton acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Zeil, Karl; Kraft, Stephan; Bussmann, Michael; Cowan, Thomas; Kluge, Thomas; Metzkes, Josefine; Richter, Tom; Schramm, Ulrich [Forschungszentrum Dresden-Rossendorf, Dresden (Germany)

    2010-07-01

    We present a systematic investigation of ultra-short pulse laser acceleration of protons yielding unprecedented maximum proton energies of 17 MeV using the Ti:Sapphire lased high power laser of 100 TW Draco at the Research Centre Dresden-Rossendorf. For plain few micron thick foil targets a linear scaling of the maximum proton energy with laser power is observed and attributed to the short acceleration period close to the target rear surface. Although excellent laser pulse contrast was available slight deformations of the target rear were found to lead to a predictable shift of the direction of the energetic proton emission away from target normal towards the laser direction. The change of the emission characteristics are compared to analytical modelling and 2D PIC simulations.

  11. Molecular wakes for ultrashort laser pulses

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The molecular wake-assisted interaction between two collinear femotosecond laser pulses is investigated in air,which leads to the generation of a controllable 1.8 mJ super-continuum pulse with an elongated self-guided channel due to the cross-phase modulation of the impulsively aligned diatomic molecules in air. For two parallel launched femtosecond laser pulses with a certain spatial separation,controllable attraction and repulsion of the pulses are observed due to the counter-balance among molecular wakes,Kerr and plasma effects,where the molecular wakes show a longer interaction distance than the others to control the propagation of the intense ultrashort laser pulses.

  12. Use of VUV Imaging to Evaluate COTR and Beam-Steering Effects in a SASE FEL at 130 nm

    CERN Document Server

    Lumpkin, Alex H; Dejus, Roger J; Erdmann, Mark; Lewellen, John W; Li, Yuelin

    2004-01-01

    We have continued to explore VUV operations on the Advanced Photon Source (APS) self-amplified spontaneous emission (SASE) free-electron laser (FEL). With the installation of a fifth VUV imaging station located after undulator 7 of an eight-undulator series, we have performed our most complete SASE gain curve measurements at 130 nm as well as obtaining beam profile, position, and divergence information. This is the shortest wavelength to date for our complementary coherent optical transition radiation (COTR) measurements. We have also done the first experimental test of Tanaka et al.’s analytical model for the effects of a single-kick error of the e-beam on gain and microbunching in a SASE FEL. In addition, we compared the e-beam image centroid positions with those of the alignment laser at the available cameras and the local rf BPM readings to sort out the effective trajectory and its effect on overall gain. The FEL performance was consistent with GENESIS simulations of the experiment described in detail in...

  13. UV-VUV diagnostics for the Advanced Photon Source SASE FEL

    CERN Document Server

    Hartog, P D; Benson, C; Erdmann, M; Lumpkin, Alex H; Makarov, O; Petra, M; Tieman, B; Trakhtenberg, E; Wiemerslage, G

    2002-01-01

    The Advanced Photon Source self-amplified spontaneous emission (SASE) free-electron laser (FEL) uses diagnostics between undulator sections to characterize the light and the electron beam. These diagnostics enable z-dependent measurements of the exponential growth of the radiation and of the microbunching. The original diagnostics were designed for visible light. To enable measurements down to 265 nm, UV-enhanced cameras and fused-silica lenses have been installed. We have now designed a diagnostics suite that will enable us to continue measurements down to 50 nm using reflective optics and back-illuminated CCD cameras operating in vacuum. We describe the enhancements to the diagnostics for operation in the UV and VUV.

  14. Performance of the SASE amplifier of the TEU-FEL project

    Science.gov (United States)

    Ernst, G. J.; Goldstein, J. C.

    1992-07-01

    The free-electron laser of the TEU-FEL project of the University of Twente will be driven by a photoinjector followed by a racetrack microtron. The injector, which is now under construction, will provide a very high-brightness electron beam with an energy of about 6 MeV. In phase I of the project, experiments are being planned in which this low energy beam from the injector will pass through an undulator and will generate radiation at a wavelength of about 200 μm via the process of self-amplified spontaneous emission (SASE). Numerical simulations of the performance of this source indicate that power levels of about 15 MW (averaged over a micropulse) can be obtained with a 1-m undulator. We present additional results derived from simulation studies of the performance of this device.

  15. Simplified Method for Experimental Spectral Ratio Calculation of CHG-FEL

    CERN Document Server

    Chen Nian; Li, Ge; Li, Yuhui; Zhang, Pengfei; Zhang, Shancai

    2004-01-01

    The goal of the coherent harmonic generation free-electron laser (CHG-FEL) experiment in NSRL is to gain a 266nm coherent radiation and a large spectral ratio which is defined as the ratio of coherent intensity to incoherent intensity in infinitesimal bandwidth and solid angle aperture. The intensity measurements are made through a spectrometer whose spectral and angular aperture is much larger than the actual apertures of coherent radiation and smaller than those of incoherent radiation. So the measured ratio is integral ratio integrated over the actual apertures of the measurement system. This paper is mainly on giving a formula and designing a computer program to calculate the spectral ratio according to the bandwidth and solid angle aperture of the measurement system, taking into account the measured magnetic field of optical klystron and the energy spread of the electron beam. The code will soon be employed in our next turn experiment.

  16. Experience with Multi-Beam and Multi-Beamline FEL-Operation

    Science.gov (United States)

    Rönsch-Schulenburg, J.; Faatz, B.; Honkavaara, K.; Kuhlmann, M.; Schreiber, S.; Treusch, R.; Vogt, M.

    2017-07-01

    DESY’s free-electron laser FLASH provides soft X-ray pulses for scientific users at wavelengths down to 4nm simultaneously in two undulator beamlines. They are driven by a common linear superconducting accelerator with a beam energy of up to 1.25 GeV. The superconducting technology allows the acceleration of electron bunch trains of several hundred bunches with a spacing of 1 microsecond or more and a repetition rate of 10 Hz. A fast kickerseptum system directs one part of the bunch train to FLASH1 and the other part to FLASH2 keeping the full 10 Hz repetition rate for both. The unique setup of FLASH allows independent FEL pulse parameters for both beamlines. In April 2016, simultaneous operation of FLASH1 and FLASH2 for external users started. This paper reports on our operating experience with this type of multi-beam, multi-beamline set-up.

  17. Measurement of ultrashort pulses with a non-instantaneous nonlinearity

    Energy Technology Data Exchange (ETDEWEB)

    DeLong, K.W.; Ladera, C.L.; Trebino, R. [Sandia National Labs., Livermore, CA (United States); Kohler, B.; Wilson, K.R. [California Univ., San Diego, La Jolla, CA (United States). Dept. of Chemistry

    1995-02-01

    We show how non-instantaneous nonlinearities can be used to characterize an ultrashort pulse in an extension of the Frequency-Resolved Optical Gating technique. We demonstrate this principle using the Raman effect in fused silica.

  18. Ultrashort pulse laser technology laser sources and applications

    CERN Document Server

    Schrempel, Frank; Dausinger, Friedrich

    2016-01-01

    Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

  19. Efficiency Enhancement in a Tapered Free Electron Laser by Varying the Electron Beam Radius

    Energy Technology Data Exchange (ETDEWEB)

    Jiao, Yi; Wu, J.; Cai, Y.; Chao, A.W.; Fawley, W.M.; Frisch, J.; Huang, Z.; Nuhn, H.-D.; /SLAC; Pellegrini, C.; /SLAC /UCLA; Reiche, S.; /PSI, Villigen

    2012-02-15

    Energy extraction efficiency of a free electron laser (FEL) can be increased when the undulator is tapered after the FEL saturation. By use of ray equation approximation to combine the one-dimensional FEL theory and optical guiding approach, an explicit physical model is built to provide insight to the mechanism of the electron-radiation coherent interaction with variable undulator parameters as well as electron beam radius. The contribution of variation in electron beam radius and related transverse effects are studied based on the presented model and numerical simulation. Taking a recent studied terawatt, 120 m long tapered FEL as an example, we demonstrate that a reasonably varied, instead of a constant, electron beam radius along the undulator helps to improve the optical guiding and thus the radiation output.

  20. Ultrashort-pulse lasers based on the Sagnac interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Bezrodnyi, V.I.; Prokhorenko, V.I.; Tikhonov, E.A.; Shpak, M.T.; Iatskiv, D.IA.

    1988-01-01

    Results of experimental studies carried out on passively mode-locked and synchronously pumped ultrashort-pulse lasers with cavities based on the Sagnac interferometer are reported. It is shown that the use of the interferometer makes it possible to substantially improve the principal parameters of the ultrashort-pulse laser, such as repeatability, stability, spatial-angular characteristics, and the frequency tuning range. In particular, results are presented for YAG:Nd(3+) and dye lasers with Sagnac interferometers. 10 references.

  1. Field Encapsulation Library The FEL 2.2 User Guide

    Science.gov (United States)

    Moran, Patrick J.; Henze, Chris; Ellsworth, David

    1999-01-01

    This document describes version 2.2 of the Field Encapsulation Library (FEL), a library of mesh and field classes. FEL is a library for programmers - it is a "building block" enabling the rapid development of applications by a user. Since FEL is a library intended for code development, it is essential that enough technical detail be provided so that one can make full use of the code. Providing such detail requires some assumptions with respect to the reader's familiarity with the library implementation language, C++, particularly C++ with templates. We have done our best to make the explanations accessible to those who may not be completely C++ literate. Nevertheless, familiarity with the language will certainly help one's understanding of how and why things work the way they do. One consolation is that the level of understanding essential for using the library is significantly less than the level that one should have in order to modify or extend the library. One more remark on C++ templates: Templates have been a source of both joy and frustration for us. The frustration stems from the lack of mature or complete implementations that one has to work with. Template problems rear their ugly head particularly when porting. When porting C code, successfully compiling to a set of object files typically means that one is almost done. With templated C++ and the current state of the compilers and linkers, generating the object files is often only the beginning of the fun. On the other hand, templates are quite powerful. Used judiciously, templates enable more succinct designs and more efficient code. Templates also help with code maintenance. Designers can avoid creating objects that are the same in many respects, but not exactly the same. For example, FEL fields are templated by node type, thus the code for scalar fields and vector fields is shared. Furthermore, node type templating allows the library user to instantiate fields with data types not provided by the FEL

  2. Plasma mediated ablation of biological tissues with ultrashort laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Oraevsky, A.A. [Lawrence Livermore National Lab., CA (United States)]|[Rice Univ., Houston, TX (United States). Dept. of Electrical Engineering; DaSilva, L.B.; Feit, M.D. [Lawrence Livermore National Lab., CA (United States)] [and others

    1995-03-08

    Plasma mediated ablation of collagen gels and porcine cornea was studied at various laser pulse durations in the range from 350 fs to 1 ns at 1,053 nm wavelength. A time resolved stress detection technique was employed to measure transient stress profiles and amplitudes. Optical microscopy was used to characterize ablation craters qualitatively, while a wide band acoustic transducer helped to quantify tissue mechanical response and the ablation threshold. The ablation threshold was measured as a function of laser pulse duration and linear absorption coefficient. For nanosecond pulses the ablation threshold was found to have a strong dependence on the linear absorption coefficient of the material. As the pulse length decreased into the subpicosecond regime the ablation threshold became insensitive to the linear absorption coefficient. The ablation efficiency was found to be insensitive to both the laser pulse duration and the linear absorption coefficient. High quality ablation craters with no thermal or mechanical damage to surrounding material were obtained with 350 fs laser pulses. The mechanism of optical breakdown at the tissue surface was theoretically investigated. In the nanosecond regime, optical breakdown proceeds as an electron collisional avalanche ionization initiated by thermal seed electrons. These seed electrons are created by heating of the tissue by linear absorption. In the ultrashort pulse range, optical breakdown is initiated by the multiphoton ionization of the irradiated medium (6 photons in case of tissue irradiated at 1,053 nm wavelength), and becomes less sensitive to the linear absorption coefficient. The energy deposition profile is insensitive to both the laser pulse duration and the linear absorption coefficient.

  3. Spectrotemporal shaping of seeded free-electron laser pulses.

    Science.gov (United States)

    Gauthier, David; Ribič, Primož Rebernik; De Ninno, Giovanni; Allaria, Enrico; Cinquegrana, Paolo; Danailov, Miltcho Bojanov; Demidovich, Alexander; Ferrari, Eugenio; Giannessi, Luca; Mahieu, Benoît; Penco, Giuseppe

    2015-09-11

    We demonstrate the ability to control and shape the spectrotemporal content of extreme-ultraviolet (XUV) pulses produced by a seeded free-electron laser (FEL). The control over the spectrotemporal properties of XUV light was achieved by precisely manipulating the linear frequency chirp of the seed laser. Our results agree with existing theory, which allows us to retrieve the temporal properties (amplitude and phase) of the FEL pulse from measurements of the spectra as a function of the FEL operating parameters. Furthermore, we show the first direct evidence of the full temporal coherence of FEL light and generate Fourier limited pulses by fine-tuning the FEL temporal phase. The possibility of tailoring the spectrotemporal content of intense short-wavelength pulses represents the first step towards efficient nonlinear optics in the XUV to x-ray spectral region and will enable precise manipulation of core-electron excitations using the methods of coherent quantum control.

  4. Prospects for a soft x-ray FEL powered by a relativistic-klystron high-gradient accelerator (RK-HGA)

    Energy Technology Data Exchange (ETDEWEB)

    Shay, H.D.; Barletta, W.A.; Yu, S.S.; Schlueter, R.; Deis, G.A.

    1989-09-28

    We present here the concept of x-ray FELs using high gain, single-pass amplifiers with electron beams accelerated in high gradient structures powered by relativistic klystrons. Other authors have also considered x-ray FELs; the unique aspect of this paper is the use of high gradient acceleration. One of the authors has previously presented preliminary studies on this concept. The intent in this paper is to display the results of a top level design study on a high gain FEL, to present its sensitivity to a variety of fabrication and tuning errors, to discuss several mechanisms for increasing gain yet more, and to present explicitly the output characteristics of such an FEL. The philosophy of the design study is to find a plausible operating point which employs existing or nearly existing state-of-the-art technologies while minimizing the accelerator and wiggler lengths. The notion is to distribute the technical risk as evenly as possible over the several technologies so that each must advance only slightly in order to make this design feasible. This study entailed no systematic investigation of possible costs so that, for example, the sole criterion for balancing the trade-off between beam energy and wiggler length is that the two components have comparable lengths. 20 refs., 10 figs., 1 tab.

  5. Analytical studies of constraints on the performance for EEHG FEL seed lasers

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2011-11-15

    Laser seeding technique have been envisioned to produce nearly transform-limited pulses at soft X-ray FELs. Echo-Enabled Harmonic Generation (EEHG) is a promising, recent technique for harmonic generation with an excellent up-conversion to very high harmonics, from the standpoint of electron beam physics. This paper explores the constraints on seed laser performance for reaching wavelengths of 1 nm. We show that the main challenge in implementing the EEHG scheme at extreme harmonic factors is the requirement for accurate control of temporal and spatial quality of the seed laser pulse. For example, if the phase of the laser pulse is chirped before conversion to an UV seed pulse, the chirp in the electron beam microbunch turns out to be roughly multiplied by the harmonic factor. In the case of a Ti:Sa seed laser, such factor is about 800. For such large harmonic numbers, generation of nearly transform-limited soft X-ray pulses results in challenging constraints on the Ti:Sa laser. In fact, the relative discrepancy of the time-bandwidth product of the seed-laser pulse from the ideal transform-limited performance should be no more than one in a million. The generated electron beam microbunching is also very sensitive to distortions of the seed laser wavefront, which are also multiplied by the harmonic factor. In order to have minimal reduction of the FEL input coupling factor, it is desirable that the size-angular bandwidth product of the UV seed laser beam be very close to the ideal i.e. diffraction-limited performance in the waist plane at the middle of the modulator undulator. (orig.)

  6. Vibrational predissociation of methylnitrite using phase-locked ultrashort laser pulses

    Science.gov (United States)

    Dateo, Christopher E.; Metiu, Horia

    1993-01-01

    We solve numerically the time-dependent Schroedinger equation to study the behavior of a molecule interacting with two phase-locked ultrashort laser pulses. The 2D model used in the calculations mimics the properties of the CH3ONO molecule. The two pulses are identical except for their relative phase and are tuned to excite an upper electronic state of the molecule. After excitation the molecule predissociates, and we calculate the dependence of the NO yield and of the NO vibrational population on the delay time between the pulses.

  7. Printed organic smart devices characterized by ultra-short laser pulses

    DEFF Research Database (Denmark)

    Pastorelli, Francesco

    Resume: In this study, we demonstrate that nonlinear optical microscopy is a promising technique to characterize organic printed electronics. Using ultrashort laser pulses we stimulate two-photon absorption in a roll coated polymer semiconductor and map the resulting two-photon induced...... propose that the TPPL is a good indicator to map and monitor the charge carrier density and the molecular packing of the printed polymer material. Importantly, simple calculations based on the signal levels, suggest that this technique can be extended to the real time mapping of the polymer semiconductor...... film, even during the printing process, in which the high printing speed poses the need for equally high acquisition rates....

  8. Stimulated recombination of antiproton and positron with ultra-short ultra-high intensity laser pulse

    CERN Document Server

    Ryabinina, M V

    2003-01-01

    Ionization of hydrogen atom in the field of high-intense ultra-short femto-second laser pulse recently became the subject of comprehensive theoretical approaches. On the other hand, there exists experimental evidence that short electric pulses can effectively stimulate electron-proton (as well as antiproton-positron) recombination to high-level (Rydberg) state. In this paper we present the results of the theoretical estimations of antiproton-positron recombination cross-section in cold mixed plasmas in traps in the conditions of ATHENA/ATRAP experiments in CERN under the action of sub-fs laser pulse with TW intensity. (2 refs).

  9. Feedback Control Of Dynamical Instabilities In Classical Lasers And Fels

    CERN Document Server

    Bielawski, S; Szwaj, C

    2005-01-01

    Dynamical instabilities lead to unwanted full-scale power oscillations in many classical lasers and FEL oscillators. For a long time, applications requiring stable operation were typically performed by working outside the problematic parameter regions. A breakthrough occurred in the nineties [1], when emphasis was made on the practical importance of unstable states (stationary or periodic) that coexist with unwanted oscillatory states. Indeed, although not observable in usual experiments, unstable states can be stabilized, using a feedback control involving arbitrarily small perturbations of a parameter. This observation stimulated a set of works leading to successful suppression of dynamical instabilities (initially chaos) in lasers, sometimes with surprisingly simple feedback devices [2]. We will review a set of key results, including in particular the recent works on the stabilization of mode-locked lasers, and of the super-ACO, ELETTRA and UVSOR FELs [3].

  10. Flexible control of femtosecond pulse duration and separation using an emittance-spoiling foil in x-ray free-electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Behrens, C. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Coffee, R. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Decker, F. -J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Emma, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Field, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Helml, W. [Technische Univ. Munchen, Garching (Germany); Huang, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krejcik, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Krzywinski, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Loos, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Lutman, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Marinelli, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Maxwell, T. J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Turner, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-06-22

    We report experimental studies of generating and controlling femtosecond x-ray pulses in free-electron lasers (FELs) using an emittance spoiling foil. By selectivity spoiling the transverse emittance of the electron beam, the output pulse duration or double-pulse separation is adjusted with a variable size single or double slotted foil. Measurements were performed with an X-band transverse deflector located downstream of the FEL undulator, from which both the FEL lasing and emittance spoiling effects are observed directly.

  11. Compact X-ray Free Electron Laser from a Laser-plasma Accelerator using a Transverse Gradient Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhirong; Ding, Yuantao; /SLAC; Schroeder, Carl B.; /LBL, Berkeley

    2012-09-13

    Compact laser-plasma accelerators can produce high energy electron beams with low emittance, high peak current but a rather large energy spread. The large energy spread hinders the potential applications for coherent FEL radiation generation. In this paper, we discuss a method to compensate the effects of beam energy spread by introducing a transverse field variation into the FEL undulator. Such a transverse gradient undulator together with a properly dispersed beam can greatly reduce the effects of electron energy spread and jitter on FEL performance. We present theoretical analysis and numerical simulations for SASE and seeded extreme ultraviolet and soft x-ray FELs based on laser plasma accelerators.

  12. STUDIES OF A FREE ELECTRON LASER DRIVEN BY A LASER-PLASMA ACCELERATOR

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, A.; Schroeder, C.; Fawley, W.

    2008-01-01

    A free electron laser (FEL) uses an undulator, a set of alternating magnets producing a periodic magnetic fi eld, to stimulate emission of coherent radiation from a relativistic electron beam. The Lasers, Optical Accelerator Systems Integrated Studies (LOASIS) group at Lawrence Berkeley National Laboratory (LBNL) will use an innovative laserplasma wakefi eld accelerator to produce an electron beam to drive a proposed FEL. In order to optimize the FEL performance, the dependence on electron beam and undulator parameters must be understood. Numerical modeling of the FEL using the simulation code GINGER predicts the experimental results for given input parameters. Among the parameters studied were electron beam energy spread, emittance, and mismatch with the undulator focusing. Vacuum-chamber wakefi elds were also simulated to study their effect on FEL performance. Energy spread was found to be the most infl uential factor, with output FEL radiation power sharply decreasing for relative energy spreads greater than 0.33%. Vacuum chamber wakefi elds and beam mismatch had little effect on the simulated LOASIS FEL at the currents considered. This study concludes that continued improvement of the laser-plasma wakefi eld accelerator electron beam will allow the LOASIS FEL to operate in an optimal regime, producing high-quality XUV and x-ray pulses.

  13. STUDIES OF A FREE ELECTRON LASER DRIVEN BY A LASER-PLASMA ACCELERATOR

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, A.; Schroeder, C.; Fawley, W.

    2008-01-01

    A free electron laser (FEL) uses an undulator, a set of alternating magnets producing a periodic magnetic fi eld, to stimulate emission of coherent radiation from a relativistic electron beam. The Lasers, Optical Accelerator Systems Integrated Studies (LOASIS) group at Lawrence Berkeley National Laboratory (LBNL) will use an innovative laserplasma wakefi eld accelerator to produce an electron beam to drive a proposed FEL. In order to optimize the FEL performance, the dependence on electron beam and undulator parameters must be understood. Numerical modeling of the FEL using the simulation code GINGER predicts the experimental results for given input parameters. Among the parameters studied were electron beam energy spread, emittance, and mismatch with the undulator focusing. Vacuum-chamber wakefi elds were also simulated to study their effect on FEL performance. Energy spread was found to be the most infl uential factor, with output FEL radiation power sharply decreasing for relative energy spreads greater than 0.33%. Vacuum chamber wakefi elds and beam mismatch had little effect on the simulated LOASIS FEL at the currents considered. This study concludes that continued improvement of the laser-plasma wakefi eld accelerator electron beam will allow the LOASIS FEL to operate in an optimal regime, producing high-quality XUV and x-ray pulses.

  14. An advanced UV optical cavity for the European FEL project

    CERN Document Server

    Poole, M W; Chesworth, A A; Clarke, J A; Fell, B; Hill, C; Marl, R; Mullacrane, I D; Reid, R J

    2000-01-01

    A European collaboration is constructing a short wavelength FEL for the ELETTRA storage ring. The optical cavity has been designed and constructed at Daresbury Laboratory for delivery to Sincrotrone Trieste in Autumn 1999, following commissioning tests over the Summer. Initial FEL operation will be at 350 nm but subsequently down to 200 nm or less and mirrors will be 40 mm diameter. The 32 m optical cavity is controllable to 0.01 mu rad in mirror pitch and yaw using digital piezo translators. A novel feature is the simultaneous presence of three remotely interchangeable mirrors to extend the tuning range and also to interchange damaged mirrors immediately. In addition, a transfer arm and load-lock arrangement will permit a mirror to be withdrawn from the chamber and replaced without disruption to the UHV system. The FEL is designed to operate at high power (1-10 W) and multi-watt spontaneous emission is also present: power loading has been investigated by FEA analysis and has necessitated specification of a w...

  15. Widely tunable two-colour seeded free-electron laser source for resonant-pump resonant-probe magnetic scattering.

    Science.gov (United States)

    Ferrari, Eugenio; Spezzani, Carlo; Fortuna, Franck; Delaunay, Renaud; Vidal, Franck; Nikolov, Ivaylo; Cinquegrana, Paolo; Diviacco, Bruno; Gauthier, David; Penco, Giuseppe; Ribič, Primož Rebernik; Roussel, Eleonore; Trovò, Marco; Moussy, Jean-Baptiste; Pincelli, Tommaso; Lounis, Lounès; Manfredda, Michele; Pedersoli, Emanuele; Capotondi, Flavio; Svetina, Cristian; Mahne, Nicola; Zangrando, Marco; Raimondi, Lorenzo; Demidovich, Alexander; Giannessi, Luca; De Ninno, Giovanni; Danailov, Miltcho Boyanov; Allaria, Enrico; Sacchi, Maurizio

    2016-01-13

    The advent of free-electron laser (FEL) sources delivering two synchronized pulses of different wavelengths (or colours) has made available a whole range of novel pump-probe experiments. This communication describes a major step forward using a new configuration of the FERMI FEL-seeded source to deliver two pulses with different wavelengths, each tunable independently over a broad spectral range with adjustable time delay. The FEL scheme makes use of two seed laser beams of different wavelengths and of a split radiator section to generate two extreme ultraviolet pulses from distinct portions of the same electron bunch. The tunability range of this new two-colour source meets the requirements of double-resonant FEL pump/FEL probe time-resolved studies. We demonstrate its performance in a proof-of-principle magnetic scattering experiment in Fe-Ni compounds, by tuning the FEL wavelengths to the Fe and Ni 3p resonances.

  16. Crystallographic orientation and induced potential effects in photoelectron emission from metal surfaces by ultrashort laser pulses

    CERN Document Server

    Rubiano, C A Rios; Mitnik, D M; Silkin, V M; Gravielle, M S

    2016-01-01

    The influence of the crystallographic orientation of a typical metal surface, like aluminum, on electron emission spectra produced by grazing incidence of ultrashort laser pulses is investigated by using the band-structure-based-Volkov (BSB-V) approximation. The present version of the BSB-V approach includes not only a realistic description of the surface interaction, accounting for band structure effects, but also effects due to the induced potential that originates from the collective response of valence-band electrons to the external electromagnetic field. The model is applied to evaluate differential electron emission probabilities from the valence band of Al(100) and Al(111). For both crystallographic orientations, the contribution of partially occupied surface electronic states and the influence of the induced potential are separately analyzed as a function of the laser carrier frequency. We found that the induced potential strongly affects photoelectron emission distributions, opening a window to scrut...

  17. The effects of betatron motion on the preservation of FEL microbunching

    CERN Document Server

    Geloni, Gianluca; Saldin, Evgeni

    2011-01-01

    In some options for circular polarization control at X-ray FELs, a helical radiator is placed a few ten meters distance behind the baseline undulator. If the microbunch structure induced in the baseline (planar) undulator can be preserved, intense coherent radiation is emitted in the helical radiator. The effects of betatron motion on the preservation of micro bunching in such in-line schemes should be accounting for. In this paper we present a comprehensive study of these effects. It is shown that one can work out an analytical expression for the debunching of an electron beam moving in a FODO lattice, strictly valid in the asymptote for a FODO cell much shorter than the betatron function. Further on, numerical studies can be used to demonstrate that the validity of such analytical expression goes beyond the above-mentioned asymptote, and can be used in much more a general context. Finally, a comparison with Genesis simulations is given.

  18. Commissioning of a UV/time-resolved-FTIR beamline at the Duke FEL laboratory

    CERN Document Server

    Hutson, M S; Chang, M S; Gillikin, A; Litvinenko, V N; Edwards, G

    2002-01-01

    We describe the commissioning of a novel two-color beamline at the Duke Free Electron Laser Laboratory, designed to perform time-resolved FTIR spectroscopy in a pump-probe scheme with sub-nanosecond resolution to measure dynamical processes with durations as long as 10 ns. The UV pump pulses are produced by the tunable (193-700 nm) output of the OK-4 Storage-Ring FEL. The broadband, infrared probe pulses are generated as synchrotron radiation in a bending magnet downstream of the OK-4 wiggler. The repetition rate of the light source (2.79 MHz) is ideal for operating the interferometer in the rapid-scan, asynchronous sampling mode. An investigation of DNA photolyase is proposed.

  19. Feasibility of an XUV FEL Oscillator Driven by a SCRF Linear Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A. H.; Freund, H. P.; Reinsch, M.

    2014-01-01

    The Advanced Superconducting Test Accelerator (ASTA) facility is currently under construction at Fermi National Accelerator Laboratory. Using a1-ms-long macropulse composed of up to 3000 micropulses, and with beam energies projected from 45 to 800 MeV, the possibility for an extreme ultraviolet (XUV) free-electron laser oscillator (FELO) with the higher energy is evaluated. We have used both GINGER with an oscillator module and the MEDUSA/OPC code to assess FELO saturation prospects at 120 nm, 40 nm, and 13.4 nm. The results support saturation at all of these wavelengths which are also shorter than the demonstrated shortest wavelength record of 176 nm from a storage-ring-based FELO. This indicates linac-driven FELOs can be extended into this XUV wavelength regime previously only reached with single-pass FEL configurations.

  20. DEMONSTRATION OF 3D EFFECTS WITH HIGH GAIN AND EFFICIENCY IN A UV FEL OSCILLATOR

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Benson; George Biallas; Keith Blackburn; James Boyce; Donald Bullard; James Coleman; Cody Dickover; David Douglas; Forrest Ellingsworth; Pavel Evtushenko; Carlos Hernandez-Garcia; Christopher Gould; Joseph Gubeli; David Hardy; Kevin Jordan; John Klopf; James Kortze; Robert Legg; Matthew Marchlik; Steven Moore; George Neil; Thomas Powers; Daniel Sexton; Michelle D. Shinn; Christopher Tennant; Richard Walker; Anne Watson; Gwyn Williams; Frederick Wilson; Shukui Zhang

    2011-03-01

    We report on the performance of a high gain UV FEL oscillator operating on an energy recovery linac at Jefferson Lab. The high brightness of the electron beam leads to both gain and efficiency that cannot be reconciled with a one-dimensional model. Three-dimensional simulations do predict the performance with reasonable precision. Gain in excess of 100% per pass and an efficiency close to 1/2NW, where NW is the number of wiggler periods, is seen. The laser mirror tuning curves currently permit operation in the wavelength range of 438 to 362 nm. Another mirror set allows operation at longer wavelengths in the red with even higher gain and efficiency.

  1. Histological observation on dental hard tissue irradiated by ultrashort-pulsed laser

    Science.gov (United States)

    Uchizono, Takeyuki; Awazu, Kunio; Igarashi, Akihiro; Kato, Junji; Hirai, Yoshito

    2006-04-01

    In the field of dentistry, effectiveness of USPL irradiation is researched because USPL has less thermal side effect to dental hard tissue. In this paper, we observed morphological change and optical change of dental hard tissue irradiated by USPL for discussing the safety and effectiveness of USPL irradiation to dental hard tissues. Irradiated samples were crown enamel and root dentin of bovine teeth. Lasers were Ti:sapphire laser, which had pulse duration (P d)of 130 fsec and pulse repetition rate (f) of 1kHz and wavelength (l) of 800nm, free electron laser (FEL), which had P d of 15 μsec and f of 10Hz and wavelength of 9.6μm, and Er:YAG laser, which had P d of 250 μsec and f of 10Hz and wavelength of 2.94μm. After laser irradiation, the sample surfaces and cross sections were examined with SEM and EDX. The optical change of samples was observed using FTIR. In SEM, the samples irradiated by USPL had sharp and accurate ablation with no crack and no carbonization. But, in FEL and Er:YAG laser, the samples has rough ablation with crack and carbonization. It was cleared that the P/Ca ratio of samples irradiated by USPL had same value as non-irradiated samples. There was no change in the IR absorption spectrum between samples irradiated by USPL and non-irradiated sample. But, they of samples irradiated by FEL and Er:YAG laser, however, had difference value as non-irradiated samples. These results showed that USPL might be effective to ablate dental hard tissue without thermal damage.

  2. Thin-film deposition method assisted by mid-infrared-FEL

    CERN Document Server

    Yasumoto, M; Ishizu, A; Tsubouchi, N; Awazu, K; Umesaki, N

    2001-01-01

    We propose the novel application of the mid-infrared (MIR) FEL to the thin-film fabrication process. During the application, a substrate on which a thin film is being fabricated by a conventional method is simultaneously irradiated by the MIR FEL. The MIR FEL induces the fabricated molecules into the excited state of the stretching vibration energy, when the photon energy of the MIR FEL corresponds to one of the molecules. Therefore, the method can assist the thin-film fabrication quasi-independent of the substrate temperature. The method has the advantages of application on a temperature sensitive substrate and selective fabrication due to the tunable wavelength of the MIR FEL. In order to realize the method, we developed two thin film fabrication devices; an MIR FEL assisted RF sputtering device and an MIR FEL assisted laser ablation deposition device. For the method, the intensity of the assisted MIR FEL is an important problem. Thus the cross-section of the MIR FEL intensity profile is shown and the propa...

  3. JAERI superconducting RF linac-based free-electron laser-facility

    CERN Document Server

    Minehara, E J; Nagai, R; Kikuzawa, N; Sugimoto, M; Hajima, R; Shizuma, T; Yamauchi, T; Nishimori, N

    2000-01-01

    Recently, the JAERI superconducting RF linac based FEL has been successfully lased to produce 0.36 kW of FEL light using a 100 kW electron beam in quasi-continuous wave operation. A 1 kW class laser is our present program goal, and will be achieved by improving the optical out coupling in the FEL optical resonator, the electron gun, and the electron beam optics in the JAERI FEL driver. Our next 5-year program goal is to produce a 100 kW-class FEL laser and multi-MW class electron beam in average, quasi-continuous wave operation. Conceptual and engineering design options needed for such a very high-power operation will be discussed to improve and to upgrade the existing facility.

  4. Ceramic dentures manufactured with ultrashort laser pulses

    Science.gov (United States)

    Werelius, Kristian; Weigl, Paul

    2004-06-01

    Conventional manufacturing of individual ceramic dental prosthesis implies a handmade metallic framework, which is then veneered with ceramic layers. In order to manufacture all-ceramic dental prosthesis a CAD/CAM system is necessary due to the three dimensional shaping of high strength ceramics. Most CAD/CAM systems presently grind blocks of ceramic after the construction process in order to create the prosthesis. Using high-strength ceramics, such as Hot Isostatic Pressed (HIP)-zirconia, this is limited to copings. Anatomically shaped fixed dentures have a sculptured surface with small details, which can't be created by existing grinding tools. This procedure is also time consuming and subject to significant loss in mechanical strength and thus reduced survival rate once inserted. Ultra-short laser pulses offer a possibility in machining highly complex sculptured surfaces out of high-strength ceramic with negligible damage to the surface and bulk of the ceramic. In order to determine efficiency, quality and damage, several laser ablation parameters such as pulse duration, pulse energy and ablation strategies were studied. The maximum ablation rate was found using 400 fs at high pulse energies. High pulse energies such as 200μJ were used with low damage in mechanical strength compared to grinding. Due to the limitation of available laser systems in pulse repetition rates and power, the use of special ablation strategies provide a possibility to manufacture fully ceramic dental prosthesis efficiently.

  5. Neuromuscular disruption with ultrashort electrical pulses

    Science.gov (United States)

    Pakhomov, Andrei; Kolb, Juergen F.; Joshi, Ravindra P.; Schoenbach, Karl H.; Dayton, Thomas; Comeaux, James; Ashmore, John; Beason, Charles

    2006-05-01

    Experimental studies on single cells have shown that application of pulsed voltages, with submicrosecond pulse duration and an electric field on the order of 10 kV/cm, causes sudden alterations in the intracellular free calcium concentration, followed by immobilization of the cell. In order to examine electrical stimulation and incapacitation with such ultrashort pulses, experiments on anesthetized rats have been performed. The effect of single, 450 nanosecond monopolar pulses have been compared with that of single pulses with multi-microsecond duration (TASER pulses). Two conditions were explored: 1. the ability to elicit a muscle twitch, and, 2. the ability to suppress voluntary movement by using nanosecond pulses. The second condition is relevant for neuromuscular incapacitation. The preliminary results indicate that for stimulation microsecond pulses are advantageous over nanosecond pulses, whereas for incapacitation, the opposite seems to apply. The stimulation effects seem to scale with electrical charge, whereas the disruption effects don't follow a simple scaling law. The increase in intensity (time of incapacitation) for a given pulse duration, is increasing with electrical energy, but is more efficient for nanosecond than for microsecond pulses. This indicates different cellular mechanisms for incapacitation, most likely subcellular processes, which have been shown to become increasingly important when the pulse duration is shortened into the nanosecond range. If further studies can confirm these initial results, consequences of reduced pulse duration are a reduction in weight and volume of the pulse delivery system, and likely, because of the lower required energy for neuromuscular incapacitation, reduced safety risks.

  6. Ultra-short silicon MMI duplexer

    Science.gov (United States)

    Yi, Huaxiang; Huang, Yawen; Wang, Xingjun; Zhou, Zhiping

    2012-11-01

    The fiber-to-the-home (FTTH) systems are growing fast these days, where two different wavelengths are used for upstream and downstream traffic, typically 1310nm and 1490nm. The duplexers are the key elements to separate these wavelengths into different path in central offices (CO) and optical network unit (ONU) in passive optical network (PON). Multimode interference (MMI) has some benefits to be a duplexer including large fabrication tolerance, low-temperature dependence, and low-polarization dependence, but its size is too large to integrate in conventional case. Based on the silicon photonics platform, ultra-short silicon MMI duplexer was demonstrated to separate the 1310nm and 1490nm lights. By studying the theory of self-image phenomena in MMI, the first order images are adopted in order to keep the device short. A cascaded MMI structure was investigated to implement the wavelength splitting, where both the light of 1310nm and 1490nm was input from the same port, and the 1490nm light was coupling cross the first MMI and output at the cross-port in the device while the 1310nm light was coupling through the first and second MMI and output at the bar-port in the device. The experiment was carried on with the SOI wafer of 340nm top silicon. The cascaded MMI was investigated to fold the length of the duplexer as short as 117μm with the extinct ratio over 10dB.

  7. Time-resolved study of ICD in Ne dimers using FEL radiation

    Energy Technology Data Exchange (ETDEWEB)

    Schnorr, K., E-mail: kirsten.schnorr@mpi-hd.mpg.de [Max-Planck-Institut für Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Senftleben, A. [Universität Kassel, 34132 Kassel (Germany); Schmid, G.; Augustin, S.; Kurka, M. [Max-Planck-Institut für Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Rudenko, A. [J.R. Macdonald Laboratory, Kansas State University, Manhattan, KS 66506 (United States); Foucar, L. [Max-Planck-Institut für medizinische Forschung, 69120 Heidelberg (Germany); Broska, A.; Meyer, K. [Max-Planck-Institut für Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Anielski, D.; Boll, R. [Deutsches Elektronen-Synchrotron, 22607 Hamburg (Germany); Rolles, D. [J.R. Macdonald Laboratory, Kansas State University, Manhattan, KS 66506 (United States); Kübel, M.; Kling, M.F. [Physics Department, Ludwig-Maximilians-Universität München, 85748 Garching (Germany); Jiang, Y.H. [Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210 (China); Mondal, S.; Tachibana, T.; Ueda, K. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577 (Japan); Marchenko, T.; Simon, M. [Laboratoire de Chimie Physique-Matière et Rayonnement, UPMC and CNRS, 75231 Paris (France); and others

    2015-10-15

    Interatomic Coulombic Decay (ICD) is a relaxation phenomenon, which takes place in weakly bound atomic and molecular systems, typically within a few to hundreds of femtoseconds depending on the system and the particular decay mechanism. The creation of ICD-active states requires the production of highly excited systems, usually populated by innershell ionization or excitation. To this end, XUV and X-ray radiation from synchrotrons was conventionally applied for the majority of experiments due to the desired state-selective ionization of certain sub-shells. The advent of Free-Electron Lasers (FELs) has enabled an entirely new class of experiments, which finally allow to trace ICD directly in the time domain due to the femtosecond pulse duration. Within this paper, the first time-resolved ICD measurement using an XUV-pump–XUV-probe scheme will be discussed in detail. The experiment was performed on neon dimers and ICD was triggered by removing a 2s electron from one of the neon atoms using a 58 eV pulse from the FEL in Hamburg (FLASH). The onset of ICD was probed with a delayed copy of the trigger pulse that further ionized one of the two Ne{sup +} ions emerging after ICD. Thus, the delay-dependent yield of coincident Ne{sup +} + Ne{sup 2+} ion pairs contains the lifetime of the 2s-innershell vacancy decaying via ICD. The result of 150 fs ± 50 fs is in good agreement with theory but only for those calculations that explicitly take nuclear motion into account.

  8. Self-seeding scheme with gas monochromator for narrow-bandwidth soft X-ray FELs

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2011-03-15

    Self-seeding schemes, consisting of two undulators with a monochromator in between, aim at reducing the bandwidth of SASE X-ray FELs. We recently proposed to use a new method of monochromatization exploiting a single crystal in Bragg transmission geometry for self-seeding in the hard X-ray range. Here we consider a possible extension of this method to the soft X-ray range using a cell filled with resonantly absorbing gas as monochromator. The transmittance spectrum in the gas exhibits an absorbing resonance with narrow bandwidth. Then, similarly to the hard X-ray case, the temporal waveform of the transmitted radiation pulse is characterized by a long monochromatic wake. In fact, the FEL pulse forces the gas atoms to oscillate in a way consistent with a forward-propagating, monochromatic radiation beam. The radiation power within this wake is much larger than the equivalent shot noise power in the electron bunch. Further on, the monochromatic wake of the radiation pulse is combined with the delayed electron bunch and amplified in the second undulator. The proposed setup is extremely simple, and composed of as few as two simple elements. These are the gas cell, to be filled with noble gas, and a short magnetic chicane. The installation of the magnetic chicane does not perturb the undulator focusing system and does not interfere with the baseline mode of operation. In this paper we assess the features of gas monochromator based on the use of He and Ne.We analyze the processes in the monochromator gas cell and outside it, touching upon the performance of the differential pumping system as well. We study the feasibility of using the proposed self-seeding technique to generate narrow bandwidth soft X-ray radiation in the LCLS-II soft X-ray beam line. We present conceptual design, technical implementation and expected performances of the gas monochromator self-seeding scheme. (orig.)

  9. Novosibirsk Free Electron Laser: Recent Achievements and Future Prospects

    Science.gov (United States)

    Shevchenko, O. A.; Arbuzov, V. S.; Vinokurov, N. A.; Vobly, P. D.; Volkov, V. N.; Getmanov, Ya. V.; Davidyuk, I. V.; Deychuly, O. I.; Dementyev, E. N.; Dovzhenko, B. A.; Knyazev, B. A.; Kolobanov, E. I.; Kondakov, A. A.; Kozak, V. R.; Kozyrev, E. V.; Kubarev, V. V.; Kulipanov, G. N.; Kuper, E. A.; Kuptsov, I. V.; Kurkin, G. Ya.; Krutikhin, S. A.; Medvedev, L. E.; Motygin, S. V.; Ovchar, V. K.; Osipov, V. N.; Petrov, V. M.; Pilan, A. M.; Popik, V. M.; Repkov, V. V.; Salikova, T. V.; Sedlyarov, I. K.; Serednyakov, S. S.; Skrinsky, A. N.; Tararyshkin, S. V.; Tribendis, A. G.; Cheskidov, V. G.; Chernov, K. N.; Shcheglov, M. A.

    2017-02-01

    Free electron lasers (FELs) are unique sources of electromagnetic radiation with tunable wavelength. A high-power FEL has been created at the G. I.Budker Institute for Nuclear Physics. Its radiation frequency can be tuned over a wide range in the terahertz and infrared spectral ranges. As the source of electron bunches, this FEL uses a multi-turn energy-recovery linac, which has five straight sections. Three sections are used for three FELs which operate in different wavelength ranges (90-240 μm for the first, 37-80 μm for the second, and 5-20 μm for the third ones). The first and the second FELs were commissioned in 2003 and 2009, respectively. They are used for various applied and research problems now. The third FEL is installed on the last, forth accelerator loop, in which the electron energy is the maximum. It comprises three undulator sections and a 40 m optical cavity. The first lasing of this FEL was obtained in the summer of 2015. The radiation wavelength was 9 μm and the average power was about 100 W. The design power is 1 kW at a pulse repetition rate of 3.75 MHz. Radiation of the third FEL will be delivered to user stations from the protected hall in the near future. The third FEL commissioning results are presented and the current status of the first and second FELs as well as their future development prospects are described.

  10. Laser Phase Errors in Seeded FELs

    Energy Technology Data Exchange (ETDEWEB)

    Ratner, D.; Fry, A.; Stupakov, G.; White, W.; /SLAC

    2012-03-28

    Harmonic seeding of free electron lasers has attracted significant attention from the promise of transform-limited pulses in the soft X-ray region. Harmonic multiplication schemes extend seeding to shorter wavelengths, but also amplify the spectral phase errors of the initial seed laser, and may degrade the pulse quality. In this paper we consider the effect of seed laser phase errors in high gain harmonic generation and echo-enabled harmonic generation. We use simulations to confirm analytical results for the case of linearly chirped seed lasers, and extend the results for arbitrary seed laser envelope and phase.

  11. Wavefront sensor based diagnostic of FERMI FEL photon beam (Conference Presentation)

    Science.gov (United States)

    Raimondi, Lorenzo; Mahne, Nicola; Manfredda, Michele; Svetina, Cristian; Cocco, Daniele; Capotondi, Flavio; Pedersoli, Emanuele; Kiskinova, Maya; Zangrando, Marco

    2016-09-01

    FERMI is the first seeded EUV-SXR free electron laser (FEL) user facility, and it is operated at Elettra Sincrotrone Trieste. Two of the four already operating beamlines, namely LDM (Low Density Matter) and DiProI (Diffraction and Projection Imaging), use a Kirkpatrick-Baez (K-B) active X-ray optics system for focusing the FEL pulses onto the target under investigation. A wafefront sensor is used as diagnostic for the characterization of the focused spot and for the optimization of the parameters of these active optical systems as well. The aim of this work is, first, to describe in detail the optimization procedure using the wavefront sensor through the minimization of the Zernike coefficients, and second, report on the final results obtained on the K-B optical system at the DiProI endstation. The wavefront sensor, mounted out of focus behind the DiProI chamber, allows to compute the intensity distribution of the FEL beam, typically a mix between several modes resulting in a "noisy hyper-Gaussian" intensity profile, and the wavefront residual from ideal propagation shape and after tilt correction. Combining these two measures we can obtain the electric field of the wave out of focus. Propagating back the electric field we reconstruct the focal spot in far field approximation. In this way the sensor works as a diagnostic reconstructing the focal spot. On the other hand, after modelling the electric field with a Zernike polynomial it is easy and fast to optimize the mirror bending and the optical system angles by minimizing the aberrations, quantified in terms of Zernike coefficients. Since each coefficient corresponds to a single parameter, they can be minimized one at the time. Online wavefront measurements have made possible the optimization of the bending acting on the mirror curvature, and of the (pitch and roll) angle positions of the K-B system. From the wavefront measurements we have inferred a focal spot for DiProI of 5.5 μm x 6.2 μm at 32 nm wavelength

  12. Status of the microwave inverse FEL experiment

    Science.gov (United States)

    Yoder, R. B.; Marshall, T. C.; Wang, Mei; Hirshfield, J. L.

    1999-07-01

    A status report is presented on an inverse free-electron-laser accelerator experiment operating in the microwave regime (1). This proof-of-principle electron accelerator is powered by up to 15 MW of RF power at 2.86 GHz, which propagates in a smooth-walled circular waveguide surrounded by a pulsed bifilar helical undulator: solenoids provide an axial guiding magnetic field. Undulator pitch, which is initially 11.75 cm, is up-tapered to 13.5 cm over the 1-meter length of the structure to maintain acceleration gradient. Numerical computations predict an energy gain of 0.7 MeV using a 6 MeV injected beam from a 2-1/2 cell RF gun, with small energy spread and strong phase trapping. The maximum attainable acceleration gradient with such a design, using 150 MW of RF power at 34 GHz, is estimated to be at least 30 MV/m. Results from bench tests of the structure and undulator are presented, along with preliminary beam measurements.

  13. Generation And Measurement Of High Contrast Ultrashort Intense Laser Pulses

    CERN Document Server

    Konoplev, O A

    2000-01-01

    In this thesis, the generation and measurement of high contrast, intense, ultrashort pulses have been studied. Various factors affecting the contrast and pulse shape of ultrashort light pulses from a chirped pulse amplification (CPA) laser system are identified. The level of contrast resulting from influence of these factors is estimated. Methods for improving and controlling the pulse shape and increasing the contrast are discussed. Ultrahigh contrast, 1-ps pulses were generated from a CPA system with no temporal structure up to eleven orders of magnitude. This is eight orders of magnitude higher contrast than the original pulse. This contrast boost was achieved using two techniques. One is the optical pulse cleaning based on the nonlinear birefringence of the chirping fiber and applied to the pulses before amplification. The other is the fast saturable absorber. The fast saturable absorber was placed after amplification and compression of the pulse. The measurements of high-contrast, ultrashort pulse with h...

  14. Quasi-classical model of dynamic molecular structure and non-destructive wavepacket manipulation by ultrashort laser pulses

    CERN Document Server

    Bryan, W A; King, R B; Nemeth, G R A J; Greenwood, J B; Williams, I D; Newell, W R

    2010-01-01

    A quasi-classical model (QCM) of molecular dynamics in intense femtosecond laser fields has been developed, and applied to a study of the effect of an ultrashort `control' pulse on the vibrational motion of a deuterium molecular ion in its ground electronic state. A nonadiabatic treatment accounts for the initial ionization-induced vibrational population caused by an ultrashort `pump' pulse. In the QCM, the nuclei move classically on the molecular potential as it is distorted by the laser-induced Stark shift and transition dipole. The nuclei then adjust to the modified potential, non-destructively shifting the vibrational population and relative phase. This shift has been studied as a function of control pulse parameters. Excellent agreement is observed with predictions of time-dependent quantum simulations, lending confidence to the validity of the model and permitting new observations to be made. The applicability of the QCM to more complex multi-potential energy surface molecules (where a quantum treatment...

  15. Development of Ultrashort Pulse Lasers and Their Applications to Ultrafast Spectroscopy in the Visible and NIR Ranges

    Science.gov (United States)

    Kobayashi, Takayoshi

    2016-07-01

    The use of ultrafast spectroscopy to gain detailed information about nonlinear processes can disclose the key physical mechanisms in the processes. The information promises to be a useful means to enhance the necessary nonlinearity for optical devices such as optical switches and optical manipulations of quantum states. Our group has generated stable visible to near-infrared laser pulses with a sub-5-fs duration using a non-collinear optical parametric amplifier. We also developed a detection system composed of 128 lock-in detectors, which provides an indispensable means of obtaining ultrafast nonlinear responses simultaneously in a very broad spectral range. The developed ultrashort pulse laser is used to study the electronic relaxation and molecular vibration dynamics in molecular systems through the interaction of the ultrashort pulses with the systems. Ultrashort pulses can stimulate Raman scattering in a molecular system. Observed time-resolved spectrum was analyzed to separate the electronic and vibrational contributions to the transient difference absorbance. The probe wavelength dependence of the vibrational amplitude is explained in terms of the coupling between the two pairing components among the pump field, Stokes field, anti-Stokes field, and coherent vibrational coordinates.

  16. Production of transform-limited X-ray pulses through self-seeding at the European X-ray FEL

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2011-09-15

    An important goal for any advanced X-ray FEL is an option for providing Fourier-limited X-ray pulses. In this way, no monochromator is needed in the experimental hall. Self-seeding is a promising approach to significantly narrow the SASE bandwidth to produce nearly transform-limited pulses. These are important for many experiments including 3D diffraction imaging.We discuss the implementation of a single-crystal self-seeding scheme in the hard X-ray lines of the European XFEL. For this facility, transform-limited pulses are particularly valuable since they naturally support the extraction of more FEL power than at saturation by exploiting tapering in the tunable-gap baseline undulators. Tapering consists of a stepwise change of the undulator gap from segment to segment. Based on start-to-end simulations dealing with the up-to-date parameters of the European XFEL, we show that the FEL power reaches about 400 GW, or one order of magnitude higher power than the SASE saturation level (20 GW). This analysis indicates that our self-seeding scheme is not significantly affected by non-ideal electron phase-space distribution, and yields about the same performance as in the case for an electron beam with ideal parameters. The self-seeding scheme with a single crystal monochromator is extremely compact (about 5 m long), and cost estimations are low enough to consider adding it to the European XFEL capabilities from the very beginning of the operation phase. (orig.)

  17. Simulation studies of a XUV/soft X-ray harmonic-cascade FEL for the proposed LBNL recirculating linac*

    Energy Technology Data Exchange (ETDEWEB)

    Fawley, W.M.; Barletta, W.A.; Corlett, J.N.; Zholents, A.

    2003-06-02

    Presently there is significant interest at LBNL in designing and building a facility for ultrafast (i.e. femtosecond time scale) x-ray science based upon a superconducting, recirculating RF linac (see Corlett et al. for more details). In addition to producing synchrotron radiation pulses in the 1-15 keV energy range, we are also considering adding one or more free-electron laser (FEL) beamlines using a harmonic cascade approach to produce coherent XUV soft X-ray emission beginning with a strong input seed at {approx}200 nm wavelength obtained from a ''conventional'' laser. Each cascade is composed of a radiator together with a modulator section, separated by a magnetic chicane. The chicane temporally delays the electron beam pulse in order that a ''virgin'' pulse region (with undegraded energy spread) be brought into synchronism with the radiation pulse, which together then undergo FEL action in the modulator. We present various results obtained with the GINGER simulation code examining final output sensitivity to initial electron beam parameters. We also discuss the effects of spontaneous emission and shot noise upon this particular cascade approach which can limit the final output coherence.

  18. Velocity and Magnetic Compressions in FEL Drivers

    CERN Document Server

    Serafini, L

    2005-01-01

    We will compare merits and issues of these two techniques suitable for increasing the peak current of high brightness electron beams. The typical range of applicability is low energy for the velocity bunching and middle to high energy for magnetic compression. Velocity bunching is free from CSR effects but requires very high RF stability (time jitters), as well as a dedicated additional focusing and great cure in the beam transport: it is very well understood theoretically and numerical simulations are pretty straightforward. Several experiments of velocity bunching have been performed in the past few years: none of them, nevertheless, used a photoinjector designed and optimized for that purpose. Magnetic compression is a much more consolidated technique: CSR effects and micro-bunch instabilities are its main drawbacks. There is a large operational experience with chicanes used as magnetic compressors and their theoretical understanding is quite deep, though numerical simulations of real devices are still cha...

  19. Fireworks in noble gas clusters a first experiment with the new "free-electron laser"

    CERN Multimedia

    2002-01-01

    An international group of scientists has published first experiments carried out using the new soft X-ray free-electron laser (FEL) at the research center DESY in Hamburg, Germany. Using small clusters of noble gas atoms, for the first time, researchers studied the interaction of matter with intense X-ray radiation from an FEL on extremely short time scales (1 page).

  20. Broad-Band Tunability of a Far-Infrared Free-Electron Laser

    NARCIS (Netherlands)

    Bakker, R. J.; van der Geer, C. A. J.; Jaroszynski, D. A.; van der Meer, A. F. G.; Oepts, D.; van Amersfoort, P. W.

    1993-01-01

    A unique property of the free-electron laser (FEL) is its capability to be tuned continuously over a wide spectral range. This is a major difference with all other high-power lasers. However, the tunability of first-generation FELs used to be quite poor (typically 10% or less), due to constraints im

  1. Theoretical study of a waveguide THz free electron laser and comparisons with simulations

    Science.gov (United States)

    Shobuda, Yoshihiro; Chin, Yong Ho

    2016-09-01

    In a so-called waveguide free electron laser (FEL) for THz radiations, an extremely small aperture (˜mm ) waveguide is used to confine angularly wide spread radiation fields from a low energy electron beam into a small area. This confinement increases the interaction between the electron beam and the radiation fields to achieve a much higher FEL gain. The radiation fields propagate inside the waveguide as waveguide modes, not like a light flux in a free space FEL. This characteristic behavior of the radiation fields makes intuitive understanding of the waveguide FEL difficult. We developed a three-dimensional waveguide FEL theory to calculate a gain of THz waveguide FEL including the effects of the energy spread, the beam size and the betatron oscillations of an electron beam, and effects of a rectangular waveguide. The FEL gain can be calculated as a function of frequency by solving the dispersion relation. Theoretical gains are compared with simulation results for a waveguide FEL with a planar undulator similar to the KAERI one. Good agreements are obtained.

  2. Theoretical study of a waveguide THz free electron laser and comparisons with simulations

    Directory of Open Access Journals (Sweden)

    Yoshihiro Shobuda

    2016-09-01

    Full Text Available In a so-called waveguide free electron laser (FEL for THz radiations, an extremely small aperture (∼mm waveguide is used to confine angularly wide spread radiation fields from a low energy electron beam into a small area. This confinement increases the interaction between the electron beam and the radiation fields to achieve a much higher FEL gain. The radiation fields propagate inside the waveguide as waveguide modes, not like a light flux in a free space FEL. This characteristic behavior of the radiation fields makes intuitive understanding of the waveguide FEL difficult. We developed a three-dimensional waveguide FEL theory to calculate a gain of THz waveguide FEL including the effects of the energy spread, the beam size and the betatron oscillations of an electron beam, and effects of a rectangular waveguide. The FEL gain can be calculated as a function of frequency by solving the dispersion relation. Theoretical gains are compared with simulation results for a waveguide FEL with a planar undulator similar to the KAERI one. Good agreements are obtained.

  3. Broad-Band Tunability of a Far-Infrared Free-Electron Laser

    NARCIS (Netherlands)

    Bakker, R. J.; van der Geer, C. A. J.; Jaroszynski, D. A.; van der Meer, A. F. G.; Oepts, D.; van Amersfoort, P. W.

    1993-01-01

    A unique property of the free-electron laser (FEL) is its capability to be tuned continuously over a wide spectral range. This is a major difference with all other high-power lasers. However, the tunability of first-generation FELs used to be quite poor (typically 10% or less), due to constraints

  4. On the ultrashort lifetime of electronically excited thiophenol

    Science.gov (United States)

    Ovejas, Virginia; Fernández-Fernández, Marta; Montero, Raúl; Longarte, Asier

    2016-09-01

    The relaxation dynamics of thiophenol, excited from the onset of the S1 (11ππ∗) state absorption, to the more intense S3 (21ππ∗) state band (290-244 nm), has been studied by time resolved ion yield spectroscopy. Along the studied energy range, the reached excited states relax in less 100 fs. These results evidence that the photophysics is dominated by the non-adiabatic coupling between the initially excited S1 and S31ππ∗ states, and the dissociative character 1πσ∗ state. Contrarily to phenol, the 11ππ∗/1πσ∗ crossing is reached from the origin of the 11ππ∗ state absorption, through a nearly barrierless pathway.

  5. Effect of Orbital Angular Momentum on Nondiffracting Ultrashort Optical Pulses.

    Science.gov (United States)

    Ornigotti, Marco; Conti, Claudio; Szameit, Alexander

    2015-09-01

    We introduce a new class of nondiffracting optical pulses possessing orbital angular momentum. By generalizing the X-wave solution of the Maxwell equation, we discover the coupling between angular momentum and the temporal degrees of freedom of ultrashort pulses. The spatial twist of propagation invariant light pulse turns out to be directly related to the number of optical cycles. Our results may trigger the development of novel multilevel classical and quantum transmission channels free of dispersion and diffraction. They may also find application in the manipulation of nanostructured objects by ultrashort pulses and for novel approaches to the spatiotemporal measurements in ultrafast photonics.

  6. Light curve solutions of the ultrashort-period $Kepler$ binaries

    CERN Document Server

    Kjurkchieva, Diana

    2015-01-01

    We carried out light curve solutions of the ultrashort-period binaries with MS components observed by $Kepler$. All six targets turned out almost in thermal contact with contact or slightly overcontact configurations. Two of them, KID 4921906 and KID 6309193, are not eclipsing but reveal ellipsoidal and spot variability. One of the components of KID 8108785 exhibits inherent, quasi-sinusoidal, small-amplitude variability. KID 12055255 turned out a very rare case of ultrashort-period overcontact binary consisting of two M dwarfs. Our modeling indicated that the variability of KID 9532219 is due to eclipses but not to $\\delta$ Sct pulsations as it was previously supposed.

  7. Limitations of electron beam conditioning for free-electron lasers

    Directory of Open Access Journals (Sweden)

    P. Emma

    2003-03-01

    Full Text Available Several ideas have been proposed to “condition” an electron beam prior to the undulator of a free-electron laser (FEL by increasing each particle’s energy in proportion to the square of its transverse betatron amplitude. This conditioning enhances FEL gain by reducing the axial velocity spread within the electron bunch. We demonstrate that for symplectic beam lines, and independent of the method, this conditioning is always accompanied by a large head-tail focusing variation which, for short-wavelength FELs, is so severe as to make conditioning completely impractical. We furthermore find that any system added to correct the head-tail focusing variation will also remove the conditioning. As an example, a new method for conditioning is presented and shown to generate exactly the same head-tail focusing problems as in previously published work.

  8. Real time diagnostic for operation at a CW low voltage FEL

    Energy Technology Data Exchange (ETDEWEB)

    Balfour, C.; Shaw, A.; Mayhew, S.E. [and others

    1995-12-31

    At Liverpool University, a system for single user control of an FEL has been designed to satisfy the low voltage FEL (ie 200kV) operational requirements. This system incorporates many aspects of computer automation for beam diagnostics, radiation detection and vacuum system management. In this paper the results of the development of safety critical control systems critical control systems are reported.

  9. Wavelength dependent delay in the onset of FEL tissue ablation

    Energy Technology Data Exchange (ETDEWEB)

    Tribble, J.A.; Edwards, G.S. [Vanderbilt Univ., Nashville, TN (United States); Lamb, J.A. [Massachusetts General Hospital, Boston, MA (United States)] [and others

    1995-12-31

    We are investigating the wavelength dependence of the onset of laser tissue ablation in the IR Visible and UV ranges. Toward this end, we have made simultaneous measurements of the ejected material (using a HeNe probe beam tangential to the front surface) and the residual stress transient in the tissue (using traditional piezoelectric detection behind the thin samples). For the IR studies we have used the Vanderbilt FEL and for the UV and Vis range we have used a Q-switched ND:Yag with frequency doubling and quadrupling. To satisfy the conditions of the near field limit for the detection of the stress transient, the duration of the IR FEL macropulse must be as short as possible. We have obtained macropulses as short as 100 ns using Pockels Cell technology. The recording of the signals from both the photodiode monitoring the HeNe probe beam and the acoustic detector are synchronized with the arrival of the 100 ns macropulse. With subablative intensities, the resulting stress transient is bipolar with its positive peak separated from its negative peak by 100 ns in agreement with theory. Of particular interest is the comparison of ablative results using 3 {mu}m and 6.45 {mu}m pulses. Both the stress transient and the ejection of material suffer a greater delay (with respect to the arrival of the 100 ns pulse) when the FEL is tuned to 3 {mu}m as compared to 6.45 {mu}m. A comparison of IR Vis and UV data will be discussed in terms of microscopic mechanisms governing the laser ablation process.

  10. Constraints on photon pulse duration from longitudinal electron beam diagnostics at a soft x-ray free-electron laser

    Directory of Open Access Journals (Sweden)

    C. Behrens

    2012-03-01

    Full Text Available The successful operation of x-ray free-electron lasers (FELs, like the Linac Coherent Light Source or the Free-Electron Laser in Hamburg (FLASH, makes unprecedented research on matter at atomic length and ultrafast time scales possible. However, in order to take advantage of these unique light sources and to meet the strict requirements of many experiments in photon science, FEL photon pulse durations need to be known and tunable. This can be achieved by controlling the FEL driving electron beams, and high-resolution longitudinal electron beam diagnostics can be utilized to provide constraints on the expected FEL photon pulse durations. In this paper, we present comparative measurements of soft x-ray pulse durations and electron bunch lengths at FLASH. The soft x-ray pulse durations were measured by FEL radiation pulse energy statistics and compared to electron bunch lengths determined by frequency-domain spectroscopy of coherent transition radiation in the terahertz range and time-domain longitudinal phase space measurements. The experimental results, theoretical considerations, and simulations show that high-resolution longitudinal electron beam diagnostics provide reasonable constraints on the expected FEL photon pulse durations. In addition, we demonstrated the generation of soft x-ray pulses with durations below 50 fs (FWHM after the implementation of the new uniform electron bunch compression scheme used at FLASH.

  11. Scale Law of the High Power Free Electron Laser

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The scale law and design procedure of the high power FEL are discussed. It is pointed out that theextraction efficiency, which is the critical factor of the output power besides the power of the electron

  12. A setup for resonant inelastic soft x-ray scattering on liquids at free electron laser light sources

    Energy Technology Data Exchange (ETDEWEB)

    Kunnus, Kristjan; Schreck, Simon; Foehlisch, Alexander [Institute for Methods and Instrumentation for Synchrotron Radiation Research, Helmholtz-Zentrum Berlin GmbH, Albert-Einstein-Strasse 15, 12489 Berlin (Germany); Institut fuer Physik und Astronomie, Universitaet Potsdam, Karl-Liebknecht-Strasse 24/25, 14476 Potsdam (Germany); Rajkovic, Ivan; Quevedo, Wilson; Gruebel, Sebastian; Scholz, Mirko [IFG Structural Dynamics of (Bio)chemical Systems, Max Planck Institute for Biophysical Chemistry, Am Fassberg 11, 37070 Goettingen (Germany); Eckert, Sebastian; Beye, Martin; Suljoti, Edlira; Weniger, Christian; Wernet, Philippe [Institute for Methods and Instrumentation for Synchrotron Radiation Research, Helmholtz-Zentrum Berlin GmbH, Albert-Einstein-Strasse 15, 12489 Berlin (Germany); Kalus, Christian [Abteilung Betrieb Beschleuniger BESSYII, Helmholtz-Zentrum Berlin GmbH, Albert-Einstein-Strasse 15, 12489 Berlin (Germany); Nordlund, Dennis [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Zhang, Wenkai; Hartsock, Robert W.; Gaffney, Kelly J. [PULSE Institute, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Schlotter, William F.; Turner, Joshua J. [Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Kennedy, Brian [MAX-lab, PO Box 118, 221 00 Lund (Sweden); and others

    2012-12-15

    We present a flexible and compact experimental setup that combines an in vacuum liquid jet with an x-ray emission spectrometer to enable static and femtosecond time-resolved resonant inelastic soft x-ray scattering (RIXS) measurements from liquids at free electron laser (FEL) light sources. We demonstrate the feasibility of this type of experiments with the measurements performed at the Linac Coherent Light Source FEL facility. At the FEL we observed changes in the RIXS spectra at high peak fluences which currently sets a limit to maximum attainable count rate at FELs. The setup presented here opens up new possibilities to study the structure and dynamics in liquids.

  13. Design Study of a Compact Megawatt Class FEL Amplifier Based on the VISA Undulator

    CERN Document Server

    Watanabe, T; Murphy, J B; Pinayev, I P; Rose, J; Shaftan, T V; Skaritka, J; Tanabé, T; Tsang, Thomas; Wang, X J; Yu, L H

    2005-01-01

    The design of a Short Rayleigh Length (SRL) FEL amplifier based on the strong focusing VISA undulator [1] is presented in this study. The SRL FEL amplifier will be operating in the IR (0.8 - 1 μm), and consists of a two-meter VISA undulator with a peak seed laser power of about 1 kW. The FEL power and transverse mode evolution along the undulator were investigated using the three-dimensional numerical code GENESIS1.3. The evolution of the FEL output from the undulator exit to the first downstream optics is also studied. The possibility of using the proposed amplifier for a two-stage cascaded HGHG FEL [2] at the BNL SDL is also explored. The design parameters and the numerical results will be presented.

  14. Parameter analysis for a high-gain harmonic generation FEL using a recently developed 3D polychromatic code

    CERN Document Server

    Biedron, S G; Yu, L H

    2000-01-01

    One possible design for a fourth-generation light source is the high-gain harmonic generation (HGHG) free-electron laser (FEL). Here, a coherent seed with a wavelength at a subharmonic of the desired output radiation interacts with the electron beam in an energy-modulating section. This energy modulation is then converted into spatial bunching while traversing a dispersive section (a three-dipole chicane). The final step is passage through an undulator tuned to the desired higher harmonic output wavelength. The coherent seed serves to suppress and can be at a much lower subharmonic of the output radiation. Recently, a 3D code that includes multiple frequencies, multiple undulators (both in quantity and/or type), quadrupole magnets, and dipole magnets was developed to easily simulate HGHG. Here, a brief review of the HGHG theory, the code development, the Accelerator Test Facility's (ATF) HGHG FEL experimental parameters, and the parameter analysis from simulations of this specific experiment will be discussed...

  15. Planar undulator motion excited by a fixed traveling wave: Quasiperiodic Averaging, normal forms and the FEL Pendulum

    CERN Document Server

    Ellison, James A; Vogt, Mathias; Gooden, Matthew

    2013-01-01

    We present a mathematical analysis of planar motion of energetic electrons moving through a planar dipole undulator, excited by a fixed planar polarized plane wave Maxwell field in the X-Ray Free Electron Laser (FEL) regime. Our starting point is the 6D Lorentz system, which allows planar motions, and we examine this dynamical system as the wavelength of the traveling wave varies. By scalings and transformations the 6D system is reduced, without approximation, to a 2D system in a form for a rigorous asymptotic analysis using the Method of Averaging (MoA), a long time perturbation theory. The two dependent variables are a scaled energy deviation and a generalization of the so-called ponderomotive phase. As the wavelength varies the system passes through resonant and nonresonant (NR) zones and we develop NR and near-to-resonant (NtoR) normal form approximations. For a special initial condition and on resonance, the NtoR normal form reduces to the well-known FEL pendulum system. We then state and prove NR and Nt...

  16. Ultrashort mode-locked lasers with additional Raman active elements

    Science.gov (United States)

    Trunov, V. I.; Kirpichnikov, A. V.; Pestryakov, Efim V.; Petrov, V. V.; Komarov, A. K.; Komarov, Konstantin P.

    2002-05-01

    Numerical simulation of ultrashort pulse generation in the laser with a composite active medium and additional Raman active element in a cavity has been done. It was created that for some laser parameters the optimization of a Raman gain and a frequency shift values was resulted in additional shortening of pulse duration.

  17. Theory and simulation of ultra-short pulse laser interactions

    Energy Technology Data Exchange (ETDEWEB)

    More, R.; Walling, R.; Price, D.; Guethlein, G.; Stewart, R.; Libby, S.; Graziani, F.; Levatin, J. [Lawrence Livermore National Lab., Livermore, CA (United States)

    1998-03-01

    This paper describes recent Livermore work aimed at building computational tools to describe ultra-short pulse laser plasmas. We discuss calculations of laser absorption, atomic data for high-charge ions, and a new idea for linear-response treatment of non-equilibrium phenomena near LTE. (author)

  18. Melting of copper surface by ultrashort laser pulses

    NARCIS (Netherlands)

    Oboňa, J.V.; Ocelík, V.; Hosson, J.T.M. de; Skolski, J.Z.P.; Mitko, V.S.; Römer, G.R.B.E.; Huis in 't Veld, A.J.

    2011-01-01

    The main advantage of ultrashort laser pulses in manufacturing technology is their very high removal rate of material and high quality of microstructures with the smallest dimensions at 1 μm level. The accuracy is mainly due to an almost absence of thermal diffusion into bulk material. In this paper

  19. Surface melting of copper by ultrashort laser pulses

    NARCIS (Netherlands)

    Oboňa, J.V.; Ocelík, V.; De Hosson, J.T.M.; Skolski, J.Z.P.; Mitko, V.S.; Römer, G.R.B.E.; Huis in 't Veld, A.J.

    2011-01-01

    The main advantage of ultrashort laser pulses in manufacturing technology is their very high removal rate of material and high quality of microstructures with the smallest dimensions at 1 μm level. The accuracy is mainly due to an almost absence of thermal diffusion into bulk material. In this paper

  20. Perturbative effects on ultra-short soliton self-switching

    Indian Academy of Sciences (India)

    Amarendra K Sarma; Ajit Kumar

    2007-10-01

    A numerical study of ultra-short self-soliton switching along with the corresponding analysis of coupler parameters is carried out for a Kerr coupler with intermodal dispersion. The influence of perturbations like third-order dispersion, self-steepening and intrapulse Raman scattering, on switching characteristics is also studied.