WorldWideScience

Sample records for fel research development

  1. Low Emittance X-FEL Development

    CERN Document Server

    Li, K S B; Anghel, A; Bakker, R J; Böge, M; Candel, A E; Dehler, M; Ganter, R; Gough, C; Ingold, G; Leemann, S C; Pedrozzi, M; Raguin, J Y; Rivkin, L; Schlott, V; Streun, A; Wrulich, A F

    2005-01-01

    The Paul Scherrer Institute (PSI) in Switzerland currently develops a Low-Emittance electron-Gun (LEG) based on field-emitter technology [1]. The target is a normalized transverse emittance of 5 10(-8) m rad or less. Such a source is particularly interesting for FELs that target wavelengths below 0.3 nm since it permits a reduction of the required beam-energy and hence, a reduction of the construction- and operational costs of X-ray FELs. That is, for the case that this initial low emittance can be maintained throughout the accelerator. Here we present a concept for a 0.1 nm X-FEL based on LEG, which can be located close to the Swiss Light Source (SLS). Special attention goes to the maintenance of the emittance during the process of acceleration and bunch-compression, in particular in the regimes where either space-charge forces or coherent-synchrotron radiation are of importance.

  2. An induction linac developed for FEL application

    Science.gov (United States)

    de Mascureau, J.; Anthouard, Ph.; Bardy, J.; Eyharts, Ph.; Eyl, P.; Launspach, J.; Thevenot, M.; Villate, D.

    1992-07-01

    An induction linac is being studied and built at CESTA for FEL application. At first we studied the induction technology and namely the high-voltage (HV) generators and the induction cells. A HV generator designed to feed the cells with calibrated pulses (150 kV, 50 ns, δV/V magnetic switches. This generator is planned for kHz repetition-rate operation. A prototype induction cell has also been built and tested with a cable generator. An electron injector (1.5 MeV, 1.5kA) has been designed and is now under test: it uses ten induction cells and a thermionic dispenser cathode. Numerical codes have been developed and simulations have been compared with experimental results for HV generators, induction cells, and the injector. An induction accelerating module has been studied and we plan to have the accelerator working at 3 MeV in 1992.

  3. Condensed matter research using the UCSB FEL. [Univ. of California, Santa Barbara Free Electron Laser project

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The University of California, Santa Barbara (UCSB) Free Electron Laser (FEL) project was initiated in 1981 to test the idea of using an electrostatic accelerator in a recirculating beam mode to produce high-power, continuously tunable, coherent far infrared radiation. The development and application of this device to condensed matter research are briefly recounted. Emphasis was on semiconductor research and two-photon experiments. (RWR)

  4. Condensed matter research using the UCSB FEL. Final technical report, May 1, 1984--January 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The University of California, Santa Barbara (UCSB) Free Electron Laser (FEL) project was initiated in 1981 to test the idea of using an electrostatic accelerator in a recirculating beam mode to produce high-power, continuously tunable, coherent far infrared radiation. The development and application of this device to condensed matter research are briefly recounted. Emphasis was on semiconductor research and two-photon experiments. (RWR)

  5. FEL development at the Budker Institute of Nuclear Physics

    Science.gov (United States)

    Vinokurov, N. A.

    1993-07-01

    There are three different FEL projects at the Budker Institute of Nuclear Physics: 1) the FEL on the VEPP-3 storage ring which operates in the visible and ultraviolet region; 2) the high power FEL using a racetrack microtron recuperator (this machine will provide an average power of about tens of kilowatt in the infrared region); and 3) the compact infrared FEL project, using a microton, and a powerful FEL on a dedicated superconducting storage ring, which is under consideration now.

  6. PixFEL: developing a fine pitch, fast 2D X-ray imager for the next generation X-FELs

    Science.gov (United States)

    Ratti, L.; Comotti, D.; Fabris, L.; Grassi, M.; Lodola, L.; Malcovati, P.; Manghisoni, M.; Re, V.; Traversi, G.; Vacchi, C.; Bettarini, S.; Casarosa, G.; Forti, F.; Morsani, F.; Paladino, A.; Paoloni, E.; Rizzo, G.; Benkechkache, M. A.; Dalla Betta, G.-F.; Mendicino, R.; Pancheri, L.; Verzellesi, G.; Xu, H.

    2015-10-01

    The PixFEL project is conceived as the first stage of a long term research program aiming at the development of advanced X-ray imaging instrumentation for applications at the free electron laser (FEL) facilities. The project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging by exploring cutting-edge solutions for sensor development, for integration processes and for readout channel architectures. The main focus is on the development of the fundamental microelectronic building blocks for detector readout and on the technologies for the assembly of a multilayer module with minimum dead area. This work serves the purpose of introducing the main features of the project, together with the simulation results leading to the first prototyping run.

  7. Status report on the development of a high-power UV/IR FEL at CEBAF

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.; Bohn, C.; Dylla, H.F. [Continuous Electron Beam Accelerator Facility, Newport News, VA (United States)] [and others

    1995-12-31

    Last year we presented a design for a kilowatt industrial UV FEL based on a superconducting RF accelerator delivering 5 mA of electron-beam current at 200 MeV with energy recovery to enhance efficiency. Since then, we have progressed toward resolving several issues associated with that design. More exact simulations of the injector have resulted in a more accurate estimate of the injector performance. A new injection method has reduced the longitudinal and transverse emittance at the linac entrance. A more compact lattice has been designed for the UV FEL, and a new recirculation scheme has been identified which greatly increases the threshold for longitudinal instabilities. We decided to use a wiggler from the Advanced Photon Source which leads to a robust high-gain FEL. Analysis of the stability of an RF control system based on CEBAF control modules indicates that only minor modifications will be needed to apply them to this FEL. Detailed magnet specifications, vacuum-chamber beam apertures, and diagnostic specifications have been developed for the recirculation arcs. The design of the optical cavity has been conceptualized, and control systems have been devised to regulate mirror distortion. A half-scale model of one of the end-corner cubes has been built and tested. Finally, three-dimensional simulations have been carried out which indicate that the FEL should exceed its minimum design goals with adequate performance margin.

  8. Connecting Lab-Based Attosecond Science with FEL research

    CERN Document Server

    CERN. Geneva

    2011-01-01

    In the last few years laboratory-scale femtosecond laser-based research using XUV light has developed dramatically following the successful development of attosecond laser pulses by means of high-harmonic generation. Using attosecond laser pulses, studies of electron dynamics on the natural timescale that electronic processes occur in atoms, molecules and solids can be contemplated, providing unprecedented insight into the fundamental role that electrons play in photo-induced processes. In my talk I will briefly review the present status of the attosecond science research field in terms of present and foreseen capabilities, and discuss a few recent applications, including a first example of the use of attosecond laser pulses in molecular science. In addition, I will discuss very recent results of experiments where photoionization of dynamically aligned molecules is investigated using a high-harmonics XUV source. Photoionization of aligned molecules becomes all the more interesting if the experiment is perfo...

  9. Development of intense terahertz coherent synchrotron radiation at KU-FEL

    Energy Technology Data Exchange (ETDEWEB)

    Sei, Norihiro, E-mail: sei.n@aist.go.jp [Research Institute for Measurement and Analytical Instrumentation, National Institute of Advanced Industrial Science and Technology, 1-1-1 Umezono, Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Zen, Heishun; Ohgaki, Hideaki [Institute for Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

    2016-10-01

    We produced intense coherent synchrotron radiation (CSR) in the terahertz (THz) region using an S-band linac at the Kyoto University Free Electron Laser (KU-FEL), which is a mid-infrared free-electron laser facility. The CSR beam was emitted from short-pulse electron bunches compressed by a 180° arc, and was transferred to air at a large solid angle of 0.10 rad. The measured CSR energy was 55 μJ per 7 μs macropulse, and KU-FEL was one of the most powerful CSR sources in normal conducting linear accelerator facilities. The CSR spectra were measured using an uncooled pyroelectric detector and a Michelson-type interferometer designed specifically for the KU-FEL electron beam, and had a maximum at a frequency of 0.11 THz. We found that adjusting the energy slit enhanced the CSR energy and shortened the electron beam bunch length in the CSR spectra measurements. Our results demonstrated that the efficient use of the energy slit can help improve the characteristics of CSR. - Highlights: • We have developed intense coherent synchrotron radiation (CSR) at KU-FEL. • The elevation angle of the CSR was correctly measured by a new technique. • The CSR power extracted to the air was 55 μJ per 7 μs macropulse. • It was demonstrated that an energy slit was effective to improve the CSR properties.

  10. Development of photon beam diagnostics for VUV radiation from a SASE FEL

    CERN Document Server

    Treusch, R; Xu, W; Jastrow, U; Hahn, U; Bittner, L; Feldhaus, J

    2000-01-01

    For the proof-of-principle experiment of self-amplified spontaneous emission (SASE) at short wavelengths on the VUV FEL at DESY a multi-facetted photon beam diagnostics experiment has been developed employing new detection concepts to measure all SASE specific properties on a single pulse basis. The present setup includes instrumentation for the measurement of the energy and the angular and spectral distribution of individual photon pulses. Different types of photon detectors such as PtSi-photodiodes and fast thermoelectric detectors based on YBaCuO-films are used to cover some five orders of magnitude of intensity from the level of spontaneous emission to FEL radiation at saturation. A 1 m normal incidence monochromator in combination with a fast intensified CCD camera allows to select single photon pulses and to record the full spectrum at high resolution to resolve the fine structure due to the start-up from noise.

  11. Experimental results of a sheet-beam, high power, FEL amplifier with application to magnetic fusion research

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, S.; Destler, W.W.; Granatstein, V.L. [Univ. of Maryland, College Park, MD (United States)] [and others

    1995-12-31

    The experimental study of sheet-beam FELs as candidate millimeter-wave sources for heating magnetic fusion plasmas has achieved a major milestone. In a proof-of-principle, pulsed experiment, saturated FEL amplifier operation was achieved with 250 kW of output power at 86 GHz. Input microwave power was 1 kW, beam voltage was 450 kV and beam current was 17 A. The planar wiggler had a peak value of 3.8 kG, a period of 0.96 cm and was 71 cm long. The linear gain of 30 dB, saturated gain of 24 dB and saturated efficiency of 3% all are in good agreement with theoretical prediction. Follow-on work would include development of a thermionic sheet-beam electron-gun compatible with CW FEL operation, adding a section of tapered wiggler to increase the output power to levels in excess of 1 megawatt, and increasing the FEL frequency.

  12. FEL Applications in EUV Lithography

    CERN Document Server

    Goldstein, M; Shroff, Y A; Silverman, P J; Williams, D

    2005-01-01

    Semiconductor industry growth has largely been made possible by regular improvements in lithography. State of the art lithographic tools cost upwards of twenty five million dollars and use 0.93 numerical aperture projection optics with 193nm wavelengths to pattern features for 45 nm node development. Scaling beyond the 32 nm feature size node is expected to require extreme ultraviolet (EUV) wavelength light. EUV source requirements and equipment industry plasma source development efforts are reviewed. Exploratory research on a novel hybrid klystron and high gain harmonic generation FEL with oblique laser seeding will be disclosed. The opportunity and challenges for FELs to serve as a second generation (year 2011-2013) source technology in the semiconductor industry are presented.

  13. Commissioning of the accelerator-recuperator for the FEL at the Siberian Center for Photochemical Research.

    Science.gov (United States)

    Antokhin, E I; Akberdin, R R; Bokov, M A; Bolotin, V P; Deichuli, O I; Dementyev, E N; Dubrovin, A N; Dovgenko, B A; Evtushenko, Yu A; Gavrilov, N G; Gorniker, E I; Kairan, D A; Kholopov, M A; Kiselev, O B; Kolmogorov, V V; Kolobanov, E I; Kondakov, A A; Kondakova, N L; Krutikhin, S A; Kubarev, V V; Kulipanov, G N; Kuper, E A; Kuptsov, I V; Kurkin, G Ya; Leontyevskaya, L G; Loskutov, V Yu; Medvedev, L E; Medvedko, A S; Miginsky, S V; Mironenko, L A; Oreshkov, A D; Ovchar, V K; Petrov, S P; Petrov, V M; Popik, V M; Rotov, E A; Salikova, T V; Sedlyarov, I K; Scheglov, M A; Serednyakov, S S; Shevchenko, O A; Shubin, E I; Skrinsky, A N; Tararyshkin, S V; Timoshina, L A; Tribendis, A G; Veremeenko, V F; Vinokurov, N A; Vobly, P D; Zagorodnikov, E I; Zaigrayeva, N S

    2003-09-01

    A 100 MeV eight-turn accelerator-recuperator intended to drive a high-power infrared free-electron laser (FEL) is currently under construction in Novosibirsk. The first stage of the machine includes a one-turn accelerator-recuperator that contains a full-scale RF system. It was commissioned successfully in June 2002.

  14. FELs, nice toys or efficient tools?

    Science.gov (United States)

    van der Meer, A. F. G.

    2004-08-01

    An FEL is an intrinsically interesting device and pushing its performance presents a natural challenge to a physicist. Nonetheless, the main justification for doing FEL research is of course its potential as a unique, versatile source of radiation to be employed for something useful. After 25 years of FEL research, one may wonder how efficient these tools have become. In this paper, I will reflect on this issue from the perspective of 10 years of operation of FELIX as a user facility.

  15. Present Status and Results from the KAERI Compact THz FEL Facility

    CERN Document Server

    Jeong, Y U; Lee, B C; Park, S H

    2005-01-01

    We have developed a laboratory-scale users facility with a compact terahertz (THz) free electron laser (FEL). The FEL operates in the wavelength range of 100-1200 μm, which corresponds to 0.3-3 THz. The peak power of the FEL micropulse having 30 ps pulse duration is 1 kW and the pulse energy of the 3-μs-FEL-macropulse is approximately 0.3 mJ. The main application of the FEL is THz imaging for bio-medical researches. Transmitted THz imaging of various samples including bugs have been measured. The samples were scanned by a 2-dimensional stage at the focal point of the THz beam. The bugs were not dry because they were killed just before experiments. We could get the transmitted THz imaging of the bugs at 3 THz with the high power THz FEL. THz spectral characteristics of several materials have been studied by the FEL and a THz FTIR spectrometer. We will introduce recent results on the imaging and spectroscopy by the THz FEL.

  16. A status report on the development of a high power UV and IR FEL at CEBAF

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.V.; Bisognano, J.; Bohn, C. [and others

    1996-08-01

    Previously the authors presented a design for a kilowatt demonstration industrial UVFEL. Progress has been made in resolving several design issues identified in that work. More exact simulations of the injector have resulted in a better estimate of the injector performance. A more compact lattice has been designed meeting the design requirements for the UV FEL, and a new design point has been studied which greatly increases the threshold for longitudinal instabilities. A stability analysis of the RF control system has found that only minor modifications from the existing CEBAF controls will be necessary to allow them to be used with a high current, energy-recovery accelerator. Designs for the optical cavity length and figure control systems have been conceptualized and a model of the corner-cube resonator is being built and tested. Finally, three-dimensional simulations of the FEL have been carried out which show that the laser should exceed its minimum design goals for average power.

  17. Development of intense terahertz coherent synchrotron radiation at KU-FEL

    Science.gov (United States)

    Sei, Norihiro; Zen, Heishun; Ohgaki, Hideaki

    2016-10-01

    We produced intense coherent synchrotron radiation (CSR) in the terahertz (THz) region using an S-band linac at the Kyoto University Free Electron Laser (KU-FEL), which is a mid-infrared free-electron laser facility. The CSR beam was emitted from short-pulse electron bunches compressed by a 180° arc, and was transferred to air at a large solid angle of 0.10 rad. The measured CSR energy was 55 μJ per 7 μs macropulse, and KU-FEL was one of the most powerful CSR sources in normal conducting linear accelerator facilities. The CSR spectra were measured using an uncooled pyroelectric detector and a Michelson-type interferometer designed specifically for the KU-FEL electron beam, and had a maximum at a frequency of 0.11 THz. We found that adjusting the energy slit enhanced the CSR energy and shortened the electron beam bunch length in the CSR spectra measurements. Our results demonstrated that the efficient use of the energy slit can help improve the characteristics of CSR.

  18. Development of photoinjector RF cavity for high-power CW FEL

    Science.gov (United States)

    Kurennoy, S. S.; Schrage, D. L.; Wood, R. L.; Young, L. M.; Schultheiss, T.; Christina, V.; Rathke, J.

    2004-08-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high-power CW FEL. A preliminary design of the first, and the most challenging, section of a 700-MHz CW RF normal-conducting photoinjector—a 2.5-cell, pi-mode cavity with solenoidal magnetic field for emittance compensation—is completed. Beam dynamics simulations demonstrate that this cavity with an electric field gradient of 7 MV/m will produce an electron beam at 2.7 MeV with the transverse rms emittance 7 mm mrad at 3 nC of charge per bunch. Electromagnetic field computations combined with a thermal and stress analysis show that the challenging problem of cavity cooling can be successfully resolved. We are in the process of building a 100-mA (3 nC of bunch charge at 33.3 MHz bunch repetition rate) photoinjector for demonstration purposes. Its performance parameters will enable a robust 100-kW-class FEL operation with electron beam energy below 100 MeV. The design is scalable to higher power levels by increasing the electron bunch repetition rate and provides a path to a MW-class amplifier FEL.

  19. Development of photoinjector RF cavity for high-power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S.S. E-mail: kurennoy@lanl.gov; Schrage, D.L.; Wood, R.L.; Young, L.M.; Schultheiss, T.; Christina, V.; Rathke, J

    2004-08-01

    An RF photoinjector capable of producing high continuous average current with low emittance and energy spread is a key enabling technology for high-power CW FEL. A preliminary design of the first, and the most challenging, section of a 700-MHz CW RF normal-conducting photoinjector - a 2.5-cell, pi-mode cavity with solenoidal magnetic field for emittance compensation - is completed. Beam dynamics simulations demonstrate that this cavity with an electric field gradient of 7 MV/m will produce an electron beam at 2.7 MeV with the transverse rms emittance 7 mm mrad at 3 nC of charge per bunch. Electromagnetic field computations combined with a thermal and stress analysis show that the challenging problem of cavity cooling can be successfully resolved. We are in the process of building a 100-mA (3 nC of bunch charge at 33.3 MHz bunch repetition rate) photoinjector for demonstration purposes. Its performance parameters will enable a robust 100-kW-class FEL operation with electron beam energy below 100 MeV. The design is scalable to higher power levels by increasing the electron bunch repetition rate and provides a path to a MW-class amplifier FEL.

  20. Status and Future Plans of JAERI Eergy-Recovery Linac FEL

    CERN Document Server

    Hajima, R; Kikuzawa, N; Minehara, E J; Nagai, R; Nishimori, N; Nishitani, T; Sawamura, M; Yamauchi, T

    2005-01-01

    An energy-recovery linac for a high-power free-electron laser is in operation at Japan Atomic Energy Research Institute (JAERI). In this paper, we report results of research activities and future plans of JAERI ERL-FEL, which are the construction of FEL transport line, the operation of newly-installed RF controller and IOTs, the development of super-lattice photo cathode.

  1. Parameter analysis for a high-gain harmonic generation FEL using a recently developed 3D polychromatic code

    CERN Document Server

    Biedron, S G; Yu, L H

    2000-01-01

    One possible design for a fourth-generation light source is the high-gain harmonic generation (HGHG) free-electron laser (FEL). Here, a coherent seed with a wavelength at a subharmonic of the desired output radiation interacts with the electron beam in an energy-modulating section. This energy modulation is then converted into spatial bunching while traversing a dispersive section (a three-dipole chicane). The final step is passage through an undulator tuned to the desired higher harmonic output wavelength. The coherent seed serves to suppress and can be at a much lower subharmonic of the output radiation. Recently, a 3D code that includes multiple frequencies, multiple undulators (both in quantity and/or type), quadrupole magnets, and dipole magnets was developed to easily simulate HGHG. Here, a brief review of the HGHG theory, the code development, the Accelerator Test Facility's (ATF) HGHG FEL experimental parameters, and the parameter analysis from simulations of this specific experiment will be discussed...

  2. FELS, nice toys or efficient tools?

    NARCIS (Netherlands)

    van der Meer, A. F. G.

    2004-01-01

    An FEL is an intrinsically interesting device and pushing its performance presents a natural challenge to a physicist. Nonetheless, the main justification for doing FEL research is of course its potential as a unique, versatile source of radiation to be employed for something useful. After 25 years

  3. 17th international free electron laser conference and 2nd international FEL users` workshop. Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This workshop and conference were held together to enhance the interaction between FEL builders and users. Current topics of interest in FEL research form the basis for the oral presentations. The program for the User`s workshop was developed in a similar manner. Storage rings, linear accelerators, materials research and applications are all considered topics. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. Two FEL`s in one

    Energy Technology Data Exchange (ETDEWEB)

    Epp, V. [Tomsk Pedagogical Institute (Russian Federation); Nikitin, M. [Tomsk Polytechnical Univ. (Russian Federation)

    1995-12-31

    A new scheme for a FEL operation is proposed. The conventional principle of FEL operation is means that the electron bunch passes through the interaction area of FEL only in one direction. We suggest another possible layout which implies that the electron bunch makes a turn after leaving the wiggler and entries the wiggler at the same end. Actually the wiggler is a kind of a bridge between two storage rings. The electron bunches on the orbit are expected to be adjusted in the way that after one of them leaves the wiggler, another one enters in the opposite direction and in the proper phase with the wave pulse emitted by the previous bunch. So the electron bunch comes in interaction with the amplified electromagnetic wave in both directions i.e. twice per period. It is especially important for the short wavelength FELs, because each reflection from the mirror causes a significant losses of the wave magnitude. The proposed design gives one interaction per each reflection instead of one interaction per two reflections in the traditional scheme. Another way to realize the suggested principle of operating is to insert the wiggler in the electron-positron storage ring. But this layout can be less efficient because of low intensity of the positron beam. The comparison study of radiation from different types of described double wigglers is fulfilled. The synchronization problems are discussed in this paper.

  5. Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL

    CERN Document Server

    Heya, Manabu; Horiike, Hiroshi; Ishii, Katsonuri; Suzuki, Sachiko

    2004-01-01

    A pump-probe technique is essential for a proper understanding of laser interaction with tissue and material. Our pump-probe system divides the incident mid-infrared Free Electron Laser (MIR-FEL) into two beams with equal intensity, and crosses simultaneously the two incoming beams at the same position. One is for a pump beam, another is for a probe beam. Time-resolved absorption spectroscopy involving this technique gives us information on the vibrational dynamics of molecules. We have developed this system for an MIR-FEL using a non-coating ZnSe beam splitter cube. The beam splitter cube is composed of two ZnSe prisms in the shape like a trapezoid. The two pulses with equal intensity are generated due to Fresnel reflection and transmission at the boundary between two prisms, then are reflected due to total reflection at other side boundaries between each prism and air, and illuminate simultaneously the same spot. We have conducted a proof-of-concept of experiment of this system using an MIR-FEL. We showed t...

  6. High-performance UV/VUV optics for the Storage Ring FEL at ELETTRA

    CERN Document Server

    Gatto, A; Kaiser, N; Ristau, D; Guenster, S; Kohlhaas, J; Marsi, M; Trovò, M; Walker, R P

    2002-01-01

    Going to shorter wavelengths beyond the deep ultraviolet involves the development of dedicated optics for FEL with devoted coating techniques and characterizations. Low loss, high reflectivity dielectric mirrors with a long lifetime in a strongly harsh synchrotron radiation environment are required. In February 2001, lasing at 189.7 nm was obtained with Al sub 2 O sub 3 /SiO sub 2 Ion Beam Sputtering mirrors, the shortest wavelength obtained so far with FEL oscillators. In July 2001, 330 mW extracted power was measured with optimized transmission mirrors. Coating research and development correlated to lasing performance obtained so far is reported.

  7. Users program for storage-ring based FEL and synchrotron sources of the Duke FEL Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Straub, K.D.; Barnett, G.; Burnham, B. [and others

    1995-12-31

    The storage ring at the Duke FEL Laboratory was first operated with a stored e-beam in November, 1994. It has now achieved operation energies in excess 1 GeV with more than 100 mA current at 280 MeV. The ring has several ports for FEL and synchrotron light source research. The circulating ring current can be synchronized with the seperate Mark III FEL operating in the 2-9.5 {mu}m IR region. This allows low optical jitter (10-20 ps) between the two sources and thus pump-probe operation. The ring has been configured to drive a number of light sources including the OK-4 FEL system capable of FEL operation between 400 and 65 nm, an inverse Compton scattering source using this undulator which will yield 4-200 MeV gammas, an undulator source at approximately 40 {angstrom} (not an FEL), a mm FEL with inverse compton scattering providing 1-100 keV x-rays and two synchrotron ports from the bend magnets for which the {lambda}{sub c} = 11-12 {angstrom} for 1 GeV. The broadly tunable FEL sources and their associated inverse compton scattering are extremely bright. The initial research proposals, submitted to the Laboratory emphasizes photoelectron spectroscopy, PEEM, high resolution vacuum UV of gases, solid spectroscopy and photochemistry in the UV, X-ray microprobe studies, X-ray microscopy, X-ray holography, X-ray crystallography, Mossbauer spectroscopy, nuclear spectroscopy, neutron production, photon activation therapy and broadband synchrotron as a probe of fast reaction in the IR and near IR.

  8. Development of a pump-probe facility with sub-picosecond time resolution combining a high-power ultraviolet regenerative FEL amplifier and a soft X-ray SASE FEL

    CERN Document Server

    Faatz, B; Feldhaus, J; Krzywinski, J; Pflüger, J; Rossbach, J; Saldin, E L; Schneidmiller, E A; Yurkov, M V

    2001-01-01

    This paper presents the conceptual design of a high power radiation source with laser-like characteristics in the ultraviolet spectral range at the TESLA Test Facility (TTF). The concept is based on the generation of radiation in a regenerative FEL amplifier (RAFEL). The RAFEL described in this paper covers a wavelength range of 200-400 nm and provides 200 fs pulses with 2 mJ of optical energy per pulse. The linac operates at 1% duty factor and the average output radiation power exceeds 100 W. The RAFEL will be driven by the spent electron beam leaving the soft X-ray FEL, thus providing minimal interference between these two devices. The RAFEL output radiation has the same time structure as the X-ray FEL and the UV pulses are naturally synchronized with the soft X-ray pulses from the TTF FEL. Therefore, it should be possible to achieve synchronization close to the duration of the radiation pulses (200 fs) for pump-probe techniques using either an UV pulse as a pump and soft X-ray pulse as a probe, or vice ver...

  9. Diagnostics and Instrumentation for FEL

    CERN Document Server

    Couprie, M E

    2001-01-01

    Free Electron Laser are coherent sources of radiation based on the interaction of a relativistic electron beam in an undulator field. According to the energy of the accelerator, they presently cover a wide spectral range, from the infra-red to the VUV. FELs combine the diagnostics of typical laser systems (for the measurement of spectral and temporal characteristics, the transverse mode pattern, the polarisation) and the diagnostics of relativistic electron beams. The electron beam is characterised in order to evaluate and control the FEL performances, but also in order to measure the effect of the FEL on the electron beam. The FEL characteristics are monitored with various types of detectors, depending mainly on the spectral range. Diagnostics for Linac based Infra Red FELs and storage ring FELs in the UV-VUV will be described. Particular instrumentation, required for FEL operation, such as the optical resonator, possible diagnostics inside the undulator will also be analysed.

  10. First Results from the DUV-FEL Upgrade at BNL

    CERN Document Server

    Wang, Xijie; Murphy, James; Pinayev, Igor; Rakowsky, George; Rose, James; Shaftan, Timur; Sheehy, Brian; Skaritka, John; Wu, Zilu; Yu Li Hua

    2005-01-01

    The DUV-FEL at BNL is the world’s only facility dedicated to laser-seeded FEL R&D and its applications. Tremendous progress was made in both HGHG FEL and its applications in the last couple years.*,** In response to the requests of many users to study chemical science at the facility, the DUV-FEL linac was upgraded from 200 to 300 MeV to enable the HGHG FEL to produce 100 uJ pulses of 100 nm light. This will establish the DUV FEL as a premier user facility for ultraviolet radiation and enable state-of-the-art gas phase photochemistry research. The upgraded facility will also make possible key R&D experiments such as higher harmonic HGHG (n>5) that would lay the groundwork for future X-ray FEL based on HGHG. The upgraded HGHG FEL will operate at the 4th harmonic with the seed laser at either 800 nm or 400nm. The increase of the electron beam energy will be accomplished by installing a 5th linac cavity and two 45 MW klystrons. New HGHG modulator and dispersion sections vacuum chambers w...

  11. FEL-accelerator related diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Jordan; David Douglas; Stephen V. Benson; Pavel Evtuschenko

    2007-08-02

    Free Electron Lasers (FEL) present a unique set of beam parameters to the diagnostics suite. The FEL requires characterization of the full six dimensional phase space of the electron beam at the wiggler and accurate alignment of the electron beam to the optical mode of the laser. In addition to the FEL requirements on the diagnostics suite, the Jefferson Lab FEL is operated as an Energy Recovered Linac (ERL) which imposes additional requirements on the diagnostics. The ERL aspect of the Jefferson Lab FEL requires that diagnostics operate over a unique dynamic range and operate with simultaneous transport of the accelerated and energy recovered beams. This talk will present how these challenges are addressed at the Jefferson Lab FEL.

  12. Multiscale degradations of storage ring FEL optics

    CERN Document Server

    Gatto, A; Amra, C; Boccara, C; Couprie, Marie Emmanuelle; De Ninno, G; Feigl, T; Garzella, D; Grewe, M; Kaiser, N; Marsi, M; Paoloni, S; Reita, V; Roger, J P; Torchio, P; Trovò, M; Walker, R; Wille, K

    2002-01-01

    The advanced understanding of the complete degradation phenomena is crucial in order to develop robust optics for FEL. Under very harsh Synchrotron Radiation conditions, results show that multiscale wavelength damages could be observed, inducing local crystalline structure modifications of the high optical index material with a severe increase of the surface roughness.

  13. Tapered undulators for SASE FELs

    CERN Document Server

    Fawley, W M; Vinokurov, N A

    2002-01-01

    We discuss the use of tapered undulators to enhance the performance of free-electron lasers (FELs) based upon self-amplified spontaneous emission, where the radiation tends to have a relatively broad bandwidth and limited temporal coherence. Using the polychromatic FEL simulation code GINGER, we numerically demonstrate the effectiveness of tapered undulators for parameters corresponding to the Argonne low-energy undulator test line FEL and the proposed linac coherent light source.

  14. High-power FEL design issues - a critical review

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Madey, J.M.J.; O`Shea, P.G. [Duke Univ., Durham, NC (United States)

    1995-12-31

    The high-average power capability of FELs has been much advertised but little realized. In this paper we provide a critical analysis of the technological and economic issues associated with high-average power FEL operation from the UV to near IR. The project of IR FEL for the Siberian Center of photochemical researches is described. The distinguished features of this project are the use of the race-track microtron-recuperator and the {open_quotes}electron output of radiation{close_quotes}. The building for the machine is under reconstruction now. About half of hardware has been manufactured. The assembly of installation began.

  15. Growth of a species, an association, a science: 80 years of growth and development research.

    Science.gov (United States)

    Sherwood, Richard J; Duren, Dana L

    2013-01-01

    Physical anthropological research was codified in the United States with the creation of the American Association of Physical Anthropology (AAPA) in 1929. That same year, a study began in yellow springs, Ohio, with a goal of identifying "what makes people different." The approach used to answer that question was to study the growth and development of Homo sapiens. The resulting study, the Fels Longitudinal Study, is currently the longest continuous study of human growth and development in the world. Although the AAPA and the Fels Longitudinal Study have existed as separate entities for more than 80 years now, it is not surprising, given the relationship between anatomical and developmental research, there has been considerable overlap between the two. As the field of physical anthropology has blossomed to include subdisciplines such as forensics, genetics, primatology, as well as sophisticated statistical methodologies, the importance of growth and development research has escalated. Although current Fels Longitudinal Study research is largely directed at biomedical questions, virtually all findings are relevant to physical anthropology, providing insights into basic biological processes and life history parameters. Some key milestones from the early years of the AAPA and the Fels Longitudinal Study are highlighted here that address growth and development research in physical anthropology. These are still held as fundamental concepts that underscore the importance of this line of inquiry, not only across the subdisciplines of physical anthropology, but also among anthropological, biological, and biomedical inquiries. Copyright © 2012 Wiley Periodicals, Inc.

  16. Growth of a Species, an Association, a Science: 80 Years of Growth and Development Research

    Science.gov (United States)

    Sherwood, Richard J.; Duren, Dana L.

    2014-01-01

    Physical anthropological research was codified in the United States with the creation of the American Association of Physical Anthropology (AAPA) in 1929. That same year, a study began in yellow springs, Ohio, with a goal of identifying “what makes people different.” The approach used to answer that question was to study the growth and development of Homo sapiens. The resulting study, the Fels Longitudinal Study, is currently the longest continuous study of human growth and development in the world. Although the AAPA and the Fels Longitudinal Study have existed as separate entities for more than 80 years now, it is not surprising, given the relationship between anatomical and developmental research, there has been considerable overlap between the two. As the field of physical anthropology has blossomed to include subdisciplines such as forensics, genetics, primatology, as well as sophisticated statistical methodologies, the importance of growth and development research has escalated. Although current Fels Longitudinal Study research is largely directed at biomedical questions, virtually all findings are relevant to physical anthropology, providing insights into basic biological processes and life history parameters. Some key milestones from the early years of the AAPA and the Fels Longitudinal Study are highlighted here that address growth and development research in physical anthropology. These are still held as fundamental concepts that underscore the importance of this line of inquiry, not only across the subdisciplines of physical anthropology, but also among anthropological, biological, and biomedical inquiries. PMID:23283658

  17. Experimental setups for FEL-based four-wave mixing experiments at FERMI

    Energy Technology Data Exchange (ETDEWEB)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs–nm time–length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  18. Experimental setups for FEL-based four-wave mixing experiments at FERMI.

    Science.gov (United States)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs-nm time-length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  19. Experimental setups for FEL-based four-wave mixing experiments at FERMI

    Energy Technology Data Exchange (ETDEWEB)

    Bencivenga, Filippo; Zangrando, Marco; Svetina, Cristian; Abrami, Alessandro; Battistoni, Andrea; Borghes, Roberto; Capotondi, Flavio; Cucini, Riccardo; Dallari, Francesco; Danailov, Miltcho; Demidovich, Alexander; Fava, Claudio; Gaio, Giulio; Gerusina, Simone; Gessini, Alessandro; Giacuzzo, Fabio; Gobessi, Riccardo; Godnig, Roberto; Grisonich, Riccardo; Kiskinova, Maya; Kurdi, Gabor; Loda, Giorgio; Lonza, Marco; Mahne, Nicola; Manfredda, Michele; Mincigrucci, Riccardo; Pangon, Gianpiero; Parisse, Pietro; Passuello, Roberto; Pedersoli, Emanuele; Pivetta, Lorenzo; Prica, Milan; Principi, Emiliano; Rago, Ilaria; Raimondi, Lorenzo; Sauro, Roberto; Scarcia, Martin; Sigalotti, Paolo; Zaccaria, Maurizio; Masciovecchio, Claudio

    2016-01-01

    The recent advent of free-electron laser (FEL) sources is driving the scientific community to extend table-top laser research to shorter wavelengths adding elemental selectivity and chemical state specificity. Both a compact setup (mini-TIMER) and a separate instrument (EIS-TIMER) dedicated to four-wave-mixing (FWM) experiments has been designed and constructed, to be operated as a branch of the Elastic and Inelastic Scattering beamline: EIS. The FWM experiments that are planned at EIS-TIMER are based on the transient grating approach, where two crossed FEL pulses create a controlled modulation of the sample excitations while a third time-delayed pulse is used to monitor the dynamics of the excited state. This manuscript describes such experimental facilities, showing the preliminary results of the commissioning of the EIS-TIMER beamline, and discusses original experimental strategies being developed to study the dynamics of matter at the fs–nm time–length scales. In the near future such experimental tools will allow more sophisticated FEL-based FWM applications, that also include the use of multiple and multi-color FEL pulses.

  20. FEL Design Studies at LBNL: Activities and Plans

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, John N.; Fawley, W.; Lidia, S.; Padmore, H.; Penn, G.; Pogorelov, I.; Qiang, J.; Sannibale, F.; Staples, J.; Steier, C.; Venturini, M.; Wan, W.; Wilcox, R.; Zholents, A.

    2007-03-01

    LBNL staff are currently pursuing R&D for future x-ray FELs, and participate in two FEL construction projects. Our strategy is to address the most fundamental challenges, which are the cost-drivers and performance limitations of FEL facilities. An internally funded R&D program is aimed at investigating accelerator physics and technologies in three key areas: (1) Theoretical study, modeling, and experimental development of low emittance, high quantum efficiency cathodes; (2) Design studies of electron beam delivery systems, including emittance manipulations, high-resolution modeling of 6-D phase space, and low-emittance beam transport; and (3) Design studies of optical manipulations of electron beams for seeded and SASE FELs, providing short x-ray pulses of variable duration, synchronous with the seed and pump laser sources, and also long transform-limited pulses with a narrow bandwidth. Design studies of means for production of attosecond x-ray pulses at various wavelengths. We are collaborators in the FERMI{at}Elettra seeded FEL facility under construction at Sincrotrone Trieste, Italy, participating in accelerator design and FEL physics studies, and mechanical and electrical engineering. We are participating in the LCLS project at SLAC, implementing our design of stabilized timing and synchronization systems. Here we outline our long-term objectives, and current activities.

  1. Renewal of KU-FEL Facility

    CERN Document Server

    Kii, Toshiteru; Masuda, Kai; Murakami, Shio; Ohgaki, Hideaki; Yamazaki, Tetsuo; Yoshikawa, Kiyoshi; Zen, Heishun

    2004-01-01

    Users demands to a high power tunable IR laser are increasing in Japan in energy-related science, such as basic study of high-efficiency solar cells, generation of new energy source of alcohol and/or H2 from polluted gas, and separation of DNA and/or RNA. To satisfy these demands, we decided to renew our FEL facility more user friendly and to operate more flexibly. Construction and fundamental studies on the KU-FEL have been carried out at a building of Institute of Chemical Research where few other accelerators are operating. Therefore, available machine time for our experiments is quite limited. We are now modifying the room by adding concrete walls of 2-m thickness and some space for users will be available. The present FEL system will be moved to the room A photocathode RF-gun system will be nearly added to the system and the present thermionic RF-gun will be used ternatively according to the demands of users. The photocathode material will be Cs2Te. The room with the shielding will be completed in June, ...

  2. Industrial Applications of High Average Power FELS

    CERN Document Server

    Shinn, Michelle D

    2005-01-01

    The use of lasers for material processing continues to expand, and the annual sales of such lasers exceeds $1 B (US). Large scale (many m2) processing of materials require the economical production of laser powers of the tens of kilowatts, and therefore are not yet commercial processes, although they have been demonstrated. The development of FELs based on superconducting RF (SRF) linac technology provides a scaleable path to laser outputs above 50 kW in the IR, rendering these applications economically viable, since the cost/photon drops as the output power increases. This approach also enables high average power ~ 1 kW output in the UV spectrum. Such FELs will provide quasi-cw (PRFs in the tens of MHz), of ultrafast (pulsewidth ~ 1 ps) output with very high beam quality. This talk will provide an overview of applications tests by our facility's users such as pulsed laser deposition, laser ablation, and laser surface modification, as well as present plans that will be tested with our upgraded FELs. These upg...

  3. Proposal for Research on High-Brightness Cathodes for High-Power Free-Electron Lasers (FEL)

    Science.gov (United States)

    2013-05-09

    diamond field-emitter array (DFEA). The second is the gridded thermionic cathode, based on the development of gridded cathodes for high-power microwave ...possible as a method of increasing current density in exchange for higher turn-on field. Oxidation and deposition Diamond seeding : We now utilize...atmosphere or vacuum (~107 Torr) after the initial heat treatment results in performance that is slightly lower than that for operation at 450°C. This

  4. Thin-film deposition method assisted by mid-infrared-FEL

    CERN Document Server

    Yasumoto, M; Ishizu, A; Tsubouchi, N; Awazu, K; Umesaki, N

    2001-01-01

    We propose the novel application of the mid-infrared (MIR) FEL to the thin-film fabrication process. During the application, a substrate on which a thin film is being fabricated by a conventional method is simultaneously irradiated by the MIR FEL. The MIR FEL induces the fabricated molecules into the excited state of the stretching vibration energy, when the photon energy of the MIR FEL corresponds to one of the molecules. Therefore, the method can assist the thin-film fabrication quasi-independent of the substrate temperature. The method has the advantages of application on a temperature sensitive substrate and selective fabrication due to the tunable wavelength of the MIR FEL. In order to realize the method, we developed two thin film fabrication devices; an MIR FEL assisted RF sputtering device and an MIR FEL assisted laser ablation deposition device. For the method, the intensity of the assisted MIR FEL is an important problem. Thus the cross-section of the MIR FEL intensity profile is shown and the propa...

  5. FEL simulations for the LCLS

    CERN Document Server

    Nuhn, H D

    1999-01-01

    A first design study report has recently been completed (The LCLS Design Study Group, LCLS Design Study Report, April 1998, SLAC-R-521) for the linac coherent light source (LCLS), a proposal to build an X-ray free electron laser (FEL) at the Stanford Linear Accelerator Center (SLAC) as a single pass self-amplified spontaneous emission (SASE) amplifier. The proposal includes the use of a very low emittance electron beam accelerated up to 15 GeV by the last third of the SLAC linac to produce sub-picosecond X-ray pulses with high brightness and full transverse coherence in a 112-m long undulator. Many aspects of the FEL design have been analyzed with FEL simulation codes. The paper discusses some of the results of these aspects, i.e. temporal X-ray pulse structure and power spectrum, trajectory errors and effects of undulator beam tube wakefields.

  6. Real time diagnostic for operation at a CW low voltage FEL

    Energy Technology Data Exchange (ETDEWEB)

    Balfour, C.; Shaw, A.; Mayhew, S.E. [and others

    1995-12-31

    At Liverpool University, a system for single user control of an FEL has been designed to satisfy the low voltage FEL (ie 200kV) operational requirements. This system incorporates many aspects of computer automation for beam diagnostics, radiation detection and vacuum system management. In this paper the results of the development of safety critical control systems critical control systems are reported.

  7. Injection system for microtron-based terehertz FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kazakevich, Grigory M.; Kuznetsov, Gennady I.; Pavlov, Viatcheslav M.; /Novosibirsk, IYF; Jeong, Young Uk; Park, Seong Hee; Lee, Byung Cheol; /KAERI, Taejon

    2005-09-01

    A reliable injection system of the widely tunable microtron-based terahertz Free Electron Laser (FEL) has been developed and during last few years provides stable operation of the FEL for users. The system is based on the long-life thermionic cathode assembly using 2.5 mm-in diameter monocrystalline LaB{sub 6} emitter, heated by the tungsten cylindrical filament with the power consumption less than 55 W. The cathode emits the macro-pulse current in the range of 1-1.4 A providing operation of the terahertz FEL during more than 1000 h. The cathode assembly is installed on the cover of the I-type microtron accelerating cavity in location providing an efficient injection for the acceleration with variable number of orbits. This variation widely changes the energy of the electron beam and allows on-the-fly retuning of the FEL in the range of 1-3 THz. Pulse-signal system stabilizing the emission current prevents randomized break-downs in the accelerating cavity and decreases fluctuations of the power of the FEL radiation. The standard deviation of the fluctuations was measured to be less than 10% during long-time operation.

  8. Injection System for Microtron-Based Terahertz FEL

    CERN Document Server

    Kazakevich, G M

    2005-01-01

    A reliable injection system of the widely tunable microtron-based terahertz Free Electron Laser (FEL) has been developed and during last few years provides stable operation of the FEL for users. The system is based on the long-life thermionic cathode assembly using 2.5 mm-in diameter monocrystalline LaB6 emitter, heated by the tungsten cylindrical filament with the power consumption less than 50 W. The cathode emits the macro-pulse current in the range of 1-1.4 A providing operation of the terahertz FEL during more than 1000 h. The cathode assembly is installed on the cover of the I-type microtron accelerating cavity in location providing an efficient injection for the acceleration with variable number of orbits. This variation widely changes the energy of the electron beam and allows on-the-fly retuning of the FEL in the range of 1-3 THz. Pulse-signal system stabilizing the emission current prevents randomized break-downs in the accelerating cavity and decreases macro-pulse power fluctuations of the FEL radi...

  9. A high-average-power FEL for industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Dylla, H.F.; Benson, S.; Bisognano, J.

    1995-12-31

    CEBAF has developed a comprehensive conceptual design of an industrial user facility based on a kilowatt UV (150-1000 nm) and IR (2-25 micron) FEL driven by a recirculating, energy-recovering 200 MeV superconducting radio-frequency (SRF) accelerator. FEL users{endash}CEBAF`s partners in the Laser Processing Consortium, including AT&T, DuPont, IBM, Northrop-Grumman, 3M, and Xerox{endash}plan to develop applications such as polymer surface processing, metals and ceramics micromachining, and metal surface processing, with the overall effort leading to later scale-up to industrial systems at 50-100 kW. Representative applications are described. The proposed high-average-power FEL overcomes limitations of conventional laser sources in available power, cost-effectiveness, tunability and pulse structure. 4 refs., 3 figs., 2 tabs.

  10. Photoinjector RF cavity design for high power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Young, L. M. (Lloyd M.); Schultheiss, T. (Thomas); Christina, V.; Rathke, J.

    2003-01-01

    The project is under way to develop a key enabling technology for highpower CW FEL: an RF photoinjector capable of producing continuous average current greater than 100 mA. The specific aim is a n-mode, normalconducting IW photoinjector, 3 nC of bunch charge, 100 mA of current (at 33.3-MHz bunch repetition rate) and emittance less than 10 mm-mad. This level of performance will enable robust 100-kW-class FEL operation with electron beam energy <100 MeV, thereby reducing the size and cost of the FEL. This design is scalable to the MW power level by increasing the electron bunch repetition rate to a higher value. The major challenges are emittance control and high heat flux within the CW 700-MHz RF cavities. Results of RF cavity design and cooling schemes are presented, including both high-velocity water and liquid-nitrogen cooling options.

  11. FERMI@Elettra FEL Design Technical Optimization Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Fawley, William; Penn, Gregory; Allaria, Enrico; De Ninno,Giovanni; Graves, William

    2006-07-31

    This is the final report of the FEL Design Group for the Technical Optimization Study for the FERMI{at}ELETTRA project. The FERMI{at}ELETTRA project is based on the principle of harmonic upshifting of an initial ''seed'' signal in a single pass, FEL amplifier employing multiple undulators. There are a number of FEL physics principles which underlie this approach to obtaining short wavelength output: (1) the energy modulation of the electron beam via the resonant interaction with an external laser seed (2) the use of a chromatic dispersive section to then develop a strong density modulation with large harmonic overtones (3) the production of coherent radiation by the microbunched beam in a downstream radiator. Within the context of the FERMI project, we discuss each of these elements in turn.

  12. Plasma switch as a temporal overlap tool for pump-probe experiments at FEL facilities

    Science.gov (United States)

    Harmand, M.; Murphy, C. D.; Brown, C. R. D.; Cammarata, M.; Döppner, T.; Düsterer, S.; Fritz, D.; Förster, E.; Galtier, E.; Gaudin, J.; Glenzer, S. H.; Göde, S.; Gregori, G.; Hilbert, V.; Hochhaus, D.; Laarmann, T.; Lee, H. J.; Lemke, H.; Meiwes-Broer, K.-H.; Moinard, A.; Neumayer, P.; Przystawik, A.; Redlin, H.; Schulz, M.; Skruszewicz, S.; Tavella, F.; Tschentscher, T.; White, T.; Zastrau, U.; Toleikis, S.

    2012-08-01

    We have developed an easy-to-use and reliable timing tool to determine the arrival time of an optical laser and a free electron laser (FEL) pulses within the jitter limitation. This timing tool can be used from XUV to X-rays and exploits high FELs intensities. It uses a shadowgraph technique where we optically (at 800 nm) image a plasma created by an intense XUV or X-ray FEL pulse on a transparent sample (glass slide) directly placed at the pump - probe sample position. It is based on the physical principle that the optical properties of the material are drastically changed when its free electron density reaches the critical density. At this point the excited glass sample becomes opaque to the optical laser pulse. The ultra-short and intense XUV or X-ray FEL pulse ensures that a critical electron density can be reached via photoionization and subsequent collisional ionization within the XUV or X-ray FEL pulse duration or even faster. This technique allows to determine the relative arrival time between the optical laser and the FEL pulses in only few single shots with an accuracy mainly limited by the optical laser pulse duration and the jitter between the FEL and the optical laser. Considering the major interest in pump-probe experiments at FEL facilities in general, such a femtosecond resolution timing tool is of utmost importance.

  13. Status of the project of Novosibirsk high power FEL

    Energy Technology Data Exchange (ETDEWEB)

    Pinayev, I.V.; Erg, G.I.; Gavrilov, N.G. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)] [and others

    1995-12-31

    The project of IR FEL for the Siberian Center of photochemical researches is described. The distinguished features of this project are the use of the race-track microtron-recuperator and the {open_quotes}electron output of radiation{close_quotes}. The building for the machine is under reconstruction now. About half of hardware has been manufactured. The assembly of installation began.

  14. Contributions to the FEL2005 conference

    Energy Technology Data Exchange (ETDEWEB)

    Grimm, O. (comp.)

    2005-07-01

    The following topics were dealt with: First lasing at 32 nm of the VUV-FEL at DESY, properties of the radiation from VUV-FEL at DESY, accelerator lay out and physics of X-ray free-electron lasers, bunch compression stability dependence on RF parameters, undulator systems and photon diagnostic for the European XFEL project, electron beam characterization at PITZ and the VUV-FEL at DESY, high precision optical synchronization systems for X-ray free electron lasers, optical laser synnchronized for the DESY VUV-FEL for two-color pump probe experiments, properties of the third harmonic of the SASE FEL radiation, detector response and beam line transmission measurements with far-infrared radiation, upgrades of the laser beam-line at PITZ, bunch length measurements using a Martin-Puplett interferometer at the VUV-FEL, next generation synchronization system for the VUV-FEL at DESY, transverse electron beam diagnostics at the VYV-FEL at DESY, the infrared undulator project at the VUV-FEL, misconceptions regarding second harmonic generation in X-ray free-electron lasers, influence of an energy chirp on SASE FEL operation, design considerations for the 4GLS XUV-FEL, broadband single shot spectrometer, commissioning of TTF2 bunch compressors for 20 fs SASE source, observation of femtosecond bunch length using a transverse deflecting structure, measurement of slice-emittance using a transverse deflecting structure, the injector of the VUV-FEL at DESY, spectral decoding electro-optic measurements for longitudinal bunch diagnostics at the DESY VUV-FEL, longitudinal phase space studies at PITZ, modelling the transverse phase space and core emittance studies at PITZ, measurements of thermal emittance for cesium telluride photocathodes at PITZ, status and first results from the upgraded PITZ facility, commissioning of the SPARC movable emittance meter and its first operation at PITZ. (HSI)

  15. The GALAXIE all-optical FEL project

    Energy Technology Data Exchange (ETDEWEB)

    Rosenzweig, J. B.; Arab, E.; Andonian, G.; Cahill, A.; Fitzmorris, K.; Fukusawa, A.; Hoang, P.; Jovanovic, I.; Marcus, G.; Marinelli, A.; Murokh, A.; Musumeci, P.; Naranjo, B.; O' Shea, B.; O' Shea, F.; Ovodenko, A.; Pogorelsky, I.; Putterman, S.; Roberts, K.; Shumail, M. [Dept. of Physics and Astronomy, University of California, Los Angeles, 405 Hilgard Ave., Los Angeles, CA 90034 (United States); Dept. of Mechanical and Nuclear Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Dept. of Physics and Astronomy, University of California, Los Angeles, 405 Hilgard Ave., Los Angeles, CA 90034 (United States); and others

    2012-12-21

    We describe a comprehensive project, funded under the DARPA AXiS program, to develop an all-optical table-top X-ray FEL based on dielectric acceleration and electromagnetic undulators, yielding a compact source of coherent X-rays for medical and related applications. The compactness of this source demands that high field (>GV/m) acceleration and undulation-inducing fields be employed, thus giving rise to the project's acronym: GV/m AcceLerator And X-ray Integrated Experiment (GALAXIE). There are numerous physics and technical hurdles to surmount in this ambitious scenario, and the integrated solutions include: a biharmonic photonic TW structure, 200 micron wavelength electromagnetic undulators, 5 {mu}m laser development, ultra-high brightness magnetized/asymmetric emittance electron beam generation, and SASE FEL operation. We describe the overall design philosophy of the project, the innovative approaches to addressing the challenges presented by the design, and the significant progress towards realization of these approaches in the nine months since project initialization.

  16. The PixFEL project: Progress towards a fine pitch X-ray imaging camera for next generation FEL facilities

    Science.gov (United States)

    Rizzo, G.; Batignani, G.; Benkechkache, M. A.; Bettarini, S.; Casarosa, G.; Comotti, D.; Dalla Betta, G.-F.; Fabris, L.; Forti, F.; Grassi, M.; Lodola, L.; Malcovati, P.; Manghisoni, M.; Mendicino, R.; Morsani, F.; Paladino, A.; Pancheri, L.; Paoloni, E.; Ratti, L.; Re, V.; Traversi, G.; Vacchi, C.; Verzellesi, G.; Xu, H.

    2016-07-01

    The INFN PixFEL project is developing the fundamental building blocks for a large area X-ray imaging camera to be deployed at next generation free electron laser (FEL) facilities with unprecedented intensity. Improvement in performance beyond the state of art in imaging instrumentation will be explored adopting advanced technologies like active edge sensors, a 65 nm node CMOS process and vertical integration. These are the key ingredients of the PixFEL project to realize a seamless large area focal plane instrument composed by a matrix of multilayer four-side buttable tiles. In order to minimize the dead area and reduce ambiguities in image reconstruction, a fine pitch active edge thick sensor is being optimized to cope with very high intensity photon flux, up to 104 photons per pixel, in the range from 1 to 10 keV. A low noise analog front-end channel with this wide dynamic range and a novel dynamic compression feature, together with a low power 10 bit analog to digital conversion up to 5 MHz, has been realized in a 110 μm pitch with a 65 nm CMOS process. Vertical interconnection of two CMOS tiers will be also explored in the future to build a four-side buttable readout chip with high density memories. In the long run the objective of the PixFEL project is to build a flexible X-ray imaging camera for operation both in burst mode, like at the European X-FEL, or in continuous mode with the high frame rates anticipated for future FEL facilities.

  17. The PixFEL project: Progress towards a fine pitch X-ray imaging camera for next generation FEL facilities

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, G., E-mail: giuliana.rizzo@pi.infn.it [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Batignani, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Benkechkache, M.A. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017, Constantine (Algeria); Bettarini, S.; Casarosa, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Comotti, D. [Università di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Dalla Betta, G.-F. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); TIFPA INFN, I-38123 Trento (Italy); Fabris, L. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); Forti, F. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Grassi, M.; Lodola, L.; Malcovati, P. [Università di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Manghisoni, M. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); and others

    2016-07-11

    The INFN PixFEL project is developing the fundamental building blocks for a large area X-ray imaging camera to be deployed at next generation free electron laser (FEL) facilities with unprecedented intensity. Improvement in performance beyond the state of art in imaging instrumentation will be explored adopting advanced technologies like active edge sensors, a 65 nm node CMOS process and vertical integration. These are the key ingredients of the PixFEL project to realize a seamless large area focal plane instrument composed by a matrix of multilayer four-side buttable tiles. In order to minimize the dead area and reduce ambiguities in image reconstruction, a fine pitch active edge thick sensor is being optimized to cope with very high intensity photon flux, up to 10{sup 4} photons per pixel, in the range from 1 to 10 keV. A low noise analog front-end channel with this wide dynamic range and a novel dynamic compression feature, together with a low power 10 bit analog to digital conversion up to 5 MHz, has been realized in a 110 μm pitch with a 65 nm CMOS process. Vertical interconnection of two CMOS tiers will be also explored in the future to build a four-side buttable readout chip with high density memories. In the long run the objective of the PixFEL project is to build a flexible X-ray imaging camera for operation both in burst mode, like at the European X-FEL, or in continuous mode with the high frame rates anticipated for future FEL facilities.

  18. High Average Power Optical FEL Amplifiers

    CERN Document Server

    Ben-Zvi, I; Litvinenko, V

    2005-01-01

    Historically, the first demonstration of the FEL was in an amplifier configuration at Stanford University. There were other notable instances of amplifying a seed laser, such as the LLNL amplifier and the BNL ATF High-Gain Harmonic Generation FEL. However, for the most part FELs are operated as oscillators or self amplified spontaneous emission devices. Yet, in wavelength regimes where a conventional laser seed can be used, the FEL can be used as an amplifier. One promising application is for very high average power generation, for instance a 100 kW average power FEL. The high electron beam power, high brightness and high efficiency that can be achieved with photoinjectors and superconducting energy recovery linacs combine well with the high-gain FEL amplifier to produce unprecedented average power FELs with some advantages. In addition to the general features of the high average power FEL amplifier, we will look at a 100 kW class FEL amplifier is being designed to operate on the 0.5 ampere Energy Recovery Li...

  19. Recent Progress of the NIJI-IV VUV/IR FEL

    CERN Document Server

    Sei, N; Watanabe, K W; Yamada, K Y; Yasumoto, M Y

    2005-01-01

    Free electron lasers (FELs) are being developed in a broad wavelength region from the VUV to the IR with the compact storage ring NIJI-IV at AIST. In the DUV and VUV regions, the FEL is used as an intense light source for real-time surface observation with the photoelectron emission microscopy. To extend the application field of the NIJI-IV FEL, for example to the structural analysis of proteins, experiments to obtain FEL oscillations at the wavelength below 195 nm are going on. In addition, a 3.6-m optical klystron, ETLOK-III, for developing infrared FELs has been installed in the north straight section of the NIJI-IV. Fundamental and higher harmonic spontaneous emissions from the ETLOK-III were observed in the visible and near-infrared regions. It was expected that the FEL gain for the 3rd harmonics exceed 5%. In the presentation, we will report the recent results of the VUV and IR FEL experiments.

  20. Design of energy-recovery transport for the JAERI FEL driven by a superconducting linac

    CERN Document Server

    Hajima, R; Nagai, R; Kikuzawa, N; Nishimori, N; Shizuma, T; Minehara, E J; Vinokurov, N A

    2000-01-01

    A high-average power free-electron laser driven by a superconducting linac has been developed in Japan Atomic Energy Research Institute (JAERI), and stable laser output over 0.1 kW in infrared region is now available. For further increasing of FEL output power, installing energy-recovery transport has been planned. The lattice design for the energy-recovery transport is discussed in the present paper. It is found that a recirculation transport, which fulfills the requirements for energy acceptance and isochronicity, can be realized by adding another triple-bend arc to the existing beam line.

  1. Electron Beam Characterization at PITZ and the VUV-FEL at DESY

    CERN Document Server

    Honkavaara, K

    2005-01-01

    The VUV-FEL being commissioned at DESY Hamburg is a user facility for SASE FEL radiation in the VUV wavelength range. The quality of the high brightness electron beam driving the VUV-FEL plays an important role for the performance of the facility. Prior to installation, the electron photo-injector of the VUV-FEL has been fully tested and characterized at the PITZ photo injector test facility at DESY Zeuthen, dedicated to develop high brightness electron sources for FEL projects like the VUV-FEL and the XFEL. We summarize the results on transverse emittance optimization at PITZ and report on the upgrade of the PITZ facility presently under construction. Results on transverse emittance optimization and measurements at the VUV-FEL are presented. Projected emittances around 1.4 mm mrad for 90% of a 1 nC bunch have been regularly measured. In addition, recent measurements of the longitudinal bunch profile after compression using a transverse deflecting cavity are presented.

  2. Derivation of FEL Gain Using Wakefield Approach

    Energy Technology Data Exchange (ETDEWEB)

    Stupakov, Gennady V.

    2003-05-27

    We describe the one-dimensional SASE FEL instability using the wake approach. First, we obtain an expression for the longitudinal 1-D wake in a helical undulator. We then show that taking into account the retardation effect in the Vlasov equation with the proper wake leads to the correct result for the FEL instability, in agreement with the traditional theory.

  3. Optical Fibre Dosimeter for SASE FEL Undulators

    CERN Document Server

    Körfer, M

    2003-01-01

    Single pass Free Electron Lasers (FELs) based on self-amplified spontaneous emission (SASE) are developed for high brightness and short wavelength applications. They use permanent magnet undulators which are radiation sensitive devices. During accelerator commissioning beam losses can appear anywhere along the undulator line. To avoid damage of the permanent magnets due to radiation, an optical fibre dosimeter system can be used. The increase of absorption caused by ionizing radiation is measured in radiation sensitive optical fibers. The dose system enables relatively fast particle loss tuning during accelerator operation and allows the monitoring of the accumulated dose. Dose measurements in narrow gaps which are inaccessible for any other (online) dosimeter type become possible. The electromagnetic insensitivity of optical fibre sensor is an advantage of applications in strong magnetic undulator fields. At each location the light absorption is measured by using an optical power-meter. The dynamic range is ...

  4. A Coherent Compton Backscattering High Gain FEL using an X-Band Microwave Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Tantawi, S.; Dolgashev, V.; Nantista, C.; /SLAC; Pellegrini, C.; Rosenzweig, J.; Travish, G.; /UCLA

    2005-12-14

    High power microwave sources at X-Band, delivering 400 to 500 of megawatts for about 400 ns, have been recently developed. These sources can power a microwave undulator with short period and large gap, and can be used in short wavelength FELs reaching the nm region at a beam energy of about 1 GeV. We present here an experiment designed to demonstrate that microwave undulators have the field quality needed for high gain FELs.

  5. Design Formulas for VUV and X-Ray FELs

    CERN Document Server

    Saldin, Evgeny L; Yurkov, Mikhail V

    2004-01-01

    Simple formulas for optimization of VUV and X-ray SASE FELs are presented. The FEL gain length and the optimal beta-function are explicitly expressed in terms of the electron beam and undulator parameters. The FEL saturation length is estimated taking into account energy diffusion due to quantum fluctuations of the undulator radiation. Examples of the FEL optimization are given. Parameters of a SASE FEL, operating at the Compton wavelength, are suggested.

  6. Enhancing FEL Power with Phase Shifters

    Energy Technology Data Exchange (ETDEWEB)

    Ratner, Daniel; /Stanford U.; Chao, Alex; Huang, Zhirong; /SLAC

    2010-07-30

    Tapering the undulator parameter is a well-known method for maintaining the resonant condition past saturation, and increasing Free Electron Laser (FEL) efficiency. In this paper, we demonstrate that shifting the electron bunch phase relative to the radiation is equivalent to tapering the undulator parameter. Using discrete phase changes derived from optimized undulator tapers for the Linac Coherent Light Source (LCLS) x-ray FEL, we show that appropriate phase shifts between undulator sections can reproduce the power enhancement of undulator tapers. Phase shifters are relatively easy to implement and operate, and could be used to aid or replace undulator tapers in optimizing FEL performance.

  7. Fused rock from Köfels, Tyrol

    Science.gov (United States)

    Milton, Daniel J.

    1964-01-01

    The vesicular glass from Köfels, Tyrol, contains grains of quartz that have been partially melted but not dissolved in the matrix glass. This phenomenon has been observed in similar glasses formed by friction along a thrust fault and by meteorite impact, but not in volcanic glasses. The explosion of a small nuclear device buried behind a steep slope produced a geologic structure that is a good small-scale model of that at Köfels. Impact of a large meteorite would have an effect analogous to that of a subsurface nuclear explosion and is the probable cause of the Köfels feature.

  8. Field Encapsulation Library The FEL 2.2 User Guide

    Science.gov (United States)

    Moran, Patrick J.; Henze, Chris; Ellsworth, David

    1999-01-01

    This document describes version 2.2 of the Field Encapsulation Library (FEL), a library of mesh and field classes. FEL is a library for programmers - it is a "building block" enabling the rapid development of applications by a user. Since FEL is a library intended for code development, it is essential that enough technical detail be provided so that one can make full use of the code. Providing such detail requires some assumptions with respect to the reader's familiarity with the library implementation language, C++, particularly C++ with templates. We have done our best to make the explanations accessible to those who may not be completely C++ literate. Nevertheless, familiarity with the language will certainly help one's understanding of how and why things work the way they do. One consolation is that the level of understanding essential for using the library is significantly less than the level that one should have in order to modify or extend the library. One more remark on C++ templates: Templates have been a source of both joy and frustration for us. The frustration stems from the lack of mature or complete implementations that one has to work with. Template problems rear their ugly head particularly when porting. When porting C code, successfully compiling to a set of object files typically means that one is almost done. With templated C++ and the current state of the compilers and linkers, generating the object files is often only the beginning of the fun. On the other hand, templates are quite powerful. Used judiciously, templates enable more succinct designs and more efficient code. Templates also help with code maintenance. Designers can avoid creating objects that are the same in many respects, but not exactly the same. For example, FEL fields are templated by node type, thus the code for scalar fields and vector fields is shared. Furthermore, node type templating allows the library user to instantiate fields with data types not provided by the FEL

  9. Upgrade of the L-Band Linac at ISIR, Osaka University for a Far-Infrared FEL

    CERN Document Server

    Kato, Ryukou; Kashiwagi, Shigeru; Suemine, Shoji; Yamamoto, Tamotsu

    2004-01-01

    We are developing the far-infrared free-electron laser (FEL) using the L-band electron linac at the Institute of Scientific and Industrial Research (ISIR), Osaka University. The first lasing of the FEL was obtained at wavelengths from 32 to 40 μm in 1994, and the wavelength region has been extended up to 150 μm. The linac was designed and constructed for producing the high-intensity single-bunch beam for pulse radiolysis, so that the filling time of the accelerating structure is 1.8 μs long and the maximum macropulse length of the electron beam is limited to 2 μs, though the duration of the RF pulse can be extended to 4 μs. As a result, the FEL could not reach power saturation because the number of amplification times was limited. Recently, the linac has been extensively remodeled to realize high operational stability and reproducibility for advanced studies in beam science and technology. Almost all the peripheral components are replaced with new ones. At this opportunity, ...

  10. The Shanghai FEL User Facility

    Institute of Scientific and Technical Information of China (English)

    ZhaoXiao-Feng; LuoYing-Xiong; 等

    1998-01-01

    The shanghai FEL User Facility(SFEL) for interdisciplinary studies is based on a rf linear accelerator.the prime goal of SEFL is provide a brodly tunable laser beam from near=IR to far-IR with tens of MW at peak power,A linear accelerator will operate in three modes:-3 MeV moed,20-30MeV mode and 40-50MeV mode.In 20-30 MeV mode,the accelerator consists of a ns grid gun driven at 476MHzm,a 476MHz subharmonic buncher,a 2856 MHz T-W type of buncher with high field gradients,and a SLAC type linac.

  11. Accelerating Rf System Of Microtron-recuperator For Fel

    CERN Document Server

    Arbuzov, V S; Gorniker, E I; Kendjebulatov, E K; Kolobanov, E I; Kondakov, A A; Krutikhin, S A; Kuptsov, I V; Kurkin, G Ya; Medvedev, L E; Motygin, S V; Osipov, V N; Petrov, V M; Pilan, Andrey M; Popov, A M; Sedlyarov, I K; Tribendis, A G

    2004-01-01

    FEL (Free Electron Laser) for the Siberian Centre of Photochemical Research is constructed in Novosibirsk. Parameters and last results received on a RF system of the race-track microtron-recuperator for FEL are given in the report. The frequency of the RF system is 180.4 MHz. The RF system operates in continuous mode. The 16 cavities are used in accelerating system of the microtron-recuperator. The RF system is consists of two channels. Each of two 600kW generators drives 8 cavities. Each channel was tested at 7500 kV on the gaps of 8 cavities. The RF power was 630 kW per channel. Now, the accelerating RF system operates at 13600 kV on 16 cavities. Total power of generators is 1100kW.

  12. Ecoregional research for development

    NARCIS (Netherlands)

    Bouma, J.; Stoorvogel, J.J.; Quiroz, R.; Staal, S.; Herrero, M.; Immerzeel, W.; Roetter, R.P.; Bosch, van den H.; Sterk, G.; Rabbinge, R.; Chater, S.

    2007-01-01

    This chapter focuses on the subject of ecoregional research for development. The character of international agricultural research has changed profoundly in the last decades of the twentieth century. This can be illustrated by developments within the Consultative Group on International Agricultural

  13. Locking Lasers to RF in an Ultra Fast FEL

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, R.; Huang, G.; Doolittle, L.; White, W.; Frisch, J.; Coffee, R.

    2010-01-02

    Using a novel, phase-stabilized RF-over-fiber scheme, they transmit 3GHz over 300m with 27fs RMS error in 250kHz bandwidth over 12 hours, and phase lock a laser to enable ultrafast pump-probe experiments. Free-electron lasers (FELs) are capable of producing short-duration (< 10fs), high-energy X-ray pulses for a range of scientific applications. The recently activated Linac Coherent Light Source (LCLS) FEL facility at SLAC will support experiments which require synchronized light pulses for pump-probe schemes. They developed and operated a fiber optic RF transmission system to synchronize lasers to the emitted X-ray pulses, which was used to enable the first pump-probe experiments at the LCLS.

  14. Seeded quantum FEL at 478 keV

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, Marc [Max-Planck-Institut fuer Quantenoptik, Garching (Germany); Thirolf, Peter; Seggebrock, Thorben [Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany); Habs, Dietrich [Max-Planck-Institut fuer Quantenoptik, Garching (Germany); Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany)

    2012-07-01

    We present for the first time a concept for a seeded {gamma} quantum Free Electron Laser (QFEL) at 478 keV (transition in {sup 7}Li). To produce a highly intense and coherent {gamma} beam, we intend to use a seeded FEL scheme. Important for the production of a highly brilliant and coherent {gamma} beam are novel refractive {gamma} lenses for focusing and an efficient monochromator, allowing to generate a very intense and coherent seed beam. To realize such a coherent {gamma} beam at 478 keV (1/38 A), it is suitable to use a quantum FEL design based on a new ''asymmetric'' laser-electron Compton back scattering scheme as pursued for the MeGaRay and ELI-NP facilities. Here the pulse length of the laser is much longer than the electron bunch length, equivalent to a {gamma}-FEL with laser wiggler. The coherence of a seeded QFEL can open up totally new areas of fundamental physics and applications. Especially, 478 keV can be attractive for ''green energy'' and life-science research, such as the detection of Li deposition in the brain for manic-depressive psychosis treatment with high spatial resolution or isotope-specific nuclear waste management and treatment.

  15. A Cherenkov radiator for FEL-synchronized VUV-pulses at a linac-based FEL

    NARCIS (Netherlands)

    Goloviznin, V. V.; Oepts, D.; van der Wiel, M. J.

    1997-01-01

    A possible way to carry out two-color IR+VUV pump-probe experiments at linac-based FELs is proposed. The idea is to supply an FEL facility with a gas cell filled with helium or hydrogen, so that the electron beam, upon passage through the undulator, could be used to generate ultraviolet Cherenkov

  16. FEL options for power beaming

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.J.; Zholents, A.A.; Zolotorev, M.S. [Lawrence Berkeley National Lab., CA (United States); Vinokurov, N.A. [Budker Inst. of Nuclear Physics, Novosibirsk (Russian Federation)

    1997-10-01

    The demand for the output power of communication satellites has been increasing exponentially. The satellite power is generated from solar panels which collect the sunlight and convert it to electrical power. The power per satellite is limited due to the limit in the practical size of the solar panel. One way to meet the power demand is to employ multiple satellites (up to 10) per the internationally agreed-upon ``slot`` in the geosynchronous earth orbit (GEO). However, this approach is very expensive due to the high cost of sending a satellite into a GEO orbit. An alternative approach is power beaming, i.e., to illuminate the solar panels with high power, highly-directed laser beams from earth. The power beaming generates more power per satellite for the same area of the solar panel. The minimum optical beam power, interesting for power beaming application, is P{sub L} = 200kW. The wavelength is chosen to be {lambda} = 0.84 {micro}m, so that it is within one of the transmission windows of the air, and at the same time near the peak of the photo-voltaic conversion efficiency of Si, which is the commonly used material for the solar panels. Free electron lasers (FELs) are well suited for the power beaming application because they can provide high power with coherent wavefront, but without high energy density in media. In this article the authors discuss some principal issues, such as the choice of accelerator and electron gun, the choice of beam parameters, radiation hazards, technological availability, and overall efficiency and reliability of the installation. They also attempt to highlight the compromise between the cost of the primary installation, the operation cost, and the choice of technology, and its maturity. They then present several schemes for the accelerator-FEL systems based on RF accelerators. The initial electron beam accelerator up to the energy of a few MeV is more or less common for all these schemes.

  17. Summary of the working group on FEL theory

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references.

  18. LIDAR Research & Development Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The LIDAR Research and Development labs are used to investigate and improve LIDAR components such as laser sources, optical signal detectors and optical filters. The...

  19. Photoinjector RF cavity design for high power CW FEL

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Schrage, D. L. (Dale L.); Wood R. L. (Richard L.); Young, L. M. (Lloyd M.); Schultheiss, T. (Thomas); Christina, V.; Rathke, J. (John)

    2002-01-01

    The project is under way to develop a key enabling technology for high-power CW FEL: an RF photoinjector capable of producing continuous average current greater than 100 mA. The specific aim is a 700 MHz pi-mode, normal-conducting RF photoinjector, 3 nC of bunch charge, 100 mA of current (at 33.3-MHz bunch repetition rate) and emittance less than 10 mm-mrad. This level of performance will enable robust 100-kW-class FEL operation with electron beam energy 400 MeV, thereby reducing the size and cost of the FEL. This design is scalable to the MW power level by increasing the electron bunch repetition rate from 33.3 MHz to a higher value. The major challenges are emittance control and high heat flux within the CW 700-MHz RF cavities. Results of RF cavity design and cooling schemes are presented, including both high-velocity water and liquid nitrogen cooling options.

  20. Space biology research development

    Science.gov (United States)

    Bonting, Sjoerd L.

    1993-01-01

    The purpose of the Search for Extraterrestrial Intelligence (SETI) Institute is to conduct and promote research related activities regarding the search for extraterrestrial life, particularly intelligent life. Such research encompasses the broad discipline of 'Life in the Universe', including all scientific and technological aspects of astronomy and the planetary sciences, chemical evolution, the origin of life, biological evolution, and cultural evolution. The primary purpose was to provide funding for the Principal Investigator to collaborate with the personnel of the SETI Institute and the NASA-Ames Research center in order to plan and develop space biology research on and in connection with Space Station Freedom; to promote cooperation with the international partners in the space station; to conduct a study on the use of biosensors in space biology research and life support system operation; and to promote space biology research through the initiation of an annual publication 'Advances in Space Biology and Medicine'.

  1. 2008 Research Portfolio: Research & Development Division

    Science.gov (United States)

    Educational Testing Service, 2008

    2008-01-01

    This document describes the breadth of the research being conducted in 2008 by the Research and Development Division at Educational Testing Service (ETS). The research described falls into three large categories: (1) Research supported by the ETS research allocation; (2) Research funded by testing programs at ETS; and (3) Research funded by…

  2. Optical tailoring of xFEL beams

    Energy Technology Data Exchange (ETDEWEB)

    West, Gavin [SLAC National Accelerator Lab., Menlo Park, CA (United States); Coffee, R. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-08-20

    There is an inherent exibility unique to free electron lasers (FELs) that lends well to experimental approaches normally too difficult for other light sources to accomplish. This includes the ability to optically shape the electron bunch prior to final its acceleration for the final FEL process. Optical pulse shaping of the electron bunch can enable both femtosecond and attosecond level FEL pulse control. Pulse shaping is currently implemented, not optically but mechanically, in LCLS-I with an adjustable foil slit that physically spoils the momentum phase of the electron bunch. This selectively suppresses the downstream FEL process ofspoiled electrons. Such a mechanical spoiling method fails for both the soft x-ray regime as well as the high repetition rates that are planned in LCLS-II. Our proposed optical spoiling method circumvents this limitation by making use of the existing ultrafast laser beam that is typically used for adjusting the energy spread for the initial electron bunch. Using Fourier domain shaping we can nearly arbitrarily shape the laser pulses to affect the electron bunch. This can selectively spoil electrons within each bunch. Here we demonstrate the viability of this approach with a programmable acousto-optic dispersive filter. This method is not only well suited for LCLS-II but also has several advantages over mechanical spoiling, including lack of radiation concerns, experiment specific FEL pulse shapes, and real-time adjustment for applications that require high duty-cycle variation such as lock-in amplification of small signals.

  3. Properties of the Third Harmonic of the SASE FEL Radiation

    CERN Document Server

    Saldin, E L; Schneidmiller, E

    2005-01-01

    Recent theoretical and experimental studies have shown that SASE FEL with a planar undulator holds a potential for generation of relatively strong coherent radiation at the third harmonic of the fundamental frequency. Here we present detailed study of the nonlinear harmonic generation in SASE FEL obtained with time-dependent FEL simulation code FAST. Using similarity techniques we present universal dependencies for temporal, spectral, and statistical properties of the third harmonic radiation from SASE FEL.

  4. Investigation of a 2-Colour Undulator FEL Using Puffin

    CERN Document Server

    Campbell, L T; Reiche, S

    2013-01-01

    Initial studies of a 2-colour FEL amplifier using one monoenergetic electron beam are presented. The interaction is modelled using the unaveraged, broadband FEL code Puffin. A series of undulator modules are tuned to generate two resonant frequencies along the FEL interaction and a self-consistent 2-colour FEL interaction at widely spaced non-harmonic wavelengths at 1nm and 2.4nm is demonstrated.

  5. In-pixel conversion with a 10 bit SAR ADC for next generation X-ray FELs

    Energy Technology Data Exchange (ETDEWEB)

    Lodola, L., E-mail: luca.lodola01@universitadipavia.it [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Batignani, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Benkechkache, M.A. [TIFPA INFN, I-38123 Trento (Italy); University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017 Constantine (Algeria); Bettarini, S.; Casarosa, G. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Comotti, D. [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Dalla Betta, G.F. [Università di Trento, Dipartimento di Ingegneria Industriale, I-38123 Trento (Italy); TIFPA INFN, I-38123 Trento (Italy); Fabris, L. [INFN Sezione di Pavia, I-27100 Pavia (Italy); Università di Bergamo, Dipartimento di Ingegneria e Scienze Applicate, I-24044 Dalmine (Italy); Forti, F. [Università di Pisa, Dipartimento di Fisica, I-56127 Pisa (Italy); INFN, Sezione di Pisa, I-56127 Pisa (Italy); Grassi, M. [Università degli Studi di Pavia, Dipartimento di Ingegneria Industriale e dell' Informazione, I-27100 Pavia (Italy); INFN Sezione di Pavia, I-27100 Pavia (Italy); Latreche, S. [University Constantine 1, Department of Electronics in the Science and Technology Faculty, I-25017 Constantine (Algeria); and others

    2016-07-11

    This work presents the design of an interleaved Successive Approximation Register (SAR) ADC, part of the readout channel for the PixFEL detector. The PixFEL project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging for applications at the next generation Free Electron Laser (FEL) facilities. For this purpose, the collaboration is developing the fundamental microelectronic building blocks for the readout channel. This work focuses on the design of the ADC carried out in a 65 nm CMOS technology. To obtain a good tradeoff between power consumption, conversion speed and area occupation, an interleaved SAR ADC architecture was adopted.

  6. In-pixel conversion with a 10 bit SAR ADC for next generation X-ray FELs

    Science.gov (United States)

    Lodola, L.; Batignani, G.; Benkechkache, M. A.; Bettarini, S.; Casarosa, G.; Comotti, D.; Dalla Betta, G. F.; Fabris, L.; Forti, F.; Grassi, M.; Latreche, S.; Malcovati, P.; Manghisoni, M.; Mendicino, R.; Morsani, F.; Paladino, A.; Pancheri, L.; Paoloni, E.; Ratti, L.; Re, V.; Rizzo, G.; Traversi, G.; Vacchi, C.; Verzellesi, G.; Xu, H.

    2016-07-01

    This work presents the design of an interleaved Successive Approximation Register (SAR) ADC, part of the readout channel for the PixFEL detector. The PixFEL project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging for applications at the next generation Free Electron Laser (FEL) facilities. For this purpose, the collaboration is developing the fundamental microelectronic building blocks for the readout channel. This work focuses on the design of the ADC carried out in a 65 nm CMOS technology. To obtain a good tradeoff between power consumption, conversion speed and area occupation, an interleaved SAR ADC architecture was adopted.

  7. Design study on the merger for BXERL-FEL

    Institute of Scientific and Technical Information of China (English)

    ZHU Xiong-Wei; WANG Shu-Hong; CHEN Sen-Yu

    2009-01-01

    In North China, there is a preliminary proposal for ERL-FEL light source (BXERL-FEL) with its aim at "one machine, two purposes" (the XFEL and ERL work simultaneously). One of the key technologies is the merger section. In this paper, we give the physical design of the merger section for BXERL-FEL which merges three kinds of electron beam.

  8. Multi-mode competition in an FEL oscillator at perfect synchronism of an optical cavity

    CERN Document Server

    Dong, Z W; Kii, T; Yamazaki, T; Yoshikawa, K

    2002-01-01

    The sustained saturation in a short pulse free electron laser (FEL) oscillator at perfect synchronism of an optical cavity has been observed recently by Japan Atomic Energy Research Institute (JAERI) FEL group by using their super-conducting linac (Phys. Rev. Lett., in preparation). The experiments have clearly shown that FEL efficiency becomes maximum at perfect synchronism, although it has been considered that only a transient state exists at perfect synchronism due to the lethargy effect. Through careful analyses of the experimental condition of JAERI FEL, we found that, in spite of the short length of the electron micro-bunch, the saturation appears due to the following features, which were different from other FEL experiments: (1) very large ratio of the small signal gain to losses, (2) very long electron macro-bunch which can tolerate a slow start up. The saturation and high efficiency at perfect synchronism were benefited from the contribution of the weak sideband instability. In order to analyse these...

  9. FEL system for gamma-gamma collider at TESLA

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2001-01-01

    The present paper contains the results of optimization of the free electron laser for the gamma-gamma collider at TESLA. A superconducting linear accelerator, similar to the TTF (TESLA Test Facility) accelerator, produces a driving electron beam for the FEL. The MOPA FEL scheme is studied when the radiation from a master oscillator is amplified in the FEL amplifier with tapered undulator. The FEL produces a radiation of TW level with a wavelength of 1 mu m. Optimization of the FEL amplifier is performed with a three-dimensional, time-dependent simulation code FAST.

  10. Hydropower research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report is a compilation of information on hydropower research and development (R and D) activities of the Federal government and hydropower industry. The report includes descriptions of on-going and planned R and D activities, 1996 funding, and anticipated future funding. Summary information on R and D projects and funding is classified into eight categories: fish passage, behavior, and response; turbine-related; monitoring tool development; hydrology; water quality; dam safety; operations and maintenance; and water resources management. Several issues in hydropower R and D are briefly discussed: duplication; priorities; coordination; technical/peer review; and technology transfer/commercialization. Project information sheets from contributors are included as an appendix.

  11. Hydropower research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report is a compilation of information on hydropower research and development (R and D) activities of the Federal government and hydropower industry. The report includes descriptions of on-going and planned R and D activities, 1996 funding, and anticipated future funding. Summary information on R and D projects and funding is classified into eight categories: fish passage, behavior, and response; turbine-related; monitoring tool development; hydrology; water quality; dam safety; operations and maintenance; and water resources management. Several issues in hydropower R and D are briefly discussed: duplication; priorities; coordination; technical/peer review; and technology transfer/commercialization. Project information sheets from contributors are included as an appendix.

  12. Development of Solar Research

    Science.gov (United States)

    Wittmann, Axel D.; Wolfschmidt, Gudrun; Duerbeck, Hilmar W.

    Originally based on a workshop on “Development of Solar Research”, held in Freiburg/Breisgau, this book contains articles on megalithic structures, the Nebra sky-disk, ancient sun cults, the observation of sunspots, the photography of the sun during eclipses, eclipse maps and expeditions, solar telescopes, solar physics during the Nazi era, archives of solar observations, scientific ballooning for solar research, site-testing on the Canary Islands, as well as on international cooperation.

  13. EXPERIENCE AND PLANS OF THE JLAB FEL FACILITY AS A USER FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Michelle D. Shinn

    2007-08-26

    Jefferson Lab's IR Upgrade FEL building was planned from the beginning to be a user facility, and includes an associated 600 m2 area containing seven laboratories. The high average power capability (multikilowatt-level) in the near-infrared (1-3 microns), and many hundreds of watts at longer wavelengths, along with an ultrafast (~ 1 ps) high PRF (10's MHz) temporal structure makes this laser a unique source for both applied and basic research. In addition to the FEL, we have a dedicated laboratory capable of delivering high power (many tens of watts) of broadband THz light. After commissioning the IR Upgrade, we once again began delivering beam to users in 2005. In this presentation, I will give an overview of the FEL facility and its current performance, lessons learned over the last two years, and a synopsis of current and future experiments.

  14. X-ray FEL Simulation with the MPP version of the GINGER Code

    Science.gov (United States)

    Fawley, William

    2001-06-01

    GINGER is a polychromatic, 2D (r-z) PIC code originally developed in the 1980's to examine sideband growth in FEL amplifiers. In the last decade, GINGER simulations have examined various aspects of x-ray and XUV FEL's based upon initiation by self-amplified spontaneous emission (SASE). Recently, GINGER's source code has been substantially updated to exploit many modern features of the Fortran90 language and extended to exploit multiprocessor hardware with the result that the code now runs effectively on platforms ranging from single processor workstations in serial mode to MPP hardware at NERSC such as the Cray-T3E and IBM-SP in full parallel mode. This poster discusses some of the numerical algorithms and structural details of GINGER which permitted relatively painless porting to parallel architectures. Examples of some recent SASE FEL modeling with GINGER will be given including both existing experiments such as the LEUTL UV FEL at Argonne and proposed projects such as the LCLS x-ray FEL at SLAC.

  15. Photonics Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, Elizabeth [UNLV Research Foundation, Las Vegas, NV (United States)

    2010-01-15

    During the period August 2005 through October 2009, the UNLV Research Foundation (UNLVRF), a non-profit affiliate of the University of Nevada, Las Vegas (UNLV), in collaboration with UNLV's Colleges of Science and Engineering; Boston University (BU); Oak Ridge National Laboratory (ORNL); and Sunlight Direct, LLC, has managed and conducted a diverse and comprehensive research and development program focused on light-emitting diode (LED) technologies that provide significantly improved characteristics for lighting and display applications. This final technical report provides detailed information on the nature of the tasks, the results of the research, and the deliverables. It is estimated that about five percent of the energy used in the nation is for lighting homes, buildings and streets, accounting for some 25 percent of the average home's electric bill. However, the figure is significantly higher for the commercial sector. About 60 percent of the electricity for businesses is for lighting. Thus replacement of current lighting with solid-state lighting technology has the potential to significantly reduce this nation's energy consumption by some estimates, possibly as high as 20%. The primary objective of this multi-year R&D project has been to develop and advance lighting technologies to improve national energy conversion efficiencies; reduce heat load; and significantly lower the cost of conventional lighting technologies. The UNLVRF and its partners have specifically focused these talents on (1) improving LED technologies; (2) optimizing hybrid solar lighting, a technology which potentially offers the benefits of blending natural with artificial lighting systems, thus improving energy efficiency; and (3) building a comprehensive academic infrastructure within UNLV which concentrates on photonics R&D. Task researchers have reported impressive progress in (1) the development of quantum dot laser emitting diodes (QDLEDs) which will ultimately improve

  16. A compact FEL upconverter of coherent radiation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.; Marshall, T.C. [Columbia Univ., New York, NY (United States)

    1995-12-31

    The objective is to generate a powerful millimeter-wave FEL signal in a single pass, using a coherent microwave source (24GHz) to prebunch the electron beam for a harmonically-related wave (72GHz). We use the Columbia FEL facility, operating the electron beam at 600kV, 100A; undulator period = 1.85cm and 250G (K = 0.25); electron beam diameter = 3mm inside a 8.5 mm ID drift tube; guiding field of 8800G. Under these conditions, both the microwave signal (5kW input) and the millimeter signal will show travelling-wave gain in the TE11 mode. We report initial experimental results for the millimeter wave spectrum and find an overall power gain of {approximately}20 for the 24GHz input wave. Also presented will be numerical solutions of the wave growth using the FEL equations with slippage. This device has the advantage of producing a high-power FEL output in a single-pass travelling-wave configuration, obtaining a millimeter wave which is phase-referenced to a coherent laboratory source.

  17. Ecotribology research developments

    CERN Document Server

    2016-01-01

    This book presents resent research advances in the area of eco-triobology. In the last years, eco-tribology or environmentally friendly tribology has gained increasing importance in sustainable engineering. Environmentally acceptable tribological practices save resources by optimizing product usage and reducing energy. This book covers current developments in all areas covered by the term eco-tribology, including biomimetics surfaces, control of friction and wear, environmental aspects of lubrication and surface modification techniques as well as tribological aspects of green applications, such wind-power turbines or solar panels.

  18. Limitations of the transverse coherence in the self-amplified spontaneous emission FEL

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2001-01-01

    In this paper we analyze the process of the formation of transverse coherence of radiation from a self-amplified spontaneous emission (SASE) FEL. It is shown that in the high-gain linear regime the degree of transverse coherence approaches unity asymptotically as z sup - sup 1 , but not exponentially, as one would expect from a simple physical assumption that the transverse coherence is established due to the transverse mode selection. It has been found that even after finishing the transverse mode selection process the degree of transverse coherence of the radiation from SASE FEL visibly differs from unity. This is a consequence of the interdependence of the longitudinal and transverse coherence. The SASE FEL has poor longitudinal coherence which develops slowly with the undulator length thus preventing a full transverse coherence.

  19. SOFT X-RAY FEL BY CASCADING STAGES OF HIGH GAIN HARMONIC GENERATION.

    Energy Technology Data Exchange (ETDEWEB)

    YU,L.H.

    2003-04-17

    Short wavelength Free-Electron Lasers are perceived as the next generation of synchrotron light sources. In the past decade, significant advances have been made in the theory and technology of high brightness electron beams and single pass FELs. These developments facilitate the construction of practical VUV FELs and make x-ray FELs possible. Self-Amplified Spontaneous Emission (SASE) and High Gain Harmonic Generation (HGHG)[17-19] are the two leading candidates for x-ray FELs. The first lasing of HGHG proof-of-principle experiment succeeded in August, 1999 in Brookhaven National Laboratory. The experimental results agree with the theory prediction. Compared with SASE FEL, the following advantages of HGHG FEL were confirmed; (1) Better longitudinal coherence, and hence, much narrower bandwidth than SASE. (2) More stable central wavelength, (3) More stable output energy. In this introduction, we will first briefly describe the principle of HGHG in Section A. Then in Section B, we give a general description about how to produce soft x-ray by cascading HGHG scheme. In section 2, we give a detailed description of the system design. Then, in section 3, we give a description of an analytical estimate for the HGHG process, and the calculation of the parameters of different parts of the system. The estimate is found to agree with simulation within about a factor 2 for most cases we studied. The stability issue, the sensitivity to parameter variation, the harmonic contents of the final output, and the noise degradation issue of such HGHG scheme are discussed in Section 4. The results are presented in Section 4. Finally, in Section 5, we will give some discussion of the challenges in development of the system. The conclusion is given in Section 6.

  20. Virtual Reality Research at TNO-FEL

    NARCIS (Netherlands)

    Jense, G.J.; Kuijper, F.

    1992-01-01

    Virtual environmens(VE) technology is expected to make a big impact on future training and simulation systems. Direct stimulation of human senses (eyesight, auditory, tactile) and new paradigms for user input will improve the realism of simulations and thereby the effectiveness of training and

  1. Virtual Reality Research at TNO-FEL

    NARCIS (Netherlands)

    Jense, G.J.; Kuijper, F.

    1992-01-01

    Virtual environmens(VE) technology is expected to make a big impact on future training and simulation systems. Direct stimulation of human senses (eyesight, auditory, tactile) and new paradigms for user input will improve the realism of simulations and thereby the effectiveness of training and simul

  2. Characteristics of the Duke/OK-4 storage ring FEL and gamma-ray source

    Science.gov (United States)

    Park, Seong Hee

    The Duke/OK-4 storage ring is a dedicated device for driving a short wavelength Free Electron Laser (FEL). In addition, Compton scattering of the laser light from the circulating electron beam products a semi-monochromatic γ-ray source. The dynamics of such a system including accelerator physics, FEL physics, and Compton backscattering is complex and requires special study, This dissertation is a detailed theoretical and experimental analysis of such a system. The main emphasis of the theory presented here is the self-consistent analysis of the system which incorporates three drastically different processes-the dynamics of an intense electron beam, the free electron laser, and the Compton backscattering. The interdependence of these three processes and the physics of this complex system is discussed in this work. The OK-4/Duke storage ring FEL is the only accelerator facility capable of routine lasing in the deep-UV range and able to generate intense γ-ray beams with energy tunable from 2 MeV to 55 MeV, with energy resolution between 0.5%-1% and with flux up to -5 × 107. The flexibility of this γ-ray source is due to the record-breaking performance of the OK-4/Duke storage ring FEL (lasing from 193.7 nm to 730 nm). Experimental studies determining the parameters of the electron beams, OK-4 FEL beams, and γ-ray beams compare favorably with the theoretical predictions. This study confirms that the electron energy spread induced by FEL lasing is currently the main factor limiting energy resolution. These results provide a solid foundation for future development of the system to obtain more reliable predictions of its performance. A number of useful ``scaling laws'' are also presented here. The results of this work have provided the basis for a number of applications of the OK-4 FEL beam and γ- ray beam that are underway or in the advance planning stage. Future plans include the development and design of a system capable of generating γ-ray beams with an energy

  3. Eltron Research & Development

    Energy Technology Data Exchange (ETDEWEB)

    Evenson, Carl; Mackay, Richard; Faull, John

    2014-03-01

    This topical report covers technical work conducted under contract DE-FC26-05NT42469 between FY06 Q1 through FY14 Q2. The project evolved through several budget periods, budget revisions and continuation applications. This report covers work performed under the “base” program. In 2010 ARRA funding was added to the project. A separate report covering the ARRA portion of the project was submitted to DOE. The original project was focused on research and development for scale-up of hydrogen separation membrane for a FutureGen type power plant. The work included membrane testing and evaluation of metal alloy flat plates vs. tubes and metal membranes vs. cermet membranes. In addition, economic analysis and process modeling was performed. The original project team included CoorsTek, NORAM, and Praxair. In FY10Q2 a continuation application was filed for conducting a scale-up test at Eastman Chemical. In this part of the project a Subscale Engineering Prototype (SEP) membrane skid was designed, fabricated, and operated on a gasified coal slip-stream on Eastman’s site in Kingsport, TN. Following operation, the project was reorganized and a second continuation application with a new statement of work was initiated in FY12Q1. Finally, based on DOE’s decision not to proceed with a Process Development Unit (PDU) field test, a third continuation application and statement of work was initiated in FY13Q1 to close out the project.

  4. Growth of transverse coherence in SASE FELs

    CERN Document Server

    Kumar, V

    2000-01-01

    We introduce the correlation function between the electric field at two different points in the transverse plane as a parameter to quantify the degree of transverse coherence. We also propose a more realistic model for the initialization of the radiation in computer codes used to study SASE FELs. We make these modifications in the code TDA and use it to study the growth of transverse coherence as a function of electron beam size, beam current and transverse emittance. Our results show explicitly that the onset of full transverse coherence in SASE takes place much before the power saturates. With the more realistic model the onset of the exponential growth regime is delayed, and to get a given power from the FEL one needs a longer undulator than would be predicted by the original TDA code.

  5. Design and optimization of the grating monochromator for soft X-ray self-seeding FELs

    Energy Technology Data Exchange (ETDEWEB)

    Serkez, Svitozar

    2015-10-15

    The emergence of Free Electron Lasers (FEL) as a fourth generation of light sources is a breakthrough. FELs operating in the X-ray range (XFEL) allow one to carry out completely new experiments that probably most of the natural sciences would benefit. Self-amplified spontaneous emission (SASE) is the baseline FEL operation mode: the radiation pulse starts as a spontaneous emission from the electron bunch and is being amplified during an FEL process until it reaches saturation. The SASE FEL radiation usually has poor properties in terms of a spectral bandwidth or, on the other side, longitudinal coherence. Self-seeding is a promising approach to narrow the SASE bandwidth of XFELs significantly in order to produce nearly transformlimited pulses. It is achieved by the radiation pulse monochromatization in the middle of an FEL amplification process. Following the successful demonstration of the self-seeding setup in the hard X-ray range at the LCLS, there is a need for a self-seeding extension into the soft X-ray range. Here a numerical method to simulate the soft X-ray self seeding (SXRSS) monochromator performance is presented. It allows one to perform start-to-end self-seeded FEL simulations along with (in our case) GENESIS simulation code. Based on this method, the performance of the LCLS self-seeded operation was simulated showing a good agreement with an experiment. Also the SXRSS monochromator design developed in SLAC was adapted for the SASE3 type undulator beamline at the European XFEL. The optical system was studied using Gaussian beam optics, wave optics propagation method and ray tracing to evaluate the performance of the monochromator itself. Wave optics analysis takes into account the actual beam wavefront of the radiation from the coherent FEL source, third order aberrations and height errors from each optical element. The monochromator design is based on a toroidal VLS grating working at a fixed incidence angle mounting without both entrance and exit

  6. The BESSY Soft X-Ray FEL User Facility

    CERN Document Server

    Kraemer, Dieter

    2005-01-01

    The user requests for an optimized 2nd generation FEL facility in the VUV to soft X-ray range demand for ultra short photon pulses (t = 20 fs) at a peak power of several GW. A high shot to shot reproducibility of the pulse shape and pulse power allowing for fs-synchronization for pump-probe experiments is feasible in a seeded FEL approach. Free selectable photon polarization and wavelength tuning is essential for any 2nd generation FEL source like the proposed BESSY-Soft X-ray FEL user facility. Freely selectable pulse repetition rates and freely selectable pulse patterns, including fast switching to different parallel operating FEL-Lines are necessary ingredients, feasible with a suitable injector in combination with a CW-superconducting linac. The status of the BESSY HGHG-FEL project will be reviewed.

  7. Duke storage rink UV/VUV FEL: Status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko, V.N.; Burnham, B.; Madey, J.M.J. [Duke Univ., Durham, NC (United States)] [and others

    1995-12-31

    The 1 GeV Duke storage ring was successfully commissioned with parameters exceeding initial specification. The OK-4 FEL has arrived at the Duke FEL laboratory from the Novosibirsk Institute of Nuclear Physics. The OK-4 installation and commissioning is in progress. In this paper we describe the up-to-date status of the Duke storage ring and the OK-4 FEL. The projected performance of the OK-4 UV/VUV FEL is presented based on the electron beam parameters achieved. Initial plans to operate the OK-4 UV/VUV FEL at the Duke 1 GeV storage ring are outlined. Future plans and prospects of both the OK-4 FEL and the Duke storage ring are discussed.

  8. Performance of the OK-4/Duke storage ring FEL

    CERN Document Server

    Litvinenko, V N; Pinayev, I V; Wu, Y

    2001-01-01

    In this paper, we report measured parameters of the OK-4 FEL driven by the Duke storage ring. The OK-4 FEL was being operated continuously for 2 yr in the broad wavelength range for user applications utilising spontaneous and coherent XUV and UV radiation as well as Compton back-scattered gamma-rays in the range of 2-58 MeV. During this time, the OK-4 FEL lased in the range from 193.7 to about 730 nm using five sets of mirrors and electron beam energies from 240 to 800 MeV. Our predictions for the OK-4 FEL are compared with measured performance, both in the CW and in the giant pulse mode. We discuss our future plans for the OK-4 FEL operation as well as the construction and commissioning of the OK-5 FEL with helical wigglers.

  9. Study on wavelength shortening and upgrading of the free electron laser (FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Tetsuo; Yamada, Kawakatsu; Sei, Norihiro; Ohgaki, Hideaki; Sugiyama, Suguru; Mikado, Tomohisa [Electrotechnical Lab., Tsukuba, Ibaraki (Japan)

    1997-02-01

    This study is a task of ``Comprehensive study`` in ``nuclear energy basic technology research``, which is promoted under cooperation of four research institutes. The Electrotechnical Laboratory conducted, in 1991 in the first period of colaboration, on successful oscillation at visible region (598 nm) as the first case in Japan, construction of small type accumulation ring NIJI-IV for FEL, successful oscillation of visible range from 595 to 488 nm by installing optical krystron with maximum frequency in the world, and successful emittance lowering of accumulation beam by wide improvement of the ring. In the optical resonator, studies on minute loss measuring technique and on recovery from mirror deterioration were promoted. In the second period started from fiscal year of 1994, studies on FEL oscillation technique in short wavelength and upgrading of FEL corresponding to a frontier area were started, to succeed an oscillation experiment at 350 nm in ultraviolet area on April, 1994. Then, studies on generation of high luminescence x-ray owing to laser Compton scattering using FEL as a future plan, on design of a new accumulation ring and on the others as well as studies on further quality improvement of electron beam and on optical resonator have been promoted. (G.K.)

  10. Harmonic lasing in X-ray FELs

    CERN Document Server

    Schneidmiller, E A

    2012-01-01

    Harmonic lasing in a free electron laser with a planar undulator (under the condition that the fundamental frequency is suppressed) might be a cheap and efficient way of extension of wavelength ranges of existing and planned X-ray FEL facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide much more intense, stable, and narrow-band FEL beam which is easier to handle due to the suppressed fundamental frequency. In this paper we perform a parametrization of the solution of the eigenvalue equation for lasing at odd harmonics, and present an explicit expression for FEL gain length, taking into account all essential effects. We propose and discuss methods for suppression of the fundamental harmonic. We also suggest a combined use of harmonic lasing and lasing at the retuned fundamental wavelength in order to reduce bandwidth and to increase brilliance of X-ray beam at saturation. Considering 3rd harmonic lasing as a practical example, we come to the conclusion that it is much more robust...

  11. Characterization of X-Ray FEL Radiation

    CERN Document Server

    Bionta, R M

    2005-01-01

    The Linac Coherent Light Source (LCLS) will generate X-FEL radiation with photon energies tunable from 826 eV to 8261 eV. It is expected that elements of the Linac and Undulator systems will require careful tuning in order to achieve lasing at these wavelengths. The tuning will be guided by measurements of both the electron and photon beam characteristics. The primary characteristics of the photon beam that can be measured are the total pulse energy, its spatial shape, and spectra. During the initial commissioning phase, these measurements will be performed on the spontaneous radiation emitted by one or more undulators as they are added to the LCLS. The next phase of commissioning requires detecting and measuring faint (unsaturated) FEL radiation for the purposes of tuning the Linac and undulator to achieve saturation. During the last phases of commissioning these measurements will have to be performed on the saturated FEL beam. The photon measurements are complicated by the large dynamic range required, the ...

  12. Harmonic cascade FEL designs for LUX

    Energy Technology Data Exchange (ETDEWEB)

    Penn, G.; Reinsch, M.; Wurtele, J.; Corlett, J.N.; Fawley, W.M.; Zholents, A.; Wan, W.

    2004-07-16

    LUX is a design concept for an ultrafast X-ray science facility, based on an electron beam accelerated to GeV energies in are circulating linac. Included in the design are short duration (200 fs or shorter FWHM) light sources using multiple stages of higher harmonic generation, seeded by a 200-250 nm laser of similar duration. This laser modulates the energy of a group of electrons within the electron bunch; this section of the electron bunch then produces radiation at a higher harmonic after entering a second, differently tuned undulator. Repeated stages in a cascade yield increasing photon energies up to 1 keV. Most of the undulators in the cascade operate in the low-gain FEL regime. Harmonic cascades have been designed for each pass of the recirculating linac up to a final electron beam energy of 3.1 GeV. For a given cascade, the photon energy can be selected over a wide range by varying the seed laser frequency and the field strength in the undulators. We present simulation results using the codes GENESIS and GINGER, as well as the results of analytical models which predict FEL performance. We discuss lattice considerations pertinent for harmonic cascade FELs, as well as sensitivity studies and requirements on the electron beam.

  13. A proposed visible FEL Facility at Boeing

    Energy Technology Data Exchange (ETDEWEB)

    Dowell, D.H.; Adamski, J.L.; Hayward, T.D. [Boeing Defense & Space Group, Seattle, WA (United States)] [and others

    1995-12-31

    A 1-kW average power, visible wavelength FEL is described, based on a 120-MeV, 0.1. A macropulse average current linac operating at a duty factor of 0. 6% and having average beam power of 70 kW. The accelerator will employ a demonstrated photoinjector, 18-MeV, 433-MHz linac as an injector, followed by a 1300-MHz longitudinal phase space {open_quotes} linearizer,{close_quotes} a magnetic buncher chicane, and seven 1300-MHz, pulsed traveling wave linac sections. The magnets used to transport the beam from the linac to the FEL centerline, the 5-m THUNDER wiggler, and the optical resonator will be reclaimed from previous FEL demonstration experiments. We expect to attain pulse lengths of 7 ps for 3.5 nC, with minimal distortion of the pulse profile and normalized rms emittance of 7.5 {+-} 2.5 {pi} mm-mr. FELEX projects a laser conversion efficiency of 4.3 %, yielding average output of 3 kW.

  14. Generating polarization controllable FELs at Dalian coherent light source

    CERN Document Server

    Zhang, T; Wang, D; Zhao, Z T; Zhang, W Q; Wu, G R; Dai, D X; Yang, X M

    2013-01-01

    The property of the FEL polarization is of great importance to the user community. FEL pulses with ultra-high intensity and flexible polarization control ability will absolutely open up new scientific realms. In this paper, several polarization control approaches are presented to investigate the great potential on Dalian coherent light source, which is a government-approved novel FEL user facility with the capability of wavelength continuously tunable in the EUV regime of 50-150 nm. The numerical simulations show that both circularly polarized FELs with highly modulating frequency and 100 microjoule level pulse energy could be generated at Dalian coherent light source.

  15. Innovative FEL schemes using variable-gap undulators

    Science.gov (United States)

    Schneidmiller, E. A.; Yurkov, M. V.

    2017-06-01

    We discuss theoretical background and experimental verification of advanced schemes for X-ray FELs using variable gap undulators (harmonic lasing self-seeded FEL, reverse taper etc.) Harmonic lasing in XFELs is an opportunity to extend operating range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide much more intense, stable, and narrow-band FEL beam which is easier to handle due to the suppressed fundamental. Another interesting application of harmonic lasing is Harmonic Lasing Self-Seeded (HLSS) FEL that allows to improve longitudinal coherence and spectral power of a SASE FEL. Recently this concept was successfully tested at the soft X-ray FEL user facility FLASH in the wavelength range between 4.5 nm and 15 nm. That was also the first experimental demonstration of harmonic lasing in a high-gain FEL and at a short wavelength (before it worked only in infrared FEL oscillators). Another innovative scheme that was tested at FLASH2 is the reverse tapering that can be used to produce circularly polarized radiation from a dedicated afterburner with strongly suppressed linearly polarized radiation from the main undulator. This scheme can also be used for an efficient background-free production of harmonics in an afterburner. Experiments on the frequency doubling that allowed to reach the shortest wavelength at FLASH as well as on post-saturation tapering to produce a record intencity in XUV regime are also discussed.

  16. A feasibility study of TAC IR-FEL project

    Energy Technology Data Exchange (ETDEWEB)

    Aksakal, Huesnue, E-mail: aksakal@cern.c [Nigde University, Department of Physics, Faculty of Letter and Science, 51240 Nigde (Turkey); Arikan, Ertan [Nigde University, Department of Physics, Faculty of Letter and Science, 51240 Nigde (Turkey)

    2010-08-21

    We have performed preliminary simulation of amplifier mode operation of Turkish accelerator complex (TAC) infrared free electron laser (IR-FEL) facility which is designed to operate in oscillator mode. FEL power values of amplifier mode are explored using 3D SIMPLEX 1.3 (X-ray FEL Practical Simulator) simulation code and it is argued that the same or higher amount of power of TAC IR-FEL planing to obtain in the oscillator mode, could be obtained in the amplifier mode, using same undulator and electron beam parameters with a small modification.

  17. Research and development toward a 4.5-1.5{angstrom} linac coherent light source (LCLS) at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Tatchyn, R.; Arthur, J.; Baltay, M. [Stanford Univ., CA (United States)] [and others

    1995-12-31

    In recent years significant studies have been initiated on the theoretical and technical feasibility of utilizing a portion of the 3km S-band accelerator at the Stanford Linear Accelerator Center (SLAC) to drive a short wavelength (4.5-1.5 {Angstrom}) Linac Coherent Light Source (LCLS), a Free-Electron Laser (FEL) operating in the Self-Amplified Spontaneous Emission (SASE) regime. Electron beam requirements for single-pass saturation include: (1) a peak current in the 3-7 kA range, (2) a relative energy spread of <0.05%, ad (3) a transverse emittance, {epsilon}{le}{lambda}/4{pi}, where {lambda}[m] is the output wavelength. Requirements on the insertion device include field error levels of 0.1-0.2% for keeping the electron bunch centered on and in phase with the amplified photons, and a focusing beta of 4-8 m for inhibiting the dilution of its transverse density. Although much progress techniques necessary for LCLS operation down to {approximately}20 {angstrom}, a substantial amount of research and development is still required in a number of theoretical and experimental areas leading to the construction and operation of a 4.5-1.5 {angstrom} LCLS. In this paper we report on a research and development program underway and in planning at SLAC for addressing critical questions in these areas. These include the construction and operation of a linac test stand for developing laser-driven photocathode rf guns with normalized emittances approaching 1 mm-mr; development of advanced beam compression, stability, an emittance control techniques at multi-GeV energies; the construction and operation of a FEL Amplifier Test Experiment (FATE) for theoretical and experimental studies of SASE at IR wavelengths; an undulator development program to investigate superconducting, hybrid/permanent magnet (hybrid/PM), and pulsed-Cu technologies; theoretical and computational studies of high-gain FEL physics and LCLS component designs.

  18. Development Research in/on Educational Development

    OpenAIRE

    Plomp, T

    2000-01-01

    In the practice of education, much design and development activities are taking place: curriculum development, instructional design, multimedia design, textbook development, etc. However, there is not much knowledge about how to design and develop, neither about criteria for the outcomes of design and development activities. Development research is a problem oriented, interdisciplinary research approach aimed at reducing uncertainty of design decisions, generating concrete recommendations for...

  19. Numerical modeling of thermal loading of diamond crystal in X-ray FEL oscillators

    Science.gov (United States)

    Song, Mei-Qi; Zhang, Qing-Min; Guo, Yu-Hang; Li, Kai; Deng, Hai-Xiao

    2016-04-01

    Due to high reflectivity and high resolution of X-ray pulses, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono-chromator in the next generation of free electron lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expansion of the diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillators has been systematically studied by combined simulation with Geant4 and ANSYS, and its dependence on the environmental temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented. Our results show that taking the thermal loading effects into account, X-ray FEL oscillators are still robust and promising with an optimized design. Supported by National Natural Science Foundation of China (11175240, 11205234, 11322550) and Program for Changjiang Scholars and Innovative Research Team in University (IRT1280)

  20. Radionuclide Operational Research & Development

    Science.gov (United States)

    2000-09-01

    DoD/DOE Seismic Research Symposium: Planning for Verification of and Compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT) held in New...message sent via a socket connection). Version 1.0 of the RASA Authentication Software has been tested on the two RASA stations at Hanford (USX01...No. 1 (1999) 109-122, (ARSA). Harris, et al. (1999), Proceedings of 21st Seismic Research Symposium: Technologies for Monitoring the

  1. Amplification of current density modulation in a FEL with an infinite electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G.; Litvinenko, V.N.; Webb, S.D.

    2011-03-28

    We show that the paraxial field equation for a free electron laser (FEL) in an infinitely wide electron beam with {kappa}-2 energy distribution can be reduced to a fourth ordinary differential equation (ODE). Its solution for arbitrary initial phase space density modulation has been derived in the wave-vector domain. For initial current modulation with Gaussian profile, close form solutions are obtained in space-time domain. In developing an analytical model for a FEL-based coherent electron cooling system, an infinite electron beam has been assumed for the modulation and correction processes. While the assumption has its limitation, it allows for an analytical close form solution to be obtained, which is essential for investigating the underlying scaling law, benchmarking the simulation codes and understanding the fundamental physics. 1D theory was previously applied to model a CeC FEL amplifier. However, the theory ignores diffraction effects and does not provide the transverse profile of the amplified electron density modulation. On the other hand, 3D theories developed for a finite electron beam usually have solutions expanded over infinite number of modes determined by the specific transverse boundary conditions. Unless the mode with the largest growth rate substantially dominates other modes, both evaluation and extracting scaling laws can be complicated. Furthermore, it is also preferable to have an analytical FEL model with assumptions consistent with the other two sections of a CeC system. Recently, we developed the FEL theory in an infinitely wide electron beam with {kappa}-1 (Lorentzian) energy distribution. Close form solutions have been obtained for the amplified current modulation initiated by an external electric field with various spatial-profiles. In this work, we extend the theory into {kappa}-2 energy distribution and study the evolution of current density induced by an initial density modulation.

  2. 3D simulations on output power fluctuation in a short bunch rf-linac FEL

    Science.gov (United States)

    Sentoku, Y.; Furukawa, H.; Mima, K.; Taguchi, T.; Kuruma, S.; Yasuda, H.; Yamanaka, C.; Nakai, S.

    1995-04-01

    A space-time dependent 3D simulation code has been developed in order to analyze the RF-linac FEL oscillator dynamics. Our simulation code employed both the transverse mode spectral method and the longitudinal finite difference method. The electron beam is modeled by a group of super particles which have a density profile in the time domain. In this model the electron beam is able to determine the energy spread and the finite emittance. This simulation code enables us to describe the transverse mode competition and the slippage effects in the resonator cavity. In this paper, a high power infrared FEL with a short bunch electron beam is investigated. The output power fluctuation with cavity desynchronism is simulated with this code. Especially, we investigated the effects of the transverse mode competition, energy spread, and the finite emittance of the electron beam on the output fluctuation. Using FELIX parameters, the FEL oscillator is simulated for 300 passes. The output power oscillates periodically in the case of single transverse mode and not in the case of multi-transverse modes. In a warm beam with multi-transverse modes, the emission is higher than that with a single mode, and the optical pulse shape is almost the after 100 passes. Furthermore, the phase space motion of the laser field is periodic and stable. As a result of the simulation, we recommend that high power infrared FEL operation should include multi-transverse modes in order to get higher emission and a more stable optical pulse.

  3. Deposition of robust multilayer mirror coatings for storage ring FEL lasing at 176nm

    Science.gov (United States)

    Günster, St.; Ristau, D.; Trovó, M.; Danailov, M.; Gatto, A.; Kaiser, N.; Sarto, F.; Piegari, A.

    2005-09-01

    Progress was achieved in the last years in the development of multilayer mirrors used in storage ring Free Electron Lasers (FEL) operating in the vacuum ultraviolet spectral range. Based on dense oxide coatings deposited by Ion Beam Sputtering, a stable lasing at 190 nm was demonstrated. The extension towards shorter wavelengths had to overcome severe problems connected to the radiation resistance and the necessary reflectivity of the resonator mirrors. In this context, radiation resistance can be considered as the ability of the mirror materials to withstand the high power laser radiation and the intense energetic background radiation generated in the synchrotron source. The bombardment with high energetic photons leads to irreversible changes and a coloration on the specimen. Reflectivity requirements can be evaluated from the tolerable losses of FEL systems. At ELETTRA FEL the resonator mirror reflectivity must be above 95 %. Evaporated fluoride multilayer mirrors provide sufficient reflectivity, but they do not exhibit an adequate radiation resistance. Pure oxide multilayers show a sufficient radiation resistance, but they cannot reach the necessary reflectivity below 190 nm. A successful approach combines evaporated fluoride multilayer stack with a dense protection layer of silicon dioxide deposited by Ion Beam Sputtering. Such mirror systems were produced reaching a reflectivity of approximately 99 % at 180 nm. Lasing in the storage ring FEL at ELETTRA was realised in the range between 176 - 179 nm. The mirror reflectivity shows only a slight degradation after lasing, which could be fully restored after the lasing experiment.

  4. Timing jitter studies of the SwissFEL Test Injector drive laser

    Energy Technology Data Exchange (ETDEWEB)

    Csatari Divall, Marta, E-mail: marta.divall@psi.ch [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Kaiser, Maik; Hunziker, Stephan; Vicario, Carlo; Beutner, Bolko; Schietinger, Thomas; Lüthi, Matthias; Pedrozzi, Marco [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Hauri, Christoph P. [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Ecole Polytechnique Federale de Lausanne, 1015 Lausanne (Switzerland)

    2014-01-21

    To produce short X-ray pulses for SwissFEL, it is necessary to compress the electron bunches by a factor of 300, down to sub-fs for the attosecond operational modes. To achieve stable FEL output accurate timing of the initial electron injection at the main linear accelerator is necessary. Tolerance studies show, that to reach the final performance goals, less than 40 fs relative rms jitter is required from the electron gun, relative to the reference. Here we present independent residual RF phase noise measurements of the laser oscillators, showing an exceptional ∼30 fs integrated rms jitter. Moreover timing studies at the SwissFEL Injector Test Facility, based on charge detection at the sharp rising edge of the Schottky-scan were performed allowing for systematic correlation studies and showing a residual jitter of ∼150 fs at 10 Hz from the pulsed laser system and beam transport respect to the reference. For future development, available relative jitter measurement techniques for pulsed laser systems will be reviewed and their applicability for laser arrival time monitoring and feedback for FEL applications will be discussed.

  5. A proposed VUV oscillator-based FEL upgrade at Jefferson Lab

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S. V. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Douglas, D. R. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Evtushenko, P. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Hannon, F. E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Hernandez-Garcia, C. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. M. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Legg, R. A. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Neil, G. R. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Shinn, M. D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tennant, C. D. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Zhang, S. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Williams, G. P. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2011-09-20

    Advances in superconducting linac technology offer the possibility of an upgrade of the Jefferson Lab Free Electron Laser (JLab FEL) facility to an oscillator-based VUV-FEL that would produce 6 x 10{sup 12} coherent 100 eV photons per pulse at multi-MHz repetition rates in the fundamental. At present JLab operates a pair of oscillator-based continuous-wave Free Electron Lasers (FELs) as a linac-based next generation light source in the IR and UV, with sub-picosecond pulses up to 75 MHz. Harmonics upwards of 10 eV are produced and the fully coherent nature of the source results in peak and average brightness values that are several orders of magnitude higher than storage rings. The accelerator uses an energy recovered linac design for efficiency of operation. New style superconducting linac cryomodules with higher gradient, combined with a new injector and beam transport system allow the development of the FEL to higher photon energies.

  6. Observation of superradiance in a short-pulse FEL oscillator

    NARCIS (Netherlands)

    Jaroszynski, D. A.; Chaix, P.; Piovella, N.; Oepts, D.; Knippels, G.M.H.; van der Meer, A. F. G.; Weits, H. H.

    1997-01-01

    Superradiance has been experimentally studied, in a short-pulse free-electron laser (FEL) oscillator. Superradiance is the optimal way of extracting optical radiation from an FEL and can be characterised by the following scale laws: peak optical power P, scales as the square of electron charge, Q, (

  7. Beam Property Measurements on the KU-FEL Linac

    CERN Document Server

    Masuda, Kai; Kii, Toshiteru; Murakami, Shio; Ohgaki, Hideaki; Yamazaki, Tetsuo; Yoshikawa, Kiyoshi; Zen, Heishun

    2004-01-01

    An infrared FEL facility is under construction for advanced energy researches [1]. Electron beams of around 30 MeV have been obtained by an S-band 4.5-cell rf gun with a thermionic cathode, and a recently installed 3-m accelerating tube. A 180 degree arc consisting of three bending magnets have been also set up for bunch compression, and beam property measurements are under way. Transverse phase space distributions and resultant emittances have been obtained through the tomographic technique [2] by use of a quadrupole magnet, an alumina phosphor screen and a CCD camera. An OTR screen is being prepared for a higher spatial resolution as well as for longitudinal bunch shape measurements by use of a streak camera of 0.2 psec resolution. Comparison with the start-to-end simulation results [3] will be also presented.

  8. Feedback Requirements for SASE-FELs

    Energy Technology Data Exchange (ETDEWEB)

    Loos, Henrik; /SLAC

    2012-07-06

    The operation of a Self Amplified Spontaneous Emission (SASE) Free Electron Lasers (FEL) at soft and hard X-ray wavelengths driven by a high brightness electron beam imposes strong requirements on the stability of the accelerator and feedback systems are necessary to both guarantee saturation of the SASE process as well as a stable photon beam for user experiments. Diagnostics for the relevant transverse and longitudinal beam parameters are presented and various examples of feedback systems for bunches with low repetition rate as well as systems for intra bunch train feedbacks are discussed.

  9. Harmonic Inverse FEL Interaction at 800nm

    CERN Document Server

    Sears, C M S; Siemann, R; Spencer, J E

    2005-01-01

    The inverse Free Electron Laser (IFEL) interaction has recently been proposed and demonstrated as a premodulator for High Gain Harmonic Generation (HGHG) experiments. These experiments utilized the fundamental of the interaction between the laser field and electron bunch. In the current experiment, we explore the higher order resonances of the IFEL interaction from a 3 period, 1.8 centimeter wavelength undulator with a picosecond, 0.25 mJ/pulse laser at 800nm. The resonances are observed by adjusting the gap of the undulator while keeping the beam energy constant. The harmonic IFEL can add flexibility to HGHG FEL design.

  10. Experimental and numerical study of short pulse effects in FELs

    CERN Document Server

    Khodyachykh, S; Genz, H; Hessler, C; Richter, A; Asgekar, V

    2004-01-01

    We report the experimental and numerical investigations of the influence of short pulse effects occurring in FELs in different operational regimes for electron bunch lengths which are of the order of the slippage distance. Several observables such as the small signal gain, the macropulse power and the spectral distribution of the FEL radiation were determined experimentally within the constraints of the stable focus regime at the infrared FEL at the S- DALINAC and for the limit cycle regime at the Dutch near infrared FEL FELIX. The experimental findings were compared to predictions of numerical simulations based on the 1D time dependent code FEL1D-OSC. The agreement between experiment and simulation is good. Furthermore, the simulations reveal a chaotic behavior of the macropulses for specific values of the slippage as well as period-doubling, two effects that are predicted to show up in the spectral distribution.

  11. Experimental and numerical study of short pulse effects in FELs

    Science.gov (United States)

    Khodyachykh, S.; Brunken, M.; Genz, H.; Hessler, C.; Richter, A.; Asgekar, V.

    2004-09-01

    We report the experimental and numerical investigations of the influence of short pulse effects occurring in FELs in different operational regimes for electron bunch lengths which are of the order of the slippage distance. Several observables such as the small signal gain, the macropulse power and the spectral distribution of the FEL radiation were determined experimentally within the constraints of the stable focus regime at the infrared FEL at the S-DALINAC and for the limit cycle regime at the Dutch near infrared FEL FELIX. The experimental findings were compared to predictions of numerical simulations based on the 1D time dependent code FEL1D-OSC. The agreement between experiment and simulation is good. Furthermore, the simulations reveal a chaotic behavior of the macropulses for specific values of the slippage as well as period-doubling, two effects that are predicted to show up in the spectral distribution.

  12. The Nonlinear Theory of FEL

    CERN Document Server

    Badikyan, Karen

    2016-01-01

    The nonlinear theory of relyativistic strophotron is developed. Classical equations of motion are averaged over fast oscillations. The slow motion phase and saturation parameter are found different from usual undulator oscillation parameters. In the strong field approximation the analytical expression of gain is found on higher harmonics of main resonance frequency.

  13. Transverse-coherence properties of the FEL at the LCLS

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Yuantao; Huang, Zhirong; /SLAC; Ocko, Samuel A.; /MIT, Cambridge, Dept. Phys.

    2010-09-02

    The recently commissioned Linac Coherent Light Source is an x-ray free-electron laser at the SLAC National Accelerator Laboratory, which is now operating at x-ray wavelengths of 20-1.2 Angstrom with peak brightness nearly ten orders of magnitude beyond conventional synchrotron sources. Understanding of coherence properties of the radiation from SASE FELs at LCLS is of great practical importance for some user experiments. We present the numerical analysis of the coherence properties at different wavelengths based on a fast algorithmusing ideal and start-end simulated FEL fields. The sucessful commissioning and operation of the linac coherent light source (LCLS) [1] has demonstrated that the x-ray free-electron laser (FEL) has come of age; these types of x-ray sources are poised to revolutionize the ultra-fast x-ray sciences. The LCLS and other hard x-ray FELs under construction are based on the principle of self-amplified spontaneous emission (SASE) [2, 3], where the amplification process starts from the shot noise in the electron beam. A large number of transverse radiation modes are also excited when the electron beam enters the undulator. The FEL collective instability in the electron beam causes the modulation of the electron density to increase exponentially, and after sufficient undulator distances, a single transverse mode starts to dominate. As a result, SASE FEL is almost fully coherent in the transverse dimension. Understanding of transverse coherence properties of the radiation from SASE FELs is of great practical importance. The longitudinal coherence properties of SASE FELs have been studied before [4]. Some studies on the transverse coherence can be found in previous papers, for example, in ref. [5, 6, 7, 8, 9]. In this paper, we first discuss a new numerical algorithm based on Markov chain Monte Carlo techniques to calculate the FEL transverse coherence. Then we focus on the numerical analysis of the LCLS FEL transverse coherence.

  14. Funding Research Software Development

    Science.gov (United States)

    Momcheva, Ivelina G.

    2017-01-01

    Astronomical software is used by each and every member of our scientific community. Purpose-build software is becoming ever more critical as we enter the regime of large datasets and simulations of increasing complexity. However, financial investments in building, maintaining and renovating the software infrastructure have been uneven. In this talk I will summarize past and current funding sources for astronomical software development, discuss other models of funding and introduce a new initiative for supporting community software at STScI. The purpose of this talk is to prompt discussion about how we allocate resources to this vital infrastructure.

  15. The ARC-EN-CIEL FEL Proposal

    CERN Document Server

    Couprie, M E

    2005-01-01

    ARC-EN-CIEL (Accelerator-Radiation for Enhanced Coherent Intense Extended Light), the French project of a fourth generation light source aims at providing the user community with coherent femtosecond light pulses covering from UV to soft X ray. It is based on a CW 1 GeV superconducting linear accelerator delivering high charge, subpicosecond, low emittance electron bunches with a high repetition rate. The FEL is based on in the injection of High Harmonics in Gases in a High Gain Harmonic Generation scheme, leading to a rather compact solution. The produced radiation extending down to 0.8 nm with the Non Linear Harmonic reproduces the good longitudinal and transverse coherence of the harmonics in gas. Optional beam loops are foreseen to increase the beam current or the energy. They will accommodate fs synchrotron radiation sources in the IR, VUV and X ray ranges and a FEL oscillator in the 10 nm range. An important synergy is expected between accelerator and laser communities. Indeed, electron plasma accelerat...

  16. FEL gain optimisation and spontaneous radiation

    Energy Technology Data Exchange (ETDEWEB)

    Bali, L.M.; Srivastava, A.; Pandya, T.P. [Lucknow Univ. (India)] [and others

    1995-12-31

    Colson have evaluated FEL gains for small deviations from perfect electron beam injection, with radiation of the same polarisation as that of the wiggler fields. We find that for optimum gain the polarisation of the optical field should be the same as that of the spontaneous emission under these conditions. With a helical wiggler the axial oscillations resulting from small departures from perfect electron beam injection lead to injection dependent unequal amplitudes and phases of the spontaneous radiation in the two transverse directions. Viewed along the axis therefore the spontaneous emission is elliptically polarised. The azimuth of the ellipse varies with the difference of phase of the two transverse components of spontaneous emission but the eccentricity remains the same. With planar wigglers the spontaneous emission viewed in the axial direction is linearly polarised, again with an injection dependent azimuth. For optimum coherent gain of a radiation field its polarisation characteristics must be the same as those of the spontaneous radiation with both types of wiggler. Thus, with a helical wiggler and the data reported earlier, an increase of 10% in the FEL gain at the fundamental frequency and of 11% at the fifth harmonic has been calculated in the small gain per pass limit. Larger enhancements in gain may result from more favourable values of input parameters.

  17. Present status and recent results from the APS SASE FEL

    CERN Document Server

    Lewellen, J W; Gluskin, E; Arnold, N D; Benson, C; Berg, W; Biedron, S G; Borland, M; Chae, Y C; Dejus, Roger J; Hartog, P K D; Deriy, B; Erdmann, M; Eidelman, Yu I; Hahne, M W; Huang, Z; Kim, K J; Li, Y; Lumpkin, Alex H; Makarov, O; Moog, E; Nassiri, A; Sajaev, Vadim; Soliday, R; Tieman, B J; Trakhtenberg, E; Vasserman, I B; Vinokurov, N A; Wiemerslage, G; Yang, B X

    2002-01-01

    The Low-Energy Undulator Test Line (LEUTL) at the Advanced Photon Source, Argonne National Laboratory, is intended to demonstrate the basic operation of a SASE-based free-electron laser. Goals include comparison of experimental results with theoretical predictions and scaling laws, identification of problems relevant to fourth-generation light source construction and operation and the means of addressing them, the development of operational and diagnostic techniques to optimize SASE FEL performance and increase repeatability from run to run, and performance of initial pioneering experiments capable of exploiting the unique properties of the laser. The basic layout and operational philosophy of the LEUTL experiment is presented. A summary of past results, including saturation, is reviewed, and a description of recent results is presented. We conclude with future plans, which include pressing to shorter wavelengths and incorporating user experiments into the LEUTL experimental program.

  18. Short wavelength FEL with helical micro-wiggler at FELI

    CERN Document Server

    Nakao, N; Goto, M; Ohigashi, N; Tsunawaki, Y; Moon, A; Nagai, A; Mima, K; Nakai, S; Yamanaka, C

    2000-01-01

    We are planning a short wavelength FEL experiment combining a micro-wiggler and an X-ray seed pulse. A micro-wiggler makes it possible to lase in the VUV to soft X-ray region using a low-energy electron beam. The development of the micro-wiggler is almost complete. With an intense X-ray seed pulse, quick start-up is expected making the wiggler length short. For the seed X-ray source we will use laser-produced Plasma. The validity of this concept was verified using a simulation code based on the SDE-method. With 10 kW X-ray power for seeding the saturation position is shortened to 5 m.

  19. Translational Research and Youth Development

    Science.gov (United States)

    Hamilton, Stephen F.

    2015-01-01

    Borrowing the term "translational research" (TR) from medicine, along with some of the ideas and practices that define it, holds promise as a way of linking research more closely to the practice of youth development. However, doing so entails substantial adaptation. TR is more than a new name for applied research. It comprehends the…

  20. Translational Research and Youth Development

    Science.gov (United States)

    Hamilton, Stephen F.

    2015-01-01

    Borrowing the term "translational research" (TR) from medicine, along with some of the ideas and practices that define it, holds promise as a way of linking research more closely to the practice of youth development. However, doing so entails substantial adaptation. TR is more than a new name for applied research. It comprehends the…

  1. Developments in the Nursing Research

    OpenAIRE

    2008-01-01

    Technological and social changes as well as changes in health and demographic developments have modified considerably the role of nursing and made nursing research more and more essential. Nursing research aims at developing knowledge that guides and supports the whole field of nursing practice in order to improve the quality of nursing care and thereby improves the status of the profession. Like nursing itself, nursing research began with Florence Nightingale in her hospital reforms first in...

  2. The Present Applications of IR FEL at Peking University

    CERN Document Server

    Yang Li Min; Zhao, Kui

    2004-01-01

    In this study the sections of human tissues were treated under 9.5 μm FEL in the BFEL based on the vibrational spectroscopic investigation that significant differences occur between normal and malignant tissues. Under the defocus condition, the burning of tissue section at some part while other part remains unchanged, suggesting that the FEL can selectively destroy some part of tissue. Vibrational spectroscopic and microscopic methods have shown that the FEL can induce decomposition of malignant tissues. The application of FEL whose wavelength is on the characteristic bands of malignant tissues may provide a new method to kill cancer cells with higher selectivity. For understanding the interactions between FEL and biological tissues, structure changes of substances under irradiation by FEL of 9.414 μm and 6.228 μm were measured using FTIR spectroscopy. The samples include ATP, ADP, AMP, and D-ribose, etc. The FTIR spectra of the molecules before and after irradiation of FEL indicate...

  3. Spontaneous emission effects in optically pumped x-ray FEL

    Energy Technology Data Exchange (ETDEWEB)

    Smetanin, I.V.; Grigor`ev, S.V. [P.N. Lebedev Physics Institute, Moscow (Russian Federation)

    1995-12-31

    An effect of spontaneous emission in both quantum and classical regimes of the optically pumped X-ray free electron laser (FEL) in investigated. The quantum properties of an FEL are determined by the ratio of the separation {h_bar} between the absorption and emission lines (i.e. the quanta emitted) and their effective width {Delta}{epsilon} {eta}={h_bar}/{Delta}{epsilon}. In the conventional classical regime {eta} {much_lt} 1 an electron emits and absorbes a great number of shortwavelength photons over the interaction region, the gain in FEL being the result of these competitive processes. In the quantum limit {eta} {much_gt} 1 the emission and absorption lines are completely separated and thus the FEL becomes a two-level quantum oscillator with a completely inverted active medium. Spontaneous emission causes the electron to leave the range of energies where resonant interaction with the laser field occurs, thus effectively reducing the number of particles that take part in generating the induced X-ray signal. This effect is found to be crucial for lasing in optically pumped X-ray FEL. The characteristic relaxation times are calculated for both classical and quantum FEL regimes. It is shown that spontaneous emission results in FEL electron beam threshold current, which is of rather high value. An optimal range of pumping laser intensities is determined.

  4. Reframing research on faculty development.

    Science.gov (United States)

    O'Sullivan, Patricia S; Irby, David M

    2011-04-01

    Research on faculty development has focused primarily on individual participants and has produced relatively little generalizable knowledge that can guide faculty development programs. In this article, the authors examine how current research on faculty development in medical education can be enriched by research in related fields such as teacher education, quality improvement, continuing medical education, and workplace learning. As a result of this analysis, the authors revise the old model for conceptualizing faculty development (preferably called professional development). This expanded model calls for research on educational process and outcomes focused on two communities of practice: the community created among participants in faculty development programs and the communities of teaching practice in the workplace (classroom or clinic) where teaching actually occurs. For the faculty development community, the key components are the participants, program, content, facilitator, and context in which the program occurs and in which the faculty teach. For the workplace community, associated components include relationships and networks of association in that environment, the organization and culture of the setting, the teaching tasks and activities, and the mentoring available to the members of that academic and/or clinical community of teaching practice. This expanded model of faculty development generates a new set of research questions, which are described along with six recommendations for enhancing research, including establishment of a national center for research in health professions education.

  5. Experimental Characterization of the Seeded FEL Amplifier at the BNL SDL

    CERN Document Server

    Watanabe, T; Murphy, J B; Rose, J; Shaftan, T V; Tsang, Thomas; Wang, X J; Yu, L H

    2005-01-01

    A laser seeded near IR FEL amplifier experiment was initiated at the BNL SDL [1] to explore various schemes of FEL efficiency improvement and generation of short Rayleigh length (SRL) FEL output. The FEL achieved first SASE lasing at 0.8 μm on May 6, 2005. The experimental characterization of the laser seeded FEL output power, spectrum and transverse mode structure evolution will be presented.

  6. Conceptual design of a high-brightness linac for soft X-ray SASE-FEL source

    Energy Technology Data Exchange (ETDEWEB)

    Alesini, D.; Bertolucci, S.; Biagini, M.E.; Biscari, C.; Boni, R.; Boscolo, M.; Castellano, M.; Clozza, A.; Pirro, G.D.G. Di; Drago, A.; Esposito, A.; Ferrario, M. E-mail: massimo.ferrario@lnf.infn.it; Fusco, V.; Gallo, A.; Ghigo, A.; Guiducci, S.; Incurvati, M.; Laurelli, P.; Ligi, C.; Marcellini, F.; Migliorati, M.; Milardi, C.; Palumbo, L.; Pellegrino, L.; Preger, M.; Raimondi, P.; Ricci, R.; Sanelli, C.; Sgamma, F.; Spataro, B.; Serio, M.; Stecchi, A.; Stella, A.; Tazzioli, F.; Vaccarezza, C.; Vescovi, M.; Vicario, C.; Zobov, M.; Acerbi, E.; Alessandria, F.; Barni, D.; Bellomo, G.; Birattari, C.; Bonardi, M.; Boscolo, I.; Bosotti, A.; Broggi, F.; Cialdi, S.; DeMartinis, C.; Giove, D.; Maroli, C.; Michelato, P.; Monaco, L.; Pagani, C.; Petrillo, V.; Pierini, P.; Serafini, L.; Sertore, D.; Volpini, G.; Chiadroni, E.; Felici, G.; Levi, D.; Mastrucci, M.; Mattioli, M.; Medici, G.; Petrarca, G.S.; Catani, L.; Cianchi, A.; D' Angelo, A.; Salvo, R.D.R. Di; Fantini, A.; Moricciani, D.; Schaerf, C.; Bartolini, R.; Ciocci, F.; Dattoli, G.; Doria, A.; Flora, F.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Mezi, L.; Ottaviani, P.L.; Picardi, L.; Quattromini, M.; Renieri, A.; Ronsivalle, C.; Avaldi, L.; Carbone, C.; Cricenti, A.; Pifferi, A.; Perfetti, P.; Prosperi, T.; Albertini, V.R.V. Rossi; Quaresima, C.; Zema, N

    2003-07-11

    FELs based on SASE are believed to be powerful tools to explore the frontiers of basic sciences, from physics to chemistry to biology. Intense R and D programs have started in the USA and Europe in order to understand the SASE physics and to prove the feasibility of these sources. The allocation of considerable resources in the Italian National Research Plan (PNR) brought about the formation of a CNR-ENEA-INFN-University of Roma 'Tor Vergata' study group. A conceptual design study has been developed and possible schemes for linac sources have been investigated, leading to the SPARX proposal. We report in this paper the results of a preliminary start to end simulation concerning one option we are considering based on an S-band normal conducting linac with high-brightness photoinjector integrated in an RF compressor.

  7. Parameter Analysis For A High-Gain Harmonic Generation FEL By Numerical Calculation Based On 1D Theory

    CERN Document Server

    Li, Yuhui; Zhang, Shancai

    2004-01-01

    The high-gain harmonic generation (HGHG) free-electron laser (FEL) is an important candidate for a fourth-generation light source. Lots of theoretical work has been performed. Recently a further 1D theory about HGHG FEL has been developed. It considers the effects of different parameters for the whole process. An initial program based on this theory has been made. In this paper, a brief comparison of the results from this 1D program and from TDA (3D code) is discussed. It also analyses the parameters for Shanghai deep ultra violate free-electron laser source (SDUV-FEL), including electron beam energy spread, seed laser power, strength of dispersion section etc.

  8. Stochastic Temporal Properties of the SASE FEL

    Energy Technology Data Exchange (ETDEWEB)

    Krinsky, S.

    2009-08-23

    We review the statistical description of the chaotic time evolution of the radiation from a self-amplified spontaneous-emission free-electron laser in the linear region before saturation. A high-gain, self-amplified spontaneous-emission (SASE) free-electron laser (FEL) [1, 2], based on modern beam technology, has the advantage of operating without a resonator and hence is capable of generating coherent radiation with wavelength down to the x-ray region. The LCLS at SLAC has recently achieved high gain and saturation at 1.5 {angstrom} [3]. A review of SASE theory can be found in ref. [4]. In this paper, we have considered the linear regime before saturation. In the nonlinear saturation regime, SASE is no longer a Gaussian process and analytic treatment is very difficult. A valuable numerical simulation analysis of the statistical behavior in the nonlinear regime can be found in ref. [10,11].

  9. Preliminary Design of a Synchronized Narrow Bandwidth FEL for Taiwan Light Source

    CERN Document Server

    Keung Lau Wai; Ching Fan, Tai; Zone Hsiao Feng; Tung Hsu Kuo; Hwang, Ching Shiang; Cheng Kuo Chin; Huei Luo Guo; Jen Wang Duan; Ping Wang Jau; Huey Wang Min

    2004-01-01

    Design study of a narrow line-width, high power IR-FEL facility has been carried out at NSRRC. This machine is designed to synchronize with the U9 undulator radiation of Taiwan Light Source and therefore provide new opportunity for chemical dynamics and condensed matter research. It has been proposed to use a super-conducting linac to provide a 60 MeV high quality electron beam to drive a 2.5-10 microns FEL oscillator with U5 undulator. Operating this linac in energy recovery mode will also be considered as an option to improve overall system effeciency and reduce heat loss and radiation dosage at the beam dump. Performance requirements and outcomes from this preliminary design study will be reported.

  10. Transverse Emittance Measurements In High-power Fir Fel Energy-recovery Linac

    CERN Document Server

    Bolotin, V P; Matveenko, A N; Shevchenko, O A; Vinokurov, N A

    2004-01-01

    50 MeV accelerator-recirculator of Siberian Center for Photochemical Research has been designed to drive the FIR FEL with an average power of up to 10 kW in the wavelengths region from 5 to 200 μm. The first stage with the beam energy of 14 MeV was put into operation and laser power of about 200 W on 150 μm was achieved recently [1]. Transverse emittance measurements are carried out online in a number of locations along the beam-line. OTR screens and video-cameras are used to capture the beam shape images, video signal is digitized by a frame grabber and the pictures are processed further. Online measurements allow the accelerator parameters to be optimized to minimize the emittance growth, which is essential to the FEL operation. The transverse emittance measurements system and data processing techniques are presented in this paper.

  11. Design considerations for the coherent radiator, FEL, in the MAX IV proposal

    CERN Document Server

    Werin, Sverker; Brandin, Mathias; Eriksson, Mikael; Hansen, T N; Larsson, Jörgen; Lindgren, L J; Tarawneh, Hamed

    2004-01-01

    The MAX IV proposal is a project for the next Swedish synchrotron radiation source. Currently a design study is produced with funding from the Swedish research council (VR). One half of the project will be a double storage ring (at 3 and 1.5 GeV respectively) but the other half will be a coherent radiator, FEL, based on the 3 GeV injector. The basic FEL solution will consist of a normal conducting linac at 3 GeV which feeds three seeded cascaded optical klystrons and a radiator undulator to produce radiation down to 1.5-3 nm at GW powers. To assure synchronisation the gun laser and the seed laser share initial laser and amplifier. This basic system can be enhanced in various ways which will be discussed .

  12. The SPARX Project R&D Activity towards X-rays FEL Sources

    CERN Document Server

    Alesini, David; Bertolucci, Sergio; Biagini, M E; Boni, R; Boscolo, Manuela; Castellano, Michele; Clozza, A; Di Pirro, G; Drago, A; Esposito, A; Ferrario, Massimo; Filippetto, D; Fusco, V; Gallo, A; Ghigo, A; Guiducci, Susanna; Incurvati, M; Ligi, C; Marcellini, F; Migliorati, Mauro; Mostacci, Andrea; Palumbo, Luigi; Pellegrino, L; Preger, Miro; Raimondi, Pantaleo; Ricci, R; Sanelli, C; Serio, Mario; Sgamma, F; Spataro, Bruno; Stecchi, A; Stella, A; Tazzioli, Franco; Vaccarezza, Cristina; Vescovi, Mario; Vicario, C

    2004-01-01

    SPARX is an evolutionary project proposed by a collaboration among ENEA-INFN-CNR-Università di Roma Tor Vergata aiming at the construction of a FEL-SASE X-ray source in the Tor Vergata Campus. The first phase of the SPARX project, funded by Government Agencies, will be focused on the R&D activity on critical components and techniques for future X-ray facilities. The R&D plans for the FEL source will be developped along two lines: (a) use of the SPARC high brightness photo-injector to develop experimental test on RF compression techniques and other beam physics issues, like emittance degradation in magnetic compressors due to CSR; (b) development of new undulator design concepts and up-grading of the FEL SPARC source to enhance the non linear harmonic generation mechanism, design and test of e-beam conditioning, prebunching and seeding. A parallel program will be aimed at the development of high repetition rate S-band gun, high Quantum Efficiency cathodes, high gradient X-band RF acceleratin...

  13. Electron Beam Diagnostic Based on a Short Seeded FEL

    CERN Document Server

    Graves, W; Kaertner, Franz X; Zwart, T

    2005-01-01

    The optical properties of an FEL amplifier are sensitively dependent on the electron beam current profile, energy spread, and transverse emittance. In this paper we consider using a short FEL amplifier operating on a low harmonic of a visible-IR input seed as a mildly destructive electron beam diagnostic able to measure these properties for sub-ps time slices. The optical methods are described as well as a planned implementation of the device for the FERMI@Elettra XUV FEL under construction at Sincrotrone Trieste, including its fiber-based seed laser closely coupled with the facility timing system, undulator parameters, and requirements on the electron and FEL pulses. This diagnostic is conveniently integrated with a "laser heater" designed to increase the very low electron beam energy spread produced by a photoinjector in order to avoid space charge and coherent synchrotron radiation instabilities.

  14. Electro-Magnetic Quadrupole Magnets in the LCLS FEL Undulator

    Energy Technology Data Exchange (ETDEWEB)

    Emma, P.

    2005-01-31

    We discuss various aspects of electro-magnetic quadrupole (EMQ) magnets for the LCLS FEL undulator, including their utility in beam-based alignment (BBA), magnet design issues, and impact on tunnel environment, reliability, and cost.

  15. Optical properties of infrared FELs from the FELI Facility II

    Energy Technology Data Exchange (ETDEWEB)

    Saeki, K.; Okuma, S.; Oshita, E. [Free Electron Laser Institute, Osaka (Japan)] [and others

    1995-12-31

    The FELI Facility II has succeeded in infrared FEL oscillation at 1.91 {mu} m using a 68-MeV, 40-A electron beam from the FELI S-band linac in February 27, 1995. The FELI Facility II is composed of a 3-m vertical type undulator ({lambda}u=3.8cm, N=78, Km a x=1.4, gap length {ge}20mm) and a 6.72-m optical cavity. It can cover the wavelength range of 1-5{mu}m. The FELs can be delivered from the optical cavity to the diagnostics room through a 40-m evacuated optical pipeline. Wavelength and cavity length dependences of optical properties such as peak power, average power, spectrum width, FEL macropulse, FEL transverse profile are reported.

  16. JLAMP: AN AMPLIFIER-BASED FEL IN THE JLAB SRF ERL DRIVER

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Jordan; Stephen V. Benson; David Douglas; Pavel Evtushenko; Carlos Hernandez-Garcia; George R. Neil

    2007-06-13

    Notional designs for energy-recovering linac (“ERL”) -driven high average power free electron lasers (“FEL”s) often invoke amplifier-based architectures. To date, however, amplifier FELs have been limited in average power output to values several orders of magnitude lower than those demonstrated in optical-resonator based systems; this is due at least in part to the limited electron beam powers available from their driver accelerators. In order to directly contrast the performance available from amplifiers to that provided by high-power cavity-based resonators, we have developed a scheme to test an amplifier FEL in the JLab SRF ERL driver. We describe an accelerator system design that can seamlessly and non-invasively integrate a 10 m wiggler into the existing system and which provides, at least in principle, performance that would support high-efficiency lasing in an amplifier configuration. Details of the design and an accelerator performance analysis will be presented

  17. Design Studies for a High-Repetition-Rate FEL Facility at LBNL.

    Energy Technology Data Exchange (ETDEWEB)

    CORLETT, J.; BELKACEM, A.; BYRD, J. M.; FAWLEY, W.; KIRZ, J.; LIDIA, S.; MCCURDY, W.; PADMORE, H.; PENN, G.; POGORELOV, I.; QIANG, J.; ROBIN, D.; SANNIBALE, F.; SCHOENLEIN, R.; STAPLES, J.; STEIER, C.; VENTURINI, M.; WAN, W.; WILCOX, R.; ZHOLENTS, A.

    2007-10-04

    Lawrence Berkeley National Laboratory (LBNL) is working to address the needs of the primary scientific Grand Challenges now being considered by the U.S. Department of Energy, Office of Basic Energy Sciences: we are exploring scientific discovery opportunities, and new areas of science, to be unlocked with the use of advanced photon sources. A partnership of several divisions at LBNL is working to define the science and instruments needed in the future. To meet these needs, we propose a seeded, high-repetition-rate, free-electron laser (FEL) facility. Temporally and spatially coherent photon pulses, of controlled duration ranging from picosecond to sub-femtosecond, are within reach in the vacuum ultraviolet (VUV) to soft X-ray regime, and LBNL is developing critical accelerator physics and technologies toward this goal. We envision a facility with an array of FELs, each independently configurable and tunable, providing a range of photon-beam properties with high average and peak flux and brightness.

  18. Internationalization of Research and Development

    DEFF Research Database (Denmark)

    Håkanson, Lars

    2014-01-01

    This chapter outlines historical and recent trends in the internationalization of research and development (R&D) in multinational corporations (MNCs). It discusses the motives and driving forces that lead firms to perform R&D in foreign locations and the managerial and policy issues associated......, in some cases, applied and basic research. Managerial systems, procedures, and practices for coordination and control of internationally decentralized R&D are identified, along with mechanisms promoting knowledge management, problem solving, and innovation....

  19. NGNP Research and Development Status

    Energy Technology Data Exchange (ETDEWEB)

    David A. Petti

    2010-08-01

    At the inception of the Next Generation Nuclear Plant (NGNP) project, experts from the Department of Energy (DOE) national laboratories, gas reactor vendors, and universities collaborated to establish technology research and development (R&D) roadmaps. These roadmaps outlined the testing and computational development activities needed to qualify the materials and validate the modeling and simulation tools to be used in the design and safe operation of the NGNP, a helium-cooled, high temperature gas reactor (HTGR).

  20. Commissioning experience and beam physics measurements at the SwissFEL Injector test Facility

    CERN Document Server

    Schietinger, T.; Aiba, M.; Arsov, V.; Bettoni, S.; Beutner, B.; Calvi, M.; Craievich, P.; Dehler, M.; Frei, F.; Ganter, R.; Hauri, C. P.; Ischebeck, R.; Ivanisenko, Y.; Janousch, M.; Kaiser, M.; Keil, B.; Löhl, F.; Orlandi, G. L.; Ozkan Loch, C.; Peier, P.; Prat, E.; Raguin, J.-Y.; Reiche, S.; Schilcher, T.; Wiegand, P.; Zimoch, E.; Anicic, D.; Armstrong, D.; Baldinger, M.; Baldinger, R.; Bertrand, A.; Bitterli, K.; Bopp, M.; Brands, H.; Braun, H. H.; Brönnimann, M.; Brunnenkant, I.; Chevtsov, P.; Chrin, J.; Citterio, A.; Csatari Divall, M.; Dach, M.; Dax, A.; Ditter, R.; Divall, E.; Falone, A.; Fitze, H.; Geiselhart, C.; Guetg, M. W.; Hämmerli, F.; Hauff, A.; Heiniger, M.; Higgs, C.; Hugentobler, W.; Hunziker, S.; Janser, G.; Kalantari, B.; Kalt, R.; Kim, Y.; Koprek, W.; Korhonen, T.; Krempaska, R.; Laznovsky, M.; Lehner, S.; Le Pimpec, F.; Lippuner, T.; Lutz, H.; Mair, S.; Marcellini, F.; Marinkovic, G.; Menzel, R.; Milas, N.; Pal, T.; Pollet, P.; Portmann, W.; Rezaeizadeh, A.; Ritt, S.; Rohrer, M.; Schär, M.; Schebacher, L.; Scherrer, St.; Schlott, V.; Schmidt, T.; Schulz, L.; Smit, B.; Stadler, M.; Steffen, Bernd; Stingelin, L.; Sturzenegger, W.; Treyer, D. M.; Trisorio, A.; Tron, W.; Vicario, C.; Zennaro, R.; Zimoch, D.

    2016-10-26

    The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including atransverse deflecting rf cavity. It delivered electron bunchesof up to200 pC chargeand up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of a FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measureme...

  1. Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

    Directory of Open Access Journals (Sweden)

    T. Schietinger

    2016-10-01

    Full Text Available The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measurements performed during the operation of the test facility, including the results of the test of an in-vacuum undulator prototype generating radiation in the vacuum ultraviolet and optical range.

  2. Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

    CERN Document Server

    Schietinger, T; Aiba, M; Arsov, V; Bettoni, S; Beutner, B; Calvi, M; Craievich, P; Dehler, M; Frei, F; Ganter, R; Hauri, C P; Ischebeck, R; Ivanisenko, Y; Janousch, M; Kaiser, M; Keil, B; Löhl, F; Orlandi, G L; Loch, C Ozkan; Peier, P; Prat, E; Raguin, J -Y; Reiche, S; Schilcher, T; Wiegand, P; Zimoch, E; Anicic, D; Armstrong, D; Baldinger, M; Baldinger, R; Bertrand, A; Bitterli, K; Bopp, M; Brands, H; Braun, H H; Brönnimann, M; Brunnenkant, I; Chevtsov, P; Chrin, J; Citterio, A; Divall, M Csatari; Dach, M; Dax, A; Ditter, R; Divall, E; Falone, A; Fitze, H; Geiselhart, C; Guetg, M W; Hämmerli, F; Hauff, A; Heiniger, M; Higgs, C; Hugentobler, W; Hunziker, S; Janser, G; Kalantari, B; Kalt, R; Kim, Y; Koprek, W; Korhonen, T; Krempaska, R; Laznovsky, M; Lehner, S; Pimpec, F Le; Lippuner, T; Lutz, H; Mair, S; Marcellini, F; Marinkovic, G; Menzel, R; Milas, N; Pal, T; Pollet, P; Portmann, W; Rezaeizadeh, A; Ritt, S; Rohrer, M; Schär, M; Schebacher, L; Scherrer, St; Schmidt, V Schlott T; Schulz, L; Smit, B; Stadler, M; Steffen, B; Stingelin, L; Sturzenegger, W; Treyer, D M; Trisorio, A; Tron, W; Vicario, C; Zennaro, R; Zimoch, D

    2016-01-01

    The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and testbed for the development and realization of SwissFEL, the X-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultra-low-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics meas...

  3. Harmonic cascade FEL designs for LUX, a facility for ultrafast x-ray science

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, John; Fawley, William; Penn, Gregory; Wan, Weishi; Zholents, A.; Reinsch, M.; Wurtele, Jonathan

    2004-08-25

    LUX is a design study to develop concepts for future ultrafast x-ray facilities. Presently, LUX is based on an electron beam accelerated to {approx}3-GeV energy in a superconducting, recirculating linac. Included in the design are multiple free-electron laser (FEL) beamlines which use the harmonic cascade approach to produce coherent XUV and soft X-ray emission beginning with a strong input seed at {approx}200-nm wavelength obtained from a ''conventional'' laser. Each cascade module generally operates in the low-gain regime and is composed of a radiator together with a modulator section, separated by a magnetic chicane. The chicane temporally delays the electron beam pulse in order that a ''virgin'' pulse region (with undegraded energy spread) be brought into synchronism with the radiation pulse. For a given cascade, the output photon energy can be selected over a wide range by varying the seed laser wavelength and the field strength in the undulators. We present numerical simulation results, as well as those from analytical models, to examine certain aspects of the predicted FEL performance. We also discuss lattice considerations pertinent to harmonic cascade FELs, some sensitivity studies and requirements on the undulator alignment, and temporal pulse evolution initiated by short input radiation seeds.

  4. Research Facility Development at CAS

    Institute of Scientific and Technical Information of China (English)

    Tian Dongsheng; Miao Yougui; Zhang Hongsong

    2005-01-01

    @@ This article gives an introductory account on the development of research facilities at the CAS over the past six years since the initiation of the Knowledge Innovation Program in 1998 and during the period of the national 10th Five-year Plan in particular. In addition, it expounds the key points for the future work at the CAS in this regard.

  5. Suborbital Research and Development Opportunities

    Science.gov (United States)

    Davis, Jeffrey R.

    2011-01-01

    This slide presentation reviews the new strategies for problem solving in the life sciences in the suborbital realm. Topics covered are: an overview of the space life sciences, the strategic initiatives that the Space Life Sciences organization engaged in, and the new business model that these initiatives were developed. Several opportunities for research are also reviewed.

  6. Optimization Issues in a Harmonic Cascade FEL

    CERN Document Server

    De Ninno, G

    2005-01-01

    Presently there is significant interest by multiple groups (e.g. BNL, ELETTRA, LBNL, BESSY, MIT) to reach short output wavelengths via a harmonic cascade FEL using an external seed laser. In a multistage device, there are a number of "free" parameters such as the nominal power of the input seed, the lengths of the individual modulator and radiator undulators, the strengths (i.e. the R56's) of the dispersive sections, the choice of the actual harmonic numbers to reach a given wavelength, etc., whose optimization is a non-trivial exercise. In particular, one can choose whether to operate predominantly in the "high gain" regime such as was proposed by Yu [1] in which case each radiator undulator is many gain lengths long or, alternatively, in the "low gain" regime in which case all undulators (except possibly the last radiator) are a couple gain lengths or less long and the output from each radiator essentially corresponds to coherent spontaneous emission from a pre-bunched beam. With particular emphasis upon th...

  7. Development of Trusted Computing Research

    Institute of Scientific and Technical Information of China (English)

    ZHANG Huanguo; LUO Jie; JIN Gang; ZHU Zhiqiang; YU Fajiang; YAN Fei

    2006-01-01

    Trusted computing is the new trend of information security today. This paper surveys the theory and technology of trusted computing. The development history of trusted computing, and the development of trusted computing in China are introduced in this paper,and then it analyzes some problems of trusted computing at present which are delay in theory research, some key technologies to be developed and lack of trusted software system. Some fields are worthy to be explored on are pointed out including key technology, basic theory and application in trusted computing.

  8. Fundamental Research and Developing Countries

    CERN Document Server

    Narison, Stéphan

    2002-01-01

    In the first part of this report, I discuss the sociological role of fundamental research in Developing Countries (DC) and how to realize this program. In the second part, I give a brief and elementary introduction to the field of high-energy physics (HEP), accessible to a large audience not necessary physicists. The aim of this report is to make politicians and financial backers aware on the long-term usefulness of fundamental research in DC and on the possible globalisation of HEP and, in general, of science.

  9. Doctoral research on cadastral development

    DEFF Research Database (Denmark)

    Cagdas, Volkan; Stubkjær, Erik

    2009-01-01

    . The article focuses on the methodological aspect of doctoral research by analyzing ten doctoral dissertations. Our analysis is based on a taxonomy of methodological elements and aims at identifying commonalities and differences among the dissertations in the use of concepts and methods. Having completed......The multitude of rights in land and the recording of these rights are addressed by a number of studies, yet a recognized paradigm for such studies seems missing. Rights in land are recorded and managed through either cadastral systems or land administration systems depending on the legal system...... of cadastral development. This research is multi-disciplinary and draws on elements of theories and methodologies from the natural, the social, the behavioral, and the formal sciences. During the last decade or so, doctoral dissertations have come to constitute a substantial part of this research effort...

  10. Internationalization of Research and Development

    DEFF Research Database (Denmark)

    Håkanson, Lars

    2014-01-01

    This chapter outlines historical and recent trends in the internationalization of research and development (R&D) in multinational corporations (MNCs). It discusses the motives and driving forces that lead firms to perform R&D in foreign locations and the managerial and policy issues associated...... with geographically dispersed and organizationally decentralized R&D. A simple typology of foreign R&D units is presented, emphasizing that the opportunities and challenges vary with the nature of their tasks, which range from technical support and local adaptation of products and processes to product development and......, in some cases, applied and basic research. Managerial systems, procedures, and practices for coordination and control of internationally decentralized R&D are identified, along with mechanisms promoting knowledge management, problem solving, and innovation....

  11. Research and development serving society

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    In the F. R. of Germany we can look back to a successful development of r and d in industry, science and private as well as public research institutions. After it had become necessary to fill the 'technological gap', and to bridge over the distance towards other industrial countries more and more technologies and problem fields were developed apart from nuclear engineering and space research like electronics, communication engineering, transport and traffic, non-nuclear energy generation, environment research, health research, bioengineering and the humanization of work. The success and the activities of the past are considerable but so are the challenges of the future. In view of the undiminished worldwide population growth we shall have to reckon with an increased demand for energy and raw materials. That is why it is more important than ever to handle all resources of the world more economically, and with more care. The promotion of technologies which can diminish on dependence on raw materials and energy, reduce the ecological burdens and improve the living and working conditions shall remain the main objective of the BMFT. This brochure policy and the promotion tasks which are performed by the Bundesministerium fuer Forschung und Technologie.

  12. Design of a high average-power FEL driven by an existing 20 MV electrostatic-accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kimel, I.; Elias, L.R. [Univ. of Central Florida, Orlando, FL (United States)

    1995-12-31

    There are some important applications where high average-power radiation is required. Two examples are industrial machining and space power-beaming. Unfortunately, up to date no FEL has been able to show more than 10 Watts of average power. To remedy this situation we started a program geared towards the development of high average-power FELs. As a first step we are building in our CREOL laboratory, a compact FEL which will generate close to 1 kW in CW operation. As the next step we are also engaged in the design of a much higher average-power system based on a 20 MV electrostatic accelerator. This FEL will be capable of operating CW with a power output of 60 kW. The idea is to perform a high power demonstration using the existing 20 MV electrostatic accelerator at the Tandar facility in Buenos Aires. This machine has been dedicated to accelerate heavy ions for experiments and applications in nuclear and atomic physics. The necessary adaptations required to utilize the machine to accelerate electrons will be described. An important aspect of the design of the 20 MV system, is the electron beam optics through almost 30 meters of accelerating and decelerating tubes as well as the undulator. Of equal importance is a careful design of the long resonator with mirrors able to withstand high power loading with proper heat dissipation features.

  13. [Pharmaceutical technology: development and research].

    Science.gov (United States)

    Traisnel, M

    1994-06-01

    Production of pharmaceutics cannot be compared to the manufacture of consumer goods: pharmaceutical manufacturing is the study and bulk manufacture of the ingredients from which medicines are made, and is concerned with the mixing, preparing, packing, of the ingredients into a dosage form for the patient, in according to the good manufacturing practices (GMP). Development and manufacture are not discrete activities but links in a single chain of activity. Research and development, pharmaceutical training, regulatory requirements: these concepts are present with three ways: bioavailability, targeting and compliance.

  14. Beam dynamics simulations for linacs driving short-wavelength FELs

    Energy Technology Data Exchange (ETDEWEB)

    Ferrario, M.; Tazzioli, F. [Istituto Nazionale di Fisica Nucleare, Frascati, RM (Italy). Laboratori nazionali di Frascati; Serafini, L. [Milan Univ., Milan (Italy); Istituto Nazionale di Fisica Nucleare, Milan (Italy)

    1999-07-01

    The fast code HOMDYN has been recently developed, in the framework of the TTF (Tesla test facility) collaboration, in order to study the beam dynamics of linacs delivering high brightness beams as those needed for short wavelength Fel experiments. These linacs are typically driven by radio-frequency photo-injectors, where correlated time dependent space charge effects are of great relevance: these effects cannot be studied by standard beam optics codes (TRACE3D, etc.) and they have been modeled so far by means of multi-particle (Pic or quasistatic) codes requiring heavy cpu time and memory allocations. HOMDYN is able to describe the beam generation at the photo-cathode and the emittance compensation process in the injector even running on a laptop with very modest running rimes (less than a minute). In this paper it is showed how this capability of the code is exploited so to model a whole linac up to the point where the space charge dominated regime is of relevance (200 MeV).

  15. Application of a PWFA to an X-ray FEL

    CERN Document Server

    Israeli, Yasmine; Reiche, Sven; Pedrozzi, Marco; Muggli, Patric

    2016-01-01

    There is a growing demand for X-ray Free-electron lasers (FELs) in various science fields, in particular for those with short pulses, larger photon fluxes and shorter wavelengths. The level of X-ray power and the pulse energy depend on the amount of electron bunch energy. Increasing the latter will increase the power of the radiating X-rays. Using numerical simulations we explore the possibility of using a plasma wakefield accelerator (PWFA) scheme to increase the electron beam energy of an existing FEL facility without significantly increasing the accelerator length. In this paper we use parameters of the SwissFEL beam. The simulations are carried out in 2D cylindrical symmetry using the code OSIRIS. Initial results show an energy gain of ~2 GeV after propagation of 0.5 m in the plasma with a relative energy spread of ~1%.

  16. Center Independent Research & Developments: JPL IRAD Program

    Data.gov (United States)

    National Aeronautics and Space Administration — Innovative projects are sought in the areas of basic research, fundamental research, applied research, development and systems and other concept formulation studies....

  17. The bunch compression system at the TESLA test facility FEL

    Science.gov (United States)

    Limberg, T.; Weise, H.; Molodozhentsev, A.; Petrov, V.

    1996-02-01

    A SASE-FEL [A.M. Kontradenko and E.L. Saldin, Particle Accelerators 10 (1980) 207; R. Bonifacio, C. Pellegrini and I.M. Narducci, Opt. Commun. 50 (1884) 373] requires extremely high peak currents which cannot be achieved by electron guns. The bunch length therefore has to be reduced along the accelerating linac, the bunch has to be compressed. In the TTF-FEL this is done with the help of bending magnet chicanes in three stages. We present the lay-out of the scheme as well as first beam dynamics calculations.

  18. STARS A Two Stage High Gain Harmonic Generation FEL Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    M. Abo-Bakr; W. Anders; J. Bahrdt; P. Budz; K.B. Buerkmann-Gehrlein; O. Dressler; H.A. Duerr; V. Duerr; W. Eberhardt; S. Eisebitt; J. Feikes; R. Follath; A. Gaupp; R. Goergen; K. Goldammer; S.C. Hessler; K. Holldack; E. Jaeschke; Thorsten Kamps; S. Klauke; J. Knobloch; O. Kugeler; B.C. Kuske; P. Kuske; A. Meseck; R. Mitzner; R. Mueller; M. Neeb; A. Neumann; K. Ott; D. Pfluckhahn; T. Quast; M. Scheer; Th. Schroeter; M. Schuster; F. Senf; G. Wuestefeld; D. Kramer; Frank Marhauser

    2007-08-01

    BESSY is proposing a demonstration facility, called STARS, for a two-stage high-gain harmonic generation free electron laser (HGHG FEL). STARS is planned for lasing in the wavelength range 40 to 70 nm, requiring a beam energy of 325 MeV. The facility consists of a normal conducting gun, three superconducting TESLA-type acceleration modules modified for CW operation, a single stage bunch compressor and finally a two-stage HGHG cascaded FEL. This paper describes the faciliy layout and the rationale behind the operation parameters.

  19. VISA IB Ultra-High Bandwidth, High Gain SASE FEL

    CERN Document Server

    Andonian, Gerard; Murokh, Alex; Pellegrini, Claudio; Reiche, Sven; Rosenzweig, J B; Travish, Gil

    2004-01-01

    The results of a high energy-spread SASE FEL experiment, the intermediary experiment linking the VISA I and VISA II projects, are presented. A highly chirped beam (~1.7%) was transported without correction of longitudinal aberrations in the ATF dogleg, and injected into the VISA undulator. The output FEL radiation displayed an uncharacteristicly large bandwidth (~11%) with extremely stable lasing and measured energy of about 2 microJoules. Start-to-end simulations reproduce key features of the measured results and provide an insight into the mechanisms giving rise to such a high bandwidth. These analyses are described as they relate to important considerations for the VISA II experiment.

  20. Quasi-isochronous storage ring for enhanced FEL performance

    Science.gov (United States)

    Ohgaki, H.; Robin, D.; Yamazaki, T.

    1996-02-01

    A compact storage ring is designed to be used as driver for a free electron laser (FEL). This ring can be operated very close to zero momentum compaction factor (α) to increase the electron density and thus the gain of the FEL. In order to control α with zero dispersion in the straight sections we use an inverted dipole located between the bending magnets and 4 families of quadrupoles. By using 3 families of sextupoles we can control the 2 transverse chromaticities and 2nd order momentum compaction. We find that the ring has sufficient dynamic aperture for good performance.

  1. Development Model for Research Infrastructures

    Science.gov (United States)

    Wächter, Joachim; Hammitzsch, Martin; Kerschke, Dorit; Lauterjung, Jörn

    2015-04-01

    Research infrastructures (RIs) are platforms integrating facilities, resources and services used by the research communities to conduct research and foster innovation. RIs include scientific equipment, e.g., sensor platforms, satellites or other instruments, but also scientific data, sample repositories or archives. E-infrastructures on the other hand provide the technological substratum and middleware to interlink distributed RI components with computing systems and communication networks. The resulting platforms provide the foundation for the design and implementation of RIs and play an increasing role in the advancement and exploitation of knowledge and technology. RIs are regarded as essential to achieve and maintain excellence in research and innovation crucial for the European Research Area (ERA). The implementation of RIs has to be considered as a long-term, complex development process often over a period of 10 or more years. The ongoing construction of Spatial Data Infrastructures (SDIs) provides a good example for the general complexity of infrastructure development processes especially in system-of-systems environments. A set of directives issued by the European Commission provided a framework of guidelines for the implementation processes addressing the relevant content and the encoding of data as well as the standards for service interfaces and the integration of these services into networks. Additionally, a time schedule for the overall construction process has been specified. As a result this process advances with a strong participation of member states and responsible organisations. Today, SDIs provide the operational basis for new digital business processes in both national and local authorities. Currently, the development of integrated RIs in Earth and Environmental Sciences is characterised by the following properties: • A high number of parallel activities on European and national levels with numerous institutes and organisations participating

  2. Laboratory directed research and development

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-15

    The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

  3. Research and Development. Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This report discusses the research and development activities in which NVE has been involved in 2000. These activities fall into three categories: watercourse research, hydrological research and energy related research. The HYDRA research programme, which studied flooding and human intervention, is discussed in particular. The report includes a list of research and development reports that were published in 2000.

  4. Single-shot measurement of free-electron laser polarization at SDUV-FEL

    CERN Document Server

    Feng, Lie; Zhang, Tong; Feng, Chao; Chen, Jianhui; Wang, Xingtao; Lan, Taihe; Shen, Lei; Zhang, Wenyan; Yao, Haifeng; Liu, Xiaoqing; Liu, Bo; Wang, Dong

    2014-01-01

    In this paper, a division-of-amplitude photopolarimeter (DOAP) for measuring the polarization state of free-electron laser (FEL) pulse is described. The incident FEL beam is divided into four separate beams, and four Stokes parameters can be measured in a single-shot. In the crossed-planar undulators experiment at Shanghai deep ultraviolet FEL test facility, this DOAP instrument constructed in house responses accurately and timely while the polarization-state of fully coherent FEL pulses are switched, which is helpful for confirming the crossed-planar undulators technique for short-wavelength FELs.

  5. Carbon sequestration research and development

    Energy Technology Data Exchange (ETDEWEB)

    Reichle, Dave; Houghton, John; Kane, Bob; Ekmann, Jim; and others

    1999-12-31

    Predictions of global energy use in the next century suggest a continued increase in carbon emissions and rising concentrations of carbon dioxide (CO{sub 2}) in the atmosphere unless major changes are made in the way we produce and use energy--in particular, how we manage carbon. For example, the Intergovernmental Panel on Climate Change (IPCC) predicts in its 1995 ''business as usual'' energy scenario that future global emissions of CO{sub 2} to the atmosphere will increase from 7.4 billion tonnes of carbon (GtC) per year in 1997 to approximately 26 GtC/year by 2100. IPCC also projects a doubling of atmospheric CO{sub 2} concentration by the middle of next century and growing rates of increase beyond. Although the effects of increased CO{sub 2} levels on global climate are uncertain, many scientists agree that a doubling of atmospheric CO{sub 2} concentrations could have a variety of serious environmental consequences. The goal of this report is to identify key areas for research and development (R&D) that could lead to an understanding of the potential for future use of carbon sequestration as a major tool for managing carbon emissions. Under the leadership of DOE, researchers from universities, industry, other government agencies, and DOE national laboratories were brought together to develop the technical basis for conceiving a science and technology road map. That effort has resulted in this report, which develops much of the information needed for the road map.

  6. Research and development for X-ray optics and diagnostics on the linac coherent light source (LCLS)

    CERN Document Server

    Wootton, A; Barbee, T W; Bionta, R; Jankowski, A; London, R; Ryutov, D; Shepherd, R; Shlyaptsev, V; Tatchyn, R; Toor, A

    2002-01-01

    The Linac Coherent Light Source is a 1.5-15 A-wavelength free-electron laser (FEL), currently proposed for the Stanford Linear Accelerator Center. The photon output consists of high brightness, transversely coherent pulses with duration <300 fs, together with a broad spontaneous spectrum with total power comparable to the coherent output. The output fluence, and pulse duration, pose special challenges for optical component and diagnostic designs. We first discuss the specific requirements for the initial scientific experiments, and our proposed solutions. We then describe the supporting research and development program that includes: experimental and theoretical material damage studies; high-resolution multilayer design, fabrication, and testing; replicated closed-form optics design and manufacturing; BeB manufacturing; and low-Z Fresnel lens design, fabrication and testing. Finally, some novel concepts for optical components are presented.

  7. Towards imaging of ultrafast molecular dynamics using FELs

    NARCIS (Netherlands)

    Rouzee, A.; Johnsson, P.; Rading, L.; Siu, W.; Huismans, Y.; Duesterer, S.; Redlin, H.; Tavella, F.; Stojanovic, N.; Al-Shemmary, A.; Lepine, F.; Holland, D. M. P.; Schlathölter, Thomas; Hoekstra, R.; Fukuzawa, H.; Ueda, K.; Vrakking, M. J. J.; Hundertmark, A.

    2013-01-01

    The dissociation dynamics induced by a 100 fs, 400 nm laser pulse in a rotationally cold Br-2 sample was characterized by Coulomb explosion imaging (CEI) using a time-delayed extreme ultra-violet (XUV) FEL pulse, obtained from the Free electron LASer in Hamburg (FLASH). The momentum distribution of

  8. Optimization Studies of the FERMI at ELETTRA FEL Design

    CERN Document Server

    De Ninno, G

    2005-01-01

    The FERMI at ELETTRA project at Sincotrone Trieste involves two FEL's, each based upon the principle of a seeded harmonic cascade and using the existing ELETTRA injection linac at 1.2 GeV beam energy. Scheduled to be completed in 2008, FEL-1 will operate in the 40-100 nm wavelength range and will involve one stage of harmonic up-conversion. The second phase, FEL-2, will begin operation two years later in the 10-40 nm wavelength range and will involve two cascade stages. FEL design assumes wavelength tunability over the full wavelength range and polarization tunability of the output radiation including helical polarization. The design considers focusing properties and segmentation of realizable undulators and available input seed lasers. We discuss how the interplay between various limitations and self-consistent accelerator simulations [1,2] have led to our current design. We present results of simulations using GENESIS and GINGER simulation codes including studies of various shot-to-shot fluctuations and und...

  9. Coherence Improvement of the BESSY HGHG FEL Radiation

    CERN Document Server

    Abo-Bakr, M; Meseck, A

    2005-01-01

    BESSY proposes a soft X-ray free electron laser (FEL) multi-user facility. It will consist of three undulator lines, each based on a cascaded High-Gain Harmonic-Generation (HGHG) scheme. With a seed laser, tunable between 230 nm and 460 nm, the desired output radiation wavelength range from 1.24 nm to 51 nm can be covered. Signal to noise ratio and coherence of the HGHG FEL radiation degrades quadratically with the harmonic number. For the short-wavelength BESSY-FEL line, operating on the 225th harmonic of the seed, a cure to this effect and maintaining the coherence is to improve the spectral purity of the output radiation by implementation of a "non-dispersive double-monochromator" system between two HGHG stages. Layout and parameters of such a monochromator section are described. To separate the electron beam path from the optical devices a bypass section is needed. Its design is presented and influences on the electron beam dynamics are discussed. Simulations of the full cascaded HGHG FEL, using the resto...

  10. Investigation of 3d Effects on Fel Operation

    NARCIS (Netherlands)

    van Werkhoven, G. H. C.; Faatz, B.; Schep, T. J.

    1993-01-01

    An investigation is made of 3D effects on FEL operation by comparing the 3D simulation code TDA with a 1 1/2D model. In the latter model, the full spatial dependence of the radiation field is taken into account, whereas the electrons are treated as moving in a 1D, density-averaged ponderomotive pote

  11. Application of electro-optic sampling in FEL diagnostics

    NARCIS (Netherlands)

    Yan, X.; MacLeod, A. M.; Gillespie, W. A.; Knippels, G.M.H.; Oepts, D.; van der Meer, A. F. G.

    2001-01-01

    The electro-optic sampling technique has been used for the full characterization (both amplitude and phase) of freely propagating pulsed electromagnetic radiation (such as FEL pulses, transition radiation) and for the quasistatic electric field of relativistic electron bunches. Measurements of the e

  12. Ultrafast Coherent Control and Characterization of Surface Reactions using FELs

    Energy Technology Data Exchange (ETDEWEB)

    Ogasawara, Hirohito; Nordlund, Dennis a Nilsson, Anders; /SLAC, SSRL

    2005-09-30

    The microscopic understanding of reactions at surfaces requires an in-depth knowledge of the dynamics of elementary processes on an ultrafast timescale. This can be accomplished using an ultrafast excitation to initiate a chemical reaction and then probe the progression of the reaction with an ultrashort x-ray pulse from the FEL. There is a great potential to use atom-specific spectroscopy involving core levels to probe the chemical nature, structure and bonding of species on surfaces. The ultrashort electron pulse obtained in the linear accelerator to feed the X-ray FEL can also be used for generation of coherent synchrotron radiation in the low energy THz regime to be used as a pump. This radiation has an energy close to the thermal excitations of low-energy vibrational modes of molecules on surfaces and phonons in substrates. The coherent THz radiation will be an electric field pulse with a certain direction that can collectively manipulate atoms or molecules on surfaces. In this respect a chemical reaction can be initiated by collective atomic motion along a specific reaction coordinate. If the coherent THz radiation is generated from the same source as the X-ray FEL radiation, full-time synchronization for pump-probe experiments will be possible. The combination of THz and X-ray spectroscopy could be a unique opportunity for FEL facilities to conduct ultrafast chemistry studies at surfaces.

  13. Dispersion relations for 1D high-gain FELs

    Energy Technology Data Exchange (ETDEWEB)

    Webb, S.D.; Litvinenko, V.N.

    2010-08-23

    We present analytical results for the one-dimensional dispersion relation for high-gain FELs. Using kappa-n distributions, we obtain analytical relations between the dispersion relations for various order kappa distributions. Since an exact solution exists for the kappa-1 (Lorentzian) distribution, this provides some insight into the number of modes on the way to the Gaussian distribution.

  14. Double-Undulator Fel for Governing by the Harmonics Generation

    NARCIS (Netherlands)

    Tulupov, A. V.

    1993-01-01

    Generation of harmonics in the double-undulator FEL based on the additional cyclotron resonance is considered. It is shown that efficient control of harmonics generation is feasible. Only one selected harmonic is generated while the others are suppressed. This effect takes place under a small value

  15. Compact THz FELs and Their Potential in Biological Applications

    CERN Document Server

    Gallerano, G P; Giovenale, E; Messina, G; Spassovsky, I P

    2005-01-01

    Two THz FEL sources are available at ENEA-Frascati covering the spectral range from 90 GHz to 0.7 THz. The first source, the ENEA Compact FEL, is based on a 5 MeV Microtron providing 4 A of peak current in 13 ps bunches. Peak power in excess of 3kW is obtained at 130 GHz. When the beam is focused, a peak E-field greater than 2 kV/cm can be obtained in the micropulse. The second source, FEL-CATS, is based on a 2.5 MeV RF Linac. After the Linac electrons enter a RF device that correlates their distribution in energy and phase. As a result a strong coherent spontaneous emission occurs in the undulator. Power up to several kW has been measured in the macropulse. The absence of a resonator results in a broad band emission from 0.4 to 0.7 THz. The peculiar temporal structure of the emitted radiation allows the investigation of the effects of high peak power, while maintaining a low average power incident on the sample. A variety of biological systems have been studied with the ENEA Compact FEL in the frame of the E...

  16. Developing a research skill set.

    Science.gov (United States)

    You, Y Nancy; Bednarski, Brian

    2014-06-01

    The recent decades have witnessed a significant expansion in the diversity of career paths within academic surgery. Although the skills for providing exemplary surgical care and for maintaining a strong work ethic are the foundations of an academic surgeon, deliberate career planning and organized acquisition of research skills contribute to the success of an academic career. In this article, we identify a set of core academic skills and propose a framework for acquiring them. We also describe specific career paths within academic surgery and provide an overview of the opportunities for acquiring specific skill sets. The development of an academic career is challenging, and firm knowledge of the personal motivations will sustain and endure the time needed for acquiring the needed skills.

  17. New autocorrelation technique for the IR FEL optical pulse width measurements

    Energy Technology Data Exchange (ETDEWEB)

    Amirmadhi, F.; Brau, K.A.; Becker, C. [Vanderbilt Univ., Nashville, TN (United States)] [and others

    1995-12-31

    We have developed a new technique for the autocorrelation measurement of optical pulse width at the Vanderbilt University FEL center. This method is based on nonlinear absorption and transmission characteristics of semiconductors such as Ge, Te and InAs suitable for the wavelength range from 2 to over 6 microns. This approach, aside being simple and low cost, removes the phase matching condition that is generally required for the standard frequency doubling technique and covers a greater wavelength range per nonlinear material. In this paper we will describe the apparatus, explain the principal mechanism involved and compare data which have been acquired with both frequency doubling and two-photon absorption.

  18. Calibration status and plans for the charge integrating JUNGFRAU pixel detector for SwissFEL

    Science.gov (United States)

    Redford, S.; Bergamaschi, A.; Brückner, M.; Cartier, S.; Dinapoli, R.; Ekinci, Y.; Fröjdh, E.; Greiffenberg, D.; Mayilyan, D.; Mezza, D.; Mozzanica, A.; Rajeev, R.; Ramilli, M.; Ruder, C.; Schädler, L.; Schmitt, B.; Shi, X.; Thattil, D.; Tinti, G.; Zhang, J.

    2016-11-01

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector under development for photon science applications at free electron laser and synchrotron facilities. In particular, JUNGFRAU detectors will equip the Aramis end stations of SwissFEL, an X-ray free electron laser currently under construction at the Paul Scherrer Institut in Villigen, Switzerland. JUNGFRAU has been designed specifically to meet the challenges of photon science at XFELs, including high frame rates, single photon sensitivity in combination with a high dynamic range, vacuum compatibility and tilable modules. This has resulted in a charge integrating detector with three dynamically adjusting gains, a low noise of 55 ENC RMS, readout speeds in excess of 2 kHz, single photon sensitivity down to 2 keV (with a signal to noise ratio of 10) and a dynamic range covering four orders of magnitude at 12 keV. Each JUNGFRAU module consists of eight chips of 256 × 256 pixels, each 75 × 75 μm2 in size. The chips are arranged in 2 × 4 formation and bump-bonded to a single silicon sensor 320 μm thick, resulting in an active area of approximately 4 × 8 cm2 per module. Multi-module vacuum compatible systems comprising up to 16 Mpixels (32 modules) will be used at SwissFEL. The design of SwissFEL and the JUNGFRAU system for the Aramis end station A will be introduced, together with results from early prototypes and a characterisation using the first batch of final JUNGFRAU modules. Plans and first results of the pixel-by-pixel calibration will also be shown. The vacuum compatibility of the JUNGFRAU module is demonstrated for the first time.

  19. Historical development of origins research.

    Science.gov (United States)

    Lazcano, Antonio

    2010-11-01

    Following the publication of the Origin of Species in 1859, many naturalists adopted the idea that living organisms were the historical outcome of gradual transformation of lifeless matter. These views soon merged with the developments of biochemistry and cell biology and led to proposals in which the origin of protoplasm was equated with the origin of life. The heterotrophic origin of life proposed by Oparin and Haldane in the 1920s was part of this tradition, which Oparin enriched by transforming the discussion of the emergence of the first cells into a workable multidisciplinary research program. On the other hand, the scientific trend toward understanding biological phenomena at the molecular level led authors like Troland, Muller, and others to propose that single molecules or viruses represented primordial living systems. The contrast between these opposing views on the origin of life represents not only contrasting views of the nature of life itself, but also major ideological discussions that reached a surprising intensity in the years following Stanley Miller's seminal result which showed the ease with which organic compounds of biochemical significance could be synthesized under putative primitive conditions. In fact, during the years following the Miller experiment, attempts to understand the origin of life were strongly influenced by research on DNA replication and protein biosynthesis, and, in socio-political terms, by the atmosphere created by Cold War tensions. The catalytic versatility of RNA molecules clearly merits a critical reappraisal of Muller's viewpoint. However, the discovery of ribozymes does not imply that autocatalytic nucleic acid molecules ready to be used as primordial genes were floating in the primitive oceans, or that the RNA world emerged completely assembled from simple precursors present in the prebiotic soup. The evidence supporting the presence of a wide range of organic molecules on the primitive Earth, including membrane

  20. Computations of longitudinal electron dynamics in the recirculating cw RF accelerator-recuperator for the high average power FEL

    Science.gov (United States)

    Sokolov, A. S.; Vinokurov, N. A.

    1994-03-01

    The use of optimal longitudinal phase-energy motion conditions for bunched electrons in a recirculating RF accelerator gives the possibility to increase the final electron peak current and, correspondingly, the FEL gain. The computer code RECFEL, developed for simulations of the longitudinal compression of electron bunches with high average current, essentially loading the cw RF cavities of the recirculator-recuperator, is briefly described and illustrated by some computational results.

  1. Institutional research and development, FY 1987

    Energy Technology Data Exchange (ETDEWEB)

    Struble, G.L.; Lawler, G.M.; Crawford, R.B.; Kirvel, R.D.; Peck, T.M.; Prono, J.K.; Strack, B.S. (eds.)

    1987-01-01

    The Institutional Research and Development program at Lawrence Livermore National Laboratory fosters exploratory work to advance science and technology, disciplinary research to develop innovative solutions to problems in various scientific fields, and long-term interdisciplinary research in support of defense and energy missions. This annual report describes research funded under this program for FY87. (DWL)

  2. FAST: a three-dimensional time-dependent FEL simulation code

    CERN Document Server

    Saldin, E L; Yurkov, M V

    1999-01-01

    In this report we briefly describe the three-dimensional, time-dependent FEL simulation code FAST. The equations of motion of the particles and Maxwell's equations are solved simultaneously taking into account the slippage effect. Radiation fields are calculated using an integral solution of Maxwell's equations. A special technique has been developed for fast calculations of the radiation field, drastically reducing the required CPU time. As a result, the developed code allows one to use a personal computer for time-dependent simulations. The code allows one to simulate the radiation from the electron bunch of any transverse and longitudinal bunch shape; to simulate simultaneously an external seed with superimposed noise in the electron beam; to take into account energy spread in the electron beam and the space charge fields; and to simulate a high-gain, high-efficiency FEL amplifier with a tapered undulator. It is important to note that there are no significant memory limitations in the developed code and an...

  3. Development of a far infrared free electron laser based on compact microtron

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Min; Lee, Byung Cheol; Kim, Sun Kook; Jeong, Young Uk; Cho, Sung Oh

    1998-11-01

    As a result of the cooperative research between KAERI and BINP, a FIR FEL having tunable range of output wavelength from 30 {mu}m to 50 {mu}m. The peak power is 10kW at maximum. The micropulse width is 10 ps and the macropulse width is 5 {mu}s. The repetition rate of micropulses is 2.8 GHz and that of macropulses is 1 - 10 Hz. In addition to the FIR FEL system, many key technologies of high power FELs have been developed. Among them are there electron accelerator technology, design and optimization of electron beamline, design of undulator, measurement of magnetic field of undulators, high-voltage technology, optical cavity, etc.. (author). 10 refs., 11 tabs., 48figs.

  4. Federal Research and Development Funding: FY2017

    Science.gov (United States)

    2017-01-27

    the spectrum auction proceeds in FY2015 to help industry and public safety organizations conduct research and develop new standards, technologies...Detection Office (DNDO) DNDO is the DHS organization responsible for nuclear detection research, development , testing, evaluation, acquisition, and...Federal Research and Development Funding: FY2017 John F. Sargent Jr., Coordinator Specialist in Science and Technology Policy Robert Esworthy

  5. DEVELOPING SOFTWARE FOR CORPUS RESEARCH

    Directory of Open Access Journals (Sweden)

    Oliver Mason

    2008-06-01

    Full Text Available Despite the central role of the computer in corpus research, programming is generally not seen as a core skill within corpus linguistics. As a consequence, limitations in software for text and corpus analysis slow down the progress of research while analysts often have to rely on third party software or even manual data analysis if no suitable software is available. Apart from software itself, data formats are also of great importance for text processing. But again, many practitioners are not very aware of the options available to them, and thus idiosyncratic text formats often make sharing of resources difficult if not impossible. This article discusses some issues relating to both data and processing which should aid researchers to become more aware of the choices available to them when it comes to using computers in linguistic research. It also describes an easy way towards automating some common text processing tasks that can easily be acquired without knowledge of actual computer programming.

  6. The Infrared Undulator Project at the VUV-FEL

    CERN Document Server

    Grimm, O; Rossbach, J; Saldin, E L; Schneidmiller, E; Yurkov, M V

    2005-01-01

    A special electromagnetic wiggler generating infrared radiation in the range 1-200 microns is planned to be installed at the DESY VUV-FEL in Hamburg by autumn 2006. The device is located after the FEL undulators, using the spent electron beam. The purpose is two-fold: first, it will serve longitudinal electron beam diagnostics, similar to other methods currently investigated using the coherent emission of radiation at wavelengths similar to the bunch length, and second it will be used as a powerful (100 MW peak) source for short (few ps) infrared radiation pulses. The natural, perfect synchronization with the VUV pulses will allow for pump-probe experiments with high timing precision. This paper will give an overview of the project, including the infrared beam transport line.

  7. The formation of transverse coherence in SASE FELs

    CERN Document Server

    Saldin, E L; Yurkov, M V

    1999-01-01

    This report presents a fully three-dimensional study of the amplification process in the self amplified spontaneous emission (SASE) free electron laser. Investigations are based on the data obtained with the three-dimensional, time-dependent FEL simulation code FAST. Analysis of the data shows that the statistical properties of the radiation can be described with Gaussian statistics. In particular, fluctuations of the instantaneous radiation intensity at one space point follow the negative exponential law, while the finite-time integrals of the radiation intensity (both in space and in time) follow a gamma-distribution. Numerical examples presented in the paper correspond to the 70 nm SASE FEL under construction at the TESLA test facility at DESY.

  8. Ultrafast Coherent Control and Characterization of Surface Reactions using FELs

    CERN Document Server

    Ogasawara, Hirohito; Nordlund, Dennis

    2005-01-01

    The microscopic understanding of surface chemistry requires a detailed understanding of the dynamics of elementary processes at surfaces. The ultrashort electron pulse obtained in the linear accelerator to feed the FEL can be used for generation of coherent synchrotron radiation in the low energy THz regime. With the current parameters for LCLS this corresponds to radiation with energy corresponding to excitations of low-energy vibrational modes of molecules on surfaces or phonons in substrates. The coherent radiation can coherently manipulate atoms or molecules on surfaces. In this respect a chemical reaction can be initiated by coherent atomic motion along a specific reaction coordinate. Since the THz radiation is generated from the same source as the FEL radiation full-time synchronization for pump-probe experiments will be possible. The possibility to perform time-resolved X-ray Emission Spectroscopy (XES) and X-ray Photoelectron Spectroscopy (XPS) measurements as a probe of chemical dynamics is an exciti...

  9. Feedback Control Of Dynamical Instabilities In Classical Lasers And Fels

    CERN Document Server

    Bielawski, S; Szwaj, C

    2005-01-01

    Dynamical instabilities lead to unwanted full-scale power oscillations in many classical lasers and FEL oscillators. For a long time, applications requiring stable operation were typically performed by working outside the problematic parameter regions. A breakthrough occurred in the nineties [1], when emphasis was made on the practical importance of unstable states (stationary or periodic) that coexist with unwanted oscillatory states. Indeed, although not observable in usual experiments, unstable states can be stabilized, using a feedback control involving arbitrarily small perturbations of a parameter. This observation stimulated a set of works leading to successful suppression of dynamical instabilities (initially chaos) in lasers, sometimes with surprisingly simple feedback devices [2]. We will review a set of key results, including in particular the recent works on the stabilization of mode-locked lasers, and of the super-ACO, ELETTRA and UVSOR FELs [3].

  10. First lasing of the IR upgrade FEL at Jefferson lab

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Behre; Stephen Benson; George Biallas; James Boyce; Christopher Curtis; David Douglas; H. Dylla; L. Dillon-townes; Richard Evans; Albert Grippo; Joseph Gubeli; David Hardy; John Heckman; Carlos Hernandez-Garcia; Tommy Hiatt; Kevin Jordan; Nikolitsa Merminga; George Neil; Joseph Preble; Harvey Rutt; Michelle D. Shinn; Timothy Siggins; Hiroyuki Toyokawa; David W. Waldman; Richard Walker; Neil Wilson; Byung Yunn; Shukui Zhang

    2004-08-01

    We report initial lasing results from the IR Upgrade FEL at Jefferson Lab[1]. The electron accelerator was operated with low average current beam at 80 MeV. The time structure of the beam was 120 pC bunches at 4.678 MHz with up to 750 {micro}sec pulses at 2Hz. Lasing was established over the entire wavelength range of the mirrors (5.5-6.6 {micro}m). The detuning curve length, turn-on time, and power were in agreement with modeling results assuming a 1 psec FWHM micropulse. The same model predicts over 10 kW of power output with 10 mA of beam and 10% output coupling, which is the ultimate design goal of the IR Upgrade FEL. The behavior of the laser while the dispersion section strength was varied was found to qualitatively match predictions. Initial CW lasing results also will be presented.

  11. Terahertz IFEL/FEL Microbunching for Plasma Beatwave Accelerators

    CERN Document Server

    Sung, Chieh; Joshi, Chandrashekhar; Musumeci, Pietro; Pellegrini, Claudio; Ralph, Joseph; Reiche, Sven; Rosenzweig, James E; Tochitsky, Sergei Ya

    2005-01-01

    In order to obtain monoenergetic acceleration of electrons, phase-locked injection using electron microbunches shorter than the accelerating structure is necessary. For a laser-driven plasma beatwave accelerator experiment, we propose to microbunch the electrons by interaction with terahertz (THz) radiation in an undulator via two mechanisms– free electron laser (FEL) and inverse free electron laser (IFEL). Since the high power FIR radiation will be generated via difference frequency mixing in GaAs by the same CO2 beatwave used to drive the plasma wave, electrons could be phase-locked and pre-bunched into a series of microbunches separated with the same periodicity. Here we examine the criteria for undulator design and present simulation results for both IFEL and FEL approaches. Using different CO2 laser lines, electrons can be microbunched with different periodicity 300 – 100 mm suitable for injection into plasma densities in the range 1016 – 1017 cm-3, respectively. The requiremen...

  12. Cavity-mirror degradation in the deep-UV FEL

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, K.; Yamazaki, T.; Sei, N. [Electrotechnical Lab., Ibaraki (Japan)] [and others

    1995-12-31

    It is known that the degradation of dielectric multilayer mirrors used in short wavelength free-electron lasers (FELs) is caused by the carbon contamination on the mirror surface and the defects inside the dielectrics. We reported last year that the degraded dielectric multilayer mirrors can be repaired with both surface treatment by RF-induced oxygen plasma and thermal annealing. However, such a mirror degradation is still one of the most critical issues in the deep ultraviolet (UV) FELs, because the fundamental undulator radiation resonating in the laser cavity, the intensity of which is much higher than that of higher harmonics, can be sufficiently energetic to cause the mirror degradation through photochemical reactions. We are investigating the mirror degradation mainly in the deep UV region down to 240 nm. The experimental results will be shown. The mirror degradation mechanism will be discussed.

  13. A wiggler magnet for FEL low voltage operation

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shamma`a, A.; Stuart, R.A.; Lucas, J.

    1995-12-31

    In low voltage FELs (ie, 200kV), operation is necessarily in the microwave frequency range for wiggler periods of the order of cms., so that a waveguide system is mandatory. Also, because of the relatively low velocity of the electron beam, the wiggle amplitude of the electron beam can be much larger than is normal for highly relativistic FELs. Both these factors mean that the electron trajectory must be carefully controlled to avoid beam collision with the waveguide walls. A wiggler system with half poles at entrance and exit is not an acceptable solution because of the offset is gives rise to the electron trajectory. Consequently, we have designed and constructed a wiggler magnet with exponential entrance and exit tapers for a minimal deflection and displacement of the electron beam. Simulations and experimental measurements showed that an on axis trajectory is easily obtainable.

  14. Possible enhancement of SASE FEL output field intensity induced by local phase jump

    Science.gov (United States)

    Varfolomeev, A. A.; Yarovoi, T. V.; Bousine, P. V.

    1998-02-01

    A possible influence on the FEL dynamics of a locally induced phase jump between the FEL radiation and electron beam is considered. A numerical study has been made for the SASE mode FEL supposing that the phase jumps are introduced at different depths inside the undulator. The FEL evolution starting from a small input signal was studied in 1D high gain approach. It was shown that the FEL radiation output is sensitive to the phase jump value if it is introduced at the depth where saturation of output power takes places. In the steady state regime, the phase displacement of order ˜π provides enhancement of the peak output power up to 50%. Some kind of optical tapering is also possible giving further FEL efficiency enhancement.

  15. Present and next steps of the JAERI superconducting rf linac based FEL program

    Energy Technology Data Exchange (ETDEWEB)

    Minehara, E.J.; Yamauchi, T.; Sugimoto, M. [FEL Laboratory at Tokai, Advanced Photon Research Center, Kansai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (JP)] (and others)

    2000-03-01

    The JAERI superconducting rf linac based FEL has successfully been lased to produce a 0.3 kW FEL light and 100 kW or larger electron beam output in quasi continuous wave operation in 1999. The 1 kW class output as our present program goal will be achieved to improve the optical out coupling method in the FEL optical resonator, the electron gun, and the electron beam optics in the JAERI FEL driver. As our next 5 year program goal is the 100 kW class FEL light and a few tens MW class electron beam output in average, quasi continuous wave operation of the light and electron beam will be planned in the JAERI superconducting rf linac based FEL facility. Conceptual design options needed for such a very high power operation and shorter wavelength light sources will be discussed to improve and to upgrade the exciting facility. (author)

  16. Macro-particle FEL model with self-consistent spontaneous radiation

    CERN Document Server

    Litvinenko, Vladimir N

    2015-01-01

    Spontaneous radiation plays an important role in SASE FELs and storage ring FELs operating in giant pulse mode. It defines the correlation function of the FEL radiation as well as its many spectral features. Simulations of these systems using randomly distributed macro-particles with charge much higher that of a single electron create the problem of anomalously strong spontaneous radiation, limiting the capabilities of many FEL codes. In this paper we present a self-consistent macro-particle model which provided statistically exact simulation of multi-mode, multi-harmonic and multi-frequency short-wavelength 3-D FELs including the high power and saturation effects. The use of macro-particle clones allows both spontaneous and induced radiation to be treated in the same fashion. Simulations using this model do not require a seed and provide complete temporal and spatial structure of the FEL optical field.

  17. An advanced UV optical cavity for the European FEL project

    CERN Document Server

    Poole, M W; Chesworth, A A; Clarke, J A; Fell, B; Hill, C; Marl, R; Mullacrane, I D; Reid, R J

    2000-01-01

    A European collaboration is constructing a short wavelength FEL for the ELETTRA storage ring. The optical cavity has been designed and constructed at Daresbury Laboratory for delivery to Sincrotrone Trieste in Autumn 1999, following commissioning tests over the Summer. Initial FEL operation will be at 350 nm but subsequently down to 200 nm or less and mirrors will be 40 mm diameter. The 32 m optical cavity is controllable to 0.01 mu rad in mirror pitch and yaw using digital piezo translators. A novel feature is the simultaneous presence of three remotely interchangeable mirrors to extend the tuning range and also to interchange damaged mirrors immediately. In addition, a transfer arm and load-lock arrangement will permit a mirror to be withdrawn from the chamber and replaced without disruption to the UHV system. The FEL is designed to operate at high power (1-10 W) and multi-watt spontaneous emission is also present: power loading has been investigated by FEA analysis and has necessitated specification of a w...

  18. Electron bunch length measurement at the Vanderbilt FEL

    Energy Technology Data Exchange (ETDEWEB)

    Amirmadhi, F.; Brau, C.A.; Mendenhall, M. [Vanderbilt Free-Electron-Laser Center, Nashville, TN (United States)] [and others

    1995-12-31

    During the past few years, a number of experiments have been performed to demonstrate the possibility to extract the longitudinal charge distribution from spectroscopic measurements of the coherent far-infrared radiation emitted as transition radiation or synchrotron radiation. Coherent emission occurs in a spectral region where the wavelength is comparable to or longer than the bunch length, leading to an enhancement of the radiation intensity that is on the order of the number of particles per bunch, as compared to incoherent radiation. This technique is particularly useful in the region of mm and sub-mm bunch lengths, a range where streak-cameras cannot be used for beam diagnostics due to their limited time resolution. Here we report on experiments that go beyond the proof of principle of this technique by applying it to the study and optimization of FEL performance. We investigated the longitudinal bunch length of the Vanderbilt FEL by analyzing the spectrum of coherent transition radiation emitted by the electron bunches. By monitoring the bunch length while applying a bunch-compression technique, the amount of the compression could be easily observed. This enabled us to perform a systematic study of the FEL performance, especially gain and optical pulse width, as a function of the longitudinal electron distribution in the bunch. The results of this study will be presented and discussed.

  19. Advanced research reactor fuel development

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Kyu; Pak, H. D.; Kim, K. H. [and others

    2000-05-01

    The fabrication technology of the U{sub 3}Si fuel dispersed in aluminum for the localization of HANARO driver fuel has been launches. The increase of production yield of LEU metal, the establishment of measurement method of homogeneity, and electron beam welding process were performed. Irradiation test under normal operation condition, had been carried out and any clues of the fuel assembly breakdown was not detected. The 2nd test fuel assembly has been irradiated at HANARO reactor since 17th June 1999. The quality assurance system has been re-established and the eddy current test technique has been developed. The irradiation test for U{sub 3}Si{sub 2} dispersed fuels at HANARO reactor has been carried out in order to compare the in-pile performance of between the two types of U{sub 3}Si{sub 2} fuels, prepared by both the atomization and comminution processes. KAERI has also conducted all safety-related works such as the design and the fabrication of irradiation rig, the analysis of irradiation behavior, thermal hydraulic characteristics, stress analysis for irradiation rig, and thermal analysis fuel plate, for the mini-plate prepared by international research cooperation being irradiated safely at HANARO. Pressure drop test, vibration test and endurance test were performed. The characterization on powders of U-(5.4 {approx} 10 wt%) Mo alloy depending on Mo content prepared by rotating disk centrifugal atomization process was carried out in order to investigate the phase stability of the atomized U-Mo alloy system. The {gamma}-U phase stability and the thermal compatibility of atomized U-16at.%Mo and U-14at.%Mo-2at.%X(: Ru, Os) dispersion fuel meats at an elevated temperature have been investigated. The volume increases of U-Mo compatibility specimens were almost the same as or smaller than those of U{sub 3}Si{sub 2}. However the atomized alloy fuel exhibited a better irradiation performance than the comminuted alloy. The RERTR-3 irradiation test of nano

  20. Research and Development from the bottom up

    DEFF Research Database (Denmark)

    Brem, Alexander; Wolfram, P.

    2014-01-01

    and ecological context or the growing interest of developed market firms in approaches from emerging markets. Hence, the presented framework supports further research in new paradigms for research and development (R&D) in developed market firms (DMFs), particularly in relation to emerging markets. This framework...... enables scholars to compare concepts from developed and emerging markets, to address studies specifically by using consistent terms, and to advance research into the concepts according their characterization....

  1. 2010-11 Research Portfolio: Research & Development Division

    Science.gov (United States)

    Educational Testing Service, 2010

    2010-01-01

    This document describes the breadth of the research that the ETS (Educational Testing Service) Research & Development division is conducting in 2010. This portfolio will be updated in early 2011 to reflect changes to existing projects and new projects that were added after this document was completed. The research described in this portfolio falls…

  2. Analysis and comparison between electric and magnetic power couplers for accelerators in Free Electron Lasers (FEL)

    Science.gov (United States)

    Serpico, C.; Grudiev, A.; Vescovo, R.

    2016-10-01

    Free-electron lasers represent a new and exciting class of coherent optical sources possessing broad wavelength tunability and excellent optical-beam quality. The FERMI seeded free-electron laser (FEL), located at the Elettra laboratory in Trieste, is driven by a 200 m long, S-band linac: the high energy part of the linac is equipped with 6 m long backward traveling wave (BTW) structures. The structures have small iris radius and a nose cone geometry which allows for high gradient operation. Development of new high-gradient, S-band accelerating structures for the replacement of the existing BTWs is under consideration. This paper investigates two possible solutions for the RF power couplers suitable for a linac driven FEL which require reduced wakefields effects, high operating gradient and very high reliability. The first part of the manuscript focuses on the reduction of residual field asymmetries, while in the second analyzes RF performances, the peak surface fields and the expected breakdown rate. In the conclusion, two solutions are compared and pros and cons are highlighted.

  3. Application of the green function formalism to nonlinear evolution of the low gain FEL oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Shvets, G. [Princeton Plasma Physics Lab., NJ (United States); Wurtele, J.S.; Gardent, D. [Massachusetts Institute of Technology, Cambridge, MA (United States)] [and others

    1995-12-31

    A matrix formalism for the optical pulse evolution in the frequency domain, is applied to the nonlinear regime of operation. The formalism was previously developed for studies of the linear evolution of the low-gain FEL oscillator with an arbitrary shape of the electron beam. By varying experimentally controllable parameters, such as cavity detunning and cavity losses, different regimes of operation of the FEL oscillator, such as a steady state saturation and limit cycle saturation, are studied numerically. It is demonstrated that the linear supermodes, numerically obtained from the matrix formalism, provide an appropriate framework for analyzing the periodic change in the output power in the limit cycle regime. The frequency of this oscillation is related to the frequencies of the lowest-order linear supermodes. The response of the output radiation to periodic variation of the electron energy is studied. It is found that the response is enhanced when the frequency of the energy variation corresponds to the difference of per-pass phase advances of the lowest linear supermodes. Finally, various nonlinear models are tested to capture the steady state saturation and limit cycle variation of the EM field in the oscillator cavity.

  4. Comments on advanced, time-resolved imaging techniques for free-electron laser (FEL) experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.

    1992-01-01

    An extensive set of time-resolved imaging experiments has been performed on rf-linac driven free-electron lasers (FELs) over the past few years. These experiments have addressed both micropulse and macropulse timescales on both the charged-particle beam and the wiggler/undulator outputs (spontaneous emission and lasing). A brief review of first measurements on photoinjecter micropulse elongation, submacropulse phase slew in drive lasers, submacropulse wavelength shifts in lasers, etc. is presented. This is followed by discussions of new measurements of 35-MeV electron beam micropulse bunch length (<10 ps) using optical transition radiation, some of the first single bend synchrotron radiation beam profile measurements at gamma <80, and comments on the low-jitter synchroscan streak camera tuner. These techniques will be further developed on the 200-650 MeV linac test stand at the Advanced Photon Source (APS) in the next few years. Such techniques should be adaptable to many of the present FEL designs and to some aspects of the next generation of light sources.

  5. Comments on advanced, time-resolved imaging techniques for free-electron laser (FEL) experiments

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.

    1992-11-01

    An extensive set of time-resolved imaging experiments has been performed on rf-linac driven free-electron lasers (FELs) over the past few years. These experiments have addressed both micropulse and macropulse timescales on both the charged-particle beam and the wiggler/undulator outputs (spontaneous emission and lasing). A brief review of first measurements on photoinjecter micropulse elongation, submacropulse phase slew in drive lasers, submacropulse wavelength shifts in lasers, etc. is presented. This is followed by discussions of new measurements of 35-MeV electron beam micropulse bunch length (<10 ps) using optical transition radiation, some of the first single bend synchrotron radiation beam profile measurements at gamma <80, and comments on the low-jitter synchroscan streak camera tuner. These techniques will be further developed on the 200-650 MeV linac test stand at the Advanced Photon Source (APS) in the next few years. Such techniques should be adaptable to many of the present FEL designs and to some aspects of the next generation of light sources.

  6. Research Skills Development in Higher Education Students

    Science.gov (United States)

    Bergamini, Tiziana Priede; Navarro, Cristina Lopez-Cozar

    2014-01-01

    This case study presents the development of a research project in a third-year undergraduate course, Family Business Administration. The research project aimed at promoting research skills in students. The authors formed working groups of no more than six students, and each group had to select an original research topic after conducting a…

  7. Teacher Professional Development Approach:Action Research

    Institute of Scientific and Technical Information of China (English)

    LIU Yang

    2013-01-01

    Theory and practice, researchers and practitioners are usually isolated in traditional education research, so much so that the research results can not solve the problems that teachers encounter in their teaching practice. As a new mode, action research provides a bridge linking theory and teaching practice as well as a way to promote teacher development.

  8. Biosensing International Research and Development

    CERN Document Server

    Schultz, Jerome; Mrksich, Milan

    2006-01-01

    The goal of this book is to disseminate information on the worldwide status and trends in biosensing R&D to government decisionmakers and the research community. The contributors critically analyze and compare biosensing research in the United States with that being pursued in Japan, Europe and other major industrialized countries. Biosensing includes systems that incorporate a variety of means, including electrical, electronic, and photonic devices; biological materials (e.g., tissue, enzymes, nucleic acids, etc.); and chemical analysis to produce detectable signals for the monitoring or identification of biological phenomena. In a broader sense, the study of biosensing includes any approach to detection of biological elements and the associated software or computer identification technologies (e.g., imaging) that identify biological characteristics. Biosensing is finding a growing number of applications in a wide variety of areas, including biomedicine, food production and processing, and detection of b...

  9. Developing a Research Skill Set

    OpenAIRE

    You, Y. Nancy; Bednarski, Brian

    2014-01-01

    The recent decades have witnessed a significant expansion in the diversity of career paths within academic surgery. Although the skills for providing exemplary surgical care and for maintaining a strong work ethic are the foundations of an academic surgeon, deliberate career planning and organized acquisition of research skills contribute to the success of an academic career. In this article, we identify a set of core academic skills and propose a framework for acquiring them. We also describ...

  10. [DEVELOPMENT RESEARCH OF BIOLOGICAL DRESSING].

    Science.gov (United States)

    Zhang, Jinfeng; Hao, Jianbo; Zhang, Jinpeng; Luo, Bo; Liu, Peng

    2015-02-01

    To review the research progress of modern biological dressings. The related literature at home and abroad was reviewed, analyzed, and summarized in the progress of biological dressing situation and various types of biological dressing research. Compared with the traditional dressing, the biological dressing can greatly promote wound healing. Biological dressings are mainly divided into the natural materials, artificial synthetic materials, and drug loaded dressings. The natural material dressings are mainly the alginate dressing, this kind of dressing can promote wound healing, which has been confirmed by a large number of studies. The artificial synthetic materials include film dressings, liquid, water colloids, gels, and foam, each has its own advantages and disadvantages, which can be chosen according to need. The drug dressing can play the role of drug loading, and further promote the wound healing; using microcapsule technology to construct the dressing and choosing Chinese medicine as drugs is the research direction of load. The experiment and clinical application of biological dressing are many types, clinical application prospect is wide, but each has its own advantages and disadvantages, further study is needed to improve its efficacy.

  11. Efek Relaksasi Ekstrak Etanol Daun Pugun Tanoh (Curanga fel-terrae (Lour.) Merr.) Terhadap Kontraksi Otot Polos Ileum Marmut (Cavia porcellus) Terisolasi Secara In Vitro

    OpenAIRE

    Michi, Anddora

    2015-01-01

    Pugun Tanoh (Curanga fel-terrae (Lour.) Merr.) is a plant of Scropulariaceae family which is often used by the native people of Tiga Lingga village in Dairi Regency, North Sumatera Province, Indonesia to cure diarrhea and stomachache. This research aims to observe the relaxation effect of Pugun Tanoh leaf ethanol extract on the contraction of isolated guinea pig’s ileum by acetylcholine. This research was conducted using in vitro. The parameter measured in this research is the contract...

  12. Research and Development Information System (RDIS)

    Data.gov (United States)

    Department of Veterans Affairs — The Research and Development Information System (RDIS) is the Veterans Affairs Central Office budgetary and project data repository for managing the VA Research and...

  13. Development of Space Environment Research in China

    Institute of Scientific and Technical Information of China (English)

    GONG Jiancun; XUE Bingsen; HUANG Jianguo; SHI Liqin

    2006-01-01

    Abstract This paper presents the recent research progress on space environment in China. The space environment here includes space environment models, forecast methodology and space environment effects on spacecrafts. Finally the development trends of China's space environment research are discussed.

  14. Recent developments in photorespiration research.

    Science.gov (United States)

    Bauwe, Hermann

    2010-04-01

    Photorespiration is the light-dependent release of CO(2) initiated by Rubisco (ribulose-1,5-bisphosphate carboxylase/oxygenase) during oxygenic photosynthesis. It occurs during the biochemical reactions of the photorespiratory C(2) cycle, which is an ancillary metabolic process that allows photosynthesis to occur in oxygen-containing environments. Recent research has identified the genes for many plant photorespiratory enzymes, allowing precise functional analyses by reverse genetics. Similar studies with cyanobacteria disclosed the evolutionary origin of photorespiratory metabolism in these ancestors of plastids.

  15. Faculty development in medical education research.

    Science.gov (United States)

    LaMantia, Joseph; Hamstra, Stanley J; Martin, Daniel R; Searle, Nancy; Love, Jeffrey; Castaneda, Jill; Aziz-Bose, Rahela; Smith, Michael; Griswold-Therodorson, Sharon; Leuck, JoAnna

    2012-12-01

    This 2012 Academic Emergency Medicine consensus conference breakout session was devoted to the task of identifying the history and current state of faculty development in education research in emergency medicine (EM). The participants set a future agenda for successful faculty development in education research. A number of education research and content experts collaborated during the session. This article summarizes existing academic and medical literature, expert opinions, and audience consensus to report our agreement and findings related to the promotion of faculty development.

  16. Energy storage research and development

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    In 2007, US consumers experienced the highest sustained gasoline prices in recent history, in real terms, including those seen in the early 1980s1. Partially as a result of the $3/gallon gasoline prices, sales of hybrid electric vehicles (HEVs) increased almost 60% in 20072, and several automakers announced plans to develop plug-in hybrid electric vehicles (PHEVs)3. However, total sales of HEVs remained in the 2-3 percent range of all vehicle sales. An important step for continued HEV market penetration, as well as electrifying the nation's personal transportation, is the development of cost effective, long lasting, and abuse tolerant Li-ion batteries.

  17. Research on Negotiating Agent Development

    Institute of Scientific and Technical Information of China (English)

    WEI Ding-guo; PENG Hong

    2004-01-01

    The paper presents a flexible and effective method of development of negotiating agents.A strategy specification, which is specified by a state chart and defeasible rules, can be dynamically inserted into an agent shell incorporating a state chart interpreter and a defeasible logic inference engine, in order to yield a desirable agent.The set of desirable criteria and rules is required to be justified with different context of the application.

  18. R&D Requirements, RF Gun Mode Studies, FEL-2 Steady-StateStudies, Preliminary FEL-1 Time-Dependent Studies, and Preliminary LayoutOption Investigation

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, John; Corlett, John; Doolittle, Larry; Fawley, William; Lidia, Steven; Penn, Gregory; Ratti, Alex; Staples, John; Wilcox Russell; Wurtele, Jonathan; Zholents, Alexander

    2005-10-01

    This report constitutes the third deliverable of LBNLs contracted role in the FERMI {at} Elettra Technical Optimization study. It describes proposed R&D activities for the baseline design of the Technical Optimization Study, initial studies of the RF gun mode-coupling and potential effects on beam dynamics, steady-state studies of FEL-2 performance to 10 nm, preliminary studies of time-dependent FEL-1 performance using electron bunch distribution from the start-to-end studies, and a preliminary investigation of a configuration with FEL sinclined at a small angle from the line of the linac.

  19. [Research and development of artificial retina material].

    Science.gov (United States)

    Hu, Ning; Yang, Jun; Peng, Chenglin; Wang, Xing; Zhang, Sijie; Zhang, Ying; Zheng, Erxin

    2008-04-01

    The application of artificial retina was introduced. The principal characteristics of artificial retina material were reviewed in particular. Moreover, the recent research development and application prospect were discussed.

  20. Information Systems Development as a Research Method

    Directory of Open Access Journals (Sweden)

    Helen Hasan

    2003-11-01

    Full Text Available This paper takes the stance that some cases of information systems development can be considered knowledge creating activities, and, in those cases, information systems development can be a legitimate research method. In these cases not only is knowledge created about the development process itself but also a deeper understanding emerges about the organisational problem that the system is designed to solve. The paper begins with a brief overview of research in the design sciences and a comparison of research methods that are concerned with the design, and use, of information systems. This is followed by an assessment of the way systems development as a research method deals with the scientific research processes of data collection, analysis, synthesis and display. A case study, where the systems development research method was use, is described to illustrate the method and give the reader a better understanding of the approach.

  1. Codes & standards research, development & demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-07-22

    This Roadmap is a guide to the Research, Development & Demonstration activities that will provide data required for SDOs to develop performance-based codes and standards for a commercial hydrogen fueled transportation sector in the U.S.

  2. Research and Evaluation in Curriculum Development.

    Science.gov (United States)

    Vogel, Paul G.; Carmichael, Donald L.

    Research and evaluation are crucial elements of the curriculum development process. Educational research properly includes "basic- nonevaluative" and "applied-evaluative research." Each species should be judged relative to its purpose and the degree to which systematic investigation occurs through the application of the…

  3. IPMC microgripper research and development

    Energy Technology Data Exchange (ETDEWEB)

    Lumia, R [Department of Mechanical Engineering, University of New Mexico, MSC01-1150, Albuquerque, NM 87131 (United States); Shahinpoor, M [Department of Mechanical Engineering, University of Maine, Orono, Maine 04469 (United States)], E-mail: lumia@unm.edu, E-mail: mohsen.shahinpoor@umit.maine.edu

    2008-08-15

    Described are the state of the art on designing and developing a microgripper using ionic polymer metal composites (IPMCs), an electroactive material, as an actuator to grasp and manipulate micro-sized flexible and rigid objects and yet also serve as a sensor for position feedback control. IPMCs, as a material, are compliant and can work in both wet and dry environments. This makes it ideally suited for both industrial operations, e.g., building microsystems from MEMS components, as well as for a variety of bio-micromanipulation tasks, e.g., bacterium and cell handling. We derive a theoretical force model for the microgripper. The model estimates that an IPMC finger of dimensions 5mm x lmm x 0.2mm exerts a force of 85 {mu}N when grasping a solder ball of 15mg. We experimentally measure the load carrying capacity of the IPMC microgripper. Furthermore, we show empirically that the relationship between load carry capability and the length of microgripper fingers is linear. Experiments with three different microgripper finger shapes show that load carrying performance is related to the area of the finger rather than the shape. This implies that manufacturing ease favours microgrippers with tapered fingers. Finally, we show how flexible objects (hydrogel crystals in this case) are grasped with this IPMC microgripper.

  4. Future of federal research and development

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, D.T.

    1995-12-31

    This paper very briefly describes factors affecting federal funding for research and development. Historical, political, and economic aspects of funding are outlined. Projections of future funding is provided in general terms. The potential of the national laboratories for continued research and development contributions is described.

  5. European Youth Research: Development, Debates, Demands

    Science.gov (United States)

    Chisholm, Lynne

    2006-01-01

    This chapter presents the development of European youth research as a distinctive field of study. It draws attention to the sociopolitical context in which the field has emerged, outlines the key dimensions of the field's agenda, reports on significant facets of theory and research development to date, and briefly considers the field's…

  6. The Upgrade of the DUV-FEL Facility at the BNL

    CERN Document Server

    Wang, Xijie; Murphy, James; Rakowsky, George; Rose, James; Sheehy, Brian; Shen, Yuzhen; Skaritka, John; Wu, Zilu; Yu Li Hua

    2004-01-01

    The DUV-FEL at BNL, is the world's only facility dedicated to laser-seeded FEL R&D and its applications. The HGHG at the DUV-FEL reached saturation at 266 nm with 800 nm seeding [1] in 2002. Since then, the first chemical science experiment ? ion pair imaging, was successfully completed [2].The DUV-FEL linac is being upgraded from 200 to 300 MeV to enable the HGHG FEL to produce 100 μJ pulses of 100 nm light. This will establish the DUV FEL as a premier user facility for XUV radiation. The upgraded facility will also enable several critical R&Ds for a future X-ray FEL based on HGHG, such as cascaded HGHG and higher harmonic HGHG (n>5). The upgraded HGHG will operate at the 4th harmonic with the seed laser at 400nm. The increase of the electron beam energy will be accomplished by installing a 5th linac cavity and two 45 MW klystrons. New modulator and dispersion sections vacuum chambers will be manufactured to accommodate new matching optics and 8th harmonic HGHG. The status of the DUV-FEL upgra...

  7. Step-tapered operation of the FEL: Efficiency enhancement and two-colour operation

    NARCIS (Netherlands)

    Jaroszynski, D. A.; Prazeres, R.; Glotin, F.; Marcouille, O.; Ortega, J. M.; Oepts, D.; van der Meer, A. F. G.; Knippels, G.M.H.; van Amersfoort, P. W.

    1996-01-01

    We present measurements of the temporal and spectral properties of radiation produced from the step-tapered undulator infrared free-electron lasers (FELs), CLIO in France and FELIX in the Netherlands. Using a two section undulator with independently adjustable deflection parameters, K, the FEL will

  8. Coherent undulator radiation of electron beam, microbunched for the FEL power outcoupling

    Energy Technology Data Exchange (ETDEWEB)

    Kulipanov, G.N.; Sokolov, A.S.; Vinokurov, N.A. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)

    1995-12-31

    The spectral intensity of the coherent undulator radiation of electron beam, preliminarily microbunched by the FEL oscillator for the FEL power outcoupling, is approximately calculated by simple analytic considerations, taking into account the transverse emittances and the energy spread of the microbunched electron beams.

  9. Wavelength dependent delay in the onset of FEL tissue ablation

    Energy Technology Data Exchange (ETDEWEB)

    Tribble, J.A.; Edwards, G.S. [Vanderbilt Univ., Nashville, TN (United States); Lamb, J.A. [Massachusetts General Hospital, Boston, MA (United States)] [and others

    1995-12-31

    We are investigating the wavelength dependence of the onset of laser tissue ablation in the IR Visible and UV ranges. Toward this end, we have made simultaneous measurements of the ejected material (using a HeNe probe beam tangential to the front surface) and the residual stress transient in the tissue (using traditional piezoelectric detection behind the thin samples). For the IR studies we have used the Vanderbilt FEL and for the UV and Vis range we have used a Q-switched ND:Yag with frequency doubling and quadrupling. To satisfy the conditions of the near field limit for the detection of the stress transient, the duration of the IR FEL macropulse must be as short as possible. We have obtained macropulses as short as 100 ns using Pockels Cell technology. The recording of the signals from both the photodiode monitoring the HeNe probe beam and the acoustic detector are synchronized with the arrival of the 100 ns macropulse. With subablative intensities, the resulting stress transient is bipolar with its positive peak separated from its negative peak by 100 ns in agreement with theory. Of particular interest is the comparison of ablative results using 3 {mu}m and 6.45 {mu}m pulses. Both the stress transient and the ejection of material suffer a greater delay (with respect to the arrival of the 100 ns pulse) when the FEL is tuned to 3 {mu}m as compared to 6.45 {mu}m. A comparison of IR Vis and UV data will be discussed in terms of microscopic mechanisms governing the laser ablation process.

  10. Simulation of FEL pulse length calculation with THz streaking method

    Energy Technology Data Exchange (ETDEWEB)

    Gorgisyan, I., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Ischebeck, R.; Prat, E.; Reiche, S. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Rivkin, L. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Juranić, P., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland)

    2016-04-02

    Simulation of THz streaking of photoelectrons created by X-ray pulses from a free-electron laser and reconstruction of the free-electron laser pulse lengths. Having accurate and comprehensive photon diagnostics for the X-ray pulses delivered by free-electron laser (FEL) facilities is of utmost importance. Along with various parameters of the photon beam (such as photon energy, beam intensity, etc.), the pulse length measurements are particularly useful both for the machine operators to measure the beam parameters and monitor the stability of the machine performance, and for the users carrying out pump–probe experiments at such facilities to better understand their measurement results. One of the most promising pulse length measurement techniques used for photon diagnostics is the THz streak camera which is capable of simultaneously measuring the lengths of the photon pulses and their arrival times with respect to the pump laser. This work presents simulations of a THz streak camera performance. The simulation procedure utilizes FEL pulses with two different photon energies in hard and soft X-ray regions, respectively. It recreates the energy spectra of the photoelectrons produced by the photon pulses and streaks them by a single-cycle THz pulse. Following the pulse-retrieval procedure of the THz streak camera, the lengths were calculated from the streaked spectra. To validate the pulse length calculation procedure, the precision and the accuracy of the method were estimated for streaking configuration corresponding to previously performed experiments. The obtained results show that for the discussed setup the method is capable of measuring FEL pulses with about a femtosecond accuracy and precision.

  11. Developing and executing an effective research plan.

    Science.gov (United States)

    Weber, Robert J; Cobaugh, Daniel J

    2008-11-01

    Practical approaches to successful implementation of practice-based research are examined. In order to successfully complete a research project, its scope must be clearly defined. The research question and the specific aims or objectives should guide the study. For practice-based research, the clinical setting is the most likely source to find important research questions. The research idea should be realistic and relevant to the interests of the investigators and the organization and its patients. Once the lead investigator has developed a research idea, a comprehensive literature review should be performed. The aims of the project should be new, relevant, concise, and feasible. The researchers must budget adequate time to carefully consider, develop, and seek input on the research question and objectives using the principles of project management. Identifying a group of individuals that can work together to ensure successful completion of the proposed research should be one of the first steps in developing the research plan. Dividing work tasks can alleviate workload for individual members of the research team. The development of a timeline to help guide the execution of the research project plan is critical. Steps that can be especially time-consuming include obtaining financial support, garnering support from key stakeholders, and getting institutional review board consent. One of the primary goals of conducting research is to share the knowledge that has been gained through presentations at national and international conferences and publications in peer-reviewed biomedical journals. Practice-based research presents numerous challenges, especially for new investigators. Integration of the principles of project management into research planning can lead to more efficient study execution and higher-quality results.

  12. Single spike operation in SPARC SASE-FEL

    Energy Technology Data Exchange (ETDEWEB)

    Boscolo, M. [INFN/LNF, Via Enrico Fermi 40, 00044 Frascati, Roma (Italy)], E-mail: Manuela.Boscolo@lnf.infn.it; Ferrario, M. [INFN/LNF, Via Enrico Fermi 40, 00044 Frascati, Roma (Italy); Boscolo, I.; Castelli, F.; Cialdi, S.; Petrillo, V. [University of Milano, Via Celoria 16, 20133 Milano (Italy); Bonifacio, R. [CBPF, Rio de Janeiro (Brazil); Palumbo, L. [La Sapienza, Roma (Italy); Serafini, L. [INFN/MI, Via Celoria 16, 20133 Milano (Italy)

    2008-08-01

    We describe in this paper a possible experiment with the existing SPARC photoinjector to test the generation of sub-picosecond high brightness electron bunches able to produce single spike radiation pulses at 500 nm in the SPARC self-amplified spontaneous emission free-electron laser (SASE-FEL). The main purpose of the experiment will be the production of short electron bunches as long as few SASE cooperation lengths and to validate scaling laws to foresee operation at shorter wavelength in the future operation with SPARX. The basic physics, the experimental parameters and 3D simulations are discussed.

  13. Investigation of 3D effects on FEL operation

    Science.gov (United States)

    van Werkhoven, G. H. C.; Faatz, B.; Schep, T. J.

    1993-07-01

    An investigation is made of 3D effects on FEL operation by comparing the 3D simulation code TDA with a 1 {1}/{2}D model. In the latter model, the full spatial dependence of the radiation field is taken into account, whereas the electrons are treated as moving in a 1D, density-averaged ponderomotive potential. Three dimensional effects like a radial beam profile, emittance and betatron oscillations are investigated. For FELIX parameters, the 1 {1}/{2}D model is in good agreement with TDA.

  14. High Average Current Electron Guns for High-Power FELs

    Science.gov (United States)

    2009-12-09

    FELs 10 Appendix B: Thermionic Injectors 11 Appendix C: Grid Fields and Bunch Emittance 13 Appendix D: PARMELA Simulation of an IOT Gun 16...Inductive Output Tube ( IOT ) amplifiers [32-34] and can generate average currents of ~1 A, peak currents of ~ 5-10 A, cathode-anode voltages of ~ 35...of grid wires, centered at z = zG and x = ±a, ±3a, ±5a, ..., is given by <D(JC,Z) = - X n = ±l.±3. Fa(x,z) Gn(x,z) ( C3 ) where *0 = (1 / 2

  15. Timing Diagnostics and Coherent Harmonics from a test-FEL

    OpenAIRE

    Cutic, Nino

    2011-01-01

    The test free-electron laser (test-FEL) at MAX-lab in Lund demonstrated for the first time circularly polarized coherent femtosecond pulses at 66 nm wavelength. A 375 MeV electron bunch was seeded by a femtosecond laser at 263 nm and coherent harmonics were extracted in an APPLE-II type elliptical undulator. A thermionic gun with a barium oxide cathode was adapted for photocathode operation, and the performance of the gun was tested. Measurements showed the production of 200 pC...

  16. Design Study of a Compact Megawatt Class FEL Amplifier Based on the VISA Undulator

    CERN Document Server

    Watanabe, T; Murphy, J B; Pinayev, I P; Rose, J; Shaftan, T V; Skaritka, J; Tanabé, T; Tsang, Thomas; Wang, X J; Yu, L H

    2005-01-01

    The design of a Short Rayleigh Length (SRL) FEL amplifier based on the strong focusing VISA undulator [1] is presented in this study. The SRL FEL amplifier will be operating in the IR (0.8 - 1 μm), and consists of a two-meter VISA undulator with a peak seed laser power of about 1 kW. The FEL power and transverse mode evolution along the undulator were investigated using the three-dimensional numerical code GENESIS1.3. The evolution of the FEL output from the undulator exit to the first downstream optics is also studied. The possibility of using the proposed amplifier for a two-stage cascaded HGHG FEL [2] at the BNL SDL is also explored. The design parameters and the numerical results will be presented.

  17. Steady State Analysis of Short-wavelength, High-gainFELs in a Large Storage Ring

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Z.; Bane, K.; Cai, Y.; Chao, A.; Hettel, R.; /SLAC; Pellegrini, C.; /UCLA

    2007-10-15

    Storage ring FELs have operated successfully in the low-gain regime using optical cavities. Discussions of a high-gain FEL in a storage ring typically involve a special bypass to decouple the FEL interaction from the storage ring dynamics. In this paper, we investigate the coupled dynamics of a high-gain FEL in a large storage ring such as PEP and analyze the equilibrium solution. We show that an FEL in the EUV and soft x-ray regimes can be integrated into a very bright storage ring and potentially provides three orders of magnitude improvement in the average brightness at these radiation wavelengths. We also discuss possibilities of seeding with HHG sources to obtain ultra-short, high-peak power EUV and soft x-ray pulses.

  18. Research methods for formal consensus development.

    Science.gov (United States)

    James, Daphne; Warren-Forward, Helen

    2015-01-01

    This paper reviews three research methods for developing consensus. Consensus statements and guidelines are increasingly used to clarify and standardise practice, and inform health policy, when relevant and rigorous evidence is lacking. Clinicians need to evaluate the quality of practice guidelines to determine whether to incorporate them into clinical practice or reject them. Formal methods of developing consensus provide a scientific method that uses expert panel members to evaluate current evidence and expert opinions to produce consensus statements for clinical problems. Online search for relevant literature was conducted in Medline and CINAHL. A literature review of consensus, consensus development and research methods papers published in English in peer-reviewed journals. The three methods of developing consensus discussed are the Delphi technique, nominal group technique and the consensus development conference. The techniques and their respective advantages are described, and examples from the literature are provided. The three methods are compared and a flowchart to assist researchers selecting an appropriate method is included. Online resources with information on the development and evaluation of clinical guidelines are reviewed. This paper will help researchers to select an appropriate research method for developing consensus statements and guidelines. When developing consensus guidelines for clinical practice, researchers should use a formal research method to ensure rigour and credibility.

  19. Pathway to a compact SASE FEL device

    Energy Technology Data Exchange (ETDEWEB)

    Dattoli, G., E-mail: giuseppe.dattoli@enea.it [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Di Palma, E. [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Petrillo, V. [Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy); Rau, Julietta V. [Istituto di Struttura della Materia, ISM-CNR, Via del Fosso del Cavaliere, 100-00133 Rome (Italy); Sabia, E.; Spassovsky, I. [ENEA – Centro Ricerche Frascati, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Biedron, S.G.; Einstein, J.; Milton, S.V. [CSU – Colorado State University, Fort Collins, CO (United States)

    2015-10-21

    Newly developed high peak power lasers have opened the possibilities of driving coherent light sources operating with laser plasma accelerated beams and wave undulators. We speculate on the combination of these two concepts and show that the merging of the underlying technologies could lead to new and interesting possibilities to achieve truly compact, coherent radiator devices.

  20. Pathway to a Compact SASE FEL Device

    CERN Document Server

    Dattoli, G; Petrillo, V; Rau, J V; Sabia, E; Spassovsky, I; Biedron, S G; Einstein, J; Milton, S V

    2015-01-01

    Newly developed high peak power lasers have opened the possibilities of driving coherent light sources operating with laser plasma accelerated beams and wave undulators. We speculate on the combination of these two concepts and show that the merging of the underlying technologies could lead to new and interesting possibilities to achieve truly compact, coherent radiator devices.

  1. Professional development workshops for physics education research

    Science.gov (United States)

    Sayre, Eleanor C.; Franklin, Scott V.; Kustusch, Mary Bridget

    2017-01-01

    Physics education research holds the promise of satisfying expectations of both scholarship, which is increasing at teaching-centric institutions, and teaching effectiveness, a concern at all institutions. Additionally, junior physics education researchers seek more diverse training in research methods and theories. Emerging education researchers need support as they develop their research programs and expand their theoretical and methodological expertise, and they benefit from the guidance of knowledgable peers and near-peers. Our two-part professional development model combines intensive in-person workshops with long-term remote activities. During a two-week in-person workshop, emerging and established education researchers work closely together to develop research questions, learn appropriate analytic techniques, and collect a corpus of data appropriate to their research questions. Afterwards, they meet biweekly in a distributed, mentored research group to share analyses and develop their ideas into publishable papers. In this talk, we discuss this model for professional development and show results from one three-year implementation in the IMPRESS program at the Rochester Institute of Technology. Partially funded by the PERTG of the AAPT.

  2. Research and Development Toward a 4.5-1.5 {Angstrom} Linac Coherent Light Source (LCLS) at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Tatchyn, R.; Arthur, J.; Baltay, M. [and others

    1995-08-01

    In recent years significant studies have been initiated on the feasibility of utilizing a portion of the 3km S-band accelerator at SLAC to drive a short wavelength (4.5-1.5 A) Linac Coherent Light Source (LCLS), a Free Electron Laser (FEL) operating in the Self- Amplified Spontaneous Emission (SASE) regime. Electron beam requirements for single-pass saturation in a minimal time include: (1) a peak current in the 7 kA range, (2) a relative energy spread of {lt}0.05%, and (3) a transverse emittance, {epsilon}[r-m], approximating the diffraction limit condition {epsilon} = {lambda} / 4{pi}, where lambda(m) is the output wavelength. Requirements on the insertion device include field error levels of 0.02% for keeping the electron bunch centered on and in phase with the amplified photons, and a focusing beta of 8 m/rad for inhibiting the dilution of its transverse density. Although much progress has been made in developing individual components and beam processing techniques necessary for LCLS operation down to approx. 20 A, a substantial amount of research and development is still required in a number of theoretical and experimental areas leading to the construction and operation of a 4.5-1.5 A LCLS. In this paper we report on a research and development program underway and in planning at SLAC for addressing critical questions in these areas.

  3. Self-amplified spontaneous emission FEL with energy-chirped electron beam and its application for generation of attosecond x-ray pulses

    Directory of Open Access Journals (Sweden)

    E. L. Saldin

    2006-05-01

    Full Text Available Influence of a linear energy chirp in the electron beam on a self-amplified spontaneous emission (SASE Free Electron Laser (FEL operation is studied analytically and numerically using a 1D model. Analytical results are based on the theoretical background developed by Krinsky and Huang [Phys. Rev. ST Accel. Beams 6, 050702 (2003PRABFM1098-4402]. Explicit expressions for Green’s functions and for output power of a SASE FEL are obtained for the high-gain linear regime in the limits of small and large energy chirp parameters. Saturation length and power versus energy chirp parameter are calculated numerically. It is shown that the effect of linear energy chirp on FEL gain is equivalent to the linear undulator tapering (or linear energy variation along the undulator. A consequence of this fact is a possibility to perfectly compensate FEL gain degradation, caused by the energy chirp, by means of the undulator tapering independently of the value of the energy chirp parameter. An application of this effect for generation of attosecond pulses from a hard x-ray FEL is proposed. Strong energy modulation within a short slice of an electron bunch is produced by a few-cycle optical laser pulse in a short undulator, placed in front of the main undulator. Gain degradation within this slice is compensated by an appropriate undulator taper while the rest of the bunch suffers from this taper and does not lase. Three-dimensional simulations predict that short (200 attoseconds high-power (up to 100 GW pulses can be produced in Angstrom wavelength range with a high degree of contrast. A possibility to reduce pulse duration to sub-100 attosecond scale is discussed.

  4. Research and Development in the Muslim Society

    Directory of Open Access Journals (Sweden)

    Hikmatullah Babu Sahib

    2005-06-01

    Full Text Available Abstract: Despite clear-cut exhortation from the Qur’ān and Sunnah, Muslims are not showing much interest in R&D. Many Muslims are finding comfort in simply importing foreign goods and solutions to enrich their lives. Data analyses show that the Muslim world is far behind other countries in terms of research and development. There exists some misunderstanding in the Muslim mind on the meaning and role of research and development. There is a need for sustained research in all aspects of the society for it to develop as envisaged by Islam.

  5. Mouse Model of Cat Allergic Rhinitis and Intranasal Liposome-Adjuvanted Refined Fel d 1 Vaccine

    Science.gov (United States)

    Tasaniyananda, Natt; Chaisri, Urai; Tungtrongchitr, Anchalee; Chaicumpa, Wanpen; Sookrung, Nitat

    2016-01-01

    Cats (Felis domesticus) are rich source of airborne allergens that prevailed in the environment and sensitized a number of people to allergy. In this study, a mouse model of allergic rhinitis caused by the cat allergens was developed for the first time and the model was used for testing therapeutic efficacy of a novel intranasal liposome-entrapped vaccines made of native Fel d 1 (major cat allergen) in comparison with the vaccine made of crude cat hair extract (cCE). BALB/c mice were sensitized with cCE mixed with alum intraperitoneally and intranasally. The allergic mice were treated with eight doses of either liposome (L)-entrapped native Fel d 1 (L-nFD1), L-cCE), or placebo on every alternate day. Vaccine efficacy evaluation was performed one day after provoking the treated mice with aerosolic cCE. All allergenized mice developed histological features of allergic rhinitis with rises of serum specific-IgE and Th2 cytokine gene expression. Serum IgE and intranasal mucus production of allergic mice reduced significantly after vaccination in comparison with the placebo mice. The vaccines also caused a shift of the Th2 response (reduction of Th2 cytokine expressions) towards the non-pathogenic responses: Th1 (down-regulation of the Th1 suppressive cytokine gene, IL-35) and Treg (up-regulation of IL-10 and TGF-β). In conclusions, a mouse model of allergic rhinitis to cat allergens was successfully developed. The intranasal, liposome-adjuvanted vaccines, especially the refined single allergen formulation, assuaged the allergic manifestations in the modeled mice. The prototype vaccine is worthwhile testing further for clinical use in the pet allergic patients. PMID:26954254

  6. Mouse Model of Cat Allergic Rhinitis and Intranasal Liposome-Adjuvanted Refined Fel d 1 Vaccine.

    Directory of Open Access Journals (Sweden)

    Natt Tasaniyananda

    Full Text Available Cats (Felis domesticus are rich source of airborne allergens that prevailed in the environment and sensitized a number of people to allergy. In this study, a mouse model of allergic rhinitis caused by the cat allergens was developed for the first time and the model was used for testing therapeutic efficacy of a novel intranasal liposome-entrapped vaccines made of native Fel d 1 (major cat allergen in comparison with the vaccine made of crude cat hair extract (cCE. BALB/c mice were sensitized with cCE mixed with alum intraperitoneally and intranasally. The allergic mice were treated with eight doses of either liposome (L-entrapped native Fel d 1 (L-nFD1, L-cCE, or placebo on every alternate day. Vaccine efficacy evaluation was performed one day after provoking the treated mice with aerosolic cCE. All allergenized mice developed histological features of allergic rhinitis with rises of serum specific-IgE and Th2 cytokine gene expression. Serum IgE and intranasal mucus production of allergic mice reduced significantly after vaccination in comparison with the placebo mice. The vaccines also caused a shift of the Th2 response (reduction of Th2 cytokine expressions towards the non-pathogenic responses: Th1 (down-regulation of the Th1 suppressive cytokine gene, IL-35 and Treg (up-regulation of IL-10 and TGF-β. In conclusions, a mouse model of allergic rhinitis to cat allergens was successfully developed. The intranasal, liposome-adjuvanted vaccines, especially the refined single allergen formulation, assuaged the allergic manifestations in the modeled mice. The prototype vaccine is worthwhile testing further for clinical use in the pet allergic patients.

  7. Software Development as Music Education Research

    Science.gov (United States)

    Brown, Andrew R.

    2007-01-01

    This paper discusses how software development can be used as a method for music education research. It explains how software development can externalize ideas, stimulate action and reflection, and provide evidence to support the educative value of new software-based experiences. Parallels between the interactive software development process and…

  8. First Lasing at the ELBE mid-IR FEL

    CERN Document Server

    Michel, Peter

    2004-01-01

    First lasing of the mid infrared FEL at ELBE was achieved on May 7, 2004. The Radiation Source ELBE at the Forschungszentrum Rossendorf in Dresden is currently under transition from commissioning to regular user operation. Presently the electron linac produces an up to 18 MeV, 1 mA (cw) electron beam which is alotted to generate various kinds of secondary radiation. After the successful commissioning of the bremsstrahlung and channeling-X-ray facilities during 2003 stable lasing has now been observed in the IR range (15 to 22 μm). The oscillator FEL is equipped with two planar undulator units, both consisting of 34 hybrid permanent magnet periods of 27.3 mm (Krms = 0.3 - 0.8). The distance between the two parts is variable and the gaps can be adjusted and tapered independently. At 19.6 µm an optical power of 3W was out-coupled in a macro pulse of 0.6 ms duration using an electron beam energy of 16.1 MeV and an energy spread of less than 100 keV; the micropulse charge was 50 pC and its width slightly a...

  9. Sub-Terawatt Mode of Operation of X-ray SASE FEL

    CERN Document Server

    Saldin, Evgeny L; Yurkov, Mikhail V

    2004-01-01

    Application of dispersion section in combination with undulator tapering is an effective tool for achieving extremely high output power of XFEL. In the first part of the undulator the gap is fixed, and amplification process is developed as in usual SASE FEL. When energy modulation of the electron beam becomes to be comparable with local energy spread, the electron bunch passes via dispersion section resulting in an effective compression of the electron bunch. Then bunched electron beam enters the second half of the undulator where the gap is tapered for effective extraction of the energy from the electron bunch. Our studies shows that output radiation power can reach a sub-TW level in Angstrom wavelength range.

  10. Research and Development Costs in Retail Trade

    Directory of Open Access Journals (Sweden)

    Radojko LUKIC

    2016-12-01

    Full Text Available Research and development expenses are crucial business performance factors for all enterprises, including trading companies. The size and structure of these expenses depend largely on the nature of a company’s activities. Due to such importance and specificity, the research focus of this article is on R&D expenses in trading companies with particular emphasis on retail companies. Their share in the sales revenue of trading companies is increasingly important and determined by many factors, such as innovation, size, location, product categories, and others. Due to varying intensity of influence of these and other factors, research and development expenses in commercial companies differ among countries, trade types (wholesale, retail, wholesale and retail, retail formats (store types and product categories. Understanding the factors of these differences is important for efficient management of research and development costs in trade, particularly retail companies. They are the focus of research in this work.

  11. Researchers Develop Potential Oral Treatment for Hemophilia

    Science.gov (United States)

    ... 162798.html Researchers Develop Potential Oral Treatment for Hemophilia Currently, genetic bleeding disorder is treated with injections ... THURSDAY, Dec. 29, 2016 (HealthDay News) -- People with hemophilia have to endure painful injections every few days ...

  12. Entrepreneurial skill development: Participatory action research ...

    African Journals Online (AJOL)

    BlignautAS

    Entrepreneurial skill development: Participatory action research approach in a rural community. Entrepreneurial ..... business skills and a practical baking section with the aim to equip the ..... velopment Strategy: Leadership Pack. Pretoria. Gov-.

  13. Journal of Research in National Development

    African Journals Online (AJOL)

    The Journal of Research in National Development aims to encourage ... the Nigerian workforce system: announcing the arrival of crude oil in the nation's economy ... The freedom of information act and the practice of journalism in Nigeria: an ...

  14. Participatory Research for a Radical Community Development.

    Science.gov (United States)

    Mulenga, Derek C.

    1994-01-01

    Critically examines community development assumptions through historical analysis and mapping of political discourse. Using the methods of Foucault, Said, and Gramsci, demonstrates how participatory research, concerned with releasing people's knowledge through transformation, can expose and resist dominant discourses. (SK)

  15. Advancing Administrative Supports for Research Development

    Science.gov (United States)

    Briar-Lawson, Katharine; Korr, Wynne; White, Barbara; Vroom, Phyllis; Zabora, James; Middleton, Jane; Shank, Barbara; Schatz, Mona

    2008-01-01

    Research administrative supports must parallel and reinforce faculty initiatives in research grant procurement. This article features several types of developments that draw on presentations at the National Association of Deans and Directors of Schools of Social Work meetings. Key changes in social work programs are addressed, including the…

  16. Developing Research Skills across the Undergraduate Curriculum

    Science.gov (United States)

    Gray, Simon; Coates, Lee; Fraser, Ann; Pierce, Pam

    2015-01-01

    This chapter describes consortial efforts within the Great Lakes Colleges Association to share expertise and programming to build research skills throughout the undergraduate curriculum. Strategies to scaffold research skill development are provided from Allegheny College, Kalamazoo College, and The College of Wooster.

  17. Developing Research Skills across the Undergraduate Curriculum

    Science.gov (United States)

    Gray, Simon; Coates, Lee; Fraser, Ann; Pierce, Pam

    2015-01-01

    This chapter describes consortial efforts within the Great Lakes Colleges Association to share expertise and programming to build research skills throughout the undergraduate curriculum. Strategies to scaffold research skill development are provided from Allegheny College, Kalamazoo College, and The College of Wooster.

  18. 78 FR 28630 - Pfizer Therapeutic Research, Pfizer Worldwide Research & Development Division, Formerly Known as...

    Science.gov (United States)

    2013-05-15

    ... Employment and Training Administration Pfizer Therapeutic Research, Pfizer Worldwide Research & Development... Therapeutic Research, Pfizer Worldwide Research & Development Division, Comparative Medicine Department... Research, Pfizer Worldwide Research & Development Division, formerly known as Warner Lambert Company...

  19. Research and Development in the Muslim Society

    OpenAIRE

    Hikmatullah Babu Sahib

    2005-01-01

    Abstract: Despite clear-cut exhortation from the Qur’ān and Sunnah, Muslims are not showing much interest in R&D. Many Muslims are finding comfort in simply importing foreign goods and solutions to enrich their lives. Data analyses show that the Muslim world is far behind other countries in terms of research and development. There exists some misunderstanding in the Muslim mind on the meaning and role of research and development. There is a need for sustained research in all aspects of the so...

  20. Characteristics of the FEL project for the MUH experiment; Stato del progetto FEL per l`esperimeto MUH

    Energy Technology Data Exchange (ETDEWEB)

    Ciocci, F.; Doria, A.; Fascetti, M.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Picardi, L.; Renieri, A.; Ronci, G.; Ronsivalle, C.; Vignati, A. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione

    1999-01-01

    The design characteristics of a compact Free Electron Laser (FEL) operating in the far infrared spectral range between 200 and 600 {mu}m are presented in this report. The device can be employed in a fundamental physics experiment to be performed in collaboration with INFN-Trieste and the Paul Sherrer Institute- Villigen. Spectroscopic measurements in the above spectral region will allow one to determine the energy difference between the levels 3D-3P in the {mu}P system with great accuracy. [Italiano] In questo rapporto vengono presentate le caratteristiche di progetto di un Laser ad Elettroni Liberi (FEL) compatto operante nel lontano infrarosso a lunghezze d`onda comprese tra 200 e 600 {mu}m. Tale laser potra` essere impiegato in un esperimento di fisica fondamentale su idrogeno muonico in collaborazione con INFN-Trieste ed il Paul Sherrer Institute-Villigen. Le misure spettroscopiche nella regione spettrale del lontano infrarosso consentiranno di determinare con grande accuratezza la differenza di energia dei livelli 3D-3P nel sistema {mu}P. Attraverso la misura di questa transizione sara` possibile effettuare un test delle correzioni di Meccanica Quantistica (QED) alle energie di legame, migliorando di un ordine di grandezza l`accuratezza della misura della polarizzazione del vuoto.

  1. Performance of a Combined System Using an X-Ray FEL Oscillator and a High-Gain FEL Amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, L.; Lindberg, R.; Kim, K. -J.

    2016-10-01

    The LCLS-II at SLAC will feature a 4 GeV CW superconducting (SC) RF linac [1] that can potentially drive a 5th harmonic X-Ray FEL Oscillator (XFELO) to produce fully coherent, 1 MW photon pulses with a 5 meV bandwidth at 14.4 keV [2]. The XFELO output can serve as the input seed signal for a high-gain FEL amplifier employing fs electron beams from the normal conducting SLAC linac, thereby generating coherent, fs x-ray pulses with TW peak powers using a tapered undulator after saturation [3]. Coherent, intense output at several tens of keV will also be feasible if one considers a harmonic generation scheme. Thus, one can potentially reach the 42 keV photon energy required for the MaRIE project [4] by beginning with an XFELO operating at the 3rd harmonic to produce 14.0 keV photons using a 12 GeV SCRF linac, and then subsequently using the high-gain harmonic generation scheme to generate and amplify the 3th harmonic at 42 keV [5]. We report extensive GINGER simulations that determine an optimized parameter set for the combined system.

  2. Development of research discourses: a conceptual map.

    Science.gov (United States)

    Freshwater, Dawn; Cahill, Jane

    2016-09-01

    The aim of this study was to discuss: (1) how methodologies are constructed and perpetuated in the context of research paradigms; (2) what exactly constitutes a paradigm; (3) how the proposed conceptual map of discourse development provides a new and original method for understanding knowledge production. In nursing research, methodologies are constructed by several external and internal contextually driven influences. Our focus is on how two methodological paradigms - evidence-based practice and mixed methods - continue to impact and be impacted by patterns of knowledge production. Discussion paper. This discussion is based on our own experiences and supported by literature and theory using examples from the two paradigms to illustrate how discourses are developed, perpetuated and deconstructed and how these have specific impacts on qualitative nursing research. The conceptual map should be used to cultivate an awareness in practitioners, researchers and policy makers of how discourses surrounding research evidence and research practices are generated. This level of awareness will facilitate critical reflection on how certain practices assume dominance, potentially leading to hegemony in nursing research, practice and scholarship. This research offers a critical examination of the meaning of paradigms and a meta-perspective on the production and practice of methodologies using a conceptual map of discourse development as a heuristic device. We anticipate that these examples will encourage debate and discussion on how methodologies and paradigms are perpetuated in academia and the impact this has on nursing knowledge. © 2016 John Wiley & Sons Ltd.

  3. Business model in research-development activity

    Directory of Open Access Journals (Sweden)

    Koszałka Jerzy

    2016-09-01

    Full Text Available The partners and allies of business practice in the processes of modernization of the economy are scientific-research institutions, such as scientific institutes, research-development units and universities. A market on which companies can look for the solutions they need and scientific-research institutions can look for inspiration, partners and capital is being formed. The market provides conditions for operation, development and implementation of developed solutions. Taking into consideration the complexity of market, technical, legal, financial, or intellectual property protection issues, research-development units are more and more frequently unable to function efficiently without a clear and unequivocal definition of goals, methods and conditions of activity. Their market offer has to take into consideration not just scientific-research, or methodological aspects. Taking into consideration continuously growing demands of the clients and pressure of the competition, scientific-research institutions have to pay attention also to market, information, personnel, or financial aspects typical of strictly commercial ventures. What may support a comprehensive preparation and implementation of scientific-research activities under market conditions are tools successfully used in trade and economy, such as business models. These issues are the basis of deliberations contained in this work.

  4. Is Mixed Methods Research Used in Australian Career Development Research?

    Science.gov (United States)

    Cameron, Roslyn

    2010-01-01

    Mixed methods research has become a substantive and growing methodological force that is growing in popularity within the human and social sciences. This article reports the findings of a study that has systematically reviewed articles from the "Australian Journal of Career Development" from 2004 to 2009. The aim of the study was to…

  5. Is Mixed Methods Research Used in Australian Career Development Research?

    Science.gov (United States)

    Cameron, Roslyn

    2010-01-01

    Mixed methods research has become a substantive and growing methodological force that is growing in popularity within the human and social sciences. This article reports the findings of a study that has systematically reviewed articles from the "Australian Journal of Career Development" from 2004 to 2009. The aim of the study was to…

  6. Operational research(ers) in development: Growing a new ...

    African Journals Online (AJOL)

    Africa by critically evaluating a Masters program in Operational Research in Development ... specifically with the training of OR practitioners who possess the skills needed ... perspective rather than providing a complete review of the field. .... plemented, either because some sector of participants who are key to success will.

  7. Early Brain Development Research Review and Update

    Science.gov (United States)

    Schiller, Pam

    2010-01-01

    Thanks to imaging technology used in neurobiology, people have access to useful and critical information regarding the development of the human brain. This information allows them to become much more effective in helping children in their early development. In fact, when people base their practices on the findings from medical science research,…

  8. Children's Vocational Development: A Research Rationale

    Science.gov (United States)

    Porfeli, Erik J.; Hartung, Paul J.; Vondracek, Fred W.

    2008-01-01

    Vocational development research and interventions have focused primarily on adolescents and young adults. The lack of attention to career development antecedents in children has led to a serious neglect of this period of life when the foundation is laid for career choices and outcomes in later life. A harmful by-product is the frequent preclusion…

  9. Early Brain Development Research Review and Update

    Science.gov (United States)

    Schiller, Pam

    2010-01-01

    Thanks to imaging technology used in neurobiology, people have access to useful and critical information regarding the development of the human brain. This information allows them to become much more effective in helping children in their early development. In fact, when people base their practices on the findings from medical science research,…

  10. Second Language Writing Development: A Research Agenda

    Science.gov (United States)

    Polio, Charlene

    2017-01-01

    In 1998, Wolfe-Quintero, Inagaki & Kim published a monograph describing measures used in assessing writing development. Despite more recent research on linguistic development (e.g., Bulté & Housen 2012; Verspoor, Schmid & Xu 2012; Connor-Linton & Polio 2014), the volume is still a valuable resource and good starting point for…

  11. [Landscape classification: research progress and development trend].

    Science.gov (United States)

    Liang, Fa-Chao; Liu, Li-Ming

    2011-06-01

    Landscape classification is the basis of the researches on landscape structure, process, and function, and also, the prerequisite for landscape evaluation, planning, protection, and management, directly affecting the precision and practicability of landscape research. This paper reviewed the research progress on the landscape classification system, theory, and methodology, and summarized the key problems and deficiencies of current researches. Some major landscape classification systems, e. g. , LANMAP and MUFIC, were introduced and discussed. It was suggested that a qualitative and quantitative comprehensive classification based on the ideology of functional structure shape and on the integral consideration of landscape classification utility, landscape function, landscape structure, physiogeographical factors, and human disturbance intensity should be the major research directions in the future. The integration of mapping, 3S technology, quantitative mathematics modeling, computer artificial intelligence, and professional knowledge to enhance the precision of landscape classification would be the key issues and the development trend in the researches of landscape classification.

  12. Entrepreneurship research in Spain: developments and distinctiveness.

    Science.gov (United States)

    Sánchez, José C; Gutiérrez, Andrea

    2011-08-01

    This article presents a review of research on entrepreneurship in Spain, paying particular attention to its beginnings, nature and main focus of interest. We have developed a database based on the review of 471 works produced between 1977 and 2009, including articles published in national and international journals and dissertations (read in Spain) that allowed us to extract the following results. There is a preference for qualitative methods, conceptual contributions and the entrepreneurial process as the privileged research theme. There is also a strong focus of interest on micro and small enterprises. These characteristics of Spanish research in areas of entrepreneurship can make a distinctive contribution to international research. However, the dissemination of knowledge and inadequate strategies for international publication limit the diffusion of Spanish research in entrepreneurship. Lastly, we discuss the implications for future research.

  13. Resource recovery: research development and demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    Scaramelli, A B

    1979-10-01

    Implementation of resource recovery is being retarded by technological uncertainties and institutional impediments. Development and commercialization of new competitive technologies are not proceeding rapidly because a structured development program for the industry is lacking. The US Department of Energy (DOE) has recognized these problems, and as part of its overall program in energy recovery from urban waste, it is developing a near- and longer-term research, development, and demonstration (RD and D) program to accelerate commercialization of promising resource recovery technologies. The MITRE Corporation was contracted to develop a near-term RD and D Plan for resource recovery which identifies actions which should be taken over the next three years to accelerate commercialization of existing and developing technologies. The research needs presented in this Plan exist in the industry today. The resolution, however, is not necessarily the sole responsibility of DOE, but rather calls for a combination of public and private sector efforts. An individual research program is presented for each resource recovery technology. A program consists of a combination of bench-, pilot-, demonstration-, and full-scale process and equipment evaluations as well as qualitative and quantitative studies. Each research program is tailored to alleviate the problems of a technology such that their resolution will accelerate the rate at which the technology advances toward commercial readiness and realizes commercial implementation. All the research needs identified are actions which should be taken in the next three years to advance the field of resource recovery.

  14. Developing Ethics and Standards in Action Research

    Directory of Open Access Journals (Sweden)

    Ben Boog

    2008-12-01

    Full Text Available In a globalizing world, what role can social science research – particularly action research – play in order to address the risks of exclusion, poverty, social and physical insecurity and environmental deprivation? More specifically, how can this type of research be conducted in a participatory, responsible, transparent and scientific way? In other words: what about the ethics and standards in action research? This was the main focus of the World Congress on Action Research and Action Learning (August 2006 organized by the University of Groningen and the Higher Education Group of the Northern Netherlands. We begin by discussing the core characteristics of action research with reference to theory and practice. Reflection and action are key constituents of the process through the enactment of action research. The middle section draws upon the research findings presented at the congress and published in a book [B. Boog, J. Preece, M. Slagter and J. Zeelen (Eds. (2008 Towards Quality Improvement of Action Research. Developing Ethics and Standards, Rotterdam/Taipei: Sense Publishers]. Citing authors who contributed chapters to the book mentioned above, we analyze four important subthemes: ‘participation, power and rapport’; ‘quality of research and quality management’; ‘learning to solve your own problems in complex responsive social systems, and ‘heuristics (rules of thumb for action research practice’. Finally, we comment on possible quality improvements for action research. Our remarks relate to the problems of implementing the concept of participation, the ambition of action research to contribute to both knowledge production and social change and the need for systematic reconstruction (scientific validation of action research.

  15. The SPARC project: a high-brightness electron beam source at LNF to drive a SASE-FEL experiment

    Energy Technology Data Exchange (ETDEWEB)

    Alesini, D.; Bertolucci, S.; Biagini, M.E.; Biscari, C.; Boni, R.; Boscolo, M.; Castellano, M.; Clozza, A.; Di Pirro, G.; Drago, A.; Esposito, A.; Ferrario, M. E-mail: massimo.ferrario@lnf.infn.it; Fusco, V.; Gallo, A.; Ghigo, A.; Guiducci, S.; Incurvati, M.; Laurelli, P.; Ligi, C.; Marcellini, F.; Migliorati, M.; Milardi, C.; Palumbo, L.; Pellegrino, L.; Preger, M.; Raimondi, P.; Ricci, R.; Sanelli, C.; Sgamma, F.; Spataro, B.; Serio, M.; Stecchi, A.; Stella, A.; Tazzioli, F.; Vaccarezza, C.; Vescovi, M.; Vicario, C.; Zobov, M.; Acerbi, E.; Alessandria, F.; Barni, D.; Bellomo, G.; Boscolo, I.; Broggi, F.; Cialdi, S.; DeMartinis, C.; Giove, D.; Maroli, C.; Petrillo, V.; Rome' , M.; Serafini, L.; Chiadroni, E.; Felici, G.; Levi, D.; Mastrucci, M.; Mattioli, M.; Medici, G.; Petrarca, G.S.; Catani, L.; Cianchi, A.; D' Angelo, A.; Di Salvo, R.; Fantini, A.; Moricciani, D.; Schaerf, C.; Bartolini, R.; Ciocci, F.; Dattoli, G.; Doria, A.; Flora, F.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Mezi, L.; Ottaviani, P.L.; Picardi, L.; Quattromini, M.; Renieri, A.; Ronsivalle, C.; Avaldi, L.; Carbone, C.; Cricenti, A.; Pifferi, A.; Perfetti, P.; Prosperi, T.; Albertini, V. Rossi; Quaresima, C.; Zema, N

    2003-07-11

    The Project Sorgente Pulsata e Amplificata di Radiazione Coerente (SPARC), proposed by a collaboration among ENEA-INFN-CNR-Universita' di Tor Vergata-INFM-ST, was recently approved by the Italian Government and will be built at LNF. The aim of the project is to promote an R and D activity oriented to the development of a coherent ultra-brilliant X-ray source in Italy. This collaboration has identified a program founded on two main issues: the generation of ultra-high peak brightness electron beams and of resonant higher harmonics in the SASE-FEL process, as presented in this paper.

  16. Research and Development for X-Ray Optics and Diagnostics on the Linac Coherent Source (LCLS)

    Energy Technology Data Exchange (ETDEWEB)

    Bionta, R M; Arthur, J; Chapman, H; Craig, B; Klingmann, J; Kuba, J; London, R A; Ott, L; Ryutov, D; Shepherd, R; Shlyaptsev, V; Wootton, A

    2002-09-24

    The Linac Coherent Light Source (LCLS) is a 1.5 to 15 {angstrom} wavelength Free-Electron Laser (PEL), under development at the Stanford Linear Accelerator Center (SLAC). The photon output consists of high brightness, transversely coherent pulses with duration < 300 fs, together with a broad spontaneous spectrum. The output energy density per unit area, pulse duration, repetition rate, and small FEL spot size pose special challenges for optical components and diagnostics downstream of the undulator. Planning for the photon beam transport, manipulation and diagnostics downstream of the undulator has begun.

  17. Analysis of FEL-based CeC amplification at high gain limit

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G. [Brookhaven National Lab. (BNL), Upton, NY (United States); Litvinenko, V. [Brookhaven National Lab. (BNL), Upton, NY (United States); Jing, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-03

    An analysis of Coherent electron Cooling (CeC) amplifier based on 1D Free Electron Laser (FEL) theory was previously performed with exact solution of the dispersion relation, assuming electrons having Lorentzian energy distribution. At high gain limit, the asymptotic behavior of the FEL amplifier can be better understood by Taylor expanding the exact solution of the dispersion relation with respect to the detuning parameter. In this work, we make quadratic expansion of the dispersion relation for Lorentzian energy distribution and investigate how longitudinal space charge and electrons’ energy spread affect the FEL amplification process.

  18. Federal Support for Research and Development

    Science.gov (United States)

    2007-06-01

    credit lowers the tax bill of firms that increase their spending for research and development. In general, the credit is designed to apply to...Martin Buxton , Steve Hanney, and Teri Jones, “Estimating the Economic Value to Societies of the Impact of Health Research: A Critical Review...2007). a. Examples of other types of support include that provided for veterans under the GI Bill and tuition paid by the Department of Defense for

  19. Study of CSR Effects in the Jefferson Laboratory FEL Driver

    Energy Technology Data Exchange (ETDEWEB)

    Hall, C. C. [Colorado State U.; Biedron, S. [Colorado State U.; Burleson, Theodore A. [Colorado State U.; Milton, Stephen V. [Colorado State U.; Morin, Auralee L. [Colorado State U.; Benson, Stephen V. [JLAB; Douglas, David R. [JLAB; Evtushenko, Pavel E. [JLAB; Hannon, Fay E. [JLAB; Li, Rui [JLAB; Tennant, Christopher D. [JLAB; Zhang, Shukui [JLAB; Carlsten, Bruce E. [LANL; Lewellen, John W. [LANL

    2013-08-01

    In a recent experiment conducted on the Jefferson Laboratory IR FEL driver the effects of Coherent Synchrotron Radiation (CSR) on beam quality were studied. The primary goal of this work was to explore CSR output and effect on the beam with variation of the bunch compression in the IR chicane. This experiment also provides a valuable opportunity to benchmark existing CSR models in a system that may not be fully represented by a 1-D CSR model. Here we present results from this experiment and compare to initial simulations of CSR in the magnetic compression chicane of the machine. Finally, we touch upon the possibility for CSR induced microbunching gain in the magnetic compression chicane, and show that parameters in the machine are such that it should be thoroughly damped.

  20. Undulators to FELs: Nanometers, Femtoseconds, Coherence and Applications

    Energy Technology Data Exchange (ETDEWEB)

    Attwood, David [University of California Berkeley

    2011-11-30

    For scientists in many fields, from material science to the life sciences and archeology, synchrotron radiation, and in particular undulator radiation, has provide an intense source of x-rays which are tunable to the absorption edges of particular elements of interest, often permitting studies at high spatial and spectral resolution. Now a close cousin to the undulator, the x-ray free electron laser (XFEL) has emerged with improved spatial coherence and, perhaps more importantly, femtosecond pulse durations which permit dynamical studies. In the future attosecond x-ray capabilities are anticipated. In this colloqium we will describe some state of the art undulator studies, how undulators work, the evolution to FELs, their pulse and coherence properties, and the types of experiments envisioned.

  1. Harmonic Operation of the SDUV HGHG-FEL

    CERN Document Server

    Dai, Z M; Xu, Y; Zhao, X F; Zhao, Z

    2005-01-01

    In this paper, we study the harmonic operation of the SDUV HGHG-FEL (Phase-I), which consists of 160MeV linac, and two undulators separated by a dispersion section. A laser light at 352nm is injected into the first undulator to modulate the energy of the electron beam. This is followed by a dispersion section to produce spatial bunching at 352nm, and a second undulator which fundamental is resonant to 264nm and 3rd harmonic is resonant to 88nm. Upon passing through the second undulator, the prebunched electron beam first radiates coherently at 88nm (i.e., the 3rd harmonic of the second undulator which is integer times of the seeding laser), and then this radiation is exponentially amplified, while the fundamental of the second undulator is allowed to grow from noise. Under proper condition, the output power of the 3rd harmonic may be much higher than that of the fundamental.

  2. Lasing Towards the VUV in the NIJI-IV FEL

    CERN Document Server

    Yamada, K; Ohgaki, H; Mikado, T; Sugiyama, S; Yamazaki, T

    2000-01-01

    The lasing wavelength in the NIJI-IV free electron laser (FEL) reached 212 nm in the deep ultraviolet (UV) range. Adoption of Al sub 2 O sub 3 /SiO sub 2 multilayer mirrors to the laser cavity, whose light absorption loss is sufficiently small even below 220 nm, compared with HfO sub 2 /SiO sub 2 usually used in the UV, was essential to shorten the wavelength in the deep UV range. The laser gain was estimated to be approx 2% around 214 nm with a peak beam current of approx 4A (average beam current of approx 20 mA) from the measured loss of the cavity degraded after the lasing experiments which agreed well with an analytic gain calculation. Lasing in the vacuum ultraviolet (VUV) range is also expected even on the compact storage ring NIJI-IV with possible enhancement of the laser gain.

  3. Recent Results from the IR Upgrade FEL at Jefferson Lab

    CERN Document Server

    Benson, S V; Behre, C P; Biallas, G H; Boyce, J; Douglas, D; Dylla, H F D; Evans, R; Grippo, A G; Gubeli, J G; Hardy, D; Hernandez-Garcia, C; Jordan, K; Merminga, L; Neil, G; Preble, J P; Shinn, M D; Siggins, T; Walker, R L; Williams, G P; Zhang, S

    2005-01-01

    After demonstrating 10 kW operation with 1 second pulses, the Jefferson Lab program switched to demonstrating high power operation at short wavelengths using a new 8 cm period wiggler and a THz suppression chicane. We report here on the lasing results to date using this new configuration. We have demonstrated a large reduction in THz heating on the mirrors. We have also eliminated heating in the mirror steering assemblies, making operation at high power much more stable. Finally, we have greatly reduced astigmatism in the optical cavity, allowing operation with a very short Rayleigh range. The laser has been tuned from 0.9 to 3.1 microns using the new wiggler. User experiments commenced in April of 2005 with the FEL Upgrade operating over the 1-3 micron range. We are in the process of installing a 5.5 cm permanent magnet wiggler that will give us even larger tuning range and higher power.

  4. High Power Operation of the JLab IR FEL Driver Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Beard; Stephen Benson; George Biallas; James Boyce; Donald Bullard; James Coleman; David Douglas; H. Dylla; Richard Evans; Pavel Evtushenko; Christopher Gould; Albert Grippo; Joseph Gubeli; David Hardy; Carlos Hernandez-Garcia; J. Hovater; Kevin Jordan; John Klopf; Rui Li; Steven Moore; George Neil; Benard Poelker; Thomas Powers; Joseph Preble; Robert Rimmer; Daniel Sexton; Michelle D. Shinn; Christopher Tennant; Richard Walker; Gwyn Williams; Shukui Zhang

    2007-08-01

    Operation of the JLab IR Upgrade FEL at CW powers in excess of 10 kW requires sustained production of high electron beam powers by the driver ERL. This in turn demands attention to numerous issues and effects, including: cathode lifetime; control of beamline and RF system vacuum during high current operation; longitudinal space charge; longitudinal and transverse matching of irregular/large volume phase space distributions; halo management; management of remnant dispersive effects; resistive wall, wake-field, and RF heating of beam vacuum chambers; the beam break up instability; the impact of coherent synchrotron radiation (both on beam quality and the performance of laser optics); magnetic component stability and reproducibility; and RF stability and reproducibility. We discuss our experience with these issues and describe the modus vivendi that has evolved during prolonged high current, high power beam and laser operation.

  5. A 300-nm compact mm-wave linac FEL design

    Energy Technology Data Exchange (ETDEWEB)

    Nassiri, A.; Kustom, R.L.; Kang, Y.W. [Argonne National Lab., IL (United States)

    1995-12-31

    Microfabrication technology offers an alternative method for fabricating precision, miniature-size components suitable for use in accelerator physics and commercial applications. The original R&D work at Argonne, in collaboration with the University of Illinois at Chicago, has produced encouraging results in the area of rf accelerating structure design, optical and x-ray masks production, deep x-ray lithography (LIGA exposures), and precision structural alignments. In this paper we will present a design study for a compact single pass mm-linac FEL to produce short wavelength radiation. This system will consists of a photocathode rf gun operated at 30 GHz, a 50-MeV superconducting constant gradient structure operated at 60 GHz, and a microundulator with 1-mm period. Initial experimental results on a scale model rf gun and microundulator will be presented.

  6. Maturity Models Development in IS Research

    DEFF Research Database (Denmark)

    Lasrado, Lester Allan; Vatrapu, Ravi; Andersen, Kim Normann

    2015-01-01

    Maturity models are widespread in IS research and in particular, IT practitioner communities. However, theoretically sound, methodologically rigorous and empirically validated maturity models are quite rare. This literature review paper focuses on the challenges faced during the development...... literature reveals that researchers have primarily focused on developing new maturity models pertaining to domain-specific problems and/or new enterprise technologies. We find rampant re-use of the design structure of widely adopted models such as Nolan’s Stage of Growth Model, Crosby’s Grid, and Capability...... Maturity Model (CMM). Only recently have there been some research efforts to standardize maturity model development. We also identify three dominant views of maturity models and provide guidelines for various approaches of constructing maturity models with a standard vocabulary. We finally propose using...

  7. Collaborative Engineering for Research and Development

    Science.gov (United States)

    Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.

    2004-01-01

    Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

  8. Home economics in development through action research

    DEFF Research Database (Denmark)

    Benn, Jette

    2010-01-01

    This research study aimed at describing and developing home economics education through an action research approach in 2 schools and classes grade 6. The study went through 3 phases, an explorative phase with preliminary observations, interviews and discussions with teachers and pupils. Next...... in discursive phase changes have been implemented and conducted in accordance with findings. Third phase the explicative phase results were translated into text books for pupil's grade 4 to7 and to a teachers' guide. The subject is analysed theoretical through a model of the subject and research field. Findings...

  9. Research and development for ethylbenzene production

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Mingwei; Sun, Hongmin; Shen, Zhenhao; Zhang, Bin; Yang, Weimin [SINOPEC Shanghai Research Institute of Petrochemical Technology (China); Huan, Mingyao

    2013-11-01

    Ethylbenzene (EB) is important raw material for the production of styrene. Now, EB is mainly produced by the alkylation of benzene with ethylene catalyzed by zeolite in vapour phase or liquid phase. Shanghai Research Institute of Petrochemical Technology (SRIPT) began to research the catalysts for the production of ethylbenezene in 1993. With near 20 years work, three series of catalysts for the alkylation of benzene with pure ethylene, dilute ethylene and ethanol are in commerical in China. This paper mainly introduced the research and development of SRIPT for the EB production. (orig.)

  10. Dielectric Wakefield Accelerator to drive the future FEL Light Source.

    Energy Technology Data Exchange (ETDEWEB)

    Jing, C.; Power, J.; Zholents, A. (Accelerator Systems Division (APS)); ( HEP); (LLC)

    2011-04-20

    X-ray free-electron lasers (FELs) are expensive instruments and a large part of the cost of the entire facility is driven by the accelerator. Using a high-energy gain dielectric wake-field accelerator (DWA) instead of the conventional accelerator may provide a significant cost saving and reduction of the facility size. In this article, we investigate using a collinear dielectric wakefield accelerator to provide a high repetition rate, high current, high energy beam to drive a future FEL x-ray light source. As an initial case study, a {approx}100 MV/m loaded gradient, 850 GHz quartz dielectric based 2-stage, wakefield accelerator is proposed to generate a main electron beam of 8 GeV, 50 pC/bunch, {approx}1.2 kA of peak current, 10 x 10 kHz (10 beamlines) in just 100 meters with the fill factor and beam loading considered. This scheme provides 10 parallel main beams with one 100 kHz drive beam. A drive-to-main beam efficiency {approx}38.5% can be achieved with an advanced transformer ratio enhancement technique. rf power dissipation in the structure is only 5 W/cm{sup 2} in the high repetition rate, high gradient operation mode, which is in the range of advanced water cooling capability. Details of study presented in the article include the overall layout, the transform ratio enhancement scheme used to increase the drive to main beam efficiency, main wakefield linac design, cooling of the structure, etc.

  11. Coherent harmonic production using a two-section undulator FEL

    Energy Technology Data Exchange (ETDEWEB)

    Jaroszynski, D.A. [Commissariat a l`Energie, Bruyeres-le-Chatel (France); Prazeres, R.; Glotin, F. [Centre Universitaire Paris-Sud (France)] [and others

    1995-12-31

    We present measurements and a theoretical analysis of a new method of generating harmonic radiation in a free-electron laser oscillator with a two section undulator in a single optical cavity. To produce coherent harmonic radiation the undulator is arranged so that the downstream undulator section resonance frequency matches a harmonic of the upstream undulator. Both the fundamental and the harmonic optical fields evolve in the same optical cavity and are coupled out with different extraction fractions using a hole in one of the cavity mirrors. We present measurements that show that the optical power at the second and third harmonic can be enhanced by more than an order of magnitude in this fundamental/harmonic configuration. We compare the production of harmonic radiation of a two sectioned fundamental/harmonic undulator with that produced from a FEL operating at its highest efficiency with a step-tapered undulator, where the bunching at the end of the first section is very large. We examine, the dependence of the harmonic power on the intracavity power by adjusting the optical cavity desynchronism, {delta}L. We also examine the evolution of the fundamental and harmonic powers as a function of cavity roundtrip number to evaluate the importance of the small signal gain at the harmonic. We compare our measurements with predictions of a multi-electron numerical model that follows the evolution of fundamental and harmonic power to saturation. This fundamental/harmonic mode, of operation of the FEL may have useful applications in the production of coherent X-ray and VUV radiation, a spectral range where high reflectivity optical cavity mirrors are difficult or impossible to manufacture.

  12. Cooperative research and development agreements at METC

    Energy Technology Data Exchange (ETDEWEB)

    Ludlow, J.C.; Jarr, L.A.; Anderson, R.J.

    1995-06-01

    The Federal Technology Transfer Act of 1986 (P.L. 99-502) provided a new mechanism for joint research between private parties and the Morgantown Energy Technology Center (METC). Joint projects under this law are called Cooperative Research And Development Agreements (CRADAs) and are simply agreements between METC and the private sector to work together on a mutually beneficial project. Of primary interest to METC is the development and deployment of: (1) clean, efficient power generation technologies, (2) technologies for the characterization and exploitation of the Nation`s natural gas resource, and (3) environmental remediation technologies.

  13. Research related to variable sweep aircraft development

    Science.gov (United States)

    Polhamus, E. C.; Toll, T. A.

    1981-01-01

    Development in high speed, variable sweep aircraft research is reviewed. The 1946 Langley wind tunnel studies related to variable oblique and variable sweep wings and results from the X-5 and the XF1OF variable sweep aircraft are discussed. A joint program with the British, evaluation of the British "Swallow", development of the outboard pivot wing/aft tail configuration concept by Langley, and the applied research program that followed and which provided the technology for the current, variable sweep military aircraft is outlined. The relative state of variable sweep as a design option is also covered.

  14. Research and development in health education

    DEFF Research Database (Denmark)

    Wistoft, Karen

    2009-01-01

    Health professionals working in the field of health promotion and education experience certain value conflicts: their professional and personal values, the values of their clients or of the health services clash with pedagogic values such as participation, involvement, learning and competence...... development. My educational research is concerned with the exploration and development of the knowledge about values and health education related to competence development among health professionals. The purpose is to contribute to systematic knowledge development with a view to support and diversify...... the significance that is founded in theory and relevant to the practice of working with values within various cultures and selected settings: schools, local communities, educational institutions and political organisations. The research moreover aims to diversify a number of more general concepts and connections...

  15. Research and development in health education

    DEFF Research Database (Denmark)

    Wistoft, Karen

    2009-01-01

    Health professionals working in the field of health promotion and education experience certain value conflicts: their professional and personal values, the values of their clients or of the health services clash with pedagogic values such as participation, involvement, learning and competence...... development. My educational research is concerned with the exploration and development of the knowledge about values and health education related to competence development among health professionals. The purpose is to contribute to systematic knowledge development with a view to support and diversify...... the significance that is founded in theory and relevant to the practice of working with values within various cultures and selected settings: schools, local communities, educational institutions and political organisations. The research moreover aims to diversify a number of more general concepts and connections...

  16. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  17. Quasi-real-time photon pulse duration measurement by analysis of FEL radiation spectra

    Energy Technology Data Exchange (ETDEWEB)

    Engel, Robin, E-mail: robin.engel@uni-oldenburg.de [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Institut für Physik, Carl von Ossietzky Universität Oldenburg, D-26111 Oldenburg (Germany); Institut für Laser und Optik, Hochschule Emden/Leer, University of Applied Sciences, Constantiaplatz 4, D-26723 Emden (Germany); Düsterer, Stefan; Brenner, Günter [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Teubner, Ulrich [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22603 Hamburg (Germany); Institut für Physik, Carl von Ossietzky Universität Oldenburg, D-26111 Oldenburg (Germany); Institut für Laser und Optik, Hochschule Emden/Leer, University of Applied Sciences, Constantiaplatz 4, D-26723 Emden (Germany)

    2016-01-01

    Considering the second-order spectral correlation function of SASE-FEL radiation allows a real-time observation of the photon pulse duration during spectra acquisition. For photon diagnostics at free-electron lasers (FELs), the determination of the photon pulse duration is an important challenge and a complex task. This is especially true for SASE FELs with strongly fluctuating pulse parameters. However, most techniques require an extensive experimental setup, data acquisition and evaluation time, limiting the usability in all-day operation. In contrast, the presented work uses an existing approach based on the analysis of statistical properties of measured SASE FEL spectra and implements it as a software tool, integrated in FLASH’s data acquisition system. This allows the calculation of the average pulse durations from a set of measured spectral distributions with only seconds of delay, whenever high-resolution spectra are recorded.

  18. About the scheme of the infrared FEL system for the accelerator based on HF wells

    Energy Technology Data Exchange (ETDEWEB)

    Kabanov, V.S.; Dzergach, A.I. [Moscow Radiotechnical Institute (Russian Federation)

    1995-12-31

    Accelerators, based on localization of plasmoids in the HF wells (RF traps) of the axially-symmetric electromagnetic field E {sub omn} in an oversized (m,n>>1) resonant system, can give accelerating gradients {approximately}100 kV/{lambda}, e.g. 10 GV/m if {lambda}=10 {mu}m. One of possible variants of HF feeding for these accelerators is based on using the powerful infrared FEL System with 2 frequencies. The corresponding FEL`s may be similar to the Los Alamos compact Advanced FEL ({lambda}{sub 1,2}{approximately}10 pm, e-beam energy {approximately}15 MeV, e-beam current {approximately}100 A). Their power is defined mainly by the HF losses in the resonant system of the supposed accelerator.

  19. Future Perspectives of Pharmaceutical Research and Development

    OpenAIRE

    Shein-Chung Chow; Fuyu Song

    2015-01-01

    As more and more innovative drug products (e.g., chemical drug and biological drug products) are going off patent protection, the development of generics/biosimilars products have become the center of attention of many pharmaceutical companies. In addition, as new drug research and development has reached the bottle-neck, the pharmaceutical industry begin to focus on the search for new or alternative medicines such as traditional Chinese medicine that can treat critical and/or life-threatenin...

  20. Research and Development of Advanced Gas Turbine

    OpenAIRE

    1989-01-01

    The program “Advanced Gas Turbine” successfully completed in FY 1987, having been started in FY 1978 as a part of the “Moonlight Project”, the National research and development program for energy conservation promoted by the Agency of Industrial Science and Technology, the Ministry of International Trade and Industry. The purpose of this program was to establish the technologies for the combined cycle power generation system, which has an overall thermal efficiency of 55% (LHV), by developing...

  1. Towards Sustainable Research Capacity Development and Research Ownership for Academic Institutes in Developing Countries: The Malawian Research Support Centre Model

    Science.gov (United States)

    Gomo, Exnevia; Kalilani, Linda; Mwapasa, Victor; Trigu, Chifundo; Phiri, Kamija; Schmidt, Joann; van Hensbroek, Michael Boele

    2011-01-01

    In lesser-developed African countries, the lack of institutionalised support for research, combined with limited career opportunities and poor remuneration, have contributed to weak research infrastructure and capacity, and a continuing brain drain to developed countries. Malawi's Research Support Centre (RSC) model is novel in that it provides a…

  2. Development of Software Engineering: A Research Perspective

    Institute of Scientific and Technical Information of China (English)

    Hong Mei; Dong-Gang Cao; Fu-Qing Yang

    2006-01-01

    In the past 40 years, software engineering has emerged as an important sub-field of computer science and has made significant contribution to the software industry. Now it is gradually becoming a new independent discipline. This paper presents a survey of software engineering development from a research perspective. Firstly, the history of software engineering is reviewed with focus on the driving forces of software technology, the software engineering framework and the milestones of software engineering development. Secondly, after reviewing the past academic efforts, the current research activities are surveyed and new challenges brought by Internet are analyzed. Software engineering researches and activities in China are also reviewed. The work in Peking University is described as a representative.

  3. Tradeoffs in Design Research: Development Oriented Triangulation

    NARCIS (Netherlands)

    Turnhout, Koen van; Craenmehr, Sabine; Holwerda, Robert; Menijn, Mark; Zwart, Jan-Pieter; Bakker, René

    2013-01-01

    The Development Oriented Triangulation (DOT) framework in this paper can spark and focus the debate about mixed-method approaches in HCI. The framework can be used to classify HCI methods, create mixed-method designs, and to align research activities in multidisciplinary projects. The framework is g

  4. Tradeoffs in Design Research: Development Oriented Triangulation

    NARCIS (Netherlands)

    Jan-Pieter Zwart; René Bakker; Robert Holwerda; Mark Menijn; Koen van Turnhout; Sabine Craenmehr

    2013-01-01

    The Development Oriented Triangulation (DOT) framework in this paper can spark and focus the debate about mixed-method approaches in HCI. The framework can be used to classify HCI methods, create mixed-method designs, and to align research activities in multidisciplinary projects. The framework is

  5. Research and Development Needs of Vocational Education.

    Science.gov (United States)

    Lewis, Morgan V., Ed.

    Intended to provide information on applied research and development (R&D) priorities in vocational education and on the type of R&D required for each need, this report is divided into (1) an introduction to the problem and procedures, (2) a content analysis of selected documents, and (3) background papers for selected need areas. Chapter 1…

  6. Agricultural Biotechnology Research and Development in Hunan

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Recent agricultural biotechnology research and advances in the province are reviewed. Targets and practices for biotechnological development in depth are discussed, with stress on the talent's training, new techniques' establishment and its industrialization, starting from the existing level and problems in the field in the province.

  7. Fuel Fabrication Capability Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J.; Burkes, Douglas

    2013-06-28

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative (GTRI) Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors.

  8. Are Project Developers Knights and Researchers Queens?

    DEFF Research Database (Denmark)

    Vinstrup, Anya Bjørn

    2014-01-01

    How do project developers at universities view their customers – the researchers, and how do they see themselves as a profession? Does this view influence their motivation and what challenges does it impose? Taking elements of theory from Public Service Motivation (PSM) and linking it with a smal...... for leadership and organisational structures....

  9. Concept development for HLW disposal research tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Queon, S. K.; Kim, K. S.; Park, J. H.; Jeo, W. J.; Han, P. S. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    In order to dispose high-level radioactive waste in a geological formation, it is necessary to assess the safety of a disposal concept by excavating a research tunnel in the same geological formation as the host rock mass. The design concept of a research tunnel depends on the actual disposal concept, repository geometry, experiments to be carried at the tunnel, and geological conditions. In this study, analysis of the characteristics of the disposal research tunnel, which is planned to be constructed at KAERI site, calculation of the influence of basting impact on neighbor facilities, and computer simuation for mechanical stability analysis using a three-dimensional code, FLAC3D, had been carried out to develop the design concept of the research tunnel.

  10. Competence Development among mentors: An Action Research

    DEFF Research Database (Denmark)

    Kragelund, Linda

    2014-01-01

    this framework. The analytical approach was qualitative content analysis. Results were not entirely as expected; they showed that when the tools were used as in the research design, mentors felt they benefitted and evidence indicated their competence would improve. Surprisingly, most mentors did not perform......Artiklen er blevet dobbelt blind reviewet og jeg er i gang med at rette den til. This article presents results about student nurse mentors' competence development in relation to exploiting learning opportunities in everyday life activities in hospital wards. They are from the Danish action research...... about them. The research used the concept of 'pseudo-everyday life activities' in which hitherto undiscovered learning opportunities in everyday situations can be exploited, alongside Lauvås and Handal's 'Mentoring loop'. The research sought to establish how mentors’ competence could be improved using...

  11. Planar undulator motion excited by a fixed traveling wave. Quasiperiodic averaging normal forms and the FEL pendulum

    Energy Technology Data Exchange (ETDEWEB)

    Ellison, James A.; Heinemann, Klaus [New Mexico Univ., Albuquerque, NM (United States). Dept. of Mathematics and Statistics; Vogt, Mathias [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany); Gooden, Matthew [North Carolina State Univ., Raleigh, NC (United States). Dept. of Physics

    2013-03-15

    We present a mathematical analysis of planar motion of energetic electrons moving through a planar dipole undulator, excited by a fixed planar polarized plane wave Maxwell field in the X-Ray FEL regime. Our starting point is the 6D Lorentz system, which allows planar motions, and we examine this dynamical system as the wave length {lambda} of the traveling wave varies. By scalings and transformations the 6D system is reduced, without approximation, to a 2D system in a form for a rigorous asymptotic analysis using the Method of Averaging (MoA), a long time perturbation theory. The two dependent variables are a scaled energy deviation and a generalization of the so- called ponderomotive phase. As {lambda} varies the system passes through resonant and nonresonant (NR) zones and we develop NR and near-to-resonant (NtoR) MoA normal form approximations. The NtoR normal forms contain a parameter which measures the distance from a resonance. For a special initial condition, for the planar motion and on resonance, the NtoR normal form reduces to the well known FEL pendulum system. We then state and prove NR and NtoR first-order averaging theorems which give explicit error bounds for the normal form approximations. We prove the theorems in great detail, giving the interested reader a tutorial on mathematically rigorous perturbation theory in a context where the proofs are easily understood. The proofs are novel in that they do not use a near identity transformation and they use a system of differential inequalities. The NR case is an example of quasiperiodic averaging where the small divisor problem enters in the simplest possible way. To our knowledge the planar prob- lem has not been analyzed with the generality we aspire to here nor has the standard FEL pendulum system been derived with associated error bounds as we do here. We briefly discuss the low gain theory in light of our NtoR normal form. Our mathematical treatment of the noncollective FEL beam dynamics problem in

  12. 1999 LDRD Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Rita Spencer; Kyle Wheeler

    2000-06-01

    This is the FY 1999 Progress Report for the Laboratory Directed Research and Development (LDRD) Program at Los Alamos National Laboratory. It gives an overview of the LDRD Program, summarizes work done on individual research projects, relates the projects to major Laboratory program sponsors, and provides an index to the principal investigators. Project summaries are grouped by their LDRD component: Competency Development, Program Development, and Individual Projects. Within each component, they are further grouped into nine technical categories: (1) materials science, (2) chemistry, (3) mathematics and computational science, (4) atomic, molecular, optical, and plasma physics, fluids, and particle beams, (5) engineering science, (6) instrumentation and diagnostics, (7) geoscience, space science, and astrophysics, (8) nuclear and particle physics, and (9) bioscience.

  13. Expected properties of the radiation from VUV-FEL at DESY femtosecond mode of operation

    CERN Document Server

    Saldin, E L; Yurkov, M V

    2004-01-01

    For the next three years the nominal "long pulse" (200 fs) mode of FEL operation at VUV-FEL, based on a linearized bunch compression, is not available due to the lack of a key element - a 3rd harmonic RF cavity. Essentially nonlinear compression leads naturally to a formation of a short high-current leading peak (spike) in the density distribution that produces FEL radiation. Such a mode of operation was successfully tested at VUV-FEL, Phase I. In this paper we present optimized parameters of the beam formation system that allow us to get a current spike which is bright enough to get SASE saturation for the VUV-FEL, Phase 2 at shortest design wavelength down to 6 nm. The main feature of the considered mode of operation is the production of short (15-50 fs FWHM) radiation pulses with GW-level peak power that are attractive for many users. Main parameters of the SASE FEL radiation (temporal and spectral characteristics, intensity distributions, etc.) are presented, too.

  14. A HIGH REPETITION RATE VUV-SOFT X-RAY FEL CONCEPT

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, J.; Byrd, J.; Fawley, W.M.; Gullans, M.; Li, D.; Lidia,S.M.; Padmore, H.; Penn, G.; Pogorelov, I.; Qiang, J.; Robin, D.; Sannibale, F.; Staples, J.W.; Steier, C.; Venturini, M.; Virostek, S.; Wan, W.; Wells, R.; Wilcox, R.; Wurtele, J.; Zholents, A.

    2007-06-24

    We report on design studies for a seeded FEL light source that is responsive to the scientific needs of the future. The FEL process increases radiation flux by several orders of magnitude above existing incoherent sources, and offers the additional enhancements attainable by optical manipulations of the electron beam: control of the temporal duration and bandwidth of the coherent output, reduced gain length in the FEL, utilization of harmonics to attain shorter wavelengths, and precise synchronization of the x-ray pulse with seed laser systems. We describe an FEL facility concept based on a high repetition rate RF photocathode gun, that would allow simultaneous operation of multiple independent FEL's, each producing high average brightness, tunable over the VUV-soft x-ray range, and each with individual performance characteristics determined by the configuration of the FEL. SASE, enhanced-SASE (ESASE), seeded, harmonic generation, and other configurations making use of optical manipulations of the electron beam may be employed, providing a wide range of photon beam properties to meet varied user demands.

  15. Advanced heat pump research and development

    Science.gov (United States)

    Kuliasha, M. A.

    The Office of Building Energy Research and Development of the U.S. Department of Energy (DOE), has been funding R&D in advanced heat pumps and appliances since 1976. Much of that research has been managed for DOE by the Oak Ridge National Laboratory (ORNL). The objective of the Building Equipment Research (BER) program at ORNL has been to generate new concepts and develop a technology base for improving the energy efficiency and load characteristics of energy conversion equipment used in residential and commercial buildings. The research being pursued to achieve these objectives falls under three general areas: thermally activated heat pumps (TAHP), refrigeration systems, and building equipment systems. The TAHP work is concentrated on three technologies: (1) absorption heat pumps; (2) Stirling engine-driven heat pumps; and (3) internal combustion (IC) engine-driven heat pumps. Major project areas in refrigeration systems research include electric heat pumps, ground-coupled heat pumps, and refigerant mixtures. In the building equipment systems areas, project areas include advanced distribution systems, advanced insulation for appliances, and commercial building equipment.

  16. IT roadmap requirements for research and development

    Energy Technology Data Exchange (ETDEWEB)

    Geyer, Leslie J [Los Alamos National Laboratory; Kinkead, Susan F [Los Alamos National Laboratory

    2010-01-01

    In 2009, members representing the programmatic community of the Laboratory presented a request to the Information Architecture Steering Committee (IASC) to form a committee within the Information Architecture Program (IAP) to review and consider the needs of researchers. In response, a Research and Development Subteam under the Infrastructure Team was created. Members included volunteer representatives of groups performing research and development throughout the Laboratory. This paper represents the product of this review. The R&D computing environment has languished while Los Alamos has been very compliance driven for the past few years under a set of directives that have eliminated our ability to innovate and to push the envelope of R&D computing. The appeal for outside collaborations is rapidly becoming tarnished, as colleagues from outside the NNSA environment view our restrictions as increasingly oppressive. We are losing the ability to conduct cutting-edge research and losing money to competitors who are able to quickly react and pursue program dollars while we are still creating compliant but less than useful computing solutions. Research programs depend on collaboration, employees, foreign nationals, and frequent travel, including travel to foreign countries. Solutions need to facilitate these activities and be based on the risk that the activities actually pose to the infrastructure and data at LANL. Furthermore, when problems are solved, it is essential that the solutions are evaluated for cost/benefit to the programs, that programmatic impact is well identified, and that solutions have sufficient long term resource for collaborations.

  17. Active FEL-Klystrons as Formers of Femto-Second Clusters of Electromagnetic Field. Description of the Models Based on “Ordinary” FEL Sections

    Directory of Open Access Journals (Sweden)

    V.V. Kulish

    2010-01-01

    Full Text Available The qualitative properties discussion of the Femto-second active cluster FEL-klystrons, which are designed on the basis of “ordinary” FEL sections, is performed. Theoretical models of two different types of such devices are proposed. The main difference between them consists in the acceleration block arrangement. Namely, in the model with intermediate acceleration, a part of the acceleration sections is placed between the modulation and energy-transformation sections. The formulation of the problem is done. The basic system of truncated equations (in the cubic-nonlinear approximation for the complex amplitudes of harmonics of resonantly-interacting waves is obtained.

  18. Institutional research and development, FY 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The Laboratory's Institutional Research and Development (IR and D) Program was established in 1984 to foster exploratory work to advance science and technology, disciplinary research to develop innovative solutions to support our national defense and energy missions. In FY 1988, the IR and D Program was funded by a 2% assessment on the Laboratory's operating budget. Our policy is to use these funds for researching innovative ideas in LLNL's areas of expertise and for developing new areas of expertise that we perceive to be in the national interest. The technical and scientific accomplishments of each project and of each institute funded this year are presented in this report. The projects were selected because they are expected to advance research in important areas that are too basic or too time consuming to be funded by the developmental programs or because they are somewhat risky projects that have the promise of high payoff. We are continually reappraising the IR and D Program. In particular, we seek new candidates for the Director's Initiatives, and we constantly reassess the work in progress. Each year, we make adjustments to further the Laboratory's policy of using the IR and D Program to fund innovative ideas with high potential for enhancing programmatic activities of national importance.

  19. Research and development program, fiscal year 1966

    Energy Technology Data Exchange (ETDEWEB)

    1964-04-01

    The biomedical program of the Laboratory of Nuclear Medicine and Radiation Biology for FY 1966 is conducted within the scope of the following categories: Somatic Effects of Radiation; Combating Detrimental Effects of Radiation; Molecular and Cellular Level Studies; Environmental Radiation Studies; Radiological and Health Physics and Instrumentation; Chemical Toxicity; Cancer Research; and Selected Beneficial Applications. The overall objectives of the Laboratory within these areas of the Biology and Medicine program may be summarized as follows: (1) investigation of the effects of ionizing radiation on living organisms and systems of biological significance; (2) investigation of the dynamic aspects of physiological and biochemical processes in man, animals and plants and how these processes are modified by radiation and related pathological states; (3) the assessment and study of the immediate and long term consequences of the operation or detonation of nuclear devices on the fauna, and flora in man's environment and on man; (4) the development of methods of minimizing or preventing the detrimental effects of ionizing radiation; (5) research in, and development of, beneficial uses of ionizing radiation and radioactive substances in medicine and biology; (6) research in the development of new and more efficient radiation detection devices; (7) research, including field studies, as mutually agreed upon by the Commission and the University, in connection with the conduct of weapon tests and biomedical and civil effects experiments at such tests conducted at continental and overseas test sites; and (8) the conduct of training and educational activities in the biological and medical aspects of radiation and related fields.

  20. Exploratory research and development FY90

    Energy Technology Data Exchange (ETDEWEB)

    Struble, G.L.; Middleton, C.; Baldwin, G.; Cherniak, J.; Clements, W.; Donohue, M.L.; Francke, A.; Kirvel, R.D.; MacGregor, P.; Shaw, G. (eds.)

    1990-01-01

    In general, the Exploratory Research and Development (ER D) Program supports research projects considered too basic or long-range to be funded by other Lawrence Livermore National Laboratory (LLNL) programs. This Program is managed for the Laboratory Director by a special assistant who chairs the LLNL's IR D Review Committee. Membership in the Review Committee comprises senior LLNL scientists, engineers, and managers whose areas of expertise span the range of scientific disciplines pursued at the Laboratory. The research supported by the Program falls into three categories: Exploratory Research in the Disciplines, Director's Initiatives, and Laboratory-Wide Competition. The first two, Exploratory Research and Director's Initiatives, promote pioneering work in the various scientific disciplines and programmatic areas. Laboratory departments and divisions propose and manage projects in the Exploratory Research category. The Laboratory Director, with the advice of the Review Committee, selects several larger projects to fund as Director's Initiative. These projects, which are proposed and managed by the responsible associate director, are intended to enhance the scope of existing programs or establish new technical directions and programs for the Laboratory. All FY90 projects are described in detail in this report. Other publications on ER D projects are included in the Publications List at the back of this report.

  1. Felípica, capital de la monarquia (propuestas de Pérez de Herrera para Madrid

    Directory of Open Access Journals (Sweden)

    Dolores González de la Fuente

    2002-01-01

    Full Text Available En una época de crisis donde se tambalea la hegemonía de la monarquía hispánica, Chstóbal Pérez de Herrera propone un ambicioso proyecto encaminado a sanear la soüedad cuya imagen visible será su capital, un nuevo Madrid renovado hasta en su denominación, Felípica, la corte de los Austrias españoles, en la que arquitectura y urbanismo puestos al servicio del poder político crearán el marco ideal donde se desarrolle la vida cortesana.In a period of cnsis in which the hegemony of the monarchy is in danger. Cristóbal Pérez de Herrera suggests an ambitions project designed to insure a society whose visible image will be its capital: a new and reorganized Madrid, renewed even In its ñame «Felípica», it will be the court of the Spanish Austrias, where architecture and urban development are at the disposal of the political authorities to créate the ideal framework where the Ufe of the Court will develop.

  2. Developing a Model for Continuous Professional Development by Action Research

    Science.gov (United States)

    Herbert, Susan; Rainford, Marcia

    2014-01-01

    This paper presents a case study of the work of two teacher educators with an in-service science teacher. This case study forms one cycle of a larger action research study that will eventually lead to a model of how the third-space concept for teacher professional development can be realized in natural school settings. The case study took place in…

  3. Laboratory Directed Research and Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Ogeka, G.J.

    1991-12-01

    Today, new ideas and opportunities, fostering the advancement of technology, are occurring at an ever-increasing rate. It, therefore, seems appropriate that a vehicle be available which fosters the development of these new ideas and technologies, promotes the early exploration and exploitation of creative and innovative concepts, and which develops new fundable'' R D projects and programs. At Brookhaven National Laboratory (BNL), one such method is through its Laboratory Directed Research and Development (LDRD) Program. This discretionary research and development tool is critical in maintaining the scientific excellence and vitality of the Laboratory. Additionally, it is a means to stimulate the scientific community, fostering new science and technology ideas, which is the major factor achieving and maintaining staff excellence, and a means to address national needs, with the overall mission of the Department of Energy (DOE) and the Brookhaven National Laboratory. The Project Summaries with their accomplishments described in this report reflect the above. Aside from leading to new fundable or promising programs and producing especially noteworthy research, they have resulted in numerous publications in various professional and scientific journals, and presentations at meetings and forums.

  4. 8-channel, FPGA based, DSP integrated cavity simulator and controller for VUV-FEL. SIMCON 3.0 Ver. 3.0. rev. 1, 06.2005 - Hardware manual

    Energy Technology Data Exchange (ETDEWEB)

    Pozniak, K.T.; Czarski, T.; Koprek, W.; Giergusiewicz, W.; Romaniuk, R.S. [Warsaw Univ. of Technology (Poland). Inst. of Electronic Systems ELHEP Laboratory

    2005-07-01

    The note describes integrated, eight channel system of hardware controller and simulator of the resonant superconducting, narrowband niobium cavity, originally considered for the TTF and TESLA in DESY, Hamburg (now tested for the VUV FEL and developed for X-Ray FEL). The controller bases on a programmable circuit Xilinx VirtexII V4000. The solution uses DSP EMBEDDED BOARD module positioned on a Modular LLRF Control Platform. The algorithm and FPGA circuit configuration was done in the VHDL language. The internal hardware multiplication components, present in Virtex II chips, were used, to improve the floating point calculation efficiency. The implementation was achieved of a device working in the real time, according to the demands of the LLRF control system for the TESLA Test Facility (now associated with the VUV FEL machine). The device under consideration will be referred to as superconducting cavity (SCCav) SIMCON throughout this work. The manual describes hardware features of SIMCON, ver. 3.0 in modular solution. The following components are described here in detail: functional layer, parameter programming, foundations of control of particular blocks and monitoring of the real time processes. This note is accompanied by the one describing the multichannel DOOCS interface for the described hardware system. The interface was prepared in DOOCS for Solaris and in Windows. The hardware and software of 8-channel SIMCON was tested in CHECIA and ACC1 module of VUV FEL linac. The measurements results are presented. While giving all necessary technical details required to understand the work of the integrated hardware controller and simulator and to enable its practical copying, this document is a unity with other TESLA technical notes published by the same team on the subject. Thus, some modeling and other subjects were omitted, as they were addressed in detail in the quoted references. Keywords: Super conducting cavity, cavity simulator, CAVITIES CONTROLLER, SIMCON

  5. Improvement of the beam quality by chromaticity correction for wavelength shortening in the NIJI-IV FEL

    CERN Document Server

    Sei, N; Ohgaki, H; Litvinenko, V N; Mikado, T; Yamazaki, T

    1999-01-01

    Electron-beam qualities improved by chromaticity correction in the storage ring NIJI-IV were investigated at the beam energy of 309 MeV. Sextupole-quadrupole-sextupole (SQS) magnets, which were installed in all of the short-straight sections in NIJI-IV, perfectly corrected a horizontal and a vertical chromaticity. This improvement suppressed a head-tail instability, so that higher beam current (approx 30 mA) and higher peak-electron density (approx 6x10 sup 1 sup 6 m sup - sup 3) were available for FEL experiments. The maximum FEL gain was estimated to be about 2.5% at a wavelength of 240 nm. The lasing of an FEL around 300 nm was achieved in March 1998, and the lasing of an FEL at around 240 nm was successfully observed in May 1998. The shortest wavelength of FELs with the NIJI-IV FEL system was 228 nm.

  6. SUSTAINABLE DEVELOPMENT: RESEARCH IN AN INTERCULTURAL CONTEXT

    Directory of Open Access Journals (Sweden)

    Roland Ebel

    2011-01-01

    Full Text Available Although there are various well argued definitions about what sustainable development means, there is a lack ofinformation about its meaning in the particular context of anintercultural university. Generally, sustainability is a goal which could never be obtained completely; sustainability is an ideal while sustainable development means all concrete humans attempts to obtain such goal. There is a direct link between human needs and sustainable development. Therefore, the popular concept of describing sustainable development as an absolutely valid objective for everybody is an illusion. It is based on the failed idea that humanity counts with universal needs. However, this is only correct for the most basic human needs. Except of these basic requirements, there is huge amplitude of very diverse human needs, especially in socio-economic and socio-cultural belongings. The more populated the community to be evaluated is, the more difficult becomes to determine common interests and therefore the more representative evaluation becomes. In other words, sustainable development must be seen as a subjective process – always depending on the persons defining their own needs. This is a factor which definitely complicates measuring; on the other hand it forces researches to take position: they have to declare which subjects have the privilege to determine such needs. In the case of the intercultural universities, the selection of the determinants of sustainable development requires a profound knowledge of the rural communities which usually - in an occidental point of view - do not show huge social-economic variety, but well count with a diverse spectrum of nuances within their habitants, especially valid for political and socio-cultural aspects. This is why it is necessary to establish well developed links between researchers and the population of these small rural communities – a process which requires an ambient of reliance resulting from deep

  7. Home economics in development through action research

    DEFF Research Database (Denmark)

    Benn, Jette

    2010-01-01

    This research study aimed at describing and developing home economics education through an action research approach in 2 schools and classes grade 6. The study went through 3 phases, an explorative phase with preliminary observations, interviews and discussions with teachers and pupils. Next...... in discursive phase changes have been implemented and conducted in accordance with findings. Third phase the explicative phase results were translated into text books for pupil's grade 4 to7 and to a teachers' guide. The subject is analysed theoretical through a model of the subject and research field. Findings...... and suggestions were discussed in relation to theories of learning, education and home economics. The overall perspectives were to involve pupils, to make them responsible by active and critical participation, and lastly to evaluate education in different ways....

  8. Laboratory Directed Research and Development FY 2000

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Todd; Levy, Karin

    2001-02-27

    The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. Annual report on Laboratory Directed Research and Development for FY2000.

  9. Maturity Models Development in IS Research

    DEFF Research Database (Denmark)

    Lasrado, Lester Allan; Vatrapu, Ravi; Andersen, Kim Normann

    2015-01-01

    literature reveals that researchers have primarily focused on developing new maturity models pertaining to domain-specific problems and/or new enterprise technologies. We find rampant re-use of the design structure of widely adopted models such as Nolan’s Stage of Growth Model, Crosby’s Grid, and Capability...... of maturity models. Specifically, it explores maturity models literature in IS and standard guidelines, if any to develop maturity models, challenges identified and solutions proposed. Our systematic literature review of IS publications revealed over hundred and fifty articles on maturity models. Extant...

  10. Oil heat technology research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kweller, E.R. [Department of Energy, Washington, DC (United States); McDonald, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    The purpose of this United States Department of Energy (DOE)/Brookhaven National Laboratory (BNL) program is to develop a technology base for advancing the state-of-the-art related to oilfired combustion equipment. The major thrust is through technology based research that will seek new knowledge leading to improved designs and equipment optimization. The Combustion Equipment space Conditioning Technology program currently deals exclusively with residential and small commercial building oil heat technology.

  11. Defense Nanotechnology Research and Development Programs

    Science.gov (United States)

    2005-05-17

    that can be dyed to match specific patterns and woven into uniforms. • An electrospun fiberized adhesive has been developed for fabric laminates...150 by 30 crossbars ). • High moment, magnetic nano-tags have been fabricated that allow DNA fingerprinting without DNA amplification (i.e., the... learned , and DoD guidance is critical to assure both the optimum direction of ongoing research efforts and the optimum leveraging of this knowledge to

  12. Planar undulator motion excited by a fixed traveling wave: Quasiperiodic Averaging, normal forms and the FEL Pendulum

    CERN Document Server

    Ellison, James A; Vogt, Mathias; Gooden, Matthew

    2013-01-01

    We present a mathematical analysis of planar motion of energetic electrons moving through a planar dipole undulator, excited by a fixed planar polarized plane wave Maxwell field in the X-Ray Free Electron Laser (FEL) regime. Our starting point is the 6D Lorentz system, which allows planar motions, and we examine this dynamical system as the wavelength of the traveling wave varies. By scalings and transformations the 6D system is reduced, without approximation, to a 2D system in a form for a rigorous asymptotic analysis using the Method of Averaging (MoA), a long time perturbation theory. The two dependent variables are a scaled energy deviation and a generalization of the so-called ponderomotive phase. As the wavelength varies the system passes through resonant and nonresonant (NR) zones and we develop NR and near-to-resonant (NtoR) normal form approximations. For a special initial condition and on resonance, the NtoR normal form reduces to the well-known FEL pendulum system. We then state and prove NR and Nt...

  13. Research and Development Joint Development at CEEE - PUCRS

    Energy Technology Data Exchange (ETDEWEB)

    Haffner, Sergio L. [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre, RS (Brazil). Escola Politecnica; Fagundes, Jose F. de O. [Companhia Estadual de Energia Eletrica do Estado do Rio Grande do Sul, Porto Alegre, RS (Brazil); Dias, Guilherme A.D.; Cecin, Carlos M.

    1994-12-31

    The aim of this work is to present all events realized in Research and Development (R and D) by Companhia Estadual de Energia Eletrica (CEEE) and Pontificia Universidade Catolica do Rio Grande do Sul (PUCRS) in the Electrical Power Systems area. In a brief report it is indicated a chronology of existing cooperation between CEEE and PUCRS, being introduced also the main events of that activity. Finally are showed the main activities performed in the Electrical Power Systems area. (author) 3 refs..

  14. RF coupler for high-power CW FEL photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S. (Sergey); Young, L. M. (Lloyd M.)

    2003-01-01

    A high-current emittance-compensated RF photoinjector is a key enabling technology for a high-power CW FEL. The design presently under way is a 100-mA 2.5-cell {pi}-mode, 700-MHz, normal conducting demonstration CW RF photoinjector. This photoinjector will be capable of accelerating 3 nC per bunch with an emittance at the wiggler less than 10 mm-mrad. The paper presents results for the RF coupling from ridged wave guides to hte photoinjector RF cavity. The LEDA and SNS couplers inspired this 'dog-bone' design. Electromagnetic modeling of the coupler-cavity system has been performed using both 2-D and 3-D frequency-domain calculations, and a novel time-domain approach with MicroWave Studio. These simulations were used to adjust the coupling coefficient and calculate the power-loss distribution on the coupling slot. The cooling of this slot is a rather challenging thermal management project.

  15. A Far-Infrared FEL for the Radiation Source ELBE

    CERN Document Server

    Seidel, W; Lehnert, U; Michel, P; Schlenk, R; Willkommen, U; Wohlfarth, D; Wünsch, R

    2005-01-01

    After successfully commissioning the mid-infrared FEL (U27) and adjoining a second accelerator unit (up to 35 MeV) at ELBE we have modified our plan how to produce radiation in the far infrared.To ensure the continuous variation of the wavelength up to 150 microns we want to complement the U27 undulator by a permanent magnet undulator with a period of 100 mm (U100). The minimum gap of 24 mm and the hybrid construction consisting of Sm/Co magnets and soft iron poles ensures sufficient radiation resistance and allows rms undulator parameters up to 2.7. The large field variation allows us to cover the whole wavelength range by only two different electron energies (e.g. 20 and 35 MeV). To reduce the transverse beam size we use a partial waveguide which is 10 mm high and wide enough to allow free propagation in horizontal direction. It spans from the last quadrupole in front of the undulator up to the downstream mirror and is somewhat longer than 8 m. To minimize the coupling losses between free propagation and th...

  16. Numerical Simulation of HGHG Operation for the SDUV-FEL

    CERN Document Server

    Li, D G; Gu, Q; Xu, Y; Zhao, X F; Zhao, Z

    2005-01-01

    In this paper, we present the numerical simulation for HGHG operation of the Shanghai deep ultra-violet free electron laser source (SDUV-FEL). In this operation, a 264nm seed laser interacts with a 277MeV, 400A, normalized emittance 4mm.rad and local energy spread 0.1% electron beam in the first wiggler(modulator) with period 5cm, total length 0.8m and parameter K=2.03, where the energy of the electron beam is modulated. Then through a dispersion section with dy/dg~6.3, the energy modulation is converted to spatial bunching. In the second wiggler (radiator) with period 2.5cm, total length 10m and parameter K=1.45, the 88nm coherent radiation is generated in the first two gain lengths and its radiation power is exponentially amplified after two gain lengths. The simulation indicates that about several hundred MW 88nm and about few MW 29.3nm radiation can be produced.

  17. Los Alamos High-Brightness Accelerator FEL (HIBAF) facility

    Energy Technology Data Exchange (ETDEWEB)

    Cornelius, W.D.; Bender, S.; Meier, K.; Thode, L.E.; Watson, J.M.

    1989-01-01

    The 10-/mu/m Los Alamos free-electron laser (FEL) facility is being upgraded. The conventional electron gun and bunchers have been replaced with a much more compact 6-MeV photoinjector accelerator. By adding existing parts from previous experiments, the primary beam energy will be doubled to 40 MeV. With the existing 1-m wiggler (/lambda//sub w/ = 2.7 cm) and resonator, the facility can produce photons with wavelengths from 3 to 100 /mu/m when lasing on the fundamental mode and produce photons in the visible spectrum with short-period wigglers or harmonic operation. After installation of a 150/degree/ bend, a second wiggler will be added as an amplifier. The installation of laser transport tubes between the accelerator vault and an upstairs laboratory will provide experimenters with a radiation-free environment for experiments. Although the initial experimental program of the upgraded facility will be to test the single accelerator-master oscillator/power amplifier configuration, some portion of the operational time of the facility can be dedicated to user experiments. 13 refs., 5 figs., 6 tabs.

  18. Extension of the spectral range of the CLIO FEL

    Energy Technology Data Exchange (ETDEWEB)

    Marcouille, O.; Boyer, J.C.; Corlier, M. [LURE, Orsay (France)] [and others

    1995-12-31

    The CLIO FEL has been designed to lase between 2 and 20 {mu}m. The electrons are produced by a 32/50 MeV RF linear accelerator. The injector is a 100 keV thermoionic gun, followed by a subharmonic prebuncher at 0.5 GHz and a buncher at 3 GHz. The electron beam is then accelerated in a 4.5 m long travelling wave accelerating section, to the nominal energy. The undulator consisted of 48 periods of 40 mm and the optical cavity is 4.8 m long which corresponds to a 1.2 m Rayleigh length. The peak power extracted by a ZnSe Brewster plate is 10 MW at 10 {mu}. But, beyond 11{mu}m, the laser power decreases rapidely and no laser oscillation appears above 17 {mu}m. In order to lase at farther wavelengths, few changes have been made: First of all, the power limit is due to the diffraction losses of the undulator vaccuum chamber (7 mm height and 2 m long). Numerical calculations have been made and show that cavity losses reach 55 % at 15 {mu}m whereas the measured gain is 60 %. Consequently, the undulator vaccuum chamber have been replaced by a approximately twice bigger one. Then, the minimum gap is increased and the maximum deflection parameter K is reduced by a factor 2: laser tunability is greatly reduced. This why a new undulator has been built. The main characteristics are summarized.

  19. Development of Global Change Research in Developing Countries

    Science.gov (United States)

    Sierra, Carlos A.; Yepes, Adriana P.

    2010-10-01

    Ecosystems and Global Change in the Context of the Neotropics; Medellín, Colombia, 19-20 May 2010; Research in most areas of global environmental change is overwhelmingly produced outside developing countries, which are usually consumers rather than producers of the knowledge associated with their natural resources. While there have been important recent advances in understanding the causes of global-¬scale changes and their consequences to the functioning of tropical ecosystems, there is still an important gap in the understanding of these changes at regional and national levels (where important political decisions are usually made). A symposium was held with the aim of surveying the current state of research activities in a small, developing country such as Colombia. It was jointly organized by the Research Center on Ecosystems and Global Change, Carbono and Bosques; the National University of Colombia at Medellín and the Colombian Ministry of the Environment, Housing, and Regional Development. This 2-¬day symposium gathered Colombian and international scientists involved in different areas of global environmental change, tropical ecosystems, and human societies.

  20. Instrumentation for Longitudinal Beam Gymnastics in FEL's and at the CLIC Test Facility 3

    CERN Document Server

    Lefèvre, T; Bravin, E; Burger, S; Corsini, R; Döbert, S; Soby, L; Tecker, F A; Urschutz, P; Welsch, C P; Alesini, D; Biscari, C; Buonomo, B; Coiro, O; Ghigo, A; Marcellini, F; Preger, B; Dabrowski, A; Velasco, M; Craievich, P; Ferianis, M; Veronese, M; Ferrari, A

    2008-01-01

    Built at CERN by an international collaboration, the CLIC Test Facility 3 (CTF3) aims at demonstrating the feasibility of a high luminosity 3 TeV e+-e- collider by the year 2010. One of the main issues to be demonstrated is the generation of a high average current (30 A) high frequency (12 GHz) bunched beam by means of RF manipulation. At the same time, Free Electron Lasers (FEL) are developed in several places all over the world with the aim of providing high brilliance photon sources. These machines rely on the production of high peak current electron bunches. The required performances put high demands on the diagnostic equipment and innovative longitudinal monitors have been developed during the past years. This paper gives an overview of the longitudinal instrumentation developed at ELETTRA and CTF3, where a special effort was made in order to implement at the same time non-intercepting devices for online monitoring, and destructive diagnostics which have the advantage of providing more detailed informati...

  1. Research and Development Annual Report, 1992

    Science.gov (United States)

    1993-01-01

    Issued as a companion to Johnson Space Center's Research and Technology Annual Report, which reports JSC accomplishments under NASA Research and Technology Operating Plan (RTOP) funding, this report describes 42 additional JSC projects that are funded through sources other than the RTOP. Emerging technologies in four major disciplines are summarized: space systems technology, medical and life sciences, mission operations, and computer systems. Although these projects focus on support of human spacecraft design, development, and safety, most have wide civil and commercial applications in areas such as advanced materials, superconductors, advanced semiconductors, digital imaging, high density data storage, high performance computers, optoelectronics, artificial intelligence, robotics and automation, sensors, biotechnology, medical devices and diagnosis, and human factors engineering.

  2. Energy research and development profile of Australia

    Energy Technology Data Exchange (ETDEWEB)

    Kenkeremath, L.

    1986-01-01

    Australia is a large, sparsely populated country with an economy based traditionally on raw materials exports. Though still a major international trader in minerals and agricultural products, Australia has suffered a decline in productivity, employment, exports, and economic growth since the 1950s. Most energy research and development (R and D) and policymaking activities are carried out under the National Energy Research, Development, and Demonstration (NERDD) program. The NERDD program priorities include, among others, production of liquid hydrocarbon fuels from natural gas or coal-derived synthesis gas and oil and gas exploration, assessment, and recovery technology (high priority); production of liquid fuels from coal and oil shale by hydrogenation or pyrolysis, coal gasification, and achievement of cost reductions in coal and oil shale exploration and assessment techniques (medium priority); and in-situ coal gasification (low priority). Bilateral agreements for energy R and D with other countries are carried out under the Australian Department of National Development and Energy. Australia currently has agreements related to oil, gas, shale, and coal liquids R and D with the UK, the US, Japan, and West Germany.

  3. Laboratory Directed Research and Development FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    Struble, G.L.; Middleton, C.; Anderson, S.E.; Baldwin, G.; Cherniak, J.C.; Corey, C.W.; Kirvel, R.D.; McElroy, L.A. [eds.

    1992-12-31

    The Laboratory Directed Research and Development (LDRD) Program at Lawrence Livermore National Laboratory (LLNL) funds projects that nurture and enrich the core competencies of the Laboratory. The scientific and technical output from the FY 1992 RD Program has been significant. Highlights include (1) Creating the first laser guide star to be coupled with adaptive optics, thus permitting ground-based telescopes to obtain the same resolution as smaller space-based instruments but with more light-gathering power. (2) Significantly improving the limit on the mass of the electron antineutrino so that neutrinos now become a useful tool in diagnosing supernovas and we disproved the existence of a 17-keV neutrino. (3) Developing a new class of organic aerogels that have robust mechanical properties and that have significantly lower thermal conductivity than inorganic aerogels. (4) Developing a new heavy-ion accelerator concept, which may enable us to design heavy-ion experimental systems and use a heavy-ion driver for inertial fusion. (5) Designing and demonstrating a high-power, diode-pumped, solid-state laser concept that will allow us to pursue a variety of research projects, including laser material processing. (6) Demonstrating that high-performance semiconductor arrays can be fabricated more efficiently, which will make this technology available to a broad range of applications such as inertial confinement fusion for civilian power. (7) Developing a new type of fiber channel switch and new fiber channel standards for use in local- and wide-area networks, which will allow scientists and engineers to transfer data at gigabit rates. (8) Developing the nation`s only numerical model for high-technology air filtration systems. Filter designs that use this model will provide safer and cleaner environments in work areas where contamination with particulate hazardous materials is possible.

  4. When Research Meets Development: Antecedents and Implications of Transfer Speed

    OpenAIRE

    Du, Jingshu; Leten, Bart; Vanhaverbeke, Wim; Lopez-Vega, Henry

    2014-01-01

    This paper focuses on the organization of new product development in large, R&D-intensive firms. In these firms, research and development activities are often separated. Research is conducted in dedicated research projects at specialized research labs. Once research results are achieved by research projects, they are transferred to business units for further development and commercialization. We investigate the speed whereby research projects transfer their first research results to busin...

  5. PFM2: a 32 × 32 processor for X-ray diffraction imaging at FELs

    Science.gov (United States)

    Manghisoni, M.; Fabris, L.; Re, V.; Traversi, G.; Ratti, L.; Grassi, M.; Lodola, L.; Malcovati, P.; Vacchi, C.; Pancheri, L.; Benkechcache, M. E. A.; Dalla Betta, G.-F.; Xu, H.; Verzellesi, G.; Ronchin, S.; Boscardin, M.; Batignani, G.; Bettarini, S.; Casarosa, G.; Forti, F.; Giorgi, M.; Paladino, A.; Paoloni, E.; Rizzo, G.; Morsani, F.

    2016-11-01

    This work is concerned with the design of a readout chip for application to experiments at the next generation X-ray Free Electron Lasers (FEL). The ASIC, named PixFEL Matrix (PFM2), has been designed in a 65 nm CMOS technology and consists of 32 × 32 pixels. Each cell covers an area of 110 × 110 μm2 and includes a low-noise charge sensitive amplifier (CSA) with dynamic signal compression, a time-variant shaper used to process the preamplifier output signal, a 10-bit successive approximation register (SAR) analog-to-digital converter (ADC) and digital circuitry for channel control and data readout. Two different solutions for the readout channel, based on different versions of the time-variant filter, have been integrated in the chip. Both solutions can be operated in such a way to cope with the high frame rate (exceeding 1 MHz) foreseen for future X-ray FEL machines. The ASIC will be bump bonded to a slim/active edge pixel sensor to form the first demonstrator for the PixFEL X-ray imager. This work has been carried out in the frame of the PixFEL project funded by Istituto Nazionale di Fisica Nucleare (INFN), Italy.

  6. Feasibility Study of a Laser Beat-Wave Seeded THz FEL at the Neptune Laboratory

    CERN Document Server

    Reiche, Sven; Pellegrini, Claudio; Rosenzweig, James E; Shvets, Gennady; Tochitsky, Sergei Ya

    2005-01-01

    Free-Electron Laser in the THz range can be used to generate high output power radiation or to modulate the electron beam longitudinally on the radiation wavelength scale. Microbunching on the scale of 1-5 THz is of particular importance for potential phase-locking of a modulated electron beam to a laser-driven plasma accelerating structure. However the lack of a seeding source for the FEL at this spectral range limits operation to a SASE FEL only, which denies a subpicosecond synchronization of the current modulation or radiation with an external laser source. One possibility to overcome this problem is to seed the FEL with two external laser beams, which difference (beat-wave) frequency is matched to the resonant FEL frequency in the THz range. In this presentation we study feasibility of an experiment on laser beat-wave injection in the THz FEL considered at the UCLA Neptune Laboratory, where both a high brightness photoinjector and a two-wavelength, TW-class CO2 laser system exist. By incorporating the en...

  7. Is astronomical research appropriate for developing countries?

    Science.gov (United States)

    Snowden, Michael S.

    An unproductive 45-cm astronomical telescope, given by JICA (Japan) to Sri Lanka, raises general questions as to the reasons for unproductive pure science in developing countries. Before installation, site, maintenance, and scientific objectives were discussed. The facility was launched with a conference organised by the UN Office for Outer Space Affairs. Unfortunately, no research or significant education has resulted after four years. The annual operating cost is U.S. $5000 per year, including salary for a trainee, maintenance, and a modest promotional programme. Comparison with a similar installation in Auckland suggests lack of funding or technical competence do not explain the failure in Sri Lanka. The facility in New Zealand, on the roof of Auckland University's Physics Department, has a slightly smaller budget but has led to modest but useful research and teaching. Lack of financial backing and expertise are often blamed for weak science in developing countries, but examination shows most of these countries have adequately skilled people, and plenty of resources for religion and military. General lack of motivation for science appears to be the principal reason. This lack of interest and highly inefficient bureaucracies are common to scientifically unproductive countries. They mostly lack the cultural and philosophical base of the European Renaissance that motivate the pursuit of modern science, an activity that violates human preferences. There are excellent facilities (ESO, SAAO, Cerro Tololo, and GONG) in some of these same countries, when administered from the West.

  8. Waste and Disposal: Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Neerdael, B.; Marivoet, J.; Put, M.; Van Iseghem, P

    2001-04-01

    This contribution to the annual report describes the main activities of the Waste and Disposal Department of the Belgian Nuclear Research Center SCK-CEN. Achievements in 2000 in three topical areas are reported on: performance assessments, waste forms/packages and near- and far field studies. Performance assessment calculations were made for the geological disposal of high-level and long-lived waste in a clay formation. An impact assessment was completed for the radium storage facility at Olen (Belgium). Geological data, pumping rates and various hydraulic parameters were collected in support of the development of a new version of the regional hydrogeological model for the Mol site. Research and Development on waste forms and waste packages included both in situ and laboratory tests. Main emphasis in 2000 was on corrosion studies on vitrified high-level waste, the investigation of localised corrosion of candidate container and overpack materials and the study of the effect of the degradation of cellulose containing waste as well as of bituminized waste on the solubility and the sorption of Pu and Am in geological disposal conditions in clay. With regard to near- and far-field studies, percolation and diffusion experiments to determine migration parameters of key radionuclides were continued. The electromigration technique was used to study the migration of redox sensitive species like uranium. In addition to laboratory experiments, several large-scale migration experiments were performed in the HADES Underground Research Laboratory. In 2000, the TRANCOM Project to study the influence of dissolved organic matter on radionuclide migration as well as the RESEAL project to demonstrate shaft sealing were continued.

  9. 7 CFR 981.41 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 981.41 Section 981.41... Regulating Handling Research § 981.41 Research and development. (a) General. The Board, with the approval of... research, marketing research and development projects, and marketing promotion including paid advertising...

  10. Nurses' experiences of participation in a research and development programme

    DEFF Research Database (Denmark)

    Jensen, Kirsten Pryds; Bäck-Pettersson, Siv; Kýlén, Sven

    2013-01-01

    To describe clinical nurses' experience of participating in a Research and Development (R&D) programme and its influence on their research interest and ability to conduct and apply nursing research......To describe clinical nurses' experience of participating in a Research and Development (R&D) programme and its influence on their research interest and ability to conduct and apply nursing research...

  11. Operational Research(ers) in development: Growing a new generation of operational researchers

    OpenAIRE

    I Durbach; Scott, L; J Nyirenda; S Silal

    2013-01-01

    This paper explores the theme of training operational research (OR) practitioners in South Africa by critically evaluating a Masters program in Operational Research in Development (ORD), launched in 2005 at the University of Cape Town. This program was specifically focused on applying OR to the problems of the developing world in general and Africa in particular. We describe the program and review the practical work undertaken by students participating in the program. Topics range widely acro...

  12. Risk in vaccine research and development quantified.

    Directory of Open Access Journals (Sweden)

    Esther S Pronker

    Full Text Available To date, vaccination is the most cost-effective strategy to combat infectious diseases. Recently, a productivity gap affects the pharmaceutical industry. The productivity gap describes the situation whereby the invested resources within an industry do not match the expected product turn-over. While risk profiles (combining research and development timelines and transition rates have been published for new chemical entities (NCE, little is documented on vaccine development. The objective is to calculate risk profiles for vaccines targeting human infectious diseases. A database was actively compiled to include all vaccine projects in development from 1998 to 2009 in the pre-clinical development phase, clinical trials phase I, II and III up to Market Registration. The average vaccine, taken from the preclinical phase, requires a development timeline of 10.71 years and has a market entry probability of 6%. Stratification by disease area reveals pandemic influenza vaccine targets as lucrative. Furthermore, vaccines targeting acute infectious diseases and prophylactic vaccines have shown to have a lower risk profile when compared to vaccines targeting chronic infections and therapeutic applications. In conclusion; these statistics apply to vaccines targeting human infectious diseases. Vaccines targeting cancer, allergy and autoimmune diseases require further analysis. Additionally, this paper does not address orphan vaccines targeting unmet medical needs, whether projects are in-licensed or self-originated and firm size and experience. Therefore, it remains to be investigated how these - and other - variables influence the vaccine risk profile. Although we find huge differences between the risk profiles for vaccine and NCE; vaccines outperform NCE when it comes to development timelines.

  13. 78 FR 28292 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

    Science.gov (United States)

    2013-05-14

    ... AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development... Research and Development and Clinical Science Research and Development Services Scientific Merit Review... areas of biomedical, behavioral and clinical science research. The panel meetings will be open to the...

  14. Research skills development in higher education students

    Directory of Open Access Journals (Sweden)

    Tiziana Priede Bergamini

    2014-03-01

    Full Text Available This case study presents the development of a research project in a third-year undergraduate course, Family Business Administration. The research project aimed at promoting research skills in students. The authors formed working groups of no more than six students, and each group had to select an original research topic after conducting a literature review. Students were guided by the teachers and provided with initial reading materials, as well as an activity rubric specifying the minimum requirements of a scientific paper. The activity evaluation consisted of two parts, a written article (group assessment and an oral presentation (individual assessment. After the activity concluded, students were asked to answer an online satisfaction survey. Results showed students viewed the activity as positive and appreciated the chance to develop several competencies, including research skills. The authors conclude several objectives were achieved, including: familiarize students with scientific research; make sure students are cable of finding information through primary sources; have students apply the knowledge acquired during the course; promote responsibility in students; cultivate in students the capacity to summarize ideas and expose them in a reasoned way; have students learn from the experiences and knowledge of others; and develop in students the capacity to synthesize all that information. -------------------------- El desarrollo de la capacidad investigadora en estudiantes de educación superior Resumen  Este estudio de caso presenta el desarrollo de un proyecto de investigación en la asignatura “Administración de la Empresa Familiar” de tercer curso. El proyecto de investigación tenía como propósito fomentar de forma específica la capacidad investigadora de los alumnos. Se formaron grupos de trabajo de no más de seis estudiantes, y cada grupo tenía que seleccionar un tema de investigación original tras realizar una búsqueda de

  15. Aerodynamics support of research instrument development

    Science.gov (United States)

    Miller, L. Scott

    1990-01-01

    A new velocimetry system is currently being developed at NASA LaRC. The device, known as a Doppler global velocimeter (DGV), can record three velocity components within a plane simultaneously and in near real time. To make measurements the DGV, like many other velocimetry systems, relies on the scattering of light from numerous small particles in a flow field. The particles or seeds are illuminated by a sheet of laser light and viewed by two CCD cameras. The scattered light from the particles will have a frequency which is a function of the source laser light frequency, the viewing angle, and most importantly the seed velocities. By determining the scattered light intensity the velocity can be measured at all points within the light sheet simultaneously. Upon completion of DGV component construction and initial check out a series of tests in the Basic Aerodynamic Research (wind) Tunnel (BART) are scheduled to verify instrument operation and accuracy. If the results are satisfactory, application of the DGV to flight measurements on the F-18 High Alpha Research Vehicle (HARV) are planned. The DGV verification test in the BART facility will utilize a 75 degree swept delta wing model. A major task undertaken this summer included evaluation of previous results for this model. A specific series of tests matching exactly the previous tests and exploring new DGV capabilities were developed and suggested. Another task undertaken was to study DGV system installation possibilities in the F-18 HARV aircraft. In addition, a simple seeding system modification was developed and utilized to make Particle Imaging Velocimetry (PIV) measurements in the BART facility.

  16. 48 CFR 731.773 - Independent research and development costs.

    Science.gov (United States)

    2010-10-01

    ... Organizations 731.773 Independent research and development costs. Pending establishment of Government-wide... independent research and development costs. ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Independent research and...

  17. Research and Development in the Anthropogenic Cryosphere

    Science.gov (United States)

    de Jong, C.; Luthe, T.; Hohenwallne, D.

    2009-04-01

    Much of todays cryosphere research is oriented towards the polar regions and is strongly supported by large associations and funding. On the other hand, funding and institutional support is still limited for mountains. In Europe, mountain research is mainly funded through Alpine Space Interregs, FP7, ESF and COST. However, there is growing global change pressure on mountain regions, particularly in the more fragile, higher altitudes such as between 1000 - 3200 m in the Alps. Although these zones are comparable to the Arctic in terms of climatic and physiographic conditions, they are not in terms of human pressures and atmospheric pollution released from surrounding agglomerations. A re-orientation of research into more applied projects that tackle present day problems is necessary. Not only is climate change rapidly changing the face of mountains, socio-economic multipliers are also acting fast. New problems such as conflicts over natural resources are evolving at a rapid rate, requiring research funding and projects to respond at according rates if timely and efficient solutions are to be proposed. Other problems include contamination of high altitude lakes and ecosystems through atmospheric precipitation of persistent organic pollutants and concentration of radio-active substances. The rapid melt of glacier ice is also releasing pollutants that have been captured for many decades. Many of the present day problems develop due to a miscomprehension of the cryosphere. Short-term economical reasoning outweighs the long-term ecological impacts that could be very counter-productive at the long term. Both the glaciological, snow, permafrost, geomorphological, ecological, hydrological and atmospheric conditions are increasingly heavily modified by human impacts. The effects include the alteration of the ice cover (by artificial covering of glaciers), production of artificial snow cover, snow and ground compaction, erosion, landsliding, change in vegetation cover and

  18. Developing Action Research for Developing Teachers in Kosovo

    Directory of Open Access Journals (Sweden)

    Eda Vula

    2015-10-01

    Full Text Available This study explores the perception of student teachers on their role as researchers and the impact of action research in their professional development. The study involves the master level student teachers of the Faculty of Education at the University of Prishtina in Kosovo. Qualitative data collected through reflective writing, open-ended questionnaires and research reports developed by student teachers were analyzed through the inductive method. The study suggests that teacher research has a major impact not only on the improvement of teaching practices and increasing student achievement, but also on increasing the collaboration among peers and fostering a new culture where teachers assume their responsibilities to apply action research in their own classrooms as a tool for classroom transformation. Teacher education and school context are crucial in this matter and the need arises to avoid viewing the development of teacher research as an isolated activity.Keywords: Action research, professional development, student teacher, environmentÖzBu araştırma, öğrenci öğretmenlerin araştırmacı rollerini algılamalarını ve profesyonel gelişimlerinde eylem araştırmaların etkisini incelemektedir. Araştırma, Priştine Üniversitesi Eğitim Fakültesi’nde yüksek lisans düzeyinde olan öğrenci öğretmenleri kapsamaktadır. Öğrenciler tarafından yapılan yansıtıcı yazılar, açık uçlu soru formları ve araştırma raporlarından toplanan nitel veriler tümevarım yöntemi aracılığıyla incelenmiştir. Araştırma, öğretmen araştırmalarının, sadece öğretim uygulamalarının geliştirilmesine ve öğrenci başarısının yükseltilmesine değil, aynı zamanda yaşıtlar arası işbirliğini arttırma ve öğretmenlerin sınıfı dönüştürme aracı olarak kendi sınıflarında eylem araştırmasını uygulama sorumluluğunu yeni bir kültür olarak teşvik etmeye önemli bir etkisinin olduğunu ortaya koymaktad

  19. 48 CFR 31.205-48 - Research and development costs.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Research and development... Organizations 31.205-48 Research and development costs. Research and development, as used in this subsection... grant for research and development effort, the excess is unallowable under any other Government contract. ...

  20. 7 CFR 959.48 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 959.48 Section 959.48... Regulating Handling Research and Development § 959.48 Research and development. The committee, with the... research, and development projects designed to assist, improve, or promote the marketing,...

  1. 7 CFR 947.47 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 947.47 Section 947.47... Research and Development § 947.47 Research and development. The committee, with the approval of the Secretary, may provide for the establishment of marketing research and development projects designed...

  2. Research Development of MOX Fuel Element Technology

    Institute of Scientific and Technical Information of China (English)

    YANG; Qi-fa; YANG; Ting-gui; SHANG; Gai-bin; YIN; Bang-yue; ZHOU; Guo-liang; LI; Qiang; JIANG; Bao-jun

    2015-01-01

    The project of"MOX Fuel Element Research"led by China Institute of Atomic Energy,404Company Ltd.and CNPE Zhengzhou Branch are members of the project research team.The research task of 2015had been accomplished successfully,and the research productions of this year build up a basis for the future research,also

  3. Recent developments of atmospheric research in Ukraine

    Science.gov (United States)

    Milinevsky, G. P.; Danylevsky, V. O.; Grytsai, A. V.; Evtushevsky, O. M.; Kravchenko, V. O., Bovchaliuk, A. P.; Bovchaliuk, V. P.; Sosonkin, M. G.; Goloub, Ph.; Savitska, L. Y.; Udodov, E. V.; Voytenko, V. P.

    2012-11-01

    In recent years the Joint Laboratory of Atmospheric Optics and Aerosols of Ukraine has been carrying out atmospheric research in cooperation with international program of climate change studies. Our current research is aimed at studying aerosol and ozone in the Earth's atmosphere, because these constituents have a substantial influence on climate. In Ukraine, atmospheric aerosol remote sensing in the PHOTONS/AERONET network has been carried out since 2006 in Sevastopol and 2008 in Kyiv. For this research, sunphotometers CIMEL CE318 have been used. A mobile AERONET station has been developed, which consists of CE318N and portable Microtops II sunphotometers, as well as two self-designed experimental portable sunphotometer models and an ozonometer for aerosol and ozone study. The team's findings on aerosol spectral optical thickness, as well as optical and physical properties of aerosol particles (single-scattering albedo, distribution of particles by sizes, Ångström exponent), are discussed in the paper. In 2010, upon the establishment of the new regional atmospheric research station Nr.498 Kyiv-Goloseyev, the team commenced with measurements of the total column density and vertical distribution of ozone, using the Dobson D040 spectrophotometer, in the framework of the Global Atmosphere Watch Program of WMO. The station has also been equipped with a Vaisala automatic weather station, a surface ozone 49i analyzer, and an experimental complex for monitoring secondary space rays. The aerosol and ozone measurements have been continuously submitted to data centres of AERONET (http://aeronet.gsfc.nasa.gov/) and WMO (www.woudc.org/data/). For aerosol and ozone research, the data from satellite sources (POLDER, MODIS, OMI, and SCIAMACHY) have also been analysed. The work on a proposal to design, build, and launch the space radiometer/polarimeter for global monitoring of atmospheric aerosols has commenced recently. This instrument should have the capability of

  4. The DarkLight Experiment at the JLab FEL

    Science.gov (United States)

    Fisher, Peter

    2013-10-01

    DarkLight will study the production of gauge bosons associated with Dark Forces theories in the scattering of 100 MeV electrons on proton a target. DarkLight is a spectrometer to measure all the final state particles in e- + p -->e- + p +e- +e+ . QED allows this process and the invariant mass distribution of the e+e- pair is a continuum from nearly zero to nearly the electron beam energy. Dark Forces theories, which allow the dark matter mass scale to be over 1 TeV, predict a gauge boson A' in the mass range of 10-1,000 MeV and decays to an electron-positron pair with an invariant mass of mA'. We aim to search for this process using the 100 MeV, 10 mA electron beam at the JLab Free Electron Laser impinging on a hydrogen target with a 1019 cm-2 density. The resulting luminosity of 6 ×1035/cm2-s gives the experiment enough sensitivity to probe A' couplings of 10-9 α . DarkLight is unique in its design to detect all four particles in the final state. The leptons will be measured in a large high-rate TPC and a silicon sensor will measure the protons. A 0.5 T solenoidal magnetic field provides the momentum resolution and focuses the copious Møller scattering background down the beam line, away from the detectors. A first beam test has shown the FEL beam is compatible with the target design and that the hall backgrounds are manageable. The experiment has been approved by Jefferson Lab for first running in 2017.

  5. Fast Charging Electric Vehicle Research & Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Heny, Michael

    2014-03-31

    The research and development project supported the engineering, design and implementation of on-road Electric Vehicle (“EV”) charging technologies. It included development of potential solutions for DC fast chargers (“DCFC”) capable of converting high voltage AC power to the DC power required by EVs. Additional development evaluated solutions related to the packaging of power electronic components and enclosure design, as well as for the design and evaluation of EV charging stations. Research compared different charging technologies to identify optimum applications in a municipal fleet. This project collected EV usage data and generated a report demonstrating that EVs, when supported by adequate charging infrastructure, are capable of replacing traditional internal combustion vehicles in many municipal applications. The project’s period of performance has demonstrated various methods of incorporating EVs into a municipal environment, and has identified three general categories for EV applications: - Short Commute: Defined as EVs performing in limited duration, routine commutes. - Long Commute: Defined as tasks that require EVs to operate in longer daily mileage patterns. - Critical Needs: Defined as the need for EVs to be ready at every moment for indefinite periods. Together, the City of Charlottesville, VA (the “City”) and Aker Wade Power Technologies, LLC (“Aker Wade”) concluded that the EV has a viable position in many municipal fleets but with limited recommendation for use in Critical Needs applications such as Police fleets. The report also documented that, compared to internal combustion vehicles, BEVs have lower vehicle-related greenhouse gas (“GHG”) emissions and contribute to a reduction of air pollution in urban areas. The enhanced integration of EVs in a municipal fleet can result in reduced demand for imported oil and reduced municipal operating costs. The conclusions indicated in the project’s Engineering Report (see

  6. Fast Charging Electric Vehicle Research & Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Heny, Michael

    2014-03-31

    The research and development project supported the engineering, design and implementation of on-road Electric Vehicle (“EV”) charging technologies. It included development of potential solutions for DC fast chargers (“DCFC”) capable of converting high voltage AC power to the DC power required by EVs. Additional development evaluated solutions related to the packaging of power electronic components and enclosure design, as well as for the design and evaluation of EV charging stations. Research compared different charging technologies to identify optimum applications in a municipal fleet. This project collected EV usage data and generated a report demonstrating that EVs, when supported by adequate charging infrastructure, are capable of replacing traditional internal combustion vehicles in many municipal applications. The project’s period of performance has demonstrated various methods of incorporating EVs into a municipal environment, and has identified three general categories for EV applications: Short Commute: Defined as EVs performing in limited duration, routine commutes. - Long Commute: Defined as tasks that require EVs to operate in longer daily mileage patterns. - Critical Needs: Defined as the need for EVs to be ready at every moment for indefinite periods. Together, the City of Charlottesville, VA (the “City”) and Aker Wade Power Technologies, LLC (“Aker Wade”) concluded that the EV has a viable position in many municipal fleets but with limited recommendation for use in Critical Needs applications such as Police fleets. The report also documented that, compared to internal combustion vehicles, BEVs have lower vehicle-related greenhouse gas (“GHG”) emissions and contribute to a reduction of air pollution in urban areas. The enhanced integration of EVs in a municipal fleet can result in reduced demand for imported oil and reduced municipal operating costs. The conclusions indicated in the project’s Engineering Report (see Attachment

  7. CURRENT ANSTO RESEARCH ON WASTEFORM DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Vance, E.R.; Perera, D.S.; Stewart, M.W.A.; Begg, B.D.; Carter, M.L.; Day, R.A.; Moricca, S.; Smith, K.L.; Lumpkin, G.R.; Hanna, J.V.

    2003-02-27

    Current ANSTO scientific research on wasteform development for mainly high-level radioactive waste is directed towards practical applications. Titanate wasteform products we have developed or are developing are aimed at immobilization of: (a) tank wastes and sludges; (b) U-rich wastes from radioisotope production from reactor irradiation of UO2 targets; (c) Al-rich wastes arising from reprocessing of Al-clad fuels; (d) 99Tc; (e) high- Mo wastes arising from reprocessing of U-Mo fuels and (f) partitioned Cs-rich wastes. Other wasteforms include encapsulated zeolites or silica/alumina beads for immobilization of 129I. Wasteform production techniques cover hot isostatic and uniaxial pressing, sintering, and cold-crucible melting. In addition, building on previous work on speciation and leach resistance of Cs in cementitious products, we are studying geopolymers. Although we have a strong focus on candidate wasteforms for actual wastes, we have a considerable program directed at basic understanding of the wasteforms in regard to crystal chemistry, their dissolution behavior in aqueous media, radiation damage effects and processing techniques.

  8. Emittance studies at the Los Alamos National Laboratory Free-Electron Laser (FEL)

    Science.gov (United States)

    Carlsten, B. E.; Feldman, D. W.; Lumpkin, A. H.; Stein, W. E.; Warren, R. W.

    Recent emittance studies at the Los Alamos Free-Electron Laser (FEL) have indicated several areas of concern in the linac and beamline feeding the wiggler. Four emittance growth mechanisms of special importance have been studied. First, a rapid growth of the electron beam's emittance immediately after the spherical gridded Pierce gun resulted, in part, from the long time required for our pulsing electronics to ramp the grid voltage up at the start and down at the end of the pulse, which created a pulse with a cosine-like current distribution as a function of time. The growth was compounded by the extremely small radial beam size (almost a waist) leaving the gun. In addition, we saw evidence of electrostatic charging of the insulators in the gun, reducing the quality of the electron beam further. Second, the action of the solenoidal focusing fields in the low-voltage bunching region was studied, and criteria for a minimum emittance growth were established. Third, maximum misalignment angles and displacements for various elements of the beamline were calculated for the desired low emittance growth. Finally, emittance growth in the horizontal dimension through the nonisochronous bend caused by varying energy depression on the particles due to longitudinal wake fields was both calculated and observed. In addition, we measured energy depressions caused by the wake fields generated by various other elements in the beamline. Strategies were developed to relieve the magnitude of these wake-field effects.

  9. A study on the source and the style of Alkaafi fel Arooz-e-val Ghavaafi written by Khatib Tabrizi

    Directory of Open Access Journals (Sweden)

    صاحبعلي اكبري

    2008-07-01

    Full Text Available Alkaafi fel Arooz-e-val Ghavaafi written by Khatib Tabrizi is quite familiar for the students and researchers of the area of prosody and meter. Khatib Tabrizi is a sixth century scholar. The main characteristic of his Age in writing books was to adapt from the texts and works of the predecessors and little use of creativity and innovation. Considering the bibliography and the methodology of this great scholar in compiling the above mentioned text, the author of the article has concluded that Khatib Tabrizi like his other contemporary scholars could not avoid this characteristic of his Age and has emphasized on adaptation in his work very much. In his adaptations the main focus of Tabrizi has been on the books of Saaheb Ibn-e-Abbad and Akhfash. However he has also adapted from the books and works of the other scholars too. Keywords: Prosody, adaptation, Tabrizi, Arooz, Ghavafi.

  10. Numerical Modeling on Thermal Loading of Diamond Crystal in X-ray FEL Oscillator

    CERN Document Server

    Song, Meiqi; Guo, Yuhang; Li, Kai; Deng, Haixiao

    2015-01-01

    Due to high reflectivity and high resolution to X-ray pulse, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono-chromator in the next generation free electrons lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expanding of diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillator has been systematically studied by the combined simulation of Geant4 and ANSYS, and its dependence on the environment temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented.

  11. An FEL based high-intensity gamma source at the TESLA Test Facility at DESY

    CERN Document Server

    Pagani, C; Schneidmiller, E A; Yurkov, M V

    1999-01-01

    One possible extension of the FEL activity at DESY is connected with the installation of an additional FEL beamline providing tunable UV radiation with peak and average power of 220 GW and 7 kW, respectively. This report presents the feasibility study of a high-intensity, polarized, monochromatic gamma source at the TESLA Test Facility. Gamma quanta are produced in the process of Compton backscattering of the UV FEL radiation on 1 GeV electrons of the TTF accelerator. The ultimate intensity of the gamma source can reach a value up to 10 sup 1 sup 2 gamma quanta per second with a maximum energy of about 100 MeV. The energy resolution of the gamma source can be reduced down to a value of about 0.2%. Potential applications of the intense gamma source at the TESLA Test Facility are discussed as well.

  12. Diagnostic Tools for Operation and Optimization of the ELBE-FEL

    CERN Document Server

    Michel, P; Lehnert, U; Schneider, C; Schurig, R; Seidel, W; Teichert, J; Wohlfarth, D

    2005-01-01

    A FEL in the mid infrared range is one of the applications of the ELBE cw-electron accelerator. The successful operation of the lasing process for the different wavelength is mainly determined by the alignment of the optical cavities, the bunch length and the energy spread of the electron beam so as the transversal adjustment of the beam through the FEL. The energy spread and the bunch length of the electron beam have their minima at different phase conditions of the accelerator. For various energy settings of the accelerator a special adjustment of both parameters has to be found for the lasing process. The presentation describes the diagnostic tools used at ELBE for the correct alignment of the optical cavity, the steering of the electron beam through the FEL and the adjustment of the electron beam parameters with respect to energy spread and bunch length.

  13. Active FEL-Klystrons As Formers of Femto-Second Clusters of Electromagnetic Field. General Description

    Directory of Open Access Journals (Sweden)

    A.Ju. Brusnik

    2010-01-01

    Full Text Available A qualitative physical and technological substantiation of the creation possibility of a new class of Femto-second Free Electron Lasers (FFELs (active cluster FEL-klystrons is given in the article. The concept of “electromagnetic field” cluster is introduced. Apart from that, the main difference between the concepts “the electromagnetic cluster” and “the radio-pulse” (which is well-known in radio-physics is formulated. The concept of “cluster electromagnetic wave” is also discussed. A general approach to designing the proposed active cluster FEL-klystrons is formulated. The description of a principal design scheme of the active cluster FEL-klystrons and their key technological basis are discussed.

  14. The magnetic and diagnostics systems for the Advanced Photon Source self-amplified spontaneously emitting FEL

    CERN Document Server

    Gluskin, E; Dejus, Roger J; Hartog, P K D; Deriy, B N; Makarov, O A; Milton, S V; Moog, E R; Ogurtsov, V I; Trakhtenberg, E; Robinson, K E; Vasserman, I B; Vinokurov, N A; Xu, S

    1999-01-01

    A self-amplified spontaneously emitting (SASE) free-electron laser (FEL) for the visible-to-ultraviolet spectral range is under construction at the Advanced Photon Source at Argonne National Laboratory. The amplifier part of the FEL consists of twelve identical 2.7-m-long sections. Each section includes a 2.4-m-long, 33-mm-period hybrid undulator, a quadrupole lens, and a set of electron beam and radiation diagnostics equipment. The undulators will operate at a fixed magnetic gap (approx. 9.3 mm) with K=3.1. The electron beam position will be monitored using capacitive beam position monitors, YAG scintillators with imaging optics, and secondary emission detectors. The spatial distribution of the photon beam will be monitored by position sensitive detectors equipped with narrow-band filters. A high-resolution spectrograph will be used to observe the spectral distribution of the FEL radiation.

  15. Comparative Design Studies for the BESSY FEL Program using the MEDUSA and GENESIS Simulation Codes

    CERN Document Server

    Freund, H

    2005-01-01

    The BESSY FEL is based on a seeded cascade of High Gain Harmonic Generation (HGHG) sections followed by an amplifier to produce coherent and stable short wavelength output. Here, we report on comparative design studies carried out using the MEDUSA [1], and GENESIS [2] simulation codes. These two codes have each been used to successfully predict a variety of FEL designs and have agreed well with a number of important experiments. In addition, they were included in a comparative study of FEL simulation [3] that reported substantial agreement between the codes for the specific configurations studied. However, these codes are based on different assumptions. GENESIS treats the particle dynamics using a wiggler-averaged orbit approximation, the transverse electromagnetic field is treated using a field solver, and harmonics are not included. MEDUSA does not use the wiggler-averaged orbit approximation to treat particle dynamics, the transverse fields are treated using a Gaussian modal superposition, and harmonics ar...

  16. Recent Results from and Future Plans for the VISA II SASE FEL

    CERN Document Server

    Andonian, Gerard; Babzien, Marcus; Ben-Zvi, Ilan; Boscolo, Ilario; Cialdi, Simone; Ferrario, Massimo; Flacco, Alessandro Federico; Frigola, Pedro; Huang, Jung Y; Litvinenko, Vladimir N; Murokh, Alex; Palumbo, Luigi; Pellegrini, Claudio; Reiche, Sven; Rosenzweig, James E; Travish, Gil; Vicario, Carlo; Yakimenko, Vitaly

    2005-01-01

    As the promise of X-ray Free Electron Lasers (FEL) comes close to realization, the creation and diagnosis of ultra-short pulses is of great relevance in the SASE FEL (Self-Amplified Spontaneous Emission) community. The VISA II (Visible to Infrared SASE Amplifier) experiment entails the use of a chirped electron beam to drive a high gain SASE FEL at the Accelerator Test Facility (ATF) in Brookhaven National Labs (BNL). The resulting ultra-short pulses will be diagnosed using an advanced FROG (Frequency Resolved Optical Gating) technique, as well as a double differential spectrum (angle/wavelength) diagnostic. Implementation of sextupole corrections to the longitudinal aberrations affecting the high energy-spread chirped beam during transport to the VISA undulator is studied. Start-to-end simulations, including radiation diagnostics, are discussed. Initial experimental results involving a highly chirped beam transported without sextupole correction, the resulting high gain lasing, and computational analysis are...

  17. Design and Test of Wire-Scanners for SwissFEL

    CERN Document Server

    Orlandi, G L; Brands, H; Heimgartner, P; Ischebeck, R; Kammerer, A; Löhl, F; Lüscher, R; Mohanmurthy, P; Ozkan, C; Schlott, V; Schulz, L; Rippstein, B; Seiler, C; Trovati, S; Valitutti, P; Zimoch, D

    2016-01-01

    The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.8 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be discussed.

  18. IR-FEL-induced green fluorescence protein (GFP) gene transfer into plant cell

    CERN Document Server

    Awazu, K; Tamiya, E

    2002-01-01

    A Free Electron Laser (FEL) holds potential for various biotechnological applications due to its characteristics such as flexible wavelength tunability, short pulse and high peak power. We could successfully introduce the Green Fluorescent Protein (GFP) gene into tobacco BY2 cells by IR-FEL laser irradiation. The irradiated area of the solution containing BY2 cells and plasmid was about 0.1 mm sup 2. FEL irradiation at a wavelength of 5.75 and 6.1 mu m, targeting absorption by the ester bond of the lipid and the amide I bond of the protein, respectively, was shown to cause the introduction of the fluorescent dye into the cell. On the other hand, transient expression of the GFP fluorescence was only observed after irradiation at 5.75 mu m. The maximum transfer efficiency was about 0.5%.

  19. Research and development program, fiscal year 1970

    Energy Technology Data Exchange (ETDEWEB)

    1968-04-01

    The biomedical program of the Laboratory of Nuclear Medicine and Radiation Biology for FY 1970 is conducted within the scope of the following categories: Somatic Effects of Radiation; Combating Detrimental Effects of Radiation; Molecular and Cellular Level Studies; Environmental Radiation Studies; Radiological and Health Physics and Instrumentation; Cancer Research; and Selected Beneficial Applications. The overall objectives of the Laboratory within these areas of the Biology and Medicine Program may be summarized as follows: (1) investigation of the effects of ionizing radiation on systems of biological significance and on living organisms; (2) assessment and study of the immediate and long term consequences of the environmental radioactivity on flora, fauna, and man; (3) development of beneficial uses of ionizing radiation and radioactive substances in medicine and biology; and (4) the conduct of training and educational activities in fields related to the biological and medical aspects of radiation.

  20. Recent developments in blood cell labeling research

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, S.C.; Straub, R.F.; Meinken, G.E.

    1988-09-07

    A number of recent developments in research on blood cell labeling techniques are presented. The discussion relates to three specific areas: (1) a new in vitro method for red blood cell labeling with /sup 99m/Tc; (2) a method for labeling leukocytes and platelets with /sup 99m/Tc; and (3) the use of monoclonal antibody technique for platelet labeling. The advantages and the pitfalls of these techniques are examined in the light of available mechanistic information. Problems that remain to be resolved are reviewed. An assessment is made of the progress as well as prospects in blood cell labeling methodology including that using the monoclonal antibody approach. 37 refs., 4 figs.

  1. [Development of metallomics research on environmental toxicology].

    Science.gov (United States)

    Ogra, Yasumitsu

    2015-01-01

    Metallomics is newly coined terms and defined as a comprehensive analysis of the entirety of metal and metalloid species within a cell or tissue type. Then, metallome is defined as the entire category of metalloproteins and any other metal-containing biomolecules. Metallomics and research on metallome require analytical techniques that can provide information on the identification and quantification of metal/metalloid-containing biomolecules. This concept has been called speciation, and the acquisition of data according to the concept is performed using hyphenated techniques involving both separation and detection methods. In this review, the author intends to present several applications of complementary use of HPLC-inductively coupled plasma mass spectrometry (ICP-MS) and HPLC-electrospray ionization tandem mass spectrometry for identification of unknown selenium-containing metabolites, and also to present a newly developed technique, capillary LC-ICP-MS to be used for the analysis of metal-binding proteins.

  2. Protein Crystallography in Vaccine Research and Development.

    Science.gov (United States)

    Malito, Enrico; Carfi, Andrea; Bottomley, Matthew J

    2015-06-09

    The use of protein X-ray crystallography for structure-based design of small-molecule drugs is well-documented and includes several notable success stories. However, it is less well-known that structural biology has emerged as a major tool for the design of novel vaccine antigens. Here, we review the important contributions that protein crystallography has made so far to vaccine research and development. We discuss several examples of the crystallographic characterization of vaccine antigen structures, alone or in complexes with ligands or receptors. We cover the critical role of high-resolution epitope mapping by reviewing structures of complexes between antigens and their cognate neutralizing, or protective, antibody fragments. Most importantly, we provide recent examples where structural insights obtained via protein crystallography have been used to design novel optimized vaccine antigens. This review aims to illustrate the value of protein crystallography in the emerging discipline of structural vaccinology and its impact on the rational design of vaccines.

  3. Research and development of Cordyceps in Taiwan

    Directory of Open Access Journals (Sweden)

    Ching-Peng Chiu

    2016-12-01

    Full Text Available Cordyceps is treasured entomopathogenic fungi that have been used as antitumor, immunomodulating, antioxidant, and pro-sexual agent. Cordyceps, also called DongChongXiaCao in Chinese, Yartsa Gunbu (Tibetan, means winter worm-summer grass. Natural Cordyceps sinensis with parasitic hosts is difficult to be collected and the recent findings on its potential pharmacological functions, resulted in skyrocketing prices. Therefore, finding a mass-production method or an alternative for C. sinensis products is a top-priority task. In this review, we describe current status of Cordyceps research and its recent developments in Taiwan. The content and pharmacological activities of four major industrial species of Cordyceps (C. sinensis, Cordyceps militaris, Cordyceps cicadae and Cordyceps sobolifera used in Taiwan, were reviewed. Moreover, we highlighted the effect of using different methods of fermentation and production on the morphology and chemical content of Cordyceps sp. Finally, we summarized the bottle-necks and challenges facing Cordyceps research as well as we proposed future road map for Cordyceps industry in Taiwan.

  4. Biomedical engineering for health research and development.

    Science.gov (United States)

    Zhang, X-Y

    2015-01-01

    Biomedical engineering is a new area of research in medicine and biology, providing new concepts and designs for the diagnosis, treatment and prevention of various diseases. There are several types of biomedical engineering, such as tissue, genetic, neural and stem cells, as well as chemical and clinical engineering for health care. Many electronic and magnetic methods and equipments are used for the biomedical engineering such as Computed Tomography (CT) scans, Magnetic Resonance Imaging (MRI) scans, Electroencephalography (EEG), Ultrasound and regenerative medicine and stem cell cultures, preparations of artificial cells and organs, such as pancreas, urinary bladders, liver cells, and fibroblasts cells of foreskin and others. The principle of tissue engineering is described with various types of cells used for tissue engineering purposes. The use of several medical devices and bionics are mentioned with scaffold, cells and tissue cultures and various materials are used for biomedical engineering. The use of biomedical engineering methods is very important for the human health, and research and development of diseases. The bioreactors and preparations of artificial cells or tissues and organs are described here.

  5. Robert R. Wilson Prize for Achievement in the Physics of Particle Accelerators Lecture: Frontiers of FEL Physics and Technology

    Science.gov (United States)

    Madey, John M. J.

    2012-03-01

    For much of the past 40 years, efforts to advance the capabilities of FELs have focussed on the frontiers of operation at high average power and short wavelengths with impressive and gratifying results. But a number of potentially important additional frontiers remain to be explored. I will briefly describe several of the new areas in which we have worked relating to the exploitation of boundary conditions to enhance oscillator phase coherence and stability, the exploitation of phase coherence to reduce the quantum fluctuations in amplitude of the coherent harmonics, the elucidation of the classical Wheeler-Feynman coherent radiation reaction force in single pass radiation sources, the development of the precision, robust high peak and average power optical elements needed for the reliable operation of these sources and the application of these advances to the development of optimized inverse-Compton x-ray and gamma ray sources.

  6. Obtaining high degree of circular polarization at X-ray FELs via a reverse undulator taper

    Energy Technology Data Exchange (ETDEWEB)

    Schneidmiller, E.A.; Yurkov, M.V.

    2013-08-15

    Baseline design of a typical X-ray FEL undulator assumes a planar configuration which results in a linear polarization of the FEL radiation. However, many experiments at X-ray FEL user facilities would profit from using a circularly polarized radiation. As a cheap upgrade one can consider an installation of a short helical (or cross-planar) afterburner, but then one should have an efficient method to suppress powerful linearly polarized background from the main undulator. In this paper we propose a new method for such a suppression: an application of the reverse taper in the main undulator. We discover that in a certain range of the taper strength, the density modulation (bunching) at saturation is practically the same as in the case of non-tapered undulator while the power of linearly polarized radiation is suppressed by orders of magnitude. Then strongly modulated electron beam radiates at full power in the afterburner. Considering SASE3 undulator of the European XFEL as a practical example, we demonstrate that soft X-ray radiation pulses with peak power in excess of 100 GW and an ultimately high degree of circular polarization can be produced. The proposed method is rather universal, i.e. it can be used at SASE FELs and seeded (self-seeded) FELs, with any wavelength of interest, in a wide range of electron beam parameters, and with any repetition rate. It can be used at different X-ray FEL facilities, in particular at LCLS after installation of the helical afterburner in the near future.

  7. Cat (Fel d 1) and dog (Can f 1) allergen levels in cars, dwellings and schools.

    Science.gov (United States)

    Niesler, A; Ścigała, G; Łudzeń-Izbińska, B

    Pets are an important source of indoor allergens. The aim of the study was to compare cat and dog allergen levels in cars, schools and homes. The study was carried out in 17 cars, 14 classrooms and 19 dwellings located in the highly industrialized and urbanized region of Poland. Dust and air samples were analyzed for Fel d 1 and Can f 1 using a double monoclonal ELISA assay. The highest amounts of cat and dog allergens (Fel d 1: 1169 μg/g; Can f 1: 277 μg/g) were found in dwellings with pets. Allergen concentrations were correlated with the number of animals kept at home. Although concentrations on automobile seats were lower, Fel d 1 levels exceeded 8 μg/g in 23.5 % of cars and high levels of Can f 1 (>10 μg/g) were found in 17.6 % of cars. The study revealed that cars of pet owners may be reservoirs of cat and dog allergens even when animals are not transported in them. In schools, concentrations of pet allergens did not reach high levels, but the moderate levels of Fel d 1 (≥1-8 μg/g) and Can f 1 (≥2-10 μg/g) were detected in 42.9 and 7.1 % of the investigated classrooms. Concentrations of cat and dog allergen in schools were higher than in homes without pets. While airborne Fel d 1 and Can f 1 levels were found low, residential allergen concentrations in settled dust and air were correlated. The study results suggest that classrooms and cars of pet owners may be important sites of exposure to cat and dog allergens, though the highest concentrations of Fel d 1 and Can f 1 are found in homes of pet owners.

  8. Challenges of Research and Human Capital Development in Nigeria

    Science.gov (United States)

    Chikwe, Christian K.; Ogidi, Reuben C.; Nwachukwu, K.

    2015-01-01

    The paper discussed the challenges of research and human capital development in Nigeria. Research and human capital development are critical to the development of any nation. Research facilitates human capital development. A high rating in human capital development indices places a country among the leading countries of the world. The paper…

  9. Laboratory Directed Research and Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Ogeka, G.J.; Romano, A.J.

    1992-12-01

    This report briefly discusses the following research: Advances in Geoexploration; Transvenous Coronary Angiography with Synchrotron X-Rays; Borehole Measurements of Global Warming; Molecular Ecology: Development of Field Methods for Microbial Growth Rate and Activity Measurements; A New Malaria Enzyme - A Potential Source for a New Diagnostic Test for Malaria and a Target for a New Antimalarial Drug; Basic Studies on Thoron and Thoron Precursors; Cloning of the cDNA for a Human Serine/Threonine Protein Kinase that is Activated Specifically by Double-Stranded DNA; Development of an Ultra-Fast Laser System for Accelerator Applications; Cluster Impact Fusion; Effect of a Bacterial Spore Protein on Mutagenesis; Structure and Function of Adenovirus Penton Base Protein; High Resolution Fast X-Ray Detector; Coherent Synchrotron Radiation Longitudinal Bunch Shape Monitor; High Grain Harmonic Generation Experiment; BNL Maglev Studies; Structural Investigations of Pt-Based Catalysts; Studies on the Cellular Toxicity of Cocaine and Cocaethylene; Human Melanocyte Transformation; Exploratory Applications of X-Ray Microscopy; Determination of the Higher Ordered Structure of Eukaryotic Chromosomes; Uranium Neutron Capture Therapy; Tunneling Microscopy Studies of Nanoscale Structures; Nuclear Techiques for Study of Biological Channels; RF Sources for Accelerator Physics; Induction and Repair of Double-Strand Breaks in the DNA of Human Lymphocytes; and An EBIS Source of High Charge State Ions up to Uranium.

  10. Organising Quality Function in Research and Development

    Directory of Open Access Journals (Sweden)

    Rajendra Prasad

    2006-01-01

    Full Text Available Quality function may be summarised as quality generation, quality control, and qualityassurance. The quality generation and quality control, because of their fuactional nature, arecomparatively easy to organise, however, the challenge is to organise quality assurance in theorganisation. It is the challenge because quality assurance should seamlessly merge with theR&D process. In future, the organisations, whether real or virtual, are going to bepredominantly, research and development (R&D oriented rather than pure manufacturing orservice providers. However, the nature and intensity of the R&D may differ. It could be fromsimple improvement to innovation, to exploitation of inventions.Organising quality function in R&D means organising its various dimensions against thestipulated criteria such as the realisation of the quality system; realisation of quality duringproduct development, including system engineering; staffing of quality generation, quality control,and quality assurance; balancing of the quality function; harnessing of project quality, functionalquality, staff quality and line quality; application of the RHR principle; exploitation of the toolsof organising, democratic organisation; and so on. The basic purpose of organising the qualityfunction is to inculcate the sense of pride in quality among the scientists so that they feelpassionate about it. It is the passion and love for quality that generates, sustains, and maintainsquality.

  11. Analysis of longitudinal bunching in an FEL driven two-beam accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Lidia, S.; Gardelle, J.; Lefevre, T.; Donohue, J.T.; Gouard, P.; Rullier, J.L.; Vermare, C.

    2000-08-01

    Recent experiments have explored the use of a free-electron laser (FEL) as a buncher for a microwave two-beam accelerator, and the subsequent driving of a standing-wave rf output cavity. Here the authors present a deeper analysis of the longitudinal dynamics of the electron bunches as they are transported from the end of the FEL and through the output cavity. In particular, the authors examine the effect of the transport region and cavity aperture to filter the bunched portion of the beam.

  12. A project of accelerator-recuperator for Novosibirsk high-power FEL

    Science.gov (United States)

    Bolotin, V. P.; Vinokurov, N. A.; Kayran, D. A.; Knyazev, B. A.; Kolobanov, E. I.; Kotenkov, V. V.; Kubarev, V. V.; Kulipanov, G. N.; Matveenko, A. N.; Medvedev, L. E.; Miginsky, S. V.; Mironenko, L. A.; Oreshkov, A. D.; Ovchar, V. K.; Popik, V. M.; Salikova, T. V.; Serednyakov, S. S.; Skrinsky, A. N.; Tcheskidov, V. G.; Shevchenko, O. A.; Scheglov, M. A.

    2006-12-01

    The first stage of the Novosibirsk high-power free-electron laser (FEL) was commissioned in 2003. It is driven by a CW energy recovery linac. The next step will be the full-scale machine, a four-track accelerator-recuperator based on the same RF accelerating structure. This upgrade will permit to get shorter wavelengths in the infrared region and increase the average power of the FEL by several times. The scheme and some technical details of the project are set out. The installation will be a prototype for future multiturn accelerator-recuperators.

  13. Optimization and Modeling of the Accelerator for the FERMI @ Elettra FEL

    CERN Document Server

    Di Mitri, S; Emma, P; Huang, Z; Wang, D; Wu, J; Zholents, A; Craievich, P

    2005-01-01

    Design studies are in progress to use the existing FERMI@Elettra linear accelerator for a seeded harmonic cascade FEL facility [1]. This accelerator will be upgraded to 1.2 GeV and equipped with a low-emittance RF photocathode gun, laser heater, two bunch compressors, and beam delivery system. We present an optimization study for all the components following the gun, with the aim of achieving high peak current, low energy spread and low emittance electron beam necessary for the FEL. Various operational scenarios are discussed. Results of accelerator simulations including effects of space charge, coherent synchrotron radiation, and wakefields are reported.

  14. Beam Line Commissioning of a UV/VUV FEL at Jefferson Lab

    Energy Technology Data Exchange (ETDEWEB)

    Benson, Stephen; Blackburn, Keith; Bullard, Daniel; Clavero Perez, Cesar; Coleman, James; Dickover, Cody; Douglas, David; Ellingsworth, Forrest; Evtushenko, Pavel; Hernandez-Garcia, Carlos; Gould, Christopher; Gubeli, Joseph; Hardy, David; Jordan, Kevin; Klopf, John; James, Kortze; Legg, Robert; Marchlik, Matthew; Moore, Steven; Neil, George; Powers, Thomas; Sexton, Daniel; Shinn, Michelle D; Tennant, Christopher; Walker, Richard; Williams, Gwyn; Wilson, Frederick

    2011-08-01

    Many novel applications in photon sciences require very high brightness and/or short pulses in the vacuum ultra-violet (VUV). Jefferson Lab has commissioned a UV oscillator with high gain and has transported the third harmonic of the UV to a user lab. The experimental performance of the UV FEL is much better than simulated performance in both gain and efficiency. This success is important for efforts to push towards higher gain FELs at short wavelengths where mirrors absorb strongly. We will report on efforts to characterize the UV laser and the VUV coherent harmonics as well as designs to lase directly in the VUV wavelength range.

  15. Start-To-End Injector and Linac Tolerance Studies for the BESSY FEL

    CERN Document Server

    Abo-Bakr, Michael; Knobloch, Jens; Kuske, Bettina; Meseck, Atoosa

    2004-01-01

    BESSY is proposing a Soft X-ray FEL user facility in Berlin, delivering short and stabile photon pulses in the wavelength range of 62 nm < λ < 1.2 nm by applying up to four cascaded High Gain Harmonic Generation (HGHG) stages. For optimization of the FEL performance of the cascaded HGHG stages extensive Start-to-End (S2E) simulations have been carried out. In order to test the quality of the chosen configuration with respect to the sensitivity against various error sources tolerance studies from the injector to the linac end have been performed. Procedures and results of these studies will be presented.

  16. Gain length dependence on phase shake in the VUV-FEL at the TESLA Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Pflueger, J. [DESY/HASYLAB, Hamburg (Germany); Schneidmiller, E.A. [Automatic Systems Corporation, Samara (Russian Federation); Pierini, P. [INFN, Milano (Italy)

    1995-12-31

    The TTF VUV FEL, which is in its design stage at DESY, consists of a 30 m long SASE FEL which will radiate around 6 nm, driven by a superconducting linac with final energy of 1 GeV. One of the important issues in its design is the undulator performance, which is studied in this paper. The present setup, including FODO lattice, is discussed in this paper. Results of simulations, including the realistic wiggler field errors and beam stearing, are presented. Dependence of the performance, in particular the gain and saturation length as well as the saturation peak power, on the wiggler field errors is discussed.

  17. 76 FR 1212 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

    Science.gov (United States)

    2011-01-07

    ... AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development... Eligibility of the Joint Biomedical Laboratory Research and Development and Clinical Science Research and... areas of biomedical, behavioral and clinical science research. The panel meeting will be open to the...

  18. 76 FR 79273 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

    Science.gov (United States)

    2011-12-21

    ... AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development... Eligibility of the Joint Biomedical Laboratory Research and Development and Clinical Science Research and... biomedical, behavioral, and clinical science research. The panel meeting will be open to the public for...

  19. Developments in cooperative learning: review of research

    Directory of Open Access Journals (Sweden)

    Robyn M. Gillies

    2014-10-01

    Full Text Available Cooperative learning, where students work in small groups to accomplish shared goals, is widely recognized as a teaching strategy that promotes learning and socialization among students from kindergarten through college and across different subject domains. It has been used successfully to promote reading and writing achievements, understanding and conceptual development in science classes, problem-solving in mathematics, and higher-order thinking and learning to name just a few. It has been shown to enhance students' willingness to work cooperatively and productively with others with diverse learning and adjustment needs and to enhance intergroup relations with those from culturally and ethnically different backgrounds. It has also been used as a teaching strategy to assist students to manage conflict and to help students identified as bullies learn appropriate interpersonal skills. In fact, it has been argued that cooperative learning experiences are crucial to preventing and alleviating many of the social problems related to children, adolescents, and young adults. There is no doubt that the benefits attributed to cooperative learning are widespread and numerous and it is the apparent success of this approach to learning that has led to it being acclaimed as one of the greatest educational innovations of recent times. The purpose of this paper is not only to review developments in research on cooperative learning but also to examine the factors that mediate and moderate its success. In particular, the review focuses on the types of student and teacher interactions generated and the key role talk plays in developing student thinking and learning, albeit through the expression of contrasting opinions or constructed shared meaning. The intention is to provide additional insights on how teachers can effectively utilize this pedagogical approach to teaching and learning in their classrooms.

  20. Developing an effective quantitative research proposal.

    Science.gov (United States)

    Merrill, Katreena Collette

    2011-01-01

    In 2010, the Infusion Nurses Society began work to identify research priorities for infusion nursing. Nurses need to understand the research process and become proficient in collaboration to promote research in their specialty. One of the most important components of conducting research is the written research proposal. A poorly written proposal may result in denial of funding, rejected publications, and prolonged discussion and revision at the institutional or ethics review board. This article provides an overview of the elements needed in a research proposal, identifies institutional review board requirements, and highlights important criteria for recruitment and consent of subjects.

  1. Development of survivin and tumor research

    Institute of Scientific and Technical Information of China (English)

    JI Yu-bin; LIU Guang-da; YU Lei; LI Hai-jiao; YANG Hai-fan; PANG Lin-lin

    2008-01-01

    Survivin was firstly separated in hybridization of Effector Cell Protease Receptor-1(EPR-1) cDNA in human genome by Yale University's Ambrosini in 1997, which is member of the inhibitor of apoptosis proteins (IAPS). Unlike other IAP protein, found during embryonic and fetal development, survivin wascompletely down-regulated and undetectable in normal adult tissues, and became prominentlyre expressed in all of the most common cancers. It through includes the cysteine/histidine rod-shaped viral IAP repetition sequence baculoviral IAP repeats(BIRs) the structure territory directly or intervenes Caspases the function to display indirectly its anti-perishes weakly the function, simultaneously it also is in the cell division process the chromosome traveler protein (chromosome passenger protein). There are three approaches by which survivin inhibits the processing of apoptosis: (1)inhibits processing of down stream effector caspase-3, caspase-7and caspase-9 in cell receiving apoptotic stimuls; (2)with the Smac/DIABLO function, sends the XIAP activeness to increase, XIAP through directly affects and restrains its function with caspases, achieved restrains function which perishes weakly; (3) through restrains p53 the function to block perishes weakly the process. Survivin expressed specificity and its function multiplicity. Survivin only expresses in tumor tissues and cannot be found in normal terminally differentiated tissues. This kind of expression is been extremely low the cell cycle strict regulation in the G1 time expression, the S time is G1 time 6 times, the G2/M time advances to 40 times, demonstrated its expression has the G2/M time dependence specificity. It has bi-function of inhibiting apoptosis and involving in cell cycle control. Survivin has found in most of tumor ceils in recently researches. Survivin expresses generally in all tumor cell line in the American State-run Cancer Research institute anti-tumor medicine screening procedure 60 different tumor

  2. 77 FR 26069 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

    Science.gov (United States)

    2012-05-02

    ... Development and Clinical Science Research and Development Services Scientific Merit Review Board, Notice of... Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit... science research. The panel meetings will be open to the public for approximately one-half hour at the...

  3. Outlook on Research in Education for Sustainable Development

    Science.gov (United States)

    Grasel, Cornelia; Bormann, Inka; Schutte, Kerstin; Trempler, Kati; Fischbach, Robert

    2013-01-01

    This article provides an overview of current research on Education for Sustainable Development (ESD). It shows a lack of correspondence between ESD research and recent debates in educational research. Research on ESD has established as a field of research with insufficient relations to other fields in educational research. Based on the overview…

  4. Developing a framework for critiquing health research

    OpenAIRE

    Caldwell, Kay; Henshaw, Lynne; Taylor, Gina

    2005-01-01

    A new framework for critiquing health-related research is presented in this article. More commonly used existing frameworks tend to have been formulated within the quantitative research paradigm. While frameworks for critiquing qualitative research exist, they are often complex and more suited to the needs of students engaged in advanced levels of study. The framework presented in this article addresses both quantitative and qualitative research within one list of questions. It is argued that...

  5. Cancer Prevention and Control Research Manpower Development

    Science.gov (United States)

    1999-10-01

    34 : problem areas such as self-care (Dodd & Dibble, lishing a multisite team to conduct research with a ’r 1993), communication ( Northouse & Wortman, 1990...Guidelines for collaborative research. Applied Nurs- Northouse , L.L., & Wortman, C.B. (1990). Models of helping and cop- ing Research, 2, 150-183. ing in

  6. The history of HDR research and development

    Energy Technology Data Exchange (ETDEWEB)

    Duchane, D.

    1998-12-31

    An energy source rivaling the sun exists in the form of the heat emanating from the interior of the earth. Although limited quantities of this geothermal energy are produced today by bringing natural hot fluids to the surface, most of the earth`s heat is trapped in hot dry rock (HDR). The application of hydraulic fracturing technology to tap this vast HDR resource was pioneered by Los Alamos National Laboratory beginning in 1970. Since that time, engineered geothermal reservoirs have been constructed and operated at numerous locations around the world. Major work at the US HDR facility at Fenton Hill, NM, and at the British HDR site in Cornwall, UK, has been completed, but advanced HDR field work continues at two sites on the island of Honshu in Japan and at Soultz in northeastern France. In addition, plans are currently being completed for the construction of an HDR system on the continent of Australia. Over the past three decades the worldwide research and development effort has taken HDR from its early conceptual stage to its present state as a demonstrated technology that is on the verge of becoming commercially feasible. Extended flow tests in the United States, Japan, and Europe have proven that sustained operation of HDR reservoirs is possible. In support of these field tests, an international body of scientists and engineers have pursued a variety of innovative approaches for assessing HDR resources, constructing and characterizing engineered geothermal reservoirs, and operating HDR systems. Taken together, these developments form a strong base upon which to build the practical HDR systems that will provide clean energy for the world in the 21st century.

  7. 7 CFR 948.35 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 948.35 Section 948.35... Order Regulating Handling Research and Development § 948.35 Research and development. The committee... development projects designed to assist, improve, or promote the marketing, distribution, and consumption...

  8. Research and Development Concerning Coalbed Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    William Ruckelshaus

    2008-09-30

    quality, most of it is discharged to surface drainages or to soil (for irrigation). CBNG water quality generally declines when moving from the Cheyenne River drainage northwestward to the Belle Fourche, Little Powder, and Powder River drainages and in the central and western part of the PRB, most CBNG water goes to evaporation-infiltration ponds or is discharged directly to surface drainages. Concerns center on the salinity of the water, usually measured as total dissolved solids (TDS), or electrical conductivity (EC) and sodium adsorption ratio (SAR). Other management options currently in use include injection, managed irrigation (with additives to mitigate the effects of high salinity), atomization, and treatment by reverse osmosis or ion exchange. A key water quality issue is the cumulative effect of numerous CBNG water discharges on the overall water quality of basin streams. This leads to one of the most contentious issues in CBNG development in Wyoming's PRB: Montana's concern about the potential downstream effects of water quality degradation on rivers flowing north into Montana. Many of the benefits and costs associated with CBNG development have been debated, but dealing with CBNG water quantity and quality arguably has been the most difficult of all the issues. Given the importance of these issues for continued development of CBNG resources in Wyoming and elsewhere, the DOE-NETL funded project presented here focuses on CBNG co-produced water management. The research was organized around nine separate, but interrelated, technical project tasks and one administrative task (Task 1). The nine technical project tasks were pursued by separate research teams at the University of Wyoming, but all nine tasks were coordinated to the extent possible in order to maximize information gained about CBNG co-produced waters. In addition to project management in Task 1, the key research tasks included: (2) estimating groundwater recharge rates in the PRB; (3

  9. Conservatism Research: Historical Development and Future Prospects

    Institute of Scientific and Technical Information of China (English)

    Sudipta Basu

    2009-01-01

    <正>1.Introduction and Summary Over the last decade,there has been much empirical research on Chinese accounting conservatism.This research started with Ball,Robin and Wu(2000)that was one o the first papers to apply modern research methods to Chinese data.In this paper,survey the early research on conservatism to provide the background and context for discussion of my dissertation paper,Basu(1997).I describe some lessons I have learn from the unexpected success of my dissertation,review recent Chinese research on

  10. Research and Development Concerning Coalbed Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    William Ruckelshaus

    2008-09-30

    quality, most of it is discharged to surface drainages or to soil (for irrigation). CBNG water quality generally declines when moving from the Cheyenne River drainage northwestward to the Belle Fourche, Little Powder, and Powder River drainages and in the central and western part of the PRB, most CBNG water goes to evaporation-infiltration ponds or is discharged directly to surface drainages. Concerns center on the salinity of the water, usually measured as total dissolved solids (TDS), or electrical conductivity (EC) and sodium adsorption ratio (SAR). Other management options currently in use include injection, managed irrigation (with additives to mitigate the effects of high salinity), atomization, and treatment by reverse osmosis or ion exchange. A key water quality issue is the cumulative effect of numerous CBNG water discharges on the overall water quality of basin streams. This leads to one of the most contentious issues in CBNG development in Wyoming's PRB: Montana's concern about the potential downstream effects of water quality degradation on rivers flowing north into Montana. Many of the benefits and costs associated with CBNG development have been debated, but dealing with CBNG water quantity and quality arguably has been the most difficult of all the issues. Given the importance of these issues for continued development of CBNG resources in Wyoming and elsewhere, the DOE-NETL funded project presented here focuses on CBNG co-produced water management. The research was organized around nine separate, but interrelated, technical project tasks and one administrative task (Task 1). The nine technical project tasks were pursued by separate research teams at the University of Wyoming, but all nine tasks were coordinated to the extent possible in order to maximize information gained about CBNG co-produced waters. In addition to project management in Task 1, the key research tasks included: (2) estimating groundwater recharge rates in the PRB; (3

  11. Research and Infrastructure Development Center for Nanomaterials Research

    Science.gov (United States)

    2009-05-01

    engineered in metallic magnetostrictive Fe(1-x)Gax/piezoelectric PMN-PT heterostructures; • Engineer an unusually large thermoelectric figure of merit “ZT...Department of Mechanical Engineering – Engineering Mechanics Introduction This research was focused both on the analytical and numerical study of...Single Electron Transistors Introduction The current hazardous sensors are too bulky, complex, and costly. Technological improvement in

  12. Three essays on research and development

    Science.gov (United States)

    Sanyal, Paroma

    The impact of institutional changes and market structure on research and development (R&D) and technical progress is controversial. My dissertation investigates the determinants of R&D in the context of institutional change. The first two papers address the impact of deregulation in the US electric utility industry on R&D. The third paper investigates the linkage between patenting and different funding sources and patent office attributes. The first paper, "Deregulation, Restructuring and Changing R&D Paradigms in the US Electric Utility Industry", investigates the linkage between market structures and the conduct of R&D in the US electric utility industry. The primary finding of this paper is that institutional and competition factors interact in a way that suggest that the occurrence of full deregulation, coupled with effective retail competition in the market may mitigate the problem of declining R&D expenditures in the face of deregulation. The second paper, "Powering a Green Progress: Environmental Research in the Absence of Regulatory Oversight" analyzes the impact of changing market structure on environmental R&D expenditures by IOUs in the electric utility industry. Conventional wisdom holds that increased competition would lead firms to cut back on R&D funds directed towards social goals, such as the environment. But these arguments fail to take account the threat of future environmental regulations and its influence on disciplining firms. Theory and empirical results from this paper suggest that under certain conditions, even with high monitoring costs, an environmental regulatory agency's threat of stricter future regulations will successfully stem the decrease in environmental R&D expenditures. My third paper, "Birth of a Patent: the Role of Parents, Nursemaids and Constraints", presents an integrated theoretical and empirical approach that models the effects of different sources of R&D funding and patent office attributes on the patenting process. The

  13. 7 CFR 925.45 - Production research and market research and development.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF SOUTHEASTERN CALIFORNIA Research and Market Development § 925.45 Production research and market research and development. The committee, with the approval of the... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research and market research and...

  14. 77 FR 75660 - Agency Information Collection Activities; Proposed Collection; Comments Requested: FEL Out-of...

    Science.gov (United States)

    2012-12-21

    ... Collection; Comments Requested: FEL Out-of-Business Records ACTION: 30-day notice. The Department of Justice... comment until January 22, 2013. This process is conducted in accordance with 5 CFR 1320.10. Written... the burden of the proposed collection of information, including the validity of the methodology and...

  15. Start-To-End Simulations of the Energy Recovery Linac Prototype FEL

    CERN Document Server

    Gerth, Christopher; Muratori, Bruno; Owen, Hywel; Thompson, Neil R

    2004-01-01

    Daresbury Laboratory is currently building an Energy Recovery Linac Prototype (ERLP) that serves as a testbed for the study of beam dynamics and accelerator technology important for the design and construction of the proposed 4th Generation Light Source (4GLS) project. Two major objectives for the ERLP are the operation of an oscillator infra-red FEL and demonstration of energy recovery from an electron bunch with an energy spread induced by the FEL. In this paper we present start-to-end simulations including the FEL of the ERLP. The beam dynamics in the high-brightness injector, which consists of a DC photocathode gun and a super-conducting booster, have been modelled using the particle tracking code ASTRA. After the main linac, in which the particles are accelerated to 35 MeV, particles have been tracked with the code ELEGANT. The 3D code GENESIS was used to model the FEL interaction with the electron beam. Different modes of operation and their impact on the design of the ERLP are discussed.

  16. Generation of doublet spectral lines at self-seeded X-ray FELs

    CERN Document Server

    Geloni, Gianluca; Saldin, Evgeni

    2010-01-01

    Self-seeding schemes, consisting of two undulators with a monochromator in between, aim to reduce the bandwidth of SASE X-ray FELs. We recently proposed a new method of monochromatization exploiting a single crystal in Bragg-transmission geometry for self-seeding in the hard X-ray range. A straightforward extension is to use such kind of monochromator setup with two -or more- crystals arranged in a series to spectrally filter the SASE radiation at two closely-spaced wavelengths within the FEL gain band. This allows for the production of doublet -or multiplet- spectral lines. Applications involve any process with a large change in cross section over a narrow wavelength range, as in multiple wavelength anomalous diffraction. Here we consider the simultaneous operation of the LCLS hard X-ray FEL at two closely spaced wavelengths. We present simulation results for the LCLS baseline, yielding fully coherent radiation shared between two longitudinal modes. Mode spacing can be easily tuned within the FEL gain band. ...

  17. An Electron Bunch Compressor Based on an FEL Interaction in the Far Infra Red

    OpenAIRE

    Gaupp, Andreas

    2013-01-01

    In this note an electron bunch compressor is proposed based on FEL type interaction of the electron bunch with far infrared (FIR) radiation. This mechanism maintains phase space density and thus requires a high quality electron beam to produce bunches of the length of a few ten micrometer.

  18. Microbunching Instability Effect Studies and Laser Heater Optimization for the SPARX FEL Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Vaccarezza, C.; Chiadroni, E.; Ferrario, M.; Giannessi, L.; Quattromini, M.; Ronsivalle, C.; Venturini, C.; Migliorati, M.; Dattoli, G.

    2010-05-23

    The effects of microbunching instability for the SPARX accelerator have been analyzed by means of numerical simulations. The laser heater counteracting action has been addressed in order to optimize the parameters of the compression system, either hybrid RF plus magnetic chicane or only magnetic, and possibly enhance the FEL performance.

  19. Mine-detection test facilities at TNO-FEL test location "Waalsdorp"

    NARCIS (Netherlands)

    Rhebergen, J.B.; Zwamborn, A.P.M.

    1998-01-01

    As part of the TNO-FEL Ultra-Wide-Band Ground-Penetrating-Radar (UWB-GPR) project, a test facility for controlled GPR experiments was planned. Construction of this sand-box test facility has recently been completed. At the same site another test facility, for evaluating various commercial of the

  20. Performance of the SASE amplifier of the TEU-FEL project

    NARCIS (Netherlands)

    Ernst, G.J.; Goldstein, J.C.

    1992-01-01

    The free-electron laser of the TEU-FEL project of the University of Twente will be driven by a photoinjector followed by a racetrack microtron. The injector, which is now under construction, will provide a very high-brightness electron beam with an energy of about 6 MeV. In phase I of the project, e

  1. Availability Performance and Considerations for LCLS X-Ray FEL at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Allen, W.B.; Brachmann, A.; Colocho, W.; Stanek, M.; Warren, J.; /SLAC

    2011-08-16

    The Linac Coherent Light Source (LCLS) is an X-ray Free Electron Laser (FEL) facility located at the SLAC National Accelerator Laboratory. LCLS has been in operation since spring 2009, and it has completed its 3rd user run. LCLS is the first in its class of X-ray FEL user facilities, and presents different availability challenges compared to storage ring light sources. This paper presents recent availability performance of the FEL as well as factors to consider when defining the operational availability figure of merit for user runs. During LCLS [1] user runs, an availability of 95% has been set as a goal. In run III, LCLS photon and electron beam systems achieved availabilities of 94.8% and 96.7%, respectively. The total availability goal can be distributed among subsystems to track performance and identify areas that need attention in order to maintain and improve hardware reliability and operational availability. Careful beam time accounting is needed to understand the distribution of down time. The LCLS complex includes multiple experimental hutches for X-ray science, and each user program has different requirements of a set of parameters that the FEL can be configured to deliver. Since each user may have different criteria for what is considered 'acceptable beam', the quality of the beam must be considered to determine the X-ray beam availability.

  2. The Gain and Efficiency Enhancement in Double-Undulator Fels Induced Betatron Oscillations

    NARCIS (Netherlands)

    Bazylev, V. A.; Tulupov, A. V.

    1993-01-01

    A new construction of a free-electron laser using induced betatron oscillations to increase the FEL gain or efficiency is proposed. Induced betatron oscillations are driven by an additional space-periodic magnetic field with a period close to that of electron betatron oscillations in an undulator

  3. Mine-detection test facilities at TNO-FEL test location "Waalsdorp"

    NARCIS (Netherlands)

    Rhebergen, J.B.; Zwamborn, A.P.M.

    1998-01-01

    As part of the TNO-FEL Ultra-Wide-Band Ground-Penetrating-Radar (UWB-GPR) project, a test facility for controlled GPR experiments was planned. Construction of this sand-box test facility has recently been completed. At the same site another test facility, for evaluating various commercial of the she

  4. Powerful electrostatic FEL: Regime of operation, recovery of the spent electron beam and high voltage generator

    Energy Technology Data Exchange (ETDEWEB)

    Boscolo, I. [Univ. and INFN, Milan (Italy); Gong, J. [Southwest Jiaotong Univ., Chengdu (China)

    1995-02-01

    FEL, driven by a Cockcroft-Walton electrostatic accelerator with the recovery of the spent electron beam, is proposed as powerful radiation source for plasma heating. The low gain and high gain regimes are compared in view of the recovery problem and the high gain regime is shown to be much more favourable. A new design of the onion Cockcroft-Walton is presented.

  5. Report on Implementing the Federal Cybersecurity Research and Development Strategy

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — In December 2011 the NSTC released Trustworthy Cyberspace: Strategic Plan for the Federal Cybersecurity Research and Development Program, outlining a vision for the...

  6. The Federal Big Data Research and Development Strategic Plan

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — Summary: This Plan is an important milestone in the Administrations Big Data Research and Development (R&D) Initiative

  7. 2016 Federal Cybersecurity Research and Development Strategic Plan

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — As part of the Presidents Cybersecurity National Action Plan (CNAP), the Administration released the 2016 Federal Cybersecurity Research and Development Strategic...

  8. 48 CFR 970.35 - Research and development contracting.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Research and development... SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Major System Acquisition 970.35 Research and development contracting. ...

  9. FDA Scientists Develop Mouse Model for Zika Research

    Science.gov (United States)

    ... news/fullstory_162111.html FDA Scientists Develop Mouse Model for Zika Research Researchers hope strain of mice will help speed development of vaccines, treatments To use the sharing features on this page, please enable JavaScript. (*this news ...

  10. 48 CFR 27.408 - Cosponsored research and development activities.

    Science.gov (United States)

    2010-10-01

    ....408 Cosponsored research and development activities. (a) In contracts involving cosponsored research... objectives of the contract. Since the purpose of the cosponsored research and development, the legitimate... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Cosponsored research and...

  11. The Challenges of Developing Research Resources for Leading Vietnamese Universities

    Science.gov (United States)

    Nguyen, Thi Lan Huong

    2013-01-01

    This paper examines the challenges of developing research resources for leading Vietnamese universities. The first part of the paper presents the background to the study, including literature review on the challenges to research resources development, and describes the research questions and research methods. The next part provides empirical…

  12. 7 CFR 932.45 - Production research and marketing research and development projects.

    Science.gov (United States)

    2010-01-01

    ...), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Research and Development § 932.45 Production research and marketing research and development projects. (a) The following activities... necessary to effectively regulate such activity. (b) In recommending marketing research and development...

  13. The cat lipocalin Fel d 7 and its cross-reactivity with the dog lipocalin Can f 1.

    Science.gov (United States)

    Apostolovic, D; Sánchez-Vidaurre, S; Waden, K; Curin, M; Grundström, J; Gafvelin, G; Cirkovic Velickovic, T; Grönlund, H; Thomas, W R; Valenta, R; Hamsten, C; van Hage, M

    2016-10-01

    We investigated the prevalence of sensitization to the cat lipocalin Fel d 7 among 140 cat-sensitized Swedish patients and elucidated its allergenic activity and cross-reactivity with the dog lipocalin Can f 1. Sixty-five of 140 patients had IgE to rFel d 7 whereof 60 also had IgE to rCan f 1. A moderate correlation between IgE levels to rFel d 7 and rCan f 1 was found. rFel d 7 activated basophils in vitro and inhibited IgE binding to rCan f 1 in 4 of 13 patients, whereas rCan f 1 inhibited IgE binding to rFel d 7 in 7 of 13 patients. Fel d 7 and Can f 1 showed high similarities in protein structure and epitopes in common were found using cross-reactive antisera. Fel d 7 is a common allergen in a Swedish cat-sensitized population that cross-reacts with Can f 1, and may contribute to symptoms in cat- but also in dog-allergic patients.

  14. E-Government Service Research Development: A Literature Review

    OpenAIRE

    M. Mahmudul Hasan

    2015-01-01

    Electronic service in the domain of e-Government has been gaining research attention over past two decades. This paper reports on a literature review of the published e-Government service research and provides an analysis of the research development in terms of research themes, regional context, research perspective, data analysis method, and research approach. The results of this analysis can serve the e-Government research communities as a means of understanding the e-Government service res...

  15. 40 CFR 270.65 - Research, development, and demonstration permits.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Research, development, and... Special Forms of Permits § 270.65 Research, development, and demonstration permits. (a) The Administrator may issue a research, development, and demonstration permit for any hazardous waste treatment facility...

  16. 40 CFR 258.4 - Research, development, and demonstration permits.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Research, development, and...) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS General § 258.4 Research, development, and... State may issue a research, development, and demonstration permit for a new MSWLF unit, existing MSWLF...

  17. 17 CFR 256.188 - Research, development, or demonstration expenditures.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Research, development, or... COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 4. Deferred Debits § 256.188 Research, development, or... of all expenditures for research, development or demonstration undertaken by or sponsored through the...

  18. 40 CFR 720.36 - Exemption for research and development.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Exemption for research and development... chemical substance is manufactured or imported only in small quantities solely for research and development... associated with research and development activities, of any risk to health, identified under paragraph (b) of...

  19. 77 FR 42298 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-07-18

    ... Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy... Appointment as a Member of the Biomass Research and Development Technical Advisory Committee. SUMMARY: In... soliciting nominations for candidates to fill vacancies on the Biomass Research and Development...

  20. 48 CFR 216.104-70 - Research and development.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Research and development... Contract Types § 216.104-70 Research and development. Follow the procedures at PGI 216.104-70 for selecting the appropriate research and development contract type....

  1. 76 FR 44648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-07-26

    ..., DC on July 14, 2011. Paul Fontaine, Director (A), Research & Technology Development. BILLING CODE... Federal Aviation Administration Research, Engineering and Development Advisory Committee Pursuant to... given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee....

  2. 76 FR 12404 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-03-07

    ..., DC, on February 24, 2011. Paul Fontaine, Director (A), Research & Technology Development. BILLING... Federal Aviation Administration Research, Engineering and Development Advisory Committee Pursuant to... given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee....

  3. 7 CFR 930.48 - Research, market development and promotion.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research, market development and promotion. 930.48... Order Regulating Handling Research, Market Development and Promotion § 930.48 Research, market development and promotion. The Board, with the approval of the Secretary, may establish or provide for...

  4. 7 CFR 906.37 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 906.37 Section 906.37... LOWER RIO GRANDE VALLEY IN TEXAS Order Regulating Handling Research and Development § 906.37 Research and development. The committee, with the approval of the Secretary, may establish or provide for...

  5. 7 CFR 924.45 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 924.45 Section 924.45... and development. The committee, with the approval of the Secretary, may establish or provide for the establishment of production research, and marketing research and development projects designed to...

  6. 7 CFR 929.45 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 929.45 Section 929.45... development. (a) The committee, with the approval of the Secretary, may establish or provide for the establishment of production research, marketing research, and market development projects, including...

  7. 7 CFR 984.46 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 984.46 Section 984.46... Regulating Handling Administrative Body § 984.46 Research and development. The Board, with the approval of... research and development projects, and marketing promotion, including paid advertising, designed to...

  8. 7 CFR 993.37 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 993.37 Section 993.37... CALIFORNIA Order Regulating Handling Prune Marketing Committee § 993.37 Research and development. The... research and development projects designed to assist, improve, or promote the marketing, distribution,...

  9. 7 CFR 958.47 - Research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 958.47 Section 958.47... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Research and Development § 958.47 Research and development. (a) The committee with the approval of the Secretary, may...

  10. Optimizing x-ray mirror thermal performance using variable length cooling for second generation FELs

    Science.gov (United States)

    Hardin, Corey L.; Srinivasan, Venkat N.; Amores, Lope; Kelez, Nicholas M.; Morton, Daniel S.; Stefan, Peter M.; Nicolas, Josep; Zhang, Lin; Cocco, Daniele

    2016-09-01

    The success of the LCLS led to an interest across a number of disciplines in the scientific community including physics, chemistry, biology, and material science. Fueled by this success, SLAC National Accelerator Laboratory is developing a new high repetition rate free electron laser, LCLS-II, a superconducting linear accelerator capable of a repetition rate up to 1 MHz. Undulators will be optimized for 200 to 1300 eV soft X-rays, and for 1000 to 5000 eV hard X-rays. To absorb spontaneous radiation, higher harmonic energies and deflect the x-ray beam to various end stations, the transport and diagnostics system includes grazing incidence plane mirrors on both the soft and Hard X-ray beamline. To deliver the FEL beam with minimal power loss and wavefront distortion, we need mirrors of height errors below 1nm rms in operational conditions. We need to mitigate the thermal load effects due to the high repetition rate. The absorbed thermal profile is highly dependent on the beam divergence, and this is a function of the photon energy. To address this complexity, we developed a mirror cradle with variable length cooling and first order curve correction. Mirror figure error is minimized using variable length water-cooling through a gallium-indium eutectic bath. Curve correction is achieved with an off-axis bender that will be described in details. We present the design features, mechanical analysis and results from optical and mechanical tests of a prototype assembly, with particular regards to the figure sensitivity to bender corrections.

  11. An action research approach to curriculum development

    Directory of Open Access Journals (Sweden)

    Phil Riding

    1995-01-01

    Full Text Available Action research has been used in many areas where an understanding of complex social situations has been sought in order to improve the quality of life. Among these are industrial, health and community work settings. Kurt Lewin, often cited as the originator of action research, used the methodology in his work with people affected by post- war social problems. Action research approaches to educational research were adopted in the late 60s and early 70s by the ‘teacher- researcher’ movement in the secondary education sector. This sought to bring the practising classroom teacher into the research process as the most effective person to identify problems and to find solutions.We believe that an action research approach can contribute very positively to activity within the tertiary sector concerned with teaching quality issues, and with national Teaching Quality Assessment initiatives. As 'reflective practitioners', we can achieve greater ownership of the evaluative process by becoming systematically self-assessing, alongside, and feeding into, external assessment processes.

  12. The role of radiation reaction in Lienard-Wiechert description of FEL interaction

    Energy Technology Data Exchange (ETDEWEB)

    Kimel, I.; Elias, L.R. [Univ. of Central Florida, Orlando, FL (United States)

    1995-12-31

    The most common theoretical analysis of the FEL interaction is based on the set of equations consisting of Lorentz and wave equations. This approach explains most of FEL features and, in particular, works well to describe operation in the amplifier mode. In that approach however, there are some difficulties in describing operation in oscillator mode, as well as self amplified spontaneous emission. In particular, it is not possible to describe the start up stage since there is no wave to start with. It is clear that a different approach is required in such situations. That is why we have pursued the study of the FEL interaction in the framework of Lorentz plus Lienard-Wiechert equations. The Lienard-Wiechert Lorentz equation approach however, presents its own set of problems. Variation in energy of the electrons is given exclusively by the Lorentz equation. Thus, the energy lost due to the radiation process is not properly taken into account. This, of course, is a long standing problem in classical electrodynamics. In order to restore energy conservation radiation reaction has to be incorporated into the framework. The first question in that regard has to do with which form of the radiation reaction equations is the most convenient for computations in the FEL process. This has to do with the fact that historically, radiation reaction has been added in an ad hoc manner instead of being derived from the fundamental equations. Another problem discussed is how to take into account the radiation reaction in a collective manner in the interaction among electrons. Also discussed is the radiation reaction vis a vi the coherence properties of the FEL process.

  13. A helical optical for circular polarized UV-FEL project at the UVSOR

    Energy Technology Data Exchange (ETDEWEB)

    Hama, Hiroyuki [Institute for Molecular Science, Okazaki (Japan)

    1995-12-31

    Most of existing storage ring free electron lasers (SRFEL) are restricted those performances by degradation of mirrors in optical cavities. In general, the SRFEL gain at the short wavelength region with high energy electrons is quite low, and the high reflectivity mirrors such as dielectric multilayer mirrors are therefore required. The mirror degradation is considered as a result of irradiation of higher harmonic photons that are simultaneously emitted from planar optical klystron (OK) type undulators, which are commonly used in SRFEL. This problem is getting severer as the lasing wavelength becomes shorter. The UVSOR-FEL had been originally scheduled to be shutdown by 1996 because another undulator project for spectroscopic studies with circular polarized photon would take the FEL`s place. According to suggestion of the insertion device group of the SPring-8, we have designed a helical undulator that is able to vary degree and direction of the polarization easily. In addition, the undulator can be converted into a helical OK by replacing magnets at the center part of undulator in order to coexist with further FEL experiments. Using a calculated magnetic field for magnet configurations of the OK mode, the radiation spectrum at wide wavelength range was simulated by a Fourier transform of Lienard-Wiechert potentials. As a matter of course, some higher harmonics are radiated on the off-axis angle. However it was found out that the higher harmonics is almost negligible as far as inside a solid angle of the Gaussian laser mode. Moreover the gain at the UV region of 250 nm is expected to be much higher than our present FEL because of high brilliant fundamental radiation. The calculated spatial distribution of higher harmonics and the estimated instantaneous gain is presented. Advantages of the helical OK for SRFEL will be discussed in view of our experience, and a possibility of application two-color experiment with SR will be also mentioned.

  14. Exploratory Research and Development Fund, FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    The Lawrence Berkeley Laboratory Exploratory R D Fund FY 1990 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the projects supported and summarizes their accomplishments. It constitutes a part of an Exploratory R D Fund (ERF) planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The research areas covered in this report are: Accelerator and fusion research; applied science; cell and molecular biology; chemical biodynamics; chemical sciences; earth sciences; engineering; information and computing sciences; materials sciences; nuclear science; physics and research medicine and radiation biophysics.

  15. Laser-plasma interactions from thin tapes for high-energy electron accelerators and seeding compact FELs

    Science.gov (United States)

    Shaw, Brian Henry

    This thesis comprises a detailed investigation of the physics of using a plasma mirror (PM) from a tape by reflecting ultrashort pulses from a laser-triggered surface plasma. The tapes used in the characterization of the PM are VHS and computer data storage tape. The tapes are 6.6 m (computer storage tape) and 15 m (VHS) thick. Each tape is 0.5 inches wide, and 10s of meters of tape are spooled using a tape drive; providing thousands of shots on a single reel of tape. The amount of reflected energy of the PM was studied for different input intensities. The fluence was varied by translating the focus of the laser upstream and downstream of the tape, which changed the spot size on the tape surface and hence changed the fluence. This study measured reflectances from both sides of the two tapes, and for input light of both s and p-polarizations. Lastly, an analytic model was developed to understand the reflectance as a function of fluence for each tape material and polarization. Another application that benefits from the advancements of LPA technology is an LPAbased FEL. By sending a high quality electron bunch through an undulator (a periodic structure of positive and negative magnetic poles), the electrons oscillate transversely to the propagation axis and produce radiation. The 1.5 m THUNDER undulator at the BELLA Center has been commissioned using electron beams of 400MeV beams with broad energy spread (35%). To produce a coherent LPA-based FEL, the beam quality would need to improve to sub-percent level energy spread. A seed source could be used to help induce bunching of the electron beam within the undulator. This thesis described the experimental investigation of the physics of using solid-based surface high-harmonic generation (SHHG) from a thin tape as a possible seed source for an FEL. A thin tape placed within centimeters of the undulator's entrance could act as a harmonic generating source, while simultaneously transmitting an electron beam. This removes

  16. Current developments in toxicological research on arsenic.

    Science.gov (United States)

    Bolt, Hermann M

    2013-01-01

    There is a plethora of recent publications on all aspects relevant to the toxicology of arsenic (As). Over centuries exposures to arsenic continue to be a major public health problem in many countries. In particular, the occurrence of high As concentrations in groundwater of Southeast Asia receives now much attention. Therefore, arsenic is a high-priority matter for toxicological research. Key exposure to As are (traditional) medicines, combustion of As-rich coal, presence of As in groundwater, and pollution due to mining activities. As-induced cardiovascular disorders and carcinogenesis present themselves as a major research focus. The high priority of this issue is now recognized politically in a number of countries, research funds have been made available. Also experimental research on toxicokinetics and toxicodynamics and on modes of toxic action is moving very rapidly. The matter is of high regulatory concern, and effective preventive measures are required in a number of countries.

  17. Federal Research and Development Funding: FY2009

    Science.gov (United States)

    2009-05-22

    Interagency Autism Coordinating Committee. d. Separate account in the Interior/Environment appropriations for NIEHS research activities related to...critical research priorities of the Administration that include livestock production, food safety, crop protection, and human nutrition . Included in the...Crop Production 200.6 191.0 Food Safety 104.5 105.8 Livestock Protection 82.4 68.8 Crop Protection 196.0 188.7 Human Nutrition 85.3 79.5

  18. Market-oriented research and competence development

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2002-01-01

    At MAPP, we are convinced that market orientation is a good thing. We know that it contributes to better company performance, in the food sector and elsewhere. We also believe in market orientation in our work. Among other things, this implies that our research has to be topical and relevant...... in the eyes of potential users. This report shows examples of research where we believe this to be the case....

  19. Federal Research and Development Funding: FY2017

    Science.gov (United States)

    2016-06-24

    centers in the field of subsurface geochemistry and geophysics. A new activity in computational chemical sciences would receive $14 million. Funding...other purposes.” 61 The NSF is a primary source of federal support for U.S. university research, especially in mathematics and computer science . It...Gonzalez; and CRS Report R44170, The National Science Foundation: FY2016 Budget Request and Funding History , by Heather B. Gonzalez. Federal Research and

  20. Federal Research and Development Funding: FY2012

    Science.gov (United States)

    2011-03-29

    trends in R&D. These include the Office of International Science and Engineering ( OISE ) and the newly created Integrated NSF Support Promoting...activities59 and (2) decreasing distinctions between historically disparate academic fields.60 OISE seeks to support international collaborations and...research by individuals or teams of researchers. The Administration proposes $58 million for OISE in FY2012, an increase of $10.2 million (21.3%) over the

  1. Operational Research(ers in development: Growing a new generation of operational researchers

    Directory of Open Access Journals (Sweden)

    I Durbach

    2013-06-01

    Full Text Available This paper explores the theme of training operational research (OR practitioners in South Africa by critically evaluating a Masters program in Operational Research in Development (ORD, launched in 2005 at the University of Cape Town. This program was specifically focused on applying OR to the problems of the developing world in general and Africa in particular. We describe the program and review the practical work undertaken by students participating in the program. Topics range widely across domains including health (antimalarial drug resistance; poverty (food banking; governance (NGO management structures and monitoring of local government performance and sustainable livelihoods (spaza shop operations. We use the review to highlight strengths and weaknesses of the program, as well as challenges faced in the OR education in South Africa at a postgraduate level.

  2. Fuel Fabrication Capability Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J.; Burkes, Douglas

    2014-04-17

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors. Therefore, the overriding motivation behind the FFC R&D program described in this plan is to foster closer integration between fuel design and fabrication to reduce programmatic risk. These motivating factors are all interrelated, and progress addressing one will aid understanding of the others. The FFC R&D needs fall into two principal categories, 1) baseline process optimization, to refine the existing fabrication technologies, and 2) manufacturing process alternatives, to evaluate new fabrication technologies that could provide improvements in quality, repeatability, material utilization, or cost. The FFC R&D Plan examines efforts currently under way in regard to coupon, foil, plate, and fuel element manufacturing, and provides recommendations for a number of R&D topics that are of high priority but not currently funded (i.e., knowledge gaps). The plan ties all FFC R&D efforts into a unified vision that supports the overall Convert Program schedule in general, and the fabrication schedule leading up to the MP-1 and FSP-1 irradiation experiments specifically. The fabrication technology decision gates and down-selection logic and schedules are tied to the schedule for fabricating the MP-1 fuel plates, which will provide the necessary data to make a final fuel fabrication process down-selection. Because of the short turnaround between MP-1 and the follow-on FSP-1 and MP-2 experiments, the suite of specimen types that will be available for MP-1 will be the same as those available for FSP-1 and MP-2. Therefore, the only opportunity to explore parameter space and alternative processing

  3. Human Research Program Science Management: Overview of Research and Development Activities

    Science.gov (United States)

    Charles, John B.

    2007-01-01

    An overview of research and development activities of NASA's Human Research Science Management Program is presented. The topics include: 1) Human Research Program Goals; 2) Elements and Projects within HRP; 3) Development and Maintenance of Priorities; 4) Acquisition and Evaluation of Research and Technology Proposals; and 5) Annual Reviews

  4. Nearshore Placement Webinar: Nearshore Placement Research & Development

    Science.gov (United States)

    2012-11-29

    Huntington Beach (SANDAG) Shark River Inlet (NAN) Assateague Island, MD (NAB) Positive Recreational Feature Small Dispersive Placements Innovative...Coordination Act  Endangered Species Act  Coastal Zone Management Act – Sec. 307(c)  Marine Protection, Research, and Sanctuaries Act

  5. Digital library research : current developments and trends

    OpenAIRE

    Shiri, Ali

    2003-01-01

    This column gives an overview of current trends in digital library research under the following headings: digital library architecture, systems, tools and technologies; digital content and collections; metadata; interoperability; standards; knowledge organisation systems; users and usability; legal, organisational, economic, and social issues in digital libraries.

  6. Engineering research, development and technology report

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    1999-02-01

    Nineteen ninety-eight has been a transition year for Engineering, as we have moved from our traditional focus on thrust areas to a more focused approach with research centers. These five new centers of excellence collectively comprise Engineering's Science and Technology program. This publication summarizes our formative year under this new structure. Let me start by talking about the differences between a thrust area and a research center. The thrust area is more informal, combining an important technology with programmatic priorities. In contrast, a research center is directly linked to an Engineering core technology. It is the purer model, for it is more enduring yet has the scope to be able to adapt quickly to evolving programmatic priorities. To put it another way, the mission of a thrust area was often to grow the programs in conjunction with a technology, whereas the task of a research center is to vigorously grow our core technologies. By cultivating each core technology, we in turn enable long-term growth of new programs.

  7. Research and development program, fiscal year 1974

    Energy Technology Data Exchange (ETDEWEB)

    1972-04-01

    The biomedical program of the Laboratory of Nuclear Medicine and Radiation Biology for Fiscal Year 1974 is conducted within the scope of the following categories: Effects of Radiation of Living Organisms; Molecular and Cellular Radiobiology; Land and Fresh Water Environmental Sciences; Radiological and Health Physics and Instrumentation; and Nuclear Medical Research. (ACR)

  8. Tracking Engineering Education Research and Development

    Directory of Open Access Journals (Sweden)

    Bill Williams

    2012-04-01

    Full Text Available In recent years, bibliometric analysis of publications has been receiving growing attention in engineering education research as an approach that can bring a number of benefits. In this paper two such forms, taxonomical analysis and citation analysis, are applied to papers from the first 2011 number of IEEE Transactions on Education (21 papers and from the two 2011 numbers of the ASEE-published Advances in Engineering Education (22 papers. In the former approach, seven taxonomical dimensions are used to characterize the papers and in the second the references cited in the 43 papers were studied so as to analyze how the researchers were informed by previous studies.The results suggest that the silo effect identified by Wankat for disciplinary engineering education journals in 2009 was still apparent in the IEEE Transactions on Education in 2011. The Advances in Engineering Education papers show a wide range of cited references, including reference disciplines outside of engineering education, and this suggests that research published there is likely to be informed by a broad range of previous studies which may be interpreted as a sign of a growing maturity of engineering education as a research discipline.

  9. Society for Research in Child Development Newsletter, 2001.

    Science.gov (United States)

    Reid, Pamela Trotman, Ed.

    2001-01-01

    This document consists of the four 2001 issues of a newsletter disseminating information on the Society for Research in Child Development (SRCD) and providing a forum for important news, research, and information concerning advancements in child growth and development research. Each issue of the newsletter includes announcements and notices of…

  10. Society for Research in Child Development Newsletter, 2003.

    Science.gov (United States)

    Reid, Pamela Trotman, Ed.; Ehart, Bridget, Ed.

    2003-01-01

    This document consists of the four 2003 issues of a newsletter disseminating information on the Society for Research in Child Development (SRCD) and providing a forum for important news, research, and information concerning advancement in child growth and development research. Each issue of the newsletter includes announcements and notices of…

  11. Society for Research in Child Development Newsletter, 2002.

    Science.gov (United States)

    Reid, Pamela Trotman, Ed.; Tucker, Thelma, Ed.

    2002-01-01

    This document consists of the four 2002 issues of a newsletter disseminating information on the Society for Research in Child Development (SRCD) and providing a forum for important news, research, and information concerning advancement in child growth and development research. Each issue of the newsletter includes announcements and notices of…

  12. Multidimensional filter banks and wavelets research developments and applications

    CERN Document Server

    Levy, Bernard

    1997-01-01

    Multidimensional Filter Banks and Wavelets: Reserach Developments and Applications brings together in one place important contributions and up-to-date research results in this important area. Multidimensional Filter Banks and Wavelets: Research Developments and Applications serves as an excellent reference, providing insight into some of the most important research issues in the field.

  13. 7 CFR 923.45 - Marketing research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing research and development. 923.45 Section 923... CHERRIES GROWN IN DESIGNATED COUNTIES IN WASHINGTON Order Regulating Handling Research § 923.45 Marketing... the establishment of marketing research and development projects designed to assist, improve,...

  14. 7 CFR 922.45 - Marketing research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing research and development. 922.45 Section 922... GROWN IN DESIGNATED COUNTIES IN WASHINGTON Order Regulating Handling Research § 922.45 Marketing... the establishment of marketing research and development projects designed to assist, improve,...

  15. 10 CFR 1021.212 - Research, development, demonstration, and testing.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Research, development, demonstration, and testing. 1021... ACT IMPLEMENTING PROCEDURES DOE Decisionmaking § 1021.212 Research, development, demonstration, and testing. (a) This section applies to the adoption and application of programs that involve research...

  16. 48 CFR 35.009 - Subcontracting research and development effort.

    Science.gov (United States)

    2010-10-01

    ... ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.009 Subcontracting research and development effort. Since the selection of R&D contractors is substantially based on... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Subcontracting research...

  17. 48 CFR 927.408 - Cosponsored research and development activities.

    Science.gov (United States)

    2010-10-01

    ... Cosponsored research and development activities. Because of the Department of Energy's statutory duties to disseminate data first produced under its contracts for research, development, and demonstration, the... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Cosponsored research and...

  18. 77 FR 20377 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-04-04

    ... of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory... Open Webinar. SUMMARY: This notice announces an open webinar of the Biomass Research and Development..., members of the public are welcome to observe the business of the Biomass Research and...

  19. Educational Research and Development: How to Influence School Practices.

    Science.gov (United States)

    Gagne, Robert M.

    1980-01-01

    Suggested are basic ways in which a system of educational research and development may meet the demand for successful R&D, from the formulation of research questions to the utilization of results. Stressed are local ownership of school-based R&D, the development of applied research efforts, and the utilization of outcomes. (RAO)

  20. Federal Plan for Advanced Networking Research and Development

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — In the four decades since Federal research first enabled computers to send and receive data over networks, U.S. government research and development R and D in...